u-boot: bump version

2 files changed, 1 insertions, 3178 deletions

diff --git a/target/u-boot/Makefile.in b/target/u-boot/Makefile.in
index fc4745430..d83933a01 100644
--- a/target/u-boot/Makefile.in
+++ b/target/u-boot/Makefile.in
@@ -3,7 +3,7 @@
 # U-Boot
 #
 #############################################################
-U_BOOT_VERSION:=1.3.0
+U_BOOT_VERSION:=1.3.2
 U_BOOT_SOURCE:=u-boot-$(U_BOOT_VERSION).tar.bz2
 U_BOOT_SITE:=ftp://ftp.denx.de/pub/u-boot
 U_BOOT_DIR:=$(PROJECT_BUILD_DIR)/u-boot-$(U_BOOT_VERSION)
diff --git a/target/u-boot/u-boot-1.3.0-avr32-100-atmel.2.patch b/target/u-boot/u-boot-1.3.0-avr32-100-atmel.2.patch
deleted file mode 100644
index a6d484b2d..000000000
--- a/target/u-boot/u-boot-1.3.0-avr32-100-atmel.2.patch
+++ /dev/null
@@ -1,3177 +0,0 @@
- MAINTAINERS                                       |    6 +-
- MAKEALL                                           |    3 +
- Makefile                                          |   13 +-
- README                                            |    4 +-
- board/atmel/atngw100/Makefile                     |   40 ++++
- board/atmel/atngw100/atngw100.c                   |   73 +++++++
- board/atmel/atngw100/config.mk                    |    3 +
- board/atmel/atngw100/eth.c                        |   36 ++++
- board/atmel/atngw100/flash.c                      |  232 +++++++++++++++++++++
- board/atmel/atngw100/u-boot.lds                   |   80 +++++++
- cpu/at32ap/at32ap7000/Makefile                    |   43 ----
- cpu/at32ap/at32ap7000/gpio.c                      |  137 ------------
- cpu/at32ap/at32ap700x/Makefile                    |   43 ++++
- cpu/at32ap/at32ap700x/gpio.c                      |  144 +++++++++++++
- cpu/at32ap/atmel_mci.c                            |   13 +-
- include/asm-avr32/arch-at32ap7000/clk.h           |   70 ------
- include/asm-avr32/arch-at32ap7000/gpio.h          |  212 -------------------
- include/asm-avr32/arch-at32ap7000/hmatrix2.h      |  232 ---------------------
- include/asm-avr32/arch-at32ap7000/memory-map.h    |   66 ------
- include/asm-avr32/arch-at32ap7000/mmc.h           |   96 ---------
- include/asm-avr32/arch-at32ap700x/chip-features.h |   34 +++
- include/asm-avr32/arch-at32ap700x/clk.h           |   78 +++++++
- include/asm-avr32/arch-at32ap700x/gpio.h          |  220 +++++++++++++++++++
- include/asm-avr32/arch-at32ap700x/hmatrix2.h      |  232 +++++++++++++++++++++
- include/asm-avr32/arch-at32ap700x/memory-map.h    |   66 ++++++
- include/asm-avr32/arch-at32ap700x/mmc.h           |   96 +++++++++
- include/configs/atngw100.h                        |  177 ++++++++++++++++
- include/configs/atstk1002.h                       |    4 +-
- include/configs/atstk1003.h                       |  184 ++++++++++++++++
- include/configs/atstk1004.h                       |  185 ++++++++++++++++
- lib_avr32/board.c                                 |   10 +
- net/eth.c                                         |    4 +
- 32 files changed, 1966 insertions(+), 870 deletions(-)
- create mode 100644 board/atmel/atngw100/Makefile
- create mode 100644 board/atmel/atngw100/atngw100.c
- create mode 100644 board/atmel/atngw100/config.mk
- create mode 100644 board/atmel/atngw100/eth.c
- create mode 100644 board/atmel/atngw100/flash.c
- create mode 100644 board/atmel/atngw100/u-boot.lds
- delete mode 100644 cpu/at32ap/at32ap7000/Makefile
- delete mode 100644 cpu/at32ap/at32ap7000/gpio.c
- create mode 100644 cpu/at32ap/at32ap700x/Makefile
- create mode 100644 cpu/at32ap/at32ap700x/gpio.c
- delete mode 100644 include/asm-avr32/arch-at32ap7000/clk.h
- delete mode 100644 include/asm-avr32/arch-at32ap7000/gpio.h
- delete mode 100644 include/asm-avr32/arch-at32ap7000/hmatrix2.h
- delete mode 100644 include/asm-avr32/arch-at32ap7000/memory-map.h
- delete mode 100644 include/asm-avr32/arch-at32ap7000/mmc.h
- create mode 100644 include/asm-avr32/arch-at32ap700x/chip-features.h
- create mode 100644 include/asm-avr32/arch-at32ap700x/clk.h
- create mode 100644 include/asm-avr32/arch-at32ap700x/gpio.h
- create mode 100644 include/asm-avr32/arch-at32ap700x/hmatrix2.h
- create mode 100644 include/asm-avr32/arch-at32ap700x/memory-map.h
- create mode 100644 include/asm-avr32/arch-at32ap700x/mmc.h
- create mode 100644 include/configs/atngw100.h
- create mode 100644 include/configs/atstk1003.h
- create mode 100644 include/configs/atstk1004.h
-
-diff --git a/MAINTAINERS b/MAINTAINERS
-index b8c1fdc..457dce3 100644
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -630,7 +630,11 @@ Hayden Fraser <Hayden.Fraser@freescale.com>
- 
- Haavard Skinnemoen <hskinnemoen@atmel.com>
- 
--	ATSTK1000		AT32AP7000
-+	ATSTK1000		AT32AP7xxx
-+	ATSTK1002		AT32AP7000
-+	ATSTK1003		AT32AP7001
-+	ATSTK1004		AT32AP7002
-+	ATNGW100		AT32AP7000
- 
- #########################################################################
- # End of MAINTAINERS list						#
-diff --git a/MAKEALL b/MAKEALL
-index 20ef4e1..1538478 100755
---- a/MAKEALL
-+++ b/MAKEALL
-@@ -641,6 +641,9 @@ LIST_coldfire="			\
- 
- LIST_avr32="		\
- 	atstk1002	\
-+	atstk1003	\
-+	atstk1004	\
-+	atngw100	\
- "
- 
- #########################################################################
-diff --git a/Makefile b/Makefile
-index ac4b430..2db97fd 100644
---- a/Makefile
-+++ b/Makefile
-@@ -24,7 +24,7 @@
- VERSION = 1
- PATCHLEVEL = 3
- SUBLEVEL = 0
--EXTRAVERSION =
-+EXTRAVERSION = .atmel.2
- U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
- VERSION_FILE = $(obj)include/version_autogenerated.h
- 
-@@ -2607,7 +2607,16 @@ bf561-ezkit_config:	unconfig
- #########################################################################
- 
- atstk1002_config	:	unconfig
--	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
-+	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
-+
-+atstk1003_config	:	unconfig
-+	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
-+
-+atstk1004_config	:	unconfig
-+	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
-+
-+atngw100_config	:	unconfig
-+	@$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
- 
- #########################################################################
- #########################################################################
-diff --git a/README b/README
-index 3dad5fc..26f93c2 100644
---- a/README
-+++ b/README
-@@ -235,9 +235,7 @@ The following options need to be configured:
- - Board Type:	Define exactly one, e.g. CONFIG_MPC8540ADS.
- 
- - CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined)
--		Define exactly one of
--		CONFIG_ATSTK1002
--
-+		Define exactly one, e.g. CONFIG_ATSTK1002
- 
- - CPU Module Type: (if CONFIG_COGENT is defined)
- 		Define exactly one of
-diff --git a/board/atmel/atngw100/Makefile b/board/atmel/atngw100/Makefile
-new file mode 100644
-index 0000000..f1ea6e6
---- /dev/null
-+++ b/board/atmel/atngw100/Makefile
-@@ -0,0 +1,40 @@
-+#
-+# Copyright (C) 2005-2006 Atmel Corporation
-+#
-+# See file CREDITS for list of people who contributed to this project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB	:= $(obj)lib$(BOARD).a
-+
-+COBJS	:= $(BOARD).o flash.o eth.o
-+
-+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-+
-+$(LIB): $(obj).depend $(OBJS)
-+	$(AR) $(ARFLAGS) $@ $(OBJS)
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
-diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
-new file mode 100644
-index 0000000..bd4b6b4
---- /dev/null
-+++ b/board/atmel/atngw100/atngw100.c
-@@ -0,0 +1,73 @@
-+/*
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#include <common.h>
-+
-+#include <asm/io.h>
-+#include <asm/sdram.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/hmatrix2.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+static const struct sdram_info sdram = {
-+	.phys_addr	= CFG_SDRAM_BASE,
-+	.row_bits	= 13,
-+	.col_bits	= 9,
-+	.bank_bits	= 2,
-+	.cas		= 3,
-+	.twr		= 2,
-+	.trc		= 7,
-+	.trp		= 2,
-+	.trcd		= 2,
-+	.tras		= 5,
-+	.txsr		= 5,
-+};
-+
-+int board_early_init_f(void)
-+{
-+	/* Set the SDRAM_ENABLE bit in the HEBI SFR */
-+	hmatrix2_writel(SFR4, 1 << 1);
-+
-+	gpio_enable_ebi();
-+	gpio_enable_usart1();
-+
-+#if defined(CONFIG_MACB)
-+	gpio_enable_macb0();
-+	gpio_enable_macb1();
-+#endif
-+#if defined(CONFIG_MMC)
-+	gpio_enable_mmci();
-+#endif
-+
-+	return 0;
-+}
-+
-+long int initdram(int board_type)
-+{
-+	return sdram_init(&sdram);
-+}
-+
-+void board_init_info(void)
-+{
-+	gd->bd->bi_phy_id[0] = 0x01;
-+	gd->bd->bi_phy_id[1] = 0x03;
-+}
-diff --git a/board/atmel/atngw100/config.mk b/board/atmel/atngw100/config.mk
-new file mode 100644
-index 0000000..9a794e5
---- /dev/null
-+++ b/board/atmel/atngw100/config.mk
-@@ -0,0 +1,3 @@
-+TEXT_BASE		= 0x00000000
-+PLATFORM_RELFLAGS	+= -ffunction-sections -fdata-sections
-+PLATFORM_LDFLAGS	+= --gc-sections
-diff --git a/board/atmel/atngw100/eth.c b/board/atmel/atngw100/eth.c
-new file mode 100644
-index 0000000..d1d57bb
---- /dev/null
-+++ b/board/atmel/atngw100/eth.c
-@@ -0,0 +1,36 @@
-+/*
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * Ethernet initialization for the AVR32 Network Gateway
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#include <common.h>
-+
-+#include <asm/arch/memory-map.h>
-+
-+extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-+
-+#ifdef CONFIG_CMD_NET
-+void atngw100_eth_initialize(bd_t *bi)
-+{
-+	macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);
-+	macb_eth_initialize(1, (void *)MACB1_BASE, bi->bi_phy_id[1]);
-+}
-+#endif
-diff --git a/board/atmel/atngw100/flash.c b/board/atmel/atngw100/flash.c
-new file mode 100644
-index 0000000..2d9423f
---- /dev/null
-+++ b/board/atmel/atngw100/flash.c
-@@ -0,0 +1,232 @@
-+/*
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#include <common.h>
-+
-+#ifdef CONFIG_ATNGW100_EXT_FLASH
-+#include <asm/cacheflush.h>
-+#include <asm/io.h>
-+#include <asm/sections.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+flash_info_t flash_info[1];
-+
-+static void __flashprog flash_identify(uint16_t *flash, flash_info_t *info)
-+{
-+	unsigned long flags;
-+
-+	flags = disable_interrupts();
-+
-+	dcache_flush_unlocked();
-+
-+	writew(0xaa, flash + 0x555);
-+	writew(0x55, flash + 0xaaa);
-+	writew(0x90, flash + 0x555);
-+	info->flash_id = readl(flash);
-+	writew(0xff, flash);
-+
-+	readw(flash);
-+
-+	if (flags)
-+		enable_interrupts();
-+}
-+
-+unsigned long flash_init(void)
-+{
-+	unsigned long addr;
-+	unsigned int i;
-+
-+	flash_info[0].size = CFG_FLASH_SIZE;
-+	flash_info[0].sector_count = 135;
-+
-+	flash_identify(uncached((void *)CFG_FLASH_BASE), &flash_info[0]);
-+
-+	for (i = 0, addr = 0; i < 8; i++, addr += 0x2000)
-+		flash_info[0].start[i] = addr;
-+	for (; i < flash_info[0].sector_count; i++, addr += 0x10000)
-+		flash_info[0].start[i] = addr;
-+
-+	return CFG_FLASH_SIZE;
-+}
-+
-+void flash_print_info(flash_info_t *info)
-+{
-+	printf("Flash: Vendor ID: 0x%02x, Product ID: 0x%02x\n",
-+	       info->flash_id >> 16, info->flash_id & 0xffff);
-+	printf("Size: %ld MB in %d sectors\n",
-+	       info->size >> 10, info->sector_count);
-+}
-+
-+int __flashprog flash_erase(flash_info_t *info, int s_first, int s_last)
-+{
-+	unsigned long flags;
-+	unsigned long start_time;
-+	uint16_t *fb, *sb;
-+	unsigned int i;
-+	int ret;
-+	uint16_t status;
-+
-+	if ((s_first < 0) || (s_first > s_last)
-+	    || (s_last >= info->sector_count)) {
-+		puts("Error: first and/or last sector out of range\n");
-+		return ERR_INVAL;
-+	}
-+
-+	for (i = s_first; i < s_last; i++)
-+		if (info->protect[i]) {
-+			printf("Error: sector %d is protected\n", i);
-+			return ERR_PROTECTED;
-+		}
-+
-+	fb = (uint16_t *)uncached(info->start[0]);
-+
-+	dcache_flush_unlocked();
-+
-+	for (i = s_first; (i <= s_last) && !ctrlc(); i++) {
-+		printf("Erasing sector %3d...", i);
-+
-+		sb = (uint16_t *)uncached(info->start[i]);
-+
-+		flags = disable_interrupts();
-+
-+		start_time = get_timer(0);
-+
-+		/* Unlock sector */
-+		writew(0xaa, fb + 0x555);
-+		writew(0x70, sb);
-+
-+		/* Erase sector */
-+		writew(0xaa, fb + 0x555);
-+		writew(0x55, fb + 0xaaa);
-+		writew(0x80, fb + 0x555);
-+		writew(0xaa, fb + 0x555);
-+		writew(0x55, fb + 0xaaa);
-+		writew(0x30, sb);
-+
-+		/* Wait for completion */
-+		ret = ERR_OK;
-+		do {
-+			/* TODO: Timeout */
-+			status = readw(sb);
-+		} while ((status != 0xffff) && !(status & 0x28));
-+
-+		writew(0xf0, fb);
-+
-+		/*
-+		 * Make sure the command actually makes it to the bus
-+		 * before we re-enable interrupts.
-+		 */
-+		readw(fb);
-+
-+		if (flags)
-+			enable_interrupts();
-+
-+		if (status != 0xffff) {
-+			printf("Flash erase error at address 0x%p: 0x%02x\n",
-+			       sb, status);
-+			ret = ERR_PROG_ERROR;
-+			break;
-+		}
-+	}
-+
-+	if (ctrlc())
-+		printf("User interrupt!\n");
-+
-+	return ERR_OK;
-+}
-+
-+int __flashprog write_buff(flash_info_t *info, uchar *src,
-+			   ulong addr, ulong count)
-+{
-+	unsigned long flags;
-+	uint16_t *base, *p, *s, *end;
-+	uint16_t word, status, status1;
-+	int ret = ERR_OK;
-+
-+	if (addr < info->start[0]
-+	    || (addr + count) > (info->start[0] + info->size)
-+	    || (addr + count) < addr) {
-+		puts("Error: invalid address range\n");
-+		return ERR_INVAL;
-+	}
-+
-+	if (addr & 1 || count & 1 || (unsigned int)src & 1) {
-+		puts("Error: misaligned source, destination or count\n");
-+		return ERR_ALIGN;
-+	}
-+
-+	base = (uint16_t *)uncached(info->start[0]);
-+	end = (uint16_t *)uncached(addr + count);
-+
-+	flags = disable_interrupts();
-+
-+	dcache_flush_unlocked();
-+	sync_write_buffer();
-+
-+	for (p = (uint16_t *)uncached(addr), s = (uint16_t *)src;
-+	     p < end && !ctrlc(); p++, s++) {
-+		word = *s;
-+
-+		writew(0xaa, base + 0x555);
-+		writew(0x55, base + 0xaaa);
-+		writew(0xa0, base + 0x555);
-+		writew(word, p);
-+
-+		sync_write_buffer();
-+
-+		/* Wait for completion */
-+		status1 = readw(p);
-+		do {
-+			/* TODO: Timeout */
-+			status = status1;
-+			status1 = readw(p);
-+		} while (((status ^ status1) & 0x40)	/* toggled */
-+			 && !(status1 & 0x28));		/* error bits */
-+
-+		/*
-+		 * We'll need to check once again for toggle bit
-+		 * because the toggle bit may stop toggling as I/O5
-+		 * changes to "1" (ref at49bv642.pdf p9)
-+		 */
-+		status1 = readw(p);
-+		status = readw(p);
-+		if ((status ^ status1) & 0x40) {
-+			printf("Flash write error at address 0x%p: "
-+			       "0x%02x != 0x%02x\n",
-+			       p, status,word);
-+			ret = ERR_PROG_ERROR;
-+			writew(0xf0, base);
-+			readw(base);
-+			break;
-+		}
-+
-+		writew(0xf0, base);
-+		readw(base);
-+	}
-+
-+	if (flags)
-+		enable_interrupts();
-+
-+	return ret;
-+}
-+
-+#endif /* CONFIG_ATSTK1000_EXT_FLASH */
-diff --git a/board/atmel/atngw100/u-boot.lds b/board/atmel/atngw100/u-boot.lds
-new file mode 100644
-index 0000000..34e347a
---- /dev/null
-+++ b/board/atmel/atngw100/u-boot.lds
-@@ -0,0 +1,80 @@
-+/* -*- Fundamental -*-
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
-+OUTPUT_ARCH(avr32)
-+ENTRY(_start)
-+
-+SECTIONS
-+{
-+	. = 0;
-+	_text = .;
-+	.text : {
-+		*(.text)
-+		*(.text.*)
-+	}
-+
-+	. = ALIGN(32);
-+	__flashprog_start = .;
-+	.flashprog : {
-+		*(.flashprog)
-+	}
-+	. = ALIGN(32);
-+	__flashprog_end = .;
-+	_etext = .;
-+
-+	.rodata : {
-+		*(.rodata)
-+		*(.rodata.*)
-+	}
-+
-+	. = ALIGN(8);
-+	_data = .;
-+	.data : {
-+		*(.data)
-+		*(.data.*)
-+	}
-+
-+	. = ALIGN(4);
-+	__u_boot_cmd_start = .;
-+	.u_boot_cmd : {
-+		KEEP(*(.u_boot_cmd))
-+	}
-+	__u_boot_cmd_end = .;
-+
-+	. = ALIGN(4);
-+	_got = .;
-+	.got : {
-+		*(.got)
-+	}
-+	_egot = .;
-+
-+	. = ALIGN(8);
-+	_edata = .;
-+
-+	.bss : {
-+		*(.bss)
-+		*(.bss.*)
-+	}
-+	. = ALIGN(8);
-+	_end = .;
-+}
-diff --git a/cpu/at32ap/at32ap7000/Makefile b/cpu/at32ap/at32ap7000/Makefile
-deleted file mode 100644
-index d276712..0000000
---- a/cpu/at32ap/at32ap7000/Makefile
-+++ /dev/null
-@@ -1,43 +0,0 @@
--#
--# Copyright (C) 2005-2006 Atmel Corporation
--#
--# See file CREDITS for list of people who contributed to this
--# project.
--#
--# This program is free software; you can redistribute it and/or
--# modify it under the terms of the GNU General Public License as
--# published by the Free Software Foundation; either version 2 of
--# the License, or (at your option) any later version.
--#
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
--# GNU General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
--# MA 02111-1307 USA
--#
--
--include $(TOPDIR)/config.mk
--
--LIB	:= $(obj)lib$(SOC).a
--
--COBJS	:= gpio.o
--SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
--OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
--
--all: $(obj).depend $(LIB)
--
--$(LIB): $(OBJS)
--	$(AR) $(ARFLAGS) $@ $^
--
--#########################################################################
--
--# defines $(obj).depend target
--include $(SRCTREE)/rules.mk
--
--sinclude $(obj).depend
--
--#########################################################################
-diff --git a/cpu/at32ap/at32ap7000/gpio.c b/cpu/at32ap/at32ap7000/gpio.c
-deleted file mode 100644
-index 52f5372..0000000
---- a/cpu/at32ap/at32ap7000/gpio.c
-+++ /dev/null
-@@ -1,137 +0,0 @@
--/*
-- * Copyright (C) 2006 Atmel Corporation
-- *
-- * See file CREDITS for list of people who contributed to this
-- * project.
-- *
-- * This program is free software; you can redistribute it and/or
-- * modify it under the terms of the GNU General Public License as
-- * published by the Free Software Foundation; either version 2 of
-- * the License, or (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-- * MA 02111-1307 USA
-- */
--#include <common.h>
--
--#include <asm/arch/gpio.h>
--
--/*
-- * Lots of small functions here. We depend on --gc-sections getting
-- * rid of the ones we don't need.
-- */
--void gpio_enable_ebi(void)
--{
--#ifdef CFG_HSDRAMC
--#ifndef CFG_SDRAM_16BIT
--	gpio_select_periph_A(GPIO_PIN_PE0, 0);
--	gpio_select_periph_A(GPIO_PIN_PE1, 0);
--	gpio_select_periph_A(GPIO_PIN_PE2, 0);
--	gpio_select_periph_A(GPIO_PIN_PE3, 0);
--	gpio_select_periph_A(GPIO_PIN_PE4, 0);
--	gpio_select_periph_A(GPIO_PIN_PE5, 0);
--	gpio_select_periph_A(GPIO_PIN_PE6, 0);
--	gpio_select_periph_A(GPIO_PIN_PE7, 0);
--	gpio_select_periph_A(GPIO_PIN_PE8, 0);
--	gpio_select_periph_A(GPIO_PIN_PE9, 0);
--	gpio_select_periph_A(GPIO_PIN_PE10, 0);
--	gpio_select_periph_A(GPIO_PIN_PE11, 0);
--	gpio_select_periph_A(GPIO_PIN_PE12, 0);
--	gpio_select_periph_A(GPIO_PIN_PE13, 0);
--	gpio_select_periph_A(GPIO_PIN_PE14, 0);
--	gpio_select_periph_A(GPIO_PIN_PE15, 0);
--#endif
--	gpio_select_periph_A(GPIO_PIN_PE26, 0);
--#endif
--}
--
--void gpio_enable_usart0(void)
--{
--	gpio_select_periph_B(GPIO_PIN_PA8, 0);
--	gpio_select_periph_B(GPIO_PIN_PA9, 0);
--}
--
--void gpio_enable_usart1(void)
--{
--	gpio_select_periph_A(GPIO_PIN_PA17, 0);
--	gpio_select_periph_A(GPIO_PIN_PA18, 0);
--}
--
--void gpio_enable_usart2(void)
--{
--	gpio_select_periph_B(GPIO_PIN_PB26, 0);
--	gpio_select_periph_B(GPIO_PIN_PB27, 0);
--}
--
--void gpio_enable_usart3(void)
--{
--	gpio_select_periph_B(GPIO_PIN_PB18, 0);
--	gpio_select_periph_B(GPIO_PIN_PB19, 0);
--}
--
--void gpio_enable_macb0(void)
--{
--	gpio_select_periph_A(GPIO_PIN_PC3,  0);	/* TXD0	*/
--	gpio_select_periph_A(GPIO_PIN_PC4,  0);	/* TXD1	*/
--	gpio_select_periph_A(GPIO_PIN_PC7,  0);	/* TXEN	*/
--	gpio_select_periph_A(GPIO_PIN_PC8,  0);	/* TXCK */
--	gpio_select_periph_A(GPIO_PIN_PC9,  0);	/* RXD0	*/
--	gpio_select_periph_A(GPIO_PIN_PC10, 0);	/* RXD1	*/
--	gpio_select_periph_A(GPIO_PIN_PC13, 0);	/* RXER	*/
--	gpio_select_periph_A(GPIO_PIN_PC15, 0);	/* RXDV	*/
--	gpio_select_periph_A(GPIO_PIN_PC16, 0);	/* MDC	*/
--	gpio_select_periph_A(GPIO_PIN_PC17, 0);	/* MDIO	*/
--#if !defined(CONFIG_RMII)
--	gpio_select_periph_A(GPIO_PIN_PC0,  0);	/* COL	*/
--	gpio_select_periph_A(GPIO_PIN_PC1,  0);	/* CRS	*/
--	gpio_select_periph_A(GPIO_PIN_PC2,  0);	/* TXER	*/
--	gpio_select_periph_A(GPIO_PIN_PC5,  0);	/* TXD2	*/
--	gpio_select_periph_A(GPIO_PIN_PC6,  0);	/* TXD3 */
--	gpio_select_periph_A(GPIO_PIN_PC11, 0);	/* RXD2	*/
--	gpio_select_periph_A(GPIO_PIN_PC12, 0);	/* RXD3	*/
--	gpio_select_periph_A(GPIO_PIN_PC14, 0);	/* RXCK	*/
--	gpio_select_periph_A(GPIO_PIN_PC18, 0);	/* SPD	*/
--#endif
--}
--
--void gpio_enable_macb1(void)
--{
--	gpio_select_periph_B(GPIO_PIN_PD13, 0);	/* TXD0	*/
--	gpio_select_periph_B(GPIO_PIN_PD14, 0);	/* TXD1	*/
--	gpio_select_periph_B(GPIO_PIN_PD11, 0);	/* TXEN	*/
--	gpio_select_periph_B(GPIO_PIN_PD12, 0);	/* TXCK */
--	gpio_select_periph_B(GPIO_PIN_PD10, 0);	/* RXD0	*/
--	gpio_select_periph_B(GPIO_PIN_PD6,  0);	/* RXD1	*/
--	gpio_select_periph_B(GPIO_PIN_PD5,  0);	/* RXER	*/
--	gpio_select_periph_B(GPIO_PIN_PD4,  0);	/* RXDV	*/
--	gpio_select_periph_B(GPIO_PIN_PD3,  0);	/* MDC	*/
--	gpio_select_periph_B(GPIO_PIN_PD2,  0);	/* MDIO	*/
--#if !defined(CONFIG_RMII)
--	gpio_select_periph_B(GPIO_PIN_PC19, 0);	/* COL	*/
--	gpio_select_periph_B(GPIO_PIN_PC23, 0);	/* CRS	*/
--	gpio_select_periph_B(GPIO_PIN_PC26, 0);	/* TXER	*/
--	gpio_select_periph_B(GPIO_PIN_PC27, 0);	/* TXD2	*/
--	gpio_select_periph_B(GPIO_PIN_PC28, 0);	/* TXD3 */
--	gpio_select_periph_B(GPIO_PIN_PC29, 0);	/* RXD2	*/
--	gpio_select_periph_B(GPIO_PIN_PC30, 0);	/* RXD3	*/
--	gpio_select_periph_B(GPIO_PIN_PC24, 0);	/* RXCK	*/
--	gpio_select_periph_B(GPIO_PIN_PD15, 0);	/* SPD	*/
--#endif
--}
--
--void gpio_enable_mmci(void)
--{
--	gpio_select_periph_A(GPIO_PIN_PA10, 0);	/* CLK	 */
--	gpio_select_periph_A(GPIO_PIN_PA11, 0);	/* CMD	 */
--	gpio_select_periph_A(GPIO_PIN_PA12, 0);	/* DATA0 */
--	gpio_select_periph_A(GPIO_PIN_PA13, 0);	/* DATA1 */
--	gpio_select_periph_A(GPIO_PIN_PA14, 0);	/* DATA2 */
--	gpio_select_periph_A(GPIO_PIN_PA15, 0);	/* DATA3 */
--}
-diff --git a/cpu/at32ap/at32ap700x/Makefile b/cpu/at32ap/at32ap700x/Makefile
-new file mode 100644
-index 0000000..d276712
---- /dev/null
-+++ b/cpu/at32ap/at32ap700x/Makefile
-@@ -0,0 +1,43 @@
-+#
-+# Copyright (C) 2005-2006 Atmel Corporation
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB	:= $(obj)lib$(SOC).a
-+
-+COBJS	:= gpio.o
-+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-+
-+all: $(obj).depend $(LIB)
-+
-+$(LIB): $(OBJS)
-+	$(AR) $(ARFLAGS) $@ $^
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
-diff --git a/cpu/at32ap/at32ap700x/gpio.c b/cpu/at32ap/at32ap700x/gpio.c
-new file mode 100644
-index 0000000..859124a
---- /dev/null
-+++ b/cpu/at32ap/at32ap700x/gpio.c
-@@ -0,0 +1,144 @@
-+/*
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#include <common.h>
-+
-+#include <asm/arch/chip-features.h>
-+#include <asm/arch/gpio.h>
-+
-+/*
-+ * Lots of small functions here. We depend on --gc-sections getting
-+ * rid of the ones we don't need.
-+ */
-+void gpio_enable_ebi(void)
-+{
-+#ifdef CFG_HSDRAMC
-+#ifndef CFG_SDRAM_16BIT
-+	gpio_select_periph_A(GPIO_PIN_PE0, 0);
-+	gpio_select_periph_A(GPIO_PIN_PE1, 0);
-+	gpio_select_periph_A(GPIO_PIN_PE2, 0);
-+	gpio_select_periph_A(GPIO_PIN_PE3, 0);
-+	gpio_select_periph_A(GPIO_PIN_PE4, 0);
-+	gpio_select_periph_A(GPIO_PIN_PE5, 0);
-+	gpio_select_periph_A(GPIO_PIN_PE6, 0);
-+	gpio_select_periph_A(GPIO_PIN_PE7, 0);
-+	gpio_select_periph_A(GPIO_PIN_PE8, 0);
-+	gpio_select_periph_A(GPIO_PIN_PE9, 0);
-+	gpio_select_periph_A(GPIO_PIN_PE10, 0);
-+	gpio_select_periph_A(GPIO_PIN_PE11, 0);
-+	gpio_select_periph_A(GPIO_PIN_PE12, 0);
-+	gpio_select_periph_A(GPIO_PIN_PE13, 0);
-+	gpio_select_periph_A(GPIO_PIN_PE14, 0);
-+	gpio_select_periph_A(GPIO_PIN_PE15, 0);
-+#endif
-+	gpio_select_periph_A(GPIO_PIN_PE26, 0);
-+#endif
-+}
-+
-+#ifdef AT32AP700x_CHIP_HAS_USART
-+void gpio_enable_usart0(void)
-+{
-+	gpio_select_periph_B(GPIO_PIN_PA8, 0);
-+	gpio_select_periph_B(GPIO_PIN_PA9, 0);
-+}
-+
-+void gpio_enable_usart1(void)
-+{
-+	gpio_select_periph_A(GPIO_PIN_PA17, 0);
-+	gpio_select_periph_A(GPIO_PIN_PA18, 0);
-+}
-+
-+void gpio_enable_usart2(void)
-+{
-+	gpio_select_periph_B(GPIO_PIN_PB26, 0);
-+	gpio_select_periph_B(GPIO_PIN_PB27, 0);
-+}
-+
-+void gpio_enable_usart3(void)
-+{
-+	gpio_select_periph_B(GPIO_PIN_PB17, 0);
-+	gpio_select_periph_B(GPIO_PIN_PB18, 0);
-+}
-+#endif
-+
-+#ifdef AT32AP700x_CHIP_HAS_MACB
-+void gpio_enable_macb0(void)
-+{
-+	gpio_select_periph_A(GPIO_PIN_PC3,  0);	/* TXD0	*/
-+	gpio_select_periph_A(GPIO_PIN_PC4,  0);	/* TXD1	*/
-+	gpio_select_periph_A(GPIO_PIN_PC7,  0);	/* TXEN	*/
-+	gpio_select_periph_A(GPIO_PIN_PC8,  0);	/* TXCK */
-+	gpio_select_periph_A(GPIO_PIN_PC9,  0);	/* RXD0	*/
-+	gpio_select_periph_A(GPIO_PIN_PC10, 0);	/* RXD1	*/
-+	gpio_select_periph_A(GPIO_PIN_PC13, 0);	/* RXER	*/
-+	gpio_select_periph_A(GPIO_PIN_PC15, 0);	/* RXDV	*/
-+	gpio_select_periph_A(GPIO_PIN_PC16, 0);	/* MDC	*/
-+	gpio_select_periph_A(GPIO_PIN_PC17, 0);	/* MDIO	*/
-+#if !defined(CONFIG_RMII)
-+	gpio_select_periph_A(GPIO_PIN_PC0,  0);	/* COL	*/
-+	gpio_select_periph_A(GPIO_PIN_PC1,  0);	/* CRS	*/
-+	gpio_select_periph_A(GPIO_PIN_PC2,  0);	/* TXER	*/
-+	gpio_select_periph_A(GPIO_PIN_PC5,  0);	/* TXD2	*/
-+	gpio_select_periph_A(GPIO_PIN_PC6,  0);	/* TXD3 */
-+	gpio_select_periph_A(GPIO_PIN_PC11, 0);	/* RXD2	*/
-+	gpio_select_periph_A(GPIO_PIN_PC12, 0);	/* RXD3	*/
-+	gpio_select_periph_A(GPIO_PIN_PC14, 0);	/* RXCK	*/
-+	gpio_select_periph_A(GPIO_PIN_PC18, 0);	/* SPD	*/
-+#endif
-+}
-+
-+void gpio_enable_macb1(void)
-+{
-+	gpio_select_periph_B(GPIO_PIN_PD13, 0);	/* TXD0	*/
-+	gpio_select_periph_B(GPIO_PIN_PD14, 0);	/* TXD1	*/
-+	gpio_select_periph_B(GPIO_PIN_PD11, 0);	/* TXEN	*/
-+	gpio_select_periph_B(GPIO_PIN_PD12, 0);	/* TXCK */
-+	gpio_select_periph_B(GPIO_PIN_PD10, 0);	/* RXD0	*/
-+	gpio_select_periph_B(GPIO_PIN_PD6,  0);	/* RXD1	*/
-+	gpio_select_periph_B(GPIO_PIN_PD5,  0);	/* RXER	*/
-+	gpio_select_periph_B(GPIO_PIN_PD4,  0);	/* RXDV	*/
-+	gpio_select_periph_B(GPIO_PIN_PD3,  0);	/* MDC	*/
-+	gpio_select_periph_B(GPIO_PIN_PD2,  0);	/* MDIO	*/
-+#if !defined(CONFIG_RMII)
-+	gpio_select_periph_B(GPIO_PIN_PC19, 0);	/* COL	*/
-+	gpio_select_periph_B(GPIO_PIN_PC23, 0);	/* CRS	*/
-+	gpio_select_periph_B(GPIO_PIN_PC26, 0);	/* TXER	*/
-+	gpio_select_periph_B(GPIO_PIN_PC27, 0);	/* TXD2	*/
-+	gpio_select_periph_B(GPIO_PIN_PC28, 0);	/* TXD3 */
-+	gpio_select_periph_B(GPIO_PIN_PC29, 0);	/* RXD2	*/
-+	gpio_select_periph_B(GPIO_PIN_PC30, 0);	/* RXD3	*/
-+	gpio_select_periph_B(GPIO_PIN_PC24, 0);	/* RXCK	*/
-+	gpio_select_periph_B(GPIO_PIN_PD15, 0);	/* SPD	*/
-+#endif
-+}
-+#endif
-+
-+#ifdef AT32AP700x_CHIP_HAS_MMCI
-+void gpio_enable_mmci(void)
-+{
-+	gpio_select_periph_A(GPIO_PIN_PA10, 0);	/* CLK	 */
-+	gpio_select_periph_A(GPIO_PIN_PA11, 0);	/* CMD	 */
-+	gpio_select_periph_A(GPIO_PIN_PA12, 0);	/* DATA0 */
-+	gpio_select_periph_A(GPIO_PIN_PA13, 0);	/* DATA1 */
-+	gpio_select_periph_A(GPIO_PIN_PA14, 0);	/* DATA2 */
-+	gpio_select_periph_A(GPIO_PIN_PA15, 0);	/* DATA3 */
-+}
-+#endif
-diff --git a/cpu/at32ap/atmel_mci.c b/cpu/at32ap/atmel_mci.c
-index cf48be1..f59dfb5 100644
---- a/cpu/at32ap/atmel_mci.c
-+++ b/cpu/at32ap/atmel_mci.c
-@@ -198,11 +198,11 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
- 
- 	/* Put the device into Transfer state */
- 	ret = mmc_cmd(MMC_CMD_SELECT_CARD, mmc_rca << 16, resp, R1 | NCR);
--	if (ret) goto fail;
-+	if (ret) goto out;
- 
- 	/* Set block length */
- 	ret = mmc_cmd(MMC_CMD_SET_BLOCKLEN, mmc_blkdev.blksz, resp, R1 | NCR);
--	if (ret) goto fail;
-+	if (ret) goto out;
- 
- 	pr_debug("MCI_DTOR = %08lx\n", mmci_readl(DTOR));
- 
-@@ -211,7 +211,7 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
- 			      start * mmc_blkdev.blksz, resp,
- 			      (R1 | NCR | TRCMD_START | TRDIR_READ
- 			       | TRTYP_BLOCK));
--		if (ret) goto fail;
-+		if (ret) goto out;
- 
- 		ret = -EIO;
- 		wordcount = 0;
-@@ -219,7 +219,7 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
- 			do {
- 				status = mmci_readl(SR);
- 				if (status & (ERROR_FLAGS | MMCI_BIT(OVRE)))
--					goto fail;
-+					goto read_error;
- 			} while (!(status & MMCI_BIT(RXRDY)));
- 
- 			if (status & MMCI_BIT(RXRDY)) {
-@@ -244,9 +244,10 @@ out:
- 	mmc_cmd(MMC_CMD_SELECT_CARD, 0, resp, NCR);
- 	return i;
- 
--fail:
-+read_error:
- 	mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, R1 | NCR);
--	printf("mmc: bread failed, card status = %08x\n", card_status);
-+	printf("mmc: bread failed, status = %08x, card status = %08x\n",
-+	       status, card_status);
- 	goto out;
- }
- 
-diff --git a/include/asm-avr32/arch-at32ap7000/clk.h b/include/asm-avr32/arch-at32ap7000/clk.h
-deleted file mode 100644
-index 7e20d97..0000000
---- a/include/asm-avr32/arch-at32ap7000/clk.h
-+++ /dev/null
-@@ -1,70 +0,0 @@
--/*
-- * Copyright (C) 2006 Atmel Corporation
-- *
-- * See file CREDITS for list of people who contributed to this
-- * project.
-- *
-- * This program is free software; you can redistribute it and/or
-- * modify it under the terms of the GNU General Public License as
-- * published by the Free Software Foundation; either version 2 of
-- * the License, or (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-- * MA 02111-1307 USA
-- */
--#ifndef __ASM_AVR32_ARCH_CLK_H__
--#define __ASM_AVR32_ARCH_CLK_H__
--
--#ifdef CONFIG_PLL
--#define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL)
--#else
--#define MAIN_CLK_RATE (CFG_OSC0_HZ)
--#endif
--
--static inline unsigned long get_cpu_clk_rate(void)
--{
--	return MAIN_CLK_RATE >> CFG_CLKDIV_CPU;
--}
--static inline unsigned long get_hsb_clk_rate(void)
--{
--	return MAIN_CLK_RATE >> CFG_CLKDIV_HSB;
--}
--static inline unsigned long get_pba_clk_rate(void)
--{
--	return MAIN_CLK_RATE >> CFG_CLKDIV_PBA;
--}
--static inline unsigned long get_pbb_clk_rate(void)
--{
--	return MAIN_CLK_RATE >> CFG_CLKDIV_PBB;
--}
--
--/* Accessors for specific devices. More will be added as needed. */
--static inline unsigned long get_sdram_clk_rate(void)
--{
--	return get_hsb_clk_rate();
--}
--static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
--{
--	return get_pba_clk_rate();
--}
--static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
--{
--	return get_pbb_clk_rate();
--}
--static inline unsigned long get_macb_hclk_rate(unsigned int dev_id)
--{
--	return get_hsb_clk_rate();
--}
--static inline unsigned long get_mci_clk_rate(void)
--{
--	return get_pbb_clk_rate();
--}
--
--#endif /* __ASM_AVR32_ARCH_CLK_H__ */
-diff --git a/include/asm-avr32/arch-at32ap7000/gpio.h b/include/asm-avr32/arch-at32ap7000/gpio.h
-deleted file mode 100644
-index e4812d4..0000000
---- a/include/asm-avr32/arch-at32ap7000/gpio.h
-+++ /dev/null
-@@ -1,212 +0,0 @@
--/*
-- * Copyright (C) 2006 Atmel Corporation
-- *
-- * See file CREDITS for list of people who contributed to this
-- * project.
-- *
-- * This program is free software; you can redistribute it and/or
-- * modify it under the terms of the GNU General Public License as
-- * published by the Free Software Foundation; either version 2 of
-- * the License, or (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-- * MA 02111-1307 USA
-- */
--#ifndef __ASM_AVR32_ARCH_GPIO_H__
--#define __ASM_AVR32_ARCH_GPIO_H__
--
--#include <asm/arch/memory-map.h>
--
--#define NR_GPIO_CONTROLLERS	5
--
--/*
-- * Pin numbers identifying specific GPIO pins on the chip.
-- */
--#define GPIO_PIOA_BASE	(0)
--#define GPIO_PIN_PA0	(GPIO_PIOA_BASE +  0)
--#define GPIO_PIN_PA1	(GPIO_PIOA_BASE +  1)
--#define GPIO_PIN_PA2	(GPIO_PIOA_BASE +  2)
--#define GPIO_PIN_PA3	(GPIO_PIOA_BASE +  3)
--#define GPIO_PIN_PA4	(GPIO_PIOA_BASE +  4)
--#define GPIO_PIN_PA5	(GPIO_PIOA_BASE +  5)
--#define GPIO_PIN_PA6	(GPIO_PIOA_BASE +  6)
--#define GPIO_PIN_PA7	(GPIO_PIOA_BASE +  7)
--#define GPIO_PIN_PA8	(GPIO_PIOA_BASE +  8)
--#define GPIO_PIN_PA9	(GPIO_PIOA_BASE +  9)
--#define GPIO_PIN_PA10	(GPIO_PIOA_BASE + 10)
--#define GPIO_PIN_PA11	(GPIO_PIOA_BASE + 11)
--#define GPIO_PIN_PA12	(GPIO_PIOA_BASE + 12)
--#define GPIO_PIN_PA13	(GPIO_PIOA_BASE + 13)
--#define GPIO_PIN_PA14	(GPIO_PIOA_BASE + 14)
--#define GPIO_PIN_PA15	(GPIO_PIOA_BASE + 15)
--#define GPIO_PIN_PA16	(GPIO_PIOA_BASE + 16)
--#define GPIO_PIN_PA17	(GPIO_PIOA_BASE + 17)
--#define GPIO_PIN_PA18	(GPIO_PIOA_BASE + 18)
--#define GPIO_PIN_PA19	(GPIO_PIOA_BASE + 19)
--#define GPIO_PIN_PA20	(GPIO_PIOA_BASE + 20)
--#define GPIO_PIN_PA21	(GPIO_PIOA_BASE + 21)
--#define GPIO_PIN_PA22	(GPIO_PIOA_BASE + 22)
--#define GPIO_PIN_PA23	(GPIO_PIOA_BASE + 23)
--#define GPIO_PIN_PA24	(GPIO_PIOA_BASE + 24)
--#define GPIO_PIN_PA25	(GPIO_PIOA_BASE + 25)
--#define GPIO_PIN_PA26	(GPIO_PIOA_BASE + 26)
--#define GPIO_PIN_PA27	(GPIO_PIOA_BASE + 27)
--#define GPIO_PIN_PA28	(GPIO_PIOA_BASE + 28)
--#define GPIO_PIN_PA29	(GPIO_PIOA_BASE + 29)
--#define GPIO_PIN_PA30	(GPIO_PIOA_BASE + 30)
--#define GPIO_PIN_PA31	(GPIO_PIOA_BASE + 31)
--
--#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
--#define GPIO_PIN_PB0	(GPIO_PIOB_BASE +  0)
--#define GPIO_PIN_PB1	(GPIO_PIOB_BASE +  1)
--#define GPIO_PIN_PB2	(GPIO_PIOB_BASE +  2)
--#define GPIO_PIN_PB3	(GPIO_PIOB_BASE +  3)
--#define GPIO_PIN_PB4	(GPIO_PIOB_BASE +  4)
--#define GPIO_PIN_PB5	(GPIO_PIOB_BASE +  5)
--#define GPIO_PIN_PB6	(GPIO_PIOB_BASE +  6)
--#define GPIO_PIN_PB7	(GPIO_PIOB_BASE +  7)
--#define GPIO_PIN_PB8	(GPIO_PIOB_BASE +  8)
--#define GPIO_PIN_PB9	(GPIO_PIOB_BASE +  9)
--#define GPIO_PIN_PB10	(GPIO_PIOB_BASE + 10)
--#define GPIO_PIN_PB11	(GPIO_PIOB_BASE + 11)
--#define GPIO_PIN_PB12	(GPIO_PIOB_BASE + 12)
--#define GPIO_PIN_PB13	(GPIO_PIOB_BASE + 13)
--#define GPIO_PIN_PB14	(GPIO_PIOB_BASE + 14)
--#define GPIO_PIN_PB15	(GPIO_PIOB_BASE + 15)
--#define GPIO_PIN_PB16	(GPIO_PIOB_BASE + 16)
--#define GPIO_PIN_PB17	(GPIO_PIOB_BASE + 17)
--#define GPIO_PIN_PB18	(GPIO_PIOB_BASE + 18)
--#define GPIO_PIN_PB19	(GPIO_PIOB_BASE + 19)
--#define GPIO_PIN_PB20	(GPIO_PIOB_BASE + 20)
--#define GPIO_PIN_PB21	(GPIO_PIOB_BASE + 21)
--#define GPIO_PIN_PB22	(GPIO_PIOB_BASE + 22)
--#define GPIO_PIN_PB23	(GPIO_PIOB_BASE + 23)
--#define GPIO_PIN_PB24	(GPIO_PIOB_BASE + 24)
--#define GPIO_PIN_PB25	(GPIO_PIOB_BASE + 25)
--#define GPIO_PIN_PB26	(GPIO_PIOB_BASE + 26)
--#define GPIO_PIN_PB27	(GPIO_PIOB_BASE + 27)
--#define GPIO_PIN_PB28	(GPIO_PIOB_BASE + 28)
--#define GPIO_PIN_PB29	(GPIO_PIOB_BASE + 29)
--#define GPIO_PIN_PB30	(GPIO_PIOB_BASE + 30)
--
--#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
--#define GPIO_PIN_PC0	(GPIO_PIOC_BASE +  0)
--#define GPIO_PIN_PC1	(GPIO_PIOC_BASE +  1)
--#define GPIO_PIN_PC2	(GPIO_PIOC_BASE +  2)
--#define GPIO_PIN_PC3	(GPIO_PIOC_BASE +  3)
--#define GPIO_PIN_PC4	(GPIO_PIOC_BASE +  4)
--#define GPIO_PIN_PC5	(GPIO_PIOC_BASE +  5)
--#define GPIO_PIN_PC6	(GPIO_PIOC_BASE +  6)
--#define GPIO_PIN_PC7	(GPIO_PIOC_BASE +  7)
--#define GPIO_PIN_PC8	(GPIO_PIOC_BASE +  8)
--#define GPIO_PIN_PC9	(GPIO_PIOC_BASE +  9)
--#define GPIO_PIN_PC10	(GPIO_PIOC_BASE + 10)
--#define GPIO_PIN_PC11	(GPIO_PIOC_BASE + 11)
--#define GPIO_PIN_PC12	(GPIO_PIOC_BASE + 12)
--#define GPIO_PIN_PC13	(GPIO_PIOC_BASE + 13)
--#define GPIO_PIN_PC14	(GPIO_PIOC_BASE + 14)
--#define GPIO_PIN_PC15	(GPIO_PIOC_BASE + 15)
--#define GPIO_PIN_PC16	(GPIO_PIOC_BASE + 16)
--#define GPIO_PIN_PC17	(GPIO_PIOC_BASE + 17)
--#define GPIO_PIN_PC18	(GPIO_PIOC_BASE + 18)
--#define GPIO_PIN_PC19	(GPIO_PIOC_BASE + 19)
--#define GPIO_PIN_PC20	(GPIO_PIOC_BASE + 20)
--#define GPIO_PIN_PC21	(GPIO_PIOC_BASE + 21)
--#define GPIO_PIN_PC22	(GPIO_PIOC_BASE + 22)
--#define GPIO_PIN_PC23	(GPIO_PIOC_BASE + 23)
--#define GPIO_PIN_PC24	(GPIO_PIOC_BASE + 24)
--#define GPIO_PIN_PC25	(GPIO_PIOC_BASE + 25)
--#define GPIO_PIN_PC26	(GPIO_PIOC_BASE + 26)
--#define GPIO_PIN_PC27	(GPIO_PIOC_BASE + 27)
--#define GPIO_PIN_PC28	(GPIO_PIOC_BASE + 28)
--#define GPIO_PIN_PC29	(GPIO_PIOC_BASE + 29)
--#define GPIO_PIN_PC30	(GPIO_PIOC_BASE + 30)
--#define GPIO_PIN_PC31	(GPIO_PIOC_BASE + 31)
--
--#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
--#define GPIO_PIN_PD0	(GPIO_PIOD_BASE +  0)
--#define GPIO_PIN_PD1	(GPIO_PIOD_BASE +  1)
--#define GPIO_PIN_PD2	(GPIO_PIOD_BASE +  2)
--#define GPIO_PIN_PD3	(GPIO_PIOD_BASE +  3)
--#define GPIO_PIN_PD4	(GPIO_PIOD_BASE +  4)
--#define GPIO_PIN_PD5	(GPIO_PIOD_BASE +  5)
--#define GPIO_PIN_PD6	(GPIO_PIOD_BASE +  6)
--#define GPIO_PIN_PD7	(GPIO_PIOD_BASE +  7)
--#define GPIO_PIN_PD8	(GPIO_PIOD_BASE +  8)
--#define GPIO_PIN_PD9	(GPIO_PIOD_BASE +  9)
--#define GPIO_PIN_PD10	(GPIO_PIOD_BASE + 10)
--#define GPIO_PIN_PD11	(GPIO_PIOD_BASE + 11)
--#define GPIO_PIN_PD12	(GPIO_PIOD_BASE + 12)
--#define GPIO_PIN_PD13	(GPIO_PIOD_BASE + 13)
--#define GPIO_PIN_PD14	(GPIO_PIOD_BASE + 14)
--#define GPIO_PIN_PD15	(GPIO_PIOD_BASE + 15)
--#define GPIO_PIN_PD16	(GPIO_PIOD_BASE + 16)
--#define GPIO_PIN_PD17	(GPIO_PIOD_BASE + 17)
--
--#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
--#define GPIO_PIN_PE0	(GPIO_PIOE_BASE +  0)
--#define GPIO_PIN_PE1	(GPIO_PIOE_BASE +  1)
--#define GPIO_PIN_PE2	(GPIO_PIOE_BASE +  2)
--#define GPIO_PIN_PE3	(GPIO_PIOE_BASE +  3)
--#define GPIO_PIN_PE4	(GPIO_PIOE_BASE +  4)
--#define GPIO_PIN_PE5	(GPIO_PIOE_BASE +  5)
--#define GPIO_PIN_PE6	(GPIO_PIOE_BASE +  6)
--#define GPIO_PIN_PE7	(GPIO_PIOE_BASE +  7)
--#define GPIO_PIN_PE8	(GPIO_PIOE_BASE +  8)
--#define GPIO_PIN_PE9	(GPIO_PIOE_BASE +  9)
--#define GPIO_PIN_PE10	(GPIO_PIOE_BASE + 10)
--#define GPIO_PIN_PE11	(GPIO_PIOE_BASE + 11)
--#define GPIO_PIN_PE12	(GPIO_PIOE_BASE + 12)
--#define GPIO_PIN_PE13	(GPIO_PIOE_BASE + 13)
--#define GPIO_PIN_PE14	(GPIO_PIOE_BASE + 14)
--#define GPIO_PIN_PE15	(GPIO_PIOE_BASE + 15)
--#define GPIO_PIN_PE16	(GPIO_PIOE_BASE + 16)
--#define GPIO_PIN_PE17	(GPIO_PIOE_BASE + 17)
--#define GPIO_PIN_PE18	(GPIO_PIOE_BASE + 18)
--#define GPIO_PIN_PE19	(GPIO_PIOE_BASE + 19)
--#define GPIO_PIN_PE20	(GPIO_PIOE_BASE + 20)
--#define GPIO_PIN_PE21	(GPIO_PIOE_BASE + 21)
--#define GPIO_PIN_PE22	(GPIO_PIOE_BASE + 22)
--#define GPIO_PIN_PE23	(GPIO_PIOE_BASE + 23)
--#define GPIO_PIN_PE24	(GPIO_PIOE_BASE + 24)
--#define GPIO_PIN_PE25	(GPIO_PIOE_BASE + 25)
--#define GPIO_PIN_PE26	(GPIO_PIOE_BASE + 26)
--
--static inline void *gpio_pin_to_addr(unsigned int pin)
--{
--	switch (pin >> 5) {
--	case 0:
--		return (void *)PIOA_BASE;
--	case 1:
--		return (void *)PIOB_BASE;
--	case 2:
--		return (void *)PIOC_BASE;
--	case 3:
--		return (void *)PIOD_BASE;
--	case 4:
--		return (void *)PIOE_BASE;
--	default:
--		return NULL;
--	}
--}
--
--void gpio_select_periph_A(unsigned int pin, int use_pullup);
--void gpio_select_periph_B(unsigned int pin, int use_pullup);
--
--void gpio_enable_ebi(void);
--void gpio_enable_usart0(void);
--void gpio_enable_usart1(void);
--void gpio_enable_usart2(void);
--void gpio_enable_usart3(void);
--void gpio_enable_macb0(void);
--void gpio_enable_macb1(void);
--void gpio_enable_mmci(void);
--
--#endif /* __ASM_AVR32_ARCH_GPIO_H__ */
-diff --git a/include/asm-avr32/arch-at32ap7000/hmatrix2.h b/include/asm-avr32/arch-at32ap7000/hmatrix2.h
-deleted file mode 100644
-index b0e787a..0000000
---- a/include/asm-avr32/arch-at32ap7000/hmatrix2.h
-+++ /dev/null
-@@ -1,232 +0,0 @@
--/*
-- * Register definition for the High-speed Bus Matrix
-- */
--#ifndef __ASM_AVR32_HMATRIX2_H__
--#define __ASM_AVR32_HMATRIX2_H__
--
--/* HMATRIX2 register offsets */
--#define HMATRIX2_MCFG0				0x0000
--#define HMATRIX2_MCFG1				0x0004
--#define HMATRIX2_MCFG2				0x0008
--#define HMATRIX2_MCFG3				0x000c
--#define HMATRIX2_MCFG4				0x0010
--#define HMATRIX2_MCFG5				0x0014
--#define HMATRIX2_MCFG6				0x0018
--#define HMATRIX2_MCFG7				0x001c
--#define HMATRIX2_MCFG8				0x0020
--#define HMATRIX2_MCFG9				0x0024
--#define HMATRIX2_MCFG10				0x0028
--#define HMATRIX2_MCFG11				0x002c
--#define HMATRIX2_MCFG12				0x0030
--#define HMATRIX2_MCFG13				0x0034
--#define HMATRIX2_MCFG14				0x0038
--#define HMATRIX2_MCFG15				0x003c
--#define HMATRIX2_SCFG0				0x0040
--#define HMATRIX2_SCFG1				0x0044
--#define HMATRIX2_SCFG2				0x0048
--#define HMATRIX2_SCFG3				0x004c
--#define HMATRIX2_SCFG4				0x0050
--#define HMATRIX2_SCFG5				0x0054
--#define HMATRIX2_SCFG6				0x0058
--#define HMATRIX2_SCFG7				0x005c
--#define HMATRIX2_SCFG8				0x0060
--#define HMATRIX2_SCFG9				0x0064
--#define HMATRIX2_SCFG10				0x0068
--#define HMATRIX2_SCFG11				0x006c
--#define HMATRIX2_SCFG12				0x0070
--#define HMATRIX2_SCFG13				0x0074
--#define HMATRIX2_SCFG14				0x0078
--#define HMATRIX2_SCFG15				0x007c
--#define HMATRIX2_PRAS0				0x0080
--#define HMATRIX2_PRBS0				0x0084
--#define HMATRIX2_PRAS1				0x0088
--#define HMATRIX2_PRBS1				0x008c
--#define HMATRIX2_PRAS2				0x0090
--#define HMATRIX2_PRBS2				0x0094
--#define HMATRIX2_PRAS3				0x0098
--#define HMATRIX2_PRBS3				0x009c
--#define HMATRIX2_PRAS4				0x00a0
--#define HMATRIX2_PRBS4				0x00a4
--#define HMATRIX2_PRAS5				0x00a8
--#define HMATRIX2_PRBS5				0x00ac
--#define HMATRIX2_PRAS6				0x00b0
--#define HMATRIX2_PRBS6				0x00b4
--#define HMATRIX2_PRAS7				0x00b8
--#define HMATRIX2_PRBS7				0x00bc
--#define HMATRIX2_PRAS8				0x00c0
--#define HMATRIX2_PRBS8				0x00c4
--#define HMATRIX2_PRAS9				0x00c8
--#define HMATRIX2_PRBS9				0x00cc
--#define HMATRIX2_PRAS10				0x00d0
--#define HMATRIX2_PRBS10				0x00d4
--#define HMATRIX2_PRAS11				0x00d8
--#define HMATRIX2_PRBS11				0x00dc
--#define HMATRIX2_PRAS12				0x00e0
--#define HMATRIX2_PRBS12				0x00e4
--#define HMATRIX2_PRAS13				0x00e8
--#define HMATRIX2_PRBS13				0x00ec
--#define HMATRIX2_PRAS14				0x00f0
--#define HMATRIX2_PRBS14				0x00f4
--#define HMATRIX2_PRAS15				0x00f8
--#define HMATRIX2_PRBS15				0x00fc
--#define HMATRIX2_MRCR				0x0100
--#define HMATRIX2_SFR0				0x0110
--#define HMATRIX2_SFR1				0x0114
--#define HMATRIX2_SFR2				0x0118
--#define HMATRIX2_SFR3				0x011c
--#define HMATRIX2_SFR4				0x0120
--#define HMATRIX2_SFR5				0x0124
--#define HMATRIX2_SFR6				0x0128
--#define HMATRIX2_SFR7				0x012c
--#define HMATRIX2_SFR8				0x0130
--#define HMATRIX2_SFR9				0x0134
--#define HMATRIX2_SFR10				0x0138
--#define HMATRIX2_SFR11				0x013c
--#define HMATRIX2_SFR12				0x0140
--#define HMATRIX2_SFR13				0x0144
--#define HMATRIX2_SFR14				0x0148
--#define HMATRIX2_SFR15				0x014c
--#define HMATRIX2_VERSION			0x01fc
--
--/* Bitfields in MCFG0 */
--#define HMATRIX2_ULBT_OFFSET			0
--#define HMATRIX2_ULBT_SIZE			3
--
--/* Bitfields in SCFG0 */
--#define HMATRIX2_SLOT_CYCLE_OFFSET		0
--#define HMATRIX2_SLOT_CYCLE_SIZE		8
--#define HMATRIX2_DEFMSTR_TYPE_OFFSET		16
--#define HMATRIX2_DEFMSTR_TYPE_SIZE		2
--#define HMATRIX2_FIXED_DEFMSTR_OFFSET		18
--#define HMATRIX2_FIXED_DEFMSTR_SIZE		4
--#define HMATRIX2_ARBT_OFFSET			24
--#define HMATRIX2_ARBT_SIZE			2
--
--/* Bitfields in PRAS0 */
--#define HMATRIX2_M0PR_OFFSET			0
--#define HMATRIX2_M0PR_SIZE			4
--#define HMATRIX2_M1PR_OFFSET			4
--#define HMATRIX2_M1PR_SIZE			4
--#define HMATRIX2_M2PR_OFFSET			8
--#define HMATRIX2_M2PR_SIZE			4
--#define HMATRIX2_M3PR_OFFSET			12
--#define HMATRIX2_M3PR_SIZE			4
--#define HMATRIX2_M4PR_OFFSET			16
--#define HMATRIX2_M4PR_SIZE			4
--#define HMATRIX2_M5PR_OFFSET			20
--#define HMATRIX2_M5PR_SIZE			4
--#define HMATRIX2_M6PR_OFFSET			24
--#define HMATRIX2_M6PR_SIZE			4
--#define HMATRIX2_M7PR_OFFSET			28
--#define HMATRIX2_M7PR_SIZE			4
--
--/* Bitfields in PRBS0 */
--#define HMATRIX2_M8PR_OFFSET			0
--#define HMATRIX2_M8PR_SIZE			4
--#define HMATRIX2_M9PR_OFFSET			4
--#define HMATRIX2_M9PR_SIZE			4
--#define HMATRIX2_M10PR_OFFSET			8
--#define HMATRIX2_M10PR_SIZE			4
--#define HMATRIX2_M11PR_OFFSET			12
--#define HMATRIX2_M11PR_SIZE			4
--#define HMATRIX2_M12PR_OFFSET			16
--#define HMATRIX2_M12PR_SIZE			4
--#define HMATRIX2_M13PR_OFFSET			20
--#define HMATRIX2_M13PR_SIZE			4
--#define HMATRIX2_M14PR_OFFSET			24
--#define HMATRIX2_M14PR_SIZE			4
--#define HMATRIX2_M15PR_OFFSET			28
--#define HMATRIX2_M15PR_SIZE			4
--
--/* Bitfields in MRCR */
--#define HMATRIX2_RBC0_OFFSET			0
--#define HMATRIX2_RBC0_SIZE			1
--#define HMATRIX2_RBC1_OFFSET			1
--#define HMATRIX2_RBC1_SIZE			1
--#define HMATRIX2_RBC2_OFFSET			2
--#define HMATRIX2_RBC2_SIZE			1
--#define HMATRIX2_RBC3_OFFSET			3
--#define HMATRIX2_RBC3_SIZE			1
--#define HMATRIX2_RBC4_OFFSET			4
--#define HMATRIX2_RBC4_SIZE			1
--#define HMATRIX2_RBC5_OFFSET			5
--#define HMATRIX2_RBC5_SIZE			1
--#define HMATRIX2_RBC6_OFFSET			6
--#define HMATRIX2_RBC6_SIZE			1
--#define HMATRIX2_RBC7_OFFSET			7
--#define HMATRIX2_RBC7_SIZE			1
--#define HMATRIX2_RBC8_OFFSET			8
--#define HMATRIX2_RBC8_SIZE			1
--#define HMATRIX2_RBC9_OFFSET			9
--#define HMATRIX2_RBC9_SIZE			1
--#define HMATRIX2_RBC10_OFFSET			10
--#define HMATRIX2_RBC10_SIZE			1
--#define HMATRIX2_RBC11_OFFSET			11
--#define HMATRIX2_RBC11_SIZE			1
--#define HMATRIX2_RBC12_OFFSET			12
--#define HMATRIX2_RBC12_SIZE			1
--#define HMATRIX2_RBC13_OFFSET			13
--#define HMATRIX2_RBC13_SIZE			1
--#define HMATRIX2_RBC14_OFFSET			14
--#define HMATRIX2_RBC14_SIZE			1
--#define HMATRIX2_RBC15_OFFSET			15
--#define HMATRIX2_RBC15_SIZE			1
--
--/* Bitfields in SFR0 */
--#define HMATRIX2_SFR_OFFSET			0
--#define HMATRIX2_SFR_SIZE			32
--
--/* Bitfields in SFR4 */
--#define HMATRIX2_CS1A_OFFSET			1
--#define HMATRIX2_CS1A_SIZE			1
--#define HMATRIX2_CS3A_OFFSET			3
--#define HMATRIX2_CS3A_SIZE			1
--#define HMATRIX2_CS4A_OFFSET			4
--#define HMATRIX2_CS4A_SIZE			1
--#define HMATRIX2_CS5A_OFFSET			5
--#define HMATRIX2_CS5A_SIZE			1
--#define HMATRIX2_DBPUC_OFFSET			8
--#define HMATRIX2_DBPUC_SIZE			1
--
--/* Bitfields in VERSION */
--#define HMATRIX2_VERSION_OFFSET			0
--#define HMATRIX2_VERSION_SIZE			12
--#define HMATRIX2_MFN_OFFSET			16
--#define HMATRIX2_MFN_SIZE			3
--
--/* Constants for ULBT */
--#define HMATRIX2_ULBT_INFINITE			0
--#define HMATRIX2_ULBT_SINGLE			1
--#define HMATRIX2_ULBT_FOUR_BEAT			2
--#define HMATRIX2_ULBT_SIXTEEN_BEAT		4
--
--/* Constants for DEFMSTR_TYPE */
--#define HMATRIX2_DEFMSTR_TYPE_NO_DEFAULT	0
--#define HMATRIX2_DEFMSTR_TYPE_LAST_DEFAULT	1
--#define HMATRIX2_DEFMSTR_TYPE_FIXED_DEFAULT	2
--
--/* Constants for ARBT */
--#define HMATRIX2_ARBT_ROUND_ROBIN		0
--#define HMATRIX2_ARBT_FIXED_PRIORITY		1
--
--/* Bit manipulation macros */
--#define HMATRIX2_BIT(name)					\
--	(1 << HMATRIX2_##name##_OFFSET)
--#define HMATRIX2_BF(name,value)					\
--	(((value) & ((1 << HMATRIX2_##name##_SIZE) - 1))	\
--	 << HMATRIX2_##name##_OFFSET)
--#define HMATRIX2_BFEXT(name,value)				\
--	(((value) >> HMATRIX2_##name##_OFFSET)			\
--	 & ((1 << HMATRIX2_##name##_SIZE) - 1))
--#define HMATRIX2_BFINS(name,value,old)				\
--	(((old) & ~(((1 << HMATRIX2_##name##_SIZE) - 1)		\
--		    << HMATRIX2_##name##_OFFSET))		\
--	 | HMATRIX2_BF(name,value))
--
--/* Register access macros */
--#define hmatrix2_readl(reg)					\
--	readl((void *)HMATRIX_BASE + HMATRIX2_##reg)
--#define hmatrix2_writel(reg,value)				\
--	writel((value), (void *)HMATRIX_BASE + HMATRIX2_##reg)
--
--#endif /* __ASM_AVR32_HMATRIX2_H__ */
-diff --git a/include/asm-avr32/arch-at32ap7000/memory-map.h b/include/asm-avr32/arch-at32ap7000/memory-map.h
-deleted file mode 100644
-index 5513e88..0000000
---- a/include/asm-avr32/arch-at32ap7000/memory-map.h
-+++ /dev/null
-@@ -1,66 +0,0 @@
--/*
-- * Copyright (C) 2005-2006 Atmel Corporation
-- *
-- * See file CREDITS for list of people who contributed to this
-- * project.
-- *
-- * This program is free software; you can redistribute it and/or
-- * modify it under the terms of the GNU General Public License as
-- * published by the Free Software Foundation; either version 2 of
-- * the License, or (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-- * MA 02111-1307 USA
-- */
--#ifndef __AT32AP7000_MEMORY_MAP_H__
--#define __AT32AP7000_MEMORY_MAP_H__
--
--/* Devices on the High Speed Bus (HSB) */
--#define LCDC_BASE				0xFF000000
--#define DMAC_BASE				0xFF200000
--#define USB_FIFO				0xFF300000
--
--/* Devices on Peripheral Bus A (PBA) */
--#define SPI0_BASE				0xFFE00000
--#define SPI1_BASE				0xFFE00400
--#define TWI_BASE				0xFFE00800
--#define USART0_BASE				0xFFE00C00
--#define USART1_BASE				0xFFE01000
--#define USART2_BASE				0xFFE01400
--#define USART3_BASE				0xFFE01800
--#define SSC0_BASE				0xFFE01C00
--#define SSC1_BASE				0xFFE02000
--#define SSC2_BASE				0xFFE02400
--#define PIOA_BASE				0xFFE02800
--#define PIOB_BASE				0xFFE02C00
--#define PIOC_BASE				0xFFE03000
--#define PIOD_BASE				0xFFE03400
--#define PIOE_BASE				0xFFE03800
--#define PSIF_BASE				0xFFE03C00
--
--/* Devices on Peripheral Bus B (PBB) */
--#define SM_BASE					0xFFF00000
--#define INTC_BASE				0xFFF00400
--#define HMATRIX_BASE				0xFFF00800
--#define TIMER0_BASE				0xFFF00C00
--#define TIMER1_BASE				0xFFF01000
--#define PWM_BASE				0xFFF01400
--#define MACB0_BASE				0xFFF01800
--#define MACB1_BASE				0xFFF01C00
--#define DAC_BASE				0xFFF02000
--#define MMCI_BASE				0xFFF02400
--#define AUDIOC_BASE				0xFFF02800
--#define HISI_BASE				0xFFF02C00
--#define USB_BASE				0xFFF03000
--#define HSMC_BASE				0xFFF03400
--#define HSDRAMC_BASE				0xFFF03800
--#define ECC_BASE				0xFFF03C00
--
--#endif /* __AT32AP7000_MEMORY_MAP_H__ */
-diff --git a/include/asm-avr32/arch-at32ap7000/mmc.h b/include/asm-avr32/arch-at32ap7000/mmc.h
-deleted file mode 100644
-index fcfbbb3..0000000
---- a/include/asm-avr32/arch-at32ap7000/mmc.h
-+++ /dev/null
-@@ -1,96 +0,0 @@
--/*
-- * Copyright (C) 2004-2006 Atmel Corporation
-- *
-- * See file CREDITS for list of people who contributed to this
-- * project.
-- *
-- * This program is free software; you can redistribute it and/or
-- * modify it under the terms of the GNU General Public License as
-- * published by the Free Software Foundation; either version 2 of
-- * the License, or (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-- * MA 02111-1307 USA
-- */
--#ifndef __ASM_AVR32_MMC_H
--#define __ASM_AVR32_MMC_H
--
--struct mmc_cid {
--	unsigned long psn;
--	unsigned short oid;
--	unsigned char mid;
--	unsigned char prv;
--	unsigned char mdt;
--	char pnm[7];
--};
--
--struct mmc_csd
--{
--	u8	csd_structure:2,
--		spec_vers:4,
--		rsvd1:2;
--	u8	taac;
--	u8	nsac;
--	u8	tran_speed;
--	u16	ccc:12,
--		read_bl_len:4;
--	u64	read_bl_partial:1,
--		write_blk_misalign:1,
--		read_blk_misalign:1,
--		dsr_imp:1,
--		rsvd2:2,
--		c_size:12,
--		vdd_r_curr_min:3,
--		vdd_r_curr_max:3,
--		vdd_w_curr_min:3,
--		vdd_w_curr_max:3,
--		c_size_mult:3,
--		sector_size:5,
--		erase_grp_size:5,
--		wp_grp_size:5,
--		wp_grp_enable:1,
--		default_ecc:2,
--		r2w_factor:3,
--		write_bl_len:4,
--		write_bl_partial:1,
--		rsvd3:5;
--	u8	file_format_grp:1,
--		copy:1,
--		perm_write_protect:1,
--		tmp_write_protect:1,
--		file_format:2,
--		ecc:2;
--	u8	crc:7;
--	u8	one:1;
--};
--
--/* MMC Command numbers */
--#define MMC_CMD_GO_IDLE_STATE		0
--#define MMC_CMD_SEND_OP_COND		1
--#define MMC_CMD_ALL_SEND_CID 		2
--#define MMC_CMD_SET_RELATIVE_ADDR	3
--#define MMC_CMD_SD_SEND_RELATIVE_ADDR	3
--#define MMC_CMD_SET_DSR			4
--#define MMC_CMD_SELECT_CARD		7
--#define MMC_CMD_SEND_CSD 		9
--#define MMC_CMD_SEND_CID 		10
--#define MMC_CMD_SEND_STATUS		13
--#define MMC_CMD_SET_BLOCKLEN		16
--#define MMC_CMD_READ_SINGLE_BLOCK	17
--#define MMC_CMD_READ_MULTIPLE_BLOCK	18
--#define MMC_CMD_WRITE_BLOCK		24
--#define MMC_CMD_APP_CMD			55
--
--#define MMC_ACMD_SD_SEND_OP_COND	41
--
--#define R1_ILLEGAL_COMMAND		(1 << 22)
--#define R1_APP_CMD			(1 << 5)
--
--#endif /* __ASM_AVR32_MMC_H */
-diff --git a/include/asm-avr32/arch-at32ap700x/chip-features.h b/include/asm-avr32/arch-at32ap700x/chip-features.h
-new file mode 100644
-index 0000000..29b1fd6
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap700x/chip-features.h
-@@ -0,0 +1,34 @@
-+/*
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __ASM_AVR32_ARCH_CHIP_FEATURES_H__
-+#define __ASM_AVR32_ARCH_CHIP_FEATURES_H__
-+
-+/* Currently, all the AP700x chips have these */
-+#define AT32AP700x_CHIP_HAS_USART
-+#define AT32AP700x_CHIP_HAS_MMCI
-+
-+/* Only AP7000 has ethernet interface */
-+#ifdef CONFIG_AT32AP7000
-+#define AT32AP700x_CHIP_HAS_MACB
-+#endif
-+
-+#endif /* __ASM_AVR32_ARCH_CHIP_FEATURES_H__ */
-diff --git a/include/asm-avr32/arch-at32ap700x/clk.h b/include/asm-avr32/arch-at32ap700x/clk.h
-new file mode 100644
-index 0000000..ea84c08
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap700x/clk.h
-@@ -0,0 +1,78 @@
-+/*
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __ASM_AVR32_ARCH_CLK_H__
-+#define __ASM_AVR32_ARCH_CLK_H__
-+
-+#include <asm/arch/chip-features.h>
-+
-+#ifdef CONFIG_PLL
-+#define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL)
-+#else
-+#define MAIN_CLK_RATE (CFG_OSC0_HZ)
-+#endif
-+
-+static inline unsigned long get_cpu_clk_rate(void)
-+{
-+	return MAIN_CLK_RATE >> CFG_CLKDIV_CPU;
-+}
-+static inline unsigned long get_hsb_clk_rate(void)
-+{
-+	return MAIN_CLK_RATE >> CFG_CLKDIV_HSB;
-+}
-+static inline unsigned long get_pba_clk_rate(void)
-+{
-+	return MAIN_CLK_RATE >> CFG_CLKDIV_PBA;
-+}
-+static inline unsigned long get_pbb_clk_rate(void)
-+{
-+	return MAIN_CLK_RATE >> CFG_CLKDIV_PBB;
-+}
-+
-+/* Accessors for specific devices. More will be added as needed. */
-+static inline unsigned long get_sdram_clk_rate(void)
-+{
-+	return get_hsb_clk_rate();
-+}
-+#ifdef AT32AP700x_CHIP_HAS_USART
-+static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
-+{
-+	return get_pba_clk_rate();
-+}
-+#endif
-+#ifdef AT32AP700x_CHIP_HAS_USART
-+static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
-+{
-+	return get_pbb_clk_rate();
-+}
-+static inline unsigned long get_macb_hclk_rate(unsigned int dev_id)
-+{
-+	return get_hsb_clk_rate();
-+}
-+#endif
-+#ifdef AT32AP700x_CHIP_HAS_MMCI
-+static inline unsigned long get_mci_clk_rate(void)
-+{
-+	return get_pbb_clk_rate();
-+}
-+#endif
-+
-+#endif /* __ASM_AVR32_ARCH_CLK_H__ */
-diff --git a/include/asm-avr32/arch-at32ap700x/gpio.h b/include/asm-avr32/arch-at32ap700x/gpio.h
-new file mode 100644
-index 0000000..b10a3e4
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap700x/gpio.h
-@@ -0,0 +1,220 @@
-+/*
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __ASM_AVR32_ARCH_GPIO_H__
-+#define __ASM_AVR32_ARCH_GPIO_H__
-+
-+#include <asm/arch/chip-features.h>
-+#include <asm/arch/memory-map.h>
-+
-+#define NR_GPIO_CONTROLLERS	5
-+
-+/*
-+ * Pin numbers identifying specific GPIO pins on the chip.
-+ */
-+#define GPIO_PIOA_BASE	(0)
-+#define GPIO_PIN_PA0	(GPIO_PIOA_BASE +  0)
-+#define GPIO_PIN_PA1	(GPIO_PIOA_BASE +  1)
-+#define GPIO_PIN_PA2	(GPIO_PIOA_BASE +  2)
-+#define GPIO_PIN_PA3	(GPIO_PIOA_BASE +  3)
-+#define GPIO_PIN_PA4	(GPIO_PIOA_BASE +  4)
-+#define GPIO_PIN_PA5	(GPIO_PIOA_BASE +  5)
-+#define GPIO_PIN_PA6	(GPIO_PIOA_BASE +  6)
-+#define GPIO_PIN_PA7	(GPIO_PIOA_BASE +  7)
-+#define GPIO_PIN_PA8	(GPIO_PIOA_BASE +  8)
-+#define GPIO_PIN_PA9	(GPIO_PIOA_BASE +  9)
-+#define GPIO_PIN_PA10	(GPIO_PIOA_BASE + 10)
-+#define GPIO_PIN_PA11	(GPIO_PIOA_BASE + 11)
-+#define GPIO_PIN_PA12	(GPIO_PIOA_BASE + 12)
-+#define GPIO_PIN_PA13	(GPIO_PIOA_BASE + 13)
-+#define GPIO_PIN_PA14	(GPIO_PIOA_BASE + 14)
-+#define GPIO_PIN_PA15	(GPIO_PIOA_BASE + 15)
-+#define GPIO_PIN_PA16	(GPIO_PIOA_BASE + 16)
-+#define GPIO_PIN_PA17	(GPIO_PIOA_BASE + 17)
-+#define GPIO_PIN_PA18	(GPIO_PIOA_BASE + 18)
-+#define GPIO_PIN_PA19	(GPIO_PIOA_BASE + 19)
-+#define GPIO_PIN_PA20	(GPIO_PIOA_BASE + 20)
-+#define GPIO_PIN_PA21	(GPIO_PIOA_BASE + 21)
-+#define GPIO_PIN_PA22	(GPIO_PIOA_BASE + 22)
-+#define GPIO_PIN_PA23	(GPIO_PIOA_BASE + 23)
-+#define GPIO_PIN_PA24	(GPIO_PIOA_BASE + 24)
-+#define GPIO_PIN_PA25	(GPIO_PIOA_BASE + 25)
-+#define GPIO_PIN_PA26	(GPIO_PIOA_BASE + 26)
-+#define GPIO_PIN_PA27	(GPIO_PIOA_BASE + 27)
-+#define GPIO_PIN_PA28	(GPIO_PIOA_BASE + 28)
-+#define GPIO_PIN_PA29	(GPIO_PIOA_BASE + 29)
-+#define GPIO_PIN_PA30	(GPIO_PIOA_BASE + 30)
-+#define GPIO_PIN_PA31	(GPIO_PIOA_BASE + 31)
-+
-+#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
-+#define GPIO_PIN_PB0	(GPIO_PIOB_BASE +  0)
-+#define GPIO_PIN_PB1	(GPIO_PIOB_BASE +  1)
-+#define GPIO_PIN_PB2	(GPIO_PIOB_BASE +  2)
-+#define GPIO_PIN_PB3	(GPIO_PIOB_BASE +  3)
-+#define GPIO_PIN_PB4	(GPIO_PIOB_BASE +  4)
-+#define GPIO_PIN_PB5	(GPIO_PIOB_BASE +  5)
-+#define GPIO_PIN_PB6	(GPIO_PIOB_BASE +  6)
-+#define GPIO_PIN_PB7	(GPIO_PIOB_BASE +  7)
-+#define GPIO_PIN_PB8	(GPIO_PIOB_BASE +  8)
-+#define GPIO_PIN_PB9	(GPIO_PIOB_BASE +  9)
-+#define GPIO_PIN_PB10	(GPIO_PIOB_BASE + 10)
-+#define GPIO_PIN_PB11	(GPIO_PIOB_BASE + 11)
-+#define GPIO_PIN_PB12	(GPIO_PIOB_BASE + 12)
-+#define GPIO_PIN_PB13	(GPIO_PIOB_BASE + 13)
-+#define GPIO_PIN_PB14	(GPIO_PIOB_BASE + 14)
-+#define GPIO_PIN_PB15	(GPIO_PIOB_BASE + 15)
-+#define GPIO_PIN_PB16	(GPIO_PIOB_BASE + 16)
-+#define GPIO_PIN_PB17	(GPIO_PIOB_BASE + 17)
-+#define GPIO_PIN_PB18	(GPIO_PIOB_BASE + 18)
-+#define GPIO_PIN_PB19	(GPIO_PIOB_BASE + 19)
-+#define GPIO_PIN_PB20	(GPIO_PIOB_BASE + 20)
-+#define GPIO_PIN_PB21	(GPIO_PIOB_BASE + 21)
-+#define GPIO_PIN_PB22	(GPIO_PIOB_BASE + 22)
-+#define GPIO_PIN_PB23	(GPIO_PIOB_BASE + 23)
-+#define GPIO_PIN_PB24	(GPIO_PIOB_BASE + 24)
-+#define GPIO_PIN_PB25	(GPIO_PIOB_BASE + 25)
-+#define GPIO_PIN_PB26	(GPIO_PIOB_BASE + 26)
-+#define GPIO_PIN_PB27	(GPIO_PIOB_BASE + 27)
-+#define GPIO_PIN_PB28	(GPIO_PIOB_BASE + 28)
-+#define GPIO_PIN_PB29	(GPIO_PIOB_BASE + 29)
-+#define GPIO_PIN_PB30	(GPIO_PIOB_BASE + 30)
-+
-+#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
-+#define GPIO_PIN_PC0	(GPIO_PIOC_BASE +  0)
-+#define GPIO_PIN_PC1	(GPIO_PIOC_BASE +  1)
-+#define GPIO_PIN_PC2	(GPIO_PIOC_BASE +  2)
-+#define GPIO_PIN_PC3	(GPIO_PIOC_BASE +  3)
-+#define GPIO_PIN_PC4	(GPIO_PIOC_BASE +  4)
-+#define GPIO_PIN_PC5	(GPIO_PIOC_BASE +  5)
-+#define GPIO_PIN_PC6	(GPIO_PIOC_BASE +  6)
-+#define GPIO_PIN_PC7	(GPIO_PIOC_BASE +  7)
-+#define GPIO_PIN_PC8	(GPIO_PIOC_BASE +  8)
-+#define GPIO_PIN_PC9	(GPIO_PIOC_BASE +  9)
-+#define GPIO_PIN_PC10	(GPIO_PIOC_BASE + 10)
-+#define GPIO_PIN_PC11	(GPIO_PIOC_BASE + 11)
-+#define GPIO_PIN_PC12	(GPIO_PIOC_BASE + 12)
-+#define GPIO_PIN_PC13	(GPIO_PIOC_BASE + 13)
-+#define GPIO_PIN_PC14	(GPIO_PIOC_BASE + 14)
-+#define GPIO_PIN_PC15	(GPIO_PIOC_BASE + 15)
-+#define GPIO_PIN_PC16	(GPIO_PIOC_BASE + 16)
-+#define GPIO_PIN_PC17	(GPIO_PIOC_BASE + 17)
-+#define GPIO_PIN_PC18	(GPIO_PIOC_BASE + 18)
-+#define GPIO_PIN_PC19	(GPIO_PIOC_BASE + 19)
-+#define GPIO_PIN_PC20	(GPIO_PIOC_BASE + 20)
-+#define GPIO_PIN_PC21	(GPIO_PIOC_BASE + 21)
-+#define GPIO_PIN_PC22	(GPIO_PIOC_BASE + 22)
-+#define GPIO_PIN_PC23	(GPIO_PIOC_BASE + 23)
-+#define GPIO_PIN_PC24	(GPIO_PIOC_BASE + 24)
-+#define GPIO_PIN_PC25	(GPIO_PIOC_BASE + 25)
-+#define GPIO_PIN_PC26	(GPIO_PIOC_BASE + 26)
-+#define GPIO_PIN_PC27	(GPIO_PIOC_BASE + 27)
-+#define GPIO_PIN_PC28	(GPIO_PIOC_BASE + 28)
-+#define GPIO_PIN_PC29	(GPIO_PIOC_BASE + 29)
-+#define GPIO_PIN_PC30	(GPIO_PIOC_BASE + 30)
-+#define GPIO_PIN_PC31	(GPIO_PIOC_BASE + 31)
-+
-+#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
-+#define GPIO_PIN_PD0	(GPIO_PIOD_BASE +  0)
-+#define GPIO_PIN_PD1	(GPIO_PIOD_BASE +  1)
-+#define GPIO_PIN_PD2	(GPIO_PIOD_BASE +  2)
-+#define GPIO_PIN_PD3	(GPIO_PIOD_BASE +  3)
-+#define GPIO_PIN_PD4	(GPIO_PIOD_BASE +  4)
-+#define GPIO_PIN_PD5	(GPIO_PIOD_BASE +  5)
-+#define GPIO_PIN_PD6	(GPIO_PIOD_BASE +  6)
-+#define GPIO_PIN_PD7	(GPIO_PIOD_BASE +  7)
-+#define GPIO_PIN_PD8	(GPIO_PIOD_BASE +  8)
-+#define GPIO_PIN_PD9	(GPIO_PIOD_BASE +  9)
-+#define GPIO_PIN_PD10	(GPIO_PIOD_BASE + 10)
-+#define GPIO_PIN_PD11	(GPIO_PIOD_BASE + 11)
-+#define GPIO_PIN_PD12	(GPIO_PIOD_BASE + 12)
-+#define GPIO_PIN_PD13	(GPIO_PIOD_BASE + 13)
-+#define GPIO_PIN_PD14	(GPIO_PIOD_BASE + 14)
-+#define GPIO_PIN_PD15	(GPIO_PIOD_BASE + 15)
-+#define GPIO_PIN_PD16	(GPIO_PIOD_BASE + 16)
-+#define GPIO_PIN_PD17	(GPIO_PIOD_BASE + 17)
-+
-+#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
-+#define GPIO_PIN_PE0	(GPIO_PIOE_BASE +  0)
-+#define GPIO_PIN_PE1	(GPIO_PIOE_BASE +  1)
-+#define GPIO_PIN_PE2	(GPIO_PIOE_BASE +  2)
-+#define GPIO_PIN_PE3	(GPIO_PIOE_BASE +  3)
-+#define GPIO_PIN_PE4	(GPIO_PIOE_BASE +  4)
-+#define GPIO_PIN_PE5	(GPIO_PIOE_BASE +  5)
-+#define GPIO_PIN_PE6	(GPIO_PIOE_BASE +  6)
-+#define GPIO_PIN_PE7	(GPIO_PIOE_BASE +  7)
-+#define GPIO_PIN_PE8	(GPIO_PIOE_BASE +  8)
-+#define GPIO_PIN_PE9	(GPIO_PIOE_BASE +  9)
-+#define GPIO_PIN_PE10	(GPIO_PIOE_BASE + 10)
-+#define GPIO_PIN_PE11	(GPIO_PIOE_BASE + 11)
-+#define GPIO_PIN_PE12	(GPIO_PIOE_BASE + 12)
-+#define GPIO_PIN_PE13	(GPIO_PIOE_BASE + 13)
-+#define GPIO_PIN_PE14	(GPIO_PIOE_BASE + 14)
-+#define GPIO_PIN_PE15	(GPIO_PIOE_BASE + 15)
-+#define GPIO_PIN_PE16	(GPIO_PIOE_BASE + 16)
-+#define GPIO_PIN_PE17	(GPIO_PIOE_BASE + 17)
-+#define GPIO_PIN_PE18	(GPIO_PIOE_BASE + 18)
-+#define GPIO_PIN_PE19	(GPIO_PIOE_BASE + 19)
-+#define GPIO_PIN_PE20	(GPIO_PIOE_BASE + 20)
-+#define GPIO_PIN_PE21	(GPIO_PIOE_BASE + 21)
-+#define GPIO_PIN_PE22	(GPIO_PIOE_BASE + 22)
-+#define GPIO_PIN_PE23	(GPIO_PIOE_BASE + 23)
-+#define GPIO_PIN_PE24	(GPIO_PIOE_BASE + 24)
-+#define GPIO_PIN_PE25	(GPIO_PIOE_BASE + 25)
-+#define GPIO_PIN_PE26	(GPIO_PIOE_BASE + 26)
-+
-+static inline void *gpio_pin_to_addr(unsigned int pin)
-+{
-+	switch (pin >> 5) {
-+	case 0:
-+		return (void *)PIOA_BASE;
-+	case 1:
-+		return (void *)PIOB_BASE;
-+	case 2:
-+		return (void *)PIOC_BASE;
-+	case 3:
-+		return (void *)PIOD_BASE;
-+	case 4:
-+		return (void *)PIOE_BASE;
-+	default:
-+		return NULL;
-+	}
-+}
-+
-+void gpio_select_periph_A(unsigned int pin, int use_pullup);
-+void gpio_select_periph_B(unsigned int pin, int use_pullup);
-+
-+void gpio_enable_ebi(void);
-+
-+#ifdef AT32AP700x_CHIP_HAS_USART
-+void gpio_enable_usart0(void);
-+void gpio_enable_usart1(void);
-+void gpio_enable_usart2(void);
-+void gpio_enable_usart3(void);
-+#endif
-+#ifdef AT32AP700x_CHIP_HAS_MACB
-+void gpio_enable_macb0(void);
-+void gpio_enable_macb1(void);
-+#endif
-+#ifdef AT32AP700x_CHIP_HAS_MMCI
-+void gpio_enable_mmci(void);
-+#endif
-+
-+#endif /* __ASM_AVR32_ARCH_GPIO_H__ */
-diff --git a/include/asm-avr32/arch-at32ap700x/hmatrix2.h b/include/asm-avr32/arch-at32ap700x/hmatrix2.h
-new file mode 100644
-index 0000000..b0e787a
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap700x/hmatrix2.h
-@@ -0,0 +1,232 @@
-+/*
-+ * Register definition for the High-speed Bus Matrix
-+ */
-+#ifndef __ASM_AVR32_HMATRIX2_H__
-+#define __ASM_AVR32_HMATRIX2_H__
-+
-+/* HMATRIX2 register offsets */
-+#define HMATRIX2_MCFG0				0x0000
-+#define HMATRIX2_MCFG1				0x0004
-+#define HMATRIX2_MCFG2				0x0008
-+#define HMATRIX2_MCFG3				0x000c
-+#define HMATRIX2_MCFG4				0x0010
-+#define HMATRIX2_MCFG5				0x0014
-+#define HMATRIX2_MCFG6				0x0018
-+#define HMATRIX2_MCFG7				0x001c
-+#define HMATRIX2_MCFG8				0x0020
-+#define HMATRIX2_MCFG9				0x0024
-+#define HMATRIX2_MCFG10				0x0028
-+#define HMATRIX2_MCFG11				0x002c
-+#define HMATRIX2_MCFG12				0x0030
-+#define HMATRIX2_MCFG13				0x0034
-+#define HMATRIX2_MCFG14				0x0038
-+#define HMATRIX2_MCFG15				0x003c
-+#define HMATRIX2_SCFG0				0x0040
-+#define HMATRIX2_SCFG1				0x0044
-+#define HMATRIX2_SCFG2				0x0048
-+#define HMATRIX2_SCFG3				0x004c
-+#define HMATRIX2_SCFG4				0x0050
-+#define HMATRIX2_SCFG5				0x0054
-+#define HMATRIX2_SCFG6				0x0058
-+#define HMATRIX2_SCFG7				0x005c
-+#define HMATRIX2_SCFG8				0x0060
-+#define HMATRIX2_SCFG9				0x0064
-+#define HMATRIX2_SCFG10				0x0068
-+#define HMATRIX2_SCFG11				0x006c
-+#define HMATRIX2_SCFG12				0x0070
-+#define HMATRIX2_SCFG13				0x0074
-+#define HMATRIX2_SCFG14				0x0078
-+#define HMATRIX2_SCFG15				0x007c
-+#define HMATRIX2_PRAS0				0x0080
-+#define HMATRIX2_PRBS0				0x0084
-+#define HMATRIX2_PRAS1				0x0088
-+#define HMATRIX2_PRBS1				0x008c
-+#define HMATRIX2_PRAS2				0x0090
-+#define HMATRIX2_PRBS2				0x0094
-+#define HMATRIX2_PRAS3				0x0098
-+#define HMATRIX2_PRBS3				0x009c
-+#define HMATRIX2_PRAS4				0x00a0
-+#define HMATRIX2_PRBS4				0x00a4
-+#define HMATRIX2_PRAS5				0x00a8
-+#define HMATRIX2_PRBS5				0x00ac
-+#define HMATRIX2_PRAS6				0x00b0
-+#define HMATRIX2_PRBS6				0x00b4
-+#define HMATRIX2_PRAS7				0x00b8
-+#define HMATRIX2_PRBS7				0x00bc
-+#define HMATRIX2_PRAS8				0x00c0
-+#define HMATRIX2_PRBS8				0x00c4
-+#define HMATRIX2_PRAS9				0x00c8
-+#define HMATRIX2_PRBS9				0x00cc
-+#define HMATRIX2_PRAS10				0x00d0
-+#define HMATRIX2_PRBS10				0x00d4
-+#define HMATRIX2_PRAS11				0x00d8
-+#define HMATRIX2_PRBS11				0x00dc
-+#define HMATRIX2_PRAS12				0x00e0
-+#define HMATRIX2_PRBS12				0x00e4
-+#define HMATRIX2_PRAS13				0x00e8
-+#define HMATRIX2_PRBS13				0x00ec
-+#define HMATRIX2_PRAS14				0x00f0
-+#define HMATRIX2_PRBS14				0x00f4
-+#define HMATRIX2_PRAS15				0x00f8
-+#define HMATRIX2_PRBS15				0x00fc
-+#define HMATRIX2_MRCR				0x0100
-+#define HMATRIX2_SFR0				0x0110
-+#define HMATRIX2_SFR1				0x0114
-+#define HMATRIX2_SFR2				0x0118
-+#define HMATRIX2_SFR3				0x011c
-+#define HMATRIX2_SFR4				0x0120
-+#define HMATRIX2_SFR5				0x0124
-+#define HMATRIX2_SFR6				0x0128
-+#define HMATRIX2_SFR7				0x012c
-+#define HMATRIX2_SFR8				0x0130
-+#define HMATRIX2_SFR9				0x0134
-+#define HMATRIX2_SFR10				0x0138
-+#define HMATRIX2_SFR11				0x013c
-+#define HMATRIX2_SFR12				0x0140
-+#define HMATRIX2_SFR13				0x0144
-+#define HMATRIX2_SFR14				0x0148
-+#define HMATRIX2_SFR15				0x014c
-+#define HMATRIX2_VERSION			0x01fc
-+
-+/* Bitfields in MCFG0 */
-+#define HMATRIX2_ULBT_OFFSET			0
-+#define HMATRIX2_ULBT_SIZE			3
-+
-+/* Bitfields in SCFG0 */
-+#define HMATRIX2_SLOT_CYCLE_OFFSET		0
-+#define HMATRIX2_SLOT_CYCLE_SIZE		8
-+#define HMATRIX2_DEFMSTR_TYPE_OFFSET		16
-+#define HMATRIX2_DEFMSTR_TYPE_SIZE		2
-+#define HMATRIX2_FIXED_DEFMSTR_OFFSET		18
-+#define HMATRIX2_FIXED_DEFMSTR_SIZE		4
-+#define HMATRIX2_ARBT_OFFSET			24
-+#define HMATRIX2_ARBT_SIZE			2
-+
-+/* Bitfields in PRAS0 */
-+#define HMATRIX2_M0PR_OFFSET			0
-+#define HMATRIX2_M0PR_SIZE			4
-+#define HMATRIX2_M1PR_OFFSET			4
-+#define HMATRIX2_M1PR_SIZE			4
-+#define HMATRIX2_M2PR_OFFSET			8
-+#define HMATRIX2_M2PR_SIZE			4
-+#define HMATRIX2_M3PR_OFFSET			12
-+#define HMATRIX2_M3PR_SIZE			4
-+#define HMATRIX2_M4PR_OFFSET			16
-+#define HMATRIX2_M4PR_SIZE			4
-+#define HMATRIX2_M5PR_OFFSET			20
-+#define HMATRIX2_M5PR_SIZE			4
-+#define HMATRIX2_M6PR_OFFSET			24
-+#define HMATRIX2_M6PR_SIZE			4
-+#define HMATRIX2_M7PR_OFFSET			28
-+#define HMATRIX2_M7PR_SIZE			4
-+
-+/* Bitfields in PRBS0 */
-+#define HMATRIX2_M8PR_OFFSET			0
-+#define HMATRIX2_M8PR_SIZE			4
-+#define HMATRIX2_M9PR_OFFSET			4
-+#define HMATRIX2_M9PR_SIZE			4
-+#define HMATRIX2_M10PR_OFFSET			8
-+#define HMATRIX2_M10PR_SIZE			4
-+#define HMATRIX2_M11PR_OFFSET			12
-+#define HMATRIX2_M11PR_SIZE			4
-+#define HMATRIX2_M12PR_OFFSET			16
-+#define HMATRIX2_M12PR_SIZE			4
-+#define HMATRIX2_M13PR_OFFSET			20
-+#define HMATRIX2_M13PR_SIZE			4
-+#define HMATRIX2_M14PR_OFFSET			24
-+#define HMATRIX2_M14PR_SIZE			4
-+#define HMATRIX2_M15PR_OFFSET			28
-+#define HMATRIX2_M15PR_SIZE			4
-+
-+/* Bitfields in MRCR */
-+#define HMATRIX2_RBC0_OFFSET			0
-+#define HMATRIX2_RBC0_SIZE			1
-+#define HMATRIX2_RBC1_OFFSET			1
-+#define HMATRIX2_RBC1_SIZE			1
-+#define HMATRIX2_RBC2_OFFSET			2
-+#define HMATRIX2_RBC2_SIZE			1
-+#define HMATRIX2_RBC3_OFFSET			3
-+#define HMATRIX2_RBC3_SIZE			1
-+#define HMATRIX2_RBC4_OFFSET			4
-+#define HMATRIX2_RBC4_SIZE			1
-+#define HMATRIX2_RBC5_OFFSET			5
-+#define HMATRIX2_RBC5_SIZE			1
-+#define HMATRIX2_RBC6_OFFSET			6
-+#define HMATRIX2_RBC6_SIZE			1
-+#define HMATRIX2_RBC7_OFFSET			7
-+#define HMATRIX2_RBC7_SIZE			1
-+#define HMATRIX2_RBC8_OFFSET			8
-+#define HMATRIX2_RBC8_SIZE			1
-+#define HMATRIX2_RBC9_OFFSET			9
-+#define HMATRIX2_RBC9_SIZE			1
-+#define HMATRIX2_RBC10_OFFSET			10
-+#define HMATRIX2_RBC10_SIZE			1
-+#define HMATRIX2_RBC11_OFFSET			11
-+#define HMATRIX2_RBC11_SIZE			1
-+#define HMATRIX2_RBC12_OFFSET			12
-+#define HMATRIX2_RBC12_SIZE			1
-+#define HMATRIX2_RBC13_OFFSET			13
-+#define HMATRIX2_RBC13_SIZE			1
-+#define HMATRIX2_RBC14_OFFSET			14
-+#define HMATRIX2_RBC14_SIZE			1
-+#define HMATRIX2_RBC15_OFFSET			15
-+#define HMATRIX2_RBC15_SIZE			1
-+
-+/* Bitfields in SFR0 */
-+#define HMATRIX2_SFR_OFFSET			0
-+#define HMATRIX2_SFR_SIZE			32
-+
-+/* Bitfields in SFR4 */
-+#define HMATRIX2_CS1A_OFFSET			1
-+#define HMATRIX2_CS1A_SIZE			1
-+#define HMATRIX2_CS3A_OFFSET			3
-+#define HMATRIX2_CS3A_SIZE			1
-+#define HMATRIX2_CS4A_OFFSET			4
-+#define HMATRIX2_CS4A_SIZE			1
-+#define HMATRIX2_CS5A_OFFSET			5
-+#define HMATRIX2_CS5A_SIZE			1
-+#define HMATRIX2_DBPUC_OFFSET			8
-+#define HMATRIX2_DBPUC_SIZE			1
-+
-+/* Bitfields in VERSION */
-+#define HMATRIX2_VERSION_OFFSET			0
-+#define HMATRIX2_VERSION_SIZE			12
-+#define HMATRIX2_MFN_OFFSET			16
-+#define HMATRIX2_MFN_SIZE			3
-+
-+/* Constants for ULBT */
-+#define HMATRIX2_ULBT_INFINITE			0
-+#define HMATRIX2_ULBT_SINGLE			1
-+#define HMATRIX2_ULBT_FOUR_BEAT			2
-+#define HMATRIX2_ULBT_SIXTEEN_BEAT		4
-+
-+/* Constants for DEFMSTR_TYPE */
-+#define HMATRIX2_DEFMSTR_TYPE_NO_DEFAULT	0
-+#define HMATRIX2_DEFMSTR_TYPE_LAST_DEFAULT	1
-+#define HMATRIX2_DEFMSTR_TYPE_FIXED_DEFAULT	2
-+
-+/* Constants for ARBT */
-+#define HMATRIX2_ARBT_ROUND_ROBIN		0
-+#define HMATRIX2_ARBT_FIXED_PRIORITY		1
-+
-+/* Bit manipulation macros */
-+#define HMATRIX2_BIT(name)					\
-+	(1 << HMATRIX2_##name##_OFFSET)
-+#define HMATRIX2_BF(name,value)					\
-+	(((value) & ((1 << HMATRIX2_##name##_SIZE) - 1))	\
-+	 << HMATRIX2_##name##_OFFSET)
-+#define HMATRIX2_BFEXT(name,value)				\
-+	(((value) >> HMATRIX2_##name##_OFFSET)			\
-+	 & ((1 << HMATRIX2_##name##_SIZE) - 1))
-+#define HMATRIX2_BFINS(name,value,old)				\
-+	(((old) & ~(((1 << HMATRIX2_##name##_SIZE) - 1)		\
-+		    << HMATRIX2_##name##_OFFSET))		\
-+	 | HMATRIX2_BF(name,value))
-+
-+/* Register access macros */
-+#define hmatrix2_readl(reg)					\
-+	readl((void *)HMATRIX_BASE + HMATRIX2_##reg)
-+#define hmatrix2_writel(reg,value)				\
-+	writel((value), (void *)HMATRIX_BASE + HMATRIX2_##reg)
-+
-+#endif /* __ASM_AVR32_HMATRIX2_H__ */
-diff --git a/include/asm-avr32/arch-at32ap700x/memory-map.h b/include/asm-avr32/arch-at32ap700x/memory-map.h
-new file mode 100644
-index 0000000..5513e88
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap700x/memory-map.h
-@@ -0,0 +1,66 @@
-+/*
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __AT32AP7000_MEMORY_MAP_H__
-+#define __AT32AP7000_MEMORY_MAP_H__
-+
-+/* Devices on the High Speed Bus (HSB) */
-+#define LCDC_BASE				0xFF000000
-+#define DMAC_BASE				0xFF200000
-+#define USB_FIFO				0xFF300000
-+
-+/* Devices on Peripheral Bus A (PBA) */
-+#define SPI0_BASE				0xFFE00000
-+#define SPI1_BASE				0xFFE00400
-+#define TWI_BASE				0xFFE00800
-+#define USART0_BASE				0xFFE00C00
-+#define USART1_BASE				0xFFE01000
-+#define USART2_BASE				0xFFE01400
-+#define USART3_BASE				0xFFE01800
-+#define SSC0_BASE				0xFFE01C00
-+#define SSC1_BASE				0xFFE02000
-+#define SSC2_BASE				0xFFE02400
-+#define PIOA_BASE				0xFFE02800
-+#define PIOB_BASE				0xFFE02C00
-+#define PIOC_BASE				0xFFE03000
-+#define PIOD_BASE				0xFFE03400
-+#define PIOE_BASE				0xFFE03800
-+#define PSIF_BASE				0xFFE03C00
-+
-+/* Devices on Peripheral Bus B (PBB) */
-+#define SM_BASE					0xFFF00000
-+#define INTC_BASE				0xFFF00400
-+#define HMATRIX_BASE				0xFFF00800
-+#define TIMER0_BASE				0xFFF00C00
-+#define TIMER1_BASE				0xFFF01000
-+#define PWM_BASE				0xFFF01400
-+#define MACB0_BASE				0xFFF01800
-+#define MACB1_BASE				0xFFF01C00
-+#define DAC_BASE				0xFFF02000
-+#define MMCI_BASE				0xFFF02400
-+#define AUDIOC_BASE				0xFFF02800
-+#define HISI_BASE				0xFFF02C00
-+#define USB_BASE				0xFFF03000
-+#define HSMC_BASE				0xFFF03400
-+#define HSDRAMC_BASE				0xFFF03800
-+#define ECC_BASE				0xFFF03C00
-+
-+#endif /* __AT32AP7000_MEMORY_MAP_H__ */
-diff --git a/include/asm-avr32/arch-at32ap700x/mmc.h b/include/asm-avr32/arch-at32ap700x/mmc.h
-new file mode 100644
-index 0000000..fcfbbb3
---- /dev/null
-+++ b/include/asm-avr32/arch-at32ap700x/mmc.h
-@@ -0,0 +1,96 @@
-+/*
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __ASM_AVR32_MMC_H
-+#define __ASM_AVR32_MMC_H
-+
-+struct mmc_cid {
-+	unsigned long psn;
-+	unsigned short oid;
-+	unsigned char mid;
-+	unsigned char prv;
-+	unsigned char mdt;
-+	char pnm[7];
-+};
-+
-+struct mmc_csd
-+{
-+	u8	csd_structure:2,
-+		spec_vers:4,
-+		rsvd1:2;
-+	u8	taac;
-+	u8	nsac;
-+	u8	tran_speed;
-+	u16	ccc:12,
-+		read_bl_len:4;
-+	u64	read_bl_partial:1,
-+		write_blk_misalign:1,
-+		read_blk_misalign:1,
-+		dsr_imp:1,
-+		rsvd2:2,
-+		c_size:12,
-+		vdd_r_curr_min:3,
-+		vdd_r_curr_max:3,
-+		vdd_w_curr_min:3,
-+		vdd_w_curr_max:3,
-+		c_size_mult:3,
-+		sector_size:5,
-+		erase_grp_size:5,
-+		wp_grp_size:5,
-+		wp_grp_enable:1,
-+		default_ecc:2,
-+		r2w_factor:3,
-+		write_bl_len:4,
-+		write_bl_partial:1,
-+		rsvd3:5;
-+	u8	file_format_grp:1,
-+		copy:1,
-+		perm_write_protect:1,
-+		tmp_write_protect:1,
-+		file_format:2,
-+		ecc:2;
-+	u8	crc:7;
-+	u8	one:1;
-+};
-+
-+/* MMC Command numbers */
-+#define MMC_CMD_GO_IDLE_STATE		0
-+#define MMC_CMD_SEND_OP_COND		1
-+#define MMC_CMD_ALL_SEND_CID 		2
-+#define MMC_CMD_SET_RELATIVE_ADDR	3
-+#define MMC_CMD_SD_SEND_RELATIVE_ADDR	3
-+#define MMC_CMD_SET_DSR			4
-+#define MMC_CMD_SELECT_CARD		7
-+#define MMC_CMD_SEND_CSD 		9
-+#define MMC_CMD_SEND_CID 		10
-+#define MMC_CMD_SEND_STATUS		13
-+#define MMC_CMD_SET_BLOCKLEN		16
-+#define MMC_CMD_READ_SINGLE_BLOCK	17
-+#define MMC_CMD_READ_MULTIPLE_BLOCK	18
-+#define MMC_CMD_WRITE_BLOCK		24
-+#define MMC_CMD_APP_CMD			55
-+
-+#define MMC_ACMD_SD_SEND_OP_COND	41
-+
-+#define R1_ILLEGAL_COMMAND		(1 << 22)
-+#define R1_APP_CMD			(1 << 5)
-+
-+#endif /* __ASM_AVR32_MMC_H */
-diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
-new file mode 100644
-index 0000000..0be5fcb
---- /dev/null
-+++ b/include/configs/atngw100.h
-@@ -0,0 +1,177 @@
-+/*
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * Configuration settings for the AVR32 Network Gateway
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_AVR32			1
-+#define CONFIG_AT32AP			1
-+#define CONFIG_AT32AP7000		1
-+#define CONFIG_ATNGW100			1
-+
-+#define CONFIG_ATNGW100_EXT_FLASH	1
-+
-+#define CFG_HZ				1000
-+
-+/*
-+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
-+ * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
-+ * and the PBA bus to run at 1/4 the PLL frequency.
-+ */
-+#define CONFIG_PLL			1
-+#define CFG_POWER_MANAGER		1
-+#define CFG_OSC0_HZ			20000000
-+#define CFG_PLL0_DIV			1
-+#define CFG_PLL0_MUL			7
-+#define CFG_PLL0_SUPPRESS_CYCLES	16
-+#define CFG_CLKDIV_CPU			0
-+#define CFG_CLKDIV_HSB			1
-+#define CFG_CLKDIV_PBA			2
-+#define CFG_CLKDIV_PBB			1
-+
-+/*
-+ * The PLLOPT register controls the PLL like this:
-+ *   icp = PLLOPT<2>
-+ *   ivco = PLLOPT<1:0>
-+ *
-+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
-+ */
-+#define CFG_PLL0_OPT			0x04
-+
-+#define CONFIG_USART1			1
-+
-+/* User serviceable stuff */
-+#define CONFIG_DOS_PARTITION		1
-+
-+#define CONFIG_CMDLINE_TAG		1
-+#define CONFIG_SETUP_MEMORY_TAGS	1
-+#define CONFIG_INITRD_TAG		1
-+
-+#define CONFIG_STACKSIZE		(2048)
-+
-+#define CONFIG_BAUDRATE			115200
-+#define CONFIG_BOOTARGS							\
-+	"console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2"
-+#define CONFIG_BOOTCOMMAND						\
-+	"fsload; bootm"
-+
-+/*
-+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
-+ * data on the serial line may interrupt the boot sequence.
-+ */
-+#define CONFIG_BOOTDELAY		1
-+#define CONFIG_AUTOBOOT			1
-+#define CONFIG_AUTOBOOT_KEYED		1
-+#define CONFIG_AUTOBOOT_PROMPT				\
-+        "Press SPACE to abort autoboot in %d seconds\n"
-+#define CONFIG_AUTOBOOT_DELAY_STR	"d"
-+#define CONFIG_AUTOBOOT_STOP_STR	" "
-+
-+/*
-+ * After booting the board for the first time, new ethernet addresses
-+ * should be generated and assigned to the environment variables
-+ * "ethaddr" and "eth1addr". This is normally done during production.
-+ */
-+#define CONFIG_OVERWRITE_ETHADDR_ONCE	1
-+#define CONFIG_NET_MULTI		1
-+
-+/*
-+ * BOOTP/DHCP options
-+ */
-+#define CONFIG_BOOTP_SUBNETMASK
-+#define CONFIG_BOOTP_GATEWAY
-+
-+#define CONFIG_DOS_PARTITION		1
-+
-+/*
-+ * Command line configuration.
-+ */
-+#include <config_cmd_default.h>
-+
-+#define CONFIG_CMD_ASKENV
-+#define CONFIG_CMD_DHCP
-+#define CONFIG_CMD_EXT2
-+#define CONFIG_CMD_FAT
-+#define CONFIG_CMD_JFFS2
-+#define CONFIG_CMD_MMC
-+#undef CONFIG_CMD_FPGA
-+#undef CONFIG_CMD_SETGETDCR
-+
-+#define CONFIG_ATMEL_USART		1
-+#define CONFIG_MACB			1
-+#define CONFIG_PIO2			1
-+#define CFG_NR_PIOS			5
-+#define CFG_HSDRAMC			1
-+#define CONFIG_MMC			1
-+
-+#define CFG_DCACHE_LINESZ		32
-+#define CFG_ICACHE_LINESZ		32
-+
-+#define CONFIG_NR_DRAM_BANKS		1
-+
-+#define CFG_FLASH_BASE			0x00000000
-+#define CFG_FLASH_SIZE			0x800000
-+#define CFG_MAX_FLASH_BANKS		1
-+#define CFG_MAX_FLASH_SECT		135
-+
-+#define CFG_MONITOR_BASE		CFG_FLASH_BASE
-+
-+#define CFG_INTRAM_BASE			0x24000000
-+#define CFG_INTRAM_SIZE			0x8000
-+
-+#define CFG_SDRAM_BASE			0x10000000
-+#define CFG_SDRAM_16BIT			1
-+
-+#define CFG_ENV_IS_IN_FLASH		1
-+#define CFG_ENV_SIZE			65536
-+#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
-+
-+#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
-+
-+#define CFG_MALLOC_LEN			(256*1024)
-+#define CFG_MALLOC_END							\
-+	({								\
-+		DECLARE_GLOBAL_DATA_PTR;				\
-+		CFG_SDRAM_BASE + gd->sdram_size;			\
-+	})
-+#define CFG_MALLOC_START		(CFG_MALLOC_END - CFG_MALLOC_LEN)
-+
-+#define CFG_DMA_ALLOC_LEN		(16384)
-+
-+/* Allow 4MB for the kernel run-time image */
-+#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00400000)
-+#define CFG_BOOTPARAMS_LEN		(16 * 1024)
-+
-+/* Other configuration settings that shouldn't have to change all that often */
-+#define CFG_PROMPT			"Uboot> "
-+#define CFG_CBSIZE			256
-+#define CFG_MAXARGS			16
-+#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-+#define CFG_LONGHELP			1
-+
-+#define CFG_MEMTEST_START		CFG_SDRAM_BASE
-+#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x1f00000)
-+
-+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
-+
-+#endif /* __CONFIG_H */
-diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
-index b33e26f..95aeab6 100644
---- a/include/configs/atstk1002.h
-+++ b/include/configs/atstk1002.h
-@@ -184,8 +184,8 @@
- #define CFG_MALLOC_LEN			(256*1024)
- #define CFG_DMA_ALLOC_LEN		(16384)
- 
--/* Allow 2MB for the kernel run-time image */
--#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00200000)
-+/* Allow 4MB for the kernel run-time image */
-+#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00400000)
- #define CFG_BOOTPARAMS_LEN		(16 * 1024)
- 
- /* Other configuration settings that shouldn't have to change all that often */
-diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
-new file mode 100644
-index 0000000..194788b
---- /dev/null
-+++ b/include/configs/atstk1003.h
-@@ -0,0 +1,184 @@
-+/*
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * Configuration settings for the ATSTK1003 CPU daughterboard
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_AVR32			1
-+#define CONFIG_AT32AP			1
-+#define CONFIG_AT32AP7001		1
-+#define CONFIG_ATSTK1003		1
-+#define CONFIG_ATSTK1000		1
-+
-+#define CONFIG_ATSTK1000_EXT_FLASH	1
-+
-+/*
-+ * Timer clock frequency. We're using the CPU-internal COUNT register
-+ * for this, so this is equivalent to the CPU core clock frequency
-+ */
-+#define CFG_HZ				1000
-+
-+/*
-+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
-+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
-+ * PLL frequency.
-+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
-+ */
-+#define CONFIG_PLL			1
-+#define CFG_POWER_MANAGER		1
-+#define CFG_OSC0_HZ			20000000
-+#define CFG_PLL0_DIV			1
-+#define CFG_PLL0_MUL			7
-+#define CFG_PLL0_SUPPRESS_CYCLES	16
-+/*
-+ * Set the CPU running at:
-+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
-+ */
-+#define CFG_CLKDIV_CPU			0
-+/*
-+ * Set the HSB running at:
-+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
-+ */
-+#define CFG_CLKDIV_HSB			1
-+/*
-+ * Set the PBA running at:
-+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
-+ */
-+#define CFG_CLKDIV_PBA			2
-+/*
-+ * Set the PBB running at:
-+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
-+ */
-+#define CFG_CLKDIV_PBB			1
-+
-+/*
-+ * The PLLOPT register controls the PLL like this:
-+ *   icp = PLLOPT<2>
-+ *   ivco = PLLOPT<1:0>
-+ *
-+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
-+ */
-+#define CFG_PLL0_OPT			0x04
-+
-+#undef CONFIG_USART0
-+#define CONFIG_USART1			1
-+#undef CONFIG_USART2
-+#undef CONFIG_USART3
-+
-+/* User serviceable stuff */
-+#define CONFIG_DOS_PARTITION		1
-+
-+#define CONFIG_CMDLINE_TAG		1
-+#define CONFIG_SETUP_MEMORY_TAGS	1
-+#define CONFIG_INITRD_TAG		1
-+
-+#define CONFIG_STACKSIZE		(2048)
-+
-+#define CONFIG_BAUDRATE			115200
-+#define CONFIG_BOOTARGS							\
-+	"console=ttyS0 root=/dev/mmcblk0p1 rootwait"
-+
-+#define CONFIG_BOOTCOMMAND						\
-+	"mmcinit; ext2load mmc 0:1 0x10400000 /boot/uImage; bootm"
-+
-+/*
-+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
-+ * data on the serial line may interrupt the boot sequence.
-+ */
-+#define CONFIG_BOOTDELAY		1
-+#define CONFIG_AUTOBOOT			1
-+#define CONFIG_AUTOBOOT_KEYED		1
-+#define CONFIG_AUTOBOOT_PROMPT				\
-+	"Press SPACE to abort autoboot in %d seconds\n"
-+#define CONFIG_AUTOBOOT_DELAY_STR	"d"
-+#define CONFIG_AUTOBOOT_STOP_STR	" "
-+
-+/*
-+ * Command line configuration.
-+ */
-+#include <config_cmd_default.h>
-+
-+#define CONFIG_CMD_ASKENV
-+#define CONFIG_CMD_EXT2
-+#define CONFIG_CMD_FAT
-+#define CONFIG_CMD_JFFS2
-+#define CONFIG_CMD_MMC
-+
-+#undef CONFIG_CMD_FPGA
-+#undef CONFIG_CMD_NET
-+#undef CONFIG_CMD_NFS
-+#undef CONFIG_CMD_SETGETDCR
-+#undef CONFIG_CMD_XIMG
-+
-+#define CONFIG_ATMEL_USART		1
-+#define CONFIG_PIO2			1
-+#define CFG_HSDRAMC			1
-+#define CONFIG_MMC			1
-+
-+#define CFG_DCACHE_LINESZ		32
-+#define CFG_ICACHE_LINESZ		32
-+
-+#define CONFIG_NR_DRAM_BANKS		1
-+
-+/* External flash on STK1000 */
-+#if 0
-+#define CFG_FLASH_CFI			1
-+#define CFG_FLASH_CFI_DRIVER		1
-+#endif
-+
-+#define CFG_FLASH_BASE			0x00000000
-+#define CFG_FLASH_SIZE			0x800000
-+#define CFG_MAX_FLASH_BANKS		1
-+#define CFG_MAX_FLASH_SECT		135
-+
-+#define CFG_MONITOR_BASE		CFG_FLASH_BASE
-+
-+#define CFG_INTRAM_BASE			0x24000000
-+#define CFG_INTRAM_SIZE			0x8000
-+
-+#define CFG_SDRAM_BASE			0x10000000
-+
-+#define CFG_ENV_IS_IN_FLASH		1
-+#define CFG_ENV_SIZE			65536
-+#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
-+
-+#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
-+
-+#define CFG_MALLOC_LEN			(256*1024)
-+
-+/* Allow 4MB for the kernel run-time image */
-+#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00400000)
-+#define CFG_BOOTPARAMS_LEN		(16 * 1024)
-+
-+/* Other configuration settings that shouldn't have to change all that often */
-+#define CFG_PROMPT			"Uboot> "
-+#define CFG_CBSIZE			256
-+#define CFG_MAXARGS			16
-+#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-+#define CFG_LONGHELP			1
-+
-+#define CFG_MEMTEST_START		CFG_SDRAM_BASE
-+#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x700000)
-+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
-+
-+#endif /* __CONFIG_H */
-diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
-new file mode 100644
-index 0000000..b81fc21
---- /dev/null
-+++ b/include/configs/atstk1004.h
-@@ -0,0 +1,185 @@
-+/*
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * Configuration settings for the ATSTK1003 CPU daughterboard
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_AVR32			1
-+#define CONFIG_AT32AP			1
-+#define CONFIG_AT32AP7002		1
-+#define CONFIG_ATSTK1004		1
-+#define CONFIG_ATSTK1000		1
-+
-+#define CONFIG_ATSTK1000_EXT_FLASH	1
-+
-+/*
-+ * Timer clock frequency. We're using the CPU-internal COUNT register
-+ * for this, so this is equivalent to the CPU core clock frequency
-+ */
-+#define CFG_HZ				1000
-+
-+/*
-+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
-+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
-+ * PLL frequency.
-+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
-+ */
-+#define CONFIG_PLL			1
-+#define CFG_POWER_MANAGER		1
-+#define CFG_OSC0_HZ			20000000
-+#define CFG_PLL0_DIV			1
-+#define CFG_PLL0_MUL			7
-+#define CFG_PLL0_SUPPRESS_CYCLES	16
-+/*
-+ * Set the CPU running at:
-+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
-+ */
-+#define CFG_CLKDIV_CPU			0
-+/*
-+ * Set the HSB running at:
-+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
-+ */
-+#define CFG_CLKDIV_HSB			1
-+/*
-+ * Set the PBA running at:
-+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
-+ */
-+#define CFG_CLKDIV_PBA			2
-+/*
-+ * Set the PBB running at:
-+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
-+ */
-+#define CFG_CLKDIV_PBB			1
-+
-+/*
-+ * The PLLOPT register controls the PLL like this:
-+ *   icp = PLLOPT<2>
-+ *   ivco = PLLOPT<1:0>
-+ *
-+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
-+ */
-+#define CFG_PLL0_OPT			0x04
-+
-+#undef CONFIG_USART0
-+#define CONFIG_USART1			1
-+#undef CONFIG_USART2
-+#undef CONFIG_USART3
-+
-+/* User serviceable stuff */
-+#define CONFIG_DOS_PARTITION		1
-+
-+#define CONFIG_CMDLINE_TAG		1
-+#define CONFIG_SETUP_MEMORY_TAGS	1
-+#define CONFIG_INITRD_TAG		1
-+
-+#define CONFIG_STACKSIZE		(2048)
-+
-+#define CONFIG_BAUDRATE			115200
-+#define CONFIG_BOOTARGS							\
-+	"console=ttyS0 root=/dev/mmcblk0p1 rootwait"
-+
-+#define CONFIG_BOOTCOMMAND						\
-+	"mmcinit; ext2load mmc 0:1 0x10200000 /boot/uImage; bootm"
-+
-+/*
-+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
-+ * data on the serial line may interrupt the boot sequence.
-+ */
-+#define CONFIG_BOOTDELAY		1
-+#define CONFIG_AUTOBOOT			1
-+#define CONFIG_AUTOBOOT_KEYED		1
-+#define CONFIG_AUTOBOOT_PROMPT				\
-+	"Press SPACE to abort autoboot in %d seconds\n"
-+#define CONFIG_AUTOBOOT_DELAY_STR	"d"
-+#define CONFIG_AUTOBOOT_STOP_STR	" "
-+
-+/*
-+ * Command line configuration.
-+ */
-+#include <config_cmd_default.h>
-+
-+#define CONFIG_CMD_ASKENV
-+#define CONFIG_CMD_EXT2
-+#define CONFIG_CMD_FAT
-+#define CONFIG_CMD_JFFS2
-+#define CONFIG_CMD_MMC
-+
-+#undef CONFIG_CMD_FPGA
-+#undef CONFIG_CMD_NET
-+#undef CONFIG_CMD_NFS
-+#undef CONFIG_CMD_SETGETDCR
-+#undef CONFIG_CMD_XIMG
-+
-+#define CONFIG_ATMEL_USART		1
-+#define CONFIG_PIO2			1
-+#define CFG_HSDRAMC			1
-+#define CONFIG_MMC			1
-+
-+#define CFG_DCACHE_LINESZ		32
-+#define CFG_ICACHE_LINESZ		32
-+
-+#define CONFIG_NR_DRAM_BANKS		1
-+
-+/* External flash on STK1000 */
-+#if 0
-+#define CFG_FLASH_CFI			1
-+#define CFG_FLASH_CFI_DRIVER		1
-+#endif
-+
-+#define CFG_FLASH_BASE			0x00000000
-+#define CFG_FLASH_SIZE			0x800000
-+#define CFG_MAX_FLASH_BANKS		1
-+#define CFG_MAX_FLASH_SECT		135
-+
-+#define CFG_MONITOR_BASE		CFG_FLASH_BASE
-+
-+#define CFG_INTRAM_BASE			0x24000000
-+#define CFG_INTRAM_SIZE			0x8000
-+
-+#define CFG_SDRAM_BASE			0x10000000
-+#define CFG_SDRAM_16BIT			1
-+
-+#define CFG_ENV_IS_IN_FLASH		1
-+#define CFG_ENV_SIZE			65536
-+#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
-+
-+#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
-+
-+#define CFG_MALLOC_LEN			(256*1024)
-+
-+/* Allow 2MB for the kernel run-time image */
-+#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00200000)
-+#define CFG_BOOTPARAMS_LEN		(16 * 1024)
-+
-+/* Other configuration settings that shouldn't have to change all that often */
-+#define CFG_PROMPT			"Uboot> "
-+#define CFG_CBSIZE			256
-+#define CFG_MAXARGS			16
-+#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-+#define CFG_LONGHELP			1
-+
-+#define CFG_MEMTEST_START		CFG_SDRAM_BASE
-+#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x700000)
-+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
-+
-+#endif /* __CONFIG_H */
-diff --git a/lib_avr32/board.c b/lib_avr32/board.c
-index 11d864f..4729e58 100644
---- a/lib_avr32/board.c
-+++ b/lib_avr32/board.c
-@@ -264,6 +264,7 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
- #ifndef CFG_ENV_IS_NOWHERE
- 	extern char * env_name_spec;
- #endif
-+	char *s;
- 	cmd_tbl_t *cmdtp;
- 	bd_t *bd;
- 
-@@ -334,11 +335,20 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
- 	/* initialize environment */
- 	env_relocate();
- 
-+	bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
-+
- 	devices_init();
- 	jumptable_init();
- 	console_init_r();
- 
-+	s = getenv("loadaddr");
-+	if (s)
-+		load_addr = simple_strtoul(s, NULL, 16);
-+
- #if defined(CONFIG_CMD_NET)
-+	s = getenv("bootfile");
-+	if (s)
-+		copy_filename(BootFile, s, sizeof(BootFile));
- #if defined(CONFIG_NET_MULTI)
- 	puts("Net:   ");
- #endif
-diff --git a/net/eth.c b/net/eth.c
-index 1b56a35..3e24a4c 100644
---- a/net/eth.c
-+++ b/net/eth.c
-@@ -60,6 +60,7 @@ extern int npe_initialize(bd_t *);
- extern int uec_initialize(int);
- extern int bfin_EMAC_initialize(bd_t *);
- extern int atstk1000_eth_initialize(bd_t *);
-+extern int atngw100_eth_initialize(bd_t *);
- extern int mcffec_initialize(bd_t*);
- 
- static struct eth_device *eth_devices, *eth_current;
-@@ -254,6 +255,9 @@ int eth_initialize(bd_t *bis)
- #if defined(CONFIG_ATSTK1000)
- 	atstk1000_eth_initialize(bis);
- #endif
-+#if defined(CONFIG_ATNGW100)
-+	atngw100_eth_initialize(bis);
-+#endif
- #if defined(CONFIG_MCFFEC)
- 	mcffec_initialize(bis);
- #endif