diff options
Diffstat (limited to 'src/glu/sgi/libnurbs/internals/subdivider.cc')
| -rw-r--r-- | src/glu/sgi/libnurbs/internals/subdivider.cc | 912 |
1 files changed, 912 insertions, 0 deletions
diff --git a/src/glu/sgi/libnurbs/internals/subdivider.cc b/src/glu/sgi/libnurbs/internals/subdivider.cc new file mode 100644 index 0000000000..e85acacf8b --- /dev/null +++ b/src/glu/sgi/libnurbs/internals/subdivider.cc @@ -0,0 +1,912 @@ +/* +** License Applicability. Except to the extent portions of this file are +** made subject to an alternative license as permitted in the SGI Free +** Software License B, Version 1.1 (the "License"), the contents of this +** file are subject only to the provisions of the License. You may not use +** this file except in compliance with the License. You may obtain a copy +** of the License at Silicon Graphics, Inc., attn: Legal Services, 1600 +** Amphitheatre Parkway, Mountain View, CA 94043-1351, or at: +** +** http://oss.sgi.com/projects/FreeB +** +** Note that, as provided in the License, the Software is distributed on an +** "AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS +** DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND +** CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A +** PARTICULAR PURPOSE, AND NON-INFRINGEMENT. +** +** Original Code. The Original Code is: OpenGL Sample Implementation, +** Version 1.2.1, released January 26, 2000, developed by Silicon Graphics, +** Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc. +** Copyright in any portions created by third parties is as indicated +** elsewhere herein. All Rights Reserved. +** +** Additional Notice Provisions: The application programming interfaces +** established by SGI in conjunction with the Original Code are The +** OpenGL(R) Graphics System: A Specification (Version 1.2.1), released +** April 1, 1999; The OpenGL(R) Graphics System Utility Library (Version +** 1.3), released November 4, 1998; and OpenGL(R) Graphics with the X +** Window System(R) (Version 1.3), released October 19, 1998. This software +** was created using the OpenGL(R) version 1.2.1 Sample Implementation +** published by SGI, but has not been independently verified as being +** compliant with the OpenGL(R) version 1.2.1 Specification. +*/ + +/* + * subdivider.cxx + * + * $Date: 2001/03/17 00:25:41 $ $Revision: 1.1 $ + * $Header: /home/krh/git/sync/mesa-cvs-repo/Mesa/src/glu/sgi/libnurbs/internals/subdivider.cc,v 1.1 2001/03/17 00:25:41 brianp Exp $ + */ + +#include "glimports.h" +#include "myassert.h" +#include "mystdio.h" +#include "subdivider.h" +#include "arc.h" +#include "bezierarc.h" +#include "bin.h" +#include "renderhints.h" +#include "backend.h" +#include "mapdesc.h" +#include "quilt.h" +#include "patchlist.h" +#include "patch.h" +#include "nurbsconsts.h" +#include "trimvertpool.h" +#include "simplemath.h" + +#include "polyUtil.h" //for function area() + +//#define PARTITION_TEST +#ifdef PARTITION_TEST +#include "partitionY.h" +#include "monoTriangulation.h" +#include "dataTransform.h" +#include "monoChain.h" + +#endif + + +#define OPTIMIZE_UNTRIMED_CASE + + +Bin* +Subdivider::makePatchBoundary( const REAL *from, const REAL *to ) +{ + Bin* ret = new Bin(); + REAL smin = from[0]; + REAL smax = to[0]; + REAL tmin = from[1]; + REAL tmax = to[1]; + + pjarc = 0; + + Arc_ptr jarc = new(arcpool) Arc( arc_bottom, 0 ); + arctessellator.bezier( jarc, smin, smax, tmin, tmin ); + ret->addarc( jarc ); + pjarc = jarc->append( pjarc ); + + jarc = new(arcpool) Arc( arc_right, 0 ); + arctessellator.bezier( jarc, smax, smax, tmin, tmax ); + ret->addarc( jarc ); + pjarc = jarc->append( pjarc ); + + jarc = new(arcpool) Arc( arc_top, 0 ); + arctessellator.bezier( jarc, smax, smin, tmax, tmax ); + ret->addarc( jarc ); + pjarc = jarc->append( pjarc ); + + jarc = new(arcpool) Arc( arc_left, 0 ); + arctessellator.bezier( jarc, smin, smin, tmax, tmin ); + ret->addarc( jarc ); + jarc->append( pjarc ); + + assert( jarc->check() != 0 ); + return ret; +} + +/*--------------------------------------------------------------------------- + * Subdivider - construct a subdivider + *--------------------------------------------------------------------------- + */ + +Subdivider::Subdivider( Renderhints& r, Backend& b ) + : arcpool( sizeof( Arc), 1, "arcpool" ), + bezierarcpool( sizeof( BezierArc ), 1, "Bezarcpool" ), + pwlarcpool( sizeof( PwlArc ), 1, "Pwlarcpool" ), + renderhints( r ), + arctessellator( trimvertexpool, pwlarcpool ), + backend( b ), + slicer( b ) +{ +} + +void +Subdivider::setJumpbuffer( JumpBuffer *j ) +{ + jumpbuffer = j; +} + +/*--------------------------------------------------------------------------- + * clear - reset all state after possible error condition + *--------------------------------------------------------------------------- + */ + +void +Subdivider::clear( void ) +{ + trimvertexpool.clear(); + arcpool.clear(); + pwlarcpool.clear(); + bezierarcpool.clear(); +} + +/*--------------------------------------------------------------------------- + * ~Subdivider - destroy a subdivider + *--------------------------------------------------------------------------- + */ + +Subdivider::~Subdivider( void ) +{ +} + +/*--------------------------------------------------------------------------- + * addArc - add a bezier arc to a trim loop and to a bin + *--------------------------------------------------------------------------- + */ +void +Subdivider::addArc( REAL *cpts, Quilt *quilt, long _nuid ) +{ + BezierArc *bezierArc = new(bezierarcpool) BezierArc; + Arc *jarc = new(arcpool) Arc( arc_none, _nuid ); + jarc->pwlArc = 0; + jarc->bezierArc = bezierArc; + bezierArc->order = quilt->qspec->order; + bezierArc->stride = quilt->qspec->stride; + bezierArc->mapdesc = quilt->mapdesc; + bezierArc->cpts = cpts; + initialbin.addarc( jarc ); + pjarc = jarc->append( pjarc ); +} + +/*--------------------------------------------------------------------------- + * addArc - add a pwl arc to a trim loop and to a bin + *--------------------------------------------------------------------------- + */ + +void +Subdivider::addArc( int npts, TrimVertex *pts, long _nuid ) +{ + Arc *jarc = new(arcpool) Arc( arc_none, _nuid ); + jarc->pwlArc = new(pwlarcpool) PwlArc( npts, pts ); + initialbin.addarc( jarc ); + pjarc = jarc->append( pjarc ); +} + +void +Subdivider::beginQuilts( void ) +{ + qlist = 0; +} + +void +Subdivider::addQuilt( Quilt *quilt ) +{ + quilt->next = qlist; + qlist = quilt; +} + +/*--------------------------------------------------------------------------- + * drawSurfaces - main entry point for surface tessellation + *--------------------------------------------------------------------------- + */ + +void +Subdivider::drawSurfaces( long nuid ) +{ + renderhints.init( ); + + if (qlist == NULL) + { + //initialbin could be nonempty due to some errors + freejarcs(initialbin); + return; + } + + for( Quilt *q = qlist; q; q = q->next ) { + if( q->isCulled( ) == CULL_TRIVIAL_REJECT ) { + freejarcs( initialbin ); + return; + } + } + + + REAL from[2], to[2]; + qlist->getRange( from, to, spbrkpts, tpbrkpts ); +#ifdef OPTIMIZE_UNTRIMED_CASE + //perform optimization only when the samplng method is + //DOMAIN_DISTANCE and the display methdo is either + //fill or outline_polygon. + int optimize = (is_domain_distance_sampling && (renderhints.display_method != N_OUTLINE_PATCH)); +#endif + + if( ! initialbin.isnonempty() ) { +#ifdef OPTIMIZE_UNTRIMED_CASE + if(! optimize ) + { + + makeBorderTrim( from, to ); + } +#else + makeBorderTrim( from, to ); +#endif + } else { + REAL rate[2]; + qlist->findRates( spbrkpts, tpbrkpts, rate ); + + if( decompose( initialbin, min(rate[0], rate[1]) ) ) + mylongjmp( jumpbuffer, 31 ); + } + + backend.bgnsurf( renderhints.wiretris, renderhints.wirequads, nuid ); + +#ifdef PARTITION_TEST + if( initialbin.isnonempty() && spbrkpts.end-2 == spbrkpts.start && + tpbrkpts.end-2 == tpbrkpts.start) +{ + for(int i=spbrkpts.start; i<spbrkpts.end-1; i++){ + for(int j=tpbrkpts.start; j<tpbrkpts.end-1; j++){ + Real pta[2], ptb[2]; + pta[0] = spbrkpts.pts[i]; + ptb[0] = spbrkpts.pts[i+1]; + pta[1] = tpbrkpts.pts[j]; + ptb[1] = tpbrkpts.pts[j+1]; + qlist->downloadAll(pta, ptb, backend); + + directedLine *poly; + + { + + poly = bin_to_DLineLoops(initialbin); + + poly=poly->deleteDegenerateLinesAllPolygons(); + + sampledLine* retSampledLines; +//printf("before MC_partition\n"); + poly = MC_partitionY(poly, &retSampledLines); +//printf("after MC_partition\n"); + + } + + + { + primStream pStream(5000,5000); + directedLine* temp; + + for(temp=poly; temp != NULL; temp=temp->getNextPolygon()) + + monoTriangulation(temp, &pStream); + + slicer.evalStream(&pStream); + + } + //need to clean up space + } + } + freejarcs( initialbin ); + backend.endsurf(); + return; + + /* + printf("num_polygons=%i\n", poly->numPolygons()); + printf("num_edges=%i\n", poly->numEdgesAllPolygons()); + poly->writeAllPolygons("zloutputFile"); + return; + { + primStream pStream(20,20); + for(directedLine* tempD = poly; tempD != NULL; tempD = tempD->getNextPolygon()) + monoTriangulation(tempD, &pStream); + } + return; + */ +} +#endif //PARTITION_TEST + + +#ifdef OPTIMIZE_UNTRIMED_CASE + if( (!initialbin.isnonempty()) && optimize ) + { + int i,j; + int num_u_steps; + int num_v_steps; + for(i=spbrkpts.start; i<spbrkpts.end-1; i++){ + for(j=tpbrkpts.start; j<tpbrkpts.end-1; j++){ + Real pta[2], ptb[2]; + pta[0] = spbrkpts.pts[i]; + ptb[0] = spbrkpts.pts[i+1]; + pta[1] = tpbrkpts.pts[j]; + ptb[1] = tpbrkpts.pts[j+1]; + qlist->downloadAll(pta, ptb, backend); + + num_u_steps = (int) (domain_distance_u_rate * (ptb[0]-pta[0])); + num_v_steps = (int) (domain_distance_v_rate * (ptb[1]-pta[1])); + + if(num_u_steps <= 0) num_u_steps = 1; + if(num_v_steps <= 0) num_v_steps = 1; + + backend.surfgrid(pta[0], ptb[0], num_u_steps, + ptb[1], pta[1], num_v_steps); + backend.surfmesh(0,0,num_u_steps,num_v_steps); + + + + continue; + /* the following is left for reference purpose, don't delete + { + Bin* tempSource; + Patchlist patchlist(qlist, pta, ptb); + patchlist.getstepsize(); + + tempSource=makePatchBoundary(pta, ptb); + + tessellation(*tempSource, patchlist); + + render(*tempSource); + delete tempSource; + } + */ + } + } + } + else + subdivideInS( initialbin ); +#else + + subdivideInS( initialbin ); +#endif + + backend.endsurf(); + +} + +void +Subdivider::subdivideInS( Bin& source ) +{ + if( renderhints.display_method == N_OUTLINE_PARAM ) { + outline( source ); + freejarcs( source ); + } else { + setArcTypeBezier(); + setNonDegenerate(); + splitInS( source, spbrkpts.start, spbrkpts.end ); + } +} + + +/*--------------------------------------------------------------------------- + * splitInS - split a patch and a bin by an isoparametric line + *--------------------------------------------------------------------------- + */ + +void +Subdivider::splitInS( Bin& source, int start, int end ) +{ + if( source.isnonempty() ) { + if( start != end ) { + int i = start + (end - start) / 2; + Bin left, right; + split( source, left, right, 0, spbrkpts.pts[i] ); + splitInS( left, start, i ); + splitInS( right, i+1, end ); + } else { + if( start == spbrkpts.start || start == spbrkpts.end ) { + freejarcs( source ); + } else if( renderhints.display_method == N_OUTLINE_PARAM_S ) { + outline( source ); + freejarcs( source ); + } else { + setArcTypeBezier(); + setNonDegenerate(); + s_index = start; + splitInT( source, tpbrkpts.start, tpbrkpts.end ); + } + } + } +} + +/*--------------------------------------------------------------------------- + * splitInT - split a patch and a bin by an isoparametric line + *--------------------------------------------------------------------------- + */ + +void +Subdivider::splitInT( Bin& source, int start, int end ) +{ + if( source.isnonempty() ) { + if( start != end ) { + int i = start + (end - start) / 2; + Bin left, right; + split( source, left, right, 1, tpbrkpts.pts[i] ); + splitInT( left, start, i ); + splitInT( right, i+1, end ); + } else { + if( start == tpbrkpts.start || start == tpbrkpts.end ) { + freejarcs( source ); + } else if( renderhints.display_method == N_OUTLINE_PARAM_ST ) { + outline( source ); + freejarcs( source ); + } else { + t_index = start; + setArcTypeBezier(); + setDegenerate(); + + REAL pta[2], ptb[2]; + pta[0] = spbrkpts.pts[s_index-1]; + pta[1] = tpbrkpts.pts[t_index-1]; + + ptb[0] = spbrkpts.pts[s_index]; + ptb[1] = tpbrkpts.pts[t_index]; + qlist->downloadAll( pta, ptb, backend ); + + Patchlist patchlist( qlist, pta, ptb ); +/* +printf("-------samplingSplit-----\n"); +source.show("samplingSplit source"); +*/ + samplingSplit( source, patchlist, renderhints.maxsubdivisions, 0 ); + setNonDegenerate(); + setArcTypeBezier(); + } + } + } +} + +/*-------------------------------------------------------------------------- + * samplingSplit - recursively subdivide patch, cull check each subpatch + *-------------------------------------------------------------------------- + */ + +void +Subdivider::samplingSplit( + Bin& source, + Patchlist& patchlist, + int subdivisions, + int param ) +{ + if( ! source.isnonempty() ) return; + + if( patchlist.cullCheck() == CULL_TRIVIAL_REJECT ) { + freejarcs( source ); + return; + } + + patchlist.getstepsize(); + + if( renderhints.display_method == N_OUTLINE_PATCH ) { + tessellation( source, patchlist ); + outline( source ); + freejarcs( source ); + return; + } + + //patchlist.clamp(); + + tessellation( source, patchlist ); + + if( patchlist.needsSamplingSubdivision() && (subdivisions > 0) ) { + if( ! patchlist.needsSubdivision( 0 ) ) + param = 1; + else if( ! patchlist.needsSubdivision( 1 ) ) + param = 0; + else + param = 1 - param; + + Bin left, right; + REAL mid = ( patchlist.pspec[param].range[0] + + patchlist.pspec[param].range[1] ) * 0.5; + split( source, left, right, param, mid ); + Patchlist subpatchlist( patchlist, param, mid ); + samplingSplit( left, subpatchlist, subdivisions-1, param ); + samplingSplit( right, patchlist, subdivisions-1, param ); + } else { + setArcTypePwl(); + setDegenerate(); + nonSamplingSplit( source, patchlist, subdivisions, param ); + setDegenerate(); + setArcTypeBezier(); + } +} + +void +Subdivider::nonSamplingSplit( + Bin& source, + Patchlist& patchlist, + int subdivisions, + int param ) +{ + if( patchlist.needsNonSamplingSubdivision() && (subdivisions > 0) ) { + param = 1 - param; + + Bin left, right; + REAL mid = ( patchlist.pspec[param].range[0] + + patchlist.pspec[param].range[1] ) * 0.5; + split( source, left, right, param, mid ); + Patchlist subpatchlist( patchlist, param, mid ); + if( left.isnonempty() ) + if( subpatchlist.cullCheck() == CULL_TRIVIAL_REJECT ) + freejarcs( left ); + else + nonSamplingSplit( left, subpatchlist, subdivisions-1, param ); + if( right.isnonempty() ) + if( patchlist.cullCheck() == CULL_TRIVIAL_REJECT ) + freejarcs( right ); + else + nonSamplingSplit( right, patchlist, subdivisions-1, param ); + + } else { + // make bbox calls + patchlist.bbox(); + backend.patch( patchlist.pspec[0].range[0], patchlist.pspec[0].range[1], + patchlist.pspec[1].range[0], patchlist.pspec[1].range[1] ); + + if( renderhints.display_method == N_OUTLINE_SUBDIV ) { + outline( source ); + freejarcs( source ); + } else { + setArcTypePwl(); + setDegenerate(); + findIrregularS( source ); + monosplitInS( source, smbrkpts.start, smbrkpts.end ); + } + } +} + +/*-------------------------------------------------------------------------- + * tessellation - set tessellation of interior and boundary of patch + *-------------------------------------------------------------------------- + */ + +void +Subdivider::tessellation( Bin& bin, Patchlist &patchlist ) +{ + // tessellate unsampled trim curves + tessellate( bin, patchlist.pspec[1].sidestep[1], patchlist.pspec[0].sidestep[1], + patchlist.pspec[1].sidestep[0], patchlist.pspec[0].sidestep[0] ); + + // set interior sampling rates + slicer.setstriptessellation( patchlist.pspec[0].stepsize, patchlist.pspec[1].stepsize ); + + //added by zl: set the order which will be used in slicer.c++ + slicer.set_ulinear( (patchlist.get_uorder() == 2)); + slicer.set_vlinear( (patchlist.get_vorder() == 2)); + + // set boundary sampling rates + stepsizes[0] = patchlist.pspec[1].stepsize; + stepsizes[1] = patchlist.pspec[0].stepsize; + stepsizes[2] = patchlist.pspec[1].stepsize; + stepsizes[3] = patchlist.pspec[0].stepsize; +} + +/*--------------------------------------------------------------------------- + * monosplitInS - split a patch and a bin by an isoparametric line + *--------------------------------------------------------------------------- + */ + +void +Subdivider::monosplitInS( Bin& source, int start, int end ) +{ + if( source.isnonempty() ) { + if( start != end ) { + int i = start + (end - start) / 2; + Bin left, right; + split( source, left, right, 0, smbrkpts.pts[i] ); + monosplitInS( left, start, i ); + monosplitInS( right, i+1, end ); + } else { + if( renderhints.display_method == N_OUTLINE_SUBDIV_S ) { + outline( source ); + freejarcs( source ); + } else { + setArcTypePwl(); + setDegenerate(); + findIrregularT( source ); + monosplitInT( source, tmbrkpts.start, tmbrkpts.end ); + } + } + } +} + +/*--------------------------------------------------------------------------- + * monosplitInT - split a patch and a bin by an isoparametric line + *--------------------------------------------------------------------------- + */ + +void +Subdivider::monosplitInT( Bin& source, int start, int end ) +{ + if( source.isnonempty() ) { + if( start != end ) { + int i = start + (end - start) / 2; + Bin left, right; + split( source, left, right, 1, tmbrkpts.pts[i] ); + monosplitInT( left, start, i ); + monosplitInT( right, i+1, end ); + } else { + if( renderhints.display_method == N_OUTLINE_SUBDIV_ST ) { + outline( source ); + freejarcs( source ); + } else { +/* +printf("*******render\n"); +source.show("source\n"); +*/ + render( source ); + freejarcs( source ); + } + } + } +} + + +/*---------------------------------------------------------------------------- + * findIrregularS - determine points of non-monotonicity is s direction + *---------------------------------------------------------------------------- + */ + +void +Subdivider::findIrregularS( Bin& bin ) +{ + assert( bin.firstarc()->check() != 0 ); + + smbrkpts.grow( bin.numarcs() ); + + for( Arc_ptr jarc=bin.firstarc(); jarc; jarc=bin.nextarc() ) { + REAL *a = jarc->prev->tail(); + REAL *b = jarc->tail(); + REAL *c = jarc->head(); + + if( b[1] == a[1] && b[1] == c[1] ) continue; + + //corrected code + if((b[1]<=a[1] && b[1] <= c[1]) || + (b[1]>=a[1] && b[1] >= c[1])) + { + //each arc (jarc, jarc->prev, jarc->next) is a + //monotone arc consisting of multiple line segements. + //it may happen that jarc->prev and jarc->next are the same, + //that is, jarc->prev and jarc form a closed loop. + //In such case, a and c will be the same. + if(a[0]==c[0] && a[1] == c[1]) + { + if(jarc->pwlArc->npts >2) + { + c = jarc->pwlArc->pts[jarc->pwlArc->npts-2].param; + } + else + { + assert(jarc->prev->pwlArc->npts>2); + a = jarc->prev->pwlArc->pts[jarc->prev->pwlArc->npts-2].param; + } + + } + if(area(a,b,c) < 0) + { + smbrkpts.add(b[0]); + } + + } + + /* old code, + if( b[1] <= a[1] && b[1] <= c[1] ) { + if( ! ccwTurn_tr( jarc->prev, jarc ) ) + smbrkpts.add( b[0] ); + } else if( b[1] >= a[1] && b[1] >= c[1] ) { + if( ! ccwTurn_tl( jarc->prev, jarc ) ) + smbrkpts.add( b[0] ); + } + */ + + } + + smbrkpts.filter(); +} + +/*---------------------------------------------------------------------------- + * findIrregularT - determine points of non-monotonicity in t direction + * where one arc is parallel to the s axis. + *---------------------------------------------------------------------------- + */ + +void +Subdivider::findIrregularT( Bin& bin ) +{ + assert( bin.firstarc()->check() != 0 ); + + tmbrkpts.grow( bin.numarcs() ); + + for( Arc_ptr jarc=bin.firstarc(); jarc; jarc=bin.nextarc() ) { + REAL *a = jarc->prev->tail(); + REAL *b = jarc->tail(); + REAL *c = jarc->head(); + + if( b[0] == a[0] && b[0] == c[0] ) continue; + + if( b[0] <= a[0] && b[0] <= c[0] ) { + if( a[1] != b[1] && b[1] != c[1] ) continue; + if( ! ccwTurn_sr( jarc->prev, jarc ) ) + tmbrkpts.add( b[1] ); + } else if ( b[0] >= a[0] && b[0] >= c[0] ) { + if( a[1] != b[1] && b[1] != c[1] ) continue; + if( ! ccwTurn_sl( jarc->prev, jarc ) ) + tmbrkpts.add( b[1] ); + } + } + tmbrkpts.filter( ); +} + +/*----------------------------------------------------------------------------- + * makeBorderTrim - if no user input trimming data then create + * a trimming curve around the boundaries of the Quilt. The curve consists of + * four Jordan arcs, one for each side of the Quilt, connected, of course, + * head to tail. + *----------------------------------------------------------------------------- + */ + +void +Subdivider::makeBorderTrim( const REAL *from, const REAL *to ) +{ + REAL smin = from[0]; + REAL smax = to[0]; + REAL tmin = from[1]; + REAL tmax = to[1]; + + pjarc = 0; + + Arc_ptr jarc = new(arcpool) Arc( arc_bottom, 0 ); + arctessellator.bezier( jarc, smin, smax, tmin, tmin ); + initialbin.addarc( jarc ); + pjarc = jarc->append( pjarc ); + + jarc = new(arcpool) Arc( arc_right, 0 ); + arctessellator.bezier( jarc, smax, smax, tmin, tmax ); + initialbin.addarc( jarc ); + pjarc = jarc->append( pjarc ); + + jarc = new(arcpool) Arc( arc_top, 0 ); + arctessellator.bezier( jarc, smax, smin, tmax, tmax ); + initialbin.addarc( jarc ); + pjarc = jarc->append( pjarc ); + + jarc = new(arcpool) Arc( arc_left, 0 ); + arctessellator.bezier( jarc, smin, smin, tmax, tmin ); + initialbin.addarc( jarc ); + jarc->append( pjarc ); + + assert( jarc->check() != 0 ); +} + +/*---------------------------------------------------------------------------- + * render - renders all monotone regions in a bin and frees the bin + *---------------------------------------------------------------------------- + */ + +void +Subdivider::render( Bin& bin ) +{ + bin.markall(); + +#ifdef N_ISOLINE_S + slicer.setisolines( ( renderhints.display_method == N_ISOLINE_S ) ? 1 : 0 ); +#else + slicer.setisolines( 0 ); +#endif + + for( Arc_ptr jarc=bin.firstarc(); jarc; jarc=bin.nextarc() ) { + if( jarc->ismarked() ) { + assert( jarc->check( ) != 0 ); + Arc_ptr jarchead = jarc; + do { + jarc->clearmark(); + jarc = jarc->next; + } while (jarc != jarchead); + slicer.slice( jarc ); + } + } +} + +/*--------------------------------------------------------------------------- + * outline - render the trimmed patch by outlining the boundary + *--------------------------------------------------------------------------- + */ + +void +Subdivider::outline( Bin& bin ) +{ + bin.markall(); + for( Arc_ptr jarc=bin.firstarc(); jarc; jarc=bin.nextarc() ) { + if( jarc->ismarked() ) { + assert( jarc->check( ) != 0 ); + Arc_ptr jarchead = jarc; + do { + slicer.outline( jarc ); + jarc->clearmark(); + jarc = jarc->prev; + } while (jarc != jarchead); + } + } +} + +/*--------------------------------------------------------------------------- + * freejarcs - free all arcs in a bin + *--------------------------------------------------------------------------- + */ + +void +Subdivider::freejarcs( Bin& bin ) +{ + bin.adopt(); /* XXX - should not be necessary */ + + Arc_ptr jarc; + while( (jarc = bin.removearc()) != NULL ) { + if( jarc->pwlArc ) jarc->pwlArc->deleteMe( pwlarcpool ); jarc->pwlArc = 0; + if( jarc->bezierArc) jarc->bezierArc->deleteMe( bezierarcpool ); jarc->bezierArc = 0; + jarc->deleteMe( arcpool ); + } +} + +/*---------------------------------------------------------------------------- + * tessellate - tessellate all Bezier arcs in a bin + * 1) only accepts linear Bezier arcs as input + * 2) the Bezier arcs are stored in the pwlArc structure + * 3) only vertical or horizontal lines work + * -- should + * 1) represent Bezier arcs in BezierArc structure + * (this requires a multitude of changes to the code) + * 2) accept high degree Bezier arcs (hard) + * 3) map the curve onto the surface to determine tessellation + * 4) work for curves of arbitrary geometry + *---------------------------------------------------------------------------- + */ + + +void +Subdivider::tessellate( Bin& bin, REAL rrate, REAL trate, REAL lrate, REAL brate ) +{ + for( Arc_ptr jarc=bin.firstarc(); jarc; jarc=bin.nextarc() ) { + if( jarc->isbezier( ) ) { + assert( jarc->pwlArc->npts == 2 ); + TrimVertex *pts = jarc->pwlArc->pts; + REAL s1 = pts[0].param[0]; + REAL t1 = pts[0].param[1]; + REAL s2 = pts[1].param[0]; + REAL t2 = pts[1].param[1]; + + jarc->pwlArc->deleteMe( pwlarcpool ); jarc->pwlArc = 0; + + switch( jarc->getside() ) { + case arc_left: + assert( s1 == s2 ); + arctessellator.pwl_left( jarc, s1, t1, t2, lrate ); + break; + case arc_right: + assert( s1 == s2 ); + arctessellator.pwl_right( jarc, s1, t1, t2, rrate ); + break; + case arc_top: + assert( t1 == t2 ); + arctessellator.pwl_top( jarc, t1, s1, s2, trate ); + break; + case arc_bottom: + assert( t1 == t2 ); + arctessellator.pwl_bottom( jarc, t1, s1, s2, brate ); + break; + case arc_none: + (void) abort(); + break; + } + assert( ! jarc->isbezier() ); + assert( jarc->check() != 0 ); + } + } +} |