From 0a9510814e2dfff57f7d73cc68aece0554ad794d Mon Sep 17 00:00:00 2001 From: Marek Olšák Date: Fri, 25 Jun 2010 04:48:02 +0200 Subject: r300g: turn rasterizer state into a command buffer --- src/gallium/drivers/r300/r300_context.h | 36 ++---- src/gallium/drivers/r300/r300_emit.c | 42 +------ src/gallium/drivers/r300/r300_render_stencilref.c | 8 +- src/gallium/drivers/r300/r300_state.c | 134 ++++++++++++++++------ 4 files changed, 122 insertions(+), 98 deletions(-) (limited to 'src/gallium/drivers') diff --git a/src/gallium/drivers/r300/r300_context.h b/src/gallium/drivers/r300/r300_context.h index 5e35d89071..760336cc30 100644 --- a/src/gallium/drivers/r300/r300_context.h +++ b/src/gallium/drivers/r300/r300_context.h @@ -115,31 +115,19 @@ struct r300_rs_state { /* Draw-specific rasterizer state. */ struct pipe_rasterizer_state rs_draw; - uint32_t vap_control_status; /* R300_VAP_CNTL_STATUS: 0x2140 */ - uint32_t point_size; /* R300_GA_POINT_SIZE: 0x421c */ - uint32_t point_minmax; /* R300_GA_POINT_MINMAX: 0x4230 */ - uint32_t line_control; /* R300_GA_LINE_CNTL: 0x4234 */ - float depth_scale; /* R300_SU_POLY_OFFSET_FRONT_SCALE: 0x42a4 */ - /* R300_SU_POLY_OFFSET_BACK_SCALE: 0x42ac */ - float depth_offset; /* R300_SU_POLY_OFFSET_FRONT_OFFSET: 0x42a8 */ - /* R300_SU_POLY_OFFSET_BACK_OFFSET: 0x42b0 */ - uint32_t polygon_offset_enable; /* R300_SU_POLY_OFFSET_ENABLE: 0x42b4 */ - uint32_t cull_mode; /* R300_SU_CULL_MODE: 0x42b8 */ - uint32_t line_stipple_config; /* R300_GA_LINE_STIPPLE_CONFIG: 0x4328 */ - uint32_t line_stipple_value; /* R300_GA_LINE_STIPPLE_VALUE: 0x4260 */ + /* Command buffers. */ + uint32_t cb_main[25]; + uint32_t cb_poly_offset_zb16[5]; + uint32_t cb_poly_offset_zb24[5]; + + /* The index to cb_main where the cull_mode register value resides. */ + unsigned cull_mode_index; + + /* Whether polygon offset is enabled. */ + boolean polygon_offset_enable; + + /* This is emitted in the draw function. */ uint32_t color_control; /* R300_GA_COLOR_CONTROL: 0x4278 */ - uint32_t polygon_mode; /* R300_GA_POLY_MODE: 0x4288 */ - uint32_t clip_rule; /* R300_SC_CLIP_RULE: 0x43D0 */ - - /* Specifies top of Raster pipe specific enable controls, - * i.e. texture coordinates stuffing for points, lines, triangles */ - uint32_t stuffing_enable; /* R300_GB_ENABLE: 0x4008 */ - - /* Point sprites texture coordinates, 0: lower left, 1: upper right */ - float point_texcoord_left; /* R300_GA_POINT_S0: 0x4200 */ - float point_texcoord_bottom; /* R300_GA_POINT_T0: 0x4204 */ - float point_texcoord_right; /* R300_GA_POINT_S1: 0x4208 */ - float point_texcoord_top; /* R300_GA_POINT_T1: 0x420c */ }; struct r300_rs_block { diff --git a/src/gallium/drivers/r300/r300_emit.c b/src/gallium/drivers/r300/r300_emit.c index 65cddc8848..5effb61200 100644 --- a/src/gallium/drivers/r300/r300_emit.c +++ b/src/gallium/drivers/r300/r300_emit.c @@ -565,49 +565,17 @@ void r300_emit_invariant_state(struct r300_context *r300, void r300_emit_rs_state(struct r300_context* r300, unsigned size, void* state) { struct r300_rs_state* rs = state; - float scale, offset; CS_LOCALS(r300); BEGIN_CS(size); - OUT_CS_REG(R300_VAP_CNTL_STATUS, rs->vap_control_status); - OUT_CS_REG(R300_GA_POINT_SIZE, rs->point_size); - OUT_CS_REG_SEQ(R300_GA_POINT_MINMAX, 2); - OUT_CS(rs->point_minmax); - OUT_CS(rs->line_control); - + OUT_CS_TABLE(rs->cb_main, 25); if (rs->polygon_offset_enable) { - scale = rs->depth_scale * 12; - offset = rs->depth_offset; - - switch (r300->zbuffer_bpp) { - case 16: - offset *= 4; - break; - case 24: - offset *= 2; - break; + if (r300->zbuffer_bpp == 16) { + OUT_CS_TABLE(rs->cb_poly_offset_zb16, 5); + } else { + OUT_CS_TABLE(rs->cb_poly_offset_zb24, 5); } - - OUT_CS_REG_SEQ(R300_SU_POLY_OFFSET_FRONT_SCALE, 4); - OUT_CS_32F(scale); - OUT_CS_32F(offset); - OUT_CS_32F(scale); - OUT_CS_32F(offset); } - - OUT_CS_REG_SEQ(R300_SU_POLY_OFFSET_ENABLE, 2); - OUT_CS(rs->polygon_offset_enable); - OUT_CS(rs->cull_mode); - OUT_CS_REG(R300_GA_LINE_STIPPLE_CONFIG, rs->line_stipple_config); - OUT_CS_REG(R300_GA_LINE_STIPPLE_VALUE, rs->line_stipple_value); - OUT_CS_REG(R300_GA_POLY_MODE, rs->polygon_mode); - OUT_CS_REG(R300_SC_CLIP_RULE, rs->clip_rule); - OUT_CS_REG(R300_GB_ENABLE, rs->stuffing_enable); - OUT_CS_REG_SEQ(R300_GA_POINT_S0, 4); - OUT_CS_32F(rs->point_texcoord_left); - OUT_CS_32F(rs->point_texcoord_bottom); - OUT_CS_32F(rs->point_texcoord_right); - OUT_CS_32F(rs->point_texcoord_top); END_CS; } diff --git a/src/gallium/drivers/r300/r300_render_stencilref.c b/src/gallium/drivers/r300/r300_render_stencilref.c index d509ded3ec..9a6b4e12ff 100644 --- a/src/gallium/drivers/r300/r300_render_stencilref.c +++ b/src/gallium/drivers/r300/r300_render_stencilref.c @@ -64,12 +64,12 @@ static void r300_stencilref_begin(struct r300_context *r300) struct r300_dsa_state *dsa = (struct r300_dsa_state*)r300->dsa_state.state; /* Save state. */ - sr->rs_cull_mode = rs->cull_mode; + sr->rs_cull_mode = rs->cb_main[rs->cull_mode_index]; sr->zb_stencilrefmask = dsa->stencil_ref_mask; sr->ref_value_front = r300->stencil_ref.ref_value[0]; /* We *cull* pixels, therefore no need to mask out the bits. */ - rs->cull_mode |= R300_CULL_BACK; + rs->cb_main[rs->cull_mode_index] |= R300_CULL_BACK; r300->rs_state.dirty = TRUE; } @@ -81,7 +81,7 @@ static void r300_stencilref_switch_side(struct r300_context *r300) struct r300_rs_state *rs = (struct r300_rs_state*)r300->rs_state.state; struct r300_dsa_state *dsa = (struct r300_dsa_state*)r300->dsa_state.state; - rs->cull_mode = sr->rs_cull_mode | R300_CULL_FRONT; + rs->cb_main[rs->cull_mode_index] = sr->rs_cull_mode | R300_CULL_FRONT; dsa->stencil_ref_mask = dsa->stencil_ref_bf; r300->stencil_ref.ref_value[0] = r300->stencil_ref.ref_value[1]; @@ -97,7 +97,7 @@ static void r300_stencilref_end(struct r300_context *r300) struct r300_dsa_state *dsa = (struct r300_dsa_state*)r300->dsa_state.state; /* Restore state. */ - rs->cull_mode = sr->rs_cull_mode; + rs->cb_main[rs->cull_mode_index] = sr->rs_cull_mode; dsa->stencil_ref_mask = sr->zb_stencilrefmask; r300->stencil_ref.ref_value[0] = sr->ref_value_front; diff --git a/src/gallium/drivers/r300/r300_state.c b/src/gallium/drivers/r300/r300_state.c index ea1210fcb4..09e694f041 100644 --- a/src/gallium/drivers/r300/r300_state.c +++ b/src/gallium/drivers/r300/r300_state.c @@ -850,6 +850,27 @@ static void* r300_create_rs_state(struct pipe_context* pipe, struct r300_rs_state* rs = CALLOC_STRUCT(r300_rs_state); int i; float psiz; + uint32_t vap_control_status; /* R300_VAP_CNTL_STATUS: 0x2140 */ + uint32_t point_size; /* R300_GA_POINT_SIZE: 0x421c */ + uint32_t point_minmax; /* R300_GA_POINT_MINMAX: 0x4230 */ + uint32_t line_control; /* R300_GA_LINE_CNTL: 0x4234 */ + uint32_t polygon_offset_enable; /* R300_SU_POLY_OFFSET_ENABLE: 0x42b4 */ + uint32_t cull_mode; /* R300_SU_CULL_MODE: 0x42b8 */ + uint32_t line_stipple_config; /* R300_GA_LINE_STIPPLE_CONFIG: 0x4328 */ + uint32_t line_stipple_value; /* R300_GA_LINE_STIPPLE_VALUE: 0x4260 */ + uint32_t polygon_mode; /* R300_GA_POLY_MODE: 0x4288 */ + uint32_t clip_rule; /* R300_SC_CLIP_RULE: 0x43D0 */ + + /* Specifies top of Raster pipe specific enable controls, + * i.e. texture coordinates stuffing for points, lines, triangles */ + uint32_t stuffing_enable; /* R300_GB_ENABLE: 0x4008 */ + + /* Point sprites texture coordinates, 0: lower left, 1: upper right */ + float point_texcoord_left; /* R300_GA_POINT_S0: 0x4200 */ + float point_texcoord_bottom; /* R300_GA_POINT_T0: 0x4204 */ + float point_texcoord_right; /* R300_GA_POINT_S1: 0x4208 */ + float point_texcoord_top; /* R300_GA_POINT_T1: 0x420c */ + CB_LOCALS; /* Copy rasterizer state. */ rs->rs = *state; @@ -859,18 +880,18 @@ static void* r300_create_rs_state(struct pipe_context* pipe, rs->rs_draw.sprite_coord_enable = 0; /* We can do this in HW. */ #ifdef PIPE_ARCH_LITTLE_ENDIAN - rs->vap_control_status = R300_VC_NO_SWAP; + vap_control_status = R300_VC_NO_SWAP; #else - rs->vap_control_status = R300_VC_32BIT_SWAP; + vap_control_status = R300_VC_32BIT_SWAP; #endif /* If no TCL engine is present, turn off the HW TCL. */ if (!r300_screen(pipe->screen)->caps.has_tcl) { - rs->vap_control_status |= R300_VAP_TCL_BYPASS; + vap_control_status |= R300_VAP_TCL_BYPASS; } /* Point size width and height. */ - rs->point_size = + point_size = pack_float_16_6x(state->point_size) | (pack_float_16_6x(state->point_size) << R300_POINTSIZE_X_SHIFT); @@ -880,68 +901,67 @@ static void* r300_create_rs_state(struct pipe_context* pipe, * Clamp to [0, max FB size] */ psiz = pipe->screen->get_paramf(pipe->screen, PIPE_CAP_MAX_POINT_WIDTH); - rs->point_minmax = + point_minmax = pack_float_16_6x(psiz) << R300_GA_POINT_MINMAX_MAX_SHIFT; } else { /* We cannot disable the point-size vertex output, * so clamp it. */ psiz = state->point_size; - rs->point_minmax = + point_minmax = (pack_float_16_6x(psiz) << R300_GA_POINT_MINMAX_MIN_SHIFT) | (pack_float_16_6x(psiz) << R300_GA_POINT_MINMAX_MAX_SHIFT); } /* Line control. */ - rs->line_control = pack_float_16_6x(state->line_width) | + line_control = pack_float_16_6x(state->line_width) | R300_GA_LINE_CNTL_END_TYPE_COMP; /* Enable polygon mode */ + polygon_mode = 0; if (state->fill_front != PIPE_POLYGON_MODE_FILL || state->fill_back != PIPE_POLYGON_MODE_FILL) { - rs->polygon_mode = R300_GA_POLY_MODE_DUAL; + polygon_mode = R300_GA_POLY_MODE_DUAL; } /* Front face */ if (state->front_ccw) - rs->cull_mode = R300_FRONT_FACE_CCW; + cull_mode = R300_FRONT_FACE_CCW; else - rs->cull_mode = R300_FRONT_FACE_CW; + cull_mode = R300_FRONT_FACE_CW; /* Polygon offset */ + polygon_offset_enable = 0; if (util_get_offset(state, state->fill_front)) { - rs->polygon_offset_enable |= R300_FRONT_ENABLE; + polygon_offset_enable |= R300_FRONT_ENABLE; } if (util_get_offset(state, state->fill_back)) { - rs->polygon_offset_enable |= R300_BACK_ENABLE; + polygon_offset_enable |= R300_BACK_ENABLE; } + rs->polygon_offset_enable = polygon_offset_enable != 0; + /* Polygon mode */ - if (rs->polygon_mode) { - rs->polygon_mode |= + if (polygon_mode) { + polygon_mode |= r300_translate_polygon_mode_front(state->fill_front); - rs->polygon_mode |= + polygon_mode |= r300_translate_polygon_mode_back(state->fill_back); } if (state->cull_face & PIPE_FACE_FRONT) { - rs->cull_mode |= R300_CULL_FRONT; + cull_mode |= R300_CULL_FRONT; } if (state->cull_face & PIPE_FACE_BACK) { - rs->cull_mode |= R300_CULL_BACK; - } - - if (rs->polygon_offset_enable) { - rs->depth_offset = state->offset_units; - rs->depth_scale = state->offset_scale; + cull_mode |= R300_CULL_BACK; } if (state->line_stipple_enable) { - rs->line_stipple_config = + line_stipple_config = R300_GA_LINE_STIPPLE_CONFIG_LINE_RESET_LINE | (fui((float)state->line_stipple_factor) & R300_GA_LINE_STIPPLE_CONFIG_STIPPLE_SCALE_MASK); /* XXX this might need to be scaled up */ - rs->line_stipple_value = state->line_stipple_pattern; + line_stipple_value = state->line_stipple_pattern; } if (state->flatshade) { @@ -950,32 +970,80 @@ static void* r300_create_rs_state(struct pipe_context* pipe, rs->color_control = R300_SHADE_MODEL_SMOOTH; } - rs->clip_rule = state->scissor ? 0xAAAA : 0xFFFF; + clip_rule = state->scissor ? 0xAAAA : 0xFFFF; /* Point sprites */ + stuffing_enable = 0; if (state->sprite_coord_enable) { - rs->stuffing_enable = R300_GB_POINT_STUFF_ENABLE; + stuffing_enable = R300_GB_POINT_STUFF_ENABLE; for (i = 0; i < 8; i++) { if (state->sprite_coord_enable & (1 << i)) - rs->stuffing_enable |= + stuffing_enable |= R300_GB_TEX_STR << (R300_GB_TEX0_SOURCE_SHIFT + (i*2)); } - rs->point_texcoord_left = 0.0f; - rs->point_texcoord_right = 1.0f; + point_texcoord_left = 0.0f; + point_texcoord_right = 1.0f; switch (state->sprite_coord_mode) { case PIPE_SPRITE_COORD_UPPER_LEFT: - rs->point_texcoord_top = 0.0f; - rs->point_texcoord_bottom = 1.0f; + point_texcoord_top = 0.0f; + point_texcoord_bottom = 1.0f; break; case PIPE_SPRITE_COORD_LOWER_LEFT: - rs->point_texcoord_top = 1.0f; - rs->point_texcoord_bottom = 0.0f; + point_texcoord_top = 1.0f; + point_texcoord_bottom = 0.0f; break; } } + /* Build the main command buffer. */ + BEGIN_CB(rs->cb_main, 25); + OUT_CB_REG(R300_VAP_CNTL_STATUS, vap_control_status); + OUT_CB_REG(R300_GA_POINT_SIZE, point_size); + OUT_CB_REG_SEQ(R300_GA_POINT_MINMAX, 2); + OUT_CB(point_minmax); + OUT_CB(line_control); + OUT_CB_REG_SEQ(R300_SU_POLY_OFFSET_ENABLE, 2); + OUT_CB(polygon_offset_enable); + rs->cull_mode_index = 25 - cs_count; + OUT_CB(cull_mode); + OUT_CB_REG(R300_GA_LINE_STIPPLE_CONFIG, line_stipple_config); + OUT_CB_REG(R300_GA_LINE_STIPPLE_VALUE, line_stipple_value); + OUT_CB_REG(R300_GA_POLY_MODE, polygon_mode); + OUT_CB_REG(R300_SC_CLIP_RULE, clip_rule); + OUT_CB_REG(R300_GB_ENABLE, stuffing_enable); + OUT_CB_REG_SEQ(R300_GA_POINT_S0, 4); + OUT_CB_32F(point_texcoord_left); + OUT_CB_32F(point_texcoord_bottom); + OUT_CB_32F(point_texcoord_right); + OUT_CB_32F(point_texcoord_top); + END_CB; + + /* Build the two command buffers for polygon offset setup. */ + if (polygon_offset_enable) { + float scale = state->offset_scale * 12; + float offset = state->offset_units * 4; + + BEGIN_CB(rs->cb_poly_offset_zb16, 5); + OUT_CB_REG_SEQ(R300_SU_POLY_OFFSET_FRONT_SCALE, 4); + OUT_CB_32F(scale); + OUT_CB_32F(offset); + OUT_CB_32F(scale); + OUT_CB_32F(offset); + END_CB; + + offset = state->offset_units * 2; + + BEGIN_CB(rs->cb_poly_offset_zb24, 5); + OUT_CB_REG_SEQ(R300_SU_POLY_OFFSET_FRONT_SCALE, 4); + OUT_CB_32F(scale); + OUT_CB_32F(offset); + OUT_CB_32F(scale); + OUT_CB_32F(offset); + END_CB; + } + return (void*)rs; } -- cgit v1.2.3