| Age | Commit message (Collapse) | Author |
|---|
|
This drops the memblock manager for ZMASK. Instead, only one zbuffer can be
compressed at a time. Note that this does not necessarily have to be slower.
When there is a large number of zbuffers, compression might be used more often
than it was before. It's also easier to debug.
How it works:
1) 'clear' turns the compression on.
2) If some other zbuffer is set or the currently-bound zbuffer is used
for texturing, the driver decompresses it and then turns the compression off.
Notes:
- The ZMASK clear has been refactored, so that only one packet3 is used to clear
ZMASK.
- The 8x8 compression mode is disabled. I couldn't make it work without issues.
- Also removed driver-specific stuff from u_blitter.
Driver status:
- RV530 and R580 appear to just work (finally).
- RV570 should work, but there may be an issue that we don't correctly
calculate the number of dwords to clear, resulting in a partially
uninitialized zbuffer.
- RS690 misrenders as if no ZMASK clear happened. No idea what's going on.
- RV350 may even hardlock. This issue was already present and this patch doesn't
fix it.
I think we are still missing some hardware info we need to make the zbuffer
compression work fully.
Note that there is also an issue with HiZ, resulting in a sort of blocky
zigzagged corruption around some objects.
|
|
|
|
I couldn't make it work.
GB_TILE_CONFIG.Z_EXTENDED, which enables per-pixel Z clamping, and
VAP_CLIP_CNTL.CLIP_DISABLE, which disables clipping, do help, but they
also add regressions like random graphics corruptions in some games.
|
|
|
|
This reverts commit 88550083b3857184445075e70fed8b2eed4952a1.
|
|
r400 fragment shaders now support up to 64 temporary registers,
512 ALU instructions, and 512 TEX instructions.
|
|
We are not required to do the linear->sRGB conversion if ARB_framebuffer_sRGB
is unsupported. However I think the conversion should work in hw except
for blending, which matches the D3D9 behavior.
|
|
The hw can't do it and the code was useless anyway (it's lowered
in the GLSL compiler).
|
|
|
|
Performance++.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=32912
The fix is to call update_derived_state before user buffer uploads.
I've also moved some code around.
Unfortunately, there are still some ZMASK-related bugs which cause
misrendering, i.e. flushing doesn't always work and glean/fbo fails.
|
|
|
|
The motivation behind this rework is to get some speed by reducing
CPU overhead. The performance increase depends on many factors,
but it's measurable (I think it's about 10% increase in Torcs).
This commit replaces libdrm's radeon_cs_gem with our own implemention.
It's optimized specifically for r300g, but r600g could use it as well.
Reloc writes and space checking are faster and simpler than their
counterparts in libdrm (the time complexity of all the functions
is O(1) in nearly all scenarios, thanks to hashing).
(libdrm's radeon_bo_gem is still being used in the driver.)
It works like this:
cs_add_reloc(cs, buf, read_domain, write_domain) adds a new relocation and
also adds the size of 'buf' to the used_gart and used_vram winsys variables
based on the domains, which are simply or'd for the accounting purposes.
The adding is skipped if the reloc is already present in the list, but it
accounts any newly-referenced domains.
cs_validate is then called, which just checks:
used_vram/gart < vram/gart_size * 0.8
The 0.8 number allows for some memory fragmentation. If the validation
fails, the pipe driver flushes CS and tries do the validation again,
i.e. it validates only that one operation. If it fails again, it drops
the operation on the floor and prints some nasty message to stderr.
cs_write_reloc(cs, buf) just writes a reloc that has been added using
cs_add_reloc. The read_domain and write_domain parameters have been removed,
because we already specify them in cs_add_reloc.
The space checking has been tested by putting small values in vram/gart_size
variables.
|
|
Invalid after be1af4394e060677b7db6bbb8e3301e38a3363da (user buffer
creation with width0 == ~0).
Signed-off-by: Marek Olšák <maraeo@gmail.com>
|
|
This only uploads the [min_index, max_index] range instead of [0, userbuf size],
which greatly speeds up user buffer uploads.
This is also a prerequisite for atomizing vertex arrays in st/mesa.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=32634
|
|
It's no longer needed because the upload buffer remains mapped while the CS
is being filled (openarena, ut2004 and others that this code was for do not
use VBOs by default).
|
|
because the upload buffers are reused for subsequent draw operations.
|
|
- Added a parameter to specify a minimum offset that should be returned.
r300g needs this to better implement user buffer uploads. This weird
requirement comes from the fact that the Radeon DRM doesn't support negative
offsets.
- Added a parameter to notify a driver that the upload flush occured.
A driver may skip buffer validation if there was no flush, resulting
in a better performance.
- Added a new upload function that returns a pointer to the upload buffer
directly, so that the buffer can be filled e.g. by the translate module.
|
|
|
|
|
|
We shouldn't hit this bug in theory.
NOTE: This is a candidate for the 7.10 branch.
|
|
|
|
|
|
|
|
|
|
Based on a patch from Drill <drill87@gmail.com>.
NOTE: This is a candidate for the 7.10 branch.
|
|
still needs RADEON_HYPERZ=y env var.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Really no idea why I didn't see this before, but these values were opposite
the register spec.
this seems to fix rv530 HiZ on my laptop, will reenable in next commit.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Thanks to Marek Olšák for making my initial attempt actually work.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
If 'start' is odd, render the first triangle with indices embedded
in the command stream, which adds 3 to 'start' and makes it even.
Then continue with the fast path.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Even though a bound texture stays bound when calling set_fragment_sampler_views,
it must be assigned a new cache region depending on the occupancy of other
texture units.
This fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=28800
Thanks to Álmos <aaalmosss@gmail.com> for finding the bug in the code.
NOTE: This is a candidate for both the 7.9 and 7.10 branches.
|
|
The RS690 memory controller prefers things to be on a different
boundary than the discrete GPUs, we had an attempt to fix this,
but it still failed, this consolidates the stride calculation
into one place and removes the really special case check.
This fixes gnome-shell and 16 piglit tests on my rs690 system.
NOTE: This is a candidate for both the 7.9 and 7.10 branches.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The hardware apparently does support a zero stride, so let's use it.
This fixes missing objects in ETQW, but might also fix a ton of other
similar-looking bugs.
NOTE: This is a candidate for both the 7.9 and 7.10 branches.
|
|
|
|
This prevents needless buffer validation (CS space checking).
|
|
It's not always possible to preprocess the content of 3D_LOAD_VBPNTR
in a command buffer, because the offset to all vertex buffers (which
the packet depends on) is derived from the "start" parameter of draw_arrays
and the "indexBias" parameter of draw_elements, but we can at least lazily
make a command buffer for the case when offset == 0, which should occur
most of the time.
|
|
This also removes DBG_STATS (the stats can be obtained with valgrind instead).
|
|
|
|
Finished up by Marek Olšák.
We can set the constant space to use a different area per-call to the shader,
we can avoid flushing the PVS as often as we do by spreading out the constants
across the whole constant space.
Signed-off-by: Marek Olšák <maraeo@gmail.com>
|
|
It appears to be a constant buffer index (in case there are more constant
buffers explicitly used by a shader), i.e. something that Gallium currently
does not use. We treated it incorrectly as the offset to a constant buffer.
|
|
|
|
.. instead of calling r500_index_bias_supported(..) every draw call.
|
|
|
