diff options
Diffstat (limited to 'src/gallium/drivers/nv30/nv30_shader.h')
| -rw-r--r-- | src/gallium/drivers/nv30/nv30_shader.h | 490 |
1 files changed, 490 insertions, 0 deletions
diff --git a/src/gallium/drivers/nv30/nv30_shader.h b/src/gallium/drivers/nv30/nv30_shader.h new file mode 100644 index 0000000000..dd3a36f78f --- /dev/null +++ b/src/gallium/drivers/nv30/nv30_shader.h @@ -0,0 +1,490 @@ +#ifndef __NV30_SHADER_H__ +#define __NV30_SHADER_H__ + +/* Vertex programs instruction set + * + * 128bit opcodes, split into 4 32-bit ones for ease of use. + * + * Non-native instructions + * ABS - MOV + NV40_VP_INST0_DEST_ABS + * POW - EX2 + MUL + LG2 + * SUB - ADD, second source negated + * SWZ - MOV + * XPD - + * + * Register access + * - Only one INPUT can be accessed per-instruction (move extras into TEMPs) + * - Only one CONST can be accessed per-instruction (move extras into TEMPs) + * + * Relative Addressing + * According to the value returned for + * MAX_PROGRAM_NATIVE_ADDRESS_REGISTERS_ARB + * + * there are only two address registers available. The destination in the + * ARL instruction is set to TEMP <n> (The temp isn't actually written). + * + * When using vanilla ARB_v_p, the proprietary driver will squish both the + * available ADDRESS regs into the first hardware reg in the X and Y + * components. + * + * To use an address reg as an index into consts, the CONST_SRC is set to + * (const_base + offset) and INDEX_CONST is set. + * + * To access the second address reg use ADDR_REG_SELECT_1. A particular + * component of the address regs is selected with ADDR_SWZ. + * + * Only one address register can be accessed per instruction. + * + * Conditional execution (see NV_vertex_program{2,3} for details) Conditional + * execution of an instruction is enabled by setting COND_TEST_ENABLE, and + * selecting the condition which will allow the test to pass with + * COND_{FL,LT,...}. It is possible to swizzle the values in the condition + * register, which allows for testing against an individual component. + * + * Branching: + * + * The BRA/CAL instructions seem to follow a slightly different opcode + * layout. The destination instruction ID (IADDR) overlaps a source field. + * Instruction ID's seem to be numbered based on the UPLOAD_FROM_ID FIFO + * command, and is incremented automatically on each UPLOAD_INST FIFO + * command. + * + * Conditional branching is achieved by using the condition tests described + * above. There doesn't appear to be dedicated looping instructions, but + * this can be done using a temp reg + conditional branching. + * + * Subroutines may be uploaded before the main program itself, but the first + * executed instruction is determined by the PROGRAM_START_ID FIFO command. + * + */ + +/* DWORD 0 */ + +#define NV30_VP_INST_ADDR_REG_SELECT_1 (1 << 24) +#define NV30_VP_INST_SRC2_ABS (1 << 23) /* guess */ +#define NV30_VP_INST_SRC1_ABS (1 << 22) /* guess */ +#define NV30_VP_INST_SRC0_ABS (1 << 21) /* guess */ +#define NV30_VP_INST_VEC_RESULT (1 << 20) +#define NV30_VP_INST_DEST_TEMP_ID_SHIFT 16 +#define NV30_VP_INST_DEST_TEMP_ID_MASK (0x0F << 16) +#define NV30_VP_INST_COND_UPDATE_ENABLE (1<<15) +#define NV30_VP_INST_VEC_DEST_TEMP_MASK (0xF << 16) +#define NV30_VP_INST_COND_TEST_ENABLE (1<<14) +#define NV30_VP_INST_COND_SHIFT 11 +#define NV30_VP_INST_COND_MASK (0x07 << 11) +# define NV30_VP_INST_COND_FL 0 /* guess */ +# define NV30_VP_INST_COND_LT 1 +# define NV30_VP_INST_COND_EQ 2 +# define NV30_VP_INST_COND_LE 3 +# define NV30_VP_INST_COND_GT 4 +# define NV30_VP_INST_COND_NE 5 +# define NV30_VP_INST_COND_GE 6 +# define NV30_VP_INST_COND_TR 7 /* guess */ +#define NV30_VP_INST_COND_SWZ_X_SHIFT 9 +#define NV30_VP_INST_COND_SWZ_X_MASK (0x03 << 9) +#define NV30_VP_INST_COND_SWZ_Y_SHIFT 7 +#define NV30_VP_INST_COND_SWZ_Y_MASK (0x03 << 7) +#define NV30_VP_INST_COND_SWZ_Z_SHIFT 5 +#define NV30_VP_INST_COND_SWZ_Z_MASK (0x03 << 5) +#define NV30_VP_INST_COND_SWZ_W_SHIFT 3 +#define NV30_VP_INST_COND_SWZ_W_MASK (0x03 << 3) +#define NV30_VP_INST_COND_SWZ_ALL_SHIFT 3 +#define NV30_VP_INST_COND_SWZ_ALL_MASK (0xFF << 3) +#define NV30_VP_INST_ADDR_SWZ_SHIFT 1 +#define NV30_VP_INST_ADDR_SWZ_MASK (0x03 << 1) +#define NV30_VP_INST_SCA_OPCODEH_SHIFT 0 +#define NV30_VP_INST_SCA_OPCODEH_MASK (0x01 << 0) + +/* DWORD 1 */ +#define NV30_VP_INST_SCA_OPCODEL_SHIFT 28 +#define NV30_VP_INST_SCA_OPCODEL_MASK (0x0F << 28) +# define NV30_VP_INST_OP_NOP 0x00 +# define NV30_VP_INST_OP_RCP 0x02 +# define NV30_VP_INST_OP_RCC 0x03 +# define NV30_VP_INST_OP_RSQ 0x04 +# define NV30_VP_INST_OP_EXP 0x05 +# define NV30_VP_INST_OP_LOG 0x06 +# define NV30_VP_INST_OP_LIT 0x07 +# define NV30_VP_INST_OP_BRA 0x09 +# define NV30_VP_INST_OP_CAL 0x0B +# define NV30_VP_INST_OP_RET 0x0C +# define NV30_VP_INST_OP_LG2 0x0D +# define NV30_VP_INST_OP_EX2 0x0E +# define NV30_VP_INST_OP_SIN 0x0F +# define NV30_VP_INST_OP_COS 0x10 +#define NV30_VP_INST_VEC_OPCODE_SHIFT 23 +#define NV30_VP_INST_VEC_OPCODE_MASK (0x1F << 23) +# define NV30_VP_INST_OP_NOPV 0x00 +# define NV30_VP_INST_OP_MOV 0x01 +# define NV30_VP_INST_OP_MUL 0x02 +# define NV30_VP_INST_OP_ADD 0x03 +# define NV30_VP_INST_OP_MAD 0x04 +# define NV30_VP_INST_OP_DP3 0x05 +# define NV30_VP_INST_OP_DP4 0x07 +# define NV30_VP_INST_OP_DPH 0x06 +# define NV30_VP_INST_OP_DST 0x08 +# define NV30_VP_INST_OP_MIN 0x09 +# define NV30_VP_INST_OP_MAX 0x0A +# define NV30_VP_INST_OP_SLT 0x0B +# define NV30_VP_INST_OP_SGE 0x0C +# define NV30_VP_INST_OP_ARL 0x0D +# define NV30_VP_INST_OP_FRC 0x0E +# define NV30_VP_INST_OP_FLR 0x0F +# define NV30_VP_INST_OP_SEQ 0x10 +# define NV30_VP_INST_OP_SFL 0x11 +# define NV30_VP_INST_OP_SGT 0x12 +# define NV30_VP_INST_OP_SLE 0x13 +# define NV30_VP_INST_OP_SNE 0x14 +# define NV30_VP_INST_OP_STR 0x15 +# define NV30_VP_INST_OP_SSG 0x16 +# define NV30_VP_INST_OP_ARR 0x17 +# define NV30_VP_INST_OP_ARA 0x18 +#define NV30_VP_INST_CONST_SRC_SHIFT 14 +#define NV30_VP_INST_CONST_SRC_MASK (0xFF << 14) +#define NV30_VP_INST_INPUT_SRC_SHIFT 9 /*NV20*/ +#define NV30_VP_INST_INPUT_SRC_MASK (0x0F << 9) /*NV20*/ +# define NV30_VP_INST_IN_POS 0 /* These seem to match the bindings specified in */ +# define NV30_VP_INST_IN_WEIGHT 1 /* the ARB_v_p spec (2.14.3.1) */ +# define NV30_VP_INST_IN_NORMAL 2 +# define NV30_VP_INST_IN_COL0 3 /* Should probably confirm them all though */ +# define NV30_VP_INST_IN_COL1 4 +# define NV30_VP_INST_IN_FOGC 5 +# define NV30_VP_INST_IN_TC0 8 +# define NV30_VP_INST_IN_TC(n) (8+n) +#define NV30_VP_INST_SRC0H_SHIFT 0 /*NV20*/ +#define NV30_VP_INST_SRC0H_MASK (0x1FF << 0) /*NV20*/ + +/* Please note: the IADDR fields overlap other fields because they are used + * only for branch instructions. See Branching: label above + * + * DWORD 2 + */ +#define NV30_VP_INST_SRC0L_SHIFT 26 /*NV20*/ +#define NV30_VP_INST_SRC0L_MASK (0x3F <<26) /* NV30_VP_SRC0_LOW_MASK << 26 */ +#define NV30_VP_INST_SRC1_SHIFT 11 /*NV20*/ +#define NV30_VP_INST_SRC1_MASK (0x7FFF<<11) /*NV20*/ +#define NV30_VP_INST_SRC2H_SHIFT 0 /*NV20*/ +#define NV30_VP_INST_SRC2H_MASK (0x7FF << 0) /* NV30_VP_SRC2_HIGH_MASK >> 4*/ +#define NV30_VP_INST_IADDR_SHIFT 2 +#define NV30_VP_INST_IADDR_MASK (0xF << 28) /* NV30_VP_SRC2_LOW_MASK << 28 */ + +/* DWORD 3 */ +#define NV30_VP_INST_SRC2L_SHIFT 28 /*NV20*/ +#define NV30_VP_INST_SRC2L_MASK (0x0F <<28) /*NV20*/ +#define NV30_VP_INST_STEMP_WRITEMASK_SHIFT 24 +#define NV30_VP_INST_STEMP_WRITEMASK_MASK (0x0F << 24) +#define NV30_VP_INST_VTEMP_WRITEMASK_SHIFT 20 +#define NV30_VP_INST_VTEMP_WRITEMASK_MASK (0x0F << 20) +#define NV30_VP_INST_SDEST_WRITEMASK_SHIFT 16 +#define NV30_VP_INST_SDEST_WRITEMASK_MASK (0x0F << 16) +#define NV30_VP_INST_VDEST_WRITEMASK_SHIFT 12 /*NV20*/ +#define NV30_VP_INST_VDEST_WRITEMASK_MASK (0x0F << 12) /*NV20*/ +#define NV30_VP_INST_DEST_SHIFT 2 +#define NV30_VP_INST_DEST_MASK (0x0F << 2) +# define NV30_VP_INST_DEST_POS 0 +# define NV30_VP_INST_DEST_BFC0 1 +# define NV30_VP_INST_DEST_BFC1 2 +# define NV30_VP_INST_DEST_COL0 3 +# define NV30_VP_INST_DEST_COL1 4 +# define NV30_VP_INST_DEST_FOGC 5 +# define NV30_VP_INST_DEST_PSZ 6 +# define NV30_VP_INST_DEST_TC(n) (8+n) + +#define NV30_VP_INST_LAST (1 << 0) + +/* Useful to split the source selection regs into their pieces */ +#define NV30_VP_SRC0_HIGH_SHIFT 6 +#define NV30_VP_SRC0_HIGH_MASK 0x00007FC0 +#define NV30_VP_SRC0_LOW_MASK 0x0000003F +#define NV30_VP_SRC2_HIGH_SHIFT 4 +#define NV30_VP_SRC2_HIGH_MASK 0x00007FF0 +#define NV30_VP_SRC2_LOW_MASK 0x0000000F + + +/* Source-register definition - matches NV20 exactly */ +#define NV30_VP_SRC_NEGATE (1<<14) +#define NV30_VP_SRC_SWZ_X_SHIFT 12 +#define NV30_VP_SRC_REG_SWZ_X_MASK (0x03 <<12) +#define NV30_VP_SRC_SWZ_Y_SHIFT 10 +#define NV30_VP_SRC_REG_SWZ_Y_MASK (0x03 <<10) +#define NV30_VP_SRC_SWZ_Z_SHIFT 8 +#define NV30_VP_SRC_REG_SWZ_Z_MASK (0x03 << 8) +#define NV30_VP_SRC_SWZ_W_SHIFT 6 +#define NV30_VP_SRC_REG_SWZ_W_MASK (0x03 << 6) +#define NV30_VP_SRC_REG_SWZ_ALL_SHIFT 6 +#define NV30_VP_SRC_REG_SWZ_ALL_MASK (0xFF << 6) +#define NV30_VP_SRC_TEMP_SRC_SHIFT 2 +#define NV30_VP_SRC_REG_TEMP_ID_MASK (0x0F << 0) +#define NV30_VP_SRC_REG_TYPE_SHIFT 0 +#define NV30_VP_SRC_REG_TYPE_MASK (0x03 << 0) +#define NV30_VP_SRC_REG_TYPE_TEMP 1 +#define NV30_VP_SRC_REG_TYPE_INPUT 2 +#define NV30_VP_SRC_REG_TYPE_CONST 3 /* guess */ + +/* + * Each fragment program opcode appears to be comprised of 4 32-bit values. + * + * 0 - Opcode, output reg/mask, ATTRIB source + * 1 - Source 0 + * 2 - Source 1 + * 3 - Source 2 + * + * There appears to be no special difference between result regs and temp regs. + * result.color == R0.xyzw + * result.depth == R1.z + * When the fragprog contains instructions to write depth, NV30_TCL_PRIMITIVE_3D_UNK1D78=0 + * otherwise it is set to 1. + * + * Constants are inserted directly after the instruction that uses them. + * + * It appears that it's not possible to use two input registers in one + * instruction as the input sourcing is done in the instruction dword + * and not the source selection dwords. As such instructions such as: + * + * ADD result.color, fragment.color, fragment.texcoord[0]; + * + * must be split into two MOV's and then an ADD (nvidia does this) but + * I'm not sure why it's not just one MOV and then source the second input + * in the ADD instruction.. + * + * Negation of the full source is done with NV30_FP_REG_NEGATE, arbitrary + * negation requires multiplication with a const. + * + * Arbitrary swizzling is supported with the exception of SWIZZLE_ZERO/SWIZZLE_ONE + * The temp/result regs appear to be initialised to (0.0, 0.0, 0.0, 0.0) as SWIZZLE_ZERO + * is implemented simply by not writing to the relevant components of the destination. + * + * Conditional execution + * TODO + * + * Non-native instructions: + * LIT + * LRP - MAD+MAD + * SUB - ADD, negate second source + * RSQ - LG2 + EX2 + * POW - LG2 + MUL + EX2 + * SCS - COS + SIN + * XPD + */ + +//== Opcode / Destination selection == +#define NV30_FP_OP_PROGRAM_END (1 << 0) +#define NV30_FP_OP_OUT_REG_SHIFT 1 +#define NV30_FP_OP_OUT_REG_MASK (31 << 1) /* uncertain */ +/* Needs to be set when writing outputs to get expected result.. */ +#define NV30_FP_OP_OUT_REG_HALF (1 << 7) +#define NV30_FP_OP_COND_WRITE_ENABLE (1 << 8) +#define NV30_FP_OP_OUTMASK_SHIFT 9 +#define NV30_FP_OP_OUTMASK_MASK (0xF << 9) +# define NV30_FP_OP_OUT_X (1<<9) +# define NV30_FP_OP_OUT_Y (1<<10) +# define NV30_FP_OP_OUT_Z (1<<11) +# define NV30_FP_OP_OUT_W (1<<12) +/* Uncertain about these, especially the input_src values.. it's possible that + * they can be dynamically changed. + */ +#define NV30_FP_OP_INPUT_SRC_SHIFT 13 +#define NV30_FP_OP_INPUT_SRC_MASK (15 << 13) +# define NV30_FP_OP_INPUT_SRC_POSITION 0x0 +# define NV30_FP_OP_INPUT_SRC_COL0 0x1 +# define NV30_FP_OP_INPUT_SRC_COL1 0x2 +# define NV30_FP_OP_INPUT_SRC_FOGC 0x3 +# define NV30_FP_OP_INPUT_SRC_TC0 0x4 +# define NV30_FP_OP_INPUT_SRC_TC(n) (0x4 + n) +#define NV30_FP_OP_TEX_UNIT_SHIFT 17 +#define NV30_FP_OP_TEX_UNIT_MASK (0xF << 17) /* guess */ +#define NV30_FP_OP_PRECISION_SHIFT 22 +#define NV30_FP_OP_PRECISION_MASK (3 << 22) +# define NV30_FP_PRECISION_FP32 0 +# define NV30_FP_PRECISION_FP16 1 +# define NV30_FP_PRECISION_FX12 2 +#define NV30_FP_OP_OPCODE_SHIFT 24 +#define NV30_FP_OP_OPCODE_MASK (0x3F << 24) +# define NV30_FP_OP_OPCODE_NOP 0x00 +# define NV30_FP_OP_OPCODE_MOV 0x01 +# define NV30_FP_OP_OPCODE_MUL 0x02 +# define NV30_FP_OP_OPCODE_ADD 0x03 +# define NV30_FP_OP_OPCODE_MAD 0x04 +# define NV30_FP_OP_OPCODE_DP3 0x05 +# define NV30_FP_OP_OPCODE_DP4 0x06 +# define NV30_FP_OP_OPCODE_DST 0x07 +# define NV30_FP_OP_OPCODE_MIN 0x08 +# define NV30_FP_OP_OPCODE_MAX 0x09 +# define NV30_FP_OP_OPCODE_SLT 0x0A +# define NV30_FP_OP_OPCODE_SGE 0x0B +# define NV30_FP_OP_OPCODE_SLE 0x0C +# define NV30_FP_OP_OPCODE_SGT 0x0D +# define NV30_FP_OP_OPCODE_SNE 0x0E +# define NV30_FP_OP_OPCODE_SEQ 0x0F +# define NV30_FP_OP_OPCODE_FRC 0x10 +# define NV30_FP_OP_OPCODE_FLR 0x11 +# define NV30_FP_OP_OPCODE_KIL 0x12 +# define NV30_FP_OP_OPCODE_PK4B 0x13 +# define NV30_FP_OP_OPCODE_UP4B 0x14 +# define NV30_FP_OP_OPCODE_DDX 0x15 /* can only write XY */ +# define NV30_FP_OP_OPCODE_DDY 0x16 /* can only write XY */ +# define NV30_FP_OP_OPCODE_TEX 0x17 +# define NV30_FP_OP_OPCODE_TXP 0x18 +# define NV30_FP_OP_OPCODE_TXD 0x19 +# define NV30_FP_OP_OPCODE_RCP 0x1A +# define NV30_FP_OP_OPCODE_RSQ 0x1B +# define NV30_FP_OP_OPCODE_EX2 0x1C +# define NV30_FP_OP_OPCODE_LG2 0x1D +# define NV30_FP_OP_OPCODE_LIT 0x1E +# define NV30_FP_OP_OPCODE_LRP 0x1F +# define NV30_FP_OP_OPCODE_STR 0x20 +# define NV30_FP_OP_OPCODE_SFL 0x21 +# define NV30_FP_OP_OPCODE_COS 0x22 +# define NV30_FP_OP_OPCODE_SIN 0x23 +# define NV30_FP_OP_OPCODE_PK2H 0x24 +# define NV30_FP_OP_OPCODE_UP2H 0x25 +# define NV30_FP_OP_OPCODE_POW 0x26 +# define NV30_FP_OP_OPCODE_PK4UB 0x27 +# define NV30_FP_OP_OPCODE_UP4UB 0x28 +# define NV30_FP_OP_OPCODE_PK2US 0x29 +# define NV30_FP_OP_OPCODE_UP2US 0x2A +# define NV30_FP_OP_OPCODE_DP2A 0x2E +# define NV30_FP_OP_OPCODE_TXB 0x31 +# define NV30_FP_OP_OPCODE_RFL 0x36 +# define NV30_FP_OP_OPCODE_DIV 0x3A +#define NV30_FP_OP_OUT_SAT (1 << 31) + +/* high order bits of SRC0 */ +#define NV30_FP_OP_OUT_ABS (1 << 29) +#define NV30_FP_OP_COND_SWZ_W_SHIFT 27 +#define NV30_FP_OP_COND_SWZ_W_MASK (3 << 27) +#define NV30_FP_OP_COND_SWZ_Z_SHIFT 25 +#define NV30_FP_OP_COND_SWZ_Z_MASK (3 << 25) +#define NV30_FP_OP_COND_SWZ_Y_SHIFT 23 +#define NV30_FP_OP_COND_SWZ_Y_MASK (3 << 23) +#define NV30_FP_OP_COND_SWZ_X_SHIFT 21 +#define NV30_FP_OP_COND_SWZ_X_MASK (3 << 21) +#define NV30_FP_OP_COND_SWZ_ALL_SHIFT 21 +#define NV30_FP_OP_COND_SWZ_ALL_MASK (0xFF << 21) +#define NV30_FP_OP_COND_SHIFT 18 +#define NV30_FP_OP_COND_MASK (0x07 << 18) +# define NV30_FP_OP_COND_FL 0 +# define NV30_FP_OP_COND_LT 1 +# define NV30_FP_OP_COND_EQ 2 +# define NV30_FP_OP_COND_LE 3 +# define NV30_FP_OP_COND_GT 4 +# define NV30_FP_OP_COND_NE 5 +# define NV30_FP_OP_COND_GE 6 +# define NV30_FP_OP_COND_TR 7 + +/* high order bits of SRC1 */ +#define NV30_FP_OP_DST_SCALE_SHIFT 28 +#define NV30_FP_OP_DST_SCALE_MASK (3 << 28) +#define NV30_FP_OP_DST_SCALE_1X 0 +#define NV30_FP_OP_DST_SCALE_2X 1 +#define NV30_FP_OP_DST_SCALE_4X 2 +#define NV30_FP_OP_DST_SCALE_8X 3 +#define NV30_FP_OP_DST_SCALE_INV_2X 5 +#define NV30_FP_OP_DST_SCALE_INV_4X 6 +#define NV30_FP_OP_DST_SCALE_INV_8X 7 + + +/* high order bits of SRC2 */ +#define NV30_FP_OP_INDEX_INPUT (1 << 30) + +//== Register selection == +#define NV30_FP_REG_TYPE_SHIFT 0 +#define NV30_FP_REG_TYPE_MASK (3 << 0) +# define NV30_FP_REG_TYPE_TEMP 0 +# define NV30_FP_REG_TYPE_INPUT 1 +# define NV30_FP_REG_TYPE_CONST 2 +#define NV30_FP_REG_SRC_SHIFT 2 /* uncertain */ +#define NV30_FP_REG_SRC_MASK (31 << 2) +#define NV30_FP_REG_SRC_HALF (1 << 8) +#define NV30_FP_REG_SWZ_ALL_SHIFT 9 +#define NV30_FP_REG_SWZ_ALL_MASK (255 << 9) +#define NV30_FP_REG_SWZ_X_SHIFT 9 +#define NV30_FP_REG_SWZ_X_MASK (3 << 9) +#define NV30_FP_REG_SWZ_Y_SHIFT 11 +#define NV30_FP_REG_SWZ_Y_MASK (3 << 11) +#define NV30_FP_REG_SWZ_Z_SHIFT 13 +#define NV30_FP_REG_SWZ_Z_MASK (3 << 13) +#define NV30_FP_REG_SWZ_W_SHIFT 15 +#define NV30_FP_REG_SWZ_W_MASK (3 << 15) +# define NV30_FP_SWIZZLE_X 0 +# define NV30_FP_SWIZZLE_Y 1 +# define NV30_FP_SWIZZLE_Z 2 +# define NV30_FP_SWIZZLE_W 3 +#define NV30_FP_REG_NEGATE (1 << 17) + +#define NV30SR_NONE 0 +#define NV30SR_OUTPUT 1 +#define NV30SR_INPUT 2 +#define NV30SR_TEMP 3 +#define NV30SR_CONST 4 + +struct nv30_sreg { + int type; + int index; + + int dst_scale; + + int negate; + int abs; + int swz[4]; + + int cc_update; + int cc_update_reg; + int cc_test; + int cc_test_reg; + int cc_swz[4]; +}; + +static INLINE struct nv30_sreg +nv30_sr(int type, int index) +{ + struct nv30_sreg temp = { + .type = type, + .index = index, + .dst_scale = DEF_SCALE, + .abs = 0, + .negate = 0, + .swz = { 0, 1, 2, 3 }, + .cc_update = 0, + .cc_update_reg = 0, + .cc_test = DEF_CTEST, + .cc_test_reg = 0, + .cc_swz = { 0, 1, 2, 3 }, + }; + return temp; +} + +static INLINE struct nv30_sreg +nv30_sr_swz(struct nv30_sreg src, int x, int y, int z, int w) +{ + struct nv30_sreg dst = src; + + dst.swz[SWZ_X] = src.swz[x]; + dst.swz[SWZ_Y] = src.swz[y]; + dst.swz[SWZ_Z] = src.swz[z]; + dst.swz[SWZ_W] = src.swz[w]; + return dst; +} + +static INLINE struct nv30_sreg +nv30_sr_neg(struct nv30_sreg src) +{ + src.negate = !src.negate; + return src; +} + +static INLINE struct nv30_sreg +nv30_sr_abs(struct nv30_sreg src) +{ + src.abs = 1; + return src; +} + +static INLINE struct nv30_sreg +nv30_sr_scale(struct nv30_sreg src, int scale) +{ + src.dst_scale = scale; + return src; +} + +#endif |