summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorThomas Petazzoni <thomas.petazzoni@free-electrons.com>2010-04-04 17:11:33 +0200
committerThomas Petazzoni <thomas.petazzoni@free-electrons.com>2010-06-12 13:21:36 +0200
commitf2d16ae0e17370131e64438cd50d5a6c7ab0ea8d (patch)
tree16abba56c2d28565cd14efa1689913abd5d38bd9
parentdc63ef95f39302195b7430b6be00d250cc5c9aea (diff)
u-boot: support building for mkimage
To build mkimage for the host (which is needed to build an uImage of the kernel), it is not necessary to configure U-Boot, and therefore to have a particular board selected. Therefore, this commit: * Adds a verification at U-Boot configure step that a U-Boot board name has been defined * Sets a default U-Boot version if none has been specified, so that even when U-Boot isn't selected but we want to build mkimage for the host, a particular U-Boot version is picked. * Make the host mkimage target depend only on U-Boot being downloaded/extracted/patched, and the target mkimage/fw_printenv targets depend on U-Boot being fully configured. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-rw-r--r--boot/u-boot/u-boot.mk28
1 files changed, 21 insertions, 7 deletions
diff --git a/boot/u-boot/u-boot.mk b/boot/u-boot/u-boot.mk
index ac16c8bf4..00724bae6 100644
--- a/boot/u-boot/u-boot.mk
+++ b/boot/u-boot/u-boot.mk
@@ -4,6 +4,15 @@
#
#############################################################
U_BOOT_VERSION:=$(call qstrip,$(BR2_UBOOT_VERSION))
+U_BOOT_BOARD_NAME:=$(call qstrip,$(BR2_TARGET_UBOOT_BOARDNAME))
+
+# U-Boot may not be selected in the configuration, but mkimage might
+# be needed to build/prepare a kernel image. In this case, we just
+# pick some random stable U-Boot version that will be used just to
+# build mkimage.
+ifeq ($(U_BOOT_VERSION),)
+U_BOOT_VERSION=2010.03
+endif
U_BOOT_SOURCE:=u-boot-$(U_BOOT_VERSION).tar.bz2
@@ -30,9 +39,6 @@ TARGET_UBOOT_ETHADDR:=$(call qstrip,$(BR2_TARGET_UBOOT_ETHADDR))
# u-boot still uses arch=ppc for powerpc
U_BOOT_ARCH=$(KERNEL_ARCH:powerpc=ppc)
-ifeq ($(UBOOT_BOARD_NAME),)
-UBOOT_BOARD_NAME:=$(call qstrip,$(BR2_TARGET_UBOOT_BOARDNAME))
-endif
U_BOOT_INC_CONF_FILE:=$(U_BOOT_DIR)/include/config.h
@@ -73,6 +79,9 @@ endif
touch $@
$(U_BOOT_DIR)/.configured: $(U_BOOT_DIR)/.patched
+ifeq ($(U_BOOT_BOARD_NAME),)
+ $(error NO U-Boot board name set. Check your BR2_TARGET_UBOOT_BOARDNAME setting)
+endif
$(TARGET_CONFIGURE_OPTS) \
CFLAGS="$(TARGET_CFLAGS)" \
LDFLAGS="$(TARGET_LDFLAGS)" \
@@ -154,11 +163,16 @@ $(BINARIES_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/$(U_BOOT_BIN)
rm -f $(BINARIES_DIR)/$(U_BOOT_BIN)
cp -dpf $(U_BOOT_DIR)/$(U_BOOT_BIN) $(BINARIES_DIR)/
-$(U_BOOT_TOOLS): $(U_BOOT_DIR)/$(U_BOOT_BIN)
+# Build just mkimage for the host. It might have already been built by
+# the U-Boot build procedure, but mkimage may also be needed even if
+# U-Boot isn't selected in the configuration, to generate a kernel
+# uImage.
+$(MKIMAGE): $(U_BOOT_DIR)/.patched
mkdir -p $(@D)
- cp -dpf $(U_BOOT_DIR)/tools/mkimage $@
+ $(MAKE) -C $(U_BOOT_DIR) tools
+ cp -dpf $(U_BOOT_DIR)/tools/mkimage $(@D)
-$(TARGET_DIR)/usr/bin/mkimage: $(U_BOOT_DIR)/$(U_BOOT_BIN)
+$(TARGET_DIR)/usr/bin/mkimage: $(U_BOOT_DIR)/.configured
mkdir -p $(@D)
$(TARGET_CC) -I$(U_BOOT_DIR)/include -I$(U_BOOT_DIR)/tools \
-DUSE_HOSTCC -o $@ \
@@ -171,7 +185,7 @@ $(TARGET_DIR)/usr/bin/mkimage: $(U_BOOT_DIR)/$(U_BOOT_BIN)
$(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $@
-$(TARGET_DIR)/usr/sbin/fw_printenv: $(U_BOOT_DIR)/$(U_BOOT_BIN)
+$(TARGET_DIR)/usr/sbin/fw_printenv: $(U_BOOT_DIR)/.configured
mkdir -p $(@D)
$(TARGET_CC) -I$(U_BOOT_DIR)/include -I$(LINUX_HEADERS_DIR)/include \
-DUSE_HOSTCC -o $@ \