Add 2.6.27.7 patches for AVR32

7 files changed, 26968 insertions, 0 deletions

diff --git a/target/device/Atmel/arch-avr32/Config.in.linux.patches b/target/device/Atmel/arch-avr32/Config.in.linux.patches
index 5e5a39ec3..a8bcdbf1b 100644
--- a/target/device/Atmel/arch-avr32/Config.in.linux.patches
+++ b/target/device/Atmel/arch-avr32/Config.in.linux.patches
@@ -2,6 +2,7 @@ choice
 	prompt "Add AVR32 specific patches"
 	depends on BR2_KERNEL_ARCH_PATCH_ENABLED
 	depends on BR2_avr32
+	default BR2_ARCH_AVR32_2_6_27_6		if BR2_LINUX_2_6_27_6
 	default BR2_ARCH_AVR32_2_6_25_10	if BR2_LINUX_2_6_25
 	default BR2_ARCH_AVR32_2_6_24		if BR2_LINUX_2_6_24
 	default BR2_ARCH_AVR32_2_6_23		if BR2_LINUX_2_6_23
@@ -13,6 +14,11 @@ choice
 	help
 	  Select a patch to add to the Linux kernel
 
+config	BR2_ARCH_AVR32_2_6_27_6
+	bool "2.6.27.6"
+	help
+	  Apply the avr32 linux-2.6.27.6 patches
+
 config	BR2_ARCH_AVR32_2_6_25_10
 	bool "2.6.25.10"
 	help
@@ -54,6 +60,7 @@ config	BR2_KERNEL_ARCH_PATCH_VERSION
 	string
 	depends on BR2_KERNEL_ARCH_PATCH_ENABLED
 	depends on BR2_avr32
+	default "2.6.27.6"	if BR2_ARCH_AVR32_2_6_27_6
 	default "2.6.25.10"	if BR2_ARCH_AVR32_2_6_25_10
 	default "2.6.24"	if BR2_ARCH_AVR32_2_6_24
 	default "2.6.22.10"	if BR2_ARCH_AVR32_2_6_22_10
diff --git a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-100-avr32-atmel.1.patch b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-100-avr32-atmel.1.patch
new file mode 100644
index 000000000..11bcdae04
--- /dev/null
+++ b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-100-avr32-atmel.1.patch
@@ -0,0 +1,26786 @@
+diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
+index dbfd9f7..b2a96fe 100644
+--- a/arch/arm/mach-at91/include/mach/cpu.h
++++ b/arch/arm/mach-at91/include/mach/cpu.h
+@@ -99,5 +99,6 @@ static inline unsigned long at91_arch_identify(void)
+  * definitions may reduce clutter in common drivers.
+  */
+ #define cpu_is_at32ap7000()	(0)
++#define cpu_is_at32ap7200()	(0)
+ 
+ #endif
+diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
+index 7c239a9..6cef643 100644
+--- a/arch/avr32/Kconfig
++++ b/arch/avr32/Kconfig
+@@ -83,6 +83,18 @@ config MMU
+ config PERFORMANCE_COUNTERS
+ 	bool
+ 
++# The old "PIO" portmux/GPIO module used on AT32AP700x
++config PORTMUX_PIO
++	bool
++
++# The new "GPIO" portmux/GPIO module, version 2
++config PORTMUX_GPIO_V2
++	bool
++
++# Asynchronous Timer clocksource/clockevent driver
++config TIMER_AST
++	bool
++
+ config PLATFORM_AT32AP
+ 	bool
+ 	select SUBARCH_AVR32B
+@@ -99,6 +111,7 @@ config PLATFORM_AT32AP
+ config CPU_AT32AP700X
+ 	bool
+ 	select PLATFORM_AT32AP
++	select PORTMUX_PIO
+ config CPU_AT32AP7000
+ 	bool
+ 	select CPU_AT32AP700X
+@@ -109,6 +122,16 @@ config CPU_AT32AP7002
+ 	bool
+ 	select CPU_AT32AP700X
+ 
++# AP7200 derivatives
++config CPU_AT32AP720X
++	bool
++	select PLATFORM_AT32AP
++	select TIMER_AST
++	select PORTMUX_GPIO_V2
++config CPU_AT32AP7200
++	bool
++	select CPU_AT32AP720X
++
+ choice
+ 	prompt "AVR32 board type"
+ 	default BOARD_ATSTK1000
+@@ -119,11 +142,19 @@ config BOARD_ATSTK1000
+ config BOARD_ATNGW100
+ 	bool "ATNGW100 Network Gateway"
+ 	select CPU_AT32AP7000
++
++config BOARD_FAVR_32
++	bool "Favr-32 LCD-board"
++	select CPU_AT32AP7000
++
++config BOARD_MIMC200
++	bool "MIMC200 CPU board"
++	select CPU_AT32AP7000
+ endchoice
+ 
+-if BOARD_ATSTK1000
+ source "arch/avr32/boards/atstk1000/Kconfig"
+-endif
++source "arch/avr32/boards/atngw100/Kconfig"
++source "arch/avr32/boards/favr-32/Kconfig"
+ 
+ choice
+ 	prompt "Boot loader type"
+@@ -138,14 +169,17 @@ source "arch/avr32/mach-at32ap/Kconfig"
+ config LOAD_ADDRESS
+ 	hex
+ 	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
++	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP720X=y
+ 
+ config ENTRY_ADDRESS
+ 	hex
+ 	default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
++	default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP720X=y
+ 
+ config PHYS_OFFSET
+ 	hex
+ 	default 0x10000000 if CPU_AT32AP700X=y
++	default 0x10000000 if CPU_AT32AP720X=y
+ 
+ source "kernel/Kconfig.preempt"
+ 
+diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
+index c9e1f0b..b088e10 100644
+--- a/arch/avr32/Makefile
++++ b/arch/avr32/Makefile
+@@ -33,6 +33,8 @@ head-y					+= arch/avr32/kernel/head.o
+ core-y					+= $(machdirs)
+ core-$(CONFIG_BOARD_ATSTK1000)		+= arch/avr32/boards/atstk1000/
+ core-$(CONFIG_BOARD_ATNGW100)		+= arch/avr32/boards/atngw100/
++core-$(CONFIG_BOARD_FAVR_32)		+= arch/avr32/boards/favr-32/
++core-$(CONFIG_BOARD_MIMC200)		+= arch/avr32/boards/mimc200/
+ core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
+ core-y					+= arch/avr32/kernel/
+ core-y					+= arch/avr32/mm/
+diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig
+new file mode 100644
+index 0000000..b3f9947
+--- /dev/null
++++ b/arch/avr32/boards/atngw100/Kconfig
+@@ -0,0 +1,35 @@
++# NGW100 customization
++
++if BOARD_ATNGW100
++
++config BOARD_ATNGW100_EVKLCD10X
++	bool "Add support for EVKLCD10X addon board"
++	help
++	  This enables support for the EVKLCD100 (QVGA) or EVKLCD101 (VGA)
++	  addon board for the NGW100. By enabling this the LCD controller and
++	  AC97 controller is added as platform devices.
++
++	  This choice disables the detect pin and the write-protect pin for the
++	  MCI platform device, since it conflicts with the LCD platform device.
++	  The MCI pins can be reenabled by editing the "add device function" but
++	  this may break the setup for other displays that use these pins.
++
++	  Choose 'Y' here if you have a EVKLCD100/101 connected to the NGW100.
++
++choice
++	prompt "LCD panel resolution on EVKLCD10X"
++	depends on BOARD_ATNGW100_EVKLCD10X
++	default BOARD_ATNGW100_EVKLCD10X_VGA
++
++config BOARD_ATNGW100_EVKLCD10X_QVGA
++	bool "QVGA (320x240)"
++
++config BOARD_ATNGW100_EVKLCD10X_VGA
++	bool "VGA (640x480)"
++
++config BOARD_ATNGW100_EVKLCD10X_POW_QVGA
++	bool "Powertip QVGA (320x240)"
++
++endchoice
++
++endif	# BOARD_ATNGW100
+diff --git a/arch/avr32/boards/atngw100/Makefile b/arch/avr32/boards/atngw100/Makefile
+index c740aa1..6376f53 100644
+--- a/arch/avr32/boards/atngw100/Makefile
++++ b/arch/avr32/boards/atngw100/Makefile
+@@ -1 +1,2 @@
+-obj-y				+= setup.o flash.o
++obj-y					+= setup.o flash.o
++obj-$(CONFIG_BOARD_ATNGW100_EVKLCD10X)	+= evklcd10x.o
+diff --git a/arch/avr32/boards/atngw100/evklcd10x.c b/arch/avr32/boards/atngw100/evklcd10x.c
+new file mode 100644
+index 0000000..8140b22
+--- /dev/null
++++ b/arch/avr32/boards/atngw100/evklcd10x.c
+@@ -0,0 +1,155 @@
++/*
++ * Board-specific setup code for the ATEVKLCD10X addon board to the ATNGW100
++ * Network Gateway
++ *
++ * Copyright (C) 2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/linkage.h>
++#include <linux/fb.h>
++#include <linux/platform_device.h>
++
++#include <video/atmel_lcdc.h>
++
++#include <asm/setup.h>
++
++#include <mach/at32ap700x.h>
++#include <mach/board.h>
++
++static struct ac97c_platform_data __initdata ac97c0_data = {
++	.dma_rx_periph_id	= 3,
++	.dma_tx_periph_id	= 4,
++	.dma_controller_id	= 0,
++	.reset_pin		= GPIO_PIN_PB(19),
++};
++
++#ifdef CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA
++static struct fb_videomode __initdata tcg057vglad_modes[] = {
++	{
++		.name		= "640x480 @ 60",
++		.refresh	= 60,
++		.xres		= 640,		.yres		= 480,
++		.pixclock	= KHZ2PICOS(25180),
++
++		.left_margin	= 64,		.right_margin	= 31,
++		.upper_margin	= 34,		.lower_margin	= 2,
++		.hsync_len	= 96,		.vsync_len	= 4,
++
++		.sync		= 0,
++		.vmode		= FB_VMODE_NONINTERLACED,
++	},
++};
++
++static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
++	.manufacturer		= "KYO",
++	.monitor		= "TCG057VGLAD",
++	.modedb			= tcg057vglad_modes,
++	.modedb_len		= ARRAY_SIZE(tcg057vglad_modes),
++	.hfmin			= 19948,
++	.hfmax			= 31478,
++	.vfmin			= 50,
++	.vfmax			= 67,
++	.dclkmax		= 28330000,
++};
++
++static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
++	.default_bpp		= 16,
++	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
++	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
++				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
++				   | ATMEL_LCDC_MEMOR_BIG),
++	.default_monspecs	= &atevklcd10x_default_monspecs,
++	.guard_time		= 2,
++};
++#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA
++static struct fb_videomode __initdata tcg057qvlad_modes[] = {
++	{
++		.name		= "320x240 @ 60",
++		.refresh	= 60,
++		.xres		= 320,		.yres		= 240,
++		.pixclock	= KHZ2PICOS(6300),
++
++		.left_margin	= 52,		.right_margin	= 28,
++		.upper_margin	= 7,		.lower_margin	= 2,
++		.hsync_len	= 96,		.vsync_len	= 4,
++
++		.sync		= 0,
++		.vmode		= FB_VMODE_NONINTERLACED,
++	},
++};
++
++static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
++	.manufacturer		= "KYO",
++	.monitor		= "TCG057QVLAD",
++	.modedb			= tcg057qvlad_modes,
++	.modedb_len		= ARRAY_SIZE(tcg057qvlad_modes),
++	.hfmin			= 19948,
++	.hfmax			= 31478,
++	.vfmin			= 50,
++	.vfmax			= 67,
++	.dclkmax		= 7000000,
++};
++
++static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
++	.default_bpp		= 16,
++	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
++	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
++				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
++				   | ATMEL_LCDC_MEMOR_BIG),
++	.default_monspecs	= &atevklcd10x_default_monspecs,
++	.guard_time		= 2,
++};
++#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA
++static struct fb_videomode __initdata ph320240t_modes[] = {
++	{
++		.name		= "320x240 @ 60",
++		.refresh	= 60,
++		.xres		= 320,		.yres		= 240,
++		.pixclock	= KHZ2PICOS(6300),
++
++		.left_margin	= 38,		.right_margin	= 20,
++		.upper_margin	= 15,		.lower_margin	= 5,
++		.hsync_len	= 30,		.vsync_len	= 3,
++
++		.sync		= 0,
++		.vmode		= FB_VMODE_NONINTERLACED,
++	},
++};
++
++static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
++	.manufacturer		= "POW",
++	.monitor		= "PH320240T",
++	.modedb			= ph320240t_modes,
++	.modedb_len		= ARRAY_SIZE(ph320240t_modes),
++	.hfmin			= 14400,
++	.hfmax			= 21600,
++	.vfmin			= 50,
++	.vfmax			= 90,
++	.dclkmax		= 6400000,
++};
++
++static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
++	.default_bpp		= 16,
++	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
++	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
++				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
++				   | ATMEL_LCDC_MEMOR_BIG),
++	.default_monspecs	= &atevklcd10x_default_monspecs,
++	.guard_time		= 2,
++};
++#endif
++
++static int __init atevklcd10x_init(void)
++{
++	at32_add_device_ac97c(0, &ac97c0_data);
++
++	at32_add_device_lcdc(0, &atevklcd10x_lcdc_data,
++			fbmem_start, fbmem_size, 1);
++	return 0;
++}
++postcore_initcall(atevklcd10x_init);
+diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
+index b8286f1..32fb9ba 100644
+--- a/arch/avr32/boards/atngw100/setup.c
++++ b/arch/avr32/boards/atngw100/setup.c
+@@ -9,6 +9,7 @@
+  */
+ #include <linux/clk.h>
+ #include <linux/etherdevice.h>
++#include <linux/gpio.h>
+ #include <linux/irq.h>
+ #include <linux/i2c.h>
+ #include <linux/i2c-gpio.h>
+@@ -53,8 +54,16 @@ static struct spi_board_info spi0_board_info[] __initdata = {
+ };
+ 
+ static struct mci_platform_data __initdata mci0_data = {
+-	.detect_pin	= GPIO_PIN_PC(25),
+-	.wp_pin		= GPIO_PIN_PE(0),
++	.slot[0] = {
++		.bus_width	= 4,
++#ifndef CONFIG_BOARD_ATNGW100_EVKLCD10X
++		.detect_pin	= GPIO_PIN_PC(25),
++		.wp_pin		= GPIO_PIN_PE(0),
++#else
++		.detect_pin	= GPIO_PIN_NONE,
++		.wp_pin		= GPIO_PIN_NONE,
++#endif
++	},
+ };
+ 
+ /*
+@@ -168,8 +177,6 @@ static int __init atngw100_init(void)
+ 	 * reserve any pins for it.
+ 	 */
+ 
+-	at32_add_system_devices();
+-
+ 	at32_add_device_usart(0);
+ 
+ 	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+@@ -190,7 +197,7 @@ static int __init atngw100_init(void)
+ 	 * PB28/EXTINT3 doesn't; it should be SMBALERT# (for PMBus),
+ 	 * but it's not available off-board.
+ 	 */
+-	at32_select_periph(GPIO_PIN_PB(28), 0, AT32_GPIOF_PULLUP);
++	at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP);
+ 	at32_select_gpio(i2c_gpio_data.sda_pin,
+ 		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ 	at32_select_gpio(i2c_gpio_data.scl_pin,
+@@ -204,6 +211,15 @@ postcore_initcall(atngw100_init);
+ 
+ static int __init atngw100_arch_init(void)
+ {
++	/* PB30 is the otherwise unused jumper on the mainboard, with an
++	 * external pullup; the jumper grounds it.  Use it however you
++	 * like, including letting U-Boot or Linux tweak boot sequences.
++	 */
++	at32_select_gpio(GPIO_PIN_PB(30), 0);
++	gpio_request(GPIO_PIN_PB(30), "j15");
++	gpio_direction_input(GPIO_PIN_PB(30));
++	gpio_export(GPIO_PIN_PB(30), false);
++
+ 	/* set_irq_type() after the arch_initcall for EIC has run, and
+ 	 * before the I2C subsystem could try using this IRQ.
+ 	 */
+diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
+index 8dc4821..0884884 100644
+--- a/arch/avr32/boards/atstk1000/Kconfig
++++ b/arch/avr32/boards/atstk1000/Kconfig
+@@ -18,6 +18,10 @@ config BOARD_ATSTK1004
+ 	bool "ATSTK1004"
+ 	select CPU_AT32AP7002
+ 
++config BOARD_ATSTK1005
++	bool "ATSTK1005"
++	select CPU_AT32AP7200
++
+ config BOARD_ATSTK1006
+ 	bool "ATSTK1006"
+ 	select CPU_AT32AP7000
+diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile
+index edecee0..d0f248d 100644
+--- a/arch/avr32/boards/atstk1000/Makefile
++++ b/arch/avr32/boards/atstk1000/Makefile
+@@ -2,4 +2,5 @@ obj-y				+= setup.o flash.o
+ obj-$(CONFIG_BOARD_ATSTK1002)	+= atstk1002.o
+ obj-$(CONFIG_BOARD_ATSTK1003)	+= atstk1003.o
+ obj-$(CONFIG_BOARD_ATSTK1004)	+= atstk1004.o
++obj-$(CONFIG_BOARD_ATSTK1005)	+= atstk1005.o
+ obj-$(CONFIG_BOARD_ATSTK1006)	+= atstk1002.o
+diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
+index dfc3443..11e7800 100644
+--- a/arch/avr32/boards/atstk1000/atstk1002.c
++++ b/arch/avr32/boards/atstk1000/atstk1002.c
+@@ -232,7 +232,7 @@ static void __init atstk1002_setup_extdac(void)
+ 		goto err_set_clk;
+ 	}
+ 
+-	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
+ 	at73c213_data.dac_clk = gclk;
+ 
+ err_set_clk:
+@@ -264,16 +264,20 @@ void __init setup_board(void)
+ 
+ #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+ 
++static struct mci_platform_data __initdata mci0_data = {
++	.slot[0] = {
++		.bus_width	= 4,
++
+ /* MMC card detect requires MACB0 *NOT* be used */
+ #ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
+-static struct mci_platform_data __initdata mci0_data = {
+-	.detect_pin	= GPIO_PIN_PC(14),	/* gpio30/sdcd */
+-	.wp_pin		= GPIO_PIN_PC(15),	/* gpio31/sdwp */
+-};
+-#define MCI_PDATA	&mci0_data
++		.detect_pin	= GPIO_PIN_PC(14), /* gpio30/sdcd */
++		.wp_pin		= GPIO_PIN_PC(15), /* gpio31/sdwp */
+ #else
+-#define MCI_PDATA	NULL
++		.detect_pin	= -ENODEV,
++		.wp_pin		= -ENODEV,
+ #endif	/* SW6 for sd{cd,wp} routing */
++	},
++};
+ 
+ #endif	/* SW2 for MMC signal routing */
+ 
+@@ -283,25 +287,7 @@ static int __init atstk1002_init(void)
+ 	 * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
+ 	 * SDRAM-specific pins so that nobody messes with them.
+ 	 */
+-	at32_reserve_pin(GPIO_PIN_PE(0));	/* DATA[16]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(1));	/* DATA[17]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(2));	/* DATA[18]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(3));	/* DATA[19]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(4));	/* DATA[20]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(5));	/* DATA[21]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(6));	/* DATA[22]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(7));	/* DATA[23]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(8));	/* DATA[24]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(9));	/* DATA[25]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(10));	/* DATA[26]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(11));	/* DATA[27]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(12));	/* DATA[28]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(13));	/* DATA[29]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(14));	/* DATA[30]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
+-
+-	at32_add_system_devices();
++	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
+ 
+ #ifdef CONFIG_BOARD_ATSTK1006
+ 	smc_set_timing(&nand_config, &nand_timing);
+@@ -326,13 +312,14 @@ static int __init atstk1002_init(void)
+ 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
+ #endif
+ #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+-	at32_add_device_mci(0, MCI_PDATA);
++	at32_add_device_mci(0, &mci0_data);
+ #endif
+ #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
+ 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
+ #else
+ 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
+-			     fbmem_start, fbmem_size, 0);
++			     fbmem_start, fbmem_size,
++			     ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
+ #endif
+ 	at32_add_device_usba(0, NULL);
+ #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
+diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
+index 0cf6641..ac31666 100644
+--- a/arch/avr32/boards/atstk1000/atstk1003.c
++++ b/arch/avr32/boards/atstk1000/atstk1003.c
+@@ -19,6 +19,7 @@
+ #include <linux/spi/spi.h>
+ 
+ #include <asm/setup.h>
++#include <asm/atmel-mci.h>
+ 
+ #include <mach/at32ap700x.h>
+ #include <mach/board.h>
+@@ -66,6 +67,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { {
+ } };
+ #endif
+ 
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++static struct mci_platform_data __initdata mci0_data = {
++	.slot[0] = {
++		.bus_width	= 4,
++		.detect_pin	= -ENODEV,
++		.wp_pin		= -ENODEV,
++	},
++};
++#endif
++
+ #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+ static void __init atstk1003_setup_extdac(void)
+ {
+@@ -84,7 +95,7 @@ static void __init atstk1003_setup_extdac(void)
+ 		goto err_set_clk;
+ 	}
+ 
+-	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
+ 	at73c213_data.dac_clk = gclk;
+ 
+ err_set_clk:
+@@ -120,25 +131,7 @@ static int __init atstk1003_init(void)
+ 	 * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
+ 	 * SDRAM-specific pins so that nobody messes with them.
+ 	 */
+-	at32_reserve_pin(GPIO_PIN_PE(0));	/* DATA[16]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(1));	/* DATA[17]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(2));	/* DATA[18]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(3));	/* DATA[19]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(4));	/* DATA[20]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(5));	/* DATA[21]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(6));	/* DATA[22]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(7));	/* DATA[23]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(8));	/* DATA[24]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(9));	/* DATA[25]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(10));	/* DATA[26]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(11));	/* DATA[27]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(12));	/* DATA[28]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(13));	/* DATA[29]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(14));	/* DATA[30]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
+-	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
+-
+-	at32_add_system_devices();
++	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
+ 
+ #ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+ 	at32_add_device_usart(1);
+@@ -154,7 +147,7 @@ static int __init atstk1003_init(void)
+ 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
+ #endif
+ #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+-	at32_add_device_mci(0, NULL);
++	at32_add_device_mci(0, &mci0_data);
+ #endif
+ 	at32_add_device_usba(0, NULL);
+ #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
+diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
+index 50a5273..cb32eb8 100644
+--- a/arch/avr32/boards/atstk1000/atstk1004.c
++++ b/arch/avr32/boards/atstk1000/atstk1004.c
+@@ -21,6 +21,7 @@
+ #include <video/atmel_lcdc.h>
+ 
+ #include <asm/setup.h>
++#include <asm/atmel-mci.h>
+ 
+ #include <mach/at32ap700x.h>
+ #include <mach/board.h>
+@@ -71,6 +72,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { {
+ } };
+ #endif
+ 
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++static struct mci_platform_data __initdata mci0_data = {
++	.slot[0] = {
++		.bus_width	= 4,
++		.detect_pin	= -ENODEV,
++		.wp_pin		= -ENODEV,
++	},
++};
++#endif
++
+ #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+ static void __init atstk1004_setup_extdac(void)
+ {
+@@ -89,7 +100,7 @@ static void __init atstk1004_setup_extdac(void)
+ 		goto err_set_clk;
+ 	}
+ 
+-	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
+ 	at73c213_data.dac_clk = gclk;
+ 
+ err_set_clk:
+@@ -121,8 +132,6 @@ void __init setup_board(void)
+ 
+ static int __init atstk1004_init(void)
+ {
+-	at32_add_system_devices();
+-
+ #ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+ 	at32_add_device_usart(1);
+ #else
+@@ -137,10 +146,11 @@ static int __init atstk1004_init(void)
+ 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
+ #endif
+ #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+-	at32_add_device_mci(0, NULL);
++	at32_add_device_mci(0, &mci0_data);
+ #endif
+ 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
+-			     fbmem_start, fbmem_size, 0);
++			     fbmem_start, fbmem_size,
++			     ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
+ 	at32_add_device_usba(0, NULL);
+ #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
+ 	at32_add_device_ssc(0, ATMEL_SSC_TX);
+diff --git a/arch/avr32/boards/atstk1000/atstk1005.c b/arch/avr32/boards/atstk1000/atstk1005.c
+new file mode 100644
+index 0000000..f5a9baa
+--- /dev/null
++++ b/arch/avr32/boards/atstk1000/atstk1005.c
+@@ -0,0 +1,225 @@
++/*
++ * ATSTK1005 daughterboard-specific init code
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/device.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/list.h>
++#include <linux/string.h>
++#include <linux/mtd/partitions.h>
++#include <linux/spi/spi.h>
++
++#include <asm/atmel-mci.h>
++#include <asm/setup.h>
++
++#include <mach/at32ap720x.h>
++#include <mach/board.h>
++#include <mach/init.h>
++#include <mach/portmux.h>
++#include <mach/smc.h>
++
++#include "atstk1000.h"
++
++/* Oscillator frequencies. These are board specific */
++unsigned long at32_board_osc_rates[4] = {
++	[0] = 20000000,	/* 20 MHz on osc0 */
++	[1] = 0,	/* Nothing on osc1 */
++	[2] = 12000000,	/* 12 MHz on osc2 */
++	[3] = 32768,	/* 32.768 kHz on RTC osc */
++};
++
++struct eth_addr {
++	u8 addr[6];
++};
++
++static struct eth_addr __initdata hw_addr;
++static struct eth_platform_data __initdata eth_data;
++
++static struct mci_platform_data mci_data __initdata = {
++	.slot[0]	= {
++		.detect_pin		= GPIO_PIN_NONE,
++		.wp_pin			= GPIO_PIN_NONE,
++		.bus_width		= 4,
++	},
++	.slot[1]	= {
++		.detect_pin		= GPIO_PIN_PA(30),
++		.wp_pin			= GPIO_PIN_PA(31),
++		.bus_width		= 8,
++	},
++};
++
++static struct spi_board_info spi0_board_info[] __initdata = {
++	{
++		/* AT45DB642D: 8MB DataFlash */
++		.modalias	= "mtd_dataflash",
++		.max_speed_hz	= 8000000,
++		.chip_select	= 0,
++		.mode		= SPI_MODE_0,
++	}, {
++		/* QVGA display */
++		.modalias	= "ltv350qv",
++		.max_speed_hz	= 8000000,
++		.chip_select	= 2,
++		.mode		= SPI_MODE_3,
++	},
++};
++
++static struct smc_timing nand_timing __initdata = {
++	.ncs_read_setup		= 0,
++	.nrd_setup		= 10,
++	.ncs_write_setup	= 0,
++	.nwe_setup		= 10,
++
++	.ncs_read_pulse		= 30,
++	.nrd_pulse		= 15,
++	.ncs_write_pulse	= 30,
++	.nwe_pulse		= 15,
++
++	.read_cycle		= 30,
++	.write_cycle		= 30,
++
++	.ncs_read_recover	= 0,
++	.nrd_recover		= 15,
++	.ncs_write_recover	= 0,
++	.nwe_recover		= 50,
++};
++
++static struct smc_config nand_config __initdata = {
++	.bus_width		= 1,
++	.nrd_controlled		= 1,
++	.nwe_controlled		= 1,
++	.nwait_mode		= 0,
++	.byte_write		= 0,
++	.tdf_cycles		= 3,
++	.tdf_mode		= 0,
++};
++
++static struct mtd_partition nand_partitions[] = {
++	{
++		.name	= "u-boot",
++		.offset	= 0,
++		.size	= 131072,
++	}, {
++		.name	= "kernel",
++		.offset	= 262144,
++		.size	= 2097152,
++	}, {
++		.name	= "user",
++		.offset	= 2359296,
++		.size	= MTDPART_SIZ_FULL,
++	},
++};
++
++/* Isn't this rather more complicated than necessary? */
++static struct mtd_partition *nand_part_info(int size, int *num_partitions)
++{
++	*num_partitions = ARRAY_SIZE(nand_partitions);
++	return nand_partitions;
++}
++
++static struct atmel_nand_data nand_data __initdata = {
++	.cle		= 21,
++	.ale		= 22,
++	.rdy_pin	= GPIO_PIN_PE(31),
++	.enable_pin	= GPIO_PIN_PF(2),
++	.det_pin	= GPIO_PIN_NONE,
++	.partition_info	= nand_part_info,
++};
++
++
++/*
++ * Grab ethernet address and PHY address provided by the boot loader.
++ */
++static int __init parse_tag_ethernet(struct tag *tag)
++{
++	struct tag_ethernet *etag = &tag->u.ethernet;
++
++	if (etag->mac_index == 0) {
++		eth_data.phy_mask = ~(1U << etag->mii_phy_addr);
++		memcpy(&hw_addr.addr, etag->hw_address, sizeof(hw_addr.addr));
++	}
++
++	return 0;
++}
++__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
++
++/*
++ * We need to get rid of this crap and pass the mac address to the
++ * driver explicitly.
++ */
++#include <linux/clk.h>
++#include <linux/etherdevice.h>
++#include <linux/io.h>
++#include <linux/ioport.h>
++#include <linux/platform_device.h>
++static void __init set_hw_addr(struct platform_device *pdev)
++{
++	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	const u8 *addr;
++	void __iomem *regs;
++	struct clk *pclk;
++
++	if (!res)
++		return;
++	if (pdev->id != 0)
++		return;
++
++	addr = hw_addr.addr;
++	if (!is_valid_ether_addr(addr))
++		return;
++
++	/*
++	 * Since this is board-specific code, we'll cheat and use the
++	 * physical address directly as we happen to know that it's
++	 * the same as the virtual address.
++	 */
++	regs = (void __iomem __force *)res->start;
++	pclk = clk_get(&pdev->dev, "pclk");
++	if (!pclk)
++		return;
++
++	clk_enable(pclk);
++	__raw_writel((addr[3] << 24) | (addr[2] << 16)
++		     | (addr[1] << 8) | addr[0], regs + 0x98);
++	__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
++	clk_disable(pclk);
++	clk_put(pclk);
++}
++
++void __init setup_board(void)
++{
++	at32_map_usart(4, 0);	/* USART4: /dev/ttyS0, DB9 */
++	at32_setup_serial_console(0);
++}
++
++static int __init atstk1005_init(void)
++{
++	struct platform_device	*lcdc_pdev;
++
++	at32_add_device_usart(0);
++
++	set_hw_addr(at32_add_device_eth(0, &eth_data));
++	lcdc_pdev = at32_add_device_lcdc(0, &atstk1000_lcdc_data,
++			fbmem_start, fbmem_size, 0);
++	at32_add_device_mpop(0, lcdc_pdev, fbmem_start, fbmem_size);
++	at32_add_device_mci(0, &mci_data);
++	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++
++	/* NAND Flash */
++	smc_set_timing(&nand_config, &nand_timing);
++	smc_set_configuration(3, &nand_config);
++	at32_add_device_nand(0, &nand_data);
++
++	/* USB OHCI/EHCI host */
++	at32_add_device_ohci(0);
++	at32_add_device_ehci(0);
++
++	return 0;
++}
++postcore_initcall(atstk1005_init);
+diff --git a/arch/avr32/boards/favr-32/Kconfig b/arch/avr32/boards/favr-32/Kconfig
+new file mode 100644
+index 0000000..2c83d1d
+--- /dev/null
++++ b/arch/avr32/boards/favr-32/Kconfig
+@@ -0,0 +1,22 @@
++# Favr-32 customization
++
++if BOARD_FAVR_32
++
++config BOARD_FAVR32_ABDAC_RATE
++	int "DAC target rate"
++	default 44100
++	range 32000 50000
++	help
++	  Specify the target rate the internal DAC should try to match. This
++	  will use PLL1 to generate a frequency as close as possible to this
++	  rate.
++
++	  Must be within the range 32000 to 50000, which should be suitable to
++	  generate most other frequencies in power of 2 steps.
++
++	  Ex:
++		48000 will also suit 24000 and 12000
++		44100 will also suit 22050 and 11025
++		32000 will also suit 16000 and 8000
++
++endif # BOARD_FAVR_32
+diff --git a/arch/avr32/boards/favr-32/Makefile b/arch/avr32/boards/favr-32/Makefile
+new file mode 100644
+index 0000000..234f215
+--- /dev/null
++++ b/arch/avr32/boards/favr-32/Makefile
+@@ -0,0 +1 @@
++obj-y	+= setup.o flash.o
+diff --git a/arch/avr32/boards/favr-32/flash.c b/arch/avr32/boards/favr-32/flash.c
+new file mode 100644
+index 0000000..604bbd5
+--- /dev/null
++++ b/arch/avr32/boards/favr-32/flash.c
+@@ -0,0 +1,98 @@
++/*
++ * Favr-32 board-specific flash initialization
++ *
++ * Copyright (C) 2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++
++#include <mach/smc.h>
++
++static struct smc_timing flash_timing __initdata = {
++	.ncs_read_setup		= 0,
++	.nrd_setup		= 40,
++	.ncs_write_setup	= 0,
++	.nwe_setup		= 10,
++
++	.ncs_read_pulse		= 80,
++	.nrd_pulse		= 40,
++	.ncs_write_pulse	= 65,
++	.nwe_pulse		= 55,
++
++	.read_cycle		= 120,
++	.write_cycle		= 120,
++};
++
++static struct smc_config flash_config __initdata = {
++	.bus_width		= 2,
++	.nrd_controlled		= 1,
++	.nwe_controlled		= 1,
++	.byte_write		= 1,
++};
++
++static struct mtd_partition flash_parts[] = {
++	{
++		.name           = "u-boot",
++		.offset         = 0x00000000,
++		.size           = 0x00020000,           /* 128 KiB */
++		.mask_flags     = MTD_WRITEABLE,
++	},
++	{
++		.name           = "root",
++		.offset         = 0x00020000,
++		.size           = 0x007d0000,
++	},
++	{
++		.name           = "env",
++		.offset         = 0x007f0000,
++		.size           = 0x00010000,
++		.mask_flags     = MTD_WRITEABLE,
++	},
++};
++
++static struct physmap_flash_data flash_data = {
++	.width		= 2,
++	.nr_parts	= ARRAY_SIZE(flash_parts),
++	.parts		= flash_parts,
++};
++
++static struct resource flash_resource = {
++	.start		= 0x00000000,
++	.end		= 0x007fffff,
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device flash_device = {
++	.name		= "physmap-flash",
++	.id		= 0,
++	.resource	= &flash_resource,
++	.num_resources	= 1,
++	.dev		= {
++		.platform_data = &flash_data,
++	},
++};
++
++/* This needs to be called after the SMC has been initialized */
++static int __init favr32_flash_init(void)
++{
++	int ret;
++
++	smc_set_timing(&flash_config, &flash_timing);
++	ret = smc_set_configuration(0, &flash_config);
++	if (ret < 0) {
++		printk(KERN_ERR "Favr-32: failed to set NOR flash timing\n");
++		return ret;
++	}
++
++	platform_device_register(&flash_device);
++
++	return 0;
++}
++device_initcall(favr32_flash_init);
+diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
+new file mode 100644
+index 0000000..1a12930
+--- /dev/null
++++ b/arch/avr32/boards/favr-32/setup.c
+@@ -0,0 +1,334 @@
++/*
++ * Favr-32 board-specific setup code.
++ *
++ * Copyright (C) 2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/etherdevice.h>
++#include <linux/bootmem.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/types.h>
++#include <linux/linkage.h>
++#include <linux/gpio.h>
++#include <linux/leds.h>
++#include <linux/atmel-pwm-bl.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/ads7846.h>
++
++#include <video/atmel_lcdc.h>
++
++#include <asm/setup.h>
++
++#include <mach/at32ap700x.h>
++#include <mach/init.h>
++#include <mach/board.h>
++#include <mach/portmux.h>
++
++/* Oscillator frequencies. These are board-specific */
++unsigned long at32_board_osc_rates[3] = {
++	[0] = 32768,	/* 32.768 kHz on RTC osc */
++	[1] = 20000000,	/* 20 MHz on osc0 */
++	[2] = 12000000,	/* 12 MHz on osc1 */
++};
++
++/* Initialized by bootloader-specific startup code. */
++struct tag *bootloader_tags __initdata;
++
++struct eth_addr {
++	u8 addr[6];
++};
++static struct eth_addr __initdata hw_addr[1];
++static struct eth_platform_data __initdata eth_data[1] = {
++	{
++		.phy_mask	= ~(1U << 1),
++	},
++};
++
++static int ads7843_get_pendown_state(void)
++{
++	return !gpio_get_value(GPIO_PIN_PB(3));
++}
++
++static struct ads7846_platform_data ads7843_data = {
++	.model			= 7843,
++	.get_pendown_state	= ads7843_get_pendown_state,
++	.pressure_max		= 255,
++	/*
++	 * Values below are for debounce filtering, these can be experimented
++	 * with further.
++	 */
++	.debounce_max		= 20,
++	.debounce_rep		= 4,
++	.debounce_tol		= 5,
++};
++
++static struct spi_board_info __initdata spi1_board_info[] = {
++	{
++		/* ADS7843 touch controller */
++		.modalias	= "ads7846",
++		.max_speed_hz	= 2000000,
++		.chip_select	= 0,
++		.bus_num	= 1,
++		.platform_data	= &ads7843_data,
++	},
++};
++
++static struct fb_videomode __initdata lb104v03_modes[] = {
++	{
++		.name		= "640x480 @ 50",
++		.refresh	= 50,
++		.xres		= 640,		.yres		= 480,
++		.pixclock	= KHZ2PICOS(25100),
++
++		.left_margin	= 90,		.right_margin	= 70,
++		.upper_margin	= 30,		.lower_margin	= 15,
++		.hsync_len	= 12,		.vsync_len	= 2,
++
++		.sync		= 0,
++		.vmode		= FB_VMODE_NONINTERLACED,
++	},
++};
++
++static struct fb_monspecs __initdata favr32_default_monspecs = {
++	.manufacturer		= "LG",
++	.monitor		= "LB104V03",
++	.modedb			= lb104v03_modes,
++	.modedb_len		= ARRAY_SIZE(lb104v03_modes),
++	.hfmin			= 27273,
++	.hfmax			= 31111,
++	.vfmin			= 45,
++	.vfmax			= 60,
++	.dclkmax		= 28000000,
++};
++
++struct atmel_lcdfb_info __initdata favr32_lcdc_data = {
++	.default_bpp		= 16,
++	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
++	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
++				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
++				   | ATMEL_LCDC_MEMOR_BIG),
++	.default_monspecs	= &favr32_default_monspecs,
++	.guard_time		= 2,
++};
++
++static struct gpio_led favr32_leds[] = {
++	{
++		.name		 = "green",
++		.gpio		 = GPIO_PIN_PE(19),
++		.default_trigger = "heartbeat",
++		.active_low	 = 1,
++	},
++	{
++		.name		 = "red",
++		.gpio		 = GPIO_PIN_PE(20),
++		.active_low	 = 1,
++	},
++};
++
++static struct gpio_led_platform_data favr32_led_data = {
++	.num_leds	= ARRAY_SIZE(favr32_leds),
++	.leds		= favr32_leds,
++};
++
++static struct platform_device favr32_led_dev = {
++	.name		= "leds-gpio",
++	.id		= 0,
++	.dev		= {
++		.platform_data	= &favr32_led_data,
++	},
++};
++
++/*
++ * The next two functions should go away as the boot loader is
++ * supposed to initialize the macb address registers with a valid
++ * ethernet address. But we need to keep it around for a while until
++ * we can be reasonably sure the boot loader does this.
++ *
++ * The phy_id is ignored as the driver will probe for it.
++ */
++static int __init parse_tag_ethernet(struct tag *tag)
++{
++	int i;
++
++	i = tag->u.ethernet.mac_index;
++	if (i < ARRAY_SIZE(hw_addr))
++		memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
++		       sizeof(hw_addr[i].addr));
++
++	return 0;
++}
++__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
++
++static void __init set_hw_addr(struct platform_device *pdev)
++{
++	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	const u8 *addr;
++	void __iomem *regs;
++	struct clk *pclk;
++
++	if (!res)
++		return;
++	if (pdev->id >= ARRAY_SIZE(hw_addr))
++		return;
++
++	addr = hw_addr[pdev->id].addr;
++	if (!is_valid_ether_addr(addr))
++		return;
++
++	/*
++	 * Since this is board-specific code, we'll cheat and use the
++	 * physical address directly as we happen to know that it's
++	 * the same as the virtual address.
++	 */
++	regs = (void __iomem __force *)res->start;
++	pclk = clk_get(&pdev->dev, "pclk");
++	if (!pclk)
++		return;
++
++	clk_enable(pclk);
++	__raw_writel((addr[3] << 24) | (addr[2] << 16)
++		     | (addr[1] << 8) | addr[0], regs + 0x98);
++	__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
++	clk_disable(pclk);
++	clk_put(pclk);
++}
++
++void __init favr32_setup_leds(void)
++{
++	unsigned i;
++
++	for (i = 0; i < ARRAY_SIZE(favr32_leds); i++)
++		at32_select_gpio(favr32_leds[i].gpio, AT32_GPIOF_OUTPUT);
++
++	platform_device_register(&favr32_led_dev);
++}
++
++static struct atmel_pwm_bl_platform_data atmel_pwm_bl_pdata = {
++	.pwm_channel		= 2,
++	.pwm_frequency		= 200000,
++	.pwm_compare_max	= 345,
++	.pwm_duty_max		= 345,
++	.pwm_duty_min		= 90,
++	.pwm_active_low		= 1,
++	.gpio_on		= GPIO_PIN_PA(28),
++	.on_active_low		= 0,
++};
++
++static struct platform_device atmel_pwm_bl_dev = {
++	.name		= "atmel-pwm-bl",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &atmel_pwm_bl_pdata,
++	},
++};
++
++static void __init favr32_setup_atmel_pwm_bl(void)
++{
++	platform_device_register(&atmel_pwm_bl_dev);
++	at32_select_gpio(atmel_pwm_bl_pdata.gpio_on, 0);
++}
++
++void __init setup_board(void)
++{
++	at32_map_usart(3, 0);	/* USART 3 => /dev/ttyS0 */
++	at32_setup_serial_console(0);
++}
++
++static int __init set_abdac_rate(struct platform_device *pdev)
++{
++	int retval;
++	struct clk *osc1;
++	struct clk *pll1;
++	struct clk *abdac;
++
++	if (pdev == NULL)
++		return -ENXIO;
++
++	osc1 = clk_get(NULL, "osc1");
++	if (IS_ERR(osc1)) {
++		retval = PTR_ERR(osc1);
++		goto out;
++	}
++
++	pll1 = clk_get(NULL, "pll1");
++	if (IS_ERR(pll1)) {
++		retval = PTR_ERR(pll1);
++		goto out_osc1;
++	}
++
++	abdac = clk_get(&pdev->dev, "sample_clk");
++	if (IS_ERR(abdac)) {
++		retval = PTR_ERR(abdac);
++		goto out_pll1;
++	}
++
++	retval = clk_set_parent(pll1, osc1);
++	if (retval != 0)
++		goto out_abdac;
++
++	/*
++	 * Rate is 32000 to 50000 and ABDAC oversamples 256x. Multiply, in
++	 * power of 2, to a value above 80 MHz. Power of 2 so it is possible
++	 * for the generic clock to divide it down again and 80 MHz is the
++	 * lowest frequency for the PLL.
++	 */
++	retval = clk_round_rate(pll1,
++			CONFIG_BOARD_FAVR32_ABDAC_RATE * 256 * 16);
++	if (retval < 0)
++		goto out_abdac;
++
++	retval = clk_set_rate(pll1, retval);
++	if (retval != 0)
++		goto out_abdac;
++
++	retval = clk_set_parent(abdac, pll1);
++	if (retval != 0)
++		goto out_abdac;
++
++out_abdac:
++	clk_put(abdac);
++out_pll1:
++	clk_put(pll1);
++out_osc1:
++	clk_put(osc1);
++out:
++	return retval;
++}
++
++static int __init favr32_init(void)
++{
++	/*
++	 * Favr-32 uses 32-bit SDRAM interface. Reserve the SDRAM-specific
++	 * pins so that nobody messes with them.
++	 */
++	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
++
++	at32_select_gpio(GPIO_PIN_PB(3), 0);	/* IRQ from ADS7843 */
++
++	at32_add_device_usart(0);
++
++	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
++
++	spi1_board_info[0].irq = gpio_to_irq(GPIO_PIN_PB(3));
++
++	set_abdac_rate(at32_add_device_abdac(0));
++
++	at32_add_device_pwm(1 << atmel_pwm_bl_pdata.pwm_channel);
++	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
++	at32_add_device_mci(0, NULL);
++	at32_add_device_usba(0, NULL);
++	at32_add_device_lcdc(0, &favr32_lcdc_data, fbmem_start, fbmem_size, 0);
++
++	favr32_setup_leds();
++
++	favr32_setup_atmel_pwm_bl();
++
++	return 0;
++}
++postcore_initcall(favr32_init);
+diff --git a/arch/avr32/boards/mimc200/Makefile b/arch/avr32/boards/mimc200/Makefile
+new file mode 100644
+index 0000000..79c076e
+--- /dev/null
++++ b/arch/avr32/boards/mimc200/Makefile
+@@ -0,0 +1 @@
++obj-y				+= setup.o flash.o fram.o
+diff --git a/arch/avr32/boards/mimc200/flash.c b/arch/avr32/boards/mimc200/flash.c
+new file mode 100644
+index 0000000..d83d650
+--- /dev/null
++++ b/arch/avr32/boards/mimc200/flash.c
+@@ -0,0 +1,143 @@
++/*
++ * MIMC200 board-specific flash initialization
++ *
++ * Copyright (C) 2008 Mercury IMC Ltd
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++
++#include <mach/smc.h>
++
++static struct smc_timing flash_timing __initdata = {
++	.ncs_read_setup		= 0,
++	.nrd_setup		= 15,
++	.ncs_write_setup	= 0,
++	.nwe_setup		= 0,
++
++	.ncs_read_pulse		= 115,
++	.nrd_pulse		= 110,
++	.ncs_write_pulse	= 60,
++	.nwe_pulse		= 60,
++
++	.read_cycle		= 115,
++	.write_cycle		= 100,
++};
++
++static struct smc_config flash_config __initdata = {
++	.bus_width		= 2,
++	.nrd_controlled		= 1,
++	.nwe_controlled		= 1,
++	.byte_write		= 1,
++};
++
++/* system flash definition */
++
++static struct mtd_partition flash_parts_system[] = {
++	{
++		.name           = "u-boot",
++		.offset         = 0x00000000,
++		.size           = 0x00020000,           /* 128 KiB */
++		.mask_flags     = MTD_WRITEABLE,
++	},
++	{
++		.name           = "root",
++		.offset         = 0x00020000,
++		.size           = 0x007c0000,
++	},
++	{
++		.name		= "splash",
++		.offset		= 0x007e0000,
++		.size		= 0x00010000,		/* 64KiB */
++	},
++	{
++		.name           = "env",
++		.offset         = 0x007f0000,
++		.size           = 0x00010000,
++		.mask_flags     = MTD_WRITEABLE,
++	},
++};
++
++static struct physmap_flash_data flash_system = {
++	.width		= 2,
++	.nr_parts	= ARRAY_SIZE(flash_parts_system),
++	.parts		= flash_parts_system,
++};
++
++static struct resource flash_resource_system = {
++	.start		= 0x00000000,
++	.end		= 0x007fffff,
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device flash_device_system = {
++	.name		= "physmap-flash",
++	.id		= 0,
++	.resource	= &flash_resource_system,
++	.num_resources	= 1,
++	.dev		= {
++		.platform_data = &flash_system,
++	},
++};
++
++/* data flash definition */
++
++static struct mtd_partition flash_parts_data[] = {
++	{
++		.name		= "data",
++		.offset		= 0x00000000,
++		.size		= 0x00800000,
++	},
++};
++
++static struct physmap_flash_data flash_data = {
++	.width		= 2,
++	.nr_parts	= ARRAY_SIZE(flash_parts_data),
++	.parts		= flash_parts_data,
++};
++
++static struct resource flash_resource_data = {
++	.start		= 0x08000000,
++	.end		= 0x087fffff,
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device flash_device_data = {
++	.name		= "physmap-flash",
++	.id		= 1,
++	.resource	= &flash_resource_data,
++	.num_resources	= 1,
++	.dev		= {
++		.platform_data = &flash_data,
++	},
++};
++
++/* This needs to be called after the SMC has been initialized */
++static int __init mimc200_flash_init(void)
++{
++	int ret;
++
++	smc_set_timing(&flash_config, &flash_timing);
++	ret = smc_set_configuration(0, &flash_config);
++	if (ret < 0) {
++		printk(KERN_ERR "mimc200: failed to set 'System' NOR flash timing\n");
++		return ret;
++	}
++	ret = smc_set_configuration(1, &flash_config);
++	if (ret < 0) {
++		printk(KERN_ERR "mimc200: failed to set 'Data' NOR flash timing\n");
++		return ret;
++	}
++
++	platform_device_register(&flash_device_system);
++	platform_device_register(&flash_device_data);
++
++	return 0;
++}
++device_initcall(mimc200_flash_init);
+diff --git a/arch/avr32/boards/mimc200/fram.c b/arch/avr32/boards/mimc200/fram.c
+new file mode 100644
+index 0000000..54fbd95
+--- /dev/null
++++ b/arch/avr32/boards/mimc200/fram.c
+@@ -0,0 +1,80 @@
++/*
++ * FRAM driver for MIMC200 board
++ *
++ * Copyright 2008 Mark Jackson <mpfj@mimc.co.uk>
++ *
++ * This module adds *very* simply support for the system's FRAM device.
++ * At the moment, this is hard-coded to the MIMC200 platform, and only
++ * supports mmap().
++ */
++
++#define FRAM_VERSION	"1.0"
++
++#include <linux/miscdevice.h>
++#include <linux/proc_fs.h>
++#include <linux/mm.h>
++#include <linux/io.h>
++
++#define FRAM_BASE	0xac000000
++#define FRAM_SIZE	0x20000
++
++/*
++ * The are the file operation function for user access to /dev/fram
++ */
++
++static int fram_mmap(struct file *filp, struct vm_area_struct *vma)
++{
++	int ret;
++
++	ret = remap_pfn_range(vma,
++		vma->vm_start,
++		virt_to_phys((void *)((unsigned long)FRAM_BASE)) >> PAGE_SHIFT,
++		vma->vm_end-vma->vm_start,
++		PAGE_SHARED);
++
++	if (ret != 0)
++		return -EAGAIN;
++
++	return 0;
++}
++
++static const struct file_operations fram_fops = {
++	.owner			= THIS_MODULE,
++	.mmap			= fram_mmap,
++};
++
++#define FRAM_MINOR	0
++
++static struct miscdevice fram_dev = {
++	FRAM_MINOR,
++	"fram",
++	&fram_fops
++};
++
++static int __init
++fram_init(void)
++{
++	int ret;
++
++	ret = misc_register(&fram_dev);
++	if (ret) {
++		printk(KERN_ERR "fram: can't misc_register on minor=%d\n",
++		    FRAM_MINOR);
++		return ret;
++	}
++	printk(KERN_INFO "FRAM memory driver v" FRAM_VERSION "\n");
++	return 0;
++}
++
++static void __exit
++fram_cleanup_module(void)
++{
++	misc_deregister(&fram_dev);
++}
++
++module_init(fram_init);
++module_exit(fram_cleanup_module);
++
++MODULE_LICENSE("GPL");
++
++MODULE_ALIAS_MISCDEV(FRAM_MINOR);
+diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c
+new file mode 100644
+index 0000000..c060d4d
+--- /dev/null
++++ b/arch/avr32/boards/mimc200/setup.c
+@@ -0,0 +1,235 @@
++/*
++ * Board-specific setup code for the MIMC200
++ *
++ * Copyright (C) 2008 Mercury IMC Ltd
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++extern struct atmel_lcdfb_info mimc200_lcdc_data;
++
++#include <linux/clk.h>
++#include <linux/etherdevice.h>
++#include <linux/i2c-gpio.h>
++#include <linux/init.h>
++#include <linux/linkage.h>
++#include <linux/platform_device.h>
++#include <linux/types.h>
++#include <linux/leds.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/eeprom.h>
++
++#include <video/atmel_lcdc.h>
++#include <linux/fb.h>
++
++#include <asm/atmel-mci.h>
++#include <linux/io.h>
++#include <asm/setup.h>
++
++#include <mach/at32ap700x.h>
++#include <mach/board.h>
++#include <mach/init.h>
++#include <mach/portmux.h>
++
++/* Oscillator frequencies. These are board-specific */
++unsigned long at32_board_osc_rates[3] = {
++	[0] = 32768,	/* 32.768 kHz on RTC osc */
++	[1] = 10000000,	/* 10 MHz on osc0 */
++	[2] = 12000000,	/* 12 MHz on osc1 */
++};
++
++/* Initialized by bootloader-specific startup code. */
++struct tag *bootloader_tags __initdata;
++
++static struct fb_videomode __initdata tx14d14_modes[] = {
++	{
++		.name		= "640x480 @ 60",
++		.refresh	= 60,
++		.xres		= 640,		.yres		= 480,
++		.pixclock	= KHZ2PICOS(11666),
++
++		.left_margin	= 80,		.right_margin	= 1,
++		.upper_margin	= 13,		.lower_margin	= 2,
++		.hsync_len	= 64,		.vsync_len	= 1,
++
++		.sync		= 0,
++		.vmode		= FB_VMODE_NONINTERLACED,
++	},
++};
++
++static struct fb_monspecs __initdata mimc200_default_monspecs = {
++	.manufacturer		= "HIT",
++	.monitor		= "TX14D14VM1BAB",
++	.modedb			= tx14d14_modes,
++	.modedb_len		= ARRAY_SIZE(tx14d14_modes),
++	.hfmin			= 14820,
++	.hfmax			= 22230,
++	.vfmin			= 60,
++	.vfmax			= 73.3,
++	.dclkmax		= 25200000,
++};
++
++struct atmel_lcdfb_info __initdata mimc200_lcdc_data = {
++	.default_bpp		= 16,
++	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
++	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
++				   | ATMEL_LCDC_INVCLK
++				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
++				   | ATMEL_LCDC_MEMOR_BIG),
++	.default_monspecs	= &mimc200_default_monspecs,
++	.guard_time		= 2,
++};
++
++struct eth_addr {
++	u8 addr[6];
++};
++static struct eth_addr __initdata hw_addr[2];
++static struct eth_platform_data __initdata eth_data[2];
++
++static struct spi_eeprom eeprom_25lc010 = {
++		.name = "25lc010",
++		.byte_len = 128,
++		.page_size = 16,
++		.flags = EE_ADDR1,
++};
++
++static struct spi_board_info spi0_board_info[] __initdata = {
++	{
++		.modalias	= "rtc-ds1390",
++		.max_speed_hz	= 4000000,
++		.chip_select	= 2,
++	},
++	{
++		.modalias	= "at25",
++		.max_speed_hz	= 1000000,
++		.chip_select	= 1,
++		.mode		= SPI_MODE_3,
++		.platform_data	= &eeprom_25lc010,
++	},
++};
++
++static struct mci_platform_data __initdata mci0_data = {
++	.slot[0] = {
++		.bus_width	= 4,
++		.detect_pin	= GPIO_PIN_PA(26),
++		.wp_pin		= GPIO_PIN_PA(27),
++	},
++};
++
++/*
++ * The next two functions should go away as the boot loader is
++ * supposed to initialize the macb address registers with a valid
++ * ethernet address. But we need to keep it around for a while until
++ * we can be reasonably sure the boot loader does this.
++ *
++ * The phy_id is ignored as the driver will probe for it.
++ */
++static int __init parse_tag_ethernet(struct tag *tag)
++{
++	int i;
++
++	i = tag->u.ethernet.mac_index;
++	if (i < ARRAY_SIZE(hw_addr))
++		memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
++		       sizeof(hw_addr[i].addr));
++
++	return 0;
++}
++__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
++
++static void __init set_hw_addr(struct platform_device *pdev)
++{
++	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	const u8 *addr;
++	void __iomem *regs;
++	struct clk *pclk;
++
++	if (!res)
++		return;
++	if (pdev->id >= ARRAY_SIZE(hw_addr))
++		return;
++
++	addr = hw_addr[pdev->id].addr;
++	if (!is_valid_ether_addr(addr))
++		return;
++
++	/*
++	 * Since this is board-specific code, we'll cheat and use the
++	 * physical address directly as we happen to know that it's
++	 * the same as the virtual address.
++	 */
++	regs = (void __iomem __force *)res->start;
++	pclk = clk_get(&pdev->dev, "pclk");
++	if (!pclk)
++		return;
++
++	clk_enable(pclk);
++	__raw_writel((addr[3] << 24) | (addr[2] << 16)
++		     | (addr[1] << 8) | addr[0], regs + 0x98);
++	__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
++	clk_disable(pclk);
++	clk_put(pclk);
++}
++
++void __init setup_board(void)
++{
++	at32_map_usart(0, 0);	/* USART 0: /dev/ttyS0 (TTL --> Altera) */
++	at32_map_usart(1, 1);	/* USART 1: /dev/ttyS1 (RS232) */
++	at32_map_usart(2, 2);	/* USART 2: /dev/ttyS2 (RS485) */
++	at32_map_usart(3, 3);	/* USART 3: /dev/ttyS3 (RS422 Multidrop) */
++}
++
++static struct i2c_gpio_platform_data i2c_gpio_data = {
++	.sda_pin		= GPIO_PIN_PA(6),
++	.scl_pin		= GPIO_PIN_PA(7),
++	.sda_is_open_drain	= 1,
++	.scl_is_open_drain	= 1,
++	.udelay			= 2,	/* close to 100 kHz */
++};
++
++static struct platform_device i2c_gpio_device = {
++	.name		= "i2c-gpio",
++	.id		= 0,
++	.dev		= {
++	.platform_data	= &i2c_gpio_data,
++	},
++};
++
++static struct i2c_board_info __initdata i2c_info[] = {
++};
++
++static int __init mimc200_init(void)
++{
++	/*
++	 * MIMC200 uses 16-bit SDRAM interface, so we don't need to
++	 * reserve any pins for it.
++	 */
++
++	at32_add_device_usart(0);
++	at32_add_device_usart(1);
++	at32_add_device_usart(2);
++	at32_add_device_usart(3);
++
++	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
++	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
++
++	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++	at32_add_device_mci(0, &mci0_data);
++	at32_add_device_usba(0, NULL);
++
++	at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP);
++	at32_select_gpio(i2c_gpio_data.sda_pin,
++		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
++	at32_select_gpio(i2c_gpio_data.scl_pin,
++		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
++	platform_device_register(&i2c_gpio_device);
++	i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
++
++	at32_add_device_lcdc(0, &mimc200_lcdc_data,
++			     fbmem_start, fbmem_size, 1);
++
++	return 0;
++}
++postcore_initcall(mimc200_init);
+diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
+index 5415209..58fe9f3 100644
+--- a/arch/avr32/configs/atngw100_defconfig
++++ b/arch/avr32/configs/atngw100_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.27-rc1
+-# Tue Aug  5 16:00:47 2008
++# Linux kernel version: 2.6.27.4
++# Thu Nov 13 14:33:33 2008
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+@@ -130,11 +130,15 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PORTMUX_PIO=y
+ CONFIG_PLATFORM_AT32AP=y
+ CONFIG_CPU_AT32AP700X=y
+ CONFIG_CPU_AT32AP7000=y
+ # CONFIG_BOARD_ATSTK1000 is not set
+ CONFIG_BOARD_ATNGW100=y
++# CONFIG_BOARD_FAVR_32 is not set
++# CONFIG_BOARD_MIMC200 is not set
++# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
+ CONFIG_LOADER_U_BOOT=y
+ 
+ #
+@@ -177,7 +181,7 @@ CONFIG_HZ_250=y
+ # CONFIG_HZ_300 is not set
+ # CONFIG_HZ_1000 is not set
+ CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
++CONFIG_SCHED_HRTICK=y
+ CONFIG_CMDLINE=""
+ 
+ #
+@@ -615,6 +619,7 @@ CONFIG_UNIX98_PTYS=y
+ CONFIG_I2C=m
+ CONFIG_I2C_BOARDINFO=y
+ CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_HELPER_AUTO=y
+ CONFIG_I2C_ALGOBIT=m
+ 
+ #
+@@ -664,6 +669,7 @@ CONFIG_SPI_MASTER=y
+ #
+ # SPI Master Controller Drivers
+ #
++CONFIG_SPI_ATMEL_HAVE_PDC=y
+ CONFIG_SPI_ATMEL=y
+ # CONFIG_SPI_BITBANG is not set
+ 
+@@ -706,7 +712,7 @@ CONFIG_WATCHDOG=y
+ # Watchdog Device Drivers
+ #
+ # CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_AT32AP700X_WDT=y
++CONFIG_AT32_WDT=y
+ 
+ #
+ # Sonics Silicon Backplane
+@@ -720,6 +726,7 @@ CONFIG_SSB_POSSIBLE=y
+ # CONFIG_MFD_CORE is not set
+ # CONFIG_MFD_SM501 is not set
+ # CONFIG_HTC_PASIC3 is not set
++# CONFIG_MFD_TMIO is not set
+ 
+ #
+ # Multimedia devices
+@@ -751,11 +758,14 @@ CONFIG_SSB_POSSIBLE=y
+ # CONFIG_DISPLAY_SUPPORT is not set
+ # CONFIG_SOUND is not set
+ CONFIG_USB_SUPPORT=y
+-# CONFIG_USB_ARCH_HAS_HCD is not set
+-# CONFIG_USB_ARCH_HAS_OHCI is not set
+-# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
+ # CONFIG_USB_OTG_WHITELIST is not set
+ # CONFIG_USB_OTG_BLACKLIST_HUB is not set
++# CONFIG_USB_MUSB_HDRC is not set
++# CONFIG_USB_GADGET_MUSB_HDRC is not set
+ 
+ #
+ # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+@@ -806,6 +816,7 @@ CONFIG_MMC_TEST=m
+ #
+ # CONFIG_MMC_SDHCI is not set
+ CONFIG_MMC_ATMELMCI=y
++# CONFIG_MMC_ATMELMCI_DMA is not set
+ CONFIG_MMC_SPI=m
+ # CONFIG_MEMSTICK is not set
+ CONFIG_NEW_LEDS=y
+@@ -880,11 +891,13 @@ CONFIG_RTC_INTF_DEV=y
+ # on-CPU RTC drivers
+ #
+ CONFIG_RTC_DRV_AT32AP700X=y
++# CONFIG_RTC_DRV_AVR32_AST is not set
+ CONFIG_DMADEVICES=y
+ 
+ #
+ # DMA Devices
+ #
++# CONFIG_ATMEL_PDCA is not set
+ CONFIG_DW_DMAC=y
+ CONFIG_DMA_ENGINE=y
+ 
+@@ -898,13 +911,13 @@ CONFIG_DMATEST=m
+ #
+ # File systems
+ #
+-CONFIG_EXT2_FS=m
++CONFIG_EXT2_FS=y
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=m
++CONFIG_EXT3_FS=y
+ # CONFIG_EXT3_FS_XATTR is not set
+ # CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=m
++CONFIG_JBD=y
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+@@ -944,7 +957,7 @@ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-CONFIG_CONFIGFS_FS=m
++CONFIG_CONFIGFS_FS=y
+ 
+ #
+ # Miscellaneous filesystems
+diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig
+new file mode 100644
+index 0000000..24f57fa
+--- /dev/null
++++ b/arch/avr32/configs/atngw100_evklcd100_defconfig
+@@ -0,0 +1,1323 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.27.4
++# Thu Nov 13 14:10:50 2008
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++# CONFIG_GROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_COMPAT_BRK is not set
++# CONFIG_BASE_FULL is not set
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++CONFIG_PROFILING=y
++# CONFIG_MARKERS is not set
++CONFIG_OPROFILE=m
++CONFIG_HAVE_OPROFILE=y
++CONFIG_KPROBES=y
++# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
++# CONFIG_HAVE_IOREMAP_PROT is not set
++CONFIG_HAVE_KPROBES=y
++# CONFIG_HAVE_KRETPROBES is not set
++# CONFIG_HAVE_ARCH_TRACEHOOK is not set
++# CONFIG_HAVE_DMA_ATTRS is not set
++# CONFIG_USE_GENERIC_SMP_HELPERS is not set
++CONFIG_HAVE_CLK=y
++CONFIG_PROC_PAGE_MONITOR=y
++# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_AS is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++CONFIG_CLASSIC_RCU=y
++
++#
++# System Type and features
++#
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PORTMUX_PIO=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
++CONFIG_CPU_AT32AP7000=y
++# CONFIG_BOARD_ATSTK1000 is not set
++CONFIG_BOARD_ATNGW100=y
++# CONFIG_BOARD_FAVR_32 is not set
++# CONFIG_BOARD_MIMC200 is not set
++CONFIG_BOARD_ATNGW100_EVKLCD10X=y
++CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA=y
++# CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA is not set
++# CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA is not set
++CONFIG_LOADER_U_BOOT=y
++
++#
++# Atmel AVR32 AP options
++#
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_QUICKLIST=y
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_NR_QUICK=2
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_NMI_DEBUGGING=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_SCHED_HRTICK=y
++CONFIG_CMDLINE=""
++
++#
++# Power management options
++#
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=y
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_XFRM_IPCOMP=y
++CONFIG_NET_KEY=y
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_ASK_IP_FIB_HASH=y
++# CONFIG_IP_FIB_TRIE is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_MULTIPLE_TABLES is not set
++# CONFIG_IP_ROUTE_MULTIPATH is not set
++# CONFIG_IP_ROUTE_VERBOSE is not set
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++CONFIG_IP_MROUTE=y
++CONFIG_IP_PIMSM_V1=y
++# CONFIG_IP_PIMSM_V2 is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++CONFIG_INET_AH=y
++CONFIG_INET_ESP=y
++CONFIG_INET_IPCOMP=y
++CONFIG_INET_XFRM_TUNNEL=y
++CONFIG_INET_TUNNEL=y
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IP_VS is not set
++CONFIG_IPV6=y
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=y
++CONFIG_INET6_ESP=y
++CONFIG_INET6_IPCOMP=y
++# CONFIG_IPV6_MIP6 is not set
++CONFIG_INET6_XFRM_TUNNEL=y
++CONFIG_INET6_TUNNEL=y
++CONFIG_INET6_XFRM_MODE_TRANSPORT=y
++CONFIG_INET6_XFRM_MODE_TUNNEL=y
++CONFIG_INET6_XFRM_MODE_BEET=y
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=y
++CONFIG_IPV6_NDISC_NODETYPE=y
++# CONFIG_IPV6_TUNNEL is not set
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
++# CONFIG_IPV6_MROUTE is not set
++# CONFIG_NETWORK_SECMARK is not set
++CONFIG_NETFILTER=y
++# CONFIG_NETFILTER_DEBUG is not set
++# CONFIG_NETFILTER_ADVANCED is not set
++
++#
++# Core Netfilter Configuration
++#
++CONFIG_NETFILTER_NETLINK=m
++CONFIG_NETFILTER_NETLINK_LOG=m
++CONFIG_NF_CONNTRACK=m
++CONFIG_NF_CONNTRACK_FTP=m
++CONFIG_NF_CONNTRACK_IRC=m
++CONFIG_NF_CONNTRACK_SIP=m
++CONFIG_NF_CT_NETLINK=m
++CONFIG_NETFILTER_XTABLES=y
++CONFIG_NETFILTER_XT_TARGET_MARK=m
++CONFIG_NETFILTER_XT_TARGET_NFLOG=m
++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
++CONFIG_NETFILTER_XT_MATCH_MARK=m
++CONFIG_NETFILTER_XT_MATCH_POLICY=m
++CONFIG_NETFILTER_XT_MATCH_STATE=m
++
++#
++# IP: Netfilter Configuration
++#
++CONFIG_NF_CONNTRACK_IPV4=m
++CONFIG_NF_CONNTRACK_PROC_COMPAT=y
++CONFIG_IP_NF_IPTABLES=m
++CONFIG_IP_NF_FILTER=m
++CONFIG_IP_NF_TARGET_REJECT=m
++CONFIG_IP_NF_TARGET_LOG=m
++# CONFIG_IP_NF_TARGET_ULOG is not set
++CONFIG_NF_NAT=m
++CONFIG_NF_NAT_NEEDED=y
++CONFIG_IP_NF_TARGET_MASQUERADE=m
++CONFIG_NF_NAT_FTP=m
++CONFIG_NF_NAT_IRC=m
++# CONFIG_NF_NAT_TFTP is not set
++# CONFIG_NF_NAT_AMANDA is not set
++# CONFIG_NF_NAT_PPTP is not set
++# CONFIG_NF_NAT_H323 is not set
++CONFIG_NF_NAT_SIP=m
++CONFIG_IP_NF_MANGLE=m
++
++#
++# IPv6: Netfilter Configuration
++#
++CONFIG_NF_CONNTRACK_IPV6=m
++CONFIG_IP6_NF_IPTABLES=m
++CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_TARGET_LOG=m
++CONFIG_IP6_NF_TARGET_REJECT=m
++CONFIG_IP6_NF_MANGLE=m
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++CONFIG_STP=m
++CONFIG_BRIDGE=m
++CONFIG_VLAN_8021Q=m
++# CONFIG_VLAN_8021Q_GVRP is not set
++# CONFIG_DECNET is not set
++CONFIG_LLC=m
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_TCPPROBE is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x80000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=y
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++
++#
++# UBI debugging options
++#
++# CONFIG_MTD_UBI_DEBUG is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=m
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_ATMEL_PWM is not set
++CONFIG_ATMEL_TCLIB=y
++CONFIG_ATMEL_TCB_CLKSRC=y
++CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_ATMEL_SSC is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++# CONFIG_HAVE_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++CONFIG_MACB=y
++# CONFIG_ENC28J60 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_IWLWIFI_LEDS is not set
++# CONFIG_WAN is not set
++CONFIG_PPP=m
++# CONFIG_PPP_MULTILINK is not set
++CONFIG_PPP_FILTER=y
++CONFIG_PPP_ASYNC=m
++# CONFIG_PPP_SYNC_TTY is not set
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++CONFIG_PPP_MPPE=m
++CONFIG_PPPOE=m
++# CONFIG_PPPOL2TP is not set
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++# CONFIG_TOUCHSCREEN_ADS7846 is not set
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_INEXIO is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++# CONFIG_TOUCHSCREEN_UCB1400 is not set
++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_DEVKMEM=y
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_HELPER_AUTO=y
++CONFIG_I2C_ALGOBIT=m
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_SIMTEC is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_AT24 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL_HAVE_PDC=y
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++# CONFIG_DEBUG_GPIO is not set
++# CONFIG_GPIO_SYSFS is not set
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_GPIO_PCF857X is not set
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++# CONFIG_THERMAL_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_MFD_TMIO is not set
++
++#
++# Multimedia devices
++#
++
++#
++# Multimedia core support
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_VIDEO_MEDIA is not set
++
++#
++# Multimedia drivers
++#
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_ATMEL_MPOP is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
++# CONFIG_LOGO is not set
++CONFIG_SOUND=y
++CONFIG_SND=y
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++# CONFIG_SND_SUPPORT_OLD_API is not set
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++CONFIG_SND_DRIVERS=y
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++CONFIG_SND_SPI=y
++# CONFIG_SND_SOC is not set
++# CONFIG_SOUND_PRIME is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++# CONFIG_USB_OTG_WHITELIST is not set
++# CONFIG_USB_OTG_BLACKLIST_HUB is not set
++# CONFIG_USB_MUSB_HDRC is not set
++# CONFIG_USB_GADGET_MUSB_HDRC is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA25X is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_PXA27X is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_USB_G_PRINTER is not set
++# CONFIG_USB_CDC_COMPOSITE is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++CONFIG_MMC_ATMELMCI=y
++# CONFIG_MMC_SPI is not set
++# CONFIG_MEMSTICK is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++# CONFIG_LEDS_PCA9532 is not set
++CONFIG_LEDS_GPIO=y
++# CONFIG_LEDS_PCA955X is not set
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
++# CONFIG_RTC_DRV_AVR32_AST is not set
++# CONFIG_DMADEVICES is not set
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_DNOTIFY is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++CONFIG_FUSE_FS=m
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=850
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++# CONFIG_PROC_KCORE is not set
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=y
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_UBIFS_FS=y
++# CONFIG_UBIFS_FS_XATTR is not set
++# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
++CONFIG_UBIFS_FS_LZO=y
++CONFIG_UBIFS_FS_ZLIB=y
++# CONFIG_UBIFS_FS_DEBUG is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++CONFIG_ROOT_NFS=y
++CONFIG_NFSD=m
++CONFIG_NFSD_V3=y
++# CONFIG_NFSD_V3_ACL is not set
++# CONFIG_NFSD_V4 is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_EXPORTFS=m
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++CONFIG_SMB_FS=m
++# CONFIG_SMB_NLS_DEFAULT is not set
++CONFIG_CIFS=m
++# CONFIG_CIFS_STATS is not set
++# CONFIG_CIFS_WEAK_PW_HASH is not set
++# CONFIG_CIFS_XATTR is not set
++# CONFIG_CIFS_DEBUG2 is not set
++# CONFIG_CIFS_EXPERIMENTAL is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=m
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=m
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=m
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=m
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++# CONFIG_DEBUG_MEMORY_INIT is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++CONFIG_FRAME_POINTER=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_KPROBES_SANITY_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_LKDTM is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_AEAD=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_AUTHENC=y
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
++CONFIG_CRYPTO_CBC=y
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++CONFIG_CRYPTO_ECB=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++CONFIG_CRYPTO_HMAC=y
++# CONFIG_CRYPTO_XCBC is not set
++
++#
++# Digest
++#
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
++CONFIG_CRYPTO_SHA1=y
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_WP512 is not set
++
++#
++# Ciphers
++#
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++CONFIG_CRYPTO_ARC4=m
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++
++#
++# Compression
++#
++CONFIG_CRYPTO_DEFLATE=y
++CONFIG_CRYPTO_LZO=y
++CONFIG_CRYPTO_HW=y
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_GENERIC_FIND_FIRST_BIT is not set
++# CONFIG_GENERIC_FIND_NEXT_BIT is not set
++CONFIG_CRC_CCITT=m
++CONFIG_CRC16=y
++# CONFIG_CRC_T10DIF is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_LZO_COMPRESS=y
++CONFIG_LZO_DECOMPRESS=y
++CONFIG_GENERIC_ALLOCATOR=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig
+new file mode 100644
+index 0000000..253b4b9
+--- /dev/null
++++ b/arch/avr32/configs/atngw100_evklcd101_defconfig
+@@ -0,0 +1,1323 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.27.4
++# Thu Nov 13 14:11:19 2008
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++# CONFIG_GROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_COMPAT_BRK is not set
++# CONFIG_BASE_FULL is not set
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++CONFIG_PROFILING=y
++# CONFIG_MARKERS is not set
++CONFIG_OPROFILE=m
++CONFIG_HAVE_OPROFILE=y
++CONFIG_KPROBES=y
++# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
++# CONFIG_HAVE_IOREMAP_PROT is not set
++CONFIG_HAVE_KPROBES=y
++# CONFIG_HAVE_KRETPROBES is not set
++# CONFIG_HAVE_ARCH_TRACEHOOK is not set
++# CONFIG_HAVE_DMA_ATTRS is not set
++# CONFIG_USE_GENERIC_SMP_HELPERS is not set
++CONFIG_HAVE_CLK=y
++CONFIG_PROC_PAGE_MONITOR=y
++# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_AS is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++CONFIG_CLASSIC_RCU=y
++
++#
++# System Type and features
++#
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PORTMUX_PIO=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
++CONFIG_CPU_AT32AP7000=y
++# CONFIG_BOARD_ATSTK1000 is not set
++CONFIG_BOARD_ATNGW100=y
++# CONFIG_BOARD_FAVR_32 is not set
++# CONFIG_BOARD_MIMC200 is not set
++CONFIG_BOARD_ATNGW100_EVKLCD10X=y
++# CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA is not set
++CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA=y
++# CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA is not set
++CONFIG_LOADER_U_BOOT=y
++
++#
++# Atmel AVR32 AP options
++#
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_QUICKLIST=y
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_NR_QUICK=2
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_NMI_DEBUGGING=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_SCHED_HRTICK=y
++CONFIG_CMDLINE=""
++
++#
++# Power management options
++#
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=y
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_XFRM_IPCOMP=y
++CONFIG_NET_KEY=y
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_ASK_IP_FIB_HASH=y
++# CONFIG_IP_FIB_TRIE is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_MULTIPLE_TABLES is not set
++# CONFIG_IP_ROUTE_MULTIPATH is not set
++# CONFIG_IP_ROUTE_VERBOSE is not set
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++CONFIG_IP_MROUTE=y
++CONFIG_IP_PIMSM_V1=y
++# CONFIG_IP_PIMSM_V2 is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++CONFIG_INET_AH=y
++CONFIG_INET_ESP=y
++CONFIG_INET_IPCOMP=y
++CONFIG_INET_XFRM_TUNNEL=y
++CONFIG_INET_TUNNEL=y
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IP_VS is not set
++CONFIG_IPV6=y
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=y
++CONFIG_INET6_ESP=y
++CONFIG_INET6_IPCOMP=y
++# CONFIG_IPV6_MIP6 is not set
++CONFIG_INET6_XFRM_TUNNEL=y
++CONFIG_INET6_TUNNEL=y
++CONFIG_INET6_XFRM_MODE_TRANSPORT=y
++CONFIG_INET6_XFRM_MODE_TUNNEL=y
++CONFIG_INET6_XFRM_MODE_BEET=y
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=y
++CONFIG_IPV6_NDISC_NODETYPE=y
++# CONFIG_IPV6_TUNNEL is not set
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
++# CONFIG_IPV6_MROUTE is not set
++# CONFIG_NETWORK_SECMARK is not set
++CONFIG_NETFILTER=y
++# CONFIG_NETFILTER_DEBUG is not set
++# CONFIG_NETFILTER_ADVANCED is not set
++
++#
++# Core Netfilter Configuration
++#
++CONFIG_NETFILTER_NETLINK=m
++CONFIG_NETFILTER_NETLINK_LOG=m
++CONFIG_NF_CONNTRACK=m
++CONFIG_NF_CONNTRACK_FTP=m
++CONFIG_NF_CONNTRACK_IRC=m
++CONFIG_NF_CONNTRACK_SIP=m
++CONFIG_NF_CT_NETLINK=m
++CONFIG_NETFILTER_XTABLES=y
++CONFIG_NETFILTER_XT_TARGET_MARK=m
++CONFIG_NETFILTER_XT_TARGET_NFLOG=m
++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
++CONFIG_NETFILTER_XT_MATCH_MARK=m
++CONFIG_NETFILTER_XT_MATCH_POLICY=m
++CONFIG_NETFILTER_XT_MATCH_STATE=m
++
++#
++# IP: Netfilter Configuration
++#
++CONFIG_NF_CONNTRACK_IPV4=m
++CONFIG_NF_CONNTRACK_PROC_COMPAT=y
++CONFIG_IP_NF_IPTABLES=m
++CONFIG_IP_NF_FILTER=m
++CONFIG_IP_NF_TARGET_REJECT=m
++CONFIG_IP_NF_TARGET_LOG=m
++# CONFIG_IP_NF_TARGET_ULOG is not set
++CONFIG_NF_NAT=m
++CONFIG_NF_NAT_NEEDED=y
++CONFIG_IP_NF_TARGET_MASQUERADE=m
++CONFIG_NF_NAT_FTP=m
++CONFIG_NF_NAT_IRC=m
++# CONFIG_NF_NAT_TFTP is not set
++# CONFIG_NF_NAT_AMANDA is not set
++# CONFIG_NF_NAT_PPTP is not set
++# CONFIG_NF_NAT_H323 is not set
++CONFIG_NF_NAT_SIP=m
++CONFIG_IP_NF_MANGLE=m
++
++#
++# IPv6: Netfilter Configuration
++#
++CONFIG_NF_CONNTRACK_IPV6=m
++CONFIG_IP6_NF_IPTABLES=m
++CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_TARGET_LOG=m
++CONFIG_IP6_NF_TARGET_REJECT=m
++CONFIG_IP6_NF_MANGLE=m
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++CONFIG_STP=m
++CONFIG_BRIDGE=m
++CONFIG_VLAN_8021Q=m
++# CONFIG_VLAN_8021Q_GVRP is not set
++# CONFIG_DECNET is not set
++CONFIG_LLC=m
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_TCPPROBE is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x80000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=y
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++
++#
++# UBI debugging options
++#
++# CONFIG_MTD_UBI_DEBUG is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=m
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_ATMEL_PWM is not set
++CONFIG_ATMEL_TCLIB=y
++CONFIG_ATMEL_TCB_CLKSRC=y
++CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_ATMEL_SSC is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++# CONFIG_HAVE_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++CONFIG_MACB=y
++# CONFIG_ENC28J60 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_IWLWIFI_LEDS is not set
++# CONFIG_WAN is not set
++CONFIG_PPP=m
++# CONFIG_PPP_MULTILINK is not set
++CONFIG_PPP_FILTER=y
++CONFIG_PPP_ASYNC=m
++# CONFIG_PPP_SYNC_TTY is not set
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++CONFIG_PPP_MPPE=m
++CONFIG_PPPOE=m
++# CONFIG_PPPOL2TP is not set
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++# CONFIG_TOUCHSCREEN_ADS7846 is not set
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_INEXIO is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++# CONFIG_TOUCHSCREEN_UCB1400 is not set
++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_DEVKMEM=y
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_HELPER_AUTO=y
++CONFIG_I2C_ALGOBIT=m
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_SIMTEC is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_AT24 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL_HAVE_PDC=y
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++# CONFIG_DEBUG_GPIO is not set
++# CONFIG_GPIO_SYSFS is not set
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_GPIO_PCF857X is not set
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++# CONFIG_THERMAL_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_MFD_TMIO is not set
++
++#
++# Multimedia devices
++#
++
++#
++# Multimedia core support
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_VIDEO_MEDIA is not set
++
++#
++# Multimedia drivers
++#
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_ATMEL_MPOP is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
++# CONFIG_LOGO is not set
++CONFIG_SOUND=y
++CONFIG_SND=y
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++# CONFIG_SND_SUPPORT_OLD_API is not set
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++CONFIG_SND_DRIVERS=y
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++CONFIG_SND_SPI=y
++# CONFIG_SND_SOC is not set
++# CONFIG_SOUND_PRIME is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++# CONFIG_USB_OTG_WHITELIST is not set
++# CONFIG_USB_OTG_BLACKLIST_HUB is not set
++# CONFIG_USB_MUSB_HDRC is not set
++# CONFIG_USB_GADGET_MUSB_HDRC is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA25X is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_PXA27X is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_USB_G_PRINTER is not set
++# CONFIG_USB_CDC_COMPOSITE is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++CONFIG_MMC_ATMELMCI=y
++# CONFIG_MMC_SPI is not set
++# CONFIG_MEMSTICK is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++# CONFIG_LEDS_PCA9532 is not set
++CONFIG_LEDS_GPIO=y
++# CONFIG_LEDS_PCA955X is not set
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
++# CONFIG_RTC_DRV_AVR32_AST is not set
++# CONFIG_DMADEVICES is not set
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_DNOTIFY is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++CONFIG_FUSE_FS=m
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=850
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++# CONFIG_PROC_KCORE is not set
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=y
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_UBIFS_FS=y
++# CONFIG_UBIFS_FS_XATTR is not set
++# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
++CONFIG_UBIFS_FS_LZO=y
++CONFIG_UBIFS_FS_ZLIB=y
++# CONFIG_UBIFS_FS_DEBUG is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++CONFIG_ROOT_NFS=y
++CONFIG_NFSD=m
++CONFIG_NFSD_V3=y
++# CONFIG_NFSD_V3_ACL is not set
++# CONFIG_NFSD_V4 is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_EXPORTFS=m
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++CONFIG_SMB_FS=m
++# CONFIG_SMB_NLS_DEFAULT is not set
++CONFIG_CIFS=m
++# CONFIG_CIFS_STATS is not set
++# CONFIG_CIFS_WEAK_PW_HASH is not set
++# CONFIG_CIFS_XATTR is not set
++# CONFIG_CIFS_DEBUG2 is not set
++# CONFIG_CIFS_EXPERIMENTAL is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=m
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=m
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=m
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=m
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++# CONFIG_DEBUG_MEMORY_INIT is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++CONFIG_FRAME_POINTER=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_KPROBES_SANITY_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_LKDTM is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_AEAD=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_AUTHENC=y
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
++CONFIG_CRYPTO_CBC=y
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++CONFIG_CRYPTO_ECB=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++CONFIG_CRYPTO_HMAC=y
++# CONFIG_CRYPTO_XCBC is not set
++
++#
++# Digest
++#
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
++CONFIG_CRYPTO_SHA1=y
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_WP512 is not set
++
++#
++# Ciphers
++#
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++CONFIG_CRYPTO_ARC4=m
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++
++#
++# Compression
++#
++CONFIG_CRYPTO_DEFLATE=y
++CONFIG_CRYPTO_LZO=y
++CONFIG_CRYPTO_HW=y
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_GENERIC_FIND_FIRST_BIT is not set
++# CONFIG_GENERIC_FIND_NEXT_BIT is not set
++CONFIG_CRC_CCITT=m
++CONFIG_CRC16=y
++# CONFIG_CRC_T10DIF is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_LZO_COMPRESS=y
++CONFIG_LZO_DECOMPRESS=y
++CONFIG_GENERIC_ALLOCATOR=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
+index 69fce6b..42829bb 100644
+--- a/arch/avr32/configs/atstk1002_defconfig
++++ b/arch/avr32/configs/atstk1002_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.27-rc1
+-# Mon Aug  4 16:02:27 2008
++# Linux kernel version: 2.6.27.4
++# Wed Nov 12 10:28:45 2008
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+@@ -129,20 +129,24 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PORTMUX_PIO=y
+ CONFIG_PLATFORM_AT32AP=y
+ CONFIG_CPU_AT32AP700X=y
+ CONFIG_CPU_AT32AP7000=y
+ CONFIG_BOARD_ATSTK1000=y
+ # CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_FAVR_32 is not set
++# CONFIG_BOARD_MIMC200 is not set
+ CONFIG_BOARD_ATSTK1002=y
+ # CONFIG_BOARD_ATSTK1003 is not set
+ # CONFIG_BOARD_ATSTK1004 is not set
++# CONFIG_BOARD_ATSTK1005 is not set
+ # CONFIG_BOARD_ATSTK1006 is not set
+ # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
+ # CONFIG_BOARD_ATSTK100X_SPI1 is not set
+-# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++CONFIG_BOARD_ATSTK1000_J2_LED=y
+ # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
+-# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
++CONFIG_BOARD_ATSTK1000_J2_RGB=y
+ CONFIG_BOARD_ATSTK1000_EXTDAC=y
+ CONFIG_LOADER_U_BOOT=y
+ 
+@@ -186,7 +190,7 @@ CONFIG_HZ_250=y
+ # CONFIG_HZ_300 is not set
+ # CONFIG_HZ_1000 is not set
+ CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
++CONFIG_SCHED_HRTICK=y
+ CONFIG_CMDLINE=""
+ 
+ #
+@@ -360,7 +364,8 @@ CONFIG_MTD_CMDLINE_PARTS=y
+ #
+ CONFIG_MTD_CHAR=y
+ CONFIG_MTD_BLKDEVS=y
+-CONFIG_MTD_BLOCK=y
++# CONFIG_MTD_BLOCK is not set
++# CONFIG_MTD_BLOCK_RO is not set
+ # CONFIG_FTL is not set
+ # CONFIG_NFTL is not set
+ # CONFIG_INFTL is not set
+@@ -421,12 +426,23 @@ CONFIG_M25PXX_USE_FAST_READ=y
+ # CONFIG_MTD_DOC2001 is not set
+ # CONFIG_MTD_DOC2001PLUS is not set
+ # CONFIG_MTD_NAND is not set
++# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
++# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
++# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+ # CONFIG_MTD_ONENAND is not set
+ 
+ #
+ # UBI - Unsorted block images
+ #
+-# CONFIG_MTD_UBI is not set
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++
++#
++# UBI debugging options
++#
++# CONFIG_MTD_UBI_DEBUG is not set
+ # CONFIG_PARPORT is not set
+ CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+@@ -502,7 +518,7 @@ CONFIG_NETDEVICES=y
+ # CONFIG_BONDING is not set
+ # CONFIG_MACVLAN is not set
+ # CONFIG_EQUALIZER is not set
+-CONFIG_TUN=m
++# CONFIG_TUN is not set
+ # CONFIG_VETH is not set
+ CONFIG_PHYLIB=y
+ 
+@@ -561,7 +577,7 @@ CONFIG_SLHC=m
+ #
+ # Input device support
+ #
+-CONFIG_INPUT=m
++CONFIG_INPUT=y
+ # CONFIG_INPUT_FF_MEMLESS is not set
+ CONFIG_INPUT_POLLDEV=m
+ 
+@@ -590,6 +606,8 @@ CONFIG_KEYBOARD_GPIO=m
+ CONFIG_INPUT_MOUSE=y
+ # CONFIG_MOUSE_PS2 is not set
+ # CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_APPLETOUCH is not set
++# CONFIG_MOUSE_BCM5974 is not set
+ # CONFIG_MOUSE_VSXXXAA is not set
+ CONFIG_MOUSE_GPIO=m
+ # CONFIG_INPUT_JOYSTICK is not set
+@@ -606,8 +624,12 @@ CONFIG_MOUSE_GPIO=m
+ #
+ # Character devices
+ #
+-# CONFIG_VT is not set
+-# CONFIG_DEVKMEM is not set
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_DEVKMEM=y
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ 
+ #
+@@ -634,6 +656,7 @@ CONFIG_UNIX98_PTYS=y
+ CONFIG_I2C=m
+ CONFIG_I2C_BOARDINFO=y
+ CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_HELPER_AUTO=y
+ CONFIG_I2C_ALGOBIT=m
+ 
+ #
+@@ -663,7 +686,7 @@ CONFIG_I2C_GPIO=m
+ # Miscellaneous I2C Chip support
+ #
+ # CONFIG_DS1682 is not set
+-CONFIG_AT24=m
++# CONFIG_AT24 is not set
+ # CONFIG_SENSORS_EEPROM is not set
+ # CONFIG_SENSORS_PCF8574 is not set
+ # CONFIG_PCF8575 is not set
+@@ -683,6 +706,7 @@ CONFIG_SPI_MASTER=y
+ #
+ # SPI Master Controller Drivers
+ #
++CONFIG_SPI_ATMEL_HAVE_PDC=y
+ CONFIG_SPI_ATMEL=y
+ # CONFIG_SPI_BITBANG is not set
+ 
+@@ -725,7 +749,7 @@ CONFIG_WATCHDOG=y
+ # Watchdog Device Drivers
+ #
+ # CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_AT32AP700X_WDT=y
++CONFIG_AT32_WDT=y
+ 
+ #
+ # Sonics Silicon Backplane
+@@ -739,6 +763,7 @@ CONFIG_SSB_POSSIBLE=y
+ # CONFIG_MFD_CORE is not set
+ # CONFIG_MFD_SM501 is not set
+ # CONFIG_HTC_PASIC3 is not set
++# CONFIG_MFD_TMIO is not set
+ 
+ #
+ # Multimedia devices
+@@ -784,6 +809,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
+ #
+ # CONFIG_FB_S1D13XXX is not set
+ CONFIG_FB_ATMEL=y
++# CONFIG_FB_ATMEL_MPOP is not set
+ # CONFIG_FB_VIRTUAL is not set
+ CONFIG_BACKLIGHT_LCD_SUPPORT=y
+ CONFIG_LCD_CLASS_DEVICE=y
+@@ -797,6 +823,12 @@ CONFIG_LCD_LTV350QV=y
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
+ # CONFIG_LOGO is not set
+ CONFIG_SOUND=m
+ CONFIG_SND=m
+@@ -820,11 +852,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+ # CONFIG_SOUND_PRIME is not set
+ # CONFIG_HID_SUPPORT is not set
+ CONFIG_USB_SUPPORT=y
+-# CONFIG_USB_ARCH_HAS_HCD is not set
+-# CONFIG_USB_ARCH_HAS_OHCI is not set
+-# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
+ # CONFIG_USB_OTG_WHITELIST is not set
+ # CONFIG_USB_OTG_BLACKLIST_HUB is not set
++# CONFIG_USB_MUSB_HDRC is not set
++# CONFIG_USB_GADGET_MUSB_HDRC is not set
+ 
+ #
+ # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+@@ -876,6 +911,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
+ #
+ # CONFIG_MMC_SDHCI is not set
+ CONFIG_MMC_ATMELMCI=y
++# CONFIG_MMC_ATMELMCI_DMA is not set
+ CONFIG_MMC_SPI=m
+ # CONFIG_MEMSTICK is not set
+ CONFIG_NEW_LEDS=y
+@@ -952,11 +988,13 @@ CONFIG_RTC_INTF_DEV=y
+ # on-CPU RTC drivers
+ #
+ CONFIG_RTC_DRV_AT32AP700X=y
++# CONFIG_RTC_DRV_AVR32_AST is not set
+ CONFIG_DMADEVICES=y
+ 
+ #
+ # DMA Devices
+ #
++# CONFIG_ATMEL_PDCA is not set
+ CONFIG_DW_DMAC=y
+ CONFIG_DMA_ENGINE=y
+ 
+@@ -1017,7 +1055,7 @@ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
++CONFIG_CONFIGFS_FS=y
+ 
+ #
+ # Miscellaneous filesystems
+@@ -1031,7 +1069,8 @@ CONFIG_TMPFS=y
+ # CONFIG_EFS_FS is not set
+ CONFIG_JFFS2_FS=y
+ CONFIG_JFFS2_FS_DEBUG=0
+-# CONFIG_JFFS2_FS_WRITEBUFFER is not set
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+ # CONFIG_JFFS2_SUMMARY is not set
+ # CONFIG_JFFS2_FS_XATTR is not set
+ # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+@@ -1039,6 +1078,12 @@ CONFIG_JFFS2_ZLIB=y
+ # CONFIG_JFFS2_LZO is not set
+ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
++CONFIG_UBIFS_FS=y
++CONFIG_UBIFS_FS_XATTR=y
++# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
++CONFIG_UBIFS_FS_LZO=y
++CONFIG_UBIFS_FS_ZLIB=y
++# CONFIG_UBIFS_FS_DEBUG is not set
+ # CONFIG_CRAMFS is not set
+ # CONFIG_VXFS_FS is not set
+ CONFIG_MINIX_FS=m
+@@ -1173,7 +1218,7 @@ CONFIG_CRYPTO=y
+ #
+ # Crypto core or helper
+ #
+-CONFIG_CRYPTO_ALGAPI=m
++CONFIG_CRYPTO_ALGAPI=y
+ CONFIG_CRYPTO_AEAD=m
+ CONFIG_CRYPTO_BLKCIPHER=m
+ CONFIG_CRYPTO_HASH=m
+@@ -1247,8 +1292,8 @@ CONFIG_CRYPTO_DES=m
+ #
+ # Compression
+ #
+-CONFIG_CRYPTO_DEFLATE=m
+-# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_DEFLATE=y
++CONFIG_CRYPTO_LZO=y
+ # CONFIG_CRYPTO_HW is not set
+ 
+ #
+@@ -1258,7 +1303,7 @@ CONFIG_BITREVERSE=y
+ # CONFIG_GENERIC_FIND_FIRST_BIT is not set
+ # CONFIG_GENERIC_FIND_NEXT_BIT is not set
+ CONFIG_CRC_CCITT=m
+-# CONFIG_CRC16 is not set
++CONFIG_CRC16=y
+ CONFIG_CRC_T10DIF=m
+ CONFIG_CRC_ITU_T=m
+ CONFIG_CRC32=y
+@@ -1266,6 +1311,8 @@ CONFIG_CRC7=m
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_ZLIB_DEFLATE=y
++CONFIG_LZO_COMPRESS=y
++CONFIG_LZO_DECOMPRESS=y
+ CONFIG_GENERIC_ALLOCATOR=y
+ CONFIG_PLIST=y
+ CONFIG_HAS_IOMEM=y
+diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
+index 5477ed3..9eb129b 100644
+--- a/arch/avr32/configs/atstk1003_defconfig
++++ b/arch/avr32/configs/atstk1003_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.27-rc1
+-# Tue Aug  5 15:34:44 2008
++# Linux kernel version: 2.6.27.4
++# Wed Nov 12 10:33:33 2008
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+@@ -34,12 +34,9 @@ CONFIG_SWAP=y
+ CONFIG_SYSVIPC=y
+ CONFIG_SYSVIPC_SYSCTL=y
+ CONFIG_POSIX_MQUEUE=y
+-CONFIG_BSD_PROCESS_ACCT=y
+-CONFIG_BSD_PROCESS_ACCT_V3=y
+-CONFIG_TASKSTATS=y
+-CONFIG_TASK_DELAY_ACCT=y
+-# CONFIG_TASK_XACCT is not set
+-CONFIG_AUDIT=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
+ # CONFIG_CGROUPS is not set
+@@ -71,7 +68,7 @@ CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+ CONFIG_VM_EVENT_COUNTERS=y
+-# CONFIG_SLUB_DEBUG is not set
++CONFIG_SLUB_DEBUG=y
+ # CONFIG_SLAB is not set
+ CONFIG_SLUB=y
+ # CONFIG_SLOB is not set
+@@ -90,6 +87,7 @@ CONFIG_HAVE_KPROBES=y
+ CONFIG_HAVE_CLK=y
+ CONFIG_PROC_PAGE_MONITOR=y
+ # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
++CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=1
+@@ -131,20 +129,24 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PORTMUX_PIO=y
+ CONFIG_PLATFORM_AT32AP=y
+ CONFIG_CPU_AT32AP700X=y
+ CONFIG_CPU_AT32AP7001=y
+ CONFIG_BOARD_ATSTK1000=y
+ # CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_FAVR_32 is not set
++# CONFIG_BOARD_MIMC200 is not set
+ # CONFIG_BOARD_ATSTK1002 is not set
+ CONFIG_BOARD_ATSTK1003=y
+ # CONFIG_BOARD_ATSTK1004 is not set
++# CONFIG_BOARD_ATSTK1005 is not set
+ # CONFIG_BOARD_ATSTK1006 is not set
+ # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
+ # CONFIG_BOARD_ATSTK100X_SPI1 is not set
+-# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++CONFIG_BOARD_ATSTK1000_J2_LED=y
+ # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
+-# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
++CONFIG_BOARD_ATSTK1000_J2_RGB=y
+ CONFIG_BOARD_ATSTK1000_EXTDAC=y
+ CONFIG_LOADER_U_BOOT=y
+ 
+@@ -188,7 +190,7 @@ CONFIG_HZ_250=y
+ # CONFIG_HZ_300 is not set
+ # CONFIG_HZ_1000 is not set
+ CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
++CONFIG_SCHED_HRTICK=y
+ CONFIG_CMDLINE=""
+ 
+ #
+@@ -239,40 +241,71 @@ CONFIG_NET=y
+ CONFIG_PACKET=y
+ CONFIG_PACKET_MMAP=y
+ CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=m
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_XFRM_IPCOMP=m
++CONFIG_NET_KEY=m
++# CONFIG_NET_KEY_MIGRATE is not set
+ CONFIG_INET=y
+ # CONFIG_IP_MULTICAST is not set
+ # CONFIG_IP_ADVANCED_ROUTER is not set
+ CONFIG_IP_FIB_HASH=y
+-# CONFIG_IP_PNP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++CONFIG_NET_IPIP=m
++CONFIG_NET_IPGRE=m
+ # CONFIG_ARPD is not set
+ # CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
+ # CONFIG_INET_IPCOMP is not set
+ # CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
++CONFIG_INET_TUNNEL=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
+ # CONFIG_INET_LRO is not set
+-# CONFIG_INET_DIAG is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
+ # CONFIG_TCP_CONG_ADVANCED is not set
+ CONFIG_TCP_CONG_CUBIC=y
+ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
++CONFIG_IPV6=m
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++# CONFIG_IPV6_MIP6 is not set
++CONFIG_INET6_XFRM_TUNNEL=m
++CONFIG_INET6_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_NDISC_NODETYPE=y
++CONFIG_IPV6_TUNNEL=m
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
++# CONFIG_IPV6_MROUTE is not set
+ # CONFIG_NETWORK_SECMARK is not set
+ # CONFIG_NETFILTER is not set
+ # CONFIG_IP_DCCP is not set
+ # CONFIG_IP_SCTP is not set
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
++CONFIG_STP=m
++CONFIG_BRIDGE=m
+ # CONFIG_VLAN_8021Q is not set
+ # CONFIG_DECNET is not set
++CONFIG_LLC=m
+ # CONFIG_LLC2 is not set
+ # CONFIG_IPX is not set
+ # CONFIG_ATALK is not set
+@@ -331,7 +364,8 @@ CONFIG_MTD_CMDLINE_PARTS=y
+ #
+ CONFIG_MTD_CHAR=y
+ CONFIG_MTD_BLKDEVS=y
+-CONFIG_MTD_BLOCK=y
++# CONFIG_MTD_BLOCK is not set
++# CONFIG_MTD_BLOCK_RO is not set
+ # CONFIG_FTL is not set
+ # CONFIG_NFTL is not set
+ # CONFIG_INFTL is not set
+@@ -397,7 +431,15 @@ CONFIG_M25PXX_USE_FAST_READ=y
+ #
+ # UBI - Unsorted block images
+ #
+-# CONFIG_MTD_UBI is not set
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++
++#
++# UBI debugging options
++#
++# CONFIG_MTD_UBI_DEBUG is not set
+ # CONFIG_PARPORT is not set
+ CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+@@ -458,9 +500,7 @@ CONFIG_SCSI_WAIT_SCAN=m
+ # CONFIG_SCSI_ISCSI_ATTRS is not set
+ # CONFIG_SCSI_SAS_LIBSAS is not set
+ # CONFIG_SCSI_SRP_ATTRS is not set
+-CONFIG_SCSI_LOWLEVEL=y
+-# CONFIG_ISCSI_TCP is not set
+-# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_LOWLEVEL is not set
+ # CONFIG_SCSI_DH is not set
+ CONFIG_ATA=m
+ # CONFIG_ATA_NONSTANDARD is not set
+@@ -477,7 +517,32 @@ CONFIG_NETDEVICES=y
+ # CONFIG_EQUALIZER is not set
+ # CONFIG_TUN is not set
+ # CONFIG_VETH is not set
+-# CONFIG_NET_ETHERNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++CONFIG_MACB=y
++# CONFIG_ENC28J60 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+ 
+@@ -509,7 +574,7 @@ CONFIG_SLHC=m
+ #
+ # Input device support
+ #
+-CONFIG_INPUT=m
++CONFIG_INPUT=y
+ # CONFIG_INPUT_FF_MEMLESS is not set
+ CONFIG_INPUT_POLLDEV=m
+ 
+@@ -521,7 +586,7 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
+ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+ # CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
++CONFIG_INPUT_EVDEV=m
+ # CONFIG_INPUT_EVBUG is not set
+ 
+ #
+@@ -538,6 +603,8 @@ CONFIG_KEYBOARD_GPIO=m
+ CONFIG_INPUT_MOUSE=y
+ # CONFIG_MOUSE_PS2 is not set
+ # CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_APPLETOUCH is not set
++# CONFIG_MOUSE_BCM5974 is not set
+ # CONFIG_MOUSE_VSXXXAA is not set
+ CONFIG_MOUSE_GPIO=m
+ # CONFIG_INPUT_JOYSTICK is not set
+@@ -555,7 +622,7 @@ CONFIG_MOUSE_GPIO=m
+ # Character devices
+ #
+ # CONFIG_VT is not set
+-# CONFIG_DEVKMEM is not set
++CONFIG_DEVKMEM=y
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ 
+ #
+@@ -582,6 +649,7 @@ CONFIG_UNIX98_PTYS=y
+ CONFIG_I2C=m
+ CONFIG_I2C_BOARDINFO=y
+ CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_HELPER_AUTO=y
+ CONFIG_I2C_ALGOBIT=m
+ 
+ #
+@@ -611,7 +679,7 @@ CONFIG_I2C_GPIO=m
+ # Miscellaneous I2C Chip support
+ #
+ # CONFIG_DS1682 is not set
+-CONFIG_AT24=m
++# CONFIG_AT24 is not set
+ # CONFIG_SENSORS_EEPROM is not set
+ # CONFIG_SENSORS_PCF8574 is not set
+ # CONFIG_PCF8575 is not set
+@@ -631,6 +699,7 @@ CONFIG_SPI_MASTER=y
+ #
+ # SPI Master Controller Drivers
+ #
++CONFIG_SPI_ATMEL_HAVE_PDC=y
+ CONFIG_SPI_ATMEL=y
+ # CONFIG_SPI_BITBANG is not set
+ 
+@@ -673,7 +742,7 @@ CONFIG_WATCHDOG=y
+ # Watchdog Device Drivers
+ #
+ # CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_AT32AP700X_WDT=y
++CONFIG_AT32_WDT=y
+ 
+ #
+ # Sonics Silicon Backplane
+@@ -687,6 +756,7 @@ CONFIG_SSB_POSSIBLE=y
+ # CONFIG_MFD_CORE is not set
+ # CONFIG_MFD_SM501 is not set
+ # CONFIG_HTC_PASIC3 is not set
++# CONFIG_MFD_TMIO is not set
+ 
+ #
+ # Multimedia devices
+@@ -726,8 +796,8 @@ CONFIG_SND_MIXER_OSS=m
+ CONFIG_SND_PCM_OSS=m
+ CONFIG_SND_PCM_OSS_PLUGINS=y
+ # CONFIG_SND_DYNAMIC_MINORS is not set
+-CONFIG_SND_SUPPORT_OLD_API=y
+-CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_SUPPORT_OLD_API is not set
++# CONFIG_SND_VERBOSE_PROCFS is not set
+ # CONFIG_SND_VERBOSE_PRINTK is not set
+ # CONFIG_SND_DEBUG is not set
+ # CONFIG_SND_DRIVERS is not set
+@@ -738,11 +808,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+ # CONFIG_SOUND_PRIME is not set
+ # CONFIG_HID_SUPPORT is not set
+ CONFIG_USB_SUPPORT=y
+-# CONFIG_USB_ARCH_HAS_HCD is not set
+-# CONFIG_USB_ARCH_HAS_OHCI is not set
+-# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
+ # CONFIG_USB_OTG_WHITELIST is not set
+ # CONFIG_USB_OTG_BLACKLIST_HUB is not set
++# CONFIG_USB_MUSB_HDRC is not set
++# CONFIG_USB_GADGET_MUSB_HDRC is not set
+ 
+ #
+ # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+@@ -750,7 +823,7 @@ CONFIG_USB_SUPPORT=y
+ CONFIG_USB_GADGET=y
+ # CONFIG_USB_GADGET_DEBUG is not set
+ # CONFIG_USB_GADGET_DEBUG_FILES is not set
+-CONFIG_USB_GADGET_DEBUG_FS=y
++# CONFIG_USB_GADGET_DEBUG_FS is not set
+ CONFIG_USB_GADGET_SELECTED=y
+ # CONFIG_USB_GADGET_AMD5536UDC is not set
+ CONFIG_USB_GADGET_ATMEL_USBA=y
+@@ -787,33 +860,34 @@ CONFIG_MMC=y
+ CONFIG_MMC_BLOCK=y
+ CONFIG_MMC_BLOCK_BOUNCE=y
+ # CONFIG_SDIO_UART is not set
+-CONFIG_MMC_TEST=m
++# CONFIG_MMC_TEST is not set
+ 
+ #
+ # MMC/SD Host Controller Drivers
+ #
+ # CONFIG_MMC_SDHCI is not set
+ CONFIG_MMC_ATMELMCI=y
++# CONFIG_MMC_ATMELMCI_DMA is not set
+ CONFIG_MMC_SPI=m
+ # CONFIG_MEMSTICK is not set
+ CONFIG_NEW_LEDS=y
+-CONFIG_LEDS_CLASS=y
++CONFIG_LEDS_CLASS=m
+ 
+ #
+ # LED drivers
+ #
+ CONFIG_LEDS_ATMEL_PWM=m
+ # CONFIG_LEDS_PCA9532 is not set
+-CONFIG_LEDS_GPIO=y
++CONFIG_LEDS_GPIO=m
+ # CONFIG_LEDS_PCA955X is not set
+ 
+ #
+ # LED Triggers
+ #
+ CONFIG_LEDS_TRIGGERS=y
+-CONFIG_LEDS_TRIGGER_TIMER=y
+-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
++CONFIG_LEDS_TRIGGER_TIMER=m
++CONFIG_LEDS_TRIGGER_HEARTBEAT=m
++CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+ # CONFIG_ACCESSIBILITY is not set
+ CONFIG_RTC_LIB=y
+ CONFIG_RTC_CLASS=y
+@@ -870,11 +944,13 @@ CONFIG_RTC_INTF_DEV=y
+ # on-CPU RTC drivers
+ #
+ CONFIG_RTC_DRV_AT32AP700X=y
++# CONFIG_RTC_DRV_AVR32_AST is not set
+ CONFIG_DMADEVICES=y
+ 
+ #
+ # DMA Devices
+ #
++# CONFIG_ATMEL_PDCA is not set
+ CONFIG_DW_DMAC=y
+ CONFIG_DMA_ENGINE=y
+ 
+@@ -888,13 +964,13 @@ CONFIG_DMATEST=m
+ #
+ # File systems
+ #
+-CONFIG_EXT2_FS=m
++CONFIG_EXT2_FS=y
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=m
++CONFIG_EXT3_FS=y
+ # CONFIG_EXT3_FS_XATTR is not set
+ # CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=m
++CONFIG_JBD=y
+ # CONFIG_JBD_DEBUG is not set
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+@@ -935,7 +1011,7 @@ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-CONFIG_CONFIGFS_FS=m
++CONFIG_CONFIGFS_FS=y
+ 
+ #
+ # Miscellaneous filesystems
+@@ -958,16 +1034,39 @@ CONFIG_JFFS2_ZLIB=y
+ # CONFIG_JFFS2_LZO is not set
+ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
++CONFIG_UBIFS_FS=y
++CONFIG_UBIFS_FS_XATTR=y
++# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
++CONFIG_UBIFS_FS_LZO=y
++CONFIG_UBIFS_FS_ZLIB=y
++# CONFIG_UBIFS_FS_DEBUG is not set
+ # CONFIG_CRAMFS is not set
+ # CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
++CONFIG_MINIX_FS=m
+ # CONFIG_OMFS_FS is not set
+ # CONFIG_HPFS_FS is not set
+ # CONFIG_QNX4FS_FS is not set
+ # CONFIG_ROMFS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+-# CONFIG_NETWORK_FILESYSTEMS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++CONFIG_ROOT_NFS=y
++# CONFIG_NFSD is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
+ 
+ #
+ # Partition Types
+@@ -1036,6 +1135,8 @@ CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
+ # CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+@@ -1068,7 +1169,88 @@ CONFIG_FRAME_POINTER=y
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+ # CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-# CONFIG_CRYPTO is not set
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_AEAD=m
++CONFIG_CRYPTO_BLKCIPHER=m
++CONFIG_CRYPTO_HASH=m
++CONFIG_CRYPTO_MANAGER=m
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_AUTHENC=m
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
++CONFIG_CRYPTO_CBC=m
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++CONFIG_CRYPTO_HMAC=m
++# CONFIG_CRYPTO_XCBC is not set
++
++#
++# Digest
++#
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=m
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
++CONFIG_CRYPTO_SHA1=m
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_WP512 is not set
++
++#
++# Ciphers
++#
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++CONFIG_CRYPTO_DES=m
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++
++#
++# Compression
++#
++CONFIG_CRYPTO_DEFLATE=y
++CONFIG_CRYPTO_LZO=y
++# CONFIG_CRYPTO_HW is not set
+ 
+ #
+ # Library routines
+@@ -1077,15 +1259,16 @@ CONFIG_BITREVERSE=y
+ # CONFIG_GENERIC_FIND_FIRST_BIT is not set
+ # CONFIG_GENERIC_FIND_NEXT_BIT is not set
+ CONFIG_CRC_CCITT=m
+-# CONFIG_CRC16 is not set
++CONFIG_CRC16=y
+ CONFIG_CRC_T10DIF=m
+ CONFIG_CRC_ITU_T=m
+ CONFIG_CRC32=y
+ CONFIG_CRC7=m
+ # CONFIG_LIBCRC32C is not set
+-CONFIG_AUDIT_GENERIC=y
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_ZLIB_DEFLATE=y
++CONFIG_LZO_COMPRESS=y
++CONFIG_LZO_DECOMPRESS=y
+ CONFIG_GENERIC_ALLOCATOR=y
+ CONFIG_PLIST=y
+ CONFIG_HAS_IOMEM=y
+diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
+index 69e6c0d..9f76e2a 100644
+--- a/arch/avr32/configs/atstk1004_defconfig
++++ b/arch/avr32/configs/atstk1004_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.27-rc1
+-# Tue Aug  5 15:38:56 2008
++# Linux kernel version: 2.6.27.4
++# Wed Nov 12 10:35:14 2008
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+@@ -30,8 +30,10 @@ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+ CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
+-# CONFIG_SYSVIPC is not set
+-# CONFIG_POSIX_MQUEUE is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+ # CONFIG_AUDIT is not set
+@@ -41,14 +43,16 @@ CONFIG_LOG_BUF_SHIFT=14
+ # CONFIG_GROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
++CONFIG_RELAY=y
+ # CONFIG_NAMESPACES is not set
+-# CONFIG_BLK_DEV_INITRD is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SYSCTL=y
+ CONFIG_EMBEDDED=y
+ # CONFIG_SYSCTL_SYSCALL is not set
+ CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
+ # CONFIG_KALLSYMS_EXTRA_PASS is not set
+ CONFIG_HOTPLUG=y
+ CONFIG_PRINTK=y
+@@ -56,19 +60,23 @@ CONFIG_BUG=y
+ CONFIG_ELF_CORE=y
+ # CONFIG_COMPAT_BRK is not set
+ # CONFIG_BASE_FULL is not set
+-# CONFIG_FUTEX is not set
+-# CONFIG_EPOLL is not set
+-# CONFIG_SIGNALFD is not set
+-# CONFIG_TIMERFD is not set
+-# CONFIG_EVENTFD is not set
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+ CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
+ # CONFIG_SLAB is not set
+-# CONFIG_SLUB is not set
+-CONFIG_SLOB=y
+-# CONFIG_PROFILING is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++CONFIG_PROFILING=y
+ # CONFIG_MARKERS is not set
++CONFIG_OPROFILE=m
+ CONFIG_HAVE_OPROFILE=y
++CONFIG_KPROBES=y
+ # CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+ # CONFIG_HAVE_IOREMAP_PROT is not set
+ CONFIG_HAVE_KPROBES=y
+@@ -77,36 +85,68 @@ CONFIG_HAVE_KPROBES=y
+ # CONFIG_HAVE_DMA_ATTRS is not set
+ # CONFIG_USE_GENERIC_SMP_HELPERS is not set
+ CONFIG_HAVE_CLK=y
+-# CONFIG_PROC_PAGE_MONITOR is not set
++CONFIG_PROC_PAGE_MONITOR=y
+ # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=1
+-# CONFIG_MODULES is not set
+-# CONFIG_BLOCK is not set
++CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_AS is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
+ CONFIG_CLASSIC_RCU=y
+ 
+ #
+ # System Type and features
+ #
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
+ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PORTMUX_PIO=y
+ CONFIG_PLATFORM_AT32AP=y
+ CONFIG_CPU_AT32AP700X=y
+ CONFIG_CPU_AT32AP7002=y
+ CONFIG_BOARD_ATSTK1000=y
+ # CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_FAVR_32 is not set
++# CONFIG_BOARD_MIMC200 is not set
+ # CONFIG_BOARD_ATSTK1002 is not set
+ # CONFIG_BOARD_ATSTK1003 is not set
+ CONFIG_BOARD_ATSTK1004=y
++# CONFIG_BOARD_ATSTK1005 is not set
+ # CONFIG_BOARD_ATSTK1006 is not set
+ # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
+ # CONFIG_BOARD_ATSTK100X_SPI1 is not set
+-# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++CONFIG_BOARD_ATSTK1000_J2_LED=y
++# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
++CONFIG_BOARD_ATSTK1000_J2_RGB=y
+ CONFIG_BOARD_ATSTK1000_EXTDAC=y
+ CONFIG_LOADER_U_BOOT=y
+ 
+@@ -144,25 +184,43 @@ CONFIG_ZONE_DMA_FLAG=0
+ CONFIG_NR_QUICK=2
+ CONFIG_VIRT_TO_BUS=y
+ # CONFIG_OWNERSHIP_TRACE is not set
+-# CONFIG_NMI_DEBUGGING is not set
++CONFIG_NMI_DEBUGGING=y
+ # CONFIG_HZ_100 is not set
+ CONFIG_HZ_250=y
+ # CONFIG_HZ_300 is not set
+ # CONFIG_HZ_1000 is not set
+ CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
++CONFIG_SCHED_HRTICK=y
+ CONFIG_CMDLINE=""
+ 
+ #
+ # Power management options
+ #
+-# CONFIG_PM is not set
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
+ CONFIG_ARCH_SUSPEND_POSSIBLE=y
+ 
+ #
+ # CPU Frequency scaling
+ #
+-# CONFIG_CPU_FREQ is not set
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
+ 
+ #
+ # Bus options
+@@ -183,40 +241,71 @@ CONFIG_NET=y
+ CONFIG_PACKET=y
+ CONFIG_PACKET_MMAP=y
+ CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=m
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_XFRM_IPCOMP=m
++CONFIG_NET_KEY=m
++# CONFIG_NET_KEY_MIGRATE is not set
+ CONFIG_INET=y
+ # CONFIG_IP_MULTICAST is not set
+ # CONFIG_IP_ADVANCED_ROUTER is not set
+ CONFIG_IP_FIB_HASH=y
+-# CONFIG_IP_PNP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++CONFIG_NET_IPIP=m
++CONFIG_NET_IPGRE=m
+ # CONFIG_ARPD is not set
+ # CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
+ # CONFIG_INET_IPCOMP is not set
+ # CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
++CONFIG_INET_TUNNEL=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
+ # CONFIG_INET_LRO is not set
+-# CONFIG_INET_DIAG is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
+ # CONFIG_TCP_CONG_ADVANCED is not set
+ CONFIG_TCP_CONG_CUBIC=y
+ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
++CONFIG_IPV6=m
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++# CONFIG_IPV6_MIP6 is not set
++CONFIG_INET6_XFRM_TUNNEL=m
++CONFIG_INET6_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_NDISC_NODETYPE=y
++CONFIG_IPV6_TUNNEL=m
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
++# CONFIG_IPV6_MROUTE is not set
+ # CONFIG_NETWORK_SECMARK is not set
+ # CONFIG_NETFILTER is not set
+ # CONFIG_IP_DCCP is not set
+ # CONFIG_IP_SCTP is not set
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
++CONFIG_STP=m
++CONFIG_BRIDGE=m
+ # CONFIG_VLAN_8021Q is not set
+ # CONFIG_DECNET is not set
++CONFIG_LLC=m
+ # CONFIG_LLC2 is not set
+ # CONFIG_IPX is not set
+ # CONFIG_ATALK is not set
+@@ -230,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # Network testing
+ #
+ # CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_TCPPROBE is not set
+ # CONFIG_HAMRADIO is not set
+ # CONFIG_CAN is not set
+ # CONFIG_IRDA is not set
+@@ -257,6 +347,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+ CONFIG_STANDALONE=y
+ # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+ # CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+ # CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
+@@ -271,6 +363,14 @@ CONFIG_MTD_CMDLINE_PARTS=y
+ # User Modules And Translation Layers
+ #
+ CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++# CONFIG_MTD_BLOCK is not set
++# CONFIG_MTD_BLOCK_RO is not set
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
+ # CONFIG_MTD_OOPS is not set
+ 
+ #
+@@ -311,11 +411,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+ #
+ # Self-contained MTD device drivers
+ #
+-# CONFIG_MTD_DATAFLASH is not set
+-# CONFIG_MTD_M25P80 is not set
++CONFIG_MTD_DATAFLASH=m
++CONFIG_MTD_M25P80=m
++CONFIG_M25PXX_USE_FAST_READ=y
+ # CONFIG_MTD_SLRAM is not set
+ # CONFIG_MTD_PHRAM is not set
+ # CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
+ 
+ #
+ # Disk-On-Chip Device Drivers
+@@ -329,24 +431,186 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+ #
+ # UBI - Unsorted block images
+ #
+-# CONFIG_MTD_UBI is not set
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++
++#
++# UBI debugging options
++#
++# CONFIG_MTD_UBI_DEBUG is not set
+ # CONFIG_PARPORT is not set
+-# CONFIG_MISC_DEVICES is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=m
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++CONFIG_ATMEL_PWM=m
++CONFIG_ATMEL_TCLIB=y
++CONFIG_ATMEL_TCB_CLKSRC=y
++CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=m
++# CONFIG_ENCLOSURE_SERVICES is not set
+ # CONFIG_HAVE_IDE is not set
+ 
+ #
+ # SCSI device support
+ #
+-# CONFIG_SCSI_DMA is not set
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
+ # CONFIG_SCSI_NETLINK is not set
+-# CONFIG_NETDEVICES is not set
++# CONFIG_SCSI_PROC_FS is not set
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=m
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++CONFIG_BLK_DEV_SR=m
++# CONFIG_BLK_DEV_SR_VENDOR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++# CONFIG_SCSI_LOWLEVEL is not set
++# CONFIG_SCSI_DH is not set
++CONFIG_ATA=m
++# CONFIG_ATA_NONSTANDARD is not set
++# CONFIG_SATA_PMP is not set
++CONFIG_ATA_SFF=y
++# CONFIG_SATA_MV is not set
++CONFIG_PATA_AT32=m
++# CONFIG_PATA_PLATFORM is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++CONFIG_MACB=y
++# CONFIG_ENC28J60 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_IWLWIFI_LEDS is not set
++# CONFIG_WAN is not set
++CONFIG_PPP=m
++# CONFIG_PPP_MULTILINK is not set
++# CONFIG_PPP_FILTER is not set
++CONFIG_PPP_ASYNC=m
++# CONFIG_PPP_SYNC_TTY is not set
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++# CONFIG_PPP_MPPE is not set
++# CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
+ # CONFIG_ISDN is not set
+ # CONFIG_PHONE is not set
+ 
+ #
+ # Input device support
+ #
+-# CONFIG_INPUT is not set
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++CONFIG_INPUT_POLLDEV=m
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_APPLETOUCH is not set
++# CONFIG_MOUSE_BCM5974 is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++CONFIG_MOUSE_GPIO=m
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
+ 
+ #
+ # Hardware I/O ports
+@@ -357,8 +621,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+ #
+ # Character devices
+ #
+-# CONFIG_VT is not set
+-# CONFIG_DEVKMEM is not set
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_DEVKMEM=y
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ 
+ #
+@@ -371,7 +639,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+ #
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
+-# CONFIG_SERIAL_ATMEL_PDC is not set
++CONFIG_SERIAL_ATMEL_PDC=y
+ # CONFIG_SERIAL_ATMEL_TTYAT is not set
+ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+@@ -380,14 +648,62 @@ CONFIG_UNIX98_PTYS=y
+ # CONFIG_IPMI_HANDLER is not set
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
+ # CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_HELPER_AUTO=y
++CONFIG_I2C_ALGOBIT=m
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_SIMTEC is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_AT24 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
+ CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
+ CONFIG_SPI_MASTER=y
+ 
+ #
+ # SPI Master Controller Drivers
+ #
++CONFIG_SPI_ATMEL_HAVE_PDC=y
+ CONFIG_SPI_ATMEL=y
+ # CONFIG_SPI_BITBANG is not set
+ 
+@@ -395,15 +711,19 @@ CONFIG_SPI_ATMEL=y
+ # SPI Protocol Masters
+ #
+ # CONFIG_SPI_AT25 is not set
+-# CONFIG_SPI_SPIDEV is not set
++CONFIG_SPI_SPIDEV=m
+ # CONFIG_SPI_TLE62X0 is not set
+ CONFIG_ARCH_REQUIRE_GPIOLIB=y
+ CONFIG_GPIOLIB=y
+-# CONFIG_GPIO_SYSFS is not set
++# CONFIG_DEBUG_GPIO is not set
++CONFIG_GPIO_SYSFS=y
+ 
+ #
+ # I2C GPIO expanders:
+ #
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_GPIO_PCF857X is not set
+ 
+ #
+ # PCI GPIO expanders:
+@@ -426,7 +746,7 @@ CONFIG_WATCHDOG=y
+ # Watchdog Device Drivers
+ #
+ # CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_AT32AP700X_WDT=y
++CONFIG_AT32_WDT=y
+ 
+ #
+ # Sonics Silicon Backplane
+@@ -440,6 +760,7 @@ CONFIG_SSB_POSSIBLE=y
+ # CONFIG_MFD_CORE is not set
+ # CONFIG_MFD_SM501 is not set
+ # CONFIG_HTC_PASIC3 is not set
++# CONFIG_MFD_TMIO is not set
+ 
+ #
+ # Multimedia devices
+@@ -485,6 +806,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
+ #
+ # CONFIG_FB_S1D13XXX is not set
+ CONFIG_FB_ATMEL=y
++# CONFIG_FB_ATMEL_MPOP is not set
+ # CONFIG_FB_VIRTUAL is not set
+ CONFIG_BACKLIGHT_LCD_SUPPORT=y
+ CONFIG_LCD_CLASS_DEVICE=y
+@@ -498,20 +820,51 @@ CONFIG_LCD_LTV350QV=y
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
+ # CONFIG_LOGO is not set
+-# CONFIG_SOUND is not set
++CONFIG_SOUND=m
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++# CONFIG_SND_SUPPORT_OLD_API is not set
++# CONFIG_SND_VERBOSE_PROCFS is not set
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++# CONFIG_SND_DRIVERS is not set
++CONFIG_SND_SPI=y
++CONFIG_SND_AT73C213=m
++CONFIG_SND_AT73C213_TARGET_BITRATE=48000
++# CONFIG_SND_SOC is not set
++# CONFIG_SOUND_PRIME is not set
++# CONFIG_HID_SUPPORT is not set
+ CONFIG_USB_SUPPORT=y
+-# CONFIG_USB_ARCH_HAS_HCD is not set
+-# CONFIG_USB_ARCH_HAS_OHCI is not set
+-# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
+ # CONFIG_USB_OTG_WHITELIST is not set
+ # CONFIG_USB_OTG_BLACKLIST_HUB is not set
++# CONFIG_USB_MUSB_HDRC is not set
++# CONFIG_USB_GADGET_MUSB_HDRC is not set
+ 
+ #
+ # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+ CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
+ # CONFIG_USB_GADGET_DEBUG_FILES is not set
++# CONFIG_USB_GADGET_DEBUG_FS is not set
+ CONFIG_USB_GADGET_SELECTED=y
+ # CONFIG_USB_GADGET_AMD5536UDC is not set
+ CONFIG_USB_GADGET_ATMEL_USBA=y
+@@ -528,18 +881,54 @@ CONFIG_USB_ATMEL_USBA=y
+ # CONFIG_USB_GADGET_AT91 is not set
+ # CONFIG_USB_GADGET_DUMMY_HCD is not set
+ CONFIG_USB_GADGET_DUALSPEED=y
+-# CONFIG_USB_ZERO is not set
+-CONFIG_USB_ETH=y
+-# CONFIG_USB_ETH_RNDIS is not set
+-# CONFIG_USB_GADGETFS is not set
+-# CONFIG_USB_FILE_STORAGE is not set
+-# CONFIG_USB_G_SERIAL is not set
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
+ # CONFIG_USB_MIDI_GADGET is not set
+ # CONFIG_USB_G_PRINTER is not set
+-# CONFIG_USB_CDC_COMPOSITE is not set
+-# CONFIG_MMC is not set
++CONFIG_USB_CDC_COMPOSITE=m
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++CONFIG_MMC_ATMELMCI=y
++# CONFIG_MMC_ATMELMCI_DMA is not set
++CONFIG_MMC_SPI=m
+ # CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=m
++
++#
++# LED drivers
++#
++CONFIG_LEDS_ATMEL_PWM=m
++# CONFIG_LEDS_PCA9532 is not set
++CONFIG_LEDS_GPIO=m
++# CONFIG_LEDS_PCA955X is not set
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=m
++CONFIG_LEDS_TRIGGER_HEARTBEAT=m
++CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+ # CONFIG_ACCESSIBILITY is not set
+ CONFIG_RTC_LIB=y
+ CONFIG_RTC_CLASS=y
+@@ -551,12 +940,28 @@ CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+ # RTC interfaces
+ #
+ CONFIG_RTC_INTF_SYSFS=y
+-# CONFIG_RTC_INTF_PROC is not set
++CONFIG_RTC_INTF_PROC=y
+ CONFIG_RTC_INTF_DEV=y
+ # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+ # CONFIG_RTC_DRV_TEST is not set
+ 
+ #
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++
++#
+ # SPI RTC drivers
+ #
+ # CONFIG_RTC_DRV_M41T94 is not set
+@@ -580,18 +985,62 @@ CONFIG_RTC_INTF_DEV=y
+ # on-CPU RTC drivers
+ #
+ CONFIG_RTC_DRV_AT32AP700X=y
+-# CONFIG_DMADEVICES is not set
++# CONFIG_RTC_DRV_AVR32_AST is not set
++CONFIG_DMADEVICES=y
++
++#
++# DMA Devices
++#
++# CONFIG_ATMEL_PDCA is not set
++CONFIG_DW_DMAC=y
++CONFIG_DMA_ENGINE=y
++
++#
++# DMA Clients
++#
++# CONFIG_NET_DMA is not set
++CONFIG_DMATEST=m
+ # CONFIG_UIO is not set
+ 
+ #
+ # File systems
+ #
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_OCFS2_FS is not set
+ # CONFIG_DNOTIFY is not set
+-# CONFIG_INOTIFY is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
+ # CONFIG_AUTOFS_FS is not set
+ # CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
++CONFIG_FUSE_FS=m
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
+ 
+ #
+ # Pseudo filesystems
+@@ -603,14 +1052,22 @@ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
++CONFIG_CONFIGFS_FS=y
+ 
+ #
+ # Miscellaneous filesystems
+ #
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
+ CONFIG_JFFS2_FS=y
+ CONFIG_JFFS2_FS_DEBUG=0
+-# CONFIG_JFFS2_FS_WRITEBUFFER is not set
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+ # CONFIG_JFFS2_SUMMARY is not set
+ # CONFIG_JFFS2_FS_XATTR is not set
+ # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+@@ -618,8 +1075,85 @@ CONFIG_JFFS2_ZLIB=y
+ # CONFIG_JFFS2_LZO is not set
+ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
+-# CONFIG_NETWORK_FILESYSTEMS is not set
+-# CONFIG_NLS is not set
++CONFIG_UBIFS_FS=y
++CONFIG_UBIFS_FS_XATTR=y
++# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
++CONFIG_UBIFS_FS_LZO=y
++CONFIG_UBIFS_FS_ZLIB=y
++# CONFIG_UBIFS_FS_DEBUG is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++CONFIG_MINIX_FS=m
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++CONFIG_ROOT_NFS=y
++# CONFIG_NFSD is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=m
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=m
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=m
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
+ # CONFIG_DLM is not set
+ 
+ #
+@@ -631,11 +1165,43 @@ CONFIG_ENABLE_MUST_CHECK=y
+ CONFIG_FRAME_WARN=1024
+ CONFIG_MAGIC_SYSRQ=y
+ # CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
++CONFIG_DEBUG_FS=y
+ # CONFIG_HEADERS_CHECK is not set
+-# CONFIG_DEBUG_KERNEL is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
+ # CONFIG_DEBUG_MEMORY_INIT is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++CONFIG_FRAME_POINTER=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_KPROBES_SANITY_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_LKDTM is not set
++# CONFIG_FAULT_INJECTION is not set
+ # CONFIG_SAMPLES is not set
+ 
+ #
+@@ -644,7 +1210,88 @@ CONFIG_MAGIC_SYSRQ=y
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+ # CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-# CONFIG_CRYPTO is not set
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_AEAD=m
++CONFIG_CRYPTO_BLKCIPHER=m
++CONFIG_CRYPTO_HASH=m
++CONFIG_CRYPTO_MANAGER=m
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_AUTHENC=m
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
++CONFIG_CRYPTO_CBC=m
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++CONFIG_CRYPTO_HMAC=m
++# CONFIG_CRYPTO_XCBC is not set
++
++#
++# Digest
++#
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=m
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
++CONFIG_CRYPTO_SHA1=m
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_WP512 is not set
++
++#
++# Ciphers
++#
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++CONFIG_CRYPTO_DES=m
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++
++#
++# Compression
++#
++CONFIG_CRYPTO_DEFLATE=y
++CONFIG_CRYPTO_LZO=y
++# CONFIG_CRYPTO_HW is not set
+ 
+ #
+ # Library routines
+@@ -652,16 +1299,19 @@ CONFIG_MAGIC_SYSRQ=y
+ CONFIG_BITREVERSE=y
+ # CONFIG_GENERIC_FIND_FIRST_BIT is not set
+ # CONFIG_GENERIC_FIND_NEXT_BIT is not set
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_T10DIF is not set
+-# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC_CCITT=m
++CONFIG_CRC16=y
++CONFIG_CRC_T10DIF=m
++CONFIG_CRC_ITU_T=m
+ CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
++CONFIG_CRC7=m
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_ZLIB_DEFLATE=y
++CONFIG_LZO_COMPRESS=y
++CONFIG_LZO_DECOMPRESS=y
+ CONFIG_GENERIC_ALLOCATOR=y
++CONFIG_PLIST=y
+ CONFIG_HAS_IOMEM=y
+ CONFIG_HAS_IOPORT=y
+ CONFIG_HAS_DMA=y
+diff --git a/arch/avr32/configs/atstk1005_defconfig b/arch/avr32/configs/atstk1005_defconfig
+new file mode 100644
+index 0000000..e36b73d
+--- /dev/null
++++ b/arch/avr32/configs/atstk1005_defconfig
+@@ -0,0 +1,1505 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.27.4
++# Fri Nov  7 10:22:27 2008
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++# CONFIG_GROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++CONFIG_RELAY=y
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_COMPAT_BRK is not set
++# CONFIG_BASE_FULL is not set
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++CONFIG_PROFILING=y
++# CONFIG_MARKERS is not set
++CONFIG_OPROFILE=m
++CONFIG_HAVE_OPROFILE=y
++CONFIG_KPROBES=y
++# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
++# CONFIG_HAVE_IOREMAP_PROT is not set
++CONFIG_HAVE_KPROBES=y
++# CONFIG_HAVE_KRETPROBES is not set
++# CONFIG_HAVE_ARCH_TRACEHOOK is not set
++# CONFIG_HAVE_DMA_ATTRS is not set
++# CONFIG_USE_GENERIC_SMP_HELPERS is not set
++CONFIG_HAVE_CLK=y
++CONFIG_PROC_PAGE_MONITOR=y
++# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_AS is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++CONFIG_CLASSIC_RCU=y
++
++#
++# System Type and features
++#
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PORTMUX_GPIO_V2=y
++CONFIG_TIMER_AST=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP720X=y
++CONFIG_CPU_AT32AP7200=y
++CONFIG_BOARD_ATSTK1000=y
++# CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_FAVR_32 is not set
++# CONFIG_BOARD_MIMC200 is not set
++# CONFIG_BOARD_ATSTK1002 is not set
++# CONFIG_BOARD_ATSTK1003 is not set
++# CONFIG_BOARD_ATSTK1004 is not set
++CONFIG_BOARD_ATSTK1005=y
++# CONFIG_BOARD_ATSTK1006 is not set
++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
++# CONFIG_BOARD_ATSTK100X_SPI1 is not set
++CONFIG_BOARD_ATSTK1000_J2_LED=y
++# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
++CONFIG_BOARD_ATSTK1000_J2_RGB=y
++CONFIG_BOARD_ATSTK1000_EXTDAC=y
++CONFIG_LOADER_U_BOOT=y
++
++#
++# Atmel AVR32 AP options
++#
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_QUICKLIST=y
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_NR_QUICK=2
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_NMI_DEBUGGING=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_SCHED_HRTICK=y
++CONFIG_CMDLINE=""
++
++#
++# Power management options
++#
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=m
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_XFRM_IPCOMP=m
++CONFIG_NET_KEY=m
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++CONFIG_NET_IPIP=m
++CONFIG_NET_IPGRE=m
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++CONFIG_INET_TUNNEL=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++CONFIG_IPV6=m
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++# CONFIG_IPV6_MIP6 is not set
++CONFIG_INET6_XFRM_TUNNEL=m
++CONFIG_INET6_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_NDISC_NODETYPE=y
++CONFIG_IPV6_TUNNEL=m
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
++# CONFIG_IPV6_MROUTE is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++CONFIG_STP=m
++CONFIG_BRIDGE=m
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++CONFIG_LLC=m
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_TCPPROBE is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++# CONFIG_MTD_BLOCK is not set
++# CONFIG_MTD_BLOCK_RO is not set
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x8000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=m
++CONFIG_MTD_M25P80=m
++CONFIG_M25PXX_USE_FAST_READ=y
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++CONFIG_MTD_NAND_ECC_SMC=y
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++CONFIG_MTD_NAND_ATMEL=y
++CONFIG_MTD_NAND_ATMEL_ECC_HW=y
++# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
++# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++# CONFIG_MTD_UBI_GLUEBI is not set
++
++#
++# UBI debugging options
++#
++# CONFIG_MTD_UBI_DEBUG is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++CONFIG_BLK_DEV_NBD=m
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=m
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++CONFIG_ATMEL_PWM=m
++# CONFIG_ATMEL_TCLIB is not set
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=m
++# CONFIG_ENCLOSURE_SERVICES is not set
++# CONFIG_HAVE_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_SCSI_PROC_FS is not set
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=m
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++CONFIG_BLK_DEV_SR=m
++# CONFIG_BLK_DEV_SR_VENDOR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++# CONFIG_SCSI_LOWLEVEL is not set
++# CONFIG_SCSI_DH is not set
++CONFIG_ATA=m
++# CONFIG_ATA_NONSTANDARD is not set
++# CONFIG_SATA_PMP is not set
++CONFIG_ATA_SFF=y
++# CONFIG_SATA_MV is not set
++CONFIG_PATA_AT32=m
++# CONFIG_PATA_PLATFORM is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=m
++CONFIG_MACB=y
++# CONFIG_ENC28J60 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_IWLWIFI_LEDS is not set
++
++#
++# USB Network Adapters
++#
++CONFIG_USB_CATC=m
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++CONFIG_USB_USBNET=m
++# CONFIG_USB_NET_AX8817X is not set
++CONFIG_USB_NET_CDCETHER=m
++# CONFIG_USB_NET_DM9601 is not set
++# CONFIG_USB_NET_GL620A is not set
++# CONFIG_USB_NET_NET1080 is not set
++# CONFIG_USB_NET_PLUSB is not set
++# CONFIG_USB_NET_MCS7830 is not set
++# CONFIG_USB_NET_RNDIS_HOST is not set
++CONFIG_USB_NET_CDC_SUBSET=m
++# CONFIG_USB_ALI_M5632 is not set
++# CONFIG_USB_AN2720 is not set
++CONFIG_USB_BELKIN=y
++CONFIG_USB_ARMLINUX=y
++# CONFIG_USB_EPSON2888 is not set
++# CONFIG_USB_KC2190 is not set
++# CONFIG_USB_NET_ZAURUS is not set
++# CONFIG_WAN is not set
++CONFIG_PPP=m
++# CONFIG_PPP_MULTILINK is not set
++# CONFIG_PPP_FILTER is not set
++CONFIG_PPP_ASYNC=m
++# CONFIG_PPP_SYNC_TTY is not set
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++# CONFIG_PPP_MPPE is not set
++# CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++CONFIG_INPUT_POLLDEV=m
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_APPLETOUCH is not set
++# CONFIG_MOUSE_BCM5974 is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++CONFIG_MOUSE_GPIO=m
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_DEVKMEM=y
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_HELPER_AUTO=y
++CONFIG_I2C_ALGOBIT=m
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_SIMTEC is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++CONFIG_I2C_TINY_USB=m
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_AT24 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++# CONFIG_DEBUG_GPIO is not set
++CONFIG_GPIO_SYSFS=y
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_GPIO_PCF857X is not set
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++# CONFIG_THERMAL_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32_WDT=y
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_MFD_TMIO is not set
++
++#
++# Multimedia devices
++#
++
++#
++# Multimedia core support
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_VIDEO_MEDIA is not set
++
++#
++# Multimedia drivers
++#
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_ATMEL_MPOP is not set
++# CONFIG_FB_VIRTUAL is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_LCD_LTV350QV=y
++# CONFIG_LCD_ILI9320 is not set
++# CONFIG_LCD_VGG2432A4 is not set
++# CONFIG_LCD_PLATFORM is not set
++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
++# CONFIG_LOGO is not set
++CONFIG_SOUND=m
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++CONFIG_SND_HWDEP=m
++CONFIG_SND_RAWMIDI=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++# CONFIG_SND_SUPPORT_OLD_API is not set
++# CONFIG_SND_VERBOSE_PROCFS is not set
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++# CONFIG_SND_DRIVERS is not set
++CONFIG_SND_SPI=y
++CONFIG_SND_AT73C213=m
++CONFIG_SND_AT73C213_TARGET_BITRATE=48000
++CONFIG_SND_USB=y
++CONFIG_SND_USB_AUDIO=m
++# CONFIG_SND_USB_CAIAQ is not set
++# CONFIG_SND_SOC is not set
++# CONFIG_SOUND_PRIME is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++CONFIG_USB_HID=y
++# CONFIG_USB_HIDINPUT_POWERBOOK is not set
++# CONFIG_HID_FF is not set
++# CONFIG_USB_HIDDEV is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++# CONFIG_USB_DEVICE_CLASS is not set
++CONFIG_USB_DYNAMIC_MINORS=y
++CONFIG_USB_SUSPEND=y
++# CONFIG_USB_OTG is not set
++# CONFIG_USB_OTG_WHITELIST is not set
++# CONFIG_USB_OTG_BLACKLIST_HUB is not set
++CONFIG_USB_MON=y
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_C67X00_HCD is not set
++CONFIG_USB_EHCI_HCD=y
++# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
++# CONFIG_USB_EHCI_TT_NEWSCHED is not set
++CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
++CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_ISP1760_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
++CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
++# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++# CONFIG_USB_MUSB_HDRC is not set
++# CONFIG_USB_GADGET_MUSB_HDRC is not set
++
++#
++# USB Device Class drivers
++#
++CONFIG_USB_ACM=m
++CONFIG_USB_PRINTER=m
++CONFIG_USB_WDM=m
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=m
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB port drivers
++#
++CONFIG_USB_SERIAL=m
++# CONFIG_USB_EZUSB is not set
++CONFIG_USB_SERIAL_GENERIC=y
++# CONFIG_USB_SERIAL_AIRCABLE is not set
++# CONFIG_USB_SERIAL_ARK3116 is not set
++# CONFIG_USB_SERIAL_BELKIN is not set
++# CONFIG_USB_SERIAL_CH341 is not set
++# CONFIG_USB_SERIAL_WHITEHEAT is not set
++# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
++# CONFIG_USB_SERIAL_CP2101 is not set
++# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
++# CONFIG_USB_SERIAL_EMPEG is not set
++# CONFIG_USB_SERIAL_FTDI_SIO is not set
++# CONFIG_USB_SERIAL_FUNSOFT is not set
++# CONFIG_USB_SERIAL_VISOR is not set
++# CONFIG_USB_SERIAL_IPAQ is not set
++# CONFIG_USB_SERIAL_IR is not set
++# CONFIG_USB_SERIAL_EDGEPORT is not set
++# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
++# CONFIG_USB_SERIAL_GARMIN is not set
++# CONFIG_USB_SERIAL_IPW is not set
++# CONFIG_USB_SERIAL_IUU is not set
++# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
++# CONFIG_USB_SERIAL_KEYSPAN is not set
++# CONFIG_USB_SERIAL_KLSI is not set
++# CONFIG_USB_SERIAL_KOBIL_SCT is not set
++# CONFIG_USB_SERIAL_MCT_U232 is not set
++# CONFIG_USB_SERIAL_MOS7720 is not set
++# CONFIG_USB_SERIAL_MOS7840 is not set
++# CONFIG_USB_SERIAL_MOTOROLA is not set
++# CONFIG_USB_SERIAL_NAVMAN is not set
++CONFIG_USB_SERIAL_PL2303=m
++# CONFIG_USB_SERIAL_OTI6858 is not set
++# CONFIG_USB_SERIAL_SPCP8X5 is not set
++# CONFIG_USB_SERIAL_HP4X is not set
++# CONFIG_USB_SERIAL_SAFE is not set
++# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
++# CONFIG_USB_SERIAL_TI is not set
++# CONFIG_USB_SERIAL_CYBERJACK is not set
++# CONFIG_USB_SERIAL_XIRCOM is not set
++# CONFIG_USB_SERIAL_OPTION is not set
++# CONFIG_USB_SERIAL_OMNINET is not set
++# CONFIG_USB_SERIAL_DEBUG is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_SISUSBVGA is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++CONFIG_USB_TEST=m
++# CONFIG_USB_ISIGHTFW is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++# CONFIG_USB_GADGET_DEBUG_FS is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA25X is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_PXA27X is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_USB_G_PRINTER is not set
++# CONFIG_USB_CDC_COMPOSITE is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++CONFIG_MMC_TEST=m
++
++#
++# MMC/SD Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++CONFIG_MMC_ATMELMCI=y
++# CONFIG_MMC_ATMELMCI_DMA is not set
++CONFIG_MMC_SPI=m
++# CONFIG_MEMSTICK is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=m
++
++#
++# LED drivers
++#
++CONFIG_LEDS_ATMEL_PWM=m
++# CONFIG_LEDS_PCA9532 is not set
++CONFIG_LEDS_GPIO=m
++# CONFIG_LEDS_PCA955X is not set
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=m
++CONFIG_LEDS_TRIGGER_HEARTBEAT=m
++CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++# CONFIG_RTC_DRV_AT32AP700X is not set
++CONFIG_RTC_DRV_AVR32_AST=y
++CONFIG_DMADEVICES=y
++
++#
++# DMA Devices
++#
++CONFIG_ATMEL_PDCA=y
++CONFIG_DW_DMAC=y
++CONFIG_DMA_ENGINE=y
++
++#
++# DMA Clients
++#
++# CONFIG_NET_DMA is not set
++CONFIG_DMATEST=m
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_DNOTIFY is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++CONFIG_FUSE_FS=m
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=y
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_UBIFS_FS=y
++CONFIG_UBIFS_FS_XATTR=y
++CONFIG_UBIFS_FS_ADVANCED_COMPR=y
++CONFIG_UBIFS_FS_LZO=y
++CONFIG_UBIFS_FS_ZLIB=y
++# CONFIG_UBIFS_FS_DEBUG is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++CONFIG_MINIX_FS=m
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++CONFIG_ROOT_NFS=y
++# CONFIG_NFSD is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=m
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=m
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=m
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++# CONFIG_DEBUG_MEMORY_INIT is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++CONFIG_FRAME_POINTER=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_KPROBES_SANITY_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_LKDTM is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_AEAD=m
++CONFIG_CRYPTO_BLKCIPHER=m
++CONFIG_CRYPTO_HASH=m
++CONFIG_CRYPTO_MANAGER=m
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_AUTHENC=m
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
++CONFIG_CRYPTO_CBC=m
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++CONFIG_CRYPTO_HMAC=m
++# CONFIG_CRYPTO_XCBC is not set
++
++#
++# Digest
++#
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=m
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
++CONFIG_CRYPTO_SHA1=m
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_WP512 is not set
++
++#
++# Ciphers
++#
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++CONFIG_CRYPTO_DES=m
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++
++#
++# Compression
++#
++CONFIG_CRYPTO_DEFLATE=y
++CONFIG_CRYPTO_LZO=y
++# CONFIG_CRYPTO_HW is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_GENERIC_FIND_FIRST_BIT is not set
++# CONFIG_GENERIC_FIND_NEXT_BIT is not set
++CONFIG_CRC_CCITT=m
++CONFIG_CRC16=y
++# CONFIG_CRC_T10DIF is not set
++CONFIG_CRC_ITU_T=m
++CONFIG_CRC32=y
++CONFIG_CRC7=m
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_LZO_COMPRESS=y
++CONFIG_LZO_DECOMPRESS=y
++CONFIG_GENERIC_ALLOCATOR=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig
+index 8b6e54c..cee2884 100644
+--- a/arch/avr32/configs/atstk1006_defconfig
++++ b/arch/avr32/configs/atstk1006_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.27-rc1
+-# Tue Aug  5 15:40:26 2008
++# Linux kernel version: 2.6.27.4
++# Fri Nov  7 10:25:15 2008
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+@@ -129,20 +129,24 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PORTMUX_PIO=y
+ CONFIG_PLATFORM_AT32AP=y
+ CONFIG_CPU_AT32AP700X=y
+ CONFIG_CPU_AT32AP7000=y
+ CONFIG_BOARD_ATSTK1000=y
+ # CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_FAVR_32 is not set
++# CONFIG_BOARD_MIMC200 is not set
+ # CONFIG_BOARD_ATSTK1002 is not set
+ # CONFIG_BOARD_ATSTK1003 is not set
+ # CONFIG_BOARD_ATSTK1004 is not set
++# CONFIG_BOARD_ATSTK1005 is not set
+ CONFIG_BOARD_ATSTK1006=y
+ # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
+ # CONFIG_BOARD_ATSTK100X_SPI1 is not set
+-# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++CONFIG_BOARD_ATSTK1000_J2_LED=y
+ # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
+-# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
++CONFIG_BOARD_ATSTK1000_J2_RGB=y
+ CONFIG_BOARD_ATSTK1000_EXTDAC=y
+ CONFIG_LOADER_U_BOOT=y
+ 
+@@ -186,7 +190,7 @@ CONFIG_HZ_250=y
+ # CONFIG_HZ_300 is not set
+ # CONFIG_HZ_1000 is not set
+ CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
++CONFIG_SCHED_HRTICK=y
+ CONFIG_CMDLINE=""
+ 
+ #
+@@ -360,7 +364,8 @@ CONFIG_MTD_CMDLINE_PARTS=y
+ #
+ CONFIG_MTD_CHAR=y
+ CONFIG_MTD_BLKDEVS=y
+-CONFIG_MTD_BLOCK=y
++# CONFIG_MTD_BLOCK is not set
++# CONFIG_MTD_BLOCK_RO is not set
+ # CONFIG_FTL is not set
+ # CONFIG_NFTL is not set
+ # CONFIG_INFTL is not set
+@@ -422,7 +427,7 @@ CONFIG_M25PXX_USE_FAST_READ=y
+ # CONFIG_MTD_DOC2001PLUS is not set
+ CONFIG_MTD_NAND=y
+ # CONFIG_MTD_NAND_VERIFY_WRITE is not set
+-# CONFIG_MTD_NAND_ECC_SMC is not set
++CONFIG_MTD_NAND_ECC_SMC=y
+ # CONFIG_MTD_NAND_MUSEUM_IDS is not set
+ CONFIG_MTD_NAND_IDS=y
+ # CONFIG_MTD_NAND_DISKONCHIP is not set
+@@ -521,7 +526,7 @@ CONFIG_NETDEVICES=y
+ # CONFIG_BONDING is not set
+ # CONFIG_MACVLAN is not set
+ # CONFIG_EQUALIZER is not set
+-CONFIG_TUN=m
++# CONFIG_TUN is not set
+ # CONFIG_VETH is not set
+ CONFIG_PHYLIB=y
+ 
+@@ -580,7 +585,7 @@ CONFIG_SLHC=m
+ #
+ # Input device support
+ #
+-CONFIG_INPUT=m
++CONFIG_INPUT=y
+ # CONFIG_INPUT_FF_MEMLESS is not set
+ CONFIG_INPUT_POLLDEV=m
+ 
+@@ -609,6 +614,8 @@ CONFIG_KEYBOARD_GPIO=m
+ CONFIG_INPUT_MOUSE=y
+ # CONFIG_MOUSE_PS2 is not set
+ # CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_APPLETOUCH is not set
++# CONFIG_MOUSE_BCM5974 is not set
+ # CONFIG_MOUSE_VSXXXAA is not set
+ CONFIG_MOUSE_GPIO=m
+ # CONFIG_INPUT_JOYSTICK is not set
+@@ -625,8 +632,12 @@ CONFIG_MOUSE_GPIO=m
+ #
+ # Character devices
+ #
+-# CONFIG_VT is not set
+-# CONFIG_DEVKMEM is not set
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_DEVKMEM=y
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ 
+ #
+@@ -653,6 +664,7 @@ CONFIG_UNIX98_PTYS=y
+ CONFIG_I2C=m
+ CONFIG_I2C_BOARDINFO=y
+ CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_HELPER_AUTO=y
+ CONFIG_I2C_ALGOBIT=m
+ 
+ #
+@@ -702,6 +714,7 @@ CONFIG_SPI_MASTER=y
+ #
+ # SPI Master Controller Drivers
+ #
++CONFIG_SPI_ATMEL_HAVE_PDC=y
+ CONFIG_SPI_ATMEL=y
+ # CONFIG_SPI_BITBANG is not set
+ 
+@@ -744,7 +757,7 @@ CONFIG_WATCHDOG=y
+ # Watchdog Device Drivers
+ #
+ # CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_AT32AP700X_WDT=y
++CONFIG_AT32_WDT=y
+ 
+ #
+ # Sonics Silicon Backplane
+@@ -758,6 +771,7 @@ CONFIG_SSB_POSSIBLE=y
+ # CONFIG_MFD_CORE is not set
+ # CONFIG_MFD_SM501 is not set
+ # CONFIG_HTC_PASIC3 is not set
++# CONFIG_MFD_TMIO is not set
+ 
+ #
+ # Multimedia devices
+@@ -803,6 +817,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
+ #
+ # CONFIG_FB_S1D13XXX is not set
+ CONFIG_FB_ATMEL=y
++# CONFIG_FB_ATMEL_MPOP is not set
+ # CONFIG_FB_VIRTUAL is not set
+ CONFIG_BACKLIGHT_LCD_SUPPORT=y
+ CONFIG_LCD_CLASS_DEVICE=y
+@@ -816,6 +831,12 @@ CONFIG_LCD_LTV350QV=y
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
+ # CONFIG_LOGO is not set
+ CONFIG_SOUND=m
+ CONFIG_SND=m
+@@ -831,11 +852,7 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
+ # CONFIG_SND_VERBOSE_PROCFS is not set
+ # CONFIG_SND_VERBOSE_PRINTK is not set
+ # CONFIG_SND_DEBUG is not set
+-CONFIG_SND_DRIVERS=y
+-# CONFIG_SND_DUMMY is not set
+-# CONFIG_SND_MTPAV is not set
+-# CONFIG_SND_SERIAL_U16550 is not set
+-# CONFIG_SND_MPU401 is not set
++# CONFIG_SND_DRIVERS is not set
+ CONFIG_SND_SPI=y
+ CONFIG_SND_AT73C213=m
+ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+@@ -843,11 +860,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+ # CONFIG_SOUND_PRIME is not set
+ # CONFIG_HID_SUPPORT is not set
+ CONFIG_USB_SUPPORT=y
+-# CONFIG_USB_ARCH_HAS_HCD is not set
+-# CONFIG_USB_ARCH_HAS_OHCI is not set
+-# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
+ # CONFIG_USB_OTG_WHITELIST is not set
+ # CONFIG_USB_OTG_BLACKLIST_HUB is not set
++# CONFIG_USB_MUSB_HDRC is not set
++# CONFIG_USB_GADGET_MUSB_HDRC is not set
+ 
+ #
+ # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+@@ -881,7 +901,7 @@ CONFIG_USB_FILE_STORAGE=m
+ CONFIG_USB_G_SERIAL=m
+ # CONFIG_USB_MIDI_GADGET is not set
+ # CONFIG_USB_G_PRINTER is not set
+-# CONFIG_USB_CDC_COMPOSITE is not set
++CONFIG_USB_CDC_COMPOSITE=m
+ CONFIG_MMC=y
+ # CONFIG_MMC_DEBUG is not set
+ # CONFIG_MMC_UNSAFE_RESUME is not set
+@@ -899,6 +919,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
+ #
+ # CONFIG_MMC_SDHCI is not set
+ CONFIG_MMC_ATMELMCI=y
++# CONFIG_MMC_ATMELMCI_DMA is not set
+ CONFIG_MMC_SPI=m
+ # CONFIG_MEMSTICK is not set
+ CONFIG_NEW_LEDS=y
+@@ -975,11 +996,13 @@ CONFIG_RTC_INTF_DEV=y
+ # on-CPU RTC drivers
+ #
+ CONFIG_RTC_DRV_AT32AP700X=y
++# CONFIG_RTC_DRV_AVR32_AST is not set
+ CONFIG_DMADEVICES=y
+ 
+ #
+ # DMA Devices
+ #
++# CONFIG_ATMEL_PDCA is not set
+ CONFIG_DW_DMAC=y
+ CONFIG_DMA_ENGINE=y
+ 
+@@ -993,13 +1016,13 @@ CONFIG_DMATEST=m
+ #
+ # File systems
+ #
+-CONFIG_EXT2_FS=m
++CONFIG_EXT2_FS=y
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=m
++CONFIG_EXT3_FS=y
+ # CONFIG_EXT3_FS_XATTR is not set
+ # CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=m
++CONFIG_JBD=y
+ # CONFIG_JBD_DEBUG is not set
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+@@ -1040,7 +1063,7 @@ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
++CONFIG_CONFIGFS_FS=y
+ 
+ #
+ # Miscellaneous filesystems
+@@ -1054,7 +1077,8 @@ CONFIG_TMPFS=y
+ # CONFIG_EFS_FS is not set
+ CONFIG_JFFS2_FS=y
+ CONFIG_JFFS2_FS_DEBUG=0
+-# CONFIG_JFFS2_FS_WRITEBUFFER is not set
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+ # CONFIG_JFFS2_SUMMARY is not set
+ # CONFIG_JFFS2_FS_XATTR is not set
+ # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig
+new file mode 100644
+index 0000000..e2bd998
+--- /dev/null
++++ b/arch/avr32/configs/favr-32_defconfig
+@@ -0,0 +1,1235 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.27-rc8
++# Tue Oct 14 13:20:41 2008
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++# CONFIG_GROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++CONFIG_RELAY=y
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_COMPAT_BRK is not set
++# CONFIG_BASE_FULL is not set
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++CONFIG_PROFILING=y
++# CONFIG_MARKERS is not set
++CONFIG_OPROFILE=m
++CONFIG_HAVE_OPROFILE=y
++CONFIG_KPROBES=y
++# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
++# CONFIG_HAVE_IOREMAP_PROT is not set
++CONFIG_HAVE_KPROBES=y
++# CONFIG_HAVE_KRETPROBES is not set
++# CONFIG_HAVE_ARCH_TRACEHOOK is not set
++# CONFIG_HAVE_DMA_ATTRS is not set
++# CONFIG_USE_GENERIC_SMP_HELPERS is not set
++CONFIG_HAVE_CLK=y
++CONFIG_PROC_PAGE_MONITOR=y
++# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_AS is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++CONFIG_CLASSIC_RCU=y
++
++#
++# System Type and features
++#
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
++CONFIG_CPU_AT32AP7000=y
++# CONFIG_BOARD_ATSTK1000 is not set
++# CONFIG_BOARD_ATNGW100 is not set
++CONFIG_BOARD_FAVR_32=y
++# CONFIG_BOARD_MIMC200 is not set
++CONFIG_BOARD_FAVR32_ABDAC_RATE=44100
++CONFIG_LOADER_U_BOOT=y
++
++#
++# Atmel AVR32 AP options
++#
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_QUICKLIST=y
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_NR_QUICK=2
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_NMI_DEBUGGING=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_SCHED_HRTICK=y
++CONFIG_CMDLINE=""
++
++#
++# Power management options
++#
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=m
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_XFRM_IPCOMP=m
++CONFIG_NET_KEY=m
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++CONFIG_NET_IPIP=m
++CONFIG_NET_IPGRE=m
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++CONFIG_INET_TUNNEL=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++CONFIG_IPV6=y
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++# CONFIG_IPV6_MIP6 is not set
++CONFIG_INET6_XFRM_TUNNEL=m
++CONFIG_INET6_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_NDISC_NODETYPE=y
++CONFIG_IPV6_TUNNEL=m
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
++# CONFIG_IPV6_MROUTE is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++CONFIG_STP=m
++CONFIG_BRIDGE=m
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++CONFIG_LLC=m
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_TCPPROBE is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x8000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=m
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++CONFIG_ATMEL_PWM=m
++CONFIG_ATMEL_TCLIB=y
++CONFIG_ATMEL_TCB_CLKSRC=y
++CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=m
++# CONFIG_ENCLOSURE_SERVICES is not set
++# CONFIG_HAVE_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++CONFIG_MACB=y
++# CONFIG_ENC28J60 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_IWLWIFI_LEDS is not set
++# CONFIG_WAN is not set
++CONFIG_PPP=m
++# CONFIG_PPP_MULTILINK is not set
++# CONFIG_PPP_FILTER is not set
++CONFIG_PPP_ASYNC=m
++# CONFIG_PPP_SYNC_TTY is not set
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++# CONFIG_PPP_MPPE is not set
++# CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++CONFIG_INPUT_POLLDEV=m
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++CONFIG_MOUSE_GPIO=m
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_ADS7846=m
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_INEXIO is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++# CONFIG_TOUCHSCREEN_UCB1400 is not set
++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++# CONFIG_CONSOLE_TRANSLATIONS is not set
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_DEVKMEM is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_HELPER_AUTO=y
++CONFIG_I2C_ALGOBIT=m
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_SIMTEC is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_AT24 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++# CONFIG_DEBUG_GPIO is not set
++CONFIG_GPIO_SYSFS=y
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_GPIO_PCF857X is not set
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++# CONFIG_THERMAL_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_MFD_TMIO is not set
++
++#
++# Multimedia devices
++#
++
++#
++# Multimedia core support
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_VIDEO_MEDIA is not set
++
++#
++# Multimedia drivers
++#
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_VIRTUAL is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++# CONFIG_LCD_CLASS_DEVICE is not set
++CONFIG_BACKLIGHT_CLASS_DEVICE=m
++# CONFIG_BACKLIGHT_ATMEL_LCDC is not set
++CONFIG_BACKLIGHT_ATMEL_PWM=m
++# CONFIG_BACKLIGHT_CORGI is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
++# CONFIG_LOGO is not set
++CONFIG_SOUND=m
++# CONFIG_SND is not set
++CONFIG_SOUND_PRIME=m
++# CONFIG_HID_SUPPORT is not set
++CONFIG_USB_SUPPORT=y
++# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++# CONFIG_USB_OTG_WHITELIST is not set
++# CONFIG_USB_OTG_BLACKLIST_HUB is not set
++# CONFIG_USB_MUSB_HDRC is not set
++# CONFIG_USB_GADGET_MUSB_HDRC is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++# CONFIG_USB_GADGET_DEBUG_FS is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA25X is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_PXA27X is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_USB_G_PRINTER is not set
++CONFIG_USB_CDC_COMPOSITE=m
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++CONFIG_MMC_ATMELMCI=y
++CONFIG_MMC_ATMELMCI_DMA=y
++# CONFIG_MMC_SPI is not set
++# CONFIG_MEMSTICK is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++CONFIG_LEDS_ATMEL_PWM=m
++# CONFIG_LEDS_PCA9532 is not set
++CONFIG_LEDS_GPIO=y
++# CONFIG_LEDS_PCA955X is not set
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
++CONFIG_DMADEVICES=y
++
++#
++# DMA Devices
++#
++CONFIG_DW_DMAC=y
++CONFIG_DMA_ENGINE=y
++
++#
++# DMA Clients
++#
++# CONFIG_NET_DMA is not set
++# CONFIG_DMATEST is not set
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_DNOTIFY is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++CONFIG_FUSE_FS=m
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=y
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++# CONFIG_JFFS2_FS_WRITEBUFFER is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++CONFIG_ROOT_NFS=y
++# CONFIG_NFSD is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=m
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=m
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=m
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++# CONFIG_DEBUG_MEMORY_INIT is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++CONFIG_FRAME_POINTER=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_KPROBES_SANITY_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_LKDTM is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++CONFIG_CRYPTO_ALGAPI=m
++CONFIG_CRYPTO_AEAD=m
++CONFIG_CRYPTO_BLKCIPHER=m
++CONFIG_CRYPTO_HASH=m
++CONFIG_CRYPTO_MANAGER=m
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_AUTHENC=m
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
++CONFIG_CRYPTO_CBC=m
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++CONFIG_CRYPTO_HMAC=m
++# CONFIG_CRYPTO_XCBC is not set
++
++#
++# Digest
++#
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=m
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
++CONFIG_CRYPTO_SHA1=m
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_WP512 is not set
++
++#
++# Ciphers
++#
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++CONFIG_CRYPTO_DES=m
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++
++#
++# Compression
++#
++CONFIG_CRYPTO_DEFLATE=m
++# CONFIG_CRYPTO_LZO is not set
++# CONFIG_CRYPTO_HW is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_GENERIC_FIND_FIRST_BIT is not set
++# CONFIG_GENERIC_FIND_NEXT_BIT is not set
++CONFIG_CRC_CCITT=m
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_T10DIF is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_GENERIC_ALLOCATOR=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff --git a/arch/avr32/configs/mimc200_defconfig b/arch/avr32/configs/mimc200_defconfig
+new file mode 100644
+index 0000000..981e4f8
+--- /dev/null
++++ b/arch/avr32/configs/mimc200_defconfig
+@@ -0,0 +1,1109 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.27-rc8
++# Mon Oct 13 15:46:53 2008
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++# CONFIG_GROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_COMPAT_BRK is not set
++# CONFIG_BASE_FULL is not set
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++CONFIG_PROFILING=y
++# CONFIG_MARKERS is not set
++# CONFIG_OPROFILE is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
++# CONFIG_HAVE_IOREMAP_PROT is not set
++CONFIG_HAVE_KPROBES=y
++# CONFIG_HAVE_KRETPROBES is not set
++# CONFIG_HAVE_ARCH_TRACEHOOK is not set
++# CONFIG_HAVE_DMA_ATTRS is not set
++# CONFIG_USE_GENERIC_SMP_HELPERS is not set
++CONFIG_HAVE_CLK=y
++CONFIG_PROC_PAGE_MONITOR=y
++# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++# CONFIG_MODULES is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_AS is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++CONFIG_CLASSIC_RCU=y
++
++#
++# System Type and features
++#
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
++CONFIG_CPU_AT32AP7000=y
++# CONFIG_BOARD_ATSTK1000 is not set
++# CONFIG_BOARD_ATNGW100 is not set
++CONFIG_BOARD_MIMC200=y
++CONFIG_LOADER_U_BOOT=y
++
++#
++# Atmel AVR32 AP options
++#
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_QUICKLIST=y
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_NR_QUICK=2
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_NMI_DEBUGGING=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_SCHED_HRTICK=y
++CONFIG_CMDLINE=""
++
++#
++# Power management options
++#
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=y
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_XFRM_IPCOMP=y
++CONFIG_NET_KEY=y
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_ASK_IP_FIB_HASH=y
++# CONFIG_IP_FIB_TRIE is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_MULTIPLE_TABLES is not set
++# CONFIG_IP_ROUTE_MULTIPATH is not set
++# CONFIG_IP_ROUTE_VERBOSE is not set
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++CONFIG_IP_MROUTE=y
++CONFIG_IP_PIMSM_V1=y
++# CONFIG_IP_PIMSM_V2 is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++CONFIG_INET_AH=y
++CONFIG_INET_ESP=y
++CONFIG_INET_IPCOMP=y
++CONFIG_INET_XFRM_TUNNEL=y
++CONFIG_INET_TUNNEL=y
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++CONFIG_IPV6=y
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=y
++CONFIG_INET6_ESP=y
++CONFIG_INET6_IPCOMP=y
++# CONFIG_IPV6_MIP6 is not set
++CONFIG_INET6_XFRM_TUNNEL=y
++CONFIG_INET6_TUNNEL=y
++CONFIG_INET6_XFRM_MODE_TRANSPORT=y
++CONFIG_INET6_XFRM_MODE_TUNNEL=y
++CONFIG_INET6_XFRM_MODE_BEET=y
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=y
++CONFIG_IPV6_NDISC_NODETYPE=y
++# CONFIG_IPV6_TUNNEL is not set
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
++# CONFIG_IPV6_MROUTE is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x80000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=y
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_RAM is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_ATMEL_PWM is not set
++CONFIG_ATMEL_TCLIB=y
++CONFIG_ATMEL_TCB_CLKSRC=y
++CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_ATMEL_SSC is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++# CONFIG_HAVE_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++CONFIG_MACB=y
++# CONFIG_ENC28J60 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_IWLWIFI_LEDS is not set
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_DEVKMEM is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_HELPER_AUTO=y
++CONFIG_I2C_ALGOBIT=y
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++CONFIG_I2C_GPIO=y
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_SIMTEC is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_PCA_PLATFORM is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++CONFIG_AT24=y
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_DS28CM00 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++CONFIG_SPI_AT25=y
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++# CONFIG_DEBUG_GPIO is not set
++CONFIG_GPIO_SYSFS=y
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_GPIO_PCF857X is not set
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++# CONFIG_THERMAL_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_MFD_TMIO is not set
++
++#
++# Multimedia devices
++#
++
++#
++# Multimedia core support
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_VIDEO_MEDIA is not set
++
++#
++# Multimedia drivers
++#
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++# CONFIG_LOGO is not set
++# CONFIG_SOUND is not set
++# CONFIG_USB_SUPPORT is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++CONFIG_MMC_TEST=y
++
++#
++# MMC/SD Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++CONFIG_MMC_ATMELMCI=y
++# CONFIG_MMC_ATMELMCI_DMA is not set
++CONFIG_MMC_SPI=y
++# CONFIG_MEMSTICK is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++CONFIG_LEDS_GPIO=y
++# CONFIG_LEDS_PCA955X is not set
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++CONFIG_RTC_DRV_DS1390=y
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++# CONFIG_RTC_DRV_AT32AP700X is not set
++CONFIG_DMADEVICES=y
++
++#
++# DMA Devices
++#
++CONFIG_DW_DMAC=y
++CONFIG_DMA_ENGINE=y
++
++#
++# DMA Clients
++#
++# CONFIG_NET_DMA is not set
++# CONFIG_DMATEST is not set
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_DNOTIFY is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=850
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++# CONFIG_PROC_KCORE is not set
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=y
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++CONFIG_ROOT_NFS=y
++# CONFIG_NFSD is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=y
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++# CONFIG_DEBUG_MEMORY_INIT is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++CONFIG_FRAME_POINTER=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_AEAD=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_AUTHENC=y
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
++CONFIG_CRYPTO_CBC=y
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++CONFIG_CRYPTO_ECB=y
++# CONFIG_CRYPTO_LRW is not set
++CONFIG_CRYPTO_PCBC=y
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++CONFIG_CRYPTO_HMAC=y
++# CONFIG_CRYPTO_XCBC is not set
++
++#
++# Digest
++#
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
++CONFIG_CRYPTO_SHA1=y
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_WP512 is not set
++
++#
++# Ciphers
++#
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++CONFIG_CRYPTO_ARC4=y
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++
++#
++# Compression
++#
++CONFIG_CRYPTO_DEFLATE=y
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_GENERIC_FIND_FIRST_BIT is not set
++# CONFIG_GENERIC_FIND_NEXT_BIT is not set
++CONFIG_CRC_CCITT=y
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_T10DIF is not set
++CONFIG_CRC_ITU_T=y
++CONFIG_CRC32=y
++CONFIG_CRC7=y
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_GENERIC_ALLOCATOR=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff --git a/arch/avr32/include/asm/ast_regs.h b/arch/avr32/include/asm/ast_regs.h
+new file mode 100644
+index 0000000..2e2cfb9
+--- /dev/null
++++ b/arch/avr32/include/asm/ast_regs.h
+@@ -0,0 +1,88 @@
++/*
++ * Register definitions for the Asynchronous Timer (AST)
++ *
++ * Copyright (C) 2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __AST_REGS_H__
++#define __AST_REGS_H__
++
++/* Control Register */
++#define AST_CR				0x0000
++# define AST_CR_EN_BIT			0	/* Enable */
++# define AST_CR_PCLR_BIT		1	/* Prescaler Clear */
++# define AST_CR_CA0_BIT			8	/* Clear on Alarm */
++# define AST_CR_CA1_BIT			9
++# define AST_CR_PSEL_START		16	/* Prescale Select */
++# define AST_CR_PSEL_SIZE		4
++
++/* Counter Value */
++#define AST_CV				0x0004
++
++/* Status, Status Clear, Interrupt Enable/Disable/Mask, Wake Enable */
++#define AST_SR				0x0008
++#define AST_SCR				0x000c
++#define AST_IER				0x0010
++#define AST_IDR				0x0014
++#define AST_IMR				0x0018
++#define AST_WER				0x001c
++# define AST_OVF_BIT			0	/* Overflow */
++# define AST_ALARM0_BIT			8	/* Alarm event */
++# define AST_ALARM1_BIT			9
++# define AST_PER0_BIT			16	/* Periodic event */
++# define AST_PER1_BIT			17
++# define AST_BUSY_BIT			24	/* AST busy */
++# define AST_READY_BIT			25	/* BUSY 1 -> 0 event */
++# define AST_CLK_BUSY_BIT		28	/* CLOCK busy */
++# define AST_CLK_READY_BIT		29	/* CKL_BUSY 1 -> 0 event */
++
++/* Alarm registers */
++#define AST_AR0				0x0020
++#define AST_AR1				0x0024
++
++/* Periodic Interval registers */
++#define AST_PIR0			0x0030
++#define AST_PIR1			0x0034
++# define AST_PIRx_INSEL_START		0	/* Interval select */
++# define AST_PIRx_INSEL_SIZE		4
++
++/* Clock Select register */
++#define AST_CLOCK			0x0040
++# define AST_CLOCK_CEN_BIT		0	/* Clock Enable */
++# define AST_CLOCK_CSSEL_START		8	/* Clock Source */
++# define AST_CLOCK_CSSEL_SIZE		2
++#  define AST_CLOCK_SLOW		0	/* RC oscillator */
++#  define AST_CLOCK_OSC32		1	/* 32 kHz oscillator */
++#  define AST_CLOCK_PB			2	/* Peripheral Bus clock */
++#  define AST_CLOCK_GC			3	/* Generic clock */
++
++/* Version register */
++#define AST_VERSION			0x00fc
++
++/* Bit manipulation macros */
++#define AST_BIT(name)						\
++	(1 << AST_##name##_BIT)
++#define AST_BF(name,value)					\
++	(((value) & ((1 << AST_##name##_SIZE) - 1))		\
++	 << AST_##name##_START)
++#define AST_BFEXT(name,value)					\
++	(((value) >> AST_##name##_START)			\
++	 & ((1 << AST_##name##_SIZE) - 1))
++#define AST_BFINS(name,value,old)				\
++	(((old) & ~(((1 << AST_##name##_SIZE) - 1)		\
++		    << AST_##name##_START))			\
++	 | AST_BF(name,value))
++
++/* Register access macros */
++#define ast_readl(base, reg)					\
++	__raw_readl(base + AST_##reg)
++#define ast_writel(base, reg, value)				\
++	__raw_writel(value, base + AST_##reg)
++
++struct platform_device;
++void ast_time_init(struct platform_device *pdev, unsigned int clksel);
++
++#endif /* __AST_REGS_H__ */
+diff --git a/arch/avr32/include/asm/atmel-mci.h b/arch/avr32/include/asm/atmel-mci.h
+index c2ea6e1..59f3fad 100644
+--- a/arch/avr32/include/asm/atmel-mci.h
++++ b/arch/avr32/include/asm/atmel-mci.h
+@@ -1,9 +1,39 @@
+ #ifndef __ASM_AVR32_ATMEL_MCI_H
+ #define __ASM_AVR32_ATMEL_MCI_H
+ 
+-struct mci_platform_data {
++#define ATMEL_MCI_MAX_NR_SLOTS	2
++
++struct dma_slave;
++
++/**
++ * struct mci_slot_pdata - board-specific per-slot configuration
++ * @bus_width: Number of data lines wired up the slot
++ * @detect_pin: GPIO pin wired to the card detect switch
++ * @wp_pin: GPIO pin wired to the write protect sensor
++ *
++ * If a given slot is not present on the board, @bus_width should be
++ * set to 0. The other fields are ignored in this case.
++ *
++ * Any pins that aren't available should be set to a negative value.
++ *
++ * Note that support for multiple slots is experimental -- some cards
++ * might get upset if we don't get the clock management exactly right.
++ * But in most cases, it should work just fine.
++ */
++struct mci_slot_pdata {
++	unsigned int		bus_width;
+ 	int			detect_pin;
+ 	int			wp_pin;
+ };
+ 
++/**
++ * struct mci_platform_data - board-specific MMC/SDcard configuration
++ * @dma_slave: DMA slave interface to use in data transfers, or NULL.
++ * @slot: Per-slot configuration data.
++ */
++struct mci_platform_data {
++	struct dma_slave	*dma_slave;
++	struct mci_slot_pdata	slot[ATMEL_MCI_MAX_NR_SLOTS];
++};
++
+ #endif /* __ASM_AVR32_ATMEL_MCI_H */
+diff --git a/arch/avr32/include/asm/byteorder.h b/arch/avr32/include/asm/byteorder.h
+index d77b48b..8e3af02 100644
+--- a/arch/avr32/include/asm/byteorder.h
++++ b/arch/avr32/include/asm/byteorder.h
+@@ -7,6 +7,9 @@
+ #include <asm/types.h>
+ #include <linux/compiler.h>
+ 
++#define __BIG_ENDIAN
++#define __SWAB_64_THRU_32__
++
+ #ifdef __CHECKER__
+ extern unsigned long __builtin_bswap_32(unsigned long x);
+ extern unsigned short __builtin_bswap_16(unsigned short x);
+@@ -17,15 +20,18 @@ extern unsigned short __builtin_bswap_16(unsigned short x);
+  * the result.
+  */
+ #if !(__GNUC__ == 4 && __GNUC_MINOR__ < 2)
+-#define __arch__swab32(x) __builtin_bswap_32(x)
+-#define __arch__swab16(x) __builtin_bswap_16(x)
+-#endif
++static inline __attribute_const__ __u16 __arch_swab16(__u16 val)
++{
++	return __builtin_bswap_16(val);
++}
++#define __arch_swab16 __arch_swab16
+ 
+-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+-# define __BYTEORDER_HAS_U64__
+-# define __SWAB_64_THRU_32__
++static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
++{
++	return __builtin_bswap_32(val);
++}
++#define __arch_swab32 __arch_swab32
+ #endif
+ 
+-#include <linux/byteorder/big_endian.h>
+-
++#include <linux/byteorder.h>
+ #endif /* __ASM_AVR32_BYTEORDER_H */
+diff --git a/arch/avr32/include/asm/io.h b/arch/avr32/include/asm/io.h
+index a520f77..22c97ef 100644
+--- a/arch/avr32/include/asm/io.h
++++ b/arch/avr32/include/asm/io.h
+@@ -160,6 +160,14 @@ BUILDIO_IOPORT(l, u32)
+ #define readw_relaxed			readw
+ #define readl_relaxed			readl
+ 
++#define readb_be			__raw_readb
++#define readw_be			__raw_readw
++#define readl_be			__raw_readl
++
++#define writeb_be			__raw_writeb
++#define writew_be			__raw_writew
++#define writel_be			__raw_writel
++
+ #define __BUILD_MEMORY_STRING(bwl, type)				\
+ static inline void writes##bwl(volatile void __iomem *addr,		\
+ 			       const void *data, unsigned int count)	\
+diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c
+index e84faff..f2c0cb1 100644
+--- a/arch/avr32/kernel/cpu.c
++++ b/arch/avr32/kernel/cpu.c
+@@ -208,6 +208,7 @@ struct chip_id_map {
+ 
+ static const struct chip_id_map chip_names[] = {
+ 	{ .mid = 0x1f, .pn = 0x1e82, .name = "AT32AP700x" },
++	{ .mid = 0x1f, .pn = 0x1e83, .name = "AT32AP720x" },
+ };
+ #define NR_CHIP_NAMES ARRAY_SIZE(chip_names)
+ 
+diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
+index 33d4937..921da60 100644
+--- a/arch/avr32/kernel/entry-avr32b.S
++++ b/arch/avr32/kernel/entry-avr32b.S
+@@ -112,7 +112,9 @@ pgtbl_lookup:
+ 
+ 	/* Second level lookup */
+ 	ld.w	r2, r3[r1 << 2]
++#ifdef CONFIG_CPU_AT32AP700X
+ 	mfsr	r0, SYSREG_TLBARLO
++#endif
+ 	bld	r2, _PAGE_BIT_PRESENT
+ 	brcc	page_not_present
+ 
+@@ -124,6 +126,8 @@ pgtbl_lookup:
+ 	andl	r2, _PAGE_FLAGS_HARDWARE_MASK & 0xffff
+ 	mtsr	SYSREG_TLBELO, r2
+ 
++	/* Later CPUs do this algorithm in hardware */
++#ifdef CONFIG_CPU_AT32AP700X
+ 	/* Figure out which entry we want to replace */
+ 	mfsr	r1, SYSREG_MMUCR
+ 	clz	r2, r0
+@@ -134,6 +138,7 @@ pgtbl_lookup:
+ 
+ 1:	bfins	r1, r2, SYSREG_DRP_OFFSET, SYSREG_DRP_SIZE
+ 	mtsr	SYSREG_MMUCR, r1
++#endif /* CONFIG_CPU_AT32AP700X */
+ 	tlbw
+ 
+ 	tlbmiss_restore
+@@ -751,8 +756,10 @@ irq_level\level:
+ 
+ 	lddsp	r4, sp[REG_SR]
+ 	bfextu	r4, r4, SYSREG_M0_OFFSET, 3
++#ifdef CONFIG_CPU_AT32AP700X
+ 	cp.w	r4, MODE_SUPERVISOR >> SYSREG_M0_OFFSET
+ 	breq	2f
++#endif
+ 	cp.w	r4, MODE_USER >> SYSREG_M0_OFFSET
+ #ifdef CONFIG_PREEMPT
+ 	brne	3f
+@@ -786,6 +793,7 @@ irq_level\level:
+ 	rete
+ #endif
+ 
++#ifdef CONFIG_CPU_AT32AP700X
+ 2:	get_thread_info	r0
+ 	ld.w	r1, r0[TI_flags]
+ 	bld	r1, TIF_CPU_GOING_TO_SLEEP
+@@ -796,6 +804,7 @@ irq_level\level:
+ #endif
+ 	sub	r1, pc, . - cpu_idle_skip_sleep
+ 	stdsp	sp[REG_PC], r1
++#endif
+ #ifdef CONFIG_PREEMPT
+ 3:	get_thread_info r0
+ 	ld.w	r2, r0[TI_preempt_count]
+diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
+index 2c08ac9..134d530 100644
+--- a/arch/avr32/kernel/process.c
++++ b/arch/avr32/kernel/process.c
+@@ -9,6 +9,7 @@
+ #include <linux/module.h>
+ #include <linux/kallsyms.h>
+ #include <linux/fs.h>
++#include <linux/pm.h>
+ #include <linux/ptrace.h>
+ #include <linux/reboot.h>
+ #include <linux/tick.h>
+@@ -20,7 +21,7 @@
+ 
+ #include <mach/pm.h>
+ 
+-void (*pm_power_off)(void) = NULL;
++void (*pm_power_off)(void);
+ EXPORT_SYMBOL(pm_power_off);
+ 
+ /*
+diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
+index d8e623c..5c70839 100644
+--- a/arch/avr32/kernel/setup.c
++++ b/arch/avr32/kernel/setup.c
+@@ -283,6 +283,25 @@ static int __init early_parse_fbmem(char *p)
+ }
+ early_param("fbmem", early_parse_fbmem);
+ 
++/*
++ * Pick out the memory size.  We look for mem=size@start,
++ * where start and size are "size[KkMmGg]"
++ */
++static int __init early_mem(char *p)
++{
++	resource_size_t size, start;
++
++	start = system_ram->start;
++	size  = memparse(p, &p);
++	if (*p == '@')
++		start = memparse(p + 1, &p);
++
++	system_ram->start = start;
++	system_ram->end = system_ram->start + size - 1;
++	return 0;
++}
++early_param("mem", early_mem);
++
+ static int __init parse_tag_core(struct tag *tag)
+ {
+ 	if (tag->hdr.size > 2) {
+diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
+index 283481d..09dfab9 100644
+--- a/arch/avr32/kernel/time.c
++++ b/arch/avr32/kernel/time.c
+@@ -15,6 +15,8 @@
+ 
+ #include <asm/sysreg.h>
+ 
++#include <mach/cpu.h>
++#include <mach/init.h>
+ #include <mach/pm.h>
+ 
+ 
+@@ -116,6 +118,9 @@ void __init time_init(void)
+ 	unsigned long counter_hz;
+ 	int ret;
+ 
++	/* Make sure we don't get any interrupts until we ask for it. */
++	sysreg_write(COMPARE, 0);
++
+ 	xtime.tv_sec = mktime(2007, 1, 1, 0, 0, 0);
+ 	xtime.tv_nsec = 0;
+ 
+@@ -130,12 +135,16 @@ void __init time_init(void)
+ 	if (ret)
+ 		pr_debug("timer: could not register clocksource: %d\n", ret);
+ 
++	if (!cpu_has_working_compare()) {
++		platform_time_init();
++		return;
++	}
++
+ 	/* setup COMPARE clockevent */
+ 	comparator.mult = div_sc(counter_hz, NSEC_PER_SEC, comparator.shift);
+ 	comparator.max_delta_ns = clockevent_delta2ns((u32)~0, &comparator);
+ 	comparator.min_delta_ns = clockevent_delta2ns(50, &comparator) + 1;
+ 
+-	sysreg_write(COMPARE, 0);
+ 	timer_irqaction.dev_id = &comparator;
+ 
+ 	ret = setup_irq(0, &timer_irqaction);
+diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
+index 514c9a9..79ef59b 100644
+--- a/arch/avr32/mach-at32ap/Makefile
++++ b/arch/avr32/mach-at32ap/Makefile
+@@ -1,9 +1,14 @@
+-obj-y				+= pdc.o clock.o intc.o extint.o pio.o hsmc.o
++obj-y				+= pdc.o clock.o intc.o extint.o hsmc.o
+ obj-y				+= hmatrix.o
+-obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o pm-at32ap700x.o
++obj-$(CONFIG_PORTMUX_PIO)	+= pio.o
++obj-$(CONFIG_PORTMUX_GPIO_V2)	+= gpio-v2.o
++obj-$(CONFIG_TIMER_AST)		+= timer-ast.o
+ obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
+ obj-$(CONFIG_PM)		+= pm.o
+ 
++obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o pm-at32ap700x.o
++obj-$(CONFIG_CPU_AT32AP720X)	+= at32ap720x.o pm-at32ap720x.o
++
+ ifeq ($(CONFIG_PM_DEBUG),y)
+ CFLAGS_pm.o	+= -DDEBUG
+ endif
+diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
+index e01dbe4..7e83326 100644
+--- a/arch/avr32/mach-at32ap/at32ap700x.c
++++ b/arch/avr32/mach-at32ap/at32ap700x.c
+@@ -23,6 +23,7 @@
+ #include <mach/at32ap700x.h>
+ #include <mach/board.h>
+ #include <mach/hmatrix.h>
++#include <mach/pm.h>
+ #include <mach/portmux.h>
+ #include <mach/sram.h>
+ 
+@@ -30,7 +31,7 @@
+ 
+ #include "clock.h"
+ #include "pio.h"
+-#include "pm.h"
++#include "pm-v1.h"
+ 
+ 
+ #define PBMEM(base)					\
+@@ -82,8 +83,9 @@ static struct platform_device _name##_id##_device = {		\
+ 	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
+ }
+ 
+-#define select_peripheral(pin, periph, flags)			\
+-	at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
++#define select_peripheral(port, pin_mask, periph, flags)	\
++	at32_select_periph(GPIO_##port##_BASE, pin_mask,	\
++			   GPIO_##periph, flags)
+ 
+ #define DEV_CLK(_name, devname, bus, _index)			\
+ static struct clk devname##_##_name = {				\
+@@ -812,7 +814,7 @@ static struct resource pio4_resource[] = {
+ DEFINE_DEV(pio, 4);
+ DEV_CLK(mck, pio4, pba, 14);
+ 
+-void __init at32_add_system_devices(void)
++static int __init system_device_init(void)
+ {
+ 	platform_device_register(&at32_pm0_device);
+ 	platform_device_register(&at32_intc0_device);
+@@ -831,7 +833,10 @@ void __init at32_add_system_devices(void)
+ 	platform_device_register(&pio2_device);
+ 	platform_device_register(&pio3_device);
+ 	platform_device_register(&pio4_device);
++
++	return 0;
+ }
++core_initcall(system_device_init);
+ 
+ /* --------------------------------------------------------------------
+  *  PSIF
+@@ -871,6 +876,7 @@ static struct clk atmel_psif1_pclk = {
+ struct platform_device *__init at32_add_device_psif(unsigned int id)
+ {
+ 	struct platform_device *pdev;
++	u32 pin_mask;
+ 
+ 	if (!(id == 0 || id == 1))
+ 		return NULL;
+@@ -881,20 +887,22 @@ struct platform_device *__init at32_add_device_psif(unsigned int id)
+ 
+ 	switch (id) {
+ 	case 0:
++		pin_mask  = (1 << 8) | (1 << 9); /* CLOCK & DATA */
++
+ 		if (platform_device_add_resources(pdev, atmel_psif0_resource,
+ 					ARRAY_SIZE(atmel_psif0_resource)))
+ 			goto err_add_resources;
+ 		atmel_psif0_pclk.dev = &pdev->dev;
+-		select_peripheral(PA(8), PERIPH_A, 0); /* CLOCK */
+-		select_peripheral(PA(9), PERIPH_A, 0); /* DATA  */
++		select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+ 		break;
+ 	case 1:
++		pin_mask  = (1 << 11) | (1 << 12); /* CLOCK & DATA */
++
+ 		if (platform_device_add_resources(pdev, atmel_psif1_resource,
+ 					ARRAY_SIZE(atmel_psif1_resource)))
+ 			goto err_add_resources;
+ 		atmel_psif1_pclk.dev = &pdev->dev;
+-		select_peripheral(PB(11), PERIPH_A, 0); /* CLOCK */
+-		select_peripheral(PB(12), PERIPH_A, 0); /* DATA  */
++		select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
+ 		break;
+ 	default:
+ 		return NULL;
+@@ -958,26 +966,30 @@ DEV_CLK(usart, atmel_usart3, pba, 6);
+ 
+ static inline void configure_usart0_pins(void)
+ {
+-	select_peripheral(PA(8),  PERIPH_B, 0);	/* RXD	*/
+-	select_peripheral(PA(9),  PERIPH_B, 0);	/* TXD	*/
++	u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
++
++	select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
+ }
+ 
+ static inline void configure_usart1_pins(void)
+ {
+-	select_peripheral(PA(17), PERIPH_A, 0);	/* RXD	*/
+-	select_peripheral(PA(18), PERIPH_A, 0);	/* TXD	*/
++	u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
++
++	select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP);
+ }
+ 
+ static inline void configure_usart2_pins(void)
+ {
+-	select_peripheral(PB(26), PERIPH_B, 0);	/* RXD	*/
+-	select_peripheral(PB(27), PERIPH_B, 0);	/* TXD	*/
++	u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
++
++	select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
+ }
+ 
+ static inline void configure_usart3_pins(void)
+ {
+-	select_peripheral(PB(18), PERIPH_B, 0);	/* RXD	*/
+-	select_peripheral(PB(17), PERIPH_B, 0);	/* TXD	*/
++	u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
++
++	select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
+ }
+ 
+ static struct platform_device *__initdata at32_usarts[4];
+@@ -1057,59 +1069,73 @@ struct platform_device *__init
+ at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
+ {
+ 	struct platform_device *pdev;
++	u32 pin_mask;
+ 
+ 	switch (id) {
+ 	case 0:
+ 		pdev = &macb0_device;
+ 
+-		select_peripheral(PC(3),  PERIPH_A, 0);	/* TXD0	*/
+-		select_peripheral(PC(4),  PERIPH_A, 0);	/* TXD1	*/
+-		select_peripheral(PC(7),  PERIPH_A, 0);	/* TXEN	*/
+-		select_peripheral(PC(8),  PERIPH_A, 0);	/* TXCK */
+-		select_peripheral(PC(9),  PERIPH_A, 0);	/* RXD0	*/
+-		select_peripheral(PC(10), PERIPH_A, 0);	/* RXD1	*/
+-		select_peripheral(PC(13), PERIPH_A, 0);	/* RXER	*/
+-		select_peripheral(PC(15), PERIPH_A, 0);	/* RXDV	*/
+-		select_peripheral(PC(16), PERIPH_A, 0);	/* MDC	*/
+-		select_peripheral(PC(17), PERIPH_A, 0);	/* MDIO	*/
++		pin_mask  = (1 << 3);	/* TXD0 */
++		pin_mask |= (1 << 4);	/* TXD1 */
++		pin_mask |= (1 << 7);	/* TXEN */
++		pin_mask |= (1 << 8);	/* TXCK */
++		pin_mask |= (1 << 9);	/* RXD0 */
++		pin_mask |= (1 << 10);	/* RXD1 */
++		pin_mask |= (1 << 13);	/* RXER */
++		pin_mask |= (1 << 15);	/* RXDV */
++		pin_mask |= (1 << 16);	/* MDC  */
++		pin_mask |= (1 << 17);	/* MDIO */
+ 
+ 		if (!data->is_rmii) {
+-			select_peripheral(PC(0),  PERIPH_A, 0);	/* COL	*/
+-			select_peripheral(PC(1),  PERIPH_A, 0);	/* CRS	*/
+-			select_peripheral(PC(2),  PERIPH_A, 0);	/* TXER	*/
+-			select_peripheral(PC(5),  PERIPH_A, 0);	/* TXD2	*/
+-			select_peripheral(PC(6),  PERIPH_A, 0);	/* TXD3 */
+-			select_peripheral(PC(11), PERIPH_A, 0);	/* RXD2	*/
+-			select_peripheral(PC(12), PERIPH_A, 0);	/* RXD3	*/
+-			select_peripheral(PC(14), PERIPH_A, 0);	/* RXCK	*/
+-			select_peripheral(PC(18), PERIPH_A, 0);	/* SPD	*/
++			pin_mask |= (1 << 0);	/* COL  */
++			pin_mask |= (1 << 1);	/* CRS  */
++			pin_mask |= (1 << 2);	/* TXER */
++			pin_mask |= (1 << 5);	/* TXD2 */
++			pin_mask |= (1 << 6);	/* TXD3 */
++			pin_mask |= (1 << 11);	/* RXD2 */
++			pin_mask |= (1 << 12);	/* RXD3 */
++			pin_mask |= (1 << 14);	/* RXCK */
++#ifndef CONFIG_BOARD_MIMC200
++			pin_mask |= (1 << 18);	/* SPD  */
++#endif
+ 		}
++
++		select_peripheral(PIOC, pin_mask, PERIPH_A, 0);
++
+ 		break;
+ 
+ 	case 1:
+ 		pdev = &macb1_device;
+ 
+-		select_peripheral(PD(13), PERIPH_B, 0);		/* TXD0	*/
+-		select_peripheral(PD(14), PERIPH_B, 0);		/* TXD1	*/
+-		select_peripheral(PD(11), PERIPH_B, 0);		/* TXEN	*/
+-		select_peripheral(PD(12), PERIPH_B, 0);		/* TXCK */
+-		select_peripheral(PD(10), PERIPH_B, 0);		/* RXD0	*/
+-		select_peripheral(PD(6),  PERIPH_B, 0);		/* RXD1	*/
+-		select_peripheral(PD(5),  PERIPH_B, 0);		/* RXER	*/
+-		select_peripheral(PD(4),  PERIPH_B, 0);		/* RXDV	*/
+-		select_peripheral(PD(3),  PERIPH_B, 0);		/* MDC	*/
+-		select_peripheral(PD(2),  PERIPH_B, 0);		/* MDIO	*/
++		pin_mask  = (1 << 13);	/* TXD0 */
++		pin_mask |= (1 << 14);	/* TXD1 */
++		pin_mask |= (1 << 11);	/* TXEN */
++		pin_mask |= (1 << 12);	/* TXCK */
++		pin_mask |= (1 << 10);	/* RXD0 */
++		pin_mask |= (1 << 6);	/* RXD1 */
++		pin_mask |= (1 << 5);	/* RXER */
++		pin_mask |= (1 << 4);	/* RXDV */
++		pin_mask |= (1 << 3);	/* MDC  */
++		pin_mask |= (1 << 2);	/* MDIO */
++
++#ifndef CONFIG_BOARD_MIMC200
++		if (!data->is_rmii)
++			pin_mask |= (1 << 15);	/* SPD  */
++#endif
++
++		select_peripheral(PIOD, pin_mask, PERIPH_B, 0);
+ 
+ 		if (!data->is_rmii) {
+-			select_peripheral(PC(19), PERIPH_B, 0);	/* COL	*/
+-			select_peripheral(PC(23), PERIPH_B, 0);	/* CRS	*/
+-			select_peripheral(PC(26), PERIPH_B, 0);	/* TXER	*/
+-			select_peripheral(PC(27), PERIPH_B, 0);	/* TXD2	*/
+-			select_peripheral(PC(28), PERIPH_B, 0);	/* TXD3 */
+-			select_peripheral(PC(29), PERIPH_B, 0);	/* RXD2	*/
+-			select_peripheral(PC(30), PERIPH_B, 0);	/* RXD3	*/
+-			select_peripheral(PC(24), PERIPH_B, 0);	/* RXCK	*/
+-			select_peripheral(PD(15), PERIPH_B, 0);	/* SPD	*/
++			pin_mask  = (1 << 19);	/* COL  */
++			pin_mask |= (1 << 23);	/* CRS  */
++			pin_mask |= (1 << 26);	/* TXER */
++			pin_mask |= (1 << 27);	/* TXD2 */
++			pin_mask |= (1 << 28);	/* TXD3 */
++			pin_mask |= (1 << 29);	/* RXD2 */
++			pin_mask |= (1 << 30);	/* RXD3 */
++			pin_mask |= (1 << 24);	/* RXCK */
++
++			select_peripheral(PIOC, pin_mask, PERIPH_B, 0);
+ 		}
+ 		break;
+ 
+@@ -1130,6 +1156,7 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
+ static struct resource atmel_spi0_resource[] = {
+ 	PBMEM(0xffe00000),
+ 	IRQ(3),
++	{ 0 },	/* SRAM buffer, if available */
+ };
+ DEFINE_DEV(atmel_spi, 0);
+ DEV_CLK(spi_clk, atmel_spi0, pba, 0);
+@@ -1137,6 +1164,7 @@ DEV_CLK(spi_clk, atmel_spi0, pba, 0);
+ static struct resource atmel_spi1_resource[] = {
+ 	PBMEM(0xffe00400),
+ 	IRQ(4),
++	{ 0 },	/* SRAM buffer, if available */
+ };
+ DEFINE_DEV(atmel_spi, 1);
+ DEV_CLK(spi_clk, atmel_spi1, pba, 1);
+@@ -1166,6 +1194,8 @@ at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
+ struct platform_device *__init
+ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+ {
++	unsigned long sram_buf;
++
+ 	/*
+ 	 * Manage the chipselects as GPIOs, normally using the same pins
+ 	 * the SPI controller expects; but boards can use other pins.
+@@ -1177,23 +1207,28 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+ 		{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
+ 		  GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
+ 	struct platform_device *pdev;
++	u32 pin_mask;
+ 
+ 	switch (id) {
+ 	case 0:
+ 		pdev = &atmel_spi0_device;
++		pin_mask  = (1 << 1) | (1 << 2);	/* MOSI & SCK */
++
+ 		/* pullup MISO so a level is always defined */
+-		select_peripheral(PA(0),  PERIPH_A, AT32_GPIOF_PULLUP);
+-		select_peripheral(PA(1),  PERIPH_A, 0);	/* MOSI	 */
+-		select_peripheral(PA(2),  PERIPH_A, 0);	/* SCK	 */
++		select_peripheral(PIOA, (1 << 0), PERIPH_A, AT32_GPIOF_PULLUP);
++		select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
++
+ 		at32_spi_setup_slaves(0, b, n, spi0_pins);
+ 		break;
+ 
+ 	case 1:
+ 		pdev = &atmel_spi1_device;
++		pin_mask  = (1 << 1) | (1 << 5);	/* MOSI */
++
+ 		/* pullup MISO so a level is always defined */
+-		select_peripheral(PB(0),  PERIPH_B, AT32_GPIOF_PULLUP);
+-		select_peripheral(PB(1),  PERIPH_B, 0);	/* MOSI  */
+-		select_peripheral(PB(5),  PERIPH_B, 0);	/* SCK   */
++		select_peripheral(PIOB, (1 << 0), PERIPH_B, AT32_GPIOF_PULLUP);
++		select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
++
+ 		at32_spi_setup_slaves(1, b, n, spi1_pins);
+ 		break;
+ 
+@@ -1201,6 +1236,13 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+ 		return NULL;
+ 	}
+ 
++	sram_buf = sram_alloc(4096);
++	if (sram_buf) {
++		pdev->resource[2].start = sram_buf;
++		pdev->resource[2].end = sram_buf + 4096 - 1;
++		pdev->resource[2].flags = IORESOURCE_MEM;
++	}
++
+ 	spi_register_board_info(b, n);
+ 	platform_device_register(pdev);
+ 	return pdev;
+@@ -1226,6 +1268,7 @@ struct platform_device *__init at32_add_device_twi(unsigned int id,
+ 						    unsigned int n)
+ {
+ 	struct platform_device *pdev;
++	u32 pin_mask;
+ 
+ 	if (id != 0)
+ 		return NULL;
+@@ -1238,8 +1281,9 @@ struct platform_device *__init at32_add_device_twi(unsigned int id,
+ 				ARRAY_SIZE(atmel_twi0_resource)))
+ 		goto err_add_resources;
+ 
+-	select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
+-	select_peripheral(PA(7),  PERIPH_A, 0);	/* SDL	*/
++	pin_mask  = (1 << 6) | (1 << 7);	/* SDA & SDL */
++
++	select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+ 
+ 	atmel_twi0_pclk.dev = &pdev->dev;
+ 
+@@ -1272,10 +1316,16 @@ static struct clk atmel_mci0_pclk = {
+ struct platform_device *__init
+ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
+ {
+-	struct mci_platform_data	_data;
+ 	struct platform_device		*pdev;
++	struct dw_dma_slave		*dws;
++	u32				pioa_mask;
++	u32				piob_mask;
+ 
+-	if (id != 0)
++	if (id != 0 || !data)
++		return NULL;
++
++	/* Must have at least one usable slot */
++	if (!data->slot[0].bus_width && !data->slot[1].bus_width)
+ 		return NULL;
+ 
+ 	pdev = platform_device_alloc("atmel_mci", id);
+@@ -1286,28 +1336,80 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
+ 				ARRAY_SIZE(atmel_mci0_resource)))
+ 		goto fail;
+ 
+-	if (!data) {
+-		data = &_data;
+-		memset(data, -1, sizeof(struct mci_platform_data));
+-		data->detect_pin = GPIO_PIN_NONE;
+-		data->wp_pin = GPIO_PIN_NONE;
+-	}
++	if (data->dma_slave)
++		dws = kmemdup(to_dw_dma_slave(data->dma_slave),
++				sizeof(struct dw_dma_slave), GFP_KERNEL);
++	else
++		dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL);
++
++	dws->slave.dev = &pdev->dev;
++	dws->slave.dma_dev = &dw_dmac0_device.dev;
++	dws->slave.reg_width = DMA_SLAVE_WIDTH_32BIT;
++	dws->cfg_hi = (DWC_CFGH_SRC_PER(0)
++				| DWC_CFGH_DST_PER(1));
++	dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL
++				| DWC_CFGL_HS_SRC_POL);
++
++	data->dma_slave = &dws->slave;
+ 
+ 	if (platform_device_add_data(pdev, data,
+ 				sizeof(struct mci_platform_data)))
+ 		goto fail;
+ 
+-	select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
+-	select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
+-	select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
+-	select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
+-	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
+-	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
++	/* CLK line is common to both slots */
++	pioa_mask = 1 << 10;
+ 
+-	if (gpio_is_valid(data->detect_pin))
+-		at32_select_gpio(data->detect_pin, 0);
+-	if (gpio_is_valid(data->wp_pin))
+-		at32_select_gpio(data->wp_pin, 0);
++	switch (data->slot[0].bus_width) {
++	case 4:
++		pioa_mask |= 1 << 13;		/* DATA1 */
++		pioa_mask |= 1 << 14;		/* DATA2 */
++		pioa_mask |= 1 << 15;		/* DATA3 */
++		/* fall through */
++	case 1:
++		pioa_mask |= 1 << 11;		/* CMD	 */
++		pioa_mask |= 1 << 12;		/* DATA0 */
++
++		if (gpio_is_valid(data->slot[0].detect_pin))
++			at32_select_gpio(data->slot[0].detect_pin, 0);
++		if (gpio_is_valid(data->slot[0].wp_pin))
++			at32_select_gpio(data->slot[0].wp_pin, 0);
++		break;
++	case 0:
++		/* Slot is unused */
++		break;
++	default:
++		goto fail;
++	}
++
++	select_peripheral(PIOA, pioa_mask, PERIPH_A, 0);
++	piob_mask = 0;
++
++	switch (data->slot[1].bus_width) {
++	case 4:
++		piob_mask |= 1 <<  8;		/* DATA1 */
++		piob_mask |= 1 <<  9;		/* DATA2 */
++		piob_mask |= 1 << 10;		/* DATA3 */
++		/* fall through */
++	case 1:
++		piob_mask |= 1 <<  6;		/* CMD	 */
++		piob_mask |= 1 <<  7;		/* DATA0 */
++		select_peripheral(PIOB, piob_mask, PERIPH_B, 0);
++
++		if (gpio_is_valid(data->slot[1].detect_pin))
++			at32_select_gpio(data->slot[1].detect_pin, 0);
++		if (gpio_is_valid(data->slot[1].wp_pin))
++			at32_select_gpio(data->slot[1].wp_pin, 0);
++		break;
++	case 0:
++		/* Slot is unused */
++		break;
++	default:
++		if (!data->slot[0].bus_width)
++			goto fail;
++
++		data->slot[1].bus_width = 0;
++		break;
++	}
+ 
+ 	atmel_mci0_pclk.dev = &pdev->dev;
+ 
+@@ -1353,13 +1455,14 @@ static struct clk atmel_lcdfb0_pixclk = {
+ struct platform_device *__init
+ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+ 		     unsigned long fbmem_start, unsigned long fbmem_len,
+-		     unsigned int pin_config)
++		     u64 pin_mask)
+ {
+ 	struct platform_device *pdev;
+ 	struct atmel_lcdfb_info *info;
+ 	struct fb_monspecs *monspecs;
+ 	struct fb_videomode *modedb;
+ 	unsigned int modedb_size;
++	u32 portc_mask, portd_mask, porte_mask;
+ 
+ 	/*
+ 	 * Do a deep copy of the fb data, monspecs and modedb. Make
+@@ -1381,76 +1484,21 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+ 	case 0:
+ 		pdev = &atmel_lcdfb0_device;
+ 
+-		switch (pin_config) {
+-		case 0:
+-			select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
+-			select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
+-			select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
+-			select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
+-			select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
+-			select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
+-			select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
+-			select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
+-			select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
+-			select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
+-			select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
+-			select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
+-			select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
+-			select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
+-			select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
+-			select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
+-			select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
+-			select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
+-			select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
+-			select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
+-			select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
+-			select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
+-			select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
+-			select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
+-			select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
+-			select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
+-			select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
+-			select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
+-			select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
+-			select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
+-			select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
+-			break;
+-		case 1:
+-			select_peripheral(PE(0),  PERIPH_B, 0);	/* CC	  */
+-			select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
+-			select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
+-			select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
+-			select_peripheral(PE(1),  PERIPH_B, 0);	/* DVAL	  */
+-			select_peripheral(PE(2),  PERIPH_B, 0);	/* MODE	  */
+-			select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
+-			select_peripheral(PE(3),  PERIPH_B, 0);	/* DATA0  */
+-			select_peripheral(PE(4),  PERIPH_B, 0);	/* DATA1  */
+-			select_peripheral(PE(5),  PERIPH_B, 0);	/* DATA2  */
+-			select_peripheral(PE(6),  PERIPH_B, 0);	/* DATA3  */
+-			select_peripheral(PE(7),  PERIPH_B, 0);	/* DATA4  */
+-			select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
+-			select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
+-			select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
+-			select_peripheral(PE(8),  PERIPH_B, 0);	/* DATA8  */
+-			select_peripheral(PE(9),  PERIPH_B, 0);	/* DATA9  */
+-			select_peripheral(PE(10), PERIPH_B, 0);	/* DATA10 */
+-			select_peripheral(PE(11), PERIPH_B, 0);	/* DATA11 */
+-			select_peripheral(PE(12), PERIPH_B, 0);	/* DATA12 */
+-			select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
+-			select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
+-			select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
+-			select_peripheral(PE(13), PERIPH_B, 0);	/* DATA16 */
+-			select_peripheral(PE(14), PERIPH_B, 0);	/* DATA17 */
+-			select_peripheral(PE(15), PERIPH_B, 0);	/* DATA18 */
+-			select_peripheral(PE(16), PERIPH_B, 0);	/* DATA19 */
+-			select_peripheral(PE(17), PERIPH_B, 0);	/* DATA20 */
+-			select_peripheral(PE(18), PERIPH_B, 0);	/* DATA21 */
+-			select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
+-			select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
+-			break;
+-		default:
+-			goto err_invalid_id;
+-		}
++		if (pin_mask == 0ULL)
++			/* Default to "full" lcdc control signals and 24bit */
++			pin_mask = ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL;
++
++		/* LCDC on port C */
++		portc_mask = pin_mask & 0xfff80000;
++		select_peripheral(PIOC, portc_mask, PERIPH_A, 0);
++
++		/* LCDC on port D */
++		portd_mask = pin_mask & 0x0003ffff;
++		select_peripheral(PIOD, portd_mask, PERIPH_A, 0);
++
++		/* LCDC on port E */
++		porte_mask = (pin_mask >> 32) & 0x0007ffff;
++		select_peripheral(PIOE, porte_mask, PERIPH_B, 0);
+ 
+ 		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
+ 		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
+@@ -1499,6 +1547,7 @@ static struct clk atmel_pwm0_mck = {
+ struct platform_device *__init at32_add_device_pwm(u32 mask)
+ {
+ 	struct platform_device *pdev;
++	u32 pin_mask;
+ 
+ 	if (!mask)
+ 		return NULL;
+@@ -1514,14 +1563,21 @@ struct platform_device *__init at32_add_device_pwm(u32 mask)
+ 	if (platform_device_add_data(pdev, &mask, sizeof(mask)))
+ 		goto out_free_pdev;
+ 
++	pin_mask = 0;
+ 	if (mask & (1 << 0))
+-		select_peripheral(PA(28), PERIPH_A, 0);
++		pin_mask |= (1 << 28);
+ 	if (mask & (1 << 1))
+-		select_peripheral(PA(29), PERIPH_A, 0);
++		pin_mask |= (1 << 29);
++	if (pin_mask > 0)
++		select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
++
++	pin_mask = 0;
+ 	if (mask & (1 << 2))
+-		select_peripheral(PA(21), PERIPH_B, 0);
++		pin_mask |= (1 << 21);
+ 	if (mask & (1 << 3))
+-		select_peripheral(PA(22), PERIPH_B, 0);
++		pin_mask |= (1 << 22);
++	if (pin_mask > 0)
++		select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
+ 
+ 	atmel_pwm0_mck.dev = &pdev->dev;
+ 
+@@ -1562,52 +1618,65 @@ struct platform_device *__init
+ at32_add_device_ssc(unsigned int id, unsigned int flags)
+ {
+ 	struct platform_device *pdev;
++	u32 pin_mask = 0;
+ 
+ 	switch (id) {
+ 	case 0:
+ 		pdev = &ssc0_device;
+ 		if (flags & ATMEL_SSC_RF)
+-			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
++			pin_mask |= (1 << 21);	/* RF */
+ 		if (flags & ATMEL_SSC_RK)
+-			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
++			pin_mask |= (1 << 22);	/* RK */
+ 		if (flags & ATMEL_SSC_TK)
+-			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
++			pin_mask |= (1 << 23);	/* TK */
+ 		if (flags & ATMEL_SSC_TF)
+-			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
++			pin_mask |= (1 << 24);	/* TF */
+ 		if (flags & ATMEL_SSC_TD)
+-			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
++			pin_mask |= (1 << 25);	/* TD */
+ 		if (flags & ATMEL_SSC_RD)
+-			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
++			pin_mask |= (1 << 26);	/* RD */
++
++		if (pin_mask > 0)
++			select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
++
+ 		break;
+ 	case 1:
+ 		pdev = &ssc1_device;
+ 		if (flags & ATMEL_SSC_RF)
+-			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
++			pin_mask |= (1 << 0);	/* RF */
+ 		if (flags & ATMEL_SSC_RK)
+-			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
++			pin_mask |= (1 << 1);	/* RK */
+ 		if (flags & ATMEL_SSC_TK)
+-			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
++			pin_mask |= (1 << 2);	/* TK */
+ 		if (flags & ATMEL_SSC_TF)
+-			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
++			pin_mask |= (1 << 3);	/* TF */
+ 		if (flags & ATMEL_SSC_TD)
+-			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
++			pin_mask |= (1 << 4);	/* TD */
+ 		if (flags & ATMEL_SSC_RD)
+-			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
++			pin_mask |= (1 << 5);	/* RD */
++
++		if (pin_mask > 0)
++			select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
++
+ 		break;
+ 	case 2:
+ 		pdev = &ssc2_device;
+ 		if (flags & ATMEL_SSC_TD)
+-			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
++			pin_mask |= (1 << 13);	/* TD */
+ 		if (flags & ATMEL_SSC_RD)
+-			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
++			pin_mask |= (1 << 14);	/* RD */
+ 		if (flags & ATMEL_SSC_TK)
+-			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
++			pin_mask |= (1 << 15);	/* TK */
+ 		if (flags & ATMEL_SSC_TF)
+-			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
++			pin_mask |= (1 << 16);	/* TF */
+ 		if (flags & ATMEL_SSC_RF)
+-			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
++			pin_mask |= (1 << 17);	/* RF */
+ 		if (flags & ATMEL_SSC_RK)
+-			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
++			pin_mask |= (1 << 18);	/* RK */
++
++		if (pin_mask > 0)
++			select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
++
+ 		break;
+ 	default:
+ 		return NULL;
+@@ -1745,14 +1814,15 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
+ 		unsigned int cs, unsigned int extint)
+ {
+ 	static unsigned int extint_pin_map[4] __initdata = {
+-		GPIO_PIN_PB(25),
+-		GPIO_PIN_PB(26),
+-		GPIO_PIN_PB(27),
+-		GPIO_PIN_PB(28),
++		(1 << 25),
++		(1 << 26),
++		(1 << 27),
++		(1 << 28),
+ 	};
+ 	static bool common_pins_initialized __initdata = false;
+ 	unsigned int extint_pin;
+ 	int ret;
++	u32 pin_mask;
+ 
+ 	if (extint >= ARRAY_SIZE(extint_pin_map))
+ 		return -EINVAL;
+@@ -1766,7 +1836,8 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
+ 		if (ret)
+ 			return ret;
+ 
+-		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
++		/* NCS4   -> OE_N  */
++		select_peripheral(PIOE, (1 << 21), PERIPH_A, 0);
+ 		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF0_ENABLE);
+ 		break;
+ 	case 5:
+@@ -1776,7 +1847,8 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
+ 		if (ret)
+ 			return ret;
+ 
+-		select_peripheral(PE(22), PERIPH_A, 0); /* NCS5   -> OE_N  */
++		/* NCS5   -> OE_N  */
++		select_peripheral(PIOE, (1 << 22), PERIPH_A, 0);
+ 		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF1_ENABLE);
+ 		break;
+ 	default:
+@@ -1784,14 +1856,17 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
+ 	}
+ 
+ 	if (!common_pins_initialized) {
+-		select_peripheral(PE(19), PERIPH_A, 0);	/* CFCE1  -> CS0_N */
+-		select_peripheral(PE(20), PERIPH_A, 0);	/* CFCE2  -> CS1_N */
+-		select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW  -> DIR   */
+-		select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT  <- IORDY */
++		pin_mask  = (1 << 19);	/* CFCE1  -> CS0_N */
++		pin_mask |= (1 << 20);	/* CFCE2  -> CS1_N */
++		pin_mask |= (1 << 23);	/* CFRNW  -> DIR   */
++		pin_mask |= (1 << 24);	/* NWAIT  <- IORDY */
++
++		select_peripheral(PIOE, pin_mask, PERIPH_A, 0);
++
+ 		common_pins_initialized = true;
+ 	}
+ 
+-	at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
++	select_peripheral(PIOB, extint_pin, PERIPH_A, AT32_GPIOF_DEGLITCH);
+ 
+ 	pdev->resource[1].start = EIM_IRQ_BASE + extint;
+ 	pdev->resource[1].end = pdev->resource[1].start;
+@@ -1930,6 +2005,7 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
+ {
+ 	struct platform_device *pdev;
+ 	struct ac97c_platform_data _data;
++	u32 pin_mask;
+ 
+ 	if (id != 0)
+ 		return NULL;
+@@ -1956,10 +2032,10 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
+ 				sizeof(struct ac97c_platform_data)))
+ 		goto fail;
+ 
+-	select_peripheral(PB(20), PERIPH_B, 0);	/* SDO	*/
+-	select_peripheral(PB(21), PERIPH_B, 0);	/* SYNC	*/
+-	select_peripheral(PB(22), PERIPH_B, 0);	/* SCLK	*/
+-	select_peripheral(PB(23), PERIPH_B, 0);	/* SDI	*/
++	pin_mask  = (1 << 20) | (1 << 21);	/* SDO & SYNC */
++	pin_mask |= (1 << 22) | (1 << 23);	/* SCLK & SDI */
++
++	select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+ 
+ 	/* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
+ 	if (data->reset_pin != GPIO_PIN_NONE)
+@@ -2001,6 +2077,7 @@ static struct clk abdac0_sample_clk = {
+ struct platform_device *__init at32_add_device_abdac(unsigned int id)
+ {
+ 	struct platform_device *pdev;
++	u32 pin_mask;
+ 
+ 	if (id != 0)
+ 		return NULL;
+@@ -2013,10 +2090,10 @@ struct platform_device *__init at32_add_device_abdac(unsigned int id)
+ 				ARRAY_SIZE(abdac0_resource)))
+ 		goto err_add_resources;
+ 
+-	select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
+-	select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
+-	select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
+-	select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
++	pin_mask  = (1 << 20) | (1 << 22);	/* DATA1 & DATAN1 */
++	pin_mask |= (1 << 21) | (1 << 23);	/* DATA0 & DATAN0 */
++
++	select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
+ 
+ 	abdac0_pclk.dev = &pdev->dev;
+ 	abdac0_sample_clk.dev = &pdev->dev;
+@@ -2073,7 +2150,7 @@ static struct clk gclk4 = {
+ 	.index		= 4,
+ };
+ 
+-struct clk *at32_clock_list[] = {
++static __initdata struct clk *init_clocks[] = {
+ 	&osc32k,
+ 	&osc0,
+ 	&osc1,
+@@ -2137,7 +2214,6 @@ struct clk *at32_clock_list[] = {
+ 	&gclk3,
+ 	&gclk4,
+ };
+-unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
+ 
+ void __init setup_platform(void)
+ {
+@@ -2168,14 +2244,19 @@ void __init setup_platform(void)
+ 	genclk_init_parent(&abdac0_sample_clk);
+ 
+ 	/*
+-	 * Turn on all clocks that have at least one user already, and
+-	 * turn off everything else. We only do this for module
+-	 * clocks, and even though it isn't particularly pretty to
+-	 * check the address of the mode function, it should do the
+-	 * trick...
++	 * Build initial dynamic clock list by registering all clocks
++	 * from the array.
++	 * At the same time, turn on all clocks that have at least one
++	 * user already, and turn off everything else. We only do this
++	 * for module clocks, and even though it isn't particularly
++	 * pretty to  check the address of the mode function, it should
++	 * do the trick...
+ 	 */
+-	for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
+-		struct clk *clk = at32_clock_list[i];
++	for (i = 0; i < ARRAY_SIZE(init_clocks); i++) {
++		struct clk *clk = init_clocks[i];
++
++		/* first, register clock */
++		at32_clk_register(clk);
+ 
+ 		if (clk->users == 0)
+ 			continue;
+@@ -2203,6 +2284,11 @@ void __init setup_platform(void)
+ 	at32_init_pio(&pio4_device);
+ }
+ 
++unsigned long at32_get_reset_cause(void)
++{
++	return pm_readl(RCAUSE);
++}
++
+ struct gen_pool *sram_pool;
+ 
+ static int __init sram_init(void)
+diff --git a/arch/avr32/mach-at32ap/at32ap720x.c b/arch/avr32/mach-at32ap/at32ap720x.c
+new file mode 100644
+index 0000000..0cb675a
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/at32ap720x.c
+@@ -0,0 +1,2303 @@
++/*
++ * Copyright (C) 2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/atmel_pdca.h>
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/dw_dmac.h>
++#include <linux/errno.h>
++#include <linux/fb.h>
++#include <linux/gpio.h>
++#include <linux/io.h>
++#include <linux/ioport.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/pm.h>
++#include <linux/spinlock.h>
++#include <linux/spi/atmel_spi.h>
++#include <linux/spi/spi.h>
++#include <video/atmel_lcdc.h>
++#include <video/atmel_mpop.h>
++
++#include <asm/ast_regs.h>
++#include <asm/atmel-mci.h>
++
++#include <mach/at32ap720x.h>
++#include <mach/board.h>
++#include <mach/hmatrix.h>
++#include <mach/init.h>
++#include <mach/pm.h>
++#include <mach/portmux.h>
++#include <mach/sram.h>
++
++#include "clock.h"
++#include "gpio-v2.h"
++#include "pm-v3.h"
++#include "sdc.h"
++
++#define PBMEM(base)					\
++	{						\
++		.start		= base,			\
++		.end		= base + 0x3ff,		\
++		.flags		= IORESOURCE_MEM,	\
++	}
++#define IRQ(num)					\
++	{						\
++		.start		= num,			\
++		.end		= num,			\
++		.flags		= IORESOURCE_IRQ,	\
++	}
++
++#define select_peripheral(port, pin_mask, periph, flags)	\
++	at32_select_periph(GPIO_##port##_BASE, pin_mask,	\
++			   GPIO_##periph, flags)
++
++#define DEV_CLK(_name, devname, bus, _index)			\
++static struct clk devname##_##_name = {				\
++	.name		= #_name,				\
++	.dev		= &devname##_device.dev,		\
++	.parent		= &bus##_clk,				\
++	.mode		= bus##_clk_mode,			\
++	.get_rate	= bus##_clk_get_rate,			\
++	.index		= _index,				\
++}
++
++static DEFINE_SPINLOCK(pm_lock);
++
++static unsigned long rcosc_get_rate(struct clk *clk)
++{
++	return 32768;
++}
++
++static unsigned long osc_get_rate(struct clk *clk)
++{
++	return at32_board_osc_rates[clk->index];
++}
++
++static void osc32_mode(struct clk *clk, int enabled)
++{
++	/* We never disable the 32 kHz oscillator */
++	if (!enabled)
++		return;
++
++	/* If it's already running, we're done. */
++	if (pm_readl(POSCSR) & PM_BIT(POSCSR_OSC32RDY))
++		return;
++
++	/* Enable it, unless someone did it for us already */
++	if (!(sdc_readl(OSCCTRL32) & SDC_BIT(OSCCTRL32_OSC32EN))) {
++		u32 value;
++
++		value = SDC_BF(OSCCTRL32_STARTUP, 5)
++			| SDC_BF(OSCCTRL32_MODE, 0xd)
++			| SDC_BIT(OSCCTRL32_OSC32EN);
++
++		sdc_writel(OSCCTRL32, value | SDC_BF(OSCCTRL32_KEY, 0x55));
++		sdc_writel(OSCCTRL32, value | SDC_BF(OSCCTRL32_KEY, 0xaa));
++	}
++
++	pr_info("Waiting for 32 kHz crystal oscillator to start...\n");
++
++	while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_OSC32RDY)))
++		cpu_relax();
++}
++
++static void oscn_mode(struct clk *clk, int enabled)
++{
++	unsigned int	i = clk->index;
++	u32		mcctrl;
++
++	BUG_ON(i > 2);
++
++	/* Let's keep oscillators running for now... */
++	if (!enabled)
++		goto out;
++
++	/* If it's already running, we're done */
++	if (pm_readl(POSCSR) & (PM_BIT(POSCSR_OSC0RDY) << i))
++		goto out;
++
++	/* Enable it, unless someone did it for us already */
++	mcctrl = pm_readl(MCCTRL);
++	if (!(mcctrl & (PM_BIT(MCCTRL_OSC0EN) << i))) {
++		/* TODO: Make OSC startup parameters configurable */
++		pm_writel(OSCCTRL[i], PM_BF(OSCCTRLx_STARTUP, 5)
++				| PM_BF(OSCCTRLx_MODE, 0xa));
++		pm_writel(MCCTRL, mcctrl | (PM_BIT(MCCTRL_OSC0EN) << i));
++	}
++
++	pr_debug("clk %s: waiting for clock to become ready...\n", clk->name);
++	pr_debug("clk %s: MCCTRL=%08x OSCCTRL%u=%08x\n", clk->name,
++			pm_readl(MCCTRL), i, pm_readl(OSCCTRL[i]));
++
++	while (!(pm_readl(POSCSR) & (PM_BIT(POSCSR_OSC0RDY) << i)))
++		cpu_relax();
++
++out:
++	pr_debug("clk %s: running\n", clk->name);
++}
++
++static struct clk rcosc = {
++	.name		= "rcosc",
++	.get_rate	= rcosc_get_rate,
++	.users		= 1,
++};
++static struct clk osc0 = {
++	.name		= "osc0",
++	.get_rate	= osc_get_rate,
++	.mode		= oscn_mode,
++	.users		= 1,
++	.index		= 0,
++};
++static struct clk osc1 = {
++	.name		= "osc1",
++	.get_rate	= osc_get_rate,
++	.mode		= oscn_mode,
++	.index		= 1,
++};
++static struct clk osc2 = {
++	.name		= "osc2",
++	.get_rate	= osc_get_rate,
++	.mode		= oscn_mode,
++	.index		= 2,
++};
++static struct clk osc32 = {
++	.name		= "osc32k",
++	.get_rate	= osc_get_rate,
++	.mode		= osc32_mode,
++	.index		= 3,
++};
++
++static void pll_mode(struct clk *clk, int enabled)
++{
++	unsigned long timeout;
++	unsigned int index = clk->index;
++	u32 status;
++	u32 ctrl;
++
++	ctrl = pm_readl(PLL[index]);
++
++	if (enabled) {
++		if (PM_BFEXT(PLLx_PLLMUL, ctrl) <= 1) {
++			pr_debug("clk %s: failed to enable, rate not set\n",
++					clk->name);
++			return;
++		}
++
++		ctrl |= PM_BIT(PLLx_PLLEN);
++		pm_writel(PLL[index], ctrl);
++
++		pr_debug("clk %s: waiting for lock...\n", clk->name);
++		for (timeout = 10000; timeout; timeout--) {
++			status = pm_readl(POSCSR);
++			if (status & (PM_BIT(POSCSR_LOCK0) << index))
++				break;
++			udelay(10);
++		}
++
++		if (!(status & (PM_BIT(POSCSR_LOCK0) << index)))
++			pr_err("clk %s: timeout waiting for lock\n",
++					clk->name);
++		else
++			pr_debug("clk %s: running\n", clk->name);
++	} else {
++		ctrl &= ~PM_BIT(PLLx_PLLEN);
++		pm_writel(PLL[index], ctrl);
++		pr_debug("clk %s: stopped\n", clk->name);
++	}
++}
++
++
++static unsigned long pll_get_rate(struct clk *clk)
++{
++	unsigned long rate;
++	unsigned int div;
++	unsigned int mul;
++	u32 ctrl;
++
++	ctrl = pm_readl(PLL[clk->index]);
++
++	div = PM_BFEXT(PLLx_PLLDIV, ctrl);
++	mul = PM_BFEXT(PLLx_PLLMUL, ctrl);
++
++	rate = clk->parent->get_rate(clk->parent);
++	if (div != 0)
++		rate = (rate + div / 2) / div;
++	else
++		rate = rate * 2;
++	rate *= mul;
++
++	if (ctrl & PM_BF(PLLx_PLLOPT, 4))
++		rate = (rate + 1) / 2;
++
++	return rate;
++}
++
++static long pll_set_rate(struct clk *clk, unsigned long rate, int apply)
++{
++	unsigned long mul_best_fit = 0;
++	unsigned long div;
++	unsigned long div_min;
++	unsigned long div_max;
++	unsigned long div_best_fit = 0;
++	unsigned long base;
++	unsigned long fvco;
++	unsigned long actual = 0;
++	unsigned long rate_error_prev = ~0UL;
++	u32 ctrl;
++
++	/* Rate must be between 25 MHz and 400 Mhz. */
++	if (rate < 25000000UL || rate > 400000000UL)
++		return -EINVAL;
++
++	base = clk->parent->get_rate(clk->parent);
++
++	/* PLL input frequency must be between 10 MHz and 200 MHz. */
++	div_min = DIV_ROUND_UP(base, 200000000UL);
++	div_max = base / 10000000UL;
++
++	if (div_max < div_min)
++		return -EINVAL;
++
++	for (div = div_min; div <= div_max; div++) {
++		unsigned long mul;
++		unsigned long pll_in;
++		unsigned long rate_error;
++
++		pll_in = (base + div / 2) / div;
++		mul = (rate + pll_in / 2) / pll_in;
++
++		if (mul < 1)
++			continue;
++
++		actual = pll_in * mul;
++		rate_error = abs(actual - rate);
++
++		if (rate_error < rate_error_prev) {
++			mul_best_fit = mul;
++			div_best_fit = div;
++			rate_error_prev = rate_error;
++		}
++
++		if (rate_error == 0)
++			break;
++	}
++
++	if (div_best_fit == 0)
++		return -EINVAL;
++
++	ctrl = 0;
++	fvco = actual;
++
++	/*
++	 * MUL=1 is not allowed. So we must double it and set the
++	 * divide-by-two bit.
++	 */
++	if (mul_best_fit == 1) {
++		ctrl |= PM_BF(PLLx_PLLOPT, 4);
++		mul_best_fit *= 2;
++		fvco = actual * 2;
++	}
++
++	if (fvco > 200000000)
++		ctrl |= PM_BF(PLLx_PLLOPT, 3);
++	else if (fvco > 100000000)
++		ctrl |= PM_BF(PLLx_PLLOPT, 2);
++	else if (fvco > 50000000)
++		ctrl |= PM_BF(PLLx_PLLOPT, 1);
++
++	ctrl |= PM_BF(PLLx_PLLCOUNT, 31);
++	ctrl |= PM_BF(PLLx_PLLMUL, mul_best_fit);
++	ctrl |= PM_BF(PLLx_PLLDIV, div_best_fit);
++	ctrl |= PM_BF(PLLx_PLLOSC, clk->parent->index);
++
++	if (apply) {
++		if (actual != rate)
++			return -EINVAL;
++		if (clk->users > 0)
++			return -EBUSY;
++		pr_debug(KERN_INFO "clk %s: new rate %lu (actual rate %lu)\n",
++				clk->name, rate, actual);
++		pm_writel(PLL[clk->index], ctrl);
++	}
++
++	return actual;
++}
++
++static int pll_set_parent(struct clk *clk, struct clk *parent)
++{
++	unsigned int index = clk->index;
++	u32 ctrl;
++
++	if (clk->users > 0)
++		return -EBUSY;
++
++	ctrl = pm_readl(PLL[index]);
++	BUG_ON(ctrl & PM_BIT(PLLx_PLLEN));
++
++	ctrl = PM_BFINS(PLLx_PLLOSC, parent->index, ctrl);
++	pm_writel(PLL[index], ctrl);
++
++	clk->parent = parent;
++
++	return 0;
++}
++
++static struct clk pll0 = {
++	.name		= "pll0",
++	.mode		= pll_mode,
++	.get_rate	= pll_get_rate,
++	.set_rate	= pll_set_rate,
++	.set_parent	= pll_set_parent,
++	.users		= 1,
++	.index		= 0,
++};
++static struct clk pll1 = {
++	.name		= "pll1",
++	.mode		= pll_mode,
++	.get_rate	= pll_get_rate,
++	.set_rate	= pll_set_rate,
++	.set_parent	= pll_set_parent,
++	.users		= 0,
++	.index		= 1,
++};
++static struct clk pll2 = {
++	.name		= "pll2",
++	.mode		= pll_mode,
++	.get_rate	= pll_get_rate,
++	.set_rate	= pll_set_rate,
++	.set_parent	= pll_set_parent,
++	.users		= 0,
++	.index		= 2,
++};
++
++/*
++ * The main clock can be either rcosc, osc0 or pll0.  The boot loader
++ * may have chosen one for us, so we don't really know which one until
++ * we have a look at the PM registers.
++ */
++static struct clk *main_clock;
++
++/*
++ * Synchronous clocks are generated from the main clock. The clocks
++ * must satisfy the constraint
++ *   fCPU >= fHSB >= fPB
++ * i.e. each clock must not be faster than its parent.
++ */
++static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
++{
++	return main_clock->get_rate(main_clock) >> shift;
++};
++
++static void cpu_clk_mode(struct clk *clk, int enabled)
++{
++	unsigned long flags;
++	u32 mask;
++
++	spin_lock_irqsave(&pm_lock, flags);
++
++	while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_MSKRDY)))
++		cpu_relax();
++
++	mask = pm_readl(CPUMASK);
++	if (enabled)
++		mask |= 1 << clk->index;
++	else
++		mask &= ~(1 << clk->index);
++	pm_writel(CPUMASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long cpu_clk_get_rate(struct clk *clk)
++{
++	unsigned long cksel, shift = 0;
++
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(CKSEL_CPUDIV))
++		shift = PM_BFEXT(CKSEL_CPUSEL, cksel) + 1;
++
++	return bus_clk_get_rate(clk, shift);
++}
++
++static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
++{
++	u32 control;
++	unsigned long parent_rate, child_div, actual_rate, div;
++
++	parent_rate = clk->parent->get_rate(clk->parent);
++	control = pm_readl(CKSEL);
++
++	if (control & PM_BIT(CKSEL_HSBDIV))
++		child_div = 1 << (PM_BFEXT(CKSEL_HSBSEL, control) + 1);
++	else
++		child_div = 1;
++
++	if (rate > 3 * (parent_rate / 4) || child_div == 1) {
++		actual_rate = parent_rate;
++		control &= ~PM_BIT(CKSEL_CPUDIV);
++	} else {
++		unsigned int cpusel;
++		div = (parent_rate + rate / 2) / rate;
++		if (div > child_div)
++			div = child_div;
++		cpusel = (div > 1) ? (fls(div) - 2) : 0;
++		control = PM_BIT(CKSEL_CPUDIV)
++			| PM_BFINS(CKSEL_CPUSEL, cpusel, control);
++		actual_rate = parent_rate / (1 << (cpusel + 1));
++	}
++
++	pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
++			clk->name, rate, actual_rate);
++
++	if (apply) {
++		while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_CKRDY)))
++			cpu_relax();
++
++		pm_writel(CKSEL, control);
++	}
++
++	return actual_rate;
++}
++
++static void hsb_clk_mode(struct clk *clk, int enabled)
++{
++	unsigned long flags;
++	u32 mask;
++
++	spin_lock_irqsave(&pm_lock, flags);
++
++	while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_MSKRDY)))
++		cpu_relax();
++
++	mask = pm_readl(HSBMASK);
++	if (enabled)
++		mask |= 1 << clk->index;
++	else
++		mask &= ~(1 << clk->index);
++	pm_writel(HSBMASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long hsb_clk_get_rate(struct clk *clk)
++{
++	unsigned long cksel, shift = 0;
++
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(CKSEL_HSBDIV))
++		shift = PM_BFEXT(CKSEL_HSBSEL, cksel) + 1;
++
++	return bus_clk_get_rate(clk, shift);
++}
++
++static void pba_clk_mode(struct clk *clk, int enabled)
++{
++	unsigned long flags;
++	u32 mask;
++
++	spin_lock_irqsave(&pm_lock, flags);
++
++	while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_MSKRDY)))
++		cpu_relax();
++
++	mask = pm_readl(PBAMASK);
++	if (enabled)
++		mask |= 1 << clk->index;
++	else
++		mask &= ~(1 << clk->index);
++	pm_writel(PBAMASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long pba_clk_get_rate(struct clk *clk)
++{
++	unsigned long cksel, shift = 0;
++
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(CKSEL_PBADIV))
++		shift = PM_BFEXT(CKSEL_PBASEL, cksel) + 1;
++
++	return bus_clk_get_rate(clk, shift);
++}
++
++static void pbb_clk_mode(struct clk *clk, int enabled)
++{
++	unsigned long flags;
++	u32 mask;
++
++	spin_lock_irqsave(&pm_lock, flags);
++
++	while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_MSKRDY)))
++		cpu_relax();
++
++	mask = pm_readl(PBBMASK);
++	if (enabled)
++		mask |= 1 << clk->index;
++	else
++		mask &= ~(1 << clk->index);
++	pm_writel(PBBMASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long pbb_clk_get_rate(struct clk *clk)
++{
++	unsigned long cksel, shift = 0;
++
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(CKSEL_PBBDIV))
++		shift = PM_BFEXT(CKSEL_PBBSEL, cksel) + 1;
++
++	return bus_clk_get_rate(clk, shift);
++}
++
++static struct clk cpu_clk = {
++	.name		= "cpu",
++	.get_rate	= cpu_clk_get_rate,
++	.set_rate	= cpu_clk_set_rate,
++	.users		= 1,
++};
++static struct clk hsb_clk = {
++	.name		= "hsb",
++	.parent		= &cpu_clk,
++	.get_rate	= hsb_clk_get_rate,
++};
++static struct clk pba_clk = {
++	.name		= "pba",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= pba_clk_get_rate,
++	.users		= 1,
++	.index		= 1,
++};
++static struct clk pbb_clk = {
++	.name		= "pbb",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.users		= 1,
++	.index		= 2,
++};
++static struct clk pbc_clk = {
++	.name		= "pbc",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 3,
++};
++
++/* --------------------------------------------------------------------
++ *  Generic Clocks
++ * -------------------------------------------------------------------- */
++
++/* Mapping from GCCTRL:OSCSEL values to parent clocks */
++static struct clk *const genclk_parent[] = {
++	&rcosc,
++	&osc32,
++	&osc0,
++	&osc1,
++	&osc2,
++	&pll0,
++	&pll1,
++	&pll2,
++	&cpu_clk,
++	&hsb_clk,
++	&pba_clk,
++	&pbb_clk,
++};
++
++#define NR_GENERIC_CLOCKS	8
++
++static void genclk_mode(struct clk *clk, int enabled)
++{
++	u32 control;
++
++	control = pm_readl(GCCTRL[clk->index]);
++	if (enabled)
++		control |= PM_BIT(GCCTRL_CEN);
++	else
++		control &= PM_BIT(GCCTRL_CEN);
++	pm_writel(GCCTRL[clk->index], control);
++}
++
++static unsigned long genclk_get_rate(struct clk *clk)
++{
++	u32 control;
++	unsigned long div = 1;
++
++	control = pm_readl(GCCTRL[clk->index]);
++	if (control & PM_BIT(GCCTRL_DIVEN))
++		div = 2 * (PM_BFEXT(GCCTRL_DIV, control) + 1);
++
++	return clk->parent->get_rate(clk->parent) / div;
++}
++
++static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
++{
++	unsigned long	parent_rate;
++	unsigned long	actual_rate;
++	unsigned long	div;
++	u32		control;
++
++	parent_rate = clk->parent->get_rate(clk->parent);
++	control = pm_readl(GCCTRL[clk->index]);
++
++	if (rate > 3 * parent_rate / 4) {
++		actual_rate = parent_rate;
++		control &= ~PM_BIT(GCCTRL_DIVEN);
++	} else {
++		div = (parent_rate + rate) / (2 * rate) - 1;
++		control = PM_BFINS(GCCTRL_DIV, div, control)
++				| PM_BIT(GCCTRL_DIVEN);
++		actual_rate = parent_rate / (2 * (div + 1));
++	}
++
++	pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
++			clk->name, rate, actual_rate);
++
++	if (apply)
++		pm_writel(GCCTRL[clk->index], control);
++
++	return actual_rate;
++}
++
++static int genclk_set_parent(struct clk *clk, struct clk *parent)
++{
++	unsigned int	i;
++	u32		control;
++
++	pr_debug("clk %s: new parent %s (was %s)\n",
++			clk->name, parent->name,
++			clk->parent ? clk->parent->name : "<none>");
++
++	control = pm_readl(GCCTRL[clk->index]);
++
++	for (i = 0; i < ARRAY_SIZE(genclk_parent); i++) {
++		if (parent == genclk_parent[i]) {
++			control = PM_BFINS(GCCTRL_OSCSEL, i, control);
++			break;
++		}
++	}
++
++	if (i >= ARRAY_SIZE(genclk_parent))
++		return -EINVAL;
++
++	pm_writel(GCCTRL[clk->index], control);
++	clk->parent = parent;
++
++	return 0;
++}
++
++#define DEFINE_GCLK(_name, i)				\
++	static struct clk _name = {			\
++		.name		= #_name,		\
++		.mode		= genclk_mode,		\
++		.get_rate	= genclk_get_rate,	\
++		.set_rate	= genclk_set_rate,	\
++		.set_parent	= genclk_set_parent,	\
++		.index		= i,			\
++	}
++
++DEFINE_GCLK(gclk0, 0);
++DEFINE_GCLK(gclk1, 1);
++DEFINE_GCLK(gclk2, 2);
++DEFINE_GCLK(gclk3, 3);
++DEFINE_GCLK(gclk4, 4);
++DEFINE_GCLK(gclk5, 5);
++
++static void __init genclk_init_parent(struct clk *clk)
++{
++	unsigned int	parent;
++	u32		control;
++
++	BUG_ON(clk->index > NR_GENERIC_CLOCKS);
++
++	control = pm_readl(GCCTRL[clk->index]);
++	parent = PM_BFEXT(GCCTRL_OSCSEL, control);
++	if (parent >= ARRAY_SIZE(genclk_parent)) {
++		/* Current parent is invalid. Reset to a sane value */
++		parent = 0;
++		control = PM_BF(GCCTRL_OSCSEL, parent);
++	}
++
++	clk->parent = genclk_parent[parent];
++}
++
++
++/* --------------------------------------------------------------------
++ *  System peripherals
++ * -------------------------------------------------------------------- */
++static struct dw_dma_platform_data dw_dmac0_data = {
++	.nr_channels	= 4,
++};
++static struct pdca_pdata pdca_data = {
++	.nr_channels	= 20,
++};
++
++static struct resource intc_resource[] = {
++	PBMEM(0xffd00000),
++};
++static struct resource pm_resource[] = {
++	PBMEM(0xffd00400),
++	IRQ(10),
++};
++static struct resource sdc_resource[] = {
++	PBMEM(0xffd00800),
++	IRQ(45),
++};
++static struct resource ast0_resource[] = {
++	PBMEM(0xffd00c00),
++	IRQ(11),
++};
++static struct resource ast1_resource[] = {
++	PBMEM(0xffd01000),
++	IRQ(12),
++};
++static struct resource wdt_resource[] = {
++	PBMEM(0xffd01400),
++};
++static struct resource gpio_resource[] = {
++	PBMEM(0xffd02000),
++	{
++		.start	= 16,
++		.end	= 19,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++static struct resource pdca_resource[] = {
++	{
++		.start	= 0xffe00000,
++		.end	= 0xffe01fff,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(1),
++};
++static struct resource smc_resource[] = {
++	PBMEM(0xffe04400),
++};
++static struct resource dw_dmac0_resource[] = {
++	{
++		.start	= 0xff100000,
++		.end	= 0xff1003ff,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(5),
++};
++
++struct platform_device at32_intc0_device = {
++	.name		= "intc",
++	.resource	= intc_resource,
++	.num_resources	= ARRAY_SIZE(intc_resource),
++};
++static struct platform_device pm_device = {
++	.name		= "pm",
++	.resource	= pm_resource,
++	.num_resources	= ARRAY_SIZE(pm_resource),
++};
++static struct platform_device sdc_device = {
++	.name		= "sdc",
++	.resource	= sdc_resource,
++	.num_resources	= ARRAY_SIZE(sdc_resource),
++};
++static struct platform_device ast0_device = {
++	.name		= "rtc-ast",
++	.id		= 0,
++	.resource	= ast0_resource,
++	.num_resources	= ARRAY_SIZE(ast0_resource),
++};
++static struct platform_device ast1_device = {
++	.name		= "timer-ast",
++	.id		= 1,
++	.resource	= ast1_resource,
++	.num_resources	= ARRAY_SIZE(ast1_resource),
++};
++static struct platform_device wdt_device = {
++	.name		= "at32_wdt",
++	.id		= 0,
++	.resource	= wdt_resource,
++	.num_resources	= ARRAY_SIZE(wdt_resource),
++};
++static struct platform_device gpio_device = {
++	.name		= "gpio",
++	.id		= 0,
++	.resource	= gpio_resource,
++	.num_resources	= ARRAY_SIZE(gpio_resource),
++};
++static struct platform_device pdca_device = {
++	.dev.platform_data = &pdca_data,
++	.name		= "atmel_pdca",
++	.id		= 0,
++	.resource	= pdca_resource,
++	.num_resources	= ARRAY_SIZE(pdca_resource),
++};
++static struct platform_device smc_device = {
++	.name		= "smc",
++	.id		= 0,
++	.resource	= smc_resource,
++	.num_resources	= ARRAY_SIZE(smc_resource),
++};
++static struct platform_device dw_dmac0_device = {
++	.dev.platform_data = &dw_dmac0_data,
++	.name		= "dw_dmac",
++	.id		= 0,
++	.resource	= dw_dmac0_resource,
++	.num_resources	= ARRAY_SIZE(dw_dmac0_resource),
++};
++
++DEV_CLK(pclk, at32_intc0, pba, 0);
++DEV_CLK(pclk, pm, pba, 1);
++DEV_CLK(pclk, sdc, pba, 2);
++DEV_CLK(pclk, ast0, pba, 3);
++DEV_CLK(pclk, ast1, pba, 4);
++DEV_CLK(pclk, wdt, pba, 5);
++DEV_CLK(pclk, gpio, pba, 8);
++DEV_CLK(hclk, pdca, hsb, 9);
++DEV_CLK(pclk, pdca, pbb, 0);
++DEV_CLK(pclk, smc, pbb, 5);
++DEV_CLK(hclk, dw_dmac0, hsb, 10);
++
++static struct clk ebi_hclk = {
++	.name		= "ebi_hclk",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= hsb_clk_get_rate,
++	.users		= 1,
++};
++static struct clk hramc_clk = {
++	.name		= "hramc",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= hsb_clk_get_rate,
++	.users		= 1,
++	.index		= 4,
++};
++static struct clk sdramc_clk = {
++	.name		= "sdramc_clk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.users		= 1,
++	.index		= 6,
++};
++
++static int __init system_device_init(void)
++{
++	platform_device_register(&at32_intc0_device);
++	platform_device_register(&pm_device);
++	platform_device_register(&sdc_device);
++	platform_device_register(&ast0_device);
++	platform_device_register(&ast1_device);
++	platform_device_register(&wdt_device);
++	platform_device_register(&gpio_device);
++	platform_device_register(&pdca_device);
++	platform_device_register(&smc_device);
++	platform_device_register(&dw_dmac0_device);
++
++	return 0;
++}
++core_initcall(system_device_init);
++
++/* --------------------------------------------------------------------
++ * HMATRIX
++ * -------------------------------------------------------------------- */
++
++struct clk at32_hmatrix_clk = {
++	.name		= "hmatrix_clk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 8,
++	.users		= 0,
++};
++
++/* --------------------------------------------------------------------
++ *  USART
++ * -------------------------------------------------------------------- */
++
++static struct atmel_uart_data atmel_usart0_data = {
++	.use_dma_tx	= 0,
++	.use_dma_rx	= 0,
++};
++static struct resource atmel_usart0_resource[] = {
++	PBMEM(0xffd03000),
++	IRQ(24),
++};
++static struct platform_device atmel_usart0_device = {
++	.name		= "atmel_usart",
++	.id		= 0,
++	.dev		= {
++		.platform_data	= &atmel_usart0_data,
++	},
++	.resource	= atmel_usart0_resource,
++	.num_resources	= ARRAY_SIZE(atmel_usart0_resource),
++};
++DEV_CLK(usart, atmel_usart0, pba, 9);
++
++static struct atmel_uart_data atmel_usart1_data = {
++	.use_dma_tx	= 0,
++	.use_dma_rx	= 0,
++};
++static struct resource atmel_usart1_resource[] = {
++	PBMEM(0xffd03400),
++	IRQ(25),
++};
++static struct platform_device atmel_usart1_device = {
++	.name		= "atmel_usart",
++	.id		= 1,
++	.dev		= {
++		.platform_data	= &atmel_usart1_data,
++	},
++	.resource	= atmel_usart1_resource,
++	.num_resources	= ARRAY_SIZE(atmel_usart1_resource),
++};
++DEV_CLK(usart, atmel_usart1, pba, 10);
++
++static struct atmel_uart_data atmel_usart2_data = {
++	.use_dma_tx	= 0,
++	.use_dma_rx	= 0,
++};
++static struct resource atmel_usart2_resource[] = {
++	PBMEM(0xffd03800),
++	IRQ(26),
++};
++static struct platform_device atmel_usart2_device = {
++	.name		= "atmel_usart",
++	.id		= 2,
++	.dev		= {
++		.platform_data	= &atmel_usart2_data,
++	},
++	.resource	= atmel_usart2_resource,
++	.num_resources	= ARRAY_SIZE(atmel_usart2_resource),
++};
++DEV_CLK(usart, atmel_usart2, pba, 11);
++
++static struct atmel_uart_data atmel_usart3_data = {
++	.use_dma_tx	= 0,
++	.use_dma_rx	= 0,
++};
++static struct resource atmel_usart3_resource[] = {
++	PBMEM(0xffd03c00),
++	IRQ(27),
++};
++static struct platform_device atmel_usart3_device = {
++	.name		= "atmel_usart",
++	.id		= 3,
++	.dev		= {
++		.platform_data	= &atmel_usart3_data,
++	},
++	.resource	= atmel_usart3_resource,
++	.num_resources	= ARRAY_SIZE(atmel_usart3_resource),
++};
++DEV_CLK(usart, atmel_usart3, pba, 12);
++
++static struct atmel_uart_data atmel_usart4_data = {
++	.use_dma_tx	= 0,
++	.use_dma_rx	= 0,
++};
++static struct resource atmel_usart4_resource[] = {
++	PBMEM(0xffd04000),
++	IRQ(28),
++};
++static struct platform_device atmel_usart4_device = {
++	.name		= "atmel_usart",
++	.id		= 4,
++	.dev		= {
++		.platform_data	= &atmel_usart4_data,
++	},
++	.resource	= atmel_usart4_resource,
++	.num_resources	= ARRAY_SIZE(atmel_usart4_resource),
++};
++DEV_CLK(usart, atmel_usart4, pba, 13);
++
++static struct atmel_uart_data atmel_usart5_data = {
++	.use_dma_tx	= 0,
++	.use_dma_rx	= 0,
++};
++static struct resource atmel_usart5_resource[] = {
++	PBMEM(0xffd04400),
++	IRQ(29),
++};
++static struct platform_device atmel_usart5_device = {
++	.name		= "atmel_usart",
++	.id		= 5,
++	.dev		= {
++		.platform_data	= &atmel_usart5_data,
++	},
++	.resource	= atmel_usart5_resource,
++	.num_resources	= ARRAY_SIZE(atmel_usart5_resource),
++};
++DEV_CLK(usart, atmel_usart5, pba, 14);
++
++static void __init configure_usart0_pins(void)
++{
++	/* RXD | TXD */
++	select_peripheral(PB, (1 << 14) | (1 << 15), PERIPH_B, 0);
++}
++
++static void __init configure_usart1_pins(void)
++{
++	/* TXD | RXD */
++	select_peripheral(PA, (1 << 8) | (1 << 9), PERIPH_A, 0);
++}
++
++static void __init configure_usart2_pins(void)
++{
++	/* TXD | RXD */
++	select_peripheral(PA, (1 << 16) | (1 << 17), PERIPH_A, 0);
++}
++
++static void __init configure_usart3_pins(void)
++{
++	/* RXD | TXD */
++	select_peripheral(PC, (1 << 10) | (1 << 11), PERIPH_A, 0);
++}
++
++static void __init configure_usart4_pins(void)
++{
++	/* TXD | RXD */
++	select_peripheral(PA, (1 << 14) | (1 << 15), PERIPH_A, 0);
++}
++
++static void __init configure_usart5_pins(void)
++{
++	/* RXD | TXD */
++	select_peripheral(PA, (1 << 22) | (1 << 23), PERIPH_A, 0);
++}
++
++static struct platform_device *__initdata at32_usarts[6];
++
++void __init at32_map_usart(unsigned int hw_id, unsigned int line)
++{
++	struct platform_device *pdev;
++
++	switch (hw_id) {
++	case 0:
++		pdev = &atmel_usart0_device;
++		configure_usart0_pins();
++		break;
++	case 1:
++		pdev = &atmel_usart1_device;
++		configure_usart1_pins();
++		break;
++	case 2:
++		pdev = &atmel_usart2_device;
++		configure_usart2_pins();
++		break;
++	case 3:
++		pdev = &atmel_usart3_device;
++		configure_usart3_pins();
++		break;
++	case 4:
++		pdev = &atmel_usart4_device;
++		configure_usart4_pins();
++		break;
++	case 5:
++		pdev = &atmel_usart5_device;
++		configure_usart5_pins();
++		break;
++	default:
++		return;
++	}
++
++	if (PXSEG(pdev->resource[0].start) == P4SEG) {
++		/* Addresses in the P4 segment are permanently mapped 1:1 */
++		struct atmel_uart_data *data = pdev->dev.platform_data;
++		data->regs = (void __iomem __force *)pdev->resource[0].start;
++	}
++
++	pdev->id = line;
++	at32_usarts[line] = pdev;
++}
++
++struct platform_device *__init at32_add_device_usart(unsigned int id)
++{
++	platform_device_register(at32_usarts[id]);
++	return at32_usarts[id];
++}
++
++struct platform_device *atmel_default_console_device;
++
++void __init at32_setup_serial_console(unsigned int usart_id)
++{
++	atmel_default_console_device = at32_usarts[usart_id];
++}
++
++/* --------------------------------------------------------------------
++ *  Ethernet
++ * -------------------------------------------------------------------- */
++
++static u64 macb0_dma_mask = DMA_32BIT_MASK;
++static struct resource macb0_resource[] __initdata = {
++	PBMEM(0xffe04000),
++	IRQ(8),
++};
++static struct clk macb0_hclk = {
++	.name		= "hclk",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= hsb_clk_get_rate,
++	.index		= 8,
++};
++static struct clk macb0_pclk = {
++	.name		= "pclk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 4,
++};
++
++struct platform_device *__init
++at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
++{
++	struct platform_device *pdev;
++	u32 pin_mask_a;
++	u32 pin_mask_c;
++
++	if (id != 0 || !data)
++		return NULL;
++
++	pdev = platform_device_alloc("macb", id);
++	if (!pdev)
++		return NULL;
++
++	if (platform_device_add_resources(pdev, macb0_resource,
++				ARRAY_SIZE(macb0_resource)))
++		goto out_free_pdev;
++
++	if (platform_device_add_data(pdev, data,
++				sizeof(struct eth_platform_data)))
++		goto out_free_pdev;
++
++	pin_mask_a  = (1 << 4);  /* RXDV */
++	pin_mask_c  = (1 << 10); /* MDC  */
++	pin_mask_c |= (1 << 11); /* MDIO */
++	pin_mask_c |= (1 << 12); /* TXCK */
++	pin_mask_c |= (1 << 14); /* RXD0 */
++	pin_mask_c |= (1 << 15); /* RXD1 */
++	pin_mask_c |= (1 << 16); /* RXER */
++	pin_mask_c |= (1 << 18); /* TXEN */
++	pin_mask_c |= (1 << 19); /* TXD0 */
++	pin_mask_c |= (1 << 20); /* TXD1 */
++
++	if (!data->is_rmii) {
++		pin_mask_a |= (1<<0);  /* COL  */
++		pin_mask_a |= (1<<1);  /* RXD2 */
++		pin_mask_a |= (1<<2);  /* RXD3 */
++		pin_mask_a |= (1<<3);  /* RXCK */
++		pin_mask_a |= (1<<5);  /* TXER */
++		pin_mask_a |= (1<<6);  /* TXD2 */
++		pin_mask_a |= (1<<7);  /* TXD3 */
++		pin_mask_c |= (1<<13); /* CRS  */
++		pin_mask_c |= (1<<17); /* SPD  */
++	}
++
++	select_peripheral(PA, pin_mask_a, PERIPH_B, 0);
++	select_peripheral(PC, pin_mask_c, PERIPH_C, 0);
++
++	pdev->dev.dma_mask = &macb0_dma_mask;
++	pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
++
++	macb0_hclk.dev = &pdev->dev;
++	macb0_pclk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++
++	return pdev;
++
++out_free_pdev:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * SPI
++ * -------------------------------------------------------------------- */
++static struct resource atmel_spi_resource[][2] __initdata = {
++	{
++		PBMEM(0xffe05400),
++		IRQ(36),
++	}, {
++		PBMEM(0xffe05800),
++		IRQ(37),
++	}, {
++		PBMEM(0xffe05c00),
++		IRQ(38),
++	}, {
++		PBMEM(0xffe06000),
++		IRQ(39),
++	}
++};
++static struct clk atmel_spi_clk[] = {
++	{
++		.name		= "spi_clk",
++		.parent		= &pbb_clk,
++		.mode		= pbb_clk_mode,
++		.get_rate	= pbb_clk_get_rate,
++		.index		= 9,
++	}, {
++		.name		= "spi_clk",
++		.parent		= &pbb_clk,
++		.mode		= pbb_clk_mode,
++		.get_rate	= pbb_clk_get_rate,
++		.index		= 10,
++	}, {
++		.name		= "spi_clk",
++		.parent		= &pbb_clk,
++		.mode		= pbb_clk_mode,
++		.get_rate	= pbb_clk_get_rate,
++		.index		= 11,
++	}, {
++		.name		= "spi_clk",
++		.parent		= &pbb_clk,
++		.mode		= pbb_clk_mode,
++		.get_rate	= pbb_clk_get_rate,
++		.index		= 12,
++	}
++};
++static int __initdata atmel_spi_pins[][4] = {
++	{
++		/* SPI0 */
++		GPIO_PIN_PB(3), GPIO_PIN_PB(4),
++		GPIO_PIN_PB(5), GPIO_PIN_PB(6),
++	}, {
++		/* SPI1 */
++		GPIO_PIN_PB(4), -1, -1, -1,
++	}, {
++		/* SPI2 */
++		GPIO_PIN_PA(28), -1, -1, -1,
++	}, {
++		/* SPI3 */
++		GPIO_PIN_PA(27), GPIO_PIN_PA(20),
++		GPIO_PIN_PA(29), GPIO_PIN_PA(30),
++	}
++};
++
++
++static void __init at32_spi_setup_dw_dma(unsigned int id,
++		struct atmel_spi_pdata *pdata)
++{
++	struct dw_dma_slave	*rx_dws;
++	struct dw_dma_slave	*tx_dws;
++
++	if (pdata->rx_dma_slave)
++		rx_dws = kmemdup(to_dw_dma_slave(pdata->rx_dma_slave),
++				sizeof(struct dw_dma_slave), GFP_KERNEL);
++	else
++		rx_dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL);
++	if (pdata->tx_dma_slave)
++		tx_dws = kmemdup(to_dw_dma_slave(pdata->tx_dma_slave),
++				sizeof(struct dw_dma_slave), GFP_KERNEL);
++	else
++		tx_dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL);
++
++	rx_dws->slave.dma_dev = tx_dws->slave.dma_dev = &dw_dmac0_device.dev;
++	rx_dws->slave.reg_width = tx_dws->slave.reg_width
++		= DMA_SLAVE_WIDTH_8BIT;
++
++	rx_dws->cfg_hi = DWC_CFGH_SRC_PER(2);
++	tx_dws->cfg_hi = DWC_CFGH_DST_PER(3);
++	rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL
++				| DWC_CFGL_HS_SRC_POL);
++	tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL
++				| DWC_CFGL_HS_SRC_POL);
++
++	pdata->rx_dma_slave = &rx_dws->slave;
++	pdata->tx_dma_slave = &tx_dws->slave;
++}
++
++static void __init at32_spi_setup_pdca(unsigned int id,
++		struct atmel_spi_pdata *pdata)
++{
++	struct pdca_slave	*rx_pslave;
++	struct pdca_slave	*tx_pslave;
++
++	if (pdata->rx_dma_slave)
++		rx_pslave = kmemdup(dma_to_pdca_slave(pdata->rx_dma_slave),
++				sizeof(struct pdca_slave), GFP_KERNEL);
++	else
++		rx_pslave = kzalloc(sizeof(struct pdca_slave), GFP_KERNEL);
++	if (pdata->tx_dma_slave)
++		tx_pslave = kmemdup(dma_to_pdca_slave(pdata->tx_dma_slave),
++				sizeof(struct pdca_slave), GFP_KERNEL);
++	else
++		tx_pslave = kzalloc(sizeof(struct pdca_slave), GFP_KERNEL);
++
++	rx_pslave->slave.dma_dev = &pdca_device.dev;
++	tx_pslave->slave.dma_dev = &pdca_device.dev;
++	rx_pslave->slave.reg_width = DMA_SLAVE_WIDTH_8BIT;
++	tx_pslave->slave.reg_width = DMA_SLAVE_WIDTH_8BIT;
++
++	rx_pslave->tx_periph_id = -1;
++	tx_pslave->rx_periph_id = -1;
++
++	switch (id) {
++	case 1:
++		rx_pslave->rx_periph_id = 6;
++		tx_pslave->tx_periph_id = 17;
++		break;
++	case 2:
++		rx_pslave->rx_periph_id = 7;
++		tx_pslave->tx_periph_id = 18;
++		break;
++	case 3:
++		rx_pslave->rx_periph_id = 8;
++		tx_pslave->tx_periph_id = 19;
++		break;
++	}
++
++	pdata->rx_dma_slave = &rx_pslave->slave;
++	pdata->tx_dma_slave = &tx_pslave->slave;
++}
++
++static void __init
++at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
++		unsigned int n, const int *pins)
++{
++	unsigned int	mode;
++	unsigned int	cs;
++	int		pin;
++
++	for (; n; n--, b++) {
++		b->bus_num = bus_num;
++		cs = b->chip_select;
++		if (cs >= 4 || !gpio_is_valid(pins[cs]))
++			continue;
++
++		pin = (int)b->controller_data;
++		if (!pin || !gpio_is_valid(pin)) {
++			pin = pins[cs];
++			b->controller_data = (void *)pin;
++		}
++
++		mode = AT32_GPIOF_OUTPUT;
++		if (!(b->mode & SPI_CS_HIGH))
++			mode |= AT32_GPIOF_HIGH;
++		at32_select_gpio(pin, mode);
++	}
++}
++
++struct platform_device *__init at32_add_device_spi(unsigned int id,
++		struct spi_board_info *b, unsigned int n)
++{
++	struct atmel_spi_pdata	pdata;
++	struct platform_device	*pdev;
++
++	BUILD_BUG_ON(ARRAY_SIZE(atmel_spi_resource)
++			!= ARRAY_SIZE(atmel_spi_clk));
++
++	if (id >= ARRAY_SIZE(atmel_spi_resource))
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_spi", id);
++	if (!pdev)
++		goto fail;
++
++	if (platform_device_add_resources(pdev, atmel_spi_resource[id],
++				ARRAY_SIZE(atmel_spi_resource[id])))
++		goto fail;
++
++	memset(&pdata, 0, sizeof(struct atmel_spi_pdata));
++
++	if (id == 0)
++		at32_spi_setup_dw_dma(id, &pdata);
++	else
++		at32_spi_setup_pdca(id, &pdata);
++	pdata.rx_dma_slave->dev = pdata.tx_dma_slave->dev = &pdev->dev;
++
++	if (platform_device_add_data(pdev, &pdata,
++				sizeof(struct atmel_spi_pdata)))
++		goto fail;
++
++	switch (id) {
++	case 0:
++		/* pullup MISO so a level is always defined */
++		select_peripheral(PB, (1 << 1), PERIPH_A, AT32_GPIOF_PULLUP);
++		/* MOSI | SCK */
++		select_peripheral(PB, (1 << 0) | (1 << 2), PERIPH_A, 0);
++
++		at32_spi_setup_slaves(0, b, n, atmel_spi_pins[0]);
++		break;
++
++	case 1:
++		/* pullup MISO so a level is always defined */
++		select_peripheral(PB, (1 << 7), PERIPH_B, AT32_GPIOF_PULLUP);
++		/* MOSI | SCK */
++		select_peripheral(PB, (1 << 6) | (1 << 5), PERIPH_B, 0);
++
++		at32_spi_setup_slaves(1, b, n, atmel_spi_pins[1]);
++		break;
++
++	case 2:
++		/* pullup MISO so a level is always defined */
++		select_peripheral(PA, (1 << 30), PERIPH_B, AT32_GPIOF_PULLUP);
++		/* MOSI | SCK */
++		select_peripheral(PA, (1 << 31) || (1 << 29), PERIPH_B, 0);
++
++		at32_spi_setup_slaves(2, b, n, atmel_spi_pins[2]);
++		break;
++
++	case 3:
++		/* pullup MISO so a level is always defined */
++		select_peripheral(PA, (1 << 25), PERIPH_A, AT32_GPIOF_PULLUP);
++		/* MOSI | SCK */
++		select_peripheral(PA, (1 << 24) | (1 << 26), PERIPH_A, 0);
++
++		at32_spi_setup_slaves(3, b, n, atmel_spi_pins[3]);
++		break;
++
++	default:
++		goto fail;
++	}
++
++	atmel_spi_clk[id].dev = &pdev->dev;
++	spi_register_board_info(b, n);
++	platform_device_add(pdev);
++
++	return pdev;
++
++fail:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * MMC
++ * -------------------------------------------------------------------- */
++static struct resource atmel_mci0_resource[] __initdata = {
++	PBMEM(0xfff00000),
++	IRQ(43),
++};
++/* MCI is on the PBC bus, but it is controlled by the PBBMASK register */
++static struct clk atmel_mci0_pclk = {
++	.name		= "mci_clk",
++	.parent		= &pbc_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 16,
++};
++
++struct platform_device *__init
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
++{
++	struct platform_device		*pdev;
++	struct dw_dma_slave		*dws;
++	u32 pin_mask_1 = 0;
++	u32 pin_mask_2 = 0;
++
++	if (id != 0)
++		return NULL;
++
++	/* Must have at least one usable slot */
++	if (!data->slot[0].bus_width && !data->slot[1].bus_width)
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_mci", id);
++	if (!pdev)
++		goto fail;
++
++	if (platform_device_add_resources(pdev, atmel_mci0_resource,
++				ARRAY_SIZE(atmel_mci0_resource)))
++		goto fail;
++
++	if (data->dma_slave)
++		dws = kmemdup(to_dw_dma_slave(data->dma_slave),
++				sizeof(struct dw_dma_slave), GFP_KERNEL);
++	else
++		dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL);
++
++	dws->slave.dev = &pdev->dev;
++	dws->slave.dma_dev = &dw_dmac0_device.dev;
++	dws->slave.reg_width = DMA_SLAVE_WIDTH_32BIT;
++	dws->cfg_hi = (DWC_CFGH_SRC_PER(0)
++				| DWC_CFGH_DST_PER(1));
++	dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL
++				| DWC_CFGL_HS_SRC_POL);
++
++	data->dma_slave = &dws->slave;
++
++	if (platform_device_add_data(pdev, data,
++				sizeof(struct mci_platform_data)))
++		goto fail;
++
++	switch (data->slot[0].bus_width) {
++	case 8:
++		pin_mask_1 |= (1 << 20); /* DATA4 */
++		pin_mask_1 |= (1 << 21); /* DATA5 */
++		pin_mask_1 |= (1 << 22); /* DATA6 */
++		pin_mask_1 |= (1 << 23); /* DATA7 */
++		/* fall through */
++	case 4:
++		pin_mask_2 |= (1 << 19); /* DATA1 */
++		pin_mask_2 |= (1 << 20); /* DATA2 */
++		pin_mask_2 |= (1 << 21); /* DATA3 */
++		/* fall through */
++	case 1:
++		pin_mask_2 |= (1 << 18); /* DATA0 */
++		pin_mask_2 |= (1 << 17); /* CMD   */
++
++		select_peripheral(PA, pin_mask_1, PERIPH_D, AT32_GPIOF_PULLUP);
++		select_peripheral(PB, pin_mask_2, PERIPH_A, AT32_GPIOF_PULLUP);
++		select_peripheral(PB, (1 << 16),  PERIPH_A, 0);	/* CLK */
++
++		if (gpio_is_valid(data->slot[0].detect_pin))
++			at32_select_gpio(data->slot[0].detect_pin, 0);
++		if (gpio_is_valid(data->slot[0].wp_pin))
++			at32_select_gpio(data->slot[0].wp_pin, 0);
++
++		break;
++	case 0:
++		/* Slot is unused */
++		break;
++	default:
++		goto fail;
++	}
++
++	pin_mask_1 = 0;
++
++	switch (data->slot[1].bus_width) {
++	case 8:
++		pin_mask_1 |= (1 << 9); /* DATA7 */
++		pin_mask_1 |= (1 << 8); /* DATA6 */
++		pin_mask_1 |= (1 << 7); /* DATA5 */
++		pin_mask_1 |= (1 << 6); /* DATA4 */
++		/* fall through */
++	case 4:
++		pin_mask_1 |= (1 << 5); /* DATA3 */
++		pin_mask_1 |= (1 << 4); /* DATA2 */
++		pin_mask_1 |= (1 << 3); /* DATA1 */
++		/* fall through */
++	case 1:
++		pin_mask_1 |= (1 << 2); /* DATA0 */
++		pin_mask_1 |= (1 << 1); /* CMD   */
++
++		select_peripheral(PC, pin_mask_1, PERIPH_A, AT32_GPIOF_PULLUP);
++		select_peripheral(PC, (1 << 0),   PERIPH_A, 0);	/* CLK */
++
++		if (gpio_is_valid(data->slot[1].detect_pin))
++			at32_select_gpio(data->slot[1].detect_pin, 0);
++		if (gpio_is_valid(data->slot[1].wp_pin))
++			at32_select_gpio(data->slot[1].wp_pin, 0);
++
++		break;
++	case 0:
++		/* Slot is unused */
++		break;
++	default:
++		goto fail;
++	}
++
++	atmel_mci0_pclk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++	return pdev;
++
++fail:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ *  LCDC
++ * -------------------------------------------------------------------- */
++static u64 atmel_lcdfb0_dma_mask = DMA_32BIT_MASK;
++static struct resource atmel_lcdfb0_resource[] __initdata = {
++	{
++		.start	= 0xff000000,
++		.end	= 0xff000fff,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(3),
++	{
++		/* Placeholder for pre-allocated fb memory */
++		.start	= 0x00000000,
++		.end	= 0x00000000,
++		.flags	= IORESOURCE_MEM,
++	},
++};
++
++static struct clk atmel_lcdfb0_hck1 = {
++	.name		= "hck1",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= hsb_clk_get_rate,
++	.index		= 7,
++};
++static struct clk atmel_lcdfb0_pixclk = {
++	.name		= "lcdc_clk",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 6,
++};
++
++struct platform_device *__init
++at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
++		unsigned long fbmem_start, unsigned long fbmem_len,
++		u64 pin_mask)
++{
++	struct {
++		struct atmel_lcdfb_info	info;
++		struct fb_monspecs	monspecs;
++		struct fb_videomode	modedb[0];
++	} *all_data;
++	struct platform_device	*pdev;
++	unsigned int		data_size;
++	unsigned int		modedb_size;
++	unsigned int		num_resources;
++	int			ret;
++
++	if (id > 0 || !data)
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_lcdfb", id);
++	if (!pdev)
++		return NULL;
++
++	num_resources = ARRAY_SIZE(atmel_lcdfb0_resource);
++	if (fbmem_len) {
++		atmel_lcdfb0_resource[num_resources - 1].start = fbmem_start;
++		atmel_lcdfb0_resource[num_resources - 1].end
++			= fbmem_start + fbmem_len - 1;
++	} else {
++		num_resources--;
++	}
++
++	if (platform_device_add_resources(pdev, atmel_lcdfb0_resource,
++				num_resources))
++		goto error;
++
++	/*
++	 * Allocate all data -- info struct, monspecs and modedb -- in
++	 * a single chunk.
++	 */
++	modedb_size = data->default_monspecs->modedb_len
++			* sizeof(struct fb_videomode);
++	data_size = sizeof(*all_data) + modedb_size;
++	all_data = kmalloc(data_size, GFP_KERNEL);
++	if (!all_data)
++		goto error;
++
++	memcpy(&all_data->info, data, sizeof(struct atmel_lcdfb_info));
++	memcpy(&all_data->monspecs, data->default_monspecs,
++			sizeof(struct fb_monspecs));
++	memcpy(&all_data->modedb, data->default_monspecs->modedb, modedb_size);
++
++	ret = platform_device_add_data(pdev, all_data, data_size);
++	kfree(all_data);
++	if (ret)
++		goto error;
++
++	/*
++	 * Update internal pointers to use memory allocated by
++	 * platform_device_add_data().
++	 */
++	all_data = pdev->dev.platform_data;
++	all_data->info.default_monspecs = &all_data->monspecs;
++	all_data->monspecs.modedb = all_data->modedb;
++
++	select_peripheral(PD, 0x7fffffff,  PERIPH_A, 0);
++
++	pdev->dev.dma_mask = &atmel_lcdfb0_dma_mask;
++	pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
++
++	atmel_lcdfb0_hck1.dev = &pdev->dev;
++	atmel_lcdfb0_pixclk.dev = &pdev->dev;
++
++	clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
++	clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
++
++	platform_device_add(pdev);
++	return pdev;
++
++error:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ *  Media Post-Processor (MPOP)
++ * -------------------------------------------------------------------- */
++
++static u64 atmel_mpopfb0_dma_mask = DMA_32BIT_MASK;
++static struct resource atmel_mpopfb0_resource[] = {
++	{
++		/* Configuration interface */
++		.start	= 0xffe02000,
++		.end	= 0xffe02fff,
++		.flags	= IORESOURCE_MEM,
++	}, {
++		/* Data interface (output) */
++		.start	= 0xf0000000,
++		.end	= 0xf0ffffff,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(4),
++	{
++		/* Placeholder for pre-allocated fb memory */
++		.start	= 0x00000000,
++		.end	= 0x00000000,
++		.flags	= IORESOURCE_MEM,
++	},
++};
++
++static struct clk atmel_mpopfb0_hclk = {
++	.name		= "hclk",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= hsb_clk_get_rate,
++	.index		= 12,
++};
++static struct clk atmel_mpopfb0_pclk = {
++	.name		= "pclk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 2,
++};
++
++struct platform_device *__init at32_add_device_mpop(unsigned int id,
++		struct platform_device *lcdc_pdev,
++		unsigned long fbmem_start, unsigned long fbmem_len)
++{
++	struct platform_device		*pdev;
++	struct atmel_mpopfb_info	info;
++	unsigned int			num_resources;
++
++	if (id != 0)
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_mpopfb", id);
++	if (!pdev)
++		return NULL;
++
++	num_resources = ARRAY_SIZE(atmel_mpopfb0_resource);
++	if (fbmem_len) {
++		atmel_mpopfb0_resource[num_resources - 1].start = fbmem_start;
++		atmel_mpopfb0_resource[num_resources - 1].end
++			= fbmem_start + fbmem_len - 1;
++	} else {
++		num_resources--;
++	}
++	if (platform_device_add_resources(pdev, atmel_mpopfb0_resource,
++				num_resources))
++		goto error;
++
++	info.lcdc_pdev = lcdc_pdev;
++	if (platform_device_add_data(pdev, &info, sizeof(info)))
++		goto error;
++
++	pdev->dev.dma_mask = &atmel_mpopfb0_dma_mask;
++	pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
++
++	atmel_mpopfb0_hclk.dev = &pdev->dev;
++	atmel_mpopfb0_pclk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++	return pdev;
++
++error:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* -------------------------------------------------------------------
++ *  USB Host (OHCI/EHCI)
++ * ------------------------------------------------------------------- */
++
++static u64 usbh_dma_mask = DMA_32BIT_MASK;
++
++static unsigned long parent_clk_get_rate(struct clk *clk)
++{
++	return clk->parent->get_rate(clk->parent);
++}
++
++static void parent_clk_mode(struct clk *clk, int enabled)
++{
++	/* Parent clk enabled by clk core */
++}
++
++/*
++ * The UTMI clock is an internally controlled PLL. It is hardwired to
++ * OSC2 and will run at 30 MHz or 60 MHz depending on the internal
++ * UTMI <-> host controller data bus width.
++ *
++ * We can turn it on and off through the Power Manager. That's all.
++ */
++static void utmi_clk_mode(struct clk *clk, int enabled)
++{
++	u32 ppcr = pm_readl(PPCR);
++
++	if (enabled)
++		/* Clear UTMI suspend signal */
++		ppcr |= PM_BIT(PPCR_UTMI_CTRL);
++	else
++		/* Set UTMI suspend signal */
++		ppcr &= ~PM_BIT(PPCR_UTMI_CTRL);
++
++	pm_writel(PPCR, ppcr | PM_BF(PPCR_KEY, 0x55));
++	pm_writel(PPCR, ppcr | PM_BF(PPCR_KEY, 0xaa));
++
++	if (enabled)
++		/* PLL startup time is 2.5 ms */
++		udelay(2500);
++}
++
++static unsigned long utmi_clk_get_rate(struct clk *clk)
++{
++	/*
++	 * Not sure about this, but I think the UTMI interface on
++	 * AP7200 is 16 bits wide, which means 30 MHz PHY clock.
++	 */
++	return 30000000;
++}
++
++static struct clk usbh_utmi_clk = {
++	.name		= "usbh_utmi_clk",
++	.parent		= &osc2,
++	.mode		= utmi_clk_mode,
++	.get_rate	= utmi_clk_get_rate,
++};
++
++static struct clk usbh_hclk = {
++	.name		= "usbh_hclk",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= hsb_clk_get_rate,
++	.index		= 6,
++};
++
++/*
++ * UTMI and HSB clocks are shared between OHCI and EHCI. These wrappers
++ * make sure both can use the clocks as if they had their own.
++ */
++static struct clk ohci_utmi_clk = {
++	.name		= "utmi_clk",
++	.parent		= &usbh_utmi_clk,
++	.mode		= parent_clk_mode,
++	.get_rate	= parent_clk_get_rate,
++};
++static struct clk ohci_hclk = {
++	.name		= "hclk",
++	.parent		= &usbh_hclk,
++	.mode		= parent_clk_mode,
++	.get_rate	= parent_clk_get_rate,
++};
++
++static struct clk ehci_utmi_clk = {
++	.name		= "utmi_clk",
++	.parent		= &usbh_utmi_clk,
++	.mode		= parent_clk_mode,
++	.get_rate	= parent_clk_get_rate,
++};
++static struct clk ehci_hclk = {
++	.name		= "hclk",
++	.parent		= &usbh_hclk,
++	.mode		= parent_clk_mode,
++	.get_rate	= parent_clk_get_rate,
++};
++
++/*
++ * The USBH needs both a 48 MHz and a 12 MHz clock, and the 12 MHz
++ * must be generated by dividing the 48 MHz clock. There's only one
++ * generic clock hooked up to the USBH which we must use to generate
++ * both.
++ *
++ * This can be done because GCLK0 generates an additional "divided
++ * clock", which is the normal clock output further divided by four
++ * (this is hardcoded, but not surprisingly, exactly what we need.)
++ *
++ * So we generate the clocks as follows:
++ *    OSC2 (12 MHz) -> PLL2 (48 MHz) --> GCLK0 undivided (48 MHz)
++ *                                   |-> GCLK0 divided (12 MHz)
++ *
++ * This clock is only used by the OHCI part of the controller, not the
++ * EHCI part.
++ */
++static struct clk ohci_gclk = {
++	.name		= "ohci_clk",
++	.parent		= &gclk0,
++	.mode		= parent_clk_mode,
++	.get_rate	= parent_clk_get_rate,
++};
++
++static struct resource usbh_ohci_resource[] __initdata = {
++	{
++		.start	= 0xff400000,
++		.end	= 0xff400400,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(7),
++};
++
++static struct resource usbh_ehci_resource[] __initdata = {
++	{
++		.start	= 0xff300000,
++		.end	= 0xff300400,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(7),
++};
++
++static void __init usbh_setup_pins(void)
++{
++	static bool already_done __initdata;
++
++	if (!already_done) {
++		already_done = true;
++		/* OC_EN_N | OC_FLAG_N */
++		select_peripheral(PA, (1 << 18) | (1 << 19), PERIPH_D, 0);
++	}
++}
++
++struct platform_device *__init at32_add_device_ohci(unsigned int id)
++{
++	struct platform_device *pdev;
++
++	if (id != 0)
++		return NULL;
++
++	pdev = platform_device_alloc("ohci", id);
++	if (!pdev)
++		goto error;
++
++	if (platform_device_add_resources(pdev, usbh_ohci_resource,
++				ARRAY_SIZE(usbh_ohci_resource)))
++		goto error;
++
++	pdev->dev.dma_mask = &usbh_dma_mask;
++	pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
++
++	clk_set_parent(&pll2, &osc2);
++	if (clk_round_rate(&pll2, 48000000) != 48000000) {
++		pr_debug("USBH OHCI: Cannot generate 48 MHz clock\n");
++		goto error;
++	}
++	clk_set_rate(&pll2, 48000000);
++
++	clk_set_parent(&gclk0, &pll2);
++	clk_set_rate(&gclk0, 48000000);
++
++	ohci_utmi_clk.dev = &pdev->dev;
++	ohci_hclk.dev = &pdev->dev;
++	ohci_gclk.dev = &pdev->dev;
++
++	usbh_setup_pins();
++
++	platform_device_add(pdev);
++	return pdev;
++
++error:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++struct platform_device *__init at32_add_device_ehci(unsigned int id)
++{
++	struct platform_device *pdev;
++
++	if (id != 0)
++		return NULL;
++
++	pdev = platform_device_alloc("ehci", id);
++	if (!pdev)
++		goto error;
++
++	if (platform_device_add_resources(pdev, usbh_ehci_resource,
++				ARRAY_SIZE(usbh_ehci_resource)))
++		goto error;
++
++	pdev->dev.dma_mask = &usbh_dma_mask;
++	pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
++
++	ehci_utmi_clk.dev = &pdev->dev;
++	ehci_hclk.dev = &pdev->dev;
++
++	usbh_setup_pins();
++
++	platform_device_add(pdev);
++	return pdev;
++
++error:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* -------------------------------------------------------------------
++ *  NAND Flash / SmartMedia
++ * ------------------------------------------------------------------- */
++static struct resource smc_cs3_resource[] __initdata = {
++	{
++		.start	= 0x24000000,
++		.end	= 0x27ffffff,
++		.flags	= IORESOURCE_MEM,
++	}, {
++		.start	= 0xffe04c00,
++		.end	= 0xffe04fff,
++		.flags	= IORESOURCE_MEM,
++	},
++};
++
++struct platform_device *__init
++at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
++{
++	struct platform_device *pdev;
++
++	if (id != 0 || !data)
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_nand", id);
++	if (!pdev)
++		goto error;
++
++	if (platform_device_add_resources(pdev, smc_cs3_resource,
++				ARRAY_SIZE(smc_cs3_resource)))
++		goto error;
++
++	if (platform_device_add_data(pdev, data,
++				sizeof(struct atmel_nand_data)))
++		goto error;
++
++	hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_NAND_ENABLE);
++
++	/* NANDOE | NANDWE */
++	select_peripheral(PF, (1 << 0) | (1 << 1), PERIPH_A, 0);
++
++	if (gpio_is_valid(data->enable_pin))
++		at32_select_gpio(data->enable_pin,
++				AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
++	if (gpio_is_valid(data->det_pin))
++		at32_select_gpio(data->det_pin, 0);
++	if (gpio_is_valid(data->rdy_pin))
++		at32_select_gpio(data->rdy_pin, 0);
++
++	platform_device_add(pdev);
++	return pdev;
++
++error:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* -------------------------------------------------------------------
++ * Clock list
++ * ------------------------------------------------------------------- */
++static __initdata struct clk *init_clocks[] = {
++	&rcosc,
++	&osc0,
++	&osc1,
++	&osc2,
++	&osc32,
++	&pll0,
++	&pll1,
++	&pll2,
++	&cpu_clk,
++	&hsb_clk,
++	&pba_clk,
++	&pbb_clk,
++	&pbc_clk,
++	&gclk0,
++	&gclk1,
++	&gclk2,
++	&gclk3,
++	&gclk4,
++	&gclk5,
++	&at32_intc0_pclk,
++	&pm_pclk,
++	&sdc_pclk,
++	&ast0_pclk,
++	&ast1_pclk,
++	&wdt_pclk,
++	&gpio_pclk,
++	&pdca_hclk,
++	&pdca_pclk,
++	&ebi_hclk,
++	&hramc_clk,
++	&smc_pclk,
++	&sdramc_clk,
++	&dw_dmac0_hclk,
++	&atmel_usart0_usart,
++	&atmel_usart1_usart,
++	&atmel_usart2_usart,
++	&atmel_usart3_usart,
++	&atmel_usart4_usart,
++	&atmel_usart5_usart,
++	&atmel_spi_clk[0],
++	&atmel_spi_clk[1],
++	&atmel_spi_clk[2],
++	&atmel_spi_clk[3],
++	&macb0_hclk,
++	&macb0_pclk,
++	&atmel_mci0_pclk,
++	&atmel_lcdfb0_hck1,
++	&atmel_lcdfb0_pixclk,
++	&atmel_mpopfb0_hclk,
++	&atmel_mpopfb0_pclk,
++	&usbh_utmi_clk,
++	&usbh_hclk,
++	&ohci_utmi_clk,
++	&ohci_hclk,
++	&ohci_gclk,
++	&ehci_utmi_clk,
++	&ehci_hclk,
++};
++
++static void pll_init_parent(struct clk *pll)
++{
++	u32 ctrl;
++
++	ctrl = pm_readl(PLL[pll->index]);
++	switch (PM_BFEXT(PLLx_PLLOSC, ctrl)) {
++	case 0:
++		pll->parent = &osc0;
++		break;
++	case 1:
++		pll->parent = &osc1;
++		break;
++	case 2:
++		pll->parent = &osc2;
++		break;
++	}
++}
++
++static void ap7200_power_off(void)
++{
++	/*
++	 * Clear all wakeup events so that we don't wake up
++	 * immediately after we shut down.
++	 */
++	sdc_writel(ECR, ~0UL);
++	sdc_readl(STATUS);
++	asm volatile("sleep %0; sub pc, -2"
++			:: "i"(CPU_SLEEP_SHUTDOWN)
++			: "memory");
++}
++
++void __init setup_platform(void)
++{
++	unsigned int	i;
++	u32		cpu_mask;
++	u32		hsb_mask;
++	u32		pba_mask;
++	u32		pbb_mask;
++
++	switch (PM_BFEXT(MCCTRL_MCSEL, pm_readl(MCCTRL))) {
++	case 0:
++		main_clock = &rcosc;
++		break;
++	case 1:
++		main_clock = &osc0;
++		break;
++	case 2:
++		main_clock = &pll0;
++		break;
++	}
++
++	cpu_clk.parent = main_clock;
++
++	pll_init_parent(&pll0);
++	pll_init_parent(&pll1);
++	pll_init_parent(&pll2);
++
++	genclk_init_parent(&gclk0);
++	genclk_init_parent(&gclk1);
++	genclk_init_parent(&gclk2);
++	genclk_init_parent(&gclk3);
++	genclk_init_parent(&gclk4);
++	genclk_init_parent(&gclk5);
++	genclk_init_parent(&atmel_lcdfb0_pixclk);
++
++	/*
++	 * Turn on all clocks that have at least one user already, and
++	 * turn off everything else. We only do this for module
++	 * clocks, and even though it isn't particularly pretty to
++	 * check the address of the mode function, it should do the
++	 * trick...
++	 */
++	cpu_mask = 0x10003;
++	hsb_mask = pba_mask = pbb_mask = 0;
++
++	/* Make sure we don't disable the power manager or the SDRAM */
++	pm_pclk.users = 1;
++	pm_pclk.parent->users = 1;
++	ebi_hclk.users = 1;
++
++	/* Can't recursively call clk_enable() from any of the clk ops */
++	sdc_pclk.users = 1;
++
++	for (i = 0; i < ARRAY_SIZE(init_clocks); i++) {
++		struct clk *clk = init_clocks[i];
++
++		/* first, register clock */
++		at32_clk_register(clk);
++
++		if (clk->users == 0)
++			continue;
++
++		if (clk->mode == &cpu_clk_mode)
++			cpu_mask |= 1 << clk->index;
++		else if (clk->mode == &hsb_clk_mode)
++			hsb_mask |= 1 << clk->index;
++		else if (clk->mode == &pba_clk_mode)
++			pba_mask |= 1 << clk->index;
++		else if (clk->mode == &pbb_clk_mode)
++			pbb_mask |= 1 << clk->index;
++	}
++
++	pm_writel(CPUMASK, cpu_mask);
++	pm_writel(HSBMASK, hsb_mask);
++	pm_writel(PBAMASK, pba_mask);
++	pm_writel(PBBMASK, pbb_mask);
++
++	at32_gpio_init(&gpio_device);
++
++	/* Enter shutdown mode when powering off. This happens very
++	 * early, so board code may still override this. */
++	pm_power_off = ap7200_power_off;
++
++	/* Enable WAKE pin */
++	sdc_writel(CTRL, SDC_BIT(CTRL_PIN_EN) | SDC_BIT(CTRL_AST_EN)
++			| SDC_BIT(CTRL_OCD_EN) | SDC_BIT(CTRL_JTAG_EN)
++			| SDC_BF(CTRL_KEY, 0x55));
++	sdc_writel(CTRL, SDC_BIT(CTRL_PIN_EN) | SDC_BIT(CTRL_AST_EN)
++			| SDC_BIT(CTRL_OCD_EN) | SDC_BIT(CTRL_JTAG_EN)
++			| SDC_BF(CTRL_KEY, 0xaa));
++}
++
++void __init platform_time_init(void)
++{
++	ast_time_init(&ast1_device, AST_CLOCK_PB);
++}
++
++unsigned long at32_get_reset_cause(void)
++{
++	return pm_readl(RCAUSE);
++}
++
++struct gen_pool *sram_pool;
++
++static int __init sram_init(void)
++{
++	struct gen_pool *pool;
++
++	/* 1KiB granularity */
++	pool = gen_pool_create(10, -1);
++	if (!pool)
++		goto fail;
++
++	if (gen_pool_add(pool, 0x08000000, 0x10000, -1))
++		goto err_pool_add;
++
++	sram_pool = pool;
++	return 0;
++
++err_pool_add:
++	gen_pool_destroy(pool);
++fail:
++	pr_err("Failed to create SRAM pool\n");
++	return -ENOMEM;
++}
++core_initcall(sram_init);
+diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
+index 6c27dda..05877d6 100644
+--- a/arch/avr32/mach-at32ap/clock.c
++++ b/arch/avr32/mach-at32ap/clock.c
+@@ -15,24 +15,40 @@
+ #include <linux/err.h>
+ #include <linux/device.h>
+ #include <linux/string.h>
++#include <linux/list.h>
+ 
+ #include <mach/chip.h>
+ 
+ #include "clock.h"
+ 
++/* at32 clock list */
++static LIST_HEAD(at32_clock_list);
++
+ static DEFINE_SPINLOCK(clk_lock);
++static DEFINE_SPINLOCK(clk_list_lock);
++
++void at32_clk_register(struct clk *clk)
++{
++	spin_lock(&clk_list_lock);
++	/* add the new item to the end of the list */
++	list_add_tail(&clk->list, &at32_clock_list);
++	spin_unlock(&clk_list_lock);
++}
+ 
+ struct clk *clk_get(struct device *dev, const char *id)
+ {
+-	int i;
++	struct clk *clk;
+ 
+-	for (i = 0; i < at32_nr_clocks; i++) {
+-		struct clk *clk = at32_clock_list[i];
++	spin_lock(&clk_list_lock);
+ 
+-		if (clk->dev == dev && strcmp(id, clk->name) == 0)
++	list_for_each_entry(clk, &at32_clock_list, list) {
++		if (clk->dev == dev && strcmp(id, clk->name) == 0) {
++			spin_unlock(&clk_list_lock);
+ 			return clk;
++		}
+ 	}
+ 
++	spin_unlock(&clk_list_lock);
+ 	return ERR_PTR(-ENOENT);
+ }
+ EXPORT_SYMBOL(clk_get);
+@@ -162,7 +178,11 @@ EXPORT_SYMBOL(clk_get_parent);
+ #include <linux/io.h>
+ #include <linux/debugfs.h>
+ #include <linux/seq_file.h>
+-#include "pm.h"
++#if defined(CONFIG_CPU_AT32AP700X)
++# include "pm-v1.h"
++#elif defined(CONFIG_CPU_AT32AP720X)
++# include "pm-v3.h"
++#endif
+ 
+ 
+ #define	NEST_DELTA	2
+@@ -203,8 +223,8 @@ dump_clock(struct clk *parent, struct clkinf *r)
+ 
+ 	/* cost of this scan is small, but not linear... */
+ 	r->nest = nest + NEST_DELTA;
+-	for (i = 3; i < at32_nr_clocks; i++) {
+-		clk = at32_clock_list[i];
++
++	list_for_each_entry(clk, &at32_clock_list, list) {
+ 		if (clk->parent == parent)
+ 			dump_clock(clk, r);
+ 	}
+@@ -215,33 +235,76 @@ static int clk_show(struct seq_file *s, void *unused)
+ {
+ 	struct clkinf	r;
+ 	int		i;
++	struct clk 	*clk;
+ 
+ 	/* show all the power manager registers */
+-	seq_printf(s, "MCCTRL  = %8x\n", pm_readl(MCCTRL));
+-	seq_printf(s, "CKSEL   = %8x\n", pm_readl(CKSEL));
+-	seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPU_MASK));
+-	seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSB_MASK));
+-	seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBA_MASK));
+-	seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBB_MASK));
+-	seq_printf(s, "PLL0    = %8x\n", pm_readl(PLL0));
+-	seq_printf(s, "PLL1    = %8x\n", pm_readl(PLL1));
+-	seq_printf(s, "IMR     = %8x\n", pm_readl(IMR));
++	seq_printf(s, "MCCTRL     = %8x\n", pm_readl(MCCTRL));
++	seq_printf(s, "CKSEL      = %8x\n", pm_readl(CKSEL));
++#ifdef CONFIG_CPU_AT32AP700X
++	seq_printf(s, "CPUMASK    = %8x\n", pm_readl(CPU_MASK));
++	seq_printf(s, "HSBMASK    = %8x\n", pm_readl(HSB_MASK));
++	seq_printf(s, "PBAMASK    = %8x\n", pm_readl(PBA_MASK));
++	seq_printf(s, "PBBMASK    = %8x\n", pm_readl(PBB_MASK));
++	seq_printf(s, "PLL0       = %8x\n", pm_readl(PLL0));
++	seq_printf(s, "PLL1       = %8x\n", pm_readl(PLL1));
++#else
++	seq_printf(s, "CPUMASK    = %8x\n", pm_readl(CPUMASK));
++	seq_printf(s, "HSBMASK    = %8x\n", pm_readl(HSBMASK));
++	seq_printf(s, "PBAMASK    = %8x\n", pm_readl(PBAMASK));
++	seq_printf(s, "PBBMASK    = %8x\n", pm_readl(PBBMASK));
++	seq_printf(s, "PBADIVMASK = %8x\n", pm_readl(PBADIVMASK));
++	seq_printf(s, "PBBDIVMASK = %8x\n", pm_readl(PBBDIVMASK));
++	seq_printf(s, "PLL0       = %8x\n", pm_readl(PLL[0]));
++	seq_printf(s, "PLL1       = %8x\n", pm_readl(PLL[1]));
++	seq_printf(s, "PLL2       = %8x\n", pm_readl(PLL[2]));
++	seq_printf(s, "OSCCTRL0   = %8x\n", pm_readl(OSCCTRL[0]));
++	seq_printf(s, "OSCCTRL1   = %8x\n", pm_readl(OSCCTRL[1]));
++	seq_printf(s, "OSCCTRL2   = %8x\n", pm_readl(OSCCTRL[2]));
++	seq_printf(s, "POSCSR     = %8x\n", pm_readl(POSCSR));
++	seq_printf(s, "PPCR       = %8x\n", pm_readl(PPCR));
++#endif
++	seq_printf(s, "IMR        = %8x\n", pm_readl(IMR));
+ 	for (i = 0; i < 8; i++) {
+ 		if (i == 5)
+ 			continue;
+-		seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL(i)));
++#ifdef CONFIG_CPU_AT32AP700X
++		seq_printf(s, "GCCTRL%d    = %8x\n", i, pm_readl(GCCTRL(i)));
++#else
++		seq_printf(s, "GCCTRL%d    = %8x\n", i, pm_readl(GCCTRL[i]));
++#endif
+ 	}
+ 
+ 	seq_printf(s, "\n");
+ 
+-	/* show clock tree as derived from the three oscillators
+-	 * we "know" are at the head of the list
+-	 */
+ 	r.s = s;
+ 	r.nest = 0;
+-	dump_clock(at32_clock_list[0], &r);
+-	dump_clock(at32_clock_list[1], &r);
+-	dump_clock(at32_clock_list[2], &r);
++	/* protected from changes on the list while dumping */
++	spin_lock(&clk_list_lock);
++
++	/* show clock tree as derived from the three oscillators */
++	clk = clk_get(NULL, "osc32k");
++	dump_clock(clk, &r);
++	clk_put(clk);
++
++	clk = clk_get(NULL, "osc0");
++	dump_clock(clk, &r);
++	clk_put(clk);
++
++	clk = clk_get(NULL, "osc1");
++	dump_clock(clk, &r);
++	clk_put(clk);
++
++#ifdef CONFIG_CPU_AT32AP720X
++	clk = clk_get(NULL, "osc2");
++	dump_clock(clk, &r);
++	clk_put(clk);
++
++	clk = clk_get(NULL, "rcosc");
++	dump_clock(clk, &r);
++	clk_put(clk);
++#endif
++
++	spin_unlock(&clk_list_lock);
+ 
+ 	return 0;
+ }
+diff --git a/arch/avr32/mach-at32ap/clock.h b/arch/avr32/mach-at32ap/clock.h
+index bb8e1f2..623bf0e 100644
+--- a/arch/avr32/mach-at32ap/clock.h
++++ b/arch/avr32/mach-at32ap/clock.h
+@@ -12,8 +12,13 @@
+  * published by the Free Software Foundation.
+  */
+ #include <linux/clk.h>
++#include <linux/list.h>
++
++
++void at32_clk_register(struct clk *clk);
+ 
+ struct clk {
++	struct list_head list;		/* linking element */
+ 	const char	*name;		/* Clock name/function */
+ 	struct device	*dev;		/* Device the clock is used by */
+ 	struct clk	*parent;	/* Parent clock, if any */
+@@ -25,6 +30,3 @@ struct clk {
+ 	u16		users;		/* Enabled if non-zero */
+ 	u16		index;		/* Sibling index */
+ };
+-
+-extern struct clk *at32_clock_list[];
+-extern unsigned int at32_nr_clocks;
+diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/arch/avr32/mach-at32ap/cpufreq.c
+index 5dd8d25..4cabc76 100644
+--- a/arch/avr32/mach-at32ap/cpufreq.c
++++ b/arch/avr32/mach-at32ap/cpufreq.c
+@@ -40,6 +40,9 @@ static unsigned int at32_get_speed(unsigned int cpu)
+ 	return (unsigned int)((clk_get_rate(cpuclk) + 500) / 1000);
+ }
+ 
++static unsigned int	ref_freq;
++static unsigned long	loops_per_jiffy_ref;
++
+ static int at32_set_target(struct cpufreq_policy *policy,
+ 			  unsigned int target_freq,
+ 			  unsigned int relation)
+@@ -61,8 +64,19 @@ static int at32_set_target(struct cpufreq_policy *policy,
+ 	freqs.cpu = 0;
+ 	freqs.flags = 0;
+ 
++	if (!ref_freq) {
++		ref_freq = freqs.old;
++		loops_per_jiffy_ref = boot_cpu_data.loops_per_jiffy;
++	}
++
+ 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
++	if (freqs.old < freqs.new)
++		boot_cpu_data.loops_per_jiffy = cpufreq_scale(
++				loops_per_jiffy_ref, ref_freq, freqs.new);
+ 	clk_set_rate(cpuclk, freq);
++	if (freqs.new < freqs.old)
++		boot_cpu_data.loops_per_jiffy = cpufreq_scale(
++				loops_per_jiffy_ref, ref_freq, freqs.new);
+ 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ 
+ 	pr_debug("cpufreq: set frequency %lu Hz\n", freq);
+diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c
+index c36a6d5..b6870b5 100644
+--- a/arch/avr32/mach-at32ap/extint.c
++++ b/arch/avr32/mach-at32ap/extint.c
+@@ -17,6 +17,8 @@
+ 
+ #include <asm/io.h>
+ 
++#include <mach/cpu.h>
++
+ /* EIC register offsets */
+ #define EIC_IER					0x0000
+ #define EIC_IDR					0x0004
+@@ -26,24 +28,18 @@
+ #define EIC_MODE				0x0014
+ #define EIC_EDGE				0x0018
+ #define EIC_LEVEL				0x001c
++
++/* This is only valid on v1 (AP700x) */
+ #define EIC_NMIC				0x0024
++# define EIC_NMIC_ENABLE			(1 << 0)
+ 
+-/* Bitfields in NMIC */
+-#define EIC_NMIC_ENABLE				(1 << 0)
+-
+-/* Bit manipulation macros */
+-#define EIC_BIT(name)					\
+-	(1 << EIC_##name##_OFFSET)
+-#define EIC_BF(name,value)				\
+-	(((value) & ((1 << EIC_##name##_SIZE) - 1))	\
+-	 << EIC_##name##_OFFSET)
+-#define EIC_BFEXT(name,value)				\
+-	(((value) >> EIC_##name##_OFFSET)		\
+-	 & ((1 << EIC_##name##_SIZE) - 1))
+-#define EIC_BFINS(name,value,old)			\
+-	(((old) & ~(((1 << EIC_##name##_SIZE) - 1)	\
+-		    << EIC_##name##_OFFSET))		\
+-	 | EIC_BF(name,value))
++/* These are only valid on v3 (AP720x) */
++#define EIC_FILTER				0x0020
++#define EIC_TEST				0x0024
++#define EIC_ASYNC				0x0028
++#define EIC_EN					0x0030
++#define EIC_DIS					0x0034
++#define EIC_CTRL				0x0038
+ 
+ /* Register access macros */
+ #define eic_readl(port,reg)				\
+@@ -60,36 +56,68 @@ struct eic {
+ static struct eic *nmi_eic;
+ static bool nmi_enabled;
+ 
++static inline int eic_version(struct eic *eic)
++{
++	if (cpu_is_at32ap7000())
++		return 1;
++	if (cpu_is_at32ap7200())
++		return 3;
++
++	BUG();
++}
++
++static inline int eic_irq_bitmask(struct eic *eic, unsigned int irq)
++{
++	irq -= eic->first_irq;
++
++	if (eic_version(eic) > 2)
++		irq++;
++	return 1 << irq;
++}
++
+ static void eic_ack_irq(unsigned int irq)
+ {
+ 	struct eic *eic = get_irq_chip_data(irq);
+-	eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
++	eic_writel(eic, ICR, eic_irq_bitmask(eic, irq));
+ }
+ 
+ static void eic_mask_irq(unsigned int irq)
+ {
+ 	struct eic *eic = get_irq_chip_data(irq);
+-	eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
++	eic_writel(eic, IDR, eic_irq_bitmask(eic, irq));
+ }
+ 
+ static void eic_mask_ack_irq(unsigned int irq)
+ {
+ 	struct eic *eic = get_irq_chip_data(irq);
+-	eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
+-	eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
++	eic_writel(eic, ICR, eic_irq_bitmask(eic, irq));
++	eic_writel(eic, IDR, eic_irq_bitmask(eic, irq));
+ }
+ 
+ static void eic_unmask_irq(unsigned int irq)
+ {
+ 	struct eic *eic = get_irq_chip_data(irq);
+-	eic_writel(eic, IER, 1 << (irq - eic->first_irq));
++	eic_writel(eic, IER, eic_irq_bitmask(eic, irq));
++}
++
++/* The following two hooks are only used on v2+ controllers */
++static void eic_enable_irq(unsigned int irq)
++{
++	struct eic *eic = get_irq_chip_data(irq);
++	eic_writel(eic, EN, eic_irq_bitmask(eic, irq));
++}
++
++static void eic_disable_irq(unsigned int irq)
++{
++	struct eic *eic = get_irq_chip_data(irq);
++	eic_writel(eic, DIS, eic_irq_bitmask(eic, irq));
+ }
+ 
+ static int eic_set_irq_type(unsigned int irq, unsigned int flow_type)
+ {
+ 	struct eic *eic = get_irq_chip_data(irq);
+ 	struct irq_desc *desc;
+-	unsigned int i = irq - eic->first_irq;
++	unsigned int irq_bitmask = eic_irq_bitmask(eic, irq);
+ 	u32 mode, edge, level;
+ 	int ret = 0;
+ 
+@@ -105,20 +133,20 @@ static int eic_set_irq_type(unsigned int irq, unsigned int flow_type)
+ 
+ 	switch (flow_type) {
+ 	case IRQ_TYPE_LEVEL_LOW:
+-		mode |= 1 << i;
+-		level &= ~(1 << i);
++		mode |= irq_bitmask;
++		level &= ~irq_bitmask;
+ 		break;
+ 	case IRQ_TYPE_LEVEL_HIGH:
+-		mode |= 1 << i;
+-		level |= 1 << i;
++		mode |= irq_bitmask;
++		level |= irq_bitmask;
+ 		break;
+ 	case IRQ_TYPE_EDGE_RISING:
+-		mode &= ~(1 << i);
+-		edge |= 1 << i;
++		mode &= ~irq_bitmask;
++		edge |= irq_bitmask;
+ 		break;
+ 	case IRQ_TYPE_EDGE_FALLING:
+-		mode &= ~(1 << i);
+-		edge &= ~(1 << i);
++		mode &= ~irq_bitmask;
++		edge &= ~irq_bitmask;
+ 		break;
+ 	default:
+ 		ret = -EINVAL;
+@@ -160,6 +188,11 @@ static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
+ 	status = eic_readl(eic, ISR);
+ 	pending = status & eic_readl(eic, IMR);
+ 
++	if (eic_version(eic) > 1) {
++		status >>= 1;
++		pending >>= 1;
++	}
++
+ 	while (pending) {
+ 		i = fls(pending) - 1;
+ 		pending &= ~(1 << i);
+@@ -172,16 +205,34 @@ int nmi_enable(void)
+ {
+ 	nmi_enabled = true;
+ 
+-	if (nmi_eic)
+-		eic_writel(nmi_eic, NMIC, EIC_NMIC_ENABLE);
++	if (nmi_eic) {
++		if (eic_version(nmi_eic) > 2) {
++			eic_writel(nmi_eic, EN, 1 << 0);
++			eic_writel(nmi_eic, IER, 1 << 0);
++		} else if (eic_version(nmi_eic) > 1) {
++			eic_writel(nmi_eic, EN, 1 << 8);
++			eic_writel(nmi_eic, IER, 1 << 8);
++		} else {
++			eic_writel(nmi_eic, NMIC, EIC_NMIC_ENABLE);
++		}
++	}
+ 
+ 	return 0;
+ }
+ 
+ void nmi_disable(void)
+ {
+-	if (nmi_eic)
+-		eic_writel(nmi_eic, NMIC, 0);
++	if (nmi_eic) {
++		if (eic_version(nmi_eic) > 2) {
++			eic_writel(nmi_eic, IDR, 1 << 0);
++			eic_writel(nmi_eic, DIS, 1 << 0);
++		} else if (eic_version(nmi_eic) > 1) {
++			eic_writel(nmi_eic, IDR, 1 << 8);
++			eic_writel(nmi_eic, DIS, 1 << 8);
++		} else {
++			eic_writel(nmi_eic, NMIC, 0);
++		}
++	}
+ 
+ 	nmi_enabled = false;
+ }
+@@ -230,6 +281,15 @@ static int __init eic_probe(struct platform_device *pdev)
+ 	eic_writel(eic, EDGE, 0UL);
+ 	eic_writel(eic, LEVEL, 0UL);
+ 
++	/*
++	 * v2+ controllers have an extra enable/disable/mask set of
++	 * registers.
++	 */
++	if (eic_version(eic) >= 2) {
++		eic_chip.enable = eic_enable_irq;
++		eic_chip.disable = eic_disable_irq;
++	}
++
+ 	eic->chip = &eic_chip;
+ 
+ 	for (i = 0; i < nr_irqs; i++) {
+diff --git a/arch/avr32/mach-at32ap/gpio-v2.c b/arch/avr32/mach-at32ap/gpio-v2.c
+new file mode 100644
+index 0000000..63b8943
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/gpio-v2.c
+@@ -0,0 +1,534 @@
++/*
++ * Atmel GPIO Port Multiplexer support
++ *
++ * Copyright (C) 2004-2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/clk.h>
++#include <linux/debugfs.h>
++#include <linux/fs.h>
++#include <linux/gpio.h>
++#include <linux/io.h>
++#include <linux/irq.h>
++#include <linux/platform_device.h>
++
++#include <mach/portmux.h>
++#include <mach/chip.h>
++
++#include "gpio-v2.h"
++
++/*
++ * One chip corresponds with one bank of I/O registers. They're really
++ * all on the same controller.
++ */
++struct atmel_gpio_chip {
++	void __iomem	*regs;
++	u32		pinmux_mask;
++	struct		gpio_chip chip;
++	char		name[8];
++	unsigned int	bank;
++	int		irq;
++};
++
++/* ...which means we only have one clock and one platform device */
++static struct clk *gpio_clk;
++static struct atmel_gpio_chip gpio_dev[NR_GPIO_BANKS];
++
++/* Pin multiplexing API */
++static DEFINE_SPINLOCK(gpio_lock);
++
++static struct atmel_gpio_chip *to_atmel_gpio_chip(struct gpio_chip *chip)
++{
++	return container_of(chip, struct atmel_gpio_chip, chip);
++}
++
++static struct atmel_gpio_chip *pin_to_chip(unsigned int gpio)
++{
++	struct atmel_gpio_chip *chip;
++	unsigned int index;
++
++	index = gpio >> 5;
++	if (index >= NR_GPIO_BANKS)
++		return NULL;
++	chip = &gpio_dev[index];
++	if (!chip->regs)
++		return NULL;
++
++	return chip;
++}
++
++/* Pin multiplexing API */
++
++void __init at32_select_periph(unsigned int port, u32 pin_mask,
++		unsigned int periph, unsigned long flags)
++{
++	struct atmel_gpio_chip *chip;
++
++	chip = pin_to_chip(port);
++	if (unlikely(!chip)) {
++		printk("GPIO: invalid port %u\n", port);
++		goto fail;
++	}
++
++	/* Test if any of the requested pins is already muxed */
++	spin_lock(&gpio_lock);
++	if (unlikely(gpiochip_is_requested(&chip->chip, port)
++			|| unlikely(pin_mask & chip->pinmux_mask))) {
++		printk(KERN_WARNING "%s: pin(s) busy (requested 0x%x, busy 0x%x)\n",
++		       chip->name, pin_mask, chip->pinmux_mask & pin_mask);
++		spin_unlock(&gpio_lock);
++		goto fail;
++	}
++
++	switch (periph) {
++	case GPIO_PERIPH_A:
++		gpio_writel(chip, PMR0C, pin_mask);
++		gpio_writel(chip, PMR1C, pin_mask);
++		break;
++	case GPIO_PERIPH_B:
++		gpio_writel(chip, PMR0S, pin_mask);
++		gpio_writel(chip, PMR1C, pin_mask);
++		break;
++	case GPIO_PERIPH_C:
++		gpio_writel(chip, PMR0C, pin_mask);
++		gpio_writel(chip, PMR1S, pin_mask);
++		break;
++	case GPIO_PERIPH_D:
++		gpio_writel(chip, PMR0S, pin_mask);
++		gpio_writel(chip, PMR1S, pin_mask);
++		break;
++	default:
++		printk("%s: unknown function for pin mask %u\n",
++				chip->name, pin_mask);
++		goto fail;
++	}
++
++	gpio_writel(chip, PUERS, pin_mask);
++
++	gpio_writel(chip, GPERC, pin_mask);
++	if (!(flags & AT32_GPIOF_PULLUP))
++		gpio_writel(chip, PUERC, pin_mask);
++
++	spin_unlock(&gpio_lock);
++
++	return;
++
++fail:
++	dump_stack();
++}
++
++void __init at32_select_gpio(unsigned int pin, unsigned long flags)
++{
++	struct atmel_gpio_chip *chip;
++	unsigned int pin_index = pin & 0x1f;
++	u32 mask = 1 << pin_index;
++
++	chip = pin_to_chip(pin);
++	if (unlikely(!chip)) {
++		printk("GPIO: invalid pin %u\n", pin);
++		goto fail;
++	}
++
++	if (unlikely(test_and_set_bit(pin_index, &chip->pinmux_mask))) {
++		printk("%s: pin %u is busy\n", chip->name, pin_index);
++		goto fail;
++	}
++
++	if (flags & AT32_GPIOF_PULLUP)
++		gpio_writel(chip, PUERS, mask);
++	else
++		gpio_writel(chip, PUERC, mask);
++	if (flags & AT32_GPIOF_MULTIDRV)
++		gpio_writel(chip, ODMERS, mask);
++	else
++		gpio_writel(chip, ODMERC, mask);
++	if (flags & AT32_GPIOF_DEGLITCH)
++		gpio_writel(chip, GFERS, mask);
++	else
++		gpio_writel(chip, GFERC, mask);
++
++	if (flags & AT32_GPIOF_OUTPUT) {
++		if (flags & AT32_GPIOF_HIGH)
++			gpio_writel(chip, OVRS, mask);
++		else
++			gpio_writel(chip, OVRC, mask);
++		gpio_writel(chip, ODERS, mask);
++	} else {
++		gpio_writel(chip, ODERC, mask);
++	}
++
++	gpio_writel(chip, GPERS, mask);
++
++	return;
++
++fail:
++	dump_stack();
++}
++
++/* Reserve a pin, preventing anyone else from changing its configuration. */
++void __init at32_reserve_pin(unsigned int port, u32 pin_mask)
++{
++	struct atmel_gpio_chip *chip;
++
++	chip = pin_to_chip(port);
++	if (unlikely(!chip)) {
++		printk("GPIO: invalid port %u\n", port);
++		goto fail;
++	}
++
++	/* Test if any of the requested pins is already muxed */
++	spin_lock(&gpio_lock);
++	if (unlikely(pin_mask & chip->pinmux_mask)) {
++		printk(KERN_WARNING "%s: pin(s) busy (req. 0x%x, busy 0x%x)\n",
++			chip->name, pin_mask, chip->pinmux_mask & pin_mask);
++		spin_unlock(&gpio_lock);
++		goto fail;
++	}
++
++	/* Reserve pins */
++	chip->pinmux_mask |= pin_mask;
++	spin_unlock(&gpio_lock);
++	return;
++
++fail:
++	dump_stack();
++}
++
++/*--------------------------------------------------------------------------*/
++
++/* GPIO API */
++
++static int get_pin_state(struct gpio_chip *chip, unsigned int offset)
++{
++	struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip);
++
++	return (gpio_readl(gpio, PVR) >> offset) & 1;
++}
++
++static void set_pin_state(struct gpio_chip *chip, unsigned int offset, int high)
++{
++	struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip);
++	u32 mask = 1 << offset;
++
++	if (high)
++		gpio_writel(gpio, OVRS, mask);
++	else
++		gpio_writel(gpio, OVRC, mask);
++}
++
++static int direction_input(struct gpio_chip *chip, unsigned int offset)
++{
++	struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip);
++	u32 mask = 1 << offset;
++
++	if (!(gpio_readl(gpio, GPER) & mask))
++		return -EINVAL;
++
++	gpio_writel(gpio, ODERC, mask);
++	return 0;
++}
++
++static int direction_output(struct gpio_chip *chip, unsigned int offset,
++		int high)
++{
++	struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip);
++	u32 mask = 1 << offset;
++
++	if (!(gpio_readl(gpio, GPER) & mask))
++		return -EINVAL;
++
++	set_pin_state(chip, offset, high);
++	gpio_writel(gpio, ODERS, mask);
++	return 0;
++}
++
++/*--------------------------------------------------------------------------*/
++
++/* GPIO IRQ support */
++
++static void gpio_irq_mask(unsigned irq)
++{
++	unsigned int		pin = irq_to_gpio(irq);
++	struct atmel_gpio_chip	*chip = &gpio_dev[pin >> 5];
++
++	gpio_writel(chip, IERC, 1 << (pin & 0x1f));
++}
++
++static void gpio_irq_unmask(unsigned irq)
++{
++	unsigned int		pin = irq_to_gpio(irq);
++	struct atmel_gpio_chip	*chip = &gpio_dev[pin >> 5];
++
++	gpio_writel(chip, IERS, 1 << (pin & 0x1f));
++}
++
++static int gpio_irq_type(unsigned irq, unsigned type)
++{
++	unsigned int		pin = irq_to_gpio(irq);
++	struct atmel_gpio_chip	*chip = &gpio_dev[pin >> 5];
++	u32			mask = 1 << (pin & 0x1f);
++
++	switch (type) {
++	case IRQ_TYPE_EDGE_FALLING:
++		gpio_writel(chip, IMR0C, mask);
++		gpio_writel(chip, IMR1S, mask);
++		break;
++	case IRQ_TYPE_EDGE_RISING:
++		gpio_writel(chip, IMR0S, mask);
++		gpio_writel(chip, IMR1C, mask);
++		break;
++	case IRQ_TYPE_NONE:
++		/* fall through */
++	case IRQ_TYPE_EDGE_BOTH:
++		gpio_writel(chip, IMR0C, mask);
++		gpio_writel(chip, IMR1C, mask);
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static struct irq_chip gpio_irqchip = {
++	.name		= "gpio",
++	.mask		= gpio_irq_mask,
++	.unmask		= gpio_irq_unmask,
++	.set_type	= gpio_irq_type,
++};
++
++static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
++{
++	struct atmel_gpio_chip	*chip = get_irq_chip_data(irq);
++	unsigned int		gpio_irq;
++
++	gpio_irq = (unsigned int) get_irq_data(irq);
++	for (;;) {
++		u32		ifr;
++		struct irq_desc	*d;
++
++		/* ack pending GPIO interrupts */
++		ifr = gpio_readl(chip, IFR);
++		if (!ifr)
++			break;
++		do {
++			int pin;
++
++			pin = ffs(ifr) - 1;
++			ifr &= ~(1 << pin);
++			gpio_writel(chip, IFRC, (1 << pin));
++
++			pin += gpio_irq;
++			d = &irq_desc[pin];
++
++			d->handle_irq(pin, d);
++		} while (ifr);
++	}
++}
++
++static void __init
++gpio_irq_setup(struct atmel_gpio_chip *chip, int irq, int gpio_irq)
++{
++	unsigned	i;
++
++	set_irq_chip_data(irq, chip);
++	set_irq_data(irq, (void *) gpio_irq);
++
++	for (i = 0; i < 32; i++, gpio_irq++) {
++		set_irq_chip_data(gpio_irq, chip);
++		set_irq_chip_and_handler(gpio_irq, &gpio_irqchip,
++				handle_simple_irq);
++	}
++
++	set_irq_chained_handler(irq, gpio_irq_handler);
++}
++
++/*--------------------------------------------------------------------------*/
++
++#ifdef CONFIG_DEBUG_FS
++
++#include <linux/seq_file.h>
++
++/*
++ * This shows more info than the generic gpio dump code:
++ * pullups, deglitching, open drain drive.
++ */
++static void gpio_bank_show(struct seq_file *s, struct gpio_chip *chip)
++{
++	struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip);
++	u32		oder, ovr, puer, pder, gfer, odmer, ier, imr0, imr1;
++	unsigned int	i;
++	u32		mask;
++
++	oder = gpio_readl(gpio, ODER);
++	ovr = gpio_readl(gpio, OVR);
++	puer = gpio_readl(gpio, PUER);
++	pder = gpio_readl(gpio, PDER);
++	gfer = gpio_readl(gpio, GFER);
++	odmer = gpio_readl(gpio, ODMER);
++	ier = gpio_readl(gpio, IER);
++	imr0 = gpio_readl(gpio, IMR0);
++	imr1 = gpio_readl(gpio, IMR1);
++
++	for (i = 0, mask = 1; i < 32; i++, mask <<= 1) {
++		const char *label;
++
++		label = gpiochip_is_requested(chip, i);
++		if (!label)
++			continue;
++
++		seq_printf(s, " gpio-%-3d ", chip->base + i);
++		gpio_decode_pin(s, gpio->bank, i);
++		seq_printf(s, " (%-12s) %s %s", label,
++				(oder & mask) ? "out" : "in",
++				(ovr & mask) ? "hi" : "lo");
++		if ((puer & mask) && !(pder & mask))
++			seq_printf(s, " pull-up");
++		else if (!(puer & mask) && (pder & mask))
++			seq_printf(s, " pull-down");
++		else if ((puer & mask) && (pder & mask))
++			seq_printf(s, " buskeeper");
++		if (gfer & mask)
++			seq_printf(s, " deglitch");
++		if (odmer & mask)
++			seq_printf(s, " open-drain");
++		if ((gpio->irq >= 0) && (ier & mask)) {
++			seq_printf(s, " irq-%d edge-",
++					gpio_to_irq(chip->base + i));
++			if (!(imr0 & mask) && !(imr1 & mask))
++				seq_printf(s, "both");
++			else if ((imr0 & mask) && !(imr1 & mask))
++				seq_printf(s, "rising");
++			else if (!(imr0 & mask) && (imr1 & mask))
++				seq_printf(s, "falling");
++			else
++				seq_printf(s, "INVALID");
++		}
++		seq_printf(s, "\n");
++	}
++}
++
++#else
++#define gpio_bank_show	NULL
++#endif
++
++static int __init gpio_probe(struct platform_device *pdev)
++{
++	struct resource *regs;
++	struct resource *irqs;
++	int irq = -1;
++	unsigned int i;
++
++	BUG_ON(pdev->id >= 1);
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs) {
++		dev_err(&pdev->dev, "no mmio resource defined\n");
++		return -ENXIO;
++	}
++	irqs = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++	if (irqs)
++		irq = irqs->start;
++
++	for (i = 0; i < NR_GPIO_BANKS; i++) {
++		unsigned int gpio_irq_base;
++		struct atmel_gpio_chip *chip;
++
++		chip = &gpio_dev[i];
++		BUG_ON(!chip->regs);
++
++		chip->chip.label = chip->name;
++		chip->chip.base = i * 32;
++		chip->chip.ngpio = 32;
++
++		chip->chip.direction_input = direction_input;
++		chip->chip.get = get_pin_state;
++		chip->chip.direction_output = direction_output;
++		chip->chip.set = set_pin_state;
++		chip->chip.dbg_show = gpio_bank_show;
++
++		gpiochip_add(&chip->chip);
++
++		gpio_irq_base = GPIO_IRQ_BASE + (i * 32);
++		if (irqs && irq <= irqs->end) {
++			gpio_irq_setup(chip, irq, gpio_irq_base);
++			chip->irq = irq;
++			irq++;
++		} else {
++			chip->irq = -1;
++		}
++
++		platform_set_drvdata(pdev, chip);
++
++		printk(KERN_DEBUG "%s: base 0x%p", chip->name, chip->regs);
++		if (chip->irq >= 0)
++			printk(" irq %d chains %d..%d", irq,
++					gpio_irq_base, gpio_irq_base + 31);
++		printk("\n");
++	}
++
++	return 0;
++}
++
++static struct platform_driver gpio_driver = {
++	.probe		= gpio_probe,
++	.driver		= {
++		.name		= "gpio",
++	},
++};
++
++static int __init gpio_init(void)
++{
++	return platform_driver_register(&gpio_driver);
++}
++postcore_initcall(gpio_init);
++
++void __init at32_gpio_init(struct platform_device *pdev)
++{
++	int i;
++	struct clk *clk;
++	struct resource *regs;
++	void __iomem *iomem_base;
++	struct atmel_gpio_chip *chip;
++
++	if (pdev->id > 0) {
++		dev_err(&pdev->dev, "only one GPIO controller supported\n");
++		return;
++	}
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs) {
++		dev_err(&pdev->dev, "no mmio resource defined\n");
++		return;
++	}
++
++	clk = clk_get(&pdev->dev, "pclk");
++	if (IS_ERR(clk)) {
++		dev_err(&pdev->dev, "no mck clock defined\n");
++		return;
++	}
++	clk_enable(clk);
++
++	gpio_clk = clk;
++
++	/*
++	 * We may get called too early for ioremap() to work. But we
++	 * know that the GPIO registers are permanently mapped 1:1
++	 */
++	iomem_base = (void __iomem __force *)regs->start;
++
++	for (i = 0; i < NR_GPIO_BANKS; i++) {
++		chip = &gpio_dev[i];
++		snprintf(chip->name, sizeof(chip->name), "gpio%d", i);
++		chip->regs = iomem_base + (i * 0x200);
++		chip->bank = i;
++
++		/* start with irqs disabled and acked */
++		gpio_writel(chip, IERC, ~0UL);
++		gpio_writel(chip, IFRC, ~0UL);
++	}
++}
+diff --git a/arch/avr32/mach-at32ap/gpio-v2.h b/arch/avr32/mach-at32ap/gpio-v2.h
+new file mode 100644
+index 0000000..77e4105
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/gpio-v2.h
+@@ -0,0 +1,116 @@
++/*
++ * Copyright (C) 2008 Atmel Corporation
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++#ifndef __GPIO_REGS_H__
++#define __GPIO_REGS_H__
++
++/* Register offsets */
++struct gpio_regs {
++	u32	GPER;
++	u32	GPERS;
++	u32	GPERC;
++	u32	GPERT;
++	u32	PMR0;
++	u32	PMR0S;
++	u32	PMR0C;
++	u32	PMR0T;
++	u32	PMR1;
++	u32	PMR1S;
++	u32	PMR1C;
++	u32	PMR1T;
++	u32	__reserved0[4];
++	u32	ODER;
++	u32	ODERS;
++	u32	ODERC;
++	u32	ODERT;
++	u32	OVR;
++	u32	OVRS;
++	u32	OVRC;
++	u32	OVRT;
++	u32	PVR;
++	u32	__reserved_PVRS;
++	u32	__reserved_PVRC;
++	u32	__reserved_PVRT;
++	u32	PUER;
++	u32	PUERS;
++	u32	PUERC;
++	u32	PUERT;
++	u32	PDER;
++	u32	PDERS;
++	u32	PDERC;
++	u32	PDERT;
++	u32	IER;
++	u32	IERS;
++	u32	IERC;
++	u32	IERT;
++	u32	IMR0;
++	u32	IMR0S;
++	u32	IMR0C;
++	u32	IMR0T;
++	u32	IMR1;
++	u32	IMR1S;
++	u32	IMR1C;
++	u32	IMR1T;
++	u32	GFER;
++	u32	GFERS;
++	u32	GFERC;
++	u32	GFERT;
++	u32	IFR;
++	u32	__reserved_IFRS;
++	u32	IFRC;
++	u32	__reserved_IFRT;
++	u32	ODMER;
++	u32	ODMERS;
++	u32	ODMERC;
++	u32	ODMERT;
++	u32	__reserved1[4];
++	u32	ODCR0;
++	u32	ODCR0S;
++	u32	ODCR0C;
++	u32	ODCR0T;
++	u32	ODCR1;
++	u32	ODCR1S;
++	u32	ODCR1C;
++	u32	ODCR1T;
++	u32	__reserved2[4];
++	u32	OSRR0;
++	u32	OSRR0S;
++	u32	OSRR0C;
++	u32	OSRR0T;
++	u32	__reserved3[8];
++	u32	STER;
++	u32	STERS;
++	u32	STERC;
++	u32	STERT;
++	u32	__reserved4[35];
++	u32	VERSION;
++};
++
++/* Register access macros */
++#define __gpio_regs(bank) ((struct gpio_regs __iomem *)(bank)->regs)
++#define gpio_readl(bank, reg)						\
++	__raw_readl(&__gpio_regs(bank)->reg)
++#define gpio_writel(bank, reg, value)					\
++	__raw_writel(value, &__gpio_regs(bank)->reg)
++
++void at32_gpio_init(struct platform_device *pdev);
++
++#endif /* __GPIO_REGS_H__ */
+diff --git a/arch/avr32/mach-at32ap/hmatrix.c b/arch/avr32/mach-at32ap/hmatrix.c
+index 48f5ede..2f55e69 100644
+--- a/arch/avr32/mach-at32ap/hmatrix.c
++++ b/arch/avr32/mach-at32ap/hmatrix.c
+@@ -54,6 +54,81 @@ u32 hmatrix_read_reg(unsigned long offset)
+ }
+ 
+ /**
++ * hmatrix_set_default_master - set default master on a given slave
++ * @slave: HSB slave interface ID
++ * @master: HSB master interface ID
++ */
++void hmatrix_set_default_master(unsigned int slave, unsigned int master)
++{
++	u32 value;
++	unsigned int reg;
++
++	WARN_ON(slave > HMATRIX_MAX_SLAVE
++			|| master > HMATRIX_MASTER_LAST);
++
++	reg = HMATRIX_SCFG(slave);
++
++	clk_enable(&at32_hmatrix_clk);
++	value = __hmatrix_read_reg(reg);
++	value &= ~(HMATRIX_SCFG_FIXED_DEFMSTR(HMATRIX_MAX_SLAVE)
++			| HMATRIX_SCFG_DEFMSTR_MASK);
++
++	switch (master) {
++	case HMATRIX_MASTER_NONE:
++		value |= HMATRIX_SCFG_DEFMSTR_NONE;
++		break;
++	case HMATRIX_MASTER_LAST:
++		value |= HMATRIX_SCFG_DEFMSTR_LAST;
++		break;
++	default:
++		value |= HMATRIX_SCFG_DEFMSTR_FIXED;
++		value |= HMATRIX_SCFG_FIXED_DEFMSTR(master);
++		break;
++	}
++
++	__hmatrix_write_reg(reg, value);
++	__hmatrix_read_reg(reg);
++	clk_disable(&at32_hmatrix_clk);
++}
++
++/**
++ * hmatrix_set_priority - set the priority of a master on a given slave
++ * @slave: HSB slave interface ID
++ * @master: HSB master interface ID
++ * @priority: Priority of @master when competing for access to @slave.
++ *
++ * Note that this is currently broken -- we need some way to enable
++ * fixed-priority arbitration, and that happens to be broken on AP7000
++ * rev C.
++ */
++void hmatrix_set_priority(unsigned int slave, unsigned int master,
++		unsigned int priority)
++{
++	u32 value;
++	unsigned int reg;
++
++	WARN_ON(slave > HMATRIX_MAX_SLAVE
++			|| master > HMATRIX_MAX_MASTER
++			|| priority > HMATRIX_MAX_PRIO);
++
++	clk_enable(&at32_hmatrix_clk);
++	if (master < 8) {
++		reg = HMATRIX_PRAS(slave);
++		value = __hmatrix_read_reg(reg);
++		value &= ~HMATRIX_PRAS_PRIO(master, HMATRIX_MAX_PRIO);
++		value |= HMATRIX_PRAS_PRIO(master, priority);
++	} else {
++		reg = HMATRIX_PRBS(slave);
++		value = __hmatrix_read_reg(reg);
++		value &= ~HMATRIX_PRBS_PRIO(master, HMATRIX_MAX_PRIO);
++		value |= HMATRIX_PRBS_PRIO(master, priority);
++	}
++	__hmatrix_write_reg(reg, value);
++	__hmatrix_read_reg(reg);
++	clk_disable(&at32_hmatrix_clk);
++}
++
++/**
+  * hmatrix_sfr_set_bits - set bits in a slave's Special Function Register
+  * @slave_id: operate on the SFR belonging to this slave
+  * @mask: mask of bits to be set in the SFR
+diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
+index 2875c11..3152e0f 100644
+--- a/arch/avr32/mach-at32ap/hsmc.c
++++ b/arch/avr32/mach-at32ap/hsmc.c
+@@ -229,10 +229,8 @@ static int hsmc_probe(struct platform_device *pdev)
+ 	if (IS_ERR(pclk))
+ 		return PTR_ERR(pclk);
+ 	mck = clk_get(&pdev->dev, "mck");
+-	if (IS_ERR(mck)) {
+-		ret = PTR_ERR(mck);
+-		goto out_put_pclk;
+-	}
++	if (IS_ERR(mck))
++		mck = pclk;
+ 
+ 	ret = -ENOMEM;
+ 	hsmc = kzalloc(sizeof(struct hsmc), GFP_KERNEL);
+@@ -260,8 +258,8 @@ out_disable_clocks:
+ 	clk_disable(pclk);
+ 	kfree(hsmc);
+ out_put_clocks:
+-	clk_put(mck);
+-out_put_pclk:
++	if (mck != pclk)
++		clk_put(mck);
+ 	clk_put(pclk);
+ 	hsmc = NULL;
+ 	return ret;
+diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
+index 1e9852d..5c4c971 100644
+--- a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
++++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
+@@ -83,4 +83,135 @@
+ #define HMATRIX_BASE	0xfff00800
+ #define SDRAMC_BASE	0xfff03800
+ 
++/* LCDC on port C */
++#define ATMEL_LCDC_PC_CC	(1ULL << 19)
++#define ATMEL_LCDC_PC_HSYNC	(1ULL << 20)
++#define ATMEL_LCDC_PC_PCLK	(1ULL << 21)
++#define ATMEL_LCDC_PC_VSYNC	(1ULL << 22)
++#define ATMEL_LCDC_PC_DVAL	(1ULL << 23)
++#define ATMEL_LCDC_PC_MODE	(1ULL << 24)
++#define ATMEL_LCDC_PC_PWR	(1ULL << 25)
++#define ATMEL_LCDC_PC_DATA0	(1ULL << 26)
++#define ATMEL_LCDC_PC_DATA1	(1ULL << 27)
++#define ATMEL_LCDC_PC_DATA2	(1ULL << 28)
++#define ATMEL_LCDC_PC_DATA3	(1ULL << 29)
++#define ATMEL_LCDC_PC_DATA4	(1ULL << 30)
++#define ATMEL_LCDC_PC_DATA5	(1ULL << 31)
++
++/* LCDC on port D */
++#define ATMEL_LCDC_PD_DATA6	(1ULL << 0)
++#define ATMEL_LCDC_PD_DATA7	(1ULL << 1)
++#define ATMEL_LCDC_PD_DATA8	(1ULL << 2)
++#define ATMEL_LCDC_PD_DATA9	(1ULL << 3)
++#define ATMEL_LCDC_PD_DATA10	(1ULL << 4)
++#define ATMEL_LCDC_PD_DATA11	(1ULL << 5)
++#define ATMEL_LCDC_PD_DATA12	(1ULL << 6)
++#define ATMEL_LCDC_PD_DATA13	(1ULL << 7)
++#define ATMEL_LCDC_PD_DATA14	(1ULL << 8)
++#define ATMEL_LCDC_PD_DATA15	(1ULL << 9)
++#define ATMEL_LCDC_PD_DATA16	(1ULL << 10)
++#define ATMEL_LCDC_PD_DATA17	(1ULL << 11)
++#define ATMEL_LCDC_PD_DATA18	(1ULL << 12)
++#define ATMEL_LCDC_PD_DATA19	(1ULL << 13)
++#define ATMEL_LCDC_PD_DATA20	(1ULL << 14)
++#define ATMEL_LCDC_PD_DATA21	(1ULL << 15)
++#define ATMEL_LCDC_PD_DATA22	(1ULL << 16)
++#define ATMEL_LCDC_PD_DATA23	(1ULL << 17)
++
++/* LCDC on port E */
++#define ATMEL_LCDC_PE_CC	(1ULL << (32 + 0))
++#define ATMEL_LCDC_PE_DVAL	(1ULL << (32 + 1))
++#define ATMEL_LCDC_PE_MODE	(1ULL << (32 + 2))
++#define ATMEL_LCDC_PE_DATA0	(1ULL << (32 + 3))
++#define ATMEL_LCDC_PE_DATA1	(1ULL << (32 + 4))
++#define ATMEL_LCDC_PE_DATA2	(1ULL << (32 + 5))
++#define ATMEL_LCDC_PE_DATA3	(1ULL << (32 + 6))
++#define ATMEL_LCDC_PE_DATA4	(1ULL << (32 + 7))
++#define ATMEL_LCDC_PE_DATA8	(1ULL << (32 + 8))
++#define ATMEL_LCDC_PE_DATA9	(1ULL << (32 + 9))
++#define ATMEL_LCDC_PE_DATA10	(1ULL << (32 + 10))
++#define ATMEL_LCDC_PE_DATA11	(1ULL << (32 + 11))
++#define ATMEL_LCDC_PE_DATA12	(1ULL << (32 + 12))
++#define ATMEL_LCDC_PE_DATA16	(1ULL << (32 + 13))
++#define ATMEL_LCDC_PE_DATA17	(1ULL << (32 + 14))
++#define ATMEL_LCDC_PE_DATA18	(1ULL << (32 + 15))
++#define ATMEL_LCDC_PE_DATA19	(1ULL << (32 + 16))
++#define ATMEL_LCDC_PE_DATA20	(1ULL << (32 + 17))
++#define ATMEL_LCDC_PE_DATA21	(1ULL << (32 + 18))
++
++
++#define ATMEL_LCDC(PORT, PIN)	(ATMEL_LCDC_##PORT##_##PIN)
++
++
++#define ATMEL_LCDC_PRI_24B_DATA	(					\
++		ATMEL_LCDC(PC, DATA0)  | ATMEL_LCDC(PC, DATA1)  |	\
++		ATMEL_LCDC(PC, DATA2)  | ATMEL_LCDC(PC, DATA3)  |	\
++		ATMEL_LCDC(PC, DATA4)  | ATMEL_LCDC(PC, DATA5)  |	\
++		ATMEL_LCDC(PD, DATA6)  | ATMEL_LCDC(PD, DATA7)  |	\
++		ATMEL_LCDC(PD, DATA8)  | ATMEL_LCDC(PD, DATA9)  |	\
++		ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) |	\
++		ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA13) |	\
++		ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) |	\
++		ATMEL_LCDC(PD, DATA16) | ATMEL_LCDC(PD, DATA17) |	\
++		ATMEL_LCDC(PD, DATA18) | ATMEL_LCDC(PD, DATA19) |	\
++		ATMEL_LCDC(PD, DATA20) | ATMEL_LCDC(PD, DATA21) |	\
++		ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23))
++
++#define ATMEL_LCDC_ALT_24B_DATA (					\
++		ATMEL_LCDC(PE, DATA0)  | ATMEL_LCDC(PE, DATA1)  |	\
++		ATMEL_LCDC(PE, DATA2)  | ATMEL_LCDC(PE, DATA3)  |	\
++		ATMEL_LCDC(PE, DATA4)  | ATMEL_LCDC(PC, DATA5)  |	\
++		ATMEL_LCDC(PD, DATA6)  | ATMEL_LCDC(PD, DATA7)  |	\
++		ATMEL_LCDC(PE, DATA8)  | ATMEL_LCDC(PE, DATA9)  |	\
++		ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) |	\
++		ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PD, DATA13) |	\
++		ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) |	\
++		ATMEL_LCDC(PE, DATA16) | ATMEL_LCDC(PE, DATA17) |	\
++		ATMEL_LCDC(PE, DATA18) | ATMEL_LCDC(PE, DATA19) |	\
++		ATMEL_LCDC(PE, DATA20) | ATMEL_LCDC(PE, DATA21) |	\
++		ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23))
++
++#define ATMEL_LCDC_PRI_15B_DATA (					\
++		ATMEL_LCDC(PC, DATA0)  | ATMEL_LCDC(PC, DATA1)  |	\
++		ATMEL_LCDC(PC, DATA2)  | ATMEL_LCDC(PC, DATA3)  |	\
++		ATMEL_LCDC(PC, DATA4)  | ATMEL_LCDC(PC, DATA5)  |	\
++		ATMEL_LCDC(PD, DATA8)  | ATMEL_LCDC(PD, DATA9)  |	\
++		ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) |	\
++		ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA16) |	\
++		ATMEL_LCDC(PD, DATA17) | ATMEL_LCDC(PD, DATA18) |	\
++		ATMEL_LCDC(PD, DATA19) | ATMEL_LCDC(PD, DATA20))
++
++#define ATMEL_LCDC_ALT_15B_DATA	(					\
++		ATMEL_LCDC(PE, DATA0)  | ATMEL_LCDC(PE, DATA1)  |	\
++		ATMEL_LCDC(PE, DATA2)  | ATMEL_LCDC(PE, DATA3)  |	\
++		ATMEL_LCDC(PE, DATA4)  | ATMEL_LCDC(PC, DATA5)  |	\
++		ATMEL_LCDC(PE, DATA8)  | ATMEL_LCDC(PE, DATA9)  |	\
++		ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) |	\
++		ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PE, DATA16) |	\
++		ATMEL_LCDC(PE, DATA17) | ATMEL_LCDC(PE, DATA18) |	\
++		ATMEL_LCDC(PE, DATA19) | ATMEL_LCDC(PE, DATA20))
++
++#define ATMEL_LCDC_PRI_CONTROL (					\
++		ATMEL_LCDC(PC, CC)   | ATMEL_LCDC(PC, DVAL) |		\
++		ATMEL_LCDC(PC, MODE) | ATMEL_LCDC(PC, PWR))
++
++#define ATMEL_LCDC_ALT_CONTROL (					\
++		ATMEL_LCDC(PE, CC)   | ATMEL_LCDC(PE, DVAL) |		\
++		ATMEL_LCDC(PE, MODE) | ATMEL_LCDC(PC, PWR))
++
++#define ATMEL_LCDC_CONTROL (						\
++		ATMEL_LCDC(PC, HSYNC) | ATMEL_LCDC(PC, VSYNC) |		\
++		ATMEL_LCDC(PC, PCLK))
++
++#define ATMEL_LCDC_PRI_24BIT	(ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_24B_DATA)
++
++#define ATMEL_LCDC_ALT_24BIT	(ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_24B_DATA)
++
++#define ATMEL_LCDC_PRI_15BIT	(ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_15B_DATA)
++
++#define ATMEL_LCDC_ALT_15BIT	(ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_15B_DATA)
++
++/* Bitmask for all EBI data (D16..D31) pins on port E */
++#define ATMEL_EBI_PE_DATA_ALL  (0x0000FFFF)
++
+ #endif /* __ASM_ARCH_AT32AP700X_H__ */
+diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap720x.h b/arch/avr32/mach-at32ap/include/mach/at32ap720x.h
+new file mode 100644
+index 0000000..5a3082a
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/include/mach/at32ap720x.h
+@@ -0,0 +1,105 @@
++/*
++ * Pin definitions for AT32AP7200
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_ARCH_AT32AP7200_H__
++#define __ASM_ARCH_AT32AP7200_H__
++
++#define GPIO_PERIPH_A	0x00
++#define GPIO_PERIPH_B	0x01
++#define GPIO_PERIPH_C	0x02
++#define GPIO_PERIPH_D	0x03
++
++#define NR_GPIO_BANKS	8
++
++/*
++ * Pin numbers identifying specific GPIO pins on the chip. They can
++ * also be converted to IRQ numbers by passing them through
++ * gpio_to_irq().
++ */
++#define GPIO_BASE	(0)
++
++#define GPIO_PA_BASE	(GPIO_BASE + 0 * 32)
++#define GPIO_PB_BASE	(GPIO_BASE + 1 * 32)
++#define GPIO_PC_BASE	(GPIO_BASE + 2 * 32)
++#define GPIO_PD_BASE	(GPIO_BASE + 3 * 32)
++#define GPIO_PE_BASE	(GPIO_BASE + 4 * 32)
++#define GPIO_PF_BASE	(GPIO_BASE + 5 * 32)
++#define GPIO_PX_BASE	(GPIO_BASE + 6 * 32)
++
++#define GPIO_PIN_PA(N)	(GPIO_PA_BASE + (N))
++#define GPIO_PIN_PB(N)	(GPIO_PB_BASE + (N))
++#define GPIO_PIN_PC(N)	(GPIO_PC_BASE + (N))
++#define GPIO_PIN_PD(N)	(GPIO_PD_BASE + (N))
++#define GPIO_PIN_PE(N)	(GPIO_PE_BASE + (N))
++#define GPIO_PIN_PF(N)	(GPIO_PF_BASE + (N))
++#define GPIO_PIN_PX(N)	(GPIO_PX_BASE + (N))
++
++#define gpio_decode_pin(s, bank, offset)				\
++	do {								\
++		switch (bank) {						\
++		case 7:							\
++			offset += 32;					\
++			/* fall through */				\
++		case 6:							\
++			seq_printf(s, "PX%-2u", offset);		\
++			break;						\
++		default:						\
++			seq_printf(s, "P%c%-2u", bank + 'A', offset);	\
++			break;						\
++		}							\
++	} while (0)
++
++/* HSB master IDs */
++#define HMATRIX_MASTER_CPU_ICACHE		 0
++#define HMATRIX_MASTER_CPU_DCACHE		 1
++#define HMATRIX_MASTER_PDCA			 2
++#define HMATRIX_MASTER_LCDC			 4
++#define HMATRIX_MASTER_MPOP_IBI			 5
++#define HMATRIX_MASTER_MPOP_OBI			 6
++#define HMATRIX_MASTER_MPOP_OM			 7
++#define HMATRIX_MASTER_DMACA_M0			 8
++#define HMATRIX_MASTER_DMACA_M1			 9
++#define HMATRIX_MASTER_USBB			10
++#define HMATRIX_MASTER_USBH_EHCI		11
++#define HMATRIX_MASTER_USBH_OHCI		12
++#define HMATRIX_MASTER_MACB			13
++
++/* HSB slave IDs */
++#define HMATRIX_SLAVE_BOOTROM			 0
++#define HMATRIX_SLAVE_PBA			 1
++#define HMATRIX_SLAVE_PBB			 2
++#define HMATRIX_SLAVE_PBC			 3
++#define HMATRIX_SLAVE_SRAM0			 4
++#define HMATRIX_SLAVE_SRAM1			 5
++#define HMATRIX_SLAVE_EBI			 6
++#define HMATRIX_SLAVE_LCDC			 7
++#define HMATRIX_SLAVE_MPOP			 8
++#define HMATRIX_SLAVE_DMACA			 9
++#define HMATRIX_SLAVE_USBB			10
++#define HMATRIX_SLAVE_EHCI			11
++#define HMATRIX_SLAVE_OHCI			12
++
++/* Bits in HMATRIX SFR6 (EBI) */
++#define HMATRIX_EBI_SDRAM_ENABLE		(1 << 1)
++#define HMATRIX_EBI_NAND_ENABLE			(1 << 3)
++#define HMATRIX_EBI_CF0_ENABLE			(1 << 4)
++#define HMATRIX_EBI_CF1_ENABLE			(1 << 5)
++
++/*
++ * Base addresses of controllers that may be accessed early by
++ * platform code.
++ */
++#define GPIO_HW_BASE	0xffd02000
++#define INTC_BASE	0xffd00000
++#define PM_BASE		0xffd00400
++#define SDC_BASE	0xffd00800
++#define SDRAMC_BASE	0xffe04800
++#define HMATRIX_BASE	0xffe05000
++
++#endif /* __ASM_ARCH_AT32AP7200_H__ */
+diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
+index e60e907..85441ff 100644
+--- a/arch/avr32/mach-at32ap/include/mach/board.h
++++ b/arch/avr32/mach-at32ap/include/mach/board.h
+@@ -14,8 +14,14 @@
+  */
+ extern unsigned long at32_board_osc_rates[];
+   
+-/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
+-void at32_add_system_devices(void);
++/*
++ * This used to add essential system devices, but this is now done
++ * automatically. Please don't use it in new board code.
++ */
++static inline void __deprecated at32_add_system_devices(void)
++{
++
++}
+ 
+ #define ATMEL_MAX_UART	4
+ extern struct platform_device *atmel_default_console_device;
+@@ -43,12 +49,20 @@ struct atmel_lcdfb_info;
+ struct platform_device *
+ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+ 		     unsigned long fbmem_start, unsigned long fbmem_len,
+-		     unsigned int pin_config);
++		     u64 pin_mask);
++
++
++struct platform_device *
++at32_add_device_mpop(unsigned int id, struct platform_device *lcdc_pdev,
++		     unsigned long fbmem_start, unsigned long fbmem_len);
+ 
+ struct usba_platform_data;
+ struct platform_device *
+ at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
+ 
++struct platform_device *at32_add_device_ohci(unsigned int id);
++struct platform_device *at32_add_device_ehci(unsigned int id);
++
+ struct ide_platform_data {
+ 	u8      cs;
+ };
+diff --git a/arch/avr32/mach-at32ap/include/mach/chip.h b/arch/avr32/mach-at32ap/include/mach/chip.h
+index 5efca6d..09c0fe7 100644
+--- a/arch/avr32/mach-at32ap/include/mach/chip.h
++++ b/arch/avr32/mach-at32ap/include/mach/chip.h
+@@ -12,6 +12,8 @@
+ 
+ #if defined(CONFIG_CPU_AT32AP700X)
+ # include <mach/at32ap700x.h>
++#elif defined(CONFIG_CPU_AT32AP720X)
++# include <mach/at32ap720x.h>
+ #else
+ # error Unknown chip type selected
+ #endif
+diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h
+index 44d0bfa..f4a5f26 100644
+--- a/arch/avr32/mach-at32ap/include/mach/cpu.h
++++ b/arch/avr32/mach-at32ap/include/mach/cpu.h
+@@ -20,6 +20,19 @@
+ # define cpu_is_at32ap7000()	(0)
+ #endif
+ 
++#ifdef CONFIG_CPU_AT32AP720X
++# define cpu_is_at32ap7200()	(1)
++#else
++# define cpu_is_at32ap7200()	(0)
++#endif
++
++/*
++ * Unfortunately, only AP700x has a non-broken COUNT/COMPARE
++ * implementation. Other chips need to use different timers. The good
++ * news is that these timers are usually better anyway.
++ */
++#define cpu_has_working_compare()	(cpu_is_at32ap7000())
++
+ /*
+  * Since this is AVR32, we will never run on any AT91 CPU. But these
+  * definitions may reduce clutter in common drivers.
+diff --git a/arch/avr32/mach-at32ap/include/mach/hmatrix.h b/arch/avr32/mach-at32ap/include/mach/hmatrix.h
+index 7a368f2..8417737 100644
+--- a/arch/avr32/mach-at32ap/include/mach/hmatrix.h
++++ b/arch/avr32/mach-at32ap/include/mach/hmatrix.h
+@@ -15,6 +15,9 @@ extern struct clk at32_hmatrix_clk;
+ void hmatrix_write_reg(unsigned long offset, u32 value);
+ u32 hmatrix_read_reg(unsigned long offset);
+ 
++void hmatrix_set_default_master(unsigned int slave, unsigned int master);
++void hmatrix_set_priority(unsigned int slave, unsigned int master,
++		unsigned int priority);
+ void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask);
+ void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask);
+ 
+@@ -33,6 +36,7 @@ void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask);
+ # define HMATRIX_SCFG_DEFMSTR_NONE	(  0 << 16)	/* No default master */
+ # define HMATRIX_SCFG_DEFMSTR_LAST	(  1 << 16)	/* Last def master */
+ # define HMATRIX_SCFG_DEFMSTR_FIXED	(  2 << 16)	/* Fixed def master */
++# define HMATRIX_SCFG_DEFMSTR_MASK	(  3 << 16)
+ # define HMATRIX_SCFG_FIXED_DEFMSTR(m)	((m) << 18)	/* Fixed master ID */
+ # define HMATRIX_SCFG_ARBT_ROUND_ROBIN	(  0 << 24)	/* RR arbitration */
+ # define HMATRIX_SCFG_ARBT_FIXED_PRIO	(  1 << 24)	/* Fixed priority */
+@@ -52,4 +56,12 @@ void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask);
+ /* Special Function Register. Bit definitions are chip-specific */
+ #define HMATRIX_SFR(s)			(0x0110 + 4 * (s))
+ 
++#define HMATRIX_MAX_SLAVE	15
++#define HMATRIX_MAX_MASTER	15
++#define HMATRIX_MAX_PRIO	15
++
++/* Special master IDs for use with hmatrix_set_default_master() */
++#define HMATRIX_MASTER_NONE	16	/* No default master */
++#define HMATRIX_MASTER_LAST	17	/* Last master stays connected */
++
+ #endif /* __HMATRIX_H */
+diff --git a/arch/avr32/mach-at32ap/include/mach/init.h b/arch/avr32/mach-at32ap/include/mach/init.h
+index bc40e3d..66a6866 100644
+--- a/arch/avr32/mach-at32ap/include/mach/init.h
++++ b/arch/avr32/mach-at32ap/include/mach/init.h
+@@ -15,4 +15,10 @@ void setup_board(void);
+ 
+ void at32_setup_serial_console(unsigned int usart_id);
+ 
++/*
++ * Called from time_init() when a broken COUNT/COMPARE implementation
++ * is detected.
++ */
++void platform_time_init(void);
++
+ #endif /* __ASM_AVR32_AT32AP_INIT_H__ */
+diff --git a/arch/avr32/mach-at32ap/include/mach/io.h b/arch/avr32/mach-at32ap/include/mach/io.h
+index 4ec6abc..22ea79b 100644
+--- a/arch/avr32/mach-at32ap/include/mach/io.h
++++ b/arch/avr32/mach-at32ap/include/mach/io.h
+@@ -1,8 +1,7 @@
+ #ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
+ #define __ASM_AVR32_ARCH_AT32AP_IO_H
+ 
+-/* For "bizarre" halfword swapping */
+-#include <linux/byteorder/swabb.h>
++#include <linux/swab.h>
+ 
+ #if defined(CONFIG_AP700X_32_BIT_SMC)
+ # define __swizzle_addr_b(addr)	(addr ^ 3UL)
+diff --git a/arch/avr32/mach-at32ap/include/mach/irq.h b/arch/avr32/mach-at32ap/include/mach/irq.h
+index 608e350..21f37f3 100644
+--- a/arch/avr32/mach-at32ap/include/mach/irq.h
++++ b/arch/avr32/mach-at32ap/include/mach/irq.h
+@@ -6,7 +6,7 @@
+ #define AT32_EXTINT(n)	(EIM_IRQ_BASE + (n))
+ 
+ #define GPIO_IRQ_BASE	(EIM_IRQ_BASE + NR_EIM_IRQS)
+-#define NR_GPIO_CTLR	(5 /*internal*/ + 1 /*external*/)
++#define NR_GPIO_CTLR	(8 /*internal*/ + 1 /*external*/)
+ #define NR_GPIO_IRQS	(NR_GPIO_CTLR * 32)
+ 
+ #define NR_IRQS		(GPIO_IRQ_BASE + NR_GPIO_IRQS)
+diff --git a/arch/avr32/mach-at32ap/include/mach/pm.h b/arch/avr32/mach-at32ap/include/mach/pm.h
+index 979b355..3f65ab1 100644
+--- a/arch/avr32/mach-at32ap/include/mach/pm.h
++++ b/arch/avr32/mach-at32ap/include/mach/pm.h
+@@ -11,13 +11,17 @@
+ #define __ASM_AVR32_ARCH_PM_H
+ 
+ /* Possible arguments to the "sleep" instruction */
+-#define CPU_SLEEP_IDLE		0
+-#define CPU_SLEEP_FROZEN	1
+-#define CPU_SLEEP_STANDBY	2
+-#define CPU_SLEEP_STOP		3
+-#define CPU_SLEEP_STATIC	5
++#define CPU_SLEEP_IDLE		0x00
++#define CPU_SLEEP_FROZEN	0x01
++#define CPU_SLEEP_STANDBY	0x02
++#define CPU_SLEEP_STOP		0x03
++#define CPU_SLEEP_DEEPSTOP	0x04	/* Not valid on AP700x */
++#define CPU_SLEEP_STATIC	0x05
++#define CPU_SLEEP_SHUTDOWN	0x06	/* Not valid on AP700x */
++#define CPU_SLEEP_UNMASK_IRQ	0x80	/* Not valid on AP700x */
+ 
+ #ifndef __ASSEMBLY__
++#if defined(CONFIG_CPU_AT32AP700X)
+ extern void cpu_enter_idle(void);
+ extern void cpu_enter_standby(unsigned long sdramc_base);
+ 
+@@ -37,15 +41,57 @@ static inline void cpu_idle_sleep(void)
+ {
+ 	/*
+ 	 * If we're using the COUNT and COMPARE registers for
+-	 * timekeeping, we can't use the IDLE state.
++	 * timekeeping on AP7000, we can't use the IDLE state.
+ 	 */
+ 	if (disable_idle_sleep)
+ 		cpu_relax();
+ 	else
+ 		cpu_enter_idle();
+ }
++#else
++static inline void cpu_disable_idle_sleep(void)
++{
++
++}
++
++static inline void cpu_enable_idle_sleep(void)
++{
++
++}
++
++static inline void cpu_enter_idle(void)
++{
++	/* Enable interrupts and sleep */
++	asm volatile("sleep %0"
++			:
++			: "i"(CPU_SLEEP_IDLE | CPU_SLEEP_UNMASK_IRQ)
++			: "memory");
++}
++
++static inline void cpu_idle_sleep(void)
++{
++	local_irq_disable();
++	if (!test_thread_flag(TIF_NEED_RESCHED))
++		cpu_enter_idle();
++	local_irq_enable();
++}
++#endif
+ 
+ void intc_set_suspend_handler(unsigned long offset);
++
++extern unsigned long at32_get_reset_cause(void);
++
+ #endif
+ 
++#define AT32_RCAUSE_POR		(1 <<  0)	/* Power-On Reset */
++#define AT32_RCAUSE_BOD		(1 <<  1)	/* Brown-Out Detected */
++#define AT32_RCAUSE_EXT		(1 <<  2)	/* External Reset */
++#define AT32_RCAUSE_WDT		(1 <<  3)	/* Watchdog Timeout */
++#define AT32_RCAUSE_JTAG	(1 <<  4)	/* JTAG Reset */
++#define AT32_RCAUSE_NTAE	(1 <<  5)	/* NanoTrace Access Error */
++#define AT32_RCAUSE_SLEEP	(1 <<  6)	/* Shutdown or Static mode */
++#define AT32_RCAUSE_CPUERR	(1 <<  7)	/* CPU Error */
++#define AT32_RCAUSE_OCDRST	(1 <<  8)	/* OCD Reset */
++#define AT32_RCAUSE_JTAGHARD	(1 <<  9)	/* JTAG Hard Reset */
++
+ #endif /* __ASM_AVR32_ARCH_PM_H */
+diff --git a/arch/avr32/mach-at32ap/include/mach/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h
+index b1abe6b..4873024 100644
+--- a/arch/avr32/mach-at32ap/include/mach/portmux.h
++++ b/arch/avr32/mach-at32ap/include/mach/portmux.h
+@@ -21,9 +21,10 @@
+ #define AT32_GPIOF_DEGLITCH	0x00000008	/* (IN) Filter glitches */
+ #define AT32_GPIOF_MULTIDRV	0x00000010	/* Enable multidriver option */
+ 
+-void at32_select_periph(unsigned int pin, unsigned int periph,
+-			unsigned long flags);
++void at32_select_periph(unsigned int port, unsigned int pin,
++			unsigned int periph, unsigned long flags);
+ void at32_select_gpio(unsigned int pin, unsigned long flags);
+-void at32_reserve_pin(unsigned int pin);
++void at32_deselect_pin(unsigned int pin);
++void at32_reserve_pin(unsigned int port, u32 pin_mask);
+ 
+ #endif /* __ASM_ARCH_PORTMUX_H__ */
+diff --git a/arch/avr32/mach-at32ap/pdc.c b/arch/avr32/mach-at32ap/pdc.c
+index 1040bda..61ab15a 100644
+--- a/arch/avr32/mach-at32ap/pdc.c
++++ b/arch/avr32/mach-at32ap/pdc.c
+@@ -35,7 +35,6 @@ static int __init pdc_probe(struct platform_device *pdev)
+ }
+ 
+ static struct platform_driver pdc_driver = {
+-	.probe		= pdc_probe,
+ 	.driver		= {
+ 		.name	= "pdc",
+ 	},
+@@ -43,6 +42,6 @@ static struct platform_driver pdc_driver = {
+ 
+ static int __init pdc_init(void)
+ {
+-	return platform_driver_register(&pdc_driver);
++	return platform_driver_probe(&pdc_driver, pdc_probe);
+ }
+ arch_initcall(pdc_init);
+diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
+index 405ee6b..09a274c 100644
+--- a/arch/avr32/mach-at32ap/pio.c
++++ b/arch/avr32/mach-at32ap/pio.c
+@@ -50,35 +50,48 @@ static struct pio_device *gpio_to_pio(unsigned int gpio)
+ }
+ 
+ /* Pin multiplexing API */
++static DEFINE_SPINLOCK(pio_lock);
+ 
+-void __init at32_select_periph(unsigned int pin, unsigned int periph,
+-			       unsigned long flags)
++void __init at32_select_periph(unsigned int port, u32 pin_mask,
++			       unsigned int periph, unsigned long flags)
+ {
+ 	struct pio_device *pio;
+-	unsigned int pin_index = pin & 0x1f;
+-	u32 mask = 1 << pin_index;
+ 
+-	pio = gpio_to_pio(pin);
++	/* assign and verify pio */
++	pio = gpio_to_pio(port);
+ 	if (unlikely(!pio)) {
+-		printk("pio: invalid pin %u\n", pin);
++		printk(KERN_WARNING "pio: invalid port %u\n", port);
+ 		goto fail;
+ 	}
+ 
+-	if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask)
+-			 || gpiochip_is_requested(&pio->chip, pin_index))) {
+-		printk("%s: pin %u is busy\n", pio->name, pin_index);
++	/* Test if any of the requested pins is already muxed */
++	spin_lock(&pio_lock);
++	if (unlikely(pio->pinmux_mask & pin_mask)) {
++		printk(KERN_WARNING "%s: pin(s) busy (requested 0x%x, busy 0x%x)\n",
++		       pio->name, pin_mask, pio->pinmux_mask & pin_mask);
++		spin_unlock(&pio_lock);
+ 		goto fail;
+ 	}
+ 
+-	pio_writel(pio, PUER, mask);
++	pio->pinmux_mask |= pin_mask;
++
++	/* enable pull ups */
++	pio_writel(pio, PUER, pin_mask);
++
++	/* select either peripheral A or B */
+ 	if (periph)
+-		pio_writel(pio, BSR, mask);
++		pio_writel(pio, BSR, pin_mask);
+ 	else
+-		pio_writel(pio, ASR, mask);
++		pio_writel(pio, ASR, pin_mask);
+ 
+-	pio_writel(pio, PDR, mask);
++	/* enable peripheral control */
++	pio_writel(pio, PDR, pin_mask);
++
++	/* Disable pull ups if not requested. */
+ 	if (!(flags & AT32_GPIOF_PULLUP))
+-		pio_writel(pio, PUDR, mask);
++		pio_writel(pio, PUDR, pin_mask);
++
++	spin_unlock(&pio_lock);
+ 
+ 	return;
+ 
+@@ -134,8 +147,11 @@ fail:
+ 	dump_stack();
+ }
+ 
+-/* Reserve a pin, preventing anyone else from changing its configuration. */
+-void __init at32_reserve_pin(unsigned int pin)
++/*
++ * Undo a previous pin reservation. Will not affect the hardware
++ * configuration.
++ */
++void at32_deselect_pin(unsigned int pin)
+ {
+ 	struct pio_device *pio;
+ 	unsigned int pin_index = pin & 0x1f;
+@@ -143,14 +159,37 @@ void __init at32_reserve_pin(unsigned int pin)
+ 	pio = gpio_to_pio(pin);
+ 	if (unlikely(!pio)) {
+ 		printk("pio: invalid pin %u\n", pin);
++		dump_stack();
++		return;
++	}
++
++	clear_bit(pin_index, &pio->pinmux_mask);
++}
++
++/* Reserve a pin, preventing anyone else from changing its configuration. */
++void __init at32_reserve_pin(unsigned int port, u32 pin_mask)
++{
++	struct pio_device *pio;
++
++	/* assign and verify pio */
++	pio = gpio_to_pio(port);
++	if (unlikely(!pio)) {
++		printk(KERN_WARNING "pio: invalid port %u\n", port);
+ 		goto fail;
+ 	}
+ 
+-	if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) {
+-		printk("%s: pin %u is busy\n", pio->name, pin_index);
++	/* Test if any of the requested pins is already muxed */
++	spin_lock(&pio_lock);
++	if (unlikely(pio->pinmux_mask & pin_mask)) {
++		printk(KERN_WARNING "%s: pin(s) busy (req. 0x%x, busy 0x%x)\n",
++		       pio->name, pin_mask, pio->pinmux_mask & pin_mask);
++		spin_unlock(&pio_lock);
+ 		goto fail;
+ 	}
+ 
++	/* Reserve pins */
++	pio->pinmux_mask |= pin_mask;
++	spin_unlock(&pio_lock);
+ 	return;
+ 
+ fail:
+@@ -382,7 +421,6 @@ static int __init pio_probe(struct platform_device *pdev)
+ }
+ 
+ static struct platform_driver pio_driver = {
+-	.probe		= pio_probe,
+ 	.driver		= {
+ 		.name		= "pio",
+ 	},
+@@ -390,7 +428,7 @@ static struct platform_driver pio_driver = {
+ 
+ static int __init pio_init(void)
+ {
+-	return platform_driver_register(&pio_driver);
++	return platform_driver_probe(&pio_driver, pio_probe);
+ }
+ postcore_initcall(pio_init);
+ 
+diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S
+index 17503b0..3d210f8 100644
+--- a/arch/avr32/mach-at32ap/pm-at32ap700x.S
++++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S
+@@ -12,12 +12,9 @@
+ #include <asm/thread_info.h>
+ #include <mach/pm.h>
+ 
+-#include "pm.h"
++#include "pm-v1.h"
+ #include "sdramc.h"
+ 
+-/* Same as 0xfff00000 but fits in a 21 bit signed immediate */
+-#define PM_BASE	-0x100000
+-
+ 	.section .bss, "wa", @nobits
+ 	.global	disable_idle_sleep
+ 	.type	disable_idle_sleep, @object
+diff --git a/arch/avr32/mach-at32ap/pm-at32ap720x.S b/arch/avr32/mach-at32ap/pm-at32ap720x.S
+new file mode 100644
+index 0000000..a765aa5
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/pm-at32ap720x.S
+@@ -0,0 +1,110 @@
++/*
++ * Low-level Power Management code.
++ *
++ * Copyright (C) 2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <asm/asm.h>
++#include <asm/asm-offsets.h>
++#include <asm/thread_info.h>
++#include <mach/pm.h>
++
++#include "pm-v3.h"
++#include "sdramc.h"
++
++#ifdef CONFIG_PM
++	.section .init.text, "ax", @progbits
++
++	.global	pm_exception
++	.type	pm_exception, @function
++pm_exception:
++	/*
++	 * Exceptions are masked when we switch to this handler, so
++	 * we'll only get "unrecoverable" exceptions (offset 0.)
++	 */
++	sub	r12, pc, . - .Lpanic_msg
++	lddpc	pc, .Lpanic_addr
++
++	.align	2
++.Lpanic_addr:
++	.long	panic
++.Lpanic_msg:
++	.asciz	"Unrecoverable exception during suspend\n"
++	.size	pm_exception, . - pm_exception
++
++	.global	pm_irq0
++	.type	pm_irq0, @function
++pm_irq0:
++	/* Disable interrupts and return after the sleep instruction */
++	mfsr	r9, SYSREG_RSR_INT0
++	mtsr	SYSREG_RAR_INT0, r8
++	sbr	r9, SYSREG_GM_OFFSET
++	mtsr	SYSREG_RSR_INT0, r9
++	rete
++
++	/*
++	 * void cpu_enter_standby(unsigned long sdramc_base)
++	 *
++	 * Enter PM_SUSPEND_STANDBY mode. At this point, all drivers
++	 * are suspended and interrupts are disabled. Interrupts
++	 * marked as 'wakeup' event sources may still come along and
++	 * get us out of here.
++	 *
++	 * The SDRAM will be put into self-refresh mode (which does
++	 * not require a clock from the CPU), and the CPU will be put
++	 * into "frozen" mode (HSB bus stopped). The SDRAM controller
++	 * will automatically bring the SDRAM into normal mode on the
++	 * first access, and the power manager will automatically
++	 * start the HSB and CPU clocks upon a wakeup event.
++	 */
++	.global	pm_standby
++	.type	pm_standby, @function
++pm_standby:
++	/*
++	 * interrupts are already masked at this point, and EVBA
++	 * points to pm_exception above.
++	 */
++	ld.w	r10, r12[SDRAMC_LPR]
++	sub	r8, pc, . - 1f		/* return address for irq handler */
++	mov	r11, SDRAMC_LPR_LPCB_SELF_RFR
++	bfins	r10, r11, 0, 2		/* LPCB <- self Refresh */
++	sync	0			/* flush write buffer */
++	st.w	r12[SDRAMC_LPR], r10	/* put SDRAM in self-refresh mode */
++	ld.w	r11, r12[SDRAMC_LPR]
++	sleep	CPU_SLEEP_FROZEN | CPU_SLEEP_UNMASK_IRQ
++1:	mask_interrupts
++	retal	r12
++	.size	pm_standby, . - pm_standby
++
++	.global	pm_suspend_to_ram
++	.type	pm_suspend_to_ram, @function
++pm_suspend_to_ram:
++	/*
++	 * interrupts are already masked at this point, and EVBA
++	 * points to pm_exception above.
++	 */
++	mov	r11, 0
++	cache	r11[2], 8		/* clean all dcache lines */
++	sync	0			/* flush write buffer */
++	ld.w	r10, r12[SDRAMC_LPR]
++	sub	r8, pc, . - 1f		/* return address for irq handler */
++	mov	r11, SDRAMC_LPR_LPCB_SELF_RFR
++	bfins	r10, r11, 0, 2		/* LPCB <- self refresh */
++	st.w	r12[SDRAMC_LPR], r10	/* put SDRAM in self-refresh mode */
++	ld.w	r11, r12[SDRAMC_LPR]
++
++	sleep	CPU_SLEEP_STOP | CPU_SLEEP_UNMASK_IRQ
++1:	mask_interrupts
++
++	retal	r12
++	.size	pm_suspend_to_ram, . - pm_suspend_to_ram
++
++	.global	pm_sram_end
++	.type	pm_sram_end, @function
++pm_sram_end:
++	.size	pm_sram_end, 0
++
++#endif /* CONFIG_PM */
+diff --git a/arch/avr32/mach-at32ap/pm-v1.h b/arch/avr32/mach-at32ap/pm-v1.h
+new file mode 100644
+index 0000000..532a373
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/pm-v1.h
+@@ -0,0 +1,112 @@
++/*
++ * Register definitions for the Power Manager (PM)
++ */
++#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
++#define __ARCH_AVR32_MACH_AT32AP_PM_H__
++
++/* PM register offsets */
++#define PM_MCCTRL				0x0000
++#define PM_CKSEL				0x0004
++#define PM_CPU_MASK				0x0008
++#define PM_HSB_MASK				0x000c
++#define PM_PBA_MASK				0x0010
++#define PM_PBB_MASK				0x0014
++#define PM_PLL0					0x0020
++#define PM_PLL1					0x0024
++#define PM_IER					0x0040
++#define PM_IDR					0x0044
++#define PM_IMR					0x0048
++#define PM_ISR					0x004c
++#define PM_ICR					0x0050
++#define PM_GCCTRL(x)				(0x0060 + 4 * (x))
++#define PM_RCAUSE				0x00c0
++
++/* Bitfields in CKSEL */
++#define PM_CPUSEL_OFFSET			0
++#define PM_CPUSEL_SIZE				3
++#define PM_CPUDIV_OFFSET			7
++#define PM_CPUDIV_SIZE				1
++#define PM_HSBSEL_OFFSET			8
++#define PM_HSBSEL_SIZE				3
++#define PM_HSBDIV_OFFSET			15
++#define PM_HSBDIV_SIZE				1
++#define PM_PBASEL_OFFSET			16
++#define PM_PBASEL_SIZE				3
++#define PM_PBADIV_OFFSET			23
++#define PM_PBADIV_SIZE				1
++#define PM_PBBSEL_OFFSET			24
++#define PM_PBBSEL_SIZE				3
++#define PM_PBBDIV_OFFSET			31
++#define PM_PBBDIV_SIZE				1
++
++/* Bitfields in PLL0 */
++#define PM_PLLEN_OFFSET				0
++#define PM_PLLEN_SIZE				1
++#define PM_PLLOSC_OFFSET			1
++#define PM_PLLOSC_SIZE				1
++#define PM_PLLOPT_OFFSET			2
++#define PM_PLLOPT_SIZE				3
++#define PM_PLLDIV_OFFSET			8
++#define PM_PLLDIV_SIZE				8
++#define PM_PLLMUL_OFFSET			16
++#define PM_PLLMUL_SIZE				8
++#define PM_PLLCOUNT_OFFSET			24
++#define PM_PLLCOUNT_SIZE			6
++#define PM_PLLTEST_OFFSET			31
++#define PM_PLLTEST_SIZE				1
++
++/* Bitfields in ICR */
++#define PM_LOCK0_OFFSET				0
++#define PM_LOCK0_SIZE				1
++#define PM_LOCK1_OFFSET				1
++#define PM_LOCK1_SIZE				1
++#define PM_WAKE_OFFSET				2
++#define PM_WAKE_SIZE				1
++#define PM_CKRDY_OFFSET				5
++#define PM_CKRDY_SIZE				1
++#define PM_MSKRDY_OFFSET			6
++#define PM_MSKRDY_SIZE				1
++
++/* Bitfields in GCCTRL0 */
++#define PM_OSCSEL_OFFSET			0
++#define PM_OSCSEL_SIZE				1
++#define PM_PLLSEL_OFFSET			1
++#define PM_PLLSEL_SIZE				1
++#define PM_CEN_OFFSET				2
++#define PM_CEN_SIZE				1
++#define PM_DIVEN_OFFSET				4
++#define PM_DIVEN_SIZE				1
++#define PM_DIV_OFFSET				8
++#define PM_DIV_SIZE				8
++
++/* Bitfields in RCAUSE */
++#define PM_POR_OFFSET				0
++#define PM_POR_SIZE				1
++#define PM_EXT_OFFSET				2
++#define PM_EXT_SIZE				1
++#define PM_WDT_OFFSET				3
++#define PM_WDT_SIZE				1
++#define PM_NTAE_OFFSET				4
++#define PM_NTAE_SIZE				1
++
++/* Bit manipulation macros */
++#define PM_BIT(name)					\
++	(1 << PM_##name##_OFFSET)
++#define PM_BF(name,value)				\
++	(((value) & ((1 << PM_##name##_SIZE) - 1))	\
++	 << PM_##name##_OFFSET)
++#define PM_BFEXT(name,value)				\
++	(((value) >> PM_##name##_OFFSET)		\
++	 & ((1 << PM_##name##_SIZE) - 1))
++#define PM_BFINS(name,value,old)\
++	(((old) & ~(((1 << PM_##name##_SIZE) - 1)	\
++		    << PM_##name##_OFFSET))		\
++	 | PM_BF(name,value))
++
++/* Register access macros */
++#define pm_readl(reg)							\
++	__raw_readl((void __iomem __force *)PM_BASE + PM_##reg)
++#define pm_writel(reg,value)						\
++	__raw_writel((value), (void __iomem __force *)PM_BASE + PM_##reg)
++
++#endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */
+diff --git a/arch/avr32/mach-at32ap/pm-v3.h b/arch/avr32/mach-at32ap/pm-v3.h
+new file mode 100644
+index 0000000..3c507b9
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/pm-v3.h
+@@ -0,0 +1,283 @@
++/*
++ * Copyright (C) 2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __PM_V3_H__
++#define __PM_V3_H__
++
++#include <mach/chip.h>
++
++/* PM Register offsets */
++#ifndef __ASSEMBLY__
++struct pm_regs {
++	u32	MCCTRL;			/* Main Clock Control */
++	u32	CKSEL;			/* Clock Select */
++	u32	CPUMASK;		/* CPU Clock Mask */
++	u32	HSBMASK;		/* HSB Clock Mask */
++	u32	PBAMASK;		/* PBA Clock Mask */
++	u32	PBBMASK;		/* PBB Clock Mask */
++	u32	PBADIVMASK;		/* Divided PBA Clock Mask */
++	u32	PBBDIVMASK;		/* Divided PBB Clock Mask */
++	u32	__reserved1[8];
++	u32	PLL[3];			/* PLL Control */
++	u32	__reserved2[13];
++	u32	OSCCTRL[3];		/* Oscillator Control */
++	u32	__reserved3[5];
++	u32	OSCCTRL32;		/* 32 kHz Oscillator Control */
++	u32	__reserved4[7];
++	u32	IER;			/* Interrupt Enable */
++	u32	IDR;			/* Interrupt Disable */
++	u32	IMR;			/* Interrupt Mask */
++	u32	ISR;			/* Interrupt Status */
++	u32	ICR;			/* Interrupt Clear */
++	u32	POSCSR;			/* Power and Oscillator Status */
++	u32	__reserved5[10];
++	u32	GCCTRL[8];		/* Generic Clock Control */
++	u32	__reserved6[8];
++	u32	RCCR;			/* RC Oscillator Calibration */
++	u32	BGCR;			/* Bandgap Calibration */
++	u32	VREGCR;			/* Buck Regulator Calibration */
++	u32	BOD;			/* BOD Level */
++	u32	PPCR;			/* Peripheral Power Control */
++	u32	__reserved7[11];
++	u32	RCAUSE;			/* Reset Cause */
++	u32	WCAUSE;			/* Wake Cause */
++	u32	AWEN;			/* Asynchronous Wake Enable */
++	u32	__reserved8[14];
++	u32	GPLP;			/* General Purpose Low-Power */
++};
++#endif
++
++/* Assembly-friendly register offsets; same as above */
++#define PM_MCCTRL			0x0000
++#define PM_CKSEL			0x0004
++#define PM_CPUMASK			0x0008
++#define PM_HSBMASK			0x000c
++#define PM_PBAMASK			0x0010
++#define PM_PBBMASK			0x0014
++#define PM_PBADIVMASK			0x0018
++#define PM_PBBDIVMASK			0x001c
++#define PM_PLL0				0x0040
++#define PM_PLL1				0x0044
++#define PM_PLL2				0x0048
++#define PM_OSCCTRL0			0x0080
++#define PM_OSCCTRL1			0x0084
++#define PM_OSCCTRL2			0x0088
++#define PM_OSCCTRL32			0x00a0
++#define PM_IER				0x00c0
++#define PM_IDR				0x00c4
++#define PM_IMR				0x00c8
++#define PM_ISR				0x00cc
++#define PM_ICR				0x00d0
++#define PM_POSCSR			0x00d4
++#define PM_GCCTRL			0x0100
++#define PM_RCCR				0x0140
++#define PM_BGCR				0x0144
++#define PM_VREGCR			0x0148
++#define PM_BOD				0x014c
++#define PM_PPCR				0x0150
++#define PM_RC_RCAUSE			0x0180
++#define PM_WCAUSE			0x0184
++#define PM_AWEN				0x0188
++#define PM_GPLP				0x01c0
++
++/* Bits in MCCTRL */
++#define PM_MCCTRL_MCSEL_START		0
++#define PM_MCCTRL_MCSEL_SIZE		2
++#define PM_MCCTRL_OSC0EN_BIT		2
++#define PM_MCCTRL_OSC1EN_BIT		3
++#define PM_MCCTRL_OSC2EN_BIT		4
++#define PM_MCCTRL_CRIPEL_BIT		24
++
++/* Bits in CKSEL */
++#define PM_CKSEL_CPUSEL_START		0
++#define PM_CKSEL_CPUSEL_SIZE		3
++#define PM_CKSEL_CPUDIV_BIT		7
++#define PM_CKSEL_HSBSEL_START		8
++#define PM_CKSEL_HSBSEL_SIZE		3
++#define PM_CKSEL_HSBDIV_BIT		15
++#define PM_CKSEL_PBASEL_START		16
++#define PM_CKSEL_PBASEL_SIZE		3
++#define PM_CKSEL_PBADIV_BIT		23
++#define PM_CKSEL_PBBSEL_START		24
++#define PM_CKSEL_PBBSEL_SIZE		3
++#define PM_CKSEL_PBBDIV_BIT		31
++
++/* Bits in CPUMASK */
++#define PM_CPUMASK_SYSTIMER_BIT		16
++
++/* Bits in PLLx */
++#define PM_PLLx_PLLEN_BIT		0
++#define PM_PLLx_PLLOSC_START		1
++#define PM_PLLx_PLLOSC_SIZE		2
++#define PM_PLLx_PLLOPT_START		3
++#define PM_PLLx_PLLOPT_SIZE		3
++#define PM_PLLx_PLLBPL_BIT		7
++#define PM_PLLx_PLLDIV_START		8
++#define PM_PLLx_PLLDIV_SIZE		6
++#define PM_PLLx_PLLMUL_START		16
++#define PM_PLLx_PLLMUL_SIZE		6
++#define PM_PLLx_PLLCOUNT_START		24
++#define PM_PLLx_PLLCOUNT_SIZE		6
++#define PM_PLLx_PLLIOTESTEN_BIT		30
++#define PM_PLLx_PLLTEST_BIT		31
++
++/* Bits in OSCCTRLx */
++#define PM_OSCCTRLx_MODE_START		0
++#define PM_OSCCTRLx_MODE_SIZE		4
++#define PM_OSCCTRLx_STARTUP_START	8
++#define PM_OSCCTRLx_STARTUP_SIZE	3
++
++/* Bits in OSCCTRL32 */
++#define PM_OSCCTRL32_OSC32EN_BIT	0
++#define PM_OSCCTRL32_MODE_START		8
++#define PM_OSCCTRL32_MODE_SIZE		3
++#define PM_OSCCTRL32_STARTUP_START	16
++#define PM_OSCCTRL32_STARTUP_SIZE	3
++
++/* Bits in IER/IDR/IMR/ISR/ICR */
++#define PM_ISR_OSC0RDY_BIT		0
++#define PM_ISR_OSC1RDY_BIT		1
++#define PM_ISR_OSC2RDY_BIT		2
++#define PM_ISR_OSC32RDY_BIT		7
++#define PM_ISR_LOCK0_BIT		8
++#define PM_ISR_LOCK1_BIT		9
++#define PM_ISR_LOCK2_BIT		10
++#define PM_ISR_LOCK0LOST_BIT		16
++#define PM_ISR_LOCK1LOST_BIT		17
++#define PM_ISR_LOCK2LOST_BIT		18
++#define PM_ISR_CKRDY_BIT		24
++#define PM_ISR_MSKRDY_BIT		25
++#define PM_ISR_WAKE_BIT			26
++#define PM_ISR_BODDET_BIT		27
++#define PM_ISR_PERRDY_BIT		28
++
++/* Bits in POSCSR */
++#define PM_POSCSR_OSC0RDY_BIT		0
++#define PM_POSCSR_OSC1RDY_BIT		1
++#define PM_POSCSR_OSC32RDY_BIT		7
++#define PM_POSCSR_LOCK0_BIT		8
++#define PM_POSCSR_LOCK1_BIT		9
++#define PM_POSCSR_LOCK0LOST_BIT		16
++#define PM_POSCSR_LOCK1LOST_BIT		17
++#define PM_POSCSR_CKRDY_BIT		24
++#define PM_POSCSR_MSKRDY_BIT		25
++#define PM_POSCSR_WAKE_BIT		26
++#define PM_POSCSR_BODDET_BIT		27
++#define PM_POSCSR_PERRDY_BIT		28
++
++/* Bits in GCCTRL */
++#define PM_GCCTRL_CEN_BIT		0
++#define PM_GCCTRL_DIVEN_BIT		1
++#define PM_GCCTRL_OSCSEL_START		8
++#define PM_GCCTRL_OSCSEL_SIZE		4
++#define PM_GCCTRL_DIV_START		16
++#define PM_GCCTRL_DIV_SIZE		8
++
++/* Bits in RCCR */
++#define PM_RCCR_CALIB_START		0
++#define PM_RCCR_CALIB_SIZE		10
++#define PM_RCCR_FCD_BIT			16
++#define PM_RCCR_KEY_START		24
++#define PM_RCCR_KEY_SIZE		8
++
++/* Bits in BGCR */
++#define PM_BGCR_CALIB_START		0
++#define PM_BGCR_CALIB_SIZE		3
++#define PM_BGCR_FCD_BIT			16
++#define PM_BGCR_KEY_START		24
++#define PM_BGCR_KEY_SIZE		8
++
++/* Bits in VREGCR */
++#define PM_VREGCR_CALIB_START		0
++#define PM_VREGCR_CALIB_SIZE		3
++#define PM_VREGCR_FCD_BIT		16
++#define PM_VREGCR_KEY_START		24
++#define PM_VREGCR_KEY_SIZE		8
++
++/* Bits in BOD */
++#define PM_BOD_LEVEL_START		0
++#define PM_BOD_LEVEL_SIZE		6
++#define PM_BOD_HYST_BIT			6
++#define PM_BOD_CTRL_START		8
++#define PM_BOD_CTRL_SIZE		2
++#define PM_BOD_FCD_BIT			16
++#define PM_BOD_KEY_START		24
++#define PM_BOD_KEY_SIZE			8
++
++/* Bits in PPCR */
++#define PM_PPCR_EBI_VOLT_BIT		0
++#define PM_PPCR_UTMI_CTRL_BIT		1
++#define PM_PPCR_KEY_START		24
++#define PM_PPCR_KEY_SIZE		8
++
++/* Bits in RC_RCAUSE */
++#define PM_RC_RCAUSE_POR_BIT		0
++#define PM_RC_RCAUSE_BOD_BIT		1
++#define PM_RC_RCAUSE_EXT_BIT		2
++#define PM_RC_RCAUSE_WDT_BIT		3
++#define PM_RC_RCAUSE_JTAG_BIT		4
++#define PM_RC_RCAUSE_NTAE_BIT		5
++#define PM_RC_RCAUSE_SLEEP_BIT		6
++#define PM_RC_RCAUSE_CPUERR_BIT		7
++#define PM_RC_RCAUSE_OCDRST_BIT		8
++#define PM_RC_RCAUSE_JTAGHARD_BIT	9
++
++/* Bits in WCAUSE */
++#define PM_WCAUSE_PERIPH0_BIT		0
++#define PM_WCAUSE_PERIPH1_BIT		1
++#define PM_WCAUSE_EIC_BIT		16
++#define PM_WCAUSE_RTC_BIT		17
++
++/* Constants for MCCTRL:MCSEL */
++#define PM_MCSEL_SLOW			0
++#define PM_MCSEL_OSC0			1
++#define PM_MCSEL_PLL0			2
++
++/* Constants for OSCCTRLx:MODE */
++#define PM_MODE_EXT_CLOCK		0
++#define PM_MODE_CRYSTAL_ACG		1
++#define PM_MODE_CRYSTAL_G0		4
++#define PM_MODE_CRYSTAL_G1		5
++#define PM_MODE_CRYSTAL_G2		6
++#define PM_MODE_CRYSTAL_G3		7
++
++/* Constants for GCCTRL:OSCSEL */
++#define PM_OSCSEL_SLOW			0
++#define PM_OSCSEL_CLK32			1
++#define PM_OSCSEL_OSC0			2
++#define PM_OSCSEL_OSC1			3
++#define PM_OSCSEL_PLL0			4
++#define PM_OSCSEL_PLL1			5
++
++/* Constants for BOD:CTRL */
++#define PM_CTRL_OFF1			0
++#define PM_CTRL_ENABLED			1
++#define PM_CTRL_ENABLED_NORESET		2
++#define PM_CTRL_OFF2			3
++
++/* Bit manipulation macros */
++#define PM_BIT(name)						\
++	(1 << PM_##name##_BIT)
++#define PM_BF(name,value)					\
++	(((value) & ((1 << PM_##name##_SIZE) - 1))		\
++	 << PM_##name##_START)
++#define PM_BFEXT(name,value)					\
++	(((value) >> PM_##name##_START)				\
++	 & ((1 << PM_##name##_SIZE) - 1))
++#define PM_BFINS(name,value,old)				\
++	(((old) & ~(((1 << PM_##name##_SIZE) - 1)		\
++		    << PM_##name##_START))			\
++	 | PM_BF(name,value))
++
++/* Register access macros */
++#define __pm_regs ((struct pm_regs __iomem __force *)PM_BASE)
++#define pm_readl(reg)						\
++	__raw_readl(&__pm_regs->reg)
++#define pm_writel(reg, value)					\
++	__raw_writel(value, &__pm_regs->reg)
++
++#endif /* __PM_V3_H__ */
+diff --git a/arch/avr32/mach-at32ap/pm.h b/arch/avr32/mach-at32ap/pm.h
+deleted file mode 100644
+index 532a373..0000000
+--- a/arch/avr32/mach-at32ap/pm.h
++++ /dev/null
+@@ -1,112 +0,0 @@
+-/*
+- * Register definitions for the Power Manager (PM)
+- */
+-#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
+-#define __ARCH_AVR32_MACH_AT32AP_PM_H__
+-
+-/* PM register offsets */
+-#define PM_MCCTRL				0x0000
+-#define PM_CKSEL				0x0004
+-#define PM_CPU_MASK				0x0008
+-#define PM_HSB_MASK				0x000c
+-#define PM_PBA_MASK				0x0010
+-#define PM_PBB_MASK				0x0014
+-#define PM_PLL0					0x0020
+-#define PM_PLL1					0x0024
+-#define PM_IER					0x0040
+-#define PM_IDR					0x0044
+-#define PM_IMR					0x0048
+-#define PM_ISR					0x004c
+-#define PM_ICR					0x0050
+-#define PM_GCCTRL(x)				(0x0060 + 4 * (x))
+-#define PM_RCAUSE				0x00c0
+-
+-/* Bitfields in CKSEL */
+-#define PM_CPUSEL_OFFSET			0
+-#define PM_CPUSEL_SIZE				3
+-#define PM_CPUDIV_OFFSET			7
+-#define PM_CPUDIV_SIZE				1
+-#define PM_HSBSEL_OFFSET			8
+-#define PM_HSBSEL_SIZE				3
+-#define PM_HSBDIV_OFFSET			15
+-#define PM_HSBDIV_SIZE				1
+-#define PM_PBASEL_OFFSET			16
+-#define PM_PBASEL_SIZE				3
+-#define PM_PBADIV_OFFSET			23
+-#define PM_PBADIV_SIZE				1
+-#define PM_PBBSEL_OFFSET			24
+-#define PM_PBBSEL_SIZE				3
+-#define PM_PBBDIV_OFFSET			31
+-#define PM_PBBDIV_SIZE				1
+-
+-/* Bitfields in PLL0 */
+-#define PM_PLLEN_OFFSET				0
+-#define PM_PLLEN_SIZE				1
+-#define PM_PLLOSC_OFFSET			1
+-#define PM_PLLOSC_SIZE				1
+-#define PM_PLLOPT_OFFSET			2
+-#define PM_PLLOPT_SIZE				3
+-#define PM_PLLDIV_OFFSET			8
+-#define PM_PLLDIV_SIZE				8
+-#define PM_PLLMUL_OFFSET			16
+-#define PM_PLLMUL_SIZE				8
+-#define PM_PLLCOUNT_OFFSET			24
+-#define PM_PLLCOUNT_SIZE			6
+-#define PM_PLLTEST_OFFSET			31
+-#define PM_PLLTEST_SIZE				1
+-
+-/* Bitfields in ICR */
+-#define PM_LOCK0_OFFSET				0
+-#define PM_LOCK0_SIZE				1
+-#define PM_LOCK1_OFFSET				1
+-#define PM_LOCK1_SIZE				1
+-#define PM_WAKE_OFFSET				2
+-#define PM_WAKE_SIZE				1
+-#define PM_CKRDY_OFFSET				5
+-#define PM_CKRDY_SIZE				1
+-#define PM_MSKRDY_OFFSET			6
+-#define PM_MSKRDY_SIZE				1
+-
+-/* Bitfields in GCCTRL0 */
+-#define PM_OSCSEL_OFFSET			0
+-#define PM_OSCSEL_SIZE				1
+-#define PM_PLLSEL_OFFSET			1
+-#define PM_PLLSEL_SIZE				1
+-#define PM_CEN_OFFSET				2
+-#define PM_CEN_SIZE				1
+-#define PM_DIVEN_OFFSET				4
+-#define PM_DIVEN_SIZE				1
+-#define PM_DIV_OFFSET				8
+-#define PM_DIV_SIZE				8
+-
+-/* Bitfields in RCAUSE */
+-#define PM_POR_OFFSET				0
+-#define PM_POR_SIZE				1
+-#define PM_EXT_OFFSET				2
+-#define PM_EXT_SIZE				1
+-#define PM_WDT_OFFSET				3
+-#define PM_WDT_SIZE				1
+-#define PM_NTAE_OFFSET				4
+-#define PM_NTAE_SIZE				1
+-
+-/* Bit manipulation macros */
+-#define PM_BIT(name)					\
+-	(1 << PM_##name##_OFFSET)
+-#define PM_BF(name,value)				\
+-	(((value) & ((1 << PM_##name##_SIZE) - 1))	\
+-	 << PM_##name##_OFFSET)
+-#define PM_BFEXT(name,value)				\
+-	(((value) >> PM_##name##_OFFSET)		\
+-	 & ((1 << PM_##name##_SIZE) - 1))
+-#define PM_BFINS(name,value,old)\
+-	(((old) & ~(((1 << PM_##name##_SIZE) - 1)	\
+-		    << PM_##name##_OFFSET))		\
+-	 | PM_BF(name,value))
+-
+-/* Register access macros */
+-#define pm_readl(reg)							\
+-	__raw_readl((void __iomem __force *)PM_BASE + PM_##reg)
+-#define pm_writel(reg,value)						\
+-	__raw_writel((value), (void __iomem __force *)PM_BASE + PM_##reg)
+-
+-#endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */
+diff --git a/arch/avr32/mach-at32ap/sdc.h b/arch/avr32/mach-at32ap/sdc.h
+new file mode 100644
+index 0000000..6f5ec00
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/sdc.h
+@@ -0,0 +1,103 @@
++/* SDC */
++
++/* Register offsets */
++#define SDC_CTRL			0x0000
++#define SDC_ASYNC			0x0004
++#define SDC_SYNC			0x0008
++#define SDC_FILTERDUR			0x000c
++#define SDC_OSCCTRL32			0x0010
++#define SDC_STATUS			0x0014
++#define SDC_ECR				0x0018
++#define SDC_IER				0x001c
++#define SDC_IDR				0x0020
++#define SDC_IMR				0x0024
++#define SDC_GPLP			0x0040
++
++/* Bits in CTRL */
++#define SDC_CTRL_PIN_EN_BIT		0
++#define SDC_CTRL_AST_EN_BIT		8
++#define SDC_CTRL_WDT_EN_BIT		9
++#define SDC_CTRL_OCD_EN_BIT		10
++#define SDC_CTRL_JTAG_EN_BIT		11
++#define SDC_CTRL_CORE_POR_TEST_BIT	23
++#define SDC_CTRL_KEY_START		24
++#define SDC_CTRL_KEY_SIZE		8
++
++/* Bits in ASYNC */
++#define SDC_ASYNC_MODE_BIT		4
++#define SDC_ASYNC_POL_BIT		8
++#define SDC_ASYNC_KEY_START		24
++#define SDC_ASYNC_KEY_SIZE		8
++
++/* Bits in SYNC */
++#define SDC_SYNC_EN_BIT			0
++#define SDC_SYNC_MODE_BIT		4
++#define SDC_SYNC_POL_BIT		8
++#define SDC_SYNC_FILTER_BIT		12
++#define SDC_SYNC_KEY_START		24
++#define SDC_SYNC_KEY_SIZE		8
++
++/* Bits in FILTERDUR */
++#define SDC_FILTERDUR_Duration_START	0
++#define SDC_FILTERDUR_Duration_SIZE	16
++#define SDC_FILTERDUR_KEY_START		24
++#define SDC_FILTERDUR_KEY_SIZE		8
++
++/* Bits in OSCCTRL32 */
++#define SDC_OSCCTRL32_OSC32EN_BIT	0
++#define SDC_OSCCTRL32_MODE_START	8
++#define SDC_OSCCTRL32_MODE_SIZE		4
++#define SDC_OSCCTRL32_STARTUP_START	16
++#define SDC_OSCCTRL32_STARTUP_SIZE	3
++#define SDC_OSCCTRL32_KEY_START		24
++#define SDC_OSCCTRL32_KEY_SIZE		8
++
++/* Bits in STATUS */
++#define SDC_STATUS_PIN_EVENT_BIT	0
++#define SDC_STATUS_AST_EVENT_BIT	8
++#define SDC_STATUS_WDT_EVENT_BIT	9
++#define SDC_STATUS_OCD_EVENT_BIT	10
++#define SDC_STATUS_JTAG_EVENT_BIT	11
++#define SDC_STATUS_PIN_BIT		16
++#define SDC_STATUS_BUSY_BIT		24
++#define SDC_STATUS_SWTCH_BIT		30
++#define SDC_STATUS_VBAT_BIT		31
++
++/* Bits in ECR */
++#define SDC_ECR_PIN_EVENT_BIT		0
++#define SDC_ECR_AST_EVENT_BIT		8
++#define SDC_ECR_WDT_EVENT_BIT		9
++#define SDC_ECR_OCD_EVENT_BIT		10
++#define SDC_ECR_JTAG_EVENT_BIT		11
++
++/* Bits in IER */
++#define SDC_IER_PIN_EVENT_BIT		0
++#define SDC_IER_READY_BIT		24
++
++/* Bits in IDR */
++#define SDC_IDR_PIN_EVENT_BIT		0
++#define SDC_IDR_READY_BIT		24
++
++/* Bits in IMR */
++#define SDC_IMR_PIN_EVENT_BIT		0
++#define SDC_IMR_READY_BIT		24
++
++/* Bit manipulation macros */
++#define SDC_BIT(name)						\
++	(1 << SDC_##name##_BIT)
++#define SDC_BF(name,value)					\
++	(((value) & ((1 << SDC_##name##_SIZE) - 1))		\
++	 << SDC_##name##_START)
++#define SDC_BFEXT(name,value)					\
++	(((value) >> SDC_##name##_START)			\
++	 & ((1 << SDC_##name##_SIZE) - 1))
++#define SDC_BFINS(name,value,old)				\
++	(((old) & ~(((1 << SDC_##name##_SIZE) - 1)		\
++		    << SDC_##name##_START))			\
++	 | SDC_BF(name,value))
++
++/* Register access macros */
++#define sdc_readl(reg)						\
++	__raw_readl((void __iomem __force *)(SDC_BASE + SDC_##reg))
++#define sdc_writel(reg, value)					\
++	__raw_writel(value, (void __iomem __force *)(SDC_BASE + SDC_##reg))
+diff --git a/arch/avr32/mach-at32ap/timer-ast.c b/arch/avr32/mach-at32ap/timer-ast.c
+new file mode 100644
+index 0000000..0afff19
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/timer-ast.c
+@@ -0,0 +1,191 @@
++/*
++ * Asynchronous Timer (AST) used as clocksource / clockevent
++ *
++ * Copyright (C) 2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/clockchips.h>
++#include <linux/clocksource.h>
++#include <linux/interrupt.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/irq.h>
++#include <linux/platform_device.h>
++
++#include <asm/ast_regs.h>
++
++static void __iomem *ast_regs;
++
++static inline void ast_wait_ready(void)
++{
++	while (ast_readl(ast_regs, SR) & AST_BIT(BUSY))
++		cpu_relax();
++}
++
++static cycle_t read_ast_counter(void)
++{
++	return ast_readl(ast_regs, CV);
++}
++
++static struct clocksource ast_clksrc = {
++	.name	= "ast",
++	.rating	= 400,
++	.read	= read_ast_counter,
++	.mask	= CLOCKSOURCE_MASK(32),
++	.shift	= 16,
++	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
++};
++
++static irqreturn_t ast_clkevt_interrupt(int irq, void *dev_id)
++{
++	struct clock_event_device *clkevt = dev_id;
++
++	/*
++	 * We make sure delta is always long enough so that the BUSY
++	 * bit is never set at this point.
++	 */
++	ast_writel(ast_regs, SCR, AST_BIT(ALARM0));
++	clkevt->event_handler(clkevt);
++
++	return IRQ_HANDLED;
++}
++
++static struct irqaction ast_clkevt_irqaction = {
++	.handler	= ast_clkevt_interrupt,
++	.flags		= IRQF_TIMER | IRQF_DISABLED,
++	.name		= "timer-ast",
++};
++
++static int ast_next_event(unsigned long delta,
++		struct clock_event_device *clkevt)
++{
++	ast_wait_ready();
++	ast_writel(ast_regs, AR0, ast_readl(ast_regs, CV) + delta);
++
++	return 0;
++}
++
++static void ast_mode(enum clock_event_mode mode,
++		struct clock_event_device *evdev)
++{
++	switch (mode) {
++	case CLOCK_EVT_MODE_ONESHOT:
++	case CLOCK_EVT_MODE_RESUME:
++		/* Make sure we don't trigger an alarm before we get
++		 * around to reprogramming it.
++		 */
++		ast_wait_ready();
++		ast_writel(ast_regs, AR0, ast_readl(ast_regs, CV) - 1);
++		ast_wait_ready();
++		ast_writel(ast_regs, SCR, AST_BIT(ALARM0));
++		ast_wait_ready();
++		ast_writel(ast_regs, IER, AST_BIT(ALARM0));
++		break;
++	case CLOCK_EVT_MODE_UNUSED:
++	case CLOCK_EVT_MODE_SHUTDOWN:
++		ast_writel(ast_regs, IDR, AST_BIT(ALARM0));
++		break;
++	default:
++		BUG();
++	}
++}
++
++static struct clock_event_device ast_clkevt = {
++	.name		= "ast",
++	.features	= CLOCK_EVT_FEAT_ONESHOT,
++	.shift		= 16,
++	.rating		= 400,
++	.cpumask	= CPU_MASK_CPU0,
++	.set_next_event	= ast_next_event,
++	.set_mode	= ast_mode,
++};
++
++void __init ast_time_init(struct platform_device *pdev, unsigned int clksel)
++{
++	struct clk *clk, *pclk;
++	struct resource *regs;
++	unsigned long ast_hz;
++	int irq;
++	int ret;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs) {
++		pr_debug("AST: No MMIO resource\n");
++		return;
++	}
++
++	pclk = clk_get(&pdev->dev, "pclk");
++	if (!pclk) {
++		pr_debug("AST: No peripheral clock (pclk)\n");
++		return;
++	}
++	clk_enable(pclk);
++
++	/* Too early for ioremap() */
++	ast_regs = (void __iomem __force *)regs->start;
++
++	switch (clksel) {
++	case AST_CLOCK_SLOW:
++		clk = clk_get(NULL, "rcosc");
++		break;
++	case AST_CLOCK_OSC32:
++		clk = clk_get(NULL, "osc32");
++		break;
++	case AST_CLOCK_PB:
++		clk = pclk;
++		break;
++	case AST_CLOCK_GC:
++		clk = clk_get(&pdev->dev, "gclk");
++		break;
++	default:
++		clk = NULL;
++		break;
++	}
++
++	if (!clk) {
++		pr_debug("AST: clock %u invalid, using pb clock\n", clksel);
++		clk = pclk;
++	}
++	clk_enable(clk);
++
++	ast_writel(ast_regs, CLOCK,
++			AST_BF(CLOCK_CSSEL, clksel) | AST_BIT(CLOCK_CEN));
++	ast_writel(ast_regs, CR, AST_BIT(CR_EN) | AST_BIT(CR_PCLR));
++
++	/* Using hardcoded divide-by-two prescaler */
++	ast_hz = clk_get_rate(clk) / 2;
++	ast_clksrc.mult = clocksource_hz2mult(ast_hz, ast_clksrc.shift);
++
++	ret = clocksource_register(&ast_clksrc);
++	if (ret)
++		pr_debug("AST: could not register clocksource: %d\n", ret);
++
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0) {
++		pr_debug("AST: No IRQ resource, won't setup clockevent\n");
++		return;
++	}
++
++	ast_clkevt.mult = div_sc(ast_hz, NSEC_PER_SEC, ast_clkevt.shift);
++	ast_clkevt.max_delta_ns = clockevent_delta2ns((u32)~0U, &ast_clkevt);
++	ast_clkevt.min_delta_ns = clockevent_delta2ns(2, &ast_clkevt) + 100;
++
++	ast_clkevt_irqaction.dev_id = &ast_clkevt;
++
++	ret = setup_irq(irq, &ast_clkevt_irqaction);
++	if (ret) {
++		pr_debug("AST: Could not request IRQ %d: %d\n", irq, ret);
++		return;
++	}
++
++	clockevents_register_device(&ast_clkevt);
++
++	pr_info("Using Asynchronous Timer %d @ %lu.%03lu Mhz"
++			" (regs 0x%p, irq %d)\n",
++			pdev->id, ((ast_hz + 500) / 1000) / 1000,
++			((ast_hz + 500) / 1000) % 1000, ast_regs, irq);
++}
+diff --git a/arch/avr32/mm/tlb.c b/arch/avr32/mm/tlb.c
+index 06677be..cede41b 100644
+--- a/arch/avr32/mm/tlb.c
++++ b/arch/avr32/mm/tlb.c
+@@ -12,7 +12,13 @@
+ #include <asm/mmu_context.h>
+ 
+ /* TODO: Get the correct number from the CONFIG1 system register */
+-#define NR_TLB_ENTRIES 32
++#if defined(CONFIG_CPU_AT32AP700X)
++# define NR_TLB_ENTRIES 32
++#elif defined(CONFIG_CPU_AT32AP720X)
++# define NR_TLB_ENTRIES 64
++#else
++# error Unknown CPU type
++#endif
+ 
+ static void show_dtlb_entry(unsigned int index)
+ {
+@@ -85,9 +91,15 @@ static void update_dtlb(unsigned long address, pte_t pte)
+ 		u32 tlbar = sysreg_read(TLBARLO);
+ 
+ 		rp = 32 - fls(tlbar);
+-		if (rp == 32) {
++		if (NR_TLB_ENTRIES > 32 && rp >= 32) {
++			tlbar = sysreg_read(TLBARHI);
++			rp = 64 - fls(tlbar);
++		}
++		if (rp >= NR_TLB_ENTRIES) {
+ 			rp = 0;
+ 			sysreg_write(TLBARLO, -1L);
++			if (NR_TLB_ENTRIES > 32)
++				sysreg_write(TLBARHI, -1L);
+ 		}
+ 
+ 		mmucr = SYSREG_BFINS(DRP, rp, mmucr);
+@@ -131,16 +143,22 @@ static void __flush_tlb_page(unsigned long asid, unsigned long page)
+ 
+ 	if (!(mmucr & SYSREG_BIT(MMUCR_N))) {
+ 		unsigned int entry;
+-		u32 tlbarlo;
++		u32 tlbarlo, tlbarhi;
+ 
+ 		/* Clear the "valid" bit */
+ 		sysreg_write(TLBEHI, tlbehi);
+ 
+ 		/* mark the entry as "not accessed" */
+ 		entry = SYSREG_BFEXT(DRP, mmucr);
+-		tlbarlo = sysreg_read(TLBARLO);
+-		tlbarlo |= (0x80000000UL >> entry);
+-		sysreg_write(TLBARLO, tlbarlo);
++		if (NR_TLB_ENTRIES > 32 && entry > 32) {
++			tlbarhi = sysreg_read(TLBARHI);
++			tlbarhi |= (0x80000000UL >> (entry - 32));
++			sysreg_write(TLBARHI, tlbarhi);
++		} else {
++			tlbarlo = sysreg_read(TLBARLO);
++			tlbarlo |= (0x80000000UL >> entry);
++			sysreg_write(TLBARLO, tlbarlo);
++		}
+ 
+ 		/* update the entry with valid bit clear */
+ 		__builtin_tlbw();
+@@ -179,9 +197,10 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ 		unsigned long flags;
+ 		int size;
+ 
+-		local_irq_save(flags);
+ 		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+ 
++		local_irq_save(flags);
++
+ 		if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
+ 			mm->context = NO_CONTEXT;
+ 			if (mm == current->mm)
+diff --git a/arch/avr32/oprofile/Makefile b/arch/avr32/oprofile/Makefile
+index 1fe81c3..e0eb520 100644
+--- a/arch/avr32/oprofile/Makefile
++++ b/arch/avr32/oprofile/Makefile
+@@ -5,4 +5,4 @@ oprofile-y		:= $(addprefix ../../../drivers/oprofile/,	\
+ 				event_buffer.o oprofile_files.o		\
+ 				oprofilefs.o oprofile_stats.o		\
+ 				timer_int.o)
+-oprofile-y		+= op_model_avr32.o
++oprofile-y		+= op_model_avr32.o backtrace.o
+diff --git a/arch/avr32/oprofile/backtrace.c b/arch/avr32/oprofile/backtrace.c
+new file mode 100644
+index 0000000..75d9ad6
+--- /dev/null
++++ b/arch/avr32/oprofile/backtrace.c
+@@ -0,0 +1,81 @@
++/*
++ * AVR32 specific backtracing code for oprofile
++ *
++ * Copyright 2008 Weinmann GmbH
++ *
++ * Author: Nikolaus Voss <n.voss@weinmann.de>
++ *
++ * Based on i386 oprofile backtrace code by John Levon and David Smith
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/oprofile.h>
++#include <linux/sched.h>
++#include <linux/uaccess.h>
++
++/* The first two words of each frame on the stack look like this if we have
++ * frame pointers */
++struct frame_head {
++	unsigned long lr;
++	struct frame_head *fp;
++};
++
++/* copied from arch/avr32/kernel/process.c */
++static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p)
++{
++	return (p > (unsigned long)tinfo)
++		&& (p < (unsigned long)tinfo + THREAD_SIZE - 3);
++}
++
++/* copied from arch/x86/oprofile/backtrace.c */
++static struct frame_head *dump_user_backtrace(struct frame_head *head)
++{
++	struct frame_head bufhead[2];
++
++	/* Also check accessibility of one struct frame_head beyond */
++	if (!access_ok(VERIFY_READ, head, sizeof(bufhead)))
++		return NULL;
++	if (__copy_from_user_inatomic(bufhead, head, sizeof(bufhead)))
++		return NULL;
++
++	oprofile_add_trace(bufhead[0].lr);
++
++	/* frame pointers should strictly progress back up the stack
++	 * (towards higher addresses) */
++	if (bufhead[0].fp <= head)
++		return NULL;
++
++	return bufhead[0].fp;
++}
++
++void avr32_backtrace(struct pt_regs * const regs, unsigned int depth)
++{
++	/* Get first frame pointer */
++	struct frame_head *head = (struct frame_head *)(regs->r7);
++
++	if (!user_mode(regs)) {
++#ifdef CONFIG_FRAME_POINTER
++		/*
++		 * Traverse the kernel stack from frame to frame up to
++		 * "depth" steps.
++		 */
++		while (depth-- && valid_stack_ptr(task_thread_info(current),
++						  (unsigned long)head)) {
++			oprofile_add_trace(head->lr);
++			if (head->fp <= head)
++				break;
++			head = head->fp;
++		}
++#endif
++	} else {
++		/* Assume we have frame pointers in user mode process */
++		while (depth-- && head)
++			head = dump_user_backtrace(head);
++	}
++}
++
++
+diff --git a/arch/avr32/oprofile/op_model_avr32.c b/arch/avr32/oprofile/op_model_avr32.c
+index df42325..a3e9b3c 100644
+--- a/arch/avr32/oprofile/op_model_avr32.c
++++ b/arch/avr32/oprofile/op_model_avr32.c
+@@ -22,6 +22,8 @@
+ #define AVR32_PERFCTR_IRQ_GROUP	0
+ #define AVR32_PERFCTR_IRQ_LINE	1
+ 
++void avr32_backtrace(struct pt_regs * const regs, unsigned int depth);
++
+ enum { PCCNT, PCNT0, PCNT1, NR_counter };
+ 
+ struct avr32_perf_counter {
+@@ -223,6 +225,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
+ 	memcpy(ops, &avr32_perf_counter_ops,
+ 			sizeof(struct oprofile_operations));
+ 
++	ops->backtrace = avr32_backtrace;
++
+ 	printk(KERN_INFO "oprofile: using AVR32 performance monitoring.\n");
+ 
+ 	return 0;
+diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
+index cd30390..9322b91 100644
+--- a/drivers/dma/Kconfig
++++ b/drivers/dma/Kconfig
+@@ -38,6 +38,20 @@ config INTEL_IOP_ADMA
+ 	help
+ 	  Enable support for the Intel(R) IOP Series RAID engines.
+ 
++config ATMEL_PDCA
++	tristate "Atmel Peripheral DMA Controller A support"
++	depends on AVR32
++	select DMA_ENGINE
++	default y if CPU_AT32AP7200
++	help
++	  Support the Atmel Peripheral DMA Controller found on AVR32
++	  UC3 chips as well as newer AP7 chips. This controller is
++	  similar to the PDC found on AT32AP7000 and various AT91
++	  chips, but has its own register bank.
++
++	  This controller only supports peripheral (slave) transfers,
++	  not memory-to-memory transfers.
++
+ config DW_DMAC
+ 	tristate "Synopsys DesignWare AHB DMA support"
+ 	depends on AVR32
+diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
+index 14f5952..1623a6d 100644
+--- a/drivers/dma/Makefile
++++ b/drivers/dma/Makefile
+@@ -4,6 +4,7 @@ obj-$(CONFIG_DMATEST) += dmatest.o
+ obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o
+ ioatdma-objs := ioat.o ioat_dma.o ioat_dca.o
+ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
++obj-$(CONFIG_ATMEL_PDCA) += atmel_pdca.o
+ obj-$(CONFIG_FSL_DMA) += fsldma.o
+ obj-$(CONFIG_MV_XOR) += mv_xor.o
+ obj-$(CONFIG_DW_DMAC) += dw_dmac.o
+diff --git a/drivers/dma/atmel_pdca.c b/drivers/dma/atmel_pdca.c
+new file mode 100644
+index 0000000..0d2f49f
+--- /dev/null
++++ b/drivers/dma/atmel_pdca.c
+@@ -0,0 +1,668 @@
++/*
++ * Driver for the Atmel PDCA Peripheral DMA Controller
++ *
++ * Copyright (C) 2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#define DEBUG
++#include <linux/atmel_pdca.h>
++#include <linux/clk.h>
++#include <linux/dmaengine.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/list.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/scatterlist.h>
++#include <linux/spinlock.h>
++
++/*
++ * Since each descriptor can hold a whole scatterlist, we don't need
++ * many of them.
++ */
++#define NR_DESCS_PER_CHANNEL	8
++
++static struct pdca_desc *pdca_desc_entry(struct list_head *node)
++{
++	return list_entry(node, struct pdca_desc, desc_node);
++}
++
++static struct pdca_desc *pdca_next_desc(struct pdca_chan *pch,
++		struct pdca_desc *desc)
++{
++	if (desc->desc_node.next != &pch->queue)
++		return pdca_desc_entry(desc->desc_node.next);
++	return NULL;
++}
++
++static struct pdca_desc *pdca_desc_get(struct pdca_chan *pch)
++{
++	struct pdca_desc		*desc = NULL;
++
++	spin_lock_bh(&pch->lock);
++	if (likely(!list_empty(&pch->freelist))) {
++		desc = pdca_desc_entry(pch->freelist.next);
++		list_del(&desc->desc_node);
++	}
++	spin_unlock_bh(&pch->lock);
++
++	return desc;
++}
++
++static dma_cookie_t pdca_assign_cookie(struct pdca_chan *pch,
++		struct pdca_desc *desc)
++{
++	dma_cookie_t cookie = pch->chan.cookie;
++
++	if (++cookie < 0)
++		cookie = 1;
++
++	pch->chan.cookie = cookie;
++	desc->txd.cookie = cookie;
++
++	return cookie;
++}
++
++static void pdca_desc_done(struct pdca_chan *pch, struct pdca_desc *desc)
++{
++	struct dma_async_tx_descriptor	*txd = &desc->txd;
++	dma_async_tx_callback		callback;
++	void				*param;
++
++	pch->completed = txd->cookie;
++	callback = txd->callback;
++	param = txd->callback_param;
++
++	dev_vdbg(&pch->chan.dev, "  completed %u\n", txd->cookie);
++
++	/*
++	 * We can only handle scatterlists, so this is easy. No other
++	 * drivers do the right thing with scatterlists though...
++	 *
++	 * Note that we ensure that at least one of these flags are
++	 * set when the descriptor is prepared, as we never need to
++	 * unmap the peripheral side.
++	 */
++	if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP))
++		dma_unmap_sg(pch->chan.dev.parent, desc->sg, desc->sg_len,
++				DMA_FROM_DEVICE);
++	if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP))
++		dma_unmap_sg(pch->chan.dev.parent, desc->sg, desc->sg_len,
++				DMA_TO_DEVICE);
++
++	list_move(&desc->desc_node, &pch->freelist);
++
++	if (callback)
++		callback(param);
++}
++
++static void pdca_chan_tasklet(unsigned long param)
++{
++	struct pdca_chan		*pch = (struct pdca_chan *)param;
++	void __iomem			*regs = pch->regs;
++	struct pdca_desc		*cur;
++	struct pdca_desc		*next;
++	struct scatterlist		*cur_sg;
++	struct scatterlist		*next_sg;
++	u32				intflags;
++	u32				status;
++
++	spin_lock(&pch->lock);
++
++	cur = pdca_desc_entry(pch->queue.next);
++	next = pdca_next_desc(pch, cur);
++
++	cur_sg = pch->cur_sg;
++	next_sg = pch->next_sg;
++
++	intflags = PDCA_TERR | PDCA_TRC | PDCA_RCZ;
++
++	status = pdca_readl(regs, ISR);
++	dev_vdbg(&pch->chan.dev, "tasklet: status=%08x\n", status);
++
++	if (status & PDCA_TRC) {
++		if (cur_sg) {
++			if (sg_is_last(cur_sg)) {
++				dev_vdbg(&pch->chan.dev,
++						"  cur sg was last in %u\n",
++						cur->txd.cookie);
++				pdca_desc_done(pch, cur);
++				cur = next;
++				next = NULL;
++			}
++			if (next_sg && sg_is_last(next_sg)) {
++				dev_vdbg(&pch->chan.dev,
++						"  next sg was last in %u\n",
++						cur->txd.cookie);
++				pdca_desc_done(pch, cur);
++				cur = next;
++				next = NULL;
++			}
++			if (!cur) {
++				dev_vdbg(&pch->chan.dev, "  all done\n");
++				pdca_writel(regs, CR, PDCA_CR_TDIS);
++				cur_sg = next_sg = NULL;
++				intflags = 0;
++				goto done;
++			}
++			cur_sg = next_sg ? sg_next(next_sg) : NULL;
++		}
++
++		if (!cur_sg) {
++			dev_vdbg(&pch->chan.dev, "  load sg from %u\n",
++					cur->txd.cookie);
++			cur_sg = cur->sg;
++			pdca_writel(regs, PSR, cur->periph_id);
++			pdca_writel(regs, MR, cur->reg_width);
++		}
++		dev_vdbg(&pch->chan.dev, "  START: %08x count: %08x\n",
++				sg_dma_address(cur_sg),
++				sg_dma_len(cur_sg) >> cur->reg_width);
++		pdca_writel(regs, MAR, sg_dma_address(cur_sg));
++		pdca_writel(regs, TCR, sg_dma_len(cur_sg) >> cur->reg_width);
++
++		next_sg = sg_next(cur_sg);
++		if (!next_sg) {
++			next = pdca_next_desc(pch, cur);
++			if (next && next->reg_width == cur->reg_width
++					&& next->periph_id == cur->periph_id) {
++				dev_vdbg(&pch->chan.dev,
++						"loading next_sg from %u\n",
++						next->txd.cookie);
++				next_sg = next->sg;
++			}
++		}
++		if (next_sg) {
++			dev_vdbg(&pch->chan.dev, "  NEXT: %08x count: %08x\n",
++					sg_dma_address(next_sg),
++					sg_dma_len(next_sg) >> cur->reg_width);
++			pdca_writel(regs, MARR, sg_dma_address(next_sg));
++			pdca_writel(regs, TCRR,
++					sg_dma_len(next_sg) >> cur->reg_width);
++		} else {
++			intflags &= ~PDCA_RCZ;
++		}
++	} else if (next_sg && (status & PDCA_RCZ)) {
++		if (sg_is_last(cur_sg)) {
++			dev_vdbg(&pch->chan.dev, "  cur sg was last in %u\n",
++					cur->txd.cookie);
++			next = pdca_next_desc(pch, cur);
++			pdca_desc_done(pch, cur);
++			cur = next;
++			next = NULL;
++		}
++
++		cur_sg = next_sg;
++		next_sg = sg_next(cur_sg);
++		if (!next_sg) {
++			next = pdca_next_desc(pch, cur);
++			if (next && next->reg_width == cur->reg_width
++					&& next->periph_id == cur->periph_id)
++				next_sg = next->sg;
++		}
++
++		if (next_sg) {
++			dev_vdbg(&pch->chan.dev, "  NEXT: %08x count: %08x\n",
++					sg_dma_address(next_sg),
++					sg_dma_len(next_sg) >> cur->reg_width);
++			pdca_writel(regs, MARR, sg_dma_address(next_sg));
++			pdca_writel(regs, TCRR,
++					sg_dma_len(next_sg) >> cur->reg_width);
++		} else {
++			dev_vdbg(&pch->chan.dev, "  no next sg\n");
++			intflags &= ~PDCA_RCZ;
++		}
++	}
++
++done:
++	if (status & PDCA_TERR) {
++		/*
++		 * Head of queue is busted. We must remove it, clear
++		 * the error and restart the queue.
++		 */
++		pdca_writel(regs, TCRR, 0);
++		pdca_writel(regs, TCR, 0);
++		pdca_writel(regs, CR, PDCA_CR_ECLR);
++		cur_sg = next_sg = NULL;
++
++		if (!cur)
++			dev_err(&pch->chan.dev,
++					"Transfer Error with empty queue\n");
++		else {
++			dev_vdbg(&pch->chan.dev,
++					"  %u is busted\n", cur->txd.cookie);
++			pdca_desc_done(pch, cur);
++		}
++
++		if (list_empty(&pch->queue)) {
++			pdca_writel(regs, CR, PDCA_CR_TDIS);
++			intflags = 0;
++		}
++	}
++
++	pch->cur_sg = cur_sg;
++	pch->next_sg = next_sg;
++
++	dev_vdbg(&pch->chan.dev, "  enabling interrupts: %08x\n", intflags);
++	pdca_writel(regs, IER, intflags);
++	pdca_readl(regs, SR);
++
++	spin_unlock(&pch->lock);
++}
++
++static irqreturn_t pdca_interrupt(int irq, void *dev_id)
++{
++	struct pdca_dev			*pdca = dev_id;
++	struct pdca_chan		*pch;
++	void __iomem			*regs;
++	unsigned long			pending;
++	unsigned int			chan;
++
++	pending = intc_get_pending(irq);
++	if (unlikely(!pending))
++		return IRQ_NONE;
++
++	do {
++		chan = __ffs(pending);
++		pch = &pdca->chan[chan];
++		regs = pch->regs;
++		pdca_writel(regs, IDR, ~0UL);
++		tasklet_schedule(&pch->tasklet);
++		pdca_readl(regs, IMR);
++		pending &= ~(1 << chan);
++	} while (pending);
++
++	return IRQ_HANDLED;
++}
++
++static dma_cookie_t pdca_tx_submit(struct dma_async_tx_descriptor *txd)
++{
++	struct pdca_desc		*desc = txd_to_pdca_desc(txd);
++	struct pdca_chan		*pch = dma_to_pdca_chan(txd->chan);
++	void __iomem			*regs = pch->regs;
++	dma_cookie_t			cookie;
++
++	spin_lock_bh(&pch->lock);
++	cookie = pdca_assign_cookie(pch, desc);
++	dev_vdbg(&pch->chan.dev, "submitted %u\n", cookie);
++	list_add_tail(&desc->desc_node, &pch->queue);
++	pdca_writel(regs, CR, PDCA_CR_TEN);
++	pdca_writel(regs, IER, PDCA_TERR | PDCA_RCZ);
++	/* The tasklet will kickstart the queue if necessary */
++	spin_unlock_bh(&pch->lock);
++
++	return cookie;
++}
++
++static struct dma_async_tx_descriptor *pdca_prep_slave_sg(struct dma_chan *chan,
++		struct scatterlist *sgl, unsigned int sg_len,
++		enum dma_data_direction direction, unsigned long flags)
++{
++	struct pdca_chan		*pch = dma_to_pdca_chan(chan);
++	struct pdca_slave		*pslave = pch->pslave;
++	struct pdca_desc		*desc;
++	unsigned int			periph_id;
++
++	dev_vdbg(&chan->dev, "prep_dma_slave: %s %u segments, flags: %lx\n",
++			direction == DMA_TO_DEVICE ? "OUT" : "IN",
++			sg_len, flags);
++
++	switch (direction) {
++	case DMA_TO_DEVICE:
++		periph_id = pslave->tx_periph_id;
++		flags |= DMA_COMPL_SKIP_DEST_UNMAP;
++		break;
++	case DMA_FROM_DEVICE:
++		periph_id = pslave->rx_periph_id;
++		flags |= DMA_COMPL_SKIP_SRC_UNMAP;
++		break;
++	default:
++		return NULL;
++	}
++
++	desc = pdca_desc_get(pch);
++	if (!desc) {
++		dev_err(&chan->dev,
++			"not enough descriptors available\n");
++		return NULL;
++	}
++	desc->sg = sgl;
++	desc->sg_len = sg_len;
++	desc->periph_id = periph_id;
++	desc->reg_width = pslave->slave.reg_width;
++	desc->txd.flags = flags;
++
++	return &desc->txd;
++}
++
++static void pdca_terminate_all(struct dma_chan *chan)
++{
++	struct pdca_chan		*pch = dma_to_pdca_chan(chan);
++	struct pdca_desc		*desc, *_desc;
++	void __iomem			*regs = pch->regs;
++
++	spin_lock_bh(&pch->lock);
++	pdca_writel(regs, CR, PDCA_CR_TDIS);
++	pdca_writel(regs, TCRR, 0);
++	pdca_writel(regs, TCR, 0);
++	while (pdca_readl(regs, SR) & PDCA_SR_TEN)
++		cpu_relax();
++
++	list_for_each_entry_safe(desc, _desc, &pch->queue, desc_node)
++		pdca_desc_done(pch, desc);
++	spin_unlock_bh(&pch->lock);
++}
++
++static enum dma_status pdca_is_tx_complete(struct dma_chan *chan,
++		dma_cookie_t cookie, dma_cookie_t *done, dma_cookie_t *used)
++{
++	struct pdca_chan		*pch = dma_to_pdca_chan(chan);
++	dma_cookie_t			last_used;
++	dma_cookie_t			last_complete;
++
++	last_complete = pch->completed;
++	last_used = chan->cookie;
++
++	if (done)
++		*done = last_complete;
++	if (used)
++		*used = last_used;
++
++	return dma_async_is_complete(cookie, last_complete, last_used);
++}
++
++static void pdca_issue_pending(struct dma_chan *chan)
++{
++	/* We always issue descriptors ASAP */
++}
++
++static int pdca_alloc_chan_resources(struct dma_chan *chan,
++		struct dma_client *client)
++{
++	struct pdca_chan		*pch = dma_to_pdca_chan(chan);
++	struct pdca_dev			*pdca = dma_to_pdca_dev(chan->device);
++	struct dma_slave		*slave = client->slave;
++	void __iomem			*regs = pch->regs;
++
++	/*
++	 * Channels doing slave DMA can only handle one client. This
++	 * controller can only do slave DMA.
++	 */
++	if (chan->client_count)
++		return -EBUSY;
++	if (!slave || !slave->dma_dev || slave->dma_dev != pdca->dma.dev)
++		return -EINVAL;
++
++	if (pdca_readl(regs, SR) & PDCA_SR_TEN)
++		dev_err(&chan->dev, "DMA channel not idle!\n");
++
++	/*
++	 * We may get called multiple times if a client rejects the
++	 * channel...
++	 */
++	if (!pch->enabled) {
++		pch->enabled = true;
++		clk_enable(pdca->pclk);
++		clk_enable(pdca->hclk);
++	}
++
++	pch->chan.cookie = pch->completed = 1;
++	pch->pslave = dma_to_pdca_slave(slave);
++
++	while (pch->descs_allocated < NR_DESCS_PER_CHANNEL) {
++		struct pdca_desc	*desc;
++
++		desc = kzalloc(sizeof(struct pdca_desc), GFP_KERNEL);
++		if (!desc) {
++			dev_info(&chan->dev, "only allocated %d descriptors\n",
++					pch->descs_allocated);
++			break;
++		}
++
++		dma_async_tx_descriptor_init(&desc->txd, chan);
++		desc->txd.tx_submit = pdca_tx_submit;
++		desc->txd.flags = DMA_CTRL_ACK;
++		INIT_LIST_HEAD(&desc->txd.tx_list);
++		list_add(&desc->desc_node, &pch->freelist);
++		pch->descs_allocated++;
++	}
++
++	return pch->descs_allocated ? 0 : -ENOMEM;
++}
++
++static void pdca_free_chan_resources(struct dma_chan *chan)
++{
++	struct pdca_chan		*pch = dma_to_pdca_chan(chan);
++	struct pdca_dev			*pdca = dma_to_pdca_dev(chan->device);
++	struct pdca_desc		*desc, *_desc;
++
++	WARN_ON(!list_empty(&pch->queue));
++	WARN_ON(pdca_readl(pch->regs, SR) & PDCA_SR_TEN);
++	WARN_ON(pdca_readl(pch->regs, IMR));
++
++	clk_disable(pdca->hclk);
++	clk_disable(pdca->pclk);
++	pch->enabled = false;
++
++	list_for_each_entry_safe(desc, _desc, &pch->freelist, desc_node) {
++		list_del(&desc->desc_node);
++		kfree(desc);
++	}
++
++	pch->descs_allocated = 0;
++}
++
++static void pdca_suspend_channel(struct pdca_dev *pdca, struct pdca_chan *pch)
++{
++	void __iomem			*regs = pch->regs;
++
++	/*
++	 * REVISIT this whole business.
++	 *
++	 * The plan is to ensure that the PDCA doesn't do any bus
++	 * transactions when we're suspended or shut down. Ideally,
++	 * the client should make sure that all transfers have already
++	 * been completed or terminated when we reach suspend_late(),
++	 * but just in case that didn't happen, we should just stop
++	 * the controller and turn it back on when resuming. Hopefully
++	 * it will simply continue where it left off.
++	 *
++	 * We _probably_ need to save some sort of state to make this
++	 * happen. Or we can just rely on interrupts being globally
++	 * disabled at least until we reach resume_early. But that
++	 * might not be the case for shutdown.
++	 */
++	tasklet_kill(&pch->tasklet);
++	spin_lock_bh(&pch->lock);
++	if (pdca_readl(regs, SR) & PDCA_SR_TEN) {
++		pdca_writel(regs, CR, PDCA_CR_TDIS);
++		while (pdca_readl(regs, SR) & PDCA_SR_TEN)
++			cpu_relax();
++
++		clk_disable(pdca->hclk);
++		clk_disable(pdca->pclk);
++	}
++	spin_unlock_bh(&pch->lock);
++}
++
++static void __init pdca_init_channel(struct pdca_dev *pdca, unsigned int i)
++{
++	struct pdca_chan		*pch = &pdca->chan[i];
++
++	pch->chan.device = &pdca->dma;
++	pch->chan.chan_id = i;
++	pch->regs = pdca->regs + i * PDCA_CHAN_SIZE;
++	tasklet_init(&pch->tasklet, pdca_chan_tasklet, (unsigned long)pch);
++	spin_lock_init(&pch->lock);
++	INIT_LIST_HEAD(&pch->freelist);
++	INIT_LIST_HEAD(&pch->queue);
++
++	list_add_tail(&pch->chan.device_node, &pdca->dma.channels);
++}
++
++static int __init pdca_probe(struct platform_device *pdev)
++{
++	struct pdca_pdata		*pdata;
++	struct resource			*mmio;
++	struct pdca_dev			*pdca;
++	size_t				mmio_len;
++	size_t				size;
++	unsigned int			i;
++	int				irq;
++	int				ret;
++
++	pdata = pdev->dev.platform_data;
++	mmio = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	irq = platform_get_irq(pdev, 0);
++	if (!pdata || pdata->nr_channels > 32 || !mmio || !irq) {
++		dev_dbg(&pdev->dev, "invalid params from platform code\n");
++		return -EINVAL;
++	}
++
++	mmio_len = mmio->end - mmio->start + 1;
++	if (!request_mem_region(mmio->start, mmio_len, "atmel_pdca")) {
++		dev_dbg(&pdev->dev, "mmio resource busy\n");
++		return -EBUSY;
++	}
++
++	size = sizeof(struct pdca_dev);
++	size += pdata->nr_channels * sizeof(struct pdca_chan);
++	pdca = kzalloc(size, GFP_KERNEL);
++	if (!pdca) {
++		dev_dbg(&pdev->dev, "insufficient memory\n");
++		ret = -ENOMEM;
++		goto err_alloc_pdca;
++	}
++
++	pdca->hclk = clk_get(&pdev->dev, "hclk");
++	if (IS_ERR(pdca->hclk)) {
++		dev_dbg(&pdev->dev, "no HSB clock\n");
++		ret = PTR_ERR(pdca->hclk);
++		goto err_get_hclk;
++	}
++	pdca->pclk = clk_get(&pdev->dev, "pclk");
++	if (IS_ERR(pdca->pclk)) {
++		dev_dbg(&pdev->dev, "no PB clock\n");
++		ret = PTR_ERR(pdca->pclk);
++		goto err_get_pclk;
++	}
++
++	pdca->regs = ioremap(mmio->start, mmio_len);
++	if (!pdca->regs) {
++		dev_dbg(&pdev->dev, "ioremap failed\n");
++		ret = -ENOMEM;
++		goto err_ioremap;
++	}
++
++	INIT_LIST_HEAD(&pdca->dma.channels);
++	for (i = 0; i < pdata->nr_channels; i++, pdca->dma.chancnt++)
++		pdca_init_channel(pdca, i);
++
++	ret = request_irq(irq, pdca_interrupt, 0, pdev->dev.bus_id, pdca);
++	if (ret) {
++		dev_dbg(&pdev->dev, "request_irq failed\n");
++		goto err_irq;
++	}
++
++	dma_cap_set(DMA_SLAVE, pdca->dma.cap_mask);
++	pdca->dma.dev = &pdev->dev;
++	pdca->dma.device_alloc_chan_resources = pdca_alloc_chan_resources;
++	pdca->dma.device_free_chan_resources = pdca_free_chan_resources;
++	pdca->dma.device_prep_slave_sg = pdca_prep_slave_sg;
++	pdca->dma.device_terminate_all = pdca_terminate_all;
++	pdca->dma.device_is_tx_complete = pdca_is_tx_complete;
++	pdca->dma.device_issue_pending = pdca_issue_pending;
++
++	platform_set_drvdata(pdev, pdca);
++	dma_async_device_register(&pdca->dma);
++
++	dev_info(&pdev->dev, "Atmel PDCA at 0x%08lx (irq %d) %u channels\n",
++			(unsigned long)mmio->start, irq, pdca->dma.chancnt);
++
++	return 0;
++
++err_irq:
++	iounmap(pdca->regs);
++err_ioremap:
++	clk_put(pdca->pclk);
++err_get_pclk:
++	clk_put(pdca->hclk);
++err_get_hclk:
++	kfree(pdca);
++err_alloc_pdca:
++	release_resource(mmio);
++	return ret;
++}
++
++static int __exit pdca_remove(struct platform_device *pdev)
++{
++	struct pdca_dev		*pdca = platform_get_drvdata(pdev);
++	struct pdca_chan	*pch;
++	struct resource		*mmio;
++
++	list_for_each_entry(pch, &pdca->dma.channels, chan.device_node)
++		pdca_suspend_channel(pdca, pch);
++
++	dma_async_device_unregister(&pdca->dma);
++	free_irq(platform_get_irq(pdev, 0), pdca);
++	clk_put(pdca->pclk);
++	clk_put(pdca->hclk);
++	iounmap(pdca->regs);
++	kfree(pdca);
++
++	mmio = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	release_resource(mmio);
++
++	return 0;
++}
++
++static void pdca_shutdown(struct platform_device *pdev)
++{
++	struct pdca_dev		*pdca = platform_get_drvdata(pdev);
++	struct pdca_chan	*pch;
++
++	list_for_each_entry(pch, &pdca->dma.channels, chan.device_node)
++		pdca_suspend_channel(pdca, pch);
++}
++
++static int pdca_suspend_late(struct platform_device *pdev, pm_message_t state)
++{
++	return 0;
++}
++
++static int pdca_resume_early(struct platform_device *pdev)
++{
++	return 0;
++}
++
++static struct platform_driver pdca_driver = {
++	.remove		= __exit_p(pdca_remove),
++	.shutdown	= pdca_shutdown,
++	.suspend_late	= pdca_suspend_late,
++	.resume_early	= pdca_resume_early,
++	.driver		= {
++		.name	= "atmel_pdca",
++	},
++};
++
++static int __init pdca_init(void)
++{
++	return platform_driver_probe(&pdca_driver, pdca_probe);
++}
++subsys_initcall(pdca_init);
++
++static void __exit pdca_exit(void)
++{
++	platform_driver_unregister(&pdca_driver);
++}
++module_exit(pdca_exit);
++
++MODULE_LICENSE("GPL v2");
++MODULE_DESCRIPTION("Atmel PDCA DMA Controller driver");
++MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>");
+diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
+index 0778d99..a7686b9 100644
+--- a/drivers/dma/dw_dmac.c
++++ b/drivers/dma/dw_dmac.c
+@@ -545,109 +545,51 @@ err_desc_get:
+ 	return NULL;
+ }
+ 
+-static struct dma_async_tx_descriptor *
+-dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+-		unsigned int sg_len, enum dma_data_direction direction,
+-		unsigned long flags)
++static struct dw_desc *dwc_init_slave_descs(struct dw_dma_chan *dwc,
++		struct scatterlist *sgl, unsigned int sg_len,
++		u32 ctllo, dma_addr_t src_reg, dma_addr_t dst_reg,
++		unsigned int reg_width, unsigned long flags)
+ {
+-	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
+-	struct dw_dma_slave	*dws = dwc->dws;
+-	struct dw_desc		*prev;
+-	struct dw_desc		*first;
+-	u32			ctllo;
+-	dma_addr_t		reg;
+-	unsigned int		reg_width;
+-	unsigned int		mem_width;
+-	unsigned int		i;
++	struct dma_chan		*chan = &dwc->chan;
+ 	struct scatterlist	*sg;
++	struct dw_desc		*desc;
++	struct dw_desc		*first = NULL;
++	struct dw_desc		*prev = NULL;
++	unsigned int		align_mask;
++	unsigned int		i;
+ 	size_t			total_len = 0;
+ 
+-	dev_vdbg(&chan->dev, "prep_dma_slave\n");
+-
+-	if (unlikely(!dws || !sg_len))
+-		return NULL;
+-
+-	reg_width = dws->slave.reg_width;
+-	prev = first = NULL;
+-
+-	sg_len = dma_map_sg(chan->dev.parent, sgl, sg_len, direction);
++	align_mask = (1 << reg_width) - 1;
++	for_each_sg(sgl, sg, sg_len, i) {
++		u32		len;
++		u32		desc_len;
++		u32		mem;
+ 
+-	switch (direction) {
+-	case DMA_TO_DEVICE:
+-		ctllo = (DWC_DEFAULT_CTLLO
+-				| DWC_CTLL_DST_WIDTH(reg_width)
+-				| DWC_CTLL_DST_FIX
+-				| DWC_CTLL_SRC_INC
+-				| DWC_CTLL_FC_M2P);
+-		reg = dws->slave.tx_reg;
+-		for_each_sg(sgl, sg, sg_len, i) {
+-			struct dw_desc	*desc;
+-			u32		len;
+-			u32		mem;
++		mem = sg_phys(sg);
++		len = sg_dma_len(sg);
++		total_len += len;
+ 
++		while (len) {
++			desc_len = min(len, DWC_MAX_COUNT << reg_width);
+ 			desc = dwc_desc_get(dwc);
+ 			if (!desc) {
+ 				dev_err(&chan->dev,
+ 					"not enough descriptors available\n");
+ 				goto err_desc_get;
+ 			}
++			len -= desc_len;
+ 
+-			mem = sg_phys(sg);
+-			len = sg_dma_len(sg);
+-			mem_width = 2;
+-			if (unlikely(mem & 3 || len & 3))
+-				mem_width = 0;
++			if (unlikely((mem & align_mask) || (len & align_mask)))
++				goto err_align;
+ 
+-			desc->lli.sar = mem;
+-			desc->lli.dar = reg;
+-			desc->lli.ctllo = ctllo | DWC_CTLL_SRC_WIDTH(mem_width);
+-			desc->lli.ctlhi = len >> mem_width;
+-
+-			if (!first) {
+-				first = desc;
+-			} else {
+-				prev->lli.llp = desc->txd.phys;
+-				dma_sync_single_for_device(chan->dev.parent,
+-						prev->txd.phys,
+-						sizeof(prev->lli),
+-						DMA_TO_DEVICE);
+-				list_add_tail(&desc->desc_node,
+-						&first->txd.tx_list);
+-			}
+-			prev = desc;
+-			total_len += len;
+-		}
+-		break;
+-	case DMA_FROM_DEVICE:
+-		ctllo = (DWC_DEFAULT_CTLLO
+-				| DWC_CTLL_SRC_WIDTH(reg_width)
+-				| DWC_CTLL_DST_INC
+-				| DWC_CTLL_SRC_FIX
+-				| DWC_CTLL_FC_P2M);
+-
+-		reg = dws->slave.rx_reg;
+-		for_each_sg(sgl, sg, sg_len, i) {
+-			struct dw_desc	*desc;
+-			u32		len;
+-			u32		mem;
+-
+-			desc = dwc_desc_get(dwc);
+-			if (!desc) {
+-				dev_err(&chan->dev,
+-					"not enough descriptors available\n");
+-				goto err_desc_get;
+-			}
+-
+-			mem = sg_phys(sg);
+-			len = sg_dma_len(sg);
+-			mem_width = 2;
+-			if (unlikely(mem & 3 || len & 3))
+-				mem_width = 0;
+-
+-			desc->lli.sar = reg;
+-			desc->lli.dar = mem;
+-			desc->lli.ctllo = ctllo | DWC_CTLL_DST_WIDTH(mem_width);
+-			desc->lli.ctlhi = len >> reg_width;
++			desc->lli.sar = src_reg ? src_reg : mem;
++			desc->lli.dar = dst_reg ? dst_reg : mem;
++			desc->lli.ctllo = ctllo;
++			desc->lli.ctlhi = desc_len >> reg_width;
++			dev_vdbg(&dwc->chan.dev,
++					"  s%08x d%08x c%08x:%08x\n",
++					desc->lli.sar, desc->lli.dar,
++					ctllo, desc_len >> reg_width);
+ 
+ 			if (!first) {
+ 				first = desc;
+@@ -661,11 +603,8 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+ 						&first->txd.tx_list);
+ 			}
+ 			prev = desc;
+-			total_len += len;
++			mem += desc_len;
+ 		}
+-		break;
+-	default:
+-		return NULL;
+ 	}
+ 
+ 	if (flags & DMA_PREP_INTERRUPT)
+@@ -679,13 +618,69 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+ 
+ 	first->len = total_len;
+ 
+-	return &first->txd;
++	return first;
+ 
++err_align:
++	dwc_desc_put(dwc, desc);
+ err_desc_get:
+ 	dwc_desc_put(dwc, first);
+ 	return NULL;
+ }
+ 
++static struct dma_async_tx_descriptor *
++dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
++		unsigned int sg_len, enum dma_data_direction direction,
++		unsigned long flags)
++{
++	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
++	struct dw_dma_slave	*dws = dwc->dws;
++	struct dw_desc		*first;
++	u32			ctllo;
++	unsigned int		reg_width;
++
++	dev_vdbg(&chan->dev, "prep_dma_slave: %s %u segments, flags: %lx\n",
++			direction == DMA_TO_DEVICE ? "OUT" : "IN",
++			sg_len, flags);
++
++	if (unlikely(!dws || !sg_len))
++		return NULL;
++
++	reg_width = dws->slave.reg_width;
++	sg_len = dma_map_sg(chan->dev.parent, sgl, sg_len, direction);
++
++	switch (direction) {
++	case DMA_TO_DEVICE:
++		ctllo = (DWC_DEFAULT_CTLLO
++				| DWC_CTLL_DST_WIDTH(reg_width)
++				| DWC_CTLL_SRC_WIDTH(reg_width)
++				| DWC_CTLL_DST_FIX
++				| DWC_CTLL_SRC_INC
++				| DWC_CTLL_FC_M2P);
++		first = dwc_init_slave_descs(dwc, sgl, sg_len, ctllo,
++				0, dws->slave.tx_reg, reg_width, flags);
++		break;
++	case DMA_FROM_DEVICE:
++		ctllo = (DWC_DEFAULT_CTLLO
++				| DWC_CTLL_SRC_WIDTH(reg_width)
++				| DWC_CTLL_DST_WIDTH(reg_width)
++				| DWC_CTLL_DST_INC
++				| DWC_CTLL_SRC_FIX
++				| DWC_CTLL_FC_P2M);
++		first = dwc_init_slave_descs(dwc, sgl, sg_len, ctllo,
++				dws->slave.rx_reg, 0, reg_width, flags);
++		break;
++	default:
++		return NULL;
++	}
++
++	if (unlikely(!first)) {
++		dma_unmap_sg(chan->dev.parent, sgl, sg_len, direction);
++		return NULL;
++	}
++
++	return &first->txd;
++}
++
+ static void dwc_terminate_all(struct dma_chan *chan)
+ {
+ 	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
+@@ -1109,7 +1104,7 @@ static int __init dw_init(void)
+ {
+ 	return platform_driver_probe(&dw_driver, dw_probe);
+ }
+-module_init(dw_init);
++subsys_initcall(dw_init);
+ 
+ static void __exit dw_exit(void)
+ {
+diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
+index ea8d7a3..1ce21d4 100644
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -114,6 +114,17 @@ config MMC_ATMELMCI
+ 
+ 	  If unsure, say N.
+ 
++config MMC_ATMELMCI_DMA
++	bool "Atmel MCI DMA support (EXPERIMENTAL)"
++	depends on MMC_ATMELMCI && DMA_ENGINE && EXPERIMENTAL
++	help
++	  Say Y here to have the Atmel MCI driver use a DMA engine to
++	  do data transfers and thus increase the throughput and
++	  reduce the CPU utilization. Note that this is highly
++	  experimental and may cause the driver to lock up.
++
++	  If unsure, say N.
++
+ config MMC_IMX
+ 	tristate "Motorola i.MX Multimedia Card Interface support"
+ 	depends on ARCH_IMX
+diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
+index 26bd80e..cfb7ce1 100644
+--- a/drivers/mmc/host/atmel-mci-regs.h
++++ b/drivers/mmc/host/atmel-mci-regs.h
+@@ -10,13 +10,21 @@
+ #ifndef __DRIVERS_MMC_ATMEL_MCI_H__
+ #define __DRIVERS_MMC_ATMEL_MCI_H__
+ 
+-/* MCI Register Definitions */
++/*
++ * MCI Register Definitions. Registers and bitfields marked with [2]
++ * are only available in MCI2.
++ */
+ #define MCI_CR			0x0000	/* Control */
+ # define MCI_CR_MCIEN		(  1 <<  0)	/* MCI Enable */
+ # define MCI_CR_MCIDIS		(  1 <<  1)	/* MCI Disable */
++# define MCI_CR_PWSEN		(  1 <<  2)	/* Powersave Enable[2] */
++# define MCI_CR_PWSDIS		(  1 <<  3)	/* Powersave Disable[2] */
++# define MCI_CR_IOWAITEN	(  1 <<  4)	/* SDIO Read Wait Enable[2] */
++# define MCI_CR_IOWAITDIS	(  1 <<  5)	/* SDIO Read Wait Disable[2] */
+ # define MCI_CR_SWRST		(  1 <<  7)	/* Software Reset */
+ #define MCI_MR			0x0004	/* Mode */
+ # define MCI_MR_CLKDIV(x)	((x) <<  0)	/* Clock Divider */
++# define MCI_MR_PWSDIV(x)	((x) <<  8)	/* Powersave Divider[2] */
+ # define MCI_MR_RDPROOF		(  1 << 11)	/* Read Proof */
+ # define MCI_MR_WRPROOF		(  1 << 12)	/* Write Proof */
+ #define MCI_DTOR		0x0008	/* Data Timeout */
+@@ -24,9 +32,12 @@
+ # define MCI_DTOMUL(x)		((x) <<  4)	/* Data Timeout Multiplier */
+ #define MCI_SDCR		0x000c	/* SD Card / SDIO */
+ # define MCI_SDCSEL_SLOT_A	(  0 <<  0)	/* Select SD slot A */
+-# define MCI_SDCSEL_SLOT_B	(  1 <<  0)	/* Select SD slot A */
+-# define MCI_SDCBUS_1BIT	(  0 <<  7)	/* 1-bit data bus */
+-# define MCI_SDCBUS_4BIT	(  1 <<  7)	/* 4-bit data bus */
++# define MCI_SDCSEL_SLOT_B	(  1 <<  0)	/* Select SD slot B */
++# define MCI_SDCSEL_MASK	(  3 <<  0)
++# define MCI_SDCBUS_1BIT	(  0 <<  6)	/* 1-bit data bus */
++# define MCI_SDCBUS_4BIT	(  2 <<  6)	/* 4-bit data bus */
++# define MCI_SDCBUS_8BIT	(  3 <<  6)	/* 8-bit data bus[2] */
++# define MCI_SDCBUS_MASK	(  3 <<  6)
+ #define MCI_ARGR		0x0010	/* Command Argument */
+ #define MCI_CMDR		0x0014	/* Command */
+ # define MCI_CMDR_CMDNB(x)	((x) <<  0)	/* Command Opcode */
+@@ -54,6 +65,9 @@
+ #define MCI_BLKR		0x0018	/* Block */
+ # define MCI_BCNT(x)		((x) <<  0)	/* Data Block Count */
+ # define MCI_BLKLEN(x)		((x) << 16)	/* Data Block Length */
++#define MCI_CSTOR		0x001c	/* Completion Signal Timeout[2] */
++# define MCI_CSTOCYC(x)		((x) <<  0)	/* CST cycles */
++# define MCI_CSTOMUL(x)		((x) <<  4)	/* CST multiplier */
+ #define MCI_RSPR		0x0020	/* Response 0 */
+ #define MCI_RSPR1		0x0024	/* Response 1 */
+ #define MCI_RSPR2		0x0028	/* Response 2 */
+@@ -64,24 +78,45 @@
+ #define MCI_IER			0x0044	/* Interrupt Enable */
+ #define MCI_IDR			0x0048	/* Interrupt Disable */
+ #define MCI_IMR			0x004c	/* Interrupt Mask */
+-# define MCI_CMDRDY		(  1 <<   0)	/* Command Ready */
+-# define MCI_RXRDY		(  1 <<   1)	/* Receiver Ready */
+-# define MCI_TXRDY		(  1 <<   2)	/* Transmitter Ready */
+-# define MCI_BLKE		(  1 <<   3)	/* Data Block Ended */
+-# define MCI_DTIP		(  1 <<   4)	/* Data Transfer In Progress */
+-# define MCI_NOTBUSY		(  1 <<   5)	/* Data Not Busy */
+-# define MCI_SDIOIRQA		(  1 <<   8)	/* SDIO IRQ in slot A */
+-# define MCI_SDIOIRQB		(  1 <<   9)	/* SDIO IRQ in slot B */
+-# define MCI_RINDE		(  1 <<  16)	/* Response Index Error */
+-# define MCI_RDIRE		(  1 <<  17)	/* Response Direction Error */
+-# define MCI_RCRCE		(  1 <<  18)	/* Response CRC Error */
+-# define MCI_RENDE		(  1 <<  19)	/* Response End Bit Error */
+-# define MCI_RTOE		(  1 <<  20)	/* Response Time-Out Error */
+-# define MCI_DCRCE		(  1 <<  21)	/* Data CRC Error */
+-# define MCI_DTOE		(  1 <<  22)	/* Data Time-Out Error */
+-# define MCI_OVRE		(  1 <<  30)	/* RX Overrun Error */
+-# define MCI_UNRE		(  1 <<  31)	/* TX Underrun Error */
++# define MCI_CMDRDY		(  1 <<  0)	/* Command Ready */
++# define MCI_RXRDY		(  1 <<  1)	/* Receiver Ready */
++# define MCI_TXRDY		(  1 <<  2)	/* Transmitter Ready */
++# define MCI_BLKE		(  1 <<  3)	/* Data Block Ended */
++# define MCI_DTIP		(  1 <<  4)	/* Data Transfer In Progress */
++# define MCI_NOTBUSY		(  1 <<  5)	/* Data Not Busy */
++# define MCI_SDIOIRQA		(  1 <<  8)	/* SDIO IRQ in slot A */
++# define MCI_SDIOIRQB		(  1 <<  9)	/* SDIO IRQ in slot B */
++# define MCI_RINDE		(  1 << 16)	/* Response Index Error */
++# define MCI_RDIRE		(  1 << 17)	/* Response Direction Error */
++# define MCI_RCRCE		(  1 << 18)	/* Response CRC Error */
++# define MCI_RENDE		(  1 << 19)	/* Response End Bit Error */
++# define MCI_RTOE		(  1 << 20)	/* Response Time-Out Error */
++# define MCI_DCRCE		(  1 << 21)	/* Data CRC Error */
++# define MCI_DTOE		(  1 << 22)	/* Data Time-Out Error */
++# define MCI_OVRE		(  1 << 30)	/* RX Overrun Error */
++# define MCI_UNRE		(  1 << 31)	/* TX Underrun Error */
++#define MCI_DMA			0x0050	/* DMA Configuration[2] */
++# define MCI_DMA_OFFSET(x)	((x) <<  0)	/* DMA write buffer offset */
++# define MCI_DMA_CHKSIZE_1	(  0 <<  5)	/* DMA chunk size */
++# define MCI_DMA_CHKSIZE_4	(  1 <<  5)	/* DMA chunk size */
++# define MCI_DMA_CHKSIZE_8	(  2 <<  5)	/* DMA chunk size */
++# define MCI_DMA_CHKSIZE_16	(  3 <<  5)	/* DMA chunk size */
++# define MCI_DMAEN		(  1 <<  8)	/* DMA HW handshake enable */
++#define MCI_CFG			0x0054	/* Configuration[2] */
++# define MCI_CFG_FIFOMODE	(  1 <<  0)	/* Start transfer ASAP */
++# define MCI_CFG_FERRCTRL	(  1 <<  4)	/* xrun flags clear-on-read */
++# define MCI_CFG_HSMODE		(  1 <<  8)	/* Use high-speed signaling */
++# define MCI_CFG_LSYNC		(  1 << 12)	/* Synchronize on last block */
++#define MCI_WPMR		0x00e4	/* Write Protect Mode[2] */
++# define MCI_WP_EN		(  1 <<  0)	/* WP Enable */
++# define MCI_WP_KEY		(0x4d4349 << 8)	/* WP Key */
++#define MCI_WPSR		0x00e8	/* Write Protect Status[2] */
++# define MCI_GET_WP_VS(x)	((x) & 0x0f)
++# define MCI_GET_WP_VSRC(x)	(((x) >> 8) & 0xffff)
++#define MCI_VERSION		0x00fc	/* MCI Core Version[2] */
++#define MCI_FIFO_APERTURE	0x0200	/* FIFO Aperture[2] */
+ 
++/* This is not including the FIFO Aperture on MCI2 */
+ #define MCI_REGS_SIZE		0x100
+ 
+ /* Register access macros */
+diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
+index 0000896..3480a5a 100644
+--- a/drivers/mmc/host/atmel-mci.c
++++ b/drivers/mmc/host/atmel-mci.c
+@@ -11,6 +11,8 @@
+ #include <linux/clk.h>
+ #include <linux/debugfs.h>
+ #include <linux/device.h>
++#include <linux/dmaengine.h>
++#include <linux/dma-mapping.h>
+ #include <linux/err.h>
+ #include <linux/gpio.h>
+ #include <linux/init.h>
+@@ -29,68 +31,195 @@
+ #include <asm/unaligned.h>
+ 
+ #include <mach/board.h>
++#include <mach/cpu.h>
+ 
+ #include "atmel-mci-regs.h"
+ 
+ #define ATMCI_DATA_ERROR_FLAGS	(MCI_DCRCE | MCI_DTOE | MCI_OVRE | MCI_UNRE)
++#define ATMCI_DMA_THRESHOLD	16
+ 
+ enum {
+ 	EVENT_CMD_COMPLETE = 0,
+-	EVENT_DATA_ERROR,
+-	EVENT_DATA_COMPLETE,
+-	EVENT_STOP_SENT,
+-	EVENT_STOP_COMPLETE,
+ 	EVENT_XFER_COMPLETE,
++	EVENT_DATA_COMPLETE,
++	EVENT_DATA_ERROR,
++};
++
++enum atmel_mci_state {
++	STATE_IDLE = 0,
++	STATE_SENDING_CMD,
++	STATE_SENDING_DATA,
++	STATE_DATA_BUSY,
++	STATE_SENDING_STOP,
++	STATE_DATA_ERROR,
++};
++
++struct atmel_mci_dma {
++#ifdef CONFIG_MMC_ATMELMCI_DMA
++	struct dma_client		client;
++	struct dma_chan			*chan;
++	struct dma_async_tx_descriptor	*data_desc;
++#endif
+ };
+ 
++/**
++ * struct atmel_mci - MMC controller state shared between all slots
++ * @lock: Spinlock protecting the queue and associated data.
++ * @regs: Pointer to MMIO registers.
++ * @sg: Scatterlist entry currently being processed by PIO code, if any.
++ * @pio_offset: Offset into the current scatterlist entry.
++ * @cur_slot: The slot which is currently using the controller.
++ * @mrq: The request currently being processed on @cur_slot,
++ *	or NULL if the controller is idle.
++ * @cmd: The command currently being sent to the card, or NULL.
++ * @data: The data currently being transferred, or NULL if no data
++ *	transfer is in progress.
++ * @dma: DMA client state.
++ * @data_chan: DMA channel being used for the current data transfer.
++ * @cmd_status: Snapshot of SR taken upon completion of the current
++ *	command. Only valid when EVENT_CMD_COMPLETE is pending.
++ * @data_status: Snapshot of SR taken upon completion of the current
++ *	data transfer. Only valid when EVENT_DATA_COMPLETE or
++ *	EVENT_DATA_ERROR is pending.
++ * @stop_cmdr: Value to be loaded into CMDR when the stop command is
++ *	to be sent.
++ * @tasklet: Tasklet running the request state machine.
++ * @pending_events: Bitmask of events flagged by the interrupt handler
++ *	to be processed by the tasklet.
++ * @completed_events: Bitmask of events which the state machine has
++ *	processed.
++ * @state: Tasklet state.
++ * @queue: List of slots waiting for access to the controller.
++ * @need_clock_update: Update the clock rate before the next request.
++ * @need_reset: Reset controller before next request.
++ * @mode_reg: Value of the MR register.
++ * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
++ *	rate and timeout calculations.
++ * @mapbase: Physical address of the MMIO registers.
++ * @mck: The peripheral bus clock hooked up to the MMC controller.
++ * @pdev: Platform device associated with the MMC controller.
++ * @slot: Slots sharing this MMC controller.
++ *
++ * Locking
++ * =======
++ *
++ * @lock is a softirq-safe spinlock protecting @queue as well as
++ * @cur_slot, @mrq and @state. These must always be updated
++ * at the same time while holding @lock.
++ *
++ * @lock also protects mode_reg and need_clock_update since these are
++ * used to synchronize mode register updates with the queue
++ * processing.
++ *
++ * The @mrq field of struct atmel_mci_slot is also protected by @lock,
++ * and must always be written at the same time as the slot is added to
++ * @queue.
++ *
++ * @pending_events and @completed_events are accessed using atomic bit
++ * operations, so they don't need any locking.
++ *
++ * None of the fields touched by the interrupt handler need any
++ * locking. However, ordering is important: Before EVENT_DATA_ERROR or
++ * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
++ * interrupts must be disabled and @data_status updated with a
++ * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
++ * CMDRDY interupt must be disabled and @cmd_status updated with a
++ * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
++ * bytes_xfered field of @data must be written. This is ensured by
++ * using barriers.
++ */
+ struct atmel_mci {
+-	struct mmc_host		*mmc;
++	spinlock_t		lock;
+ 	void __iomem		*regs;
+ 
+ 	struct scatterlist	*sg;
+ 	unsigned int		pio_offset;
+ 
++	struct atmel_mci_slot	*cur_slot;
+ 	struct mmc_request	*mrq;
+ 	struct mmc_command	*cmd;
+ 	struct mmc_data		*data;
+ 
++	struct atmel_mci_dma	dma;
++	struct dma_chan		*data_chan;
++
+ 	u32			cmd_status;
+ 	u32			data_status;
+-	u32			stop_status;
+ 	u32			stop_cmdr;
+ 
+-	u32			mode_reg;
+-	u32			sdc_reg;
+-
+ 	struct tasklet_struct	tasklet;
+ 	unsigned long		pending_events;
+ 	unsigned long		completed_events;
++	enum atmel_mci_state	state;
++	struct list_head	queue;
+ 
+-	int			present;
+-	int			detect_pin;
+-	int			wp_pin;
+-
+-	/* For detect pin debouncing */
+-	struct timer_list	detect_timer;
+-
++	bool			need_clock_update;
++	bool			need_reset;
++	u32			mode_reg;
+ 	unsigned long		bus_hz;
+ 	unsigned long		mapbase;
+ 	struct clk		*mck;
+ 	struct platform_device	*pdev;
++
++	struct atmel_mci_slot	*slot[ATMEL_MCI_MAX_NR_SLOTS];
++};
++
++/**
++ * struct atmel_mci_slot - MMC slot state
++ * @mmc: The mmc_host representing this slot.
++ * @host: The MMC controller this slot is using.
++ * @sdc_reg: Value of SDCR to be written before using this slot.
++ * @mrq: mmc_request currently being processed or waiting to be
++ *	processed, or NULL when the slot is idle.
++ * @queue_node: List node for placing this node in the @queue list of
++ *	&struct atmel_mci.
++ * @clock: Clock rate configured by set_ios(). Protected by host->lock.
++ * @flags: Random state bits associated with the slot.
++ * @detect_pin: GPIO pin used for card detection, or negative if not
++ *	available.
++ * @wp_pin: GPIO pin used for card write protect sending, or negative
++ *	if not available.
++ * @detect_timer: Timer used for debouncing @detect_pin interrupts.
++ */
++struct atmel_mci_slot {
++	struct mmc_host		*mmc;
++	struct atmel_mci	*host;
++
++	u32			sdc_reg;
++
++	struct mmc_request	*mrq;
++	struct list_head	queue_node;
++
++	unsigned int		clock;
++	unsigned long		flags;
++#define ATMCI_CARD_PRESENT	0
++#define ATMCI_CARD_NEED_INIT	1
++#define ATMCI_SHUTDOWN		2
++
++	int			detect_pin;
++	int			wp_pin;
++
++	struct timer_list	detect_timer;
+ };
+ 
+-#define atmci_is_completed(host, event)				\
+-	test_bit(event, &host->completed_events)
+ #define atmci_test_and_clear_pending(host, event)		\
+ 	test_and_clear_bit(event, &host->pending_events)
+-#define atmci_test_and_set_completed(host, event)		\
+-	test_and_set_bit(event, &host->completed_events)
+ #define atmci_set_completed(host, event)			\
+ 	set_bit(event, &host->completed_events)
+ #define atmci_set_pending(host, event)				\
+ 	set_bit(event, &host->pending_events)
+-#define atmci_clear_pending(host, event)			\
+-	clear_bit(event, &host->pending_events)
++
++/*
++ * The new MCI2 module isn't 100% compatible with the old MCI module,
++ * and it has a few nice features which we want to use...
++ */
++static inline bool atmci_is_mci2(void)
++{
++	if (cpu_is_at32ap7200())
++		return true;
++
++	return false;
++}
+ 
+ /*
+  * The debugfs stuff below is mostly optimized away when
+@@ -98,14 +227,15 @@ struct atmel_mci {
+  */
+ static int atmci_req_show(struct seq_file *s, void *v)
+ {
+-	struct atmel_mci	*host = s->private;
+-	struct mmc_request	*mrq = host->mrq;
++	struct atmel_mci_slot	*slot = s->private;
++	struct mmc_request	*mrq;
+ 	struct mmc_command	*cmd;
+ 	struct mmc_command	*stop;
+ 	struct mmc_data		*data;
+ 
+ 	/* Make sure we get a consistent snapshot */
+-	spin_lock_irq(&host->mmc->lock);
++	spin_lock_bh(&slot->host->lock);
++	mrq = slot->mrq;
+ 
+ 	if (mrq) {
+ 		cmd = mrq->cmd;
+@@ -130,7 +260,7 @@ static int atmci_req_show(struct seq_file *s, void *v)
+ 				stop->resp[2], stop->error);
+ 	}
+ 
+-	spin_unlock_irq(&host->mmc->lock);
++	spin_unlock_bh(&slot->host->lock);
+ 
+ 	return 0;
+ }
+@@ -158,8 +288,15 @@ static void atmci_show_status_reg(struct seq_file *s,
+ 		[3]	= "BLKE",
+ 		[4]	= "DTIP",
+ 		[5]	= "NOTBUSY",
++		[6]	= "ENDRX",
++		[7]	= "ENDTX",
+ 		[8]	= "SDIOIRQA",
+ 		[9]	= "SDIOIRQB",
++		[10]	= "SDIOIRQC",
++		[11]	= "SDIOIRQD",
++		[12]	= "SDIOWAIT",
++		[14]	= "RXBUFF",
++		[15]	= "TXBUFE",
+ 		[16]	= "RINDE",
+ 		[17]	= "RDIRE",
+ 		[18]	= "RCRCE",
+@@ -167,6 +304,11 @@ static void atmci_show_status_reg(struct seq_file *s,
+ 		[20]	= "RTOE",
+ 		[21]	= "DCRCE",
+ 		[22]	= "DTOE",
++		[23]	= "CSTOE",
++		[24]	= "BLKOVRE",
++		[25]	= "DMADONE",
++		[26]	= "FIFOEMPTY",
++		[27]	= "XFRDONE",
+ 		[30]	= "OVRE",
+ 		[31]	= "UNRE",
+ 	};
+@@ -193,12 +335,16 @@ static int atmci_regs_show(struct seq_file *s, void *v)
+ 	if (!buf)
+ 		return -ENOMEM;
+ 
+-	/* Grab a more or less consistent snapshot */
+-	spin_lock_irq(&host->mmc->lock);
++	/*
++	 * Grab a more or less consistent snapshot. Note that we're
++	 * not disabling interrupts, so IMR and SR may not be
++	 * consistent.
++	 */
++	spin_lock_bh(&host->lock);
+ 	clk_enable(host->mck);
+ 	memcpy_fromio(buf, host->regs, MCI_REGS_SIZE);
+ 	clk_disable(host->mck);
+-	spin_unlock_irq(&host->mmc->lock);
++	spin_unlock_bh(&host->lock);
+ 
+ 	seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n",
+ 			buf[MCI_MR / 4],
+@@ -236,13 +382,13 @@ static const struct file_operations atmci_regs_fops = {
+ 	.release	= single_release,
+ };
+ 
+-static void atmci_init_debugfs(struct atmel_mci *host)
++static void atmci_init_debugfs(struct atmel_mci_slot *slot)
+ {
+-	struct mmc_host	*mmc;
+-	struct dentry	*root;
+-	struct dentry	*node;
++	struct mmc_host		*mmc = slot->mmc;
++	struct atmel_mci	*host = slot->host;
++	struct dentry		*root;
++	struct dentry		*node;
+ 
+-	mmc = host->mmc;
+ 	root = mmc->debugfs_root;
+ 	if (!root)
+ 		return;
+@@ -254,7 +400,11 @@ static void atmci_init_debugfs(struct atmel_mci *host)
+ 	if (!node)
+ 		goto err;
+ 
+-	node = debugfs_create_file("req", S_IRUSR, root, host, &atmci_req_fops);
++	node = debugfs_create_file("req", S_IRUSR, root, slot, &atmci_req_fops);
++	if (!node)
++		goto err;
++
++	node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state);
+ 	if (!node)
+ 		goto err;
+ 
+@@ -271,25 +421,7 @@ static void atmci_init_debugfs(struct atmel_mci *host)
+ 	return;
+ 
+ err:
+-	dev_err(&host->pdev->dev,
+-		"failed to initialize debugfs for controller\n");
+-}
+-
+-static void atmci_enable(struct atmel_mci *host)
+-{
+-	clk_enable(host->mck);
+-	mci_writel(host, CR, MCI_CR_MCIEN);
+-	mci_writel(host, MR, host->mode_reg);
+-	mci_writel(host, SDCR, host->sdc_reg);
+-}
+-
+-static void atmci_disable(struct atmel_mci *host)
+-{
+-	mci_writel(host, CR, MCI_CR_SWRST);
+-
+-	/* Stall until write is complete, then disable the bus clock */
+-	mci_readl(host, SR);
+-	clk_disable(host->mck);
++	dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n");
+ }
+ 
+ static inline unsigned int ns_to_clocks(struct atmel_mci *host,
+@@ -299,7 +431,7 @@ static inline unsigned int ns_to_clocks(struct atmel_mci *host,
+ }
+ 
+ static void atmci_set_timeout(struct atmel_mci *host,
+-			      struct mmc_data *data)
++		struct atmel_mci_slot *slot, struct mmc_data *data)
+ {
+ 	static unsigned	dtomul_to_shift[] = {
+ 		0, 4, 7, 8, 10, 12, 16, 20
+@@ -322,7 +454,7 @@ static void atmci_set_timeout(struct atmel_mci *host,
+ 		dtocyc = 15;
+ 	}
+ 
+-	dev_vdbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
++	dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n",
+ 			dtocyc << dtomul_to_shift[dtomul]);
+ 	mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc)));
+ }
+@@ -375,15 +507,12 @@ static u32 atmci_prepare_command(struct mmc_host *mmc,
+ }
+ 
+ static void atmci_start_command(struct atmel_mci *host,
+-				struct mmc_command *cmd,
+-				u32 cmd_flags)
++		struct mmc_command *cmd, u32 cmd_flags)
+ {
+-	/* Must read host->cmd after testing event flags */
+-	smp_rmb();
+ 	WARN_ON(host->cmd);
+ 	host->cmd = cmd;
+ 
+-	dev_vdbg(&host->mmc->class_dev,
++	dev_vdbg(&host->pdev->dev,
+ 			"start command: ARGR=0x%08x CMDR=0x%08x\n",
+ 			cmd->arg, cmd_flags);
+ 
+@@ -391,34 +520,172 @@ static void atmci_start_command(struct atmel_mci *host,
+ 	mci_writel(host, CMDR, cmd_flags);
+ }
+ 
+-static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data)
++static void send_stop_cmd(struct atmel_mci *host, struct mmc_data *data)
+ {
+-	struct atmel_mci *host = mmc_priv(mmc);
+-
+ 	atmci_start_command(host, data->stop, host->stop_cmdr);
+ 	mci_writel(host, IER, MCI_CMDRDY);
+ }
+ 
+-static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
++#ifdef CONFIG_MMC_ATMELMCI_DMA
++static void atmci_dma_cleanup(struct atmel_mci *host)
+ {
+-	struct atmel_mci *host = mmc_priv(mmc);
++	struct mmc_data			*data = host->data;
+ 
+-	WARN_ON(host->cmd || host->data);
+-	host->mrq = NULL;
++	dma_unmap_sg(&host->pdev->dev, data->sg, data->sg_len,
++		     ((data->flags & MMC_DATA_WRITE)
++		      ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
++}
++
++static void atmci_stop_dma(struct atmel_mci *host)
++{
++	struct dma_chan *chan = host->data_chan;
++
++	if (chan) {
++		chan->device->device_terminate_all(chan);
++		atmci_dma_cleanup(host);
++	} else {
++		/* Data transfer was stopped by the interrupt handler */
++		atmci_set_pending(host, EVENT_XFER_COMPLETE);
++		mci_writel(host, IER, MCI_NOTBUSY);
++	}
++}
++
++/* This function is called by the DMA driver from tasklet context. */
++static void atmci_dma_complete(void *arg)
++{
++	struct atmel_mci	*host = arg;
++	struct mmc_data		*data = host->data;
++
++	dev_vdbg(&host->pdev->dev, "DMA complete\n");
++
++	atmci_dma_cleanup(host);
++
++	/*
++	 * If the card was removed, data will be NULL. No point trying
++	 * to send the stop command or waiting for NBUSY in this case.
++	 */
++	if (data) {
++		atmci_set_pending(host, EVENT_XFER_COMPLETE);
++		tasklet_schedule(&host->tasklet);
++
++		/*
++		 * Regardless of what the documentation says, we have
++		 * to wait for NOTBUSY even after block read
++		 * operations.
++		 *
++		 * When the DMA transfer is complete, the controller
++		 * may still be reading the CRC from the card, i.e.
++		 * the data transfer is still in progress and we
++		 * haven't seen all the potential error bits yet.
++		 *
++		 * The interrupt handler will schedule a different
++		 * tasklet to finish things up when the data transfer
++		 * is completely done.
++		 *
++		 * We may not complete the mmc request here anyway
++		 * because the mmc layer may call back and cause us to
++		 * violate the "don't submit new operations from the
++		 * completion callback" rule of the dma engine
++		 * framework.
++		 */
++		mci_writel(host, IER, MCI_NOTBUSY);
++	}
++}
++
++static int
++atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
++{
++	struct dma_chan			*chan;
++	struct dma_async_tx_descriptor	*desc;
++	struct scatterlist		*sg;
++	unsigned int			i;
++	enum dma_data_direction		direction;
++
++	/*
++	 * We don't do DMA on "complex" transfers, i.e. with
++	 * non-word-aligned buffers or lengths. Also, we don't bother
++	 * with all the DMA setup overhead for short transfers.
++	 */
++	if (data->blocks * data->blksz < ATMCI_DMA_THRESHOLD)
++		return -EINVAL;
++	if (data->blksz & 3)
++		return -EINVAL;
++
++	for_each_sg(data->sg, sg, data->sg_len, i) {
++		if (sg->offset & 3 || sg->length & 3)
++			return -EINVAL;
++	}
++
++	/* If we don't have a channel, we can't do DMA */
++	chan = host->dma.chan;
++	if (chan) {
++		dma_chan_get(chan);
++		host->data_chan = chan;
++	}
++
++	if (!chan)
++		return -ENODEV;
++
++	if (atmci_is_mci2())
++		mci_writel(host, DMA, MCI_DMAEN);
++
++	if (data->flags & MMC_DATA_READ)
++		direction = DMA_FROM_DEVICE;
++	else
++		direction = DMA_TO_DEVICE;
++
++	desc = chan->device->device_prep_slave_sg(chan,
++			data->sg, data->sg_len, direction,
++			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
++	if (!desc)
++		return -ENOMEM;
++
++	host->dma.data_desc = desc;
++	desc->callback = atmci_dma_complete;
++	desc->callback_param = host;
++
++	return 0;
++}
++
++static void atmci_submit_data(struct atmel_mci *host)
++{
++	struct dma_chan			*chan = host->data_chan;
++	struct dma_async_tx_descriptor	*desc = host->dma.data_desc;
++
++	if (chan) {
++		desc->tx_submit(desc);
++		chan->device->device_issue_pending(chan);
++	}
++}
+ 
+-	atmci_disable(host);
++#else /* CONFIG_MMC_ATMELMCI_DMA */
+ 
+-	mmc_request_done(mmc, mrq);
++static int atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
++{
++	return -ENOSYS;
+ }
+ 
++static void atmci_submit_data(struct atmel_mci *host)
++{
++
++}
++
++static void atmci_stop_dma(struct atmel_mci *host)
++{
++	/* Data transfer was stopped by the interrupt handler */
++	atmci_set_pending(host, EVENT_XFER_COMPLETE);
++	mci_writel(host, IER, MCI_NOTBUSY);
++}
++
++#endif /* CONFIG_MMC_ATMELMCI_DMA */
++
+ /*
+  * Returns a mask of interrupt flags to be enabled after the whole
+  * request has been prepared.
+  */
+-static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data)
++static u32 atmci_prepare_data(struct atmel_mci *host, struct mmc_data *data)
+ {
+-	struct atmel_mci	*host = mmc_priv(mmc);
+-	u32			iflags;
++	u32 iflags;
+ 
+ 	data->error = -EINPROGRESS;
+ 
+@@ -426,77 +693,95 @@ static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data)
+ 	host->sg = NULL;
+ 	host->data = data;
+ 
+-	dev_vdbg(&mmc->class_dev, "BLKR=0x%08x\n",
+-			MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz));
+-
+ 	iflags = ATMCI_DATA_ERROR_FLAGS;
+-	host->sg = data->sg;
+-	host->pio_offset = 0;
+-	if (data->flags & MMC_DATA_READ)
+-		iflags |= MCI_RXRDY;
+-	else
+-		iflags |= MCI_TXRDY;
++	if (atmci_prepare_data_dma(host, data)) {
++		if (atmci_is_mci2())
++			mci_writel(host, DMA, 0);
++		host->data_chan = NULL;
++
++		/*
++		 * Errata: MMC data write operation with less than 12
++		 * bytes is impossible.
++		 *
++		 * Errata: MCI Transmit Data Register (TDR) FIFO
++		 * corruption when length is not multiple of 4.
++		 */
++		if (data->blocks * data->blksz < 12
++				|| (data->blocks * data->blksz) & 3)
++			host->need_reset = true;
++
++		host->sg = data->sg;
++		host->pio_offset = 0;
++		if (data->flags & MMC_DATA_READ)
++			iflags |= MCI_RXRDY;
++		else
++			iflags |= MCI_TXRDY;
++	}
+ 
+ 	return iflags;
+ }
+ 
+-static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
++static void atmci_start_request(struct atmel_mci *host,
++		struct atmel_mci_slot *slot)
+ {
+-	struct atmel_mci	*host = mmc_priv(mmc);
+-	struct mmc_data		*data;
++	struct mmc_request	*mrq;
+ 	struct mmc_command	*cmd;
++	struct mmc_data		*data;
+ 	u32			iflags;
+-	u32			cmdflags = 0;
++	u32			cmdflags;
+ 
+-	iflags = mci_readl(host, IMR);
+-	if (iflags)
+-		dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
+-				mci_readl(host, IMR));
++	mrq = slot->mrq;
++	host->cur_slot = slot;
++	host->mrq = mrq;
+ 
+-	WARN_ON(host->mrq != NULL);
++	host->pending_events = 0;
++	host->completed_events = 0;
++	host->data_status = 0;
+ 
+-	/*
+-	 * We may "know" the card is gone even though there's still an
+-	 * electrical connection. If so, we really need to communicate
+-	 * this to the MMC core since there won't be any more
+-	 * interrupts as the card is completely removed. Otherwise,
+-	 * the MMC core might believe the card is still there even
+-	 * though the card was just removed very slowly.
+-	 */
+-	if (!host->present) {
+-		mrq->cmd->error = -ENOMEDIUM;
+-		mmc_request_done(mmc, mrq);
+-		return;
++	if (host->need_reset) {
++		mci_writel(host, CR, MCI_CR_SWRST);
++		mci_writel(host, CR, MCI_CR_MCIEN);
++		mci_writel(host, MR, host->mode_reg);
++		host->need_reset = false;
+ 	}
++	mci_writel(host, SDCR, slot->sdc_reg);
+ 
+-	host->mrq = mrq;
+-	host->pending_events = 0;
+-	host->completed_events = 0;
++	iflags = mci_readl(host, IMR);
++	if (iflags)
++		dev_warn(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n",
++				iflags);
+ 
+-	atmci_enable(host);
++	if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) {
++		/* Send init sequence (74 clock cycles) */
++		mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT);
++		while (!(mci_readl(host, SR) & MCI_CMDRDY))
++			cpu_relax();
++	}
+ 
+-	/* We don't support multiple blocks of weird lengths. */
++	iflags = 0;
+ 	data = mrq->data;
+ 	if (data) {
+-		if (data->blocks > 1 && data->blksz & 3)
+-			goto fail;
+-		atmci_set_timeout(host, data);
++		atmci_set_timeout(host, slot, data);
+ 
+ 		/* Must set block count/size before sending command */
+ 		mci_writel(host, BLKR, MCI_BCNT(data->blocks)
+ 				| MCI_BLKLEN(data->blksz));
++		dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n",
++			MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz));
++
++		iflags |= atmci_prepare_data(host, data);
+ 	}
+ 
+-	iflags = MCI_CMDRDY;
++	iflags |= MCI_CMDRDY;
+ 	cmd = mrq->cmd;
+-	cmdflags = atmci_prepare_command(mmc, cmd);
++	cmdflags = atmci_prepare_command(slot->mmc, cmd);
+ 	atmci_start_command(host, cmd, cmdflags);
+ 
+ 	if (data)
+-		iflags |= atmci_submit_data(mmc, data);
++		atmci_submit_data(host);
+ 
+ 	if (mrq->stop) {
+-		host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
++		host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop);
+ 		host->stop_cmdr |= MCI_CMDR_STOP_XFER;
+ 		if (!(data->flags & MMC_DATA_WRITE))
+ 			host->stop_cmdr |= MCI_CMDR_TRDIR_READ;
+@@ -513,59 +798,156 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+ 	 * prepared yet.)
+ 	 */
+ 	mci_writel(host, IER, iflags);
++}
+ 
+-	return;
++static void atmci_queue_request(struct atmel_mci *host,
++		struct atmel_mci_slot *slot, struct mmc_request *mrq)
++{
++	dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n",
++			host->state);
++
++	spin_lock_bh(&host->lock);
++	slot->mrq = mrq;
++	if (host->state == STATE_IDLE) {
++		host->state = STATE_SENDING_CMD;
++		atmci_start_request(host, slot);
++	} else {
++		list_add_tail(&slot->queue_node, &host->queue);
++	}
++	spin_unlock_bh(&host->lock);
++}
+ 
+-fail:
+-	atmci_disable(host);
+-	host->mrq = NULL;
+-	mrq->cmd->error = -EINVAL;
+-	mmc_request_done(mmc, mrq);
++static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++	struct atmel_mci_slot	*slot = mmc_priv(mmc);
++	struct atmel_mci	*host = slot->host;
++	struct mmc_data		*data;
++
++	WARN_ON(slot->mrq);
++
++	/*
++	 * We may "know" the card is gone even though there's still an
++	 * electrical connection. If so, we really need to communicate
++	 * this to the MMC core since there won't be any more
++	 * interrupts as the card is completely removed. Otherwise,
++	 * the MMC core might believe the card is still there even
++	 * though the card was just removed very slowly.
++	 */
++	if (!test_bit(ATMCI_CARD_PRESENT, &slot->flags)) {
++		mrq->cmd->error = -ENOMEDIUM;
++		mmc_request_done(mmc, mrq);
++		return;
++	}
++
++	/* We don't support multiple blocks of weird lengths. */
++	data = mrq->data;
++	if (data && data->blocks > 1 && data->blksz & 3) {
++		mrq->cmd->error = -EINVAL;
++		mmc_request_done(mmc, mrq);
++	}
++
++	atmci_queue_request(host, slot, mrq);
+ }
+ 
+ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+ {
+-	struct atmel_mci	*host = mmc_priv(mmc);
++	struct atmel_mci_slot	*slot = mmc_priv(mmc);
++	struct atmel_mci	*host = slot->host;
++	unsigned int		i;
++
++	slot->sdc_reg &= ~MCI_SDCBUS_MASK;
++	switch (ios->bus_width) {
++	case MMC_BUS_WIDTH_1:
++		slot->sdc_reg |= MCI_SDCBUS_1BIT;
++		break;
++	case MMC_BUS_WIDTH_4:
++		slot->sdc_reg |= MCI_SDCBUS_4BIT;
++		break;
++	}
+ 
+ 	if (ios->clock) {
++		unsigned int clock_min = ~0U;
+ 		u32 clkdiv;
+ 
+-		/* Set clock rate */
+-		clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * ios->clock) - 1;
++		spin_lock_bh(&host->lock);
++		if (!host->mode_reg) {
++			clk_enable(host->mck);
++			mci_writel(host, CR, MCI_CR_SWRST);
++			mci_writel(host, CR, MCI_CR_MCIEN);
++		}
++
++		/*
++		 * Use mirror of ios->clock to prevent race with mmc
++		 * core ios update when finding the minimum.
++		 */
++		slot->clock = ios->clock;
++		for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
++			if (host->slot[i] && host->slot[i]->clock
++					&& host->slot[i]->clock < clock_min)
++				clock_min = host->slot[i]->clock;
++		}
++
++		/* Calculate clock divider */
++		clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1;
+ 		if (clkdiv > 255) {
+ 			dev_warn(&mmc->class_dev,
+ 				"clock %u too slow; using %lu\n",
+-				ios->clock, host->bus_hz / (2 * 256));
++				clock_min, host->bus_hz / (2 * 256));
+ 			clkdiv = 255;
+ 		}
+ 
++		/*
++		 * WRPROOF and RDPROOF prevent overruns/underruns by
++		 * stopping the clock when the FIFO is full/empty.
++		 * This state is not expected to last for long.
++		 */
+ 		host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF
+ 					| MCI_MR_RDPROOF;
+-	}
+ 
+-	switch (ios->bus_width) {
+-	case MMC_BUS_WIDTH_1:
+-		host->sdc_reg = 0;
+-		break;
+-	case MMC_BUS_WIDTH_4:
+-		host->sdc_reg = MCI_SDCBUS_4BIT;
+-		break;
++		if (list_empty(&host->queue))
++			mci_writel(host, MR, host->mode_reg);
++		else
++			host->need_clock_update = true;
++
++		spin_unlock_bh(&host->lock);
++	} else {
++		bool any_slot_active = false;
++
++		spin_lock_bh(&host->lock);
++		slot->clock = 0;
++		for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
++			if (host->slot[i] && host->slot[i]->clock) {
++				any_slot_active = true;
++				break;
++			}
++		}
++		if (!any_slot_active) {
++			mci_writel(host, CR, MCI_CR_MCIDIS);
++			if (host->mode_reg) {
++				mci_readl(host, MR);
++				clk_disable(host->mck);
++			}
++			host->mode_reg = 0;
++		}
++		spin_unlock_bh(&host->lock);
+ 	}
+ 
+ 	switch (ios->power_mode) {
+-	case MMC_POWER_ON:
+-		/* Send init sequence (74 clock cycles) */
+-		atmci_enable(host);
+-		mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT);
+-		while (!(mci_readl(host, SR) & MCI_CMDRDY))
+-			cpu_relax();
+-		atmci_disable(host);
++	case MMC_POWER_UP:
++		set_bit(ATMCI_CARD_NEED_INIT, &slot->flags);
+ 		break;
+ 	default:
+ 		/*
+ 		 * TODO: None of the currently available AVR32-based
+ 		 * boards allow MMC power to be turned off. Implement
+ 		 * power control when this can be tested properly.
++		 *
++		 * We also need to hook this into the clock management
++		 * somehow so that newly inserted cards aren't
++		 * subjected to a fast clock before we have a chance
++		 * to figure out what the maximum rate is. Currently,
++		 * there's no way to avoid this, and there never will
++		 * be for boards that don't support power control.
+ 		 */
+ 		break;
+ 	}
+@@ -573,31 +955,82 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+ 
+ static int atmci_get_ro(struct mmc_host *mmc)
+ {
+-	int			read_only = 0;
+-	struct atmel_mci	*host = mmc_priv(mmc);
++	int			read_only = -ENOSYS;
++	struct atmel_mci_slot	*slot = mmc_priv(mmc);
+ 
+-	if (gpio_is_valid(host->wp_pin)) {
+-		read_only = gpio_get_value(host->wp_pin);
++	if (gpio_is_valid(slot->wp_pin)) {
++		read_only = gpio_get_value(slot->wp_pin);
+ 		dev_dbg(&mmc->class_dev, "card is %s\n",
+ 				read_only ? "read-only" : "read-write");
+-	} else {
+-		dev_dbg(&mmc->class_dev,
+-			"no pin for checking read-only switch."
+-			" Assuming write-enable.\n");
+ 	}
+ 
+ 	return read_only;
+ }
+ 
+-static struct mmc_host_ops atmci_ops = {
++static int atmci_get_cd(struct mmc_host *mmc)
++{
++	int			present = -ENOSYS;
++	struct atmel_mci_slot	*slot = mmc_priv(mmc);
++
++	if (gpio_is_valid(slot->detect_pin)) {
++		present = !gpio_get_value(slot->detect_pin);
++		dev_dbg(&mmc->class_dev, "card is %spresent\n",
++				present ? "" : "not ");
++	}
++
++	return present;
++}
++
++static const struct mmc_host_ops atmci_ops = {
+ 	.request	= atmci_request,
+ 	.set_ios	= atmci_set_ios,
+ 	.get_ro		= atmci_get_ro,
++	.get_cd		= atmci_get_cd,
+ };
+ 
++/* Called with host->lock held */
++static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq)
++	__releases(&host->lock)
++	__acquires(&host->lock)
++{
++	struct atmel_mci_slot	*slot = NULL;
++	struct mmc_host		*prev_mmc = host->cur_slot->mmc;
++
++	WARN_ON(host->cmd || host->data);
++
++	/*
++	 * Update the MMC clock rate if necessary. This may be
++	 * necessary if set_ios() is called when a different slot is
++	 * busy transfering data.
++	 */
++	if (host->need_clock_update)
++		mci_writel(host, MR, host->mode_reg);
++
++	host->cur_slot->mrq = NULL;
++	host->mrq = NULL;
++	if (!list_empty(&host->queue)) {
++		slot = list_entry(host->queue.next,
++				struct atmel_mci_slot, queue_node);
++		list_del(&slot->queue_node);
++		dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n",
++				mmc_hostname(slot->mmc));
++		host->state = STATE_SENDING_CMD;
++		atmci_start_request(host, slot);
++	} else {
++		dev_vdbg(&host->pdev->dev, "list empty\n");
++		host->state = STATE_IDLE;
++	}
++
++	spin_unlock(&host->lock);
++	mmc_request_done(prev_mmc, mrq);
++	spin_lock(&host->lock);
++}
++
+ static void atmci_command_complete(struct atmel_mci *host,
+-			struct mmc_command *cmd, u32 status)
++			struct mmc_command *cmd)
+ {
++	u32		status = host->cmd_status;
++
+ 	/* Read the response from the card (up to 16 bytes) */
+ 	cmd->resp[0] = mci_readl(host, RSPR);
+ 	cmd->resp[1] = mci_readl(host, RSPR);
+@@ -614,11 +1047,12 @@ static void atmci_command_complete(struct atmel_mci *host,
+ 		cmd->error = 0;
+ 
+ 	if (cmd->error) {
+-		dev_dbg(&host->mmc->class_dev,
++		dev_dbg(&host->pdev->dev,
+ 			"command error: status=0x%08x\n", status);
+ 
+ 		if (cmd->data) {
+ 			host->data = NULL;
++			atmci_stop_dma(host);
+ 			mci_writel(host, IDR, MCI_NOTBUSY
+ 					| MCI_TXRDY | MCI_RXRDY
+ 					| ATMCI_DATA_ERROR_FLAGS);
+@@ -628,146 +1062,222 @@ static void atmci_command_complete(struct atmel_mci *host,
+ 
+ static void atmci_detect_change(unsigned long data)
+ {
+-	struct atmel_mci *host = (struct atmel_mci *)data;
+-	struct mmc_request *mrq = host->mrq;
+-	int present;
++	struct atmel_mci_slot	*slot = (struct atmel_mci_slot *)data;
++	bool			present;
++	bool			present_old;
+ 
+ 	/*
+-	 * atmci_remove() sets detect_pin to -1 before freeing the
+-	 * interrupt. We must not re-enable the interrupt if it has
+-	 * been freed.
++	 * atmci_cleanup_slot() sets the ATMCI_SHUTDOWN flag before
++	 * freeing the interrupt. We must not re-enable the interrupt
++	 * if it has been freed, and if we're shutting down, it
++	 * doesn't really matter whether the card is present or not.
+ 	 */
+ 	smp_rmb();
+-	if (!gpio_is_valid(host->detect_pin))
++	if (test_bit(ATMCI_SHUTDOWN, &slot->flags))
+ 		return;
+ 
+-	enable_irq(gpio_to_irq(host->detect_pin));
+-	present = !gpio_get_value(host->detect_pin);
++	enable_irq(gpio_to_irq(slot->detect_pin));
++	present = !gpio_get_value(slot->detect_pin);
++	present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags);
++
++	dev_vdbg(&slot->mmc->class_dev, "detect change: %d (was %d)\n",
++			present, present_old);
+ 
+-	dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n",
+-			present, host->present);
++	if (present != present_old) {
++		struct atmel_mci	*host = slot->host;
++		struct mmc_request	*mrq;
+ 
+-	if (present != host->present) {
+-		dev_dbg(&host->mmc->class_dev, "card %s\n",
++		dev_dbg(&slot->mmc->class_dev, "card %s\n",
+ 			present ? "inserted" : "removed");
+-		host->present = present;
+ 
+-		/* Reset controller if card is gone */
+-		if (!present) {
+-			mci_writel(host, CR, MCI_CR_SWRST);
+-			mci_writel(host, IDR, ~0UL);
+-			mci_writel(host, CR, MCI_CR_MCIEN);
+-		}
++		spin_lock(&host->lock);
++
++		if (!present)
++			clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
++		else
++			set_bit(ATMCI_CARD_PRESENT, &slot->flags);
+ 
+ 		/* Clean up queue if present */
++		mrq = slot->mrq;
+ 		if (mrq) {
+-			/*
+-			 * Reset controller to terminate any ongoing
+-			 * commands or data transfers.
+-			 */
+-			mci_writel(host, CR, MCI_CR_SWRST);
++			if (mrq == host->mrq) {
++				/*
++				 * Reset controller to terminate any ongoing
++				 * commands or data transfers.
++				 */
++				mci_writel(host, CR, MCI_CR_SWRST);
++				mci_writel(host, CR, MCI_CR_MCIEN);
++				mci_writel(host, MR, host->mode_reg);
+ 
+-			if (!atmci_is_completed(host, EVENT_CMD_COMPLETE))
+-				mrq->cmd->error = -ENOMEDIUM;
+-
+-			if (mrq->data && !atmci_is_completed(host,
+-						EVENT_DATA_COMPLETE)) {
+ 				host->data = NULL;
+-				mrq->data->error = -ENOMEDIUM;
++				host->cmd = NULL;
++
++				switch (host->state) {
++				case STATE_IDLE:
++					break;
++				case STATE_SENDING_CMD:
++					mrq->cmd->error = -ENOMEDIUM;
++					if (!mrq->data)
++						break;
++					/* fall through */
++				case STATE_SENDING_DATA:
++					mrq->data->error = -ENOMEDIUM;
++					atmci_stop_dma(host);
++					break;
++				case STATE_DATA_BUSY:
++				case STATE_DATA_ERROR:
++					if (mrq->data->error == -EINPROGRESS)
++						mrq->data->error = -ENOMEDIUM;
++					if (!mrq->stop)
++						break;
++					/* fall through */
++				case STATE_SENDING_STOP:
++					mrq->stop->error = -ENOMEDIUM;
++					break;
++				}
++
++				atmci_request_end(host, mrq);
++			} else {
++				list_del(&slot->queue_node);
++				mrq->cmd->error = -ENOMEDIUM;
++				if (mrq->data)
++					mrq->data->error = -ENOMEDIUM;
++				if (mrq->stop)
++					mrq->stop->error = -ENOMEDIUM;
++
++				spin_unlock(&host->lock);
++				mmc_request_done(slot->mmc, mrq);
++				spin_lock(&host->lock);
+ 			}
+-			if (mrq->stop && !atmci_is_completed(host,
+-						EVENT_STOP_COMPLETE))
+-				mrq->stop->error = -ENOMEDIUM;
+-
+-			host->cmd = NULL;
+-			atmci_request_end(host->mmc, mrq);
+ 		}
++		spin_unlock(&host->lock);
+ 
+-		mmc_detect_change(host->mmc, 0);
++		mmc_detect_change(slot->mmc, 0);
+ 	}
+ }
+ 
+ static void atmci_tasklet_func(unsigned long priv)
+ {
+-	struct mmc_host		*mmc = (struct mmc_host *)priv;
+-	struct atmel_mci	*host = mmc_priv(mmc);
++	struct atmel_mci	*host = (struct atmel_mci *)priv;
+ 	struct mmc_request	*mrq = host->mrq;
+ 	struct mmc_data		*data = host->data;
++	struct mmc_command	*cmd = host->cmd;
++	enum atmel_mci_state	state = host->state;
++	enum atmel_mci_state	prev_state;
++	u32			status;
++
++	spin_lock(&host->lock);
+ 
+-	dev_vdbg(&mmc->class_dev,
+-		"tasklet: pending/completed/mask %lx/%lx/%x\n",
+-		host->pending_events, host->completed_events,
++	state = host->state;
++
++	dev_vdbg(&host->pdev->dev,
++		"tasklet: state %u pending/completed/mask %lx/%lx/%x\n",
++		state, host->pending_events, host->completed_events,
+ 		mci_readl(host, IMR));
+ 
+-	if (atmci_test_and_clear_pending(host, EVENT_CMD_COMPLETE)) {
+-		/*
+-		 * host->cmd must be set to NULL before the interrupt
+-		 * handler sees EVENT_CMD_COMPLETE
+-		 */
+-		host->cmd = NULL;
+-		smp_wmb();
+-		atmci_set_completed(host, EVENT_CMD_COMPLETE);
+-		atmci_command_complete(host, mrq->cmd, host->cmd_status);
+-
+-		if (!mrq->cmd->error && mrq->stop
+-				&& atmci_is_completed(host, EVENT_XFER_COMPLETE)
+-				&& !atmci_test_and_set_completed(host,
+-					EVENT_STOP_SENT))
+-			send_stop_cmd(host->mmc, mrq->data);
+-	}
+-	if (atmci_test_and_clear_pending(host, EVENT_STOP_COMPLETE)) {
+-		/*
+-		 * host->cmd must be set to NULL before the interrupt
+-		 * handler sees EVENT_STOP_COMPLETE
+-		 */
+-		host->cmd = NULL;
+-		smp_wmb();
+-		atmci_set_completed(host, EVENT_STOP_COMPLETE);
+-		atmci_command_complete(host, mrq->stop, host->stop_status);
+-	}
+-	if (atmci_test_and_clear_pending(host, EVENT_DATA_ERROR)) {
+-		u32 status = host->data_status;
++	do {
++		prev_state = state;
+ 
+-		dev_vdbg(&mmc->class_dev, "data error: status=%08x\n", status);
++		switch (state) {
++		case STATE_IDLE:
++			break;
+ 
+-		atmci_set_completed(host, EVENT_DATA_ERROR);
+-		atmci_set_completed(host, EVENT_DATA_COMPLETE);
++		case STATE_SENDING_CMD:
++			if (!atmci_test_and_clear_pending(host,
++						EVENT_CMD_COMPLETE))
++				break;
+ 
+-		if (status & MCI_DTOE) {
+-			dev_dbg(&mmc->class_dev,
+-					"data timeout error\n");
+-			data->error = -ETIMEDOUT;
+-		} else if (status & MCI_DCRCE) {
+-			dev_dbg(&mmc->class_dev, "data CRC error\n");
+-			data->error = -EILSEQ;
+-		} else {
+-			dev_dbg(&mmc->class_dev,
+-					"data FIFO error (status=%08x)\n",
+-					status);
+-			data->error = -EIO;
+-		}
++			host->cmd = NULL;
++			atmci_set_completed(host, EVENT_CMD_COMPLETE);
++			atmci_command_complete(host, mrq->cmd);
++			if (!mrq->data || cmd->error) {
++				atmci_request_end(host, host->mrq);
++				goto unlock;
++			}
++
++			prev_state = state = STATE_SENDING_DATA;
++			/* fall through */
++
++		case STATE_SENDING_DATA:
++			if (atmci_test_and_clear_pending(host,
++						EVENT_DATA_ERROR)) {
++				atmci_stop_dma(host);
++				if (data->stop)
++					send_stop_cmd(host, data);
++				state = STATE_DATA_ERROR;
++				break;
++			}
+ 
+-		if (host->present && data->stop
+-				&& atmci_is_completed(host, EVENT_CMD_COMPLETE)
+-				&& !atmci_test_and_set_completed(
+-					host, EVENT_STOP_SENT))
+-			send_stop_cmd(host->mmc, data);
++			if (!atmci_test_and_clear_pending(host,
++						EVENT_XFER_COMPLETE))
++				break;
+ 
+-		host->data = NULL;
+-	}
+-	if (atmci_test_and_clear_pending(host, EVENT_DATA_COMPLETE)) {
+-		atmci_set_completed(host, EVENT_DATA_COMPLETE);
++			atmci_set_completed(host, EVENT_XFER_COMPLETE);
++			prev_state = state = STATE_DATA_BUSY;
++			/* fall through */
++
++		case STATE_DATA_BUSY:
++			if (!atmci_test_and_clear_pending(host,
++						EVENT_DATA_COMPLETE))
++				break;
++
++			host->data = NULL;
++			atmci_set_completed(host, EVENT_DATA_COMPLETE);
++			status = host->data_status;
++			if (unlikely(status & ATMCI_DATA_ERROR_FLAGS)) {
++				if (status & MCI_DTOE) {
++					dev_dbg(&host->pdev->dev,
++							"data timeout error\n");
++					data->error = -ETIMEDOUT;
++				} else if (status & MCI_DCRCE) {
++					dev_dbg(&host->pdev->dev,
++							"data CRC error\n");
++					data->error = -EILSEQ;
++				} else {
++					dev_dbg(&host->pdev->dev,
++						"data FIFO error (status=%08x)\n",
++						status);
++					data->error = -EIO;
++				}
++			} else {
++				data->bytes_xfered = data->blocks * data->blksz;
++				data->error = 0;
++			}
++
++			if (!data->stop) {
++				atmci_request_end(host, host->mrq);
++				goto unlock;
++			}
++
++			prev_state = state = STATE_SENDING_STOP;
++			if (!data->error)
++				send_stop_cmd(host, data);
++			/* fall through */
++
++		case STATE_SENDING_STOP:
++			if (!atmci_test_and_clear_pending(host,
++						EVENT_CMD_COMPLETE))
++				break;
++
++			host->cmd = NULL;
++			atmci_command_complete(host, mrq->stop);
++			atmci_request_end(host, host->mrq);
++			goto unlock;
++
++		case STATE_DATA_ERROR:
++			if (!atmci_test_and_clear_pending(host,
++						EVENT_XFER_COMPLETE))
++				break;
+ 
+-		if (!atmci_is_completed(host, EVENT_DATA_ERROR)) {
+-			data->bytes_xfered = data->blocks * data->blksz;
+-			data->error = 0;
++			state = STATE_DATA_BUSY;
++			break;
+ 		}
++	} while (state != prev_state);
+ 
+-		host->data = NULL;
+-	}
++	host->state = state;
+ 
+-	if (host->mrq && !host->cmd && !host->data)
+-		atmci_request_end(mmc, host->mrq);
++unlock:
++	spin_unlock(&host->lock);
+ }
+ 
+ static void atmci_read_data_pio(struct atmel_mci *host)
+@@ -789,6 +1299,7 @@ static void atmci_read_data_pio(struct atmel_mci *host)
+ 			nbytes += 4;
+ 
+ 			if (offset == sg->length) {
++				flush_dcache_page(sg_page(sg));
+ 				host->sg = sg = sg_next(sg);
+ 				if (!sg)
+ 					goto done;
+@@ -817,9 +1328,11 @@ static void atmci_read_data_pio(struct atmel_mci *host)
+ 			mci_writel(host, IDR, (MCI_NOTBUSY | MCI_RXRDY
+ 						| ATMCI_DATA_ERROR_FLAGS));
+ 			host->data_status = status;
++			data->bytes_xfered += nbytes;
++			smp_wmb();
+ 			atmci_set_pending(host, EVENT_DATA_ERROR);
+ 			tasklet_schedule(&host->tasklet);
+-			break;
++			return;
+ 		}
+ 	} while (status & MCI_RXRDY);
+ 
+@@ -832,10 +1345,8 @@ done:
+ 	mci_writel(host, IDR, MCI_RXRDY);
+ 	mci_writel(host, IER, MCI_NOTBUSY);
+ 	data->bytes_xfered += nbytes;
+-	atmci_set_completed(host, EVENT_XFER_COMPLETE);
+-	if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE)
+-			&& !atmci_test_and_set_completed(host, EVENT_STOP_SENT))
+-		send_stop_cmd(host->mmc, data);
++	smp_wmb();
++	atmci_set_pending(host, EVENT_XFER_COMPLETE);
+ }
+ 
+ static void atmci_write_data_pio(struct atmel_mci *host)
+@@ -888,9 +1399,11 @@ static void atmci_write_data_pio(struct atmel_mci *host)
+ 			mci_writel(host, IDR, (MCI_NOTBUSY | MCI_TXRDY
+ 						| ATMCI_DATA_ERROR_FLAGS));
+ 			host->data_status = status;
++			data->bytes_xfered += nbytes;
++			smp_wmb();
+ 			atmci_set_pending(host, EVENT_DATA_ERROR);
+ 			tasklet_schedule(&host->tasklet);
+-			break;
++			return;
+ 		}
+ 	} while (status & MCI_TXRDY);
+ 
+@@ -903,38 +1416,26 @@ done:
+ 	mci_writel(host, IDR, MCI_TXRDY);
+ 	mci_writel(host, IER, MCI_NOTBUSY);
+ 	data->bytes_xfered += nbytes;
+-	atmci_set_completed(host, EVENT_XFER_COMPLETE);
+-	if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE)
+-			&& !atmci_test_and_set_completed(host, EVENT_STOP_SENT))
+-		send_stop_cmd(host->mmc, data);
++	smp_wmb();
++	atmci_set_pending(host, EVENT_XFER_COMPLETE);
+ }
+ 
+-static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
++static void atmci_cmd_interrupt(struct atmel_mci *host, u32 status)
+ {
+-	struct atmel_mci	*host = mmc_priv(mmc);
+-
+ 	mci_writel(host, IDR, MCI_CMDRDY);
+ 
+-	if (atmci_is_completed(host, EVENT_STOP_SENT)) {
+-		host->stop_status = status;
+-		atmci_set_pending(host, EVENT_STOP_COMPLETE);
+-	} else {
+-		host->cmd_status = status;
+-		atmci_set_pending(host, EVENT_CMD_COMPLETE);
+-	}
+-
++	host->cmd_status = status;
++	smp_wmb();
++	atmci_set_pending(host, EVENT_CMD_COMPLETE);
+ 	tasklet_schedule(&host->tasklet);
+ }
+ 
+ static irqreturn_t atmci_interrupt(int irq, void *dev_id)
+ {
+-	struct mmc_host		*mmc = dev_id;
+-	struct atmel_mci	*host = mmc_priv(mmc);
++	struct atmel_mci	*host = dev_id;
+ 	u32			status, mask, pending;
+ 	unsigned int		pass_count = 0;
+ 
+-	spin_lock(&mmc->lock);
+-
+ 	do {
+ 		status = mci_readl(host, SR);
+ 		mask = mci_readl(host, IMR);
+@@ -946,13 +1447,18 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id)
+ 			mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS
+ 					| MCI_RXRDY | MCI_TXRDY);
+ 			pending &= mci_readl(host, IMR);
++
+ 			host->data_status = status;
++			smp_wmb();
+ 			atmci_set_pending(host, EVENT_DATA_ERROR);
+ 			tasklet_schedule(&host->tasklet);
+ 		}
+ 		if (pending & MCI_NOTBUSY) {
+-			mci_writel(host, IDR, (MCI_NOTBUSY
+-					       | ATMCI_DATA_ERROR_FLAGS));
++			mci_writel(host, IDR,
++					ATMCI_DATA_ERROR_FLAGS | MCI_NOTBUSY);
++			if (!host->data_status)
++				host->data_status = status;
++			smp_wmb();
+ 			atmci_set_pending(host, EVENT_DATA_COMPLETE);
+ 			tasklet_schedule(&host->tasklet);
+ 		}
+@@ -962,18 +1468,15 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id)
+ 			atmci_write_data_pio(host);
+ 
+ 		if (pending & MCI_CMDRDY)
+-			atmci_cmd_interrupt(mmc, status);
++			atmci_cmd_interrupt(host, status);
+ 	} while (pass_count++ < 5);
+ 
+-	spin_unlock(&mmc->lock);
+-
+ 	return pass_count ? IRQ_HANDLED : IRQ_NONE;
+ }
+ 
+ static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
+ {
+-	struct mmc_host		*mmc = dev_id;
+-	struct atmel_mci	*host = mmc_priv(mmc);
++	struct atmel_mci_slot	*slot = dev_id;
+ 
+ 	/*
+ 	 * Disable interrupts until the pin has stabilized and check
+@@ -981,19 +1484,176 @@ static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
+ 	 * middle of the timer routine when this interrupt triggers.
+ 	 */
+ 	disable_irq_nosync(irq);
+-	mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20));
++	mod_timer(&slot->detect_timer, jiffies + msecs_to_jiffies(20));
+ 
+ 	return IRQ_HANDLED;
+ }
+ 
++#ifdef CONFIG_MMC_ATMELMCI_DMA
++
++static inline struct atmel_mci *
++dma_client_to_atmel_mci(struct dma_client *client)
++{
++	return container_of(client, struct atmel_mci, dma.client);
++}
++
++static enum dma_state_client atmci_dma_event(struct dma_client *client,
++		struct dma_chan *chan, enum dma_state state)
++{
++	struct atmel_mci	*host;
++	enum dma_state_client	ret = DMA_NAK;
++
++	host = dma_client_to_atmel_mci(client);
++
++	switch (state) {
++	case DMA_RESOURCE_AVAILABLE:
++		spin_lock_bh(&host->lock);
++		if (!host->dma.chan) {
++			host->dma.chan = chan;
++			ret = DMA_ACK;
++		}
++		spin_unlock_bh(&host->lock);
++
++		if (ret == DMA_ACK)
++			dev_info(&host->pdev->dev,
++					"Using %s for DMA transfers\n",
++					chan->dev.bus_id);
++		break;
++
++	case DMA_RESOURCE_REMOVED:
++		spin_lock_bh(&host->lock);
++		if (host->dma.chan == chan) {
++			host->dma.chan = NULL;
++			ret = DMA_ACK;
++		}
++		spin_unlock_bh(&host->lock);
++
++		if (ret == DMA_ACK)
++			dev_info(&host->pdev->dev,
++					"Lost %s, falling back to PIO\n",
++					chan->dev.bus_id);
++		break;
++
++	default:
++		break;
++	}
++
++
++	return ret;
++}
++#endif /* CONFIG_MMC_ATMELMCI_DMA */
++
++static int __init atmci_init_slot(struct atmel_mci *host,
++		struct mci_slot_pdata *slot_data, unsigned int id,
++		u32 sdc_reg)
++{
++	struct mmc_host			*mmc;
++	struct atmel_mci_slot		*slot;
++
++	mmc = mmc_alloc_host(sizeof(struct atmel_mci_slot), &host->pdev->dev);
++	if (!mmc)
++		return -ENOMEM;
++
++	slot = mmc_priv(mmc);
++	slot->mmc = mmc;
++	slot->host = host;
++	slot->detect_pin = slot_data->detect_pin;
++	slot->wp_pin = slot_data->wp_pin;
++	slot->sdc_reg = sdc_reg;
++
++	mmc->ops = &atmci_ops;
++	mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512);
++	mmc->f_max = host->bus_hz / 2;
++	mmc->ocr_avail	= MMC_VDD_32_33 | MMC_VDD_33_34;
++	if (slot_data->bus_width >= 4)
++		mmc->caps |= MMC_CAP_4_BIT_DATA;
++
++	mmc->max_hw_segs = 64;
++	mmc->max_phys_segs = 64;
++	mmc->max_req_size = 32768 * 512;
++	mmc->max_blk_size = 32768;
++	mmc->max_blk_count = 512;
++
++	/* Assume card is present initially */
++	set_bit(ATMCI_CARD_PRESENT, &slot->flags);
++	if (gpio_is_valid(slot->detect_pin)) {
++		if (gpio_request(slot->detect_pin, "mmc_detect")) {
++			dev_dbg(&mmc->class_dev, "no detect pin available\n");
++			slot->detect_pin = -EBUSY;
++		} else if (gpio_get_value(slot->detect_pin)) {
++			clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
++		}
++	}
++
++	if (!gpio_is_valid(slot->detect_pin))
++		mmc->caps |= MMC_CAP_NEEDS_POLL;
++
++	if (gpio_is_valid(slot->wp_pin)) {
++		if (gpio_request(slot->wp_pin, "mmc_wp")) {
++			dev_dbg(&mmc->class_dev, "no WP pin available\n");
++			slot->wp_pin = -EBUSY;
++		}
++	}
++
++	host->slot[id] = slot;
++	mmc_add_host(mmc);
++
++	if (gpio_is_valid(slot->detect_pin)) {
++		int ret;
++
++		setup_timer(&slot->detect_timer, atmci_detect_change,
++				(unsigned long)slot);
++
++		ret = request_irq(gpio_to_irq(slot->detect_pin),
++				atmci_detect_interrupt,
++				IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
++				"mmc-detect", slot);
++		if (ret) {
++			dev_dbg(&mmc->class_dev,
++				"could not request IRQ %d for detect pin\n",
++				gpio_to_irq(slot->detect_pin));
++			gpio_free(slot->detect_pin);
++			slot->detect_pin = -EBUSY;
++		}
++	}
++
++	atmci_init_debugfs(slot);
++
++	return 0;
++}
++
++static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot,
++		unsigned int id)
++{
++	/* Debugfs stuff is cleaned up by mmc core */
++
++	set_bit(ATMCI_SHUTDOWN, &slot->flags);
++	smp_wmb();
++
++	mmc_remove_host(slot->mmc);
++
++	if (gpio_is_valid(slot->detect_pin)) {
++		int pin = slot->detect_pin;
++
++		free_irq(gpio_to_irq(pin), slot);
++		del_timer_sync(&slot->detect_timer);
++		gpio_free(pin);
++	}
++	if (gpio_is_valid(slot->wp_pin))
++		gpio_free(slot->wp_pin);
++
++	slot->host->slot[id] = NULL;
++	mmc_free_host(slot->mmc);
++}
++
+ static int __init atmci_probe(struct platform_device *pdev)
+ {
+ 	struct mci_platform_data	*pdata;
+-	struct atmel_mci *host;
+-	struct mmc_host *mmc;
+-	struct resource *regs;
+-	int irq;
+-	int ret;
++	struct atmel_mci		*host;
++	struct resource			*regs;
++	unsigned int			nr_slots;
++	int				irq;
++	int				ret;
+ 
+ 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ 	if (!regs)
+@@ -1005,15 +1665,13 @@ static int __init atmci_probe(struct platform_device *pdev)
+ 	if (irq < 0)
+ 		return irq;
+ 
+-	mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
+-	if (!mmc)
++	host = kzalloc(sizeof(struct atmel_mci), GFP_KERNEL);
++	if (!host)
+ 		return -ENOMEM;
+ 
+-	host = mmc_priv(mmc);
+ 	host->pdev = pdev;
+-	host->mmc = mmc;
+-	host->detect_pin = pdata->detect_pin;
+-	host->wp_pin = pdata->wp_pin;
++	spin_lock_init(&host->lock);
++	INIT_LIST_HEAD(&host->queue);
+ 
+ 	host->mck = clk_get(&pdev->dev, "mci_clk");
+ 	if (IS_ERR(host->mck)) {
+@@ -1033,122 +1691,102 @@ static int __init atmci_probe(struct platform_device *pdev)
+ 
+ 	host->mapbase = regs->start;
+ 
+-	mmc->ops = &atmci_ops;
+-	mmc->f_min = (host->bus_hz + 511) / 512;
+-	mmc->f_max = host->bus_hz / 2;
+-	mmc->ocr_avail	= MMC_VDD_32_33 | MMC_VDD_33_34;
+-	mmc->caps |= MMC_CAP_4_BIT_DATA;
++	tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)host);
+ 
+-	mmc->max_hw_segs = 64;
+-	mmc->max_phys_segs = 64;
+-	mmc->max_req_size = 32768 * 512;
+-	mmc->max_blk_size = 32768;
+-	mmc->max_blk_count = 512;
+-
+-	tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
+-
+-	ret = request_irq(irq, atmci_interrupt, 0, pdev->dev.bus_id, mmc);
++	ret = request_irq(irq, atmci_interrupt, 0, pdev->dev.bus_id, host);
+ 	if (ret)
+ 		goto err_request_irq;
+ 
+-	/* Assume card is present if we don't have a detect pin */
+-	host->present = 1;
+-	if (gpio_is_valid(host->detect_pin)) {
+-		if (gpio_request(host->detect_pin, "mmc_detect")) {
+-			dev_dbg(&mmc->class_dev, "no detect pin available\n");
+-			host->detect_pin = -1;
+-		} else {
+-			host->present = !gpio_get_value(host->detect_pin);
+-		}
+-	}
++#ifdef CONFIG_MMC_ATMELMCI_DMA
++	if (pdata->dma_slave) {
++		struct dma_slave *slave = pdata->dma_slave;
+ 
+-	if (!gpio_is_valid(host->detect_pin))
+-		mmc->caps |= MMC_CAP_NEEDS_POLL;
++		slave->tx_reg = regs->start + MCI_TDR;
++		slave->rx_reg = regs->start + MCI_RDR;
+ 
+-	if (gpio_is_valid(host->wp_pin)) {
+-		if (gpio_request(host->wp_pin, "mmc_wp")) {
+-			dev_dbg(&mmc->class_dev, "no WP pin available\n");
+-			host->wp_pin = -1;
+-		}
++		/* Try to grab a DMA channel */
++		host->dma.client.event_callback = atmci_dma_event;
++		dma_cap_set(DMA_SLAVE, host->dma.client.cap_mask);
++		host->dma.client.slave = slave;
++
++		dma_async_client_register(&host->dma.client);
++		dma_async_client_chan_request(&host->dma.client);
++	} else {
++		dev_notice(&pdev->dev, "DMA not available, using PIO\n");
+ 	}
++#endif /* CONFIG_MMC_ATMELMCI_DMA */
+ 
+ 	platform_set_drvdata(pdev, host);
+ 
+-	mmc_add_host(mmc);
+-
+-	if (gpio_is_valid(host->detect_pin)) {
+-		setup_timer(&host->detect_timer, atmci_detect_change,
+-				(unsigned long)host);
+-
+-		ret = request_irq(gpio_to_irq(host->detect_pin),
+-				atmci_detect_interrupt,
+-				IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+-				"mmc-detect", mmc);
+-		if (ret) {
+-			dev_dbg(&mmc->class_dev,
+-				"could not request IRQ %d for detect pin\n",
+-				gpio_to_irq(host->detect_pin));
+-			gpio_free(host->detect_pin);
+-			host->detect_pin = -1;
+-		}
++	/* We need at least one slot to succeed */
++	nr_slots = 0;
++	ret = -ENODEV;
++	if (pdata->slot[0].bus_width) {
++		ret = atmci_init_slot(host, &pdata->slot[0],
++				MCI_SDCSEL_SLOT_A, 0);
++		if (!ret)
++			nr_slots++;
++	}
++	if (pdata->slot[1].bus_width) {
++		ret = atmci_init_slot(host, &pdata->slot[1],
++				MCI_SDCSEL_SLOT_B, 1);
++		if (!ret)
++			nr_slots++;
+ 	}
+ 
+-	dev_info(&mmc->class_dev,
+-			"Atmel MCI controller at 0x%08lx irq %d\n",
+-			host->mapbase, irq);
++	if (!nr_slots)
++		goto err_init_slot;
+ 
+-	atmci_init_debugfs(host);
++	dev_info(&pdev->dev,
++			"Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
++			host->mapbase, irq, nr_slots);
+ 
+ 	return 0;
+ 
++err_init_slot:
++#ifdef CONFIG_MMC_ATMELMCI_DMA
++	if (pdata->dma_slave)
++		dma_async_client_unregister(&host->dma.client);
++#endif
++	free_irq(irq, host);
+ err_request_irq:
+ 	iounmap(host->regs);
+ err_ioremap:
+ 	clk_put(host->mck);
+ err_clk_get:
+-	mmc_free_host(mmc);
++	kfree(host);
+ 	return ret;
+ }
+ 
+ static int __exit atmci_remove(struct platform_device *pdev)
+ {
+-	struct atmel_mci *host = platform_get_drvdata(pdev);
++	struct atmel_mci	*host = platform_get_drvdata(pdev);
++	unsigned int		i;
+ 
+ 	platform_set_drvdata(pdev, NULL);
+ 
+-	if (host) {
+-		/* Debugfs stuff is cleaned up by mmc core */
+-
+-		if (gpio_is_valid(host->detect_pin)) {
+-			int pin = host->detect_pin;
+-
+-			/* Make sure the timer doesn't enable the interrupt */
+-			host->detect_pin = -1;
+-			smp_wmb();
+-
+-			free_irq(gpio_to_irq(pin), host->mmc);
+-			del_timer_sync(&host->detect_timer);
+-			gpio_free(pin);
+-		}
+-
+-		mmc_remove_host(host->mmc);
++	for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
++		if (host->slot[i])
++			atmci_cleanup_slot(host->slot[i], i);
++	}
+ 
+-		clk_enable(host->mck);
+-		mci_writel(host, IDR, ~0UL);
+-		mci_writel(host, CR, MCI_CR_MCIDIS);
+-		mci_readl(host, SR);
+-		clk_disable(host->mck);
++	clk_enable(host->mck);
++	mci_writel(host, IDR, ~0UL);
++	mci_writel(host, CR, MCI_CR_MCIDIS);
++	mci_readl(host, SR);
++	clk_disable(host->mck);
+ 
+-		if (gpio_is_valid(host->wp_pin))
+-			gpio_free(host->wp_pin);
++#ifdef CONFIG_MMC_ATMELMCI_DMA
++	if (host->dma.client.slave)
++		dma_async_client_unregister(&host->dma.client);
++#endif
+ 
+-		free_irq(platform_get_irq(pdev, 0), host->mmc);
+-		iounmap(host->regs);
++	free_irq(platform_get_irq(pdev, 0), host);
++	iounmap(host->regs);
+ 
+-		clk_put(host->mck);
++	clk_put(host->mck);
++	kfree(host);
+ 
+-		mmc_free_host(host->mmc);
+-	}
+ 	return 0;
+ }
+ 
+diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
+index 9e7a236..6033e74 100644
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -178,10 +178,18 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
+ 	if (atmel_pri.Features & 0x02)
+ 		extp->EraseSuspend = 2;
+ 
+-	if (atmel_pri.BottomBoot)
+-		extp->TopBottom = 2;
+-	else
+-		extp->TopBottom = 3;
++	/* Some chips got it backwards... */
++	if (cfi->id == AT49BV6416) {
++		if (atmel_pri.BottomBoot)
++			extp->TopBottom = 3;
++		else
++			extp->TopBottom = 2;
++	} else {
++		if (atmel_pri.BottomBoot)
++			extp->TopBottom = 2;
++		else
++			extp->TopBottom = 3;
++	}
+ 
+ 	/* burst write mode not supported */
+ 	cfi->cfiq->BufWriteTimeoutTyp = 0;
+diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
+index 3387e0d..4af80c0 100644
+--- a/drivers/mtd/nand/atmel_nand.c
++++ b/drivers/mtd/nand/atmel_nand.c
+@@ -500,7 +500,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
+ 	platform_set_drvdata(pdev, host);
+ 	atmel_nand_enable(host);
+ 
+-	if (host->board->det_pin) {
++	if (gpio_is_valid(host->board->det_pin)) {
+ 		if (gpio_get_value(host->board->det_pin)) {
+ 			printk("No SmartMedia card inserted.\n");
+ 			res = ENXIO;
+diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
+index 9a9755c..13f4fb0 100644
+--- a/drivers/rtc/Kconfig
++++ b/drivers/rtc/Kconfig
+@@ -559,6 +559,22 @@ config RTC_DRV_AT91SAM9_GPBR
+ 	  will be used.  The default of zero is normally OK to use, but
+ 	  on some systems other software needs to use that register.
+ 
++config RTC_DRV_AVR32_AST
++	tristate "AVR32 Asynchronous Timer"
++	depends on AVR32
++	help
++	  RTC driver for the AVR32 Asynchronous Timers. The AST is a
++	  simple and flexible timer that can be used both as a
++	  high-resolution system timer and an RTC, depending on what
++	  clock source it is running from.
++
++	  If you say yes here, and add one or more platform_device
++	  called "rtc-ast", those devices will be clocked from a
++	  32.768 kHz crystal oscillator and used as RTCs.
++
++	  This driver can also be built as a module. If so, the module
++	  will be called rtc-ast.
++
+ config RTC_DRV_BFIN
+ 	tristate "Blackfin On-Chip RTC"
+ 	depends on BLACKFIN && !BF561
+diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
+index 18622ef..5ad1266 100644
+--- a/drivers/rtc/Makefile
++++ b/drivers/rtc/Makefile
+@@ -20,6 +20,7 @@ rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o
+ obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
+ obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
+ obj-$(CONFIG_RTC_DRV_AT91SAM9)	+= rtc-at91sam9.o
++obj-$(CONFIG_RTC_DRV_AVR32_AST)	+= rtc-ast.o
+ obj-$(CONFIG_RTC_DRV_BFIN)	+= rtc-bfin.o
+ obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc-cmos.o
+ obj-$(CONFIG_RTC_DRV_DS1216)	+= rtc-ds1216.o
+diff --git a/drivers/rtc/rtc-ast.c b/drivers/rtc/rtc-ast.c
+new file mode 100644
+index 0000000..be7db91
+--- /dev/null
++++ b/drivers/rtc/rtc-ast.c
+@@ -0,0 +1,546 @@
++/*
++ * An RTC driver for the AVR32 Asynchronous Timer
++ *
++ * Copyright (C) 2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/rtc.h>
++
++#include <asm/ast_regs.h>
++
++/*
++ * The AST - ASynchronous Timer - is built around a simple cycle
++ * counter that can be driven from one of four selectable clocks with
++ * a selectable power-of-two prescaler. It also has two alarms (ALARM0
++ * and ALARM1) and two periodic event generators (PER0 and PER1). The
++ * latter can be driven by different tappings of the same prescaler
++ * that drives the counter.
++ *
++ * This driver uses the 32.768 kHz crystal oscillator as a clock
++ * source and a prescaler that gives a 1 Hz counter frequency. It uses
++ * ALARM0 to support both "old-school" and "wake" alarms, PER0 to
++ * support periodic interrupts (PIE) up to 16.384 kHz (at power-of-two
++ * intervals), and PER1 to support a 1 Hz update interrupt (UIE).
++ *
++ * Watchdog interrupts seem to be undocumented and unsupported by
++ * everyone else, so those are not supported for now.
++ *
++ * The AST can wake the system from any sleep mode given that the
++ * source clock is running. On AT32AP720x, the 32.768 kHz crystal
++ * oscillator runs in all sleep modes except "static" and "shutdown".
++ */
++
++/* 32768 Hz means up to 60 us for synchronization + a bit of slack */
++#define AST_SYNC_TIMEOUT_US	100
++
++#define AST_CLK_RATE		32768
++#define AST_1S_PRESCALER	14	/* log2(32768) - 1 */
++
++struct rtc_ast {
++	/* Protects I/O registers */
++	spinlock_t		lock;
++
++	struct rtc_device	*rtc;
++	void __iomem		*regs;
++	struct clk		*osc32;
++	struct clk		*pclk;
++};
++
++/*
++ * Because the AST is, well, asynchronous, we must make sure we don't
++ * write to certain registers while the previous write is being
++ * synchronized between clock domains. This affects writes to CR, CV,
++ * SCR, WER, PIRx and ARx. To keep the delays minimal, we always
++ * synchronize _before_ writes to these registers.
++ *
++ * This function is also used to synchronize when changing the clock
++ * source, using a different bit in the status register.
++ */
++static int ast_wait_ready(void __iomem *regs, unsigned int busy_mask)
++{
++	unsigned long	timeout = AST_SYNC_TIMEOUT_US;
++
++	while (ast_readl(regs, SR) & busy_mask) {
++		udelay(1);
++		if (--timeout == 0)
++			return -ETIMEDOUT;
++		cpu_relax();
++	}
++
++	return 0;
++}
++
++static void rtc_ast_release(struct device *dev)
++{
++	struct rtc_ast	*ast = dev_get_drvdata(dev);
++
++	/* Disable all interrupts */
++	clk_enable(ast->pclk);
++	ast_writel(ast->regs, IDR, ~0UL);
++	clk_disable(ast->pclk);
++}
++
++static int rtc_ast_ioctl(struct device *dev, unsigned int cmd,
++		unsigned long arg)
++{
++	struct rtc_ast	*ast = dev_get_drvdata(dev);
++	int		ret = 0;
++
++	clk_enable(ast->pclk);
++
++	switch (cmd) {
++		/* REVISIT: Should perhaps verify that irq_task is NULL */
++	case RTC_AIE_ON:
++		ast_writel(ast->regs, IER, AST_BIT(ALARM0));
++		break;
++	case RTC_AIE_OFF:
++		ast_writel(ast->regs, IDR, AST_BIT(ALARM0));
++		break;
++	case RTC_UIE_ON:
++		spin_lock_irq(&ast->lock);
++		ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
++		if (!ret) {
++			ast_writel(ast->regs, SCR, AST_BIT(PER1));
++			ast_writel(ast->regs, IER, AST_BIT(PER1));
++		}
++		spin_unlock_irq(&ast->lock);
++
++		break;
++	case RTC_UIE_OFF:
++		ast_writel(ast->regs, IDR, AST_BIT(PER1));
++		break;
++#if 0
++	case RTC_PIE_ON:
++		spin_lock_irq(&ast->lock);
++		ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
++		if (ret)
++			break;
++		ast_writel(ast->regs, SCR, AST_BIT(PER0));
++		spin_unlock_irq(&ast->lock);
++
++		ast_writel(ast->regs, IER, AST_BIT(PER0));
++		break;
++	case RTC_PIE_OFF:
++		ast_writel(ast->regs, IDR, AST_BIT(PER1));
++		break;
++#endif
++	default:
++		ret = -ENOIOCTLCMD;
++		break;
++	}
++
++	clk_disable(ast->pclk);
++
++	return ret;
++}
++
++static int rtc_ast_read_time(struct device *dev, struct rtc_time *tm)
++{
++	struct rtc_ast	*ast = dev_get_drvdata(dev);
++
++	clk_enable(ast->pclk);
++	rtc_time_to_tm(ast_readl(ast->regs, CV), tm);
++	clk_disable(ast->pclk);
++
++	return 0;
++}
++
++static int rtc_ast_set_mmss(struct device *dev, unsigned long secs)
++{
++	struct rtc_ast	*ast = dev_get_drvdata(dev);
++	int		ret;
++
++	clk_enable(ast->pclk);
++
++	spin_lock_irq(&ast->lock);
++	ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
++	if (!ret)
++		ast_writel(ast->regs, CV, secs);
++	spin_unlock_irq(&ast->lock);
++
++	clk_disable(ast->pclk);
++
++	return ret;
++}
++
++static int rtc_ast_set_time(struct device *dev, struct rtc_time *tm)
++{
++	unsigned long	secs;
++	int		ret;
++
++	ret = rtc_tm_to_time(tm, &secs);
++	if (!ret)
++		ret = rtc_ast_set_mmss(dev, secs);
++
++	return ret;
++}
++
++static int rtc_ast_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++	struct rtc_ast	*ast = dev_get_drvdata(dev);
++
++	clk_enable(ast->pclk);
++
++	spin_lock_irq(&ast->lock);
++	rtc_time_to_tm(ast_readl(ast->regs, AR0), &alrm->time);
++	alrm->enabled = !!(ast_readl(ast->regs, IMR) & AST_BIT(ALARM0));
++	alrm->pending = !!(ast_readl(ast->regs, SR) & AST_BIT(ALARM0));
++	spin_unlock_irq(&ast->lock);
++
++	clk_disable(ast->pclk);
++
++	return 0;
++}
++
++static int rtc_ast_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++	struct rtc_ast	*ast = dev_get_drvdata(dev);
++	unsigned long	seconds;
++	int		ret;
++
++	ret = rtc_tm_to_time(&alrm->time, &seconds);
++	if (ret)
++		return ret;
++
++	clk_enable(ast->pclk);
++
++	/*
++	 * REVISIT: The alarm may trigger before we are done here.
++	 * Who's responsible for handling that?
++	 *
++	 * We don't want to clear the ALARM0 flag before we update AR0
++	 * because the previous value of AR0 might trigger an alarm
++	 * right after we clear the flag.
++	 */
++	spin_lock_irq(&ast->lock);
++	ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
++	if (ret)
++		goto unlock;
++	ast_writel(ast->regs, AR0, seconds);
++
++	/* Try to avoid synchronization penalty */
++	if (ast_readl(ast->regs, SR) & AST_BIT(ALARM0)) {
++		ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
++		if (ret)
++			goto unlock;
++		ast_writel(ast->regs, SCR, AST_BIT(ALARM0));
++	}
++
++	if (alrm->enabled)
++		ast_writel(ast->regs, IER, AST_BIT(ALARM0));
++
++unlock:
++	spin_unlock_irq(&ast->lock);
++	clk_disable(ast->pclk);
++
++	return ret;
++}
++
++static int rtc_ast_proc(struct device *dev, struct seq_file *seq)
++{
++	struct rtc_ast	*ast = dev_get_drvdata(dev);
++	u32		imr;
++
++	clk_enable(ast->pclk);
++	imr = ast_readl(ast->regs, IMR);
++	clk_disable(ast->pclk);
++
++	return seq_printf(seq,
++			"periodic_IRQ\t: %s\n"
++			"update_IRQ\t: %s\n"
++			"periodic_freq\t: %d\n",
++			(imr & AST_BIT(PER0)) ? "yes" : "no",
++			(imr & AST_BIT(PER1)) ? "yes" : "no",
++			ast->rtc->irq_freq);
++}
++
++static int rtc_ast_irq_set_freq(struct device *dev, int freq)
++{
++	struct rtc_ast	*ast = dev_get_drvdata(dev);
++	unsigned int	pres_bit;
++	int		ret;
++
++	/* RTC core currently ensures this. */
++	BUG_ON(!freq);
++
++	pres_bit = __ffs(freq);
++	if (pres_bit > AST_1S_PRESCALER)
++		return -EINVAL;
++	pres_bit = AST_1S_PRESCALER - pres_bit;
++
++	clk_enable(ast->pclk);
++
++	spin_lock_irq(&ast->lock);
++	ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
++	if (ret)
++		goto unlock;
++
++	ast_writel(ast->regs, PIR0, pres_bit);
++
++unlock:
++	spin_unlock_irq(&ast->lock);
++	clk_disable(ast->pclk);
++
++	return ret;
++}
++
++static int rtc_ast_irq_set_state(struct device *dev, int enabled)
++{
++	struct rtc_ast	*ast = dev_get_drvdata(dev);
++	int		ret = 0;
++
++	clk_enable(ast->pclk);
++
++	if (enabled) {
++		spin_lock_irq(&ast->lock);
++		ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
++		if (!ret) {
++			ast_writel(ast->regs, SCR, AST_BIT(PER0));
++			ast_writel(ast->regs, IER, AST_BIT(PER0));
++		}
++		spin_unlock_irq(&ast->lock);
++	} else {
++		ast_writel(ast->regs, IDR, AST_BIT(PER1));
++	}
++
++	clk_disable(ast->pclk);
++
++	return ret;
++}
++
++static const struct rtc_class_ops rtc_ast_ops = {
++	.release	= rtc_ast_release,
++	.ioctl		= rtc_ast_ioctl,
++	.read_time	= rtc_ast_read_time,
++	.set_time	= rtc_ast_set_time,
++	.read_alarm	= rtc_ast_read_alarm,
++	.set_alarm	= rtc_ast_set_alarm,
++	.proc		= rtc_ast_proc,
++	.set_mmss	= rtc_ast_set_mmss,
++	.irq_set_freq	= rtc_ast_irq_set_freq,
++	.irq_set_state	= rtc_ast_irq_set_state,
++};
++
++static irqreturn_t rtc_ast_interrupt(int irq, void *dev_id)
++{
++	struct rtc_ast	*ast = dev_id;
++	unsigned long	events;
++	unsigned long	num;
++	u32		status;
++	u32		pending;
++	irqreturn_t	ret = IRQ_NONE;
++
++	clk_enable(ast->pclk);
++	spin_lock(&ast->lock);
++
++	status = ast_readl(ast->regs, SR);
++	pending = status & ast_readl(ast->regs, IMR);
++	if (unlikely(!pending))
++		goto out;
++
++	ast_wait_ready(ast->regs, AST_BIT(BUSY));
++	ast_writel(ast->regs, SCR, pending);
++
++	events = RTC_IRQF;
++	num = 0;
++	if (pending & AST_BIT(ALARM0)) {
++		num++;
++		events |= RTC_AF;
++	}
++	if (pending & AST_BIT(PER0)) {
++		num++;
++		events |= RTC_PF;
++	}
++	if (pending & AST_BIT(PER1)) {
++		num++;
++		events |= RTC_UF;
++	}
++
++	rtc_update_irq(ast->rtc, num, events);
++	ret = IRQ_HANDLED;
++
++out:
++	spin_unlock(&ast->lock);
++	clk_disable(ast->pclk);
++
++	return IRQ_HANDLED;
++}
++
++static int __init rtc_ast_probe(struct platform_device *pdev)
++{
++	struct resource	*regs;
++	struct rtc_ast	*ast;
++	int		irq;
++	int		ret;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs) {
++		dev_dbg(&pdev->dev, "no mmio resource\n");
++		return -ENXIO;
++	}
++
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0) {
++		dev_dbg(&pdev->dev, "no irq\n");
++		return -ENXIO;
++	}
++
++	ast = kzalloc(sizeof(struct rtc_ast), GFP_KERNEL);
++	if (!ast) {
++		dev_dbg(&pdev->dev, "out of memory\n");
++		return -ENOMEM;
++	}
++
++	ast->osc32 = clk_get(NULL, "osc32k");
++	if (IS_ERR(ast->osc32)) {
++		ret = PTR_ERR(ast->osc32);
++		dev_dbg(&pdev->dev, "no 32 kHz oscillator\n");
++		goto err_osc32;
++	}
++
++	ast->pclk = clk_get(&pdev->dev, "pclk");
++	if (IS_ERR(ast->pclk)) {
++		ret = PTR_ERR(ast->pclk);
++		dev_dbg(&pdev->dev, "no peripheral clock\n");
++		goto err_pclk;
++	}
++
++	spin_lock_init(&ast->lock);
++
++	ast->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!ast->regs) {
++		dev_dbg(&pdev->dev, "failed to map registers\n");
++		ret = -ENOMEM;
++		goto err_ioremap;
++	}
++
++	clk_enable(ast->osc32);
++	clk_enable(ast->pclk);
++
++	/* Initialize the AST if it isn't running already */
++	if (!(ast_readl(ast->regs, CR) & AST_BIT(CR_EN))) {
++		ast_wait_ready(ast->regs, AST_BIT(CLK_BUSY));
++		ast_writel(ast->regs, CLOCK,
++				AST_BF(CLOCK_CSSEL, AST_CLOCK_OSC32)
++				| AST_BIT(CLOCK_CEN));
++		ret = ast_wait_ready(ast->regs, AST_BIT(CLK_BUSY));
++		if (ret) {
++			dev_dbg(&pdev->dev,
++				"timed out selecting clock source\n");
++			goto err_clksel;
++		}
++		ast_wait_ready(ast->regs, AST_BIT(BUSY));
++		ast_writel(ast->regs, CV, 0);
++		ast_wait_ready(ast->regs, AST_BIT(BUSY));
++		ast_writel(ast->regs, CR, AST_BIT(CR_EN) | AST_BIT(CR_PCLR)
++				| AST_BF(CR_PSEL, AST_1S_PRESCALER));
++	}
++
++	ast_writel(ast->regs, IDR, ~0UL);
++	ast_wait_ready(ast->regs, AST_BIT(BUSY));
++	ast_writel(ast->regs, WER, 0);
++	ast_wait_ready(ast->regs, AST_BIT(BUSY));
++	ast_writel(ast->regs, PIR0, AST_1S_PRESCALER);
++	ast_wait_ready(ast->regs, AST_BIT(BUSY));
++	ast_writel(ast->regs, PIR1, AST_1S_PRESCALER);
++
++	ret = request_irq(irq, rtc_ast_interrupt, 0, "rtc-ast", ast);
++	if (ret) {
++		dev_dbg(&pdev->dev, "could not request irq %d\n", irq);
++		goto err_request_irq;
++	}
++
++	ast->rtc = rtc_device_register("rtc-ast", &pdev->dev,
++			&rtc_ast_ops, THIS_MODULE);
++	if (IS_ERR(ast->rtc)) {
++		dev_dbg(&pdev->dev, "could not register rtc device\n");
++		ret = PTR_ERR(ast->rtc);
++		goto err_register;
++	}
++
++	ast->rtc->max_user_freq = AST_CLK_RATE / 2;
++	ast->rtc->irq_freq = 1;
++
++	ast_wait_ready(ast->regs, AST_BIT(BUSY));
++	clk_disable(ast->pclk);
++	platform_set_drvdata(pdev, ast);
++	device_init_wakeup(&pdev->dev, 1);
++
++	dev_info(&pdev->dev, "AVR32 Asynchronous Timer at %08lx irq %d\n",
++			(unsigned long)regs->start, irq);
++
++	return 0;
++
++err_register:
++	free_irq(irq, ast);
++err_request_irq:
++err_clksel:
++	clk_disable(ast->pclk);
++	clk_disable(ast->osc32);
++	iounmap(ast->regs);
++err_ioremap:
++	clk_put(ast->pclk);
++err_pclk:
++	clk_put(ast->osc32);
++err_osc32:
++	kfree(ast);
++	return ret;
++}
++
++static int __exit rtc_ast_remove(struct platform_device *pdev)
++{
++	struct rtc_ast *ast = platform_get_drvdata(pdev);
++
++	device_init_wakeup(&pdev->dev, 0);
++
++	clk_enable(ast->pclk);
++	ast_writel(ast->regs, IDR, ~0UL);
++	ast_readl(ast->regs, IMR);
++	clk_disable(ast->pclk);
++
++	free_irq(platform_get_irq(pdev, 0), ast);
++	rtc_device_unregister(ast->rtc);
++	clk_disable(ast->osc32);
++	iounmap(ast->regs);
++	clk_put(ast->pclk);
++	clk_put(ast->osc32);
++	kfree(ast);
++
++	platform_set_drvdata(pdev, NULL);
++
++	return 0;
++}
++
++static struct platform_driver rtc_ast_driver = {
++	.remove		= __exit_p(rtc_ast_remove),
++	.driver		= {
++		.name	= "rtc-ast",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init rtc_ast_init(void)
++{
++	return platform_driver_probe(&rtc_ast_driver, rtc_ast_probe);
++}
++module_init(rtc_ast_init);
++
++static void __exit rtc_ast_exit(void)
++{
++	platform_driver_unregister(&rtc_ast_driver);
++}
++module_exit(rtc_ast_exit);
++
++MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>");
++MODULE_DESCRIPTION("AVR32 Asynchronous Timer RTC");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
+index b9d0efb..ebfb883 100644
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -53,9 +53,14 @@ if SPI_MASTER
+ 
+ comment "SPI Master Controller Drivers"
+ 
++config SPI_ATMEL_HAVE_PDC
++	def_bool y
++	depends on (ARCH_AT91 || CPU_AT32AP700X)
++
+ config SPI_ATMEL
+ 	tristate "Atmel SPI Controller"
+ 	depends on (ARCH_AT91 || AVR32)
++	depends on SPI_ATMEL_HAVE_PDC || DMA_ENGINE
+ 	help
+ 	  This selects a driver for the Atmel SPI Controller, present on
+ 	  many AT32 (AVR32) and AT91 (ARM) chips.
+diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
+index 02f9320..5afae71 100644
+--- a/drivers/spi/atmel_spi.c
++++ b/drivers/spi/atmel_spi.c
+@@ -1,306 +1,445 @@
+ /*
+  * Driver for Atmel AT32 and AT91 SPI Controllers
+  *
+- * Copyright (C) 2006 Atmel Corporation
++ * Copyright (C) 2006-2008 Atmel Corporation
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License version 2 as
+  * published by the Free Software Foundation.
+  */
+ 
+-#include <linux/kernel.h>
+-#include <linux/init.h>
+ #include <linux/clk.h>
+-#include <linux/module.h>
+-#include <linux/platform_device.h>
+ #include <linux/delay.h>
+ #include <linux/dma-mapping.h>
++#include <linux/dmaengine.h>
+ #include <linux/err.h>
++#include <linux/gpio.h>
++#include <linux/init.h>
+ #include <linux/interrupt.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/wait.h>
++#include <linux/workqueue.h>
++#include <linux/spi/atmel_spi.h>
+ #include <linux/spi/spi.h>
+ 
+-#include <asm/io.h>
+-#include <mach/board.h>
+-#include <mach/gpio.h>
+ #include <mach/cpu.h>
+ 
+ #include "atmel_spi.h"
+ 
+-/*
+- * The core SPI transfer engine just talks to a register bank to set up
+- * DMA transfers; transfer queue progress is driven by IRQs.  The clock
+- * framework provides the base clock, subdivided for each spi_device.
+- *
+- * Newer controllers, marked with "new_1" flag, have:
+- *  - CR.LASTXFER
+- *  - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero)
+- *  - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs)
+- *  - SPI_CSRx.CSAAT
+- *  - SPI_CSRx.SBCR allows faster clocking
++#define BUFFER_SIZE		PAGE_SIZE
++#define INVALID_DMA_ADDRESS	0xffffffff
++#define MAX_SG_SEGS		8
++
++/**
++ * struct atmel_spi - SPI master controller state
++ * @lock: Spinlock protecting the @queue, @stay and @stopping fields
++ *	as well as the hardware registers.
++ * @regs: Base address of the hardware registers.
++ * @wait: Waitqueue used to wait for DMA completion or errors.
++ * @pending: Number of DMA transfers currently pending.
++ * @pending_bytes: Number of bytes submitted for DMA but not yet
++ *	accounted for.
++ * @error: Data transfer error detected by interrupt handler. When this
++ *	is set to a nonzero value, the DMA engine is stopped, @pending
++ *	is set to 0 and @wait is triggered.
++ * @buffer: Scratch buffer for use when the upper layers didn't provide
++ *	a TX or RX buffer.
++ * @buffer_dma: DMA address of @buffer.
++ * @buffer_size: Length of @buffer in bytes.
++ * @queue: SPI messages queued for transfer.
++ * @workqueue: Per-controller workqueue.
++ * @work: Queue processing work struct.
++ * @stay: If the last SPI message caused the SPI device to stay active,
++ *	this points to the SPI device associated with that message. NULL
++ *	otherwise.
++ * @clk: Bus clock connected to the controller.
++ * @base_hz: Base clock rate in Hz used for baud rate calculations.
++ * @stopping: Queue is being stopped. No new messages are started.
++ * @always_bounce: Always do transfers to/from bounce buffer.
++ * @pdev: Platform device associated with the controller.
+  */
+ struct atmel_spi {
+ 	spinlock_t		lock;
+-
+ 	void __iomem		*regs;
+-	int			irq;
+-	struct clk		*clk;
+-	struct platform_device	*pdev;
+-	unsigned		new_1:1;
+-	struct spi_device	*stay;
+ 
+-	u8			stopping;
+-	struct list_head	queue;
+-	struct spi_transfer	*current_transfer;
+-	unsigned long		current_remaining_bytes;
+-	struct spi_transfer	*next_transfer;
+-	unsigned long		next_remaining_bytes;
++	wait_queue_head_t	wait;
++	int			pending;
++	size_t			pending_bytes;
++#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
++	struct scatterlist	tx_sg[MAX_SG_SEGS];
++	struct scatterlist	rx_sg[MAX_SG_SEGS];
++	unsigned int		sg_len;
++	struct dma_async_tx_descriptor *tx_desc;
++	struct dma_async_tx_descriptor *rx_desc;
++	struct dma_chan		*tx_chan;
++	struct dma_chan		*rx_chan;
++	struct dma_client	rx_client;
++	struct dma_client	tx_client;
++#endif
++	int			error;
+ 
+ 	void			*buffer;
+ 	dma_addr_t		buffer_dma;
++	size_t			buffer_size;
++
++	struct list_head	queue;
++	struct workqueue_struct	*workqueue;
++	struct work_struct	work;
++	struct spi_device	*stay;
++	struct clk		*clk;
++	unsigned long		base_hz;
++	bool			stopping;
++	bool			always_bounce;
++
++	struct platform_device	*pdev;
++#ifdef CONFIG_DEBUG_FS
++	struct dentry		*debugfs_root;
++#endif
+ };
+ 
+-#define BUFFER_SIZE		PAGE_SIZE
+-#define INVALID_DMA_ADDRESS	0xffffffff
++/**
++ * struct atmel_spi_device - Controller-specific per-slave state
++ * @npcs_pin: GPIO pin ID hooked up to this SPI slave.
++ * @csr: CSRn register value used when talking to this SPI slave.
++ */
++struct atmel_spi_device {
++	unsigned int		npcs_pin;
++	u32			csr;
++};
+ 
+ /*
+- * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby
+- * they assume that spi slave device state will not change on deselect, so
+- * that automagic deselection is OK.  ("NPCSx rises if no data is to be
+- * transmitted")  Not so!  Workaround uses nCSx pins as GPIOs; or newer
+- * controllers have CSAAT and friends.
+- *
+- * Since the CSAAT functionality is a bit weird on newer controllers as
+- * well, we use GPIO to control nCSx pins on all controllers, updating
+- * MR.PCS to avoid confusing the controller.  Using GPIOs also lets us
+- * support active-high chipselects despite the controller's belief that
+- * only active-low devices/systems exists.
++ * Version 2 of the SPI controller has
++ *  - CR.LASTXFER
++ *  - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero)
++ *  - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs)
++ *  - SPI_CSRx.CSAAT
++ *  - SPI_CSRx.SBCR allows faster clocking
+  *
+- * However, at91rm9200 has a second erratum whereby nCS0 doesn't work
+- * right when driven with GPIO.  ("Mode Fault does not allow more than one
+- * Master on Chip Select 0.")  No workaround exists for that ... so for
+- * nCS0 on that chip, we (a) don't use the GPIO, (b) can't support CS_HIGH,
+- * and (c) will trigger that first erratum in some cases.
++ * We can determine the controller version by reading the VERSION
++ * register, but I haven't checked that it exists on all chips, and
++ * this is cheaper anyway.
+  */
+-
+-static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
++static bool atmel_spi_is_v2(void)
+ {
+-	unsigned gpio = (unsigned) spi->controller_data;
+-	unsigned active = spi->mode & SPI_CS_HIGH;
+-	u32 mr;
+-	int i;
+-	u32 csr;
+-	u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0;
++	return !cpu_is_at91rm9200();
++}
+ 
+-	/* Make sure clock polarity is correct */
+-	for (i = 0; i < spi->master->num_chipselect; i++) {
+-		csr = spi_readl(as, CSR0 + 4 * i);
+-		if ((csr ^ cpol) & SPI_BIT(CPOL))
+-			spi_writel(as, CSR0 + 4 * i, csr ^ SPI_BIT(CPOL));
+-	}
++static bool atmel_spi_xfer_is_last(struct spi_message *msg,
++		struct spi_transfer *xfer)
++{
++	return &xfer->transfer_list == msg->transfers.prev;
++}
+ 
+-	mr = spi_readl(as, MR);
+-	mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr);
++/*-------------------------------------------------------------------------*/
+ 
+-	dev_dbg(&spi->dev, "activate %u%s, mr %08x\n",
+-			gpio, active ? " (high)" : "",
+-			mr);
++/*
++ * GCC doesn't eliminate _all_ the dead code, only some of it. In
++ * particular, the file operations appear to be difficult even if the
++ * file operations struct itself gets eliminated.
++ *
++ * So let's do the CPP dance.
++ */
++#ifdef CONFIG_DEBUG_FS
+ 
+-	if (!(cpu_is_at91rm9200() && spi->chip_select == 0))
+-		gpio_set_value(gpio, active);
+-	spi_writel(as, MR, mr);
+-}
++#include <linux/debugfs.h>
++#include <linux/seq_file.h>
+ 
+-static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
++static int atmel_spi_queue_show(struct seq_file *s, void *v)
+ {
+-	unsigned gpio = (unsigned) spi->controller_data;
+-	unsigned active = spi->mode & SPI_CS_HIGH;
+-	u32 mr;
++	struct atmel_spi	*as = s->private;
++	struct spi_message	*msg;
++	struct spi_transfer	*xfer;
+ 
+-	/* only deactivate *this* device; sometimes transfers to
+-	 * another device may be active when this routine is called.
+-	 */
+-	mr = spi_readl(as, MR);
+-	if (~SPI_BFEXT(PCS, mr) & (1 << spi->chip_select)) {
+-		mr = SPI_BFINS(PCS, 0xf, mr);
+-		spi_writel(as, MR, mr);
++	spin_lock_irq(&as->lock);
++	list_for_each_entry(msg, &as->queue, queue) {
++		seq_printf(s, "msg to %s:%s DMA mapped, status %d actual %u\n",
++				msg->spi->dev.bus_id,
++				msg->is_dma_mapped ? "" : " Not",
++				msg->status, msg->actual_length);
++		list_for_each_entry(xfer, &msg->transfers, transfer_list) {
++			seq_printf(s, "  t%p r%p l%u%s %u bits %u us %u Hz\n",
++					xfer->tx_buf, xfer->rx_buf, xfer->len,
++					xfer->cs_change ? "cs_change" : "",
++					xfer->bits_per_word,
++					xfer->delay_usecs,
++					xfer->speed_hz);
++		}
+ 	}
++	spin_unlock_irq(&as->lock);
+ 
+-	dev_dbg(&spi->dev, "DEactivate %u%s, mr %08x\n",
+-			gpio, active ? " (low)" : "",
+-			mr);
+-
+-	if (!(cpu_is_at91rm9200() && spi->chip_select == 0))
+-		gpio_set_value(gpio, !active);
++	return 0;
+ }
+ 
+-static inline int atmel_spi_xfer_is_last(struct spi_message *msg,
+-					struct spi_transfer *xfer)
++static int atmel_spi_queue_open(struct inode *inode, struct file *file)
+ {
+-	return msg->transfers.prev == &xfer->transfer_list;
++	return single_open(file, atmel_spi_queue_show, inode->i_private);
+ }
+ 
+-static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer)
++static const struct file_operations atmel_spi_queue_fops = {
++	.owner		= THIS_MODULE,
++	.open		= atmel_spi_queue_open,
++	.read		= seq_read,
++	.llseek		= seq_lseek,
++	.release	= single_release,
++};
++
++static void atmel_spi_show_status_reg(struct seq_file *s,
++		const char *regname, u32 value)
+ {
+-	return xfer->delay_usecs == 0 && !xfer->cs_change;
++	static const char	*sr_bit[] = {
++		[0]	= "RDRF",
++		[1]	= "TDRE",
++		[2]	= "MODF",
++		[3]	= "OVRES",
++		[4]	= "ENDRX",
++		[5]	= "ENDTX",
++		[6]	= "RXBUFF",
++		[7]	= "TXBUFE",
++		[8]	= "NSSR",
++		[9]	= "TXEMPTY",
++		[16]	= "SPIENS",
++	};
++	unsigned int		i;
++
++	seq_printf(s, "%s:\t0x%08x", regname, value);
++	for (i = 0; i < ARRAY_SIZE(sr_bit); i++) {
++		if (value & (1 << i)) {
++			if (sr_bit[i])
++				seq_printf(s, " %s", sr_bit[i]);
++			else
++				seq_printf(s, " UNKNOWN(%u)", i);
++		}
++	}
++	seq_putc(s, '\n');
+ }
+ 
+-static void atmel_spi_next_xfer_data(struct spi_master *master,
+-				struct spi_transfer *xfer,
+-				dma_addr_t *tx_dma,
+-				dma_addr_t *rx_dma,
+-				u32 *plen)
++static int atmel_spi_regs_show(struct seq_file *s, void *v)
+ {
+-	struct atmel_spi	*as = spi_master_get_devdata(master);
+-	u32			len = *plen;
++	struct atmel_spi	*as = s->private;
++	unsigned int		i;
++	u32			value;
++	u32			*buf;
+ 
+-	/* use scratch buffer only when rx or tx data is unspecified */
+-	if (xfer->rx_buf)
+-		*rx_dma = xfer->rx_dma + xfer->len - len;
+-	else {
+-		*rx_dma = as->buffer_dma;
+-		if (len > BUFFER_SIZE)
+-			len = BUFFER_SIZE;
+-	}
+-	if (xfer->tx_buf)
+-		*tx_dma = xfer->tx_dma + xfer->len - len;
+-	else {
+-		*tx_dma = as->buffer_dma;
+-		if (len > BUFFER_SIZE)
+-			len = BUFFER_SIZE;
+-		memset(as->buffer, 0, len);
+-		dma_sync_single_for_device(&as->pdev->dev,
+-				as->buffer_dma, len, DMA_TO_DEVICE);
+-	}
++	buf = kmalloc(0x200, GFP_KERNEL);
++	if (!buf)
++		return -ENOMEM;
+ 
+-	*plen = len;
+-}
++	/* Grab a more or less consistent snapshot */
++	spin_lock_irq(&as->lock);
++	memcpy_fromio(buf, as->regs, 0x200);
++	spin_unlock_irq(&as->lock);
+ 
+-/*
+- * Submit next transfer for DMA.
+- * lock is held, spi irq is blocked
+- */
+-static void atmel_spi_next_xfer(struct spi_master *master,
+-				struct spi_message *msg)
+-{
+-	struct atmel_spi	*as = spi_master_get_devdata(master);
+-	struct spi_transfer	*xfer;
+-	u32			len, remaining;
+-	u32			ieval;
+-	dma_addr_t		tx_dma, rx_dma;
+-
+-	if (!as->current_transfer)
+-		xfer = list_entry(msg->transfers.next,
+-				struct spi_transfer, transfer_list);
+-	else if (!as->next_transfer)
+-		xfer = list_entry(as->current_transfer->transfer_list.next,
+-				struct spi_transfer, transfer_list);
+-	else
+-		xfer = NULL;
++	value = buf[SPI_MR / 4];
++	seq_printf(s, "MR:\t0x%08x%s%s%s%s%s%s PCS=%x DLYBCS=%u\n",
++			value,
++			(value & SPI_BIT(MSTR)) ? " MSTR" : "",
++			(value & SPI_BIT(PS)) ? " PS" : "",
++			(value & SPI_BIT(PCSDEC)) ? " PCSDEC" : "",
++			(value & SPI_BIT(FDIV)) ? " FDIV" : "",
++			(value & SPI_BIT(MODFDIS)) ? " MODFDIS" : "",
++			(value & SPI_BIT(LLB)) ? " LLB" : "",
++			SPI_BFEXT(PCS, value),
++			SPI_BFEXT(DLYBCS, value));
++
++	atmel_spi_show_status_reg(s, "SR", buf[SPI_SR / 4]);
++	atmel_spi_show_status_reg(s, "IMR", buf[SPI_IMR / 4]);
++
++	for (i = 0; i < 4; i++) {
++		value = buf[SPI_CSR0 / 4 + i];
++		seq_printf(s, "CSR%u:\t0x%08x%s%s%s\n",
++				i, value,
++				(value & SPI_BIT(CPOL)) ? " CPOL" : "",
++				(value & SPI_BIT(NCPHA)) ? " NCPHA" : "",
++				(value & SPI_BIT(CSAAT)) ? " CSAAT" : "");
++		seq_printf(s, "\t\tBITS=%u SCBR=%u DLYBS=%u DLYBCT=%u\n",
++				SPI_BFEXT(BITS, value) + 8,
++				SPI_BFEXT(SCBR, value),
++				SPI_BFEXT(DLYBS, value),
++				SPI_BFEXT(DLYBCT, value));
++	}
+ 
+-	if (xfer) {
+-		spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
++	seq_printf(s, "RPR:\t0x%08x\n", buf[SPI_RPR / 4]);
++	seq_printf(s, "RCR:\t0x%08x\n", buf[SPI_RCR / 4]);
++	seq_printf(s, "TPR:\t0x%08x\n", buf[SPI_TPR / 4]);
++	seq_printf(s, "TCR:\t0x%08x\n", buf[SPI_TCR / 4]);
++	seq_printf(s, "RNPR:\t0x%08x\n", buf[SPI_RNPR / 4]);
++	seq_printf(s, "RNCR:\t0x%08x\n", buf[SPI_RNCR / 4]);
++	seq_printf(s, "TNPR:\t0x%08x\n", buf[SPI_TNPR / 4]);
++	seq_printf(s, "TNCR:\t0x%08x\n", buf[SPI_TNCR / 4]);
+ 
+-		len = xfer->len;
+-		atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
+-		remaining = xfer->len - len;
++	value = buf[SPI_PTSR / 4];
++	seq_printf(s, "PTSR:\t0x%08x%s%s\n", value,
++			(value & SPI_BIT(RXTEN)) ? " RXTEN" : "",
++			(value & SPI_BIT(TXTEN)) ? " TXTEN" : "");
+ 
+-		spi_writel(as, RPR, rx_dma);
+-		spi_writel(as, TPR, tx_dma);
++	kfree(buf);
+ 
+-		if (msg->spi->bits_per_word > 8)
+-			len >>= 1;
+-		spi_writel(as, RCR, len);
+-		spi_writel(as, TCR, len);
++	return 0;
++}
+ 
+-		dev_dbg(&msg->spi->dev,
+-			"  start xfer %p: len %u tx %p/%08x rx %p/%08x\n",
+-			xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
+-			xfer->rx_buf, xfer->rx_dma);
+-	} else {
+-		xfer = as->next_transfer;
+-		remaining = as->next_remaining_bytes;
+-	}
++static int atmel_spi_regs_open(struct inode *inode, struct file *file)
++{
++	return single_open(file, atmel_spi_regs_show, inode->i_private);
++}
+ 
+-	as->current_transfer = xfer;
+-	as->current_remaining_bytes = remaining;
++static const struct file_operations atmel_spi_regs_fops = {
++	.owner		= THIS_MODULE,
++	.open		= atmel_spi_regs_open,
++	.read		= seq_read,
++	.llseek		= seq_lseek,
++	.release	= single_release,
++};
+ 
+-	if (remaining > 0)
+-		len = remaining;
+-	else if (!atmel_spi_xfer_is_last(msg, xfer)
+-			&& atmel_spi_xfer_can_be_chained(xfer)) {
+-		xfer = list_entry(xfer->transfer_list.next,
+-				struct spi_transfer, transfer_list);
+-		len = xfer->len;
+-	} else
+-		xfer = NULL;
++static void atmel_spi_init_debugfs(struct atmel_spi *as)
++{
++	struct dentry	*root;
++	struct dentry	*node;
+ 
+-	as->next_transfer = xfer;
++	root = debugfs_create_dir(as->pdev->dev.bus_id, NULL);
++	if (IS_ERR(root))
++		/* Debugfs not enabled */
++		return;
++	if (!root)
++		/* Debugfs enabled, but failed to create directory */
++		goto err_root;
++
++	node = debugfs_create_file("regs", S_IRUSR, root, as,
++			&atmel_spi_regs_fops);
++	if (!node)
++		goto err;
++	node = debugfs_create_file("queue", S_IRUSR, root, as,
++			&atmel_spi_queue_fops);
++	if (!node)
++		goto err;
++
++	as->debugfs_root = root;
++	return;
++
++err:
++	debugfs_remove_recursive(root);
++err_root:
++	dev_err(&as->pdev->dev, "failed to initialize debugfs\n");
++}
+ 
+-	if (xfer) {
+-		u32	total;
++static void atmel_spi_cleanup_debugfs(struct atmel_spi *as)
++{
++	debugfs_remove_recursive(as->debugfs_root);
++}
+ 
+-		total = len;
+-		atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
+-		as->next_remaining_bytes = total - len;
++#else
++static void atmel_spi_init_debugfs(struct atmel_spi *as)
++{
+ 
+-		spi_writel(as, RNPR, rx_dma);
+-		spi_writel(as, TNPR, tx_dma);
++}
++static void atmel_spi_cleanup_debugfs(struct atmel_spi *as)
++{
+ 
+-		if (msg->spi->bits_per_word > 8)
+-			len >>= 1;
+-		spi_writel(as, RNCR, len);
+-		spi_writel(as, TNCR, len);
++}
++#endif
+ 
+-		dev_dbg(&msg->spi->dev,
+-			"  next xfer %p: len %u tx %p/%08x rx %p/%08x\n",
+-			xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
+-			xfer->rx_buf, xfer->rx_dma);
+-		ieval = SPI_BIT(ENDRX) | SPI_BIT(OVRES);
+-	} else {
+-		spi_writel(as, RNCR, 0);
+-		spi_writel(as, TNCR, 0);
+-		ieval = SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) | SPI_BIT(OVRES);
+-	}
++/*
++ * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby
++ * they assume that spi slave device state will not change on deselect, so
++ * that automagic deselection is OK.  ("NPCSx rises if no data is to be
++ * transmitted")  Not so!  Workaround uses nCSx pins as GPIOs; or newer
++ * controllers have CSAAT and friends.
++ *
++ * Since the CSAAT functionality is a bit weird on newer controllers as
++ * well, we use GPIO to control nCSx pins on all controllers, updating
++ * MR.PCS to avoid confusing the controller.  Using GPIOs also lets us
++ * support active-high chipselects despite the controller's belief that
++ * only active-low devices/systems exists.
++ *
++ * However, at91rm9200 has a second erratum whereby nCS0 doesn't work
++ * right when driven with GPIO.  ("Mode Fault does not allow more than one
++ * Master on Chip Select 0.")  No workaround exists for that ... so for
++ * nCS0 on that chip, we (a) don't use the GPIO, (b) can't support CS_HIGH,
++ * and (c) will trigger that first erratum in some cases.
++ *
++ * TODO: Test if the atmel_spi_is_v2() branch below works on
++ * AT91RM9200 if we use some other register than CSR0. However, don't
++ * do this unconditionally since AP7000 has an errata where the BITS
++ * field in CSR0 overrides all other CSRs.
++ */
+ 
+-	/* REVISIT: We're waiting for ENDRX before we start the next
+-	 * transfer because we need to handle some difficult timing
+-	 * issues otherwise. If we wait for ENDTX in one transfer and
+-	 * then starts waiting for ENDRX in the next, it's difficult
+-	 * to tell the difference between the ENDRX interrupt we're
+-	 * actually waiting for and the ENDRX interrupt of the
+-	 * previous transfer.
+-	 *
+-	 * It should be doable, though. Just not now...
+-	 */
+-	spi_writel(as, IER, ieval);
+-	spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
++static void atmel_spi_set_csr(struct atmel_spi *as,
++		struct spi_device *spi, u32 csr)
++{
++	if (atmel_spi_is_v2())
++		spi_writel(as, CSR0, csr);
++	else
++		spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
+ }
+ 
+-static void atmel_spi_next_message(struct spi_master *master)
++static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
+ {
+-	struct atmel_spi	*as = spi_master_get_devdata(master);
+-	struct spi_message	*msg;
+-	struct spi_device	*spi;
++	struct atmel_spi_device *asd = spi->controller_state;
++	unsigned active = spi->mode & SPI_CS_HIGH;
++
++	if (atmel_spi_is_v2()) {
++		/*
++		 * Always use CSR0. This ensures that the clock
++		 * switches to the correct idle polarity before we
++		 * toggle the CS.
++		 */
++		atmel_spi_set_csr(as, spi, asd->csr);
++		spi_writel(as, MR, SPI_BF(PCS, 0x0e) | SPI_BIT(MODFDIS)
++				| SPI_BIT(MSTR));
++		spi_readl(as, MR);
++		dev_vdbg(&spi->dev, "activate %u%s, csr0: %08x\n",
++				asd->npcs_pin, active ? " (low)" : "",
++				asd->csr);
++
++		gpio_set_value(asd->npcs_pin, active);
++	} else {
++		u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0;
++		int i;
++		u32 mr;
++		u32 csr;
++
++		/* Make sure clock polarity is correct */
++		for (i = 0; i < spi->master->num_chipselect; i++) {
++			csr = spi_readl(as, CSR0 + 4 * i);
++			if ((csr ^ cpol) & SPI_BIT(CPOL))
++				spi_writel(as, CSR0 + 4 * i,
++						csr ^ SPI_BIT(CPOL));
++		}
+ 
+-	BUG_ON(as->current_transfer);
++		mr = spi_readl(as, MR);
++		mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr);
++		dev_vdbg(&spi->dev, "activate %u%s, mr: %08x csr: %08x\n",
++				asd->npcs_pin, active ? " (low)" : "",
++				mr, csr);
++		if (spi->chip_select != 0)
++			gpio_set_value(asd->npcs_pin, active);
++		spi_writel(as, MR, mr);
++	}
++}
+ 
+-	msg = list_entry(as->queue.next, struct spi_message, queue);
+-	spi = msg->spi;
++static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
++{
++	struct atmel_spi_device *asd = spi->controller_state;
++	unsigned active = spi->mode & SPI_CS_HIGH;
++	u32 mr;
+ 
+-	dev_dbg(master->dev.parent, "start message %p for %s\n",
+-			msg, spi->dev.bus_id);
++	/* only deactivate *this* device; sometimes transfers to
++	 * another device may be active when this routine is called.
++	 */
++	mr = spi_readl(as, MR);
++	if (~SPI_BFEXT(PCS, mr) & (1 << spi->chip_select)) {
++		mr = SPI_BFINS(PCS, 0xf, mr);
++		spi_writel(as, MR, mr);
++	}
+ 
+-	/* select chip if it's not still active */
+-	if (as->stay) {
+-		if (as->stay != spi) {
+-			cs_deactivate(as, as->stay);
+-			cs_activate(as, spi);
+-		}
+-		as->stay = NULL;
+-	} else
+-		cs_activate(as, spi);
++	dev_vdbg(&spi->dev, "DEactivate %u%s, mr %08x\n",
++			asd->npcs_pin, active ? " (low)" : "",
++			mr);
+ 
+-	atmel_spi_next_xfer(master, msg);
++	if (atmel_spi_is_v2() || spi->chip_select != 0)
++		gpio_set_value(asd->npcs_pin, !active);
+ }
+ 
+ /*
+@@ -338,162 +477,460 @@ atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer)
+ 	return 0;
+ }
+ 
+-static void atmel_spi_dma_unmap_xfer(struct spi_master *master,
++static void atmel_spi_dma_unmap_xfer(struct atmel_spi *as,
+ 				     struct spi_transfer *xfer)
+ {
+ 	if (xfer->tx_dma != INVALID_DMA_ADDRESS)
+-		dma_unmap_single(master->dev.parent, xfer->tx_dma,
++		dma_unmap_single(&as->pdev->dev, xfer->tx_dma,
+ 				 xfer->len, DMA_TO_DEVICE);
+ 	if (xfer->rx_dma != INVALID_DMA_ADDRESS)
+-		dma_unmap_single(master->dev.parent, xfer->rx_dma,
++		dma_unmap_single(&as->pdev->dev, xfer->rx_dma,
+ 				 xfer->len, DMA_FROM_DEVICE);
+ }
+ 
+-static void
+-atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as,
+-		struct spi_message *msg, int status, int stay)
++static void atmel_spi_dma_unmap_msg(struct atmel_spi *as, struct spi_message *msg)
+ {
+-	if (!stay || status < 0)
+-		cs_deactivate(as, msg->spi);
+-	else
+-		as->stay = msg->spi;
+-
+-	list_del(&msg->queue);
+-	msg->status = status;
+-
+-	dev_dbg(master->dev.parent,
+-		"xfer complete: %u bytes transferred\n",
+-		msg->actual_length);
++	struct spi_transfer	*xfer;
+ 
+-	spin_unlock(&as->lock);
+-	msg->complete(msg->context);
+-	spin_lock(&as->lock);
++	if (!msg->is_dma_mapped)
++		list_for_each_entry(xfer, &msg->transfers, transfer_list)
++			atmel_spi_dma_unmap_xfer(as, xfer);
++}
+ 
+-	as->current_transfer = NULL;
+-	as->next_transfer = NULL;
++static void atmel_spi_handle_error(struct atmel_spi *as,
++		struct spi_message *msg, int err)
++{
++	unsigned int timeout;
++
++	/* Drain the buffers so that the hardware is ready for a new message */
++	for (timeout = 1000; timeout; timeout--)
++		if (spi_readl(as, SR) & SPI_BIT(TXEMPTY))
++			break;
++	if (!timeout)
++		dev_warn(&msg->spi->dev,
++			 "timeout waiting for TXEMPTY");
++	while (spi_readl(as, SR) & SPI_BIT(RDRF))
++		spi_readl(as, RDR);
++
++	/* Clear any overrun happening while cleaning up */
++	spi_readl(as, SR);
+ 
+-	/* continue if needed */
+-	if (list_empty(&as->queue) || as->stopping)
+-		spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
+-	else
+-		atmel_spi_next_message(master);
++	msg->status = err;
++	as->error = 0;
+ }
+ 
+-static irqreturn_t
+-atmel_spi_interrupt(int irq, void *dev_id)
++#ifdef CONFIG_SPI_ATMEL_HAVE_PDC
++static int atmel_spi_wait_idle(struct atmel_spi *as, struct spi_message *msg)
+ {
+-	struct spi_master	*master = dev_id;
+-	struct atmel_spi	*as = spi_master_get_devdata(master);
+-	struct spi_message	*msg;
+-	struct spi_transfer	*xfer;
+-	u32			status, pending, imr;
+-	int			ret = IRQ_NONE;
++	int err;
+ 
+-	spin_lock(&as->lock);
++	wait_event(as->wait, as->pending == 0);
++	err = as->error;
++	if (err) {
++		dev_warn(&msg->spi->dev,
++				"transfer error %d (%u/%u remaining)\n",
++				err, spi_readl(as, TCR), spi_readl(as, RCR));
++
++		spi_writel(as, TNCR, 0);
++		spi_writel(as, RNCR, 0);
++		spi_writel(as, TCR, 0);
++		spi_writel(as, RCR, 0);
+ 
+-	xfer = as->current_transfer;
+-	msg = list_entry(as->queue.next, struct spi_message, queue);
++		atmel_spi_handle_error(as, msg, err);
+ 
+-	imr = spi_readl(as, IMR);
+-	status = spi_readl(as, SR);
+-	pending = status & imr;
++		return err;
++	}
+ 
+-	if (pending & SPI_BIT(OVRES)) {
+-		int timeout;
++	msg->actual_length += as->pending_bytes;
++	as->pending_bytes = 0;
++
++	dev_vdbg(&msg->spi->dev, "controller idle, xfered so far: %u\n",
++			msg->actual_length);
++
++	return 0;
++}
++
++static int atmel_spi_submit_xfer(struct atmel_spi *as, struct spi_device *spi,
++		struct spi_message *msg, struct spi_transfer *xfer)
++{
++	unsigned int	bits = xfer->bits_per_word;
++	unsigned int	speed_hz = xfer->speed_hz;
++	unsigned int	submitted = 0;
++	dma_addr_t	rx_dma;
++	dma_addr_t	tx_dma;
++
++	dev_vdbg(&spi->dev, "submit_xfer len %u rx %p tx %p\n",
++			xfer->len, xfer->rx_buf, xfer->tx_buf);
++	dev_vdbg(&spi->dev, "  csc %u bpw %u delay %u speed %u\n",
++			xfer->cs_change, xfer->bits_per_word,
++			xfer->delay_usecs, xfer->speed_hz);
++
++	if (bits || speed_hz) {
++		struct atmel_spi_device *asd;
++		u32 csr;
++
++		if (atmel_spi_wait_idle(as, msg))
++			return 0;
++
++		asd = spi->controller_state;
++		csr = asd->csr;
++
++		if (bits)
++			csr = SPI_BFINS(BITS, csr, bits - 8);
++		if (speed_hz) {
++			u32 scbr = DIV_ROUND_UP(as->base_hz, speed_hz);
++			csr = SPI_BFINS(SCBR, csr, scbr);
++		}
++
++		atmel_spi_set_csr(as, spi, csr);
++	}
+ 
+-		ret = IRQ_HANDLED;
++	if (!bits)
++		bits = spi->bits_per_word;
+ 
+-		spi_writel(as, IDR, (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX)
+-				     | SPI_BIT(OVRES)));
++	/* PDC stuff starts here */
++	while (submitted < xfer->len) {
++		unsigned long len;
++
++		wait_event(as->wait, as->pending < 2);
+ 
+ 		/*
+-		 * When we get an overrun, we disregard the current
+-		 * transfer. Data will not be copied back from any
+-		 * bounce buffer and msg->actual_len will not be
+-		 * updated with the last xfer.
+-		 *
+-		 * We will also not process any remaning transfers in
+-		 * the message.
+-		 *
+-		 * First, stop the transfer and unmap the DMA buffers.
++		 * This gives the RX side a slight advantage, making
++		 * overruns less likely.
+ 		 */
+-		spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
+-		if (!msg->is_dma_mapped)
+-			atmel_spi_dma_unmap_xfer(master, xfer);
++		spi_writel(as, PTCR, SPI_BIT(TXTDIS));
++
++		len = xfer->len - submitted;
++		if (xfer->rx_buf) {
++			rx_dma = xfer->rx_dma + submitted;
++		} else {
++			rx_dma = as->buffer_dma;
++			len = min(len, BUFFER_SIZE);
++		}
++		if (xfer->tx_buf) {
++			tx_dma = xfer->tx_dma + submitted;
++		} else {
++			tx_dma = as->buffer_dma;
++			len = min(len, BUFFER_SIZE);
++			memset(as->buffer, 0, len);
++		}
++
++		submitted += len;
++		if (bits > 8)
++			len >>= 1;
++
++		spin_lock_irq(&as->lock);
++		if (as->error) {
++			spin_unlock_irq(&as->lock);
++			atmel_spi_wait_idle(as, msg);
++			return 0;
++		}
++
++		spi_writel(as, RNPR, rx_dma);
++		spi_writel(as, RNCR, len);
++		spi_writel(as, TNPR, tx_dma);
++		spi_writel(as, TNCR, len);
++		spi_writel(as, IER, SPI_BIT(RXBUFF) | SPI_BIT(ENDRX)
++				| SPI_BIT(OVRES));
++		spi_writel(as, PTCR, SPI_BIT(RXTEN) | SPI_BIT(TXTEN));
++		as->pending++;
++		spin_unlock_irq(&as->lock);
++	}
++
++	as->pending_bytes += submitted;
+ 
+-		/* REVISIT: udelay in irq is unfriendly */
++	if (xfer->delay_usecs || xfer->cs_change || xfer->bits_per_word
++			|| xfer->speed_hz) {
++		struct atmel_spi_device	*asd = spi->controller_state;
++		int			err;
++
++		err = atmel_spi_wait_idle(as, msg);
+ 		if (xfer->delay_usecs)
+ 			udelay(xfer->delay_usecs);
++		atmel_spi_set_csr(as, spi, asd->csr);
++		if (err)
++			return 0;
+ 
+-		dev_warn(master->dev.parent, "overrun (%u/%u remaining)\n",
+-			 spi_readl(as, TCR), spi_readl(as, RCR));
++		if (xfer->cs_change && !atmel_spi_xfer_is_last(msg, xfer)) {
++			cs_deactivate(as, spi);
++			udelay(1);
++			cs_activate(as, spi);
++		}
++	}
+ 
+-		/*
+-		 * Clean up DMA registers and make sure the data
+-		 * registers are empty.
+-		 */
+-		spi_writel(as, RNCR, 0);
+-		spi_writel(as, TNCR, 0);
+-		spi_writel(as, RCR, 0);
+-		spi_writel(as, TCR, 0);
+-		for (timeout = 1000; timeout; timeout--)
+-			if (spi_readl(as, SR) & SPI_BIT(TXEMPTY))
+-				break;
+-		if (!timeout)
+-			dev_warn(master->dev.parent,
+-				 "timeout waiting for TXEMPTY");
+-		while (spi_readl(as, SR) & SPI_BIT(RDRF))
+-			spi_readl(as, RDR);
++	return xfer->cs_change;
++}
+ 
+-		/* Clear any overrun happening while cleaning up */
+-		spi_readl(as, SR);
++#else /* Use DMA engine framework, not PDC */
+ 
+-		atmel_spi_msg_done(master, as, msg, -EIO, 0);
+-	} else if (pending & (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX))) {
+-		ret = IRQ_HANDLED;
++static void atmel_spi_dma_complete(void *param)
++{
++	struct atmel_spi	*as = param;
+ 
+-		spi_writel(as, IDR, pending);
++	as->pending = 0;
++	as->sg_len = 0;
++	wake_up(&as->wait);
++}
+ 
+-		if (as->current_remaining_bytes == 0) {
+-			msg->actual_length += xfer->len;
+-
+-			if (!msg->is_dma_mapped)
+-				atmel_spi_dma_unmap_xfer(master, xfer);
+-
+-			/* REVISIT: udelay in irq is unfriendly */
+-			if (xfer->delay_usecs)
+-				udelay(xfer->delay_usecs);
+-
+-			if (atmel_spi_xfer_is_last(msg, xfer)) {
+-				/* report completed message */
+-				atmel_spi_msg_done(master, as, msg, 0,
+-						xfer->cs_change);
+-			} else {
+-				if (xfer->cs_change) {
+-					cs_deactivate(as, msg->spi);
+-					udelay(1);
+-					cs_activate(as, msg->spi);
+-				}
++static int atmel_spi_wait_idle(struct atmel_spi *as, struct spi_message *msg)
++{
++	struct dma_chan			*tx_chan = as->tx_chan;
++	struct dma_chan			*rx_chan = as->rx_chan;
++	struct dma_device		*dma = rx_chan->device;
++	struct dma_async_tx_descriptor	*tx_desc;
++	struct dma_async_tx_descriptor	*rx_desc;
++	int				err;
++
++	dev_vdbg(&msg->spi->dev, "wait_idle: sg_len=%u\n", as->sg_len);
++
++	if (!as->sg_len)
++		return 0;
++
++	sg_mark_end(as->tx_sg + (as->sg_len - 1));
++	sg_mark_end(as->rx_sg + (as->sg_len - 1));
++	as->pending = 1;
++	smp_wmb();
++
++	tx_desc = dma->device_prep_slave_sg(tx_chan,
++			as->tx_sg, as->sg_len, DMA_TO_DEVICE,
++			DMA_COMPL_SKIP_SRC_UNMAP | DMA_CTRL_ACK);
++	rx_desc = dma->device_prep_slave_sg(rx_chan,
++			as->rx_sg, as->sg_len, DMA_FROM_DEVICE,
++			DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP
++			| DMA_CTRL_ACK);
++	rx_desc->callback = atmel_spi_dma_complete;
++	rx_desc->callback_param = as;
++	rx_desc->tx_submit(rx_desc);
++	tx_desc->tx_submit(tx_desc);
++	dma->device_issue_pending(rx_chan);
++	dma->device_issue_pending(tx_chan);
++
++	spi_writel(as, IER, SPI_BIT(OVRES));
++	wait_event(as->wait, !as->pending);
++	spi_writel(as, IDR, SPI_BIT(OVRES));
++	err = as->error;
++	if (err) {
++		dev_warn(&msg->spi->dev, "transfer error %d\n", err);
++
++		dma->device_terminate_all(tx_chan);
++		dma->device_terminate_all(rx_chan);
++
++		atmel_spi_handle_error(as, msg, err);
++
++		return err;
++	}
++
++	msg->actual_length += as->pending_bytes;
++	as->pending_bytes = 0;
++	sg_init_table(as->rx_sg, MAX_SG_SEGS);
++	sg_init_table(as->tx_sg, MAX_SG_SEGS);
++
++	dev_vdbg(&msg->spi->dev, "controller idle, xfered so far: %u\n",
++			msg->actual_length);
++
++	return 0;
++}
++
++static int atmel_spi_submit_xfer(struct atmel_spi *as, struct spi_device *spi,
++		struct spi_message *msg, struct spi_transfer *xfer)
++{
++	unsigned int	bits = xfer->bits_per_word;
++	unsigned int	speed_hz = xfer->speed_hz;
++	unsigned int	submitted = 0;
++	unsigned int	i;
++
++	dev_vdbg(&spi->dev, "submit_xfer len %u rx %p tx %p\n",
++			xfer->len, xfer->rx_buf, xfer->tx_buf);
++	dev_vdbg(&spi->dev, "  csc %u bpw %u delay %u speed %u\n",
++			xfer->cs_change, xfer->bits_per_word,
++			xfer->delay_usecs, xfer->speed_hz);
++
++	if (bits || speed_hz) {
++		struct atmel_spi_device *asd;
++		u32 csr;
++
++		if (atmel_spi_wait_idle(as, msg))
++			return 0;
++
++		asd = spi->controller_state;
++		csr = asd->csr;
++
++		if (bits)
++			csr = SPI_BFINS(BITS, csr, bits - 8);
++		if (speed_hz) {
++			u32 scbr = DIV_ROUND_UP(as->base_hz, speed_hz);
++			csr = SPI_BFINS(SCBR, csr, scbr);
++		}
++
++		atmel_spi_set_csr(as, spi, csr);
++	}
++
++	if (!bits)
++		bits = spi->bits_per_word;
++
++	i = as->sg_len;
++	while (submitted < xfer->len) {
++		unsigned long len;
++
++		if (i == MAX_SG_SEGS) {
++			if (atmel_spi_wait_idle(as, msg))
++				return 0;
++			i = 0;
++		}
++
++		len = xfer->len - submitted;
++		if (!xfer->rx_buf || !xfer->tx_buf)
++			len = min(len, BUFFER_SIZE);
++
++		if (xfer->rx_buf) {
++			sg_set_buf(&as->rx_sg[i], xfer->rx_buf + submitted, len);
++			as->rx_sg[i].dma_address = xfer->rx_dma + submitted;
++		} else {
++			sg_set_buf(&as->rx_sg[i], as->buffer, len);
++			as->rx_sg[i].dma_address = as->buffer_dma;
++		}
++		if (xfer->tx_buf) {
++			sg_set_buf(&as->tx_sg[i], xfer->tx_buf + submitted, len);
++			as->tx_sg[i].dma_address = xfer->tx_dma + submitted;
++		} else {
++			sg_set_buf(&as->tx_sg[i], as->buffer, len);
++			as->tx_sg[i].dma_address = as->buffer_dma;
++			memset(as->buffer, 0, len);
++		}
+ 
+-				/*
+-				 * Not done yet. Submit the next transfer.
+-				 *
+-				 * FIXME handle protocol options for xfer
+-				 */
+-				atmel_spi_next_xfer(master, msg);
++		submitted += len;
++		as->sg_len = ++i;
++	}
++
++	as->pending_bytes += submitted;
++
++	if (xfer->delay_usecs || xfer->cs_change || xfer->bits_per_word
++			|| xfer->speed_hz) {
++		struct atmel_spi_device	*asd = spi->controller_state;
++		int			err;
++
++		err = atmel_spi_wait_idle(as, msg);
++		if (xfer->delay_usecs)
++			udelay(xfer->delay_usecs);
++		atmel_spi_set_csr(as, spi, asd->csr);
++		if (err)
++			return 0;
++
++		if (xfer->cs_change && !atmel_spi_xfer_is_last(msg, xfer)) {
++			cs_deactivate(as, spi);
++			udelay(1);
++			cs_activate(as, spi);
++		}
++	}
++
++	return xfer->cs_change;
++}
++
++#endif /* PDC vs. DMA engine */
++
++static void atmel_spi_work(struct work_struct *work)
++{
++	struct atmel_spi	*as;
++
++	as = container_of(work, struct atmel_spi, work);
++
++	spin_lock_irq(&as->lock);
++	while (!list_empty(&as->queue)) {
++		struct spi_message	*msg;
++		struct spi_transfer	*xfer;
++		struct spi_device	*spi;
++		int			cs_change = 0;
++
++		if (as->stopping)
++			break;
++
++		msg = list_entry(as->queue.next, struct spi_message, queue);
++		spin_unlock_irq(&as->lock);
++
++		spi = msg->spi;
++
++		if (as->stay) {
++			if (as->stay != spi) {
++				cs_deactivate(as, as->stay);
++				cs_activate(as, spi);
+ 			}
++			as->stay = NULL;
+ 		} else {
+-			/*
+-			 * Keep going, we still have data to send in
+-			 * the current transfer.
+-			 */
+-			atmel_spi_next_xfer(master, msg);
++			cs_activate(as, spi);
++		}
++
++#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
++		sg_init_table(as->rx_sg, MAX_SG_SEGS);
++		sg_init_table(as->tx_sg, MAX_SG_SEGS);
++#endif
++
++		list_for_each_entry(xfer, &msg->transfers, transfer_list) {
++			if (msg->status != -EINPROGRESS)
++				break;
++			cs_change = atmel_spi_submit_xfer(as, spi, msg, xfer);
++		}
++
++		if (msg->status == -EINPROGRESS) {
++			if (atmel_spi_wait_idle(as, msg))
++				cs_change = 1;
++			else
++				msg->status = 0;
+ 		}
++		if (!cs_change)
++			cs_deactivate(as, spi);
++		else
++			as->stay = spi;
++
++		atmel_spi_dma_unmap_msg(as, msg);
++
++		msg->complete(msg->context);
++		spin_lock_irq(&as->lock);
++		list_del(&msg->queue);
++	}
++	spin_unlock_irq(&as->lock);
++}
++
++static irqreturn_t atmel_spi_interrupt(int irq, void *dev_id)
++{
++	struct atmel_spi	*as = dev_id;
++	u32			status;
++	u32			mask;
++	u32			pending;
++
++	spin_lock(&as->lock);
++
++	status = spi_readl(as, SR);
++	mask = spi_readl(as, IMR);
++	pending = status & mask;
++
++	if (pending & SPI_BIT(OVRES)) {
++#ifdef CONFIG_SPI_ATMEL_HAVE_PDC
++		spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
++#endif
++		spi_writel(as, IDR, ~0UL);
++		as->error = -EIO;
++		as->pending = 0;
++#ifdef CONFIG_SPI_ATMEL_HAVE_PDC
++	} else if (pending & SPI_BIT(RXBUFF)) {
++		spi_writel(as, IDR, ~0UL);
++		as->pending = 0;
++	} else if (pending & SPI_BIT(ENDRX)) {
++		spi_writel(as, IDR, SPI_BIT(ENDRX));
++		as->pending--;
++#endif
++	} else {
++		dev_err(&as->pdev->dev,
++			"unexpected interrupt: SR=0x%08x MR=0x%08x\n",
++				status, mask);
++		spi_writel(as, IDR, pending);
+ 	}
+ 
++	spi_readl(as, IMR);
++	wake_up(&as->wait);
++
+ 	spin_unlock(&as->lock);
+ 
+-	return ret;
++	return IRQ_HANDLED;
+ }
+ 
+ /* the spi->mode bits understood by this driver: */
+@@ -502,6 +939,7 @@ atmel_spi_interrupt(int irq, void *dev_id)
+ static int atmel_spi_setup(struct spi_device *spi)
+ {
+ 	struct atmel_spi	*as;
++	struct atmel_spi_device	*asd;
+ 	u32			scbr, csr;
+ 	unsigned int		bits = spi->bits_per_word;
+ 	unsigned long		bus_hz;
+@@ -536,21 +974,14 @@ static int atmel_spi_setup(struct spi_device *spi)
+ 	}
+ 
+ 	/* see notes above re chipselect */
+-	if (cpu_is_at91rm9200()
++	if (!atmel_spi_is_v2()
+ 			&& spi->chip_select == 0
+ 			&& (spi->mode & SPI_CS_HIGH)) {
+ 		dev_dbg(&spi->dev, "setup: can't be active-high\n");
+ 		return -EINVAL;
+ 	}
+ 
+-	/*
+-	 * Pre-new_1 chips start out at half the peripheral
+-	 * bus speed.
+-	 */
+-	bus_hz = clk_get_rate(as->clk);
+-	if (!as->new_1)
+-		bus_hz /= 2;
+-
++	bus_hz = as->base_hz;
+ 	if (spi->max_speed_hz) {
+ 		/*
+ 		 * Calculate the lowest divider that satisfies the
+@@ -589,11 +1020,20 @@ static int atmel_spi_setup(struct spi_device *spi)
+ 
+ 	/* chipselect must have been muxed as GPIO (e.g. in board setup) */
+ 	npcs_pin = (unsigned int)spi->controller_data;
+-	if (!spi->controller_state) {
++	asd = spi->controller_state;
++	if (!asd) {
++		asd = kzalloc(sizeof(struct atmel_spi_device), GFP_KERNEL);
++		if (!asd)
++			return -ENOMEM;
++
+ 		ret = gpio_request(npcs_pin, spi->dev.bus_id);
+-		if (ret)
++		if (ret) {
++			kfree(asd);
+ 			return ret;
+-		spi->controller_state = (void *)npcs_pin;
++		}
++
++		asd->npcs_pin = npcs_pin;
++		spi->controller_state = asd;
+ 		gpio_direction_output(npcs_pin, !(spi->mode & SPI_CS_HIGH));
+ 	} else {
+ 		unsigned long		flags;
+@@ -605,11 +1045,14 @@ static int atmel_spi_setup(struct spi_device *spi)
+ 		spin_unlock_irqrestore(&as->lock, flags);
+ 	}
+ 
++	asd->csr = csr;
++
+ 	dev_dbg(&spi->dev,
+ 		"setup: %lu Hz bpw %u mode 0x%x -> csr%d %08x\n",
+ 		bus_hz / scbr, bits, spi->mode, spi->chip_select, csr);
+ 
+-	spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
++	if (!atmel_spi_is_v2())
++		spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
+ 
+ 	return 0;
+ }
+@@ -620,74 +1063,81 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg)
+ 	struct spi_transfer	*xfer;
+ 	unsigned long		flags;
+ 	struct device		*controller = spi->master->dev.parent;
++	int			ret;
+ 
+ 	as = spi_master_get_devdata(spi->master);
+ 
+-	dev_dbg(controller, "new message %p submitted for %s\n",
++	dev_vdbg(controller, "new message %p submitted for %s\n",
+ 			msg, spi->dev.bus_id);
+ 
+ 	if (unlikely(list_empty(&msg->transfers)
+ 			|| !spi->max_speed_hz))
+ 		return -EINVAL;
+ 
+-	if (as->stopping)
+-		return -ESHUTDOWN;
+-
+ 	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ 		if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) {
+ 			dev_dbg(&spi->dev, "missing rx or tx buf\n");
+ 			return -EINVAL;
+ 		}
+ 
+-		/* FIXME implement these protocol options!! */
+-		if (xfer->bits_per_word || xfer->speed_hz) {
+-			dev_dbg(&spi->dev, "no protocol options yet\n");
+-			return -ENOPROTOOPT;
++		if (xfer->bits_per_word && (xfer->bits_per_word < 8
++					|| xfer->bits_per_word > 16)) {
++			dev_dbg(&spi->dev, "unsupported bits_per_word\n");
++			return -EINVAL;
++		}
++		if (xfer->speed_hz) {
++			unsigned long divider;
++			divider = DIV_ROUND_UP(as->base_hz, xfer->speed_hz);
++
++			if (divider > 255) {
++				dev_dbg(&spi->dev, "speed_hz too low\n");
++				return -EINVAL;
++			}
+ 		}
+ 
+ 		/*
+ 		 * DMA map early, for performance (empties dcache ASAP) and
+ 		 * better fault reporting.  This is a DMA-only driver.
+-		 *
+-		 * NOTE that if dma_unmap_single() ever starts to do work on
+-		 * platforms supported by this driver, we would need to clean
+-		 * up mappings for previously-mapped transfers.
+ 		 */
+ 		if (!msg->is_dma_mapped) {
+-			if (atmel_spi_dma_map_xfer(as, xfer) < 0)
++			if (atmel_spi_dma_map_xfer(as, xfer) < 0) {
++				/* Ick */
++				while (xfer->transfer_list.prev != &msg->transfers) {
++					xfer = list_entry(xfer->transfer_list.prev,
++							struct spi_transfer,
++							transfer_list);
++					atmel_spi_dma_unmap_xfer(as, xfer);
++				}
++
+ 				return -ENOMEM;
++			}
+ 		}
+ 	}
+ 
+-#ifdef VERBOSE
+-	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+-		dev_dbg(controller,
+-			"  xfer %p: len %u tx %p/%08x rx %p/%08x\n",
+-			xfer, xfer->len,
+-			xfer->tx_buf, xfer->tx_dma,
+-			xfer->rx_buf, xfer->rx_dma);
+-	}
+-#endif
+-
+ 	msg->status = -EINPROGRESS;
+ 	msg->actual_length = 0;
+ 
+ 	spin_lock_irqsave(&as->lock, flags);
+-	list_add_tail(&msg->queue, &as->queue);
+-	if (!as->current_transfer)
+-		atmel_spi_next_message(spi->master);
++	if (as->stopping) {
++		ret = -ESHUTDOWN;
++	} else {
++		list_add_tail(&msg->queue, &as->queue);
++		queue_work(as->workqueue, &as->work);
++		ret = 0;
++	}
+ 	spin_unlock_irqrestore(&as->lock, flags);
+ 
+-	return 0;
++	return ret;
+ }
+ 
+ static void atmel_spi_cleanup(struct spi_device *spi)
+ {
+ 	struct atmel_spi	*as = spi_master_get_devdata(spi->master);
++	struct atmel_spi_device	*asd = spi->controller_state;
+ 	unsigned		gpio = (unsigned) spi->controller_data;
+ 	unsigned long		flags;
+ 
+-	if (!spi->controller_state)
++	if (!asd)
+ 		return;
+ 
+ 	spin_lock_irqsave(&as->lock, flags);
+@@ -697,14 +1147,131 @@ static void atmel_spi_cleanup(struct spi_device *spi)
+ 	}
+ 	spin_unlock_irqrestore(&as->lock, flags);
+ 
++	spi->controller_state = NULL;
+ 	gpio_free(gpio);
++	kfree(asd);
++}
++
++static void atmel_spi_stop_queue(struct atmel_spi *as)
++{
++	struct spi_message	*msg;
++
++	/*
++	 * Prevent any new messages from being submitted, cancel any
++	 * submitted but not-yet-started messages, and wait for any
++	 * ongoing messages to complete.
++	 */
++	as->stopping = true;
++	smp_wmb();
++	cancel_work_sync(&as->work);
++
++	/* Terminate anything that was left over */
++	list_for_each_entry(msg, &as->queue, queue) {
++		atmel_spi_dma_unmap_msg(as, msg);
++		msg->status = -ESHUTDOWN;
++		msg->complete(msg->context);
++	}
++}
++
++#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
++static enum dma_state_client atmel_spi_dma_chan_avail(struct atmel_spi *as,
++		struct dma_chan *chan, struct dma_chan **pchan)
++{
++	enum dma_state_client ret = DMA_NAK;
++
++	if (!*pchan) {
++		as->stopping = false;
++		*pchan = chan;
++		ret = DMA_ACK;
++	}
++
++	return ret;
++}
++
++static enum dma_state_client atmel_spi_dma_chan_removed(struct atmel_spi *as,
++		struct dma_chan *chan, struct dma_chan **pchan)
++{
++	enum dma_state_client ret = DMA_NAK;
++
++	if (chan == *pchan) {
++		atmel_spi_stop_queue(as);
++		*pchan = NULL;
++		ret = DMA_ACK;
++	}
++
++	return ret;
+ }
+ 
++static enum dma_state_client atmel_spi_dma_rx_event(struct dma_client *client,
++		struct dma_chan *chan, enum dma_state state)
++{
++	struct atmel_spi	*as;
++	enum dma_state_client	ret = DMA_NAK;
++
++	as = container_of(client, struct atmel_spi, rx_client);
++
++	switch (state) {
++	case DMA_RESOURCE_AVAILABLE:
++		ret = atmel_spi_dma_chan_avail(as, chan, &as->rx_chan);
++		if (ret == DMA_ACK)
++			dev_info(&as->pdev->dev,
++					"Using %s for DMA RX transfers\n",
++					chan->dev.bus_id);
++		break;
++
++	case DMA_RESOURCE_REMOVED:
++		ret = atmel_spi_dma_chan_removed(as, chan, &as->rx_chan);
++		if (ret == DMA_ACK)
++			dev_info(&as->pdev->dev, "Lost %s, queue stopped\n",
++					chan->dev.bus_id);
++		break;
++
++	default:
++		break;
++	}
++
++	return ret;
++}
++
++static enum dma_state_client atmel_spi_dma_tx_event(struct dma_client *client,
++		struct dma_chan *chan, enum dma_state state)
++{
++	struct atmel_spi	*as;
++	enum dma_state_client	ret = DMA_NAK;
++
++	as = container_of(client, struct atmel_spi, tx_client);
++
++	switch (state) {
++	case DMA_RESOURCE_AVAILABLE:
++		ret = atmel_spi_dma_chan_avail(as, chan, &as->tx_chan);
++		if (ret == DMA_ACK)
++			dev_info(&as->pdev->dev,
++					"Using %s for DMA TX transfers\n",
++					chan->dev.bus_id);
++		break;
++
++	case DMA_RESOURCE_REMOVED:
++		ret = atmel_spi_dma_chan_removed(as, chan, &as->tx_chan);
++		if (ret == DMA_ACK)
++			dev_info(&as->pdev->dev, "Lost %s, queue stopped\n",
++					chan->dev.bus_id);
++		break;
++
++	default:
++		break;
++	}
++
++	return ret;
++}
++#endif
++
+ /*-------------------------------------------------------------------------*/
+ 
+ static int __init atmel_spi_probe(struct platform_device *pdev)
+ {
+ 	struct resource		*regs;
++	struct resource		*buf;
++	struct atmel_spi_pdata	*pdata;
+ 	int			irq;
+ 	struct clk		*clk;
+ 	int			ret;
+@@ -719,6 +1286,14 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
+ 	if (irq < 0)
+ 		return irq;
+ 
++	pdata = pdev->dev.platform_data;
++#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
++	if (!pdata) {
++		dev_dbg(&pdev->dev, "no platform data\n");
++		return -ENXIO;
++	}
++#endif
++
+ 	clk = clk_get(&pdev->dev, "spi_clk");
+ 	if (IS_ERR(clk))
+ 		return PTR_ERR(clk);
+@@ -738,31 +1313,65 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
+ 
+ 	as = spi_master_get_devdata(master);
+ 
+-	/*
+-	 * Scratch buffer is used for throwaway rx and tx data.
+-	 * It's coherent to minimize dcache pollution.
+-	 */
+-	as->buffer = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE,
+-					&as->buffer_dma, GFP_KERNEL);
+-	if (!as->buffer)
+-		goto out_free;
++	buf = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++	if (buf) {
++		as->buffer_dma = buf->start;
++		as->buffer_size
++			= rounddown_pow_of_two(buf->end - buf->start + 1);
++		if (as->buffer_size) {
++			as->buffer = (void __force *)ioremap(buf->start,
++					as->buffer_size);
++			if (as->buffer)
++				as->always_bounce = true;
++		}
++	}
++
++	if (!as->buffer) {
++		/*
++		 * Scratch buffer is used for throwaway rx and tx data.
++		 * It's coherent to minimize dcache pollution.
++		 */
++		as->buffer = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE,
++						&as->buffer_dma, GFP_KERNEL);
++		if (!as->buffer)
++			goto out_free;
++	}
+ 
+ 	spin_lock_init(&as->lock);
++	init_waitqueue_head(&as->wait);
+ 	INIT_LIST_HEAD(&as->queue);
++	INIT_WORK(&as->work, atmel_spi_work);
+ 	as->pdev = pdev;
++	as->clk = clk;
+ 	as->regs = ioremap(regs->start, (regs->end - regs->start) + 1);
+ 	if (!as->regs)
+ 		goto out_free_buffer;
+-	as->irq = irq;
+-	as->clk = clk;
+-	if (!cpu_is_at91rm9200())
+-		as->new_1 = 1;
+ 
+-	ret = request_irq(irq, atmel_spi_interrupt, 0,
+-			pdev->dev.bus_id, master);
++	ret = request_irq(irq, atmel_spi_interrupt, 0, pdev->dev.bus_id, as);
+ 	if (ret)
+ 		goto out_unmap_regs;
+ 
++	as->workqueue = create_singlethread_workqueue(pdev->dev.bus_id);
++	if (!as->workqueue)
++		goto out_free_irq;
++
++#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
++	as->rx_client.event_callback = atmel_spi_dma_rx_event;
++	dma_cap_set(DMA_SLAVE, as->rx_client.cap_mask);
++	as->rx_client.slave = pdata->rx_dma_slave;
++	pdata->rx_dma_slave->rx_reg = regs->start + SPI_RDR + 3;
++
++	as->tx_client.event_callback = atmel_spi_dma_tx_event;
++	dma_cap_set(DMA_SLAVE, as->tx_client.cap_mask);
++	as->tx_client.slave = pdata->tx_dma_slave;
++	pdata->tx_dma_slave->tx_reg = regs->start + SPI_TDR + 3;
++
++	dma_async_client_register(&as->rx_client);
++	dma_async_client_register(&as->tx_client);
++	dma_async_client_chan_request(&as->rx_client);
++	dma_async_client_chan_request(&as->tx_client);
++#endif
++
+ 	/* Initialize the hardware */
+ 	clk_enable(clk);
+ 	spi_writel(as, CR, SPI_BIT(SWRST));
+@@ -770,9 +1379,19 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
+ 	spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
+ 	spi_writel(as, CR, SPI_BIT(SPIEN));
+ 
++	/* v1 chips start out at half the peripheral bus speed. */
++	as->base_hz = clk_get_rate(clk);
++	if (!atmel_spi_is_v2())
++		as->base_hz /= 2;
++
+ 	/* go! */
+ 	dev_info(&pdev->dev, "Atmel SPI Controller at 0x%08lx (irq %d)\n",
+ 			(unsigned long)regs->start, irq);
++	if (as->always_bounce)
++		dev_info(&pdev->dev, "Using bounce buffer at 0x%08x len %zu\n",
++				as->buffer_dma, as->buffer_size);
++
++	atmel_spi_init_debugfs(as);
+ 
+ 	ret = spi_register_master(master);
+ 	if (ret)
+@@ -781,9 +1400,16 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
+ 	return 0;
+ 
+ out_reset_hw:
++	atmel_spi_cleanup_debugfs(as);
+ 	spi_writel(as, CR, SPI_BIT(SWRST));
+ 	clk_disable(clk);
+-	free_irq(irq, master);
++#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
++	dma_async_client_unregister(&as->tx_client);
++	dma_async_client_unregister(&as->rx_client);
++#endif
++	destroy_workqueue(as->workqueue);
++out_free_irq:
++	free_irq(irq, as);
+ out_unmap_regs:
+ 	iounmap(as->regs);
+ out_free_buffer:
+@@ -799,33 +1425,34 @@ static int __exit atmel_spi_remove(struct platform_device *pdev)
+ {
+ 	struct spi_master	*master = platform_get_drvdata(pdev);
+ 	struct atmel_spi	*as = spi_master_get_devdata(master);
+-	struct spi_message	*msg;
+ 
+-	/* reset the hardware and block queue progress */
+-	spin_lock_irq(&as->lock);
+-	as->stopping = 1;
+-	spi_writel(as, CR, SPI_BIT(SWRST));
+-	spi_readl(as, SR);
+-	spin_unlock_irq(&as->lock);
++	/* Stop the queue */
++	atmel_spi_stop_queue(as);
+ 
+-	/* Terminate remaining queued transfers */
+-	list_for_each_entry(msg, &as->queue, queue) {
+-		/* REVISIT unmapping the dma is a NOP on ARM and AVR32
+-		 * but we shouldn't depend on that...
+-		 */
+-		msg->status = -ESHUTDOWN;
+-		msg->complete(msg->context);
+-	}
++	atmel_spi_cleanup_debugfs(as);
+ 
+-	dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
+-			as->buffer_dma);
++	/* Shut down the hardware */
++	spi_writel(as, CR, SPI_BIT(SWRST));
++	spi_readl(as, SR);
+ 
++	/* Clean up */
++	spi_unregister_master(master);
++	free_irq(platform_get_irq(pdev, 0), as);
++#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
++	dma_async_client_unregister(&as->tx_client);
++	dma_async_client_unregister(&as->rx_client);
++#endif
++	destroy_workqueue(as->workqueue);
++	if (as->always_bounce)
++		iounmap((void __iomem __force *)as->buffer);
++	else
++		dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
++				as->buffer_dma);
++	iounmap(as->regs);
+ 	clk_disable(as->clk);
+ 	clk_put(as->clk);
+-	free_irq(as->irq, master);
+-	iounmap(as->regs);
+ 
+-	spi_unregister_master(master);
++	spi_master_put(master);
+ 
+ 	return 0;
+ }
+@@ -837,7 +1464,9 @@ static int atmel_spi_suspend(struct platform_device *pdev, pm_message_t mesg)
+ 	struct spi_master	*master = platform_get_drvdata(pdev);
+ 	struct atmel_spi	*as = spi_master_get_devdata(master);
+ 
++	atmel_spi_stop_queue(as);
+ 	clk_disable(as->clk);
++
+ 	return 0;
+ }
+ 
+@@ -847,6 +1476,9 @@ static int atmel_spi_resume(struct platform_device *pdev)
+ 	struct atmel_spi	*as = spi_master_get_devdata(master);
+ 
+ 	clk_enable(as->clk);
++	as->stopping = false;
++	smp_wmb();
++
+ 	return 0;
+ }
+ 
+@@ -868,7 +1500,12 @@ static struct platform_driver atmel_spi_driver = {
+ 
+ static int __init atmel_spi_init(void)
+ {
+-	return platform_driver_probe(&atmel_spi_driver, atmel_spi_probe);
++	int ret;
++
++	ret = platform_driver_probe(&atmel_spi_driver, atmel_spi_probe);
++	if (ret)
++		pr_notice("atmel_spi probe failed: %d\n", ret);
++	return ret;
+ }
+ module_init(atmel_spi_init);
+ 
+@@ -879,6 +1516,6 @@ static void __exit atmel_spi_exit(void)
+ module_exit(atmel_spi_exit);
+ 
+ MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver");
+-MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+-MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>");
++MODULE_LICENSE("GPL v2");
+ MODULE_ALIAS("platform:atmel_spi");
+diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
+index bcefbdd..6882a7d 100644
+--- a/drivers/usb/Kconfig
++++ b/drivers/usb/Kconfig
+@@ -37,6 +37,8 @@ config USB_ARCH_HAS_OHCI
+ 	default y if ARCH_EP93XX
+ 	default y if ARCH_AT91
+ 	default y if ARCH_PNX4008
++	# AVR32
++	default y if AVR32
+ 	# PPC:
+ 	default y if STB03xxx
+ 	default y if PPC_MPC52xx
+@@ -55,6 +57,7 @@ config USB_ARCH_HAS_EHCI
+ 	default y if PPC_83xx
+ 	default y if SOC_AU1200
+ 	default y if ARCH_IXP4XX
++	default y if AVR32
+ 	default PCI
+ 
+ # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
+diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
+index 228797e..8c48773 100644
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -73,12 +73,12 @@ config USB_EHCI_TT_NEWSCHED
+ 
+ config USB_EHCI_BIG_ENDIAN_MMIO
+ 	bool
+-	depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX)
++	depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX || AVR32)
+ 	default y
+ 
+ config USB_EHCI_BIG_ENDIAN_DESC
+ 	bool
+-	depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
++	depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || AVR32)
+ 	default y
+ 
+ config USB_EHCI_FSL
+@@ -208,17 +208,19 @@ config USB_OHCI_HCD_SSB
+ config USB_OHCI_BIG_ENDIAN_DESC
+ 	bool
+ 	depends on USB_OHCI_HCD
++	default y if AVR32
+ 	default n
+ 
+ config USB_OHCI_BIG_ENDIAN_MMIO
+ 	bool
+ 	depends on USB_OHCI_HCD
++	default y if AVR32
+ 	default n
+ 
+ config USB_OHCI_LITTLE_ENDIAN
+ 	bool
+ 	depends on USB_OHCI_HCD
+-	default n if STB03xxx || PPC_MPC52xx
++	default n if STB03xxx || PPC_MPC52xx || AVR32
+ 	default y
+ 
+ config USB_UHCI_HCD
+diff --git a/drivers/usb/host/ehci-avr32.c b/drivers/usb/host/ehci-avr32.c
+new file mode 100644
+index 0000000..7cd0591
+--- /dev/null
++++ b/drivers/usb/host/ehci-avr32.c
+@@ -0,0 +1,213 @@
++/*
++ * AVR32 EHCI bus and power management glue
++ *
++ * Copyright (C) 2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/ioport.h>
++#include <linux/platform_device.h>
++
++static struct clk	*utmi_clk;
++static struct clk	*hclk;
++
++static void ehci_avr32_start_clocks(struct device *dev)
++{
++	dev_vdbg(dev, "starting clocks...\n");
++
++	clk_enable(utmi_clk);
++	clk_enable(hclk);
++}
++
++static void ehci_avr32_stop_clocks(struct device *dev)
++{
++	dev_vdbg(dev, "stopping clocks...\n");
++
++	clk_disable(hclk);
++	clk_disable(utmi_clk);
++}
++
++static int ehci_avr32_setup(struct usb_hcd *hcd)
++{
++	struct device	*dev = hcd->self.controller;
++	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
++	int		ret;
++
++	ehci_avr32_start_clocks(dev);
++
++	ehci->caps = hcd->regs;
++	ehci->regs = hcd->regs
++		+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
++	dbg_hcs_params(ehci, "reset");
++	dbg_hcc_params(ehci, "reset");
++
++	/* cache this readonly data; minimize chip reads */
++	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
++
++	ret = ehci_halt(ehci);
++	if (ret)
++		goto err;
++
++	/* data structure init */
++	ret = ehci_init(hcd);
++	if (ret)
++		goto err;
++
++	ehci->sbrn = 0x20;
++	ehci_port_power(ehci, 0);
++
++	return 0;
++
++err:
++	ehci_avr32_stop_clocks(dev);
++	return ret;
++}
++
++static void ehci_avr32_shutdown(struct usb_hcd *hcd)
++{
++	ehci_shutdown(hcd);
++	ehci_avr32_stop_clocks(hcd->self.controller);
++}
++
++static const struct hc_driver ehci_avr32_hc_driver = {
++	.description		= hcd_name,
++	.product_desc		= "AVR32 USBH (EHCI)",
++	.hcd_priv_size		= sizeof(struct ehci_hcd),
++
++	.irq			= ehci_irq,
++	.flags			= HCD_MEMORY | HCD_USB2,
++
++	.reset			= ehci_avr32_setup,
++	.start			= ehci_run,
++	.stop			= ehci_stop,
++	.shutdown		= ehci_avr32_shutdown,
++
++	.urb_enqueue		= ehci_urb_enqueue,
++	.urb_dequeue		= ehci_urb_dequeue,
++	.endpoint_disable	= ehci_endpoint_disable,
++
++	.get_frame_number	= ehci_get_frame,
++
++	.hub_status_data	= ehci_hub_status_data,
++	.hub_control		= ehci_hub_control,
++	.bus_suspend		= ehci_bus_suspend,
++	.bus_resume		= ehci_bus_resume,
++	.relinquish_port	= ehci_relinquish_port,
++	.port_handed_over	= ehci_port_handed_over,
++};
++
++static int ehci_avr32_probe(struct platform_device *pdev)
++{
++	struct resource		*reg_res;
++	struct usb_hcd		*hcd;
++	struct ehci_hcd		*ehci;
++	int			irq;
++	int			ret;
++
++	reg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!reg_res) {
++		dev_dbg(&pdev->dev, "no MMIO resource\n");
++		return -ENXIO;
++	}
++
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0) {
++		dev_dbg(&pdev->dev, "no IRQ resource\n");
++		return -ENXIO;
++	}
++
++	hclk = clk_get(&pdev->dev, "hclk");
++	if (IS_ERR(hclk)) {
++		dev_dbg(&pdev->dev, "no HSB clock\n");
++		return -ENXIO;
++	}
++	utmi_clk = clk_get(&pdev->dev, "utmi_clk");
++	if (IS_ERR(utmi_clk)) {
++		dev_dbg(&pdev->dev, "no UTMI clock\n");
++		ret = -ENXIO;
++		goto err_utmi_clk;
++	}
++
++	if (!request_mem_region(reg_res->start,
++				reg_res->end - reg_res->start + 1,
++				hcd_name)) {
++		dev_dbg(&pdev->dev, "config regs busy\n");
++		ret = -EBUSY;
++		goto err_request_mmio;
++	}
++
++	ret = -ENOMEM;
++
++	hcd = usb_create_hcd(&ehci_avr32_hc_driver, &pdev->dev, "ehci-avr32");
++	if (!hcd) {
++		dev_dbg(&pdev->dev, "failed to create hcd\n");
++		goto err_create_hcd;
++	}
++
++	hcd->rsrc_start = reg_res->start;
++	hcd->rsrc_len = reg_res->end - reg_res->start + 1;
++	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
++	if (!hcd->regs) {
++		dev_dbg(&pdev->dev, "failed to map registers\n");
++		goto err_ioremap;
++	}
++
++	ehci = hcd_to_ehci(hcd);
++	ehci->big_endian_mmio = 1;
++	ehci->big_endian_desc = 1;
++
++	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
++	if (ret)
++		goto err_add_hcd;
++
++	return 0;
++
++err_add_hcd:
++	iounmap(hcd->regs);
++err_ioremap:
++	usb_put_hcd(hcd);
++err_create_hcd:
++	release_mem_region(reg_res->start, reg_res->end - reg_res->start + 1);
++err_request_mmio:
++	clk_put(utmi_clk);
++err_utmi_clk:
++	clk_put(hclk);
++
++	return ret;
++}
++
++static int ehci_avr32_remove(struct platform_device *pdev)
++{
++	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
++
++	platform_set_drvdata(pdev, NULL);
++	usb_remove_hcd(hcd);
++	iounmap(hcd->regs);
++	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++	usb_put_hcd(hcd);
++	clk_put(utmi_clk);
++	clk_put(hclk);
++
++	return 0;
++}
++
++/* FIXME */
++#define ehci_avr32_suspend	NULL
++#define ehci_avr32_resume	NULL
++
++static struct platform_driver ehci_hcd_avr32_driver = {
++	.probe		= ehci_avr32_probe,
++	.remove		= ehci_avr32_remove,
++	.suspend	= ehci_avr32_suspend,
++	.resume		= ehci_avr32_resume,
++	.shutdown	= usb_hcd_platform_shutdown,
++	.driver		= {
++		.name	= "ehci",
++	},
++};
+diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
+index 86e38b0..15e3956 100644
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1015,6 +1015,11 @@ MODULE_LICENSE ("GPL");
+ #define	PLATFORM_DRIVER		ehci_hcd_au1xxx_driver
+ #endif
+ 
++#ifdef CONFIG_AVR32
++#include "ehci-avr32.c"
++#define PLATFORM_DRIVER		ehci_hcd_avr32_driver
++#endif
++
+ #ifdef CONFIG_PPC_PS3
+ #include "ehci-ps3.c"
+ #define	PS3_SYSTEM_BUS_DRIVER	ps3_ehci_driver
+diff --git a/drivers/usb/host/ohci-avr32.c b/drivers/usb/host/ohci-avr32.c
+new file mode 100644
+index 0000000..67f25d6
+--- /dev/null
++++ b/drivers/usb/host/ohci-avr32.c
+@@ -0,0 +1,208 @@
++/*
++ * AVR32 OHCI bus and power management glue
++ *
++ * Copyright (C) 2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/ioport.h>
++#include <linux/platform_device.h>
++
++/* Grr! The core layer doesn't let us keep private data anywhere! */
++static struct clk	*ohci_clk;
++static struct clk	*utmi_clk;
++static struct clk	*hclk;
++
++static void ohci_avr32_start_clocks(struct device *dev)
++{
++	dev_vdbg(dev, "starting clocks...\n");
++
++	clk_enable(ohci_clk);
++	clk_enable(utmi_clk);
++	clk_enable(hclk);
++}
++
++static void ohci_avr32_stop_clocks(struct device *dev)
++{
++	dev_vdbg(dev, "stopping clocks...\n");
++
++	clk_disable(hclk);
++	clk_disable(utmi_clk);
++	clk_disable(ohci_clk);
++}
++
++static int ohci_avr32_start(struct usb_hcd *hcd)
++{
++	struct device	*dev = hcd->self.controller;
++	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
++	int		ret;
++
++	ohci_avr32_start_clocks(dev);
++
++	ret = ohci_init(ohci);
++	if (ret)
++		goto err_ohci_init;
++
++	ret = ohci_run(ohci);
++	if (likely(!ret))
++		return 0;
++
++	ohci_stop(hcd);
++
++err_ohci_init:
++	ohci_avr32_stop_clocks(dev);
++	return ret;
++}
++
++static void ohci_avr32_stop(struct usb_hcd *hcd)
++{
++	ohci_stop(hcd);
++	ohci_avr32_stop_clocks(hcd->self.controller);
++}
++
++static const struct hc_driver ohci_avr32_hc_driver = {
++	.description		= hcd_name,
++	.product_desc		= "AVR32 USBH (OHCI)",
++	.hcd_priv_size		= sizeof(struct ohci_hcd),
++
++	.irq			= ohci_irq,
++	.flags			= HCD_USB11 | HCD_MEMORY,
++
++	.start			= ohci_avr32_start,
++	.stop			= ohci_avr32_stop,
++	.shutdown		= ohci_shutdown,
++
++	.urb_enqueue		= ohci_urb_enqueue,
++	.urb_dequeue		= ohci_urb_dequeue,
++	.endpoint_disable	= ohci_endpoint_disable,
++	.get_frame_number	= ohci_get_frame,
++	.hub_status_data	= ohci_hub_status_data,
++	.hub_control		= ohci_hub_control,
++#ifdef CONFIG_PM
++	.bus_suspend		= ohci_bus_suspend,
++	.bus_resume		= ohci_bus_resume,
++#endif
++	.start_port_reset	= ohci_start_port_reset,
++};
++
++static int ohci_avr32_probe(struct platform_device *pdev)
++{
++	struct resource		*regs;
++	struct usb_hcd		*hcd;
++	int			irq;
++	int			ret;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs) {
++		dev_dbg(&pdev->dev, "no MMIO resource\n");
++		return -ENXIO;
++	}
++
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0) {
++		dev_dbg(&pdev->dev, "no IRQ resource\n");
++		return -ENXIO;
++	}
++
++	hclk = clk_get(&pdev->dev, "hclk");
++	if (IS_ERR(hclk)) {
++		dev_dbg(&pdev->dev, "no HSB clock\n");
++		return -ENXIO;
++	}
++	utmi_clk = clk_get(&pdev->dev, "utmi_clk");
++	if (IS_ERR(utmi_clk)) {
++		dev_dbg(&pdev->dev, "no UTMI clock\n");
++		ret = -ENXIO;
++		goto err_utmi_clk;
++	}
++	ohci_clk = clk_get(&pdev->dev, "ohci_clk");
++	if (IS_ERR(ohci_clk)) {
++		dev_dbg(&pdev->dev, "no OHCI clock\n");
++		ret = -ENXIO;
++		goto err_ohci_clk;
++	}
++
++	if (!request_mem_region(regs->start, regs->end - regs->start + 1,
++				hcd_name)) {
++		dev_dbg(&pdev->dev, "config regs busy\n");
++		ret = -EBUSY;
++		goto err_request_mmio;
++	}
++
++	ret = -ENOMEM;
++	hcd = usb_create_hcd(&ohci_avr32_hc_driver, &pdev->dev, "ohci-avr32");
++	if (!hcd) {
++		dev_dbg(&pdev->dev, "failed to create hcd\n");
++		goto err_create_hcd;
++	}
++
++	hcd->rsrc_start = regs->start;
++	hcd->rsrc_len = regs->end - regs->start + 1;
++	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
++	if (!hcd->regs) {
++		dev_dbg(&pdev->dev, "failed to map registers\n");
++		goto err_ioremap;
++	}
++
++	ohci_hcd_init(hcd_to_ohci(hcd));
++
++	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
++	if (ret)
++		goto err_add_hcd;
++
++	return 0;
++
++err_add_hcd:
++	iounmap(hcd->regs);
++err_ioremap:
++	usb_put_hcd(hcd);
++err_create_hcd:
++	release_mem_region(regs->start, regs->end - regs->start + 1);
++err_request_mmio:
++	clk_put(ohci_clk);
++err_ohci_clk:
++	clk_put(utmi_clk);
++err_utmi_clk:
++	clk_put(hclk);
++
++	return ret;
++}
++
++static int ohci_avr32_remove(struct platform_device *pdev)
++{
++	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
++
++	platform_set_drvdata(pdev, NULL);
++	usb_remove_hcd(hcd);
++	iounmap(hcd->regs);
++	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++	usb_put_hcd(hcd);
++	clk_put(utmi_clk);
++	clk_put(ohci_clk);
++	clk_put(hclk);
++
++	return 0;
++}
++
++/* FIXME */
++#define ohci_avr32_suspend	NULL
++#define ohci_avr32_resume	NULL
++
++static struct platform_driver ohci_hcd_avr32_driver = {
++	.probe		= ohci_avr32_probe,
++	.remove		= ohci_avr32_remove,
++	.shutdown	= usb_hcd_platform_shutdown,
++	.suspend	= ohci_avr32_suspend,
++	.resume		= ohci_avr32_resume,
++	.driver		= {
++		.owner	= THIS_MODULE,
++		.name	= "ohci",
++	},
++};
++MODULE_ALIAS("platform:ohci");
+diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
+index 8bec02c..43bed29 100644
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1045,6 +1045,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER		ohci_hcd_at91_driver
+ #endif
+ 
++#ifdef CONFIG_AVR32
++#include "ohci-avr32.c"
++#define PLATFORM_DRIVER		ohci_hcd_avr32_driver
++#endif
++
+ #ifdef CONFIG_ARCH_PNX4008
+ #include "ohci-pnx4008.c"
+ #define PLATFORM_DRIVER		usb_hcd_pnx4008_driver
+diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
+index faf622e..d77ea5c 100644
+--- a/drivers/usb/host/ohci.h
++++ b/drivers/usb/host/ohci.h
+@@ -654,8 +654,10 @@ static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x)
+  * some big-endian SOC implementations.  Same thing happens with PSW access.
+  */
+ 
+-#ifdef CONFIG_PPC_MPC52xx
++#if defined(CONFIG_PPC_MPC52xx)
+ #define big_endian_frame_no_quirk(ohci)	(ohci->flags & OHCI_QUIRK_FRAME_NO)
++#elif defined(CONFIG_AVR32)
++#define big_endian_frame_no_quirk(ohci)	1
+ #else
+ #define big_endian_frame_no_quirk(ohci)	0
+ #endif
+diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
+index 70d135e..9f8e70b 100644
+--- a/drivers/video/Kconfig
++++ b/drivers/video/Kconfig
+@@ -938,6 +938,15 @@ config FB_ATMEL
+ 	help
+ 	  This enables support for the AT91/AT32 LCD Controller.
+ 
++config FB_ATMEL_MPOP
++	tristate "AT32 MPOP support"
++	depends on FB && AVR32 && FB_ATMEL
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This enables support for the AT32 MPOP module.
++
+ config FB_INTSRAM
+ 	bool "Frame Buffer in internal SRAM"
+ 	depends on FB_ATMEL && ARCH_AT91SAM9261
+diff --git a/drivers/video/Makefile b/drivers/video/Makefile
+index a6b5529..edc0656 100644
+--- a/drivers/video/Makefile
++++ b/drivers/video/Makefile
+@@ -89,6 +89,7 @@ obj-$(CONFIG_FB_SA1100)           += sa1100fb.o
+ obj-$(CONFIG_FB_HIT)              += hitfb.o
+ obj-$(CONFIG_FB_EPSON1355)	  += epson1355fb.o
+ obj-$(CONFIG_FB_ATMEL)		  += atmel_lcdfb.o
++obj-$(CONFIG_FB_ATMEL_MPOP)	  += atmel_mpopfb.o
+ obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
+ obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
+ obj-$(CONFIG_FB_ARMCLCD)	  += amba-clcd.o
+diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
+index 75dac57..993d79e 100644
+--- a/drivers/video/atmel_lcdfb.c
++++ b/drivers/video/atmel_lcdfb.c
+@@ -178,7 +178,7 @@ static void init_contrast(struct atmel_lcdfb_info *sinfo)
+ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
+ 	.type		= FB_TYPE_PACKED_PIXELS,
+ 	.visual		= FB_VISUAL_TRUECOLOR,
+-	.xpanstep	= 0,
++	.xpanstep	= 1,
+ 	.ypanstep	= 1,
+ 	.ywrapstep	= 0,
+ 	.accel		= FB_ACCEL_NONE,
+@@ -239,7 +239,7 @@ static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
+ }
+ 
+ static void atmel_lcdfb_update_dma(struct fb_info *info,
+-			       struct fb_var_screeninfo *var)
++                                   struct fb_var_screeninfo *var)
+ {
+ 	struct atmel_lcdfb_info *sinfo = info->par;
+ 	struct fb_fix_screeninfo *fix = &info->fix;
+@@ -251,6 +251,8 @@ static void atmel_lcdfb_update_dma(struct fb_info *info,
+ 	dma_addr &= ~3UL;
+ 
+ 	/* Set framebuffer DMA base address and pixel offset */
++	dev_dbg(info->device, "%s:\n", __func__);
++        dev_dbg(info->device, "  *setting dma addr: 0x%lx \n", dma_addr); 
+ 	lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
+ 
+ 	atmel_lcdfb_update_dma2d(sinfo, var);
+@@ -482,6 +484,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
+ 	dev_dbg(info->device, "  * resolution: %ux%u (%ux%u virtual)\n",
+ 		 info->var.xres, info->var.yres,
+ 		 info->var.xres_virtual, info->var.yres_virtual);
++	dev_dbg(info->device, "  * bpp:        %u\n", info->var.bits_per_pixel);
+ 
+ 	atmel_lcdfb_stop_nowait(sinfo);
+ 
+@@ -583,7 +586,12 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
+ 	lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
+ 	/* Enable FIFO & DMA errors */
+ 	lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
+-
++        
++        /* !!!HACK for logging end of frame and underruns 
++           when connected to MPOP. */
++        if( info->var.bits_per_pixel == 32 )
++          lcdc_writel(sinfo, ATMEL_LCDC_IER, 0x70);
++        
+ 	/* ...wait for DMA engine to become idle... */
+ 	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
+ 		msleep(10);
+@@ -684,7 +692,7 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
+ }
+ 
+ static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
+-			       struct fb_info *info)
++                                   struct fb_info *info)
+ {
+ 	dev_dbg(info->device, "%s\n", __func__);
+ 
+@@ -816,7 +824,8 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
+ 	info->fix = atmel_lcdfb_fix;
+ 
+ 	/* Enable LCDC Clocks */
+-	if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
++	if (cpu_is_at91sam9261() || cpu_is_at32ap7000()
++			|| cpu_is_at32ap7200()) {
+ 		sinfo->bus_clk = clk_get(dev, "hck1");
+ 		if (IS_ERR(sinfo->bus_clk)) {
+ 			ret = PTR_ERR(sinfo->bus_clk);
+diff --git a/drivers/video/atmel_mpopfb.c b/drivers/video/atmel_mpopfb.c
+new file mode 100644
+index 0000000..0a07f7b
+--- /dev/null
++++ b/drivers/video/atmel_mpopfb.c
+@@ -0,0 +1,1127 @@
++/*
++ *  Driver for AT91/AT32 LCD Controller
++ *
++ *  Copyright (C) 2007 Atmel Corporation
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive for
++ * more details.
++ */
++
++#define DEBUG
++
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/uaccess.h>
++
++#include <mach/board.h>
++#include <mach/cpu.h>
++
++#include <video/atmel_lcdc.h>
++#include <video/atmel_mpop.h>
++
++#define mpop_readl(sinfo, reg)		__raw_readl((sinfo)->mmio+(reg))
++#define mpop_writel(sinfo, reg, val)	__raw_writel((val), (sinfo)->mmio+(reg))
++
++#define	ATMEL_MPOPFB_FBINFO_DEFAULT	(FBINFO_DEFAULT \
++                                         | FBINFO_PARTIAL_PAN_OK        \
++                                         | FBINFO_HWACCEL_XPAN          \
++                                         | FBINFO_HWACCEL_YPAN)
++
++static struct atmel_mpopfb_rgbconv_coeffs atmel_mpop_ycrcb2rgb_coeffs = {
++	.r1 = 298,
++	.r2 = 0,
++	.r3 = 409,
++	.r4 = -56992,
++	.g1 = 298,
++	.g2 = -100,
++	.g3 = -208,
++	.g4 = 34784,
++	.b1 = 298,
++	.b2 = 516,
++	.b3 = 0,
++	.b4 = -70688,
++};
++
++static struct fb_fix_screeninfo atmel_mpopfb_fix __initdata = {
++	.type		= FB_TYPE_PLANES,
++	.visual		= FB_VISUAL_TRUECOLOR,
++	.xpanstep	= 16,
++	.ypanstep	= 1,
++	.ywrapstep	= 1,
++	.accel		= FB_ACCEL_NONE,
++};
++
++static void atmel_mpopfb_update_sar(struct fb_info *info,
++		struct fb_var_screeninfo *var)
++{
++	struct atmel_mpopfb_info *sinfo = info->par;
++	struct fb_fix_screeninfo *fix = &info->fix;
++	u32 y_sar, u_sar, v_sar, o1_sar, o2_sar, cursor_sar, next_sar;
++
++	u32 chroma_xres_virtual;
++	u32 chroma_yres_virtual;
++	u32 chroma_xres;
++	u32 chroma_yres;
++	u32 chroma_xoffset;
++	u32 chroma_yoffset;
++
++	switch (var->bits_per_pixel) {
++	default:
++	case 12:
++		chroma_xres_virtual = var->xres_virtual / 2;
++		chroma_yres_virtual = var->yres_virtual / 2;
++		chroma_xres = var->xres / 2;
++		chroma_yres = var->yres / 2;
++		chroma_xoffset = var->xoffset / 2;
++		chroma_yoffset = var->yoffset / 2;
++		break;
++	case 16:
++		chroma_xres_virtual = var->xres_virtual / 2;
++		chroma_yres_virtual = var->yres_virtual;
++		chroma_xres = var->xres / 2;
++		chroma_yres = var->yres;
++		chroma_xoffset = var->xoffset / 2;
++		chroma_yoffset = var->yoffset;
++		break;
++	case 24:
++		chroma_xres_virtual = var->xres_virtual;
++		chroma_yres_virtual = var->yres_virtual;
++		chroma_xres = var->xres;
++		chroma_yres = var->yres;
++		chroma_xoffset = var->xoffset;
++		chroma_yoffset = var->yoffset;
++		break;
++	}
++
++	/* Setup pointer to YUV planes in YUV framebuffer. */
++	y_sar = fix->smem_start + var->xoffset
++		+ var->yoffset * var->xres_virtual;
++	u_sar = fix->smem_start + var->xres_virtual * var->yres_virtual
++		+ chroma_xoffset + chroma_yoffset * chroma_xres_virtual;
++	v_sar = u_sar + chroma_xres_virtual * chroma_yres_virtual;
++	next_sar = fix->smem_start + var->xres_virtual * var->yres_virtual
++		+ 2 * chroma_xres_virtual * chroma_yres_virtual;
++	o1_sar = next_sar;
++	if (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].enabled)
++		next_sar += sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].xsize
++			* sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].ysize;
++	o2_sar = next_sar;
++	if (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].enabled)
++		next_sar += sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].xsize
++			* sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].ysize;
++	cursor_sar = next_sar;
++
++	if (sinfo->baseimg_info.flip) {
++		/* If we flip we must start with the last line in the frame. */
++		y_sar += var->xres_virtual * (var->yres - 1);
++		u_sar += chroma_xres_virtual * (chroma_yres - 1);
++		v_sar += chroma_xres_virtual * (chroma_yres - 1);
++	}
++
++	dev_dbg(info->device, "%s:\n", __func__);
++	dev_dbg(info->device, "  * y_sar = 0x%x\n", y_sar);
++	dev_dbg(info->device, "  * u_sar = 0x%x\n", u_sar);
++	dev_dbg(info->device, "  * v_sar = 0x%x\n", v_sar);
++	dev_dbg(info->device, "  * o1_sar = 0x%x\n", o1_sar);
++	dev_dbg(info->device, "  * o2_sar = 0x%x\n", o2_sar);
++	dev_dbg(info->device, "  * cursor_sar = 0x%x\n", cursor_sar);
++
++	mpop_writel(sinfo, ATMEL_MPOP_Y_SAR, y_sar);
++	mpop_writel(sinfo, ATMEL_MPOP_U_SAR, u_sar);
++	mpop_writel(sinfo, ATMEL_MPOP_V_SAR, v_sar);
++	mpop_writel(sinfo, ATMEL_MPOP_O1_SAR, o1_sar);
++	mpop_writel(sinfo, ATMEL_MPOP_O2_SAR, o2_sar);
++	mpop_writel(sinfo, ATMEL_MPOP_CURSOR_SAR, cursor_sar);
++}
++
++static void atmel_mpopfb_free_video_memory(struct atmel_mpopfb_info *sinfo)
++{
++	struct fb_info *info = sinfo->info;
++
++	dma_free_writecombine(info->device, info->fix.smem_len,
++			(void __force *)info->screen_base,
++			info->fix.smem_start);
++}
++
++/**
++ *	atmel_mpopfb_alloc_video_memory - Allocate framebuffer memory
++ *	@sinfo: the frame buffer to allocate memory for
++ */
++static int atmel_mpopfb_alloc_video_memory(struct atmel_mpopfb_info *sinfo)
++{
++	struct fb_info *info = sinfo->info;
++	struct fb_var_screeninfo *var = &info->var;
++
++	info->fix.smem_len = (var->xres_virtual * var->yres_virtual
++			* ((var->bits_per_pixel + 7) / 8));
++
++	info->screen_base
++		= (void __iomem __force *)dma_alloc_writecombine(info->device,
++				info->fix.smem_len,
++				(dma_addr_t *)&info->fix.smem_start,
++				GFP_KERNEL);
++
++	if (!info->screen_base)
++		return -ENOMEM;
++
++	return 0;
++}
++
++/**
++ *      atmel_mpopfb_check_var - Validates a var passed in.
++ *      @var: frame buffer variable screen structure
++ *      @info: frame buffer structure that represents a single frame buffer
++ *
++ *	Checks to see if the hardware supports the state requested by
++ *	var passed in. This function does not alter the hardware
++ *	state!!!  This means the data stored in struct fb_info and
++ *	struct atmel_mpopfb_info do not change. This includes the var
++ *	inside of struct fb_info.  Do NOT change these. This function
++ *	can be called on its own if we intent to only test a mode and
++ *	not actually set it. The stuff in modedb.c is a example of
++ *	this. If the var passed in is slightly off by what the
++ *	hardware can support then we alter the var PASSED in to what
++ *	we can do. If the hardware doesn't support mode change a
++ *	-EINVAL will be returned by the upper layers. You don't need
++ *	to implement this function then. If you hardware doesn't
++ *	support changing the resolution then this function is not
++ *	needed. In this case the driver would just provide a var that
++ *	represents the static state the screen is in.
++ *
++ *	Returns negative errno on error, or zero on success.
++ */
++static int atmel_mpopfb_check_var(struct fb_var_screeninfo *var,
++		struct fb_info *info)
++{
++	struct device *dev = info->device;
++	struct atmel_mpopfb_info *sinfo = info->par;
++	struct fb_info *lcdc_info = platform_get_drvdata(sinfo->lcdc_pdev);
++
++	dev_dbg(dev, "%s:\n", __func__);
++	dev_dbg(dev, "  resolution: %ux%u\n", var->xres, var->yres);
++	dev_dbg(dev, "  offset: (%u,%u)\n", var->xoffset, var->yoffset);
++	dev_dbg(dev, "  bpp:        %u\n", var->bits_per_pixel);
++
++	/*
++	 *  FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal!
++	 *  as FB_VMODE_SMOOTH_XPAN is only used internally
++	 */
++
++	if (var->vmode & FB_VMODE_CONUPDATE) {
++		var->vmode |= FB_VMODE_YWRAP;
++		var->xoffset = info->var.xoffset;
++		var->yoffset = info->var.yoffset;
++	}
++
++	/* Horizontal size must be a multiple of 16 pixels */
++
++	/*
++	 *  Some very basic checks
++	 */
++	if (!var->xres)
++		var->xres = 1;
++	if (!var->yres)
++		var->yres = 1;
++	if (var->xres > var->xres_virtual)
++		var->xres_virtual = var->xres;
++	if (var->yres > var->yres_virtual)
++		var->yres_virtual = var->yres;
++	if (var->bits_per_pixel > 16)
++		var->bits_per_pixel = 24;
++	else if (var->bits_per_pixel > 12)
++		var->bits_per_pixel = 16;
++	else
++		var->bits_per_pixel = 12;
++
++	/* Horizontal size and offset must be a multiple of 16 pixels */
++	var->xres = (var->xres + 15) & ~15UL;
++	var->xres_virtual = (var->xres_virtual + 15) & ~15UL;
++	var->xoffset = (var->xoffset + 15) & ~15UL;
++
++	if (var->xres_virtual < var->xoffset + var->xres)
++		var->xres_virtual = var->xoffset + var->xres;
++	if (var->yres_virtual < var->yoffset + var->yres)
++		var->yres_virtual = var->yoffset + var->yres;
++
++	/* Check that the scaled image will fit into the LCD display. */
++	if (sinfo->baseimg_info.xsize > lcdc_info->var.xres) {
++		dev_err(dev, "baseimage is wider than screen: %d > %d\n",
++			sinfo->baseimg_info.xsize, lcdc_info->var.xres);
++		return -EINVAL;
++	}
++
++	if (sinfo->baseimg_info.ysize > lcdc_info->var.yres) {
++		dev_err(dev, "baseimage is higher than screen: %d > %d\n",
++			sinfo->baseimg_info.ysize, lcdc_info->var.yres);
++		return -EINVAL;
++	}
++
++	/* Check that it is possible to scale to given size. */
++	if (ATMEL_MPOP_CALC_SCALE(var->xres, sinfo->baseimg_info.xsize) == 0
++			|| (ATMEL_MPOP_CALC_SCALE(var->xres,
++					sinfo->baseimg_info.xsize)
++				> (4 << ATMEL_MPOP_RESIZE_FRAC_BITS))) {
++		dev_err(dev, "cannot scale from width %d to %d Max %s\n",
++			var->xres, sinfo->baseimg_info.xsize,
++			ATMEL_MPOP_CALC_SCALE(var->xres,
++					      sinfo->baseimg_info.xsize)
++			? "downscale factor is 4!"
++			: "upscale factor is 32");
++		return -EINVAL;
++	}
++
++	if (ATMEL_MPOP_CALC_SCALE(var->yres, sinfo->baseimg_info.ysize) == 0
++			|| (ATMEL_MPOP_CALC_SCALE(var->yres,
++					sinfo->baseimg_info.ysize)
++				> (4 << ATMEL_MPOP_RESIZE_FRAC_BITS))) {
++		dev_err(dev, "cannot scale from height %d to %d Max %s\n",
++			var->yres, sinfo->baseimg_info.ysize,
++			ATMEL_MPOP_CALC_SCALE(var->yres,
++					      sinfo->baseimg_info.ysize)
++			? "downscale factor is 4!"
++			: "upscale factor is 32");
++		return -EINVAL;
++	}
++
++	var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
++	var->transp.msb_right = 0;
++	var->transp.offset = var->transp.length = 0;
++
++	switch (var->bits_per_pixel) {
++	case 12:
++	case 16:
++	case 24:
++		var->red.offset = 0;
++		var->green.offset = 8;
++		var->blue.offset = 16;
++		var->red.length = var->green.length = var->blue.length = 8;
++		break;
++	default:
++		dev_err(dev, "color depth %d not supported\n",
++			var->bits_per_pixel);
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static void atmel_mpopfb_start(struct atmel_mpopfb_info *sinfo)
++{
++	if (!sinfo->running) {
++		dev_dbg(sinfo->info->device, "  * Starting MPOP.\n");
++
++		/* Enable all error interrupts. */
++		mpop_writel(sinfo, ATMEL_MPOP_INTEN, 0x7);
++
++		/*
++		 * Enable the MPOP. When the LCD controller starts
++		 * reading from the slave interface it will start
++		 * generating a frame.
++		 */
++		mpop_writel(sinfo, ATMEL_MPOP_CR,
++			    ATMEL_MPOP_CR_EN_MASK
++			    /*| ATMEL_MPOP_CR_OUT_BGR_MASK */ );
++
++		sinfo->running = 1;
++	}
++}
++
++static void atmel_mpopfb_stop(struct atmel_mpopfb_info *sinfo)
++{
++	if (!sinfo->running)
++		/* Not running. Already stopped. */
++		return;
++
++	dev_dbg(sinfo->info->device, "Stopping MPOP.\n");
++
++	/* Disable the MPOP. This will force the MPOP to be reset. */
++	mpop_writel(sinfo, ATMEL_MPOP_CR, 0);
++
++	/* Disable all interrupts. */
++	mpop_writel(sinfo, ATMEL_MPOP_INTDIS, ~0UL);
++
++	/* Looks like we stopped the MPOP... */
++	dev_dbg(sinfo->info->device, "MPOP stopped.\n");
++
++	sinfo->running = 0;
++}
++
++static void atmel_mpopfb_connect_to_lcdc(struct atmel_mpopfb_info *sinfo)
++{
++	struct fb_info *lcdc_info = platform_get_drvdata(sinfo->lcdc_pdev);
++
++	dev_dbg(sinfo->info->device, "Connecting MPOP to LCDC:\n");
++
++	/* Start the mpop if it is not running. */
++	atmel_mpopfb_start(sinfo);
++
++	if (sinfo->connected_to_lcdc)
++		/* Already connected. */
++		return;
++
++	/*
++	 * Set framebuffer pointer in LCDC to point to the slave
++	 * interface of the MPOP.
++	 */
++	dev_dbg(sinfo->info->device, "  * Attaching to LCDC.\n");
++	sinfo->lcdc_old_smem_start = lcdc_info->fix.smem_start;
++	lcdc_info->fix.smem_start = (unsigned long)sinfo->slave_base;
++	sinfo->lcdc_old_bits_per_pixel = lcdc_info->var.bits_per_pixel;
++	lcdc_info->var.bits_per_pixel = 32;
++
++	/* Force the LCDC to change the configuration. */
++	lcdc_info->fbops->fb_set_par(lcdc_info);
++
++	sinfo->connected_to_lcdc = 1;
++}
++
++static void atmel_mpopfb_disconnect_from_lcdc(struct atmel_mpopfb_info *sinfo)
++{
++	struct fb_info *lcdc_info = platform_get_drvdata(sinfo->lcdc_pdev);
++
++	dev_dbg(sinfo->info->device, "Disconnecting MPOP from LCDC:\n");
++
++	if (!sinfo->connected_to_lcdc)
++		/* Already disconnected. */
++		return;
++
++	/* Restore lcdc's old framebuffer pointer and pixel-format. */
++	lcdc_info->fix.smem_start = sinfo->lcdc_old_smem_start;
++	lcdc_info->var.bits_per_pixel = sinfo->lcdc_old_bits_per_pixel;
++
++	/* Force the LCDC to change the configuration. */
++	lcdc_info->fbops->fb_set_par(lcdc_info);
++
++	sinfo->connected_to_lcdc = 0;
++
++	/* We must stop the mpop to reset it. */
++	atmel_mpopfb_stop(sinfo);
++}
++
++static void atmel_mpopfb_put_overlay_palette(struct atmel_mpopfb_info *sinfo,
++		struct atmel_mpopfb_overlay_palette *palette)
++{
++	int i;
++
++	dev_dbg(sinfo->info->device, "Overlay palette = :\n");
++	for (i = 0; i < 256; i++) {
++		dev_dbg(sinfo->info->device, "%d -> 0x%x\n", i,
++			*((int *)&palette->entry[i]));
++		mpop_writel(sinfo, ATMEL_MPOP_PALETTEDATA + 4 * i,
++			    *((int *)&palette->entry[i]));
++	}
++}
++
++static void atmel_mpopfb_get_overlay_palette(struct atmel_mpopfb_info *sinfo,
++		struct atmel_mpopfb_overlay_palette *palette)
++{
++	int i;
++
++	for (i = 0; i < 256; i++)
++		*((int *)&palette->entry[i]) =
++		    mpop_readl(sinfo, ATMEL_MPOP_PALETTEDATA + 4 * i);
++}
++
++static void atmel_mpopfb_put_cursor_palette(struct atmel_mpopfb_info *sinfo,
++		struct atmel_mpopfb_cursor_palette *palette)
++{
++	int i;
++	for (i = 0; i < 4; i++)
++		mpop_writel(sinfo, ATMEL_MPOP_CURSOR_P0 + 4 * i,
++				*((int *)&palette->entry[i]));
++}
++
++static void atmel_mpopfb_get_cursor_palette(struct atmel_mpopfb_info *sinfo,
++		struct atmel_mpopfb_cursor_palette *palette)
++{
++	int i;
++	for (i = 0; i < 4; i++)
++		*((int *)&palette->entry[i])
++			= mpop_readl(sinfo, ATMEL_MPOP_CURSOR_P0 + 4 * i);
++}
++
++/**
++ *      atmel_mpopfb_set_par - Alters the hardware state.
++ *      @info: frame buffer structure that represents a single frame buffer
++ *
++ *	Using the fb_var_screeninfo in fb_info we set the resolution
++ *	of the this particular framebuffer. This function alters the
++ *	par AND the fb_fix_screeninfo stored in fb_info. It doesn't
++ *	not alter var in fb_info since we are using that data. This
++ *	means we depend on the data in var inside fb_info to be
++ *	supported by the hardware.  atmel_lcdfb_check_var is always called
++ *	before atmel_lcdfb_set_par to ensure this.  Again if you can't
++ *	change the resolution you don't need this function.
++ *
++ */
++static int atmel_mpopfb_set_par(struct fb_info *info)
++{
++	struct atmel_mpopfb_info *sinfo = info->par;
++	struct fb_info *lcdc_info = platform_get_drvdata(sinfo->lcdc_pdev);
++	struct fb_var_screeninfo *var = &info->var;
++
++	u32 yuv_format;
++	u32 xscale, yscale;
++
++	dev_dbg(info->device, "%s:\n", __func__);
++	dev_dbg(info->device, "  * resolution: %ux%u (%ux%u virtual)\n",
++			info->var.xres, info->var.yres,
++			info->var.xres_virtual, info->var.yres_virtual);
++	dev_dbg(info->device, "  * offset: (%u,%u)\n",
++			info->var.xoffset, info->var.yoffset);
++	dev_dbg(info->device, "  * bpp: %u\n", info->var.bits_per_pixel);
++
++	/* Setup the output picture size. We must use the size of the lcdcfb. */
++	dev_dbg(info->device, "  * output frame resolution: %ux%u \n",
++			lcdc_info->var.xres, lcdc_info->var.yres);
++	mpop_writel(sinfo, ATMEL_MPOP_DISP_MAX_COORD,
++			((lcdc_info->var.xres - 1) << ATMEL_MPOP_DISP_MAX_COORD_X_OFFSET)
++			| ((lcdc_info->var.yres - 1) << ATMEL_MPOP_DISP_MAX_COORD_Y_OFFSET));
++
++	/* Setup base picture. */
++
++	switch (var->bits_per_pixel) {
++	default:
++	case 12:
++		yuv_format = ATMEL_MPOP_YUVFORMAT_420;
++		break;
++	case 16:
++		yuv_format = ATMEL_MPOP_YUVFORMAT_422;
++		break;
++	case 24:
++		yuv_format = ATMEL_MPOP_YUVFORMAT_444;
++		break;
++	}
++
++	xscale = ATMEL_MPOP_CALC_SCALE(info->var.xres, sinfo->baseimg_info.xsize);
++	yscale = ATMEL_MPOP_CALC_SCALE(info->var.yres, sinfo->baseimg_info.ysize);
++
++	dev_dbg(info->device, "  * baseimg output size = %ux%u \n",
++			sinfo->baseimg_info.xsize, sinfo->baseimg_info.ysize);
++	dev_dbg(info->device, "  * resize scales = %ux%u \n", xscale, yscale);
++	dev_dbg(info->device, "  * yuv format = %u \n", yuv_format);
++	mpop_writel(sinfo, ATMEL_MPOP_YCR,
++			yuv_format << ATMEL_MPOP_YCR_YUVFORMAT_OFFSET
++			| xscale << ATMEL_MPOP_YCR_XRESIZE_OFFSET
++			| yscale << ATMEL_MPOP_YCR_YRESIZE_OFFSET);
++
++	/* Setup conversion coefficients. */
++	mpop_writel(sinfo, ATMEL_MPOP_R2R1,
++			((sinfo->rgbconv_coeffs.r1 << ATMEL_MPOP_R1_OFFSET) & ATMEL_MPOP_R1_MASK)
++			| ((sinfo->rgbconv_coeffs.r2 << ATMEL_MPOP_R2_OFFSET) & ATMEL_MPOP_R2_MASK));
++	mpop_writel(sinfo, ATMEL_MPOP_R4R3,
++			((sinfo->rgbconv_coeffs.r3 << ATMEL_MPOP_R3_OFFSET) & ATMEL_MPOP_R3_MASK)
++			| ((sinfo->rgbconv_coeffs.r4 << ATMEL_MPOP_R4_OFFSET) & ATMEL_MPOP_R4_MASK));
++	mpop_writel(sinfo, ATMEL_MPOP_G2G1,
++			((sinfo->rgbconv_coeffs.g1 << ATMEL_MPOP_G1_OFFSET) & ATMEL_MPOP_G1_MASK)
++			| ((sinfo->rgbconv_coeffs.g2 << ATMEL_MPOP_G2_OFFSET) & ATMEL_MPOP_G2_MASK));
++	mpop_writel(sinfo, ATMEL_MPOP_G4G3,
++			((sinfo->rgbconv_coeffs.g3 << ATMEL_MPOP_G3_OFFSET) & ATMEL_MPOP_G3_MASK)
++			| ((sinfo->rgbconv_coeffs.g4 << ATMEL_MPOP_G4_OFFSET) & ATMEL_MPOP_G4_MASK));
++	mpop_writel(sinfo, ATMEL_MPOP_B2B1,
++			((sinfo->rgbconv_coeffs.b1 << ATMEL_MPOP_B1_OFFSET) & ATMEL_MPOP_B1_MASK)
++			| ((sinfo->rgbconv_coeffs.b2 << ATMEL_MPOP_B2_OFFSET) & ATMEL_MPOP_B2_MASK));
++	mpop_writel(sinfo, ATMEL_MPOP_B4B3,
++			((sinfo->rgbconv_coeffs.b3 << ATMEL_MPOP_B3_OFFSET) & ATMEL_MPOP_B3_MASK)
++			| ((sinfo->rgbconv_coeffs.b4 << ATMEL_MPOP_B4_OFFSET) & ATMEL_MPOP_B4_MASK));
++
++	info->fix.line_length = info->var.xres_virtual;
++	info->fix.visual = FB_VISUAL_TRUECOLOR;
++
++	/* Setup stride. We can flip the image by negating the 
++	   stride, but we must then set the SAR registers to point
++	   to the last line in the image. */
++	if (sinfo->baseimg_info.flip) {
++		dev_dbg(info->device, "  * flip \n");
++		mpop_writel(sinfo, ATMEL_MPOP_STRIDE, -info->var.xres_virtual);
++	} else
++		mpop_writel(sinfo, ATMEL_MPOP_STRIDE, info->var.xres_virtual);
++
++	/* Setup input image size. */
++	mpop_writel(sinfo, ATMEL_MPOP_YUV_MAX_COORD,
++			((info->var.xres - 1) << ATMEL_MPOP_YUV_MAX_COORD_X_OFFSET)
++			| ((info->var.yres - 1) << ATMEL_MPOP_YUV_MAX_COORD_Y_OFFSET));
++
++	/* Setup size and position of output base image after scaling. */
++	mpop_writel(sinfo, ATMEL_MPOP_RGB_SIZE,
++			sinfo->baseimg_info.xsize << ATMEL_MPOP_RGB_SIZE_X_OFFSET
++			| sinfo->baseimg_info.ysize << ATMEL_MPOP_RGB_SIZE_Y_OFFSET);
++
++	mpop_writel(sinfo, ATMEL_MPOP_RGB_POS,
++			(sinfo->baseimg_info.xpos << ATMEL_MPOP_RGB_POS_X_OFFSET)
++			| (sinfo->baseimg_info.ypos << ATMEL_MPOP_RGB_POS_Y_OFFSET));
++
++	dev_dbg(info->device, "  * baseimg pos: (%u,%u) \n",
++			sinfo->baseimg_info.xpos, sinfo->baseimg_info.ypos);
++
++	/* Setup Word Transfer Count. */
++	mpop_writel(sinfo, ATMEL_MPOP_RGB_WTC,
++			DIV_ROUND_UP(info->var.xres * info->var.yres
++				* var->bits_per_pixel, 32));
++
++	/* Set overlay parameters. */
++	mpop_writel(sinfo, ATMEL_MPOP_O1_POS,
++			(sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].xpos << ATMEL_MPOP_O1_POS_O1_POS_X)
++			| (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].ypos << ATMEL_MPOP_O1_POS_O1_POS_Y));
++	mpop_writel(sinfo, ATMEL_MPOP_O1_SIZE,
++			(sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].xsize << ATMEL_MPOP_O1_SIZE_O1_SIZE_X)
++			| (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].ysize << ATMEL_MPOP_O1_SIZE_O1_SIZE_Y));
++	mpop_writel(sinfo, ATMEL_MPOP_O1_WTC,
++			DIV_ROUND_UP(sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].xsize
++			 * sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].ysize, 4));
++
++	mpop_writel(sinfo, ATMEL_MPOP_O2_POS,
++			(sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].xpos << ATMEL_MPOP_O2_POS_O2_POS_X)
++			| (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].ypos << ATMEL_MPOP_O2_POS_O2_POS_Y));
++	mpop_writel(sinfo, ATMEL_MPOP_O2_SIZE,
++			(sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].xsize << ATMEL_MPOP_O2_SIZE_O2_SIZE_X)
++			| (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].ysize << ATMEL_MPOP_O2_SIZE_O2_SIZE_Y));
++	mpop_writel(sinfo, ATMEL_MPOP_O2_WTC,
++			DIV_ROUND_UP(sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].xsize *
++				sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].ysize, 4));
++
++	mpop_writel(sinfo, ATMEL_MPOP_CURSOR_POS,
++			(sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].xpos << ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X)
++			| (sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].ypos << ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y));
++	mpop_writel(sinfo, ATMEL_MPOP_CURSOR_SIZE,
++			(sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].xsize << ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X)
++			| (sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].ysize << ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y));
++	mpop_writel(sinfo, ATMEL_MPOP_CURSOR_WTC,
++			DIV_ROUND_UP(sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].xsize
++				* sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].ysize, 16));
++
++	/* Enable base overlay + any other enabled overlays. */
++	mpop_writel(sinfo, ATMEL_MPOP_OCR, ATMEL_MPOP_OCR_RGBEN_MASK);
++
++	if (sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].enabled)
++		mpop_writel(sinfo, ATMEL_MPOP_OCR,
++				mpop_readl(sinfo, ATMEL_MPOP_OCR)
++				| ATMEL_MPOP_OCR_CURSOREN_MASK);
++	if (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].enabled)
++		mpop_writel(sinfo, ATMEL_MPOP_OCR,
++				mpop_readl(sinfo, ATMEL_MPOP_OCR)
++				| ATMEL_MPOP_OCR_O1EN_MASK);
++	if (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].enabled)
++		mpop_writel(sinfo, ATMEL_MPOP_OCR,
++				mpop_readl(sinfo, ATMEL_MPOP_OCR)
++				| ATMEL_MPOP_OCR_O2EN_MASK);
++
++	/* Set background to black. */
++	mpop_writel(sinfo, ATMEL_MPOP_BGCOLOR, 0);
++
++	/* Setup source address registers */
++	atmel_mpopfb_update_sar(info, &info->var);
++
++	dev_dbg(info->device, "  * DONE\n");
++
++	return 0;
++}
++
++static int atmel_mpopfb_pan_display(struct fb_var_screeninfo *var,
++		struct fb_info *info)
++{
++	dev_dbg(info->device, "%s\n", __func__);
++
++	/* Change source address registers to reflect the panning. */
++	atmel_mpopfb_update_sar(info, var);
++
++	return 0;
++}
++
++static void atmel_mpopfb_put_overlay_info(struct fb_info *info,
++		struct atmel_mpopfb_overlay_info overlay_info)
++{
++	struct atmel_mpopfb_info *sinfo = info->par;
++
++	/* We can update the position now since it is double buffered. */
++	switch (overlay_info.overlay) {
++	case ATMEL_MPOPFB_OVERLAY1:
++		mpop_writel(sinfo, ATMEL_MPOP_O1_POS,
++			(overlay_info.xpos << ATMEL_MPOP_O1_POS_O1_POS_X)
++			| (overlay_info.ypos << ATMEL_MPOP_O1_POS_O1_POS_Y));
++		break;
++	case ATMEL_MPOPFB_OVERLAY2:
++		mpop_writel(sinfo, ATMEL_MPOP_O2_POS,
++			(overlay_info.xpos << ATMEL_MPOP_O2_POS_O2_POS_X)
++			| (overlay_info.ypos << ATMEL_MPOP_O2_POS_O2_POS_Y));
++		break;
++	case ATMEL_MPOPFB_CURSOR:
++		mpop_writel(sinfo, ATMEL_MPOP_CURSOR_POS,
++			(overlay_info.xpos << ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X)
++			| (overlay_info.ypos << ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y));
++		break;
++	default:
++		dev_warn(info->device, "Unknown overlay type: %d\n",
++				overlay_info.overlay);
++		return;
++	}
++
++	/* Copy the overlay info to the mpopfb info structure. */
++	sinfo->overlay_info[overlay_info.overlay] = overlay_info;
++}
++
++static int atmel_mpopfb_ioctl(struct fb_info *info,
++		unsigned int cmd, unsigned long arg)
++{
++	void __user *argp = (void __user *)arg;
++	struct atmel_mpopfb_info *sinfo = info->par;
++	struct atmel_mpopfb_overlay_info overlay_info;
++
++	switch (cmd) {
++	case ATMEL_MPOP_FBIOPUT_OVERLAY_PALETTE:{
++			struct atmel_mpopfb_overlay_palette palette;
++			if (copy_from_user(&palette, argp, sizeof(palette)))
++				return -EFAULT;
++			atmel_mpopfb_put_overlay_palette(sinfo, &palette);
++			return 0;
++		}
++	case ATMEL_MPOP_FBIOGET_OVERLAY_PALETTE:{
++			struct atmel_mpopfb_overlay_palette palette;
++			atmel_mpopfb_get_overlay_palette(sinfo, &palette);
++			if (copy_to_user(argp, &palette, sizeof(palette)))
++				return -EFAULT;
++			return 0;
++		}
++	case ATMEL_MPOP_FBIOPUT_CURSOR_PALETTE:{
++			struct atmel_mpopfb_cursor_palette palette;
++			if (copy_from_user(&palette, argp, sizeof(palette)))
++				return -EFAULT;
++			atmel_mpopfb_put_cursor_palette(sinfo, &palette);
++			return 0;
++		}
++	case ATMEL_MPOP_FBIOGET_CURSOR_PALETTE:{
++			struct atmel_mpopfb_cursor_palette palette;
++			atmel_mpopfb_get_cursor_palette(sinfo, &palette);
++			if (copy_to_user(argp, &palette, sizeof(palette)))
++				return -EFAULT;
++			return 0;
++		}
++	case ATMEL_MPOP_FBIOPUT_OVERLAY_INFO:
++		if (copy_from_user(&overlay_info, argp, sizeof(overlay_info)))
++			return -EFAULT;
++		atmel_mpopfb_put_overlay_info(info, overlay_info);
++		return 0;
++	case ATMEL_MPOP_FBIOPUT_BASEIMG_INFO:
++		if (copy_from_user(&sinfo->baseimg_info, argp,
++					sizeof(sinfo->baseimg_info)))
++			return -EFAULT;
++
++		/* Check that new baseimg parameters are sane. */
++		if (atmel_mpopfb_check_var(&info->var, info))
++			return -EFAULT;
++
++		/* Update hardware configuration. */
++		atmel_mpopfb_set_par(info);
++		return 0;
++	case ATMEL_MPOP_FBIOGET_BASEIMG_INFO:
++		return copy_to_user(argp, &sinfo->baseimg_info,
++				sizeof(sinfo->baseimg_info)) ? -EFAULT : 0;
++	case ATMEL_MPOP_FBIOPUT_RGBCONV_COEFFS:
++		if (copy_from_user(&sinfo->rgbconv_coeffs, argp,
++					sizeof(sinfo->rgbconv_coeffs)))
++			return -EFAULT;
++
++		/* Update hardware configuration. */
++		if (atmel_mpopfb_set_par(info))
++			return -EFAULT;
++
++		return 0;
++	case ATMEL_MPOP_FBIOGET_RGBCONV_COEFFS:
++		return copy_to_user(argp, &sinfo->rgbconv_coeffs,
++				sizeof(sinfo->rgbconv_coeffs)) ? -EFAULT : 0;
++	case ATMEL_MPOP_FBIO_CONNECT_TO_LCDC:
++		atmel_mpopfb_connect_to_lcdc(sinfo);
++		return 0;
++	case ATMEL_MPOP_FBIO_DISCONNECT_FROM_LCDC:
++		atmel_mpopfb_disconnect_from_lcdc(sinfo);
++		return 0;
++	default:
++		return -EINVAL;
++	}
++
++	/* Force MPOP to be updated with any new parameters. */
++	atmel_mpopfb_set_par(info);
++}
++
++static int atmel_mpopfb_setcolreg(unsigned int regno, unsigned int red,
++				  unsigned int green, unsigned int blue,
++				  unsigned int transp, struct fb_info *info)
++{
++	return 0;
++}
++
++static struct fb_ops atmel_mpopfb_ops = {
++	.owner		= THIS_MODULE,
++	.fb_check_var	= atmel_mpopfb_check_var,
++	.fb_set_par	= atmel_mpopfb_set_par,
++	.fb_setcolreg	= atmel_mpopfb_setcolreg,
++	.fb_pan_display	= atmel_mpopfb_pan_display,
++	.fb_imageblit	= cfb_imageblit,
++	.fb_ioctl	= atmel_mpopfb_ioctl,
++	.fb_fillrect	= cfb_fillrect,
++	.fb_copyarea	= cfb_copyarea,
++};
++
++static irqreturn_t atmel_mpopfb_interrupt(int irq, void *dev_id)
++{
++	struct fb_info *info = dev_id;
++	struct atmel_mpopfb_info *sinfo = info->par;
++	u32 status;
++
++	/* Check which interrupt we have. */
++	status = mpop_readl(sinfo, ATMEL_MPOP_INTSTATUS);
++
++	/* Clear interrupts. */
++	mpop_writel(sinfo, ATMEL_MPOP_INTCLEAR, status);
++
++	if (status & ATMEL_MPOP_EOP) {
++		/* End Of Picture. Start new picture. */
++		mpop_writel(sinfo, ATMEL_MPOP_CR,
++				ATMEL_MPOP_CR_START_MASK
++				| mpop_readl(sinfo, ATMEL_MPOP_CR));
++	} else if (status & ATMEL_MPOP_OUT) {
++		dev_err(info->dev,
++			"MPOP Output DMA interface Bus Error (address=0x%x)!\n",
++			mpop_readl(sinfo, ATMEL_MPOP_OUT_BEAR));
++	} else if (status & ATMEL_MPOP_YUV) {
++		dev_err(info->dev,
++			"MPOP YUV Picture Fetch DMA interface Bus Error (address=0x%x)!\n",
++			mpop_readl(sinfo, ATMEL_MPOP_YUV_BEAR));
++	} else if (status & ATMEL_MPOP_OVERLAY) {
++		dev_err(info->dev,
++			"MPOP Overlay Picture Fetch DMA interface Bus Error (address=0x%x)!\n",
++			mpop_readl(sinfo, ATMEL_MPOP_OVERLAY_BEAR));
++	}
++
++	dev_dbg(info->device, "%s\n", __func__);
++	dev_dbg(info->device, "  * status: 0x%x \n", status);
++
++	return IRQ_HANDLED;
++}
++
++static int __init atmel_mpopfb_init_fbinfo(struct atmel_mpopfb_info *sinfo)
++{
++	struct fb_info *info = sinfo->info;
++	int ret = 0;
++
++	info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
++
++	dev_info(info->device,
++			"%luKiB frame buffer at %08lx (mapped at %p)\n",
++			(unsigned long)info->fix.smem_len / 1024,
++			(unsigned long)info->fix.smem_start, info->screen_base);
++
++	return ret;
++}
++
++static void atmel_mpopfb_start_clock(struct atmel_mpopfb_info *sinfo)
++{
++	clk_enable(sinfo->mpop_hclk);
++	clk_enable(sinfo->mpop_pclk);
++}
++
++static void atmel_mpopfb_stop_clock(struct atmel_mpopfb_info *sinfo)
++{
++	clk_disable(sinfo->mpop_hclk);
++	clk_disable(sinfo->mpop_pclk);
++}
++
++static int __init atmel_mpopfb_probe(struct platform_device *pdev)
++{
++	struct device			*dev = &pdev->dev;
++	struct fb_info			*info;
++	struct fb_info			*lcdc_info;
++	struct atmel_mpopfb_info	*sinfo;
++	struct atmel_mpopfb_info	*pdata_sinfo;
++	struct resource			*regs = NULL;
++	struct resource			*slave = NULL;
++	struct resource			*map = NULL;
++	int				ret;
++
++	dev_dbg(dev, "%s BEGIN\n", __func__);
++
++	ret = -ENOMEM;
++	info = framebuffer_alloc(sizeof(struct atmel_mpopfb_info), dev);
++	if (!info) {
++		dev_err(dev, "cannot allocate memory\n");
++		goto out;
++	}
++
++	sinfo = info->par;
++
++	if (dev->platform_data) {
++		pdata_sinfo = dev->platform_data;
++		sinfo->lcdc_pdev = pdata_sinfo->lcdc_pdev;
++		if (!sinfo->lcdc_pdev) {
++			dev_err(dev, "cannot get hold of lcdcfb device\n");
++			goto free_info;
++		}
++	} else {
++		dev_err(dev, "cannot get default configuration\n");
++		goto free_info;
++	}
++
++	sinfo->info = info;
++	sinfo->pdev = pdev;
++	sinfo->running = 0;
++	sinfo->connected_to_lcdc = 0;
++	sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].enabled = 0;
++	sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].enabled = 0;
++	sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].enabled = 0;
++
++	/* Setup default info */
++
++	/* Set fb_var_screeninfo equal to that of the lcdcfb driver. */
++	lcdc_info = (struct fb_info *)platform_get_drvdata(sinfo->lcdc_pdev);
++	memcpy(&info->var, &lcdc_info->var, sizeof(struct fb_var_screeninfo));
++
++	/* Set default position of the image on the screen to (0,0) and
++	   no scaling */
++	sinfo->baseimg_info.xpos = 0;
++	sinfo->baseimg_info.ypos = 0;
++	sinfo->baseimg_info.xsize = info->var.xres;
++	sinfo->baseimg_info.ysize = info->var.yres;
++
++	/* Use YCbCr --> RGB converion per default. */
++	memcpy(&sinfo->rgbconv_coeffs, &atmel_mpop_ycrcb2rgb_coeffs,
++	       sizeof(struct atmel_mpopfb_rgbconv_coeffs));
++
++	strcpy(info->fix.id, sinfo->pdev->name);
++	info->flags = ATMEL_MPOPFB_FBINFO_DEFAULT;
++	info->fbops = &atmel_mpopfb_ops;
++
++	//memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
++	info->fix = atmel_mpopfb_fix;
++
++	/* Enable MPOP Clocks */
++	sinfo->mpop_hclk = clk_get(dev, "hclk");
++	sinfo->mpop_pclk = clk_get(dev, "pclk");
++	if (IS_ERR(sinfo->mpop_hclk)) {
++		ret = PTR_ERR(sinfo->mpop_hclk);
++		goto put_bus_clk;
++	}
++	if (IS_ERR(sinfo->mpop_pclk)) {
++		ret = PTR_ERR(sinfo->mpop_pclk);
++		goto stop_clk;
++	}
++	atmel_mpopfb_start_clock(sinfo);
++
++	//ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
++	//                   info->monspecs.modedb_len, info->monspecs.modedb,
++	//                   sinfo->default_bpp);
++	//if (!ret) {
++	//      dev_err(dev, "no suitable video mode found\n");
++	//      goto stop_clk;
++	//}
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs) {
++		dev_err(dev, "resources unusable\n");
++		ret = -ENXIO;
++		goto stop_clk;
++	}
++
++	slave = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++	if (!slave) {
++		dev_err(dev, "slave interface memory resource unusable\n");
++		ret = -ENXIO;
++		goto stop_clk;
++	}
++	sinfo->slave_base = (void *)slave->start;
++
++	sinfo->irq_base = platform_get_irq(pdev, 0);
++	if (sinfo->irq_base < 0) {
++		dev_err(dev, "unable to get irq\n");
++		ret = sinfo->irq_base;
++		goto stop_clk;
++	}
++
++	/* Initialize video memory */
++	map = platform_get_resource(pdev, IORESOURCE_MEM, 2);
++	if (map) {
++		/* use a pre-allocated memory buffer */
++		info->fix.smem_start = map->start;
++		info->fix.smem_len = map->end - map->start + 1;
++		if (!request_mem_region(info->fix.smem_start,
++					info->fix.smem_len, pdev->name)) {
++			//ret = -EBUSY;
++			//goto stop_clk;
++			/* Probably in use by LCD controller. */
++			info->screen_base = lcdc_info->screen_base;
++		} else {
++			info->screen_base =
++			    ioremap(info->fix.smem_start, info->fix.smem_len);
++			if (!info->screen_base)
++				goto release_intmem;
++		}
++	} else {
++		/* alocate memory buffer */
++		ret = atmel_mpopfb_alloc_video_memory(sinfo);
++		if (ret < 0) {
++			dev_err(dev, "cannot allocate mpop framebuffer: %d\n",
++				ret);
++			goto stop_clk;
++		}
++	}
++
++	/* MPOP registers */
++	info->fix.mmio_start = regs->start;
++	info->fix.mmio_len = regs->end - regs->start + 1;
++
++	if (!request_mem_region(info->fix.mmio_start,
++				info->fix.mmio_len, pdev->name)) {
++		ret = -EBUSY;
++		goto free_fb;
++	}
++
++	sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
++	if (!sinfo->mmio) {
++		dev_err(dev, "cannot map MPOP registers\n");
++		goto release_mem;
++	}
++
++	/* MPOP slave interface */
++	if (!request_mem_region(slave->start,
++				slave->end - slave->start + 1, pdev->name)) {
++		dev_err(dev,
++			"error requesting memory region for MPOP slave interface\n");
++		ret = -EBUSY;
++		goto unmap_mmio;
++	}
++
++	/* interrupt */
++	ret =
++	    request_irq(sinfo->irq_base, atmel_mpopfb_interrupt, 0, pdev->name,
++			info);
++	if (ret) {
++		dev_err(dev, "request_irq failed: %d\n", ret);
++		goto release_mem_slave;
++	}
++
++	ret = atmel_mpopfb_init_fbinfo(sinfo);
++	if (ret < 0) {
++		dev_err(dev, "init fbinfo failed: %d\n", ret);
++		goto unregister_irqs;
++	}
++
++	/*
++	 * This makes sure that our colour bitfield
++	 * descriptors are correctly initialised.
++	 */
++	atmel_mpopfb_check_var(&info->var, info);
++
++	ret = fb_set_var(info, &info->var);
++	if (ret) {
++		dev_warn(dev, "unable to set display parameters\n");
++		goto free_cmap;
++	}
++
++	dev_set_drvdata(dev, info);
++
++	/*
++	 * Tell the world that we're ready to go
++	 */
++	ret = register_framebuffer(info);
++	if (ret < 0) {
++		dev_err(dev, "failed to register framebuffer device: %d\n",
++			ret);
++		goto free_cmap;
++	}
++
++	dev_info(dev, "fb%d: Atmel MPOP at 0x%08lx (mapped at %p), irq %lu\n",
++		 info->node, info->fix.mmio_start, sinfo->mmio,
++		 sinfo->irq_base);
++
++	return 0;
++
++free_cmap:
++	fb_dealloc_cmap(&info->cmap);
++unregister_irqs:
++	free_irq(sinfo->irq_base, info);
++release_mem_slave:
++	release_mem_region(slave->start, slave->end - slave->start + 1);
++unmap_mmio:
++	iounmap(sinfo->mmio);
++release_mem:
++	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
++free_fb:
++	if (map)
++		iounmap(info->screen_base);
++	else
++		atmel_mpopfb_free_video_memory(sinfo);
++
++release_intmem:
++	if (map)
++		release_mem_region(info->fix.smem_start, info->fix.smem_len);
++stop_clk:
++	atmel_mpopfb_stop_clock(sinfo);
++	clk_put(sinfo->mpop_hclk);
++put_bus_clk:
++	if (sinfo->mpop_pclk)
++		clk_put(sinfo->mpop_pclk);
++free_info:
++	framebuffer_release(info);
++out:
++	dev_dbg(dev, "%s FAILED\n", __func__);
++	return ret;
++}
++
++static int __exit atmel_mpopfb_remove(struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++	struct fb_info *info = dev_get_drvdata(dev);
++	struct atmel_mpopfb_info *sinfo = info->par;
++
++	if (!sinfo)
++		return 0;
++
++	unregister_framebuffer(info);
++	atmel_mpopfb_stop_clock(sinfo);
++	clk_put(sinfo->mpop_hclk);
++	clk_put(sinfo->mpop_pclk);
++	fb_dealloc_cmap(&info->cmap);
++	free_irq(sinfo->irq_base, info);
++	iounmap(sinfo->mmio);
++	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
++	if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
++		iounmap(info->screen_base);
++		release_mem_region(info->fix.smem_start, info->fix.smem_len);
++	} else {
++		atmel_mpopfb_free_video_memory(sinfo);
++	}
++
++	dev_set_drvdata(dev, NULL);
++	framebuffer_release(info);
++
++	return 0;
++}
++
++static struct platform_driver atmel_mpopfb_driver = {
++	.remove = __exit_p(atmel_mpopfb_remove),
++	.driver.name = "atmel_mpopfb",
++	.driver.owner = THIS_MODULE,
++};
++
++static int __init atmel_mpopfb_init(void)
++{
++	return platform_driver_probe(&atmel_mpopfb_driver, atmel_mpopfb_probe);
++}
++
++static void __exit atmel_mpopfb_exit(void)
++{
++	platform_driver_unregister(&atmel_mpopfb_driver);
++}
++
++module_init(atmel_mpopfb_init);
++module_exit(atmel_mpopfb_exit);
++
++MODULE_DESCRIPTION("AT32 MPOP framebuffer driver");
++MODULE_AUTHOR("Ronny Pedersen <rpedersen@atmel.com>");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
+index c510367..55a3a34 100644
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -221,12 +221,12 @@ config DAVINCI_WATCHDOG
+ 
+ # AVR32 Architecture
+ 
+-config AT32AP700X_WDT
+-	tristate "AT32AP700x watchdog"
+-	depends on CPU_AT32AP700X
++config AT32_WDT
++	tristate "AVR32 On-Chip Watchdog Timer"
++	depends on AVR32
+ 	help
+-	  Watchdog timer embedded into AT32AP700x devices. This will reboot
+-	  your system when the timeout is reached.
++	  Watchdog timer embedded into AT32AP700x and similar devices.
++	  This will reboot your system when the timeout is reached.
+ 
+ # BLACKFIN Architecture
+ 
+diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
+index e0ef123..7db92cd 100644
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -43,7 +43,7 @@ obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
+ # ARM26 Architecture
+ 
+ # AVR32 Architecture
+-obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
++obj-$(CONFIG_AT32_WDT) += at32_wdt.o
+ 
+ # BLACKFIN Architecture
+ obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o
+diff --git a/drivers/watchdog/at32_wdt.c b/drivers/watchdog/at32_wdt.c
+new file mode 100644
+index 0000000..bbdb997
+--- /dev/null
++++ b/drivers/watchdog/at32_wdt.c
+@@ -0,0 +1,620 @@
++/*
++ * Watchdog driver for Atmel AVR32 devices
++ *
++ * Copyright (C) 2005-2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ *
++ * AT32AP700x Errata: WDT Clear is blocked after WDT Reset
++ *
++ * A watchdog timer event will, after reset, block writes to the WDT_CLEAR
++ * register, preventing the program to clear the next Watchdog Timer Reset.
++ *
++ * If you still want to use the WDT after a WDT reset a small code can be
++ * insterted at the startup checking the AVR32_PM.rcause register for WDT reset
++ * and use a GPIO pin to reset the system. This method requires that one of the
++ * GPIO pins are available and connected externally to the RESET_N pin. After
++ * the GPIO pin has pulled down the reset line the GPIO will be reset and leave
++ * the pin tristated with pullup.
++ */
++
++#include <linux/clk.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/miscdevice.h>
++#include <linux/fs.h>
++#include <linux/platform_device.h>
++#include <linux/watchdog.h>
++#include <linux/uaccess.h>
++#include <linux/io.h>
++#include <linux/log2.h>
++#include <linux/spinlock.h>
++
++#include <mach/cpu.h>
++#include <mach/pm.h>
++
++/*
++ * AT32AP700x uses a 16-bit prescaler. This limits the timeout range
++ * somewhat. Later chips use a 32-bit prescaler.
++ */
++#define TIMEOUT_MIN		1
++#ifdef CONFIG_CPU_AT32AP700X
++# define TIMEOUT_MAX		2
++# define TIMEOUT_DEFAULT	TIMEOUT_MAX
++#else
++# define TIMEOUT_MAX		131072
++# define TIMEOUT_DEFAULT	64
++#endif
++
++/* module parameters */
++static int timeout =  TIMEOUT_DEFAULT;
++module_param(timeout, int, 0);
++MODULE_PARM_DESC(timeout,
++		"Timeout value. Any power of two between 1 and "
++		__MODULE_STRING(TIMEOUT_MAX) " seconds. (default="
++		__MODULE_STRING(TIMEOUT_DEFAULT) ")");
++
++static int nowayout = WATCHDOG_NOWAYOUT;
++module_param(nowayout, int, 0);
++MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
++		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
++
++/* Watchdog registers and write/read macro */
++#define WDT_CTRL		0x00
++#define WDT_CTRL_EN		   0
++#define WDT_CTRL_PSEL		   8
++#define WDT_CTRL_CEN		  16
++#define WDT_CTRL_CSEL		  17
++#define WDT_CTRL_KEY		  24
++
++#define WDT_CLR			0x04
++
++#define WDT_BIT(name)		(1 << WDT_##name)
++#define WDT_BF(name, value)	((value) << WDT_##name)
++
++#define wdt_readl(dev, reg)				\
++	__raw_readl((dev)->regs + WDT_##reg)
++#define wdt_writel(dev, reg, value)			\
++	__raw_writel((value), (dev)->regs + WDT_##reg)
++
++struct wdt_at32 {
++	void __iomem		*regs;
++	struct clk		*pclk;
++	struct clk		*src_clk;
++	spinlock_t		io_lock;
++	int			timeout;
++	int			boot_status;
++	unsigned long		users;
++	struct miscdevice	miscdev;
++};
++
++static struct wdt_at32 *wdt;
++static char expect_release;
++
++static inline void wdt_clk_enable(struct wdt_at32 *w)
++{
++	if (!cpu_is_at32ap7000())
++		clk_enable(w->pclk);
++}
++
++static inline void wdt_clk_disable(struct wdt_at32 *w)
++{
++	if (!cpu_is_at32ap7000())
++		clk_disable(w->pclk);
++}
++
++static inline int at32_wdt_version(void)
++{
++	if (cpu_is_at32ap7000())
++		return 1;
++	if (cpu_is_at32ap7200())
++		return 3;
++
++	BUG();
++}
++
++static unsigned long at32_wdt_calc_psel(int timeout)
++{
++	if (at32_wdt_version() == 1)
++		/* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
++		return (timeout > 1) ? 0xf : 0xe;
++
++	return order_base_2(timeout) + 14;
++}
++
++/*
++ * Disable the watchdog.
++ */
++static inline void at32_wdt_stop(void)
++{
++	unsigned long ctrl;
++	unsigned long ctrl_mask = 0;
++
++	switch (at32_wdt_version()) {
++	case 3:
++		ctrl_mask |= (1 << WDT_CTRL_CEN) | (1 << WDT_CTRL_CSEL);
++		/* fall through */
++	case 2:
++		ctrl_mask |= 0x1f << WDT_CTRL_PSEL;
++		break;
++	case 1:
++		ctrl_mask |= 0x0f << WDT_CTRL_PSEL;
++		break;
++	}
++
++	wdt_clk_enable(wdt);
++	spin_lock(&wdt->io_lock);
++	ctrl = wdt_readl(wdt, CTRL);
++	ctrl &= ctrl_mask;
++	wdt_writel(wdt, CTRL, ctrl | WDT_BF(CTRL_KEY, 0x55));
++	wdt_writel(wdt, CTRL, ctrl | WDT_BF(CTRL_KEY, 0xaa));
++	spin_unlock(&wdt->io_lock);
++	wdt_clk_disable(wdt);
++}
++
++/*
++ * Enable and reset the watchdog.
++ */
++static inline void at32_wdt_start(void)
++{
++	unsigned long psel;
++	unsigned long ctrl;
++
++	psel = at32_wdt_calc_psel(wdt->timeout);
++	ctrl = WDT_BIT(CTRL_EN) | WDT_BF(CTRL_PSEL, psel);
++
++	if (at32_wdt_version() >= 3)
++		ctrl |= wdt_readl(wdt, CTRL)
++			& (WDT_BIT(CTRL_CSEL) | WDT_BIT(CTRL_CEN));
++
++	wdt_clk_enable(wdt);
++	spin_lock(&wdt->io_lock);
++	wdt_writel(wdt, CTRL, ctrl | WDT_BF(CTRL_KEY, 0x55));
++	wdt_writel(wdt, CTRL, ctrl | WDT_BF(CTRL_KEY, 0xaa));
++	spin_unlock(&wdt->io_lock);
++	wdt_clk_disable(wdt);
++}
++
++/*
++ * Pat the watchdog timer.
++ */
++static inline void at32_wdt_pat(void)
++{
++	wdt_clk_enable(wdt);
++	spin_lock(&wdt->io_lock);
++	wdt_writel(wdt, CLR, 0x42);
++	spin_unlock(&wdt->io_lock);
++	wdt_clk_disable(wdt);
++}
++
++/*
++ * Watchdog device is opened, and watchdog starts running.
++ */
++static int at32_wdt_open(struct inode *inode, struct file *file)
++{
++	if (test_and_set_bit(1, &wdt->users))
++		return -EBUSY;
++
++	at32_wdt_start();
++	return nonseekable_open(inode, file);
++}
++
++/*
++ * Close the watchdog device.
++ */
++static int at32_wdt_close(struct inode *inode, struct file *file)
++{
++	if (expect_release == 42) {
++		at32_wdt_stop();
++	} else {
++		dev_dbg(wdt->miscdev.parent,
++			"unexpected close, not stopping watchdog!\n");
++		at32_wdt_pat();
++	}
++	clear_bit(1, &wdt->users);
++	expect_release = 0;
++	return 0;
++}
++
++/*
++ * Change the watchdog time interval.
++ */
++static int at32_wdt_settimeout(int time)
++{
++	/*
++	 * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max
++	 * prescaler is 2 ^ 16 (or 2 ^ 32) allowing up to TIMEOUT_MAX
++	 * seconds timeout.
++	 */
++	if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX)
++			|| !is_power_of_2(time))
++		return -EINVAL;
++
++	/*
++	 * Set new watchdog time. It will be used when at32_wdt_start() is
++	 * called.
++	 */
++	wdt->timeout = time;
++	return 0;
++}
++
++/*
++ * Get the watchdog status.
++ */
++static int at32_wdt_get_status(void)
++{
++	int rcause;
++	int status = 0;
++
++	rcause = at32_get_reset_cause();
++
++	switch (rcause) {
++	case AT32_RCAUSE_BOD:
++		status = WDIOF_POWERUNDER;
++		break;
++	case AT32_RCAUSE_EXT:
++		status = WDIOF_EXTERN1;
++		break;
++	case AT32_RCAUSE_JTAG:
++	case AT32_RCAUSE_JTAGHARD:
++	case AT32_RCAUSE_OCDRST:
++		status = WDIOF_EXTERN2;
++		break;
++	case AT32_RCAUSE_WDT:
++		status = WDIOF_CARDRESET;
++		break;
++	case AT32_RCAUSE_POR:
++	case AT32_RCAUSE_NTAE:
++	case AT32_RCAUSE_SLEEP:
++	case AT32_RCAUSE_CPUERR:
++	default:
++		break;
++	}
++
++	return status;
++}
++
++static struct watchdog_info at32_wdt_info = {
++	.identity	= "at32 watchdog",
++	.options	= WDIOF_SETTIMEOUT |
++			  WDIOF_KEEPALIVEPING |
++			  WDIOF_MAGICCLOSE,
++};
++
++/*
++ * Handle commands from user-space.
++ */
++static long at32_wdt_ioctl(struct file *file,
++				unsigned int cmd, unsigned long arg)
++{
++	int ret = -ENOTTY;
++	int time;
++	void __user *argp = (void __user *)arg;
++	int __user *p = argp;
++
++	switch (cmd) {
++	case WDIOC_GETSUPPORT:
++		ret = copy_to_user(argp, &at32_wdt_info,
++				sizeof(at32_wdt_info)) ? -EFAULT : 0;
++		break;
++	case WDIOC_GETSTATUS:
++		ret = put_user(0, p);
++		break;
++	case WDIOC_GETBOOTSTATUS:
++		ret = put_user(wdt->boot_status, p);
++		break;
++	case WDIOC_SETOPTIONS:
++		ret = get_user(time, p);
++		if (ret)
++			break;
++		if (time & WDIOS_DISABLECARD)
++			at32_wdt_stop();
++		if (time & WDIOS_ENABLECARD)
++			at32_wdt_start();
++		ret = 0;
++		break;
++	case WDIOC_KEEPALIVE:
++		at32_wdt_pat();
++		ret = 0;
++		break;
++	case WDIOC_SETTIMEOUT:
++		ret = get_user(time, p);
++		if (ret)
++			break;
++		ret = at32_wdt_settimeout(time);
++		if (ret)
++			break;
++		/* Enable new time value */
++		at32_wdt_start();
++		/* fall through */
++	case WDIOC_GETTIMEOUT:
++		ret = put_user(wdt->timeout, p);
++		break;
++	}
++
++	return ret;
++}
++
++static ssize_t at32_wdt_write(struct file *file, const char __user *data,
++				size_t len, loff_t *ppos)
++{
++	/* See if we got the magic character 'V' and reload the timer */
++	if (len) {
++		if (!nowayout) {
++			size_t i;
++
++			/*
++			 * note: just in case someone wrote the magic
++			 * character five months ago...
++			 */
++			expect_release = 0;
++
++			/*
++			 * scan to see whether or not we got the magic
++			 * character
++			 */
++			for (i = 0; i != len; i++) {
++				char c;
++				if (get_user(c, data + i))
++					return -EFAULT;
++				if (c == 'V')
++					expect_release = 42;
++			}
++		}
++		/* someone wrote to us, we should pat the watchdog */
++		at32_wdt_pat();
++	}
++	return len;
++}
++
++static const struct file_operations at32_wdt_fops = {
++	.owner		= THIS_MODULE,
++	.llseek		= no_llseek,
++	.unlocked_ioctl	= at32_wdt_ioctl,
++	.open		= at32_wdt_open,
++	.release	= at32_wdt_close,
++	.write		= at32_wdt_write,
++};
++
++static int __init at32_wdt_enable_source_clock(struct platform_device *pdev)
++{
++	struct clk	*clk;
++	unsigned int	csel;
++	u32		ctrl;
++
++	/* Only v3+ have selectable source clock */
++	if (at32_wdt_version() < 3)
++		return 0;
++
++	csel = 1;
++
++	/*
++	 * Prefer the much more accurate crystal oscillator in favor
++	 * of the RC oscillator.
++	 */
++	clk = clk_get(NULL, "osc32");
++	if (IS_ERR(clk)) {
++		csel = 0;
++		clk = clk_get(NULL, "rcosc");
++	}
++	if (IS_ERR(clk)) {
++		dev_dbg(&pdev->dev, "No source clock\n");
++		return -ENXIO;
++	}
++
++	clk_enable(clk);
++
++	dev_info(&pdev->dev, "Using 32 kHz %s oscillator\n",
++			csel ? "crystal" : "RC");
++
++	wdt_clk_enable(wdt);
++	ctrl = (csel << WDT_CTRL_CSEL) | (1 << WDT_CTRL_CEN);
++
++	/*
++	 * Make sure the WDT is disabled, and disable any clocks that
++	 * may have been selected earlier.
++	 */
++	wdt_writel(wdt, CTRL, 0x55 << WDT_CTRL_KEY);
++	wdt_writel(wdt, CTRL, 0xaa << WDT_CTRL_KEY);
++
++	/* Wait for the clock to become properly deselected */
++	while (wdt_readl(wdt, CTRL) & (1 << WDT_CTRL_CEN))
++		cpu_relax();
++
++	/* Select the new clock */
++	wdt_writel(wdt, CTRL, ctrl | (0x55 << WDT_CTRL_KEY));
++	wdt_writel(wdt, CTRL, ctrl | (0xaa << WDT_CTRL_KEY));
++
++	/* Wait for the new clock to become usable */
++	while (!(wdt_readl(wdt, CTRL) & (1 << WDT_CTRL_CEN)))
++		cpu_relax();
++
++	wdt_clk_disable(wdt);
++	return 0;
++}
++
++static void at32_wdt_disable_source_clock(void)
++{
++	wdt_clk_enable(wdt);
++
++	wdt_writel(wdt, CTRL, 0x55 << WDT_CTRL_KEY);
++	wdt_writel(wdt, CTRL, 0xaa << WDT_CTRL_KEY);
++
++	/* Wait for the clock to become properly deselected */
++	while (wdt_readl(wdt, CTRL) & (1 << WDT_CTRL_CEN))
++		cpu_relax();
++
++	wdt_clk_disable(wdt);
++}
++
++static int __init at32_wdt_probe(struct platform_device *pdev)
++{
++	struct resource	*regs;
++	int ret;
++
++	if (wdt) {
++		dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n");
++		return -EBUSY;
++	}
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs) {
++		dev_dbg(&pdev->dev, "missing mmio resource\n");
++		return -ENXIO;
++	}
++
++	wdt = kzalloc(sizeof(struct wdt_at32), GFP_KERNEL);
++	if (!wdt) {
++		dev_dbg(&pdev->dev, "no memory for wdt structure\n");
++		return -ENOMEM;
++	}
++
++	wdt->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!wdt->regs) {
++		ret = -ENOMEM;
++		dev_dbg(&pdev->dev, "could not map I/O memory\n");
++		goto err_free;
++	}
++
++	if (!cpu_is_at32ap7000()) {
++		wdt->pclk = clk_get(&pdev->dev, "pclk");
++		if (IS_ERR(wdt->pclk)) {
++			dev_dbg(&pdev->dev, "no peripheral clock\n");
++			ret = -ENXIO;
++			goto err_iounmap;
++		}
++	}
++
++	ret = at32_wdt_enable_source_clock(pdev);
++	if (ret)
++		goto err_put_clk;
++
++	spin_lock_init(&wdt->io_lock);
++	wdt->boot_status = at32_wdt_get_status();
++
++	/* Work-around for watchdog silicon errata. */
++	if (cpu_is_at32ap7000()
++			&& (wdt->boot_status & WDIOF_CARDRESET)) {
++		dev_info(&pdev->dev, "CPU must be reset with external "
++				"reset or POR due to silicon errata.\n");
++		ret = -EIO;
++		goto err_disable_source_clock;
++	} else {
++		wdt->users = 0;
++	}
++	wdt->miscdev.minor = WATCHDOG_MINOR;
++	wdt->miscdev.name = "watchdog";
++	wdt->miscdev.fops = &at32_wdt_fops;
++
++	if (at32_wdt_settimeout(timeout)) {
++		at32_wdt_settimeout(TIMEOUT_DEFAULT);
++		dev_dbg(&pdev->dev,
++			"default timeout invalid, set to %d sec.\n",
++			TIMEOUT_DEFAULT);
++	}
++
++	ret = misc_register(&wdt->miscdev);
++	if (ret) {
++		dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
++		goto err_iounmap;
++	}
++
++	platform_set_drvdata(pdev, wdt);
++	wdt->miscdev.parent = &pdev->dev;
++	dev_info(&pdev->dev,
++		"AT32 WDT at 0x%p, timeout %d sec (nowayout=%d)\n",
++		wdt->regs, wdt->timeout, nowayout);
++
++	return 0;
++
++err_disable_source_clock:
++	at32_wdt_disable_source_clock();
++err_put_clk:
++	if (!cpu_is_at32ap7000())
++		clk_put(wdt->pclk);
++err_iounmap:
++	iounmap(wdt->regs);
++err_free:
++	kfree(wdt);
++	wdt = NULL;
++	return ret;
++}
++
++static int __exit at32_wdt_remove(struct platform_device *pdev)
++{
++	if (wdt && platform_get_drvdata(pdev) == wdt) {
++		/* Stop the timer before we leave */
++		if (!nowayout) {
++			at32_wdt_stop();
++			at32_wdt_disable_source_clock();
++		}
++
++		misc_deregister(&wdt->miscdev);
++		if (!cpu_is_at32ap7000())
++			clk_put(wdt->pclk);
++		iounmap(wdt->regs);
++		kfree(wdt);
++		wdt = NULL;
++		platform_set_drvdata(pdev, NULL);
++	}
++	return 0;
++}
++
++static void at32_wdt_shutdown(struct platform_device *pdev)
++{
++	at32_wdt_stop();
++}
++
++#ifdef CONFIG_PM
++static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message)
++{
++	at32_wdt_stop();
++	return 0;
++}
++
++static int at32_wdt_resume(struct platform_device *pdev)
++{
++	if (wdt->users)
++		at32_wdt_start();
++	return 0;
++}
++#else
++#define at32_wdt_suspend NULL
++#define at32_wdt_resume NULL
++#endif
++
++/* work with hotplug and coldplug */
++MODULE_ALIAS("platform:at32_wdt");
++
++static struct platform_driver at32_wdt_driver = {
++	.remove		= __exit_p(at32_wdt_remove),
++	.suspend	= at32_wdt_suspend,
++	.resume		= at32_wdt_resume,
++	.driver		= {
++		.name	= "at32_wdt",
++		.owner	= THIS_MODULE,
++	},
++	.shutdown	= at32_wdt_shutdown,
++};
++
++static int __init at32_wdt_init(void)
++{
++	return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe);
++}
++module_init(at32_wdt_init);
++
++static void __exit at32_wdt_exit(void)
++{
++	platform_driver_unregister(&at32_wdt_driver);
++}
++module_exit(at32_wdt_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("Watchdog driver for Atmel AVR32 devices");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c
+deleted file mode 100644
+index e8ae638..0000000
+--- a/drivers/watchdog/at32ap700x_wdt.c
++++ /dev/null
+@@ -1,449 +0,0 @@
+-/*
+- * Watchdog driver for Atmel AT32AP700X devices
+- *
+- * Copyright (C) 2005-2006 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- *
+- *
+- * Errata: WDT Clear is blocked after WDT Reset
+- *
+- * A watchdog timer event will, after reset, block writes to the WDT_CLEAR
+- * register, preventing the program to clear the next Watchdog Timer Reset.
+- *
+- * If you still want to use the WDT after a WDT reset a small code can be
+- * insterted at the startup checking the AVR32_PM.rcause register for WDT reset
+- * and use a GPIO pin to reset the system. This method requires that one of the
+- * GPIO pins are available and connected externally to the RESET_N pin. After
+- * the GPIO pin has pulled down the reset line the GPIO will be reset and leave
+- * the pin tristated with pullup.
+- */
+-
+-#include <linux/init.h>
+-#include <linux/kernel.h>
+-#include <linux/module.h>
+-#include <linux/moduleparam.h>
+-#include <linux/miscdevice.h>
+-#include <linux/fs.h>
+-#include <linux/platform_device.h>
+-#include <linux/watchdog.h>
+-#include <linux/uaccess.h>
+-#include <linux/io.h>
+-#include <linux/spinlock.h>
+-
+-#define TIMEOUT_MIN		1
+-#define TIMEOUT_MAX		2
+-#define TIMEOUT_DEFAULT		TIMEOUT_MAX
+-
+-/* module parameters */
+-static int timeout =  TIMEOUT_DEFAULT;
+-module_param(timeout, int, 0);
+-MODULE_PARM_DESC(timeout,
+-		"Timeout value. Limited to be 1 or 2 seconds. (default="
+-		__MODULE_STRING(TIMEOUT_DEFAULT) ")");
+-
+-static int nowayout = WATCHDOG_NOWAYOUT;
+-module_param(nowayout, int, 0);
+-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+-		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+-
+-/* Watchdog registers and write/read macro */
+-#define WDT_CTRL		0x00
+-#define WDT_CTRL_EN		   0
+-#define WDT_CTRL_PSEL		   8
+-#define WDT_CTRL_KEY		  24
+-
+-#define WDT_CLR			0x04
+-
+-#define WDT_RCAUSE		0x10
+-#define WDT_RCAUSE_POR		   0
+-#define WDT_RCAUSE_EXT		   2
+-#define WDT_RCAUSE_WDT		   3
+-#define WDT_RCAUSE_JTAG		   4
+-#define WDT_RCAUSE_SERP		   5
+-
+-#define WDT_BIT(name)		(1 << WDT_##name)
+-#define WDT_BF(name, value)	((value) << WDT_##name)
+-
+-#define wdt_readl(dev, reg)				\
+-	__raw_readl((dev)->regs + WDT_##reg)
+-#define wdt_writel(dev, reg, value)			\
+-	__raw_writel((value), (dev)->regs + WDT_##reg)
+-
+-struct wdt_at32ap700x {
+-	void __iomem		*regs;
+-	spinlock_t		io_lock;
+-	int			timeout;
+-	int			boot_status;
+-	unsigned long		users;
+-	struct miscdevice	miscdev;
+-};
+-
+-static struct wdt_at32ap700x *wdt;
+-static char expect_release;
+-
+-/*
+- * Disable the watchdog.
+- */
+-static inline void at32_wdt_stop(void)
+-{
+-	unsigned long psel;
+-
+-	spin_lock(&wdt->io_lock);
+-	psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f);
+-	wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55));
+-	wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa));
+-	spin_unlock(&wdt->io_lock);
+-}
+-
+-/*
+- * Enable and reset the watchdog.
+- */
+-static inline void at32_wdt_start(void)
+-{
+-	/* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
+-	unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe;
+-
+-	spin_lock(&wdt->io_lock);
+-	wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
+-			| WDT_BF(CTRL_PSEL, psel)
+-			| WDT_BF(CTRL_KEY, 0x55));
+-	wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
+-			| WDT_BF(CTRL_PSEL, psel)
+-			| WDT_BF(CTRL_KEY, 0xaa));
+-	spin_unlock(&wdt->io_lock);
+-}
+-
+-/*
+- * Pat the watchdog timer.
+- */
+-static inline void at32_wdt_pat(void)
+-{
+-	spin_lock(&wdt->io_lock);
+-	wdt_writel(wdt, CLR, 0x42);
+-	spin_unlock(&wdt->io_lock);
+-}
+-
+-/*
+- * Watchdog device is opened, and watchdog starts running.
+- */
+-static int at32_wdt_open(struct inode *inode, struct file *file)
+-{
+-	if (test_and_set_bit(1, &wdt->users))
+-		return -EBUSY;
+-
+-	at32_wdt_start();
+-	return nonseekable_open(inode, file);
+-}
+-
+-/*
+- * Close the watchdog device.
+- */
+-static int at32_wdt_close(struct inode *inode, struct file *file)
+-{
+-	if (expect_release == 42) {
+-		at32_wdt_stop();
+-	} else {
+-		dev_dbg(wdt->miscdev.parent,
+-			"unexpected close, not stopping watchdog!\n");
+-		at32_wdt_pat();
+-	}
+-	clear_bit(1, &wdt->users);
+-	expect_release = 0;
+-	return 0;
+-}
+-
+-/*
+- * Change the watchdog time interval.
+- */
+-static int at32_wdt_settimeout(int time)
+-{
+-	/*
+-	 * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is
+-	 * 2 ^ 16 allowing up to 2 seconds timeout.
+-	 */
+-	if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX))
+-		return -EINVAL;
+-
+-	/*
+-	 * Set new watchdog time. It will be used when at32_wdt_start() is
+-	 * called.
+-	 */
+-	wdt->timeout = time;
+-	return 0;
+-}
+-
+-/*
+- * Get the watchdog status.
+- */
+-static int at32_wdt_get_status(void)
+-{
+-	int rcause;
+-	int status = 0;
+-
+-	rcause = wdt_readl(wdt, RCAUSE);
+-
+-	switch (rcause) {
+-	case WDT_BIT(RCAUSE_EXT):
+-		status = WDIOF_EXTERN1;
+-		break;
+-	case WDT_BIT(RCAUSE_WDT):
+-		status = WDIOF_CARDRESET;
+-		break;
+-	case WDT_BIT(RCAUSE_POR):  /* fall through */
+-	case WDT_BIT(RCAUSE_JTAG): /* fall through */
+-	case WDT_BIT(RCAUSE_SERP): /* fall through */
+-	default:
+-		break;
+-	}
+-
+-	return status;
+-}
+-
+-static struct watchdog_info at32_wdt_info = {
+-	.identity	= "at32ap700x watchdog",
+-	.options	= WDIOF_SETTIMEOUT |
+-			  WDIOF_KEEPALIVEPING |
+-			  WDIOF_MAGICCLOSE,
+-};
+-
+-/*
+- * Handle commands from user-space.
+- */
+-static long at32_wdt_ioctl(struct file *file,
+-				unsigned int cmd, unsigned long arg)
+-{
+-	int ret = -ENOTTY;
+-	int time;
+-	void __user *argp = (void __user *)arg;
+-	int __user *p = argp;
+-
+-	switch (cmd) {
+-	case WDIOC_GETSUPPORT:
+-		ret = copy_to_user(argp, &at32_wdt_info,
+-				sizeof(at32_wdt_info)) ? -EFAULT : 0;
+-		break;
+-	case WDIOC_GETSTATUS:
+-		ret = put_user(0, p);
+-		break;
+-	case WDIOC_GETBOOTSTATUS:
+-		ret = put_user(wdt->boot_status, p);
+-		break;
+-	case WDIOC_SETOPTIONS:
+-		ret = get_user(time, p);
+-		if (ret)
+-			break;
+-		if (time & WDIOS_DISABLECARD)
+-			at32_wdt_stop();
+-		if (time & WDIOS_ENABLECARD)
+-			at32_wdt_start();
+-		ret = 0;
+-		break;
+-	case WDIOC_KEEPALIVE:
+-		at32_wdt_pat();
+-		ret = 0;
+-		break;
+-	case WDIOC_SETTIMEOUT:
+-		ret = get_user(time, p);
+-		if (ret)
+-			break;
+-		ret = at32_wdt_settimeout(time);
+-		if (ret)
+-			break;
+-		/* Enable new time value */
+-		at32_wdt_start();
+-		/* fall through */
+-	case WDIOC_GETTIMEOUT:
+-		ret = put_user(wdt->timeout, p);
+-		break;
+-	}
+-
+-	return ret;
+-}
+-
+-static ssize_t at32_wdt_write(struct file *file, const char __user *data,
+-				size_t len, loff_t *ppos)
+-{
+-	/* See if we got the magic character 'V' and reload the timer */
+-	if (len) {
+-		if (!nowayout) {
+-			size_t i;
+-
+-			/*
+-			 * note: just in case someone wrote the magic
+-			 * character five months ago...
+-			 */
+-			expect_release = 0;
+-
+-			/*
+-			 * scan to see whether or not we got the magic
+-			 * character
+-			 */
+-			for (i = 0; i != len; i++) {
+-				char c;
+-				if (get_user(c, data + i))
+-					return -EFAULT;
+-				if (c == 'V')
+-					expect_release = 42;
+-			}
+-		}
+-		/* someone wrote to us, we should pat the watchdog */
+-		at32_wdt_pat();
+-	}
+-	return len;
+-}
+-
+-static const struct file_operations at32_wdt_fops = {
+-	.owner		= THIS_MODULE,
+-	.llseek		= no_llseek,
+-	.unlocked_ioctl	= at32_wdt_ioctl,
+-	.open		= at32_wdt_open,
+-	.release	= at32_wdt_close,
+-	.write		= at32_wdt_write,
+-};
+-
+-static int __init at32_wdt_probe(struct platform_device *pdev)
+-{
+-	struct resource	*regs;
+-	int ret;
+-
+-	if (wdt) {
+-		dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n");
+-		return -EBUSY;
+-	}
+-
+-	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+-	if (!regs) {
+-		dev_dbg(&pdev->dev, "missing mmio resource\n");
+-		return -ENXIO;
+-	}
+-
+-	wdt = kzalloc(sizeof(struct wdt_at32ap700x), GFP_KERNEL);
+-	if (!wdt) {
+-		dev_dbg(&pdev->dev, "no memory for wdt structure\n");
+-		return -ENOMEM;
+-	}
+-
+-	wdt->regs = ioremap(regs->start, regs->end - regs->start + 1);
+-	if (!wdt->regs) {
+-		ret = -ENOMEM;
+-		dev_dbg(&pdev->dev, "could not map I/O memory\n");
+-		goto err_free;
+-	}
+-
+-	spin_lock_init(&wdt->io_lock);
+-	wdt->boot_status = at32_wdt_get_status();
+-
+-	/* Work-around for watchdog silicon errata. */
+-	if (wdt->boot_status & WDIOF_CARDRESET) {
+-		dev_info(&pdev->dev, "CPU must be reset with external "
+-				"reset or POR due to silicon errata.\n");
+-		ret = -EIO;
+-		goto err_iounmap;
+-	} else {
+-		wdt->users = 0;
+-	}
+-	wdt->miscdev.minor = WATCHDOG_MINOR;
+-	wdt->miscdev.name = "watchdog";
+-	wdt->miscdev.fops = &at32_wdt_fops;
+-
+-	if (at32_wdt_settimeout(timeout)) {
+-		at32_wdt_settimeout(TIMEOUT_DEFAULT);
+-		dev_dbg(&pdev->dev,
+-			"default timeout invalid, set to %d sec.\n",
+-			TIMEOUT_DEFAULT);
+-	}
+-
+-	ret = misc_register(&wdt->miscdev);
+-	if (ret) {
+-		dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
+-		goto err_iounmap;
+-	}
+-
+-	platform_set_drvdata(pdev, wdt);
+-	wdt->miscdev.parent = &pdev->dev;
+-	dev_info(&pdev->dev,
+-		"AT32AP700X WDT at 0x%p, timeout %d sec (nowayout=%d)\n",
+-		wdt->regs, wdt->timeout, nowayout);
+-
+-	return 0;
+-
+-err_iounmap:
+-	iounmap(wdt->regs);
+-err_free:
+-	kfree(wdt);
+-	wdt = NULL;
+-	return ret;
+-}
+-
+-static int __exit at32_wdt_remove(struct platform_device *pdev)
+-{
+-	if (wdt && platform_get_drvdata(pdev) == wdt) {
+-		/* Stop the timer before we leave */
+-		if (!nowayout)
+-			at32_wdt_stop();
+-
+-		misc_deregister(&wdt->miscdev);
+-		iounmap(wdt->regs);
+-		kfree(wdt);
+-		wdt = NULL;
+-		platform_set_drvdata(pdev, NULL);
+-	}
+-	return 0;
+-}
+-
+-static void at32_wdt_shutdown(struct platform_device *pdev)
+-{
+-	at32_wdt_stop();
+-}
+-
+-#ifdef CONFIG_PM
+-static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message)
+-{
+-	at32_wdt_stop();
+-	return 0;
+-}
+-
+-static int at32_wdt_resume(struct platform_device *pdev)
+-{
+-	if (wdt->users)
+-		at32_wdt_start();
+-	return 0;
+-}
+-#else
+-#define at32_wdt_suspend NULL
+-#define at32_wdt_resume NULL
+-#endif
+-
+-/* work with hotplug and coldplug */
+-MODULE_ALIAS("platform:at32_wdt");
+-
+-static struct platform_driver at32_wdt_driver = {
+-	.remove		= __exit_p(at32_wdt_remove),
+-	.suspend	= at32_wdt_suspend,
+-	.resume		= at32_wdt_resume,
+-	.driver		= {
+-		.name	= "at32_wdt",
+-		.owner	= THIS_MODULE,
+-	},
+-	.shutdown	= at32_wdt_shutdown,
+-};
+-
+-static int __init at32_wdt_init(void)
+-{
+-	return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe);
+-}
+-module_init(at32_wdt_init);
+-
+-static void __exit at32_wdt_exit(void)
+-{
+-	platform_driver_unregister(&at32_wdt_driver);
+-}
+-module_exit(at32_wdt_exit);
+-
+-MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+-MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X");
+-MODULE_LICENSE("GPL");
+-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+diff --git a/include/linux/Kbuild b/include/linux/Kbuild
+index b68ec09..e69646d 100644
+--- a/include/linux/Kbuild
++++ b/include/linux/Kbuild
+@@ -23,6 +23,7 @@ header-y += atmapi.h
+ header-y += atmarp.h
+ header-y += atmbr2684.h
+ header-y += atmclip.h
++header-y += atmel_mpopfb.h
+ header-y += atm_eni.h
+ header-y += atm_he.h
+ header-y += atm_idt77105.h
+diff --git a/include/linux/atmel_mpopfb.h b/include/linux/atmel_mpopfb.h
+new file mode 100644
+index 0000000..cd12e16
+--- /dev/null
++++ b/include/linux/atmel_mpopfb.h
+@@ -0,0 +1,112 @@
++/*
++ *  Header file for AT32 MPOP FB Driver
++ *
++ *  Data structure and register user interface
++ *
++ *  Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#ifndef __ATMEL_MPOPFB_H__
++#define __ATMEL_MPOPFB_H__
++
++#include <linux/fb.h>
++#include <linux/ioctl.h>
++
++/* Coefficients for conversion to rgb. */
++struct atmel_mpopfb_rgbconv_coeffs {
++	int r1, r2, r3, r4;
++	int g1, g2, g3, g4;
++	int b1, b2, b3, b4;
++};
++
++struct atmel_mpopfb_baseimg_info {
++	/* Position of the mpop base image
++	   in the image sent to the LCD. */
++	unsigned xpos;
++	unsigned ypos;
++
++	/* The size of the base image after scaling. */
++	unsigned xsize;
++	unsigned ysize;
++
++	/* Signal that we should flip the video. */
++	int flip;
++
++};
++
++enum atmel_mpopfb_overlay_type {
++	ATMEL_MPOPFB_OVERLAY1 = 0,
++	ATMEL_MPOPFB_OVERLAY2 = 1,
++	ATMEL_MPOPFB_CURSOR = 2
++};
++
++struct atmel_mpopfb_overlay_info {
++	/* Position of the mpop overlay image
++	   in the image sent to the LCD. */
++	unsigned xpos;
++	unsigned ypos;
++	/* The size of the overlay image. */
++	unsigned xsize;
++	unsigned ysize;
++	/* Signal which overlay this info is for. */
++	enum atmel_mpopfb_overlay_type overlay;
++	/* Signal if the overlay is enabled. */
++	unsigned enabled;
++};
++
++struct atmel_mpopfb_overlay_palette_entry {
++	unsigned char alpha;
++	unsigned char red;
++	unsigned char green;
++	unsigned char blue;
++};
++
++struct atmel_mpopfb_cursor_palette_entry {
++	unsigned char:6;
++	unsigned char invert:1;
++	unsigned char visible:1;
++	unsigned char red;
++	unsigned char green;
++	unsigned char blue;
++};
++
++struct atmel_mpopfb_overlay_palette {
++	struct atmel_mpopfb_overlay_palette_entry entry[256];
++};
++
++struct atmel_mpopfb_cursor_palette {
++	struct atmel_mpopfb_cursor_palette_entry entry[4];
++};
++
++#define ATMEL_MPOP_FBIOPUT_BASEIMG_INFO        _IOW('x',0,struct atmel_mpopfb_baseimg_info)
++#define ATMEL_MPOP_FBIOGET_BASEIMG_INFO        _IOR('x',1,struct atmel_mpopfb_baseimg_info)
++#define ATMEL_MPOP_FBIOPUT_OVERLAY_INFO        _IOW('x',2,struct atmel_mpopfb_overlay_info)
++#define ATMEL_MPOP_FBIO_CONNECT_TO_LCDC        _IO( 'x',4)
++#define ATMEL_MPOP_FBIO_DISCONNECT_FROM_LCDC   _IO( 'x',5)
++#define ATMEL_MPOP_FBIOPUT_RGBCONV_COEFFS      _IOW('x',6,struct atmel_mpopfb_rgbconv_coeffs)
++#define ATMEL_MPOP_FBIOGET_RGBCONV_COEFFS      _IOR('x',7,struct atmel_mpopfb_rgbconv_coeffs)
++#define ATMEL_MPOP_FBIOPUT_OVERLAY_PALETTE     _IOW('x',8,struct atmel_mpopfb_overlay_palette)
++#define ATMEL_MPOP_FBIOGET_OVERLAY_PALETTE     _IOR('x',9,struct atmel_mpopfb_overlay_palette)
++#define ATMEL_MPOP_FBIOPUT_CURSOR_PALETTE      _IOW('x',10,struct atmel_mpopfb_cursor_palette)
++#define ATMEL_MPOP_FBIOGET_CURSOR_PALETTE      _IOR('x',11,struct atmel_mpopfb_cursor_palette)
++
++#define ATMEL_MPOP_RESIZE_FRAC_BITS 5
++#define ATMEL_MPOP_SCALE_FRAC_DIV(a,b)  ((((a) << ATMEL_MPOP_RESIZE_FRAC_BITS))/(b))
++#define ATMEL_MPOP_CALC_SCALE(from_res,to_res)  ATMEL_MPOP_SCALE_FRAC_DIV(from_res, to_res)
++
++#define ATMEL_MPOP_COEFF_FRAC_BITS 8
++
++#endif
+diff --git a/include/linux/atmel_pdca.h b/include/linux/atmel_pdca.h
+new file mode 100644
+index 0000000..a2ee314
+--- /dev/null
++++ b/include/linux/atmel_pdca.h
+@@ -0,0 +1,120 @@
++/*
++ * Driver for the Atmel PDCA Peripheral DMA Controller
++ *
++ * Copyright (C) 2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ATMEL_PDCA_H
++#define __ATMEL_PDCA_H
++
++#include <linux/dmaengine.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/list.h>
++
++struct pdca_pdata {
++	unsigned int		nr_channels;
++};
++
++struct pdca_slave {
++	struct dma_slave	slave;
++	u8			tx_periph_id;
++	u8			rx_periph_id;
++};
++
++struct pdca_desc {
++	/* This controller does not support hardware descriptors */
++	struct scatterlist	*sg;
++	int			sg_len;
++	u8			reg_width;
++	u8			periph_id;
++
++	struct list_head	desc_node;
++	struct dma_async_tx_descriptor txd;
++};
++
++struct pdca_chan {
++	struct list_head	freelist;
++	struct list_head	queue;
++
++	spinlock_t		lock;
++	void __iomem		*regs;
++
++	struct scatterlist	*cur_sg;
++	struct scatterlist	*next_sg;
++
++	struct tasklet_struct	tasklet;
++
++	dma_cookie_t		completed;
++	struct dma_chan		chan;
++	struct pdca_slave	*pslave;
++	unsigned int		descs_allocated;
++	bool			enabled;
++};
++
++struct pdca_dev {
++	struct clk		*hclk;
++	struct clk		*pclk;
++	struct dma_device	dma;
++	void __iomem		*regs;
++
++	struct pdca_chan	chan[];
++};
++
++static inline struct pdca_slave *dma_to_pdca_slave(struct dma_slave *slave)
++{
++	return container_of(slave, struct pdca_slave, slave);
++}
++
++static inline struct pdca_desc *txd_to_pdca_desc(
++		struct dma_async_tx_descriptor *txd)
++{
++	return container_of(txd, struct pdca_desc, txd);
++}
++
++static inline struct pdca_chan *dma_to_pdca_chan(struct dma_chan *chan)
++{
++	return container_of(chan, struct pdca_chan, chan);
++}
++
++static inline struct pdca_dev *dma_to_pdca_dev(struct dma_device *dma)
++{
++	return container_of(dma, struct pdca_dev, dma);
++}
++
++/* PDCA per-channel register definitions */
++#define PDCA_MAR		0x0000	/* Memory Address */
++#define PDCA_PSR		0x0004	/* Peripheral Select */
++#define PDCA_TCR		0x0008	/* Transfer Counter */
++#define PDCA_MARR		0x000c	/* Memory Address Reload */
++#define PDCA_TCRR		0x0010	/* Transfer Counter Reload */
++#define PDCA_CR			0x0014	/* Control */
++# define PDCA_CR_TEN		(  1 <<  0)	/* Transfer Enable */
++# define PDCA_CR_TDIS		(  1 <<  1)	/* Transfer Disable */
++# define PDCA_CR_ECLR		(  1 <<  8)	/* Error Clear */
++#define PDCA_MR			0x0018	/* Mode */
++# define PDCA_SIZE_BYTE		(  0 <<  0)	/* 8 bits per transfer */
++# define PDCA_SIZE_HWORD	(  1 <<  0)	/* 16 bits per transfer */
++# define PDCA_SIZE_WORD		(  2 <<  0)	/* 32 bits per transfer */
++#define PDCA_SR			0x001c	/* Status */
++# define PDCA_SR_TEN		(  1 <<  0)	/* Transfer Enabled */
++#define PDCA_IER		0x0020	/* Interrupt Enable */
++#define PDCA_IDR		0x0024	/* Interrupt Disable */
++#define PDCA_IMR		0x0028	/* Interrupt Mask */
++#define PDCA_ISR		0x002c	/* Interrupt Status */
++# define PDCA_RCZ		(  1 <<  0)	/* Reload Counter Zero */
++# define PDCA_TRC		(  1 <<  1)	/* Transfer Complete */
++# define PDCA_TERR		(  1 <<  2)	/* Transfer Error */
++
++/* Address space occupied by one channel */
++#define PDCA_CHAN_SIZE		0x40
++
++#define pdca_readl(base, reg)				\
++	__raw_readl((base) + PDCA_##reg)
++#define pdca_writel(base, reg, value)			\
++	__raw_writel((value), (base) + PDCA_##reg)
++
++#endif /* __ATMEL_PDCA_H */
+diff --git a/include/linux/spi/atmel_spi.h b/include/linux/spi/atmel_spi.h
+new file mode 100644
+index 0000000..88ae568
+--- /dev/null
++++ b/include/linux/spi/atmel_spi.h
+@@ -0,0 +1,20 @@
++/*
++ * Driver for Atmel AT32 and AT91 SPI Controllers
++ *
++ * Copyright (C) 2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __LINUX_SPI_ATMEL_SPI_H
++#define __LINUX_SPI_ATMEL_SPI_H
++
++struct atmel_spi_pdata {
++#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
++	struct dma_slave	*rx_dma_slave;
++	struct dma_slave	*tx_dma_slave;
++#endif
++};
++
++#endif /* __LINUX_SPI_ATMEL_SPI_H */
+diff --git a/include/video/atmel_mpop.h b/include/video/atmel_mpop.h
+new file mode 100644
+index 0000000..60270b8
+--- /dev/null
++++ b/include/video/atmel_mpop.h
+@@ -0,0 +1,820 @@
++/*
++ *  Header file for AT32 MPOP Controller
++ *
++ *  Data structure and register user interface
++ *
++ *  Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#ifndef __ATMEL_MPOP_H__
++#define __ATMEL_MPOP_H__
++
++#include <linux/atmel_mpopfb.h>
++
++/* MPOP Controller info data structure */
++struct atmel_mpopfb_info {
++	spinlock_t lock;
++	struct fb_info *info;
++	void __iomem *mmio;
++	unsigned long irq_base;
++	void *slave_base;
++
++	struct platform_device *pdev;
++	struct platform_device *lcdc_pdev;
++	struct clk *mpop_hclk;
++	struct clk *mpop_pclk;
++	unsigned int running;
++	unsigned int connected_to_lcdc;
++	unsigned long lcdc_old_smem_start;
++	unsigned long lcdc_old_bits_per_pixel;
++	struct atmel_mpopfb_baseimg_info baseimg_info;
++	struct atmel_mpopfb_overlay_info overlay_info[3];
++	struct atmel_mpopfb_rgbconv_coeffs rgbconv_coeffs;
++};
++
++/* TODO! Clean up these defines.... */
++#define ATMEL_MPOP_B                                                 0
++#define ATMEL_MPOP_B1                                                0
++#define ATMEL_MPOP_B1_MASK                                  0x00000fff
++#define ATMEL_MPOP_B1_OFFSET                                         0
++#define ATMEL_MPOP_B1_SIZE                                          12
++#define ATMEL_MPOP_B2                                               12
++#define ATMEL_MPOP_B2B1                                     0x00000024
++#define ATMEL_MPOP_B2B1_B1                                           0
++#define ATMEL_MPOP_B2B1_B1_MASK                             0x00000fff
++#define ATMEL_MPOP_B2B1_B1_OFFSET                                    0
++#define ATMEL_MPOP_B2B1_B1_SIZE                                     12
++#define ATMEL_MPOP_B2B1_B2                                          12
++#define ATMEL_MPOP_B2B1_B2_MASK                             0x00fff000
++#define ATMEL_MPOP_B2B1_B2_OFFSET                                   12
++#define ATMEL_MPOP_B2B1_B2_SIZE                                     12
++#define ATMEL_MPOP_B2_MASK                                  0x00fff000
++#define ATMEL_MPOP_B2_OFFSET                                        12
++#define ATMEL_MPOP_B2_SIZE                                          12
++#define ATMEL_MPOP_B3                                                0
++#define ATMEL_MPOP_B3_MASK                                  0x00000fff
++#define ATMEL_MPOP_B3_OFFSET                                         0
++#define ATMEL_MPOP_B3_SIZE                                          12
++#define ATMEL_MPOP_B4                                               12
++#define ATMEL_MPOP_B4B3                                     0x00000028
++#define ATMEL_MPOP_B4B3_B3                                           0
++#define ATMEL_MPOP_B4B3_B3_MASK                             0x00000fff
++#define ATMEL_MPOP_B4B3_B3_OFFSET                                    0
++#define ATMEL_MPOP_B4B3_B3_SIZE                                     12
++#define ATMEL_MPOP_B4B3_B4                                          12
++#define ATMEL_MPOP_B4B3_B4_MASK                             0xfffff000
++#define ATMEL_MPOP_B4B3_B4_OFFSET                                   12
++#define ATMEL_MPOP_B4B3_B4_SIZE                                     20
++#define ATMEL_MPOP_B4_MASK                                  0xfffff000
++#define ATMEL_MPOP_B4_OFFSET                                        12
++#define ATMEL_MPOP_B4_SIZE                                          20
++#define ATMEL_MPOP_BGCOLOR                                  0x00000090
++#define ATMEL_MPOP_BGCOLOR_BGCOLOR                                   0
++#define ATMEL_MPOP_BGCOLOR_BGCOLOR_MASK                     0xffffffff
++#define ATMEL_MPOP_BGCOLOR_BGCOLOR_OFFSET                            0
++#define ATMEL_MPOP_BGCOLOR_BGCOLOR_SIZE                             32
++#define ATMEL_MPOP_BGCOLOR_MASK                             0xffffffff
++#define ATMEL_MPOP_BGCOLOR_OFFSET                                    0
++#define ATMEL_MPOP_BGCOLOR_SIZE                                     32
++#define ATMEL_MPOP_BGR                                               6
++#define ATMEL_MPOP_BGR_MASK                                 0x00000040
++#define ATMEL_MPOP_BGR_OFFSET                                        6
++#define ATMEL_MPOP_BGR_SIZE                                          1
++#define ATMEL_MPOP_B_MASK                                   0x000000ff
++#define ATMEL_MPOP_B_OFFSET                                          0
++#define ATMEL_MPOP_B_SIZE                                            8
++#define ATMEL_MPOP_CACHEDIS                                          8
++#define ATMEL_MPOP_CACHEDIS_MASK                            0x00000100
++#define ATMEL_MPOP_CACHEDIS_OFFSET                                   8
++#define ATMEL_MPOP_CACHEDIS_SIZE                                     1
++#define ATMEL_MPOP_CR                                       0x00000000
++#define ATMEL_MPOP_CR_CACHEDIS                                       8
++#define ATMEL_MPOP_CR_CACHEDIS_MASK                         0x00000100
++#define ATMEL_MPOP_CR_CACHEDIS_OFFSET                                8
++#define ATMEL_MPOP_CR_CACHEDIS_SIZE                                  1
++#define ATMEL_MPOP_CR_EN                                             0
++#define ATMEL_MPOP_CR_EN_MASK                               0x00000001
++#define ATMEL_MPOP_CR_EN_OFFSET                                      0
++#define ATMEL_MPOP_CR_EN_SIZE                                        1
++#define ATMEL_MPOP_CR_OUT_BGR                                        3
++#define ATMEL_MPOP_CR_OUT_BGR_MASK                          0x00000008
++#define ATMEL_MPOP_CR_OUT_BGR_OFFSET                                 3
++#define ATMEL_MPOP_CR_OUT_BGR_SIZE                                   1
++#define ATMEL_MPOP_CR_OUT_CTRL                                       2
++#define ATMEL_MPOP_CR_OUT_CTRL_MASK                         0x00000004
++#define ATMEL_MPOP_CR_OUT_CTRL_OFFSET                                2
++#define ATMEL_MPOP_CR_OUT_CTRL_SIZE                                  1
++#define ATMEL_MPOP_CR_START                                          1
++#define ATMEL_MPOP_CR_START_MASK                            0x00000002
++#define ATMEL_MPOP_CR_START_OFFSET                                   1
++#define ATMEL_MPOP_CR_START_SIZE                                     1
++#define ATMEL_MPOP_CURSOREN                                          0
++#define ATMEL_MPOP_CURSOREN_MASK                            0x00000001
++#define ATMEL_MPOP_CURSOREN_OFFSET                                   0
++#define ATMEL_MPOP_CURSOREN_SIZE                                     1
++#define ATMEL_MPOP_CURSOR_P0                                0x00000080
++#define ATMEL_MPOP_CURSOR_P0_B                                       0
++#define ATMEL_MPOP_CURSOR_P0_B_MASK                         0x000000ff
++#define ATMEL_MPOP_CURSOR_P0_B_OFFSET                                0
++#define ATMEL_MPOP_CURSOR_P0_B_SIZE                                  8
++#define ATMEL_MPOP_CURSOR_P0_G                                       8
++#define ATMEL_MPOP_CURSOR_P0_G_MASK                         0x0000ff00
++#define ATMEL_MPOP_CURSOR_P0_G_OFFSET                                8
++#define ATMEL_MPOP_CURSOR_P0_G_SIZE                                  8
++#define ATMEL_MPOP_CURSOR_P0_INVERT                                 25
++#define ATMEL_MPOP_CURSOR_P0_INVERT_MASK                    0x02000000
++#define ATMEL_MPOP_CURSOR_P0_INVERT_OFFSET                          25
++#define ATMEL_MPOP_CURSOR_P0_INVERT_SIZE                             1
++#define ATMEL_MPOP_CURSOR_P0_R                                      16
++#define ATMEL_MPOP_CURSOR_P0_R_MASK                         0x00ff0000
++#define ATMEL_MPOP_CURSOR_P0_R_OFFSET                               16
++#define ATMEL_MPOP_CURSOR_P0_R_SIZE                                  8
++#define ATMEL_MPOP_CURSOR_P0_VISIBLE                                24
++#define ATMEL_MPOP_CURSOR_P0_VISIBLE_MASK                   0x01000000
++#define ATMEL_MPOP_CURSOR_P0_VISIBLE_OFFSET                         24
++#define ATMEL_MPOP_CURSOR_P0_VISIBLE_SIZE                            1
++#define ATMEL_MPOP_CURSOR_P1                                0x00000084
++#define ATMEL_MPOP_CURSOR_P1_B                                       0
++#define ATMEL_MPOP_CURSOR_P1_B_MASK                         0x000000ff
++#define ATMEL_MPOP_CURSOR_P1_B_OFFSET                                0
++#define ATMEL_MPOP_CURSOR_P1_B_SIZE                                  8
++#define ATMEL_MPOP_CURSOR_P1_G                                       8
++#define ATMEL_MPOP_CURSOR_P1_G_MASK                         0x0000ff00
++#define ATMEL_MPOP_CURSOR_P1_G_OFFSET                                8
++#define ATMEL_MPOP_CURSOR_P1_G_SIZE                                  8
++#define ATMEL_MPOP_CURSOR_P1_INVERT                                 25
++#define ATMEL_MPOP_CURSOR_P1_INVERT_MASK                    0x02000000
++#define ATMEL_MPOP_CURSOR_P1_INVERT_OFFSET                          25
++#define ATMEL_MPOP_CURSOR_P1_INVERT_SIZE                             1
++#define ATMEL_MPOP_CURSOR_P1_R                                      16
++#define ATMEL_MPOP_CURSOR_P1_R_MASK                         0x00ff0000
++#define ATMEL_MPOP_CURSOR_P1_R_OFFSET                               16
++#define ATMEL_MPOP_CURSOR_P1_R_SIZE                                  8
++#define ATMEL_MPOP_CURSOR_P1_VISIBLE                                24
++#define ATMEL_MPOP_CURSOR_P1_VISIBLE_MASK                   0x01000000
++#define ATMEL_MPOP_CURSOR_P1_VISIBLE_OFFSET                         24
++#define ATMEL_MPOP_CURSOR_P1_VISIBLE_SIZE                            1
++#define ATMEL_MPOP_CURSOR_P2                                0x00000088
++#define ATMEL_MPOP_CURSOR_P2_B                                       0
++#define ATMEL_MPOP_CURSOR_P2_B_MASK                         0x000000ff
++#define ATMEL_MPOP_CURSOR_P2_B_OFFSET                                0
++#define ATMEL_MPOP_CURSOR_P2_B_SIZE                                  8
++#define ATMEL_MPOP_CURSOR_P2_G                                       8
++#define ATMEL_MPOP_CURSOR_P2_G_MASK                         0x0000ff00
++#define ATMEL_MPOP_CURSOR_P2_G_OFFSET                                8
++#define ATMEL_MPOP_CURSOR_P2_G_SIZE                                  8
++#define ATMEL_MPOP_CURSOR_P2_INVERT                                 25
++#define ATMEL_MPOP_CURSOR_P2_INVERT_MASK                    0x02000000
++#define ATMEL_MPOP_CURSOR_P2_INVERT_OFFSET                          25
++#define ATMEL_MPOP_CURSOR_P2_INVERT_SIZE                             1
++#define ATMEL_MPOP_CURSOR_P2_R                                      16
++#define ATMEL_MPOP_CURSOR_P2_R_MASK                         0x00ff0000
++#define ATMEL_MPOP_CURSOR_P2_R_OFFSET                               16
++#define ATMEL_MPOP_CURSOR_P2_R_SIZE                                  8
++#define ATMEL_MPOP_CURSOR_P2_VISIBLE                                24
++#define ATMEL_MPOP_CURSOR_P2_VISIBLE_MASK                   0x01000000
++#define ATMEL_MPOP_CURSOR_P2_VISIBLE_OFFSET                         24
++#define ATMEL_MPOP_CURSOR_P2_VISIBLE_SIZE                            1
++#define ATMEL_MPOP_CURSOR_P3                                0x0000008c
++#define ATMEL_MPOP_CURSOR_P3_B                                       0
++#define ATMEL_MPOP_CURSOR_P3_B_MASK                         0x000000ff
++#define ATMEL_MPOP_CURSOR_P3_B_OFFSET                                0
++#define ATMEL_MPOP_CURSOR_P3_B_SIZE                                  8
++#define ATMEL_MPOP_CURSOR_P3_G                                       8
++#define ATMEL_MPOP_CURSOR_P3_G_MASK                         0x0000ff00
++#define ATMEL_MPOP_CURSOR_P3_G_OFFSET                                8
++#define ATMEL_MPOP_CURSOR_P3_G_SIZE                                  8
++#define ATMEL_MPOP_CURSOR_P3_INVERT                                 25
++#define ATMEL_MPOP_CURSOR_P3_INVERT_MASK                    0x02000000
++#define ATMEL_MPOP_CURSOR_P3_INVERT_OFFSET                          25
++#define ATMEL_MPOP_CURSOR_P3_INVERT_SIZE                             1
++#define ATMEL_MPOP_CURSOR_P3_R                                      16
++#define ATMEL_MPOP_CURSOR_P3_R_MASK                         0x00ff0000
++#define ATMEL_MPOP_CURSOR_P3_R_OFFSET                               16
++#define ATMEL_MPOP_CURSOR_P3_R_SIZE                                  8
++#define ATMEL_MPOP_CURSOR_P3_VISIBLE                                24
++#define ATMEL_MPOP_CURSOR_P3_VISIBLE_MASK                   0x01000000
++#define ATMEL_MPOP_CURSOR_P3_VISIBLE_OFFSET                         24
++#define ATMEL_MPOP_CURSOR_P3_VISIBLE_SIZE                            1
++#define ATMEL_MPOP_CURSOR_POS                               0x00000058
++#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X                          11
++#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X_MASK             0x003ff800
++#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X_OFFSET                   11
++#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X_SIZE                     11
++#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y                           0
++#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y_MASK             0x000007ff
++#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y_OFFSET                    0
++#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y_SIZE                     11
++#define ATMEL_MPOP_CURSOR_POS_X                                     11
++#define ATMEL_MPOP_CURSOR_POS_X_MASK                        0x003ff800
++#define ATMEL_MPOP_CURSOR_POS_X_OFFSET                              11
++#define ATMEL_MPOP_CURSOR_POS_X_SIZE                                11
++#define ATMEL_MPOP_CURSOR_POS_Y                                      0
++#define ATMEL_MPOP_CURSOR_POS_Y_MASK                        0x000007ff
++#define ATMEL_MPOP_CURSOR_POS_Y_OFFSET                               0
++#define ATMEL_MPOP_CURSOR_POS_Y_SIZE                                11
++#define ATMEL_MPOP_CURSOR_SAR                               0x00000048
++#define ATMEL_MPOP_CURSOR_SAR_CURSOR_SAR                             0
++#define ATMEL_MPOP_CURSOR_SAR_CURSOR_SAR_MASK               0xffffffff
++#define ATMEL_MPOP_CURSOR_SAR_CURSOR_SAR_OFFSET                      0
++#define ATMEL_MPOP_CURSOR_SAR_CURSOR_SAR_SIZE                       32
++#define ATMEL_MPOP_CURSOR_SAR_MASK                          0xffffffff
++#define ATMEL_MPOP_CURSOR_SAR_OFFSET                                 0
++#define ATMEL_MPOP_CURSOR_SAR_SIZE                                  32
++#define ATMEL_MPOP_CURSOR_SIZE                              0x0000006c
++#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X                        11
++#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X_MASK           0x003ff800
++#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X_OFFSET                 11
++#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X_SIZE                   11
++#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y                         0
++#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y_MASK           0x000007ff
++#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y_OFFSET                  0
++#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y_SIZE                   11
++#define ATMEL_MPOP_CURSOR_SIZE_X                                    11
++#define ATMEL_MPOP_CURSOR_SIZE_X_MASK                       0x003ff800
++#define ATMEL_MPOP_CURSOR_SIZE_X_OFFSET                             11
++#define ATMEL_MPOP_CURSOR_SIZE_X_SIZE                               11
++#define ATMEL_MPOP_CURSOR_SIZE_Y                                     0
++#define ATMEL_MPOP_CURSOR_SIZE_Y_MASK                       0x000007ff
++#define ATMEL_MPOP_CURSOR_SIZE_Y_OFFSET                              0
++#define ATMEL_MPOP_CURSOR_SIZE_Y_SIZE                               11
++#define ATMEL_MPOP_CURSOR_WTC                               0x0000007c
++#define ATMEL_MPOP_CURSOR_WTC_CURSOR_WTC                             0
++#define ATMEL_MPOP_CURSOR_WTC_CURSOR_WTC_MASK               0xffffffff
++#define ATMEL_MPOP_CURSOR_WTC_CURSOR_WTC_OFFSET                      0
++#define ATMEL_MPOP_CURSOR_WTC_CURSOR_WTC_SIZE                       32
++#define ATMEL_MPOP_CURSOR_WTC_MASK                          0xffffffff
++#define ATMEL_MPOP_CURSOR_WTC_OFFSET                                 0
++#define ATMEL_MPOP_CURSOR_WTC_SIZE                                  32
++#define ATMEL_MPOP_DISP_MAX_COORD                           0x00000010
++#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_X                  11
++#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_X_MASK     0x003ff800
++#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_X_OFFSET           11
++#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_X_SIZE             11
++#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_Y                   0
++#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_Y_MASK     0x000007ff
++#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_Y_OFFSET            0
++#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_Y_SIZE             11
++#define ATMEL_MPOP_DISP_MAX_COORD_X                                 11
++#define ATMEL_MPOP_DISP_MAX_COORD_X_MASK                    0x003ff800
++#define ATMEL_MPOP_DISP_MAX_COORD_X_OFFSET                          11
++#define ATMEL_MPOP_DISP_MAX_COORD_X_SIZE                            11
++#define ATMEL_MPOP_DISP_MAX_COORD_Y                                  0
++#define ATMEL_MPOP_DISP_MAX_COORD_Y_MASK                    0x000007ff
++#define ATMEL_MPOP_DISP_MAX_COORD_Y_OFFSET                           0
++#define ATMEL_MPOP_DISP_MAX_COORD_Y_SIZE                            11
++#define ATMEL_MPOP_EN                                                0
++#define ATMEL_MPOP_EN_MASK                                  0x00000001
++#define ATMEL_MPOP_EN_OFFSET                                         0
++#define ATMEL_MPOP_EN_SIZE                                           1
++#define ATMEL_MPOP_EOP                                               3
++#define ATMEL_MPOP_EOP_MASK                                 0x00000008
++#define ATMEL_MPOP_EOP_OFFSET                                        3
++#define ATMEL_MPOP_EOP_SIZE                                          1
++#define ATMEL_MPOP_G                                                 8
++#define ATMEL_MPOP_G1                                                0
++#define ATMEL_MPOP_G1_MASK                                  0x00000fff
++#define ATMEL_MPOP_G1_OFFSET                                         0
++#define ATMEL_MPOP_G1_SIZE                                          12
++#define ATMEL_MPOP_G2                                               12
++#define ATMEL_MPOP_G2G1                                     0x0000001c
++#define ATMEL_MPOP_G2G1_G1                                           0
++#define ATMEL_MPOP_G2G1_G1_MASK                             0x00000fff
++#define ATMEL_MPOP_G2G1_G1_OFFSET                                    0
++#define ATMEL_MPOP_G2G1_G1_SIZE                                     12
++#define ATMEL_MPOP_G2G1_G2                                          12
++#define ATMEL_MPOP_G2G1_G2_MASK                             0x00fff000
++#define ATMEL_MPOP_G2G1_G2_OFFSET                                   12
++#define ATMEL_MPOP_G2G1_G2_SIZE                                     12
++#define ATMEL_MPOP_G2_MASK                                  0x00fff000
++#define ATMEL_MPOP_G2_OFFSET                                        12
++#define ATMEL_MPOP_G2_SIZE                                          12
++#define ATMEL_MPOP_G3                                                0
++#define ATMEL_MPOP_G3_MASK                                  0x00000fff
++#define ATMEL_MPOP_G3_OFFSET                                         0
++#define ATMEL_MPOP_G3_SIZE                                          12
++#define ATMEL_MPOP_G4                                               12
++#define ATMEL_MPOP_G4G3                                     0x00000020
++#define ATMEL_MPOP_G4G3_G3                                           0
++#define ATMEL_MPOP_G4G3_G3_MASK                             0x00000fff
++#define ATMEL_MPOP_G4G3_G3_OFFSET                                    0
++#define ATMEL_MPOP_G4G3_G3_SIZE                                     12
++#define ATMEL_MPOP_G4G3_G4                                          12
++#define ATMEL_MPOP_G4G3_G4_MASK                             0xfffff000
++#define ATMEL_MPOP_G4G3_G4_OFFSET                                   12
++#define ATMEL_MPOP_G4G3_G4_SIZE                                     20
++#define ATMEL_MPOP_G4_MASK                                  0xfffff000
++#define ATMEL_MPOP_G4_OFFSET                                        12
++#define ATMEL_MPOP_G4_SIZE                                          20
++#define ATMEL_MPOP_G_MASK                                   0x0000ff00
++#define ATMEL_MPOP_G_OFFSET                                          8
++#define ATMEL_MPOP_G_SIZE                                            8
++#define ATMEL_MPOP_INTCLEAR                                 0x000000b0
++#define ATMEL_MPOP_INTCLEAR_EOP                                      3
++#define ATMEL_MPOP_INTCLEAR_EOP_MASK                        0x00000008
++#define ATMEL_MPOP_INTCLEAR_EOP_OFFSET                               3
++#define ATMEL_MPOP_INTCLEAR_EOP_SIZE                                 1
++#define ATMEL_MPOP_INTCLEAR_OUT                                      2
++#define ATMEL_MPOP_INTCLEAR_OUT_MASK                        0x00000004
++#define ATMEL_MPOP_INTCLEAR_OUT_OFFSET                               2
++#define ATMEL_MPOP_INTCLEAR_OUT_SIZE                                 1
++#define ATMEL_MPOP_INTCLEAR_OVERLAY                                  1
++#define ATMEL_MPOP_INTCLEAR_OVERLAY_MASK                    0x00000002
++#define ATMEL_MPOP_INTCLEAR_OVERLAY_OFFSET                           1
++#define ATMEL_MPOP_INTCLEAR_OVERLAY_SIZE                             1
++#define ATMEL_MPOP_INTCLEAR_SOP                                      4
++#define ATMEL_MPOP_INTCLEAR_SOP_MASK                        0x00000010
++#define ATMEL_MPOP_INTCLEAR_SOP_OFFSET                               4
++#define ATMEL_MPOP_INTCLEAR_SOP_SIZE                                 1
++#define ATMEL_MPOP_INTCLEAR_YUV                                      0
++#define ATMEL_MPOP_INTCLEAR_YUV_MASK                        0x00000001
++#define ATMEL_MPOP_INTCLEAR_YUV_OFFSET                               0
++#define ATMEL_MPOP_INTCLEAR_YUV_SIZE                                 1
++#define ATMEL_MPOP_INTDIS                                   0x000000a4
++#define ATMEL_MPOP_INTDIS_EOP                                        3
++#define ATMEL_MPOP_INTDIS_EOP_MASK                          0x00000008
++#define ATMEL_MPOP_INTDIS_EOP_OFFSET                                 3
++#define ATMEL_MPOP_INTDIS_EOP_SIZE                                   1
++#define ATMEL_MPOP_INTDIS_OUT                                        2
++#define ATMEL_MPOP_INTDIS_OUT_MASK                          0x00000004
++#define ATMEL_MPOP_INTDIS_OUT_OFFSET                                 2
++#define ATMEL_MPOP_INTDIS_OUT_SIZE                                   1
++#define ATMEL_MPOP_INTDIS_OVERLAY                                    1
++#define ATMEL_MPOP_INTDIS_OVERLAY_MASK                      0x00000002
++#define ATMEL_MPOP_INTDIS_OVERLAY_OFFSET                             1
++#define ATMEL_MPOP_INTDIS_OVERLAY_SIZE                               1
++#define ATMEL_MPOP_INTDIS_SOP                                        4
++#define ATMEL_MPOP_INTDIS_SOP_MASK                          0x00000010
++#define ATMEL_MPOP_INTDIS_SOP_OFFSET                                 4
++#define ATMEL_MPOP_INTDIS_SOP_SIZE                                   1
++#define ATMEL_MPOP_INTDIS_YUV                                        0
++#define ATMEL_MPOP_INTDIS_YUV_MASK                          0x00000001
++#define ATMEL_MPOP_INTDIS_YUV_OFFSET                                 0
++#define ATMEL_MPOP_INTDIS_YUV_SIZE                                   1
++#define ATMEL_MPOP_INTEN                                    0x000000a0
++#define ATMEL_MPOP_INTEN_EOP                                         3
++#define ATMEL_MPOP_INTEN_EOP_MASK                           0x00000008
++#define ATMEL_MPOP_INTEN_EOP_OFFSET                                  3
++#define ATMEL_MPOP_INTEN_EOP_SIZE                                    1
++#define ATMEL_MPOP_INTEN_OUT                                         2
++#define ATMEL_MPOP_INTEN_OUT_MASK                           0x00000004
++#define ATMEL_MPOP_INTEN_OUT_OFFSET                                  2
++#define ATMEL_MPOP_INTEN_OUT_SIZE                                    1
++#define ATMEL_MPOP_INTEN_OVERLAY                                     1
++#define ATMEL_MPOP_INTEN_OVERLAY_MASK                       0x00000002
++#define ATMEL_MPOP_INTEN_OVERLAY_OFFSET                              1
++#define ATMEL_MPOP_INTEN_OVERLAY_SIZE                                1
++#define ATMEL_MPOP_INTEN_SOP                                         4
++#define ATMEL_MPOP_INTEN_SOP_MASK                           0x00000010
++#define ATMEL_MPOP_INTEN_SOP_OFFSET                                  4
++#define ATMEL_MPOP_INTEN_SOP_SIZE                                    1
++#define ATMEL_MPOP_INTEN_YUV                                         0
++#define ATMEL_MPOP_INTEN_YUV_MASK                           0x00000001
++#define ATMEL_MPOP_INTEN_YUV_OFFSET                                  0
++#define ATMEL_MPOP_INTEN_YUV_SIZE                                    1
++#define ATMEL_MPOP_INTMASK                                  0x000000a8
++#define ATMEL_MPOP_INTMASK_EOP                                       3
++#define ATMEL_MPOP_INTMASK_EOP_MASK                         0x00000008
++#define ATMEL_MPOP_INTMASK_EOP_OFFSET                                3
++#define ATMEL_MPOP_INTMASK_EOP_SIZE                                  1
++#define ATMEL_MPOP_INTMASK_OUT                                       2
++#define ATMEL_MPOP_INTMASK_OUT_MASK                         0x00000004
++#define ATMEL_MPOP_INTMASK_OUT_OFFSET                                2
++#define ATMEL_MPOP_INTMASK_OUT_SIZE                                  1
++#define ATMEL_MPOP_INTMASK_OVERLAY                                   1
++#define ATMEL_MPOP_INTMASK_OVERLAY_MASK                     0x00000002
++#define ATMEL_MPOP_INTMASK_OVERLAY_OFFSET                            1
++#define ATMEL_MPOP_INTMASK_OVERLAY_SIZE                              1
++#define ATMEL_MPOP_INTMASK_SOP                                       4
++#define ATMEL_MPOP_INTMASK_SOP_MASK                         0x00000010
++#define ATMEL_MPOP_INTMASK_SOP_OFFSET                                4
++#define ATMEL_MPOP_INTMASK_SOP_SIZE                                  1
++#define ATMEL_MPOP_INTMASK_YUV                                       0
++#define ATMEL_MPOP_INTMASK_YUV_MASK                         0x00000001
++#define ATMEL_MPOP_INTMASK_YUV_OFFSET                                0
++#define ATMEL_MPOP_INTMASK_YUV_SIZE                                  1
++#define ATMEL_MPOP_INTSTATUS                                0x000000ac
++#define ATMEL_MPOP_INTSTATUS_EOP                                     3
++#define ATMEL_MPOP_INTSTATUS_EOP_MASK                       0x00000008
++#define ATMEL_MPOP_INTSTATUS_EOP_OFFSET                              3
++#define ATMEL_MPOP_INTSTATUS_EOP_SIZE                                1
++#define ATMEL_MPOP_INTSTATUS_OUT                                     2
++#define ATMEL_MPOP_INTSTATUS_OUT_MASK                       0x00000004
++#define ATMEL_MPOP_INTSTATUS_OUT_OFFSET                              2
++#define ATMEL_MPOP_INTSTATUS_OUT_SIZE                                1
++#define ATMEL_MPOP_INTSTATUS_OVERLAY                                 1
++#define ATMEL_MPOP_INTSTATUS_OVERLAY_MASK                   0x00000002
++#define ATMEL_MPOP_INTSTATUS_OVERLAY_OFFSET                          1
++#define ATMEL_MPOP_INTSTATUS_OVERLAY_SIZE                            1
++#define ATMEL_MPOP_INTSTATUS_SOP                                     4
++#define ATMEL_MPOP_INTSTATUS_SOP_MASK                       0x00000010
++#define ATMEL_MPOP_INTSTATUS_SOP_OFFSET                              4
++#define ATMEL_MPOP_INTSTATUS_SOP_SIZE                                1
++#define ATMEL_MPOP_INTSTATUS_YUV                                     0
++#define ATMEL_MPOP_INTSTATUS_YUV_MASK                       0x00000001
++#define ATMEL_MPOP_INTSTATUS_YUV_OFFSET                              0
++#define ATMEL_MPOP_INTSTATUS_YUV_SIZE                                1
++#define ATMEL_MPOP_INVERT                                           25
++#define ATMEL_MPOP_INVERT_MASK                              0x02000000
++#define ATMEL_MPOP_INVERT_OFFSET                                    25
++#define ATMEL_MPOP_INVERT_SIZE                                       1
++#define ATMEL_MPOP_MSTR_PTR                                 0x0000000c
++#define ATMEL_MPOP_MSTR_PTR_MASK                            0xffffffff
++#define ATMEL_MPOP_MSTR_PTR_MSTR_PTR                                 0
++#define ATMEL_MPOP_MSTR_PTR_MSTR_PTR_MASK                   0xffffffff
++#define ATMEL_MPOP_MSTR_PTR_MSTR_PTR_OFFSET                          0
++#define ATMEL_MPOP_MSTR_PTR_MSTR_PTR_SIZE                           32
++#define ATMEL_MPOP_MSTR_PTR_OFFSET                                   0
++#define ATMEL_MPOP_MSTR_PTR_SIZE                                    32
++#define ATMEL_MPOP_O1EN                                              1
++#define ATMEL_MPOP_O1EN_MASK                                0x00000002
++#define ATMEL_MPOP_O1EN_OFFSET                                       1
++#define ATMEL_MPOP_O1EN_SIZE                                         1
++#define ATMEL_MPOP_O1_POS                                   0x00000050
++#define ATMEL_MPOP_O1_POS_O1_POS_X                                  11
++#define ATMEL_MPOP_O1_POS_O1_POS_X_MASK                     0x003ff800
++#define ATMEL_MPOP_O1_POS_O1_POS_X_OFFSET                           11
++#define ATMEL_MPOP_O1_POS_O1_POS_X_SIZE                             11
++#define ATMEL_MPOP_O1_POS_O1_POS_Y                                   0
++#define ATMEL_MPOP_O1_POS_O1_POS_Y_MASK                     0x000007ff
++#define ATMEL_MPOP_O1_POS_O1_POS_Y_OFFSET                            0
++#define ATMEL_MPOP_O1_POS_O1_POS_Y_SIZE                             11
++#define ATMEL_MPOP_O1_POS_X                                         11
++#define ATMEL_MPOP_O1_POS_X_MASK                            0x003ff800
++#define ATMEL_MPOP_O1_POS_X_OFFSET                                  11
++#define ATMEL_MPOP_O1_POS_X_SIZE                                    11
++#define ATMEL_MPOP_O1_POS_Y                                          0
++#define ATMEL_MPOP_O1_POS_Y_MASK                            0x000007ff
++#define ATMEL_MPOP_O1_POS_Y_OFFSET                                   0
++#define ATMEL_MPOP_O1_POS_Y_SIZE                                    11
++#define ATMEL_MPOP_O1_SAR                                   0x00000040
++#define ATMEL_MPOP_O1_SAR_MASK                              0xffffffff
++#define ATMEL_MPOP_O1_SAR_O1_SAR                                     0
++#define ATMEL_MPOP_O1_SAR_O1_SAR_MASK                       0xffffffff
++#define ATMEL_MPOP_O1_SAR_O1_SAR_OFFSET                              0
++#define ATMEL_MPOP_O1_SAR_O1_SAR_SIZE                               32
++#define ATMEL_MPOP_O1_SAR_OFFSET                                     0
++#define ATMEL_MPOP_O1_SAR_SIZE                                      32
++#define ATMEL_MPOP_O1_SIZE                                  0x00000064
++#define ATMEL_MPOP_O1_SIZE_O1_SIZE_X                                11
++#define ATMEL_MPOP_O1_SIZE_O1_SIZE_X_MASK                   0x003ff800
++#define ATMEL_MPOP_O1_SIZE_O1_SIZE_X_OFFSET                         11
++#define ATMEL_MPOP_O1_SIZE_O1_SIZE_X_SIZE                           11
++#define ATMEL_MPOP_O1_SIZE_O1_SIZE_Y                                 0
++#define ATMEL_MPOP_O1_SIZE_O1_SIZE_Y_MASK                   0x000007ff
++#define ATMEL_MPOP_O1_SIZE_O1_SIZE_Y_OFFSET                          0
++#define ATMEL_MPOP_O1_SIZE_O1_SIZE_Y_SIZE                           11
++#define ATMEL_MPOP_O1_SIZE_X                                        11
++#define ATMEL_MPOP_O1_SIZE_X_MASK                           0x003ff800
++#define ATMEL_MPOP_O1_SIZE_X_OFFSET                                 11
++#define ATMEL_MPOP_O1_SIZE_X_SIZE                                   11
++#define ATMEL_MPOP_O1_SIZE_Y                                         0
++#define ATMEL_MPOP_O1_SIZE_Y_MASK                           0x000007ff
++#define ATMEL_MPOP_O1_SIZE_Y_OFFSET                                  0
++#define ATMEL_MPOP_O1_SIZE_Y_SIZE                                   11
++#define ATMEL_MPOP_O1_WTC                                   0x00000074
++#define ATMEL_MPOP_O1_WTC_MASK                              0xffffffff
++#define ATMEL_MPOP_O1_WTC_O1_WTC                                     0
++#define ATMEL_MPOP_O1_WTC_O1_WTC_MASK                       0xffffffff
++#define ATMEL_MPOP_O1_WTC_O1_WTC_OFFSET                              0
++#define ATMEL_MPOP_O1_WTC_O1_WTC_SIZE                               32
++#define ATMEL_MPOP_O1_WTC_OFFSET                                     0
++#define ATMEL_MPOP_O1_WTC_SIZE                                      32
++#define ATMEL_MPOP_O2EN                                              2
++#define ATMEL_MPOP_O2EN_MASK                                0x00000004
++#define ATMEL_MPOP_O2EN_OFFSET                                       2
++#define ATMEL_MPOP_O2EN_SIZE                                         1
++#define ATMEL_MPOP_O2_POS                                   0x00000054
++#define ATMEL_MPOP_O2_POS_O2_POS_X                                  11
++#define ATMEL_MPOP_O2_POS_O2_POS_X_MASK                     0x003ff800
++#define ATMEL_MPOP_O2_POS_O2_POS_X_OFFSET                           11
++#define ATMEL_MPOP_O2_POS_O2_POS_X_SIZE                             11
++#define ATMEL_MPOP_O2_POS_O2_POS_Y                                   0
++#define ATMEL_MPOP_O2_POS_O2_POS_Y_MASK                     0x000007ff
++#define ATMEL_MPOP_O2_POS_O2_POS_Y_OFFSET                            0
++#define ATMEL_MPOP_O2_POS_O2_POS_Y_SIZE                             11
++#define ATMEL_MPOP_O2_POS_X                                         11
++#define ATMEL_MPOP_O2_POS_X_MASK                            0x003ff800
++#define ATMEL_MPOP_O2_POS_X_OFFSET                                  11
++#define ATMEL_MPOP_O2_POS_X_SIZE                                    11
++#define ATMEL_MPOP_O2_POS_Y                                          0
++#define ATMEL_MPOP_O2_POS_Y_MASK                            0x000007ff
++#define ATMEL_MPOP_O2_POS_Y_OFFSET                                   0
++#define ATMEL_MPOP_O2_POS_Y_SIZE                                    11
++#define ATMEL_MPOP_O2_SAR                                   0x00000044
++#define ATMEL_MPOP_O2_SAR_MASK                              0xffffffff
++#define ATMEL_MPOP_O2_SAR_O2_SAR                                     0
++#define ATMEL_MPOP_O2_SAR_O2_SAR_MASK                       0xffffffff
++#define ATMEL_MPOP_O2_SAR_O2_SAR_OFFSET                              0
++#define ATMEL_MPOP_O2_SAR_O2_SAR_SIZE                               32
++#define ATMEL_MPOP_O2_SAR_OFFSET                                     0
++#define ATMEL_MPOP_O2_SAR_SIZE                                      32
++#define ATMEL_MPOP_O2_SIZE                                  0x00000068
++#define ATMEL_MPOP_O2_SIZE_O2_SIZE_X                                11
++#define ATMEL_MPOP_O2_SIZE_O2_SIZE_X_MASK                   0x003ff800
++#define ATMEL_MPOP_O2_SIZE_O2_SIZE_X_OFFSET                         11
++#define ATMEL_MPOP_O2_SIZE_O2_SIZE_X_SIZE                           11
++#define ATMEL_MPOP_O2_SIZE_O2_SIZE_Y                                 0
++#define ATMEL_MPOP_O2_SIZE_O2_SIZE_Y_MASK                   0x000007ff
++#define ATMEL_MPOP_O2_SIZE_O2_SIZE_Y_OFFSET                          0
++#define ATMEL_MPOP_O2_SIZE_O2_SIZE_Y_SIZE                           11
++#define ATMEL_MPOP_O2_SIZE_X                                        11
++#define ATMEL_MPOP_O2_SIZE_X_MASK                           0x003ff800
++#define ATMEL_MPOP_O2_SIZE_X_OFFSET                                 11
++#define ATMEL_MPOP_O2_SIZE_X_SIZE                                   11
++#define ATMEL_MPOP_O2_SIZE_Y                                         0
++#define ATMEL_MPOP_O2_SIZE_Y_MASK                           0x000007ff
++#define ATMEL_MPOP_O2_SIZE_Y_OFFSET                                  0
++#define ATMEL_MPOP_O2_SIZE_Y_SIZE                                   11
++#define ATMEL_MPOP_O2_WTC                                   0x00000078
++#define ATMEL_MPOP_O2_WTC_MASK                              0xffffffff
++#define ATMEL_MPOP_O2_WTC_O2_WTC                                     0
++#define ATMEL_MPOP_O2_WTC_O2_WTC_MASK                       0xffffffff
++#define ATMEL_MPOP_O2_WTC_O2_WTC_OFFSET                              0
++#define ATMEL_MPOP_O2_WTC_O2_WTC_SIZE                               32
++#define ATMEL_MPOP_O2_WTC_OFFSET                                     0
++#define ATMEL_MPOP_O2_WTC_SIZE                                      32
++#define ATMEL_MPOP_OCR                                      0x00000008
++#define ATMEL_MPOP_OCR_BGR                                           6
++#define ATMEL_MPOP_OCR_BGR_MASK                             0x00000040
++#define ATMEL_MPOP_OCR_BGR_OFFSET                                    6
++#define ATMEL_MPOP_OCR_BGR_SIZE                                      1
++#define ATMEL_MPOP_OCR_CURSOREN                                      0
++#define ATMEL_MPOP_OCR_CURSOREN_MASK                        0x00000001
++#define ATMEL_MPOP_OCR_CURSOREN_OFFSET                               0
++#define ATMEL_MPOP_OCR_CURSOREN_SIZE                                 1
++#define ATMEL_MPOP_OCR_O1EN                                          1
++#define ATMEL_MPOP_OCR_O1EN_MASK                            0x00000002
++#define ATMEL_MPOP_OCR_O1EN_OFFSET                                   1
++#define ATMEL_MPOP_OCR_O1EN_SIZE                                     1
++#define ATMEL_MPOP_OCR_O2EN                                          2
++#define ATMEL_MPOP_OCR_O2EN_MASK                            0x00000004
++#define ATMEL_MPOP_OCR_O2EN_OFFSET                                   2
++#define ATMEL_MPOP_OCR_O2EN_SIZE                                     1
++#define ATMEL_MPOP_OCR_RGBEN                                         3
++#define ATMEL_MPOP_OCR_RGBEN_MASK                           0x00000008
++#define ATMEL_MPOP_OCR_RGBEN_OFFSET                                  3
++#define ATMEL_MPOP_OCR_RGBEN_SIZE                                    1
++#define ATMEL_MPOP_OCR_RGBFORM                                       5
++#define ATMEL_MPOP_OCR_RGBFORM_MASK                         0x00000020
++#define ATMEL_MPOP_OCR_RGBFORM_OFFSET                                5
++#define ATMEL_MPOP_OCR_RGBFORM_SIZE                                  1
++#define ATMEL_MPOP_OCR_RGBSRC                                        4
++#define ATMEL_MPOP_OCR_RGBSRC_MASK                          0x00000010
++#define ATMEL_MPOP_OCR_RGBSRC_OFFSET                                 4
++#define ATMEL_MPOP_OCR_RGBSRC_SIZE                                   1
++#define ATMEL_MPOP_OUT                                               2
++#define ATMEL_MPOP_OUT_BEAR                                 0x0000009c
++#define ATMEL_MPOP_OUT_BEAR_MASK                            0xffffffff
++#define ATMEL_MPOP_OUT_BEAR_OFFSET                                   0
++#define ATMEL_MPOP_OUT_BEAR_OUT_BEAR                                 0
++#define ATMEL_MPOP_OUT_BEAR_OUT_BEAR_MASK                   0xffffffff
++#define ATMEL_MPOP_OUT_BEAR_OUT_BEAR_OFFSET                          0
++#define ATMEL_MPOP_OUT_BEAR_OUT_BEAR_SIZE                           32
++#define ATMEL_MPOP_OUT_BEAR_SIZE                                    32
++#define ATMEL_MPOP_OUT_BGR                                           3
++#define ATMEL_MPOP_OUT_BGR_MASK                             0x00000008
++#define ATMEL_MPOP_OUT_BGR_OFFSET                                    3
++#define ATMEL_MPOP_OUT_BGR_SIZE                                      1
++#define ATMEL_MPOP_OUT_CTRL                                          2
++#define ATMEL_MPOP_OUT_CTRL_MASK                            0x00000004
++#define ATMEL_MPOP_OUT_CTRL_OFFSET                                   2
++#define ATMEL_MPOP_OUT_CTRL_SIZE                                     1
++#define ATMEL_MPOP_OUT_MASK                                 0x00000004
++#define ATMEL_MPOP_OUT_OFFSET                                        2
++#define ATMEL_MPOP_OUT_SIZE                                          1
++#define ATMEL_MPOP_OVERLAY                                           1
++#define ATMEL_MPOP_OVERLAY_BEAR                             0x00000098
++#define ATMEL_MPOP_OVERLAY_BEAR_MASK                        0xffffffff
++#define ATMEL_MPOP_OVERLAY_BEAR_OFFSET                               0
++#define ATMEL_MPOP_OVERLAY_BEAR_OVERLAY_BEAR                         0
++#define ATMEL_MPOP_OVERLAY_BEAR_OVERLAY_BEAR_MASK           0xffffffff
++#define ATMEL_MPOP_OVERLAY_BEAR_OVERLAY_BEAR_OFFSET                  0
++#define ATMEL_MPOP_OVERLAY_BEAR_OVERLAY_BEAR_SIZE                   32
++#define ATMEL_MPOP_OVERLAY_BEAR_SIZE                                32
++#define ATMEL_MPOP_OVERLAY_MASK                             0x00000002
++#define ATMEL_MPOP_OVERLAY_OFFSET                                    1
++#define ATMEL_MPOP_OVERLAY_SIZE                                      1
++#define ATMEL_MPOP_PALETTEDATA                              0x00000400
++#define ATMEL_MPOP_R                                                16
++#define ATMEL_MPOP_R1                                                0
++#define ATMEL_MPOP_R1_MASK                                  0x00000fff
++#define ATMEL_MPOP_R1_OFFSET                                         0
++#define ATMEL_MPOP_R1_SIZE                                          12
++#define ATMEL_MPOP_R2                                               12
++#define ATMEL_MPOP_R2R1                                     0x00000014
++#define ATMEL_MPOP_R2R1_R1                                           0
++#define ATMEL_MPOP_R2R1_R1_MASK                             0x00000fff
++#define ATMEL_MPOP_R2R1_R1_OFFSET                                    0
++#define ATMEL_MPOP_R2R1_R1_SIZE                                     12
++#define ATMEL_MPOP_R2R1_R2                                          12
++#define ATMEL_MPOP_R2R1_R2_MASK                             0x00fff000
++#define ATMEL_MPOP_R2R1_R2_OFFSET                                   12
++#define ATMEL_MPOP_R2R1_R2_SIZE                                     12
++#define ATMEL_MPOP_R2_MASK                                  0x00fff000
++#define ATMEL_MPOP_R2_OFFSET                                        12
++#define ATMEL_MPOP_R2_SIZE                                          12
++#define ATMEL_MPOP_R3                                                0
++#define ATMEL_MPOP_R3_MASK                                  0x00000fff
++#define ATMEL_MPOP_R3_OFFSET                                         0
++#define ATMEL_MPOP_R3_SIZE                                          12
++#define ATMEL_MPOP_R4                                               12
++#define ATMEL_MPOP_R4R3                                     0x00000018
++#define ATMEL_MPOP_R4R3_R3                                           0
++#define ATMEL_MPOP_R4R3_R3_MASK                             0x00000fff
++#define ATMEL_MPOP_R4R3_R3_OFFSET                                    0
++#define ATMEL_MPOP_R4R3_R3_SIZE                                     12
++#define ATMEL_MPOP_R4R3_R4                                          12
++#define ATMEL_MPOP_R4R3_R4_MASK                             0xfffff000
++#define ATMEL_MPOP_R4R3_R4_OFFSET                                   12
++#define ATMEL_MPOP_R4R3_R4_SIZE                                     20
++#define ATMEL_MPOP_R4_MASK                                  0xfffff000
++#define ATMEL_MPOP_R4_OFFSET                                        12
++#define ATMEL_MPOP_R4_SIZE                                          20
++#define ATMEL_MPOP_RGBEN                                             3
++#define ATMEL_MPOP_RGBEN_MASK                               0x00000008
++#define ATMEL_MPOP_RGBEN_OFFSET                                      3
++#define ATMEL_MPOP_RGBEN_SIZE                                        1
++#define ATMEL_MPOP_RGBFORM                                           5
++#define ATMEL_MPOP_RGBFORM_MASK                             0x00000020
++#define ATMEL_MPOP_RGBFORM_OFFSET                                    5
++#define ATMEL_MPOP_RGBFORM_SIZE                                      1
++#define ATMEL_MPOP_RGBSRC                                            4
++#define ATMEL_MPOP_RGBSRC_MASK                              0x00000010
++#define ATMEL_MPOP_RGBSRC_OFFSET                                     4
++#define ATMEL_MPOP_RGBSRC_SIZE                                       1
++#define ATMEL_MPOP_RGB_POS                                  0x0000004c
++#define ATMEL_MPOP_RGB_POS_RGB_POS_X                                11
++#define ATMEL_MPOP_RGB_POS_RGB_POS_X_MASK                   0x003ff800
++#define ATMEL_MPOP_RGB_POS_RGB_POS_X_OFFSET                         11
++#define ATMEL_MPOP_RGB_POS_RGB_POS_X_SIZE                           11
++#define ATMEL_MPOP_RGB_POS_RGB_POS_Y                                 0
++#define ATMEL_MPOP_RGB_POS_RGB_POS_Y_MASK                   0x000007ff
++#define ATMEL_MPOP_RGB_POS_RGB_POS_Y_OFFSET                          0
++#define ATMEL_MPOP_RGB_POS_RGB_POS_Y_SIZE                           11
++#define ATMEL_MPOP_RGB_POS_X                                        11
++#define ATMEL_MPOP_RGB_POS_X_MASK                           0x003ff800
++#define ATMEL_MPOP_RGB_POS_X_OFFSET                                 11
++#define ATMEL_MPOP_RGB_POS_X_SIZE                                   11
++#define ATMEL_MPOP_RGB_POS_Y                                         0
++#define ATMEL_MPOP_RGB_POS_Y_MASK                           0x000007ff
++#define ATMEL_MPOP_RGB_POS_Y_OFFSET                                  0
++#define ATMEL_MPOP_RGB_POS_Y_SIZE                                   11
++#define ATMEL_MPOP_RGB_SAR                                  0x0000003c
++#define ATMEL_MPOP_RGB_SAR_MASK                             0xffffffff
++#define ATMEL_MPOP_RGB_SAR_OFFSET                                    0
++#define ATMEL_MPOP_RGB_SAR_RGB_SAR                                   0
++#define ATMEL_MPOP_RGB_SAR_RGB_SAR_MASK                     0xffffffff
++#define ATMEL_MPOP_RGB_SAR_RGB_SAR_OFFSET                            0
++#define ATMEL_MPOP_RGB_SAR_RGB_SAR_SIZE                             32
++#define ATMEL_MPOP_RGB_SAR_SIZE                                     32
++#define ATMEL_MPOP_RGB_SIZE                                 0x00000060
++#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_X                              11
++#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_X_MASK                 0x003ff800
++#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_X_OFFSET                       11
++#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_X_SIZE                         11
++#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_Y                               0
++#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_Y_MASK                 0x000007ff
++#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_Y_OFFSET                        0
++#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_Y_SIZE                         11
++#define ATMEL_MPOP_RGB_SIZE_X                                       11
++#define ATMEL_MPOP_RGB_SIZE_X_MASK                          0x003ff800
++#define ATMEL_MPOP_RGB_SIZE_X_OFFSET                                11
++#define ATMEL_MPOP_RGB_SIZE_X_SIZE                                  11
++#define ATMEL_MPOP_RGB_SIZE_Y                                        0
++#define ATMEL_MPOP_RGB_SIZE_Y_MASK                          0x000007ff
++#define ATMEL_MPOP_RGB_SIZE_Y_OFFSET                                 0
++#define ATMEL_MPOP_RGB_SIZE_Y_SIZE                                  11
++#define ATMEL_MPOP_RGB_WTC                                  0x00000070
++#define ATMEL_MPOP_RGB_WTC_MASK                             0xffffffff
++#define ATMEL_MPOP_RGB_WTC_OFFSET                                    0
++#define ATMEL_MPOP_RGB_WTC_RGB_WTC                                   0
++#define ATMEL_MPOP_RGB_WTC_RGB_WTC_MASK                     0xffffffff
++#define ATMEL_MPOP_RGB_WTC_RGB_WTC_OFFSET                            0
++#define ATMEL_MPOP_RGB_WTC_RGB_WTC_SIZE                             32
++#define ATMEL_MPOP_RGB_WTC_SIZE                                     32
++#define ATMEL_MPOP_R_MASK                                   0x00ff0000
++#define ATMEL_MPOP_R_OFFSET                                         16
++#define ATMEL_MPOP_R_SIZE                                            8
++#define ATMEL_MPOP_SOP                                               4
++#define ATMEL_MPOP_SOP_MASK                                 0x00000010
++#define ATMEL_MPOP_SOP_OFFSET                                        4
++#define ATMEL_MPOP_SOP_SIZE                                          1
++#define ATMEL_MPOP_START                                             1
++#define ATMEL_MPOP_START_MASK                               0x00000002
++#define ATMEL_MPOP_START_OFFSET                                      1
++#define ATMEL_MPOP_START_SIZE                                        1
++#define ATMEL_MPOP_STRIDE                                   0x0000002c
++#define ATMEL_MPOP_STRIDE_MASK                              0xffffffff
++#define ATMEL_MPOP_STRIDE_OFFSET                                     0
++#define ATMEL_MPOP_STRIDE_SIZE                                      32
++#define ATMEL_MPOP_STRIDE_STRIDE                                     0
++#define ATMEL_MPOP_STRIDE_STRIDE_MASK                       0xffffffff
++#define ATMEL_MPOP_STRIDE_STRIDE_OFFSET                              0
++#define ATMEL_MPOP_STRIDE_STRIDE_SIZE                               32
++#define ATMEL_MPOP_U_SAR                                    0x00000034
++#define ATMEL_MPOP_U_SAR_MASK                               0xffffffff
++#define ATMEL_MPOP_U_SAR_OFFSET                                      0
++#define ATMEL_MPOP_U_SAR_SIZE                                       32
++#define ATMEL_MPOP_U_SAR_U_SAR                                       0
++#define ATMEL_MPOP_U_SAR_U_SAR_MASK                         0xffffffff
++#define ATMEL_MPOP_U_SAR_U_SAR_OFFSET                                0
++#define ATMEL_MPOP_U_SAR_U_SAR_SIZE                                 32
++#define ATMEL_MPOP_VISIBLE                                          24
++#define ATMEL_MPOP_VISIBLE_MASK                             0x01000000
++#define ATMEL_MPOP_VISIBLE_OFFSET                                   24
++#define ATMEL_MPOP_VISIBLE_SIZE                                      1
++#define ATMEL_MPOP_V_SAR                                    0x00000038
++#define ATMEL_MPOP_V_SAR_MASK                               0xffffffff
++#define ATMEL_MPOP_V_SAR_OFFSET                                      0
++#define ATMEL_MPOP_V_SAR_SIZE                                       32
++#define ATMEL_MPOP_V_SAR_V_SAR                                       0
++#define ATMEL_MPOP_V_SAR_V_SAR_MASK                         0xffffffff
++#define ATMEL_MPOP_V_SAR_V_SAR_OFFSET                                0
++#define ATMEL_MPOP_V_SAR_V_SAR_SIZE                                 32
++#define ATMEL_MPOP_XRESIZE                                          16
++#define ATMEL_MPOP_XRESIZE_MASK                             0x00ff0000
++#define ATMEL_MPOP_XRESIZE_OFFSET                                   16
++#define ATMEL_MPOP_XRESIZE_SIZE                                      8
++#define ATMEL_MPOP_YCR                                      0x00000004
++#define ATMEL_MPOP_YCR_XRESIZE                                      16
++#define ATMEL_MPOP_YCR_XRESIZE_MASK                         0x00ff0000
++#define ATMEL_MPOP_YCR_XRESIZE_OFFSET                               16
++#define ATMEL_MPOP_YCR_XRESIZE_SIZE                                  8
++#define ATMEL_MPOP_YCR_YRESIZE                                       8
++#define ATMEL_MPOP_YCR_YRESIZE_MASK                         0x0000ff00
++#define ATMEL_MPOP_YCR_YRESIZE_OFFSET                                8
++#define ATMEL_MPOP_YCR_YRESIZE_SIZE                                  8
++#define ATMEL_MPOP_YCR_YUVFORMAT                                     0
++#define ATMEL_MPOP_YCR_YUVFORMAT_MASK                       0x00000003
++#define ATMEL_MPOP_YCR_YUVFORMAT_OFFSET                              0
++#define ATMEL_MPOP_YCR_YUVFORMAT_SIZE                                2
++#define ATMEL_MPOP_YCR_YUVFORMAT_YUVFORMAT_420              0x00000002
++#define ATMEL_MPOP_YCR_YUVFORMAT_YUVFORMAT_422              0x00000001
++#define ATMEL_MPOP_YCR_YUVFORMAT_YUVFORMAT_444              0x00000000
++#define ATMEL_MPOP_YRESIZE                                           8
++#define ATMEL_MPOP_YRESIZE_MASK                             0x0000ff00
++#define ATMEL_MPOP_YRESIZE_OFFSET                                    8
++#define ATMEL_MPOP_YRESIZE_SIZE                                      8
++#define ATMEL_MPOP_YUV                                               0
++#define ATMEL_MPOP_YUVFORMAT                                         0
++#define ATMEL_MPOP_YUVFORMAT_420                            0x00000002
++#define ATMEL_MPOP_YUVFORMAT_422                            0x00000001
++#define ATMEL_MPOP_YUVFORMAT_444                            0x00000000
++#define ATMEL_MPOP_YUVFORMAT_MASK                           0x00000003
++#define ATMEL_MPOP_YUVFORMAT_OFFSET                                  0
++#define ATMEL_MPOP_YUVFORMAT_SIZE                                    2
++#define ATMEL_MPOP_YUVFORMAT_YUVFORMAT_420                  0x00000002
++#define ATMEL_MPOP_YUVFORMAT_YUVFORMAT_422                  0x00000001
++#define ATMEL_MPOP_YUVFORMAT_YUVFORMAT_444                  0x00000000
++#define ATMEL_MPOP_YUV_BEAR                                 0x00000094
++#define ATMEL_MPOP_YUV_BEAR_MASK                            0xffffffff
++#define ATMEL_MPOP_YUV_BEAR_OFFSET                                   0
++#define ATMEL_MPOP_YUV_BEAR_SIZE                                    32
++#define ATMEL_MPOP_YUV_BEAR_YUV_BEAR                                 0
++#define ATMEL_MPOP_YUV_BEAR_YUV_BEAR_MASK                   0xffffffff
++#define ATMEL_MPOP_YUV_BEAR_YUV_BEAR_OFFSET                          0
++#define ATMEL_MPOP_YUV_BEAR_YUV_BEAR_SIZE                           32
++#define ATMEL_MPOP_YUV_MASK                                 0x00000001
++#define ATMEL_MPOP_YUV_MAX_COORD                            0x0000005c
++#define ATMEL_MPOP_YUV_MAX_COORD_X                                  11
++#define ATMEL_MPOP_YUV_MAX_COORD_X_MASK                     0x003ff800
++#define ATMEL_MPOP_YUV_MAX_COORD_X_OFFSET                           11
++#define ATMEL_MPOP_YUV_MAX_COORD_X_SIZE                             11
++#define ATMEL_MPOP_YUV_MAX_COORD_Y                                   0
++#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_X                    11
++#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_X_MASK       0x003ff800
++#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_X_OFFSET             11
++#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_X_SIZE               11
++#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_Y                     0
++#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_Y_MASK       0x000007ff
++#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_Y_OFFSET              0
++#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_Y_SIZE               11
++#define ATMEL_MPOP_YUV_MAX_COORD_Y_MASK                     0x000007ff
++#define ATMEL_MPOP_YUV_MAX_COORD_Y_OFFSET                            0
++#define ATMEL_MPOP_YUV_MAX_COORD_Y_SIZE                             11
++#define ATMEL_MPOP_YUV_OFFSET                                        0
++#define ATMEL_MPOP_YUV_SIZE                                          1
++#define ATMEL_MPOP_Y_SAR                                    0x00000030
++#define ATMEL_MPOP_Y_SAR_MASK                               0xffffffff
++#define ATMEL_MPOP_Y_SAR_OFFSET                                      0
++#define ATMEL_MPOP_Y_SAR_SIZE                                       32
++#define ATMEL_MPOP_Y_SAR_Y_SAR                                       0
++#define ATMEL_MPOP_Y_SAR_Y_SAR_MASK                         0xffffffff
++#define ATMEL_MPOP_Y_SAR_Y_SAR_OFFSET                                0
++#define ATMEL_MPOP_Y_SAR_Y_SAR_SIZE                                 32
++
++#endif /* __ATMEL_MPOP_H__ */
+diff --git a/localversion-atmel b/localversion-atmel
+new file mode 100644
+index 0000000..b90deba
+--- /dev/null
++++ b/localversion-atmel
+@@ -0,0 +1 @@
++.atmel.1
diff --git a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-200-avr32-remove.note.gnu.build-id-section.patch b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-200-avr32-remove.note.gnu.build-id-section.patch
new file mode 100644
index 000000000..6921de227
--- /dev/null
+++ b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-200-avr32-remove.note.gnu.build-id-section.patch
@@ -0,0 +1,27 @@
+From 474d77e07d5adfe7976b6f3ed131660867489778 Mon Sep 17 00:00:00 2001
+From: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+Date: Wed, 26 Nov 2008 11:38:35 +0100
+Subject: [PATCH 1/3] avr32: remove .note.gnu.build-id section when making vmlinux.bin
+
+This patch will remove the section .note.gnu.build-id added in binutils
+2.18 from the vmlinux.bin binary. Not removing this section results in a
+huge multiple gigabyte binary and likewize large uImage.
+
+Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+
+diff --git a/arch/avr32/boot/images/Makefile b/arch/avr32/boot/images/Makefile
+index 219720a..1848bf0 100644
+--- a/arch/avr32/boot/images/Makefile
++++ b/arch/avr32/boot/images/Makefile
+@@ -10,7 +10,7 @@ MKIMAGE		:= $(srctree)/scripts/mkuboot.sh
+ 
+ extra-y		:= vmlinux.bin vmlinux.gz
+ 
+-OBJCOPYFLAGS_vmlinux.bin := -O binary
++OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note.gnu.build-id
+ $(obj)/vmlinux.bin: vmlinux FORCE
+ 	$(call if_changed,objcopy)
+ 
+-- 
+1.5.6.3
+
diff --git a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-201-avr32-atmel_mpopfb-disable-debug.patch b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-201-avr32-atmel_mpopfb-disable-debug.patch
new file mode 100644
index 000000000..6cc4b679a
--- /dev/null
+++ b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-201-avr32-atmel_mpopfb-disable-debug.patch
@@ -0,0 +1,23 @@
+From f26e2224d46430ac4f6c0ddeb518f5766ba62b16 Mon Sep 17 00:00:00 2001
+From: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+Date: Wed, 26 Nov 2008 14:10:45 +0100
+Subject: [PATCH 2/3] atmel_mpopfb: remove define DEBUG to disable debug output
+
+Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+
+diff --git a/drivers/video/atmel_mpopfb.c b/drivers/video/atmel_mpopfb.c
+index 0a07f7b..3b4b668 100644
+--- a/drivers/video/atmel_mpopfb.c
++++ b/drivers/video/atmel_mpopfb.c
+@@ -8,8 +8,6 @@
+  * more details.
+  */
+ 
+-#define DEBUG
+-
+ #include <linux/clk.h>
+ #include <linux/delay.h>
+ #include <linux/dma-mapping.h>
+-- 
+1.5.6.3
+
diff --git a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-202-avr32-atmel_mpopfb-add-signal-to-disable-line-caching.patch b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-202-avr32-atmel_mpopfb-add-signal-to-disable-line-caching.patch
new file mode 100644
index 000000000..d09823e3b
--- /dev/null
+++ b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-202-avr32-atmel_mpopfb-add-signal-to-disable-line-caching.patch
@@ -0,0 +1,59 @@
+From 86fd2e3e74a191ae43122ac18f62f5163c577d4b Mon Sep 17 00:00:00 2001
+From: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+Date: Wed, 26 Nov 2008 14:11:59 +0100
+Subject: [PATCH 3/3] atmel_mpopfb: add signal to disable line caching and set correct output
+
+This patch adds a signal to disable line caching, due to an errata in
+silicon revision A. It also sets the output from MPOP to BGR to match
+big endian framebuffer memory.
+
+Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+
+diff --git a/drivers/video/atmel_mpopfb.c b/drivers/video/atmel_mpopfb.c
+index 3b4b668..350303b 100644
+--- a/drivers/video/atmel_mpopfb.c
++++ b/drivers/video/atmel_mpopfb.c
+@@ -313,6 +313,10 @@ static int atmel_mpopfb_check_var(struct fb_var_screeninfo *var,
+ static void atmel_mpopfb_start(struct atmel_mpopfb_info *sinfo)
+ {
+ 	if (!sinfo->running) {
++		unsigned int line_cache_disable =
++			sinfo->baseimg_info.line_cache_disable ?
++			ATMEL_MPOP_CR_CACHEDIS_MASK : 0;
++
+ 		dev_dbg(sinfo->info->device, "  * Starting MPOP.\n");
+ 
+ 		/* Enable all error interrupts. */
+@@ -323,9 +327,9 @@ static void atmel_mpopfb_start(struct atmel_mpopfb_info *sinfo)
+ 		 * reading from the slave interface it will start
+ 		 * generating a frame.
+ 		 */
+-		mpop_writel(sinfo, ATMEL_MPOP_CR,
+-			    ATMEL_MPOP_CR_EN_MASK
+-			    /*| ATMEL_MPOP_CR_OUT_BGR_MASK */ );
++		mpop_writel(sinfo, ATMEL_MPOP_CR, ATMEL_MPOP_CR_EN_MASK
++				| line_cache_disable
++				| ATMEL_MPOP_CR_OUT_BGR_MASK);
+ 
+ 		sinfo->running = 1;
+ 	}
+diff --git a/include/linux/atmel_mpopfb.h b/include/linux/atmel_mpopfb.h
+index cd12e16..d0f2505 100644
+--- a/include/linux/atmel_mpopfb.h
++++ b/include/linux/atmel_mpopfb.h
+@@ -42,9 +42,11 @@ struct atmel_mpopfb_baseimg_info {
+ 	unsigned xsize;
+ 	unsigned ysize;
+ 
+-	/* Signal that we should flip the video. */
++	/* Signal for flipping the video. */
+ 	int flip;
+ 
++	/* Signal for disabling the line cache. */
++	int line_cache_disable;
+ };
+ 
+ enum atmel_mpopfb_overlay_type {
+-- 
+1.5.6.3
+
diff --git a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-203-avr32-fix-arch-header-byteorder.patch b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-203-avr32-fix-arch-header-byteorder.patch
new file mode 100644
index 000000000..ac990f9cd
--- /dev/null
+++ b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-203-avr32-fix-arch-header-byteorder.patch
@@ -0,0 +1,35 @@
+Index: linux-2.6.27.6/arch/avr32/include/asm/byteorder.h
+===================================================================
+--- linux-2.6.27.6.orig/arch/avr32/include/asm/byteorder.h	2008-11-28 16:47:15.000000000 +0100
++++ linux-2.6.27.6/arch/avr32/include/asm/byteorder.h	2008-11-28 16:47:31.000000000 +0100
+@@ -7,8 +7,9 @@
+ #include <asm/types.h>
+ #include <linux/compiler.h>
+ 
+-#define __BIG_ENDIAN
++#define __BIG_ENDIAN 4321
+ #define __SWAB_64_THRU_32__
++#define __BYTEORDER_HAS_U64__
+ 
+ #ifdef __CHECKER__
+ extern unsigned long __builtin_bswap_32(unsigned long x);
+@@ -33,5 +34,5 @@
+ #define __arch_swab32 __arch_swab32
+ #endif
+ 
+-#include <linux/byteorder.h>
++#include <linux/byteorder/big_endian.h>
+ #endif /* __ASM_AVR32_BYTEORDER_H */
+Index: linux-2.6.27.6/arch/avr32/mach-at32ap/include/mach/io.h
+===================================================================
+--- linux-2.6.27.6.orig/arch/avr32/mach-at32ap/include/mach/io.h	2008-11-28 16:47:58.000000000 +0100
++++ linux-2.6.27.6/arch/avr32/mach-at32ap/include/mach/io.h	2008-11-28 16:48:15.000000000 +0100
+@@ -1,7 +1,7 @@
+ #ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
+ #define __ASM_AVR32_ARCH_AT32AP_IO_H
+ 
+-#include <linux/swab.h>
++#include <linux/byteorder/swabb.h>
+ 
+ #if defined(CONFIG_AP700X_32_BIT_SMC)
+ # define __swizzle_addr_b(addr)	(addr ^ 3UL)
diff --git a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-204-avr32-ap700x-fix-det_pin-for-nand-flash.patch b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-204-avr32-ap700x-fix-det_pin-for-nand-flash.patch
new file mode 100644
index 000000000..2392cbb61
--- /dev/null
+++ b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-204-avr32-ap700x-fix-det_pin-for-nand-flash.patch
@@ -0,0 +1,31 @@
+--- a/arch/avr32/boards/atstk1000/atstk1002.c
++++ b/arch/avr32/boards/atstk1000/atstk1002.c
+@@ -99,6 +99,7 @@ static struct mtd_partition *nand_part_i
+ static struct atmel_nand_data atstk1006_nand_data __initdata = {
+ 	.cle		= 21,
+ 	.ale		= 22,
++	.det_pin	= GPIO_PIN_NONE,
+ 	.rdy_pin	= GPIO_PIN_PB(30),
+ 	.enable_pin	= GPIO_PIN_PB(29),
+ 	.partition_info	= nand_part_info,
+--- a/arch/avr32/mach-at32ap/at32ap700x.c
++++ b/arch/avr32/mach-at32ap/at32ap700x.c
+@@ -1969,13 +1969,14 @@ at32_add_device_nand(unsigned int id, st
+ 		goto fail;
+ 
+ 	hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_NAND_ENABLE);
+-	if (data->enable_pin)
++
++	if (gpio_is_valid(data->enable_pin))
+ 		at32_select_gpio(data->enable_pin,
+ 				AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+-	if (data->rdy_pin)
+-		at32_select_gpio(data->rdy_pin, 0);
+-	if (data->det_pin)
++	if (gpio_is_valid(data->det_pin))
+ 		at32_select_gpio(data->det_pin, 0);
++	if (gpio_is_valid(data->rdy_pin))
++		at32_select_gpio(data->rdy_pin, 0);
+ 
+ 	platform_device_add(pdev);
+ 	return pdev;