summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDavid Anders <dave123@abcsinc.com>2006-02-10 18:00:56 +0000
committerDavid Anders <dave123@abcsinc.com>2006-02-10 18:00:56 +0000
commit88671dd3586caaac97d091f7faef63fb44757d55 (patch)
treec2d7929a9e3f7c847fb53beff9c7fa13ee28d3d5
parent32fa323b895141e70e705ac6791e62c7376289bc (diff)
add linux-2.4.32 kernel support for the q5 board per case 0000715
-rw-r--r--target/device/jp/q5/kernel-patches-2.4.32/001-q5342
-rw-r--r--target/device/jp/q5/kernel-patches-2.4.32/005-dp83847162
-rw-r--r--target/device/jp/q5/kernel-patches-2.4.32/006-cfi27
-rw-r--r--target/device/jp/q5/kernel-patches-2.4.32/007-au100013
-rw-r--r--target/device/jp/q5/kernel-patches-2.4.32/008-wbflush14
-rw-r--r--target/device/jp/q5/kernel-patches-2.4.32/100-version11
-rw-r--r--target/device/jp/q5/linux.config60
-rw-r--r--target/device/jp/q5/linux.mk5
-rw-r--r--target/device/jp/q5/uClibc.config.mipsel7
9 files changed, 621 insertions, 20 deletions
diff --git a/target/device/jp/q5/kernel-patches-2.4.32/001-q5 b/target/device/jp/q5/kernel-patches-2.4.32/001-q5
new file mode 100644
index 000000000..1e2718a7a
--- /dev/null
+++ b/target/device/jp/q5/kernel-patches-2.4.32/001-q5
@@ -0,0 +1,342 @@
+diff -Naur linux-2.4.31.org/arch/mips/Makefile linux-2.4.31/arch/mips/Makefile
+--- linux-2.4.31.org/arch/mips/Makefile 2005-01-19 09:09:26.000000000 -0500
++++ linux-2.4.31/arch/mips/Makefile 2005-09-10 17:29:44.000000000 -0400
+@@ -241,6 +241,16 @@
+ endif
+
+ #
++# jp-embedded Q5 board
++#
++ifdef CONFIG_MIPS_Q5
++LIBS += arch/mips/jp-embedded/q5/q5.o \
++ arch/mips/au1000/common/au1000.o
++SUBDIRS += arch/mips/jp-embedded/q5 arch/mips/au1000/common
++LOADADDR := 0x80100000
++endif
++
++#
+ # Au1x00 (AMD/Alchemy) eval boards
+ #
+ ifdef CONFIG_MIPS_DB1000
+diff -Naur linux-2.4.31.org/arch/mips/au1000/common/pci_fixup.c linux-2.4.31/arch/mips/au1000/common/pci_fixup.c
+--- linux-2.4.31.org/arch/mips/au1000/common/pci_fixup.c 2005-01-19 09:09:26.000000000 -0500
++++ linux-2.4.31/arch/mips/au1000/common/pci_fixup.c 2005-09-10 17:47:29.000000000 -0400
+@@ -101,7 +101,7 @@
+
+ void __init pcibios_fixup_irqs(void)
+ {
+-#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
++#if defined( CONFIG_MIPS_PB1500 ) || defined( CONFIG_MIPS_PB1550 )
+ unsigned int slot;
+ unsigned char pin;
+ struct pci_dev *dev;
+diff -Naur linux-2.4.31.org/arch/mips/config-shared.in linux-2.4.31/arch/mips/config-shared.in
+--- linux-2.4.31.org/arch/mips/config-shared.in 2005-01-19 09:09:27.000000000 -0500
++++ linux-2.4.31/arch/mips/config-shared.in 2005-08-23 00:30:32.000000000 -0400
+@@ -31,6 +31,7 @@
+ dep_bool 'Support for Alchemy PB1500 board' CONFIG_MIPS_PB1500 $CONFIG_MIPS32
+ dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32
+ dep_bool 'Support for Alchemy PB1550 board' CONFIG_MIPS_PB1550 $CONFIG_MIPS32
++dep_bool 'Support for jp-embedded Q5 board' CONFIG_MIPS_Q5 $CONFIG_MIPS32
+ dep_bool 'Support for MyCable XXS1500 board' CONFIG_MIPS_XXS1500 $CONFIG_MIPS32
+ dep_bool 'Support for 4G Systems MTX-1 board' CONFIG_MIPS_MTX1 $CONFIG_MIPS32
+ dep_bool 'Support for Cogent CSB250 board' CONFIG_COGENT_CSB250 $CONFIG_MIPS32
+@@ -277,6 +278,12 @@
+ define_bool CONFIG_NONCOHERENT_IO y
+ define_bool CONFIG_PC_KEYB y
+ fi
++if [ "$CONFIG_MIPS_Q5" = "y" ]; then
++ define_bool CONFIG_SOC_AU1X00 y
++ define_bool CONFIG_SOC_AU1500 y
++ define_bool CONFIG_NONCOHERENT_IO y
++ define_bool CONFIG_PC_KEYB y
++fi
+ if [ "$CONFIG_MIPS_DB1000" = "y" ]; then
+ define_bool CONFIG_SOC_AU1X00 y
+ define_bool CONFIG_SOC_AU1000 y
+@@ -729,6 +736,7 @@
+ "$CONFIG_MIPS_PB1000" = "y" -o \
+ "$CONFIG_MIPS_PB1100" = "y" -o \
+ "$CONFIG_MIPS_PB1500" = "y" -o \
++ "$CONFIG_MIPS_Q5" = "y" -o \
+ "$CONFIG_NEC_OSPREY" = "y" -o \
+ "$CONFIG_NEC_EAGLE" = "y" -o \
+ "$CONFIG_NINO" = "y" -o \
+diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/Makefile linux-2.4.31/arch/mips/jp-embedded/q5/Makefile
+--- linux-2.4.31.org/arch/mips/jp-embedded/q5/Makefile 1969-12-31 19:00:00.000000000 -0500
++++ linux-2.4.31/arch/mips/jp-embedded/q5/Makefile 2005-09-10 16:46:20.000000000 -0400
+@@ -0,0 +1,9 @@
++USE_STANDARD_AS_RULE := true
++
++O_TARGET := q5.o
++
++export-objs = init.o
++
++obj-y := init.o board_setup.o irqmap.o
++
++include $(TOPDIR)/Rules.make
+diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/board_setup.c linux-2.4.31/arch/mips/jp-embedded/q5/board_setup.c
+--- linux-2.4.31.org/arch/mips/jp-embedded/q5/board_setup.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-2.4.31/arch/mips/jp-embedded/q5/board_setup.c 2005-08-30 14:46:21.000000000 -0400
+@@ -0,0 +1,97 @@
++/*
++ *
++ * BRIEF MODULE DESCRIPTION
++ * jp-embedded Q5 board setup.
++ *
++ * Author: jp@jp-embedded.com
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/ioport.h>
++#include <linux/mm.h>
++#include <linux/console.h>
++#include <linux/mc146818rtc.h>
++#include <linux/delay.h>
++
++#include <asm/cpu.h>
++#include <asm/bootinfo.h>
++#include <asm/irq.h>
++#include <asm/keyboard.h>
++#include <asm/mipsregs.h>
++#include <asm/reboot.h>
++#include <asm/pgtable.h>
++#include <asm/au1000.h>
++#include <asm/pb1500.h>
++
++#ifdef CONFIG_USB_OHCI
++// Enable the workaround for the OHCI DoneHead
++// register corruption problem.
++#define CONFIG_AU1000_OHCI_FIX
++#endif
++
++#ifdef CONFIG_RTC
++extern struct rtc_ops pb1500_rtc_ops;
++#endif
++
++void board_reset (void)
++{
++ /* Hit BCSR.SYSTEM_CONTROL[SW_RST] obs */
++ au_writel(0x00000000, 0xAE00001C);
++}
++
++void __init board_setup(void)
++{
++ u32 pin_func;
++ u32 sys_freqctrl, sys_clksrc;
++
++#ifdef CONFIG_PCI
++ // Setup PCI bus controller
++ au_writel(0, Au1500_PCI_CMEM);
++ au_writel(0x00003fff, Au1500_CFG_BASE);
++ au_writel(0xf, Au1500_PCI_CFG);
++ au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV);
++ au_writel(0, Au1500_PCI_MWBASE_REV_CCL);
++ au_writel(0x02a00356, Au1500_PCI_STATCMD);
++ au_writel(0x00003c04, Au1500_PCI_HDRTYPE);
++ au_writel(0x00000008, Au1500_PCI_MBAR);
++ au_sync();
++#endif
++
++ /* Enable sys bus clock divider when IDLE state or no bus activity. */
++ au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
++
++#ifdef CONFIG_RTC
++ rtc_ops = &pb1500_rtc_ops;
++ // Enable the RTC if not already enabled
++ if (!(au_readl(0xac000028) & 0x20)) {
++ printk("enabling clock ...\n");
++ au_writel((au_readl(0xac000028) | 0x20), 0xac000028);
++ }
++ // Put the clock in BCD mode
++ if (readl(0xac00002C) & 0x4) { /* reg B */
++ au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c);
++ au_sync();
++ }
++#endif
++}
+diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/init.c linux-2.4.31/arch/mips/jp-embedded/q5/init.c
+--- linux-2.4.31.org/arch/mips/jp-embedded/q5/init.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-2.4.31/arch/mips/jp-embedded/q5/init.c 2005-09-10 16:43:21.000000000 -0400
+@@ -0,0 +1,80 @@
++/*
++ *
++ * BRIEF MODULE DESCRIPTION
++ * jp-embedded Q5 board setup.
++ *
++ * Author: jp@jp-embedded.com
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/sched.h>
++#include <linux/bootmem.h>
++#include <asm/addrspace.h>
++#include <asm/bootinfo.h>
++#include <linux/string.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++
++int prom_argc;
++char **prom_argv, **prom_envp;
++extern void __init prom_init_cmdline(void);
++extern char *prom_getenv(char *envname);
++void (*__wbflush) (void);
++
++void au1500_wbflush(void)
++{
++ __asm__ volatile ("sync");
++}
++
++const char *get_system_type(void)
++{
++ return "jp-embedded Q5";
++}
++
++int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
++{
++ unsigned char *memsize_str;
++ unsigned long memsize;
++
++ prom_argc = argc;
++ prom_argv = argv;
++ prom_envp = envp;
++
++ __wbflush = au1500_wbflush;
++
++ /* obs */
++ mips_machgroup = MACH_GROUP_ALCHEMY;
++ mips_machtype = MACH_PB1500;
++
++ prom_init_cmdline();
++ memsize_str = prom_getenv("memsize");
++ if (!memsize_str) {
++ memsize = 0x04000000;
++ } else {
++ memsize = simple_strtol(memsize_str, NULL, 0);
++ }
++ add_memory_region(0, memsize, BOOT_MEM_RAM);
++ return 0;
++}
++
++EXPORT_SYMBOL(__wbflush);
+diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/irqmap.c linux-2.4.31/arch/mips/jp-embedded/q5/irqmap.c
+--- linux-2.4.31.org/arch/mips/jp-embedded/q5/irqmap.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-2.4.31/arch/mips/jp-embedded/q5/irqmap.c 2005-09-10 16:45:18.000000000 -0400
+@@ -0,0 +1,61 @@
++/*
++ *
++ * BRIEF MODULE DESCRIPTION
++ * jp-embedded Q5 board setup.
++ *
++ * Author: jp@jp-embedded.com
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++#include <linux/kernel_stat.h>
++#include <linux/module.h>
++#include <linux/signal.h>
++#include <linux/sched.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/ioport.h>
++#include <linux/timex.h>
++#include <linux/slab.h>
++#include <linux/random.h>
++#include <linux/delay.h>
++
++#include <asm/bitops.h>
++#include <asm/bootinfo.h>
++#include <asm/io.h>
++#include <asm/mipsregs.h>
++#include <asm/system.h>
++#include <asm/au1000.h>
++
++au1xxx_irq_map_t au1xxx_irq_map[] = {
++ { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
++ { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
++ { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
++ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
++ { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
++ { AU1500_GPIO_206, INTC_INT_FALL_EDGE, 0 },
++ { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
++};
++
++int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
++
+--- linux-2.4.31.org/Documentation/Configure.help 2005-04-03 21:42:19.000000000 -0400
++++ linux-2.4.31/Documentation/Configure.help 2005-09-10 18:50:14.340000000 -0400
+@@ -2197,6 +2197,12 @@
+ MIPS-32-based Baget embedded system. This chipset is better known
+ via the NE2100 cards.
+
++jp-embedded Q5 support
++CONFIG_MIPS_Q5
++ This enables support for jp-embedded's MIPS based boards. The
++ boards uses the AU1500 cpu. For more information about these
++ boards, see <http://www.jp-embedded.com/>.
++
+ Support for DECstations
+ CONFIG_DECSTATION
+ This enables support for DEC's MIPS based workstations. For details
diff --git a/target/device/jp/q5/kernel-patches-2.4.32/005-dp83847 b/target/device/jp/q5/kernel-patches-2.4.32/005-dp83847
new file mode 100644
index 000000000..9d0d80d96
--- /dev/null
+++ b/target/device/jp/q5/kernel-patches-2.4.32/005-dp83847
@@ -0,0 +1,162 @@
+diff -Naur linux-2.4.31.org/drivers/net/au1000_eth.c linux-2.4.31/drivers/net/au1000_eth.c
+--- linux-2.4.31.org/drivers/net/au1000_eth.c 2005-01-19 09:09:56.000000000 -0500
++++ linux-2.4.31/drivers/net/au1000_eth.c 2005-08-22 12:24:31.000000000 -0400
+@@ -595,6 +595,97 @@
+ return 0;
+ }
+
++int ns_83847_reset(struct net_device *dev, int phy_addr)
++ {
++ s16 mii_control, timeout;
++
++ // printk("ns_reset\n");
++ mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
++ mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET);
++ mdelay(1);
++ for (timeout = 100; timeout > 0; --timeout) {
++ mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
++ if ((mii_control & MII_CNTL_RESET) == 0)
++ break;
++ mdelay(1);
++ }
++ if (mii_control & MII_CNTL_RESET) {
++ printk(KERN_ERR "%s PHY reset timeout !\n", dev->name);
++ return -1;
++ }
++ return 0;
++ }
++
++int ns_83847_init(struct net_device *dev, int phy_addr)
++ {
++ s16 data;
++ // printk("ns_init\n");
++
++ /* Stop auto-negotiation */
++ // data = mdio_read(dev, phy_addr, MII_CONTROL);
++ // mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO);
++ // mdio_write(dev, phy_addr, 0, 0x0000);
++ mdio_write(dev, phy_addr, MII_CONTROL, MII_CNTL_F100 /* | MII_CNTL_FDX */);
++
++ /* Set advertisement to 10/100 and Half/Full duplex (full capabilities) */
++ data = mdio_read(dev, phy_addr, MII_ANADV);
++ /* obs PAUSE bit */
++ data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; /* MII_NWAY_T4 not sopported */ ;
++ mdio_write(dev, phy_addr, MII_ANADV, data);
++
++ /* Bypass led stretching? */
++ data = mdio_read(dev, phy_addr, MII_NS_PHYCTRL);
++ data |= MII_NS_PHYCTRL_BP_STRETCH;
++ mdio_write(dev, phy_addr, MII_NS_PHYCTRL, data);
++
++ /* Restart auto-negotiation */
++ data = mdio_read(dev, phy_addr, MII_CONTROL);
++ data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO;
++ mdio_write(dev, phy_addr, MII_CONTROL, data);
++
++ return 0;
++ }
++
++int ns_83847_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed)
++ {
++ u16 mii_data;
++ struct au1000_private *aup;
++
++ if (!dev) {
++ printk(KERN_ERR "ns_83847_status error: NULL dev\n");
++ return -1;
++ }
++ aup = (struct au1000_private *) dev->priv;
++
++ mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS);
++ // printk("ns_status: %04x\n", mii_data);
++ if (mii_data & MII_STAT_LINK) {
++ *link = 1;
++ mii_data = mdio_read(dev, aup->phy_addr, MII_NS_PHYSTS);
++ if (mii_data & MII_NS_PHYSTS_SPEED_10) {
++ *speed = IF_PORT_10BASET;
++ dev->if_port = IF_PORT_10BASET;
++ }
++ else {
++ if (mii_data & MII_NS_PHYSTS_DUPLEX_FULL) {
++ *speed = IF_PORT_100BASEFX;
++ dev->if_port = IF_PORT_100BASEFX;
++ }
++ else {
++ *speed = IF_PORT_100BASETX;
++ dev->if_port = IF_PORT_100BASETX;
++ }
++ }
++
++ }
++ else {
++ *link = 0;
++ *speed = 0;
++ dev->if_port = IF_PORT_UNKNOWN;
++ }
++ return 0;
++ }
++
+ #ifdef CONFIG_MIPS_BOSPORUS
+ int stub_init(struct net_device *dev, int phy_addr)
+ {
+@@ -620,6 +711,12 @@
+ }
+ #endif
+
++struct phy_ops ns_83847_ops = {
++ ns_83847_init,
++ ns_83847_reset,
++ ns_83847_status,
++};
++
+ struct phy_ops bcm_5201_ops = {
+ bcm_5201_init,
+ bcm_5201_reset,
+@@ -679,6 +776,7 @@
+ {"LSI 80227 10/100 BaseT PHY",0x0016,0xf840, &lsi_80227_ops,0},
+ {"Intel LXT971A Dual Speed PHY",0x0013,0x78e2, &lxt971a_ops,0},
+ {"Kendin KS8995M 10/100 BaseT PHY",0x0022,0x1450, &ks8995m_ops,0},
++ {"Natsemi DP83847 PHY", 0x2000, 0x5c30, &ns_83847_ops },
+ #ifdef CONFIG_MIPS_BOSPORUS
+ {"Stub", 0x1234, 0x5678, &stub_ops },
+ #endif
+@@ -872,6 +970,8 @@
+ }
+ }
+ }
++ printk(KERN_ERR "%s: Au1x No MII transceivers found!\n", dev->name);
++ return -1;
+ found:
+
+ #ifdef CONFIG_MIPS_BOSPORUS
+diff -Naur linux-2.4.31.org/drivers/net/au1000_eth.h linux-2.4.31/drivers/net/au1000_eth.h
+--- linux-2.4.31.org/drivers/net/au1000_eth.h 2004-02-18 08:36:31.000000000 -0500
++++ linux-2.4.31/drivers/net/au1000_eth.h 2005-08-22 12:31:37.000000000 -0400
+@@ -86,6 +86,27 @@
+ #define MII_STAT_CAN_TX_FDX 0x4000
+ #define MII_STAT_CAN_T4 0x8000
+
++/* mii registers for NS 83847 */
++#define MII_NS_PHYSTS 0x10
++#define MII_NS_FCSCR 0x14
++#define MII_NS_RECR 0x15
++#define MII_NS_PCSR 0x16
++#define MII_NS_PHYCTRL 0x19
++#define MII_NS_10BTSCR 0x1a
++#define MII_NS_CDCTRL 0x1b
++
++/* MII_NS_PHYSTS bits */
++#define MII_NS_PHYSTS_LINK (1)
++#define MII_NS_PHYSTS_SPEED_10 (1<<1)
++#define MII_NS_PHYSTS_DUPLEX_FULL (1<<2)
++
++/* MII_NS_PHYCTRL bits */
++#define MII_NS_PHYCTRL_BP_STRETCH (1<<8)
++
++/* MII_NS_CDCTRL bits */
++#define MII_NS_CDCTRL_CD_ENABLE (1<<15)
++#define MII_NS_CDCTRL_RISETIME (1<<11)
++#define MII_NS_CDCTRL_FALLTIME (1<<9)
+
+ #define MII_ID1_OUI_LO 0xFC00 /* low bits of OUI mask */
+ #define MII_ID1_MODEL 0x03F0 /* model number */
diff --git a/target/device/jp/q5/kernel-patches-2.4.32/006-cfi b/target/device/jp/q5/kernel-patches-2.4.32/006-cfi
new file mode 100644
index 000000000..5a28bd93f
--- /dev/null
+++ b/target/device/jp/q5/kernel-patches-2.4.32/006-cfi
@@ -0,0 +1,27 @@
+diff -Naur linux-2.4.31.org/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.31/drivers/mtd/chips/cfi_cmdset_0002.c
+--- linux-2.4.31.org/drivers/mtd/chips/cfi_cmdset_0002.c 2004-11-17 06:54:21.000000000 -0500
++++ linux-2.4.31/drivers/mtd/chips/cfi_cmdset_0002.c 2005-08-22 12:14:17.000000000 -0400
+@@ -510,7 +510,7 @@
+ or tells us why it failed. */
+ dq6 = CMD(1<<6);
+ dq5 = CMD(1<<5);
+- timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */
++ timeo = jiffies + (HZ); /* setting timeout to 1s for now */
+
+ oldstatus = cfi_read(map, adr);
+ status = cfi_read(map, adr);
+@@ -950,12 +950,8 @@
+ oldstatus = cfi_read( map, adr );
+ status = cfi_read( map, adr );
+
+- if( ( oldstatus & 0x00FF ) == ( status & 0x00FF ) )
++ if( ( oldstatus & 0x00FF ) != ( status & 0x00FF ) )
+ {
+- printk( "Warning: DQ5 raised while erase operation was in progress, but erase completed OK\n" );
+- }
+- else
+- {
+ /* DQ5 is active so we can do a reset and stop the erase */
+ cfi_write(map, CMD(0xF0), chip->start);
+ printk( KERN_WARNING "Internal flash device timeout occured or write operation was performed while flash was erasing\n" );
+
diff --git a/target/device/jp/q5/kernel-patches-2.4.32/007-au1000 b/target/device/jp/q5/kernel-patches-2.4.32/007-au1000
new file mode 100644
index 000000000..d852ac9f6
--- /dev/null
+++ b/target/device/jp/q5/kernel-patches-2.4.32/007-au1000
@@ -0,0 +1,13 @@
+--- linux-2.4.32_old/arch/mips/au1000/common/clocks.c 2005-01-19 15:09:26.000000000 +0100
++++ linux-2.4.32/arch/mips/au1000/common/clocks.c 2006-01-27 13:51:39.000000000 +0100
+@@ -85,9 +85,7 @@
+ lcd_clock = sys_busclk / 4;
+
+ if (lcd_clock > 50000) /* Epson MAX */
+- printk(__FUNCTION__
+- ": warning: LCD clock too high (%d KHz)\n",
+- lcd_clock);
++ printk("warning: LCD clock too high (%d KHz)\n", lcd_clock);
+ }
+
+ unsigned int get_au1x00_lcd_clock(void)
diff --git a/target/device/jp/q5/kernel-patches-2.4.32/008-wbflush b/target/device/jp/q5/kernel-patches-2.4.32/008-wbflush
new file mode 100644
index 000000000..996b4c666
--- /dev/null
+++ b/target/device/jp/q5/kernel-patches-2.4.32/008-wbflush
@@ -0,0 +1,14 @@
+--- linux-2.4.32_old/include/asm-mips/wbflush.h 2006-01-26 15:16:14.000000000 +0100
++++ linux-2.4.32/include/asm-mips/wbflush.h 2006-01-27 15:25:54.030500656 +0100
+@@ -15,9 +15,8 @@
+
+ #ifdef CONFIG_CPU_HAS_WB
+
+-extern void (*__wbflush)(void);
+-extern void wbflush_setup(void);
+-
++#define __wbflush() { __asm__ volatile ("sync"); }
++
+ #define wbflush() \
+ do { \
+ __sync(); \
diff --git a/target/device/jp/q5/kernel-patches-2.4.32/100-version b/target/device/jp/q5/kernel-patches-2.4.32/100-version
new file mode 100644
index 000000000..c20e6a82d
--- /dev/null
+++ b/target/device/jp/q5/kernel-patches-2.4.32/100-version
@@ -0,0 +1,11 @@
+--- linux/Makefile.orig 2004-08-18 14:17:14.000000000 -0600
++++ linux/Makefile 2004-08-18 14:17:54.000000000 -0600
+@@ -1,7 +1,7 @@
+ VERSION = 2
+ PATCHLEVEL = 4
+ SUBLEVEL = 32
+-EXTRAVERSION =
++EXTRAVERSION =-q5
+
+ KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
+
diff --git a/target/device/jp/q5/linux.config b/target/device/jp/q5/linux.config
index f299cb556..6a1016ef5 100644
--- a/target/device/jp/q5/linux.config
+++ b/target/device/jp/q5/linux.config
@@ -1,5 +1,5 @@
#
-# Automatically generated by make menuconfig: don't edit
+# Automatically generated make config: don't edit
#
CONFIG_MIPS=y
CONFIG_MIPS32=y
@@ -26,11 +26,13 @@ CONFIG_MODULES=y
# CONFIG_MIPS_DB1000 is not set
# CONFIG_MIPS_DB1100 is not set
# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
-CONFIG_MIPS_PB1500=y
+# CONFIG_MIPS_PB1500 is not set
# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+CONFIG_MIPS_Q5=y
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -53,6 +55,8 @@ CONFIG_MIPS_PB1500=y
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MOMENCO_OCELOT_C is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_PMC_BIG_SUR is not set
+# CONFIG_PMC_STRETCH is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
@@ -76,10 +80,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_SOC_AU1X00=y
CONFIG_SOC_AU1500=y
-CONFIG_NEW_TIME_C=y
-CONFIG_PCI=y
-CONFIG_NEW_PCI=y
-CONFIG_PCI_AUTO=y
CONFIG_NONCOHERENT_IO=y
CONFIG_PC_KEYB=y
# CONFIG_MIPS_AU1000 is not set
@@ -120,8 +120,12 @@ CONFIG_CPU_HAS_SYNC=y
# General setup
#
CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_BUILD_ELF64 is not set
CONFIG_NET=y
-CONFIG_PCI_NAMES=y
+CONFIG_PCI=y
+CONFIG_PCI_NEW=y
+CONFIG_PCI_AUTO=y
+# CONFIG_PCI_NAMES is not set
# CONFIG_ISA is not set
# CONFIG_TC is not set
# CONFIG_MCA is not set
@@ -139,6 +143,10 @@ CONFIG_HOTPLUG=y
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
+# CONFIG_HOTPLUG_PCI_PCIE is not set
+# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
@@ -152,6 +160,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_ELF32 is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_OOM_KILLER is not set
+# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
#
@@ -163,6 +172,10 @@ CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CONCAT=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
@@ -202,8 +215,8 @@ CONFIG_MTD_ROM=y
# Mapping drivers for chip access
#
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=18000000
-CONFIG_MTD_PHYSMAP_LEN=2000000
+CONFIG_MTD_PHYSMAP_START=0x18000000
+CONFIG_MTD_PHYSMAP_LEN=0x2000000
CONFIG_MTD_PHYSMAP_BUSWIDTH=4
# CONFIG_MTD_PB1000 is not set
# CONFIG_MTD_PB1500 is not set
@@ -221,6 +234,10 @@ CONFIG_MTD_PHYSMAP_BUSWIDTH=4
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
@@ -254,6 +271,7 @@ CONFIG_MTD_PHYSMAP_BUSWIDTH=4
# CONFIG_CISS_MONITOR_THREAD is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
@@ -338,7 +356,6 @@ CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_IP_NF_NAT_LOCAL is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
@@ -364,13 +381,12 @@ CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
CONFIG_VLAN_8021Q=y
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
#
-# Appletalk devices
+#
#
-# CONFIG_DEV_APPLETALK is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
CONFIG_BRIDGE=m
# CONFIG_X25 is not set
@@ -396,7 +412,7 @@ CONFIG_NET_SCH_RED=m
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
-# CONFIG_NET_SCH_DELAY is not set
+# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
@@ -573,6 +589,11 @@ CONFIG_AIRO=m
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_PCI_HERMES is not set
+
+#
+# Prism54 PCI/PCMCIA GT/Duette Driver - 802.11(a/b/g)
+#
+CONFIG_PRISM54=m
CONFIG_NET_WIRELESS=y
#
@@ -665,6 +686,14 @@ CONFIG_UNIX98_PTY_COUNT=256
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
+
+#
+# Input core support is needed for gameports
+#
+
+#
+# Input core support is needed for joysticks
+#
# CONFIG_QIC02_TAPE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_IPMI_PANIC_EVENT is not set
@@ -681,7 +710,6 @@ CONFIG_UNIX98_PTY_COUNT=256
# CONFIG_AMD_PM768 is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
-# CONFIG_MIPS_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
diff --git a/target/device/jp/q5/linux.mk b/target/device/jp/q5/linux.mk
index 32b8c3d07..127db1ae9 100644
--- a/target/device/jp/q5/linux.mk
+++ b/target/device/jp/q5/linux.mk
@@ -22,7 +22,7 @@
ifneq ($(filter $(TARGETS),linux),)
# Base version of Linux kernel that we need to download
-DOWNLOAD_LINUX_VERSION=2.4.26
+DOWNLOAD_LINUX_VERSION=2.4.32
# Version of Linux kernel AFTER applying all patches
LINUX_VERSION=$(DOWNLOAD_LINUX_VERSION)-q5
@@ -53,7 +53,6 @@ LINUX_SITE=http://www.kernel.org/pub/linux/kernel/v2.4
# Used by pcmcia-cs and others
LINUX_SOURCE_DIR=$(LINUX_DIR)
-
$(DL_DIR)/$(LINUX_SOURCE):
-mkdir -p $(DL_DIR)
$(WGET) -P $(DL_DIR) $(LINUX_SITE)/$(LINUX_SOURCE)
@@ -67,6 +66,8 @@ ifneq ($(DOWNLOAD_LINUX_VERSION),$(LINUX_VERSION))
mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX_VERSION) $(BUILD_DIR)/linux-$(LINUX_VERSION)
endif
toolchain/patch-kernel.sh $(LINUX_DIR) $(LINUX_PATCH_DIR)
+ #New versions of binutils does not have -mcpu, but -mtune. -march is not needed because -mips2 is used
+ mv $(LINUX_DIR)/arch/mips/Makefile $(LINUX_DIR)/arch/mips/Makefile.org && sed 's/-mcpu/-mtune/g' < $(LINUX_DIR)/arch/mips/Makefile.org > $(LINUX_DIR)/arch/mips/Makefile
touch $(LINUX_DIR)/.unpacked
$(LINUX_KCONFIG):
diff --git a/target/device/jp/q5/uClibc.config.mipsel b/target/device/jp/q5/uClibc.config.mipsel
index fe1c4ac68..d0fc762a9 100644
--- a/target/device/jp/q5/uClibc.config.mipsel
+++ b/target/device/jp/q5/uClibc.config.mipsel
@@ -43,7 +43,7 @@ ARCH_HAS_MMU=y
UCLIBC_HAS_FLOATS=y
HAS_FPU=y
DO_C99_MATH=y
-KERNEL_SOURCE="/home/jp/buildroot_jp/build_test/toolchain_build_mipsel/linux"
+KERNEL_SOURCE="/mnt/storage1/jp/cvs/q5/sw/build/buildroot/toolchain_build_mipsel/linux"
C_SYMBOL_PREFIX=""
HAVE_DOT_CONFIG=y
@@ -61,6 +61,7 @@ LDSO_LDD_SUPPORT=y
LDSO_CACHE_SUPPORT=y
# LDSO_PRELOAD_FILE_SUPPORT is not set
LDSO_BASE_FILENAME="ld.so"
+LDSO_RUNPATH=y
# DL_FINI_CRT_COMPAT is not set
UCLIBC_CTOR_DTOR=y
# HAS_NO_THREADS is not set
@@ -115,6 +116,7 @@ UCLIBC_HAS_STDIO_BUFSIZ_4096=y
UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
+# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
UCLIBC_HAS_STDIO_GETC_MACRO=y
UCLIBC_HAS_STDIO_PUTC_MACRO=y
UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
@@ -151,8 +153,9 @@ DEVEL_PREFIX="/usr/"
#
# uClibc development/debugging options
#
-CROSS_COMPILER_PREFIX=""
+CROSS_COMPILER_PREFIX="/mnt/storage1/jp/cvs/q5/sw/build/buildroot/build_mipsel/staging_dir/bin/mipsel-linux-uclibc-"
# DODEBUG is not set
+# DODEBUG_PT is not set
# DOASSERTS is not set
# SUPPORT_LD_DEBUG is not set
# SUPPORT_LD_DEBUG_EARLY is not set