Merge commit 'eee/mesa-es' into android

1 files changed, 490 insertions, 0 deletions

diff --git a/src/gallium/drivers/nv30/nv30_shader.h b/src/gallium/drivers/nv30/nv30_shader.h
new file mode 100644
index 0000000000..dd3a36f78f
--- /dev/null
+++ b/src/gallium/drivers/nv30/nv30_shader.h
@@ -0,0 +1,490 @@
+#ifndef __NV30_SHADER_H__
+#define __NV30_SHADER_H__
+
+/* Vertex programs instruction set
+ *
+ * 128bit opcodes, split into 4 32-bit ones for ease of use.
+ *
+ * Non-native instructions
+ *   ABS - MOV + NV40_VP_INST0_DEST_ABS
+ *   POW - EX2 + MUL + LG2
+ *   SUB - ADD, second source negated
+ *   SWZ - MOV
+ *   XPD -  
+ *
+ * Register access
+ *   - Only one INPUT can be accessed per-instruction (move extras into TEMPs)
+ *   - Only one CONST can be accessed per-instruction (move extras into TEMPs)
+ *
+ * Relative Addressing
+ *   According to the value returned for
+ *   MAX_PROGRAM_NATIVE_ADDRESS_REGISTERS_ARB
+ *
+ *   there are only two address registers available.  The destination in the
+ *   ARL instruction is set to TEMP <n> (The temp isn't actually written).
+ *
+ *   When using vanilla ARB_v_p, the proprietary driver will squish both the
+ *   available ADDRESS regs into the first hardware reg in the X and Y
+ *   components.
+ *
+ *   To use an address reg as an index into consts, the CONST_SRC is set to
+ *   (const_base + offset) and INDEX_CONST is set.
+ *
+ *   To access the second address reg use ADDR_REG_SELECT_1. A particular
+ *   component of the address regs is selected with ADDR_SWZ.
+ *
+ *   Only one address register can be accessed per instruction.
+ *
+ * Conditional execution (see NV_vertex_program{2,3} for details) Conditional
+ * execution of an instruction is enabled by setting COND_TEST_ENABLE, and
+ * selecting the condition which will allow the test to pass with
+ * COND_{FL,LT,...}.  It is possible to swizzle the values in the condition
+ * register, which allows for testing against an individual component.
+ *
+ * Branching:
+ *
+ *   The BRA/CAL instructions seem to follow a slightly different opcode
+ *   layout.  The destination instruction ID (IADDR) overlaps a source field.
+ *   Instruction ID's seem to be numbered based on the UPLOAD_FROM_ID FIFO
+ *   command, and is incremented automatically on each UPLOAD_INST FIFO
+ *   command.
+ *
+ *   Conditional branching is achieved by using the condition tests described
+ *   above.  There doesn't appear to be dedicated looping instructions, but
+ *   this can be done using a temp reg + conditional branching.
+ *
+ *   Subroutines may be uploaded before the main program itself, but the first
+ *   executed instruction is determined by the PROGRAM_START_ID FIFO command.
+ *
+ */
+
+/* DWORD 0 */
+
+#define NV30_VP_INST_ADDR_REG_SELECT_1        (1 << 24)
+#define NV30_VP_INST_SRC2_ABS           (1 << 23) /* guess */
+#define NV30_VP_INST_SRC1_ABS           (1 << 22) /* guess */
+#define NV30_VP_INST_SRC0_ABS           (1 << 21) /* guess */
+#define NV30_VP_INST_VEC_RESULT         (1 << 20)
+#define NV30_VP_INST_DEST_TEMP_ID_SHIFT        16
+#define NV30_VP_INST_DEST_TEMP_ID_MASK        (0x0F << 16)
+#define NV30_VP_INST_COND_UPDATE_ENABLE        (1<<15)
+#define NV30_VP_INST_VEC_DEST_TEMP_MASK      (0xF << 16)
+#define NV30_VP_INST_COND_TEST_ENABLE        (1<<14)
+#define NV30_VP_INST_COND_SHIFT          11
+#define NV30_VP_INST_COND_MASK          (0x07 << 11)
+#  define NV30_VP_INST_COND_FL  0 /* guess */  
+#  define NV30_VP_INST_COND_LT  1  
+#  define NV30_VP_INST_COND_EQ  2
+#  define NV30_VP_INST_COND_LE  3
+#  define NV30_VP_INST_COND_GT  4
+#  define NV30_VP_INST_COND_NE  5
+#  define NV30_VP_INST_COND_GE  6
+#  define NV30_VP_INST_COND_TR  7 /* guess */
+#define NV30_VP_INST_COND_SWZ_X_SHIFT        9
+#define NV30_VP_INST_COND_SWZ_X_MASK        (0x03 <<  9)
+#define NV30_VP_INST_COND_SWZ_Y_SHIFT        7
+#define NV30_VP_INST_COND_SWZ_Y_MASK        (0x03 <<  7)
+#define NV30_VP_INST_COND_SWZ_Z_SHIFT        5
+#define NV30_VP_INST_COND_SWZ_Z_MASK        (0x03 <<  5)
+#define NV30_VP_INST_COND_SWZ_W_SHIFT        3
+#define NV30_VP_INST_COND_SWZ_W_MASK        (0x03 <<  3)
+#define NV30_VP_INST_COND_SWZ_ALL_SHIFT        3
+#define NV30_VP_INST_COND_SWZ_ALL_MASK        (0xFF <<  3)
+#define NV30_VP_INST_ADDR_SWZ_SHIFT        1
+#define NV30_VP_INST_ADDR_SWZ_MASK        (0x03 <<  1)
+#define NV30_VP_INST_SCA_OPCODEH_SHIFT        0
+#define NV30_VP_INST_SCA_OPCODEH_MASK        (0x01 <<  0)
+
+/* DWORD 1 */
+#define NV30_VP_INST_SCA_OPCODEL_SHIFT        28
+#define NV30_VP_INST_SCA_OPCODEL_MASK        (0x0F << 28)
+#  define NV30_VP_INST_OP_NOP  0x00
+#  define NV30_VP_INST_OP_RCP  0x02
+#  define NV30_VP_INST_OP_RCC  0x03
+#  define NV30_VP_INST_OP_RSQ  0x04
+#  define NV30_VP_INST_OP_EXP  0x05
+#  define NV30_VP_INST_OP_LOG  0x06
+#  define NV30_VP_INST_OP_LIT  0x07
+#  define NV30_VP_INST_OP_BRA  0x09
+#  define NV30_VP_INST_OP_CAL  0x0B
+#  define NV30_VP_INST_OP_RET  0x0C
+#  define NV30_VP_INST_OP_LG2  0x0D
+#  define NV30_VP_INST_OP_EX2  0x0E
+#  define NV30_VP_INST_OP_SIN  0x0F
+#  define NV30_VP_INST_OP_COS  0x10
+#define NV30_VP_INST_VEC_OPCODE_SHIFT        23
+#define NV30_VP_INST_VEC_OPCODE_MASK        (0x1F << 23)
+#  define NV30_VP_INST_OP_NOPV  0x00
+#  define NV30_VP_INST_OP_MOV  0x01
+#  define NV30_VP_INST_OP_MUL  0x02
+#  define NV30_VP_INST_OP_ADD  0x03
+#  define NV30_VP_INST_OP_MAD  0x04
+#  define NV30_VP_INST_OP_DP3  0x05
+#  define NV30_VP_INST_OP_DP4  0x07
+#  define NV30_VP_INST_OP_DPH  0x06
+#  define NV30_VP_INST_OP_DST  0x08
+#  define NV30_VP_INST_OP_MIN  0x09
+#  define NV30_VP_INST_OP_MAX  0x0A
+#  define NV30_VP_INST_OP_SLT  0x0B
+#  define NV30_VP_INST_OP_SGE  0x0C
+#  define NV30_VP_INST_OP_ARL  0x0D
+#  define NV30_VP_INST_OP_FRC  0x0E
+#  define NV30_VP_INST_OP_FLR  0x0F
+#  define NV30_VP_INST_OP_SEQ  0x10
+#  define NV30_VP_INST_OP_SFL  0x11
+#  define NV30_VP_INST_OP_SGT  0x12
+#  define NV30_VP_INST_OP_SLE  0x13
+#  define NV30_VP_INST_OP_SNE  0x14
+#  define NV30_VP_INST_OP_STR  0x15
+#  define NV30_VP_INST_OP_SSG  0x16
+#  define NV30_VP_INST_OP_ARR  0x17
+#  define NV30_VP_INST_OP_ARA  0x18
+#define NV30_VP_INST_CONST_SRC_SHIFT        14
+#define NV30_VP_INST_CONST_SRC_MASK        (0xFF << 14)
+#define NV30_VP_INST_INPUT_SRC_SHIFT        9    /*NV20*/
+#define NV30_VP_INST_INPUT_SRC_MASK        (0x0F <<  9)  /*NV20*/
+#  define NV30_VP_INST_IN_POS  0    /* These seem to match the bindings specified in */
+#  define NV30_VP_INST_IN_WEIGHT  1    /* the ARB_v_p spec (2.14.3.1) */
+#  define NV30_VP_INST_IN_NORMAL  2    
+#  define NV30_VP_INST_IN_COL0  3    /* Should probably confirm them all though */
+#  define NV30_VP_INST_IN_COL1  4
+#  define NV30_VP_INST_IN_FOGC  5
+#  define NV30_VP_INST_IN_TC0  8
+#  define NV30_VP_INST_IN_TC(n)  (8+n)
+#define NV30_VP_INST_SRC0H_SHIFT        0    /*NV20*/
+#define NV30_VP_INST_SRC0H_MASK          (0x1FF << 0)  /*NV20*/
+
+/* Please note: the IADDR fields overlap other fields because they are used
+ * only for branch instructions.  See Branching: label above
+ *
+ * DWORD 2
+ */
+#define NV30_VP_INST_SRC0L_SHIFT        26    /*NV20*/
+#define NV30_VP_INST_SRC0L_MASK         (0x3F  <<26)  /* NV30_VP_SRC0_LOW_MASK << 26 */
+#define NV30_VP_INST_SRC1_SHIFT         11    /*NV20*/
+#define NV30_VP_INST_SRC1_MASK          (0x7FFF<<11)  /*NV20*/
+#define NV30_VP_INST_SRC2H_SHIFT        0    /*NV20*/
+#define NV30_VP_INST_SRC2H_MASK          (0x7FF << 0)  /* NV30_VP_SRC2_HIGH_MASK >> 4*/
+#define NV30_VP_INST_IADDR_SHIFT        2
+#define NV30_VP_INST_IADDR_MASK          (0xF <<  28)   /* NV30_VP_SRC2_LOW_MASK << 28 */
+
+/* DWORD 3 */
+#define NV30_VP_INST_SRC2L_SHIFT        28    /*NV20*/
+#define NV30_VP_INST_SRC2L_MASK          (0x0F  <<28)  /*NV20*/
+#define NV30_VP_INST_STEMP_WRITEMASK_SHIFT      24
+#define NV30_VP_INST_STEMP_WRITEMASK_MASK      (0x0F << 24)
+#define NV30_VP_INST_VTEMP_WRITEMASK_SHIFT      20
+#define NV30_VP_INST_VTEMP_WRITEMASK_MASK      (0x0F << 20)
+#define NV30_VP_INST_SDEST_WRITEMASK_SHIFT      16
+#define NV30_VP_INST_SDEST_WRITEMASK_MASK      (0x0F << 16)
+#define NV30_VP_INST_VDEST_WRITEMASK_SHIFT      12    /*NV20*/
+#define NV30_VP_INST_VDEST_WRITEMASK_MASK      (0x0F << 12)  /*NV20*/
+#define NV30_VP_INST_DEST_SHIFT        2
+#define NV30_VP_INST_DEST_MASK        (0x0F <<  2)
+#  define NV30_VP_INST_DEST_POS  0
+#  define NV30_VP_INST_DEST_BFC0  1
+#  define NV30_VP_INST_DEST_BFC1  2
+#  define NV30_VP_INST_DEST_COL0  3
+#  define NV30_VP_INST_DEST_COL1  4
+#  define NV30_VP_INST_DEST_FOGC  5
+#  define NV30_VP_INST_DEST_PSZ   6
+#  define NV30_VP_INST_DEST_TC(n)  (8+n)
+
+#define NV30_VP_INST_LAST                           (1 << 0)
+
+/* Useful to split the source selection regs into their pieces */
+#define NV30_VP_SRC0_HIGH_SHIFT                                                6
+#define NV30_VP_SRC0_HIGH_MASK                                        0x00007FC0
+#define NV30_VP_SRC0_LOW_MASK                                         0x0000003F
+#define NV30_VP_SRC2_HIGH_SHIFT                                                4
+#define NV30_VP_SRC2_HIGH_MASK                                        0x00007FF0
+#define NV30_VP_SRC2_LOW_MASK                                         0x0000000F
+
+
+/* Source-register definition - matches NV20 exactly */
+#define NV30_VP_SRC_NEGATE          (1<<14)
+#define NV30_VP_SRC_SWZ_X_SHIFT        12
+#define NV30_VP_SRC_REG_SWZ_X_MASK        (0x03  <<12)
+#define NV30_VP_SRC_SWZ_Y_SHIFT        10
+#define NV30_VP_SRC_REG_SWZ_Y_MASK        (0x03  <<10)
+#define NV30_VP_SRC_SWZ_Z_SHIFT        8
+#define NV30_VP_SRC_REG_SWZ_Z_MASK        (0x03  << 8)
+#define NV30_VP_SRC_SWZ_W_SHIFT        6
+#define NV30_VP_SRC_REG_SWZ_W_MASK        (0x03  << 6)
+#define NV30_VP_SRC_REG_SWZ_ALL_SHIFT        6
+#define NV30_VP_SRC_REG_SWZ_ALL_MASK        (0xFF  << 6)
+#define NV30_VP_SRC_TEMP_SRC_SHIFT        2
+#define NV30_VP_SRC_REG_TEMP_ID_MASK        (0x0F  << 0)
+#define NV30_VP_SRC_REG_TYPE_SHIFT        0
+#define NV30_VP_SRC_REG_TYPE_MASK        (0x03  << 0)
+#define NV30_VP_SRC_REG_TYPE_TEMP  1
+#define NV30_VP_SRC_REG_TYPE_INPUT  2
+#define NV30_VP_SRC_REG_TYPE_CONST  3 /* guess */
+
+/*
+ * Each fragment program opcode appears to be comprised of 4 32-bit values.
+ *
+ *   0 - Opcode, output reg/mask, ATTRIB source
+ *   1 - Source 0
+ *   2 - Source 1
+ *   3 - Source 2
+ *
+ * There appears to be no special difference between result regs and temp regs.
+ *     result.color == R0.xyzw
+ *     result.depth == R1.z
+ * When the fragprog contains instructions to write depth, NV30_TCL_PRIMITIVE_3D_UNK1D78=0
+ * otherwise it is set to 1.
+ *
+ * Constants are inserted directly after the instruction that uses them.
+ * 
+ * It appears that it's not possible to use two input registers in one
+ * instruction as the input sourcing is done in the instruction dword
+ * and not the source selection dwords.  As such instructions such as:
+ * 
+ *     ADD result.color, fragment.color, fragment.texcoord[0];
+ *
+ * must be split into two MOV's and then an ADD (nvidia does this) but
+ * I'm not sure why it's not just one MOV and then source the second input
+ * in the ADD instruction..
+ *
+ * Negation of the full source is done with NV30_FP_REG_NEGATE, arbitrary
+ * negation requires multiplication with a const.
+ *
+ * Arbitrary swizzling is supported with the exception of SWIZZLE_ZERO/SWIZZLE_ONE
+ * The temp/result regs appear to be initialised to (0.0, 0.0, 0.0, 0.0) as SWIZZLE_ZERO
+ * is implemented simply by not writing to the relevant components of the destination.
+ *
+ * Conditional execution
+ *   TODO
+ * 
+ * Non-native instructions:
+ *   LIT
+ *   LRP - MAD+MAD
+ *   SUB - ADD, negate second source
+ *   RSQ - LG2 + EX2
+ *   POW - LG2 + MUL + EX2
+ *   SCS - COS + SIN
+ *   XPD
+ */
+
+//== Opcode / Destination selection ==
+#define NV30_FP_OP_PROGRAM_END          (1 << 0)
+#define NV30_FP_OP_OUT_REG_SHIFT        1
+#define NV30_FP_OP_OUT_REG_MASK          (31 << 1)  /* uncertain */
+/* Needs to be set when writing outputs to get expected result.. */
+#define NV30_FP_OP_OUT_REG_HALF          (1 << 7)
+#define NV30_FP_OP_COND_WRITE_ENABLE        (1 << 8)
+#define NV30_FP_OP_OUTMASK_SHIFT        9
+#define NV30_FP_OP_OUTMASK_MASK          (0xF << 9)
+#  define NV30_FP_OP_OUT_X  (1<<9)
+#  define NV30_FP_OP_OUT_Y  (1<<10)
+#  define NV30_FP_OP_OUT_Z  (1<<11)
+#  define NV30_FP_OP_OUT_W  (1<<12)
+/* Uncertain about these, especially the input_src values.. it's possible that
+ * they can be dynamically changed.
+ */
+#define NV30_FP_OP_INPUT_SRC_SHIFT        13
+#define NV30_FP_OP_INPUT_SRC_MASK        (15 << 13)
+#  define NV30_FP_OP_INPUT_SRC_POSITION  0x0
+#  define NV30_FP_OP_INPUT_SRC_COL0  0x1
+#  define NV30_FP_OP_INPUT_SRC_COL1  0x2
+#  define NV30_FP_OP_INPUT_SRC_FOGC  0x3
+#  define NV30_FP_OP_INPUT_SRC_TC0    0x4
+#  define NV30_FP_OP_INPUT_SRC_TC(n)  (0x4 + n)
+#define NV30_FP_OP_TEX_UNIT_SHIFT        17
+#define NV30_FP_OP_TEX_UNIT_MASK        (0xF << 17) /* guess */
+#define NV30_FP_OP_PRECISION_SHIFT        22
+#define NV30_FP_OP_PRECISION_MASK        (3 << 22)
+#   define NV30_FP_PRECISION_FP32  0
+#   define NV30_FP_PRECISION_FP16  1
+#   define NV30_FP_PRECISION_FX12  2
+#define NV30_FP_OP_OPCODE_SHIFT          24
+#define NV30_FP_OP_OPCODE_MASK          (0x3F << 24)
+#  define NV30_FP_OP_OPCODE_NOP  0x00
+#  define NV30_FP_OP_OPCODE_MOV  0x01
+#  define NV30_FP_OP_OPCODE_MUL  0x02
+#  define NV30_FP_OP_OPCODE_ADD  0x03
+#  define NV30_FP_OP_OPCODE_MAD  0x04
+#  define NV30_FP_OP_OPCODE_DP3  0x05
+#  define NV30_FP_OP_OPCODE_DP4  0x06
+#  define NV30_FP_OP_OPCODE_DST  0x07
+#  define NV30_FP_OP_OPCODE_MIN  0x08
+#  define NV30_FP_OP_OPCODE_MAX  0x09
+#  define NV30_FP_OP_OPCODE_SLT  0x0A
+#  define NV30_FP_OP_OPCODE_SGE  0x0B
+#  define NV30_FP_OP_OPCODE_SLE  0x0C
+#  define NV30_FP_OP_OPCODE_SGT  0x0D
+#  define NV30_FP_OP_OPCODE_SNE  0x0E
+#  define NV30_FP_OP_OPCODE_SEQ  0x0F
+#  define NV30_FP_OP_OPCODE_FRC  0x10
+#  define NV30_FP_OP_OPCODE_FLR  0x11
+#  define NV30_FP_OP_OPCODE_KIL  0x12
+#  define NV30_FP_OP_OPCODE_PK4B   0x13
+#  define NV30_FP_OP_OPCODE_UP4B   0x14
+#  define NV30_FP_OP_OPCODE_DDX  0x15 /* can only write XY */
+#  define NV30_FP_OP_OPCODE_DDY  0x16 /* can only write XY */
+#  define NV30_FP_OP_OPCODE_TEX  0x17
+#  define NV30_FP_OP_OPCODE_TXP  0x18
+#  define NV30_FP_OP_OPCODE_TXD  0x19
+#  define NV30_FP_OP_OPCODE_RCP  0x1A
+#  define NV30_FP_OP_OPCODE_RSQ  0x1B
+#  define NV30_FP_OP_OPCODE_EX2  0x1C
+#  define NV30_FP_OP_OPCODE_LG2  0x1D
+#  define NV30_FP_OP_OPCODE_LIT  0x1E
+#  define NV30_FP_OP_OPCODE_LRP  0x1F
+#  define NV30_FP_OP_OPCODE_STR  0x20 
+#  define NV30_FP_OP_OPCODE_SFL  0x21
+#  define NV30_FP_OP_OPCODE_COS  0x22
+#  define NV30_FP_OP_OPCODE_SIN  0x23
+#  define NV30_FP_OP_OPCODE_PK2H   0x24
+#  define NV30_FP_OP_OPCODE_UP2H   0x25
+#  define NV30_FP_OP_OPCODE_POW  0x26
+#  define NV30_FP_OP_OPCODE_PK4UB  0x27
+#  define NV30_FP_OP_OPCODE_UP4UB  0x28
+#  define NV30_FP_OP_OPCODE_PK2US  0x29
+#  define NV30_FP_OP_OPCODE_UP2US  0x2A
+#  define NV30_FP_OP_OPCODE_DP2A   0x2E
+#  define NV30_FP_OP_OPCODE_TXB  0x31
+#  define NV30_FP_OP_OPCODE_RFL  0x36
+#  define NV30_FP_OP_OPCODE_DIV  0x3A
+#define NV30_FP_OP_OUT_SAT          (1 << 31)
+
+/* high order bits of SRC0 */
+#define NV30_FP_OP_OUT_ABS          (1 << 29)
+#define NV30_FP_OP_COND_SWZ_W_SHIFT        27
+#define NV30_FP_OP_COND_SWZ_W_MASK        (3 << 27)
+#define NV30_FP_OP_COND_SWZ_Z_SHIFT        25
+#define NV30_FP_OP_COND_SWZ_Z_MASK        (3 << 25)
+#define NV30_FP_OP_COND_SWZ_Y_SHIFT        23
+#define NV30_FP_OP_COND_SWZ_Y_MASK        (3 << 23)
+#define NV30_FP_OP_COND_SWZ_X_SHIFT        21
+#define NV30_FP_OP_COND_SWZ_X_MASK        (3 << 21)
+#define NV30_FP_OP_COND_SWZ_ALL_SHIFT        21
+#define NV30_FP_OP_COND_SWZ_ALL_MASK        (0xFF << 21)
+#define NV30_FP_OP_COND_SHIFT          18
+#define NV30_FP_OP_COND_MASK          (0x07 << 18)
+#  define NV30_FP_OP_COND_FL  0
+#  define NV30_FP_OP_COND_LT  1
+#  define NV30_FP_OP_COND_EQ  2
+#  define NV30_FP_OP_COND_LE  3
+#  define NV30_FP_OP_COND_GT  4
+#  define NV30_FP_OP_COND_NE  5
+#  define NV30_FP_OP_COND_GE  6
+#  define NV30_FP_OP_COND_TR  7
+
+/* high order bits of SRC1 */
+#define NV30_FP_OP_DST_SCALE_SHIFT        28
+#define NV30_FP_OP_DST_SCALE_MASK        (3 << 28)
+#define NV30_FP_OP_DST_SCALE_1X                                                0
+#define NV30_FP_OP_DST_SCALE_2X                                                1
+#define NV30_FP_OP_DST_SCALE_4X                                                2
+#define NV30_FP_OP_DST_SCALE_8X                                                3
+#define NV30_FP_OP_DST_SCALE_INV_2X                                            5
+#define NV30_FP_OP_DST_SCALE_INV_4X                                            6
+#define NV30_FP_OP_DST_SCALE_INV_8X                                            7
+
+
+/* high order bits of SRC2 */
+#define NV30_FP_OP_INDEX_INPUT          (1 << 30)
+
+//== Register selection ==
+#define NV30_FP_REG_TYPE_SHIFT          0
+#define NV30_FP_REG_TYPE_MASK          (3 << 0)
+#  define NV30_FP_REG_TYPE_TEMP  0
+#  define NV30_FP_REG_TYPE_INPUT  1
+#  define NV30_FP_REG_TYPE_CONST  2
+#define NV30_FP_REG_SRC_SHIFT          2 /* uncertain */
+#define NV30_FP_REG_SRC_MASK          (31 << 2)
+#define NV30_FP_REG_SRC_HALF          (1 << 8)
+#define NV30_FP_REG_SWZ_ALL_SHIFT        9
+#define NV30_FP_REG_SWZ_ALL_MASK        (255 << 9)
+#define NV30_FP_REG_SWZ_X_SHIFT          9
+#define NV30_FP_REG_SWZ_X_MASK          (3 << 9)
+#define NV30_FP_REG_SWZ_Y_SHIFT          11
+#define NV30_FP_REG_SWZ_Y_MASK          (3 << 11)
+#define NV30_FP_REG_SWZ_Z_SHIFT          13
+#define NV30_FP_REG_SWZ_Z_MASK          (3 << 13)
+#define NV30_FP_REG_SWZ_W_SHIFT          15
+#define NV30_FP_REG_SWZ_W_MASK          (3 << 15)
+#  define NV30_FP_SWIZZLE_X  0
+#  define NV30_FP_SWIZZLE_Y  1
+#  define NV30_FP_SWIZZLE_Z  2
+#  define NV30_FP_SWIZZLE_W  3
+#define NV30_FP_REG_NEGATE          (1 << 17)
+
+#define NV30SR_NONE	0
+#define NV30SR_OUTPUT	1
+#define NV30SR_INPUT	2
+#define NV30SR_TEMP	3
+#define NV30SR_CONST	4
+
+struct nv30_sreg {
+	int type;
+	int index;
+
+	int dst_scale;
+
+	int negate;
+	int abs;
+	int swz[4];
+
+	int cc_update;
+	int cc_update_reg;
+	int cc_test;
+	int cc_test_reg;
+	int cc_swz[4];
+};
+
+static INLINE struct nv30_sreg
+nv30_sr(int type, int index)
+{
+	struct nv30_sreg temp = {
+		.type = type,
+		.index = index,
+		.dst_scale = DEF_SCALE,
+		.abs = 0,
+		.negate = 0,
+		.swz = { 0, 1, 2, 3 },
+		.cc_update = 0,
+		.cc_update_reg = 0,
+		.cc_test = DEF_CTEST,
+		.cc_test_reg = 0,
+		.cc_swz = { 0, 1, 2, 3 },
+	};
+	return temp;
+}
+
+static INLINE struct nv30_sreg
+nv30_sr_swz(struct nv30_sreg src, int x, int y, int z, int w)
+{
+	struct nv30_sreg dst = src;
+
+	dst.swz[SWZ_X] = src.swz[x];
+	dst.swz[SWZ_Y] = src.swz[y];
+	dst.swz[SWZ_Z] = src.swz[z];
+	dst.swz[SWZ_W] = src.swz[w];
+	return dst;
+}
+
+static INLINE struct nv30_sreg
+nv30_sr_neg(struct nv30_sreg src)
+{
+	src.negate = !src.negate;
+	return src;
+}
+
+static INLINE struct nv30_sreg
+nv30_sr_abs(struct nv30_sreg src)
+{
+	src.abs = 1;
+	return src;
+}
+
+static INLINE struct nv30_sreg
+nv30_sr_scale(struct nv30_sreg src, int scale)
+{
+	src.dst_scale = scale;
+	return src;
+}
+
+#endif