diff options
| author | Ulf Samuelsson <ulf.samuelsson@atmel.com> | 2007-07-31 15:49:25 +0000 |
|---|---|---|
| committer | Ulf Samuelsson <ulf.samuelsson@atmel.com> | 2007-07-31 15:49:25 +0000 |
| commit | b97f0f63fa5227d384269515496cec2dfb9894bf (patch) | |
| tree | 128e9e9a4fb93b3f38b8d3003d49a0498f3ec496 | |
| parent | f2595b4c16718e2e0384d5ca01aadbd690c1688f (diff) | |
Add AVR32 kernel patches for linux-2.6.21.5
3 files changed, 19741 insertions, 0 deletions
diff --git a/toolchain/kernel-headers/linux-2.6.21.5-003-atmel.1-avr32-updates.patch b/toolchain/kernel-headers/linux-2.6.21.5-003-atmel.1-avr32-updates.patch new file mode 100644 index 000000000..a07c9f3f9 --- /dev/null +++ b/toolchain/kernel-headers/linux-2.6.21.5-003-atmel.1-avr32-updates.patch @@ -0,0 +1,17772 @@ +diff --git a/MAINTAINERS b/MAINTAINERS +index 277877a..a5bdfa6 100644 +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -1434,6 +1434,11 @@ L: linux-scsi@vger.kernel.org + W: http://www.icp-vortex.com/ + S: Supported + ++GENERIC GPIO I2C DRIVER ++P: Haavard Skinnemoen ++M: hskinnemoen@atmel.com ++S: Supported ++ + GENERIC HDLC DRIVER, N2, C101, PCI200SYN and WANXL DRIVERS + P: Krzysztof Halasa + M: khc@pm.waw.pl +diff --git a/Makefile b/Makefile +index 7980f39..388b666 100644 +--- a/Makefile ++++ b/Makefile +@@ -1,7 +1,7 @@ + VERSION = 2 + PATCHLEVEL = 6 + SUBLEVEL = 21 +-EXTRAVERSION = .3 ++EXTRAVERSION = .3.atmel.1 + NAME = Nocturnal Monster Puppy + + # *DOCUMENTATION* +diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig +index ce4013a..3956118 100644 +--- a/arch/avr32/Kconfig ++++ b/arch/avr32/Kconfig +@@ -57,9 +57,6 @@ config ARCH_HAS_ILOG2_U64 + bool + default n + +-config GENERIC_BUST_SPINLOCK +- bool +- + config GENERIC_HWEIGHT + bool + default y +@@ -68,6 +65,11 @@ config GENERIC_CALIBRATE_DELAY + bool + default y + ++config GENERIC_BUG ++ bool ++ default y ++ depends on BUG ++ + source "init/Kconfig" + + menu "System Type and features" +@@ -106,6 +108,9 @@ choice + config BOARD_ATSTK1000 + bool "ATSTK1000 evaluation board" + select BOARD_ATSTK1002 if CPU_AT32AP7000 ++ ++config BOARD_ATNGW100 ++ bool "ATNGW100 Network Gateway" + endchoice + + choice +@@ -116,6 +121,8 @@ config LOADER_U_BOOT + bool "U-Boot (or similar) bootloader" + endchoice + ++source "arch/avr32/mach-at32ap/Kconfig" ++ + config LOAD_ADDRESS + hex + default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y +@@ -164,6 +171,10 @@ config OWNERSHIP_TRACE + enabling Nexus-compliant debuggers to keep track of the PID of the + currently executing task. + ++config DW_DMAC ++ tristate "Synopsys DesignWare DMA Controller support" ++ default y if CPU_AT32AP7000 ++ + # FPU emulation goes here + + source "kernel/Kconfig.hz" +diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile +index 7b842e9..eb72198 100644 +--- a/arch/avr32/Makefile ++++ b/arch/avr32/Makefile +@@ -16,7 +16,7 @@ AFLAGS += -mrelax -mno-pic + CFLAGS_MODULE += -mno-relax + LDFLAGS_vmlinux += --relax + +-cpuflags-$(CONFIG_CPU_AP7000) += -mcpu=ap7000 ++cpuflags-$(CONFIG_CPU_AT32AP7000) += -mcpu=ap7000 + + CFLAGS += $(cpuflags-y) + AFLAGS += $(cpuflags-y) +@@ -27,9 +27,11 @@ head-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/head.o + head-y += arch/avr32/kernel/head.o + core-$(CONFIG_PLATFORM_AT32AP) += arch/avr32/mach-at32ap/ + core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/ ++core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/ + core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/ + core-y += arch/avr32/kernel/ + core-y += arch/avr32/mm/ ++drivers-y += arch/avr32/drivers/ + libs-y += arch/avr32/lib/ + + archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap +diff --git a/arch/avr32/boards/atngw100/Makefile b/arch/avr32/boards/atngw100/Makefile +new file mode 100644 +index 0000000..c740aa1 +--- /dev/null ++++ b/arch/avr32/boards/atngw100/Makefile +@@ -0,0 +1 @@ ++obj-y += setup.o flash.o +diff --git a/arch/avr32/boards/atngw100/flash.c b/arch/avr32/boards/atngw100/flash.c +new file mode 100644 +index 0000000..f9b32a8 +--- /dev/null ++++ b/arch/avr32/boards/atngw100/flash.c +@@ -0,0 +1,95 @@ ++/* ++ * ATNGW100 board-specific flash initialization ++ * ++ * Copyright (C) 2005-2006 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/partitions.h> ++#include <linux/mtd/physmap.h> ++ ++#include <asm/arch/smc.h> ++ ++static struct smc_config flash_config __initdata = { ++ .ncs_read_setup = 0, ++ .nrd_setup = 40, ++ .ncs_write_setup = 0, ++ .nwe_setup = 10, ++ ++ .ncs_read_pulse = 80, ++ .nrd_pulse = 40, ++ .ncs_write_pulse = 65, ++ .nwe_pulse = 55, ++ ++ .read_cycle = 120, ++ .write_cycle = 120, ++ ++ .bus_width = 2, ++ .nrd_controlled = 1, ++ .nwe_controlled = 1, ++ .byte_write = 1, ++}; ++ ++static struct mtd_partition flash_parts[] = { ++ { ++ .name = "u-boot", ++ .offset = 0x00000000, ++ .size = 0x00020000, /* 128 KiB */ ++ .mask_flags = MTD_WRITEABLE, ++ }, ++ { ++ .name = "root", ++ .offset = 0x00020000, ++ .size = 0x007d0000, ++ }, ++ { ++ .name = "env", ++ .offset = 0x007f0000, ++ .size = 0x00010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, ++}; ++ ++static struct physmap_flash_data flash_data = { ++ .width = 2, ++ .nr_parts = ARRAY_SIZE(flash_parts), ++ .parts = flash_parts, ++}; ++ ++static struct resource flash_resource = { ++ .start = 0x00000000, ++ .end = 0x007fffff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct platform_device flash_device = { ++ .name = "physmap-flash", ++ .id = 0, ++ .resource = &flash_resource, ++ .num_resources = 1, ++ .dev = { ++ .platform_data = &flash_data, ++ }, ++}; ++ ++/* This needs to be called after the SMC has been initialized */ ++static int __init atngw100_flash_init(void) ++{ ++ int ret; ++ ++ ret = smc_set_configuration(0, &flash_config); ++ if (ret < 0) { ++ printk(KERN_ERR "atngw100: failed to set NOR flash timing\n"); ++ return ret; ++ } ++ ++ platform_device_register(&flash_device); ++ ++ return 0; ++} ++device_initcall(atngw100_flash_init); +diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c +new file mode 100644 +index 0000000..3cbdc2d +--- /dev/null ++++ b/arch/avr32/boards/atngw100/setup.c +@@ -0,0 +1,131 @@ ++/* ++ * Board-specific setup code for the ATNGW100 Network Gateway ++ * ++ * Copyright (C) 2005-2006 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#include <linux/clk.h> ++#include <linux/etherdevice.h> ++#include <linux/init.h> ++#include <linux/linkage.h> ++#include <linux/platform_device.h> ++#include <linux/types.h> ++#include <linux/spi/spi.h> ++ ++#include <asm/io.h> ++#include <asm/setup.h> ++ ++#include <asm/arch/at32ap7000.h> ++#include <asm/arch/board.h> ++#include <asm/arch/init.h> ++ ++/* Initialized by bootloader-specific startup code. */ ++struct tag *bootloader_tags __initdata; ++ ++struct eth_addr { ++ u8 addr[6]; ++}; ++static struct eth_addr __initdata hw_addr[2]; ++static struct eth_platform_data __initdata eth_data[2]; ++ ++static struct spi_board_info spi0_board_info[] __initdata = { ++ { ++ .modalias = "mtd_dataflash", ++ .max_speed_hz = 10000000, ++ .chip_select = 0, ++ }, ++}; ++ ++static struct mci_platform_data __initdata mci0_data = { ++ .detect_pin = GPIO_PIN_PC(25), ++ .wp_pin = GPIO_PIN_PE(0), ++}; ++ ++/* ++ * The next two functions should go away as the boot loader is ++ * supposed to initialize the macb address registers with a valid ++ * ethernet address. But we need to keep it around for a while until ++ * we can be reasonably sure the boot loader does this. ++ * ++ * The phy_id is ignored as the driver will probe for it. ++ */ ++static int __init parse_tag_ethernet(struct tag *tag) ++{ ++ int i; ++ ++ i = tag->u.ethernet.mac_index; ++ if (i < ARRAY_SIZE(hw_addr)) ++ memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address, ++ sizeof(hw_addr[i].addr)); ++ ++ return 0; ++} ++__tagtable(ATAG_ETHERNET, parse_tag_ethernet); ++ ++static void __init set_hw_addr(struct platform_device *pdev) ++{ ++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ const u8 *addr; ++ void __iomem *regs; ++ struct clk *pclk; ++ ++ if (!res) ++ return; ++ if (pdev->id >= ARRAY_SIZE(hw_addr)) ++ return; ++ ++ addr = hw_addr[pdev->id].addr; ++ if (!is_valid_ether_addr(addr)) ++ return; ++ ++ /* ++ * Since this is board-specific code, we'll cheat and use the ++ * physical address directly as we happen to know that it's ++ * the same as the virtual address. ++ */ ++ regs = (void __iomem __force *)res->start; ++ pclk = clk_get(&pdev->dev, "pclk"); ++ if (!pclk) ++ return; ++ ++ clk_enable(pclk); ++ __raw_writel((addr[3] << 24) | (addr[2] << 16) ++ | (addr[1] << 8) | addr[0], regs + 0x98); ++ __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c); ++ clk_disable(pclk); ++ clk_put(pclk); ++} ++ ++struct platform_device *at32_usart_map[1]; ++unsigned int at32_nr_usarts = 1; ++ ++void __init setup_board(void) ++{ ++ at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */ ++ at32_setup_serial_console(0); ++} ++ ++static int __init atngw100_init(void) ++{ ++ /* ++ * ATNGW100 uses 16-bit SDRAM interface, so we don't need to ++ * reserve any pins for it. ++ */ ++ ++ at32_add_system_devices(); ++ ++ at32_add_device_usart(0); ++ ++ set_hw_addr(at32_add_device_eth(0, ð_data[0])); ++ set_hw_addr(at32_add_device_eth(1, ð_data[1])); ++ ++ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); ++ at32_add_device_mci(0, &mci0_data); ++ at32_add_device_usba(0); ++ ++ return 0; ++} ++postcore_initcall(atngw100_init); +diff --git a/arch/avr32/boards/atstk1000/atstk1000.h b/arch/avr32/boards/atstk1000/atstk1000.h +new file mode 100644 +index 0000000..9a49ed0 +--- /dev/null ++++ b/arch/avr32/boards/atstk1000/atstk1000.h +@@ -0,0 +1,15 @@ ++/* ++ * ATSTK1000 setup code: Daughterboard interface ++ * ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#ifndef __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H ++#define __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H ++ ++extern struct atmel_lcdfb_info atstk1000_lcdc_data; ++ ++#endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */ +diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c +index 5974768..84c22b2 100644 +--- a/arch/avr32/boards/atstk1000/atstk1002.c ++++ b/arch/avr32/boards/atstk1000/atstk1002.c +@@ -14,7 +14,12 @@ + #include <linux/platform_device.h> + #include <linux/string.h> + #include <linux/types.h> ++ + #include <linux/spi/spi.h> ++#include <linux/spi/at73c213.h> ++#include <linux/gpio_mouse.h> ++ ++#include <video/atmel_lcdc.h> + + #include <asm/io.h> + #include <asm/setup.h> +@@ -23,6 +28,7 @@ + #include <asm/arch/init.h> + #include <asm/arch/portmux.h> + ++#include "atstk1000.h" + + #define SW2_DEFAULT /* MMCI and UART_A available */ + +@@ -31,19 +37,82 @@ struct eth_addr { + }; + + static struct eth_addr __initdata hw_addr[2]; +- + static struct eth_platform_data __initdata eth_data[2]; +-extern struct lcdc_platform_data atstk1000_fb0_data; ++ ++static struct at73c213_board_info at73c213_data = { ++ .dac_clk = "gclk0", ++ .i2s_dev = 0, ++ .shortname = "AVR32 STK1000 external DAC", ++}; ++ ++static struct cf_platform_data __initdata cf0_data = { ++ .detect_pin = GPIO_PIN_PB(15), ++ .reset_pin = GPIO_PIN_PB(30), ++}; + + static struct spi_board_info spi0_board_info[] __initdata = { + { ++ /* AT73C213 */ ++ .modalias = "at73c213", ++ .max_speed_hz = 200000, ++ .chip_select = 0, ++ .mode = SPI_MODE_1, ++ .platform_data = &at73c213_data, ++ }, ++ { + /* QVGA display */ + .modalias = "ltv350qv", + .max_speed_hz = 16000000, + .chip_select = 1, ++ .mode = SPI_MODE_3, + }, + }; + ++static struct mci_platform_data __initdata mci0_data = { ++ .detect_pin = GPIO_PIN_NONE, ++ .wp_pin = GPIO_PIN_NONE, ++}; ++ ++/* The next two structs and functions are for adding gpio_mouse ++ * support to the board ++ */ ++static struct gpio_mouse_platform_data gpio_mouse0_data = { ++ .polarity = GPIO_MOUSE_POLARITY_ACT_LOW, ++ .up = GPIO_PIN_PB(2), ++ .down = GPIO_PIN_PB(1), ++ .left = GPIO_PIN_PB(3), ++ .right = GPIO_PIN_PB(0), ++ .bleft = GPIO_PIN_PB(7), ++ .bmiddle = GPIO_PIN_PB(6), ++ .bright = GPIO_PIN_PB(5), ++ .scan_ms = 10, ++}; ++ ++static struct platform_device gpio_mouse0_device = { ++ .name = "gpio_mouse", ++ .id = 0, ++ .dev = { ++ .platform_data = &gpio_mouse0_data, ++ }, ++}; ++ ++static void __init add_device_gpio_mouse0(void) ++{ ++ struct platform_device *pdev = &gpio_mouse0_device; ++ struct gpio_mouse_platform_data *data = pdev->dev.platform_data; ++ ++ at32_select_gpio(data->up, 0); ++ at32_select_gpio(data->down, 0); ++ at32_select_gpio(data->left, 0); ++ at32_select_gpio(data->right, 0); ++ ++ at32_select_gpio(data->bleft, 0); ++ at32_select_gpio(data->bmiddle, 0); ++ at32_select_gpio(data->bright, 0); ++ ++ platform_device_register(pdev); ++} ++ + /* + * The next two functions should go away as the boot loader is + * supposed to initialize the macb address registers with a valid +@@ -99,6 +168,29 @@ static void __init set_hw_addr(struct platform_device *pdev) + clk_put(pclk); + } + ++static void __init set_at73c213_init_gclk(struct at73c213_board_info *info) ++{ ++ struct clk *gclk = clk_get(NULL, info->dac_clk); ++ struct clk *pll = clk_get(NULL, "pll0"); ++ ++ if (!IS_ERR(gclk) && !IS_ERR(pll)) { ++ if(clk_set_parent(gclk, pll) != 0) ++ goto cleanup; ++ } else { ++ goto cleanup; ++ } ++ ++ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); ++ return; ++ ++cleanup: ++ if(!IS_ERR(gclk)) ++ clk_put(gclk); ++ if(!IS_ERR(pll)) ++ clk_put(pll); ++ return; ++} ++ + void __init setup_board(void) + { + #ifdef SW2_DEFAULT +@@ -148,7 +240,18 @@ static int __init atstk1002_init(void) + set_hw_addr(at32_add_device_eth(0, ð_data[0])); + + at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); +- at32_add_device_lcdc(0, &atstk1000_fb0_data); ++ at32_add_device_twi(0); ++ at32_add_device_mci(0, &mci0_data); ++ at32_add_device_lcdc(0, &atstk1000_lcdc_data, ++ fbmem_start, fbmem_size); ++ at32_add_device_usba(0); ++ at32_add_device_ssc(0, ATMEL_SSC_TX); ++ at32_add_device_abdac(0); ++ at32_add_device_cf(0, 3, &cf0_data); ++ ++ set_at73c213_init_gclk(&at73c213_data); ++ ++ add_device_gpio_mouse0(); + + return 0; + } +diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c +index 272c011..c9af409 100644 +--- a/arch/avr32/boards/atstk1000/setup.c ++++ b/arch/avr32/boards/atstk1000/setup.c +@@ -8,43 +8,56 @@ + * published by the Free Software Foundation. + */ + #include <linux/bootmem.h> ++#include <linux/fb.h> + #include <linux/init.h> + #include <linux/types.h> + #include <linux/linkage.h> + +-#include <asm/setup.h> ++#include <video/atmel_lcdc.h> + ++#include <asm/setup.h> + #include <asm/arch/board.h> + ++#include "atstk1000.h" ++ + /* Initialized by bootloader-specific startup code. */ + struct tag *bootloader_tags __initdata; + +-struct lcdc_platform_data __initdata atstk1000_fb0_data; +- +-void __init board_setup_fbmem(unsigned long fbmem_start, +- unsigned long fbmem_size) +-{ +- if (!fbmem_size) +- return; +- +- if (!fbmem_start) { +- void *fbmem; +- +- fbmem = alloc_bootmem_low_pages(fbmem_size); +- fbmem_start = __pa(fbmem); +- } else { +- pg_data_t *pgdat; +- +- for_each_online_pgdat(pgdat) { +- if (fbmem_start >= pgdat->bdata->node_boot_start +- && fbmem_start <= pgdat->bdata->node_low_pfn) +- reserve_bootmem_node(pgdat, fbmem_start, +- fbmem_size); +- } +- } +- +- printk("%luKiB framebuffer memory at address 0x%08lx\n", +- fbmem_size >> 10, fbmem_start); +- atstk1000_fb0_data.fbmem_start = fbmem_start; +- atstk1000_fb0_data.fbmem_size = fbmem_size; +-} ++static struct fb_videomode __initdata ltv350qv_modes[] = { ++ { ++ .name = "320x240 @ 75", ++ .refresh = 75, ++ .xres = 320, .yres = 240, ++ .pixclock = KHZ2PICOS(6891), ++ ++ .left_margin = 17, .right_margin = 33, ++ .upper_margin = 10, .lower_margin = 10, ++ .hsync_len = 16, .vsync_len = 1, ++ ++ .sync = 0, ++ .vmode = FB_VMODE_NONINTERLACED, ++ }, ++}; ++ ++static struct fb_monspecs __initdata atstk1000_default_monspecs = { ++ .manufacturer = "SNG", ++ .monitor = "LTV350QV", ++ .modedb = ltv350qv_modes, ++ .modedb_len = ARRAY_SIZE(ltv350qv_modes), ++ .hfmin = 14820, ++ .hfmax = 22230, ++ .vfmin = 60, ++ .vfmax = 90, ++ .dclkmax = 30000000, ++}; ++ ++struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = { ++ .default_bpp = 24, ++ .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, ++ .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT ++ | ATMEL_LCDC_INVCLK ++ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE ++ | ATMEL_LCDC_MEMOR_BIG), ++ .default_monspecs = &atstk1000_default_monspecs, ++ .guard_time = 2, ++}; +diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig +new file mode 100644 +index 0000000..c254ffc +--- /dev/null ++++ b/arch/avr32/configs/atngw100_defconfig +@@ -0,0 +1,1085 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.21-rc6 ++# Thu Apr 12 16:35:07 2007 ++# ++CONFIG_AVR32=y ++CONFIG_GENERIC_GPIO=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++CONFIG_GENERIC_TIME=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_GENERIC_BUG=y ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# Code maturity level options ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++ ++# ++# General setup ++# ++CONFIG_LOCALVERSION="" ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++# CONFIG_IPC_NS is not set ++CONFIG_SYSVIPC_SYSCTL=y ++CONFIG_POSIX_MQUEUE=y ++CONFIG_BSD_PROCESS_ACCT=y ++CONFIG_BSD_PROCESS_ACCT_V3=y ++# CONFIG_TASKSTATS is not set ++# CONFIG_UTS_NS is not set ++# CONFIG_AUDIT is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_SYSFS_DEPRECATED=y ++# CONFIG_RELAY is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++CONFIG_EMBEDDED=y ++# CONFIG_SYSCTL_SYSCALL is not set ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++# CONFIG_BASE_FULL is not set ++CONFIG_FUTEX=y ++CONFIG_EPOLL=y ++CONFIG_SHMEM=y ++CONFIG_SLAB=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=1 ++# CONFIG_SLOB is not set ++ ++# ++# Loadable module support ++# ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODULE_FORCE_UNLOAD=y ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++ ++# ++# Block layer ++# ++CONFIG_BLOCK=y ++# CONFIG_LBD is not set ++# CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_LSF is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++# CONFIG_IOSCHED_AS is not set ++# CONFIG_IOSCHED_DEADLINE is not set ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++ ++# ++# System Type and features ++# ++CONFIG_SUBARCH_AVR32B=y ++CONFIG_MMU=y ++CONFIG_PERFORMANCE_COUNTERS=y ++CONFIG_PLATFORM_AT32AP=y ++CONFIG_CPU_AT32AP7000=y ++# CONFIG_BOARD_ATSTK1000 is not set ++CONFIG_BOARD_ATNGW100=y ++CONFIG_LOADER_U_BOOT=y ++ ++# ++# Atmel AVR32 AP options ++# ++# CONFIG_AP7000_32_BIT_SMC is not set ++CONFIG_AP7000_16_BIT_SMC=y ++# CONFIG_AP7000_8_BIT_SMC is not set ++CONFIG_LOAD_ADDRESS=0x10000000 ++CONFIG_ENTRY_ADDRESS=0x90000000 ++CONFIG_PHYS_OFFSET=0x10000000 ++CONFIG_PREEMPT_NONE=y ++# CONFIG_PREEMPT_VOLUNTARY is not set ++# CONFIG_PREEMPT is not set ++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set ++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set ++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set ++CONFIG_ARCH_FLATMEM_ENABLE=y ++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set ++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++# CONFIG_SPARSEMEM_STATIC is not set ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=0 ++# CONFIG_OWNERSHIP_TRACE is not set ++# CONFIG_HZ_100 is not set ++CONFIG_HZ_250=y ++# CONFIG_HZ_300 is not set ++# CONFIG_HZ_1000 is not set ++CONFIG_HZ=250 ++CONFIG_CMDLINE="" ++ ++# ++# Bus options ++# ++ ++# ++# PCCARD (PCMCIA/CardBus) support ++# ++# CONFIG_PCCARD is not set ++ ++# ++# Executable file formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_BINFMT_MISC is not set ++ ++# ++# Networking ++# ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++# CONFIG_NETDEBUG is not set ++CONFIG_PACKET=y ++CONFIG_PACKET_MMAP=y ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++CONFIG_XFRM_USER=y ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++CONFIG_NET_KEY=y ++# CONFIG_NET_KEY_MIGRATE is not set ++CONFIG_INET=y ++CONFIG_IP_MULTICAST=y ++CONFIG_IP_ADVANCED_ROUTER=y ++CONFIG_ASK_IP_FIB_HASH=y ++# CONFIG_IP_FIB_TRIE is not set ++CONFIG_IP_FIB_HASH=y ++# CONFIG_IP_MULTIPLE_TABLES is not set ++# CONFIG_IP_ROUTE_MULTIPATH is not set ++# CONFIG_IP_ROUTE_VERBOSE is not set ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++# CONFIG_IP_PNP_BOOTP is not set ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++CONFIG_IP_MROUTE=y ++CONFIG_IP_PIMSM_V1=y ++# CONFIG_IP_PIMSM_V2 is not set ++# CONFIG_ARPD is not set ++CONFIG_SYN_COOKIES=y ++CONFIG_INET_AH=y ++CONFIG_INET_ESP=y ++CONFIG_INET_IPCOMP=y ++CONFIG_INET_XFRM_TUNNEL=y ++CONFIG_INET_TUNNEL=y ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++ ++# ++# IP: Virtual Server Configuration ++# ++# CONFIG_IP_VS is not set ++CONFIG_IPV6=y ++# CONFIG_IPV6_PRIVACY is not set ++# CONFIG_IPV6_ROUTER_PREF is not set ++CONFIG_INET6_AH=y ++CONFIG_INET6_ESP=y ++CONFIG_INET6_IPCOMP=y ++# CONFIG_IPV6_MIP6 is not set ++CONFIG_INET6_XFRM_TUNNEL=y ++CONFIG_INET6_TUNNEL=y ++CONFIG_INET6_XFRM_MODE_TRANSPORT=y ++CONFIG_INET6_XFRM_MODE_TUNNEL=y ++CONFIG_INET6_XFRM_MODE_BEET=y ++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set ++CONFIG_IPV6_SIT=y ++# CONFIG_IPV6_TUNNEL is not set ++# CONFIG_IPV6_MULTIPLE_TABLES is not set ++# CONFIG_NETWORK_SECMARK is not set ++CONFIG_NETFILTER=y ++# CONFIG_NETFILTER_DEBUG is not set ++ ++# ++# Core Netfilter Configuration ++# ++# CONFIG_NETFILTER_NETLINK is not set ++CONFIG_NF_CONNTRACK_ENABLED=m ++CONFIG_NF_CONNTRACK_SUPPORT=y ++# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set ++CONFIG_NF_CONNTRACK=m ++CONFIG_NF_CT_ACCT=y ++CONFIG_NF_CONNTRACK_MARK=y ++# CONFIG_NF_CONNTRACK_EVENTS is not set ++CONFIG_NF_CT_PROTO_GRE=m ++# CONFIG_NF_CT_PROTO_SCTP is not set ++CONFIG_NF_CONNTRACK_AMANDA=m ++CONFIG_NF_CONNTRACK_FTP=m ++CONFIG_NF_CONNTRACK_H323=m ++CONFIG_NF_CONNTRACK_IRC=m ++CONFIG_NF_CONNTRACK_NETBIOS_NS=m ++CONFIG_NF_CONNTRACK_PPTP=m ++CONFIG_NF_CONNTRACK_SANE=m ++CONFIG_NF_CONNTRACK_SIP=m ++CONFIG_NF_CONNTRACK_TFTP=m ++CONFIG_NETFILTER_XTABLES=y ++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m ++# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set ++# CONFIG_NETFILTER_XT_TARGET_DSCP is not set ++CONFIG_NETFILTER_XT_TARGET_MARK=m ++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m ++CONFIG_NETFILTER_XT_TARGET_NFLOG=m ++# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set ++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m ++CONFIG_NETFILTER_XT_MATCH_COMMENT=m ++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m ++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m ++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m ++# CONFIG_NETFILTER_XT_MATCH_DCCP is not set ++# CONFIG_NETFILTER_XT_MATCH_DSCP is not set ++CONFIG_NETFILTER_XT_MATCH_ESP=m ++CONFIG_NETFILTER_XT_MATCH_HELPER=m ++CONFIG_NETFILTER_XT_MATCH_LENGTH=m ++CONFIG_NETFILTER_XT_MATCH_LIMIT=m ++CONFIG_NETFILTER_XT_MATCH_MAC=m ++CONFIG_NETFILTER_XT_MATCH_MARK=m ++CONFIG_NETFILTER_XT_MATCH_POLICY=m ++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m ++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m ++CONFIG_NETFILTER_XT_MATCH_QUOTA=m ++CONFIG_NETFILTER_XT_MATCH_REALM=m ++# CONFIG_NETFILTER_XT_MATCH_SCTP is not set ++CONFIG_NETFILTER_XT_MATCH_STATE=m ++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m ++CONFIG_NETFILTER_XT_MATCH_STRING=m ++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m ++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m ++ ++# ++# IP: Netfilter Configuration ++# ++CONFIG_NF_CONNTRACK_IPV4=m ++CONFIG_NF_CONNTRACK_PROC_COMPAT=y ++# CONFIG_IP_NF_QUEUE is not set ++CONFIG_IP_NF_IPTABLES=m ++CONFIG_IP_NF_MATCH_IPRANGE=m ++CONFIG_IP_NF_MATCH_TOS=m ++CONFIG_IP_NF_MATCH_RECENT=m ++CONFIG_IP_NF_MATCH_ECN=m ++CONFIG_IP_NF_MATCH_AH=m ++CONFIG_IP_NF_MATCH_TTL=m ++CONFIG_IP_NF_MATCH_OWNER=m ++CONFIG_IP_NF_MATCH_ADDRTYPE=m ++CONFIG_IP_NF_FILTER=m ++CONFIG_IP_NF_TARGET_REJECT=m ++CONFIG_IP_NF_TARGET_LOG=m ++# CONFIG_IP_NF_TARGET_ULOG is not set ++CONFIG_NF_NAT=m ++CONFIG_NF_NAT_NEEDED=y ++CONFIG_IP_NF_TARGET_MASQUERADE=m ++CONFIG_IP_NF_TARGET_REDIRECT=m ++CONFIG_IP_NF_TARGET_NETMAP=m ++CONFIG_IP_NF_TARGET_SAME=m ++CONFIG_NF_NAT_SNMP_BASIC=m ++CONFIG_NF_NAT_PROTO_GRE=m ++CONFIG_NF_NAT_FTP=m ++CONFIG_NF_NAT_IRC=m ++CONFIG_NF_NAT_TFTP=m ++CONFIG_NF_NAT_AMANDA=m ++CONFIG_NF_NAT_PPTP=m ++CONFIG_NF_NAT_H323=m ++CONFIG_NF_NAT_SIP=m ++CONFIG_IP_NF_MANGLE=m ++CONFIG_IP_NF_TARGET_TOS=m ++CONFIG_IP_NF_TARGET_ECN=m ++CONFIG_IP_NF_TARGET_TTL=m ++CONFIG_IP_NF_TARGET_CLUSTERIP=m ++CONFIG_IP_NF_RAW=m ++CONFIG_IP_NF_ARPTABLES=m ++CONFIG_IP_NF_ARPFILTER=m ++CONFIG_IP_NF_ARP_MANGLE=m ++ ++# ++# IPv6: Netfilter Configuration (EXPERIMENTAL) ++# ++CONFIG_NF_CONNTRACK_IPV6=m ++CONFIG_IP6_NF_QUEUE=m ++CONFIG_IP6_NF_IPTABLES=m ++CONFIG_IP6_NF_MATCH_RT=m ++CONFIG_IP6_NF_MATCH_OPTS=m ++CONFIG_IP6_NF_MATCH_FRAG=m ++CONFIG_IP6_NF_MATCH_HL=m ++CONFIG_IP6_NF_MATCH_OWNER=m ++CONFIG_IP6_NF_MATCH_IPV6HEADER=m ++CONFIG_IP6_NF_MATCH_AH=m ++CONFIG_IP6_NF_MATCH_MH=m ++CONFIG_IP6_NF_MATCH_EUI64=m ++CONFIG_IP6_NF_FILTER=m ++CONFIG_IP6_NF_TARGET_LOG=m ++CONFIG_IP6_NF_TARGET_REJECT=m ++CONFIG_IP6_NF_MANGLE=m ++CONFIG_IP6_NF_TARGET_HL=m ++CONFIG_IP6_NF_RAW=m ++ ++# ++# DCCP Configuration (EXPERIMENTAL) ++# ++# CONFIG_IP_DCCP is not set ++ ++# ++# SCTP Configuration (EXPERIMENTAL) ++# ++# CONFIG_IP_SCTP is not set ++ ++# ++# TIPC Configuration (EXPERIMENTAL) ++# ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++CONFIG_VLAN_8021Q=m ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++ ++# ++# QoS and/or fair queueing ++# ++# CONFIG_NET_SCHED is not set ++CONFIG_NET_CLS_ROUTE=y ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_IEEE80211 is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_STANDALONE=y ++# CONFIG_PREVENT_FIRMWARE_BUILD is not set ++# CONFIG_FW_LOADER is not set ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++ ++# ++# Connector - unified userspace <-> kernelspace linker ++# ++# CONFIG_CONNECTOR is not set ++ ++# ++# Memory Technology Devices (MTD) ++# ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++# CONFIG_MTD_CONCAT is not set ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_REDBOOT_PARTS is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++CONFIG_MTD_CFI=y ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_GEN_PROBE=y ++# CONFIG_MTD_CFI_ADV_OPTIONS is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_CFI_INTELEXT is not set ++CONFIG_MTD_CFI_AMDSTD=y ++# CONFIG_MTD_CFI_STAA is not set ++CONFIG_MTD_CFI_UTIL=y ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++# CONFIG_MTD_OBSOLETE_CHIPS is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++CONFIG_MTD_PHYSMAP=y ++CONFIG_MTD_PHYSMAP_START=0x80000000 ++CONFIG_MTD_PHYSMAP_LEN=0x0 ++CONFIG_MTD_PHYSMAP_BANKWIDTH=2 ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++CONFIG_MTD_DATAFLASH=y ++# CONFIG_MTD_M25P80 is not set ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++ ++# ++# NAND Flash Device Drivers ++# ++# CONFIG_MTD_NAND is not set ++ ++# ++# OneNAND Flash Device Drivers ++# ++# CONFIG_MTD_ONENAND is not set ++ ++# ++# Parallel port support ++# ++# CONFIG_PARPORT is not set ++ ++# ++# Plug and Play support ++# ++# CONFIG_PNPACPI is not set ++ ++# ++# Block devices ++# ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=m ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++CONFIG_BLK_DEV_NBD=m ++CONFIG_BLK_DEV_RAM=m ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=4096 ++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++ ++# ++# Misc devices ++# ++ ++# ++# ATA/ATAPI/MFM/RLL support ++# ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++# CONFIG_SCSI is not set ++# CONFIG_SCSI_NETLINK is not set ++ ++# ++# Serial ATA (prod) and Parallel ATA (experimental) drivers ++# ++# CONFIG_ATA is not set ++ ++# ++# Multi-device support (RAID and LVM) ++# ++# CONFIG_MD is not set ++ ++# ++# Fusion MPT device support ++# ++# CONFIG_FUSION is not set ++ ++# ++# IEEE 1394 (FireWire) support ++# ++ ++# ++# I2O device support ++# ++ ++# ++# Network device support ++# ++CONFIG_NETDEVICES=y ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_EQUALIZER is not set ++CONFIG_TUN=m ++ ++# ++# PHY device support ++# ++# CONFIG_PHYLIB is not set ++ ++# ++# Ethernet (10 or 100Mbit) ++# ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=y ++CONFIG_MACB=y ++ ++# ++# Ethernet (1000 Mbit) ++# ++ ++# ++# Ethernet (10000 Mbit) ++# ++ ++# ++# Token Ring devices ++# ++ ++# ++# Wireless LAN (non-hamradio) ++# ++# CONFIG_NET_RADIO is not set ++ ++# ++# Wan interfaces ++# ++# CONFIG_WAN is not set ++CONFIG_PPP=m ++# CONFIG_PPP_MULTILINK is not set ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_ASYNC=m ++# CONFIG_PPP_SYNC_TTY is not set ++CONFIG_PPP_DEFLATE=m ++CONFIG_PPP_BSDCOMP=m ++CONFIG_PPP_MPPE=m ++CONFIG_PPPOE=m ++# CONFIG_SLIP is not set ++CONFIG_SLHC=m ++# CONFIG_SHAPER is not set ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++ ++# ++# ISDN subsystem ++# ++# CONFIG_ISDN is not set ++ ++# ++# Telephony Support ++# ++# CONFIG_PHONE is not set ++ ++# ++# Input device support ++# ++# CONFIG_INPUT is not set ++ ++# ++# Hardware I/O ports ++# ++# CONFIG_SERIO is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++# CONFIG_VT is not set ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++# CONFIG_SERIAL_8250 is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_ATMEL=y ++CONFIG_SERIAL_ATMEL_CONSOLE=y ++# CONFIG_SERIAL_ATMEL_TTYAT is not set ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++# CONFIG_LEGACY_PTYS is not set ++ ++# ++# IPMI ++# ++# CONFIG_IPMI_HANDLER is not set ++ ++# ++# Watchdog Cards ++# ++# CONFIG_WATCHDOG is not set ++# CONFIG_HW_RANDOM is not set ++# CONFIG_RTC is not set ++# CONFIG_GEN_RTC is not set ++# CONFIG_DTLK is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++ ++# ++# TPM devices ++# ++# CONFIG_TCG_TPM is not set ++ ++# ++# I2C support ++# ++# CONFIG_I2C is not set ++ ++# ++# SPI support ++# ++CONFIG_SPI=y ++# CONFIG_SPI_DEBUG is not set ++CONFIG_SPI_MASTER=y ++ ++# ++# SPI Master Controller Drivers ++# ++CONFIG_SPI_ATMEL=y ++# CONFIG_SPI_BITBANG is not set ++ ++# ++# SPI Protocol Masters ++# ++# CONFIG_SPI_AT25 is not set ++ ++# ++# Dallas's 1-wire bus ++# ++# CONFIG_W1 is not set ++ ++# ++# Hardware Monitoring support ++# ++# CONFIG_HWMON is not set ++# CONFIG_HWMON_VID is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_SM501 is not set ++ ++# ++# Multimedia devices ++# ++# CONFIG_VIDEO_DEV is not set ++ ++# ++# Digital Video Broadcasting Devices ++# ++# CONFIG_DVB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++# CONFIG_FB is not set ++ ++# ++# Sound ++# ++# CONFIG_SOUND is not set ++ ++# ++# USB support ++# ++# CONFIG_USB_ARCH_HAS_HCD is not set ++# CONFIG_USB_ARCH_HAS_OHCI is not set ++# CONFIG_USB_ARCH_HAS_EHCI is not set ++ ++# ++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' ++# ++ ++# ++# USB Gadget Support ++# ++# CONFIG_USB_GADGET is not set ++ ++# ++# MMC/SD Card support ++# ++# CONFIG_MMC is not set ++ ++# ++# LED devices ++# ++# CONFIG_NEW_LEDS is not set ++ ++# ++# LED drivers ++# ++ ++# ++# LED Triggers ++# ++ ++# ++# InfiniBand support ++# ++ ++# ++# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) ++# ++ ++# ++# Real Time Clock ++# ++# CONFIG_RTC_CLASS is not set ++ ++# ++# DMA Engine support ++# ++# CONFIG_DMA_ENGINE is not set ++ ++# ++# DMA Clients ++# ++ ++# ++# DMA Devices ++# ++ ++# ++# Auxiliary Display support ++# ++ ++# ++# Virtualization ++# ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++# CONFIG_EXT3_FS_XATTR is not set ++# CONFIG_EXT4DEV_FS is not set ++CONFIG_JBD=y ++# CONFIG_JBD_DEBUG is not set ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++# CONFIG_FS_POSIX_ACL is not set ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_ROMFS_FS is not set ++# CONFIG_INOTIFY is not set ++# CONFIG_QUOTA is not set ++# CONFIG_DNOTIFY is not set ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++CONFIG_FUSE_FS=m ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=m ++CONFIG_MSDOS_FS=m ++CONFIG_VFAT_FS=m ++CONFIG_FAT_DEFAULT_CODEPAGE=850 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++# CONFIG_PROC_KCORE is not set ++CONFIG_PROC_SYSCTL=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++# CONFIG_HUGETLB_PAGE is not set ++CONFIG_RAMFS=y ++CONFIG_CONFIGFS_FS=y ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_FS_DEBUG=0 ++CONFIG_JFFS2_FS_WRITEBUFFER=y ++# CONFIG_JFFS2_SUMMARY is not set ++# CONFIG_JFFS2_FS_XATTR is not set ++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set ++CONFIG_JFFS2_ZLIB=y ++CONFIG_JFFS2_RTIME=y ++# CONFIG_JFFS2_RUBIN is not set ++# CONFIG_CRAMFS is not set ++# CONFIG_VXFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++ ++# ++# Network File Systems ++# ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++# CONFIG_NFS_V3_ACL is not set ++# CONFIG_NFS_V4 is not set ++# CONFIG_NFS_DIRECTIO is not set ++# CONFIG_NFSD is not set ++CONFIG_ROOT_NFS=y ++CONFIG_LOCKD=y ++CONFIG_LOCKD_V4=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++# CONFIG_RPCSEC_GSS_KRB5 is not set ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++CONFIG_SMB_FS=m ++# CONFIG_SMB_NLS_DEFAULT is not set ++CONFIG_CIFS=m ++# CONFIG_CIFS_STATS is not set ++# CONFIG_CIFS_WEAK_PW_HASH is not set ++# CONFIG_CIFS_XATTR is not set ++# CONFIG_CIFS_DEBUG2 is not set ++# CONFIG_CIFS_EXPERIMENTAL is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++# CONFIG_9P_FS is not set ++ ++# ++# Partition Types ++# ++# CONFIG_PARTITION_ADVANCED is not set ++CONFIG_MSDOS_PARTITION=y ++ ++# ++# Native Language Support ++# ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++# CONFIG_NLS_CODEPAGE_437 is not set ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++CONFIG_NLS_CODEPAGE_850=y ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++# CONFIG_NLS_ASCII is not set ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++CONFIG_NLS_UTF8=y ++ ++# ++# Distributed Lock Manager ++# ++# CONFIG_DLM is not set ++ ++# ++# Kernel hacking ++# ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_LOG_BUF_SHIFT=14 ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_DEBUG_SLAB is not set ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++# CONFIG_DEBUG_SPINLOCK is not set ++# CONFIG_DEBUG_MUTEXES is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++# CONFIG_DEBUG_INFO is not set ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_LIST is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_FORCED_INLINING is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_KPROBES is not set ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++ ++# ++# Cryptographic options ++# ++CONFIG_CRYPTO=y ++CONFIG_CRYPTO_ALGAPI=y ++CONFIG_CRYPTO_BLKCIPHER=y ++CONFIG_CRYPTO_HASH=y ++CONFIG_CRYPTO_MANAGER=y ++CONFIG_CRYPTO_HMAC=y ++# CONFIG_CRYPTO_XCBC is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_MD4 is not set ++CONFIG_CRYPTO_MD5=y ++CONFIG_CRYPTO_SHA1=y ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_WP512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_GF128MUL is not set ++CONFIG_CRYPTO_ECB=m ++CONFIG_CRYPTO_CBC=y ++CONFIG_CRYPTO_PCBC=m ++# CONFIG_CRYPTO_LRW is not set ++CONFIG_CRYPTO_DES=y ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++# CONFIG_CRYPTO_SERPENT is not set ++# CONFIG_CRYPTO_AES is not set ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++# CONFIG_CRYPTO_TEA is not set ++CONFIG_CRYPTO_ARC4=m ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++CONFIG_CRYPTO_DEFLATE=y ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_CRC32C is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++# CONFIG_CRYPTO_TEST is not set ++ ++# ++# Hardware crypto devices ++# ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_CRC_CCITT=m ++# CONFIG_CRC16 is not set ++CONFIG_CRC32=y ++# CONFIG_LIBCRC32C is not set ++CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y ++CONFIG_TEXTSEARCH=y ++CONFIG_TEXTSEARCH_KMP=m ++CONFIG_TEXTSEARCH_BM=m ++CONFIG_TEXTSEARCH_FSM=m ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_IOPORT=y +diff --git a/arch/avr32/drivers/Makefile b/arch/avr32/drivers/Makefile +new file mode 100644 +index 0000000..b429b75 +--- /dev/null ++++ b/arch/avr32/drivers/Makefile +@@ -0,0 +1 @@ ++obj-$(CONFIG_DW_DMAC) += dw-dmac.o +diff --git a/arch/avr32/drivers/dw-dmac.c b/arch/avr32/drivers/dw-dmac.c +new file mode 100644 +index 0000000..9c1d27a +--- /dev/null ++++ b/arch/avr32/drivers/dw-dmac.c +@@ -0,0 +1,761 @@ ++/* ++ * Driver for the Synopsys DesignWare DMA Controller ++ * ++ * Copyright (C) 2005-2006 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#include <linux/clk.h> ++#include <linux/device.h> ++#include <linux/dma-mapping.h> ++#include <linux/dmapool.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++ ++#include <asm/dma-controller.h> ++#include <asm/io.h> ++ ++#include "dw-dmac.h" ++ ++#define DMAC_NR_CHANNELS 3 ++#define DMAC_MAX_BLOCKSIZE 4095 ++ ++enum { ++ CH_STATE_FREE = 0, ++ CH_STATE_ALLOCATED, ++ CH_STATE_BUSY, ++}; ++ ++struct dw_dma_lli { ++ dma_addr_t sar; ++ dma_addr_t dar; ++ dma_addr_t llp; ++ u32 ctllo; ++ u32 ctlhi; ++ u32 sstat; ++ u32 dstat; ++}; ++ ++struct dw_dma_block { ++ struct dw_dma_lli *lli_vaddr; ++ dma_addr_t lli_dma_addr; ++}; ++ ++struct dw_dma_channel { ++ unsigned int state; ++ int is_cyclic; ++ struct dma_request_sg *req_sg; ++ struct dma_request_cyclic *req_cyclic; ++ unsigned int nr_blocks; ++ int direction; ++ struct dw_dma_block *block; ++}; ++ ++struct dw_dma_controller { ++ spinlock_t lock; ++ void * __iomem regs; ++ struct dma_pool *lli_pool; ++ struct clk *hclk; ++ struct dma_controller dma; ++ struct dw_dma_channel channel[DMAC_NR_CHANNELS]; ++}; ++#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma) ++ ++#define dmac_writel_hi(dmac, reg, value) \ ++ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4) ++#define dmac_readl_hi(dmac, reg) \ ++ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4) ++#define dmac_writel_lo(dmac, reg, value) \ ++ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg) ++#define dmac_readl_lo(dmac, reg) \ ++ __raw_readl((dmac)->regs + DW_DMAC_##reg) ++#define dmac_chan_writel_hi(dmac, chan, reg, value) \ ++ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \ ++ + DW_DMAC_CHAN_##reg + 4)) ++#define dmac_chan_readl_hi(dmac, chan, reg) \ ++ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4) ++#define dmac_chan_writel_lo(dmac, chan, reg, value) \ ++ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg) ++#define dmac_chan_readl_lo(dmac, chan, reg) \ ++ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg) ++#define set_channel_bit(dmac, reg, chan) \ ++ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8))) ++#define clear_channel_bit(dmac, reg, chan) \ ++ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8))) ++ ++static int dmac_alloc_channel(struct dma_controller *_dmac) ++{ ++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); ++ struct dw_dma_channel *chan; ++ unsigned long flags; ++ int i; ++ ++ spin_lock_irqsave(&dmac->lock, flags); ++ for (i = 0; i < DMAC_NR_CHANNELS; i++) ++ if (dmac->channel[i].state == CH_STATE_FREE) ++ break; ++ ++ if (i < DMAC_NR_CHANNELS) { ++ chan = &dmac->channel[i]; ++ chan->state = CH_STATE_ALLOCATED; ++ } else { ++ i = -EBUSY; ++ } ++ ++ spin_unlock_irqrestore(&dmac->lock, flags); ++ ++ return i; ++} ++ ++static void dmac_release_channel(struct dma_controller *_dmac, int channel) ++{ ++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); ++ ++ BUG_ON(channel >= DMAC_NR_CHANNELS ++ || dmac->channel[channel].state != CH_STATE_ALLOCATED); ++ ++ dmac->channel[channel].state = CH_STATE_FREE; ++} ++ ++static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac, ++ unsigned int nr_blocks) ++{ ++ struct dw_dma_block *block; ++ void *p; ++ unsigned int i; ++ ++ block = kmalloc(nr_blocks * sizeof(*block), ++ GFP_KERNEL); ++ if (unlikely(!block)) ++ return NULL; ++ ++ for (i = 0; i < nr_blocks; i++) { ++ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL, ++ &block[i].lli_dma_addr); ++ block[i].lli_vaddr = p; ++ if (unlikely(!p)) ++ goto fail; ++ } ++ ++ return block; ++ ++fail: ++ for (i = 0; i < nr_blocks; i++) { ++ if (!block[i].lli_vaddr) ++ break; ++ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr, ++ block[i].lli_dma_addr); ++ } ++ kfree(block); ++ return NULL; ++} ++ ++static void cleanup_channel(struct dw_dma_controller *dmac, ++ struct dw_dma_channel *chan) ++{ ++ unsigned int i; ++ ++ if (chan->nr_blocks > 1) { ++ for (i = 0; i < chan->nr_blocks; i++) ++ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr, ++ chan->block[i].lli_dma_addr); ++ kfree(chan->block); ++ } ++ ++ chan->state = CH_STATE_ALLOCATED; ++} ++ ++static int dmac_prepare_request_sg(struct dma_controller *_dmac, ++ struct dma_request_sg *req) ++{ ++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); ++ struct dw_dma_channel *chan; ++ unsigned long ctlhi, ctllo, cfghi, cfglo; ++ unsigned long block_size; ++ unsigned int nr_blocks; ++ int ret, i, direction; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&dmac->lock, flags); ++ ++ ret = -EINVAL; ++ if (req->req.channel >= DMAC_NR_CHANNELS ++ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED ++ || req->block_size > DMAC_MAX_BLOCKSIZE) { ++ spin_unlock_irqrestore(&dmac->lock, flags); ++ return -EINVAL; ++ } ++ ++ chan = &dmac->channel[req->req.channel]; ++ chan->state = CH_STATE_BUSY; ++ chan->req_sg = req; ++ chan->is_cyclic = 0; ++ ++ /* ++ * We have marked the channel as busy, so no need to keep the ++ * lock as long as we only touch the channel-specific ++ * registers ++ */ ++ spin_unlock_irqrestore(&dmac->lock, flags); ++ ++ /* ++ * There may be limitations in the driver and/or the DMA ++ * controller that prevents us from sending a whole ++ * scatterlist item in one go. Taking this into account, ++ * calculate the number of block transfers we need to set up. ++ * ++ * FIXME: Let the peripheral driver know about the maximum ++ * block size we support. We really don't want to use a ++ * different block size than what was suggested by the ++ * peripheral. ++ * ++ * Each block will get its own Linked List Item (LLI) below. ++ */ ++ block_size = req->block_size; ++ nr_blocks = req->nr_blocks; ++ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n", ++ block_size, nr_blocks, req->nr_sg); ++ ++ BUG_ON(nr_blocks == 0); ++ chan->nr_blocks = nr_blocks; ++ ++ ret = -EINVAL; ++ cfglo = cfghi = 0; ++ switch (req->direction) { ++ case DMA_DIR_MEM_TO_PERIPH: ++ direction = DMA_TO_DEVICE; ++ cfghi = req->periph_id << (43 - 32); ++ break; ++ ++ case DMA_DIR_PERIPH_TO_MEM: ++ direction = DMA_FROM_DEVICE; ++ cfghi = req->periph_id << (39 - 32); ++ break; ++ default: ++ goto out_unclaim_channel; ++ } ++ ++ chan->direction = direction; ++ ++ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi); ++ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo); ++ ++ ctlhi = block_size >> req->width; ++ ctllo = ((req->direction << 20) ++ // | (1 << 14) | (1 << 11) // source/dest burst trans len ++ | (req->width << 4) | (req->width << 1) ++ | (1 << 0)); // interrupt enable ++ ++ if (nr_blocks == 1) { ++ /* Only one block: No need to use block chaining */ ++ if (direction == DMA_TO_DEVICE) { ++ dmac_chan_writel_lo(dmac, req->req.channel, SAR, ++ req->sg->dma_address); ++ dmac_chan_writel_lo(dmac, req->req.channel, DAR, ++ req->data_reg); ++ ctllo |= 2 << 7; // no dst increment ++ } else { ++ dmac_chan_writel_lo(dmac, req->req.channel, SAR, ++ req->data_reg); ++ dmac_chan_writel_lo(dmac, req->req.channel, DAR, ++ req->sg->dma_address); ++ ctllo |= 2 << 9; // no src increment ++ } ++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo); ++ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi); ++ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo); ++ } else { ++ struct dw_dma_lli *lli, *lli_prev = NULL; ++ int j = 0, offset = 0; ++ ++ ret = -ENOMEM; ++ chan->block = allocate_blocks(dmac, nr_blocks); ++ if (!chan->block) ++ goto out_unclaim_channel; ++ ++ if (direction == DMA_TO_DEVICE) ++ ctllo |= 1 << 28 | 1 << 27 | 2 << 7; ++ else ++ ctllo |= 1 << 28 | 1 << 27 | 2 << 9; ++ ++ /* ++ * Map scatterlist items to blocks. One scatterlist ++ * item may need more than one block for the reasons ++ * mentioned above. ++ */ ++ for (i = 0; i < nr_blocks; i++) { ++ lli = chan->block[i].lli_vaddr; ++ if (lli_prev) { ++ lli_prev->llp = chan->block[i].lli_dma_addr; ++ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n", ++ i - 1, chan->block[i - 1].lli_vaddr, ++ chan->block[i - 1].lli_dma_addr, ++ lli_prev->sar, lli_prev->dar, lli_prev->llp, ++ lli_prev->ctllo, lli_prev->ctlhi); ++ } ++ lli->llp = 0; ++ lli->ctllo = ctllo; ++ lli->ctlhi = ctlhi; ++ if (direction == DMA_TO_DEVICE) { ++ lli->sar = req->sg[j].dma_address + offset; ++ lli->dar = req->data_reg; ++ } else { ++ lli->sar = req->data_reg; ++ lli->dar = req->sg[j].dma_address + offset; ++ } ++ lli_prev = lli; ++ ++ offset += block_size; ++ if (offset > req->sg[j].length) { ++ j++; ++ offset = 0; ++ } ++ } ++ ++ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n", ++ i - 1, chan->block[i - 1].lli_vaddr, ++ chan->block[i - 1].lli_dma_addr, lli_prev->sar, ++ lli_prev->dar, lli_prev->llp, ++ lli_prev->ctllo, lli_prev->ctlhi); ++ ++ /* ++ * SAR, DAR and CTL are initialized from the LLI. We ++ * only have to enable the LLI bits in CTL. ++ */ ++ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0); ++ dmac_chan_writel_lo(dmac, req->req.channel, LLP, ++ chan->block[0].lli_dma_addr); ++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27); ++ } ++ ++ set_channel_bit(dmac, MASK_XFER, req->req.channel); ++ set_channel_bit(dmac, MASK_ERROR, req->req.channel); ++ if (req->req.block_complete) ++ set_channel_bit(dmac, MASK_BLOCK, req->req.channel); ++ else ++ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel); ++ ++ return 0; ++ ++out_unclaim_channel: ++ chan->state = CH_STATE_ALLOCATED; ++ return ret; ++} ++ ++static int dmac_prepare_request_cyclic(struct dma_controller *_dmac, ++ struct dma_request_cyclic *req) ++{ ++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); ++ struct dw_dma_channel *chan; ++ unsigned long ctlhi, ctllo, cfghi, cfglo; ++ unsigned long block_size; ++ int ret, i, direction; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&dmac->lock, flags); ++ ++ block_size = (req->buffer_size/req->periods) >> req->width; ++ ++ ret = -EINVAL; ++ if (req->req.channel >= DMAC_NR_CHANNELS ++ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED ++ || (req->periods == 0) ++ || block_size > DMAC_MAX_BLOCKSIZE) { ++ spin_unlock_irqrestore(&dmac->lock, flags); ++ return -EINVAL; ++ } ++ ++ chan = &dmac->channel[req->req.channel]; ++ chan->state = CH_STATE_BUSY; ++ chan->is_cyclic = 1; ++ chan->req_cyclic = req; ++ ++ /* ++ * We have marked the channel as busy, so no need to keep the ++ * lock as long as we only touch the channel-specific ++ * registers ++ */ ++ spin_unlock_irqrestore(&dmac->lock, flags); ++ ++ /* ++ Setup ++ */ ++ BUG_ON(req->buffer_size % req->periods); ++ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */ ++ ++ chan->nr_blocks = req->periods; ++ ++ ret = -EINVAL; ++ cfglo = cfghi = 0; ++ switch (req->direction) { ++ case DMA_DIR_MEM_TO_PERIPH: ++ direction = DMA_TO_DEVICE; ++ cfghi = req->periph_id << (43 - 32); ++ break; ++ ++ case DMA_DIR_PERIPH_TO_MEM: ++ direction = DMA_FROM_DEVICE; ++ cfghi = req->periph_id << (39 - 32); ++ break; ++ default: ++ goto out_unclaim_channel; ++ } ++ ++ chan->direction = direction; ++ ++ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi); ++ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo); ++ ++ ctlhi = block_size; ++ ctllo = ((req->direction << 20) ++ | (req->width << 4) | (req->width << 1) ++ | (1 << 0)); // interrupt enable ++ ++ { ++ struct dw_dma_lli *lli = NULL, *lli_prev = NULL; ++ ++ ret = -ENOMEM; ++ chan->block = allocate_blocks(dmac, req->periods); ++ if (!chan->block) ++ goto out_unclaim_channel; ++ ++ if (direction == DMA_TO_DEVICE) ++ ctllo |= 1 << 28 | 1 << 27 | 2 << 7; ++ else ++ ctllo |= 1 << 28 | 1 << 27 | 2 << 9; ++ ++ /* ++ * Set up a linked list items where each period gets ++ * an item. The linked list item for the last period ++ * points back to the star of the buffer making a ++ * cyclic buffer. ++ */ ++ for (i = 0; i < req->periods; i++) { ++ lli = chan->block[i].lli_vaddr; ++ if (lli_prev) { ++ lli_prev->llp = chan->block[i].lli_dma_addr; ++ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n", ++ i - 1, chan->block[i - 1].lli_vaddr, ++ chan->block[i - 1].lli_dma_addr, ++ lli_prev->sar, lli_prev->dar, lli_prev->llp, ++ lli_prev->ctllo, lli_prev->ctlhi);*/ ++ } ++ lli->llp = 0; ++ lli->ctllo = ctllo; ++ lli->ctlhi = ctlhi; ++ if (direction == DMA_TO_DEVICE) { ++ lli->sar = req->buffer_start + i*(block_size << req->width); ++ lli->dar = req->data_reg; ++ } else { ++ lli->sar = req->data_reg; ++ lli->dar = req->buffer_start + i*(block_size << req->width); ++ } ++ lli_prev = lli; ++ } ++ lli->llp = chan->block[0].lli_dma_addr; ++ ++ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n", ++ i - 1, chan->block[i - 1].lli_vaddr, ++ chan->block[i - 1].lli_dma_addr, lli_prev->sar, ++ lli_prev->dar, lli_prev->llp, ++ lli_prev->ctllo, lli_prev->ctlhi); */ ++ ++ /* ++ * SAR, DAR and CTL are initialized from the LLI. We ++ * only have to enable the LLI bits in CTL. ++ */ ++ dmac_chan_writel_lo(dmac, req->req.channel, LLP, ++ chan->block[0].lli_dma_addr); ++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27); ++ } ++ ++ clear_channel_bit(dmac, MASK_XFER, req->req.channel); ++ set_channel_bit(dmac, MASK_ERROR, req->req.channel); ++ if (req->req.block_complete) ++ set_channel_bit(dmac, MASK_BLOCK, req->req.channel); ++ else ++ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel); ++ ++ return 0; ++ ++out_unclaim_channel: ++ chan->state = CH_STATE_ALLOCATED; ++ return ret; ++} ++ ++static int dmac_start_request(struct dma_controller *_dmac, ++ unsigned int channel) ++{ ++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); ++ ++ BUG_ON(channel >= DMAC_NR_CHANNELS); ++ ++ set_channel_bit(dmac, CH_EN, channel); ++ ++ return 0; ++} ++ ++static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac, ++ unsigned int channel) ++{ ++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); ++ struct dw_dma_channel *chan; ++ dma_addr_t current_pos; ++ ++ BUG_ON(channel >= DMAC_NR_CHANNELS); ++ ++ chan = &dmac->channel[channel]; ++ ++ switch (chan->direction) { ++ case DMA_TO_DEVICE: ++ current_pos = dmac_chan_readl_lo(dmac, channel, SAR); ++ break; ++ case DMA_FROM_DEVICE: ++ current_pos = dmac_chan_readl_lo(dmac, channel, DAR); ++ break; ++ default: ++ return 0; ++ } ++ ++ ++ if (!current_pos) { ++ if (chan->is_cyclic) { ++ current_pos = chan->req_cyclic->buffer_start; ++ } else { ++ current_pos = chan->req_sg->sg->dma_address; ++ } ++ } ++ ++ return current_pos; ++} ++ ++ ++static int dmac_stop_request(struct dma_controller *_dmac, ++ unsigned int channel) ++{ ++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac); ++ struct dw_dma_channel *chan; ++ ++ BUG_ON(channel >= DMAC_NR_CHANNELS); ++ ++ chan = &dmac->channel[channel]; ++ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n", ++ chan->state, dmac_chan_readl_lo(dmac, channel, SAR), ++ dmac_chan_readl_lo(dmac, channel, DAR), ++ dmac_chan_readl_lo(dmac, channel, LLP), ++ dmac_chan_readl_hi(dmac, channel, CTL), ++ dmac_chan_readl_lo(dmac, channel, CTL)); ++ ++ if (chan->state == CH_STATE_BUSY) { ++ clear_channel_bit(dmac, CH_EN, channel); ++ cleanup_channel(dmac, &dmac->channel[channel]); ++ } ++ ++ return 0; ++} ++ ++ ++static void dmac_block_complete(struct dw_dma_controller *dmac) ++{ ++ struct dw_dma_channel *chan; ++ unsigned long status, chanid; ++ ++ status = dmac_readl_lo(dmac, STATUS_BLOCK); ++ ++ while (status) { ++ struct dma_request *req; ++ chanid = __ffs(status); ++ chan = &dmac->channel[chanid]; ++ ++ if (chan->is_cyclic) { ++ BUG_ON(!chan->req_cyclic ++ || !chan->req_cyclic->req.block_complete); ++ req = &chan->req_cyclic->req; ++ } else { ++ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete); ++ req = &chan->req_sg->req; ++ } ++ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid); ++ req->block_complete(req); ++ status = dmac_readl_lo(dmac, STATUS_BLOCK); ++ } ++} ++ ++static void dmac_xfer_complete(struct dw_dma_controller *dmac) ++{ ++ struct dw_dma_channel *chan; ++ struct dma_request *req; ++ unsigned long status, chanid; ++ ++ status = dmac_readl_lo(dmac, STATUS_XFER); ++ ++ while (status) { ++ chanid = __ffs(status); ++ chan = &dmac->channel[chanid]; ++ ++ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid); ++ ++ req = &chan->req_sg->req; ++ BUG_ON(!req); ++ cleanup_channel(dmac, chan); ++ if (req->xfer_complete) ++ req->xfer_complete(req); ++ ++ status = dmac_readl_lo(dmac, STATUS_XFER); ++ } ++} ++ ++static void dmac_error(struct dw_dma_controller *dmac) ++{ ++ struct dw_dma_channel *chan; ++ unsigned long status, chanid; ++ ++ status = dmac_readl_lo(dmac, STATUS_ERROR); ++ ++ while (status) { ++ struct dma_request *req; ++ ++ chanid = __ffs(status); ++ chan = &dmac->channel[chanid]; ++ ++ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid); ++ clear_channel_bit(dmac, CH_EN, chanid); ++ ++ if (chan->is_cyclic) { ++ BUG_ON(!chan->req_cyclic); ++ req = &chan->req_cyclic->req; ++ } else { ++ BUG_ON(!chan->req_sg); ++ req = &chan->req_sg->req; ++ } ++ ++ cleanup_channel(dmac, chan); ++ if (req->error) ++ req->error(req); ++ ++ status = dmac_readl_lo(dmac, STATUS_XFER); ++ } ++} ++ ++static irqreturn_t dmac_interrupt(int irq, void *dev_id) ++{ ++ struct dw_dma_controller *dmac = dev_id; ++ unsigned long status; ++ int ret = IRQ_NONE; ++ ++ spin_lock(&dmac->lock); ++ ++ status = dmac_readl_lo(dmac, STATUS_INT); ++ ++ while (status) { ++ ret = IRQ_HANDLED; ++ if (status & 0x10) ++ dmac_error(dmac); ++ if (status & 0x02) ++ dmac_block_complete(dmac); ++ if (status & 0x01) ++ dmac_xfer_complete(dmac); ++ ++ status = dmac_readl_lo(dmac, STATUS_INT); ++ } ++ ++ spin_unlock(&dmac->lock); ++ return ret; ++} ++ ++static int __devinit dmac_probe(struct platform_device *pdev) ++{ ++ struct dw_dma_controller *dmac; ++ struct resource *regs; ++ int ret; ++ ++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!regs) ++ return -ENXIO; ++ ++ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL); ++ if (!dmac) ++ return -ENOMEM; ++ memset(dmac, 0, sizeof(*dmac)); ++ ++ dmac->hclk = clk_get(&pdev->dev, "hclk"); ++ if (IS_ERR(dmac->hclk)) { ++ ret = PTR_ERR(dmac->hclk); ++ goto out_free_dmac; ++ } ++ clk_enable(dmac->hclk); ++ ++ ret = -ENOMEM; ++ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev, ++ sizeof(struct dw_dma_lli), 4, 0); ++ if (!dmac->lli_pool) ++ goto out_disable_clk; ++ ++ spin_lock_init(&dmac->lock); ++ dmac->dma.dev = &pdev->dev; ++ dmac->dma.alloc_channel = dmac_alloc_channel; ++ dmac->dma.release_channel = dmac_release_channel; ++ dmac->dma.prepare_request_sg = dmac_prepare_request_sg; ++ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic; ++ dmac->dma.start_request = dmac_start_request; ++ dmac->dma.stop_request = dmac_stop_request; ++ dmac->dma.get_current_pos = dmac_get_current_pos; ++ ++ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1); ++ if (!dmac->regs) ++ goto out_free_pool; ++ ++ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt, ++ SA_SAMPLE_RANDOM, pdev->name, dmac); ++ if (ret) ++ goto out_unmap_regs; ++ ++ /* Enable the DMA controller */ ++ dmac_writel_lo(dmac, CFG, 1); ++ ++ register_dma_controller(&dmac->dma); ++ ++ printk(KERN_INFO ++ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n", ++ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0)); ++ ++ return 0; ++ ++out_unmap_regs: ++ iounmap(dmac->regs); ++out_free_pool: ++ dma_pool_destroy(dmac->lli_pool); ++out_disable_clk: ++ clk_disable(dmac->hclk); ++ clk_put(dmac->hclk); ++out_free_dmac: ++ kfree(dmac); ++ return ret; ++} ++ ++static struct platform_driver dmac_driver = { ++ .probe = dmac_probe, ++ .driver = { ++ .name = "dmaca", ++ }, ++}; ++ ++static int __init dmac_init(void) ++{ ++ return platform_driver_register(&dmac_driver); ++} ++subsys_initcall(dmac_init); ++ ++static void __exit dmac_exit(void) ++{ ++ platform_driver_unregister(&dmac_driver); ++} ++module_exit(dmac_exit); ++ ++MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver"); ++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); ++MODULE_LICENSE("GPL"); +diff --git a/arch/avr32/drivers/dw-dmac.h b/arch/avr32/drivers/dw-dmac.h +new file mode 100644 +index 0000000..1f67921 +--- /dev/null ++++ b/arch/avr32/drivers/dw-dmac.h +@@ -0,0 +1,42 @@ ++/* ++ * Driver for the Synopsys DesignWare DMA Controller ++ * ++ * Copyright (C) 2005-2006 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#ifndef __AVR32_DW_DMAC_H__ ++#define __AVR32_DW_DMAC_H__ ++ ++#define DW_DMAC_CFG 0x398 ++#define DW_DMAC_CH_EN 0x3a0 ++ ++#define DW_DMAC_STATUS_XFER 0x2e8 ++#define DW_DMAC_STATUS_BLOCK 0x2f0 ++#define DW_DMAC_STATUS_ERROR 0x308 ++ ++#define DW_DMAC_MASK_XFER 0x310 ++#define DW_DMAC_MASK_BLOCK 0x318 ++#define DW_DMAC_MASK_ERROR 0x330 ++ ++#define DW_DMAC_CLEAR_XFER 0x338 ++#define DW_DMAC_CLEAR_BLOCK 0x340 ++#define DW_DMAC_CLEAR_ERROR 0x358 ++ ++#define DW_DMAC_STATUS_INT 0x360 ++ ++#define DW_DMAC_CHAN_SAR 0x000 ++#define DW_DMAC_CHAN_DAR 0x008 ++#define DW_DMAC_CHAN_LLP 0x010 ++#define DW_DMAC_CHAN_CTL 0x018 ++#define DW_DMAC_CHAN_SSTAT 0x020 ++#define DW_DMAC_CHAN_DSTAT 0x028 ++#define DW_DMAC_CHAN_SSTATAR 0x030 ++#define DW_DMAC_CHAN_DSTATAR 0x038 ++#define DW_DMAC_CHAN_CFG 0x040 ++#define DW_DMAC_CHAN_SGR 0x048 ++#define DW_DMAC_CHAN_DSR 0x050 ++ ++#endif /* __AVR32_DW_DMAC_H__ */ +diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile +index 90e5aff..b6afc0c 100644 +--- a/arch/avr32/kernel/Makefile ++++ b/arch/avr32/kernel/Makefile +@@ -9,6 +9,7 @@ obj-y += syscall_table.o syscall-stubs.o irq.o + obj-y += setup.o traps.o semaphore.o ptrace.o + obj-y += signal.o sys_avr32.o process.o time.o + obj-y += init_task.o switch_to.o cpu.o ++obj-y += dma-controller.o + obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o + obj-$(CONFIG_KPROBES) += kprobes.o + +diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c +index 2e72fd2..2714cf6 100644 +--- a/arch/avr32/kernel/cpu.c ++++ b/arch/avr32/kernel/cpu.c +@@ -209,16 +209,17 @@ static const char *mmu_types[] = { + void __init setup_processor(void) + { + unsigned long config0, config1; ++ unsigned long features; + unsigned cpu_id, cpu_rev, arch_id, arch_rev, mmu_type; + unsigned tmp; + +- config0 = sysreg_read(CONFIG0); /* 0x0000013e; */ +- config1 = sysreg_read(CONFIG1); /* 0x01f689a2; */ +- cpu_id = config0 >> 24; +- cpu_rev = (config0 >> 16) & 0xff; +- arch_id = (config0 >> 13) & 0x07; +- arch_rev = (config0 >> 10) & 0x07; +- mmu_type = (config0 >> 7) & 0x03; ++ config0 = sysreg_read(CONFIG0); ++ config1 = sysreg_read(CONFIG1); ++ cpu_id = SYSREG_BFEXT(PROCESSORID, config0); ++ cpu_rev = SYSREG_BFEXT(PROCESSORREVISION, config0); ++ arch_id = SYSREG_BFEXT(AT, config0); ++ arch_rev = SYSREG_BFEXT(AR, config0); ++ mmu_type = SYSREG_BFEXT(MMUT, config0); + + boot_cpu_data.arch_type = arch_id; + boot_cpu_data.cpu_type = cpu_id; +@@ -226,16 +227,16 @@ void __init setup_processor(void) + boot_cpu_data.cpu_revision = cpu_rev; + boot_cpu_data.tlb_config = mmu_type; + +- tmp = (config1 >> 13) & 0x07; ++ tmp = SYSREG_BFEXT(ILSZ, config1); + if (tmp) { +- boot_cpu_data.icache.ways = 1 << ((config1 >> 10) & 0x07); +- boot_cpu_data.icache.sets = 1 << ((config1 >> 16) & 0x0f); ++ boot_cpu_data.icache.ways = 1 << SYSREG_BFEXT(IASS, config1); ++ boot_cpu_data.icache.sets = 1 << SYSREG_BFEXT(ISET, config1); + boot_cpu_data.icache.linesz = 1 << (tmp + 1); + } +- tmp = (config1 >> 3) & 0x07; ++ tmp = SYSREG_BFEXT(DLSZ, config1); + if (tmp) { +- boot_cpu_data.dcache.ways = 1 << (config1 & 0x07); +- boot_cpu_data.dcache.sets = 1 << ((config1 >> 6) & 0x0f); ++ boot_cpu_data.dcache.ways = 1 << SYSREG_BFEXT(DASS, config1); ++ boot_cpu_data.dcache.sets = 1 << SYSREG_BFEXT(DSET, config1); + boot_cpu_data.dcache.linesz = 1 << (tmp + 1); + } + +@@ -250,16 +251,39 @@ void __init setup_processor(void) + cpu_names[cpu_id], cpu_id, cpu_rev, + arch_names[arch_id], arch_rev); + printk ("CPU: MMU configuration: %s\n", mmu_types[mmu_type]); ++ + printk ("CPU: features:"); +- if (config0 & (1 << 6)) +- printk(" fpu"); +- if (config0 & (1 << 5)) +- printk(" java"); +- if (config0 & (1 << 4)) +- printk(" perfctr"); +- if (config0 & (1 << 3)) ++ features = 0; ++ if (config0 & SYSREG_BIT(CONFIG0_R)) { ++ features |= AVR32_FEATURE_RMW; ++ printk(" rmw"); ++ } ++ if (config0 & SYSREG_BIT(CONFIG0_D)) { ++ features |= AVR32_FEATURE_DSP; ++ printk(" dsp"); ++ } ++ if (config0 & SYSREG_BIT(CONFIG0_S)) { ++ features |= AVR32_FEATURE_SIMD; ++ printk(" simd"); ++ } ++ if (config0 & SYSREG_BIT(CONFIG0_O)) { ++ features |= AVR32_FEATURE_OCD; + printk(" ocd"); ++ } ++ if (config0 & SYSREG_BIT(CONFIG0_P)) { ++ features |= AVR32_FEATURE_PCTR; ++ printk(" perfctr"); ++ } ++ if (config0 & SYSREG_BIT(CONFIG0_J)) { ++ features |= AVR32_FEATURE_JAVA; ++ printk(" java"); ++ } ++ if (config0 & SYSREG_BIT(CONFIG0_F)) { ++ features |= AVR32_FEATURE_FPU; ++ printk(" fpu"); ++ } + printk("\n"); ++ boot_cpu_data.features = features; + } + + #ifdef CONFIG_PROC_FS +diff --git a/arch/avr32/kernel/dma-controller.c b/arch/avr32/kernel/dma-controller.c +new file mode 100644 +index 0000000..fb654b3 +--- /dev/null ++++ b/arch/avr32/kernel/dma-controller.c +@@ -0,0 +1,34 @@ ++/* ++ * Preliminary DMA controller framework for AVR32 ++ * ++ * Copyright (C) 2005-2006 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#include <asm/dma-controller.h> ++ ++static LIST_HEAD(controllers); ++ ++int register_dma_controller(struct dma_controller *dmac) ++{ ++ static int next_id; ++ ++ dmac->id = next_id++; ++ list_add_tail(&dmac->list, &controllers); ++ ++ return 0; ++} ++EXPORT_SYMBOL(register_dma_controller); ++ ++struct dma_controller *find_dma_controller(int id) ++{ ++ struct dma_controller *dmac; ++ ++ list_for_each_entry(dmac, &controllers, list) ++ if (dmac->id == id) ++ return dmac; ++ return NULL; ++} ++EXPORT_SYMBOL(find_dma_controller); +diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S +index eeb6679..42657f1 100644 +--- a/arch/avr32/kernel/entry-avr32b.S ++++ b/arch/avr32/kernel/entry-avr32b.S +@@ -100,55 +100,49 @@ dtlb_miss_write: + + .global tlb_miss_common + tlb_miss_common: +- mfsr r0, SYSREG_PTBR +- mfsr r1, SYSREG_TLBEAR ++ mfsr r0, SYSREG_TLBEAR ++ mfsr r1, SYSREG_PTBR + + /* Is it the vmalloc space? */ +- bld r1, 31 ++ bld r0, 31 + brcs handle_vmalloc_miss + + /* First level lookup */ + pgtbl_lookup: +- lsr r2, r1, PGDIR_SHIFT +- ld.w r0, r0[r2 << 2] +- bld r0, _PAGE_BIT_PRESENT ++ lsr r2, r0, PGDIR_SHIFT ++ ld.w r3, r1[r2 << 2] ++ bfextu r1, r0, PAGE_SHIFT, PGDIR_SHIFT - PAGE_SHIFT ++ bld r3, _PAGE_BIT_PRESENT + brcc page_table_not_present + +- /* TODO: Check access rights on page table if necessary */ +- + /* Translate to virtual address in P1. */ +- andl r0, 0xf000 +- sbr r0, 31 ++ andl r3, 0xf000 ++ sbr r3, 31 + + /* Second level lookup */ +- lsl r1, (32 - PGDIR_SHIFT) +- lsr r1, (32 - PGDIR_SHIFT) + PAGE_SHIFT +- add r2, r0, r1 << 2 +- ld.w r1, r2[0] +- bld r1, _PAGE_BIT_PRESENT ++ ld.w r2, r3[r1 << 2] ++ mfsr r0, SYSREG_TLBARLO ++ bld r2, _PAGE_BIT_PRESENT + brcc page_not_present + + /* Mark the page as accessed */ +- sbr r1, _PAGE_BIT_ACCESSED +- st.w r2[0], r1 ++ sbr r2, _PAGE_BIT_ACCESSED ++ st.w r3[r1 << 2], r2 + + /* Drop software flags */ +- andl r1, _PAGE_FLAGS_HARDWARE_MASK & 0xffff +- mtsr SYSREG_TLBELO, r1 ++ andl r2, _PAGE_FLAGS_HARDWARE_MASK & 0xffff ++ mtsr SYSREG_TLBELO, r2 + + /* Figure out which entry we want to replace */ +- mfsr r0, SYSREG_TLBARLO ++ mfsr r1, SYSREG_MMUCR + clz r2, r0 + brcc 1f +- mov r1, -1 /* All entries have been accessed, */ +- mtsr SYSREG_TLBARLO, r1 /* so reset TLBAR */ +- mov r2, 0 /* and start at 0 */ +-1: mfsr r1, SYSREG_MMUCR +- lsl r2, 14 +- andl r1, 0x3fff, COH +- or r1, r2 +- mtsr SYSREG_MMUCR, r1 ++ mov r3, -1 /* All entries have been accessed, */ ++ mov r2, 0 /* so start at 0 */ ++ mtsr SYSREG_TLBARLO, r3 /* and reset TLBAR */ + ++1: bfins r1, r2, SYSREG_DRP_OFFSET, SYSREG_DRP_SIZE ++ mtsr SYSREG_MMUCR, r1 + tlbw + + tlbmiss_restore +@@ -156,8 +150,8 @@ pgtbl_lookup: + + handle_vmalloc_miss: + /* Simply do the lookup in init's page table */ +- mov r0, lo(swapper_pg_dir) +- orh r0, hi(swapper_pg_dir) ++ mov r1, lo(swapper_pg_dir) ++ orh r1, hi(swapper_pg_dir) + rjmp pgtbl_lookup + + +@@ -340,12 +334,34 @@ do_bus_error_read: + do_nmi_ll: + sub sp, 4 + stmts --sp, r0-lr +- /* FIXME: Make sure RAR_NMI and RSR_NMI are pushed instead of *_EX */ +- rcall save_full_context_ex ++ mfsr r9, SYSREG_RSR_NMI ++ mfsr r8, SYSREG_RAR_NMI ++ bfextu r0, r9, MODE_SHIFT, 3 ++ brne 2f ++ ++1: pushm r8, r9 /* PC and SR */ + mfsr r12, SYSREG_ECR + mov r11, sp + rcall do_nmi +- rjmp bad_return ++ popm r8-r9 ++ mtsr SYSREG_RAR_NMI, r8 ++ tst r0, r0 ++ mtsr SYSREG_RSR_NMI, r9 ++ brne 3f ++ ++ ldmts sp++, r0-lr ++ sub sp, -4 /* skip r12_orig */ ++ rete ++ ++2: sub r10, sp, -(FRAME_SIZE_FULL - REG_LR) ++ stdsp sp[4], r10 /* replace saved SP */ ++ rjmp 1b ++ ++3: popm lr ++ sub sp, -4 /* skip sp */ ++ popm r0-r12 ++ sub sp, -4 /* skip r12_orig */ ++ rete + + handle_address_fault: + sub sp, 4 +@@ -630,9 +646,12 @@ irq_level\level: + rcall do_IRQ + + lddsp r4, sp[REG_SR] +- andh r4, (MODE_MASK >> 16), COH ++ bfextu r4, r4, SYSREG_M0_OFFSET, 3 ++ cp.w r4, MODE_SUPERVISOR >> SYSREG_M0_OFFSET ++ breq 2f ++ cp.w r4, MODE_USER >> SYSREG_M0_OFFSET + #ifdef CONFIG_PREEMPT +- brne 2f ++ brne 3f + #else + brne 1f + #endif +@@ -649,9 +668,18 @@ irq_level\level: + sub sp, -4 /* ignore r12_orig */ + rete + ++2: get_thread_info r0 ++ ld.w r1, r0[TI_flags] ++ bld r1, TIF_CPU_GOING_TO_SLEEP + #ifdef CONFIG_PREEMPT +-2: +- get_thread_info r0 ++ brcc 3f ++#else ++ brcc 1b ++#endif ++ sub r1, pc, . - cpu_idle_skip_sleep ++ stdsp sp[REG_PC], r1 ++#ifdef CONFIG_PREEMPT ++3: get_thread_info r0 + ld.w r2, r0[TI_preempt_count] + cp.w r2, 0 + brne 1b +@@ -662,12 +690,32 @@ irq_level\level: + bld r4, SYSREG_GM_OFFSET + brcs 1b + rcall preempt_schedule_irq +- rjmp 1b + #endif ++ rjmp 1b + .endm + + .section .irq.text,"ax",@progbits + ++.global cpu_idle_sleep ++cpu_idle_sleep: ++ mask_interrupts ++ get_thread_info r8 ++ ld.w r9, r8[TI_flags] ++ bld r9, TIF_NEED_RESCHED ++ brcs cpu_idle_enable_int_and_exit ++ sbr r9, TIF_CPU_GOING_TO_SLEEP ++ st.w r8[TI_flags], r9 ++ unmask_interrupts ++ sleep 0 ++cpu_idle_skip_sleep: ++ mask_interrupts ++ ld.w r9, r8[TI_flags] ++ cbr r9, TIF_CPU_GOING_TO_SLEEP ++ st.w r8[TI_flags], r9 ++cpu_idle_enable_int_and_exit: ++ unmask_interrupts ++ retal r12 ++ + .global irq_level0 + .global irq_level1 + .global irq_level2 +diff --git a/arch/avr32/kernel/irq.c b/arch/avr32/kernel/irq.c +index fd31124..61f2de2 100644 +--- a/arch/avr32/kernel/irq.c ++++ b/arch/avr32/kernel/irq.c +@@ -7,15 +7,6 @@ + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +- * +- * This file contains the code used by various IRQ handling routines: +- * asking for different IRQ's should be done through these routines +- * instead of just grabbing them. Thus setups with different IRQ numbers +- * shouldn't result in any weird surprises, and installing new handlers +- * should be easier. +- * +- * IRQ's are in fact implemented a bit like signal handlers for the kernel. +- * Naturally it's not a 1:1 relation, but there are similarities. + */ + + #include <linux/interrupt.h> +diff --git a/arch/avr32/kernel/kprobes.c b/arch/avr32/kernel/kprobes.c +index d0abbca..037d7bd 100644 +--- a/arch/avr32/kernel/kprobes.c ++++ b/arch/avr32/kernel/kprobes.c +@@ -179,7 +179,7 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs) + return 1; + } + +-static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) ++int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) + { + struct kprobe *cur = kprobe_running(); + +@@ -216,11 +216,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + if (post_kprobe_handler(args->regs)) + ret = NOTIFY_STOP; + break; +- case DIE_FAULT: +- if (kprobe_running() +- && kprobe_fault_handler(args->regs, args->trapnr)) +- ret = NOTIFY_STOP; +- break; + default: + break; + } +diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c +index b599eae..1167fe9 100644 +--- a/arch/avr32/kernel/module.c ++++ b/arch/avr32/kernel/module.c +@@ -12,10 +12,11 @@ + * published by the Free Software Foundation. + */ + +-#include <linux/moduleloader.h> +-#include <linux/module.h> +-#include <linux/kernel.h> ++#include <linux/bug.h> + #include <linux/elf.h> ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/moduleloader.h> + #include <linux/vmalloc.h> + + void *module_alloc(unsigned long size) +@@ -315,10 +316,10 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, + vfree(module->arch.syminfo); + module->arch.syminfo = NULL; + +- return 0; ++ return module_bug_finalize(hdr, sechdrs, module); + } + + void module_arch_cleanup(struct module *module) + { +- ++ module_bug_cleanup(module); + } +diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c +index 0b43259..4e4181e 100644 +--- a/arch/avr32/kernel/process.c ++++ b/arch/avr32/kernel/process.c +@@ -11,6 +11,7 @@ + #include <linux/fs.h> + #include <linux/ptrace.h> + #include <linux/reboot.h> ++#include <linux/uaccess.h> + #include <linux/unistd.h> + + #include <asm/sysreg.h> +@@ -19,6 +20,8 @@ + void (*pm_power_off)(void) = NULL; + EXPORT_SYMBOL(pm_power_off); + ++extern void cpu_idle_sleep(void); ++ + /* + * This file handles the architecture-dependent parts of process handling.. + */ +@@ -27,9 +30,8 @@ void cpu_idle(void) + { + /* endless idle loop with no priority at all */ + while (1) { +- /* TODO: Enter sleep mode */ + while (!need_resched()) +- cpu_relax(); ++ cpu_idle_sleep(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); +@@ -114,39 +116,178 @@ void release_thread(struct task_struct *dead_task) + /* do nothing */ + } + ++static void dump_mem(const char *str, const char *log_lvl, ++ unsigned long bottom, unsigned long top) ++{ ++ unsigned long p; ++ int i; ++ ++ printk("%s%s(0x%08lx to 0x%08lx)\n", log_lvl, str, bottom, top); ++ ++ for (p = bottom & ~31; p < top; ) { ++ printk("%s%04lx: ", log_lvl, p & 0xffff); ++ ++ for (i = 0; i < 8; i++, p += 4) { ++ unsigned int val; ++ ++ if (p < bottom || p >= top) ++ printk(" "); ++ else { ++ if (__get_user(val, (unsigned int __user *)p)) { ++ printk("\n"); ++ goto out; ++ } ++ printk("%08x ", val); ++ } ++ } ++ printk("\n"); ++ } ++ ++out: ++ return; ++} ++ ++static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p) ++{ ++ return (p > (unsigned long)tinfo) ++ && (p < (unsigned long)tinfo + THREAD_SIZE - 3); ++} ++ ++#ifdef CONFIG_FRAME_POINTER ++static void show_trace_log_lvl(struct task_struct *tsk, unsigned long *sp, ++ struct pt_regs *regs, const char *log_lvl) ++{ ++ unsigned long lr, fp; ++ struct thread_info *tinfo; ++ ++ if (regs) ++ fp = regs->r7; ++ else if (tsk == current) ++ asm("mov %0, r7" : "=r"(fp)); ++ else ++ fp = tsk->thread.cpu_context.r7; ++ ++ /* ++ * Walk the stack as long as the frame pointer (a) is within ++ * the kernel stack of the task, and (b) it doesn't move ++ * downwards. ++ */ ++ tinfo = task_thread_info(tsk); ++ printk("%sCall trace:\n", log_lvl); ++ while (valid_stack_ptr(tinfo, fp)) { ++ unsigned long new_fp; ++ ++ lr = *(unsigned long *)fp; ++#ifdef CONFIG_KALLSYMS ++ printk("%s [<%08lx>] ", log_lvl, lr); ++#else ++ printk(" [<%08lx>] ", lr); ++#endif ++ print_symbol("%s\n", lr); ++ ++ new_fp = *(unsigned long *)(fp + 4); ++ if (new_fp <= fp) ++ break; ++ fp = new_fp; ++ } ++ printk("\n"); ++} ++#else ++static void show_trace_log_lvl(struct task_struct *tsk, unsigned long *sp, ++ struct pt_regs *regs, const char *log_lvl) ++{ ++ unsigned long addr; ++ ++ printk("%sCall trace:\n", log_lvl); ++ ++ while (!kstack_end(sp)) { ++ addr = *sp++; ++ if (kernel_text_address(addr)) { ++#ifdef CONFIG_KALLSYMS ++ printk("%s [<%08lx>] ", log_lvl, addr); ++#else ++ printk(" [<%08lx>] ", addr); ++#endif ++ print_symbol("%s\n", addr); ++ } ++ } ++ printk("\n"); ++} ++#endif ++ ++void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp, ++ struct pt_regs *regs, const char *log_lvl) ++{ ++ struct thread_info *tinfo; ++ ++ if (sp == 0) { ++ if (tsk) ++ sp = tsk->thread.cpu_context.ksp; ++ else ++ sp = (unsigned long)&tinfo; ++ } ++ if (!tsk) ++ tsk = current; ++ ++ tinfo = task_thread_info(tsk); ++ ++ if (valid_stack_ptr(tinfo, sp)) { ++ dump_mem("Stack: ", log_lvl, sp, ++ THREAD_SIZE + (unsigned long)tinfo); ++ show_trace_log_lvl(tsk, (unsigned long *)sp, regs, log_lvl); ++ } ++} ++ ++void show_stack(struct task_struct *tsk, unsigned long *stack) ++{ ++ show_stack_log_lvl(tsk, (unsigned long)stack, NULL, ""); ++} ++ ++void dump_stack(void) ++{ ++ unsigned long stack; ++ ++ show_trace_log_lvl(current, &stack, NULL, ""); ++} ++EXPORT_SYMBOL(dump_stack); ++ + static const char *cpu_modes[] = { + "Application", "Supervisor", "Interrupt level 0", "Interrupt level 1", + "Interrupt level 2", "Interrupt level 3", "Exception", "NMI" + }; + +-void show_regs(struct pt_regs *regs) ++void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl) + { + unsigned long sp = regs->sp; + unsigned long lr = regs->lr; + unsigned long mode = (regs->sr & MODE_MASK) >> MODE_SHIFT; + +- if (!user_mode(regs)) ++ if (!user_mode(regs)) { + sp = (unsigned long)regs + FRAME_SIZE_FULL; + +- print_symbol("PC is at %s\n", instruction_pointer(regs)); +- print_symbol("LR is at %s\n", lr); +- printk("pc : [<%08lx>] lr : [<%08lx>] %s\n" +- "sp : %08lx r12: %08lx r11: %08lx\n", +- instruction_pointer(regs), +- lr, print_tainted(), sp, regs->r12, regs->r11); +- printk("r10: %08lx r9 : %08lx r8 : %08lx\n", +- regs->r10, regs->r9, regs->r8); +- printk("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n", +- regs->r7, regs->r6, regs->r5, regs->r4); +- printk("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n", +- regs->r3, regs->r2, regs->r1, regs->r0); +- printk("Flags: %c%c%c%c%c\n", ++ printk("%s", log_lvl); ++ print_symbol("PC is at %s\n", instruction_pointer(regs)); ++ printk("%s", log_lvl); ++ print_symbol("LR is at %s\n", lr); ++ } ++ ++ printk("%spc : [<%08lx>] lr : [<%08lx>] %s\n" ++ "%ssp : %08lx r12: %08lx r11: %08lx\n", ++ log_lvl, instruction_pointer(regs), lr, print_tainted(), ++ log_lvl, sp, regs->r12, regs->r11); ++ printk("%sr10: %08lx r9 : %08lx r8 : %08lx\n", ++ log_lvl, regs->r10, regs->r9, regs->r8); ++ printk("%sr7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n", ++ log_lvl, regs->r7, regs->r6, regs->r5, regs->r4); ++ printk("%sr3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n", ++ log_lvl, regs->r3, regs->r2, regs->r1, regs->r0); ++ printk("%sFlags: %c%c%c%c%c\n", log_lvl, + regs->sr & SR_Q ? 'Q' : 'q', + regs->sr & SR_V ? 'V' : 'v', + regs->sr & SR_N ? 'N' : 'n', + regs->sr & SR_Z ? 'Z' : 'z', + regs->sr & SR_C ? 'C' : 'c'); +- printk("Mode bits: %c%c%c%c%c%c%c%c%c\n", ++ printk("%sMode bits: %c%c%c%c%c%c%c%c%c\n", log_lvl, + regs->sr & SR_H ? 'H' : 'h', + regs->sr & SR_R ? 'R' : 'r', + regs->sr & SR_J ? 'J' : 'j', +@@ -156,9 +297,21 @@ void show_regs(struct pt_regs *regs) + regs->sr & SR_I1M ? '1' : '.', + regs->sr & SR_I0M ? '0' : '.', + regs->sr & SR_GM ? 'G' : 'g'); +- printk("CPU Mode: %s\n", cpu_modes[mode]); ++ printk("%sCPU Mode: %s\n", log_lvl, cpu_modes[mode]); ++ printk("%sProcess: %s [%d] (task: %p thread: %p)\n", ++ log_lvl, current->comm, current->pid, current, ++ task_thread_info(current)); ++} ++ ++void show_regs(struct pt_regs *regs) ++{ ++ unsigned long sp = regs->sp; ++ ++ if (!user_mode(regs)) ++ sp = (unsigned long)regs + FRAME_SIZE_FULL; + +- show_trace(NULL, (unsigned long *)sp, regs); ++ show_regs_log_lvl(regs, ""); ++ show_trace_log_lvl(current, (unsigned long *)sp, regs, ""); + } + EXPORT_SYMBOL(show_regs); + +diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c +index a1a7c3c..b279d66 100644 +--- a/arch/avr32/kernel/setup.c ++++ b/arch/avr32/kernel/setup.c +@@ -8,12 +8,14 @@ + + #include <linux/clk.h> + #include <linux/init.h> ++#include <linux/initrd.h> + #include <linux/sched.h> + #include <linux/console.h> + #include <linux/ioport.h> + #include <linux/bootmem.h> + #include <linux/fs.h> + #include <linux/module.h> ++#include <linux/pfn.h> + #include <linux/root_dev.h> + #include <linux/cpu.h> + #include <linux/kernel.h> +@@ -30,13 +32,6 @@ + extern int root_mountflags; + + /* +- * Bootloader-provided information about physical memory +- */ +-struct tag_mem_range *mem_phys; +-struct tag_mem_range *mem_reserved; +-struct tag_mem_range *mem_ramdisk; +- +-/* + * Initialize loops_per_jiffy as 5000000 (500MIPS). + * Better make it too large than too small... + */ +@@ -48,48 +43,193 @@ EXPORT_SYMBOL(boot_cpu_data); + static char __initdata command_line[COMMAND_LINE_SIZE]; + + /* +- * Should be more than enough, but if you have a _really_ complex +- * setup, you might need to increase the size of this... ++ * Standard memory resources + */ +-static struct tag_mem_range __initdata mem_range_cache[32]; +-static unsigned mem_range_next_free; ++static struct resource __initdata kernel_data = { ++ .name = "Kernel data", ++ .start = 0, ++ .end = 0, ++ .flags = IORESOURCE_MEM, ++}; ++static struct resource __initdata kernel_code = { ++ .name = "Kernel code", ++ .start = 0, ++ .end = 0, ++ .flags = IORESOURCE_MEM, ++ .sibling = &kernel_data, ++}; + + /* +- * Standard memory resources ++ * Available system RAM and reserved regions as singly linked ++ * lists. These lists are traversed using the sibling pointer in ++ * struct resource and are kept sorted at all times. + */ +-static struct resource mem_res[] = { +- { +- .name = "Kernel code", +- .start = 0, +- .end = 0, +- .flags = IORESOURCE_MEM +- }, +- { +- .name = "Kernel data", +- .start = 0, +- .end = 0, +- .flags = IORESOURCE_MEM, +- }, +-}; ++static struct resource *__initdata system_ram; ++static struct resource *__initdata reserved = &kernel_code; ++ ++/* ++ * We need to allocate these before the bootmem allocator is up and ++ * running, so we need this "cache". 32 entries are probably enough ++ * for all but the most insanely complex systems. ++ */ ++static struct resource __initdata res_cache[32]; ++static unsigned int __initdata res_cache_next_free; ++ ++static void __init resource_init(void) ++{ ++ struct resource *mem, *res; ++ struct resource *new; ++ ++ kernel_code.start = __pa(init_mm.start_code); ++ ++ for (mem = system_ram; mem; mem = mem->sibling) { ++ new = alloc_bootmem_low(sizeof(struct resource)); ++ memcpy(new, mem, sizeof(struct resource)); ++ ++ new->sibling = NULL; ++ if (request_resource(&iomem_resource, new)) ++ printk(KERN_WARNING "Bad RAM resource %08x-%08x\n", ++ mem->start, mem->end); ++ } ++ ++ for (res = reserved; res; res = res->sibling) { ++ new = alloc_bootmem_low(sizeof(struct resource)); ++ memcpy(new, res, sizeof(struct resource)); ++ ++ new->sibling = NULL; ++ if (insert_resource(&iomem_resource, new)) ++ printk(KERN_WARNING ++ "Bad reserved resource %s (%08x-%08x)\n", ++ res->name, res->start, res->end); ++ } ++} ++ ++static void __init ++add_physical_memory(resource_size_t start, resource_size_t end) ++{ ++ struct resource *new, *next, **pprev; ++ ++ for (pprev = &system_ram, next = system_ram; next; ++ pprev = &next->sibling, next = next->sibling) { ++ if (end < next->start) ++ break; ++ if (start <= next->end) { ++ printk(KERN_WARNING ++ "Warning: Physical memory map is broken\n"); ++ printk(KERN_WARNING ++ "Warning: %08x-%08x overlaps %08x-%08x\n", ++ start, end, next->start, next->end); ++ return; ++ } ++ } ++ ++ if (res_cache_next_free >= ARRAY_SIZE(res_cache)) { ++ printk(KERN_WARNING ++ "Warning: Failed to add physical memory %08x-%08x\n", ++ start, end); ++ return; ++ } ++ ++ new = &res_cache[res_cache_next_free++]; ++ new->start = start; ++ new->end = end; ++ new->name = "System RAM"; ++ new->flags = IORESOURCE_MEM; ++ ++ *pprev = new; ++} ++ ++static int __init ++add_reserved_region(resource_size_t start, resource_size_t end, ++ const char *name) ++{ ++ struct resource *new, *next, **pprev; ++ ++ if (end < start) ++ return -EINVAL; ++ ++ if (res_cache_next_free >= ARRAY_SIZE(res_cache)) ++ return -ENOMEM; ++ ++ for (pprev = &reserved, next = reserved; next; ++ pprev = &next->sibling, next = next->sibling) { ++ if (end < next->start) ++ break; ++ if (start <= next->end) ++ return -EBUSY; ++ } ++ ++ new = &res_cache[res_cache_next_free++]; ++ new->start = start; ++ new->end = end; ++ new->name = name; ++ new->flags = IORESOURCE_MEM; ++ ++ *pprev = new; ++ ++ return 0; ++} ++ ++static unsigned long __init ++find_free_region(const struct resource *mem, resource_size_t size, ++ resource_size_t align) ++{ ++ struct resource *res; ++ unsigned long target; ++ ++ target = ALIGN(mem->start, align); ++ for (res = reserved; res; res = res->sibling) { ++ if ((target + size) <= res->start) ++ break; ++ if (target <= res->end) ++ target = ALIGN(res->end + 1, align); ++ } ++ ++ if ((target + size) > (mem->end + 1)) ++ return mem->end + 1; ++ ++ return target; ++} ++ ++static int __init ++alloc_reserved_region(resource_size_t *start, resource_size_t size, ++ resource_size_t align, const char *name) ++{ ++ struct resource *mem; ++ resource_size_t target; ++ int ret; ++ ++ for (mem = system_ram; mem; mem = mem->sibling) { ++ target = find_free_region(mem, size, align); ++ if (target <= mem->end) { ++ ret = add_reserved_region(target, target + size - 1, ++ name); ++ if (!ret) ++ *start = target; ++ return ret; ++ } ++ } + +-#define kernel_code mem_res[0] +-#define kernel_data mem_res[1] ++ return -ENOMEM; ++} + + /* + * Early framebuffer allocation. Works as follows: + * - If fbmem_size is zero, nothing will be allocated or reserved. + * - If fbmem_start is zero when setup_bootmem() is called, +- * fbmem_size bytes will be allocated from the bootmem allocator. ++ * a block of fbmem_size bytes will be reserved before bootmem ++ * initialization. It will be aligned to the largest page size ++ * that fbmem_size is a multiple of. + * - If fbmem_start is nonzero, an area of size fbmem_size will be +- * reserved at the physical address fbmem_start if necessary. If +- * the area isn't in a memory region known to the kernel, it will +- * be left alone. ++ * reserved at the physical address fbmem_start if possible. If ++ * it collides with other reserved memory, a different block of ++ * same size will be allocated, just as if fbmem_start was zero. + * + * Board-specific code may use these variables to set up platform data + * for the framebuffer driver if fbmem_size is nonzero. + */ +-static unsigned long __initdata fbmem_start; +-static unsigned long __initdata fbmem_size; ++resource_size_t __initdata fbmem_start; ++resource_size_t __initdata fbmem_size; + + /* + * "fbmem=xxx[kKmM]" allocates the specified amount of boot memory for +@@ -103,48 +243,42 @@ static unsigned long __initdata fbmem_size; + */ + static int __init early_parse_fbmem(char *p) + { ++ int ret; ++ unsigned long align; ++ + fbmem_size = memparse(p, &p); +- if (*p == '@') ++ if (*p == '@') { + fbmem_start = memparse(p, &p); +- return 0; +-} +-early_param("fbmem", early_parse_fbmem); +- +-static inline void __init resource_init(void) +-{ +- struct tag_mem_range *region; +- +- kernel_code.start = __pa(init_mm.start_code); +- kernel_code.end = __pa(init_mm.end_code - 1); +- kernel_data.start = __pa(init_mm.end_code); +- kernel_data.end = __pa(init_mm.brk - 1); +- +- for (region = mem_phys; region; region = region->next) { +- struct resource *res; +- unsigned long phys_start, phys_end; +- +- if (region->size == 0) +- continue; +- +- phys_start = region->addr; +- phys_end = phys_start + region->size - 1; +- +- res = alloc_bootmem_low(sizeof(*res)); +- res->name = "System RAM"; +- res->start = phys_start; +- res->end = phys_end; +- res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; +- +- request_resource (&iomem_resource, res); ++ ret = add_reserved_region(fbmem_start, ++ fbmem_start + fbmem_size - 1, ++ "Framebuffer"); ++ if (ret) { ++ printk(KERN_WARNING ++ "Failed to reserve framebuffer memory\n"); ++ fbmem_start = 0; ++ } ++ } + +- if (kernel_code.start >= res->start && +- kernel_code.end <= res->end) +- request_resource (res, &kernel_code); +- if (kernel_data.start >= res->start && +- kernel_data.end <= res->end) +- request_resource (res, &kernel_data); ++ if (!fbmem_start) { ++ if ((fbmem_size & 0x000fffffUL) == 0) ++ align = 0x100000; /* 1 MiB */ ++ else if ((fbmem_size & 0x0000ffffUL) == 0) ++ align = 0x10000; /* 64 KiB */ ++ else ++ align = 0x1000; /* 4 KiB */ ++ ++ ret = alloc_reserved_region(&fbmem_start, fbmem_size, ++ align, "Framebuffer"); ++ if (ret) { ++ printk(KERN_WARNING ++ "Failed to allocate framebuffer memory\n"); ++ fbmem_size = 0; ++ } + } ++ ++ return 0; + } ++early_param("fbmem", early_parse_fbmem); + + static int __init parse_tag_core(struct tag *tag) + { +@@ -157,11 +291,9 @@ static int __init parse_tag_core(struct tag *tag) + } + __tagtable(ATAG_CORE, parse_tag_core); + +-static int __init parse_tag_mem_range(struct tag *tag, +- struct tag_mem_range **root) ++static int __init parse_tag_mem(struct tag *tag) + { +- struct tag_mem_range *cur, **pprev; +- struct tag_mem_range *new; ++ unsigned long start, end; + + /* + * Ignore zero-sized entries. If we're running standalone, the +@@ -171,34 +303,53 @@ static int __init parse_tag_mem_range(struct tag *tag, + if (tag->u.mem_range.size == 0) + return 0; + +- /* +- * Copy the data so the bootmem init code doesn't need to care +- * about it. +- */ +- if (mem_range_next_free >= ARRAY_SIZE(mem_range_cache)) +- panic("Physical memory map too complex!\n"); ++ start = tag->u.mem_range.addr; ++ end = tag->u.mem_range.addr + tag->u.mem_range.size - 1; ++ ++ add_physical_memory(start, end); ++ return 0; ++} ++__tagtable(ATAG_MEM, parse_tag_mem); ++ ++static int __init parse_tag_rdimg(struct tag *tag) ++{ ++#ifdef CONFIG_INITRD ++ struct tag_mem_range *mem = &tag->u.mem_range; ++ int ret; + +- new = &mem_range_cache[mem_range_next_free++]; +- *new = tag->u.mem_range; ++ if (initrd_start) { ++ printk(KERN_WARNING ++ "Warning: Only the first initrd image will be used\n"); ++ return 0; ++ } + +- pprev = root; +- cur = *root; +- while (cur) { +- pprev = &cur->next; +- cur = cur->next; ++ ret = add_reserved_region(mem->start, mem->start + mem->size - 1, ++ "initrd"); ++ if (ret) { ++ printk(KERN_WARNING ++ "Warning: Failed to reserve initrd memory\n"); ++ return ret; + } + +- *pprev = new; +- new->next = NULL; ++ initrd_start = (unsigned long)__va(mem->addr); ++ initrd_end = initrd_start + mem->size; ++#else ++ printk(KERN_WARNING "RAM disk image present, but " ++ "no initrd support in kernel, ignoring\n"); ++#endif + + return 0; + } ++__tagtable(ATAG_RDIMG, parse_tag_rdimg); + +-static int __init parse_tag_mem(struct tag *tag) ++static int __init parse_tag_rsvd_mem(struct tag *tag) + { +- return parse_tag_mem_range(tag, &mem_phys); ++ struct tag_mem_range *mem = &tag->u.mem_range; ++ ++ return add_reserved_region(mem->addr, mem->addr + mem->size - 1, ++ "Reserved"); + } +-__tagtable(ATAG_MEM, parse_tag_mem); ++__tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem); + + static int __init parse_tag_cmdline(struct tag *tag) + { +@@ -207,12 +358,6 @@ static int __init parse_tag_cmdline(struct tag *tag) + } + __tagtable(ATAG_CMDLINE, parse_tag_cmdline); + +-static int __init parse_tag_rdimg(struct tag *tag) +-{ +- return parse_tag_mem_range(tag, &mem_ramdisk); +-} +-__tagtable(ATAG_RDIMG, parse_tag_rdimg); +- + static int __init parse_tag_clock(struct tag *tag) + { + /* +@@ -223,12 +368,6 @@ static int __init parse_tag_clock(struct tag *tag) + } + __tagtable(ATAG_CLOCK, parse_tag_clock); + +-static int __init parse_tag_rsvd_mem(struct tag *tag) +-{ +- return parse_tag_mem_range(tag, &mem_reserved); +-} +-__tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem); +- + /* + * Scan the tag table for this tag, and call its parse function. The + * tag table is built by the linker from all the __tagtable +@@ -260,10 +399,137 @@ static void __init parse_tags(struct tag *t) + t->hdr.tag); + } + ++/* ++ * Find a free memory region large enough for storing the ++ * bootmem bitmap. ++ */ ++static unsigned long __init ++find_bootmap_pfn(const struct resource *mem) ++{ ++ unsigned long bootmap_pages, bootmap_len; ++ unsigned long node_pages = PFN_UP(mem->end - mem->start + 1); ++ unsigned long bootmap_start; ++ ++ bootmap_pages = bootmem_bootmap_pages(node_pages); ++ bootmap_len = bootmap_pages << PAGE_SHIFT; ++ ++ /* ++ * Find a large enough region without reserved pages for ++ * storing the bootmem bitmap. We can take advantage of the ++ * fact that all lists have been sorted. ++ * ++ * We have to check that we don't collide with any reserved ++ * regions, which includes the kernel image and any RAMDISK ++ * images. ++ */ ++ bootmap_start = find_free_region(mem, bootmap_len, PAGE_SIZE); ++ ++ return bootmap_start >> PAGE_SHIFT; ++} ++ ++#define MAX_LOWMEM HIGHMEM_START ++#define MAX_LOWMEM_PFN PFN_DOWN(MAX_LOWMEM) ++ ++static void __init setup_bootmem(void) ++{ ++ unsigned bootmap_size; ++ unsigned long first_pfn, bootmap_pfn, pages; ++ unsigned long max_pfn, max_low_pfn; ++ unsigned node = 0; ++ struct resource *res; ++ ++ printk(KERN_INFO "Physical memory:\n"); ++ for (res = system_ram; res; res = res->sibling) ++ printk(" %08x-%08x\n", res->start, res->end); ++ printk(KERN_INFO "Reserved memory:\n"); ++ for (res = reserved; res; res = res->sibling) ++ printk(" %08x-%08x: %s\n", ++ res->start, res->end, res->name); ++ ++ nodes_clear(node_online_map); ++ ++ if (system_ram->sibling) ++ printk(KERN_WARNING "Only using first memory bank\n"); ++ ++ for (res = system_ram; res; res = NULL) { ++ first_pfn = PFN_UP(res->start); ++ max_low_pfn = max_pfn = PFN_DOWN(res->end + 1); ++ bootmap_pfn = find_bootmap_pfn(res); ++ if (bootmap_pfn > max_pfn) ++ panic("No space for bootmem bitmap!\n"); ++ ++ if (max_low_pfn > MAX_LOWMEM_PFN) { ++ max_low_pfn = MAX_LOWMEM_PFN; ++#ifndef CONFIG_HIGHMEM ++ /* ++ * Lowmem is memory that can be addressed ++ * directly through P1/P2 ++ */ ++ printk(KERN_WARNING ++ "Node %u: Only %ld MiB of memory will be used.\n", ++ node, MAX_LOWMEM >> 20); ++ printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n"); ++#else ++#error HIGHMEM is not supported by AVR32 yet ++#endif ++ } ++ ++ /* Initialize the boot-time allocator with low memory only. */ ++ bootmap_size = init_bootmem_node(NODE_DATA(node), bootmap_pfn, ++ first_pfn, max_low_pfn); ++ ++ /* ++ * Register fully available RAM pages with the bootmem ++ * allocator. ++ */ ++ pages = max_low_pfn - first_pfn; ++ free_bootmem_node (NODE_DATA(node), PFN_PHYS(first_pfn), ++ PFN_PHYS(pages)); ++ ++ /* Reserve space for the bootmem bitmap... */ ++ reserve_bootmem_node(NODE_DATA(node), ++ PFN_PHYS(bootmap_pfn), ++ bootmap_size); ++ ++ /* ...and any other reserved regions. */ ++ for (res = reserved; res; res = res->sibling) { ++ if (res->start > PFN_PHYS(max_pfn)) ++ break; ++ ++ /* ++ * resource_init will complain about partial ++ * overlaps, so we'll just ignore such ++ * resources for now. ++ */ ++ if (res->start >= PFN_PHYS(first_pfn) ++ && res->end < PFN_PHYS(max_pfn)) ++ reserve_bootmem_node( ++ NODE_DATA(node), res->start, ++ res->end - res->start + 1); ++ } ++ ++ node_set_online(node); ++ } ++} ++ + void __init setup_arch (char **cmdline_p) + { + struct clk *cpu_clk; + ++ init_mm.start_code = (unsigned long)_text; ++ init_mm.end_code = (unsigned long)_etext; ++ init_mm.end_data = (unsigned long)_edata; ++ init_mm.brk = (unsigned long)_end; ++ ++ /* ++ * Include .init section to make allocations easier. It will ++ * be removed before the resource is actually requested. ++ */ ++ kernel_code.start = __pa(__init_begin); ++ kernel_code.end = __pa(init_mm.end_code - 1); ++ kernel_data.start = __pa(init_mm.end_code); ++ kernel_data.end = __pa(init_mm.brk - 1); ++ + parse_tags(bootloader_tags); + + setup_processor(); +@@ -289,24 +555,16 @@ void __init setup_arch (char **cmdline_p) + ((cpu_hz + 500) / 1000) % 1000); + } + +- init_mm.start_code = (unsigned long) &_text; +- init_mm.end_code = (unsigned long) &_etext; +- init_mm.end_data = (unsigned long) &_edata; +- init_mm.brk = (unsigned long) &_end; +- + strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); + *cmdline_p = command_line; + parse_early_param(); + + setup_bootmem(); + +- board_setup_fbmem(fbmem_start, fbmem_size); +- + #ifdef CONFIG_VT + conswitchp = &dummy_con; + #endif + + paging_init(); +- + resource_init(); + } +diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c +index c10833f..7014a35 100644 +--- a/arch/avr32/kernel/time.c ++++ b/arch/avr32/kernel/time.c +@@ -1,5 +1,5 @@ + /* +- * Copyright (C) 2004-2006 Atmel Corporation ++ * Copyright (C) 2004-2007 Atmel Corporation + * + * Based on MIPS implementation arch/mips/kernel/time.c + * Copyright 2001 MontaVista Software Inc. +@@ -20,18 +20,25 @@ + #include <linux/init.h> + #include <linux/profile.h> + #include <linux/sysdev.h> ++#include <linux/err.h> + + #include <asm/div64.h> + #include <asm/sysreg.h> + #include <asm/io.h> + #include <asm/sections.h> + +-static cycle_t read_cycle_count(void) ++/* how many counter cycles in a jiffy? */ ++static u32 cycles_per_jiffy; ++ ++/* the count value for the next timer interrupt */ ++static u32 expirelo; ++ ++cycle_t __weak read_cycle_count(void) + { + return (cycle_t)sysreg_read(COUNT); + } + +-static struct clocksource clocksource_avr32 = { ++struct clocksource __weak clocksource_avr32 = { + .name = "avr32", + .rating = 350, + .read = read_cycle_count, +@@ -40,12 +47,20 @@ static struct clocksource clocksource_avr32 = { + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + }; + ++irqreturn_t __weak timer_interrupt(int irq, void *dev_id); ++ ++struct irqaction timer_irqaction = { ++ .handler = timer_interrupt, ++ .flags = IRQF_DISABLED, ++ .name = "timer", ++}; ++ + /* + * By default we provide the null RTC ops + */ + static unsigned long null_rtc_get_time(void) + { +- return mktime(2004, 1, 1, 0, 0, 0); ++ return mktime(2007, 1, 1, 0, 0, 0); + } + + static int null_rtc_set_time(unsigned long sec) +@@ -56,23 +71,14 @@ static int null_rtc_set_time(unsigned long sec) + static unsigned long (*rtc_get_time)(void) = null_rtc_get_time; + static int (*rtc_set_time)(unsigned long) = null_rtc_set_time; + +-/* how many counter cycles in a jiffy? */ +-static unsigned long cycles_per_jiffy; +- +-/* cycle counter value at the previous timer interrupt */ +-static unsigned int timerhi, timerlo; +- +-/* the count value for the next timer interrupt */ +-static unsigned int expirelo; +- + static void avr32_timer_ack(void) + { +- unsigned int count; ++ u32 count; + + /* Ack this timer interrupt and set the next one */ + expirelo += cycles_per_jiffy; ++ /* setting COMPARE to 0 stops the COUNT-COMPARE */ + if (expirelo == 0) { +- printk(KERN_DEBUG "expirelo == 0\n"); + sysreg_write(COMPARE, expirelo + 1); + } else { + sysreg_write(COMPARE, expirelo); +@@ -86,27 +92,56 @@ static void avr32_timer_ack(void) + } + } + +-static unsigned int avr32_hpt_read(void) ++int __weak avr32_hpt_init(void) + { +- return sysreg_read(COUNT); ++ int ret; ++ unsigned long mult, shift, count_hz; ++ ++ count_hz = clk_get_rate(boot_cpu_data.clk); ++ shift = clocksource_avr32.shift; ++ mult = clocksource_hz2mult(count_hz, shift); ++ clocksource_avr32.mult = mult; ++ ++ { ++ u64 tmp; ++ ++ tmp = TICK_NSEC; ++ tmp <<= shift; ++ tmp += mult / 2; ++ do_div(tmp, mult); ++ ++ cycles_per_jiffy = tmp; ++ } ++ ++ ret = setup_irq(0, &timer_irqaction); ++ if (ret) { ++ pr_debug("timer: could not request IRQ 0: %d\n", ret); ++ return -ENODEV; ++ } ++ ++ printk(KERN_INFO "timer: AT32AP COUNT-COMPARE at irq 0, " ++ "%lu.%03lu MHz\n", ++ ((count_hz + 500) / 1000) / 1000, ++ ((count_hz + 500) / 1000) % 1000); ++ ++ return 0; + } + + /* + * Taken from MIPS c0_hpt_timer_init(). + * +- * Why is it so complicated, and what is "count"? My assumption is +- * that `count' specifies the "reference cycle", i.e. the cycle since +- * reset that should mean "zero". The reason COUNT is written twice is +- * probably to make sure we don't get any timer interrupts while we +- * are messing with the counter. ++ * The reason COUNT is written twice is probably to make sure we don't get any ++ * timer interrupts while we are messing with the counter. + */ +-static void avr32_hpt_init(unsigned int count) ++int __weak avr32_hpt_start(void) + { +- count = sysreg_read(COUNT) - count; ++ u32 count = sysreg_read(COUNT); + expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy; + sysreg_write(COUNT, expirelo - cycles_per_jiffy); + sysreg_write(COMPARE, expirelo); + sysreg_write(COUNT, count); ++ ++ return 0; + } + + /* +@@ -115,26 +150,18 @@ static void avr32_hpt_init(unsigned int count) + * + * In UP mode, it is invoked from the (global) timer_interrupt. + */ +-static void local_timer_interrupt(int irq, void *dev_id) ++void local_timer_interrupt(int irq, void *dev_id) + { + if (current->pid) + profile_tick(CPU_PROFILING); + update_process_times(user_mode(get_irq_regs())); + } + +-static irqreturn_t +-timer_interrupt(int irq, void *dev_id) ++irqreturn_t __weak timer_interrupt(int irq, void *dev_id) + { +- unsigned int count; +- + /* ack timer interrupt and try to set next interrupt */ +- count = avr32_hpt_read(); + avr32_timer_ack(); + +- /* Update timerhi/timerlo for intra-jiffy calibration */ +- timerhi += count < timerlo; /* Wrap around */ +- timerlo = count; +- + /* + * Call the generic timer interrupt handler + */ +@@ -153,60 +180,37 @@ timer_interrupt(int irq, void *dev_id) + return IRQ_HANDLED; + } + +-static struct irqaction timer_irqaction = { +- .handler = timer_interrupt, +- .flags = IRQF_DISABLED, +- .name = "timer", +-}; +- + void __init time_init(void) + { +- unsigned long mult, shift, count_hz; + int ret; + ++ /* ++ * Make sure we don't get any COMPARE interrupts before we can ++ * handle them. ++ */ ++ sysreg_write(COMPARE, 0); ++ + xtime.tv_sec = rtc_get_time(); + xtime.tv_nsec = 0; + + set_normalized_timespec(&wall_to_monotonic, + -xtime.tv_sec, -xtime.tv_nsec); + +- printk("Before time_init: count=%08lx, compare=%08lx\n", +- (unsigned long)sysreg_read(COUNT), +- (unsigned long)sysreg_read(COMPARE)); +- +- count_hz = clk_get_rate(boot_cpu_data.clk); +- shift = clocksource_avr32.shift; +- mult = clocksource_hz2mult(count_hz, shift); +- clocksource_avr32.mult = mult; +- +- printk("Cycle counter: mult=%lu, shift=%lu\n", mult, shift); +- +- { +- u64 tmp; +- +- tmp = TICK_NSEC; +- tmp <<= shift; +- tmp += mult / 2; +- do_div(tmp, mult); +- +- cycles_per_jiffy = tmp; ++ ret = avr32_hpt_init(); ++ if (ret) { ++ pr_debug("timer: failed setup: %d\n", ret); ++ return; + } + +- /* This sets up the high precision timer for the first interrupt. */ +- avr32_hpt_init(avr32_hpt_read()); +- +- printk("After time_init: count=%08lx, compare=%08lx\n", +- (unsigned long)sysreg_read(COUNT), +- (unsigned long)sysreg_read(COMPARE)); +- + ret = clocksource_register(&clocksource_avr32); + if (ret) +- printk(KERN_ERR +- "timer: could not register clocksource: %d\n", ret); ++ pr_debug("timer: could not register clocksource: %d\n", ret); + +- ret = setup_irq(0, &timer_irqaction); +- if (ret) +- printk("timer: could not request IRQ 0: %d\n", ret); ++ ret = avr32_hpt_start(); ++ if (ret) { ++ pr_debug("timer: failed starting: %d\n", ret); ++ return; ++ } + } + + static struct sysdev_class timer_class = { +diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c +index adc01a1..4d7ae14 100644 +--- a/arch/avr32/kernel/traps.c ++++ b/arch/avr32/kernel/traps.c +@@ -5,158 +5,25 @@ + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +-#undef DEBUG +-#include <linux/sched.h> ++ ++#include <linux/bug.h> + #include <linux/init.h> +-#include <linux/module.h> + #include <linux/kallsyms.h> ++#include <linux/module.h> + #include <linux/notifier.h> ++#include <linux/sched.h> ++#include <linux/uaccess.h> + +-#include <asm/traps.h> +-#include <asm/sysreg.h> + #include <asm/addrspace.h> +-#include <asm/ocd.h> + #include <asm/mmu_context.h> +-#include <asm/uaccess.h> +- +-static void dump_mem(const char *str, unsigned long bottom, unsigned long top) +-{ +- unsigned long p; +- int i; +- +- printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top); +- +- for (p = bottom & ~31; p < top; ) { +- printk("%04lx: ", p & 0xffff); +- +- for (i = 0; i < 8; i++, p += 4) { +- unsigned int val; +- +- if (p < bottom || p >= top) +- printk(" "); +- else { +- if (__get_user(val, (unsigned int __user *)p)) { +- printk("\n"); +- goto out; +- } +- printk("%08x ", val); +- } +- } +- printk("\n"); +- } +- +-out: +- return; +-} +- +-static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p) +-{ +- return (p > (unsigned long)tinfo) +- && (p < (unsigned long)tinfo + THREAD_SIZE - 3); +-} +- +-#ifdef CONFIG_FRAME_POINTER +-static inline void __show_trace(struct task_struct *tsk, unsigned long *sp, +- struct pt_regs *regs) +-{ +- unsigned long lr, fp; +- struct thread_info *tinfo; +- +- tinfo = (struct thread_info *) +- ((unsigned long)sp & ~(THREAD_SIZE - 1)); +- +- if (regs) +- fp = regs->r7; +- else if (tsk == current) +- asm("mov %0, r7" : "=r"(fp)); +- else +- fp = tsk->thread.cpu_context.r7; +- +- /* +- * Walk the stack as long as the frame pointer (a) is within +- * the kernel stack of the task, and (b) it doesn't move +- * downwards. +- */ +- while (valid_stack_ptr(tinfo, fp)) { +- unsigned long new_fp; +- +- lr = *(unsigned long *)fp; +- printk(" [<%08lx>] ", lr); +- print_symbol("%s\n", lr); +- +- new_fp = *(unsigned long *)(fp + 4); +- if (new_fp <= fp) +- break; +- fp = new_fp; +- } +- printk("\n"); +-} +-#else +-static inline void __show_trace(struct task_struct *tsk, unsigned long *sp, +- struct pt_regs *regs) +-{ +- unsigned long addr; +- +- while (!kstack_end(sp)) { +- addr = *sp++; +- if (kernel_text_address(addr)) { +- printk(" [<%08lx>] ", addr); +- print_symbol("%s\n", addr); +- } +- } +-} +-#endif +- +-void show_trace(struct task_struct *tsk, unsigned long *sp, +- struct pt_regs *regs) +-{ +- if (regs && +- (((regs->sr & MODE_MASK) == MODE_EXCEPTION) || +- ((regs->sr & MODE_MASK) == MODE_USER))) +- return; +- +- printk ("Call trace:"); +-#ifdef CONFIG_KALLSYMS +- printk("\n"); +-#endif +- +- __show_trace(tsk, sp, regs); +- printk("\n"); +-} +- +-void show_stack(struct task_struct *tsk, unsigned long *sp) +-{ +- unsigned long stack; +- +- if (!tsk) +- tsk = current; +- if (sp == 0) { +- if (tsk == current) { +- register unsigned long *real_sp __asm__("sp"); +- sp = real_sp; +- } else { +- sp = (unsigned long *)tsk->thread.cpu_context.ksp; +- } +- } +- +- stack = (unsigned long)sp; +- dump_mem("Stack: ", stack, +- THREAD_SIZE + (unsigned long)tsk->thread_info); +- show_trace(tsk, sp, NULL); +-} +- +-void dump_stack(void) +-{ +- show_stack(NULL, NULL); +-} +-EXPORT_SYMBOL(dump_stack); ++#include <asm/ocd.h> ++#include <asm/sysreg.h> ++#include <asm/traps.h> + + ATOMIC_NOTIFIER_HEAD(avr32_die_chain); + + int register_die_notifier(struct notifier_block *nb) + { +- pr_debug("register_die_notifier: %p\n", nb); +- + return atomic_notifier_chain_register(&avr32_die_chain, nb); + } + EXPORT_SYMBOL(register_die_notifier); +@@ -169,98 +36,108 @@ EXPORT_SYMBOL(unregister_die_notifier); + + static DEFINE_SPINLOCK(die_lock); + +-void __die(const char *str, struct pt_regs *regs, unsigned long err, +- const char *file, const char *func, unsigned long line) ++void NORET_TYPE die(const char *str, struct pt_regs *regs, long err) + { +- struct task_struct *tsk = current; + static int die_counter; + + console_verbose(); + spin_lock_irq(&die_lock); + bust_spinlocks(1); + +- printk(KERN_ALERT "%s", str); +- if (file && func) +- printk(" in %s:%s, line %ld", file, func, line); +- printk("[#%d]:\n", ++die_counter); +- print_modules(); +- show_regs(regs); +- printk("Process %s (pid: %d, stack limit = 0x%p)\n", +- tsk->comm, tsk->pid, tsk->thread_info + 1); +- +- if (!user_mode(regs) || in_interrupt()) { +- dump_mem("Stack: ", regs->sp, +- THREAD_SIZE + (unsigned long)tsk->thread_info); ++ printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG, ++ str, err, ++die_counter); ++#ifdef CONFIG_PREEMPT ++ printk("PREEMPT "); ++#endif ++#ifdef CONFIG_FRAME_POINTER ++ printk("FRAME_POINTER "); ++#endif ++ if (current_cpu_data.features & AVR32_FEATURE_OCD) { ++ unsigned long did = __mfdr(DBGREG_DID); ++ printk("chip: 0x%03lx:0x%04lx rev %lu\n", ++ (did >> 1) & 0x7ff, ++ (did >> 12) & 0x7fff, ++ (did >> 28) & 0xf); ++ } else { ++ printk("cpu: arch %u r%u / core %u r%u\n", ++ current_cpu_data.arch_type, ++ current_cpu_data.arch_revision, ++ current_cpu_data.cpu_type, ++ current_cpu_data.cpu_revision); + } + ++ print_modules(); ++ show_regs_log_lvl(regs, KERN_EMERG); ++ show_stack_log_lvl(current, regs->sp, regs, KERN_EMERG); + bust_spinlocks(0); + spin_unlock_irq(&die_lock); +- do_exit(SIGSEGV); ++ ++ if (in_interrupt()) ++ panic("Fatal exception in interrupt"); ++ ++ if (panic_on_oops) ++ panic("Fatal exception"); ++ ++ do_exit(err); + } + +-void __die_if_kernel(const char *str, struct pt_regs *regs, unsigned long err, +- const char *file, const char *func, unsigned long line) ++void _exception(long signr, struct pt_regs *regs, int code, ++ unsigned long addr) + { ++ siginfo_t info; ++ + if (!user_mode(regs)) +- __die(str, regs, err, file, func, line); +-} ++ die("Unhandled exception in kernel mode", regs, signr); ++ ++ memset(&info, 0, sizeof(info)); ++ info.si_signo = signr; ++ info.si_code = code; ++ info.si_addr = (void __user *)addr; ++ force_sig_info(signr, &info, current); + +-asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs) +-{ +-#ifdef CONFIG_SUBARCH_AVR32B + /* +- * The exception entry always saves RSR_EX. For NMI, this is +- * wrong; it should be RSR_NMI ++ * Init gets no signals that it doesn't have a handler for. ++ * That's all very well, but if it has caused a synchronous ++ * exception and we ignore the resulting signal, it will just ++ * generate the same exception over and over again and we get ++ * nowhere. Better to kill it and let the kernel panic. + */ +- regs->sr = sysreg_read(RSR_NMI); +-#endif ++ if (is_init(current)) { ++ __sighandler_t handler; ++ ++ spin_lock_irq(¤t->sighand->siglock); ++ handler = current->sighand->action[signr-1].sa.sa_handler; ++ spin_unlock_irq(¤t->sighand->siglock); ++ if (handler == SIG_DFL) { ++ /* init has generated a synchronous exception ++ and it doesn't have a handler for the signal */ ++ printk(KERN_CRIT "init has generated signal %ld " ++ "but has no handler for it\n", signr); ++ do_exit(signr); ++ } ++ } ++} + +- printk("NMI taken!!!!\n"); +- die("NMI", regs, ecr); +- BUG(); ++asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs) ++{ ++ printk(KERN_ALERT "Got Non-Maskable Interrupt, dumping regs\n"); ++ show_regs_log_lvl(regs, KERN_ALERT); ++ show_stack_log_lvl(current, regs->sp, regs, KERN_ALERT); + } + + asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs) + { +- printk("Unable to handle critical exception %lu at pc = %08lx!\n", +- ecr, regs->pc); +- die("Oops", regs, ecr); +- BUG(); ++ die("Critical exception", regs, SIGKILL); + } + + asmlinkage void do_address_exception(unsigned long ecr, struct pt_regs *regs) + { +- siginfo_t info; +- +- die_if_kernel("Oops: Address exception in kernel mode", regs, ecr); +- +-#ifdef DEBUG +- if (ecr == ECR_ADDR_ALIGN_X) +- pr_debug("Instruction Address Exception at pc = %08lx\n", +- regs->pc); +- else if (ecr == ECR_ADDR_ALIGN_R) +- pr_debug("Data Address Exception (Read) at pc = %08lx\n", +- regs->pc); +- else if (ecr == ECR_ADDR_ALIGN_W) +- pr_debug("Data Address Exception (Write) at pc = %08lx\n", +- regs->pc); +- else +- BUG(); +- +- show_regs(regs); +-#endif +- +- info.si_signo = SIGBUS; +- info.si_errno = 0; +- info.si_code = BUS_ADRALN; +- info.si_addr = (void __user *)regs->pc; +- +- force_sig_info(SIGBUS, &info, current); ++ _exception(SIGBUS, regs, BUS_ADRALN, regs->pc); + } + + /* This way of handling undefined instructions is stolen from ARM */ + static LIST_HEAD(undef_hook); +-static spinlock_t undef_lock = SPIN_LOCK_UNLOCKED; ++static DEFINE_SPINLOCK(undef_lock); + + void register_undef_hook(struct undef_hook *hook) + { +@@ -280,7 +157,8 @@ static int do_cop_absent(u32 insn) + { + int cop_nr; + u32 cpucr; +- if ( (insn & 0xfdf00000) == 0xf1900000 ) ++ ++ if ((insn & 0xfdf00000) == 0xf1900000) + /* LDC0 */ + cop_nr = 0; + else +@@ -292,136 +170,91 @@ static int do_cop_absent(u32 insn) + sysreg_write(CPUCR, cpucr); + + cpucr = sysreg_read(CPUCR); +- if ( !(cpucr & (1 << (24 + cop_nr))) ){ +- printk("Coprocessor #%i not found!\n", cop_nr); +- return -1; +- } ++ if (!(cpucr & (1 << (24 + cop_nr)))) ++ return -ENODEV; + + return 0; + } + +-#ifdef CONFIG_BUG +-#ifdef CONFIG_DEBUG_BUGVERBOSE +-static inline void do_bug_verbose(struct pt_regs *regs, u32 insn) +-{ +- char *file; +- u16 line; +- char c; +- +- if (__get_user(line, (u16 __user *)(regs->pc + 2))) +- return; +- if (__get_user(file, (char * __user *)(regs->pc + 4)) +- || (unsigned long)file < PAGE_OFFSET +- || __get_user(c, file)) +- file = "<bad filename>"; +- +- printk(KERN_ALERT "kernel BUG at %s:%d!\n", file, line); +-} +-#else +-static inline void do_bug_verbose(struct pt_regs *regs, u32 insn) ++int is_valid_bugaddr(unsigned long pc) + { ++ unsigned short opcode; ++ ++ if (pc < PAGE_OFFSET) ++ return 0; ++ if (probe_kernel_address((u16 *)pc, opcode)) ++ return 0; + ++ return opcode == AVR32_BUG_OPCODE; + } +-#endif +-#endif + + asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs) + { + u32 insn; + struct undef_hook *hook; +- siginfo_t info; + void __user *pc; ++ long code; + +- if (!user_mode(regs)) +- goto kernel_trap; ++ if (!user_mode(regs) && (ecr == ECR_ILLEGAL_OPCODE)) { ++ enum bug_trap_type type; ++ ++ type = report_bug(regs->pc); ++ switch (type) { ++ case BUG_TRAP_TYPE_NONE: ++ break; ++ case BUG_TRAP_TYPE_WARN: ++ regs->pc += 2; ++ return; ++ case BUG_TRAP_TYPE_BUG: ++ die("Kernel BUG", regs, SIGKILL); ++ } ++ } + + local_irq_enable(); + +- pc = (void __user *)instruction_pointer(regs); +- if (__get_user(insn, (u32 __user *)pc)) +- goto invalid_area; ++ if (user_mode(regs)) { ++ pc = (void __user *)instruction_pointer(regs); ++ if (get_user(insn, (u32 __user *)pc)) ++ goto invalid_area; + +- if (ecr == ECR_COPROC_ABSENT) { +- if (do_cop_absent(insn) == 0) ++ if (ecr == ECR_COPROC_ABSENT && !do_cop_absent(insn)) + return; +- } + +- spin_lock_irq(&undef_lock); +- list_for_each_entry(hook, &undef_hook, node) { +- if ((insn & hook->insn_mask) == hook->insn_val) { +- if (hook->fn(regs, insn) == 0) { +- spin_unlock_irq(&undef_lock); +- return; ++ spin_lock_irq(&undef_lock); ++ list_for_each_entry(hook, &undef_hook, node) { ++ if ((insn & hook->insn_mask) == hook->insn_val) { ++ if (hook->fn(regs, insn) == 0) { ++ spin_unlock_irq(&undef_lock); ++ return; ++ } + } + } ++ spin_unlock_irq(&undef_lock); + } +- spin_unlock_irq(&undef_lock); +- +-invalid_area: + +-#ifdef DEBUG +- printk("Illegal instruction at pc = %08lx\n", regs->pc); +- if (regs->pc < TASK_SIZE) { +- unsigned long ptbr, pgd, pte, *p; +- +- ptbr = sysreg_read(PTBR); +- p = (unsigned long *)ptbr; +- pgd = p[regs->pc >> 22]; +- p = (unsigned long *)((pgd & 0x1ffff000) | 0x80000000); +- pte = p[(regs->pc >> 12) & 0x3ff]; +- printk("page table: 0x%08lx -> 0x%08lx -> 0x%08lx\n", ptbr, pgd, pte); +- } +-#endif +- +- info.si_signo = SIGILL; +- info.si_errno = 0; +- info.si_addr = (void __user *)regs->pc; + switch (ecr) { +- case ECR_ILLEGAL_OPCODE: +- case ECR_UNIMPL_INSTRUCTION: +- info.si_code = ILL_ILLOPC; +- break; + case ECR_PRIVILEGE_VIOLATION: +- info.si_code = ILL_PRVOPC; ++ code = ILL_PRVOPC; + break; + case ECR_COPROC_ABSENT: +- info.si_code = ILL_COPROC; ++ code = ILL_COPROC; + break; + default: +- BUG(); ++ code = ILL_ILLOPC; ++ break; + } + +- force_sig_info(SIGILL, &info, current); ++ _exception(SIGILL, regs, code, regs->pc); + return; + +-kernel_trap: +-#ifdef CONFIG_BUG +- if (__kernel_text_address(instruction_pointer(regs))) { +- insn = *(u16 *)instruction_pointer(regs); +- if (insn == AVR32_BUG_OPCODE) { +- do_bug_verbose(regs, insn); +- die("Kernel BUG", regs, 0); +- return; +- } +- } +-#endif +- +- die("Oops: Illegal instruction in kernel code", regs, ecr); ++invalid_area: ++ _exception(SIGSEGV, regs, SEGV_MAPERR, regs->pc); + } + + asmlinkage void do_fpe(unsigned long ecr, struct pt_regs *regs) + { +- siginfo_t info; +- +- printk("Floating-point exception at pc = %08lx\n", regs->pc); +- +- /* We have no FPU... */ +- info.si_signo = SIGILL; +- info.si_errno = 0; +- info.si_addr = (void __user *)regs->pc; +- info.si_code = ILL_COPROC; +- +- force_sig_info(SIGILL, &info, current); ++ /* We have no FPU yet */ ++ _exception(SIGILL, regs, ILL_COPROC, regs->pc); + } + + +diff --git a/arch/avr32/kernel/vmlinux.lds.c b/arch/avr32/kernel/vmlinux.lds.c +index ef13b7c..e7f72c9 100644 +--- a/arch/avr32/kernel/vmlinux.lds.c ++++ b/arch/avr32/kernel/vmlinux.lds.c +@@ -26,10 +26,16 @@ SECTIONS + _sinittext = .; + *(.text.reset) + *(.init.text) ++ /* ++ * .exit.text is discarded at runtime, not ++ * link time, to deal with references from ++ * __bug_table ++ */ ++ *(.exit.text) + _einittext = .; + . = ALIGN(4); + __tagtable_begin = .; +- *(.taglist) ++ *(.taglist.init) + __tagtable_end = .; + *(.init.data) + . = ALIGN(16); +@@ -86,6 +92,8 @@ SECTIONS + __stop___ex_table = .; + } + ++ BUG_TABLE ++ + RODATA + + . = ALIGN(8192); +@@ -126,7 +134,6 @@ SECTIONS + * thrown away, as cleanup code is never called unless it's a module. + */ + /DISCARD/ : { +- *(.exit.text) + *(.exit.data) + *(.exitcall.exit) + } +diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig +new file mode 100644 +index 0000000..eb30783 +--- /dev/null ++++ b/arch/avr32/mach-at32ap/Kconfig +@@ -0,0 +1,31 @@ ++if PLATFORM_AT32AP ++ ++menu "Atmel AVR32 AP options" ++ ++choice ++ prompt "AT32AP7000 static memory bus width" ++ depends on CPU_AT32AP7000 ++ default AP7000_16_BIT_SMC ++ help ++ Define the width of the AP7000 external static memory interface. ++ This is used to determine how to mangle the address and/or data ++ when doing little-endian port access. ++ ++ The current code can only support a single external memory bus ++ width for all chip selects, excluding the flash (which is using ++ raw access and is thus not affected by any of this.) ++ ++config AP7000_32_BIT_SMC ++ bool "32 bit" ++ ++config AP7000_16_BIT_SMC ++ bool "16 bit" ++ ++config AP7000_8_BIT_SMC ++ bool "8 bit" ++ ++endchoice ++ ++endmenu ++ ++endif # PLATFORM_AT32AP +diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile +index b21bea9..f1d3957 100644 +--- a/arch/avr32/mach-at32ap/Makefile ++++ b/arch/avr32/mach-at32ap/Makefile +@@ -1,2 +1,3 @@ + obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o + obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o ++obj-$(CONFIG_CPU_AT32AP7000) += time-tc.o +diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c +index 472703f..028883f 100644 +--- a/arch/avr32/mach-at32ap/at32ap7000.c ++++ b/arch/avr32/mach-at32ap/at32ap7000.c +@@ -6,6 +6,7 @@ + * published by the Free Software Foundation. + */ + #include <linux/clk.h> ++#include <linux/fb.h> + #include <linux/init.h> + #include <linux/platform_device.h> + #include <linux/spi/spi.h> +@@ -17,7 +18,10 @@ + #include <asm/arch/portmux.h> + #include <asm/arch/sm.h> + ++#include <video/atmel_lcdc.h> ++ + #include "clock.h" ++#include "hmatrix.h" + #include "pio.h" + #include "sm.h" + +@@ -407,8 +411,6 @@ static void __init genclk_init_parent(struct clk *clk) + static struct resource sm_resource[] = { + PBMEM(0xfff00000), + NAMED_IRQ(19, "eim"), +- NAMED_IRQ(20, "pm"), +- NAMED_IRQ(21, "rtc"), + }; + struct platform_device at32_sm_device = { + .name = "sm", +@@ -416,7 +418,55 @@ struct platform_device at32_sm_device = { + .resource = sm_resource, + .num_resources = ARRAY_SIZE(sm_resource), + }; +-DEV_CLK(pclk, at32_sm, pbb, 0); ++static struct clk at32_sm_pclk = { ++ .name = "pclk", ++ .dev = &at32_sm_device.dev, ++ .parent = &pbb_clk, ++ .mode = pbb_clk_mode, ++ .get_rate = pbb_clk_get_rate, ++ .users = 1, ++ .index = 0, ++}; ++ ++static struct resource pm_resource[] = { ++ PBMEM(0xfff00000), ++ IRQ(20), ++}; ++struct platform_device at32_pm_device = { ++ .name = "pm", ++ .id = 0, ++ .resource = pm_resource, ++ .num_resources = ARRAY_SIZE(pm_resource), ++}; ++ ++static struct resource rtc_resource[] = { ++ { ++ .start = 0xfff00080, ++ .end = 0xfff000a3, ++ .flags = IORESOURCE_MEM, ++ }, ++ IRQ(21), ++}; ++struct platform_device at32_rtc_device = { ++ .name = "rtc", ++ .id = 0, ++ .resource = rtc_resource, ++ .num_resources = ARRAY_SIZE(rtc_resource), ++}; ++ ++static struct resource wdt_resource[] = { ++ { ++ .start = 0xfff000b0, ++ .end = 0xfff000b7, ++ .flags = IORESOURCE_MEM, ++ }, ++}; ++struct platform_device at32_wdt_device = { ++ .name = "wdt", ++ .id = 0, ++ .resource = wdt_resource, ++ .num_resources = ARRAY_SIZE(wdt_resource), ++}; + + static struct resource intc0_resource[] = { + PBMEM(0xfff00400), +@@ -442,6 +492,7 @@ static struct clk hramc_clk = { + .mode = hsb_clk_mode, + .get_rate = hsb_clk_get_rate, + .users = 1, ++ .index = 3, + }; + + static struct resource smc0_resource[] = { +@@ -466,6 +517,68 @@ static struct clk pico_clk = { + .users = 1, + }; + ++static struct resource dmaca0_resource[] = { ++ { ++ .start = 0xff200000, ++ .end = 0xff20ffff, ++ .flags = IORESOURCE_MEM, ++ }, ++ IRQ(2), ++}; ++DEFINE_DEV(dmaca, 0); ++DEV_CLK(hclk, dmaca0, hsb, 10); ++ ++/* -------------------------------------------------------------------- ++ * HMATRIX ++ * -------------------------------------------------------------------- */ ++ ++static struct clk hmatrix_clk = { ++ .name = "hmatrix_clk", ++ .parent = &pbb_clk, ++ .mode = pbb_clk_mode, ++ .get_rate = pbb_clk_get_rate, ++ .index = 2, ++ .users = 1, ++}; ++#define HMATRIX_BASE ((void __iomem *)0xfff00800) ++ ++#define hmatrix_readl(reg) \ ++ __raw_readl((HMATRIX_BASE) + HMATRIX_##reg) ++#define hmatrix_writel(reg,value) \ ++ __raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg) ++ ++/* ++ * Set bits in the HMATRIX Special Function Register (SFR) used by the ++ * External Bus Interface (EBI). This can be used to enable special ++ * features like CompactFlash support, NAND Flash support, etc. on ++ * certain chipselects. ++ */ ++static inline void set_ebi_sfr_bits(u32 mask) ++{ ++ u32 sfr; ++ ++ clk_enable(&hmatrix_clk); ++ sfr = hmatrix_readl(SFR4); ++ sfr |= mask; ++ hmatrix_writel(SFR4, sfr); ++ clk_disable(&hmatrix_clk); ++} ++ ++/* -------------------------------------------------------------------- ++ * System Timer/Counter (TC) ++ * -------------------------------------------------------------------- */ ++static struct resource at32_systc0_resource[] = { ++ PBMEM(0xfff00c00), ++ IRQ(22), ++}; ++struct platform_device at32_systc0_device = { ++ .name = "systc", ++ .id = 0, ++ .resource = at32_systc0_resource, ++ .num_resources = ARRAY_SIZE(at32_systc0_resource), ++}; ++DEV_CLK(pclk, at32_systc0, pbb, 3); ++ + /* -------------------------------------------------------------------- + * PIO + * -------------------------------------------------------------------- */ +@@ -510,9 +623,15 @@ void __init at32_add_system_devices(void) + system_manager.eim_first_irq = EIM_IRQ_BASE; + + platform_device_register(&at32_sm_device); ++ platform_device_register(&at32_pm_device); ++ platform_device_register(&at32_rtc_device); ++ platform_device_register(&at32_wdt_device); + platform_device_register(&at32_intc0_device); + platform_device_register(&smc0_device); + platform_device_register(&pdc_device); ++ platform_device_register(&dmaca0_device); ++ ++ platform_device_register(&at32_systc0_device); + + platform_device_register(&pio0_device); + platform_device_register(&pio1_device); +@@ -816,22 +935,105 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n) + } + + /* -------------------------------------------------------------------- ++ * TWI ++ * -------------------------------------------------------------------- */ ++ ++static struct resource atmel_twi0_resource[] = { ++ PBMEM(0xffe00800), ++ IRQ(5), ++}; ++DEFINE_DEV(atmel_twi, 0); ++DEV_CLK(pclk,atmel_twi0,pba,2); ++ ++struct platform_device *__init ++at32_add_device_twi(unsigned int id) ++{ ++ struct platform_device *pdev; ++ ++ switch (id) { ++ case 0: ++ pdev = &atmel_twi0_device; ++ select_peripheral(PA(6), PERIPH_A, 0); /* SDA */ ++ select_peripheral(PA(7), PERIPH_A, 0); /* SCL */ ++ break; ++ ++ default: ++ return NULL; ++ } ++ ++ platform_device_register(pdev); ++ return pdev; ++} ++ ++/* -------------------------------------------------------------------- ++ * MMC ++ * -------------------------------------------------------------------- */ ++static struct mci_platform_data atmel_mci0_data = { ++ .detect_pin = GPIO_PIN_NONE, ++ .wp_pin = GPIO_PIN_NONE, ++}; ++static struct resource atmel_mci0_resource[] = { ++ PBMEM(0xfff02400), ++ IRQ(28), ++}; ++DEFINE_DEV_DATA(atmel_mci, 0); ++DEV_CLK(mci_clk, atmel_mci0, pbb, 9); ++ ++struct platform_device *__init ++at32_add_device_mci(unsigned int id, struct mci_platform_data *data) ++{ ++ struct platform_device *pdev; ++ ++ switch (id) { ++ case 0: ++ pdev = &atmel_mci0_device; ++ select_peripheral(PA(10), PERIPH_A, 0); /* CLK */ ++ select_peripheral(PA(11), PERIPH_A, 0); /* CMD */ ++ select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */ ++ select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */ ++ select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */ ++ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */ ++ break; ++ default: ++ return NULL; ++ } ++ ++ if (data) { ++ if (data->detect_pin != GPIO_PIN_NONE) ++ at32_select_gpio(data->detect_pin, 0); ++ if (data->wp_pin != GPIO_PIN_NONE) ++ at32_select_gpio(data->wp_pin, 0); ++ memcpy(pdev->dev.platform_data, data, ++ sizeof(struct mci_platform_data)); ++ } ++ ++ platform_device_register(pdev); ++ return pdev; ++} ++ ++/* -------------------------------------------------------------------- + * LCDC + * -------------------------------------------------------------------- */ +-static struct lcdc_platform_data lcdc0_data; +-static struct resource lcdc0_resource[] = { ++static struct atmel_lcdfb_info atmel_lcdfb0_data; ++static struct resource atmel_lcdfb0_resource[] = { + { + .start = 0xff000000, + .end = 0xff000fff, + .flags = IORESOURCE_MEM, + }, + IRQ(1), ++ { ++ /* Placeholder for pre-allocated fb memory */ ++ .start = 0x00000000, ++ .end = 0x00000000, ++ .flags = 0, ++ }, + }; +-DEFINE_DEV_DATA(lcdc, 0); +-DEV_CLK(hclk, lcdc0, hsb, 7); +-static struct clk lcdc0_pixclk = { +- .name = "pixclk", +- .dev = &lcdc0_device.dev, ++DEFINE_DEV_DATA(atmel_lcdfb, 0); ++DEV_CLK(hck1, atmel_lcdfb0, hsb, 7); ++static struct clk atmel_lcdfb0_pixclk = { ++ .name = "lcdc_clk", ++ .dev = &atmel_lcdfb0_device.dev, + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, +@@ -840,13 +1042,34 @@ static struct clk lcdc0_pixclk = { + }; + + struct platform_device *__init +-at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data) ++at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, ++ unsigned long fbmem_start, unsigned long fbmem_len) + { + struct platform_device *pdev; ++ struct atmel_lcdfb_info *info; ++ struct fb_monspecs *monspecs; ++ struct fb_videomode *modedb; ++ unsigned int modedb_size; ++ ++ /* ++ * Do a deep copy of the fb data, monspecs and modedb. Make ++ * sure all allocations are done before setting up the ++ * portmux. ++ */ ++ monspecs = kmemdup(data->default_monspecs, ++ sizeof(struct fb_monspecs), GFP_KERNEL); ++ if (!monspecs) ++ return NULL; ++ ++ modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len; ++ modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL); ++ if (!modedb) ++ goto err_dup_modedb; ++ monspecs->modedb = modedb; + + switch (id) { + case 0: +- pdev = &lcdc0_device; ++ pdev = &atmel_lcdfb0_device; + select_peripheral(PC(19), PERIPH_A, 0); /* CC */ + select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */ + select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */ +@@ -879,16 +1102,287 @@ at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data) + select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */ + select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */ + +- clk_set_parent(&lcdc0_pixclk, &pll0); +- clk_set_rate(&lcdc0_pixclk, clk_get_rate(&pll0)); ++ clk_set_parent(&atmel_lcdfb0_pixclk, &pll0); ++ clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0)); ++ break; ++ ++ default: ++ goto err_invalid_id; ++ } ++ ++ if (fbmem_len) { ++ pdev->resource[2].start = fbmem_start; ++ pdev->resource[2].end = fbmem_start + fbmem_len - 1; ++ pdev->resource[2].flags = IORESOURCE_MEM; ++ } ++ ++ info = pdev->dev.platform_data; ++ memcpy(info, data, sizeof(struct atmel_lcdfb_info)); ++ info->default_monspecs = monspecs; ++ ++ platform_device_register(pdev); ++ return pdev; ++ ++err_invalid_id: ++ kfree(modedb); ++err_dup_modedb: ++ kfree(monspecs); ++ return NULL; ++} ++ ++/* -------------------------------------------------------------------- ++ * USB Device Controller ++ * -------------------------------------------------------------------- */ ++static struct resource usba0_resource[] = { ++ { ++ .start = 0xff300000, ++ .end = 0xff3fffff, ++ .flags = IORESOURCE_MEM, ++ }, ++ PBMEM(0xfff03000), ++ IRQ(31), ++}; ++DEFINE_DEV(usba, 0); ++DEV_CLK(pclk, usba0, pbb, 12); ++DEV_CLK(hclk, usba0, hsb, 6); ++ ++struct platform_device *__init at32_add_device_usba(unsigned int id) ++{ ++ struct platform_device *pdev; ++ ++ switch (id) { ++ case 0: ++ pdev = &usba0_device; ++ /* USB pads are not multiplexed */ + break; ++ default: ++ return NULL; ++ } + ++ platform_device_register(pdev); ++ return pdev; ++} ++ ++/* -------------------------------------------------------------------- ++ * SSC ++ * -------------------------------------------------------------------- */ ++static struct resource ssc0_resource[] = { ++ PBMEM(0xffe01c00), ++ IRQ(10), ++}; ++DEFINE_DEV(ssc, 0); ++DEV_CLK(pclk, ssc0, pba, 7); ++ ++static struct resource ssc1_resource[] = { ++ PBMEM(0xffe02000), ++ IRQ(11), ++}; ++DEFINE_DEV(ssc, 1); ++DEV_CLK(pclk, ssc1, pba, 8); ++ ++static struct resource ssc2_resource[] = { ++ PBMEM(0xffe02400), ++ IRQ(12), ++}; ++DEFINE_DEV(ssc, 2); ++DEV_CLK(pclk, ssc2, pba, 9); ++ ++struct platform_device *__init ++at32_add_device_ssc(unsigned int id, unsigned int flags) ++{ ++ struct platform_device *pdev; ++ ++ switch (id) { ++ case 0: ++ pdev = &ssc0_device; ++ if (flags & ATMEL_SSC_RF) ++ select_peripheral(PA(21), PERIPH_A, 0); /* RF */ ++ if (flags & ATMEL_SSC_RK) ++ select_peripheral(PA(22), PERIPH_A, 0); /* RK */ ++ if (flags & ATMEL_SSC_TK) ++ select_peripheral(PA(23), PERIPH_A, 0); /* TK */ ++ if (flags & ATMEL_SSC_TF) ++ select_peripheral(PA(24), PERIPH_A, 0); /* TF */ ++ if (flags & ATMEL_SSC_TD) ++ select_peripheral(PA(25), PERIPH_A, 0); /* TD */ ++ if (flags & ATMEL_SSC_RD) ++ select_peripheral(PA(26), PERIPH_A, 0); /* RD */ ++ break; ++ case 1: ++ pdev = &ssc1_device; ++ if (flags & ATMEL_SSC_RF) ++ select_peripheral(PA(0), PERIPH_B, 0); /* RF */ ++ if (flags & ATMEL_SSC_RK) ++ select_peripheral(PA(1), PERIPH_B, 0); /* RK */ ++ if (flags & ATMEL_SSC_TK) ++ select_peripheral(PA(2), PERIPH_B, 0); /* TK */ ++ if (flags & ATMEL_SSC_TF) ++ select_peripheral(PA(3), PERIPH_B, 0); /* TF */ ++ if (flags & ATMEL_SSC_TD) ++ select_peripheral(PA(4), PERIPH_B, 0); /* TD */ ++ if (flags & ATMEL_SSC_RD) ++ select_peripheral(PA(5), PERIPH_B, 0); /* RD */ ++ break; ++ case 2: ++ pdev = &ssc2_device; ++ if (flags & ATMEL_SSC_TD) ++ select_peripheral(PB(13), PERIPH_A, 0); /* TD */ ++ if (flags & ATMEL_SSC_RD) ++ select_peripheral(PB(14), PERIPH_A, 0); /* RD */ ++ if (flags & ATMEL_SSC_TK) ++ select_peripheral(PB(15), PERIPH_A, 0); /* TK */ ++ if (flags & ATMEL_SSC_TF) ++ select_peripheral(PB(16), PERIPH_A, 0); /* TF */ ++ if (flags & ATMEL_SSC_RF) ++ select_peripheral(PB(17), PERIPH_A, 0); /* RF */ ++ if (flags & ATMEL_SSC_RK) ++ select_peripheral(PB(18), PERIPH_A, 0); /* RK */ ++ break; ++ default: ++ return NULL; ++ } ++ ++ platform_device_register(pdev); ++ return pdev; ++} ++ ++/* -------------------------------------------------------------------- ++ * AC97C ++ * -------------------------------------------------------------------- */ ++static struct resource atmel_ac97c0_resource[] = { ++ PBMEM(0xfff02800), ++ IRQ(29), ++}; ++DEFINE_DEV(atmel_ac97c, 0); ++DEV_CLK(pclk, atmel_ac97c0, pbb, 10); ++ ++struct platform_device *__init ++at32_add_device_ac97c(unsigned int id) ++{ ++ struct platform_device *pdev; ++ ++ switch (id) { ++ case 0: ++ pdev = &atmel_ac97c0_device; ++ select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */ ++ select_peripheral(PB(21), PERIPH_B, 0); /* SDO */ ++ select_peripheral(PB(22), PERIPH_B, 0); /* SDI */ ++ select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */ ++ break; + default: + return NULL; + } + ++ platform_device_register(pdev); ++ return pdev; ++} ++ ++/* -------------------------------------------------------------------- ++ * DAC ++ * -------------------------------------------------------------------- */ ++static struct resource abdac0_resource[] = { ++ PBMEM(0xfff02000), ++ IRQ(27), ++}; ++DEFINE_DEV(abdac, 0); ++DEV_CLK(pclk, abdac0, pbb, 8); ++static struct clk abdac0_sample_clk = { ++ .name = "sample_clk", ++ .dev = &abdac0_device.dev, ++ .mode = genclk_mode, ++ .get_rate = genclk_get_rate, ++ .set_rate = genclk_set_rate, ++ .set_parent = genclk_set_parent, ++ .index = 6, ++}; ++ ++struct platform_device *__init ++at32_add_device_abdac(unsigned int id) ++{ ++ struct platform_device *pdev; ++ ++ switch (id) { ++ case 0: ++ pdev = &abdac0_device; ++ select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */ ++ select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */ ++ select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */ ++ select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */ ++ break; ++ default: ++ return NULL; ++ } ++ ++ platform_device_register(pdev); ++ return pdev; ++} ++ ++/* -------------------------------------------------------------------- ++ * CompactFlash ++ * -------------------------------------------------------------------- */ ++static struct cf_platform_data at32_cf0_data; ++static struct resource at32_cf0_resource[] = { ++ { ++ .start = 0x04000000, ++ .end = 0x07ffffff, ++ .flags = IORESOURCE_MEM, ++ }, ++ IRQ(~0UL), ++}; ++DEFINE_DEV_DATA(at32_cf, 0); ++ ++struct platform_device *__init ++at32_add_device_cf(unsigned int id, unsigned int extint, ++ struct cf_platform_data *data) ++{ ++ struct platform_device *pdev; ++ unsigned int extint_pin; ++ ++ switch (extint) { ++ case 0: ++ extint_pin = GPIO_PIN_PB(25); ++ break; ++ case 1: ++ extint_pin = GPIO_PIN_PB(26); ++ break; ++ case 2: ++ extint_pin = GPIO_PIN_PB(27); ++ break; ++ case 3: ++ extint_pin = GPIO_PIN_PB(28); ++ break; ++ default: ++ return NULL; ++ } ++ ++ switch (id) { ++ case 0: ++ pdev = &at32_cf0_device; ++ select_peripheral(PE(19), PERIPH_A, 0); /* CFCE1 */ ++ select_peripheral(PE(20), PERIPH_A, 0); /* CFCE2 */ ++ select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 */ ++ select_peripheral(PE(23), PERIPH_A, 0); /* CFNRW */ ++ select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT */ ++ set_ebi_sfr_bits(HMATRIX_BIT(CS4A)); ++ data->cs = 4; ++ break; ++ default: ++ return NULL; ++ } ++ ++ if (data->detect_pin) ++ at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH); ++ if (data->reset_pin) ++ at32_select_gpio(data->reset_pin, 0); ++ if (data->vcc_pin) ++ at32_select_gpio(data->vcc_pin, 0); ++ ++ at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_PULLUP); ++ pdev->resource[1].start = system_manager.eim_first_irq + extint; ++ pdev->resource[1].end = pdev->resource[1].start; ++ + memcpy(pdev->dev.platform_data, data, +- sizeof(struct lcdc_platform_data)); ++ sizeof(struct cf_platform_data)); + + platform_device_register(pdev); + return pdev; +@@ -950,18 +1444,21 @@ struct clk *at32_clock_list[] = { + &pbb_clk, + &at32_sm_pclk, + &at32_intc0_pclk, ++ &hmatrix_clk, + &ebi_clk, + &hramc_clk, + &smc0_pclk, + &smc0_mck, + &pdc_hclk, + &pdc_pclk, ++ &dmaca0_hclk, + &pico_clk, + &pio0_mck, + &pio1_mck, + &pio2_mck, + &pio3_mck, + &pio4_mck, ++ &at32_systc0_pclk, + &atmel_usart0_usart, + &atmel_usart1_usart, + &atmel_usart2_usart, +@@ -972,8 +1469,18 @@ struct clk *at32_clock_list[] = { + &macb1_pclk, + &atmel_spi0_spi_clk, + &atmel_spi1_spi_clk, +- &lcdc0_hclk, +- &lcdc0_pixclk, ++ &atmel_twi0_pclk, ++ &atmel_mci0_mci_clk, ++ &atmel_lcdfb0_hck1, ++ &atmel_lcdfb0_pixclk, ++ &usba0_pclk, ++ &usba0_hclk, ++ &ssc0_pclk, ++ &ssc1_pclk, ++ &ssc2_pclk, ++ &atmel_ac97c0_pclk, ++ &abdac0_pclk, ++ &abdac0_sample_clk, + &gclk0, + &gclk1, + &gclk2, +@@ -1012,7 +1519,8 @@ void __init at32_clock_init(void) + genclk_init_parent(&gclk2); + genclk_init_parent(&gclk3); + genclk_init_parent(&gclk4); +- genclk_init_parent(&lcdc0_pixclk); ++ genclk_init_parent(&atmel_lcdfb0_pixclk); ++ genclk_init_parent(&abdac0_sample_clk); + + /* + * Turn on all clocks that have at least one user already, and +@@ -1024,6 +1532,9 @@ void __init at32_clock_init(void) + for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) { + struct clk *clk = at32_clock_list[i]; + ++ if (clk->users == 0) ++ continue; ++ + if (clk->mode == &cpu_clk_mode) + cpu_mask |= 1 << clk->index; + else if (clk->mode == &hsb_clk_mode) +diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c +index 00c4354..e8a12a3 100644 +--- a/arch/avr32/mach-at32ap/clock.c ++++ b/arch/avr32/mach-at32ap/clock.c +@@ -18,7 +18,7 @@ + + #include "clock.h" + +-static spinlock_t clk_lock = SPIN_LOCK_UNLOCKED; ++static DEFINE_SPINLOCK(clk_lock); + + struct clk *clk_get(struct device *dev, const char *id) + { +@@ -125,7 +125,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate) + ret = clk->set_rate(clk, rate, 1); + spin_unlock_irqrestore(&clk_lock, flags); + +- return (ret < 0) ? ret : 0; ++ return (ret > 0) ? ret : 0; + } + EXPORT_SYMBOL(clk_set_rate); + +diff --git a/arch/avr32/mach-at32ap/hmatrix.h b/arch/avr32/mach-at32ap/hmatrix.h +new file mode 100644 +index 0000000..d10bfb6 +--- /dev/null ++++ b/arch/avr32/mach-at32ap/hmatrix.h +@@ -0,0 +1,182 @@ ++/* ++ * Register definitions for High-Speed Bus Matrix ++ */ ++#ifndef __HMATRIX_H ++#define __HMATRIX_H ++ ++/* HMATRIX register offsets */ ++#define HMATRIX_MCFG0 0x0000 ++#define HMATRIX_MCFG1 0x0004 ++#define HMATRIX_MCFG2 0x0008 ++#define HMATRIX_MCFG3 0x000c ++#define HMATRIX_MCFG4 0x0010 ++#define HMATRIX_MCFG5 0x0014 ++#define HMATRIX_MCFG6 0x0018 ++#define HMATRIX_MCFG7 0x001c ++#define HMATRIX_MCFG8 0x0020 ++#define HMATRIX_MCFG9 0x0024 ++#define HMATRIX_MCFG10 0x0028 ++#define HMATRIX_MCFG11 0x002c ++#define HMATRIX_MCFG12 0x0030 ++#define HMATRIX_MCFG13 0x0034 ++#define HMATRIX_MCFG14 0x0038 ++#define HMATRIX_MCFG15 0x003c ++#define HMATRIX_SCFG0 0x0040 ++#define HMATRIX_SCFG1 0x0044 ++#define HMATRIX_SCFG2 0x0048 ++#define HMATRIX_SCFG3 0x004c ++#define HMATRIX_SCFG4 0x0050 ++#define HMATRIX_SCFG5 0x0054 ++#define HMATRIX_SCFG6 0x0058 ++#define HMATRIX_SCFG7 0x005c ++#define HMATRIX_SCFG8 0x0060 ++#define HMATRIX_SCFG9 0x0064 ++#define HMATRIX_SCFG10 0x0068 ++#define HMATRIX_SCFG11 0x006c ++#define HMATRIX_SCFG12 0x0070 ++#define HMATRIX_SCFG13 0x0074 ++#define HMATRIX_SCFG14 0x0078 ++#define HMATRIX_SCFG15 0x007c ++#define HMATRIX_PRAS0 0x0080 ++#define HMATRIX_PRBS0 0x0084 ++#define HMATRIX_PRAS1 0x0088 ++#define HMATRIX_PRBS1 0x008c ++#define HMATRIX_PRAS2 0x0090 ++#define HMATRIX_PRBS2 0x0094 ++#define HMATRIX_PRAS3 0x0098 ++#define HMATRIX_PRBS3 0x009c ++#define HMATRIX_PRAS4 0x00a0 ++#define HMATRIX_PRBS4 0x00a4 ++#define HMATRIX_PRAS5 0x00a8 ++#define HMATRIX_PRBS5 0x00ac ++#define HMATRIX_PRAS6 0x00b0 ++#define HMATRIX_PRBS6 0x00b4 ++#define HMATRIX_PRAS7 0x00b8 ++#define HMATRIX_PRBS7 0x00bc ++#define HMATRIX_PRAS8 0x00c0 ++#define HMATRIX_PRBS8 0x00c4 ++#define HMATRIX_PRAS9 0x00c8 ++#define HMATRIX_PRBS9 0x00cc ++#define HMATRIX_PRAS10 0x00d0 ++#define HMATRIX_PRBS10 0x00d4 ++#define HMATRIX_PRAS11 0x00d8 ++#define HMATRIX_PRBS11 0x00dc ++#define HMATRIX_PRAS12 0x00e0 ++#define HMATRIX_PRBS12 0x00e4 ++#define HMATRIX_PRAS13 0x00e8 ++#define HMATRIX_PRBS13 0x00ec ++#define HMATRIX_PRAS14 0x00f0 ++#define HMATRIX_PRBS14 0x00f4 ++#define HMATRIX_PRAS15 0x00f8 ++#define HMATRIX_PRBS15 0x00fc ++#define HMATRIX_MRCR 0x0100 ++#define HMATRIX_SFR0 0x0110 ++#define HMATRIX_SFR1 0x0114 ++#define HMATRIX_SFR2 0x0118 ++#define HMATRIX_SFR3 0x011c ++#define HMATRIX_SFR4 0x0120 ++#define HMATRIX_SFR5 0x0124 ++#define HMATRIX_SFR6 0x0128 ++#define HMATRIX_SFR7 0x012c ++#define HMATRIX_SFR8 0x0130 ++#define HMATRIX_SFR9 0x0134 ++#define HMATRIX_SFR10 0x0138 ++#define HMATRIX_SFR11 0x013c ++#define HMATRIX_SFR12 0x0140 ++#define HMATRIX_SFR13 0x0144 ++#define HMATRIX_SFR14 0x0148 ++#define HMATRIX_SFR15 0x014c ++ ++/* Bitfields in MCFGx */ ++#define HMATRIX_ULBT_OFFSET 0 ++#define HMATRIX_ULBT_SIZE 3 ++ ++/* Bitfields in SCFGx */ ++#define HMATRIX_SLOT_CYCLE_OFFSET 0 ++#define HMATRIX_SLOT_CYCLE_SIZE 8 ++#define HMATRIX_DEFMSTR_TYPE_OFFSET 16 ++#define HMATRIX_DEFMSTR_TYPE_SIZE 2 ++#define HMATRIX_FIXED_DEFMSTR_OFFSET 18 ++#define HMATRIX_FIXED_DEFMSTR_SIZE 4 ++#define HMATRIX_ARBT_OFFSET 24 ++#define HMATRIX_ARBT_SIZE 2 ++ ++/* Bitfields in PRASx */ ++#define HMATRIX_M0PR_OFFSET 0 ++#define HMATRIX_M0PR_SIZE 4 ++#define HMATRIX_M1PR_OFFSET 4 ++#define HMATRIX_M1PR_SIZE 4 ++#define HMATRIX_M2PR_OFFSET 8 ++#define HMATRIX_M2PR_SIZE 4 ++#define HMATRIX_M3PR_OFFSET 12 ++#define HMATRIX_M3PR_SIZE 4 ++#define HMATRIX_M4PR_OFFSET 16 ++#define HMATRIX_M4PR_SIZE 4 ++#define HMATRIX_M5PR_OFFSET 20 ++#define HMATRIX_M5PR_SIZE 4 ++#define HMATRIX_M6PR_OFFSET 24 ++#define HMATRIX_M6PR_SIZE 4 ++#define HMATRIX_M7PR_OFFSET 28 ++#define HMATRIX_M7PR_SIZE 4 ++ ++/* Bitfields in PRBSx */ ++#define HMATRIX_M8PR_OFFSET 0 ++#define HMATRIX_M8PR_SIZE 4 ++#define HMATRIX_M9PR_OFFSET 4 ++#define HMATRIX_M9PR_SIZE 4 ++#define HMATRIX_M10PR_OFFSET 8 ++#define HMATRIX_M10PR_SIZE 4 ++#define HMATRIX_M11PR_OFFSET 12 ++#define HMATRIX_M11PR_SIZE 4 ++#define HMATRIX_M12PR_OFFSET 16 ++#define HMATRIX_M12PR_SIZE 4 ++#define HMATRIX_M13PR_OFFSET 20 ++#define HMATRIX_M13PR_SIZE 4 ++#define HMATRIX_M14PR_OFFSET 24 ++#define HMATRIX_M14PR_SIZE 4 ++#define HMATRIX_M15PR_OFFSET 28 ++#define HMATRIX_M15PR_SIZE 4 ++ ++/* Bitfields in SFR4 */ ++#define HMATRIX_CS1A_OFFSET 1 ++#define HMATRIX_CS1A_SIZE 1 ++#define HMATRIX_CS3A_OFFSET 3 ++#define HMATRIX_CS3A_SIZE 1 ++#define HMATRIX_CS4A_OFFSET 4 ++#define HMATRIX_CS4A_SIZE 1 ++#define HMATRIX_CS5A_OFFSET 5 ++#define HMATRIX_CS5A_SIZE 1 ++#define HMATRIX_DBPUC_OFFSET 8 ++#define HMATRIX_DBPUC_SIZE 1 ++ ++/* Constants for ULBT */ ++#define HMATRIX_ULBT_INFINITE 0 ++#define HMATRIX_ULBT_SINGLE 1 ++#define HMATRIX_ULBT_FOUR_BEAT 2 ++#define HMATRIX_ULBT_EIGHT_BEAT 3 ++#define HMATRIX_ULBT_SIXTEEN_BEAT 4 ++ ++/* Constants for DEFMSTR_TYPE */ ++#define HMATRIX_DEFMSTR_TYPE_NO_DEFAULT 0 ++#define HMATRIX_DEFMSTR_TYPE_LAST_DEFAULT 1 ++#define HMATRIX_DEFMSTR_TYPE_FIXED_DEFAULT 2 ++ ++/* Constants for ARBT */ ++#define HMATRIX_ARBT_ROUND_ROBIN 0 ++#define HMATRIX_ARBT_FIXED_PRIORITY 1 ++ ++/* Bit manipulation macros */ ++#define HMATRIX_BIT(name) \ ++ (1 << HMATRIX_##name##_OFFSET) ++#define HMATRIX_BF(name,value) \ ++ (((value) & ((1 << HMATRIX_##name##_SIZE) - 1)) \ ++ << HMATRIX_##name##_OFFSET) ++#define HMATRIX_BFEXT(name,value) \ ++ (((value) >> HMATRIX_##name##_OFFSET) \ ++ & ((1 << HMATRIX_##name##_SIZE) - 1)) ++#define HMATRIX_BFINS(name,value,old) \ ++ (((old) & ~(((1 << HMATRIX_##name##_SIZE) - 1) \ ++ << HMATRIX_##name##_OFFSET)) \ ++ | HMATRIX_BF(name,value)) ++ ++#endif /* __HMATRIX_H */ +diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c +index 7691721..5e22a75 100644 +--- a/arch/avr32/mach-at32ap/hsmc.c ++++ b/arch/avr32/mach-at32ap/hsmc.c +@@ -75,12 +75,35 @@ int smc_set_configuration(int cs, const struct smc_config *config) + return -EINVAL; + } + ++ switch (config->nwait_mode) { ++ case 0: ++ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_DISABLED); ++ break; ++ case 1: ++ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_RESERVED); ++ break; ++ case 2: ++ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_FROZEN); ++ break; ++ case 3: ++ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_READY); ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ if (config->tdf_cycles) { ++ mode |= HSMC_BF(TDF_CYCLES, config->tdf_cycles); ++ } ++ + if (config->nrd_controlled) + mode |= HSMC_BIT(READ_MODE); + if (config->nwe_controlled) + mode |= HSMC_BIT(WRITE_MODE); + if (config->byte_write) + mode |= HSMC_BIT(BAT); ++ if (config->tdf_mode) ++ mode |= HSMC_BIT(TDF_MODE); + + pr_debug("smc cs%d: setup/%08x pulse/%08x cycle/%08x mode/%08x\n", + cs, setup, pulse, cycle, mode); +diff --git a/arch/avr32/mach-at32ap/time-tc.c b/arch/avr32/mach-at32ap/time-tc.c +new file mode 100644 +index 0000000..e3070bd +--- /dev/null ++++ b/arch/avr32/mach-at32ap/time-tc.c +@@ -0,0 +1,218 @@ ++/* ++ * Copyright (C) 2004-2007 Atmel Corporation ++ * ++ * Based on MIPS implementation arch/mips/kernel/time.c ++ * Copyright 2001 MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/clk.h> ++#include <linux/clocksource.h> ++#include <linux/time.h> ++#include <linux/module.h> ++#include <linux/interrupt.h> ++#include <linux/irq.h> ++#include <linux/kernel_stat.h> ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/profile.h> ++#include <linux/sysdev.h> ++#include <linux/err.h> ++ ++#include <asm/div64.h> ++#include <asm/sysreg.h> ++#include <asm/io.h> ++#include <asm/sections.h> ++ ++#include <asm/arch/time.h> ++ ++/* how many counter cycles in a jiffy? */ ++static u32 cycles_per_jiffy; ++ ++/* the count value for the next timer interrupt */ ++static u32 expirelo; ++ ++/* the I/O registers of the TC module */ ++static void __iomem *ioregs; ++ ++cycle_t read_cycle_count(void) ++{ ++ return (cycle_t)timer_read(ioregs, 0, CV); ++} ++ ++struct clocksource clocksource_avr32 = { ++ .name = "avr32", ++ .rating = 342, ++ .read = read_cycle_count, ++ .mask = CLOCKSOURCE_MASK(16), ++ .shift = 16, ++ .flags = CLOCK_SOURCE_IS_CONTINUOUS, ++}; ++ ++static void avr32_timer_ack(void) ++{ ++ u16 count = expirelo; ++ ++ /* Ack this timer interrupt and set the next one, use a u16 ++ * variable so it will wrap around correctly */ ++ count += cycles_per_jiffy; ++ expirelo = count; ++ timer_write(ioregs, 0, RC, expirelo); ++ ++ /* Check to see if we have missed any timer interrupts */ ++ count = timer_read(ioregs, 0, CV); ++ if ((count - expirelo) < 0x7fff) { ++ expirelo = count + cycles_per_jiffy; ++ timer_write(ioregs, 0, RC, expirelo); ++ } ++} ++ ++u32 avr32_hpt_read(void) ++{ ++ return timer_read(ioregs, 0, CV); ++} ++ ++static int avr32_timer_calc_div_and_set_jiffies(struct clk *pclk) ++{ ++ unsigned int cycles_max = (clocksource_avr32.mask + 1) / 2; ++ unsigned int divs[] = { 4, 8, 16, 32 }; ++ int divs_size = sizeof(divs) / sizeof(*divs); ++ int i = 0; ++ unsigned long count_hz; ++ unsigned long shift; ++ unsigned long mult; ++ int clock_div = -1; ++ u64 tmp; ++ ++ shift = clocksource_avr32.shift; ++ ++ do { ++ count_hz = clk_get_rate(pclk) / divs[i]; ++ mult = clocksource_hz2mult(count_hz, shift); ++ clocksource_avr32.mult = mult; ++ ++ tmp = TICK_NSEC; ++ tmp <<= shift; ++ tmp += mult / 2; ++ do_div(tmp, mult); ++ ++ cycles_per_jiffy = tmp; ++ } while (cycles_per_jiffy > cycles_max && ++i < divs_size); ++ ++ clock_div = i + 1; ++ ++ if (clock_div > divs_size) { ++ pr_debug("timer: could not calculate clock divider\n"); ++ return -EFAULT; ++ } ++ ++ /* Set the clock divider */ ++ timer_write(ioregs, 0, CMR, TIMER_BF(CMR_TCCLKS, clock_div)); ++ ++ return 0; ++} ++ ++int avr32_hpt_init(unsigned int count) ++{ ++ struct resource *regs; ++ struct clk *pclk; ++ int irq = -1; ++ int ret = 0; ++ ++ ret = -ENXIO; ++ ++ irq = platform_get_irq(&at32_systc0_device, 0); ++ if (irq < 0) { ++ pr_debug("timer: could not get irq\n"); ++ goto out_error; ++ } ++ ++ pclk = clk_get(&at32_systc0_device.dev, "pclk"); ++ if (IS_ERR(pclk)) { ++ pr_debug("timer: could not get clk: %ld\n", PTR_ERR(pclk)); ++ goto out_error; ++ } ++ clk_enable(pclk); ++ ++ regs = platform_get_resource(&at32_systc0_device, IORESOURCE_MEM, 0); ++ if (!regs) { ++ pr_debug("timer: could not get resource\n"); ++ goto out_error_clk; ++ } ++ ++ ioregs = ioremap(regs->start, regs->end - regs->start + 1); ++ if (!ioregs) { ++ pr_debug("timer: could not get ioregs\n"); ++ goto out_error_clk; ++ } ++ ++ ret = avr32_timer_calc_div_and_set_jiffies(pclk); ++ if (ret) ++ goto out_error_io; ++ ++ ret = setup_irq(irq, &timer_irqaction); ++ if (ret) { ++ pr_debug("timer: could not request irq %d: %d\n", ++ irq, ret); ++ goto out_error_io; ++ } ++ ++ expirelo = (timer_read(ioregs, 0, CV) / cycles_per_jiffy + 1) ++ * cycles_per_jiffy; ++ ++ /* Enable clock and interrupts on RC compare */ ++ timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_CLKEN)); ++ timer_write(ioregs, 0, IER, TIMER_BIT(IER_CPCS)); ++ /* Set cycles to first interrupt */ ++ timer_write(ioregs, 0, RC, expirelo); ++ ++ printk(KERN_INFO "timer: AT32AP system timer/counter at 0x%p irq %d\n", ++ ioregs, irq); ++ ++ return 0; ++ ++out_error_io: ++ iounmap(ioregs); ++out_error_clk: ++ clk_put(pclk); ++out_error: ++ return ret; ++} ++ ++int avr32_hpt_start(void) ++{ ++ timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_SWTRG)); ++ return 0; ++} ++ ++irqreturn_t timer_interrupt(int irq, void *dev_id) ++{ ++ unsigned int sr = timer_read(ioregs, 0, SR); ++ ++ if (sr & TIMER_BIT(SR_CPCS)) { ++ /* ack timer interrupt and try to set next interrupt */ ++ avr32_timer_ack(); ++ ++ /* ++ * Call the generic timer interrupt handler ++ */ ++ write_seqlock(&xtime_lock); ++ do_timer(1); ++ write_sequnlock(&xtime_lock); ++ ++ /* ++ * In UP mode, we call local_timer_interrupt() to do profiling ++ * and process accounting. ++ * ++ * SMP is not supported yet. ++ */ ++ local_timer_interrupt(irq, dev_id); ++ ++ return IRQ_HANDLED; ++ } ++ ++ return IRQ_NONE; ++} +diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c +index b68d669..099212d 100644 +--- a/arch/avr32/mm/dma-coherent.c ++++ b/arch/avr32/mm/dma-coherent.c +@@ -112,16 +112,21 @@ void dma_free_coherent(struct device *dev, size_t size, + } + EXPORT_SYMBOL(dma_free_coherent); + +-#if 0 + void *dma_alloc_writecombine(struct device *dev, size_t size, + dma_addr_t *handle, gfp_t gfp) + { + struct page *page; ++ dma_addr_t phys; + + page = __dma_alloc(dev, size, handle, gfp); ++ if (!page) ++ return NULL; ++ ++ phys = page_to_phys(page); ++ *handle = phys; + + /* Now, map the page into P3 with write-combining turned on */ +- return __ioremap(page_to_phys(page), size, _PAGE_BUFFER); ++ return __ioremap(phys, size, _PAGE_BUFFER); + } + EXPORT_SYMBOL(dma_alloc_writecombine); + +@@ -132,8 +137,7 @@ void dma_free_writecombine(struct device *dev, size_t size, + + iounmap(cpu_addr); + +- page = bus_to_page(handle); ++ page = phys_to_page(handle); + __dma_free(dev, size, page, handle); + } + EXPORT_SYMBOL(dma_free_writecombine); +-#endif +diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c +index 6785572..11941d8 100644 +--- a/arch/avr32/mm/fault.c ++++ b/arch/avr32/mm/fault.c +@@ -12,73 +12,46 @@ + #include <linux/mm.h> + #include <linux/module.h> + #include <linux/pagemap.h> ++#include <linux/kprobes.h> + + #include <asm/kdebug.h> + #include <asm/mmu_context.h> + #include <asm/sysreg.h> +-#include <asm/uaccess.h> + #include <asm/tlb.h> +- +-#ifdef DEBUG +-static void dump_code(unsigned long pc) +-{ +- char *p = (char *)pc; +- char val; +- int i; +- +- +- printk(KERN_DEBUG "Code:"); +- for (i = 0; i < 16; i++) { +- if (__get_user(val, p + i)) +- break; +- printk(" %02x", val); +- } +- printk("\n"); +-} +-#endif ++#include <asm/uaccess.h> + + #ifdef CONFIG_KPROBES +-ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain); +- +-/* Hook to register for page fault notifications */ +-int register_page_fault_notifier(struct notifier_block *nb) ++static inline int notify_page_fault(struct pt_regs *regs, int trap) + { +- return atomic_notifier_chain_register(¬ify_page_fault_chain, nb); +-} ++ int ret = 0; + +-int unregister_page_fault_notifier(struct notifier_block *nb) +-{ +- return atomic_notifier_chain_unregister(¬ify_page_fault_chain, nb); +-} ++ if (!user_mode(regs)) { ++ if (kprobe_running() && kprobe_fault_handler(regs, trap)) ++ ret = 1; ++ } + +-static inline int notify_page_fault(enum die_val val, struct pt_regs *regs, +- int trap, int sig) +-{ +- struct die_args args = { +- .regs = regs, +- .trapnr = trap, +- }; +- return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args); ++ return ret; + } + #else +-static inline int notify_page_fault(enum die_val val, struct pt_regs *regs, +- int trap, int sig) ++static inline int notify_page_fault(struct pt_regs *regs, int trap) + { +- return NOTIFY_DONE; ++ return 0; + } + #endif + ++int exception_trace = 1; ++ + /* + * This routine handles page faults. It determines the address and the + * problem, and then passes it off to one of the appropriate routines. + * + * ecr is the Exception Cause Register. Possible values are: +- * 5: Page not found (instruction access) + * 6: Protection fault (instruction access) +- * 12: Page not found (read access) +- * 13: Page not found (write access) +- * 14: Protection fault (read access) +- * 15: Protection fault (write access) ++ * 15: Protection fault (read access) ++ * 16: Protection fault (write access) ++ * 20: Page not found (instruction access) ++ * 24: Page not found (read access) ++ * 28: Page not found (write access) + */ + asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs) + { +@@ -88,10 +61,11 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs) + const struct exception_table_entry *fixup; + unsigned long address; + unsigned long page; +- int writeaccess = 0; ++ int writeaccess; ++ long signr; ++ int code; + +- if (notify_page_fault(DIE_PAGE_FAULT, regs, +- ecr, SIGSEGV) == NOTIFY_STOP) ++ if (notify_page_fault(regs, ecr)) + return; + + address = sysreg_read(TLBEAR); +@@ -99,6 +73,9 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs) + tsk = current; + mm = tsk->mm; + ++ signr = SIGSEGV; ++ code = SEGV_MAPERR; ++ + /* + * If we're in an interrupt or have no user context, we must + * not take the fault... +@@ -125,7 +102,9 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs) + * can handle it... + */ + good_area: +- //pr_debug("good area: vm_flags = 0x%lx\n", vma->vm_flags); ++ code = SEGV_ACCERR; ++ writeaccess = 0; ++ + switch (ecr) { + case ECR_PROTECTION_X: + case ECR_TLB_MISS_X: +@@ -176,46 +155,24 @@ survive: + * map. Fix it, but check if it's kernel or user first... + */ + bad_area: +- pr_debug("Bad area [%s:%u]: addr %08lx, ecr %lu\n", +- tsk->comm, tsk->pid, address, ecr); +- + up_read(&mm->mmap_sem); + + if (user_mode(regs)) { +- /* Hmm...we have to pass address and ecr somehow... */ +- /* tsk->thread.address = address; +- tsk->thread.error_code = ecr; */ +-#ifdef DEBUG +- show_regs(regs); +- dump_code(regs->pc); +- +- page = sysreg_read(PTBR); +- printk("ptbr = %08lx", page); +- if (page) { +- page = ((unsigned long *)page)[address >> 22]; +- printk(" pgd = %08lx", page); +- if (page & _PAGE_PRESENT) { +- page &= PAGE_MASK; +- address &= 0x003ff000; +- page = ((unsigned long *)__va(page))[address >> PAGE_SHIFT]; +- printk(" pte = %08lx\n", page); +- } +- } +-#endif +- pr_debug("Sending SIGSEGV to PID %d...\n", +- tsk->pid); +- force_sig(SIGSEGV, tsk); ++ if (exception_trace && printk_ratelimit()) ++ printk("%s%s[%d]: segfault at %08lx pc %08lx " ++ "sp %08lx ecr %lu\n", ++ is_init(tsk) ? KERN_EMERG : KERN_INFO, ++ tsk->comm, tsk->pid, address, regs->pc, ++ regs->sp, ecr); ++ _exception(SIGSEGV, regs, code, address); + return; + } + + no_context: +- pr_debug("No context\n"); +- + /* Are we prepared to handle this kernel fault? */ + fixup = search_exception_tables(regs->pc); + if (fixup) { + regs->pc = fixup->fixup; +- pr_debug("Found fixup at %08lx\n", fixup->fixup); + return; + } + +@@ -230,7 +187,6 @@ no_context: + printk(KERN_ALERT + "Unable to handle kernel paging request"); + printk(" at virtual address %08lx\n", address); +- printk(KERN_ALERT "pc = %08lx\n", regs->pc); + + page = sysreg_read(PTBR); + printk(KERN_ALERT "ptbr = %08lx", page); +@@ -241,20 +197,20 @@ no_context: + page &= PAGE_MASK; + address &= 0x003ff000; + page = ((unsigned long *)__va(page))[address >> PAGE_SHIFT]; +- printk(" pte = %08lx\n", page); ++ printk(" pte = %08lx", page); + } + } +- die("\nOops", regs, ecr); +- do_exit(SIGKILL); ++ printk("\n"); ++ die("Kernel access of bad area", regs, signr); ++ return; + + /* + * We ran out of memory, or some other thing happened to us + * that made us unable to handle the page fault gracefully. + */ + out_of_memory: +- printk("Out of memory\n"); + up_read(&mm->mmap_sem); +- if (current->pid == 1) { ++ if (is_init(current)) { + yield(); + down_read(&mm->mmap_sem); + goto survive; +@@ -267,21 +223,20 @@ out_of_memory: + do_sigbus: + up_read(&mm->mmap_sem); + +- /* +- * Send a sigbus, regardless of whether we were in kernel or +- * user mode. +- */ +- /* address, error_code, trap_no, ... */ +-#ifdef DEBUG +- show_regs(regs); +- dump_code(regs->pc); +-#endif +- pr_debug("Sending SIGBUS to PID %d...\n", tsk->pid); +- force_sig(SIGBUS, tsk); +- + /* Kernel mode? Handle exceptions or die */ ++ signr = SIGBUS; ++ code = BUS_ADRERR; + if (!user_mode(regs)) + goto no_context; ++ ++ if (exception_trace) ++ printk("%s%s[%d]: bus error at %08lx pc %08lx " ++ "sp %08lx ecr %lu\n", ++ is_init(tsk) ? KERN_EMERG : KERN_INFO, ++ tsk->comm, tsk->pid, address, regs->pc, ++ regs->sp, ecr); ++ ++ _exception(SIGBUS, regs, BUS_ADRERR, address); + } + + asmlinkage void do_bus_error(unsigned long addr, int write_access, +@@ -292,8 +247,7 @@ asmlinkage void do_bus_error(unsigned long addr, int write_access, + addr, write_access ? "write" : "read"); + printk(KERN_INFO "DTLB dump:\n"); + dump_dtlb(); +- die("Bus Error", regs, write_access); +- do_exit(SIGKILL); ++ die("Bus Error", regs, SIGKILL); + } + + /* +diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c +index 70da689..82cf708 100644 +--- a/arch/avr32/mm/init.c ++++ b/arch/avr32/mm/init.c +@@ -10,11 +10,9 @@ + #include <linux/mm.h> + #include <linux/swap.h> + #include <linux/init.h> +-#include <linux/initrd.h> + #include <linux/mmzone.h> + #include <linux/bootmem.h> + #include <linux/pagemap.h> +-#include <linux/pfn.h> + #include <linux/nodemask.h> + + #include <asm/page.h> +@@ -78,242 +76,6 @@ void show_mem(void) + printk ("%d pages swap cached\n", cached); + } + +-static void __init print_memory_map(const char *what, +- struct tag_mem_range *mem) +-{ +- printk ("%s:\n", what); +- for (; mem; mem = mem->next) { +- printk (" %08lx - %08lx\n", +- (unsigned long)mem->addr, +- (unsigned long)(mem->addr + mem->size)); +- } +-} +- +-#define MAX_LOWMEM HIGHMEM_START +-#define MAX_LOWMEM_PFN PFN_DOWN(MAX_LOWMEM) +- +-/* +- * Sort a list of memory regions in-place by ascending address. +- * +- * We're using bubble sort because we only have singly linked lists +- * with few elements. +- */ +-static void __init sort_mem_list(struct tag_mem_range **pmem) +-{ +- int done; +- struct tag_mem_range **a, **b; +- +- if (!*pmem) +- return; +- +- do { +- done = 1; +- a = pmem, b = &(*pmem)->next; +- while (*b) { +- if ((*a)->addr > (*b)->addr) { +- struct tag_mem_range *tmp; +- tmp = (*b)->next; +- (*b)->next = *a; +- *a = *b; +- *b = tmp; +- done = 0; +- } +- a = &(*a)->next; +- b = &(*a)->next; +- } +- } while (!done); +-} +- +-/* +- * Find a free memory region large enough for storing the +- * bootmem bitmap. +- */ +-static unsigned long __init +-find_bootmap_pfn(const struct tag_mem_range *mem) +-{ +- unsigned long bootmap_pages, bootmap_len; +- unsigned long node_pages = PFN_UP(mem->size); +- unsigned long bootmap_addr = mem->addr; +- struct tag_mem_range *reserved = mem_reserved; +- struct tag_mem_range *ramdisk = mem_ramdisk; +- unsigned long kern_start = virt_to_phys(_stext); +- unsigned long kern_end = virt_to_phys(_end); +- +- bootmap_pages = bootmem_bootmap_pages(node_pages); +- bootmap_len = bootmap_pages << PAGE_SHIFT; +- +- /* +- * Find a large enough region without reserved pages for +- * storing the bootmem bitmap. We can take advantage of the +- * fact that all lists have been sorted. +- * +- * We have to check explicitly reserved regions as well as the +- * kernel image and any RAMDISK images... +- * +- * Oh, and we have to make sure we don't overwrite the taglist +- * since we're going to use it until the bootmem allocator is +- * fully up and running. +- */ +- while (1) { +- if ((bootmap_addr < kern_end) && +- ((bootmap_addr + bootmap_len) > kern_start)) +- bootmap_addr = kern_end; +- +- while (reserved && +- (bootmap_addr >= (reserved->addr + reserved->size))) +- reserved = reserved->next; +- +- if (reserved && +- ((bootmap_addr + bootmap_len) >= reserved->addr)) { +- bootmap_addr = reserved->addr + reserved->size; +- continue; +- } +- +- while (ramdisk && +- (bootmap_addr >= (ramdisk->addr + ramdisk->size))) +- ramdisk = ramdisk->next; +- +- if (!ramdisk || +- ((bootmap_addr + bootmap_len) < ramdisk->addr)) +- break; +- +- bootmap_addr = ramdisk->addr + ramdisk->size; +- } +- +- if ((PFN_UP(bootmap_addr) + bootmap_len) >= (mem->addr + mem->size)) +- return ~0UL; +- +- return PFN_UP(bootmap_addr); +-} +- +-void __init setup_bootmem(void) +-{ +- unsigned bootmap_size; +- unsigned long first_pfn, bootmap_pfn, pages; +- unsigned long max_pfn, max_low_pfn; +- unsigned long kern_start = virt_to_phys(_stext); +- unsigned long kern_end = virt_to_phys(_end); +- unsigned node = 0; +- struct tag_mem_range *bank, *res; +- +- sort_mem_list(&mem_phys); +- sort_mem_list(&mem_reserved); +- +- print_memory_map("Physical memory", mem_phys); +- print_memory_map("Reserved memory", mem_reserved); +- +- nodes_clear(node_online_map); +- +- if (mem_ramdisk) { +-#ifdef CONFIG_BLK_DEV_INITRD +- initrd_start = (unsigned long)__va(mem_ramdisk->addr); +- initrd_end = initrd_start + mem_ramdisk->size; +- +- print_memory_map("RAMDISK images", mem_ramdisk); +- if (mem_ramdisk->next) +- printk(KERN_WARNING +- "Warning: Only the first RAMDISK image " +- "will be used\n"); +- sort_mem_list(&mem_ramdisk); +-#else +- printk(KERN_WARNING "RAM disk image present, but " +- "no initrd support in kernel!\n"); +-#endif +- } +- +- if (mem_phys->next) +- printk(KERN_WARNING "Only using first memory bank\n"); +- +- for (bank = mem_phys; bank; bank = NULL) { +- first_pfn = PFN_UP(bank->addr); +- max_low_pfn = max_pfn = PFN_DOWN(bank->addr + bank->size); +- bootmap_pfn = find_bootmap_pfn(bank); +- if (bootmap_pfn > max_pfn) +- panic("No space for bootmem bitmap!\n"); +- +- if (max_low_pfn > MAX_LOWMEM_PFN) { +- max_low_pfn = MAX_LOWMEM_PFN; +-#ifndef CONFIG_HIGHMEM +- /* +- * Lowmem is memory that can be addressed +- * directly through P1/P2 +- */ +- printk(KERN_WARNING +- "Node %u: Only %ld MiB of memory will be used.\n", +- node, MAX_LOWMEM >> 20); +- printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n"); +-#else +-#error HIGHMEM is not supported by AVR32 yet +-#endif +- } +- +- /* Initialize the boot-time allocator with low memory only. */ +- bootmap_size = init_bootmem_node(NODE_DATA(node), bootmap_pfn, +- first_pfn, max_low_pfn); +- +- printk("Node %u: bdata = %p, bdata->node_bootmem_map = %p\n", +- node, NODE_DATA(node)->bdata, +- NODE_DATA(node)->bdata->node_bootmem_map); +- +- /* +- * Register fully available RAM pages with the bootmem +- * allocator. +- */ +- pages = max_low_pfn - first_pfn; +- free_bootmem_node (NODE_DATA(node), PFN_PHYS(first_pfn), +- PFN_PHYS(pages)); +- +- /* +- * Reserve space for the kernel image (if present in +- * this node)... +- */ +- if ((kern_start >= PFN_PHYS(first_pfn)) && +- (kern_start < PFN_PHYS(max_pfn))) { +- printk("Node %u: Kernel image %08lx - %08lx\n", +- node, kern_start, kern_end); +- reserve_bootmem_node(NODE_DATA(node), kern_start, +- kern_end - kern_start); +- } +- +- /* ...the bootmem bitmap... */ +- reserve_bootmem_node(NODE_DATA(node), +- PFN_PHYS(bootmap_pfn), +- bootmap_size); +- +- /* ...any RAMDISK images... */ +- for (res = mem_ramdisk; res; res = res->next) { +- if (res->addr > PFN_PHYS(max_pfn)) +- break; +- +- if (res->addr >= PFN_PHYS(first_pfn)) { +- printk("Node %u: RAMDISK %08lx - %08lx\n", +- node, +- (unsigned long)res->addr, +- (unsigned long)(res->addr + res->size)); +- reserve_bootmem_node(NODE_DATA(node), +- res->addr, res->size); +- } +- } +- +- /* ...and any other reserved regions. */ +- for (res = mem_reserved; res; res = res->next) { +- if (res->addr > PFN_PHYS(max_pfn)) +- break; +- +- if (res->addr >= PFN_PHYS(first_pfn)) { +- printk("Node %u: Reserved %08lx - %08lx\n", +- node, +- (unsigned long)res->addr, +- (unsigned long)(res->addr + res->size)); +- reserve_bootmem_node(NODE_DATA(node), +- res->addr, res->size); +- } +- } +- +- node_set_online(node); +- } +-} +- + /* + * paging_init() sets up the page tables + * +diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig +index e812aa1..84d9847 100644 +--- a/drivers/char/watchdog/Kconfig ++++ b/drivers/char/watchdog/Kconfig +@@ -183,6 +183,26 @@ config PNX4008_WATCHDOG + + Say N if you are unsure. + ++# AVR32 Architecture ++ ++config AT32AP700X_WDT ++ tristate "AT32AP700x watchdog" ++ depends on WATCHDOG && CPU_AT32AP7000 ++ help ++ Watchdog timer embedded into AT32AP700x devices. This will reboot ++ your system when the timeout is reached. ++ ++config AT32AP700X_WDT_TIMEOUT ++ int "Timeout value for AT32AP700x watchdog" ++ depends on AT32AP700X_WDT ++ default "2" ++ range 1 2 ++ help ++ Sets the timeout value for the watchdog in AT32AP700x devices. ++ Limited by hardware to be 1 or 2 seconds. ++ ++ Set to 2 seconds by default. ++ + # X86 (i386 + ia64 + x86_64) Architecture + + config ACQUIRE_WDT +diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile +index 2cd8ff8..8b2a530 100644 +--- a/drivers/char/watchdog/Makefile ++++ b/drivers/char/watchdog/Makefile +@@ -35,6 +35,9 @@ obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o + obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o + obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o + ++# AVR32 Architecture ++obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o ++ + # X86 (i386 + ia64 + x86_64) Architecture + obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o + obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o +diff --git a/drivers/char/watchdog/at32ap700x_wdt.c b/drivers/char/watchdog/at32ap700x_wdt.c +new file mode 100644 +index 0000000..789456d +--- /dev/null ++++ b/drivers/char/watchdog/at32ap700x_wdt.c +@@ -0,0 +1,312 @@ ++/* ++ * Watchdog driver for Atmel AT32AP700X devices ++ * ++ * Copyright (C) 2005-2006 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/init.h> ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/miscdevice.h> ++#include <linux/fs.h> ++#include <linux/platform_device.h> ++#include <linux/watchdog.h> ++ ++#include <asm/uaccess.h> ++#include <asm/io.h> ++ ++#define TIMEOUT_MIN 1 ++#define TIMEOUT_DEFAULT CONFIG_AT32AP700X_WDT_TIMEOUT ++#define TIMEOUT_MAX 2 ++ ++/* Watchdog registers and write/read macro */ ++#define WDT_CTRL 0x00 ++#define WDT_CTRL_EN 0 ++#define WDT_CTRL_PSEL 8 ++#define WDT_CTRL_KEY 24 ++ ++#define WDT_CLR 0x04 ++ ++#define WDT_BIT(name) (1 << WDT_##name) ++#define WDT_BF(name,value) ((value) << WDT_##name) ++ ++#define wdt_readl(dev,reg) \ ++ __raw_readl((dev)->regs + WDT_##reg) ++#define wdt_writel(dev,reg,value) \ ++ __raw_writel((value), (dev)->regs + WDT_##reg) ++ ++struct wdt_at32ap700x { ++ void __iomem *regs; ++ int timeout; ++ int users; ++}; ++ ++static struct wdt_at32ap700x *wdt; ++ ++/* ++ * Disable the watchdog. ++ */ ++static void inline at32_wdt_stop(void) ++{ ++ unsigned long psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f); ++ wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55)); ++ wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa)); ++} ++ ++/* ++ * Enable and reset the watchdog. ++ */ ++static void inline at32_wdt_start(void) ++{ ++ /* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */ ++ unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe; ++ ++ wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN) ++ | WDT_BF(CTRL_PSEL, psel) ++ | WDT_BF(CTRL_KEY, 0x55)); ++ wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN) ++ | WDT_BF(CTRL_PSEL, psel) ++ | WDT_BF(CTRL_KEY, 0xaa)); ++} ++ ++/* ++ * Pat the watchdog timer. ++ */ ++static void inline at32_wdt_pat(void) ++{ ++ wdt_writel(wdt, CLR, 0x42); ++} ++ ++/* ++ * Watchdog device is opened, and watchdog starts running. ++ */ ++static int at32_wdt_open(struct inode *inode, struct file *file) ++{ ++ if (test_and_set_bit(1, &wdt->users)) ++ return -EBUSY; ++ ++ at32_wdt_start(); ++ return nonseekable_open(inode, file); ++} ++ ++/* ++ * Close the watchdog device. If CONFIG_WATCHDOG_NOWAYOUT is _not_ defined then ++ * the watchdog is also disabled. ++ */ ++static int at32_wdt_close(struct inode *inode, struct file *file) ++{ ++#ifndef CONFIG_WATCHDOG_NOWAYOUT ++ at32_wdt_stop(); ++#endif ++ clear_bit(1, &wdt->users); ++ return 0; ++} ++ ++/* ++ * Change the watchdog time interval. ++ */ ++static int at32_wdt_settimeout(int time) ++{ ++ /* ++ * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is ++ * 2 ^ 16 allowing up to 2 seconds timeout. ++ */ ++ if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX)) ++ return -EINVAL; ++ ++ /* Set new watchdog time. It will be used when at32_wdt_start() is called. */ ++ wdt->timeout = time; ++ return 0; ++} ++ ++static struct watchdog_info at32_wdt_info = { ++ .identity = "at32ap700x watchdog", ++ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, ++}; ++ ++/* ++ * Handle commands from user-space. ++ */ ++static int at32_wdt_ioctl(struct inode *inode, struct file *file, ++ unsigned int cmd, unsigned long arg) ++{ ++ int ret = -ENOTTY; ++ int time; ++ void __user *argp = (void __user *)arg; ++ int __user *p = argp; ++ ++ switch(cmd) { ++ case WDIOC_KEEPALIVE: ++ at32_wdt_pat(); ++ ret = 0; ++ break; ++ case WDIOC_GETSUPPORT: ++ ret = copy_to_user(argp, &at32_wdt_info, ++ sizeof(at32_wdt_info)) ? -EFAULT : 0; ++ break; ++ case WDIOC_SETTIMEOUT: ++ ret = get_user(time, p); ++ if (ret) ++ break; ++ ret = at32_wdt_settimeout(time); ++ if (ret) ++ break; ++ /* Enable new time value */ ++ at32_wdt_start(); ++ /* fall through */ ++ case WDIOC_GETTIMEOUT: ++ ret = put_user(wdt->timeout, p); ++ break; ++ case WDIOC_GETSTATUS: /* fall through */ ++ case WDIOC_GETBOOTSTATUS: ++ ret = put_user(0, p); ++ break; ++ case WDIOC_SETOPTIONS: ++ ret = get_user(time, p); ++ if (ret) ++ break; ++ if (time & WDIOS_DISABLECARD) ++ at32_wdt_stop(); ++ if (time & WDIOS_ENABLECARD) ++ at32_wdt_start(); ++ ret = 0; ++ break; ++ } ++ ++ return ret; ++} ++ ++static ssize_t at32_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) ++{ ++ at32_wdt_pat(); ++ return len; ++} ++ ++static const struct file_operations at32_wdt_fops = { ++ .owner = THIS_MODULE, ++ .llseek = no_llseek, ++ .ioctl = at32_wdt_ioctl, ++ .open = at32_wdt_open, ++ .release = at32_wdt_close, ++ .write = at32_wdt_write, ++}; ++ ++static struct miscdevice at32_wdt_miscdev = { ++ .minor = WATCHDOG_MINOR, ++ .name = "watchdog", ++ .fops = &at32_wdt_fops, ++}; ++ ++static int __init at32_wdt_probe(struct platform_device *pdev) ++{ ++ struct resource *regs; ++ int ret; ++ ++ wdt = kmalloc(sizeof(struct wdt_at32ap700x), GFP_KERNEL); ++ if (!wdt) { ++ ret = -ENOMEM; ++ goto out; ++ } ++ ++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!regs) { ++ pr_debug(KERN_ERR "wdt: no mmio resource defined for WDT\n"); ++ ret = -ENXIO; ++ goto out; ++ } ++ ++ wdt->regs = ioremap(regs->start, regs->end - regs->start + 1); ++ wdt->users = 0; ++ ++ if (at32_wdt_settimeout(TIMEOUT_DEFAULT)) { ++ at32_wdt_settimeout(TIMEOUT_MAX); ++ pr_info("at32_wdt: timeout invalid, set to %d sec.\n", ++ TIMEOUT_MAX); ++ } ++ ++ if (at32_wdt_miscdev.parent) ++ return -EBUSY; ++ at32_wdt_miscdev.parent = &pdev->dev; ++ ++ ret = misc_register(&at32_wdt_miscdev); ++ if (ret) ++ return ret; ++ ++ printk(KERN_INFO "Atmel WDT for AT32AP700X at %08lx\n", ++ (unsigned long)wdt->regs); ++ return 0; ++ ++out: ++ if (wdt) ++ kfree(wdt); ++ return ret; ++} ++ ++static int __exit at32_wdt_remove(struct platform_device *pdev) ++{ ++ int ret; ++ ++ ret = misc_deregister(&at32_wdt_miscdev); ++ if (!ret) ++ at32_wdt_miscdev.parent = NULL; ++ ++ if (wdt) ++ kfree(wdt); ++ ++ return ret; ++} ++ ++static void at32_wdt_shutdown(struct platform_device *pdev) ++{ ++ at32_wdt_stop(); ++} ++ ++#ifdef CONFIG_PM ++static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message) ++{ ++ at32_wdt_stop(); ++ return 0; ++} ++ ++static int at32_wdt_resume(struct platform_device *pdev) ++{ ++ if (wdt->users) ++ at32_wdt_start(); ++ return 0; ++} ++#endif ++ ++static struct platform_driver at32_wdt_driver = { ++ .remove = __exit_p(at32_wdt_remove), ++#ifdef CONFIG_PM ++ .suspend = at32_wdt_suspend, ++ .resume = at32_wdt_resume, ++#endif ++ .driver = { ++ .name = "wdt", ++ .owner = THIS_MODULE, ++ }, ++ .shutdown = at32_wdt_shutdown, ++}; ++ ++static int __init at32_wdt_init(void) ++{ ++ return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe); ++} ++module_init(at32_wdt_init); ++ ++static void __exit at32_wdt_exit(void) ++{ ++ platform_driver_unregister(&at32_wdt_driver); ++} ++module_exit(at32_wdt_exit); ++ ++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); ++MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X"); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig +index ece31d2..a77c24b 100644 +--- a/drivers/i2c/busses/Kconfig ++++ b/drivers/i2c/busses/Kconfig +@@ -5,6 +5,26 @@ + menu "I2C Hardware Bus support" + depends on I2C + ++config I2C_ATMELTWI ++ tristate "Atmel TWI/I2C" ++ depends on I2C ++ help ++ Atmel on-chip TWI controller. Say Y if you have an AT32 or ++ AT91-based device and want to use its built-in TWI ++ functionality. Atmel's TWI is compatible with Philips' I2C ++ protocol. If in doubt, say NO ++ ++config I2C_ATMELTWI_BAUDRATE ++ prompt "Atmel TWI baudrate" ++ depends on I2C_ATMELTWI ++ int ++ default 100000 ++ help ++ Set the TWI/I2C baudrate. This will alter the default value. A ++ different baudrate can be set by using a module parameter as well. If ++ no parameter is provided when loading, this is the value that will be ++ used. ++ + config I2C_ALI1535 + tristate "ALI 1535" + depends on I2C && PCI +@@ -102,6 +122,14 @@ config I2C_ELEKTOR + This support is also available as a module. If so, the module + will be called i2c-elektor. + ++config I2C_GPIO ++ tristate "GPIO-based bitbanging I2C" ++ depends on GENERIC_GPIO ++ select I2C_ALGOBIT ++ help ++ This is a very simple bitbanging I2C driver utilizing the ++ arch-neutral GPIO API to control the SCL and SDA lines. ++ + config I2C_HYDRA + tristate "CHRP Apple Hydra Mac I/O I2C interface" + depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL +diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile +index 290b540..604fe49 100644 +--- a/drivers/i2c/busses/Makefile ++++ b/drivers/i2c/busses/Makefile +@@ -11,6 +11,7 @@ obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o + obj-$(CONFIG_I2C_AT91) += i2c-at91.o + obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o + obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o ++obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o + obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o + obj-$(CONFIG_I2C_I801) += i2c-i801.o + obj-$(CONFIG_I2C_I810) += i2c-i810.o +@@ -48,6 +49,7 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o + obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o + obj-$(CONFIG_SCx200_ACB) += scx200_acb.o + obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o ++obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o + + ifeq ($(CONFIG_I2C_DEBUG_BUS),y) + EXTRA_CFLAGS += -DDEBUG +diff --git a/drivers/i2c/busses/atmeltwi.h b/drivers/i2c/busses/atmeltwi.h +new file mode 100644 +index 0000000..8502ea6 +--- /dev/null ++++ b/drivers/i2c/busses/atmeltwi.h +@@ -0,0 +1,117 @@ ++/* ++ * Register definitions for the Atmel Two-Wire Interface ++ */ ++ ++#ifndef __ASM_AVR32_TWI_H__ ++#define __ASM_AVR32_TWI_H__ ++ ++/* TWI register offsets */ ++#define TWI_CR 0x0000 ++#define TWI_MMR 0x0004 ++#define TWI_SMR 0x0008 ++#define TWI_IADR 0x000c ++#define TWI_CWGR 0x0010 ++#define TWI_SR 0x0020 ++#define TWI_IER 0x0024 ++#define TWI_IDR 0x0028 ++#define TWI_IMR 0x002c ++#define TWI_RHR 0x0030 ++#define TWI_THR 0x0034 ++ ++/* Bitfields in CR */ ++#define TWI_START_OFFSET 0 ++#define TWI_START_SIZE 1 ++#define TWI_STOP_OFFSET 1 ++#define TWI_STOP_SIZE 1 ++#define TWI_MSEN_OFFSET 2 ++#define TWI_MSEN_SIZE 1 ++#define TWI_MSDIS_OFFSET 3 ++#define TWI_MSDIS_SIZE 1 ++#define TWI_SVEN_OFFSET 4 ++#define TWI_SVEN_SIZE 1 ++#define TWI_SVDIS_OFFSET 5 ++#define TWI_SVDIS_SIZE 1 ++#define TWI_SWRST_OFFSET 7 ++#define TWI_SWRST_SIZE 1 ++ ++/* Bitfields in MMR */ ++#define TWI_IADRSZ_OFFSET 8 ++#define TWI_IADRSZ_SIZE 2 ++#define TWI_MREAD_OFFSET 12 ++#define TWI_MREAD_SIZE 1 ++#define TWI_DADR_OFFSET 16 ++#define TWI_DADR_SIZE 7 ++ ++/* Bitfields in SMR */ ++#define TWI_SADR_OFFSET 16 ++#define TWI_SADR_SIZE 7 ++ ++/* Bitfields in IADR */ ++#define TWI_IADR_OFFSET 0 ++#define TWI_IADR_SIZE 24 ++ ++/* Bitfields in CWGR */ ++#define TWI_CLDIV_OFFSET 0 ++#define TWI_CLDIV_SIZE 8 ++#define TWI_CHDIV_OFFSET 8 ++#define TWI_CHDIV_SIZE 8 ++#define TWI_CKDIV_OFFSET 16 ++#define TWI_CKDIV_SIZE 3 ++ ++/* Bitfields in SR */ ++#define TWI_TXCOMP_OFFSET 0 ++#define TWI_TXCOMP_SIZE 1 ++#define TWI_RXRDY_OFFSET 1 ++#define TWI_RXRDY_SIZE 1 ++#define TWI_TXRDY_OFFSET 2 ++#define TWI_TXRDY_SIZE 1 ++#define TWI_SVDIR_OFFSET 3 ++#define TWI_SVDIR_SIZE 1 ++#define TWI_SVACC_OFFSET 4 ++#define TWI_SVACC_SIZE 1 ++#define TWI_GCACC_OFFSET 5 ++#define TWI_GCACC_SIZE 1 ++#define TWI_OVRE_OFFSET 6 ++#define TWI_OVRE_SIZE 1 ++#define TWI_UNRE_OFFSET 7 ++#define TWI_UNRE_SIZE 1 ++#define TWI_NACK_OFFSET 8 ++#define TWI_NACK_SIZE 1 ++#define TWI_ARBLST_OFFSET 9 ++#define TWI_ARBLST_SIZE 1 ++ ++/* Bitfields in RHR */ ++#define TWI_RXDATA_OFFSET 0 ++#define TWI_RXDATA_SIZE 8 ++ ++/* Bitfields in THR */ ++#define TWI_TXDATA_OFFSET 0 ++#define TWI_TXDATA_SIZE 8 ++ ++/* Constants for IADRSZ */ ++#define TWI_IADRSZ_NO_ADDR 0 ++#define TWI_IADRSZ_ONE_BYTE 1 ++#define TWI_IADRSZ_TWO_BYTES 2 ++#define TWI_IADRSZ_THREE_BYTES 3 ++ ++/* Bit manipulation macros */ ++#define TWI_BIT(name) \ ++ (1 << TWI_##name##_OFFSET) ++#define TWI_BF(name,value) \ ++ (((value) & ((1 << TWI_##name##_SIZE) - 1)) \ ++ << TWI_##name##_OFFSET) ++#define TWI_BFEXT(name,value) \ ++ (((value) >> TWI_##name##_OFFSET) \ ++ & ((1 << TWI_##name##_SIZE) - 1)) ++#define TWI_BFINS(name,value,old) \ ++ (((old) & ~(((1 << TWI_##name##_SIZE) - 1) \ ++ << TWI_##name##_OFFSET)) \ ++ | TWI_BF(name,value)) ++ ++/* Register access macros */ ++#define twi_readl(port,reg) \ ++ __raw_readl((port)->regs + TWI_##reg) ++#define twi_writel(port,reg,value) \ ++ __raw_writel((value), (port)->regs + TWI_##reg) ++ ++#endif /* __ASM_AVR32_TWI_H__ */ +diff --git a/drivers/i2c/busses/i2c-atmeltwi.c b/drivers/i2c/busses/i2c-atmeltwi.c +new file mode 100644 +index 0000000..3418465 +--- /dev/null ++++ b/drivers/i2c/busses/i2c-atmeltwi.c +@@ -0,0 +1,348 @@ ++/* ++ * i2c Support for Atmel's Two-Wire Interface (TWI) ++ * ++ * Based on the work of Copyright (C) 2004 Rick Bronson ++ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com> ++ * Ported to AVR32 and heavily modified by Espen Krangnes <ekrangnes at atmel.com> ++ * ++ * Copyright (C) 2006 Atmel Corporation ++ * ++ * Borrowed heavily from the original work by: ++ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++ ++#include <linux/err.h> ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/slab.h> ++#include <linux/types.h> ++#include <linux/delay.h> ++#include <linux/i2c.h> ++#include <linux/init.h> ++#include <linux/clk.h> ++#include <linux/interrupt.h> ++#include <linux/irq.h> ++#include <linux/platform_device.h> ++#include <linux/completion.h> ++#include <asm/io.h> ++#include <linux/time.h> ++#include "atmeltwi.h" ++ ++static unsigned int baudrate = CONFIG_I2C_ATMELTWI_BAUDRATE; ++module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP); ++MODULE_PARM_DESC(baudrate, "The TWI baudrate"); ++ ++ ++struct atmel_twi { ++ void __iomem *regs; ++ struct i2c_adapter adapter; ++ struct clk *pclk; ++ spinlock_t lock; ++ struct completion comp; ++ u32 intmask; ++ u8 *buf; ++ u8 len; ++ u8 acks_left; ++ unsigned int irq; ++ ++}; ++#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter) ++ ++/* ++ * Initialize the TWI hardware registers. ++ */ ++static int __devinit twi_hwinit(struct atmel_twi *twi) ++{ ++ unsigned long cdiv, ckdiv=0; ++ ++ twi_writel(twi, IDR, ~0UL); ++ twi_writel(twi, CR, TWI_BIT(SWRST)); /*Reset peripheral*/ ++ twi_readl(twi, SR); ++ ++ cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4; ++ ++ while (cdiv > 255) { ++ ckdiv++; ++ cdiv = cdiv >> 1; ++ } ++ ++ if (ckdiv > 7) ++ return -EINVAL; ++ else ++ twi_writel(twi, CWGR, (TWI_BF(CKDIV, ckdiv) ++ | TWI_BF(CHDIV, cdiv) ++ | TWI_BF(CLDIV, cdiv))); ++ return 0; ++} ++ ++/* ++ * Waits for the i2c status register to set the specified bitmask ++ * Returns 0 if timed out (~100ms). ++ */ ++static short twi_wait_for_completion(struct atmel_twi *twi, ++ u32 mask) ++{ ++ int timeout = msecs_to_jiffies(100); ++ ++ twi->intmask = mask; ++ init_completion(&twi->comp); ++ ++ twi_writel(twi, IER, mask); ++ ++ if(!wait_for_completion_timeout(&twi->comp, timeout)) ++ return -ETIMEDOUT; ++ ++ return 0; ++} ++ ++/* ++ * Generic i2c master transfer entrypoint. ++ */ ++static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) ++{ ++ struct atmel_twi *twi = to_atmel_twi(adap); ++ struct i2c_msg *pmsg; ++ int i; ++ ++ /* get first message */ ++ pmsg = msgs; ++ ++ dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num); ++ ++ for (i = 0; i < num; i++, pmsg++) { ++ ++ twi->len = pmsg->len; ++ twi->buf = pmsg->buf; ++ twi->acks_left = pmsg->len; ++ twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) | ++ (pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0)); ++ twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr)); ++ ++ dev_dbg(&adap->dev,"#%d: internal addr %d %s byte%s %s 0x%02x\n", ++ i,pmsg->len, pmsg->flags & I2C_M_RD ? "reading" : "writing", ++ pmsg->len > 1 ? "s" : "", ++ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr); ++ ++ /* enable */ ++ twi_writel(twi, CR, TWI_BIT(MSEN)); ++ ++ if (pmsg->flags & I2C_M_RD) { ++ twi_writel(twi, CR, TWI_BIT(START)); ++ if ( twi_wait_for_completion(twi,TWI_BIT(RXRDY))==-ETIMEDOUT ) { ++ dev_dbg(&adap->dev, "RXRDY timeout. Stopped with %d bytes left\n", ++ twi->acks_left); ++ return -ETIMEDOUT; ++ } ++ ++ /* Send Stop, and Wait until transfer is finished */ ++ if ( twi_wait_for_completion(twi,TWI_BIT(TXCOMP))==-ETIMEDOUT ) { ++ dev_dbg(&adap->dev, "TXCOMP timeout\n"); ++ return -ETIMEDOUT; ++ } ++ ++ } else { ++ twi_writel(twi, THR, twi->buf[0]); ++ if ( twi_wait_for_completion(twi,TWI_BIT(TXRDY))==-ETIMEDOUT ) { ++ dev_dbg(&adap->dev, "TXRDY timeout. Stopped with %d bytes left\n", ++ twi->acks_left); ++ return -ETIMEDOUT; ++ } ++ } ++ ++ /* Disable TWI interface */ ++ twi_writel(twi, CR, TWI_BIT(MSDIS)); ++ ++ } /* end cur msg */ ++ ++ return i; ++} ++ ++ ++static irqreturn_t twi_interrupt(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ struct atmel_twi *twi = dev_id; ++ int status = twi_readl(twi, SR); ++ ++ if (twi->intmask & status){ ++ if (twi->intmask & TWI_BIT(NACK)) { ++ goto nack; ++ } else if (twi->intmask & TWI_BIT(RXRDY)){ ++ twi->buf[twi->len - twi->acks_left] = twi_readl(twi,RHR); ++ if(--twi->acks_left==1) ++ twi_writel(twi, CR, TWI_BIT(STOP)); ++ if (twi->acks_left==0) ++ goto complete; ++ } else if (twi->intmask & TWI_BIT(TXRDY)) { ++ twi->acks_left--; ++ if (twi->acks_left==0) { ++ twi->intmask = TWI_BIT(TXCOMP); ++ twi_writel(twi, IER, TWI_BIT(TXCOMP)); ++ } else ++ twi_writel(twi, THR, twi->buf[twi->len - twi->acks_left]); ++ } else if (twi->intmask & TWI_BIT(TXCOMP)) { ++ goto complete; ++ } ++ } ++ ++ return IRQ_HANDLED; ++ ++nack: ++ printk(KERN_INFO "NACK received!\n"); ++ ++complete: ++ twi_writel(twi, IDR, ~0UL); ++ complete(&twi->comp); ++ ++ return IRQ_HANDLED; ++ ++} ++ ++ ++/* ++ * Return list of supported functionality. ++ */ ++static u32 twi_func(struct i2c_adapter *adapter) ++{ ++ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; ++} ++ ++/* For now, we only handle combined mode (smbus) */ ++static struct i2c_algorithm twi_algorithm = { ++ .master_xfer = twi_xfer, ++ .functionality = twi_func, ++}; ++ ++/* ++ * Main initialization routine. ++ */ ++static int __devinit twi_probe(struct platform_device *pdev) ++{ ++ struct atmel_twi *twi; ++ struct resource *regs; ++ struct clk *pclk; ++ struct i2c_adapter *adapter; ++ int rc, irq; ++ ++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!regs) ++ return -ENXIO; ++ ++ pclk = clk_get(&pdev->dev, "pclk"); ++ if (IS_ERR(pclk)) ++ return PTR_ERR(pclk); ++ clk_enable(pclk); ++ ++ rc = -ENOMEM; ++ twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL); ++ if (!twi) { ++ dev_err(&pdev->dev, "can't allocate interface!\n"); ++ goto err_alloc_twi; ++ } ++ ++ twi->pclk = pclk; ++ twi->regs = ioremap(regs->start, regs->end - regs->start + 1); ++ if (!twi->regs) ++ goto err_ioremap; ++ ++ irq = platform_get_irq(pdev,0); ++ rc = request_irq(irq, twi_interrupt, 0, "twi", twi); ++ if (rc) { ++ dev_err(&pdev->dev, "can't bind irq!\n"); ++ goto err_irq; ++ } ++ twi->irq = irq; ++ ++ rc = twi_hwinit(twi); ++ if (rc) { ++ dev_err(&pdev->dev, "Unable to set baudrate\n"); ++ goto err_hw_init; ++ } ++ ++ adapter = &twi->adapter; ++ sprintf(adapter->name, "TWI"); ++ adapter->algo = &twi_algorithm; ++ adapter->class = I2C_CLASS_HWMON; ++ adapter->dev.parent = &pdev->dev; ++ ++ platform_set_drvdata(pdev, twi); ++ ++ rc = i2c_add_adapter(adapter); ++ if (rc) { ++ dev_err(&pdev->dev, "Adapter %s registration failed\n", ++ adapter->name); ++ goto err_register; ++ } ++ ++ dev_info(&pdev->dev, "Atmel TWI i2c bus device (baudrate %dk) at 0x%08lx.\n", ++ baudrate/1000, (unsigned long)regs->start); ++ ++ return 0; ++ ++ ++err_register: ++ platform_set_drvdata(pdev, NULL); ++ ++err_hw_init: ++ free_irq(irq, twi); ++ ++err_irq: ++ iounmap(twi->regs); ++ ++err_ioremap: ++ kfree(twi); ++ ++err_alloc_twi: ++ clk_disable(pclk); ++ clk_put(pclk); ++ ++ return rc; ++} ++ ++static int __devexit twi_remove(struct platform_device *pdev) ++{ ++ struct atmel_twi *twi = platform_get_drvdata(pdev); ++ int res; ++ ++ platform_set_drvdata(pdev, NULL); ++ res = i2c_del_adapter(&twi->adapter); ++ twi_writel(twi, CR, TWI_BIT(MSDIS)); ++ iounmap(twi->regs); ++ clk_disable(twi->pclk); ++ clk_put(twi->pclk); ++ free_irq(twi->irq, twi); ++ kfree(twi); ++ ++ return res; ++} ++ ++static struct platform_driver twi_driver = { ++ .probe = twi_probe, ++ .remove = __devexit_p(twi_remove), ++ .driver = { ++ .name = "atmel_twi", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init atmel_twi_init(void) ++{ ++ return platform_driver_register(&twi_driver); ++} ++ ++static void __exit atmel_twi_exit(void) ++{ ++ platform_driver_unregister(&twi_driver); ++} ++ ++module_init(atmel_twi_init); ++module_exit(atmel_twi_exit); ++ ++MODULE_AUTHOR("Espen Krangnes"); ++MODULE_DESCRIPTION("I2C driver for Atmel TWI"); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c +new file mode 100644 +index 0000000..a7dd546 +--- /dev/null ++++ b/drivers/i2c/busses/i2c-gpio.c +@@ -0,0 +1,215 @@ ++/* ++ * Bitbanging I2C bus driver using the GPIO API ++ * ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#include <linux/i2c.h> ++#include <linux/i2c-algo-bit.h> ++#include <linux/i2c-gpio.h> ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++ ++#include <asm/gpio.h> ++ ++/* Toggle SDA by changing the direction of the pin */ ++static void i2c_gpio_setsda_dir(void *data, int state) ++{ ++ struct i2c_gpio_platform_data *pdata = data; ++ ++ if (state) ++ gpio_direction_input(pdata->sda_pin); ++ else ++ gpio_direction_output(pdata->sda_pin, 0); ++} ++ ++/* ++ * Toggle SDA by changing the output value of the pin. This is only ++ * valid for pins configured as open drain (i.e. setting the value ++ * high effectively turns off the output driver.) ++ */ ++static void i2c_gpio_setsda_val(void *data, int state) ++{ ++ struct i2c_gpio_platform_data *pdata = data; ++ ++ gpio_set_value(pdata->sda_pin, state); ++} ++ ++/* Toggle SCL by changing the direction of the pin. */ ++static void i2c_gpio_setscl_dir(void *data, int state) ++{ ++ struct i2c_gpio_platform_data *pdata = data; ++ ++ if (state) ++ gpio_direction_input(pdata->scl_pin); ++ else ++ gpio_direction_output(pdata->scl_pin, 0); ++} ++ ++/* ++ * Toggle SCL by changing the output value of the pin. This is used ++ * for pins that are configured as open drain and for output-only ++ * pins. The latter case will break the i2c protocol, but it will ++ * often work in practice. ++ */ ++static void i2c_gpio_setscl_val(void *data, int state) ++{ ++ struct i2c_gpio_platform_data *pdata = data; ++ ++ gpio_set_value(pdata->scl_pin, state); ++} ++ ++int i2c_gpio_getsda(void *data) ++{ ++ struct i2c_gpio_platform_data *pdata = data; ++ ++ return gpio_get_value(pdata->sda_pin); ++} ++ ++int i2c_gpio_getscl(void *data) ++{ ++ struct i2c_gpio_platform_data *pdata = data; ++ ++ return gpio_get_value(pdata->scl_pin); ++} ++ ++static int __init i2c_gpio_probe(struct platform_device *pdev) ++{ ++ struct i2c_gpio_platform_data *pdata; ++ struct i2c_algo_bit_data *bit_data; ++ struct i2c_adapter *adap; ++ int ret; ++ ++ pdata = pdev->dev.platform_data; ++ if (!pdata) ++ return -ENXIO; ++ ++ ret = -ENOMEM; ++ adap = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); ++ if (!adap) ++ goto err_alloc_adap; ++ bit_data = kzalloc(sizeof(struct i2c_algo_bit_data), GFP_KERNEL); ++ if (!bit_data) ++ goto err_alloc_bit_data; ++ ++ ret = gpio_request(pdata->sda_pin, "sda"); ++ if (ret) ++ goto err_request_sda; ++ ret = gpio_request(pdata->scl_pin, "scl"); ++ if (ret) ++ goto err_request_scl; ++ ++ if (pdata->sda_is_open_drain) { ++ gpio_direction_output(pdata->sda_pin, 1); ++ bit_data->setsda = i2c_gpio_setsda_val; ++ } else { ++ gpio_direction_input(pdata->sda_pin); ++ bit_data->setsda = i2c_gpio_setsda_dir; ++ } ++ ++ if (pdata->scl_is_open_drain || pdata->scl_is_output_only) { ++ gpio_direction_output(pdata->scl_pin, 1); ++ bit_data->setscl = i2c_gpio_setscl_val; ++ } else { ++ gpio_direction_input(pdata->scl_pin); ++ bit_data->setscl = i2c_gpio_setscl_dir; ++ } ++ ++ if (!pdata->scl_is_output_only) ++ bit_data->getscl = i2c_gpio_getscl; ++ bit_data->getsda = i2c_gpio_getsda; ++ ++ if (pdata->udelay) ++ bit_data->udelay = pdata->udelay; ++ else if (pdata->scl_is_output_only) ++ bit_data->udelay = 50; /* 10 kHz */ ++ else ++ bit_data->udelay = 5; /* 100 kHz */ ++ ++ if (pdata->timeout) ++ bit_data->timeout = pdata->timeout; ++ else ++ bit_data->timeout = HZ / 10; /* 100 ms */ ++ ++ bit_data->data = pdata; ++ ++ adap->owner = THIS_MODULE; ++ snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id); ++ adap->algo_data = bit_data; ++ adap->dev.parent = &pdev->dev; ++ ++ ret = i2c_bit_add_bus(adap); ++ if (ret) ++ goto err_add_bus; ++ ++ platform_set_drvdata(pdev, adap); ++ ++ dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n", ++ pdata->sda_pin, pdata->scl_pin, ++ pdata->scl_is_output_only ++ ? ", no clock stretching" : ""); ++ ++ return 0; ++ ++err_add_bus: ++ gpio_free(pdata->scl_pin); ++err_request_scl: ++ gpio_free(pdata->sda_pin); ++err_request_sda: ++ kfree(bit_data); ++err_alloc_bit_data: ++ kfree(adap); ++err_alloc_adap: ++ return ret; ++} ++ ++static int __exit i2c_gpio_remove(struct platform_device *pdev) ++{ ++ struct i2c_gpio_platform_data *pdata; ++ struct i2c_adapter *adap; ++ ++ adap = platform_get_drvdata(pdev); ++ pdata = pdev->dev.platform_data; ++ ++ i2c_del_adapter(adap); ++ gpio_free(pdata->scl_pin); ++ gpio_free(pdata->sda_pin); ++ kfree(adap->algo_data); ++ kfree(adap); ++ ++ return 0; ++} ++ ++static struct platform_driver i2c_gpio_driver = { ++ .driver = { ++ .name = "i2c-gpio", ++ .owner = THIS_MODULE, ++ }, ++ .remove = __exit_p(i2c_gpio_remove), ++}; ++ ++static int __init i2c_gpio_init(void) ++{ ++ int ret; ++ ++ ret = platform_driver_probe(&i2c_gpio_driver, i2c_gpio_probe); ++ if (ret) ++ printk(KERN_ERR "i2c-gpio: probe failed: %d\n", ret); ++ ++ return ret; ++} ++module_init(i2c_gpio_init); ++ ++static void __exit i2c_gpio_exit(void) ++{ ++ platform_driver_unregister(&i2c_gpio_driver); ++} ++module_exit(i2c_gpio_exit); ++ ++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); ++MODULE_DESCRIPTION("Platform-independent bitbanging I2C driver"); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig +index 35d998c..a3c7057 100644 +--- a/drivers/input/mouse/Kconfig ++++ b/drivers/input/mouse/Kconfig +@@ -125,4 +125,19 @@ config MOUSE_HIL + help + Say Y here to support HIL pointers. + ++config MOUSE_GPIO ++ tristate "GPIO mouse" ++ depends on GENERIC_GPIO ++ help ++ This driver simulates a mouse on GPIO lines of various CPUs (and some ++ other chips). ++ ++ Say Y here if your device has buttons or a simple joystick connected ++ directly to GPIO lines. Your board-specific setup logic must also ++ provide a platform device and platform data saying which GPIOs are ++ used. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called gpio_mouse. ++ + endif +diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile +index 21a1de6..5d0fc43 100644 +--- a/drivers/input/mouse/Makefile ++++ b/drivers/input/mouse/Makefile +@@ -13,5 +13,6 @@ obj-$(CONFIG_MOUSE_PS2) += psmouse.o + obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o + obj-$(CONFIG_MOUSE_HIL) += hil_ptr.o + obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o ++obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o + + psmouse-objs := psmouse-base.o alps.o logips2pp.o synaptics.o lifebook.o trackpoint.o +diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c +new file mode 100644 +index 0000000..b7c438e +--- /dev/null ++++ b/drivers/input/mouse/gpio_mouse.c +@@ -0,0 +1,305 @@ ++/* ++ * Driver for simulating a mouse on GPIO lines. ++ * ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/init.h> ++#include <linux/version.h> ++#include <linux/module.h> ++#include <linux/timer.h> ++#include <linux/jiffies.h> ++#include <linux/platform_device.h> ++#include <linux/input.h> ++#include <linux/gpio_mouse.h> ++ ++#include <asm/gpio.h> ++ ++struct gpio_mouse { ++ struct input_dev *input; ++ struct gpio_mouse_platform_data *gpio; ++ struct timer_list timer; ++}; ++ ++/* ++ * Timer function which is run every scan_ms ms when the device is opened. The ++ * dev input varaible is set to the the input_dev pointer. ++ */ ++static void gpio_mouse_scan(unsigned long _dev) ++{ ++ struct input_dev *input = (struct input_dev *)_dev; ++ struct gpio_mouse *gmouse = input->private; ++ struct gpio_mouse_platform_data *gpio = gmouse->gpio; ++ int x, y; ++ ++ if (gpio->bleft >= 0) ++ input_report_key(input, BTN_LEFT, ++ gpio_get_value(gpio->bleft) ^ gpio->polarity); ++ if (gpio->bmiddle >= 0) ++ input_report_key(input, BTN_MIDDLE, ++ gpio_get_value(gpio->bmiddle) ^ gpio->polarity); ++ if (gpio->bright >= 0) ++ input_report_key(input, BTN_RIGHT, ++ gpio_get_value(gpio->bright) ^ gpio->polarity); ++ ++ x = (gpio_get_value(gpio->right) ^ gpio->polarity) ++ - (gpio_get_value(gpio->left) ^ gpio->polarity); ++ y = (gpio_get_value(gpio->down) ^ gpio->polarity) ++ - (gpio_get_value(gpio->up) ^ gpio->polarity); ++ ++ input_report_rel(input, REL_X, x); ++ input_report_rel(input, REL_Y, y); ++ input_sync(input); ++ ++ mod_timer(&gmouse->timer, jiffies + msecs_to_jiffies(gpio->scan_ms)); ++} ++ ++/* Only start the timer when the device is actually in use, i.e. opened. */ ++static int gpio_mouse_open(struct input_dev *input) ++{ ++ struct gpio_mouse *gmouse = input->private; ++ struct gpio_mouse_platform_data *gpio = gmouse->gpio; ++ gmouse->timer.expires = jiffies + msecs_to_jiffies(gpio->scan_ms); ++ gmouse->timer.data = (unsigned long)input; ++ add_timer(&gmouse->timer); ++ return 0; ++} ++ ++static void gpio_mouse_close(struct input_dev *input) ++{ ++ struct gpio_mouse *gmouse = input->private; ++ del_timer_sync(&gmouse->timer); ++} ++ ++static int __init gpio_mouse_probe(struct platform_device *pdev) ++{ ++ struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data; ++ struct gpio_mouse *gmouse; ++ struct input_dev *input; ++ int ret; ++ ++ if (!pdata) { ++ dev_dbg(&pdev->dev, "no platform data\n"); ++ ret = -ENXIO; ++ goto out; ++ } ++ ++ if (pdata->up < 0 || pdata->down < 0 || pdata->right < 0 ++ || pdata->left < 0) { ++ dev_dbg(&pdev->dev, "missing GPIO for directions\n"); ++ ret = -EINVAL; ++ goto out; ++ } ++ if (pdata->scan_ms < 0) { ++ dev_dbg(&pdev->dev, "invalid scan time\n"); ++ ret = -EINVAL; ++ goto out; ++ } ++ ++ gmouse = kzalloc(sizeof(struct gpio_mouse), GFP_KERNEL); ++ if (!gmouse) { ++ dev_dbg(&pdev->dev, "not enought memory for gpio_mouse\n"); ++ ret = -ENOMEM; ++ goto out; ++ } ++ ++ /* Mouse direction, required. */ ++ ret = gpio_request(pdata->up, "gpio_mouse_up"); ++ if (ret) { ++ dev_dbg(&pdev->dev, "fail up pin\n"); ++ goto out_gpio_up; ++ } ++ ret = gpio_request(pdata->down, "gpio_mouse_down"); ++ if (ret) { ++ dev_dbg(&pdev->dev, "fail down pin\n"); ++ goto out_gpio_down; ++ } ++ ret = gpio_request(pdata->left, "gpio_mouse_left"); ++ if (ret) { ++ dev_dbg(&pdev->dev, "fail left pin\n"); ++ goto out_gpio_left; ++ } ++ ret = gpio_request(pdata->right, "gpio_mouse_right"); ++ if (ret) { ++ dev_dbg(&pdev->dev, "fail right pin\n"); ++ goto out_gpio_right; ++ } ++ ++ gpio_direction_input(pdata->up); ++ gpio_direction_input(pdata->down); ++ gpio_direction_input(pdata->left); ++ gpio_direction_input(pdata->right); ++ ++ /* Mouse buttons, not required, but should at least have bleft. */ ++ if (pdata->bleft >= 0) { ++ ret = gpio_request(pdata->bleft, "gpio_mouse_bleft"); ++ if (ret) { ++ dev_dbg(&pdev->dev, "fail bleft pin\n"); ++ goto out_gpio_bleft; ++ } ++ gpio_direction_input(pdata->bleft); ++ } else { ++ dev_dbg(&pdev->dev, "no left button defined\n"); ++ } ++ if (pdata->bmiddle >= 0) { ++ ret = gpio_request(pdata->bmiddle, "gpio_mouse_bmiddle"); ++ if (ret) { ++ dev_dbg(&pdev->dev, "fail bmiddle pin\n"); ++ goto out_gpio_bmiddle; ++ } ++ gpio_direction_input(pdata->bmiddle); ++ } ++ if (pdata->bright >= 0) { ++ ret = gpio_request(pdata->bright, "gpio_mouse_bright"); ++ if (ret) { ++ dev_dbg(&pdev->dev, "fail bright pin\n"); ++ goto out_gpio_bright; ++ } ++ gpio_direction_input(pdata->bright); ++ } ++ ++ input = input_allocate_device(); ++ if (!input) { ++ dev_dbg(&pdev->dev, "not enough memory for input device\n"); ++ ret = -ENOMEM; ++ goto out_input_allocate; ++ } ++ ++ platform_set_drvdata(pdev, input); ++ ++ input->name = pdev->name; ++ /* TODO: change to "input->dev.parent = &pdev->dev;" in the future */ ++ input->cdev.dev = &pdev->dev; ++ input->private = gmouse; ++ ++ input->id.bustype = BUS_HOST; ++ input->id.vendor = 0; ++ input->id.product = 0; ++ input->id.version = 0; ++ ++ input->evbit[0] = BIT(EV_REL); ++ if (pdata->bleft >= 0 || pdata->bmiddle >= 0 || pdata->bright >= 0) { ++ input->evbit[0] |= BIT(EV_KEY); ++ ++ if (pdata->bleft >= 0) ++ input->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT); ++ if (pdata->bmiddle >= 0) ++ input->keybit[LONG(BTN_MOUSE)] |= BIT(BTN_MIDDLE); ++ if (pdata->bright >= 0) ++ input->keybit[LONG(BTN_MOUSE)] |= BIT(BTN_RIGHT); ++ } ++ input->relbit[0] = BIT(REL_X) | BIT(REL_Y); ++ ++ input->open = gpio_mouse_open; ++ input->close = gpio_mouse_close; ++ ++ gmouse->gpio = pdata; ++ gmouse->input = input; ++ ++ /* Init the scan timer. TODO: rewrite to use input-polldev in the future */ ++ init_timer(&gmouse->timer); ++ gmouse->timer.function = gpio_mouse_scan; ++ ++ ret = input_register_device(input); ++ if (ret) { ++ dev_dbg(&pdev->dev, "could not register input device\n"); ++ goto out_reg_dev; ++ } ++ ++ dev_dbg(&pdev->dev, "%d ms scan time, buttons: %s%s%s\n", ++ pdata->scan_ms, ++ pdata->bleft < 0 ? "" : "left ", ++ pdata->bmiddle < 0 ? "" : "middle ", ++ pdata->bright < 0 ? "" : "right"); ++ ++ return 0; ++ ++out_reg_dev: ++ input_free_device(input); ++ platform_set_drvdata(pdev, NULL); ++out_input_allocate: ++ if (pdata->bright >= 0) ++ gpio_free(pdata->bright); ++out_gpio_bright: ++ if (pdata->bmiddle >= 0) ++ gpio_free(pdata->bmiddle); ++out_gpio_bmiddle: ++ if (pdata->bleft >= 0) ++ gpio_free(pdata->bleft); ++out_gpio_bleft: ++ if (pdata->right >= 0) ++ gpio_free(pdata->right); ++out_gpio_right: ++ if (pdata->left >= 0) ++ gpio_free(pdata->left); ++out_gpio_left: ++ if (pdata->down >= 0) ++ gpio_free(pdata->down); ++out_gpio_down: ++ if (pdata->up >= 0) ++ gpio_free(pdata->up); ++out_gpio_up: ++ kfree(gmouse); ++out: ++ return ret; ++} ++ ++static int __exit gpio_mouse_remove(struct platform_device *pdev) ++{ ++ struct input_dev *input = platform_get_drvdata(pdev); ++ struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data; ++ struct gpio_mouse *gmouse = input->private; ++ ++ if (input) ++ input_unregister_device(input); ++ ++ if (pdata->up >= 0) ++ gpio_free(pdata->up); ++ if (pdata->down >= 0) ++ gpio_free(pdata->down); ++ if (pdata->left >= 0) ++ gpio_free(pdata->left); ++ if (pdata->right >= 0) ++ gpio_free(pdata->right); ++ if (pdata->bleft >= 0) ++ gpio_free(pdata->bleft); ++ if (pdata->bmiddle >= 0) ++ gpio_free(pdata->bmiddle); ++ if (pdata->bright >= 0) ++ gpio_free(pdata->bright); ++ ++ if (gmouse) ++ kfree(gmouse); ++ ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++struct platform_driver gpio_mouse_device_driver = { ++ .remove = __exit_p(gpio_mouse_remove), ++ .driver = { ++ .name = "gpio_mouse", ++ } ++}; ++ ++static int __init gpio_mouse_init(void) ++{ ++ return platform_driver_probe(&gpio_mouse_device_driver, ++ gpio_mouse_probe); ++} ++module_init(gpio_mouse_init); ++ ++static void __exit gpio_mouse_exit(void) ++{ ++ platform_driver_unregister(&gpio_mouse_device_driver); ++} ++module_exit(gpio_mouse_exit); ++ ++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); ++MODULE_DESCRIPTION("GPIO mouse driver"); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig +index 80b199f..b6fb03b 100644 +--- a/drivers/misc/Kconfig ++++ b/drivers/misc/Kconfig +@@ -122,4 +122,16 @@ config SONY_LAPTOP + + Read <file:Documentation/sony-laptop.txt> for more information. + ++config ATMEL_SSC ++ tristate "Device driver for Atmel SSC peripheral" ++ depends on AVR32 || ARCH_AT91 ++ ---help--- ++ This option enables device driver support for Atmel Syncronized ++ Serial Communication peripheral (SSC). ++ ++ The SSC peripheral supports a wide variety of serial frame based ++ communications, i.e. I2S, SPI, etc. ++ ++ If unsure, say N. ++ + endmenu +diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile +index 7793ccd..03bb556 100644 +--- a/drivers/misc/Makefile ++++ b/drivers/misc/Makefile +@@ -12,3 +12,4 @@ obj-$(CONFIG_TIFM_CORE) += tifm_core.o + obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o + obj-$(CONFIG_SGI_IOC4) += ioc4.o + obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o ++obj-$(CONFIG_ATMEL_SSC) += atmel-ssc/ +diff --git a/drivers/misc/atmel-ssc/Makefile b/drivers/misc/atmel-ssc/Makefile +new file mode 100644 +index 0000000..8c45446 +--- /dev/null ++++ b/drivers/misc/atmel-ssc/Makefile +@@ -0,0 +1,3 @@ ++ ++obj-$(CONFIG_ATMEL_SSC) := ssc.o ++ +diff --git a/drivers/misc/atmel-ssc/ssc.c b/drivers/misc/atmel-ssc/ssc.c +new file mode 100644 +index 0000000..a13bd6f +--- /dev/null ++++ b/drivers/misc/atmel-ssc/ssc.c +@@ -0,0 +1,471 @@ ++/* ++ * Atmel SSC support ++ * ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/clk.h> ++#include <linux/ssc.h> ++#include <linux/err.h> ++#include <linux/mutex.h> ++ ++#include <asm/io.h> ++ ++#define MAX_NR_SSC_DEVICES 4 ++ ++DEFINE_MUTEX(user_mutex); ++ ++static struct ssc_device ssc_dev[MAX_NR_SSC_DEVICES]; ++ ++/* SSC API */ ++ ++struct ssc_device* ssc_request(unsigned int ssc_num) ++{ ++ struct ssc_device *ssc; ++ ++ ssc = &ssc_dev[ssc_num]; ++ if (!ssc) ++ return ERR_PTR(-ENODEV); ++ ++ /* Lock, check if we are taken and return BUSY if taken */ ++ mutex_lock(&user_mutex); ++ if (ssc->user) { ++ mutex_unlock(&user_mutex); ++ printk(KERN_ERR ++ "%s: attempted to request taken ssc%u module\n", ++ ssc->name, ssc_num); ++ return ERR_PTR(-EBUSY); ++ } ++ ssc->user++; ++ mutex_unlock(&user_mutex); ++ ++ /* turn on the module */ ++ clk_enable(ssc->clk); ++ ++ return ssc; ++} ++EXPORT_SYMBOL(ssc_request); ++ ++void ssc_free(struct ssc_device *ssc) ++{ ++ mutex_lock(&user_mutex); ++ if (ssc->user) { ++ ssc->user--; ++ /* turn off the module */ ++ clk_disable(ssc->clk); ++ } else { ++ printk(KERN_WARNING ++ "%s: attempted to free already free ssc module\n", ++ ssc->name); ++ } ++ mutex_unlock(&user_mutex); ++} ++EXPORT_SYMBOL(ssc_free); ++ ++int ssc_set_mode(struct ssc_device *ssc, struct ssc_mode *mode) ++{ ++ ssc_writel(ssc, CR, SSC_BIT(CR_SWRST)); ++ ++ if (!mode) ++ return -EINVAL; ++ if (mode->bauddiv % 2) ++ return -EINVAL; /* not power of 2 */ ++ ++ switch (mode->mode) { ++ case ATMEL_SSC_MODE_I2S_MASTER: ++ if (mode->data_length % 2) ++ return -EINVAL; /* not power of 2 */ ++ ++ ssc_writel(ssc, CMR, (mode->bauddiv / 2)); ++ ++ /* Continous clock output ++ * Starts on falling TF ++ * Delay 1 cycle (1 bit) ++ */ ++ ssc_writel(ssc, TCMR, SSC_BF(TCMR_CKO, 1) ++ | SSC_BF(TCMR_START, 4) ++ | SSC_BF(TCMR_STTDLY, 1) ++ | SSC_BF(TCMR_PERIOD, ++ (mode->data_length-1))); ++ /* Transmitt MSB first ++ * Transmit 2 words each transfer ++ * Frame starts on negative pulse ++ */ ++ ssc_writel(ssc, TFMR, ++ SSC_BF(TFMR_DATLEN, ++ (mode->data_length-1)) ++ | SSC_BIT(TFMR_MSBF) ++ | SSC_BF(TFMR_DATNB, 1) ++ | SSC_BF(TFMR_FSLEN, ++ (mode->data_length-1)) ++ | SSC_BF(TFMR_FSOS, 1)); ++ /* Use transmitter clock ++ * Invert clock ++ * Start on any edge on RF ++ * Delay 1 cycle (1 bit) ++ */ ++ ssc_writel(ssc, RCMR, SSC_BF(RCMR_CKS, 1) ++ | SSC_BIT(RCMR_CKI) ++ | SSC_BF(RCMR_START, 7) ++ | SSC_BF(RCMR_STTDLY, 1)); ++ /* Receive MSB first */ ++ ssc_writel(ssc, RFMR, ++ SSC_BF(RFMR_DATLEN, (mode->data_length-1)) ++ | SSC_BIT(RFMR_MSBF)); ++ break; ++ case ATMEL_SSC_MODE_I2S_SLAVE: ++ if (mode->data_length % 2) ++ return -EINVAL; /* not power of 2 */ ++ ++ ssc_writel(ssc, CMR, 0); ++ ++ /* Continous clock input on TK ++ * Starts on any TF edge ++ * Delay 1 cycle (1 bit) ++ */ ++ ssc_writel(ssc, TCMR, SSC_BF(TCMR_CKS, 2) ++ | SSC_BF(TCMR_START, 7) ++ | SSC_BF(TCMR_STTDLY, 1)); ++ /* Transmitt MSB first ++ * Transmit 2 words each transfer ++ * Frame starts on negative pulse ++ */ ++ ssc_writel(ssc, TFMR, ++ SSC_BF(TFMR_DATLEN, ++ (mode->data_length-1)) ++ | SSC_BIT(TFMR_MSBF) ++ | SSC_BF(TFMR_DATNB, 1) ++ | SSC_BF(TFMR_FSLEN, ++ (mode->data_length-1)) ++ | SSC_BF(TFMR_FSOS, 1)); ++ /* Continous clock input on RK ++ * Start on any RF edge ++ * Delay 1 cycle (1 bit) ++ */ ++ ssc_writel(ssc, RCMR, SSC_BF(RCMR_CKS, 2) ++ | SSC_BF(RCMR_START, 7) ++ | SSC_BF(RCMR_STTDLY, 1)); ++ /* Receive MSB first */ ++ ssc_writel(ssc, RFMR, ++ SSC_BF(RFMR_DATLEN, (mode->data_length-1)) ++ | SSC_BIT(RFMR_MSBF)); ++ break; ++ case ATMEL_SSC_MODE_SPI_MASTER: ++ if (mode->data_length < 8 || mode->data_length > 16) ++ return -EINVAL; ++ ++ ssc_writel(ssc, CMR, (mode->bauddiv / 2)); ++ ++ /* Clock during xfer ++ * Invert depending on SPI mode ++ * Continous clock gating ++ */ ++ ssc_writel(ssc, TCMR, SSC_BF(TCMR_CKO, 2) ++ | SSC_BF(TCMR_CKI, (mode->spi_mode % 2) ? 0 : 1) ++ | SSC_BF(TCMR_CKG, 1)); ++ /* Transmitt MSB first ++ * Frame starts on negative edge ++ */ ++ ssc_writel(ssc, TFMR, ++ SSC_BF(TFMR_DATLEN, (mode->data_length-1)) ++ | SSC_BIT(TFMR_MSBF) ++ | SSC_BF(TFMR_FSOS, 3)); ++ /* Invert depending on SPI mode ++ * Start receive on transmitt ++ */ ++ ssc_writel(ssc, RCMR, ++ SSC_BF(RCMR_CKI, (mode->spi_mode % 2) ? 0 : 1) ++ | SSC_BF(RCMR_START, 1)); ++ /* Reveice MSB first */ ++ ssc_writel(ssc, RFMR, ++ SSC_BF(RFMR_DATLEN, (mode->data_length-1)) ++ | SSC_BIT(RFMR_MSBF)); ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++EXPORT_SYMBOL(ssc_set_mode); ++ ++int ssc_set_rx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer) ++{ ++ if (xfer->data) { ++ ssc_writel(ssc, PDC_RPR, xfer->data); ++ ssc_writel(ssc, PDC_RCR, xfer->len); ++ } ++ if (xfer->next_data) { ++ ssc_writel(ssc, PDC_RNPR, xfer->next_data); ++ ssc_writel(ssc, PDC_RNCR, xfer->next_len); ++ } ++ ++ return 0; ++} ++EXPORT_SYMBOL(ssc_set_rx_buffers); ++ ++int ssc_get_rx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer) ++{ ++ xfer->data = ssc_readl(ssc, PDC_RPR); ++ xfer->len = ssc_readl(ssc, PDC_RCR); ++ xfer->next_data = ssc_readl(ssc, PDC_RNPR); ++ xfer->next_len = ssc_readl(ssc, PDC_RNCR); ++ ++ return 0; ++} ++EXPORT_SYMBOL(ssc_get_rx_buffers); ++ ++int ssc_set_tx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer) ++{ ++ if (xfer->data) { ++ ssc_writel(ssc, PDC_TPR, xfer->data); ++ ssc_writel(ssc, PDC_TCR, xfer->len); ++ } ++ if (xfer->next_data) { ++ ssc_writel(ssc, PDC_TNPR, xfer->next_data); ++ ssc_writel(ssc, PDC_TNCR, xfer->next_len); ++ } ++ ++ return 0; ++} ++EXPORT_SYMBOL(ssc_set_tx_buffers); ++ ++int ssc_get_tx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer) ++{ ++ xfer->data = ssc_readl(ssc, PDC_TPR); ++ xfer->len = ssc_readl(ssc, PDC_TCR); ++ xfer->next_data = ssc_readl(ssc, PDC_TNPR); ++ xfer->next_len = ssc_readl(ssc, PDC_TNCR); ++ ++ return 0; ++} ++EXPORT_SYMBOL(ssc_get_tx_buffers); ++ ++int ssc_enable(struct ssc_device *ssc, char tx, char rx) ++{ ++ if (tx && rx) { ++ ssc_writel(ssc, CR, SSC_BIT(CR_TXEN)|SSC_BIT(CR_RXEN)); ++ } ++ else if (tx) { ++ ssc_writel(ssc, CR, SSC_BIT(CR_TXEN)); ++ } ++ else if (rx) { ++ ssc_writel(ssc, CR, SSC_BIT(CR_RXEN)); ++ } ++ return 0; ++} ++EXPORT_SYMBOL(ssc_enable); ++ ++int ssc_enable_xfer(struct ssc_device *ssc, char tx, char rx) ++{ ++ if (tx && rx) { ++ ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTEN)|SSC_BIT(PDC_PTCR_RXTEN)); ++ } ++ else if (tx) { ++ ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTEN)); ++ } ++ else if (rx) { ++ ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_RXTEN)); ++ } ++ return 0; ++} ++EXPORT_SYMBOL(ssc_enable_xfer); ++ ++int ssc_disable(struct ssc_device *ssc, char tx, char rx) ++{ ++ if (tx && rx) { ++ ssc_writel(ssc, CR, SSC_BIT(CR_TXDIS)|SSC_BIT(CR_RXDIS)); ++ } ++ else if (tx) { ++ ssc_writel(ssc, CR, SSC_BIT(CR_TXDIS)); ++ } ++ else if (rx) { ++ ssc_writel(ssc, CR, SSC_BIT(CR_RXDIS)); ++ } ++ return 0; ++} ++EXPORT_SYMBOL(ssc_disable); ++ ++int ssc_disable_xfer(struct ssc_device *ssc, char tx, char rx) ++{ ++ if (tx && rx) { ++ ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTDIS)|SSC_BIT(PDC_PTCR_RXTDIS)); ++ } ++ else if (tx) { ++ ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTDIS)); ++ } ++ else if (rx) { ++ ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_RXTDIS)); ++ } ++ return 0; ++} ++EXPORT_SYMBOL(ssc_disable_xfer); ++ ++int ssc_enable_int(struct ssc_device *ssc, unsigned int mask) ++{ ++ long status; ++ ++ ssc_writel(ssc, IER, mask); ++ ++ status = ssc_readl(ssc, IMR); ++ ++ if (!(status & mask)) ++ return -EFAULT; ++ ++ return 0; ++} ++EXPORT_SYMBOL(ssc_enable_int); ++ ++int ssc_disable_int(struct ssc_device *ssc, unsigned int mask) ++{ ++ long status; ++ ++ ssc_writel(ssc, IDR, mask); ++ ++ status = ssc_readl(ssc, IMR); ++ ++ if (status ^ ~mask) ++ return -EFAULT; ++ ++ return 0; ++} ++EXPORT_SYMBOL(ssc_disable_int); ++ ++int ssc_get_int_mask(struct ssc_device *ssc, unsigned int *mask) ++{ ++ *mask = ssc_readl(ssc, IMR); ++ return 0; ++} ++EXPORT_SYMBOL(ssc_get_int_mask); ++ ++int ssc_clk_get_rate(struct ssc_device *ssc) ++{ ++ return clk_get_rate(ssc->clk); ++} ++EXPORT_SYMBOL(ssc_clk_get_rate); ++ ++int ssc_to_irq(struct ssc_device *ssc) ++{ ++ return ssc->irq; ++} ++EXPORT_SYMBOL(ssc_to_irq); ++ ++struct ssc_device* irq_to_ssc(unsigned int irq) ++{ ++ int i; ++ struct ssc_device *ssc; ++ ++ for (i = 0; i < MAX_NR_SSC_DEVICES; i++) { ++ ssc = &ssc_dev[i]; ++ if (ssc && ssc->irq == irq) ++ return ssc; ++ } ++ ++ return ERR_PTR(-ENXIO); ++} ++EXPORT_SYMBOL(irq_to_ssc); ++ ++/* End SSC API */ ++ ++static int __init ssc_probe(struct platform_device *pdev) ++{ ++ int retval = 0; ++ struct resource *regs; ++ struct ssc_device *ssc = NULL; ++ ++ if (pdev->id > MAX_NR_SSC_DEVICES) { ++ dev_err(&pdev->dev, "only %d SSC devices supported\n", ++ MAX_NR_SSC_DEVICES); ++ retval = -ENODEV; ++ goto out; ++ } ++ ++ ssc = &ssc_dev[pdev->id]; ++ ssc->user = 0; ++ snprintf(ssc->name, sizeof(ssc->name), "ssc%d", pdev->id); ++ ++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!regs) { ++ dev_err(&pdev->dev, "no mmio resource defined for %s\n", ++ ssc->name); ++ retval = -ENXIO; ++ goto out; ++ } ++ ++ ssc->clk = clk_get(&pdev->dev, "pclk"); ++ if (IS_ERR(ssc->clk)) { ++ dev_err(&pdev->dev, "no pclk clock defined for %s\n", ++ ssc->name); ++ retval = -ENXIO; ++ goto out; ++ } ++ ++ ssc->pdev = pdev; ++ ssc->regs = ioremap(regs->start, regs->end - regs->start + 1); ++ ++ mutex_init(&user_mutex); ++ ++ /* disable all interrupts */ ++ ssc_writel(ssc, IDR, ~0UL); ++ ssc_readl(ssc, SR); ++ ++ ssc->irq = platform_get_irq(pdev, 0); ++ if (!ssc->irq) { ++ printk(KERN_ERR "%s: no interrupt for module\n", ssc->name); ++ retval = -ENXIO; ++ goto out_unmap; ++ } ++ ++ platform_set_drvdata(pdev, ssc); ++ ++ printk(KERN_INFO "%s: Atmel SSC module at 0x%08lx (irq %d)\n", ++ ssc->name, (unsigned long)ssc->regs, ssc->irq); ++ ++ goto out; ++ ++out_unmap: ++ iounmap(ssc->regs); ++out: ++ return retval; ++} ++ ++static int __devexit ssc_remove(struct platform_device *pdev) ++{ ++ struct ssc_device *ssc = platform_get_drvdata(pdev); ++ ++ if (ssc && ssc->regs) ++ iounmap(ssc->regs); ++ if (ssc && ssc->clk) ++ clk_put(ssc->clk); ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++static struct platform_driver ssc_driver = { ++ .remove = __devexit_p(ssc_remove), ++ .driver = { ++ .name = "ssc", ++ }, ++}; ++ ++static int __init ssc_init(void) ++{ ++ return platform_driver_probe(&ssc_driver, ssc_probe); ++} ++ ++static void __exit ssc_exit(void) ++{ ++ platform_driver_unregister(&ssc_driver); ++} ++ ++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); ++MODULE_DESCRIPTION("SSC driver for AVR32 capable of I2S and SPI master (todo)"); ++MODULE_LICENSE("GPL"); ++ ++module_init(ssc_init); ++module_exit(ssc_exit); +diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig +index 12af9c7..6514159 100644 +--- a/drivers/mmc/Kconfig ++++ b/drivers/mmc/Kconfig +@@ -71,6 +71,16 @@ config MMC_OMAP + + If unsure, say N. + ++config MMC_ATMELMCI ++ tristate "Atmel Multimedia Card Interface support" ++ depends on AVR32 && MMC ++ help ++ This selects the Atmel Multimedia Card Interface. If you have ++ a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card ++ slot, say Y or M here. ++ ++ If unsure, say N. ++ + config MMC_WBSD + tristate "Winbond W83L51xD SD/MMC Card Interface support" + depends on MMC && ISA_DMA_API +diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile +index 83ffb93..caf30e0 100644 +--- a/drivers/mmc/Makefile ++++ b/drivers/mmc/Makefile +@@ -23,6 +23,7 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o + obj-$(CONFIG_MMC_AU1X) += au1xmmc.o + obj-$(CONFIG_MMC_OMAP) += omap.o + obj-$(CONFIG_MMC_AT91) += at91_mci.o ++obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o + obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o + + mmc_core-y := mmc.o mmc_sysfs.o +diff --git a/drivers/mmc/atmel-mci.c b/drivers/mmc/atmel-mci.c +new file mode 100644 +index 0000000..ebeab32 +--- /dev/null ++++ b/drivers/mmc/atmel-mci.c +@@ -0,0 +1,1218 @@ ++/* ++ * Atmel MultiMedia Card Interface driver ++ * ++ * Copyright (C) 2004-2006 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#include <linux/blkdev.h> ++#include <linux/clk.h> ++#include <linux/device.h> ++#include <linux/dma-mapping.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/ioport.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++ ++#include <linux/mmc/host.h> ++#include <linux/mmc/protocol.h> ++ ++#include <asm/dma-controller.h> ++#include <asm/io.h> ++#include <asm/arch/board.h> ++#include <asm/arch/gpio.h> ++ ++#include "atmel-mci.h" ++ ++#define DRIVER_NAME "atmel_mci" ++ ++#define MCI_CMD_ERROR_FLAGS (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | \ ++ MCI_BIT(RCRCE) | MCI_BIT(RENDE) | \ ++ MCI_BIT(RTOE)) ++#define MCI_DATA_ERROR_FLAGS (MCI_BIT(DCRCE) | MCI_BIT(DTOE) | \ ++ MCI_BIT(OVRE) | MCI_BIT(UNRE)) ++ ++enum { ++ EVENT_CMD_COMPLETE = 0, ++ EVENT_CMD_ERROR, ++ EVENT_DATA_COMPLETE, ++ EVENT_DATA_ERROR, ++ EVENT_STOP_SENT, ++ EVENT_STOP_COMPLETE, ++ EVENT_STOP_ERROR, ++ EVENT_DMA_ERROR, ++ EVENT_CARD_DETECT, ++}; ++ ++struct atmel_mci_dma { ++ struct dma_request_sg req; ++ unsigned short rx_periph_id; ++ unsigned short tx_periph_id; ++}; ++ ++struct atmel_mci { ++ struct mmc_host *mmc; ++ void __iomem *regs; ++ struct atmel_mci_dma dma; ++ ++ struct mmc_request *mrq; ++ struct mmc_command *cmd; ++ struct mmc_data *data; ++ ++ u32 stop_cmdr; ++ u32 stop_iflags; ++ ++ struct tasklet_struct tasklet; ++ unsigned long pending_events; ++ unsigned long completed_events; ++ u32 error_status; ++ ++ int present; ++ int detect_pin; ++ int wp_pin; ++ ++ unsigned long bus_hz; ++ unsigned long mapbase; ++ struct clk *mck; ++ struct platform_device *pdev; ++ ++#ifdef CONFIG_DEBUG_FS ++ struct dentry *debugfs_root; ++ struct dentry *debugfs_regs; ++ struct dentry *debugfs_req; ++ struct dentry *debugfs_pending_events; ++ struct dentry *debugfs_completed_events; ++#endif ++}; ++ ++/* Those printks take an awful lot of time... */ ++#ifndef DEBUG ++static unsigned int fmax = 15000000U; ++#else ++static unsigned int fmax = 1000000U; ++#endif ++module_param(fmax, uint, 0444); ++MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock"); ++ ++/* Test bit macros for completed events */ ++#define mci_cmd_is_complete(host) \ ++ test_bit(EVENT_CMD_COMPLETE, &host->completed_events) ++#define mci_cmd_error_is_complete(host) \ ++ test_bit(EVENT_CMD_ERROR, &host->completed_events) ++#define mci_data_is_complete(host) \ ++ test_bit(EVENT_DATA_COMPLETE, &host->completed_events) ++#define mci_data_error_is_complete(host) \ ++ test_bit(EVENT_DATA_ERROR, &host->completed_events) ++#define mci_stop_sent_is_complete(host) \ ++ test_bit(EVENT_STOP_SENT, &host->completed_events) ++#define mci_stop_is_complete(host) \ ++ test_bit(EVENT_STOP_COMPLETE, &host->completed_events) ++#define mci_stop_error_is_complete(host) \ ++ test_bit(EVENT_STOP_ERROR, &host->completed_events) ++#define mci_dma_error_is_complete(host) \ ++ test_bit(EVENT_DMA_ERROR, &host->completed_events) ++#define mci_card_detect_is_complete(host) \ ++ test_bit(EVENT_CARD_DETECT, &host->completed_events) ++ ++/* Test and clear bit macros for pending events */ ++#define mci_clear_cmd_is_pending(host) \ ++ test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events) ++#define mci_clear_cmd_error_is_pending(host) \ ++ test_and_clear_bit(EVENT_CMD_ERROR, &host->pending_events) ++#define mci_clear_data_is_pending(host) \ ++ test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events) ++#define mci_clear_data_error_is_pending(host) \ ++ test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events) ++#define mci_clear_stop_sent_is_pending(host) \ ++ test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events) ++#define mci_clear_stop_is_pending(host) \ ++ test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events) ++#define mci_clear_stop_error_is_pending(host) \ ++ test_and_clear_bit(EVENT_STOP_ERROR, &host->pending_events) ++#define mci_clear_dma_error_is_pending(host) \ ++ test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events) ++#define mci_clear_card_detect_is_pending(host) \ ++ test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events) ++ ++/* Test and set bit macros for completed events */ ++#define mci_set_cmd_is_completed(host) \ ++ test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events) ++#define mci_set_cmd_error_is_completed(host) \ ++ test_and_set_bit(EVENT_CMD_ERROR, &host->completed_events) ++#define mci_set_data_is_completed(host) \ ++ test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events) ++#define mci_set_data_error_is_completed(host) \ ++ test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events) ++#define mci_set_stop_sent_is_completed(host) \ ++ test_and_set_bit(EVENT_STOP_SENT, &host->completed_events) ++#define mci_set_stop_is_completed(host) \ ++ test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events) ++#define mci_set_stop_error_is_completed(host) \ ++ test_and_set_bit(EVENT_STOP_ERROR, &host->completed_events) ++#define mci_set_dma_error_is_completed(host) \ ++ test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events) ++#define mci_set_card_detect_is_completed(host) \ ++ test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events) ++ ++/* Set bit macros for completed events */ ++#define mci_set_cmd_complete(host) \ ++ set_bit(EVENT_CMD_COMPLETE, &host->completed_events) ++#define mci_set_cmd_error_complete(host) \ ++ set_bit(EVENT_CMD_ERROR, &host->completed_events) ++#define mci_set_data_complete(host) \ ++ set_bit(EVENT_DATA_COMPLETE, &host->completed_events) ++#define mci_set_data_error_complete(host) \ ++ set_bit(EVENT_DATA_ERROR, &host->completed_events) ++#define mci_set_stop_sent_complete(host) \ ++ set_bit(EVENT_STOP_SENT, &host->completed_events) ++#define mci_set_stop_complete(host) \ ++ set_bit(EVENT_STOP_COMPLETE, &host->completed_events) ++#define mci_set_stop_error_complete(host) \ ++ set_bit(EVENT_STOP_ERROR, &host->completed_events) ++#define mci_set_dma_error_complete(host) \ ++ set_bit(EVENT_DMA_ERROR, &host->completed_events) ++#define mci_set_card_detect_complete(host) \ ++ set_bit(EVENT_CARD_DETECT, &host->completed_events) ++ ++/* Set bit macros for pending events */ ++#define mci_set_cmd_pending(host) \ ++ set_bit(EVENT_CMD_COMPLETE, &host->pending_events) ++#define mci_set_cmd_error_pending(host) \ ++ set_bit(EVENT_CMD_ERROR, &host->pending_events) ++#define mci_set_data_pending(host) \ ++ set_bit(EVENT_DATA_COMPLETE, &host->pending_events) ++#define mci_set_data_error_pending(host) \ ++ set_bit(EVENT_DATA_ERROR, &host->pending_events) ++#define mci_set_stop_sent_pending(host) \ ++ set_bit(EVENT_STOP_SENT, &host->pending_events) ++#define mci_set_stop_pending(host) \ ++ set_bit(EVENT_STOP_COMPLETE, &host->pending_events) ++#define mci_set_stop_error_pending(host) \ ++ set_bit(EVENT_STOP_ERROR, &host->pending_events) ++#define mci_set_dma_error_pending(host) \ ++ set_bit(EVENT_DMA_ERROR, &host->pending_events) ++#define mci_set_card_detect_pending(host) \ ++ set_bit(EVENT_CARD_DETECT, &host->pending_events) ++ ++/* Clear bit macros for pending events */ ++#define mci_clear_cmd_pending(host) \ ++ clear_bit(EVENT_CMD_COMPLETE, &host->pending_events) ++#define mci_clear_cmd_error_pending(host) \ ++ clear_bit(EVENT_CMD_ERROR, &host->pending_events) ++#define mci_clear_data_pending(host) \ ++ clear_bit(EVENT_DATA_COMPLETE, &host->pending_events) ++#define mci_clear_data_error_pending(host) \ ++ clear_bit(EVENT_DATA_ERROR, &host->pending_events) ++#define mci_clear_stop_sent_pending(host) \ ++ clear_bit(EVENT_STOP_SENT, &host->pending_events) ++#define mci_clear_stop_pending(host) \ ++ clear_bit(EVENT_STOP_COMPLETE, &host->pending_events) ++#define mci_clear_stop_error_pending(host) \ ++ clear_bit(EVENT_STOP_ERROR, &host->pending_events) ++#define mci_clear_dma_error_pending(host) \ ++ clear_bit(EVENT_DMA_ERROR, &host->pending_events) ++#define mci_clear_card_detect_pending(host) \ ++ clear_bit(EVENT_CARD_DETECT, &host->pending_events) ++ ++ ++#ifdef CONFIG_DEBUG_FS ++#include <linux/debugfs.h> ++ ++#define DBG_REQ_BUF_SIZE (4096 - sizeof(unsigned int)) ++ ++struct req_dbg_data { ++ unsigned int nbytes; ++ char str[DBG_REQ_BUF_SIZE]; ++}; ++ ++static int req_dbg_open(struct inode *inode, struct file *file) ++{ ++ struct atmel_mci *host; ++ struct mmc_request *mrq; ++ struct mmc_command *cmd, *stop; ++ struct mmc_data *data; ++ struct req_dbg_data *priv; ++ char *str; ++ unsigned long n = 0; ++ ++ priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ str = priv->str; ++ ++ mutex_lock(&inode->i_mutex); ++ host = inode->i_private; ++ ++ spin_lock_irq(&host->mmc->lock); ++ mrq = host->mrq; ++ if (mrq) { ++ cmd = mrq->cmd; ++ data = mrq->data; ++ stop = mrq->stop; ++ n = snprintf(str, DBG_REQ_BUF_SIZE, ++ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n", ++ cmd->opcode, cmd->arg, cmd->flags, ++ cmd->resp[0], cmd->resp[1], cmd->resp[2], ++ cmd->resp[3], cmd->error); ++ if (n < DBG_REQ_BUF_SIZE && data) ++ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n, ++ "DATA %u * %u (%u) %x (err %u)\n", ++ data->blocks, data->blksz, ++ data->bytes_xfered, data->flags, ++ data->error); ++ if (n < DBG_REQ_BUF_SIZE && stop) ++ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n, ++ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n", ++ stop->opcode, stop->arg, stop->flags, ++ stop->resp[0], stop->resp[1], ++ stop->resp[2], stop->resp[3], ++ stop->error); ++ } ++ spin_unlock_irq(&host->mmc->lock); ++ mutex_unlock(&inode->i_mutex); ++ ++ priv->nbytes = min(n, DBG_REQ_BUF_SIZE); ++ file->private_data = priv; ++ ++ return 0; ++} ++ ++static ssize_t req_dbg_read(struct file *file, char __user *buf, ++ size_t nbytes, loff_t *ppos) ++{ ++ struct req_dbg_data *priv = file->private_data; ++ ++ return simple_read_from_buffer(buf, nbytes, ppos, ++ priv->str, priv->nbytes); ++} ++ ++static int req_dbg_release(struct inode *inode, struct file *file) ++{ ++ kfree(file->private_data); ++ return 0; ++} ++ ++static const struct file_operations req_dbg_fops = { ++ .owner = THIS_MODULE, ++ .open = req_dbg_open, ++ .llseek = no_llseek, ++ .read = req_dbg_read, ++ .release = req_dbg_release, ++}; ++ ++static int regs_dbg_open(struct inode *inode, struct file *file) ++{ ++ struct atmel_mci *host; ++ unsigned int i; ++ u32 *data; ++ int ret = -ENOMEM; ++ ++ mutex_lock(&inode->i_mutex); ++ host = inode->i_private; ++ data = kmalloc(inode->i_size, GFP_KERNEL); ++ if (!data) ++ goto out; ++ ++ spin_lock_irq(&host->mmc->lock); ++ for (i = 0; i < inode->i_size / 4; i++) ++ data[i] = __raw_readl(host->regs + i * 4); ++ spin_unlock_irq(&host->mmc->lock); ++ ++ file->private_data = data; ++ ret = 0; ++ ++out: ++ mutex_unlock(&inode->i_mutex); ++ ++ return ret; ++} ++ ++static ssize_t regs_dbg_read(struct file *file, char __user *buf, ++ size_t nbytes, loff_t *ppos) ++{ ++ struct inode *inode = file->f_dentry->d_inode; ++ int ret; ++ ++ mutex_lock(&inode->i_mutex); ++ ret = simple_read_from_buffer(buf, nbytes, ppos, ++ file->private_data, ++ file->f_dentry->d_inode->i_size); ++ mutex_unlock(&inode->i_mutex); ++ ++ return ret; ++} ++ ++static int regs_dbg_release(struct inode *inode, struct file *file) ++{ ++ kfree(file->private_data); ++ return 0; ++} ++ ++static const struct file_operations regs_dbg_fops = { ++ .owner = THIS_MODULE, ++ .open = regs_dbg_open, ++ .llseek = generic_file_llseek, ++ .read = regs_dbg_read, ++ .release = regs_dbg_release, ++}; ++ ++static void atmci_init_debugfs(struct atmel_mci *host) ++{ ++ struct mmc_host *mmc; ++ struct dentry *root, *regs; ++ struct resource *res; ++ ++ mmc = host->mmc; ++ root = debugfs_create_dir(mmc_hostname(mmc), NULL); ++ if (IS_ERR(root) || !root) ++ goto err_root; ++ host->debugfs_root = root; ++ ++ regs = debugfs_create_file("regs", 0400, root, host, ®s_dbg_fops); ++ if (!regs) ++ goto err_regs; ++ ++ res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0); ++ regs->d_inode->i_size = res->end - res->start + 1; ++ host->debugfs_regs = regs; ++ ++ host->debugfs_req = debugfs_create_file("req", 0400, root, ++ host, &req_dbg_fops); ++ if (!host->debugfs_req) ++ goto err_req; ++ ++ host->debugfs_pending_events ++ = debugfs_create_u32("pending_events", 0400, root, ++ (u32 *)&host->pending_events); ++ if (!host->debugfs_pending_events) ++ goto err_pending_events; ++ ++ host->debugfs_completed_events ++ = debugfs_create_u32("completed_events", 0400, root, ++ (u32 *)&host->completed_events); ++ if (!host->debugfs_completed_events) ++ goto err_completed_events; ++ ++ return; ++ ++err_completed_events: ++ debugfs_remove(host->debugfs_pending_events); ++err_pending_events: ++ debugfs_remove(host->debugfs_req); ++err_req: ++ debugfs_remove(host->debugfs_regs); ++err_regs: ++ debugfs_remove(host->debugfs_root); ++err_root: ++ host->debugfs_root = NULL; ++ dev_err(&host->pdev->dev, ++ "failed to initialize debugfs for %s\n", ++ mmc_hostname(mmc)); ++} ++ ++static void atmci_cleanup_debugfs(struct atmel_mci *host) ++{ ++ if (host->debugfs_root) { ++ debugfs_remove(host->debugfs_completed_events); ++ debugfs_remove(host->debugfs_pending_events); ++ debugfs_remove(host->debugfs_req); ++ debugfs_remove(host->debugfs_regs); ++ debugfs_remove(host->debugfs_root); ++ host->debugfs_root = NULL; ++ } ++} ++#else ++static inline void atmci_init_debugfs(struct atmel_mci *host) ++{ ++ ++} ++ ++static inline void atmci_cleanup_debugfs(struct atmel_mci *host) ++{ ++ ++} ++#endif /* CONFIG_DEBUG_FS */ ++ ++static inline unsigned int ns_to_clocks(struct atmel_mci *host, ++ unsigned int ns) ++{ ++ return (ns * (host->bus_hz / 1000000) + 999) / 1000; ++} ++ ++static void atmci_set_timeout(struct atmel_mci *host, ++ struct mmc_data *data) ++{ ++ static unsigned dtomul_to_shift[] = { ++ 0, 4, 7, 8, 10, 12, 16, 20 ++ }; ++ unsigned timeout; ++ unsigned dtocyc, dtomul; ++ ++ timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks; ++ ++ for (dtomul = 0; dtomul < 8; dtomul++) { ++ unsigned shift = dtomul_to_shift[dtomul]; ++ dtocyc = (timeout + (1 << shift) - 1) >> shift; ++ if (dtocyc < 15) ++ break; ++ } ++ ++ if (dtomul >= 8) { ++ dtomul = 7; ++ dtocyc = 15; ++ } ++ ++ pr_debug("%s: setting timeout to %u cycles\n", ++ mmc_hostname(host->mmc), ++ dtocyc << dtomul_to_shift[dtomul]); ++ mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul) ++ | MCI_BF(DTOCYC, dtocyc))); ++} ++ ++/* ++ * Return mask with interrupt flags to be handled for this command. ++ */ ++static u32 atmci_prepare_command(struct mmc_host *mmc, ++ struct mmc_command *cmd, ++ u32 *cmd_flags) ++{ ++ u32 cmdr; ++ u32 iflags; ++ ++ cmd->error = MMC_ERR_NONE; ++ ++ cmdr = 0; ++ BUG_ON(MCI_BFEXT(CMDNB, cmdr) != 0); ++ cmdr = MCI_BFINS(CMDNB, cmd->opcode, cmdr); ++ ++ if (cmd->flags & MMC_RSP_PRESENT) { ++ if (cmd->flags & MMC_RSP_136) ++ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT); ++ else ++ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT); ++ } ++ ++ /* ++ * This should really be MAXLAT_5 for CMD2 and ACMD41, but ++ * it's too difficult to determine whether this is an ACMD or ++ * not. Better make it 64. ++ */ ++ cmdr |= MCI_BIT(MAXLAT); ++ ++ if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN) ++ cmdr |= MCI_BIT(OPDCMD); ++ ++ iflags = MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS; ++ if (!(cmd->flags & MMC_RSP_CRC)) ++ iflags &= ~MCI_BIT(RCRCE); ++ ++ pr_debug("%s: cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n", ++ mmc_hostname(mmc), cmd->opcode, cmd->arg, cmd->flags, ++ (unsigned long)cmdr); ++ ++ *cmd_flags = cmdr; ++ return iflags; ++} ++ ++static void atmci_start_command(struct atmel_mci *host, ++ struct mmc_command *cmd, ++ u32 cmd_flags) ++{ ++ WARN_ON(host->cmd); ++ host->cmd = cmd; ++ ++ mci_writel(host, ARGR, cmd->arg); ++ mci_writel(host, CMDR, cmd_flags); ++ ++ if (cmd->data) ++ dma_start_request(host->dma.req.req.dmac, ++ host->dma.req.req.channel); ++} ++ ++/* ++ * Returns a mask of flags to be set in the command register when the ++ * command to start the transfer is to be sent. ++ */ ++static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data) ++{ ++ struct atmel_mci *host = mmc_priv(mmc); ++ u32 cmd_flags; ++ ++ WARN_ON(host->data); ++ host->data = data; ++ ++ atmci_set_timeout(host, data); ++ mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks) ++ | MCI_BF(BLKLEN, data->blksz))); ++ host->dma.req.block_size = data->blksz; ++ host->dma.req.nr_blocks = data->blocks; ++ ++ cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS); ++ if (data->flags & MMC_DATA_STREAM) ++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM); ++ else if (data->blocks > 1) ++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK); ++ else ++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK); ++ ++ if (data->flags & MMC_DATA_READ) { ++ cmd_flags |= MCI_BIT(TRDIR); ++ host->dma.req.nr_sg ++ = dma_map_sg(&host->pdev->dev, data->sg, ++ data->sg_len, DMA_FROM_DEVICE); ++ host->dma.req.periph_id = host->dma.rx_periph_id; ++ host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM; ++ host->dma.req.data_reg = host->mapbase + MCI_RDR; ++ } else { ++ host->dma.req.nr_sg ++ = dma_map_sg(&host->pdev->dev, data->sg, ++ data->sg_len, DMA_TO_DEVICE); ++ host->dma.req.periph_id = host->dma.tx_periph_id; ++ host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH; ++ host->dma.req.data_reg = host->mapbase + MCI_TDR; ++ } ++ host->dma.req.sg = data->sg; ++ ++ dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req); ++ ++ return cmd_flags; ++} ++ ++static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) ++{ ++ struct atmel_mci *host = mmc_priv(mmc); ++ struct mmc_data *data = mrq->data; ++ u32 iflags; ++ u32 cmdflags = 0; ++ ++ iflags = mci_readl(host, IMR); ++ if (iflags) ++ printk("WARNING: IMR=0x%08x\n", mci_readl(host, IMR)); ++ ++ WARN_ON(host->mrq != NULL); ++ host->mrq = mrq; ++ host->pending_events = 0; ++ host->completed_events = 0; ++ ++ iflags = atmci_prepare_command(mmc, mrq->cmd, &cmdflags); ++ ++ if (mrq->stop) { ++ BUG_ON(!data); ++ ++ host->stop_iflags = atmci_prepare_command(mmc, mrq->stop, ++ &host->stop_cmdr); ++ host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS); ++ if (!(data->flags & MMC_DATA_WRITE)) ++ host->stop_cmdr |= MCI_BIT(TRDIR); ++ if (data->flags & MMC_DATA_STREAM) ++ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM); ++ else ++ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK); ++ } ++ if (data) { ++ cmdflags |= atmci_prepare_data(mmc, data); ++ iflags |= MCI_DATA_ERROR_FLAGS; ++ } ++ ++ atmci_start_command(host, mrq->cmd, cmdflags); ++ mci_writel(host, IER, iflags); ++} ++ ++static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) ++{ ++ struct atmel_mci *host = mmc_priv(mmc); ++ ++ if (ios->clock) { ++ u32 clkdiv; ++ ++ clkdiv = host->bus_hz / (2 * ios->clock) - 1; ++ if (clkdiv > 255) ++ clkdiv = 255; ++ mci_writel(host, MR, (clkdiv ++ | MCI_BIT(WRPROOF) ++ | MCI_BIT(RDPROOF))); ++ } ++ ++ switch (ios->bus_width) { ++ case MMC_BUS_WIDTH_1: ++ mci_writel(host, SDCR, 0); ++ break; ++ case MMC_BUS_WIDTH_4: ++ mci_writel(host, SDCR, MCI_BIT(SDCBUS)); ++ break; ++ } ++ ++ switch (ios->power_mode) { ++ case MMC_POWER_OFF: ++ mci_writel(host, CR, MCI_BIT(MCIDIS)); ++ break; ++ case MMC_POWER_UP: ++ mci_writel(host, CR, MCI_BIT(SWRST)); ++ break; ++ case MMC_POWER_ON: ++ mci_writel(host, CR, MCI_BIT(MCIEN)); ++ break; ++ } ++} ++ ++static int atmci_get_ro(struct mmc_host *mmc) ++{ ++ int read_only = 0; ++ struct atmel_mci *host = mmc_priv(mmc); ++ ++ if (host->wp_pin >= 0) { ++ read_only = gpio_get_value(host->wp_pin); ++ pr_debug("%s: card is %s\n", mmc_hostname(mmc), ++ read_only ? "read-only" : "read-write"); ++ } else { ++ pr_debug("%s: no pin for checking read-only switch." ++ " Assuming write-enable.\n", mmc_hostname(mmc)); ++ } ++ ++ return read_only; ++} ++ ++static struct mmc_host_ops atmci_ops = { ++ .request = atmci_request, ++ .set_ios = atmci_set_ios, ++ .get_ro = atmci_get_ro, ++}; ++ ++static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq) ++{ ++ struct atmel_mci *host = mmc_priv(mmc); ++ ++ WARN_ON(host->cmd || host->data); ++ host->mrq = NULL; ++ ++ mmc_request_done(mmc, mrq); ++} ++ ++static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data, ++ u32 flags) ++{ ++ struct atmel_mci *host = mmc_priv(mmc); ++ ++ atmci_start_command(host, data->stop, host->stop_cmdr | flags); ++ mci_writel(host, IER, host->stop_iflags); ++} ++ ++static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data) ++{ ++ host->data = NULL; ++ dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg, ++ ((data->flags & MMC_DATA_WRITE) ++ ? DMA_TO_DEVICE : DMA_FROM_DEVICE)); ++ ++ /* ++ * Data might complete before command for very short transfers ++ * (like READ_SCR) ++ */ ++ if (mci_cmd_is_complete(host) ++ && (!data->stop || mci_stop_is_complete(host))) ++ atmci_request_end(host->mmc, data->mrq); ++} ++ ++static void atmci_command_error(struct mmc_host *mmc, ++ struct mmc_command *cmd, ++ u32 status) ++{ ++ pr_debug("%s: command error: status=0x%08x\n", ++ mmc_hostname(mmc), status); ++ ++ if (status & MCI_BIT(RTOE)) ++ cmd->error = MMC_ERR_TIMEOUT; ++ else if (status & MCI_BIT(RCRCE)) ++ cmd->error = MMC_ERR_BADCRC; ++ else ++ cmd->error = MMC_ERR_FAILED; ++} ++ ++static void atmci_tasklet_func(unsigned long priv) ++{ ++ struct mmc_host *mmc = (struct mmc_host *)priv; ++ struct atmel_mci *host = mmc_priv(mmc); ++ struct mmc_request *mrq = host->mrq; ++ struct mmc_data *data = host->data; ++ ++ pr_debug("atmci_tasklet: pending/completed/mask %lx/%lx/%x\n", ++ host->pending_events, host->completed_events, ++ mci_readl(host, IMR)); ++ ++ if (mci_clear_cmd_error_is_pending(host)) { ++ struct mmc_command *cmd; ++ ++ mci_set_cmd_error_complete(host); ++ mci_clear_cmd_pending(host); ++ cmd = host->mrq->cmd; ++ ++ if (cmd->data) { ++ dma_stop_request(host->dma.req.req.dmac, ++ host->dma.req.req.channel); ++ host->data = NULL; ++ } ++ ++ atmci_command_error(mmc, cmd, host->error_status); ++ atmci_request_end(mmc, cmd->mrq); ++ } ++ if (mci_clear_stop_error_is_pending(host)) { ++ mci_set_stop_error_complete(host); ++ mci_clear_stop_pending(host); ++ atmci_command_error(mmc, host->mrq->stop, ++ host->error_status); ++ if (!host->data) ++ atmci_request_end(mmc, host->mrq); ++ } ++ if (mci_clear_cmd_is_pending(host)) { ++ mci_set_cmd_complete(host); ++ if (!mrq->data || mci_data_is_complete(host) ++ || mci_data_error_is_complete(host)) ++ atmci_request_end(mmc, mrq); ++ } ++ if (mci_clear_stop_is_pending(host)) { ++ mci_set_stop_complete(host); ++ if (mci_data_is_complete(host) ++ || mci_data_error_is_complete(host)) ++ atmci_request_end(mmc, mrq); ++ } ++ if (mci_clear_dma_error_is_pending(host)) { ++ mci_set_dma_error_complete(host); ++ mci_clear_data_pending(host); ++ ++ /* DMA controller got bus error => invalid address */ ++ data->error = MMC_ERR_INVALID; ++ ++ printk(KERN_DEBUG "%s: dma error after %u bytes xfered\n", ++ mmc_hostname(mmc), host->data->bytes_xfered); ++ ++ if (data->stop ++ && !mci_set_stop_sent_is_completed(host)) ++ /* TODO: Check if card is still present */ ++ send_stop_cmd(host->mmc, data, 0); ++ ++ atmci_data_complete(host, data); ++ } ++ if (mci_clear_data_error_is_pending(host)) { ++ u32 status = host->error_status; ++ ++ mci_set_data_error_complete(host); ++ mci_clear_data_pending(host); ++ ++ dma_stop_request(host->dma.req.req.dmac, ++ host->dma.req.req.channel); ++ ++ printk(KERN_DEBUG "%s: data error: status=0x%08x\n", ++ mmc_hostname(host->mmc), status); ++ ++ if (status & MCI_BIT(DCRCE)) { ++ printk(KERN_DEBUG "%s: Data CRC error\n", ++ mmc_hostname(host->mmc)); ++ data->error = MMC_ERR_BADCRC; ++ } else if (status & MCI_BIT(DTOE)) { ++ printk(KERN_DEBUG "%s: Data Timeout error\n", ++ mmc_hostname(host->mmc)); ++ data->error = MMC_ERR_TIMEOUT; ++ } else { ++ printk(KERN_DEBUG "%s: Data FIFO error\n", ++ mmc_hostname(host->mmc)); ++ data->error = MMC_ERR_FIFO; ++ } ++ printk(KERN_DEBUG "%s: Bytes xfered: %u\n", ++ mmc_hostname(host->mmc), data->bytes_xfered); ++ ++ if (data->stop ++ && !mci_set_stop_sent_is_completed(host)) ++ /* TODO: Check if card is still present */ ++ send_stop_cmd(host->mmc, data, 0); ++ ++ atmci_data_complete(host, data); ++ } ++ if (mci_clear_data_is_pending(host)) { ++ mci_set_data_complete(host); ++ data->bytes_xfered = data->blocks * data->blksz; ++ atmci_data_complete(host, data); ++ } ++ if (mci_clear_card_detect_is_pending(host)) { ++ /* Reset controller if card is gone */ ++ if (!host->present) { ++ mci_writel(host, CR, MCI_BIT(SWRST)); ++ mci_writel(host, IDR, ~0UL); ++ mci_writel(host, CR, MCI_BIT(MCIEN)); ++ } ++ ++ /* Clean up queue if present */ ++ if (mrq) { ++ if (!mci_cmd_is_complete(host) ++ && !mci_cmd_error_is_complete(host)) { ++ mrq->cmd->error = MMC_ERR_TIMEOUT; ++ } ++ if (mrq->data && !mci_data_is_complete(host) ++ && !mci_data_error_is_complete(host)) { ++ dma_stop_request(host->dma.req.req.dmac, ++ host->dma.req.req.channel); ++ host->data->error = MMC_ERR_TIMEOUT; ++ atmci_data_complete(host, data); ++ } ++ if (mrq->stop && !mci_stop_is_complete(host) ++ && !mci_stop_error_is_complete(host)) { ++ mrq->stop->error = MMC_ERR_TIMEOUT; ++ } ++ ++ host->cmd = NULL; ++ atmci_request_end(mmc, mrq); ++ } ++ mmc_detect_change(host->mmc, msecs_to_jiffies(100)); ++ } ++} ++ ++static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status) ++{ ++ struct atmel_mci *host = mmc_priv(mmc); ++ struct mmc_command *cmd = host->cmd; ++ ++ /* ++ * Read the response now so that we're free to send a new ++ * command immediately. ++ */ ++ cmd->resp[0] = mci_readl(host, RSPR); ++ cmd->resp[1] = mci_readl(host, RSPR); ++ cmd->resp[2] = mci_readl(host, RSPR); ++ cmd->resp[3] = mci_readl(host, RSPR); ++ ++ mci_writel(host, IDR, MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS); ++ host->cmd = NULL; ++ ++ if (mci_stop_sent_is_complete(host)) ++ mci_set_stop_pending(host); ++ else ++ mci_set_cmd_pending(host); ++ ++ tasklet_schedule(&host->tasklet); ++} ++ ++static void atmci_xfer_complete(struct dma_request *_req) ++{ ++ struct dma_request_sg *req = to_dma_request_sg(_req); ++ struct atmel_mci_dma *dma; ++ struct atmel_mci *host; ++ struct mmc_data *data; ++ ++ dma = container_of(req, struct atmel_mci_dma, req); ++ host = container_of(dma, struct atmel_mci, dma); ++ data = host->data; ++ ++ if (data->stop && !mci_set_stop_sent_is_completed(host)) ++ send_stop_cmd(host->mmc, data, 0); ++ ++ if (data->flags & MMC_DATA_READ) { ++ mci_writel(host, IDR, MCI_DATA_ERROR_FLAGS); ++ mci_set_data_pending(host); ++ tasklet_schedule(&host->tasklet); ++ } else { ++ /* ++ * For the WRITE case, wait for NOTBUSY. This function ++ * is called when everything has been written to the ++ * controller, not when the card is done programming. ++ */ ++ mci_writel(host, IER, MCI_BIT(NOTBUSY)); ++ } ++} ++ ++static void atmci_dma_error(struct dma_request *_req) ++{ ++ struct dma_request_sg *req = to_dma_request_sg(_req); ++ struct atmel_mci_dma *dma; ++ struct atmel_mci *host; ++ ++ dma = container_of(req, struct atmel_mci_dma, req); ++ host = container_of(dma, struct atmel_mci, dma); ++ ++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY) ++ | MCI_DATA_ERROR_FLAGS)); ++ ++ mci_set_dma_error_pending(host); ++ tasklet_schedule(&host->tasklet); ++} ++ ++static irqreturn_t atmci_interrupt(int irq, void *dev_id) ++{ ++ struct mmc_host *mmc = dev_id; ++ struct atmel_mci *host = mmc_priv(mmc); ++ u32 status, mask, pending; ++ ++ spin_lock(&mmc->lock); ++ ++ status = mci_readl(host, SR); ++ mask = mci_readl(host, IMR); ++ pending = status & mask; ++ ++ do { ++ if (pending & MCI_CMD_ERROR_FLAGS) { ++ mci_writel(host, IDR, (MCI_BIT(CMDRDY) ++ | MCI_BIT(NOTBUSY) ++ | MCI_CMD_ERROR_FLAGS ++ | MCI_DATA_ERROR_FLAGS)); ++ host->error_status = status; ++ host->cmd = NULL; ++ if (mci_stop_sent_is_complete(host)) ++ mci_set_stop_error_pending(host); ++ else ++ mci_set_cmd_error_pending(host); ++ tasklet_schedule(&host->tasklet); ++ break; ++ } ++ if (pending & MCI_DATA_ERROR_FLAGS) { ++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY) ++ | MCI_DATA_ERROR_FLAGS)); ++ host->error_status = status; ++ mci_set_data_error_pending(host); ++ tasklet_schedule(&host->tasklet); ++ break; ++ } ++ if (pending & MCI_BIT(CMDRDY)) ++ atmci_cmd_interrupt(mmc, status); ++ if (pending & MCI_BIT(NOTBUSY)) { ++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY) ++ | MCI_DATA_ERROR_FLAGS)); ++ mci_set_data_pending(host); ++ tasklet_schedule(&host->tasklet); ++ } ++ ++ status = mci_readl(host, SR); ++ mask = mci_readl(host, IMR); ++ pending = status & mask; ++ } while (pending); ++ ++ spin_unlock(&mmc->lock); ++ ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t atmci_detect_change(int irq, void *dev_id) ++{ ++ struct mmc_host *mmc = dev_id; ++ struct atmel_mci *host = mmc_priv(mmc); ++ ++ int present = !gpio_get_value(irq_to_gpio(irq)); ++ ++ if (present != host->present) { ++ pr_debug("%s: card %s\n", mmc_hostname(host->mmc), ++ present ? "inserted" : "removed"); ++ host->present = present; ++ mci_set_card_detect_pending(host); ++ tasklet_schedule(&host->tasklet); ++ } ++ return IRQ_HANDLED; ++} ++ ++static int __devinit atmci_probe(struct platform_device *pdev) ++{ ++ struct mci_platform_data *board; ++ struct atmel_mci *host; ++ struct mmc_host *mmc; ++ struct resource *regs; ++ int irq; ++ int ret; ++ ++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!regs) ++ return -ENXIO; ++ irq = platform_get_irq(pdev, 0); ++ if (irq < 0) ++ return irq; ++ ++ board = pdev->dev.platform_data; ++ ++ mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev); ++ if (!mmc) ++ return -ENOMEM; ++ ++ host = mmc_priv(mmc); ++ host->pdev = pdev; ++ host->mmc = mmc; ++ if (board) { ++ host->detect_pin = board->detect_pin; ++ host->wp_pin = board->wp_pin; ++ } else { ++ host->detect_pin = -1; ++ host->detect_pin = -1; ++ } ++ ++ host->mck = clk_get(&pdev->dev, "mci_clk"); ++ if (IS_ERR(host->mck)) { ++ ret = PTR_ERR(host->mck); ++ goto out_free_host; ++ } ++ clk_enable(host->mck); ++ ++ ret = -ENOMEM; ++ host->regs = ioremap(regs->start, regs->end - regs->start + 1); ++ if (!host->regs) ++ goto out_disable_clk; ++ ++ host->bus_hz = clk_get_rate(host->mck); ++ host->mapbase = regs->start; ++ ++ mmc->ops = &atmci_ops; ++ mmc->f_min = (host->bus_hz + 511) / 512; ++ mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax); ++ mmc->ocr_avail = 0x00100000; ++ mmc->caps |= MMC_CAP_4_BIT_DATA; ++ ++ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc); ++ ++ ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc); ++ if (ret) ++ goto out_unmap; ++ ++ /* Assume card is present if we don't have a detect pin */ ++ host->present = 1; ++ if (host->detect_pin >= 0) { ++ if (gpio_request(host->detect_pin, "mmc_detect")) { ++ printk(KERN_WARNING "%s: no detect pin available\n", ++ mmc_hostname(host->mmc)); ++ host->detect_pin = -1; ++ } else { ++ host->present = !gpio_get_value(host->detect_pin); ++ } ++ } ++ if (host->wp_pin >= 0) { ++ if (gpio_request(host->wp_pin, "mmc_wp")) { ++ printk(KERN_WARNING "%s: no WP pin available\n", ++ mmc_hostname(host->mmc)); ++ host->wp_pin = -1; ++ } ++ } ++ ++ /* TODO: Get this information from platform data */ ++ ret = -ENOMEM; ++ host->dma.req.req.dmac = find_dma_controller(0); ++ if (!host->dma.req.req.dmac) { ++ printk(KERN_ERR ++ "mmci: No DMA controller available, aborting\n"); ++ goto out_free_irq; ++ } ++ ret = dma_alloc_channel(host->dma.req.req.dmac); ++ if (ret < 0) { ++ printk(KERN_ERR ++ "mmci: Unable to allocate DMA channel, aborting\n"); ++ goto out_free_irq; ++ } ++ host->dma.req.req.channel = ret; ++ host->dma.req.width = DMA_WIDTH_32BIT; ++ host->dma.req.req.xfer_complete = atmci_xfer_complete; ++ host->dma.req.req.block_complete = NULL; // atmci_block_complete; ++ host->dma.req.req.error = atmci_dma_error; ++ host->dma.rx_periph_id = 0; ++ host->dma.tx_periph_id = 1; ++ ++ mci_writel(host, CR, MCI_BIT(SWRST)); ++ mci_writel(host, IDR, ~0UL); ++ mci_writel(host, CR, MCI_BIT(MCIEN)); ++ ++ platform_set_drvdata(pdev, host); ++ ++ mmc_add_host(mmc); ++ ++ if (host->detect_pin >= 0) { ++ ret = request_irq(gpio_to_irq(host->detect_pin), ++ atmci_detect_change, ++ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, ++ DRIVER_NAME, mmc); ++ if (ret) { ++ printk(KERN_ERR ++ "%s: could not request IRQ %d for detect pin\n", ++ mmc_hostname(mmc), ++ gpio_to_irq(host->detect_pin)); ++ gpio_free(host->detect_pin); ++ host->detect_pin = -1; ++ } ++ } ++ ++ printk(KERN_INFO "%s: Atmel MCI controller at 0x%08lx irq %d\n", ++ mmc_hostname(mmc), host->mapbase, irq); ++ ++ atmci_init_debugfs(host); ++ ++ return 0; ++ ++out_free_irq: ++ if (host->detect_pin >= 0) ++ gpio_free(host->detect_pin); ++ if (host->wp_pin >= 0) ++ gpio_free(host->wp_pin); ++ free_irq(irq, mmc); ++out_unmap: ++ iounmap(host->regs); ++out_disable_clk: ++ clk_disable(host->mck); ++ clk_put(host->mck); ++out_free_host: ++ mmc_free_host(mmc); ++ return ret; ++} ++ ++static int __devexit atmci_remove(struct platform_device *pdev) ++{ ++ struct atmel_mci *host = platform_get_drvdata(pdev); ++ ++ platform_set_drvdata(pdev, NULL); ++ ++ if (host) { ++ atmci_cleanup_debugfs(host); ++ ++ if (host->detect_pin >= 0) { ++ free_irq(gpio_to_irq(host->detect_pin), host->mmc); ++ cancel_delayed_work(&host->mmc->detect); ++ gpio_free(host->detect_pin); ++ } ++ ++ mmc_remove_host(host->mmc); ++ ++ mci_writel(host, IDR, ~0UL); ++ mci_writel(host, CR, MCI_BIT(MCIDIS)); ++ mci_readl(host, SR); ++ ++ dma_release_channel(host->dma.req.req.dmac, ++ host->dma.req.req.channel); ++ ++ if (host->wp_pin >= 0) ++ gpio_free(host->wp_pin); ++ ++ free_irq(platform_get_irq(pdev, 0), host->mmc); ++ iounmap(host->regs); ++ ++ clk_disable(host->mck); ++ clk_put(host->mck); ++ ++ mmc_free_host(host->mmc); ++ } ++ return 0; ++} ++ ++static struct platform_driver atmci_driver = { ++ .probe = atmci_probe, ++ .remove = __devexit_p(atmci_remove), ++ .driver = { ++ .name = DRIVER_NAME, ++ }, ++}; ++ ++static int __init atmci_init(void) ++{ ++ return platform_driver_register(&atmci_driver); ++} ++ ++static void __exit atmci_exit(void) ++{ ++ platform_driver_unregister(&atmci_driver); ++} ++ ++module_init(atmci_init); ++module_exit(atmci_exit); ++ ++MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver"); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/mmc/atmel-mci.h b/drivers/mmc/atmel-mci.h +new file mode 100644 +index 0000000..60d15c4 +--- /dev/null ++++ b/drivers/mmc/atmel-mci.h +@@ -0,0 +1,192 @@ ++/* ++ * Atmel MultiMedia Card Interface driver ++ * ++ * Copyright (C) 2004-2006 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#ifndef __DRIVERS_MMC_ATMEL_MCI_H__ ++#define __DRIVERS_MMC_ATMEL_MCI_H__ ++ ++/* MCI register offsets */ ++#define MCI_CR 0x0000 ++#define MCI_MR 0x0004 ++#define MCI_DTOR 0x0008 ++#define MCI_SDCR 0x000c ++#define MCI_ARGR 0x0010 ++#define MCI_CMDR 0x0014 ++#define MCI_BLKR 0x0018 ++#define MCI_RSPR 0x0020 ++#define MCI_RSPR1 0x0024 ++#define MCI_RSPR2 0x0028 ++#define MCI_RSPR3 0x002c ++#define MCI_RDR 0x0030 ++#define MCI_TDR 0x0034 ++#define MCI_SR 0x0040 ++#define MCI_IER 0x0044 ++#define MCI_IDR 0x0048 ++#define MCI_IMR 0x004c ++ ++/* Bitfields in CR */ ++#define MCI_MCIEN_OFFSET 0 ++#define MCI_MCIEN_SIZE 1 ++#define MCI_MCIDIS_OFFSET 1 ++#define MCI_MCIDIS_SIZE 1 ++#define MCI_PWSEN_OFFSET 2 ++#define MCI_PWSEN_SIZE 1 ++#define MCI_PWSDIS_OFFSET 3 ++#define MCI_PWSDIS_SIZE 1 ++#define MCI_SWRST_OFFSET 7 ++#define MCI_SWRST_SIZE 1 ++ ++/* Bitfields in MR */ ++#define MCI_CLKDIV_OFFSET 0 ++#define MCI_CLKDIV_SIZE 8 ++#define MCI_PWSDIV_OFFSET 8 ++#define MCI_PWSDIV_SIZE 3 ++#define MCI_RDPROOF_OFFSET 11 ++#define MCI_RDPROOF_SIZE 1 ++#define MCI_WRPROOF_OFFSET 12 ++#define MCI_WRPROOF_SIZE 1 ++#define MCI_DMAPADV_OFFSET 14 ++#define MCI_DMAPADV_SIZE 1 ++#define MCI_BLKLEN_OFFSET 16 ++#define MCI_BLKLEN_SIZE 16 ++ ++/* Bitfields in DTOR */ ++#define MCI_DTOCYC_OFFSET 0 ++#define MCI_DTOCYC_SIZE 4 ++#define MCI_DTOMUL_OFFSET 4 ++#define MCI_DTOMUL_SIZE 3 ++ ++/* Bitfields in SDCR */ ++#define MCI_SDCSEL_OFFSET 0 ++#define MCI_SDCSEL_SIZE 4 ++#define MCI_SDCBUS_OFFSET 7 ++#define MCI_SDCBUS_SIZE 1 ++ ++/* Bitfields in ARGR */ ++#define MCI_ARG_OFFSET 0 ++#define MCI_ARG_SIZE 32 ++ ++/* Bitfields in CMDR */ ++#define MCI_CMDNB_OFFSET 0 ++#define MCI_CMDNB_SIZE 6 ++#define MCI_RSPTYP_OFFSET 6 ++#define MCI_RSPTYP_SIZE 2 ++#define MCI_SPCMD_OFFSET 8 ++#define MCI_SPCMD_SIZE 3 ++#define MCI_OPDCMD_OFFSET 11 ++#define MCI_OPDCMD_SIZE 1 ++#define MCI_MAXLAT_OFFSET 12 ++#define MCI_MAXLAT_SIZE 1 ++#define MCI_TRCMD_OFFSET 16 ++#define MCI_TRCMD_SIZE 2 ++#define MCI_TRDIR_OFFSET 18 ++#define MCI_TRDIR_SIZE 1 ++#define MCI_TRTYP_OFFSET 19 ++#define MCI_TRTYP_SIZE 2 ++ ++/* Bitfields in BLKR */ ++#define MCI_BCNT_OFFSET 0 ++#define MCI_BCNT_SIZE 16 ++ ++/* Bitfields in RSPRn */ ++#define MCI_RSP_OFFSET 0 ++#define MCI_RSP_SIZE 32 ++ ++/* Bitfields in SR/IER/IDR/IMR */ ++#define MCI_CMDRDY_OFFSET 0 ++#define MCI_CMDRDY_SIZE 1 ++#define MCI_RXRDY_OFFSET 1 ++#define MCI_RXRDY_SIZE 1 ++#define MCI_TXRDY_OFFSET 2 ++#define MCI_TXRDY_SIZE 1 ++#define MCI_BLKE_OFFSET 3 ++#define MCI_BLKE_SIZE 1 ++#define MCI_DTIP_OFFSET 4 ++#define MCI_DTIP_SIZE 1 ++#define MCI_NOTBUSY_OFFSET 5 ++#define MCI_NOTBUSY_SIZE 1 ++#define MCI_ENDRX_OFFSET 6 ++#define MCI_ENDRX_SIZE 1 ++#define MCI_ENDTX_OFFSET 7 ++#define MCI_ENDTX_SIZE 1 ++#define MCI_RXBUFF_OFFSET 14 ++#define MCI_RXBUFF_SIZE 1 ++#define MCI_TXBUFE_OFFSET 15 ++#define MCI_TXBUFE_SIZE 1 ++#define MCI_RINDE_OFFSET 16 ++#define MCI_RINDE_SIZE 1 ++#define MCI_RDIRE_OFFSET 17 ++#define MCI_RDIRE_SIZE 1 ++#define MCI_RCRCE_OFFSET 18 ++#define MCI_RCRCE_SIZE 1 ++#define MCI_RENDE_OFFSET 19 ++#define MCI_RENDE_SIZE 1 ++#define MCI_RTOE_OFFSET 20 ++#define MCI_RTOE_SIZE 1 ++#define MCI_DCRCE_OFFSET 21 ++#define MCI_DCRCE_SIZE 1 ++#define MCI_DTOE_OFFSET 22 ++#define MCI_DTOE_SIZE 1 ++#define MCI_OVRE_OFFSET 30 ++#define MCI_OVRE_SIZE 1 ++#define MCI_UNRE_OFFSET 31 ++#define MCI_UNRE_SIZE 1 ++ ++/* Constants for DTOMUL */ ++#define MCI_DTOMUL_1_CYCLE 0 ++#define MCI_DTOMUL_16_CYCLES 1 ++#define MCI_DTOMUL_128_CYCLES 2 ++#define MCI_DTOMUL_256_CYCLES 3 ++#define MCI_DTOMUL_1024_CYCLES 4 ++#define MCI_DTOMUL_4096_CYCLES 5 ++#define MCI_DTOMUL_65536_CYCLES 6 ++#define MCI_DTOMUL_1048576_CYCLES 7 ++ ++/* Constants for RSPTYP */ ++#define MCI_RSPTYP_NO_RESP 0 ++#define MCI_RSPTYP_48_BIT 1 ++#define MCI_RSPTYP_136_BIT 2 ++ ++/* Constants for SPCMD */ ++#define MCI_SPCMD_NO_SPEC_CMD 0 ++#define MCI_SPCMD_INIT_CMD 1 ++#define MCI_SPCMD_SYNC_CMD 2 ++#define MCI_SPCMD_INT_CMD 4 ++#define MCI_SPCMD_INT_RESP 5 ++ ++/* Constants for TRCMD */ ++#define MCI_TRCMD_NO_TRANS 0 ++#define MCI_TRCMD_START_TRANS 1 ++#define MCI_TRCMD_STOP_TRANS 2 ++ ++/* Constants for TRTYP */ ++#define MCI_TRTYP_BLOCK 0 ++#define MCI_TRTYP_MULTI_BLOCK 1 ++#define MCI_TRTYP_STREAM 2 ++ ++/* Bit manipulation macros */ ++#define MCI_BIT(name) \ ++ (1 << MCI_##name##_OFFSET) ++#define MCI_BF(name,value) \ ++ (((value) & ((1 << MCI_##name##_SIZE) - 1)) \ ++ << MCI_##name##_OFFSET) ++#define MCI_BFEXT(name,value) \ ++ (((value) >> MCI_##name##_OFFSET) \ ++ & ((1 << MCI_##name##_SIZE) - 1)) ++#define MCI_BFINS(name,value,old) \ ++ (((old) & ~(((1 << MCI_##name##_SIZE) - 1) \ ++ << MCI_##name##_OFFSET)) \ ++ | MCI_BF(name,value)) ++ ++/* Register access macros */ ++#define mci_readl(port,reg) \ ++ __raw_readl((port)->regs + MCI_##reg) ++#define mci_writel(port,reg,value) \ ++ __raw_writel((value), (port)->regs + MCI_##reg) ++ ++#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */ +diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c +index f334959..e2ef662 100644 +--- a/drivers/mtd/chips/cfi_cmdset_0001.c ++++ b/drivers/mtd/chips/cfi_cmdset_0001.c +@@ -47,6 +47,7 @@ + #define I82802AC 0x00ac + #define MANUFACTURER_ST 0x0020 + #define M50LPW080 0x002F ++#define AT49BV640D 0x02de + + static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); + static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +@@ -153,6 +154,47 @@ static void cfi_tell_features(struct cfi_pri_intelext *extp) + } + #endif + ++/* Atmel chips don't use the same PRI format as Intel chips */ ++static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param) ++{ ++ struct map_info *map = mtd->priv; ++ struct cfi_private *cfi = map->fldrv_priv; ++ struct cfi_pri_intelext *extp = cfi->cmdset_priv; ++ struct cfi_pri_atmel atmel_pri; ++ uint32_t features = 0; ++ ++ /* Reverse byteswapping */ ++ extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport); ++ extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask); ++ extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr); ++ ++ memcpy(&atmel_pri, extp, sizeof(atmel_pri)); ++ memset((char *)extp + 5, 0, sizeof(*extp) - 5); ++ ++ printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features); ++ ++ if (atmel_pri.Features & 0x01) /* chip erase supported */ ++ features |= (1<<0); ++ if (atmel_pri.Features & 0x02) /* erase suspend supported */ ++ features |= (1<<1); ++ if (atmel_pri.Features & 0x04) /* program suspend supported */ ++ features |= (1<<2); ++ if (atmel_pri.Features & 0x08) /* simultaneous operations supported */ ++ features |= (1<<9); ++ if (atmel_pri.Features & 0x20) /* page mode read supported */ ++ features |= (1<<7); ++ if (atmel_pri.Features & 0x40) /* queued erase supported */ ++ features |= (1<<4); ++ if (atmel_pri.Features & 0x80) /* Protection bits supported */ ++ features |= (1<<6); ++ ++ extp->FeatureSupport = features; ++ ++ /* burst write mode not supported */ ++ cfi->cfiq->BufWriteTimeoutTyp = 0; ++ cfi->cfiq->BufWriteTimeoutMax = 0; ++} ++ + #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE + /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */ + static void fixup_intel_strataflash(struct mtd_info *mtd, void* param) +@@ -221,6 +263,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd, void *param) + } + + static struct cfi_fixup cfi_fixup_table[] = { ++ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, + #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE + { CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL }, + #endif +diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c +index 1f64458..205977b 100644 +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -185,6 +185,10 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param) + extp->TopBottom = 2; + else + extp->TopBottom = 3; ++ ++ /* burst write mode not supported */ ++ cfi->cfiq->BufWriteTimeoutTyp = 0; ++ cfi->cfiq->BufWriteTimeoutMax = 0; + } + + static void fixup_use_secsi(struct mtd_info *mtd, void *param) +@@ -217,6 +221,7 @@ static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param) + } + + static struct cfi_fixup cfi_fixup_table[] = { ++ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, + #ifdef AMD_BOOTLOC_BUG + { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL }, + #endif +@@ -229,7 +234,6 @@ static struct cfi_fixup cfi_fixup_table[] = { + #if !FORCE_WORD_WRITE + { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, }, + #endif +- { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, + { 0, 0, NULL, NULL } + }; + static struct cfi_fixup jedec_fixup_table[] = { +diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig +index 35f8864..29388e1 100644 +--- a/drivers/pcmcia/Kconfig ++++ b/drivers/pcmcia/Kconfig +@@ -270,6 +270,13 @@ config AT91_CF + Say Y here to support the CompactFlash controller on AT91 chips. + Or choose M to compile the driver as a module named "at91_cf". + ++config AT32_CF ++ tristate "AT32AP CompactFlash Controller" ++ depends on PCMCIA && AVR32 && PLATFORM_AT32AP ++ help ++ Say Y here to support the CompactFlash controller on AT32 chips. ++ Or choose M to compile the driver as a module named "at32_cf". ++ + config PCCARD_NONSTATIC + tristate + +diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile +index 4276965..08d7ffa 100644 +--- a/drivers/pcmcia/Makefile ++++ b/drivers/pcmcia/Makefile +@@ -37,6 +37,7 @@ obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o + obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o + obj-$(CONFIG_OMAP_CF) += omap_cf.o + obj-$(CONFIG_AT91_CF) += at91_cf.o ++obj-$(CONFIG_AT32_CF) += at32_cf.o + + sa11xx_core-y += soc_common.o sa11xx_base.o + pxa2xx_core-y += soc_common.o pxa2xx_base.o +diff --git a/drivers/pcmcia/at32_cf.c b/drivers/pcmcia/at32_cf.c +new file mode 100644 +index 0000000..7165c39 +--- /dev/null ++++ b/drivers/pcmcia/at32_cf.c +@@ -0,0 +1,506 @@ ++/* ++ * Driver for AVR32 Static Memory Controller: CompactFlash support ++ * ++ * Copyright (C) 2006 Atmel Norway ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA ++ * 02111-1307, USA. ++ * ++ * The full GNU General Public License is included in this ++ * distribution in the file called COPYING. ++ */ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/platform_device.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/delay.h> ++#include <linux/interrupt.h> ++#include <linux/err.h> ++#include <linux/clk.h> ++#include <linux/dma-mapping.h> ++ ++#include <pcmcia/ss.h> ++ ++#include <asm/gpio.h> ++#include <asm/io.h> ++#include <asm/arch/board.h> ++ ++#include <asm/arch/smc.h> ++ ++struct at32_cf_socket { ++ struct pcmcia_socket socket; ++ int detect_pin; ++ int reset_pin; ++ int vcc_pin; ++ struct resource res_attr; ++ struct resource res_mem; ++ struct resource res_io; ++ struct smc_config smc; ++ unsigned int irq; ++ unsigned int cf_cs; ++ socket_state_t state; ++ unsigned present:1; ++}; ++#define to_at32_cf(sock) container_of(sock, struct at32_cf_socket, socket) ++ ++/* ++ * We have the following memory layout relative to the base address: ++ * ++ * Alt IDE Mode: 00e0 0000 -> 00ff ffff ++ * True IDE Mode: 00c0 0000 -> 00df ffff ++ * I/O memory: 0080 0000 -> 00bf ffff ++ * Common memory: 0040 0000 -> 007f ffff ++ * Attribute memory: 0000 0000 -> 003f ffff ++ */ ++#define CF_ATTR_OFFSET 0x00000000 ++#define CF_MEM_OFFSET 0x00400000 ++#define CF_IO_OFFSET 0x00800000 ++#define CF_RES_SIZE 2048 ++ ++#ifdef DEBUG ++ ++static int pc_debug; ++module_param(pc_debug, int, 0644); ++ ++static void at32_cf_debug(struct at32_cf_socket *cf, const char *func, ++ int level, const char *fmt, ...) ++{ ++ va_list args; ++ ++ if (pc_debug > level) { ++ printk(KERN_DEBUG "at32_cf/%u: %s: ", cf->cf_cs, func); ++ va_start(args, fmt); ++ vprintk(fmt, args); ++ va_end(args); ++ } ++} ++ ++#define debug(cf, lvl, fmt, arg...) \ ++ at32_cf_debug(cf, __func__, lvl, fmt, ##arg) ++ ++#else ++#define debug(cf, lvl, fmt, arg...) do { } while (0) ++#endif ++ ++static inline int at32_cf_present(struct at32_cf_socket *cf) ++{ ++ int present = 1; ++ ++ /* If we don't have a detect pin, assume the card is present */ ++ if (cf->detect_pin >= 0) ++ present = !gpio_get_value(cf->detect_pin); ++ ++ return present; ++} ++ ++static irqreturn_t at32_cf_irq(int irq, void *dev_id) ++{ ++ struct at32_cf_socket *cf = dev_id; ++ unsigned int present; ++ ++ present = at32_cf_present(cf); ++ if (present != cf->present) { ++ cf->present = present; ++ debug(cf, 3, "card %s\n", present ? "present" : "gone"); ++ pcmcia_parse_events(&cf->socket, SS_DETECT); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++static int at32_cf_get_status(struct pcmcia_socket *sock, u_int *value) ++{ ++ struct at32_cf_socket *cf; ++ u_int status = 0; ++ ++ cf = container_of(sock, struct at32_cf_socket, socket); ++ ++ if (at32_cf_present(cf)) { ++ /* NOTE: gpio on AP7xxx is 3.3V */ ++ status = SS_DETECT | SS_3VCARD | SS_READY; ++ if (cf->vcc_pin < 0 || gpio_get_value(cf->vcc_pin)) ++ status |= SS_POWERON; ++ } ++ ++ *value = status; ++ return 0; ++} ++ ++static int at32_cf_set_socket(struct pcmcia_socket *sock, socket_state_t *state) ++{ ++ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket); ++ ++ debug(cf, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n", ++ (state->csc_mask==0)?"<NONE> ":"", ++ (state->csc_mask&SS_DETECT)?"DETECT ":"", ++ (state->csc_mask&SS_READY)?"READY ":"", ++ (state->csc_mask&SS_BATDEAD)?"BATDEAD ":"", ++ (state->csc_mask&SS_BATWARN)?"BATWARN ":"", ++ (state->csc_mask&SS_STSCHG)?"STSCHG ":"", ++ (state->flags==0)?"<NONE> ":"", ++ (state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"", ++ (state->flags&SS_IOCARD)?"IOCARD ":"", ++ (state->flags&SS_RESET)?"RESET ":"", ++ (state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"", ++ (state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"", ++ state->Vcc, state->Vpp, state->io_irq); ++ ++ /* ++ * TODO: Allow boards to override this in case they have level ++ * converters. ++ */ ++ switch (state->Vcc) { ++ case 0: ++ if (cf->vcc_pin >= 0) ++ gpio_set_value(cf->vcc_pin, 0); ++ break; ++ case 33: ++ if (cf->vcc_pin >= 0) ++ gpio_set_value(cf->vcc_pin, 1); ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ if (cf->reset_pin >= 0) ++ gpio_set_value(cf->reset_pin, state->flags & SS_RESET); ++ ++ cf->state = *state; ++ ++ return 0; ++} ++ ++static int at32_cf_socket_init(struct pcmcia_socket *sock) ++{ ++#ifdef DEBUG ++ struct at32_cf_socket *cf = to_at32_cf(sock); ++ debug(cf, 2, "called\n"); ++#endif ++ return 0; ++} ++ ++static int at32_cf_suspend(struct pcmcia_socket *sock) ++{ ++#ifdef DEBUG ++ struct at32_cf_socket *cf = to_at32_cf(sock); ++ debug(cf, 2, "called\n"); ++#endif ++ at32_cf_set_socket(sock, &dead_socket); ++ ++ return 0; ++} ++ ++static int at32_cf_set_io_map(struct pcmcia_socket *sock, ++ struct pccard_io_map *map) ++{ ++ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket); ++ int retval; ++ ++ debug(cf, 2, "map %u speed %u start 0x%08x stop 0x%08x\n", ++ map->map, map->speed, map->start, map->stop); ++ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n", ++ (map->flags == 0) ? "<NONE>":"", ++ (map->flags & MAP_ACTIVE) ? "ACTIVE " : "", ++ (map->flags & MAP_16BIT) ? "16BIT " : "", ++ (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "", ++ (map->flags & MAP_0WS) ? "0WS " : "", ++ (map->flags & MAP_WRPROT) ? "WRPROT " : "", ++ (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "", ++ (map->flags & MAP_PREFETCH) ? "PREFETCH " : ""); ++ ++ map->flags &= MAP_ACTIVE | MAP_16BIT | MAP_USE_WAIT; ++ ++ if (map->flags & MAP_16BIT) ++ cf->smc.bus_width = 2; ++ else ++ cf->smc.bus_width = 1; ++ ++ if (map->flags & MAP_USE_WAIT) ++ cf->smc.nwait_mode = 3; ++ else ++ cf->smc.nwait_mode = 0; ++ ++ retval = smc_set_configuration(cf->cf_cs, &cf->smc); ++ if (retval) { ++ printk(KERN_ERR "at32_cf: could not set up SMC for I/O\n"); ++ return retval; ++ } ++ ++ map->start = cf->socket.io_offset; ++ map->stop = map->start + CF_RES_SIZE - 1; ++ ++ return 0; ++} ++ ++static int ++at32_cf_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map) ++{ ++ struct at32_cf_socket *cf; ++ ++ cf = container_of(sock, struct at32_cf_socket, socket); ++ ++ debug(cf, 2, "map %u speed %u card_start %08x\n", ++ map->map, map->speed, map->card_start); ++ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n", ++ (map->flags==0)?"<NONE>":"", ++ (map->flags&MAP_ACTIVE)?"ACTIVE ":"", ++ (map->flags&MAP_16BIT)?"16BIT ":"", ++ (map->flags&MAP_AUTOSZ)?"AUTOSZ ":"", ++ (map->flags&MAP_0WS)?"0WS ":"", ++ (map->flags&MAP_WRPROT)?"WRPROT ":"", ++ (map->flags&MAP_ATTRIB)?"ATTRIB ":"", ++ (map->flags&MAP_USE_WAIT)?"USE_WAIT ":""); ++ ++ if (map->card_start) ++ return -EINVAL; ++ ++ map->flags &= MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT; ++ ++ if (map->flags & MAP_ATTRIB) ++ map->static_start = cf->res_attr.start; ++ else ++ map->static_start = cf->res_mem.start; ++ ++ return 0; ++} ++ ++static struct pccard_operations at32_cf_ops = { ++ .init = at32_cf_socket_init, ++ .suspend = at32_cf_suspend, ++ .get_status = at32_cf_get_status, ++ .set_socket = at32_cf_set_socket, ++ .set_io_map = at32_cf_set_io_map, ++ .set_mem_map = at32_cf_set_mem_map, ++}; ++ ++static int __init request_pin(struct platform_device *pdev, ++ unsigned int pin, const char *name) ++{ ++ if (gpio_request(pin, name)) { ++ dev_warn(&pdev->dev, "failed to request %s pin\n", name); ++ return -1; ++ } ++ ++ return pin; ++} ++ ++static int __init at32_cf_probe(struct platform_device *pdev) ++{ ++ struct at32_cf_socket *cf; ++ struct cf_platform_data *board = pdev->dev.platform_data; ++ struct resource *res_skt; ++ int irq; ++ int ret; ++ ++ dev_dbg(&pdev->dev, "probe"); ++ ++ if (!board) ++ return -ENXIO; ++ ++ res_skt = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res_skt) ++ return -ENXIO; ++ ++ irq = platform_get_irq(pdev, 0); ++ if (irq < 0) ++ return irq; ++ ++ cf = kzalloc(sizeof(struct at32_cf_socket), GFP_KERNEL); ++ if (!cf) ++ return -ENOMEM; ++ ++ cf->detect_pin = -1; ++ cf->reset_pin = -1; ++ cf->vcc_pin = -1; ++ cf->cf_cs = board->cs; ++ ++ if (board->detect_pin) ++ cf->detect_pin = request_pin(pdev, board->detect_pin, ++ "cf_detect"); ++ if (board->reset_pin) ++ cf->reset_pin = request_pin(pdev, board->reset_pin, ++ "cf_reset"); ++ if (board->vcc_pin) ++ cf->vcc_pin = request_pin(pdev, board->reset_pin, ++ "cf_vcc"); ++ ++ debug(cf, 2, "pins: detect=%d reset=%d vcc=%d\n", ++ cf->detect_pin, cf->reset_pin, cf->vcc_pin); ++ ++ cf->socket.pci_irq = irq; ++ cf->socket.ops = &at32_cf_ops; ++ cf->socket.resource_ops = &pccard_static_ops; ++ cf->socket.dev.parent = &pdev->dev; ++ cf->socket.owner = THIS_MODULE; ++ cf->socket.features = ++ SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP | SS_CAP_PCCARD; ++ cf->socket.map_size = CF_RES_SIZE; ++ ++ cf->res_attr.start = res_skt->start + CF_ATTR_OFFSET; ++ cf->res_attr.end = cf->res_attr.start + CF_RES_SIZE - 1; ++ cf->res_attr.name = "attribute"; ++ cf->res_attr.flags = IORESOURCE_MEM; ++ ret = request_resource(res_skt, &cf->res_attr); ++ if (ret) ++ goto err_request_res_attr; ++ ++ cf->res_mem.start = res_skt->start + CF_MEM_OFFSET; ++ cf->res_mem.end = cf->res_mem.start + CF_RES_SIZE - 1; ++ cf->res_mem.name = "memory"; ++ cf->res_mem.flags = IORESOURCE_MEM; ++ ret = request_resource(res_skt, &cf->res_mem); ++ if (ret) ++ goto err_request_res_mem; ++ ++ cf->res_io.start = res_skt->start + CF_IO_OFFSET; ++ cf->res_io.end = cf->res_io.start + CF_RES_SIZE - 1; ++ cf->res_io.name = "io"; ++ cf->res_io.flags = IORESOURCE_MEM; ++ ret = request_resource(res_skt, &cf->res_io); ++ if (ret) ++ goto err_request_res_io; ++ ++ cf->socket.io_offset = cf->res_io.start; ++ ++ if (cf->detect_pin >= 0) { ++ ret = request_irq(gpio_to_irq(cf->detect_pin), at32_cf_irq, ++ IRQF_SHARED, "cf_detect", cf); ++ if (ret) { ++ debug(cf, 1, ++ "failed to request cf_detect interrupt\n"); ++ goto err_detect_irq; ++ } ++ } ++ ++ /* Setup SMC timings */ ++ cf->smc.ncs_read_setup = 30; ++ cf->smc.nrd_setup = 75; ++ cf->smc.ncs_write_setup = 30; ++ cf->smc.nwe_setup = 75; ++ ++ cf->smc.ncs_read_pulse = 240; ++ cf->smc.nrd_pulse = 165; ++ cf->smc.ncs_write_pulse = 240; ++ cf->smc.nwe_pulse = 165; ++ ++ cf->smc.read_cycle = 300; ++ cf->smc.write_cycle = 300; ++ ++ cf->smc.bus_width = 2; ++ cf->smc.nrd_controlled = 1; ++ cf->smc.nwe_controlled = 1; ++ cf->smc.nwait_mode = 0; ++ cf->smc.byte_write = 0; ++ cf->smc.tdf_cycles = 1; ++ cf->smc.tdf_mode = 0; ++ ++ ret = smc_set_configuration(cf->cf_cs, &cf->smc); ++ if (ret) { ++ debug(cf, 1, "failed to configure SMC\n", ret); ++ goto err_smc; ++ } ++ ++ ret = pcmcia_register_socket(&cf->socket); ++ if (ret) { ++ debug(cf, 1, "failed to register socket: %d\n", ret); ++ goto err_register_socket; ++ } ++ ++ if (cf->reset_pin >= 0) { ++ gpio_direction_output(cf->reset_pin, 0); ++ } ++ ++ platform_set_drvdata(pdev, cf); ++ ++ dev_info(&pdev->dev, "Atmel SMC CF interface at 0x%08lx\n", ++ (unsigned long)res_skt->start); ++ ++ return 0; ++ ++err_register_socket: ++err_smc: ++ if (cf->detect_pin >= 0) ++ free_irq(gpio_to_irq(cf->detect_pin), cf); ++err_detect_irq: ++ release_resource(&cf->res_io); ++err_request_res_io: ++ release_resource(&cf->res_mem); ++err_request_res_mem: ++ release_resource(&cf->res_attr); ++err_request_res_attr: ++ if (cf->vcc_pin >= 0) ++ gpio_free(cf->vcc_pin); ++ if (cf->reset_pin >= 0) ++ gpio_free(cf->reset_pin); ++ if (cf->detect_pin >= 0) ++ gpio_free(cf->detect_pin); ++ kfree(cf); ++ ++ return ret; ++} ++ ++static int __exit at32_cf_remove(struct platform_device *pdev) ++{ ++ struct at32_cf_socket *cf = platform_get_drvdata(pdev); ++ ++ pcmcia_unregister_socket(&cf->socket); ++ if (cf->detect_pin >= 0) { ++ free_irq(gpio_to_irq(cf->detect_pin), cf); ++ gpio_free(cf->detect_pin); ++ } ++ if (cf->vcc_pin >= 0) ++ gpio_free(cf->vcc_pin); ++ if (cf->reset_pin >= 0) ++ gpio_free(cf->reset_pin); ++ ++ release_resource(&cf->res_io); ++ release_resource(&cf->res_mem); ++ release_resource(&cf->res_attr); ++ kfree(cf); ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++static struct platform_driver at32_cf_driver = { ++ .remove = __exit_p(at32_cf_remove), ++ .driver = { ++ .name = "at32_cf", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init at32_cf_init(void) ++{ ++ int ret; ++ ++ ret = platform_driver_probe(&at32_cf_driver, at32_cf_probe); ++ if (ret) ++ printk(KERN_ERR "at32_cf: probe failed: %d\n", ret); ++ return ret; ++} ++ ++static void __exit at32_cf_exit(void) ++{ ++ platform_driver_unregister(&at32_cf_driver); ++} ++ ++module_init(at32_cf_init); ++module_exit(at32_cf_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("Driver for SMC PCMCIA interface"); ++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); +diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c +index d154dee..5a464ec 100644 +--- a/drivers/pcmcia/cistpl.c ++++ b/drivers/pcmcia/cistpl.c +@@ -1091,7 +1091,7 @@ static int parse_cftable_entry(tuple_t *tuple, + break; + case 0x20: + entry->mem.nwin = 1; +- entry->mem.win[0].len = le16_to_cpu(*(__le16 *)p) << 8; ++ entry->mem.win[0].len = (p[0] << 8) | (p[1] << 16); + entry->mem.win[0].card_addr = 0; + entry->mem.win[0].host_addr = 0; + p += 2; +@@ -1099,9 +1099,8 @@ static int parse_cftable_entry(tuple_t *tuple, + break; + case 0x40: + entry->mem.nwin = 1; +- entry->mem.win[0].len = le16_to_cpu(*(__le16 *)p) << 8; +- entry->mem.win[0].card_addr = +- le16_to_cpu(*(__le16 *)(p+2)) << 8; ++ entry->mem.win[0].len = (p[0] << 8) | (p[1] << 16); ++ entry->mem.win[0].card_addr = (p[2] << 8) | (p[3] << 16); + entry->mem.win[0].host_addr = 0; + p += 4; + if (p > q) return CS_BAD_TUPLE; +diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig +index 95826b9..ee96d77 100644 +--- a/drivers/rtc/Kconfig ++++ b/drivers/rtc/Kconfig +@@ -313,6 +313,13 @@ config RTC_DRV_PL031 + To compile this driver as a module, choose M here: the + module will be called rtc-pl031. + ++config RTC_DRV_AT32AP700X ++ tristate "AT32AP700X series RTC" ++ depends on RTC_CLASS && PLATFORM_AT32AP ++ help ++ Driver for the internal RTC (Realtime Clock) on Atmel AVR32 ++ AT32AP700x family processors. ++ + config RTC_DRV_AT91RM9200 + tristate "AT91RM9200" + depends on RTC_CLASS && ARCH_AT91RM9200 +diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile +index 92bfe1b..d36d987 100644 +--- a/drivers/rtc/Makefile ++++ b/drivers/rtc/Makefile +@@ -19,6 +19,7 @@ obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o + obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o + obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o + obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o ++obj-$(CONFIG_RTC_DRV_AT32AP700X) += rtc-at32ap700x.o + obj-$(CONFIG_RTC_DRV_DS1307) += rtc-ds1307.o + obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o + obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o +diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c +new file mode 100644 +index 0000000..a59b7c1 +--- /dev/null ++++ b/drivers/rtc/rtc-at32ap700x.c +@@ -0,0 +1,319 @@ ++/* ++ * An RTC driver for the AVR32 AT32AP700x processor series ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/platform_device.h> ++#include <linux/rtc.h> ++ ++#include <asm/io.h> ++ ++/* This is a bare-bones RTC. It runs during most system sleep states, but has ++ * no battery backup and gets reset during system restart. It must be ++ * initialized from an external clock (network, I2C, etc) before it can be of ++ * much use. ++ * ++ * The alarm functionality is limited by the hardware, not supporting periodic ++ * interrupts. ++ */ ++ ++#define RTC_CTRL 0x00 ++#define RTC_CTRL_EN 0 ++#define RTC_CTRL_PCLR 1 ++#define RTC_CTRL_TOPEN 2 ++#define RTC_CTRL_PSEL 8 ++ ++#define RTC_VAL 0x04 ++ ++#define RTC_TOP 0x08 ++ ++#define RTC_IER 0x10 ++#define RTC_IER_TOPI 0 ++ ++#define RTC_IDR 0x14 ++#define RTC_IDR_TOPI 0 ++ ++#define RTC_IMR 0x18 ++#define RTC_IMR_TOPI 0 ++ ++#define RTC_ISR 0x1c ++#define RTC_ISR_TOPI 0 ++ ++#define RTC_ICR 0x20 ++#define RTC_ICR_TOPI 0 ++ ++#define RTC_BIT(name) (1 << RTC_##name) ++#define RTC_BF(name,value) ((value) << RTC_##name) ++ ++#define rtc_readl(dev,reg) \ ++ __raw_readl((dev)->regs + RTC_##reg) ++#define rtc_writel(dev,reg,value) \ ++ __raw_writel((value), (dev)->regs + RTC_##reg) ++ ++struct rtc_at32ap700x { ++ struct rtc_device *rtc; ++ void __iomem *regs; ++ unsigned long alarm_time; ++ unsigned long irq; ++ spinlock_t lock; ++}; ++ ++static int at32_rtc_readtime(struct device *dev, struct rtc_time *tm) ++{ ++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev); ++ unsigned long now; ++ ++ now = rtc_readl(rtc, VAL); ++ rtc_time_to_tm(now, tm); ++ ++ return 0; ++} ++ ++static int at32_rtc_settime(struct device *dev, struct rtc_time *tm) ++{ ++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev); ++ unsigned long now; ++ int ret; ++ ++ ret = rtc_tm_to_time(tm, &now); ++ if (ret == 0) ++ rtc_writel(rtc, VAL, now); ++ ++ return ret; ++} ++ ++static int at32_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) ++{ ++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev); ++ struct rtc_time tm; ++ ++ rtc_time_to_tm(rtc->alarm_time, &tm); ++ alrm->time = tm; ++ alrm->pending = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0; ++ ++ return 0; ++} ++ ++static int at32_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) ++{ ++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev); ++ struct rtc_time tm; ++ unsigned long rtc_unix_time; ++ unsigned long alarm_unix_time; ++ int ret; ++ ++ rtc_unix_time = rtc_readl(rtc, VAL); ++ rtc_time_to_tm(rtc_unix_time, &tm); ++ ++ /* RTC does only support one alarm time, not periodic */ ++ if (alrm->time.tm_mday < 1) { ++ alrm->time.tm_mday = tm.tm_mday; ++ alrm->time.tm_mon = tm.tm_mon; ++ alrm->time.tm_year = tm.tm_year; ++ alrm->time.tm_wday = tm.tm_wday; ++ alrm->time.tm_yday = tm.tm_yday; ++ } ++ ++ ret = rtc_tm_to_time(&alrm->time, &alarm_unix_time); ++ if (ret) ++ return ret; ++ ++ if (alarm_unix_time < rtc_unix_time) ++ return -EINVAL; ++ ++ spin_lock_irq(&rtc->lock); ++ rtc->alarm_time = alarm_unix_time; ++ rtc_writel(rtc, TOP, rtc->alarm_time); ++ if (alrm->pending) ++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) ++ | RTC_BIT(CTRL_TOPEN)); ++ else ++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) ++ & ~RTC_BIT(CTRL_TOPEN)); ++ spin_unlock_irq(&rtc->lock); ++ ++ return ret; ++} ++ ++static int at32_rtc_ioctl(struct device *dev, unsigned int cmd, ++ unsigned long arg) ++{ ++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev); ++ int ret = 0; ++ ++ switch (cmd) { ++ case RTC_AIE_ON: ++ spin_lock_irq(&rtc->lock); ++ if (rtc_readl(rtc, VAL) > rtc->alarm_time) ++ return -EINVAL; ++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) ++ | RTC_BIT(CTRL_TOPEN)); ++ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI)); ++ rtc_writel(rtc, IER, RTC_BIT(IER_TOPI)); ++ spin_unlock_irq(&rtc->lock); ++ break; ++ case RTC_AIE_OFF: ++ spin_lock_irq(&rtc->lock); ++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) ++ & ~RTC_BIT(CTRL_TOPEN)); ++ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI)); ++ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI)); ++ spin_unlock_irq(&rtc->lock); ++ break; ++ default: ++ ret = -ENOIOCTLCMD; ++ break; ++ } ++ ++ return ret; ++} ++ ++static irqreturn_t at32_rtc_interrupt(int irq, void *dev_id) ++{ ++ struct rtc_at32ap700x *rtc = (struct rtc_at32ap700x *)dev_id; ++ unsigned long isr = rtc_readl(rtc, ISR); ++ unsigned long events = 0; ++ ++ spin_lock(&rtc->lock); ++ ++ if (isr & RTC_BIT(ISR_TOPI)) { ++ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI)); ++ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI)); ++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) ++ & ~RTC_BIT(CTRL_TOPEN)); ++ rtc_writel(rtc, VAL, rtc->alarm_time); ++ events = RTC_AF | RTC_IRQF; ++ rtc_update_irq(&rtc->rtc->class_dev, 1, events); ++ } ++ ++ spin_unlock(&rtc->lock); ++ ++ return IRQ_HANDLED; ++} ++ ++static struct rtc_class_ops at32_rtc_ops = { ++ .ioctl = at32_rtc_ioctl, ++ .read_time = at32_rtc_readtime, ++ .set_time = at32_rtc_settime, ++ .read_alarm = at32_rtc_readalarm, ++ .set_alarm = at32_rtc_setalarm, ++}; ++ ++static int __devinit at32_rtc_probe(struct platform_device *pdev) ++{ ++ struct resource *regs; ++ struct rtc_at32ap700x *rtc; ++ int irq = -1; ++ int ret; ++ ++ rtc = kmalloc(sizeof(struct rtc_at32ap700x), GFP_KERNEL); ++ if (!rtc) { ++ ret = -ENOMEM; ++ goto out; ++ } ++ ++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!regs) { ++ printk(KERN_ERR "rtc: no mmio resource defined for RTC\n"); ++ ret = -ENXIO; ++ goto out; ++ } ++ ++ irq = platform_get_irq(pdev, 0); ++ if (irq < 0) { ++ printk(KERN_ERR "rtc: could not get irq\n"); ++ ret = -ENXIO; ++ goto out; ++ } ++ ++ ret = request_irq(irq, at32_rtc_interrupt, IRQF_SHARED, "rtc", rtc); ++ if (ret) { ++ printk(KERN_ERR "rtc: could not request irq%d\n", irq); ++ goto out; ++ } ++ ++ rtc->irq = irq; ++ rtc->alarm_time = 0; ++ rtc->regs = ioremap(regs->start, regs->end - regs->start + 1); ++ spin_lock_init(&rtc->lock); ++ ++ /* Maybe init RTC: count from zero at 1 Hz, disable wrap irq */ ++ /* Do not reset VAL register, as it can hold an old time ++ * from last JTAG reset. */ ++ if (!(rtc_readl(rtc, CTRL) & RTC_BIT(CTRL_EN))) { ++ rtc_writel(rtc, CTRL, RTC_BIT(CTRL_PCLR)); ++ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI)); ++ rtc_writel(rtc, CTRL, RTC_BF(CTRL_PSEL, 0xe) ++ | RTC_BIT(CTRL_EN)); ++ } ++ ++ /* REVISIT init in arch code if wdt or rtc is enabled; this ++ * affects both... ++ */ ++ ++ rtc->rtc = rtc_device_register(pdev->name, &pdev->dev, ++ &at32_rtc_ops, THIS_MODULE); ++ if (IS_ERR(rtc->rtc)) { ++ ret = PTR_ERR(rtc->rtc); ++ goto out_free_irq; ++ } ++ ++ platform_set_drvdata(pdev, rtc); ++ ++ printk(KERN_INFO "Atmel RTC for AT32AP700x at %08lx irq %ld\n", ++ (unsigned long)rtc->regs, rtc->irq); ++ ++ return 0; ++ ++out_free_irq: ++ free_irq(irq, rtc); ++ iounmap(rtc->regs); ++out: ++ kfree(rtc); ++ return ret; ++} ++ ++static int __devexit at32_rtc_remove(struct platform_device *pdev) ++{ ++ struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev); ++ ++ if (rtc->irq >= 0) ++ free_irq(rtc->irq, rtc); ++ if (rtc->regs) ++ iounmap(rtc->regs); ++ rtc_device_unregister(rtc->rtc); ++ kfree(rtc); ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++static struct platform_driver at32_rtc_driver = { ++ .remove = __exit_p(at32_rtc_remove), ++ .driver = { ++ .name = "rtc", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init at32_rtc_init(void) ++{ ++ return platform_driver_probe(&at32_rtc_driver, at32_rtc_probe); ++} ++ ++static void __exit at32_rtc_exit(void) ++{ ++ platform_driver_unregister(&at32_rtc_driver); ++} ++ ++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); ++MODULE_DESCRIPTION("Real time counter for AVR32 AT32AP700x"); ++MODULE_LICENSE("GPL"); ++ ++module_init(at32_rtc_init); ++module_exit(at32_rtc_exit); +diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c +index 935f48f..4d6b3c5 100644 +--- a/drivers/serial/atmel_serial.c ++++ b/drivers/serial/atmel_serial.c +@@ -114,6 +114,7 @@ struct atmel_uart_port { + struct uart_port uart; /* uart */ + struct clk *clk; /* uart clock */ + unsigned short suspended; /* is port suspended? */ ++ int break_active; /* break being received */ + }; + + static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART]; +@@ -252,6 +253,7 @@ static void atmel_break_ctl(struct uart_port *port, int break_state) + */ + static void atmel_rx_chars(struct uart_port *port) + { ++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port; + struct tty_struct *tty = port->info->tty; + unsigned int status, ch, flg; + +@@ -267,13 +269,29 @@ static void atmel_rx_chars(struct uart_port *port) + * note that the error handling code is + * out of the main execution path + */ +- if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME | ATMEL_US_OVRE | ATMEL_US_RXBRK))) { ++ if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME ++ | ATMEL_US_OVRE | ATMEL_US_RXBRK) ++ || atmel_port->break_active)) { + UART_PUT_CR(port, ATMEL_US_RSTSTA); /* clear error */ +- if (status & ATMEL_US_RXBRK) { ++ if (status & ATMEL_US_RXBRK ++ && !atmel_port->break_active) { + status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */ + port->icount.brk++; ++ atmel_port->break_active = 1; ++ UART_PUT_IER(port, ATMEL_US_RXBRK); + if (uart_handle_break(port)) + goto ignore_char; ++ } else { ++ /* ++ * This is either the end-of-break ++ * condition or we've received at ++ * least one character without RXBRK ++ * being set. In both cases, the next ++ * RXBRK will indicate start-of-break. ++ */ ++ UART_PUT_IDR(port, ATMEL_US_RXBRK); ++ status &= ~ATMEL_US_RXBRK; ++ atmel_port->break_active = 0; + } + if (status & ATMEL_US_PARE) + port->icount.parity++; +@@ -352,6 +370,16 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id) + /* Interrupt receive */ + if (pending & ATMEL_US_RXRDY) + atmel_rx_chars(port); ++ else if (pending & ATMEL_US_RXBRK) { ++ /* ++ * End of break detected. If it came along ++ * with a character, atmel_rx_chars will ++ * handle it. ++ */ ++ UART_PUT_CR(port, ATMEL_US_RSTSTA); ++ UART_PUT_IDR(port, ATMEL_US_RXBRK); ++ atmel_port->break_active = 0; ++ } + + // TODO: All reads to CSR will clear these interrupts! + if (pending & ATMEL_US_RIIC) port->icount.rng++; +@@ -484,11 +512,16 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, + unsigned long flags; + unsigned int mode, imr, quot, baud; + ++ /* Get current mode register */ ++ mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR); ++ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + +- /* Get current mode register */ +- mode = UART_GET_MR(port) & ~(ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR); ++ if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */ ++ quot /= 8; ++ mode |= ATMEL_US_USCLKS_MCK_DIV8; ++ } + + /* byte size */ + switch (termios->c_cflag & CSIZE) { +diff --git a/drivers/serial/atmel_serial.h b/drivers/serial/atmel_serial.h +index 11b4436..e014177 100644 +--- a/drivers/serial/atmel_serial.h ++++ b/drivers/serial/atmel_serial.h +@@ -46,6 +46,9 @@ + #define ATMEL_US_USMODE_ISO7816_T1 6 + #define ATMEL_US_USMODE_IRDA 8 + #define ATMEL_US_USCLKS (3 << 4) /* Clock Selection */ ++#define ATMEL_US_USCLKS_MCK (0 << 4) ++#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4) ++#define ATMEL_US_USCLKS_SCK (3 << 4) + #define ATMEL_US_CHRL (3 << 6) /* Character Length */ + #define ATMEL_US_CHRL_5 (0 << 6) + #define ATMEL_US_CHRL_6 (1 << 6) +diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c +index 66e7bc9..8f5453f 100644 +--- a/drivers/spi/atmel_spi.c ++++ b/drivers/spi/atmel_spi.c +@@ -22,10 +22,7 @@ + #include <asm/io.h> + #include <asm/arch/board.h> + #include <asm/arch/gpio.h> +- +-#ifdef CONFIG_ARCH_AT91 + #include <asm/arch/cpu.h> +-#endif + + #include "atmel_spi.h" + +@@ -116,16 +113,16 @@ static void atmel_spi_next_xfer(struct spi_master *master, + + len = as->remaining_bytes; + +- tx_dma = xfer->tx_dma; +- rx_dma = xfer->rx_dma; ++ tx_dma = xfer->tx_dma + xfer->len - len; ++ rx_dma = xfer->rx_dma + xfer->len - len; + + /* use scratch buffer only when rx or tx data is unspecified */ +- if (rx_dma == INVALID_DMA_ADDRESS) { ++ if (!xfer->rx_buf) { + rx_dma = as->buffer_dma; + if (len > BUFFER_SIZE) + len = BUFFER_SIZE; + } +- if (tx_dma == INVALID_DMA_ADDRESS) { ++ if (!xfer->tx_buf) { + tx_dma = as->buffer_dma; + if (len > BUFFER_SIZE) + len = BUFFER_SIZE; +@@ -415,8 +412,8 @@ static int atmel_spi_setup(struct spi_device *spi) + csr |= SPI_BIT(NCPHA); + + /* TODO: DLYBS and DLYBCT */ +- csr |= SPI_BF(DLYBS, 10); +- csr |= SPI_BF(DLYBCT, 10); ++ csr |= SPI_BF(DLYBS, 0); ++ csr |= SPI_BF(DLYBCT, 0); + + /* chipselect must have been muxed as GPIO (e.g. in board setup) */ + npcs_pin = (unsigned int)spi->controller_data; +@@ -552,10 +549,8 @@ static int __init atmel_spi_probe(struct platform_device *pdev) + goto out_free_buffer; + as->irq = irq; + as->clk = clk; +-#ifdef CONFIG_ARCH_AT91 + if (!cpu_is_at91rm9200()) + as->new_1 = 1; +-#endif + + ret = request_irq(irq, atmel_spi_interrupt, 0, + pdev->dev.bus_id, master); +diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig +index 8372ace..2fcbbd4 100644 +--- a/drivers/video/Kconfig ++++ b/drivers/video/Kconfig +@@ -674,6 +674,22 @@ config FB_S1D13XXX + working with S1D13806). Product specs at + <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> + ++config FB_ATMEL ++ tristate "AT91/AT32 LCD Controller support" ++ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32) ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This enables support for the AT91/AT32 LCD Controller. ++ ++config FB_INTSRAM ++ bool "Frame Buffer in internal SRAM" ++ depends on FB_ATMEL && ARCH_AT91SAM9261 ++ help ++ Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want ++ to let frame buffer in external SDRAM. ++ + config FB_NVIDIA + tristate "nVidia Framebuffer Support" + depends on FB && PCI +diff --git a/drivers/video/Makefile b/drivers/video/Makefile +index 760305c..17a09c6 100644 +--- a/drivers/video/Makefile ++++ b/drivers/video/Makefile +@@ -75,6 +75,7 @@ obj-$(CONFIG_FB_G364) += g364fb.o + obj-$(CONFIG_FB_SA1100) += sa1100fb.o + obj-$(CONFIG_FB_HIT) += hitfb.o + obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o ++obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o + obj-$(CONFIG_FB_PVR2) += pvr2fb.o + obj-$(CONFIG_FB_VOODOO1) += sstfb.o + obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o +diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c +new file mode 100644 +index 0000000..e1d5bd0 +--- /dev/null ++++ b/drivers/video/atmel_lcdfb.c +@@ -0,0 +1,752 @@ ++/* ++ * Driver for AT91/AT32 LCD Controller ++ * ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive for ++ * more details. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/platform_device.h> ++#include <linux/dma-mapping.h> ++#include <linux/interrupt.h> ++#include <linux/clk.h> ++#include <linux/fb.h> ++#include <linux/init.h> ++#include <linux/delay.h> ++ ++#include <asm/arch/board.h> ++#include <asm/arch/cpu.h> ++#include <asm/arch/gpio.h> ++ ++#include <video/atmel_lcdc.h> ++ ++#define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg)) ++#define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg)) ++ ++/* configurable parameters */ ++#define ATMEL_LCDC_CVAL_DEFAULT 0xc8 ++#define ATMEL_LCDC_DMA_BURST_LEN 8 ++ ++#if defined(CONFIG_ARCH_AT91SAM9263) ++#define ATMEL_LCDC_FIFO_SIZE 2048 ++#else ++#define ATMEL_LCDC_FIFO_SIZE 512 ++#endif ++ ++#if defined(CONFIG_ARCH_AT91) ++#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT ++ ++static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo, ++ struct fb_var_screeninfo *var) ++{ ++ ++} ++#elif defined(CONFIG_AVR32) ++#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \ ++ | FBINFO_PARTIAL_PAN_OK \ ++ | FBINFO_HWACCEL_XPAN \ ++ | FBINFO_HWACCEL_YPAN) ++ ++static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo, ++ struct fb_var_screeninfo *var) ++{ ++ u32 dma2dcfg; ++ u32 pixeloff; ++ ++ pixeloff = (var->xoffset * var->bits_per_pixel) & 0x1f; ++ ++ dma2dcfg = ((var->xres_virtual - var->xres) * var->bits_per_pixel) / 8; ++ dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET; ++ lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg); ++ ++ /* Update configuration */ ++ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, ++ lcdc_readl(sinfo, ATMEL_LCDC_DMACON) ++ | ATMEL_LCDC_DMAUPDT); ++} ++#endif ++ ++ ++static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = { ++ .type = FB_TYPE_PACKED_PIXELS, ++ .visual = FB_VISUAL_TRUECOLOR, ++ .xpanstep = 0, ++ .ypanstep = 0, ++ .ywrapstep = 0, ++ .accel = FB_ACCEL_NONE, ++}; ++ ++ ++static void atmel_lcdfb_update_dma(struct fb_info *info, ++ struct fb_var_screeninfo *var) ++{ ++ struct atmel_lcdfb_info *sinfo = info->par; ++ struct fb_fix_screeninfo *fix = &info->fix; ++ unsigned long dma_addr; ++ ++ dma_addr = (fix->smem_start + var->yoffset * fix->line_length ++ + var->xoffset * var->bits_per_pixel / 8); ++ ++ dma_addr &= ~3UL; ++ ++ /* Set framebuffer DMA base address and pixel offset */ ++ lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr); ++ ++ atmel_lcdfb_update_dma2d(sinfo, var); ++} ++ ++static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo) ++{ ++ struct fb_info *info = sinfo->info; ++ ++ dma_free_writecombine(info->device, info->fix.smem_len, ++ info->screen_base, info->fix.smem_start); ++} ++ ++/** ++ * atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory ++ * @sinfo: the frame buffer to allocate memory for ++ */ ++static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo) ++{ ++ struct fb_info *info = sinfo->info; ++ struct fb_var_screeninfo *var = &info->var; ++ ++ info->fix.smem_len = (var->xres_virtual * var->yres_virtual ++ * ((var->bits_per_pixel + 7) / 8)); ++ ++ info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len, ++ (dma_addr_t *)&info->fix.smem_start, GFP_KERNEL); ++ ++ if (!info->screen_base) { ++ return -ENOMEM; ++ } ++ ++ return 0; ++} ++ ++/** ++ * atmel_lcdfb_check_var - Validates a var passed in. ++ * @var: frame buffer variable screen structure ++ * @info: frame buffer structure that represents a single frame buffer ++ * ++ * Checks to see if the hardware supports the state requested by ++ * var passed in. This function does not alter the hardware ++ * state!!! This means the data stored in struct fb_info and ++ * struct atmel_lcdfb_info do not change. This includes the var ++ * inside of struct fb_info. Do NOT change these. This function ++ * can be called on its own if we intent to only test a mode and ++ * not actually set it. The stuff in modedb.c is a example of ++ * this. If the var passed in is slightly off by what the ++ * hardware can support then we alter the var PASSED in to what ++ * we can do. If the hardware doesn't support mode change a ++ * -EINVAL will be returned by the upper layers. You don't need ++ * to implement this function then. If you hardware doesn't ++ * support changing the resolution then this function is not ++ * needed. In this case the driver would just provide a var that ++ * represents the static state the screen is in. ++ * ++ * Returns negative errno on error, or zero on success. ++ */ ++static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var, ++ struct fb_info *info) ++{ ++ struct device *dev = info->device; ++ struct atmel_lcdfb_info *sinfo = info->par; ++ unsigned long clk_value_khz; ++ ++ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000; ++ ++ dev_dbg(dev, "%s:\n", __func__); ++ dev_dbg(dev, " resolution: %ux%u\n", var->xres, var->yres); ++ dev_dbg(dev, " pixclk: %lu KHz\n", PICOS2KHZ(var->pixclock)); ++ dev_dbg(dev, " bpp: %u\n", var->bits_per_pixel); ++ dev_dbg(dev, " clk: %lu KHz\n", clk_value_khz); ++ ++ if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) { ++ dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock)); ++ return -EINVAL; ++ } ++ ++ /* Force same alignment for each line */ ++ var->xres = (var->xres + 3) & ~3UL; ++ var->xres_virtual = (var->xres_virtual + 3) & ~3UL; ++ ++ var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0; ++ var->transp.msb_right = 0; ++ var->transp.offset = var->transp.length = 0; ++ var->xoffset = var->yoffset = 0; ++ ++ switch (var->bits_per_pixel) { ++ case 2: ++ case 4: ++ case 8: ++ var->red.offset = var->green.offset = var->blue.offset = 0; ++ var->red.length = var->green.length = var->blue.length ++ = var->bits_per_pixel; ++ break; ++ case 15: ++ case 16: ++ var->red.offset = 0; ++ var->green.offset = 5; ++ var->blue.offset = 10; ++ var->red.length = var->green.length = var->blue.length = 5; ++ break; ++ case 24: ++ case 32: ++ var->red.offset = 0; ++ var->green.offset = 8; ++ var->blue.offset = 16; ++ var->red.length = var->green.length = var->blue.length = 8; ++ break; ++ default: ++ dev_err(dev, "color depth %d not supported\n", ++ var->bits_per_pixel); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * atmel_lcdfb_set_par - Alters the hardware state. ++ * @info: frame buffer structure that represents a single frame buffer ++ * ++ * Using the fb_var_screeninfo in fb_info we set the resolution ++ * of the this particular framebuffer. This function alters the ++ * par AND the fb_fix_screeninfo stored in fb_info. It doesn't ++ * not alter var in fb_info since we are using that data. This ++ * means we depend on the data in var inside fb_info to be ++ * supported by the hardware. atmel_lcdfb_check_var is always called ++ * before atmel_lcdfb_set_par to ensure this. Again if you can't ++ * change the resolution you don't need this function. ++ * ++ */ ++static int atmel_lcdfb_set_par(struct fb_info *info) ++{ ++ struct atmel_lcdfb_info *sinfo = info->par; ++ unsigned long value; ++ unsigned long clk_value_khz; ++ ++ dev_dbg(info->device, "%s:\n", __func__); ++ dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n", ++ info->var.xres, info->var.yres, ++ info->var.xres_virtual, info->var.yres_virtual); ++ ++ /* Turn off the LCD controller and the DMA controller */ ++ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET); ++ ++ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0); ++ ++ if (info->var.bits_per_pixel <= 8) ++ info->fix.visual = FB_VISUAL_PSEUDOCOLOR; ++ else ++ info->fix.visual = FB_VISUAL_TRUECOLOR; ++ ++ info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8); ++ ++ /* Re-initialize the DMA engine... */ ++ dev_dbg(info->device, " * update DMA engine\n"); ++ atmel_lcdfb_update_dma(info, &info->var); ++ ++ /* ...set frame size and burst length = 8 words (?) */ ++ value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32; ++ value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET); ++ lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value); ++ ++ /* Now, the LCDC core... */ ++ ++ /* Set pixel clock */ ++ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000; ++ ++ value = clk_value_khz / PICOS2KHZ(info->var.pixclock); ++ ++ if (clk_value_khz % PICOS2KHZ(info->var.pixclock)) ++ value++; ++ ++ value = (value / 2) - 1; ++ ++ if (value <= 0) { ++ dev_notice(info->device, "Bypassing pixel clock divider\n"); ++ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS); ++ } else ++ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET); ++ ++ /* Initialize control register 2 */ ++ value = sinfo->default_lcdcon2; ++ ++ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT)) ++ value |= ATMEL_LCDC_INVLINE_INVERTED; ++ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT)) ++ value |= ATMEL_LCDC_INVFRAME_INVERTED; ++ ++ switch (info->var.bits_per_pixel) { ++ case 1: value |= ATMEL_LCDC_PIXELSIZE_1; break; ++ case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break; ++ case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break; ++ case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break; ++ case 15: /* fall through */ ++ case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break; ++ case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break; ++ case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break; ++ default: BUG(); break; ++ } ++ dev_dbg(info->device, " * LCDCON2 = %08lx\n", value); ++ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value); ++ ++ /* Vertical timing */ ++ value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET; ++ value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET; ++ value |= info->var.lower_margin; ++ dev_dbg(info->device, " * LCDTIM1 = %08lx\n", value); ++ lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value); ++ ++ /* Horizontal timing */ ++ value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET; ++ value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET; ++ value |= (info->var.left_margin - 1); ++ dev_dbg(info->device, " * LCDTIM2 = %08lx\n", value); ++ lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value); ++ ++ /* Display size */ ++ value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET; ++ value |= info->var.yres - 1; ++ lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value); ++ ++ /* FIFO Threshold: Use formula from data sheet */ ++ value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3); ++ lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value); ++ ++ /* Toggle LCD_MODE every frame */ ++ lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0); ++ ++ /* Disable all interrupts */ ++ lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL); ++ ++ /* Set contrast */ ++ value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE; ++ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value); ++ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT); ++ /* ...wait for DMA engine to become idle... */ ++ while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY) ++ msleep(10); ++ ++ dev_dbg(info->device, " * re-enable DMA engine\n"); ++ /* ...and enable it with updated configuration */ ++ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon); ++ ++ dev_dbg(info->device, " * re-enable LCDC core\n"); ++ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, ++ (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR); ++ ++ dev_dbg(info->device, " * DONE\n"); ++ ++ return 0; ++} ++ ++static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf) ++{ ++ chan &= 0xffff; ++ chan >>= 16 - bf->length; ++ return chan << bf->offset; ++} ++ ++/** ++ * atmel_lcdfb_setcolreg - Optional function. Sets a color register. ++ * @regno: Which register in the CLUT we are programming ++ * @red: The red value which can be up to 16 bits wide ++ * @green: The green value which can be up to 16 bits wide ++ * @blue: The blue value which can be up to 16 bits wide. ++ * @transp: If supported the alpha value which can be up to 16 bits wide. ++ * @info: frame buffer info structure ++ * ++ * Set a single color register. The values supplied have a 16 bit ++ * magnitude which needs to be scaled in this function for the hardware. ++ * Things to take into consideration are how many color registers, if ++ * any, are supported with the current color visual. With truecolor mode ++ * no color palettes are supported. Here a psuedo palette is created ++ * which we store the value in pseudo_palette in struct fb_info. For ++ * pseudocolor mode we have a limited color palette. To deal with this ++ * we can program what color is displayed for a particular pixel value. ++ * DirectColor is similar in that we can program each color field. If ++ * we have a static colormap we don't need to implement this function. ++ * ++ * Returns negative errno on error, or zero on success. In an ++ * ideal world, this would have been the case, but as it turns ++ * out, the other drivers return 1 on failure, so that's what ++ * we're going to do. ++ */ ++static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red, ++ unsigned int green, unsigned int blue, ++ unsigned int transp, struct fb_info *info) ++{ ++ struct atmel_lcdfb_info *sinfo = info->par; ++ unsigned int val; ++ u32 *pal; ++ int ret = 1; ++ ++ if (info->var.grayscale) ++ red = green = blue = (19595 * red + 38470 * green ++ + 7471 * blue) >> 16; ++ ++ switch (info->fix.visual) { ++ case FB_VISUAL_TRUECOLOR: ++ if (regno < 16) { ++ pal = info->pseudo_palette; ++ ++ val = chan_to_field(red, &info->var.red); ++ val |= chan_to_field(green, &info->var.green); ++ val |= chan_to_field(blue, &info->var.blue); ++ ++ pal[regno] = val; ++ ret = 0; ++ } ++ break; ++ ++ case FB_VISUAL_PSEUDOCOLOR: ++ if (regno < 256) { ++ val = ((red >> 11) & 0x001f); ++ val |= ((green >> 6) & 0x03e0); ++ val |= ((blue >> 1) & 0x7c00); ++ ++ /* ++ * TODO: intensity bit. Maybe something like ++ * ~(red[10] ^ green[10] ^ blue[10]) & 1 ++ */ ++ ++ lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val); ++ ret = 0; ++ } ++ break; ++ } ++ ++ return ret; ++} ++ ++static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var, ++ struct fb_info *info) ++{ ++ dev_dbg(info->device, "%s\n", __func__); ++ ++ atmel_lcdfb_update_dma(info, var); ++ ++ return 0; ++} ++ ++static struct fb_ops atmel_lcdfb_ops = { ++ .owner = THIS_MODULE, ++ .fb_check_var = atmel_lcdfb_check_var, ++ .fb_set_par = atmel_lcdfb_set_par, ++ .fb_setcolreg = atmel_lcdfb_setcolreg, ++ .fb_pan_display = atmel_lcdfb_pan_display, ++ .fb_fillrect = cfb_fillrect, ++ .fb_copyarea = cfb_copyarea, ++ .fb_imageblit = cfb_imageblit, ++}; ++ ++static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id) ++{ ++ struct fb_info *info = dev_id; ++ struct atmel_lcdfb_info *sinfo = info->par; ++ u32 status; ++ ++ status = lcdc_readl(sinfo, ATMEL_LCDC_ISR); ++ lcdc_writel(sinfo, ATMEL_LCDC_IDR, status); ++ return IRQ_HANDLED; ++} ++ ++static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo) ++{ ++ struct fb_info *info = sinfo->info; ++ int ret = 0; ++ ++ memset_io(info->screen_base, 0, info->fix.smem_len); ++ info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW; ++ ++ dev_info(info->device, ++ "%luKiB frame buffer at %08lx (mapped at %p)\n", ++ (unsigned long)info->fix.smem_len / 1024, ++ (unsigned long)info->fix.smem_start, ++ info->screen_base); ++ ++ /* Allocate colormap */ ++ ret = fb_alloc_cmap(&info->cmap, 256, 0); ++ if (ret < 0) ++ dev_err(info->device, "Alloc color map failed\n"); ++ ++ return ret; ++} ++ ++static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo) ++{ ++ if (sinfo->bus_clk) ++ clk_enable(sinfo->bus_clk); ++ clk_enable(sinfo->lcdc_clk); ++} ++ ++static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo) ++{ ++ if (sinfo->bus_clk) ++ clk_disable(sinfo->bus_clk); ++ clk_disable(sinfo->lcdc_clk); ++} ++ ++ ++static int __init atmel_lcdfb_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct fb_info *info; ++ struct atmel_lcdfb_info *sinfo; ++ struct atmel_lcdfb_info *pdata_sinfo; ++ struct resource *regs = NULL; ++ struct resource *map = NULL; ++ int ret; ++ ++ dev_dbg(dev, "%s BEGIN\n", __func__); ++ ++ ret = -ENOMEM; ++ info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev); ++ if (!info) { ++ dev_err(dev, "cannot allocate memory\n"); ++ goto out; ++ } ++ ++ sinfo = info->par; ++ ++ if (dev->platform_data) { ++ pdata_sinfo = (struct atmel_lcdfb_info *)dev->platform_data; ++ sinfo->default_bpp = pdata_sinfo->default_bpp; ++ sinfo->default_dmacon = pdata_sinfo->default_dmacon; ++ sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2; ++ sinfo->default_monspecs = pdata_sinfo->default_monspecs; ++ sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control; ++ sinfo->guard_time = pdata_sinfo->guard_time; ++ } else { ++ dev_err(dev, "cannot get default configuration\n"); ++ goto free_info; ++ } ++ sinfo->info = info; ++ sinfo->pdev = pdev; ++ ++ strcpy(info->fix.id, sinfo->pdev->name); ++ info->flags = ATMEL_LCDFB_FBINFO_DEFAULT; ++ info->pseudo_palette = sinfo->pseudo_palette; ++ info->fbops = &atmel_lcdfb_ops; ++ ++ memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs)); ++ info->fix = atmel_lcdfb_fix; ++ ++ /* Enable LCDC Clocks */ ++ if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) { ++ sinfo->bus_clk = clk_get(dev, "hck1"); ++ if (IS_ERR(sinfo->bus_clk)) { ++ ret = PTR_ERR(sinfo->bus_clk); ++ goto free_info; ++ } ++ } ++ sinfo->lcdc_clk = clk_get(dev, "lcdc_clk"); ++ if (IS_ERR(sinfo->lcdc_clk)) { ++ ret = PTR_ERR(sinfo->lcdc_clk); ++ goto put_bus_clk; ++ } ++ atmel_lcdfb_start_clock(sinfo); ++ ++ ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb, ++ info->monspecs.modedb_len, info->monspecs.modedb, ++ sinfo->default_bpp); ++ if (!ret) { ++ dev_err(dev, "no suitable video mode found\n"); ++ goto stop_clk; ++ } ++ ++ ++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!regs) { ++ dev_err(dev, "resources unusable\n"); ++ ret = -ENXIO; ++ goto stop_clk; ++ } ++ ++ sinfo->irq_base = platform_get_irq(pdev, 0); ++ if (sinfo->irq_base < 0) { ++ dev_err(dev, "unable to get irq\n"); ++ ret = sinfo->irq_base; ++ goto stop_clk; ++ } ++ ++ /* Initialize video memory */ ++ map = platform_get_resource(pdev, IORESOURCE_MEM, 1); ++ if (map) { ++ /* use a pre-allocated memory buffer */ ++ info->fix.smem_start = map->start; ++ info->fix.smem_len = map->end - map->start + 1; ++ if (!request_mem_region(info->fix.smem_start, ++ info->fix.smem_len, pdev->name)) { ++ ret = -EBUSY; ++ goto stop_clk; ++ } ++ ++ info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len); ++ if (!info->screen_base) ++ goto release_intmem; ++ } else { ++ /* alocate memory buffer */ ++ ret = atmel_lcdfb_alloc_video_memory(sinfo); ++ if (ret < 0) { ++ dev_err(dev, "cannot allocate framebuffer: %d\n", ret); ++ goto stop_clk; ++ } ++ } ++ ++ /* LCDC registers */ ++ info->fix.mmio_start = regs->start; ++ info->fix.mmio_len = regs->end - regs->start + 1; ++ ++ if (!request_mem_region(info->fix.mmio_start, ++ info->fix.mmio_len, pdev->name)) { ++ ret = -EBUSY; ++ goto free_fb; ++ } ++ ++ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len); ++ if (!sinfo->mmio) { ++ dev_err(dev, "cannot map LCDC registers\n"); ++ goto release_mem; ++ } ++ ++ /* interrupt */ ++ ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info); ++ if (ret) { ++ dev_err(dev, "request_irq failed: %d\n", ret); ++ goto unmap_mmio; ++ } ++ ++ ret = atmel_lcdfb_init_fbinfo(sinfo); ++ if (ret < 0) { ++ dev_err(dev, "init fbinfo failed: %d\n", ret); ++ goto unregister_irqs; ++ } ++ ++ /* ++ * This makes sure that our colour bitfield ++ * descriptors are correctly initialised. ++ */ ++ atmel_lcdfb_check_var(&info->var, info); ++ ++ ret = fb_set_var(info, &info->var); ++ if (ret) { ++ dev_warn(dev, "unable to set display parameters\n"); ++ goto free_cmap; ++ } ++ ++ dev_set_drvdata(dev, info); ++ ++ /* ++ * Tell the world that we're ready to go ++ */ ++ ret = register_framebuffer(info); ++ if (ret < 0) { ++ dev_err(dev, "failed to register framebuffer device: %d\n", ret); ++ goto free_cmap; ++ } ++ ++ /* Power up the LCDC screen */ ++ if (sinfo->atmel_lcdfb_power_control) ++ sinfo->atmel_lcdfb_power_control(1); ++ ++ dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n", ++ info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base); ++ ++ return 0; ++ ++ ++free_cmap: ++ fb_dealloc_cmap(&info->cmap); ++unregister_irqs: ++ free_irq(sinfo->irq_base, info); ++unmap_mmio: ++ iounmap(sinfo->mmio); ++release_mem: ++ release_mem_region(info->fix.mmio_start, info->fix.mmio_len); ++free_fb: ++ if (map) ++ iounmap(info->screen_base); ++ else ++ atmel_lcdfb_free_video_memory(sinfo); ++ ++release_intmem: ++ if (map) ++ release_mem_region(info->fix.smem_start, info->fix.smem_len); ++stop_clk: ++ atmel_lcdfb_stop_clock(sinfo); ++ clk_put(sinfo->lcdc_clk); ++put_bus_clk: ++ if (sinfo->bus_clk) ++ clk_put(sinfo->bus_clk); ++free_info: ++ framebuffer_release(info); ++out: ++ dev_dbg(dev, "%s FAILED\n", __func__); ++ return ret; ++} ++ ++static int __exit atmel_lcdfb_remove(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct fb_info *info = dev_get_drvdata(dev); ++ struct atmel_lcdfb_info *sinfo = info->par; ++ ++ if (!sinfo) ++ return 0; ++ ++ if (sinfo->atmel_lcdfb_power_control) ++ sinfo->atmel_lcdfb_power_control(0); ++ unregister_framebuffer(info); ++ atmel_lcdfb_stop_clock(sinfo); ++ clk_put(sinfo->lcdc_clk); ++ if (sinfo->bus_clk) ++ clk_put(sinfo->bus_clk); ++ fb_dealloc_cmap(&info->cmap); ++ free_irq(sinfo->irq_base, info); ++ iounmap(sinfo->mmio); ++ release_mem_region(info->fix.mmio_start, info->fix.mmio_len); ++ if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) { ++ iounmap(info->screen_base); ++ release_mem_region(info->fix.smem_start, info->fix.smem_len); ++ } else { ++ atmel_lcdfb_free_video_memory(sinfo); ++ } ++ ++ dev_set_drvdata(dev, NULL); ++ framebuffer_release(info); ++ ++ return 0; ++} ++ ++static struct platform_driver atmel_lcdfb_driver = { ++ .remove = __exit_p(atmel_lcdfb_remove), ++ .driver = { ++ .name = "atmel_lcdfb", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init atmel_lcdfb_init(void) ++{ ++ return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe); ++} ++ ++static void __exit atmel_lcdfb_exit(void) ++{ ++ platform_driver_unregister(&atmel_lcdfb_driver); ++} ++ ++module_init(atmel_lcdfb_init); ++module_exit(atmel_lcdfb_exit); ++ ++MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver"); ++MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@rfo.atmel.com>"); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig +index 47d15b5..b59d5bb 100644 +--- a/drivers/video/backlight/Kconfig ++++ b/drivers/video/backlight/Kconfig +@@ -8,26 +8,44 @@ menuconfig BACKLIGHT_LCD_SUPPORT + Enable this to be able to choose the drivers for controlling the + backlight and the LCD panel on some platforms, for example on PDAs. + +-config BACKLIGHT_CLASS_DEVICE +- tristate "Lowlevel Backlight controls" ++# ++# LCD ++# ++config LCD_CLASS_DEVICE ++ tristate "Lowlevel LCD controls" + depends on BACKLIGHT_LCD_SUPPORT + default m + help +- This framework adds support for low-level control of the LCD +- backlight. This includes support for brightness and power. ++ This framework adds support for low-level control of LCD. ++ Some framebuffer devices connect to platform-specific LCD modules ++ in order to have a platform-specific way to control the flat panel ++ (contrast and applying power to the LCD (not to the backlight!)). + + To have support for your specific LCD panel you will have to + select the proper drivers which depend on this option. + +-config LCD_CLASS_DEVICE +- tristate "Lowlevel LCD controls" ++config LCD_LTV350QV ++ tristate "Samsung LTV350QV LCD Panel" ++ depends on LCD_CLASS_DEVICE && SPI_MASTER ++ default n ++ help ++ If you have a Samsung LTV350QV LCD panel, say y to include a ++ power control driver for it. The panel starts up in power ++ off state, so you need this driver in order to see any ++ output. ++ ++ The LTV350QV panel is present on all ATSTK1000 boards. ++ ++# ++# Backlight ++# ++config BACKLIGHT_CLASS_DEVICE ++ tristate "Lowlevel Backlight controls" + depends on BACKLIGHT_LCD_SUPPORT + default m + help +- This framework adds support for low-level control of LCD. +- Some framebuffer devices connect to platform-specific LCD modules +- in order to have a platform-specific way to control the flat panel +- (contrast and applying power to the LCD (not to the backlight!)). ++ This framework adds support for low-level control of the LCD ++ backlight. This includes support for brightness and power. + + To have support for your specific LCD panel you will have to + select the proper drivers which depend on this option. +diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile +index 0c3ce46..526c54b 100644 +--- a/drivers/video/backlight/Makefile ++++ b/drivers/video/backlight/Makefile +@@ -1,6 +1,8 @@ + # Backlight & LCD drivers + + obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o ++obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o ++ + obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o + obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o + obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o +diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c +new file mode 100644 +index 0000000..342b97a +--- /dev/null ++++ b/drivers/video/backlight/ltv350qv.c +@@ -0,0 +1,340 @@ ++/* ++ * Power control for Samsung LTV350QV Quarter VGA LCD Panel ++ * ++ * Copyright (C) 2006, 2007 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#include <linux/delay.h> ++#include <linux/err.h> ++#include <linux/fb.h> ++#include <linux/init.h> ++#include <linux/lcd.h> ++#include <linux/module.h> ++#include <linux/spi/spi.h> ++ ++#include "ltv350qv.h" ++ ++#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) ++ ++struct ltv350qv { ++ struct spi_device *spi; ++ u8 *buffer; ++ int power; ++ struct lcd_device *ld; ++}; ++ ++/* ++ * The power-on and power-off sequences are taken from the ++ * LTV350QV-F04 data sheet from Samsung. The register definitions are ++ * taken from the S6F2002 command list also from Samsung. Both ++ * documents are distributed with the AVR32 Linux BSP CD from Atmel. ++ * ++ * There's still some voodoo going on here, but it's a lot better than ++ * in the first incarnation of the driver where all we had was the raw ++ * numbers from the initialization sequence. ++ */ ++static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val) ++{ ++ struct spi_message msg; ++ struct spi_transfer index_xfer = { ++ .len = 3, ++ .cs_change = 1, ++ }; ++ struct spi_transfer value_xfer = { ++ .len = 3, ++ .cs_change = 1, ++ }; ++ ++ spi_message_init(&msg); ++ ++ /* register index */ ++ lcd->buffer[0] = LTV_OPC_INDEX; ++ lcd->buffer[1] = 0x00; ++ lcd->buffer[2] = reg & 0x7f; ++ index_xfer.tx_buf = lcd->buffer; ++ spi_message_add_tail(&index_xfer, &msg); ++ ++ /* register value */ ++ lcd->buffer[4] = LTV_OPC_DATA; ++ lcd->buffer[5] = val >> 8; ++ lcd->buffer[6] = val; ++ value_xfer.tx_buf = lcd->buffer + 4; ++ spi_message_add_tail(&value_xfer, &msg); ++ ++ return spi_sync(lcd->spi, &msg); ++} ++ ++/* The comments are taken straight from the data sheet */ ++static int ltv350qv_power_on(struct ltv350qv *lcd) ++{ ++ int ret; ++ ++ /* Power On Reset Display off State */ ++ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000)) ++ goto err; ++ msleep(15); ++ ++ /* Power Setting Function 1 */ ++ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE)) ++ goto err; ++ if (ltv350qv_write_reg(lcd, LTV_PWRCTL2, LTV_VCOML_ENABLE)) ++ goto err_power1; ++ ++ /* Power Setting Function 2 */ ++ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, ++ LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5) ++ | LTV_SUPPLY_CURRENT(5))) ++ goto err_power2; ++ ++ msleep(55); ++ ++ /* Instruction Setting */ ++ ret = ltv350qv_write_reg(lcd, LTV_IFCTL, ++ LTV_NMD | LTV_REV | LTV_NL(0x1d)); ++ ret |= ltv350qv_write_reg(lcd, LTV_DATACTL, ++ LTV_DS_SAME | LTV_CHS_480 ++ | LTV_DF_RGB | LTV_RGB_BGR); ++ ret |= ltv350qv_write_reg(lcd, LTV_ENTRY_MODE, ++ LTV_VSPL_ACTIVE_LOW ++ | LTV_HSPL_ACTIVE_LOW ++ | LTV_DPL_SAMPLE_RISING ++ | LTV_EPL_ACTIVE_LOW ++ | LTV_SS_RIGHT_TO_LEFT); ++ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL1, LTV_CLW(3)); ++ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2, ++ LTV_NW_INV_1LINE | LTV_FWI(3)); ++ ret |= ltv350qv_write_reg(lcd, LTV_VBP, 0x000a); ++ ret |= ltv350qv_write_reg(lcd, LTV_HBP, 0x0021); ++ ret |= ltv350qv_write_reg(lcd, LTV_SOTCTL, LTV_SDT(3) | LTV_EQ(0)); ++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(0), 0x0103); ++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(1), 0x0301); ++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(2), 0x1f0f); ++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(3), 0x1f0f); ++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(4), 0x0707); ++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(5), 0x0307); ++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(6), 0x0707); ++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(7), 0x0000); ++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(8), 0x0004); ++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(9), 0x0000); ++ if (ret) ++ goto err_settings; ++ ++ /* Wait more than 2 frames */ ++ msleep(20); ++ ++ /* Display On Sequence */ ++ ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1, ++ LTV_VCOM_DISABLE | LTV_VCOMOUT_ENABLE ++ | LTV_POWER_ON | LTV_DRIVE_CURRENT(5) ++ | LTV_SUPPLY_CURRENT(5)); ++ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2, ++ LTV_NW_INV_1LINE | LTV_DSC | LTV_FWI(3)); ++ if (ret) ++ goto err_disp_on; ++ ++ /* Display should now be ON. Phew. */ ++ return 0; ++ ++err_disp_on: ++ /* ++ * Try to recover. Error handling probably isn't very useful ++ * at this point, just make a best effort to switch the panel ++ * off. ++ */ ++ ltv350qv_write_reg(lcd, LTV_PWRCTL1, ++ LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5) ++ | LTV_SUPPLY_CURRENT(5)); ++ ltv350qv_write_reg(lcd, LTV_GATECTL2, ++ LTV_NW_INV_1LINE | LTV_FWI(3)); ++err_settings: ++err_power2: ++err_power1: ++ ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000); ++ msleep(1); ++err: ++ ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE); ++ return -EIO; ++} ++ ++static int ltv350qv_power_off(struct ltv350qv *lcd) ++{ ++ int ret; ++ ++ /* Display Off Sequence */ ++ ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1, ++ LTV_VCOM_DISABLE ++ | LTV_DRIVE_CURRENT(5) ++ | LTV_SUPPLY_CURRENT(5)); ++ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2, ++ LTV_NW_INV_1LINE | LTV_FWI(3)); ++ ++ /* Power down setting 1 */ ++ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000); ++ ++ /* Wait at least 1 ms */ ++ msleep(1); ++ ++ /* Power down setting 2 */ ++ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE); ++ ++ /* ++ * No point in trying to recover here. If we can't switch the ++ * panel off, what are we supposed to do other than inform the ++ * user about the failure? ++ */ ++ if (ret) ++ return -EIO; ++ ++ /* Display power should now be OFF */ ++ return 0; ++} ++ ++static int ltv350qv_power(struct ltv350qv *lcd, int power) ++{ ++ int ret = 0; ++ ++ if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power)) ++ ret = ltv350qv_power_on(lcd); ++ else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power)) ++ ret = ltv350qv_power_off(lcd); ++ ++ if (!ret) ++ lcd->power = power; ++ ++ return ret; ++} ++ ++static int ltv350qv_set_power(struct lcd_device *ld, int power) ++{ ++ struct ltv350qv *lcd; ++ ++ lcd = class_get_devdata(&ld->class_dev); ++ return ltv350qv_power(lcd, power); ++} ++ ++static int ltv350qv_get_power(struct lcd_device *ld) ++{ ++ struct ltv350qv *lcd; ++ ++ lcd = class_get_devdata(&ld->class_dev); ++ return lcd->power; ++} ++ ++static struct lcd_ops ltv_ops = { ++ .get_power = ltv350qv_get_power, ++ .set_power = ltv350qv_set_power, ++}; ++ ++static int __devinit ltv350qv_probe(struct spi_device *spi) ++{ ++ struct ltv350qv *lcd; ++ struct lcd_device *ld; ++ int ret; ++ ++ lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL); ++ if (!lcd) ++ return -ENOMEM; ++ ++ lcd->spi = spi; ++ lcd->power = FB_BLANK_POWERDOWN; ++ lcd->buffer = kzalloc(8, GFP_KERNEL); ++ ++ ld = lcd_device_register("ltv350qv", lcd, <v_ops); ++ if (IS_ERR(ld)) { ++ ret = PTR_ERR(ld); ++ goto out_free_lcd; ++ } ++ lcd->ld = ld; ++ ++ ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK); ++ if (ret) ++ goto out_unregister; ++ ++ dev_set_drvdata(&spi->dev, lcd); ++ ++ return 0; ++ ++out_unregister: ++ lcd_device_unregister(ld); ++out_free_lcd: ++ kfree(lcd); ++ return ret; ++} ++ ++static int __devexit ltv350qv_remove(struct spi_device *spi) ++{ ++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev); ++ ++ ltv350qv_power(lcd, FB_BLANK_POWERDOWN); ++ lcd_device_unregister(lcd->ld); ++ kfree(lcd); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++static int ltv350qv_suspend(struct spi_device *spi, ++ pm_message_t state, u32 level) ++{ ++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev); ++ ++ if (level == SUSPEND_POWER_DOWN) ++ return ltv350qv_power(lcd, FB_BLANK_POWERDOWN); ++ ++ return 0; ++} ++ ++static int ltv350qv_resume(struct spi_device *spi, u32 level) ++{ ++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev); ++ ++ if (level == RESUME_POWER_ON) ++ return ltv350qv_power(lcd, FB_BLANK_UNBLANK); ++ ++ return 0; ++} ++#else ++#define ltv350qv_suspend NULL ++#define ltv350qv_resume NULL ++#endif ++ ++/* Power down all displays on reboot, poweroff or halt */ ++static void ltv350qv_shutdown(struct spi_device *spi) ++{ ++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev); ++ ++ ltv350qv_power(lcd, FB_BLANK_POWERDOWN); ++} ++ ++static struct spi_driver ltv350qv_driver = { ++ .driver = { ++ .name = "ltv350qv", ++ .bus = &spi_bus_type, ++ .owner = THIS_MODULE, ++ }, ++ ++ .probe = ltv350qv_probe, ++ .remove = __devexit_p(ltv350qv_remove), ++ .shutdown = ltv350qv_shutdown, ++ .suspend = ltv350qv_suspend, ++ .resume = ltv350qv_resume, ++}; ++ ++static int __init ltv350qv_init(void) ++{ ++ return spi_register_driver(<v350qv_driver); ++} ++ ++static void __exit ltv350qv_exit(void) ++{ ++ spi_unregister_driver(<v350qv_driver); ++} ++module_init(ltv350qv_init); ++module_exit(ltv350qv_exit); ++ ++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); ++MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver"); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/video/backlight/ltv350qv.h b/drivers/video/backlight/ltv350qv.h +new file mode 100644 +index 0000000..189112e +--- /dev/null ++++ b/drivers/video/backlight/ltv350qv.h +@@ -0,0 +1,95 @@ ++/* ++ * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel ++ * ++ * Copyright (C) 2006, 2007 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#ifndef __LTV350QV_H ++#define __LTV350QV_H ++ ++#define LTV_OPC_INDEX 0x74 ++#define LTV_OPC_DATA 0x76 ++ ++#define LTV_ID 0x00 /* ID Read */ ++#define LTV_IFCTL 0x01 /* Display Interface Control */ ++#define LTV_DATACTL 0x02 /* Display Data Control */ ++#define LTV_ENTRY_MODE 0x03 /* Entry Mode */ ++#define LTV_GATECTL1 0x04 /* Gate Control 1 */ ++#define LTV_GATECTL2 0x05 /* Gate Control 2 */ ++#define LTV_VBP 0x06 /* Vertical Back Porch */ ++#define LTV_HBP 0x07 /* Horizontal Back Porch */ ++#define LTV_SOTCTL 0x08 /* Source Output Timing Control */ ++#define LTV_PWRCTL1 0x09 /* Power Control 1 */ ++#define LTV_PWRCTL2 0x0a /* Power Control 2 */ ++#define LTV_GAMMA(x) (0x10 + (x)) /* Gamma control */ ++ ++/* Bit definitions for LTV_IFCTL */ ++#define LTV_IM (1 << 15) ++#define LTV_NMD (1 << 14) ++#define LTV_SSMD (1 << 13) ++#define LTV_REV (1 << 7) ++#define LTV_NL(x) (((x) & 0x001f) << 0) ++ ++/* Bit definitions for LTV_DATACTL */ ++#define LTV_DS_SAME (0 << 12) ++#define LTV_DS_D_TO_S (1 << 12) ++#define LTV_DS_S_TO_D (2 << 12) ++#define LTV_CHS_384 (0 << 9) ++#define LTV_CHS_480 (1 << 9) ++#define LTV_CHS_492 (2 << 9) ++#define LTV_DF_RGB (0 << 6) ++#define LTV_DF_RGBX (1 << 6) ++#define LTV_DF_XRGB (2 << 6) ++#define LTV_RGB_RGB (0 << 2) ++#define LTV_RGB_BGR (1 << 2) ++#define LTV_RGB_GRB (2 << 2) ++#define LTV_RGB_RBG (3 << 2) ++ ++/* Bit definitions for LTV_ENTRY_MODE */ ++#define LTV_VSPL_ACTIVE_LOW (0 << 15) ++#define LTV_VSPL_ACTIVE_HIGH (1 << 15) ++#define LTV_HSPL_ACTIVE_LOW (0 << 14) ++#define LTV_HSPL_ACTIVE_HIGH (1 << 14) ++#define LTV_DPL_SAMPLE_RISING (0 << 13) ++#define LTV_DPL_SAMPLE_FALLING (1 << 13) ++#define LTV_EPL_ACTIVE_LOW (0 << 12) ++#define LTV_EPL_ACTIVE_HIGH (1 << 12) ++#define LTV_SS_LEFT_TO_RIGHT (0 << 8) ++#define LTV_SS_RIGHT_TO_LEFT (1 << 8) ++#define LTV_STB (1 << 1) ++ ++/* Bit definitions for LTV_GATECTL1 */ ++#define LTV_CLW(x) (((x) & 0x0007) << 12) ++#define LTV_GAON (1 << 5) ++#define LTV_SDR (1 << 3) ++ ++/* Bit definitions for LTV_GATECTL2 */ ++#define LTV_NW_INV_FRAME (0 << 14) ++#define LTV_NW_INV_1LINE (1 << 14) ++#define LTV_NW_INV_2LINE (2 << 14) ++#define LTV_DSC (1 << 12) ++#define LTV_GIF (1 << 8) ++#define LTV_FHN (1 << 7) ++#define LTV_FTI(x) (((x) & 0x0003) << 4) ++#define LTV_FWI(x) (((x) & 0x0003) << 0) ++ ++/* Bit definitions for LTV_SOTCTL */ ++#define LTV_SDT(x) (((x) & 0x0007) << 10) ++#define LTV_EQ(x) (((x) & 0x0007) << 2) ++ ++/* Bit definitions for LTV_PWRCTL1 */ ++#define LTV_VCOM_DISABLE (1 << 14) ++#define LTV_VCOMOUT_ENABLE (1 << 11) ++#define LTV_POWER_ON (1 << 9) ++#define LTV_DRIVE_CURRENT(x) (((x) & 0x0007) << 4) /* 0=off, 5=max */ ++#define LTV_SUPPLY_CURRENT(x) (((x) & 0x0007) << 0) /* 0=off, 5=max */ ++ ++/* Bit definitions for LTV_PWRCTL2 */ ++#define LTV_VCOML_ENABLE (1 << 13) ++#define LTV_VCOML_VOLTAGE(x) (((x) & 0x001f) << 8) /* 0=1V, 31=-1V */ ++#define LTV_VCOMH_VOLTAGE(x) (((x) & 0x001f) << 0) /* 0=3V, 31=4.5V */ ++ ++#endif /* __LTV350QV_H */ +diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c +index 2822526..babf8a9 100644 +--- a/drivers/video/fbmem.c ++++ b/drivers/video/fbmem.c +@@ -1198,6 +1198,10 @@ fb_mmap(struct file *file, struct vm_area_struct * vma) + pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE; + #elif defined(__arm__) || defined(__sh__) || defined(__m32r__) + vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); ++#elif defined(__avr32__) ++ vma->vm_page_prot = __pgprot((pgprot_val(vma->vm_page_prot) ++ & ~_PAGE_CACHABLE) ++ | (_PAGE_BUFFER | _PAGE_DIRTY)); + #elif defined(__ia64__) + if (efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start)) + vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); +diff --git a/include/asm-alpha/pgtable.h b/include/asm-alpha/pgtable.h +index 49ac9be..616d206 100644 +--- a/include/asm-alpha/pgtable.h ++++ b/include/asm-alpha/pgtable.h +@@ -345,10 +345,6 @@ extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset) + #define io_remap_pfn_range(vma, start, pfn, size, prot) \ + remap_pfn_range(vma, start, pfn, size, prot) + +-#define MK_IOSPACE_PFN(space, pfn) (pfn) +-#define GET_IOSPACE(pfn) 0 +-#define GET_PFN(pfn) (pfn) +- + #define pte_ERROR(e) \ + printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e)) + #define pmd_ERROR(e) \ +diff --git a/include/asm-alpha/scatterlist.h b/include/asm-alpha/scatterlist.h +index 6afb8bd..9173654 100644 +--- a/include/asm-alpha/scatterlist.h ++++ b/include/asm-alpha/scatterlist.h +@@ -2,6 +2,7 @@ + #define _ALPHA_SCATTERLIST_H + + #include <asm/page.h> ++#include <asm/types.h> + + struct scatterlist { + struct page *page; +diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h +index d464ca5..7ef4eeb 100644 +--- a/include/asm-arm/arch-at91/cpu.h ++++ b/include/asm-arm/arch-at91/cpu.h +@@ -68,4 +68,10 @@ static inline unsigned long at91_arch_identify(void) + #define cpu_is_at91sam9263() (0) + #endif + ++/* ++ * Since this is ARM, we will never run on any AVR32 CPU. But these ++ * definitions may reduce clutter in common drivers. ++ */ ++#define cpu_is_at32ap7000() (0) ++ + #endif +diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h +index 7b1c9ac..0c8be19 100644 +--- a/include/asm-arm/pgtable-nommu.h ++++ b/include/asm-arm/pgtable-nommu.h +@@ -83,10 +83,6 @@ extern int is_in_rom(unsigned long); + #define io_remap_page_range remap_page_range + #define io_remap_pfn_range remap_pfn_range + +-#define MK_IOSPACE_PFN(space, pfn) (pfn) +-#define GET_IOSPACE(pfn) 0 +-#define GET_PFN(pfn) (pfn) +- + + /* + * All 32bit addresses are effectively valid for vmalloc... +diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h +index 7b2bafc..21dec9f 100644 +--- a/include/asm-arm/pgtable.h ++++ b/include/asm-arm/pgtable.h +@@ -395,10 +395,6 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; + #define io_remap_pfn_range(vma,from,pfn,size,prot) \ + remap_pfn_range(vma, from, pfn, size, prot) + +-#define MK_IOSPACE_PFN(space, pfn) (pfn) +-#define GET_IOSPACE(pfn) 0 +-#define GET_PFN(pfn) (pfn) +- + #define pgtable_cache_init() do { } while (0) + + #endif /* !__ASSEMBLY__ */ +diff --git a/include/asm-arm26/pgtable.h b/include/asm-arm26/pgtable.h +index 63a8881..2b20e9f 100644 +--- a/include/asm-arm26/pgtable.h ++++ b/include/asm-arm26/pgtable.h +@@ -297,10 +297,6 @@ static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot) + #define io_remap_pfn_range(vma,from,pfn,size,prot) \ + remap_pfn_range(vma, from, pfn, size, prot) + +-#define MK_IOSPACE_PFN(space, pfn) (pfn) +-#define GET_IOSPACE(pfn) 0 +-#define GET_PFN(pfn) (pfn) +- + #endif /* !__ASSEMBLY__ */ + + #endif /* _ASMARM_PGTABLE_H */ +diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h +index 1a7b07d..2293ab0 100644 +--- a/include/asm-avr32/arch-at32ap/board.h ++++ b/include/asm-avr32/arch-at32ap/board.h +@@ -6,6 +6,8 @@ + + #include <linux/types.h> + ++#define GPIO_PIN_NONE (-1) ++ + /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */ + void at32_add_system_devices(void); + +@@ -30,11 +32,46 @@ struct spi_board_info; + struct platform_device * + at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n); + +-struct lcdc_platform_data { +- unsigned long fbmem_start; +- unsigned long fbmem_size; ++struct platform_device *at32_add_device_twi(unsigned int id); ++ ++struct mci_platform_data { ++ int detect_pin; ++ int wp_pin; ++}; ++struct platform_device * ++at32_add_device_mci(unsigned int id, struct mci_platform_data *data); ++struct platform_device *at32_add_device_usba(unsigned int id); ++ ++struct atmel_lcdfb_info; ++struct platform_device * ++at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, ++ unsigned long fbmem_start, unsigned long fbmem_len); ++ ++struct platform_device *at32_add_device_ac97c(unsigned int id); ++struct platform_device *at32_add_device_abdac(unsigned int id); ++ ++struct cf_platform_data { ++ int detect_pin; ++ int reset_pin; ++ int vcc_pin; ++ u8 cs; + }; + struct platform_device * +-at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data); ++at32_add_device_cf(unsigned int id, unsigned int extint, ++ struct cf_platform_data *data); ++ ++/* depending on what's hooked up, not all SSC pins will be used */ ++#define ATMEL_SSC_TK 0x01 ++#define ATMEL_SSC_TF 0x02 ++#define ATMEL_SSC_TD 0x04 ++#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD) ++ ++#define ATMEL_SSC_RK 0x10 ++#define ATMEL_SSC_RF 0x20 ++#define ATMEL_SSC_RD 0x40 ++#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD) ++ ++struct platform_device * ++at32_add_device_ssc(unsigned int id, unsigned int flags); + + #endif /* __ASM_ARCH_BOARD_H */ +diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/include/asm-avr32/arch-at32ap/cpu.h +new file mode 100644 +index 0000000..2bdc5bd +--- /dev/null ++++ b/include/asm-avr32/arch-at32ap/cpu.h +@@ -0,0 +1,33 @@ ++/* ++ * AVR32 and (fake) AT91 CPU identification ++ * ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#ifndef __ASM_ARCH_CPU_H ++#define __ASM_ARCH_CPU_H ++ ++/* ++ * Only AT32AP7000 is defined for now. We can identify the specific ++ * chip at runtime, but I'm not sure if it's really worth it. ++ */ ++#ifdef CONFIG_CPU_AT32AP7000 ++# define cpu_is_at32ap7000() (1) ++#else ++# define cpu_is_at32ap7000() (0) ++#endif ++ ++/* ++ * Since this is AVR32, we will never run on any AT91 CPU. But these ++ * definitions may reduce clutter in common drivers. ++ */ ++#define cpu_is_at91rm9200() (0) ++#define cpu_is_at91sam9xe() (0) ++#define cpu_is_at91sam9260() (0) ++#define cpu_is_at91sam9261() (0) ++#define cpu_is_at91sam9263() (0) ++ ++#endif /* __ASM_ARCH_CPU_H */ +diff --git a/include/asm-avr32/arch-at32ap/gpio.h b/include/asm-avr32/arch-at32ap/gpio.h +index 80a21aa..af7f953 100644 +--- a/include/asm-avr32/arch-at32ap/gpio.h ++++ b/include/asm-avr32/arch-at32ap/gpio.h +@@ -14,6 +14,8 @@ int gpio_direction_output(unsigned int gpio, int value); + int gpio_get_value(unsigned int gpio); + void gpio_set_value(unsigned int gpio, int value); + ++#include <asm-generic/gpio.h> /* cansleep wrappers */ ++ + static inline int gpio_to_irq(unsigned int gpio) + { + return gpio + GPIO_IRQ_BASE; +diff --git a/include/asm-avr32/arch-at32ap/io.h b/include/asm-avr32/arch-at32ap/io.h +new file mode 100644 +index 0000000..ee59e40 +--- /dev/null ++++ b/include/asm-avr32/arch-at32ap/io.h +@@ -0,0 +1,39 @@ ++#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H ++#define __ASM_AVR32_ARCH_AT32AP_IO_H ++ ++/* For "bizarre" halfword swapping */ ++#include <linux/byteorder/swabb.h> ++ ++#if defined(CONFIG_AP7000_32_BIT_SMC) ++# define __swizzle_addr_b(addr) (addr ^ 3UL) ++# define __swizzle_addr_w(addr) (addr ^ 2UL) ++# define __swizzle_addr_l(addr) (addr) ++# define ioswabb(a, x) (x) ++# define ioswabw(a, x) (x) ++# define ioswabl(a, x) (x) ++# define __mem_ioswabb(a, x) (x) ++# define __mem_ioswabw(a, x) swab16(x) ++# define __mem_ioswabl(a, x) swab32(x) ++#elif defined(CONFIG_AP7000_16_BIT_SMC) ++# define __swizzle_addr_b(addr) (addr ^ 1UL) ++# define __swizzle_addr_w(addr) (addr) ++# define __swizzle_addr_l(addr) (addr) ++# define ioswabb(a, x) (x) ++# define ioswabw(a, x) (x) ++# define ioswabl(a, x) swahw32(x) ++# define __mem_ioswabb(a, x) (x) ++# define __mem_ioswabw(a, x) swab16(x) ++# define __mem_ioswabl(a, x) swahb32(x) ++#else ++# define __swizzle_addr_b(addr) (addr) ++# define __swizzle_addr_w(addr) (addr) ++# define __swizzle_addr_l(addr) (addr) ++# define ioswabb(a, x) (x) ++# define ioswabw(a, x) swab16(x) ++# define ioswabl(a, x) swab32(x) ++# define __mem_ioswabb(a, x) (x) ++# define __mem_ioswabw(a, x) (x) ++# define __mem_ioswabl(a, x) (x) ++#endif ++ ++#endif /* __ASM_AVR32_ARCH_AT32AP_IO_H */ +diff --git a/include/asm-avr32/arch-at32ap/smc.h b/include/asm-avr32/arch-at32ap/smc.h +index 3732b32..07152b7 100644 +--- a/include/asm-avr32/arch-at32ap/smc.h ++++ b/include/asm-avr32/arch-at32ap/smc.h +@@ -48,10 +48,32 @@ struct smc_config { + unsigned int nwe_controlled:1; + + /* ++ * 0: NWAIT is disabled ++ * 1: Reserved ++ * 2: NWAIT is frozen mode ++ * 3: NWAIT in ready mode ++ */ ++ unsigned int nwait_mode:2; ++ ++ /* + * 0: Byte select access type + * 1: Byte write access type + */ + unsigned int byte_write:1; ++ ++ /* ++ * Number of clock cycles before data is released after ++ * the rising edge of the read controlling signal ++ * ++ * Total cycles from SMC is tdf_cycles + 1 ++ */ ++ unsigned int tdf_cycles:4; ++ ++ /* ++ * 0: TDF optimization disabled ++ * 1: TDF optimization enabled ++ */ ++ unsigned int tdf_mode:1; + }; + + extern int smc_set_configuration(int cs, const struct smc_config *config); +diff --git a/include/asm-avr32/arch-at32ap/time.h b/include/asm-avr32/arch-at32ap/time.h +new file mode 100644 +index 0000000..cc8a434 +--- /dev/null ++++ b/include/asm-avr32/arch-at32ap/time.h +@@ -0,0 +1,112 @@ ++/* ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef _ASM_AVR32_ARCH_AT32AP_TIME_H ++#define _ASM_AVR32_ARCH_AT32AP_TIME_H ++ ++#include <linux/platform_device.h> ++ ++extern struct irqaction timer_irqaction; ++extern struct platform_device at32_systc0_device; ++extern void local_timer_interrupt(int irq, void *dev_id); ++ ++#define TIMER_BCR 0x000000c0 ++#define TIMER_BCR_SYNC 0 ++#define TIMER_BMR 0x000000c4 ++#define TIMER_BMR_TC0XC0S 0 ++#define TIMER_BMR_TC1XC1S 2 ++#define TIMER_BMR_TC2XC2S 4 ++#define TIMER_CCR 0x00000000 ++#define TIMER_CCR_CLKDIS 1 ++#define TIMER_CCR_CLKEN 0 ++#define TIMER_CCR_SWTRG 2 ++#define TIMER_CMR 0x00000004 ++#define TIMER_CMR_ABETRG 10 ++#define TIMER_CMR_ACPA 16 ++#define TIMER_CMR_ACPC 18 ++#define TIMER_CMR_AEEVT 20 ++#define TIMER_CMR_ASWTRG 22 ++#define TIMER_CMR_BCPB 24 ++#define TIMER_CMR_BCPC 26 ++#define TIMER_CMR_BEEVT 28 ++#define TIMER_CMR_BSWTRG 30 ++#define TIMER_CMR_BURST 4 ++#define TIMER_CMR_CLKI 3 ++#define TIMER_CMR_CPCDIS 7 ++#define TIMER_CMR_CPCSTOP 6 ++#define TIMER_CMR_CPCTRG 14 ++#define TIMER_CMR_EEVT 10 ++#define TIMER_CMR_EEVTEDG 8 ++#define TIMER_CMR_ENETRG 12 ++#define TIMER_CMR_ETRGEDG 8 ++#define TIMER_CMR_LDBDIS 7 ++#define TIMER_CMR_LDBSTOP 6 ++#define TIMER_CMR_LDRA 16 ++#define TIMER_CMR_LDRB 18 ++#define TIMER_CMR_TCCLKS 0 ++#define TIMER_CMR_WAVE 15 ++#define TIMER_CMR_WAVSEL 13 ++#define TIMER_CV 0x00000010 ++#define TIMER_CV_CV 0 ++#define TIMER_IDR 0x00000028 ++#define TIMER_IDR_COVFS 0 ++#define TIMER_IDR_CPAS 2 ++#define TIMER_IDR_CPBS 3 ++#define TIMER_IDR_CPCS 4 ++#define TIMER_IDR_ETRGS 7 ++#define TIMER_IDR_LDRAS 5 ++#define TIMER_IDR_LDRBS 6 ++#define TIMER_IDR_LOVRS 1 ++#define TIMER_IER 0x00000024 ++#define TIMER_IER_COVFS 0 ++#define TIMER_IER_CPAS 2 ++#define TIMER_IER_CPBS 3 ++#define TIMER_IER_CPCS 4 ++#define TIMER_IER_ETRGS 7 ++#define TIMER_IER_LDRAS 5 ++#define TIMER_IER_LDRBS 6 ++#define TIMER_IER_LOVRS 1 ++#define TIMER_IMR 0x0000002c ++#define TIMER_IMR_COVFS 0 ++#define TIMER_IMR_CPAS 2 ++#define TIMER_IMR_CPBS 3 ++#define TIMER_IMR_CPCS 4 ++#define TIMER_IMR_ETRGS 7 ++#define TIMER_IMR_LDRAS 5 ++#define TIMER_IMR_LDRBS 6 ++#define TIMER_IMR_LOVRS 1 ++#define TIMER_RA 0x00000014 ++#define TIMER_RA_RA 0 ++#define TIMER_RB 0x00000018 ++#define TIMER_RB_RB 0 ++#define TIMER_RC 0x0000001c ++#define TIMER_RC_RC 0 ++#define TIMER_SR 0x00000020 ++#define TIMER_SR_CLKSTA 16 ++#define TIMER_SR_COVFS 0 ++#define TIMER_SR_CPAS 2 ++#define TIMER_SR_CPBS 3 ++#define TIMER_SR_CPCS 4 ++#define TIMER_SR_ETRGS 7 ++#define TIMER_SR_LDRAS 5 ++#define TIMER_SR_LDRBS 6 ++#define TIMER_SR_LOVRS 1 ++#define TIMER_SR_MTIOA 17 ++#define TIMER_SR_MTIOB 18 ++ ++/* Bit manipulation macros */ ++#define TIMER_BIT(name) (1 << TIMER_##name) ++#define TIMER_BF(name,value) ((value) << TIMER_##name) ++ ++/* Register access macros */ ++#define timer_read(port,instance,reg) \ ++ __raw_readl(port + (0x40 * instance) + TIMER_##reg) ++#define timer_write(port,instance,reg,value) \ ++ __raw_writel((value), port + (0x40 * instance) + TIMER_##reg) ++ ++#endif /* _ASM_AVR32_ARCH_AT32AP_TIME_H */ +diff --git a/include/asm-avr32/atomic.h b/include/asm-avr32/atomic.h +index c40b603..b9c2548 100644 +--- a/include/asm-avr32/atomic.h ++++ b/include/asm-avr32/atomic.h +@@ -173,7 +173,7 @@ static inline int atomic_sub_if_positive(int i, atomic_t *v) + } + + #define atomic_xchg(v, new) (xchg(&((v)->counter), new)) +-#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) ++#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) + + #define atomic_sub(i, v) (void)atomic_sub_return(i, v) + #define atomic_add(i, v) (void)atomic_add_return(i, v) +diff --git a/include/asm-avr32/bug.h b/include/asm-avr32/bug.h +index 521766b..afdcd79 100644 +--- a/include/asm-avr32/bug.h ++++ b/include/asm-avr32/bug.h +@@ -18,27 +18,53 @@ + + #ifdef CONFIG_DEBUG_BUGVERBOSE + +-#define BUG() \ +- do { \ +- asm volatile(".hword %0\n\t" \ +- ".hword %1\n\t" \ +- ".long %2" \ +- : \ +- : "n"(AVR32_BUG_OPCODE), \ +- "i"(__LINE__), "X"(__FILE__)); \ +- } while (0) ++#define _BUG_OR_WARN(flags) \ ++ asm volatile( \ ++ "1: .hword %0\n" \ ++ " .section __bug_table,\"a\",@progbits\n" \ ++ "2: .long 1b\n" \ ++ " .long %1\n" \ ++ " .short %2\n" \ ++ " .short %3\n" \ ++ " .org 2b + %4\n" \ ++ " .previous" \ ++ : \ ++ : "i"(AVR32_BUG_OPCODE), "i"(__FILE__), \ ++ "i"(__LINE__), "i"(flags), \ ++ "i"(sizeof(struct bug_entry))) + + #else + ++#define _BUG_OR_WARN(flags) \ ++ asm volatile( \ ++ "1: .hword %0\n" \ ++ " .section __bug_table,\"a\",@progbits\n" \ ++ "2: .long 1b\n" \ ++ " .short %1\n" \ ++ " .org 2b + %2\n" \ ++ " .previous" \ ++ : \ ++ : "i"(AVR32_BUG_OPCODE), "i"(flags), \ ++ "i"(sizeof(struct bug_entry))) ++ ++#endif /* CONFIG_DEBUG_BUGVERBOSE */ ++ + #define BUG() \ + do { \ +- asm volatile(".hword %0\n\t" \ +- : : "n"(AVR32_BUG_OPCODE)); \ ++ _BUG_OR_WARN(0); \ ++ for (;;); \ + } while (0) + +-#endif /* CONFIG_DEBUG_BUGVERBOSE */ ++#define WARN_ON(condition) \ ++ ({ \ ++ typeof(condition) __ret_warn_on = (condition); \ ++ if (unlikely(__ret_warn_on)) \ ++ _BUG_OR_WARN(BUGFLAG_WARNING); \ ++ unlikely(__ret_warn_on); \ ++ }) + + #define HAVE_ARCH_BUG ++#define HAVE_ARCH_WARN_ON + + #endif /* CONFIG_BUG */ + +diff --git a/include/asm-avr32/dma-controller.h b/include/asm-avr32/dma-controller.h +new file mode 100644 +index 0000000..56a4965 +--- /dev/null ++++ b/include/asm-avr32/dma-controller.h +@@ -0,0 +1,166 @@ ++/* ++ * Copyright (C) 2005-2006 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#ifndef __ASM_AVR32_DMA_CONTROLLER_H ++#define __ASM_AVR32_DMA_CONTROLLER_H ++ ++#include <linux/device.h> ++ ++#define DMA_DIR_MEM_TO_MEM 0x0000 ++#define DMA_DIR_MEM_TO_PERIPH 0x0001 ++#define DMA_DIR_PERIPH_TO_MEM 0x0002 ++#define DMA_DIR_PERIPH_TO_PERIPH 0x0003 ++ ++#define DMA_WIDTH_8BIT 0 ++#define DMA_WIDTH_16BIT 1 ++#define DMA_WIDTH_32BIT 2 ++ ++struct dma_request { ++ struct dma_controller *dmac; ++ struct list_head list; ++ ++ unsigned short channel; ++ ++ void (*xfer_complete)(struct dma_request *req); ++ void (*block_complete)(struct dma_request *req); ++ void (*error)(struct dma_request *req); ++}; ++ ++struct dma_request_sg { ++ struct dma_request req; ++ ++ int nr_sg; ++ struct scatterlist *sg; ++ unsigned long block_size; ++ unsigned int nr_blocks; ++ ++ dma_addr_t data_reg; ++ unsigned short periph_id; ++ ++ unsigned char direction; ++ unsigned char width; ++}; ++#define to_dma_request_sg(_req) \ ++ container_of(_req, struct dma_request_sg, req) ++ ++struct dma_request_cyclic { ++ struct dma_request req; ++ ++ int periods; ++ unsigned long buffer_size; ++ ++ dma_addr_t buffer_start; ++ dma_addr_t data_reg; ++ ++ unsigned short periph_id; ++ unsigned char direction; ++ unsigned char width; ++ ++ void *dev_id; ++}; ++#define to_dma_request_cyclic(_req) \ ++ container_of(_req, struct dma_request_cyclic, req) ++ ++struct dma_request_memcpy { ++ struct dma_request req; ++ ++ dma_addr_t src_addr; ++ unsigned int src_width; ++ unsigned int src_stride; ++ ++ dma_addr_t dst_addr; ++ unsigned int dst_width; ++ unsigned int dst_stride; ++ ++ size_t length; ++ ++ unsigned short src_reverse:1; ++ unsigned short dst_reverse:1; ++}; ++#define to_dma_request_memcpy(_req) \ ++ container_of(_req, struct dma_request_memcpy, req) ++ ++struct dma_controller { ++ struct list_head list; ++ int id; ++ struct device *dev; ++ ++ int (*alloc_channel)(struct dma_controller *dmac); ++ void (*release_channel)(struct dma_controller *dmac, ++ int channel); ++ int (*prepare_request_sg)(struct dma_controller *dmac, ++ struct dma_request_sg *req); ++ int (*prepare_request_cyclic)(struct dma_controller *dmac, ++ struct dma_request_cyclic *req); ++ int (*prepare_request_memcpy)(struct dma_controller *dmac, ++ struct dma_request_memcpy *req); ++ int (*start_request)(struct dma_controller *dmac, ++ unsigned int channel); ++ int (*stop_request)(struct dma_controller *dmac, ++ unsigned int channel); ++ dma_addr_t (*get_current_pos)(struct dma_controller *dmac, ++ unsigned int channel); ++}; ++ ++static inline int ++dma_alloc_channel(struct dma_controller *dmac) ++{ ++ return dmac->alloc_channel(dmac); ++} ++ ++static inline void ++dma_release_channel(struct dma_controller *dmac, int chan) ++{ ++ dmac->release_channel(dmac, chan); ++} ++ ++static inline int ++dma_prepare_request_sg(struct dma_controller *dmac, ++ struct dma_request_sg *req) ++{ ++ return dmac->prepare_request_sg(dmac, req); ++} ++ ++static inline int ++dma_prepare_request_cyclic(struct dma_controller *dmac, ++ struct dma_request_cyclic *req) ++{ ++ return dmac->prepare_request_cyclic(dmac, req); ++} ++ ++static inline int ++dma_prepare_request_memcpy(struct dma_controller *dmac, ++ struct dma_request_memcpy *req) ++{ ++ return dmac->prepare_request_memcpy(dmac, req); ++} ++ ++static inline int ++dma_start_request(struct dma_controller *dmac, ++ unsigned int channel) ++{ ++ return dmac->start_request(dmac, channel); ++} ++ ++static inline int ++dma_stop_request(struct dma_controller *dmac, ++ unsigned int channel) ++{ ++ return dmac->stop_request(dmac, channel); ++} ++ ++static inline dma_addr_t ++dma_get_current_pos(struct dma_controller *dmac, ++ unsigned int channel) ++{ ++ return dmac->get_current_pos(dmac, channel); ++} ++ ++extern int register_dma_controller(struct dma_controller *dmac); ++extern struct dma_controller *find_dma_controller(int id); ++ ++#endif /* __ASM_AVR32_DMA_CONTROLLER_H */ +diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h +index c08e810..e30d4b3 100644 +--- a/include/asm-avr32/io.h ++++ b/include/asm-avr32/io.h +@@ -1,13 +1,15 @@ + #ifndef __ASM_AVR32_IO_H + #define __ASM_AVR32_IO_H + ++#include <linux/kernel.h> + #include <linux/string.h> +- +-#ifdef __KERNEL__ ++#include <linux/types.h> + + #include <asm/addrspace.h> + #include <asm/byteorder.h> + ++#include <asm/arch/io.h> ++ + /* virt_to_phys will only work when address is in P1 or P2 */ + static __inline__ unsigned long virt_to_phys(volatile void *address) + { +@@ -36,104 +38,215 @@ extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen); + extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen); + extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); + +-static inline void writeb(unsigned char b, volatile void __iomem *addr) ++static inline void __raw_writeb(u8 v, volatile void __iomem *addr) + { +- *(volatile unsigned char __force *)addr = b; ++ *(volatile u8 __force *)addr = v; + } +-static inline void writew(unsigned short b, volatile void __iomem *addr) ++static inline void __raw_writew(u16 v, volatile void __iomem *addr) + { +- *(volatile unsigned short __force *)addr = b; ++ *(volatile u16 __force *)addr = v; + } +-static inline void writel(unsigned int b, volatile void __iomem *addr) ++static inline void __raw_writel(u32 v, volatile void __iomem *addr) + { +- *(volatile unsigned int __force *)addr = b; ++ *(volatile u32 __force *)addr = v; + } +-#define __raw_writeb writeb +-#define __raw_writew writew +-#define __raw_writel writel + +-static inline unsigned char readb(const volatile void __iomem *addr) ++static inline u8 __raw_readb(const volatile void __iomem *addr) + { +- return *(const volatile unsigned char __force *)addr; ++ return *(const volatile u8 __force *)addr; + } +-static inline unsigned short readw(const volatile void __iomem *addr) ++static inline u16 __raw_readw(const volatile void __iomem *addr) + { +- return *(const volatile unsigned short __force *)addr; ++ return *(const volatile u16 __force *)addr; + } +-static inline unsigned int readl(const volatile void __iomem *addr) ++static inline u32 __raw_readl(const volatile void __iomem *addr) + { +- return *(const volatile unsigned int __force *)addr; ++ return *(const volatile u32 __force *)addr; ++} ++ ++/* Convert I/O port address to virtual address */ ++#ifndef __io ++# define __io(p) ((void *)phys_to_uncached(p)) ++#endif ++ ++/* ++ * Not really sure about the best way to slow down I/O on ++ * AVR32. Defining it as a no-op until we have an actual test case. ++ */ ++#define SLOW_DOWN_IO do { } while (0) ++ ++#define __BUILD_MEMORY_SINGLE(pfx, bwl, type) \ ++static inline void \ ++pfx##write##bwl(type val, volatile void __iomem *addr) \ ++{ \ ++ volatile type *__addr; \ ++ type __val; \ ++ \ ++ __addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \ ++ __val = pfx##ioswab##bwl(__addr, val); \ ++ \ ++ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ ++ \ ++ *__addr = __val; \ ++} \ ++ \ ++static inline type pfx##read##bwl(const volatile void __iomem *addr) \ ++{ \ ++ volatile type *__addr; \ ++ type __val; \ ++ \ ++ __addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \ ++ \ ++ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ ++ \ ++ __val = *__addr; \ ++ return pfx##ioswab##bwl(__addr, __val); \ ++} ++ ++#define __BUILD_IOPORT_SINGLE(pfx, bwl, type, p, slow) \ ++static inline void pfx##out##bwl##p(type val, unsigned long port) \ ++{ \ ++ volatile type *__addr; \ ++ type __val; \ ++ \ ++ __addr = __io(__swizzle_addr_##bwl(port)); \ ++ __val = pfx##ioswab##bwl(__addr, val); \ ++ \ ++ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ ++ \ ++ *__addr = __val; \ ++ slow; \ ++} \ ++ \ ++static inline type pfx##in##bwl##p(unsigned long port) \ ++{ \ ++ volatile type *__addr; \ ++ type __val; \ ++ \ ++ __addr = __io(__swizzle_addr_##bwl(port)); \ ++ \ ++ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ ++ \ ++ __val = *__addr; \ ++ slow; \ ++ \ ++ return pfx##ioswab##bwl(__addr, __val); \ ++} ++ ++#define __BUILD_MEMORY_PFX(bus, bwl, type) \ ++ __BUILD_MEMORY_SINGLE(bus, bwl, type) ++ ++#define BUILDIO_MEM(bwl, type) \ ++ __BUILD_MEMORY_PFX(, bwl, type) \ ++ __BUILD_MEMORY_PFX(__mem_, bwl, type) ++ ++#define __BUILD_IOPORT_PFX(bus, bwl, type) \ ++ __BUILD_IOPORT_SINGLE(bus, bwl, type, ,) \ ++ __BUILD_IOPORT_SINGLE(bus, bwl, type, _p, SLOW_DOWN_IO) ++ ++#define BUILDIO_IOPORT(bwl, type) \ ++ __BUILD_IOPORT_PFX(, bwl, type) \ ++ __BUILD_IOPORT_PFX(__mem_, bwl, type) ++ ++BUILDIO_MEM(b, u8) ++BUILDIO_MEM(w, u16) ++BUILDIO_MEM(l, u32) ++ ++BUILDIO_IOPORT(b, u8) ++BUILDIO_IOPORT(w, u16) ++BUILDIO_IOPORT(l, u32) ++ ++#define readb_relaxed readb ++#define readw_relaxed readw ++#define readl_relaxed readl ++ ++#define __BUILD_MEMORY_STRING(bwl, type) \ ++static inline void writes##bwl(volatile void __iomem *addr, \ ++ const void *data, unsigned int count) \ ++{ \ ++ const type *__data = data; \ ++ \ ++ while (count--) \ ++ __mem_write##bwl(*__data++, addr); \ ++} \ ++ \ ++static inline void reads##bwl(const volatile void __iomem *addr, \ ++ void *data, unsigned int count) \ ++{ \ ++ type *__data = data; \ ++ \ ++ while (count--) \ ++ *__data++ = __mem_read##bwl(addr); \ + } +-#define __raw_readb readb +-#define __raw_readw readw +-#define __raw_readl readl + +-#define writesb(p, d, l) __raw_writesb((unsigned int)p, d, l) +-#define writesw(p, d, l) __raw_writesw((unsigned int)p, d, l) +-#define writesl(p, d, l) __raw_writesl((unsigned int)p, d, l) ++#define __BUILD_IOPORT_STRING(bwl, type) \ ++static inline void outs##bwl(unsigned long port, const void *data, \ ++ unsigned int count) \ ++{ \ ++ const type *__data = data; \ ++ \ ++ while (count--) \ ++ __mem_out##bwl(*__data++, port); \ ++} \ ++ \ ++static inline void ins##bwl(unsigned long port, void *data, \ ++ unsigned int count) \ ++{ \ ++ type *__data = data; \ ++ \ ++ while (count--) \ ++ *__data++ = __mem_in##bwl(port); \ ++} + +-#define readsb(p, d, l) __raw_readsb((unsigned int)p, d, l) +-#define readsw(p, d, l) __raw_readsw((unsigned int)p, d, l) +-#define readsl(p, d, l) __raw_readsl((unsigned int)p, d, l) ++#define BUILDSTRING(bwl, type) \ ++ __BUILD_MEMORY_STRING(bwl, type) \ ++ __BUILD_IOPORT_STRING(bwl, type) + ++BUILDSTRING(b, u8) ++BUILDSTRING(w, u16) ++BUILDSTRING(l, u32) + + /* + * io{read,write}{8,16,32} macros in both le (for PCI style consumers) and native be + */ + #ifndef ioread8 + +-#define ioread8(p) ({ unsigned int __v = __raw_readb(p); __v; }) ++#define ioread8(p) ((unsigned int)readb(p)) + +-#define ioread16(p) ({ unsigned int __v = le16_to_cpu(__raw_readw(p)); __v; }) +-#define ioread16be(p) ({ unsigned int __v = be16_to_cpu(__raw_readw(p)); __v; }) ++#define ioread16(p) ((unsigned int)readw(p)) ++#define ioread16be(p) ((unsigned int)__raw_readw(p)) + +-#define ioread32(p) ({ unsigned int __v = le32_to_cpu(__raw_readl(p)); __v; }) +-#define ioread32be(p) ({ unsigned int __v = be32_to_cpu(__raw_readl(p)); __v; }) ++#define ioread32(p) ((unsigned int)readl(p)) ++#define ioread32be(p) ((unsigned int)__raw_readl(p)) + +-#define iowrite8(v,p) __raw_writeb(v, p) ++#define iowrite8(v,p) writeb(v, p) + +-#define iowrite16(v,p) __raw_writew(cpu_to_le16(v), p) +-#define iowrite16be(v,p) __raw_writew(cpu_to_be16(v), p) ++#define iowrite16(v,p) writew(v, p) ++#define iowrite16be(v,p) __raw_writew(v, p) + +-#define iowrite32(v,p) __raw_writel(cpu_to_le32(v), p) +-#define iowrite32be(v,p) __raw_writel(cpu_to_be32(v), p) ++#define iowrite32(v,p) writel(v, p) ++#define iowrite32be(v,p) __raw_writel(v, p) + +-#define ioread8_rep(p,d,c) __raw_readsb(p,d,c) +-#define ioread16_rep(p,d,c) __raw_readsw(p,d,c) +-#define ioread32_rep(p,d,c) __raw_readsl(p,d,c) ++#define ioread8_rep(p,d,c) readsb(p,d,c) ++#define ioread16_rep(p,d,c) readsw(p,d,c) ++#define ioread32_rep(p,d,c) readsl(p,d,c) + +-#define iowrite8_rep(p,s,c) __raw_writesb(p,s,c) +-#define iowrite16_rep(p,s,c) __raw_writesw(p,s,c) +-#define iowrite32_rep(p,s,c) __raw_writesl(p,s,c) ++#define iowrite8_rep(p,s,c) writesb(p,s,c) ++#define iowrite16_rep(p,s,c) writesw(p,s,c) ++#define iowrite32_rep(p,s,c) writesl(p,s,c) + + #endif + +- +-/* +- * These two are only here because ALSA _thinks_ it needs them... +- */ + static inline void memcpy_fromio(void * to, const volatile void __iomem *from, + unsigned long count) + { +- char *p = to; +- while (count) { +- count--; +- *p = readb(from); +- p++; +- from++; +- } ++ memcpy(to, (const void __force *)from, count); + } + + static inline void memcpy_toio(volatile void __iomem *to, const void * from, + unsigned long count) + { +- const char *p = from; +- while (count) { +- count--; +- writeb(*p, to); +- p++; +- to++; +- } ++ memcpy((void __force *)to, from, count); + } + + static inline void memset_io(volatile void __iomem *addr, unsigned char val, +@@ -142,99 +255,8 @@ static inline void memset_io(volatile void __iomem *addr, unsigned char val, + memset((void __force *)addr, val, count); + } + +-/* +- * Bad read/write accesses... +- */ +-extern void __readwrite_bug(const char *fn); +- + #define IO_SPACE_LIMIT 0xffffffff + +-/* Convert I/O port address to virtual address */ +-#define __io(p) ((void __iomem *)phys_to_uncached(p)) +- +-/* +- * IO port access primitives +- * ------------------------- +- * +- * The AVR32 doesn't have special IO access instructions; all IO is memory +- * mapped. Note that these are defined to perform little endian accesses +- * only. Their primary purpose is to access PCI and ISA peripherals. +- * +- * Note that for a big endian machine, this implies that the following +- * big endian mode connectivity is in place. +- * +- * The machine specific io.h include defines __io to translate an "IO" +- * address to a memory address. +- * +- * Note that we prevent GCC re-ordering or caching values in expressions +- * by introducing sequence points into the in*() definitions. Note that +- * __raw_* do not guarantee this behaviour. +- * +- * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space. +- */ +-#define outb(v, p) __raw_writeb(v, __io(p)) +-#define outw(v, p) __raw_writew(cpu_to_le16(v), __io(p)) +-#define outl(v, p) __raw_writel(cpu_to_le32(v), __io(p)) +- +-#define inb(p) __raw_readb(__io(p)) +-#define inw(p) le16_to_cpu(__raw_readw(__io(p))) +-#define inl(p) le32_to_cpu(__raw_readl(__io(p))) +- +-static inline void __outsb(unsigned long port, void *addr, unsigned int count) +-{ +- while (count--) { +- outb(*(u8 *)addr, port); +- addr++; +- } +-} +- +-static inline void __insb(unsigned long port, void *addr, unsigned int count) +-{ +- while (count--) { +- *(u8 *)addr = inb(port); +- addr++; +- } +-} +- +-static inline void __outsw(unsigned long port, void *addr, unsigned int count) +-{ +- while (count--) { +- outw(*(u16 *)addr, port); +- addr += 2; +- } +-} +- +-static inline void __insw(unsigned long port, void *addr, unsigned int count) +-{ +- while (count--) { +- *(u16 *)addr = inw(port); +- addr += 2; +- } +-} +- +-static inline void __outsl(unsigned long port, void *addr, unsigned int count) +-{ +- while (count--) { +- outl(*(u32 *)addr, port); +- addr += 4; +- } +-} +- +-static inline void __insl(unsigned long port, void *addr, unsigned int count) +-{ +- while (count--) { +- *(u32 *)addr = inl(port); +- addr += 4; +- } +-} +- +-#define outsb(port, addr, count) __outsb(port, addr, count) +-#define insb(port, addr, count) __insb(port, addr, count) +-#define outsw(port, addr, count) __outsw(port, addr, count) +-#define insw(port, addr, count) __insw(port, addr, count) +-#define outsl(port, addr, count) __outsl(port, addr, count) +-#define insl(port, addr, count) __insl(port, addr, count) +- + extern void __iomem *__ioremap(unsigned long offset, size_t size, + unsigned long flags); + extern void __iounmap(void __iomem *addr); +@@ -292,6 +314,4 @@ extern void __iounmap(void __iomem *addr); + */ + #define xlate_dev_kmem_ptr(p) p + +-#endif /* __KERNEL__ */ +- + #endif /* __ASM_AVR32_IO_H */ +diff --git a/include/asm-avr32/kdebug.h b/include/asm-avr32/kdebug.h +index f583b64..a8c2f5e 100644 +--- a/include/asm-avr32/kdebug.h ++++ b/include/asm-avr32/kdebug.h +@@ -12,16 +12,12 @@ struct die_args { + + int register_die_notifier(struct notifier_block *nb); + int unregister_die_notifier(struct notifier_block *nb); +-int register_page_fault_notifier(struct notifier_block *nb); +-int unregister_page_fault_notifier(struct notifier_block *nb); + extern struct atomic_notifier_head avr32_die_chain; + + /* Grossly misnamed. */ + enum die_val { +- DIE_FAULT, + DIE_BREAKPOINT, + DIE_SSTEP, +- DIE_PAGE_FAULT, + }; + + static inline int notify_die(enum die_val val, struct pt_regs *regs, +@@ -35,4 +31,18 @@ static inline int notify_die(enum die_val val, struct pt_regs *regs, + return atomic_notifier_call_chain(&avr32_die_chain, val, &args); + } + ++/* ++ * These are only here because kprobes.c wants them to implement a ++ * blatant layering violation. Will hopefully go away soon once all ++ * architectures are updated. ++ */ ++static inline int register_page_fault_notifier(struct notifier_block *nb) ++{ ++ return 0; ++} ++static inline int unregister_page_fault_notifier(struct notifier_block *nb) ++{ ++ return 0; ++} ++ + #endif /* __ASM_AVR32_KDEBUG_H */ +diff --git a/include/asm-avr32/kprobes.h b/include/asm-avr32/kprobes.h +index 09a5cbe..190a637 100644 +--- a/include/asm-avr32/kprobes.h ++++ b/include/asm-avr32/kprobes.h +@@ -26,6 +26,7 @@ struct arch_specific_insn { + kprobe_opcode_t insn[MAX_INSN_SIZE]; + }; + ++extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr); + extern int kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data); + +diff --git a/include/asm-avr32/pgtable.h b/include/asm-avr32/pgtable.h +index 6b8ca9d..f6cc2b0 100644 +--- a/include/asm-avr32/pgtable.h ++++ b/include/asm-avr32/pgtable.h +@@ -394,10 +394,6 @@ typedef pte_t *pte_addr_t; + #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +-#define MK_IOSPACE_PFN(space, pfn) (pfn) +-#define GET_IOSPACE(pfn) 0 +-#define GET_PFN(pfn) (pfn) +- + /* No page table caches to initialize (?) */ + #define pgtable_cache_init() do { } while(0) + +diff --git a/include/asm-avr32/processor.h b/include/asm-avr32/processor.h +index f691377..6a64833 100644 +--- a/include/asm-avr32/processor.h ++++ b/include/asm-avr32/processor.h +@@ -40,6 +40,14 @@ enum tlb_config { + TLB_INVALID + }; + ++#define AVR32_FEATURE_RMW (1 << 0) ++#define AVR32_FEATURE_DSP (1 << 1) ++#define AVR32_FEATURE_SIMD (1 << 2) ++#define AVR32_FEATURE_OCD (1 << 3) ++#define AVR32_FEATURE_PCTR (1 << 4) ++#define AVR32_FEATURE_JAVA (1 << 5) ++#define AVR32_FEATURE_FPU (1 << 6) ++ + struct avr32_cpuinfo { + struct clk *clk; + unsigned long loops_per_jiffy; +@@ -48,6 +56,7 @@ struct avr32_cpuinfo { + unsigned short arch_revision; + unsigned short cpu_revision; + enum tlb_config tlb_config; ++ unsigned long features; + + struct cache_info icache; + struct cache_info dcache; +@@ -125,10 +134,10 @@ extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); + #define thread_saved_pc(tsk) ((tsk)->thread.cpu_context.pc) + + struct pt_regs; +-void show_trace(struct task_struct *task, unsigned long *stack, +- struct pt_regs *regs); +- + extern unsigned long get_wchan(struct task_struct *p); ++extern void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl); ++extern void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp, ++ struct pt_regs *regs, const char *log_lvl); + + #define KSTK_EIP(tsk) ((tsk)->thread.cpu_context.pc) + #define KSTK_ESP(tsk) ((tsk)->thread.cpu_context.ksp) +diff --git a/include/asm-avr32/scatterlist.h b/include/asm-avr32/scatterlist.h +index bfe7d75..c6d5ce3 100644 +--- a/include/asm-avr32/scatterlist.h ++++ b/include/asm-avr32/scatterlist.h +@@ -1,6 +1,8 @@ + #ifndef __ASM_AVR32_SCATTERLIST_H + #define __ASM_AVR32_SCATTERLIST_H + ++#include <asm/types.h> ++ + struct scatterlist { + struct page *page; + unsigned int offset; +diff --git a/include/asm-avr32/setup.h b/include/asm-avr32/setup.h +index 0a52242..b0828d4 100644 +--- a/include/asm-avr32/setup.h ++++ b/include/asm-avr32/setup.h +@@ -110,7 +110,7 @@ struct tagtable { + int (*parse)(struct tag *); + }; + +-#define __tag __attribute_used__ __attribute__((__section__(".taglist"))) ++#define __tag __attribute_used__ __attribute__((__section__(".taglist.init"))) + #define __tagtable(tag, fn) \ + static struct tagtable __tagtable_##fn __tag = { tag, fn } + +@@ -124,19 +124,12 @@ struct tagtable { + #define for_each_tag(t,base) \ + for (t = base; t->hdr.size; t = tag_next(t)) + +-extern struct tag_mem_range *mem_phys; +-extern struct tag_mem_range *mem_reserved; +-extern struct tag_mem_range *mem_ramdisk; +- + extern struct tag *bootloader_tags; + +-extern void setup_bootmem(void); +-extern void setup_processor(void); +-extern void board_setup_fbmem(unsigned long fbmem_start, +- unsigned long fbmem_size); ++extern resource_size_t fbmem_start; ++extern resource_size_t fbmem_size; + +-/* Chip-specific hook to enable the use of SDRAM */ +-void chip_enable_sdram(void); ++void setup_processor(void); + + #endif /* !__ASSEMBLY__ */ + +diff --git a/include/asm-avr32/sysreg.h b/include/asm-avr32/sysreg.h +index f91975f..c02bc83 100644 +--- a/include/asm-avr32/sysreg.h ++++ b/include/asm-avr32/sysreg.h +@@ -7,326 +7,281 @@ + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +-#ifndef __ASM_AVR32_SYSREG_H__ +-#define __ASM_AVR32_SYSREG_H__ ++#ifndef __ASM_AVR32_SYSREG_H ++#define __ASM_AVR32_SYSREG_H + + /* sysreg register offsets */ +-#define SYSREG_SR 0x0000 +-#define SYSREG_EVBA 0x0004 +-#define SYSREG_ACBA 0x0008 +-#define SYSREG_CPUCR 0x000c +-#define SYSREG_ECR 0x0010 +-#define SYSREG_RSR_SUP 0x0014 +-#define SYSREG_RSR_INT0 0x0018 +-#define SYSREG_RSR_INT1 0x001c +-#define SYSREG_RSR_INT2 0x0020 +-#define SYSREG_RSR_INT3 0x0024 +-#define SYSREG_RSR_EX 0x0028 +-#define SYSREG_RSR_NMI 0x002c +-#define SYSREG_RSR_DBG 0x0030 +-#define SYSREG_RAR_SUP 0x0034 +-#define SYSREG_RAR_INT0 0x0038 +-#define SYSREG_RAR_INT1 0x003c +-#define SYSREG_RAR_INT2 0x0040 +-#define SYSREG_RAR_INT3 0x0044 +-#define SYSREG_RAR_EX 0x0048 +-#define SYSREG_RAR_NMI 0x004c +-#define SYSREG_RAR_DBG 0x0050 +-#define SYSREG_JECR 0x0054 +-#define SYSREG_JOSP 0x0058 +-#define SYSREG_JAVA_LV0 0x005c +-#define SYSREG_JAVA_LV1 0x0060 +-#define SYSREG_JAVA_LV2 0x0064 +-#define SYSREG_JAVA_LV3 0x0068 +-#define SYSREG_JAVA_LV4 0x006c +-#define SYSREG_JAVA_LV5 0x0070 +-#define SYSREG_JAVA_LV6 0x0074 +-#define SYSREG_JAVA_LV7 0x0078 +-#define SYSREG_JTBA 0x007c +-#define SYSREG_JBCR 0x0080 +-#define SYSREG_CONFIG0 0x0100 +-#define SYSREG_CONFIG1 0x0104 +-#define SYSREG_COUNT 0x0108 +-#define SYSREG_COMPARE 0x010c +-#define SYSREG_TLBEHI 0x0110 +-#define SYSREG_TLBELO 0x0114 +-#define SYSREG_PTBR 0x0118 +-#define SYSREG_TLBEAR 0x011c +-#define SYSREG_MMUCR 0x0120 +-#define SYSREG_TLBARLO 0x0124 +-#define SYSREG_TLBARHI 0x0128 +-#define SYSREG_PCCNT 0x012c +-#define SYSREG_PCNT0 0x0130 +-#define SYSREG_PCNT1 0x0134 +-#define SYSREG_PCCR 0x0138 +-#define SYSREG_BEAR 0x013c ++#define SYSREG_SR 0x0000 ++#define SYSREG_EVBA 0x0004 ++#define SYSREG_ACBA 0x0008 ++#define SYSREG_CPUCR 0x000c ++#define SYSREG_ECR 0x0010 ++#define SYSREG_RSR_SUP 0x0014 ++#define SYSREG_RSR_INT0 0x0018 ++#define SYSREG_RSR_INT1 0x001c ++#define SYSREG_RSR_INT2 0x0020 ++#define SYSREG_RSR_INT3 0x0024 ++#define SYSREG_RSR_EX 0x0028 ++#define SYSREG_RSR_NMI 0x002c ++#define SYSREG_RSR_DBG 0x0030 ++#define SYSREG_RAR_SUP 0x0034 ++#define SYSREG_RAR_INT0 0x0038 ++#define SYSREG_RAR_INT1 0x003c ++#define SYSREG_RAR_INT2 0x0040 ++#define SYSREG_RAR_INT3 0x0044 ++#define SYSREG_RAR_EX 0x0048 ++#define SYSREG_RAR_NMI 0x004c ++#define SYSREG_RAR_DBG 0x0050 ++#define SYSREG_JECR 0x0054 ++#define SYSREG_JOSP 0x0058 ++#define SYSREG_JAVA_LV0 0x005c ++#define SYSREG_JAVA_LV1 0x0060 ++#define SYSREG_JAVA_LV2 0x0064 ++#define SYSREG_JAVA_LV3 0x0068 ++#define SYSREG_JAVA_LV4 0x006c ++#define SYSREG_JAVA_LV5 0x0070 ++#define SYSREG_JAVA_LV6 0x0074 ++#define SYSREG_JAVA_LV7 0x0078 ++#define SYSREG_JTBA 0x007c ++#define SYSREG_JBCR 0x0080 ++#define SYSREG_CONFIG0 0x0100 ++#define SYSREG_CONFIG1 0x0104 ++#define SYSREG_COUNT 0x0108 ++#define SYSREG_COMPARE 0x010c ++#define SYSREG_TLBEHI 0x0110 ++#define SYSREG_TLBELO 0x0114 ++#define SYSREG_PTBR 0x0118 ++#define SYSREG_TLBEAR 0x011c ++#define SYSREG_MMUCR 0x0120 ++#define SYSREG_TLBARLO 0x0124 ++#define SYSREG_TLBARHI 0x0128 ++#define SYSREG_PCCNT 0x012c ++#define SYSREG_PCNT0 0x0130 ++#define SYSREG_PCNT1 0x0134 ++#define SYSREG_PCCR 0x0138 ++#define SYSREG_BEAR 0x013c ++#define SYSREG_SABAL 0x0300 ++#define SYSREG_SABAH 0x0304 ++#define SYSREG_SABD 0x0308 + + /* Bitfields in SR */ +-#define SYSREG_SR_C_OFFSET 0 +-#define SYSREG_SR_C_SIZE 1 +-#define SYSREG_Z_OFFSET 1 +-#define SYSREG_Z_SIZE 1 +-#define SYSREG_SR_N_OFFSET 2 +-#define SYSREG_SR_N_SIZE 1 +-#define SYSREG_SR_V_OFFSET 3 +-#define SYSREG_SR_V_SIZE 1 +-#define SYSREG_Q_OFFSET 4 +-#define SYSREG_Q_SIZE 1 +-#define SYSREG_GM_OFFSET 16 +-#define SYSREG_GM_SIZE 1 +-#define SYSREG_I0M_OFFSET 17 +-#define SYSREG_I0M_SIZE 1 +-#define SYSREG_I1M_OFFSET 18 +-#define SYSREG_I1M_SIZE 1 +-#define SYSREG_I2M_OFFSET 19 +-#define SYSREG_I2M_SIZE 1 +-#define SYSREG_I3M_OFFSET 20 +-#define SYSREG_I3M_SIZE 1 +-#define SYSREG_EM_OFFSET 21 +-#define SYSREG_EM_SIZE 1 +-#define SYSREG_M0_OFFSET 22 +-#define SYSREG_M0_SIZE 1 +-#define SYSREG_M1_OFFSET 23 +-#define SYSREG_M1_SIZE 1 +-#define SYSREG_M2_OFFSET 24 +-#define SYSREG_M2_SIZE 1 +-#define SYSREG_SR_D_OFFSET 26 +-#define SYSREG_SR_D_SIZE 1 +-#define SYSREG_DM_OFFSET 27 +-#define SYSREG_DM_SIZE 1 +-#define SYSREG_SR_J_OFFSET 28 +-#define SYSREG_SR_J_SIZE 1 +-#define SYSREG_R_OFFSET 29 +-#define SYSREG_R_SIZE 1 +-#define SYSREG_H_OFFSET 30 +-#define SYSREG_H_SIZE 1 +- +-/* Bitfields in EVBA */ +- +-/* Bitfields in ACBA */ ++#define SYSREG_SR_C_OFFSET 0 ++#define SYSREG_SR_C_SIZE 1 ++#define SYSREG_Z_OFFSET 1 ++#define SYSREG_Z_SIZE 1 ++#define SYSREG_SR_N_OFFSET 2 ++#define SYSREG_SR_N_SIZE 1 ++#define SYSREG_SR_V_OFFSET 3 ++#define SYSREG_SR_V_SIZE 1 ++#define SYSREG_Q_OFFSET 4 ++#define SYSREG_Q_SIZE 1 ++#define SYSREG_L_OFFSET 5 ++#define SYSREG_L_SIZE 1 ++#define SYSREG_T_OFFSET 14 ++#define SYSREG_T_SIZE 1 ++#define SYSREG_SR_R_OFFSET 15 ++#define SYSREG_SR_R_SIZE 1 ++#define SYSREG_GM_OFFSET 16 ++#define SYSREG_GM_SIZE 1 ++#define SYSREG_I0M_OFFSET 17 ++#define SYSREG_I0M_SIZE 1 ++#define SYSREG_I1M_OFFSET 18 ++#define SYSREG_I1M_SIZE 1 ++#define SYSREG_I2M_OFFSET 19 ++#define SYSREG_I2M_SIZE 1 ++#define SYSREG_I3M_OFFSET 20 ++#define SYSREG_I3M_SIZE 1 ++#define SYSREG_EM_OFFSET 21 ++#define SYSREG_EM_SIZE 1 ++#define SYSREG_M0_OFFSET 22 ++#define SYSREG_M0_SIZE 1 ++#define SYSREG_M1_OFFSET 23 ++#define SYSREG_M1_SIZE 1 ++#define SYSREG_M2_OFFSET 24 ++#define SYSREG_M2_SIZE 1 ++#define SYSREG_SR_D_OFFSET 26 ++#define SYSREG_SR_D_SIZE 1 ++#define SYSREG_DM_OFFSET 27 ++#define SYSREG_DM_SIZE 1 ++#define SYSREG_SR_J_OFFSET 28 ++#define SYSREG_SR_J_SIZE 1 ++#define SYSREG_H_OFFSET 29 ++#define SYSREG_H_SIZE 1 + + /* Bitfields in CPUCR */ +-#define SYSREG_BI_OFFSET 0 +-#define SYSREG_BI_SIZE 1 +-#define SYSREG_BE_OFFSET 1 +-#define SYSREG_BE_SIZE 1 +-#define SYSREG_FE_OFFSET 2 +-#define SYSREG_FE_SIZE 1 +-#define SYSREG_RE_OFFSET 3 +-#define SYSREG_RE_SIZE 1 +-#define SYSREG_IBE_OFFSET 4 +-#define SYSREG_IBE_SIZE 1 +-#define SYSREG_IEE_OFFSET 5 +-#define SYSREG_IEE_SIZE 1 +- +-/* Bitfields in ECR */ +-#define SYSREG_ECR_OFFSET 0 +-#define SYSREG_ECR_SIZE 32 +- +-/* Bitfields in RSR_SUP */ +- +-/* Bitfields in RSR_INT0 */ +- +-/* Bitfields in RSR_INT1 */ +- +-/* Bitfields in RSR_INT2 */ +- +-/* Bitfields in RSR_INT3 */ +- +-/* Bitfields in RSR_EX */ +- +-/* Bitfields in RSR_NMI */ +- +-/* Bitfields in RSR_DBG */ +- +-/* Bitfields in RAR_SUP */ +- +-/* Bitfields in RAR_INT0 */ +- +-/* Bitfields in RAR_INT1 */ +- +-/* Bitfields in RAR_INT2 */ +- +-/* Bitfields in RAR_INT3 */ +- +-/* Bitfields in RAR_EX */ +- +-/* Bitfields in RAR_NMI */ +- +-/* Bitfields in RAR_DBG */ +- +-/* Bitfields in JECR */ +- +-/* Bitfields in JOSP */ +- +-/* Bitfields in JAVA_LV0 */ +- +-/* Bitfields in JAVA_LV1 */ +- +-/* Bitfields in JAVA_LV2 */ +- +-/* Bitfields in JAVA_LV3 */ +- +-/* Bitfields in JAVA_LV4 */ +- +-/* Bitfields in JAVA_LV5 */ +- +-/* Bitfields in JAVA_LV6 */ +- +-/* Bitfields in JAVA_LV7 */ +- +-/* Bitfields in JTBA */ +- +-/* Bitfields in JBCR */ ++#define SYSREG_BI_OFFSET 0 ++#define SYSREG_BI_SIZE 1 ++#define SYSREG_BE_OFFSET 1 ++#define SYSREG_BE_SIZE 1 ++#define SYSREG_FE_OFFSET 2 ++#define SYSREG_FE_SIZE 1 ++#define SYSREG_RE_OFFSET 3 ++#define SYSREG_RE_SIZE 1 ++#define SYSREG_IBE_OFFSET 4 ++#define SYSREG_IBE_SIZE 1 ++#define SYSREG_IEE_OFFSET 5 ++#define SYSREG_IEE_SIZE 1 + + /* Bitfields in CONFIG0 */ +-#define SYSREG_CONFIG0_D_OFFSET 1 +-#define SYSREG_CONFIG0_D_SIZE 1 +-#define SYSREG_CONFIG0_S_OFFSET 2 +-#define SYSREG_CONFIG0_S_SIZE 1 +-#define SYSREG_O_OFFSET 3 +-#define SYSREG_O_SIZE 1 +-#define SYSREG_P_OFFSET 4 +-#define SYSREG_P_SIZE 1 +-#define SYSREG_CONFIG0_J_OFFSET 5 +-#define SYSREG_CONFIG0_J_SIZE 1 +-#define SYSREG_F_OFFSET 6 +-#define SYSREG_F_SIZE 1 +-#define SYSREG_MMUT_OFFSET 7 +-#define SYSREG_MMUT_SIZE 3 +-#define SYSREG_AR_OFFSET 10 +-#define SYSREG_AR_SIZE 3 +-#define SYSREG_AT_OFFSET 13 +-#define SYSREG_AT_SIZE 3 +-#define SYSREG_PROCESSORREVISION_OFFSET 16 +-#define SYSREG_PROCESSORREVISION_SIZE 8 +-#define SYSREG_PROCESSORID_OFFSET 24 +-#define SYSREG_PROCESSORID_SIZE 8 ++#define SYSREG_CONFIG0_R_OFFSET 0 ++#define SYSREG_CONFIG0_R_SIZE 1 ++#define SYSREG_CONFIG0_D_OFFSET 1 ++#define SYSREG_CONFIG0_D_SIZE 1 ++#define SYSREG_CONFIG0_S_OFFSET 2 ++#define SYSREG_CONFIG0_S_SIZE 1 ++#define SYSREG_CONFIG0_O_OFFSET 3 ++#define SYSREG_CONFIG0_O_SIZE 1 ++#define SYSREG_CONFIG0_P_OFFSET 4 ++#define SYSREG_CONFIG0_P_SIZE 1 ++#define SYSREG_CONFIG0_J_OFFSET 5 ++#define SYSREG_CONFIG0_J_SIZE 1 ++#define SYSREG_CONFIG0_F_OFFSET 6 ++#define SYSREG_CONFIG0_F_SIZE 1 ++#define SYSREG_MMUT_OFFSET 7 ++#define SYSREG_MMUT_SIZE 3 ++#define SYSREG_AR_OFFSET 10 ++#define SYSREG_AR_SIZE 3 ++#define SYSREG_AT_OFFSET 13 ++#define SYSREG_AT_SIZE 3 ++#define SYSREG_PROCESSORREVISION_OFFSET 16 ++#define SYSREG_PROCESSORREVISION_SIZE 8 ++#define SYSREG_PROCESSORID_OFFSET 24 ++#define SYSREG_PROCESSORID_SIZE 8 + + /* Bitfields in CONFIG1 */ +-#define SYSREG_DASS_OFFSET 0 +-#define SYSREG_DASS_SIZE 3 +-#define SYSREG_DLSZ_OFFSET 3 +-#define SYSREG_DLSZ_SIZE 3 +-#define SYSREG_DSET_OFFSET 6 +-#define SYSREG_DSET_SIZE 4 +-#define SYSREG_IASS_OFFSET 10 +-#define SYSREG_IASS_SIZE 2 +-#define SYSREG_ILSZ_OFFSET 13 +-#define SYSREG_ILSZ_SIZE 3 +-#define SYSREG_ISET_OFFSET 16 +-#define SYSREG_ISET_SIZE 4 +-#define SYSREG_DMMUSZ_OFFSET 20 +-#define SYSREG_DMMUSZ_SIZE 6 +-#define SYSREG_IMMUSZ_OFFSET 26 +-#define SYSREG_IMMUSZ_SIZE 6 +- +-/* Bitfields in COUNT */ +- +-/* Bitfields in COMPARE */ ++#define SYSREG_DASS_OFFSET 0 ++#define SYSREG_DASS_SIZE 3 ++#define SYSREG_DLSZ_OFFSET 3 ++#define SYSREG_DLSZ_SIZE 3 ++#define SYSREG_DSET_OFFSET 6 ++#define SYSREG_DSET_SIZE 4 ++#define SYSREG_IASS_OFFSET 10 ++#define SYSREG_IASS_SIZE 3 ++#define SYSREG_ILSZ_OFFSET 13 ++#define SYSREG_ILSZ_SIZE 3 ++#define SYSREG_ISET_OFFSET 16 ++#define SYSREG_ISET_SIZE 4 ++#define SYSREG_DMMUSZ_OFFSET 20 ++#define SYSREG_DMMUSZ_SIZE 6 ++#define SYSREG_IMMUSZ_OFFSET 26 ++#define SYSREG_IMMUSZ_SIZE 6 + + /* Bitfields in TLBEHI */ +-#define SYSREG_ASID_OFFSET 0 +-#define SYSREG_ASID_SIZE 8 +-#define SYSREG_TLBEHI_I_OFFSET 8 +-#define SYSREG_TLBEHI_I_SIZE 1 +-#define SYSREG_TLBEHI_V_OFFSET 9 +-#define SYSREG_TLBEHI_V_SIZE 1 +-#define SYSREG_VPN_OFFSET 10 +-#define SYSREG_VPN_SIZE 22 ++#define SYSREG_ASID_OFFSET 0 ++#define SYSREG_ASID_SIZE 8 ++#define SYSREG_TLBEHI_I_OFFSET 8 ++#define SYSREG_TLBEHI_I_SIZE 1 ++#define SYSREG_TLBEHI_V_OFFSET 9 ++#define SYSREG_TLBEHI_V_SIZE 1 ++#define SYSREG_VPN_OFFSET 10 ++#define SYSREG_VPN_SIZE 22 + + /* Bitfields in TLBELO */ +-#define SYSREG_W_OFFSET 0 +-#define SYSREG_W_SIZE 1 +-#define SYSREG_TLBELO_D_OFFSET 1 +-#define SYSREG_TLBELO_D_SIZE 1 +-#define SYSREG_SZ_OFFSET 2 +-#define SYSREG_SZ_SIZE 2 +-#define SYSREG_AP_OFFSET 4 +-#define SYSREG_AP_SIZE 3 +-#define SYSREG_B_OFFSET 7 +-#define SYSREG_B_SIZE 1 +-#define SYSREG_G_OFFSET 8 +-#define SYSREG_G_SIZE 1 +-#define SYSREG_TLBELO_C_OFFSET 9 +-#define SYSREG_TLBELO_C_SIZE 1 +-#define SYSREG_PFN_OFFSET 10 +-#define SYSREG_PFN_SIZE 22 +- +-/* Bitfields in PTBR */ +- +-/* Bitfields in TLBEAR */ ++#define SYSREG_W_OFFSET 0 ++#define SYSREG_W_SIZE 1 ++#define SYSREG_TLBELO_D_OFFSET 1 ++#define SYSREG_TLBELO_D_SIZE 1 ++#define SYSREG_SZ_OFFSET 2 ++#define SYSREG_SZ_SIZE 2 ++#define SYSREG_AP_OFFSET 4 ++#define SYSREG_AP_SIZE 3 ++#define SYSREG_B_OFFSET 7 ++#define SYSREG_B_SIZE 1 ++#define SYSREG_G_OFFSET 8 ++#define SYSREG_G_SIZE 1 ++#define SYSREG_TLBELO_C_OFFSET 9 ++#define SYSREG_TLBELO_C_SIZE 1 ++#define SYSREG_PFN_OFFSET 10 ++#define SYSREG_PFN_SIZE 22 + + /* Bitfields in MMUCR */ +-#define SYSREG_E_OFFSET 0 +-#define SYSREG_E_SIZE 1 +-#define SYSREG_M_OFFSET 1 +-#define SYSREG_M_SIZE 1 +-#define SYSREG_MMUCR_I_OFFSET 2 +-#define SYSREG_MMUCR_I_SIZE 1 +-#define SYSREG_MMUCR_N_OFFSET 3 +-#define SYSREG_MMUCR_N_SIZE 1 +-#define SYSREG_MMUCR_S_OFFSET 4 +-#define SYSREG_MMUCR_S_SIZE 1 +-#define SYSREG_DLA_OFFSET 8 +-#define SYSREG_DLA_SIZE 6 +-#define SYSREG_DRP_OFFSET 14 +-#define SYSREG_DRP_SIZE 6 +-#define SYSREG_ILA_OFFSET 20 +-#define SYSREG_ILA_SIZE 6 +-#define SYSREG_IRP_OFFSET 26 +-#define SYSREG_IRP_SIZE 6 +- +-/* Bitfields in TLBARLO */ +- +-/* Bitfields in TLBARHI */ +- +-/* Bitfields in PCCNT */ +- +-/* Bitfields in PCNT0 */ +- +-/* Bitfields in PCNT1 */ ++#define SYSREG_E_OFFSET 0 ++#define SYSREG_E_SIZE 1 ++#define SYSREG_M_OFFSET 1 ++#define SYSREG_M_SIZE 1 ++#define SYSREG_MMUCR_I_OFFSET 2 ++#define SYSREG_MMUCR_I_SIZE 1 ++#define SYSREG_MMUCR_N_OFFSET 3 ++#define SYSREG_MMUCR_N_SIZE 1 ++#define SYSREG_MMUCR_S_OFFSET 4 ++#define SYSREG_MMUCR_S_SIZE 1 ++#define SYSREG_DLA_OFFSET 8 ++#define SYSREG_DLA_SIZE 6 ++#define SYSREG_DRP_OFFSET 14 ++#define SYSREG_DRP_SIZE 6 ++#define SYSREG_ILA_OFFSET 20 ++#define SYSREG_ILA_SIZE 6 ++#define SYSREG_IRP_OFFSET 26 ++#define SYSREG_IRP_SIZE 6 + + /* Bitfields in PCCR */ +- +-/* Bitfields in BEAR */ ++#define SYSREG_PCCR_R_OFFSET 1 ++#define SYSREG_PCCR_R_SIZE 1 ++#define SYSREG_PCCR_C_OFFSET 2 ++#define SYSREG_PCCR_C_SIZE 1 ++#define SYSREG_PCCR_S_OFFSET 3 ++#define SYSREG_PCCR_S_SIZE 1 ++#define SYSREG_IEC_OFFSET 4 ++#define SYSREG_IEC_SIZE 1 ++#define SYSREG_IE0_OFFSET 5 ++#define SYSREG_IE0_SIZE 1 ++#define SYSREG_IE1_OFFSET 6 ++#define SYSREG_IE1_SIZE 1 ++#define SYSREG_FC_OFFSET 8 ++#define SYSREG_FC_SIZE 1 ++#define SYSREG_F0_OFFSET 9 ++#define SYSREG_F0_SIZE 1 ++#define SYSREG_F1_OFFSET 10 ++#define SYSREG_F1_SIZE 1 ++#define SYSREG_CONF0_OFFSET 12 ++#define SYSREG_CONF0_SIZE 6 ++#define SYSREG_CONF1_OFFSET 18 ++#define SYSREG_CONF1_SIZE 6 + + /* Constants for ECR */ +-#define ECR_UNRECOVERABLE 0 +-#define ECR_TLB_MULTIPLE 1 +-#define ECR_BUS_ERROR_WRITE 2 +-#define ECR_BUS_ERROR_READ 3 +-#define ECR_NMI 4 +-#define ECR_ADDR_ALIGN_X 5 +-#define ECR_PROTECTION_X 6 +-#define ECR_DEBUG 7 +-#define ECR_ILLEGAL_OPCODE 8 +-#define ECR_UNIMPL_INSTRUCTION 9 +-#define ECR_PRIVILEGE_VIOLATION 10 +-#define ECR_FPE 11 +-#define ECR_COPROC_ABSENT 12 +-#define ECR_ADDR_ALIGN_R 13 +-#define ECR_ADDR_ALIGN_W 14 +-#define ECR_PROTECTION_R 15 +-#define ECR_PROTECTION_W 16 +-#define ECR_DTLB_MODIFIED 17 +-#define ECR_TLB_MISS_X 20 +-#define ECR_TLB_MISS_R 24 +-#define ECR_TLB_MISS_W 28 ++#define ECR_UNRECOVERABLE 0 ++#define ECR_TLB_MULTIPLE 1 ++#define ECR_BUS_ERROR_WRITE 2 ++#define ECR_BUS_ERROR_READ 3 ++#define ECR_NMI 4 ++#define ECR_ADDR_ALIGN_X 5 ++#define ECR_PROTECTION_X 6 ++#define ECR_DEBUG 7 ++#define ECR_ILLEGAL_OPCODE 8 ++#define ECR_UNIMPL_INSTRUCTION 9 ++#define ECR_PRIVILEGE_VIOLATION 10 ++#define ECR_FPE 11 ++#define ECR_COPROC_ABSENT 12 ++#define ECR_ADDR_ALIGN_R 13 ++#define ECR_ADDR_ALIGN_W 14 ++#define ECR_PROTECTION_R 15 ++#define ECR_PROTECTION_W 16 ++#define ECR_DTLB_MODIFIED 17 ++#define ECR_TLB_MISS_X 20 ++#define ECR_TLB_MISS_R 24 ++#define ECR_TLB_MISS_W 28 + + /* Bit manipulation macros */ +-#define SYSREG_BIT(name) (1 << SYSREG_##name##_OFFSET) +-#define SYSREG_BF(name,value) (((value) & ((1 << SYSREG_##name##_SIZE) - 1)) << SYSREG_##name##_OFFSET) +-#define SYSREG_BFEXT(name,value) (((value) >> SYSREG_##name##_OFFSET) & ((1 << SYSREG_##name##_SIZE) - 1)) +-#define SYSREG_BFINS(name,value,old) (((old) & ~(((1 << SYSREG_##name##_SIZE) - 1) << SYSREG_##name##_OFFSET)) | SYSREG_BF(name,value)) ++#define SYSREG_BIT(name) \ ++ (1 << SYSREG_##name##_OFFSET) ++#define SYSREG_BF(name,value) \ ++ (((value) & ((1 << SYSREG_##name##_SIZE) - 1)) \ ++ << SYSREG_##name##_OFFSET) ++#define SYSREG_BFEXT(name,value)\ ++ (((value) >> SYSREG_##name##_OFFSET) \ ++ & ((1 << SYSREG_##name##_SIZE) - 1)) ++#define SYSREG_BFINS(name,value,old) \ ++ (((old) & ~(((1 << SYSREG_##name##_SIZE) - 1) \ ++ << SYSREG_##name##_OFFSET)) \ ++ | SYSREG_BF(name,value)) + ++/* Register access macros */ + #ifdef __CHECKER__ + extern unsigned long __builtin_mfsr(unsigned long reg); + extern void __builtin_mtsr(unsigned long reg, unsigned long value); + #endif + +-/* Register access macros */ +-#define sysreg_read(reg) __builtin_mfsr(SYSREG_##reg) +-#define sysreg_write(reg, value) __builtin_mtsr(SYSREG_##reg, value) ++#define sysreg_read(reg) __builtin_mfsr(SYSREG_##reg) ++#define sysreg_write(reg, value) __builtin_mtsr(SYSREG_##reg, value) + +-#endif /* __ASM_AVR32_SYSREG_H__ */ ++#endif /* __ASM_AVR32_SYSREG_H */ +diff --git a/include/asm-avr32/system.h b/include/asm-avr32/system.h +index ac59605..a8236ba 100644 +--- a/include/asm-avr32/system.h ++++ b/include/asm-avr32/system.h +@@ -9,6 +9,7 @@ + #define __ASM_AVR32_SYSTEM_H + + #include <linux/compiler.h> ++#include <linux/linkage.h> + #include <linux/types.h> + + #include <asm/ptrace.h> +@@ -140,15 +141,9 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, + sizeof(*(ptr)))) + + struct pt_regs; +-extern void __die(const char *, struct pt_regs *, unsigned long, +- const char *, const char *, unsigned long); +-extern void __die_if_kernel(const char *, struct pt_regs *, unsigned long, +- const char *, const char *, unsigned long); +- +-#define die(msg, regs, err) \ +- __die(msg, regs, err, __FILE__ ":", __FUNCTION__, __LINE__) +-#define die_if_kernel(msg, regs, err) \ +- __die_if_kernel(msg, regs, err, __FILE__ ":", __FUNCTION__, __LINE__) ++void NORET_TYPE die(const char *str, struct pt_regs *regs, long err); ++void _exception(long signr, struct pt_regs *regs, int code, ++ unsigned long addr); + + #define arch_align_stack(x) (x) + +diff --git a/include/asm-avr32/thread_info.h b/include/asm-avr32/thread_info.h +index d1f5b35..a2e606d 100644 +--- a/include/asm-avr32/thread_info.h ++++ b/include/asm-avr32/thread_info.h +@@ -83,6 +83,7 @@ static inline struct thread_info *current_thread_info(void) + #define TIF_SINGLE_STEP 6 /* single step after next break */ + #define TIF_MEMDIE 7 + #define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal */ ++#define TIF_CPU_GOING_TO_SLEEP 9 /* CPU is entering sleep 0 mode */ + #define TIF_USERSPACE 31 /* true if FS sets userspace */ + + #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +@@ -94,6 +95,7 @@ static inline struct thread_info *current_thread_info(void) + #define _TIF_SINGLE_STEP (1 << TIF_SINGLE_STEP) + #define _TIF_MEMDIE (1 << TIF_MEMDIE) + #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) ++#define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP) + + /* XXX: These two masks must never span more than 16 bits! */ + /* work to do on interrupt/exception return */ +diff --git a/include/asm-avr32/uaccess.h b/include/asm-avr32/uaccess.h +index 74a679e..ed09239 100644 +--- a/include/asm-avr32/uaccess.h ++++ b/include/asm-avr32/uaccess.h +@@ -181,24 +181,23 @@ extern int __put_user_bad(void); + + #define __get_user_nocheck(x, ptr, size) \ + ({ \ +- typeof(*(ptr)) __gu_val = (typeof(*(ptr)) __force)0; \ ++ unsigned long __gu_val = 0; \ + int __gu_err = 0; \ + \ + switch (size) { \ + case 1: __get_user_asm("ub", __gu_val, ptr, __gu_err); break; \ + case 2: __get_user_asm("uh", __gu_val, ptr, __gu_err); break; \ + case 4: __get_user_asm("w", __gu_val, ptr, __gu_err); break; \ +- case 8: __get_user_asm("d", __gu_val, ptr, __gu_err); break; \ + default: __gu_err = __get_user_bad(); break; \ + } \ + \ +- x = __gu_val; \ ++ x = (typeof(*(ptr)))__gu_val; \ + __gu_err; \ + }) + + #define __get_user_check(x, ptr, size) \ + ({ \ +- typeof(*(ptr)) __gu_val = (typeof(*(ptr)) __force)0; \ ++ unsigned long __gu_val = 0; \ + const typeof(*(ptr)) __user * __gu_addr = (ptr); \ + int __gu_err = 0; \ + \ +@@ -216,10 +215,6 @@ extern int __put_user_bad(void); + __get_user_asm("w", __gu_val, __gu_addr, \ + __gu_err); \ + break; \ +- case 8: \ +- __get_user_asm("d", __gu_val, __gu_addr, \ +- __gu_err); \ +- break; \ + default: \ + __gu_err = __get_user_bad(); \ + break; \ +@@ -227,7 +222,7 @@ extern int __put_user_bad(void); + } else { \ + __gu_err = -EFAULT; \ + } \ +- x = __gu_val; \ ++ x = (typeof(*(ptr)))__gu_val; \ + __gu_err; \ + }) + +diff --git a/include/asm-avr32/unaligned.h b/include/asm-avr32/unaligned.h +index 3042723..7913617 100644 +--- a/include/asm-avr32/unaligned.h ++++ b/include/asm-avr32/unaligned.h +@@ -6,20 +6,31 @@ + * implementation. The AVR32 AP implementation can handle unaligned + * words, but halfwords must be halfword-aligned, and doublewords must + * be word-aligned. +- * +- * TODO: Make all this CPU-specific and optimize. + */ + +-#include <linux/string.h> ++#include <asm-generic/unaligned.h> + +-/* Use memmove here, so gcc does not insert a __builtin_memcpy. */ ++#ifdef CONFIG_CPU_AT32AP7000 + ++/* REVISIT calling memmove() may be smaller for 64-bit values ... */ ++ ++#undef get_unaligned + #define get_unaligned(ptr) \ +- ({ __typeof__(*(ptr)) __tmp; memmove(&__tmp, (ptr), sizeof(*(ptr))); __tmp; }) ++ ___get_unaligned(ptr, sizeof((*ptr))) ++#define ___get_unaligned(ptr, size) \ ++ ((size == 4) ? *(ptr) : __get_unaligned(ptr, size)) ++ ++#undef put_unaligned ++#define put_unaligned(val, ptr) \ ++ ___put_unaligned((__u64)(val), ptr, sizeof((*ptr))) ++#define ___put_unaligned(val, ptr, size) \ ++do { \ ++ if (size == 4) \ ++ *(ptr) = (val); \ ++ else \ ++ __put_unaligned(val, ptr, size); \ ++} while (0) + +-#define put_unaligned(val, ptr) \ +- ({ __typeof__(*(ptr)) __tmp = (val); \ +- memmove((ptr), &__tmp, sizeof(*(ptr))); \ +- (void)0; }) ++#endif + + #endif /* __ASM_AVR32_UNALIGNED_H */ +diff --git a/include/asm-frv/pgtable.h b/include/asm-frv/pgtable.h +index 8a05aa1..2687c77 100644 +--- a/include/asm-frv/pgtable.h ++++ b/include/asm-frv/pgtable.h +@@ -509,10 +509,6 @@ static inline int pte_file(pte_t pte) + #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +-#define MK_IOSPACE_PFN(space, pfn) (pfn) +-#define GET_IOSPACE(pfn) 0 +-#define GET_PFN(pfn) (pfn) +- + #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG + #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY + #define __HAVE_ARCH_PTEP_GET_AND_CLEAR +diff --git a/include/asm-frv/scatterlist.h b/include/asm-frv/scatterlist.h +index fb38fd3..8e827fa 100644 +--- a/include/asm-frv/scatterlist.h ++++ b/include/asm-frv/scatterlist.h +@@ -1,6 +1,8 @@ + #ifndef _ASM_SCATTERLIST_H + #define _ASM_SCATTERLIST_H + ++#include <asm/types.h> ++ + /* + * Drivers must set either ->address or (preferred) ->page and ->offset + * to indicate where data must be transferred to/from. +diff --git a/include/asm-h8300/pgtable.h b/include/asm-h8300/pgtable.h +index 8b7c685..170ea02 100644 +--- a/include/asm-h8300/pgtable.h ++++ b/include/asm-h8300/pgtable.h +@@ -55,10 +55,6 @@ extern int is_in_rom(unsigned long); + #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +-#define MK_IOSPACE_PFN(space, pfn) (pfn) +-#define GET_IOSPACE(pfn) 0 +-#define GET_PFN(pfn) (pfn) +- + /* + * All 32bit addresses are effectively valid for vmalloc... + * Sort of meaningless for non-VM targets. +diff --git a/include/asm-h8300/scatterlist.h b/include/asm-h8300/scatterlist.h +index 7627f0c..985fdf5 100644 +--- a/include/asm-h8300/scatterlist.h ++++ b/include/asm-h8300/scatterlist.h +@@ -1,6 +1,8 @@ + #ifndef _H8300_SCATTERLIST_H + #define _H8300_SCATTERLIST_H + ++#include <asm/types.h> ++ + struct scatterlist { + struct page *page; + unsigned int offset; +diff --git a/include/asm-i386/pgtable.h b/include/asm-i386/pgtable.h +index c3b58d4..994cf30 100644 +--- a/include/asm-i386/pgtable.h ++++ b/include/asm-i386/pgtable.h +@@ -519,10 +519,6 @@ do { \ + #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +-#define MK_IOSPACE_PFN(space, pfn) (pfn) +-#define GET_IOSPACE(pfn) 0 +-#define GET_PFN(pfn) (pfn) +- + #include <asm-generic/pgtable.h> + + #endif /* _I386_PGTABLE_H */ +diff --git a/include/asm-i386/scatterlist.h b/include/asm-i386/scatterlist.h +index 55d6c95..d7e45a8 100644 +--- a/include/asm-i386/scatterlist.h ++++ b/include/asm-i386/scatterlist.h +@@ -1,6 +1,8 @@ + #ifndef _I386_SCATTERLIST_H + #define _I386_SCATTERLIST_H + ++#include <asm/types.h> ++ + struct scatterlist { + struct page *page; + unsigned int offset; +diff --git a/include/asm-ia64/pgtable.h b/include/asm-ia64/pgtable.h +index 5531827..670b706 100644 +--- a/include/asm-ia64/pgtable.h ++++ b/include/asm-ia64/pgtable.h +@@ -485,10 +485,6 @@ extern void paging_init (void); + #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +-#define MK_IOSPACE_PFN(space, pfn) (pfn) +-#define GET_IOSPACE(pfn) 0 +-#define GET_PFN(pfn) (pfn) +- + /* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. +diff --git a/include/asm-ia64/scatterlist.h b/include/asm-ia64/scatterlist.h +index 9dbea88..a452ea2 100644 +--- a/include/asm-ia64/scatterlist.h ++++ b/include/asm-ia64/scatterlist.h +@@ -6,6 +6,8 @@ + * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co + */ + ++#include <asm/types.h> ++ + struct scatterlist { + struct page *page; + unsigned int offset; +diff --git a/include/asm-m32r/pgtable.h b/include/asm-m32r/pgtable.h +index 1c15ba7..8b2a2f1 100644 +--- a/include/asm-m32r/pgtable.h ++++ b/include/asm-m32r/pgtable.h +@@ -381,10 +381,6 @@ static inline void pmd_set(pmd_t * pmdp, pte_t * ptep) + #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +-#define MK_IOSPACE_PFN(space, pfn) (pfn) +-#define GET_IOSPACE(pfn) 0 +-#define GET_PFN(pfn) (pfn) +- + #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG + #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY + #define __HAVE_ARCH_PTEP_GET_AND_CLEAR +diff --git a/include/asm-m32r/scatterlist.h b/include/asm-m32r/scatterlist.h +index c2de96c..352415f 100644 +--- a/include/asm-m32r/scatterlist.h ++++ b/include/asm-m32r/scatterlist.h +@@ -1,6 +1,8 @@ + #ifndef _ASM_M32R_SCATTERLIST_H + #define _ASM_M32R_SCATTERLIST_H + ++#include <asm/types.h> ++ + struct scatterlist { + char * address; /* Location data is to be transferred to, NULL for + * highmem page */ +diff --git a/include/asm-m68k/pgtable.h b/include/asm-m68k/pgtable.h +index f3aa053..555b87a 100644 +--- a/include/asm-m68k/pgtable.h ++++ b/include/asm-m68k/pgtable.h +@@ -143,10 +143,6 @@ static inline void update_mmu_cache(struct vm_area_struct *vma, + #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +-#define MK_IOSPACE_PFN(space, pfn) (pfn) +-#define GET_IOSPACE(pfn) 0 +-#define GET_PFN(pfn) (pfn) +- + /* MMU-specific headers */ + + #ifdef CONFIG_SUN3 +diff --git a/include/asm-m68knommu/pgtable.h b/include/asm-m68knommu/pgtable.h +index 549ad23..9dfbbc2 100644 +--- a/include/asm-m68knommu/pgtable.h ++++ b/include/asm-m68knommu/pgtable.h +@@ -59,10 +59,6 @@ extern int is_in_rom(unsigned long); + #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +-#define MK_IOSPACE_PFN(space, pfn) (pfn) +-#define GET_IOSPACE(pfn) 0 +-#define GET_PFN(pfn) (pfn) +- + /* + * All 32bit addresses are effectively valid for vmalloc... + * Sort of meaningless for non-VM targets. +diff --git a/include/asm-m68knommu/scatterlist.h b/include/asm-m68knommu/scatterlist.h +index 2085d6f..4da79d3 100644 +--- a/include/asm-m68knommu/scatterlist.h ++++ b/include/asm-m68knommu/scatterlist.h +@@ -2,6 +2,7 @@ + #define _M68KNOMMU_SCATTERLIST_H + + #include <linux/mm.h> ++#include <asm/types.h> + + struct scatterlist { + struct page *page; +diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h +index 0d3295f..27d77d9 100644 +--- a/include/asm-mips/pgtable.h ++++ b/include/asm-mips/pgtable.h +@@ -387,10 +387,6 @@ static inline int io_remap_pfn_range(struct vm_area_struct *vma, + remap_pfn_range(vma, vaddr, pfn, size, prot) + #endif + +-#define MK_IOSPACE_PFN(space, pfn) (pfn) +-#define GET_IOSPACE(pfn) 0 +-#define GET_PFN(pfn) (pfn) +- + #include <asm-generic/pgtable.h> + + /* +diff --git a/include/asm-mips/scatterlist.h b/include/asm-mips/scatterlist.h +index 2263470..7af104c 100644 +--- a/include/asm-mips/scatterlist.h ++++ b/include/asm-mips/scatterlist.h +@@ -1,6 +1,8 @@ + #ifndef __ASM_SCATTERLIST_H + #define __ASM_SCATTERLIST_H + ++#include <asm/types.h> ++ + struct scatterlist { + struct page * page; + unsigned int offset; +diff --git a/include/asm-parisc/pgtable.h b/include/asm-parisc/pgtable.h +index d7e1b10..beb2adb 100644 +--- a/include/asm-parisc/pgtable.h ++++ b/include/asm-parisc/pgtable.h +@@ -528,10 +528,6 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, + + #define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_NO_CACHE) + +-#define MK_IOSPACE_PFN(space, pfn) (pfn) +-#define GET_IOSPACE(pfn) 0 +-#define GET_PFN(pfn) (pfn) +- + /* We provide our own get_unmapped_area to provide cache coherency */ + + #define HAVE_ARCH_UNMAPPED_AREA +diff --git a/include/asm-parisc/scatterlist.h b/include/asm-parisc/scatterlist.h +index 236c1d0..e7211c7 100644 +--- a/include/asm-parisc/scatterlist.h ++++ b/include/asm-parisc/scatterlist.h +@@ -2,6 +2,7 @@ + #define _ASM_PARISC_SCATTERLIST_H + + #include <asm/page.h> ++#include <asm/types.h> + + struct scatterlist { + struct page *page; +diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h +index b1fdbf4..bed452d 100644 +--- a/include/asm-ppc/pgtable.h ++++ b/include/asm-ppc/pgtable.h +@@ -827,10 +827,6 @@ static inline int io_remap_pfn_range(struct vm_area_struct *vma, + remap_pfn_range(vma, vaddr, pfn, size, prot) + #endif + +-#define MK_IOSPACE_PFN(space, pfn) (pfn) +-#define GET_IOSPACE(pfn) 0 +-#define GET_PFN(pfn) (pfn) +- + /* + * No page table caches to initialise + */ +diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h +index 184d7fc..5b523c7 100644 +--- a/include/asm-sh/pgtable.h ++++ b/include/asm-sh/pgtable.h +@@ -568,10 +568,6 @@ typedef pte_t *pte_addr_t; + #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +-#define MK_IOSPACE_PFN(space, pfn) (pfn) +-#define GET_IOSPACE(pfn) 0 +-#define GET_PFN(pfn) (pfn) +- + struct mm_struct; + + /* +diff --git a/include/asm-sh/scatterlist.h b/include/asm-sh/scatterlist.h +index d19e7cd..b9ae53c 100644 +--- a/include/asm-sh/scatterlist.h ++++ b/include/asm-sh/scatterlist.h +@@ -1,6 +1,8 @@ + #ifndef __ASM_SH_SCATTERLIST_H + #define __ASM_SH_SCATTERLIST_H + ++#include <asm/types.h> ++ + struct scatterlist { + struct page * page; /* Location for highmem page, if any */ + unsigned int offset;/* for highmem, page offset */ +diff --git a/include/asm-sh64/pgtable.h b/include/asm-sh64/pgtable.h +index 6b97c4c..b875482 100644 +--- a/include/asm-sh64/pgtable.h ++++ b/include/asm-sh64/pgtable.h +@@ -485,10 +485,6 @@ extern void update_mmu_cache(struct vm_area_struct * vma, + #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +-#define MK_IOSPACE_PFN(space, pfn) (pfn) +-#define GET_IOSPACE(pfn) 0 +-#define GET_PFN(pfn) (pfn) +- + #endif /* !__ASSEMBLY__ */ + + /* +diff --git a/include/asm-sh64/scatterlist.h b/include/asm-sh64/scatterlist.h +index 5d8fa32..1c723f2 100644 +--- a/include/asm-sh64/scatterlist.h ++++ b/include/asm-sh64/scatterlist.h +@@ -11,6 +11,8 @@ + #ifndef __ASM_SH64_SCATTERLIST_H + #define __ASM_SH64_SCATTERLIST_H + ++#include <asm/types.h> ++ + struct scatterlist { + struct page * page; /* Location for highmem page, if any */ + unsigned int offset;/* for highmem, page offset */ +diff --git a/include/asm-sparc64/scatterlist.h b/include/asm-sparc64/scatterlist.h +index ec4f3c6..048fdb4 100644 +--- a/include/asm-sparc64/scatterlist.h ++++ b/include/asm-sparc64/scatterlist.h +@@ -3,6 +3,7 @@ + #define _SPARC64_SCATTERLIST_H + + #include <asm/page.h> ++#include <asm/types.h> + + struct scatterlist { + struct page *page; +diff --git a/include/asm-v850/scatterlist.h b/include/asm-v850/scatterlist.h +index af1cba6..56f4029 100644 +--- a/include/asm-v850/scatterlist.h ++++ b/include/asm-v850/scatterlist.h +@@ -14,6 +14,8 @@ + #ifndef __V850_SCATTERLIST_H__ + #define __V850_SCATTERLIST_H__ + ++#include <asm/types.h> ++ + struct scatterlist { + struct page *page; + unsigned offset; +diff --git a/include/asm-x86_64/pgtable.h b/include/asm-x86_64/pgtable.h +index 730bd60..1eb1043 100644 +--- a/include/asm-x86_64/pgtable.h ++++ b/include/asm-x86_64/pgtable.h +@@ -413,10 +413,6 @@ extern int kern_addr_valid(unsigned long addr); + #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +-#define MK_IOSPACE_PFN(space, pfn) (pfn) +-#define GET_IOSPACE(pfn) 0 +-#define GET_PFN(pfn) (pfn) +- + #define HAVE_ARCH_UNMAPPED_AREA + + #define pgtable_cache_init() do { } while (0) +diff --git a/include/asm-x86_64/scatterlist.h b/include/asm-x86_64/scatterlist.h +index 49d89f8..eaf7ada 100644 +--- a/include/asm-x86_64/scatterlist.h ++++ b/include/asm-x86_64/scatterlist.h +@@ -1,6 +1,8 @@ + #ifndef _X8664_SCATTERLIST_H + #define _X8664_SCATTERLIST_H + ++#include <asm/types.h> ++ + struct scatterlist { + struct page *page; + unsigned int offset; +diff --git a/include/asm-xtensa/scatterlist.h b/include/asm-xtensa/scatterlist.h +index 38a2b9a..ca337a2 100644 +--- a/include/asm-xtensa/scatterlist.h ++++ b/include/asm-xtensa/scatterlist.h +@@ -11,6 +11,8 @@ + #ifndef _XTENSA_SCATTERLIST_H + #define _XTENSA_SCATTERLIST_H + ++#include <asm/types.h> ++ + struct scatterlist { + struct page *page; + unsigned int offset; +diff --git a/include/linux/fb.h b/include/linux/fb.h +index be913ec..deb2365 100644 +--- a/include/linux/fb.h ++++ b/include/linux/fb.h +@@ -833,7 +833,7 @@ struct fb_info { + #define fb_writeq sbus_writeq + #define fb_memset sbus_memset_io + +-#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__) ++#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__) || defined(__avr32__) + + #define fb_readb __raw_readb + #define fb_readw __raw_readw +diff --git a/include/linux/gpio_mouse.h b/include/linux/gpio_mouse.h +new file mode 100644 +index 0000000..7796683 +--- /dev/null ++++ b/include/linux/gpio_mouse.h +@@ -0,0 +1,47 @@ ++/* ++ * Driver for simulating a mouse on GPIO lines. ++ * ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef _GPIO_MOUSE_H ++#define _GPIO_MOUSE_H ++ ++#define GPIO_MOUSE_POLARITY_ACT_HIGH 0x00 ++#define GPIO_MOUSE_POLARITY_ACT_LOW 0x01 ++ ++/** ++ * struct gpio_mouse_platform_data ++ * @scan_ms: integer in ms specifying the scan periode. ++ * @polarity: Pin polarity, active high or low. ++ * @up: GPIO line for up value. ++ * @down: GPIO line for down value. ++ * @left: GPIO line for left value. ++ * @right: GPIO line for right value. ++ * @bleft: GPIO line for left button. ++ * @bright: GPIO line for right button. ++ * @bmiddle: GPIO line for middle button. ++ * ++ * This struct must be added to the platform_device in the board code. It is ++ * used by the gpio_mouse driver to setup GPIO lines, calculate mouse movement ++ * and have a reference to the timer used for scanning. ++ */ ++struct gpio_mouse_platform_data { ++ int scan_ms; ++ int polarity; ++ ++ int up; ++ int down; ++ int left; ++ int right; ++ ++ int bleft; ++ int bmiddle; ++ int bright; ++}; ++ ++#endif /* _GPIO_MOUSE_H */ +diff --git a/include/linux/i2c-gpio.h b/include/linux/i2c-gpio.h +new file mode 100644 +index 0000000..c1bcb1f +--- /dev/null ++++ b/include/linux/i2c-gpio.h +@@ -0,0 +1,38 @@ ++/* ++ * i2c-gpio interface to platform code ++ * ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#ifndef _LINUX_I2C_GPIO_H ++#define _LINUX_I2C_GPIO_H ++ ++/** ++ * struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio ++ * @sda_pin: GPIO pin ID to use for SDA ++ * @scl_pin: GPIO pin ID to use for SCL ++ * @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz ++ * @timeout: clock stretching timeout in jiffies. If the slave keeps ++ * SCL low for longer than this, the transfer will time out. ++ * @sda_is_open_drain: SDA is configured as open drain, i.e. the pin ++ * isn't actively driven high when setting the output value high. ++ * gpio_get_value() must return the actual pin state even if the ++ * pin is configured as an output. ++ * @scl_is_open_drain: SCL is set up as open drain. Same requirements ++ * as for sda_is_open_drain apply. ++ * @scl_is_output_only: SCL output drivers cannot be turned off. ++ */ ++struct i2c_gpio_platform_data { ++ unsigned int sda_pin; ++ unsigned int scl_pin; ++ int udelay; ++ int timeout; ++ unsigned int sda_is_open_drain:1; ++ unsigned int scl_is_open_drain:1; ++ unsigned int scl_is_output_only:1; ++}; ++ ++#endif /* _LINUX_I2C_GPIO_H */ +diff --git a/include/linux/spi/at73c213.h b/include/linux/spi/at73c213.h +new file mode 100644 +index 0000000..44ebe7d +--- /dev/null ++++ b/include/linux/spi/at73c213.h +@@ -0,0 +1,26 @@ ++/* ++ * Board-specific data used to set up AT73c213 audio DAC driver. ++ */ ++ ++struct at73c213_board_info { ++ ++ /* This identifies a clock suitable for clk_get(NULL, dac_clk). ++ * One might expect something like clk_get(&spidev->dev, "dac") to ++ * work, but current clock framework implementations don't support ++ * association of such clocks with non-core (e.g. SPI) devices. ++ */ ++ char dac_clk[8]; ++ ++ /* SPI is used only for the control interface. Data is streamed ++ * using "I2S" formats through a different interface, with its own ++ * driver and associated resources (registers, irq, clock). ++ */ ++ int i2s_dev; ++ ++ /* this name is seen by userspace tools */ ++ char shortname[32]; ++ ++ /* REVISIT should target bitrate be provided here? ++ * It can not be provided here, as it has to be calculated when probed ++ */ ++}; +diff --git a/include/linux/ssc.h b/include/linux/ssc.h +new file mode 100644 +index 0000000..9705e4a +--- /dev/null ++++ b/include/linux/ssc.h +@@ -0,0 +1,355 @@ ++#ifndef __INCLUDE_ATMEL_SSC_H ++#define __INCLUDE_ATMEL_SSC_H ++ ++#include <linux/platform_device.h> ++#include <asm/irq.h> ++ ++#define ATMEL_SSC_MODE_I2S_MASTER 0x00000001 ++#define ATMEL_SSC_MODE_I2S_SLAVE 0x00000002 ++#define ATMEL_SSC_MODE_SPI_MASTER 0x00000003 ++ ++#define ATMEL_SSC_SPI_MODE0 0 /* SPI: CPOL = 0, CPHA = 1 */ ++#define ATMEL_SSC_SPI_MODE1 1 /* SPI: CPOL = 0, CHPA = 0 */ ++#define ATMEL_SSC_SPI_MODE2 2 /* SPI: CPOL = 1, CPHA = 1 */ ++#define ATMEL_SSC_SPI_MODE3 3 /* SPI: CPOL = 1, CPHA = 0 */ ++ ++struct ssc_device { ++ void __iomem *regs; ++ struct platform_device *pdev; ++ struct clk *clk; ++ char name[6]; ++ int user; ++ int irq; ++}; ++ ++struct ssc_mode { ++ unsigned int mode; ++ unsigned int bauddiv; ++ unsigned int data_length; ++ unsigned int ssc_rxtx; ++ unsigned int spi_mode; ++ unsigned int spi_cs_pio_pin; ++}; ++ ++struct ssc_xfer_info { ++ unsigned long data; ++ unsigned long len; ++ unsigned long next_data; ++ unsigned long next_len; ++}; ++ ++struct ssc_device* __must_check ssc_request(unsigned int ssc_num); ++void ssc_free(struct ssc_device *ssc); ++ ++int ssc_set_mode(struct ssc_device *ssc, struct ssc_mode *mode); ++ ++int ssc_set_rx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer); ++int ssc_get_rx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer); ++int ssc_set_tx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer); ++int ssc_get_tx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer); ++ ++int ssc_enable(struct ssc_device *ssc, char tx, char rx); ++int ssc_enable_xfer(struct ssc_device *ssc, char tx, char rx); ++int ssc_disable(struct ssc_device *ssc, char tx, char rx); ++int ssc_disable_xfer(struct ssc_device *ssc, char tx, char rx); ++ ++int ssc_enable_int(struct ssc_device *ssc, unsigned int mask); ++int ssc_disable_int(struct ssc_device *ssc, unsigned int mask); ++int ssc_get_int_mask(struct ssc_device *ssc, unsigned int *mask); ++ ++int ssc_clk_get_rate(struct ssc_device *ssc); ++ ++int ssc_to_irq(struct ssc_device *ssc); ++struct ssc_device* irq_to_ssc(unsigned int irq); ++ ++void at32_init_ssc(struct platform_device *pdev); ++ ++/* SSC register offsets */ ++ ++/* SSC Control Register */ ++#define SSC_CR 0x00000000 ++#define SSC_CR_RXDIS_SIZE 1 ++#define SSC_CR_RXDIS_OFFSET 1 ++#define SSC_CR_RXEN_SIZE 1 ++#define SSC_CR_RXEN_OFFSET 0 ++#define SSC_CR_SWRST_SIZE 1 ++#define SSC_CR_SWRST_OFFSET 15 ++#define SSC_CR_TXDIS_SIZE 1 ++#define SSC_CR_TXDIS_OFFSET 9 ++#define SSC_CR_TXEN_SIZE 1 ++#define SSC_CR_TXEN_OFFSET 8 ++ ++/* SSC Clock Mode Register */ ++#define SSC_CMR 0x00000004 ++#define SSC_CMR_DIV_SIZE 12 ++#define SSC_CMR_DIV_OFFSET 0 ++ ++/* SSC Receive Clock Mode Register */ ++#define SSC_RCMR 0x00000010 ++#define SSC_RCMR_CKG_SIZE 2 ++#define SSC_RCMR_CKG_OFFSET 6 ++#define SSC_RCMR_CKI_SIZE 1 ++#define SSC_RCMR_CKI_OFFSET 5 ++#define SSC_RCMR_CKO_SIZE 3 ++#define SSC_RCMR_CKO_OFFSET 2 ++#define SSC_RCMR_CKS_SIZE 2 ++#define SSC_RCMR_CKS_OFFSET 0 ++#define SSC_RCMR_PERIOD_SIZE 8 ++#define SSC_RCMR_PERIOD_OFFSET 24 ++#define SSC_RCMR_START_SIZE 4 ++#define SSC_RCMR_START_OFFSET 8 ++#define SSC_RCMR_STOP_SIZE 1 ++#define SSC_RCMR_STOP_OFFSET 12 ++#define SSC_RCMR_STTDLY_SIZE 8 ++#define SSC_RCMR_STTDLY_OFFSET 16 ++ ++/* SSC Receive Frame Mode Register */ ++#define SSC_RFMR 0x00000014 ++#define SSC_RFMR_DATLEN_SIZE 5 ++#define SSC_RFMR_DATLEN_OFFSET 0 ++#define SSC_RFMR_DATNB_SIZE 4 ++#define SSC_RFMR_DATNB_OFFSET 8 ++#define SSC_RFMR_FSEDGE_SIZE 1 ++#define SSC_RFMR_FSEDGE_OFFSET 24 ++#define SSC_RFMR_FSLEN_SIZE 4 ++#define SSC_RFMR_FSLEN_OFFSET 16 ++#define SSC_RFMR_FSOS_SIZE 4 ++#define SSC_RFMR_FSOS_OFFSET 20 ++#define SSC_RFMR_LOOP_SIZE 1 ++#define SSC_RFMR_LOOP_OFFSET 5 ++#define SSC_RFMR_MSBF_SIZE 1 ++#define SSC_RFMR_MSBF_OFFSET 7 ++ ++/* SSC Transmit Clock Mode Register */ ++#define SSC_TCMR 0x00000018 ++#define SSC_TCMR_CKG_SIZE 2 ++#define SSC_TCMR_CKG_OFFSET 6 ++#define SSC_TCMR_CKI_SIZE 1 ++#define SSC_TCMR_CKI_OFFSET 5 ++#define SSC_TCMR_CKO_SIZE 3 ++#define SSC_TCMR_CKO_OFFSET 2 ++#define SSC_TCMR_CKS_SIZE 2 ++#define SSC_TCMR_CKS_OFFSET 0 ++#define SSC_TCMR_PERIOD_SIZE 8 ++#define SSC_TCMR_PERIOD_OFFSET 24 ++#define SSC_TCMR_START_SIZE 4 ++#define SSC_TCMR_START_OFFSET 8 ++#define SSC_TCMR_STTDLY_SIZE 8 ++#define SSC_TCMR_STTDLY_OFFSET 16 ++ ++/* SSC Transmit Frame Mode Register */ ++#define SSC_TFMR 0x0000001c ++#define SSC_TFMR_DATDEF_SIZE 1 ++#define SSC_TFMR_DATDEF_OFFSET 5 ++#define SSC_TFMR_DATLEN_SIZE 5 ++#define SSC_TFMR_DATLEN_OFFSET 0 ++#define SSC_TFMR_DATNB_SIZE 4 ++#define SSC_TFMR_DATNB_OFFSET 8 ++#define SSC_TFMR_FSDEN_SIZE 1 ++#define SSC_TFMR_FSDEN_OFFSET 23 ++#define SSC_TFMR_FSEDGE_SIZE 1 ++#define SSC_TFMR_FSEDGE_OFFSET 24 ++#define SSC_TFMR_FSLEN_SIZE 4 ++#define SSC_TFMR_FSLEN_OFFSET 16 ++#define SSC_TFMR_FSOS_SIZE 3 ++#define SSC_TFMR_FSOS_OFFSET 20 ++#define SSC_TFMR_MSBF_SIZE 1 ++#define SSC_TFMR_MSBF_OFFSET 7 ++ ++/* SSC Receive Hold Register */ ++#define SSC_RHR 0x00000020 ++#define SSC_RHR_RDAT_SIZE 32 ++#define SSC_RHR_RDAT_OFFSET 0 ++ ++/* SSC Transmit Hold Register */ ++#define SSC_THR 0x00000024 ++#define SSC_THR_TDAT_SIZE 32 ++#define SSC_THR_TDAT_OFFSET 0 ++ ++/* SSC Receive Sync. Holding Register */ ++#define SSC_RSHR 0x00000030 ++#define SSC_RSHR_RSDAT_SIZE 16 ++#define SSC_RSHR_RSDAT_OFFSET 0 ++ ++/* SSC Transmit Sync. Holding Register */ ++#define SSC_TSHR 0x00000034 ++#define SSC_TSHR_TSDAT_SIZE 16 ++#define SSC_TSHR_RSDAT_OFFSET 0 ++ ++/* SSC Receive Compare 0 Register */ ++#define SSC_RC0R 0x00000038 ++#define SSC_RC0R_CP0_SIZE 16 ++#define SSC_RC0R_CP0_OFFSET 0 ++ ++/* SSC Receive Compare 1 Register */ ++#define SSC_RC1R 0x0000003c ++#define SSC_RC1R_CP1_SIZE 16 ++#define SSC_RC1R_CP1_OFFSET 0 ++ ++/* SSC Status Register */ ++#define SSC_SR 0x00000040 ++#define SSC_SR_CP0_SIZE 1 ++#define SSC_SR_CP0_OFFSET 8 ++#define SSC_SR_CP1_SIZE 1 ++#define SSC_SR_CP1_OFFSET 9 ++#define SSC_SR_ENDRX_SIZE 1 ++#define SSC_SR_ENDRX_OFFSET 6 ++#define SSC_SR_ENDTX_SIZE 1 ++#define SSC_SR_ENDTX_OFFSET 2 ++#define SSC_SR_OVRUN_SIZE 1 ++#define SSC_SR_OVRUN_OFFSET 5 ++#define SSC_SR_RXBUFF_SIZE 1 ++#define SSC_SR_RXBUFF_OFFSET 7 ++#define SSC_SR_RXEN_SIZE 1 ++#define SSC_SR_RXEN_OFFSET 17 ++#define SSC_SR_RXRDY_SIZE 1 ++#define SSC_SR_RXRDY_OFFSET 4 ++#define SSC_SR_RXSYN_SIZE 1 ++#define SSC_SR_RXSYN_OFFSET 11 ++#define SSC_SR_TXBUFE_SIZE 1 ++#define SSC_SR_TXBUFE_OFFSET 3 ++#define SSC_SR_TXEMPTY_SIZE 1 ++#define SSC_SR_TXEMPTY_OFFSET 1 ++#define SSC_SR_TXEN_SIZE 1 ++#define SSC_SR_TXEN_OFFSET 16 ++#define SSC_SR_TXRDY_SIZE 1 ++#define SSC_SR_TXRDY_OFFSET 0 ++#define SSC_SR_TXSYN_SIZE 1 ++#define SSC_SR_TXSYN_OFFSET 10 ++ ++/* SSC Interrupt Enable Register */ ++#define SSC_IER 0x00000044 ++#define SSC_IER_CP0_SIZE 1 ++#define SSC_IER_CP0_OFFSET 8 ++#define SSC_IER_CP1_SIZE 1 ++#define SSC_IER_CP1_OFFSET 9 ++#define SSC_IER_ENDRX_SIZE 1 ++#define SSC_IER_ENDRX_OFFSET 6 ++#define SSC_IER_ENDTX_SIZE 1 ++#define SSC_IER_ENDTX_OFFSET 2 ++#define SSC_IER_OVRUN_SIZE 1 ++#define SSC_IER_OVRUN_OFFSET 5 ++#define SSC_IER_RXBUFF_SIZE 1 ++#define SSC_IER_RXBUFF_OFFSET 7 ++#define SSC_IER_RXRDY_SIZE 1 ++#define SSC_IER_RXRDY_OFFSET 4 ++#define SSC_IER_RXSYN_SIZE 1 ++#define SSC_IER_RXSYN_OFFSET 11 ++#define SSC_IER_TXBUFE_SIZE 1 ++#define SSC_IER_TXBUFE_OFFSET 3 ++#define SSC_IER_TXEMPTY_SIZE 1 ++#define SSC_IER_TXEMPTY_OFFSET 1 ++#define SSC_IER_TXRDY_SIZE 1 ++#define SSC_IER_TXRDY_OFFSET 0 ++#define SSC_IER_TXSYN_SIZE 1 ++#define SSC_IER_TXSYN_OFFSET 10 ++ ++/* SSC Interrupt Disable Register */ ++#define SSC_IDR 0x00000048 ++#define SSC_IDR_CP0_SIZE 1 ++#define SSC_IDR_CP0_OFFSET 8 ++#define SSC_IDR_CP1_SIZE 1 ++#define SSC_IDR_CP1_OFFSET 9 ++#define SSC_IDR_ENDRX_SIZE 1 ++#define SSC_IDR_ENDRX_OFFSET 6 ++#define SSC_IDR_ENDTX_SIZE 1 ++#define SSC_IDR_ENDTX_OFFSET 2 ++#define SSC_IDR_OVRUN_SIZE 1 ++#define SSC_IDR_OVRUN_OFFSET 5 ++#define SSC_IDR_RXBUFF_SIZE 1 ++#define SSC_IDR_RXBUFF_OFFSET 7 ++#define SSC_IDR_RXRDY_SIZE 1 ++#define SSC_IDR_RXRDY_OFFSET 4 ++#define SSC_IDR_RXSYN_SIZE 1 ++#define SSC_IDR_RXSYN_OFFSET 11 ++#define SSC_IDR_TXBUFE_SIZE 1 ++#define SSC_IDR_TXBUFE_OFFSET 3 ++#define SSC_IDR_TXEMPTY_SIZE 1 ++#define SSC_IDR_TXEMPTY_OFFSET 1 ++#define SSC_IDR_TXRDY_SIZE 1 ++#define SSC_IDR_TXRDY_OFFSET 0 ++#define SSC_IDR_TXSYN_SIZE 1 ++#define SSC_IDR_TXSYN_OFFSET 10 ++ ++/* SSC Interrupt Mask Register */ ++#define SSC_IMR 0x0000004c ++#define SSC_IMR_CP0_SIZE 1 ++#define SSC_IMR_CP0_OFFSET 8 ++#define SSC_IMR_CP1_SIZE 1 ++#define SSC_IMR_CP1_OFFSET 9 ++#define SSC_IMR_ENDRX_SIZE 1 ++#define SSC_IMR_ENDRX_OFFSET 6 ++#define SSC_IMR_ENDTX_SIZE 1 ++#define SSC_IMR_ENDTX_OFFSET 2 ++#define SSC_IMR_OVRUN_SIZE 1 ++#define SSC_IMR_OVRUN_OFFSET 5 ++#define SSC_IMR_RXBUFF_SIZE 1 ++#define SSC_IMR_RXBUFF_OFFSET 7 ++#define SSC_IMR_RXRDY_SIZE 1 ++#define SSC_IMR_RXRDY_OFFSET 4 ++#define SSC_IMR_RXSYN_SIZE 1 ++#define SSC_IMR_RXSYN_OFFSET 11 ++#define SSC_IMR_TXBUFE_SIZE 1 ++#define SSC_IMR_TXBUFE_OFFSET 3 ++#define SSC_IMR_TXEMPTY_SIZE 1 ++#define SSC_IMR_TXEMPTY_OFFSET 1 ++#define SSC_IMR_TXRDY_SIZE 1 ++#define SSC_IMR_TXRDY_OFFSET 0 ++#define SSC_IMR_TXSYN_SIZE 1 ++#define SSC_IMR_TXSYN_OFFSET 10 ++ ++/* SSC PDC Receive Pointer Register */ ++#define SSC_PDC_RPR 0x00000100 ++ ++/* SSC PDC Receive Counter Register */ ++#define SSC_PDC_RCR 0x00000104 ++ ++/* SSC PDC Transmit Pointer Register */ ++#define SSC_PDC_TPR 0x00000108 ++ ++/* SSC PDC Receive Next Pointer Register */ ++#define SSC_PDC_RNPR 0x00000110 ++ ++/* SSC PDC Receive Next Counter Register */ ++#define SSC_PDC_RNCR 0x00000114 ++ ++/* SSC PDC Transmit Counter Register */ ++#define SSC_PDC_TCR 0x0000010c ++ ++/* SSC PDC Transmit Next Pointer Register */ ++#define SSC_PDC_TNPR 0x00000118 ++ ++/* SSC PDC Transmit Next Counter Register */ ++#define SSC_PDC_TNCR 0x0000011c ++ ++/* SSC PDC Transfer Control Register */ ++#define SSC_PDC_PTCR 0x00000120 ++#define SSC_PDC_PTCR_RXTDIS_SIZE 1 ++#define SSC_PDC_PTCR_RXTDIS_OFFSET 1 ++#define SSC_PDC_PTCR_RXTEN_SIZE 1 ++#define SSC_PDC_PTCR_RXTEN_OFFSET 0 ++#define SSC_PDC_PTCR_TXTDIS_SIZE 1 ++#define SSC_PDC_PTCR_TXTDIS_OFFSET 9 ++#define SSC_PDC_PTCR_TXTEN_SIZE 1 ++#define SSC_PDC_PTCR_TXTEN_OFFSET 8 ++ ++/* SSC PDC Transfer Status Register */ ++#define SSC_PDC_PTSR 0x00000124 ++#define SSC_PDC_PTSR_RXTEN_SIZE 1 ++#define SSC_PDC_PTSR_RXTEN_OFFSET 0 ++#define SSC_PDC_PTSR_TXTEN_SIZE 1 ++#define SSC_PDC_PTSR_TXTEN_OFFSET 8 ++ ++/* Bit manipulation macros */ ++#define SSC_BIT(name) (1 << SSC_##name##_OFFSET) ++#define SSC_BF(name,value) (((value) & ((1 << SSC_##name##_SIZE) - 1)) << SSC_##name##_OFFSET) ++#define SSC_BFEXT(name,value) (((value) >> SSC_##name##_OFFSET) & ((1 << SSC_##name##_SIZE) - 1)) ++#define SSC_BFINS(name,value,old) (((old) & ~(((1 << SSC_##name##_SIZE) - 1) << SSC_##name##_OFFSET)) | SSC_BF(name,value)) ++ ++/* Register access macros */ ++#define ssc_readl(port,reg) \ ++ __raw_readl((port)->regs + SSC_##reg) ++#define ssc_writel(port,reg,value) \ ++ __raw_writel((value), (port)->regs + SSC_##reg) ++ ++#endif /* __INCLUDE_ATMEL_SSC_H */ +diff --git a/include/pcmcia/cs_types.h b/include/pcmcia/cs_types.h +index c1d1629..5f38803 100644 +--- a/include/pcmcia/cs_types.h ++++ b/include/pcmcia/cs_types.h +@@ -21,7 +21,7 @@ + #include <sys/types.h> + #endif + +-#if defined(__arm__) || defined(__mips__) ++#if defined(__arm__) || defined(__mips__) || defined(__avr32__) + /* This (ioaddr_t) is exposed to userspace & hence cannot be changed. */ + typedef u_int ioaddr_t; + #else +diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h +new file mode 100644 +index 0000000..4eea637 +--- /dev/null ++++ b/include/video/atmel_lcdc.h +@@ -0,0 +1,196 @@ ++/* ++ * Header file for AT91/AT32 LCD Controller ++ * ++ * Data structure and register user interface ++ * ++ * Copyright (C) 2007 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __ATMEL_LCDC_H__ ++#define __ATMEL_LCDC_H__ ++ ++ /* LCD Controller info data structure */ ++struct atmel_lcdfb_info { ++ spinlock_t lock; ++ struct fb_info *info; ++ void __iomem *mmio; ++ unsigned long irq_base; ++ ++ unsigned int guard_time; ++ struct platform_device *pdev; ++ struct clk *bus_clk; ++ struct clk *lcdc_clk; ++ unsigned int default_bpp; ++ unsigned int default_lcdcon2; ++ unsigned int default_dmacon; ++ void (*atmel_lcdfb_power_control)(int on); ++ struct fb_monspecs *default_monspecs; ++ u32 pseudo_palette[16]; ++}; ++ ++#define ATMEL_LCDC_DMABADDR1 0x00 ++#define ATMEL_LCDC_DMABADDR2 0x04 ++#define ATMEL_LCDC_DMAFRMPT1 0x08 ++#define ATMEL_LCDC_DMAFRMPT2 0x0c ++#define ATMEL_LCDC_DMAFRMADD1 0x10 ++#define ATMEL_LCDC_DMAFRMADD2 0x14 ++ ++#define ATMEL_LCDC_DMAFRMCFG 0x18 ++#define ATMEL_LCDC_FRSIZE (0x7fffff << 0) ++#define ATMEL_LCDC_BLENGTH_OFFSET 24 ++#define ATMEL_LCDC_BLENGTH (0x7f << ATMEL_LCDC_BLENGTH_OFFSET) ++ ++#define ATMEL_LCDC_DMACON 0x1c ++#define ATMEL_LCDC_DMAEN (0x1 << 0) ++#define ATMEL_LCDC_DMARST (0x1 << 1) ++#define ATMEL_LCDC_DMABUSY (0x1 << 2) ++#define ATMEL_LCDC_DMAUPDT (0x1 << 3) ++#define ATMEL_LCDC_DMA2DEN (0x1 << 4) ++ ++#define ATMEL_LCDC_DMA2DCFG 0x20 ++#define ATMEL_LCDC_ADDRINC_OFFSET 0 ++#define ATMEL_LCDC_ADDRINC (0xffff) ++#define ATMEL_LCDC_PIXELOFF_OFFSET 24 ++#define ATMEL_LCDC_PIXELOFF (0x1f << 24) ++ ++#define ATMEL_LCDC_LCDCON1 0x0800 ++#define ATMEL_LCDC_BYPASS (1 << 0) ++#define ATMEL_LCDC_CLKVAL_OFFSET 12 ++#define ATMEL_LCDC_CLKVAL (0x1ff << ATMEL_LCDC_CLKVAL_OFFSET) ++#define ATMEL_LCDC_LINCNT (0x7ff << 21) ++ ++#define ATMEL_LCDC_LCDCON2 0x0804 ++#define ATMEL_LCDC_DISTYPE (3 << 0) ++#define ATMEL_LCDC_DISTYPE_STNMONO (0 << 0) ++#define ATMEL_LCDC_DISTYPE_STNCOLOR (1 << 0) ++#define ATMEL_LCDC_DISTYPE_TFT (2 << 0) ++#define ATMEL_LCDC_SCANMOD (1 << 2) ++#define ATMEL_LCDC_SCANMOD_SINGLE (0 << 2) ++#define ATMEL_LCDC_SCANMOD_DUAL (1 << 2) ++#define ATMEL_LCDC_IFWIDTH (3 << 3) ++#define ATMEL_LCDC_IFWIDTH_4 (0 << 3) ++#define ATMEL_LCDC_IFWIDTH_8 (1 << 3) ++#define ATMEL_LCDC_IFWIDTH_16 (2 << 3) ++#define ATMEL_LCDC_PIXELSIZE (7 << 5) ++#define ATMEL_LCDC_PIXELSIZE_1 (0 << 5) ++#define ATMEL_LCDC_PIXELSIZE_2 (1 << 5) ++#define ATMEL_LCDC_PIXELSIZE_4 (2 << 5) ++#define ATMEL_LCDC_PIXELSIZE_8 (3 << 5) ++#define ATMEL_LCDC_PIXELSIZE_16 (4 << 5) ++#define ATMEL_LCDC_PIXELSIZE_24 (5 << 5) ++#define ATMEL_LCDC_PIXELSIZE_32 (6 << 5) ++#define ATMEL_LCDC_INVVD (1 << 8) ++#define ATMEL_LCDC_INVVD_NORMAL (0 << 8) ++#define ATMEL_LCDC_INVVD_INVERTED (1 << 8) ++#define ATMEL_LCDC_INVFRAME (1 << 9 ) ++#define ATMEL_LCDC_INVFRAME_NORMAL (0 << 9) ++#define ATMEL_LCDC_INVFRAME_INVERTED (1 << 9) ++#define ATMEL_LCDC_INVLINE (1 << 10) ++#define ATMEL_LCDC_INVLINE_NORMAL (0 << 10) ++#define ATMEL_LCDC_INVLINE_INVERTED (1 << 10) ++#define ATMEL_LCDC_INVCLK (1 << 11) ++#define ATMEL_LCDC_INVCLK_NORMAL (0 << 11) ++#define ATMEL_LCDC_INVCLK_INVERTED (1 << 11) ++#define ATMEL_LCDC_INVDVAL (1 << 12) ++#define ATMEL_LCDC_INVDVAL_NORMAL (0 << 12) ++#define ATMEL_LCDC_INVDVAL_INVERTED (1 << 12) ++#define ATMEL_LCDC_CLKMOD (1 << 15) ++#define ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15) ++#define ATMEL_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15) ++#define ATMEL_LCDC_MEMOR (1 << 31) ++#define ATMEL_LCDC_MEMOR_BIG (0 << 31) ++#define ATMEL_LCDC_MEMOR_LITTLE (1 << 31) ++ ++#define ATMEL_LCDC_TIM1 0x0808 ++#define ATMEL_LCDC_VFP (0xff << 0) ++#define ATMEL_LCDC_VBP_OFFSET 8 ++#define ATMEL_LCDC_VBP (0xff << ATMEL_LCDC_VBP_OFFSET) ++#define ATMEL_LCDC_VPW_OFFSET 16 ++#define ATMEL_LCDC_VPW (0x3f << ATMEL_LCDC_VPW_OFFSET) ++#define ATMEL_LCDC_VHDLY_OFFSET 24 ++#define ATMEL_LCDC_VHDLY (0xf << ATMEL_LCDC_VHDLY_OFFSET) ++ ++#define ATMEL_LCDC_TIM2 0x080c ++#define ATMEL_LCDC_HBP (0xff << 0) ++#define ATMEL_LCDC_HPW_OFFSET 8 ++#define ATMEL_LCDC_HPW (0x3f << ATMEL_LCDC_HPW_OFFSET) ++#define ATMEL_LCDC_HFP_OFFSET 21 ++#define ATMEL_LCDC_HFP (0x7ff << ATMEL_LCDC_HFP_OFFSET) ++ ++#define ATMEL_LCDC_LCDFRMCFG 0x0810 ++#define ATMEL_LCDC_LINEVAL (0x7ff << 0) ++#define ATMEL_LCDC_HOZVAL_OFFSET 21 ++#define ATMEL_LCDC_HOZVAL (0x7ff << ATMEL_LCDC_HOZVAL_OFFSET) ++ ++#define ATMEL_LCDC_FIFO 0x0814 ++#define ATMEL_LCDC_FIFOTH (0xffff) ++ ++#define ATMEL_LCDC_MVAL 0x0818 ++ ++#define ATMEL_LCDC_DP1_2 0x081c ++#define ATMEL_LCDC_DP4_7 0x0820 ++#define ATMEL_LCDC_DP3_5 0x0824 ++#define ATMEL_LCDC_DP2_3 0x0828 ++#define ATMEL_LCDC_DP5_7 0x082c ++#define ATMEL_LCDC_DP3_4 0x0830 ++#define ATMEL_LCDC_DP4_5 0x0834 ++#define ATMEL_LCDC_DP6_7 0x0838 ++#define ATMEL_LCDC_DP1_2_VAL (0xff) ++#define ATMEL_LCDC_DP4_7_VAL (0xfffffff) ++#define ATMEL_LCDC_DP3_5_VAL (0xfffff) ++#define ATMEL_LCDC_DP2_3_VAL (0xfff) ++#define ATMEL_LCDC_DP5_7_VAL (0xfffffff) ++#define ATMEL_LCDC_DP3_4_VAL (0xffff) ++#define ATMEL_LCDC_DP4_5_VAL (0xfffff) ++#define ATMEL_LCDC_DP6_7_VAL (0xfffffff) ++ ++#define ATMEL_LCDC_PWRCON 0x083c ++#define ATMEL_LCDC_PWR (1 << 0) ++#define ATMEL_LCDC_GUARDT_OFFSET 1 ++#define ATMEL_LCDC_GUARDT (0x7f << ATMEL_LCDC_GUARDT_OFFSET) ++#define ATMEL_LCDC_BUSY (1 << 31) ++ ++#define ATMEL_LCDC_CONTRAST_CTR 0x0840 ++#define ATMEL_LCDC_PS (3 << 0) ++#define ATMEL_LCDC_PS_DIV1 (0 << 0) ++#define ATMEL_LCDC_PS_DIV2 (1 << 0) ++#define ATMEL_LCDC_PS_DIV4 (2 << 0) ++#define ATMEL_LCDC_PS_DIV8 (3 << 0) ++#define ATMEL_LCDC_POL (1 << 2) ++#define ATMEL_LCDC_POL_NEGATIVE (0 << 2) ++#define ATMEL_LCDC_POL_POSITIVE (1 << 2) ++#define ATMEL_LCDC_ENA (1 << 3) ++#define ATMEL_LCDC_ENA_PWMDISABLE (0 << 3) ++#define ATMEL_LCDC_ENA_PWMENABLE (1 << 3) ++ ++#define ATMEL_LCDC_CONTRAST_VAL 0x0844 ++#define ATMEL_LCDC_CVAL (0xff) ++ ++#define ATMEL_LCDC_IER 0x0848 ++#define ATMEL_LCDC_IDR 0x084c ++#define ATMEL_LCDC_IMR 0x0850 ++#define ATMEL_LCDC_ISR 0x0854 ++#define ATMEL_LCDC_ICR 0x0858 ++#define ATMEL_LCDC_LNI (1 << 0) ++#define ATMEL_LCDC_LSTLNI (1 << 1) ++#define ATMEL_LCDC_EOFI (1 << 2) ++#define ATMEL_LCDC_UFLWI (1 << 4) ++#define ATMEL_LCDC_OWRI (1 << 5) ++#define ATMEL_LCDC_MERI (1 << 6) ++ ++#define ATMEL_LCDC_LUT(n) (0x0c00 + ((n)*4)) ++ ++#endif /* __ATMEL_LCDC_H__ */ +diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl +index f7844f6..6631586 100755 +--- a/scripts/checkstack.pl ++++ b/scripts/checkstack.pl +@@ -12,6 +12,7 @@ + # sh64 port by Paul Mundt + # Random bits by Matt Mackall <mpm@selenic.com> + # M68k port by Geert Uytterhoeven and Andreas Schwab ++# AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com> + # + # Usage: + # objdump -d vmlinux | stackcheck.pl [arch] +@@ -37,6 +38,10 @@ my (@stack, $re, $x, $xs); + if ($arch eq 'arm') { + #c0008ffc: e24dd064 sub sp, sp, #100 ; 0x64 + $re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o; ++ } elsif ($arch eq 'avr32') { ++ #8000008a: 20 1d sub sp,4 ++ #80000ca8: fa cd 05 b0 sub sp,sp,1456 ++ $re = qr/^.*sub.*sp.*,([0-9]{1,8})/o; + } elsif ($arch =~ /^i[3456]86$/) { + #c0105234: 81 ec ac 05 00 00 sub $0x5ac,%esp + $re = qr/^.*[as][du][db] \$(0x$x{1,8}),\%esp$/o; +diff --git a/sound/Kconfig b/sound/Kconfig +index 97532bb..2bad674 100644 +--- a/sound/Kconfig ++++ b/sound/Kconfig +@@ -62,9 +62,13 @@ source "sound/aoa/Kconfig" + + source "sound/arm/Kconfig" + ++source "sound/spi/Kconfig" ++ ++source "sound/avr32/Kconfig" ++ + source "sound/mips/Kconfig" + +-# the following will depend on the order of config. ++# tee following will depend on the order of config. + # here assuming USB is defined before ALSA + source "sound/usb/Kconfig" + +diff --git a/sound/Makefile b/sound/Makefile +index b7c7fb7..fda6893 100644 +--- a/sound/Makefile ++++ b/sound/Makefile +@@ -5,7 +5,8 @@ obj-$(CONFIG_SOUND) += soundcore.o + obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o + obj-$(CONFIG_SOUND_PRIME) += oss/ + obj-$(CONFIG_DMASOUND) += oss/ +-obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/ soc/ ++obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ avr32/ synth/ usb/ \ ++ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ + obj-$(CONFIG_SND_AOA) += aoa/ + + # This one must be compilable even if sound is configured out +diff --git a/sound/avr32/Kconfig b/sound/avr32/Kconfig +new file mode 100644 +index 0000000..adfe779 +--- /dev/null ++++ b/sound/avr32/Kconfig +@@ -0,0 +1,12 @@ ++menu "AVR32 devices" ++ depends on SND != n && AVR32 ++ ++config SND_ATMEL_AC97 ++ tristate "Atmel AC97 Controller Driver" ++ depends on SND ++ select SND_PCM ++ select SND_AC97_CODEC ++ help ++ ALSA sound driver for the Atmel AC97 controller. ++ ++endmenu +diff --git a/sound/avr32/Makefile b/sound/avr32/Makefile +new file mode 100644 +index 0000000..fd864b7 +--- /dev/null ++++ b/sound/avr32/Makefile +@@ -0,0 +1,6 @@ ++# ++# Makefile for ALSA ++# ++ ++snd-atmel-ac97-objs := ac97c.o ++obj-$(CONFIG_SND_ATMEL_AC97) += snd-atmel-ac97.o +diff --git a/sound/avr32/ac97c.c b/sound/avr32/ac97c.c +new file mode 100644 +index 0000000..32f6639 +--- /dev/null ++++ b/sound/avr32/ac97c.c +@@ -0,0 +1,880 @@ ++/* ++ * Driver for the Atmel AC97 Controller ++ * ++ * Copyright (C) 2005-2006 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#include <linux/clk.h> ++#include <linux/delay.h> ++#include <linux/dma-mapping.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/mutex.h> ++ ++#include <sound/driver.h> ++#include <sound/core.h> ++#include <sound/initval.h> ++#include <sound/pcm.h> ++#include <sound/pcm_params.h> ++#include <sound/ac97_codec.h> ++#include <sound/memalloc.h> ++ ++#include <asm/io.h> ++#include <asm/dma-controller.h> ++ ++#include "ac97c.h" ++ ++/* ++ * Module parameters ++ */ ++static char *id; ++module_param(id, charp, 0444); ++MODULE_PARM_DESC(id, "ID string for Atmel AC97 controller"); ++ ++static DEFINE_MUTEX(opened_mutex); ++ ++struct atmel_ac97_dma_info { ++ struct dma_request_cyclic req_tx; ++ struct dma_request_cyclic req_rx; ++ unsigned short rx_periph_id; ++ unsigned short tx_periph_id; ++}; ++ ++typedef struct atmel_ac97 { ++ spinlock_t lock; ++ void __iomem *regs; ++ struct snd_pcm_substream *playback_substream; ++ struct snd_pcm_substream *capture_substream; ++ struct snd_card *card; ++ struct snd_pcm *pcm; ++ struct snd_ac97 *ac97; ++ struct snd_ac97_bus *ac97_bus; ++ int opened; ++ int period; ++ u64 cur_format; ++ unsigned int cur_rate; ++ struct clk *mck; ++ struct platform_device *pdev; ++ struct atmel_ac97_dma_info dma; ++} atmel_ac97_t; ++#define get_chip(card) ((atmel_ac97_t *)(card)->private_data) ++ ++#define ac97c_writel(chip, reg, val) \ ++ __raw_writel((val), (chip)->regs + AC97C_##reg) ++#define ac97c_readl(chip, reg) \ ++ __raw_readl((chip)->regs + AC97C_##reg) ++ ++/* ++ * PCM part ++ */ ++static struct snd_pcm_hardware snd_atmel_ac97_playback_hw = { ++ .info = (SNDRV_PCM_INFO_INTERLEAVED ++ |SNDRV_PCM_INFO_MMAP ++ |SNDRV_PCM_INFO_MMAP_VALID ++ |SNDRV_PCM_INFO_BLOCK_TRANSFER ++ |SNDRV_PCM_INFO_JOINT_DUPLEX), ++ .formats = (SNDRV_PCM_FMTBIT_S16_BE|SNDRV_PCM_FMTBIT_S16_LE), ++ .rates = (SNDRV_PCM_RATE_CONTINUOUS), ++ .rate_min = 4000, ++ .rate_max = 48000, ++ .channels_min = 1, ++ .channels_max = 6, ++ .buffer_bytes_max = 64*1024, ++ .period_bytes_min = 512, ++ .period_bytes_max = 4095, ++ .periods_min = 8, ++ .periods_max = 1024, ++}; ++ ++static struct snd_pcm_hardware snd_atmel_ac97_capture_hw = { ++ .info = (SNDRV_PCM_INFO_INTERLEAVED ++ |SNDRV_PCM_INFO_MMAP ++ |SNDRV_PCM_INFO_MMAP_VALID ++ |SNDRV_PCM_INFO_BLOCK_TRANSFER ++ |SNDRV_PCM_INFO_JOINT_DUPLEX), ++ .formats = (SNDRV_PCM_FMTBIT_S16_BE|SNDRV_PCM_FMTBIT_S16_LE), ++ .rates = (SNDRV_PCM_RATE_CONTINUOUS), ++ .rate_min = 4000, ++ .rate_max = 48000, ++ .channels_min = 1, ++ .channels_max = 2, ++ .buffer_bytes_max = 64*1024, ++ .period_bytes_min = 512, ++ .period_bytes_max = 4095, ++ .periods_min = 8, ++ .periods_max = 1024, ++}; ++ ++/* Joint full duplex variables */ ++unsigned int hw_rates[1]; ++unsigned int hw_formats[1]; ++struct snd_pcm_hw_constraint_list hw_constraint_rates; ++struct snd_pcm_hw_constraint_list hw_constraint_formats; ++ ++/* ++ * PCM functions ++ */ ++static int ++snd_atmel_ac97_playback_open(struct snd_pcm_substream *substream) ++{ ++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream); ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ ++ mutex_lock(&opened_mutex); ++ chip->opened++; ++ runtime->hw = snd_atmel_ac97_playback_hw; ++ if (chip->cur_rate) { ++ runtime->hw.rate_min = chip->cur_rate; ++ runtime->hw.rate_max = chip->cur_rate; ++ } ++ if (chip->cur_format) ++ runtime->hw.formats = (1ULL<<chip->cur_format); ++ mutex_unlock(&opened_mutex); ++ chip->playback_substream = substream; ++ chip->period = 0; ++ return 0; ++} ++ ++static int ++snd_atmel_ac97_capture_open(struct snd_pcm_substream *substream) ++{ ++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream); ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ ++ mutex_lock(&opened_mutex); ++ chip->opened++; ++ runtime->hw = snd_atmel_ac97_capture_hw; ++ if (chip->cur_rate) { ++ runtime->hw.rate_min = chip->cur_rate; ++ runtime->hw.rate_max = chip->cur_rate; ++ } ++ if (chip->cur_format) ++ runtime->hw.formats = (1ULL<<chip->cur_format); ++ mutex_unlock(&opened_mutex); ++ chip->capture_substream = substream; ++ chip->period = 0; ++ return 0; ++} ++ ++static int snd_atmel_ac97_playback_close(struct snd_pcm_substream *substream) ++{ ++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream); ++ mutex_lock(&opened_mutex); ++ chip->opened--; ++ if (!chip->opened) { ++ chip->cur_rate = 0; ++ chip->cur_format = 0; ++ } ++ mutex_unlock(&opened_mutex); ++ return 0; ++} ++ ++static int snd_atmel_ac97_capture_close(struct snd_pcm_substream *substream) ++{ ++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream); ++ mutex_lock(&opened_mutex); ++ chip->opened--; ++ if (!chip->opened) { ++ chip->cur_rate = 0; ++ chip->cur_format = 0; ++ } ++ mutex_unlock(&opened_mutex); ++ return 0; ++} ++ ++static int snd_atmel_ac97_playback_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *hw_params) ++{ ++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream); ++ int err; ++ ++ err = snd_pcm_lib_malloc_pages(substream, ++ params_buffer_bytes(hw_params)); ++ if (err < 0) ++ return err; ++ ++ /* Set restrictions to params */ ++ mutex_lock(&opened_mutex); ++ chip->cur_rate = params_rate(hw_params); ++ chip->cur_format = params_format(hw_params); ++ mutex_unlock(&opened_mutex); ++ ++ return 0; ++} ++ ++static int snd_atmel_ac97_capture_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *hw_params) ++{ ++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream); ++ int err; ++ ++ err = snd_pcm_lib_malloc_pages(substream, ++ params_buffer_bytes(hw_params)); ++ if (err < 0) ++ return err; ++ ++ /* Set restrictions to params */ ++ mutex_lock(&opened_mutex); ++ chip->cur_rate = params_rate(hw_params); ++ chip->cur_format = params_format(hw_params); ++ mutex_unlock(&opened_mutex); ++ ++ return 0; ++} ++ ++static int snd_atmel_ac97_playback_hw_free(struct snd_pcm_substream *substream) ++{ ++ return snd_pcm_lib_free_pages(substream); ++} ++ ++static int snd_atmel_ac97_capture_hw_free(struct snd_pcm_substream *substream) ++{ ++ ++ return snd_pcm_lib_free_pages(substream); ++} ++ ++static int snd_atmel_ac97_playback_prepare(struct snd_pcm_substream *substream) ++{ ++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream); ++ struct platform_device *pdev = chip->pdev; ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ int block_size = frames_to_bytes(runtime, runtime->period_size); ++ unsigned long word = 0; ++ unsigned long buffer_size = 0; ++ ++ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr, ++ block_size * 2, DMA_TO_DEVICE); ++ ++ /* Assign slots to channels */ ++ switch (substream->runtime->channels) { ++ case 1: ++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A); ++ break; ++ case 2: ++ /* Assign Left and Right slot to Channel A */ ++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A) ++ | AC97C_CH_ASSIGN(PCM_RIGHT, A); ++ break; ++ default: ++ /* TODO: support more than two channels */ ++ return -EINVAL; ++ break; ++ } ++ ac97c_writel(chip, OCA, word); ++ ++ /* Configure sample format and size */ ++ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16; ++ ++ switch (runtime->format){ ++ case SNDRV_PCM_FORMAT_S16_LE: ++ word |= AC97C_CMR_CEM_LITTLE; ++ break; ++ case SNDRV_PCM_FORMAT_S16_BE: ++ default: ++ word &= ~AC97C_CMR_CEM_LITTLE; ++ break; ++ } ++ ++ ac97c_writel(chip, CAMR, word); ++ ++ /* Set variable rate if needed */ ++ if (runtime->rate != 48000) { ++ word = ac97c_readl(chip, MR); ++ word |= AC97C_MR_VRA; ++ ac97c_writel(chip, MR, word); ++ } else { ++ /* Clear Variable Rate Bit */ ++ word = ac97c_readl(chip, MR); ++ word &= ~AC97C_MR_VRA; ++ ac97c_writel(chip, MR, word); ++ } ++ ++ /* Set rate */ ++ snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate); ++ ++ buffer_size = frames_to_bytes(runtime, runtime->period_size) * ++ runtime->periods; ++ ++ chip->dma.req_tx.buffer_size = buffer_size; ++ chip->dma.req_tx.periods = runtime->periods; ++ ++ BUG_ON(chip->dma.req_tx.buffer_size != ++ (chip->dma.req_tx.periods * ++ frames_to_bytes(runtime, runtime->period_size))); ++ ++ chip->dma.req_tx.buffer_start = runtime->dma_addr; ++ chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2); ++ chip->dma.req_tx.periph_id = chip->dma.tx_periph_id; ++ chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH; ++ chip->dma.req_tx.width = DMA_WIDTH_16BIT; ++ chip->dma.req_tx.dev_id = chip; ++ ++ return 0; ++} ++ ++static int snd_atmel_ac97_capture_prepare(struct snd_pcm_substream *substream) ++{ ++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream); ++ struct platform_device *pdev = chip->pdev; ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ int block_size = frames_to_bytes(runtime, runtime->period_size); ++ unsigned long word = 0; ++ unsigned long buffer_size = 0; ++ ++ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr, ++ block_size * 2, DMA_FROM_DEVICE); ++ ++ /* Assign slots to channels */ ++ switch (substream->runtime->channels) { ++ case 1: ++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A); ++ break; ++ case 2: ++ /* Assign Left and Right slot to Channel A */ ++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A) ++ | AC97C_CH_ASSIGN(PCM_RIGHT, A); ++ break; ++ default: ++ /* TODO: support more than two channels */ ++ return -EINVAL; ++ break; ++ } ++ ac97c_writel(chip, ICA, word); ++ ++ /* Configure sample format and size */ ++ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16; ++ ++ switch (runtime->format) { ++ case SNDRV_PCM_FORMAT_S16_LE: ++ word |= AC97C_CMR_CEM_LITTLE; ++ break; ++ case SNDRV_PCM_FORMAT_S16_BE: ++ default: ++ word &= ~(AC97C_CMR_CEM_LITTLE); ++ break; ++ } ++ ++ ac97c_writel(chip, CAMR, word); ++ ++ /* Set variable rate if needed */ ++ if (runtime->rate != 48000) { ++ word = ac97c_readl(chip, MR); ++ word |= AC97C_MR_VRA; ++ ac97c_writel(chip, MR, word); ++ } else { ++ /* Clear Variable Rate Bit */ ++ word = ac97c_readl(chip, MR); ++ word &= ~(AC97C_MR_VRA); ++ ac97c_writel(chip, MR, word); ++ } ++ ++ /* Set rate */ ++ snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate); ++ ++ buffer_size = frames_to_bytes(runtime, runtime->period_size) * ++ runtime->periods; ++ ++ chip->dma.req_rx.buffer_size = buffer_size; ++ chip->dma.req_rx.periods = runtime->periods; ++ ++ BUG_ON(chip->dma.req_rx.buffer_size != ++ (chip->dma.req_rx.periods * ++ frames_to_bytes(runtime, runtime->period_size))); ++ ++ chip->dma.req_rx.buffer_start = runtime->dma_addr; ++ chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2); ++ chip->dma.req_rx.periph_id = chip->dma.rx_periph_id; ++ chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM; ++ chip->dma.req_rx.width = DMA_WIDTH_16BIT; ++ chip->dma.req_rx.dev_id = chip; ++ ++ return 0; ++} ++ ++static int snd_atmel_ac97_playback_trigger(struct snd_pcm_substream *substream, int cmd) ++{ ++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream); ++ unsigned long camr; ++ int flags, err = 0; ++ ++ spin_lock_irqsave(&chip->lock, flags); ++ camr = ac97c_readl(chip, CAMR); ++ ++ switch (cmd) { ++ case SNDRV_PCM_TRIGGER_START: ++ err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac, ++ &chip->dma.req_tx); ++ dma_start_request(chip->dma.req_tx.req.dmac, ++ chip->dma.req_tx.req.channel); ++ camr |= AC97C_CMR_CENA; ++ break; ++ case SNDRV_PCM_TRIGGER_STOP: ++ err = dma_stop_request(chip->dma.req_tx.req.dmac, ++ chip->dma.req_tx.req.channel); ++ if (chip->opened <= 1) ++ camr &= ~AC97C_CMR_CENA; ++ break; ++ default: ++ err = -EINVAL; ++ break; ++ } ++ ++ ac97c_writel(chip, CAMR, camr); ++ ++ spin_unlock_irqrestore(&chip->lock, flags); ++ return err; ++} ++ ++static int snd_atmel_ac97_capture_trigger(struct snd_pcm_substream *substream, int cmd) ++{ ++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream); ++ unsigned long camr; ++ int flags, err = 0; ++ ++ spin_lock_irqsave(&chip->lock, flags); ++ camr = ac97c_readl(chip, CAMR); ++ ++ switch (cmd) { ++ case SNDRV_PCM_TRIGGER_START: ++ err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac, ++ &chip->dma.req_rx); ++ dma_start_request(chip->dma.req_rx.req.dmac, ++ chip->dma.req_rx.req.channel); ++ camr |= AC97C_CMR_CENA; ++ break; ++ case SNDRV_PCM_TRIGGER_STOP: ++ err = dma_stop_request(chip->dma.req_rx.req.dmac, ++ chip->dma.req_rx.req.channel); ++ mutex_lock(&opened_mutex); ++ if (chip->opened <= 1) ++ camr &= ~AC97C_CMR_CENA; ++ mutex_unlock(&opened_mutex); ++ break; ++ default: ++ err = -EINVAL; ++ break; ++ } ++ ++ ac97c_writel(chip, CAMR, camr); ++ ++ spin_unlock_irqrestore(&chip->lock, flags); ++ return err; ++} ++ ++static snd_pcm_uframes_t snd_atmel_ac97_playback_pointer(struct snd_pcm_substream *substream) ++{ ++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream); ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ snd_pcm_uframes_t pos; ++ unsigned long bytes; ++ ++ bytes = (dma_get_current_pos ++ (chip->dma.req_tx.req.dmac, ++ chip->dma.req_tx.req.channel) - runtime->dma_addr); ++ pos = bytes_to_frames(runtime, bytes); ++ if (pos >= runtime->buffer_size) ++ pos -= runtime->buffer_size; ++ ++ return pos; ++} ++ ++static snd_pcm_uframes_t snd_atmel_ac97_capture_pointer(struct snd_pcm_substream *substream) ++{ ++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream); ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ snd_pcm_uframes_t pos; ++ unsigned long bytes; ++ ++ bytes = (dma_get_current_pos ++ (chip->dma.req_rx.req.dmac,chip->dma.req_rx.req.channel) - ++ runtime->dma_addr); ++ pos = bytes_to_frames(runtime, bytes); ++ if (pos >= runtime->buffer_size) ++ pos -= runtime->buffer_size; ++ ++ ++ return pos; ++} ++ ++static struct snd_pcm_ops atmel_ac97_playback_ops = { ++ .open = snd_atmel_ac97_playback_open, ++ .close = snd_atmel_ac97_playback_close, ++ .ioctl = snd_pcm_lib_ioctl, ++ .hw_params = snd_atmel_ac97_playback_hw_params, ++ .hw_free = snd_atmel_ac97_playback_hw_free, ++ .prepare = snd_atmel_ac97_playback_prepare, ++ .trigger = snd_atmel_ac97_playback_trigger, ++ .pointer = snd_atmel_ac97_playback_pointer, ++}; ++ ++static struct snd_pcm_ops atmel_ac97_capture_ops = { ++ .open = snd_atmel_ac97_capture_open, ++ .close = snd_atmel_ac97_capture_close, ++ .ioctl = snd_pcm_lib_ioctl, ++ .hw_params = snd_atmel_ac97_capture_hw_params, ++ .hw_free = snd_atmel_ac97_capture_hw_free, ++ .prepare = snd_atmel_ac97_capture_prepare, ++ .trigger = snd_atmel_ac97_capture_trigger, ++ .pointer = snd_atmel_ac97_capture_pointer, ++}; ++ ++static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = { ++ /* Playback */ ++ { ++ .exclusive = 1, ++ .r = { { ++ .slots = ((1 << AC97_SLOT_PCM_LEFT) ++ | (1 << AC97_SLOT_PCM_RIGHT) ++ | (1 << AC97_SLOT_PCM_CENTER) ++ | (1 << AC97_SLOT_PCM_SLEFT) ++ | (1 << AC97_SLOT_PCM_SRIGHT) ++ | (1 << AC97_SLOT_LFE)), ++ } } ++ }, ++ /* PCM in */ ++ { ++ .stream = 1, ++ .exclusive = 1, ++ .r = { { ++ .slots = ((1 << AC97_SLOT_PCM_LEFT) ++ | (1 << AC97_SLOT_PCM_RIGHT)), ++ } } ++ }, ++ /* Mic in */ ++ { ++ .stream = 1, ++ .exclusive = 1, ++ .r = { { ++ .slots = (1<<AC97_SLOT_MIC), ++ } } ++ }, ++}; ++ ++static int __devinit snd_atmel_ac97_pcm_new(atmel_ac97_t *chip) ++{ ++ struct snd_pcm *pcm; ++ int err; ++ ++ err = snd_ac97_pcm_assign(chip->ac97_bus, ++ ARRAY_SIZE(atmel_ac97_pcm_defs), ++ atmel_ac97_pcm_defs); ++ if (err) ++ return err; ++ ++ err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm); ++ if (err) ++ return err; ++ ++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, ++ &atmel_ac97_playback_ops); ++ ++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, ++ &atmel_ac97_capture_ops); ++ ++ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, ++ &chip->pdev->dev, ++ 128 * 1024, 128 * 1024); ++ ++ pcm->private_data = chip; ++ pcm->info_flags = 0; ++ strcpy(pcm->name, "Atmel-AC97"); ++ chip->pcm = pcm; ++ ++ return 0; ++} ++ ++/* Mixer part */ ++static int snd_atmel_ac97_mixer_new(atmel_ac97_t *chip) ++{ ++ int err; ++ struct snd_ac97_template template; ++ ++ memset(&template, 0, sizeof(template)); ++ template.private_data = chip; ++ err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97); ++ ++ return err; ++} ++ ++static void atmel_ac97_error(struct dma_request *_req) ++{ ++ struct dma_request_cyclic *req = to_dma_request_cyclic(_req); ++ ++ printk(KERN_WARNING ++ "DMA Controller error, channel %d (AC97C)\n", ++ req->req.channel); ++} ++ ++static void atmel_ac97_block_complete(struct dma_request *_req) ++{ ++ struct dma_request_cyclic *req = to_dma_request_cyclic(_req); ++ atmel_ac97_t *chip = req->dev_id; ++ if (req->periph_id == chip->dma.tx_periph_id) ++ snd_pcm_period_elapsed(chip->playback_substream); ++ else ++ snd_pcm_period_elapsed(chip->capture_substream); ++} ++ ++/* ++ * Codec part ++ */ ++static void snd_atmel_ac97_write(struct snd_ac97 *ac97, unsigned short reg, ++ unsigned short val) ++{ ++ atmel_ac97_t *chip = get_chip(ac97); ++ unsigned long word; ++ int timeout = 40; ++ ++ word = (reg & 0x7f) << 16 | val; ++ ++ do { ++ if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) { ++ ac97c_writel(chip, COTHR, word); ++ return; ++ } ++ udelay(1); ++ } while (--timeout); ++ ++ snd_printk(KERN_WARNING "atmel-ac97: codec write timeout\n"); ++} ++ ++static unsigned short snd_atmel_ac97_read(struct snd_ac97 *ac97, ++ unsigned short reg) ++{ ++ atmel_ac97_t *chip = get_chip(ac97); ++ unsigned long word; ++ int timeout = 40; ++ int write = 10; ++ ++ word = (0x80 | (reg & 0x7f)) << 16; ++ ++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0) ++ ac97c_readl(chip, CORHR); ++ ++retry_write: ++ timeout = 40; ++ ++ do { ++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) { ++ ac97c_writel(chip, COTHR, word); ++ goto read_reg; ++ } ++ mdelay(10); ++ } while (--timeout); ++ ++ if (!--write) ++ goto timed_out; ++ goto retry_write; ++ ++read_reg: ++ do { ++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0){ ++ unsigned short val = ac97c_readl(chip, CORHR); ++ return val; ++ } ++ mdelay(10); ++ } while (--timeout); ++ ++ if (!--write) ++ goto timed_out; ++ goto retry_write; ++ ++timed_out: ++ snd_printk(KERN_INFO "atmel-ac97: codec read timeout\n"); ++ return 0xffff; ++} ++ ++static void snd_atmel_ac97_reset(atmel_ac97_t *chip) ++{ ++ /* TODO: Perform hard reset of codec as well */ ++ ac97c_writel(chip, MR, AC97C_MR_WRST); ++ mdelay(1); ++ ac97c_writel(chip, MR, AC97C_MR_ENA); ++} ++ ++static void snd_atmel_ac97_destroy(struct snd_card *card) ++{ ++ atmel_ac97_t *chip = get_chip(card); ++ ++ if (chip->regs) ++ iounmap(chip->regs); ++ ++ if (chip->mck) { ++ clk_disable(chip->mck); ++ clk_put(chip->mck); ++ } ++ ++ if (chip->dma.req_tx.req.dmac){ ++ dma_release_channel(chip->dma.req_tx.req.dmac, ++ chip->dma.req_tx.req.channel); ++ } ++ if (chip->dma.req_rx.req.dmac) { ++ dma_release_channel(chip->dma.req_rx.req.dmac, ++ chip->dma.req_rx.req.channel); ++ } ++} ++ ++static int __devinit snd_atmel_ac97_create(struct snd_card *card, ++ struct platform_device *pdev) ++{ ++ static struct snd_ac97_bus_ops ops = { ++ .write = snd_atmel_ac97_write, ++ .read = snd_atmel_ac97_read, ++ }; ++ atmel_ac97_t *chip = get_chip(card); ++ struct resource *regs; ++ struct clk *mck; ++ int err; ++ ++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!regs) ++ return -ENXIO; ++ ++ mck = clk_get(&pdev->dev, "pclk"); ++ if (IS_ERR(mck)) ++ return PTR_ERR(mck); ++ clk_enable(mck); ++ chip->mck = mck; ++ ++ card->private_free = snd_atmel_ac97_destroy; ++ ++ spin_lock_init(&chip->lock); ++ chip->card = card; ++ chip->pdev = pdev; ++ ++ chip->regs = ioremap(regs->start, regs->end - regs->start + 1); ++ if (!chip->regs) ++ return -ENOMEM; ++ ++ snd_card_set_dev(card, &pdev->dev); ++ ++ err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus); ++ ++ return err; ++} ++ ++static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev) ++{ ++ static int dev; ++ struct snd_card *card; ++ atmel_ac97_t *chip; ++ int err; ++ int ch; ++ ++ mutex_init(&opened_mutex); ++ ++ err = -ENOMEM; ++ card = snd_card_new(-1, id, THIS_MODULE, sizeof(atmel_ac97_t)); ++ if (!card) ++ goto out; ++ chip = get_chip(card); ++ ++ err = snd_atmel_ac97_create(card, pdev); ++ if (err) ++ goto out_free_card; ++ ++ snd_atmel_ac97_reset(chip); ++ ++ err = snd_atmel_ac97_mixer_new(chip); ++ if (err) ++ goto out_free_card; ++ ++ err = snd_atmel_ac97_pcm_new(chip); ++ if (err) ++ goto out_free_card; ++ ++ /* TODO: Get this information from the platform device */ ++ chip->dma.req_tx.req.dmac = find_dma_controller(0); ++ if (!chip->dma.req_tx.req.dmac) { ++ printk(KERN_ERR ++ "atmel-ac97c: No DMA controller for TX, aborting\n"); ++ goto out_free_card; ++ } ++ chip->dma.req_rx.req.dmac = find_dma_controller(0); ++ if (!chip->dma.req_rx.req.dmac) { ++ snd_printk(KERN_ERR ++ "atmel-ac97c: No DMA controller available for RX, aborting\n"); ++ goto out_free_card; ++ } ++ ++ chip->dma.rx_periph_id = 3; ++ chip->dma.tx_periph_id = 4; ++ ++ ch = dma_alloc_channel(chip->dma.req_tx.req.dmac); ++ if (ch < 0) { ++ printk(KERN_ERR ++ "atmel-ac97c: Unable to allocate TX DMA channel, aborting\n"); ++ goto out_free_card; ++ } ++ chip->dma.req_tx.req.channel = ch; ++ chip->dma.req_tx.width = DMA_WIDTH_16BIT; ++ chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete; ++ chip->dma.req_tx.req.error = atmel_ac97_error; ++ ++ ch = dma_alloc_channel(chip->dma.req_rx.req.dmac); ++ if (ch < 0) { ++ snd_printk(KERN_ERR ++ "atmel-ac97c: Unable to allocate RX DMA channel, aborting\n"); ++ goto out_free_card; ++ } ++ chip->dma.req_rx.req.channel = ch; ++ chip->dma.req_rx.width = DMA_WIDTH_16BIT; ++ chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete; ++ chip->dma.req_rx.req.error = atmel_ac97_error; ++ ++ strcpy(card->driver, "ac97c"); ++ strcpy(card->shortname, "Atmel-AC97"); ++ sprintf(card->longname, "Atmel AVR32 AC97 Controller at 0x%p, dma rx %i and tx %i", ++ chip->regs, chip->dma.rx_periph_id, chip->dma.tx_periph_id); ++ ++ err = snd_card_register(card); ++ if (err) ++ goto out_free_card; ++ ++ platform_set_drvdata(pdev, card); ++ dev++; ++ return 0; ++ ++out_free_card: ++ snd_card_free(card); ++out: ++ return err; ++} ++ ++static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev) ++{ ++ struct snd_card *card = platform_get_drvdata(pdev); ++ ++ snd_card_free(card); ++ platform_set_drvdata(pdev, NULL); ++ return 0; ++} ++ ++static struct platform_driver atmel_ac97_driver = { ++ .remove = __devexit_p(snd_atmel_ac97_remove), ++ .driver = { ++ .name = "atmel_ac97c", ++ }, ++}; ++ ++static int __init atmel_ac97_init(void) ++{ ++ return platform_driver_probe(&atmel_ac97_driver, snd_atmel_ac97_probe); ++} ++ ++static void __exit atmel_ac97_exit(void) ++{ ++ platform_driver_unregister(&atmel_ac97_driver); ++} ++ ++module_init(atmel_ac97_init); ++module_exit(atmel_ac97_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("Driver for Atmel AC97 Controller"); ++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); +diff --git a/sound/avr32/ac97c.h b/sound/avr32/ac97c.h +new file mode 100644 +index 0000000..96246e7 +--- /dev/null ++++ b/sound/avr32/ac97c.h +@@ -0,0 +1,71 @@ ++/* ++ * Register definitions for the Atmel AC97 Controller. ++ * ++ * Copyright (C) 2005-2006 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#ifndef __SOUND_AVR32_AC97C_H ++#define __SOUND_AVR32_AC97C_H ++ ++#define AC97C_MR 0x08 ++#define AC97C_ICA 0x10 ++#define AC97C_OCA 0x14 ++#define AC97C_CARHR 0x20 ++#define AC97C_CATHR 0x24 ++#define AC97C_CASR 0x28 ++#define AC97C_CAMR 0x2c ++#define AC97C_CBRHR 0x30 ++#define AC97C_CBTHR 0x34 ++#define AC97C_CBSR 0x38 ++#define AC97C_CBMR 0x3c ++#define AC97C_CORHR 0x40 ++#define AC97C_COTHR 0x44 ++#define AC97C_COSR 0x48 ++#define AC97C_COMR 0x4c ++#define AC97C_SR 0x50 ++#define AC97C_IER 0x54 ++#define AC97C_IDR 0x58 ++#define AC97C_IMR 0x5c ++#define AC97C_VERSION 0xfc ++ ++#define AC97C_CATPR PDC_TPR ++#define AC97C_CATCR PDC_TCR ++#define AC97C_CATNPR PDC_TNPR ++#define AC97C_CATNCR PDC_TNCR ++#define AC97C_CARPR PDC_RPR ++#define AC97C_CARCR PDC_RCR ++#define AC97C_CARNPR PDC_RNPR ++#define AC97C_CARNCR PDC_RNCR ++#define AC97C_PTCR PDC_PTCR ++ ++#define AC97C_MR_ENA (1 << 0) ++#define AC97C_MR_WRST (1 << 1) ++#define AC97C_MR_VRA (1 << 2) ++ ++#define AC97C_CSR_TXRDY (1 << 0) ++#define AC97C_CSR_UNRUN (1 << 2) ++#define AC97C_CSR_RXRDY (1 << 4) ++#define AC97C_CSR_ENDTX (1 << 10) ++#define AC97C_CSR_ENDRX (1 << 14) ++ ++#define AC97C_CMR_SIZE_20 (0 << 16) ++#define AC97C_CMR_SIZE_18 (1 << 16) ++#define AC97C_CMR_SIZE_16 (2 << 16) ++#define AC97C_CMR_SIZE_10 (3 << 16) ++#define AC97C_CMR_CEM_LITTLE (1 << 18) ++#define AC97C_CMR_CEM_BIG (0 << 18) ++#define AC97C_CMR_CENA (1 << 21) ++#define AC97C_CMR_PDCEN (1 << 22) ++ ++#define AC97C_SR_CAEVT (1 << 3) ++ ++#define AC97C_CH_ASSIGN(slot, channel) \ ++ (AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3))) ++#define AC97C_CHANNEL_NONE 0x0 ++#define AC97C_CHANNEL_A 0x1 ++#define AC97C_CHANNEL_B 0x2 ++ ++#endif /* __SOUND_AVR32_AC97C_H */ +diff --git a/sound/spi/Kconfig b/sound/spi/Kconfig +new file mode 100644 +index 0000000..6814353 +--- /dev/null ++++ b/sound/spi/Kconfig +@@ -0,0 +1,31 @@ ++#SPI drivers ++ ++menu "SPI devices" ++ depends on SND != n ++ ++config SND_AT73C213 ++ tristate "Atmel AT73C213 DAC driver" ++ depends on ATMEL_SSC ++ select SND_PCM ++ help ++ Say Y here if you want to use the Atmel AT73C213 DAC. This device can ++ be found on several development boards for AT91 and AVR32. ++ ++ This driver requires the Atmel SSC driver for sound sink, a ++ peripheral found on most AT91 and AVR32 microprocessors. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called snd-at73c213. ++ ++config SND_AT73C213_TARGET_BITRATE ++ int "Target bitrate for AT73C213" ++ depends on SND_AT73C213 ++ default "48000" ++ range 8000 50000 ++ help ++ Sets the target bitrate for the bitrate calculator in the driver. ++ Limited by hardware to be between 8000 Hz and 50000 Hz. ++ ++ Set to 48000 Hz by default. ++ ++endmenu +diff --git a/sound/spi/Makefile b/sound/spi/Makefile +new file mode 100644 +index 0000000..026fb73 +--- /dev/null ++++ b/sound/spi/Makefile +@@ -0,0 +1,5 @@ ++# Makefile for SPI drivers ++ ++snd-at73c213-objs := at73c213.o ++ ++obj-$(CONFIG_SND_AT73C213) += snd-at73c213.o +diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c +new file mode 100644 +index 0000000..f94e417 +--- /dev/null ++++ b/sound/spi/at73c213.c +@@ -0,0 +1,1123 @@ ++/* ++ * Driver for AT73C213 16-bit stereo DAC connected to Atmel SSC ++ * ++ * Copyright (C) 2006 Atmel Norway ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA ++ * 02111-1307, USA. ++ * ++ * The full GNU General Public License is included in this ++ * distribution in the file called COPYING. ++ */ ++ ++/*#define DEBUG*/ ++ ++#include <linux/clk.h> ++#include <linux/err.h> ++#include <linux/delay.h> ++#include <linux/device.h> ++#include <linux/dma-mapping.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/kmod.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++ ++#include <sound/initval.h> ++#include <sound/driver.h> ++#include <sound/control.h> ++#include <sound/core.h> ++#include <sound/pcm.h> ++ ++#include <linux/ssc.h> ++ ++#include <linux/spi/spi.h> ++#include <linux/spi/at73c213.h> ++ ++#include <asm/io.h> ++#include <asm/processor.h> ++ ++#include "at73c213.h" ++ ++#define BITRATE_MIN 8000 /* hardware limit? */ ++#define BITRATE_TARGET CONFIG_SND_AT73C213_TARGET_BITRATE ++#define BITRATE_MAX 50000 /* hardware limit */ ++ ++/* initial (hardware reset) AT73C213 register values */ ++static unsigned char snd_at73c213_original_image[18] = ++{ ++ 0x00, /* 00 - CTRL */ ++ 0x05, /* 01 - LLIG */ ++ 0x05, /* 02 - RLIG */ ++ 0x08, /* 03 - LPMG */ ++ 0x08, /* 04 - RPMG */ ++ 0x00, /* 05 - LLOG */ ++ 0x00, /* 06 - RLOG */ ++ 0x22, /* 07 - OLC */ ++ 0x09, /* 08 - MC */ ++ 0x00, /* 09 - CSFC */ ++ 0x00, /* 0A - MISC */ ++ 0x00, /* 0B - */ ++ 0x00, /* 0C - PRECH */ ++ 0x05, /* 0D - AUXG */ ++ 0x00, /* 0E - */ ++ 0x00, /* 0F - */ ++ 0x00, /* 10 - RST */ ++ 0x00, /* 11 - PA_CTRL */ ++}; ++ ++/* SSC setup */ ++static struct ssc_mode ssc_at73c213 = ++{ ++ .mode = ATMEL_SSC_MODE_I2S_MASTER, ++ .data_length = 16, ++}; ++ ++/* chip-specific data */ ++struct snd_at73c213 { ++ struct snd_card *card; ++ struct snd_pcm *pcm; ++ struct snd_pcm_substream *substream; ++ int irq; ++ int period; ++ unsigned long bitrate; ++ struct clk *bitclk; ++ struct clk *dac_clk; ++ struct ssc_device *ssc; ++ struct spi_device *spi; ++ struct at73c213_board_info *info; ++ struct ssc_xfer_info ssc_xfer; ++ u8 spi_wbuffer[2]; ++ u8 spi_rbuffer[2]; ++ /* image of the SPI registers in AT73C213 */ ++ u8 image[18]; ++ spinlock_t lock; ++}; ++ ++#define get_chip(card) ((struct snd_at73c213 *)card->private_data) ++ ++static int ++snd_at73c213_write_reg(struct snd_at73c213 *chip, u8 reg, u8 val) ++{ ++ struct spi_message msg; ++ struct spi_transfer msg_xfer = { ++ .len = 2, ++ .cs_change = 0, ++ }; ++ ++ spi_message_init(&msg); ++ ++ chip->spi_wbuffer[0] = reg; ++ chip->spi_wbuffer[1] = val; ++ ++ msg_xfer.tx_buf = chip->spi_wbuffer; ++ msg_xfer.rx_buf = chip->spi_rbuffer; ++ spi_message_add_tail(&msg_xfer, &msg); ++ ++ return spi_sync(chip->spi, &msg); ++} ++ ++#define write_reg(_spi, reg, val) \ ++ do { \ ++ retval = snd_at73c213_write_reg(_spi, reg, val); \ ++ if (retval) \ ++ goto out; \ ++ } while (0) ++ ++static struct snd_pcm_hardware snd_at73c213_playback_hw = { ++ .info = SNDRV_PCM_INFO_INTERLEAVED | ++ SNDRV_PCM_INFO_BLOCK_TRANSFER, ++ .formats = SNDRV_PCM_FMTBIT_S16_BE, ++ .rates = SNDRV_PCM_RATE_CONTINUOUS, ++ .rate_min = 8000, /* overwritten by chip->bitrate */ ++ .rate_max = 50000, /* overwritten by chip->bitrate */ ++ .channels_min = 2, ++ .channels_max = 2, ++ .buffer_bytes_max = 64 * 1024 - 1, ++ .period_bytes_min = 512, ++ .period_bytes_max = 64 * 1024 - 1, ++ .periods_min = 4, ++ .periods_max = 1024, ++}; ++ ++/* ++ * calculate and set bitrate and divisions ++ */ ++static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip) ++{ ++ unsigned long ssc_rate = ssc_clk_get_rate(chip->ssc); ++ unsigned long dac_rate_new, ssc_div, status; ++ unsigned long ssc_div_max, ssc_div_min; ++ int max_tries, retval; ++ ++ /* We connect two clocks here, picking divisors so the I2S clocks ++ * out data at the same rate the DAC clocks it in ... and as close ++ * as practical to the desired target rate. ++ * ++ * The DAC master clock (MCLK) is programmable, and is either 256 ++ * or (not here) 384 times the I2S output clock (BCLK). ++ */ ++ ++ /* SSC clock / (bitrate * stereo * 16-bit) */ ++ ssc_div = ssc_rate / (BITRATE_TARGET * 2 * 16); ++ ssc_div_min = ssc_rate / (BITRATE_MAX * 2 * 16); ++ ssc_div_max = ssc_rate / (BITRATE_MIN * 2 * 16); ++ max_tries = (ssc_div_max - ssc_div_min) / 2; ++ ++ if ((ssc_div % 2) != 0) ++ ssc_div++; ++ if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) { ++ ssc_div -= 2; ++ if ((ssc_rate / (ssc_div * 2 * 16)) > BITRATE_MAX) { ++ return -ENXIO; ++ } ++ } ++ ++ /* search for a possible bitrate */ ++ do { ++ /* SSC clock / (ssc divider * 16-bit * stereo) */ ++ if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) ++ return -ENXIO; ++ ++ dac_rate_new = 8 * (ssc_rate / ssc_div); /* 256 / (2 * 16) = 8 */ ++ ++ status = clk_round_rate(chip->dac_clk, dac_rate_new); ++ if (status < 0) ++ return status; ++ ++ /* ignore difference smaller than 256 Hz */ ++ if ((status/256) == (dac_rate_new/256)) ++ goto set_rate; ++ ++ ssc_div += 2; ++ } while (--max_tries); ++ ++ /* not able to find a bitrate */ ++ return -ENXIO; ++ ++set_rate: ++ status = clk_set_rate(chip->dac_clk, status); ++ if (status < 0) ++ return status; ++ ++ ssc_at73c213.bauddiv = ssc_div; ++ retval = ssc_set_mode(chip->ssc, &ssc_at73c213); ++ if (retval) ++ return retval; ++ ++ /* SSC clock / (ssc divider * 16-bit * stereo) */ ++ chip->bitrate = ssc_rate / (ssc_div * 16 * 2); ++ ++ printk(KERN_INFO "at73c213: supported bitrate is %lu (%lu divider)\n", ++ chip->bitrate, ssc_div); ++ ++ return 0; ++} ++ ++/* open callback */ ++static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream) ++{ ++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream); ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ ++ snd_at73c213_playback_hw.rate_min = chip->bitrate; ++ snd_at73c213_playback_hw.rate_max = chip->bitrate; ++ runtime->hw = snd_at73c213_playback_hw; ++ chip->substream = substream; ++ ++ return 0; ++} ++ ++/* close callback */ ++static int snd_at73c213_pcm_close(struct snd_pcm_substream *substream) ++{ ++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream); ++ chip->substream = NULL; ++ return 0; ++} ++ ++/* hw_params callback */ ++static int snd_at73c213_pcm_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *hw_params) ++{ ++ return snd_pcm_lib_malloc_pages(substream, ++ params_buffer_bytes(hw_params)); ++} ++ ++/* hw_free callback */ ++static int snd_at73c213_pcm_hw_free(struct snd_pcm_substream *substream) ++{ ++ return snd_pcm_lib_free_pages(substream); ++} ++ ++/* prepare callback */ ++static int snd_at73c213_pcm_prepare(struct snd_pcm_substream *substream) ++{ ++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream); ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ int block_size; ++ ++ block_size = frames_to_bytes(runtime, runtime->period_size); ++ ++ chip->period = 0; ++ ++ /* Make sure that our data are actually readable by the SSC */ ++ dma_sync_single_for_device(&chip->spi->dev, ++ (long)runtime->dma_area, ++ block_size, DMA_TO_DEVICE); ++ dma_sync_single_for_device(&chip->spi->dev, ++ (long)runtime->dma_area + block_size, ++ block_size, DMA_TO_DEVICE); ++ ++ chip->ssc_xfer.data = (long)runtime->dma_area; ++ chip->ssc_xfer.data &= ~0xe0000000; ++ chip->ssc_xfer.len = runtime->period_size * 2; ++ chip->ssc_xfer.next_data = (long)runtime->dma_area + block_size; ++ chip->ssc_xfer.next_data &= ~0xe0000000; ++ chip->ssc_xfer.next_len = runtime->period_size * 2; ++ ssc_set_tx_buffers(chip->ssc, &chip->ssc_xfer); ++ ++ return 0; ++} ++ ++/* trigger callback */ ++static int snd_at73c213_pcm_trigger(struct snd_pcm_substream *substream, ++ int cmd) ++{ ++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream); ++ int retval = 0; ++ unsigned long flags = 0; ++ ++ spin_lock_irqsave(&chip->lock, flags); ++ ++ switch (cmd) { ++ case SNDRV_PCM_TRIGGER_START: ++ ssc_enable_int(chip->ssc, SSC_BIT(IER_ENDTX)); ++ ssc_enable_xfer(chip->ssc, 1, 0); ++ break; ++ case SNDRV_PCM_TRIGGER_STOP: ++ ssc_disable_xfer(chip->ssc, 1, 0); ++ ssc_disable_int(chip->ssc, SSC_BIT(IDR_ENDTX)); ++ break; ++ default: ++ printk(KERN_WARNING "at73c213: spurious command %x\n", cmd); ++ retval = -EINVAL; ++ break; ++ } ++ ++ spin_unlock_irqrestore(&chip->lock, flags); ++ ++ return retval; ++} ++ ++/* pointer callback */ ++static snd_pcm_uframes_t snd_at73c213_pcm_pointer(struct snd_pcm_substream *substream) ++{ ++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream); ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ snd_pcm_uframes_t pos; ++ unsigned long bytes; ++ ++ ssc_get_tx_buffers(chip->ssc, &chip->ssc_xfer); ++ bytes = chip->ssc_xfer.data - (unsigned long)runtime->dma_area; ++ ++ pos = bytes_to_frames(runtime, bytes); ++ if (pos >= runtime->buffer_size) ++ pos -= runtime->buffer_size; ++ ++ return pos; ++} ++ ++/* operators */ ++static struct snd_pcm_ops at73c213_playback_ops = { ++ .open = snd_at73c213_pcm_open, ++ .close = snd_at73c213_pcm_close, ++ .ioctl = snd_pcm_lib_ioctl, ++ .hw_params = snd_at73c213_pcm_hw_params, ++ .hw_free = snd_at73c213_pcm_hw_free, ++ .prepare = snd_at73c213_pcm_prepare, ++ .trigger = snd_at73c213_pcm_trigger, ++ .pointer = snd_at73c213_pcm_pointer, ++}; ++ ++/* free a pcm device */ ++static void snd_at73c213_pcm_free(struct snd_pcm *pcm) ++{ ++ struct snd_at73c213 *chip = snd_pcm_chip(pcm); ++ if (chip->pcm) { ++ snd_pcm_lib_preallocate_free_for_all(chip->pcm); ++ chip->pcm = NULL; ++ } ++} ++ ++/* create a new pcm device */ ++static int __devinit snd_at73c213_pcm_new(struct snd_at73c213 *chip, int device) ++{ ++ struct snd_pcm *pcm; ++ int retval; ++ ++ retval = snd_pcm_new(chip->card, chip->card->shortname, device, 1, 0, &pcm); ++ if (retval < 0) ++ return retval; ++ ++ pcm->private_data = chip; ++ pcm->private_free = snd_at73c213_pcm_free; ++ pcm->info_flags = SNDRV_PCM_INFO_BLOCK_TRANSFER; ++ strcpy(pcm->name, "at73c213"); ++ chip->pcm = pcm; ++ ++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &at73c213_playback_ops); ++ ++ /* TODO: why can I not use SNDRV_DMA_TYPE_DEV? */ ++ retval = snd_pcm_lib_preallocate_pages_for_all(chip->pcm, ++ SNDRV_DMA_TYPE_CONTINUOUS, ++ snd_dma_continuous_data(GFP_KERNEL), ++ 64 * 1024, 64 * 1024); ++ return 0; ++} ++ ++static irqreturn_t snd_at73c213_interrupt(int irq, void *dev_id) ++{ ++ struct snd_at73c213 *chip = dev_id; ++ struct snd_pcm_runtime *runtime = chip->substream->runtime; ++ u32 status; ++ int offset, next_period, block_size, mask, retval; ++ ++ spin_lock(&chip->lock); ++ ++ block_size = frames_to_bytes(runtime, runtime->period_size); ++ ++ retval = ssc_get_int_mask(chip->ssc, &status); ++ if (retval) ++ return retval; ++ ++ if (status & SSC_BIT(IMR_ENDTX)) { ++ chip->period++; ++ if (chip->period == runtime->periods) ++ chip->period = 0; ++ next_period = chip->period + 1; ++ if (next_period == runtime->periods) ++ next_period = 0; ++ ++ offset = block_size * next_period; ++ ++ /* make sure that our data are actually readable by the SSC */ ++ dma_sync_single_for_device(&chip->spi->dev, ++ (long)runtime->dma_area + offset, ++ block_size, DMA_TO_DEVICE); ++ chip->ssc_xfer.data = 0; /* only update next pointer */ ++ chip->ssc_xfer.next_data = (long)runtime->dma_area + offset; ++ chip->ssc_xfer.next_data &= ~0xe0000000; ++ chip->ssc_xfer.next_len = runtime->period_size * 2; ++ ssc_set_tx_buffers(chip->ssc, &chip->ssc_xfer); ++ } else { ++ printk(KERN_WARNING ++ "Spurious SSC interrupt, status = 0x%08lx\n", ++ (unsigned long)status); ++ ssc_disable_int(chip->ssc, status); ++ } ++ ++ ssc_get_int_mask(chip->ssc, &mask); ++ spin_unlock(&chip->lock); ++ ++ if (status & SSC_BIT(IMR_ENDTX)) ++ snd_pcm_period_elapsed(chip->substream); ++ ++ return IRQ_HANDLED; ++} ++ ++/* ++ * Mixer functions ++ */ ++#if 0 /* Function not in use */ ++static int snd_at73c213_mono_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ unsigned long mask = (kcontrol->private_value >> 16) & 0xff; ++ ++ uinfo->type = (mask == 1) ? ++ SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = mask; ++ ++ return 0; ++} ++#endif ++ ++static int snd_at73c213_mono_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol); ++ unsigned long flags; ++ int reg = kcontrol->private_value & 0xff; ++ int shift = (kcontrol->private_value >> 8) & 0xff; ++ int mask = (kcontrol->private_value >> 16) & 0xff; ++ int invert = (kcontrol->private_value >> 24) & 0xff; ++ ++ spin_lock_irqsave(&chip->lock, flags); ++ ++ ucontrol->value.integer.value[0] = (chip->image[reg] >> shift) & mask; ++ ++ if (invert) ++ ucontrol->value.integer.value[0] = ++ (mask - ucontrol->value.integer.value[0]); ++ ++ spin_unlock_irqrestore(&chip->lock, flags); ++ ++ return 0; ++} ++ ++static int snd_at73c213_mono_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol); ++ unsigned long flags; ++ int reg = kcontrol->private_value & 0xff; ++ int shift = (kcontrol->private_value >> 8) & 0xff; ++ int mask = (kcontrol->private_value >> 16) & 0xff; ++ int invert = (kcontrol->private_value >> 24) & 0xff; ++ int change, retval; ++ unsigned short val; ++ ++ val = (ucontrol->value.integer.value[0] & mask); ++ if (invert) ++ val = mask - val; ++ val <<= shift; ++ ++ spin_lock_irqsave(&chip->lock, flags); ++ ++ val = (chip->image[reg] & ~(mask << shift)) | val; ++ change = val != chip->image[reg]; ++ write_reg(chip, reg, val); ++ ++ chip->image[reg] = val; ++ ++ spin_unlock_irqrestore(&chip->lock, flags); ++ ++ return change; ++ ++out: ++ return retval; ++} ++ ++static int snd_at73c213_stereo_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ int mask = (kcontrol->private_value >> 24) & 0xFF; ++ ++ uinfo->type = mask == 1 ? ++ SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER; ++ uinfo->count = 2; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = mask; ++ ++ return 0; ++} ++ ++static int snd_at73c213_stereo_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol); ++ unsigned long flags; ++ int left_reg = kcontrol->private_value & 0xff; ++ int right_reg = (kcontrol->private_value >> 8) & 0xff; ++ int shift_left = (kcontrol->private_value >> 16) & 0x07; ++ int shift_right = (kcontrol->private_value >> 19) & 0x07; ++ int mask = (kcontrol->private_value >> 24) & 0xff; ++ int invert = (kcontrol->private_value >> 22) & 1; ++ ++ spin_lock_irqsave(&chip->lock, flags); ++ ++ ucontrol->value.integer.value[0] = ++ (chip->image[left_reg] >> shift_left) & mask; ++ ucontrol->value.integer.value[1] = ++ (chip->image[right_reg] >> shift_right) & mask; ++ ++ if (invert) { ++ ucontrol->value.integer.value[0] = ++ (mask - ucontrol->value.integer.value[0]); ++ ucontrol->value.integer.value[1] = ++ (mask - ucontrol->value.integer.value[1]); ++ } ++ ++ spin_unlock_irqrestore(&chip->lock, flags); ++ ++ return 0; ++} ++ ++static int snd_at73c213_stereo_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol); ++ unsigned long flags; ++ int left_reg = kcontrol->private_value & 0xff; ++ int right_reg = (kcontrol->private_value >> 8) & 0xff; ++ int shift_left = (kcontrol->private_value >> 16) & 0x07; ++ int shift_right = (kcontrol->private_value >> 19) & 0x07; ++ int mask = (kcontrol->private_value >> 24) & 0xff; ++ int invert = (kcontrol->private_value >> 22) & 1; ++ int change, retval; ++ unsigned short val1, val2; ++ ++ val1 = ucontrol->value.integer.value[0] & mask; ++ val2 = ucontrol->value.integer.value[1] & mask; ++ if (invert) { ++ val1 = mask - val1; ++ val2 = mask - val2; ++ } ++ val1 <<= shift_left; ++ val2 <<= shift_right; ++ ++ spin_lock_irqsave(&chip->lock, flags); ++ ++ val1 = (chip->image[left_reg] & ~(mask << shift_left)) | val1; ++ val2 = (chip->image[right_reg] & ~(mask << shift_right)) | val2; ++ change = val1 != chip->image[left_reg] || val2 != chip->image[right_reg]; ++ write_reg(chip, left_reg, val1); ++ write_reg(chip, right_reg, val2); ++ ++ chip->image[left_reg] = val1; ++ chip->image[right_reg] = val2; ++ ++ spin_unlock_irqrestore(&chip->lock, flags); ++ ++ return change; ++ ++out: ++ return retval; ++} ++ ++static int snd_at73c213_mono_switch_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = 1; ++ ++ return 0; ++} ++ ++static int snd_at73c213_mono_switch_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol); ++ unsigned long flags; ++ int reg = kcontrol->private_value & 0xff; ++ int shift = (kcontrol->private_value >> 8) & 0xff; ++ int invert = (kcontrol->private_value >> 24) & 0xff; ++ ++ spin_lock_irqsave(&chip->lock, flags); ++ ++ ucontrol->value.integer.value[0] = (chip->image[reg] >> shift) & 0x01; ++ ++ if (invert) ++ ucontrol->value.integer.value[0] = ++ (0x01 - ucontrol->value.integer.value[0]); ++ ++ spin_unlock_irqrestore(&chip->lock, flags); ++ ++ return 0; ++} ++ ++static int snd_at73c213_mono_switch_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol); ++ unsigned long flags; ++ int reg = kcontrol->private_value & 0xff; ++ int shift = (kcontrol->private_value >> 8) & 0xff; ++ int mask = (kcontrol->private_value >> 16) & 0xff; ++ int invert = (kcontrol->private_value >> 24) & 0xff; ++ int change, retval; ++ unsigned short val; ++ ++ if (ucontrol->value.integer.value[0]) ++ val = mask; ++ else ++ val = 0; ++ ++ if (invert) ++ val = mask - val; ++ val <<= shift; ++ ++ spin_lock_irqsave(&chip->lock, flags); ++ ++ val |= (chip->image[reg] & ~(mask << shift)); ++ change = val != chip->image[reg]; ++ ++ write_reg(chip, reg, val); ++ ++ chip->image[reg] = val; ++ ++ spin_unlock_irqrestore(&chip->lock, flags); ++ ++ return change; ++ ++out: ++ return retval; ++} ++ ++static int snd_at73c213_pa_volume_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = ((kcontrol->private_value >> 16) & 0xFF) - 1; ++ ++ return 0; ++} ++ ++static int snd_at73c213_line_capture_volume_info( ++ struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; ++ uinfo->count = 2; ++ uinfo->value.integer.min = 14; ++ uinfo->value.integer.max = 31; ++ ++ return 0; ++} ++ ++static int snd_at73c213_aux_capture_volume_info( ++ struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 14; ++ uinfo->value.integer.max = 31; ++ ++ return 0; ++} ++ ++#define AT73C213_MONO(xname, xindex, reg, shift, mask, invert) \ ++{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ ++ .info = snd_at73c213_mono_info, \ ++ .get = snd_at73c213_mono_get, .put = snd_at73c213_mono_put, \ ++ .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) } ++ ++#define AT73C213_MONO_SWITCH(xname, xindex, reg, shift, mask, invert) \ ++{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ ++ .info = snd_at73c213_mono_switch_info, \ ++ .get = snd_at73c213_mono_switch_get, .put = snd_at73c213_mono_switch_put, \ ++ .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) } ++ ++#define AT73C213_STEREO(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \ ++{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ ++ .info = snd_at73c213_stereo_info, \ ++ .get = snd_at73c213_stereo_get, .put = snd_at73c213_stereo_put, \ ++ .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | (shift_right << 19) | (mask << 24) | (invert << 22) } ++ ++static struct snd_kcontrol_new snd_at73c213_controls[] __devinitdata = { ++AT73C213_STEREO("Master Playback Volume", 0, DAC_LMPG, DAC_RMPG, 0, 0, 0x1F, 1), ++AT73C213_STEREO("Master Playback Switch", 0, DAC_LMPG, DAC_RMPG, 5, 5, 1, 1), ++AT73C213_STEREO("PCM Playback Volume", 0, DAC_LLOG, DAC_RLOG, 0, 0, 0x1F, 1), ++AT73C213_STEREO("PCM Playback Switch", 0, DAC_LLOG, DAC_RLOG, 5, 5, 1, 1), ++AT73C213_MONO_SWITCH("Mono PA Playback Switch", 0, DAC_CTRL, DAC_CTRL_ONPADRV, 0x01, 0), ++{ ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "PA Playback Volume", ++ .index = 0, ++ .info = snd_at73c213_pa_volume_info, ++ .get = snd_at73c213_mono_get, ++ .put = snd_at73c213_mono_put, ++ .private_value = PA_CTRL|(PA_CTRL_APAGAIN<<8)|(0x0F<<16)|(1<<24), ++}, ++AT73C213_MONO_SWITCH("PA High Gain Playback Switch", 0, PA_CTRL, PA_CTRL_APALP, 0x01, 1), ++AT73C213_MONO_SWITCH("PA Playback Switch", 0, PA_CTRL, PA_CTRL_APAON, 0x01, 0), ++{ ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "Aux Capture Volume", ++ .index = 0, ++ .info = snd_at73c213_aux_capture_volume_info, ++ .get = snd_at73c213_mono_get, ++ .put = snd_at73c213_mono_put, ++ .private_value = DAC_AUXG|(0<<8)|(0x1F<<16)|(1<<24), ++}, ++AT73C213_MONO_SWITCH("Aux Capture Switch", 0, DAC_CTRL, DAC_CTRL_ONAUXIN, 0x01, 0), ++{ ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "Line Capture Volume", ++ .index = 0, ++ .info = snd_at73c213_line_capture_volume_info, ++ .get = snd_at73c213_stereo_get, ++ .put = snd_at73c213_stereo_put, ++ .private_value = DAC_LLIG|(DAC_RLIG<<8)|(0<<16)|(0<<19)|(0x1F<<24)|(1<<22), ++}, ++AT73C213_MONO_SWITCH("Line Capture Switch", 0, DAC_CTRL, 0, 0x03, 0), ++}; ++ ++static int __devinit snd_at73c213_mixer(struct snd_at73c213 *chip) ++{ ++ struct snd_card *card; ++ int errval, idx; ++ ++ if (chip == NULL || chip->pcm == NULL) ++ return -EINVAL; ++ ++ card = chip->card; ++ ++ strcpy(card->mixername, chip->pcm->name); ++ ++ for (idx = 0; idx < ARRAY_SIZE(snd_at73c213_controls); idx++) { ++ if ((errval = snd_ctl_add(card, ++ snd_ctl_new1(&snd_at73c213_controls[idx], ++ chip))) < 0) { ++ goto cleanup; ++ } ++ } ++ ++ return 0; ++ ++cleanup: ++ for (idx = 1; idx < ARRAY_SIZE(snd_at73c213_controls) + 1; idx++) { ++ struct snd_kcontrol *kctl; ++ kctl = snd_ctl_find_numid(card, idx); ++ if (kctl) ++ snd_ctl_remove(card, kctl); ++ } ++ return errval; ++} ++ ++/* ++ * Device functions ++ */ ++static int snd_at73c213_chip_init(struct snd_at73c213 *chip) ++{ ++ int retval; ++ unsigned char dac_ctrl = 0; ++ ++ retval = snd_at73c213_set_bitrate(chip); ++ if (retval) ++ goto out; ++ ++ /* enable DAC master clock */ ++ clk_enable(chip->dac_clk); ++ ++ /* initialize at73c213 on SPI bus */ ++ write_reg(chip, DAC_RST, 0x04); ++ msleep(1); ++ write_reg(chip, DAC_RST, 0x03); ++ ++ /* precharge everything */ ++ write_reg(chip, DAC_PRECH, 0xFF); ++ write_reg(chip, PA_CTRL, (1<<PA_CTRL_APAPRECH)); ++ write_reg(chip, DAC_CTRL, (1<<DAC_CTRL_ONLNOL)|(1<<DAC_CTRL_ONLNOR)); ++ ++ msleep(50); ++ ++ /* stop precharging PA */ ++ write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0F); ++ chip->image[PA_CTRL] = (1<<PA_CTRL_APALP)|0x0F; ++ ++ msleep(450); ++ ++ /* stop precharging DAC, turn on master power */ ++ write_reg(chip, DAC_PRECH, (1<<DAC_PRECH_ONMSTR)); ++ chip->image[DAC_PRECH] = (1<<DAC_PRECH_ONMSTR); ++ ++ msleep(1); ++ ++ /* turn on DAC */ ++ dac_ctrl = (1<<DAC_CTRL_ONDACL)|(1<<DAC_CTRL_ONDACR)| ++ (1<<DAC_CTRL_ONLNOL)|(1<<DAC_CTRL_ONLNOR); ++ ++ write_reg(chip, DAC_CTRL, dac_ctrl); ++ chip->image[DAC_CTRL] = dac_ctrl; ++ ++ /* mute sound */ ++ write_reg(chip, DAC_LMPG, 0x3F); ++ chip->image[DAC_LMPG] = 0x3F; ++ write_reg(chip, DAC_RMPG, 0x3F); ++ chip->image[DAC_RMPG] = 0x3F; ++ write_reg(chip, DAC_LLOG, 0x3F); ++ chip->image[DAC_LLOG] = 0x3F; ++ write_reg(chip, DAC_RLOG, 0x3F); ++ chip->image[DAC_RLOG] = 0x3F; ++ write_reg(chip, DAC_LLIG, 0x11); ++ chip->image[DAC_LLIG] = 0x11; ++ write_reg(chip, DAC_RLIG, 0x11); ++ chip->image[DAC_RLIG] = 0x11; ++ write_reg(chip, DAC_AUXG, 0x11); ++ chip->image[DAC_AUXG] = 0x11; ++ ++ /* enable I2S clock */ ++ retval = ssc_enable(chip->ssc, 1, 0); ++out: ++ return retval; ++} ++ ++static int snd_at73c213_dev_free(struct snd_device *device) ++{ ++ struct snd_at73c213 *chip = device->device_data; ++ ++ ssc_disable(chip->ssc, 1, 0); ++ if (chip->irq >= 0) { ++ free_irq(chip->irq, chip); ++ chip->irq = -1; ++ } ++ ssc_free(chip->ssc); ++ ++ return 0; ++} ++ ++static int __devinit snd_at73c213_init(struct snd_card *card, ++ struct spi_device *spi) ++{ ++ static struct snd_device_ops ops = { ++ .dev_free = snd_at73c213_dev_free, ++ }; ++ struct snd_at73c213 *chip = get_chip(card); ++ int irq, retval; ++ ++ irq = ssc_to_irq(chip->ssc); ++ if (irq < 0) ++ return irq; ++ ++ spin_lock_init(&chip->lock); ++ chip->card = card; ++ chip->irq = -1; ++ ++ retval = -ENOMEM; ++ ++ retval = spi_setup(chip->spi); ++ if (retval) ++ goto cleanup; ++ ++ retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip); ++ if (retval) { ++ snd_printk("unable to request irq %d\n", irq); ++ goto cleanup; ++ } ++ chip->irq = irq; ++ ++ memcpy(&chip->image, &snd_at73c213_original_image, ++ sizeof(snd_at73c213_original_image)); ++ ++ retval = snd_at73c213_chip_init(chip); ++ if (retval) ++ goto cleanup; ++ ++ retval = snd_at73c213_pcm_new(chip, 0); ++ if (retval) ++ goto cleanup; ++ ++ retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); ++ if (retval) ++ goto cleanup; ++ ++ retval = snd_at73c213_mixer(chip); ++ if (retval) ++ goto cleanup; ++ ++ snd_card_set_dev(card, &spi->dev); ++ ++ return retval; ++ ++cleanup: ++ if (!list_empty(&card->devices)) ++ snd_device_free(card, chip); ++ if (chip->pcm) ++ dev_dbg(&spi->dev, "FIXME: howto free pcm?\n"); ++ if (chip->irq >= 0) { ++ free_irq(chip->irq, chip); ++ chip->irq = -1; ++ } ++ return retval; ++} ++ ++static int snd_at73c213_probe(struct spi_device *spi) ++{ ++ struct at73c213_board_info *info; ++ struct clk *dac_clk; ++ struct snd_card *card; ++ struct snd_at73c213 *chip; ++ int retval; ++ char id[16]; ++ ++ info = spi->dev.platform_data; ++ if (!info) { ++ dev_dbg(&spi->dev, "no platform_data\n"); ++ return -ENXIO; ++ } ++ ++ dac_clk = clk_get(NULL, info->dac_clk); ++ if (IS_ERR(dac_clk)) { ++ dev_dbg(&spi->dev, "unable to get DAC clk '%s'\n", ++ info->dac_clk); ++ return (PTR_ERR(dac_clk)); ++ } ++ ++ retval = -ENOMEM; ++ ++ /* allocate "card" using some unused identifiers */ ++ snprintf(id, sizeof id, "at73c213_%d", info->i2s_dev); ++ card = snd_card_new(-1, id, THIS_MODULE, sizeof(struct snd_at73c213)); ++ if (!card) ++ goto cleanup_card; ++ ++ chip = card->private_data; ++ chip->spi = spi; ++ chip->info = info; ++ chip->dac_clk = dac_clk; ++ ++ chip->ssc = ssc_request(info->i2s_dev); ++ if (IS_ERR(chip->ssc)) { ++ dev_dbg(&spi->dev, "could not get ssc%d device\n", ++ info->i2s_dev); ++ retval = (PTR_ERR(chip->ssc)); ++ goto cleanup; ++ } ++ ++ retval = snd_at73c213_init(card, spi); ++ if (retval) ++ goto cleanup; ++ ++ strcpy(card->driver, "at73c213"); ++ strcpy(card->shortname, info->shortname); ++ sprintf(card->longname, "%s on irq %d", card->shortname, chip->irq); ++ ++ retval = snd_card_register(card); ++ if (retval) ++ goto cleanup; ++ ++ dev_set_drvdata(&spi->dev, card); ++ return 0; ++ ++cleanup: ++ if (IS_ERR(chip->ssc)) ++ ssc_free(chip->ssc); ++ if (card) ++ snd_card_free(card); ++cleanup_card: ++ if (dac_clk) ++ clk_put(dac_clk); ++ return retval; ++} ++ ++static int __devexit snd_at73c213_remove(struct spi_device *spi) ++{ ++ struct snd_card *card = dev_get_drvdata(&spi->dev); ++ struct snd_at73c213 *chip = card->private_data; ++ int retval; ++ ++ /* Stop playback */ ++ ssc_disable(chip->ssc, 1, 0); ++ ++ /* Mute sound */ ++ write_reg(chip, DAC_LMPG, 0x3F); ++ chip->image[DAC_LMPG] = 0x3F; ++ write_reg(chip, DAC_RMPG, 0x3F); ++ chip->image[DAC_RMPG] = 0x3F; ++ write_reg(chip, DAC_LLOG, 0x3F); ++ chip->image[DAC_LLOG] = 0x3F; ++ write_reg(chip, DAC_RLOG, 0x3F); ++ chip->image[DAC_RLOG] = 0x3F; ++ write_reg(chip, DAC_LLIG, 0x11); ++ chip->image[DAC_LLIG] = 0x11; ++ write_reg(chip, DAC_RLIG, 0x11); ++ chip->image[DAC_RLIG] = 0x11; ++ write_reg(chip, DAC_AUXG, 0x11); ++ chip->image[DAC_AUXG] = 0x11; ++ ++ /* Turn off PA */ ++ write_reg(chip, PA_CTRL, (chip->image[PA_CTRL]|0x0F)); ++ chip->image[PA_CTRL] |= 0x0F; ++ msleep(10); ++ write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0F); ++ chip->image[PA_CTRL] = (1<<PA_CTRL_APALP)|0x0F; ++ ++ /* Turn off external DAC */ ++ write_reg(chip, DAC_CTRL, 0x0C); ++ chip->image[DAC_CTRL] = 0x0C; ++ msleep(2); ++ write_reg(chip, DAC_CTRL, 0x00); ++ chip->image[DAC_CTRL] = 0x00; ++ ++ /* Turn off master power */ ++ write_reg(chip, DAC_PRECH, 0x00); ++ chip->image[DAC_PRECH] = 0x00; ++ ++ /* Stop DAC master clock */ ++ if (chip->dac_clk) { ++ clk_disable(chip->dac_clk); ++ clk_put(chip->dac_clk); ++ } ++ ++out: ++ if (card) { ++ snd_card_free(card); ++ dev_set_drvdata(&spi->dev, NULL); ++ } ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++static int snd_at73c213_suspend(struct spi_device *spi, pm_message_t msg) ++{ ++ struct snd_card *card = dev_get_drvdata(&spi->dev); ++ struct snd_at73c213 *chip = card->private_data; ++ ++ ssc_disable(chip->ssc, 1, 0); ++ clk_disable(chip->dac_clk); ++ ++ return 0; ++} ++ ++static int snd_at73c213_resume(struct spi_device *spi) ++{ ++ struct snd_card *card = dev_get_drvdata(&spi->dev); ++ struct snd_at73c213 *chip = card->private_data; ++ ++ clk_enable(chip->dac_clk); ++ ssc_enable(chip->ssc, 1, 0); ++ ++ return 0; ++} ++#endif /* CONFIG_PM */ ++ ++/* Driver core initialization */ ++static struct spi_driver at73c213_driver = { ++ .driver = { ++ .name = "at73c213", ++ }, ++ .probe = snd_at73c213_probe, ++#ifdef CONFIG_PM ++ .suspend = snd_at73c213_suspend, ++ .resume = snd_at73c213_resume, ++#endif ++ .remove = __devexit_p(snd_at73c213_remove), ++}; ++ ++static int __init at73c213_init(void) ++{ ++ return spi_register_driver(&at73c213_driver); ++} ++module_init(at73c213_init); ++ ++static void __exit at73c213_exit(void) ++{ ++ spi_unregister_driver(&at73c213_driver); ++} ++module_exit(at73c213_exit); ++ ++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); ++MODULE_DESCRIPTION("Sound driver for AT73C213 with Atmel SSC"); ++MODULE_LICENSE("GPL"); +diff --git a/sound/spi/at73c213.h b/sound/spi/at73c213.h +new file mode 100644 +index 0000000..fd8b372 +--- /dev/null ++++ b/sound/spi/at73c213.h +@@ -0,0 +1,119 @@ ++/* ++ * Driver for the AT73C213 16-bit stereo DAC on Atmel ATSTK1000 ++ * ++ * Copyright (C) 2006 - 2007 Atmel Corporation ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA ++ * 02111-1307, USA. ++ * ++ * The full GNU General Public License is included in this ++ * distribution in the file called COPYING. ++ */ ++ ++#ifndef _SND_AT73C213_H ++#define _SND_AT73C213_H ++ ++/* DAC control register */ ++#define DAC_CTRL 0x00 ++#define DAC_CTRL_ONPADRV 7 ++#define DAC_CTRL_ONAUXIN 6 ++#define DAC_CTRL_ONDACR 5 ++#define DAC_CTRL_ONDACL 4 ++#define DAC_CTRL_ONLNOR 3 ++#define DAC_CTRL_ONLNOL 2 ++#define DAC_CTRL_ONLNIR 1 ++#define DAC_CTRL_ONLNIL 0 ++ ++/* DAC left line in gain register */ ++#define DAC_LLIG 0x01 ++#define DAC_LLIG_LLIG 0 ++ ++/* DAC right line in gain register */ ++#define DAC_RLIG 0x02 ++#define DAC_RLIG_RLIG 0 ++ ++/* DAC Left Master Playback Gain Register */ ++#define DAC_LMPG 0x03 ++#define DAC_LMPG_LMPG 0 ++ ++/* DAC Right Master Playback Gain Register */ ++#define DAC_RMPG 0x04 ++#define DAC_RMPG_RMPG 0 ++ ++/* DAC Left Line Out Gain Register */ ++#define DAC_LLOG 0x05 ++#define DAC_LLOG_LLOG 0 ++ ++/* DAC Right Line Out Gain Register */ ++#define DAC_RLOG 0x06 ++#define DAC_RLOG_RLOG 0 ++ ++/* DAC Output Level Control Register */ ++#define DAC_OLC 0x07 ++#define DAC_OLC_RSHORT 7 ++#define DAC_OLC_ROLC 4 ++#define DAC_OLC_LSHORT 3 ++#define DAC_OLC_LOLC 0 ++ ++/* DAC Mixer Control Register */ ++#define DAC_MC 0x08 ++#define DAC_MC_INVR 5 ++#define DAC_MC_INVL 4 ++#define DAC_MC_RMSMIN2 3 ++#define DAC_MC_RMSMIN1 2 ++#define DAC_MC_LMSMIN2 1 ++#define DAC_MC_LMSMIN1 0 ++ ++/* DAC Clock and Sampling Frequency Control Register */ ++#define DAC_CSFC 0x09 ++#define DAC_CSFC_OVRSEL 4 ++ ++/* DAC Miscellaneous Register */ ++#define DAC_MISC 0x0A ++#define DAC_MISC_VCMCAPSEL 7 ++#define DAC_MISC_DINTSEL 4 ++#define DAC_MISC_DITHEN 3 ++#define DAC_MISC_DEEMPEN 2 ++#define DAC_MISC_NBITS 0 ++ ++/* DAC Precharge Control Register */ ++#define DAC_PRECH 0x0C ++#define DAC_PRECH_PRCHGPDRV 7 ++#define DAC_PRECH_PRCHGAUX1 6 ++#define DAC_PRECH_PRCHGLNOR 5 ++#define DAC_PRECH_PRCHGLNOL 4 ++#define DAC_PRECH_PRCHGLNIR 3 ++#define DAC_PRECH_PRCHGLNIL 2 ++#define DAC_PRECH_PRCHG 1 ++#define DAC_PRECH_ONMSTR 0 ++ ++/* DAC Auxiliary Input Gain Control Register */ ++#define DAC_AUXG 0x0D ++#define DAC_AUXG_AUXG 0 ++ ++/* DAC Reset Register */ ++#define DAC_RST 0x10 ++#define DAC_RST_RESMASK 2 ++#define DAC_RST_RESFILZ 1 ++#define DAC_RST_RSTZ 0 ++ ++/* Power Amplifier Control Register */ ++#define PA_CTRL 0x11 ++#define PA_CTRL_APAON 6 ++#define PA_CTRL_APAPRECH 5 ++#define PA_CTRL_APALP 4 ++#define PA_CTRL_APAGAIN 0 ++ ++#endif /* _SND_AT73C213_H */ diff --git a/toolchain/kernel-headers/linux-2.6.21.5-006-wait-for-async-scanned-block-devices.patch b/toolchain/kernel-headers/linux-2.6.21.5-006-wait-for-async-scanned-block-devices.patch new file mode 100644 index 000000000..910b43ad9 --- /dev/null +++ b/toolchain/kernel-headers/linux-2.6.21.5-006-wait-for-async-scanned-block-devices.patch @@ -0,0 +1,55 @@ +diff --git a/init/do_mounts.c b/init/do_mounts.c +index 46fe407..efc134c 100644 +--- a/init/do_mounts.c ++++ b/init/do_mounts.c +@@ -25,6 +25,7 @@ int __initdata rd_doload; /* 1 = load RAM disk, 0 = don't load */ + int root_mountflags = MS_RDONLY | MS_SILENT; + char * __initdata root_device_name; + static char __initdata saved_root_name[64]; ++int __initdata root_wait; + + dev_t ROOT_DEV; + +@@ -216,6 +217,14 @@ static int __init root_dev_setup(char *line) + + __setup("root=", root_dev_setup); + ++static int __init rootwait_setup(char *line) ++{ ++ root_wait = simple_strtol(line,NULL,0); ++ return 1; ++} ++ ++__setup("rootwait=", rootwait_setup); ++ + static char * __initdata root_mount_data; + static int __init root_data_setup(char *str) + { +@@ -438,11 +447,24 @@ void __init prepare_namespace(void) + root_device_name += 5; + } + +- is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR; +- + if (initrd_load()) + goto out; + ++ /* wait for any asynchronous scanning to complete */ ++ if ((ROOT_DEV == 0) && root_wait) { ++ printk(KERN_INFO "Waiting for root device %s...\n", ++ saved_root_name); ++ do { ++ while (driver_probe_done() != 0) ++ msleep(100); ++ ROOT_DEV = name_to_dev_t(saved_root_name); ++ if (ROOT_DEV == 0) ++ msleep(100); ++ } while (ROOT_DEV == 0); ++ } ++ ++ is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR; ++ + if (is_floppy && rd_doload && rd_load_disk(0)) + ROOT_DEV = Root_RAM0; + + diff --git a/toolchain/kernel-headers/linux-2.6.21.5-007-ipmisensors-20070314-1214.patch b/toolchain/kernel-headers/linux-2.6.21.5-007-ipmisensors-20070314-1214.patch new file mode 100644 index 000000000..aca57c37b --- /dev/null +++ b/toolchain/kernel-headers/linux-2.6.21.5-007-ipmisensors-20070314-1214.patch @@ -0,0 +1,1914 @@ +diff -rduNp linux-2.6.20.3.orig/drivers/char/ipmi/ipmi_msghandler.c linux-2.6.20.3/drivers/char/ipmi/ipmi_msghandler.c +--- linux-2.6.20.3.orig/drivers/char/ipmi/ipmi_msghandler.c 2007-03-13 19:27:08.000000000 +0100 ++++ linux-2.6.20.3/drivers/char/ipmi/ipmi_msghandler.c 2007-03-14 14:23:02.000000000 +0100 +@@ -1954,6 +1954,24 @@ static void remove_proc_entries(ipmi_smi + #endif /* CONFIG_PROC_FS */ + } + ++/* ++ * Retrieves the bmc_device struct for a given ipmi interface number (or NULL if none). ++ */ ++struct device *ipmi_get_bmcdevice(int if_num) ++{ ++ ipmi_smi_t intf; ++ mutex_lock(&ipmi_interfaces_mutex); ++ list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { ++ if (intf->intf_num == if_num){ ++ mutex_unlock(&ipmi_interfaces_mutex); ++ return &intf->bmc->dev->dev; ++ } ++ } ++ mutex_unlock(&ipmi_interfaces_mutex); ++ ++ return NULL; ++} ++ + static int __find_bmc_guid(struct device *dev, void *data) + { + unsigned char *id = data; +@@ -4183,3 +4201,4 @@ EXPORT_SYMBOL(ipmi_get_my_LUN); + EXPORT_SYMBOL(ipmi_smi_add_proc_entry); + EXPORT_SYMBOL(ipmi_user_set_run_to_completion); + EXPORT_SYMBOL(ipmi_free_recv_msg); ++EXPORT_SYMBOL(ipmi_get_bmcdevice); +diff -rduNp linux-2.6.20.3.orig/drivers/hwmon/Kconfig linux-2.6.20.3/drivers/hwmon/Kconfig +--- linux-2.6.20.3.orig/drivers/hwmon/Kconfig 2007-03-13 19:27:08.000000000 +0100 ++++ linux-2.6.20.3/drivers/hwmon/Kconfig 2007-03-14 14:23:02.000000000 +0100 +@@ -218,6 +218,16 @@ config SENSORS_GL520SM + This driver can also be built as a module. If so, the module + will be called gl520sm. + ++config SENSORS_IPMI ++ tristate "IPMI Hardware Monitoring Support" ++ depends on HWMON && IPMI_HANDLER && EXPERIMENTAL ++ help ++ If you say yes here you get support for sensors monitored by ++ an IPMI baseboard management controller (BMC). ++ ++ This driver can also be built as a module. If so, the module ++ will be called ipmisensors. ++ + config SENSORS_IT87 + tristate "ITE IT87xx and compatibles" + depends on HWMON && I2C +diff -rduNp linux-2.6.20.3.orig/drivers/hwmon/Makefile linux-2.6.20.3/drivers/hwmon/Makefile +--- linux-2.6.20.3.orig/drivers/hwmon/Makefile 2007-03-13 19:27:08.000000000 +0100 ++++ linux-2.6.20.3/drivers/hwmon/Makefile 2007-03-14 14:23:02.000000000 +0100 +@@ -28,6 +28,7 @@ obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o + obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o + obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o + obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o ++obj-$(CONFIG_SENSORS_IPMI) += ipmisensors.o + obj-$(CONFIG_SENSORS_IT87) += it87.o + obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o + obj-$(CONFIG_SENSORS_LM63) += lm63.o +diff -rduNp linux-2.6.20.3.orig/drivers/hwmon/ipmisensors.c linux-2.6.20.3/drivers/hwmon/ipmisensors.c +--- linux-2.6.20.3.orig/drivers/hwmon/ipmisensors.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.20.3/drivers/hwmon/ipmisensors.c 2007-03-14 14:44:42.000000000 +0100 +@@ -0,0 +1,1552 @@ ++/* ++ * ipmisensors.c - lm-sensors/hwmon interface to IPMI sensors. ++ * ++ * Copyright (C) 2004-2006 Yani Ioannou <yani.ioannou@gmail.com> ++ * ++ * Adapted from bmcsensors (lm-sensors for linux 2.4) ++ * bmcsensors (C) Mark D. Studebaker <mdsxyz123@yahoo.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/param.h> ++#include <linux/hwmon.h> ++#include <linux/list.h> ++#include <linux/slab.h> ++#include <linux/device.h> ++#include <linux/hwmon.h> ++ ++#include "ipmisensors.h" ++ ++/****** Function Prototypes ******/ ++static void ipmisensors_send_message(struct ipmisensors_bmc_data *bmc, ++ long msgid, struct kernel_ipmi_msg *msg); ++static void ipmisensors_reserve_sdr(struct ipmisensors_bmc_data *bmc); ++static void ipmisensors_get_sdr(struct ipmisensors_bmc_data *bmc, u16 res_id, ++ u16 record, u8 offset); ++static void ipmisensors_set_sensor_threshold(struct ipmisensors_bmc_data *bmc, ++ u8 number, int value, ++ int lim_index); ++static void ipmisensors_get_reading(struct ipmisensors_bmc_data *bmc, ++ struct sdrdata *sdr); ++static void ipmisensors_msg_handler(struct ipmi_recv_msg *msg, ++ void *user_msg_data); ++static int ipmisensors_intf_registered(int ipmi_intf); ++static int ipmisensors_bmc_registered(struct device *bmc); ++static void ipmisensors_register_bmc(int ipmi_intf, struct ipmi_addr *address); ++static void ipmisensors_unregister_bmc(int ipmi_intf); ++static void ipmisensors_unregister_bmc_all(void); ++static void ipmisensors_new_smi(int if_num, struct device *dev); ++static void ipmisensors_smi_gone(int if_num); ++static void ipmisensors_update_bmc(struct work_struct *); ++static void ipmisensors_cleanup(void); ++ ++/****** Static Vars ******/ ++ ++/* set when module is being removed */ ++static int cleanup = 0; ++ ++/* ipmisensors driver data */ ++static struct ipmisensors_data driver_data = { ++ .driver_name = "bmc", ++ .bmc_data = LIST_HEAD_INIT(driver_data.bmc_data), ++ .interfaces = 0, ++ .smi_watcher = { ++ .owner = THIS_MODULE, ++ .new_smi = ipmisensors_new_smi, ++ .smi_gone = ipmisensors_smi_gone, ++ }, ++ .ipmi_hndlrs = { ++ .ipmi_recv_hndl = ipmisensors_msg_handler, ++ }, ++}; ++ ++/* sensor refresh workqueue */ ++static struct workqueue_struct *ipmisensors_workqueue; ++ ++/****** SDR List Functions ******/ ++/** ++ * Creates a new sdrdata struct, or returns NULL if insufficient memory. ++ */ ++static struct sdrdata *ipmisensors_new_sdr(void) ++{ ++ struct sdrdata *sdr; ++ ++ sdr = kmem_cache_alloc(driver_data.sdrdata_cache, GFP_ATOMIC); ++ if (sdr) { ++ memset(sdr, 0, sizeof(struct sdrdata)); ++ } else { ++ printk(KERN_ERR ++ "ipmisensors: Couldn't allocate memory for new SDR\n"); ++ } ++ ++ return sdr; ++} ++ ++/** ++ * Adds the given sdrdata struct to the given bmc's SDR list. ++ * ++ * @bmc: the bmc to send the message to. ++ */ ++static inline void ipmisensors_add_sdr(struct ipmisensors_bmc_data *bmc, ++ struct sdrdata *sdr) ++{ ++ list_add(&sdr->list, &bmc->sdrs); ++ printk(KERN_DEBUG ++ "ipmisensors: SDR %d: type 0x%02x (%s)\n", ++ bmc->sdr_count, sdr->stype, sdr->id); ++ bmc->sdr_count++; ++} ++ ++/** ++ * Cleanup the sdr list for the given BMC. ++ * ++ * @bmc: the bmc to send the message to. ++ */ ++static void ipmisensors_sdr_cleanup(struct ipmisensors_bmc_data *bmc) ++{ ++ struct sdrdata *cursor, *next; ++ ++ /* find and free each sdr data struct */ ++ list_for_each_entry_safe(cursor, next, &bmc->sdrs, list) { ++ device_remove_file(bmc->dev, &cursor->attr.dev_attr); ++ device_remove_file(bmc->dev, &cursor->attr_min.dev_attr); ++ device_remove_file(bmc->dev, &cursor->attr_max.dev_attr); ++ device_remove_file(bmc->dev, &cursor->attr_label.dev_attr); ++ ++ kfree(cursor->attr_name); ++ kfree(cursor->attr_max_name); ++ kfree(cursor->attr_min_name); ++ kfree(cursor->attr_label_name); ++ ++ list_del(&cursor->list); ++ kmem_cache_free(driver_data.sdrdata_cache, cursor); ++ } ++} ++ ++/* worker function for workqueue ipmisensors_workqueue */ ++static void ipmisensors_update_bmc(struct work_struct *work) ++{ ++ struct ipmisensors_bmc_data *bmc = container_of(work, struct ipmisensors_bmc_data, update_work.work); ++ ++ /* don't start an update cycle if one already in progress */ ++ if (bmc->state != STATE_READING) { ++ struct sdrdata *cursor, *next; ++ bmc->state = STATE_READING; ++ printk(KERN_DEBUG "ipmisensors: starting update\n"); ++ ++ /* init semaphore to 1 for update cycle */ ++ sema_init(&bmc->update_semaphore, 1); ++ ++ /* update each sdr reading */ ++ list_for_each_entry_safe(cursor, next, &bmc->sdrs, list) { ++ ipmisensors_get_reading(bmc, cursor); ++ } ++ } ++ ++ /* wait for readings (need timeout?) */ ++ down_interruptible(&bmc->update_semaphore); ++ ++ printk(KERN_DEBUG "ipmisensors: update complete\n"); ++ ++ bmc->state = STATE_DONE; ++ ++ /* if the module isn't cleaning up, schedule another update */ ++ if (!cleanup) ++ queue_delayed_work(ipmisensors_workqueue, &bmc->update_work, ++ bmc->update_period * HZ); ++} ++ ++/****** IPMI Message Sending ******/ ++ ++/** ++ * Send a message to the IPMI BMC ++ * ++ * @bmc: the bmc to send the message to. ++ * @msgid: the message id to use. ++ * @msg: the ipmi message structure. ++ */ ++static void ipmisensors_send_message(struct ipmisensors_bmc_data *bmc, ++ long msgid, struct kernel_ipmi_msg *msg) ++{ ++ if (msg->data == NULL) ++ printk(KERN_DEBUG "ipmisensors: Send 0x%x\n", msg->cmd); ++ else ++ printk(KERN_DEBUG "ipmisensors: Send 0x%x 0x%x 0x%x\n", ++ msg->cmd, msg->data[0], msg->data[1]); ++ ++ /* This should be ipmi_request, but Corey had to remove ++ * that due to it being unused at the moment, as soon as ++ * this makes it into the kernel we should request it be re-instated. ++ */ ++ ipmi_request_settime(bmc->user, &bmc->address, msgid, msg, bmc, 0, ++ -1, 0); ++} ++ ++/** ++ * Compose and send a "reserve SDR" message ++ * ++ * @bmc: the bmc to send the message to. ++ */ ++static void ipmisensors_reserve_sdr(struct ipmisensors_bmc_data *bmc) ++{ ++ bmc->tx_message.netfn = IPMI_NETFN_STORAGE_REQUEST; ++ bmc->tx_message.cmd = IPMI_RESERVE_SDR; ++ bmc->tx_message.data_len = 0; ++ bmc->tx_message.data = NULL; ++ ++ ipmisensors_send_message(bmc, bmc->msgid++, &bmc->tx_message); ++} ++ ++/** ++ * Componse and send a "get SDR" message ++ * ++ * @bmc: the bmc to send the message to. ++ * @res_id: ++ * @record: ++ * @offset: ++ */ ++static void ipmisensors_get_sdr(struct ipmisensors_bmc_data *bmc, u16 res_id, ++ u16 record, u8 offset) ++{ ++ printk(KERN_DEBUG "ipmisensors: Get SDR 0x%x 0x%x 0x%x\n", ++ res_id, record, offset); ++ bmc->tx_message.netfn = IPMI_NETFN_STORAGE_REQUEST; ++ bmc->tx_message.cmd = IPMI_GET_SDR; ++ bmc->tx_message.data_len = 6; ++ bmc->tx_message.data = bmc->tx_msg_data; ++ bmc->tx_msg_data[0] = res_id & 0xff; ++ bmc->tx_msg_data[1] = res_id >> 8; ++ bmc->tx_msg_data[2] = record & 0xff; ++ bmc->tx_msg_data[3] = record >> 8; ++ bmc->tx_msg_data[4] = offset; ++ bmc->tx_msg_data[5] = bmc->ipmi_sdr_partial_size; ++ ++ ipmisensors_send_message(bmc, bmc->msgid++, &bmc->tx_message); ++} ++ ++/** ++ * Compose and send a "set sensor threshold" message ++ * ++ * @bmc: the bmc to send the message to. ++ * @id: the ipmi id number of the sensor. ++ * @value: the new value for the threshold. ++ * @lim_index: the index in the lim[] array for which this value applies. ++ */ ++static void ipmisensors_set_sensor_threshold(struct ipmisensors_bmc_data *bmc, ++ u8 number, int value, ++ int lim_index) ++{ ++ int i; ++ ++ printk(KERN_DEBUG "ipmisensors: Set SDR Threshold %d %d %d\n", ++ number, value, lim_index); ++ bmc->tx_message.netfn = IPMI_NETFN_STORAGE_REQUEST; ++ bmc->tx_message.cmd = IPMI_SET_SENSOR_THRESHOLD; ++ bmc->tx_message.data_len = 8; ++ bmc->tx_message.data = bmc->tx_msg_data; ++ bmc->tx_msg_data[0] = number & 0xff; ++ bmc->tx_msg_data[1] = 0x01 << lim_index; ++ ++ if (lim_index > 5 || lim_index < 0) { ++ printk(KERN_INFO ++ "ipmisensors: Error - ipmisensors_set_sensor_threshold given invalid lim_index\n"); ++ return; ++ } ++ ++ for (i = 2; i < 8; i++) ++ bmc->tx_msg_data[i] = 0x00; ++ ++ bmc->tx_msg_data[lim_index] = value && 0xff; ++ ++ ipmisensors_send_message(bmc, bmc->msgid++, &bmc->tx_message); ++} ++ ++/** ++ * Compose and send a "get sensor reading" message for the given sdr. ++ * ++ * @bmc: the bmc to send the message to. ++ * @sdr: the sdr of the sensor to get the reading for. ++ */ ++static void ipmisensors_get_reading(struct ipmisensors_bmc_data *bmc, ++ struct sdrdata *sdr) ++{ ++ bmc->tx_message.netfn = IPMI_NETFN_SENSOR_EVENT_REQUEST; ++ bmc->tx_message.cmd = IPMI_GET_SENSOR_STATE_READING; ++ bmc->tx_message.data_len = 1; ++ bmc->tx_message.data = bmc->tx_msg_data; ++ bmc->tx_msg_data[0] = sdr->number; ++ bmc->current_sdr = sdr; ++ ++ ipmisensors_send_message(bmc, bmc->msgid++, &bmc->tx_message); ++ down_interruptible(&bmc->update_semaphore); ++} ++ ++/****** IPMI Message Receiving ******/ ++ ++/** ++ * Process an sensor reading response message. ++ * ++ * @bmc: the bmc the message is from ++ * @msg: the IPMI SDR response message ++ */ ++static void ipmisensors_rcv_reading_msg(struct ipmisensors_bmc_data *bmc, ++ struct kernel_ipmi_msg *msg) ++{ ++ struct sdrdata *sdr = bmc->current_sdr; ++ ++ if (sdr == NULL) { ++ printk(KERN_ERR ++ "ipmisensors: Error ipmisensors_rcv_reading with NULL sdr\n"); ++ return; ++ } ++ ++ sdr->reading = msg->data[1]; ++ sdr->status = msg->data[2]; ++ sdr->thresholds = msg->data[3]; ++ ++ printk(KERN_DEBUG "ipmisensors: sensor %d (type %d) reading %d\n", ++ sdr->number, sdr->stype, msg->data[1]); ++ ++ up(&bmc->update_semaphore); ++} ++ ++/** ++ * Unpack based on string type, convert to normal, null terminate. ++ */ ++static void ipmisensors_sprintf(u8 * to, u8 * from, u8 type, u8 length) ++{ ++ static const u8 *bcdplus = "0123456789 -.:,_"; ++ int i; ++ ++ switch (type) { ++ case 0: /* unicode */ ++ for (i = 0; i < length; i++) ++ *to++ = (*from++ & 0x7f); ++ *to = 0; ++ break; ++ case 1: /* BCD Plus */ ++ for (i = 0; i < length; i++) ++ *to++ = bcdplus[*from++ & 0x0f]; ++ *to = 0; ++ break; ++ case 2: /* packed ascii *//* if not a mult. of 3 this will run over */ ++ for (i = 0; i < length; i += 3) { ++ *to++ = *from & 0x3f; ++ *to++ = *from >> 6 | ((*(from+1) & 0xf) << 2); ++ from++; ++ *to++ = *from >> 4 | ((*(from+1) & 0x3) << 4); ++ from++; ++ *to++ = (*from++ >> 2) & 0x3f; ++ } ++ *to = 0; ++ break; ++ case 3: /* normal */ ++ if (length > 1) ++ memcpy(to, from, length); ++ to[length] = 0; ++ break; ++ } ++} ++ ++/* IPMI V1.5 Section 30 */ ++static const int exps[] = ++ { 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000 }; ++ ++/* Return 0 for fan, 2 for temp, 3 for voltage ++ We could make it variable based on the accuracy (= log10(m * 10**k2)); ++ this would work for /proc output, however libsensors resolution ++ is statically set in lib/chips.c */ ++static int decplaces(struct sdrdata *sd) ++{ ++ switch (sd->stype) { ++ case STYPE_TEMP: ++ return 2; ++ case STYPE_CURR: ++ case STYPE_VOLT: ++ return 3; ++ case STYPE_FAN: ++ default: ++ return 0; ++ } ++} ++ ++/* convert a raw value to a reading. IMPI V1.5 Section 30 */ ++static long conv_val(int value, struct sdrdata *sd) ++{ ++ u8 k1, k2; ++ long r; ++ ++ r = value * sd->m; ++ k1 = sd->k & 0x0f; ++ k2 = sd->k >> 4; ++ if (k1 < 8) ++ r += sd->b * exps[k1]; ++ else ++ r += sd->b / exps[16 - k1]; ++ r *= exps[decplaces(sd)]; ++ if (k2 < 8) { ++ if (sd->linear != 7) ++ r *= exps[k2]; ++ else ++ /* this will always truncate to 0: r = 1 / (exps[k2] * r); */ ++ r = 0; ++ } else { ++ if (sd->linear != 7) ++ r /= exps[16 - k2]; ++ else { ++ if (r != 0) ++ /* 1 / x * 10 ** (-m) == 10 ** m / x */ ++ r = exps[16 - k2] / r; ++ else ++ r = 0; ++ } ++ } ++ ++ return r; ++} ++ ++static const char *threshold_text[] = { ++ "upper non-recoverable threshold", ++ "upper critical threshold", ++ "upper non-critical threshold", ++ "lower non-recoverable threshold", ++ "lower critical threshold", ++ "lower non-critical threshold", ++ "positive-going hysteresis", ++ "negative-going hysteresis" /* unused */ ++}; ++ ++/* select two out of the 8 possible readable thresholds, and place indexes into the limits ++ array into lim1 and lim2. Set writable flags */ ++static void ipmisensors_select_thresholds(struct sdrdata *sd) ++{ ++ u8 capab = sd->capab; ++ u16 mask = sd->thresh_mask; ++ int tmp; ++ ++ sd->lim1 = -1; ++ sd->lim2 = -1; ++ sd->lim1_write = 0; ++ sd->lim2_write = 0; ++ ++ if (((capab & 0x0c) == 0x04) || /* readable thresholds ? */ ++ ((capab & 0x0c) == 0x08)) { ++ /* select upper threshold */ ++ if (mask & 0x10) { /* upper crit */ ++ sd->lim1 = 1; ++ if ((capab & 0x0c) == 0x08 && (mask & 0x1000)) ++ sd->lim1_write = 1; ++ } else if (mask & 0x20) { /* upper non-recov */ ++ sd->lim1 = 0; ++ if ((capab & 0x0c) == 0x08 && (mask & 0x2000)) ++ sd->lim1_write = 1; ++ } else if (mask & 0x08) { /* upper non-crit */ ++ sd->lim1 = 2; ++ if ((capab & 0x0c) == 0x08 && (mask & 0x0800)) ++ sd->lim1_write = 1; ++ } ++ ++ /* select lower threshold */ ++ if ((((capab & 0x30) == 0x10) || /* readable ? */ ++ ((capab & 0x30) == 0x20)) && /* pos hyst */ ++ sd->stype == STYPE_TEMP) ++ sd->lim2 = 6; ++ else if (mask & 0x02) { /* lower crit */ ++ sd->lim2 = 4; ++ if ((capab & 0x0c) == 0x08 && (mask & 0x0200)) ++ sd->lim2_write = 1; ++ } else if (mask & 0x04) { /* lower non-recov */ ++ sd->lim2 = 3; ++ if ((capab & 0x0c) == 0x08 && (mask & 0x0400)) ++ sd->lim2_write = 1; ++ } else if (mask & 0x01) { /* lower non-crit */ ++ sd->lim2 = 5; ++ if ((capab & 0x0c) == 0x08 && (mask & 0x0100)) ++ sd->lim2_write = 1; ++ } ++ } ++ ++ /* swap lim1/lim2 if m < 0 or function is 1/x (but not both!) */ ++ if ((sd->m < 0 && sd->linear != 7) || (sd->m >= 0 && sd->linear == 7)) { ++ tmp = sd->lim1; ++ sd->lim1 = sd->lim2; ++ sd->lim2 = tmp; ++ } ++ ++ if (sd->lim1 >= 0) ++ printk(KERN_INFO "ipmisensors: using %s for upper limit\n", ++ threshold_text[sd->lim1]); ++ else ++ printk(KERN_DEBUG "ipmisensors: no readable upper limit\n"); ++ ++ if (sd->lim2 >= 0) ++ printk(KERN_INFO "ipmisensors: using %s for lower limit\n", ++ threshold_text[sd->lim2]); ++ else ++ printk(KERN_DEBUG "ipmisensors: no readable lower limit\n"); ++} ++ ++/************* sysfs callback functions *********/ ++static ssize_t show_update_period(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct ipmisensors_bmc_device_attribute *aattr = ++ to_ipmisensors_bmc_dev_attr(attr); ++ ++ return snprintf(buf, 20, "%d\n", aattr->bmc->update_period); ++} ++ ++static ssize_t store_update_period(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct ipmisensors_bmc_device_attribute *aattr = ++ to_ipmisensors_bmc_dev_attr(attr); ++ ++ aattr->bmc->update_period = simple_strtoul(buf, NULL, 10);; ++ return count; ++}; ++ ++static ssize_t show_sensor(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ struct ipmisensors_device_attribute *sattr = ++ to_ipmisensors_dev_attr(attr); ++ return snprintf(buf, 20, "%ld\n", ++ conv_val(sattr->sdr->reading, sattr->sdr)); ++} ++ ++static ssize_t show_sensor_max(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ long max = 0; ++ struct ipmisensors_device_attribute *sattr = ++ to_ipmisensors_dev_attr(attr); ++ ++ if (sattr->sdr->lim1 >= 0) ++ max = conv_val(sattr->sdr->limits[sattr->sdr->lim1], ++ sattr->sdr); ++ return snprintf(buf, 20, "%ld\n", max); ++} ++ ++static ssize_t show_sensor_min(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ long min = 0; ++ struct ipmisensors_device_attribute *sattr = ++ to_ipmisensors_dev_attr(attr); ++ ++ if (sattr->sdr->lim2 >= 0) ++ min = conv_val(sattr->sdr->limits[sattr->sdr->lim2], ++ sattr->sdr); ++ return snprintf(buf, 20, "%ld\n", min); ++}; ++ ++static ssize_t show_sensor_label(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ u8 label[SDR_MAX_UNPACKED_ID_LENGTH]; ++ struct ipmisensors_device_attribute *sattr = ++ to_ipmisensors_dev_attr(attr); ++ ++ ipmisensors_sprintf(label, sattr->sdr->id, sattr->sdr->string_type, ++ sattr->sdr->id_length); ++ return snprintf(buf, 20, "%s\n", label); ++}; ++ ++static ssize_t store_sensor_max(struct device *dev, ++ struct device_attribute *attr, const char *buf, ++ size_t count) ++{ ++ long val = simple_strtoul(buf, NULL, 10); ++ struct ipmisensors_device_attribute *sattr = ++ to_ipmisensors_dev_attr(attr); ++ printk(KERN_DEBUG "ipmisensors: set max on sensor #%d to %ld", ++ sattr->sdr->number, val); ++ ipmisensors_set_sensor_threshold(sattr->sdr->bmc, sattr->sdr->number, ++ val, sattr->sdr->lim1); ++ return count; ++}; ++ ++static ssize_t store_sensor_min(struct device *dev, ++ struct device_attribute *attr, const char *buf, ++ size_t count) ++{ ++ long val = simple_strtoul(buf, NULL, 10); ++ struct ipmisensors_device_attribute *sattr = ++ to_ipmisensors_dev_attr(attr); ++ printk(KERN_DEBUG "ipmisensors: set min on sensor #%d to %ld", ++ sattr->sdr->number, val); ++ ipmisensors_set_sensor_threshold(sattr->sdr->bmc, sattr->sdr->number, ++ val, sattr->sdr->lim2); ++ return count; ++}; ++ ++static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ struct ipmisensors_bmc_device_attribute *aattr = ++ to_ipmisensors_bmc_dev_attr(attr); ++ return snprintf(buf, 20, "%d\n", aattr->bmc->alarms); ++}; ++ ++static ssize_t show_name(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ return snprintf(buf, 20, "%s\n", driver_data.driver_name); ++}; ++ ++/* work function to build the sysfs entries using the ipmi sdrs */ ++static void ipmisensors_build_sysfs(struct work_struct *work) ++{ ++ int temps = 0, volts = 0, currs = 0, fans = 0; ++ struct sdrdata *cursor, *next; ++ struct ipmisensors_bmc_data *bmc = container_of(work, struct ipmisensors_bmc_data, sysfs_work); ++ ++ /* find and create entries for each sdr data struct */ ++ list_for_each_entry_safe(cursor, next, &bmc->sdrs, list) { ++ u8 id[SDR_MAX_UNPACKED_ID_LENGTH]; ++ ++ cursor->attr_name = ++ (char *)kmalloc(sizeof(char) * MAX_FILENAME_LENGTH, ++ GFP_KERNEL); ++ cursor->attr_max_name = ++ (char *)kmalloc(sizeof(char) * MAX_FILENAME_LENGTH, ++ GFP_KERNEL); ++ cursor->attr_min_name = ++ (char *)kmalloc(sizeof(char) * MAX_FILENAME_LENGTH, ++ GFP_KERNEL); ++ ++ if (cursor->id_length > 0) { ++ cursor->attr_label_name = ++ (char *)kmalloc(sizeof(char) * MAX_FILENAME_LENGTH, ++ GFP_KERNEL); ++ ++ if (cursor->attr_label_name == NULL) { ++ printk(KERN_INFO ++ "ipmisensors: Out of memory (kmalloc failed)"); ++ kfree(cursor->attr_name); ++ kfree(cursor->attr_max_name); ++ kfree(cursor->attr_min_name); ++ return; ++ } ++ } ++ ++ if (cursor->attr_name == NULL || cursor->attr_max_name == NULL ++ || cursor->attr_min_name == NULL ++ || cursor->attr_label_name == NULL) { ++ printk(KERN_INFO ++ "ipmisensors: Out of memory (kmalloc failed)"); ++ kfree(cursor->attr_name); ++ kfree(cursor->attr_max_name); ++ kfree(cursor->attr_min_name); ++ kfree(cursor->attr_label_name); ++ return; ++ } ++ ++ switch (cursor->stype) { ++ case (STYPE_TEMP): ++ /* create the name of the sensor */ ++ snprintf(cursor->attr_name, MAX_FILENAME_LENGTH, ++ "temp%d_input", ++temps); ++ /* create min, max attributes */ ++ snprintf(cursor->attr_max_name, MAX_FILENAME_LENGTH, ++ "temp%d_max", temps); ++ snprintf(cursor->attr_min_name, MAX_FILENAME_LENGTH, ++ "temp%d_min", temps); ++ /* create the label of the sensor */ ++ snprintf(cursor->attr_label_name, MAX_FILENAME_LENGTH, ++ "temp%d_label", temps); ++ break; ++ case (STYPE_VOLT): ++ /* create the name of the sensor */ ++ snprintf(cursor->attr_name, MAX_FILENAME_LENGTH, ++ "in%d_input", ++volts); ++ /* create min, max attributes */ ++ snprintf(cursor->attr_max_name, MAX_FILENAME_LENGTH, ++ "in%d_max", volts); ++ snprintf(cursor->attr_min_name, MAX_FILENAME_LENGTH, ++ "in%d_min", volts); ++ /* create the label of the sensor */ ++ snprintf(cursor->attr_label_name, MAX_FILENAME_LENGTH, ++ "in%d_label", volts); ++ break; ++ case (STYPE_CURR): ++ /* create the name of the sensor */ ++ snprintf(cursor->attr_name, MAX_FILENAME_LENGTH, ++ "curr%d_input", ++currs); ++ /* create min, max attributes */ ++ sprintf(cursor->attr_max_name, "curr%d_max", currs); ++ sprintf(cursor->attr_min_name, "curr%d_min", currs); ++ /* create the label of the sensor */ ++ snprintf(cursor->attr_label_name, MAX_FILENAME_LENGTH, ++ "curr%d_label", currs); ++ break; ++ case (STYPE_FAN): ++ /* create the name of the sensor */ ++ snprintf(cursor->attr_name, MAX_FILENAME_LENGTH, ++ "fan%d_input", ++fans); ++ /* create min, max attributes */ ++ sprintf(cursor->attr_max_name, "fan%d_max", fans); ++ sprintf(cursor->attr_min_name, "fan%d_min", fans); ++ /* create the label of the sensor */ ++ snprintf(cursor->attr_label_name, MAX_FILENAME_LENGTH, ++ "fan%d_label", fans); ++ break; ++ default: ++ printk(KERN_INFO "ipmisensors: unkown sensor type\n"); ++ continue; ++ } ++ ++ cursor->attr.dev_attr.attr.name = cursor->attr_name; ++ cursor->attr.dev_attr.attr.mode = S_IRUGO; ++ cursor->attr.dev_attr.attr.owner = THIS_MODULE; ++ cursor->attr.dev_attr.show = show_sensor; ++ cursor->attr.dev_attr.store = NULL; ++ cursor->attr.sdr = cursor; ++ ++ cursor->attr_min.dev_attr.attr.name = cursor->attr_min_name; ++ cursor->attr_min.dev_attr.attr.owner = THIS_MODULE; ++ cursor->attr_min.dev_attr.show = show_sensor_min; ++ cursor->attr_min.sdr = cursor; ++ ++ if (cursor->lim2_write) { ++ printk(KERN_INFO ++ "ipmisensors: You have a writable sensor threshold! Send me an e-mail at <yani.ioannou@gmail.com>.\n"); ++ cursor->attr_min.dev_attr.store = store_sensor_min; ++ cursor->attr_min.dev_attr.attr.mode = S_IWUSR | S_IRUGO; ++ } else { ++ cursor->attr_min.dev_attr.store = NULL; ++ cursor->attr_min.dev_attr.attr.mode = S_IRUGO; ++ } ++ ++ cursor->attr_max.dev_attr.attr.name = cursor->attr_max_name; ++ cursor->attr_max.dev_attr.attr.owner = THIS_MODULE; ++ cursor->attr_max.dev_attr.show = show_sensor_max; ++ cursor->attr_max.sdr = cursor; ++ ++ if (cursor->lim1_write) { ++ printk(KERN_INFO ++ "ipmisensors: You have a writable sensor threshold! Send me an e-mail at <yani.ioannou@gmail.com>.\n"); ++ cursor->attr_max.dev_attr.store = store_sensor_max; ++ cursor->attr_max.dev_attr.attr.mode = S_IWUSR | S_IRUGO; ++ } else { ++ cursor->attr_max.dev_attr.store = NULL; ++ cursor->attr_max.dev_attr.attr.mode = S_IRUGO; ++ } ++ ++ if (cursor->id_length > 0) { ++ cursor->attr_label.dev_attr.attr.name = ++ cursor->attr_label_name; ++ cursor->attr_label.dev_attr.attr.mode = S_IRUGO; ++ cursor->attr_label.dev_attr.attr.owner = THIS_MODULE; ++ cursor->attr_label.dev_attr.show = show_sensor_label; ++ cursor->attr_label.dev_attr.store = NULL; ++ cursor->attr_label.sdr = cursor; ++ } ++ ++ printk(KERN_INFO ++ "ipmisensors: registering sensor %d: (type 0x%.2x) " ++ "(fmt=%d; m=%d; b=%d; k1=%d; k2=%d; cap=0x%.2x; mask=0x%.4x)\n", ++ cursor->number, cursor->stype, cursor->format, cursor->m, ++ cursor->b, cursor->k & 0xf, cursor->k >> 4, ++ cursor->capab, cursor->thresh_mask); ++ ++ if (cursor->id_length > 0) { ++ ipmisensors_sprintf(id, cursor->id, cursor->string_type, ++ cursor->id_length); ++ switch (cursor->stype) { ++ case (STYPE_TEMP): ++ printk(KERN_INFO ++ "ipmisensors: sensors.conf: label temp%d \"%s\"\n", ++ temps, id); ++ break; ++ case (STYPE_VOLT): ++ printk(KERN_INFO ++ "ipmisensors: sensors.conf: label in%d \"%s\"\n", ++ volts, id); ++ break; ++ case (STYPE_CURR): ++ printk(KERN_INFO ++ "ipmisensors: sensors.conf: label curr%d \"%s\"\n", ++ currs, id); ++ break; ++ case (STYPE_FAN): ++ printk(KERN_INFO ++ "ipmisensors: sensors.conf: label fan%d \"%s\"\n", ++ fans, id); ++ break; ++ } ++ } ++ ++ ipmisensors_select_thresholds(cursor); ++ ++ if (cursor->linear != 0 && cursor->linear != 7) { ++ printk(KERN_INFO ++ "ipmisensors: sensor %d: nonlinear function 0x%.2x unsupported, expect bad results\n", ++ cursor->number, cursor->linear); ++ } ++ ++ if ((cursor->format & 0x03) == 0x02) { ++ printk(KERN_INFO ++ "ipmisensors: sensor %d: 1's complement format unsupported, expect bad results\n", ++ cursor->number); ++ } else if ((cursor->format & 0x03) == 0x03) { ++ printk(KERN_INFO ++ "ipmisensors: sensor %d: threshold sensor only, no readings available", ++ cursor->number); ++ } ++ ++ if (cursor->lim1_write || cursor->lim2_write) ++ cursor->attr.dev_attr.attr.mode = 0644; ++ else ++ cursor->attr.dev_attr.attr.mode = 0444; ++ ++ if (device_create_file(bmc->dev, &cursor->attr.dev_attr) < 0 ++ || device_create_file(bmc->dev, ++ &cursor->attr_min.dev_attr) < 0 ++ || device_create_file(bmc->dev, ++ &cursor->attr_max.dev_attr) < 0 ++ || (cursor->id_length > ++ 0 ? device_create_file(bmc->dev, ++ &cursor->attr_label.dev_attr) < ++ 0 : 0) ++ ) { ++ printk(KERN_INFO ++ "ipmisensors: sysfs file creation failed for SDR %d (%s).\n", ++ cursor->number, cursor->id); ++ kfree(cursor->attr_name); ++ kfree(cursor->attr_max_name); ++ kfree(cursor->attr_min_name); ++ kfree(cursor->attr_label_name); ++ return; ++ } ++ } ++ ++ bmc->alarms_attr.dev_attr.attr.name = "alarms"; ++ bmc->alarms_attr.dev_attr.attr.mode = S_IRUGO; ++ bmc->alarms_attr.dev_attr.attr.owner = THIS_MODULE; ++ bmc->alarms_attr.dev_attr.show = show_alarms; ++ bmc->alarms_attr.dev_attr.store = NULL; ++ bmc->alarms_attr.bmc = bmc; ++ ++ if (device_create_file(bmc->dev, &bmc->alarms_attr.dev_attr) < 0) { ++ printk(KERN_INFO ++ "ipmisensors: Failed to create sysfs entry 'alarms'"); ++ return; ++ } ++ ++ bmc->name_attr.attr.name = "name"; ++ bmc->name_attr.attr.mode = S_IRUGO; ++ bmc->name_attr.attr.owner = THIS_MODULE; ++ bmc->name_attr.show = show_name; ++ ++ if (device_create_file(bmc->dev, &bmc->name_attr) < 0) { ++ printk(KERN_INFO ++ "ipmisensors: Failed to create sysfs entry 'name'"); ++ return; ++ } ++ ++ bmc->update_attr.dev_attr.attr.name = "update_period"; ++ bmc->update_attr.dev_attr.attr.mode = S_IWUSR | S_IRUGO; ++ bmc->update_attr.dev_attr.attr.owner = THIS_MODULE; ++ bmc->update_attr.dev_attr.show = show_update_period; ++ bmc->update_attr.dev_attr.store = store_update_period; ++ bmc->update_attr.bmc = bmc; ++ ++ if (device_create_file(bmc->dev, &bmc->update_attr.dev_attr) < 0) { ++ printk(KERN_INFO ++ "ipmisensors: Failed to create sysfs entry 'update_period'"); ++ return; ++ } ++ ++ printk(KERN_INFO ++ "ipmisensors: registered %d temp, %d volt, %d current, %d fan sensors\n", ++ temps, volts, currs, fans); ++ ++ /* This completes the initialization. We can now kickoff the ++ * periodic update of the bmc sensor's values by scheduling ++ * the first work. ++ */ ++ queue_work(ipmisensors_workqueue, &bmc->update_work.work); ++ ++} ++ ++/** ++ * Process an SDR response message, save the SDRs we like in the sdr ++ * list for the given BMC. ++ * ++ * @bmc: the bmc the message is from ++ * @msg: the IPMI SDR response message ++ */ ++static void ipmisensors_rcv_sdr_msg(struct ipmisensors_bmc_data *bmc, ++ struct kernel_ipmi_msg *msg) ++{ ++ u16 record; ++ int type; ++ int stype; ++ int id_length; ++ int i; ++ int ipmi_ver = 0; ++ unsigned char *data; ++ u8 id[SDR_MAX_UNPACKED_ID_LENGTH]; ++ struct sdrdata *sdr; ++ ++ if (msg->data[0] != 0) { ++ /* cut request in half and try again */ ++ bmc->ipmi_sdr_partial_size /= 2; ++ if (bmc->ipmi_sdr_partial_size < 8) { ++ printk(KERN_INFO ++ "ipmisensors: IPMI buffers too small, giving up\n"); ++ bmc->state = STATE_DONE; ++ return; ++ } ++ printk(KERN_DEBUG ++ "ipmisensors: Reducing SDR request size to %d\n", ++ bmc->ipmi_sdr_partial_size); ++ ++ ipmisensors_get_sdr(bmc, 0, 0, 0); ++ bmc->state = STATE_SDR; ++ return; ++ } ++ if (bmc->ipmi_sdr_partial_size < IPMI_SDR_SIZE) { ++ if (bmc->rx_msg_data_offset == 0) { ++ memcpy(bmc->rx_msg_data, msg->data, ++ bmc->ipmi_sdr_partial_size + 3); ++ bmc->rx_msg_data_offset = ++ bmc->ipmi_sdr_partial_size + 3; ++ } else { ++ memcpy(bmc->rx_msg_data + bmc->rx_msg_data_offset, ++ msg->data + 3, bmc->ipmi_sdr_partial_size); ++ bmc->rx_msg_data_offset += bmc->ipmi_sdr_partial_size; ++ } ++ if (bmc->rx_msg_data_offset > bmc->rx_msg_data[7] + 7) { ++ /* got last chunk */ ++ bmc->rx_msg_data_offset = 0; ++ data = bmc->rx_msg_data; ++ } else { ++ /* get more */ ++ record = ++ (bmc->rx_msg_data[4] << 8) | bmc->rx_msg_data[3]; ++ ipmisensors_get_sdr(bmc, bmc->resid, record, ++ bmc->rx_msg_data_offset - 3); ++ bmc->state = STATE_SDR; ++ return; ++ } ++ } else { ++ /* got it in one chunk */ ++ data = msg->data; ++ } ++ ++ bmc->nextrecord = (data[2] << 8) | data[1]; ++ ++ /* If the ipmi version is 0.9 we have to remap some things. ++ * Yes this is very ugly, but we aren't the ones who ++ * implemented an incomplete spec! ++ */ ++ ipmi_ver = data[5]; ++ ++ type = data[6]; ++ /* known SDR type */ ++ if (type == 1 || type == 2) { ++ stype = data[(ipmi_ver == 0x90 ? 16 : 15)]; ++ /* known sensor type */ ++ if (stype <= STYPE_MAX) { ++ if (data[(ipmi_ver == 0x90 ? 17 : 16)] != 0x01) { ++ if (type == 1) ++ ipmisensors_sprintf(id, &data[51], ++ data[50] >> 6, ++ data[50] & 0x1f); ++ else ++ ipmisensors_sprintf(id, ++ &data[(ipmi_ver == ++ 0x90 ? 30 : ++ 35)], ++ data[(ipmi_ver == ++ 0x90 ? 29 : ++ 34)] >> 6, ++ data[(ipmi_ver == ++ 0x90 ? 29 : ++ 34)] & 0x1f); ++ printk(KERN_INFO ++ "ipmisensors: skipping non-threshold sensor \"%s\"\n", ++ id); ++ } else { ++ /* add entry to sdrd table */ ++ sdr = ipmisensors_new_sdr(); ++ if (!sdr) { ++ printk(KERN_ERR ++ "ipmisensors: could not allocate memory for new SDR"); ++ return; ++ } ++ sdr->bmc = bmc; ++ sdr->stype = stype; ++ sdr->number = data[10]; ++ sdr->capab = data[(ipmi_ver == 0x90 ? 15 : 14)]; ++ sdr->thresh_mask = ++ (((u16) data[(ipmi_ver == 0x90 ? 21 : 22)]) ++ << 8) | data[21]; ++ if (type == 1) { ++ sdr->format = ++ data[(ipmi_ver == ++ 0x90 ? 22 : 24)] >> 6; ++ sdr->linear = ++ data[(ipmi_ver == ++ 0x90 ? 25 : 26)] & 0x7f; ++ sdr->m = ++ data[(ipmi_ver == 0x90 ? 26 : 27)]; ++ sdr->m |= ((u16) ++ (data ++ [(ipmi_ver == ++ 0x90 ? 27 : 28)] ++ & 0xc0)) << 2; ++ if (sdr->m & 0x0200) { ++ /* sign extend */ ++ sdr->m |= 0xfc00; ++ } ++ sdr->b = ++ data[(ipmi_ver == 0x90 ? 28 : 29)]; ++ sdr->b |= ((u16) ++ (data ++ [(ipmi_ver == ++ 0x90 ? 29 : 30)] ++ & 0xc0)) << 2; ++ if (sdr->b & 0x0200) { ++ /* sign extend */ ++ sdr->b |= 0xfc00; ++ } ++ sdr->k = ++ data[(ipmi_ver == 0x90 ? 31 : 32)]; ++ sdr->nominal = ++ data[(ipmi_ver == 0x90 ? 33 : 34)]; ++ for (i = 0; i < SDR_LIMITS; i++) { ++ /* assume readable */ ++ sdr->limits[i] = ++ data[(ipmi_ver == ++ 0x90 ? 40 : 39) + i]; ++ } ++ sdr->string_type = data[50] >> 6; ++ id_length = data[50] & 0x1f; ++ memcpy(sdr->id, &data[51], id_length); ++ sdr->id_length = id_length; ++ } else { ++ sdr->m = 1; ++ sdr->b = 0; ++ sdr->k = 0; ++ sdr->string_type = ++ data[(ipmi_ver == ++ 0x90 ? 29 : 34)] >> 6; ++ id_length = data[34] & 0x1f; ++ if (id_length > 0) { ++ memcpy(sdr->id, ++ &data[(ipmi_ver == ++ 0x90 ? 30 : 35)], ++ id_length); ++ } ++ sdr->id_length = id_length; ++ /* limits?? */ ++ if (ipmi_ver == 0x90) { ++ memcpy(sdr->id, ++ &data[30], id_length); ++ sdr->id_length = id_length; ++ } ++ } ++ ipmisensors_add_sdr(bmc, sdr); ++ } ++ } ++ /* peek at the other SDR types */ ++ } else if (type == 0x10 || type == 0x11 || type == 0x12) { ++ ipmisensors_sprintf(id, data + 19, data[18] >> 6, ++ data[18] & 0x1f); ++ if (type == 0x10) { ++ printk(KERN_INFO ++ "ipmisensors: Generic Device acc=0x%x; slv=0x%x; lun=0x%x; type=0x%x; \"%s\"\n", ++ data[8], data[9], data[10], data[13], id); ++ } else if (type == 0x11) { ++ printk(KERN_INFO ++ "ipmisensors: FRU Device acc=0x%x; slv=0x%x; log=0x%x; ch=0x%x; type=0x%x; \"%s\"\n", ++ data[8], data[9], data[10], data[11], data[13], ++ id); ++ } else { ++ printk(KERN_INFO ++ "ipmisensors: Mgmt Ctllr Device slv=0x%x; \"%s\"\n", ++ data[8], id); ++ } ++ } else if (type == 0x14) { ++ printk(KERN_INFO ++ "ipmisensors: Message Channel Info Records:\n"); ++ for (i = 0; i < 8; i++) { ++ printk(KERN_INFO "ipmisensors: Channel %d info 0x%x\n", ++ i, data[9 + i]); ++ } ++ } else { ++ printk(KERN_INFO "ipmisensors: Skipping SDR type 0x%x\n", type); ++ } ++ if (ipmi_ver != 0x90) { ++ if (bmc->nextrecord >= 6224) { ++ /*YJ stop sensor scan on poweredge 1750 */ ++ bmc->nextrecord = 0xffff; ++ } ++ } ++ ++ if (bmc->nextrecord == 0xFFFF) { ++ if (bmc->sdr_count == 0) { ++ printk(KERN_INFO ++ "ipmisensors: No recognized sensors found.\n"); ++ bmc->state = STATE_DONE; ++ } else { ++ printk(KERN_INFO "ipmisensors: all sensors detected\n"); ++ bmc->state = STATE_SYSTABLE; ++ ++ /* Schedule sysfs build/registration work */ ++ INIT_WORK(&bmc->sysfs_work, ipmisensors_build_sysfs); ++ queue_work(ipmisensors_workqueue, &bmc->sysfs_work); ++ } ++ } else { ++ ipmisensors_get_sdr(bmc, 0, bmc->nextrecord, 0); ++ bmc->state = STATE_SDR; ++ } ++} ++ ++/** ++ * Process incoming messages based on internal state ++ * ++ * @bmc: the bmc the message is from. ++ * @msg: the ipmi message to process. ++ */ ++static void ipmisensors_rcv_msg(struct ipmisensors_bmc_data *bmc, ++ struct kernel_ipmi_msg *msg) ++{ ++ switch (bmc->state) { ++ case STATE_INIT: ++ case STATE_RESERVE: ++ bmc->resid = (((u16) msg->data[2]) << 8) | msg->data[1]; ++ ++ printk(KERN_DEBUG "ipmisensors: Got first resid 0x%.4x\n", ++ bmc->resid); ++ ++ ipmisensors_get_sdr(bmc, 0, 0, 0); ++ bmc->state = STATE_SDR; ++ break; ++ ++ case STATE_SDR: ++ case STATE_SDRPARTIAL: ++ ipmisensors_rcv_sdr_msg(bmc, msg); ++ break; ++ ++ case STATE_READING: ++ ipmisensors_rcv_reading_msg(bmc, msg); ++ break; ++ ++ case STATE_UNCANCEL: ++ bmc->resid = (((u16) msg->data[2]) << 8) | msg->data[1]; ++ ++ printk(KERN_DEBUG "ipmisensors: Got new resid 0x%.4x\n", ++ bmc->resid); ++ ++ bmc->rx_msg_data_offset = 0; ++ ipmisensors_get_sdr(bmc, 0, bmc->nextrecord, 0); ++ bmc->state = STATE_SDR; ++ break; ++ ++ case STATE_DONE: ++ case STATE_SYSTABLE: ++ break; ++ default: ++ bmc->state = STATE_INIT; ++ } ++} ++ ++/** ++ * Callback to handle a received IPMI message from a given BMC. ++ * ++ * @msg: the received message. ++ * @handler_data: a pointer to the particular bmc ipmisensors_bmc_data struct. ++ */ ++static void ipmisensors_msg_handler(struct ipmi_recv_msg *msg, ++ void *user_msg_data) ++{ ++ struct ipmisensors_bmc_data *bmc = ++ (struct ipmisensors_bmc_data *)user_msg_data; ++ ++ if (msg->msg.data[0] != 0) ++ printk(KERN_WARNING ++ "ipmisensors: Error 0x%x on cmd 0x%x/0x%x\n", ++ msg->msg.data[0], msg->msg.netfn, msg->msg.cmd); ++ ++ if (bmc != NULL && ipmisensors_intf_registered(bmc->interface_id)) { ++ if (bmc->state == STATE_SDR && ++ msg->msg.data[0] == IPMI_INVALID_RESERVATION_ID) { ++ /* reservation cancelled, get new resid */ ++ if (++bmc->errorcount > 275) { ++ printk(KERN_ERR ++ "ipmisensors: Too many reservations cancelled, giving up\n"); ++ bmc->state = STATE_DONE; ++ } else { ++ printk(KERN_DEBUG ++ "ipmisensors: resid 0x%04x cancelled, getting new one\n", ++ bmc->resid); ++ ++ ipmisensors_reserve_sdr(bmc); ++ bmc->state = STATE_UNCANCEL; ++ } ++ } else if (msg->msg.data[0] != IPMI_CC_NO_ERROR && ++ msg->msg.data[0] != IPMI_ERR_RETURNING_REQ_BYTES && ++ msg->msg.data[0] != IPMI_ERR_PROVIDING_RESPONSE) { ++ printk(KERN_ERR ++ "ipmisensors: Error 0x%x on cmd 0x%x/0x%x; state = %d; probably fatal.\n", ++ msg->msg.data[0], msg->msg.netfn & 0xfe, ++ msg->msg.cmd, bmc->state); ++ } else { ++ printk(KERN_DEBUG "ipmisensors: received message\n"); ++ ipmisensors_rcv_msg(bmc, &msg->msg); ++ } ++ ++ } else { ++ printk(KERN_WARNING ++ "ipmisensors: Response for non-registered BMC\n"); ++ if (bmc != NULL) ++ printk(KERN_DEBUG "ipmisensors: BMC ID: %d\n", ++ bmc->interface_id); ++ else ++ printk(KERN_DEBUG "ipmisensors: BMC NULL!\n"); ++ } ++ ++ ipmi_free_recv_msg(msg); ++} ++ ++/****** IPMI Interface Initialization ******/ ++ ++/** ++ * Return true if the given ipmi interface has been registered. ++ * ++ * @ipmi_intf: The IPMI interface number. ++ */ ++static int ipmisensors_intf_registered(int ipmi_intf) ++{ ++ int found = 0; ++ struct ipmisensors_bmc_data *cursor, *next; ++ ++ /* find and free the ipmisensors_bmc_data struct */ ++ list_for_each_entry_safe(cursor, next, &driver_data.bmc_data, list) { ++ if (cursor->interface_id == ipmi_intf) { ++ found++; ++ } ++ } ++ ++ return found; ++} ++ ++/** ++ * Return true if the given BMC has been registered. ++ * ++ * @bmc: The BMC device. ++ */ ++static int ipmisensors_bmc_registered(struct device *bmc) ++{ ++ int found = 0; ++ struct ipmisensors_bmc_data *cursor, *next; ++ ++ /* find and free the ipmisensors_bmc_data struct */ ++ list_for_each_entry_safe(cursor, next, &driver_data.bmc_data, list) { ++ if (cursor->dev == bmc) { ++ found++; ++ } ++ } ++ ++ return found; ++} ++ ++/** ++ * Register new IPMI BMC interface. Interface indpendent callback created ++ * for flexibility in adding new types of interface callbacks in future. ++ * ++ * @ipmi_intf: The IPMI interface number. ++ */ ++static void ipmisensors_register_bmc(int ipmi_intf, struct ipmi_addr *address) ++{ ++ int error; ++ ++ /* allocate a new ipmisensors_bmc_data struct */ ++ ++ struct ipmisensors_bmc_data *bmc = (struct ipmisensors_bmc_data *) ++ kmalloc(sizeof(struct ipmisensors_bmc_data), GFP_KERNEL); ++ ++ /* initialize members */ ++ INIT_LIST_HEAD(&bmc->sdrs); ++ bmc->interface_id = ipmi_intf; ++ ++ bmc->address = *address; ++ ++ bmc->sdr_count = 0; ++ bmc->msgid = 0; ++ bmc->ipmi_sdr_partial_size = IPMI_CHUNK_SIZE; ++ bmc->state = STATE_INIT; ++ bmc->errorcount = 0; ++ bmc->rx_msg_data_offset = 0; ++ bmc->dev = ipmi_get_bmcdevice(ipmi_intf); ++ ++ /* default to 3 second min update interval */ ++ bmc->update_period = 3; ++ ++ if (bmc->dev == NULL) { ++ printk(KERN_ERR ++ "ipmisensors: Error, couldn't get BMC device for interface %d\n", ++ bmc->interface_id); ++ kfree(bmc); ++ return; ++ } ++ ++ /* Create IPMI messaging interface user */ ++ error = ipmi_create_user(bmc->interface_id, &driver_data.ipmi_hndlrs, ++ bmc, &bmc->user); ++ if (error < 0) { ++ printk(KERN_ERR ++ "ipmisensors: Error, unable to register user with ipmi interface %d\n", ++ bmc->interface_id); ++ kfree(bmc); ++ return; ++ } ++ ++ /* Register the BMC as a HWMON class device */ ++ bmc->class_dev = hwmon_device_register(bmc->dev); ++ ++ if (IS_ERR(bmc->class_dev)) { ++ printk(KERN_ERR ++ "ipmisensors: Error, unable to register hwmon class device for interface %d\n", ++ bmc->interface_id); ++ kfree(bmc); ++ return; ++ } ++ ++ /* Register the BMC in the driver */ ++ if (ipmisensors_bmc_registered(bmc->dev)) { ++ printk(KERN_ERR ++ "ipmisensors: BMC on interface %d already registered\n", ++ bmc->interface_id); ++ hwmon_device_unregister(bmc->class_dev); ++ kfree(bmc); ++ return; ++ } ++ ++ ipmi_get_version(bmc->user, &bmc->ipmi_version_major, ++ &bmc->ipmi_version_minor); ++ ++ /* finally add the new bmc data to the bmc data list */ ++ list_add_tail(&bmc->list, &driver_data.bmc_data); ++ driver_data.interfaces++; ++ ++ printk(KERN_INFO ++ "ipmisensors: Registered IPMI %d.%d BMC over interface %d\n", ++ bmc->ipmi_version_major, ++ bmc->ipmi_version_minor, bmc->interface_id); ++ ++ /* Send a reserve SDR command to the bmc */ ++ ipmisensors_reserve_sdr(bmc); ++ ++ /* initialize the bmc's update work struct */ ++ INIT_DELAYED_WORK(&bmc->update_work, ipmisensors_update_bmc); ++} ++ ++/** ++ * Callback for when an IPMI BMC is gone. Interface indpendent callback created ++ * for flexibility in adding new types of interface callbacks in future. ++ * ++ * @ipmi_intf: The IPMI interface number. ++ */ ++static void ipmisensors_unregister_bmc(int ipmi_intf) ++{ ++ struct ipmisensors_bmc_data *cursor, *next; ++ ++ /* find and free the ipmisensors_bmc_data struct */ ++ list_for_each_entry_safe(cursor, next, &driver_data.bmc_data, list) { ++ if (cursor->interface_id == ipmi_intf) { ++ list_del(&cursor->list); ++ printk(KERN_DEBUG ++ "ipmisensors: cancelling queued work\n"); ++ /* cancel update work queued for this bmc */ ++ cancel_delayed_work(&cursor->update_work); ++ printk(KERN_DEBUG ++ "ipmisensors: waiting for update to finish\n"); ++ /* wait for readings to finish */ ++ while (cursor->state != STATE_DONE) ; ++ ++ device_remove_file(cursor->dev, ++ &cursor->alarms_attr.dev_attr); ++ device_remove_file(cursor->dev, ++ &cursor->update_attr.dev_attr); ++ hwmon_device_unregister(cursor->class_dev); ++ ipmisensors_sdr_cleanup(cursor); ++ ipmi_destroy_user(cursor->user); ++ ++ printk(KERN_INFO ++ "ipmisensors: Unegistered IPMI interface %d\n", ++ cursor->interface_id); ++ ++ kfree(cursor); ++ driver_data.interfaces--; ++ } ++ } ++ ++} ++ ++/** ++ * Unregister all registered bmcs. ++ */ ++static void ipmisensors_unregister_bmc_all(void) ++{ ++ struct ipmisensors_bmc_data *cursor, *next; ++ ++ /* find and free the ipmisensors_bmc_data struct */ ++ list_for_each_entry_safe(cursor, next, &driver_data.bmc_data, list) { ++ list_del(&cursor->list); ++ ++ /* cancel update work queued for this bmc */ ++ printk(KERN_DEBUG "ipmisensors: cancelling queued work\n"); ++ cancel_delayed_work(&cursor->update_work); ++ ++ printk(KERN_DEBUG ++ "ipmisensors: waiting for update to finish\n"); ++ /* wait for readings to finish */ ++ while (cursor->state != STATE_DONE) ; ++ ++ device_remove_file(cursor->dev, &cursor->alarms_attr.dev_attr); ++ device_remove_file(cursor->dev, &cursor->update_attr.dev_attr); ++ hwmon_device_unregister(cursor->class_dev); ++ ipmisensors_sdr_cleanup(cursor); ++ ipmi_destroy_user(cursor->user); ++ ++ printk(KERN_INFO ++ "ipmisensors: Unegistered IPMI interface %d\n", ++ cursor->interface_id); ++ ++ kfree(cursor); ++ } ++ ++ driver_data.interfaces = 0; ++} ++ ++/** ++ * Callback for when a new IPMI SMI type interface is found. ++ * ++ * @if_num: The IPMI interface number. ++ */ ++static void ipmisensors_new_smi(int if_num, struct device *dev) ++{ ++ struct ipmi_addr smi_address = { ++ IPMI_SYSTEM_INTERFACE_ADDR_TYPE, ++ IPMI_BMC_CHANNEL, ++ {0}, ++ }; ++ ++ /* calls the generic new interface function */ ++ ipmisensors_register_bmc(if_num, &smi_address); ++} ++ ++/** ++ * Callback for when an exisiting IPMI SMI type interface is gone. ++ * ++ * @if_num: The IPMI interface number. ++ */ ++static void ipmisensors_smi_gone(int if_num) ++{ ++ if (driver_data.interfaces > 0) { ++ ipmisensors_unregister_bmc(if_num); ++ } ++} ++ ++/** ++ * Initialize the module. ++ */ ++static int __init ipmisensors_init(void) ++{ ++ int error; ++ printk(KERN_INFO "ipmisensors - IPMI BMC sensors interface\n"); ++ ++ /* init cache managers */ ++ driver_data.sdrdata_cache = ++ kmem_cache_create("ipmisensors_sdrdata", sizeof(struct sdrdata), 0, ++ 0, NULL, NULL); ++ driver_data.sysfsattr_cache = ++ kmem_cache_create("ipmisensors_sysfsattr", ++ sizeof(struct ipmisensors_device_attribute), 0, 0, ++ NULL, NULL); ++ ++ if (!driver_data.sdrdata_cache || !driver_data.sysfsattr_cache) { ++ if (driver_data.sdrdata_cache) ++ kmem_cache_destroy(driver_data.sdrdata_cache); ++ if (driver_data.sysfsattr_cache) ++ kmem_cache_destroy(driver_data.sysfsattr_cache); ++ return -ENOMEM; ++ } ++ ++ /* register IPMI interface callback(s) */ ++ error = ipmi_smi_watcher_register(&driver_data.smi_watcher); ++ if (error) { ++ printk(KERN_WARNING ++ "ipmisensors: can't register smi watcher\n"); ++ return error; ++ } ++ ++ /* create work queue, keep it simple, single-threaded */ ++ ipmisensors_workqueue = ++ create_singlethread_workqueue("ipmisensors_workqueue"); ++ ++ return 0; ++} ++ ++/** ++ * Cleanup ++ */ ++static void ipmisensors_cleanup(void) ++{ ++ /* start cleanup */ ++ cleanup = 1; ++ ++ /* unregister bmcs */ ++ printk(KERN_DEBUG "ipmisensors: unregister bmcs\n"); ++ ipmi_smi_watcher_unregister(&driver_data.smi_watcher); ++ ipmisensors_unregister_bmc_all(); ++ ++ /* flush & destroy work queue */ ++ printk(KERN_DEBUG "ipmisensors: destroy workqueue\n"); ++ flush_workqueue(ipmisensors_workqueue); ++ destroy_workqueue(ipmisensors_workqueue); ++ ++ /* remove cache managers */ ++ if (driver_data.sdrdata_cache) ++ kmem_cache_destroy(driver_data.sdrdata_cache); ++ if (driver_data.sysfsattr_cache) ++ kmem_cache_destroy(driver_data.sysfsattr_cache); ++} ++ ++/** ++ * Cleanup and exit the module ++ */ ++static void __exit ipmisensors_exit(void) ++{ ++ ipmisensors_cleanup(); ++ printk(KERN_DEBUG "ipmisensors: cleanup finished\n"); ++} ++ ++MODULE_AUTHOR("Yani Ioannou <yani.ioannou@gmail.com>"); ++MODULE_DESCRIPTION("IPMI BMC sensors"); ++MODULE_LICENSE("GPL"); ++ ++module_init(ipmisensors_init); ++module_exit(ipmisensors_exit); +diff -rduNp linux-2.6.20.3.orig/drivers/hwmon/ipmisensors.h linux-2.6.20.3/drivers/hwmon/ipmisensors.h +--- linux-2.6.20.3.orig/drivers/hwmon/ipmisensors.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.20.3/drivers/hwmon/ipmisensors.h 2007-03-14 14:41:23.000000000 +0100 +@@ -0,0 +1,240 @@ ++/* ++ * ipmisensors.h - lm_sensors interface to IPMI sensors. ++ * ++ * Copyright (C) 2004-2006 Yani Ioannou <yani.ioannou@gmail.com> ++ * ++ * Adapted from bmcsensors (lm-sensors for linux 2.4) ++ * bmcsensors (C) Mark D. Studebaker <mdsxyz123@yahoo.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#include <linux/ipmi.h> ++#include <linux/list.h> ++#include <linux/slab.h> ++#include <linux/workqueue.h> ++ ++/* SDR defs */ ++#define STYPE_TEMP 0x01 ++#define STYPE_VOLT 0x02 ++#define STYPE_CURR 0x03 ++#define STYPE_FAN 0x04 ++ ++#define SDR_LIMITS 8 ++#define SDR_MAX_ID_LENGTH 16 ++#define SDR_MAX_UNPACKED_ID_LENGTH ((SDR_MAX_ID_LENGTH * 4 / 3) + 2) ++ ++/* the last sensor type we are interested in */ ++#define STYPE_MAX 4 ++ ++#define IPMI_SDR_SIZE 67 ++#define IPMI_CHUNK_SIZE 16 ++ ++#define MAX_FILENAME_LENGTH 30 ++ ++struct ipmisensors_device_attribute { ++ struct device_attribute dev_attr; ++ struct sdrdata *sdr; ++}; ++#define to_ipmisensors_dev_attr(_dev_attr) \ ++ container_of(_dev_attr, struct ipmisensors_device_attribute, dev_attr) ++ ++#define IPMISENSORS_DEVICE_ATTR(_name,_mode,_show,_store,_index) \ ++struct ipmisensors_attribute sensor_dev_attr_##_name = { \ ++ .dev_attr = __ATTR(_name,_mode,_show,_store), \ ++ .index = _index, \ ++} ++ ++struct ipmisensors_bmc_device_attribute { ++ struct device_attribute dev_attr; ++ struct ipmisensors_bmc_data *bmc; ++}; ++#define to_ipmisensors_bmc_dev_attr(_dev_attr) \ ++ container_of(_dev_attr, struct ipmisensors_bmc_device_attribute, dev_attr) ++ ++/** ++ * &struct_sdrdata stores the IPMI Sensor Data Record (SDR) data, as recieved from the BMC, along with the corresponding sysfs attributes ++ */ ++struct sdrdata { ++ struct list_head list; ++ /* retrieved from SDR, not expected to change */ ++ /* Sensor Type Code */ ++ u8 stype; ++ u8 number; ++ /* Sensor Capability Code */ ++ u8 capab; ++ u16 thresh_mask; ++ u8 format; ++ u8 linear; ++ s16 m; ++ s16 b; ++ u8 k; ++ u8 nominal; ++ u8 limits[SDR_LIMITS]; ++ /* index into limits for reported upper and lower limit */ ++ int lim1, lim2; ++ u8 lim1_write, lim2_write; ++ u8 string_type; ++ u8 id_length; ++ u8 id[SDR_MAX_ID_LENGTH]; ++ /* retrieved from reading */ ++ u8 reading; ++ u8 status; ++ u8 thresholds; ++ /* sensor's bmc */ ++ struct ipmisensors_bmc_data *bmc; ++ /* sysfs entries */ ++ struct ipmisensors_device_attribute attr; ++ char *attr_name; ++ struct ipmisensors_device_attribute attr_min; ++ char *attr_min_name; ++ struct ipmisensors_device_attribute attr_max; ++ char *attr_max_name; ++ struct ipmisensors_device_attribute attr_label; ++ char *attr_label_name; ++ ++}; ++ ++/** ++ * &struct_ipmisensors_data stores the data for the ipmisensors driver. ++ */ ++struct ipmisensors_data { ++ /* Driver struct */ ++ char *driver_name; ++ ++ /* Linked list of ipmisensors_bmc_data structs, one for each BMC */ ++ struct list_head bmc_data; ++ ++ /* Number of ipmi interfaces (and hence ipmisensors_data structs). */ ++ int interfaces; ++ ++ /* IPMI kernel interface - SMI watcher */ ++ struct ipmi_smi_watcher smi_watcher; ++ ++ /* IPMI kernel interface - user handlers */ ++ struct ipmi_user_hndl ipmi_hndlrs; ++ ++ /* Cache manager for sdrdata cache */ ++ struct kmem_cache *sdrdata_cache; ++ ++ /* Cache manager for ipmi_sensor_device_attribute cache */ ++ struct kmem_cache *sysfsattr_cache; ++}; ++ ++/** ++ * &states: enumeration of state codes for a bmc specific ipmisensors ++ */ ++enum states { ++ STATE_INIT, ++ STATE_RESERVE, ++ STATE_SDR, ++ STATE_SDRPARTIAL, ++ STATE_READING, ++ STATE_UNCANCEL, ++ STATE_SYSTABLE, ++ STATE_DONE ++}; ++ ++/** ++ * &struct_ipmisensors_bmc_data stores the data for a particular IPMI BMC. ++ */ ++struct ipmisensors_bmc_data { ++ struct list_head list; ++ ++ /* The IPMI interface number */ ++ int interface_id; ++ ++ /* The IPMI address */ ++ struct ipmi_addr address; ++ ++ /* List of sdrdata structs (sdrs) recieved from the BMC */ ++ struct list_head sdrs; ++ ++ /* Count of the number of sdrs stored in the sdr list */ ++ int sdr_count; ++ ++ /* next message id */ ++ int msgid; ++ ++ /* The ipmi interface 'user' used to access this particular bmc */ ++ ipmi_user_t user; ++ ++ /* BMC IPMI Version (major) */ ++ unsigned char ipmi_version_major; ++ ++ /* BMC IPMI Version (minor) */ ++ unsigned char ipmi_version_minor; ++ ++ /* The size of the SDR request message */ ++ int ipmi_sdr_partial_size; ++ ++ /* transmit message buffer */ ++ struct kernel_ipmi_msg tx_message; ++ ++ /* ipmi transmited data buffer */ ++ unsigned char tx_msg_data[IPMI_MAX_MSG_LENGTH + 50]; /* why the +50 in bmcsensors? */ ++ ++ /* ipmi recieved data buffer */ ++ unsigned char rx_msg_data[IPMI_MAX_MSG_LENGTH + 50]; ++ ++ /* current recieve buffer offset */ ++ int rx_msg_data_offset; ++ ++ /* The id of then next SDR record to read during update cycle */ ++ u16 nextrecord; ++ ++ /* BMC SDR Reservation ID */ ++ u16 resid; ++ ++ /* Alarm status */ ++ u8 alarms; ++ ++ /* The cumalative error count for this bmc */ ++ int errorcount; ++ ++ /* The current state of this bmc w.r.t. ipmisensors (see enum states) */ ++ int state; ++ ++ /* The current sdr for which a reading is pending */ ++ struct sdrdata *current_sdr; ++ ++ /* The BMC's device struct */ ++ struct device *dev; ++ ++ /* hwmon class device */ ++ struct class_device *class_dev; ++ ++ /* hwmon device name */ ++ struct device_attribute name_attr; ++ ++ /* alarms attribute */ ++ struct ipmisensors_bmc_device_attribute alarms_attr; ++ ++ /* update_period attribute */ ++ struct ipmisensors_bmc_device_attribute update_attr; ++ ++ /* lower bound on time between updates (in seconds) */ ++ unsigned int update_period; ++ ++ /* semaphore used to do a headcount of the SDR readings we are waiting ++ * on in a given bmc update */ ++ struct semaphore update_semaphore; ++ ++ /* bmc's work struct for updating sensors */ ++ struct delayed_work update_work; ++ ++ /* bmc's work struct for building the sysfs workqueue */ ++ struct work_struct sysfs_work; ++}; +diff -rduNp linux-2.6.20.3.orig/include/linux/ipmi.h linux-2.6.20.3/include/linux/ipmi.h +--- linux-2.6.20.3.orig/include/linux/ipmi.h 2007-03-13 19:27:08.000000000 +0100 ++++ linux-2.6.20.3/include/linux/ipmi.h 2007-03-14 14:23:02.000000000 +0100 +@@ -300,6 +300,9 @@ int ipmi_create_user(unsigned int + safe, too. */ + int ipmi_destroy_user(ipmi_user_t user); + ++/* Get the IPMI BMC's device struct */ ++struct device *ipmi_get_bmcdevice(int ipmi_intf); ++ + /* Get the IPMI version of the BMC we are talking to. */ + void ipmi_get_version(ipmi_user_t user, + unsigned char *major, +diff -rduNp linux-2.6.20.3.orig/include/linux/ipmi_msgdefs.h linux-2.6.20.3/include/linux/ipmi_msgdefs.h +--- linux-2.6.20.3.orig/include/linux/ipmi_msgdefs.h 2007-03-13 19:27:08.000000000 +0100 ++++ linux-2.6.20.3/include/linux/ipmi_msgdefs.h 2007-03-14 14:23:02.000000000 +0100 +@@ -45,6 +45,7 @@ + + #define IPMI_NETFN_APP_REQUEST 0x06 + #define IPMI_NETFN_APP_RESPONSE 0x07 ++#define IPMI_GET_DEVICE_GUID_CMD 0x08 + #define IPMI_GET_DEVICE_ID_CMD 0x01 + #define IPMI_COLD_RESET_CMD 0x02 + #define IPMI_WARM_RESET_CMD 0x03 +@@ -57,6 +58,11 @@ + #define IPMI_GET_BMC_GLOBAL_ENABLES_CMD 0x2f + #define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35 + #define IPMI_GET_CHANNEL_INFO_CMD 0x42 ++#define IPMI_RESERVE_SDR 0x22 ++#define IPMI_GET_SDR 0x23 ++#define IPMI_GET_SENSOR_STATE_READING 0x2D ++#define IPMI_SET_SENSOR_HYSTERESIS 0x24 ++#define IPMI_SET_SENSOR_THRESHOLD 0x26 + + #define IPMI_NETFN_STORAGE_REQUEST 0x0a + #define IPMI_NETFN_STORAGE_RESPONSE 0x0b +@@ -79,10 +85,13 @@ + #define IPMI_NODE_BUSY_ERR 0xc0 + #define IPMI_INVALID_COMMAND_ERR 0xc1 + #define IPMI_TIMEOUT_ERR 0xc3 ++#define IPMI_INVALID_RESERVATION_ID 0xc5 + #define IPMI_ERR_MSG_TRUNCATED 0xc6 + #define IPMI_REQ_LEN_INVALID_ERR 0xc7 + #define IPMI_REQ_LEN_EXCEEDED_ERR 0xc8 + #define IPMI_NOT_IN_MY_STATE_ERR 0xd5 /* IPMI 2.0 */ ++#define IPMI_ERR_RETURNING_REQ_BYTES 0xca ++#define IPMI_ERR_PROVIDING_RESPONSE 0xce + #define IPMI_LOST_ARBITRATION_ERR 0x81 + #define IPMI_BUS_ERR 0x82 + #define IPMI_NAK_ON_WRITE_ERR 0x83 |