summaryrefslogtreecommitdiff
path: root/src/mesa/drivers/dri/intel
AgeCommit message (Collapse)Author
2011-02-21intel: use throttle ioctl for throttlingChris Wilson
Rather than waiting on the first batch after the last swapbuffers to be retired, call into the kernel to wait upon the retirement of any request less than 20ms old. This has the twofold advantage of (a) not blocking any other clients from utilizing the device whilst we wait and (b) we attain higher throughput without overloading the system. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-21intel: Skip the flush before read-pixels via blitChris Wilson
As we will flush when reading the return values of the blit, we can forgo the earlier flush. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-21intel: extend current vertex buffersChris Wilson
If the next vertex arrays are a (discontiguous) continuation of the current arrays, such that the new vertices are simply offset from the start of the current vertex buffer definitions we can reuse those defintions and avoid the overhead of relocations and invalidations. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-21intel: Use specified alignment for writes into the upload bufferChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-21intel: combine short memcpy using a temporary allocated bufferChris Wilson
Using a temporary buffer for large discontiguous uploads into the common buffer and a single buffered upload is faster than performing the discontiguous copies through a mapping into the GTT. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-21i965: Move repeat-instruction-suppression to batchbuffer coreChris Wilson
Move the tracking of the last emitted instructions into the core batchbuffer routines and take advantage of the shadow batch copy to avoid extra memory allocations and copies. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-21intel: use pwrite for batchChris Wilson
It's faster. Not only is the memcpy more efficiently performed in the kernel (making up for the system call overhead), but by not using mmap we remove the greater overhead of tracking the vma of every batch. And it means we can read back from the batch buffer without incurring the cost of a uncached read through the GTT. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-21intel: Buffered uploadChris Wilson
Rather than performing lots of little writes to update the common bo upon each update, write those into a static buffer and flush that when full (or at the end of the batch). Doing so gives a dramatic performance improvement over and above using mmaped access. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-21intel: Replace the bo for a complete updateChris Wilson
Rather than performing a blit to completely overwrite a busy bo, simply discard it and create a new one with the fresh data. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-21i965: Combine vb upload buffer with the general upload bufferChris Wilson
Reuse the new common upload buffer for uploading temporary indices and rebuilt vertex arrays. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-21intel: Pack dynamic draws togetherChris Wilson
Dynamic arrays have the tendency to be small and so allocating a bo for each one is overkill and we can exploit many efficiency gains by packing them together. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-21intel: Use system memory for DYNAMIC_DRAW source objectsChris Wilson
Dynamic draw buffers are used by clients for temporary arrays and for uploading normal vertex arrays. By keeping the data in memory, we can avoid reusing active buffer objects and reallocate them as they are changed. This is important for Sandybridge which can not issue blits within a batch and so ends up flushing the batch upon every update, that is each batch only contains a single draw operation (if using dynamic arrays or regular arrays from system memory). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-12intel: Remove setup of the old dri/ meta code, which is now unused.Eric Anholt
2011-02-08mesa: remove _mesa_initialize_context_for_api()Brian Paul
Just add the gl_api parameter to _mesa_initialize_context().
2011-02-07intel: Implement dri2::{Allocate,Release}BufferBenjamin Franzke
2011-02-05mesa/965: add support for GL_EXT_framebuffer_sRGB (v2)Dave Airlie
This adds i965 support for GL_EXT_framebuffer_sRGB, it introduces a new constant to say that the driver can support sRGB enabled FBOs since enabling the extension doesn't mean the driver can actually support sRGB. Also adds the suggested state flush in the core code suggested by Brian. fix the ARB_fbo color encoding. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-16i965: add support for EXT_texture_sRGB_decodeDave Airlie
We just choose the texture format depending on the srgb decode bit for the sRGB formats. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-15mesa: begin implementation of GL_ARB_draw_buffers_blendBrian Paul
2011-01-14intel: Expose GL_ARB_ES2_compatibility.Eric Anholt
We don't have all of the features of this extension hooked up yet, but the consensus yesterday was that since those features are things that we should also be supporting in our ES2 implementation, claiming ES2 here too doesn't make anything worse and will make incremental improvement through piglit easier.
2011-01-14i915: Fix compiler warning from sw fallback removal change.Eric Anholt
2011-01-13i915: Disable extension OES_standard_derivativesChad Versace
OES_standard_derivatives must be manually disabled for i915 because Mesa enables it by default.
2011-01-10i965: Use a new miptree to avoid software fallbacks due to drawing offset.Eric Anholt
When attaching a small mipmap level to an FBO, the original gen4 didn't have the bits to support rendering to it. Instead of falling back, just blit it to a new little miptree just for it, and let it get revalidated into the stack later just like any other new teximage. Bug #30365.
2011-01-10intel: Drop the speculatively-use-firstImage-mt in validation.Eric Anholt
It's been replaced by just setting texObj->mt to image->mt at TexImage time.
2011-01-10intel: Don't relayout the texture on maxlevel change.Eric Anholt
This avoids relayouts in the common case of glGenerateMipmap() or people doing similar things. Bug #30366.
2011-01-10intel: When making a new teximage miptree, make a full one.Eric Anholt
If we hit this path, we're level 1+ and the base level got allocated as a single level instead of a full tree (so we don't match intelObj->mt). This tries to recover from that so that we end up with 2 allocations and 1 validation blit (old -> new) instead of allocations equal to number of levels and levels - 1 blits.
2011-01-10Revert "intel: Always allocate miptrees from level 0, not tObj->BaseLevel."Eric Anholt
This reverts commit 7ce6517f3ac41bf770ab39aba4509d4f535ef663. This reverts commit d60145d06d999c5c76000499e6fa9351e11d17fa. I was wrong about which generations supported baselevel adjustment -- it's just gen4, nothing earlier. This meant that i915 would have never used the mag filter when baselevel != 0. Not a severe bug, but not an intentional regression. I think we can fix the performance issue another way.
2011-01-09intel: Include mfeatures.h in files that perform feature tests.Vinson Lee
2011-01-07intel: Make renderbuffer tiling choice match texture tiling choice.Eric Anholt
There really shouldn't be any difference between the two for us. Fixes a bug where Z16 renderbuffers would be untiled on gen6, likely leading to hangs.
2011-01-07intel: Use the _BaseFormat from MESA_FORMAT_* in renderbuffer setup.Eric Anholt
2011-01-07i915: Don't claim to support AL1616 when neither 830 nor 915 does it.Eric Anholt
Fixes an abort in fbo-generatemipmap-formats.
2011-01-07intel: Add a vtbl hook for determining if a format is renderable.Eric Anholt
By relying on just intel_span_supports_format, some formats that aren't supported pre-gen4 were not reporting FBO incomplete. And we also complained in stderr when it happened on i915 because draw_region gets called before framebuffer completeness validation.
2011-01-07intel: expose ARB_framebuffer_object in the i915 driver.Eric Anholt
ARB_fbo no longer disallows mismatched width/height on attachments (shouldn't be any problem), mixed format color attachments (we only support 1), and L/A/LA/I color attachments (we already reject them on 965 too). It requires Gen'ed names (driver doesn't care), and adds FramebufferTextureLayer (we don't do texture arrays). So it looks like we're already in the position we need to be for this extension. Bug #27468, #32381.
2011-01-06i965: skip too small size mipmapZou Nan hai
this fixes doom3 crash.
2011-01-05intel: Always allocate miptrees from level 0, not tObj->BaseLevel.Eric Anholt
BaseLevel/MaxLevel are mostly used for two things: clamping texture access for FBO rendering, and limiting the used mipmap levels when incrementally loading textures. By restricting our mipmap trees to just the current BaseLevel/MaxLevel, we caused reallocation thrashing in the common case, for a theoretical win if someone really did want just levels 2..4 or whatever of their texture object. Bug #30366
2011-01-05intel: Drop unused first/lastlevel args to miptree_create_for_region.Eric Anholt
We're always making a single-level, 0-baselevel miptree.
2011-01-05intel: Clarify first_level/last_level vs baselevel/maxlevel by deletion.Eric Anholt
This has always been ugly about our texture code -- object base/max level vs intel object first/last level vs image level vs miptree first/last level. We now get rid of intelObj->first_level which is just tObj->BaseLevel, and make intelObj->_MaxLevel clearly based off of tObj->_MaxLevel instead of duplicating its code (incorrectly, as image->MaxLog2 only considers width/height and not depth!)
2011-01-05i915: Implement min/max lod clamping in hardware on 8xx.Eric Anholt
This avoids 8xx-specific texture relayout for min/max lod changes. One step closer to avoiding relayout for base/maxlevel changes!
2011-01-05intel: Drop TEXTURE_RECTANGLE check in miptree layout setup.Eric Anholt
It's already handled by our non-mipmapped MinFilter, since TEXTURE_RECTANGLE is always NEAREST or LINEAR.
2011-01-05intel: Clean up redundant setup of firstLevel.Eric Anholt
It's always BaseLevel (since TEXTURE_RECTANGLE's baselevel can't be changed from 0), except for 8xx minlod hilarity.
2011-01-05intel: Drop a check for GL_TEXTURE_4D_SGIS.Eric Anholt
The SGIS_texture4D extension was thankfully never completed, so we couldn't implement it if we wanted to.
2011-01-05i965: use BLT to clear buffer if possible on SandybridgeXiang, Haihao
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=32713
2011-01-04i965: Add support for SRGB DXT1 formats.Eric Anholt
This makes fbo-generatemipmap-formats GL_EXT_texture_sRGB-s3tc match fbo-generatemipmap-formats GL_EXT_texture_compression_s3tc and swrast in bad DXT1_RGBA alpha=0 handling, but it means we won't unpack and repack someone's textures into uncompressed SARGB8 format.
2011-01-04intel: Merge our choosetexformat fallbacks into core.Eric Anholt
We now share the type/format -> MESA_FORMAT_* mappings with software mesa, and the core supports most of the fallbacks hardware drivers will want.
2011-01-04intel: When validating an FBO's combined depth/stencil, use the given FBO.Eric Anholt
We were looking at the current draw buffer instead to see whether the depth/stencil combination matched. So you'd get told your framebuffer was complete, until you bound it and went to draw and we decided that it was incomplete.
2011-01-04intel: Fix segfaults from trying to use _ColorDrawBuffers in FBO validation.Eric Anholt
The _ColorDrawBuffers is a piece of computed state that gets for the current draw/read buffers at _mesa_update_state time. However, this function actually gets used for non-current draw/read buffers when checking if an FBO is complete from the driver's perspective. So, instead of trying to just look at the attachment points that are currently referenced by glDrawBuffers, look at all attachment points to see if they're driver-supported formats. This appears to actually be more in line with the intent of the spec, too. Fixes a segfault in my upcoming fbo-clear-formats piglit test, and hopefully bug #30278
2011-01-03intel: Use tri clears when we don't know how to blit clear the format.Eric Anholt
Bug #32207. Fixes ARB_texture_rg/fbo-clear-formats (see my fbo-clear-formats piglit branch currently)
2011-01-03intel: Handle forced swrast clears before other clear bits.Eric Anholt
Fixes a potential segfault on a non-native depthbuffer, and possible accidental swrast fallback on extra color buffers.
2010-12-27i965: Internally enable GL_NV_blend_square on ES2.Kenneth Graunke
Hopefully should fix bug #32520.
2010-12-25intel: Only do frame throttling at glFlush time when using frontbuffer.Eric Anholt
This is the hack for input interactivity of frontbuffer rendering (like we do for backbuffer at intelDRI2Flush()) by waiting for the n-2 frame to complete before starting a new one. However, for an application doing multiple contexts or regular rebinding of a single context, this would end up lockstepping the CPU to the GPU because every unbind was considered the end of a frame. Improves WOW performance on my Ironlake by 48.8% (+/- 2.3%, n=5)
2010-12-23intel: Remove unnecessary headers.Vinson Lee
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-07 11:56:53 +0000