Bump u-boot to -2009.01-rc3, and add possibility to apply the arch-at91 patches if using an at91

13 files changed, 4180 insertions, 0 deletions

diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-001-at91rm9200.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-001-at91rm9200.patch
new file mode 100644
index 000000000..0445b2329
--- /dev/null
+++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-001-at91rm9200.patch
@@ -0,0 +1,723 @@
+diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/at91_pio.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/at91_pio.h
+--- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/at91_pio.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/at91_pio.h	2009-01-01 14:02:28.000000000 +0100
+@@ -0,0 +1,49 @@
++/*
++ * [origin: Linux kernel include/asm-arm/arch-at91/at91_pio.h]
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * Parallel I/O Controller (PIO) - System peripherals registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_PIO_H
++#define AT91_PIO_H
++
++#define PIO_PER		0x00	/* Enable Register */
++#define PIO_PDR		0x04	/* Disable Register */
++#define PIO_PSR		0x08	/* Status Register */
++#define PIO_OER		0x10	/* Output Enable Register */
++#define PIO_ODR		0x14	/* Output Disable Register */
++#define PIO_OSR		0x18	/* Output Status Register */
++#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
++#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
++#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
++#define PIO_SODR	0x30	/* Set Output Data Register */
++#define PIO_CODR	0x34	/* Clear Output Data Register */
++#define PIO_ODSR	0x38	/* Output Data Status Register */
++#define PIO_PDSR	0x3c	/* Pin Data Status Register */
++#define PIO_IER		0x40	/* Interrupt Enable Register */
++#define PIO_IDR		0x44	/* Interrupt Disable Register */
++#define PIO_IMR		0x48	/* Interrupt Mask Register */
++#define PIO_ISR		0x4c	/* Interrupt Status Register */
++#define PIO_MDER	0x50	/* Multi-driver Enable Register */
++#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
++#define PIO_MDSR	0x58	/* Multi-driver Status Register */
++#define PIO_PUDR	0x60	/* Pull-up Disable Register */
++#define PIO_PUER	0x64	/* Pull-up Enable Register */
++#define PIO_PUSR	0x68	/* Pull-up Status Register */
++#define PIO_ASR		0x70	/* Peripheral A Select Register */
++#define PIO_BSR		0x74	/* Peripheral B Select Register */
++#define PIO_ABSR	0x78	/* AB Status Register */
++#define PIO_OWER	0xa0	/* Output Write Enable Register */
++#define PIO_OWDR	0xa4	/* Output Write Disable Register */
++#define PIO_OWSR	0xa8	/* Output Write Status Register */
++
++#endif
+diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/at91_pmc.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/at91_pmc.h
+--- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/at91_pmc.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/at91_pmc.h	2009-01-01 15:51:28.000000000 +0100
+@@ -0,0 +1,116 @@
++/*
++ * [origin: Linux kernel include/asm-arm/arch-at91/at91_pmc.h]
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * Copyright (C) 2008 Ulf Samuelsson
++ *
++ * Power Management Controller (PMC) - System peripherals registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_PMC_H
++#define AT91_PMC_H
++
++#define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
++#define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
++
++#define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
++#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
++#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
++#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
++#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
++#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
++#define		AT91CAP9_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91CAP9 only] */
++#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
++#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
++#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
++#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
++#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
++#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
++#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
++#define	AT91_PMC_RES_0C		(AT91_PMC + 0x0c)	/* Reserved */
++
++#define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
++#define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
++#define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
++#define	AT91_PMC_RES_1C		(AT91_PMC + 0x1c)	/* Reserved */
++
++
++#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
++#define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
++#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [AT91SAM926x only] */
++#define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
++
++#define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
++#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
++#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
++
++#define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
++#define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
++#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
++#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
++#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
++#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
++#define		AT91_PMC_USBDIV		(3     << 28)		/* USB Divisor (PLLB only) */
++#define			AT91_PMC_USBDIV_1		(0 << 28)
++#define			AT91_PMC_USBDIV_2		(1 << 28)
++#define			AT91_PMC_USBDIV_4		(2 << 28)
++#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
++
++#define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
++#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
++#define			AT91_PMC_CSS_SLOW		(0 << 0)
++#define			AT91_PMC_CSS_MAIN		(1 << 0)
++#define			AT91_PMC_CSS_PLLA		(2 << 0)
++#define			AT91_PMC_CSS_PLLB		(3 << 0)
++#define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
++#define			AT91_PMC_PRES_1			(0 << 2)
++#define			AT91_PMC_PRES_2			(1 << 2)
++#define			AT91_PMC_PRES_4			(2 << 2)
++#define			AT91_PMC_PRES_8			(3 << 2)
++#define			AT91_PMC_PRES_16		(4 << 2)
++#define			AT91_PMC_PRES_32		(5 << 2)
++#define			AT91_PMC_PRES_64		(6 << 2)
++#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
++#define			AT91_PMC_MDIV_1			(0 << 8)
++#define			AT91_PMC_MDIV_2			(1 << 8)
++#define			AT91_PMC_MDIV_3			(2 << 8)
++#define			AT91_PMC_MDIV_4			(3 << 8)
++
++#define	AT91_PMC_RES_34		(AT91_PMC + 0x34)	/* Reserved */
++#define	AT91_PMC_RES_38		(AT91_PMC + 0x38)	/* Reserved */
++#define	AT91_PMC_RES_3C		(AT91_PMC + 0x3c)	/* Reserved */
++
++#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
++
++#define	AT91_PMC_RES_50		(AT91_PMC + 0x50)	/* Reserved */
++#define	AT91_PMC_RES_54		(AT91_PMC + 0x54)	/* Reserved */
++#define	AT91_PMC_RES_58		(AT91_PMC + 0x58)	/* Reserved */
++#define	AT91_PMC_RES_5C		(AT91_PMC + 0x5c)	/* Reserved */
++
++#define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
++#define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
++#define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
++#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
++#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
++#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
++#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
++#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
++#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
++#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
++#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
++#define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
++
++#define AT91_PMC_PROT		(AT91_PMC + 0xe4)	/* Protect Register [AT91CAP9 revC only] */
++#define		AT91_PMC_PROTKEY	0x504d4301		/* Activation Code */
++
++#define AT91_PMC_VER	(AT91_PMC + 0xfc)	/* PMC Module Version [AT91CAP9 only] */
++
++#endif
+diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/AT91RM9200.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/AT91RM9200.h
+--- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/AT91RM9200.h	2009-01-01 13:09:34.000000000 +0100
++++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/AT91RM9200.h	2009-01-01 15:52:00.000000000 +0100
+@@ -28,6 +28,114 @@
+ #ifndef __ASSEMBLY__
+ typedef volatile unsigned int AT91_REG;		/* Hardware register definition */
+ 
++/*
++ * Peripheral identifiers/interrupts.
++ */
++#define AT91RM9200_ID_AIC	0	/* Advanced Interrupt Controller (FIQ) */
++#define AT91RM9200_ID_SYSIRQ	1	/* System Peripherals */
++#define AT91RM9200_ID_PIOA	2	/* Parallel IO Controller A */
++#define AT91RM9200_ID_PIOB	3	/* Parallel IO Controller B */
++#define AT91RM9200_ID_PIOC	4	/* Parallel IO Controller C */
++#define AT91RM9200_ID_PIOD	5	/* Parallel IO Controller D */
++#define AT91RM9200_ID_US0	6	/* USART 0 */
++#define AT91RM9200_ID_US1	7	/* USART 1 */
++#define AT91RM9200_ID_US2	8	/* USART 2 */
++#define AT91RM9200_ID_US3	9	/* USART 2 */
++#define AT91RM9200_ID_MCI	10	/* Multimedia Card Interface */
++#define AT91RM9200_ID_UDP	11	/* USB Device Port */
++#define AT91RM9200_ID_TWI	12	/* Two-Wire Interface */
++#define AT91RM9200_ID_SPI0	13	/* Serial Peripheral Interface 0 */
++#define AT91RM9200_ID_SSC0	14	/* Serial Synchronous Controller */
++#define AT91RM9200_ID_SSC1	15	/* Serial Synchronous Controller */
++#define AT91RM9200_ID_SSC2	16	/* Serial Synchronous Controller */
++#define AT91RM9200_ID_TC0	17	/* Timer Counter 0 */
++#define AT91RM9200_ID_TC1	18	/* Timer Counter 1 */
++#define AT91RM9200_ID_TC2	19	/* Timer Counter 2 */
++#define AT91RM9200_ID_TC3	20	/* Timer Counter 3 */
++#define AT91RM9200_ID_TC4	21	/* Timer Counter 4 */
++#define AT91RM9200_ID_TC5	22	/* Timer Counter 5 */
++#define AT91RM9200_ID_UHP	23	/* USB Host port */
++#define AT91RM9200_ID_EMAC	24	/* Ethernet */
++#define AT91RM9200_ID_IRQ0	25	/* Advanced Interrupt Controller (IRQ0) */
++#define AT91RM9200_ID_IRQ1	26	/* Advanced Interrupt Controller (IRQ1) */
++#define AT91RM9200_ID_IRQ2	27	/* Advanced Interrupt Controller (IRQ2) */
++#define AT91RM9200_ID_IRQ3	28	/* Advanced Interrupt Controller (IRQ3) */
++#define AT91RM9200_ID_IRQ4	29	/* Advanced Interrupt Controller (IRQ4) */
++#define AT91RM9200_ID_IRQ5	30	/* Advanced Interrupt Controller (IRQ5) */
++#define AT91RM9200_ID_IRQ6	31	/* Advanced Interrupt Controller (IRQ6) */
++/*
++ * User Peripheral physical base addresses.
++ */
++
++
++
++#define AT91RM9200_BASE_TC0	0xFFFA0000 /* (TC0) Base Address */
++#define AT91RM9200_BASE_TC1	0xFFFA4000 /* (TC0) Base Address */
++#define AT91RM9200_BASE_UDP	0xFFFB0000 /* (TC0) Base Address */
++#define AT91RM9200_BASE_MCI	0xFFFB4000 /* (TC0) Base Address */
++#define AT91RM9200_BASE_TWI	0xFFFB8000 /* (TC0) Base Address */
++#define AT91RM9200_BASE_EMAC	0xFFFBC000 /* (EMAC) Base Address */
++#define AT91RM9200_BASE_US0	0xFFFC0000 /* (US0) Base Address */
++#define AT91RM9200_BASE_US1	0xFFFC4000 /* (US1) Base Address */
++#define AT91RM9200_BASE_US2	0xFFFC8000 /* (US1) Base Address */
++#define AT91RM9200_BASE_US3	0xFFFCC000 /* (US1) Base Address */
++#define AT91RM9200_BASE_SPI	0xFFFE0000 /* (SPI) Base Address */
++
++#define AT91RM9200_BASE_AIC	0xFFFFF000 /* (AIC) Base Address */
++#define AT91RM9200_BASE_DBGU	0xFFFFF200 /* (DBGU) Base Address */
++#define AT91RM9200_BASE_PIOA	0xFFFFF400 /* (PIOA) Base Address */
++#define AT91RM9200_BASE_PIOB	0xFFFFF600 /* (PIOB) Base Address */
++#define AT91RM9200_BASE_PIOC	0xFFFFF800 /* (PIOC) Base Address */
++#define AT91RM9200_BASE_PIOD	0xFFFFFA00 /* (PIOC) Base Address */
++#define AT91RM9200_BASE_PMC	0xFFFFFC00 /* (PMC) Base Address */
++#define AT91RM9200_BASE_CKGR	0xFFFFFC20 /* (CKGR) Base Address */
++#define AT91RM9200_BASE_ST	0xFFFFFD00 /* (PMC) Base Address */
++#define AT91RM9200_BASE_RTC	0xFFFFFE00 /* (PMC) Base Address */
++#define AT91RM9200_BASE_MC	0xFFFFFF00 /* (PMC) Base Address */
++#define AT91RM9200_BASE_EBI	0xFFFFFF60 /* (PMC) Base Address */
++#define AT91RM9200_BASE_SMC2	0xFFFFFF70 /* (SMC2) Base Address */
++#define AT91RM9200_BASE_SDRAMC	0xFFFFFF90 /* (SMC2) Base Address */
++#define AT91RM9200_BASE_BFC	0xFFFFFFC0 /* (SMC2) Base Address */
++
++/*
++ * System Peripherals (offset from AT91_BASE_SYS)
++ */
++#define AT91_BASE_SYS		AT91RM9200_BASE_AIC
++
++#define AT91_AIC		(AT91RM9200_BASE_AIC	- AT91_BASE_SYS)
++#define AT91_DBGU		(AT91RM9200_BASE_DBGU	- AT91_BASE_SYS)
++#define AT91_PIOA		(AT91RM9200_BASE_PIOA	- AT91_BASE_SYS)
++#define AT91_PIOB		(AT91RM9200_BASE_PIOB	- AT91_BASE_SYS)
++#define AT91_PIOC		(AT91RM9200_BASE_PIOC	- AT91_BASE_SYS)
++#define AT91_PIOD		(AT91RM9200_BASE_PIOD	- AT91_BASE_SYS)
++#define AT91_PMC		(AT91RM9200_BASE_PMC	- AT91_BASE_SYS)
++#define AT91_PMC		(AT91RM9200_BASE_PMC	- AT91_BASE_SYS)
++#define AT91_PMC		(AT91RM9200_BASE_PMC	- AT91_BASE_SYS)
++#define AT91_PMC		(AT91RM9200_BASE_PMC	- AT91_BASE_SYS)
++#define AT91_PMC		(AT91RM9200_BASE_PMC	- AT91_BASE_SYS)
++
++#define AT91_CKGR		(AT91RM9200_BASE_CKGR	- AT91_BASE_SYS)
++#define AT91_ST			(AT91RM9200_BASE_ST	- AT91_BASE_SYS)
++#define AT91_RTC		(AT91RM9200_BASE_RTC	- AT91_BASE_SYS)
++#define AT91_MC			(AT91RM9200_BASE_MC	- AT91_BASE_SYS)
++#define AT91_EBI		(AT91RM9200_BASE_EBI	- AT91_BASE_SYS)
++#define 	AT91_EBI_CSA		((AT91RM9200_BASE_EBI +0x00)	- AT91_BASE_SYS)
++#define AT91_SMC2		(AT91RM9200_BASE_SMC2	- AT91_BASE_SYS)
++#define		AT91_SMC2_CSR0		((AT91RM9200_BASE_SMC2+0x00)	- AT91_BASE_SYS)
++#define		AT91_SMC2_CSR1		((AT91RM9200_BASE_SMC2+0x04)	- AT91_BASE_SYS)
++#define		AT91_SMC2_CSR2		((AT91RM9200_BASE_SMC2+0x08)	- AT91_BASE_SYS)
++#define		AT91_SMC2_CSR3		((AT91RM9200_BASE_SMC2+0x0c)	- AT91_BASE_SYS)
++#define		AT91_SMC2_CSR4		((AT91RM9200_BASE_SMC2+0x10)	- AT91_BASE_SYS)
++#define		AT91_SMC2_CSR5		((AT91RM9200_BASE_SMC2+0x14)	- AT91_BASE_SYS)
++#define		AT91_SMC2_CSR6		((AT91RM9200_BASE_SMC2+0x18)	- AT91_BASE_SYS)
++#define		AT91_SMC2_CSR7		((AT91RM9200_BASE_SMC2+0x1c)	- AT91_BASE_SYS)
++
++
++#define AT91_USART0		AT91RM9200_BASE_US0
++#define AT91_USART1		AT91RM9200_BASE_US1
++#define AT91_USART2		AT91RM9200_BASE_US2
++#define AT91_USART3		AT91RM9200_BASE_US3
++
+ /*****************************************************************************/
+ /*        SOFTWARE API DEFINITION  FOR Timer Counter Channel Interface       */
+ /*****************************************************************************/
+diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/gpio.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/gpio.h
+--- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/gpio.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/gpio.h	2009-01-01 14:02:11.000000000 +0100
+@@ -0,0 +1,367 @@
++/*
++ * [origin: Linux kernel include/asm-arm/arch-at91/gpio.h]
++ *
++ *  Copyright (C) 2005 HP Labs
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ */
++
++#ifndef __ASM_ARCH_AT91_GPIO_H
++#define __ASM_ARCH_AT91_GPIO_H
++
++#include <asm/io.h>
++#include <asm/errno.h>
++#include <asm/arch/at91_pio.h>
++#include <asm/arch/hardware.h>
++
++#define PIN_BASE		32
++
++#define MAX_GPIO_BANKS		5
++
++/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
++
++#define	AT91_PIN_PA0	(PIN_BASE + 0x00 + 0)
++#define	AT91_PIN_PA1	(PIN_BASE + 0x00 + 1)
++#define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
++#define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
++#define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
++#define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
++#define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
++#define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
++#define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
++#define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
++#define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
++#define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
++#define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
++#define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
++#define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
++#define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
++#define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
++#define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
++#define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
++#define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
++#define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
++#define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
++#define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
++#define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
++#define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
++#define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
++#define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
++#define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
++#define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
++#define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
++#define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
++#define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
++
++#define	AT91_PIN_PB0	(PIN_BASE + 0x20 + 0)
++#define	AT91_PIN_PB1	(PIN_BASE + 0x20 + 1)
++#define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
++#define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
++#define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
++#define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
++#define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
++#define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
++#define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
++#define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
++#define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
++#define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
++#define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
++#define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
++#define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
++#define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
++#define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
++#define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
++#define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
++#define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
++#define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
++#define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
++#define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
++#define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
++#define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
++#define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
++#define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
++#define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
++#define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
++#define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
++#define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
++#define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
++
++#define	AT91_PIN_PC0	(PIN_BASE + 0x40 + 0)
++#define	AT91_PIN_PC1	(PIN_BASE + 0x40 + 1)
++#define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
++#define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
++#define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
++#define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
++#define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
++#define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
++#define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
++#define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
++#define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
++#define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
++#define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
++#define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
++#define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
++#define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
++#define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
++#define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
++#define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
++#define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
++#define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
++#define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
++#define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
++#define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
++#define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
++#define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
++#define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
++#define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
++#define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
++#define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
++#define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
++#define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
++
++#define	AT91_PIN_PD0	(PIN_BASE + 0x60 + 0)
++#define	AT91_PIN_PD1	(PIN_BASE + 0x60 + 1)
++#define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
++#define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
++#define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
++#define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
++#define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
++#define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
++#define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
++#define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
++#define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
++#define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
++#define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
++#define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
++#define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
++#define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
++#define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
++#define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
++#define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
++#define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
++#define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
++#define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
++#define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
++#define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
++#define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
++#define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
++#define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
++#define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
++#define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
++#define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
++#define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
++#define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
++
++#define	AT91_PIN_PE0	(PIN_BASE + 0x80 + 0)
++#define	AT91_PIN_PE1	(PIN_BASE + 0x80 + 1)
++#define	AT91_PIN_PE2	(PIN_BASE + 0x80 + 2)
++#define	AT91_PIN_PE3	(PIN_BASE + 0x80 + 3)
++#define	AT91_PIN_PE4	(PIN_BASE + 0x80 + 4)
++#define	AT91_PIN_PE5	(PIN_BASE + 0x80 + 5)
++#define	AT91_PIN_PE6	(PIN_BASE + 0x80 + 6)
++#define	AT91_PIN_PE7	(PIN_BASE + 0x80 + 7)
++#define	AT91_PIN_PE8	(PIN_BASE + 0x80 + 8)
++#define	AT91_PIN_PE9	(PIN_BASE + 0x80 + 9)
++#define	AT91_PIN_PE10	(PIN_BASE + 0x80 + 10)
++#define	AT91_PIN_PE11	(PIN_BASE + 0x80 + 11)
++#define	AT91_PIN_PE12	(PIN_BASE + 0x80 + 12)
++#define	AT91_PIN_PE13	(PIN_BASE + 0x80 + 13)
++#define	AT91_PIN_PE14	(PIN_BASE + 0x80 + 14)
++#define	AT91_PIN_PE15	(PIN_BASE + 0x80 + 15)
++#define	AT91_PIN_PE16	(PIN_BASE + 0x80 + 16)
++#define	AT91_PIN_PE17	(PIN_BASE + 0x80 + 17)
++#define	AT91_PIN_PE18	(PIN_BASE + 0x80 + 18)
++#define	AT91_PIN_PE19	(PIN_BASE + 0x80 + 19)
++#define	AT91_PIN_PE20	(PIN_BASE + 0x80 + 20)
++#define	AT91_PIN_PE21	(PIN_BASE + 0x80 + 21)
++#define	AT91_PIN_PE22	(PIN_BASE + 0x80 + 22)
++#define	AT91_PIN_PE23	(PIN_BASE + 0x80 + 23)
++#define	AT91_PIN_PE24	(PIN_BASE + 0x80 + 24)
++#define	AT91_PIN_PE25	(PIN_BASE + 0x80 + 25)
++#define	AT91_PIN_PE26	(PIN_BASE + 0x80 + 26)
++#define	AT91_PIN_PE27	(PIN_BASE + 0x80 + 27)
++#define	AT91_PIN_PE28	(PIN_BASE + 0x80 + 28)
++#define	AT91_PIN_PE29	(PIN_BASE + 0x80 + 29)
++#define	AT91_PIN_PE30	(PIN_BASE + 0x80 + 30)
++#define	AT91_PIN_PE31	(PIN_BASE + 0x80 + 31)
++
++static unsigned long at91_pios[] = {
++	AT91_PIOA,
++	AT91_PIOB,
++	AT91_PIOC,
++#ifdef AT91_PIOD
++	AT91_PIOD,
++#ifdef AT91_PIOE
++	AT91_PIOE
++#endif
++#endif
++};
++
++static inline void *pin_to_controller(unsigned pin)
++{
++	pin -= PIN_BASE;
++	pin /= 32;
++	return (void *)(AT91_BASE_SYS + at91_pios[pin]);
++}
++
++static inline unsigned pin_to_mask(unsigned pin)
++{
++	pin -= PIN_BASE;
++	return 1 << (pin % 32);
++}
++
++/*
++ * mux the pin to the "GPIO" peripheral role.
++ */
++static inline int at91_set_GPIO_periph(unsigned pin, int use_pullup)
++{
++	void		*pio = pin_to_controller(pin);
++	unsigned	mask = pin_to_mask(pin);
++
++	__raw_writel(mask, pio + PIO_IDR);
++	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
++	__raw_writel(mask, pio + PIO_PER);
++	return 0;
++}
++
++/*
++ * mux the pin to the "A" internal peripheral role.
++ */
++static inline int at91_set_A_periph(unsigned pin, int use_pullup)
++{
++	void		*pio = pin_to_controller(pin);
++	unsigned	mask = pin_to_mask(pin);
++
++	__raw_writel(mask, pio + PIO_IDR);
++	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
++	__raw_writel(mask, pio + PIO_ASR);
++	__raw_writel(mask, pio + PIO_PDR);
++	return 0;
++}
++
++/*
++ * mux the pin to the "B" internal peripheral role.
++ */
++static inline int at91_set_B_periph(unsigned pin, int use_pullup)
++{
++	void		*pio = pin_to_controller(pin);
++	unsigned	mask = pin_to_mask(pin);
++
++	__raw_writel(mask, pio + PIO_IDR);
++	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
++	__raw_writel(mask, pio + PIO_BSR);
++	__raw_writel(mask, pio + PIO_PDR);
++	return 0;
++}
++
++/*
++ * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
++ * configure it for an input.
++ */
++static inline int at91_set_gpio_input(unsigned pin, int use_pullup)
++{
++	void		*pio = pin_to_controller(pin);
++	unsigned	mask = pin_to_mask(pin);
++
++	__raw_writel(mask, pio + PIO_IDR);
++	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
++	__raw_writel(mask, pio + PIO_ODR);
++	__raw_writel(mask, pio + PIO_PER);
++	return 0;
++}
++
++/*
++ * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
++ * and configure it for an output.
++ */
++static inline int at91_set_gpio_output(unsigned pin, int value)
++{
++	void		*pio = pin_to_controller(pin);
++	unsigned	mask = pin_to_mask(pin);
++
++	__raw_writel(mask, pio + PIO_IDR);
++	__raw_writel(mask, pio + PIO_PUDR);
++	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
++	__raw_writel(mask, pio + PIO_OER);
++	__raw_writel(mask, pio + PIO_PER);
++	return 0;
++}
++
++/*
++ * enable/disable the glitch filter; mostly used with IRQ handling.
++ */
++static inline int at91_set_deglitch(unsigned pin, int is_on)
++{
++	void		*pio = pin_to_controller(pin);
++	unsigned	mask = pin_to_mask(pin);
++
++	__raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
++	return 0;
++}
++
++/*
++ * enable/disable the multi-driver; This is only valid for output and
++ * allows the output pin to run as an open collector output.
++ */
++static inline int at91_set_multi_drive(unsigned pin, int is_on)
++{
++	void		*pio = pin_to_controller(pin);
++	unsigned	mask = pin_to_mask(pin);
++
++	__raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
++	return 0;
++}
++
++static inline int gpio_direction_input(unsigned pin)
++{
++	void		*pio = pin_to_controller(pin);
++	unsigned	mask = pin_to_mask(pin);
++
++	if (!(__raw_readl(pio + PIO_PSR) & mask))
++		return -EINVAL;
++	__raw_writel(mask, pio + PIO_ODR);
++	return 0;
++}
++
++static inline int gpio_direction_output(unsigned pin, int value)
++{
++	void		*pio = pin_to_controller(pin);
++	unsigned	mask = pin_to_mask(pin);
++
++	if (!(__raw_readl(pio + PIO_PSR) & mask))
++		return -EINVAL;
++	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
++	__raw_writel(mask, pio + PIO_OER);
++	return 0;
++}
++
++/*
++ * assuming the pin is muxed as a gpio output, set its value.
++ */
++static inline int at91_set_gpio_value(unsigned pin, int value)
++{
++	void		*pio = pin_to_controller(pin);
++	unsigned	mask = pin_to_mask(pin);
++
++	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
++	return 0;
++}
++
++/*
++ * read the pin's value (works even if it's not muxed as a gpio).
++ */
++static inline int at91_get_gpio_value(unsigned pin)
++{
++	void		*pio = pin_to_controller(pin);
++	unsigned	mask = pin_to_mask(pin);
++	u32		pdsr;
++
++	pdsr = __raw_readl(pio + PIO_PDSR);
++	return (pdsr & mask) != 0;
++}
++
++#endif
+diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/io.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/io.h
+--- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/io.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/io.h	2009-01-01 15:59:51.000000000 +0100
+@@ -0,0 +1,56 @@
++/*
++ * [origin: Linux kernel include/asm-arm/arch-at91/io.h]
++ *
++ *  Copyright (C) 2003 SAN People
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef __ASM_ARCH_IO_H
++#define __ASM_ARCH_IO_H
++
++#include <asm/io.h>
++
++static inline unsigned int at91_sys_read(unsigned int reg_offset)
++{
++	void *addr = (void *)AT91_BASE_SYS;
++
++	return __raw_readl(addr + reg_offset);
++}
++
++static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
++{
++	void *addr = (void *)AT91_BASE_SYS;
++
++	__raw_writel(value, addr + reg_offset);
++}
++
++static inline void at91_sys_setbit(unsigned long value, unsigned int reg_offset)
++{
++	void *addr = (void *)(AT91_BASE_SYS  + reg_offset);
++	value |= __raw_readl(addr);
++	__raw_writel(value, addr);
++}
++
++static inline void at91_sys_clrbit(unsigned long value, unsigned int reg_offset)
++{
++	void *addr = (void *)(AT91_BASE_SYS  + reg_offset);
++	unsigned long data;
++	data = __raw_readl(addr);
++	data &= ~value;
++	__raw_writel(data, addr);
++}
++
++#endif
+
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch
new file mode 100644
index 000000000..2e7e57822
--- /dev/null
+++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch
@@ -0,0 +1,309 @@
+diff -urN u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk_df.h u-boot-2009.01/include/configs/at91rm9200dk_df.h
+--- u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk_df.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/include/configs/at91rm9200dk_df.h	2009-01-01 21:19:30.000000000 +0100
+@@ -0,0 +1,251 @@
++/*
++ * Rick Bronson <rick@efn.org>
++ *
++ * Configuration settings for the AT91RM9200DK board.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++#define	AT91RM9200_BOARD	MACH_TYPE_AT91RM9200DK
++#define	CONFIG_HOSTNAME		at91rm9200dk
++
++/* ARM asynchronous clock */
++#define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
++#define AT91C_MASTER_CLOCK	59904000	/* peripheral clock (AT91C_MASTER_CLOCK / 3) */
++/* #define AT91C_MASTER_CLOCK	44928000 */	/* peripheral clock (AT91C_MASTER_CLOCK / 4) */
++
++#define AT91_SLOW_CLOCK		32768	/* slow clock */
++
++#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
++#define	CONFIG_AT91		1	/* THis is an ARM from the AT91 family */
++#define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
++#define CONFIG_AT91RM9200DK	1	/* on an AT91RM9200DK Board	*/
++#undef  CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
++#define USE_920T_MMU		1
++
++#define CONFIG_SKIP_LOWLEVEL_INIT	/* Already done by dataflashboot */
++
++#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
++#define CONFIG_SETUP_MEMORY_TAGS 1
++#define CONFIG_INITRD_TAG	1
++
++#ifndef CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_USE_MAIN_OSCILLATOR		1
++/* flash */
++#define MC_PUIA_VAL	0x00000000
++#define MC_PUP_VAL	0x00000000
++#define MC_PUER_VAL	0x00000000
++#define MC_ASR_VAL	0x00000000
++#define MC_AASR_VAL	0x00000000
++#define EBI_CFGR_VAL	0x00000000
++#define SMC_CSR0_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */
++
++/* clocks */
++#define PLLAR_VAL	0x20263E04 /* 179.712000 MHz for PCK */
++#define PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
++#define MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
++
++/* sdram */
++#define PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
++#define PIOC_BSR_VAL	0x00000000
++#define PIOC_PDR_VAL	0xFFFF0000
++#define EBI_CSA_VAL	0x00000002 /* CS1=SDRAM */
++#define SDRC_CR_VAL	0x2188c155 /* set up the SDRAM */
++#define SDRAM		0x20000000 /* address of the SDRAM */
++#define SDRAM1		0x20000080 /* address of the SDRAM */
++#define SDRAM_VAL	0x00000000 /* value written to SDRAM */
++#define SDRC_MR_VAL	0x00000002 /* Precharge All */
++#define SDRC_MR_VAL1	0x00000004 /* refresh */
++#define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
++#define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
++#define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
++#else
++#define CONFIG_SKIP_RELOCATE_UBOOT
++#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
++/*
++ * Size of malloc() pool
++ */
++#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
++#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
++
++#define CONFIG_BAUDRATE 115200
++
++/*
++ * Hardware drivers
++ */
++
++/* define one of these to choose the DBGU, USART0  or USART1 as console */
++#define CONFIG_DBGU
++#undef CONFIG_USART0
++#undef CONFIG_USART1
++
++#undef	CONFIG_HWFLOW			/* don't include RTS/CTS flow control support	*/
++
++#undef	CONFIG_MODEM_SUPPORT		/* disable modem initialization stuff */
++
++#define CONFIG_BOOTDELAY      3
++/* #define CONFIG_ENV_OVERWRITE	1 */
++
++
++/*
++ * BOOTP options
++ */
++#define CONFIG_BOOTP_BOOTFILESIZE
++#define CONFIG_BOOTP_BOOTPATH
++#define CONFIG_BOOTP_GATEWAY
++#define CONFIG_BOOTP_HOSTNAME
++
++
++/*
++ * Command line configuration.
++ */
++#include <config_cmd_default.h>
++
++#define CONFIG_CMD_DHCP
++#define CONFIG_CMD_MII
++#define CONFIG_CMD_NAND
++#define CONFIG_CMD_AT91_SPIMUX
++
++#define CONFIG_NAND_LEGACY
++
++#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
++#define SECTORSIZE 512
++
++#define ADDR_COLUMN 1
++#define ADDR_PAGE 2
++#define ADDR_COLUMN_PAGE 3
++
++#define NAND_ChipID_UNKNOWN	0x00
++#define NAND_MAX_FLOORS 1
++#define NAND_MAX_CHIPS 1
++
++#define AT91_SMART_MEDIA_ALE (1 << 22)	/* our ALE is AD22 */
++#define AT91_SMART_MEDIA_CLE (1 << 21)	/* our CLE is AD21 */
++
++#include <asm/arch/AT91RM9200.h>	/* needed for port definitions */
++#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
++#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
++
++#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2))
++
++#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0)
++#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0)
++#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
++#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
++/* the following are NOP's in our implementation */
++#define NAND_CTL_CLRALE(nandptr)
++#define NAND_CTL_SETALE(nandptr)
++#define NAND_CTL_CLRCLE(nandptr)
++#define NAND_CTL_SETCLE(nandptr)
++
++#define CONFIG_NR_DRAM_BANKS 1
++#define PHYS_SDRAM 0x20000000
++#define PHYS_SDRAM_SIZE 0x2000000  /* 32 megs */
++
++#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
++#define CONFIG_SYS_MEMTEST_END			CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
++
++#define CONFIG_DRIVER_ETHER
++#define CONFIG_NET_RETRY_COUNT		20
++#define CONFIG_AT91C_USE_RMII
++
++/* AC Characteristics */
++/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
++#define DATAFLASH_TCSS	(0xC << 16)
++#define DATAFLASH_TCHS	(0x1 << 24)
++
++#define CONFIG_HAS_DATAFLASH		1
++#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
++#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
++#define CONFIG_SYS_MAX_DATAFLASH_PAGES		16384
++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* Logical adress for CS3 */
++#define CONFIG__SUPPORT_BLOCK_ERASE		1
++
++
++#define PHYS_FLASH_1			0x10000000
++#define PHYS_FLASH_SIZE			0x200000  /* 2 megs main flash */
++#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
++#define CONFIG_SYS_MAX_FLASH_BANKS		1
++#define CONFIG_SYS_MAX_FLASH_SECT		256
++#define CONFIG_SYS_FLASH_ERASE_TOUT		(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
++#define CONFIG_SYS_FLASH_WRITE_TOUT		(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
++
++#define	CONFIG_ENV_IS_IN_DATAFLASH	1
++#define	CONFIG_NEW_PARTITION		1
++
++#ifdef CONFIG_ENV_IS_IN_DATAFLASH
++#ifdef	CONFIG_NEW_PARTITION		
++#define CONFIG_ENV_OFFSET		0x4200
++#define CONFIG_ENV_ADDR			(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
++#define CONFIG_ENV_SIZE			0x2000  /* 8 * 1056 really , but start.s is not OK with this*/
++#else
++#define CONFIG_ENV_OFFSET		0x20000
++#define CONFIG_ENV_ADDR			(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
++#define CONFIG_ENV_SIZE			0x2000  /* 0x8000 */
++#endif
++#else
++#define CONFIG_ENV_IS_IN_FLASH		1
++#ifdef CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0xe000)  /* between boot.bin and u-boot.bin.gz */
++#define CONFIG_ENV_SIZE			0x2000  /* 0x8000 */
++#else
++#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x60000)  /* after u-boot.bin */
++#define CONFIG_ENV_SIZE			0x10000 /* sectors are 64K here */
++#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
++#endif	/* CONFIG_ENV_IS_IN_DATAFLASH */
++
++#if defined(CONFIG_AT91RM9200DK)
++#define	DATAFLASH_MMC_SELECT		AT91_PIN_PB7
++#else
++#define	DATAFLASH_MMC_SELECT		AT91_PIN_PB22
++#endif
++
++#define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
++
++#ifdef CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_BOOT_SIZE		0x6000 /* 24 KBytes */
++#define CONFIG_SYS_U_BOOT_BASE		(PHYS_FLASH_1 + 0x10000)
++#define CONFIG_SYS_U_BOOT_SIZE		0x10000 /* 64 KBytes */
++#else
++#define CONFIG_SYS_BOOT_SIZE		0x00 /* 0 KBytes */
++#define CONFIG_SYS_U_BOOT_BASE		PHYS_FLASH_1
++#define CONFIG_SYS_U_BOOT_SIZE		0x60000 /* 384 KBytes */
++#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
++
++#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 19200, 38400, 57600, 9600 }
++
++#define CONFIG_SYS_PROMPT		"U-Boot> "	/* Monitor Command Prompt */
++#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
++#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
++#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
++
++#define CONFIG_SYS_HZ 1000
++#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2	/* AT91C_TC0_CMR is implicitly set to */
++						/* AT91C_TC_TIMER_DIV1_CLOCK */
++
++#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
++
++#ifdef CONFIG_USE_IRQ
++#error CONFIG_USE_IRQ not supported
++#endif
++
++#endif
+diff -urN u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk.h u-boot-2009.01/include/configs/at91rm9200dk.h
+--- u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk.h	2009-01-01 13:09:35.000000000 +0100
++++ u-boot-2009.01/include/configs/at91rm9200dk.h	2009-01-01 17:06:32.000000000 +0100
+@@ -24,6 +24,8 @@
+ 
+ #ifndef __CONFIG_H
+ #define __CONFIG_H
++#define	AT91RM9200_BOARD	MACH_TYPE_AT91RM9200DK
++#define	CONFIG_HOSTNAME		at91rm9200dk
+ 
+ /* ARM asynchronous clock */
+ #define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
+@@ -33,6 +35,7 @@
+ #define AT91_SLOW_CLOCK		32768	/* slow clock */
+ 
+ #define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
++#define	CONFIG_AT91		1	/* THis is an ARM from the AT91 family */
+ #define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
+ #define CONFIG_AT91RM9200DK	1	/* on an AT91RM9200DK Board	*/
+ #undef  CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+@@ -117,6 +120,7 @@
+ #define CONFIG_CMD_DHCP
+ #define CONFIG_CMD_MII
+ #define CONFIG_CMD_NAND
++#define CONFIG_CMD_AT91_SPIMUX
+ 
+ #define CONFIG_NAND_LEGACY
+ 
+@@ -198,6 +202,11 @@
+ #endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
+ #endif	/* CONFIG_ENV_IS_IN_DATAFLASH */
+ 
++#if defined(CONFIG_AT91RM9200DK)
++#define	DATAFLASH_MMC_SELECT		AT91_PIN_PB7
++#else
++#define	DATAFLASH_MMC_SELECT		AT91_PIN_PB22
++#endif
+ 
+ #define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
+ 
+diff -urN u-boot-2009.01-rc1-0rig//Makefile u-boot-2009.01/Makefile
+--- u-boot-2009.01-rc1-0rig//Makefile	2009-01-01 13:09:30.000000000 +0100
++++ u-boot-2009.01/Makefile	2009-01-01 21:35:24.000000000 +0100
+@@ -2562,6 +2562,9 @@
+ ## Atmel AT91RM9200 Systems
+ #########################################################################
+ 
++at91rm9200dk_df_config	:	unconfig
++	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
++
+ at91rm9200dk_config	:	unconfig
+ 	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
+ 
+
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-003-at91rm9200dk.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-003-at91rm9200dk.patch
new file mode 100644
index 000000000..8f14170fa
--- /dev/null
+++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-003-at91rm9200dk.patch
@@ -0,0 +1,324 @@
+diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/at91rm9200dk.c u-boot-2009.01/board/atmel/at91rm9200dk/at91rm9200dk.c
+--- u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/at91rm9200dk.c	2009-01-01 13:09:31.000000000 +0100
++++ u-boot-2009.01/board/atmel/at91rm9200dk/at91rm9200dk.c	2009-01-01 16:11:36.000000000 +0100
+@@ -3,6 +3,9 @@
+  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+  * Marius Groeger <mgroeger@sysgo.de>
+  *
++ * (C) Copyright 2008
++ * Ulf Samuelsson <ulf.samuelsson@atmel.com>
++ *
+  * See file CREDITS for list of people who contributed to this
+  * project.
+  *
+@@ -24,6 +27,10 @@
+ 
+ #include <common.h>
+ #include <asm/arch/AT91RM9200.h>
++#include <asm/arch/at91_pmc.h>
++#include <asm/arch/at91_pio.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/io.h>
+ #include <at91rm9200_net.h>
+ #include <dm9161.h>
+ 
+@@ -41,13 +48,13 @@
+ 
+ 	/* Correct IRDA resistor problem */
+ 	/* Set PA23_TXD in Output */
+-	((AT91PS_PIO) AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2;
++	at91_set_gpio_output(AT91_PIN_PA23, 1);
+ 
+ 	/* memory and cpu-speed are setup before relocation */
+ 	/* so we do _nothing_ here */
+ 
+ 	/* arch number of AT91RM9200DK-Board */
+-	gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200DK;
++	gd->bd->bi_arch_number = AT91RM9200_BOARD;
+ 	/* adress of boot parameters */
+ 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ 
+@@ -91,46 +98,58 @@
+  */
+ #if defined(CONFIG_CMD_NAND)
+ extern ulong nand_probe (ulong physadr);
++/* set the bus interface characteristics based on
++ * tDS Data Set up Time 30 - ns
++ * tDH Data Hold Time 20 - ns
++ * tALS ALE Set up Time 20 - ns
++ * 16ns at 60 MHz ~= 3
++ */
+ 
+-#define AT91_SMARTMEDIA_BASE 0x40000000	/* physical address to access memory on NCS3 */
+-void nand_init (void)
+-{
+-	/* Setup Smart Media, fitst enable the address range of CS3 */
+-	*AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia;
+-	/* set the bus interface characteristics based on
+-	   tDS Data Set up Time 30 - ns
+-	   tDH Data Hold Time 20 - ns
+-	   tALS ALE Set up Time 20 - ns
+-	   16ns at 60 MHz ~= 3  */
+ /*memory mapping structures */
+ #define SM_ID_RWH	(5 << 28)
+ #define SM_RWH		(1 << 28)
+ #define SM_RWS		(0 << 24)
+ #define SM_TDF		(1 << 8)
+ #define SM_NWS		(3)
+-	AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS |
+-		AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 |
+-		SM_TDF | AT91C_SMC2_WSEN | SM_NWS);
++
++#define	SMARTMEDIA_INIT	(			\
++		SM_RWH |			\
++		SM_RWS |			\
++		AT91C_SMC2_ACSS_STANDARD |	\
++		AT91C_SMC2_DBW_8 |		\
++		SM_TDF |			\
++		AT91C_SMC2_WSEN |		\
++		SM_NWS				\
++		)
++
++
++
++#define AT91_SMARTMEDIA_BASE 0x40000000	/* physical address to access memory on NCS3 */
++void nand_init (void)
++{
++	/* Setup Smart Media, fitst enable the address range of CS3 */
++	/* *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia; */
++	at91_sys_setbit(AT91C_EBI_CS3A_SMC_SmartMedia, AT91_EBI_CSA);
++
++	/* Init Smartmedia Interface */
++	at91_sys_write(AT91_SMC2_CSR3, SMARTMEDIA_INIT);
+ 
+ 	/* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */
+-	*AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
+-		AT91C_PC3_BFBAA_SMWE;
+-	*AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
+-		AT91C_PC3_BFBAA_SMWE;
++	at91_set_A_periph(AT91_PIN_PC0, 0);	/* BFCK	*/
++	at91_set_A_periph(AT91_PIN_PC1, 0);	/* BFRDY/SMOE */
++	at91_set_A_periph(AT91_PIN_PC3, 0);	/* BFBAA/SMWE */
+ 
+ 	/* Configure PC2 as input (signal READY of the SmartMedia) */
+-	*AT91C_PIOC_PER = AT91C_PC2_BFAVD;	/* enable direct output enable */
+-	*AT91C_PIOC_ODR = AT91C_PC2_BFAVD;	/* disable output */
++	at91_set_gpio_input(AT91_PIN_PC2, 0);
+ 
+ 	/* Configure PB1 as input (signal Card Detect of the SmartMedia) */
+-	*AT91C_PIOB_PER = AT91C_PIO_PB1;	/* enable direct output enable */
+-	*AT91C_PIOB_ODR = AT91C_PIO_PB1;	/* disable output */
++	at91_set_gpio_input(AT91_PIN_PB1, 0);
+ 
+ 	/* PIOB and PIOC clock enabling */
+-	*AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
+-	*AT91C_PMC_PCER = 1 << AT91C_ID_PIOC;
++	at91_sys_write(AT91_PMC_PCER, 1 << AT91RM9200_ID_PIOB);
++	at91_sys_write(AT91_PMC_PCER, 1 << AT91RM9200_ID_PIOC);
+ 
+-	if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
++	if (at91_get_gpio_value(AT91_PIN_PB1))
+ 		printf ("  No SmartMedia card inserted\n");
+ #ifdef DEBUG
+ 	printf ("  SmartMedia card inserted\n");
+@@ -140,3 +159,4 @@
+ 	printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20);
+ }
+ #endif
++
+diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/led.c u-boot-2009.01/board/atmel/at91rm9200dk/led.c
+--- u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/led.c	2009-01-01 13:09:31.000000000 +0100
++++ u-boot-2009.01/board/atmel/at91rm9200dk/led.c	2009-01-01 15:53:56.000000000 +0100
+@@ -24,57 +24,105 @@
+ 
+ #include <common.h>
+ #include <asm/arch/AT91RM9200.h>
++/*#include <asm/arch/at91_pmc.h>*/
++#include <asm/arch/gpio.h>
++#include <asm/arch/io.h>
+ 
+-#define	GREEN_LED	AT91C_PIO_PB0
+-#define	YELLOW_LED	AT91C_PIO_PB1
+-#define	RED_LED	AT91C_PIO_PB2
++#define	GREEN_LED			AT91_PIN_PB0
++#define	YELLOW_LED			AT91_PIN_PB1
++#define	RED_LED				AT91_PIN_PB2
+ 
+-void	green_LED_on(void)
++
++#define	GREEN_LED_ON			0
++#define	GREEN_LED_OFF			1
++#define	YELLOW_LED_ON			0
++#define	YELLOW_LED_OFF			1
++#define	RED_LED_ON			0
++#define	RED_LED_OFF			1
++
++#define	TIME_SLICE			500000
++
++void yellow_LED_on(void)
++{
++	at91_set_gpio_value(YELLOW_LED, YELLOW_LED_ON);
++}
++
++void yellow_LED_off(void)
++{
++	at91_set_gpio_value(YELLOW_LED, YELLOW_LED_OFF);
++}
++
++void red_LED_on(void)
+ {
+-	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+-	PIOB->PIO_CODR		= GREEN_LED;
++	at91_set_gpio_value(RED_LED, RED_LED_ON);
+ }
+ 
+-void	 yellow_LED_on(void)
++void red_LED_off(void)
+ {
+-	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+-	PIOB->PIO_CODR		= YELLOW_LED;
++	at91_set_gpio_value(RED_LED, RED_LED_OFF);
+ }
+ 
+-void	 red_LED_on(void)
++void green_LED_on(void)
+ {
+-	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+-	PIOB->PIO_CODR		= RED_LED;
++	at91_set_gpio_value(GREEN_LED, GREEN_LED_ON);
+ }
+ 
+-void	green_LED_off(void)
++void green_LED_off(void)
+ {
+-	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+-	PIOB->PIO_SODR		= GREEN_LED;
++	at91_set_gpio_value(GREEN_LED, GREEN_LED_OFF);
+ }
+ 
+-void	yellow_LED_off(void)
++static void	delay(unsigned int	time)
+ {
+-	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+-	PIOB->PIO_SODR		= YELLOW_LED;
++	volatile unsigned int	counter = time;
++	while(counter > 0) counter--;
+ }
+ 
+-void	red_LED_off(void)
++void	green_LED_blink(unsigned int time)
+ {
+-	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+-	PIOB->PIO_SODR		= RED_LED;
++	while(time > 0) {
++		green_LED_on();
++		delay(TIME_SLICE);
++		green_LED_off();
++		delay(TIME_SLICE);
++		time--;
++	}
+ }
+ 
++void	yellow_LED_blink(unsigned int time)
++{
++	while(time > 0) {
++		yellow_LED_on();
++		delay(TIME_SLICE);
++		yellow_LED_off();
++		delay(TIME_SLICE);
++		time--;
++	}
++}
+ 
+-void coloured_LED_init (void)
++void	red_LED_blink(unsigned int time)
+ {
+-	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+-	AT91PS_PMC	PMC	= AT91C_BASE_PMC;
+-	PMC->PMC_PCER		= (1 << AT91C_ID_PIOB);	/* Enable PIOB clock */
+-	/* Disable peripherals on LEDs */
+-	PIOB->PIO_PER		= AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
+-	/* Enable pins as outputs */
+-	PIOB->PIO_OER		= AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
+-	/* Turn all LEDs OFF */
+-	PIOB->PIO_SODR		= AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
++	while(time > 0) {
++		red_LED_on();
++		delay(TIME_SLICE);
++		red_LED_off();
++		delay(TIME_SLICE);
++		time--;
++	}
+ }
++
++void coloured_LED_init(void)
++{
++	/* Enable clock */
++	at91_sys_write(AT91C_PMC_PCER, 1 << AT91RM9200_ID_PIOB);
++
++	at91_set_gpio_output(GREEN_LED, 1);
++	at91_set_gpio_output(YELLOW_LED, 1);
++	at91_set_gpio_output(RED_LED, 1);
++
++	at91_set_gpio_value(GREEN_LED,	GREEN_LED_OFF);
++	at91_set_gpio_value(YELLOW_LED, YELLOW_LED_OFF);
++	at91_set_gpio_value(RED_LED,	RED_LED_ON);
++}
++
++
+diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/mux.c u-boot-2009.01/board/atmel/at91rm9200dk/mux.c
+--- u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/mux.c	2009-01-01 13:09:31.000000000 +0100
++++ u-boot-2009.01/board/atmel/at91rm9200dk/mux.c	2009-01-01 16:38:01.000000000 +0100
+@@ -1,37 +1,29 @@
+ #include <config.h>
+ #include <common.h>
+ #include <asm/hardware.h>
++#include <asm/arch/at91_pio.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/io.h>
+ #include <dataflash.h>
+ 
+ int AT91F_GetMuxStatus(void) {
+-#ifdef	DATAFLASH_MMC_SELECT
+-	AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT; /* Set in PIO mode */
+-	AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT; /* Configure in output */
+-
+-
+-	if(AT91C_BASE_PIOB->PIO_ODSR & DATAFLASH_MMC_SELECT) {
+-		return 1;
+-	} else {
+-		return 0;
+-	}
+-#endif
++#ifdef	CONFIG_CMD_AT91_SPIMUX
++	return at91_get_gpio_value(DATAFLASH_MMC_SELECT);
++#else
+ 	return 0;
++#endif
+ }
+ 
+-void AT91F_SelectMMC(void) {
+-#ifdef	DATAFLASH_MMC_SELECT
+-	AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT;	/* Set in PIO mode */
+-	AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT;	/* Configure in output */
+-	/* Set Output */
+-	AT91C_BASE_PIOB->PIO_SODR = DATAFLASH_MMC_SELECT;
++void AT91F_SelectMMC(void) 
++{
++#ifdef	CONFIG_CMD_AT91_SPIMUX
++	at91_set_gpio_output(DATAFLASH_MMC_SELECT, 1);	/* Set in PIO mode and select SD-Card*/
+ #endif
+ }
+ 
+ void AT91F_SelectSPI(void) {
+-#ifdef	DATAFLASH_MMC_SELECT
+-	AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT;	/* Set in PIO mode */
+-	AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT;	/* Configure in output */
+-	/* Clear Output */
+-	AT91C_BASE_PIOB->PIO_CODR = DATAFLASH_MMC_SELECT;
++#ifdef	CONFIG_CMD_AT91_SPIMUX
++	at91_set_gpio_output(DATAFLASH_MMC_SELECT, 0);	/* Set in PIO mode and select SPI */
+ #endif
+ }
++
+
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-004-at91rm9200ek.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-004-at91rm9200ek.patch
new file mode 100644
index 000000000..4d22c5334
--- /dev/null
+++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-004-at91rm9200ek.patch
@@ -0,0 +1,536 @@
+diff -urN u-boot-2009.01-0rig/include/configs/at91rm9200df.h u-boot-2009.01/include/configs/at91rm9200df.h
+--- u-boot-2009.01-0rig/include/configs/at91rm9200df.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/include/configs/at91rm9200df.h	2009-01-01 21:19:17.000000000 +0100
+@@ -0,0 +1,261 @@
++/*
++ * Rick Bronson <rick@efn.org>
++ *
++ * Ulf Samuelsson <ulf.samuelsson@atmel.com>
++ *
++ * Configuration settings for the AT91RM9200EK board.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++#define	AT91RM9200_BOARD	MACH_TYPE_AT91RM9200DF
++#define	CONFIG_HOSTNAME		at91rm9200df
++/* ARM asynchronous clock */
++#define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
++#define AT91C_MASTER_CLOCK	59904000	/* peripheral clock (AT91C_MASTER_CLOCK / 3) */
++/* #define AT91C_MASTER_CLOCK	44928000 */	/* peripheral clock (AT91C_MASTER_CLOCK / 4) */
++
++#define AT91_SLOW_CLOCK		32768	/* slow clock */
++
++#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
++#define	CONFIG_AT91		1	/* THis is an ARM from the AT91 family */
++#define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
++#define CONFIG_AT91RM9200DF	1	/* Generic AT91RM9200 Board running from Dataflashcard	*/
++#undef  CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
++#define USE_920T_MMU		1
++
++#define CONFIG_SKIP_LOWLEVEL_INIT	/* Already done by dataflashboot */
++
++#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
++#define CONFIG_SETUP_MEMORY_TAGS 1
++#define CONFIG_INITRD_TAG	1
++
++#ifndef CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_USE_MAIN_OSCILLATOR		1
++/* flash */
++#define MC_PUIA_VAL	0x00000000
++#define MC_PUP_VAL	0x00000000
++#define MC_PUER_VAL	0x00000000
++#define MC_ASR_VAL	0x00000000
++#define MC_AASR_VAL	0x00000000
++#define EBI_CFGR_VAL	0x00000000
++#define SMC_CSR0_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */
++
++/* clocks */
++#define PLLAR_VAL	0x20263E04 /* 179.712000 MHz for PCK */
++#define PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
++#define MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
++
++/* sdram */
++#define PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
++#define PIOC_BSR_VAL	0x00000000
++#define PIOC_PDR_VAL	0xFFFF0000
++#define EBI_CSA_VAL	0x00000002 /* CS1=SDRAM */
++#define SDRC_CR_VAL	0x2188c155 /* set up the SDRAM */
++#define SDRAM		0x20000000 /* address of the SDRAM */
++#define SDRAM1		0x20000080 /* address of the SDRAM */
++#define SDRAM_VAL	0x00000000 /* value written to SDRAM */
++#define SDRC_MR_VAL	0x00000002 /* Precharge All */
++#define SDRC_MR_VAL1	0x00000004 /* refresh */
++#define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
++#define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
++#define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
++#else
++#define CONFIG_SKIP_RELOCATE_UBOOT
++#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
++/*
++ * Size of malloc() pool
++ */
++#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
++#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
++
++#define CONFIG_BAUDRATE 115200
++
++/*
++ * Hardware drivers
++ */
++
++/* define one of these to choose the DBGU, USART0  or USART1 as console */
++#define CONFIG_DBGU
++#undef CONFIG_USART0
++#undef CONFIG_USART1
++
++#undef	CONFIG_HWFLOW			/* don't include RTS/CTS flow control support	*/
++
++#undef	CONFIG_MODEM_SUPPORT		/* disable modem initialization stuff */
++
++#define CONFIG_BOOTDELAY      3
++/* #define CONFIG_ENV_OVERWRITE	1 */
++
++
++/*
++ * BOOTP options
++ */
++#define CONFIG_BOOTP_BOOTFILESIZE
++#define CONFIG_BOOTP_BOOTPATH
++#define CONFIG_BOOTP_GATEWAY
++#define CONFIG_BOOTP_HOSTNAME
++
++
++/*
++ * Command line configuration.
++ */
++#include <config_cmd_default.h>
++
++#define CONFIG_CMD_DHCP
++#define CONFIG_CMD_MII
++#define CONFIG_CMD_NAND
++#define CONFIG_CMD_AT91_SPIMUX
++#define CONFIG_CMD_ETHINIT
++
++#define CONFIG_DOS_PARTITION		1
++#define CONFIG_MMC			1
++#define CONFIG_SUPPORT_VFAT		1
++#define CONFIG__MMC_BASE			0xFFFB4000	/* From AT91RM9200.h*/
++#define CONFIG__MMC_BLOCKSIZE		512
++
++#define CONFIG_NAND_LEGACY
++
++#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
++#define SECTORSIZE 512
++
++#define ADDR_COLUMN 1
++#define ADDR_PAGE 2
++#define ADDR_COLUMN_PAGE 3
++
++#define NAND_ChipID_UNKNOWN	0x00
++#define NAND_MAX_FLOORS 1
++#define NAND_MAX_CHIPS 1
++
++#define AT91_SMART_MEDIA_ALE (1 << 22)	/* our ALE is AD22 */
++#define AT91_SMART_MEDIA_CLE (1 << 21)	/* our CLE is AD21 */
++
++#include <asm/arch/AT91RM9200.h>	/* needed for port definitions */
++#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
++#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
++
++#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2))
++
++#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0)
++#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0)
++#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
++#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
++/* the following are NOP's in our implementation */
++#define NAND_CTL_CLRALE(nandptr)
++#define NAND_CTL_SETALE(nandptr)
++#define NAND_CTL_CLRCLE(nandptr)
++#define NAND_CTL_SETCLE(nandptr)
++
++#define CONFIG_NR_DRAM_BANKS 1
++#define PHYS_SDRAM 0x20000000
++#define PHYS_SDRAM_SIZE 0x2000000  /* 32 megs */
++
++#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
++#define CONFIG_SYS_MEMTEST_END			CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
++
++#define CONFIG_DRIVER_ETHER
++#define CONFIG_NET_RETRY_COUNT		20
++#define CONFIG_AT91C_USE_RMII
++
++/* AC Characteristics */
++/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
++#define DATAFLASH_TCSS	(0xC << 16)
++#define DATAFLASH_TCHS	(0x1 << 24)
++
++#define CONFIG_HAS_DATAFLASH		1
++#undef BOARD_LATE_INIT
++
++#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
++#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
++#define CONFIG_SYS_MAX_DATAFLASH_PAGES		16384
++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* Logical adress for CS3 */
++#define CONFIG__SUPPORT_BLOCK_ERASE		1
++
++#define PHYS_FLASH_1			0x10000000
++#define PHYS_FLASH_SIZE			0x800000  /* 2 megs main flash */
++#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
++#define CONFIG_SYS_MAX_FLASH_BANKS		1
++#define CONFIG_SYS_MAX_FLASH_SECT		256
++#define CONFIG_SYS_FLASH_ERASE_TOUT		(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
++#define CONFIG_SYS_FLASH_WRITE_TOUT		(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
++
++#define	CONFIG_ENV_IS_IN_DATAFLASH
++#define	CONFIG_NEW_PARTITION		1
++
++#ifdef CONFIG_ENV_IS_IN_DATAFLASH
++#ifdef	CONFIG_NEW_PARTITION		
++#define CONFIG_ENV_OFFSET		0x21000
++#define CONFIG_ENV_ADDR			(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
++#define CONFIG_ENV_SIZE			0x2000  /* 8 * 1056 really , but start.s is not OK with this*/
++#else
++#define CONFIG_ENV_OFFSET		0x20000
++#define CONFIG_ENV_ADDR			(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
++#define CONFIG_ENV_SIZE			0x2000  /* 0x8000 */
++#endif
++#else
++#define CONFIG_ENV_IS_IN_FLASH		1
++#ifdef CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0xe000)  /* between boot.bin and u-boot.bin.gz */
++#define CONFIG_ENV_SIZE			0x2000  /* 0x8000 */
++#else
++#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x60000)  /* after u-boot.bin */
++#define CONFIG_ENV_SIZE			0x10000 /* sectors are 64K here */
++#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
++#endif	/* CONFIG_ENV_IS_IN_DATAFLASH */
++
++#if defined(CONFIG_AT91RM9200DK)
++#define	DATAFLASH_MMC_SELECT		AT91_PIN_PB7
++#else
++#define	DATAFLASH_MMC_SELECT		AT91_PIN_PB22
++#endif
++
++#define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
++
++#ifdef CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_BOOT_SIZE		0x6000 /* 24 KBytes */
++#define CONFIG_SYS_U_BOOT_BASE		(PHYS_FLASH_1 + 0x10000)
++#define CONFIG_SYS_U_BOOT_SIZE		0x10000 /* 64 KBytes */
++#else
++#define CONFIG_SYS_BOOT_SIZE		0x00 /* 0 KBytes */
++#define CONFIG_SYS_U_BOOT_BASE		PHYS_FLASH_1
++#define CONFIG_SYS_U_BOOT_SIZE		0x60000 /* 384 KBytes */
++#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
++
++#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 19200, 38400, 57600, 9600 }
++
++#define CONFIG_SYS_PROMPT		"U-Boot> "	/* Monitor Command Prompt */
++#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
++#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
++#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
++
++#define CONFIG_SYS_HZ 1000
++#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2	/* AT91C_TC0_CMR is implicitly set to */
++						/* AT91C_TC_TIMER_DIV1_CLOCK */
++
++#define CONFIG_STACKSIZE		(32*1024)	/* regular stack */
++#define CONFIG_STACKSIZE_IRQ  		(4*1024)        /* IRQ stack */
++#define CONFIG_STACKSIZE_FIQ  		(4*1024) 
++
++#ifdef CONFIG_USE_IRQ
++#error CONFIG_USE_IRQ not supported
++#endif
++#endif
+diff -urN u-boot-2009.01-0rig/include/configs/at91rm9200ek.h u-boot-2009.01/include/configs/at91rm9200ek.h
+--- u-boot-2009.01-0rig/include/configs/at91rm9200ek.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/include/configs/at91rm9200ek.h	2009-01-01 17:13:31.000000000 +0100
+@@ -0,0 +1,251 @@
++/*
++ * Rick Bronson <rick@efn.org>
++ *
++ * Ulf Samuelsson <ulf.samuelsson@atmel.com>
++ *
++ * Configuration settings for the AT91RM9200EK board.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++#define	AT91RM9200_BOARD	MACH_TYPE_AT91RM9200EK
++#define	CONFIG_HOSTNAME		at91rm9200ek
++/* ARM asynchronous clock */
++#define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
++#define AT91C_MASTER_CLOCK	59904000	/* peripheral clock (AT91C_MASTER_CLOCK / 3) */
++/* #define AT91C_MASTER_CLOCK	44928000 */	/* peripheral clock (AT91C_MASTER_CLOCK / 4) */
++
++#define AT91_SLOW_CLOCK		32768	/* slow clock */
++
++#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
++#define	CONFIG_AT91		1	/* THis is an ARM from the AT91 family */
++#define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
++#define CONFIG_AT91RM9200EK	1	/* on an AT91RM9200EK Board	*/
++#undef  CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
++#define USE_920T_MMU		1
++
++#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
++#define CONFIG_SETUP_MEMORY_TAGS 1
++#define CONFIG_INITRD_TAG	1
++
++#ifndef CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_USE_MAIN_OSCILLATOR		1
++/* flash */
++#define MC_PUIA_VAL	0x00000000
++#define MC_PUP_VAL	0x00000000
++#define MC_PUER_VAL	0x00000000
++#define MC_ASR_VAL	0x00000000
++#define MC_AASR_VAL	0x00000000
++#define EBI_CFGR_VAL	0x00000000
++#define SMC_CSR0_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */
++
++/* clocks */
++#define PLLAR_VAL	0x20263E04 /* 179.712000 MHz for PCK */
++#define PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
++#define MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
++
++/* sdram */
++#define PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
++#define PIOC_BSR_VAL	0x00000000
++#define PIOC_PDR_VAL	0xFFFF0000
++#define EBI_CSA_VAL	0x00000002 /* CS1=SDRAM */
++#define SDRC_CR_VAL	0x2188c155 /* set up the SDRAM */
++#define SDRAM		0x20000000 /* address of the SDRAM */
++#define SDRAM1		0x20000080 /* address of the SDRAM */
++#define SDRAM_VAL	0x00000000 /* value written to SDRAM */
++#define SDRC_MR_VAL	0x00000002 /* Precharge All */
++#define SDRC_MR_VAL1	0x00000004 /* refresh */
++#define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
++#define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
++#define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
++#else
++#define CONFIG_SKIP_RELOCATE_UBOOT
++#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
++/*
++ * Size of malloc() pool
++ */
++#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
++#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
++
++#define CONFIG_BAUDRATE 115200
++
++/*
++ * Hardware drivers
++ */
++
++/* define one of these to choose the DBGU, USART0  or USART1 as console */
++#define CONFIG_DBGU
++#undef CONFIG_USART0
++#undef CONFIG_USART1
++
++#undef	CONFIG_HWFLOW			/* don't include RTS/CTS flow control support	*/
++
++#undef	CONFIG_MODEM_SUPPORT		/* disable modem initialization stuff */
++
++#define CONFIG_BOOTDELAY      3
++/* #define CONFIG_ENV_OVERWRITE	1 */
++
++
++/*
++ * BOOTP options
++ */
++#define CONFIG_BOOTP_BOOTFILESIZE
++#define CONFIG_BOOTP_BOOTPATH
++#define CONFIG_BOOTP_GATEWAY
++#define CONFIG_BOOTP_HOSTNAME
++
++
++/*
++ * Command line configuration.
++ */
++#include <config_cmd_default.h>
++
++#define CONFIG_CMD_DHCP
++#define CONFIG_CMD_MII
++#define CONFIG_CMD_NAND
++#define CONFIG_CMD_AT91_SPIMUX
++#define CONFIG_CMD_ETHINIT
++
++#define CONFIG_NAND_LEGACY
++
++#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
++#define SECTORSIZE 512
++
++#define ADDR_COLUMN 1
++#define ADDR_PAGE 2
++#define ADDR_COLUMN_PAGE 3
++
++#define NAND_ChipID_UNKNOWN	0x00
++#define NAND_MAX_FLOORS 1
++#define NAND_MAX_CHIPS 1
++
++#define AT91_SMART_MEDIA_ALE (1 << 22)	/* our ALE is AD22 */
++#define AT91_SMART_MEDIA_CLE (1 << 21)	/* our CLE is AD21 */
++
++#include <asm/arch/AT91RM9200.h>	/* needed for port definitions */
++#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
++#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
++
++#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2))
++
++#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0)
++#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0)
++#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
++#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
++/* the following are NOP's in our implementation */
++#define NAND_CTL_CLRALE(nandptr)
++#define NAND_CTL_SETALE(nandptr)
++#define NAND_CTL_CLRCLE(nandptr)
++#define NAND_CTL_SETCLE(nandptr)
++
++#define CONFIG_NR_DRAM_BANKS 1
++#define PHYS_SDRAM 0x20000000
++#define PHYS_SDRAM_SIZE 0x2000000  /* 32 megs */
++
++#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
++#define CONFIG_SYS_MEMTEST_END			CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
++
++#define CONFIG_DRIVER_ETHER
++#define CONFIG_NET_RETRY_COUNT		20
++#define CONFIG_AT91C_USE_RMII
++
++/* AC Characteristics */
++/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
++#define DATAFLASH_TCSS	(0xC << 16)
++#define DATAFLASH_TCHS	(0x1 << 24)
++
++#define CONFIG_HAS_DATAFLASH		1
++#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
++#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
++#define CONFIG_SYS_MAX_DATAFLASH_PAGES		16384
++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* Logical adress for CS3 */
++#define CONFIG__SUPPORT_BLOCK_ERASE		1
++
++#define PHYS_FLASH_1			0x10000000
++#define PHYS_FLASH_SIZE			0x800000  /* 2 megs main flash */
++#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
++#define CONFIG_SYS_MAX_FLASH_BANKS		1
++#define CONFIG_SYS_MAX_FLASH_SECT		256
++#define CONFIG_SYS_FLASH_ERASE_TOUT		(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
++#define CONFIG_SYS_FLASH_WRITE_TOUT		(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
++
++#undef	CONFIG_ENV_IS_IN_DATAFLASH
++#define	CONFIG_NEW_PARTITION		1
++
++#ifdef CONFIG_ENV_IS_IN_DATAFLASH
++#ifdef	CONFIG_NEW_PARTITION		
++#define CONFIG__ENV_OFFSET			0x21000
++#define CONFIG__ENV_ADDR			(CONFIG_SYS__DATAFLASH_LOGIC_ADDR_CS0 + CONFIG__ENV_OFFSET)
++#define CONFIG__ENV_SIZE			0x2000  /* 8 * 1056 really , but start.s is not OK with this*/
++> #else
++#define CONFIG_ENV_OFFSET		0x20000
++#define CONFIG_ENV_ADDR			(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
++#define CONFIG_ENV_SIZE			0x2000  /* 0x8000 */
++#endif
++#else
++#define CONFIG_ENV_IS_IN_FLASH		1
++#ifdef CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0xe000)  /* between boot.bin and u-boot.bin.gz */
++#define CONFIG_ENV_SIZE			0x2000  /* 0x8000 */
++#else
++#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x60000)  /* after u-boot.bin */
++#define CONFIG_ENV_SIZE			0x10000 /* sectors are 64K here */
++#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
++#endif	/* CONFIG_ENV_IS_IN_DATAFLASH */
++
++#if defined(CONFIG_AT91RM9200DK)
++#define	DATAFLASH_MMC_SELECT		AT91_PIN_PB7
++#else
++#define	DATAFLASH_MMC_SELECT		AT91_PIN_PB22
++#endif
++
++#define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
++
++#ifdef CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_BOOT_SIZE		0x6000 /* 24 KBytes */
++#define CONFIG_SYS_U_BOOT_BASE		(PHYS_FLASH_1 + 0x10000)
++#define CONFIG_SYS_U_BOOT_SIZE		0x10000 /* 64 KBytes */
++#else
++#define CONFIG_SYS_BOOT_SIZE		0x00 /* 0 KBytes */
++#define CONFIG_SYS_U_BOOT_BASE		PHYS_FLASH_1
++#define CONFIG_SYS_U_BOOT_SIZE		0x60000 /* 384 KBytes */
++#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
++
++#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 19200, 38400, 57600, 9600 }
++
++#define CONFIG_SYS_PROMPT		"U-Boot> "	/* Monitor Command Prompt */
++#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
++#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
++#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
++
++#define CONFIG_SYS_HZ 1000
++#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2	/* AT91C_TC0_CMR is implicitly set to */
++						/* AT91C_TC_TIMER_DIV1_CLOCK */
++
++#define CONFIG_STACKSIZE		(32*1024)	/* regular stack */
++#define CONFIG_STACKSIZE_IRQ  		(4*1024)        /* IRQ stack */
++#define CONFIG_STACKSIZE_FIQ  		(4*1024) 
++
++#ifdef CONFIG_USE_IRQ
++#error CONFIG_USE_IRQ not supported
++#endif
++#endif
+diff -urN u-boot-2009.01-0rig/Makefile u-boot-2009.01/Makefile
+--- u-boot-2009.01-0rig/Makefile	2009-01-02 10:03:11.000000000 +0100
++++ u-boot-2009.01/Makefile	2009-01-01 21:31:34.000000000 +0100
+@@ -2568,6 +2568,12 @@
+ at91rm9200dk_config	:	unconfig
+ 	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
+ 
++at91rm9200df_config	:	unconfig
++	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
++
++at91rm9200ek_config	:	unconfig
++	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
++
+ cmc_pu2_config	:	unconfig
+ 	@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
+ 
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-005-at91sam9g20ek.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-005-at91sam9g20ek.patch
new file mode 100644
index 000000000..b87a655e6
--- /dev/null
+++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-005-at91sam9g20ek.patch
@@ -0,0 +1,801 @@
+diff -urN u-boot-2008.10-0rig/Makefile u-boot-2008.10/Makefile
+--- u-boot-2008.10-0rig/Makefile	2008-12-28 14:07:30.000000000 +0100
++++ u-boot-2008.10/Makefile	2008-12-28 14:06:28.000000000 +0100
+@@ -2541,6 +2541,22 @@
+ 	fi;
+ 	@$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
+ 
++at91sam9g20ek_nandflash_config \
++at91sam9g20ek_dataflash_cs0_config \
++at91sam9g20ek_dataflash_cs1_config \
++at91sam9g20ek_config	:	unconfig
++	@if [ "$(findstring _nandflash,$@)" ] ; then \
++		echo "#define CONFIG_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
++		$(XECHO) "... with environment variable in NAND FLASH" ; \
++	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
++		echo "#define CONFIG_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
++		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
++	else \
++		echo "#define CONFIG_USE_DATAFLASH_CS1 1"	>>$(obj)include/config.h ; \
++		$(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
++	fi;
++	@$(MKCONFIG) -a at91sam9g20ek arm arm926ejs at91sam9g20ek atmel at91
++
+ at91sam9261ek_nandflash_config \
+ at91sam9261ek_dataflash_cs0_config \
+ at91sam9261ek_dataflash_cs3_config \
+Index: include/configs/at91sam9g20ek.h
+===================================================================
+--- a/include/configs/at91sam9g20ek.h	(.../u-boot-1.3.4)	(revision 0)
++++ b/include/configs/at91sam9g20ek.h	(.../u-boot-1.3.4-exp)	(revision 8417)
+@@ -0,0 +1,198 @@
++/*
++ * (C) Copyright 2007-2008
++ * Stelian Pop <stelian.pop@leadtechdesign.com>
++ * Lead Tech Design <www.leadtechdesign.com>
++ *
++ * Configuation settings for the AT91SAM9G20EK board.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++/* ARM asynchronous clock */
++#define AT91_MAIN_CLOCK		396288000	/* from 18.432 MHz crystal */
++#define AT91_MASTER_CLOCK	132096000	/* peripheral = main / 3 */
++#define CONFIG_SYS_HZ			1000000		/* 1us resolution */
++
++#define AT91_SLOW_CLOCK		32768	/* slow clock */
++
++#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
++#define CONFIG_AT91SAM9G20	1	/* It's an Atmel AT91SAM9G20 SoC*/
++#define CONFIG_AT91SAM9G20EK	1	/* on an AT91SAM9G20EK Board	*/
++#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
++
++#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
++#define CONFIG_SETUP_MEMORY_TAGS 1
++#define CONFIG_INITRD_TAG	1
++
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SKIP_RELOCATE_UBOOT
++
++/*
++ * Hardware drivers
++ */
++#define CONFIG_ATMEL_USART	1
++#undef CONFIG_USART0
++#undef CONFIG_USART1
++#undef CONFIG_USART2
++#define CONFIG_USART3		1	/* USART 3 is DBGU */
++
++#define CONFIG_BOOTDELAY	3
++
++/*
++ * BOOTP options
++ */
++#define CONFIG_BOOTP_BOOTFILESIZE	1
++#define CONFIG_BOOTP_BOOTPATH		1
++#define CONFIG_BOOTP_GATEWAY		1
++#define CONFIG_BOOTP_HOSTNAME		1
++
++/*
++ * Command line configuration.
++ */
++#include <config_cmd_default.h>
++#undef CONFIG_CMD_BDI
++#undef CONFIG_CMD_IMI
++#undef CONFIG_CMD_AUTOSCRIPT
++#undef CONFIG_CMD_FPGA
++#undef CONFIG_CMD_LOADS
++#undef CONFIG_CMD_IMLS
++
++#define CONFIG_CMD_PING		1
++#define CONFIG_CMD_DHCP		1
++#define CONFIG_CMD_NAND
++#define CONFIG_CMD_USB		1
++
++/* SDRAM */
++#define CONFIG_NR_DRAM_BANKS		1
++#define PHYS_SDRAM			0x20000000
++#define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */
++
++/* DataFlash */
++#define CONFIG_HAS_DATAFLASH		1
++#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
++#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1	0xD0000000	/* CS1 */
++#define AT91_SPI_CLK			15000000
++#define DATAFLASH_TCSS			(0x22 << 16)
++#define DATAFLASH_TCHS			(0x1 << 24)
++#define AT91SAM9260_BASE_SPI0		0xfffc8000
++/* NAND flash */
++#define NAND_MAX_CHIPS			1
++#define CONFIG_SYS_MAX_NAND_DEVICE		1
++#define CONFIG_SYS_NAND_BASE			0x40000000
++#define CONFIG_SYS_NAND_DBW_8			1
++
++/* NOR flash - no real flash on this board */
++#define CONFIG_SYS_NO_FLASH			1
++
++/* Ethernet */
++#define CONFIG_MACB			1
++#define CONFIG_RMII			1
++#define CONFIG_NET_MULTI		1
++#define CONFIG_NET_RETRY_COUNT		20
++#define CONFIG_RESET_PHY_R		1
++#define AT91SAM9260_BASE_EMAC		0xfffc4000
++/* USB */
++#define CONFIG_USB_OHCI_NEW		1
++#define LITTLEENDIAN			1
++#define CONFIG_DOS_PARTITION		1
++#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
++#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9G20_UHP_BASE */
++#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9g20"
++#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
++#define CONFIG_USB_STORAGE		1
++
++#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
++
++#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
++#define CONFIG_SYS_MEMTEST_END			0x23e00000
++
++#ifdef CONFIG_USE_DATAFLASH_CS0
++
++/* bootstrap + u-boot + env + linux in dataflash on CS0 */
++#define CONFIG_ENV_IS_IN_DATAFLASH	1
++#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
++#define CONFIG_ENV_OFFSET		0x4200
++#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
++#define CONFIG_ENV_SIZE		0x4200
++#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
++#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
++				"root=/dev/mtdblock0 "			\
++				"mtdparts=at91_nand:-(root) "		\
++				"rw rootfstype=jffs2"
++
++#elif CONFIG_USE_DATAFLASH_CS1
++
++/* bootstrap + u-boot + env + linux in dataflash on CS1 */
++#define CONFIG_ENV_IS_IN_DATAFLASH	1
++#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
++#define CONFIG_ENV_OFFSET		0x4200
++#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
++#define CONFIG_ENV_SIZE		0x4200
++#define CONFIG_BOOTCOMMAND	"cp.b 0xD0042000 0x22000000 0x210000; bootm"
++#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
++				"root=/dev/mtdblock0 "			\
++				"mtdparts=at91_nand:-(root) "		\
++				"rw rootfstype=jffs2"
++
++#else /* CONFIG_USE_NANDFLASH */
++
++/* bootstrap + u-boot + env + linux in nandflash */
++#define CONFIG_ENV_IS_IN_NAND	1
++#define CONFIG_ENV_OFFSET		0x60000
++#define CONFIG_ENV_OFFSET_REDUND	0x80000
++#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
++#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
++#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
++				"root=/dev/mtdblock5 "			\
++				"mtdparts=at91_nand:128k(bootstrap)ro,"	\
++				"256k(uboot)ro,128k(env1)ro,"		\
++				"128k(env2)ro,2M(linux),-(root) "	\
++				"rw rootfstype=jffs2"
++
++#endif
++
++#define CONFIG_BAUDRATE		115200
++#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
++
++#define CONFIG_SYS_PROMPT		"U-Boot> "
++#define CONFIG_SYS_CBSIZE		256
++#define CONFIG_SYS_MAXARGS		16
++#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
++#define CONFIG_SYS_LONGHELP		1
++#define CONFIG_CMDLINE_EDITING	1
++
++#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
++/*
++ * Size of malloc() pool
++ */
++#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
++#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
++
++#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
++
++#ifdef CONFIG_USE_IRQ
++#error CONFIG_USE_IRQ not supported
++#endif
++
++#endif
+Index: board/atmel/at91sam9g20ek/nand.c
+===================================================================
+--- a/board/atmel/at91sam9g20ek/nand.c	(.../u-boot-1.3.4)	(revision 0)
++++ b/board/atmel/at91sam9g20ek/nand.c	(.../u-boot-1.3.4-exp)	(revision 8417)
+@@ -0,0 +1,78 @@
++/*
++ * (C) Copyright 2007-2008
++ * Stelian Pop <stelian.pop@leadtechdesign.com>
++ * Lead Tech Design <www.leadtechdesign.com>
++ *
++ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <asm/arch/at91sam9260.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/at91_pio.h>
++
++#include <nand.h>
++
++/*
++ *	hardware specific access to control-lines
++ */
++#define	MASK_ALE	(1 << 21)	/* our ALE is AD21 */
++#define	MASK_CLE	(1 << 22)	/* our CLE is AD22 */
++
++static void at91sam9g20ek_nand_hwcontrol(struct mtd_info *mtd,
++					 int cmd, unsigned int ctrl)
++{
++	struct nand_chip *this = mtd->priv;
++
++	if (ctrl & NAND_CTRL_CHANGE) {
++		ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
++		IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
++
++		if (ctrl & NAND_CLE)
++			IO_ADDR_W |= MASK_CLE;
++		if (ctrl & NAND_ALE)
++			IO_ADDR_W |= MASK_ALE;
++
++		at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE));
++		this->IO_ADDR_W = (void *) IO_ADDR_W;
++	}
++
++	if (cmd != NAND_CMD_NONE)
++		writeb(cmd, this->IO_ADDR_W);
++}
++
++static int at91sam9g20ek_nand_ready(struct mtd_info *mtd)
++{
++	return at91_get_gpio_value(AT91_PIN_PC13);
++}
++
++int board_nand_init(struct nand_chip *nand)
++{
++	nand->ecc.mode = NAND_ECC_SOFT;
++#ifdef CONFIG_SYS_NAND_DBW_16
++	nand->options = NAND_BUSWIDTH_16;
++#endif
++	nand->cmd_ctrl = at91sam9g20ek_nand_hwcontrol;
++	nand->dev_ready = at91sam9g20ek_nand_ready;
++	nand->chip_delay = 20;
++
++	return 0;
++}
+Index: board/atmel/at91sam9g20ek/at91sam9g20ek.c
+===================================================================
+--- a/board/atmel/at91sam9g20ek/at91sam9g20ek.c	(.../u-boot-1.3.4)	(revision 0)
++++ b/board/atmel/at91sam9g20ek/at91sam9g20ek.c	(.../u-boot-1.3.4-exp)	(revision 8417)
+@@ -0,0 +1,250 @@
++/*
++ * (C) Copyright 2007-2008
++ * Stelian Pop <stelian.pop@leadtechdesign.com>
++ * Lead Tech Design <www.leadtechdesign.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <asm/arch/at91sam9260.h>
++#include <asm/arch/at91sam9260_matrix.h>
++#include <asm/arch/at91sam9_smc.h>
++#include <asm/arch/at91_pmc.h>
++#include <asm/arch/at91_rstc.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/io.h>
++#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
++#include <net.h>
++#endif
++#include <netdev.h>
++DECLARE_GLOBAL_DATA_PTR;
++
++/* ------------------------------------------------------------------------- */
++/*
++ * Miscelaneous platform dependent initialisations
++ */
++
++static void at91sam9g20ek_serial_hw_init(void)
++{
++#ifdef CONFIG_USART0
++	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD0 */
++	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD0 */
++	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
++#endif
++
++#ifdef CONFIG_USART1
++	at91_set_A_periph(AT91_PIN_PB6, 1);		/* TXD1 */
++	at91_set_A_periph(AT91_PIN_PB7, 0);		/* RXD1 */
++	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
++#endif
++
++#ifdef CONFIG_USART2
++	at91_set_A_periph(AT91_PIN_PB8, 1);		/* TXD2 */
++	at91_set_A_periph(AT91_PIN_PB9, 0);		/* RXD2 */
++	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
++#endif
++
++#ifdef CONFIG_USART3	/* DBGU */
++	at91_set_A_periph(AT91_PIN_PB14, 0);		/* DRXD */
++	at91_set_A_periph(AT91_PIN_PB15, 1);		/* DTXD */
++	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
++#endif
++}
++
++#ifdef CONFIG_CMD_NAND
++static void at91sam9g20ek_nand_hw_init(void)
++{
++	unsigned long csa;
++
++	/* Enable CS3 */
++	csa = at91_sys_read(AT91_MATRIX_EBICSA);
++	at91_sys_write(AT91_MATRIX_EBICSA,
++		       csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
++
++	/* Configure SMC CS3 for NAND/SmartMedia */
++	at91_sys_write(AT91_SMC_SETUP(3),
++		       AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
++		       AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
++	at91_sys_write(AT91_SMC_PULSE(3),
++		       AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) |
++		       AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(3));
++	at91_sys_write(AT91_SMC_CYCLE(3),
++		       AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
++	at91_sys_write(AT91_SMC_MODE(3),
++		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
++		       AT91_SMC_EXNWMODE_DISABLE |
++#ifdef CONFIG_SYS_NAND_DBW_16
++		       AT91_SMC_DBW_16 |
++#else /* CONFIG_SYS_NAND_DBW_8 */
++		       AT91_SMC_DBW_8 |
++#endif
++		       AT91_SMC_TDF_(3));
++
++	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
++
++	/* Configure RDY/BSY */
++	at91_set_gpio_input(AT91_PIN_PC13, 1);
++
++	/* Enable NandFlash */
++	at91_set_gpio_output(AT91_PIN_PC14, 1);
++}
++#endif
++
++#ifdef CONFIG_HAS_DATAFLASH
++static void at91sam9g20ek_spi_hw_init(void)
++{
++	at91_set_A_periph(AT91_PIN_PA3, 0);	/* SPI0_NPCS0 */
++	at91_set_B_periph(AT91_PIN_PC11, 0);	/* SPI0_NPCS1 */
++
++	at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
++	at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
++	at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
++
++	/* Enable clock */
++	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0);
++}
++#endif
++
++#ifdef CONFIG_MACB
++static void at91sam9g20ek_macb_hw_init(void)
++{
++	/* Enable clock */
++	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
++
++	/*
++	 * Disable pull-up on:
++	 *	RXDV (PA17) => PHY normal mode (not Test mode)
++	 *	ERX0 (PA14) => PHY ADDR0
++	 *	ERX1 (PA15) => PHY ADDR1
++	 *	ERX2 (PA25) => PHY ADDR2
++	 *	ERX3 (PA26) => PHY ADDR3
++	 *	ECRS (PA28) => PHY ADDR4  => PHYADDR = 0x0
++	 *
++	 * PHY has internal pull-down
++	 */
++	writel(pin_to_mask(AT91_PIN_PA14) |
++	       pin_to_mask(AT91_PIN_PA15) |
++	       pin_to_mask(AT91_PIN_PA17) |
++	       pin_to_mask(AT91_PIN_PA25) |
++	       pin_to_mask(AT91_PIN_PA26) |
++	       pin_to_mask(AT91_PIN_PA28),
++	       pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
++
++	/* Need to reset PHY -> 500ms reset */
++	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
++				     (AT91_RSTC_ERSTL & (0x0D << 8)) |
++				     AT91_RSTC_URSTEN);
++
++	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
++
++	/* Wait for end hardware reset */
++	while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
++
++	/* Restore NRST value */
++	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
++				     (AT91_RSTC_ERSTL & (0x0 << 8)) |
++				     AT91_RSTC_URSTEN);
++
++	/* Re-enable pull-up */
++	writel(pin_to_mask(AT91_PIN_PA14) |
++	       pin_to_mask(AT91_PIN_PA15) |
++	       pin_to_mask(AT91_PIN_PA17) |
++	       pin_to_mask(AT91_PIN_PA25) |
++	       pin_to_mask(AT91_PIN_PA26) |
++	       pin_to_mask(AT91_PIN_PA28),
++	       pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
++
++	at91_set_A_periph(AT91_PIN_PA19, 0);	/* ETXCK_EREFCK */
++	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ERXDV */
++	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ERX0 */
++	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERX1 */
++	at91_set_A_periph(AT91_PIN_PA18, 0);	/* ERXER */
++	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ETXEN */
++	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ETX0 */
++	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ETX1 */
++	at91_set_A_periph(AT91_PIN_PA21, 0);	/* EMDIO */
++	at91_set_A_periph(AT91_PIN_PA20, 0);	/* EMDC */
++
++#ifndef CONFIG_RMII
++	at91_set_B_periph(AT91_PIN_PA28, 0);	/* ECRS */
++	at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECOL */
++	at91_set_B_periph(AT91_PIN_PA25, 0);	/* ERX2 */
++	at91_set_B_periph(AT91_PIN_PA26, 0);	/* ERX3 */
++	at91_set_B_periph(AT91_PIN_PA27, 0);	/* ERXCK */
++#if defined(CONFIG_AT91SAM9G20EK)
++	/*
++	 * use PA10, PA11 for ETX2, ETX3.
++	 * PA23 and PA24 are for TWI EEPROM
++	 */
++	at91_set_B_periph(AT91_PIN_PA10, 0);    /* ETX2 */
++	at91_set_B_periph(AT91_PIN_PA11, 0);    /* ETX3 */
++#else
++	at91_set_B_periph(AT91_PIN_PA23, 0);    /* ETX2 */
++	at91_set_B_periph(AT91_PIN_PA24, 0);    /* ETX3 */
++#endif
++	at91_set_B_periph(AT91_PIN_PA22, 0);	/* ETXER */
++#endif
++
++}
++#endif
++
++int board_init(void)
++{
++	/* Enable Ctrlc */
++	console_init_f();
++
++	/* arch number of AT91SAM9G20EK-Board */
++	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK;
++	/* adress of boot parameters */
++	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
++
++	at91sam9g20ek_serial_hw_init();
++#ifdef CONFIG_CMD_NAND
++	at91sam9g20ek_nand_hw_init();
++#endif
++#ifdef CONFIG_HAS_DATAFLASH
++	at91sam9g20ek_spi_hw_init();
++#endif
++#ifdef CONFIG_MACB
++	at91sam9g20ek_macb_hw_init();
++#endif
++
++	return 0;
++}
++
++int dram_init(void)
++{
++	gd->bd->bi_dram[0].start = PHYS_SDRAM;
++	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
++	return 0;
++}
++
++#ifdef CONFIG_RESET_PHY_R
++void reset_phy(void)
++{
++#ifdef CONFIG_MACB
++	/*
++	 * Initialize ethernet HW addr prior to starting Linux,
++	 * needed for nfsroot
++	 */
++	eth_init(gd->bd);
++#endif
++}
++#endif
+Index: board/atmel/at91sam9g20ek/led.c
+===================================================================
+--- a/board/atmel/at91sam9g20ek/led.c	(.../u-boot-1.3.4)	(revision 0)
++++ b/board/atmel/at91sam9g20ek/led.c	(.../u-boot-1.3.4-exp)	(revision 8417)
+@@ -0,0 +1,64 @@
++/*
++ * (C) Copyright 2007-2008
++ * Stelian Pop <stelian.pop@leadtechdesign.com>
++ * Lead Tech Design <www.leadtechdesign.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <asm/arch/at91sam9260.h>
++#include <asm/arch/at91_pmc.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/io.h>
++
++#define	RED_LED		AT91_PIN_PA9	/* this is the power led */
++#define	GREEN_LED	AT91_PIN_PA6	/* this is the user led */
++
++void red_LED_on(void)
++{
++	at91_set_gpio_value(RED_LED, 1);
++}
++
++void red_LED_off(void)
++{
++	at91_set_gpio_value(RED_LED, 0);
++}
++
++void green_LED_on(void)
++{
++	at91_set_gpio_value(GREEN_LED, 0);
++}
++
++void green_LED_off(void)
++{
++	at91_set_gpio_value(GREEN_LED, 1);
++}
++
++void coloured_LED_init(void)
++{
++	/* Enable clock */
++	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA);
++
++	at91_set_gpio_output(RED_LED, 1);
++	at91_set_gpio_output(GREEN_LED, 1);
++
++	at91_set_gpio_value(RED_LED, 0);
++	at91_set_gpio_value(GREEN_LED, 1);
++}
+Index: board/atmel/at91sam9g20ek/partition.c
+===================================================================
+--- a/board/atmel/at91sam9g20ek/partition.c	(.../u-boot-1.3.4)	(revision 0)
++++ b/board/atmel/at91sam9g20ek/partition.c	(.../u-boot-1.3.4-exp)	(revision 8417)
+@@ -0,0 +1,40 @@
++/*
++ * (C) Copyright 2008
++ * Ulf Samuelsson <ulf@atmel.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++#include <common.h>
++#include <config.h>
++#include <asm/hardware.h>
++#include <dataflash.h>
++
++AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
++
++struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
++	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
++	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1}
++};
++
++/*define the area offsets*/
++dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
++	{0x00000000, 0x000041FF, FLAG_PROTECT_SET,   0, "Bootstrap"},
++	{0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
++	{0x00008400, 0x00041FFF, FLAG_PROTECT_SET,   0, "U-Boot"},
++	{0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0,	"Kernel"},
++	{0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0,	"FS"},
++};
+Index: board/atmel/at91sam9g20ek/config.mk
+===================================================================
+--- a/board/atmel/at91sam9g20ek/config.mk	(.../u-boot-1.3.4)	(revision 0)
++++ b/board/atmel/at91sam9g20ek/config.mk	(.../u-boot-1.3.4-exp)	(revision 8417)
+@@ -0,0 +1 @@
++TEXT_BASE = 0x23f00000
+Index: board/atmel/at91sam9g20ek/Makefile
+===================================================================
+--- a/board/atmel/at91sam9g20ek/Makefile	(.../u-boot-1.3.4)	(revision 0)
++++ b/board/atmel/at91sam9g20ek/Makefile	(.../u-boot-1.3.4-exp)	(revision 8417)
+@@ -0,0 +1,57 @@
++#
++# (C) Copyright 2003-2008
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# (C) Copyright 2008
++# Stelian Pop <stelian.pop@leadtechdesign.com>
++# Lead Tech Design <www.leadtechdesign.com>
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB	= $(obj)lib$(BOARD).a
++
++COBJS-y	+= at91sam9g20ek.o
++COBJS-y	+= led.o
++COBJS-y	+= partition.o
++COBJS-$(CONFIG_CMD_NAND) += nand.o
++
++SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
++OBJS	:= $(addprefix $(obj),$(COBJS-y))
++SOBJS	:= $(addprefix $(obj),$(SOBJS))
++
++$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
++	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
++
++clean:
++	rm -f $(SOBJS) $(OBJS)
++
++distclean:	clean
++	rm -f $(LIB) core *.bak $(obj).depend
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+Index: include/asm-arm/arch-at91/hardware.h
+===================================================================
+--- a/include/asm-arm/arch-at91/hardware.h	(.../u-boot-1.3.4)	(revision 8417)
++++ b/include/asm-arm/arch-at91/hardware.h	(.../u-boot-1.3.4-exp)	(revision 8417)
+@@ -18,7 +18,7 @@
+ 
+ #if defined(CONFIG_AT91RM9200)
+ #include <asm/arch/at91rm9200.h>
+-#elif defined(CONFIG_AT91SAM9260)
++#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20)
+ #include <asm/arch/at91sam9260.h>
+ #define AT91_BASE_EMAC	AT91SAM9260_BASE_EMAC
+ #define AT91_BASE_SPI	AT91SAM9260_BASE_SPI0
+diff -urN u-boot-2008.10-0rig/include/asm-arm/mach-types.h u-boot-2008.10/include/asm-arm/mach-types.h
+--- u-boot-2008.10-0rig/include/asm-arm/mach-types.h	2008-10-18 21:30:31.000000000 +0200
++++ u-boot-2008.10/include/asm-arm/mach-types.h	2008-12-28 23:40:55.000000000 +0100
+@@ -23998,6 +23998,18 @@
+ # define machine_is_geneva()	(0)
+ #endif
+ 
++#ifdef CONFIG_MACH_AT91SAM9G20EK
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type __machine_arch_type
++# else
++#  define machine_arch_type MACH_TYPE_AT91SAM9G20EK
++# endif
++# define machine_is_at91sam9g20ek() (machine_arch_type == MACH_TYPE_AT91SAM9G20EK)
++#else
++# define machine_is_at91sam9g20ek() (0)
++#endif
++
+ /*
+  * These have not yet been registered
+  */
+diff -urN u-boot-2008.10-0rig/board/atmel/at91sam9g20ek/at91sam9g20ek.c u-boot-2008.10/board/atmel/at91sam9g20ek/at91sam9g20ek.c
+--- u-boot-2008.10-0rig/board/atmel/at91sam9g20ek/at91sam9g20ek.c	2008-12-28 14:09:52.000000000 +0100
++++ u-boot-2008.10/board/atmel/at91sam9g20ek/at91sam9g20ek.c	2008-12-28 23:56:09.000000000 +0100
+@@ -248,3 +248,13 @@
+ #endif
+ }
+ #endif
++
++int board_eth_init(bd_t *bis)
++{
++	int rc = 0;
++#ifdef CONFIG_MACB
++	rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00);
++#endif
++	return rc;
++}
++
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-006-drivers-net-macb.c.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-006-drivers-net-macb.c.patch
new file mode 100644
index 000000000..81ab7c6e6
--- /dev/null
+++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-006-drivers-net-macb.c.patch
@@ -0,0 +1,28 @@
+diff -urN u-boot-2008.10-0rig/drivers/net/macb.c u-boot-2008.10/drivers/net/macb.c
+--- u-boot-2008.10-0rig/drivers/net/macb.c	2008-10-18 21:30:31.000000000 +0200
++++ u-boot-2008.10/drivers/net/macb.c	2008-12-28 23:44:11.000000000 +0100
+@@ -415,18 +415,16 @@
+ 
+ 	/* choose RMII or MII mode. This depends on the board */
+ #ifdef CONFIG_RMII
+-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
+-    defined(CONFIG_AT91SAM9263)
+-	macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
+-#else
++#if defined(CONFIG_AVR32)
+ 	macb_writel(macb, USRIO, 0);
+-#endif
+ #else
+-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
+-    defined(CONFIG_AT91SAM9263)
+-	macb_writel(macb, USRIO, MACB_BIT(CLKEN));
++	macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
++#endif
+ #else
++#if defined(CONFIG_AVR32)
+ 	macb_writel(macb, USRIO, MACB_BIT(MII));
++#else
++	macb_writel(macb, USRIO, MACB_BIT(CLKEN));
+ #endif
+ #endif /* CONFIG_RMII */
+ 
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-007-tools.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-007-tools.patch
new file mode 100644
index 000000000..8f71ee043
--- /dev/null
+++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-007-tools.patch
@@ -0,0 +1,576 @@
+diff -urN u-boot-2008.10-0rig//tools/Makefile u-boot-2008.10/tools/Makefile
+--- u-boot-2008.10-0rig//tools/Makefile	2008-12-31 17:51:29.000000000 +0100
++++ u-boot-2008.10/tools/Makefile	2008-12-31 19:38:15.000000000 +0100
+@@ -37,6 +37,11 @@
+ #OBJ_FILES	+= mpc86x_clk.o
+ #endif
+ 
++ifeq ($(VENDOR),atmel)
++BINS+= raw-at91$(SFX) sx-at91$(SFX)
++OBJS+= raw-at91.o sx-at91.o
++endif
++
+ LIBFDT_OBJ_FILES	= $(obj)fdt.o $(obj)fdt_ro.o $(obj)fdt_rw.o $(obj)fdt_strerror.o $(obj)fdt_wip.o
+ 
+ LOGO_H	= $(OBJTREE)/include/bmp_logo.h
+@@ -175,6 +180,14 @@
+ 		$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
+ 		$(STRIP) $@
+ 
++$(obj)raw-at91$(SFX):	$(obj)raw-at91.o
++		$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
++		$(STRIP) $@
++
++$(obj)sx-at91$(SFX):	$(obj)sx-at91.o
++		$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
++		$(STRIP) $@
++
+ $(obj)envcrc.o:	$(src)envcrc.c
+ 		$(CC) -g $(CFLAGS) -c -o $@ $<
+ 
+@@ -223,6 +236,12 @@
+ $(obj)fdt_wip.o:	$(obj)fdt_wip.c
+ 		$(CC) -g $(FIT_CFLAGS) -c -o $@ $<
+ 
++$(obj)sx-at91.o:		$(src)sx-at91.c
++		$(CC) -g $(CFLAGS) -c -o $@ $<
++
++$(obj)raw-at91.o:	$(src)raw-at91.c
++		$(CC) -g $(CFLAGS) -c -o $@ $<
++
+ subdirs:
+ ifeq ($(TOOLSUBDIRS),)
+ 		@:
+diff -urN u-boot-2008.10-0rig//tools/raw-at91.c u-boot-2008.10/tools/raw-at91.c
+--- u-boot-2008.10-0rig//tools/raw-at91.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2008.10/tools/raw-at91.c	2008-12-31 19:26:23.000000000 +0100
+@@ -0,0 +1,225 @@
++/*
++ * xmodem-at91.c
++ *
++ * A simple program using xmodem/1kxmode upload file to at91rm9200 based board.
++ * Created by (C) Copyright 2004
++ * Linhang.Zhang, Jilin University of PR.China, linxing@jlu.edu.cn.
++ *
++ *************************************************************************************
++ *
++ * Modified 01-Feb-2005 (C)Copyright 2005
++ * Marco Cavallini, www.KoanSoftware.com - ITALY, m.cavallini@koansoftware.com
++ * - edited indentations and changed break usage in switch statement.
++ * - added "\r" to printf
++ *
++ * - build with 
++ *   gcc sx-at91.c -o sx-at91
++ *
++ * - Howto use this program with minicom/xminicom and AT91 
++ *   start minicom or xminicom
++ *   edit Options / File transfer protocol, 
++ *   add a name (for example J) like the following example
++ *
++ *   |     Name             Program                 Name U/D FullScr IO-Red. Multi  |
++ *   | A  zmodem     /usr/bin/sz -vv -b              Y    U    N       Y       Y    |
++ *   | B  ymodem     /usr/bin/sb -vv                 Y    U    N       Y       Y    |
++ *   | C  xmodem     /usr/bin/sx -vv                 Y    U    N       Y       N    |
++ *   | D  zmodem     /usr/bin/rz -vv -b -E           N    D    N       Y       Y    |
++ *   | E  ymodem     /usr/bin/rb -vv                 N    D    N       Y       Y    |
++ *   | F  xmodem     /usr/bin/rx -vv                 Y    D    N       Y       N    |
++ *   | G  kermit     /usr/bin/kermit -i -l %l -s     Y    U    Y       N       N    |
++ *   | H  kermit     /usr/bin/kermit -i -l %l -r     N    D    Y       N       N    |
++ *   | I  ascii      /usr/bin/ascii-xfr -dsv         Y    U    N       Y       N    |
++ *   | J  at91       /home/koan/xmodem/xs-at91       Y    U    Y       N       N    |
++ *   | K    -                                                                       |
++ *   | L    -                                                                       |
++ *
++ *   save and use it selecting at91 protocol when you start an Xmodem upload to AT91
++ *
++ *************************************************************************************
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include     <stdio.h>
++#include     <stdlib.h>
++#include     <string.h>
++#include     <unistd.h>
++#include     <sys/types.h>
++#include     <sys/stat.h>
++#include     <fcntl.h>
++#include     <termios.h>
++#include     <errno.h>
++#include     <time.h>
++
++#define	TRUE		1
++#define	FALSE		0
++#define LINESIZE	1024
++
++/*********/
++
++#define SERIAL_DEVICE "/dev/ttyS0"
++#define MYBAUDRATE B115200
++
++/***************SUB PROGRAM*******/
++
++int Initial_SerialPort(void)
++{
++	int fd;
++	struct termios options;
++
++	fd = open( SERIAL_DEVICE , O_RDWR | O_NOCTTY | O_NDELAY );
++	if ( fd == -1 )
++	{ 
++		/*open error!*/
++		perror("Can't open serial port!");
++		return -1;
++	}
++
++	/*Get the current options for the port...*/
++	tcgetattr(fd, &options);
++
++	/*Set the baud rates to BAUDRATE...*/
++	cfsetispeed(&options,MYBAUDRATE);
++	cfsetospeed(&options,MYBAUDRATE);
++	tcsetattr(fd, TCSANOW, &options);
++	if (0 != tcgetattr(fd, &options)) 
++	{
++		perror("SetupSerial 1");
++		return -1;
++	} 
++	
++	/*
++	 * 8bit Data,no partity,1 stop bit...
++	 */
++	options.c_cflag &= ~PARENB;
++	options.c_cflag &= ~CSTOPB;
++	options.c_cflag &= ~CSIZE;
++	options.c_cflag |= CS8;
++	tcflush(fd,TCIFLUSH);
++
++	/***Choosing Raw Input*/
++	options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
++	options.c_oflag &= ~OPOST; 
++
++	/*
++	 * Set the new options for the port...
++	 */
++	if (0 != tcsetattr(fd, TCSANOW, &options))
++	{
++ 		perror("SetupSerial error");
++ 		return -1 ;
++	}
++
++	return fd ;
++}
++
++/******************************/
++void ClearReceiveBuffer(int fd)
++{
++	unsigned char tmp;
++	while ((read(fd,&tmp,1))>0);
++	
++	return;
++}
++unsigned char filebuf[ LINESIZE+2 ];
++unsigned char outbuf[ LINESIZE+2 ];
++FILE *datafile;
++int fd;
++
++static	unsigned int	ChCnt=0;
++static	unsigned int	ChIx;
++unsigned char	GetChar(unsigned char *ch)
++/* 
++ * SUCCESS:	Return TRUE
++ * FAILURE:	Return FALSE
++ */
++{
++  
++  if(ChCnt == 0) {
++    ChCnt = fread( filebuf, sizeof(char), LINESIZE, datafile);
++    ChIx = 0;
++  }
++  if(ChCnt > 0) {
++    *ch = filebuf[ChIx++];
++    ChCnt--;
++    return TRUE;
++  } else {
++    return FALSE;	/* Reached End of File */
++  }
++}
++
++/********************************/
++void	delay()
++{
++}
++
++int main(int argc,char *argv[])
++{
++	char *data_file_name;
++	int	len;
++	unsigned char c;
++	int complete,i,sts;
++
++	printf("raw-at91 started...\r\n");
++	
++	/* open serial port1 */
++	if ( (fd = Initial_SerialPort()) == -1)  
++		return -1 ;
++
++	data_file_name = argv[1];
++
++	if((datafile=fopen(data_file_name,"rb"))==NULL)
++	{
++		perror ("Can't open file!");
++		return -1 ;
++	}
++
++	/*******************************/
++	
++	complete = 0;
++	/*	ClearReceiveBuffer(fd); */
++
++	/* while((read(fd,&ack_id,1))<=0);*/
++	
++	/* printf("%c\r\n",ack_id); */
++	while(!complete)
++	{
++	  for(i=0;i < LINESIZE; i++) {		/* A line more than 1024 characters will have problems...*/
++	    if((sts = GetChar(&outbuf[i]))) {
++	      /* Sts = Success */
++	      if((c = outbuf[i]) == '\n') {	/* Found end of Line - Start Processing*/
++		outbuf[i+1] = '\0';		/* Terminate String*/
++		break;
++	      }
++	    } else {
++	      /* Sts = Failure - End of File */
++	      outbuf[i] = '\n';
++	      outbuf[i+1] = '\0';
++	      complete = 1;
++	    }
++	  }
++	  printf("%s",outbuf);		/* Inform user */
++	  len = strlen((char *)outbuf);
++	  write(fd,outbuf,strlen((char *)outbuf));
++	  for(i = 0; i < 500000000; i++ ) delay();
++	  while((read(fd,&c,1))<=0) putchar(c);
++	  printf("  ");
++	}
++	fclose(datafile);
++	close(fd);
++	return 0;
++}
+diff -urN u-boot-2008.10-0rig//tools/sx-at91.c u-boot-2008.10/tools/sx-at91.c
+--- u-boot-2008.10-0rig//tools/sx-at91.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2008.10/tools/sx-at91.c	2008-12-31 19:26:23.000000000 +0100
+@@ -0,0 +1,300 @@
++/*
++ * xmodem-at91.c
++ *
++ * A simple program using xmodem/1kxmode upload file to at91rm9200 based board.
++ * Created by (C) Copyright 2004
++ * Linhang.Zhang, Jilin University of PR.China, linxing@jlu.edu.cn.
++ *
++ *************************************************************************************
++ *
++ * Modified 01-Feb-2005 (C)Copyright 2005
++ * Marco Cavallini, www.KoanSoftware.com - ITALY, m.cavallini@koansoftware.com
++ * - edited indentations and changed break usage in switch statement.
++ * - added "\r" to printf
++ *
++ * - build with 
++ *   gcc sx-at91.c -o sx-at91
++ *
++ * - Howto use this program with minicom/xminicom and AT91 
++ *   start minicom or xminicom
++ *   edit Options / File transfer protocol, 
++ *   add a name (for example J) like the following example
++ *
++ *   |     Name             Program                 Name U/D FullScr IO-Red. Multi  |
++ *   | A  zmodem     /usr/bin/sz -vv -b              Y    U    N       Y       Y    |
++ *   | B  ymodem     /usr/bin/sb -vv                 Y    U    N       Y       Y    |
++ *   | C  xmodem     /usr/bin/sx -vv                 Y    U    N       Y       N    |
++ *   | D  zmodem     /usr/bin/rz -vv -b -E           N    D    N       Y       Y    |
++ *   | E  ymodem     /usr/bin/rb -vv                 N    D    N       Y       Y    |
++ *   | F  xmodem     /usr/bin/rx -vv                 Y    D    N       Y       N    |
++ *   | G  kermit     /usr/bin/kermit -i -l %l -s     Y    U    Y       N       N    |
++ *   | H  kermit     /usr/bin/kermit -i -l %l -r     N    D    Y       N       N    |
++ *   | I  ascii      /usr/bin/ascii-xfr -dsv         Y    U    N       Y       N    |
++ *   | J  at91       /home/koan/xmodem/xs-at91       Y    U    Y       N       N    |
++ *   | K    -                                                                       |
++ *   | L    -                                                                       |
++ *
++ *   save and use it selecting at91 protocol when you start an Xmodem upload to AT91
++ *
++ *************************************************************************************
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include     <stdio.h>
++#include     <stdlib.h>
++#include     <unistd.h>
++#include     <sys/types.h>
++#include     <sys/stat.h>
++#include     <fcntl.h>
++#include     <termios.h>
++#include     <errno.h>
++#include     <time.h>
++
++/*
++Xmodem Frame form: <SOH><blk #><255-blk #><--128 data bytes--><CRC hi><CRC lo>
++*/
++
++#define XMODEM_SOH 0x01
++#define XMODEM_STX 0x02
++#define XMODEM_EOT 0x04
++#define XMODEM_ACK 0x06
++#define XMODEM_NAK 0x15
++#define XMODEM_CRC_CHR	'C'
++#define XMODEM_CRC_SIZE 2			/* Crc_High Byte + Crc_Low Byte */
++#define XMODEM_FRAME_ID_SIZE 2 /* Frame_Id + 255-Frame_Id */
++#define XMODEM_DATA_SIZE_SOH 128  /* for Xmodem protocol */
++#define XMODEM_DATA_SIZE_STX 1024 /* for 1K xmodem protocol */
++#define USE_1K_XMODEM 0  /* 1 for use 1k_xmodem 0 for xmodem */
++
++#if (USE_1K_XMODEM)
++	#define XMODEM_DATA_SIZE 	XMODEM_DATA_SIZE_STX
++	#define XMODEM_HEAD		XMODEM_STX
++#else
++	#define XMODEM_DATA_SIZE 	XMODEM_DATA_SIZE_SOH
++	#define XMODEM_HEAD 		XMODEM_SOH
++#endif
++/*********/
++
++#define SERIAL_DEVICE "/dev/ttyS0"
++#define MYBAUDRATE B115200
++
++/***************SUB PROGRAM*******/
++unsigned short GetCrc16 ( char *ptr, unsigned short count )
++{
++	unsigned short crc, i;
++
++	crc = 0;
++	while(count--)
++	{
++		crc = crc ^ (int) *ptr++ << 8;
++	
++		for(i = 0; i < 8; i++)
++		{
++			if(crc & 0x8000)
++				crc = crc << 1 ^ 0x1021;
++			else			
++				crc = crc << 1;
++		}
++	}
++
++	return (crc & 0xFFFF);
++}
++
++/*******************************/
++int Initial_SerialPort(void)
++{
++	int fd;
++	struct termios options;
++
++	fd = open( SERIAL_DEVICE , O_RDWR | O_NOCTTY | O_NDELAY );
++	if ( fd == -1 )
++	{ 
++		/*open error!*/
++		perror("Can't open serial port!");
++		return -1;
++	}
++
++	/*Get the current options for the port...*/
++	tcgetattr(fd, &options);
++
++	/*Set the baud rates to BAUDRATE...*/
++	cfsetispeed(&options,MYBAUDRATE);
++	cfsetospeed(&options,MYBAUDRATE);
++	tcsetattr(fd, TCSANOW, &options);
++	if (0 != tcgetattr(fd, &options)) 
++	{
++		perror("SetupSerial 1");
++		return -1;
++	} 
++	
++	/*
++	 * 8bit Data,no partity,1 stop bit...
++	 */
++	options.c_cflag &= ~PARENB;
++	options.c_cflag &= ~CSTOPB;
++	options.c_cflag &= ~CSIZE;
++	options.c_cflag |= CS8;
++	tcflush(fd,TCIFLUSH);
++
++	/***Choosing Raw Input*/
++	options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
++	options.c_oflag &= ~OPOST; 
++
++	/*
++	 * Set the new options for the port...
++	 */
++	if (0 != tcsetattr(fd, TCSANOW, &options))
++	{
++ 		perror("SetupSerial error");
++ 		return -1 ;
++	}
++
++	return fd ;
++}
++
++/******************************/
++void ClearReceiveBuffer(int fd)
++{
++	unsigned char tmp;
++	while ((read(fd,&tmp,1))>0);
++	
++	return;
++}
++
++/********************************/
++int main(int argc,char *argv[])
++{
++	int fd;
++	char *data_file_name;
++	char packet_data[ XMODEM_DATA_SIZE ];
++	char frame_data[ XMODEM_DATA_SIZE + XMODEM_CRC_SIZE + XMODEM_FRAME_ID_SIZE + 1 ];
++	FILE *datafile;
++	int complete,retry_num,pack_counter,read_number,write_number,i;
++	unsigned short crc_value;
++	unsigned char ack_id;
++
++	printf("sx-at91 started...\r\n");
++	
++	/* open serial port1 */
++	if ( (fd = Initial_SerialPort()) == -1)  
++		return -1 ;
++
++	data_file_name = argv[1];
++
++	if((datafile=fopen(data_file_name,"rb"))==NULL)
++	{
++		perror ("Can't open file!");
++		return -1 ;
++	}
++
++	/*******************************/
++	
++	pack_counter = 0;
++	complete = 0;
++	retry_num = 0;
++	ClearReceiveBuffer(fd);
++
++	while((read(fd,&ack_id,1))<=0);
++	
++	printf("%c\r\n",ack_id);
++	ack_id=XMODEM_ACK;
++	while(!complete)
++	{
++		switch(ack_id)
++		{
++		case XMODEM_ACK:
++			retry_num = 0;
++			pack_counter++;
++			read_number = fread( packet_data, sizeof(char), XMODEM_DATA_SIZE, datafile);
++			if(read_number>0)
++			{
++				if(read_number<XMODEM_DATA_SIZE_SOH)
++				{
++			
++					printf("Start filling the last frame!\r\n");
++					for(;read_number<XMODEM_DATA_SIZE;read_number++)
++						packet_data[read_number] = 0x00;
++				}
++				frame_data[0] = XMODEM_HEAD;
++				frame_data[1] = (char)pack_counter;
++				frame_data[2] = (char)(255-frame_data[1]);
++	
++				for(i=0;i<XMODEM_DATA_SIZE;i++)
++					frame_data[i+3]=packet_data[i];
++	
++				crc_value = GetCrc16(packet_data,XMODEM_DATA_SIZE);
++				frame_data[XMODEM_DATA_SIZE_SOH+3]=(unsigned char)(crc_value >> 8);
++				frame_data[XMODEM_DATA_SIZE_SOH+4]=(unsigned char)(crc_value);
++				write_number = write( fd, frame_data, XMODEM_DATA_SIZE_SOH + 5);
++				printf("waiting for ACK,%d,%d,...",pack_counter,write_number);
++				while((read(fd,&ack_id,1))<=0);
++			
++				if(ack_id == XMODEM_ACK)
++					printf("Ok!\r\n");
++				else
++					printf("Error!\r\n");
++			}
++			else
++			{
++				ack_id = XMODEM_EOT;
++				complete = 1;
++				printf("Waiting for complete ACK ...");
++			
++				while(ack_id != XMODEM_ACK)
++				{
++					ack_id = XMODEM_EOT;	
++					write_number=write(fd,&ack_id,1);
++					while((read(fd,&ack_id,1))<=0);
++				}
++				printf("OK\r\n");
++		
++				printf("Sending file complete\r\n");
++			}
++		break;
++
++		case XMODEM_NAK:
++			if( retry_num++ > 10) 
++			{
++				printf("Retry too many times,Quit!\r\n");
++				complete = 1;
++			}
++			else
++			{
++				write_number = write(fd,frame_data,XMODEM_DATA_SIZE + 5);
++				printf("Retry for ACK,%d,%d...",pack_counter,write_number);
++				while((read(fd,&ack_id,1))<=0);
++				
++				if( ack_id == XMODEM_ACK )
++					printf("OK\r\n");
++				else
++					printf("Error!\r\n");
++			}
++		break;
++
++		default:
++			printf("Fatal Error!\r\n");
++			complete = 1;
++		break;
++		}
++
++	}
++
++	fclose(datafile);
++	close(fd);
++
++	return 0;
++}
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-008-Makefile.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-008-Makefile.patch
new file mode 100644
index 000000000..176eed55d
--- /dev/null
+++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-008-Makefile.patch
@@ -0,0 +1,64 @@
+diff -urN u-boot-2008.10-0rig//Makefile u-boot-2008.10/Makefile
+--- u-boot-2008.10-0rig//Makefile	2008-12-31 18:11:18.000000000 +0100
++++ u-boot-2008.10/Makefile	2008-12-31 18:39:58.000000000 +0100
+@@ -20,6 +20,7 @@
+ # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ # MA 02111-1307 USA
+ #
++BUILD_DATE= $(shell date +%F)
+ 
+ VERSION = 2008
+ PATCHLEVEL = 10
+@@ -294,6 +295,22 @@
+ ALL += $(obj)u-boot.ldr
+ endif
+ 
++ifneq ($(BOARDNAME),)
++BINARY := $(BOARDNAME)-u-boot-$(U_BOOT_VERSION)-$(BUILD_DATE)
++BINARY_BIN := $(obj)$(BINARY).bin
++BINARY_GZ  := $(obj)$(BINARY).gz
++ALL += $(BINARY_BIN)
++ALL += $(BINARY_GZ)
++else
++BINARY := u-boot
++BINARY_BIN := $(obj)$(BINARY).bin
++BINARY_GZ  := $(obj)$(BINARY).gz
++endif
++
++ifeq ($(DESTDIR),)
++DESTDIR=binaries
++endif
++
+ all:		$(ALL)
+ 
+ $(obj)u-boot.hex:	$(obj)u-boot
+@@ -302,9 +319,20 @@
+ $(obj)u-boot.srec:	$(obj)u-boot
+ 		$(OBJCOPY) -O srec $< $@
+ 
+-$(obj)u-boot.bin:	$(obj)u-boot
++$(BINARY_BIN):	$(obj)u-boot
+ 		$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+ 
++$(BINARY_GZ):	$(BINARY_BIN)
++		gzip -c $(BINARY_BIN) > $(BINARY_GZ)
++
++install:	all
++		-install -d	$(DESTDIR)
++		install		$(BINARY_BIN)	$(DESTDIR)
++
++tftp:		install
++		cp $(BINARY_GZ)				$(TFTPBOOT)/$(BINARY).gz
++		cp $(BINARY_BIN) 			$(TFTPBOOT)/$(BINARY).bin
++
+ $(obj)u-boot.ldr:	$(obj)u-boot
+ 		$(LDR) -T $(CONFIG_BFIN_CPU) -f -c $@ $< $(LDR_FLAGS)
+ 
+@@ -3295,6 +3324,7 @@
+ 		-o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
+ 		-print0 \
+ 		| xargs -0 rm -f
++	@rm -f $(obj)u-boot-*.gz
+ 	@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
+ 		$(obj)cscope.* $(obj)*.*~
+ 	@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-009-factory.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-009-factory.patch
new file mode 100644
index 000000000..7d1c958dc
--- /dev/null
+++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-009-factory.patch
@@ -0,0 +1,323 @@
+diff -urN u-boot-2009.01-0rig//common/cmd_factory.c u-boot-2009.01/common/cmd_factory.c
+--- u-boot-2009.01-0rig//common/cmd_factory.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/common/cmd_factory.c	2009-01-02 19:32:07.000000000 +0100
+@@ -0,0 +1,308 @@
++/*
++ * (C) Copyright 2000
++ * Ulf Samuelsson	<ulf.samuelsson@atmelcom>.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*
++ * Boot support
++ */
++#include <config.h>
++#include <common.h>
++#include <command.h>
++#include <dataflash.h>
++
++/* 
++ * 
++ * The typical use of this file, is to update config.h
++ * from an external build system
++ * 
++ */
++
++
++/*
++ * Macros to transform values
++ * into environment strings.
++ */
++#define XMK_STR(x)		#x
++#define MK_STR(x)		XMK_STR(x)
++
++void		setargs(void);
++
++int do_factory_defaults (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
++{
++#if	defined(CONFIG_ETHADDR)
++	setenv("ethaddr",	MK_STR(CONFIG_ETHADDR));
++#endif
++#if	defined(CONFIG_ETH1ADDR)
++	setenv("eth1addr",	MK_STR(CONFIG_ETH1ADDR));
++#endif
++#if	defined(CONFIG_HOSTNAME)
++	setenv("hostname",	MK_STR(CONFIG_HOSTNAME));
++#endif
++#if	defined(CONFIG_IPADDR)
++	setenv("ipaddr",	MK_STR(CONFIG_IPADDR));
++#endif
++#if	defined(CONFIG_SERVERIP)
++	setenv("serverip",	MK_STR(CONFIG_SERVERIP));
++#endif
++#if	defined(CONFIG_GATEWAY)
++	setenv("gatewayip",	MK_STR(CONFIG_GATEWAY));
++#endif
++#if	defined(CONFIG_NETMASK)
++	setenv("netmask",	MK_STR(CONFIG_NETMASK));
++#endif
++#if	defined(KERNEL_START)
++	setenv("kernel",	MK_STR(KERNEL_START));
++#endif
++#if	defined(KERNEL_LOCATION)
++	setenv("OS",		MK_STR(KERNEL_LOCATION));
++#endif
++#if	defined(FILESYSTEM_START)
++	setenv("ramdisk",	MK_STR(FILESYSTEM_START));
++	setenv("initrd",	MK_STR(FILESYSTEM_START)","MK_STR(FILESYSTEM_SIZE));
++#endif
++#if	defined(FILESYSTEM_LOCATION)
++	setenv("FS",		MK_STR(FS_LOCATION));
++#endif
++#if	defined(END_OF_FLASH)
++	setenv("endflash",	MK_STR(END_OF_FLASH));
++#endif
++#if	defined(CONFIG_LOAD_SCRIPTS)
++	/* By updating the "fs-date" environment variable and running "fs"
++	   You set "rd-1" and "rd-2"
++	*/ 
++	setenv("rd-1",		"rootfs.arm-"MK_STR(DATE)".ext2");
++	setenv("rd-2",		"rootfs.arm-"MK_STR(DATE)".jffs2");
++	setenv("rd-3",		"rootfs.arm-linux.ext2");
++	setenv("rd-4",		"rootfs.arm-linux.jffs2");
++	setenv("ver",		"1");
++
++	setenv("config",	"tftp  ${ramdisk} autoscript.${hostname} ; autoscr ${ramdisk} ");
++
++#if	defined(KERNEL_VERSION)
++	setenv("kernel-version",MK_STR(KERNEL_VERSION));
++#endif
++#if	defined(DATE)
++	setenv("kernel-date",	MK_STR(DATE));
++	setenv("fs-date",	MK_STR(DATE));
++	setenv("rd",		"rootfs.arm-"MK_STR(DATE)".ext2");
++#endif
++#if	defined(KERNEL_VERSION)
++	setenv("linux",		MK_STR(BOARD_NAME)"-linux-"MK_STR(KERNEL_VERSION)"-"MK_STR(DATE)".gz");
++#endif
++	setenv("get-ramdisk",	"tftp	${ramdisk}	${rd};		setenv rd-size	${filesize}");
++	setenv("store-ramdisk",	"cp.b	${ramdisk}	${FS}		${rd-size}");
++	setenv("load-ramdisk",	"cp.b	${FS}		${ramdisk}	${rd-size}");
++	setenv("flash-ramdisk",	"run	get-ramdisk;	run		store-ramdisk");
++
++	setenv("get-kernel",	"tftp	${kernel}	${linux};	setenv	kernel-size	${filesize}");
++	setenv("store-kernel",	"cp.b	${kernel}	${OS}		${kernel-size};		saveenv");
++	setenv("load-kernel",	"cp.b	${OS}		${kernel}	${kernel-size};		saveenv");
++	setenv("flash-kernel",	"run	get-kernel;	run		store-kernel");
++
++	setenv("get",		"run get-kernel		; run get-ramdisk");
++	setenv("flash",		"run flash-kernel	; run flash-ramdisk ; saveenv");
++	setenv("load",		"run load-kernel	; run load-ramdisk");
++
++	setenv("bootcmd",	"run load ; bootm "MK_STR(KERNEL_START));
++
++	setenv("fstype",	"ram");
++	setenv("flashfs",	"/dev/mtdblock2");
++	setenv("ramfs",		"/dev/ram");
++
++	setenv("rootfstype",	"jffs2");
++	setenv("access",	"rw");
++	setenv("ramdisk_size",	"15360");
++	setenv("console",	"ttyS0,115200");
++
++
++#if	defined(MEMORY_SIZE)
++	setenv("mem",		MK_STR(MEMORY_SIZE));
++#else
++	setenv("mem",		"32M");	/* Cautious default */
++#endif
++
++	setenv("update",	"os; fs; setargs");
++	setenv("cmpk",		"run flash-kernel; cp.b ${OS} ${ramdisk} ${kernel-size}; cmp ${kernel} ${ramdisk} ${kernel-size}"); 
++#endif	/* CONFIG_LOAD_SCRIPTS */
++#if	defined(CONFIG_AT91RM9200)
++	setenv("machid24",	"0x0fb");
++	setenv("machid26",	"0x2c1");
++	setenv("machid",	"0x2c1");
++	setenv("k24",		"setenv machid ${machid24}; os");
++	setenv("k26",		"setenv machid ${machid26}; os");
++#endif
++	AT91F_DataflashSetEnv ();
++#if	defined(CONFIG_LOAD_SCRIPTS)
++	setargs();
++#endif
++	return (saveenv() ? 1 : 0);
++}
++
++
++
++U_BOOT_CMD(
++	factory,	1,	1,	do_factory_defaults,
++	"factory\t- Create a default environment\n",
++	"\n"
++);
++
++#if	defined(CONFIG_LOAD_SCRIPTS)
++void		setargs(void)
++{
++	char cmd[512];
++	char fstype[512];
++
++	sprintf(fstype,getenv("fstype"));
++	if((fstype[0] != 'f') && (fstype[0] != 'r')) {
++		fstype[0] = 'r';
++	}
++
++	if(fstype[0] == 'f') {
++		sprintf(cmd,"root=%s rootfstype=%s ip=%s:%s:%s:%s console=%s,mem=%s",
++			getenv("flashfs"),
++			getenv("rootfstype"),
++			getenv("ipaddr"),
++			getenv("serverip"),
++			getenv("gatewayip"),
++			getenv("netmask"),
++			getenv("console"),
++			getenv("mem")
++		);
++		cmd[511] = '\0';
++		printf("len=%d: %s\n",strlen(cmd),cmd);
++		if(strlen(cmd) > 500) {
++			printf("Error: Environment too large during 'setargs'\n");
++		} else {
++			setenv("bootargs",cmd);
++			setenv("bootcmd",	"run load-kernel ; bootm 21000000");
++		}
++	} else if(fstype[0] == 'r') {
++		sprintf(cmd,"root=%s %s initrd=%s ramdisk_size=%s ip=%s:%s:%s:%s console=%s,mem=%s",
++			getenv("ramfs"),
++			getenv("access"),
++			getenv("initrd"),
++			getenv("ramdisk_size"),
++			getenv("ipaddr"),
++			getenv("serverip"),
++			getenv("gatewayip"),
++			getenv("netmask"),
++			getenv("console"),
++			getenv("mem")
++		);
++		printf("len=%d: %s\n",strlen(cmd),cmd);
++		cmd[511] = '\0';
++		if(strlen(cmd) > 500) {
++			printf("Error: Environment too large during 'setargs'\n");
++		} else {
++			setenv("bootargs",cmd);
++			setenv("bootcmd",	"run load ; bootm 21000000");
++		}
++	} else {
++		setenv("bootargs","no args");
++	}
++}
++
++int do_setargs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
++{
++	setargs();
++	return 0;
++}
++
++U_BOOT_CMD(
++	setargs,	1,	1,	do_setargs,
++	"setargs\t- Create a bootargs from:"
++	"fstype=flash:	(${flash} ${access} ${initrd} ${ramdisk_size}) "
++	"fstype=ram:	(${ram}   ${access} ${initrd} ${ramdisk_size}) "
++	"${ipaddr} ${serverip} ${gatewayip} ${netmask} "
++	"${console} ${mem}\n"
++	,	"\n"
++);
++
++int do_os (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
++{
++	char *kchip;
++	char *kdate;
++	char *kver;
++	char cmd[512];
++	kchip = getenv("hostname");
++	kdate = getenv("kernel-date");
++	kver = getenv("kernel-version");
++	if((strlen(kdate) + strlen(kver) + 32) >  500) {
++		printf("Error: Environment too large during 'os': ");
++		printf("len=%d\n", strlen(kdate) + strlen(kver) + 32);
++	} else if(kver != NULL) {
++		if(kdate != NULL) {
++			sprintf(cmd,"%s-linux-%s-%s.gz",kchip,kver,kdate);
++		} else {
++			sprintf(cmd,"%s-linux-%s.gz",kchip,kver);
++		}
++		printf("Setting kernel to %s\n",cmd);
++		setenv("linux",cmd);
++		return 0;
++	}
++	return 1;
++}
++
++U_BOOT_CMD(
++	os,	1,	1,	do_os,
++	"os\t- Select linux version  ${hostname}-linux-${kernel-name}-${kernel-date}\n"
++	,	"\n"
++);
++
++
++int do_fs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
++{
++	char *ver;
++	char *fsdate;
++	char *hostname;
++	char cmd[512];
++	fsdate		= getenv("fs-date");
++	hostname	= getenv("hostname");
++
++	if(fsdate != NULL) {
++		sprintf(cmd,"rootfs.arm-%s.ext2",fsdate);
++		setenv("rd-1",cmd);
++		sprintf(cmd,"rootfs.arm-%s.jffs2",fsdate);
++		setenv("rd-2",cmd);
++	}
++	ver = getenv("ver");		/* Find out which version we are using*/
++	if(cmd==NULL) {
++		setenv("ver","1");
++	}
++	ver = getenv("ver");		/* Find out which version we are using*/
++	sprintf(cmd,"rd-%s",ver);	/* create rd${ver}*/
++	ver=getenv(cmd);
++	sprintf(cmd,"%s",ver);
++	printf("Setting ramdisk to %s\n",cmd);
++	setenv("rd",cmd);
++	return 0;
++}
++
++
++U_BOOT_CMD(
++	fs,	1,	1,	do_fs,
++	"fs\t- Select ramdisk version == rd-${ver}\n"
++	,	"\n"
++);
++#endif /* #if	defined(CONFIG_LOAD_SCRIPTS) */
++
++
+diff -urN u-boot-2009.01-0rig//common/Makefile u-boot-2009.01/common/Makefile
+--- u-boot-2009.01-0rig//common/Makefile	2008-12-16 23:48:27.000000000 +0100
++++ u-boot-2009.01/common/Makefile	2009-01-02 19:17:16.000000000 +0100
+@@ -84,6 +84,7 @@
+ COBJS-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o
+ COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o
+ COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o
++COBJS-$(CONFIG_CMD_FACTORY) += cmd_factory.o
+ COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o
+ COBJS-$(CONFIG_CMD_FDC)$(CONFIG_CMD_FDOS) += cmd_fdc.o
+ COBJS-$(CONFIG_OF_LIBFDT) += cmd_fdt.o fdt_support.o
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-010-coloured_led.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-010-coloured_led.patch
new file mode 100644
index 000000000..5c1d29dce
--- /dev/null
+++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-010-coloured_led.patch
@@ -0,0 +1,196 @@
+diff -urN u-boot-2009.01-0rig//common/cmd_led.c u-boot-2009.01/common/cmd_led.c
+--- u-boot-2009.01-0rig//common/cmd_led.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/common/cmd_led.c	2009-01-03 23:39:57.000000000 +0100
+@@ -0,0 +1,84 @@
++/*
++ * (C) Copyright 2008
++ * Ulf Samuelsson <ulf.samuelsson@atmel.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*
++ * This file provides a shell like 'test' function to return
++ * true/false from an integer or string compare of two memory
++ * locations or a location and a scalar/literal.
++ * A few parts were lifted from bash 'test' command
++ */
++
++#include <common.h>
++#include <config.h>
++#include <command.h>
++#include <coloured_led.h>
++
++int do_led ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
++{
++	int	led;
++	/* Validate arguments */
++	if ((argc != 3)){
++		printf("Usage:\n%s\n", cmdtp->usage);
++		return 1;
++	}
++	if (strcmp(argv[1], "1") == 0) {
++		led = (1 << 0);
++	} else if (strcmp(argv[1], "2") == 0) {
++		led = (1 << 1);
++	} else if (strcmp(argv[1], "3") == 0) {
++		led = (1 << 2);
++	} else if (strcmp(argv[1], "green") == 0) {
++		led = (1 << 0);
++	} else if (strcmp(argv[1], "yellow") == 0) {
++		led = (1 << 1);
++	} else if (strcmp(argv[1], "red") == 0) {
++		led = (1 << 2);
++	} else if (strcmp(argv[1], "all") == 0) {
++		led = 7;
++	} else {
++		printf ("Usage:\n%s\n", cmdtp->usage);
++		return 1;
++	}
++
++	if (strcmp(argv[2], "off") == 0) {
++		if(led & 1) green_LED_off();
++		if(led & 2) yellow_LED_off();
++		if(led & 4) red_LED_off();		
++	} else if (strcmp(argv[2], "on") == 0) {
++		if(led & 1) green_LED_on();
++		if(led & 2) yellow_LED_on();
++		if(led & 4) red_LED_on();		
++	} else {
++		printf ("Usage:\n%s\n", cmdtp->usage);
++		return 1;
++	}
++
++	return 0;
++}
++
++U_BOOT_CMD(
++	led, 3, 1, do_led,
++	"led\t- [1|2|3|green|yellow|red|all] [on|off]\n",
++	"led [1|2|3|green|yellow|red|all] [on|off] sets /clears led 1,2,3\n"
++);
++
+diff -urN u-boot-2009.01-0rig//common/Makefile u-boot-2009.01/common/Makefile
+--- u-boot-2009.01-0rig//common/Makefile	2009-01-02 21:18:24.000000000 +0100
++++ u-boot-2009.01/common/Makefile	2009-01-03 23:41:53.000000000 +0100
+@@ -99,6 +99,7 @@
+ COBJS-$(CONFIG_CMD_IRQ) += cmd_irq.o
+ COBJS-$(CONFIG_CMD_ITEST) += cmd_itest.o
+ COBJS-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o
++COBJS-$(CONFIG_CMD_LED) += cmd_led.o
+ COBJS-$(CONFIG_CMD_LICENSE) += cmd_license.o
+ COBJS-y += cmd_load.o
+ COBJS-$(CONFIG_LOGBUFFER) += cmd_log.o
+diff -urN u-boot-2009.01-0rig//include/coloured_led.h u-boot-2009.01/include/coloured_led.h
+--- u-boot-2009.01-0rig//include/coloured_led.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/include/coloured_led.h	2009-01-03 23:39:19.000000000 +0100
+@@ -0,0 +1,62 @@
++/*
++ * (C) Copyright 2008
++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++ * 
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*
++ * The purpose of this code is to signal the operational status of a
++ * target which usually boots over the network; while running in
++ * PCBoot, a status LED is blinking. As soon as a valid BOOTP reply
++ * message has been received, the LED is turned off. The Linux
++ * kernel, once it is running, will start blinking the LED again,
++ * with another frequency.
++ */
++
++#ifndef _COLOURED_LED_H_
++#define	_COLOURED_LED_H_
++
++#ifdef CONFIG_COLOURED_LED
++
++/*
++ * Coloured LEDs API
++ */
++#ifndef	__ASSEMBLY__
++extern void	coloured_LED_init (void);
++extern void	red_LED_on(void);
++extern void	red_LED_off(void);
++extern void	green_LED_on(void);
++extern void	green_LED_off(void);
++extern void	yellow_LED_on(void);
++extern void	yellow_LED_off(void);
++#else
++	.extern LED_init
++	.extern red_LED_on
++	.extern red_LED_off
++	.extern yellow_LED_on
++	.extern yellow_LED_off
++	.extern green_LED_on
++	.extern green_LED_off
++#endif
++
++#endif	/* CONFIG_COLOURED_LED	*/
++
++#endif	/* _STATUS_COLOURED_H_	*/
++
+diff -urN u-boot-2009.01-0rig//include/status_led.h u-boot-2009.01/include/status_led.h
+--- u-boot-2009.01-0rig//include/status_led.h	2008-12-16 23:48:27.000000000 +0100
++++ u-boot-2009.01/include/status_led.h	2009-01-03 23:44:40.000000000 +0100
+@@ -383,27 +383,6 @@
+ # include <asm/status_led.h>
+ #endif
+ 
+-/*
+- * Coloured LEDs API
+- */
+-#ifndef	__ASSEMBLY__
+-extern void	coloured_LED_init (void);
+-extern void	red_LED_on(void);
+-extern void	red_LED_off(void);
+-extern void	green_LED_on(void);
+-extern void	green_LED_off(void);
+-extern void	yellow_LED_on(void);
+-extern void	yellow_LED_off(void);
+-#else
+-	.extern LED_init
+-	.extern red_LED_on
+-	.extern red_LED_off
+-	.extern yellow_LED_on
+-	.extern yellow_LED_off
+-	.extern green_LED_on
+-	.extern green_LED_off
+-#endif
+-
+ #endif	/* CONFIG_STATUS_LED	*/
+ 
+ #endif	/* _STATUS_LED_H_	*/
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-011-spimux.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-011-spimux.patch
new file mode 100644
index 000000000..8ab469fd8
--- /dev/null
+++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-011-spimux.patch
@@ -0,0 +1,93 @@
+diff -urN u-boot-2009.01-0rig//common/cmd_mux.c u-boot-2009.01/common/cmd_mux.c
+--- u-boot-2009.01-0rig//common/cmd_mux.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/common/cmd_mux.c	2009-01-04 00:17:19.000000000 +0100
+@@ -0,0 +1,78 @@
++/*
++ * (C) Copyright 2008
++ * Ulf Samuelsson <ulf.samuelsson@atmel.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <command.h>
++#if (defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF))
++
++#include <asm/arch/AT91RM9200.h>
++#include <dataflash.h>
++#include <at45.h>
++
++
++static int mmc_nspi (const char *s)
++{
++	if (strcmp(s, "mmc") == 0) {
++		return (1);
++	} else if (strcmp(s, "spi") == 0) {
++		return (0);
++	}
++	return (-1);
++}
++
++int do_mux ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
++{
++	switch (argc) {
++	case 2:			/* on / off	*/
++		switch (mmc_nspi(argv[1])) {
++#if 0	/* prevented by varargs handling; FALLTROUGH is harmless, too */
++		default: printf ("Usage:\n%s\n", cmdtp->usage);
++			return;
++#endif
++		case 0:	AT91F_SelectSPI ();
++			break;
++		case 1:	AT91F_SelectMMC ();
++			break;
++		}
++		/* FALL TROUGH */
++	case 1:			/* get status */
++		printf ("Mux is configured to be %s\n",
++			AT91F_GetMuxStatus() ? "MMC" : "SPI");
++		return 0;
++	default:
++		printf ("Usage:\n%s\n", cmdtp->usage);
++		return 1;
++	}
++	return 0;
++}
++
++
++U_BOOT_CMD(
++	mux,   2,   1,     do_mux,
++	"mux\t- enable or disable MMC or SPI\n",
++	"[mmc, spi]\n"
++	"    - enable or disable MMC or SPI\n"
++);
++
++#endif	/* CONFIG_CMD_MUX */
++
+diff -urN u-boot-2009.01-0rig//common/Makefile u-boot-2009.01/common/Makefile
+--- u-boot-2009.01-0rig//common/Makefile	2009-01-04 00:10:28.000000000 +0100
++++ u-boot-2009.01/common/Makefile	2009-01-04 00:20:39.000000000 +0100
+@@ -112,6 +112,7 @@
+ COBJS-$(CONFIG_CMD_MISC) += cmd_misc.o
+ COBJS-$(CONFIG_CMD_MMC) += cmd_mmc.o
+ COBJS-$(CONFIG_MP) += cmd_mp.o
++COBJS-$(CONFIG_CMD_AT91_SPIMUX) += cmd_mux.o
+ COBJS-y += cmd_nand.o
+ COBJS-$(CONFIG_CMD_NET) += cmd_net.o
+ COBJS-$(CONFIG_CMD_ONENAND) += cmd_onenand.o
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-012-ethinit.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-012-ethinit.patch
new file mode 100644
index 000000000..c2f709c70
--- /dev/null
+++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-012-ethinit.patch
@@ -0,0 +1,77 @@
+diff -urN u-boot-2009.01-0rig//common/cmd_ethinit.c u-boot-2009.01/common/cmd_ethinit.c
+--- u-boot-2009.01-0rig//common/cmd_ethinit.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/common/cmd_ethinit.c	2009-01-04 00:28:39.000000000 +0100
+@@ -0,0 +1,62 @@
++/*
++ * (C) Copyright 2000
++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*
++ * Boot support
++ */
++#include <common.h>
++#include <command.h>
++#include <net.h>
++#ifdef CONFIG_CMD_ETHINIT
++extern int eth_init (bd_t * bd);
++
++static void	delay(void)
++{
++}
++/* 
++ * This command allows you to delay booting until you have a 
++ * valid Ethernet connection.
++ * Neccessary if you want to NFS mount a rootfs etc.
++ * When both this target and the NFS server 
++ * are powered on at the same time, then the NFS
++ * server can take a long time to boot.
++ */
++int do_ethinit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
++{
++	int	i;
++	DECLARE_GLOBAL_DATA_PTR;
++	while(eth_init (gd->bd) == 0) {
++		for(i = 0; i < 10000000; i ++) {
++			delay();
++		}
++	}
++	return 0;
++}
++
++U_BOOT_CMD(
++	ethinit,	1,	1,	do_ethinit,
++	"ethinit\t- Initialize Ethernet controller\n",
++	"\n"
++);
++
++#endif	/* CONFIG_CMD_ETHINIT */
+diff -urN u-boot-2009.01-0rig//common/Makefile u-boot-2009.01/common/Makefile
+--- u-boot-2009.01-0rig//common/Makefile	2009-01-04 00:22:06.000000000 +0100
++++ u-boot-2009.01/common/Makefile	2009-01-04 00:29:46.000000000 +0100
+@@ -83,6 +83,7 @@
+ COBJS-$(CONFIG_ENV_IS_IN_EEPROM) += cmd_eeprom.o
+ COBJS-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o
+ COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o
++COBJS-$(CONFIG_CMD_ETHINIT) += cmd_ethinit.o
+ COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o
+ COBJS-$(CONFIG_CMD_FACTORY) += cmd_factory.o
+ COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-013-configs.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-013-configs.patch
new file mode 100644
index 000000000..e65645b69
--- /dev/null
+++ b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-013-configs.patch
@@ -0,0 +1,130 @@
+diff -urN u-boot-2009.01-0rig//include/configs/at91cap9adk.h u-boot-2009.01/include/configs/at91cap9adk.h
+--- u-boot-2009.01-0rig//include/configs/at91cap9adk.h	2008-12-16 23:48:27.000000000 +0100
++++ u-boot-2009.01/include/configs/at91cap9adk.h	2009-01-04 00:43:58.000000000 +0100
+@@ -69,7 +69,9 @@
+ #define CONFIG_ATMEL_LCD		1
+ #define CONFIG_ATMEL_LCD_BGR555		1
+ #define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
+-
++#define CONFIG_CMD_FACTORY
++#define CONFIG_CMD_LED
++#define CONFIG_COLOURED_LED
+ #define CONFIG_BOOTDELAY	3
+ 
+ /*
+diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200df.h u-boot-2009.01/include/configs/at91rm9200df.h
+--- u-boot-2009.01-0rig//include/configs/at91rm9200df.h	2009-01-02 17:37:43.000000000 +0100
++++ u-boot-2009.01/include/configs/at91rm9200df.h	2009-01-04 00:43:33.000000000 +0100
+@@ -123,6 +123,9 @@
+ #define CONFIG_CMD_DHCP
+ #define CONFIG_CMD_MII
+ #define CONFIG_CMD_NAND
++#define CONFIG_CMD_FACTORY
++#define CONFIG_CMD_LED
++#define CONFIG_COLOURED_LED
+ #define CONFIG_CMD_AT91_SPIMUX
+ #define CONFIG_CMD_ETHINIT
+ 
+diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200dk_df.h u-boot-2009.01/include/configs/at91rm9200dk_df.h
+--- u-boot-2009.01-0rig//include/configs/at91rm9200dk_df.h	2009-01-02 10:03:11.000000000 +0100
++++ u-boot-2009.01/include/configs/at91rm9200dk_df.h	2009-01-04 00:42:52.000000000 +0100
+@@ -122,7 +122,11 @@
+ #define CONFIG_CMD_DHCP
+ #define CONFIG_CMD_MII
+ #define CONFIG_CMD_NAND
++#define CONFIG_CMD_FACTORY
++#define CONFIG_CMD_LED
++#define CONFIG_COLOURED_LED
+ #define CONFIG_CMD_AT91_SPIMUX
++#define CONFIG_CMD_ETHINIT
+ 
+ #define CONFIG_NAND_LEGACY
+ 
+diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200dk.h u-boot-2009.01/include/configs/at91rm9200dk.h
+--- u-boot-2009.01-0rig//include/configs/at91rm9200dk.h	2009-01-02 10:03:11.000000000 +0100
++++ u-boot-2009.01/include/configs/at91rm9200dk.h	2009-01-04 00:43:15.000000000 +0100
+@@ -120,7 +120,11 @@
+ #define CONFIG_CMD_DHCP
+ #define CONFIG_CMD_MII
+ #define CONFIG_CMD_NAND
++#define CONFIG_CMD_FACTORY
++#define CONFIG_CMD_LED
++#define CONFIG_COLOURED_LED
+ #define CONFIG_CMD_AT91_SPIMUX
++#define CONFIG_CMD_ETHINIT
+ 
+ #define CONFIG_NAND_LEGACY
+ 
+diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200ek.h u-boot-2009.01/include/configs/at91rm9200ek.h
+--- u-boot-2009.01-0rig//include/configs/at91rm9200ek.h	2009-01-02 17:37:43.000000000 +0100
++++ u-boot-2009.01/include/configs/at91rm9200ek.h	2009-01-04 00:42:35.000000000 +0100
+@@ -121,9 +121,11 @@
+ #define CONFIG_CMD_DHCP
+ #define CONFIG_CMD_MII
+ #define CONFIG_CMD_NAND
++#define CONFIG_CMD_FACTORY
++#define CONFIG_CMD_LED
++#define CONFIG_COLOURED_LED
+ #define CONFIG_CMD_AT91_SPIMUX
+ #define CONFIG_CMD_ETHINIT
+-
+ #define CONFIG_NAND_LEGACY
+ 
+ #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
+diff -urN u-boot-2009.01-0rig//include/configs/at91sam9260ek.h u-boot-2009.01/include/configs/at91sam9260ek.h
+--- u-boot-2009.01-0rig//include/configs/at91sam9260ek.h	2008-12-16 23:48:27.000000000 +0100
++++ u-boot-2009.01/include/configs/at91sam9260ek.h	2009-01-04 00:41:56.000000000 +0100
+@@ -74,10 +74,13 @@
+ #include <config_cmd_default.h>
+ #undef CONFIG_CMD_BDI
+ #undef CONFIG_CMD_IMI
+-#undef CONFIG_CMD_AUTOSCRIPT
++#define CONFIG_CMD_AUTOSCRIPT
+ #undef CONFIG_CMD_FPGA
+ #undef CONFIG_CMD_LOADS
+ #undef CONFIG_CMD_IMLS
++#define CONFIG_CMD_FACTORY
++#define CONFIG_CMD_LED
++#define CONFIG_COLOURED_LED
+ 
+ #define CONFIG_CMD_PING		1
+ #define CONFIG_CMD_DHCP		1
+diff -urN u-boot-2009.01-0rig//include/configs/at91sam9261ek.h u-boot-2009.01/include/configs/at91sam9261ek.h
+--- u-boot-2009.01-0rig//include/configs/at91sam9261ek.h	2008-12-16 23:48:27.000000000 +0100
++++ u-boot-2009.01/include/configs/at91sam9261ek.h	2009-01-04 00:44:11.000000000 +0100
+@@ -68,6 +68,9 @@
+ #define CONFIG_ATMEL_LCD		1
+ #define CONFIG_ATMEL_LCD_BGR555		1
+ #define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
++#define CONFIG_CMD_FACTORY
++#define CONFIG_CMD_LED
++#define CONFIG_COLOURED_LED
+ 
+ #define CONFIG_BOOTDELAY	3
+ 
+diff -urN u-boot-2009.01-0rig//include/configs/at91sam9263ek.h u-boot-2009.01/include/configs/at91sam9263ek.h
+--- u-boot-2009.01-0rig//include/configs/at91sam9263ek.h	2008-12-16 23:48:27.000000000 +0100
++++ u-boot-2009.01/include/configs/at91sam9263ek.h	2009-01-04 00:44:34.000000000 +0100
+@@ -69,6 +69,9 @@
+ #define CONFIG_ATMEL_LCD		1
+ #define CONFIG_ATMEL_LCD_BGR555		1
+ #define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
++#define CONFIG_CMD_FACTORY
++#define CONFIG_CMD_LED
++#define CONFIG_COLOURED_LED
+ 
+ #define CONFIG_BOOTDELAY	3
+ 
+diff -urN u-boot-2009.01-0rig//include/configs/at91sam9rlek.h u-boot-2009.01/include/configs/at91sam9rlek.h
+--- u-boot-2009.01-0rig//include/configs/at91sam9rlek.h	2008-12-16 23:48:27.000000000 +0100
++++ u-boot-2009.01/include/configs/at91sam9rlek.h	2009-01-04 00:44:54.000000000 +0100
+@@ -68,6 +68,9 @@
+ #define CONFIG_ATMEL_LCD		1
+ #define CONFIG_ATMEL_LCD_RGB565		1
+ #define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
++#define CONFIG_CMD_FACTORY
++#define CONFIG_CMD_LED
++#define CONFIG_COLOURED_LED
+ 
+ #define CONFIG_BOOTDELAY	3
+