#ifndef __NV30_SHADER_H__ #define __NV30_SHADER_H__ /* Vertex programs instruction set * * 128bit opcodes, split into 4 32-bit ones for ease of use. * * Non-native instructions * ABS - MOV + NV40_VP_INST0_DEST_ABS * POW - EX2 + MUL + LG2 * SUB - ADD, second source negated * SWZ - MOV * XPD - * * Register access * - Only one INPUT can be accessed per-instruction (move extras into TEMPs) * - Only one CONST can be accessed per-instruction (move extras into TEMPs) * * Relative Addressing * According to the value returned for * MAX_PROGRAM_NATIVE_ADDRESS_REGISTERS_ARB * * there are only two address registers available. The destination in the * ARL instruction is set to TEMP (The temp isn't actually written). * * When using vanilla ARB_v_p, the proprietary driver will squish both the * available ADDRESS regs into the first hardware reg in the X and Y * components. * * To use an address reg as an index into consts, the CONST_SRC is set to * (const_base + offset) and INDEX_CONST is set. * * To access the second address reg use ADDR_REG_SELECT_1. A particular * component of the address regs is selected with ADDR_SWZ. * * Only one address register can be accessed per instruction. * * Conditional execution (see NV_vertex_program{2,3} for details) Conditional * execution of an instruction is enabled by setting COND_TEST_ENABLE, and * selecting the condition which will allow the test to pass with * COND_{FL,LT,...}. It is possible to swizzle the values in the condition * register, which allows for testing against an individual component. * * Branching: * * The BRA/CAL instructions seem to follow a slightly different opcode * layout. The destination instruction ID (IADDR) overlaps a source field. * Instruction ID's seem to be numbered based on the UPLOAD_FROM_ID FIFO * command, and is incremented automatically on each UPLOAD_INST FIFO * command. * * Conditional branching is achieved by using the condition tests described * above. There doesn't appear to be dedicated looping instructions, but * this can be done using a temp reg + conditional branching. * * Subroutines may be uploaded before the main program itself, but the first * executed instruction is determined by the PROGRAM_START_ID FIFO command. * */ /* DWORD 0 */ #define NV30_VP_INST_ADDR_REG_SELECT_1 (1 << 24) #define NV30_VP_INST_SRC2_ABS (1 << 23) /* guess */ #define NV30_VP_INST_SRC1_ABS (1 << 22) /* guess */ #define NV30_VP_INST_SRC0_ABS (1 << 21) /* guess */ #define NV30_VP_INST_VEC_RESULT (1 << 20) #define NV30_VP_INST_DEST_TEMP_ID_SHIFT 16 #define NV30_VP_INST_DEST_TEMP_ID_MASK (0x0F << 16) #define NV30_VP_INST_COND_UPDATE_ENABLE (1<<15) #define NV30_VP_INST_VEC_DEST_TEMP_MASK (0xF << 16) #define NV30_VP_INST_COND_TEST_ENABLE (1<<14) #define NV30_VP_INST_COND_SHIFT 11 #define NV30_VP_INST_COND_MASK (0x07 << 11) # define NV30_VP_INST_COND_FL 0 /* guess */ # define NV30_VP_INST_COND_LT 1 # define NV30_VP_INST_COND_EQ 2 # define NV30_VP_INST_COND_LE 3 # define NV30_VP_INST_COND_GT 4 # define NV30_VP_INST_COND_NE 5 # define NV30_VP_INST_COND_GE 6 # define NV30_VP_INST_COND_TR 7 /* guess */ #define NV30_VP_INST_COND_SWZ_X_SHIFT 9 #define NV30_VP_INST_COND_SWZ_X_MASK (0x03 << 9) #define NV30_VP_INST_COND_SWZ_Y_SHIFT 7 #define NV30_VP_INST_COND_SWZ_Y_MASK (0x03 << 7) #define NV30_VP_INST_COND_SWZ_Z_SHIFT 5 #define NV30_VP_INST_COND_SWZ_Z_MASK (0x03 << 5) #define NV30_VP_INST_COND_SWZ_W_SHIFT 3 #define NV30_VP_INST_COND_SWZ_W_MASK (0x03 << 3) #define NV30_VP_INST_COND_SWZ_ALL_SHIFT 3 #define NV30_VP_INST_COND_SWZ_ALL_MASK (0xFF << 3) #define NV30_VP_INST_ADDR_SWZ_SHIFT 1 #define NV30_VP_INST_ADDR_SWZ_MASK (0x03 << 1) #define NV30_VP_INST_SCA_OPCODEH_SHIFT 0 #define NV30_VP_INST_SCA_OPCODEH_MASK (0x01 << 0) /* DWORD 1 */ #define NV30_VP_INST_SCA_OPCODEL_SHIFT 28 #define NV30_VP_INST_SCA_OPCODEL_MASK (0x0F << 28) # define NV30_VP_INST_OP_NOP 0x00 # define NV30_VP_INST_OP_RCP 0x02 # define NV30_VP_INST_OP_RCC 0x03 # define NV30_VP_INST_OP_RSQ 0x04 # define NV30_VP_INST_OP_EXP 0x05 # define NV30_VP_INST_OP_LOG 0x06 # define NV30_VP_INST_OP_LIT 0x07 # define NV30_VP_INST_OP_BRA 0x09 # define NV30_VP_INST_OP_CAL 0x0B # define NV30_VP_INST_OP_RET 0x0C # define NV30_VP_INST_OP_LG2 0x0D # define NV30_VP_INST_OP_EX2 0x0E # define NV30_VP_INST_OP_SIN 0x0F # define NV30_VP_INST_OP_COS 0x10 #define NV30_VP_INST_VEC_OPCODE_SHIFT 23 #define NV30_VP_INST_VEC_OPCODE_MASK (0x1F << 23) # define NV30_VP_INST_OP_NOPV 0x00 # define NV30_VP_INST_OP_MOV 0x01 # define NV30_VP_INST_OP_MUL 0x02 # define NV30_VP_INST_OP_ADD 0x03 # define NV30_VP_INST_OP_MAD 0x04 # define NV30_VP_INST_OP_DP3 0x05 # define NV30_VP_INST_OP_DP4 0x07 # define NV30_VP_INST_OP_DPH 0x06 # define NV30_VP_INST_OP_DST 0x08 # define NV30_VP_INST_OP_MIN 0x09 # define NV30_VP_INST_OP_MAX 0x0A # define NV30_VP_INST_OP_SLT 0x0B # define NV30_VP_INST_OP_SGE 0x0C # define NV30_VP_INST_OP_ARL 0x0D # define NV30_VP_INST_OP_FRC 0x0E # define NV30_VP_INST_OP_FLR 0x0F # define NV30_VP_INST_OP_SEQ 0x10 # define NV30_VP_INST_OP_SFL 0x11 # define NV30_VP_INST_OP_SGT 0x12 # define NV30_VP_INST_OP_SLE 0x13 # define NV30_VP_INST_OP_SNE 0x14 # define NV30_VP_INST_OP_STR 0x15 # define NV30_VP_INST_OP_SSG 0x16 # define NV30_VP_INST_OP_ARR 0x17 # define NV30_VP_INST_OP_ARA 0x18 #define NV30_VP_INST_CONST_SRC_SHIFT 14 #define NV30_VP_INST_CONST_SRC_MASK (0xFF << 14) #define NV30_VP_INST_INPUT_SRC_SHIFT 9 /*NV20*/ #define NV30_VP_INST_INPUT_SRC_MASK (0x0F << 9) /*NV20*/ # define NV30_VP_INST_IN_POS 0 /* These seem to match the bindings specified in */ # define NV30_VP_INST_IN_WEIGHT 1 /* the ARB_v_p spec (2.14.3.1) */ # define NV30_VP_INST_IN_NORMAL 2 # define NV30_VP_INST_IN_COL0 3 /* Should probably confirm them all though */ # define NV30_VP_INST_IN_COL1 4 # define NV30_VP_INST_IN_FOGC 5 # define NV30_VP_INST_IN_TC0 8 # define NV30_VP_INST_IN_TC(n) (8+n) #define NV30_VP_INST_SRC0H_SHIFT 0 /*NV20*/ #define NV30_VP_INST_SRC0H_MASK (0x1FF << 0) /*NV20*/ /* Please note: the IADDR fields overlap other fields because they are used * only for branch instructions. See Branching: label above * * DWORD 2 */ #define NV30_VP_INST_SRC0L_SHIFT 26 /*NV20*/ #define NV30_VP_INST_SRC0L_MASK (0x3F <<26) /* NV30_VP_SRC0_LOW_MASK << 26 */ #define NV30_VP_INST_SRC1_SHIFT 11 /*NV20*/ #define NV30_VP_INST_SRC1_MASK (0x7FFF<<11) /*NV20*/ #define NV30_VP_INST_SRC2H_SHIFT 0 /*NV20*/ #define NV30_VP_INST_SRC2H_MASK (0x7FF << 0) /* NV30_VP_SRC2_HIGH_MASK >> 4*/ #define NV30_VP_INST_IADDR_SHIFT 2 #define NV30_VP_INST_IADDR_MASK (0xF << 28) /* NV30_VP_SRC2_LOW_MASK << 28 */ /* DWORD 3 */ #define NV30_VP_INST_SRC2L_SHIFT 28 /*NV20*/ #define NV30_VP_INST_SRC2L_MASK (0x0F <<28) /*NV20*/ #define NV30_VP_INST_STEMP_WRITEMASK_SHIFT 24 #define NV30_VP_INST_STEMP_WRITEMASK_MASK (0x0F << 24) #define NV30_VP_INST_VTEMP_WRITEMASK_SHIFT 20 #define NV30_VP_INST_VTEMP_WRITEMASK_MASK (0x0F << 20) #define NV30_VP_INST_SDEST_WRITEMASK_SHIFT 16 #define NV30_VP_INST_SDEST_WRITEMASK_MASK (0x0F << 16) #define NV30_VP_INST_VDEST_WRITEMASK_SHIFT 12 /*NV20*/ #define NV30_VP_INST_VDEST_WRITEMASK_MASK (0x0F << 12) /*NV20*/ #define NV30_VP_INST_DEST_SHIFT 2 #define NV30_VP_INST_DEST_MASK (0x0F << 2) # define NV30_VP_INST_DEST_POS 0 # define NV30_VP_INST_DEST_BFC0 1 # define NV30_VP_INST_DEST_BFC1 2 # define NV30_VP_INST_DEST_COL0 3 # define NV30_VP_INST_DEST_COL1 4 # define NV30_VP_INST_DEST_FOGC 5 # define NV30_VP_INST_DEST_PSZ 6 # define NV30_VP_INST_DEST_TC(n) (8+n) #define NV30_VP_INST_LAST (1 << 0) /* Useful to split the source selection regs into their pieces */ #define NV30_VP_SRC0_HIGH_SHIFT 6 #define NV30_VP_SRC0_HIGH_MASK 0x00007FC0 #define NV30_VP_SRC0_LOW_MASK 0x0000003F #define NV30_VP_SRC2_HIGH_SHIFT 4 #define NV30_VP_SRC2_HIGH_MASK 0x00007FF0 #define NV30_VP_SRC2_LOW_MASK 0x0000000F /* Source-register definition - matches NV20 exactly */ #define NV30_VP_SRC_NEGATE (1<<14) #define NV30_VP_SRC_SWZ_X_SHIFT 12 #define NV30_VP_SRC_REG_SWZ_X_MASK (0x03 <<12) #define NV30_VP_SRC_SWZ_Y_SHIFT 10 #define NV30_VP_SRC_REG_SWZ_Y_MASK (0x03 <<10) #define NV30_VP_SRC_SWZ_Z_SHIFT 8 #define NV30_VP_SRC_REG_SWZ_Z_MASK (0x03 << 8) #define NV30_VP_SRC_SWZ_W_SHIFT 6 #define NV30_VP_SRC_REG_SWZ_W_MASK (0x03 << 6) #define NV30_VP_SRC_REG_SWZ_ALL_SHIFT 6 #define NV30_VP_SRC_REG_SWZ_ALL_MASK (0xFF << 6) #define NV30_VP_SRC_TEMP_SRC_SHIFT 2 #define NV30_VP_SRC_REG_TEMP_ID_MASK (0x0F << 0) #define NV30_VP_SRC_REG_TYPE_SHIFT 0 #define NV30_VP_SRC_REG_TYPE_MASK (0x03 << 0) #define NV30_VP_SRC_REG_TYPE_TEMP 1 #define NV30_VP_SRC_REG_TYPE_INPUT 2 #define NV30_VP_SRC_REG_TYPE_CONST 3 /* guess */ /* * Each fragment program opcode appears to be comprised of 4 32-bit values. * * 0 - Opcode, output reg/mask, ATTRIB source * 1 - Source 0 * 2 - Source 1 * 3 - Source 2 * * There appears to be no special difference between result regs and temp regs. * result.color == R0.xyzw * result.depth == R1.z * When the fragprog contains instructions to write depth, NV30_TCL_PRIMITIVE_3D_UNK1D78=0 * otherwise it is set to 1. * * Constants are inserted directly after the instruction that uses them. * * It appears that it's not possible to use two input registers in one * instruction as the input sourcing is done in the instruction dword * and not the source selection dwords. As such instructions such as: * * ADD result.color, fragment.color, fragment.texcoord[0]; * * must be split into two MOV's and then an ADD (nvidia does this) but * I'm not sure why it's not just one MOV and then source the second input * in the ADD instruction.. * * Negation of the full source is done with NV30_FP_REG_NEGATE, arbitrary * negation requires multiplication with a const. * * Arbitrary swizzling is supported with the exception of SWIZZLE_ZERO/SWIZZLE_ONE * The temp/result regs appear to be initialised to (0.0, 0.0, 0.0, 0.0) as SWIZZLE_ZERO * is implemented simply by not writing to the relevant components of the destination. * * Conditional execution * TODO * * Non-native instructions: * LIT * LRP - MAD+MAD * SUB - ADD, negate second source * RSQ - LG2 + EX2 * POW - LG2 + MUL + EX2 * SCS - COS + SIN * XPD */ //== Opcode / Destination selection == #define NV30_FP_OP_PROGRAM_END (1 << 0) #define NV30_FP_OP_OUT_REG_SHIFT 1 #define NV30_FP_OP_OUT_REG_MASK (31 << 1) /* uncertain */ /* Needs to be set when writing outputs to get expected result.. */ #define NV30_FP_OP_OUT_REG_HALF (1 << 7) #define NV30_FP_OP_COND_WRITE_ENABLE (1 << 8) #define NV30_FP_OP_OUTMASK_SHIFT 9 #define NV30_FP_OP_OUTMASK_MASK (0xF << 9) # define NV30_FP_OP_OUT_X (1<<9) # define NV30_FP_OP_OUT_Y (1<<10) # define NV30_FP_OP_OUT_Z (1<<11) # define NV30_FP_OP_OUT_W (1<<12) /* Uncertain about these, especially the input_src values.. it's possible that * they can be dynamically changed. */ #define NV30_FP_OP_INPUT_SRC_SHIFT 13 #define NV30_FP_OP_INPUT_SRC_MASK (15 << 13) # define NV30_FP_OP_INPUT_SRC_POSITION 0x0 # define NV30_FP_OP_INPUT_SRC_COL0 0x1 # define NV30_FP_OP_INPUT_SRC_COL1 0x2 # define NV30_FP_OP_INPUT_SRC_FOGC 0x3 # define NV30_FP_OP_INPUT_SRC_TC0 0x4 # define NV30_FP_OP_INPUT_SRC_TC(n) (0x4 + n) #define NV30_FP_OP_TEX_UNIT_SHIFT 17 #define NV30_FP_OP_TEX_UNIT_MASK (0xF << 17) /* guess */ #define NV30_FP_OP_PRECISION_SHIFT 22 #define NV30_FP_OP_PRECISION_MASK (3 << 22) # define NV30_FP_PRECISION_FP32 0 # define NV30_FP_PRECISION_FP16 1 # define NV30_FP_PRECISION_FX12 2 #define NV30_FP_OP_OPCODE_SHIFT 24 #define NV30_FP_OP_OPCODE_MASK (0x3F << 24) # define NV30_FP_OP_OPCODE_NOP 0x00 # define NV30_FP_OP_OPCODE_MOV 0x01 # define NV30_FP_OP_OPCODE_MUL 0x02 # define NV30_FP_OP_OPCODE_ADD 0x03 # define NV30_FP_OP_OPCODE_MAD 0x04 # define NV30_FP_OP_OPCODE_DP3 0x05 # define NV30_FP_OP_OPCODE_DP4 0x06 # define NV30_FP_OP_OPCODE_DST 0x07 # define NV30_FP_OP_OPCODE_MIN 0x08 # define NV30_FP_OP_OPCODE_MAX 0x09 # define NV30_FP_OP_OPCODE_SLT 0x0A # define NV30_FP_OP_OPCODE_SGE 0x0B # define NV30_FP_OP_OPCODE_SLE 0x0C # define NV30_FP_OP_OPCODE_SGT 0x0D # define NV30_FP_OP_OPCODE_SNE 0x0E # define NV30_FP_OP_OPCODE_SEQ 0x0F # define NV30_FP_OP_OPCODE_FRC 0x10 # define NV30_FP_OP_OPCODE_FLR 0x11 # define NV30_FP_OP_OPCODE_KIL 0x12 # define NV30_FP_OP_OPCODE_PK4B 0x13 # define NV30_FP_OP_OPCODE_UP4B 0x14 # define NV30_FP_OP_OPCODE_DDX 0x15 /* can only write XY */ # define NV30_FP_OP_OPCODE_DDY 0x16 /* can only write XY */ # define NV30_FP_OP_OPCODE_TEX 0x17 # define NV30_FP_OP_OPCODE_TXP 0x18 # define NV30_FP_OP_OPCODE_TXD 0x19 # define NV30_FP_OP_OPCODE_RCP 0x1A # define NV30_FP_OP_OPCODE_RSQ 0x1B # define NV30_FP_OP_OPCODE_EX2 0x1C # define NV30_FP_OP_OPCODE_LG2 0x1D # define NV30_FP_OP_OPCODE_LIT 0x1E # define NV30_FP_OP_OPCODE_LRP 0x1F # define NV30_FP_OP_OPCODE_STR 0x20 # define NV30_FP_OP_OPCODE_SFL 0x21 # define NV30_FP_OP_OPCODE_COS 0x22 # define NV30_FP_OP_OPCODE_SIN 0x23 # define NV30_FP_OP_OPCODE_PK2H 0x24 # define NV30_FP_OP_OPCODE_UP2H 0x25 # define NV30_FP_OP_OPCODE_POW 0x26 # define NV30_FP_OP_OPCODE_PK4UB 0x27 # define NV30_FP_OP_OPCODE_UP4UB 0x28 # define NV30_FP_OP_OPCODE_PK2US 0x29 # define NV30_FP_OP_OPCODE_UP2US 0x2A # define NV30_FP_OP_OPCODE_DP2A 0x2E # define NV30_FP_OP_OPCODE_TXB 0x31 # define NV30_FP_OP_OPCODE_RFL 0x36 # define NV30_FP_OP_OPCODE_DIV 0x3A #define NV30_FP_OP_OUT_SAT (1 << 31) /* high order bits of SRC0 */ #define NV30_FP_OP_OUT_ABS (1 << 29) #define NV30_FP_OP_COND_SWZ_W_SHIFT 27 #define NV30_FP_OP_COND_SWZ_W_MASK (3 << 27) #define NV30_FP_OP_COND_SWZ_Z_SHIFT 25 #define NV30_FP_OP_COND_SWZ_Z_MASK (3 << 25) #define NV30_FP_OP_COND_SWZ_Y_SHIFT 23 #define NV30_FP_OP_COND_SWZ_Y_MASK (3 << 23) #define NV30_FP_OP_COND_SWZ_X_SHIFT 21 #define NV30_FP_OP_COND_SWZ_X_MASK (3 << 21) #define NV30_FP_OP_COND_SWZ_ALL_SHIFT 21 #define NV30_FP_OP_COND_SWZ_ALL_MASK (0xFF << 21) #define NV30_FP_OP_COND_SHIFT 18 #define NV30_FP_OP_COND_MASK (0x07 << 18) # define NV30_FP_OP_COND_FL 0 # define NV30_FP_OP_COND_LT 1 # define NV30_FP_OP_COND_EQ 2 # define NV30_FP_OP_COND_LE 3 # define NV30_FP_OP_COND_GT 4 # define NV30_FP_OP_COND_NE 5 # define NV30_FP_OP_COND_GE 6 # define NV30_FP_OP_COND_TR 7 /* high order bits of SRC1 */ #define NV30_FP_OP_DST_SCALE_SHIFT 28 #define NV30_FP_OP_DST_SCALE_MASK (3 << 28) #define NV30_FP_OP_DST_SCALE_1X 0 #define NV30_FP_OP_DST_SCALE_2X 1 #define NV30_FP_OP_DST_SCALE_4X 2 #define NV30_FP_OP_DST_SCALE_8X 3 #define NV30_FP_OP_DST_SCALE_INV_2X 5 #define NV30_FP_OP_DST_SCALE_INV_4X 6 #define NV30_FP_OP_DST_SCALE_INV_8X 7 /* high order bits of SRC2 */ #define NV30_FP_OP_INDEX_INPUT (1 << 30) //== Register selection == #define NV30_FP_REG_TYPE_SHIFT 0 #define NV30_FP_REG_TYPE_MASK (3 << 0) # define NV30_FP_REG_TYPE_TEMP 0 # define NV30_FP_REG_TYPE_INPUT 1 # define NV30_FP_REG_TYPE_CONST 2 #define NV30_FP_REG_SRC_SHIFT 2 /* uncertain */ #define NV30_FP_REG_SRC_MASK (31 << 2) #define NV30_FP_REG_SRC_HALF (1 << 8) #define NV30_FP_REG_SWZ_ALL_SHIFT 9 #define NV30_FP_REG_SWZ_ALL_MASK (255 << 9) #define NV30_FP_REG_SWZ_X_SHIFT 9 #define NV30_FP_REG_SWZ_X_MASK (3 << 9) #define NV30_FP_REG_SWZ_Y_SHIFT 11 #define NV30_FP_REG_SWZ_Y_MASK (3 << 11) #define NV30_FP_REG_SWZ_Z_SHIFT 13 #define NV30_FP_REG_SWZ_Z_MASK (3 << 13) #define NV30_FP_REG_SWZ_W_SHIFT 15 #define NV30_FP_REG_SWZ_W_MASK (3 << 15) # define NV30_FP_SWIZZLE_X 0 # define NV30_FP_SWIZZLE_Y 1 # define NV30_FP_SWIZZLE_Z 2 # define NV30_FP_SWIZZLE_W 3 #define NV30_FP_REG_NEGATE (1 << 17) #define NV30SR_NONE 0 #define NV30SR_OUTPUT 1 #define NV30SR_INPUT 2 #define NV30SR_TEMP 3 #define NV30SR_CONST 4 struct nv30_sreg { int type; int index; int dst_scale; int negate; int abs; int swz[4]; int cc_update; int cc_update_reg; int cc_test; int cc_test_reg; int cc_swz[4]; }; static INLINE struct nv30_sreg nv30_sr(int type, int index) { struct nv30_sreg temp = { .type = type, .index = index, .dst_scale = DEF_SCALE, .abs = 0, .negate = 0, .swz = { 0, 1, 2, 3 }, .cc_update = 0, .cc_update_reg = 0, .cc_test = DEF_CTEST, .cc_test_reg = 0, .cc_swz = { 0, 1, 2, 3 }, }; return temp; } static INLINE struct nv30_sreg nv30_sr_swz(struct nv30_sreg src, int x, int y, int z, int w) { struct nv30_sreg dst = src; dst.swz[SWZ_X] = src.swz[x]; dst.swz[SWZ_Y] = src.swz[y]; dst.swz[SWZ_Z] = src.swz[z]; dst.swz[SWZ_W] = src.swz[w]; return dst; } static INLINE struct nv30_sreg nv30_sr_neg(struct nv30_sreg src) { src.negate = !src.negate; return src; } static INLINE struct nv30_sreg nv30_sr_abs(struct nv30_sreg src) { src.abs = 1; return src; } static INLINE struct nv30_sreg nv30_sr_scale(struct nv30_sreg src, int scale) { src.dst_scale = scale; return src; } #endif