| Age | Commit message (Collapse) | Author |
|---|
|
- Makes all three drivers use the same screen structure and setup code, with a
few ifdefs for the separate compilation to deal with symbols not being
available to all drivers and the fact that we have no mechanism for dealing
with different config options for different chip families in the same driver.
These issues should be dealt with later.
- Introduces IS_R[123]00_CLASS(radeonScreenPtr) macro for code for taking
different paths depending on the general class of chipset.
- Adds many new R300-class PCI IDs, though not all those listed in
radeon_driver.c.
|
|
|
|
with seccolor on rv200 and r200.
Submitted by: sroland
|
|
Change the initialization to fail if an unknown pci id is detected, instead of accepting all values which are not r100-based radeons.
|
|
|
|
executable memory. Based on Thomas Hellstrom's patch.
TODO: glapi.c also needs this, but cannot access this code.
|
|
vtxfmt not causing a fallback when fog coords are active.
|
|
|
|
radeon/r200AllocDmaRegionVerts function. No longer compile the radeon_compat stuff which was for drm 1.1 compatibility presumably but unused since about forever into the driver.
|
|
generic state functions. This is done in the vtxfmt/hwtcl/swtcl pathes respectively.
|
|
mode for lighting (potentially causes slight misrenderings with the specular components of lights if the light model is not set for local viewer).
|
|
|
|
point sprite primitive.
|
|
call driUpdateFramebufferSize() when window size/position changes.
|
|
ctx->Driver.Stencil*Separate() functions.
|
|
code is in the new file r200_fragshader.c. Reverse engeneered by Dave Airlie and me
|
|
the r200 and radeon driver
|
|
Airlie, me)
|
|
_tnl_vertex_program_stage. Fixes crashes when using vertex programs. Tested on r200 only (fix by Keith Whitwell)
|
|
|
|
ARB_vertex_program. Disable ARB_vertex_program by default - it is incredibly slow, and just plain doesn't work anyway (arbvptorus fails an assertion, arbvpmesh has bogus output)
|
|
|
|
driNewRenderbuffer().
|
|
with pfCurrentPage value, in case it's initially 1 instead of 0.
|
|
|
|
|
|
this field actually used for anything?
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use driRenderbuffer's offset, pitch fields in the span routines.
Remove the SetBuffer driver function.
Consolidate the code for setting CTX_RB3D_COLOROFFSET and CTX_RB3D_COLORPITCH
state in new radeonUpdateDrawBuffer() function.
Old code is surrounded by #if 000 / #endif, temporarily.
|
|
|
|
texture sampling and texture environment, optimize away texture sampling for units if the result is not used, always emit the env instructions in-order and try to eliminate GL_REPLACE env instructions.
|
|
|
|
erroring out when it shouldn't. The errno could be changed by usleep() between
the ioctl call and the loop check, if a signal was received. This could cause
an EAGAIN return from the DRM_RADEON_TEXTURE ioctl to not loop again.
Instead of checking errno, check thevalue of ret itself, since it is a saved
(and sign-flipped) copy of errno from the ioctl call.
|
|
Add additional checks for the *DRIRec info structure passed in from the
device driver. This ensures that things fallback to indirect rendering if
the DDX driver has had modifications (i.e. removal of the drmAddress field).
|
|
'tcl_mode=1'. This fixes bugzilla #3972.
|
|
|
|
|
|
|
|
Therefore, drivers should not require it to run.
|
|
_glapi_add_entrypoint has been replaced by a new routine called
_glapi_add_dispatch. This new routine dynamically assignes dispatch offsets
to functions added. This allows IHVs to add support for extension functions
that do not have assigned dispatch offsets.
It also means that a driver has no idea what offset will be assigned to a
function. The vast majority of the changes in this commit account for that.
An additional table, driDispatchRemapTable, is added. Functions not in the
Linux OpenGL ABI (i.e., anything not in GL 1.2 + ARB_multitexture) has a
fixed offset in this new table. The entry in this table specifies the
offset in of the function in the real dispatch table.
The internal interface was also bumped from version 20050725 to 20050727.
This has been tested with various programs in progs/demos on:
radeon (Radeon Mobility M6)
r128 (Rage 128 Pro)
mga (G400)
|
|
that are currently obtained via glXGetProcAddress and all of the XF86DRI
functions are replaced with a funciton table. This table will be passed to
__driCreateNewScreen.
One of the functions in the table is getProcAddress. This allows some
loaders to expose functionality not in all loaders. This will be immediatly
used for glxEnableExtension (formerly known to drivers as
__glXScrEnableExtension). libGL (and in the future libglx) expose this
function so that drivers can enable GLX extensions. libEGL should exposed
eglEnableExtension to enable EGL extensions. The same function cannot be
used for both because the extensions have different names and (possibly)
different semantics. Drivers can optionally use one, both, or neither.
The key parts are in the __DRIinterfaceMethodsRec structure in
dri_interface.h. A pointer to one of these structures is passed into
__driCreateNewScreen. Because of this, the version of the API is bumped to
20050725. Since the previous version(s) were never in a release, their
existance is erased.
I was actually a little surprised by how much code this cuts from the
drivers. A lot of glXGetProcAddress calls disappear, and a lot of
version checks go with them. Nice.
The one thing I'm not sure of is removing __glXInitialize. For some
reason that function was in the glXGetProcAddress table, but *nothing*
in the Mesa tree used it. Did something with DRI conf. use this
function? It seems odd...
|
|
1,402 lines of code to be removed from Mesa (drivers and libGL). The
big winner is dri_util.c.
Primary changes are:
1. Remove all "deprecated" entry-points from the various structures in
dri_interface.h.
2. Rename the remaining fields to removed "version numbers." So,
bindContext3 becomes bindContext. Functions with "New" in the name
(e.g., CreateNewContext) were *not* changed, but that is an option.
Having "New" in the name is less annoying to me than having "3" in the name.
3. Remove all compatibility code that handles cases where the driver or
the loader is too old to support the latest interfaces.
4. Append the API version to the __driCreateNewScreen function name.
This is currently done by hand. In the future (i.e., the next time we
make an incompatible change to the interface) we'll want to come up with
a better way to do this. This prevents old loaders from being able to load
new (incompatible) drivers.
5. Bump the API version to 20050722. All drivers (by way of dri_util.c)
require this version.
6. All drivers are *required* to expose GLX_SGIX_fbconfig and
GLX_OML_swap_method (or the moral equivalents). Support for these
functions in implicit in the use of the "new" interface.
7. Some cases still exist that need to be compiled differently in a loader
or core Mesa versus in a driver. These are identified by the define
IN_DRI_DRIVER.
|
|
generated file, called src/mesa/glapi/dispatch.h, is added. This file
contains three macros for each API function. It contains a GET, a SET, and
a CALL. Each of the macros take a pointer to the context and a pointer to
the dispatch table.
In several threads on mesa3d-dev we discussed replacing _glapi_add_entrypoint
with a new function called _glapi_add_dispatch. For this discussion, the
important difference between the two is that the caller of _glapi_add_dispatch
does *not* know what the dispatch offset will be at compile time. Because of
this callers need to track the dispatch offset returned by
_glapi_add_dispatch.
http://marc.theaimsgroup.com/?t=111947074700001&r=1&w=2
The downside is that driver code then has to access the dispatch table two
different ways. It accesses it using structure tags (e.g., exec->Begin) for
functions with fixed offsets and via a remap table (e.g., exec[
remap->NewExtensionFunction ]) for functions without fixed offsets. Yuck!
Using the macros allows both types of functions to be accessed
identically. If a driver needs to set a pointer for Begin, it does
'SET_Begin(ctx, exec, my_begin_function)'. If it needs to set a pointer
for NewExtensionFunction, it does 'SET_NewExtensionFunction(ctx, exec,
my_NewExtensionFunction_function)'. Furthermore, if at some point in
the future a static offset is assigned for NewExtensionFunction, only
the macros need to change (instead of every single place that accesses a
table for that function).
This code differs slightly from the originally posted patches in that the
CALL, GET, and SET marcos no longer take a context pointer as a parameter.
Brian Paul had suggested that the remap table could be stored as a global
since it would be set at CreateScreen time and would be constant for all
contexts. This change reflects that feedback.
http://marc.theaimsgroup.com/?t=112087194700001&r=1&w=2
|
|
so r200SetBuffer, r200SpanRenderStart and r200SpanRenderFinish get called again.
Bugzilla #3705, #3706.
|
|
individual drivers and put them in common code. It is still possible for a driver to define its own macros if it has special needs. This affects CLIPPIXEL, CLIPSPAN, HW_CLIPLOOP, HW_ENDCLIPLOOP, and for drivers using the spantmp2 template also GET_SRC_PTR and GET_DST_PTR.
|
