Major buildroot facelift, step one.

 -Erik

1 files changed, 0 insertions, 321 deletions

diff --git a/make/gcc-uclibc-3.x.mk b/make/gcc-uclibc-3.x.mk
deleted file mode 100644
index 919f5be9c..000000000
--- a/make/gcc-uclibc-3.x.mk
+++ /dev/null
@@ -1,321 +0,0 @@
-# Makefile for to build a gcc/uClibc toolchain
-#
-# Copyright (C) 2002-2003 Erik Andersen <andersen@uclibc.org>
-# Copyright (C) 2004 Manuel Novoa III <mjn3@uclibc.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-ifneq ($(findstring 2.95,$(GCC_VERSION)),2.95)
-GCC_VERSION:=$(strip $(GCC_VERSION))
-
-#GCC_SITE:=ftp://ftp.gnu.org/gnu/gcc/releases/gcc-$(GCC_VERSION)
-GCC_SITE:=http://mirrors.rcn.net/pub/sourceware/gcc/releases/gcc-$(GCC_VERSION)
-
-#
-# snapshots....
-#GCC_VERSION:=3.3-20031013
-#GCC_SITE:=http://gcc.get-software.com/snapshots/$(GCC_VERSION)
-#
-GCC_SOURCE:=gcc-$(GCC_VERSION).tar.bz2
-GCC_DIR:=$(TOOL_BUILD_DIR)/gcc-$(GCC_VERSION)
-GCC_CAT:=bzcat
-GCC_STRIP_HOST_BINARIES:=true
-
-#############################################################
-#
-# Setup some initial stuff
-#
-#############################################################
-
-ifeq ($(INSTALL_LIBGCJ),true)
-TARGET_LANGUAGES:=c,c++,java
-else
-ifeq ($(INSTALL_LIBSTDCPP),true)
-TARGET_LANGUAGES:=c,c++
-else
-TARGET_LANGUAGES:=c
-endif
-endif
-
-#############################################################
-#
-# build the first pass gcc compiler
-#
-#############################################################
-GCC_BUILD_DIR1:=$(TOOL_BUILD_DIR)/gcc-$(GCC_VERSION)-initial
-
-$(DL_DIR)/$(GCC_SOURCE):
-	mkdir -p $(DL_DIR)
-	$(WGET) -P $(DL_DIR) $(GCC_SITE)/$(GCC_SOURCE)
-
-$(GCC_DIR)/.unpacked: $(DL_DIR)/$(GCC_SOURCE)
-	mkdir -p $(TOOL_BUILD_DIR)
-	$(GCC_CAT) $(DL_DIR)/$(GCC_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
-	touch $(GCC_DIR)/.unpacked
-
-$(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
-	# Apply any files named gcc-*.patch from the source directory to gcc
-	$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR)/gcc/$(GCC_VERSION) \*.patch
-	# Note: The soft float situation has improved considerably with gcc 3.4.x.
-	# We can dispense with the custom spec files, as well as libfloat for the arm case.
-	# However, we still need a patch for arm.  There's a similar patch for gcc 3.3.x
-	# which needs to be integrated so we can kill of libfloat for good, except for
-	# anyone (?) who might still be using gcc 2.95.  mjn3
-ifeq ($(SOFT_FLOAT),true)
-ifeq ("$(strip $(ARCH))","arm")
-	$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR)/gcc/$(GCC_VERSION) arm-softfloat.patch.conditional
-endif
-ifeq ("$(strip $(ARCH))","armeb")
-	$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR)/gcc/$(GCC_VERSION) arm-softfloat.patch.conditional
-endif
-	# Not yet updated to 3.4.1.
-	#ifeq ("$(strip $(ARCH))","i386")
-	#$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR)/gcc i386-gcc-soft-float.patch
-	#endif
-endif
-	touch $(GCC_DIR)/.patched
-
-# The --without-headers option stopped working with gcc 3.0 and has never been
-# # fixed, so we need to actually have working C library header files prior to
-# # the step or libgcc will not build...
-
-$(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.patched
-	mkdir -p $(GCC_BUILD_DIR1)
-	(cd $(GCC_BUILD_DIR1); PATH=$(TARGET_PATH) \
-		$(GCC_DIR)/configure \
-		--prefix=$(STAGING_DIR) \
-		--build=$(GNU_HOST_NAME) \
-		--host=$(GNU_HOST_NAME) \
-		--target=$(REAL_GNU_TARGET_NAME) \
-		--enable-languages=c \
-		--disable-shared \
-		--with-sysroot=$(TOOL_BUILD_DIR)/uClibc_dev/ \
-		--disable-__cxa_atexit \
-		--enable-target-optspace \
-		--with-gnu-ld \
-		$(DISABLE_NLS) \
-		$(MULTILIB) \
-		$(SOFT_FLOAT_CONFIG_OPTION) \
-		$(GCC_WITH_CPU) $(GCC_WITH_ARCH) $(GCC_WITH_TUNE) \
-		$(EXTRA_GCC_CONFIG_OPTIONS));
-	touch $(GCC_BUILD_DIR1)/.configured
-
-$(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured
-	PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR1) all-gcc
-	touch $(GCC_BUILD_DIR1)/.compiled
-
-$(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc: $(GCC_BUILD_DIR1)/.compiled
-	PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR1) install-gcc
-	#rm -f $(STAGING_DIR)/bin/gccbug $(STAGING_DIR)/bin/gcov
-	#rm -rf $(STAGING_DIR)/info $(STAGING_DIR)/man $(STAGING_DIR)/share/doc $(STAGING_DIR)/share/locale
-
-gcc_initial: uclibc-configured binutils $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc
-
-gcc_initial-clean:
-	rm -rf $(GCC_BUILD_DIR1)
-	rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
-
-gcc_initial-dirclean:
-	rm -rf $(GCC_BUILD_DIR1)
-
-#############################################################
-#
-# second pass compiler build.  Build the compiler targeting 
-# the newly built shared uClibc library.
-#
-#############################################################
-#
-# Sigh... I had to rework things because using --with-gxx-include-dir
-# causes issues with include dir search order for g++.  This seems to
-# have something to do with "path translations" and possibly doesn't
-# affect gcc-target.  However, I haven't tested gcc-target yet so no
-# guarantees.  mjn3
-
-GCC_BUILD_DIR2:=$(TOOL_BUILD_DIR)/gcc-$(GCC_VERSION)-final
-$(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.patched $(STAGING_DIR)/lib/libc.a
-	mkdir -p $(GCC_BUILD_DIR2)
-	# Important!  Required for limits.h to be fixed.
-	ln -sf ../include $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/sys-include
-	(cd $(GCC_BUILD_DIR2); PATH=$(TARGET_PATH) \
-		$(GCC_DIR)/configure \
-		--prefix=$(STAGING_DIR) \
-		--build=$(GNU_HOST_NAME) \
-		--host=$(GNU_HOST_NAME) \
-		--target=$(REAL_GNU_TARGET_NAME) \
-		--enable-languages=$(TARGET_LANGUAGES) \
-		--enable-shared \
-		--disable-__cxa_atexit \
-		--enable-target-optspace \
-		--with-gnu-ld \
-		$(DISABLE_NLS) \
-		$(MULTILIB) \
-		$(SOFT_FLOAT_CONFIG_OPTION) \
-		$(GCC_WITH_CPU) $(GCC_WITH_ARCH) $(GCC_WITH_TUNE) \
-		$(GCC_USE_SJLJ_EXCEPTIONS) \
-		$(EXTRA_GCC_CONFIG_OPTIONS));
-	touch $(GCC_BUILD_DIR2)/.configured
-
-$(GCC_BUILD_DIR2)/.compiled: $(GCC_BUILD_DIR2)/.configured
-	PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR2) all
-	touch $(GCC_BUILD_DIR2)/.compiled
-
-$(GCC_BUILD_DIR2)/.installed: $(GCC_BUILD_DIR2)/.compiled
-	PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR2) install
-	# Strip the host binaries
-ifeq ($(GCC_STRIP_HOST_BINARIES),true)
-	-strip --strip-all -R .note -R .comment $(STAGING_DIR)/bin/*
-endif
-	# Set up the symlinks to enable lying about target name.
-	set -e; \
-	(cd $(STAGING_DIR); \
-		ln -sf $(REAL_GNU_TARGET_NAME) $(GNU_TARGET_NAME); \
-		cd bin; \
-		for app in $(REAL_GNU_TARGET_NAME)-* ; do \
-			ln -sf $${app} \
-		   	$(GNU_TARGET_NAME)$${app##$(REAL_GNU_TARGET_NAME)}; \
-		done; \
-	);
-	#
-	# Now for the ugly 3.3.x soft float hack...
-	#
-ifeq ($(SOFT_FLOAT),true)
-ifeq ($(findstring 3.3.,$(GCC_VERSION)),3.3.)
-	# Make sure we have a soft float specs file for this arch
-	if [ ! -f $(SOURCE_DIR)/gcc/$(GCC_VERSION)/specs-$(ARCH)-soft-float ] ; then \
-		echo soft float configured but no specs file for this arch ; \
-		/bin/false ; \
-	fi;
-	# Replace specs file with one that defaults to soft float mode.
-	if [ ! -f $(STAGING_DIR)/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs ] ; then \
-		echo staging dir specs file is missing ; \
-		/bin/false ; \
-	fi;
-	cp $(SOURCE_DIR)/gcc/$(GCC_VERSION)/specs-$(ARCH)-soft-float $(STAGING_DIR)/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
-endif
-endif
-	#
-	# Ok... that's enough of that.
-	#
-	touch $(GCC_BUILD_DIR2)/.installed
-
-$(TARGET_DIR)/lib/libgcc_s.so.1: $(GCC_BUILD_DIR2)/.installed
-	# These are in /lib, so...
-	rm -rf $(TARGET_DIR)/usr/lib/libgcc_s.so*
-	-$(STRIP) $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libgcc_s.so.1
-	-cp -a $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libgcc_s* $(TARGET_DIR)/lib/
-
-gcc: uclibc-configured binutils gcc_initial $(LIBFLOAT_TARGET) uclibc \
-	$(TARGET_DIR)/lib/libgcc_s.so.1 $(GCC_BUILD_DIR2)/.installed $(GCC_TARGETS)
-
-gcc-source: $(DL_DIR)/$(GCC_SOURCE)
-
-gcc-clean:
-	rm -rf $(GCC_BUILD_DIR2)
-	rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
-
-gcc-dirclean:
-	rm -rf $(GCC_BUILD_DIR2)
-
-#############################################################
-#
-# Next build target gcc compiler
-#
-#############################################################
-GCC_BUILD_DIR3:=$(BUILD_DIR)/gcc-$(GCC_VERSION)-target
-
-$(GCC_BUILD_DIR3)/.configured: $(GCC_BUILD_DIR2)/.installed
-	mkdir -p $(GCC_BUILD_DIR3)
-	(cd $(GCC_BUILD_DIR3); PATH=$(TARGET_PATH) \
-		$(GCC_DIR)/configure \
-		--prefix=/usr \
-		--build=$(GNU_HOST_NAME) \
-		--host=$(REAL_GNU_TARGET_NAME) \
-		--target=$(REAL_GNU_TARGET_NAME) \
-		--enable-languages=$(TARGET_LANGUAGES) \
-		--enable-shared \
-		--with-gxx-include-dir=/usr/include/c++ \
-		--disable-__cxa_atexit \
-		--enable-target-optspace \
-		--with-gnu-ld \
-		$(DISABLE_NLS) \
-		$(MULTILIB) \
-		$(SOFT_FLOAT_CONFIG_OPTION) \
-		$(GCC_WITH_CPU) $(GCC_WITH_ARCH) $(GCC_WITH_TUNE) \
-		$(GCC_USE_SJLJ_EXCEPTIONS) \
-		$(EXTRA_GCC_CONFIG_OPTIONS));
-	touch $(GCC_BUILD_DIR3)/.configured
-
-$(GCC_BUILD_DIR3)/.compiled: $(GCC_BUILD_DIR3)/.configured
-	PATH=$(TARGET_PATH) \
-	$(MAKE) $(JLEVEL) $(TARGET_GCC_ARGS) -C $(GCC_BUILD_DIR3) all
-	touch $(GCC_BUILD_DIR3)/.compiled
-
-#
-# gcc-lib dir changes names to gcc with 3.4.mumble
-#
-ifeq ($(findstring 3.4.,$(GCC_VERSION)),3.4.)
-GCC_LIB_SUBDIR=lib/gcc/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)
-else
-GCC_LIB_SUBDIR=lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)
-endif
-
-$(TARGET_DIR)/usr/bin/gcc: $(GCC_BUILD_DIR3)/.compiled
-	PATH=$(TARGET_PATH) \
-	$(MAKE) $(JLEVEL) DESTDIR=$(TARGET_DIR) -C $(GCC_BUILD_DIR3) install
-	# Remove broken specs file (cross compile flag is set).
-	rm -f $(TARGET_DIR)/usr/$(GCC_LIB_SUBDIR)/specs
-	#
-	# Now for the ugly 3.3.x soft float hack...
-	#
-ifeq ($(SOFT_FLOAT),true)
-ifeq ($(findstring 3.3.,$(GCC_VERSION)),3.3.)
-	# Add a specs file that defaults to soft float mode.
-	cp $(SOURCE_DIR)/gcc/$(GCC_VERSION)/specs-$(ARCH)-soft-float $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
-	# Make sure gcc does not think we are cross compiling
-	$(SED) "s/^1/0/;" $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
-endif
-endif
-	#
-	# Ok... that's enough of that.
-	#
-	-(cd $(TARGET_DIR)/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1)
-	-(cd $(TARGET_DIR)/usr/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1)
-	-(cd $(TARGET_DIR)/usr/$(GCC_LIB_SUBDIR); $(STRIP) cc1 cc1plus collect2 > /dev/null 2>&1)
-	-(cd $(TARGET_DIR)/usr/lib; $(STRIP) libstdc++.so.*.*.* > /dev/null 2>&1)
-	-(cd $(TARGET_DIR)/lib; $(STRIP) libgcc_s.so.*.*.* > /dev/null 2>&1)
-	#
-	rm -f $(TARGET_DIR)/usr/lib/*.la*
-	#rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
-	#	$(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-	# Work around problem of missing syslimits.h
-	@if [ ! -f $(TARGET_DIR)/usr/$(GCC_LIB_SUBDIR)/include/syslimits.h ] ; then \
-		echo "warning: working around missing syslimits.h" ; \
-		cp -f $(STAGING_DIR)/$(GCC_LIB_SUBDIR)/include/syslimits.h \
-			$(TARGET_DIR)/usr/$(GCC_LIB_SUBDIR)/include/ ; \
-	fi
-	# These are in /lib, so...
-	#rm -rf $(TARGET_DIR)/usr/lib/libgcc_s.so*
-	#touch -c $(TARGET_DIR)/usr/bin/gcc
-
-gcc_target: uclibc_target binutils_target $(TARGET_DIR)/usr/bin/gcc
-
-gcc_target-clean:
-	rm -rf $(GCC_BUILD_DIR3)
-	rm -f $(TARGET_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
-
-gcc_target-dirclean:
-	rm -rf $(GCC_BUILD_DIR3)
-
-endif