board: remove support for at91sam9260pf

It was supposed to be the support for AT91SAM9260 using a parallel flash
(instead of the usual dataflash). But the provided U-Boot configuration
at91sam9260pf.h was not used anywhere, and it was unsufficient to add
correct support in U-Boot (some changes in U-Boot Makefile would also be
needed). Additionnally, this configuration has not been merged into U-Boot
upstream since 2007 (when it was added to Buildroot).

Therefore, let's get rid of this configuration. If some users are
interested, we can re-introduce it properly with their help.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

1 files changed, 0 insertions, 370 deletions

diff --git a/target/device/Atmel/at91sam9260pf/u-boot/at91sam9260pf.h b/target/device/Atmel/at91sam9260pf/u-boot/at91sam9260pf.h
deleted file mode 100644
index dcac08edb..000000000
--- a/target/device/Atmel/at91sam9260pf/u-boot/at91sam9260pf.h
+++ /dev/null
@@ -1,370 +0,0 @@
-/*
- * (C) Copyright 2006
- * M. Amine SAYA ATMEL Rousset, France.
- *
- * Rick Bronson <rick@efn.org>
- *
- * Configuration settings for the AT91SAM9260EK board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define	CONFIG_HOSTNAME			at91sam9260pf
-/*
- * If we are developing, we might want to start armboot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-
-/* ARM asynchronous clock */
-/* #define AT91C_MAIN_CLOCK		179712000 */	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
-#define AT91C_MASTER_CLOCK		99300000 	/* peripheral clock (AT91C_MASTER_CLOCK / 3) */
-/* #define AT91C_MASTER_CLOCK		45174500 */
-/* #define AT91C_MASTER_CLOCK		44928000 */	/* peripheral clock (AT91C_MASTER_CLOCK / 4) */
-
-#define AT91_SLOW_CLOCK			32768	/* slow clock */
-
-#define CFG_HZ				1000
-
-
-#define CONFIG_AT91			1
-
-#define CONFIG_ARM926EJS		1
-#define CONFIG_AT91SAM9260		1
-#define CONFIG_AT91SAM9260EK		1	/* on an AT91SAM9260EK Board	 */
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-#undef  CONFIG_USE_IRQ				/* we don't need IRQ/FIQ stuff */
-
-/* define this to include the functionality of boot.bin in u-boot */
-#undef	CONFIG_BOOTBINFUNC
-#undef	CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
-#define BOARD_LATE_INIT			1	/* Don't know what this means for now */
-/*
- * Size of malloc() pool
- */
-#define CFG_MALLOC_LEN			(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE		128	/* size in bytes reserved for initial data */
-
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_BOOTDELAY		3
-
-#undef CONFIG_ENV_OVERWRITE
-
-#define CONFIG_COMMANDS					\
-			((CONFIG_CMD_DFL		| \
-			  CFG_CMD_NET			| \
-			  CFG_CMD_PING			| \
-			  CFG_CMD_ENV			| \
-			  CFG_CMD_USB			| \
-			  CFG_CMD_FLASH			| \
-			  CFG_CMD_AUTOSCRIPT		| \
-			  CFG_CMD_DHCP			| \
-			  CFG_CMD_NAND			| \
-			  CFG_CMD_FAT )			& \
-			~(CFG_CMD_BDI			| \
-			  CFG_CMD_IMLS			| \
-			  CFG_CMD_IMI			| \
-			  CFG_CMD_FPGA			| \
-			  CFG_CMD_MISC			| \
-			  CFG_CMD_LOADS))
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-/* UART Configuration */
-#define CONFIG_BAUDRATE			115200
-#define CFG_BAUDRATE_TABLE		{115200 , 19200, 38400, 57600, 9600 }
-
-#undef CONFIG_HWFLOW			/* don't include RTS/CTS flow control support	*/
-#undef CONFIG_MODEM_SUPPORT		/* disable modem initialization stuff */
-
-/* Console Configuration */
-#define CFG_CONSOLE_IS_SERIAL
-#undef  CFG_CONSOLE_IS_LCD
-#define CONFIG_AUTO_COMPLETE
-#define CFG_LONGHELP
-
-/* define one of these to choose the DBGU, USART0  or USART1 as console */
-#define CONFIG_DBGU			1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-
-#define CFG_PROMPT			"U-Boot> "	/* Monitor Command Prompt */
-#define CFG_CBSIZE			256		/* Console I/O Buffer Size */
-#define CFG_MAXARGS			16		/* max number of command args */
-#define CFG_PBSIZE			(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-
-/* Ethernet Configuration */
-#define CONFIG_DRIVER_ETHER		1
-#define CONFIG_NET_RETRY_COUNT		5000
-#define CONFIG_TFTP_TIMEOUT		2500	/*250*/
-#define CONFIG_ETHINIT			1
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-
-#define CONFIG_AT91C_USE_RMII		1
-#define AT91C_PHY_ADDR			0
-#define AT91C_ETH_TIMEOUT		30000
-
-/* USB Configuration */
-#define CONFIG_USB_OHCI			1
-#define CONFIG_USB_STORAGE		1
-#define CONFIG_DOS_PARTITION		1
-#define LITTLEENDIAN			1
-
-/* LED Configuration */
-#define	PIO_ID				AT91C_ID_PIOA
-#define	PIO_LEDS			AT91C_BASE_PIOA
-#define	GREEN_LED			AT91C_PIO_PA6
-#define	GREEN_LED_ON			PIO_CODR
-#define	GREEN_LED_OFF			PIO_SODR
-#define	YELLOW_LED			AT91C_PIO_PA9
-#define	YELLOW_LED_ON			PIO_SODR
-#define	YELLOW_LED_OFF			PIO_CODR
-#define	RED_LED				0
-#define	RED_LED_ON			PIO_CODR
-#define	RED_LED_OFF			PIO_SODR
-#define	ALL_LEDS			(GREEN_LED | YELLOW_LED | RED_LED)
-#define	TIME_SLICE			500000
-
-/* Memory Configuration */
-#define CFG_ENV_OVERWRITE		1
-#define CONFIG_HAS_DATAFLASH		1
-#undef  CFG_NO_FLASH			1
-
-#define CFG_ENV_IS_IN_FLASH		1
-#undef  CFG_ENV_IS_IN_DATAFLASH
-#undef  CFG_ENV_IS_IN_NAND
-
-#define	UBOOT_NPCS0
-#undef  UBOOT_NPCS1
-#undef  UBOOT_NPCS3
-
-#define	SPI_MODE			3
-
-/* SDRAMC */
-#define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM			0x20000000
-#define PHYS_SDRAM_SIZE			0x4000000  /* 64 megs */
-
-#define CFG_MEMTEST_START		PHYS_SDRAM
-#define CFG_MEMTEST_END			CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
-
-/* DataFlash */
-#define CFG_SPI_WRITE_TOUT		(50*CFG_HZ)
-
-/* AC Characteristics */
-/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
-#define DATAFLASH_TCSS			(0x1a << 16)
-#define DATAFLASH_TCHS			(0x1 << 24)
-
-#define CFG_MAX_DATAFLASH_BANKS		2
-#define CFG_MAX_DATAFLASH_PAGES		16384
-#define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
-#define CFG_DATAFLASH_LOGIC_ADDR_CS1	0xD0000000	/* Logical adress for CS1 */
-#undef  CFG_DATAFLASH_LOGIC_ADDR_CS3	/* 0xD0000000	*/ /* Logical adress for CS1 */
-
-#define CFG_SUPPORT_BLOCK_ERASE		1
-#define CONFIG_NEW_PARTITION		1
-#define	NB_DATAFLASH_AREA		6
-
-/* Parallel Flash Configuration */
-#define PHYS_FLASH_1			0x10000000
-#define PHYS_FLASH_SIZE			0x800000  	/* 8 megs main flash */
-#define CFG_FLASH_BASE			PHYS_FLASH_1
-#define CFG_MAX_FLASH_BANKS		1
-#define CFG_MAX_FLASH_SECT		256
-#define CFG_FLASH_ERASE_TOUT		(2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT		(2*CFG_HZ) /* Timeout for Flash Write */
-
-/* NAND Flash Configuration */
-#define NAND_MAX_CHIPS			1	/* Max number of NAND devices	*/
-#define CFG_MAX_NAND_DEVICE		1	/* Max number of NAND devices	*/
-#define SECTORSIZE			512
-#define CFG_NAND_BASE			0x40000000
-#define CONFIG_NEW_NAND_CODE
-
-#define ADDR_COLUMN			1
-#define ADDR_PAGE			2
-#define ADDR_COLUMN_PAGE		3
-
-#define NAND_ChipID_UNKNOWN		0x00
-#define NAND_MAX_FLOORS			1
-#undef  CFG_NAND_WP
-
-/*#define AT91_SMART_MEDIA_ALE		(1 << 21)*/	/* our ALE is AD21 */
-/*#define AT91_SMART_MEDIA_CLE		(1 << 22)*/	/* our CLE is AD22 */
-
-/* SMC Chip Select 3 Timings for NandFlash K9F1216U0A (samsung)
- * for MASTER_CLOCK = 48000000. They were generated according to 
- * K9F1216U0A timings and for MASTER_CLOCK = 48000000.
- * Please refer to SMC section in AT91SAM9261 datasheet to learn how 
- * to generate these values.
- */
- 
-/*
-#define AT91C_SM_NWE_SETUP		(0 << 0)		
-#define AT91C_SM_NCS_WR_SETUP		(0 << 8)		
-#define AT91C_SM_NRD_SETUP		(0 << 16)		
-#define AT91C_SM_NCS_RD_SETUP		(0 << 24)		
-  
-#define AT91C_SM_NWE_PULSE 		(2 << 0)		
-#define AT91C_SM_NCS_WR_PULSE		(3 << 8)		
-#define AT91C_SM_NRD_PULSE		(2 << 16)		
-#define AT91C_SM_NCS_RD_PULSE		(4 << 24)		
-  
-#define AT91C_SM_NWE_CYCLE 		(3 << 0)		
-#define AT91C_SM_NRD_CYCLE		(5 << 16)		
-  
-#define AT91C_SM_TDF	        	(1 << 16)		
-*/
-
-/* SMC Chip Select 3 Timings for NandFlash K9F1216U0A (samsung)
- * for MASTER_CLOCK = 100000000. They were generated according to 
- * K9F1216U0A timings and for MASTER_CLOCK = 100000000.
- * Please refer to SMC section in AT91SAM9261 datasheet to learn how 
- * to generate these values.
- */
-
-/* These timings are specific to K9F1216U0A (samsung) */
-/*
-#define AT91C_SM_NWE_SETUP		(0 << 0)		
-#define AT91C_SM_NCS_WR_SETUP		(0 << 8)		
-#define AT91C_SM_NRD_SETUP		(0 << 16)		
-#define AT91C_SM_NCS_RD_SETUP		(0 << 24)		
-  
-#define AT91C_SM_NWE_PULSE 		(3 << 0)		
-#define AT91C_SM_NCS_WR_PULSE		(3 << 8)		
-#define AT91C_SM_NRD_PULSE		(4 << 16)		
-#define AT91C_SM_NCS_RD_PULSE		(4 << 24)		
-  
-#define AT91C_SM_NWE_CYCLE 		(5 << 0)		
-#define AT91C_SM_NRD_CYCLE		(5 << 16)		
-*/
-
-/* These timings are specific to MT29F2G16AAB 256Mb (Micron) 
- * at MCK = 100 MHZ
- */
-
-/* New NAND commands */
-#define AT91C_SM_NWE_SETUP		(0 << 0)
-#define AT91C_SM_NCS_WR_SETUP		(0 << 8)
-#define AT91C_SM_NRD_SETUP		(0 << 16)
-#define AT91C_SM_NCS_RD_SETUP		(0 << 24)
-  
-#define AT91C_SM_NWE_PULSE		(4 << 0)
-#define AT91C_SM_NCS_WR_PULSE		(6 << 8)
-#define AT91C_SM_NRD_PULSE		(3 << 16)
-#define AT91C_SM_NCS_RD_PULSE		(5 << 24)
-  
-#define AT91C_SM_NWE_CYCLE		(6 << 0)
-#define AT91C_SM_NRD_CYCLE		(5 << 16)
-
-#define AT91C_SM_TDF			(1 << 16)		
-
-/*#define CONFIG_MTD_DEBUG		1
-#define CONFIG_MTD_DEBUG_VERBOSE	MTD_DEBUG_LEVEL3
-*/
-
-/* Environment */
-#ifdef CFG_ENV_IS_IN_NAND
-#define CFG_ENV_OFFSET			0x60000		/* environment starts here  */
-#define CFG_ENV_SIZE			0x20000 	/* 1 sector = 128kB */
-#endif
-
-#ifdef CFG_ENV_IS_IN_DATAFLASH
-#	if	defined(UBOOT_NPCS0)
-#		define UBOOT_NPCS	CFG_DATAFLASH_LOGIC_ADDR_CS0
-#	elif	defined(UBOOT_NPCS1)
-#		define UBOOT_NPCS	CFG_DATAFLASH_LOGIC_ADDR_CS1
-#	elif	defined(UBOOT_NPCS3)
-#		define UBOOT_NPCS	CFG_DATAFLASH_LOGIC_ADDR_CS3
-#	endif
-
-#	define CFG_ENV_OFFSET		0x4200
-#	define CFG_ENV_ADDR		(UBOOT_NPCS + CFG_ENV_OFFSET)
-#	define CFG_ENV_SIZE		0x2000  /* 0x8000 */
-#endif
-
-#ifdef CFG_ENV_IS_IN_FLASH
-#	ifdef CONFIG_BOOTBINFUNC
-#		define CFG_ENV_ADDR	(PHYS_FLASH_1 + 0x60000)  /* after u-boot.bin */
-#		define CFG_ENV_SIZE	0x10000 /* sectors are 64K here */
-#	else
-#		define CFG_ENV_ADDR	(PHYS_FLASH_1 + 0x6000)  /* between boot.bin and u-boot.bin.gz */
-#		define CFG_ENV_SIZE	0x2000  /* 0x8000 */
-#	endif
-#endif
-
-#if	CFG_ENV_IS_IN_DATAFLASH | CFG_ENV_IS_IN_FLASH | CFG_ENV_IS_IN_NAND
-#else
-#error	"No Environment Defined"
-#endif
-
-#define KERNEL_1_5_MB
-#define CFG_LOAD_ADDR			0x23f00000  /* default load address */
-
-#ifdef CONFIG_BOOTBINFUNC
-#	define CFG_BOOT_SIZE		0x00 /* 0 KBytes */
-#	define CFG_U_BOOT_BASE		PHYS_FLASH_1
-#	define CFG_U_BOOT_SIZE		0x60000 /* 384 KBytes */
-#else
-#	define CFG_BOOT_SIZE		0x6000 /* 24 KBytes */
-#	define CFG_U_BOOT_BASE		(PHYS_FLASH_1 + 0x8000)	/* After 32 kB */
-#	define CFG_U_BOOT_SIZE		0x38000 /* 224 KBytes */
-#endif
-
-#ifndef __ASSEMBLY__
-/*-----------------------------------------------------------------------
- * Board specific extension for bd_info
- *
- * This structure is embedded in the global bd_info (bd_t) structure
- * and can be used by the board specific code (eg board/...)
- */
-
-struct bd_info_ext {
-	/* helper variable for board environment handling
-	 *
-	 * env_crc_valid == 0    =>   uninitialised
-	 * env_crc_valid  > 0    =>   environment crc in flash is valid
-	 * env_crc_valid  < 0    =>   environment crc in flash is invalid
-	 */
-	int env_crc_valid;
-};
-#endif
-
-
-#define CONFIG_STACKSIZE		(32*1024)	/* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif