Remove duplicate AVR32 patches, and add support for ARCH and conditional AVR32 patches

1 files changed, 0 insertions, 255 deletions

diff --git a/target/device/Atmel/atngw100-base/kernel-patches/linux-2.6.24-600-avr32-mmc.patch b/target/device/Atmel/atngw100-base/kernel-patches/linux-2.6.24-600-avr32-mmc.patch
deleted file mode 100644
index a7654b5c6..000000000
--- a/target/device/Atmel/atngw100-base/kernel-patches/linux-2.6.24-600-avr32-mmc.patch
+++ /dev/null
@@ -1,255 +0,0 @@
-diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
-index eeac479..7913cd8 100644
---- a/drivers/mmc/host/atmel-mci.c
-+++ b/drivers/mmc/host/atmel-mci.c
-@@ -39,7 +39,6 @@ enum {
- 	EVENT_STOP_COMPLETE,
- 	EVENT_DMA_COMPLETE,
- 	EVENT_DMA_ERROR,
--	EVENT_CARD_DETECT,
- };
- 
- struct atmel_mci_dma {
-@@ -70,6 +69,9 @@ struct atmel_mci {
- 	int			detect_pin;
- 	int			wp_pin;
- 
-+	/* For detect pin debouncing */
-+	struct timer_list	detect_timer;
-+
- 	unsigned long		bus_hz;
- 	unsigned long		mapbase;
- 	struct clk		*mck;
-@@ -108,8 +110,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
- 	test_bit(EVENT_DMA_COMPLETE, &host->completed_events)
- #define mci_dma_error_is_complete(host)			\
- 	test_bit(EVENT_DMA_ERROR, &host->completed_events)
--#define mci_card_detect_is_complete(host)			\
--	test_bit(EVENT_CARD_DETECT, &host->completed_events)
- 
- /* Test and clear bit macros for pending events */
- #define mci_clear_cmd_is_pending(host)			\
-@@ -124,8 +124,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
- 	test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
- #define mci_clear_dma_error_is_pending(host)		\
- 	test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
--#define mci_clear_card_detect_is_pending(host)		\
--	test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
- 
- /* Test and set bit macros for completed events */
- #define mci_set_cmd_is_completed(host)			\
-@@ -140,8 +138,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
- 	test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
- #define mci_set_dma_error_is_completed(host)		\
- 	test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
--#define mci_set_card_detect_is_completed(host)		\
--	test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
- 
- /* Set bit macros for completed events */
- #define mci_set_cmd_complete(host)			\
-@@ -158,8 +154,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
- 	set_bit(EVENT_DMA_COMPLETE, &host->completed_events)
- #define mci_set_dma_error_complete(host)		\
- 	set_bit(EVENT_DMA_ERROR, &host->completed_events)
--#define mci_set_card_detect_complete(host)		\
--	set_bit(EVENT_CARD_DETECT, &host->completed_events)
- 
- /* Set bit macros for pending events */
- #define mci_set_cmd_pending(host)			\
-@@ -174,8 +168,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
- 	set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
- #define mci_set_dma_error_pending(host)			\
- 	set_bit(EVENT_DMA_ERROR, &host->pending_events)
--#define mci_set_card_detect_pending(host)		\
--	set_bit(EVENT_CARD_DETECT, &host->pending_events)
- 
- /* Clear bit macros for pending events */
- #define mci_clear_cmd_pending(host)			\
-@@ -190,8 +182,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
- 	clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
- #define mci_clear_dma_error_pending(host)		\
- 	clear_bit(EVENT_DMA_ERROR, &host->pending_events)
--#define mci_clear_card_detect_pending(host)		\
--	clear_bit(EVENT_CARD_DETECT, &host->pending_events)
- 
- 
- #ifdef CONFIG_DEBUG_FS
-@@ -560,6 +550,21 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
- 				mci_readl(host, IMR));
- 
- 	WARN_ON(host->mrq != NULL);
-+
-+	/*
-+	 * We may "know" the card is gone even though there's still an
-+	 * electrical connection. If so, we really need to communicate
-+	 * this to the MMC core since there won't be any more
-+	 * interrupts as the card is completely removed. Otherwise,
-+	 * the MMC core might believe the card is still there even
-+	 * though the card was just removed very slowly.
-+	 */
-+	if (!host->present) {
-+		mrq->cmd->error = -ENOMEDIUM;
-+		mmc_request_done(mmc, mrq);
-+		return;
-+	}
-+
- 	host->mrq = mrq;
- 	host->pending_events = 0;
- 	host->completed_events = 0;
-@@ -729,6 +734,61 @@ static void atmci_command_complete(struct atmel_mci *host,
- 	}
- }
- 
-+static void atmci_detect_change(unsigned long data)
-+{
-+	struct atmel_mci *host = (struct atmel_mci *)data;
-+	struct mmc_request *mrq = host->mrq;
-+	int present;
-+
-+	/*
-+	 * atmci_remove() sets detect_pin to -1 before freeing the
-+	 * interrupt. We must not re-enable the interrupt if it has
-+	 * been freed.
-+	 */
-+	smp_rmb();
-+	if (host->detect_pin < 0)
-+		return;
-+
-+	enable_irq(gpio_to_irq(host->detect_pin));
-+	present = !gpio_get_value(host->detect_pin);
-+
-+	dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n",
-+			present, host->present);
-+
-+	if (present != host->present) {
-+		dev_dbg(&host->mmc->class_dev, "card %s\n",
-+			present ? "inserted" : "removed");
-+		host->present = present;
-+
-+		/* Reset controller if card is gone */
-+		if (!present) {
-+			mci_writel(host, CR, MCI_BIT(SWRST));
-+			mci_writel(host, IDR, ~0UL);
-+			mci_writel(host, CR, MCI_BIT(MCIEN));
-+		}
-+
-+		/* Clean up queue if present */
-+		if (mrq) {
-+			if (!mci_cmd_is_complete(host))
-+				mrq->cmd->error = -ENOMEDIUM;
-+			if (mrq->data && !mci_data_is_complete(host)
-+			    && !mci_data_error_is_complete(host)) {
-+				dma_stop_request(host->dma.req.req.dmac,
-+						host->dma.req.req.channel);
-+				host->data->error = -ENOMEDIUM;
-+				atmci_data_complete(host, host->data);
-+			}
-+			if (mrq->stop && !mci_stop_is_complete(host))
-+				mrq->stop->error = -ENOMEDIUM;
-+
-+			host->cmd = NULL;
-+			atmci_request_end(host->mmc, mrq);
-+		}
-+
-+		mmc_detect_change(host->mmc, 0);
-+	}
-+}
-+
- static void atmci_tasklet_func(unsigned long priv)
- {
- 	struct mmc_host *mmc = (struct mmc_host *)priv;
-@@ -806,33 +866,6 @@ static void atmci_tasklet_func(unsigned long priv)
- 		data->bytes_xfered = data->blocks * data->blksz;
- 		atmci_data_complete(host, data);
- 	}
--	if (mci_clear_card_detect_is_pending(host)) {
--		/* Reset controller if card is gone */
--		if (!host->present) {
--			mci_writel(host, CR, MCI_BIT(SWRST));
--			mci_writel(host, IDR, ~0UL);
--			mci_writel(host, CR, MCI_BIT(MCIEN));
--		}
--
--		/* Clean up queue if present */
--		if (mrq) {
--			if (!mci_cmd_is_complete(host))
--				mrq->cmd->error = -ETIMEDOUT;
--			if (mrq->data && !mci_data_is_complete(host)
--			    && !mci_data_error_is_complete(host)) {
--				dma_stop_request(host->dma.req.req.dmac,
--						host->dma.req.req.channel);
--				host->data->error = -ETIMEDOUT;
--				atmci_data_complete(host, data);
--			}
--			if (mrq->stop && !mci_stop_is_complete(host))
--				mrq->stop->error = -ETIMEDOUT;
--
--			host->cmd = NULL;
--			atmci_request_end(mmc, mrq);
--		}
--		mmc_detect_change(host->mmc, msecs_to_jiffies(100));
--	}
- }
- 
- static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
-@@ -957,20 +990,19 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id)
- 	return IRQ_HANDLED;
- }
- 
--static irqreturn_t atmci_detect_change(int irq, void *dev_id)
-+static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
- {
- 	struct mmc_host *mmc = dev_id;
- 	struct atmel_mci *host = mmc_priv(mmc);
- 
--	int present = !gpio_get_value(irq_to_gpio(irq));
-+	/*
-+	 * Disable interrupts until the pin has stabilized and check
-+	 * the state then. Use mod_timer() since we may be in the
-+	 * middle of the timer routine when this interrupt triggers.
-+	 */
-+	disable_irq_nosync(irq);
-+	mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20));
- 
--	if (present != host->present) {
--		dev_dbg(&mmc->class_dev, "card %s\n",
--			present ? "inserted" : "removed");
--		host->present = present;
--		mci_set_card_detect_pending(host);
--		tasklet_schedule(&host->tasklet);
--	}
- 	return IRQ_HANDLED;
- }
- 
-@@ -1079,8 +1111,11 @@ static int __devinit atmci_probe(struct platform_device *pdev)
- 	mmc_add_host(mmc);
- 
- 	if (host->detect_pin >= 0) {
-+		setup_timer(&host->detect_timer, atmci_detect_change,
-+				(unsigned long)host);
-+
- 		ret = request_irq(gpio_to_irq(host->detect_pin),
--				  atmci_detect_change,
-+				  atmci_detect_interrupt,
- 				  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- 				  DRIVER_NAME, mmc);
- 		if (ret) {
-@@ -1125,9 +1160,16 @@ static int __devexit atmci_remove(struct platform_device *pdev)
- 		atmci_cleanup_debugfs(host);
- 
- 		if (host->detect_pin >= 0) {
--			free_irq(gpio_to_irq(host->detect_pin), host->mmc);
-+			int pin = host->detect_pin;
-+
-+			/* Make sure our timer doesn't enable the interrupt */
-+			host->detect_pin = -1;
-+			smp_wmb();
-+
-+			free_irq(gpio_to_irq(pin), host->mmc);
-+			del_timer_sync(&host->detect_timer);
- 			cancel_delayed_work(&host->mmc->detect);
--			gpio_free(host->detect_pin);
-+			gpio_free(pin);
- 		}
- 
- 		mmc_remove_host(host->mmc);