diff options
Diffstat (limited to 'src/mesa/drivers/dri/r600/r600_reg.h')
| -rw-r--r-- | src/mesa/drivers/dri/r600/r600_reg.h | 801 |
1 files changed, 0 insertions, 801 deletions
diff --git a/src/mesa/drivers/dri/r600/r600_reg.h b/src/mesa/drivers/dri/r600/r600_reg.h index bb5416e458..73ce069e4f 100644 --- a/src/mesa/drivers/dri/r600/r600_reg.h +++ b/src/mesa/drivers/dri/r600/r600_reg.h @@ -75,7 +75,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R600_VF_MAX_VTX_NUM_SHIFT 18 # define R600_GL_CLIP_SPACE_DEF (0 << 22) # define R600_DX_CLIP_SPACE_DEF (1 << 22) -# define R500_TCL_STATE_OPTIMIZATION (1 << 23) /* This register is written directly and also starts data section * in many 3d CP_PACKET3's @@ -112,7 +111,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. /* number of vertices */ # define R600_VAP_VF_CNTL__NUM_VERTICES__SHIFT 16 -#define R500_VAP_INDEX_OFFSET 0x208c #define R600_VAP_OUTPUT_VTX_FMT_0 0x2090 # define R600_VAP_OUTPUT_VTX_FMT_0__POS_PRESENT (1<<0) @@ -365,17 +363,11 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. #define R600_VAP_PVS_VECTOR_INDX_REG 0x2200 # define R600_PVS_CODE_START 0 # define R600_MAX_PVS_CODE_LINES 256 -# define R500_MAX_PVS_CODE_LINES 1024 # define R600_PVS_CONST_START 512 -# define R500_PVS_CONST_START 1024 # define R600_MAX_PVS_CONST_VECS 256 -# define R500_MAX_PVS_CONST_VECS 1024 # define R600_PVS_UCP_START 1024 -# define R500_PVS_UCP_START 1536 # define R600_POINT_VPORT_SCALE_OFFSET 1030 -# define R500_POINT_VPORT_SCALE_OFFSET 1542 # define R600_POINT_GEN_TEX_OFFSET 1031 -# define R500_POINT_GEN_TEX_OFFSET 1543 /* * These are obsolete defines form r600_context.h, but they might give some @@ -423,8 +415,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R600_CLIP_DISABLE (1 << 16) # define R600_UCP_CULL_ONLY_ENABLE (1 << 17) # define R600_BOUNDARY_EDGE_FLAG_ENABLE (1 << 18) -# define R500_COLOR2_IS_TEXTURE (1 << 20) -# define R500_COLOR3_IS_TEXTURE (1 << 21) /* These seem to be per-pixel and per-vertex X and Y clipping planes. The first * plane is per-pixel and the second plane is per-vertex. @@ -703,39 +693,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define GB_FIFO_SIZE1_SC_HIGHWATER_TEX_SHIFT 18 # define GB_FIFO_SIZE1_SC_HIGHWATER_TEX_MASK 0x00fc0000 -/* This table specifies the source location and format for up to 16 texture - * addresses (i[0]:i[15]) and four colors (c[0]:c[3]) - */ -#define R500_RS_IP_0 0x4074 -#define R500_RS_IP_1 0x4078 -#define R500_RS_IP_2 0x407C -#define R500_RS_IP_3 0x4080 -#define R500_RS_IP_4 0x4084 -#define R500_RS_IP_5 0x4088 -#define R500_RS_IP_6 0x408C -#define R500_RS_IP_7 0x4090 -#define R500_RS_IP_8 0x4094 -#define R500_RS_IP_9 0x4098 -#define R500_RS_IP_10 0x409C -#define R500_RS_IP_11 0x40A0 -#define R500_RS_IP_12 0x40A4 -#define R500_RS_IP_13 0x40A8 -#define R500_RS_IP_14 0x40AC -#define R500_RS_IP_15 0x40B0 -#define R500_RS_IP_PTR_K0 62 -#define R500_RS_IP_PTR_K1 63 -#define R500_RS_IP_TEX_PTR_S_SHIFT 0 -#define R500_RS_IP_TEX_PTR_T_SHIFT 6 -#define R500_RS_IP_TEX_PTR_R_SHIFT 12 -#define R500_RS_IP_TEX_PTR_Q_SHIFT 18 -#define R500_RS_IP_COL_PTR_SHIFT 24 -#define R500_RS_IP_COL_FMT_SHIFT 27 -# define R500_RS_COL_PTR(x) ((x) << 24) -# define R500_RS_COL_FMT(x) ((x) << 27) -/* gap */ -#define R500_RS_IP_OFFSET_DIS (0 << 31) -#define R500_RS_IP_OFFSET_EN (1 << 31) - /* gap */ /* Zero to flush caches. */ @@ -761,14 +718,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R600_TX_ENABLE_14 (1 << 14) # define R600_TX_ENABLE_15 (1 << 15) -#define R500_TX_FILTER_4 0x4110 -# define R500_TX_WEIGHT_1_SHIFT (0) -# define R500_TX_WEIGHT_0_SHIFT (11) -# define R500_TX_WEIGHT_PAIR (1<<22) -# define R500_TX_PHASE_SHIFT (23) -# define R500_TX_DIRECTION_HORIZONTAL (0<<27) -# define R500_TX_DIRECTION_VERITCAL (1<<27) - /* S Texture Coordinate of Vertex 0 for Point texture stuffing (LLC) */ #define R600_GA_POINT_S0 0x4200 @@ -802,18 +751,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R600_POINTSIZE_X_MASK 0xffff0000 # define R600_POINTSIZE_MAX (R600_POINTSIZE_Y_MASK / 6) -/* Blue fill color */ -#define R500_GA_FILL_R 0x4220 - -/* Blue fill color */ -#define R500_GA_FILL_G 0x4224 - -/* Blue fill color */ -#define R500_GA_FILL_B 0x4228 - -/* Alpha fill color */ -#define R500_GA_FILL_A 0x422c - /* Specifies maximum and minimum point & sprite sizes for per vertex size * specification. The lower part (15:0) is MIN and (31:16) is max. @@ -840,8 +777,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R600_GA_LINE_CNTL_END_TYPE_VER (1 << 16) # define R600_GA_LINE_CNTL_END_TYPE_SQR (2 << 16) /* horizontal or vertical depending upon slope */ # define R600_GA_LINE_CNTL_END_TYPE_COMP (3 << 16) /* Computed (perpendicular to slope) */ -# define R500_GA_LINE_CNTL_SORT_NO (0 << 18) -# define R500_GA_LINE_CNTL_SORT_MINX_MINY (1 << 18) /** TODO: looks wrong */ # define R600_LINESIZE_MAX (R600_GA_LINE_CNTL_WIDTH_MASK / 6) /** TODO: looks wrong */ @@ -857,108 +792,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R600_GA_LINE_STIPPLE_CONFIG_STIPPLE_SCALE_SHIFT 2 # define R600_GA_LINE_STIPPLE_CONFIG_STIPPLE_SCALE_MASK 0xfffffffc -/* Used to load US instructions and constants */ -#define R500_GA_US_VECTOR_INDEX 0x4250 -# define R500_GA_US_VECTOR_INDEX_SHIFT 0 -# define R500_GA_US_VECTOR_INDEX_MASK 0x000000ff -# define R500_GA_US_VECTOR_INDEX_TYPE_INSTR (0 << 16) -# define R500_GA_US_VECTOR_INDEX_TYPE_CONST (1 << 16) -# define R500_GA_US_VECTOR_INDEX_CLAMP_NO (0 << 17) -# define R500_GA_US_VECTOR_INDEX_CLAMP_CONST (1 << 17) - -/* Data register for loading US instructions and constants */ -#define R500_GA_US_VECTOR_DATA 0x4254 - -/* Specifies color properties and mappings of textures. */ -#define R500_GA_COLOR_CONTROL_PS3 0x4258 -# define R500_TEX0_SHADING_PS3_SOLID (0 << 0) -# define R500_TEX0_SHADING_PS3_FLAT (1 << 0) -# define R500_TEX0_SHADING_PS3_GOURAUD (2 << 0) -# define R500_TEX1_SHADING_PS3_SOLID (0 << 2) -# define R500_TEX1_SHADING_PS3_FLAT (1 << 2) -# define R500_TEX1_SHADING_PS3_GOURAUD (2 << 2) -# define R500_TEX2_SHADING_PS3_SOLID (0 << 4) -# define R500_TEX2_SHADING_PS3_FLAT (1 << 4) -# define R500_TEX2_SHADING_PS3_GOURAUD (2 << 4) -# define R500_TEX3_SHADING_PS3_SOLID (0 << 6) -# define R500_TEX3_SHADING_PS3_FLAT (1 << 6) -# define R500_TEX3_SHADING_PS3_GOURAUD (2 << 6) -# define R500_TEX4_SHADING_PS3_SOLID (0 << 8) -# define R500_TEX4_SHADING_PS3_FLAT (1 << 8) -# define R500_TEX4_SHADING_PS3_GOURAUD (2 << 8) -# define R500_TEX5_SHADING_PS3_SOLID (0 << 10) -# define R500_TEX5_SHADING_PS3_FLAT (1 << 10) -# define R500_TEX5_SHADING_PS3_GOURAUD (2 << 10) -# define R500_TEX6_SHADING_PS3_SOLID (0 << 12) -# define R500_TEX6_SHADING_PS3_FLAT (1 << 12) -# define R500_TEX6_SHADING_PS3_GOURAUD (2 << 12) -# define R500_TEX7_SHADING_PS3_SOLID (0 << 14) -# define R500_TEX7_SHADING_PS3_FLAT (1 << 14) -# define R500_TEX7_SHADING_PS3_GOURAUD (2 << 14) -# define R500_TEX8_SHADING_PS3_SOLID (0 << 16) -# define R500_TEX8_SHADING_PS3_FLAT (1 << 16) -# define R500_TEX8_SHADING_PS3_GOURAUD (2 << 16) -# define R500_TEX9_SHADING_PS3_SOLID (0 << 18) -# define R500_TEX9_SHADING_PS3_FLAT (1 << 18) -# define R500_TEX9_SHADING_PS3_GOURAUD (2 << 18) -# define R500_TEX10_SHADING_PS3_SOLID (0 << 20) -# define R500_TEX10_SHADING_PS3_FLAT (1 << 20) -# define R500_TEX10_SHADING_PS3_GOURAUD (2 << 20) -# define R500_COLOR0_TEX_OVERRIDE_NO (0 << 22) -# define R500_COLOR0_TEX_OVERRIDE_TEX_0 (1 << 22) -# define R500_COLOR0_TEX_OVERRIDE_TEX_1 (2 << 22) -# define R500_COLOR0_TEX_OVERRIDE_TEX_2 (3 << 22) -# define R500_COLOR0_TEX_OVERRIDE_TEX_3 (4 << 22) -# define R500_COLOR0_TEX_OVERRIDE_TEX_4 (5 << 22) -# define R500_COLOR0_TEX_OVERRIDE_TEX_5 (6 << 22) -# define R500_COLOR0_TEX_OVERRIDE_TEX_6 (7 << 22) -# define R500_COLOR0_TEX_OVERRIDE_TEX_7 (8 << 22) -# define R500_COLOR0_TEX_OVERRIDE_TEX_8_C2 (9 << 22) -# define R500_COLOR0_TEX_OVERRIDE_TEX_9_C3 (10 << 22) -# define R500_COLOR1_TEX_OVERRIDE_NO (0 << 26) -# define R500_COLOR1_TEX_OVERRIDE_TEX_0 (1 << 26) -# define R500_COLOR1_TEX_OVERRIDE_TEX_1 (2 << 26) -# define R500_COLOR1_TEX_OVERRIDE_TEX_2 (3 << 26) -# define R500_COLOR1_TEX_OVERRIDE_TEX_3 (4 << 26) -# define R500_COLOR1_TEX_OVERRIDE_TEX_4 (5 << 26) -# define R500_COLOR1_TEX_OVERRIDE_TEX_5 (6 << 26) -# define R500_COLOR1_TEX_OVERRIDE_TEX_6 (7 << 26) -# define R500_COLOR1_TEX_OVERRIDE_TEX_7 (8 << 26) -# define R500_COLOR1_TEX_OVERRIDE_TEX_8_C2 (9 << 26) -# define R500_COLOR1_TEX_OVERRIDE_TEX_9_C3 (10 << 26) - -/* Returns idle status of various G3D block, captured when GA_IDLE written or - * when hard or soft reset asserted. - */ -#define R500_GA_IDLE 0x425c -# define R500_GA_IDLE_PIPE3_Z_IDLE (0 << 0) -# define R500_GA_IDLE_PIPE2_Z_IDLE (0 << 1) -# define R500_GA_IDLE_PIPE3_CD_IDLE (0 << 2) -# define R500_GA_IDLE_PIPE2_CD_IDLE (0 << 3) -# define R500_GA_IDLE_PIPE3_FG_IDLE (0 << 4) -# define R500_GA_IDLE_PIPE2_FG_IDLE (0 << 5) -# define R500_GA_IDLE_PIPE3_US_IDLE (0 << 6) -# define R500_GA_IDLE_PIPE2_US_IDLE (0 << 7) -# define R500_GA_IDLE_PIPE3_SC_IDLE (0 << 8) -# define R500_GA_IDLE_PIPE2_SC_IDLE (0 << 9) -# define R500_GA_IDLE_PIPE3_RS_IDLE (0 << 10) -# define R500_GA_IDLE_PIPE2_RS_IDLE (0 << 11) -# define R500_GA_IDLE_PIPE1_Z_IDLE (0 << 12) -# define R500_GA_IDLE_PIPE0_Z_IDLE (0 << 13) -# define R500_GA_IDLE_PIPE1_CD_IDLE (0 << 14) -# define R500_GA_IDLE_PIPE0_CD_IDLE (0 << 15) -# define R500_GA_IDLE_PIPE1_FG_IDLE (0 << 16) -# define R500_GA_IDLE_PIPE0_FG_IDLE (0 << 17) -# define R500_GA_IDLE_PIPE1_US_IDLE (0 << 18) -# define R500_GA_IDLE_PIPE0_US_IDLE (0 << 19) -# define R500_GA_IDLE_PIPE1_SC_IDLE (0 << 20) -# define R500_GA_IDLE_PIPE0_SC_IDLE (0 << 21) -# define R500_GA_IDLE_PIPE1_RS_IDLE (0 << 22) -# define R500_GA_IDLE_PIPE0_RS_IDLE (0 << 23) -# define R500_GA_IDLE_SU_IDLE (0 << 24) -# define R500_GA_IDLE_GA_IDLE (0 << 25) -# define R500_GA_IDLE_GA_UNIT2_IDLE (0 << 26) - /* Current value of stipple accumulator. */ #define R600_GA_LINE_STIPPLE_VALUE 0x4260 @@ -967,25 +800,12 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. /* S Texture Coordinate Value for Vertex 1 of Lines (V2 of parallelogram -- stuff textures -- i.e. AA) */ #define R600_GA_LINE_S1 0x4268 -/* GA Input fifo high water marks */ -#define R500_GA_FIFO_CNTL 0x4270 -# define R500_GA_FIFO_CNTL_VERTEX_FIFO_MASK 0x00000007 -# define R500_GA_FIFO_CNTL_VERTEX_FIFO_SHIFT 0 -# define R500_GA_FIFO_CNTL_VERTEX_INDEX_MASK 0x00000038 -# define R500_GA_FIFO_CNTL_VERTEX_INDEX_SHIFT 3 -# define R500_GA_FIFO_CNTL_VERTEX_REG_MASK 0x00003fc0 -# define R500_GA_FIFO_CNTL_VERTEX_REG_SHIFT 6 - /* GA enhance/tweaks */ #define R600_GA_ENHANCE 0x4274 # define R600_GA_ENHANCE_DEADLOCK_CNTL_NO_EFFECT (0 << 0) # define R600_GA_ENHANCE_DEADLOCK_CNTL_PREVENT_TCL (1 << 0) /* Prevents TCL interface from deadlocking on GA side. */ # define R600_GA_ENHANCE_FASTSYNC_CNTL_NO_EFFECT (0 << 1) # define R600_GA_ENHANCE_FASTSYNC_CNTL_ENABLE (1 << 1) /* Enables high-performance register/primitive switching. */ -# define R500_GA_ENHANCE_REG_READWRITE_NO_EFFECT (0 << 2) /* R520+ only */ -# define R500_GA_ENHANCE_REG_READWRITE_ENABLE (1 << 2) /* R520+ only, Enables GA support of simultaneous register reads and writes. */ -# define R500_GA_ENHANCE_REG_NOSTALL_NO_EFFECT (0 << 3) -# define R500_GA_ENHANCE_REG_NOSTALL_ENABLE (1 << 3) /* Enables GA support of no-stall reads for register read back. */ #define R600_GA_COLOR_CONTROL 0x4278 # define R600_GA_COLOR_CONTROL_RGB0_SHADING_SOLID (0 << 0) @@ -1071,8 +891,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R600_GA_ROUND_MODE_RGB_CLAMP_FP20 (1 << 4) # define R600_GA_ROUND_MODE_ALPHA_CLAMP_RGB (0 << 5) # define R600_GA_ROUND_MODE_ALPHA_CLAMP_FP20 (1 << 5) -# define R500_GA_ROUND_MODE_GEOMETRY_MASK_SHIFT 6 -# define R500_GA_ROUND_MODE_GEOMETRY_MASK_MASK 0x000003c0 /* Specifies x & y offsets for vertex data after conversion to FP. * Offsets are in S15 format (subpixels -- 1/12 or 1/16, even in 8b @@ -1195,40 +1013,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R600_RS_SEL_K0 4 # define R600_RS_SEL_K1 5 - -/* */ -#define R500_RS_INST_0 0x4320 -#define R500_RS_INST_1 0x4324 -#define R500_RS_INST_2 0x4328 -#define R500_RS_INST_3 0x432c -#define R500_RS_INST_4 0x4330 -#define R500_RS_INST_5 0x4334 -#define R500_RS_INST_6 0x4338 -#define R500_RS_INST_7 0x433c -#define R500_RS_INST_8 0x4340 -#define R500_RS_INST_9 0x4344 -#define R500_RS_INST_10 0x4348 -#define R500_RS_INST_11 0x434c -#define R500_RS_INST_12 0x4350 -#define R500_RS_INST_13 0x4354 -#define R500_RS_INST_14 0x4358 -#define R500_RS_INST_15 0x435c -#define R500_RS_INST_TEX_ID_SHIFT 0 -#define R500_RS_INST_TEX_CN_WRITE (1 << 4) -#define R500_RS_INST_TEX_ADDR_SHIFT 5 -#define R500_RS_INST_COL_ID_SHIFT 12 -#define R500_RS_INST_COL_CN_NO_WRITE (0 << 16) -#define R500_RS_INST_COL_CN_WRITE (1 << 16) -#define R500_RS_INST_COL_CN_WRITE_FBUFFER (2 << 16) -#define R500_RS_INST_COL_CN_WRITE_BACKFACE (3 << 16) -#define R500_RS_INST_COL_ADDR_SHIFT 18 -#define R500_RS_INST_TEX_ADJ (1 << 25) -#define R500_RS_INST_W_CN (1 << 26) -#define R500_RS_INST_TEX_ID(x) ((x) << R500_RS_INST_TEX_ID_SHIFT) -#define R500_RS_INST_TEX_ADDR(x) ((x) << R500_RS_INST_TEX_ADDR_SHIFT) -#define R500_RS_INST_COL_ID(x) ((x) << R500_RS_INST_COL_ID_SHIFT) -#define R500_RS_INST_COL_ADDR(x) ((x) << R500_RS_INST_COL_ADDR_SHIFT) - /* These DWORDs control how vertex data is routed into fragment program * registers, after interpolators. */ @@ -1412,9 +1196,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R600_TX_TRI_PERF_3_8 (3<<15) # define R600_ANISO_THRESHOLD_MASK (7<<17) -# define R500_MACRO_SWITCH (1<<22) -# define R500_BORDER_FIX (1<<31) - #define R600_TX_SIZE_0 0x4480 # define R600_TX_WIDTHMASK_SHIFT 0 # define R600_TX_WIDTHMASK_MASK (2047 << 0) @@ -1432,9 +1213,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. They are given meanings as R, G, B and Alpha by the swizzle specification */ # define R600_TX_FORMAT_X8 0x0 -# define R500_TX_FORMAT_X1 0x0 // bit set in format 2 # define R600_TX_FORMAT_X16 0x1 -# define R500_TX_FORMAT_X1_REV 0x0 // bit set in format 2 # define R600_TX_FORMAT_Y4X4 0x2 # define R600_TX_FORMAT_Y8X8 0x3 # define R600_TX_FORMAT_Y16X16 0x4 @@ -1521,14 +1300,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. #define R600_TX_FORMAT2_0 0x4500 /* obvious missing in gap */ # define R600_TX_PITCHMASK_SHIFT 0 # define R600_TX_PITCHMASK_MASK (2047 << 0) -# define R500_TXFORMAT_MSB (1 << 14) -# define R500_TXWIDTH_BIT11 (1 << 15) -# define R500_TXHEIGHT_BIT11 (1 << 16) -# define R500_POW2FIX2FLT (1 << 17) -# define R500_SEL_FILTER4_TC0 (0 << 18) -# define R500_SEL_FILTER4_TC1 (1 << 18) -# define R500_SEL_FILTER4_TC2 (2 << 18) -# define R500_SEL_FILTER4_TC3 (3 << 18) #define R600_TX_OFFSET_0 0x4540 #define R600_TX_OFFSET_1 0x4544 @@ -1983,9 +1754,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R600_FG_ALPHA_FUNC_DISABLE (0 << 11) # define R600_FG_ALPHA_FUNC_ENABLE (1 << 11) -# define R500_FG_ALPHA_FUNC_10BIT (0 << 12) -# define R500_FG_ALPHA_FUNC_8BIT (1 << 12) - # define R600_FG_ALPHA_FUNC_MASK_DISABLE (0 << 16) # define R600_FG_ALPHA_FUNC_MASK_ENABLE (1 << 16) # define R600_FG_ALPHA_FUNC_CFG_2_OF_4 (0 << 17) @@ -1994,24 +1762,11 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R600_FG_ALPHA_FUNC_DITH_DISABLE (0 << 20) # define R600_FG_ALPHA_FUNC_DITH_ENABLE (1 << 20) -# define R500_FG_ALPHA_FUNC_OFFSET_DISABLE (0 << 24) -# define R500_FG_ALPHA_FUNC_OFFSET_ENABLE (1 << 24) /* Not supported in R520 */ -# define R500_FG_ALPHA_FUNC_DISC_ZERO_MASK_DISABLE (0 << 25) -# define R500_FG_ALPHA_FUNC_DISC_ZERO_MASK_ENABLE (1 << 25) - -# define R500_FG_ALPHA_FUNC_FP16_DISABLE (0 << 28) -# define R500_FG_ALPHA_FUNC_FP16_ENABLE (1 << 28) - - /* Fog: Where does the depth come from? */ #define R600_FG_DEPTH_SRC 0x4bd8 # define R600_FG_DEPTH_SRC_SCAN (0 << 0) # define R600_FG_DEPTH_SRC_SHADER (1 << 0) -/* Fog: Alpha Compare Value */ -#define R500_FG_ALPHA_VALUE 0x4be0 -# define R500_FG_ALPHA_VALUE_MASK 0x0000ffff - /* gap */ /* Fragment program parameters in 7.16 floating point */ @@ -2169,12 +1924,8 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R600_COLOR_ENDIAN_WORD_SWAP (1 << 19) # define R600_COLOR_ENDIAN_DWORD_SWAP (2 << 19) # define R600_COLOR_ENDIAN_HALF_DWORD_SWAP (3 << 19) -# define R500_COLOR_FORMAT_ARGB10101010 (0 << 21) -# define R500_COLOR_FORMAT_UV1010 (1 << 21) -# define R500_COLOR_FORMAT_CI8 (2 << 21) /* 2D only */ # define R600_COLOR_FORMAT_ARGB1555 (3 << 21) # define R600_COLOR_FORMAT_RGB565 (4 << 21) -# define R500_COLOR_FORMAT_ARGB2101010 (5 << 21) # define R600_COLOR_FORMAT_ARGB8888 (6 << 21) # define R600_COLOR_FORMAT_ARGB32323232 (7 << 21) /* reserved */ @@ -2183,7 +1934,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R600_COLOR_FORMAT_VYUY (11 << 21) # define R600_COLOR_FORMAT_YVYU (12 << 21) # define R600_COLOR_FORMAT_UV88 (13 << 21) -# define R500_COLOR_FORMAT_I10 (14 << 21) # define R600_COLOR_FORMAT_ARGB4444 (15 << 21) #define R600_RB3D_COLORPITCH1 0x4E3C #define R600_RB3D_COLORPITCH2 0x4E40 @@ -2246,20 +1996,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R600_RB3D_AARESOLVE_CTL_AARESOLVE_ALPHA_SAMPLE0 (0 << 2) # define R600_RB3D_AARESOLVE_CTL_AARESOLVE_ALPHA_AVERAGE (1 << 2) - -/* Discard src pixels less than or equal to threshold. */ -#define R500_RB3D_DISCARD_SRC_PIXEL_LTE_THRESHOLD 0x4ea0 -/* Discard src pixels greater than or equal to threshold. */ -#define R500_RB3D_DISCARD_SRC_PIXEL_GTE_THRESHOLD 0x4ea4 -# define R500_RB3D_DISCARD_SRC_PIXEL_THRESHOLD_BLUE_SHIFT 0 -# define R500_RB3D_DISCARD_SRC_PIXEL_THRESHOLD_BLUE_MASK 0x000000ff -# define R500_RB3D_DISCARD_SRC_PIXEL_THRESHOLD_GREEN_SHIFT 8 -# define R500_RB3D_DISCARD_SRC_PIXEL_THRESHOLD_GREEN_MASK 0x0000ff00 -# define R500_RB3D_DISCARD_SRC_PIXEL_THRESHOLD_RED_SHIFT 16 -# define R500_RB3D_DISCARD_SRC_PIXEL_THRESHOLD_RED_MASK 0x00ff0000 -# define R500_RB3D_DISCARD_SRC_PIXEL_THRESHOLD_ALPHA_SHIFT 24 -# define R500_RB3D_DISCARD_SRC_PIXEL_THRESHOLD_ALPHA_MASK 0xff000000 - /* 3D ROP Control. Stalls the 2d/3d datapath until it is idle. */ #define R600_RB3D_ROPCNTL 0x4e18 # define R600_RB3D_ROPCNTL_ROP_ENABLE 0x00000004 @@ -2269,27 +2005,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. /* Color Compare Flip. Stalls the 2d/3d datapath until it is idle. */ #define R600_RB3D_CLRCMP_FLIPE 0x4e1c -/* Sets the fifo sizes */ -#define R500_RB3D_FIFO_SIZE 0x4ef4 -# define R500_RB3D_FIFO_SIZE_OP_FIFO_SIZE_FULL (0 << 0) -# define R500_RB3D_FIFO_SIZE_OP_FIFO_SIZE_HALF (1 << 0) -# define R500_RB3D_FIFO_SIZE_OP_FIFO_SIZE_QUATER (2 << 0) -# define R500_RB3D_FIFO_SIZE_OP_FIFO_SIZE_EIGTHS (3 << 0) - -/* Constant color used by the blender. Pipelined through the blender. */ -#define R500_RB3D_CONSTANT_COLOR_AR 0x4ef8 -# define R500_RB3D_CONSTANT_COLOR_AR_RED_MASK 0x0000ffff -# define R500_RB3D_CONSTANT_COLOR_AR_RED_SHIFT 0 -# define R500_RB3D_CONSTANT_COLOR_AR_ALPHA_MASK 0xffff0000 -# define R500_RB3D_CONSTANT_COLOR_AR_ALPHA_SHIFT 16 - -/* Constant color used by the blender. Pipelined through the blender. */ -#define R500_RB3D_CONSTANT_COLOR_GB 0x4efc -# define R500_RB3D_CONSTANT_COLOR_AR_BLUE_MASK 0x0000ffff -# define R500_RB3D_CONSTANT_COLOR_AR_BLUE_SHIFT 0 -# define R500_RB3D_CONSTANT_COLOR_AR_GREEN_MASK 0xffff0000 -# define R500_RB3D_CONSTANT_COLOR_AR_GREEN_SHIFT 16 - /* gap */ /* There seems to be no "write only" setting, so use Z-test = ALWAYS * for this. @@ -2382,33 +2097,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R600_FORCE_COMPRESSED_STENCIL_VALUE_DISABLE (0 << 6) # define R600_FORCE_COMPRESSED_STENCIL_VALUE_ENABLE (1 << 6) -# define R500_ZEQUAL_OPTIMIZE_ENABLE (0 << 7) -# define R500_ZEQUAL_OPTIMIZE_DISABLE (1 << 7) -# define R500_SEQUAL_OPTIMIZE_ENABLE (0 << 8) -# define R500_SEQUAL_OPTIMIZE_DISABLE (1 << 8) - -# define R500_BMASK_ENABLE (0 << 10) -# define R500_BMASK_DISABLE (1 << 10) -# define R500_HIZ_EQUAL_REJECT_DISABLE (0 << 11) -# define R500_HIZ_EQUAL_REJECT_ENABLE (1 << 11) -# define R500_HIZ_FP_EXP_BITS_DISABLE (0 << 12) -# define R500_HIZ_FP_EXP_BITS_1 (1 << 12) -# define R500_HIZ_FP_EXP_BITS_2 (2 << 12) -# define R500_HIZ_FP_EXP_BITS_3 (3 << 12) -# define R500_HIZ_FP_EXP_BITS_4 (4 << 12) -# define R500_HIZ_FP_EXP_BITS_5 (5 << 12) -# define R500_HIZ_FP_INVERT_LEADING_ONES (0 << 15) -# define R500_HIZ_FP_INVERT_LEADING_ZEROS (1 << 15) -# define R500_TILE_OVERWRITE_RECOMPRESSION_ENABLE (0 << 16) -# define R500_TILE_OVERWRITE_RECOMPRESSION_DISABLE (1 << 16) -# define R500_CONTIGUOUS_6XAA_SAMPLES_ENABLE (0 << 17) -# define R500_CONTIGUOUS_6XAA_SAMPLES_DISABLE (1 << 17) -# define R500_PEQ_PACKING_DISABLE (0 << 18) -# define R500_PEQ_PACKING_ENABLE (1 << 18) -# define R500_COVERED_PTR_MASKING_DISABLE (0 << 18) -# define R500_COVERED_PTR_MASKING_ENABLE (1 << 18) - - /* gap */ /* Z Buffer Address Offset. @@ -2460,23 +2148,6 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R600_DEPTHY_OFFSET_SHIFT 17 # define R600_DEPTHY_OFFSET_MASK 0x07FE0000 -/* Sets the fifo sizes */ -#define R500_ZB_FIFO_SIZE 0x4fd0 -# define R500_OP_FIFO_SIZE_FULL (0 << 0) -# define R500_OP_FIFO_SIZE_HALF (1 << 0) -# define R500_OP_FIFO_SIZE_QUATER (2 << 0) -# define R500_OP_FIFO_SIZE_EIGTHS (4 << 0) - -/* Stencil Reference Value and Mask for backfacing quads */ -/* R600_ZB_STENCILREFMASK handles front face */ -#define R500_ZB_STENCILREFMASK_BF 0x4fd4 -# define R500_STENCILREF_SHIFT 0 -# define R500_STENCILREF_MASK 0x000000ff -# define R500_STENCILMASK_SHIFT 8 -# define R500_STENCILMASK_MASK 0x0000ff00 -# define R500_STENCILWRITEMASK_SHIFT 16 -# define R500_STENCILWRITEMASK_MASK 0x00ff0000 - /** * \defgroup R3XX_R5XX_PROGRAMMABLE_VERTEX_SHADER_DESCRIPTION R3XX-R5XX PROGRAMMABLE VERTEX SHADER DESCRIPTION * @@ -2692,478 +2363,6 @@ enum { #define R600_PRIM_NUM_VERTICES_SHIFT 16 #define R600_PRIM_NUM_VERTICES_MASK 0xffff - - -/* - * The R500 unified shader (US) registers come in banks of 512 each, one - * for each instruction slot in the shader. You can't touch them directly. - * R500_US_VECTOR_INDEX() sets the base instruction to modify; successive - * writes to R500_GA_US_VECTOR_DATA autoincrement the index after the - * instruction is fully specified. - */ -#define R500_US_ALU_ALPHA_INST_0 0xa800 -# define R500_ALPHA_OP_MAD 0 -# define R500_ALPHA_OP_DP 1 -# define R500_ALPHA_OP_MIN 2 -# define R500_ALPHA_OP_MAX 3 -/* #define R500_ALPHA_OP_RESERVED 4 */ -# define R500_ALPHA_OP_CND 5 -# define R500_ALPHA_OP_CMP 6 -# define R500_ALPHA_OP_FRC 7 -# define R500_ALPHA_OP_EX2 8 -# define R500_ALPHA_OP_LN2 9 -# define R500_ALPHA_OP_RCP 10 -# define R500_ALPHA_OP_RSQ 11 -# define R500_ALPHA_OP_SIN 12 -# define R500_ALPHA_OP_COS 13 -# define R500_ALPHA_OP_MDH 14 -# define R500_ALPHA_OP_MDV 15 -# define R500_ALPHA_ADDRD(x) ((x) << 4) -# define R500_ALPHA_ADDRD_REL (1 << 11) -# define R500_ALPHA_SEL_A_SHIFT 12 -# define R500_ALPHA_SEL_A_SRC0 (0 << 12) -# define R500_ALPHA_SEL_A_SRC1 (1 << 12) -# define R500_ALPHA_SEL_A_SRC2 (2 << 12) -# define R500_ALPHA_SEL_A_SRCP (3 << 12) -# define R500_ALPHA_SWIZ_A_R (0 << 14) -# define R500_ALPHA_SWIZ_A_G (1 << 14) -# define R500_ALPHA_SWIZ_A_B (2 << 14) -# define R500_ALPHA_SWIZ_A_A (3 << 14) -# define R500_ALPHA_SWIZ_A_0 (4 << 14) -# define R500_ALPHA_SWIZ_A_HALF (5 << 14) -# define R500_ALPHA_SWIZ_A_1 (6 << 14) -/* #define R500_ALPHA_SWIZ_A_UNUSED (7 << 14) */ -# define R500_ALPHA_MOD_A_NOP (0 << 17) -# define R500_ALPHA_MOD_A_NEG (1 << 17) -# define R500_ALPHA_MOD_A_ABS (2 << 17) -# define R500_ALPHA_MOD_A_NAB (3 << 17) -# define R500_ALPHA_SEL_B_SHIFT 19 -# define R500_ALPHA_SEL_B_SRC0 (0 << 19) -# define R500_ALPHA_SEL_B_SRC1 (1 << 19) -# define R500_ALPHA_SEL_B_SRC2 (2 << 19) -# define R500_ALPHA_SEL_B_SRCP (3 << 19) -# define R500_ALPHA_SWIZ_B_R (0 << 21) -# define R500_ALPHA_SWIZ_B_G (1 << 21) -# define R500_ALPHA_SWIZ_B_B (2 << 21) -# define R500_ALPHA_SWIZ_B_A (3 << 21) -# define R500_ALPHA_SWIZ_B_0 (4 << 21) -# define R500_ALPHA_SWIZ_B_HALF (5 << 21) -# define R500_ALPHA_SWIZ_B_1 (6 << 21) -/* #define R500_ALPHA_SWIZ_B_UNUSED (7 << 21) */ -# define R500_ALPHA_MOD_B_NOP (0 << 24) -# define R500_ALPHA_MOD_B_NEG (1 << 24) -# define R500_ALPHA_MOD_B_ABS (2 << 24) -# define R500_ALPHA_MOD_B_NAB (3 << 24) -# define R500_ALPHA_OMOD_IDENTITY (0 << 26) -# define R500_ALPHA_OMOD_MUL_2 (1 << 26) -# define R500_ALPHA_OMOD_MUL_4 (2 << 26) -# define R500_ALPHA_OMOD_MUL_8 (3 << 26) -# define R500_ALPHA_OMOD_DIV_2 (4 << 26) -# define R500_ALPHA_OMOD_DIV_4 (5 << 26) -# define R500_ALPHA_OMOD_DIV_8 (6 << 26) -# define R500_ALPHA_OMOD_DISABLE (7 << 26) -# define R500_ALPHA_TARGET(x) ((x) << 29) -# define R500_ALPHA_W_OMASK (1 << 31) -#define R500_US_ALU_ALPHA_ADDR_0 0x9800 -# define R500_ALPHA_ADDR0(x) ((x) << 0) -# define R500_ALPHA_ADDR0_CONST (1 << 8) -# define R500_ALPHA_ADDR0_REL (1 << 9) -# define R500_ALPHA_ADDR1(x) ((x) << 10) -# define R500_ALPHA_ADDR1_CONST (1 << 18) -# define R500_ALPHA_ADDR1_REL (1 << 19) -# define R500_ALPHA_ADDR2(x) ((x) << 20) -# define R500_ALPHA_ADDR2_CONST (1 << 28) -# define R500_ALPHA_ADDR2_REL (1 << 29) -# define R500_ALPHA_SRCP_OP_1_MINUS_2A0 (0 << 30) -# define R500_ALPHA_SRCP_OP_A1_MINUS_A0 (1 << 30) -# define R500_ALPHA_SRCP_OP_A1_PLUS_A0 (2 << 30) -# define R500_ALPHA_SRCP_OP_1_MINUS_A0 (3 << 30) -#define R500_US_ALU_RGBA_INST_0 0xb000 -# define R500_ALU_RGBA_OP_MAD (0 << 0) -# define R500_ALU_RGBA_OP_DP3 (1 << 0) -# define R500_ALU_RGBA_OP_DP4 (2 << 0) -# define R500_ALU_RGBA_OP_D2A (3 << 0) -# define R500_ALU_RGBA_OP_MIN (4 << 0) -# define R500_ALU_RGBA_OP_MAX (5 << 0) -/* #define R500_ALU_RGBA_OP_RESERVED (6 << 0) */ -# define R500_ALU_RGBA_OP_CND (7 << 0) -# define R500_ALU_RGBA_OP_CMP (8 << 0) -# define R500_ALU_RGBA_OP_FRC (9 << 0) -# define R500_ALU_RGBA_OP_SOP (10 << 0) -# define R500_ALU_RGBA_OP_MDH (11 << 0) -# define R500_ALU_RGBA_OP_MDV (12 << 0) -# define R500_ALU_RGBA_ADDRD(x) ((x) << 4) -# define R500_ALU_RGBA_ADDRD_REL (1 << 11) -# define R500_ALU_RGBA_SEL_C_SHIFT 12 -# define R500_ALU_RGBA_SEL_C_SRC0 (0 << 12) -# define R500_ALU_RGBA_SEL_C_SRC1 (1 << 12) -# define R500_ALU_RGBA_SEL_C_SRC2 (2 << 12) -# define R500_ALU_RGBA_SEL_C_SRCP (3 << 12) -# define R500_ALU_RGBA_R_SWIZ_R (0 << 14) -# define R500_ALU_RGBA_R_SWIZ_G (1 << 14) -# define R500_ALU_RGBA_R_SWIZ_B (2 << 14) -# define R500_ALU_RGBA_R_SWIZ_A (3 << 14) -# define R500_ALU_RGBA_R_SWIZ_0 (4 << 14) -# define R500_ALU_RGBA_R_SWIZ_HALF (5 << 14) -# define R500_ALU_RGBA_R_SWIZ_1 (6 << 14) -/* #define R500_ALU_RGBA_R_SWIZ_UNUSED (7 << 14) */ -# define R500_ALU_RGBA_G_SWIZ_R (0 << 17) -# define R500_ALU_RGBA_G_SWIZ_G (1 << 17) -# define R500_ALU_RGBA_G_SWIZ_B (2 << 17) -# define R500_ALU_RGBA_G_SWIZ_A (3 << 17) -# define R500_ALU_RGBA_G_SWIZ_0 (4 << 17) -# define R500_ALU_RGBA_G_SWIZ_HALF (5 << 17) -# define R500_ALU_RGBA_G_SWIZ_1 (6 << 17) -/* #define R500_ALU_RGBA_G_SWIZ_UNUSED (7 << 17) */ -# define R500_ALU_RGBA_B_SWIZ_R (0 << 20) -# define R500_ALU_RGBA_B_SWIZ_G (1 << 20) -# define R500_ALU_RGBA_B_SWIZ_B (2 << 20) -# define R500_ALU_RGBA_B_SWIZ_A (3 << 20) -# define R500_ALU_RGBA_B_SWIZ_0 (4 << 20) -# define R500_ALU_RGBA_B_SWIZ_HALF (5 << 20) -# define R500_ALU_RGBA_B_SWIZ_1 (6 << 20) -/* #define R500_ALU_RGBA_B_SWIZ_UNUSED (7 << 20) */ -# define R500_ALU_RGBA_MOD_C_NOP (0 << 23) -# define R500_ALU_RGBA_MOD_C_NEG (1 << 23) -# define R500_ALU_RGBA_MOD_C_ABS (2 << 23) -# define R500_ALU_RGBA_MOD_C_NAB (3 << 23) -# define R500_ALU_RGBA_ALPHA_SEL_C_SHIFT 25 -# define R500_ALU_RGBA_ALPHA_SEL_C_SRC0 (0 << 25) -# define R500_ALU_RGBA_ALPHA_SEL_C_SRC1 (1 << 25) -# define R500_ALU_RGBA_ALPHA_SEL_C_SRC2 (2 << 25) -# define R500_ALU_RGBA_ALPHA_SEL_C_SRCP (3 << 25) -# define R500_ALU_RGBA_A_SWIZ_R (0 << 27) -# define R500_ALU_RGBA_A_SWIZ_G (1 << 27) -# define R500_ALU_RGBA_A_SWIZ_B (2 << 27) -# define R500_ALU_RGBA_A_SWIZ_A (3 << 27) -# define R500_ALU_RGBA_A_SWIZ_0 (4 << 27) -# define R500_ALU_RGBA_A_SWIZ_HALF (5 << 27) -# define R500_ALU_RGBA_A_SWIZ_1 (6 << 27) -/* #define R500_ALU_RGBA_A_SWIZ_UNUSED (7 << 27) */ -# define R500_ALU_RGBA_ALPHA_MOD_C_NOP (0 << 30) -# define R500_ALU_RGBA_ALPHA_MOD_C_NEG (1 << 30) -# define R500_ALU_RGBA_ALPHA_MOD_C_ABS (2 << 30) -# define R500_ALU_RGBA_ALPHA_MOD_C_NAB (3 << 30) -#define R500_US_ALU_RGB_INST_0 0xa000 -# define R500_ALU_RGB_SEL_A_SHIFT 0 -# define R500_ALU_RGB_SEL_A_SRC0 (0 << 0) -# define R500_ALU_RGB_SEL_A_SRC1 (1 << 0) -# define R500_ALU_RGB_SEL_A_SRC2 (2 << 0) -# define R500_ALU_RGB_SEL_A_SRCP (3 << 0) -# define R500_ALU_RGB_R_SWIZ_A_R (0 << 2) -# define R500_ALU_RGB_R_SWIZ_A_G (1 << 2) -# define R500_ALU_RGB_R_SWIZ_A_B (2 << 2) -# define R500_ALU_RGB_R_SWIZ_A_A (3 << 2) -# define R500_ALU_RGB_R_SWIZ_A_0 (4 << 2) -# define R500_ALU_RGB_R_SWIZ_A_HALF (5 << 2) -# define R500_ALU_RGB_R_SWIZ_A_1 (6 << 2) -/* #define R500_ALU_RGB_R_SWIZ_A_UNUSED (7 << 2) */ -# define R500_ALU_RGB_G_SWIZ_A_R (0 << 5) -# define R500_ALU_RGB_G_SWIZ_A_G (1 << 5) -# define R500_ALU_RGB_G_SWIZ_A_B (2 << 5) -# define R500_ALU_RGB_G_SWIZ_A_A (3 << 5) -# define R500_ALU_RGB_G_SWIZ_A_0 (4 << 5) -# define R500_ALU_RGB_G_SWIZ_A_HALF (5 << 5) -# define R500_ALU_RGB_G_SWIZ_A_1 (6 << 5) -/* #define R500_ALU_RGB_G_SWIZ_A_UNUSED (7 << 5) */ -# define R500_ALU_RGB_B_SWIZ_A_R (0 << 8) -# define R500_ALU_RGB_B_SWIZ_A_G (1 << 8) -# define R500_ALU_RGB_B_SWIZ_A_B (2 << 8) -# define R500_ALU_RGB_B_SWIZ_A_A (3 << 8) -# define R500_ALU_RGB_B_SWIZ_A_0 (4 << 8) -# define R500_ALU_RGB_B_SWIZ_A_HALF (5 << 8) -# define R500_ALU_RGB_B_SWIZ_A_1 (6 << 8) -/* #define R500_ALU_RGB_B_SWIZ_A_UNUSED (7 << 8) */ -# define R500_ALU_RGB_MOD_A_NOP (0 << 11) -# define R500_ALU_RGB_MOD_A_NEG (1 << 11) -# define R500_ALU_RGB_MOD_A_ABS (2 << 11) -# define R500_ALU_RGB_MOD_A_NAB (3 << 11) -# define R500_ALU_RGB_SEL_B_SHIFT 13 -# define R500_ALU_RGB_SEL_B_SRC0 (0 << 13) -# define R500_ALU_RGB_SEL_B_SRC1 (1 << 13) -# define R500_ALU_RGB_SEL_B_SRC2 (2 << 13) -# define R500_ALU_RGB_SEL_B_SRCP (3 << 13) -# define R500_ALU_RGB_R_SWIZ_B_R (0 << 15) -# define R500_ALU_RGB_R_SWIZ_B_G (1 << 15) -# define R500_ALU_RGB_R_SWIZ_B_B (2 << 15) -# define R500_ALU_RGB_R_SWIZ_B_A (3 << 15) -# define R500_ALU_RGB_R_SWIZ_B_0 (4 << 15) -# define R500_ALU_RGB_R_SWIZ_B_HALF (5 << 15) -# define R500_ALU_RGB_R_SWIZ_B_1 (6 << 15) -/* #define R500_ALU_RGB_R_SWIZ_B_UNUSED (7 << 15) */ -# define R500_ALU_RGB_G_SWIZ_B_R (0 << 18) -# define R500_ALU_RGB_G_SWIZ_B_G (1 << 18) -# define R500_ALU_RGB_G_SWIZ_B_B (2 << 18) -# define R500_ALU_RGB_G_SWIZ_B_A (3 << 18) -# define R500_ALU_RGB_G_SWIZ_B_0 (4 << 18) -# define R500_ALU_RGB_G_SWIZ_B_HALF (5 << 18) -# define R500_ALU_RGB_G_SWIZ_B_1 (6 << 18) -/* #define R500_ALU_RGB_G_SWIZ_B_UNUSED (7 << 18) */ -# define R500_ALU_RGB_B_SWIZ_B_R (0 << 21) -# define R500_ALU_RGB_B_SWIZ_B_G (1 << 21) -# define R500_ALU_RGB_B_SWIZ_B_B (2 << 21) -# define R500_ALU_RGB_B_SWIZ_B_A (3 << 21) -# define R500_ALU_RGB_B_SWIZ_B_0 (4 << 21) -# define R500_ALU_RGB_B_SWIZ_B_HALF (5 << 21) -# define R500_ALU_RGB_B_SWIZ_B_1 (6 << 21) -/* #define R500_ALU_RGB_B_SWIZ_B_UNUSED (7 << 21) */ -# define R500_ALU_RGB_MOD_B_NOP (0 << 24) -# define R500_ALU_RGB_MOD_B_NEG (1 << 24) -# define R500_ALU_RGB_MOD_B_ABS (2 << 24) -# define R500_ALU_RGB_MOD_B_NAB (3 << 24) -# define R500_ALU_RGB_OMOD_IDENTITY (0 << 26) -# define R500_ALU_RGB_OMOD_MUL_2 (1 << 26) -# define R500_ALU_RGB_OMOD_MUL_4 (2 << 26) -# define R500_ALU_RGB_OMOD_MUL_8 (3 << 26) -# define R500_ALU_RGB_OMOD_DIV_2 (4 << 26) -# define R500_ALU_RGB_OMOD_DIV_4 (5 << 26) -# define R500_ALU_RGB_OMOD_DIV_8 (6 << 26) -# define R500_ALU_RGB_OMOD_DISABLE (7 << 26) -# define R500_ALU_RGB_TARGET(x) ((x) << 29) -# define R500_ALU_RGB_WMASK (1 << 31) -#define R500_US_ALU_RGB_ADDR_0 0x9000 -# define R500_RGB_ADDR0(x) ((x) << 0) -# define R500_RGB_ADDR0_CONST (1 << 8) -# define R500_RGB_ADDR0_REL (1 << 9) -# define R500_RGB_ADDR1(x) ((x) << 10) -# define R500_RGB_ADDR1_CONST (1 << 18) -# define R500_RGB_ADDR1_REL (1 << 19) -# define R500_RGB_ADDR2(x) ((x) << 20) -# define R500_RGB_ADDR2_CONST (1 << 28) -# define R500_RGB_ADDR2_REL (1 << 29) -# define R500_RGB_SRCP_OP_1_MINUS_2RGB0 (0 << 30) -# define R500_RGB_SRCP_OP_RGB1_MINUS_RGB0 (1 << 30) -# define R500_RGB_SRCP_OP_RGB1_PLUS_RGB0 (2 << 30) -# define R500_RGB_SRCP_OP_1_MINUS_RGB0 (3 << 30) -#define R500_US_CMN_INST_0 0xb800 -# define R500_INST_TYPE_MASK (3 << 0) -# define R500_INST_TYPE_ALU (0 << 0) -# define R500_INST_TYPE_OUT (1 << 0) -# define R500_INST_TYPE_FC (2 << 0) -# define R500_INST_TYPE_TEX (3 << 0) -# define R500_INST_TEX_SEM_WAIT (1 << 2) -# define R500_INST_RGB_PRED_SEL_NONE (0 << 3) -# define R500_INST_RGB_PRED_SEL_RGBA (1 << 3) -# define R500_INST_RGB_PRED_SEL_RRRR (2 << 3) -# define R500_INST_RGB_PRED_SEL_GGGG (3 << 3) -# define R500_INST_RGB_PRED_SEL_BBBB (4 << 3) -# define R500_INST_RGB_PRED_SEL_AAAA (5 << 3) -# define R500_INST_RGB_PRED_INV (1 << 6) -# define R500_INST_WRITE_INACTIVE (1 << 7) -# define R500_INST_LAST (1 << 8) -# define R500_INST_NOP (1 << 9) -# define R500_INST_ALU_WAIT (1 << 10) -# define R500_INST_RGB_WMASK_R (1 << 11) -# define R500_INST_RGB_WMASK_G (1 << 12) -# define R500_INST_RGB_WMASK_B (1 << 13) -# define R500_INST_ALPHA_WMASK (1 << 14) -# define R500_INST_RGB_OMASK_R (1 << 15) -# define R500_INST_RGB_OMASK_G (1 << 16) -# define R500_INST_RGB_OMASK_B (1 << 17) -# define R500_INST_ALPHA_OMASK (1 << 18) -# define R500_INST_RGB_CLAMP (1 << 19) -# define R500_INST_ALPHA_CLAMP (1 << 20) -# define R500_INST_ALU_RESULT_SEL (1 << 21) -# define R500_INST_ALPHA_PRED_INV (1 << 22) -# define R500_INST_ALU_RESULT_OP_EQ (0 << 23) -# define R500_INST_ALU_RESULT_OP_LT (1 << 23) -# define R500_INST_ALU_RESULT_OP_GE (2 << 23) -# define R500_INST_ALU_RESULT_OP_NE (3 << 23) -# define R500_INST_ALPHA_PRED_SEL_NONE (0 << 25) -# define R500_INST_ALPHA_PRED_SEL_RGBA (1 << 25) -# define R500_INST_ALPHA_PRED_SEL_RRRR (2 << 25) -# define R500_INST_ALPHA_PRED_SEL_GGGG (3 << 25) -# define R500_INST_ALPHA_PRED_SEL_BBBB (4 << 25) -# define R500_INST_ALPHA_PRED_SEL_AAAA (5 << 25) -/* XXX next four are kind of guessed */ -# define R500_INST_STAT_WE_R (1 << 28) -# define R500_INST_STAT_WE_G (1 << 29) -# define R500_INST_STAT_WE_B (1 << 30) -# define R500_INST_STAT_WE_A (1 << 31) - -/* note that these are 8 bit lengths, despite the offsets, at least for R500 */ -#define R500_US_CODE_ADDR 0x4630 -# define R500_US_CODE_START_ADDR(x) ((x) << 0) -# define R500_US_CODE_END_ADDR(x) ((x) << 16) -#define R500_US_CODE_OFFSET 0x4638 -# define R500_US_CODE_OFFSET_ADDR(x) ((x) << 0) -#define R500_US_CODE_RANGE 0x4634 -# define R500_US_CODE_RANGE_ADDR(x) ((x) << 0) -# define R500_US_CODE_RANGE_SIZE(x) ((x) << 16) -#define R500_US_CONFIG 0x4600 -# define R500_ZERO_TIMES_ANYTHING_EQUALS_ZERO (1 << 1) -#define R500_US_FC_ADDR_0 0xa000 -# define R500_FC_BOOL_ADDR(x) ((x) << 0) -# define R500_FC_INT_ADDR(x) ((x) << 8) -# define R500_FC_JUMP_ADDR(x) ((x) << 16) -# define R500_FC_JUMP_GLOBAL (1 << 31) -#define R500_US_FC_BOOL_CONST 0x4620 -# define R500_FC_KBOOL(x) (x) -#define R500_US_FC_CTRL 0x4624 -# define R500_FC_TEST_EN (1 << 30) -# define R500_FC_FULL_FC_EN (1 << 31) -#define R500_US_FC_INST_0 0x9800 -# define R500_FC_OP_JUMP (0 << 0) -# define R500_FC_OP_LOOP (1 << 0) -# define R500_FC_OP_ENDLOOP (2 << 0) -# define R500_FC_OP_REP (3 << 0) -# define R500_FC_OP_ENDREP (4 << 0) -# define R500_FC_OP_BREAKLOOP (5 << 0) -# define R500_FC_OP_BREAKREP (6 << 0) -# define R500_FC_OP_CONTINUE (7 << 0) -# define R500_FC_B_ELSE (1 << 4) -# define R500_FC_JUMP_ANY (1 << 5) -# define R500_FC_A_OP_NONE (0 << 6) -# define R500_FC_A_OP_POP (1 << 6) -# define R500_FC_A_OP_PUSH (2 << 6) -# define R500_FC_JUMP_FUNC(x) ((x) << 8) -# define R500_FC_B_POP_CNT(x) ((x) << 16) -# define R500_FC_B_OP0_NONE (0 << 24) -# define R500_FC_B_OP0_DECR (1 << 24) -# define R500_FC_B_OP0_INCR (2 << 24) -# define R500_FC_B_OP1_DECR (0 << 26) -# define R500_FC_B_OP1_NONE (1 << 26) -# define R500_FC_B_OP1_INCR (2 << 26) -# define R500_FC_IGNORE_UNCOVERED (1 << 28) -#define R500_US_FC_INT_CONST_0 0x4c00 -# define R500_FC_INT_CONST_KR(x) ((x) << 0) -# define R500_FC_INT_CONST_KG(x) ((x) << 8) -# define R500_FC_INT_CONST_KB(x) ((x) << 16) -/* _0 through _15 */ -#define R500_US_FORMAT0_0 0x4640 -# define R500_FORMAT_TXWIDTH(x) ((x) << 0) -# define R500_FORMAT_TXHEIGHT(x) ((x) << 11) -# define R500_FORMAT_TXDEPTH(x) ((x) << 22) -/* _0 through _3 */ -#define R500_US_OUT_FMT_0 0x46a4 -# define R500_OUT_FMT_C4_8 (0 << 0) -# define R500_OUT_FMT_C4_10 (1 << 0) -# define R500_OUT_FMT_C4_10_GAMMA (2 << 0) -# define R500_OUT_FMT_C_16 (3 << 0) -# define R500_OUT_FMT_C2_16 (4 << 0) -# define R500_OUT_FMT_C4_16 (5 << 0) -# define R500_OUT_FMT_C_16_MPEG (6 << 0) -# define R500_OUT_FMT_C2_16_MPEG (7 << 0) -# define R500_OUT_FMT_C2_4 (8 << 0) -# define R500_OUT_FMT_C_3_3_2 (9 << 0) -# define R500_OUT_FMT_C_6_5_6 (10 << 0) -# define R500_OUT_FMT_C_11_11_10 (11 << 0) -# define R500_OUT_FMT_C_10_11_11 (12 << 0) -# define R500_OUT_FMT_C_2_10_10_10 (13 << 0) -/* #define R500_OUT_FMT_RESERVED (14 << 0) */ -# define R500_OUT_FMT_UNUSED (15 << 0) -# define R500_OUT_FMT_C_16_FP (16 << 0) -# define R500_OUT_FMT_C2_16_FP (17 << 0) -# define R500_OUT_FMT_C4_16_FP (18 << 0) -# define R500_OUT_FMT_C_32_FP (19 << 0) -# define R500_OUT_FMT_C2_32_FP (20 << 0) -# define R500_OUT_FMT_C4_32_FP (21 << 0) -# define R500_C0_SEL_A (0 << 8) -# define R500_C0_SEL_R (1 << 8) -# define R500_C0_SEL_G (2 << 8) -# define R500_C0_SEL_B (3 << 8) -# define R500_C1_SEL_A (0 << 10) -# define R500_C1_SEL_R (1 << 10) -# define R500_C1_SEL_G (2 << 10) -# define R500_C1_SEL_B (3 << 10) -# define R500_C2_SEL_A (0 << 12) -# define R500_C2_SEL_R (1 << 12) -# define R500_C2_SEL_G (2 << 12) -# define R500_C2_SEL_B (3 << 12) -# define R500_C3_SEL_A (0 << 14) -# define R500_C3_SEL_R (1 << 14) -# define R500_C3_SEL_G (2 << 14) -# define R500_C3_SEL_B (3 << 14) -# define R500_OUT_SIGN(x) ((x) << 16) -# define R500_ROUND_ADJ (1 << 20) -#define R500_US_PIXSIZE 0x4604 -# define R500_PIX_SIZE(x) (x) -#define R500_US_TEX_ADDR_0 0x9800 -# define R500_TEX_SRC_ADDR(x) ((x) << 0) -# define R500_TEX_SRC_ADDR_REL (1 << 7) -# define R500_TEX_SRC_S_SWIZ_R (0 << 8) -# define R500_TEX_SRC_S_SWIZ_G (1 << 8) -# define R500_TEX_SRC_S_SWIZ_B (2 << 8) -# define R500_TEX_SRC_S_SWIZ_A (3 << 8) -# define R500_TEX_SRC_T_SWIZ_R (0 << 10) -# define R500_TEX_SRC_T_SWIZ_G (1 << 10) -# define R500_TEX_SRC_T_SWIZ_B (2 << 10) -# define R500_TEX_SRC_T_SWIZ_A (3 << 10) -# define R500_TEX_SRC_R_SWIZ_R (0 << 12) -# define R500_TEX_SRC_R_SWIZ_G (1 << 12) -# define R500_TEX_SRC_R_SWIZ_B (2 << 12) -# define R500_TEX_SRC_R_SWIZ_A (3 << 12) -# define R500_TEX_SRC_Q_SWIZ_R (0 << 14) -# define R500_TEX_SRC_Q_SWIZ_G (1 << 14) -# define R500_TEX_SRC_Q_SWIZ_B (2 << 14) -# define R500_TEX_SRC_Q_SWIZ_A (3 << 14) -# define R500_TEX_DST_ADDR(x) ((x) << 16) -# define R500_TEX_DST_ADDR_REL (1 << 23) -# define R500_TEX_DST_R_SWIZ_R (0 << 24) -# define R500_TEX_DST_R_SWIZ_G (1 << 24) -# define R500_TEX_DST_R_SWIZ_B (2 << 24) -# define R500_TEX_DST_R_SWIZ_A (3 << 24) -# define R500_TEX_DST_G_SWIZ_R (0 << 26) -# define R500_TEX_DST_G_SWIZ_G (1 << 26) -# define R500_TEX_DST_G_SWIZ_B (2 << 26) -# define R500_TEX_DST_G_SWIZ_A (3 << 26) -# define R500_TEX_DST_B_SWIZ_R (0 << 28) -# define R500_TEX_DST_B_SWIZ_G (1 << 28) -# define R500_TEX_DST_B_SWIZ_B (2 << 28) -# define R500_TEX_DST_B_SWIZ_A (3 << 28) -# define R500_TEX_DST_A_SWIZ_R (0 << 30) -# define R500_TEX_DST_A_SWIZ_G (1 << 30) -# define R500_TEX_DST_A_SWIZ_B (2 << 30) -# define R500_TEX_DST_A_SWIZ_A (3 << 30) -#define R500_US_TEX_ADDR_DXDY_0 0xa000 -# define R500_DX_ADDR(x) ((x) << 0) -# define R500_DX_ADDR_REL (1 << 7) -# define R500_DX_S_SWIZ_R (0 << 8) -# define R500_DX_S_SWIZ_G (1 << 8) -# define R500_DX_S_SWIZ_B (2 << 8) -# define R500_DX_S_SWIZ_A (3 << 8) -# define R500_DX_T_SWIZ_R (0 << 10) -# define R500_DX_T_SWIZ_G (1 << 10) -# define R500_DX_T_SWIZ_B (2 << 10) -# define R500_DX_T_SWIZ_A (3 << 10) -# define R500_DX_R_SWIZ_R (0 << 12) -# define R500_DX_R_SWIZ_G (1 << 12) -# define R500_DX_R_SWIZ_B (2 << 12) -# define R500_DX_R_SWIZ_A (3 << 12) -# define R500_DX_Q_SWIZ_R (0 << 14) -# define R500_DX_Q_SWIZ_G (1 << 14) -# define R500_DX_Q_SWIZ_B (2 << 14) -# define R500_DX_Q_SWIZ_A (3 << 14) -# define R500_DY_ADDR(x) ((x) << 16) -# define R500_DY_ADDR_REL (1 << 17) -# define R500_DY_S_SWIZ_R (0 << 24) -# define R500_DY_S_SWIZ_G (1 << 24) -# define R500_DY_S_SWIZ_B (2 << 24) -# define R500_DY_S_SWIZ_A (3 << 24) -# define R500_DY_T_SWIZ_R (0 << 26) -# define R500_DY_T_SWIZ_G (1 << 26) -# define R500_DY_T_SWIZ_B (2 << 26) -# define R500_DY_T_SWIZ_A (3 << 26) -# define R500_DY_R_SWIZ_R (0 << 28) -# define R500_DY_R_SWIZ_G (1 << 28) -# define R500_DY_R_SWIZ_B (2 << 28) -# define R500_DY_R_SWIZ_A (3 << 28) -# define R500_DY_Q_SWIZ_R (0 << 30) -# define R500_DY_Q_SWIZ_G (1 << 30) -# define R500_DY_Q_SWIZ_B (2 << 30) -# define R500_DY_Q_SWIZ_A (3 << 30) -#define R500_US_TEX_INST_0 0x9000 -# define R500_TEX_ID(x) ((x) << 16) -# define R500_TEX_INST_NOP (0 << 22) -# define R500_TEX_INST_LD (1 << 22) -# define R500_TEX_INST_TEXKILL (2 << 22) -# define R500_TEX_INST_PROJ (3 << 22) -# define R500_TEX_INST_LODBIAS (4 << 22) -# define R500_TEX_INST_LOD (5 << 22) -# define R500_TEX_INST_DXDY (6 << 22) -# define R500_TEX_SEM_ACQUIRE (1 << 25) -# define R500_TEX_IGNORE_UNCOVERED (1 << 26) -# define R500_TEX_UNSCALED (1 << 27) #define R600_US_W_FMT 0x46b4 # define R600_W_FMT_W0 (0 << 0) # define R600_W_FMT_W24 (1 << 0) |