updates and additions for avr32 arch

35 files changed, 44777 insertions, 0 deletions

diff --git a/target/device/Atmel/atngw100-base/Makefile.in b/target/device/Atmel/atngw100-base/Makefile.in
new file mode 100644
index 000000000..b74e4984b
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/Makefile.in
@@ -0,0 +1,6 @@
+ifeq ($(strip $(BR2_TARGET_AVR32_ATNGW100_BASE)),y)
+ATNGW100_BASE_PATH=target/device/Atmel/atngw100-base
+
+TARGET_SKELETON=$(ATNGW100_BASE_PATH)/target_skeleton
+TARGET_DEVICE_TABLE=$(ATNGW100_BASE_PATH)/device_table.txt
+endif
diff --git a/target/device/Atmel/atngw100-base/atngw100-base-linux-2.6.23.config b/target/device/Atmel/atngw100-base/atngw100-base-linux-2.6.23.config
new file mode 100644
index 000000000..0cbe476d7
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/atngw100-base-linux-2.6.23.config
@@ -0,0 +1,858 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+# CONFIG_TASK_XACCT is not set
+# CONFIG_USER_NS is not set
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type and features
+#
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+# CONFIG_CPU_AT32AP7001 is not set
+# CONFIG_CPU_AT32AP7002 is not set
+# CONFIG_BOARD_ATSTK1000 is not set
+CONFIG_BOARD_ATNGW100=y
+# CONFIG_BOARD_ATNGW100_I2C_GPIO is not set
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_GPIO_DEV=y
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_DW_DMAC=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_CMDLINE=""
+
+#
+# Power managment options
+#
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_XFRM_TUNNEL=y
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=y
+CONFIG_INET6_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x80000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+CONFIG_USB_G_SERIAL=y
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_ATMELMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/target/device/Atmel/atngw100-base/atngw100-base-linux-2.6.24.config b/target/device/Atmel/atngw100-base/atngw100-base-linux-2.6.24.config
new file mode 100644
index 000000000..06046074d
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/atngw100-base-linux-2.6.24.config
@@ -0,0 +1,1147 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc7
+# Wed Jan  9 23:20:41 2008
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type and features
+#
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+# CONFIG_BOARD_ATSTK1000 is not set
+CONFIG_BOARD_ATNGW100=y
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_OWNERSHIP_TRACE is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_XFRM_TUNNEL=y
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=y
+CONFIG_INET6_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x80000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_SPI=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=y
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/target/device/Atmel/atngw100-base/busybox-1.7.2.config b/target/device/Atmel/atngw100-base/busybox-1.7.2.config
new file mode 100644
index 000000000..585827282
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/busybox-1.7.2.config
@@ -0,0 +1,741 @@
+#
+# Automatically generated make config: don't edit
+# Busybox version: 1.7.2
+# Wed Oct 31 15:54:13 2007
+#
+CONFIG_HAVE_DOT_CONFIG=y
+
+#
+# Busybox Settings
+#
+
+#
+# General Configuration
+#
+# CONFIG_NITPICK is not set
+# CONFIG_DESKTOP is not set
+# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
+# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_SHOW_USAGE=y
+CONFIG_FEATURE_VERBOSE_USAGE=y
+# CONFIG_FEATURE_COMPRESS_USAGE is not set
+# CONFIG_FEATURE_INSTALLER is not set
+# CONFIG_LOCALE_SUPPORT is not set
+CONFIG_GETOPT_LONG=y
+CONFIG_FEATURE_DEVPTS=y
+# CONFIG_FEATURE_CLEAN_UP is not set
+# CONFIG_FEATURE_PIDFILE is not set
+CONFIG_FEATURE_SUID=y
+# CONFIG_FEATURE_SUID_CONFIG is not set
+# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set
+# CONFIG_SELINUX is not set
+# CONFIG_FEATURE_PREFER_APPLETS is not set
+CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
+CONFIG_FEATURE_SYSLOG=y
+CONFIG_FEATURE_HAVE_RPC=y
+
+#
+# Build Options
+#
+# CONFIG_STATIC is not set
+# CONFIG_BUILD_LIBBUSYBOX is not set
+# CONFIG_FEATURE_FULL_LIBBUSYBOX is not set
+# CONFIG_FEATURE_SHARED_BUSYBOX is not set
+CONFIG_LFS=y
+CONFIG_BUILD_AT_ONCE=y
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_WERROR is not set
+CONFIG_NO_DEBUG_LIB=y
+# CONFIG_DMALLOC is not set
+# CONFIG_EFENCE is not set
+CONFIG_INCLUDE_SUSv2=y
+
+#
+# Installation Options
+#
+# CONFIG_INSTALL_NO_USR is not set
+CONFIG_INSTALL_APPLET_SYMLINKS=y
+# CONFIG_INSTALL_APPLET_HARDLINKS is not set
+# CONFIG_INSTALL_APPLET_DONT is not set
+CONFIG_PREFIX="/home/avr23/buildroot/project_build_avr32_nofpu/atngw100-base/root"
+
+#
+# Busybox Library Tuning
+#
+CONFIG_PASSWORD_MINLEN=6
+CONFIG_MD5_SIZE_VS_SPEED=2
+CONFIG_FEATURE_FAST_TOP=y
+# CONFIG_FEATURE_ETC_NETWORKS is not set
+CONFIG_FEATURE_EDITING=y
+CONFIG_FEATURE_EDITING_MAX_LEN=1024
+CONFIG_FEATURE_EDITING_FANCY_KEYS=y
+# CONFIG_FEATURE_EDITING_VI is not set
+CONFIG_FEATURE_EDITING_HISTORY=15
+CONFIG_FEATURE_EDITING_SAVEHISTORY=y
+CONFIG_FEATURE_TAB_COMPLETION=y
+# CONFIG_FEATURE_USERNAME_COMPLETION is not set
+# CONFIG_FEATURE_EDITING_FANCY_PROMPT is not set
+CONFIG_MONOTONIC_SYSCALL=y
+CONFIG_IOCTL_HEX2STR_ERROR=y
+
+#
+# Applets
+#
+
+#
+# Archival Utilities
+#
+# CONFIG_AR is not set
+# CONFIG_FEATURE_AR_LONG_FILENAMES is not set
+# CONFIG_BUNZIP2 is not set
+# CONFIG_CPIO is not set
+# CONFIG_DPKG is not set
+# CONFIG_DPKG_DEB is not set
+# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
+# CONFIG_GUNZIP is not set
+# CONFIG_FEATURE_GUNZIP_UNCOMPRESS is not set
+# CONFIG_GZIP is not set
+# CONFIG_RPM2CPIO is not set
+# CONFIG_RPM is not set
+# CONFIG_FEATURE_RPM_BZ2 is not set
+# CONFIG_TAR is not set
+# CONFIG_FEATURE_TAR_CREATE is not set
+# CONFIG_FEATURE_TAR_BZIP2 is not set
+# CONFIG_FEATURE_TAR_LZMA is not set
+# CONFIG_FEATURE_TAR_FROM is not set
+# CONFIG_FEATURE_TAR_GZIP is not set
+# CONFIG_FEATURE_TAR_COMPRESS is not set
+# CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY is not set
+# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set
+# CONFIG_FEATURE_TAR_GNU_EXTENSIONS is not set
+# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set
+# CONFIG_UNCOMPRESS is not set
+# CONFIG_UNLZMA is not set
+# CONFIG_FEATURE_LZMA_FAST is not set
+# CONFIG_UNZIP is not set
+# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
+# CONFIG_FEATURE_DEB_TAR_GZ is not set
+# CONFIG_FEATURE_DEB_TAR_BZ2 is not set
+# CONFIG_FEATURE_DEB_TAR_LZMA is not set
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+CONFIG_CAL=y
+CONFIG_CAT=y
+# CONFIG_CATV is not set
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+CONFIG_CHROOT=y
+# CONFIG_CKSUM is not set
+# CONFIG_COMM is not set
+CONFIG_CP=y
+CONFIG_CUT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+CONFIG_DD=y
+# CONFIG_FEATURE_DD_SIGNAL_HANDLING is not set
+# CONFIG_FEATURE_DD_IBS_OBS is not set
+CONFIG_DF=y
+CONFIG_DIRNAME=y
+CONFIG_DOS2UNIX=y
+CONFIG_UNIX2DOS=y
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+# CONFIG_FEATURE_ENV_LONG_OPTIONS is not set
+# CONFIG_EXPAND is not set
+# CONFIG_FEATURE_EXPAND_LONG_OPTIONS is not set
+CONFIG_EXPR=y
+CONFIG_EXPR_MATH_SUPPORT_64=y
+CONFIG_FALSE=y
+# CONFIG_FOLD is not set
+CONFIG_HEAD=y
+# CONFIG_FEATURE_FANCY_HEAD is not set
+CONFIG_HOSTID=y
+CONFIG_ID=y
+CONFIG_INSTALL=y
+# CONFIG_FEATURE_INSTALL_LONG_OPTIONS is not set
+# CONFIG_LENGTH is not set
+CONFIG_LN=y
+CONFIG_LOGNAME=y
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=y
+CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
+CONFIG_MD5SUM=y
+CONFIG_MKDIR=y
+# CONFIG_FEATURE_MKDIR_LONG_OPTIONS is not set
+CONFIG_MKFIFO=y
+CONFIG_MKNOD=y
+CONFIG_MV=y
+# CONFIG_FEATURE_MV_LONG_OPTIONS is not set
+CONFIG_NICE=y
+# CONFIG_NOHUP is not set
+# CONFIG_OD is not set
+# CONFIG_PRINTENV is not set
+# CONFIG_PRINTF is not set
+CONFIG_PWD=y
+CONFIG_READLINK=y
+CONFIG_FEATURE_READLINK_FOLLOW=y
+# CONFIG_REALPATH is not set
+CONFIG_RM=y
+CONFIG_RMDIR=y
+CONFIG_SEQ=y
+CONFIG_SHA1SUM=y
+CONFIG_SLEEP=y
+# CONFIG_FEATURE_FANCY_SLEEP is not set
+CONFIG_SORT=y
+CONFIG_FEATURE_SORT_BIG=y
+# CONFIG_SPLIT is not set
+# CONFIG_FEATURE_SPLIT_FANCY is not set
+# CONFIG_STAT is not set
+# CONFIG_FEATURE_STAT_FORMAT is not set
+CONFIG_STTY=y
+# CONFIG_SUM is not set
+CONFIG_SYNC=y
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=y
+CONFIG_TEE=y
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+CONFIG_TEST=y
+CONFIG_FEATURE_TEST_64=y
+CONFIG_TOUCH=y
+# CONFIG_TR is not set
+# CONFIG_FEATURE_TR_CLASSES is not set
+# CONFIG_FEATURE_TR_EQUIV is not set
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+# CONFIG_UNEXPAND is not set
+# CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS is not set
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+CONFIG_UUDECODE=y
+CONFIG_UUENCODE=y
+CONFIG_WC=y
+# CONFIG_FEATURE_WC_LARGE is not set
+CONFIG_WHO=y
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls, more and telnet
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Common options for md5sum, sha1sum
+#
+CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=y
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+# CONFIG_DUMPKMAP is not set
+# CONFIG_LOADFONT is not set
+# CONFIG_LOADKMAP is not set
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+CONFIG_RESIZE=y
+CONFIG_FEATURE_RESIZE_PRINT=y
+CONFIG_SETCONSOLE=y
+# CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS is not set
+# CONFIG_SETKEYCODES is not set
+# CONFIG_SETLOGCONS is not set
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+# CONFIG_PIPE_PROGRESS is not set
+CONFIG_RUN_PARTS=y
+CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
+# CONFIG_FEATURE_RUN_PARTS_FANCY is not set
+CONFIG_START_STOP_DAEMON=y
+CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
+CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
+CONFIG_WHICH=y
+
+#
+# Editors
+#
+# CONFIG_AWK is not set
+# CONFIG_FEATURE_AWK_MATH is not set
+# CONFIG_CMP is not set
+# CONFIG_DIFF is not set
+# CONFIG_FEATURE_DIFF_BINARY is not set
+# CONFIG_FEATURE_DIFF_DIR is not set
+# CONFIG_FEATURE_DIFF_MINIMAL is not set
+# CONFIG_ED is not set
+# CONFIG_PATCH is not set
+# CONFIG_SED is not set
+CONFIG_VI=y
+CONFIG_FEATURE_VI_MAX_LEN=1024
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+CONFIG_FEATURE_ALLOW_EXEC=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_PRINT0=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_MMIN=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+CONFIG_FEATURE_FIND_MAXDEPTH=y
+CONFIG_FEATURE_FIND_NEWER=y
+CONFIG_FEATURE_FIND_INUM=y
+CONFIG_FEATURE_FIND_EXEC=y
+CONFIG_FEATURE_FIND_USER=y
+CONFIG_FEATURE_FIND_GROUP=y
+CONFIG_FEATURE_FIND_NOT=y
+CONFIG_FEATURE_FIND_DEPTH=y
+CONFIG_FEATURE_FIND_PAREN=y
+CONFIG_FEATURE_FIND_SIZE=y
+CONFIG_FEATURE_FIND_PRUNE=y
+CONFIG_FEATURE_FIND_DELETE=y
+CONFIG_FEATURE_FIND_PATH=y
+CONFIG_FEATURE_FIND_REGEX=y
+# CONFIG_FEATURE_FIND_CONTEXT is not set
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+# CONFIG_XARGS is not set
+# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set
+# CONFIG_FEATURE_XARGS_SUPPORT_QUOTES is not set
+# CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT is not set
+# CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM is not set
+
+#
+# Init Utilities
+#
+CONFIG_INIT=y
+# CONFIG_DEBUG_INIT is not set
+CONFIG_FEATURE_USE_INITTAB=y
+CONFIG_FEATURE_INIT_SCTTY=y
+CONFIG_FEATURE_INIT_SYSLOG=y
+CONFIG_FEATURE_EXTRA_QUIET=y
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+CONFIG_FEATURE_INITRD=y
+CONFIG_HALT=y
+# CONFIG_MESG is not set
+
+#
+# Login/Password Management Utilities
+#
+CONFIG_FEATURE_SHADOWPASSWDS=y
+# CONFIG_USE_BB_SHADOW is not set
+# CONFIG_USE_BB_PWD_GRP is not set
+CONFIG_ADDGROUP=y
+CONFIG_FEATURE_ADDUSER_TO_GROUP=y
+CONFIG_DELGROUP=y
+CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
+CONFIG_ADDUSER=y
+CONFIG_DELUSER=y
+CONFIG_GETTY=y
+CONFIG_FEATURE_UTMP=y
+# CONFIG_FEATURE_WTMP is not set
+CONFIG_LOGIN=y
+# CONFIG_PAM is not set
+CONFIG_LOGIN_SCRIPTS=y
+CONFIG_FEATURE_NOLOGIN=y
+CONFIG_FEATURE_SECURETTY=y
+CONFIG_PASSWD=y
+CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
+# CONFIG_CRYPTPW is not set
+# CONFIG_CHPASSWD is not set
+CONFIG_SU=y
+CONFIG_FEATURE_SU_SYSLOG=y
+CONFIG_FEATURE_SU_CHECKS_SHELLS=y
+CONFIG_SULOGIN=y
+CONFIG_VLOCK=y
+
+#
+# Linux Ext2 FS Progs
+#
+# CONFIG_CHATTR is not set
+# CONFIG_FSCK is not set
+# CONFIG_LSATTR is not set
+
+#
+# Linux Module Utilities
+#
+# CONFIG_INSMOD is not set
+# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
+# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
+# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set
+# CONFIG_RMMOD is not set
+# CONFIG_LSMOD is not set
+# CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT is not set
+# CONFIG_MODPROBE is not set
+# CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS is not set
+# CONFIG_FEATURE_MODPROBE_FANCY_ALIAS is not set
+# CONFIG_FEATURE_CHECK_TAINTED_MODULE is not set
+# CONFIG_FEATURE_2_4_MODULES is not set
+# CONFIG_FEATURE_2_6_MODULES is not set
+# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
+
+#
+# Linux System Utilities
+#
+CONFIG_DMESG=y
+CONFIG_FEATURE_DMESG_PRETTY=y
+# CONFIG_FBSET is not set
+# CONFIG_FEATURE_FBSET_FANCY is not set
+# CONFIG_FEATURE_FBSET_READMODE is not set
+# CONFIG_FDFLUSH is not set
+CONFIG_FDFORMAT=y
+CONFIG_FDISK=y
+CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
+CONFIG_FEATURE_FDISK_WRITABLE=y
+# CONFIG_FEATURE_AIX_LABEL is not set
+# CONFIG_FEATURE_SGI_LABEL is not set
+# CONFIG_FEATURE_SUN_LABEL is not set
+# CONFIG_FEATURE_OSF_LABEL is not set
+# CONFIG_FEATURE_FDISK_ADVANCED is not set
+# CONFIG_FREERAMDISK is not set
+# CONFIG_FSCK_MINIX is not set
+# CONFIG_MKFS_MINIX is not set
+# CONFIG_FEATURE_MINIX2 is not set
+CONFIG_GETOPT=y
+CONFIG_HEXDUMP=y
+CONFIG_HWCLOCK=y
+# CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS is not set
+# CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS is not set
+CONFIG_IPCRM=y
+CONFIG_IPCS=y
+# CONFIG_LOSETUP is not set
+CONFIG_MDEV=y
+CONFIG_FEATURE_MDEV_CONF=y
+CONFIG_FEATURE_MDEV_EXEC=y
+# CONFIG_FEATURE_MDEV_LOAD_FIRMWARE is not set
+CONFIG_MKSWAP=y
+# CONFIG_FEATURE_MKSWAP_V0 is not set
+CONFIG_MORE=y
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_MOUNT=y
+CONFIG_FEATURE_MOUNT_NFS=y
+CONFIG_FEATURE_MOUNT_CIFS=y
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
+CONFIG_PIVOT_ROOT=y
+CONFIG_RDATE=y
+# CONFIG_READPROFILE is not set
+# CONFIG_SETARCH is not set
+CONFIG_SWAPONOFF=y
+CONFIG_SWITCH_ROOT=y
+CONFIG_UMOUNT=y
+CONFIG_FEATURE_UMOUNT_ALL=y
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+# CONFIG_FEATURE_MTAB_SUPPORT is not set
+
+#
+# Miscellaneous Utilities
+#
+# CONFIG_ADJTIMEX is not set
+# CONFIG_BBCONFIG is not set
+# CONFIG_CHRT is not set
+# CONFIG_CROND is not set
+# CONFIG_DEBUG_CROND_OPTION is not set
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+# CONFIG_CRONTAB is not set
+# CONFIG_DC is not set
+# CONFIG_DEVFSD is not set
+# CONFIG_DEVFSD_MODLOAD is not set
+# CONFIG_DEVFSD_FG_NP is not set
+# CONFIG_DEVFSD_VERBOSE is not set
+# CONFIG_FEATURE_DEVFS is not set
+# CONFIG_EJECT is not set
+# CONFIG_LAST is not set
+CONFIG_LESS=y
+CONFIG_FEATURE_LESS_MAXLINES=9999999
+# CONFIG_FEATURE_LESS_BRACKETS is not set
+# CONFIG_FEATURE_LESS_FLAGS is not set
+# CONFIG_FEATURE_LESS_FLAGCS is not set
+# CONFIG_FEATURE_LESS_MARKS is not set
+CONFIG_FEATURE_LESS_REGEXP=y
+# CONFIG_HDPARM is not set
+# CONFIG_FEATURE_HDPARM_GET_IDENTITY is not set
+# CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF is not set
+# CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF is not set
+# CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET is not set
+# CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF is not set
+# CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA is not set
+# CONFIG_MAKEDEVS is not set
+# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
+# CONFIG_FEATURE_MAKEDEVS_TABLE is not set
+# CONFIG_MOUNTPOINT is not set
+# CONFIG_MT is not set
+# CONFIG_RAIDAUTORUN is not set
+# CONFIG_READAHEAD is not set
+# CONFIG_RUNLEVEL is not set
+CONFIG_RX=y
+CONFIG_STRINGS=y
+# CONFIG_SETSID is not set
+# CONFIG_TASKSET is not set
+# CONFIG_FEATURE_TASKSET_FANCY is not set
+CONFIG_TIME=y
+# CONFIG_TTYSIZE is not set
+CONFIG_WATCHDOG=y
+
+#
+# Networking Utilities
+#
+CONFIG_FEATURE_IPV6=y
+# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
+CONFIG_ARP=y
+CONFIG_ARPING=y
+# CONFIG_DNSD is not set
+# CONFIG_ETHER_WAKE is not set
+# CONFIG_FAKEIDENTD is not set
+# CONFIG_FTPGET is not set
+# CONFIG_FTPPUT is not set
+# CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS is not set
+CONFIG_HOSTNAME=y
+# CONFIG_HTTPD is not set
+# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set
+# CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP is not set
+# CONFIG_FEATURE_HTTPD_SETUID is not set
+# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
+# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
+# CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES is not set
+# CONFIG_FEATURE_HTTPD_CGI is not set
+# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set
+# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set
+# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set
+# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+# CONFIG_FEATURE_IFCONFIG_SLIP is not set
+# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
+CONFIG_FEATURE_IFCONFIG_HW=y
+# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
+CONFIG_IFUPDOWN=y
+CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
+# CONFIG_FEATURE_IFUPDOWN_IP is not set
+# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set
+CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN=y
+CONFIG_FEATURE_IFUPDOWN_IPV4=y
+CONFIG_FEATURE_IFUPDOWN_IPV6=y
+# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set
+CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
+# CONFIG_INETD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set
+# CONFIG_FEATURE_INETD_RPC is not set
+# CONFIG_IP is not set
+# CONFIG_FEATURE_IP_ADDRESS is not set
+# CONFIG_FEATURE_IP_LINK is not set
+# CONFIG_FEATURE_IP_ROUTE is not set
+# CONFIG_FEATURE_IP_TUNNEL is not set
+# CONFIG_FEATURE_IP_RULE is not set
+# CONFIG_FEATURE_IP_SHORT_FORMS is not set
+# CONFIG_IPADDR is not set
+# CONFIG_IPLINK is not set
+# CONFIG_IPROUTE is not set
+# CONFIG_IPTUNNEL is not set
+# CONFIG_IPRULE is not set
+# CONFIG_IPCALC is not set
+# CONFIG_FEATURE_IPCALC_FANCY is not set
+# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set
+# CONFIG_NAMEIF is not set
+# CONFIG_NC is not set
+# CONFIG_NC_SERVER is not set
+# CONFIG_NC_EXTRA is not set
+CONFIG_NETSTAT=y
+CONFIG_FEATURE_NETSTAT_WIDE=y
+CONFIG_NSLOOKUP=y
+CONFIG_PING=y
+CONFIG_PING6=y
+# CONFIG_PSCAN is not set
+CONFIG_FEATURE_FANCY_PING=y
+CONFIG_ROUTE=y
+# CONFIG_SLATTACH is not set
+CONFIG_TELNET=y
+CONFIG_FEATURE_TELNET_TTYPE=y
+# CONFIG_FEATURE_TELNET_AUTOLOGIN is not set
+# CONFIG_TELNETD is not set
+# CONFIG_FEATURE_TELNETD_STANDALONE is not set
+# CONFIG_TFTP is not set
+# CONFIG_FEATURE_TFTP_GET is not set
+# CONFIG_FEATURE_TFTP_PUT is not set
+# CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
+# CONFIG_DEBUG_TFTP is not set
+CONFIG_TRACEROUTE=y
+CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
+# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
+# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
+# CONFIG_APP_UDHCPD is not set
+# CONFIG_APP_DHCPRELAY is not set
+# CONFIG_APP_DUMPLEASES is not set
+# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
+CONFIG_APP_UDHCPC=y
+# CONFIG_FEATURE_UDHCP_DEBUG is not set
+# CONFIG_FEATURE_RFC3397 is not set
+CONFIG_VCONFIG=y
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
+# CONFIG_ZCIP is not set
+
+#
+# Process Utilities
+#
+CONFIG_FREE=y
+# CONFIG_FUSER is not set
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_KILLALL5=y
+# CONFIG_NMETER is not set
+CONFIG_PIDOF=y
+CONFIG_FEATURE_PIDOF_SINGLE=y
+CONFIG_FEATURE_PIDOF_OMIT=y
+CONFIG_PS=y
+CONFIG_FEATURE_PS_WIDE=y
+# CONFIG_RENICE is not set
+# CONFIG_BB_SYSCTL is not set
+CONFIG_TOP=y
+CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
+CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
+# CONFIG_FEATURE_TOP_DECIMALS is not set
+CONFIG_UPTIME=y
+CONFIG_WATCH=y
+
+#
+# Shells
+#
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_LASH is not set
+# CONFIG_FEATURE_SH_IS_MSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+CONFIG_ASH=y
+
+#
+# Ash Shell Options
+#
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_READ_NCHARS=y
+CONFIG_ASH_READ_TIMEOUT=y
+CONFIG_ASH_ALIAS=y
+CONFIG_ASH_MATH_SUPPORT=y
+CONFIG_ASH_MATH_SUPPORT_64=y
+# CONFIG_ASH_GETOPTS is not set
+CONFIG_ASH_BUILTIN_ECHO=y
+CONFIG_ASH_BUILTIN_TEST=y
+# CONFIG_ASH_CMDCMD is not set
+# CONFIG_ASH_MAIL is not set
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+# CONFIG_ASH_RANDOM_SUPPORT is not set
+CONFIG_ASH_EXPAND_PRMT=y
+# CONFIG_HUSH is not set
+# CONFIG_HUSH_HELP is not set
+# CONFIG_HUSH_INTERACTIVE is not set
+# CONFIG_HUSH_JOB is not set
+# CONFIG_HUSH_TICK is not set
+# CONFIG_HUSH_IF is not set
+# CONFIG_HUSH_LOOPS is not set
+# CONFIG_LASH is not set
+# CONFIG_MSH is not set
+
+#
+# Bourne Shell Options
+#
+# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
+# CONFIG_FEATURE_SH_STANDALONE is not set
+# CONFIG_CTTYHACK is not set
+
+#
+# System Logging Utilities
+#
+CONFIG_SYSLOGD=y
+CONFIG_FEATURE_ROTATE_LOGFILE=y
+# CONFIG_FEATURE_REMOTE_LOG is not set
+# CONFIG_FEATURE_IPC_SYSLOG is not set
+CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=
+# CONFIG_LOGREAD is not set
+# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
+CONFIG_KLOGD=y
+CONFIG_LOGGER=y
+
+#
+# Runit Utilities
+#
+# CONFIG_RUNSV is not set
+# CONFIG_RUNSVDIR is not set
+# CONFIG_SV is not set
+# CONFIG_SVLOGD is not set
+# CONFIG_CHPST is not set
+# CONFIG_SETUIDGID is not set
+# CONFIG_ENVUIDGID is not set
+# CONFIG_ENVDIR is not set
+# CONFIG_SOFTLIMIT is not set
+# CONFIG_CHCON is not set
+# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
+# CONFIG_GETENFORCE is not set
+# CONFIG_GETSEBOOL is not set
+# CONFIG_LOAD_POLICY is not set
+# CONFIG_MATCHPATHCON is not set
+# CONFIG_RESTORECON is not set
+# CONFIG_RUNCON is not set
+# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
+# CONFIG_SELINUXENABLED is not set
+# CONFIG_SETENFORCE is not set
+# CONFIG_SETFILES is not set
+# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
+
+#
+# ipsvd utilities
+#
+# CONFIG_TCPSVD is not set
+# CONFIG_UDPSVD is not set
diff --git a/target/device/Atmel/atngw100-base/busybox-1.8.0.config b/target/device/Atmel/atngw100-base/busybox-1.8.0.config
new file mode 100644
index 000000000..7dd45cd2e
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/busybox-1.8.0.config
@@ -0,0 +1,767 @@
+#
+# Automatically generated make config: don't edit
+# Busybox version: 1.8.2
+# Sun Dec 23 12:11:59 2007
+#
+CONFIG_HAVE_DOT_CONFIG=y
+
+#
+# Busybox Settings
+#
+
+#
+# General Configuration
+#
+# CONFIG_NITPICK is not set
+# CONFIG_DESKTOP is not set
+# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
+# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_SHOW_USAGE=y
+CONFIG_FEATURE_VERBOSE_USAGE=y
+# CONFIG_FEATURE_COMPRESS_USAGE is not set
+# CONFIG_FEATURE_INSTALLER is not set
+# CONFIG_LOCALE_SUPPORT is not set
+CONFIG_GETOPT_LONG=y
+CONFIG_FEATURE_DEVPTS=y
+# CONFIG_FEATURE_CLEAN_UP is not set
+# CONFIG_FEATURE_PIDFILE is not set
+CONFIG_FEATURE_SUID=y
+# CONFIG_FEATURE_SUID_CONFIG is not set
+# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set
+# CONFIG_SELINUX is not set
+# CONFIG_FEATURE_PREFER_APPLETS is not set
+CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
+CONFIG_FEATURE_SYSLOG=y
+CONFIG_FEATURE_HAVE_RPC=y
+
+#
+# Build Options
+#
+CONFIG_STATIC=y
+CONFIG_BUILD_LIBBUSYBOX=y
+# CONFIG_FEATURE_INDIVIDUAL is not set
+# CONFIG_FEATURE_SHARED_BUSYBOX is not set
+CONFIG_LFS=y
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_WERROR is not set
+CONFIG_NO_DEBUG_LIB=y
+# CONFIG_DMALLOC is not set
+# CONFIG_EFENCE is not set
+CONFIG_INCLUDE_SUSv2=y
+
+#
+# Installation Options
+#
+# CONFIG_INSTALL_NO_USR is not set
+CONFIG_INSTALL_APPLET_SYMLINKS=y
+# CONFIG_INSTALL_APPLET_HARDLINKS is not set
+# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
+# CONFIG_INSTALL_APPLET_DONT is not set
+# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
+# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
+# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
+CONFIG_PREFIX="/usr/avr32-linux"
+
+#
+# Busybox Library Tuning
+#
+CONFIG_PASSWORD_MINLEN=6
+CONFIG_MD5_SIZE_VS_SPEED=2
+CONFIG_FEATURE_FAST_TOP=y
+# CONFIG_FEATURE_ETC_NETWORKS is not set
+CONFIG_FEATURE_EDITING=y
+CONFIG_FEATURE_EDITING_MAX_LEN=1024
+CONFIG_FEATURE_EDITING_FANCY_KEYS=y
+# CONFIG_FEATURE_EDITING_VI is not set
+CONFIG_FEATURE_EDITING_HISTORY=100
+CONFIG_FEATURE_EDITING_SAVEHISTORY=y
+CONFIG_FEATURE_TAB_COMPLETION=y
+# CONFIG_FEATURE_USERNAME_COMPLETION is not set
+CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
+CONFIG_MONOTONIC_SYSCALL=y
+CONFIG_IOCTL_HEX2STR_ERROR=y
+
+#
+# Applets
+#
+
+#
+# Archival Utilities
+#
+CONFIG_AR=y
+CONFIG_FEATURE_AR_LONG_FILENAMES=y
+CONFIG_BUNZIP2=y
+CONFIG_BZIP2=y
+CONFIG_CPIO=y
+CONFIG_DPKG=y
+CONFIG_DPKG_DEB=y
+# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
+CONFIG_GUNZIP=y
+CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y
+CONFIG_GZIP=y
+CONFIG_RPM2CPIO=y
+CONFIG_RPM=y
+CONFIG_FEATURE_RPM_BZ2=y
+CONFIG_TAR=y
+CONFIG_FEATURE_TAR_CREATE=y
+CONFIG_FEATURE_TAR_BZIP2=y
+CONFIG_FEATURE_TAR_LZMA=y
+CONFIG_FEATURE_TAR_FROM=y
+CONFIG_FEATURE_TAR_GZIP=y
+CONFIG_FEATURE_TAR_COMPRESS=y
+CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
+CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY=y
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+CONFIG_FEATURE_TAR_LONG_OPTIONS=y
+CONFIG_UNCOMPRESS=y
+CONFIG_UNLZMA=y
+CONFIG_FEATURE_LZMA_FAST=y
+CONFIG_UNZIP=y
+
+#
+# Common options for cpio and tar
+#
+# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
+
+#
+# Common options for dpkg and dpkg_deb
+#
+CONFIG_FEATURE_DEB_TAR_GZ=y
+CONFIG_FEATURE_DEB_TAR_BZ2=y
+CONFIG_FEATURE_DEB_TAR_LZMA=y
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+CONFIG_CAL=y
+CONFIG_CAT=y
+CONFIG_CATV=y
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+CONFIG_CHROOT=y
+CONFIG_CKSUM=y
+CONFIG_COMM=y
+CONFIG_CP=y
+CONFIG_CUT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+CONFIG_FEATURE_DD_IBS_OBS=y
+CONFIG_DF=y
+CONFIG_DIRNAME=y
+CONFIG_DOS2UNIX=y
+CONFIG_UNIX2DOS=y
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+CONFIG_FEATURE_ENV_LONG_OPTIONS=y
+CONFIG_EXPAND=y
+CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
+CONFIG_EXPR=y
+CONFIG_EXPR_MATH_SUPPORT_64=y
+CONFIG_FALSE=y
+CONFIG_FOLD=y
+CONFIG_HEAD=y
+CONFIG_FEATURE_FANCY_HEAD=y
+CONFIG_HOSTID=y
+CONFIG_ID=y
+CONFIG_INSTALL=y
+CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
+CONFIG_LENGTH=y
+CONFIG_LN=y
+CONFIG_LOGNAME=y
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=y
+CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
+CONFIG_MD5SUM=y
+CONFIG_MKDIR=y
+CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
+CONFIG_MKFIFO=y
+CONFIG_MKNOD=y
+CONFIG_MV=y
+CONFIG_FEATURE_MV_LONG_OPTIONS=y
+CONFIG_NICE=y
+CONFIG_NOHUP=y
+CONFIG_OD=y
+CONFIG_PRINTENV=y
+CONFIG_PRINTF=y
+CONFIG_PWD=y
+CONFIG_READLINK=y
+CONFIG_FEATURE_READLINK_FOLLOW=y
+CONFIG_REALPATH=y
+CONFIG_RM=y
+CONFIG_RMDIR=y
+CONFIG_SEQ=y
+CONFIG_SHA1SUM=y
+CONFIG_SLEEP=y
+CONFIG_FEATURE_FANCY_SLEEP=y
+CONFIG_SORT=y
+CONFIG_FEATURE_SORT_BIG=y
+CONFIG_SPLIT=y
+CONFIG_FEATURE_SPLIT_FANCY=y
+CONFIG_STAT=y
+CONFIG_FEATURE_STAT_FORMAT=y
+CONFIG_STTY=y
+CONFIG_SUM=y
+CONFIG_SYNC=y
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=y
+CONFIG_TEE=y
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+CONFIG_TEST=y
+CONFIG_FEATURE_TEST_64=y
+CONFIG_TOUCH=y
+CONFIG_TR=y
+CONFIG_FEATURE_TR_CLASSES=y
+CONFIG_FEATURE_TR_EQUIV=y
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+CONFIG_UNEXPAND=y
+CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+CONFIG_UUDECODE=y
+CONFIG_UUENCODE=y
+CONFIG_WC=y
+CONFIG_FEATURE_WC_LARGE=y
+CONFIG_WHO=y
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls, more and telnet
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Common options for md5sum, sha1sum
+#
+CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=y
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+CONFIG_DUMPKMAP=y
+CONFIG_KBD_MODE=y
+CONFIG_LOADFONT=y
+CONFIG_LOADKMAP=y
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+CONFIG_RESIZE=y
+CONFIG_FEATURE_RESIZE_PRINT=y
+CONFIG_SETCONSOLE=y
+CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
+CONFIG_SETKEYCODES=y
+CONFIG_SETLOGCONS=y
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+# CONFIG_PIPE_PROGRESS is not set
+CONFIG_RUN_PARTS=y
+CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
+# CONFIG_FEATURE_RUN_PARTS_FANCY is not set
+CONFIG_START_STOP_DAEMON=y
+CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
+CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
+CONFIG_WHICH=y
+
+#
+# Editors
+#
+CONFIG_AWK=y
+CONFIG_FEATURE_AWK_MATH=y
+CONFIG_CMP=y
+CONFIG_DIFF=y
+CONFIG_FEATURE_DIFF_BINARY=y
+CONFIG_FEATURE_DIFF_DIR=y
+CONFIG_FEATURE_DIFF_MINIMAL=y
+CONFIG_ED=y
+CONFIG_PATCH=y
+CONFIG_SED=y
+CONFIG_VI=y
+CONFIG_FEATURE_VI_MAX_LEN=1024
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+CONFIG_FEATURE_ALLOW_EXEC=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_PRINT0=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_MMIN=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+CONFIG_FEATURE_FIND_MAXDEPTH=y
+CONFIG_FEATURE_FIND_NEWER=y
+CONFIG_FEATURE_FIND_INUM=y
+CONFIG_FEATURE_FIND_EXEC=y
+CONFIG_FEATURE_FIND_USER=y
+CONFIG_FEATURE_FIND_GROUP=y
+CONFIG_FEATURE_FIND_NOT=y
+CONFIG_FEATURE_FIND_DEPTH=y
+CONFIG_FEATURE_FIND_PAREN=y
+CONFIG_FEATURE_FIND_SIZE=y
+CONFIG_FEATURE_FIND_PRUNE=y
+CONFIG_FEATURE_FIND_DELETE=y
+CONFIG_FEATURE_FIND_PATH=y
+CONFIG_FEATURE_FIND_REGEX=y
+# CONFIG_FEATURE_FIND_CONTEXT is not set
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+CONFIG_XARGS=y
+CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
+CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+
+#
+# Init Utilities
+#
+CONFIG_INIT=y
+# CONFIG_DEBUG_INIT is not set
+CONFIG_FEATURE_USE_INITTAB=y
+CONFIG_FEATURE_INIT_SCTTY=y
+CONFIG_FEATURE_INIT_SYSLOG=y
+CONFIG_FEATURE_EXTRA_QUIET=y
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+CONFIG_FEATURE_INITRD=y
+CONFIG_HALT=y
+CONFIG_MESG=y
+
+#
+# Login/Password Management Utilities
+#
+CONFIG_FEATURE_SHADOWPASSWDS=y
+# CONFIG_USE_BB_SHADOW is not set
+# CONFIG_USE_BB_PWD_GRP is not set
+CONFIG_ADDGROUP=y
+CONFIG_FEATURE_ADDUSER_TO_GROUP=y
+CONFIG_DELGROUP=y
+CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
+CONFIG_ADDUSER=y
+CONFIG_DELUSER=y
+CONFIG_GETTY=y
+CONFIG_FEATURE_UTMP=y
+CONFIG_FEATURE_WTMP=y
+CONFIG_LOGIN=y
+# CONFIG_PAM is not set
+CONFIG_LOGIN_SCRIPTS=y
+CONFIG_FEATURE_NOLOGIN=y
+CONFIG_FEATURE_SECURETTY=y
+CONFIG_PASSWD=y
+CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
+# CONFIG_CRYPTPW is not set
+# CONFIG_CHPASSWD is not set
+CONFIG_SU=y
+CONFIG_FEATURE_SU_SYSLOG=y
+CONFIG_FEATURE_SU_CHECKS_SHELLS=y
+CONFIG_SULOGIN=y
+CONFIG_VLOCK=y
+
+#
+# Linux Ext2 FS Progs
+#
+CONFIG_CHATTR=y
+CONFIG_FSCK=y
+CONFIG_LSATTR=y
+
+#
+# Linux Module Utilities
+#
+CONFIG_INSMOD=y
+# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
+# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
+# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
+CONFIG_FEATURE_INSMOD_LOAD_MAP=y
+CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL=y
+CONFIG_RMMOD=y
+CONFIG_LSMOD=y
+CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
+CONFIG_MODPROBE=y
+CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y
+CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y
+
+#
+# Options common to multiple modutils
+#
+CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+# CONFIG_FEATURE_2_4_MODULES is not set
+CONFIG_FEATURE_2_6_MODULES=y
+# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
+
+#
+# Linux System Utilities
+#
+CONFIG_DMESG=y
+CONFIG_FEATURE_DMESG_PRETTY=y
+CONFIG_FBSET=y
+CONFIG_FEATURE_FBSET_FANCY=y
+CONFIG_FEATURE_FBSET_READMODE=y
+CONFIG_FDFLUSH=y
+CONFIG_FDFORMAT=y
+CONFIG_FDISK=y
+CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
+CONFIG_FEATURE_FDISK_WRITABLE=y
+# CONFIG_FEATURE_AIX_LABEL is not set
+# CONFIG_FEATURE_SGI_LABEL is not set
+# CONFIG_FEATURE_SUN_LABEL is not set
+# CONFIG_FEATURE_OSF_LABEL is not set
+# CONFIG_FEATURE_FDISK_ADVANCED is not set
+# CONFIG_FREERAMDISK is not set
+# CONFIG_FSCK_MINIX is not set
+# CONFIG_MKFS_MINIX is not set
+# CONFIG_FEATURE_MINIX2 is not set
+CONFIG_GETOPT=y
+CONFIG_HEXDUMP=y
+CONFIG_HWCLOCK=y
+# CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS is not set
+# CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS is not set
+CONFIG_IPCRM=y
+CONFIG_IPCS=y
+CONFIG_LOSETUP=y
+CONFIG_MDEV=y
+CONFIG_FEATURE_MDEV_CONF=y
+CONFIG_FEATURE_MDEV_EXEC=y
+CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
+CONFIG_MKSWAP=y
+# CONFIG_FEATURE_MKSWAP_V0 is not set
+CONFIG_MORE=y
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_MOUNT=y
+CONFIG_FEATURE_MOUNT_HELPERS=y
+CONFIG_FEATURE_MOUNT_NFS=y
+CONFIG_FEATURE_MOUNT_CIFS=y
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
+CONFIG_PIVOT_ROOT=y
+CONFIG_RDATE=y
+CONFIG_READPROFILE=y
+CONFIG_SETARCH=y
+CONFIG_SWAPONOFF=y
+CONFIG_SWITCH_ROOT=y
+CONFIG_UMOUNT=y
+CONFIG_FEATURE_UMOUNT_ALL=y
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+CONFIG_FEATURE_MTAB_SUPPORT=y
+
+#
+# Miscellaneous Utilities
+#
+# CONFIG_ADJTIMEX is not set
+CONFIG_BBCONFIG=y
+CONFIG_CHRT=y
+CONFIG_CROND=y
+CONFIG_DEBUG_CROND_OPTION=y
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+CONFIG_CRONTAB=y
+CONFIG_DC=y
+# CONFIG_DEVFSD is not set
+# CONFIG_DEVFSD_MODLOAD is not set
+# CONFIG_DEVFSD_FG_NP is not set
+# CONFIG_DEVFSD_VERBOSE is not set
+# CONFIG_FEATURE_DEVFS is not set
+# CONFIG_EJECT is not set
+CONFIG_LAST=y
+CONFIG_LESS=y
+CONFIG_FEATURE_LESS_MAXLINES=9999999
+CONFIG_FEATURE_LESS_BRACKETS=y
+CONFIG_FEATURE_LESS_FLAGS=y
+CONFIG_FEATURE_LESS_FLAGCS=y
+CONFIG_FEATURE_LESS_MARKS=y
+CONFIG_FEATURE_LESS_REGEXP=y
+CONFIG_HDPARM=y
+CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
+CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
+CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
+CONFIG_MAKEDEVS=y
+# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
+CONFIG_FEATURE_MAKEDEVS_TABLE=y
+CONFIG_MICROCOM=y
+CONFIG_MOUNTPOINT=y
+CONFIG_MT=y
+# CONFIG_RAIDAUTORUN is not set
+# CONFIG_READAHEAD is not set
+CONFIG_RUNLEVEL=y
+CONFIG_RX=y
+CONFIG_STRINGS=y
+CONFIG_SETSID=y
+# CONFIG_TASKSET is not set
+# CONFIG_FEATURE_TASKSET_FANCY is not set
+CONFIG_TIME=y
+CONFIG_TTYSIZE=y
+CONFIG_WATCHDOG=y
+
+#
+# Networking Utilities
+#
+CONFIG_FEATURE_IPV6=y
+# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
+CONFIG_ARP=y
+CONFIG_ARPING=y
+CONFIG_DNSD=y
+CONFIG_ETHER_WAKE=y
+# CONFIG_FAKEIDENTD is not set
+CONFIG_FTPGET=y
+CONFIG_FTPPUT=y
+CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
+CONFIG_HOSTNAME=y
+CONFIG_HTTPD=y
+CONFIG_FEATURE_HTTPD_RANGES=y
+CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
+CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP=y
+CONFIG_FEATURE_HTTPD_SETUID=y
+CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
+CONFIG_FEATURE_HTTPD_AUTH_MD5=y
+CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES=y
+CONFIG_FEATURE_HTTPD_CGI=y
+CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
+CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
+CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
+CONFIG_FEATURE_HTTPD_ERROR_PAGES=y
+CONFIG_FEATURE_HTTPD_PROXY=y
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+# CONFIG_FEATURE_IFCONFIG_SLIP is not set
+# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
+CONFIG_FEATURE_IFCONFIG_HW=y
+# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
+CONFIG_IFUPDOWN=y
+CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
+# CONFIG_FEATURE_IFUPDOWN_IP is not set
+# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set
+CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN=y
+CONFIG_FEATURE_IFUPDOWN_IPV4=y
+CONFIG_FEATURE_IFUPDOWN_IPV6=y
+# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set
+CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
+CONFIG_INETD=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN=y
+CONFIG_FEATURE_INETD_RPC=y
+# CONFIG_IP is not set
+# CONFIG_FEATURE_IP_ADDRESS is not set
+# CONFIG_FEATURE_IP_LINK is not set
+# CONFIG_FEATURE_IP_ROUTE is not set
+# CONFIG_FEATURE_IP_TUNNEL is not set
+# CONFIG_FEATURE_IP_RULE is not set
+# CONFIG_FEATURE_IP_SHORT_FORMS is not set
+# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
+# CONFIG_IPADDR is not set
+# CONFIG_IPLINK is not set
+# CONFIG_IPROUTE is not set
+# CONFIG_IPTUNNEL is not set
+# CONFIG_IPRULE is not set
+# CONFIG_IPCALC is not set
+# CONFIG_FEATURE_IPCALC_FANCY is not set
+# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set
+# CONFIG_NAMEIF is not set
+# CONFIG_NC is not set
+# CONFIG_NC_SERVER is not set
+# CONFIG_NC_EXTRA is not set
+CONFIG_NETSTAT=y
+CONFIG_FEATURE_NETSTAT_WIDE=y
+CONFIG_NSLOOKUP=y
+CONFIG_PING=y
+CONFIG_PING6=y
+CONFIG_PSCAN=y
+CONFIG_FEATURE_FANCY_PING=y
+CONFIG_ROUTE=y
+# CONFIG_SLATTACH is not set
+CONFIG_TELNET=y
+CONFIG_FEATURE_TELNET_TTYPE=y
+CONFIG_FEATURE_TELNET_AUTOLOGIN=y
+CONFIG_TELNETD=y
+CONFIG_FEATURE_TELNETD_STANDALONE=y
+CONFIG_TFTP=y
+CONFIG_FEATURE_TFTP_GET=y
+CONFIG_FEATURE_TFTP_PUT=y
+CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+# CONFIG_DEBUG_TFTP is not set
+CONFIG_TRACEROUTE=y
+CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
+# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
+# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
+CONFIG_APP_UDHCPD=y
+# CONFIG_APP_DHCPRELAY is not set
+# CONFIG_APP_DUMPLEASES is not set
+# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
+CONFIG_APP_UDHCPC=y
+# CONFIG_FEATURE_UDHCP_DEBUG is not set
+# CONFIG_FEATURE_RFC3397 is not set
+CONFIG_VCONFIG=y
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
+# CONFIG_ZCIP is not set
+
+#
+# Process Utilities
+#
+CONFIG_FREE=y
+CONFIG_FUSER=y
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_KILLALL5=y
+CONFIG_NMETER=y
+CONFIG_PGREP=y
+CONFIG_PIDOF=y
+CONFIG_FEATURE_PIDOF_SINGLE=y
+CONFIG_FEATURE_PIDOF_OMIT=y
+CONFIG_PKILL=y
+CONFIG_PS=y
+CONFIG_FEATURE_PS_WIDE=y
+CONFIG_RENICE=y
+CONFIG_BB_SYSCTL=y
+CONFIG_TOP=y
+CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
+CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
+CONFIG_FEATURE_TOP_DECIMALS=y
+CONFIG_FEATURE_TOPMEM=y
+CONFIG_UPTIME=y
+CONFIG_WATCH=y
+
+#
+# Shells
+#
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_LASH is not set
+# CONFIG_FEATURE_SH_IS_MSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+CONFIG_ASH=y
+
+#
+# Ash Shell Options
+#
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_READ_NCHARS=y
+CONFIG_ASH_READ_TIMEOUT=y
+CONFIG_ASH_ALIAS=y
+CONFIG_ASH_MATH_SUPPORT=y
+CONFIG_ASH_MATH_SUPPORT_64=y
+CONFIG_ASH_GETOPTS=y
+CONFIG_ASH_BUILTIN_ECHO=y
+CONFIG_ASH_BUILTIN_TEST=y
+# CONFIG_ASH_CMDCMD is not set
+# CONFIG_ASH_MAIL is not set
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+# CONFIG_ASH_RANDOM_SUPPORT is not set
+CONFIG_ASH_EXPAND_PRMT=y
+# CONFIG_HUSH is not set
+# CONFIG_HUSH_HELP is not set
+# CONFIG_HUSH_INTERACTIVE is not set
+# CONFIG_HUSH_JOB is not set
+# CONFIG_HUSH_TICK is not set
+# CONFIG_HUSH_IF is not set
+# CONFIG_HUSH_LOOPS is not set
+# CONFIG_LASH is not set
+# CONFIG_MSH is not set
+
+#
+# Bourne Shell Options
+#
+# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
+# CONFIG_FEATURE_SH_STANDALONE is not set
+# CONFIG_CTTYHACK is not set
+
+#
+# System Logging Utilities
+#
+CONFIG_SYSLOGD=y
+CONFIG_FEATURE_ROTATE_LOGFILE=y
+# CONFIG_FEATURE_REMOTE_LOG is not set
+# CONFIG_FEATURE_IPC_SYSLOG is not set
+CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=
+# CONFIG_LOGREAD is not set
+# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
+CONFIG_KLOGD=y
+CONFIG_LOGGER=y
+
+#
+# Runit Utilities
+#
+# CONFIG_RUNSV is not set
+# CONFIG_RUNSVDIR is not set
+# CONFIG_SV is not set
+# CONFIG_SVLOGD is not set
+# CONFIG_CHPST is not set
+# CONFIG_SETUIDGID is not set
+# CONFIG_ENVUIDGID is not set
+# CONFIG_ENVDIR is not set
+# CONFIG_SOFTLIMIT is not set
+# CONFIG_CHCON is not set
+# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
+# CONFIG_GETENFORCE is not set
+# CONFIG_GETSEBOOL is not set
+# CONFIG_LOAD_POLICY is not set
+# CONFIG_MATCHPATHCON is not set
+# CONFIG_RESTORECON is not set
+# CONFIG_RUNCON is not set
+# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
+# CONFIG_SELINUXENABLED is not set
+# CONFIG_SETENFORCE is not set
+# CONFIG_SETFILES is not set
+# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
+# CONFIG_SETSEBOOL is not set
+
+#
+# ipsvd utilities
+#
+# CONFIG_TCPSVD is not set
+# CONFIG_UDPSVD is not set
diff --git a/target/device/Atmel/atngw100-base/busybox-1.9.0.config b/target/device/Atmel/atngw100-base/busybox-1.9.0.config
new file mode 100644
index 000000000..7dd45cd2e
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/busybox-1.9.0.config
@@ -0,0 +1,767 @@
+#
+# Automatically generated make config: don't edit
+# Busybox version: 1.8.2
+# Sun Dec 23 12:11:59 2007
+#
+CONFIG_HAVE_DOT_CONFIG=y
+
+#
+# Busybox Settings
+#
+
+#
+# General Configuration
+#
+# CONFIG_NITPICK is not set
+# CONFIG_DESKTOP is not set
+# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
+# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_SHOW_USAGE=y
+CONFIG_FEATURE_VERBOSE_USAGE=y
+# CONFIG_FEATURE_COMPRESS_USAGE is not set
+# CONFIG_FEATURE_INSTALLER is not set
+# CONFIG_LOCALE_SUPPORT is not set
+CONFIG_GETOPT_LONG=y
+CONFIG_FEATURE_DEVPTS=y
+# CONFIG_FEATURE_CLEAN_UP is not set
+# CONFIG_FEATURE_PIDFILE is not set
+CONFIG_FEATURE_SUID=y
+# CONFIG_FEATURE_SUID_CONFIG is not set
+# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set
+# CONFIG_SELINUX is not set
+# CONFIG_FEATURE_PREFER_APPLETS is not set
+CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
+CONFIG_FEATURE_SYSLOG=y
+CONFIG_FEATURE_HAVE_RPC=y
+
+#
+# Build Options
+#
+CONFIG_STATIC=y
+CONFIG_BUILD_LIBBUSYBOX=y
+# CONFIG_FEATURE_INDIVIDUAL is not set
+# CONFIG_FEATURE_SHARED_BUSYBOX is not set
+CONFIG_LFS=y
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_WERROR is not set
+CONFIG_NO_DEBUG_LIB=y
+# CONFIG_DMALLOC is not set
+# CONFIG_EFENCE is not set
+CONFIG_INCLUDE_SUSv2=y
+
+#
+# Installation Options
+#
+# CONFIG_INSTALL_NO_USR is not set
+CONFIG_INSTALL_APPLET_SYMLINKS=y
+# CONFIG_INSTALL_APPLET_HARDLINKS is not set
+# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
+# CONFIG_INSTALL_APPLET_DONT is not set
+# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
+# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
+# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
+CONFIG_PREFIX="/usr/avr32-linux"
+
+#
+# Busybox Library Tuning
+#
+CONFIG_PASSWORD_MINLEN=6
+CONFIG_MD5_SIZE_VS_SPEED=2
+CONFIG_FEATURE_FAST_TOP=y
+# CONFIG_FEATURE_ETC_NETWORKS is not set
+CONFIG_FEATURE_EDITING=y
+CONFIG_FEATURE_EDITING_MAX_LEN=1024
+CONFIG_FEATURE_EDITING_FANCY_KEYS=y
+# CONFIG_FEATURE_EDITING_VI is not set
+CONFIG_FEATURE_EDITING_HISTORY=100
+CONFIG_FEATURE_EDITING_SAVEHISTORY=y
+CONFIG_FEATURE_TAB_COMPLETION=y
+# CONFIG_FEATURE_USERNAME_COMPLETION is not set
+CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
+CONFIG_MONOTONIC_SYSCALL=y
+CONFIG_IOCTL_HEX2STR_ERROR=y
+
+#
+# Applets
+#
+
+#
+# Archival Utilities
+#
+CONFIG_AR=y
+CONFIG_FEATURE_AR_LONG_FILENAMES=y
+CONFIG_BUNZIP2=y
+CONFIG_BZIP2=y
+CONFIG_CPIO=y
+CONFIG_DPKG=y
+CONFIG_DPKG_DEB=y
+# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
+CONFIG_GUNZIP=y
+CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y
+CONFIG_GZIP=y
+CONFIG_RPM2CPIO=y
+CONFIG_RPM=y
+CONFIG_FEATURE_RPM_BZ2=y
+CONFIG_TAR=y
+CONFIG_FEATURE_TAR_CREATE=y
+CONFIG_FEATURE_TAR_BZIP2=y
+CONFIG_FEATURE_TAR_LZMA=y
+CONFIG_FEATURE_TAR_FROM=y
+CONFIG_FEATURE_TAR_GZIP=y
+CONFIG_FEATURE_TAR_COMPRESS=y
+CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
+CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY=y
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+CONFIG_FEATURE_TAR_LONG_OPTIONS=y
+CONFIG_UNCOMPRESS=y
+CONFIG_UNLZMA=y
+CONFIG_FEATURE_LZMA_FAST=y
+CONFIG_UNZIP=y
+
+#
+# Common options for cpio and tar
+#
+# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
+
+#
+# Common options for dpkg and dpkg_deb
+#
+CONFIG_FEATURE_DEB_TAR_GZ=y
+CONFIG_FEATURE_DEB_TAR_BZ2=y
+CONFIG_FEATURE_DEB_TAR_LZMA=y
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+CONFIG_CAL=y
+CONFIG_CAT=y
+CONFIG_CATV=y
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+CONFIG_CHROOT=y
+CONFIG_CKSUM=y
+CONFIG_COMM=y
+CONFIG_CP=y
+CONFIG_CUT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+CONFIG_FEATURE_DD_IBS_OBS=y
+CONFIG_DF=y
+CONFIG_DIRNAME=y
+CONFIG_DOS2UNIX=y
+CONFIG_UNIX2DOS=y
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+CONFIG_FEATURE_ENV_LONG_OPTIONS=y
+CONFIG_EXPAND=y
+CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
+CONFIG_EXPR=y
+CONFIG_EXPR_MATH_SUPPORT_64=y
+CONFIG_FALSE=y
+CONFIG_FOLD=y
+CONFIG_HEAD=y
+CONFIG_FEATURE_FANCY_HEAD=y
+CONFIG_HOSTID=y
+CONFIG_ID=y
+CONFIG_INSTALL=y
+CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
+CONFIG_LENGTH=y
+CONFIG_LN=y
+CONFIG_LOGNAME=y
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=y
+CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
+CONFIG_MD5SUM=y
+CONFIG_MKDIR=y
+CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
+CONFIG_MKFIFO=y
+CONFIG_MKNOD=y
+CONFIG_MV=y
+CONFIG_FEATURE_MV_LONG_OPTIONS=y
+CONFIG_NICE=y
+CONFIG_NOHUP=y
+CONFIG_OD=y
+CONFIG_PRINTENV=y
+CONFIG_PRINTF=y
+CONFIG_PWD=y
+CONFIG_READLINK=y
+CONFIG_FEATURE_READLINK_FOLLOW=y
+CONFIG_REALPATH=y
+CONFIG_RM=y
+CONFIG_RMDIR=y
+CONFIG_SEQ=y
+CONFIG_SHA1SUM=y
+CONFIG_SLEEP=y
+CONFIG_FEATURE_FANCY_SLEEP=y
+CONFIG_SORT=y
+CONFIG_FEATURE_SORT_BIG=y
+CONFIG_SPLIT=y
+CONFIG_FEATURE_SPLIT_FANCY=y
+CONFIG_STAT=y
+CONFIG_FEATURE_STAT_FORMAT=y
+CONFIG_STTY=y
+CONFIG_SUM=y
+CONFIG_SYNC=y
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=y
+CONFIG_TEE=y
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+CONFIG_TEST=y
+CONFIG_FEATURE_TEST_64=y
+CONFIG_TOUCH=y
+CONFIG_TR=y
+CONFIG_FEATURE_TR_CLASSES=y
+CONFIG_FEATURE_TR_EQUIV=y
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+CONFIG_UNEXPAND=y
+CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+CONFIG_UUDECODE=y
+CONFIG_UUENCODE=y
+CONFIG_WC=y
+CONFIG_FEATURE_WC_LARGE=y
+CONFIG_WHO=y
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls, more and telnet
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Common options for md5sum, sha1sum
+#
+CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=y
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+CONFIG_DUMPKMAP=y
+CONFIG_KBD_MODE=y
+CONFIG_LOADFONT=y
+CONFIG_LOADKMAP=y
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+CONFIG_RESIZE=y
+CONFIG_FEATURE_RESIZE_PRINT=y
+CONFIG_SETCONSOLE=y
+CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
+CONFIG_SETKEYCODES=y
+CONFIG_SETLOGCONS=y
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+# CONFIG_PIPE_PROGRESS is not set
+CONFIG_RUN_PARTS=y
+CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
+# CONFIG_FEATURE_RUN_PARTS_FANCY is not set
+CONFIG_START_STOP_DAEMON=y
+CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
+CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
+CONFIG_WHICH=y
+
+#
+# Editors
+#
+CONFIG_AWK=y
+CONFIG_FEATURE_AWK_MATH=y
+CONFIG_CMP=y
+CONFIG_DIFF=y
+CONFIG_FEATURE_DIFF_BINARY=y
+CONFIG_FEATURE_DIFF_DIR=y
+CONFIG_FEATURE_DIFF_MINIMAL=y
+CONFIG_ED=y
+CONFIG_PATCH=y
+CONFIG_SED=y
+CONFIG_VI=y
+CONFIG_FEATURE_VI_MAX_LEN=1024
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+CONFIG_FEATURE_ALLOW_EXEC=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_PRINT0=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_MMIN=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+CONFIG_FEATURE_FIND_MAXDEPTH=y
+CONFIG_FEATURE_FIND_NEWER=y
+CONFIG_FEATURE_FIND_INUM=y
+CONFIG_FEATURE_FIND_EXEC=y
+CONFIG_FEATURE_FIND_USER=y
+CONFIG_FEATURE_FIND_GROUP=y
+CONFIG_FEATURE_FIND_NOT=y
+CONFIG_FEATURE_FIND_DEPTH=y
+CONFIG_FEATURE_FIND_PAREN=y
+CONFIG_FEATURE_FIND_SIZE=y
+CONFIG_FEATURE_FIND_PRUNE=y
+CONFIG_FEATURE_FIND_DELETE=y
+CONFIG_FEATURE_FIND_PATH=y
+CONFIG_FEATURE_FIND_REGEX=y
+# CONFIG_FEATURE_FIND_CONTEXT is not set
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+CONFIG_XARGS=y
+CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
+CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+
+#
+# Init Utilities
+#
+CONFIG_INIT=y
+# CONFIG_DEBUG_INIT is not set
+CONFIG_FEATURE_USE_INITTAB=y
+CONFIG_FEATURE_INIT_SCTTY=y
+CONFIG_FEATURE_INIT_SYSLOG=y
+CONFIG_FEATURE_EXTRA_QUIET=y
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+CONFIG_FEATURE_INITRD=y
+CONFIG_HALT=y
+CONFIG_MESG=y
+
+#
+# Login/Password Management Utilities
+#
+CONFIG_FEATURE_SHADOWPASSWDS=y
+# CONFIG_USE_BB_SHADOW is not set
+# CONFIG_USE_BB_PWD_GRP is not set
+CONFIG_ADDGROUP=y
+CONFIG_FEATURE_ADDUSER_TO_GROUP=y
+CONFIG_DELGROUP=y
+CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
+CONFIG_ADDUSER=y
+CONFIG_DELUSER=y
+CONFIG_GETTY=y
+CONFIG_FEATURE_UTMP=y
+CONFIG_FEATURE_WTMP=y
+CONFIG_LOGIN=y
+# CONFIG_PAM is not set
+CONFIG_LOGIN_SCRIPTS=y
+CONFIG_FEATURE_NOLOGIN=y
+CONFIG_FEATURE_SECURETTY=y
+CONFIG_PASSWD=y
+CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
+# CONFIG_CRYPTPW is not set
+# CONFIG_CHPASSWD is not set
+CONFIG_SU=y
+CONFIG_FEATURE_SU_SYSLOG=y
+CONFIG_FEATURE_SU_CHECKS_SHELLS=y
+CONFIG_SULOGIN=y
+CONFIG_VLOCK=y
+
+#
+# Linux Ext2 FS Progs
+#
+CONFIG_CHATTR=y
+CONFIG_FSCK=y
+CONFIG_LSATTR=y
+
+#
+# Linux Module Utilities
+#
+CONFIG_INSMOD=y
+# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
+# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
+# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
+CONFIG_FEATURE_INSMOD_LOAD_MAP=y
+CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL=y
+CONFIG_RMMOD=y
+CONFIG_LSMOD=y
+CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
+CONFIG_MODPROBE=y
+CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y
+CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y
+
+#
+# Options common to multiple modutils
+#
+CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+# CONFIG_FEATURE_2_4_MODULES is not set
+CONFIG_FEATURE_2_6_MODULES=y
+# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
+
+#
+# Linux System Utilities
+#
+CONFIG_DMESG=y
+CONFIG_FEATURE_DMESG_PRETTY=y
+CONFIG_FBSET=y
+CONFIG_FEATURE_FBSET_FANCY=y
+CONFIG_FEATURE_FBSET_READMODE=y
+CONFIG_FDFLUSH=y
+CONFIG_FDFORMAT=y
+CONFIG_FDISK=y
+CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
+CONFIG_FEATURE_FDISK_WRITABLE=y
+# CONFIG_FEATURE_AIX_LABEL is not set
+# CONFIG_FEATURE_SGI_LABEL is not set
+# CONFIG_FEATURE_SUN_LABEL is not set
+# CONFIG_FEATURE_OSF_LABEL is not set
+# CONFIG_FEATURE_FDISK_ADVANCED is not set
+# CONFIG_FREERAMDISK is not set
+# CONFIG_FSCK_MINIX is not set
+# CONFIG_MKFS_MINIX is not set
+# CONFIG_FEATURE_MINIX2 is not set
+CONFIG_GETOPT=y
+CONFIG_HEXDUMP=y
+CONFIG_HWCLOCK=y
+# CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS is not set
+# CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS is not set
+CONFIG_IPCRM=y
+CONFIG_IPCS=y
+CONFIG_LOSETUP=y
+CONFIG_MDEV=y
+CONFIG_FEATURE_MDEV_CONF=y
+CONFIG_FEATURE_MDEV_EXEC=y
+CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
+CONFIG_MKSWAP=y
+# CONFIG_FEATURE_MKSWAP_V0 is not set
+CONFIG_MORE=y
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_MOUNT=y
+CONFIG_FEATURE_MOUNT_HELPERS=y
+CONFIG_FEATURE_MOUNT_NFS=y
+CONFIG_FEATURE_MOUNT_CIFS=y
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
+CONFIG_PIVOT_ROOT=y
+CONFIG_RDATE=y
+CONFIG_READPROFILE=y
+CONFIG_SETARCH=y
+CONFIG_SWAPONOFF=y
+CONFIG_SWITCH_ROOT=y
+CONFIG_UMOUNT=y
+CONFIG_FEATURE_UMOUNT_ALL=y
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+CONFIG_FEATURE_MTAB_SUPPORT=y
+
+#
+# Miscellaneous Utilities
+#
+# CONFIG_ADJTIMEX is not set
+CONFIG_BBCONFIG=y
+CONFIG_CHRT=y
+CONFIG_CROND=y
+CONFIG_DEBUG_CROND_OPTION=y
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+CONFIG_CRONTAB=y
+CONFIG_DC=y
+# CONFIG_DEVFSD is not set
+# CONFIG_DEVFSD_MODLOAD is not set
+# CONFIG_DEVFSD_FG_NP is not set
+# CONFIG_DEVFSD_VERBOSE is not set
+# CONFIG_FEATURE_DEVFS is not set
+# CONFIG_EJECT is not set
+CONFIG_LAST=y
+CONFIG_LESS=y
+CONFIG_FEATURE_LESS_MAXLINES=9999999
+CONFIG_FEATURE_LESS_BRACKETS=y
+CONFIG_FEATURE_LESS_FLAGS=y
+CONFIG_FEATURE_LESS_FLAGCS=y
+CONFIG_FEATURE_LESS_MARKS=y
+CONFIG_FEATURE_LESS_REGEXP=y
+CONFIG_HDPARM=y
+CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
+CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
+CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
+CONFIG_MAKEDEVS=y
+# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
+CONFIG_FEATURE_MAKEDEVS_TABLE=y
+CONFIG_MICROCOM=y
+CONFIG_MOUNTPOINT=y
+CONFIG_MT=y
+# CONFIG_RAIDAUTORUN is not set
+# CONFIG_READAHEAD is not set
+CONFIG_RUNLEVEL=y
+CONFIG_RX=y
+CONFIG_STRINGS=y
+CONFIG_SETSID=y
+# CONFIG_TASKSET is not set
+# CONFIG_FEATURE_TASKSET_FANCY is not set
+CONFIG_TIME=y
+CONFIG_TTYSIZE=y
+CONFIG_WATCHDOG=y
+
+#
+# Networking Utilities
+#
+CONFIG_FEATURE_IPV6=y
+# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
+CONFIG_ARP=y
+CONFIG_ARPING=y
+CONFIG_DNSD=y
+CONFIG_ETHER_WAKE=y
+# CONFIG_FAKEIDENTD is not set
+CONFIG_FTPGET=y
+CONFIG_FTPPUT=y
+CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
+CONFIG_HOSTNAME=y
+CONFIG_HTTPD=y
+CONFIG_FEATURE_HTTPD_RANGES=y
+CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
+CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP=y
+CONFIG_FEATURE_HTTPD_SETUID=y
+CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
+CONFIG_FEATURE_HTTPD_AUTH_MD5=y
+CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES=y
+CONFIG_FEATURE_HTTPD_CGI=y
+CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
+CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
+CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
+CONFIG_FEATURE_HTTPD_ERROR_PAGES=y
+CONFIG_FEATURE_HTTPD_PROXY=y
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+# CONFIG_FEATURE_IFCONFIG_SLIP is not set
+# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
+CONFIG_FEATURE_IFCONFIG_HW=y
+# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
+CONFIG_IFUPDOWN=y
+CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
+# CONFIG_FEATURE_IFUPDOWN_IP is not set
+# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set
+CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN=y
+CONFIG_FEATURE_IFUPDOWN_IPV4=y
+CONFIG_FEATURE_IFUPDOWN_IPV6=y
+# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set
+CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
+CONFIG_INETD=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN=y
+CONFIG_FEATURE_INETD_RPC=y
+# CONFIG_IP is not set
+# CONFIG_FEATURE_IP_ADDRESS is not set
+# CONFIG_FEATURE_IP_LINK is not set
+# CONFIG_FEATURE_IP_ROUTE is not set
+# CONFIG_FEATURE_IP_TUNNEL is not set
+# CONFIG_FEATURE_IP_RULE is not set
+# CONFIG_FEATURE_IP_SHORT_FORMS is not set
+# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
+# CONFIG_IPADDR is not set
+# CONFIG_IPLINK is not set
+# CONFIG_IPROUTE is not set
+# CONFIG_IPTUNNEL is not set
+# CONFIG_IPRULE is not set
+# CONFIG_IPCALC is not set
+# CONFIG_FEATURE_IPCALC_FANCY is not set
+# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set
+# CONFIG_NAMEIF is not set
+# CONFIG_NC is not set
+# CONFIG_NC_SERVER is not set
+# CONFIG_NC_EXTRA is not set
+CONFIG_NETSTAT=y
+CONFIG_FEATURE_NETSTAT_WIDE=y
+CONFIG_NSLOOKUP=y
+CONFIG_PING=y
+CONFIG_PING6=y
+CONFIG_PSCAN=y
+CONFIG_FEATURE_FANCY_PING=y
+CONFIG_ROUTE=y
+# CONFIG_SLATTACH is not set
+CONFIG_TELNET=y
+CONFIG_FEATURE_TELNET_TTYPE=y
+CONFIG_FEATURE_TELNET_AUTOLOGIN=y
+CONFIG_TELNETD=y
+CONFIG_FEATURE_TELNETD_STANDALONE=y
+CONFIG_TFTP=y
+CONFIG_FEATURE_TFTP_GET=y
+CONFIG_FEATURE_TFTP_PUT=y
+CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+# CONFIG_DEBUG_TFTP is not set
+CONFIG_TRACEROUTE=y
+CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
+# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
+# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
+CONFIG_APP_UDHCPD=y
+# CONFIG_APP_DHCPRELAY is not set
+# CONFIG_APP_DUMPLEASES is not set
+# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
+CONFIG_APP_UDHCPC=y
+# CONFIG_FEATURE_UDHCP_DEBUG is not set
+# CONFIG_FEATURE_RFC3397 is not set
+CONFIG_VCONFIG=y
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
+# CONFIG_ZCIP is not set
+
+#
+# Process Utilities
+#
+CONFIG_FREE=y
+CONFIG_FUSER=y
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_KILLALL5=y
+CONFIG_NMETER=y
+CONFIG_PGREP=y
+CONFIG_PIDOF=y
+CONFIG_FEATURE_PIDOF_SINGLE=y
+CONFIG_FEATURE_PIDOF_OMIT=y
+CONFIG_PKILL=y
+CONFIG_PS=y
+CONFIG_FEATURE_PS_WIDE=y
+CONFIG_RENICE=y
+CONFIG_BB_SYSCTL=y
+CONFIG_TOP=y
+CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
+CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
+CONFIG_FEATURE_TOP_DECIMALS=y
+CONFIG_FEATURE_TOPMEM=y
+CONFIG_UPTIME=y
+CONFIG_WATCH=y
+
+#
+# Shells
+#
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_LASH is not set
+# CONFIG_FEATURE_SH_IS_MSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+CONFIG_ASH=y
+
+#
+# Ash Shell Options
+#
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_READ_NCHARS=y
+CONFIG_ASH_READ_TIMEOUT=y
+CONFIG_ASH_ALIAS=y
+CONFIG_ASH_MATH_SUPPORT=y
+CONFIG_ASH_MATH_SUPPORT_64=y
+CONFIG_ASH_GETOPTS=y
+CONFIG_ASH_BUILTIN_ECHO=y
+CONFIG_ASH_BUILTIN_TEST=y
+# CONFIG_ASH_CMDCMD is not set
+# CONFIG_ASH_MAIL is not set
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+# CONFIG_ASH_RANDOM_SUPPORT is not set
+CONFIG_ASH_EXPAND_PRMT=y
+# CONFIG_HUSH is not set
+# CONFIG_HUSH_HELP is not set
+# CONFIG_HUSH_INTERACTIVE is not set
+# CONFIG_HUSH_JOB is not set
+# CONFIG_HUSH_TICK is not set
+# CONFIG_HUSH_IF is not set
+# CONFIG_HUSH_LOOPS is not set
+# CONFIG_LASH is not set
+# CONFIG_MSH is not set
+
+#
+# Bourne Shell Options
+#
+# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
+# CONFIG_FEATURE_SH_STANDALONE is not set
+# CONFIG_CTTYHACK is not set
+
+#
+# System Logging Utilities
+#
+CONFIG_SYSLOGD=y
+CONFIG_FEATURE_ROTATE_LOGFILE=y
+# CONFIG_FEATURE_REMOTE_LOG is not set
+# CONFIG_FEATURE_IPC_SYSLOG is not set
+CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=
+# CONFIG_LOGREAD is not set
+# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
+CONFIG_KLOGD=y
+CONFIG_LOGGER=y
+
+#
+# Runit Utilities
+#
+# CONFIG_RUNSV is not set
+# CONFIG_RUNSVDIR is not set
+# CONFIG_SV is not set
+# CONFIG_SVLOGD is not set
+# CONFIG_CHPST is not set
+# CONFIG_SETUIDGID is not set
+# CONFIG_ENVUIDGID is not set
+# CONFIG_ENVDIR is not set
+# CONFIG_SOFTLIMIT is not set
+# CONFIG_CHCON is not set
+# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
+# CONFIG_GETENFORCE is not set
+# CONFIG_GETSEBOOL is not set
+# CONFIG_LOAD_POLICY is not set
+# CONFIG_MATCHPATHCON is not set
+# CONFIG_RESTORECON is not set
+# CONFIG_RUNCON is not set
+# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
+# CONFIG_SELINUXENABLED is not set
+# CONFIG_SETENFORCE is not set
+# CONFIG_SETFILES is not set
+# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
+# CONFIG_SETSEBOOL is not set
+
+#
+# ipsvd utilities
+#
+# CONFIG_TCPSVD is not set
+# CONFIG_UDPSVD is not set
diff --git a/target/device/Atmel/atngw100-base/busybox-1.9.1.config b/target/device/Atmel/atngw100-base/busybox-1.9.1.config
new file mode 100644
index 000000000..7dd45cd2e
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/busybox-1.9.1.config
@@ -0,0 +1,767 @@
+#
+# Automatically generated make config: don't edit
+# Busybox version: 1.8.2
+# Sun Dec 23 12:11:59 2007
+#
+CONFIG_HAVE_DOT_CONFIG=y
+
+#
+# Busybox Settings
+#
+
+#
+# General Configuration
+#
+# CONFIG_NITPICK is not set
+# CONFIG_DESKTOP is not set
+# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
+# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_SHOW_USAGE=y
+CONFIG_FEATURE_VERBOSE_USAGE=y
+# CONFIG_FEATURE_COMPRESS_USAGE is not set
+# CONFIG_FEATURE_INSTALLER is not set
+# CONFIG_LOCALE_SUPPORT is not set
+CONFIG_GETOPT_LONG=y
+CONFIG_FEATURE_DEVPTS=y
+# CONFIG_FEATURE_CLEAN_UP is not set
+# CONFIG_FEATURE_PIDFILE is not set
+CONFIG_FEATURE_SUID=y
+# CONFIG_FEATURE_SUID_CONFIG is not set
+# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set
+# CONFIG_SELINUX is not set
+# CONFIG_FEATURE_PREFER_APPLETS is not set
+CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
+CONFIG_FEATURE_SYSLOG=y
+CONFIG_FEATURE_HAVE_RPC=y
+
+#
+# Build Options
+#
+CONFIG_STATIC=y
+CONFIG_BUILD_LIBBUSYBOX=y
+# CONFIG_FEATURE_INDIVIDUAL is not set
+# CONFIG_FEATURE_SHARED_BUSYBOX is not set
+CONFIG_LFS=y
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_WERROR is not set
+CONFIG_NO_DEBUG_LIB=y
+# CONFIG_DMALLOC is not set
+# CONFIG_EFENCE is not set
+CONFIG_INCLUDE_SUSv2=y
+
+#
+# Installation Options
+#
+# CONFIG_INSTALL_NO_USR is not set
+CONFIG_INSTALL_APPLET_SYMLINKS=y
+# CONFIG_INSTALL_APPLET_HARDLINKS is not set
+# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
+# CONFIG_INSTALL_APPLET_DONT is not set
+# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
+# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
+# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
+CONFIG_PREFIX="/usr/avr32-linux"
+
+#
+# Busybox Library Tuning
+#
+CONFIG_PASSWORD_MINLEN=6
+CONFIG_MD5_SIZE_VS_SPEED=2
+CONFIG_FEATURE_FAST_TOP=y
+# CONFIG_FEATURE_ETC_NETWORKS is not set
+CONFIG_FEATURE_EDITING=y
+CONFIG_FEATURE_EDITING_MAX_LEN=1024
+CONFIG_FEATURE_EDITING_FANCY_KEYS=y
+# CONFIG_FEATURE_EDITING_VI is not set
+CONFIG_FEATURE_EDITING_HISTORY=100
+CONFIG_FEATURE_EDITING_SAVEHISTORY=y
+CONFIG_FEATURE_TAB_COMPLETION=y
+# CONFIG_FEATURE_USERNAME_COMPLETION is not set
+CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
+CONFIG_MONOTONIC_SYSCALL=y
+CONFIG_IOCTL_HEX2STR_ERROR=y
+
+#
+# Applets
+#
+
+#
+# Archival Utilities
+#
+CONFIG_AR=y
+CONFIG_FEATURE_AR_LONG_FILENAMES=y
+CONFIG_BUNZIP2=y
+CONFIG_BZIP2=y
+CONFIG_CPIO=y
+CONFIG_DPKG=y
+CONFIG_DPKG_DEB=y
+# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
+CONFIG_GUNZIP=y
+CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y
+CONFIG_GZIP=y
+CONFIG_RPM2CPIO=y
+CONFIG_RPM=y
+CONFIG_FEATURE_RPM_BZ2=y
+CONFIG_TAR=y
+CONFIG_FEATURE_TAR_CREATE=y
+CONFIG_FEATURE_TAR_BZIP2=y
+CONFIG_FEATURE_TAR_LZMA=y
+CONFIG_FEATURE_TAR_FROM=y
+CONFIG_FEATURE_TAR_GZIP=y
+CONFIG_FEATURE_TAR_COMPRESS=y
+CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
+CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY=y
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+CONFIG_FEATURE_TAR_LONG_OPTIONS=y
+CONFIG_UNCOMPRESS=y
+CONFIG_UNLZMA=y
+CONFIG_FEATURE_LZMA_FAST=y
+CONFIG_UNZIP=y
+
+#
+# Common options for cpio and tar
+#
+# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
+
+#
+# Common options for dpkg and dpkg_deb
+#
+CONFIG_FEATURE_DEB_TAR_GZ=y
+CONFIG_FEATURE_DEB_TAR_BZ2=y
+CONFIG_FEATURE_DEB_TAR_LZMA=y
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+CONFIG_CAL=y
+CONFIG_CAT=y
+CONFIG_CATV=y
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+CONFIG_CHROOT=y
+CONFIG_CKSUM=y
+CONFIG_COMM=y
+CONFIG_CP=y
+CONFIG_CUT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+CONFIG_FEATURE_DD_IBS_OBS=y
+CONFIG_DF=y
+CONFIG_DIRNAME=y
+CONFIG_DOS2UNIX=y
+CONFIG_UNIX2DOS=y
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+CONFIG_FEATURE_ENV_LONG_OPTIONS=y
+CONFIG_EXPAND=y
+CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
+CONFIG_EXPR=y
+CONFIG_EXPR_MATH_SUPPORT_64=y
+CONFIG_FALSE=y
+CONFIG_FOLD=y
+CONFIG_HEAD=y
+CONFIG_FEATURE_FANCY_HEAD=y
+CONFIG_HOSTID=y
+CONFIG_ID=y
+CONFIG_INSTALL=y
+CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
+CONFIG_LENGTH=y
+CONFIG_LN=y
+CONFIG_LOGNAME=y
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=y
+CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
+CONFIG_MD5SUM=y
+CONFIG_MKDIR=y
+CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
+CONFIG_MKFIFO=y
+CONFIG_MKNOD=y
+CONFIG_MV=y
+CONFIG_FEATURE_MV_LONG_OPTIONS=y
+CONFIG_NICE=y
+CONFIG_NOHUP=y
+CONFIG_OD=y
+CONFIG_PRINTENV=y
+CONFIG_PRINTF=y
+CONFIG_PWD=y
+CONFIG_READLINK=y
+CONFIG_FEATURE_READLINK_FOLLOW=y
+CONFIG_REALPATH=y
+CONFIG_RM=y
+CONFIG_RMDIR=y
+CONFIG_SEQ=y
+CONFIG_SHA1SUM=y
+CONFIG_SLEEP=y
+CONFIG_FEATURE_FANCY_SLEEP=y
+CONFIG_SORT=y
+CONFIG_FEATURE_SORT_BIG=y
+CONFIG_SPLIT=y
+CONFIG_FEATURE_SPLIT_FANCY=y
+CONFIG_STAT=y
+CONFIG_FEATURE_STAT_FORMAT=y
+CONFIG_STTY=y
+CONFIG_SUM=y
+CONFIG_SYNC=y
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=y
+CONFIG_TEE=y
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+CONFIG_TEST=y
+CONFIG_FEATURE_TEST_64=y
+CONFIG_TOUCH=y
+CONFIG_TR=y
+CONFIG_FEATURE_TR_CLASSES=y
+CONFIG_FEATURE_TR_EQUIV=y
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+CONFIG_UNEXPAND=y
+CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+CONFIG_UUDECODE=y
+CONFIG_UUENCODE=y
+CONFIG_WC=y
+CONFIG_FEATURE_WC_LARGE=y
+CONFIG_WHO=y
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls, more and telnet
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Common options for md5sum, sha1sum
+#
+CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=y
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+CONFIG_DUMPKMAP=y
+CONFIG_KBD_MODE=y
+CONFIG_LOADFONT=y
+CONFIG_LOADKMAP=y
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+CONFIG_RESIZE=y
+CONFIG_FEATURE_RESIZE_PRINT=y
+CONFIG_SETCONSOLE=y
+CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
+CONFIG_SETKEYCODES=y
+CONFIG_SETLOGCONS=y
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+# CONFIG_PIPE_PROGRESS is not set
+CONFIG_RUN_PARTS=y
+CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
+# CONFIG_FEATURE_RUN_PARTS_FANCY is not set
+CONFIG_START_STOP_DAEMON=y
+CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
+CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
+CONFIG_WHICH=y
+
+#
+# Editors
+#
+CONFIG_AWK=y
+CONFIG_FEATURE_AWK_MATH=y
+CONFIG_CMP=y
+CONFIG_DIFF=y
+CONFIG_FEATURE_DIFF_BINARY=y
+CONFIG_FEATURE_DIFF_DIR=y
+CONFIG_FEATURE_DIFF_MINIMAL=y
+CONFIG_ED=y
+CONFIG_PATCH=y
+CONFIG_SED=y
+CONFIG_VI=y
+CONFIG_FEATURE_VI_MAX_LEN=1024
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+CONFIG_FEATURE_ALLOW_EXEC=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_PRINT0=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_MMIN=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+CONFIG_FEATURE_FIND_MAXDEPTH=y
+CONFIG_FEATURE_FIND_NEWER=y
+CONFIG_FEATURE_FIND_INUM=y
+CONFIG_FEATURE_FIND_EXEC=y
+CONFIG_FEATURE_FIND_USER=y
+CONFIG_FEATURE_FIND_GROUP=y
+CONFIG_FEATURE_FIND_NOT=y
+CONFIG_FEATURE_FIND_DEPTH=y
+CONFIG_FEATURE_FIND_PAREN=y
+CONFIG_FEATURE_FIND_SIZE=y
+CONFIG_FEATURE_FIND_PRUNE=y
+CONFIG_FEATURE_FIND_DELETE=y
+CONFIG_FEATURE_FIND_PATH=y
+CONFIG_FEATURE_FIND_REGEX=y
+# CONFIG_FEATURE_FIND_CONTEXT is not set
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+CONFIG_XARGS=y
+CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
+CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+
+#
+# Init Utilities
+#
+CONFIG_INIT=y
+# CONFIG_DEBUG_INIT is not set
+CONFIG_FEATURE_USE_INITTAB=y
+CONFIG_FEATURE_INIT_SCTTY=y
+CONFIG_FEATURE_INIT_SYSLOG=y
+CONFIG_FEATURE_EXTRA_QUIET=y
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+CONFIG_FEATURE_INITRD=y
+CONFIG_HALT=y
+CONFIG_MESG=y
+
+#
+# Login/Password Management Utilities
+#
+CONFIG_FEATURE_SHADOWPASSWDS=y
+# CONFIG_USE_BB_SHADOW is not set
+# CONFIG_USE_BB_PWD_GRP is not set
+CONFIG_ADDGROUP=y
+CONFIG_FEATURE_ADDUSER_TO_GROUP=y
+CONFIG_DELGROUP=y
+CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
+CONFIG_ADDUSER=y
+CONFIG_DELUSER=y
+CONFIG_GETTY=y
+CONFIG_FEATURE_UTMP=y
+CONFIG_FEATURE_WTMP=y
+CONFIG_LOGIN=y
+# CONFIG_PAM is not set
+CONFIG_LOGIN_SCRIPTS=y
+CONFIG_FEATURE_NOLOGIN=y
+CONFIG_FEATURE_SECURETTY=y
+CONFIG_PASSWD=y
+CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
+# CONFIG_CRYPTPW is not set
+# CONFIG_CHPASSWD is not set
+CONFIG_SU=y
+CONFIG_FEATURE_SU_SYSLOG=y
+CONFIG_FEATURE_SU_CHECKS_SHELLS=y
+CONFIG_SULOGIN=y
+CONFIG_VLOCK=y
+
+#
+# Linux Ext2 FS Progs
+#
+CONFIG_CHATTR=y
+CONFIG_FSCK=y
+CONFIG_LSATTR=y
+
+#
+# Linux Module Utilities
+#
+CONFIG_INSMOD=y
+# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
+# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
+# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
+CONFIG_FEATURE_INSMOD_LOAD_MAP=y
+CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL=y
+CONFIG_RMMOD=y
+CONFIG_LSMOD=y
+CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
+CONFIG_MODPROBE=y
+CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y
+CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y
+
+#
+# Options common to multiple modutils
+#
+CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+# CONFIG_FEATURE_2_4_MODULES is not set
+CONFIG_FEATURE_2_6_MODULES=y
+# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
+
+#
+# Linux System Utilities
+#
+CONFIG_DMESG=y
+CONFIG_FEATURE_DMESG_PRETTY=y
+CONFIG_FBSET=y
+CONFIG_FEATURE_FBSET_FANCY=y
+CONFIG_FEATURE_FBSET_READMODE=y
+CONFIG_FDFLUSH=y
+CONFIG_FDFORMAT=y
+CONFIG_FDISK=y
+CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
+CONFIG_FEATURE_FDISK_WRITABLE=y
+# CONFIG_FEATURE_AIX_LABEL is not set
+# CONFIG_FEATURE_SGI_LABEL is not set
+# CONFIG_FEATURE_SUN_LABEL is not set
+# CONFIG_FEATURE_OSF_LABEL is not set
+# CONFIG_FEATURE_FDISK_ADVANCED is not set
+# CONFIG_FREERAMDISK is not set
+# CONFIG_FSCK_MINIX is not set
+# CONFIG_MKFS_MINIX is not set
+# CONFIG_FEATURE_MINIX2 is not set
+CONFIG_GETOPT=y
+CONFIG_HEXDUMP=y
+CONFIG_HWCLOCK=y
+# CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS is not set
+# CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS is not set
+CONFIG_IPCRM=y
+CONFIG_IPCS=y
+CONFIG_LOSETUP=y
+CONFIG_MDEV=y
+CONFIG_FEATURE_MDEV_CONF=y
+CONFIG_FEATURE_MDEV_EXEC=y
+CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
+CONFIG_MKSWAP=y
+# CONFIG_FEATURE_MKSWAP_V0 is not set
+CONFIG_MORE=y
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_MOUNT=y
+CONFIG_FEATURE_MOUNT_HELPERS=y
+CONFIG_FEATURE_MOUNT_NFS=y
+CONFIG_FEATURE_MOUNT_CIFS=y
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
+CONFIG_PIVOT_ROOT=y
+CONFIG_RDATE=y
+CONFIG_READPROFILE=y
+CONFIG_SETARCH=y
+CONFIG_SWAPONOFF=y
+CONFIG_SWITCH_ROOT=y
+CONFIG_UMOUNT=y
+CONFIG_FEATURE_UMOUNT_ALL=y
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+CONFIG_FEATURE_MTAB_SUPPORT=y
+
+#
+# Miscellaneous Utilities
+#
+# CONFIG_ADJTIMEX is not set
+CONFIG_BBCONFIG=y
+CONFIG_CHRT=y
+CONFIG_CROND=y
+CONFIG_DEBUG_CROND_OPTION=y
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+CONFIG_CRONTAB=y
+CONFIG_DC=y
+# CONFIG_DEVFSD is not set
+# CONFIG_DEVFSD_MODLOAD is not set
+# CONFIG_DEVFSD_FG_NP is not set
+# CONFIG_DEVFSD_VERBOSE is not set
+# CONFIG_FEATURE_DEVFS is not set
+# CONFIG_EJECT is not set
+CONFIG_LAST=y
+CONFIG_LESS=y
+CONFIG_FEATURE_LESS_MAXLINES=9999999
+CONFIG_FEATURE_LESS_BRACKETS=y
+CONFIG_FEATURE_LESS_FLAGS=y
+CONFIG_FEATURE_LESS_FLAGCS=y
+CONFIG_FEATURE_LESS_MARKS=y
+CONFIG_FEATURE_LESS_REGEXP=y
+CONFIG_HDPARM=y
+CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
+CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
+CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
+CONFIG_MAKEDEVS=y
+# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
+CONFIG_FEATURE_MAKEDEVS_TABLE=y
+CONFIG_MICROCOM=y
+CONFIG_MOUNTPOINT=y
+CONFIG_MT=y
+# CONFIG_RAIDAUTORUN is not set
+# CONFIG_READAHEAD is not set
+CONFIG_RUNLEVEL=y
+CONFIG_RX=y
+CONFIG_STRINGS=y
+CONFIG_SETSID=y
+# CONFIG_TASKSET is not set
+# CONFIG_FEATURE_TASKSET_FANCY is not set
+CONFIG_TIME=y
+CONFIG_TTYSIZE=y
+CONFIG_WATCHDOG=y
+
+#
+# Networking Utilities
+#
+CONFIG_FEATURE_IPV6=y
+# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
+CONFIG_ARP=y
+CONFIG_ARPING=y
+CONFIG_DNSD=y
+CONFIG_ETHER_WAKE=y
+# CONFIG_FAKEIDENTD is not set
+CONFIG_FTPGET=y
+CONFIG_FTPPUT=y
+CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
+CONFIG_HOSTNAME=y
+CONFIG_HTTPD=y
+CONFIG_FEATURE_HTTPD_RANGES=y
+CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
+CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP=y
+CONFIG_FEATURE_HTTPD_SETUID=y
+CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
+CONFIG_FEATURE_HTTPD_AUTH_MD5=y
+CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES=y
+CONFIG_FEATURE_HTTPD_CGI=y
+CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
+CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
+CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
+CONFIG_FEATURE_HTTPD_ERROR_PAGES=y
+CONFIG_FEATURE_HTTPD_PROXY=y
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+# CONFIG_FEATURE_IFCONFIG_SLIP is not set
+# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
+CONFIG_FEATURE_IFCONFIG_HW=y
+# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
+CONFIG_IFUPDOWN=y
+CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
+# CONFIG_FEATURE_IFUPDOWN_IP is not set
+# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set
+CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN=y
+CONFIG_FEATURE_IFUPDOWN_IPV4=y
+CONFIG_FEATURE_IFUPDOWN_IPV6=y
+# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set
+CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
+CONFIG_INETD=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN=y
+CONFIG_FEATURE_INETD_RPC=y
+# CONFIG_IP is not set
+# CONFIG_FEATURE_IP_ADDRESS is not set
+# CONFIG_FEATURE_IP_LINK is not set
+# CONFIG_FEATURE_IP_ROUTE is not set
+# CONFIG_FEATURE_IP_TUNNEL is not set
+# CONFIG_FEATURE_IP_RULE is not set
+# CONFIG_FEATURE_IP_SHORT_FORMS is not set
+# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
+# CONFIG_IPADDR is not set
+# CONFIG_IPLINK is not set
+# CONFIG_IPROUTE is not set
+# CONFIG_IPTUNNEL is not set
+# CONFIG_IPRULE is not set
+# CONFIG_IPCALC is not set
+# CONFIG_FEATURE_IPCALC_FANCY is not set
+# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set
+# CONFIG_NAMEIF is not set
+# CONFIG_NC is not set
+# CONFIG_NC_SERVER is not set
+# CONFIG_NC_EXTRA is not set
+CONFIG_NETSTAT=y
+CONFIG_FEATURE_NETSTAT_WIDE=y
+CONFIG_NSLOOKUP=y
+CONFIG_PING=y
+CONFIG_PING6=y
+CONFIG_PSCAN=y
+CONFIG_FEATURE_FANCY_PING=y
+CONFIG_ROUTE=y
+# CONFIG_SLATTACH is not set
+CONFIG_TELNET=y
+CONFIG_FEATURE_TELNET_TTYPE=y
+CONFIG_FEATURE_TELNET_AUTOLOGIN=y
+CONFIG_TELNETD=y
+CONFIG_FEATURE_TELNETD_STANDALONE=y
+CONFIG_TFTP=y
+CONFIG_FEATURE_TFTP_GET=y
+CONFIG_FEATURE_TFTP_PUT=y
+CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+# CONFIG_DEBUG_TFTP is not set
+CONFIG_TRACEROUTE=y
+CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
+# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
+# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
+CONFIG_APP_UDHCPD=y
+# CONFIG_APP_DHCPRELAY is not set
+# CONFIG_APP_DUMPLEASES is not set
+# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
+CONFIG_APP_UDHCPC=y
+# CONFIG_FEATURE_UDHCP_DEBUG is not set
+# CONFIG_FEATURE_RFC3397 is not set
+CONFIG_VCONFIG=y
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
+# CONFIG_ZCIP is not set
+
+#
+# Process Utilities
+#
+CONFIG_FREE=y
+CONFIG_FUSER=y
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_KILLALL5=y
+CONFIG_NMETER=y
+CONFIG_PGREP=y
+CONFIG_PIDOF=y
+CONFIG_FEATURE_PIDOF_SINGLE=y
+CONFIG_FEATURE_PIDOF_OMIT=y
+CONFIG_PKILL=y
+CONFIG_PS=y
+CONFIG_FEATURE_PS_WIDE=y
+CONFIG_RENICE=y
+CONFIG_BB_SYSCTL=y
+CONFIG_TOP=y
+CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
+CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
+CONFIG_FEATURE_TOP_DECIMALS=y
+CONFIG_FEATURE_TOPMEM=y
+CONFIG_UPTIME=y
+CONFIG_WATCH=y
+
+#
+# Shells
+#
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_LASH is not set
+# CONFIG_FEATURE_SH_IS_MSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+CONFIG_ASH=y
+
+#
+# Ash Shell Options
+#
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_READ_NCHARS=y
+CONFIG_ASH_READ_TIMEOUT=y
+CONFIG_ASH_ALIAS=y
+CONFIG_ASH_MATH_SUPPORT=y
+CONFIG_ASH_MATH_SUPPORT_64=y
+CONFIG_ASH_GETOPTS=y
+CONFIG_ASH_BUILTIN_ECHO=y
+CONFIG_ASH_BUILTIN_TEST=y
+# CONFIG_ASH_CMDCMD is not set
+# CONFIG_ASH_MAIL is not set
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+# CONFIG_ASH_RANDOM_SUPPORT is not set
+CONFIG_ASH_EXPAND_PRMT=y
+# CONFIG_HUSH is not set
+# CONFIG_HUSH_HELP is not set
+# CONFIG_HUSH_INTERACTIVE is not set
+# CONFIG_HUSH_JOB is not set
+# CONFIG_HUSH_TICK is not set
+# CONFIG_HUSH_IF is not set
+# CONFIG_HUSH_LOOPS is not set
+# CONFIG_LASH is not set
+# CONFIG_MSH is not set
+
+#
+# Bourne Shell Options
+#
+# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
+# CONFIG_FEATURE_SH_STANDALONE is not set
+# CONFIG_CTTYHACK is not set
+
+#
+# System Logging Utilities
+#
+CONFIG_SYSLOGD=y
+CONFIG_FEATURE_ROTATE_LOGFILE=y
+# CONFIG_FEATURE_REMOTE_LOG is not set
+# CONFIG_FEATURE_IPC_SYSLOG is not set
+CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=
+# CONFIG_LOGREAD is not set
+# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
+CONFIG_KLOGD=y
+CONFIG_LOGGER=y
+
+#
+# Runit Utilities
+#
+# CONFIG_RUNSV is not set
+# CONFIG_RUNSVDIR is not set
+# CONFIG_SV is not set
+# CONFIG_SVLOGD is not set
+# CONFIG_CHPST is not set
+# CONFIG_SETUIDGID is not set
+# CONFIG_ENVUIDGID is not set
+# CONFIG_ENVDIR is not set
+# CONFIG_SOFTLIMIT is not set
+# CONFIG_CHCON is not set
+# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
+# CONFIG_GETENFORCE is not set
+# CONFIG_GETSEBOOL is not set
+# CONFIG_LOAD_POLICY is not set
+# CONFIG_MATCHPATHCON is not set
+# CONFIG_RESTORECON is not set
+# CONFIG_RUNCON is not set
+# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
+# CONFIG_SELINUXENABLED is not set
+# CONFIG_SETENFORCE is not set
+# CONFIG_SETFILES is not set
+# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
+# CONFIG_SETSEBOOL is not set
+
+#
+# ipsvd utilities
+#
+# CONFIG_TCPSVD is not set
+# CONFIG_UDPSVD is not set
diff --git a/target/device/Atmel/atngw100-base/device_table.txt b/target/device/Atmel/atngw100-base/device_table.txt
new file mode 100644
index 000000000..56616edd6
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/device_table.txt
@@ -0,0 +1,56 @@
+# When building a target filesystem, it is desirable to not have to become
+# root and then run 'mknod' a thousand times. Using a device table you can
+# create device nodes and directories "on the fly".
+#
+# This is a sample device table file for use with genext2fs. You can do all
+# sorts of interesting things with a device table file.  For example, if you
+# want to adjust the permissions on a particular file you can just add an
+# entry like:
+#   /sbin/foobar        f       2755    0       0       -       -       -       -       -
+# and (assuming the file /sbin/foobar exists) it will be made setuid root
+# (regardless of what its permissions are on the host filesystem.
+# Furthermore, you can use a single table entry to create a many device
+# minors. For example, if I wanted to create /dev/hda and /dev/hda[0-15] I
+# could just use the following two table entries:
+#   /dev/hda    b       640     0       0       3       0       0       0       -
+#   /dev/hda    b       640     0       0       3       1       1       1       15
+#
+# Device table entries take the form of:
+# <name>    <type>      <mode>  <uid>   <gid>   <major> <minor> <start> <inc>   <count>
+# where name is the file name,  type can be one of:
+#       f       A regular file
+#       d       Directory
+#       c       Character special device file
+#       b       Block special device file
+#       p       Fifo (named pipe)
+# uid is the user id for the target file, gid is the group id for the target
+# file.  The rest of the entries (major, minor, etc) apply only to device
+# special files.
+
+#<name>		<type>	<mode>	<uid>	<gid>	<major>	<minor>	<start>	<inc>	<count>
+/dev		d	755	0	0	-	-	-	-	-
+/dev/null	c	666	0	0	1	3	0	0	-
+/dev/console	c	666	0	0	5	1	-	-	-
+
+/tmp		d	1777	0	0	-	-	-	-	-
+/etc		d	755	0	0	-	-	-	-	-
+/sys		d	755	0	0	-	-	-	-	-
+/config		d	755	0	0	-	-	-	-	-
+/proc		d	755	0	0	-	-	-	-	-
+/lost+found	d	700	0	0	-	-	-	-	-
+/var/lock	d	1777	0	0	-	-	-	-	-
+/var/log	d	755	0	0	-	-	-	-	-
+/var/run	d	1777	0	0	-	-	-	-	-
+/var/tmp	d	1777	0	0	-	-	-	-	-
+/home/default	d	2755	1000	1000	-	-	-	-	-
+/media		d	755	0	0	-	-	-	-	-
+/www		d	755	0	0	-	-	-	-	-
+
+#<name>					<type>	<mode>	<uid>	<gid>	<major>	<minor>	<start>	<inc>	<count>
+/bin/busybox				f	4755	0	0	-	-	-	-	-
+/etc/shadow				f	600	0	0	-	-	-	-	-
+/etc/passwd				f	644	0	0	-	-	-	-	-
+/etc/network/if-up.d			d	755	0	0	-	-	-	-	-
+/etc/network/if-pre-up.d		d	755	0	0	-	-	-	-	-
+/etc/network/if-down.d			d	755	0	0	-	-	-	-	-
+/etc/network/if-post-down.d		d	755	0	0	-	-	-	-	-
diff --git a/target/device/Atmel/atngw100-base/kernel-patches/linux-2.6.23-100-avr32-atmel.2.patch b/target/device/Atmel/atngw100-base/kernel-patches/linux-2.6.23-100-avr32-atmel.2.patch
new file mode 100644
index 000000000..1f0a5f542
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/kernel-patches/linux-2.6.23-100-avr32-atmel.2.patch
@@ -0,0 +1,19857 @@
+ MAINTAINERS                                |    7 +
+ Makefile                                   |    2 +-
+ arch/avr32/Kconfig                         |   34 +-
+ arch/avr32/Makefile                        |    3 +-
+ arch/avr32/boards/atngw100/Kconfig         |   12 +
+ arch/avr32/boards/atngw100/flash.c         |    5 +-
+ arch/avr32/boards/atngw100/setup.c         |   26 +-
+ arch/avr32/boards/atstk1000/Kconfig        |   82 +-
+ arch/avr32/boards/atstk1000/Makefile       |    2 +
+ arch/avr32/boards/atstk1000/atstk1000.h    |    2 +
+ arch/avr32/boards/atstk1000/atstk1002.c    |  148 ++-
+ arch/avr32/boards/atstk1000/atstk1003.c    |  181 +++
+ arch/avr32/boards/atstk1000/atstk1004.c    |  152 +++
+ arch/avr32/boards/atstk1000/flash.c        |    5 +-
+ arch/avr32/boards/atstk1000/setup.c        |   64 +
+ arch/avr32/configs/atngw100_defconfig      |  210 +++-
+ arch/avr32/configs/atstk1002_defconfig     |  482 +++++--
+ arch/avr32/configs/atstk1003_defconfig     | 1045 ++++++++++++++
+ arch/avr32/configs/atstk1004_defconfig     |  722 ++++++++++
+ arch/avr32/drivers/Makefile                |    1 +
+ arch/avr32/drivers/dw-dmac.c               |  761 +++++++++++
+ arch/avr32/drivers/dw-dmac.h               |   42 +
+ arch/avr32/kernel/Makefile                 |    6 +-
+ arch/avr32/kernel/dma-controller.c         |   34 +
+ arch/avr32/kernel/entry-avr32b.S           |   26 +-
+ arch/avr32/kernel/setup.c                  |    2 +-
+ arch/avr32/kernel/vmlinux.lds.S            |  143 ++
+ arch/avr32/kernel/vmlinux.lds.c            |  142 --
+ arch/avr32/mach-at32ap/Kconfig             |   19 +-
+ arch/avr32/mach-at32ap/Makefile            |    5 +-
+ arch/avr32/mach-at32ap/at32ap7000.c        | 1324 ------------------
+ arch/avr32/mach-at32ap/at32ap700x.c        | 1754 ++++++++++++++++++++++++
+ arch/avr32/mach-at32ap/clock.c             |  116 ++
+ arch/avr32/mach-at32ap/gpio-dev.c          |  573 ++++++++
+ arch/avr32/mach-at32ap/hsmc.c              |  129 ++-
+ arch/avr32/mach-at32ap/pio.c               |   80 ++
+ arch/avr32/mach-at32ap/pm.h                |    8 +
+ arch/avr32/mm/dma-coherent.c               |    7 +
+ arch/avr32/mm/init.c                       |   12 +-
+ drivers/char/watchdog/Kconfig              |    2 +-
+ drivers/char/watchdog/at32ap700x_wdt.c     |   69 +-
+ drivers/i2c/busses/Kconfig                 |    8 +
+ drivers/i2c/busses/Makefile                |    1 +
+ drivers/i2c/busses/i2c-atmeltwi.c          |  436 ++++++
+ drivers/i2c/busses/i2c-atmeltwi.h          |  117 ++
+ drivers/misc/Kconfig                       |    9 +
+ drivers/misc/Makefile                      |    1 +
+ drivers/misc/atmel-ssc.c                   |  174 +++
+ drivers/mmc/host/Kconfig                   |   10 +
+ drivers/mmc/host/Makefile                  |    1 +
+ drivers/mmc/host/atmel-mci.c               | 1176 ++++++++++++++++
+ drivers/mmc/host/atmel-mci.h               |  192 +++
+ drivers/mtd/chips/cfi_cmdset_0001.c        |   43 +
+ drivers/mtd/chips/cfi_cmdset_0002.c        |    6 +-
+ drivers/pcmcia/Kconfig                     |    7 +
+ drivers/pcmcia/Makefile                    |    1 +
+ drivers/pcmcia/at32_cf.c                   |  531 ++++++++
+ drivers/pcmcia/cistpl.c                    |   48 +-
+ drivers/spi/atmel_spi.c                    |    4 +-
+ drivers/usb/gadget/Kconfig                 |   26 +-
+ drivers/usb/gadget/Makefile                |    1 +
+ drivers/usb/gadget/atmel_usba_udc.c        | 2038 ++++++++++++++++++++++++++++
+ drivers/usb/gadget/atmel_usba_udc.h        |  350 +++++
+ drivers/video/atmel_lcdfb.c                |    6 +-
+ drivers/video/backlight/Kconfig            |   12 +
+ drivers/video/backlight/Makefile           |    2 +
+ drivers/video/backlight/ltv350qv.c         |  339 +++++
+ drivers/video/backlight/ltv350qv.h         |   95 ++
+ include/asm-avr32/arch-at32ap/at32ap7000.h |   35 -
+ include/asm-avr32/arch-at32ap/at32ap700x.h |   35 +
+ include/asm-avr32/arch-at32ap/board.h      |   39 +
+ include/asm-avr32/arch-at32ap/cpu.h        |    2 +-
+ include/asm-avr32/arch-at32ap/io.h         |    4 +-
+ include/asm-avr32/arch-at32ap/portmux.h    |   13 +
+ include/asm-avr32/arch-at32ap/smc.h        |   51 +-
+ include/asm-avr32/dma-controller.h         |  166 +++
+ include/asm-avr32/dma-mapping.h            |   17 +-
+ include/asm-avr32/system.h                 |   13 +-
+ include/asm-avr32/unistd.h                 |   13 +
+ include/linux/atmel-ssc.h                  |  312 +++++
+ include/linux/spi/at73c213.h               |   25 +
+ include/pcmcia/cs_types.h                  |    2 +-
+ init/do_mounts.c                           |    8 +-
+ scripts/checkstack.pl                      |    5 +
+ sound/Kconfig                              |    6 +
+ sound/Makefile                             |    3 +-
+ sound/avr32/Kconfig                        |   11 +
+ sound/avr32/Makefile                       |    3 +
+ sound/avr32/ac97c.c                        |  914 +++++++++++++
+ sound/avr32/ac97c.h                        |   71 +
+ sound/oss/Kconfig                          |    4 +
+ sound/oss/Makefile                         |    1 +
+ sound/oss/at32_abdac.c                     |  722 ++++++++++
+ sound/oss/at32_abdac.h                     |   59 +
+ sound/spi/Kconfig                          |   31 +
+ sound/spi/Makefile                         |    5 +
+ sound/spi/at73c213.c                       | 1121 +++++++++++++++
+ sound/spi/at73c213.h                       |  119 ++
+ 98 files changed, 16057 insertions(+), 1826 deletions(-)
+ create mode 100644 arch/avr32/boards/atngw100/Kconfig
+ create mode 100644 arch/avr32/boards/atstk1000/atstk1003.c
+ create mode 100644 arch/avr32/boards/atstk1000/atstk1004.c
+ create mode 100644 arch/avr32/configs/atstk1003_defconfig
+ create mode 100644 arch/avr32/configs/atstk1004_defconfig
+ create mode 100644 arch/avr32/drivers/Makefile
+ create mode 100644 arch/avr32/drivers/dw-dmac.c
+ create mode 100644 arch/avr32/drivers/dw-dmac.h
+ create mode 100644 arch/avr32/kernel/dma-controller.c
+ create mode 100644 arch/avr32/kernel/vmlinux.lds.S
+ delete mode 100644 arch/avr32/kernel/vmlinux.lds.c
+ delete mode 100644 arch/avr32/mach-at32ap/at32ap7000.c
+ create mode 100644 arch/avr32/mach-at32ap/at32ap700x.c
+ create mode 100644 arch/avr32/mach-at32ap/gpio-dev.c
+ create mode 100644 drivers/i2c/busses/i2c-atmeltwi.c
+ create mode 100644 drivers/i2c/busses/i2c-atmeltwi.h
+ create mode 100644 drivers/misc/atmel-ssc.c
+ create mode 100644 drivers/mmc/host/atmel-mci.c
+ create mode 100644 drivers/mmc/host/atmel-mci.h
+ create mode 100644 drivers/pcmcia/at32_cf.c
+ create mode 100644 drivers/usb/gadget/atmel_usba_udc.c
+ create mode 100644 drivers/usb/gadget/atmel_usba_udc.h
+ create mode 100644 drivers/video/backlight/ltv350qv.c
+ create mode 100644 drivers/video/backlight/ltv350qv.h
+ delete mode 100644 include/asm-avr32/arch-at32ap/at32ap7000.h
+ create mode 100644 include/asm-avr32/arch-at32ap/at32ap700x.h
+ create mode 100644 include/asm-avr32/dma-controller.h
+ create mode 100644 include/linux/atmel-ssc.h
+ create mode 100644 include/linux/spi/at73c213.h
+ create mode 100644 sound/avr32/Kconfig
+ create mode 100644 sound/avr32/Makefile
+ create mode 100644 sound/avr32/ac97c.c
+ create mode 100644 sound/avr32/ac97c.h
+ create mode 100644 sound/oss/at32_abdac.c
+ create mode 100644 sound/oss/at32_abdac.h
+ create mode 100644 sound/spi/Kconfig
+ create mode 100644 sound/spi/Makefile
+ create mode 100644 sound/spi/at73c213.c
+ create mode 100644 sound/spi/at73c213.h
+
+diff --git a/MAINTAINERS b/MAINTAINERS
+index 9a91d9e..587afe3 100644
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -669,6 +669,13 @@ P:	Haavard Skinnemoen
+ M:	hskinnemoen@atmel.com
+ S:	Supported
+ 
++ATMEL USBA UDC DRIVER
++P:	Haavard Skinnemoen
++M:	hskinnemoen@atmel.com
++L:	kernel@avr32linux.org
++W:	http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
++S:	Supported
++
+ ATMEL WIRELESS DRIVER
+ P:	Simon Kelley
+ M:	simon@thekelleys.org.uk
+diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
+index d12346a..62913a4 100644
+--- a/arch/avr32/Kconfig
++++ b/arch/avr32/Kconfig
+@@ -87,19 +87,36 @@ config PLATFORM_AT32AP
+ 	select MMU
+ 	select PERFORMANCE_COUNTERS
+ 
++config CPU_AT32AP700X
++	bool
++	select PLATFORM_AT32AP
++
+ choice
+ 	prompt "AVR32 CPU type"
+ 	default CPU_AT32AP7000
+ 
+ config CPU_AT32AP7000
+ 	bool "AT32AP7000"
+-	select PLATFORM_AT32AP
++	select CPU_AT32AP700X
++
++config CPU_AT32AP7001
++	bool "AT32AP7001"
++	select CPU_AT32AP700X
++
++config CPU_AT32AP7002
++	bool "AT32AP7002"
++	select CPU_AT32AP700X
++
+ endchoice
+ 
+ #
+ # CPU Daughterboards for ATSTK1000
+ config BOARD_ATSTK1002
+ 	bool
++config BOARD_ATSTK1003
++	bool
++config BOARD_ATSTK1004
++	bool
+ 
+ choice
+ 	prompt "AVR32 board type"
+@@ -108,6 +125,8 @@ choice
+ config BOARD_ATSTK1000
+ 	bool "ATSTK1000 evaluation board"
+ 	select BOARD_ATSTK1002 if CPU_AT32AP7000
++	select BOARD_ATSTK1003 if CPU_AT32AP7001
++	select BOARD_ATSTK1004 if CPU_AT32AP7002
+ 
+ config BOARD_ATNGW100
+ 	bool "ATNGW100 Network Gateway"
+@@ -116,6 +135,9 @@ endchoice
+ if BOARD_ATSTK1000
+ source "arch/avr32/boards/atstk1000/Kconfig"
+ endif
++if BOARD_ATNGW100
++source "arch/avr32/boards/atngw100/Kconfig"
++endif
+ 
+ choice
+ 	prompt "Boot loader type"
+@@ -129,15 +151,15 @@ source "arch/avr32/mach-at32ap/Kconfig"
+ 
+ config LOAD_ADDRESS
+ 	hex
+-	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
++	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
+ 
+ config ENTRY_ADDRESS
+ 	hex
+-	default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
++	default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
+ 
+ config PHYS_OFFSET
+ 	hex
+-	default 0x10000000 if CPU_AT32AP7000=y
++	default 0x10000000 if CPU_AT32AP700X=y
+ 
+ source "kernel/Kconfig.preempt"
+ 
+@@ -175,6 +197,10 @@ config OWNERSHIP_TRACE
+ 	  enabling Nexus-compliant debuggers to keep track of the PID of the
+ 	  currently executing task.
+ 
++config DW_DMAC
++	tristate "Synopsys DesignWare DMA Controller support"
++	default y if CPU_AT32AP7000
++
+ # FPU emulation goes here
+ 
+ source "kernel/Kconfig.hz"
+diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
+index dc6bc01..96f0030 100644
+--- a/arch/avr32/Makefile
++++ b/arch/avr32/Makefile
+@@ -16,7 +16,7 @@ AFLAGS		+= -mrelax -mno-pic
+ CFLAGS_MODULE	+= -mno-relax
+ LDFLAGS_vmlinux	+= --relax
+ 
+-cpuflags-$(CONFIG_CPU_AT32AP7000)	+= -mcpu=ap7000
++cpuflags-$(CONFIG_PLATFORM_AT32AP)	+= -march=ap
+ 
+ CFLAGS		+= $(cpuflags-y)
+ AFLAGS		+= $(cpuflags-y)
+@@ -31,6 +31,7 @@ core-$(CONFIG_BOARD_ATNGW100)		+= arch/avr32/boards/atngw100/
+ core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
+ core-y					+= arch/avr32/kernel/
+ core-y					+= arch/avr32/mm/
++drivers-y				+= arch/avr32/drivers/
+ libs-y					+= arch/avr32/lib/
+ 
+ archincdir-$(CONFIG_PLATFORM_AT32AP)	:= arch-at32ap
+diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig
+new file mode 100644
+index 0000000..5d922df
+--- /dev/null
++++ b/arch/avr32/boards/atngw100/Kconfig
+@@ -0,0 +1,12 @@
++# NGW100 customization
++
++config BOARD_ATNGW100_I2C_GPIO
++	bool "Use GPIO for i2c instead of built-in TWI module"
++	help
++	  The driver for the built-in TWI module has been plagued by
++	  various problems, while the i2c-gpio driver is based on the
++	  trusty old i2c-algo-bit bitbanging engine, making it work
++	  on pretty much any setup.
++
++	  Choose 'Y' here if you're having i2c-related problems and
++	  want to rule out the i2c bus driver.
+diff --git a/arch/avr32/boards/atngw100/flash.c b/arch/avr32/boards/atngw100/flash.c
+index f9b32a8..b07ae63 100644
+--- a/arch/avr32/boards/atngw100/flash.c
++++ b/arch/avr32/boards/atngw100/flash.c
+@@ -15,7 +15,7 @@
+ 
+ #include <asm/arch/smc.h>
+ 
+-static struct smc_config flash_config __initdata = {
++static struct smc_timing flash_timing __initdata = {
+ 	.ncs_read_setup		= 0,
+ 	.nrd_setup		= 40,
+ 	.ncs_write_setup	= 0,
+@@ -28,7 +28,9 @@ static struct smc_config flash_config __initdata = {
+ 
+ 	.read_cycle		= 120,
+ 	.write_cycle		= 120,
++};
+ 
++static struct smc_config flash_config __initdata = {
+ 	.bus_width		= 2,
+ 	.nrd_controlled		= 1,
+ 	.nwe_controlled		= 1,
+@@ -82,6 +84,7 @@ static int __init atngw100_flash_init(void)
+ {
+ 	int ret;
+ 
++	smc_set_timing(&flash_config, &flash_timing);
+ 	ret = smc_set_configuration(0, &flash_config);
+ 	if (ret < 0) {
+ 		printk(KERN_ERR "atngw100: failed to set NOR flash timing\n");
+diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
+index ef80156..2a5f587 100644
+--- a/arch/avr32/boards/atngw100/setup.c
++++ b/arch/avr32/boards/atngw100/setup.c
+@@ -42,6 +42,11 @@ static struct spi_board_info spi0_board_info[] __initdata = {
+ 	},
+ };
+ 
++static struct mci_platform_data __initdata mci0_data = {
++	.detect_pin	= GPIO_PIN_PC(25),
++	.wp_pin		= GPIO_PIN_PE(0),
++};
++
+ /*
+  * The next two functions should go away as the boot loader is
+  * supposed to initialize the macb address registers with a valid
+@@ -124,9 +129,13 @@ static struct platform_device ngw_gpio_leds = {
+ 	}
+ };
+ 
++#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
+ static struct i2c_gpio_platform_data i2c_gpio_data = {
+-	.sda_pin	= GPIO_PIN_PA(6),
+-	.scl_pin	= GPIO_PIN_PA(7),
++	.sda_pin		= GPIO_PIN_PA(6),
++	.scl_pin		= GPIO_PIN_PA(7),
++	.sda_is_open_drain	= 1,
++	.scl_is_open_drain	= 1,
++	.udelay			= 2,	/* close to 100 kHz */
+ };
+ 
+ static struct platform_device i2c_gpio_device = {
+@@ -136,6 +145,7 @@ static struct platform_device i2c_gpio_device = {
+ 		.platform_data	= &i2c_gpio_data,
+ 	},
+ };
++#endif
+ 
+ static int __init atngw100_init(void)
+ {
+@@ -154,6 +164,8 @@ static int __init atngw100_init(void)
+ 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
+ 
+ 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++	at32_add_device_mci(0, &mci0_data);
++	at32_add_device_usba(0, NULL);
+ 
+ 	for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
+ 		at32_select_gpio(ngw_leds[i].gpio,
+@@ -161,9 +173,15 @@ static int __init atngw100_init(void)
+ 	}
+ 	platform_device_register(&ngw_gpio_leds);
+ 
+-	at32_select_gpio(i2c_gpio_data.sda_pin, 0);
+-	at32_select_gpio(i2c_gpio_data.scl_pin, 0);
++#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
++	at32_select_gpio(i2c_gpio_data.sda_pin,
++		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
++	at32_select_gpio(i2c_gpio_data.scl_pin,
++		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ 	platform_device_register(&i2c_gpio_device);
++#else
++	at32_add_device_twi(0);
++#endif
+ 
+ 	return 0;
+ }
+diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
+index 718578f..aac73a6 100644
+--- a/arch/avr32/boards/atstk1000/Kconfig
++++ b/arch/avr32/boards/atstk1000/Kconfig
+@@ -1,34 +1,34 @@
+ # STK1000 customization
+ 
+-if BOARD_ATSTK1002
++if BOARD_ATSTK1000
+ 
+-config BOARD_ATSTK1002_CUSTOM
+-	bool "Non-default STK-1002 jumper settings"
++config BOARD_ATSTK100X_CUSTOM
++	bool "Non-default STK1002/STK1003/STK1004 jumper settings"
+ 	help
+ 	  You will normally leave the jumpers on the CPU card at their
+ 	  default settings.  If you need to use certain peripherals,
+ 	  you will need to change some of those jumpers.
+ 
+-if BOARD_ATSTK1002_CUSTOM
++if BOARD_ATSTK100X_CUSTOM
+ 
+-config BOARD_ATSTK1002_SW1_CUSTOM
++config BOARD_ATSTK100X_SW1_CUSTOM
+ 	bool "SW1: use SSC1 (not SPI0)"
+ 	help
+ 	  This also prevents using the external DAC as an audio interface,
+ 	  and means you can't initialize the on-board QVGA display.
+ 
+-config BOARD_ATSTK1002_SW2_CUSTOM
++config BOARD_ATSTK100X_SW2_CUSTOM
+ 	bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
+ 	help
+ 	  If you change this you'll want an updated boot loader putting
+ 	  the console on UART-C not UART-A.
+ 
+-config BOARD_ATSTK1002_SW3_CUSTOM
++config BOARD_ATSTK100X_SW3_CUSTOM
+ 	bool "SW3: use TIMER1 (not SSC0 and GCLK)"
+ 	help
+ 	  This also prevents using the external DAC as an audio interface.
+ 
+-config BOARD_ATSTK1002_SW4_CUSTOM
++config BOARD_ATSTK100X_SW4_CUSTOM
+ 	bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
+ 	help
+ 	  To use the camera interface you'll need a custom card (on the
+@@ -36,27 +36,29 @@ config BOARD_ATSTK1002_SW4_CUSTOM
+ 
+ config BOARD_ATSTK1002_SW5_CUSTOM
+ 	bool "SW5: use MACB1 (not LCDC)"
++	depends on BOARD_ATSTK1002
+ 
+ config BOARD_ATSTK1002_SW6_CUSTOM
+ 	bool "SW6: more GPIOs (not MACB0)"
++	depends on BOARD_ATSTK1002
+ 
+ endif	# custom
+ 
+-config BOARD_ATSTK1002_SPI1
++config BOARD_ATSTK100X_SPI1
+ 	bool "Configure SPI1 controller"
+-	depends on !BOARD_ATSTK1002_SW4_CUSTOM
++	depends on !BOARD_ATSTK100X_SW4_CUSTOM
+ 	help
+ 	  All the signals for the second SPI controller are available on
+ 	  GPIO lines and accessed through the J1 jumper block.  Say "y"
+ 	  here to configure that SPI controller.
+ 
+-config BOARD_ATSTK1002_J2_LED
++config BOARD_ATSTK1000_J2_LED
+ 	bool
+-	default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
++	default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB
+ 
+ choice
+ 	prompt "LEDs connected to J2:"
+-	depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM
++	depends on LEDS_GPIO && !BOARD_ATSTK100X_SW4_CUSTOM
+ 	optional
+ 	help
+ 	  Select this if you have jumpered the J2 jumper block to the
+@@ -64,16 +66,64 @@ choice
+ 	  IDC cable.  A default "heartbeat" trigger is provided, but
+ 	  you can of course override this.
+ 
+-config BOARD_ATSTK1002_J2_LED8
++config BOARD_ATSTK1000_J2_LED8
+ 	bool "LED0..LED7"
+ 	help
+ 	  Select this if J2 is jumpered to LED0..LED7 amber leds.
+ 
+-config BOARD_ATSTK1002_J2_RGB
++config BOARD_ATSTK1000_J2_RGB
+ 	bool "RGB leds"
+ 	help
+ 	  Select this if J2 is jumpered to the RGB leds.
+ 
+ endchoice
+ 
+-endif	# stk 1002
++config BOARD_ATSTK1000_EXTDAC
++	bool
++	depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
++	default y
++
++config BOARD_ATSTK100X_ENABLE_AC97
++	bool "Use AC97C instead of ABDAC"
++	help
++	  Select this if you want to use the built-in AC97 controller
++	  instead of the built-in Audio Bitstream DAC. These share
++	  the same I/O pins on the AP7000, so both can't be enabled
++	  at the same time.
++
++	  Note that the STK1000 kit doesn't ship with an AC97 codec on
++	  board, so say N unless you've got an expansion board with an
++	  AC97 codec on it that you want to use.
++
++config BOARD_ATSTK1000_CF_HACKS
++	bool "ATSTK1000 CompactFlash hacks"
++	depends on !BOARD_ATSTK100X_SW4_CUSTOM
++	help
++	  Select this if you have re-routed the CompactFlash RESET and
++	  CD signals to GPIOs on your STK1000. This is necessary for
++	  reset and card detection to work properly, although some CF
++	  cards may be able to cope without reset.
++
++config BOARD_ATSTK1000_CF_RESET_PIN
++	hex "CompactFlash RESET pin"
++	default 0x30
++	depends on BOARD_ATSTK1000_CF_HACKS
++	help
++	  Select which GPIO pin to use for the CompactFlash RESET
++	  signal. This is specified as a hexadecimal number and should
++	  be defined as 0x20 * gpio_port + pin.
++
++	  The default is 0x30, which is pin 16 on PIOB, aka GPIO14.
++
++config BOARD_ATSTK1000_CF_DETECT_PIN
++	hex "CompactFlash DETECT pin"
++	default 0x3e
++	depends on BOARD_ATSTK1000_CF_HACKS
++	help
++	  Select which GPIO pin to use for the CompactFlash CD
++	  signal. This is specified as a hexadecimal number and should
++	  be defined as 0x20 * gpio_port + pin.
++
++	  The default is 0x3e, which is pin 30 on PIOB, aka GPIO15.
++
++endif	# stk 1000
+diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile
+index 8e09922..beead86 100644
+--- a/arch/avr32/boards/atstk1000/Makefile
++++ b/arch/avr32/boards/atstk1000/Makefile
+@@ -1,2 +1,4 @@
+ obj-y				+= setup.o flash.o
+ obj-$(CONFIG_BOARD_ATSTK1002)	+= atstk1002.o
++obj-$(CONFIG_BOARD_ATSTK1003)	+= atstk1003.o
++obj-$(CONFIG_BOARD_ATSTK1004)	+= atstk1004.o
+diff --git a/arch/avr32/boards/atstk1000/atstk1000.h b/arch/avr32/boards/atstk1000/atstk1000.h
+index 9a49ed0..9392d32 100644
+--- a/arch/avr32/boards/atstk1000/atstk1000.h
++++ b/arch/avr32/boards/atstk1000/atstk1000.h
+@@ -12,4 +12,6 @@
+ 
+ extern struct atmel_lcdfb_info atstk1000_lcdc_data;
+ 
++void atstk1000_setup_j2_leds(void);
++
+ #endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */
+diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
+index c9981b7..d30de89 100644
+--- a/arch/avr32/boards/atstk1000/atstk1002.c
++++ b/arch/avr32/boards/atstk1000/atstk1002.c
+@@ -11,17 +11,17 @@
+ #include <linux/etherdevice.h>
+ #include <linux/init.h>
+ #include <linux/kernel.h>
+-#include <linux/leds.h>
+ #include <linux/platform_device.h>
+ #include <linux/string.h>
+ #include <linux/types.h>
+ #include <linux/spi/spi.h>
++#include <linux/spi/at73c213.h>
+ 
+ #include <video/atmel_lcdc.h>
+ 
+ #include <asm/io.h>
+ #include <asm/setup.h>
+-#include <asm/arch/at32ap7000.h>
++#include <asm/arch/at32ap700x.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/init.h>
+ #include <asm/arch/portmux.h>
+@@ -48,8 +48,24 @@ static struct eth_platform_data __initdata eth_data[2] = {
+ 	},
+ };
+ 
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static struct at73c213_board_info at73c213_data = {
++	.ssc_id		= 0,
++	.shortname	= "AVR32 STK1000 external DAC",
++};
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
+ static struct spi_board_info spi0_board_info[] __initdata = {
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++	{
++		/* AT73C213 */
++		.modalias	= "at73c213",
++		.max_speed_hz	= 200000,
++		.chip_select	= 0,
++		.mode		= SPI_MODE_1,
++		.platform_data	= &at73c213_data,
++	},
++#endif
+ 	{
+ 		/* QVGA display */
+ 		.modalias	= "ltv350qv",
+@@ -60,12 +76,30 @@ static struct spi_board_info spi0_board_info[] __initdata = {
+ };
+ #endif
+ 
+-#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
+ static struct spi_board_info spi1_board_info[] __initdata = { {
+ 	/* patch in custom entries here */
+ } };
+ #endif
+ 
++static struct mci_platform_data __initdata mci0_data = {
++	.detect_pin	= GPIO_PIN_NONE,
++	.wp_pin		= GPIO_PIN_NONE,
++};
++
++static struct cf_platform_data __initdata cf0_data = {
++#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
++	.detect_pin	= CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
++	.reset_pin	= CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
++#else
++	.detect_pin	= GPIO_PIN_NONE,
++	.reset_pin	= GPIO_PIN_NONE,
++#endif
++	.vcc_pin	= GPIO_PIN_NONE,
++	.ready_pin	= GPIO_PIN_PB(27),
++	.cs		= 4,
++};
++
+ /*
+  * The next two functions should go away as the boot loader is
+  * supposed to initialize the macb address registers with a valid
+@@ -121,68 +155,44 @@ static void __init set_hw_addr(struct platform_device *pdev)
+ 	clk_put(pclk);
+ }
+ 
+-#ifdef CONFIG_BOARD_ATSTK1002_J2_LED
+-
+-static struct gpio_led stk_j2_led[] = {
+-#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8
+-#define LEDSTRING "J2 jumpered to LED8"
+-	{ .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
+-	{ .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
+-	{ .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
+-	{ .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
+-	{ .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
+-	{ .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
+-	{ .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
+-	{ .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
+-			.default_trigger = "heartbeat", },
+-#else	/* RGB */
+-#define LEDSTRING "J2 jumpered to RGB LEDs"
+-	{ .name = "r1:red",     .gpio = GPIO_PIN_PB( 8), },
+-	{ .name = "g1:green",   .gpio = GPIO_PIN_PB(10), },
+-	{ .name = "b1:blue",    .gpio = GPIO_PIN_PB(14), },
+-
+-	{ .name = "r2:red",     .gpio = GPIO_PIN_PB( 9),
+-			.default_trigger = "heartbeat", },
+-	{ .name = "g2:green",   .gpio = GPIO_PIN_PB(13), },
+-	{ .name = "b2:blue",    .gpio = GPIO_PIN_PB(15),
+-			.default_trigger = "heartbeat", },
+-	/* PB16, PB30 unused */
+-#endif
+-};
+-
+-static struct gpio_led_platform_data stk_j2_led_data = {
+-	.num_leds	= ARRAY_SIZE(stk_j2_led),
+-	.leds		= stk_j2_led,
+-};
+-
+-static struct platform_device stk_j2_led_dev = {
+-	.name		= "leds-gpio",
+-	.id		= 2,	/* gpio block J2 */
+-	.dev		= {
+-		.platform_data	= &stk_j2_led_data,
+-	},
+-};
+-
+-static void setup_j2_leds(void)
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static void __init atstk1002_setup_extdac(void)
+ {
+-	unsigned	i;
+-
+-	for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++)
+-		at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
+-
+-	printk("STK1002: " LEDSTRING "\n");
+-	platform_device_register(&stk_j2_led_dev);
++	struct clk *gclk;
++	struct clk *pll;
++
++	gclk = clk_get(NULL, "gclk0");
++	if (IS_ERR(gclk))
++		goto err_gclk;
++	pll = clk_get(NULL, "pll0");
++	if (IS_ERR(pll))
++		goto err_pll;
++
++	if (clk_set_parent(gclk, pll)) {
++		pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
++		goto err_set_clk;
++	}
++
++	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++	at73c213_data.dac_clk = gclk;
++
++err_set_clk:
++	clk_put(pll);
++err_pll:
++	clk_put(gclk);
++err_gclk:
++	return;
+ }
+-
+ #else
+-static void setup_j2_leds(void)
++static void __init atstk1002_setup_extdac(void)
+ {
++
+ }
+-#endif
++#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
+ 
+ void __init setup_board(void)
+ {
+-#ifdef	CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
++#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+ 	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
+ #else
+ 	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
+@@ -219,7 +229,7 @@ static int __init atstk1002_init(void)
+ 
+ 	at32_add_system_devices();
+ 
+-#ifdef	CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
++#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+ 	at32_add_device_usart(1);
+ #else
+ 	at32_add_device_usart(0);
+@@ -229,23 +239,35 @@ static int __init atstk1002_init(void)
+ #ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
+ 	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+ #endif
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
+ 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+ #endif
+-#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
+ 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
+ #endif
++	at32_add_device_twi(0);
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_add_device_mci(0, &mci0_data);
++#endif
+ #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
+ 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
+ #else
+ 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
+ 			     fbmem_start, fbmem_size);
+ #endif
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++	at32_add_device_usba(0, NULL);
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++	at32_add_device_ac97c(0);
++#else
++	at32_add_device_abdac(0);
++#endif
++	at32_add_device_cf(0, 2, &cf0_data);
++#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
+ 	at32_add_device_ssc(0, ATMEL_SSC_TX);
+ #endif
+ 
+-	setup_j2_leds();
++	atstk1000_setup_j2_leds();
++	atstk1002_setup_extdac();
+ 
+ 	return 0;
+ }
+diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
+new file mode 100644
+index 0000000..1842b7c
+--- /dev/null
++++ b/arch/avr32/boards/atstk1000/atstk1003.c
+@@ -0,0 +1,181 @@
++/*
++ * ATSTK1003 daughterboard-specific init code
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/string.h>
++#include <linux/types.h>
++
++#include <linux/spi/at73c213.h>
++#include <linux/spi/spi.h>
++
++#include <asm/setup.h>
++
++#include <asm/arch/at32ap700x.h>
++#include <asm/arch/board.h>
++#include <asm/arch/init.h>
++#include <asm/arch/portmux.h>
++
++#include "atstk1000.h"
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static struct at73c213_board_info at73c213_data = {
++	.ssc_id		= 0,
++	.shortname	= "AVR32 STK1000 external DAC",
++};
++#endif
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++static struct spi_board_info spi0_board_info[] __initdata = {
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++	{
++		/* AT73C213 */
++		.modalias	= "at73c213",
++		.max_speed_hz	= 200000,
++		.chip_select	= 0,
++		.mode		= SPI_MODE_1,
++		.platform_data	= &at73c213_data,
++	},
++#endif
++	/*
++	 * We can control the LTV350QV LCD panel, but it isn't much
++	 * point since we don't have an LCD controller...
++	 */
++};
++#endif
++
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++static struct spi_board_info spi1_board_info[] __initdata = { {
++	/* patch in custom entries here */
++} };
++#endif
++
++static struct cf_platform_data __initdata cf0_data = {
++#ifdef CONFIG_BOARD_ATSTK1002_CF_HACKS
++	.detect_pin	= CONFIG_BOARD_ATSTK1002_CF_DETECT_PIN,
++	.reset_pin	= CONFIG_BOARD_ATSTK1002_CF_RESET_PIN,
++#else
++	.detect_pin	= GPIO_PIN_NONE,
++	.reset_pin	= GPIO_PIN_NONE,
++#endif
++	.vcc_pin	= GPIO_PIN_NONE,
++	.ready_pin	= GPIO_PIN_PB(27),
++	.cs		= 4,
++};
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static void __init atstk1003_setup_extdac(void)
++{
++	struct clk *gclk;
++	struct clk *pll;
++
++	gclk = clk_get(NULL, "gclk0");
++	if (IS_ERR(gclk))
++		goto err_gclk;
++	pll = clk_get(NULL, "pll0");
++	if (IS_ERR(pll))
++		goto err_pll;
++
++	if (clk_set_parent(gclk, pll)) {
++		pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
++		goto err_set_clk;
++	}
++
++	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++	at73c213_data.dac_clk = gclk;
++
++err_set_clk:
++	clk_put(pll);
++err_pll:
++	clk_put(gclk);
++err_gclk:
++	return;
++}
++#else
++static void __init atstk1003_setup_extdac(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
++
++void __init setup_board(void)
++{
++#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
++#else
++	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
++#endif
++	/* USART 2/unused: expansion connector */
++	at32_map_usart(3, 2);	/* USART 3/C: /dev/ttyS2, DB9 */
++
++	at32_setup_serial_console(0);
++}
++
++static int __init atstk1003_init(void)
++{
++	/*
++	 * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
++	 * SDRAM-specific pins so that nobody messes with them.
++	 */
++	at32_reserve_pin(GPIO_PIN_PE(0));	/* DATA[16]	*/
++	at32_reserve_pin(GPIO_PIN_PE(1));	/* DATA[17]	*/
++	at32_reserve_pin(GPIO_PIN_PE(2));	/* DATA[18]	*/
++	at32_reserve_pin(GPIO_PIN_PE(3));	/* DATA[19]	*/
++	at32_reserve_pin(GPIO_PIN_PE(4));	/* DATA[20]	*/
++	at32_reserve_pin(GPIO_PIN_PE(5));	/* DATA[21]	*/
++	at32_reserve_pin(GPIO_PIN_PE(6));	/* DATA[22]	*/
++	at32_reserve_pin(GPIO_PIN_PE(7));	/* DATA[23]	*/
++	at32_reserve_pin(GPIO_PIN_PE(8));	/* DATA[24]	*/
++	at32_reserve_pin(GPIO_PIN_PE(9));	/* DATA[25]	*/
++	at32_reserve_pin(GPIO_PIN_PE(10));	/* DATA[26]	*/
++	at32_reserve_pin(GPIO_PIN_PE(11));	/* DATA[27]	*/
++	at32_reserve_pin(GPIO_PIN_PE(12));	/* DATA[28]	*/
++	at32_reserve_pin(GPIO_PIN_PE(13));	/* DATA[29]	*/
++	at32_reserve_pin(GPIO_PIN_PE(14));	/* DATA[30]	*/
++	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
++	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
++
++	at32_add_system_devices();
++
++#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_add_device_usart(1);
++#else
++	at32_add_device_usart(0);
++#endif
++	at32_add_device_usart(2);
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++#endif
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_add_device_mci(0, NULL);
++#endif
++	at32_add_device_usba(0, NULL);
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++	at32_add_device_ac97c(0);
++#else
++	at32_add_device_abdac(0);
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
++	at32_add_device_ssc(0, ATMEL_SSC_TX);
++#endif
++	at32_add_device_cf(0, 2, &cf0_data);
++
++	atstk1000_setup_j2_leds();
++	atstk1003_setup_extdac();
++
++	return 0;
++}
++postcore_initcall(atstk1003_init);
+diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
+new file mode 100644
+index 0000000..96015dd
+--- /dev/null
++++ b/arch/avr32/boards/atstk1000/atstk1004.c
+@@ -0,0 +1,152 @@
++/*
++ * ATSTK1003 daughterboard-specific init code
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/string.h>
++#include <linux/types.h>
++
++#include <linux/spi/at73c213.h>
++#include <linux/spi/spi.h>
++
++#include <video/atmel_lcdc.h>
++
++#include <asm/setup.h>
++
++#include <asm/arch/at32ap700x.h>
++#include <asm/arch/board.h>
++#include <asm/arch/init.h>
++#include <asm/arch/portmux.h>
++
++#include "atstk1000.h"
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static struct at73c213_board_info at73c213_data = {
++	.ssc_id		= 0,
++	.shortname	= "AVR32 STK1000 external DAC",
++};
++#endif
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++static struct spi_board_info spi0_board_info[] __initdata = {
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++	{
++		/* AT73C213 */
++		.modalias	= "at73c213",
++		.max_speed_hz	= 200000,
++		.chip_select	= 0,
++		.mode		= SPI_MODE_1,
++		.platform_data	= &at73c213_data,
++	},
++#endif
++	{
++		/* QVGA display */
++		.modalias	= "ltv350qv",
++		.max_speed_hz	= 16000000,
++		.chip_select	= 1,
++		.mode		= SPI_MODE_3,
++	},
++};
++#endif
++
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++static struct spi_board_info spi1_board_info[] __initdata = { {
++	/* patch in custom entries here */
++} };
++#endif
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static void __init atstk1004_setup_extdac(void)
++{
++	struct clk *gclk;
++	struct clk *pll;
++
++	gclk = clk_get(NULL, "gclk0");
++	if (IS_ERR(gclk))
++		goto err_gclk;
++	pll = clk_get(NULL, "pll0");
++	if (IS_ERR(pll))
++		goto err_pll;
++
++	if (clk_set_parent(gclk, pll)) {
++		pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
++		goto err_set_clk;
++	}
++
++	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++	at73c213_data.dac_clk = gclk;
++
++err_set_clk:
++	clk_put(pll);
++err_pll:
++	clk_put(gclk);
++err_gclk:
++	return;
++}
++#else
++static void __init atstk1004_setup_extdac(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
++
++void __init setup_board(void)
++{
++#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
++#else
++	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
++#endif
++	/* USART 2/unused: expansion connector */
++	at32_map_usart(3, 2);	/* USART 3/C: /dev/ttyS2, DB9 */
++
++	at32_setup_serial_console(0);
++}
++
++static int __init atstk1004_init(void)
++{
++	at32_add_system_devices();
++
++#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_add_device_usart(1);
++#else
++	at32_add_device_usart(0);
++#endif
++	at32_add_device_usart(2);
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++#endif
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_add_device_mci(0, NULL);
++#endif
++	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
++			     fbmem_start, fbmem_size);
++	at32_add_device_usba(0, NULL);
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++	at32_add_device_ac97c(0);
++#else
++	at32_add_device_abdac(0);
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
++	at32_add_device_ssc(0, ATMEL_SSC_TX);
++#endif
++
++	atstk1000_setup_j2_leds();
++	atstk1004_setup_extdac();
++
++	return 0;
++}
++postcore_initcall(atstk1004_init);
+diff --git a/arch/avr32/boards/atstk1000/flash.c b/arch/avr32/boards/atstk1000/flash.c
+index aac4300..3d0a102 100644
+--- a/arch/avr32/boards/atstk1000/flash.c
++++ b/arch/avr32/boards/atstk1000/flash.c
+@@ -15,7 +15,7 @@
+ 
+ #include <asm/arch/smc.h>
+ 
+-static struct smc_config flash_config __initdata = {
++static struct smc_timing flash_timing __initdata = {
+ 	.ncs_read_setup		= 0,
+ 	.nrd_setup		= 40,
+ 	.ncs_write_setup	= 0,
+@@ -28,7 +28,9 @@ static struct smc_config flash_config __initdata = {
+ 
+ 	.read_cycle		= 120,
+ 	.write_cycle		= 120,
++};
+ 
++static struct smc_config flash_config __initdata = {
+ 	.bus_width		= 2,
+ 	.nrd_controlled		= 1,
+ 	.nwe_controlled		= 1,
+@@ -82,6 +84,7 @@ static int __init atstk1000_flash_init(void)
+ {
+ 	int ret;
+ 
++	smc_set_timing(&flash_config, &flash_timing);
+ 	ret = smc_set_configuration(0, &flash_config);
+ 	if (ret < 0) {
+ 		printk(KERN_ERR "atstk1000: failed to set NOR flash timing\n");
+diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
+index c9af409..8bedf93 100644
+--- a/arch/avr32/boards/atstk1000/setup.c
++++ b/arch/avr32/boards/atstk1000/setup.c
+@@ -10,13 +10,17 @@
+ #include <linux/bootmem.h>
+ #include <linux/fb.h>
+ #include <linux/init.h>
++#include <linux/platform_device.h>
+ #include <linux/types.h>
+ #include <linux/linkage.h>
+ 
+ #include <video/atmel_lcdc.h>
+ 
+ #include <asm/setup.h>
++
++#include <asm/arch/at32ap700x.h>
+ #include <asm/arch/board.h>
++#include <asm/arch/portmux.h>
+ 
+ #include "atstk1000.h"
+ 
+@@ -61,3 +65,63 @@ struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = {
+ 	.default_monspecs	= &atstk1000_default_monspecs,
+ 	.guard_time		= 2,
+ };
++
++#ifdef CONFIG_BOARD_ATSTK1000_J2_LED
++#include <linux/leds.h>
++
++static struct gpio_led stk1000_j2_led[] = {
++#ifdef CONFIG_BOARD_ATSTK1000_J2_LED8
++#define LEDSTRING "J2 jumpered to LED8"
++	{ .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
++	{ .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
++	{ .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
++	{ .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
++	{ .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
++	{ .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
++	{ .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
++	{ .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
++			.default_trigger = "heartbeat", },
++#else	/* RGB */
++#define LEDSTRING "J2 jumpered to RGB LEDs"
++	{ .name = "r1:red",     .gpio = GPIO_PIN_PB( 8), },
++	{ .name = "g1:green",   .gpio = GPIO_PIN_PB(10), },
++	{ .name = "b1:blue",    .gpio = GPIO_PIN_PB(14), },
++
++	{ .name = "r2:red",     .gpio = GPIO_PIN_PB( 9),
++			.default_trigger = "heartbeat", },
++	{ .name = "g2:green",   .gpio = GPIO_PIN_PB(13), },
++	{ .name = "b2:blue",    .gpio = GPIO_PIN_PB(15),
++			.default_trigger = "heartbeat", },
++	/* PB16, PB30 unused */
++#endif
++};
++
++static struct gpio_led_platform_data stk1000_j2_led_data = {
++	.num_leds	= ARRAY_SIZE(stk1000_j2_led),
++	.leds		= stk1000_j2_led,
++};
++
++static struct platform_device stk1000_j2_led_dev = {
++	.name		= "leds-gpio",
++	.id		= 2,	/* gpio block J2 */
++	.dev		= {
++		.platform_data	= &stk1000_j2_led_data,
++	},
++};
++
++void __init atstk1000_setup_j2_leds(void)
++{
++	unsigned	i;
++
++	for (i = 0; i < ARRAY_SIZE(stk1000_j2_led); i++)
++		at32_select_gpio(stk1000_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
++
++	printk("STK1000: " LEDSTRING "\n");
++	platform_device_register(&stk1000_j2_led_dev);
++}
++#else /* CONFIG_BOARD_ATSTK1000_J2_LED */
++void __init atstk1000_setup_j2_leds(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_J2_LED */
+diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
+index b799a68..ca4538b 100644
+--- a/arch/avr32/configs/atngw100_defconfig
++++ b/arch/avr32/configs/atngw100_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.22-rc5
+-# Sat Jun 23 15:40:05 2007
++# Linux kernel version: 2.6.22.atmel.1
++# Thu Jul 12 17:49:20 2007
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+@@ -111,17 +111,22 @@ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
+ CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
+ CONFIG_CPU_AT32AP7000=y
++# CONFIG_CPU_AT32AP7001 is not set
++# CONFIG_CPU_AT32AP7002 is not set
+ # CONFIG_BOARD_ATSTK1000 is not set
+ CONFIG_BOARD_ATNGW100=y
++# CONFIG_BOARD_ATNGW100_I2C_GPIO is not set
+ CONFIG_LOADER_U_BOOT=y
+ 
+ #
+ # Atmel AVR32 AP options
+ #
+-# CONFIG_AP7000_32_BIT_SMC is not set
+-CONFIG_AP7000_16_BIT_SMC=y
+-# CONFIG_AP7000_8_BIT_SMC is not set
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++CONFIG_GPIO_DEV=y
+ CONFIG_LOAD_ADDRESS=0x10000000
+ CONFIG_ENTRY_ADDRESS=0x90000000
+ CONFIG_PHYS_OFFSET=0x10000000
+@@ -145,6 +150,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
+ # CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
+ # CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_DW_DMAC=y
+ # CONFIG_HZ_100 is not set
+ CONFIG_HZ_250=y
+ # CONFIG_HZ_300 is not set
+@@ -153,6 +159,27 @@ CONFIG_HZ=250
+ CONFIG_CMDLINE=""
+ 
+ #
++# Power managment options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++CONFIG_CPU_FREQ_STAT=m
++# CONFIG_CPU_FREQ_STAT_DETAILS is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
+ # Bus options
+ #
+ # CONFIG_ARCH_SUPPORTS_MSI is not set
+@@ -187,13 +214,8 @@ CONFIG_NET_KEY=y
+ # CONFIG_NET_KEY_MIGRATE is not set
+ CONFIG_INET=y
+ CONFIG_IP_MULTICAST=y
+-CONFIG_IP_ADVANCED_ROUTER=y
+-CONFIG_ASK_IP_FIB_HASH=y
+-# CONFIG_IP_FIB_TRIE is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
+ CONFIG_IP_FIB_HASH=y
+-# CONFIG_IP_MULTIPLE_TABLES is not set
+-# CONFIG_IP_ROUTE_MULTIPATH is not set
+-# CONFIG_IP_ROUTE_VERBOSE is not set
+ CONFIG_IP_PNP=y
+ CONFIG_IP_PNP_DHCP=y
+ # CONFIG_IP_PNP_BOOTP is not set
+@@ -240,6 +262,7 @@ CONFIG_IPV6_SIT=y
+ # CONFIG_NETWORK_SECMARK is not set
+ CONFIG_NETFILTER=y
+ # CONFIG_NETFILTER_DEBUG is not set
++CONFIG_BRIDGE_NETFILTER=y
+ 
+ #
+ # Core Netfilter Configuration
+@@ -284,6 +307,7 @@ CONFIG_NETFILTER_XT_MATCH_MAC=m
+ CONFIG_NETFILTER_XT_MATCH_MARK=m
+ CONFIG_NETFILTER_XT_MATCH_POLICY=m
+ CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+ CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+ CONFIG_NETFILTER_XT_MATCH_REALM=m
+@@ -359,13 +383,19 @@ CONFIG_IP6_NF_TARGET_REJECT=m
+ CONFIG_IP6_NF_MANGLE=m
+ CONFIG_IP6_NF_TARGET_HL=m
+ CONFIG_IP6_NF_RAW=m
++
++#
++# Bridge: Netfilter Configuration
++#
++# CONFIG_BRIDGE_NF_EBTABLES is not set
+ # CONFIG_IP_DCCP is not set
+ # CONFIG_IP_SCTP is not set
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
++CONFIG_BRIDGE=m
+ CONFIG_VLAN_8021Q=m
+ # CONFIG_DECNET is not set
++CONFIG_LLC=m
+ # CONFIG_LLC2 is not set
+ # CONFIG_IPX is not set
+ # CONFIG_ATALK is not set
+@@ -521,7 +551,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ #
+ # Misc devices
+ #
+-# CONFIG_BLINK is not set
+ # CONFIG_IDE is not set
+ 
+ #
+@@ -545,13 +574,26 @@ CONFIG_NETDEVICES=y
+ # CONFIG_BONDING is not set
+ # CONFIG_EQUALIZER is not set
+ CONFIG_TUN=m
+-# CONFIG_PHYLIB is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_FIXED_PHY is not set
+ 
+ #
+ # Ethernet (10 or 100Mbit)
+ #
+ CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
++# CONFIG_MII is not set
+ CONFIG_MACB=y
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+@@ -625,7 +667,15 @@ CONFIG_UNIX98_PTYS=y
+ # IPMI
+ #
+ # CONFIG_IPMI_HANDLER is not set
+-# CONFIG_WATCHDOG is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++CONFIG_AT32AP700X_WDT_TIMEOUT=2
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_RTC is not set
+ # CONFIG_GEN_RTC is not set
+@@ -636,7 +686,42 @@ CONFIG_UNIX98_PTYS=y
+ # TPM devices
+ #
+ # CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_ATMELTWI=m
++CONFIG_I2C_ATMELTWI_BAUDRATE=100000
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
+ 
+ #
+ # SPI support
+@@ -655,7 +740,7 @@ CONFIG_SPI_ATMEL=y
+ # SPI Protocol Masters
+ #
+ # CONFIG_SPI_AT25 is not set
+-# CONFIG_SPI_SPIDEV is not set
++CONFIG_SPI_SPIDEV=m
+ 
+ #
+ # Dallas's 1-wire bus
+@@ -706,8 +791,41 @@ CONFIG_SPI_ATMEL=y
+ #
+ # USB Gadget Support
+ #
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_ATMELMCI=y
+ 
+ #
+ # LED devices
+@@ -727,27 +845,62 @@ CONFIG_LEDS_TRIGGERS=y
+ CONFIG_LEDS_TRIGGER_TIMER=y
+ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+ 
++#
++# InfiniBand support
++#
+ 
+ #
+-# LED drivers
++# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+ #
+ 
+ #
+-# LED Triggers
++# Real Time Clock
+ #
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
+ 
+ #
+-# InfiniBand support
++# RTC interfaces
+ #
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
+ 
+ #
+-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
++# I2C RTC drivers
+ #
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
+ 
+ #
+-# Real Time Clock
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
+ #
+-# CONFIG_RTC_CLASS is not set
++CONFIG_RTC_DRV_AT32AP700X=y
+ 
+ #
+ # DMA Engine support
+@@ -781,7 +934,8 @@ CONFIG_JBD=y
+ # CONFIG_OCFS2_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_ROMFS_FS is not set
+-# CONFIG_INOTIFY is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
+ # CONFIG_DNOTIFY is not set
+ # CONFIG_AUTOFS_FS is not set
+@@ -936,7 +1090,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_ENABLE_MUST_CHECK=y
+ CONFIG_MAGIC_SYSRQ=y
+ # CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
++CONFIG_DEBUG_FS=y
+ # CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
+index 3b977fd..c3d4c33 100644
+--- a/arch/avr32/configs/atstk1002_defconfig
++++ b/arch/avr32/configs/atstk1002_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.22-rc5
+-# Sat Jun 23 15:32:08 2007
++# Linux kernel version: 2.6.23.atmel.1
++# Tue Oct 16 12:57:22 2007
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+@@ -18,20 +18,15 @@ CONFIG_GENERIC_BUG=y
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+ 
+ #
+-# Code maturity level options
++# General setup
+ #
+ CONFIG_EXPERIMENTAL=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+-
+-#
+-# General setup
+-#
+ CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SWAP=y
+ CONFIG_SYSVIPC=y
+-# CONFIG_IPC_NS is not set
+ CONFIG_SYSVIPC_SYSCTL=y
+ CONFIG_POSIX_MQUEUE=y
+ CONFIG_BSD_PROCESS_ACCT=y
+@@ -39,7 +34,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
+ CONFIG_TASKSTATS=y
+ CONFIG_TASK_DELAY_ACCT=y
+ # CONFIG_TASK_XACCT is not set
+-# CONFIG_UTS_NS is not set
++# CONFIG_USER_NS is not set
+ CONFIG_AUDIT=y
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
+@@ -63,7 +58,6 @@ CONFIG_FUTEX=y
+ CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+ CONFIG_VM_EVENT_COUNTERS=y
+@@ -74,24 +68,17 @@ CONFIG_SLUB=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=1
+-
+-#
+-# Loadable module support
+-#
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
++CONFIG_MODULE_FORCE_UNLOAD=y
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+-# CONFIG_KMOD is not set
+-
+-#
+-# Block layer
+-#
++CONFIG_KMOD=y
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+ # CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
+ 
+ #
+ # IO Schedulers
+@@ -99,12 +86,12 @@ CONFIG_BLOCK=y
+ CONFIG_IOSCHED_NOOP=y
+ # CONFIG_IOSCHED_AS is not set
+ # CONFIG_IOSCHED_DEADLINE is not set
+-# CONFIG_IOSCHED_CFQ is not set
++CONFIG_IOSCHED_CFQ=y
+ # CONFIG_DEFAULT_AS is not set
+ # CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-CONFIG_DEFAULT_NOOP=y
+-CONFIG_DEFAULT_IOSCHED="noop"
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
+ 
+ #
+ # System Type and features
+@@ -114,17 +101,27 @@ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
+ CONFIG_PLATFORM_AT32AP=y
+ CONFIG_CPU_AT32AP7000=y
++# CONFIG_CPU_AT32AP7001 is not set
++# CONFIG_CPU_AT32AP7002 is not set
+ CONFIG_BOARD_ATSTK1002=y
+ CONFIG_BOARD_ATSTK1000=y
+ # CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_ATSTK1002_CUSTOM is not set
++# CONFIG_BOARD_ATSTK1002_SPI1 is not set
++# CONFIG_BOARD_ATSTK1002_J2_LED is not set
++# CONFIG_BOARD_ATSTK1002_J2_LED8 is not set
++# CONFIG_BOARD_ATSTK1002_J2_RGB is not set
++# CONFIG_BOARD_ATSTK1002_ENABLE_AC97 is not set
++# CONFIG_BOARD_ATSTK1002_CF_HACKS is not set
+ CONFIG_LOADER_U_BOOT=y
+ 
+ #
+ # Atmel AVR32 AP options
+ #
+-# CONFIG_AP7000_32_BIT_SMC is not set
+-CONFIG_AP7000_16_BIT_SMC=y
+-# CONFIG_AP7000_8_BIT_SMC is not set
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++CONFIG_GPIO_DEV=y
+ CONFIG_LOAD_ADDRESS=0x10000000
+ CONFIG_ENTRY_ADDRESS=0x90000000
+ CONFIG_PHYS_OFFSET=0x10000000
+@@ -147,7 +144,9 @@ CONFIG_FLAT_NODE_MEM_MAP=y
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+ # CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
+ # CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_DW_DMAC=y
+ # CONFIG_HZ_100 is not set
+ CONFIG_HZ_250=y
+ # CONFIG_HZ_300 is not set
+@@ -156,6 +155,27 @@ CONFIG_HZ=250
+ CONFIG_CMDLINE=""
+ 
+ #
++# Power managment options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++CONFIG_CPU_FREQ_STAT=m
++# CONFIG_CPU_FREQ_STAT_DETAILS is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
+ # Bus options
+ #
+ # CONFIG_ARCH_SUPPORTS_MSI is not set
+@@ -163,7 +183,16 @@ CONFIG_CMDLINE=""
+ #
+ # PCCARD (PCMCIA/CardBus) support
+ #
+-# CONFIG_PCCARD is not set
++CONFIG_PCCARD=m
++# CONFIG_PCMCIA_DEBUG is not set
++CONFIG_PCMCIA=m
++# CONFIG_PCMCIA_LOAD_CIS is not set
++# CONFIG_PCMCIA_IOCTL is not set
++
++#
++# PC-card bridges
++#
++CONFIG_AT32_CF=m
+ 
+ #
+ # Executable file formats
+@@ -251,6 +280,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_MAC80211 is not set
+ # CONFIG_IEEE80211 is not set
+ # CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
+ 
+ #
+ # Device Drivers
+@@ -265,10 +295,6 @@ CONFIG_STANDALONE=y
+ # CONFIG_DEBUG_DRIVER is not set
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+-
+-#
+-# Connector - unified userspace <-> kernelspace linker
+-#
+ # CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
+ # CONFIG_MTD_DEBUG is not set
+@@ -327,6 +353,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+ #
+ # Self-contained MTD device drivers
+ #
++CONFIG_MTD_DATAFLASH=m
++# CONFIG_MTD_M25P80 is not set
+ # CONFIG_MTD_SLRAM is not set
+ # CONFIG_MTD_PHRAM is not set
+ # CONFIG_MTD_MTDRAM is not set
+@@ -345,20 +373,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+ # UBI - Unsorted block images
+ #
+ # CONFIG_MTD_UBI is not set
+-
+-#
+-# Parallel port support
+-#
+ # CONFIG_PARPORT is not set
+-
+-#
+-# Plug and Play support
+-#
+-# CONFIG_PNPACPI is not set
+-
+-#
+-# Block devices
+-#
++CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=m
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+@@ -369,11 +385,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-
+-#
+-# Misc devices
+-#
+-# CONFIG_BLINK is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=m
+ # CONFIG_IDE is not set
+ 
+ #
+@@ -381,29 +395,34 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ #
+ # CONFIG_RAID_ATTRS is not set
+ # CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
+ # CONFIG_SCSI_NETLINK is not set
+ # CONFIG_ATA is not set
+-
+-#
+-# Multi-device support (RAID and LVM)
+-#
+ # CONFIG_MD is not set
+-
+-#
+-# Network device support
+-#
+ CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
+ CONFIG_DUMMY=y
+ # CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
+ # CONFIG_EQUALIZER is not set
+ CONFIG_TUN=m
+-# CONFIG_PHYLIB is not set
++CONFIG_PHYLIB=y
+ 
+ #
+-# Ethernet (10 or 100Mbit)
++# MII PHY device drivers
+ #
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++CONFIG_LXT_PHY=y
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_FIXED_PHY is not set
+ CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
++# CONFIG_MII is not set
+ CONFIG_MACB=y
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+@@ -413,6 +432,7 @@ CONFIG_MACB=y
+ #
+ # CONFIG_WLAN_PRE80211 is not set
+ # CONFIG_WLAN_80211 is not set
++# CONFIG_NET_PCMCIA is not set
+ # CONFIG_WAN is not set
+ CONFIG_PPP=m
+ # CONFIG_PPP_MULTILINK is not set
+@@ -423,27 +443,56 @@ CONFIG_PPP_DEFLATE=m
+ CONFIG_PPP_BSDCOMP=m
+ # CONFIG_PPP_MPPE is not set
+ # CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
+ # CONFIG_SLIP is not set
+ CONFIG_SLHC=m
+ # CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+-
+-#
+-# ISDN subsystem
+-#
+ # CONFIG_ISDN is not set
+-
+-#
+-# Telephony Support
+-#
+ # CONFIG_PHONE is not set
+ 
+ #
+ # Input device support
+ #
+-# CONFIG_INPUT is not set
++CONFIG_INPUT=m
++# CONFIG_INPUT_FF_MEMLESS is not set
++CONFIG_INPUT_POLLDEV=m
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_APPLETOUCH is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++CONFIG_MOUSE_GPIO=m
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
+ 
+ #
+ # Hardware I/O ports
+@@ -472,34 +521,88 @@ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ CONFIG_UNIX98_PTYS=y
+ # CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
+ 
+ #
+-# IPMI
++# Watchdog Device Drivers
+ #
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_WATCHDOG is not set
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_RTC is not set
+ # CONFIG_GEN_RTC is not set
+ # CONFIG_R3964 is not set
+-# CONFIG_RAW_DRIVER is not set
+ 
+ #
+-# TPM devices
++# PCMCIA character devices
+ #
++# CONFIG_SYNCLINK_CS is not set
++# CONFIG_CARDMAN_4000 is not set
++# CONFIG_CARDMAN_4040 is not set
++# CONFIG_RAW_DRIVER is not set
+ # CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_ATMELTWI=m
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
+ 
+ #
+ # SPI support
+ #
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
+ 
+ #
+-# Dallas's 1-wire bus
++# SPI Protocol Masters
+ #
++# CONFIG_SPI_AT25 is not set
++CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
+ # CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
+ 
+ #
+@@ -517,26 +620,110 @@ CONFIG_UNIX98_PTYS=y
+ #
+ # Graphics support
+ #
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_LCD_LTV350QV=y
++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+ 
+ #
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
+ # CONFIG_VGASTATE is not set
+-# CONFIG_FB is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_LOGO is not set
+ 
+ #
+ # Sound
+ #
+-# CONFIG_SOUND is not set
++CONFIG_SOUND=m
++
++#
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++# CONFIG_SND_SUPPORT_OLD_API is not set
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++
++#
++# Generic devices
++#
++CONFIG_SND_AC97_CODEC=m
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++
++#
++# AVR32 devices
++#
++CONFIG_SND_ATMEL_AC97=m
++
++#
++# SPI devices
++#
++CONFIG_SND_AT73C213=m
++CONFIG_SND_AT73C213_TARGET_BITRATE=48000
++
++#
++# PCMCIA devices
++#
++# CONFIG_SND_VXPOCKET is not set
++# CONFIG_SND_PDAUDIOCF is not set
++
++#
++# System on Chip audio support
++#
++# CONFIG_SND_SOC is not set
++
++#
++# SoC Audio support for SuperH
++#
+ 
+ #
+-# USB support
++# Open Sound System
+ #
+-# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_SOUND_PRIME is not set
++CONFIG_AC97_BUS=m
++# CONFIG_HID_SUPPORT is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
+ # CONFIG_USB_ARCH_HAS_OHCI is not set
+ # CONFIG_USB_ARCH_HAS_EHCI is not set
++# CONFIG_USB is not set
+ 
+ #
+ # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+@@ -545,34 +732,108 @@ CONFIG_UNIX98_PTYS=y
+ #
+ # USB Gadget Support
+ #
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++# CONFIG_USB_GADGET_DEBUG_FS is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_ATMELMCI=y
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=m
++
++#
++# LED drivers
++#
++CONFIG_LEDS_GPIO=m
+ 
+ #
+-# LED devices
++# LED Triggers
+ #
+-# CONFIG_NEW_LEDS is not set
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=m
++CONFIG_LEDS_TRIGGER_HEARTBEAT=m
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++# CONFIG_RTC_HCTOSYS is not set
++# CONFIG_RTC_DEBUG is not set
+ 
+ #
+-# LED drivers
++# RTC interfaces
+ #
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
+ 
+ #
+-# LED Triggers
++# I2C RTC drivers
+ #
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
+ 
+ #
+-# InfiniBand support
++# SPI RTC drivers
+ #
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
+ 
+ #
+-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
++# Platform RTC drivers
+ #
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
+ 
+ #
+-# Real Time Clock
++# on-CPU RTC drivers
+ #
+-# CONFIG_RTC_CLASS is not set
++CONFIG_RTC_DRV_AT32AP700X=y
+ 
+ #
+ # DMA Engine support
+@@ -588,13 +849,21 @@ CONFIG_UNIX98_PTYS=y
+ #
+ 
+ #
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
+ # File systems
+ #
+-CONFIG_EXT2_FS=m
++CONFIG_EXT2_FS=y
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+-# CONFIG_EXT3_FS is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
+ # CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+@@ -609,7 +878,7 @@ CONFIG_INOTIFY_USER=y
+ # CONFIG_DNOTIFY is not set
+ # CONFIG_AUTOFS_FS is not set
+ # CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
++CONFIG_FUSE_FS=m
+ 
+ #
+ # CD-ROM/DVD Filesystems
+@@ -638,7 +907,7 @@ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+ CONFIG_RAMFS=y
+-CONFIG_CONFIGFS_FS=m
++CONFIG_CONFIGFS_FS=y
+ 
+ #
+ # Miscellaneous filesystems
+@@ -683,12 +952,17 @@ CONFIG_SUNRPC=y
+ # CONFIG_SUNRPC_BIND34 is not set
+ # CONFIG_RPCSEC_GSS_KRB5 is not set
+ # CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
++CONFIG_SMB_FS=m
++# CONFIG_SMB_NLS_DEFAULT is not set
++CONFIG_CIFS=m
++# CONFIG_CIFS_STATS is not set
++# CONFIG_CIFS_WEAK_PW_HASH is not set
++# CONFIG_CIFS_XATTR is not set
++# CONFIG_CIFS_DEBUG2 is not set
++# CONFIG_CIFS_EXPERIMENTAL is not set
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
+ # CONFIG_AFS_FS is not set
+-# CONFIG_9P_FS is not set
+ 
+ #
+ # Partition Types
+@@ -758,6 +1032,7 @@ CONFIG_DEBUG_FS=y
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+@@ -782,10 +1057,6 @@ CONFIG_FORCED_INLINING=y
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-
+-#
+-# Cryptographic options
+-#
+ # CONFIG_CRYPTO is not set
+ 
+ #
+@@ -796,6 +1067,7 @@ CONFIG_CRC_CCITT=m
+ # CONFIG_CRC16 is not set
+ # CONFIG_CRC_ITU_T is not set
+ CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_AUDIT_GENERIC=y
+ CONFIG_ZLIB_INFLATE=y
+diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
+new file mode 100644
+index 0000000..0dc834f
+--- /dev/null
++++ b/arch/avr32/configs/atstk1003_defconfig
+@@ -0,0 +1,1045 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.24-rc1
++# Thu Nov  1 10:58:37 2007
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++CONFIG_TASKSTATS=y
++CONFIG_TASK_DELAY_ACCT=y
++# CONFIG_TASK_XACCT is not set
++# CONFIG_USER_NS is not set
++CONFIG_AUDIT=y
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_RELAY=y
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_BASE_FULL is not set
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++# CONFIG_SLUB_DEBUG is not set
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_AS is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++CONFIG_DEFAULT_NOOP=y
++CONFIG_DEFAULT_IOSCHED="noop"
++
++#
++# System Type and features
++#
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
++# CONFIG_CPU_AT32AP7000 is not set
++CONFIG_CPU_AT32AP7001=y
++# CONFIG_CPU_AT32AP7002 is not set
++CONFIG_BOARD_ATSTK1003=y
++CONFIG_BOARD_ATSTK1000=y
++# CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
++# CONFIG_BOARD_ATSTK100X_SPI1 is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
++# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
++CONFIG_BOARD_ATSTK1000_EXTDAC=y
++# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
++# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
++CONFIG_LOADER_U_BOOT=y
++
++#
++# Atmel AVR32 AP options
++#
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++# CONFIG_GPIO_DEV is not set
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_DW_DMAC=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_CMDLINE=""
++
++#
++# Power management options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++CONFIG_PCCARD=m
++# CONFIG_PCMCIA_DEBUG is not set
++CONFIG_PCMCIA=m
++CONFIG_PCMCIA_LOAD_CIS=y
++# CONFIG_PCMCIA_IOCTL is not set
++
++#
++# PC-card bridges
++#
++CONFIG_AT32_CF=m
++
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_PNP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++CONFIG_FW_LOADER=m
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x8000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=m
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=m
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=m
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++# CONFIG_BLK_DEV_SD is not set
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++CONFIG_TUN=m
++# CONFIG_VETH is not set
++# CONFIG_NET_ETHERNET is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_NET_PCMCIA is not set
++# CONFIG_WAN is not set
++CONFIG_PPP=m
++# CONFIG_PPP_MULTILINK is not set
++# CONFIG_PPP_FILTER is not set
++CONFIG_PPP_ASYNC=m
++# CONFIG_PPP_SYNC_TTY is not set
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++# CONFIG_PPP_MPPE is not set
++# CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=m
++# CONFIG_INPUT_FF_MEMLESS is not set
++CONFIG_INPUT_POLLDEV=m
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_APPLETOUCH is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++CONFIG_MOUSE_GPIO=m
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_RTC is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++
++#
++# PCMCIA character devices
++#
++# CONFIG_SYNCLINK_CS is not set
++# CONFIG_CARDMAN_4000 is not set
++# CONFIG_CARDMAN_4040 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_ATMELTWI=m
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++CONFIG_SOUND=m
++
++#
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++CONFIG_SND_SUPPORT_OLD_API=y
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++
++#
++# Generic devices
++#
++CONFIG_SND_AC97_CODEC=m
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++
++#
++# AVR32 devices
++#
++CONFIG_SND_ATMEL_AC97=m
++
++#
++# SPI devices
++#
++CONFIG_SND_AT73C213=m
++CONFIG_SND_AT73C213_TARGET_BITRATE=48000
++
++#
++# PCMCIA devices
++#
++# CONFIG_SND_VXPOCKET is not set
++# CONFIG_SND_PDAUDIOCF is not set
++
++#
++# System on Chip audio support
++#
++# CONFIG_SND_SOC is not set
++
++#
++# SoC Audio support for SuperH
++#
++
++#
++# Open Sound System
++#
++CONFIG_SOUND_PRIME=m
++# CONFIG_SOUND_MSNDCLAS is not set
++# CONFIG_SOUND_MSNDPIN is not set
++CONFIG_SOUND_AT32_ABDAC=m
++CONFIG_AC97_BUS=m
++# CONFIG_HID_SUPPORT is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_DEBUG_FS=y
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++# CONFIG_MMC_BLOCK_BOUNCE is not set
++# CONFIG_SDIO_UART is not set
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_ATMELMCI=y
++# CONFIG_MMC_SPI is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++CONFIG_LEDS_GPIO=y
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
++
++#
++# Userspace I/O
++#
++CONFIG_UIO=m
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_DNOTIFY is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++CONFIG_FUSE_FS=m
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=y
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++# CONFIG_NFS_FS is not set
++# CONFIG_NFSD is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=m
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=m
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=m
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++CONFIG_FRAME_POINTER=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_KPROBES is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++# CONFIG_CRYPTO is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_CRC_CCITT=m
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_AUDIT_GENERIC=y
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
+new file mode 100644
+index 0000000..b002a46
+--- /dev/null
++++ b/arch/avr32/configs/atstk1004_defconfig
+@@ -0,0 +1,722 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.24-rc1
++# Thu Nov  1 11:07:19 2007
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++# CONFIG_SYSVIPC is not set
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_BLK_DEV_INITRD is not set
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_BASE_FULL is not set
++# CONFIG_FUTEX is not set
++# CONFIG_EPOLL is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_EVENTFD is not set
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++# CONFIG_SLAB is not set
++# CONFIG_SLUB is not set
++CONFIG_SLOB=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++# CONFIG_MODULES is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_AS is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++
++#
++# System Type and features
++#
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
++# CONFIG_CPU_AT32AP7000 is not set
++# CONFIG_CPU_AT32AP7001 is not set
++CONFIG_CPU_AT32AP7002=y
++CONFIG_BOARD_ATSTK1004=y
++CONFIG_BOARD_ATSTK1000=y
++# CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
++# CONFIG_BOARD_ATSTK100X_SPI1 is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
++# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
++CONFIG_BOARD_ATSTK1000_EXTDAC=y
++# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
++# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
++CONFIG_LOADER_U_BOOT=y
++
++#
++# Atmel AVR32 AP options
++#
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++# CONFIG_GPIO_DEV is not set
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_DW_DMAC=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_CMDLINE=""
++
++#
++# Power management options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_PNP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++# CONFIG_FW_LOADER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x8000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++# CONFIG_BLK_DEV is not set
++# CONFIG_MISC_DEVICES is not set
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_NETDEVICES is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_RTC is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_VIRTUAL is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_LCD_LTV350QV=y
++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++# CONFIG_LOGO is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++# CONFIG_USB_ZERO is not set
++CONFIG_USB_ETH=y
++# CONFIG_USB_ETH_RNDIS is not set
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FILE_STORAGE is not set
++# CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++# CONFIG_MMC_BLOCK_BOUNCE is not set
++# CONFIG_SDIO_UART is not set
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_ATMELMCI=y
++# CONFIG_MMC_SPI is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++CONFIG_LEDS_GPIO=y
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++# CONFIG_RTC_INTF_PROC is not set
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_INOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_DNOTIFY is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++# CONFIG_JFFS2_FS_WRITEBUFFER is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++# CONFIG_NETWORK_FILESYSTEMS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++# CONFIG_CRYPTO is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff --git a/arch/avr32/drivers/Makefile b/arch/avr32/drivers/Makefile
+new file mode 100644
+index 0000000..b429b75
+--- /dev/null
++++ b/arch/avr32/drivers/Makefile
+@@ -0,0 +1 @@
++obj-$(CONFIG_DW_DMAC)			+= dw-dmac.o
+diff --git a/arch/avr32/drivers/dw-dmac.c b/arch/avr32/drivers/dw-dmac.c
+new file mode 100644
+index 0000000..224eb30
+--- /dev/null
++++ b/arch/avr32/drivers/dw-dmac.c
+@@ -0,0 +1,761 @@
++/*
++ * Driver for the Synopsys DesignWare DMA Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++
++#include "dw-dmac.h"
++
++#define DMAC_NR_CHANNELS 3
++#define DMAC_MAX_BLOCKSIZE 4095
++
++enum {
++	CH_STATE_FREE = 0,
++	CH_STATE_ALLOCATED,
++	CH_STATE_BUSY,
++};
++
++struct dw_dma_lli {
++	dma_addr_t	sar;
++	dma_addr_t	dar;
++	dma_addr_t	llp;
++	u32		ctllo;
++	u32		ctlhi;
++	u32		sstat;
++	u32		dstat;
++};
++
++struct dw_dma_block {
++	struct dw_dma_lli *lli_vaddr;
++	dma_addr_t lli_dma_addr;
++};
++
++struct dw_dma_channel {
++	unsigned int state;
++        int is_cyclic;
++	struct dma_request_sg *req_sg;
++	struct dma_request_cyclic *req_cyclic;
++	unsigned int nr_blocks;
++	int direction;
++	struct dw_dma_block *block;
++};
++
++struct dw_dma_controller {
++	spinlock_t lock;
++	void * __iomem	regs;
++	struct dma_pool *lli_pool;
++	struct clk *hclk;
++	struct dma_controller dma;
++	struct dw_dma_channel channel[DMAC_NR_CHANNELS];
++};
++#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
++
++#define dmac_writel_hi(dmac, reg, value) \
++	__raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_readl_hi(dmac, reg) \
++	__raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_writel_lo(dmac, reg, value) \
++	__raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
++#define dmac_readl_lo(dmac, reg) \
++	__raw_readl((dmac)->regs + DW_DMAC_##reg)
++#define dmac_chan_writel_hi(dmac, chan, reg, value) \
++	__raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
++			       + DW_DMAC_CHAN_##reg + 4))
++#define dmac_chan_readl_hi(dmac, chan, reg) \
++	__raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
++#define dmac_chan_writel_lo(dmac, chan, reg, value) \
++	__raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define dmac_chan_readl_lo(dmac, chan, reg) \
++	__raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define set_channel_bit(dmac, reg, chan) \
++	dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
++#define clear_channel_bit(dmac, reg, chan) \
++	dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
++
++static int dmac_alloc_channel(struct dma_controller *_dmac)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++	struct dw_dma_channel *chan;
++	unsigned long flags;
++	int i;
++
++	spin_lock_irqsave(&dmac->lock, flags);
++	for (i = 0; i < DMAC_NR_CHANNELS; i++)
++		if (dmac->channel[i].state == CH_STATE_FREE)
++			break;
++
++	if (i < DMAC_NR_CHANNELS) {
++		chan = &dmac->channel[i];
++		chan->state = CH_STATE_ALLOCATED;
++	} else {
++		i = -EBUSY;
++	}
++
++	spin_unlock_irqrestore(&dmac->lock, flags);
++
++	return i;
++}
++
++static void dmac_release_channel(struct dma_controller *_dmac, int channel)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++
++	BUG_ON(channel >= DMAC_NR_CHANNELS
++	       || dmac->channel[channel].state != CH_STATE_ALLOCATED);
++
++	dmac->channel[channel].state = CH_STATE_FREE;
++}
++
++static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
++					    unsigned int nr_blocks)
++{
++	struct dw_dma_block *block;
++	void *p;
++	unsigned int i;
++
++	block = kmalloc(nr_blocks * sizeof(*block),
++			GFP_KERNEL);
++	if (unlikely(!block))
++		return NULL;
++
++	for (i = 0; i < nr_blocks; i++) {
++		p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
++				   &block[i].lli_dma_addr);
++		block[i].lli_vaddr = p;
++		if (unlikely(!p))
++			goto fail;
++	}
++
++	return block;
++
++fail:
++	for (i = 0; i < nr_blocks; i++) {
++		if (!block[i].lli_vaddr)
++			break;
++		dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
++			      block[i].lli_dma_addr);
++	}
++	kfree(block);
++	return NULL;
++}
++
++static void cleanup_channel(struct dw_dma_controller *dmac,
++			    struct dw_dma_channel *chan)
++{
++	unsigned int i;
++
++	if (chan->nr_blocks > 1) {
++		for (i = 0; i < chan->nr_blocks; i++)
++			dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
++				      chan->block[i].lli_dma_addr);
++		kfree(chan->block);
++	}
++
++	chan->state = CH_STATE_ALLOCATED;
++}
++
++static int dmac_prepare_request_sg(struct dma_controller *_dmac,
++				   struct dma_request_sg *req)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++	struct dw_dma_channel *chan;
++	unsigned long ctlhi, ctllo, cfghi, cfglo;
++	unsigned long block_size;
++	unsigned int nr_blocks;
++	int ret, i, direction;
++	unsigned long flags;
++
++	spin_lock_irqsave(&dmac->lock, flags);
++
++	ret = -EINVAL;
++	if (req->req.channel >= DMAC_NR_CHANNELS
++	    || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++	    || req->block_size > DMAC_MAX_BLOCKSIZE) {
++		spin_unlock_irqrestore(&dmac->lock, flags);
++		return -EINVAL;
++	}
++
++	chan = &dmac->channel[req->req.channel];
++	chan->state = CH_STATE_BUSY;
++	chan->req_sg = req;
++	chan->is_cyclic = 0;
++
++	/*
++	 * We have marked the channel as busy, so no need to keep the
++	 * lock as long as we only touch the channel-specific
++	 * registers
++	 */
++	spin_unlock_irqrestore(&dmac->lock, flags);
++
++	/*
++	 * There may be limitations in the driver and/or the DMA
++	 * controller that prevents us from sending a whole
++	 * scatterlist item in one go.  Taking this into account,
++	 * calculate the number of block transfers we need to set up.
++	 *
++	 * FIXME: Let the peripheral driver know about the maximum
++	 * block size we support. We really don't want to use a
++	 * different block size than what was suggested by the
++	 * peripheral.
++	 *
++	 * Each block will get its own Linked List Item (LLI) below.
++	 */
++	block_size = req->block_size;
++	nr_blocks = req->nr_blocks;
++	pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
++		 block_size, nr_blocks, req->nr_sg);
++
++	BUG_ON(nr_blocks == 0);
++	chan->nr_blocks = nr_blocks;
++
++	ret = -EINVAL;
++	cfglo = cfghi = 0;
++	switch (req->direction) {
++	case DMA_DIR_MEM_TO_PERIPH:
++		direction = DMA_TO_DEVICE;
++		cfghi = req->periph_id << (43 - 32);
++		break;
++
++	case DMA_DIR_PERIPH_TO_MEM:
++		direction = DMA_FROM_DEVICE;
++		cfghi = req->periph_id << (39 - 32);
++		break;
++	default:
++		goto out_unclaim_channel;
++	}
++
++        chan->direction = direction;
++
++	dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++	dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++
++	ctlhi = block_size >> req->width;
++	ctllo = ((req->direction << 20)
++		 // | (1 << 14) | (1 << 11) // source/dest burst trans len
++		 | (req->width << 4) | (req->width << 1)
++		 | (1 << 0));		 // interrupt enable
++
++	if (nr_blocks == 1) {
++		/* Only one block: No need to use block chaining */
++		if (direction == DMA_TO_DEVICE) {
++			dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++					    req->sg->dma_address);
++			dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++					    req->data_reg);
++			ctllo |= 2 << 7; // no dst increment
++		} else {
++			dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++					    req->data_reg);
++			dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++					    req->sg->dma_address);
++			ctllo |= 2 << 9; // no src increment
++		}
++		dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
++		dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
++		pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
++	} else {
++		struct dw_dma_lli *lli, *lli_prev = NULL;
++		int j = 0, offset = 0;
++
++		ret = -ENOMEM;
++		chan->block = allocate_blocks(dmac, nr_blocks);
++		if (!chan->block)
++			goto out_unclaim_channel;
++
++		if (direction == DMA_TO_DEVICE)
++			ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++		else
++			ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++
++		/*
++		 * Map scatterlist items to blocks. One scatterlist
++		 * item may need more than one block for the reasons
++		 * mentioned above.
++		 */
++		for (i = 0; i < nr_blocks; i++) {
++			lli = chan->block[i].lli_vaddr;
++			if (lli_prev) {
++				lli_prev->llp = chan->block[i].lli_dma_addr;
++				pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++					 i - 1, chan->block[i - 1].lli_vaddr,
++					 chan->block[i - 1].lli_dma_addr,
++					 lli_prev->sar, lli_prev->dar, lli_prev->llp,
++					 lli_prev->ctllo, lli_prev->ctlhi);
++			}
++			lli->llp = 0;
++			lli->ctllo = ctllo;
++			lli->ctlhi = ctlhi;
++			if (direction == DMA_TO_DEVICE) {
++				lli->sar = req->sg[j].dma_address + offset;
++				lli->dar = req->data_reg;
++			} else {
++				lli->sar = req->data_reg;
++				lli->dar = req->sg[j].dma_address + offset;
++			}
++			lli_prev = lli;
++
++			offset += block_size;
++			if (offset > req->sg[j].length) {
++				j++;
++				offset = 0;
++			}
++		}
++
++		pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++			 i - 1, chan->block[i - 1].lli_vaddr,
++			 chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++			 lli_prev->dar, lli_prev->llp,
++			 lli_prev->ctllo, lli_prev->ctlhi);
++
++		/*
++		 * SAR, DAR and CTL are initialized from the LLI. We
++		 * only have to enable the LLI bits in CTL.
++		 */
++		dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
++		dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++				    chan->block[0].lli_dma_addr);
++		dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
++	}
++
++	set_channel_bit(dmac, MASK_XFER, req->req.channel);
++	set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++	if (req->req.block_complete)
++		set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++	else
++		clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++
++	return 0;
++
++out_unclaim_channel:
++	chan->state = CH_STATE_ALLOCATED;
++	return ret;
++}
++
++static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
++                                       struct dma_request_cyclic *req)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++	struct dw_dma_channel *chan;
++	unsigned long ctlhi, ctllo, cfghi, cfglo;
++	unsigned long block_size;
++	int ret, i, direction;
++	unsigned long flags;
++
++	spin_lock_irqsave(&dmac->lock, flags);
++
++        block_size = (req->buffer_size/req->periods) >> req->width;
++
++	ret = -EINVAL;
++	if (req->req.channel >= DMAC_NR_CHANNELS
++	    || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++            || (req->periods == 0)
++	    || block_size > DMAC_MAX_BLOCKSIZE) {
++		spin_unlock_irqrestore(&dmac->lock, flags);
++		return -EINVAL;
++	}
++
++	chan = &dmac->channel[req->req.channel];
++	chan->state = CH_STATE_BUSY;
++	chan->is_cyclic = 1;
++        chan->req_cyclic = req;
++
++	/*
++	 * We have marked the channel as busy, so no need to keep the
++	 * lock as long as we only touch the channel-specific
++	 * registers
++	 */
++	spin_unlock_irqrestore(&dmac->lock, flags);
++
++	/*
++          Setup
++	 */
++	BUG_ON(req->buffer_size % req->periods);
++	/* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
++
++	chan->nr_blocks = req->periods;
++
++	ret = -EINVAL;
++	cfglo = cfghi = 0;
++	switch (req->direction) {
++	case DMA_DIR_MEM_TO_PERIPH:
++		direction = DMA_TO_DEVICE;
++		cfghi = req->periph_id << (43 - 32);
++		break;
++
++	case DMA_DIR_PERIPH_TO_MEM:
++		direction = DMA_FROM_DEVICE;
++		cfghi = req->periph_id << (39 - 32);
++		break;
++	default:
++		goto out_unclaim_channel;
++	}
++
++        chan->direction = direction;
++
++	dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++	dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++
++	ctlhi = block_size;
++	ctllo = ((req->direction << 20)
++		 | (req->width << 4) | (req->width << 1)
++		 | (1 << 0));		 // interrupt enable
++
++        {
++		struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
++
++		ret = -ENOMEM;
++		chan->block = allocate_blocks(dmac, req->periods);
++		if (!chan->block)
++			goto out_unclaim_channel;
++
++		if (direction == DMA_TO_DEVICE)
++			ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++		else
++			ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++
++		/*
++		 * Set up a linked list items where each period gets
++		 * an item. The linked list item for the last period
++		 * points back to the star of the buffer making a
++		 * cyclic buffer.
++		 */
++		for (i = 0; i < req->periods; i++) {
++			lli = chan->block[i].lli_vaddr;
++			if (lli_prev) {
++				lli_prev->llp = chan->block[i].lli_dma_addr;
++				/* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++				   i - 1, chan->block[i - 1].lli_vaddr,
++				   chan->block[i - 1].lli_dma_addr,
++				   lli_prev->sar, lli_prev->dar, lli_prev->llp,
++				   lli_prev->ctllo, lli_prev->ctlhi);*/
++			}
++			lli->llp = 0;
++			lli->ctllo = ctllo;
++			lli->ctlhi = ctlhi;
++			if (direction == DMA_TO_DEVICE) {
++				lli->sar = req->buffer_start + i*(block_size << req->width);
++				lli->dar = req->data_reg;
++			} else {
++				lli->sar = req->data_reg;
++				lli->dar = req->buffer_start + i*(block_size << req->width);
++			}
++			lli_prev = lli;
++		}
++		lli->llp = chan->block[0].lli_dma_addr;
++
++		/*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++		  i - 1, chan->block[i - 1].lli_vaddr,
++		  chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++		  lli_prev->dar, lli_prev->llp,
++		  lli_prev->ctllo, lli_prev->ctlhi); */
++
++		/*
++		 * SAR, DAR and CTL are initialized from the LLI. We
++		 * only have to enable the LLI bits in CTL.
++		 */
++		dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++				    chan->block[0].lli_dma_addr);
++		dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
++	}
++
++	clear_channel_bit(dmac, MASK_XFER, req->req.channel);
++	set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++	if (req->req.block_complete)
++		set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++	else
++		clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++
++	return 0;
++
++out_unclaim_channel:
++	chan->state = CH_STATE_ALLOCATED;
++	return ret;
++}
++
++static int dmac_start_request(struct dma_controller *_dmac,
++			      unsigned int channel)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++
++	BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++	set_channel_bit(dmac, CH_EN, channel);
++
++	return 0;
++}
++
++static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
++                                       unsigned int channel)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++	struct dw_dma_channel *chan;
++        dma_addr_t current_pos;
++
++	BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++        chan = &dmac->channel[channel];
++
++	switch (chan->direction) {
++	case DMA_TO_DEVICE:
++		current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
++		break;
++	case DMA_FROM_DEVICE:
++		current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
++		break;
++	default:
++		return 0;
++	}
++
++
++        if (!current_pos) {
++		if (chan->is_cyclic) {
++			current_pos = chan->req_cyclic->buffer_start;
++		} else {
++			current_pos = chan->req_sg->sg->dma_address;
++		}
++	}
++
++	return current_pos;
++}
++
++
++static int dmac_stop_request(struct dma_controller *_dmac,
++                             unsigned int channel)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++	struct dw_dma_channel *chan;
++
++	BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++	chan = &dmac->channel[channel];
++	pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
++		 chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
++		 dmac_chan_readl_lo(dmac, channel, DAR),
++		 dmac_chan_readl_lo(dmac, channel, LLP),
++		 dmac_chan_readl_hi(dmac, channel, CTL),
++		 dmac_chan_readl_lo(dmac, channel, CTL));
++
++	if (chan->state == CH_STATE_BUSY) {
++		clear_channel_bit(dmac, CH_EN, channel);
++		cleanup_channel(dmac, &dmac->channel[channel]);
++	}
++
++	return 0;
++}
++
++
++static void dmac_block_complete(struct dw_dma_controller *dmac)
++{
++	struct dw_dma_channel *chan;
++	unsigned long status, chanid;
++
++	status = dmac_readl_lo(dmac, STATUS_BLOCK);
++
++	while (status) {
++		struct dma_request *req;
++		chanid = __ffs(status);
++		chan = &dmac->channel[chanid];
++
++                if (chan->is_cyclic) {
++			BUG_ON(!chan->req_cyclic
++			       || !chan->req_cyclic->req.block_complete);
++			req = &chan->req_cyclic->req;
++                } else {
++			BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
++			req = &chan->req_sg->req;
++                }
++		dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
++		req->block_complete(req);
++		status = dmac_readl_lo(dmac, STATUS_BLOCK);
++	}
++}
++
++static void dmac_xfer_complete(struct dw_dma_controller *dmac)
++{
++	struct dw_dma_channel *chan;
++	struct dma_request *req;
++	unsigned long status, chanid;
++
++	status = dmac_readl_lo(dmac, STATUS_XFER);
++
++	while (status) {
++		chanid = __ffs(status);
++		chan = &dmac->channel[chanid];
++
++		dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
++
++                req = &chan->req_sg->req;
++                BUG_ON(!req);
++                cleanup_channel(dmac, chan);
++                if (req->xfer_complete)
++			req->xfer_complete(req);
++
++		status = dmac_readl_lo(dmac, STATUS_XFER);
++	}
++}
++
++static void dmac_error(struct dw_dma_controller *dmac)
++{
++	struct dw_dma_channel *chan;
++	unsigned long status, chanid;
++
++	status = dmac_readl_lo(dmac, STATUS_ERROR);
++
++	while (status) {
++		struct dma_request *req;
++
++		chanid = __ffs(status);
++		chan = &dmac->channel[chanid];
++
++		dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
++		clear_channel_bit(dmac, CH_EN, chanid);
++
++                if (chan->is_cyclic) {
++			BUG_ON(!chan->req_cyclic);
++			req = &chan->req_cyclic->req;
++                } else {
++			BUG_ON(!chan->req_sg);
++			req = &chan->req_sg->req;
++                }
++
++		cleanup_channel(dmac, chan);
++		if (req->error)
++			req->error(req);
++
++		status = dmac_readl_lo(dmac, STATUS_XFER);
++	}
++}
++
++static irqreturn_t dmac_interrupt(int irq, void *dev_id)
++{
++	struct dw_dma_controller *dmac = dev_id;
++	unsigned long status;
++	int ret = IRQ_NONE;
++
++	spin_lock(&dmac->lock);
++
++	status = dmac_readl_lo(dmac, STATUS_INT);
++
++	while (status) {
++		ret = IRQ_HANDLED;
++		if (status & 0x10)
++			dmac_error(dmac);
++		if (status & 0x02)
++			dmac_block_complete(dmac);
++		if (status & 0x01)
++			dmac_xfer_complete(dmac);
++
++		status = dmac_readl_lo(dmac, STATUS_INT);
++	}
++
++	spin_unlock(&dmac->lock);
++	return ret;
++}
++
++static int __devinit dmac_probe(struct platform_device *pdev)
++{
++	struct dw_dma_controller *dmac;
++	struct resource *regs;
++	int ret;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs)
++		return -ENXIO;
++
++	dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
++	if (!dmac)
++		return -ENOMEM;
++	memset(dmac, 0, sizeof(*dmac));
++
++	dmac->hclk = clk_get(&pdev->dev, "hclk");
++	if (IS_ERR(dmac->hclk)) {
++		ret = PTR_ERR(dmac->hclk);
++		goto out_free_dmac;
++	}
++	clk_enable(dmac->hclk);
++
++	ret = -ENOMEM;
++	dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
++					 sizeof(struct dw_dma_lli), 4, 0);
++	if (!dmac->lli_pool)
++		goto out_disable_clk;
++
++	spin_lock_init(&dmac->lock);
++	dmac->dma.dev = &pdev->dev;
++	dmac->dma.alloc_channel = dmac_alloc_channel;
++	dmac->dma.release_channel = dmac_release_channel;
++	dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
++	dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
++	dmac->dma.start_request = dmac_start_request;
++	dmac->dma.stop_request = dmac_stop_request;
++	dmac->dma.get_current_pos = dmac_get_current_pos;
++
++	dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!dmac->regs)
++		goto out_free_pool;
++
++	ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
++			  IRQF_SAMPLE_RANDOM, pdev->name, dmac);
++	if (ret)
++		goto out_unmap_regs;
++
++	/* Enable the DMA controller */
++	dmac_writel_lo(dmac, CFG, 1);
++
++	register_dma_controller(&dmac->dma);
++
++	printk(KERN_INFO
++	       "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
++	       dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
++
++	return 0;
++
++out_unmap_regs:
++	iounmap(dmac->regs);
++out_free_pool:
++	dma_pool_destroy(dmac->lli_pool);
++out_disable_clk:
++	clk_disable(dmac->hclk);
++	clk_put(dmac->hclk);
++out_free_dmac:
++	kfree(dmac);
++	return ret;
++}
++
++static struct platform_driver dmac_driver = {
++	.probe		= dmac_probe,
++	.driver		= {
++		.name		= "dmaca",
++	},
++};
++
++static int __init dmac_init(void)
++{
++	return platform_driver_register(&dmac_driver);
++}
++subsys_initcall(dmac_init);
++
++static void __exit dmac_exit(void)
++{
++	platform_driver_unregister(&dmac_driver);
++}
++module_exit(dmac_exit);
++
++MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_LICENSE("GPL");
+diff --git a/arch/avr32/drivers/dw-dmac.h b/arch/avr32/drivers/dw-dmac.h
+new file mode 100644
+index 0000000..1f67921
+--- /dev/null
++++ b/arch/avr32/drivers/dw-dmac.h
+@@ -0,0 +1,42 @@
++/*
++ * Driver for the Synopsys DesignWare DMA Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __AVR32_DW_DMAC_H__
++#define __AVR32_DW_DMAC_H__
++
++#define DW_DMAC_CFG		0x398
++#define DW_DMAC_CH_EN		0x3a0
++
++#define DW_DMAC_STATUS_XFER	0x2e8
++#define DW_DMAC_STATUS_BLOCK	0x2f0
++#define DW_DMAC_STATUS_ERROR	0x308
++
++#define DW_DMAC_MASK_XFER	0x310
++#define DW_DMAC_MASK_BLOCK	0x318
++#define DW_DMAC_MASK_ERROR	0x330
++
++#define DW_DMAC_CLEAR_XFER	0x338
++#define DW_DMAC_CLEAR_BLOCK	0x340
++#define DW_DMAC_CLEAR_ERROR	0x358
++
++#define DW_DMAC_STATUS_INT	0x360
++
++#define DW_DMAC_CHAN_SAR	0x000
++#define DW_DMAC_CHAN_DAR	0x008
++#define DW_DMAC_CHAN_LLP	0x010
++#define DW_DMAC_CHAN_CTL	0x018
++#define DW_DMAC_CHAN_SSTAT	0x020
++#define DW_DMAC_CHAN_DSTAT	0x028
++#define DW_DMAC_CHAN_SSTATAR	0x030
++#define DW_DMAC_CHAN_DSTATAR	0x038
++#define DW_DMAC_CHAN_CFG	0x040
++#define DW_DMAC_CHAN_SGR	0x048
++#define DW_DMAC_CHAN_DSR	0x050
++
++#endif /* __AVR32_DW_DMAC_H__ */
+diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile
+index 90e5aff..1aedaeb 100644
+--- a/arch/avr32/kernel/Makefile
++++ b/arch/avr32/kernel/Makefile
+@@ -9,10 +9,6 @@ obj-y				+= syscall_table.o syscall-stubs.o irq.o
+ obj-y				+= setup.o traps.o semaphore.o ptrace.o
+ obj-y				+= signal.o sys_avr32.o process.o time.o
+ obj-y				+= init_task.o switch_to.o cpu.o
++obj-y				+= dma-controller.o
+ obj-$(CONFIG_MODULES)		+= module.o avr32_ksyms.o
+ obj-$(CONFIG_KPROBES)		+= kprobes.o
+-
+-USE_STANDARD_AS_RULE		:= true
+-
+-%.lds: %.lds.c FORCE
+-	$(call if_changed_dep,cpp_lds_S)
+diff --git a/arch/avr32/kernel/dma-controller.c b/arch/avr32/kernel/dma-controller.c
+new file mode 100644
+index 0000000..fb654b3
+--- /dev/null
++++ b/arch/avr32/kernel/dma-controller.c
+@@ -0,0 +1,34 @@
++/*
++ * Preliminary DMA controller framework for AVR32
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <asm/dma-controller.h>
++
++static LIST_HEAD(controllers);
++
++int register_dma_controller(struct dma_controller *dmac)
++{
++	static int next_id;
++
++	dmac->id = next_id++;
++	list_add_tail(&dmac->list, &controllers);
++
++	return 0;
++}
++EXPORT_SYMBOL(register_dma_controller);
++
++struct dma_controller *find_dma_controller(int id)
++{
++	struct dma_controller *dmac;
++
++	list_for_each_entry(dmac, &controllers, list)
++		if (dmac->id == id)
++			return dmac;
++	return NULL;
++}
++EXPORT_SYMBOL(find_dma_controller);
+diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
+index 42657f1..ccadfd9 100644
+--- a/arch/avr32/kernel/entry-avr32b.S
++++ b/arch/avr32/kernel/entry-avr32b.S
+@@ -159,11 +159,18 @@ handle_vmalloc_miss:
+ 
+ 	.section .scall.text,"ax",@progbits
+ system_call:
++#ifdef CONFIG_PREEMPT
++	mask_interrupts
++#endif
+ 	pushm	r12		/* r12_orig */
+ 	stmts	--sp, r0-lr
+-	zero_fp
++
+ 	mfsr	r0, SYSREG_RAR_SUP
+ 	mfsr	r1, SYSREG_RSR_SUP
++#ifdef CONFIG_PREEMPT
++	unmask_interrupts
++#endif
++	zero_fp
+ 	stm	--sp, r0-r1
+ 
+ 	/* check for syscall tracing */
+@@ -638,6 +645,13 @@ irq_level\level:
+ 	stmts	--sp,r0-lr
+ 	mfsr	r8, rar_int\level
+ 	mfsr	r9, rsr_int\level
++
++#ifdef CONFIG_PREEMPT
++	sub	r11, pc, (. - system_call)
++	cp.w	r11, r8
++	breq	4f
++#endif
++
+ 	pushm	r8-r9
+ 
+ 	mov	r11, sp
+@@ -668,6 +682,16 @@ irq_level\level:
+ 	sub	sp, -4		/* ignore r12_orig */
+ 	rete
+ 
++#ifdef CONFIG_PREEMPT
++4:	mask_interrupts
++	mfsr	r8, rsr_int\level
++	sbr	r8, 16
++	mtsr	rsr_int\level, r8
++	ldmts	sp++, r0-lr
++	sub	sp, -4		/* ignore r12_orig */
++	rete
++#endif
++
+ 2:	get_thread_info	r0
+ 	ld.w	r1, r0[TI_flags]
+ 	bld	r1, TIF_CPU_GOING_TO_SLEEP
+diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
+index d08b0bc..4b4c188 100644
+--- a/arch/avr32/kernel/setup.c
++++ b/arch/avr32/kernel/setup.c
+@@ -248,7 +248,7 @@ static int __init early_parse_fbmem(char *p)
+ 
+ 	fbmem_size = memparse(p, &p);
+ 	if (*p == '@') {
+-		fbmem_start = memparse(p, &p);
++		fbmem_start = memparse(p + 1, &p);
+ 		ret = add_reserved_region(fbmem_start,
+ 					  fbmem_start + fbmem_size - 1,
+ 					  "Framebuffer");
+diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S
+new file mode 100644
+index 0000000..ce9ac96
+--- /dev/null
++++ b/arch/avr32/kernel/vmlinux.lds.S
+@@ -0,0 +1,143 @@
++/*
++ * AVR32 linker script for the Linux kernel
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#define LOAD_OFFSET 0x00000000
++#include <asm-generic/vmlinux.lds.h>
++#include <asm/cache.h>
++#include <asm/thread_info.h>
++
++OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
++OUTPUT_ARCH(avr32)
++ENTRY(_start)
++
++/* Big endian */
++jiffies = jiffies_64 + 4;
++
++SECTIONS
++{
++	. = CONFIG_ENTRY_ADDRESS;
++	.init		: AT(ADDR(.init) - LOAD_OFFSET) {
++		_stext = .;
++		__init_begin = .;
++			_sinittext = .;
++			*(.text.reset)
++			*(.init.text)
++			/*
++			 * .exit.text is discarded at runtime, not
++			 * link time, to deal with references from
++			 * __bug_table
++			 */
++			*(.exit.text)
++			_einittext = .;
++		. = ALIGN(4);
++		__tagtable_begin = .;
++			*(.taglist.init)
++		__tagtable_end = .;
++			*(.init.data)
++		. = ALIGN(16);
++		__setup_start = .;
++			*(.init.setup)
++		__setup_end = .;
++		. = ALIGN(4);
++		__initcall_start = .;
++			INITCALLS
++		__initcall_end = .;
++		__con_initcall_start = .;
++			*(.con_initcall.init)
++		__con_initcall_end = .;
++		__security_initcall_start = .;
++			*(.security_initcall.init)
++		__security_initcall_end = .;
++#ifdef CONFIG_BLK_DEV_INITRD
++		. = ALIGN(32);
++		__initramfs_start = .;
++			*(.init.ramfs)
++		__initramfs_end = .;
++#endif
++		. = ALIGN(PAGE_SIZE);
++		__init_end = .;
++	}
++
++	.text		: AT(ADDR(.text) - LOAD_OFFSET) {
++		_evba = .;
++		_text = .;
++		*(.ex.text)
++		. = 0x50;
++		*(.tlbx.ex.text)
++		. = 0x60;
++		*(.tlbr.ex.text)
++		. = 0x70;
++		*(.tlbw.ex.text)
++		. = 0x100;
++		*(.scall.text)
++		*(.irq.text)
++		TEXT_TEXT
++		SCHED_TEXT
++		LOCK_TEXT
++		KPROBES_TEXT
++		*(.fixup)
++		*(.gnu.warning)
++		_etext = .;
++	} = 0xd703d703
++
++	. = ALIGN(4);
++	__ex_table	: AT(ADDR(__ex_table) - LOAD_OFFSET) {
++		__start___ex_table = .;
++		*(__ex_table)
++		__stop___ex_table = .;
++	}
++
++	BUG_TABLE
++
++	RODATA
++
++	. = ALIGN(THREAD_SIZE);
++
++	.data		: AT(ADDR(.data) - LOAD_OFFSET) {
++		_data = .;
++		_sdata = .;
++		/*
++		 * First, the init task union, aligned to an 8K boundary.
++		 */
++		*(.data.init_task)
++
++		/* Then, the cacheline aligned data */
++		. = ALIGN(L1_CACHE_BYTES);
++		*(.data.cacheline_aligned)
++
++		/* And the rest... */
++		*(.data.rel*)
++		DATA_DATA
++		CONSTRUCTORS
++
++		_edata = .;
++	}
++
++
++	. = ALIGN(8);
++	.bss    	: AT(ADDR(.bss) - LOAD_OFFSET) {
++		__bss_start = .;
++		*(.bss)
++		*(COMMON)
++		. = ALIGN(8);
++		__bss_stop = .;
++		_end = .;
++	}
++
++	/* When something in the kernel is NOT compiled as a module, the module
++	 * cleanup code and data are put into these segments. Both can then be
++	 * thrown away, as cleanup code is never called unless it's a module.
++	 */
++	/DISCARD/       	: {
++		*(.exit.data)
++		*(.exitcall.exit)
++	}
++
++	DWARF_DEBUG
++}
+diff --git a/arch/avr32/kernel/vmlinux.lds.c b/arch/avr32/kernel/vmlinux.lds.c
+deleted file mode 100644
+index db0438f..0000000
+--- a/arch/avr32/kernel/vmlinux.lds.c
++++ /dev/null
+@@ -1,142 +0,0 @@
+-/*
+- * AVR32 linker script for the Linux kernel
+- *
+- * Copyright (C) 2004-2006 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-#define LOAD_OFFSET 0x00000000
+-#include <asm-generic/vmlinux.lds.h>
+-
+-OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
+-OUTPUT_ARCH(avr32)
+-ENTRY(_start)
+-
+-/* Big endian */
+-jiffies = jiffies_64 + 4;
+-
+-SECTIONS
+-{
+-	. = CONFIG_ENTRY_ADDRESS;
+-	.init		: AT(ADDR(.init) - LOAD_OFFSET) {
+-		_stext = .;
+-		__init_begin = .;
+-			_sinittext = .;
+-			*(.text.reset)
+-			*(.init.text)
+-			/*
+-			 * .exit.text is discarded at runtime, not
+-			 * link time, to deal with references from
+-			 * __bug_table
+-			 */
+-			*(.exit.text)
+-			_einittext = .;
+-		. = ALIGN(4);
+-		__tagtable_begin = .;
+-			*(.taglist.init)
+-		__tagtable_end = .;
+-			*(.init.data)
+-		. = ALIGN(16);
+-		__setup_start = .;
+-			*(.init.setup)
+-		__setup_end = .;
+-		. = ALIGN(4);
+-		__initcall_start = .;
+-			INITCALLS
+-		__initcall_end = .;
+-		__con_initcall_start = .;
+-			*(.con_initcall.init)
+-		__con_initcall_end = .;
+-		__security_initcall_start = .;
+-			*(.security_initcall.init)
+-		__security_initcall_end = .;
+-#ifdef CONFIG_BLK_DEV_INITRD
+-		. = ALIGN(32);
+-		__initramfs_start = .;
+-			*(.init.ramfs)
+-		__initramfs_end = .;
+-#endif
+-		. = ALIGN(4096);
+-		__init_end = .;
+-	}
+-
+-	. = ALIGN(8192);
+-	.text		: AT(ADDR(.text) - LOAD_OFFSET) {
+-		_evba = .;
+-		_text = .;
+-		*(.ex.text)
+-		. = 0x50;
+-		*(.tlbx.ex.text)
+-		. = 0x60;
+-		*(.tlbr.ex.text)
+-		. = 0x70;
+-		*(.tlbw.ex.text)
+-		. = 0x100;
+-		*(.scall.text)
+-		*(.irq.text)
+-		TEXT_TEXT
+-		SCHED_TEXT
+-		LOCK_TEXT
+-		KPROBES_TEXT
+-		*(.fixup)
+-		*(.gnu.warning)
+-		_etext = .;
+-	} = 0xd703d703
+-
+-	. = ALIGN(4);
+-	__ex_table	: AT(ADDR(__ex_table) - LOAD_OFFSET) {
+-		__start___ex_table = .;
+-		*(__ex_table)
+-		__stop___ex_table = .;
+-	}
+-
+-	BUG_TABLE
+-
+-	RODATA
+-
+-	. = ALIGN(8192);
+-
+-	.data		: AT(ADDR(.data) - LOAD_OFFSET) {
+-		_data = .;
+-		_sdata = .;
+-		/*
+-		 * First, the init task union, aligned to an 8K boundary.
+-		 */
+-		*(.data.init_task)
+-
+-		/* Then, the cacheline aligned data */
+-		. = ALIGN(32);
+-		*(.data.cacheline_aligned)
+-
+-		/* And the rest... */
+-		*(.data.rel*)
+-		DATA_DATA
+-		CONSTRUCTORS
+-
+-		_edata = .;
+-	}
+-
+-
+-	. = ALIGN(8);
+-	.bss    	: AT(ADDR(.bss) - LOAD_OFFSET) {
+-		__bss_start = .;
+-		*(.bss)
+-		*(COMMON)
+-		. = ALIGN(8);
+-		__bss_stop = .;
+-		_end = .;
+-	}
+-
+-	/* When something in the kernel is NOT compiled as a module, the module
+-	 * cleanup code and data are put into these segments. Both can then be
+-	 * thrown away, as cleanup code is never called unless it's a module.
+-	 */
+-	/DISCARD/       	: {
+-		*(.exit.data)
+-		*(.exitcall.exit)
+-	}
+-
+-	DWARF_DEBUG
+-}
+diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig
+index eb30783..0eb590a 100644
+--- a/arch/avr32/mach-at32ap/Kconfig
++++ b/arch/avr32/mach-at32ap/Kconfig
+@@ -3,9 +3,9 @@ if PLATFORM_AT32AP
+ menu "Atmel AVR32 AP options"
+ 
+ choice
+-	prompt "AT32AP7000 static memory bus width"
+-	depends on CPU_AT32AP7000
+-	default AP7000_16_BIT_SMC
++	prompt "AT32AP700x static memory bus width"
++	depends on CPU_AT32AP700X
++	default AP700X_16_BIT_SMC
+ 	help
+ 	  Define the width of the AP7000 external static memory interface.
+ 	  This is used to determine how to mangle the address and/or data
+@@ -15,17 +15,24 @@ choice
+ 	  width for all chip selects, excluding the flash (which is using
+ 	  raw access and is thus not affected by any of this.)
+ 
+-config AP7000_32_BIT_SMC
++config AP700X_32_BIT_SMC
+ 	bool "32 bit"
+ 
+-config AP7000_16_BIT_SMC
++config AP700X_16_BIT_SMC
+ 	bool "16 bit"
+ 
+-config AP7000_8_BIT_SMC
++config AP700X_8_BIT_SMC
+ 	bool "8 bit"
+ 
+ endchoice
+ 
++config GPIO_DEV
++	bool "GPIO /dev interface"
++	select CONFIGFS_FS
++	default n
++	help
++	  Say `Y' to enable a /dev interface to the GPIO pins.
++
+ endmenu
+ 
+ endif # PLATFORM_AT32AP
+diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
+index a8b4450..0f6162e 100644
+--- a/arch/avr32/mach-at32ap/Makefile
++++ b/arch/avr32/mach-at32ap/Makefile
+@@ -1,4 +1,5 @@
+ obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
+-obj-$(CONFIG_CPU_AT32AP7000)	+= at32ap7000.o
+-obj-$(CONFIG_CPU_AT32AP7000)	+= time-tc.o
++obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o
++obj-$(CONFIG_CPU_AT32AP700X)	+= time-tc.o
+ obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
++obj-$(CONFIG_GPIO_DEV)		+= gpio-dev.o
+diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
+deleted file mode 100644
+index 64cc558..0000000
+--- a/arch/avr32/mach-at32ap/at32ap7000.c
++++ /dev/null
+@@ -1,1324 +0,0 @@
+-/*
+- * Copyright (C) 2005-2006 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-#include <linux/clk.h>
+-#include <linux/fb.h>
+-#include <linux/init.h>
+-#include <linux/platform_device.h>
+-#include <linux/dma-mapping.h>
+-#include <linux/spi/spi.h>
+-
+-#include <asm/io.h>
+-
+-#include <asm/arch/at32ap7000.h>
+-#include <asm/arch/board.h>
+-#include <asm/arch/portmux.h>
+-
+-#include <video/atmel_lcdc.h>
+-
+-#include "clock.h"
+-#include "hmatrix.h"
+-#include "pio.h"
+-#include "pm.h"
+-
+-/*
+- * We can reduce the code size a bit by using a constant here. Since
+- * this file is completely chip-specific, it's safe to not use
+- * ioremap. Generic drivers should of course never do this.
+- */
+-#define AT32_PM_BASE	0xfff00000
+-
+-#define PBMEM(base)					\
+-	{						\
+-		.start		= base,			\
+-		.end		= base + 0x3ff,		\
+-		.flags		= IORESOURCE_MEM,	\
+-	}
+-#define IRQ(num)					\
+-	{						\
+-		.start		= num,			\
+-		.end		= num,			\
+-		.flags		= IORESOURCE_IRQ,	\
+-	}
+-#define NAMED_IRQ(num, _name)				\
+-	{						\
+-		.start		= num,			\
+-		.end		= num,			\
+-		.name		= _name,		\
+-		.flags		= IORESOURCE_IRQ,	\
+-	}
+-
+-/* REVISIT these assume *every* device supports DMA, but several
+- * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
+- */
+-#define DEFINE_DEV(_name, _id)					\
+-static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
+-static struct platform_device _name##_id##_device = {		\
+-	.name		= #_name,				\
+-	.id		= _id,					\
+-	.dev		= {					\
+-		.dma_mask = &_name##_id##_dma_mask,		\
+-		.coherent_dma_mask = DMA_32BIT_MASK,		\
+-	},							\
+-	.resource	= _name##_id##_resource,		\
+-	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
+-}
+-#define DEFINE_DEV_DATA(_name, _id)				\
+-static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
+-static struct platform_device _name##_id##_device = {		\
+-	.name		= #_name,				\
+-	.id		= _id,					\
+-	.dev		= {					\
+-		.dma_mask = &_name##_id##_dma_mask,		\
+-		.platform_data	= &_name##_id##_data,		\
+-		.coherent_dma_mask = DMA_32BIT_MASK,		\
+-	},							\
+-	.resource	= _name##_id##_resource,		\
+-	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
+-}
+-
+-#define select_peripheral(pin, periph, flags)			\
+-	at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
+-
+-#define DEV_CLK(_name, devname, bus, _index)			\
+-static struct clk devname##_##_name = {				\
+-	.name		= #_name,				\
+-	.dev		= &devname##_device.dev,		\
+-	.parent		= &bus##_clk,				\
+-	.mode		= bus##_clk_mode,			\
+-	.get_rate	= bus##_clk_get_rate,			\
+-	.index		= _index,				\
+-}
+-
+-static DEFINE_SPINLOCK(pm_lock);
+-
+-unsigned long at32ap7000_osc_rates[3] = {
+-	[0] = 32768,
+-	/* FIXME: these are ATSTK1002-specific */
+-	[1] = 20000000,
+-	[2] = 12000000,
+-};
+-
+-static unsigned long osc_get_rate(struct clk *clk)
+-{
+-	return at32ap7000_osc_rates[clk->index];
+-}
+-
+-static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
+-{
+-	unsigned long div, mul, rate;
+-
+-	if (!(control & PM_BIT(PLLEN)))
+-		return 0;
+-
+-	div = PM_BFEXT(PLLDIV, control) + 1;
+-	mul = PM_BFEXT(PLLMUL, control) + 1;
+-
+-	rate = clk->parent->get_rate(clk->parent);
+-	rate = (rate + div / 2) / div;
+-	rate *= mul;
+-
+-	return rate;
+-}
+-
+-static unsigned long pll0_get_rate(struct clk *clk)
+-{
+-	u32 control;
+-
+-	control = pm_readl(PLL0);
+-
+-	return pll_get_rate(clk, control);
+-}
+-
+-static unsigned long pll1_get_rate(struct clk *clk)
+-{
+-	u32 control;
+-
+-	control = pm_readl(PLL1);
+-
+-	return pll_get_rate(clk, control);
+-}
+-
+-/*
+- * The AT32AP7000 has five primary clock sources: One 32kHz
+- * oscillator, two crystal oscillators and two PLLs.
+- */
+-static struct clk osc32k = {
+-	.name		= "osc32k",
+-	.get_rate	= osc_get_rate,
+-	.users		= 1,
+-	.index		= 0,
+-};
+-static struct clk osc0 = {
+-	.name		= "osc0",
+-	.get_rate	= osc_get_rate,
+-	.users		= 1,
+-	.index		= 1,
+-};
+-static struct clk osc1 = {
+-	.name		= "osc1",
+-	.get_rate	= osc_get_rate,
+-	.index		= 2,
+-};
+-static struct clk pll0 = {
+-	.name		= "pll0",
+-	.get_rate	= pll0_get_rate,
+-	.parent		= &osc0,
+-};
+-static struct clk pll1 = {
+-	.name		= "pll1",
+-	.get_rate	= pll1_get_rate,
+-	.parent		= &osc0,
+-};
+-
+-/*
+- * The main clock can be either osc0 or pll0.  The boot loader may
+- * have chosen one for us, so we don't really know which one until we
+- * have a look at the SM.
+- */
+-static struct clk *main_clock;
+-
+-/*
+- * Synchronous clocks are generated from the main clock. The clocks
+- * must satisfy the constraint
+- *   fCPU >= fHSB >= fPB
+- * i.e. each clock must not be faster than its parent.
+- */
+-static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
+-{
+-	return main_clock->get_rate(main_clock) >> shift;
+-};
+-
+-static void cpu_clk_mode(struct clk *clk, int enabled)
+-{
+-	unsigned long flags;
+-	u32 mask;
+-
+-	spin_lock_irqsave(&pm_lock, flags);
+-	mask = pm_readl(CPU_MASK);
+-	if (enabled)
+-		mask |= 1 << clk->index;
+-	else
+-		mask &= ~(1 << clk->index);
+-	pm_writel(CPU_MASK, mask);
+-	spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long cpu_clk_get_rate(struct clk *clk)
+-{
+-	unsigned long cksel, shift = 0;
+-
+-	cksel = pm_readl(CKSEL);
+-	if (cksel & PM_BIT(CPUDIV))
+-		shift = PM_BFEXT(CPUSEL, cksel) + 1;
+-
+-	return bus_clk_get_rate(clk, shift);
+-}
+-
+-static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
+-{
+-	u32 control;
+-	unsigned long parent_rate, child_div, actual_rate, div;
+-
+-	parent_rate = clk->parent->get_rate(clk->parent);
+-	control = pm_readl(CKSEL);
+-
+-	if (control & PM_BIT(HSBDIV))
+-		child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
+-	else
+-		child_div = 1;
+-
+-	if (rate > 3 * (parent_rate / 4) || child_div == 1) {
+-		actual_rate = parent_rate;
+-		control &= ~PM_BIT(CPUDIV);
+-	} else {
+-		unsigned int cpusel;
+-		div = (parent_rate + rate / 2) / rate;
+-		if (div > child_div)
+-			div = child_div;
+-		cpusel = (div > 1) ? (fls(div) - 2) : 0;
+-		control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
+-		actual_rate = parent_rate / (1 << (cpusel + 1));
+-	}
+-
+-	pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
+-			clk->name, rate, actual_rate);
+-
+-	if (apply)
+-		pm_writel(CKSEL, control);
+-
+-	return actual_rate;
+-}
+-
+-static void hsb_clk_mode(struct clk *clk, int enabled)
+-{
+-	unsigned long flags;
+-	u32 mask;
+-
+-	spin_lock_irqsave(&pm_lock, flags);
+-	mask = pm_readl(HSB_MASK);
+-	if (enabled)
+-		mask |= 1 << clk->index;
+-	else
+-		mask &= ~(1 << clk->index);
+-	pm_writel(HSB_MASK, mask);
+-	spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long hsb_clk_get_rate(struct clk *clk)
+-{
+-	unsigned long cksel, shift = 0;
+-
+-	cksel = pm_readl(CKSEL);
+-	if (cksel & PM_BIT(HSBDIV))
+-		shift = PM_BFEXT(HSBSEL, cksel) + 1;
+-
+-	return bus_clk_get_rate(clk, shift);
+-}
+-
+-static void pba_clk_mode(struct clk *clk, int enabled)
+-{
+-	unsigned long flags;
+-	u32 mask;
+-
+-	spin_lock_irqsave(&pm_lock, flags);
+-	mask = pm_readl(PBA_MASK);
+-	if (enabled)
+-		mask |= 1 << clk->index;
+-	else
+-		mask &= ~(1 << clk->index);
+-	pm_writel(PBA_MASK, mask);
+-	spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long pba_clk_get_rate(struct clk *clk)
+-{
+-	unsigned long cksel, shift = 0;
+-
+-	cksel = pm_readl(CKSEL);
+-	if (cksel & PM_BIT(PBADIV))
+-		shift = PM_BFEXT(PBASEL, cksel) + 1;
+-
+-	return bus_clk_get_rate(clk, shift);
+-}
+-
+-static void pbb_clk_mode(struct clk *clk, int enabled)
+-{
+-	unsigned long flags;
+-	u32 mask;
+-
+-	spin_lock_irqsave(&pm_lock, flags);
+-	mask = pm_readl(PBB_MASK);
+-	if (enabled)
+-		mask |= 1 << clk->index;
+-	else
+-		mask &= ~(1 << clk->index);
+-	pm_writel(PBB_MASK, mask);
+-	spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long pbb_clk_get_rate(struct clk *clk)
+-{
+-	unsigned long cksel, shift = 0;
+-
+-	cksel = pm_readl(CKSEL);
+-	if (cksel & PM_BIT(PBBDIV))
+-		shift = PM_BFEXT(PBBSEL, cksel) + 1;
+-
+-	return bus_clk_get_rate(clk, shift);
+-}
+-
+-static struct clk cpu_clk = {
+-	.name		= "cpu",
+-	.get_rate	= cpu_clk_get_rate,
+-	.set_rate	= cpu_clk_set_rate,
+-	.users		= 1,
+-};
+-static struct clk hsb_clk = {
+-	.name		= "hsb",
+-	.parent		= &cpu_clk,
+-	.get_rate	= hsb_clk_get_rate,
+-};
+-static struct clk pba_clk = {
+-	.name		= "pba",
+-	.parent		= &hsb_clk,
+-	.mode		= hsb_clk_mode,
+-	.get_rate	= pba_clk_get_rate,
+-	.index		= 1,
+-};
+-static struct clk pbb_clk = {
+-	.name		= "pbb",
+-	.parent		= &hsb_clk,
+-	.mode		= hsb_clk_mode,
+-	.get_rate	= pbb_clk_get_rate,
+-	.users		= 1,
+-	.index		= 2,
+-};
+-
+-/* --------------------------------------------------------------------
+- *  Generic Clock operations
+- * -------------------------------------------------------------------- */
+-
+-static void genclk_mode(struct clk *clk, int enabled)
+-{
+-	u32 control;
+-
+-	control = pm_readl(GCCTRL(clk->index));
+-	if (enabled)
+-		control |= PM_BIT(CEN);
+-	else
+-		control &= ~PM_BIT(CEN);
+-	pm_writel(GCCTRL(clk->index), control);
+-}
+-
+-static unsigned long genclk_get_rate(struct clk *clk)
+-{
+-	u32 control;
+-	unsigned long div = 1;
+-
+-	control = pm_readl(GCCTRL(clk->index));
+-	if (control & PM_BIT(DIVEN))
+-		div = 2 * (PM_BFEXT(DIV, control) + 1);
+-
+-	return clk->parent->get_rate(clk->parent) / div;
+-}
+-
+-static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
+-{
+-	u32 control;
+-	unsigned long parent_rate, actual_rate, div;
+-
+-	parent_rate = clk->parent->get_rate(clk->parent);
+-	control = pm_readl(GCCTRL(clk->index));
+-
+-	if (rate > 3 * parent_rate / 4) {
+-		actual_rate = parent_rate;
+-		control &= ~PM_BIT(DIVEN);
+-	} else {
+-		div = (parent_rate + rate) / (2 * rate) - 1;
+-		control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
+-		actual_rate = parent_rate / (2 * (div + 1));
+-	}
+-
+-	dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
+-		clk->name, rate, actual_rate);
+-
+-	if (apply)
+-		pm_writel(GCCTRL(clk->index), control);
+-
+-	return actual_rate;
+-}
+-
+-int genclk_set_parent(struct clk *clk, struct clk *parent)
+-{
+-	u32 control;
+-
+-	dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
+-		clk->name, parent->name, clk->parent->name);
+-
+-	control = pm_readl(GCCTRL(clk->index));
+-
+-	if (parent == &osc1 || parent == &pll1)
+-		control |= PM_BIT(OSCSEL);
+-	else if (parent == &osc0 || parent == &pll0)
+-		control &= ~PM_BIT(OSCSEL);
+-	else
+-		return -EINVAL;
+-
+-	if (parent == &pll0 || parent == &pll1)
+-		control |= PM_BIT(PLLSEL);
+-	else
+-		control &= ~PM_BIT(PLLSEL);
+-
+-	pm_writel(GCCTRL(clk->index), control);
+-	clk->parent = parent;
+-
+-	return 0;
+-}
+-
+-static void __init genclk_init_parent(struct clk *clk)
+-{
+-	u32 control;
+-	struct clk *parent;
+-
+-	BUG_ON(clk->index > 7);
+-
+-	control = pm_readl(GCCTRL(clk->index));
+-	if (control & PM_BIT(OSCSEL))
+-		parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
+-	else
+-		parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
+-
+-	clk->parent = parent;
+-}
+-
+-/* --------------------------------------------------------------------
+- *  System peripherals
+- * -------------------------------------------------------------------- */
+-static struct resource at32_pm0_resource[] = {
+-	{
+-		.start	= 0xfff00000,
+-		.end	= 0xfff0007f,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	IRQ(20),
+-};
+-
+-static struct resource at32ap700x_rtc0_resource[] = {
+-	{
+-		.start	= 0xfff00080,
+-		.end	= 0xfff000af,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	IRQ(21),
+-};
+-
+-static struct resource at32_wdt0_resource[] = {
+-	{
+-		.start	= 0xfff000b0,
+-		.end	= 0xfff000bf,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-};
+-
+-static struct resource at32_eic0_resource[] = {
+-	{
+-		.start	= 0xfff00100,
+-		.end	= 0xfff0013f,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	IRQ(19),
+-};
+-
+-DEFINE_DEV(at32_pm, 0);
+-DEFINE_DEV(at32ap700x_rtc, 0);
+-DEFINE_DEV(at32_wdt, 0);
+-DEFINE_DEV(at32_eic, 0);
+-
+-/*
+- * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
+- * is always running.
+- */
+-static struct clk at32_pm_pclk = {
+-	.name		= "pclk",
+-	.dev		= &at32_pm0_device.dev,
+-	.parent		= &pbb_clk,
+-	.mode		= pbb_clk_mode,
+-	.get_rate	= pbb_clk_get_rate,
+-	.users		= 1,
+-	.index		= 0,
+-};
+-
+-static struct resource intc0_resource[] = {
+-	PBMEM(0xfff00400),
+-};
+-struct platform_device at32_intc0_device = {
+-	.name		= "intc",
+-	.id		= 0,
+-	.resource	= intc0_resource,
+-	.num_resources	= ARRAY_SIZE(intc0_resource),
+-};
+-DEV_CLK(pclk, at32_intc0, pbb, 1);
+-
+-static struct clk ebi_clk = {
+-	.name		= "ebi",
+-	.parent		= &hsb_clk,
+-	.mode		= hsb_clk_mode,
+-	.get_rate	= hsb_clk_get_rate,
+-	.users		= 1,
+-};
+-static struct clk hramc_clk = {
+-	.name		= "hramc",
+-	.parent		= &hsb_clk,
+-	.mode		= hsb_clk_mode,
+-	.get_rate	= hsb_clk_get_rate,
+-	.users		= 1,
+-	.index		= 3,
+-};
+-
+-static struct resource smc0_resource[] = {
+-	PBMEM(0xfff03400),
+-};
+-DEFINE_DEV(smc, 0);
+-DEV_CLK(pclk, smc0, pbb, 13);
+-DEV_CLK(mck, smc0, hsb, 0);
+-
+-static struct platform_device pdc_device = {
+-	.name		= "pdc",
+-	.id		= 0,
+-};
+-DEV_CLK(hclk, pdc, hsb, 4);
+-DEV_CLK(pclk, pdc, pba, 16);
+-
+-static struct clk pico_clk = {
+-	.name		= "pico",
+-	.parent		= &cpu_clk,
+-	.mode		= cpu_clk_mode,
+-	.get_rate	= cpu_clk_get_rate,
+-	.users		= 1,
+-};
+-
+-/* --------------------------------------------------------------------
+- * HMATRIX
+- * -------------------------------------------------------------------- */
+-
+-static struct clk hmatrix_clk = {
+-	.name		= "hmatrix_clk",
+-	.parent		= &pbb_clk,
+-	.mode		= pbb_clk_mode,
+-	.get_rate	= pbb_clk_get_rate,
+-	.index		= 2,
+-	.users		= 1,
+-};
+-#define HMATRIX_BASE	((void __iomem *)0xfff00800)
+-
+-#define hmatrix_readl(reg)					\
+-	__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
+-#define hmatrix_writel(reg,value)				\
+-	__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
+-
+-/*
+- * Set bits in the HMATRIX Special Function Register (SFR) used by the
+- * External Bus Interface (EBI). This can be used to enable special
+- * features like CompactFlash support, NAND Flash support, etc. on
+- * certain chipselects.
+- */
+-static inline void set_ebi_sfr_bits(u32 mask)
+-{
+-	u32 sfr;
+-
+-	clk_enable(&hmatrix_clk);
+-	sfr = hmatrix_readl(SFR4);
+-	sfr |= mask;
+-	hmatrix_writel(SFR4, sfr);
+-	clk_disable(&hmatrix_clk);
+-}
+-
+-/* --------------------------------------------------------------------
+- *  System Timer/Counter (TC)
+- * -------------------------------------------------------------------- */
+-static struct resource at32_systc0_resource[] = {
+-	PBMEM(0xfff00c00),
+-	IRQ(22),
+-};
+-struct platform_device at32_systc0_device = {
+-	.name		= "systc",
+-	.id		= 0,
+-	.resource	= at32_systc0_resource,
+-	.num_resources	= ARRAY_SIZE(at32_systc0_resource),
+-};
+-DEV_CLK(pclk, at32_systc0, pbb, 3);
+-
+-/* --------------------------------------------------------------------
+- *  PIO
+- * -------------------------------------------------------------------- */
+-
+-static struct resource pio0_resource[] = {
+-	PBMEM(0xffe02800),
+-	IRQ(13),
+-};
+-DEFINE_DEV(pio, 0);
+-DEV_CLK(mck, pio0, pba, 10);
+-
+-static struct resource pio1_resource[] = {
+-	PBMEM(0xffe02c00),
+-	IRQ(14),
+-};
+-DEFINE_DEV(pio, 1);
+-DEV_CLK(mck, pio1, pba, 11);
+-
+-static struct resource pio2_resource[] = {
+-	PBMEM(0xffe03000),
+-	IRQ(15),
+-};
+-DEFINE_DEV(pio, 2);
+-DEV_CLK(mck, pio2, pba, 12);
+-
+-static struct resource pio3_resource[] = {
+-	PBMEM(0xffe03400),
+-	IRQ(16),
+-};
+-DEFINE_DEV(pio, 3);
+-DEV_CLK(mck, pio3, pba, 13);
+-
+-static struct resource pio4_resource[] = {
+-	PBMEM(0xffe03800),
+-	IRQ(17),
+-};
+-DEFINE_DEV(pio, 4);
+-DEV_CLK(mck, pio4, pba, 14);
+-
+-void __init at32_add_system_devices(void)
+-{
+-	platform_device_register(&at32_pm0_device);
+-	platform_device_register(&at32_intc0_device);
+-	platform_device_register(&at32ap700x_rtc0_device);
+-	platform_device_register(&at32_wdt0_device);
+-	platform_device_register(&at32_eic0_device);
+-	platform_device_register(&smc0_device);
+-	platform_device_register(&pdc_device);
+-
+-	platform_device_register(&at32_systc0_device);
+-
+-	platform_device_register(&pio0_device);
+-	platform_device_register(&pio1_device);
+-	platform_device_register(&pio2_device);
+-	platform_device_register(&pio3_device);
+-	platform_device_register(&pio4_device);
+-}
+-
+-/* --------------------------------------------------------------------
+- *  USART
+- * -------------------------------------------------------------------- */
+-
+-static struct atmel_uart_data atmel_usart0_data = {
+-	.use_dma_tx	= 1,
+-	.use_dma_rx	= 1,
+-};
+-static struct resource atmel_usart0_resource[] = {
+-	PBMEM(0xffe00c00),
+-	IRQ(6),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 0);
+-DEV_CLK(usart, atmel_usart0, pba, 4);
+-
+-static struct atmel_uart_data atmel_usart1_data = {
+-	.use_dma_tx	= 1,
+-	.use_dma_rx	= 1,
+-};
+-static struct resource atmel_usart1_resource[] = {
+-	PBMEM(0xffe01000),
+-	IRQ(7),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 1);
+-DEV_CLK(usart, atmel_usart1, pba, 4);
+-
+-static struct atmel_uart_data atmel_usart2_data = {
+-	.use_dma_tx	= 1,
+-	.use_dma_rx	= 1,
+-};
+-static struct resource atmel_usart2_resource[] = {
+-	PBMEM(0xffe01400),
+-	IRQ(8),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 2);
+-DEV_CLK(usart, atmel_usart2, pba, 5);
+-
+-static struct atmel_uart_data atmel_usart3_data = {
+-	.use_dma_tx	= 1,
+-	.use_dma_rx	= 1,
+-};
+-static struct resource atmel_usart3_resource[] = {
+-	PBMEM(0xffe01800),
+-	IRQ(9),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 3);
+-DEV_CLK(usart, atmel_usart3, pba, 6);
+-
+-static inline void configure_usart0_pins(void)
+-{
+-	select_peripheral(PA(8),  PERIPH_B, 0);	/* RXD	*/
+-	select_peripheral(PA(9),  PERIPH_B, 0);	/* TXD	*/
+-}
+-
+-static inline void configure_usart1_pins(void)
+-{
+-	select_peripheral(PA(17), PERIPH_A, 0);	/* RXD	*/
+-	select_peripheral(PA(18), PERIPH_A, 0);	/* TXD	*/
+-}
+-
+-static inline void configure_usart2_pins(void)
+-{
+-	select_peripheral(PB(26), PERIPH_B, 0);	/* RXD	*/
+-	select_peripheral(PB(27), PERIPH_B, 0);	/* TXD	*/
+-}
+-
+-static inline void configure_usart3_pins(void)
+-{
+-	select_peripheral(PB(18), PERIPH_B, 0);	/* RXD	*/
+-	select_peripheral(PB(17), PERIPH_B, 0);	/* TXD	*/
+-}
+-
+-static struct platform_device *__initdata at32_usarts[4];
+-
+-void __init at32_map_usart(unsigned int hw_id, unsigned int line)
+-{
+-	struct platform_device *pdev;
+-
+-	switch (hw_id) {
+-	case 0:
+-		pdev = &atmel_usart0_device;
+-		configure_usart0_pins();
+-		break;
+-	case 1:
+-		pdev = &atmel_usart1_device;
+-		configure_usart1_pins();
+-		break;
+-	case 2:
+-		pdev = &atmel_usart2_device;
+-		configure_usart2_pins();
+-		break;
+-	case 3:
+-		pdev = &atmel_usart3_device;
+-		configure_usart3_pins();
+-		break;
+-	default:
+-		return;
+-	}
+-
+-	if (PXSEG(pdev->resource[0].start) == P4SEG) {
+-		/* Addresses in the P4 segment are permanently mapped 1:1 */
+-		struct atmel_uart_data *data = pdev->dev.platform_data;
+-		data->regs = (void __iomem *)pdev->resource[0].start;
+-	}
+-
+-	pdev->id = line;
+-	at32_usarts[line] = pdev;
+-}
+-
+-struct platform_device *__init at32_add_device_usart(unsigned int id)
+-{
+-	platform_device_register(at32_usarts[id]);
+-	return at32_usarts[id];
+-}
+-
+-struct platform_device *atmel_default_console_device;
+-
+-void __init at32_setup_serial_console(unsigned int usart_id)
+-{
+-	atmel_default_console_device = at32_usarts[usart_id];
+-}
+-
+-/* --------------------------------------------------------------------
+- *  Ethernet
+- * -------------------------------------------------------------------- */
+-
+-static struct eth_platform_data macb0_data;
+-static struct resource macb0_resource[] = {
+-	PBMEM(0xfff01800),
+-	IRQ(25),
+-};
+-DEFINE_DEV_DATA(macb, 0);
+-DEV_CLK(hclk, macb0, hsb, 8);
+-DEV_CLK(pclk, macb0, pbb, 6);
+-
+-static struct eth_platform_data macb1_data;
+-static struct resource macb1_resource[] = {
+-	PBMEM(0xfff01c00),
+-	IRQ(26),
+-};
+-DEFINE_DEV_DATA(macb, 1);
+-DEV_CLK(hclk, macb1, hsb, 9);
+-DEV_CLK(pclk, macb1, pbb, 7);
+-
+-struct platform_device *__init
+-at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
+-{
+-	struct platform_device *pdev;
+-
+-	switch (id) {
+-	case 0:
+-		pdev = &macb0_device;
+-
+-		select_peripheral(PC(3),  PERIPH_A, 0);	/* TXD0	*/
+-		select_peripheral(PC(4),  PERIPH_A, 0);	/* TXD1	*/
+-		select_peripheral(PC(7),  PERIPH_A, 0);	/* TXEN	*/
+-		select_peripheral(PC(8),  PERIPH_A, 0);	/* TXCK */
+-		select_peripheral(PC(9),  PERIPH_A, 0);	/* RXD0	*/
+-		select_peripheral(PC(10), PERIPH_A, 0);	/* RXD1	*/
+-		select_peripheral(PC(13), PERIPH_A, 0);	/* RXER	*/
+-		select_peripheral(PC(15), PERIPH_A, 0);	/* RXDV	*/
+-		select_peripheral(PC(16), PERIPH_A, 0);	/* MDC	*/
+-		select_peripheral(PC(17), PERIPH_A, 0);	/* MDIO	*/
+-
+-		if (!data->is_rmii) {
+-			select_peripheral(PC(0),  PERIPH_A, 0);	/* COL	*/
+-			select_peripheral(PC(1),  PERIPH_A, 0);	/* CRS	*/
+-			select_peripheral(PC(2),  PERIPH_A, 0);	/* TXER	*/
+-			select_peripheral(PC(5),  PERIPH_A, 0);	/* TXD2	*/
+-			select_peripheral(PC(6),  PERIPH_A, 0);	/* TXD3 */
+-			select_peripheral(PC(11), PERIPH_A, 0);	/* RXD2	*/
+-			select_peripheral(PC(12), PERIPH_A, 0);	/* RXD3	*/
+-			select_peripheral(PC(14), PERIPH_A, 0);	/* RXCK	*/
+-			select_peripheral(PC(18), PERIPH_A, 0);	/* SPD	*/
+-		}
+-		break;
+-
+-	case 1:
+-		pdev = &macb1_device;
+-
+-		select_peripheral(PD(13), PERIPH_B, 0);		/* TXD0	*/
+-		select_peripheral(PD(14), PERIPH_B, 0);		/* TXD1	*/
+-		select_peripheral(PD(11), PERIPH_B, 0);		/* TXEN	*/
+-		select_peripheral(PD(12), PERIPH_B, 0);		/* TXCK */
+-		select_peripheral(PD(10), PERIPH_B, 0);		/* RXD0	*/
+-		select_peripheral(PD(6),  PERIPH_B, 0);		/* RXD1	*/
+-		select_peripheral(PD(5),  PERIPH_B, 0);		/* RXER	*/
+-		select_peripheral(PD(4),  PERIPH_B, 0);		/* RXDV	*/
+-		select_peripheral(PD(3),  PERIPH_B, 0);		/* MDC	*/
+-		select_peripheral(PD(2),  PERIPH_B, 0);		/* MDIO	*/
+-
+-		if (!data->is_rmii) {
+-			select_peripheral(PC(19), PERIPH_B, 0);	/* COL	*/
+-			select_peripheral(PC(23), PERIPH_B, 0);	/* CRS	*/
+-			select_peripheral(PC(26), PERIPH_B, 0);	/* TXER	*/
+-			select_peripheral(PC(27), PERIPH_B, 0);	/* TXD2	*/
+-			select_peripheral(PC(28), PERIPH_B, 0);	/* TXD3 */
+-			select_peripheral(PC(29), PERIPH_B, 0);	/* RXD2	*/
+-			select_peripheral(PC(30), PERIPH_B, 0);	/* RXD3	*/
+-			select_peripheral(PC(24), PERIPH_B, 0);	/* RXCK	*/
+-			select_peripheral(PD(15), PERIPH_B, 0);	/* SPD	*/
+-		}
+-		break;
+-
+-	default:
+-		return NULL;
+-	}
+-
+-	memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
+-	platform_device_register(pdev);
+-
+-	return pdev;
+-}
+-
+-/* --------------------------------------------------------------------
+- *  SPI
+- * -------------------------------------------------------------------- */
+-static struct resource atmel_spi0_resource[] = {
+-	PBMEM(0xffe00000),
+-	IRQ(3),
+-};
+-DEFINE_DEV(atmel_spi, 0);
+-DEV_CLK(spi_clk, atmel_spi0, pba, 0);
+-
+-static struct resource atmel_spi1_resource[] = {
+-	PBMEM(0xffe00400),
+-	IRQ(4),
+-};
+-DEFINE_DEV(atmel_spi, 1);
+-DEV_CLK(spi_clk, atmel_spi1, pba, 1);
+-
+-static void __init
+-at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
+-		      unsigned int n, const u8 *pins)
+-{
+-	unsigned int pin, mode;
+-
+-	for (; n; n--, b++) {
+-		b->bus_num = bus_num;
+-		if (b->chip_select >= 4)
+-			continue;
+-		pin = (unsigned)b->controller_data;
+-		if (!pin) {
+-			pin = pins[b->chip_select];
+-			b->controller_data = (void *)pin;
+-		}
+-		mode = AT32_GPIOF_OUTPUT;
+-		if (!(b->mode & SPI_CS_HIGH))
+-			mode |= AT32_GPIOF_HIGH;
+-		at32_select_gpio(pin, mode);
+-	}
+-}
+-
+-struct platform_device *__init
+-at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+-{
+-	/*
+-	 * Manage the chipselects as GPIOs, normally using the same pins
+-	 * the SPI controller expects; but boards can use other pins.
+-	 */
+-	static u8 __initdata spi0_pins[] =
+-		{ GPIO_PIN_PA(3), GPIO_PIN_PA(4),
+-		  GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
+-	static u8 __initdata spi1_pins[] =
+-		{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
+-		  GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
+-	struct platform_device *pdev;
+-
+-	switch (id) {
+-	case 0:
+-		pdev = &atmel_spi0_device;
+-		select_peripheral(PA(0),  PERIPH_A, 0);	/* MISO	 */
+-		select_peripheral(PA(1),  PERIPH_A, 0);	/* MOSI	 */
+-		select_peripheral(PA(2),  PERIPH_A, 0);	/* SCK	 */
+-		at32_spi_setup_slaves(0, b, n, spi0_pins);
+-		break;
+-
+-	case 1:
+-		pdev = &atmel_spi1_device;
+-		select_peripheral(PB(0),  PERIPH_B, 0);	/* MISO  */
+-		select_peripheral(PB(1),  PERIPH_B, 0);	/* MOSI  */
+-		select_peripheral(PB(5),  PERIPH_B, 0);	/* SCK   */
+-		at32_spi_setup_slaves(1, b, n, spi1_pins);
+-		break;
+-
+-	default:
+-		return NULL;
+-	}
+-
+-	spi_register_board_info(b, n);
+-	platform_device_register(pdev);
+-	return pdev;
+-}
+-
+-/* --------------------------------------------------------------------
+- *  LCDC
+- * -------------------------------------------------------------------- */
+-static struct atmel_lcdfb_info atmel_lcdfb0_data;
+-static struct resource atmel_lcdfb0_resource[] = {
+-	{
+-		.start		= 0xff000000,
+-		.end		= 0xff000fff,
+-		.flags		= IORESOURCE_MEM,
+-	},
+-	IRQ(1),
+-	{
+-		/* Placeholder for pre-allocated fb memory */
+-		.start		= 0x00000000,
+-		.end		= 0x00000000,
+-		.flags		= 0,
+-	},
+-};
+-DEFINE_DEV_DATA(atmel_lcdfb, 0);
+-DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
+-static struct clk atmel_lcdfb0_pixclk = {
+-	.name		= "lcdc_clk",
+-	.dev		= &atmel_lcdfb0_device.dev,
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 7,
+-};
+-
+-struct platform_device *__init
+-at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+-		     unsigned long fbmem_start, unsigned long fbmem_len)
+-{
+-	struct platform_device *pdev;
+-	struct atmel_lcdfb_info *info;
+-	struct fb_monspecs *monspecs;
+-	struct fb_videomode *modedb;
+-	unsigned int modedb_size;
+-
+-	/*
+-	 * Do a deep copy of the fb data, monspecs and modedb. Make
+-	 * sure all allocations are done before setting up the
+-	 * portmux.
+-	 */
+-	monspecs = kmemdup(data->default_monspecs,
+-			   sizeof(struct fb_monspecs), GFP_KERNEL);
+-	if (!monspecs)
+-		return NULL;
+-
+-	modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
+-	modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
+-	if (!modedb)
+-		goto err_dup_modedb;
+-	monspecs->modedb = modedb;
+-
+-	switch (id) {
+-	case 0:
+-		pdev = &atmel_lcdfb0_device;
+-		select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
+-		select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
+-		select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
+-		select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
+-		select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
+-		select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
+-		select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
+-		select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
+-		select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
+-		select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
+-		select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
+-		select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
+-		select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
+-		select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
+-		select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
+-		select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
+-		select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
+-		select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
+-		select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
+-		select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
+-		select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
+-		select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
+-		select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
+-		select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
+-		select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
+-		select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
+-		select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
+-		select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
+-		select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
+-		select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
+-		select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
+-
+-		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
+-		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
+-		break;
+-
+-	default:
+-		goto err_invalid_id;
+-	}
+-
+-	if (fbmem_len) {
+-		pdev->resource[2].start = fbmem_start;
+-		pdev->resource[2].end = fbmem_start + fbmem_len - 1;
+-		pdev->resource[2].flags = IORESOURCE_MEM;
+-	}
+-
+-	info = pdev->dev.platform_data;
+-	memcpy(info, data, sizeof(struct atmel_lcdfb_info));
+-	info->default_monspecs = monspecs;
+-
+-	platform_device_register(pdev);
+-	return pdev;
+-
+-err_invalid_id:
+-	kfree(modedb);
+-err_dup_modedb:
+-	kfree(monspecs);
+-	return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- *  SSC
+- * -------------------------------------------------------------------- */
+-static struct resource ssc0_resource[] = {
+-	PBMEM(0xffe01c00),
+-	IRQ(10),
+-};
+-DEFINE_DEV(ssc, 0);
+-DEV_CLK(pclk, ssc0, pba, 7);
+-
+-static struct resource ssc1_resource[] = {
+-	PBMEM(0xffe02000),
+-	IRQ(11),
+-};
+-DEFINE_DEV(ssc, 1);
+-DEV_CLK(pclk, ssc1, pba, 8);
+-
+-static struct resource ssc2_resource[] = {
+-	PBMEM(0xffe02400),
+-	IRQ(12),
+-};
+-DEFINE_DEV(ssc, 2);
+-DEV_CLK(pclk, ssc2, pba, 9);
+-
+-struct platform_device *__init
+-at32_add_device_ssc(unsigned int id, unsigned int flags)
+-{
+-	struct platform_device *pdev;
+-
+-	switch (id) {
+-	case 0:
+-		pdev = &ssc0_device;
+-		if (flags & ATMEL_SSC_RF)
+-			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
+-		if (flags & ATMEL_SSC_RK)
+-			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
+-		if (flags & ATMEL_SSC_TK)
+-			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
+-		if (flags & ATMEL_SSC_TF)
+-			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
+-		if (flags & ATMEL_SSC_TD)
+-			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
+-		if (flags & ATMEL_SSC_RD)
+-			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
+-		break;
+-	case 1:
+-		pdev = &ssc1_device;
+-		if (flags & ATMEL_SSC_RF)
+-			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
+-		if (flags & ATMEL_SSC_RK)
+-			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
+-		if (flags & ATMEL_SSC_TK)
+-			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
+-		if (flags & ATMEL_SSC_TF)
+-			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
+-		if (flags & ATMEL_SSC_TD)
+-			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
+-		if (flags & ATMEL_SSC_RD)
+-			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
+-		break;
+-	case 2:
+-		pdev = &ssc2_device;
+-		if (flags & ATMEL_SSC_TD)
+-			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
+-		if (flags & ATMEL_SSC_RD)
+-			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
+-		if (flags & ATMEL_SSC_TK)
+-			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
+-		if (flags & ATMEL_SSC_TF)
+-			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
+-		if (flags & ATMEL_SSC_RF)
+-			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
+-		if (flags & ATMEL_SSC_RK)
+-			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
+-		break;
+-	default:
+-		return NULL;
+-	}
+-
+-	platform_device_register(pdev);
+-	return pdev;
+-}
+-
+-/* --------------------------------------------------------------------
+- *  GCLK
+- * -------------------------------------------------------------------- */
+-static struct clk gclk0 = {
+-	.name		= "gclk0",
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 0,
+-};
+-static struct clk gclk1 = {
+-	.name		= "gclk1",
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 1,
+-};
+-static struct clk gclk2 = {
+-	.name		= "gclk2",
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 2,
+-};
+-static struct clk gclk3 = {
+-	.name		= "gclk3",
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 3,
+-};
+-static struct clk gclk4 = {
+-	.name		= "gclk4",
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 4,
+-};
+-
+-struct clk *at32_clock_list[] = {
+-	&osc32k,
+-	&osc0,
+-	&osc1,
+-	&pll0,
+-	&pll1,
+-	&cpu_clk,
+-	&hsb_clk,
+-	&pba_clk,
+-	&pbb_clk,
+-	&at32_pm_pclk,
+-	&at32_intc0_pclk,
+-	&hmatrix_clk,
+-	&ebi_clk,
+-	&hramc_clk,
+-	&smc0_pclk,
+-	&smc0_mck,
+-	&pdc_hclk,
+-	&pdc_pclk,
+-	&pico_clk,
+-	&pio0_mck,
+-	&pio1_mck,
+-	&pio2_mck,
+-	&pio3_mck,
+-	&pio4_mck,
+-	&at32_systc0_pclk,
+-	&atmel_usart0_usart,
+-	&atmel_usart1_usart,
+-	&atmel_usart2_usart,
+-	&atmel_usart3_usart,
+-	&macb0_hclk,
+-	&macb0_pclk,
+-	&macb1_hclk,
+-	&macb1_pclk,
+-	&atmel_spi0_spi_clk,
+-	&atmel_spi1_spi_clk,
+-	&atmel_lcdfb0_hck1,
+-	&atmel_lcdfb0_pixclk,
+-	&ssc0_pclk,
+-	&ssc1_pclk,
+-	&ssc2_pclk,
+-	&gclk0,
+-	&gclk1,
+-	&gclk2,
+-	&gclk3,
+-	&gclk4,
+-};
+-unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
+-
+-void __init at32_portmux_init(void)
+-{
+-	at32_init_pio(&pio0_device);
+-	at32_init_pio(&pio1_device);
+-	at32_init_pio(&pio2_device);
+-	at32_init_pio(&pio3_device);
+-	at32_init_pio(&pio4_device);
+-}
+-
+-void __init at32_clock_init(void)
+-{
+-	u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
+-	int i;
+-
+-	if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
+-		main_clock = &pll0;
+-		cpu_clk.parent = &pll0;
+-	} else {
+-		main_clock = &osc0;
+-		cpu_clk.parent = &osc0;
+-	}
+-
+-	if (pm_readl(PLL0) & PM_BIT(PLLOSC))
+-		pll0.parent = &osc1;
+-	if (pm_readl(PLL1) & PM_BIT(PLLOSC))
+-		pll1.parent = &osc1;
+-
+-	genclk_init_parent(&gclk0);
+-	genclk_init_parent(&gclk1);
+-	genclk_init_parent(&gclk2);
+-	genclk_init_parent(&gclk3);
+-	genclk_init_parent(&gclk4);
+-	genclk_init_parent(&atmel_lcdfb0_pixclk);
+-
+-	/*
+-	 * Turn on all clocks that have at least one user already, and
+-	 * turn off everything else. We only do this for module
+-	 * clocks, and even though it isn't particularly pretty to
+-	 * check the address of the mode function, it should do the
+-	 * trick...
+-	 */
+-	for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
+-		struct clk *clk = at32_clock_list[i];
+-
+-		if (clk->users == 0)
+-			continue;
+-
+-		if (clk->mode == &cpu_clk_mode)
+-			cpu_mask |= 1 << clk->index;
+-		else if (clk->mode == &hsb_clk_mode)
+-			hsb_mask |= 1 << clk->index;
+-		else if (clk->mode == &pba_clk_mode)
+-			pba_mask |= 1 << clk->index;
+-		else if (clk->mode == &pbb_clk_mode)
+-			pbb_mask |= 1 << clk->index;
+-	}
+-
+-	pm_writel(CPU_MASK, cpu_mask);
+-	pm_writel(HSB_MASK, hsb_mask);
+-	pm_writel(PBA_MASK, pba_mask);
+-	pm_writel(PBB_MASK, pbb_mask);
+-}
+diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
+new file mode 100644
+index 0000000..7fd93a5
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/at32ap700x.c
+@@ -0,0 +1,1754 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
++#include <linux/spi/spi.h>
++
++#include <asm/io.h>
++
++#include <asm/arch/at32ap700x.h>
++#include <asm/arch/board.h>
++#include <asm/arch/portmux.h>
++
++#include <video/atmel_lcdc.h>
++
++#include "clock.h"
++#include "hmatrix.h"
++#include "pio.h"
++#include "pm.h"
++
++
++#define PBMEM(base)					\
++	{						\
++		.start		= base,			\
++		.end		= base + 0x3ff,		\
++		.flags		= IORESOURCE_MEM,	\
++	}
++#define IRQ(num)					\
++	{						\
++		.start		= num,			\
++		.end		= num,			\
++		.flags		= IORESOURCE_IRQ,	\
++	}
++#define NAMED_IRQ(num, _name)				\
++	{						\
++		.start		= num,			\
++		.end		= num,			\
++		.name		= _name,		\
++		.flags		= IORESOURCE_IRQ,	\
++	}
++
++/* REVISIT these assume *every* device supports DMA, but several
++ * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
++ */
++#define DEFINE_DEV(_name, _id)					\
++static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
++static struct platform_device _name##_id##_device = {		\
++	.name		= #_name,				\
++	.id		= _id,					\
++	.dev		= {					\
++		.dma_mask = &_name##_id##_dma_mask,		\
++		.coherent_dma_mask = DMA_32BIT_MASK,		\
++	},							\
++	.resource	= _name##_id##_resource,		\
++	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
++}
++#define DEFINE_DEV_DATA(_name, _id)				\
++static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
++static struct platform_device _name##_id##_device = {		\
++	.name		= #_name,				\
++	.id		= _id,					\
++	.dev		= {					\
++		.dma_mask = &_name##_id##_dma_mask,		\
++		.platform_data	= &_name##_id##_data,		\
++		.coherent_dma_mask = DMA_32BIT_MASK,		\
++	},							\
++	.resource	= _name##_id##_resource,		\
++	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
++}
++
++#define select_peripheral(pin, periph, flags)			\
++	at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
++
++#define DEV_CLK(_name, devname, bus, _index)			\
++static struct clk devname##_##_name = {				\
++	.name		= #_name,				\
++	.dev		= &devname##_device.dev,		\
++	.parent		= &bus##_clk,				\
++	.mode		= bus##_clk_mode,			\
++	.get_rate	= bus##_clk_get_rate,			\
++	.index		= _index,				\
++}
++
++static DEFINE_SPINLOCK(pm_lock);
++
++unsigned long at32ap7000_osc_rates[3] = {
++	[0] = 32768,
++	/* FIXME: these are ATSTK1002-specific */
++	[1] = 20000000,
++	[2] = 12000000,
++};
++
++static unsigned long osc_get_rate(struct clk *clk)
++{
++	return at32ap7000_osc_rates[clk->index];
++}
++
++static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
++{
++	unsigned long div, mul, rate;
++
++	if (!(control & PM_BIT(PLLEN)))
++		return 0;
++
++	div = PM_BFEXT(PLLDIV, control) + 1;
++	mul = PM_BFEXT(PLLMUL, control) + 1;
++
++	rate = clk->parent->get_rate(clk->parent);
++	rate = (rate + div / 2) / div;
++	rate *= mul;
++
++	return rate;
++}
++
++static unsigned long pll0_get_rate(struct clk *clk)
++{
++	u32 control;
++
++	control = pm_readl(PLL0);
++
++	return pll_get_rate(clk, control);
++}
++
++static unsigned long pll1_get_rate(struct clk *clk)
++{
++	u32 control;
++
++	control = pm_readl(PLL1);
++
++	return pll_get_rate(clk, control);
++}
++
++/*
++ * The AT32AP7000 has five primary clock sources: One 32kHz
++ * oscillator, two crystal oscillators and two PLLs.
++ */
++static struct clk osc32k = {
++	.name		= "osc32k",
++	.get_rate	= osc_get_rate,
++	.users		= 1,
++	.index		= 0,
++};
++static struct clk osc0 = {
++	.name		= "osc0",
++	.get_rate	= osc_get_rate,
++	.users		= 1,
++	.index		= 1,
++};
++static struct clk osc1 = {
++	.name		= "osc1",
++	.get_rate	= osc_get_rate,
++	.index		= 2,
++};
++static struct clk pll0 = {
++	.name		= "pll0",
++	.get_rate	= pll0_get_rate,
++	.parent		= &osc0,
++};
++static struct clk pll1 = {
++	.name		= "pll1",
++	.get_rate	= pll1_get_rate,
++	.parent		= &osc0,
++};
++
++/*
++ * The main clock can be either osc0 or pll0.  The boot loader may
++ * have chosen one for us, so we don't really know which one until we
++ * have a look at the SM.
++ */
++static struct clk *main_clock;
++
++/*
++ * Synchronous clocks are generated from the main clock. The clocks
++ * must satisfy the constraint
++ *   fCPU >= fHSB >= fPB
++ * i.e. each clock must not be faster than its parent.
++ */
++static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
++{
++	return main_clock->get_rate(main_clock) >> shift;
++};
++
++static void cpu_clk_mode(struct clk *clk, int enabled)
++{
++	unsigned long flags;
++	u32 mask;
++
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(CPU_MASK);
++	if (enabled)
++		mask |= 1 << clk->index;
++	else
++		mask &= ~(1 << clk->index);
++	pm_writel(CPU_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long cpu_clk_get_rate(struct clk *clk)
++{
++	unsigned long cksel, shift = 0;
++
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(CPUDIV))
++		shift = PM_BFEXT(CPUSEL, cksel) + 1;
++
++	return bus_clk_get_rate(clk, shift);
++}
++
++static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
++{
++	u32 control;
++	unsigned long parent_rate, child_div, actual_rate, div;
++
++	parent_rate = clk->parent->get_rate(clk->parent);
++	control = pm_readl(CKSEL);
++
++	if (control & PM_BIT(HSBDIV))
++		child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
++	else
++		child_div = 1;
++
++	if (rate > 3 * (parent_rate / 4) || child_div == 1) {
++		actual_rate = parent_rate;
++		control &= ~PM_BIT(CPUDIV);
++	} else {
++		unsigned int cpusel;
++		div = (parent_rate + rate / 2) / rate;
++		if (div > child_div)
++			div = child_div;
++		cpusel = (div > 1) ? (fls(div) - 2) : 0;
++		control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
++		actual_rate = parent_rate / (1 << (cpusel + 1));
++	}
++
++	pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
++			clk->name, rate, actual_rate);
++
++	if (apply)
++		pm_writel(CKSEL, control);
++
++	return actual_rate;
++}
++
++static void hsb_clk_mode(struct clk *clk, int enabled)
++{
++	unsigned long flags;
++	u32 mask;
++
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(HSB_MASK);
++	if (enabled)
++		mask |= 1 << clk->index;
++	else
++		mask &= ~(1 << clk->index);
++	pm_writel(HSB_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long hsb_clk_get_rate(struct clk *clk)
++{
++	unsigned long cksel, shift = 0;
++
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(HSBDIV))
++		shift = PM_BFEXT(HSBSEL, cksel) + 1;
++
++	return bus_clk_get_rate(clk, shift);
++}
++
++static void pba_clk_mode(struct clk *clk, int enabled)
++{
++	unsigned long flags;
++	u32 mask;
++
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(PBA_MASK);
++	if (enabled)
++		mask |= 1 << clk->index;
++	else
++		mask &= ~(1 << clk->index);
++	pm_writel(PBA_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long pba_clk_get_rate(struct clk *clk)
++{
++	unsigned long cksel, shift = 0;
++
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(PBADIV))
++		shift = PM_BFEXT(PBASEL, cksel) + 1;
++
++	return bus_clk_get_rate(clk, shift);
++}
++
++static void pbb_clk_mode(struct clk *clk, int enabled)
++{
++	unsigned long flags;
++	u32 mask;
++
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(PBB_MASK);
++	if (enabled)
++		mask |= 1 << clk->index;
++	else
++		mask &= ~(1 << clk->index);
++	pm_writel(PBB_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long pbb_clk_get_rate(struct clk *clk)
++{
++	unsigned long cksel, shift = 0;
++
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(PBBDIV))
++		shift = PM_BFEXT(PBBSEL, cksel) + 1;
++
++	return bus_clk_get_rate(clk, shift);
++}
++
++static struct clk cpu_clk = {
++	.name		= "cpu",
++	.get_rate	= cpu_clk_get_rate,
++	.set_rate	= cpu_clk_set_rate,
++	.users		= 1,
++};
++static struct clk hsb_clk = {
++	.name		= "hsb",
++	.parent		= &cpu_clk,
++	.get_rate	= hsb_clk_get_rate,
++};
++static struct clk pba_clk = {
++	.name		= "pba",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= pba_clk_get_rate,
++	.index		= 1,
++};
++static struct clk pbb_clk = {
++	.name		= "pbb",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.users		= 1,
++	.index		= 2,
++};
++
++/* --------------------------------------------------------------------
++ *  Generic Clock operations
++ * -------------------------------------------------------------------- */
++
++static void genclk_mode(struct clk *clk, int enabled)
++{
++	u32 control;
++
++	control = pm_readl(GCCTRL(clk->index));
++	if (enabled)
++		control |= PM_BIT(CEN);
++	else
++		control &= ~PM_BIT(CEN);
++	pm_writel(GCCTRL(clk->index), control);
++}
++
++static unsigned long genclk_get_rate(struct clk *clk)
++{
++	u32 control;
++	unsigned long div = 1;
++
++	control = pm_readl(GCCTRL(clk->index));
++	if (control & PM_BIT(DIVEN))
++		div = 2 * (PM_BFEXT(DIV, control) + 1);
++
++	return clk->parent->get_rate(clk->parent) / div;
++}
++
++static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
++{
++	u32 control;
++	unsigned long parent_rate, actual_rate, div;
++
++	parent_rate = clk->parent->get_rate(clk->parent);
++	control = pm_readl(GCCTRL(clk->index));
++
++	if (rate > 3 * parent_rate / 4) {
++		actual_rate = parent_rate;
++		control &= ~PM_BIT(DIVEN);
++	} else {
++		div = (parent_rate + rate) / (2 * rate) - 1;
++		control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
++		actual_rate = parent_rate / (2 * (div + 1));
++	}
++
++	dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
++		clk->name, rate, actual_rate);
++
++	if (apply)
++		pm_writel(GCCTRL(clk->index), control);
++
++	return actual_rate;
++}
++
++int genclk_set_parent(struct clk *clk, struct clk *parent)
++{
++	u32 control;
++
++	dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
++		clk->name, parent->name, clk->parent->name);
++
++	control = pm_readl(GCCTRL(clk->index));
++
++	if (parent == &osc1 || parent == &pll1)
++		control |= PM_BIT(OSCSEL);
++	else if (parent == &osc0 || parent == &pll0)
++		control &= ~PM_BIT(OSCSEL);
++	else
++		return -EINVAL;
++
++	if (parent == &pll0 || parent == &pll1)
++		control |= PM_BIT(PLLSEL);
++	else
++		control &= ~PM_BIT(PLLSEL);
++
++	pm_writel(GCCTRL(clk->index), control);
++	clk->parent = parent;
++
++	return 0;
++}
++
++static void __init genclk_init_parent(struct clk *clk)
++{
++	u32 control;
++	struct clk *parent;
++
++	BUG_ON(clk->index > 7);
++
++	control = pm_readl(GCCTRL(clk->index));
++	if (control & PM_BIT(OSCSEL))
++		parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
++	else
++		parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
++
++	clk->parent = parent;
++}
++
++/* --------------------------------------------------------------------
++ *  System peripherals
++ * -------------------------------------------------------------------- */
++static struct resource at32_pm0_resource[] = {
++	{
++		.start	= 0xfff00000,
++		.end	= 0xfff0007f,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(20),
++};
++
++static struct resource at32ap700x_rtc0_resource[] = {
++	{
++		.start	= 0xfff00080,
++		.end	= 0xfff000af,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(21),
++};
++
++static struct resource at32_wdt0_resource[] = {
++	{
++		.start	= 0xfff000b0,
++		.end	= 0xfff000cf,
++		.flags	= IORESOURCE_MEM,
++	},
++};
++
++static struct resource at32_eic0_resource[] = {
++	{
++		.start	= 0xfff00100,
++		.end	= 0xfff0013f,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(19),
++};
++
++DEFINE_DEV(at32_pm, 0);
++DEFINE_DEV(at32ap700x_rtc, 0);
++DEFINE_DEV(at32_wdt, 0);
++DEFINE_DEV(at32_eic, 0);
++
++/*
++ * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
++ * is always running.
++ */
++static struct clk at32_pm_pclk = {
++	.name		= "pclk",
++	.dev		= &at32_pm0_device.dev,
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.users		= 1,
++	.index		= 0,
++};
++
++static struct resource intc0_resource[] = {
++	PBMEM(0xfff00400),
++};
++struct platform_device at32_intc0_device = {
++	.name		= "intc",
++	.id		= 0,
++	.resource	= intc0_resource,
++	.num_resources	= ARRAY_SIZE(intc0_resource),
++};
++DEV_CLK(pclk, at32_intc0, pbb, 1);
++
++static struct clk ebi_clk = {
++	.name		= "ebi",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= hsb_clk_get_rate,
++	.users		= 1,
++};
++static struct clk hramc_clk = {
++	.name		= "hramc",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= hsb_clk_get_rate,
++	.users		= 1,
++	.index		= 3,
++};
++
++static struct resource smc0_resource[] = {
++	PBMEM(0xfff03400),
++};
++DEFINE_DEV(smc, 0);
++DEV_CLK(pclk, smc0, pbb, 13);
++DEV_CLK(mck, smc0, hsb, 0);
++
++static struct platform_device pdc_device = {
++	.name		= "pdc",
++	.id		= 0,
++};
++DEV_CLK(hclk, pdc, hsb, 4);
++DEV_CLK(pclk, pdc, pba, 16);
++
++static struct clk pico_clk = {
++	.name		= "pico",
++	.parent		= &cpu_clk,
++	.mode		= cpu_clk_mode,
++	.get_rate	= cpu_clk_get_rate,
++	.users		= 1,
++};
++
++static struct resource dmaca0_resource[] = {
++	{
++		.start	= 0xff200000,
++		.end	= 0xff20ffff,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(2),
++};
++DEFINE_DEV(dmaca, 0);
++DEV_CLK(hclk, dmaca0, hsb, 10);
++
++/* --------------------------------------------------------------------
++ * HMATRIX
++ * -------------------------------------------------------------------- */
++
++static struct clk hmatrix_clk = {
++	.name		= "hmatrix_clk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 2,
++	.users		= 1,
++};
++#define HMATRIX_BASE	((void __iomem *)0xfff00800)
++
++#define hmatrix_readl(reg)					\
++	__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
++#define hmatrix_writel(reg,value)				\
++	__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
++
++/*
++ * Set bits in the HMATRIX Special Function Register (SFR) used by the
++ * External Bus Interface (EBI). This can be used to enable special
++ * features like CompactFlash support, NAND Flash support, etc. on
++ * certain chipselects.
++ */
++static inline void set_ebi_sfr_bits(u32 mask)
++{
++	u32 sfr;
++
++	clk_enable(&hmatrix_clk);
++	sfr = hmatrix_readl(SFR4);
++	sfr |= mask;
++	hmatrix_writel(SFR4, sfr);
++	clk_disable(&hmatrix_clk);
++}
++
++/* --------------------------------------------------------------------
++ *  System Timer/Counter (TC)
++ * -------------------------------------------------------------------- */
++static struct resource at32_systc0_resource[] = {
++	PBMEM(0xfff00c00),
++	IRQ(22),
++};
++struct platform_device at32_systc0_device = {
++	.name		= "systc",
++	.id		= 0,
++	.resource	= at32_systc0_resource,
++	.num_resources	= ARRAY_SIZE(at32_systc0_resource),
++};
++DEV_CLK(pclk, at32_systc0, pbb, 3);
++
++/* --------------------------------------------------------------------
++ *  PIO
++ * -------------------------------------------------------------------- */
++
++static struct resource pio0_resource[] = {
++	PBMEM(0xffe02800),
++	IRQ(13),
++};
++DEFINE_DEV(pio, 0);
++DEV_CLK(mck, pio0, pba, 10);
++
++static struct resource pio1_resource[] = {
++	PBMEM(0xffe02c00),
++	IRQ(14),
++};
++DEFINE_DEV(pio, 1);
++DEV_CLK(mck, pio1, pba, 11);
++
++static struct resource pio2_resource[] = {
++	PBMEM(0xffe03000),
++	IRQ(15),
++};
++DEFINE_DEV(pio, 2);
++DEV_CLK(mck, pio2, pba, 12);
++
++static struct resource pio3_resource[] = {
++	PBMEM(0xffe03400),
++	IRQ(16),
++};
++DEFINE_DEV(pio, 3);
++DEV_CLK(mck, pio3, pba, 13);
++
++static struct resource pio4_resource[] = {
++	PBMEM(0xffe03800),
++	IRQ(17),
++};
++DEFINE_DEV(pio, 4);
++DEV_CLK(mck, pio4, pba, 14);
++
++void __init at32_add_system_devices(void)
++{
++	platform_device_register(&at32_pm0_device);
++	platform_device_register(&at32_intc0_device);
++	platform_device_register(&at32ap700x_rtc0_device);
++	platform_device_register(&at32_wdt0_device);
++	platform_device_register(&at32_eic0_device);
++	platform_device_register(&smc0_device);
++	platform_device_register(&pdc_device);
++	platform_device_register(&dmaca0_device);
++
++	platform_device_register(&at32_systc0_device);
++
++	platform_device_register(&pio0_device);
++	platform_device_register(&pio1_device);
++	platform_device_register(&pio2_device);
++	platform_device_register(&pio3_device);
++	platform_device_register(&pio4_device);
++}
++
++/* --------------------------------------------------------------------
++ *  USART
++ * -------------------------------------------------------------------- */
++
++static struct atmel_uart_data atmel_usart0_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++static struct resource atmel_usart0_resource[] = {
++	PBMEM(0xffe00c00),
++	IRQ(6),
++};
++DEFINE_DEV_DATA(atmel_usart, 0);
++DEV_CLK(usart, atmel_usart0, pba, 4);
++
++static struct atmel_uart_data atmel_usart1_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++static struct resource atmel_usart1_resource[] = {
++	PBMEM(0xffe01000),
++	IRQ(7),
++};
++DEFINE_DEV_DATA(atmel_usart, 1);
++DEV_CLK(usart, atmel_usart1, pba, 4);
++
++static struct atmel_uart_data atmel_usart2_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++static struct resource atmel_usart2_resource[] = {
++	PBMEM(0xffe01400),
++	IRQ(8),
++};
++DEFINE_DEV_DATA(atmel_usart, 2);
++DEV_CLK(usart, atmel_usart2, pba, 5);
++
++static struct atmel_uart_data atmel_usart3_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++static struct resource atmel_usart3_resource[] = {
++	PBMEM(0xffe01800),
++	IRQ(9),
++};
++DEFINE_DEV_DATA(atmel_usart, 3);
++DEV_CLK(usart, atmel_usart3, pba, 6);
++
++static inline void configure_usart0_pins(void)
++{
++	select_peripheral(PA(8),  PERIPH_B, 0);	/* RXD	*/
++	select_peripheral(PA(9),  PERIPH_B, 0);	/* TXD	*/
++}
++
++static inline void configure_usart1_pins(void)
++{
++	select_peripheral(PA(17), PERIPH_A, 0);	/* RXD	*/
++	select_peripheral(PA(18), PERIPH_A, 0);	/* TXD	*/
++}
++
++static inline void configure_usart2_pins(void)
++{
++	select_peripheral(PB(26), PERIPH_B, 0);	/* RXD	*/
++	select_peripheral(PB(27), PERIPH_B, 0);	/* TXD	*/
++}
++
++static inline void configure_usart3_pins(void)
++{
++	select_peripheral(PB(18), PERIPH_B, 0);	/* RXD	*/
++	select_peripheral(PB(17), PERIPH_B, 0);	/* TXD	*/
++}
++
++static struct platform_device *__initdata at32_usarts[4];
++
++void __init at32_map_usart(unsigned int hw_id, unsigned int line)
++{
++	struct platform_device *pdev;
++
++	switch (hw_id) {
++	case 0:
++		pdev = &atmel_usart0_device;
++		configure_usart0_pins();
++		break;
++	case 1:
++		pdev = &atmel_usart1_device;
++		configure_usart1_pins();
++		break;
++	case 2:
++		pdev = &atmel_usart2_device;
++		configure_usart2_pins();
++		break;
++	case 3:
++		pdev = &atmel_usart3_device;
++		configure_usart3_pins();
++		break;
++	default:
++		return;
++	}
++
++	if (PXSEG(pdev->resource[0].start) == P4SEG) {
++		/* Addresses in the P4 segment are permanently mapped 1:1 */
++		struct atmel_uart_data *data = pdev->dev.platform_data;
++		data->regs = (void __iomem *)pdev->resource[0].start;
++	}
++
++	pdev->id = line;
++	at32_usarts[line] = pdev;
++}
++
++struct platform_device *__init at32_add_device_usart(unsigned int id)
++{
++	platform_device_register(at32_usarts[id]);
++	return at32_usarts[id];
++}
++
++struct platform_device *atmel_default_console_device;
++
++void __init at32_setup_serial_console(unsigned int usart_id)
++{
++	atmel_default_console_device = at32_usarts[usart_id];
++}
++
++/* --------------------------------------------------------------------
++ *  Ethernet
++ * -------------------------------------------------------------------- */
++
++#ifdef CONFIG_CPU_AT32AP7000
++static struct eth_platform_data macb0_data;
++static struct resource macb0_resource[] = {
++	PBMEM(0xfff01800),
++	IRQ(25),
++};
++DEFINE_DEV_DATA(macb, 0);
++DEV_CLK(hclk, macb0, hsb, 8);
++DEV_CLK(pclk, macb0, pbb, 6);
++
++static struct eth_platform_data macb1_data;
++static struct resource macb1_resource[] = {
++	PBMEM(0xfff01c00),
++	IRQ(26),
++};
++DEFINE_DEV_DATA(macb, 1);
++DEV_CLK(hclk, macb1, hsb, 9);
++DEV_CLK(pclk, macb1, pbb, 7);
++
++struct platform_device *__init
++at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
++{
++	struct platform_device *pdev;
++
++	switch (id) {
++	case 0:
++		pdev = &macb0_device;
++
++		select_peripheral(PC(3),  PERIPH_A, 0);	/* TXD0	*/
++		select_peripheral(PC(4),  PERIPH_A, 0);	/* TXD1	*/
++		select_peripheral(PC(7),  PERIPH_A, 0);	/* TXEN	*/
++		select_peripheral(PC(8),  PERIPH_A, 0);	/* TXCK */
++		select_peripheral(PC(9),  PERIPH_A, 0);	/* RXD0	*/
++		select_peripheral(PC(10), PERIPH_A, 0);	/* RXD1	*/
++		select_peripheral(PC(13), PERIPH_A, 0);	/* RXER	*/
++		select_peripheral(PC(15), PERIPH_A, 0);	/* RXDV	*/
++		select_peripheral(PC(16), PERIPH_A, 0);	/* MDC	*/
++		select_peripheral(PC(17), PERIPH_A, 0);	/* MDIO	*/
++
++		if (!data->is_rmii) {
++			select_peripheral(PC(0),  PERIPH_A, 0);	/* COL	*/
++			select_peripheral(PC(1),  PERIPH_A, 0);	/* CRS	*/
++			select_peripheral(PC(2),  PERIPH_A, 0);	/* TXER	*/
++			select_peripheral(PC(5),  PERIPH_A, 0);	/* TXD2	*/
++			select_peripheral(PC(6),  PERIPH_A, 0);	/* TXD3 */
++			select_peripheral(PC(11), PERIPH_A, 0);	/* RXD2	*/
++			select_peripheral(PC(12), PERIPH_A, 0);	/* RXD3	*/
++			select_peripheral(PC(14), PERIPH_A, 0);	/* RXCK	*/
++			select_peripheral(PC(18), PERIPH_A, 0);	/* SPD	*/
++		}
++		break;
++
++	case 1:
++		pdev = &macb1_device;
++
++		select_peripheral(PD(13), PERIPH_B, 0);		/* TXD0	*/
++		select_peripheral(PD(14), PERIPH_B, 0);		/* TXD1	*/
++		select_peripheral(PD(11), PERIPH_B, 0);		/* TXEN	*/
++		select_peripheral(PD(12), PERIPH_B, 0);		/* TXCK */
++		select_peripheral(PD(10), PERIPH_B, 0);		/* RXD0	*/
++		select_peripheral(PD(6),  PERIPH_B, 0);		/* RXD1	*/
++		select_peripheral(PD(5),  PERIPH_B, 0);		/* RXER	*/
++		select_peripheral(PD(4),  PERIPH_B, 0);		/* RXDV	*/
++		select_peripheral(PD(3),  PERIPH_B, 0);		/* MDC	*/
++		select_peripheral(PD(2),  PERIPH_B, 0);		/* MDIO	*/
++
++		if (!data->is_rmii) {
++			select_peripheral(PC(19), PERIPH_B, 0);	/* COL	*/
++			select_peripheral(PC(23), PERIPH_B, 0);	/* CRS	*/
++			select_peripheral(PC(26), PERIPH_B, 0);	/* TXER	*/
++			select_peripheral(PC(27), PERIPH_B, 0);	/* TXD2	*/
++			select_peripheral(PC(28), PERIPH_B, 0);	/* TXD3 */
++			select_peripheral(PC(29), PERIPH_B, 0);	/* RXD2	*/
++			select_peripheral(PC(30), PERIPH_B, 0);	/* RXD3	*/
++			select_peripheral(PC(24), PERIPH_B, 0);	/* RXCK	*/
++			select_peripheral(PD(15), PERIPH_B, 0);	/* SPD	*/
++		}
++		break;
++
++	default:
++		return NULL;
++	}
++
++	memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
++	platform_device_register(pdev);
++
++	return pdev;
++}
++#endif
++
++/* --------------------------------------------------------------------
++ *  SPI
++ * -------------------------------------------------------------------- */
++static struct resource atmel_spi0_resource[] = {
++	PBMEM(0xffe00000),
++	IRQ(3),
++};
++DEFINE_DEV(atmel_spi, 0);
++DEV_CLK(spi_clk, atmel_spi0, pba, 0);
++
++static struct resource atmel_spi1_resource[] = {
++	PBMEM(0xffe00400),
++	IRQ(4),
++};
++DEFINE_DEV(atmel_spi, 1);
++DEV_CLK(spi_clk, atmel_spi1, pba, 1);
++
++static void __init
++at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
++		      unsigned int n, const u8 *pins)
++{
++	unsigned int pin, mode;
++
++	for (; n; n--, b++) {
++		b->bus_num = bus_num;
++		if (b->chip_select >= 4)
++			continue;
++		pin = (unsigned)b->controller_data;
++		if (!pin) {
++			pin = pins[b->chip_select];
++			b->controller_data = (void *)pin;
++		}
++		mode = AT32_GPIOF_OUTPUT;
++		if (!(b->mode & SPI_CS_HIGH))
++			mode |= AT32_GPIOF_HIGH;
++		at32_select_gpio(pin, mode);
++	}
++}
++
++struct platform_device *__init
++at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
++{
++	/*
++	 * Manage the chipselects as GPIOs, normally using the same pins
++	 * the SPI controller expects; but boards can use other pins.
++	 */
++	static u8 __initdata spi0_pins[] =
++		{ GPIO_PIN_PA(3), GPIO_PIN_PA(4),
++		  GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
++	static u8 __initdata spi1_pins[] =
++		{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
++		  GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
++	struct platform_device *pdev;
++
++	switch (id) {
++	case 0:
++		pdev = &atmel_spi0_device;
++		select_peripheral(PA(0),  PERIPH_A, 0);	/* MISO	 */
++		select_peripheral(PA(1),  PERIPH_A, 0);	/* MOSI	 */
++		select_peripheral(PA(2),  PERIPH_A, 0);	/* SCK	 */
++		at32_spi_setup_slaves(0, b, n, spi0_pins);
++		break;
++
++	case 1:
++		pdev = &atmel_spi1_device;
++		select_peripheral(PB(0),  PERIPH_B, 0);	/* MISO  */
++		select_peripheral(PB(1),  PERIPH_B, 0);	/* MOSI  */
++		select_peripheral(PB(5),  PERIPH_B, 0);	/* SCK   */
++		at32_spi_setup_slaves(1, b, n, spi1_pins);
++		break;
++
++	default:
++		return NULL;
++	}
++
++	spi_register_board_info(b, n);
++	platform_device_register(pdev);
++	return pdev;
++}
++
++/* --------------------------------------------------------------------
++ *  TWI
++ * -------------------------------------------------------------------- */
++static struct resource atmel_twi0_resource[] __initdata = {
++	PBMEM(0xffe00800),
++	IRQ(5),
++};
++static struct clk atmel_twi0_pclk = {
++	.name		= "twi_pclk",
++	.parent		= &pba_clk,
++	.mode		= pba_clk_mode,
++	.get_rate	= pba_clk_get_rate,
++	.index		= 2,
++};
++
++struct platform_device *__init at32_add_device_twi(unsigned int id)
++{
++	struct platform_device *pdev;
++
++	if (id != 0)
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_twi", id);
++	if (!pdev)
++		return NULL;
++
++	if (platform_device_add_resources(pdev, atmel_twi0_resource,
++				ARRAY_SIZE(atmel_twi0_resource)))
++		goto err_add_resources;
++
++	select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
++	select_peripheral(PA(7),  PERIPH_A, 0);	/* SDL	*/
++
++	atmel_twi0_pclk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++	return pdev;
++
++err_add_resources:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * MMC
++ * -------------------------------------------------------------------- */
++static struct resource atmel_mci0_resource[] __initdata = {
++	PBMEM(0xfff02400),
++	IRQ(28),
++};
++static struct clk atmel_mci0_pclk = {
++	.name		= "mci_clk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 9,
++};
++
++struct platform_device *__init
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
++{
++	struct platform_device *pdev;
++
++	if (id != 0)
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_mci", id);
++	if (!pdev)
++		goto fail;
++
++	if (platform_device_add_resources(pdev, atmel_mci0_resource,
++				ARRAY_SIZE(atmel_mci0_resource)))
++		goto fail;
++
++	if (data && platform_device_add_data(pdev, data,
++				sizeof(struct mci_platform_data)))
++		goto fail;
++
++	select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
++	select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
++	select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
++	select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
++	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
++	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
++
++	if (data) {
++		if (data->detect_pin != GPIO_PIN_NONE)
++			at32_select_gpio(data->detect_pin, 0);
++		if (data->wp_pin != GPIO_PIN_NONE)
++			at32_select_gpio(data->wp_pin, 0);
++	}
++
++	atmel_mci0_pclk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++	return pdev;
++
++fail:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ *  LCDC
++ * -------------------------------------------------------------------- */
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
++static struct atmel_lcdfb_info atmel_lcdfb0_data;
++static struct resource atmel_lcdfb0_resource[] = {
++	{
++		.start		= 0xff000000,
++		.end		= 0xff000fff,
++		.flags		= IORESOURCE_MEM,
++	},
++	IRQ(1),
++	{
++		/* Placeholder for pre-allocated fb memory */
++		.start		= 0x00000000,
++		.end		= 0x00000000,
++		.flags		= 0,
++	},
++};
++DEFINE_DEV_DATA(atmel_lcdfb, 0);
++DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
++static struct clk atmel_lcdfb0_pixclk = {
++	.name		= "lcdc_clk",
++	.dev		= &atmel_lcdfb0_device.dev,
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 7,
++};
++
++struct platform_device *__init
++at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
++		     unsigned long fbmem_start, unsigned long fbmem_len)
++{
++	struct platform_device *pdev;
++	struct atmel_lcdfb_info *info;
++	struct fb_monspecs *monspecs;
++	struct fb_videomode *modedb;
++	unsigned int modedb_size;
++
++	/*
++	 * Do a deep copy of the fb data, monspecs and modedb. Make
++	 * sure all allocations are done before setting up the
++	 * portmux.
++	 */
++	monspecs = kmemdup(data->default_monspecs,
++			   sizeof(struct fb_monspecs), GFP_KERNEL);
++	if (!monspecs)
++		return NULL;
++
++	modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
++	modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
++	if (!modedb)
++		goto err_dup_modedb;
++	monspecs->modedb = modedb;
++
++	switch (id) {
++	case 0:
++		pdev = &atmel_lcdfb0_device;
++		select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
++		select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
++		select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
++		select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
++		select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
++		select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
++		select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
++		select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
++		select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
++		select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
++		select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
++		select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
++		select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
++		select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
++		select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
++		select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
++		select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
++		select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
++		select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
++		select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
++		select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
++		select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
++		select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
++		select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
++		select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
++		select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
++		select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
++		select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
++		select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
++		select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
++		select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
++
++		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
++		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
++		break;
++
++	default:
++		goto err_invalid_id;
++	}
++
++	if (fbmem_len) {
++		pdev->resource[2].start = fbmem_start;
++		pdev->resource[2].end = fbmem_start + fbmem_len - 1;
++		pdev->resource[2].flags = IORESOURCE_MEM;
++	}
++
++	info = pdev->dev.platform_data;
++	memcpy(info, data, sizeof(struct atmel_lcdfb_info));
++	info->default_monspecs = monspecs;
++
++	platform_device_register(pdev);
++	return pdev;
++
++err_invalid_id:
++	kfree(modedb);
++err_dup_modedb:
++	kfree(monspecs);
++	return NULL;
++}
++#endif
++
++/* --------------------------------------------------------------------
++ *  SSC
++ * -------------------------------------------------------------------- */
++static struct resource ssc0_resource[] = {
++	PBMEM(0xffe01c00),
++	IRQ(10),
++};
++DEFINE_DEV(ssc, 0);
++DEV_CLK(pclk, ssc0, pba, 7);
++
++static struct resource ssc1_resource[] = {
++	PBMEM(0xffe02000),
++	IRQ(11),
++};
++DEFINE_DEV(ssc, 1);
++DEV_CLK(pclk, ssc1, pba, 8);
++
++static struct resource ssc2_resource[] = {
++	PBMEM(0xffe02400),
++	IRQ(12),
++};
++DEFINE_DEV(ssc, 2);
++DEV_CLK(pclk, ssc2, pba, 9);
++
++struct platform_device *__init
++at32_add_device_ssc(unsigned int id, unsigned int flags)
++{
++	struct platform_device *pdev;
++
++	switch (id) {
++	case 0:
++		pdev = &ssc0_device;
++		if (flags & ATMEL_SSC_RF)
++			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
++		if (flags & ATMEL_SSC_RK)
++			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
++		if (flags & ATMEL_SSC_TK)
++			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
++		if (flags & ATMEL_SSC_TF)
++			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
++		if (flags & ATMEL_SSC_TD)
++			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
++		if (flags & ATMEL_SSC_RD)
++			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
++		break;
++	case 1:
++		pdev = &ssc1_device;
++		if (flags & ATMEL_SSC_RF)
++			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
++		if (flags & ATMEL_SSC_RK)
++			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
++		if (flags & ATMEL_SSC_TK)
++			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
++		if (flags & ATMEL_SSC_TF)
++			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
++		if (flags & ATMEL_SSC_TD)
++			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
++		if (flags & ATMEL_SSC_RD)
++			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
++		break;
++	case 2:
++		pdev = &ssc2_device;
++		if (flags & ATMEL_SSC_TD)
++			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
++		if (flags & ATMEL_SSC_RD)
++			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
++		if (flags & ATMEL_SSC_TK)
++			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
++		if (flags & ATMEL_SSC_TF)
++			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
++		if (flags & ATMEL_SSC_RF)
++			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
++		if (flags & ATMEL_SSC_RK)
++			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
++		break;
++	default:
++		return NULL;
++	}
++
++	platform_device_register(pdev);
++	return pdev;
++}
++
++/* --------------------------------------------------------------------
++ *  USB Device Controller
++ * -------------------------------------------------------------------- */
++static struct resource usba0_resource[] __initdata = {
++	{
++		.start		= 0xff300000,
++		.end		= 0xff3fffff,
++		.flags		= IORESOURCE_MEM,
++	}, {
++		.start		= 0xfff03000,
++		.end		= 0xfff033ff,
++		.flags		= IORESOURCE_MEM,
++	},
++	IRQ(31),
++};
++static struct clk usba0_pclk = {
++	.name		= "pclk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 12,
++};
++static struct clk usba0_hclk = {
++	.name		= "hclk",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= hsb_clk_get_rate,
++	.index		= 6,
++};
++
++struct platform_device *__init
++at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
++{
++	struct platform_device *pdev;
++
++	if (id != 0)
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_usba_udc", 0);
++	if (!pdev)
++		return NULL;
++
++	if (platform_device_add_resources(pdev, usba0_resource,
++					  ARRAY_SIZE(usba0_resource)))
++		goto out_free_pdev;
++
++	if (data) {
++		if (platform_device_add_data(pdev, data, sizeof(*data)))
++			goto out_free_pdev;
++
++		if (data->vbus_pin != GPIO_PIN_NONE)
++			at32_select_gpio(data->vbus_pin, 0);
++	}
++
++	usba0_pclk.dev = &pdev->dev;
++	usba0_hclk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++
++	return pdev;
++
++out_free_pdev:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * IDE / CompactFlash
++ * -------------------------------------------------------------------- */
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7001)
++static struct resource at32_smc_cs4_resource[] __initdata = {
++	{
++		.start	= 0x04000000,
++		.end	= 0x07ffffff,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(~0UL), /* Magic IRQ will be overridden */
++};
++static struct resource at32_smc_cs5_resource[] __initdata = {
++	{
++		.start	= 0x20000000,
++		.end	= 0x23ffffff,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(~0UL), /* Magic IRQ will be overridden */
++};
++
++static int __init at32_init_ide_or_cf(struct platform_device *pdev,
++		unsigned int cs, unsigned int extint)
++{
++	static unsigned int extint_pin_map[4] __initdata = {
++		GPIO_PIN_PB(25),
++		GPIO_PIN_PB(26),
++		GPIO_PIN_PB(27),
++		GPIO_PIN_PB(28),
++	};
++	static bool common_pins_initialized __initdata = false;
++	unsigned int extint_pin;
++	int ret;
++
++	if (extint >= ARRAY_SIZE(extint_pin_map))
++		return -EINVAL;
++	extint_pin = extint_pin_map[extint];
++
++	switch (cs) {
++	case 4:
++		ret = platform_device_add_resources(pdev,
++				at32_smc_cs4_resource,
++				ARRAY_SIZE(at32_smc_cs4_resource));
++		if (ret)
++			return ret;
++
++		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
++		set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
++		break;
++	case 5:
++		ret = platform_device_add_resources(pdev,
++				at32_smc_cs5_resource,
++				ARRAY_SIZE(at32_smc_cs5_resource));
++		if (ret)
++			return ret;
++
++		select_peripheral(PE(22), PERIPH_A, 0); /* NCS5   -> OE_N  */
++		set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	if (!common_pins_initialized) {
++		select_peripheral(PE(19), PERIPH_A, 0);	/* CFCE1  -> CS0_N */
++		select_peripheral(PE(20), PERIPH_A, 0);	/* CFCE2  -> CS1_N */
++		select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW  -> DIR   */
++		select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT  <- IORDY */
++		common_pins_initialized = true;
++	}
++
++	at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
++
++	pdev->resource[1].start = EIM_IRQ_BASE + extint;
++	pdev->resource[1].end = pdev->resource[1].start;
++
++	return 0;
++}
++
++struct platform_device *__init
++at32_add_device_ide(unsigned int id, unsigned int extint,
++		    struct ide_platform_data *data)
++{
++	struct platform_device *pdev;
++
++	pdev = platform_device_alloc("at32_ide", id);
++	if (!pdev)
++		goto fail;
++
++	if (platform_device_add_data(pdev, data,
++				sizeof(struct ide_platform_data)))
++		goto fail;
++
++	if (at32_init_ide_or_cf(pdev, data->cs, extint))
++		goto fail;
++
++	platform_device_add(pdev);
++	return pdev;
++
++fail:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++struct platform_device *__init
++at32_add_device_cf(unsigned int id, unsigned int extint,
++		    struct cf_platform_data *data)
++{
++	struct platform_device *pdev;
++
++	pdev = platform_device_alloc("at32_cf", id);
++	if (!pdev)
++		goto fail;
++
++	if (platform_device_add_data(pdev, data,
++				sizeof(struct cf_platform_data)))
++		goto fail;
++
++	if (at32_init_ide_or_cf(pdev, data->cs, extint))
++		goto fail;
++
++	if (data->detect_pin != GPIO_PIN_NONE)
++		at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
++	if (data->reset_pin != GPIO_PIN_NONE)
++		at32_select_gpio(data->reset_pin, 0);
++	if (data->vcc_pin != GPIO_PIN_NONE)
++		at32_select_gpio(data->vcc_pin, 0);
++	/* READY is used as extint, so we can't select it as gpio */
++
++	platform_device_add(pdev);
++	return pdev;
++
++fail:
++	platform_device_put(pdev);
++	return NULL;
++}
++#endif
++
++/* --------------------------------------------------------------------
++ * AC97C
++ * -------------------------------------------------------------------- */
++static struct resource atmel_ac97c0_resource[] __initdata = {
++	PBMEM(0xfff02800),
++	IRQ(29),
++};
++static struct clk atmel_ac97c0_pclk = {
++	.name		= "pclk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 10,
++};
++
++struct platform_device *__init at32_add_device_ac97c(unsigned int id)
++{
++	struct platform_device *pdev;
++
++	if (id != 0)
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_ac97c", id);
++	if (!pdev)
++		return NULL;
++
++	if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
++				ARRAY_SIZE(atmel_ac97c0_resource)))
++		goto err_add_resources;
++
++	select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
++	select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
++	select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
++	select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
++
++	atmel_ac97c0_pclk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++	return pdev;
++
++err_add_resources:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * ABDAC
++ * -------------------------------------------------------------------- */
++static struct resource abdac0_resource[] __initdata = {
++	PBMEM(0xfff02000),
++	IRQ(27),
++};
++static struct clk abdac0_pclk = {
++	.name		= "pclk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 8,
++};
++static struct clk abdac0_sample_clk = {
++	.name		= "sample_clk",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 6,
++};
++
++struct platform_device *__init at32_add_device_abdac(unsigned int id)
++{
++	struct platform_device *pdev;
++
++	if (id != 0)
++		return NULL;
++
++	pdev = platform_device_alloc("abdac", id);
++	if (!pdev)
++		return NULL;
++
++	if (platform_device_add_resources(pdev, abdac0_resource,
++				ARRAY_SIZE(abdac0_resource)))
++		goto err_add_resources;
++
++	select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
++	select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
++	select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
++	select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
++
++	abdac0_pclk.dev = &pdev->dev;
++	abdac0_sample_clk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++	return pdev;
++
++err_add_resources:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ *  GCLK
++ * -------------------------------------------------------------------- */
++static struct clk gclk0 = {
++	.name		= "gclk0",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 0,
++};
++static struct clk gclk1 = {
++	.name		= "gclk1",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 1,
++};
++static struct clk gclk2 = {
++	.name		= "gclk2",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 2,
++};
++static struct clk gclk3 = {
++	.name		= "gclk3",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 3,
++};
++static struct clk gclk4 = {
++	.name		= "gclk4",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 4,
++};
++
++struct clk *at32_clock_list[] = {
++	&osc32k,
++	&osc0,
++	&osc1,
++	&pll0,
++	&pll1,
++	&cpu_clk,
++	&hsb_clk,
++	&pba_clk,
++	&pbb_clk,
++	&at32_pm_pclk,
++	&at32_intc0_pclk,
++	&hmatrix_clk,
++	&ebi_clk,
++	&hramc_clk,
++	&smc0_pclk,
++	&smc0_mck,
++	&pdc_hclk,
++	&pdc_pclk,
++	&dmaca0_hclk,
++	&pico_clk,
++	&pio0_mck,
++	&pio1_mck,
++	&pio2_mck,
++	&pio3_mck,
++	&pio4_mck,
++	&at32_systc0_pclk,
++	&atmel_usart0_usart,
++	&atmel_usart1_usart,
++	&atmel_usart2_usart,
++	&atmel_usart3_usart,
++#if defined(CONFIG_CPU_AT32AP7000)
++	&macb0_hclk,
++	&macb0_pclk,
++	&macb1_hclk,
++	&macb1_pclk,
++#endif
++	&atmel_spi0_spi_clk,
++	&atmel_spi1_spi_clk,
++	&atmel_twi0_pclk,
++	&atmel_mci0_pclk,
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
++	&atmel_lcdfb0_hck1,
++	&atmel_lcdfb0_pixclk,
++#endif
++	&ssc0_pclk,
++	&ssc1_pclk,
++	&ssc2_pclk,
++	&usba0_hclk,
++	&usba0_pclk,
++	&atmel_ac97c0_pclk,
++	&abdac0_pclk,
++	&abdac0_sample_clk,
++	&gclk0,
++	&gclk1,
++	&gclk2,
++	&gclk3,
++	&gclk4,
++};
++unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
++
++void __init at32_portmux_init(void)
++{
++	at32_init_pio(&pio0_device);
++	at32_init_pio(&pio1_device);
++	at32_init_pio(&pio2_device);
++	at32_init_pio(&pio3_device);
++	at32_init_pio(&pio4_device);
++}
++
++void __init at32_clock_init(void)
++{
++	u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
++	int i;
++
++	if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
++		main_clock = &pll0;
++		cpu_clk.parent = &pll0;
++	} else {
++		main_clock = &osc0;
++		cpu_clk.parent = &osc0;
++	}
++
++	if (pm_readl(PLL0) & PM_BIT(PLLOSC))
++		pll0.parent = &osc1;
++	if (pm_readl(PLL1) & PM_BIT(PLLOSC))
++		pll1.parent = &osc1;
++
++	genclk_init_parent(&gclk0);
++	genclk_init_parent(&gclk1);
++	genclk_init_parent(&gclk2);
++	genclk_init_parent(&gclk3);
++	genclk_init_parent(&gclk4);
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
++	genclk_init_parent(&atmel_lcdfb0_pixclk);
++#endif
++	genclk_init_parent(&abdac0_sample_clk);
++
++	/*
++	 * Turn on all clocks that have at least one user already, and
++	 * turn off everything else. We only do this for module
++	 * clocks, and even though it isn't particularly pretty to
++	 * check the address of the mode function, it should do the
++	 * trick...
++	 */
++	for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
++		struct clk *clk = at32_clock_list[i];
++
++		if (clk->users == 0)
++			continue;
++
++		if (clk->mode == &cpu_clk_mode)
++			cpu_mask |= 1 << clk->index;
++		else if (clk->mode == &hsb_clk_mode)
++			hsb_mask |= 1 << clk->index;
++		else if (clk->mode == &pba_clk_mode)
++			pba_mask |= 1 << clk->index;
++		else if (clk->mode == &pbb_clk_mode)
++			pbb_mask |= 1 << clk->index;
++	}
++
++	pm_writel(CPU_MASK, cpu_mask);
++	pm_writel(HSB_MASK, hsb_mask);
++	pm_writel(PBA_MASK, pba_mask);
++	pm_writel(PBB_MASK, pbb_mask);
++}
+diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
+index 0f8c89c..4642117 100644
+--- a/arch/avr32/mach-at32ap/clock.c
++++ b/arch/avr32/mach-at32ap/clock.c
+@@ -150,3 +150,119 @@ struct clk *clk_get_parent(struct clk *clk)
+ 	return clk->parent;
+ }
+ EXPORT_SYMBOL(clk_get_parent);
++
++
++
++#ifdef CONFIG_DEBUG_FS
++
++/* /sys/kernel/debug/at32ap_clk */
++
++#include <linux/io.h>
++#include <linux/debugfs.h>
++#include <linux/seq_file.h>
++#include "pm.h"
++
++
++#define	NEST_DELTA	2
++#define	NEST_MAX	6
++
++struct clkinf {
++	struct seq_file	*s;
++	unsigned	nest;
++};
++
++static void
++dump_clock(struct clk *parent, struct clkinf *r)
++{
++	unsigned	nest = r->nest;
++	char		buf[16 + NEST_MAX];
++	struct clk	*clk;
++	unsigned	i;
++
++	/* skip clocks coupled to devices that aren't registered */
++	if (parent->dev && !parent->dev->bus_id[0] && !parent->users)
++		return;
++
++	/* <nest spaces> name <pad to end> */
++	memset(buf, ' ', sizeof(buf) - 1);
++	buf[sizeof(buf) - 1] = 0;
++	i = strlen(parent->name);
++	memcpy(buf + nest, parent->name,
++			min(i, (unsigned)(sizeof(buf) - 1 - nest)));
++
++	seq_printf(r->s, "%s%c users=%2d %-3s %9ld Hz",
++		buf, parent->set_parent ? '*' : ' ',
++		parent->users,
++		parent->users ? "on" : "off",	/* NOTE: not-paranoid!! */
++		clk_get_rate(parent));
++	if (parent->dev)
++		seq_printf(r->s, ", for %s", parent->dev->bus_id);
++	seq_printf(r->s, "\n");
++
++	/* cost of this scan is small, but not linear... */
++	r->nest = nest + NEST_DELTA;
++	for (i = 3; i < at32_nr_clocks; i++) {
++		clk = at32_clock_list[i];
++		if (clk->parent == parent)
++			dump_clock(clk, r);
++	}
++	r->nest = nest;
++}
++
++static int clk_show(struct seq_file *s, void *unused)
++{
++	struct clkinf	r;
++	int		i;
++
++	/* show all the power manager registers */
++	seq_printf(s, "MCCTRL  = %8x\n", pm_readl(MCCTRL));
++	seq_printf(s, "CKSEL   = %8x\n", pm_readl(CKSEL));
++	seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPU_MASK));
++	seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSB_MASK));
++	seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBA_MASK));
++	seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBB_MASK));
++	seq_printf(s, "PLL0    = %8x\n", pm_readl(PLL0));
++	seq_printf(s, "PLL1    = %8x\n", pm_readl(PLL1));
++	seq_printf(s, "IMR     = %8x\n", pm_readl(IMR));
++	for (i = 0; i < 8; i++) {
++		if (i == 5)
++			continue;
++		seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL(i)));
++	}
++
++	seq_printf(s, "\n");
++
++	/* show clock tree as derived from the three oscillators
++	 * we "know" are at the head of the list
++	 */
++	r.s = s;
++	r.nest = 0;
++	dump_clock(at32_clock_list[0], &r);
++	dump_clock(at32_clock_list[1], &r);
++	dump_clock(at32_clock_list[2], &r);
++
++	return 0;
++}
++
++static int clk_open(struct inode *inode, struct file *file)
++{
++	return single_open(file, clk_show, NULL);
++}
++
++static const struct file_operations clk_operations = {
++	.open		= clk_open,
++	.read		= seq_read,
++	.llseek		= seq_lseek,
++	.release	= single_release,
++};
++
++static int __init clk_debugfs_init(void)
++{
++	(void) debugfs_create_file("at32ap_clk", S_IFREG | S_IRUGO,
++			NULL, NULL, &clk_operations);
++
++	return 0;
++}
++postcore_initcall(clk_debugfs_init);
++
++#endif
+diff --git a/arch/avr32/mach-at32ap/gpio-dev.c b/arch/avr32/mach-at32ap/gpio-dev.c
+new file mode 100644
+index 0000000..8cf6d11
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/gpio-dev.c
+@@ -0,0 +1,573 @@
++/*
++ * GPIO /dev and configfs interface
++ *
++ * Copyright (C) 2006-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/kernel.h>
++#include <linux/configfs.h>
++#include <linux/cdev.h>
++#include <linux/device.h>
++#include <linux/fs.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/poll.h>
++#include <linux/uaccess.h>
++#include <linux/wait.h>
++
++#include <asm/gpio.h>
++#include <asm/arch/portmux.h>
++
++#define GPIO_DEV_MAX			8
++
++static struct class *gpio_dev_class;
++static dev_t gpio_devt;
++
++struct gpio_item {
++	spinlock_t lock;
++
++	int enabled;
++	int initialized;
++	int port;
++	u32 pin_mask;
++	u32 oe_mask;
++
++	/* Pin state last time we read it (for blocking reads) */
++	u32 pin_state;
++	int changed;
++
++	wait_queue_head_t change_wq;
++	struct fasync_struct *async_queue;
++
++	int id;
++	struct class_device *gpio_dev;
++	struct cdev char_dev;
++	struct config_item item;
++};
++
++struct gpio_attribute {
++	struct configfs_attribute attr;
++	ssize_t (*show)(struct gpio_item *, char *);
++	ssize_t (*store)(struct gpio_item *, const char *, size_t);
++};
++
++static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
++{
++	struct gpio_item *gpio = dev_id;
++	u32 old_state, new_state;
++
++	old_state = gpio->pin_state;
++	new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
++	gpio->pin_state = new_state;
++
++	if (new_state != old_state) {
++		gpio->changed = 1;
++		wake_up_interruptible(&gpio->change_wq);
++
++		if (gpio->async_queue)
++			kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
++	}
++
++	return IRQ_HANDLED;
++}
++
++static int gpio_dev_open(struct inode *inode, struct file *file)
++{
++	struct gpio_item *gpio = container_of(inode->i_cdev,
++					      struct gpio_item,
++					      char_dev);
++	unsigned int irq;
++	unsigned int i;
++	int ret;
++
++	nonseekable_open(inode, file);
++	config_item_get(&gpio->item);
++	file->private_data = gpio;
++
++	gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
++						       gpio->pin_mask);
++	gpio->changed = 1;
++
++	for (i = 0; i < 32; i++) {
++		if (gpio->pin_mask & (1 << i)) {
++			irq = gpio_to_irq(32 * gpio->port + i);
++			ret = request_irq(irq, gpio_dev_interrupt, 0,
++					  "gpio-dev", gpio);
++			if (ret)
++				goto err_irq;
++		}
++	}
++
++	return 0;
++
++err_irq:
++	while (i--) {
++		if (gpio->pin_mask & (1 << i)) {
++			irq = gpio_to_irq(32 * gpio->port + i);
++			free_irq(irq, gpio);
++		}
++	}
++
++	config_item_put(&gpio->item);
++
++	return ret;
++}
++
++static int gpio_dev_fasync(int fd, struct file *file, int mode)
++{
++	struct gpio_item *gpio = file->private_data;
++
++	return fasync_helper(fd, file, mode, &gpio->async_queue);
++}
++
++static int gpio_dev_release(struct inode *inode, struct file *file)
++{
++	struct gpio_item *gpio = file->private_data;
++	unsigned int irq;
++	unsigned int i;
++
++	gpio_dev_fasync(-1, file, 0);
++
++	for (i = 0; i < 32; i++) {
++		if (gpio->pin_mask & (1 << i)) {
++			irq = gpio_to_irq(32 * gpio->port + i);
++			free_irq(irq, gpio);
++		}
++	}
++
++	config_item_put(&gpio->item);
++
++	return 0;
++}
++
++static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
++{
++	struct gpio_item *gpio = file->private_data;
++	unsigned int mask = 0;
++
++	poll_wait(file, &gpio->change_wq, wait);
++	if (gpio->changed)
++		mask |= POLLIN | POLLRDNORM;
++
++	return mask;
++}
++
++static ssize_t gpio_dev_read(struct file *file, char __user *buf,
++			     size_t count, loff_t *offset)
++{
++	struct gpio_item *gpio = file->private_data;
++	u32 value;
++
++	spin_lock_irq(&gpio->lock);
++	while (!gpio->changed) {
++		spin_unlock_irq(&gpio->lock);
++
++		if (file->f_flags & O_NONBLOCK)
++			return -EAGAIN;
++
++		if (wait_event_interruptible(gpio->change_wq, gpio->changed))
++			return -ERESTARTSYS;
++
++		spin_lock_irq(&gpio->lock);
++	}
++
++	gpio->changed = 0;
++	value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
++
++	spin_unlock_irq(&gpio->lock);
++
++	count = min(count, (size_t)4);
++	if (copy_to_user(buf, &value, count))
++		return -EFAULT;
++
++	return count;
++}
++
++static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
++			      size_t count, loff_t *offset)
++{
++	struct gpio_item *gpio = file->private_data;
++	u32 value = 0;
++	u32 mask = ~0UL;
++
++	count = min(count, (size_t)4);
++	if (copy_from_user(&value, buf, count))
++		return -EFAULT;
++
++	/* Assuming big endian */
++	mask <<= (4 - count) * 8;
++	mask &= gpio->pin_mask;
++
++	at32_gpio_set_value_multiple(gpio->port, value, mask);
++
++	return count;
++}
++
++static struct file_operations gpio_dev_fops = {
++	.owner		= THIS_MODULE,
++	.llseek		= no_llseek,
++	.open		= gpio_dev_open,
++	.release	= gpio_dev_release,
++	.fasync		= gpio_dev_fasync,
++	.poll		= gpio_dev_poll,
++	.read		= gpio_dev_read,
++	.write		= gpio_dev_write,
++};
++
++static struct gpio_item *to_gpio_item(struct config_item *item)
++{
++	return item ? container_of(item, struct gpio_item, item) : NULL;
++}
++
++static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
++{
++	return sprintf(page, "%d\n", gpio->port);
++}
++
++static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
++				  const char *page, size_t count)
++{
++	unsigned long id;
++	char *p = (char *)page;
++	ssize_t ret = -EINVAL;
++
++	id = simple_strtoul(p, &p, 0);
++	if (!p || (*p && (*p != '\n')))
++		return -EINVAL;
++
++	/* Switching PIO is not allowed when live... */
++	spin_lock(&gpio->lock);
++	if (!gpio->enabled) {
++		ret = -ENXIO;
++		if (at32_gpio_port_is_valid(id)) {
++			gpio->port = id;
++			ret = count;
++		}
++	}
++	spin_unlock(&gpio->lock);
++
++	return ret;
++}
++
++static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
++{
++	return sprintf(page, "0x%08x\n", gpio->pin_mask);
++}
++
++static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
++				   const char *page, size_t count)
++{
++	u32 new_mask;
++	char *p = (char *)page;
++	ssize_t ret = -EINVAL;
++
++	new_mask = simple_strtoul(p, &p, 0);
++	if (!p || (*p && (*p != '\n')))
++		return -EINVAL;
++
++	/* Can't update the pin mask while live. */
++	spin_lock(&gpio->lock);
++	if (!gpio->enabled) {
++		gpio->oe_mask &= new_mask;
++		gpio->pin_mask = new_mask;
++		ret = count;
++	}
++	spin_unlock(&gpio->lock);
++
++	return ret;
++}
++
++static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
++{
++	return sprintf(page, "0x%08x\n", gpio->oe_mask);
++}
++
++static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
++				  const char *page, size_t count)
++{
++	u32 mask;
++	char *p = (char *)page;
++	ssize_t ret = -EINVAL;
++
++	mask = simple_strtoul(p, &p, 0);
++	if (!p || (*p && (*p != '\n')))
++		return -EINVAL;
++
++	spin_lock(&gpio->lock);
++	if (!gpio->enabled) {
++		gpio->oe_mask = mask & gpio->pin_mask;
++		ret = count;
++	}
++	spin_unlock(&gpio->lock);
++
++	return ret;
++}
++
++static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
++{
++	return sprintf(page, "%d\n", gpio->enabled);
++}
++
++static ssize_t gpio_store_enabled(struct gpio_item *gpio,
++				  const char *page, size_t count)
++{
++	char *p = (char *)page;
++	int enabled;
++	int ret;
++
++	enabled = simple_strtoul(p, &p, 0);
++	if (!p || (*p && (*p != '\n')))
++		return -EINVAL;
++
++	/* make it a boolean value */
++	enabled = !!enabled;
++
++	if (gpio->enabled == enabled)
++		/* No change; do nothing. */
++		return count;
++
++	BUG_ON(gpio->id >= GPIO_DEV_MAX);
++
++	if (!enabled) {
++		class_device_unregister(gpio->gpio_dev);
++		cdev_del(&gpio->char_dev);
++		at32_deselect_pins(gpio->port, gpio->pin_mask);
++		gpio->initialized = 0;
++	} else {
++		if (gpio->port < 0 || !gpio->pin_mask)
++			return -ENODEV;
++	}
++
++	/* Disallow any updates to gpio_id or pin_mask */
++	spin_lock(&gpio->lock);
++	gpio->enabled = enabled;
++	spin_unlock(&gpio->lock);
++
++	if (!enabled)
++		return count;
++
++	/* Now, try to allocate the pins */
++	ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
++	if (ret)
++		goto err_alloc_pins;
++
++	gpio->initialized = 1;
++
++	cdev_init(&gpio->char_dev, &gpio_dev_fops);
++	gpio->char_dev.owner = THIS_MODULE;
++	ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
++	if (ret < 0)
++		goto err_cdev_add;
++	gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
++					     MKDEV(MAJOR(gpio_devt), gpio->id),
++					     NULL,
++					     "gpio%d", gpio->id);
++	if (IS_ERR(gpio->gpio_dev)) {
++		printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
++		ret = PTR_ERR(gpio->gpio_dev);
++		goto err_class_dev;
++	}
++
++	printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
++	       gpio->id, gpio->port, gpio->pin_mask,
++	       MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
++
++	return 0;
++
++err_class_dev:
++	cdev_del(&gpio->char_dev);
++err_cdev_add:
++	at32_deselect_pins(gpio->port, gpio->pin_mask);
++	gpio->initialized = 0;
++err_alloc_pins:
++	spin_lock(&gpio->lock);
++	gpio->enabled = 0;
++	spin_unlock(&gpio->lock);
++
++	return ret;
++}
++
++static struct gpio_attribute gpio_item_attr_gpio_id = {
++	.attr = {
++		.ca_owner = THIS_MODULE,
++		.ca_name = "gpio_id",
++		.ca_mode = S_IRUGO | S_IWUSR,
++	},
++	.show = gpio_show_gpio_id,
++	.store = gpio_store_gpio_id,
++};
++static struct gpio_attribute gpio_item_attr_pin_mask = {
++	.attr = {
++		.ca_owner = THIS_MODULE,
++		.ca_name = "pin_mask",
++		.ca_mode = S_IRUGO | S_IWUSR,
++	},
++	.show = gpio_show_pin_mask,
++	.store = gpio_store_pin_mask,
++};
++static struct gpio_attribute gpio_item_attr_oe_mask = {
++	.attr = {
++		.ca_owner = THIS_MODULE,
++		.ca_name = "oe_mask",
++		.ca_mode = S_IRUGO | S_IWUSR,
++	},
++	.show = gpio_show_oe_mask,
++	.store = gpio_store_oe_mask,
++};
++static struct gpio_attribute gpio_item_attr_enabled = {
++	.attr = {
++		.ca_owner = THIS_MODULE,
++		.ca_name = "enabled",
++		.ca_mode = S_IRUGO | S_IWUSR,
++	},
++	.show = gpio_show_enabled,
++	.store = gpio_store_enabled,
++};
++
++static struct configfs_attribute *gpio_item_attrs[] = {
++	&gpio_item_attr_gpio_id.attr,
++	&gpio_item_attr_pin_mask.attr,
++	&gpio_item_attr_oe_mask.attr,
++	&gpio_item_attr_enabled.attr,
++	NULL,
++};
++
++static ssize_t gpio_show_attr(struct config_item *item,
++			      struct configfs_attribute *attr,
++			      char *page)
++{
++	struct gpio_item *gpio_item = to_gpio_item(item);
++	struct gpio_attribute *gpio_attr
++		= container_of(attr, struct gpio_attribute, attr);
++	ssize_t ret = 0;
++
++	if (gpio_attr->show)
++		ret = gpio_attr->show(gpio_item, page);
++	return ret;
++}
++
++static ssize_t gpio_store_attr(struct config_item *item,
++			       struct configfs_attribute *attr,
++			       const char *page, size_t count)
++{
++	struct gpio_item *gpio_item = to_gpio_item(item);
++	struct gpio_attribute *gpio_attr
++		= container_of(attr, struct gpio_attribute, attr);
++	ssize_t ret = -EINVAL;
++
++	if (gpio_attr->store)
++		ret = gpio_attr->store(gpio_item, page, count);
++	return ret;
++}
++
++static void gpio_release(struct config_item *item)
++{
++	kfree(to_gpio_item(item));
++}
++
++static struct configfs_item_operations gpio_item_ops = {
++	.release		= gpio_release,
++	.show_attribute		= gpio_show_attr,
++	.store_attribute	= gpio_store_attr,
++};
++
++static struct config_item_type gpio_item_type = {
++	.ct_item_ops	= &gpio_item_ops,
++	.ct_attrs	= gpio_item_attrs,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct config_item *gpio_make_item(struct config_group *group,
++					  const char *name)
++{
++	static int next_id;
++	struct gpio_item *gpio;
++
++	if (next_id >= GPIO_DEV_MAX)
++		return NULL;
++
++	gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
++	if (!gpio)
++		return NULL;
++
++	gpio->id = next_id++;
++	config_item_init_type_name(&gpio->item, name, &gpio_item_type);
++	spin_lock_init(&gpio->lock);
++	init_waitqueue_head(&gpio->change_wq);
++
++	return &gpio->item;
++}
++
++static void gpio_drop_item(struct config_group *group,
++			   struct config_item *item)
++{
++	struct gpio_item *gpio = to_gpio_item(item);
++
++	spin_lock(&gpio->lock);
++	if (gpio->enabled) {
++		class_device_unregister(gpio->gpio_dev);
++		cdev_del(&gpio->char_dev);
++	}
++
++	if (gpio->initialized) {
++		at32_deselect_pins(gpio->port, gpio->pin_mask);
++		gpio->initialized = 0;
++		gpio->enabled = 0;
++	}
++	spin_unlock(&gpio->lock);
++}
++
++static struct configfs_group_operations gpio_group_ops = {
++	.make_item	= gpio_make_item,
++	.drop_item	= gpio_drop_item,
++};
++
++static struct config_item_type gpio_group_type = {
++	.ct_group_ops	= &gpio_group_ops,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct configfs_subsystem gpio_subsys = {
++	.su_group = {
++		.cg_item = {
++			 .ci_namebuf = "gpio",
++			 .ci_type = &gpio_group_type,
++		 },
++	},
++};
++
++static int __init gpio_dev_init(void)
++{
++	int err;
++
++	gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
++	if (IS_ERR(gpio_dev_class)) {
++		err = PTR_ERR(gpio_dev_class);
++		goto err_class_create;
++	}
++
++	err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
++	if (err < 0)
++		goto err_alloc_chrdev;
++
++	/* Configfs initialization */
++	config_group_init(&gpio_subsys.su_group);
++	mutex_init(&gpio_subsys.su_mutex);
++	err = configfs_register_subsystem(&gpio_subsys);
++	if (err)
++		goto err_register_subsys;
++
++	return 0;
++
++err_register_subsys:
++	unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
++err_alloc_chrdev:
++	class_destroy(gpio_dev_class);
++err_class_create:
++	printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
++	return err;
++}
++late_initcall(gpio_dev_init);
+diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
+index 5e22a75..704607f 100644
+--- a/arch/avr32/mach-at32ap/hsmc.c
++++ b/arch/avr32/mach-at32ap/hsmc.c
+@@ -29,16 +29,25 @@ struct hsmc {
+ 
+ static struct hsmc *hsmc;
+ 
+-int smc_set_configuration(int cs, const struct smc_config *config)
++void smc_set_timing(struct smc_config *config,
++		    const struct smc_timing *timing)
+ {
++	int recover;
++	int cycle;
++
+ 	unsigned long mul;
+-	unsigned long offset;
+-	u32 setup, pulse, cycle, mode;
+ 
+-	if (!hsmc)
+-		return -ENODEV;
+-	if (cs >= NR_CHIP_SELECTS)
+-		return -EINVAL;
++	/* Reset all SMC timings */
++	config->ncs_read_setup	= 0;
++	config->nrd_setup	= 0;
++	config->ncs_write_setup	= 0;
++	config->nwe_setup	= 0;
++	config->ncs_read_pulse	= 0;
++	config->nrd_pulse	= 0;
++	config->ncs_write_pulse	= 0;
++	config->nwe_pulse	= 0;
++	config->read_cycle	= 0;
++	config->write_cycle	= 0;
+ 
+ 	/*
+ 	 * cycles = x / T = x * f
+@@ -50,16 +59,102 @@ int smc_set_configuration(int cs, const struct smc_config *config)
+ 
+ #define ns2cyc(x) ((((x) * mul) + 65535) >> 16)
+ 
+-	setup = (HSMC_BF(NWE_SETUP, ns2cyc(config->nwe_setup))
+-		 | HSMC_BF(NCS_WR_SETUP, ns2cyc(config->ncs_write_setup))
+-		 | HSMC_BF(NRD_SETUP, ns2cyc(config->nrd_setup))
+-		 | HSMC_BF(NCS_RD_SETUP, ns2cyc(config->ncs_read_setup)));
+-	pulse = (HSMC_BF(NWE_PULSE, ns2cyc(config->nwe_pulse))
+-		 | HSMC_BF(NCS_WR_PULSE, ns2cyc(config->ncs_write_pulse))
+-		 | HSMC_BF(NRD_PULSE, ns2cyc(config->nrd_pulse))
+-		 | HSMC_BF(NCS_RD_PULSE, ns2cyc(config->ncs_read_pulse)));
+-	cycle = (HSMC_BF(NWE_CYCLE, ns2cyc(config->write_cycle))
+-		 | HSMC_BF(NRD_CYCLE, ns2cyc(config->read_cycle)));
++	if (timing->ncs_read_setup > 0)
++		config->ncs_read_setup = ns2cyc(timing->ncs_read_setup);
++
++	if (timing->nrd_setup > 0)
++		config->nrd_setup = ns2cyc(timing->nrd_setup);
++
++	if (timing->ncs_write_setup > 0)
++		config->ncs_write_setup = ns2cyc(timing->ncs_write_setup);
++
++	if (timing->nwe_setup > 0)
++		config->nwe_setup = ns2cyc(timing->nwe_setup);
++
++	if (timing->ncs_read_pulse > 0)
++		config->ncs_read_pulse = ns2cyc(timing->ncs_read_pulse);
++
++	if (timing->nrd_pulse > 0)
++		config->nrd_pulse = ns2cyc(timing->nrd_pulse);
++
++	if (timing->ncs_write_pulse > 0)
++		config->ncs_write_pulse = ns2cyc(timing->ncs_write_pulse);
++
++	if (timing->nwe_pulse > 0)
++		config->nwe_pulse = ns2cyc(timing->nwe_pulse);
++
++	if (timing->read_cycle > 0)
++		config->read_cycle = ns2cyc(timing->read_cycle);
++
++	if (timing->write_cycle > 0)
++		config->write_cycle = ns2cyc(timing->write_cycle);
++
++	/* Extend read cycle in needed */
++	if (timing->ncs_read_recover > 0)
++		recover = ns2cyc(timing->ncs_read_recover);
++	else
++		recover = 1;
++
++	cycle = config->ncs_read_setup + config->ncs_read_pulse + recover;
++
++	if (config->read_cycle < cycle)
++		config->read_cycle = cycle;
++
++	/* Extend read cycle in needed */
++	if (timing->nrd_recover > 0)
++		recover = ns2cyc(timing->nrd_recover);
++	else
++		recover = 1;
++
++	cycle = config->nrd_setup + config->nrd_pulse + recover;
++
++	if (config->read_cycle < cycle)
++		config->read_cycle = cycle;
++
++	/* Extend write cycle in needed */
++	if (timing->ncs_write_recover > 0)
++		recover = ns2cyc(timing->ncs_write_recover);
++	else
++		recover = 1;
++
++	cycle = config->ncs_write_setup + config->ncs_write_pulse + recover;
++
++	if (config->write_cycle < cycle)
++		config->write_cycle = cycle;
++
++	/* Extend write cycle in needed */
++	if (timing->nwe_recover > 0)
++		recover = ns2cyc(timing->nwe_recover);
++	else
++		recover = 1;
++
++	cycle = config->nwe_setup + config->nwe_pulse + recover;
++
++	if (config->write_cycle < cycle)
++		config->write_cycle = cycle;
++}
++EXPORT_SYMBOL(smc_set_timing);
++
++int smc_set_configuration(int cs, const struct smc_config *config)
++{
++	unsigned long offset;
++	u32 setup, pulse, cycle, mode;
++
++	if (!hsmc)
++		return -ENODEV;
++	if (cs >= NR_CHIP_SELECTS)
++		return -EINVAL;
++
++	setup = (HSMC_BF(NWE_SETUP, config->nwe_setup)
++		 | HSMC_BF(NCS_WR_SETUP, config->ncs_write_setup)
++		 | HSMC_BF(NRD_SETUP, config->nrd_setup)
++		 | HSMC_BF(NCS_RD_SETUP, config->ncs_read_setup));
++	pulse = (HSMC_BF(NWE_PULSE, config->nwe_pulse)
++		 | HSMC_BF(NCS_WR_PULSE, config->ncs_write_pulse)
++		 | HSMC_BF(NRD_PULSE, config->nrd_pulse)
++		 | HSMC_BF(NCS_RD_PULSE, config->ncs_read_pulse));
++	cycle = (HSMC_BF(NWE_CYCLE, config->write_cycle)
++		 | HSMC_BF(NRD_CYCLE, config->read_cycle));
+ 
+ 	switch (config->bus_width) {
+ 	case 1:
+diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
+index 1eb99b8..c978c36 100644
+--- a/arch/avr32/mach-at32ap/pio.c
++++ b/arch/avr32/mach-at32ap/pio.c
+@@ -110,6 +110,10 @@ void __init at32_select_gpio(unsigned int pin, unsigned long flags)
+ 			pio_writel(pio, SODR, mask);
+ 		else
+ 			pio_writel(pio, CODR, mask);
++		if (flags & AT32_GPIOF_MULTIDRV)
++			pio_writel(pio, MDER, mask);
++		else
++			pio_writel(pio, MDDR, mask);
+ 		pio_writel(pio, PUDR, mask);
+ 		pio_writel(pio, OER, mask);
+ 	} else {
+@@ -158,6 +162,82 @@ fail:
+ 	dump_stack();
+ }
+ 
++#ifdef CONFIG_GPIO_DEV
++
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port)
++{
++	return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
++}
++
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
++{
++	struct pio_device *pio;
++	u32 old, new;
++
++	pio = &pio_dev[port];
++	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
++
++	/* Try to allocate the pins */
++	do {
++		old = pio->pinmux_mask;
++		if (old & pins)
++			return -EBUSY;
++
++		new = old | pins;
++	} while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++
++	/* That went well, now configure the port */
++	pio_writel(pio, OER, oe_mask);
++	pio_writel(pio, PER, pins);
++
++	return 0;
++}
++
++void at32_deselect_pins(unsigned int port, u32 pins)
++{
++	struct pio_device *pio;
++	u32 old, new;
++
++	pio = &pio_dev[port];
++	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++	/* Return to a "safe" mux configuration */
++	pio_writel(pio, PUER, pins);
++	pio_writel(pio, ODR, pins);
++
++	/* Deallocate the pins */
++	do {
++		old = pio->pinmux_mask;
++		new = old & ~pins;
++	} while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++}
++
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
++{
++	struct pio_device *pio;
++
++	pio = &pio_dev[port];
++	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++	return pio_readl(pio, PDSR) & pins;
++}
++
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
++{
++	struct pio_device *pio;
++
++	pio = &pio_dev[port];
++	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++	/* No atomic updates for now... */
++	pio_writel(pio, CODR, ~value & mask);
++	pio_writel(pio, SODR, value & mask);
++}
++
++#endif /* CONFIG_GPIO_DEV */
++
++
+ /*--------------------------------------------------------------------------*/
+ 
+ /* GPIO API */
+diff --git a/arch/avr32/mach-at32ap/pm.h b/arch/avr32/mach-at32ap/pm.h
+index a1f8ace..47efd0d 100644
+--- a/arch/avr32/mach-at32ap/pm.h
++++ b/arch/avr32/mach-at32ap/pm.h
+@@ -4,6 +4,14 @@
+ #ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
+ #define __ARCH_AVR32_MACH_AT32AP_PM_H__
+ 
++/*
++ * We can reduce the code size a bit by using a constant here. Since
++ * this file is only used on AVR32 AP CPUs with segmentation enabled,
++ * it's safe to not use ioremap. Generic drivers should of course
++ * never do this.
++ */
++#define AT32_PM_BASE	0xfff00000
++
+ /* PM register offsets */
+ #define PM_MCCTRL				0x0000
+ #define PM_CKSEL				0x0004
+diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c
+index 099212d..26f29c6 100644
+--- a/arch/avr32/mm/dma-coherent.c
++++ b/arch/avr32/mm/dma-coherent.c
+@@ -41,6 +41,13 @@ static struct page *__dma_alloc(struct device *dev, size_t size,
+ 	struct page *page, *free, *end;
+ 	int order;
+ 
++	/* Following is a work-around (a.k.a. hack) to prevent pages
++	 * with __GFP_COMP being passed to split_page() which cannot
++	 * handle them.  The real problem is that this flag probably
++	 * should be 0 on AVR32 as it is not supported on this
++	 * platform--see CONFIG_HUGETLB_PAGE. */
++	gfp &= ~(__GFP_COMP);
++
+ 	size = PAGE_ALIGN(size);
+ 	order = get_order(size);
+ 
+diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
+index 82cf708..480760b 100644
+--- a/arch/avr32/mm/init.c
++++ b/arch/avr32/mm/init.c
+@@ -224,19 +224,9 @@ void free_initmem(void)
+ 
+ #ifdef CONFIG_BLK_DEV_INITRD
+ 
+-static int keep_initrd;
+-
+ void free_initrd_mem(unsigned long start, unsigned long end)
+ {
+-	if (!keep_initrd)
+-		free_area(start, end, "initrd");
+-}
+-
+-static int __init keepinitrd_setup(char *__unused)
+-{
+-	keep_initrd = 1;
+-	return 1;
++	free_area(start, end, "initrd");
+ }
+ 
+-__setup("keepinitrd", keepinitrd_setup);
+ #endif
+diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
+index 37bddc1..8c30dec 100644
+--- a/drivers/char/watchdog/Kconfig
++++ b/drivers/char/watchdog/Kconfig
+@@ -223,7 +223,7 @@ config DAVINCI_WATCHDOG
+ 
+ config AT32AP700X_WDT
+ 	tristate "AT32AP700x watchdog"
+-	depends on CPU_AT32AP7000
++	depends on CPU_AT32AP700X
+ 	help
+ 	  Watchdog timer embedded into AT32AP700x devices. This will reboot
+ 	  your system when the timeout is reached.
+diff --git a/drivers/char/watchdog/at32ap700x_wdt.c b/drivers/char/watchdog/at32ap700x_wdt.c
+index 54a5161..fb5ed64 100644
+--- a/drivers/char/watchdog/at32ap700x_wdt.c
++++ b/drivers/char/watchdog/at32ap700x_wdt.c
+@@ -6,6 +6,19 @@
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License version 2 as
+  * published by the Free Software Foundation.
++ *
++ *
++ * Errata: WDT Clear is blocked after WDT Reset
++ *
++ * A watchdog timer event will, after reset, block writes to the WDT_CLEAR
++ * register, preventing the program to clear the next Watchdog Timer Reset.
++ *
++ * If you still want to use the WDT after a WDT reset a small code can be
++ * insterted at the startup checking the AVR32_PM.rcause register for WDT reset
++ * and use a GPIO pin to reset the system. This method requires that one of the
++ * GPIO pins are available and connected externally to the RESET_N pin. After
++ * the GPIO pin has pulled down the reset line the GPIO will be reset and leave
++ * the pin tristated with pullup.
+  */
+ 
+ #include <linux/init.h>
+@@ -44,6 +57,13 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ 
+ #define WDT_CLR			0x04
+ 
++#define WDT_RCAUSE		0x10
++#define WDT_RCAUSE_POR		   0
++#define WDT_RCAUSE_EXT		   2
++#define WDT_RCAUSE_WDT		   3
++#define WDT_RCAUSE_JTAG		   4
++#define WDT_RCAUSE_SERP		   5
++
+ #define WDT_BIT(name)		(1 << WDT_##name)
+ #define WDT_BF(name, value)	((value) << WDT_##name)
+ 
+@@ -56,6 +76,7 @@ struct wdt_at32ap700x {
+ 	void __iomem		*regs;
+ 	spinlock_t		io_lock;
+ 	int			timeout;
++	int			boot_status;
+ 	unsigned long		users;
+ 	struct miscdevice	miscdev;
+ };
+@@ -126,7 +147,7 @@ static int at32_wdt_close(struct inode *inode, struct file *file)
+ 		at32_wdt_stop();
+ 	} else {
+ 		dev_dbg(wdt->miscdev.parent,
+-			"Unexpected close, not stopping watchdog!\n");
++			"unexpected close, not stopping watchdog!\n");
+ 		at32_wdt_pat();
+ 	}
+ 	clear_bit(1, &wdt->users);
+@@ -154,6 +175,33 @@ static int at32_wdt_settimeout(int time)
+ 	return 0;
+ }
+ 
++/*
++ * Get the watchdog status.
++ */
++static int at32_wdt_get_status(void)
++{
++	int rcause;
++	int status = 0;
++
++	rcause = wdt_readl(wdt, RCAUSE);
++
++	switch (rcause) {
++	case WDT_BIT(RCAUSE_EXT):
++		status = WDIOF_EXTERN1;
++		break;
++	case WDT_BIT(RCAUSE_WDT):
++		status = WDIOF_CARDRESET;
++		break;
++	case WDT_BIT(RCAUSE_POR):  /* fall through */
++	case WDT_BIT(RCAUSE_JTAG): /* fall through */
++	case WDT_BIT(RCAUSE_SERP): /* fall through */
++	default:
++		break;
++	}
++
++	return status;
++}
++
+ static struct watchdog_info at32_wdt_info = {
+ 	.identity	= "at32ap700x watchdog",
+ 	.options	= WDIOF_SETTIMEOUT |
+@@ -194,10 +242,12 @@ static int at32_wdt_ioctl(struct inode *inode, struct file *file,
+ 	case WDIOC_GETTIMEOUT:
+ 		ret = put_user(wdt->timeout, p);
+ 		break;
+-	case WDIOC_GETSTATUS: /* fall through */
+-	case WDIOC_GETBOOTSTATUS:
++	case WDIOC_GETSTATUS:
+ 		ret = put_user(0, p);
+ 		break;
++	case WDIOC_GETBOOTSTATUS:
++		ret = put_user(wdt->boot_status, p);
++		break;
+ 	case WDIOC_SETOPTIONS:
+ 		ret = get_user(time, p);
+ 		if (ret)
+@@ -282,8 +332,19 @@ static int __init at32_wdt_probe(struct platform_device *pdev)
+ 		dev_dbg(&pdev->dev, "could not map I/O memory\n");
+ 		goto err_free;
+ 	}
++
+ 	spin_lock_init(&wdt->io_lock);
+-	wdt->users = 0;
++	wdt->boot_status = at32_wdt_get_status();
++
++	/* Work-around for watchdog silicon errata. */
++	if (wdt->boot_status & WDIOF_CARDRESET) {
++		dev_info(&pdev->dev, "CPU must be reset with external "
++				"reset or POR due to silicon errata.\n");
++		ret = -EIO;
++		goto err_iounmap;
++	} else {
++		wdt->users = 0;
++	}
+ 	wdt->miscdev.minor = WATCHDOG_MINOR;
+ 	wdt->miscdev.name = "watchdog";
+ 	wdt->miscdev.fops = &at32_wdt_fops;
+diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
+index 9f3a4cd..6f5bcd6 100644
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -80,6 +80,14 @@ config I2C_AT91
+ 	  This supports the use of the I2C interface on Atmel AT91
+ 	  processors.
+ 
++config I2C_ATMELTWI
++	tristate "Atmel Two-Wire Interface (TWI)"
++	depends on I2C && (ARCH_AT91 || PLATFORM_AT32AP)
++	help
++	  Atmel on-chip TWI controller. Say Y if you have an AT32 or
++	  AT91-based device and want to use its built-in TWI
++	  functionality.
++
+ config I2C_AU1550
+ 	tristate "Au1550/Au1200 SMBus interface"
+ 	depends on SOC_AU1550 || SOC_AU1200
+diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
+index 5b752e4..e4644a8 100644
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -52,6 +52,7 @@ obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
+ obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
+ obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
++obj-$(CONFIG_I2C_ATMELTWI)	+= i2c-atmeltwi.o
+ 
+ ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+ EXTRA_CFLAGS += -DDEBUG
+diff --git a/drivers/i2c/busses/i2c-atmeltwi.c b/drivers/i2c/busses/i2c-atmeltwi.c
+new file mode 100644
+index 0000000..3f78b31
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-atmeltwi.c
+@@ -0,0 +1,436 @@
++/*
++ * i2c Support for Atmel's Two-Wire Interface (TWI)
++ *
++ * Based on the work of Copyright (C) 2004 Rick Bronson
++ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
++ * Ported to AVR32 and heavily modified by Espen Krangnes
++ * <ekrangnes at atmel.com>
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * Borrowed heavily from the original work by:
++ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
++ *
++ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
++ * bugs removed, interrupt routine markedly rewritten
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++#undef VERBOSE_DEBUG
++
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/i2c.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/completion.h>
++#include <linux/io.h>
++
++#include "i2c-atmeltwi.h"
++
++static unsigned int baudrate = 100 * 1000;
++module_param(baudrate, uint, S_IRUGO);
++MODULE_PARM_DESC(baudrate, "The TWI baudrate");
++
++
++struct atmel_twi {
++	void __iomem *regs;
++	struct i2c_adapter adapter;
++	struct clk *pclk;
++	struct completion comp;
++	u32 mask;
++	u8 *buf;
++	u16 len;
++	u16 acks_left;
++	int status;
++	unsigned int irq;
++
++};
++#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
++
++/*
++ * (Re)Initialize the TWI hardware registers.
++ */
++static int twi_hwinit(struct atmel_twi *twi)
++{
++	unsigned long cdiv, ckdiv = 0;
++
++	/* REVISIT: wait till SCL is high before resetting; otherwise,
++	 * some versions will wedge forever.
++	 */
++
++	twi_writel(twi, IDR, ~0UL);
++	twi_writel(twi, CR, TWI_BIT(SWRST));	/*Reset peripheral*/
++	twi_readl(twi, SR);
++
++	cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
++
++	while (cdiv > 255) {
++		ckdiv++;
++		cdiv = cdiv >> 1;
++	}
++
++	/* REVISIT: there are various errata to consider re CDIV and CHDIV
++	 * here, at least on at91 parts.
++	 */
++
++	if (ckdiv > 7)
++		return -EINVAL;
++	else
++		twi_writel(twi, CWGR, TWI_BF(CKDIV, ckdiv)
++				| TWI_BF(CHDIV, cdiv)
++				| TWI_BF(CLDIV, cdiv));
++	return 0;
++}
++
++/*
++ * Waits for the i2c status register to set the specified bitmask
++ * Returns 0 if timed out ... ~100ms is much longer than the SMBus
++ * limit, but I2C has no limit at all.
++ */
++static int twi_complete(struct atmel_twi *twi, u32 mask)
++{
++	int timeout = msecs_to_jiffies(100);
++
++	mask |= TWI_BIT(TXCOMP);
++	twi->mask = mask | TWI_BIT(NACK) | TWI_BIT(OVRE);
++	init_completion(&twi->comp);
++
++	twi_writel(twi, IER, mask);
++
++	if (!wait_for_completion_timeout(&twi->comp, timeout)) {
++		/* RESET TWI interface */
++		twi_writel(twi, CR, TWI_BIT(SWRST));
++
++		/* Reinitialize TWI */
++		twi_hwinit(twi);
++
++		return -ETIMEDOUT;
++	}
++	return 0;
++}
++
++/*
++ * Generic i2c master transfer entrypoint.
++ */
++static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num)
++{
++	struct atmel_twi *twi = to_atmel_twi(adap);
++	int i;
++
++	dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
++
++	twi->status = 0;
++	for (i = 0; i < num; i++, pmsg++) {
++		twi->len = pmsg->len;
++		twi->buf = pmsg->buf;
++		twi->acks_left = pmsg->len;
++		twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
++			(pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
++		twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
++
++		dev_dbg(&adap->dev,
++			"#%d: %s %d byte%s %s dev 0x%02x\n",
++			i,
++			pmsg->flags & I2C_M_RD ? "reading" : "writing",
++			pmsg->len,
++			pmsg->len > 1 ? "s" : "",
++			pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
++
++		/* enable */
++		twi_writel(twi, CR, TWI_BIT(MSEN));
++
++		if (pmsg->flags & I2C_M_RD) {
++			/* cleanup after previous RX overruns */
++			while (twi_readl(twi, SR) & TWI_BIT(RXRDY))
++				twi_readl(twi, RHR);
++
++			if (twi->len == 1)
++				twi_writel(twi, CR,
++					TWI_BIT(START) | TWI_BIT(STOP));
++			else
++				twi_writel(twi, CR, TWI_BIT(START));
++
++			if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
++				dev_dbg(&adap->dev, "RX[%d] timeout. "
++					"Stopped with %d bytes left\n",
++					i, twi->acks_left);
++				return -ETIMEDOUT;
++			}
++		} else {
++			twi_writel(twi, THR, twi->buf[0]);
++			twi->acks_left--;
++			/* REVISIT: some chips don't start automagically:
++			 * twi_writel(twi, CR, TWI_BIT(START));
++			 */
++			if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
++				dev_dbg(&adap->dev, "TX[%d] timeout. "
++					"Stopped with %d bytes left\n",
++					i, twi->acks_left);
++				return -ETIMEDOUT;
++			}
++			/* REVISIT: an erratum workaround may be needed here;
++			 * see sam9261 "STOP not generated" (START either).
++			 */
++		}
++
++		/* Disable TWI interface */
++		twi_writel(twi, CR, TWI_BIT(MSDIS));
++
++		if (twi->status)
++			return twi->status;
++
++		/* WARNING:  This driver lies about properly supporting
++		 * repeated start, or it would *ALWAYS* return here.  It
++		 * has issued a STOP.  Continuing is a false claim -- that
++		 * a second (or third, etc.) message is part of the same
++		 * "combined" (no STOPs between parts) message.
++		 */
++
++	} /* end cur msg */
++
++	return i;
++}
++
++
++static irqreturn_t twi_interrupt(int irq, void *dev_id)
++{
++	struct atmel_twi *twi = dev_id;
++	int status = twi_readl(twi, SR);
++
++	/* Save state for later debug prints */
++	int old_status = status;
++
++	if (twi->mask & status) {
++
++		status &= twi->mask;
++
++		if (status & TWI_BIT(RXRDY)) {
++			if ((status & TWI_BIT(OVRE)) && twi->acks_left) {
++				/* Note weakness in fault reporting model:
++				 * we can't say "the first N of these data
++				 * bytes are valid".
++				 */
++				dev_err(&twi->adapter.dev,
++					"OVERRUN RX! %04x, lost %d\n",
++					old_status, twi->acks_left);
++				twi->acks_left = 0;
++				twi_writel(twi, CR, TWI_BIT(STOP));
++				twi->status = -EOVERFLOW;
++			} else if (twi->acks_left > 0) {
++				twi->buf[twi->len - twi->acks_left] =
++					twi_readl(twi, RHR);
++				twi->acks_left--;
++			}
++			if (status & TWI_BIT(TXCOMP))
++				goto done;
++			if (twi->acks_left == 1)
++				twi_writel(twi, CR, TWI_BIT(STOP));
++
++		} else if (status & (TWI_BIT(NACK) | TWI_BIT(TXCOMP))) {
++			goto done;
++
++		} else if (status & TWI_BIT(TXRDY)) {
++			if (twi->acks_left > 0) {
++				twi->acks_left--;
++				twi_writel(twi, THR,
++					twi->buf[twi->len - twi->acks_left]);
++			} else
++				twi_writel(twi, CR, TWI_BIT(STOP));
++		}
++
++		if (twi->acks_left == 0)
++			twi_writel(twi, IDR, ~TWI_BIT(TXCOMP));
++	}
++
++	/* enabling this message helps trigger overruns/underruns ... */
++	dev_vdbg(&twi->adapter.dev,
++		"ISR: SR 0x%04X, mask 0x%04X, acks %i\n",
++		old_status,
++		twi->acks_left ? twi->mask : TWI_BIT(TXCOMP),
++		twi->acks_left);
++
++	return IRQ_HANDLED;
++
++done:
++	/* Note weak fault reporting model:  we can't report how many
++	 * bytes we sent before the NAK, or let upper layers choose
++	 * whether to continue.  The I2C stack doesn't allow that...
++	 */
++	if (status & TWI_BIT(NACK)) {
++		dev_dbg(&twi->adapter.dev, "NACK received! %d to go\n",
++			twi->acks_left);
++		twi->status = -EPIPE;
++
++	/* TX underrun morphs automagically into a premature STOP;
++	 * we'll probably observe UVRE even when it's not documented.
++	 */
++	} else if (twi->acks_left && (twi->mask & TWI_BIT(TXRDY))) {
++		dev_err(&twi->adapter.dev, "UNDERRUN TX!  %04x, %d to go\n",
++			old_status, twi->acks_left);
++		twi->status = -ENOSR;
++	}
++
++	twi_writel(twi, IDR, ~0UL);
++	complete(&twi->comp);
++
++	dev_dbg(&twi->adapter.dev, "ISR: SR 0x%04X, acks %i --> %d\n",
++		old_status, twi->acks_left, twi->status);
++
++	return IRQ_HANDLED;
++}
++
++
++/*
++ * Return list of supported functionality.
++ *
++ * NOTE:  see warning above about repeated starts; this driver is falsely
++ * claiming to support "combined" transfers.  The mid-message STOPs mean
++ * some slaves will never work with this driver.  (Use i2c-gpio...)
++ */
++static u32 twi_func(struct i2c_adapter *adapter)
++{
++	return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL)
++		& ~I2C_FUNC_SMBUS_QUICK;
++}
++
++static struct i2c_algorithm twi_algorithm = {
++	.master_xfer	= twi_xfer,
++	.functionality	= twi_func,
++};
++
++/*
++ * Main initialization routine.
++ */
++static int __init twi_probe(struct platform_device *pdev)
++{
++	struct atmel_twi *twi;
++	struct resource *regs;
++	struct clk *pclk;
++	struct i2c_adapter *adapter;
++	int rc, irq;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs)
++		return -ENXIO;
++
++	pclk = clk_get(&pdev->dev, "pclk");
++	if (IS_ERR(pclk))
++		return PTR_ERR(pclk);
++	clk_enable(pclk);
++
++	rc = -ENOMEM;
++	twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
++	if (!twi) {
++		dev_dbg(&pdev->dev, "can't allocate interface!\n");
++		goto err_alloc_twi;
++	}
++
++	twi->pclk = pclk;
++	twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!twi->regs)
++		goto err_ioremap;
++
++	irq = platform_get_irq(pdev, 0);
++	rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
++	if (rc) {
++		dev_dbg(&pdev->dev, "can't bind irq!\n");
++		goto err_irq;
++	}
++	twi->irq = irq;
++
++	rc = twi_hwinit(twi);
++	if (rc) {
++		dev_err(&pdev->dev, "Unable to set baudrate\n");
++		goto err_hw_init;
++	}
++
++	adapter = &twi->adapter;
++	sprintf(adapter->name, "TWI");
++	adapter->algo = &twi_algorithm;
++	adapter->class = I2C_CLASS_ALL;
++	adapter->nr = pdev->id;
++	adapter->dev.parent = &pdev->dev;
++
++	platform_set_drvdata(pdev, twi);
++
++	rc = i2c_add_numbered_adapter(adapter);
++	if (rc) {
++		dev_dbg(&pdev->dev, "Adapter %s registration failed\n",
++			adapter->name);
++		goto err_register;
++	}
++
++	dev_info(&pdev->dev,
++		"Atmel TWI/I2C adapter (baudrate %dk) at 0x%08lx.\n",
++		 baudrate/1000, (unsigned long)regs->start);
++
++	return 0;
++
++
++err_register:
++	platform_set_drvdata(pdev, NULL);
++
++err_hw_init:
++	free_irq(irq, twi);
++
++err_irq:
++	iounmap(twi->regs);
++
++err_ioremap:
++	kfree(twi);
++
++err_alloc_twi:
++	clk_disable(pclk);
++	clk_put(pclk);
++
++	return rc;
++}
++
++static int __exit twi_remove(struct platform_device *pdev)
++{
++	struct atmel_twi *twi = platform_get_drvdata(pdev);
++	int res;
++
++	platform_set_drvdata(pdev, NULL);
++	res = i2c_del_adapter(&twi->adapter);
++	twi_writel(twi, CR, TWI_BIT(MSDIS));
++	iounmap(twi->regs);
++	clk_disable(twi->pclk);
++	clk_put(twi->pclk);
++	free_irq(twi->irq, twi);
++	kfree(twi);
++
++	return res;
++}
++
++static struct platform_driver twi_driver = {
++	.remove		= __exit_p(twi_remove),
++	.driver		= {
++		.name	= "atmel_twi",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init atmel_twi_init(void)
++{
++	return platform_driver_probe(&twi_driver, twi_probe);
++}
++
++static void __exit atmel_twi_exit(void)
++{
++	platform_driver_unregister(&twi_driver);
++}
++
++module_init(atmel_twi_init);
++module_exit(atmel_twi_exit);
++
++MODULE_AUTHOR("Espen Krangnes");
++MODULE_DESCRIPTION("I2C driver for Atmel TWI");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/i2c/busses/i2c-atmeltwi.h b/drivers/i2c/busses/i2c-atmeltwi.h
+new file mode 100644
+index 0000000..1aca065
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-atmeltwi.h
+@@ -0,0 +1,117 @@
++/*
++ * Register definitions for the Atmel Two-Wire Interface
++ */
++
++#ifndef __ATMELTWI_H__
++#define __ATMELTWI_H__
++
++/* TWI register offsets */
++#define TWI_CR					0x0000
++#define TWI_MMR					0x0004
++#define TWI_SMR					0x0008
++#define TWI_IADR				0x000c
++#define TWI_CWGR				0x0010
++#define TWI_SR					0x0020
++#define TWI_IER					0x0024
++#define TWI_IDR					0x0028
++#define TWI_IMR					0x002c
++#define TWI_RHR					0x0030
++#define TWI_THR					0x0034
++
++/* Bitfields in CR */
++#define TWI_START_OFFSET			0
++#define TWI_START_SIZE				1
++#define TWI_STOP_OFFSET				1
++#define TWI_STOP_SIZE				1
++#define TWI_MSEN_OFFSET				2
++#define TWI_MSEN_SIZE				1
++#define TWI_MSDIS_OFFSET			3
++#define TWI_MSDIS_SIZE				1
++#define TWI_SVEN_OFFSET				4
++#define TWI_SVEN_SIZE				1
++#define TWI_SVDIS_OFFSET			5
++#define TWI_SVDIS_SIZE				1
++#define TWI_SWRST_OFFSET			7
++#define TWI_SWRST_SIZE				1
++
++/* Bitfields in MMR */
++#define TWI_IADRSZ_OFFSET			8
++#define TWI_IADRSZ_SIZE				2
++#define TWI_MREAD_OFFSET			12
++#define TWI_MREAD_SIZE				1
++#define TWI_DADR_OFFSET				16
++#define TWI_DADR_SIZE				7
++
++/* Bitfields in SMR */
++#define TWI_SADR_OFFSET				16
++#define TWI_SADR_SIZE				7
++
++/* Bitfields in IADR */
++#define TWI_IADR_OFFSET				0
++#define TWI_IADR_SIZE				24
++
++/* Bitfields in CWGR */
++#define TWI_CLDIV_OFFSET			0
++#define TWI_CLDIV_SIZE				8
++#define TWI_CHDIV_OFFSET			8
++#define TWI_CHDIV_SIZE				8
++#define TWI_CKDIV_OFFSET			16
++#define TWI_CKDIV_SIZE				3
++
++/* Bitfields in SR */
++#define TWI_TXCOMP_OFFSET			0
++#define TWI_TXCOMP_SIZE				1
++#define TWI_RXRDY_OFFSET			1
++#define TWI_RXRDY_SIZE				1
++#define TWI_TXRDY_OFFSET			2
++#define TWI_TXRDY_SIZE				1
++#define TWI_SVDIR_OFFSET			3
++#define TWI_SVDIR_SIZE				1
++#define TWI_SVACC_OFFSET			4
++#define TWI_SVACC_SIZE				1
++#define TWI_GCACC_OFFSET			5
++#define TWI_GCACC_SIZE				1
++#define TWI_OVRE_OFFSET				6
++#define TWI_OVRE_SIZE				1
++#define TWI_UNRE_OFFSET				7
++#define TWI_UNRE_SIZE				1
++#define TWI_NACK_OFFSET				8
++#define TWI_NACK_SIZE				1
++#define TWI_ARBLST_OFFSET			9
++#define TWI_ARBLST_SIZE				1
++
++/* Bitfields in RHR */
++#define TWI_RXDATA_OFFSET			0
++#define TWI_RXDATA_SIZE				8
++
++/* Bitfields in THR */
++#define TWI_TXDATA_OFFSET			0
++#define TWI_TXDATA_SIZE				8
++
++/* Constants for IADRSZ */
++#define TWI_IADRSZ_NO_ADDR			0
++#define TWI_IADRSZ_ONE_BYTE			1
++#define TWI_IADRSZ_TWO_BYTES			2
++#define TWI_IADRSZ_THREE_BYTES			3
++
++/* Bit manipulation macros */
++#define TWI_BIT(name)					\
++	(1 << TWI_##name##_OFFSET)
++#define TWI_BF(name, value)				\
++	(((value) & ((1 << TWI_##name##_SIZE) - 1))	\
++	 << TWI_##name##_OFFSET)
++#define TWI_BFEXT(name, value)				\
++	(((value) >> TWI_##name##_OFFSET)		\
++	 & ((1 << TWI_##name##_SIZE) - 1))
++#define TWI_BFINS(name, value, old)			\
++	(((old) & ~(((1 << TWI_##name##_SIZE) - 1)	\
++		    << TWI_##name##_OFFSET))		\
++	 | TWI_BF(name, (value)))
++
++/* Register access macros */
++#define twi_readl(port, reg)				\
++	__raw_readl((port)->regs + TWI_##reg)
++#define twi_writel(port, reg, value)			\
++	__raw_writel((value), (port)->regs + TWI_##reg)
++
++#endif /* __ATMELTWI_H__ */
+diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
+index 73e248f..9e848cc 100644
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -202,5 +202,14 @@ config THINKPAD_ACPI_BAY
+ 
+ 	  If you are not sure, say Y here.
+ 
++config ATMEL_SSC
++	tristate "Device driver for Atmel SSC peripheral"
++	depends on AVR32 || ARCH_AT91
++	---help---
++	  This option enables device driver support for Atmel Syncronized
++	  Serial Communication peripheral (SSC).
++
++	  The SSC peripheral supports a wide variety of serial frame based
++	  communications, i.e. I2S, SPI, etc.
+ 
+ endif # MISC_DEVICES
+diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
+index b5ce0e3..40d8ed1 100644
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -15,3 +15,4 @@ obj-$(CONFIG_SGI_IOC4)		+= ioc4.o
+ obj-$(CONFIG_SONY_LAPTOP)	+= sony-laptop.o
+ obj-$(CONFIG_THINKPAD_ACPI)	+= thinkpad_acpi.o
+ obj-$(CONFIG_EEPROM_93CX6)	+= eeprom_93cx6.o
++obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
+diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
+new file mode 100644
+index 0000000..058ccac
+--- /dev/null
++++ b/drivers/misc/atmel-ssc.c
+@@ -0,0 +1,174 @@
++/*
++ * Atmel SSC driver
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/list.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/list.h>
++#include <linux/spinlock.h>
++#include <linux/atmel-ssc.h>
++
++/* Serialize access to ssc_list and user count */
++static DEFINE_SPINLOCK(user_lock);
++static LIST_HEAD(ssc_list);
++
++struct ssc_device *ssc_request(unsigned int ssc_num)
++{
++	int ssc_valid = 0;
++	struct ssc_device *ssc;
++
++	spin_lock(&user_lock);
++	list_for_each_entry(ssc, &ssc_list, list) {
++		if (ssc->pdev->id == ssc_num) {
++			ssc_valid = 1;
++			break;
++		}
++	}
++
++	if (!ssc_valid) {
++		spin_unlock(&user_lock);
++		dev_dbg(&ssc->pdev->dev, "could not find requested device\n");
++		return ERR_PTR(-ENODEV);
++	}
++
++	if (ssc->user) {
++		spin_unlock(&user_lock);
++		dev_dbg(&ssc->pdev->dev, "module busy\n");
++		return ERR_PTR(-EBUSY);
++	}
++	ssc->user++;
++	spin_unlock(&user_lock);
++
++	clk_enable(ssc->clk);
++
++	return ssc;
++}
++EXPORT_SYMBOL(ssc_request);
++
++void ssc_free(struct ssc_device *ssc)
++{
++	spin_lock(&user_lock);
++	if (ssc->user) {
++		ssc->user--;
++		clk_disable(ssc->clk);
++	} else {
++		dev_dbg(&ssc->pdev->dev, "device already free\n");
++	}
++	spin_unlock(&user_lock);
++}
++EXPORT_SYMBOL(ssc_free);
++
++static int __init ssc_probe(struct platform_device *pdev)
++{
++	int retval = 0;
++	struct resource *regs;
++	struct ssc_device *ssc;
++
++	ssc = kzalloc(sizeof(struct ssc_device), GFP_KERNEL);
++	if (!ssc) {
++		dev_dbg(&pdev->dev, "out of memory\n");
++		retval = -ENOMEM;
++		goto out;
++	}
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs) {
++		dev_dbg(&pdev->dev, "no mmio resource defined\n");
++		retval = -ENXIO;
++		goto out_free;
++	}
++
++	ssc->clk = clk_get(&pdev->dev, "pclk");
++	if (IS_ERR(ssc->clk)) {
++		dev_dbg(&pdev->dev, "no pclk clock defined\n");
++		retval = -ENXIO;
++		goto out_free;
++	}
++
++	ssc->pdev = pdev;
++	ssc->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!ssc->regs) {
++		dev_dbg(&pdev->dev, "ioremap failed\n");
++		retval = -EINVAL;
++		goto out_clk;
++	}
++
++	/* disable all interrupts */
++	clk_enable(ssc->clk);
++	ssc_writel(ssc->regs, IDR, ~0UL);
++	ssc_readl(ssc->regs, SR);
++	clk_disable(ssc->clk);
++
++	ssc->irq = platform_get_irq(pdev, 0);
++	if (!ssc->irq) {
++		dev_dbg(&pdev->dev, "could not get irq\n");
++		retval = -ENXIO;
++		goto out_unmap;
++	}
++
++	spin_lock(&user_lock);
++	list_add_tail(&ssc->list, &ssc_list);
++	spin_unlock(&user_lock);
++
++	platform_set_drvdata(pdev, ssc);
++
++	dev_info(&pdev->dev, "Atmel SSC device at 0x%p (irq %d)\n",
++			ssc->regs, ssc->irq);
++
++	goto out;
++
++out_unmap:
++	iounmap(ssc->regs);
++out_clk:
++	clk_put(ssc->clk);
++out_free:
++	kfree(ssc);
++out:
++	return retval;
++}
++
++static int __devexit ssc_remove(struct platform_device *pdev)
++{
++	struct ssc_device *ssc = platform_get_drvdata(pdev);
++
++	spin_lock(&user_lock);
++	iounmap(ssc->regs);
++	clk_put(ssc->clk);
++	list_del(&ssc->list);
++	kfree(ssc);
++	spin_unlock(&user_lock);
++
++	return 0;
++}
++
++static struct platform_driver ssc_driver = {
++	.remove		= __devexit_p(ssc_remove),
++	.driver		= {
++		.name		= "ssc",
++	},
++};
++
++static int __init ssc_init(void)
++{
++	return platform_driver_probe(&ssc_driver, ssc_probe);
++}
++module_init(ssc_init);
++
++static void __exit ssc_exit(void)
++{
++	platform_driver_unregister(&ssc_driver);
++}
++module_exit(ssc_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("SSC driver for Atmel AVR32 and AT91");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
+index e23082f..1de1716 100644
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -74,6 +74,16 @@ config MMC_AT91
+ 
+ 	  If unsure, say N.
+ 
++config MMC_ATMELMCI
++	tristate "Atmel Multimedia Card Interface support"
++	depends on AVR32 && MMC
++	help
++	  This selects the Atmel Multimedia Card Interface. If you have
++	  a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
++	  slot, say Y or M here.
++
++	  If unsure, say N.
++
+ config MMC_IMX
+ 	tristate "Motorola i.MX Multimedia Card Interface support"
+ 	depends on ARCH_IMX
+diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
+index 6685f64..4b8e6e2 100644
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -14,5 +14,6 @@ obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
+ obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP)		+= omap.o
+ obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
++obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
+ obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
+ 
+diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
+new file mode 100644
+index 0000000..6792ad9
+--- /dev/null
++++ b/drivers/mmc/host/atmel-mci.c
+@@ -0,0 +1,1176 @@
++/*
++ * Atmel MultiMedia Card Interface driver
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/blkdev.h>
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/ioport.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <linux/mmc/host.h>
++
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++#include "atmel-mci.h"
++
++#define DRIVER_NAME "atmel_mci"
++
++#define MCI_DATA_ERROR_FLAGS	(MCI_BIT(DCRCE) | MCI_BIT(DTOE) |	\
++				 MCI_BIT(OVRE) | MCI_BIT(UNRE))
++
++enum {
++	EVENT_CMD_COMPLETE = 0,
++	EVENT_DATA_COMPLETE,
++	EVENT_DATA_ERROR,
++	EVENT_STOP_SENT,
++	EVENT_STOP_COMPLETE,
++	EVENT_DMA_COMPLETE,
++	EVENT_DMA_ERROR,
++	EVENT_CARD_DETECT,
++};
++
++struct atmel_mci_dma {
++	struct dma_request_sg	req;
++	unsigned short		rx_periph_id;
++	unsigned short		tx_periph_id;
++};
++
++struct atmel_mci {
++	struct mmc_host		*mmc;
++	void __iomem		*regs;
++	struct atmel_mci_dma	dma;
++
++	struct mmc_request	*mrq;
++	struct mmc_command	*cmd;
++	struct mmc_data		*data;
++
++	u32			cmd_status;
++	u32			data_status;
++	u32			stop_status;
++	u32			stop_cmdr;
++
++	struct tasklet_struct	tasklet;
++	unsigned long		pending_events;
++	unsigned long		completed_events;
++
++	int			present;
++	int			detect_pin;
++	int			wp_pin;
++
++	unsigned long		bus_hz;
++	unsigned long		mapbase;
++	struct clk		*mck;
++	struct platform_device	*pdev;
++
++#ifdef CONFIG_DEBUG_FS
++	struct dentry		*debugfs_root;
++	struct dentry		*debugfs_regs;
++	struct dentry		*debugfs_req;
++	struct dentry		*debugfs_pending_events;
++	struct dentry		*debugfs_completed_events;
++#endif
++};
++
++/* Those printks take an awful lot of time... */
++#ifndef DEBUG
++static unsigned int fmax = 15000000U;
++#else
++static unsigned int fmax = 1000000U;
++#endif
++module_param(fmax, uint, 0444);
++MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
++
++/* Test bit macros for completed events */
++#define mci_cmd_is_complete(host)			\
++	test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_data_is_complete(host)			\
++	test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_data_error_is_complete(host)		\
++	test_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_stop_sent_is_complete(host)			\
++	test_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_stop_is_complete(host)			\
++	test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_dma_is_complete(host)			\
++	test_bit(EVENT_DMA_COMPLETE, &host->completed_events)
++#define mci_dma_error_is_complete(host)			\
++	test_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_card_detect_is_complete(host)			\
++	test_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Test and clear bit macros for pending events */
++#define mci_clear_cmd_is_pending(host)			\
++	test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_clear_data_is_pending(host)			\
++	test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_clear_data_error_is_pending(host)		\
++	test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_clear_stop_sent_is_pending(host)		\
++	test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_clear_stop_is_pending(host)			\
++	test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_clear_dma_error_is_pending(host)		\
++	test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_clear_card_detect_is_pending(host)		\
++	test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++/* Test and set bit macros for completed events */
++#define mci_set_cmd_is_completed(host)			\
++	test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_set_data_is_completed(host)			\
++	test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_set_data_error_is_completed(host)		\
++	test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_set_stop_sent_is_completed(host)		\
++	test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_set_stop_is_completed(host)			\
++	test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_dma_error_is_completed(host)		\
++	test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_set_card_detect_is_completed(host)		\
++	test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Set bit macros for completed events */
++#define mci_set_cmd_complete(host)			\
++	set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_set_data_complete(host)			\
++	set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_set_data_error_complete(host)		\
++	set_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_set_stop_sent_complete(host)		\
++	set_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_set_stop_complete(host)			\
++	set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_dma_complete(host)			\
++	set_bit(EVENT_DMA_COMPLETE, &host->completed_events)
++#define mci_set_dma_error_complete(host)		\
++	set_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_set_card_detect_complete(host)		\
++	set_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Set bit macros for pending events */
++#define mci_set_cmd_pending(host)			\
++	set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_set_data_pending(host)			\
++	set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_set_data_error_pending(host)		\
++	set_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_set_stop_sent_pending(host)			\
++	set_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_set_stop_pending(host)			\
++	set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_set_dma_error_pending(host)			\
++	set_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_set_card_detect_pending(host)		\
++	set_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++/* Clear bit macros for pending events */
++#define mci_clear_cmd_pending(host)			\
++	clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_clear_data_pending(host)			\
++	clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_clear_data_error_pending(host)		\
++	clear_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_clear_stop_sent_pending(host)		\
++	clear_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_clear_stop_pending(host)			\
++	clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_clear_dma_error_pending(host)		\
++	clear_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_clear_card_detect_pending(host)		\
++	clear_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++
++#ifdef CONFIG_DEBUG_FS
++#include <linux/debugfs.h>
++
++#define DBG_REQ_BUF_SIZE	(4096 - sizeof(unsigned int))
++
++struct req_dbg_data {
++	unsigned int nbytes;
++	char str[DBG_REQ_BUF_SIZE];
++};
++
++static int req_dbg_open(struct inode *inode, struct file *file)
++{
++	struct atmel_mci *host;
++	struct mmc_request *mrq;
++	struct mmc_command *cmd, *stop;
++	struct mmc_data *data;
++	struct req_dbg_data *priv;
++	char *str;
++	unsigned long n = 0;
++
++	priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
++	if (!priv)
++		return -ENOMEM;
++	str = priv->str;
++
++	mutex_lock(&inode->i_mutex);
++	host = inode->i_private;
++
++	spin_lock_irq(&host->mmc->lock);
++	mrq = host->mrq;
++	if (mrq) {
++		cmd = mrq->cmd;
++		data = mrq->data;
++		stop = mrq->stop;
++		n = snprintf(str, DBG_REQ_BUF_SIZE,
++			     "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
++			     cmd->opcode, cmd->arg, cmd->flags,
++			     cmd->resp[0], cmd->resp[1], cmd->resp[2],
++			     cmd->resp[3], cmd->error);
++		if (n < DBG_REQ_BUF_SIZE && data)
++			n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
++				      "DATA %u * %u (%u) %x (err %u)\n",
++				      data->blocks, data->blksz,
++				      data->bytes_xfered, data->flags,
++				      data->error);
++		if (n < DBG_REQ_BUF_SIZE && stop)
++			n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
++				      "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
++				      stop->opcode, stop->arg, stop->flags,
++				      stop->resp[0], stop->resp[1],
++				      stop->resp[2], stop->resp[3],
++				      stop->error);
++	}
++	spin_unlock_irq(&host->mmc->lock);
++	mutex_unlock(&inode->i_mutex);
++
++	priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
++	file->private_data = priv;
++
++	return 0;
++}
++
++static ssize_t req_dbg_read(struct file *file, char __user *buf,
++			    size_t nbytes, loff_t *ppos)
++{
++	struct req_dbg_data *priv = file->private_data;
++
++	return simple_read_from_buffer(buf, nbytes, ppos,
++				       priv->str, priv->nbytes);
++}
++
++static int req_dbg_release(struct inode *inode, struct file *file)
++{
++	kfree(file->private_data);
++	return 0;
++}
++
++static const struct file_operations req_dbg_fops = {
++	.owner		= THIS_MODULE,
++	.open		= req_dbg_open,
++	.llseek		= no_llseek,
++	.read		= req_dbg_read,
++	.release	= req_dbg_release,
++};
++
++static int regs_dbg_open(struct inode *inode, struct file *file)
++{
++	struct atmel_mci *host;
++	unsigned int i;
++	u32 *data;
++	int ret = -ENOMEM;
++
++	mutex_lock(&inode->i_mutex);
++	host = inode->i_private;
++	data = kmalloc(inode->i_size, GFP_KERNEL);
++	if (!data)
++		goto out;
++
++	spin_lock_irq(&host->mmc->lock);
++	for (i = 0; i < inode->i_size / 4; i++)
++		data[i] = __raw_readl(host->regs + i * 4);
++	spin_unlock_irq(&host->mmc->lock);
++
++	file->private_data = data;
++	ret = 0;
++
++out:
++	mutex_unlock(&inode->i_mutex);
++
++	return ret;
++}
++
++static ssize_t regs_dbg_read(struct file *file, char __user *buf,
++			     size_t nbytes, loff_t *ppos)
++{
++	struct inode *inode = file->f_dentry->d_inode;
++	int ret;
++
++	mutex_lock(&inode->i_mutex);
++	ret = simple_read_from_buffer(buf, nbytes, ppos,
++				      file->private_data,
++				      file->f_dentry->d_inode->i_size);
++	mutex_unlock(&inode->i_mutex);
++
++	return ret;
++}
++
++static int regs_dbg_release(struct inode *inode, struct file *file)
++{
++	kfree(file->private_data);
++	return 0;
++}
++
++static const struct file_operations regs_dbg_fops = {
++	.owner		= THIS_MODULE,
++	.open		= regs_dbg_open,
++	.llseek		= generic_file_llseek,
++	.read		= regs_dbg_read,
++	.release	= regs_dbg_release,
++};
++
++static void atmci_init_debugfs(struct atmel_mci *host)
++{
++	struct mmc_host *mmc;
++	struct dentry *root, *regs;
++	struct resource *res;
++
++	mmc = host->mmc;
++	root = debugfs_create_dir(mmc_hostname(mmc), NULL);
++	if (IS_ERR(root) || !root)
++		goto err_root;
++	host->debugfs_root = root;
++
++	regs = debugfs_create_file("regs", 0400, root, host, &regs_dbg_fops);
++	if (!regs)
++		goto err_regs;
++
++	res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
++	regs->d_inode->i_size = res->end - res->start + 1;
++	host->debugfs_regs = regs;
++
++	host->debugfs_req = debugfs_create_file("req", 0400, root,
++						host, &req_dbg_fops);
++	if (!host->debugfs_req)
++		goto err_req;
++
++	host->debugfs_pending_events
++		= debugfs_create_u32("pending_events", 0400, root,
++				     (u32 *)&host->pending_events);
++	if (!host->debugfs_pending_events)
++		goto err_pending_events;
++
++	host->debugfs_completed_events
++		= debugfs_create_u32("completed_events", 0400, root,
++				     (u32 *)&host->completed_events);
++	if (!host->debugfs_completed_events)
++		goto err_completed_events;
++
++	return;
++
++err_completed_events:
++	debugfs_remove(host->debugfs_pending_events);
++err_pending_events:
++	debugfs_remove(host->debugfs_req);
++err_req:
++	debugfs_remove(host->debugfs_regs);
++err_regs:
++	debugfs_remove(host->debugfs_root);
++err_root:
++	host->debugfs_root = NULL;
++	dev_err(&host->pdev->dev,
++		"failed to initialize debugfs for %s\n",
++		mmc_hostname(mmc));
++}
++
++static void atmci_cleanup_debugfs(struct atmel_mci *host)
++{
++	if (host->debugfs_root) {
++		debugfs_remove(host->debugfs_completed_events);
++		debugfs_remove(host->debugfs_pending_events);
++		debugfs_remove(host->debugfs_req);
++		debugfs_remove(host->debugfs_regs);
++		debugfs_remove(host->debugfs_root);
++		host->debugfs_root = NULL;
++	}
++}
++#else
++static inline void atmci_init_debugfs(struct atmel_mci *host)
++{
++
++}
++
++static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
++{
++
++}
++#endif /* CONFIG_DEBUG_FS */
++
++static inline unsigned int ns_to_clocks(struct atmel_mci *host,
++					unsigned int ns)
++{
++	return (ns * (host->bus_hz / 1000000) + 999) / 1000;
++}
++
++static void atmci_set_timeout(struct atmel_mci *host,
++			      struct mmc_data *data)
++{
++	static unsigned dtomul_to_shift[] = {
++		0, 4, 7, 8, 10, 12, 16, 20
++	};
++	unsigned timeout;
++	unsigned dtocyc, dtomul;
++
++	timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
++
++	for (dtomul = 0; dtomul < 8; dtomul++) {
++		unsigned shift = dtomul_to_shift[dtomul];
++		dtocyc = (timeout + (1 << shift) - 1) >> shift;
++		if (dtocyc < 15)
++			break;
++	}
++
++	if (dtomul >= 8) {
++		dtomul = 7;
++		dtocyc = 15;
++	}
++
++	dev_dbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
++			dtocyc << dtomul_to_shift[dtomul]);
++	mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
++				| MCI_BF(DTOCYC, dtocyc)));
++}
++
++/*
++ * Return mask with command flags to be enabled for this command.
++ */
++static u32 atmci_prepare_command(struct mmc_host *mmc,
++				 struct mmc_command *cmd)
++{
++	u32 cmdr;
++
++	cmd->error = MMC_ERR_NONE;
++
++	cmdr = MCI_BF(CMDNB, cmd->opcode);
++
++	if (cmd->flags & MMC_RSP_PRESENT) {
++		if (cmd->flags & MMC_RSP_136)
++			cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
++		else
++			cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
++	}
++
++	/*
++	 * This should really be MAXLAT_5 for CMD2 and ACMD41, but
++	 * it's too difficult to determine whether this is an ACMD or
++	 * not. Better make it 64.
++	 */
++	cmdr |= MCI_BIT(MAXLAT);
++
++	if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
++		cmdr |= MCI_BIT(OPDCMD);
++
++	dev_dbg(&mmc->class_dev,
++		"cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
++		cmd->opcode, cmd->arg, cmd->flags, (unsigned long)cmdr);
++
++	return cmdr;
++}
++
++static void atmci_start_command(struct atmel_mci *host,
++				struct mmc_command *cmd,
++				u32 cmd_flags)
++{
++	WARN_ON(host->cmd);
++	host->cmd = cmd;
++
++	mci_writel(host, ARGR, cmd->arg);
++	mci_writel(host, CMDR, cmd_flags);
++
++	if (cmd->data)
++		dma_start_request(host->dma.req.req.dmac,
++				  host->dma.req.req.channel);
++}
++
++/*
++ * Returns a mask of flags to be set in the command register when the
++ * command to start the transfer is to be sent.
++ */
++static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
++{
++	struct atmel_mci *host = mmc_priv(mmc);
++	u32 cmd_flags;
++
++	WARN_ON(host->data);
++	host->data = data;
++
++	atmci_set_timeout(host, data);
++	mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
++				| MCI_BF(BLKLEN, data->blksz)));
++	host->dma.req.block_size = data->blksz;
++	host->dma.req.nr_blocks = data->blocks;
++
++	cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
++	if (data->flags & MMC_DATA_STREAM)
++		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
++	else if (data->blocks > 1)
++		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
++	else
++		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
++
++	if (data->flags & MMC_DATA_READ) {
++		cmd_flags |= MCI_BIT(TRDIR);
++		host->dma.req.nr_sg
++			= dma_map_sg(&host->pdev->dev, data->sg,
++				     data->sg_len, DMA_FROM_DEVICE);
++		host->dma.req.periph_id = host->dma.rx_periph_id;
++		host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
++		host->dma.req.data_reg = host->mapbase + MCI_RDR;
++	} else {
++		host->dma.req.nr_sg
++			= dma_map_sg(&host->pdev->dev, data->sg,
++				     data->sg_len, DMA_TO_DEVICE);
++		host->dma.req.periph_id = host->dma.tx_periph_id;
++		host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
++		host->dma.req.data_reg = host->mapbase + MCI_TDR;
++	}
++	host->dma.req.sg = data->sg;
++
++	dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
++
++	return cmd_flags;
++}
++
++static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++	struct atmel_mci *host = mmc_priv(mmc);
++	struct mmc_data *data = mrq->data;
++	u32 iflags;
++	u32 cmdflags = 0;
++
++	iflags = mci_readl(host, IMR);
++	if (iflags)
++		dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
++				mci_readl(host, IMR));
++
++	WARN_ON(host->mrq != NULL);
++	host->mrq = mrq;
++	host->pending_events = 0;
++	host->completed_events = 0;
++
++	iflags = MCI_BIT(CMDRDY);
++	cmdflags = atmci_prepare_command(mmc, mrq->cmd);
++
++	if (mrq->stop) {
++		WARN_ON(!data);
++
++		host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
++		host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
++		if (!(data->flags & MMC_DATA_WRITE))
++			host->stop_cmdr |= MCI_BIT(TRDIR);
++		if (data->flags & MMC_DATA_STREAM)
++			host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
++		else
++			host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
++	}
++	if (data) {
++		cmdflags |= atmci_prepare_data(mmc, data);
++		iflags |= MCI_DATA_ERROR_FLAGS;
++	}
++
++	atmci_start_command(host, mrq->cmd, cmdflags);
++	mci_writel(host, IER, iflags);
++}
++
++static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++	struct atmel_mci *host = mmc_priv(mmc);
++	u32 mr;
++
++	if (ios->clock) {
++		u32 clkdiv;
++
++		/* Set clock rate */
++		clkdiv = host->bus_hz / (2 * ios->clock) - 1;
++		if (clkdiv > 255) {
++			dev_warn(&mmc->class_dev,
++				"clock %u too slow; using %lu\n",
++				ios->clock, host->bus_hz / (2 * 256));
++			clkdiv = 255;
++		}
++
++		mr = mci_readl(host, MR);
++		mr = MCI_BFINS(CLKDIV, clkdiv, mr)
++			| MCI_BIT(WRPROOF) | MCI_BIT(RDPROOF);
++		mci_writel(host, MR, mr);
++
++		/* Enable the MCI controller */
++		mci_writel(host, CR, MCI_BIT(MCIEN));
++	} else {
++		/* Disable the MCI controller */
++		mci_writel(host, CR, MCI_BIT(MCIDIS));
++	}
++
++	switch (ios->bus_width) {
++	case MMC_BUS_WIDTH_1:
++		mci_writel(host, SDCR, 0);
++		break;
++	case MMC_BUS_WIDTH_4:
++		mci_writel(host, SDCR, MCI_BIT(SDCBUS));
++		break;
++	}
++
++	switch (ios->power_mode) {
++	case MMC_POWER_ON:
++		/* Send init sequence (74 clock cycles) */
++		mci_writel(host, IDR, ~0UL);
++		mci_writel(host, CMDR, MCI_BF(SPCMD, MCI_SPCMD_INIT_CMD));
++		while (!(mci_readl(host, SR) & MCI_BIT(CMDRDY)))
++			cpu_relax();
++		break;
++	default:
++		/*
++		 * TODO: None of the currently available AVR32-based
++		 * boards allow MMC power to be turned off. Implement
++		 * power control when this can be tested properly.
++		 */
++		break;
++	}
++}
++
++static int atmci_get_ro(struct mmc_host *mmc)
++{
++	int read_only = 0;
++	struct atmel_mci *host = mmc_priv(mmc);
++
++	if (host->wp_pin >= 0) {
++		read_only = gpio_get_value(host->wp_pin);
++		dev_dbg(&mmc->class_dev, "card is %s\n",
++				read_only ? "read-only" : "read-write");
++	} else {
++		dev_dbg(&mmc->class_dev,
++			"no pin for checking read-only switch."
++			" Assuming write-enable.\n");
++	}
++
++	return read_only;
++}
++
++static struct mmc_host_ops atmci_ops = {
++	.request	= atmci_request,
++	.set_ios	= atmci_set_ios,
++	.get_ro		= atmci_get_ro,
++};
++
++static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++	struct atmel_mci *host = mmc_priv(mmc);
++
++	WARN_ON(host->cmd || host->data);
++	host->mrq = NULL;
++
++	mmc_request_done(mmc, mrq);
++}
++
++static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
++			  u32 flags)
++{
++	struct atmel_mci *host = mmc_priv(mmc);
++
++	atmci_start_command(host, data->stop, host->stop_cmdr | flags);
++	mci_writel(host, IER, MCI_BIT(CMDRDY));
++}
++
++static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
++{
++	host->data = NULL;
++	dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
++		     ((data->flags & MMC_DATA_WRITE)
++		      ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
++
++	/*
++	 * Data might complete before command for very short transfers
++	 * (like READ_SCR)
++	 */
++	if (mci_cmd_is_complete(host)
++	    && (!data->stop || mci_stop_is_complete(host)))
++		atmci_request_end(host->mmc, data->mrq);
++}
++
++static void atmci_command_complete(struct atmel_mci *host,
++			struct mmc_command *cmd, u32 status)
++{
++	if (status & MCI_BIT(RTOE))
++		cmd->error = MMC_ERR_TIMEOUT;
++	else if ((cmd->flags & MMC_RSP_CRC)
++			&& (status & MCI_BIT(RCRCE)))
++		cmd->error = MMC_ERR_BADCRC;
++	else if (status & (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | MCI_BIT(RENDE)))
++		cmd->error = MMC_ERR_FAILED;
++
++	if (cmd->error != MMC_ERR_NONE) {
++		dev_dbg(&host->mmc->class_dev,
++				"command error: op=0x%x status=0x%08x\n",
++				cmd->opcode, status);
++
++		if (cmd->data) {
++			dma_stop_request(host->dma.req.req.dmac,
++					host->dma.req.req.channel);
++			mci_writel(host, IDR, MCI_BIT(NOTBUSY)
++					| MCI_DATA_ERROR_FLAGS);
++			host->data = NULL;
++		}
++	}
++}
++
++static void atmci_tasklet_func(unsigned long priv)
++{
++	struct mmc_host *mmc = (struct mmc_host *)priv;
++	struct atmel_mci *host = mmc_priv(mmc);
++	struct mmc_request *mrq = host->mrq;
++	struct mmc_data *data = host->data;
++
++	dev_vdbg(&mmc->class_dev,
++		"tasklet: pending/completed/mask %lx/%lx/%x\n",
++		 host->pending_events, host->completed_events,
++		 mci_readl(host, IMR));
++
++	if (mci_clear_cmd_is_pending(host)) {
++		mci_set_cmd_complete(host);
++		atmci_command_complete(host, mrq->cmd, host->cmd_status);
++		if (!host->data || mci_data_is_complete(host)
++		    || mci_data_error_is_complete(host))
++			atmci_request_end(mmc, mrq);
++	}
++	if (mci_clear_stop_is_pending(host)) {
++		mci_set_stop_complete(host);
++		atmci_command_complete(host, mrq->stop, host->stop_status);
++		if (mci_data_is_complete(host)
++		    || mci_data_error_is_complete(host))
++			atmci_request_end(mmc, mrq);
++	}
++	if (mci_clear_dma_error_is_pending(host)) {
++		mci_set_dma_error_complete(host);
++		mci_clear_data_pending(host);
++
++		/* DMA controller got bus error => invalid address */
++		data->error = MMC_ERR_INVALID;
++
++		dev_dbg(&mmc->class_dev, "dma error after %u bytes xfered\n",
++				host->data->bytes_xfered);
++
++		if (data->stop
++		    && !mci_set_stop_sent_is_completed(host))
++			/* TODO: Check if card is still present */
++			send_stop_cmd(host->mmc, data, 0);
++
++		atmci_data_complete(host, data);
++	}
++	if (mci_clear_data_error_is_pending(host)) {
++		u32 status = host->data_status;
++
++		mci_set_data_error_complete(host);
++		mci_clear_data_pending(host);
++
++		dma_stop_request(host->dma.req.req.dmac,
++				 host->dma.req.req.channel);
++
++		if (status & MCI_BIT(DCRCE)) {
++			dev_dbg(&mmc->class_dev, "data CRC error\n");
++			data->error = MMC_ERR_BADCRC;
++		} else if (status & MCI_BIT(DTOE)) {
++			dev_dbg(&mmc->class_dev, "data timeout error\n");
++			data->error = MMC_ERR_TIMEOUT;
++		} else {
++			dev_dbg(&mmc->class_dev, "data FIFO error\n");
++			data->error = MMC_ERR_FIFO;
++		}
++		dev_dbg(&mmc->class_dev, "bytes xfered: %u\n",
++				data->bytes_xfered);
++
++		if (data->stop
++		    && !mci_set_stop_sent_is_completed(host))
++			/* TODO: Check if card is still present */
++			send_stop_cmd(host->mmc, data, 0);
++
++		atmci_data_complete(host, data);
++	}
++	if (mci_clear_data_is_pending(host)) {
++		mci_set_data_complete(host);
++		data->bytes_xfered = data->blocks * data->blksz;
++		atmci_data_complete(host, data);
++	}
++	if (mci_clear_card_detect_is_pending(host)) {
++		/* Reset controller if card is gone */
++		if (!host->present) {
++			mci_writel(host, CR, MCI_BIT(SWRST));
++			mci_writel(host, IDR, ~0UL);
++			mci_writel(host, CR, MCI_BIT(MCIEN));
++		}
++
++		/* Clean up queue if present */
++		if (mrq) {
++			if (!mci_cmd_is_complete(host))
++				mrq->cmd->error = MMC_ERR_TIMEOUT;
++			if (mrq->data && !mci_data_is_complete(host)
++			    && !mci_data_error_is_complete(host)) {
++				dma_stop_request(host->dma.req.req.dmac,
++						host->dma.req.req.channel);
++				host->data->error = MMC_ERR_TIMEOUT;
++				atmci_data_complete(host, data);
++			}
++			if (mrq->stop && !mci_stop_is_complete(host))
++				mrq->stop->error = MMC_ERR_TIMEOUT;
++
++			host->cmd = NULL;
++			atmci_request_end(mmc, mrq);
++		}
++		mmc_detect_change(host->mmc, msecs_to_jiffies(100));
++	}
++}
++
++static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
++{
++	struct atmel_mci *host = mmc_priv(mmc);
++	struct mmc_command *cmd = host->cmd;
++
++	/*
++	 * Read the response now so that we're free to send a new
++	 * command immediately.
++	 */
++	cmd->resp[0] = mci_readl(host, RSPR);
++	cmd->resp[1] = mci_readl(host, RSPR);
++	cmd->resp[2] = mci_readl(host, RSPR);
++	cmd->resp[3] = mci_readl(host, RSPR);
++
++	mci_writel(host, IDR, MCI_BIT(CMDRDY));
++	host->cmd = NULL;
++
++	if (mci_stop_sent_is_complete(host)) {
++		host->stop_status = status;
++		mci_set_stop_pending(host);
++	} else {
++		if (host->mrq->stop && mci_dma_is_complete(host)
++				&& !mci_set_stop_sent_is_completed(host))
++			send_stop_cmd(host->mmc, host->data, 0);
++		host->cmd_status = status;
++		mci_set_cmd_pending(host);
++	}
++
++	tasklet_schedule(&host->tasklet);
++}
++
++static void atmci_xfer_complete(struct dma_request *_req)
++{
++	struct dma_request_sg *req = to_dma_request_sg(_req);
++	struct atmel_mci_dma *dma;
++	struct atmel_mci *host;
++	struct mmc_data *data;
++
++	dma = container_of(req, struct atmel_mci_dma, req);
++	host = container_of(dma, struct atmel_mci, dma);
++	data = host->data;
++
++	/*
++	 * This callback may be called before we see the CMDRDY
++	 * interrupt under heavy irq load (possibly caused by other
++	 * drivers) or when interrupts are disabled for a long time.
++	 */
++	mci_set_dma_complete(host);
++	if (data->stop && mci_cmd_is_complete(host)
++			&& !mci_set_stop_sent_is_completed(host))
++		send_stop_cmd(host->mmc, data, 0);
++
++	/*
++	 * Regardless of what the documentation says, we have to wait
++	 * for NOTBUSY even after block read operations.
++	 *
++	 * When the DMA transfer is complete, the controller may still
++	 * be reading the CRC from the card, i.e. the data transfer is
++	 * still in progress and we haven't seen all the potential
++	 * error bits yet.
++	 */
++	mci_writel(host, IER, MCI_BIT(NOTBUSY));
++}
++
++static void atmci_dma_error(struct dma_request *_req)
++{
++	struct dma_request_sg *req = to_dma_request_sg(_req);
++	struct atmel_mci_dma *dma;
++	struct atmel_mci *host;
++
++	dma = container_of(req, struct atmel_mci_dma, req);
++	host = container_of(dma, struct atmel_mci, dma);
++
++	mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++			       | MCI_DATA_ERROR_FLAGS));
++
++	mci_set_dma_error_pending(host);
++	tasklet_schedule(&host->tasklet);
++}
++
++static irqreturn_t atmci_interrupt(int irq, void *dev_id)
++{
++	struct mmc_host *mmc = dev_id;
++	struct atmel_mci *host = mmc_priv(mmc);
++	u32 status, mask, pending;
++
++	spin_lock(&mmc->lock);
++
++	status = mci_readl(host, SR);
++	mask = mci_readl(host, IMR);
++	pending = status & mask;
++
++	do {
++		if (pending & MCI_DATA_ERROR_FLAGS) {
++			mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++					       | MCI_DATA_ERROR_FLAGS));
++			host->data_status = status;
++			mci_set_data_error_pending(host);
++			tasklet_schedule(&host->tasklet);
++			break;
++		}
++		if (pending & MCI_BIT(CMDRDY))
++			atmci_cmd_interrupt(mmc, status);
++		if (pending & MCI_BIT(NOTBUSY)) {
++			mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++					       | MCI_DATA_ERROR_FLAGS));
++			mci_set_data_pending(host);
++			tasklet_schedule(&host->tasklet);
++		}
++
++		status = mci_readl(host, SR);
++		mask = mci_readl(host, IMR);
++		pending = status & mask;
++	} while (pending);
++
++	spin_unlock(&mmc->lock);
++
++	return IRQ_HANDLED;
++}
++
++static irqreturn_t atmci_detect_change(int irq, void *dev_id)
++{
++	struct mmc_host *mmc = dev_id;
++	struct atmel_mci *host = mmc_priv(mmc);
++
++	int present = !gpio_get_value(irq_to_gpio(irq));
++
++	if (present != host->present) {
++		dev_dbg(&mmc->class_dev, "card %s\n",
++			present ? "inserted" : "removed");
++		host->present = present;
++		mci_set_card_detect_pending(host);
++		tasklet_schedule(&host->tasklet);
++	}
++	return IRQ_HANDLED;
++}
++
++static int __devinit atmci_probe(struct platform_device *pdev)
++{
++	struct mci_platform_data *board;
++	struct atmel_mci *host;
++	struct mmc_host *mmc;
++	struct resource *regs;
++	int irq;
++	int ret;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs)
++		return -ENXIO;
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0)
++		return irq;
++
++	board = pdev->dev.platform_data;
++
++	mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
++	if (!mmc)
++		return -ENOMEM;
++
++	host = mmc_priv(mmc);
++	host->pdev = pdev;
++	host->mmc = mmc;
++	if (board) {
++		host->detect_pin = board->detect_pin;
++		host->wp_pin = board->wp_pin;
++	} else {
++		host->detect_pin = -1;
++		host->detect_pin = -1;
++	}
++
++	host->mck = clk_get(&pdev->dev, "mci_clk");
++	if (IS_ERR(host->mck)) {
++		ret = PTR_ERR(host->mck);
++		goto out_free_host;
++	}
++	clk_enable(host->mck);
++
++	ret = -ENOMEM;
++	host->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!host->regs)
++		goto out_disable_clk;
++
++	host->bus_hz = clk_get_rate(host->mck);
++	host->mapbase = regs->start;
++
++	mmc->ops = &atmci_ops;
++	mmc->f_min = (host->bus_hz + 511) / 512;
++	mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
++	mmc->ocr_avail	= MMC_VDD_32_33 | MMC_VDD_33_34;
++	mmc->caps |= MMC_CAP_4_BIT_DATA;
++
++	tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
++
++	ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
++	if (ret)
++		goto out_unmap;
++
++	/* Assume card is present if we don't have a detect pin */
++	host->present = 1;
++	if (host->detect_pin >= 0) {
++		if (gpio_request(host->detect_pin, "mmc_detect")) {
++			dev_dbg(&mmc->class_dev, "no detect pin available\n");
++			host->detect_pin = -1;
++		} else {
++			host->present = !gpio_get_value(host->detect_pin);
++		}
++	}
++	if (host->wp_pin >= 0) {
++		if (gpio_request(host->wp_pin, "mmc_wp")) {
++			dev_dbg(&mmc->class_dev, "no WP pin available\n");
++			host->wp_pin = -1;
++		}
++	}
++
++	/* TODO: Get this information from platform data */
++	ret = -ENOMEM;
++	host->dma.req.req.dmac = find_dma_controller(0);
++	if (!host->dma.req.req.dmac) {
++		dev_dbg(&mmc->class_dev, "no DMA controller available\n");
++		goto out_free_irq;
++	}
++	ret = dma_alloc_channel(host->dma.req.req.dmac);
++	if (ret < 0) {
++		dev_dbg(&mmc->class_dev, "unable to allocate DMA channel\n");
++		goto out_free_irq;
++	}
++	host->dma.req.req.channel = ret;
++	host->dma.req.width = DMA_WIDTH_32BIT;
++	host->dma.req.req.xfer_complete = atmci_xfer_complete;
++	host->dma.req.req.block_complete = NULL; // atmci_block_complete;
++	host->dma.req.req.error = atmci_dma_error;
++	host->dma.rx_periph_id = 0;
++	host->dma.tx_periph_id = 1;
++
++	mci_writel(host, CR, MCI_BIT(SWRST));
++	mci_writel(host, IDR, ~0UL);
++
++	platform_set_drvdata(pdev, host);
++
++	mmc_add_host(mmc);
++
++	if (host->detect_pin >= 0) {
++		ret = request_irq(gpio_to_irq(host->detect_pin),
++				  atmci_detect_change,
++				  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
++				  DRIVER_NAME, mmc);
++		if (ret) {
++			dev_dbg(&mmc->class_dev,
++				"could not request IRQ %d for detect pin\n",
++				gpio_to_irq(host->detect_pin));
++			gpio_free(host->detect_pin);
++			host->detect_pin = -1;
++		}
++	}
++
++	dev_info(&mmc->class_dev, "Atmel MCI controller at 0x%08lx irq %d\n",
++			host->mapbase, irq);
++
++	atmci_init_debugfs(host);
++
++	return 0;
++
++out_free_irq:
++	if (host->detect_pin >= 0)
++		gpio_free(host->detect_pin);
++	if (host->wp_pin >= 0)
++		gpio_free(host->wp_pin);
++	free_irq(irq, mmc);
++out_unmap:
++	iounmap(host->regs);
++out_disable_clk:
++	clk_disable(host->mck);
++	clk_put(host->mck);
++out_free_host:
++	mmc_free_host(mmc);
++	return ret;
++}
++
++static int __devexit atmci_remove(struct platform_device *pdev)
++{
++	struct atmel_mci *host = platform_get_drvdata(pdev);
++
++	platform_set_drvdata(pdev, NULL);
++
++	if (host) {
++		atmci_cleanup_debugfs(host);
++
++		if (host->detect_pin >= 0) {
++			free_irq(gpio_to_irq(host->detect_pin), host->mmc);
++			cancel_delayed_work(&host->mmc->detect);
++			gpio_free(host->detect_pin);
++		}
++
++		mmc_remove_host(host->mmc);
++
++		mci_writel(host, IDR, ~0UL);
++		mci_writel(host, CR, MCI_BIT(MCIDIS));
++		mci_readl(host, SR);
++
++		dma_release_channel(host->dma.req.req.dmac,
++				    host->dma.req.req.channel);
++
++		if (host->wp_pin >= 0)
++			gpio_free(host->wp_pin);
++
++		free_irq(platform_get_irq(pdev, 0), host->mmc);
++		iounmap(host->regs);
++
++		clk_disable(host->mck);
++		clk_put(host->mck);
++
++		mmc_free_host(host->mmc);
++	}
++	return 0;
++}
++
++static struct platform_driver atmci_driver = {
++	.probe		= atmci_probe,
++	.remove		= __devexit_p(atmci_remove),
++	.driver		= {
++		.name		= DRIVER_NAME,
++	},
++};
++
++static int __init atmci_init(void)
++{
++	return platform_driver_register(&atmci_driver);
++}
++
++static void __exit atmci_exit(void)
++{
++	platform_driver_unregister(&atmci_driver);
++}
++
++module_init(atmci_init);
++module_exit(atmci_exit);
++
++MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/mmc/host/atmel-mci.h b/drivers/mmc/host/atmel-mci.h
+new file mode 100644
+index 0000000..60d15c4
+--- /dev/null
++++ b/drivers/mmc/host/atmel-mci.h
+@@ -0,0 +1,192 @@
++/*
++ * Atmel MultiMedia Card Interface driver
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
++#define __DRIVERS_MMC_ATMEL_MCI_H__
++
++/* MCI register offsets */
++#define MCI_CR					0x0000
++#define MCI_MR					0x0004
++#define MCI_DTOR				0x0008
++#define MCI_SDCR				0x000c
++#define MCI_ARGR				0x0010
++#define MCI_CMDR				0x0014
++#define MCI_BLKR				0x0018
++#define MCI_RSPR				0x0020
++#define MCI_RSPR1				0x0024
++#define MCI_RSPR2				0x0028
++#define MCI_RSPR3				0x002c
++#define MCI_RDR					0x0030
++#define MCI_TDR					0x0034
++#define MCI_SR					0x0040
++#define MCI_IER					0x0044
++#define MCI_IDR					0x0048
++#define MCI_IMR					0x004c
++
++/* Bitfields in CR */
++#define MCI_MCIEN_OFFSET			0
++#define MCI_MCIEN_SIZE				1
++#define MCI_MCIDIS_OFFSET			1
++#define MCI_MCIDIS_SIZE				1
++#define MCI_PWSEN_OFFSET			2
++#define MCI_PWSEN_SIZE				1
++#define MCI_PWSDIS_OFFSET			3
++#define MCI_PWSDIS_SIZE				1
++#define MCI_SWRST_OFFSET			7
++#define MCI_SWRST_SIZE				1
++
++/* Bitfields in MR */
++#define MCI_CLKDIV_OFFSET			0
++#define MCI_CLKDIV_SIZE				8
++#define MCI_PWSDIV_OFFSET			8
++#define MCI_PWSDIV_SIZE				3
++#define MCI_RDPROOF_OFFSET			11
++#define MCI_RDPROOF_SIZE			1
++#define MCI_WRPROOF_OFFSET			12
++#define MCI_WRPROOF_SIZE			1
++#define MCI_DMAPADV_OFFSET			14
++#define MCI_DMAPADV_SIZE			1
++#define MCI_BLKLEN_OFFSET			16
++#define MCI_BLKLEN_SIZE				16
++
++/* Bitfields in DTOR */
++#define MCI_DTOCYC_OFFSET			0
++#define MCI_DTOCYC_SIZE				4
++#define MCI_DTOMUL_OFFSET			4
++#define MCI_DTOMUL_SIZE				3
++
++/* Bitfields in SDCR */
++#define MCI_SDCSEL_OFFSET			0
++#define MCI_SDCSEL_SIZE				4
++#define MCI_SDCBUS_OFFSET			7
++#define MCI_SDCBUS_SIZE				1
++
++/* Bitfields in ARGR */
++#define MCI_ARG_OFFSET				0
++#define MCI_ARG_SIZE				32
++
++/* Bitfields in CMDR */
++#define MCI_CMDNB_OFFSET			0
++#define MCI_CMDNB_SIZE				6
++#define MCI_RSPTYP_OFFSET			6
++#define MCI_RSPTYP_SIZE				2
++#define MCI_SPCMD_OFFSET			8
++#define MCI_SPCMD_SIZE				3
++#define MCI_OPDCMD_OFFSET			11
++#define MCI_OPDCMD_SIZE				1
++#define MCI_MAXLAT_OFFSET			12
++#define MCI_MAXLAT_SIZE				1
++#define MCI_TRCMD_OFFSET			16
++#define MCI_TRCMD_SIZE				2
++#define MCI_TRDIR_OFFSET			18
++#define MCI_TRDIR_SIZE				1
++#define MCI_TRTYP_OFFSET			19
++#define MCI_TRTYP_SIZE				2
++
++/* Bitfields in BLKR */
++#define MCI_BCNT_OFFSET				0
++#define MCI_BCNT_SIZE				16
++
++/* Bitfields in RSPRn */
++#define MCI_RSP_OFFSET				0
++#define MCI_RSP_SIZE				32
++
++/* Bitfields in SR/IER/IDR/IMR */
++#define MCI_CMDRDY_OFFSET			0
++#define MCI_CMDRDY_SIZE				1
++#define MCI_RXRDY_OFFSET			1
++#define MCI_RXRDY_SIZE				1
++#define MCI_TXRDY_OFFSET			2
++#define MCI_TXRDY_SIZE				1
++#define MCI_BLKE_OFFSET				3
++#define MCI_BLKE_SIZE				1
++#define MCI_DTIP_OFFSET				4
++#define MCI_DTIP_SIZE				1
++#define MCI_NOTBUSY_OFFSET			5
++#define MCI_NOTBUSY_SIZE			1
++#define MCI_ENDRX_OFFSET			6
++#define MCI_ENDRX_SIZE				1
++#define MCI_ENDTX_OFFSET			7
++#define MCI_ENDTX_SIZE				1
++#define MCI_RXBUFF_OFFSET			14
++#define MCI_RXBUFF_SIZE				1
++#define MCI_TXBUFE_OFFSET			15
++#define MCI_TXBUFE_SIZE				1
++#define MCI_RINDE_OFFSET			16
++#define MCI_RINDE_SIZE				1
++#define MCI_RDIRE_OFFSET			17
++#define MCI_RDIRE_SIZE				1
++#define MCI_RCRCE_OFFSET			18
++#define MCI_RCRCE_SIZE				1
++#define MCI_RENDE_OFFSET			19
++#define MCI_RENDE_SIZE				1
++#define MCI_RTOE_OFFSET				20
++#define MCI_RTOE_SIZE				1
++#define MCI_DCRCE_OFFSET			21
++#define MCI_DCRCE_SIZE				1
++#define MCI_DTOE_OFFSET				22
++#define MCI_DTOE_SIZE				1
++#define MCI_OVRE_OFFSET				30
++#define MCI_OVRE_SIZE				1
++#define MCI_UNRE_OFFSET				31
++#define MCI_UNRE_SIZE				1
++
++/* Constants for DTOMUL */
++#define MCI_DTOMUL_1_CYCLE			0
++#define MCI_DTOMUL_16_CYCLES			1
++#define MCI_DTOMUL_128_CYCLES			2
++#define MCI_DTOMUL_256_CYCLES			3
++#define MCI_DTOMUL_1024_CYCLES			4
++#define MCI_DTOMUL_4096_CYCLES			5
++#define MCI_DTOMUL_65536_CYCLES			6
++#define MCI_DTOMUL_1048576_CYCLES		7
++
++/* Constants for RSPTYP */
++#define MCI_RSPTYP_NO_RESP			0
++#define MCI_RSPTYP_48_BIT			1
++#define MCI_RSPTYP_136_BIT			2
++
++/* Constants for SPCMD */
++#define MCI_SPCMD_NO_SPEC_CMD			0
++#define MCI_SPCMD_INIT_CMD			1
++#define MCI_SPCMD_SYNC_CMD			2
++#define MCI_SPCMD_INT_CMD			4
++#define MCI_SPCMD_INT_RESP			5
++
++/* Constants for TRCMD */
++#define MCI_TRCMD_NO_TRANS			0
++#define MCI_TRCMD_START_TRANS			1
++#define MCI_TRCMD_STOP_TRANS			2
++
++/* Constants for TRTYP */
++#define MCI_TRTYP_BLOCK				0
++#define MCI_TRTYP_MULTI_BLOCK			1
++#define MCI_TRTYP_STREAM			2
++
++/* Bit manipulation macros */
++#define MCI_BIT(name)					\
++	(1 << MCI_##name##_OFFSET)
++#define MCI_BF(name,value)				\
++	(((value) & ((1 << MCI_##name##_SIZE) - 1))	\
++	 << MCI_##name##_OFFSET)
++#define MCI_BFEXT(name,value)				\
++	(((value) >> MCI_##name##_OFFSET)		\
++	 & ((1 << MCI_##name##_SIZE) - 1))
++#define MCI_BFINS(name,value,old)			\
++	(((old) & ~(((1 << MCI_##name##_SIZE) - 1)	\
++		    << MCI_##name##_OFFSET))		\
++	 | MCI_BF(name,value))
++
++/* Register access macros */
++#define mci_readl(port,reg)				\
++	__raw_readl((port)->regs + MCI_##reg)
++#define mci_writel(port,reg,value)			\
++	__raw_writel((value), (port)->regs + MCI_##reg)
++
++#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
+diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
+index 2f19fa7..94304ca 100644
+--- a/drivers/mtd/chips/cfi_cmdset_0001.c
++++ b/drivers/mtd/chips/cfi_cmdset_0001.c
+@@ -50,6 +50,7 @@
+ #define I82802AC	0x00ac
+ #define MANUFACTURER_ST         0x0020
+ #define M50LPW080       0x002F
++#define AT49BV640D	0x02de
+ 
+ static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+@@ -156,6 +157,47 @@ static void cfi_tell_features(struct cfi_pri_intelext *extp)
+ }
+ #endif
+ 
++/* Atmel chips don't use the same PRI format as Intel chips */
++static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
++{
++	struct map_info *map = mtd->priv;
++	struct cfi_private *cfi = map->fldrv_priv;
++	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
++	struct cfi_pri_atmel atmel_pri;
++	uint32_t features = 0;
++
++	/* Reverse byteswapping */
++	extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
++	extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
++	extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
++
++	memcpy(&atmel_pri, extp, sizeof(atmel_pri));
++	memset((char *)extp + 5, 0, sizeof(*extp) - 5);
++
++	printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
++
++	if (atmel_pri.Features & 0x01) /* chip erase supported */
++		features |= (1<<0);
++	if (atmel_pri.Features & 0x02) /* erase suspend supported */
++		features |= (1<<1);
++	if (atmel_pri.Features & 0x04) /* program suspend supported */
++		features |= (1<<2);
++	if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
++		features |= (1<<9);
++	if (atmel_pri.Features & 0x20) /* page mode read supported */
++		features |= (1<<7);
++	if (atmel_pri.Features & 0x40) /* queued erase supported */
++		features |= (1<<4);
++	if (atmel_pri.Features & 0x80) /* Protection bits supported */
++		features |= (1<<6);
++
++	extp->FeatureSupport = features;
++
++	/* burst write mode not supported */
++	cfi->cfiq->BufWriteTimeoutTyp = 0;
++	cfi->cfiq->BufWriteTimeoutMax = 0;
++}
++
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
+ static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
+@@ -233,6 +275,7 @@ static void fixup_use_powerup_lock(struct mtd_info *mtd, void *param)
+ }
+ 
+ static struct cfi_fixup cfi_fixup_table[] = {
++	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
+ #endif
+diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
+index 1f64458..205977b 100644
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -185,6 +185,10 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
+ 		extp->TopBottom = 2;
+ 	else
+ 		extp->TopBottom = 3;
++
++	/* burst write mode not supported */
++	cfi->cfiq->BufWriteTimeoutTyp = 0;
++	cfi->cfiq->BufWriteTimeoutMax = 0;
+ }
+ 
+ static void fixup_use_secsi(struct mtd_info *mtd, void *param)
+@@ -217,6 +221,7 @@ static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param)
+ }
+ 
+ static struct cfi_fixup cfi_fixup_table[] = {
++	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef AMD_BOOTLOC_BUG
+ 	{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
+ #endif
+@@ -229,7 +234,6 @@ static struct cfi_fixup cfi_fixup_table[] = {
+ #if !FORCE_WORD_WRITE
+ 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
+ #endif
+-	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ 	{ 0, 0, NULL, NULL }
+ };
+ static struct cfi_fixup jedec_fixup_table[] = {
+diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
+index c0c77f8..7623315 100644
+--- a/drivers/pcmcia/Kconfig
++++ b/drivers/pcmcia/Kconfig
+@@ -271,6 +271,13 @@ config AT91_CF
+ 	  Say Y here to support the CompactFlash controller on AT91 chips.
+ 	  Or choose M to compile the driver as a module named "at91_cf".
+ 
++config AT32_CF
++	tristate "AT32AP CompactFlash Controller"
++	depends on PCMCIA && AVR32 && PLATFORM_AT32AP
++	help
++	  Say Y here to support the CompactFlash controller on AT32 chips.
++	  Or choose M to compile the driver as a module named "at32_cf".
++
+ config PCCARD_NONSTATIC
+ 	tristate
+ 
+diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
+index 4276965..08d7ffa 100644
+--- a/drivers/pcmcia/Makefile
++++ b/drivers/pcmcia/Makefile
+@@ -37,6 +37,7 @@ obj-$(CONFIG_PCMCIA_VRC4171)			+= vrc4171_card.o
+ obj-$(CONFIG_PCMCIA_VRC4173)			+= vrc4173_cardu.o
+ obj-$(CONFIG_OMAP_CF)				+= omap_cf.o
+ obj-$(CONFIG_AT91_CF)				+= at91_cf.o
++obj-$(CONFIG_AT32_CF)				+= at32_cf.o
+ 
+ sa11xx_core-y					+= soc_common.o sa11xx_base.o
+ pxa2xx_core-y					+= soc_common.o pxa2xx_base.o
+diff --git a/drivers/pcmcia/at32_cf.c b/drivers/pcmcia/at32_cf.c
+new file mode 100644
+index 0000000..ebe1495
+--- /dev/null
++++ b/drivers/pcmcia/at32_cf.c
+@@ -0,0 +1,531 @@
++/*
++ * Driver for AVR32 Static Memory Controller: CompactFlash support
++ *
++ * Copyright (C) 2006 Atmel Norway
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++ * 02111-1307, USA.
++ *
++ * The full GNU General Public License is included in this
++ * distribution in the file called COPYING.
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++#include <linux/dma-mapping.h>
++
++#include <pcmcia/ss.h>
++
++#include <asm/gpio.h>
++#include <asm/io.h>
++#include <asm/arch/board.h>
++
++#include <asm/arch/smc.h>
++
++struct at32_cf_socket {
++	struct pcmcia_socket	socket;
++	int			detect_pin;
++	int			reset_pin;
++	int			vcc_pin;
++	int			ready_pin;
++	struct resource		res_attr;
++	struct resource		res_mem;
++	struct resource		res_io;
++	struct smc_config	smc;
++	unsigned int		irq;
++	unsigned int		cf_cs;
++	socket_state_t		state;
++	unsigned		present:1;
++};
++#define to_at32_cf(sock) container_of(sock, struct at32_cf_socket, socket)
++
++/*
++ * We have the following memory layout relative to the base address:
++ *
++ *   Alt IDE Mode:      00e0 0000 -> 00ff ffff
++ *   True IDE Mode:     00c0 0000 -> 00df ffff
++ *   I/O memory:        0080 0000 -> 00bf ffff
++ *   Common memory:     0040 0000 -> 007f ffff
++ *   Attribute memory:  0000 0000 -> 003f ffff
++ */
++#define CF_ATTR_OFFSET	0x00000000
++#define CF_MEM_OFFSET	0x00400000
++#define CF_IO_OFFSET	0x00800000
++#define CF_RES_SIZE	4096
++
++#ifdef DEBUG
++
++static int pc_debug;
++module_param(pc_debug, int, 0644);
++
++static void at32_cf_debug(struct at32_cf_socket *cf, const char *func,
++			  int level, const char *fmt, ...)
++{
++	va_list args;
++
++	if (pc_debug > level) {
++		printk(KERN_DEBUG "at32_cf/%u: %s: ", cf->cf_cs, func);
++		va_start(args, fmt);
++		vprintk(fmt, args);
++		va_end(args);
++	}
++}
++
++#define debug(cf, lvl, fmt, arg...)			\
++	at32_cf_debug(cf, __func__, lvl, fmt, ##arg)
++
++#else
++#define debug(cf, lvl, fmt, arg...) do { } while (0)
++#endif
++
++static inline int at32_cf_present(struct at32_cf_socket *cf)
++{
++	int present = 1;
++
++	/* If we don't have a detect pin, assume the card is present */
++	if (cf->detect_pin >= 0)
++		present = !gpio_get_value(cf->detect_pin);
++
++	return present;
++}
++
++static irqreturn_t at32_cf_irq(int irq, void *dev_id)
++{
++	struct at32_cf_socket *cf = dev_id;
++	unsigned int present;
++
++	present = at32_cf_present(cf);
++	if (present != cf->present) {
++		cf->present = present;
++		debug(cf, 3, "card %s\n", present ? "present" : "gone");
++		pcmcia_parse_events(&cf->socket, SS_DETECT);
++	}
++
++	return IRQ_HANDLED;
++}
++
++static int at32_cf_get_status(struct pcmcia_socket *sock, u_int *value)
++{
++	struct at32_cf_socket *cf;
++	u_int status = 0;
++
++	cf = container_of(sock, struct at32_cf_socket, socket);
++
++	if (at32_cf_present(cf)) {
++		/* NOTE: gpio on AP7xxx is 3.3V */
++		status = SS_DETECT | SS_3VCARD;
++		if (cf->ready_pin < 0 || gpio_get_value(cf->ready_pin))
++			status |= SS_READY;
++		if (cf->vcc_pin < 0 || gpio_get_value(cf->vcc_pin))
++			status |= SS_POWERON;
++	}
++
++	*value = status;
++	return 0;
++}
++
++static int at32_cf_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
++{
++	struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
++
++	debug(cf, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n",
++			(state->csc_mask==0)?"<NONE> ":"",
++			(state->csc_mask&SS_DETECT)?"DETECT ":"",
++			(state->csc_mask&SS_READY)?"READY ":"",
++			(state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
++			(state->csc_mask&SS_BATWARN)?"BATWARN ":"",
++			(state->csc_mask&SS_STSCHG)?"STSCHG ":"",
++			(state->flags==0)?"<NONE> ":"",
++			(state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
++			(state->flags&SS_IOCARD)?"IOCARD ":"",
++			(state->flags&SS_RESET)?"RESET ":"",
++			(state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
++			(state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
++			state->Vcc, state->Vpp, state->io_irq);
++
++	/*
++	 * TODO: Allow boards to override this in case they have level
++	 * converters.
++	 */
++	switch (state->Vcc) {
++	case 0:
++		if (cf->vcc_pin >= 0)
++			gpio_set_value(cf->vcc_pin, 0);
++		break;
++	case 33:
++		if (cf->vcc_pin >= 0)
++			gpio_set_value(cf->vcc_pin, 1);
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	if (cf->reset_pin >= 0)
++		gpio_set_value(cf->reset_pin, state->flags & SS_RESET);
++
++	cf->state = *state;
++
++	return 0;
++}
++
++static int at32_cf_socket_init(struct pcmcia_socket *sock)
++{
++	debug(to_at32_cf(sock), 2, "called\n");
++
++	return 0;
++}
++
++static int at32_cf_suspend(struct pcmcia_socket *sock)
++{
++	debug(to_at32_cf(sock), 2, "called\n");
++
++	at32_cf_set_socket(sock, &dead_socket);
++
++	return 0;
++}
++
++static int at32_cf_set_io_map(struct pcmcia_socket *sock,
++			      struct pccard_io_map *map)
++{
++	struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
++	int retval;
++
++	debug(cf, 2, "map %u  speed %u start 0x%08x stop 0x%08x\n",
++		map->map, map->speed, map->start, map->stop);
++	debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
++		(map->flags == 0) ? "<NONE>":"",
++		(map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
++		(map->flags & MAP_16BIT) ? "16BIT " : "",
++		(map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
++		(map->flags & MAP_0WS) ? "0WS " : "",
++		(map->flags & MAP_WRPROT) ? "WRPROT " : "",
++		(map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
++		(map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
++
++	map->flags &= MAP_ACTIVE | MAP_16BIT | MAP_USE_WAIT;
++
++	if (map->flags & MAP_16BIT)
++		cf->smc.bus_width = 2;
++	else
++		cf->smc.bus_width = 1;
++
++	if (map->flags & MAP_USE_WAIT)
++		cf->smc.nwait_mode = 3;
++	else
++		cf->smc.nwait_mode = 0;
++
++	retval = smc_set_configuration(cf->cf_cs, &cf->smc);
++	if (retval) {
++		printk(KERN_ERR "at32_cf: could not set up SMC for I/O\n");
++		return retval;
++	}
++
++	map->start = cf->socket.io_offset;
++	map->stop = map->start + CF_RES_SIZE - 1;
++
++	return 0;
++}
++
++static int
++at32_cf_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
++{
++	struct at32_cf_socket *cf;
++	struct resource *res;
++	int retval;
++
++	cf = container_of(sock, struct at32_cf_socket, socket);
++
++	debug(cf, 2, "map %u speed %u card_start %08x\n",
++		map->map, map->speed, map->card_start);
++	debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
++		(map->flags==0)?"<NONE>":"",
++		(map->flags&MAP_ACTIVE)?"ACTIVE ":"",
++		(map->flags&MAP_16BIT)?"16BIT ":"",
++		(map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
++		(map->flags&MAP_0WS)?"0WS ":"",
++		(map->flags&MAP_WRPROT)?"WRPROT ":"",
++		(map->flags&MAP_ATTRIB)?"ATTRIB ":"",
++		(map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
++
++	if (map->card_start)
++		return -EINVAL;
++
++	map->flags &= MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT | MAP_USE_WAIT;
++
++	if (map->flags & MAP_ATTRIB) {
++		res = &cf->res_attr;
++
++		/* Linksys WCF12 seems to use WAIT when reading CIS */
++		map->flags |= MAP_USE_WAIT;
++	} else {
++		res = &cf->res_mem;
++	}
++
++	if (map->flags & MAP_USE_WAIT)
++		cf->smc.nwait_mode = 3;
++	else
++		cf->smc.nwait_mode = 0;
++
++	retval = smc_set_configuration(cf->cf_cs, &cf->smc);
++	if (retval) {
++		printk(KERN_ERR "at32_cf: could not set up SMC for mem\n");
++		return retval;
++	}
++
++	map->static_start = res->start;
++
++	return 0;
++}
++
++static struct pccard_operations at32_cf_ops = {
++	.init			= at32_cf_socket_init,
++	.suspend		= at32_cf_suspend,
++	.get_status		= at32_cf_get_status,
++	.set_socket		= at32_cf_set_socket,
++	.set_io_map		= at32_cf_set_io_map,
++	.set_mem_map		= at32_cf_set_mem_map,
++};
++
++static int __init request_pin(struct platform_device *pdev,
++			      unsigned int pin, const char *name)
++{
++	if (gpio_request(pin, name)) {
++		dev_warn(&pdev->dev, "failed to request %s pin\n", name);
++		return -1;
++	}
++
++	return pin;
++}
++
++static struct smc_timing at32_cf_timing __initdata = {
++	.ncs_read_setup		= 30,
++	.nrd_setup		= 100,
++	.ncs_write_setup	= 30,
++	.nwe_setup		= 100,
++
++	.ncs_read_pulse		= 360,
++	.nrd_pulse		= 290,
++	.ncs_write_pulse	= 360,
++	.nwe_pulse		= 290,
++
++	.read_cycle		= 420,
++	.write_cycle		= 420,
++};
++
++static int __init at32_cf_probe(struct platform_device *pdev)
++{
++	struct at32_cf_socket	*cf;
++	struct cf_platform_data	*board = pdev->dev.platform_data;
++	struct resource		*res_skt;
++	int			irq;
++	int			ret;
++
++	dev_dbg(&pdev->dev, "probe");
++
++	if (!board)
++		return -ENXIO;
++
++	res_skt = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res_skt)
++		return -ENXIO;
++
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0)
++		return irq;
++
++	cf = kzalloc(sizeof(struct at32_cf_socket), GFP_KERNEL);
++	if (!cf)
++		return -ENOMEM;
++
++	cf->detect_pin = -1;
++	cf->reset_pin = -1;
++	cf->vcc_pin = -1;
++	cf->ready_pin = -1;
++	cf->cf_cs = board->cs;
++
++	if (board->detect_pin)
++		cf->detect_pin = request_pin(pdev, board->detect_pin,
++					     "cf_detect");
++	if (board->reset_pin)
++		cf->reset_pin = request_pin(pdev, board->reset_pin,
++					    "cf_reset");
++	if (board->vcc_pin)
++		cf->vcc_pin = request_pin(pdev, board->reset_pin,
++					  "cf_vcc");
++	if (board->ready_pin)
++		/* READY is also used for irq through EIM */
++		cf->ready_pin = board->ready_pin;
++
++	debug(cf, 2, "pins: detect=%d reset=%d vcc=%d\n",
++	      cf->detect_pin, cf->reset_pin, cf->vcc_pin);
++
++	cf->socket.pci_irq = irq;
++	cf->socket.ops = &at32_cf_ops;
++	cf->socket.resource_ops = &pccard_static_ops;
++	cf->socket.dev.parent = &pdev->dev;
++	cf->socket.owner = THIS_MODULE;
++	cf->socket.features =
++		SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
++	cf->socket.map_size = CF_RES_SIZE;
++
++	cf->res_attr.start = res_skt->start + CF_ATTR_OFFSET;
++	cf->res_attr.end = cf->res_attr.start + CF_RES_SIZE - 1;
++	cf->res_attr.name = "attribute";
++	cf->res_attr.flags = IORESOURCE_MEM;
++	ret = request_resource(res_skt, &cf->res_attr);
++	if (ret)
++		goto err_request_res_attr;
++
++	cf->res_mem.start = res_skt->start + CF_MEM_OFFSET;
++	cf->res_mem.end = cf->res_mem.start + CF_RES_SIZE - 1;
++	cf->res_mem.name = "memory";
++	cf->res_mem.flags = IORESOURCE_MEM;
++	ret = request_resource(res_skt, &cf->res_mem);
++	if (ret)
++		goto err_request_res_mem;
++
++	cf->res_io.start = res_skt->start + CF_IO_OFFSET;
++	cf->res_io.end = cf->res_io.start + CF_RES_SIZE - 1;
++	cf->res_io.name = "io";
++	cf->res_io.flags = IORESOURCE_MEM;
++	ret = request_resource(res_skt, &cf->res_io);
++	if (ret)
++		goto err_request_res_io;
++
++	cf->socket.io_offset = cf->res_io.start;
++
++	if (cf->detect_pin >= 0) {
++		ret = request_irq(gpio_to_irq(cf->detect_pin), at32_cf_irq,
++				  IRQF_SHARED, "cf_detect", cf);
++		if (ret) {
++			debug(cf, 1,
++			      "failed to request cf_detect interrupt\n");
++			goto err_detect_irq;
++		}
++	}
++
++	/* Setup SMC timings */
++	smc_set_timing(&cf->smc, &at32_cf_timing);
++
++	cf->smc.bus_width = 2;
++	cf->smc.nrd_controlled = 1;
++	cf->smc.nwe_controlled = 1;
++	cf->smc.nwait_mode = 0;
++	cf->smc.byte_write = 0;
++	cf->smc.tdf_cycles = 8;
++	cf->smc.tdf_mode = 0;
++
++	ret = smc_set_configuration(cf->cf_cs, &cf->smc);
++	if (ret) {
++		debug(cf, 1, "failed to configure SMC\n", ret);
++		goto err_smc;
++	}
++
++	ret = pcmcia_register_socket(&cf->socket);
++	if (ret) {
++		debug(cf, 1, "failed to register socket: %d\n", ret);
++		goto err_register_socket;
++	}
++
++	if (cf->reset_pin >= 0)
++		gpio_direction_output(cf->reset_pin, 0);
++
++	platform_set_drvdata(pdev, cf);
++
++	dev_info(&pdev->dev, "Atmel SMC CF interface at 0x%08lx\n",
++		 (unsigned long)res_skt->start);
++
++	return 0;
++
++err_register_socket:
++err_smc:
++	if (cf->detect_pin >= 0)
++		free_irq(gpio_to_irq(cf->detect_pin), cf);
++err_detect_irq:
++	release_resource(&cf->res_io);
++err_request_res_io:
++	release_resource(&cf->res_mem);
++err_request_res_mem:
++	release_resource(&cf->res_attr);
++err_request_res_attr:
++	if (cf->vcc_pin >= 0)
++		gpio_free(cf->vcc_pin);
++	if (cf->reset_pin >= 0)
++		gpio_free(cf->reset_pin);
++	if (cf->detect_pin >= 0)
++		gpio_free(cf->detect_pin);
++	kfree(cf);
++
++	return ret;
++}
++
++static int __exit at32_cf_remove(struct platform_device *pdev)
++{
++	struct at32_cf_socket *cf = platform_get_drvdata(pdev);
++
++	pcmcia_unregister_socket(&cf->socket);
++	if (cf->detect_pin >= 0) {
++		free_irq(gpio_to_irq(cf->detect_pin), cf);
++		gpio_free(cf->detect_pin);
++	}
++	if (cf->vcc_pin >= 0)
++		gpio_free(cf->vcc_pin);
++	if (cf->reset_pin >= 0)
++		gpio_free(cf->reset_pin);
++
++	release_resource(&cf->res_io);
++	release_resource(&cf->res_mem);
++	release_resource(&cf->res_attr);
++	kfree(cf);
++	platform_set_drvdata(pdev, NULL);
++
++	return 0;
++}
++
++static struct platform_driver at32_cf_driver = {
++	.remove		= __exit_p(at32_cf_remove),
++	.driver		= {
++		.name	= "at32_cf",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init at32_cf_init(void)
++{
++	int ret;
++
++	ret = platform_driver_probe(&at32_cf_driver, at32_cf_probe);
++	if (ret)
++		printk(KERN_ERR "at32_cf: probe failed: %d\n", ret);
++	return ret;
++}
++
++static void __exit at32_cf_exit(void)
++{
++	platform_driver_unregister(&at32_cf_driver);
++}
++
++module_init(at32_cf_init);
++module_exit(at32_cf_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Driver for SMC PCMCIA interface");
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
+index d154dee..06a85d7 100644
+--- a/drivers/pcmcia/cistpl.c
++++ b/drivers/pcmcia/cistpl.c
+@@ -25,6 +25,7 @@
+ #include <linux/ioport.h>
+ #include <asm/io.h>
+ #include <asm/byteorder.h>
++#include <asm/unaligned.h>
+ 
+ #include <pcmcia/cs_types.h>
+ #include <pcmcia/ss.h>
+@@ -401,6 +402,15 @@ EXPORT_SYMBOL(pcmcia_replace_cis);
+     
+ ======================================================================*/
+ 
++static inline u16 cis_get_u16(void *ptr)
++{
++	return le16_to_cpu(get_unaligned((__le16 *) ptr));
++}
++static inline u32 cis_get_u32(void *ptr)
++{
++	return le32_to_cpu(get_unaligned((__le32 *) ptr));
++}
++
+ typedef struct tuple_flags {
+     u_int		link_space:4;
+     u_int		has_link:1;
+@@ -461,7 +471,7 @@ static int follow_link(struct pcmcia_socket *s, tuple_t *tuple)
+ 	/* Get indirect link from the MFC tuple */
+ 	read_cis_cache(s, LINK_SPACE(tuple->Flags),
+ 		       tuple->LinkOffset, 5, link);
+-	ofs = le32_to_cpu(*(__le32 *)(link+1));
++	ofs = cis_get_u32(link + 1);
+ 	SPACE(tuple->Flags) = (link[0] == CISTPL_MFC_ATTR);
+ 	/* Move to the next indirect link */
+ 	tuple->LinkOffset += 5;
+@@ -668,10 +678,10 @@ static int parse_checksum(tuple_t *tuple, cistpl_checksum_t *csum)
+     u_char *p;
+     if (tuple->TupleDataLen < 5)
+ 	return CS_BAD_TUPLE;
+-    p = (u_char *)tuple->TupleData;
+-    csum->addr = tuple->CISOffset+(short)le16_to_cpu(*(__le16 *)p)-2;
+-    csum->len = le16_to_cpu(*(__le16 *)(p + 2));
+-    csum->sum = *(p+4);
++    p = (u_char *) tuple->TupleData;
++    csum->addr = tuple->CISOffset + cis_get_u16(p) - 2;
++    csum->len = cis_get_u16(p + 2);
++    csum->sum = *(p + 4);
+     return CS_SUCCESS;
+ }
+ 
+@@ -681,7 +691,7 @@ static int parse_longlink(tuple_t *tuple, cistpl_longlink_t *link)
+ {
+     if (tuple->TupleDataLen < 4)
+ 	return CS_BAD_TUPLE;
+-    link->addr = le32_to_cpu(*(__le32 *)tuple->TupleData);
++    link->addr = cis_get_u32(tuple->TupleData);
+     return CS_SUCCESS;
+ }
+ 
+@@ -700,7 +710,8 @@ static int parse_longlink_mfc(tuple_t *tuple,
+ 	return CS_BAD_TUPLE;
+     for (i = 0; i < link->nfn; i++) {
+ 	link->fn[i].space = *p; p++;
+-	link->fn[i].addr = le32_to_cpu(*(__le32 *)p); p += 4;
++	link->fn[i].addr = cis_get_u32(p);
++	p += 4;
+     }
+     return CS_SUCCESS;
+ }
+@@ -787,12 +798,10 @@ static int parse_jedec(tuple_t *tuple, cistpl_jedec_t *jedec)
+ 
+ static int parse_manfid(tuple_t *tuple, cistpl_manfid_t *m)
+ {
+-    __le16 *p;
+     if (tuple->TupleDataLen < 4)
+ 	return CS_BAD_TUPLE;
+-    p = (__le16 *)tuple->TupleData;
+-    m->manf = le16_to_cpu(p[0]);
+-    m->card = le16_to_cpu(p[1]);
++    m->manf = cis_get_u16(tuple->TupleData);
++    m->card = cis_get_u16(tuple->TupleData + 2);
+     return CS_SUCCESS;
+ }
+ 
+@@ -1091,7 +1100,7 @@ static int parse_cftable_entry(tuple_t *tuple,
+ 	break;
+     case 0x20:
+ 	entry->mem.nwin = 1;
+-	entry->mem.win[0].len = le16_to_cpu(*(__le16 *)p) << 8;
++	entry->mem.win[0].len = cis_get_u16(p) << 8;
+ 	entry->mem.win[0].card_addr = 0;
+ 	entry->mem.win[0].host_addr = 0;
+ 	p += 2;
+@@ -1099,9 +1108,8 @@ static int parse_cftable_entry(tuple_t *tuple,
+ 	break;
+     case 0x40:
+ 	entry->mem.nwin = 1;
+-	entry->mem.win[0].len = le16_to_cpu(*(__le16 *)p) << 8;
+-	entry->mem.win[0].card_addr =
+-	    le16_to_cpu(*(__le16 *)(p+2)) << 8;
++	entry->mem.win[0].len = cis_get_u16(p) << 8;
++	entry->mem.win[0].card_addr = cis_get_u16(p + 2) << 8;
+ 	entry->mem.win[0].host_addr = 0;
+ 	p += 4;
+ 	if (p > q) return CS_BAD_TUPLE;
+@@ -1138,7 +1146,7 @@ static int parse_bar(tuple_t *tuple, cistpl_bar_t *bar)
+     p = (u_char *)tuple->TupleData;
+     bar->attr = *p;
+     p += 2;
+-    bar->size = le32_to_cpu(*(__le32 *)p);
++    bar->size = cis_get_u32(p);
+     return CS_SUCCESS;
+ }
+ 
+@@ -1151,7 +1159,7 @@ static int parse_config_cb(tuple_t *tuple, cistpl_config_t *config)
+ 	return CS_BAD_TUPLE;
+     config->last_idx = *(++p);
+     p++;
+-    config->base = le32_to_cpu(*(__le32 *)p);
++    config->base = cis_get_u32(p);
+     config->subtuples = tuple->TupleDataLen - 6;
+     return CS_SUCCESS;
+ }
+@@ -1267,7 +1275,7 @@ static int parse_vers_2(tuple_t *tuple, cistpl_vers_2_t *v2)
+ 
+     v2->vers = p[0];
+     v2->comply = p[1];
+-    v2->dindex = le16_to_cpu(*(__le16 *)(p+2));
++    v2->dindex = cis_get_u16(p +2 );
+     v2->vspec8 = p[6];
+     v2->vspec9 = p[7];
+     v2->nhdr = p[8];
+@@ -1308,8 +1316,8 @@ static int parse_format(tuple_t *tuple, cistpl_format_t *fmt)
+ 
+     fmt->type = p[0];
+     fmt->edc = p[1];
+-    fmt->offset = le32_to_cpu(*(__le32 *)(p+2));
+-    fmt->length = le32_to_cpu(*(__le32 *)(p+6));
++    fmt->offset = cis_get_u32(p + 2);
++    fmt->length = cis_get_u32(p + 6);
+ 
+     return CS_SUCCESS;
+ }
+diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
+index b046974..bc90604 100644
+--- a/drivers/spi/atmel_spi.c
++++ b/drivers/spi/atmel_spi.c
+@@ -491,8 +491,8 @@ static int atmel_spi_setup(struct spi_device *spi)
+ 		csr |= SPI_BIT(NCPHA);
+ 
+ 	/* TODO: DLYBS and DLYBCT */
+-	csr |= SPI_BF(DLYBS, 10);
+-	csr |= SPI_BF(DLYBCT, 10);
++	csr |= SPI_BF(DLYBS, 0);
++	csr |= SPI_BF(DLYBCT, 0);
+ 
+ 	/* chipselect must have been muxed as GPIO (e.g. in board setup) */
+ 	npcs_pin = (unsigned int)spi->controller_data;
+diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
+index 767aed5..f81d08d 100644
+--- a/drivers/usb/gadget/Kconfig
++++ b/drivers/usb/gadget/Kconfig
+@@ -67,6 +67,17 @@ config USB_GADGET_DEBUG_FILES
+ 	   driver on a new board.   Enable these files by choosing "Y"
+ 	   here.  If in doubt, or to conserve kernel memory, say "N".
+ 
++config USB_GADGET_DEBUG_FS
++	boolean "Debugging information files in debugfs"
++	depends on USB_GADGET && DEBUG_FS
++	help
++	   Some of the drivers in the "gadget" framework can expose
++	   debugging information in files under /sys/kernel/debug/.
++	   The information in these files may help when you're
++	   troubleshooting or bringing up a driver on a new board.
++	   Enable these files by choosing "Y" here.  If in doubt, or
++	   to conserve kernel memory, say "N".
++
+ config	USB_GADGET_SELECTED
+ 	boolean
+ 
+@@ -103,6 +114,20 @@ config USB_AMD5536UDC
+ 	default USB_GADGET
+ 	select USB_GADGET_SELECTED
+ 
++config USB_GADGET_ATMEL_USBA
++	boolean "Atmel USBA"
++	select USB_GADGET_DUALSPEED
++	depends on AVR32
++	help
++	  USBA is the integrated high-speed USB Device controller on
++	  the AT32AP700x processors from Atmel.
++
++config USB_ATMEL_USBA
++	tristate
++	depends on USB_GADGET_ATMEL_USBA
++	default USB_GADGET
++	select USB_GADGET_SELECTED
++
+ config USB_GADGET_FSL_USB2
+ 	boolean "Freescale Highspeed USB DR Peripheral Controller"
+ 	depends on MPC834x || PPC_MPC831x
+@@ -228,7 +253,6 @@ config USB_LH7A40X
+ 	default USB_GADGET
+ 	select USB_GADGET_SELECTED
+ 
+-
+ config USB_GADGET_OMAP
+ 	boolean "OMAP USB Device Controller"
+ 	depends on ARCH_OMAP
+diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
+index 1bc0f03..904e57b 100644
+--- a/drivers/usb/gadget/Makefile
++++ b/drivers/usb/gadget/Makefile
+@@ -14,6 +14,7 @@ obj-$(CONFIG_USB_OMAP)		+= omap_udc.o
+ obj-$(CONFIG_USB_LH7A40X)	+= lh7a40x_udc.o
+ obj-$(CONFIG_USB_S3C2410)	+= s3c2410_udc.o
+ obj-$(CONFIG_USB_AT91)		+= at91_udc.o
++obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
+ obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
+ obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
+ 
+diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
+new file mode 100644
+index 0000000..e35362d
+--- /dev/null
++++ b/drivers/usb/gadget/atmel_usba_udc.c
+@@ -0,0 +1,2038 @@
++/*
++ * Driver for the Atmel USBA high speed USB device controller
++ *
++ * Copyright (C) 2005-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/io.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/list.h>
++#include <linux/platform_device.h>
++#include <linux/usb/ch9.h>
++#include <linux/usb_gadget.h>
++#include <linux/delay.h>
++
++#include <asm/gpio.h>
++#include <asm/arch/board.h>
++
++#include "atmel_usba_udc.h"
++
++
++static struct usba_udc the_udc;
++
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
++#include <linux/debugfs.h>
++#include <linux/uaccess.h>
++
++static int queue_dbg_open(struct inode *inode, struct file *file)
++{
++	struct usba_ep *ep = inode->i_private;
++	struct usba_request *req, *req_copy;
++	struct list_head *queue_data;
++
++	queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL);
++	if (!queue_data)
++		return -ENOMEM;
++	INIT_LIST_HEAD(queue_data);
++
++	spin_lock_irq(&ep->udc->lock);
++	list_for_each_entry(req, &ep->queue, queue) {
++		req_copy = kmalloc(sizeof(*req_copy), GFP_ATOMIC);
++		if (!req_copy)
++			goto fail;
++		memcpy(req_copy, req, sizeof(*req_copy));
++		list_add_tail(&req_copy->queue, queue_data);
++	}
++	spin_unlock_irq(&ep->udc->lock);
++
++	file->private_data = queue_data;
++	return 0;
++
++fail:
++	spin_unlock_irq(&ep->udc->lock);
++	list_for_each_entry_safe(req, req_copy, queue_data, queue) {
++		list_del(&req->queue);
++		kfree(req);
++	}
++	kfree(queue_data);
++	return -ENOMEM;
++}
++
++/*
++ * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0
++ *
++ * b: buffer address
++ * l: buffer length
++ * I/i: interrupt/no interrupt
++ * Z/z: zero/no zero
++ * S/s: short ok/short not ok
++ * s: status
++ * n: nr_packets
++ * F/f: submitted/not submitted to FIFO
++ * D/d: using/not using DMA
++ * L/l: last transaction/not last transaction
++ */
++static ssize_t queue_dbg_read(struct file *file, char __user *buf,
++		size_t nbytes, loff_t *ppos)
++{
++	struct list_head *queue = file->private_data;
++	struct usba_request *req, *tmp_req;
++	size_t len, remaining, actual = 0;
++	char tmpbuf[38];
++
++	if (!access_ok(VERIFY_WRITE, buf, nbytes))
++		return -EFAULT;
++
++	mutex_lock(&file->f_dentry->d_inode->i_mutex);
++	list_for_each_entry_safe(req, tmp_req, queue, queue) {
++		len = snprintf(tmpbuf, sizeof(tmpbuf),
++				"%8p %08x %c%c%c %5d %c%c%c\n",
++				req->req.buf, req->req.length,
++				req->req.no_interrupt ? 'i' : 'I',
++				req->req.zero ? 'Z' : 'z',
++				req->req.short_not_ok ? 's' : 'S',
++				req->req.status,
++				req->submitted ? 'F' : 'f',
++				req->using_dma ? 'D' : 'd',
++				req->last_transaction ? 'L' : 'l');
++		len = min(len, sizeof(tmpbuf));
++		if (len > nbytes)
++			break;
++
++		list_del(&req->queue);
++		kfree(req);
++
++		remaining = __copy_to_user(buf, tmpbuf, len);
++		actual += len - remaining;
++		if (remaining)
++			break;
++
++		nbytes -= len;
++		buf += len;
++	}
++	mutex_unlock(&file->f_dentry->d_inode->i_mutex);
++
++	return actual;
++}
++
++static int queue_dbg_release(struct inode *inode, struct file *file)
++{
++	struct list_head *queue_data = file->private_data;
++	struct usba_request *req, *tmp_req;
++
++	list_for_each_entry_safe(req, tmp_req, queue_data, queue) {
++		list_del(&req->queue);
++		kfree(req);
++	}
++	kfree(queue_data);
++	return 0;
++}
++
++static int regs_dbg_open(struct inode *inode, struct file *file)
++{
++	struct usba_udc *udc;
++	unsigned int i;
++	u32 *data;
++	int ret = -ENOMEM;
++
++	mutex_lock(&inode->i_mutex);
++	udc = inode->i_private;
++	data = kmalloc(inode->i_size, GFP_KERNEL);
++	if (!data)
++		goto out;
++
++	spin_lock_irq(&udc->lock);
++	for (i = 0; i < inode->i_size / 4; i++)
++		data[i] = __raw_readl(udc->regs + i * 4);
++	spin_unlock_irq(&udc->lock);
++
++	file->private_data = data;
++	ret = 0;
++
++out:
++	mutex_unlock(&inode->i_mutex);
++
++	return ret;
++}
++
++static ssize_t regs_dbg_read(struct file *file, char __user *buf,
++		size_t nbytes, loff_t *ppos)
++{
++	struct inode *inode = file->f_dentry->d_inode;
++	int ret;
++
++	mutex_lock(&inode->i_mutex);
++	ret = simple_read_from_buffer(buf, nbytes, ppos,
++			file->private_data,
++			file->f_dentry->d_inode->i_size);
++	mutex_unlock(&inode->i_mutex);
++
++	return ret;
++}
++
++static int regs_dbg_release(struct inode *inode, struct file *file)
++{
++	kfree(file->private_data);
++	return 0;
++}
++
++const struct file_operations queue_dbg_fops = {
++	.owner		= THIS_MODULE,
++	.open		= queue_dbg_open,
++	.llseek		= no_llseek,
++	.read		= queue_dbg_read,
++	.release	= queue_dbg_release,
++};
++
++const struct file_operations regs_dbg_fops = {
++	.owner		= THIS_MODULE,
++	.open		= regs_dbg_open,
++	.llseek		= generic_file_llseek,
++	.read		= regs_dbg_read,
++	.release	= regs_dbg_release,
++};
++
++static void usba_ep_init_debugfs(struct usba_udc *udc,
++		struct usba_ep *ep)
++{
++	struct dentry *ep_root;
++
++	ep_root = debugfs_create_dir(ep->ep.name, udc->debugfs_root);
++	if (!ep_root)
++		goto err_root;
++	ep->debugfs_dir = ep_root;
++
++	ep->debugfs_queue = debugfs_create_file("queue", 0400, ep_root,
++						ep, &queue_dbg_fops);
++	if (!ep->debugfs_queue)
++		goto err_queue;
++
++	if (ep->can_dma) {
++		ep->debugfs_dma_status
++			= debugfs_create_u32("dma_status", 0400, ep_root,
++					&ep->last_dma_status);
++		if (!ep->debugfs_dma_status)
++			goto err_dma_status;
++	}
++	if (ep_is_control(ep)) {
++		ep->debugfs_state
++			= debugfs_create_u32("state", 0400, ep_root,
++					&ep->state);
++		if (!ep->debugfs_state)
++			goto err_state;
++	}
++
++	return;
++
++err_state:
++	if (ep->can_dma)
++		debugfs_remove(ep->debugfs_dma_status);
++err_dma_status:
++	debugfs_remove(ep->debugfs_queue);
++err_queue:
++	debugfs_remove(ep_root);
++err_root:
++	dev_err(&ep->udc->pdev->dev,
++		"failed to create debugfs directory for %s\n", ep->ep.name);
++}
++
++static void usba_ep_cleanup_debugfs(struct usba_ep *ep)
++{
++	debugfs_remove(ep->debugfs_queue);
++	debugfs_remove(ep->debugfs_dma_status);
++	debugfs_remove(ep->debugfs_state);
++	debugfs_remove(ep->debugfs_dir);
++	ep->debugfs_dma_status = NULL;
++	ep->debugfs_dir = NULL;
++}
++
++static void usba_init_debugfs(struct usba_udc *udc)
++{
++	struct dentry *root, *regs;
++	struct resource *regs_resource;
++
++	root = debugfs_create_dir(udc->gadget.name, NULL);
++	if (IS_ERR(root) || !root)
++		goto err_root;
++	udc->debugfs_root = root;
++
++	regs = debugfs_create_file("regs", 0400, root, udc, &regs_dbg_fops);
++	if (!regs)
++		goto err_regs;
++
++	regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM,
++				CTRL_IOMEM_ID);
++	regs->d_inode->i_size = regs_resource->end - regs_resource->start + 1;
++	udc->debugfs_regs = regs;
++
++	usba_ep_init_debugfs(udc, to_usba_ep(udc->gadget.ep0));
++
++	return;
++
++err_regs:
++	debugfs_remove(root);
++err_root:
++	udc->debugfs_root = NULL;
++	dev_err(&udc->pdev->dev, "debugfs is not available\n");
++}
++
++static void usba_cleanup_debugfs(struct usba_udc *udc)
++{
++	usba_ep_cleanup_debugfs(to_usba_ep(udc->gadget.ep0));
++	debugfs_remove(udc->debugfs_regs);
++	debugfs_remove(udc->debugfs_root);
++	udc->debugfs_regs = NULL;
++	udc->debugfs_root = NULL;
++}
++#else
++static inline void usba_ep_init_debugfs(struct usba_udc *udc,
++					 struct usba_ep *ep)
++{
++
++}
++
++static inline void usba_ep_cleanup_debugfs(struct usba_ep *ep)
++{
++
++}
++
++static inline void usba_init_debugfs(struct usba_udc *udc)
++{
++
++}
++
++static inline void usba_cleanup_debugfs(struct usba_udc *udc)
++{
++
++}
++#endif
++
++static int vbus_is_present(struct usba_udc *udc)
++{
++	if (udc->vbus_pin != -1)
++		return gpio_get_value(udc->vbus_pin);
++
++	/* No Vbus detection: Assume always present */
++	return 1;
++}
++
++static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
++{
++	unsigned long tmp;
++
++	DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
++	for (; len > 0; len -= 4, buf += 4, fifo += 4) {
++		tmp = *(unsigned long *)buf;
++		if (len >= 4) {
++			DBG(DBG_FIFO, "  -> %08lx\n", tmp);
++			__raw_writel(tmp, fifo);
++		} else {
++			do {
++				DBG(DBG_FIFO, "  -> %02lx\n", tmp >> 24);
++				__raw_writeb(tmp >> 24, fifo);
++				fifo++;
++				tmp <<= 8;
++			} while (--len);
++			break;
++		}
++	}
++}
++
++static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
++{
++	union {
++		unsigned long *w;
++		unsigned char *b;
++	} p;
++	unsigned long tmp;
++
++	DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
++	for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
++		if (len >= 4) {
++			tmp = __raw_readl(fifo);
++			*p.w = tmp;
++			DBG(DBG_FIFO, "  -> %08lx\n", tmp);
++		} else {
++			do {
++				tmp = __raw_readb(fifo);
++				*p.b = tmp;
++				DBG(DBG_FIFO, " -> %02lx\n", tmp);
++				fifo++, p.b++;
++			} while (--len);
++		}
++	}
++}
++
++static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
++{
++	unsigned int transaction_len;
++
++	transaction_len = req->req.length - req->req.actual;
++	req->last_transaction = 1;
++	if (transaction_len > ep->ep.maxpacket) {
++		transaction_len = ep->ep.maxpacket;
++		req->last_transaction = 0;
++	} else if (transaction_len == ep->ep.maxpacket && req->req.zero)
++		req->last_transaction = 0;
++
++	DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n",
++		ep->ep.name, req, transaction_len,
++		req->last_transaction ? ", done" : "");
++
++	copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
++	usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
++	req->req.actual += transaction_len;
++}
++
++static void submit_request(struct usba_ep *ep, struct usba_request *req)
++{
++	DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n",
++		ep->ep.name, req, req->req.length);
++
++	req->req.actual = 0;
++	req->submitted = 1;
++
++	if (req->using_dma) {
++		if (req->req.length == 0) {
++			usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
++			return;
++		}
++
++		if (req->req.zero)
++			usba_ep_writel(ep, CTL_ENB, USBA_SHORT_PACKET);
++		else
++			usba_ep_writel(ep, CTL_DIS, USBA_SHORT_PACKET);
++
++		usba_dma_writel(ep, ADDRESS, req->req.dma);
++		usba_dma_writel(ep, CONTROL, req->ctrl);
++	} else {
++		next_fifo_transaction(ep, req);
++		if (req->last_transaction) {
++			usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
++			usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
++		} else {
++			usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
++			usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
++		}
++	}
++}
++
++static void submit_next_request(struct usba_ep *ep)
++{
++	struct usba_request *req;
++
++	if (list_empty(&ep->queue)) {
++		usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY | USBA_RX_BK_RDY);
++		return;
++	}
++
++	req = list_entry(ep->queue.next, struct usba_request, queue);
++	if (!req->submitted)
++		submit_request(ep, req);
++}
++
++static void send_status(struct usba_udc *udc, struct usba_ep *ep)
++{
++	ep->state = STATUS_STAGE_IN;
++	usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
++	usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
++}
++
++static void receive_data(struct usba_ep *ep)
++{
++	struct usba_udc *udc = ep->udc;
++	struct usba_request *req;
++	unsigned long status;
++	unsigned int bytecount, nr_busy;
++	int is_complete = 0;
++
++	status = usba_ep_readl(ep, STA);
++	nr_busy = USBA_BFEXT(BUSY_BANKS, status);
++
++	DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy);
++
++	while (nr_busy > 0) {
++		if (list_empty(&ep->queue)) {
++			usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
++			break;
++		}
++		req = list_entry(ep->queue.next,
++				 struct usba_request, queue);
++
++		bytecount = USBA_BFEXT(BYTE_COUNT, status);
++
++		if (status & (1 << 31))
++			is_complete = 1;
++		if (req->req.actual + bytecount >= req->req.length) {
++			is_complete = 1;
++			bytecount = req->req.length - req->req.actual;
++		}
++
++		copy_from_fifo(req->req.buf + req->req.actual,
++				ep->fifo, bytecount);
++		req->req.actual += bytecount;
++
++		usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
++
++		if (is_complete) {
++			DBG(DBG_QUEUE, "%s: request done\n", ep->ep.name);
++			req->req.status = 0;
++			list_del_init(&req->queue);
++			usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
++			spin_unlock(&udc->lock);
++			req->req.complete(&ep->ep, &req->req);
++			spin_lock(&udc->lock);
++		}
++
++		status = usba_ep_readl(ep, STA);
++		nr_busy = USBA_BFEXT(BUSY_BANKS, status);
++
++		if (is_complete && ep_is_control(ep)) {
++			send_status(udc, ep);
++			break;
++		}
++	}
++}
++
++static void
++request_complete(struct usba_ep *ep, struct usba_request *req, int status)
++{
++	struct usba_udc *udc = ep->udc;
++
++	WARN_ON(!list_empty(&req->queue));
++
++	if (req->req.status == -EINPROGRESS)
++		req->req.status = status;
++
++	if (req->mapped) {
++		dma_unmap_single(
++			&udc->pdev->dev, req->req.dma, req->req.length,
++			ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
++		req->req.dma = DMA_ADDR_INVALID;
++		req->mapped = 0;
++	}
++
++	DBG(DBG_GADGET | DBG_REQ,
++		"%s: req %p complete: status %d, actual %u\n",
++		ep->ep.name, req, req->req.status, req->req.actual);
++
++	spin_unlock(&udc->lock);
++	req->req.complete(&ep->ep, &req->req);
++	spin_lock(&udc->lock);
++}
++
++static void
++request_complete_list(struct usba_ep *ep, struct list_head *list, int status)
++{
++	struct usba_request *req, *tmp_req;
++
++	list_for_each_entry_safe(req, tmp_req, list, queue) {
++		list_del_init(&req->queue);
++		request_complete(ep, req, status);
++	}
++}
++
++static int
++usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
++{
++	struct usba_ep *ep = to_usba_ep(_ep);
++	struct usba_udc *udc = ep->udc;
++	unsigned long flags, ept_cfg, maxpacket;
++	unsigned int nr_trans;
++
++	DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc);
++
++	maxpacket = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff;
++
++	if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != ep->index)
++			|| ep->index == 0
++			|| desc->bDescriptorType != USB_DT_ENDPOINT
++			|| maxpacket == 0
++			|| maxpacket > ep->fifo_size) {
++		DBG(DBG_ERR, "ep_enable: Invalid argument");
++		return -EINVAL;
++	}
++
++	ep->is_isoc = 0;
++	ep->is_in = 0;
++
++	if (maxpacket <= 8)
++		ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8);
++	else
++		/* LSB is bit 1, not 0 */
++		ept_cfg = USBA_BF(EPT_SIZE, fls(maxpacket - 1) - 3);
++
++	DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
++			ep->ep.name, ept_cfg, maxpacket);
++
++	if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
++		ep->is_in = 1;
++		ept_cfg |= USBA_EPT_DIR_IN;
++	}
++
++	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
++	case USB_ENDPOINT_XFER_CONTROL:
++		ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL);
++		ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE);
++		break;
++	case USB_ENDPOINT_XFER_ISOC:
++		if (!ep->can_isoc) {
++			DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n",
++					ep->ep.name);
++			return -EINVAL;
++		}
++
++		/*
++		 * Bits 11:12 specify number of _additional_
++		 * transactions per microframe.
++		 */
++		nr_trans = ((le16_to_cpu(desc->wMaxPacketSize) >> 11) & 3) + 1;
++		if (nr_trans > 3)
++			return -EINVAL;
++
++		ep->is_isoc = 1;
++		ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO);
++
++		/*
++		 * Do triple-buffering on high-bandwidth iso endpoints.
++		 */
++		if (nr_trans > 1 && ep->nr_banks == 3)
++			ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_TRIPLE);
++		else
++			ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
++		ept_cfg |= USBA_BF(NB_TRANS, nr_trans);
++		break;
++	case USB_ENDPOINT_XFER_BULK:
++		ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK);
++		ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
++		break;
++	case USB_ENDPOINT_XFER_INT:
++		ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT);
++		ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
++		break;
++	}
++
++	spin_lock_irqsave(&ep->udc->lock, flags);
++
++	if (ep->desc) {
++		spin_unlock_irqrestore(&ep->udc->lock, flags);
++		DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
++		return -EBUSY;
++	}
++
++	ep->desc = desc;
++	ep->ep.maxpacket = maxpacket;
++
++	usba_ep_writel(ep, CFG, ept_cfg);
++	usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
++
++	if (ep->can_dma) {
++		u32 ctrl;
++
++		usba_writel(udc, INT_ENB,
++				(usba_readl(udc, INT_ENB)
++					| USBA_BF(EPT_INT, 1 << ep->index)
++					| USBA_BF(DMA_INT, 1 << ep->index)));
++		ctrl = USBA_AUTO_VALID | USBA_INTDIS_DMA;
++		usba_ep_writel(ep, CTL_ENB, ctrl);
++	} else {
++		usba_writel(udc, INT_ENB,
++				(usba_readl(udc, INT_ENB)
++					| USBA_BF(EPT_INT, 1 << ep->index)));
++	}
++
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index,
++			(unsigned long)usba_ep_readl(ep, CFG));
++	DBG(DBG_HW, "INT_ENB after init: %#08lx\n",
++			(unsigned long)usba_readl(udc, INT_ENB));
++
++	return 0;
++}
++
++static int usba_ep_disable(struct usb_ep *_ep)
++{
++	struct usba_ep *ep = to_usba_ep(_ep);
++	struct usba_udc *udc = ep->udc;
++	LIST_HEAD(req_list);
++	unsigned long flags;
++
++	DBG(DBG_GADGET, "ep_disable: %s\n", ep->ep.name);
++
++	spin_lock_irqsave(&udc->lock, flags);
++
++	if (!ep->desc) {
++		spin_unlock_irqrestore(&udc->lock, flags);
++		DBG(DBG_ERR, "ep_disable: %s not enabled\n", ep->ep.name);
++		return -EINVAL;
++	}
++	ep->desc = NULL;
++
++	list_splice_init(&ep->queue, &req_list);
++	if (ep->can_dma) {
++		usba_dma_writel(ep, CONTROL, 0);
++		usba_dma_writel(ep, ADDRESS, 0);
++		usba_dma_readl(ep, STATUS);
++	}
++	usba_ep_writel(ep, CTL_DIS, USBA_EPT_ENABLE);
++	usba_writel(udc, INT_ENB,
++			usba_readl(udc, INT_ENB)
++			& ~USBA_BF(EPT_INT, 1 << ep->index));
++
++	request_complete_list(ep, &req_list, -ESHUTDOWN);
++
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	return 0;
++}
++
++static struct usb_request *
++usba_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
++{
++	struct usba_request *req;
++
++	DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags);
++
++	req = kzalloc(sizeof(*req), gfp_flags);
++	if (!req)
++		return NULL;
++
++	INIT_LIST_HEAD(&req->queue);
++	req->req.dma = DMA_ADDR_INVALID;
++
++	return &req->req;
++}
++
++static void
++usba_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
++{
++	struct usba_request *req = to_usba_req(_req);
++
++	DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req);
++
++	kfree(req);
++}
++
++static int queue_dma(struct usba_udc *udc, struct usba_ep *ep,
++		struct usba_request *req, gfp_t gfp_flags)
++{
++	unsigned long flags;
++	int ret;
++
++	DBG(DBG_DMA, "%s: req l/%u d/%08x %c%c%c\n",
++		ep->ep.name, req->req.length, req->req.dma,
++		req->req.zero ? 'Z' : 'z',
++		req->req.short_not_ok ? 'S' : 's',
++		req->req.no_interrupt ? 'I' : 'i');
++
++	if (req->req.length > 0x10000) {
++		/* Lengths from 0 to 65536 (inclusive) are supported */
++		DBG(DBG_ERR, "invalid request length %u\n", req->req.length);
++		return -EINVAL;
++	}
++
++	req->using_dma = 1;
++
++	if (req->req.dma == DMA_ADDR_INVALID) {
++		req->req.dma = dma_map_single(
++			&udc->pdev->dev, req->req.buf, req->req.length,
++			ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
++		req->mapped = 1;
++	} else {
++		dma_sync_single_for_device(
++			&udc->pdev->dev, req->req.dma, req->req.length,
++			ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
++		req->mapped = 0;
++	}
++
++	req->ctrl = USBA_BF(DMA_BUF_LEN, req->req.length)
++			| USBA_DMA_CH_EN | USBA_DMA_END_BUF_IE
++			| USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE;
++
++	if (ep->is_in)
++		req->ctrl |= USBA_DMA_END_BUF_EN;
++
++	/*
++	 * Add this request to the queue and submit for DMA if
++	 * possible. Check if we're still alive first -- we may have
++	 * received a reset since last time we checked.
++	 */
++	ret = -ESHUTDOWN;
++	spin_lock_irqsave(&udc->lock, flags);
++	if (ep->desc) {
++		if (list_empty(&ep->queue))
++			submit_request(ep, req);
++
++		list_add_tail(&req->queue, &ep->queue);
++		ret = 0;
++	}
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	return ret;
++}
++
++static int
++usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
++{
++	struct usba_request *req = to_usba_req(_req);
++	struct usba_ep *ep = to_usba_ep(_ep);
++	struct usba_udc *udc = ep->udc;
++	unsigned long flags;
++	int ret;
++
++	DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ, "%s: queue req %p, len %u\n",
++			ep->ep.name, req, _req->length);
++
++	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN || !ep->desc)
++		return -ESHUTDOWN;
++
++	req->submitted = 0;
++	req->using_dma = 0;
++	req->last_transaction = 0;
++
++	_req->status = -EINPROGRESS;
++	_req->actual = 0;
++
++	if (ep->can_dma)
++		return queue_dma(udc, ep, req, gfp_flags);
++
++	/* May have received a reset since last time we checked */
++	ret = -ESHUTDOWN;
++	spin_lock_irqsave(&udc->lock, flags);
++	if (ep->desc) {
++		list_add_tail(&req->queue, &ep->queue);
++
++		if (ep->is_in || (ep_is_control(ep)
++				&& (ep->state == DATA_STAGE_IN
++					|| ep->state == STATUS_STAGE_IN)))
++			usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
++		else
++			usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY);
++		ret = 0;
++	}
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	return ret;
++}
++
++static void
++usba_update_req(struct usba_ep *ep, struct usba_request *req, u32 status)
++{
++	req->req.actual = req->req.length - USBA_BFEXT(DMA_BUF_LEN, status);
++}
++
++static int stop_dma(struct usba_ep *ep, u32 *pstatus)
++{
++	unsigned int timeout;
++	u32 status;
++
++	/*
++	 * Stop the DMA controller. When writing both CH_EN
++	 * and LINK to 0, the other bits are not affected.
++	 */
++	usba_dma_writel(ep, CONTROL, 0);
++
++	/* Wait for the FIFO to empty */
++	for (timeout = 40; timeout; --timeout) {
++		status = usba_dma_readl(ep, STATUS);
++		if (!(status & USBA_DMA_CH_EN))
++			break;
++		udelay(1);
++	}
++
++	if (pstatus)
++		*pstatus = status;
++
++	if (timeout == 0) {
++		dev_err(&ep->udc->pdev->dev,
++			"%s: timed out waiting for DMA FIFO to empty\n",
++			ep->ep.name);
++		return -ETIMEDOUT;
++	}
++
++	return 0;
++}
++
++static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
++{
++	struct usba_ep *ep = to_usba_ep(_ep);
++	struct usba_udc *udc = ep->udc;
++	struct usba_request *req = to_usba_req(_req);
++	unsigned long flags;
++	u32 status;
++
++	DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n",
++			ep->ep.name, req);
++
++	spin_lock_irqsave(&udc->lock, flags);
++
++	if (req->using_dma) {
++		/*
++		 * If this request is currently being transferred,
++		 * stop the DMA controller and reset the FIFO.
++		 */
++		if (ep->queue.next == &req->queue) {
++			status = usba_dma_readl(ep, STATUS);
++			if (status & USBA_DMA_CH_EN)
++				stop_dma(ep, &status);
++
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
++			ep->last_dma_status = status;
++#endif
++
++			usba_writel(udc, EPT_RST, 1 << ep->index);
++
++			usba_update_req(ep, req, status);
++		}
++	}
++
++	/*
++	 * Errors should stop the queue from advancing until the
++	 * completion function returns.
++	 */
++	list_del_init(&req->queue);
++
++	request_complete(ep, req, -ECONNRESET);
++
++	/* Process the next request if any */
++	submit_next_request(ep);
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	return 0;
++}
++
++static int usba_ep_set_halt(struct usb_ep *_ep, int value)
++{
++	struct usba_ep *ep = to_usba_ep(_ep);
++	struct usba_udc *udc = ep->udc;
++	unsigned long flags;
++	int ret = 0;
++
++	DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep->ep.name,
++			value ? "set" : "clear");
++
++	if (!ep->desc) {
++		DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n",
++				ep->ep.name);
++		return -ENODEV;
++	}
++	if (ep->is_isoc) {
++		DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n",
++				ep->ep.name);
++		return -ENOTTY;
++	}
++
++	spin_lock_irqsave(&udc->lock, flags);
++
++	/*
++	 * We can't halt IN endpoints while there are still data to be
++	 * transferred
++	 */
++	if (!list_empty(&ep->queue)
++			|| ((value && ep->is_in && (usba_ep_readl(ep, STA)
++					& USBA_BF(BUSY_BANKS, -1L))))) {
++		ret = -EAGAIN;
++	} else {
++		if (value)
++			usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL);
++		else
++			usba_ep_writel(ep, CLR_STA,
++					USBA_FORCE_STALL | USBA_TOGGLE_CLR);
++		usba_ep_readl(ep, STA);
++	}
++
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	return ret;
++}
++
++static int usba_ep_fifo_status(struct usb_ep *_ep)
++{
++	struct usba_ep *ep = to_usba_ep(_ep);
++
++	return USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
++}
++
++static void usba_ep_fifo_flush(struct usb_ep *_ep)
++{
++	struct usba_ep *ep = to_usba_ep(_ep);
++	struct usba_udc *udc = ep->udc;
++
++	usba_writel(udc, EPT_RST, 1 << ep->index);
++}
++
++static const struct usb_ep_ops usba_ep_ops = {
++	.enable		= usba_ep_enable,
++	.disable	= usba_ep_disable,
++	.alloc_request	= usba_ep_alloc_request,
++	.free_request	= usba_ep_free_request,
++	.queue		= usba_ep_queue,
++	.dequeue	= usba_ep_dequeue,
++	.set_halt	= usba_ep_set_halt,
++	.fifo_status	= usba_ep_fifo_status,
++	.fifo_flush	= usba_ep_fifo_flush,
++};
++
++static int usba_udc_get_frame(struct usb_gadget *gadget)
++{
++	struct usba_udc *udc = to_usba_udc(gadget);
++
++	return USBA_BFEXT(FRAME_NUMBER, usba_readl(udc, FNUM));
++}
++
++static const struct usb_gadget_ops usba_udc_ops = {
++	.get_frame	= usba_udc_get_frame,
++};
++
++#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
++{								\
++	.ep	= {						\
++		.ops		= &usba_ep_ops,			\
++		.name		= nam,				\
++		.maxpacket	= maxpkt,			\
++	},							\
++	.udc		= &the_udc,				\
++	.queue		= LIST_HEAD_INIT(usba_ep[idx].queue),	\
++	.fifo_size	= maxpkt,				\
++	.nr_banks	= maxbk,				\
++	.index		= idx,					\
++	.can_dma	= dma,					\
++	.can_isoc	= isoc,					\
++}
++
++static struct usba_ep usba_ep[] = {
++	EP("ep0", 0, 64, 1, 0, 0),
++	EP("ep1in-bulk", 1, 512, 2, 1, 1),
++	EP("ep2out-bulk", 2, 512, 2, 1, 1),
++	EP("ep3in-int", 3, 64, 3, 1, 0),
++	EP("ep4out-int", 4, 64, 3, 1, 0),
++	EP("ep5in-iso", 5, 1024, 3, 1, 1),
++	EP("ep6out-iso", 6, 1024, 3, 1, 1),
++};
++#undef EP
++
++static struct usb_endpoint_descriptor usba_ep0_desc = {
++	.bLength = USB_DT_ENDPOINT_SIZE,
++	.bDescriptorType = USB_DT_ENDPOINT,
++	.bEndpointAddress = 0,
++	.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
++	.wMaxPacketSize = __constant_cpu_to_le16(64),
++	/* FIXME: I have no idea what to put here */
++	.bInterval = 1,
++};
++
++static void nop_release(struct device *dev)
++{
++
++}
++
++static struct usba_udc the_udc = {
++	.gadget	= {
++		.ops		= &usba_udc_ops,
++		.ep0		= &usba_ep[0].ep,
++		.ep_list	= LIST_HEAD_INIT(the_udc.gadget.ep_list),
++		.is_dualspeed	= 1,
++		.name		= "atmel_usba_udc",
++		.dev	= {
++			.bus_id		= "gadget",
++			.release	= nop_release,
++		},
++	},
++
++	.lock	= SPIN_LOCK_UNLOCKED,
++};
++
++/*
++ * Called with interrupts disabled and udc->lock held.
++ */
++static void reset_all_endpoints(struct usba_udc *udc)
++{
++	struct usba_ep *ep;
++	struct usba_request *req, *tmp_req;
++
++	usba_writel(udc, EPT_RST, ~0UL);
++
++	ep = to_usba_ep(udc->gadget.ep0);
++	list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) {
++		list_del_init(&req->queue);
++		request_complete(ep, req, -ECONNRESET);
++	}
++
++	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
++		if (ep->desc)
++			usba_ep_disable(&ep->ep);
++	}
++}
++
++static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex)
++{
++	struct usba_ep *ep;
++
++	if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
++		return to_usba_ep(udc->gadget.ep0);
++
++	list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
++		u8 bEndpointAddress;
++
++		if (!ep->desc)
++			continue;
++		bEndpointAddress = ep->desc->bEndpointAddress;
++		if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
++			continue;
++		if ((bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
++				== (wIndex & USB_ENDPOINT_NUMBER_MASK))
++			return ep;
++	}
++
++	return NULL;
++}
++
++/* Called with interrupts disabled and udc->lock held */
++static inline void set_protocol_stall(struct usba_udc *udc, struct usba_ep *ep)
++{
++	usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL);
++	ep->state = WAIT_FOR_SETUP;
++}
++
++static inline int is_stalled(struct usba_udc *udc, struct usba_ep *ep)
++{
++	if (usba_ep_readl(ep, STA) & USBA_FORCE_STALL)
++		return 1;
++	return 0;
++}
++
++static inline void set_address(struct usba_udc *udc, unsigned int addr)
++{
++	u32 regval;
++
++	DBG(DBG_BUS, "setting address %u...\n", addr);
++	regval = usba_readl(udc, CTRL);
++	regval = USBA_BFINS(DEV_ADDR, addr, regval);
++	usba_writel(udc, CTRL, regval);
++}
++
++static int do_test_mode(struct usba_udc *udc)
++{
++	static const char test_packet_buffer[] = {
++		/* JKJKJKJK * 9 */
++		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++		/* JJKKJJKK * 8 */
++		0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
++		/* JJKKJJKK * 8 */
++		0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
++		/* JJJJJJJKKKKKKK * 8 */
++		0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
++		0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
++		/* JJJJJJJK * 8 */
++		0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
++		/* {JKKKKKKK * 10}, JK */
++		0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E
++	};
++	struct usba_ep *ep;
++	struct device *dev = &udc->pdev->dev;
++	int test_mode;
++
++	test_mode = udc->test_mode;
++
++	/* Start from a clean slate */
++	reset_all_endpoints(udc);
++
++	switch (test_mode) {
++	case 0x0100:
++		/* Test_J */
++		usba_writel(udc, TST, USBA_TST_J_MODE);
++		dev_info(dev, "Entering Test_J mode...\n");
++		break;
++	case 0x0200:
++		/* Test_K */
++		usba_writel(udc, TST, USBA_TST_K_MODE);
++		dev_info(dev, "Entering Test_K mode...\n");
++		break;
++	case 0x0300:
++		/*
++		 * Test_SE0_NAK: Force high-speed mode and set up ep0
++		 * for Bulk IN transfers
++		 */
++		ep = &usba_ep[0];
++		usba_writel(udc, TST,
++				USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH));
++		usba_ep_writel(ep, CFG,
++				USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
++				| USBA_EPT_DIR_IN
++				| USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
++				| USBA_BF(BK_NUMBER, 1));
++		if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) {
++			set_protocol_stall(udc, ep);
++			dev_err(dev, "Test_SE0_NAK: ep0 not mapped\n");
++		} else {
++			usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
++			dev_info(dev, "Entering Test_SE0_NAK mode...\n");
++		}
++		break;
++	case 0x0400:
++		/* Test_Packet */
++		ep = &usba_ep[0];
++		usba_ep_writel(ep, CFG,
++				USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
++				| USBA_EPT_DIR_IN
++				| USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
++				| USBA_BF(BK_NUMBER, 1));
++		if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) {
++			set_protocol_stall(udc, ep);
++			dev_err(dev, "Test_Packet: ep0 not mapped\n");
++		} else {
++			usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
++			usba_writel(udc, TST, USBA_TST_PKT_MODE);
++			copy_to_fifo(ep->fifo, test_packet_buffer,
++					sizeof(test_packet_buffer));
++			usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
++			dev_info(dev, "Entering Test_Packet mode...\n");
++		}
++		break;
++	default:
++		dev_err(dev, "Invalid test mode: 0x%04x\n", test_mode);
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++/* Avoid overly long expressions */
++static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq)
++{
++	if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
++		return true;
++	return false;
++}
++
++static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq)
++{
++	if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_TEST_MODE))
++		return true;
++	return false;
++}
++
++static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq)
++{
++	if (crq->wValue == __constant_cpu_to_le16(USB_ENDPOINT_HALT))
++		return true;
++	return false;
++}
++
++static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
++		struct usb_ctrlrequest *crq)
++{
++	int retval = 0;;
++
++	switch (crq->bRequest) {
++	case USB_REQ_GET_STATUS: {
++		u16 status;
++
++		if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) {
++			/* Self-powered, no remote wakeup */
++			status = __constant_cpu_to_le16(1 << 0);
++		} else if (crq->bRequestType
++				== (USB_DIR_IN | USB_RECIP_INTERFACE)) {
++			status = __constant_cpu_to_le16(0);
++		} else if (crq->bRequestType
++				== (USB_DIR_IN | USB_RECIP_ENDPOINT)) {
++			struct usba_ep *target;
++
++			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
++			if (!target)
++				goto stall;
++
++			status = 0;
++			if (is_stalled(udc, target))
++				status |= __constant_cpu_to_le16(1);
++		} else
++			goto delegate;
++
++		/* Write directly to the FIFO. No queueing is done. */
++		if (crq->wLength != __constant_cpu_to_le16(sizeof(status)))
++			goto stall;
++		ep->state = DATA_STAGE_IN;
++		__raw_writew(status, ep->fifo);
++		usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
++		break;
++	}
++
++	case USB_REQ_CLEAR_FEATURE: {
++		if (crq->bRequestType == USB_RECIP_DEVICE) {
++			if (feature_is_dev_remote_wakeup(crq)) {
++				/* TODO: Handle REMOTE_WAKEUP */
++			} else {
++				/* Can't CLEAR_FEATURE TEST_MODE */
++				goto stall;
++			}
++		} else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
++			struct usba_ep *target;
++
++			if (crq->wLength != __constant_cpu_to_le16(0)
++					|| !feature_is_ep_halt(crq))
++				goto stall;
++			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
++			if (!target)
++				goto stall;
++
++			usba_ep_writel(target, CLR_STA, USBA_FORCE_STALL);
++			if (target->index != 0)
++				usba_ep_writel(target, CLR_STA,
++						USBA_TOGGLE_CLR);
++		} else {
++			goto delegate;
++		}
++
++		send_status(udc, ep);
++		break;
++	}
++
++	case USB_REQ_SET_FEATURE: {
++		if (crq->bRequestType == USB_RECIP_DEVICE) {
++			if (feature_is_dev_test_mode(crq)) {
++				send_status(udc, ep);
++				ep->state = STATUS_STAGE_TEST;
++				udc->test_mode = le16_to_cpu(crq->wIndex);
++				return 0;
++			} else if (feature_is_dev_remote_wakeup(crq)) {
++				/* TODO: Handle REMOTE_WAKEUP */
++			} else {
++				goto stall;
++			}
++		} else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
++			struct usba_ep *target;
++
++			if (crq->wLength != __constant_cpu_to_le16(0)
++					|| !feature_is_ep_halt(crq))
++				goto stall;
++
++			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
++			if (!target)
++				goto stall;
++
++			usba_ep_writel(target, SET_STA, USBA_FORCE_STALL);
++		} else
++			goto delegate;
++
++		send_status(udc, ep);
++		break;
++	}
++
++	case USB_REQ_SET_ADDRESS:
++		if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
++			goto delegate;
++
++		set_address(udc, le16_to_cpu(crq->wValue));
++		send_status(udc, ep);
++		ep->state = STATUS_STAGE_ADDR;
++		break;
++
++	default:
++delegate:
++		spin_unlock(&udc->lock);
++		retval = udc->driver->setup(&udc->gadget, crq);
++		spin_lock(&udc->lock);
++	}
++
++	return retval;
++
++stall:
++	printk(KERN_ERR
++		"udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, "
++		"halting endpoint...\n",
++		ep->ep.name, crq->bRequestType, crq->bRequest,
++		le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex),
++		le16_to_cpu(crq->wLength));
++	set_protocol_stall(udc, ep);
++	return -1;
++}
++
++static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep)
++{
++	struct usba_request *req;
++	u32 epstatus;
++	u32 epctrl;
++
++restart:
++	epstatus = usba_ep_readl(ep, STA);
++	epctrl = usba_ep_readl(ep, CTL);
++
++	DBG(DBG_INT, "%s [%d]: s/%08x c/%08x\n",
++			ep->ep.name, ep->state, epstatus, epctrl);
++
++	req = NULL;
++	if (!list_empty(&ep->queue))
++		req = list_entry(ep->queue.next,
++				 struct usba_request, queue);
++
++	if ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) {
++		if (req->submitted)
++			next_fifo_transaction(ep, req);
++		else
++			submit_request(ep, req);
++
++		if (req->last_transaction) {
++			usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
++			usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
++		}
++		goto restart;
++	}
++	if ((epstatus & epctrl) & USBA_TX_COMPLETE) {
++		usba_ep_writel(ep, CLR_STA, USBA_TX_COMPLETE);
++
++		switch (ep->state) {
++		case DATA_STAGE_IN:
++			usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY);
++			usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
++			ep->state = STATUS_STAGE_OUT;
++			break;
++		case STATUS_STAGE_ADDR:
++			/* Activate our new address */
++			usba_writel(udc, CTRL, (usba_readl(udc, CTRL)
++						| USBA_FADDR_EN));
++			usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
++			ep->state = WAIT_FOR_SETUP;
++			break;
++		case STATUS_STAGE_IN:
++			if (req) {
++				list_del_init(&req->queue);
++				request_complete(ep, req, 0);
++				submit_next_request(ep);
++			}
++			usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
++			ep->state = WAIT_FOR_SETUP;
++			break;
++		case STATUS_STAGE_TEST:
++			usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
++			ep->state = WAIT_FOR_SETUP;
++			if (do_test_mode(udc))
++				set_protocol_stall(udc, ep);
++			break;
++		default:
++			printk(KERN_ERR
++				"udc: %s: TXCOMP: Invalid endpoint state %d, "
++				"halting endpoint...\n",
++				ep->ep.name, ep->state);
++			set_protocol_stall(udc, ep);
++			break;
++		}
++
++		goto restart;
++	}
++	if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
++		switch (ep->state) {
++		case STATUS_STAGE_OUT:
++			usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
++			usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
++
++			if (req) {
++				list_del_init(&req->queue);
++				request_complete(ep, req, 0);
++			}
++			ep->state = WAIT_FOR_SETUP;
++			break;
++
++		case DATA_STAGE_OUT:
++			receive_data(ep);
++			break;
++
++		default:
++			usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
++			usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
++			printk(KERN_ERR
++				"udc: %s: RXRDY: Invalid endpoint state %d, "
++				"halting endpoint...\n",
++				ep->ep.name, ep->state);
++			set_protocol_stall(udc, ep);
++			break;
++		}
++
++		goto restart;
++	}
++	if (epstatus & USBA_RX_SETUP) {
++		union {
++			struct usb_ctrlrequest crq;
++			unsigned long data[2];
++		} crq;
++		unsigned int pkt_len;
++		int ret;
++
++		if (ep->state != WAIT_FOR_SETUP) {
++			/*
++			 * Didn't expect a SETUP packet at this
++			 * point. Clean up any pending requests (which
++			 * may be successful).
++			 */
++			int status = -EPROTO;
++
++			/*
++			 * RXRDY and TXCOMP are dropped when SETUP
++			 * packets arrive.  Just pretend we received
++			 * the status packet.
++			 */
++			if (ep->state == STATUS_STAGE_OUT
++					|| ep->state == STATUS_STAGE_IN) {
++				usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
++				status = 0;
++			}
++
++			if (req) {
++				list_del_init(&req->queue);
++				request_complete(ep, req, status);
++			}
++		}
++
++		pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
++		DBG(DBG_HW, "Packet length: %u\n", pkt_len);
++		if (pkt_len != sizeof(crq)) {
++			printk(KERN_WARNING "udc: Invalid packet length %u "
++				"(expected %lu)\n", pkt_len, sizeof(crq));
++			set_protocol_stall(udc, ep);
++			return;
++		}
++
++		DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
++		copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
++
++		/* Free up one bank in the FIFO so that we can
++		 * generate or receive a reply right away. */
++		usba_ep_writel(ep, CLR_STA, USBA_RX_SETUP);
++
++		/* printk(KERN_DEBUG "setup: %d: %02x.%02x\n",
++			ep->state, crq.crq.bRequestType,
++			crq.crq.bRequest); */
++
++		if (crq.crq.bRequestType & USB_DIR_IN) {
++			/*
++			 * The USB 2.0 spec states that "if wLength is
++			 * zero, there is no data transfer phase."
++			 * However, testusb #14 seems to actually
++			 * expect a data phase even if wLength = 0...
++			 */
++			ep->state = DATA_STAGE_IN;
++		} else {
++			if (crq.crq.wLength != __constant_cpu_to_le16(0))
++				ep->state = DATA_STAGE_OUT;
++			else
++				ep->state = STATUS_STAGE_IN;
++		}
++
++		ret = -1;
++		if (ep->index == 0)
++			ret = handle_ep0_setup(udc, ep, &crq.crq);
++		else {
++			spin_unlock(&udc->lock);
++			ret = udc->driver->setup(&udc->gadget, &crq.crq);
++			spin_lock(&udc->lock);
++		}
++
++		DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n",
++			crq.crq.bRequestType, crq.crq.bRequest,
++			le16_to_cpu(crq.crq.wLength), ep->state, ret);
++
++		if (ret < 0) {
++			/* Let the host know that we failed */
++			set_protocol_stall(udc, ep);
++		}
++	}
++}
++
++static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep)
++{
++	struct usba_request *req;
++	u32 epstatus;
++	u32 epctrl;
++
++	epstatus = usba_ep_readl(ep, STA);
++	epctrl = usba_ep_readl(ep, CTL);
++
++	DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n", ep->ep.name, epstatus);
++
++	while ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) {
++		DBG(DBG_BUS, "%s: TX PK ready\n", ep->ep.name);
++
++		if (list_empty(&ep->queue)) {
++			dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n");
++			usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
++			return;
++		}
++
++		req = list_entry(ep->queue.next, struct usba_request, queue);
++
++		if (req->using_dma) {
++			/* Send a zero-length packet */
++			usba_ep_writel(ep, SET_STA,
++					USBA_TX_PK_RDY);
++			usba_ep_writel(ep, CTL_DIS,
++					USBA_TX_PK_RDY);
++			list_del_init(&req->queue);
++			submit_next_request(ep);
++			request_complete(ep, req, 0);
++		} else {
++			if (req->submitted)
++				next_fifo_transaction(ep, req);
++			else
++				submit_request(ep, req);
++
++			if (req->last_transaction) {
++				list_del_init(&req->queue);
++				submit_next_request(ep);
++				request_complete(ep, req, 0);
++			}
++		}
++
++		epstatus = usba_ep_readl(ep, STA);
++		epctrl = usba_ep_readl(ep, CTL);
++	}
++	if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
++		DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name);
++		receive_data(ep);
++		usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
++	}
++}
++
++static void usba_dma_irq(struct usba_udc *udc, struct usba_ep *ep)
++{
++	struct usba_request *req;
++	u32 status, control, pending;
++
++	status = usba_dma_readl(ep, STATUS);
++	control = usba_dma_readl(ep, CONTROL);
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
++	ep->last_dma_status = status;
++#endif
++	pending = status & control;
++	DBG(DBG_INT | DBG_DMA, "dma irq, s/%#08x, c/%#08x\n", status, control);
++
++	if (status & USBA_DMA_CH_EN) {
++		dev_err(&udc->pdev->dev,
++			"DMA_CH_EN is set after transfer is finished!\n");
++		dev_err(&udc->pdev->dev,
++			"status=%#08x, pending=%#08x, control=%#08x\n",
++			status, pending, control);
++
++		/*
++		 * try to pretend nothing happened. We might have to
++		 * do something here...
++		 */
++	}
++
++	if (list_empty(&ep->queue))
++		/* Might happen if a reset comes along at the right moment */
++		return;
++
++	if (pending & (USBA_DMA_END_TR_ST | USBA_DMA_END_BUF_ST)) {
++		req = list_entry(ep->queue.next, struct usba_request, queue);
++		usba_update_req(ep, req, status);
++
++		list_del_init(&req->queue);
++		submit_next_request(ep);
++		request_complete(ep, req, 0);
++	}
++}
++
++static irqreturn_t usba_udc_irq(int irq, void *devid)
++{
++	struct usba_udc *udc = devid;
++	u32 status;
++	u32 dma_status;
++	u32 ep_status;
++
++	spin_lock(&udc->lock);
++
++	status = usba_readl(udc, INT_STA);
++	DBG(DBG_INT, "irq, status=%#08x\n", status);
++
++	if (status & USBA_DET_SUSPEND) {
++		usba_writel(udc, INT_CLR, USBA_DET_SUSPEND);
++		DBG(DBG_BUS, "Suspend detected\n");
++		if (udc->gadget.speed != USB_SPEED_UNKNOWN
++				&& udc->driver && udc->driver->suspend) {
++			spin_unlock(&udc->lock);
++			udc->driver->suspend(&udc->gadget);
++			spin_lock(&udc->lock);
++		}
++	}
++
++	if (status & USBA_WAKE_UP) {
++		usba_writel(udc, INT_CLR, USBA_WAKE_UP);
++		DBG(DBG_BUS, "Wake Up CPU detected\n");
++	}
++
++	if (status & USBA_END_OF_RESUME) {
++		usba_writel(udc, INT_CLR, USBA_END_OF_RESUME);
++		DBG(DBG_BUS, "Resume detected\n");
++		if (udc->gadget.speed != USB_SPEED_UNKNOWN
++				&& udc->driver && udc->driver->resume) {
++			spin_unlock(&udc->lock);
++			udc->driver->resume(&udc->gadget);
++			spin_lock(&udc->lock);
++		}
++	}
++
++	dma_status = USBA_BFEXT(DMA_INT, status);
++	if (dma_status) {
++		int i;
++
++		for (i = 1; i < USBA_NR_ENDPOINTS; i++)
++			if (dma_status & (1 << i))
++				usba_dma_irq(udc, &usba_ep[i]);
++	}
++
++	ep_status = USBA_BFEXT(EPT_INT, status);
++	if (ep_status) {
++		int i;
++
++		for (i = 0; i < USBA_NR_ENDPOINTS; i++)
++			if (ep_status & (1 << i)) {
++				if (ep_is_control(&usba_ep[i]))
++					usba_control_irq(udc, &usba_ep[i]);
++				else
++					usba_ep_irq(udc, &usba_ep[i]);
++			}
++	}
++
++	if (status & USBA_END_OF_RESET) {
++		struct usba_ep *ep0;
++
++		usba_writel(udc, INT_CLR, USBA_END_OF_RESET);
++		reset_all_endpoints(udc);
++
++		if (status & USBA_HIGH_SPEED) {
++			DBG(DBG_BUS, "High-speed bus reset detected\n");
++			udc->gadget.speed = USB_SPEED_HIGH;
++		} else {
++			DBG(DBG_BUS, "Full-speed bus reset detected\n");
++			udc->gadget.speed = USB_SPEED_FULL;
++		}
++
++		ep0 = &usba_ep[0];
++		ep0->desc = &usba_ep0_desc;
++		ep0->state = WAIT_FOR_SETUP;
++		usba_ep_writel(ep0, CFG,
++				(USBA_BF(EPT_SIZE, EP0_EPT_SIZE)
++				| USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL)
++				| USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE)));
++		usba_ep_writel(ep0, CTL_ENB,
++				USBA_EPT_ENABLE | USBA_RX_SETUP);
++		usba_writel(udc, INT_ENB,
++				(usba_readl(udc, INT_ENB)
++				| USBA_BF(EPT_INT, 1)
++				| USBA_DET_SUSPEND
++				| USBA_END_OF_RESUME));
++
++		if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED))
++			dev_warn(&udc->pdev->dev,
++				 "WARNING: EP0 configuration is invalid!\n");
++	}
++
++	spin_unlock(&udc->lock);
++
++	return IRQ_HANDLED;
++}
++
++static irqreturn_t usba_vbus_irq(int irq, void *devid)
++{
++	struct usba_udc *udc = devid;
++	int vbus;
++
++	/* debounce */
++	udelay(10);
++
++	spin_lock(&udc->lock);
++
++	/* May happen if Vbus pin toggles during probe() */
++	if (!udc->driver)
++		goto out;
++
++	vbus = gpio_get_value(udc->vbus_pin);
++	if (vbus != udc->vbus_prev) {
++		if (vbus) {
++			usba_writel(udc, CTRL, USBA_EN_USBA);
++			usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
++		} else {
++			udc->gadget.speed = USB_SPEED_UNKNOWN;
++			reset_all_endpoints(udc);
++			usba_writel(udc, CTRL, 0);
++			spin_unlock(&udc->lock);
++			udc->driver->disconnect(&udc->gadget);
++			spin_lock(&udc->lock);
++		}
++		udc->vbus_prev = vbus;
++	}
++
++out:
++	spin_unlock(&udc->lock);
++
++	return IRQ_HANDLED;
++}
++
++int usb_gadget_register_driver(struct usb_gadget_driver *driver)
++{
++	struct usba_udc *udc = &the_udc;
++	unsigned long flags;
++	int ret;
++
++	if (!udc->pdev)
++		return -ENODEV;
++
++	spin_lock_irqsave(&udc->lock, flags);
++	if (udc->driver) {
++		spin_unlock_irqrestore(&udc->lock, flags);
++		return -EBUSY;
++	}
++
++	udc->driver = driver;
++	udc->gadget.dev.driver = &driver->driver;
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	clk_enable(udc->pclk);
++	clk_enable(udc->hclk);
++
++	ret = driver->bind(&udc->gadget);
++	if (ret) {
++		DBG(DBG_ERR, "Could not bind to driver %s: error %d\n",
++			driver->driver.name, ret);
++		goto err_driver_bind;
++	}
++
++	DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name);
++
++	udc->vbus_prev = 0;
++	if (udc->vbus_pin != -1)
++		enable_irq(gpio_to_irq(udc->vbus_pin));
++
++	/* If Vbus is present, enable the controller and wait for reset */
++	spin_lock_irqsave(&udc->lock, flags);
++	if (vbus_is_present(udc) && udc->vbus_prev == 0) {
++		usba_writel(udc, CTRL, USBA_EN_USBA);
++		usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
++	}
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	return 0;
++
++err_driver_bind:
++	udc->driver = NULL;
++	udc->gadget.dev.driver = NULL;
++	return ret;
++}
++EXPORT_SYMBOL(usb_gadget_register_driver);
++
++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
++{
++	struct usba_udc *udc = &the_udc;
++	unsigned long flags;
++
++	if (!udc->pdev)
++		return -ENODEV;
++	if (driver != udc->driver)
++		return -EINVAL;
++
++	if (udc->vbus_pin != -1)
++		disable_irq(gpio_to_irq(udc->vbus_pin));
++
++	spin_lock_irqsave(&udc->lock, flags);
++	udc->gadget.speed = USB_SPEED_UNKNOWN;
++	reset_all_endpoints(udc);
++	spin_unlock_irqrestore(&udc->lock, flags);
++
++	/* This will also disable the DP pullup */
++	usba_writel(udc, CTRL, 0);
++
++	driver->unbind(&udc->gadget);
++	udc->gadget.dev.driver = NULL;
++	udc->driver = NULL;
++
++	clk_disable(udc->hclk);
++	clk_disable(udc->pclk);
++
++	DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name);
++
++	return 0;
++}
++EXPORT_SYMBOL(usb_gadget_unregister_driver);
++
++static int __init usba_udc_probe(struct platform_device *pdev)
++{
++	struct usba_platform_data *pdata = pdev->dev.platform_data;
++	struct resource *regs, *fifo;
++	struct clk *pclk, *hclk;
++	struct usba_udc *udc = &the_udc;
++	int irq, ret, i;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
++	fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
++	if (!regs || !fifo)
++		return -ENXIO;
++
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0)
++		return irq;
++
++	pclk = clk_get(&pdev->dev, "pclk");
++	if (IS_ERR(pclk))
++		return PTR_ERR(pclk);
++	hclk = clk_get(&pdev->dev, "hclk");
++	if (IS_ERR(hclk)) {
++		ret = PTR_ERR(hclk);
++		goto err_get_hclk;
++	}
++
++	udc->pdev = pdev;
++	udc->pclk = pclk;
++	udc->hclk = hclk;
++	udc->vbus_pin = -1;
++
++	ret = -ENOMEM;
++	udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!udc->regs) {
++		dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
++		goto err_map_regs;
++	}
++	dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
++		 (unsigned long)regs->start, udc->regs);
++	udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1);
++	if (!udc->fifo) {
++		dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
++		goto err_map_fifo;
++	}
++	dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
++		 (unsigned long)fifo->start, udc->fifo);
++
++	device_initialize(&udc->gadget.dev);
++	udc->gadget.dev.parent = &pdev->dev;
++	udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
++
++	platform_set_drvdata(pdev, udc);
++
++	/* Make sure we start from a clean slate */
++	clk_enable(pclk);
++	usba_writel(udc, CTRL, 0);
++	clk_disable(pclk);
++
++	INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
++	usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
++	usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
++	usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
++	for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
++		struct usba_ep *ep = &usba_ep[i];
++
++		ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
++		ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
++		ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
++
++		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
++	}
++
++	ret = request_irq(irq, usba_udc_irq, 0, "atmel_usba_udc", udc);
++	if (ret) {
++		dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n",
++			irq, ret);
++		goto err_request_irq;
++	}
++	udc->irq = irq;
++
++	ret = device_add(&udc->gadget.dev);
++	if (ret) {
++		dev_dbg(&pdev->dev, "Could not add gadget: %d\n", ret);
++		goto err_device_add;
++	}
++
++	if (pdata && pdata->vbus_pin != GPIO_PIN_NONE) {
++		if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
++			udc->vbus_pin = pdata->vbus_pin;
++
++			ret = request_irq(gpio_to_irq(udc->vbus_pin),
++					usba_vbus_irq, 0,
++					"atmel_usba_udc", udc);
++			if (ret) {
++				gpio_free(udc->vbus_pin);
++				udc->vbus_pin = -1;
++				dev_warn(&udc->pdev->dev,
++					 "failed to request vbus irq; "
++					 "assuming always on\n");
++			} else {
++				disable_irq(gpio_to_irq(udc->vbus_pin));
++			}
++		}
++	}
++
++	usba_init_debugfs(udc);
++	for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
++		usba_ep_init_debugfs(udc, &usba_ep[i]);
++
++	return 0;
++
++err_device_add:
++	free_irq(irq, udc);
++err_request_irq:
++	iounmap(udc->fifo);
++err_map_fifo:
++	iounmap(udc->regs);
++err_map_regs:
++	clk_put(hclk);
++err_get_hclk:
++	clk_put(pclk);
++
++	platform_set_drvdata(pdev, NULL);
++
++	return ret;
++}
++
++static int __exit usba_udc_remove(struct platform_device *pdev)
++{
++	struct usba_udc *udc;
++	int i;
++
++	udc = platform_get_drvdata(pdev);
++
++	for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
++		usba_ep_cleanup_debugfs(&usba_ep[i]);
++	usba_cleanup_debugfs(udc);
++
++	if (udc->vbus_pin != -1)
++		gpio_free(udc->vbus_pin);
++
++	free_irq(udc->irq, udc);
++	iounmap(udc->fifo);
++	iounmap(udc->regs);
++	clk_put(udc->hclk);
++	clk_put(udc->pclk);
++
++	device_unregister(&udc->gadget.dev);
++
++	return 0;
++}
++
++static struct platform_driver udc_driver = {
++	.remove		= __exit_p(usba_udc_remove),
++	.driver		= {
++		.name		= "atmel_usba_udc",
++	},
++};
++
++static int __init udc_init(void)
++{
++	return platform_driver_probe(&udc_driver, usba_udc_probe);
++}
++module_init(udc_init);
++
++static void __exit udc_exit(void)
++{
++	platform_driver_unregister(&udc_driver);
++}
++module_exit(udc_exit);
++
++MODULE_DESCRIPTION("Atmel USBA UDC driver");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
+new file mode 100644
+index 0000000..f4f0f8b
+--- /dev/null
++++ b/drivers/usb/gadget/atmel_usba_udc.h
+@@ -0,0 +1,350 @@
++/*
++ * Driver for the Atmel USBA high speed USB device controller
++ *
++ * Copyright (C) 2005-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __LINUX_USB_GADGET_USBA_UDC_H__
++#define __LINUX_USB_GADGET_USBA_UDC_H__
++
++/* USB register offsets */
++#define USBA_CTRL				0x0000
++#define USBA_FNUM				0x0004
++#define USBA_INT_ENB				0x0010
++#define USBA_INT_STA				0x0014
++#define USBA_INT_CLR				0x0018
++#define USBA_EPT_RST				0x001c
++#define USBA_TST				0x00e0
++
++/* USB endpoint register offsets */
++#define USBA_EPT_CFG				0x0000
++#define USBA_EPT_CTL_ENB			0x0004
++#define USBA_EPT_CTL_DIS			0x0008
++#define USBA_EPT_CTL				0x000c
++#define USBA_EPT_SET_STA			0x0014
++#define USBA_EPT_CLR_STA			0x0018
++#define USBA_EPT_STA				0x001c
++
++/* USB DMA register offsets */
++#define USBA_DMA_NXT_DSC			0x0000
++#define USBA_DMA_ADDRESS			0x0004
++#define USBA_DMA_CONTROL			0x0008
++#define USBA_DMA_STATUS				0x000c
++
++/* Bitfields in CTRL */
++#define USBA_DEV_ADDR_OFFSET			0
++#define USBA_DEV_ADDR_SIZE			7
++#define USBA_FADDR_EN				(1 <<  7)
++#define USBA_EN_USBA				(1 <<  8)
++#define USBA_DETACH				(1 <<  9)
++#define USBA_REMOTE_WAKE_UP			(1 << 10)
++
++/* Bitfields in FNUM */
++#define USBA_MICRO_FRAME_NUM_OFFSET		0
++#define USBA_MICRO_FRAME_NUM_SIZE		3
++#define USBA_FRAME_NUMBER_OFFSET		3
++#define USBA_FRAME_NUMBER_SIZE			11
++#define USBA_FRAME_NUM_ERROR			(1 << 31)
++
++/* Bitfields in INT_ENB/INT_STA/INT_CLR */
++#define USBA_HIGH_SPEED				(1 <<  0)
++#define USBA_DET_SUSPEND			(1 <<  1)
++#define USBA_MICRO_SOF				(1 <<  2)
++#define USBA_SOF				(1 <<  3)
++#define USBA_END_OF_RESET			(1 <<  4)
++#define USBA_WAKE_UP				(1 <<  5)
++#define USBA_END_OF_RESUME			(1 <<  6)
++#define USBA_UPSTREAM_RESUME			(1 <<  7)
++#define USBA_EPT_INT_OFFSET			8
++#define USBA_EPT_INT_SIZE			16
++#define USBA_DMA_INT_OFFSET			24
++#define USBA_DMA_INT_SIZE			8
++
++/* Bitfields in EPT_RST */
++#define USBA_RST_OFFSET				0
++#define USBA_RST_SIZE				16
++
++/* Bitfields in USBA_TST */
++#define USBA_SPEED_CFG_OFFSET			0
++#define USBA_SPEED_CFG_SIZE			2
++#define USBA_TST_J_MODE				(1 <<  2)
++#define USBA_TST_K_MODE				(1 <<  3)
++#define USBA_TST_PKT_MODE			(1 <<  4)
++#define USBA_OPMODE2				(1 <<  5)
++
++/* Bitfields in EPT_CFG */
++#define USBA_EPT_SIZE_OFFSET			0
++#define USBA_EPT_SIZE_SIZE			3
++#define USBA_EPT_DIR_IN				(1 <<  3)
++#define USBA_EPT_TYPE_OFFSET			4
++#define USBA_EPT_TYPE_SIZE			2
++#define USBA_BK_NUMBER_OFFSET			6
++#define USBA_BK_NUMBER_SIZE			2
++#define USBA_NB_TRANS_OFFSET			8
++#define USBA_NB_TRANS_SIZE			2
++#define USBA_EPT_MAPPED				(1 << 31)
++
++/* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
++#define USBA_EPT_ENABLE				(1 <<  0)
++#define USBA_AUTO_VALID				(1 <<  1)
++#define USBA_INTDIS_DMA				(1 <<  3)
++#define USBA_NYET_DIS				(1 <<  4)
++#define USBA_DATAX_RX				(1 <<  6)
++#define USBA_MDATA_RX				(1 <<  7)
++/* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
++#define USBA_BUSY_BANK_IE			(1 << 18)
++
++/* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
++#define USBA_FORCE_STALL			(1 <<  5)
++#define USBA_TOGGLE_CLR				(1 <<  6)
++#define USBA_TOGGLE_SEQ_OFFSET			6
++#define USBA_TOGGLE_SEQ_SIZE			2
++#define USBA_ERR_OVFLW				(1 <<  8)
++#define USBA_RX_BK_RDY				(1 <<  9)
++#define USBA_KILL_BANK				(1 <<  9)
++#define USBA_TX_COMPLETE			(1 << 10)
++#define USBA_TX_PK_RDY				(1 << 11)
++#define USBA_ISO_ERR_TRANS			(1 << 11)
++#define USBA_RX_SETUP				(1 << 12)
++#define USBA_ISO_ERR_FLOW			(1 << 12)
++#define USBA_STALL_SENT				(1 << 13)
++#define USBA_ISO_ERR_CRC			(1 << 13)
++#define USBA_ISO_ERR_NBTRANS			(1 << 13)
++#define USBA_NAK_IN				(1 << 14)
++#define USBA_ISO_ERR_FLUSH			(1 << 14)
++#define USBA_NAK_OUT				(1 << 15)
++#define USBA_CURRENT_BANK_OFFSET		16
++#define USBA_CURRENT_BANK_SIZE			2
++#define USBA_BUSY_BANKS_OFFSET			18
++#define USBA_BUSY_BANKS_SIZE			2
++#define USBA_BYTE_COUNT_OFFSET			20
++#define USBA_BYTE_COUNT_SIZE			11
++#define USBA_SHORT_PACKET			(1 << 31)
++
++/* Bitfields in DMA_CONTROL */
++#define USBA_DMA_CH_EN				(1 <<  0)
++#define USBA_DMA_LINK				(1 <<  1)
++#define USBA_DMA_END_TR_EN			(1 <<  2)
++#define USBA_DMA_END_BUF_EN			(1 <<  3)
++#define USBA_DMA_END_TR_IE			(1 <<  4)
++#define USBA_DMA_END_BUF_IE			(1 <<  5)
++#define USBA_DMA_DESC_LOAD_IE			(1 <<  6)
++#define USBA_DMA_BURST_LOCK			(1 <<  7)
++#define USBA_DMA_BUF_LEN_OFFSET			16
++#define USBA_DMA_BUF_LEN_SIZE			16
++
++/* Bitfields in DMA_STATUS */
++#define USBA_DMA_CH_ACTIVE			(1 <<  1)
++#define USBA_DMA_END_TR_ST			(1 <<  4)
++#define USBA_DMA_END_BUF_ST			(1 <<  5)
++#define USBA_DMA_DESC_LOAD_ST			(1 <<  6)
++
++/* Constants for SPEED_CFG */
++#define USBA_SPEED_CFG_NORMAL			0
++#define USBA_SPEED_CFG_FORCE_HIGH		2
++#define USBA_SPEED_CFG_FORCE_FULL		3
++
++/* Constants for EPT_SIZE */
++#define USBA_EPT_SIZE_8				0
++#define USBA_EPT_SIZE_16			1
++#define USBA_EPT_SIZE_32			2
++#define USBA_EPT_SIZE_64			3
++#define USBA_EPT_SIZE_128			4
++#define USBA_EPT_SIZE_256			5
++#define USBA_EPT_SIZE_512			6
++#define USBA_EPT_SIZE_1024			7
++
++/* Constants for EPT_TYPE */
++#define USBA_EPT_TYPE_CONTROL			0
++#define USBA_EPT_TYPE_ISO			1
++#define USBA_EPT_TYPE_BULK			2
++#define USBA_EPT_TYPE_INT			3
++
++/* Constants for BK_NUMBER */
++#define USBA_BK_NUMBER_ZERO			0
++#define USBA_BK_NUMBER_ONE			1
++#define USBA_BK_NUMBER_DOUBLE			2
++#define USBA_BK_NUMBER_TRIPLE			3
++
++/* Bit manipulation macros */
++#define USBA_BF(name, value)					\
++	(((value) & ((1 << USBA_##name##_SIZE) - 1))		\
++	 << USBA_##name##_OFFSET)
++#define USBA_BFEXT(name, value)					\
++	(((value) >> USBA_##name##_OFFSET)			\
++	 & ((1 << USBA_##name##_SIZE) - 1))
++#define USBA_BFINS(name, value, old)				\
++	(((old) & ~(((1 << USBA_##name##_SIZE) - 1)		\
++		    << USBA_##name##_OFFSET))			\
++	 | USBA_BF(name, value))
++
++/* Register access macros */
++#define usba_readl(udc, reg)					\
++	__raw_readl((udc)->regs + USBA_##reg)
++#define usba_writel(udc, reg, value)				\
++	__raw_writel((value), (udc)->regs + USBA_##reg)
++#define usba_ep_readl(ep, reg)					\
++	__raw_readl((ep)->ep_regs + USBA_EPT_##reg)
++#define usba_ep_writel(ep, reg, value)				\
++	__raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg)
++#define usba_dma_readl(ep, reg)					\
++	__raw_readl((ep)->dma_regs + USBA_DMA_##reg)
++#define usba_dma_writel(ep, reg, value)				\
++	__raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg)
++
++/* Calculate base address for a given endpoint or DMA controller */
++#define USBA_EPT_BASE(x)	(0x100 + (x) * 0x20)
++#define USBA_DMA_BASE(x)	(0x300 + (x) * 0x10)
++#define USBA_FIFO_BASE(x)	((x) << 16)
++
++/* Synth parameters */
++#define USBA_NR_ENDPOINTS	7
++
++#define EP0_FIFO_SIZE		64
++#define EP0_EPT_SIZE		USBA_EPT_SIZE_64
++#define EP0_NR_BANKS		1
++
++/*
++ * REVISIT: Try to eliminate this value. Can we rely on req->mapped to
++ * provide this information?
++ */
++#define DMA_ADDR_INVALID (~(dma_addr_t)0)
++
++#define FIFO_IOMEM_ID	0
++#define CTRL_IOMEM_ID	1
++
++#ifdef DEBUG
++#define DBG_ERR		0x0001	/* report all error returns */
++#define DBG_HW		0x0002	/* debug hardware initialization */
++#define DBG_GADGET	0x0004	/* calls to/from gadget driver */
++#define DBG_INT		0x0008	/* interrupts */
++#define DBG_BUS		0x0010	/* report changes in bus state */
++#define DBG_QUEUE	0x0020  /* debug request queue processing */
++#define DBG_FIFO	0x0040  /* debug FIFO contents */
++#define DBG_DMA		0x0080  /* debug DMA handling */
++#define DBG_REQ		0x0100	/* print out queued request length */
++#define DBG_ALL		0xffff
++#define DBG_NONE	0x0000
++
++#define DEBUG_LEVEL	(DBG_ERR)
++#define DBG(level, fmt, ...)					\
++	do {							\
++		if ((level) & DEBUG_LEVEL)			\
++			printk(KERN_DEBUG "udc: " fmt, ## __VA_ARGS__);	\
++	} while (0)
++#else
++#define DBG(level, fmt...)
++#endif
++
++enum usba_ctrl_state {
++	WAIT_FOR_SETUP,
++	DATA_STAGE_IN,
++	DATA_STAGE_OUT,
++	STATUS_STAGE_IN,
++	STATUS_STAGE_OUT,
++	STATUS_STAGE_ADDR,
++	STATUS_STAGE_TEST,
++};
++/*
++  EP_STATE_IDLE,
++  EP_STATE_SETUP,
++  EP_STATE_IN_DATA,
++  EP_STATE_OUT_DATA,
++  EP_STATE_SET_ADDR_STATUS,
++  EP_STATE_RX_STATUS,
++  EP_STATE_TX_STATUS,
++  EP_STATE_HALT,
++*/
++
++struct usba_dma_desc {
++	dma_addr_t next;
++	dma_addr_t addr;
++	u32 ctrl;
++};
++
++struct usba_ep {
++	int					state;
++	void __iomem				*ep_regs;
++	void __iomem				*dma_regs;
++	void __iomem				*fifo;
++	struct usb_ep				ep;
++	struct usba_udc				*udc;
++
++	struct list_head			queue;
++	const struct usb_endpoint_descriptor	*desc;
++
++	u16					fifo_size;
++	u8					nr_banks;
++	u8					index;
++	unsigned int				can_dma:1;
++	unsigned int				can_isoc:1;
++	unsigned int				is_isoc:1;
++	unsigned int				is_in:1;
++
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
++	u32					last_dma_status;
++	struct dentry				*debugfs_dir;
++	struct dentry				*debugfs_queue;
++	struct dentry				*debugfs_dma_status;
++	struct dentry				*debugfs_state;
++#endif
++};
++
++struct usba_request {
++	struct usb_request			req;
++	struct list_head			queue;
++
++	u32					ctrl;
++
++	unsigned int				submitted:1;
++	unsigned int				last_transaction:1;
++	unsigned int				using_dma:1;
++	unsigned int				mapped:1;
++};
++
++struct usba_udc {
++	/* Protect hw registers from concurrent modifications */
++	spinlock_t lock;
++
++	void __iomem *regs;
++	void __iomem *fifo;
++
++	struct usb_gadget gadget;
++	struct usb_gadget_driver *driver;
++	struct platform_device *pdev;
++	int irq;
++	int vbus_pin;
++	struct clk *pclk;
++	struct clk *hclk;
++
++	int test_mode;
++	int vbus_prev;
++
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
++	struct dentry *debugfs_root;
++	struct dentry *debugfs_regs;
++#endif
++};
++
++static inline struct usba_ep *to_usba_ep(struct usb_ep *ep)
++{
++	return container_of(ep, struct usba_ep, ep);
++}
++
++static inline struct usba_request *to_usba_req(struct usb_request *req)
++{
++	return container_of(req, struct usba_request, req);
++}
++
++static inline struct usba_udc *to_usba_udc(struct usb_gadget *gadget)
++{
++	return container_of(gadget, struct usba_udc, gadget);
++}
++
++#define ep_is_control(ep)	((ep)->index == 0)
++#define ep_is_idle(ep)		((ep)->state == EP_STATE_IDLE)
++
++#endif /* __LINUX_USB_GADGET_USBA_UDC_H */
+diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
+index 235b618..bb361ab 100644
+--- a/drivers/video/atmel_lcdfb.c
++++ b/drivers/video/atmel_lcdfb.c
+@@ -37,7 +37,9 @@
+ #endif
+ 
+ #if defined(CONFIG_ARCH_AT91)
+-#define	ATMEL_LCDFB_FBINFO_DEFAULT	FBINFO_DEFAULT
++#define	ATMEL_LCDFB_FBINFO_DEFAULT	(FBINFO_DEFAULT \
++					 | FBINFO_PARTIAL_PAN_OK \
++					 | FBINFO_HWACCEL_YPAN)
+ 
+ static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
+ 					struct fb_var_screeninfo *var)
+@@ -74,7 +76,7 @@ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
+ 	.type		= FB_TYPE_PACKED_PIXELS,
+ 	.visual		= FB_VISUAL_TRUECOLOR,
+ 	.xpanstep	= 0,
+-	.ypanstep	= 0,
++	.ypanstep	= 1,
+ 	.ywrapstep	= 0,
+ 	.accel		= FB_ACCEL_NONE,
+ };
+diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
+index 2580f5f..b6f936a 100644
+--- a/drivers/video/backlight/Kconfig
++++ b/drivers/video/backlight/Kconfig
+@@ -24,6 +24,18 @@ config LCD_CLASS_DEVICE
+ 	  To have support for your specific LCD panel you will have to
+ 	  select the proper drivers which depend on this option.
+ 
++config LCD_LTV350QV
++	tristate "Samsung LTV350QV LCD Panel"
++	depends on LCD_CLASS_DEVICE && SPI_MASTER
++	default n
++	help
++	  If you have a Samsung LTV350QV LCD panel, say y to include a
++	  power control driver for it.  The panel starts up in power
++	  off state, so you need this driver in order to see any
++	  output.
++
++	  The LTV350QV panel is present on all ATSTK1000 boards.
++
+ #
+ # Backlight
+ #
+diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
+index c6e2266..965a78b 100644
+--- a/drivers/video/backlight/Makefile
++++ b/drivers/video/backlight/Makefile
+@@ -1,6 +1,8 @@
+ # Backlight & LCD drivers
+ 
+ obj-$(CONFIG_LCD_CLASS_DEVICE)     += lcd.o
++obj-$(CONFIG_LCD_LTV350QV)	+= ltv350qv.o
++
+ obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
+ obj-$(CONFIG_BACKLIGHT_CORGI)	+= corgi_bl.o
+ obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
+diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c
+new file mode 100644
+index 0000000..751dc53
+--- /dev/null
++++ b/drivers/video/backlight/ltv350qv.c
+@@ -0,0 +1,339 @@
++/*
++ * Power control for Samsung LTV350QV Quarter VGA LCD Panel
++ *
++ * Copyright (C) 2006, 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/lcd.h>
++#include <linux/module.h>
++#include <linux/spi/spi.h>
++
++#include "ltv350qv.h"
++
++#define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
++
++struct ltv350qv {
++	struct spi_device	*spi;
++	u8			*buffer;
++	int			power;
++	struct lcd_device	*ld;
++};
++
++/*
++ * The power-on and power-off sequences are taken from the
++ * LTV350QV-F04 data sheet from Samsung. The register definitions are
++ * taken from the S6F2002 command list also from Samsung. Both
++ * documents are distributed with the AVR32 Linux BSP CD from Atmel.
++ *
++ * There's still some voodoo going on here, but it's a lot better than
++ * in the first incarnation of the driver where all we had was the raw
++ * numbers from the initialization sequence.
++ */
++static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val)
++{
++	struct spi_message msg;
++	struct spi_transfer index_xfer = {
++		.len		= 3,
++		.cs_change	= 1,
++	};
++	struct spi_transfer value_xfer = {
++		.len		= 3,
++	};
++
++	spi_message_init(&msg);
++
++	/* register index */
++	lcd->buffer[0] = LTV_OPC_INDEX;
++	lcd->buffer[1] = 0x00;
++	lcd->buffer[2] = reg & 0x7f;
++	index_xfer.tx_buf = lcd->buffer;
++	spi_message_add_tail(&index_xfer, &msg);
++
++	/* register value */
++	lcd->buffer[4] = LTV_OPC_DATA;
++	lcd->buffer[5] = val >> 8;
++	lcd->buffer[6] = val;
++	value_xfer.tx_buf = lcd->buffer + 4;
++	spi_message_add_tail(&value_xfer, &msg);
++
++	return spi_sync(lcd->spi, &msg);
++}
++
++/* The comments are taken straight from the data sheet */
++static int ltv350qv_power_on(struct ltv350qv *lcd)
++{
++	int ret;
++
++	/* Power On Reset Display off State */
++	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000))
++		goto err;
++	msleep(15);
++
++	/* Power Setting Function 1 */
++	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE))
++		goto err;
++	if (ltv350qv_write_reg(lcd, LTV_PWRCTL2, LTV_VCOML_ENABLE))
++		goto err_power1;
++
++	/* Power Setting Function 2 */
++	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++			       LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
++			       | LTV_SUPPLY_CURRENT(5)))
++		goto err_power2;
++
++	msleep(55);
++
++	/* Instruction Setting */
++	ret = ltv350qv_write_reg(lcd, LTV_IFCTL,
++				 LTV_NMD | LTV_REV | LTV_NL(0x1d));
++	ret |= ltv350qv_write_reg(lcd, LTV_DATACTL,
++				  LTV_DS_SAME | LTV_CHS_480
++				  | LTV_DF_RGB | LTV_RGB_BGR);
++	ret |= ltv350qv_write_reg(lcd, LTV_ENTRY_MODE,
++				  LTV_VSPL_ACTIVE_LOW
++				  | LTV_HSPL_ACTIVE_LOW
++				  | LTV_DPL_SAMPLE_RISING
++				  | LTV_EPL_ACTIVE_LOW
++				  | LTV_SS_RIGHT_TO_LEFT);
++	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL1, LTV_CLW(3));
++	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
++				  LTV_NW_INV_1LINE | LTV_FWI(3));
++	ret |= ltv350qv_write_reg(lcd, LTV_VBP, 0x000a);
++	ret |= ltv350qv_write_reg(lcd, LTV_HBP, 0x0021);
++	ret |= ltv350qv_write_reg(lcd, LTV_SOTCTL, LTV_SDT(3) | LTV_EQ(0));
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(0), 0x0103);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(1), 0x0301);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(2), 0x1f0f);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(3), 0x1f0f);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(4), 0x0707);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(5), 0x0307);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(6), 0x0707);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(7), 0x0000);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(8), 0x0004);
++	ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(9), 0x0000);
++	if (ret)
++		goto err_settings;
++
++	/* Wait more than 2 frames */
++	msleep(20);
++
++	/* Display On Sequence */
++	ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++				 LTV_VCOM_DISABLE | LTV_VCOMOUT_ENABLE
++				 | LTV_POWER_ON | LTV_DRIVE_CURRENT(5)
++				 | LTV_SUPPLY_CURRENT(5));
++	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
++				  LTV_NW_INV_1LINE | LTV_DSC | LTV_FWI(3));
++	if (ret)
++		goto err_disp_on;
++
++	/* Display should now be ON. Phew. */
++	return 0;
++
++err_disp_on:
++	/*
++	 * Try to recover. Error handling probably isn't very useful
++	 * at this point, just make a best effort to switch the panel
++	 * off.
++	 */
++	ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++			   LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
++			   | LTV_SUPPLY_CURRENT(5));
++	ltv350qv_write_reg(lcd, LTV_GATECTL2,
++			   LTV_NW_INV_1LINE | LTV_FWI(3));
++err_settings:
++err_power2:
++err_power1:
++	ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
++	msleep(1);
++err:
++	ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
++	return -EIO;
++}
++
++static int ltv350qv_power_off(struct ltv350qv *lcd)
++{
++	int ret;
++
++	/* Display Off Sequence */
++	ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++				 LTV_VCOM_DISABLE
++				 | LTV_DRIVE_CURRENT(5)
++				 | LTV_SUPPLY_CURRENT(5));
++	ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
++				  LTV_NW_INV_1LINE | LTV_FWI(3));
++
++	/* Power down setting 1 */
++	ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
++
++	/* Wait at least 1 ms */
++	msleep(1);
++
++	/* Power down setting 2 */
++	ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
++
++	/*
++	 * No point in trying to recover here. If we can't switch the
++	 * panel off, what are we supposed to do other than inform the
++	 * user about the failure?
++	 */
++	if (ret)
++		return -EIO;
++
++	/* Display power should now be OFF */
++	return 0;
++}
++
++static int ltv350qv_power(struct ltv350qv *lcd, int power)
++{
++	int ret = 0;
++
++	if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
++		ret = ltv350qv_power_on(lcd);
++	else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
++		ret = ltv350qv_power_off(lcd);
++
++	if (!ret)
++		lcd->power = power;
++
++	return ret;
++}
++
++static int ltv350qv_set_power(struct lcd_device *ld, int power)
++{
++	struct ltv350qv *lcd;
++
++	lcd = lcd_get_data(ld);
++	return ltv350qv_power(lcd, power);
++}
++
++static int ltv350qv_get_power(struct lcd_device *ld)
++{
++	struct ltv350qv *lcd;
++
++	lcd = lcd_get_data(ld);
++	return lcd->power;
++}
++
++static struct lcd_ops ltv_ops = {
++	.get_power	= ltv350qv_get_power,
++	.set_power	= ltv350qv_set_power,
++};
++
++static int __devinit ltv350qv_probe(struct spi_device *spi)
++{
++	struct ltv350qv *lcd;
++	struct lcd_device *ld;
++	int ret;
++
++	lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL);
++	if (!lcd)
++		return -ENOMEM;
++
++	lcd->spi = spi;
++	lcd->power = FB_BLANK_POWERDOWN;
++	lcd->buffer = kzalloc(8, GFP_KERNEL);
++
++	ld = lcd_device_register("ltv350qv", &spi->dev, lcd, &ltv_ops);
++	if (IS_ERR(ld)) {
++		ret = PTR_ERR(ld);
++		goto out_free_lcd;
++	}
++	lcd->ld = ld;
++
++	ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK);
++	if (ret)
++		goto out_unregister;
++
++	dev_set_drvdata(&spi->dev, lcd);
++
++	return 0;
++
++out_unregister:
++	lcd_device_unregister(ld);
++out_free_lcd:
++	kfree(lcd);
++	return ret;
++}
++
++static int __devexit ltv350qv_remove(struct spi_device *spi)
++{
++	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++	ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++	lcd_device_unregister(lcd->ld);
++	kfree(lcd);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int ltv350qv_suspend(struct spi_device *spi,
++			    pm_message_t state, u32 level)
++{
++	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++	if (level == SUSPEND_POWER_DOWN)
++		return ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++
++	return 0;
++}
++
++static int ltv350qv_resume(struct spi_device *spi, u32 level)
++{
++	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++	if (level == RESUME_POWER_ON)
++		return ltv350qv_power(lcd, FB_BLANK_UNBLANK);
++
++	return 0;
++}
++#else
++#define ltv350qv_suspend	NULL
++#define ltv350qv_resume		NULL
++#endif
++
++/* Power down all displays on reboot, poweroff or halt */
++static void ltv350qv_shutdown(struct spi_device *spi)
++{
++	struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++	ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++}
++
++static struct spi_driver ltv350qv_driver = {
++	.driver = {
++		.name		= "ltv350qv",
++		.bus		= &spi_bus_type,
++		.owner		= THIS_MODULE,
++	},
++
++	.probe		= ltv350qv_probe,
++	.remove		= __devexit_p(ltv350qv_remove),
++	.shutdown	= ltv350qv_shutdown,
++	.suspend	= ltv350qv_suspend,
++	.resume		= ltv350qv_resume,
++};
++
++static int __init ltv350qv_init(void)
++{
++	return spi_register_driver(&ltv350qv_driver);
++}
++
++static void __exit ltv350qv_exit(void)
++{
++	spi_unregister_driver(&ltv350qv_driver);
++}
++module_init(ltv350qv_init);
++module_exit(ltv350qv_exit);
++
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/video/backlight/ltv350qv.h b/drivers/video/backlight/ltv350qv.h
+new file mode 100644
+index 0000000..189112e
+--- /dev/null
++++ b/drivers/video/backlight/ltv350qv.h
+@@ -0,0 +1,95 @@
++/*
++ * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel
++ *
++ * Copyright (C) 2006, 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __LTV350QV_H
++#define __LTV350QV_H
++
++#define LTV_OPC_INDEX	0x74
++#define LTV_OPC_DATA	0x76
++
++#define LTV_ID		0x00		/* ID Read */
++#define LTV_IFCTL	0x01		/* Display Interface Control */
++#define LTV_DATACTL	0x02		/* Display Data Control */
++#define LTV_ENTRY_MODE	0x03		/* Entry Mode */
++#define LTV_GATECTL1	0x04		/* Gate Control 1 */
++#define LTV_GATECTL2	0x05		/* Gate Control 2 */
++#define LTV_VBP		0x06		/* Vertical Back Porch */
++#define LTV_HBP		0x07		/* Horizontal Back Porch */
++#define LTV_SOTCTL	0x08		/* Source Output Timing Control */
++#define LTV_PWRCTL1	0x09		/* Power Control 1 */
++#define LTV_PWRCTL2	0x0a		/* Power Control 2 */
++#define LTV_GAMMA(x)	(0x10 + (x))	/* Gamma control */
++
++/* Bit definitions for LTV_IFCTL */
++#define LTV_IM			(1 << 15)
++#define LTV_NMD			(1 << 14)
++#define LTV_SSMD		(1 << 13)
++#define LTV_REV			(1 <<  7)
++#define LTV_NL(x)		(((x) & 0x001f) << 0)
++
++/* Bit definitions for LTV_DATACTL */
++#define LTV_DS_SAME		(0 << 12)
++#define LTV_DS_D_TO_S		(1 << 12)
++#define LTV_DS_S_TO_D		(2 << 12)
++#define LTV_CHS_384		(0 <<  9)
++#define LTV_CHS_480		(1 <<  9)
++#define LTV_CHS_492		(2 <<  9)
++#define LTV_DF_RGB		(0 <<  6)
++#define LTV_DF_RGBX		(1 <<  6)
++#define LTV_DF_XRGB		(2 <<  6)
++#define LTV_RGB_RGB		(0 <<  2)
++#define LTV_RGB_BGR		(1 <<  2)
++#define LTV_RGB_GRB		(2 <<  2)
++#define LTV_RGB_RBG		(3 <<  2)
++
++/* Bit definitions for LTV_ENTRY_MODE */
++#define LTV_VSPL_ACTIVE_LOW	(0 << 15)
++#define LTV_VSPL_ACTIVE_HIGH	(1 << 15)
++#define LTV_HSPL_ACTIVE_LOW	(0 << 14)
++#define LTV_HSPL_ACTIVE_HIGH	(1 << 14)
++#define LTV_DPL_SAMPLE_RISING	(0 << 13)
++#define LTV_DPL_SAMPLE_FALLING	(1 << 13)
++#define LTV_EPL_ACTIVE_LOW	(0 << 12)
++#define LTV_EPL_ACTIVE_HIGH	(1 << 12)
++#define LTV_SS_LEFT_TO_RIGHT	(0 <<  8)
++#define LTV_SS_RIGHT_TO_LEFT	(1 <<  8)
++#define LTV_STB			(1 <<  1)
++
++/* Bit definitions for LTV_GATECTL1 */
++#define LTV_CLW(x)		(((x) & 0x0007) << 12)
++#define LTV_GAON		(1 <<  5)
++#define LTV_SDR			(1 <<  3)
++
++/* Bit definitions for LTV_GATECTL2 */
++#define LTV_NW_INV_FRAME	(0 << 14)
++#define LTV_NW_INV_1LINE	(1 << 14)
++#define LTV_NW_INV_2LINE	(2 << 14)
++#define LTV_DSC			(1 << 12)
++#define LTV_GIF			(1 <<  8)
++#define LTV_FHN			(1 <<  7)
++#define LTV_FTI(x)		(((x) & 0x0003) << 4)
++#define LTV_FWI(x)		(((x) & 0x0003) << 0)
++
++/* Bit definitions for LTV_SOTCTL */
++#define LTV_SDT(x)		(((x) & 0x0007) << 10)
++#define LTV_EQ(x)		(((x) & 0x0007) <<  2)
++
++/* Bit definitions for LTV_PWRCTL1 */
++#define LTV_VCOM_DISABLE	(1 << 14)
++#define LTV_VCOMOUT_ENABLE	(1 << 11)
++#define LTV_POWER_ON		(1 <<  9)
++#define LTV_DRIVE_CURRENT(x)	(((x) & 0x0007) << 4)	/* 0=off, 5=max */
++#define LTV_SUPPLY_CURRENT(x)	(((x) & 0x0007) << 0)	/* 0=off, 5=max */
++
++/* Bit definitions for LTV_PWRCTL2 */
++#define LTV_VCOML_ENABLE	(1 << 13)
++#define LTV_VCOML_VOLTAGE(x)	(((x) & 0x001f) << 8)	/* 0=1V, 31=-1V */
++#define LTV_VCOMH_VOLTAGE(x)	(((x) & 0x001f) << 0)	/* 0=3V, 31=4.5V */
++
++#endif /* __LTV350QV_H */
+diff --git a/include/asm-avr32/arch-at32ap/at32ap7000.h b/include/asm-avr32/arch-at32ap/at32ap7000.h
+deleted file mode 100644
+index 3914d7b..0000000
+--- a/include/asm-avr32/arch-at32ap/at32ap7000.h
++++ /dev/null
+@@ -1,35 +0,0 @@
+-/*
+- * Pin definitions for AT32AP7000.
+- *
+- * Copyright (C) 2006 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-#ifndef __ASM_ARCH_AT32AP7000_H__
+-#define __ASM_ARCH_AT32AP7000_H__
+-
+-#define GPIO_PERIPH_A	0
+-#define GPIO_PERIPH_B	1
+-
+-#define NR_GPIO_CONTROLLERS	4
+-
+-/*
+- * Pin numbers identifying specific GPIO pins on the chip. They can
+- * also be converted to IRQ numbers by passing them through
+- * gpio_to_irq().
+- */
+-#define GPIO_PIOA_BASE	(0)
+-#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
+-#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
+-#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
+-#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
+-
+-#define GPIO_PIN_PA(N)	(GPIO_PIOA_BASE + (N))
+-#define GPIO_PIN_PB(N)	(GPIO_PIOB_BASE + (N))
+-#define GPIO_PIN_PC(N)	(GPIO_PIOC_BASE + (N))
+-#define GPIO_PIN_PD(N)	(GPIO_PIOD_BASE + (N))
+-#define GPIO_PIN_PE(N)	(GPIO_PIOE_BASE + (N))
+-
+-#endif /* __ASM_ARCH_AT32AP7000_H__ */
+diff --git a/include/asm-avr32/arch-at32ap/at32ap700x.h b/include/asm-avr32/arch-at32ap/at32ap700x.h
+new file mode 100644
+index 0000000..99684d6
+--- /dev/null
++++ b/include/asm-avr32/arch-at32ap/at32ap700x.h
+@@ -0,0 +1,35 @@
++/*
++ * Pin definitions for AT32AP7000.
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_ARCH_AT32AP700X_H__
++#define __ASM_ARCH_AT32AP700X_H__
++
++#define GPIO_PERIPH_A	0
++#define GPIO_PERIPH_B	1
++
++#define NR_GPIO_CONTROLLERS	4
++
++/*
++ * Pin numbers identifying specific GPIO pins on the chip. They can
++ * also be converted to IRQ numbers by passing them through
++ * gpio_to_irq().
++ */
++#define GPIO_PIOA_BASE	(0)
++#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
++#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
++#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
++#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
++
++#define GPIO_PIN_PA(N)	(GPIO_PIOA_BASE + (N))
++#define GPIO_PIN_PB(N)	(GPIO_PIOB_BASE + (N))
++#define GPIO_PIN_PC(N)	(GPIO_PIOC_BASE + (N))
++#define GPIO_PIN_PD(N)	(GPIO_PIOD_BASE + (N))
++#define GPIO_PIN_PE(N)	(GPIO_PIOE_BASE + (N))
++
++#endif /* __ASM_ARCH_AT32AP700X_H__ */
+diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
+index 0215965..7aa1c29 100644
+--- a/include/asm-avr32/arch-at32ap/board.h
++++ b/include/asm-avr32/arch-at32ap/board.h
+@@ -6,6 +6,8 @@
+ 
+ #include <linux/types.h>
+ 
++#define GPIO_PIN_NONE	(-1)
++
+ /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
+ void at32_add_system_devices(void);
+ 
+@@ -31,11 +33,26 @@ struct spi_board_info;
+ struct platform_device *
+ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
+ 
++struct platform_device *at32_add_device_twi(unsigned int id);
++
+ struct atmel_lcdfb_info;
+ struct platform_device *
+ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+ 		     unsigned long fbmem_start, unsigned long fbmem_len);
+ 
++struct usba_platform_data {
++	int vbus_pin;
++};
++struct platform_device *
++at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
++
++struct ide_platform_data {
++	u8      cs;
++};
++struct platform_device *
++at32_add_device_ide(unsigned int id, unsigned int extint,
++		    struct ide_platform_data *data);
++
+ /* depending on what's hooked up, not all SSC pins will be used */
+ #define	ATMEL_SSC_TK		0x01
+ #define	ATMEL_SSC_TF		0x02
+@@ -50,4 +67,26 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+ struct platform_device *
+ at32_add_device_ssc(unsigned int id, unsigned int flags);
+ 
++struct platform_device *at32_add_device_twi(unsigned int id);
++
++struct mci_platform_data {
++	int detect_pin;
++	int wp_pin;
++};
++struct platform_device *
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
++struct platform_device *at32_add_device_ac97c(unsigned int id);
++struct platform_device *at32_add_device_abdac(unsigned int id);
++
++struct cf_platform_data {
++	int	detect_pin;
++	int	reset_pin;
++	int	vcc_pin;
++	int	ready_pin;
++	u8	cs;
++};
++struct platform_device *
++at32_add_device_cf(unsigned int id, unsigned int extint,
++		struct cf_platform_data *data);
++
+ #endif /* __ASM_ARCH_BOARD_H */
+diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/include/asm-avr32/arch-at32ap/cpu.h
+index a762f42..0dc2026 100644
+--- a/include/asm-avr32/arch-at32ap/cpu.h
++++ b/include/asm-avr32/arch-at32ap/cpu.h
+@@ -14,7 +14,7 @@
+  * Only AT32AP7000 is defined for now. We can identify the specific
+  * chip at runtime, but I'm not sure if it's really worth it.
+  */
+-#ifdef CONFIG_CPU_AT32AP7000
++#ifdef CONFIG_CPU_AT32AP700X
+ # define cpu_is_at32ap7000()	(1)
+ #else
+ # define cpu_is_at32ap7000()	(0)
+diff --git a/include/asm-avr32/arch-at32ap/io.h b/include/asm-avr32/arch-at32ap/io.h
+index ee59e40..4ec6abc 100644
+--- a/include/asm-avr32/arch-at32ap/io.h
++++ b/include/asm-avr32/arch-at32ap/io.h
+@@ -4,7 +4,7 @@
+ /* For "bizarre" halfword swapping */
+ #include <linux/byteorder/swabb.h>
+ 
+-#if defined(CONFIG_AP7000_32_BIT_SMC)
++#if defined(CONFIG_AP700X_32_BIT_SMC)
+ # define __swizzle_addr_b(addr)	(addr ^ 3UL)
+ # define __swizzle_addr_w(addr)	(addr ^ 2UL)
+ # define __swizzle_addr_l(addr)	(addr)
+@@ -14,7 +14,7 @@
+ # define __mem_ioswabb(a, x)	(x)
+ # define __mem_ioswabw(a, x)	swab16(x)
+ # define __mem_ioswabl(a, x)	swab32(x)
+-#elif defined(CONFIG_AP7000_16_BIT_SMC)
++#elif defined(CONFIG_AP700X_16_BIT_SMC)
+ # define __swizzle_addr_b(addr)	(addr ^ 1UL)
+ # define __swizzle_addr_w(addr)	(addr)
+ # define __swizzle_addr_l(addr)	(addr)
+diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h
+index 9930871..135e034 100644
+--- a/include/asm-avr32/arch-at32ap/portmux.h
++++ b/include/asm-avr32/arch-at32ap/portmux.h
+@@ -19,10 +19,23 @@
+ #define AT32_GPIOF_OUTPUT	0x00000002	/* (OUT) Enable output driver */
+ #define AT32_GPIOF_HIGH		0x00000004	/* (OUT) Set output high */
+ #define AT32_GPIOF_DEGLITCH	0x00000008	/* (IN) Filter glitches */
++#define AT32_GPIOF_MULTIDRV	0x00000010	/* Enable multidriver option */
+ 
+ void at32_select_periph(unsigned int pin, unsigned int periph,
+ 			unsigned long flags);
+ void at32_select_gpio(unsigned int pin, unsigned long flags);
+ void at32_reserve_pin(unsigned int pin);
+ 
++#ifdef CONFIG_GPIO_DEV
++
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port);
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
++void at32_deselect_pins(unsigned int port, u32 pins);
++
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
++
++#endif /* CONFIG_GPIO_DEV */
++
+ #endif /* __ASM_ARCH_PORTMUX_H__ */
+diff --git a/include/asm-avr32/arch-at32ap/smc.h b/include/asm-avr32/arch-at32ap/smc.h
+index 07152b7..c98eea4 100644
+--- a/include/asm-avr32/arch-at32ap/smc.h
++++ b/include/asm-avr32/arch-at32ap/smc.h
+@@ -15,22 +15,50 @@
+ /*
+  * All timing parameters are in nanoseconds.
+  */
++struct smc_timing {
++	/* Delay from address valid to assertion of given strobe */
++	int ncs_read_setup;
++	int nrd_setup;
++	int ncs_write_setup;
++	int nwe_setup;
++
++	/* Pulse length of given strobe */
++	int ncs_read_pulse;
++	int nrd_pulse;
++	int ncs_write_pulse;
++	int nwe_pulse;
++
++	/* Total cycle length of given operation */
++	int read_cycle;
++	int write_cycle;
++
++	/* Minimal recovery times, will extend cycle if needed */
++	int ncs_read_recover;
++	int nrd_recover;
++	int ncs_write_recover;
++	int nwe_recover;
++};
++
++/*
++ * All timing parameters are in clock cycles.
++ */
+ struct smc_config {
++
+ 	/* Delay from address valid to assertion of given strobe */
+-	u16		ncs_read_setup;
+-	u16		nrd_setup;
+-	u16		ncs_write_setup;
+-	u16		nwe_setup;
++	u8		ncs_read_setup;
++	u8		nrd_setup;
++	u8		ncs_write_setup;
++	u8		nwe_setup;
+ 
+ 	/* Pulse length of given strobe */
+-	u16		ncs_read_pulse;
+-	u16		nrd_pulse;
+-	u16		ncs_write_pulse;
+-	u16		nwe_pulse;
++	u8		ncs_read_pulse;
++	u8		nrd_pulse;
++	u8		ncs_write_pulse;
++	u8		nwe_pulse;
+ 
+ 	/* Total cycle length of given operation */
+-	u16		read_cycle;
+-	u16		write_cycle;
++	u8		read_cycle;
++	u8		write_cycle;
+ 
+ 	/* Bus width in bytes */
+ 	u8		bus_width;
+@@ -76,6 +104,9 @@ struct smc_config {
+ 	unsigned int	tdf_mode:1;
+ };
+ 
++extern void smc_set_timing(struct smc_config *config,
++			   const struct smc_timing *timing);
++
+ extern int smc_set_configuration(int cs, const struct smc_config *config);
+ extern struct smc_config *smc_get_configuration(int cs);
+ 
+diff --git a/include/asm-avr32/dma-controller.h b/include/asm-avr32/dma-controller.h
+new file mode 100644
+index 0000000..56a4965
+--- /dev/null
++++ b/include/asm-avr32/dma-controller.h
+@@ -0,0 +1,166 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_AVR32_DMA_CONTROLLER_H
++#define __ASM_AVR32_DMA_CONTROLLER_H
++
++#include <linux/device.h>
++
++#define DMA_DIR_MEM_TO_MEM		0x0000
++#define DMA_DIR_MEM_TO_PERIPH		0x0001
++#define DMA_DIR_PERIPH_TO_MEM		0x0002
++#define DMA_DIR_PERIPH_TO_PERIPH	0x0003
++
++#define DMA_WIDTH_8BIT			0
++#define DMA_WIDTH_16BIT			1
++#define DMA_WIDTH_32BIT			2
++
++struct dma_request {
++	struct dma_controller *dmac;
++	struct list_head list;
++
++	unsigned short channel;
++
++	void (*xfer_complete)(struct dma_request *req);
++	void (*block_complete)(struct dma_request *req);
++	void (*error)(struct dma_request *req);
++};
++
++struct dma_request_sg {
++	struct dma_request req;
++
++	int nr_sg;
++	struct scatterlist *sg;
++	unsigned long block_size;
++	unsigned int nr_blocks;
++
++	dma_addr_t data_reg;
++	unsigned short periph_id;
++
++	unsigned char direction;
++	unsigned char width;
++};
++#define to_dma_request_sg(_req)				\
++	container_of(_req, struct dma_request_sg, req)
++
++struct dma_request_cyclic {
++	struct dma_request req;
++
++        int periods;
++	unsigned long buffer_size;
++
++        dma_addr_t buffer_start;
++	dma_addr_t data_reg;
++
++	unsigned short periph_id;
++	unsigned char direction;
++	unsigned char width;
++
++        void *dev_id;
++};
++#define to_dma_request_cyclic(_req)				\
++	container_of(_req, struct dma_request_cyclic, req)
++
++struct dma_request_memcpy {
++	struct dma_request req;
++
++	dma_addr_t src_addr;
++	unsigned int src_width;
++	unsigned int src_stride;
++
++	dma_addr_t dst_addr;
++	unsigned int dst_width;
++	unsigned int dst_stride;
++
++	size_t length;
++
++	unsigned short src_reverse:1;
++	unsigned short dst_reverse:1;
++};
++#define to_dma_request_memcpy(_req)				\
++	container_of(_req, struct dma_request_memcpy, req)
++
++struct dma_controller {
++	struct list_head list;
++	int id;
++	struct device *dev;
++
++	int (*alloc_channel)(struct dma_controller *dmac);
++	void (*release_channel)(struct dma_controller *dmac,
++				int channel);
++	int (*prepare_request_sg)(struct dma_controller *dmac,
++				  struct dma_request_sg *req);
++        int (*prepare_request_cyclic)(struct dma_controller *dmac,
++				      struct dma_request_cyclic *req);
++	int (*prepare_request_memcpy)(struct dma_controller *dmac,
++				      struct dma_request_memcpy *req);
++	int (*start_request)(struct dma_controller *dmac,
++			     unsigned int channel);
++	int (*stop_request)(struct dma_controller *dmac,
++                            unsigned int channel);
++        dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
++                                      unsigned int channel);
++};
++
++static inline int
++dma_alloc_channel(struct dma_controller *dmac)
++{
++	return dmac->alloc_channel(dmac);
++}
++
++static inline void
++dma_release_channel(struct dma_controller *dmac, int chan)
++{
++	dmac->release_channel(dmac, chan);
++}
++
++static inline int
++dma_prepare_request_sg(struct dma_controller *dmac,
++		       struct dma_request_sg *req)
++{
++	return dmac->prepare_request_sg(dmac, req);
++}
++
++static inline int
++dma_prepare_request_cyclic(struct dma_controller *dmac,
++			   struct dma_request_cyclic *req)
++{
++	return dmac->prepare_request_cyclic(dmac, req);
++}
++
++static inline int
++dma_prepare_request_memcpy(struct dma_controller *dmac,
++			   struct dma_request_memcpy *req)
++{
++	return dmac->prepare_request_memcpy(dmac, req);
++}
++
++static inline int
++dma_start_request(struct dma_controller *dmac,
++		  unsigned int channel)
++{
++	return dmac->start_request(dmac, channel);
++}
++
++static inline int
++dma_stop_request(struct dma_controller *dmac,
++                 unsigned int channel)
++{
++	return dmac->stop_request(dmac, channel);
++}
++
++static inline dma_addr_t
++dma_get_current_pos(struct dma_controller *dmac,
++                    unsigned int channel)
++{
++	return dmac->get_current_pos(dmac, channel);
++}
++
++extern int register_dma_controller(struct dma_controller *dmac);
++extern struct dma_controller *find_dma_controller(int id);
++
++#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
+diff --git a/include/asm-avr32/dma-mapping.h b/include/asm-avr32/dma-mapping.h
+index 21bb60b..81e3426 100644
+--- a/include/asm-avr32/dma-mapping.h
++++ b/include/asm-avr32/dma-mapping.h
+@@ -264,7 +264,11 @@ static inline void
+ dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ 			size_t size, enum dma_data_direction direction)
+ {
+-	dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
++	/*
++	 * No need to do anything since the CPU isn't supposed to
++	 * touch this memory after we flushed it at mapping- or
++	 * sync-for-device time.
++	 */
+ }
+ 
+ static inline void
+@@ -309,12 +313,11 @@ static inline void
+ dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+ 		    int nents, enum dma_data_direction direction)
+ {
+-	int i;
+-
+-	for (i = 0; i < nents; i++) {
+-		dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
+-			       sg[i].length, direction);
+-	}
++	/*
++	 * No need to do anything since the CPU isn't supposed to
++	 * touch this memory after we flushed it at mapping- or
++	 * sync-for-device time.
++	 */
+ }
+ 
+ static inline void
+diff --git a/include/asm-avr32/system.h b/include/asm-avr32/system.h
+index a8236ba..dc2d527 100644
+--- a/include/asm-avr32/system.h
++++ b/include/asm-avr32/system.h
+@@ -73,11 +73,16 @@ extern struct task_struct *__switch_to(struct task_struct *,
+ 
+ extern void __xchg_called_with_bad_pointer(void);
+ 
+-#ifdef __CHECKER__
+-extern unsigned long __builtin_xchg(void *ptr, unsigned long x);
+-#endif
++static inline unsigned long xchg_u32(u32 val, volatile u32 *m)
++{
++	u32 ret;
+ 
+-#define xchg_u32(val, m) __builtin_xchg((void *)m, val)
++	asm volatile("xchg %[ret], %[m], %[val]"
++			: [ret] "=&r"(ret), "=m"(*m)
++			: "m"(*m), [m] "r"(m), [val] "r"(val)
++			: "memory");
++	return ret;
++}
+ 
+ static inline unsigned long __xchg(unsigned long x,
+ 				       volatile void *ptr,
+diff --git a/include/asm-avr32/unistd.h b/include/asm-avr32/unistd.h
+index 3b4e35b..de09009 100644
+--- a/include/asm-avr32/unistd.h
++++ b/include/asm-avr32/unistd.h
+@@ -303,6 +303,19 @@
+ #ifdef __KERNEL__
+ #define NR_syscalls		282
+ 
++/* Old stuff */
++#define __IGNORE_uselib
++#define __IGNORE_mmap
++
++/* NUMA stuff */
++#define __IGNORE_mbind
++#define __IGNORE_get_mempolicy
++#define __IGNORE_set_mempolicy
++#define __IGNORE_migrate_pages
++#define __IGNORE_move_pages
++
++/* SMP stuff */
++#define __IGNORE_getcpu
+ 
+ #define __ARCH_WANT_IPC_PARSE_VERSION
+ #define __ARCH_WANT_STAT64
+diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
+new file mode 100644
+index 0000000..0602339
+--- /dev/null
++++ b/include/linux/atmel-ssc.h
+@@ -0,0 +1,312 @@
++#ifndef __INCLUDE_ATMEL_SSC_H
++#define __INCLUDE_ATMEL_SSC_H
++
++#include <linux/platform_device.h>
++#include <linux/list.h>
++
++struct ssc_device {
++	struct list_head	list;
++	void __iomem		*regs;
++	struct platform_device	*pdev;
++	struct clk		*clk;
++	int			user;
++	int			irq;
++};
++
++struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
++void ssc_free(struct ssc_device *ssc);
++
++/* SSC register offsets */
++
++/* SSC Control Register */
++#define SSC_CR				0x00000000
++#define SSC_CR_RXDIS_SIZE			 1
++#define SSC_CR_RXDIS_OFFSET			 1
++#define SSC_CR_RXEN_SIZE			 1
++#define SSC_CR_RXEN_OFFSET			 0
++#define SSC_CR_SWRST_SIZE			 1
++#define SSC_CR_SWRST_OFFSET			15
++#define SSC_CR_TXDIS_SIZE			 1
++#define SSC_CR_TXDIS_OFFSET			 9
++#define SSC_CR_TXEN_SIZE			 1
++#define SSC_CR_TXEN_OFFSET			 8
++
++/* SSC Clock Mode Register */
++#define SSC_CMR				0x00000004
++#define SSC_CMR_DIV_SIZE			12
++#define SSC_CMR_DIV_OFFSET			 0
++
++/* SSC Receive Clock Mode Register */
++#define SSC_RCMR			0x00000010
++#define SSC_RCMR_CKG_SIZE			 2
++#define SSC_RCMR_CKG_OFFSET			 6
++#define SSC_RCMR_CKI_SIZE			 1
++#define SSC_RCMR_CKI_OFFSET			 5
++#define SSC_RCMR_CKO_SIZE			 3
++#define SSC_RCMR_CKO_OFFSET			 2
++#define SSC_RCMR_CKS_SIZE			 2
++#define SSC_RCMR_CKS_OFFSET			 0
++#define SSC_RCMR_PERIOD_SIZE			 8
++#define SSC_RCMR_PERIOD_OFFSET			24
++#define SSC_RCMR_START_SIZE			 4
++#define SSC_RCMR_START_OFFSET			 8
++#define SSC_RCMR_STOP_SIZE			 1
++#define SSC_RCMR_STOP_OFFSET			12
++#define SSC_RCMR_STTDLY_SIZE			 8
++#define SSC_RCMR_STTDLY_OFFSET			16
++
++/* SSC Receive Frame Mode Register */
++#define SSC_RFMR			0x00000014
++#define SSC_RFMR_DATLEN_SIZE			 5
++#define SSC_RFMR_DATLEN_OFFSET			 0
++#define SSC_RFMR_DATNB_SIZE			 4
++#define SSC_RFMR_DATNB_OFFSET			 8
++#define SSC_RFMR_FSEDGE_SIZE			 1
++#define SSC_RFMR_FSEDGE_OFFSET			24
++#define SSC_RFMR_FSLEN_SIZE			 4
++#define SSC_RFMR_FSLEN_OFFSET			16
++#define SSC_RFMR_FSOS_SIZE			 4
++#define SSC_RFMR_FSOS_OFFSET			20
++#define SSC_RFMR_LOOP_SIZE			 1
++#define SSC_RFMR_LOOP_OFFSET			 5
++#define SSC_RFMR_MSBF_SIZE			 1
++#define SSC_RFMR_MSBF_OFFSET			 7
++
++/* SSC Transmit Clock Mode Register */
++#define SSC_TCMR			0x00000018
++#define SSC_TCMR_CKG_SIZE			 2
++#define SSC_TCMR_CKG_OFFSET			 6
++#define SSC_TCMR_CKI_SIZE			 1
++#define SSC_TCMR_CKI_OFFSET			 5
++#define SSC_TCMR_CKO_SIZE			 3
++#define SSC_TCMR_CKO_OFFSET			 2
++#define SSC_TCMR_CKS_SIZE			 2
++#define SSC_TCMR_CKS_OFFSET			 0
++#define SSC_TCMR_PERIOD_SIZE			 8
++#define SSC_TCMR_PERIOD_OFFSET			24
++#define SSC_TCMR_START_SIZE			 4
++#define SSC_TCMR_START_OFFSET			 8
++#define SSC_TCMR_STTDLY_SIZE			 8
++#define SSC_TCMR_STTDLY_OFFSET			16
++
++/* SSC Transmit Frame Mode Register */
++#define SSC_TFMR			0x0000001c
++#define SSC_TFMR_DATDEF_SIZE			 1
++#define SSC_TFMR_DATDEF_OFFSET			 5
++#define SSC_TFMR_DATLEN_SIZE			 5
++#define SSC_TFMR_DATLEN_OFFSET			 0
++#define SSC_TFMR_DATNB_SIZE			 4
++#define SSC_TFMR_DATNB_OFFSET			 8
++#define SSC_TFMR_FSDEN_SIZE			 1
++#define SSC_TFMR_FSDEN_OFFSET			23
++#define SSC_TFMR_FSEDGE_SIZE			 1
++#define SSC_TFMR_FSEDGE_OFFSET			24
++#define SSC_TFMR_FSLEN_SIZE			 4
++#define SSC_TFMR_FSLEN_OFFSET			16
++#define SSC_TFMR_FSOS_SIZE			 3
++#define SSC_TFMR_FSOS_OFFSET			20
++#define SSC_TFMR_MSBF_SIZE			 1
++#define SSC_TFMR_MSBF_OFFSET			 7
++
++/* SSC Receive Hold Register */
++#define SSC_RHR				0x00000020
++#define SSC_RHR_RDAT_SIZE			32
++#define SSC_RHR_RDAT_OFFSET			 0
++
++/* SSC Transmit Hold Register */
++#define SSC_THR				0x00000024
++#define SSC_THR_TDAT_SIZE			32
++#define SSC_THR_TDAT_OFFSET			 0
++
++/* SSC Receive Sync. Holding Register */
++#define SSC_RSHR			0x00000030
++#define SSC_RSHR_RSDAT_SIZE			16
++#define SSC_RSHR_RSDAT_OFFSET			 0
++
++/* SSC Transmit Sync. Holding Register */
++#define SSC_TSHR			0x00000034
++#define SSC_TSHR_TSDAT_SIZE			16
++#define SSC_TSHR_RSDAT_OFFSET			 0
++
++/* SSC Receive Compare 0 Register */
++#define SSC_RC0R			0x00000038
++#define SSC_RC0R_CP0_SIZE			16
++#define SSC_RC0R_CP0_OFFSET			 0
++
++/* SSC Receive Compare 1 Register */
++#define SSC_RC1R			0x0000003c
++#define SSC_RC1R_CP1_SIZE			16
++#define SSC_RC1R_CP1_OFFSET			 0
++
++/* SSC Status Register */
++#define SSC_SR				0x00000040
++#define SSC_SR_CP0_SIZE				 1
++#define SSC_SR_CP0_OFFSET			 8
++#define SSC_SR_CP1_SIZE				 1
++#define SSC_SR_CP1_OFFSET			 9
++#define SSC_SR_ENDRX_SIZE			 1
++#define SSC_SR_ENDRX_OFFSET			 6
++#define SSC_SR_ENDTX_SIZE			 1
++#define SSC_SR_ENDTX_OFFSET			 2
++#define SSC_SR_OVRUN_SIZE			 1
++#define SSC_SR_OVRUN_OFFSET			 5
++#define SSC_SR_RXBUFF_SIZE			 1
++#define SSC_SR_RXBUFF_OFFSET			 7
++#define SSC_SR_RXEN_SIZE			 1
++#define SSC_SR_RXEN_OFFSET			17
++#define SSC_SR_RXRDY_SIZE			 1
++#define SSC_SR_RXRDY_OFFSET			 4
++#define SSC_SR_RXSYN_SIZE			 1
++#define SSC_SR_RXSYN_OFFSET			11
++#define SSC_SR_TXBUFE_SIZE			 1
++#define SSC_SR_TXBUFE_OFFSET			 3
++#define SSC_SR_TXEMPTY_SIZE			 1
++#define SSC_SR_TXEMPTY_OFFSET			 1
++#define SSC_SR_TXEN_SIZE			 1
++#define SSC_SR_TXEN_OFFSET			16
++#define SSC_SR_TXRDY_SIZE			 1
++#define SSC_SR_TXRDY_OFFSET			 0
++#define SSC_SR_TXSYN_SIZE			 1
++#define SSC_SR_TXSYN_OFFSET			10
++
++/* SSC Interrupt Enable Register */
++#define SSC_IER				0x00000044
++#define SSC_IER_CP0_SIZE			 1
++#define SSC_IER_CP0_OFFSET			 8
++#define SSC_IER_CP1_SIZE			 1
++#define SSC_IER_CP1_OFFSET			 9
++#define SSC_IER_ENDRX_SIZE			 1
++#define SSC_IER_ENDRX_OFFSET			 6
++#define SSC_IER_ENDTX_SIZE			 1
++#define SSC_IER_ENDTX_OFFSET			 2
++#define SSC_IER_OVRUN_SIZE			 1
++#define SSC_IER_OVRUN_OFFSET			 5
++#define SSC_IER_RXBUFF_SIZE			 1
++#define SSC_IER_RXBUFF_OFFSET			 7
++#define SSC_IER_RXRDY_SIZE			 1
++#define SSC_IER_RXRDY_OFFSET			 4
++#define SSC_IER_RXSYN_SIZE			 1
++#define SSC_IER_RXSYN_OFFSET			11
++#define SSC_IER_TXBUFE_SIZE			 1
++#define SSC_IER_TXBUFE_OFFSET			 3
++#define SSC_IER_TXEMPTY_SIZE			 1
++#define SSC_IER_TXEMPTY_OFFSET			 1
++#define SSC_IER_TXRDY_SIZE			 1
++#define SSC_IER_TXRDY_OFFSET			 0
++#define SSC_IER_TXSYN_SIZE			 1
++#define SSC_IER_TXSYN_OFFSET			10
++
++/* SSC Interrupt Disable Register */
++#define SSC_IDR				0x00000048
++#define SSC_IDR_CP0_SIZE			 1
++#define SSC_IDR_CP0_OFFSET			 8
++#define SSC_IDR_CP1_SIZE			 1
++#define SSC_IDR_CP1_OFFSET			 9
++#define SSC_IDR_ENDRX_SIZE			 1
++#define SSC_IDR_ENDRX_OFFSET			 6
++#define SSC_IDR_ENDTX_SIZE			 1
++#define SSC_IDR_ENDTX_OFFSET			 2
++#define SSC_IDR_OVRUN_SIZE			 1
++#define SSC_IDR_OVRUN_OFFSET			 5
++#define SSC_IDR_RXBUFF_SIZE			 1
++#define SSC_IDR_RXBUFF_OFFSET			 7
++#define SSC_IDR_RXRDY_SIZE			 1
++#define SSC_IDR_RXRDY_OFFSET			 4
++#define SSC_IDR_RXSYN_SIZE			 1
++#define SSC_IDR_RXSYN_OFFSET			11
++#define SSC_IDR_TXBUFE_SIZE			 1
++#define SSC_IDR_TXBUFE_OFFSET			 3
++#define SSC_IDR_TXEMPTY_SIZE			 1
++#define SSC_IDR_TXEMPTY_OFFSET			 1
++#define SSC_IDR_TXRDY_SIZE			 1
++#define SSC_IDR_TXRDY_OFFSET			 0
++#define SSC_IDR_TXSYN_SIZE			 1
++#define SSC_IDR_TXSYN_OFFSET			10
++
++/* SSC Interrupt Mask Register */
++#define SSC_IMR				0x0000004c
++#define SSC_IMR_CP0_SIZE			 1
++#define SSC_IMR_CP0_OFFSET			 8
++#define SSC_IMR_CP1_SIZE			 1
++#define SSC_IMR_CP1_OFFSET			 9
++#define SSC_IMR_ENDRX_SIZE			 1
++#define SSC_IMR_ENDRX_OFFSET			 6
++#define SSC_IMR_ENDTX_SIZE			 1
++#define SSC_IMR_ENDTX_OFFSET			 2
++#define SSC_IMR_OVRUN_SIZE			 1
++#define SSC_IMR_OVRUN_OFFSET			 5
++#define SSC_IMR_RXBUFF_SIZE			 1
++#define SSC_IMR_RXBUFF_OFFSET			 7
++#define SSC_IMR_RXRDY_SIZE			 1
++#define SSC_IMR_RXRDY_OFFSET			 4
++#define SSC_IMR_RXSYN_SIZE			 1
++#define SSC_IMR_RXSYN_OFFSET			11
++#define SSC_IMR_TXBUFE_SIZE			 1
++#define SSC_IMR_TXBUFE_OFFSET			 3
++#define SSC_IMR_TXEMPTY_SIZE			 1
++#define SSC_IMR_TXEMPTY_OFFSET			 1
++#define SSC_IMR_TXRDY_SIZE			 1
++#define SSC_IMR_TXRDY_OFFSET			 0
++#define SSC_IMR_TXSYN_SIZE			 1
++#define SSC_IMR_TXSYN_OFFSET			10
++
++/* SSC PDC Receive Pointer Register */
++#define SSC_PDC_RPR			0x00000100
++
++/* SSC PDC Receive Counter Register */
++#define SSC_PDC_RCR			0x00000104
++
++/* SSC PDC Transmit Pointer Register */
++#define SSC_PDC_TPR			0x00000108
++
++/* SSC PDC Receive Next Pointer Register */
++#define SSC_PDC_RNPR			0x00000110
++
++/* SSC PDC Receive Next Counter Register */
++#define SSC_PDC_RNCR			0x00000114
++
++/* SSC PDC Transmit Counter Register */
++#define SSC_PDC_TCR			0x0000010c
++
++/* SSC PDC Transmit Next Pointer Register */
++#define SSC_PDC_TNPR			0x00000118
++
++/* SSC PDC Transmit Next Counter Register */
++#define SSC_PDC_TNCR			0x0000011c
++
++/* SSC PDC Transfer Control Register */
++#define SSC_PDC_PTCR			0x00000120
++#define SSC_PDC_PTCR_RXTDIS_SIZE		 1
++#define SSC_PDC_PTCR_RXTDIS_OFFSET		 1
++#define SSC_PDC_PTCR_RXTEN_SIZE			 1
++#define SSC_PDC_PTCR_RXTEN_OFFSET		 0
++#define SSC_PDC_PTCR_TXTDIS_SIZE		 1
++#define SSC_PDC_PTCR_TXTDIS_OFFSET		 9
++#define SSC_PDC_PTCR_TXTEN_SIZE			 1
++#define SSC_PDC_PTCR_TXTEN_OFFSET		 8
++
++/* SSC PDC Transfer Status Register */
++#define SSC_PDC_PTSR			0x00000124
++#define SSC_PDC_PTSR_RXTEN_SIZE			 1
++#define SSC_PDC_PTSR_RXTEN_OFFSET		 0
++#define SSC_PDC_PTSR_TXTEN_SIZE			 1
++#define SSC_PDC_PTSR_TXTEN_OFFSET		 8
++
++/* Bit manipulation macros */
++#define SSC_BIT(name)					\
++	(1 << SSC_##name##_OFFSET)
++#define SSC_BF(name, value)				\
++	(((value) & ((1 << SSC_##name##_SIZE) - 1))	\
++	 << SSC_##name##_OFFSET)
++#define SSC_BFEXT(name, value)				\
++	(((value) >> SSC_##name##_OFFSET)		\
++	 & ((1 << SSC_##name##_SIZE) - 1))
++#define SSC_BFINS(name, value, old)			\
++	(((old) & ~(((1 << SSC_##name##_SIZE) - 1)	\
++	<< SSC_##name##_OFFSET)) | SSC_BF(name, value))
++
++/* Register access macros */
++#define ssc_readl(base, reg)		__raw_readl(base + SSC_##reg)
++#define ssc_writel(base, reg, value)	__raw_writel((value), base + SSC_##reg)
++
++#endif /* __INCLUDE_ATMEL_SSC_H */
+diff --git a/include/linux/spi/at73c213.h b/include/linux/spi/at73c213.h
+new file mode 100644
+index 0000000..0f20a70
+--- /dev/null
++++ b/include/linux/spi/at73c213.h
+@@ -0,0 +1,25 @@
++/*
++ * Board-specific data used to set up AT73c213 audio DAC driver.
++ */
++
++#ifndef __LINUX_SPI_AT73C213_H
++#define __LINUX_SPI_AT73C213_H
++
++/**
++ * at73c213_board_info - how the external DAC is wired to the device.
++ *
++ * @ssc_id: SSC platform_driver id the DAC shall use to stream the audio.
++ * @dac_clk: the external clock used to provide master clock to the DAC.
++ * @shortname: a short discription for the DAC, seen by userspace tools.
++ *
++ * This struct contains the configuration of the hardware connection to the
++ * external DAC. The DAC needs a master clock and a I2S audio stream. It also
++ * provides a name which is used to identify it in userspace tools.
++ */
++struct at73c213_board_info {
++	int		ssc_id;
++	struct clk	*dac_clk;
++	char		shortname[32];
++};
++
++#endif /* __LINUX_SPI_AT73C213_H */
+diff --git a/include/pcmcia/cs_types.h b/include/pcmcia/cs_types.h
+index c1d1629..5f38803 100644
+--- a/include/pcmcia/cs_types.h
++++ b/include/pcmcia/cs_types.h
+@@ -21,7 +21,7 @@
+ #include <sys/types.h>
+ #endif
+ 
+-#if defined(__arm__) || defined(__mips__)
++#if defined(__arm__) || defined(__mips__) || defined(__avr32__)
+ /* This (ioaddr_t) is exposed to userspace & hence cannot be changed. */
+ typedef u_int   ioaddr_t;
+ #else
+diff --git a/init/do_mounts.c b/init/do_mounts.c
+index 4efa1e5..0e88ed1 100644
+--- a/init/do_mounts.c
++++ b/init/do_mounts.c
+@@ -219,8 +219,14 @@ __setup("root=", root_dev_setup);
+ 
+ static int __init rootwait_setup(char *str)
+ {
+-	if (*str)
++	if (*str && *str != '=')
+ 		return 0;
++
++	if (*str)
++		printk(KERN_WARNING
++			"WARNING: \"rootwait=1\" is deprecated, "
++			"use \"rootwait\" instead.\n");
++
+ 	root_wait = 1;
+ 	return 1;
+ }
+diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
+index f7844f6..6631586 100755
+--- a/scripts/checkstack.pl
++++ b/scripts/checkstack.pl
+@@ -12,6 +12,7 @@
+ #	sh64 port by Paul Mundt
+ #	Random bits by Matt Mackall <mpm@selenic.com>
+ #	M68k port by Geert Uytterhoeven and Andreas Schwab
++#	AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
+ #
+ #	Usage:
+ #	objdump -d vmlinux | stackcheck.pl [arch]
+@@ -37,6 +38,10 @@ my (@stack, $re, $x, $xs);
+ 	if ($arch eq 'arm') {
+ 		#c0008ffc:	e24dd064	sub	sp, sp, #100	; 0x64
+ 		$re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
++	} elsif ($arch eq 'avr32') {
++		#8000008a:       20 1d           sub sp,4
++		#80000ca8:       fa cd 05 b0     sub sp,sp,1456
++		$re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
+ 	} elsif ($arch =~ /^i[3456]86$/) {
+ 		#c0105234:       81 ec ac 05 00 00       sub    $0x5ac,%esp
+ 		$re = qr/^.*[as][du][db]    \$(0x$x{1,8}),\%esp$/o;
+diff --git a/sound/Kconfig b/sound/Kconfig
+index e48b9b3..29a9979 100644
+--- a/sound/Kconfig
++++ b/sound/Kconfig
+@@ -63,6 +63,12 @@ source "sound/aoa/Kconfig"
+ 
+ source "sound/arm/Kconfig"
+ 
++source "sound/avr32/Kconfig"
++
++if SPI
++source "sound/spi/Kconfig"
++endif
++
+ source "sound/mips/Kconfig"
+ 
+ source "sound/sh/Kconfig"
+diff --git a/sound/Makefile b/sound/Makefile
+index 3ead922..e655df7 100644
+--- a/sound/Makefile
++++ b/sound/Makefile
+@@ -5,7 +5,8 @@ obj-$(CONFIG_SOUND) += soundcore.o
+ obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o
+ obj-$(CONFIG_SOUND_PRIME) += oss/
+ obj-$(CONFIG_DMASOUND) += oss/
+-obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/ soc/
++obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ avr32/ sh/ synth/ usb/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/
++
+ obj-$(CONFIG_SND_AOA) += aoa/
+ 
+ # This one must be compilable even if sound is configured out
+diff --git a/sound/avr32/Kconfig b/sound/avr32/Kconfig
+new file mode 100644
+index 0000000..17d1d91
+--- /dev/null
++++ b/sound/avr32/Kconfig
+@@ -0,0 +1,11 @@
++menu "AVR32 devices"
++	depends on SND != n && AVR32
++
++config SND_ATMEL_AC97
++	tristate "Atmel AC97 Controller Driver"
++	select SND_PCM
++	select SND_AC97_CODEC
++	help
++	  ALSA sound driver for the Atmel AC97 controller.
++
++endmenu
+diff --git a/sound/avr32/Makefile b/sound/avr32/Makefile
+new file mode 100644
+index 0000000..5d87d0e
+--- /dev/null
++++ b/sound/avr32/Makefile
+@@ -0,0 +1,3 @@
++snd-atmel-ac97-objs		:= ac97c.o
++
++obj-$(CONFIG_SND_ATMEL_AC97)	+= snd-atmel-ac97.o
+diff --git a/sound/avr32/ac97c.c b/sound/avr32/ac97c.c
+new file mode 100644
+index 0000000..0ec0b1c
+--- /dev/null
++++ b/sound/avr32/ac97c.c
+@@ -0,0 +1,914 @@
++/*
++ * Driver for the Atmel AC97 controller
++ *
++ * Copyright (C) 2005-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/mutex.h>
++#include <linux/io.h>
++
++#include <sound/driver.h>
++#include <sound/core.h>
++#include <sound/initval.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/ac97_codec.h>
++#include <sound/memalloc.h>
++
++#include <asm/dma-controller.h>
++
++#include "ac97c.h"
++
++/* Serialize access to opened */
++static DEFINE_MUTEX(opened_mutex);
++
++struct atmel_ac97_dma_info {
++	struct dma_request_cyclic req_tx;
++	struct dma_request_cyclic req_rx;
++	unsigned short rx_periph_id;
++	unsigned short tx_periph_id;
++};
++
++struct atmel_ac97 {
++	/* Serialize access to opened */
++	spinlock_t lock;
++	void __iomem *regs;
++	struct snd_pcm_substream *playback_substream;
++	struct snd_pcm_substream *capture_substream;
++	struct snd_card *card;
++	struct snd_pcm *pcm;
++	struct snd_ac97 *ac97;
++	struct snd_ac97_bus *ac97_bus;
++	int opened;
++	int period;
++	u64 cur_format;
++	unsigned int cur_rate;
++	struct clk *mck;
++	struct platform_device *pdev;
++	struct atmel_ac97_dma_info dma;
++};
++
++#define get_chip(card) ((struct atmel_ac97 *)(card)->private_data)
++
++#define ac97c_writel(chip, reg, val)			\
++	__raw_writel((val), (chip)->regs + AC97C_##reg)
++#define ac97c_readl(chip, reg)				\
++	__raw_readl((chip)->regs + AC97C_##reg)
++
++/*
++ * PCM part
++ */
++static struct snd_pcm_hardware snd_atmel_ac97_playback_hw = {
++	.info			= (SNDRV_PCM_INFO_INTERLEAVED
++				  | SNDRV_PCM_INFO_MMAP
++				  | SNDRV_PCM_INFO_MMAP_VALID
++				  | SNDRV_PCM_INFO_BLOCK_TRANSFER
++				  | SNDRV_PCM_INFO_JOINT_DUPLEX),
++	.formats		= (SNDRV_PCM_FMTBIT_S16_BE
++				  | SNDRV_PCM_FMTBIT_S16_LE),
++	.rates			= (SNDRV_PCM_RATE_CONTINUOUS),
++	.rate_min		= 4000,
++	.rate_max		= 48000,
++	.channels_min		= 1,
++	.channels_max		= 6,
++	.buffer_bytes_max	= 64*1024,
++	.period_bytes_min	= 512,
++	.period_bytes_max	= 4095,
++	.periods_min		= 8,
++	.periods_max		= 1024,
++};
++
++static struct snd_pcm_hardware snd_atmel_ac97_capture_hw = {
++	.info			= (SNDRV_PCM_INFO_INTERLEAVED
++				  | SNDRV_PCM_INFO_MMAP
++				  | SNDRV_PCM_INFO_MMAP_VALID
++				  | SNDRV_PCM_INFO_BLOCK_TRANSFER
++				  | SNDRV_PCM_INFO_JOINT_DUPLEX),
++	.formats		= (SNDRV_PCM_FMTBIT_S16_BE
++				  | SNDRV_PCM_FMTBIT_S16_LE),
++	.rates			= (SNDRV_PCM_RATE_CONTINUOUS),
++	.rate_min		= 4000,
++	.rate_max		= 48000,
++	.channels_min		= 1,
++	.channels_max		= 2,
++	.buffer_bytes_max	= 64*1024,
++	.period_bytes_min	= 512,
++	.period_bytes_max	= 4095,
++	.periods_min		= 8,
++	.periods_max		= 1024,
++};
++
++/*
++ * PCM functions
++ */
++static int
++snd_atmel_ac97_playback_open(struct snd_pcm_substream *substream)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++
++	mutex_lock(&opened_mutex);
++	chip->opened++;
++	runtime->hw = snd_atmel_ac97_playback_hw;
++	if (chip->cur_rate) {
++		runtime->hw.rate_min = chip->cur_rate;
++		runtime->hw.rate_max = chip->cur_rate;
++	}
++	if (chip->cur_format)
++		runtime->hw.formats = (1ULL << chip->cur_format);
++	mutex_unlock(&opened_mutex);
++	chip->playback_substream = substream;
++	chip->period = 0;
++	return 0;
++}
++
++static int
++snd_atmel_ac97_capture_open(struct snd_pcm_substream *substream)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++
++	mutex_lock(&opened_mutex);
++	chip->opened++;
++	runtime->hw = snd_atmel_ac97_capture_hw;
++	if (chip->cur_rate) {
++		runtime->hw.rate_min = chip->cur_rate;
++		runtime->hw.rate_max = chip->cur_rate;
++	}
++	if (chip->cur_format)
++		runtime->hw.formats = (1ULL << chip->cur_format);
++	mutex_unlock(&opened_mutex);
++	chip->capture_substream = substream;
++	chip->period = 0;
++	return 0;
++}
++
++static int snd_atmel_ac97_playback_close(struct snd_pcm_substream *substream)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	mutex_lock(&opened_mutex);
++	chip->opened--;
++	if (!chip->opened) {
++		chip->cur_rate = 0;
++		chip->cur_format = 0;
++	}
++	mutex_unlock(&opened_mutex);
++	return 0;
++}
++
++static int snd_atmel_ac97_capture_close(struct snd_pcm_substream *substream)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	mutex_lock(&opened_mutex);
++	chip->opened--;
++	if (!chip->opened) {
++		chip->cur_rate = 0;
++		chip->cur_format = 0;
++	}
++	mutex_unlock(&opened_mutex);
++	return 0;
++}
++
++static int
++snd_atmel_ac97_playback_hw_params(struct snd_pcm_substream *substream,
++		struct snd_pcm_hw_params *hw_params)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	int err;
++
++	err = snd_pcm_lib_malloc_pages(substream,
++					params_buffer_bytes(hw_params));
++	if (err < 0)
++		return err;
++
++	/* Set restrictions to params */
++	mutex_lock(&opened_mutex);
++	chip->cur_rate = params_rate(hw_params);
++	chip->cur_format = params_format(hw_params);
++	mutex_unlock(&opened_mutex);
++
++	return 0;
++}
++
++static int
++snd_atmel_ac97_capture_hw_params(struct snd_pcm_substream *substream,
++		struct snd_pcm_hw_params *hw_params)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	int err;
++
++	err = snd_pcm_lib_malloc_pages(substream,
++					params_buffer_bytes(hw_params));
++	if (err < 0)
++		return err;
++
++	/* Set restrictions to params */
++	mutex_lock(&opened_mutex);
++	chip->cur_rate = params_rate(hw_params);
++	chip->cur_format = params_format(hw_params);
++	mutex_unlock(&opened_mutex);
++
++	return 0;
++}
++
++static int snd_atmel_ac97_playback_hw_free(struct snd_pcm_substream *substream)
++{
++	return snd_pcm_lib_free_pages(substream);
++}
++
++static int snd_atmel_ac97_capture_hw_free(struct snd_pcm_substream *substream)
++{
++
++	return snd_pcm_lib_free_pages(substream);
++}
++
++static int snd_atmel_ac97_playback_prepare(struct snd_pcm_substream *substream)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	struct platform_device *pdev = chip->pdev;
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	int block_size = frames_to_bytes(runtime, runtime->period_size);
++	unsigned long word = 0;
++	unsigned long buffer_size = 0;
++
++	dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
++			block_size * 2, DMA_TO_DEVICE);
++
++	/* Assign slots to channels */
++	switch (substream->runtime->channels) {
++	case 1:
++		word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
++		break;
++	case 2:
++		/* Assign Left and Right slot to Channel A */
++		word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
++			| AC97C_CH_ASSIGN(PCM_RIGHT, A);
++		break;
++	default:
++		/* TODO: support more than two channels */
++		return -EINVAL;
++		break;
++	}
++	ac97c_writel(chip, OCA, word);
++
++	/* Configure sample format and size */
++	word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
++
++	switch (runtime->format) {
++	case SNDRV_PCM_FORMAT_S16_LE:
++		word |= AC97C_CMR_CEM_LITTLE;
++		break;
++	case SNDRV_PCM_FORMAT_S16_BE: /* fall through */
++	default:
++		word &= ~AC97C_CMR_CEM_LITTLE;
++		break;
++	}
++
++	ac97c_writel(chip, CAMR, word);
++
++	/* Set variable rate if needed */
++	if (runtime->rate != 48000) {
++		word = ac97c_readl(chip, MR);
++		word |= AC97C_MR_VRA;
++		ac97c_writel(chip, MR, word);
++	} else {
++		/* Clear Variable Rate Bit */
++		word = ac97c_readl(chip, MR);
++		word &= ~AC97C_MR_VRA;
++		ac97c_writel(chip, MR, word);
++	}
++
++	/* Set rate */
++	snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
++
++	buffer_size = frames_to_bytes(runtime, runtime->period_size) *
++		runtime->periods;
++
++	chip->dma.req_tx.buffer_size = buffer_size;
++	chip->dma.req_tx.periods = runtime->periods;
++
++	BUG_ON(chip->dma.req_tx.buffer_size !=
++			(chip->dma.req_tx.periods *
++			 frames_to_bytes(runtime, runtime->period_size)));
++
++	chip->dma.req_tx.buffer_start = runtime->dma_addr;
++	chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
++	chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
++	chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
++	chip->dma.req_tx.width = DMA_WIDTH_16BIT;
++	chip->dma.req_tx.dev_id = chip;
++
++	return 0;
++}
++
++static int snd_atmel_ac97_capture_prepare(struct snd_pcm_substream *substream)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	struct platform_device *pdev = chip->pdev;
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	int block_size = frames_to_bytes(runtime, runtime->period_size);
++	unsigned long word = 0;
++	unsigned long buffer_size = 0;
++
++	dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
++			block_size * 2, DMA_FROM_DEVICE);
++
++	/* Assign slots to channels */
++	switch (substream->runtime->channels) {
++	case 1:
++		word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
++		break;
++	case 2:
++		/* Assign Left and Right slot to Channel A */
++		word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
++			| AC97C_CH_ASSIGN(PCM_RIGHT, A);
++		break;
++	default:
++		/* TODO: support more than two channels */
++		return -EINVAL;
++		break;
++	}
++	ac97c_writel(chip, ICA, word);
++
++	/* Configure sample format and size */
++	word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
++
++	switch (runtime->format) {
++	case SNDRV_PCM_FORMAT_S16_LE:
++		word |= AC97C_CMR_CEM_LITTLE;
++		break;
++	case SNDRV_PCM_FORMAT_S16_BE:
++	default:
++		word &= ~(AC97C_CMR_CEM_LITTLE);
++		break;
++	}
++
++	ac97c_writel(chip, CAMR, word);
++
++	/* Set variable rate if needed */
++	if (runtime->rate != 48000) {
++		word = ac97c_readl(chip, MR);
++		word |= AC97C_MR_VRA;
++		ac97c_writel(chip, MR, word);
++	} else {
++		/* Clear Variable Rate Bit */
++		word = ac97c_readl(chip, MR);
++		word &= ~(AC97C_MR_VRA);
++		ac97c_writel(chip, MR, word);
++	}
++
++	/* Set rate */
++	snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
++
++	buffer_size = frames_to_bytes(runtime, runtime->period_size) *
++		runtime->periods;
++
++	chip->dma.req_rx.buffer_size = buffer_size;
++	chip->dma.req_rx.periods = runtime->periods;
++
++	BUG_ON(chip->dma.req_rx.buffer_size !=
++			(chip->dma.req_rx.periods *
++			 frames_to_bytes(runtime, runtime->period_size)));
++
++	chip->dma.req_rx.buffer_start = runtime->dma_addr;
++	chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
++	chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
++	chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
++	chip->dma.req_rx.width = DMA_WIDTH_16BIT;
++	chip->dma.req_rx.dev_id = chip;
++
++	return 0;
++}
++
++	static int
++snd_atmel_ac97_playback_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	unsigned long camr;
++	int flags, err = 0;
++
++	spin_lock_irqsave(&chip->lock, flags);
++	camr = ac97c_readl(chip, CAMR);
++
++	switch (cmd) {
++	case SNDRV_PCM_TRIGGER_START:
++		err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
++				&chip->dma.req_tx);
++		dma_start_request(chip->dma.req_tx.req.dmac,
++				chip->dma.req_tx.req.channel);
++		camr |= AC97C_CMR_CENA;
++		break;
++	case SNDRV_PCM_TRIGGER_STOP:
++		err = dma_stop_request(chip->dma.req_tx.req.dmac,
++				chip->dma.req_tx.req.channel);
++		if (chip->opened <= 1)
++			camr &= ~AC97C_CMR_CENA;
++		break;
++	default:
++		err = -EINVAL;
++		break;
++	}
++
++	ac97c_writel(chip, CAMR, camr);
++
++	spin_unlock_irqrestore(&chip->lock, flags);
++	return err;
++}
++
++	static int
++snd_atmel_ac97_capture_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	unsigned long camr;
++	int flags, err = 0;
++
++	spin_lock_irqsave(&chip->lock, flags);
++	camr = ac97c_readl(chip, CAMR);
++
++	switch (cmd) {
++	case SNDRV_PCM_TRIGGER_START:
++		err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
++				&chip->dma.req_rx);
++		dma_start_request(chip->dma.req_rx.req.dmac,
++				chip->dma.req_rx.req.channel);
++		camr |= AC97C_CMR_CENA;
++		break;
++	case SNDRV_PCM_TRIGGER_STOP:
++		err = dma_stop_request(chip->dma.req_rx.req.dmac,
++				chip->dma.req_rx.req.channel);
++		mutex_lock(&opened_mutex);
++		if (chip->opened <= 1)
++			camr &= ~AC97C_CMR_CENA;
++		mutex_unlock(&opened_mutex);
++		break;
++	default:
++		err = -EINVAL;
++		break;
++	}
++
++	ac97c_writel(chip, CAMR, camr);
++
++	spin_unlock_irqrestore(&chip->lock, flags);
++	return err;
++}
++
++	static snd_pcm_uframes_t
++snd_atmel_ac97_playback_pointer(struct snd_pcm_substream *substream)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	snd_pcm_uframes_t pos;
++	unsigned long bytes;
++
++	bytes = (dma_get_current_pos
++			(chip->dma.req_tx.req.dmac,
++			 chip->dma.req_tx.req.channel) - runtime->dma_addr);
++	pos = bytes_to_frames(runtime, bytes);
++	if (pos >= runtime->buffer_size)
++		pos -= runtime->buffer_size;
++
++	return pos;
++}
++
++	static snd_pcm_uframes_t
++snd_atmel_ac97_capture_pointer(struct snd_pcm_substream *substream)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	snd_pcm_uframes_t pos;
++	unsigned long bytes;
++
++	bytes = (dma_get_current_pos
++			(chip->dma.req_rx.req.dmac,
++			 chip->dma.req_rx.req.channel)
++			- runtime->dma_addr);
++	pos = bytes_to_frames(runtime, bytes);
++	if (pos >= runtime->buffer_size)
++		pos -= runtime->buffer_size;
++
++
++	return pos;
++}
++
++static struct snd_pcm_ops atmel_ac97_playback_ops = {
++	.open		= snd_atmel_ac97_playback_open,
++	.close		= snd_atmel_ac97_playback_close,
++	.ioctl		= snd_pcm_lib_ioctl,
++	.hw_params	= snd_atmel_ac97_playback_hw_params,
++	.hw_free	= snd_atmel_ac97_playback_hw_free,
++	.prepare	= snd_atmel_ac97_playback_prepare,
++	.trigger	= snd_atmel_ac97_playback_trigger,
++	.pointer	= snd_atmel_ac97_playback_pointer,
++};
++
++static struct snd_pcm_ops atmel_ac97_capture_ops = {
++	.open		= snd_atmel_ac97_capture_open,
++	.close		= snd_atmel_ac97_capture_close,
++	.ioctl		= snd_pcm_lib_ioctl,
++	.hw_params	= snd_atmel_ac97_capture_hw_params,
++	.hw_free	= snd_atmel_ac97_capture_hw_free,
++	.prepare	= snd_atmel_ac97_capture_prepare,
++	.trigger	= snd_atmel_ac97_capture_trigger,
++	.pointer	= snd_atmel_ac97_capture_pointer,
++};
++
++static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
++	/* Playback */
++	{
++		.exclusive = 1,
++		.r = { {
++			.slots = ((1 << AC97_SLOT_PCM_LEFT)
++					| (1 << AC97_SLOT_PCM_RIGHT)
++					| (1 << AC97_SLOT_PCM_CENTER)
++					| (1 << AC97_SLOT_PCM_SLEFT)
++					| (1 << AC97_SLOT_PCM_SRIGHT)
++					| (1 << AC97_SLOT_LFE)),
++		} }
++	},
++	/* PCM in */
++	{
++		.stream = 1,
++		.exclusive = 1,
++		.r = { {
++			.slots = ((1 << AC97_SLOT_PCM_LEFT)
++					| (1 << AC97_SLOT_PCM_RIGHT)),
++		} }
++	},
++	/* Mic in */
++	{
++		.stream = 1,
++		.exclusive = 1,
++		.r = { {
++			.slots = (1<<AC97_SLOT_MIC),
++		} }
++	},
++};
++
++static int __devinit snd_atmel_ac97_pcm_new(struct atmel_ac97 *chip)
++{
++	struct snd_pcm *pcm;
++	int err;
++
++	err = snd_ac97_pcm_assign(chip->ac97_bus,
++			ARRAY_SIZE(atmel_ac97_pcm_defs),
++			atmel_ac97_pcm_defs);
++	if (err)
++		return err;
++
++	err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
++	if (err)
++		return err;
++
++	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
++			&atmel_ac97_playback_ops);
++
++	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
++			&atmel_ac97_capture_ops);
++
++	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
++			&chip->pdev->dev,
++			128 * 1024, 128 * 1024);
++
++	pcm->private_data = chip;
++	pcm->info_flags = 0;
++	strcpy(pcm->name, "Atmel-AC97");
++	chip->pcm = pcm;
++
++	return 0;
++}
++
++/*
++ * Mixer part.
++ */
++static int snd_atmel_ac97_mixer_new(struct atmel_ac97 *chip)
++{
++	int err;
++	struct snd_ac97_template template;
++
++	memset(&template, 0, sizeof(template));
++	template.private_data = chip;
++	err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
++
++	return err;
++}
++
++static void atmel_ac97_error(struct dma_request *_req)
++{
++	struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
++	struct atmel_ac97 *chip = req->dev_id;
++
++	dev_dbg(&chip->pdev->dev, "DMA Controller error, channel %d\n",
++			req->req.channel);
++}
++
++static void atmel_ac97_block_complete(struct dma_request *_req)
++{
++	struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
++	struct atmel_ac97 *chip = req->dev_id;
++	if (req->periph_id == chip->dma.tx_periph_id)
++		snd_pcm_period_elapsed(chip->playback_substream);
++	else
++		snd_pcm_period_elapsed(chip->capture_substream);
++}
++
++/*
++ * Codec part.
++ */
++static void snd_atmel_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
++		unsigned short val)
++{
++	struct atmel_ac97 *chip = get_chip(ac97);
++	unsigned long word;
++	int timeout = 40;
++
++	word = (reg & 0x7f) << 16 | val;
++
++	do {
++		if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
++			ac97c_writel(chip, COTHR, word);
++			return;
++		}
++		udelay(1);
++	} while (--timeout);
++
++	dev_dbg(&chip->pdev->dev, "codec write timeout\n");
++}
++
++static unsigned short snd_atmel_ac97_read(struct snd_ac97 *ac97,
++		unsigned short reg)
++{
++	struct atmel_ac97 *chip = get_chip(ac97);
++	unsigned long word;
++	int timeout = 40;
++	int write = 10;
++
++	word = (0x80 | (reg & 0x7f)) << 16;
++
++	if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
++		ac97c_readl(chip, CORHR);
++
++retry_write:
++	timeout = 40;
++
++	do {
++		if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
++			ac97c_writel(chip, COTHR, word);
++			goto read_reg;
++		}
++		mdelay(10);
++	} while (--timeout);
++
++	if (!--write)
++		goto timed_out;
++	goto retry_write;
++
++read_reg:
++	do {
++		if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0) {
++			unsigned short val = ac97c_readl(chip, CORHR);
++			return val;
++		}
++		mdelay(10);
++	} while (--timeout);
++
++	if (!--write)
++		goto timed_out;
++	goto retry_write;
++
++timed_out:
++	dev_dbg(&chip->pdev->dev, "codec read timeout\n");
++	return 0xffff;
++}
++
++static void snd_atmel_ac97_reset(struct atmel_ac97 *chip)
++{
++	ac97c_writel(chip, MR, AC97C_MR_WRST);
++	mdelay(1);
++	ac97c_writel(chip, MR, AC97C_MR_ENA);
++}
++
++static void snd_atmel_ac97_destroy(struct snd_card *card)
++{
++	struct atmel_ac97 *chip = get_chip(card);
++
++	if (chip->regs)
++		iounmap(chip->regs);
++
++	if (chip->mck) {
++		clk_disable(chip->mck);
++		clk_put(chip->mck);
++	}
++
++	if (chip->dma.req_tx.req.dmac) {
++		dma_release_channel(chip->dma.req_tx.req.dmac,
++				chip->dma.req_tx.req.channel);
++	}
++	if (chip->dma.req_rx.req.dmac) {
++		dma_release_channel(chip->dma.req_rx.req.dmac,
++				chip->dma.req_rx.req.channel);
++	}
++}
++
++static int __devinit snd_atmel_ac97_create(struct snd_card *card,
++		struct platform_device *pdev)
++{
++	static struct snd_ac97_bus_ops ops = {
++		.write	= snd_atmel_ac97_write,
++		.read	= snd_atmel_ac97_read,
++	};
++	struct atmel_ac97 *chip = get_chip(card);
++	struct resource *regs;
++	struct clk *mck;
++	int err;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs)
++		return -ENXIO;
++
++	mck = clk_get(&pdev->dev, "pclk");
++	if (IS_ERR(mck))
++		return PTR_ERR(mck);
++	clk_enable(mck);
++	chip->mck = mck;
++
++	card->private_free = snd_atmel_ac97_destroy;
++
++	spin_lock_init(&chip->lock);
++	chip->card = card;
++	chip->pdev = pdev;
++
++	chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!chip->regs)
++		return -ENOMEM;
++
++	snd_card_set_dev(card, &pdev->dev);
++
++	err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
++
++	return err;
++}
++
++static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
++{
++	static int dev;
++	struct snd_card *card;
++	struct atmel_ac97 *chip;
++	int err;
++	int ch;
++
++	mutex_init(&opened_mutex);
++
++	err = -ENOMEM;
++	card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
++			THIS_MODULE, sizeof(struct atmel_ac97));
++	if (!card)
++		goto out;
++	chip = get_chip(card);
++
++	err = snd_atmel_ac97_create(card, pdev);
++	if (err)
++		goto out_free_card;
++
++	snd_atmel_ac97_reset(chip);
++
++	err = snd_atmel_ac97_mixer_new(chip);
++	if (err)
++		goto out_free_card;
++
++	err = snd_atmel_ac97_pcm_new(chip);
++	if (err)
++		goto out_free_card;
++
++	/* TODO: Get this information from the platform device */
++	chip->dma.req_tx.req.dmac = find_dma_controller(0);
++	if (!chip->dma.req_tx.req.dmac) {
++		dev_dbg(&chip->pdev->dev, "DMA controller for TX missing\n");
++		err = -ENODEV;
++		goto out_free_card;
++	}
++	chip->dma.req_rx.req.dmac = find_dma_controller(0);
++	if (!chip->dma.req_rx.req.dmac) {
++		dev_dbg(&chip->pdev->dev, "DMA controller for RX missing\n");
++		err = -ENODEV;
++		goto out_free_card;
++	}
++
++	chip->dma.rx_periph_id = 3;
++	chip->dma.tx_periph_id = 4;
++
++	ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
++	if (ch < 0) {
++		dev_dbg(&chip->pdev->dev,
++				"could not allocate TX DMA channel\n");
++		err = ch;
++		goto out_free_card;
++	}
++	chip->dma.req_tx.req.channel = ch;
++	chip->dma.req_tx.width = DMA_WIDTH_16BIT;
++	chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
++	chip->dma.req_tx.req.error = atmel_ac97_error;
++
++	ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
++	if (ch < 0) {
++		dev_dbg(&chip->pdev->dev,
++				"could not allocate RX DMA channel\n");
++		err = ch;
++		goto out_free_card;
++	}
++	chip->dma.req_rx.req.channel = ch;
++	chip->dma.req_rx.width = DMA_WIDTH_16BIT;
++	chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
++	chip->dma.req_rx.req.error = atmel_ac97_error;
++
++	strcpy(card->driver, "atmel_ac97c");
++	strcpy(card->shortname, "atmel_ac97c");
++	sprintf(card->longname, "Atmel AVR32 AC97 controller");
++
++	err = snd_card_register(card);
++	if (err)
++		goto out_free_card;
++
++	platform_set_drvdata(pdev, card);
++	dev++;
++
++	dev_info(&pdev->dev, "Atmel AVR32 AC97 controller at 0x%p\n",
++			chip->regs);
++
++	return 0;
++
++out_free_card:
++	snd_card_free(card);
++out:
++	return err;
++}
++
++#ifdef CONFIG_PM
++	static int
++snd_atmel_ac97_suspend(struct platform_device *pdev, pm_message_t msg)
++{
++	struct snd_card *card = platform_get_drvdata(pdev);
++	struct atmel_ac97 *chip = card->private_data;
++
++	clk_disable(chip->mck);
++
++	return 0;
++}
++
++static int snd_atmel_ac97_resume(struct platform_device *pdev)
++{
++	struct snd_card *card = dev_get_drvdata(pdev);
++	struct atmel_ac97 *chip = card->private_data;
++
++	clk_enable(chip->mck);
++
++	return 0;
++}
++#else
++#define snd_atmel_ac97_suspend NULL
++#define snd_atmel_ac97_resume NULL
++#endif
++
++static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
++{
++	struct snd_card *card = platform_get_drvdata(pdev);
++
++	snd_card_free(card);
++	platform_set_drvdata(pdev, NULL);
++	return 0;
++}
++
++static struct platform_driver atmel_ac97_driver = {
++	.remove		= __devexit_p(snd_atmel_ac97_remove),
++	.driver		= {
++		.name	= "atmel_ac97c",
++	},
++	.suspend	= snd_atmel_ac97_suspend,
++	.resume		= snd_atmel_ac97_resume,
++};
++
++static int __init atmel_ac97_init(void)
++{
++	return platform_driver_probe(&atmel_ac97_driver,
++			snd_atmel_ac97_probe);
++}
++module_init(atmel_ac97_init);
++
++static void __exit atmel_ac97_exit(void)
++{
++	platform_driver_unregister(&atmel_ac97_driver);
++}
++module_exit(atmel_ac97_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+diff --git a/sound/avr32/ac97c.h b/sound/avr32/ac97c.h
+new file mode 100644
+index 0000000..96246e7
+--- /dev/null
++++ b/sound/avr32/ac97c.h
+@@ -0,0 +1,71 @@
++/*
++ * Register definitions for the Atmel AC97 Controller.
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __SOUND_AVR32_AC97C_H
++#define __SOUND_AVR32_AC97C_H
++
++#define AC97C_MR		0x08
++#define AC97C_ICA		0x10
++#define AC97C_OCA		0x14
++#define AC97C_CARHR		0x20
++#define AC97C_CATHR		0x24
++#define AC97C_CASR		0x28
++#define AC97C_CAMR		0x2c
++#define AC97C_CBRHR		0x30
++#define AC97C_CBTHR		0x34
++#define AC97C_CBSR		0x38
++#define AC97C_CBMR		0x3c
++#define AC97C_CORHR		0x40
++#define AC97C_COTHR		0x44
++#define AC97C_COSR		0x48
++#define AC97C_COMR		0x4c
++#define AC97C_SR		0x50
++#define AC97C_IER		0x54
++#define AC97C_IDR		0x58
++#define AC97C_IMR		0x5c
++#define AC97C_VERSION		0xfc
++
++#define AC97C_CATPR		PDC_TPR
++#define AC97C_CATCR		PDC_TCR
++#define AC97C_CATNPR		PDC_TNPR
++#define AC97C_CATNCR		PDC_TNCR
++#define AC97C_CARPR		PDC_RPR
++#define AC97C_CARCR		PDC_RCR
++#define AC97C_CARNPR		PDC_RNPR
++#define AC97C_CARNCR		PDC_RNCR
++#define AC97C_PTCR		PDC_PTCR
++
++#define AC97C_MR_ENA		(1 << 0)
++#define AC97C_MR_WRST		(1 << 1)
++#define AC97C_MR_VRA		(1 << 2)
++
++#define AC97C_CSR_TXRDY		(1 << 0)
++#define AC97C_CSR_UNRUN		(1 << 2)
++#define AC97C_CSR_RXRDY		(1 << 4)
++#define AC97C_CSR_ENDTX		(1 << 10)
++#define AC97C_CSR_ENDRX		(1 << 14)
++
++#define AC97C_CMR_SIZE_20	(0 << 16)
++#define AC97C_CMR_SIZE_18	(1 << 16)
++#define AC97C_CMR_SIZE_16	(2 << 16)
++#define AC97C_CMR_SIZE_10	(3 << 16)
++#define AC97C_CMR_CEM_LITTLE	(1 << 18)
++#define AC97C_CMR_CEM_BIG	(0 << 18)
++#define AC97C_CMR_CENA		(1 << 21)
++#define AC97C_CMR_PDCEN		(1 << 22)
++
++#define AC97C_SR_CAEVT		(1 << 3)
++
++#define AC97C_CH_ASSIGN(slot, channel)					\
++	(AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
++#define AC97C_CHANNEL_NONE	0x0
++#define AC97C_CHANNEL_A		0x1
++#define AC97C_CHANNEL_B		0x2
++
++#endif /* __SOUND_AVR32_AC97C_H */
+diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
+index af37cd0..e3cc557 100644
+--- a/sound/oss/Kconfig
++++ b/sound/oss/Kconfig
+@@ -654,3 +654,7 @@ config SOUND_SH_DAC_AUDIO_CHANNEL
+ 	int "DAC channel"
+ 	default "1"
+ 	depends on SOUND_SH_DAC_AUDIO
++
++config SOUND_AT32_ABDAC
++	tristate "Atmel AT32 Audio Bitstream DAC (ABDAC) support"
++	depends on SOUND_PRIME && AVR32
+diff --git a/sound/oss/Makefile b/sound/oss/Makefile
+index 1200670..fafc246 100644
+--- a/sound/oss/Makefile
++++ b/sound/oss/Makefile
+@@ -10,6 +10,7 @@ obj-$(CONFIG_SOUND_CS4232)	+= cs4232.o ad1848.o
+ 
+ # Please leave it as is, cause the link order is significant !
+ 
++obj-$(CONFIG_SOUND_AT32_ABDAC)	+= at32_abdac.o
+ obj-$(CONFIG_SOUND_SH_DAC_AUDIO)	+= sh_dac_audio.o
+ obj-$(CONFIG_SOUND_HAL2)	+= hal2.o
+ obj-$(CONFIG_SOUND_AEDSP16)	+= aedsp16.o
+diff --git a/sound/oss/at32_abdac.c b/sound/oss/at32_abdac.c
+new file mode 100644
+index 0000000..cb997d7
+--- /dev/null
++++ b/sound/oss/at32_abdac.c
+@@ -0,0 +1,722 @@
++/*
++ * OSS Sound Driver for the Atmel AT32 on-chip DAC.
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/dma-mapping.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/sound.h>
++#include <linux/soundcard.h>
++
++#include <asm/byteorder.h>
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
++
++/* We want to use the "bizarre" swap-bytes-in-each-halfword macro */
++#include <linux/byteorder/swabb.h>
++
++#include "at32_abdac.h"
++
++#define DMA_BUFFER_SIZE	32768
++#define DMA_PERIOD_SHIFT 10
++#define DMA_PERIOD_SIZE (1 << DMA_PERIOD_SHIFT)
++#define DMA_WRITE_THRESHOLD DMA_PERIOD_SIZE
++
++struct sound_settings {
++	unsigned int format;
++	unsigned int channels;
++	unsigned int sample_rate;
++	/* log2(bytes per sample) */
++	unsigned int input_order;
++};
++
++struct at32_dac {
++	spinlock_t lock;
++	void __iomem *regs;
++
++	/* head and tail refer to number of words */
++	struct {
++		u32 *buf;
++		int head;
++		int tail;
++	} dma;
++
++	struct semaphore sem;
++	wait_queue_head_t write_wait;
++
++	/*
++	 * Read at most ucount bytes from ubuf, translate to 2-channel
++	 * signed 16-bit big endian format and write to the DMA buffer
++	 * as long as there is room left.  Return the number of bytes
++	 * successfully copied from ubuf, or -EFAULT if the first
++	 * sample from ubuf couldn't be read.  This function is not
++	 * called unless there is room for at least one sample (4
++	 * bytes) in the DMA buffer.
++	 */
++	ssize_t (*trans)(struct at32_dac *dac, const char __user *ubuf,
++			 size_t ucount);
++
++	struct sound_settings dsp_settings;
++	struct dma_request_cyclic req;
++
++	struct clk *mck;
++	struct clk *sample_clk;
++	struct platform_device *pdev;
++	int busy;
++	int playing;
++	int dev_dsp;
++};
++static struct at32_dac *the_dac;
++
++static inline unsigned int abdac_get_head(struct at32_dac *dac)
++{
++	return dac->dma.head & ((DMA_BUFFER_SIZE / 4) - 1);
++}
++
++static inline unsigned int abdac_get_tail(struct at32_dac *dac)
++{
++	return dac->dma.tail & ((DMA_BUFFER_SIZE / 4) - 1);
++}
++
++static inline unsigned int abdac_dma_space(struct at32_dac *dac)
++{
++	unsigned int space;
++
++	space = ((dac->dma.tail - dac->dma.head - 1)
++		 & ((DMA_BUFFER_SIZE / 4) - 1));
++	return space;
++}
++
++static void abdac_update_dma_tail(struct at32_dac *dac)
++{
++	dma_addr_t dma_addr;
++	unsigned int new_tail;
++
++	if (dac->playing) {
++		dma_addr = dma_get_current_pos(dac->req.req.dmac,
++					       dac->req.req.channel);
++		new_tail = (dma_addr - dac->req.buffer_start) / 4;
++		if (new_tail >= dac->dma.head
++		    && (dac->dma.tail < dac->dma.head
++			|| dac->dma.tail > new_tail))
++			dev_notice(&dac->pdev->dev, "DMA underrun detected!\n");
++		dac->dma.tail = new_tail;
++		dev_dbg(&dac->pdev->dev, "update tail: 0x%x - 0x%x = %u\n",
++			dma_addr, dac->req.buffer_start, dac->dma.tail);
++	}
++}
++
++static int abdac_start(struct at32_dac *dac)
++{
++	int ret;
++
++	if (dac->playing)
++		return 0;
++
++	memset(dac->dma.buf, 0, DMA_BUFFER_SIZE);
++
++	clk_enable(dac->sample_clk);
++
++	ret = dma_prepare_request_cyclic(dac->req.req.dmac, &dac->req);
++	if (ret)
++		goto out_stop_clock;
++
++	dev_dbg(&dac->pdev->dev, "starting DMA...\n");
++	ret = dma_start_request(dac->req.req.dmac, dac->req.req.channel);
++	if (ret)
++		goto out_stop_request;
++
++	dac_writel(dac, CTRL, DAC_BIT(EN));
++	dac->playing = 1;
++
++	return 0;
++
++out_stop_request:
++	dma_stop_request(dac->req.req.dmac,
++			 dac->req.req.channel);
++out_stop_clock:
++	clk_disable(dac->sample_clk);
++	return ret;
++}
++
++static int abdac_stop(struct at32_dac *dac)
++{
++	if (dac->playing) {
++		dma_stop_request(dac->req.req.dmac, dac->req.req.channel);
++		dac_writel(dac, DATA, 0);
++		dac_writel(dac, CTRL, 0);
++		dac->playing = 0;
++		clk_disable(dac->sample_clk);
++	}
++
++	return 0;
++}
++
++static int abdac_dma_prepare(struct at32_dac *dac)
++{
++	dac->dma.buf = dma_alloc_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
++					  &dac->req.buffer_start, GFP_KERNEL);
++	if (!dac->dma.buf)
++		return -ENOMEM;
++
++	dac->dma.head = dac->dma.tail = 0;
++	dac->req.periods = DMA_BUFFER_SIZE / DMA_PERIOD_SIZE;
++	dac->req.buffer_size = DMA_BUFFER_SIZE;
++
++	return 0;
++}
++
++static void abdac_dma_cleanup(struct at32_dac *dac)
++{
++	if (dac->dma.buf)
++		dma_free_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
++				  dac->dma.buf, dac->req.buffer_start);
++	dac->dma.buf = NULL;
++}
++
++static void abdac_dma_block_complete(struct dma_request *req)
++{
++	struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
++	struct at32_dac *dac = container_of(creq, struct at32_dac, req);
++
++	wake_up(&dac->write_wait);
++}
++
++static void abdac_dma_error(struct dma_request *req)
++{
++	struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
++	struct at32_dac *dac = container_of(creq, struct at32_dac, req);
++
++	dev_err(&dac->pdev->dev, "DMA error\n");
++}
++
++static irqreturn_t abdac_interrupt(int irq, void *dev_id)
++{
++	struct at32_dac *dac = dev_id;
++	u32 status;
++
++	status = dac_readl(dac, INT_STATUS);
++	if (status & DAC_BIT(UNDERRUN)) {
++		dev_err(&dac->pdev->dev, "Underrun detected!\n");
++		dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN));
++	} else {
++		dev_err(&dac->pdev->dev, "Spurious interrupt (status=0x%x)\n",
++			status);
++		dac_writel(dac, INT_CLR, status);
++	}
++
++	return IRQ_HANDLED;
++}
++
++static ssize_t trans_s16be(struct at32_dac *dac, const char __user *ubuf,
++			   size_t ucount)
++{
++	ssize_t ret;
++
++	if (dac->dsp_settings.channels == 2) {
++		const u32 __user *up = (const u32 __user *)ubuf;
++		u32 sample;
++
++		for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
++			if (!abdac_dma_space(dac))
++				break;
++
++			if (unlikely(__get_user(sample, up++))) {
++				if (ret == 0)
++					ret = -EFAULT;
++				break;
++			}
++			dac->dma.buf[abdac_get_head(dac)] = sample;
++			dac->dma.head++;
++		}
++	} else {
++		const u16 __user *up = (const u16 __user *)ubuf;
++		u16 sample;
++
++		for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
++			if (!abdac_dma_space(dac))
++				break;
++
++			if (unlikely(__get_user(sample, up++))) {
++				if (ret == 0)
++					ret = -EFAULT;
++				break;
++			}
++			dac->dma.buf[abdac_get_head(dac)]
++				= (sample << 16) | sample;
++			dac->dma.head++;
++		}
++	}
++
++	return ret;
++}
++
++static ssize_t trans_s16le(struct at32_dac *dac, const char __user *ubuf,
++			   size_t ucount)
++{
++	ssize_t ret;
++
++	if (dac->dsp_settings.channels == 2) {
++		const u32 __user *up = (const u32 __user *)ubuf;
++		u32 sample;
++
++		for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
++			if (!abdac_dma_space(dac))
++				break;
++
++			if (unlikely(__get_user(sample, up++))) {
++				if (ret == 0)
++					ret = -EFAULT;
++				break;
++			}
++			/* Swap bytes in each halfword */
++			dac->dma.buf[abdac_get_head(dac)] = swahb32(sample);
++			dac->dma.head++;
++		}
++	} else {
++		const u16 __user *up = (const u16 __user *)ubuf;
++		u16 sample;
++
++		for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
++			if (!abdac_dma_space(dac))
++				break;
++
++			if (unlikely(__get_user(sample, up++))) {
++				if (ret == 0)
++					ret = -EFAULT;
++				break;
++			}
++			sample = swab16(sample);
++			dac->dma.buf[abdac_get_head(dac)]
++				= (sample << 16) | sample;
++			dac->dma.head++;
++		}
++	}
++
++	return ret;
++}
++
++static ssize_t abdac_dma_translate_from_user(struct at32_dac *dac,
++					       const char __user *buffer,
++					       size_t count)
++{
++	/* At least one buffer must be available at this point */
++	dev_dbg(&dac->pdev->dev, "copying %zu bytes from user...\n", count);
++
++	return dac->trans(dac, buffer, count);
++}
++
++static int abdac_set_format(struct at32_dac *dac, int format)
++{
++	unsigned int order;
++
++	switch (format) {
++	case AFMT_S16_BE:
++		order = 1;
++		dac->trans = trans_s16be;
++		break;
++	case AFMT_S16_LE:
++		order = 1;
++		dac->trans = trans_s16le;
++		break;
++	default:
++		dev_dbg(&dac->pdev->dev, "unsupported format: %d\n", format);
++		return -EINVAL;
++	}
++
++	if (dac->dsp_settings.channels == 2)
++		order++;
++
++	dac->dsp_settings.input_order = order;
++	dac->dsp_settings.format = format;
++	return 0;
++}
++
++static int abdac_set_sample_rate(struct at32_dac *dac, unsigned long rate)
++{
++	unsigned long new_rate;
++	int ret;
++
++	ret = clk_set_rate(dac->sample_clk, 256 * rate);
++	if (ret < 0)
++		return ret;
++
++	/* TODO: mplayer seems to have a problem with this */
++#if 0
++	new_rate = clk_get_rate(dac->sample_clk);
++	dac->dsp_settings.sample_rate = new_rate / 256;
++#else
++	dac->dsp_settings.sample_rate = rate;
++#endif
++
++	return 0;
++}
++
++static ssize_t abdac_dsp_write(struct file *file,
++				 const char __user *buffer,
++				 size_t count, loff_t *ppos)
++{
++	struct at32_dac *dac = file->private_data;
++	DECLARE_WAITQUEUE(wait, current);
++	unsigned int avail;
++	ssize_t copied;
++	ssize_t ret;
++
++	/* Avoid address space checking in the translation functions */
++	if (!access_ok(buffer, count, VERIFY_READ))
++		return -EFAULT;
++
++	down(&dac->sem);
++
++	if (!dac->dma.buf) {
++		ret = abdac_dma_prepare(dac);
++		if (ret)
++			goto out;
++	}
++
++	add_wait_queue(&dac->write_wait, &wait);
++	ret = 0;
++	while (count > 0) {
++		do {
++			abdac_update_dma_tail(dac);
++			avail = abdac_dma_space(dac);
++			set_current_state(TASK_INTERRUPTIBLE);
++			if (avail >= DMA_WRITE_THRESHOLD)
++				break;
++
++			if (file->f_flags & O_NONBLOCK) {
++				if (!ret)
++					ret = -EAGAIN;
++				goto out;
++			}
++
++			pr_debug("Going to wait (avail = %u, count = %zu)\n",
++				 avail, count);
++
++			up(&dac->sem);
++			schedule();
++			if (signal_pending(current)) {
++				if (!ret)
++					ret = -ERESTARTSYS;
++				goto out_nosem;
++			}
++			down(&dac->sem);
++		} while (1);
++
++		copied = abdac_dma_translate_from_user(dac, buffer, count);
++		if (copied < 0) {
++			if (!ret)
++				ret = -EFAULT;
++			goto out;
++		}
++
++		abdac_start(dac);
++
++		count -= copied;
++		ret += copied;
++	}
++
++out:
++	up(&dac->sem);
++out_nosem:
++	remove_wait_queue(&dac->write_wait, &wait);
++	set_current_state(TASK_RUNNING);
++	return ret;
++}
++
++static int abdac_dsp_ioctl(struct inode *inode, struct file *file,
++			     unsigned int cmd, unsigned long arg)
++{
++	struct at32_dac *dac = file->private_data;
++	int __user *up = (int __user *)arg;
++	struct audio_buf_info abinfo;
++	int val, ret;
++
++	switch (cmd) {
++	case OSS_GETVERSION:
++		return put_user(SOUND_VERSION, up);
++
++	case SNDCTL_DSP_SPEED:
++		if (get_user(val, up))
++			return -EFAULT;
++		if (val >= 0) {
++			abdac_stop(dac);
++			ret = abdac_set_sample_rate(dac, val);
++			if (ret)
++				return ret;
++		}
++		return put_user(dac->dsp_settings.sample_rate, up);
++
++	case SNDCTL_DSP_STEREO:
++		if (get_user(val, up))
++			return -EFAULT;
++		abdac_stop(dac);
++		if (val && dac->dsp_settings.channels == 1)
++			dac->dsp_settings.input_order++;
++		else if (!val && dac->dsp_settings.channels != 1)
++			dac->dsp_settings.input_order--;
++		dac->dsp_settings.channels = val ? 2 : 1;
++		return 0;
++
++	case SNDCTL_DSP_CHANNELS:
++		if (get_user(val, up))
++			return -EFAULT;
++
++		if (val) {
++			if (val < 0 || val > 2)
++				return -EINVAL;
++
++			abdac_stop(dac);
++			dac->dsp_settings.input_order
++				+= val - dac->dsp_settings.channels;
++			dac->dsp_settings.channels = val;
++		}
++		return put_user(val, (int *)arg);
++
++	case SNDCTL_DSP_GETFMTS:
++		return put_user(AFMT_S16_BE | AFMT_S16_BE, up);
++
++	case SNDCTL_DSP_SETFMT:
++		if (get_user(val, up))
++			return -EFAULT;
++
++		if (val == AFMT_QUERY) {
++			val = dac->dsp_settings.format;
++		} else {
++			ret = abdac_set_format(dac, val);
++			if (ret)
++				return ret;
++		}
++		return put_user(val, up);
++
++	case SNDCTL_DSP_GETOSPACE:
++		abdac_update_dma_tail(dac);
++		abinfo.fragsize = ((1 << dac->dsp_settings.input_order)
++				   * (DMA_PERIOD_SIZE / 4));
++		abinfo.bytes = (abdac_dma_space(dac)
++				<< dac->dsp_settings.input_order);
++		abinfo.fragstotal = ((DMA_BUFFER_SIZE * 4)
++				     >> (DMA_PERIOD_SHIFT
++					 + dac->dsp_settings.input_order));
++		abinfo.fragments = ((abinfo.bytes
++				     >> dac->dsp_settings.input_order)
++				    / (DMA_PERIOD_SIZE / 4));
++		pr_debug("fragments=%d  fragstotal=%d  fragsize=%d bytes=%d\n",
++			 abinfo.fragments, abinfo.fragstotal, abinfo.fragsize,
++			 abinfo.bytes);
++		return copy_to_user(up, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
++
++	default:
++		dev_dbg(&dac->pdev->dev, "Unimplemented ioctl cmd: 0x%x\n", cmd);
++		return -EINVAL;
++	}
++}
++
++static int abdac_dsp_open(struct inode *inode, struct file *file)
++{
++	struct at32_dac *dac = the_dac;
++	int ret;
++
++	if (file->f_mode & FMODE_READ)
++		return -ENXIO;
++
++	down(&dac->sem);
++	ret = -EBUSY;
++	if (dac->busy)
++		goto out;
++
++	dac->dma.head = dac->dma.tail = 0;
++
++	/* FIXME: What are the correct defaults?  */
++	dac->dsp_settings.channels = 2;
++	abdac_set_format(dac, AFMT_S16_BE);
++	ret = abdac_set_sample_rate(dac, 8000);
++	if (ret)
++		goto out;
++
++	file->private_data = dac;
++	dac->busy = 1;
++
++	ret = 0;
++
++out:
++	up(&dac->sem);
++	return ret;
++}
++
++static int abdac_dsp_release(struct inode *inode, struct file *file)
++{
++	struct at32_dac *dac = file->private_data;
++
++	down(&dac->sem);
++
++	abdac_stop(dac);
++	abdac_dma_cleanup(dac);
++	dac->busy = 0;
++
++	up(&dac->sem);
++
++	return 0;
++}
++
++static struct file_operations abdac_dsp_fops = {
++	.owner		= THIS_MODULE,
++	.llseek		= no_llseek,
++	.write		= abdac_dsp_write,
++	.ioctl		= abdac_dsp_ioctl,
++	.open		= abdac_dsp_open,
++	.release	= abdac_dsp_release,
++};
++
++static int __init abdac_probe(struct platform_device *pdev)
++{
++	struct at32_dac *dac;
++	struct resource *regs;
++	struct clk *mck;
++	struct clk *sample_clk;
++	int irq;
++	int ret;
++
++	if (the_dac)
++		return -EBUSY;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs)
++		return -ENXIO;
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0)
++		return irq;
++
++	mck = clk_get(&pdev->dev, "pclk");
++	if (IS_ERR(mck))
++		return PTR_ERR(mck);
++	sample_clk = clk_get(&pdev->dev, "sample_clk");
++	if (IS_ERR(sample_clk)) {
++		ret = PTR_ERR(sample_clk);
++		goto out_put_mck;
++	}
++	clk_enable(mck);
++
++	ret = -ENOMEM;
++	dac = kzalloc(sizeof(struct at32_dac), GFP_KERNEL);
++	if (!dac)
++		goto out_disable_clk;
++
++	spin_lock_init(&dac->lock);
++	init_MUTEX(&dac->sem);
++	init_waitqueue_head(&dac->write_wait);
++	dac->pdev = pdev;
++	dac->mck = mck;
++	dac->sample_clk = sample_clk;
++
++	dac->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!dac->regs)
++		goto out_free_dac;
++
++	ret = request_irq(irq, abdac_interrupt, 0, "dac", dac);
++	if (ret)
++		goto out_unmap_regs;
++
++	/* FIXME */
++	dac->req.req.dmac = find_dma_controller(0);
++	if (!dac->req.req.dmac)
++		goto out_free_irq;
++
++	ret = dma_alloc_channel(dac->req.req.dmac);
++	if (ret < 0)
++		goto out_free_irq;
++
++	dac->req.req.channel = ret;
++	dac->req.req.block_complete = abdac_dma_block_complete;
++	dac->req.req.error = abdac_dma_error;
++	dac->req.data_reg = regs->start + DAC_DATA;
++	dac->req.periph_id = 2; /* FIXME */
++	dac->req.direction = DMA_DIR_MEM_TO_PERIPH;
++	dac->req.width = DMA_WIDTH_32BIT;
++
++	/* Make sure the DAC is silent and disabled */
++	dac_writel(dac, DATA, 0);
++	dac_writel(dac, CTRL, 0);
++
++	ret = register_sound_dsp(&abdac_dsp_fops, -1);
++	if (ret < 0)
++		goto out_free_dma;
++	dac->dev_dsp = ret;
++
++	/* TODO: Register mixer */
++
++	the_dac = dac;
++	platform_set_drvdata(pdev, dac);
++
++	return 0;
++
++out_free_dma:
++	dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
++out_free_irq:
++	free_irq(irq, dac);
++out_unmap_regs:
++	iounmap(dac->regs);
++out_free_dac:
++	kfree(dac);
++out_disable_clk:
++	clk_disable(mck);
++	clk_put(sample_clk);
++out_put_mck:
++	clk_put(mck);
++	return ret;
++}
++
++static int __exit abdac_remove(struct platform_device *pdev)
++{
++	struct at32_dac *dac;
++
++	dac = platform_get_drvdata(pdev);
++	if (dac) {
++		unregister_sound_dsp(dac->dev_dsp);
++		dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
++		free_irq(platform_get_irq(pdev, 0), dac);
++		iounmap(dac->regs);
++		clk_disable(dac->mck);
++		clk_put(dac->sample_clk);
++		clk_put(dac->mck);
++		kfree(dac);
++		platform_set_drvdata(pdev, NULL);
++		the_dac = NULL;
++	}
++
++	return 0;
++}
++
++static struct platform_driver abdac_driver = {
++	.remove		= __exit_p(abdac_remove),
++	.driver		= {
++		.name	= "abdac",
++	},
++};
++
++static int __init abdac_init(void)
++{
++	return platform_driver_probe(&abdac_driver, abdac_probe);
++}
++module_init(abdac_init);
++
++static void __exit abdac_exit(void)
++{
++	platform_driver_unregister(&abdac_driver);
++}
++module_exit(abdac_exit);
++
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_DESCRIPTION("Sound Driver for the Atmel AT32 ABDAC");
++MODULE_LICENSE("GPL");
+diff --git a/sound/oss/at32_abdac.h b/sound/oss/at32_abdac.h
+new file mode 100644
+index 0000000..3c88e25
+--- /dev/null
++++ b/sound/oss/at32_abdac.h
+@@ -0,0 +1,59 @@
++/*
++ * Register definitions for the Atmel AT32 on-chip DAC.
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __SOUND_OSS_AT32_ABDAC_H__
++#define __SOUND_OSS_AT32_ABDAC_H__
++
++/* DAC register offsets */
++#define DAC_DATA                                0x0000
++#define DAC_CTRL                                0x0008
++#define DAC_INT_MASK                            0x000c
++#define DAC_INT_EN                              0x0010
++#define DAC_INT_DIS                             0x0014
++#define DAC_INT_CLR                             0x0018
++#define DAC_INT_STATUS                          0x001c
++#define DAC_PDC_DATA                            0x0020
++
++/* Bitfields in CTRL */
++#define DAC_SWAP_OFFSET                         30
++#define DAC_SWAP_SIZE                           1
++#define DAC_EN_OFFSET                           31
++#define DAC_EN_SIZE                             1
++
++/* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */
++#define DAC_UNDERRUN_OFFSET                     28
++#define DAC_UNDERRUN_SIZE                       1
++#define DAC_TX_READY_OFFSET                     29
++#define DAC_TX_READY_SIZE                       1
++#define DAC_TX_BUFFER_EMPTY_OFFSET              30
++#define DAC_TX_BUFFER_EMPTY_SIZE                1
++#define DAC_CHANNEL_TX_END_OFFSET               31
++#define DAC_CHANNEL_TX_END_SIZE                 1
++
++/* Bit manipulation macros */
++#define DAC_BIT(name)					\
++	(1 << DAC_##name##_OFFSET)
++#define DAC_BF(name, value)				\
++	(((value) & ((1 << DAC_##name##_SIZE) - 1))	\
++	 << DAC_##name##_OFFSET)
++#define DAC_BFEXT(name, value)				\
++	(((value) >> DAC_##name##_OFFSET)		\
++	 & ((1 << DAC_##name##_SIZE) - 1))
++#define DAC_BFINS(name, value, old)			\
++	(((old) & ~(((1 << DAC_##name##_SIZE) - 1)	\
++		    << DAC_##name##_OFFSET))		\
++	 | DAC_BF(name,value))
++
++/* Register access macros */
++#define dac_readl(port, reg)				\
++	__raw_readl((port)->regs + DAC_##reg)
++#define dac_writel(port, reg, value)			\
++	__raw_writel((value), (port)->regs + DAC_##reg)
++
++#endif /* __SOUND_OSS_AT32_ABDAC_H__ */
+diff --git a/sound/spi/Kconfig b/sound/spi/Kconfig
+new file mode 100644
+index 0000000..0d08c29
+--- /dev/null
++++ b/sound/spi/Kconfig
+@@ -0,0 +1,31 @@
++#SPI drivers
++
++menu "SPI devices"
++	depends on SND != n
++
++config SND_AT73C213
++	tristate "Atmel AT73C213 DAC driver"
++	depends on ATMEL_SSC
++	select SND_PCM
++	help
++	  Say Y here if you want to use the Atmel AT73C213 external DAC. This
++	  DAC can be found on Atmel development boards.
++
++	  This driver requires the Atmel SSC driver for sound sink, a
++	  peripheral found on most AT91 and AVR32 microprocessors.
++
++	  To compile this driver as a module, choose M here: the module will be
++	  called snd-at73c213.
++
++config SND_AT73C213_TARGET_BITRATE
++	int "Target bitrate for AT73C213"
++	depends on SND_AT73C213
++	default "48000"
++	range 8000 50000
++	help
++	  Sets the target bitrate for the bitrate calculator in the driver.
++	  Limited by hardware to be between 8000 Hz and 50000 Hz.
++
++	  Set to 48000 Hz by default.
++
++endmenu
+diff --git a/sound/spi/Makefile b/sound/spi/Makefile
+new file mode 100644
+index 0000000..026fb73
+--- /dev/null
++++ b/sound/spi/Makefile
+@@ -0,0 +1,5 @@
++# Makefile for SPI drivers
++
++snd-at73c213-objs		:= at73c213.o
++
++obj-$(CONFIG_SND_AT73C213)	+= snd-at73c213.o
+diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
+new file mode 100644
+index 0000000..f514f47
+--- /dev/null
++++ b/sound/spi/at73c213.c
+@@ -0,0 +1,1121 @@
++/*
++ * Driver for AT73C213 16-bit stereo DAC connected to Atmel SSC
++ *
++ * Copyright (C) 2006-2007 Atmel Norway
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++
++/*#define DEBUG*/
++
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++
++#include <sound/driver.h>
++#include <sound/initval.h>
++#include <sound/control.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++
++#include <linux/atmel-ssc.h>
++
++#include <linux/spi/spi.h>
++#include <linux/spi/at73c213.h>
++
++#include "at73c213.h"
++
++#define BITRATE_MIN	 8000 /* Hardware limit? */
++#define BITRATE_TARGET	CONFIG_SND_AT73C213_TARGET_BITRATE
++#define BITRATE_MAX	50000 /* Hardware limit. */
++
++/* Initial (hardware reset) AT73C213 register values. */
++static u8 snd_at73c213_original_image[18] =
++{
++	0x00,	/* 00 - CTRL    */
++	0x05,	/* 01 - LLIG    */
++	0x05,	/* 02 - RLIG    */
++	0x08,	/* 03 - LPMG    */
++	0x08,	/* 04 - RPMG    */
++	0x00,	/* 05 - LLOG    */
++	0x00,	/* 06 - RLOG    */
++	0x22,	/* 07 - OLC     */
++	0x09,	/* 08 - MC      */
++	0x00,	/* 09 - CSFC    */
++	0x00,	/* 0A - MISC    */
++	0x00,	/* 0B -         */
++	0x00,	/* 0C - PRECH   */
++	0x05,	/* 0D - AUXG    */
++	0x00,	/* 0E -         */
++	0x00,	/* 0F -         */
++	0x00,	/* 10 - RST     */
++	0x00,	/* 11 - PA_CTRL */
++};
++
++struct snd_at73c213 {
++	struct snd_card			*card;
++	struct snd_pcm			*pcm;
++	struct snd_pcm_substream	*substream;
++	struct at73c213_board_info	*board;
++	int				irq;
++	int				period;
++	unsigned long			bitrate;
++	struct clk			*bitclk;
++	struct ssc_device		*ssc;
++	struct spi_device		*spi;
++	u8				spi_wbuffer[2];
++	u8				spi_rbuffer[2];
++	/* Image of the SPI registers in AT73C213. */
++	u8				reg_image[18];
++	/* Protect registers against concurrent access. */
++	spinlock_t			lock;
++};
++
++#define get_chip(card) ((struct snd_at73c213 *)card->private_data)
++
++static int
++snd_at73c213_write_reg(struct snd_at73c213 *chip, u8 reg, u8 val)
++{
++	struct spi_message msg;
++	struct spi_transfer msg_xfer = {
++		.len		= 2,
++		.cs_change	= 0,
++	};
++	int retval;
++
++	spi_message_init(&msg);
++
++	chip->spi_wbuffer[0] = reg;
++	chip->spi_wbuffer[1] = val;
++
++	msg_xfer.tx_buf = chip->spi_wbuffer;
++	msg_xfer.rx_buf = chip->spi_rbuffer;
++	spi_message_add_tail(&msg_xfer, &msg);
++
++	retval = spi_sync(chip->spi, &msg);
++
++	if (!retval)
++		chip->reg_image[reg] = val;
++
++	return retval;
++}
++
++static struct snd_pcm_hardware snd_at73c213_playback_hw = {
++	.info		= SNDRV_PCM_INFO_INTERLEAVED |
++			  SNDRV_PCM_INFO_BLOCK_TRANSFER,
++	.formats	= SNDRV_PCM_FMTBIT_S16_BE,
++	.rates		= SNDRV_PCM_RATE_CONTINUOUS,
++	.rate_min	= 8000,  /* Replaced by chip->bitrate later. */
++	.rate_max	= 50000, /* Replaced by chip->bitrate later. */
++	.channels_min	= 2,
++	.channels_max	= 2,
++	.buffer_bytes_max = 64 * 1024 - 1,
++	.period_bytes_min = 512,
++	.period_bytes_max = 64 * 1024 - 1,
++	.periods_min	= 4,
++	.periods_max	= 1024,
++};
++
++/*
++ * Calculate and set bitrate and divisions.
++ */
++static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip)
++{
++	unsigned long ssc_rate = clk_get_rate(chip->ssc->clk);
++	unsigned long dac_rate_new, ssc_div, status;
++	unsigned long ssc_div_max, ssc_div_min;
++	int max_tries;
++
++	/*
++	 * We connect two clocks here, picking divisors so the I2S clocks
++	 * out data at the same rate the DAC clocks it in ... and as close
++	 * as practical to the desired target rate.
++	 *
++	 * The DAC master clock (MCLK) is programmable, and is either 256
++	 * or (not here) 384 times the I2S output clock (BCLK).
++	 */
++
++	/* SSC clock / (bitrate * stereo * 16-bit). */
++	ssc_div = ssc_rate / (BITRATE_TARGET * 2 * 16);
++	ssc_div_min = ssc_rate / (BITRATE_MAX * 2 * 16);
++	ssc_div_max = ssc_rate / (BITRATE_MIN * 2 * 16);
++	max_tries = (ssc_div_max - ssc_div_min) / 2;
++
++	if (max_tries < 1)
++		max_tries = 1;
++
++	/* ssc_div must be a power of 2. */
++	ssc_div = (ssc_div + 1) & ~1UL;
++
++	if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) {
++		ssc_div -= 2;
++		if ((ssc_rate / (ssc_div * 2 * 16)) > BITRATE_MAX)
++			return -ENXIO;
++	}
++
++	/* Search for a possible bitrate. */
++	do {
++		/* SSC clock / (ssc divider * 16-bit * stereo). */
++		if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN)
++			return -ENXIO;
++
++		/* 256 / (2 * 16) = 8 */
++		dac_rate_new = 8 * (ssc_rate / ssc_div);
++
++		status = clk_round_rate(chip->board->dac_clk, dac_rate_new);
++		if (status < 0)
++			return status;
++
++		/* Ignore difference smaller than 256 Hz. */
++		if ((status/256) == (dac_rate_new/256))
++			goto set_rate;
++
++		ssc_div += 2;
++	} while (--max_tries);
++
++	/* Not able to find a valid bitrate. */
++	return -ENXIO;
++
++set_rate:
++	status = clk_set_rate(chip->board->dac_clk, status);
++	if (status < 0)
++		return status;
++
++	/* Set divider in SSC device. */
++	ssc_writel(chip->ssc->regs, CMR, ssc_div/2);
++
++	/* SSC clock / (ssc divider * 16-bit * stereo). */
++	chip->bitrate = ssc_rate / (ssc_div * 16 * 2);
++
++	dev_info(&chip->spi->dev,
++			"at73c213: supported bitrate is %lu (%lu divider)\n",
++			chip->bitrate, ssc_div);
++
++	return 0;
++}
++
++static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream)
++{
++	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++
++	snd_at73c213_playback_hw.rate_min = chip->bitrate;
++	snd_at73c213_playback_hw.rate_max = chip->bitrate;
++	runtime->hw = snd_at73c213_playback_hw;
++	chip->substream = substream;
++
++	return 0;
++}
++
++static int snd_at73c213_pcm_close(struct snd_pcm_substream *substream)
++{
++	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++	chip->substream = NULL;
++	return 0;
++}
++
++static int snd_at73c213_pcm_hw_params(struct snd_pcm_substream *substream,
++				 struct snd_pcm_hw_params *hw_params)
++{
++	return snd_pcm_lib_malloc_pages(substream,
++					params_buffer_bytes(hw_params));
++}
++
++static int snd_at73c213_pcm_hw_free(struct snd_pcm_substream *substream)
++{
++	return snd_pcm_lib_free_pages(substream);
++}
++
++static int snd_at73c213_pcm_prepare(struct snd_pcm_substream *substream)
++{
++	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	int block_size;
++
++	block_size = frames_to_bytes(runtime, runtime->period_size);
++
++	chip->period = 0;
++
++	ssc_writel(chip->ssc->regs, PDC_TPR,
++			(long)runtime->dma_addr);
++	ssc_writel(chip->ssc->regs, PDC_TCR, runtime->period_size * 2);
++	ssc_writel(chip->ssc->regs, PDC_TNPR,
++			(long)runtime->dma_addr + block_size);
++	ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
++
++	return 0;
++}
++
++static int snd_at73c213_pcm_trigger(struct snd_pcm_substream *substream,
++				   int cmd)
++{
++	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++	int retval = 0;
++
++	spin_lock(&chip->lock);
++
++	switch (cmd) {
++	case SNDRV_PCM_TRIGGER_START:
++		ssc_writel(chip->ssc->regs, IER, SSC_BIT(IER_ENDTX));
++		ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTEN));
++		break;
++	case SNDRV_PCM_TRIGGER_STOP:
++		ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTDIS));
++		ssc_writel(chip->ssc->regs, IDR, SSC_BIT(IDR_ENDTX));
++		break;
++	default:
++		dev_dbg(&chip->spi->dev, "spurious command %x\n", cmd);
++		retval = -EINVAL;
++		break;
++	}
++
++	spin_unlock(&chip->lock);
++
++	return retval;
++}
++
++static snd_pcm_uframes_t
++snd_at73c213_pcm_pointer(struct snd_pcm_substream *substream)
++{
++	struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	snd_pcm_uframes_t pos;
++	unsigned long bytes;
++
++	bytes = ssc_readl(chip->ssc->regs, PDC_TPR)
++		- (unsigned long)runtime->dma_addr;
++
++	pos = bytes_to_frames(runtime, bytes);
++	if (pos >= runtime->buffer_size)
++		pos -= runtime->buffer_size;
++
++	return pos;
++}
++
++static struct snd_pcm_ops at73c213_playback_ops = {
++	.open		= snd_at73c213_pcm_open,
++	.close		= snd_at73c213_pcm_close,
++	.ioctl		= snd_pcm_lib_ioctl,
++	.hw_params	= snd_at73c213_pcm_hw_params,
++	.hw_free	= snd_at73c213_pcm_hw_free,
++	.prepare	= snd_at73c213_pcm_prepare,
++	.trigger	= snd_at73c213_pcm_trigger,
++	.pointer	= snd_at73c213_pcm_pointer,
++};
++
++static void snd_at73c213_pcm_free(struct snd_pcm *pcm)
++{
++	struct snd_at73c213 *chip = snd_pcm_chip(pcm);
++	if (chip->pcm) {
++		snd_pcm_lib_preallocate_free_for_all(chip->pcm);
++		chip->pcm = NULL;
++	}
++}
++
++static int __devinit snd_at73c213_pcm_new(struct snd_at73c213 *chip, int device)
++{
++	struct snd_pcm *pcm;
++	int retval;
++
++	retval = snd_pcm_new(chip->card, chip->card->shortname,
++			device, 1, 0, &pcm);
++	if (retval < 0)
++		goto out;
++
++	pcm->private_data = chip;
++	pcm->private_free = snd_at73c213_pcm_free;
++	pcm->info_flags = SNDRV_PCM_INFO_BLOCK_TRANSFER;
++	strcpy(pcm->name, "at73c213");
++	chip->pcm = pcm;
++
++	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &at73c213_playback_ops);
++
++	retval = snd_pcm_lib_preallocate_pages_for_all(chip->pcm,
++			SNDRV_DMA_TYPE_DEV, &chip->ssc->pdev->dev,
++			64 * 1024, 64 * 1024);
++out:
++	return retval;
++}
++
++static irqreturn_t snd_at73c213_interrupt(int irq, void *dev_id)
++{
++	struct snd_at73c213 *chip = dev_id;
++	struct snd_pcm_runtime *runtime = chip->substream->runtime;
++	u32 status;
++	int offset;
++	int block_size;
++	int next_period;
++	int retval = IRQ_NONE;
++
++	spin_lock(&chip->lock);
++
++	block_size = frames_to_bytes(runtime, runtime->period_size);
++	status = ssc_readl(chip->ssc->regs, IMR);
++
++	if (status & SSC_BIT(IMR_ENDTX)) {
++		chip->period++;
++		if (chip->period == runtime->periods)
++			chip->period = 0;
++		next_period = chip->period + 1;
++		if (next_period == runtime->periods)
++			next_period = 0;
++
++		offset = block_size * next_period;
++
++		ssc_writel(chip->ssc->regs, PDC_TNPR,
++				(long)runtime->dma_addr + offset);
++		ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
++		retval = IRQ_HANDLED;
++	}
++
++	ssc_readl(chip->ssc->regs, IMR);
++	spin_unlock(&chip->lock);
++
++	if (status & SSC_BIT(IMR_ENDTX))
++		snd_pcm_period_elapsed(chip->substream);
++
++	return retval;
++}
++
++/*
++ * Mixer functions.
++ */
++static int snd_at73c213_mono_get(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++	int reg = kcontrol->private_value & 0xff;
++	int shift = (kcontrol->private_value >> 8) & 0xff;
++	int mask = (kcontrol->private_value >> 16) & 0xff;
++	int invert = (kcontrol->private_value >> 24) & 0xff;
++
++	spin_lock_irq(&chip->lock);
++
++	ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & mask;
++
++	if (invert)
++		ucontrol->value.integer.value[0] =
++			(mask - ucontrol->value.integer.value[0]);
++
++	spin_unlock_irq(&chip->lock);
++
++	return 0;
++}
++
++static int snd_at73c213_mono_put(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++	int reg = kcontrol->private_value & 0xff;
++	int shift = (kcontrol->private_value >> 8) & 0xff;
++	int mask = (kcontrol->private_value >> 16) & 0xff;
++	int invert = (kcontrol->private_value >> 24) & 0xff;
++	int change, retval;
++	unsigned short val;
++
++	val = (ucontrol->value.integer.value[0] & mask);
++	if (invert)
++		val = mask - val;
++	val <<= shift;
++
++	spin_lock_irq(&chip->lock);
++
++	val = (chip->reg_image[reg] & ~(mask << shift)) | val;
++	change = val != chip->reg_image[reg];
++	retval = snd_at73c213_write_reg(chip, reg, val);
++
++	spin_unlock_irq(&chip->lock);
++
++	if (retval)
++		return retval;
++
++	return change;
++}
++
++static int snd_at73c213_stereo_info(struct snd_kcontrol *kcontrol,
++				  struct snd_ctl_elem_info *uinfo)
++{
++	int mask = (kcontrol->private_value >> 24) & 0xff;
++
++	if (mask == 1)
++		uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
++	else
++		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++
++	uinfo->count = 2;
++	uinfo->value.integer.min = 0;
++	uinfo->value.integer.max = mask;
++
++	return 0;
++}
++
++static int snd_at73c213_stereo_get(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++	int left_reg = kcontrol->private_value & 0xff;
++	int right_reg = (kcontrol->private_value >> 8) & 0xff;
++	int shift_left = (kcontrol->private_value >> 16) & 0x07;
++	int shift_right = (kcontrol->private_value >> 19) & 0x07;
++	int mask = (kcontrol->private_value >> 24) & 0xff;
++	int invert = (kcontrol->private_value >> 22) & 1;
++
++	spin_lock_irq(&chip->lock);
++
++	ucontrol->value.integer.value[0] =
++		(chip->reg_image[left_reg] >> shift_left) & mask;
++	ucontrol->value.integer.value[1] =
++		(chip->reg_image[right_reg] >> shift_right) & mask;
++
++	if (invert) {
++		ucontrol->value.integer.value[0] =
++			(mask - ucontrol->value.integer.value[0]);
++		ucontrol->value.integer.value[1] =
++			(mask - ucontrol->value.integer.value[1]);
++	}
++
++	spin_unlock_irq(&chip->lock);
++
++	return 0;
++}
++
++static int snd_at73c213_stereo_put(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++	int left_reg = kcontrol->private_value & 0xff;
++	int right_reg = (kcontrol->private_value >> 8) & 0xff;
++	int shift_left = (kcontrol->private_value >> 16) & 0x07;
++	int shift_right = (kcontrol->private_value >> 19) & 0x07;
++	int mask = (kcontrol->private_value >> 24) & 0xff;
++	int invert = (kcontrol->private_value >> 22) & 1;
++	int change, retval;
++	unsigned short val1, val2;
++
++	val1 = ucontrol->value.integer.value[0] & mask;
++	val2 = ucontrol->value.integer.value[1] & mask;
++	if (invert) {
++		val1 = mask - val1;
++		val2 = mask - val2;
++	}
++	val1 <<= shift_left;
++	val2 <<= shift_right;
++
++	spin_lock_irq(&chip->lock);
++
++	val1 = (chip->reg_image[left_reg] & ~(mask << shift_left)) | val1;
++	val2 = (chip->reg_image[right_reg] & ~(mask << shift_right)) | val2;
++	change = val1 != chip->reg_image[left_reg]
++		|| val2 != chip->reg_image[right_reg];
++	retval = snd_at73c213_write_reg(chip, left_reg, val1);
++	if (retval) {
++		spin_unlock_irq(&chip->lock);
++		goto out;
++	}
++	retval = snd_at73c213_write_reg(chip, right_reg, val2);
++	if (retval) {
++		spin_unlock_irq(&chip->lock);
++		goto out;
++	}
++
++	spin_unlock_irq(&chip->lock);
++
++	return change;
++
++out:
++	return retval;
++}
++
++static int snd_at73c213_mono_switch_info(struct snd_kcontrol *kcontrol,
++				  struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
++	uinfo->count = 1;
++	uinfo->value.integer.min = 0;
++	uinfo->value.integer.max = 1;
++
++	return 0;
++}
++
++static int snd_at73c213_mono_switch_get(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++	int reg = kcontrol->private_value & 0xff;
++	int shift = (kcontrol->private_value >> 8) & 0xff;
++	int invert = (kcontrol->private_value >> 24) & 0xff;
++
++	spin_lock_irq(&chip->lock);
++
++	ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & 0x01;
++
++	if (invert)
++		ucontrol->value.integer.value[0] =
++			(0x01 - ucontrol->value.integer.value[0]);
++
++	spin_unlock_irq(&chip->lock);
++
++	return 0;
++}
++
++static int snd_at73c213_mono_switch_put(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++	int reg = kcontrol->private_value & 0xff;
++	int shift = (kcontrol->private_value >> 8) & 0xff;
++	int mask = (kcontrol->private_value >> 16) & 0xff;
++	int invert = (kcontrol->private_value >> 24) & 0xff;
++	int change, retval;
++	unsigned short val;
++
++	if (ucontrol->value.integer.value[0])
++		val = mask;
++	else
++		val = 0;
++
++	if (invert)
++		val = mask - val;
++	val <<= shift;
++
++	spin_lock_irq(&chip->lock);
++
++	val |= (chip->reg_image[reg] & ~(mask << shift));
++	change = val != chip->reg_image[reg];
++
++	retval = snd_at73c213_write_reg(chip, reg, val);
++
++	spin_unlock_irq(&chip->lock);
++
++	if (retval)
++		return retval;
++
++	return change;
++}
++
++static int snd_at73c213_pa_volume_info(struct snd_kcontrol *kcontrol,
++				  struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = 1;
++	uinfo->value.integer.min = 0;
++	uinfo->value.integer.max = ((kcontrol->private_value >> 16) & 0xff) - 1;
++
++	return 0;
++}
++
++static int snd_at73c213_line_capture_volume_info(
++		struct snd_kcontrol *kcontrol,
++		struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = 2;
++	/* When inverted will give values 0x10001 => 0. */
++	uinfo->value.integer.min = 14;
++	uinfo->value.integer.max = 31;
++
++	return 0;
++}
++
++static int snd_at73c213_aux_capture_volume_info(
++		struct snd_kcontrol *kcontrol,
++		struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = 1;
++	/* When inverted will give values 0x10001 => 0. */
++	uinfo->value.integer.min = 14;
++	uinfo->value.integer.max = 31;
++
++	return 0;
++}
++
++#define AT73C213_MONO_SWITCH(xname, xindex, reg, shift, mask, invert)	\
++{									\
++	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,				\
++	.name = xname,							\
++	.index = xindex,						\
++	.info = snd_at73c213_mono_switch_info,				\
++	.get = snd_at73c213_mono_switch_get,				\
++	.put = snd_at73c213_mono_switch_put,				\
++	.private_value = (reg | (shift << 8) | (mask << 16) | (invert << 24)) \
++}
++
++#define AT73C213_STEREO(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
++{									\
++	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,				\
++	.name = xname,							\
++	.index = xindex,						\
++	.info = snd_at73c213_stereo_info,				\
++	.get = snd_at73c213_stereo_get,					\
++	.put = snd_at73c213_stereo_put,					\
++	.private_value = (left_reg | (right_reg << 8)			\
++			| (shift_left << 16) | (shift_right << 19)	\
++			| (mask << 24) | (invert << 22))		\
++}
++
++static struct snd_kcontrol_new snd_at73c213_controls[] __devinitdata = {
++AT73C213_STEREO("Master Playback Volume", 0, DAC_LMPG, DAC_RMPG, 0, 0, 0x1f, 1),
++AT73C213_STEREO("Master Playback Switch", 0, DAC_LMPG, DAC_RMPG, 5, 5, 1, 1),
++AT73C213_STEREO("PCM Playback Volume", 0, DAC_LLOG, DAC_RLOG, 0, 0, 0x1f, 1),
++AT73C213_STEREO("PCM Playback Switch", 0, DAC_LLOG, DAC_RLOG, 5, 5, 1, 1),
++AT73C213_MONO_SWITCH("Mono PA Playback Switch", 0, DAC_CTRL, DAC_CTRL_ONPADRV, 0x01, 0),
++{
++	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
++	.name	= "PA Playback Volume",
++	.index	= 0,
++	.info	= snd_at73c213_pa_volume_info,
++	.get	= snd_at73c213_mono_get,
++	.put	= snd_at73c213_mono_put,
++	.private_value	= PA_CTRL | (PA_CTRL_APAGAIN << 8) | (0x0f << 16) | (1 << 24),
++},
++AT73C213_MONO_SWITCH("PA High Gain Playback Switch", 0, PA_CTRL, PA_CTRL_APALP, 0x01, 1),
++AT73C213_MONO_SWITCH("PA Playback Switch", 0, PA_CTRL, PA_CTRL_APAON, 0x01, 0),
++{
++	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
++	.name	= "Aux Capture Volume",
++	.index	= 0,
++	.info	= snd_at73c213_aux_capture_volume_info,
++	.get	= snd_at73c213_mono_get,
++	.put	= snd_at73c213_mono_put,
++	.private_value	= DAC_AUXG | (0 << 8) | (0x1f << 16) | (1 << 24),
++},
++AT73C213_MONO_SWITCH("Aux Capture Switch", 0, DAC_CTRL, DAC_CTRL_ONAUXIN, 0x01, 0),
++{
++	.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
++	.name	= "Line Capture Volume",
++	.index	= 0,
++	.info	= snd_at73c213_line_capture_volume_info,
++	.get	= snd_at73c213_stereo_get,
++	.put	= snd_at73c213_stereo_put,
++	.private_value	= DAC_LLIG | (DAC_RLIG << 8) | (0 << 16) | (0 << 19)
++		| (0x1f << 24) | (1 << 22),
++},
++AT73C213_MONO_SWITCH("Line Capture Switch", 0, DAC_CTRL, 0, 0x03, 0),
++};
++
++static int __devinit snd_at73c213_mixer(struct snd_at73c213 *chip)
++{
++	struct snd_card *card;
++	int errval, idx;
++
++	if (chip == NULL || chip->pcm == NULL)
++		return -EINVAL;
++
++	card = chip->card;
++
++	strcpy(card->mixername, chip->pcm->name);
++
++	for (idx = 0; idx < ARRAY_SIZE(snd_at73c213_controls); idx++) {
++		errval = snd_ctl_add(card,
++				snd_ctl_new1(&snd_at73c213_controls[idx],
++					chip));
++		if (errval < 0)
++			goto cleanup;
++	}
++
++	return 0;
++
++cleanup:
++	for (idx = 1; idx < ARRAY_SIZE(snd_at73c213_controls) + 1; idx++) {
++		struct snd_kcontrol *kctl;
++		kctl = snd_ctl_find_numid(card, idx);
++		if (kctl)
++			snd_ctl_remove(card, kctl);
++	}
++	return errval;
++}
++
++/*
++ * Device functions
++ */
++static int snd_at73c213_ssc_init(struct snd_at73c213 *chip)
++{
++	/*
++	 * Continuous clock output.
++	 * Starts on falling TF.
++	 * Delay 1 cycle (1 bit).
++	 * Periode is 16 bit (16 - 1).
++	 */
++	ssc_writel(chip->ssc->regs, TCMR,
++			SSC_BF(TCMR_CKO, 1)
++			| SSC_BF(TCMR_START, 4)
++			| SSC_BF(TCMR_STTDLY, 1)
++			| SSC_BF(TCMR_PERIOD, 16 - 1));
++	/*
++	 * Data length is 16 bit (16 - 1).
++	 * Transmit MSB first.
++	 * Transmit 2 words each transfer.
++	 * Frame sync length is 16 bit (16 - 1).
++	 * Frame starts on negative pulse.
++	 */
++	ssc_writel(chip->ssc->regs, TFMR,
++			SSC_BF(TFMR_DATLEN, 16 - 1)
++			| SSC_BIT(TFMR_MSBF)
++			| SSC_BF(TFMR_DATNB, 1)
++			| SSC_BF(TFMR_FSLEN, 16 - 1)
++			| SSC_BF(TFMR_FSOS, 1));
++
++	return 0;
++}
++
++static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
++{
++	int retval;
++	unsigned char dac_ctrl = 0;
++
++	retval = snd_at73c213_set_bitrate(chip);
++	if (retval)
++		goto out;
++
++	/* Enable DAC master clock. */
++	clk_enable(chip->board->dac_clk);
++
++	/* Initialize at73c213 on SPI bus. */
++	retval = snd_at73c213_write_reg(chip, DAC_RST, 0x04);
++	if (retval)
++		goto out_clk;
++	msleep(1);
++	retval = snd_at73c213_write_reg(chip, DAC_RST, 0x03);
++	if (retval)
++		goto out_clk;
++
++	/* Precharge everything. */
++	retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0xff);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APAPRECH));
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_CTRL,
++			(1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR));
++	if (retval)
++		goto out_clk;
++
++	msleep(50);
++
++	/* Stop precharging PA. */
++	retval = snd_at73c213_write_reg(chip, PA_CTRL,
++			(1<<PA_CTRL_APALP) | 0x0f);
++	if (retval)
++		goto out_clk;
++
++	msleep(450);
++
++	/* Stop precharging DAC, turn on master power. */
++	retval = snd_at73c213_write_reg(chip, DAC_PRECH, (1<<DAC_PRECH_ONMSTR));
++	if (retval)
++		goto out_clk;
++
++	msleep(1);
++
++	/* Turn on DAC. */
++	dac_ctrl = (1<<DAC_CTRL_ONDACL) | (1<<DAC_CTRL_ONDACR)
++		| (1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR);
++
++	retval = snd_at73c213_write_reg(chip, DAC_CTRL, dac_ctrl);
++	if (retval)
++		goto out_clk;
++
++	/* Mute sound. */
++	retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
++	if (retval)
++		goto out_clk;
++	retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
++	if (retval)
++		goto out_clk;
++
++	/* Enable I2S device, i.e. clock output. */
++	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
++
++	goto out;
++
++out_clk:
++	clk_disable(chip->board->dac_clk);
++out:
++	return retval;
++}
++
++static int snd_at73c213_dev_free(struct snd_device *device)
++{
++	struct snd_at73c213 *chip = device->device_data;
++
++	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
++	if (chip->irq >= 0) {
++		free_irq(chip->irq, chip);
++		chip->irq = -1;
++	}
++
++	return 0;
++}
++
++static int __devinit snd_at73c213_dev_init(struct snd_card *card,
++					 struct spi_device *spi)
++{
++	static struct snd_device_ops ops = {
++		.dev_free	= snd_at73c213_dev_free,
++	};
++	struct snd_at73c213 *chip = get_chip(card);
++	int irq, retval;
++
++	irq = chip->ssc->irq;
++	if (irq < 0)
++		return irq;
++
++	spin_lock_init(&chip->lock);
++	chip->card = card;
++	chip->irq = -1;
++
++	retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip);
++	if (retval) {
++		dev_dbg(&chip->spi->dev, "unable to request irq %d\n", irq);
++		goto out;
++	}
++	chip->irq = irq;
++
++	memcpy(&chip->reg_image, &snd_at73c213_original_image,
++			sizeof(snd_at73c213_original_image));
++
++	retval = snd_at73c213_ssc_init(chip);
++	if (retval)
++		goto out_irq;
++
++	retval = snd_at73c213_chip_init(chip);
++	if (retval)
++		goto out_irq;
++
++	retval = snd_at73c213_pcm_new(chip, 0);
++	if (retval)
++		goto out_irq;
++
++	retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
++	if (retval)
++		goto out_irq;
++
++	retval = snd_at73c213_mixer(chip);
++	if (retval)
++		goto out_snd_dev;
++
++	snd_card_set_dev(card, &spi->dev);
++
++	goto out;
++
++out_snd_dev:
++	snd_device_free(card, chip);
++out_irq:
++	free_irq(chip->irq, chip);
++	chip->irq = -1;
++out:
++	return retval;
++}
++
++static int snd_at73c213_probe(struct spi_device *spi)
++{
++	struct snd_card			*card;
++	struct snd_at73c213		*chip;
++	struct at73c213_board_info	*board;
++	int				retval;
++	char				id[16];
++
++	board = spi->dev.platform_data;
++	if (!board) {
++		dev_dbg(&spi->dev, "no platform_data\n");
++		return -ENXIO;
++	}
++
++	if (!board->dac_clk) {
++		dev_dbg(&spi->dev, "no DAC clk\n");
++		return -ENXIO;
++	}
++
++	if (IS_ERR(board->dac_clk)) {
++		dev_dbg(&spi->dev, "no DAC clk\n");
++		return PTR_ERR(board->dac_clk);
++	}
++
++	retval = -ENOMEM;
++
++	/* Allocate "card" using some unused identifiers. */
++	snprintf(id, sizeof id, "at73c213_%d", board->ssc_id);
++	card = snd_card_new(-1, id, THIS_MODULE, sizeof(struct snd_at73c213));
++	if (!card)
++		goto out;
++
++	chip = card->private_data;
++	chip->spi = spi;
++	chip->board = board;
++
++	chip->ssc = ssc_request(board->ssc_id);
++	if (IS_ERR(chip->ssc)) {
++		dev_dbg(&spi->dev, "could not get ssc%d device\n",
++				board->ssc_id);
++		retval = PTR_ERR(chip->ssc);
++		goto out_card;
++	}
++
++	retval = snd_at73c213_dev_init(card, spi);
++	if (retval)
++		goto out_ssc;
++
++	strcpy(card->driver, "at73c213");
++	strcpy(card->shortname, board->shortname);
++	sprintf(card->longname, "%s on irq %d", card->shortname, chip->irq);
++
++	retval = snd_card_register(card);
++	if (retval)
++		goto out_ssc;
++
++	dev_set_drvdata(&spi->dev, card);
++
++	goto out;
++
++out_ssc:
++	ssc_free(chip->ssc);
++out_card:
++	snd_card_free(card);
++out:
++	return retval;
++}
++
++static int __devexit snd_at73c213_remove(struct spi_device *spi)
++{
++	struct snd_card *card = dev_get_drvdata(&spi->dev);
++	struct snd_at73c213 *chip = card->private_data;
++	int retval;
++
++	/* Stop playback. */
++	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
++
++	/* Mute sound. */
++	retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
++	if (retval)
++		goto out;
++	retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
++	if (retval)
++		goto out;
++	retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
++	if (retval)
++		goto out;
++	retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
++	if (retval)
++		goto out;
++	retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
++	if (retval)
++		goto out;
++	retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
++	if (retval)
++		goto out;
++	retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
++	if (retval)
++		goto out;
++
++	/* Turn off PA. */
++	retval = snd_at73c213_write_reg(chip, PA_CTRL, (chip->reg_image[PA_CTRL]|0x0f));
++	if (retval)
++		goto out;
++	msleep(10);
++	retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0f);
++	if (retval)
++		goto out;
++
++	/* Turn off external DAC. */
++	retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x0c);
++	if (retval)
++		goto out;
++	msleep(2);
++	retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x00);
++	if (retval)
++		goto out;
++
++	/* Turn off master power. */
++	retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0x00);
++	if (retval)
++		goto out;
++
++out:
++	/* Stop DAC master clock. */
++	clk_disable(chip->board->dac_clk);
++
++	ssc_free(chip->ssc);
++	snd_card_free(card);
++	dev_set_drvdata(&spi->dev, NULL);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int snd_at73c213_suspend(struct spi_device *spi, pm_message_t msg)
++{
++	struct snd_card *card = dev_get_drvdata(&spi->dev);
++	struct snd_at73c213 *chip = card->private_data;
++
++	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
++	clk_disable(chip->board->dac_clk);
++
++	return 0;
++}
++
++static int snd_at73c213_resume(struct spi_device *spi)
++{
++	struct snd_card *card = dev_get_drvdata(&spi->dev);
++	struct snd_at73c213 *chip = card->private_data;
++
++	clk_enable(chip->board->dac_clk);
++	ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
++
++	return 0;
++}
++#else
++#define snd_at73c213_suspend NULL
++#define snd_at73c213_resume NULL
++#endif
++
++static struct spi_driver at73c213_driver = {
++	.driver		= {
++		.name	= "at73c213",
++	},
++	.probe		= snd_at73c213_probe,
++	.suspend	= snd_at73c213_suspend,
++	.resume		= snd_at73c213_resume,
++	.remove		= __devexit_p(snd_at73c213_remove),
++};
++
++static int __init at73c213_init(void)
++{
++	return spi_register_driver(&at73c213_driver);
++}
++module_init(at73c213_init);
++
++static void __exit at73c213_exit(void)
++{
++	spi_unregister_driver(&at73c213_driver);
++}
++module_exit(at73c213_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("Sound driver for AT73C213 with Atmel SSC");
++MODULE_LICENSE("GPL");
+diff --git a/sound/spi/at73c213.h b/sound/spi/at73c213.h
+new file mode 100644
+index 0000000..fd8b372
+--- /dev/null
++++ b/sound/spi/at73c213.h
+@@ -0,0 +1,119 @@
++/*
++ * Driver for the AT73C213 16-bit stereo DAC on Atmel ATSTK1000
++ *
++ * Copyright (C) 2006 - 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++ * 02111-1307, USA.
++ *
++ * The full GNU General Public License is included in this
++ * distribution in the file called COPYING.
++ */
++
++#ifndef _SND_AT73C213_H
++#define _SND_AT73C213_H
++
++/* DAC control register */
++#define DAC_CTRL		0x00
++#define DAC_CTRL_ONPADRV	7
++#define DAC_CTRL_ONAUXIN	6
++#define DAC_CTRL_ONDACR		5
++#define DAC_CTRL_ONDACL		4
++#define DAC_CTRL_ONLNOR		3
++#define DAC_CTRL_ONLNOL		2
++#define DAC_CTRL_ONLNIR		1
++#define DAC_CTRL_ONLNIL		0
++
++/* DAC left line in gain register */
++#define DAC_LLIG		0x01
++#define DAC_LLIG_LLIG		0
++
++/* DAC right line in gain register */
++#define DAC_RLIG		0x02
++#define DAC_RLIG_RLIG		0
++
++/* DAC Left Master Playback Gain Register */
++#define DAC_LMPG		0x03
++#define DAC_LMPG_LMPG		0
++
++/* DAC Right Master Playback Gain Register */
++#define DAC_RMPG		0x04
++#define DAC_RMPG_RMPG		0
++
++/* DAC Left Line Out Gain Register */
++#define DAC_LLOG		0x05
++#define DAC_LLOG_LLOG		0
++
++/* DAC Right Line Out Gain Register */
++#define DAC_RLOG		0x06
++#define DAC_RLOG_RLOG		0
++
++/* DAC Output Level Control Register */
++#define DAC_OLC			0x07
++#define DAC_OLC_RSHORT		7
++#define DAC_OLC_ROLC		4
++#define DAC_OLC_LSHORT		3
++#define DAC_OLC_LOLC		0
++
++/* DAC Mixer Control Register */
++#define DAC_MC			0x08
++#define DAC_MC_INVR		5
++#define DAC_MC_INVL		4
++#define DAC_MC_RMSMIN2		3
++#define DAC_MC_RMSMIN1		2
++#define DAC_MC_LMSMIN2		1
++#define DAC_MC_LMSMIN1		0
++
++/* DAC Clock and Sampling Frequency Control Register */
++#define DAC_CSFC		0x09
++#define DAC_CSFC_OVRSEL		4
++
++/* DAC Miscellaneous Register */
++#define DAC_MISC		0x0A
++#define DAC_MISC_VCMCAPSEL	7
++#define DAC_MISC_DINTSEL	4
++#define DAC_MISC_DITHEN		3
++#define DAC_MISC_DEEMPEN	2
++#define DAC_MISC_NBITS		0
++
++/* DAC Precharge Control Register */
++#define DAC_PRECH		0x0C
++#define DAC_PRECH_PRCHGPDRV	7
++#define DAC_PRECH_PRCHGAUX1	6
++#define DAC_PRECH_PRCHGLNOR	5
++#define DAC_PRECH_PRCHGLNOL	4
++#define DAC_PRECH_PRCHGLNIR	3
++#define DAC_PRECH_PRCHGLNIL	2
++#define DAC_PRECH_PRCHG		1
++#define DAC_PRECH_ONMSTR	0
++
++/* DAC Auxiliary Input Gain Control Register */
++#define DAC_AUXG		0x0D
++#define DAC_AUXG_AUXG		0
++
++/* DAC Reset Register */
++#define DAC_RST			0x10
++#define DAC_RST_RESMASK		2
++#define DAC_RST_RESFILZ		1
++#define DAC_RST_RSTZ		0
++
++/* Power Amplifier Control Register */
++#define PA_CTRL			0x11
++#define PA_CTRL_APAON		6
++#define PA_CTRL_APAPRECH	5
++#define PA_CTRL_APALP		4
++#define PA_CTRL_APAGAIN		0
++
++#endif /* _SND_AT73C213_H */
diff --git a/target/device/Atmel/atngw100-base/kernel-patches/linux-2.6.23-200-fix-include-typo-for-atngw100-board.patch b/target/device/Atmel/atngw100-base/kernel-patches/linux-2.6.23-200-fix-include-typo-for-atngw100-board.patch
new file mode 100644
index 000000000..99a9d149b
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/kernel-patches/linux-2.6.23-200-fix-include-typo-for-atngw100-board.patch
@@ -0,0 +1,11 @@
+--- a/arch/avr32/boards/atngw100/setup.c	2007-11-02 10:47:52.000000000 +0100
++++ b/arch/avr32/boards/atngw100/setup.c	2007-11-02 10:48:00.000000000 +0100
+@@ -20,7 +20,7 @@
+ #include <asm/io.h>
+ #include <asm/setup.h>
+ 
+-#include <asm/arch/at32ap7000.h>
++#include <asm/arch/at32ap700x.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/init.h>
+ #include <asm/arch/portmux.h>
diff --git a/target/device/Atmel/atngw100-base/kernel-patches/linux-2.6.24-100-avr32-git.1.patch b/target/device/Atmel/atngw100-base/kernel-patches/linux-2.6.24-100-avr32-git.1.patch
new file mode 100644
index 000000000..173000063
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/kernel-patches/linux-2.6.24-100-avr32-git.1.patch
@@ -0,0 +1,16922 @@
+diff -Nrup linux-2.6.24/arch/arm/mach-at91/at91sam9261_devices.c linux-avr32/arch/arm/mach-at91/at91sam9261_devices.c
+--- linux-2.6.24/arch/arm/mach-at91/at91sam9261_devices.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/arm/mach-at91/at91sam9261_devices.c	2008-02-01 14:51:35.000000000 -0500
+@@ -530,6 +530,20 @@ void __init at91_add_device_lcdc(struct 
+ 	at91_set_B_periph(AT91_PIN_PB27, 0);	/* LCDD22 */
+ 	at91_set_B_periph(AT91_PIN_PB28, 0);	/* LCDD23 */
+ 
++#ifdef CONFIG_FB_INTSRAM
++	{
++		void __iomem *fb;
++		struct resource *fb_res = &lcdc_resources[2];
++		size_t fb_len = fb_res->end - fb_res->start + 1;
++
++		fb = ioremap_writecombine(fb_res->start, fb_len);
++		if (fb) {
++			memset(fb, 0, fb_len);
++			iounmap(fb, fb_len);
++		}
++	}
++#endif
++
+ 	lcdc_data = *data;
+ 	platform_device_register(&at91_lcdc_device);
+ }
+diff -Nrup linux-2.6.24/arch/arm/mach-at91/at91sam9rl_devices.c linux-avr32/arch/arm/mach-at91/at91sam9rl_devices.c
+--- linux-2.6.24/arch/arm/mach-at91/at91sam9rl_devices.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/arm/mach-at91/at91sam9rl_devices.c	2008-02-01 14:51:35.000000000 -0500
+@@ -375,6 +375,20 @@ void __init at91_add_device_lcdc(struct 
+ 	at91_set_B_periph(AT91_PIN_PC24, 0);	/* LCDD22 */
+ 	at91_set_B_periph(AT91_PIN_PC25, 0);	/* LCDD23 */
+ 
++#ifdef CONFIG_FB_INTSRAM
++	{
++		void __iomem *fb;
++		struct resource *fb_res = &lcdc_resources[2];
++		size_t fb_len = fb_res->end - fb_res->start + 1;
++
++		fb = ioremap_writecombine(fb_res->start, fb_len);
++		if (fb) {
++			memset(fb, 0, fb_len);
++			iounmap(fb, fb_len);
++		}
++	}
++#endif
++
+ 	lcdc_data = *data;
+ 	platform_device_register(&at91_lcdc_device);
+ }
+diff -Nrup linux-2.6.24/arch/avr32/boards/atngw100/Kconfig linux-avr32/arch/avr32/boards/atngw100/Kconfig
+--- linux-2.6.24/arch/avr32/boards/atngw100/Kconfig	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/boards/atngw100/Kconfig	2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,12 @@
++# NGW100 customization
++
++config BOARD_ATNGW100_I2C_GPIO
++	bool "Use GPIO for i2c instead of built-in TWI module"
++	help
++	  The driver for the built-in TWI module has been plagued by
++	  various problems, while the i2c-gpio driver is based on the
++	  trusty old i2c-algo-bit bitbanging engine, making it work
++	  on pretty much any setup.
++
++	  Choose 'Y' here if you're having i2c-related problems and
++	  want to rule out the i2c bus driver.
+diff -Nrup linux-2.6.24/arch/avr32/boards/atngw100/setup.c linux-avr32/arch/avr32/boards/atngw100/setup.c
+--- linux-2.6.24/arch/avr32/boards/atngw100/setup.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/boards/atngw100/setup.c	2008-02-01 14:51:35.000000000 -0500
+@@ -20,7 +20,7 @@
+ #include <asm/io.h>
+ #include <asm/setup.h>
+ 
+-#include <asm/arch/at32ap7000.h>
++#include <asm/arch/at32ap700x.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/init.h>
+ #include <asm/arch/portmux.h>
+@@ -42,6 +42,11 @@ static struct spi_board_info spi0_board_
+ 	},
+ };
+ 
++static struct mci_platform_data __initdata mci0_data = {
++	.detect_pin	= GPIO_PIN_PC(25),
++	.wp_pin		= GPIO_PIN_PE(0),
++};
++
+ /*
+  * The next two functions should go away as the boot loader is
+  * supposed to initialize the macb address registers with a valid
+@@ -124,6 +129,7 @@ static struct platform_device ngw_gpio_l
+ 	}
+ };
+ 
++#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
+ static struct i2c_gpio_platform_data i2c_gpio_data = {
+ 	.sda_pin		= GPIO_PIN_PA(6),
+ 	.scl_pin		= GPIO_PIN_PA(7),
+@@ -139,6 +145,7 @@ static struct platform_device i2c_gpio_d
+ 		.platform_data	= &i2c_gpio_data,
+ 	},
+ };
++#endif
+ 
+ static int __init atngw100_init(void)
+ {
+@@ -157,6 +164,7 @@ static int __init atngw100_init(void)
+ 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
+ 
+ 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++	at32_add_device_mci(0, &mci0_data);
+ 	at32_add_device_usba(0, NULL);
+ 
+ 	for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
+@@ -165,11 +173,15 @@ static int __init atngw100_init(void)
+ 	}
+ 	platform_device_register(&ngw_gpio_leds);
+ 
++#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
+ 	at32_select_gpio(i2c_gpio_data.sda_pin,
+ 		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ 	at32_select_gpio(i2c_gpio_data.scl_pin,
+ 		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ 	platform_device_register(&i2c_gpio_device);
++#else
++	at32_add_device_twi(0);
++#endif
+ 
+ 	return 0;
+ }
+diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/atstk1000.h linux-avr32/arch/avr32/boards/atstk1000/atstk1000.h
+--- linux-2.6.24/arch/avr32/boards/atstk1000/atstk1000.h	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/boards/atstk1000/atstk1000.h	2008-02-01 14:51:35.000000000 -0500
+@@ -12,4 +12,6 @@
+ 
+ extern struct atmel_lcdfb_info atstk1000_lcdc_data;
+ 
++void atstk1000_setup_j2_leds(void);
++
+ #endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */
+diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/atstk1002.c linux-avr32/arch/avr32/boards/atstk1000/atstk1002.c
+--- linux-2.6.24/arch/avr32/boards/atstk1000/atstk1002.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/boards/atstk1000/atstk1002.c	2008-02-01 14:51:35.000000000 -0500
+@@ -11,7 +11,6 @@
+ #include <linux/etherdevice.h>
+ #include <linux/init.h>
+ #include <linux/kernel.h>
+-#include <linux/leds.h>
+ #include <linux/platform_device.h>
+ #include <linux/string.h>
+ #include <linux/types.h>
+@@ -22,7 +21,7 @@
+ 
+ #include <asm/io.h>
+ #include <asm/setup.h>
+-#include <asm/arch/at32ap7000.h>
++#include <asm/arch/at32ap700x.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/init.h>
+ #include <asm/arch/portmux.h>
+@@ -49,18 +48,16 @@ static struct eth_platform_data __initda
+ 	},
+ };
+ 
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+ static struct at73c213_board_info at73c213_data = {
+ 	.ssc_id		= 0,
+ 	.shortname	= "AVR32 STK1000 external DAC",
+ };
+ #endif
+-#endif
+ 
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
+ static struct spi_board_info spi0_board_info[] __initdata = {
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+ 	{
+ 		/* AT73C213 */
+ 		.modalias	= "at73c213",
+@@ -80,12 +77,25 @@ static struct spi_board_info spi0_board_
+ };
+ #endif
+ 
+-#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
+ static struct spi_board_info spi1_board_info[] __initdata = { {
+ 	/* patch in custom entries here */
+ } };
+ #endif
+ 
++static struct cf_platform_data __initdata cf0_data = {
++#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
++	.detect_pin	= CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
++	.reset_pin	= CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
++#else
++	.detect_pin	= GPIO_PIN_NONE,
++	.reset_pin	= GPIO_PIN_NONE,
++#endif
++	.vcc_pin	= GPIO_PIN_NONE,
++	.ready_pin	= GPIO_PIN_PB(27),
++	.cs		= 4,
++};
++
+ /*
+  * The next two functions should go away as the boot loader is
+  * supposed to initialize the macb address registers with a valid
+@@ -141,68 +151,8 @@ static void __init set_hw_addr(struct pl
+ 	clk_put(pclk);
+ }
+ 
+-#ifdef CONFIG_BOARD_ATSTK1002_J2_LED
+-
+-static struct gpio_led stk_j2_led[] = {
+-#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8
+-#define LEDSTRING "J2 jumpered to LED8"
+-	{ .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
+-	{ .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
+-	{ .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
+-	{ .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
+-	{ .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
+-	{ .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
+-	{ .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
+-	{ .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
+-			.default_trigger = "heartbeat", },
+-#else	/* RGB */
+-#define LEDSTRING "J2 jumpered to RGB LEDs"
+-	{ .name = "r1:red",     .gpio = GPIO_PIN_PB( 8), },
+-	{ .name = "g1:green",   .gpio = GPIO_PIN_PB(10), },
+-	{ .name = "b1:blue",    .gpio = GPIO_PIN_PB(14), },
+-
+-	{ .name = "r2:red",     .gpio = GPIO_PIN_PB( 9),
+-			.default_trigger = "heartbeat", },
+-	{ .name = "g2:green",   .gpio = GPIO_PIN_PB(13), },
+-	{ .name = "b2:blue",    .gpio = GPIO_PIN_PB(15),
+-			.default_trigger = "heartbeat", },
+-	/* PB16, PB30 unused */
+-#endif
+-};
+-
+-static struct gpio_led_platform_data stk_j2_led_data = {
+-	.num_leds	= ARRAY_SIZE(stk_j2_led),
+-	.leds		= stk_j2_led,
+-};
+-
+-static struct platform_device stk_j2_led_dev = {
+-	.name		= "leds-gpio",
+-	.id		= 2,	/* gpio block J2 */
+-	.dev		= {
+-		.platform_data	= &stk_j2_led_data,
+-	},
+-};
+-
+-static void setup_j2_leds(void)
+-{
+-	unsigned	i;
+-
+-	for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++)
+-		at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
+-
+-	printk("STK1002: " LEDSTRING "\n");
+-	platform_device_register(&stk_j2_led_dev);
+-}
+-
+-#else
+-static void setup_j2_leds(void)
+-{
+-}
+-#endif
+-
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
+-static void __init at73c213_set_clk(struct at73c213_board_info *info)
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static void __init atstk1002_setup_extdac(void)
+ {
+ 	struct clk *gclk;
+ 	struct clk *pll;
+@@ -220,7 +170,7 @@ static void __init at73c213_set_clk(stru
+ 	}
+ 
+ 	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+-	info->dac_clk = gclk;
++	at73c213_data.dac_clk = gclk;
+ 
+ err_set_clk:
+ 	clk_put(pll);
+@@ -229,12 +179,16 @@ err_pll:
+ err_gclk:
+ 	return;
+ }
+-#endif
+-#endif
++#else
++static void __init atstk1002_setup_extdac(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
+ 
+ void __init setup_board(void)
+ {
+-#ifdef	CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
++#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+ 	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
+ #else
+ 	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
+@@ -271,7 +225,7 @@ static int __init atstk1002_init(void)
+ 
+ 	at32_add_system_devices();
+ 
+-#ifdef	CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
++#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+ 	at32_add_device_usart(1);
+ #else
+ 	at32_add_device_usart(0);
+@@ -281,12 +235,16 @@ static int __init atstk1002_init(void)
+ #ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
+ 	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+ #endif
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
+ 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+ #endif
+-#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
+ 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
+ #endif
++	at32_add_device_twi(0);
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_add_device_mci(0, NULL);
++#endif
+ #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
+ 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
+ #else
+@@ -294,17 +252,18 @@ static int __init atstk1002_init(void)
+ 			     fbmem_start, fbmem_size);
+ #endif
+ 	at32_add_device_usba(0, NULL);
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++	at32_add_device_ac97c(0);
++#else
++	at32_add_device_abdac(0);
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
+ 	at32_add_device_ssc(0, ATMEL_SSC_TX);
+ #endif
++	at32_add_device_cf(0, 2, &cf0_data);
+ 
+-	setup_j2_leds();
+-
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
+-	at73c213_set_clk(&at73c213_data);
+-#endif
+-#endif
++	atstk1000_setup_j2_leds();
++	atstk1002_setup_extdac();
+ 
+ 	return 0;
+ }
+diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/atstk1003.c linux-avr32/arch/avr32/boards/atstk1000/atstk1003.c
+--- linux-2.6.24/arch/avr32/boards/atstk1000/atstk1003.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/boards/atstk1000/atstk1003.c	2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,181 @@
++/*
++ * ATSTK1003 daughterboard-specific init code
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/string.h>
++#include <linux/types.h>
++
++#include <linux/spi/at73c213.h>
++#include <linux/spi/spi.h>
++
++#include <asm/setup.h>
++
++#include <asm/arch/at32ap700x.h>
++#include <asm/arch/board.h>
++#include <asm/arch/init.h>
++#include <asm/arch/portmux.h>
++
++#include "atstk1000.h"
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static struct at73c213_board_info at73c213_data = {
++	.ssc_id		= 0,
++	.shortname	= "AVR32 STK1000 external DAC",
++};
++#endif
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++static struct spi_board_info spi0_board_info[] __initdata = {
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++	{
++		/* AT73C213 */
++		.modalias	= "at73c213",
++		.max_speed_hz	= 200000,
++		.chip_select	= 0,
++		.mode		= SPI_MODE_1,
++		.platform_data	= &at73c213_data,
++	},
++#endif
++	/*
++	 * We can control the LTV350QV LCD panel, but it isn't much
++	 * point since we don't have an LCD controller...
++	 */
++};
++#endif
++
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++static struct spi_board_info spi1_board_info[] __initdata = { {
++	/* patch in custom entries here */
++} };
++#endif
++
++static struct cf_platform_data __initdata cf0_data = {
++#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
++	.detect_pin	= CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
++	.reset_pin	= CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
++#else
++	.detect_pin	= GPIO_PIN_NONE,
++	.reset_pin	= GPIO_PIN_NONE,
++#endif
++	.vcc_pin	= GPIO_PIN_NONE,
++	.ready_pin	= GPIO_PIN_PB(27),
++	.cs		= 4,
++};
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static void __init atstk1003_setup_extdac(void)
++{
++	struct clk *gclk;
++	struct clk *pll;
++
++	gclk = clk_get(NULL, "gclk0");
++	if (IS_ERR(gclk))
++		goto err_gclk;
++	pll = clk_get(NULL, "pll0");
++	if (IS_ERR(pll))
++		goto err_pll;
++
++	if (clk_set_parent(gclk, pll)) {
++		pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
++		goto err_set_clk;
++	}
++
++	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++	at73c213_data.dac_clk = gclk;
++
++err_set_clk:
++	clk_put(pll);
++err_pll:
++	clk_put(gclk);
++err_gclk:
++	return;
++}
++#else
++static void __init atstk1003_setup_extdac(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
++
++void __init setup_board(void)
++{
++#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
++#else
++	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
++#endif
++	/* USART 2/unused: expansion connector */
++	at32_map_usart(3, 2);	/* USART 3/C: /dev/ttyS2, DB9 */
++
++	at32_setup_serial_console(0);
++}
++
++static int __init atstk1003_init(void)
++{
++	/*
++	 * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
++	 * SDRAM-specific pins so that nobody messes with them.
++	 */
++	at32_reserve_pin(GPIO_PIN_PE(0));	/* DATA[16]	*/
++	at32_reserve_pin(GPIO_PIN_PE(1));	/* DATA[17]	*/
++	at32_reserve_pin(GPIO_PIN_PE(2));	/* DATA[18]	*/
++	at32_reserve_pin(GPIO_PIN_PE(3));	/* DATA[19]	*/
++	at32_reserve_pin(GPIO_PIN_PE(4));	/* DATA[20]	*/
++	at32_reserve_pin(GPIO_PIN_PE(5));	/* DATA[21]	*/
++	at32_reserve_pin(GPIO_PIN_PE(6));	/* DATA[22]	*/
++	at32_reserve_pin(GPIO_PIN_PE(7));	/* DATA[23]	*/
++	at32_reserve_pin(GPIO_PIN_PE(8));	/* DATA[24]	*/
++	at32_reserve_pin(GPIO_PIN_PE(9));	/* DATA[25]	*/
++	at32_reserve_pin(GPIO_PIN_PE(10));	/* DATA[26]	*/
++	at32_reserve_pin(GPIO_PIN_PE(11));	/* DATA[27]	*/
++	at32_reserve_pin(GPIO_PIN_PE(12));	/* DATA[28]	*/
++	at32_reserve_pin(GPIO_PIN_PE(13));	/* DATA[29]	*/
++	at32_reserve_pin(GPIO_PIN_PE(14));	/* DATA[30]	*/
++	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
++	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
++
++	at32_add_system_devices();
++
++#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_add_device_usart(1);
++#else
++	at32_add_device_usart(0);
++#endif
++	at32_add_device_usart(2);
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++#endif
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_add_device_mci(0, NULL);
++#endif
++	at32_add_device_usba(0, NULL);
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++	at32_add_device_ac97c(0);
++#else
++	at32_add_device_abdac(0);
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
++	at32_add_device_ssc(0, ATMEL_SSC_TX);
++#endif
++	at32_add_device_cf(0, 2, &cf0_data);
++
++	atstk1000_setup_j2_leds();
++	atstk1003_setup_extdac();
++
++	return 0;
++}
++postcore_initcall(atstk1003_init);
+diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/atstk1004.c linux-avr32/arch/avr32/boards/atstk1000/atstk1004.c
+--- linux-2.6.24/arch/avr32/boards/atstk1000/atstk1004.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/boards/atstk1000/atstk1004.c	2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,152 @@
++/*
++ * ATSTK1003 daughterboard-specific init code
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/string.h>
++#include <linux/types.h>
++
++#include <linux/spi/at73c213.h>
++#include <linux/spi/spi.h>
++
++#include <video/atmel_lcdc.h>
++
++#include <asm/setup.h>
++
++#include <asm/arch/at32ap700x.h>
++#include <asm/arch/board.h>
++#include <asm/arch/init.h>
++#include <asm/arch/portmux.h>
++
++#include "atstk1000.h"
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static struct at73c213_board_info at73c213_data = {
++	.ssc_id		= 0,
++	.shortname	= "AVR32 STK1000 external DAC",
++};
++#endif
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++static struct spi_board_info spi0_board_info[] __initdata = {
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++	{
++		/* AT73C213 */
++		.modalias	= "at73c213",
++		.max_speed_hz	= 200000,
++		.chip_select	= 0,
++		.mode		= SPI_MODE_1,
++		.platform_data	= &at73c213_data,
++	},
++#endif
++	{
++		/* QVGA display */
++		.modalias	= "ltv350qv",
++		.max_speed_hz	= 16000000,
++		.chip_select	= 1,
++		.mode		= SPI_MODE_3,
++	},
++};
++#endif
++
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++static struct spi_board_info spi1_board_info[] __initdata = { {
++	/* patch in custom entries here */
++} };
++#endif
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static void __init atstk1004_setup_extdac(void)
++{
++	struct clk *gclk;
++	struct clk *pll;
++
++	gclk = clk_get(NULL, "gclk0");
++	if (IS_ERR(gclk))
++		goto err_gclk;
++	pll = clk_get(NULL, "pll0");
++	if (IS_ERR(pll))
++		goto err_pll;
++
++	if (clk_set_parent(gclk, pll)) {
++		pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
++		goto err_set_clk;
++	}
++
++	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++	at73c213_data.dac_clk = gclk;
++
++err_set_clk:
++	clk_put(pll);
++err_pll:
++	clk_put(gclk);
++err_gclk:
++	return;
++}
++#else
++static void __init atstk1004_setup_extdac(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
++
++void __init setup_board(void)
++{
++#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
++#else
++	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
++#endif
++	/* USART 2/unused: expansion connector */
++	at32_map_usart(3, 2);	/* USART 3/C: /dev/ttyS2, DB9 */
++
++	at32_setup_serial_console(0);
++}
++
++static int __init atstk1004_init(void)
++{
++	at32_add_system_devices();
++
++#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_add_device_usart(1);
++#else
++	at32_add_device_usart(0);
++#endif
++	at32_add_device_usart(2);
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++#endif
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++	at32_add_device_mci(0, NULL);
++#endif
++	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
++			     fbmem_start, fbmem_size);
++	at32_add_device_usba(0, NULL);
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++	at32_add_device_ac97c(0);
++#else
++	at32_add_device_abdac(0);
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
++	at32_add_device_ssc(0, ATMEL_SSC_TX);
++#endif
++
++	atstk1000_setup_j2_leds();
++	atstk1004_setup_extdac();
++
++	return 0;
++}
++postcore_initcall(atstk1004_init);
+diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/Kconfig linux-avr32/arch/avr32/boards/atstk1000/Kconfig
+--- linux-2.6.24/arch/avr32/boards/atstk1000/Kconfig	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/boards/atstk1000/Kconfig	2008-02-01 14:51:35.000000000 -0500
+@@ -1,34 +1,53 @@
+ # STK1000 customization
+ 
+-if BOARD_ATSTK1002
++if BOARD_ATSTK1000
+ 
+-config BOARD_ATSTK1002_CUSTOM
+-	bool "Non-default STK-1002 jumper settings"
++choice
++	prompt "ATSTK1000 CPU daughterboard type"
++	default BOARD_ATSTK1002
++
++config BOARD_ATSTK1002
++	bool "ATSTK1002"
++	select CPU_AT32AP7000
++
++config BOARD_ATSTK1003
++	bool "ATSTK1003"
++	select CPU_AT32AP7001
++
++config BOARD_ATSTK1004
++	bool "ATSTK1004"
++	select CPU_AT32AP7002
++
++endchoice
++
++
++config BOARD_ATSTK100X_CUSTOM
++	bool "Non-default STK1002/STK1003/STK1004 jumper settings"
+ 	help
+ 	  You will normally leave the jumpers on the CPU card at their
+ 	  default settings.  If you need to use certain peripherals,
+ 	  you will need to change some of those jumpers.
+ 
+-if BOARD_ATSTK1002_CUSTOM
++if BOARD_ATSTK100X_CUSTOM
+ 
+-config BOARD_ATSTK1002_SW1_CUSTOM
++config BOARD_ATSTK100X_SW1_CUSTOM
+ 	bool "SW1: use SSC1 (not SPI0)"
+ 	help
+ 	  This also prevents using the external DAC as an audio interface,
+ 	  and means you can't initialize the on-board QVGA display.
+ 
+-config BOARD_ATSTK1002_SW2_CUSTOM
++config BOARD_ATSTK100X_SW2_CUSTOM
+ 	bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
+ 	help
+ 	  If you change this you'll want an updated boot loader putting
+ 	  the console on UART-C not UART-A.
+ 
+-config BOARD_ATSTK1002_SW3_CUSTOM
++config BOARD_ATSTK100X_SW3_CUSTOM
+ 	bool "SW3: use TIMER1 (not SSC0 and GCLK)"
+ 	help
+ 	  This also prevents using the external DAC as an audio interface.
+ 
+-config BOARD_ATSTK1002_SW4_CUSTOM
++config BOARD_ATSTK100X_SW4_CUSTOM
+ 	bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
+ 	help
+ 	  To use the camera interface you'll need a custom card (on the
+@@ -36,27 +55,29 @@ config BOARD_ATSTK1002_SW4_CUSTOM
+ 
+ config BOARD_ATSTK1002_SW5_CUSTOM
+ 	bool "SW5: use MACB1 (not LCDC)"
++	depends on BOARD_ATSTK1002
+ 
+ config BOARD_ATSTK1002_SW6_CUSTOM
+ 	bool "SW6: more GPIOs (not MACB0)"
++	depends on BOARD_ATSTK1002
+ 
+ endif	# custom
+ 
+-config BOARD_ATSTK1002_SPI1
++config BOARD_ATSTK100X_SPI1
+ 	bool "Configure SPI1 controller"
+-	depends on !BOARD_ATSTK1002_SW4_CUSTOM
++	depends on !BOARD_ATSTK100X_SW4_CUSTOM
+ 	help
+ 	  All the signals for the second SPI controller are available on
+ 	  GPIO lines and accessed through the J1 jumper block.  Say "y"
+ 	  here to configure that SPI controller.
+ 
+-config BOARD_ATSTK1002_J2_LED
++config BOARD_ATSTK1000_J2_LED
+ 	bool
+-	default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
++	default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB
+ 
+ choice
+ 	prompt "LEDs connected to J2:"
+-	depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM
++	depends on LEDS_GPIO && !BOARD_ATSTK100X_SW4_CUSTOM
+ 	optional
+ 	help
+ 	  Select this if you have jumpered the J2 jumper block to the
+@@ -64,16 +85,64 @@ choice
+ 	  IDC cable.  A default "heartbeat" trigger is provided, but
+ 	  you can of course override this.
+ 
+-config BOARD_ATSTK1002_J2_LED8
++config BOARD_ATSTK1000_J2_LED8
+ 	bool "LED0..LED7"
+ 	help
+ 	  Select this if J2 is jumpered to LED0..LED7 amber leds.
+ 
+-config BOARD_ATSTK1002_J2_RGB
++config BOARD_ATSTK1000_J2_RGB
+ 	bool "RGB leds"
+ 	help
+ 	  Select this if J2 is jumpered to the RGB leds.
+ 
+ endchoice
+ 
+-endif	# stk 1002
++config BOARD_ATSTK1000_EXTDAC
++	bool
++	depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
++	default y
++
++config BOARD_ATSTK100X_ENABLE_AC97
++	bool "Use AC97C instead of ABDAC"
++	help
++	  Select this if you want to use the built-in AC97 controller
++	  instead of the built-in Audio Bitstream DAC. These share
++	  the same I/O pins on the AP7000, so both can't be enabled
++	  at the same time.
++
++	  Note that the STK1000 kit doesn't ship with an AC97 codec on
++	  board, so say N unless you've got an expansion board with an
++	  AC97 codec on it that you want to use.
++
++config BOARD_ATSTK1000_CF_HACKS
++	bool "ATSTK1000 CompactFlash hacks"
++	depends on !BOARD_ATSTK100X_SW4_CUSTOM
++	help
++	  Select this if you have re-routed the CompactFlash RESET and
++	  CD signals to GPIOs on your STK1000. This is necessary for
++	  reset and card detection to work properly, although some CF
++	  cards may be able to cope without reset.
++
++config BOARD_ATSTK1000_CF_RESET_PIN
++	hex "CompactFlash RESET pin"
++	default 0x30
++	depends on BOARD_ATSTK1000_CF_HACKS
++	help
++	  Select which GPIO pin to use for the CompactFlash RESET
++	  signal. This is specified as a hexadecimal number and should
++	  be defined as 0x20 * gpio_port + pin.
++
++	  The default is 0x30, which is pin 16 on PIOB, aka GPIO14.
++
++config BOARD_ATSTK1000_CF_DETECT_PIN
++	hex "CompactFlash DETECT pin"
++	default 0x3e
++	depends on BOARD_ATSTK1000_CF_HACKS
++	help
++	  Select which GPIO pin to use for the CompactFlash CD
++	  signal. This is specified as a hexadecimal number and should
++	  be defined as 0x20 * gpio_port + pin.
++
++	  The default is 0x3e, which is pin 30 on PIOB, aka GPIO15.
++
++endif	# stk 1000
+diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/Makefile linux-avr32/arch/avr32/boards/atstk1000/Makefile
+--- linux-2.6.24/arch/avr32/boards/atstk1000/Makefile	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/boards/atstk1000/Makefile	2008-02-01 14:51:35.000000000 -0500
+@@ -1,2 +1,4 @@
+ obj-y				+= setup.o flash.o
+ obj-$(CONFIG_BOARD_ATSTK1002)	+= atstk1002.o
++obj-$(CONFIG_BOARD_ATSTK1003)	+= atstk1003.o
++obj-$(CONFIG_BOARD_ATSTK1004)	+= atstk1004.o
+diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/setup.c linux-avr32/arch/avr32/boards/atstk1000/setup.c
+--- linux-2.6.24/arch/avr32/boards/atstk1000/setup.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/boards/atstk1000/setup.c	2008-02-01 14:51:35.000000000 -0500
+@@ -10,13 +10,17 @@
+ #include <linux/bootmem.h>
+ #include <linux/fb.h>
+ #include <linux/init.h>
++#include <linux/platform_device.h>
+ #include <linux/types.h>
+ #include <linux/linkage.h>
+ 
+ #include <video/atmel_lcdc.h>
+ 
+ #include <asm/setup.h>
++
++#include <asm/arch/at32ap700x.h>
+ #include <asm/arch/board.h>
++#include <asm/arch/portmux.h>
+ 
+ #include "atstk1000.h"
+ 
+@@ -61,3 +65,63 @@ struct atmel_lcdfb_info __initdata atstk
+ 	.default_monspecs	= &atstk1000_default_monspecs,
+ 	.guard_time		= 2,
+ };
++
++#ifdef CONFIG_BOARD_ATSTK1000_J2_LED
++#include <linux/leds.h>
++
++static struct gpio_led stk1000_j2_led[] = {
++#ifdef CONFIG_BOARD_ATSTK1000_J2_LED8
++#define LEDSTRING "J2 jumpered to LED8"
++	{ .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
++	{ .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
++	{ .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
++	{ .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
++	{ .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
++	{ .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
++	{ .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
++	{ .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
++			.default_trigger = "heartbeat", },
++#else	/* RGB */
++#define LEDSTRING "J2 jumpered to RGB LEDs"
++	{ .name = "r1:red",     .gpio = GPIO_PIN_PB( 8), },
++	{ .name = "g1:green",   .gpio = GPIO_PIN_PB(10), },
++	{ .name = "b1:blue",    .gpio = GPIO_PIN_PB(14), },
++
++	{ .name = "r2:red",     .gpio = GPIO_PIN_PB( 9),
++			.default_trigger = "heartbeat", },
++	{ .name = "g2:green",   .gpio = GPIO_PIN_PB(13), },
++	{ .name = "b2:blue",    .gpio = GPIO_PIN_PB(15),
++			.default_trigger = "heartbeat", },
++	/* PB16, PB30 unused */
++#endif
++};
++
++static struct gpio_led_platform_data stk1000_j2_led_data = {
++	.num_leds	= ARRAY_SIZE(stk1000_j2_led),
++	.leds		= stk1000_j2_led,
++};
++
++static struct platform_device stk1000_j2_led_dev = {
++	.name		= "leds-gpio",
++	.id		= 2,	/* gpio block J2 */
++	.dev		= {
++		.platform_data	= &stk1000_j2_led_data,
++	},
++};
++
++void __init atstk1000_setup_j2_leds(void)
++{
++	unsigned	i;
++
++	for (i = 0; i < ARRAY_SIZE(stk1000_j2_led); i++)
++		at32_select_gpio(stk1000_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
++
++	printk("STK1000: " LEDSTRING "\n");
++	platform_device_register(&stk1000_j2_led_dev);
++}
++#else /* CONFIG_BOARD_ATSTK1000_J2_LED */
++void __init atstk1000_setup_j2_leds(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_J2_LED */
+diff -Nrup linux-2.6.24/arch/avr32/configs/atngw100_defconfig linux-avr32/arch/avr32/configs/atngw100_defconfig
+--- linux-2.6.24/arch/avr32/configs/atngw100_defconfig	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/configs/atngw100_defconfig	2008-02-01 14:51:35.000000000 -0500
+@@ -1,46 +1,51 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.22-rc5
+-# Sat Jun 23 15:40:05 2007
++# Linux kernel version: 2.6.24-rc7
++# Wed Jan  9 23:20:41 2008
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+ CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
+ CONFIG_GENERIC_TIME=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+ # CONFIG_ARCH_HAS_ILOG2_U32 is not set
+ # CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_ARCH_SUPPORTS_OPROFILE=y
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
+ CONFIG_GENERIC_BUG=y
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+ 
+ #
+-# Code maturity level options
++# General setup
+ #
+ CONFIG_EXPERIMENTAL=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+-
+-#
+-# General setup
+-#
+ CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SWAP=y
+ CONFIG_SYSVIPC=y
+-# CONFIG_IPC_NS is not set
+ CONFIG_SYSVIPC_SYSCTL=y
+ CONFIG_POSIX_MQUEUE=y
+ CONFIG_BSD_PROCESS_ACCT=y
+ CONFIG_BSD_PROCESS_ACCT_V3=y
+ # CONFIG_TASKSTATS is not set
+-# CONFIG_UTS_NS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
+ # CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ # CONFIG_RELAY is not set
+ CONFIG_BLK_DEV_INITRD=y
+@@ -61,35 +66,28 @@ CONFIG_FUTEX=y
+ CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+ CONFIG_VM_EVENT_COUNTERS=y
+-# CONFIG_SLUB_DEBUG is not set
++CONFIG_SLUB_DEBUG=y
+ # CONFIG_SLAB is not set
+ CONFIG_SLUB=y
+ # CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=1
+-
+-#
+-# Loadable module support
+-#
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+ CONFIG_MODULE_FORCE_UNLOAD=y
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+ CONFIG_KMOD=y
+-
+-#
+-# Block layer
+-#
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+ # CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
+ 
+ #
+ # IO Schedulers
+@@ -111,6 +109,7 @@ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
+ CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
+ CONFIG_CPU_AT32AP7000=y
+ # CONFIG_BOARD_ATSTK1000 is not set
+ CONFIG_BOARD_ATNGW100=y
+@@ -119,9 +118,9 @@ CONFIG_LOADER_U_BOOT=y
+ #
+ # Atmel AVR32 AP options
+ #
+-# CONFIG_AP7000_32_BIT_SMC is not set
+-CONFIG_AP7000_16_BIT_SMC=y
+-# CONFIG_AP7000_8_BIT_SMC is not set
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
+ CONFIG_LOAD_ADDRESS=0x10000000
+ CONFIG_ENTRY_ADDRESS=0x90000000
+ CONFIG_PHYS_OFFSET=0x10000000
+@@ -141,9 +140,11 @@ CONFIG_FLATMEM_MANUAL=y
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+ # CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+ # CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
+ # CONFIG_OWNERSHIP_TRACE is not set
+ # CONFIG_HZ_100 is not set
+ CONFIG_HZ_250=y
+@@ -153,13 +154,31 @@ CONFIG_HZ=250
+ CONFIG_CMDLINE=""
+ 
+ #
+-# Bus options
++# Power management options
+ #
+-# CONFIG_ARCH_SUPPORTS_MSI is not set
+ 
+ #
+-# PCCARD (PCMCIA/CardBus) support
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
+ #
++# CONFIG_ARCH_SUPPORTS_MSI is not set
+ # CONFIG_PCCARD is not set
+ 
+ #
+@@ -213,6 +232,7 @@ CONFIG_INET_TUNNEL=y
+ CONFIG_INET_XFRM_MODE_TRANSPORT=y
+ CONFIG_INET_XFRM_MODE_TUNNEL=y
+ CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
+ CONFIG_INET_DIAG=y
+ CONFIG_INET_TCP_DIAG=y
+ # CONFIG_TCP_CONG_ADVANCED is not set
+@@ -240,6 +260,7 @@ CONFIG_IPV6_SIT=y
+ # CONFIG_NETWORK_SECMARK is not set
+ CONFIG_NETFILTER=y
+ # CONFIG_NETFILTER_DEBUG is not set
++CONFIG_BRIDGE_NETFILTER=y
+ 
+ #
+ # Core Netfilter Configuration
+@@ -252,6 +273,7 @@ CONFIG_NF_CONNTRACK_MARK=y
+ # CONFIG_NF_CONNTRACK_EVENTS is not set
+ CONFIG_NF_CT_PROTO_GRE=m
+ # CONFIG_NF_CT_PROTO_SCTP is not set
++# CONFIG_NF_CT_PROTO_UDPLITE is not set
+ CONFIG_NF_CONNTRACK_AMANDA=m
+ CONFIG_NF_CONNTRACK_FTP=m
+ CONFIG_NF_CONNTRACK_H323=m
+@@ -269,9 +291,11 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
+ CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+ CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+ # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
++# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+ CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+ CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
++# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+ CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+ # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+@@ -284,6 +308,7 @@ CONFIG_NETFILTER_XT_MATCH_MAC=m
+ CONFIG_NETFILTER_XT_MATCH_MARK=m
+ CONFIG_NETFILTER_XT_MATCH_POLICY=m
+ CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+ CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+ CONFIG_NETFILTER_XT_MATCH_REALM=m
+@@ -292,6 +317,8 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m
+ CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+ CONFIG_NETFILTER_XT_MATCH_STRING=m
+ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
++# CONFIG_NETFILTER_XT_MATCH_TIME is not set
++# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+ CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+ 
+ #
+@@ -359,13 +386,19 @@ CONFIG_IP6_NF_TARGET_REJECT=m
+ CONFIG_IP6_NF_MANGLE=m
+ CONFIG_IP6_NF_TARGET_HL=m
+ CONFIG_IP6_NF_RAW=m
++
++#
++# Bridge: Netfilter Configuration
++#
++# CONFIG_BRIDGE_NF_EBTABLES is not set
+ # CONFIG_IP_DCCP is not set
+ # CONFIG_IP_SCTP is not set
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
++CONFIG_BRIDGE=m
+ CONFIG_VLAN_8021Q=m
+ # CONFIG_DECNET is not set
++CONFIG_LLC=m
+ # CONFIG_LLC2 is not set
+ # CONFIG_IPX is not set
+ # CONFIG_ATALK is not set
+@@ -373,10 +406,6 @@ CONFIG_VLAN_8021Q=m
+ # CONFIG_LAPB is not set
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+-
+-#
+-# QoS and/or fair queueing
+-#
+ # CONFIG_NET_SCHED is not set
+ CONFIG_NET_CLS_ROUTE=y
+ 
+@@ -384,6 +413,7 @@ CONFIG_NET_CLS_ROUTE=y
+ # Network testing
+ #
+ # CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_TCPPROBE is not set
+ # CONFIG_HAMRADIO is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+@@ -397,6 +427,7 @@ CONFIG_NET_CLS_ROUTE=y
+ # CONFIG_MAC80211 is not set
+ # CONFIG_IEEE80211 is not set
+ # CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
+ 
+ #
+ # Device Drivers
+@@ -405,16 +436,13 @@ CONFIG_NET_CLS_ROUTE=y
+ #
+ # Generic Driver Options
+ #
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+ CONFIG_STANDALONE=y
+ # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+-
+-#
+-# Connector - unified userspace <-> kernelspace linker
+-#
+ # CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
+ # CONFIG_MTD_DEBUG is not set
+@@ -434,6 +462,7 @@ CONFIG_MTD_BLOCK=y
+ # CONFIG_INFTL is not set
+ # CONFIG_RFD_FTL is not set
+ # CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
+ 
+ #
+ # RAM/ROM/Flash chip drivers
+@@ -493,20 +522,8 @@ CONFIG_MTD_DATAFLASH=y
+ # UBI - Unsorted block images
+ #
+ # CONFIG_MTD_UBI is not set
+-
+-#
+-# Parallel port support
+-#
+ # CONFIG_PARPORT is not set
+-
+-#
+-# Plug and Play support
+-#
+-# CONFIG_PNPACPI is not set
+-
+-#
+-# Block devices
+-#
++CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=m
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+@@ -517,11 +534,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-
+-#
+-# Misc devices
+-#
+-# CONFIG_BLINK is not set
++# CONFIG_MISC_DEVICES is not set
+ # CONFIG_IDE is not set
+ 
+ #
+@@ -529,30 +542,42 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ #
+ # CONFIG_RAID_ATTRS is not set
+ # CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
+ # CONFIG_SCSI_NETLINK is not set
+ # CONFIG_ATA is not set
+-
+-#
+-# Multi-device support (RAID and LVM)
+-#
+ # CONFIG_MD is not set
+-
+-#
+-# Network device support
+-#
+ CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
+ # CONFIG_DUMMY is not set
+ # CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
+ # CONFIG_EQUALIZER is not set
+ CONFIG_TUN=m
+-# CONFIG_PHYLIB is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
+ 
+ #
+-# Ethernet (10 or 100Mbit)
++# MII PHY device drivers
+ #
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
+ CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
++# CONFIG_MII is not set
+ CONFIG_MACB=y
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+ 
+@@ -571,21 +596,14 @@ CONFIG_PPP_DEFLATE=m
+ CONFIG_PPP_BSDCOMP=m
+ CONFIG_PPP_MPPE=m
+ CONFIG_PPPOE=m
++# CONFIG_PPPOL2TP is not set
+ # CONFIG_SLIP is not set
+ CONFIG_SLHC=m
+ # CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+-
+-#
+-# ISDN subsystem
+-#
+ # CONFIG_ISDN is not set
+-
+-#
+-# Telephony Support
+-#
+ # CONFIG_PHONE is not set
+ 
+ #
+@@ -620,23 +638,50 @@ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ CONFIG_UNIX98_PTYS=y
+ # CONFIG_LEGACY_PTYS is not set
+-
+-#
+-# IPMI
+-#
+ # CONFIG_IPMI_HANDLER is not set
+-# CONFIG_WATCHDOG is not set
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_RTC is not set
+ # CONFIG_GEN_RTC is not set
+ # CONFIG_R3964 is not set
+ # CONFIG_RAW_DRIVER is not set
+-
+-#
+-# TPM devices
+-#
+ # CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
+ 
+ #
+ # SPI support
+@@ -655,13 +700,25 @@ CONFIG_SPI_ATMEL=y
+ # SPI Protocol Masters
+ #
+ # CONFIG_SPI_AT25 is not set
+-# CONFIG_SPI_SPIDEV is not set
++CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
+ 
+ #
+-# Dallas's 1-wire bus
++# Watchdog Device Drivers
+ #
+-# CONFIG_W1 is not set
+-# CONFIG_HWMON is not set
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
+ 
+ #
+ # Multifunction device drivers
+@@ -678,23 +735,21 @@ CONFIG_SPI_ATMEL=y
+ #
+ # Graphics support
+ #
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
+ # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+ 
+ #
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
+-# CONFIG_VGASTATE is not set
+-# CONFIG_FB is not set
+ 
+ #
+ # Sound
+ #
+ # CONFIG_SOUND is not set
+-
+-#
+-# USB support
+-#
++CONFIG_USB_SUPPORT=y
+ # CONFIG_USB_ARCH_HAS_HCD is not set
+ # CONFIG_USB_ARCH_HAS_OHCI is not set
+ # CONFIG_USB_ARCH_HAS_EHCI is not set
+@@ -706,12 +761,47 @@ CONFIG_SPI_ATMEL=y
+ #
+ # USB Gadget Support
+ #
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=m
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=m
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
+ 
+ #
+-# LED devices
++# MMC/SD Host Controller Drivers
+ #
++CONFIG_MMC_SPI=m
+ CONFIG_NEW_LEDS=y
+ CONFIG_LEDS_CLASS=y
+ 
+@@ -726,53 +816,71 @@ CONFIG_LEDS_GPIO=y
+ CONFIG_LEDS_TRIGGERS=y
+ CONFIG_LEDS_TRIGGER_TIMER=y
+ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+-
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
+ 
+ #
+-# LED drivers
+-#
+-
+-#
+-# LED Triggers
+-#
+-
+-#
+-# InfiniBand support
++# RTC interfaces
+ #
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
+ 
+ #
+-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
++# I2C RTC drivers
+ #
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
+ 
+ #
+-# Real Time Clock
++# SPI RTC drivers
+ #
+-# CONFIG_RTC_CLASS is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
+ 
+ #
+-# DMA Engine support
++# Platform RTC drivers
+ #
+-# CONFIG_DMA_ENGINE is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
+ 
+ #
+-# DMA Clients
++# on-CPU RTC drivers
+ #
++CONFIG_RTC_DRV_AT32AP700X=y
+ 
+ #
+-# DMA Devices
++# Userspace I/O
+ #
++# CONFIG_UIO is not set
+ 
+ #
+ # File systems
+ #
+-CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS=m
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS=m
+ # CONFIG_EXT3_FS_XATTR is not set
+ # CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-# CONFIG_JBD_DEBUG is not set
++CONFIG_JBD=m
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+@@ -781,7 +889,8 @@ CONFIG_JBD=y
+ # CONFIG_OCFS2_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_ROMFS_FS is not set
+-# CONFIG_INOTIFY is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
+ # CONFIG_DNOTIFY is not set
+ # CONFIG_AUTOFS_FS is not set
+@@ -814,8 +923,7 @@ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-CONFIG_RAMFS=y
+-CONFIG_CONFIGFS_FS=y
++CONFIG_CONFIGFS_FS=m
+ 
+ #
+ # Miscellaneous filesystems
+@@ -830,10 +938,12 @@ CONFIG_CONFIGFS_FS=y
+ CONFIG_JFFS2_FS=y
+ CONFIG_JFFS2_FS_DEBUG=0
+ CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+ # CONFIG_JFFS2_SUMMARY is not set
+ # CONFIG_JFFS2_FS_XATTR is not set
+ # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+ CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
+ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
+ # CONFIG_CRAMFS is not set
+@@ -842,19 +952,21 @@ CONFIG_JFFS2_RTIME=y
+ # CONFIG_QNX4FS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+-
+-#
+-# Network File Systems
+-#
++CONFIG_NETWORK_FILESYSTEMS=y
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
+ # CONFIG_NFS_V4 is not set
+ # CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
++CONFIG_NFSD=m
++CONFIG_NFSD_V3=y
++# CONFIG_NFSD_V3_ACL is not set
++# CONFIG_NFSD_V4 is not set
++CONFIG_NFSD_TCP=y
+ CONFIG_ROOT_NFS=y
+ CONFIG_LOCKD=y
+ CONFIG_LOCKD_V4=y
++CONFIG_EXPORTFS=m
+ CONFIG_NFS_COMMON=y
+ CONFIG_SUNRPC=y
+ # CONFIG_SUNRPC_BIND34 is not set
+@@ -871,23 +983,18 @@ CONFIG_CIFS=m
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
+ # CONFIG_AFS_FS is not set
+-# CONFIG_9P_FS is not set
+ 
+ #
+ # Partition Types
+ #
+ # CONFIG_PARTITION_ADVANCED is not set
+ CONFIG_MSDOS_PARTITION=y
+-
+-#
+-# Native Language Support
+-#
+-CONFIG_NLS=y
++CONFIG_NLS=m
+ CONFIG_NLS_DEFAULT="iso8859-1"
+-# CONFIG_NLS_CODEPAGE_437 is not set
++CONFIG_NLS_CODEPAGE_437=m
+ # CONFIG_NLS_CODEPAGE_737 is not set
+ # CONFIG_NLS_CODEPAGE_775 is not set
+-CONFIG_NLS_CODEPAGE_850=y
++CONFIG_NLS_CODEPAGE_850=m
+ # CONFIG_NLS_CODEPAGE_852 is not set
+ # CONFIG_NLS_CODEPAGE_855 is not set
+ # CONFIG_NLS_CODEPAGE_857 is not set
+@@ -908,7 +1015,7 @@ CONFIG_NLS_CODEPAGE_850=y
+ # CONFIG_NLS_CODEPAGE_1250 is not set
+ # CONFIG_NLS_CODEPAGE_1251 is not set
+ # CONFIG_NLS_ASCII is not set
+-CONFIG_NLS_ISO8859_1=y
++CONFIG_NLS_ISO8859_1=m
+ # CONFIG_NLS_ISO8859_2 is not set
+ # CONFIG_NLS_ISO8859_3 is not set
+ # CONFIG_NLS_ISO8859_4 is not set
+@@ -921,18 +1028,19 @@ CONFIG_NLS_ISO8859_1=y
+ # CONFIG_NLS_ISO8859_15 is not set
+ # CONFIG_NLS_KOI8_R is not set
+ # CONFIG_NLS_KOI8_U is not set
+-CONFIG_NLS_UTF8=y
+-
+-#
+-# Distributed Lock Manager
+-#
++CONFIG_NLS_UTF8=m
+ # CONFIG_DLM is not set
++CONFIG_INSTRUMENTATION=y
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++CONFIG_KPROBES=y
++# CONFIG_MARKERS is not set
+ 
+ #
+ # Kernel hacking
+ #
+-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ # CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
+ CONFIG_ENABLE_MUST_CHECK=y
+ CONFIG_MAGIC_SYSRQ=y
+ # CONFIG_UNUSED_SYMBOLS is not set
+@@ -941,12 +1049,17 @@ CONFIG_MAGIC_SYSRQ=y
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+ # CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+@@ -954,21 +1067,21 @@ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+ # CONFIG_DEBUG_VM is not set
+ # CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
+ CONFIG_FRAME_POINTER=y
+ # CONFIG_FORCED_INLINING is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_LKDTM is not set
+ # CONFIG_FAULT_INJECTION is not set
+-# CONFIG_KPROBES is not set
++# CONFIG_SAMPLES is not set
+ 
+ #
+ # Security options
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-
+-#
+-# Cryptographic options
+-#
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ CONFIG_CRYPTO=y
+ CONFIG_CRYPTO_ALGAPI=y
+ CONFIG_CRYPTO_BLKCIPHER=y
+@@ -989,6 +1102,7 @@ CONFIG_CRYPTO_ECB=m
+ CONFIG_CRYPTO_CBC=y
+ CONFIG_CRYPTO_PCBC=m
+ # CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
+ # CONFIG_CRYPTO_CRYPTD is not set
+ CONFIG_CRYPTO_DES=y
+ # CONFIG_CRYPTO_FCRYPT is not set
+@@ -1002,15 +1116,14 @@ CONFIG_CRYPTO_DES=y
+ CONFIG_CRYPTO_ARC4=m
+ # CONFIG_CRYPTO_KHAZAD is not set
+ # CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
+ CONFIG_CRYPTO_DEFLATE=y
+ # CONFIG_CRYPTO_MICHAEL_MIC is not set
+ # CONFIG_CRYPTO_CRC32C is not set
+ # CONFIG_CRYPTO_CAMELLIA is not set
+ # CONFIG_CRYPTO_TEST is not set
+-
+-#
+-# Hardware crypto devices
+-#
++# CONFIG_CRYPTO_AUTHENC is not set
++CONFIG_CRYPTO_HW=y
+ 
+ #
+ # Library routines
+@@ -1018,8 +1131,9 @@ CONFIG_CRYPTO_DEFLATE=y
+ CONFIG_BITREVERSE=y
+ CONFIG_CRC_CCITT=m
+ # CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC_ITU_T=m
+ CONFIG_CRC32=y
++CONFIG_CRC7=m
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_ZLIB_DEFLATE=y
+diff -Nrup linux-2.6.24/arch/avr32/configs/atstk1002_defconfig linux-avr32/arch/avr32/configs/atstk1002_defconfig
+--- linux-2.6.24/arch/avr32/configs/atstk1002_defconfig	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/configs/atstk1002_defconfig	2008-02-01 14:51:35.000000000 -0500
+@@ -1,48 +1,48 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.22-rc5
+-# Sat Jun 23 15:32:08 2007
++# Linux kernel version: 2.6.24-rc7
++# Wed Jan  9 23:07:43 2008
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+ CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
+ CONFIG_GENERIC_TIME=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+ # CONFIG_ARCH_HAS_ILOG2_U32 is not set
+ # CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_ARCH_SUPPORTS_OPROFILE=y
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
+ CONFIG_GENERIC_BUG=y
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+ 
+ #
+-# Code maturity level options
++# General setup
+ #
+ CONFIG_EXPERIMENTAL=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+-
+-#
+-# General setup
+-#
+ CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SWAP=y
+ CONFIG_SYSVIPC=y
+-# CONFIG_IPC_NS is not set
+ CONFIG_SYSVIPC_SYSCTL=y
+ CONFIG_POSIX_MQUEUE=y
+-CONFIG_BSD_PROCESS_ACCT=y
+-CONFIG_BSD_PROCESS_ACCT_V3=y
+-CONFIG_TASKSTATS=y
+-CONFIG_TASK_DELAY_ACCT=y
+-# CONFIG_TASK_XACCT is not set
+-# CONFIG_UTS_NS is not set
+-CONFIG_AUDIT=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++# CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++# CONFIG_FAIR_GROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ CONFIG_RELAY=y
+ CONFIG_BLK_DEV_INITRD=y
+@@ -63,35 +63,28 @@ CONFIG_FUTEX=y
+ CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+ CONFIG_VM_EVENT_COUNTERS=y
+-# CONFIG_SLUB_DEBUG is not set
++CONFIG_SLUB_DEBUG=y
+ # CONFIG_SLAB is not set
+ CONFIG_SLUB=y
+ # CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=1
+-
+-#
+-# Loadable module support
+-#
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+ # CONFIG_MODULE_FORCE_UNLOAD is not set
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+ # CONFIG_KMOD is not set
+-
+-#
+-# Block layer
+-#
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+ # CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
+ 
+ #
+ # IO Schedulers
+@@ -99,12 +92,12 @@ CONFIG_BLOCK=y
+ CONFIG_IOSCHED_NOOP=y
+ # CONFIG_IOSCHED_AS is not set
+ # CONFIG_IOSCHED_DEADLINE is not set
+-# CONFIG_IOSCHED_CFQ is not set
++CONFIG_IOSCHED_CFQ=y
+ # CONFIG_DEFAULT_AS is not set
+ # CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-CONFIG_DEFAULT_NOOP=y
+-CONFIG_DEFAULT_IOSCHED="noop"
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
+ 
+ #
+ # System Type and features
+@@ -113,18 +106,27 @@ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
+ CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
+ CONFIG_CPU_AT32AP7000=y
+-CONFIG_BOARD_ATSTK1002=y
+ CONFIG_BOARD_ATSTK1000=y
+ # CONFIG_BOARD_ATNGW100 is not set
++CONFIG_BOARD_ATSTK1002=y
++# CONFIG_BOARD_ATSTK1003 is not set
++# CONFIG_BOARD_ATSTK1004 is not set
++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
++# CONFIG_BOARD_ATSTK100X_SPI1 is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
++# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
++CONFIG_BOARD_ATSTK1000_EXTDAC=y
+ CONFIG_LOADER_U_BOOT=y
+ 
+ #
+ # Atmel AVR32 AP options
+ #
+-# CONFIG_AP7000_32_BIT_SMC is not set
+-CONFIG_AP7000_16_BIT_SMC=y
+-# CONFIG_AP7000_8_BIT_SMC is not set
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
+ CONFIG_LOAD_ADDRESS=0x10000000
+ CONFIG_ENTRY_ADDRESS=0x90000000
+ CONFIG_PHYS_OFFSET=0x10000000
+@@ -144,9 +146,11 @@ CONFIG_FLATMEM_MANUAL=y
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+ # CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+ # CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
+ # CONFIG_OWNERSHIP_TRACE is not set
+ # CONFIG_HZ_100 is not set
+ CONFIG_HZ_250=y
+@@ -156,13 +160,31 @@ CONFIG_HZ=250
+ CONFIG_CMDLINE=""
+ 
+ #
+-# Bus options
++# Power management options
+ #
+-# CONFIG_ARCH_SUPPORTS_MSI is not set
+ 
+ #
+-# PCCARD (PCMCIA/CardBus) support
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
+ #
++# CONFIG_ARCH_SUPPORTS_MSI is not set
+ # CONFIG_PCCARD is not set
+ 
+ #
+@@ -182,7 +204,12 @@ CONFIG_NET=y
+ CONFIG_PACKET=y
+ CONFIG_PACKET_MMAP=y
+ CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=m
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++CONFIG_NET_KEY=m
++# CONFIG_NET_KEY_MIGRATE is not set
+ CONFIG_INET=y
+ # CONFIG_IP_MULTICAST is not set
+ # CONFIG_IP_ADVANCED_ROUTER is not set
+@@ -191,36 +218,52 @@ CONFIG_IP_PNP=y
+ CONFIG_IP_PNP_DHCP=y
+ # CONFIG_IP_PNP_BOOTP is not set
+ # CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
++CONFIG_NET_IPIP=m
++CONFIG_NET_IPGRE=m
+ # CONFIG_ARPD is not set
+ # CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
+ # CONFIG_INET_IPCOMP is not set
+ # CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
++CONFIG_INET_TUNNEL=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
++# CONFIG_INET_LRO is not set
+ CONFIG_INET_DIAG=y
+ CONFIG_INET_TCP_DIAG=y
+ # CONFIG_TCP_CONG_ADVANCED is not set
+ CONFIG_TCP_CONG_CUBIC=y
+ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
++CONFIG_IPV6=m
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++# CONFIG_IPV6_MIP6 is not set
++CONFIG_INET6_XFRM_TUNNEL=m
++CONFIG_INET6_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_TUNNEL=m
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
+ # CONFIG_NETWORK_SECMARK is not set
+ # CONFIG_NETFILTER is not set
+ # CONFIG_IP_DCCP is not set
+ # CONFIG_IP_SCTP is not set
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
++CONFIG_BRIDGE=m
+ # CONFIG_VLAN_8021Q is not set
+ # CONFIG_DECNET is not set
++CONFIG_LLC=m
+ # CONFIG_LLC2 is not set
+ # CONFIG_IPX is not set
+ # CONFIG_ATALK is not set
+@@ -228,16 +271,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_LAPB is not set
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+-
+-#
+-# QoS and/or fair queueing
+-#
+ # CONFIG_NET_SCHED is not set
+ 
+ #
+ # Network testing
+ #
+ # CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_TCPPROBE is not set
+ # CONFIG_HAMRADIO is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+@@ -251,6 +291,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_MAC80211 is not set
+ # CONFIG_IEEE80211 is not set
+ # CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
+ 
+ #
+ # Device Drivers
+@@ -259,16 +300,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ #
+ # Generic Driver Options
+ #
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+ CONFIG_STANDALONE=y
+ # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+-
+-#
+-# Connector - unified userspace <-> kernelspace linker
+-#
+ # CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
+ # CONFIG_MTD_DEBUG is not set
+@@ -288,6 +326,7 @@ CONFIG_MTD_BLOCK=y
+ # CONFIG_INFTL is not set
+ # CONFIG_RFD_FTL is not set
+ # CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
+ 
+ #
+ # RAM/ROM/Flash chip drivers
+@@ -327,6 +366,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+ #
+ # Self-contained MTD device drivers
+ #
++CONFIG_MTD_DATAFLASH=m
++CONFIG_MTD_M25P80=m
+ # CONFIG_MTD_SLRAM is not set
+ # CONFIG_MTD_PHRAM is not set
+ # CONFIG_MTD_MTDRAM is not set
+@@ -345,20 +386,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+ # UBI - Unsorted block images
+ #
+ # CONFIG_MTD_UBI is not set
+-
+-#
+-# Parallel port support
+-#
+ # CONFIG_PARPORT is not set
+-
+-#
+-# Plug and Play support
+-#
+-# CONFIG_PNPACPI is not set
+-
+-#
+-# Block devices
+-#
++CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=m
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+@@ -369,42 +398,87 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-
+-#
+-# Misc devices
+-#
+-# CONFIG_BLINK is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=m
+ # CONFIG_IDE is not set
+ 
+ #
+ # SCSI device support
+ #
+ # CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
+ # CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
++# CONFIG_SCSI_PROC_FS is not set
+ 
+ #
+-# Multi-device support (RAID and LVM)
++# SCSI support type (disk, tape, CD-ROM)
+ #
+-# CONFIG_MD is not set
++CONFIG_BLK_DEV_SD=m
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++CONFIG_BLK_DEV_SR=m
++# CONFIG_BLK_DEV_SR_VENDOR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
+ 
+ #
+-# Network device support
++# SCSI Transports
+ #
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_ATA=m
++# CONFIG_ATA_NONSTANDARD is not set
++CONFIG_PATA_AT32=m
++# CONFIG_PATA_PLATFORM is not set
++# CONFIG_MD is not set
+ CONFIG_NETDEVICES=y
+-CONFIG_DUMMY=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
+ # CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
+ # CONFIG_EQUALIZER is not set
+ CONFIG_TUN=m
+-# CONFIG_PHYLIB is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
+ 
+ #
+-# Ethernet (10 or 100Mbit)
++# MII PHY device drivers
+ #
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
+ CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
++# CONFIG_MII is not set
+ CONFIG_MACB=y
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+ 
+@@ -423,27 +497,54 @@ CONFIG_PPP_DEFLATE=m
+ CONFIG_PPP_BSDCOMP=m
+ # CONFIG_PPP_MPPE is not set
+ # CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
+ # CONFIG_SLIP is not set
+ CONFIG_SLHC=m
+ # CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+-
+-#
+-# ISDN subsystem
+-#
+ # CONFIG_ISDN is not set
+-
+-#
+-# Telephony Support
+-#
+ # CONFIG_PHONE is not set
+ 
+ #
+ # Input device support
+ #
+-# CONFIG_INPUT is not set
++CONFIG_INPUT=m
++# CONFIG_INPUT_FF_MEMLESS is not set
++CONFIG_INPUT_POLLDEV=m
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++CONFIG_MOUSE_GPIO=m
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
+ 
+ #
+ # Hardware I/O ports
+@@ -472,35 +573,87 @@ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ CONFIG_UNIX98_PTYS=y
+ # CONFIG_LEGACY_PTYS is not set
+-
+-#
+-# IPMI
+-#
+ # CONFIG_IPMI_HANDLER is not set
+-# CONFIG_WATCHDOG is not set
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_RTC is not set
+ # CONFIG_GEN_RTC is not set
+ # CONFIG_R3964 is not set
+ # CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
+ 
+ #
+-# TPM devices
++# SPI support
+ #
+-# CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
+ 
+ #
+-# SPI support
++# SPI Master Controller Drivers
+ #
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
+ 
+ #
+-# Dallas's 1-wire bus
++# SPI Protocol Masters
+ #
++# CONFIG_SPI_AT25 is not set
++CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
+ # CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
+ 
+ #
+ # Multifunction device drivers
+@@ -517,23 +670,94 @@ CONFIG_UNIX98_PTYS=y
+ #
+ # Graphics support
+ #
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_VIRTUAL is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_LCD_LTV350QV=y
++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+ 
+ #
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
+-# CONFIG_VGASTATE is not set
+-# CONFIG_FB is not set
++# CONFIG_LOGO is not set
+ 
+ #
+ # Sound
+ #
+-# CONFIG_SOUND is not set
++CONFIG_SOUND=m
++
++#
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++# CONFIG_SND_SUPPORT_OLD_API is not set
++# CONFIG_SND_VERBOSE_PROCFS is not set
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++
++#
++# Generic devices
++#
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++
++#
++# SPI devices
++#
++CONFIG_SND_AT73C213=m
++CONFIG_SND_AT73C213_TARGET_BITRATE=48000
++
++#
++# System on Chip audio support
++#
++# CONFIG_SND_SOC is not set
++
++#
++# SoC Audio support for SuperH
++#
+ 
+ #
+-# USB support
++# Open Sound System
+ #
++# CONFIG_SOUND_PRIME is not set
++# CONFIG_HID_SUPPORT is not set
++CONFIG_USB_SUPPORT=y
+ # CONFIG_USB_ARCH_HAS_HCD is not set
+ # CONFIG_USB_ARCH_HAS_OHCI is not set
+ # CONFIG_USB_ARCH_HAS_EHCI is not set
+@@ -545,47 +769,116 @@ CONFIG_UNIX98_PTYS=y
+ #
+ # USB Gadget Support
+ #
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-
+-#
+-# LED devices
+-#
+-# CONFIG_NEW_LEDS is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++# CONFIG_USB_GADGET_DEBUG_FS is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=m
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=m
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_SPI=m
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=m
+ 
+ #
+ # LED drivers
+ #
++CONFIG_LEDS_GPIO=m
+ 
+ #
+ # LED Triggers
+ #
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=m
++CONFIG_LEDS_TRIGGER_HEARTBEAT=m
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
+ 
+ #
+-# InfiniBand support
++# RTC interfaces
+ #
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
+ 
+ #
+-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
++# I2C RTC drivers
+ #
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
+ 
+ #
+-# Real Time Clock
++# SPI RTC drivers
+ #
+-# CONFIG_RTC_CLASS is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
+ 
+ #
+-# DMA Engine support
++# Platform RTC drivers
+ #
+-# CONFIG_DMA_ENGINE is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
+ 
+ #
+-# DMA Clients
++# on-CPU RTC drivers
+ #
++CONFIG_RTC_DRV_AT32AP700X=y
+ 
+ #
+-# DMA Devices
++# Userspace I/O
+ #
++# CONFIG_UIO is not set
+ 
+ #
+ # File systems
+@@ -593,8 +886,11 @@ CONFIG_UNIX98_PTYS=y
+ CONFIG_EXT2_FS=m
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+-# CONFIG_EXT3_FS is not set
++CONFIG_EXT3_FS=m
++# CONFIG_EXT3_FS_XATTR is not set
+ # CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=m
++# CONFIG_JBD_DEBUG is not set
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+@@ -609,7 +905,7 @@ CONFIG_INOTIFY_USER=y
+ # CONFIG_DNOTIFY is not set
+ # CONFIG_AUTOFS_FS is not set
+ # CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
++CONFIG_FUSE_FS=m
+ 
+ #
+ # CD-ROM/DVD Filesystems
+@@ -637,8 +933,7 @@ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-CONFIG_RAMFS=y
+-CONFIG_CONFIGFS_FS=m
++# CONFIG_CONFIGFS_FS is not set
+ 
+ #
+ # Miscellaneous filesystems
+@@ -652,11 +947,12 @@ CONFIG_CONFIGFS_FS=m
+ # CONFIG_EFS_FS is not set
+ CONFIG_JFFS2_FS=y
+ CONFIG_JFFS2_FS_DEBUG=0
+-CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+ # CONFIG_JFFS2_SUMMARY is not set
+ # CONFIG_JFFS2_FS_XATTR is not set
+ # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+ CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
+ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
+ # CONFIG_CRAMFS is not set
+@@ -665,10 +961,7 @@ CONFIG_JFFS2_RTIME=y
+ # CONFIG_QNX4FS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+-
+-#
+-# Network File Systems
+-#
++CONFIG_NETWORK_FILESYSTEMS=y
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
+@@ -688,17 +981,12 @@ CONFIG_SUNRPC=y
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
+ # CONFIG_AFS_FS is not set
+-# CONFIG_9P_FS is not set
+ 
+ #
+ # Partition Types
+ #
+ # CONFIG_PARTITION_ADVANCED is not set
+ CONFIG_MSDOS_PARTITION=y
+-
+-#
+-# Native Language Support
+-#
+ CONFIG_NLS=m
+ CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=m
+@@ -739,17 +1027,18 @@ CONFIG_NLS_ISO8859_1=m
+ # CONFIG_NLS_KOI8_R is not set
+ # CONFIG_NLS_KOI8_U is not set
+ CONFIG_NLS_UTF8=m
+-
+-#
+-# Distributed Lock Manager
+-#
+ # CONFIG_DLM is not set
++CONFIG_INSTRUMENTATION=y
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++CONFIG_KPROBES=y
++# CONFIG_MARKERS is not set
+ 
+ #
+ # Kernel hacking
+ #
+-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ # CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
+ CONFIG_ENABLE_MUST_CHECK=y
+ CONFIG_MAGIC_SYSRQ=y
+ # CONFIG_UNUSED_SYMBOLS is not set
+@@ -758,12 +1047,17 @@ CONFIG_DEBUG_FS=y
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+ # CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+@@ -771,22 +1065,63 @@ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+ # CONFIG_DEBUG_VM is not set
+ # CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
+ CONFIG_FRAME_POINTER=y
+ CONFIG_FORCED_INLINING=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_LKDTM is not set
+ # CONFIG_FAULT_INJECTION is not set
+-# CONFIG_KPROBES is not set
++# CONFIG_SAMPLES is not set
+ 
+ #
+ # Security options
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-
+-#
+-# Cryptographic options
+-#
+-# CONFIG_CRYPTO is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=m
++CONFIG_CRYPTO_BLKCIPHER=m
++CONFIG_CRYPTO_HASH=m
++CONFIG_CRYPTO_MANAGER=m
++CONFIG_CRYPTO_HMAC=m
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=m
++CONFIG_CRYPTO_SHA1=m
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=m
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=m
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++CONFIG_CRYPTO_DEFLATE=m
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_HW is not set
+ 
+ #
+ # Library routines
+@@ -794,10 +1129,10 @@ CONFIG_FORCED_INLINING=y
+ CONFIG_BITREVERSE=y
+ CONFIG_CRC_CCITT=m
+ # CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC_ITU_T=m
+ CONFIG_CRC32=y
++CONFIG_CRC7=m
+ # CONFIG_LIBCRC32C is not set
+-CONFIG_AUDIT_GENERIC=y
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_ZLIB_DEFLATE=y
+ CONFIG_PLIST=y
+diff -Nrup linux-2.6.24/arch/avr32/configs/atstk1003_defconfig linux-avr32/arch/avr32/configs/atstk1003_defconfig
+--- linux-2.6.24/arch/avr32/configs/atstk1003_defconfig	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/configs/atstk1003_defconfig	2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,1015 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.24-rc7
++# Wed Jan  9 22:54:34 2008
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_ARCH_SUPPORTS_OPROFILE=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++CONFIG_TASKSTATS=y
++CONFIG_TASK_DELAY_ACCT=y
++# CONFIG_TASK_XACCT is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++CONFIG_AUDIT=y
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_RELAY=y
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_BASE_FULL is not set
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++# CONFIG_SLUB_DEBUG is not set
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_AS is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++
++#
++# System Type and features
++#
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
++CONFIG_CPU_AT32AP7001=y
++CONFIG_BOARD_ATSTK1000=y
++# CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_ATSTK1002 is not set
++CONFIG_BOARD_ATSTK1003=y
++# CONFIG_BOARD_ATSTK1004 is not set
++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
++# CONFIG_BOARD_ATSTK100X_SPI1 is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
++# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
++CONFIG_BOARD_ATSTK1000_EXTDAC=y
++CONFIG_LOADER_U_BOOT=y
++
++#
++# Atmel AVR32 AP options
++#
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_OWNERSHIP_TRACE is not set
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_CMDLINE=""
++
++#
++# Power management options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_PNP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_TCPPROBE is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x8000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=m
++CONFIG_MTD_M25P80=m
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=m
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=m
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_SCSI_PROC_FS is not set
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=m
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++CONFIG_BLK_DEV_SR=m
++# CONFIG_BLK_DEV_SR_VENDOR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_SCSI_DEBUG is not set
++CONFIG_ATA=m
++# CONFIG_ATA_NONSTANDARD is not set
++CONFIG_PATA_AT32=m
++# CONFIG_PATA_PLATFORM is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_NET_ETHERNET is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++CONFIG_PPP=m
++# CONFIG_PPP_MULTILINK is not set
++# CONFIG_PPP_FILTER is not set
++CONFIG_PPP_ASYNC=m
++# CONFIG_PPP_SYNC_TTY is not set
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++# CONFIG_PPP_MPPE is not set
++# CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=m
++# CONFIG_INPUT_FF_MEMLESS is not set
++CONFIG_INPUT_POLLDEV=m
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++CONFIG_MOUSE_GPIO=m
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_RTC is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++CONFIG_SOUND=m
++
++#
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++CONFIG_SND_SUPPORT_OLD_API=y
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++
++#
++# Generic devices
++#
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++
++#
++# SPI devices
++#
++CONFIG_SND_AT73C213=m
++CONFIG_SND_AT73C213_TARGET_BITRATE=48000
++
++#
++# System on Chip audio support
++#
++# CONFIG_SND_SOC is not set
++
++#
++# SoC Audio support for SuperH
++#
++
++#
++# Open Sound System
++#
++# CONFIG_SOUND_PRIME is not set
++# CONFIG_HID_SUPPORT is not set
++CONFIG_USB_SUPPORT=y
++# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_DEBUG_FS=y
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=m
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=m
++# CONFIG_MMC_BLOCK_BOUNCE is not set
++# CONFIG_SDIO_UART is not set
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_SPI=m
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++CONFIG_LEDS_GPIO=y
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
++
++#
++# Userspace I/O
++#
++CONFIG_UIO=m
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=m
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=m
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=m
++# CONFIG_JBD_DEBUG is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_DNOTIFY is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++CONFIG_FUSE_FS=m
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=m
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++# CONFIG_NETWORK_FILESYSTEMS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=m
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=m
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=m
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
++# CONFIG_DLM is not set
++CONFIG_INSTRUMENTATION=y
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++CONFIG_KPROBES=y
++# CONFIG_MARKERS is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++CONFIG_FRAME_POINTER=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_LKDTM is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++# CONFIG_CRYPTO is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_CRC_CCITT=m
++# CONFIG_CRC16 is not set
++CONFIG_CRC_ITU_T=m
++CONFIG_CRC32=y
++CONFIG_CRC7=m
++# CONFIG_LIBCRC32C is not set
++CONFIG_AUDIT_GENERIC=y
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff -Nrup linux-2.6.24/arch/avr32/configs/atstk1004_defconfig linux-avr32/arch/avr32/configs/atstk1004_defconfig
+--- linux-2.6.24/arch/avr32/configs/atstk1004_defconfig	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/configs/atstk1004_defconfig	2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,621 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.24-rc7
++# Wed Jan  9 23:04:20 2008
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_ARCH_SUPPORTS_OPROFILE=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++# CONFIG_SYSVIPC is not set
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++# CONFIG_FAIR_GROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_BLK_DEV_INITRD is not set
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_BASE_FULL is not set
++# CONFIG_FUTEX is not set
++# CONFIG_EPOLL is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_EVENTFD is not set
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++# CONFIG_SLAB is not set
++# CONFIG_SLUB is not set
++CONFIG_SLOB=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++# CONFIG_MODULES is not set
++# CONFIG_BLOCK is not set
++
++#
++# System Type and features
++#
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
++CONFIG_CPU_AT32AP7002=y
++CONFIG_BOARD_ATSTK1000=y
++# CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_ATSTK1002 is not set
++# CONFIG_BOARD_ATSTK1003 is not set
++CONFIG_BOARD_ATSTK1004=y
++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
++# CONFIG_BOARD_ATSTK100X_SPI1 is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++CONFIG_BOARD_ATSTK1000_EXTDAC=y
++CONFIG_LOADER_U_BOOT=y
++
++#
++# Atmel AVR32 AP options
++#
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_OWNERSHIP_TRACE is not set
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_CMDLINE=""
++
++#
++# Power management options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_PNP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++# CONFIG_FW_LOADER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x8000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++# CONFIG_MISC_DEVICES is not set
++
++#
++# SCSI device support
++#
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_NETDEVICES is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_RTC is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_VIRTUAL is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_LCD_LTV350QV=y
++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++# CONFIG_LOGO is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++# CONFIG_USB_ZERO is not set
++CONFIG_USB_ETH=y
++# CONFIG_USB_ETH_RNDIS is not set
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FILE_STORAGE is not set
++# CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_NEW_LEDS is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++# CONFIG_RTC_INTF_PROC is not set
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++# CONFIG_INOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_DNOTIFY is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++# CONFIG_JFFS2_FS_WRITEBUFFER is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_NETWORK_FILESYSTEMS is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++# CONFIG_INSTRUMENTATION is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++# CONFIG_CRYPTO is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff -Nrup linux-2.6.24/arch/avr32/drivers/dw-dmac.c linux-avr32/arch/avr32/drivers/dw-dmac.c
+--- linux-2.6.24/arch/avr32/drivers/dw-dmac.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/drivers/dw-dmac.c	2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,761 @@
++/*
++ * Driver for the Synopsys DesignWare DMA Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++
++#include "dw-dmac.h"
++
++#define DMAC_NR_CHANNELS 3
++#define DMAC_MAX_BLOCKSIZE 4095
++
++enum {
++	CH_STATE_FREE = 0,
++	CH_STATE_ALLOCATED,
++	CH_STATE_BUSY,
++};
++
++struct dw_dma_lli {
++	dma_addr_t	sar;
++	dma_addr_t	dar;
++	dma_addr_t	llp;
++	u32		ctllo;
++	u32		ctlhi;
++	u32		sstat;
++	u32		dstat;
++};
++
++struct dw_dma_block {
++	struct dw_dma_lli *lli_vaddr;
++	dma_addr_t lli_dma_addr;
++};
++
++struct dw_dma_channel {
++	unsigned int state;
++        int is_cyclic;
++	struct dma_request_sg *req_sg;
++	struct dma_request_cyclic *req_cyclic;
++	unsigned int nr_blocks;
++	int direction;
++	struct dw_dma_block *block;
++};
++
++struct dw_dma_controller {
++	spinlock_t lock;
++	void * __iomem	regs;
++	struct dma_pool *lli_pool;
++	struct clk *hclk;
++	struct dma_controller dma;
++	struct dw_dma_channel channel[DMAC_NR_CHANNELS];
++};
++#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
++
++#define dmac_writel_hi(dmac, reg, value) \
++	__raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_readl_hi(dmac, reg) \
++	__raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_writel_lo(dmac, reg, value) \
++	__raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
++#define dmac_readl_lo(dmac, reg) \
++	__raw_readl((dmac)->regs + DW_DMAC_##reg)
++#define dmac_chan_writel_hi(dmac, chan, reg, value) \
++	__raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
++			       + DW_DMAC_CHAN_##reg + 4))
++#define dmac_chan_readl_hi(dmac, chan, reg) \
++	__raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
++#define dmac_chan_writel_lo(dmac, chan, reg, value) \
++	__raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define dmac_chan_readl_lo(dmac, chan, reg) \
++	__raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define set_channel_bit(dmac, reg, chan) \
++	dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
++#define clear_channel_bit(dmac, reg, chan) \
++	dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
++
++static int dmac_alloc_channel(struct dma_controller *_dmac)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++	struct dw_dma_channel *chan;
++	unsigned long flags;
++	int i;
++
++	spin_lock_irqsave(&dmac->lock, flags);
++	for (i = 0; i < DMAC_NR_CHANNELS; i++)
++		if (dmac->channel[i].state == CH_STATE_FREE)
++			break;
++
++	if (i < DMAC_NR_CHANNELS) {
++		chan = &dmac->channel[i];
++		chan->state = CH_STATE_ALLOCATED;
++	} else {
++		i = -EBUSY;
++	}
++
++	spin_unlock_irqrestore(&dmac->lock, flags);
++
++	return i;
++}
++
++static void dmac_release_channel(struct dma_controller *_dmac, int channel)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++
++	BUG_ON(channel >= DMAC_NR_CHANNELS
++	       || dmac->channel[channel].state != CH_STATE_ALLOCATED);
++
++	dmac->channel[channel].state = CH_STATE_FREE;
++}
++
++static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
++					    unsigned int nr_blocks)
++{
++	struct dw_dma_block *block;
++	void *p;
++	unsigned int i;
++
++	block = kmalloc(nr_blocks * sizeof(*block),
++			GFP_KERNEL);
++	if (unlikely(!block))
++		return NULL;
++
++	for (i = 0; i < nr_blocks; i++) {
++		p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
++				   &block[i].lli_dma_addr);
++		block[i].lli_vaddr = p;
++		if (unlikely(!p))
++			goto fail;
++	}
++
++	return block;
++
++fail:
++	for (i = 0; i < nr_blocks; i++) {
++		if (!block[i].lli_vaddr)
++			break;
++		dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
++			      block[i].lli_dma_addr);
++	}
++	kfree(block);
++	return NULL;
++}
++
++static void cleanup_channel(struct dw_dma_controller *dmac,
++			    struct dw_dma_channel *chan)
++{
++	unsigned int i;
++
++	if (chan->nr_blocks > 1) {
++		for (i = 0; i < chan->nr_blocks; i++)
++			dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
++				      chan->block[i].lli_dma_addr);
++		kfree(chan->block);
++	}
++
++	chan->state = CH_STATE_ALLOCATED;
++}
++
++static int dmac_prepare_request_sg(struct dma_controller *_dmac,
++				   struct dma_request_sg *req)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++	struct dw_dma_channel *chan;
++	unsigned long ctlhi, ctllo, cfghi, cfglo;
++	unsigned long block_size;
++	unsigned int nr_blocks;
++	int ret, i, direction;
++	unsigned long flags;
++
++	spin_lock_irqsave(&dmac->lock, flags);
++
++	ret = -EINVAL;
++	if (req->req.channel >= DMAC_NR_CHANNELS
++	    || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++	    || req->block_size > DMAC_MAX_BLOCKSIZE) {
++		spin_unlock_irqrestore(&dmac->lock, flags);
++		return -EINVAL;
++	}
++
++	chan = &dmac->channel[req->req.channel];
++	chan->state = CH_STATE_BUSY;
++	chan->req_sg = req;
++	chan->is_cyclic = 0;
++
++	/*
++	 * We have marked the channel as busy, so no need to keep the
++	 * lock as long as we only touch the channel-specific
++	 * registers
++	 */
++	spin_unlock_irqrestore(&dmac->lock, flags);
++
++	/*
++	 * There may be limitations in the driver and/or the DMA
++	 * controller that prevents us from sending a whole
++	 * scatterlist item in one go.  Taking this into account,
++	 * calculate the number of block transfers we need to set up.
++	 *
++	 * FIXME: Let the peripheral driver know about the maximum
++	 * block size we support. We really don't want to use a
++	 * different block size than what was suggested by the
++	 * peripheral.
++	 *
++	 * Each block will get its own Linked List Item (LLI) below.
++	 */
++	block_size = req->block_size;
++	nr_blocks = req->nr_blocks;
++	pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
++		 block_size, nr_blocks, req->nr_sg);
++
++	BUG_ON(nr_blocks == 0);
++	chan->nr_blocks = nr_blocks;
++
++	ret = -EINVAL;
++	cfglo = cfghi = 0;
++	switch (req->direction) {
++	case DMA_DIR_MEM_TO_PERIPH:
++		direction = DMA_TO_DEVICE;
++		cfghi = req->periph_id << (43 - 32);
++		break;
++
++	case DMA_DIR_PERIPH_TO_MEM:
++		direction = DMA_FROM_DEVICE;
++		cfghi = req->periph_id << (39 - 32);
++		break;
++	default:
++		goto out_unclaim_channel;
++	}
++
++        chan->direction = direction;
++
++	dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++	dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++
++	ctlhi = block_size >> req->width;
++	ctllo = ((req->direction << 20)
++		 // | (1 << 14) | (1 << 11) // source/dest burst trans len
++		 | (req->width << 4) | (req->width << 1)
++		 | (1 << 0));		 // interrupt enable
++
++	if (nr_blocks == 1) {
++		/* Only one block: No need to use block chaining */
++		if (direction == DMA_TO_DEVICE) {
++			dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++					    req->sg->dma_address);
++			dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++					    req->data_reg);
++			ctllo |= 2 << 7; // no dst increment
++		} else {
++			dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++					    req->data_reg);
++			dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++					    req->sg->dma_address);
++			ctllo |= 2 << 9; // no src increment
++		}
++		dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
++		dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
++		pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
++	} else {
++		struct dw_dma_lli *lli, *lli_prev = NULL;
++		int j = 0, offset = 0;
++
++		ret = -ENOMEM;
++		chan->block = allocate_blocks(dmac, nr_blocks);
++		if (!chan->block)
++			goto out_unclaim_channel;
++
++		if (direction == DMA_TO_DEVICE)
++			ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++		else
++			ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++
++		/*
++		 * Map scatterlist items to blocks. One scatterlist
++		 * item may need more than one block for the reasons
++		 * mentioned above.
++		 */
++		for (i = 0; i < nr_blocks; i++) {
++			lli = chan->block[i].lli_vaddr;
++			if (lli_prev) {
++				lli_prev->llp = chan->block[i].lli_dma_addr;
++				pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++					 i - 1, chan->block[i - 1].lli_vaddr,
++					 chan->block[i - 1].lli_dma_addr,
++					 lli_prev->sar, lli_prev->dar, lli_prev->llp,
++					 lli_prev->ctllo, lli_prev->ctlhi);
++			}
++			lli->llp = 0;
++			lli->ctllo = ctllo;
++			lli->ctlhi = ctlhi;
++			if (direction == DMA_TO_DEVICE) {
++				lli->sar = req->sg[j].dma_address + offset;
++				lli->dar = req->data_reg;
++			} else {
++				lli->sar = req->data_reg;
++				lli->dar = req->sg[j].dma_address + offset;
++			}
++			lli_prev = lli;
++
++			offset += block_size;
++			if (offset > req->sg[j].length) {
++				j++;
++				offset = 0;
++			}
++		}
++
++		pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++			 i - 1, chan->block[i - 1].lli_vaddr,
++			 chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++			 lli_prev->dar, lli_prev->llp,
++			 lli_prev->ctllo, lli_prev->ctlhi);
++
++		/*
++		 * SAR, DAR and CTL are initialized from the LLI. We
++		 * only have to enable the LLI bits in CTL.
++		 */
++		dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
++		dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++				    chan->block[0].lli_dma_addr);
++		dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
++	}
++
++	set_channel_bit(dmac, MASK_XFER, req->req.channel);
++	set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++	if (req->req.block_complete)
++		set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++	else
++		clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++
++	return 0;
++
++out_unclaim_channel:
++	chan->state = CH_STATE_ALLOCATED;
++	return ret;
++}
++
++static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
++                                       struct dma_request_cyclic *req)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++	struct dw_dma_channel *chan;
++	unsigned long ctlhi, ctllo, cfghi, cfglo;
++	unsigned long block_size;
++	int ret, i, direction;
++	unsigned long flags;
++
++	spin_lock_irqsave(&dmac->lock, flags);
++
++        block_size = (req->buffer_size/req->periods) >> req->width;
++
++	ret = -EINVAL;
++	if (req->req.channel >= DMAC_NR_CHANNELS
++	    || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++            || (req->periods == 0)
++	    || block_size > DMAC_MAX_BLOCKSIZE) {
++		spin_unlock_irqrestore(&dmac->lock, flags);
++		return -EINVAL;
++	}
++
++	chan = &dmac->channel[req->req.channel];
++	chan->state = CH_STATE_BUSY;
++	chan->is_cyclic = 1;
++        chan->req_cyclic = req;
++
++	/*
++	 * We have marked the channel as busy, so no need to keep the
++	 * lock as long as we only touch the channel-specific
++	 * registers
++	 */
++	spin_unlock_irqrestore(&dmac->lock, flags);
++
++	/*
++          Setup
++	 */
++	BUG_ON(req->buffer_size % req->periods);
++	/* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
++
++	chan->nr_blocks = req->periods;
++
++	ret = -EINVAL;
++	cfglo = cfghi = 0;
++	switch (req->direction) {
++	case DMA_DIR_MEM_TO_PERIPH:
++		direction = DMA_TO_DEVICE;
++		cfghi = req->periph_id << (43 - 32);
++		break;
++
++	case DMA_DIR_PERIPH_TO_MEM:
++		direction = DMA_FROM_DEVICE;
++		cfghi = req->periph_id << (39 - 32);
++		break;
++	default:
++		goto out_unclaim_channel;
++	}
++
++        chan->direction = direction;
++
++	dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++	dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++
++	ctlhi = block_size;
++	ctllo = ((req->direction << 20)
++		 | (req->width << 4) | (req->width << 1)
++		 | (1 << 0));		 // interrupt enable
++
++        {
++		struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
++
++		ret = -ENOMEM;
++		chan->block = allocate_blocks(dmac, req->periods);
++		if (!chan->block)
++			goto out_unclaim_channel;
++
++		if (direction == DMA_TO_DEVICE)
++			ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++		else
++			ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++
++		/*
++		 * Set up a linked list items where each period gets
++		 * an item. The linked list item for the last period
++		 * points back to the star of the buffer making a
++		 * cyclic buffer.
++		 */
++		for (i = 0; i < req->periods; i++) {
++			lli = chan->block[i].lli_vaddr;
++			if (lli_prev) {
++				lli_prev->llp = chan->block[i].lli_dma_addr;
++				/* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++				   i - 1, chan->block[i - 1].lli_vaddr,
++				   chan->block[i - 1].lli_dma_addr,
++				   lli_prev->sar, lli_prev->dar, lli_prev->llp,
++				   lli_prev->ctllo, lli_prev->ctlhi);*/
++			}
++			lli->llp = 0;
++			lli->ctllo = ctllo;
++			lli->ctlhi = ctlhi;
++			if (direction == DMA_TO_DEVICE) {
++				lli->sar = req->buffer_start + i*(block_size << req->width);
++				lli->dar = req->data_reg;
++			} else {
++				lli->sar = req->data_reg;
++				lli->dar = req->buffer_start + i*(block_size << req->width);
++			}
++			lli_prev = lli;
++		}
++		lli->llp = chan->block[0].lli_dma_addr;
++
++		/*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++		  i - 1, chan->block[i - 1].lli_vaddr,
++		  chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++		  lli_prev->dar, lli_prev->llp,
++		  lli_prev->ctllo, lli_prev->ctlhi); */
++
++		/*
++		 * SAR, DAR and CTL are initialized from the LLI. We
++		 * only have to enable the LLI bits in CTL.
++		 */
++		dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++				    chan->block[0].lli_dma_addr);
++		dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
++	}
++
++	clear_channel_bit(dmac, MASK_XFER, req->req.channel);
++	set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++	if (req->req.block_complete)
++		set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++	else
++		clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++
++	return 0;
++
++out_unclaim_channel:
++	chan->state = CH_STATE_ALLOCATED;
++	return ret;
++}
++
++static int dmac_start_request(struct dma_controller *_dmac,
++			      unsigned int channel)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++
++	BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++	set_channel_bit(dmac, CH_EN, channel);
++
++	return 0;
++}
++
++static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
++                                       unsigned int channel)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++	struct dw_dma_channel *chan;
++        dma_addr_t current_pos;
++
++	BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++        chan = &dmac->channel[channel];
++
++	switch (chan->direction) {
++	case DMA_TO_DEVICE:
++		current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
++		break;
++	case DMA_FROM_DEVICE:
++		current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
++		break;
++	default:
++		return 0;
++	}
++
++
++        if (!current_pos) {
++		if (chan->is_cyclic) {
++			current_pos = chan->req_cyclic->buffer_start;
++		} else {
++			current_pos = chan->req_sg->sg->dma_address;
++		}
++	}
++
++	return current_pos;
++}
++
++
++static int dmac_stop_request(struct dma_controller *_dmac,
++                             unsigned int channel)
++{
++	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++	struct dw_dma_channel *chan;
++
++	BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++	chan = &dmac->channel[channel];
++	pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
++		 chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
++		 dmac_chan_readl_lo(dmac, channel, DAR),
++		 dmac_chan_readl_lo(dmac, channel, LLP),
++		 dmac_chan_readl_hi(dmac, channel, CTL),
++		 dmac_chan_readl_lo(dmac, channel, CTL));
++
++	if (chan->state == CH_STATE_BUSY) {
++		clear_channel_bit(dmac, CH_EN, channel);
++		cleanup_channel(dmac, &dmac->channel[channel]);
++	}
++
++	return 0;
++}
++
++
++static void dmac_block_complete(struct dw_dma_controller *dmac)
++{
++	struct dw_dma_channel *chan;
++	unsigned long status, chanid;
++
++	status = dmac_readl_lo(dmac, STATUS_BLOCK);
++
++	while (status) {
++		struct dma_request *req;
++		chanid = __ffs(status);
++		chan = &dmac->channel[chanid];
++
++                if (chan->is_cyclic) {
++			BUG_ON(!chan->req_cyclic
++			       || !chan->req_cyclic->req.block_complete);
++			req = &chan->req_cyclic->req;
++                } else {
++			BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
++			req = &chan->req_sg->req;
++                }
++		dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
++		req->block_complete(req);
++		status = dmac_readl_lo(dmac, STATUS_BLOCK);
++	}
++}
++
++static void dmac_xfer_complete(struct dw_dma_controller *dmac)
++{
++	struct dw_dma_channel *chan;
++	struct dma_request *req;
++	unsigned long status, chanid;
++
++	status = dmac_readl_lo(dmac, STATUS_XFER);
++
++	while (status) {
++		chanid = __ffs(status);
++		chan = &dmac->channel[chanid];
++
++		dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
++
++                req = &chan->req_sg->req;
++                BUG_ON(!req);
++                cleanup_channel(dmac, chan);
++                if (req->xfer_complete)
++			req->xfer_complete(req);
++
++		status = dmac_readl_lo(dmac, STATUS_XFER);
++	}
++}
++
++static void dmac_error(struct dw_dma_controller *dmac)
++{
++	struct dw_dma_channel *chan;
++	unsigned long status, chanid;
++
++	status = dmac_readl_lo(dmac, STATUS_ERROR);
++
++	while (status) {
++		struct dma_request *req;
++
++		chanid = __ffs(status);
++		chan = &dmac->channel[chanid];
++
++		dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
++		clear_channel_bit(dmac, CH_EN, chanid);
++
++                if (chan->is_cyclic) {
++			BUG_ON(!chan->req_cyclic);
++			req = &chan->req_cyclic->req;
++                } else {
++			BUG_ON(!chan->req_sg);
++			req = &chan->req_sg->req;
++                }
++
++		cleanup_channel(dmac, chan);
++		if (req->error)
++			req->error(req);
++
++		status = dmac_readl_lo(dmac, STATUS_XFER);
++	}
++}
++
++static irqreturn_t dmac_interrupt(int irq, void *dev_id)
++{
++	struct dw_dma_controller *dmac = dev_id;
++	unsigned long status;
++	int ret = IRQ_NONE;
++
++	spin_lock(&dmac->lock);
++
++	status = dmac_readl_lo(dmac, STATUS_INT);
++
++	while (status) {
++		ret = IRQ_HANDLED;
++		if (status & 0x10)
++			dmac_error(dmac);
++		if (status & 0x02)
++			dmac_block_complete(dmac);
++		if (status & 0x01)
++			dmac_xfer_complete(dmac);
++
++		status = dmac_readl_lo(dmac, STATUS_INT);
++	}
++
++	spin_unlock(&dmac->lock);
++	return ret;
++}
++
++static int __devinit dmac_probe(struct platform_device *pdev)
++{
++	struct dw_dma_controller *dmac;
++	struct resource *regs;
++	int ret;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs)
++		return -ENXIO;
++
++	dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
++	if (!dmac)
++		return -ENOMEM;
++	memset(dmac, 0, sizeof(*dmac));
++
++	dmac->hclk = clk_get(&pdev->dev, "hclk");
++	if (IS_ERR(dmac->hclk)) {
++		ret = PTR_ERR(dmac->hclk);
++		goto out_free_dmac;
++	}
++	clk_enable(dmac->hclk);
++
++	ret = -ENOMEM;
++	dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
++					 sizeof(struct dw_dma_lli), 4, 0);
++	if (!dmac->lli_pool)
++		goto out_disable_clk;
++
++	spin_lock_init(&dmac->lock);
++	dmac->dma.dev = &pdev->dev;
++	dmac->dma.alloc_channel = dmac_alloc_channel;
++	dmac->dma.release_channel = dmac_release_channel;
++	dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
++	dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
++	dmac->dma.start_request = dmac_start_request;
++	dmac->dma.stop_request = dmac_stop_request;
++	dmac->dma.get_current_pos = dmac_get_current_pos;
++
++	dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!dmac->regs)
++		goto out_free_pool;
++
++	ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
++			  IRQF_SAMPLE_RANDOM, pdev->name, dmac);
++	if (ret)
++		goto out_unmap_regs;
++
++	/* Enable the DMA controller */
++	dmac_writel_lo(dmac, CFG, 1);
++
++	register_dma_controller(&dmac->dma);
++
++	printk(KERN_INFO
++	       "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
++	       dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
++
++	return 0;
++
++out_unmap_regs:
++	iounmap(dmac->regs);
++out_free_pool:
++	dma_pool_destroy(dmac->lli_pool);
++out_disable_clk:
++	clk_disable(dmac->hclk);
++	clk_put(dmac->hclk);
++out_free_dmac:
++	kfree(dmac);
++	return ret;
++}
++
++static struct platform_driver dmac_driver = {
++	.probe		= dmac_probe,
++	.driver		= {
++		.name		= "dmaca",
++	},
++};
++
++static int __init dmac_init(void)
++{
++	return platform_driver_register(&dmac_driver);
++}
++subsys_initcall(dmac_init);
++
++static void __exit dmac_exit(void)
++{
++	platform_driver_unregister(&dmac_driver);
++}
++module_exit(dmac_exit);
++
++MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_LICENSE("GPL");
+diff -Nrup linux-2.6.24/arch/avr32/drivers/dw-dmac.h linux-avr32/arch/avr32/drivers/dw-dmac.h
+--- linux-2.6.24/arch/avr32/drivers/dw-dmac.h	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/drivers/dw-dmac.h	2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,42 @@
++/*
++ * Driver for the Synopsys DesignWare DMA Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __AVR32_DW_DMAC_H__
++#define __AVR32_DW_DMAC_H__
++
++#define DW_DMAC_CFG		0x398
++#define DW_DMAC_CH_EN		0x3a0
++
++#define DW_DMAC_STATUS_XFER	0x2e8
++#define DW_DMAC_STATUS_BLOCK	0x2f0
++#define DW_DMAC_STATUS_ERROR	0x308
++
++#define DW_DMAC_MASK_XFER	0x310
++#define DW_DMAC_MASK_BLOCK	0x318
++#define DW_DMAC_MASK_ERROR	0x330
++
++#define DW_DMAC_CLEAR_XFER	0x338
++#define DW_DMAC_CLEAR_BLOCK	0x340
++#define DW_DMAC_CLEAR_ERROR	0x358
++
++#define DW_DMAC_STATUS_INT	0x360
++
++#define DW_DMAC_CHAN_SAR	0x000
++#define DW_DMAC_CHAN_DAR	0x008
++#define DW_DMAC_CHAN_LLP	0x010
++#define DW_DMAC_CHAN_CTL	0x018
++#define DW_DMAC_CHAN_SSTAT	0x020
++#define DW_DMAC_CHAN_DSTAT	0x028
++#define DW_DMAC_CHAN_SSTATAR	0x030
++#define DW_DMAC_CHAN_DSTATAR	0x038
++#define DW_DMAC_CHAN_CFG	0x040
++#define DW_DMAC_CHAN_SGR	0x048
++#define DW_DMAC_CHAN_DSR	0x050
++
++#endif /* __AVR32_DW_DMAC_H__ */
+diff -Nrup linux-2.6.24/arch/avr32/drivers/Makefile linux-avr32/arch/avr32/drivers/Makefile
+--- linux-2.6.24/arch/avr32/drivers/Makefile	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/drivers/Makefile	2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1 @@
++obj-$(CONFIG_DW_DMAC)			+= dw-dmac.o
+diff -Nrup linux-2.6.24/arch/avr32/Kconfig linux-avr32/arch/avr32/Kconfig
+--- linux-2.6.24/arch/avr32/Kconfig	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/Kconfig	2008-02-01 14:51:35.000000000 -0500
+@@ -54,6 +54,9 @@ config ARCH_HAS_ILOG2_U32
+ config ARCH_HAS_ILOG2_U64
+ 	def_bool n
+ 
++config ARCH_SUPPORTS_OPROFILE
++	def_bool y
++
+ config GENERIC_HWEIGHT
+ 	def_bool y
+ 
+@@ -81,19 +84,23 @@ config PLATFORM_AT32AP
+ 	select MMU
+ 	select PERFORMANCE_COUNTERS
+ 
+-choice
+-	prompt "AVR32 CPU type"
+-	default CPU_AT32AP7000
++#
++# CPU types
++#
+ 
+-config CPU_AT32AP7000
+-	bool "AT32AP7000"
++# AP7000 derivatives
++config CPU_AT32AP700X
++	bool
+ 	select PLATFORM_AT32AP
+-endchoice
+-
+-#
+-# CPU Daughterboards for ATSTK1000
+-config BOARD_ATSTK1002
++config CPU_AT32AP7000
++	bool
++	select CPU_AT32AP700X
++config CPU_AT32AP7001
+ 	bool
++	select CPU_AT32AP700X
++config CPU_AT32AP7002
++	bool
++	select CPU_AT32AP700X
+ 
+ choice
+ 	prompt "AVR32 board type"
+@@ -101,15 +108,18 @@ choice
+ 
+ config BOARD_ATSTK1000
+ 	bool "ATSTK1000 evaluation board"
+-	select BOARD_ATSTK1002 if CPU_AT32AP7000
+ 
+ config BOARD_ATNGW100
+ 	bool "ATNGW100 Network Gateway"
++	select CPU_AT32AP7000
+ endchoice
+ 
+ if BOARD_ATSTK1000
+ source "arch/avr32/boards/atstk1000/Kconfig"
+ endif
++if BOARD_ATNGW100
++source "arch/avr32/boards/atngw100/Kconfig"
++endif
+ 
+ choice
+ 	prompt "Boot loader type"
+@@ -123,15 +133,15 @@ source "arch/avr32/mach-at32ap/Kconfig"
+ 
+ config LOAD_ADDRESS
+ 	hex
+-	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
++	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
+ 
+ config ENTRY_ADDRESS
+ 	hex
+-	default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
++	default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
+ 
+ config PHYS_OFFSET
+ 	hex
+-	default 0x10000000 if CPU_AT32AP7000=y
++	default 0x10000000 if CPU_AT32AP700X=y
+ 
+ source "kernel/Kconfig.preempt"
+ 
+@@ -163,6 +173,20 @@ config OWNERSHIP_TRACE
+ 	  enabling Nexus-compliant debuggers to keep track of the PID of the
+ 	  currently executing task.
+ 
++config NMI_DEBUGGING
++	bool "NMI Debugging"
++	default n
++	help
++	  Say Y here and pass the nmi_debug command-line parameter to
++	  the kernel to turn on NMI debugging. Depending on the value
++	  of the nmi_debug option, various pieces of information will
++	  be dumped to the console when a Non-Maskable Interrupt
++	  happens.
++
++config DW_DMAC
++	tristate "Synopsys DesignWare DMA Controller support"
++	default y if CPU_AT32AP7000
++
+ # FPU emulation goes here
+ 
+ source "kernel/Kconfig.hz"
+@@ -219,6 +243,8 @@ source "drivers/Kconfig"
+ 
+ source "fs/Kconfig"
+ 
++source "kernel/Kconfig.instrumentation"
++
+ source "arch/avr32/Kconfig.debug"
+ 
+ source "security/Kconfig"
+diff -Nrup linux-2.6.24/arch/avr32/Kconfig.debug linux-avr32/arch/avr32/Kconfig.debug
+--- linux-2.6.24/arch/avr32/Kconfig.debug	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/Kconfig.debug	2008-02-01 14:51:35.000000000 -0500
+@@ -6,14 +6,4 @@ config TRACE_IRQFLAGS_SUPPORT
+ 
+ source "lib/Kconfig.debug"
+ 
+-config KPROBES
+-	bool "Kprobes"
+-	depends on DEBUG_KERNEL
+-	help
+-	  Kprobes allows you to trap at almost any kernel address and
+-          execute a callback function.  register_kprobe() establishes
+-          a probepoint and specifies the callback.  Kprobes is useful
+-          for kernel debugging, non-intrusive instrumentation and testing.
+-          If in doubt, say "N".
+-
+ endmenu
+diff -Nrup linux-2.6.24/arch/avr32/kernel/cpu.c linux-avr32/arch/avr32/kernel/cpu.c
+--- linux-2.6.24/arch/avr32/kernel/cpu.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/cpu.c	2008-02-01 14:51:35.000000000 -0500
+@@ -13,6 +13,7 @@
+ #include <linux/percpu.h>
+ #include <linux/param.h>
+ #include <linux/errno.h>
++#include <linux/clk.h>
+ 
+ #include <asm/setup.h>
+ #include <asm/sysreg.h>
+@@ -187,9 +188,20 @@ static int __init topology_init(void)
+ 
+ subsys_initcall(topology_init);
+ 
++struct chip_id_map {
++	u16	mid;
++	u16	pn;
++	const char *name;
++};
++
++static const struct chip_id_map chip_names[] = {
++	{ .mid = 0x1f, .pn = 0x1e82, .name = "AT32AP700x" },
++};
++#define NR_CHIP_NAMES ARRAY_SIZE(chip_names)
++
+ static const char *cpu_names[] = {
+ 	"Morgan",
+-	"AP7000",
++	"AP7",
+ };
+ #define NR_CPU_NAMES ARRAY_SIZE(cpu_names)
+ 
+@@ -206,12 +218,32 @@ static const char *mmu_types[] = {
+ 	"MPU"
+ };
+ 
++static const char *cpu_feature_flags[] = {
++	"rmw", "dsp", "simd", "ocd", "perfctr", "java", "fpu",
++};
++
++static const char *get_chip_name(struct avr32_cpuinfo *cpu)
++{
++	unsigned int i;
++	unsigned int mid = avr32_get_manufacturer_id(cpu);
++	unsigned int pn = avr32_get_product_number(cpu);
++
++	for (i = 0; i < NR_CHIP_NAMES; i++) {
++		if (chip_names[i].mid == mid && chip_names[i].pn == pn)
++			return chip_names[i].name;
++	}
++
++	return "(unknown)";
++}
++
+ void __init setup_processor(void)
+ {
+ 	unsigned long config0, config1;
+ 	unsigned long features;
+ 	unsigned cpu_id, cpu_rev, arch_id, arch_rev, mmu_type;
++	unsigned device_id;
+ 	unsigned tmp;
++	unsigned i;
+ 
+ 	config0 = sysreg_read(CONFIG0);
+ 	config1 = sysreg_read(CONFIG1);
+@@ -221,11 +253,14 @@ void __init setup_processor(void)
+ 	arch_rev = SYSREG_BFEXT(AR, config0);
+ 	mmu_type = SYSREG_BFEXT(MMUT, config0);
+ 
++	device_id = ocd_read(DID);
++
+ 	boot_cpu_data.arch_type = arch_id;
+ 	boot_cpu_data.cpu_type = cpu_id;
+ 	boot_cpu_data.arch_revision = arch_rev;
+ 	boot_cpu_data.cpu_revision = cpu_rev;
+ 	boot_cpu_data.tlb_config = mmu_type;
++	boot_cpu_data.device_id = device_id;
+ 
+ 	tmp = SYSREG_BFEXT(ILSZ, config1);
+ 	if (tmp) {
+@@ -247,41 +282,34 @@ void __init setup_processor(void)
+ 		return;
+ 	}
+ 
+-	printk ("CPU: %s [%02x] revision %d (%s revision %d)\n",
++	printk ("CPU: %s chip revision %c\n", get_chip_name(&boot_cpu_data),
++			avr32_get_chip_revision(&boot_cpu_data) + 'A');
++	printk ("CPU: %s [%02x] core revision %d (%s arch revision %d)\n",
+ 		cpu_names[cpu_id], cpu_id, cpu_rev,
+ 		arch_names[arch_id], arch_rev);
+ 	printk ("CPU: MMU configuration: %s\n", mmu_types[mmu_type]);
+ 
+ 	printk ("CPU: features:");
+ 	features = 0;
+-	if (config0 & SYSREG_BIT(CONFIG0_R)) {
++	if (config0 & SYSREG_BIT(CONFIG0_R))
+ 		features |= AVR32_FEATURE_RMW;
+-		printk(" rmw");
+-	}
+-	if (config0 & SYSREG_BIT(CONFIG0_D)) {
++	if (config0 & SYSREG_BIT(CONFIG0_D))
+ 		features |= AVR32_FEATURE_DSP;
+-		printk(" dsp");
+-	}
+-	if (config0 & SYSREG_BIT(CONFIG0_S)) {
++	if (config0 & SYSREG_BIT(CONFIG0_S))
+ 		features |= AVR32_FEATURE_SIMD;
+-		printk(" simd");
+-	}
+-	if (config0 & SYSREG_BIT(CONFIG0_O)) {
++	if (config0 & SYSREG_BIT(CONFIG0_O))
+ 		features |= AVR32_FEATURE_OCD;
+-		printk(" ocd");
+-	}
+-	if (config0 & SYSREG_BIT(CONFIG0_P)) {
++	if (config0 & SYSREG_BIT(CONFIG0_P))
+ 		features |= AVR32_FEATURE_PCTR;
+-		printk(" perfctr");
+-	}
+-	if (config0 & SYSREG_BIT(CONFIG0_J)) {
++	if (config0 & SYSREG_BIT(CONFIG0_J))
+ 		features |= AVR32_FEATURE_JAVA;
+-		printk(" java");
+-	}
+-	if (config0 & SYSREG_BIT(CONFIG0_F)) {
++	if (config0 & SYSREG_BIT(CONFIG0_F))
+ 		features |= AVR32_FEATURE_FPU;
+-		printk(" fpu");
+-	}
++
++	for (i = 0; i < ARRAY_SIZE(cpu_feature_flags); i++)
++		if (features & (1 << i))
++			printk(" %s", cpu_feature_flags[i]);
++
+ 	printk("\n");
+ 	boot_cpu_data.features = features;
+ }
+@@ -291,6 +319,8 @@ static int c_show(struct seq_file *m, vo
+ {
+ 	unsigned int icache_size, dcache_size;
+ 	unsigned int cpu = smp_processor_id();
++	unsigned int freq;
++	unsigned int i;
+ 
+ 	icache_size = boot_cpu_data.icache.ways *
+ 		boot_cpu_data.icache.sets *
+@@ -301,15 +331,21 @@ static int c_show(struct seq_file *m, vo
+ 
+ 	seq_printf(m, "processor\t: %d\n", cpu);
+ 
++	seq_printf(m, "chip type\t: %s revision %c\n",
++			get_chip_name(&boot_cpu_data),
++			avr32_get_chip_revision(&boot_cpu_data) + 'A');
+ 	if (boot_cpu_data.arch_type < NR_ARCH_NAMES)
+-		seq_printf(m, "cpu family\t: %s revision %d\n",
++		seq_printf(m, "cpu arch\t: %s revision %d\n",
+ 			   arch_names[boot_cpu_data.arch_type],
+ 			   boot_cpu_data.arch_revision);
+ 	if (boot_cpu_data.cpu_type < NR_CPU_NAMES)
+-		seq_printf(m, "cpu type\t: %s revision %d\n",
++		seq_printf(m, "cpu core\t: %s revision %d\n",
+ 			   cpu_names[boot_cpu_data.cpu_type],
+ 			   boot_cpu_data.cpu_revision);
+ 
++	freq = (clk_get_rate(boot_cpu_data.clk) + 500) / 1000;
++	seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, freq % 1000);
++
+ 	seq_printf(m, "i-cache\t\t: %dK (%u ways x %u sets x %u)\n",
+ 		   icache_size >> 10,
+ 		   boot_cpu_data.icache.ways,
+@@ -320,7 +356,13 @@ static int c_show(struct seq_file *m, vo
+ 		   boot_cpu_data.dcache.ways,
+ 		   boot_cpu_data.dcache.sets,
+ 		   boot_cpu_data.dcache.linesz);
+-	seq_printf(m, "bogomips\t: %lu.%02lu\n",
++
++	seq_printf(m, "features\t:");
++	for (i = 0; i < ARRAY_SIZE(cpu_feature_flags); i++)
++		if (boot_cpu_data.features & (1 << i))
++			seq_printf(m, " %s", cpu_feature_flags[i]);
++
++	seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
+ 		   boot_cpu_data.loops_per_jiffy / (500000/HZ),
+ 		   (boot_cpu_data.loops_per_jiffy / (5000/HZ)) % 100);
+ 
+@@ -343,7 +385,7 @@ static void c_stop(struct seq_file *m, v
+ 
+ }
+ 
+-struct seq_operations cpuinfo_op = {
++const struct seq_operations cpuinfo_op = {
+ 	.start	= c_start,
+ 	.next	= c_next,
+ 	.stop	= c_stop,
+diff -Nrup linux-2.6.24/arch/avr32/kernel/dma-controller.c linux-avr32/arch/avr32/kernel/dma-controller.c
+--- linux-2.6.24/arch/avr32/kernel/dma-controller.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/dma-controller.c	2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,34 @@
++/*
++ * Preliminary DMA controller framework for AVR32
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <asm/dma-controller.h>
++
++static LIST_HEAD(controllers);
++
++int register_dma_controller(struct dma_controller *dmac)
++{
++	static int next_id;
++
++	dmac->id = next_id++;
++	list_add_tail(&dmac->list, &controllers);
++
++	return 0;
++}
++EXPORT_SYMBOL(register_dma_controller);
++
++struct dma_controller *find_dma_controller(int id)
++{
++	struct dma_controller *dmac;
++
++	list_for_each_entry(dmac, &controllers, list)
++		if (dmac->id == id)
++			return dmac;
++	return NULL;
++}
++EXPORT_SYMBOL(find_dma_controller);
+diff -Nrup linux-2.6.24/arch/avr32/kernel/irq.c linux-avr32/arch/avr32/kernel/irq.c
+--- linux-2.6.24/arch/avr32/kernel/irq.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/irq.c	2008-02-01 14:51:35.000000000 -0500
+@@ -25,6 +25,17 @@ void ack_bad_irq(unsigned int irq)
+ 	printk("unexpected IRQ %u\n", irq);
+ }
+ 
++/* May be overridden by platform code */
++int __weak nmi_enable(void)
++{
++	return -ENOSYS;
++}
++
++void __weak nmi_disable(void)
++{
++
++}
++
+ #ifdef CONFIG_PROC_FS
+ int show_interrupts(struct seq_file *p, void *v)
+ {
+diff -Nrup linux-2.6.24/arch/avr32/kernel/kprobes.c linux-avr32/arch/avr32/kernel/kprobes.c
+--- linux-2.6.24/arch/avr32/kernel/kprobes.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/kprobes.c	2008-02-01 14:51:35.000000000 -0500
+@@ -48,6 +48,7 @@ int __kprobes arch_prepare_kprobe(struct
+ void __kprobes arch_arm_kprobe(struct kprobe *p)
+ {
+ 	pr_debug("arming kprobe at %p\n", p->addr);
++	ocd_enable(NULL);
+ 	*p->addr = BREAKPOINT_INSTRUCTION;
+ 	flush_icache_range((unsigned long)p->addr,
+ 			   (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+@@ -56,6 +57,7 @@ void __kprobes arch_arm_kprobe(struct kp
+ void __kprobes arch_disarm_kprobe(struct kprobe *p)
+ {
+ 	pr_debug("disarming kprobe at %p\n", p->addr);
++	ocd_disable(NULL);
+ 	*p->addr = p->opcode;
+ 	flush_icache_range((unsigned long)p->addr,
+ 			   (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+@@ -260,9 +262,6 @@ int __kprobes longjmp_break_handler(stru
+ 
+ int __init arch_init_kprobes(void)
+ {
+-	printk("KPROBES: Enabling monitor mode (MM|DBE)...\n");
+-	ocd_write(DC, (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT));
+-
+ 	/* TODO: Register kretprobe trampoline */
+ 	return 0;
+ }
+diff -Nrup linux-2.6.24/arch/avr32/kernel/Makefile linux-avr32/arch/avr32/kernel/Makefile
+--- linux-2.6.24/arch/avr32/kernel/Makefile	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/Makefile	2008-02-01 14:51:35.000000000 -0500
+@@ -6,9 +6,11 @@ extra-y				:= head.o vmlinux.lds
+ 
+ obj-$(CONFIG_SUBARCH_AVR32B)	+= entry-avr32b.o
+ obj-y				+= syscall_table.o syscall-stubs.o irq.o
+-obj-y				+= setup.o traps.o semaphore.o ptrace.o
++obj-y				+= setup.o traps.o semaphore.o ocd.o ptrace.o
+ obj-y				+= signal.o sys_avr32.o process.o time.o
+ obj-y				+= init_task.o switch_to.o cpu.o
++obj-y				+= dma-controller.o
+ obj-$(CONFIG_MODULES)		+= module.o avr32_ksyms.o
+ obj-$(CONFIG_KPROBES)		+= kprobes.o
+ obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
++obj-$(CONFIG_NMI_DEBUGGING)	+= nmi_debug.o
+diff -Nrup linux-2.6.24/arch/avr32/kernel/nmi_debug.c linux-avr32/arch/avr32/kernel/nmi_debug.c
+--- linux-2.6.24/arch/avr32/kernel/nmi_debug.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/nmi_debug.c	2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,82 @@
++/*
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/delay.h>
++#include <linux/kdebug.h>
++#include <linux/notifier.h>
++#include <linux/sched.h>
++
++#include <asm/irq.h>
++
++enum nmi_action {
++	NMI_SHOW_STATE	= 1 << 0,
++	NMI_SHOW_REGS	= 1 << 1,
++	NMI_DIE		= 1 << 2,
++	NMI_DEBOUNCE	= 1 << 3,
++};
++
++static unsigned long nmi_actions;
++
++static int nmi_debug_notify(struct notifier_block *self,
++		unsigned long val, void *data)
++{
++	struct die_args *args = data;
++
++	if (likely(val != DIE_NMI))
++		return NOTIFY_DONE;
++
++	if (nmi_actions & NMI_SHOW_STATE)
++		show_state();
++	if (nmi_actions & NMI_SHOW_REGS)
++		show_regs(args->regs);
++	if (nmi_actions & NMI_DEBOUNCE)
++		mdelay(10);
++	if (nmi_actions & NMI_DIE)
++		return NOTIFY_BAD;
++
++	return NOTIFY_OK;
++}
++
++static struct notifier_block nmi_debug_nb = {
++	.notifier_call = nmi_debug_notify,
++};
++
++static int __init nmi_debug_setup(char *str)
++{
++	char *p, *sep;
++
++	register_die_notifier(&nmi_debug_nb);
++	if (nmi_enable()) {
++		printk(KERN_WARNING "Unable to enable NMI.\n");
++		return 0;
++	}
++
++	if (*str != '=')
++		return 0;
++
++	for (p = str + 1; *p; p = sep + 1) {
++		sep = strchr(p, ',');
++		if (sep)
++			*sep = 0;
++		if (strcmp(p, "state") == 0)
++			nmi_actions |= NMI_SHOW_STATE;
++		else if (strcmp(p, "regs") == 0)
++			nmi_actions |= NMI_SHOW_REGS;
++		else if (strcmp(p, "debounce") == 0)
++			nmi_actions |= NMI_DEBOUNCE;
++		else if (strcmp(p, "die") == 0)
++			nmi_actions |= NMI_DIE;
++		else
++			printk(KERN_WARNING "NMI: Unrecognized action `%s'\n",
++				p);
++		if (!sep)
++			break;
++	}
++
++	return 0;
++}
++__setup("nmi_debug", nmi_debug_setup);
+diff -Nrup linux-2.6.24/arch/avr32/kernel/ocd.c linux-avr32/arch/avr32/kernel/ocd.c
+--- linux-2.6.24/arch/avr32/kernel/ocd.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/ocd.c	2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,163 @@
++/*
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/spinlock.h>
++
++#include <asm/ocd.h>
++
++static long ocd_count;
++static spinlock_t ocd_lock;
++
++/**
++ * ocd_enable - enable on-chip debugging
++ * @child: task to be debugged
++ *
++ * If @child is non-NULL, ocd_enable() first checks if debugging has
++ * already been enabled for @child, and if it has, does nothing.
++ *
++ * If @child is NULL (e.g. when debugging the kernel), or debugging
++ * has not already been enabled for it, ocd_enable() increments the
++ * reference count and enables the debugging hardware.
++ */
++void ocd_enable(struct task_struct *child)
++{
++	u32 dc;
++
++	if (child)
++		pr_debug("ocd_enable: child=%s [%u]\n",
++				child->comm, child->pid);
++	else
++		pr_debug("ocd_enable (no child)\n");
++
++	if (!child || !test_and_set_tsk_thread_flag(child, TIF_DEBUG)) {
++		spin_lock(&ocd_lock);
++		ocd_count++;
++		dc = ocd_read(DC);
++		dc |= (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT);
++		ocd_write(DC, dc);
++		spin_unlock(&ocd_lock);
++	}
++}
++
++/**
++ * ocd_disable - disable on-chip debugging
++ * @child: task that was being debugged, but isn't anymore
++ *
++ * If @child is non-NULL, ocd_disable() checks if debugging is enabled
++ * for @child, and if it isn't, does nothing.
++ *
++ * If @child is NULL (e.g. when debugging the kernel), or debugging is
++ * enabled, ocd_disable() decrements the reference count, and if it
++ * reaches zero, disables the debugging hardware.
++ */
++void ocd_disable(struct task_struct *child)
++{
++	u32 dc;
++
++	if (!child)
++		pr_debug("ocd_disable (no child)\n");
++	else if (test_tsk_thread_flag(child, TIF_DEBUG))
++		pr_debug("ocd_disable: child=%s [%u]\n",
++				child->comm, child->pid);
++
++	if (!child || test_and_clear_tsk_thread_flag(child, TIF_DEBUG)) {
++		spin_lock(&ocd_lock);
++		ocd_count--;
++
++		WARN_ON(ocd_count < 0);
++
++		if (ocd_count <= 0) {
++			dc = ocd_read(DC);
++			dc &= ~((1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT));
++			ocd_write(DC, dc);
++		}
++		spin_unlock(&ocd_lock);
++	}
++}
++
++#ifdef CONFIG_DEBUG_FS
++#include <linux/debugfs.h>
++#include <linux/module.h>
++
++static struct dentry *ocd_debugfs_root;
++static struct dentry *ocd_debugfs_DC;
++static struct dentry *ocd_debugfs_DS;
++static struct dentry *ocd_debugfs_count;
++
++static u64 ocd_DC_get(void *data)
++{
++	return ocd_read(DC);
++}
++static void ocd_DC_set(void *data, u64 val)
++{
++	ocd_write(DC, val);
++}
++DEFINE_SIMPLE_ATTRIBUTE(fops_DC, ocd_DC_get, ocd_DC_set, "0x%08llx\n");
++
++static u64 ocd_DS_get(void *data)
++{
++	return ocd_read(DS);
++}
++DEFINE_SIMPLE_ATTRIBUTE(fops_DS, ocd_DS_get, NULL, "0x%08llx\n");
++
++static u64 ocd_count_get(void *data)
++{
++	return ocd_count;
++}
++DEFINE_SIMPLE_ATTRIBUTE(fops_count, ocd_count_get, NULL, "%lld\n");
++
++static void ocd_debugfs_init(void)
++{
++	struct dentry *root;
++
++	root = debugfs_create_dir("ocd", NULL);
++	if (IS_ERR(root) || !root)
++		goto err_root;
++	ocd_debugfs_root = root;
++
++	ocd_debugfs_DC = debugfs_create_file("DC", S_IRUSR | S_IWUSR,
++				root, NULL, &fops_DC);
++	if (!ocd_debugfs_DC)
++		goto err_DC;
++
++	ocd_debugfs_DS = debugfs_create_file("DS", S_IRUSR, root,
++				NULL, &fops_DS);
++	if (!ocd_debugfs_DS)
++		goto err_DS;
++
++	ocd_debugfs_count = debugfs_create_file("count", S_IRUSR, root,
++				NULL, &fops_count);
++	if (!ocd_debugfs_count)
++		goto err_count;
++
++	return;
++
++err_count:
++	debugfs_remove(ocd_debugfs_DS);
++err_DS:
++	debugfs_remove(ocd_debugfs_DC);
++err_DC:
++	debugfs_remove(ocd_debugfs_root);
++err_root:
++	printk(KERN_WARNING "OCD: Failed to create debugfs entries\n");
++}
++#else
++static inline void ocd_debugfs_init(void)
++{
++
++}
++#endif
++
++static int __init ocd_init(void)
++{
++	spin_lock_init(&ocd_lock);
++	ocd_debugfs_init();
++	return 0;
++}
++arch_initcall(ocd_init);
+diff -Nrup linux-2.6.24/arch/avr32/kernel/process.c linux-avr32/arch/avr32/kernel/process.c
+--- linux-2.6.24/arch/avr32/kernel/process.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/process.c	2008-02-01 14:51:35.000000000 -0500
+@@ -103,7 +103,7 @@ EXPORT_SYMBOL(kernel_thread);
+  */
+ void exit_thread(void)
+ {
+-	/* nothing to do */
++	ocd_disable(current);
+ }
+ 
+ void flush_thread(void)
+@@ -345,6 +345,9 @@ int copy_thread(int nr, unsigned long cl
+ 	p->thread.cpu_context.ksp = (unsigned long)childregs;
+ 	p->thread.cpu_context.pc = (unsigned long)ret_from_fork;
+ 
++	if ((clone_flags & CLONE_PTRACE) && test_thread_flag(TIF_DEBUG))
++		ocd_enable(p);
++
+ 	return 0;
+ }
+ 
+diff -Nrup linux-2.6.24/arch/avr32/kernel/ptrace.c linux-avr32/arch/avr32/kernel/ptrace.c
+--- linux-2.6.24/arch/avr32/kernel/ptrace.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/ptrace.c	2008-02-01 14:51:35.000000000 -0500
+@@ -58,6 +58,7 @@ void ptrace_disable(struct task_struct *
+ {
+ 	clear_tsk_thread_flag(child, TIF_SINGLE_STEP);
+ 	clear_tsk_thread_flag(child, TIF_BREAKPOINT);
++	ocd_disable(child);
+ }
+ 
+ /*
+@@ -144,10 +145,6 @@ long arch_ptrace(struct task_struct *chi
+ {
+ 	int ret;
+ 
+-	pr_debug("ptrace: Enabling monitor mode...\n");
+-	ocd_write(DC, ocd_read(DC) | (1 << OCD_DC_MM_BIT)
+-			| (1 << OCD_DC_DBE_BIT));
+-
+ 	switch (request) {
+ 	/* Read the word at location addr in the child process */
+ 	case PTRACE_PEEKTEXT:
+diff -Nrup linux-2.6.24/arch/avr32/kernel/setup.c linux-avr32/arch/avr32/kernel/setup.c
+--- linux-2.6.24/arch/avr32/kernel/setup.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/setup.c	2008-02-01 14:51:35.000000000 -0500
+@@ -273,6 +273,8 @@ static int __init early_parse_fbmem(char
+ 			printk(KERN_WARNING
+ 			       "Failed to allocate framebuffer memory\n");
+ 			fbmem_size = 0;
++		} else {
++			memset(__va(fbmem_start), 0, fbmem_size);
+ 		}
+ 	}
+ 
+diff -Nrup linux-2.6.24/arch/avr32/kernel/signal.c linux-avr32/arch/avr32/kernel/signal.c
+--- linux-2.6.24/arch/avr32/kernel/signal.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/signal.c	2008-02-01 14:51:35.000000000 -0500
+@@ -270,19 +270,12 @@ int do_signal(struct pt_regs *regs, sigs
+ 	if (!user_mode(regs))
+ 		return 0;
+ 
+-	if (try_to_freeze()) {
+-		signr = 0;
+-		if (!signal_pending(current))
+-			goto no_signal;
+-	}
+-
+ 	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ 		oldset = &current->saved_sigmask;
+ 	else if (!oldset)
+ 		oldset = &current->blocked;
+ 
+ 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+-no_signal:
+ 	if (syscall) {
+ 		switch (regs->r12) {
+ 		case -ERESTART_RESTARTBLOCK:
+diff -Nrup linux-2.6.24/arch/avr32/kernel/traps.c linux-avr32/arch/avr32/kernel/traps.c
+--- linux-2.6.24/arch/avr32/kernel/traps.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/traps.c	2008-02-01 14:51:35.000000000 -0500
+@@ -9,6 +9,7 @@
+ #include <linux/bug.h>
+ #include <linux/init.h>
+ #include <linux/kallsyms.h>
++#include <linux/kdebug.h>
+ #include <linux/module.h>
+ #include <linux/notifier.h>
+ #include <linux/sched.h>
+@@ -107,9 +108,23 @@ void _exception(long signr, struct pt_re
+ 
+ asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
+ {
+-	printk(KERN_ALERT "Got Non-Maskable Interrupt, dumping regs\n");
+-	show_regs_log_lvl(regs, KERN_ALERT);
+-	show_stack_log_lvl(current, regs->sp, regs, KERN_ALERT);
++	int ret;
++
++	nmi_enter();
++
++	ret = notify_die(DIE_NMI, "NMI", regs, 0, ecr, SIGINT);
++	switch (ret) {
++	case NOTIFY_OK:
++	case NOTIFY_STOP:
++		return;
++	case NOTIFY_BAD:
++		die("Fatal Non-Maskable Interrupt", regs, SIGINT);
++	default:
++		break;
++	}
++
++	printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
++	nmi_disable();
+ }
+ 
+ asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
+diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/at32ap7000.c linux-avr32/arch/avr32/mach-at32ap/at32ap7000.c
+--- linux-2.6.24/arch/avr32/mach-at32ap/at32ap7000.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/mach-at32ap/at32ap7000.c	1969-12-31 19:00:00.000000000 -0500
+@@ -1,1730 +0,0 @@
+-/*
+- * Copyright (C) 2005-2006 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-#include <linux/clk.h>
+-#include <linux/fb.h>
+-#include <linux/init.h>
+-#include <linux/platform_device.h>
+-#include <linux/dma-mapping.h>
+-#include <linux/spi/spi.h>
+-
+-#include <asm/io.h>
+-
+-#include <asm/arch/at32ap7000.h>
+-#include <asm/arch/board.h>
+-#include <asm/arch/portmux.h>
+-
+-#include <video/atmel_lcdc.h>
+-
+-#include "clock.h"
+-#include "hmatrix.h"
+-#include "pio.h"
+-#include "pm.h"
+-
+-
+-#define PBMEM(base)					\
+-	{						\
+-		.start		= base,			\
+-		.end		= base + 0x3ff,		\
+-		.flags		= IORESOURCE_MEM,	\
+-	}
+-#define IRQ(num)					\
+-	{						\
+-		.start		= num,			\
+-		.end		= num,			\
+-		.flags		= IORESOURCE_IRQ,	\
+-	}
+-#define NAMED_IRQ(num, _name)				\
+-	{						\
+-		.start		= num,			\
+-		.end		= num,			\
+-		.name		= _name,		\
+-		.flags		= IORESOURCE_IRQ,	\
+-	}
+-
+-/* REVISIT these assume *every* device supports DMA, but several
+- * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
+- */
+-#define DEFINE_DEV(_name, _id)					\
+-static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
+-static struct platform_device _name##_id##_device = {		\
+-	.name		= #_name,				\
+-	.id		= _id,					\
+-	.dev		= {					\
+-		.dma_mask = &_name##_id##_dma_mask,		\
+-		.coherent_dma_mask = DMA_32BIT_MASK,		\
+-	},							\
+-	.resource	= _name##_id##_resource,		\
+-	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
+-}
+-#define DEFINE_DEV_DATA(_name, _id)				\
+-static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
+-static struct platform_device _name##_id##_device = {		\
+-	.name		= #_name,				\
+-	.id		= _id,					\
+-	.dev		= {					\
+-		.dma_mask = &_name##_id##_dma_mask,		\
+-		.platform_data	= &_name##_id##_data,		\
+-		.coherent_dma_mask = DMA_32BIT_MASK,		\
+-	},							\
+-	.resource	= _name##_id##_resource,		\
+-	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
+-}
+-
+-#define select_peripheral(pin, periph, flags)			\
+-	at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
+-
+-#define DEV_CLK(_name, devname, bus, _index)			\
+-static struct clk devname##_##_name = {				\
+-	.name		= #_name,				\
+-	.dev		= &devname##_device.dev,		\
+-	.parent		= &bus##_clk,				\
+-	.mode		= bus##_clk_mode,			\
+-	.get_rate	= bus##_clk_get_rate,			\
+-	.index		= _index,				\
+-}
+-
+-static DEFINE_SPINLOCK(pm_lock);
+-
+-unsigned long at32ap7000_osc_rates[3] = {
+-	[0] = 32768,
+-	/* FIXME: these are ATSTK1002-specific */
+-	[1] = 20000000,
+-	[2] = 12000000,
+-};
+-
+-static unsigned long osc_get_rate(struct clk *clk)
+-{
+-	return at32ap7000_osc_rates[clk->index];
+-}
+-
+-static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
+-{
+-	unsigned long div, mul, rate;
+-
+-	if (!(control & PM_BIT(PLLEN)))
+-		return 0;
+-
+-	div = PM_BFEXT(PLLDIV, control) + 1;
+-	mul = PM_BFEXT(PLLMUL, control) + 1;
+-
+-	rate = clk->parent->get_rate(clk->parent);
+-	rate = (rate + div / 2) / div;
+-	rate *= mul;
+-
+-	return rate;
+-}
+-
+-static unsigned long pll0_get_rate(struct clk *clk)
+-{
+-	u32 control;
+-
+-	control = pm_readl(PLL0);
+-
+-	return pll_get_rate(clk, control);
+-}
+-
+-static unsigned long pll1_get_rate(struct clk *clk)
+-{
+-	u32 control;
+-
+-	control = pm_readl(PLL1);
+-
+-	return pll_get_rate(clk, control);
+-}
+-
+-/*
+- * The AT32AP7000 has five primary clock sources: One 32kHz
+- * oscillator, two crystal oscillators and two PLLs.
+- */
+-static struct clk osc32k = {
+-	.name		= "osc32k",
+-	.get_rate	= osc_get_rate,
+-	.users		= 1,
+-	.index		= 0,
+-};
+-static struct clk osc0 = {
+-	.name		= "osc0",
+-	.get_rate	= osc_get_rate,
+-	.users		= 1,
+-	.index		= 1,
+-};
+-static struct clk osc1 = {
+-	.name		= "osc1",
+-	.get_rate	= osc_get_rate,
+-	.index		= 2,
+-};
+-static struct clk pll0 = {
+-	.name		= "pll0",
+-	.get_rate	= pll0_get_rate,
+-	.parent		= &osc0,
+-};
+-static struct clk pll1 = {
+-	.name		= "pll1",
+-	.get_rate	= pll1_get_rate,
+-	.parent		= &osc0,
+-};
+-
+-/*
+- * The main clock can be either osc0 or pll0.  The boot loader may
+- * have chosen one for us, so we don't really know which one until we
+- * have a look at the SM.
+- */
+-static struct clk *main_clock;
+-
+-/*
+- * Synchronous clocks are generated from the main clock. The clocks
+- * must satisfy the constraint
+- *   fCPU >= fHSB >= fPB
+- * i.e. each clock must not be faster than its parent.
+- */
+-static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
+-{
+-	return main_clock->get_rate(main_clock) >> shift;
+-};
+-
+-static void cpu_clk_mode(struct clk *clk, int enabled)
+-{
+-	unsigned long flags;
+-	u32 mask;
+-
+-	spin_lock_irqsave(&pm_lock, flags);
+-	mask = pm_readl(CPU_MASK);
+-	if (enabled)
+-		mask |= 1 << clk->index;
+-	else
+-		mask &= ~(1 << clk->index);
+-	pm_writel(CPU_MASK, mask);
+-	spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long cpu_clk_get_rate(struct clk *clk)
+-{
+-	unsigned long cksel, shift = 0;
+-
+-	cksel = pm_readl(CKSEL);
+-	if (cksel & PM_BIT(CPUDIV))
+-		shift = PM_BFEXT(CPUSEL, cksel) + 1;
+-
+-	return bus_clk_get_rate(clk, shift);
+-}
+-
+-static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
+-{
+-	u32 control;
+-	unsigned long parent_rate, child_div, actual_rate, div;
+-
+-	parent_rate = clk->parent->get_rate(clk->parent);
+-	control = pm_readl(CKSEL);
+-
+-	if (control & PM_BIT(HSBDIV))
+-		child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
+-	else
+-		child_div = 1;
+-
+-	if (rate > 3 * (parent_rate / 4) || child_div == 1) {
+-		actual_rate = parent_rate;
+-		control &= ~PM_BIT(CPUDIV);
+-	} else {
+-		unsigned int cpusel;
+-		div = (parent_rate + rate / 2) / rate;
+-		if (div > child_div)
+-			div = child_div;
+-		cpusel = (div > 1) ? (fls(div) - 2) : 0;
+-		control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
+-		actual_rate = parent_rate / (1 << (cpusel + 1));
+-	}
+-
+-	pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
+-			clk->name, rate, actual_rate);
+-
+-	if (apply)
+-		pm_writel(CKSEL, control);
+-
+-	return actual_rate;
+-}
+-
+-static void hsb_clk_mode(struct clk *clk, int enabled)
+-{
+-	unsigned long flags;
+-	u32 mask;
+-
+-	spin_lock_irqsave(&pm_lock, flags);
+-	mask = pm_readl(HSB_MASK);
+-	if (enabled)
+-		mask |= 1 << clk->index;
+-	else
+-		mask &= ~(1 << clk->index);
+-	pm_writel(HSB_MASK, mask);
+-	spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long hsb_clk_get_rate(struct clk *clk)
+-{
+-	unsigned long cksel, shift = 0;
+-
+-	cksel = pm_readl(CKSEL);
+-	if (cksel & PM_BIT(HSBDIV))
+-		shift = PM_BFEXT(HSBSEL, cksel) + 1;
+-
+-	return bus_clk_get_rate(clk, shift);
+-}
+-
+-static void pba_clk_mode(struct clk *clk, int enabled)
+-{
+-	unsigned long flags;
+-	u32 mask;
+-
+-	spin_lock_irqsave(&pm_lock, flags);
+-	mask = pm_readl(PBA_MASK);
+-	if (enabled)
+-		mask |= 1 << clk->index;
+-	else
+-		mask &= ~(1 << clk->index);
+-	pm_writel(PBA_MASK, mask);
+-	spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long pba_clk_get_rate(struct clk *clk)
+-{
+-	unsigned long cksel, shift = 0;
+-
+-	cksel = pm_readl(CKSEL);
+-	if (cksel & PM_BIT(PBADIV))
+-		shift = PM_BFEXT(PBASEL, cksel) + 1;
+-
+-	return bus_clk_get_rate(clk, shift);
+-}
+-
+-static void pbb_clk_mode(struct clk *clk, int enabled)
+-{
+-	unsigned long flags;
+-	u32 mask;
+-
+-	spin_lock_irqsave(&pm_lock, flags);
+-	mask = pm_readl(PBB_MASK);
+-	if (enabled)
+-		mask |= 1 << clk->index;
+-	else
+-		mask &= ~(1 << clk->index);
+-	pm_writel(PBB_MASK, mask);
+-	spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long pbb_clk_get_rate(struct clk *clk)
+-{
+-	unsigned long cksel, shift = 0;
+-
+-	cksel = pm_readl(CKSEL);
+-	if (cksel & PM_BIT(PBBDIV))
+-		shift = PM_BFEXT(PBBSEL, cksel) + 1;
+-
+-	return bus_clk_get_rate(clk, shift);
+-}
+-
+-static struct clk cpu_clk = {
+-	.name		= "cpu",
+-	.get_rate	= cpu_clk_get_rate,
+-	.set_rate	= cpu_clk_set_rate,
+-	.users		= 1,
+-};
+-static struct clk hsb_clk = {
+-	.name		= "hsb",
+-	.parent		= &cpu_clk,
+-	.get_rate	= hsb_clk_get_rate,
+-};
+-static struct clk pba_clk = {
+-	.name		= "pba",
+-	.parent		= &hsb_clk,
+-	.mode		= hsb_clk_mode,
+-	.get_rate	= pba_clk_get_rate,
+-	.index		= 1,
+-};
+-static struct clk pbb_clk = {
+-	.name		= "pbb",
+-	.parent		= &hsb_clk,
+-	.mode		= hsb_clk_mode,
+-	.get_rate	= pbb_clk_get_rate,
+-	.users		= 1,
+-	.index		= 2,
+-};
+-
+-/* --------------------------------------------------------------------
+- *  Generic Clock operations
+- * -------------------------------------------------------------------- */
+-
+-static void genclk_mode(struct clk *clk, int enabled)
+-{
+-	u32 control;
+-
+-	control = pm_readl(GCCTRL(clk->index));
+-	if (enabled)
+-		control |= PM_BIT(CEN);
+-	else
+-		control &= ~PM_BIT(CEN);
+-	pm_writel(GCCTRL(clk->index), control);
+-}
+-
+-static unsigned long genclk_get_rate(struct clk *clk)
+-{
+-	u32 control;
+-	unsigned long div = 1;
+-
+-	control = pm_readl(GCCTRL(clk->index));
+-	if (control & PM_BIT(DIVEN))
+-		div = 2 * (PM_BFEXT(DIV, control) + 1);
+-
+-	return clk->parent->get_rate(clk->parent) / div;
+-}
+-
+-static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
+-{
+-	u32 control;
+-	unsigned long parent_rate, actual_rate, div;
+-
+-	parent_rate = clk->parent->get_rate(clk->parent);
+-	control = pm_readl(GCCTRL(clk->index));
+-
+-	if (rate > 3 * parent_rate / 4) {
+-		actual_rate = parent_rate;
+-		control &= ~PM_BIT(DIVEN);
+-	} else {
+-		div = (parent_rate + rate) / (2 * rate) - 1;
+-		control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
+-		actual_rate = parent_rate / (2 * (div + 1));
+-	}
+-
+-	dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
+-		clk->name, rate, actual_rate);
+-
+-	if (apply)
+-		pm_writel(GCCTRL(clk->index), control);
+-
+-	return actual_rate;
+-}
+-
+-int genclk_set_parent(struct clk *clk, struct clk *parent)
+-{
+-	u32 control;
+-
+-	dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
+-		clk->name, parent->name, clk->parent->name);
+-
+-	control = pm_readl(GCCTRL(clk->index));
+-
+-	if (parent == &osc1 || parent == &pll1)
+-		control |= PM_BIT(OSCSEL);
+-	else if (parent == &osc0 || parent == &pll0)
+-		control &= ~PM_BIT(OSCSEL);
+-	else
+-		return -EINVAL;
+-
+-	if (parent == &pll0 || parent == &pll1)
+-		control |= PM_BIT(PLLSEL);
+-	else
+-		control &= ~PM_BIT(PLLSEL);
+-
+-	pm_writel(GCCTRL(clk->index), control);
+-	clk->parent = parent;
+-
+-	return 0;
+-}
+-
+-static void __init genclk_init_parent(struct clk *clk)
+-{
+-	u32 control;
+-	struct clk *parent;
+-
+-	BUG_ON(clk->index > 7);
+-
+-	control = pm_readl(GCCTRL(clk->index));
+-	if (control & PM_BIT(OSCSEL))
+-		parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
+-	else
+-		parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
+-
+-	clk->parent = parent;
+-}
+-
+-/* --------------------------------------------------------------------
+- *  System peripherals
+- * -------------------------------------------------------------------- */
+-static struct resource at32_pm0_resource[] = {
+-	{
+-		.start	= 0xfff00000,
+-		.end	= 0xfff0007f,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	IRQ(20),
+-};
+-
+-static struct resource at32ap700x_rtc0_resource[] = {
+-	{
+-		.start	= 0xfff00080,
+-		.end	= 0xfff000af,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	IRQ(21),
+-};
+-
+-static struct resource at32_wdt0_resource[] = {
+-	{
+-		.start	= 0xfff000b0,
+-		.end	= 0xfff000cf,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-};
+-
+-static struct resource at32_eic0_resource[] = {
+-	{
+-		.start	= 0xfff00100,
+-		.end	= 0xfff0013f,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	IRQ(19),
+-};
+-
+-DEFINE_DEV(at32_pm, 0);
+-DEFINE_DEV(at32ap700x_rtc, 0);
+-DEFINE_DEV(at32_wdt, 0);
+-DEFINE_DEV(at32_eic, 0);
+-
+-/*
+- * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
+- * is always running.
+- */
+-static struct clk at32_pm_pclk = {
+-	.name		= "pclk",
+-	.dev		= &at32_pm0_device.dev,
+-	.parent		= &pbb_clk,
+-	.mode		= pbb_clk_mode,
+-	.get_rate	= pbb_clk_get_rate,
+-	.users		= 1,
+-	.index		= 0,
+-};
+-
+-static struct resource intc0_resource[] = {
+-	PBMEM(0xfff00400),
+-};
+-struct platform_device at32_intc0_device = {
+-	.name		= "intc",
+-	.id		= 0,
+-	.resource	= intc0_resource,
+-	.num_resources	= ARRAY_SIZE(intc0_resource),
+-};
+-DEV_CLK(pclk, at32_intc0, pbb, 1);
+-
+-static struct clk ebi_clk = {
+-	.name		= "ebi",
+-	.parent		= &hsb_clk,
+-	.mode		= hsb_clk_mode,
+-	.get_rate	= hsb_clk_get_rate,
+-	.users		= 1,
+-};
+-static struct clk hramc_clk = {
+-	.name		= "hramc",
+-	.parent		= &hsb_clk,
+-	.mode		= hsb_clk_mode,
+-	.get_rate	= hsb_clk_get_rate,
+-	.users		= 1,
+-	.index		= 3,
+-};
+-
+-static struct resource smc0_resource[] = {
+-	PBMEM(0xfff03400),
+-};
+-DEFINE_DEV(smc, 0);
+-DEV_CLK(pclk, smc0, pbb, 13);
+-DEV_CLK(mck, smc0, hsb, 0);
+-
+-static struct platform_device pdc_device = {
+-	.name		= "pdc",
+-	.id		= 0,
+-};
+-DEV_CLK(hclk, pdc, hsb, 4);
+-DEV_CLK(pclk, pdc, pba, 16);
+-
+-static struct clk pico_clk = {
+-	.name		= "pico",
+-	.parent		= &cpu_clk,
+-	.mode		= cpu_clk_mode,
+-	.get_rate	= cpu_clk_get_rate,
+-	.users		= 1,
+-};
+-
+-static struct resource dmaca0_resource[] = {
+-	{
+-		.start	= 0xff200000,
+-		.end	= 0xff20ffff,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	IRQ(2),
+-};
+-DEFINE_DEV(dmaca, 0);
+-DEV_CLK(hclk, dmaca0, hsb, 10);
+-
+-/* --------------------------------------------------------------------
+- * HMATRIX
+- * -------------------------------------------------------------------- */
+-
+-static struct clk hmatrix_clk = {
+-	.name		= "hmatrix_clk",
+-	.parent		= &pbb_clk,
+-	.mode		= pbb_clk_mode,
+-	.get_rate	= pbb_clk_get_rate,
+-	.index		= 2,
+-	.users		= 1,
+-};
+-#define HMATRIX_BASE	((void __iomem *)0xfff00800)
+-
+-#define hmatrix_readl(reg)					\
+-	__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
+-#define hmatrix_writel(reg,value)				\
+-	__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
+-
+-/*
+- * Set bits in the HMATRIX Special Function Register (SFR) used by the
+- * External Bus Interface (EBI). This can be used to enable special
+- * features like CompactFlash support, NAND Flash support, etc. on
+- * certain chipselects.
+- */
+-static inline void set_ebi_sfr_bits(u32 mask)
+-{
+-	u32 sfr;
+-
+-	clk_enable(&hmatrix_clk);
+-	sfr = hmatrix_readl(SFR4);
+-	sfr |= mask;
+-	hmatrix_writel(SFR4, sfr);
+-	clk_disable(&hmatrix_clk);
+-}
+-
+-/* --------------------------------------------------------------------
+- *  System Timer/Counter (TC)
+- * -------------------------------------------------------------------- */
+-static struct resource at32_systc0_resource[] = {
+-	PBMEM(0xfff00c00),
+-	IRQ(22),
+-};
+-struct platform_device at32_systc0_device = {
+-	.name		= "systc",
+-	.id		= 0,
+-	.resource	= at32_systc0_resource,
+-	.num_resources	= ARRAY_SIZE(at32_systc0_resource),
+-};
+-DEV_CLK(pclk, at32_systc0, pbb, 3);
+-
+-/* --------------------------------------------------------------------
+- *  PIO
+- * -------------------------------------------------------------------- */
+-
+-static struct resource pio0_resource[] = {
+-	PBMEM(0xffe02800),
+-	IRQ(13),
+-};
+-DEFINE_DEV(pio, 0);
+-DEV_CLK(mck, pio0, pba, 10);
+-
+-static struct resource pio1_resource[] = {
+-	PBMEM(0xffe02c00),
+-	IRQ(14),
+-};
+-DEFINE_DEV(pio, 1);
+-DEV_CLK(mck, pio1, pba, 11);
+-
+-static struct resource pio2_resource[] = {
+-	PBMEM(0xffe03000),
+-	IRQ(15),
+-};
+-DEFINE_DEV(pio, 2);
+-DEV_CLK(mck, pio2, pba, 12);
+-
+-static struct resource pio3_resource[] = {
+-	PBMEM(0xffe03400),
+-	IRQ(16),
+-};
+-DEFINE_DEV(pio, 3);
+-DEV_CLK(mck, pio3, pba, 13);
+-
+-static struct resource pio4_resource[] = {
+-	PBMEM(0xffe03800),
+-	IRQ(17),
+-};
+-DEFINE_DEV(pio, 4);
+-DEV_CLK(mck, pio4, pba, 14);
+-
+-void __init at32_add_system_devices(void)
+-{
+-	platform_device_register(&at32_pm0_device);
+-	platform_device_register(&at32_intc0_device);
+-	platform_device_register(&at32ap700x_rtc0_device);
+-	platform_device_register(&at32_wdt0_device);
+-	platform_device_register(&at32_eic0_device);
+-	platform_device_register(&smc0_device);
+-	platform_device_register(&pdc_device);
+-	platform_device_register(&dmaca0_device);
+-
+-	platform_device_register(&at32_systc0_device);
+-
+-	platform_device_register(&pio0_device);
+-	platform_device_register(&pio1_device);
+-	platform_device_register(&pio2_device);
+-	platform_device_register(&pio3_device);
+-	platform_device_register(&pio4_device);
+-}
+-
+-/* --------------------------------------------------------------------
+- *  USART
+- * -------------------------------------------------------------------- */
+-
+-static struct atmel_uart_data atmel_usart0_data = {
+-	.use_dma_tx	= 1,
+-	.use_dma_rx	= 1,
+-};
+-static struct resource atmel_usart0_resource[] = {
+-	PBMEM(0xffe00c00),
+-	IRQ(6),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 0);
+-DEV_CLK(usart, atmel_usart0, pba, 3);
+-
+-static struct atmel_uart_data atmel_usart1_data = {
+-	.use_dma_tx	= 1,
+-	.use_dma_rx	= 1,
+-};
+-static struct resource atmel_usart1_resource[] = {
+-	PBMEM(0xffe01000),
+-	IRQ(7),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 1);
+-DEV_CLK(usart, atmel_usart1, pba, 4);
+-
+-static struct atmel_uart_data atmel_usart2_data = {
+-	.use_dma_tx	= 1,
+-	.use_dma_rx	= 1,
+-};
+-static struct resource atmel_usart2_resource[] = {
+-	PBMEM(0xffe01400),
+-	IRQ(8),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 2);
+-DEV_CLK(usart, atmel_usart2, pba, 5);
+-
+-static struct atmel_uart_data atmel_usart3_data = {
+-	.use_dma_tx	= 1,
+-	.use_dma_rx	= 1,
+-};
+-static struct resource atmel_usart3_resource[] = {
+-	PBMEM(0xffe01800),
+-	IRQ(9),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 3);
+-DEV_CLK(usart, atmel_usart3, pba, 6);
+-
+-static inline void configure_usart0_pins(void)
+-{
+-	select_peripheral(PA(8),  PERIPH_B, 0);	/* RXD	*/
+-	select_peripheral(PA(9),  PERIPH_B, 0);	/* TXD	*/
+-}
+-
+-static inline void configure_usart1_pins(void)
+-{
+-	select_peripheral(PA(17), PERIPH_A, 0);	/* RXD	*/
+-	select_peripheral(PA(18), PERIPH_A, 0);	/* TXD	*/
+-}
+-
+-static inline void configure_usart2_pins(void)
+-{
+-	select_peripheral(PB(26), PERIPH_B, 0);	/* RXD	*/
+-	select_peripheral(PB(27), PERIPH_B, 0);	/* TXD	*/
+-}
+-
+-static inline void configure_usart3_pins(void)
+-{
+-	select_peripheral(PB(18), PERIPH_B, 0);	/* RXD	*/
+-	select_peripheral(PB(17), PERIPH_B, 0);	/* TXD	*/
+-}
+-
+-static struct platform_device *__initdata at32_usarts[4];
+-
+-void __init at32_map_usart(unsigned int hw_id, unsigned int line)
+-{
+-	struct platform_device *pdev;
+-
+-	switch (hw_id) {
+-	case 0:
+-		pdev = &atmel_usart0_device;
+-		configure_usart0_pins();
+-		break;
+-	case 1:
+-		pdev = &atmel_usart1_device;
+-		configure_usart1_pins();
+-		break;
+-	case 2:
+-		pdev = &atmel_usart2_device;
+-		configure_usart2_pins();
+-		break;
+-	case 3:
+-		pdev = &atmel_usart3_device;
+-		configure_usart3_pins();
+-		break;
+-	default:
+-		return;
+-	}
+-
+-	if (PXSEG(pdev->resource[0].start) == P4SEG) {
+-		/* Addresses in the P4 segment are permanently mapped 1:1 */
+-		struct atmel_uart_data *data = pdev->dev.platform_data;
+-		data->regs = (void __iomem *)pdev->resource[0].start;
+-	}
+-
+-	pdev->id = line;
+-	at32_usarts[line] = pdev;
+-}
+-
+-struct platform_device *__init at32_add_device_usart(unsigned int id)
+-{
+-	platform_device_register(at32_usarts[id]);
+-	return at32_usarts[id];
+-}
+-
+-struct platform_device *atmel_default_console_device;
+-
+-void __init at32_setup_serial_console(unsigned int usart_id)
+-{
+-	atmel_default_console_device = at32_usarts[usart_id];
+-}
+-
+-/* --------------------------------------------------------------------
+- *  Ethernet
+- * -------------------------------------------------------------------- */
+-
+-static struct eth_platform_data macb0_data;
+-static struct resource macb0_resource[] = {
+-	PBMEM(0xfff01800),
+-	IRQ(25),
+-};
+-DEFINE_DEV_DATA(macb, 0);
+-DEV_CLK(hclk, macb0, hsb, 8);
+-DEV_CLK(pclk, macb0, pbb, 6);
+-
+-static struct eth_platform_data macb1_data;
+-static struct resource macb1_resource[] = {
+-	PBMEM(0xfff01c00),
+-	IRQ(26),
+-};
+-DEFINE_DEV_DATA(macb, 1);
+-DEV_CLK(hclk, macb1, hsb, 9);
+-DEV_CLK(pclk, macb1, pbb, 7);
+-
+-struct platform_device *__init
+-at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
+-{
+-	struct platform_device *pdev;
+-
+-	switch (id) {
+-	case 0:
+-		pdev = &macb0_device;
+-
+-		select_peripheral(PC(3),  PERIPH_A, 0);	/* TXD0	*/
+-		select_peripheral(PC(4),  PERIPH_A, 0);	/* TXD1	*/
+-		select_peripheral(PC(7),  PERIPH_A, 0);	/* TXEN	*/
+-		select_peripheral(PC(8),  PERIPH_A, 0);	/* TXCK */
+-		select_peripheral(PC(9),  PERIPH_A, 0);	/* RXD0	*/
+-		select_peripheral(PC(10), PERIPH_A, 0);	/* RXD1	*/
+-		select_peripheral(PC(13), PERIPH_A, 0);	/* RXER	*/
+-		select_peripheral(PC(15), PERIPH_A, 0);	/* RXDV	*/
+-		select_peripheral(PC(16), PERIPH_A, 0);	/* MDC	*/
+-		select_peripheral(PC(17), PERIPH_A, 0);	/* MDIO	*/
+-
+-		if (!data->is_rmii) {
+-			select_peripheral(PC(0),  PERIPH_A, 0);	/* COL	*/
+-			select_peripheral(PC(1),  PERIPH_A, 0);	/* CRS	*/
+-			select_peripheral(PC(2),  PERIPH_A, 0);	/* TXER	*/
+-			select_peripheral(PC(5),  PERIPH_A, 0);	/* TXD2	*/
+-			select_peripheral(PC(6),  PERIPH_A, 0);	/* TXD3 */
+-			select_peripheral(PC(11), PERIPH_A, 0);	/* RXD2	*/
+-			select_peripheral(PC(12), PERIPH_A, 0);	/* RXD3	*/
+-			select_peripheral(PC(14), PERIPH_A, 0);	/* RXCK	*/
+-			select_peripheral(PC(18), PERIPH_A, 0);	/* SPD	*/
+-		}
+-		break;
+-
+-	case 1:
+-		pdev = &macb1_device;
+-
+-		select_peripheral(PD(13), PERIPH_B, 0);		/* TXD0	*/
+-		select_peripheral(PD(14), PERIPH_B, 0);		/* TXD1	*/
+-		select_peripheral(PD(11), PERIPH_B, 0);		/* TXEN	*/
+-		select_peripheral(PD(12), PERIPH_B, 0);		/* TXCK */
+-		select_peripheral(PD(10), PERIPH_B, 0);		/* RXD0	*/
+-		select_peripheral(PD(6),  PERIPH_B, 0);		/* RXD1	*/
+-		select_peripheral(PD(5),  PERIPH_B, 0);		/* RXER	*/
+-		select_peripheral(PD(4),  PERIPH_B, 0);		/* RXDV	*/
+-		select_peripheral(PD(3),  PERIPH_B, 0);		/* MDC	*/
+-		select_peripheral(PD(2),  PERIPH_B, 0);		/* MDIO	*/
+-
+-		if (!data->is_rmii) {
+-			select_peripheral(PC(19), PERIPH_B, 0);	/* COL	*/
+-			select_peripheral(PC(23), PERIPH_B, 0);	/* CRS	*/
+-			select_peripheral(PC(26), PERIPH_B, 0);	/* TXER	*/
+-			select_peripheral(PC(27), PERIPH_B, 0);	/* TXD2	*/
+-			select_peripheral(PC(28), PERIPH_B, 0);	/* TXD3 */
+-			select_peripheral(PC(29), PERIPH_B, 0);	/* RXD2	*/
+-			select_peripheral(PC(30), PERIPH_B, 0);	/* RXD3	*/
+-			select_peripheral(PC(24), PERIPH_B, 0);	/* RXCK	*/
+-			select_peripheral(PD(15), PERIPH_B, 0);	/* SPD	*/
+-		}
+-		break;
+-
+-	default:
+-		return NULL;
+-	}
+-
+-	memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
+-	platform_device_register(pdev);
+-
+-	return pdev;
+-}
+-
+-/* --------------------------------------------------------------------
+- *  SPI
+- * -------------------------------------------------------------------- */
+-static struct resource atmel_spi0_resource[] = {
+-	PBMEM(0xffe00000),
+-	IRQ(3),
+-};
+-DEFINE_DEV(atmel_spi, 0);
+-DEV_CLK(spi_clk, atmel_spi0, pba, 0);
+-
+-static struct resource atmel_spi1_resource[] = {
+-	PBMEM(0xffe00400),
+-	IRQ(4),
+-};
+-DEFINE_DEV(atmel_spi, 1);
+-DEV_CLK(spi_clk, atmel_spi1, pba, 1);
+-
+-static void __init
+-at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
+-		      unsigned int n, const u8 *pins)
+-{
+-	unsigned int pin, mode;
+-
+-	for (; n; n--, b++) {
+-		b->bus_num = bus_num;
+-		if (b->chip_select >= 4)
+-			continue;
+-		pin = (unsigned)b->controller_data;
+-		if (!pin) {
+-			pin = pins[b->chip_select];
+-			b->controller_data = (void *)pin;
+-		}
+-		mode = AT32_GPIOF_OUTPUT;
+-		if (!(b->mode & SPI_CS_HIGH))
+-			mode |= AT32_GPIOF_HIGH;
+-		at32_select_gpio(pin, mode);
+-	}
+-}
+-
+-struct platform_device *__init
+-at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+-{
+-	/*
+-	 * Manage the chipselects as GPIOs, normally using the same pins
+-	 * the SPI controller expects; but boards can use other pins.
+-	 */
+-	static u8 __initdata spi0_pins[] =
+-		{ GPIO_PIN_PA(3), GPIO_PIN_PA(4),
+-		  GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
+-	static u8 __initdata spi1_pins[] =
+-		{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
+-		  GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
+-	struct platform_device *pdev;
+-
+-	switch (id) {
+-	case 0:
+-		pdev = &atmel_spi0_device;
+-		select_peripheral(PA(0),  PERIPH_A, 0);	/* MISO	 */
+-		select_peripheral(PA(1),  PERIPH_A, 0);	/* MOSI	 */
+-		select_peripheral(PA(2),  PERIPH_A, 0);	/* SCK	 */
+-		at32_spi_setup_slaves(0, b, n, spi0_pins);
+-		break;
+-
+-	case 1:
+-		pdev = &atmel_spi1_device;
+-		select_peripheral(PB(0),  PERIPH_B, 0);	/* MISO  */
+-		select_peripheral(PB(1),  PERIPH_B, 0);	/* MOSI  */
+-		select_peripheral(PB(5),  PERIPH_B, 0);	/* SCK   */
+-		at32_spi_setup_slaves(1, b, n, spi1_pins);
+-		break;
+-
+-	default:
+-		return NULL;
+-	}
+-
+-	spi_register_board_info(b, n);
+-	platform_device_register(pdev);
+-	return pdev;
+-}
+-
+-/* --------------------------------------------------------------------
+- *  TWI
+- * -------------------------------------------------------------------- */
+-static struct resource atmel_twi0_resource[] __initdata = {
+-	PBMEM(0xffe00800),
+-	IRQ(5),
+-};
+-static struct clk atmel_twi0_pclk = {
+-	.name		= "twi_pclk",
+-	.parent		= &pba_clk,
+-	.mode		= pba_clk_mode,
+-	.get_rate	= pba_clk_get_rate,
+-	.index		= 2,
+-};
+-
+-struct platform_device *__init at32_add_device_twi(unsigned int id)
+-{
+-	struct platform_device *pdev;
+-
+-	if (id != 0)
+-		return NULL;
+-
+-	pdev = platform_device_alloc("atmel_twi", id);
+-	if (!pdev)
+-		return NULL;
+-
+-	if (platform_device_add_resources(pdev, atmel_twi0_resource,
+-				ARRAY_SIZE(atmel_twi0_resource)))
+-		goto err_add_resources;
+-
+-	select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
+-	select_peripheral(PA(7),  PERIPH_A, 0);	/* SDL	*/
+-
+-	atmel_twi0_pclk.dev = &pdev->dev;
+-
+-	platform_device_add(pdev);
+-	return pdev;
+-
+-err_add_resources:
+-	platform_device_put(pdev);
+-	return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * MMC
+- * -------------------------------------------------------------------- */
+-static struct resource atmel_mci0_resource[] __initdata = {
+-	PBMEM(0xfff02400),
+-	IRQ(28),
+-};
+-static struct clk atmel_mci0_pclk = {
+-	.name		= "mci_clk",
+-	.parent		= &pbb_clk,
+-	.mode		= pbb_clk_mode,
+-	.get_rate	= pbb_clk_get_rate,
+-	.index		= 9,
+-};
+-
+-struct platform_device *__init at32_add_device_mci(unsigned int id)
+-{
+-	struct platform_device *pdev;
+-
+-	if (id != 0)
+-		return NULL;
+-
+-	pdev = platform_device_alloc("atmel_mci", id);
+-	if (!pdev)
+-		return NULL;
+-
+-	if (platform_device_add_resources(pdev, atmel_mci0_resource,
+-				ARRAY_SIZE(atmel_mci0_resource)))
+-		goto err_add_resources;
+-
+-	select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
+-	select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
+-	select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
+-	select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
+-	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
+-	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
+-
+-	atmel_mci0_pclk.dev = &pdev->dev;
+-
+-	platform_device_add(pdev);
+-	return pdev;
+-
+-err_add_resources:
+-	platform_device_put(pdev);
+-	return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- *  LCDC
+- * -------------------------------------------------------------------- */
+-static struct atmel_lcdfb_info atmel_lcdfb0_data;
+-static struct resource atmel_lcdfb0_resource[] = {
+-	{
+-		.start		= 0xff000000,
+-		.end		= 0xff000fff,
+-		.flags		= IORESOURCE_MEM,
+-	},
+-	IRQ(1),
+-	{
+-		/* Placeholder for pre-allocated fb memory */
+-		.start		= 0x00000000,
+-		.end		= 0x00000000,
+-		.flags		= 0,
+-	},
+-};
+-DEFINE_DEV_DATA(atmel_lcdfb, 0);
+-DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
+-static struct clk atmel_lcdfb0_pixclk = {
+-	.name		= "lcdc_clk",
+-	.dev		= &atmel_lcdfb0_device.dev,
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 7,
+-};
+-
+-struct platform_device *__init
+-at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+-		     unsigned long fbmem_start, unsigned long fbmem_len)
+-{
+-	struct platform_device *pdev;
+-	struct atmel_lcdfb_info *info;
+-	struct fb_monspecs *monspecs;
+-	struct fb_videomode *modedb;
+-	unsigned int modedb_size;
+-
+-	/*
+-	 * Do a deep copy of the fb data, monspecs and modedb. Make
+-	 * sure all allocations are done before setting up the
+-	 * portmux.
+-	 */
+-	monspecs = kmemdup(data->default_monspecs,
+-			   sizeof(struct fb_monspecs), GFP_KERNEL);
+-	if (!monspecs)
+-		return NULL;
+-
+-	modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
+-	modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
+-	if (!modedb)
+-		goto err_dup_modedb;
+-	monspecs->modedb = modedb;
+-
+-	switch (id) {
+-	case 0:
+-		pdev = &atmel_lcdfb0_device;
+-		select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
+-		select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
+-		select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
+-		select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
+-		select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
+-		select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
+-		select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
+-		select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
+-		select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
+-		select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
+-		select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
+-		select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
+-		select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
+-		select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
+-		select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
+-		select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
+-		select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
+-		select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
+-		select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
+-		select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
+-		select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
+-		select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
+-		select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
+-		select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
+-		select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
+-		select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
+-		select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
+-		select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
+-		select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
+-		select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
+-		select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
+-
+-		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
+-		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
+-		break;
+-
+-	default:
+-		goto err_invalid_id;
+-	}
+-
+-	if (fbmem_len) {
+-		pdev->resource[2].start = fbmem_start;
+-		pdev->resource[2].end = fbmem_start + fbmem_len - 1;
+-		pdev->resource[2].flags = IORESOURCE_MEM;
+-	}
+-
+-	info = pdev->dev.platform_data;
+-	memcpy(info, data, sizeof(struct atmel_lcdfb_info));
+-	info->default_monspecs = monspecs;
+-
+-	platform_device_register(pdev);
+-	return pdev;
+-
+-err_invalid_id:
+-	kfree(modedb);
+-err_dup_modedb:
+-	kfree(monspecs);
+-	return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- *  SSC
+- * -------------------------------------------------------------------- */
+-static struct resource ssc0_resource[] = {
+-	PBMEM(0xffe01c00),
+-	IRQ(10),
+-};
+-DEFINE_DEV(ssc, 0);
+-DEV_CLK(pclk, ssc0, pba, 7);
+-
+-static struct resource ssc1_resource[] = {
+-	PBMEM(0xffe02000),
+-	IRQ(11),
+-};
+-DEFINE_DEV(ssc, 1);
+-DEV_CLK(pclk, ssc1, pba, 8);
+-
+-static struct resource ssc2_resource[] = {
+-	PBMEM(0xffe02400),
+-	IRQ(12),
+-};
+-DEFINE_DEV(ssc, 2);
+-DEV_CLK(pclk, ssc2, pba, 9);
+-
+-struct platform_device *__init
+-at32_add_device_ssc(unsigned int id, unsigned int flags)
+-{
+-	struct platform_device *pdev;
+-
+-	switch (id) {
+-	case 0:
+-		pdev = &ssc0_device;
+-		if (flags & ATMEL_SSC_RF)
+-			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
+-		if (flags & ATMEL_SSC_RK)
+-			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
+-		if (flags & ATMEL_SSC_TK)
+-			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
+-		if (flags & ATMEL_SSC_TF)
+-			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
+-		if (flags & ATMEL_SSC_TD)
+-			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
+-		if (flags & ATMEL_SSC_RD)
+-			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
+-		break;
+-	case 1:
+-		pdev = &ssc1_device;
+-		if (flags & ATMEL_SSC_RF)
+-			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
+-		if (flags & ATMEL_SSC_RK)
+-			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
+-		if (flags & ATMEL_SSC_TK)
+-			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
+-		if (flags & ATMEL_SSC_TF)
+-			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
+-		if (flags & ATMEL_SSC_TD)
+-			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
+-		if (flags & ATMEL_SSC_RD)
+-			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
+-		break;
+-	case 2:
+-		pdev = &ssc2_device;
+-		if (flags & ATMEL_SSC_TD)
+-			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
+-		if (flags & ATMEL_SSC_RD)
+-			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
+-		if (flags & ATMEL_SSC_TK)
+-			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
+-		if (flags & ATMEL_SSC_TF)
+-			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
+-		if (flags & ATMEL_SSC_RF)
+-			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
+-		if (flags & ATMEL_SSC_RK)
+-			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
+-		break;
+-	default:
+-		return NULL;
+-	}
+-
+-	platform_device_register(pdev);
+-	return pdev;
+-}
+-
+-/* --------------------------------------------------------------------
+- *  USB Device Controller
+- * -------------------------------------------------------------------- */
+-static struct resource usba0_resource[] __initdata = {
+-	{
+-		.start		= 0xff300000,
+-		.end		= 0xff3fffff,
+-		.flags		= IORESOURCE_MEM,
+-	}, {
+-		.start		= 0xfff03000,
+-		.end		= 0xfff033ff,
+-		.flags		= IORESOURCE_MEM,
+-	},
+-	IRQ(31),
+-};
+-static struct clk usba0_pclk = {
+-	.name		= "pclk",
+-	.parent		= &pbb_clk,
+-	.mode		= pbb_clk_mode,
+-	.get_rate	= pbb_clk_get_rate,
+-	.index		= 12,
+-};
+-static struct clk usba0_hclk = {
+-	.name		= "hclk",
+-	.parent		= &hsb_clk,
+-	.mode		= hsb_clk_mode,
+-	.get_rate	= hsb_clk_get_rate,
+-	.index		= 6,
+-};
+-
+-struct platform_device *__init
+-at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
+-{
+-	struct platform_device *pdev;
+-
+-	if (id != 0)
+-		return NULL;
+-
+-	pdev = platform_device_alloc("atmel_usba_udc", 0);
+-	if (!pdev)
+-		return NULL;
+-
+-	if (platform_device_add_resources(pdev, usba0_resource,
+-					  ARRAY_SIZE(usba0_resource)))
+-		goto out_free_pdev;
+-
+-	if (data) {
+-		if (platform_device_add_data(pdev, data, sizeof(*data)))
+-			goto out_free_pdev;
+-
+-		if (data->vbus_pin != GPIO_PIN_NONE)
+-			at32_select_gpio(data->vbus_pin, 0);
+-	}
+-
+-	usba0_pclk.dev = &pdev->dev;
+-	usba0_hclk.dev = &pdev->dev;
+-
+-	platform_device_add(pdev);
+-
+-	return pdev;
+-
+-out_free_pdev:
+-	platform_device_put(pdev);
+-	return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * IDE / CompactFlash
+- * -------------------------------------------------------------------- */
+-static struct resource at32_smc_cs4_resource[] __initdata = {
+-	{
+-		.start	= 0x04000000,
+-		.end	= 0x07ffffff,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	IRQ(~0UL), /* Magic IRQ will be overridden */
+-};
+-static struct resource at32_smc_cs5_resource[] __initdata = {
+-	{
+-		.start	= 0x20000000,
+-		.end	= 0x23ffffff,
+-		.flags	= IORESOURCE_MEM,
+-	},
+-	IRQ(~0UL), /* Magic IRQ will be overridden */
+-};
+-
+-static int __init at32_init_ide_or_cf(struct platform_device *pdev,
+-		unsigned int cs, unsigned int extint)
+-{
+-	static unsigned int extint_pin_map[4] __initdata = {
+-		GPIO_PIN_PB(25),
+-		GPIO_PIN_PB(26),
+-		GPIO_PIN_PB(27),
+-		GPIO_PIN_PB(28),
+-	};
+-	static bool common_pins_initialized __initdata = false;
+-	unsigned int extint_pin;
+-	int ret;
+-
+-	if (extint >= ARRAY_SIZE(extint_pin_map))
+-		return -EINVAL;
+-	extint_pin = extint_pin_map[extint];
+-
+-	switch (cs) {
+-	case 4:
+-		ret = platform_device_add_resources(pdev,
+-				at32_smc_cs4_resource,
+-				ARRAY_SIZE(at32_smc_cs4_resource));
+-		if (ret)
+-			return ret;
+-
+-		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
+-		set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
+-		break;
+-	case 5:
+-		ret = platform_device_add_resources(pdev,
+-				at32_smc_cs5_resource,
+-				ARRAY_SIZE(at32_smc_cs5_resource));
+-		if (ret)
+-			return ret;
+-
+-		select_peripheral(PE(22), PERIPH_A, 0); /* NCS5   -> OE_N  */
+-		set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
+-		break;
+-	default:
+-		return -EINVAL;
+-	}
+-
+-	if (!common_pins_initialized) {
+-		select_peripheral(PE(19), PERIPH_A, 0);	/* CFCE1  -> CS0_N */
+-		select_peripheral(PE(20), PERIPH_A, 0);	/* CFCE2  -> CS1_N */
+-		select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW  -> DIR   */
+-		select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT  <- IORDY */
+-		common_pins_initialized = true;
+-	}
+-
+-	at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
+-
+-	pdev->resource[1].start = EIM_IRQ_BASE + extint;
+-	pdev->resource[1].end = pdev->resource[1].start;
+-
+-	return 0;
+-}
+-
+-struct platform_device *__init
+-at32_add_device_ide(unsigned int id, unsigned int extint,
+-		    struct ide_platform_data *data)
+-{
+-	struct platform_device *pdev;
+-
+-	pdev = platform_device_alloc("at32_ide", id);
+-	if (!pdev)
+-		goto fail;
+-
+-	if (platform_device_add_data(pdev, data,
+-				sizeof(struct ide_platform_data)))
+-		goto fail;
+-
+-	if (at32_init_ide_or_cf(pdev, data->cs, extint))
+-		goto fail;
+-
+-	platform_device_add(pdev);
+-	return pdev;
+-
+-fail:
+-	platform_device_put(pdev);
+-	return NULL;
+-}
+-
+-struct platform_device *__init
+-at32_add_device_cf(unsigned int id, unsigned int extint,
+-		    struct cf_platform_data *data)
+-{
+-	struct platform_device *pdev;
+-
+-	pdev = platform_device_alloc("at32_cf", id);
+-	if (!pdev)
+-		goto fail;
+-
+-	if (platform_device_add_data(pdev, data,
+-				sizeof(struct cf_platform_data)))
+-		goto fail;
+-
+-	if (at32_init_ide_or_cf(pdev, data->cs, extint))
+-		goto fail;
+-
+-	if (data->detect_pin != GPIO_PIN_NONE)
+-		at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
+-	if (data->reset_pin != GPIO_PIN_NONE)
+-		at32_select_gpio(data->reset_pin, 0);
+-	if (data->vcc_pin != GPIO_PIN_NONE)
+-		at32_select_gpio(data->vcc_pin, 0);
+-	/* READY is used as extint, so we can't select it as gpio */
+-
+-	platform_device_add(pdev);
+-	return pdev;
+-
+-fail:
+-	platform_device_put(pdev);
+-	return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * AC97C
+- * -------------------------------------------------------------------- */
+-static struct resource atmel_ac97c0_resource[] __initdata = {
+-	PBMEM(0xfff02800),
+-	IRQ(29),
+-};
+-static struct clk atmel_ac97c0_pclk = {
+-	.name		= "pclk",
+-	.parent		= &pbb_clk,
+-	.mode		= pbb_clk_mode,
+-	.get_rate	= pbb_clk_get_rate,
+-	.index		= 10,
+-};
+-
+-struct platform_device *__init at32_add_device_ac97c(unsigned int id)
+-{
+-	struct platform_device *pdev;
+-
+-	if (id != 0)
+-		return NULL;
+-
+-	pdev = platform_device_alloc("atmel_ac97c", id);
+-	if (!pdev)
+-		return NULL;
+-
+-	if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
+-				ARRAY_SIZE(atmel_ac97c0_resource)))
+-		goto err_add_resources;
+-
+-	select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
+-	select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
+-	select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
+-	select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
+-
+-	atmel_ac97c0_pclk.dev = &pdev->dev;
+-
+-	platform_device_add(pdev);
+-	return pdev;
+-
+-err_add_resources:
+-	platform_device_put(pdev);
+-	return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * ABDAC
+- * -------------------------------------------------------------------- */
+-static struct resource abdac0_resource[] __initdata = {
+-	PBMEM(0xfff02000),
+-	IRQ(27),
+-};
+-static struct clk abdac0_pclk = {
+-	.name		= "pclk",
+-	.parent		= &pbb_clk,
+-	.mode		= pbb_clk_mode,
+-	.get_rate	= pbb_clk_get_rate,
+-	.index		= 8,
+-};
+-static struct clk abdac0_sample_clk = {
+-	.name		= "sample_clk",
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 6,
+-};
+-
+-struct platform_device *__init at32_add_device_abdac(unsigned int id)
+-{
+-	struct platform_device *pdev;
+-
+-	if (id != 0)
+-		return NULL;
+-
+-	pdev = platform_device_alloc("abdac", id);
+-	if (!pdev)
+-		return NULL;
+-
+-	if (platform_device_add_resources(pdev, abdac0_resource,
+-				ARRAY_SIZE(abdac0_resource)))
+-		goto err_add_resources;
+-
+-	select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
+-	select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
+-	select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
+-	select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
+-
+-	abdac0_pclk.dev = &pdev->dev;
+-	abdac0_sample_clk.dev = &pdev->dev;
+-
+-	platform_device_add(pdev);
+-	return pdev;
+-
+-err_add_resources:
+-	platform_device_put(pdev);
+-	return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- *  GCLK
+- * -------------------------------------------------------------------- */
+-static struct clk gclk0 = {
+-	.name		= "gclk0",
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 0,
+-};
+-static struct clk gclk1 = {
+-	.name		= "gclk1",
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 1,
+-};
+-static struct clk gclk2 = {
+-	.name		= "gclk2",
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 2,
+-};
+-static struct clk gclk3 = {
+-	.name		= "gclk3",
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 3,
+-};
+-static struct clk gclk4 = {
+-	.name		= "gclk4",
+-	.mode		= genclk_mode,
+-	.get_rate	= genclk_get_rate,
+-	.set_rate	= genclk_set_rate,
+-	.set_parent	= genclk_set_parent,
+-	.index		= 4,
+-};
+-
+-struct clk *at32_clock_list[] = {
+-	&osc32k,
+-	&osc0,
+-	&osc1,
+-	&pll0,
+-	&pll1,
+-	&cpu_clk,
+-	&hsb_clk,
+-	&pba_clk,
+-	&pbb_clk,
+-	&at32_pm_pclk,
+-	&at32_intc0_pclk,
+-	&hmatrix_clk,
+-	&ebi_clk,
+-	&hramc_clk,
+-	&smc0_pclk,
+-	&smc0_mck,
+-	&pdc_hclk,
+-	&pdc_pclk,
+-	&dmaca0_hclk,
+-	&pico_clk,
+-	&pio0_mck,
+-	&pio1_mck,
+-	&pio2_mck,
+-	&pio3_mck,
+-	&pio4_mck,
+-	&at32_systc0_pclk,
+-	&atmel_usart0_usart,
+-	&atmel_usart1_usart,
+-	&atmel_usart2_usart,
+-	&atmel_usart3_usart,
+-	&macb0_hclk,
+-	&macb0_pclk,
+-	&macb1_hclk,
+-	&macb1_pclk,
+-	&atmel_spi0_spi_clk,
+-	&atmel_spi1_spi_clk,
+-	&atmel_twi0_pclk,
+-	&atmel_mci0_pclk,
+-	&atmel_lcdfb0_hck1,
+-	&atmel_lcdfb0_pixclk,
+-	&ssc0_pclk,
+-	&ssc1_pclk,
+-	&ssc2_pclk,
+-	&usba0_hclk,
+-	&usba0_pclk,
+-	&atmel_ac97c0_pclk,
+-	&abdac0_pclk,
+-	&abdac0_sample_clk,
+-	&gclk0,
+-	&gclk1,
+-	&gclk2,
+-	&gclk3,
+-	&gclk4,
+-};
+-unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
+-
+-void __init at32_portmux_init(void)
+-{
+-	at32_init_pio(&pio0_device);
+-	at32_init_pio(&pio1_device);
+-	at32_init_pio(&pio2_device);
+-	at32_init_pio(&pio3_device);
+-	at32_init_pio(&pio4_device);
+-}
+-
+-void __init at32_clock_init(void)
+-{
+-	u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
+-	int i;
+-
+-	if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
+-		main_clock = &pll0;
+-		cpu_clk.parent = &pll0;
+-	} else {
+-		main_clock = &osc0;
+-		cpu_clk.parent = &osc0;
+-	}
+-
+-	if (pm_readl(PLL0) & PM_BIT(PLLOSC))
+-		pll0.parent = &osc1;
+-	if (pm_readl(PLL1) & PM_BIT(PLLOSC))
+-		pll1.parent = &osc1;
+-
+-	genclk_init_parent(&gclk0);
+-	genclk_init_parent(&gclk1);
+-	genclk_init_parent(&gclk2);
+-	genclk_init_parent(&gclk3);
+-	genclk_init_parent(&gclk4);
+-	genclk_init_parent(&atmel_lcdfb0_pixclk);
+-	genclk_init_parent(&abdac0_sample_clk);
+-
+-	/*
+-	 * Turn on all clocks that have at least one user already, and
+-	 * turn off everything else. We only do this for module
+-	 * clocks, and even though it isn't particularly pretty to
+-	 * check the address of the mode function, it should do the
+-	 * trick...
+-	 */
+-	for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
+-		struct clk *clk = at32_clock_list[i];
+-
+-		if (clk->users == 0)
+-			continue;
+-
+-		if (clk->mode == &cpu_clk_mode)
+-			cpu_mask |= 1 << clk->index;
+-		else if (clk->mode == &hsb_clk_mode)
+-			hsb_mask |= 1 << clk->index;
+-		else if (clk->mode == &pba_clk_mode)
+-			pba_mask |= 1 << clk->index;
+-		else if (clk->mode == &pbb_clk_mode)
+-			pbb_mask |= 1 << clk->index;
+-	}
+-
+-	pm_writel(CPU_MASK, cpu_mask);
+-	pm_writel(HSB_MASK, hsb_mask);
+-	pm_writel(PBA_MASK, pba_mask);
+-	pm_writel(PBB_MASK, pbb_mask);
+-}
+diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/at32ap700x.c linux-avr32/arch/avr32/mach-at32ap/at32ap700x.c
+--- linux-2.6.24/arch/avr32/mach-at32ap/at32ap700x.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/mach-at32ap/at32ap700x.c	2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,1809 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
++#include <linux/spi/spi.h>
++
++#include <asm/io.h>
++#include <asm/irq.h>
++
++#include <asm/arch/at32ap700x.h>
++#include <asm/arch/board.h>
++#include <asm/arch/portmux.h>
++
++#include <video/atmel_lcdc.h>
++
++#include "clock.h"
++#include "hmatrix.h"
++#include "pio.h"
++#include "pm.h"
++
++
++#define PBMEM(base)					\
++	{						\
++		.start		= base,			\
++		.end		= base + 0x3ff,		\
++		.flags		= IORESOURCE_MEM,	\
++	}
++#define IRQ(num)					\
++	{						\
++		.start		= num,			\
++		.end		= num,			\
++		.flags		= IORESOURCE_IRQ,	\
++	}
++#define NAMED_IRQ(num, _name)				\
++	{						\
++		.start		= num,			\
++		.end		= num,			\
++		.name		= _name,		\
++		.flags		= IORESOURCE_IRQ,	\
++	}
++
++/* REVISIT these assume *every* device supports DMA, but several
++ * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
++ */
++#define DEFINE_DEV(_name, _id)					\
++static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
++static struct platform_device _name##_id##_device = {		\
++	.name		= #_name,				\
++	.id		= _id,					\
++	.dev		= {					\
++		.dma_mask = &_name##_id##_dma_mask,		\
++		.coherent_dma_mask = DMA_32BIT_MASK,		\
++	},							\
++	.resource	= _name##_id##_resource,		\
++	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
++}
++#define DEFINE_DEV_DATA(_name, _id)				\
++static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
++static struct platform_device _name##_id##_device = {		\
++	.name		= #_name,				\
++	.id		= _id,					\
++	.dev		= {					\
++		.dma_mask = &_name##_id##_dma_mask,		\
++		.platform_data	= &_name##_id##_data,		\
++		.coherent_dma_mask = DMA_32BIT_MASK,		\
++	},							\
++	.resource	= _name##_id##_resource,		\
++	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
++}
++
++#define select_peripheral(pin, periph, flags)			\
++	at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
++
++#define DEV_CLK(_name, devname, bus, _index)			\
++static struct clk devname##_##_name = {				\
++	.name		= #_name,				\
++	.dev		= &devname##_device.dev,		\
++	.parent		= &bus##_clk,				\
++	.mode		= bus##_clk_mode,			\
++	.get_rate	= bus##_clk_get_rate,			\
++	.index		= _index,				\
++}
++
++static DEFINE_SPINLOCK(pm_lock);
++
++unsigned long at32ap7000_osc_rates[3] = {
++	[0] = 32768,
++	/* FIXME: these are ATSTK1002-specific */
++	[1] = 20000000,
++	[2] = 12000000,
++};
++
++static unsigned long osc_get_rate(struct clk *clk)
++{
++	return at32ap7000_osc_rates[clk->index];
++}
++
++static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
++{
++	unsigned long div, mul, rate;
++
++	if (!(control & PM_BIT(PLLEN)))
++		return 0;
++
++	div = PM_BFEXT(PLLDIV, control) + 1;
++	mul = PM_BFEXT(PLLMUL, control) + 1;
++
++	rate = clk->parent->get_rate(clk->parent);
++	rate = (rate + div / 2) / div;
++	rate *= mul;
++
++	return rate;
++}
++
++static unsigned long pll0_get_rate(struct clk *clk)
++{
++	u32 control;
++
++	control = pm_readl(PLL0);
++
++	return pll_get_rate(clk, control);
++}
++
++static unsigned long pll1_get_rate(struct clk *clk)
++{
++	u32 control;
++
++	control = pm_readl(PLL1);
++
++	return pll_get_rate(clk, control);
++}
++
++/*
++ * The AT32AP7000 has five primary clock sources: One 32kHz
++ * oscillator, two crystal oscillators and two PLLs.
++ */
++static struct clk osc32k = {
++	.name		= "osc32k",
++	.get_rate	= osc_get_rate,
++	.users		= 1,
++	.index		= 0,
++};
++static struct clk osc0 = {
++	.name		= "osc0",
++	.get_rate	= osc_get_rate,
++	.users		= 1,
++	.index		= 1,
++};
++static struct clk osc1 = {
++	.name		= "osc1",
++	.get_rate	= osc_get_rate,
++	.index		= 2,
++};
++static struct clk pll0 = {
++	.name		= "pll0",
++	.get_rate	= pll0_get_rate,
++	.parent		= &osc0,
++};
++static struct clk pll1 = {
++	.name		= "pll1",
++	.get_rate	= pll1_get_rate,
++	.parent		= &osc0,
++};
++
++/*
++ * The main clock can be either osc0 or pll0.  The boot loader may
++ * have chosen one for us, so we don't really know which one until we
++ * have a look at the SM.
++ */
++static struct clk *main_clock;
++
++/*
++ * Synchronous clocks are generated from the main clock. The clocks
++ * must satisfy the constraint
++ *   fCPU >= fHSB >= fPB
++ * i.e. each clock must not be faster than its parent.
++ */
++static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
++{
++	return main_clock->get_rate(main_clock) >> shift;
++};
++
++static void cpu_clk_mode(struct clk *clk, int enabled)
++{
++	unsigned long flags;
++	u32 mask;
++
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(CPU_MASK);
++	if (enabled)
++		mask |= 1 << clk->index;
++	else
++		mask &= ~(1 << clk->index);
++	pm_writel(CPU_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long cpu_clk_get_rate(struct clk *clk)
++{
++	unsigned long cksel, shift = 0;
++
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(CPUDIV))
++		shift = PM_BFEXT(CPUSEL, cksel) + 1;
++
++	return bus_clk_get_rate(clk, shift);
++}
++
++static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
++{
++	u32 control;
++	unsigned long parent_rate, child_div, actual_rate, div;
++
++	parent_rate = clk->parent->get_rate(clk->parent);
++	control = pm_readl(CKSEL);
++
++	if (control & PM_BIT(HSBDIV))
++		child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
++	else
++		child_div = 1;
++
++	if (rate > 3 * (parent_rate / 4) || child_div == 1) {
++		actual_rate = parent_rate;
++		control &= ~PM_BIT(CPUDIV);
++	} else {
++		unsigned int cpusel;
++		div = (parent_rate + rate / 2) / rate;
++		if (div > child_div)
++			div = child_div;
++		cpusel = (div > 1) ? (fls(div) - 2) : 0;
++		control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
++		actual_rate = parent_rate / (1 << (cpusel + 1));
++	}
++
++	pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
++			clk->name, rate, actual_rate);
++
++	if (apply)
++		pm_writel(CKSEL, control);
++
++	return actual_rate;
++}
++
++static void hsb_clk_mode(struct clk *clk, int enabled)
++{
++	unsigned long flags;
++	u32 mask;
++
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(HSB_MASK);
++	if (enabled)
++		mask |= 1 << clk->index;
++	else
++		mask &= ~(1 << clk->index);
++	pm_writel(HSB_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long hsb_clk_get_rate(struct clk *clk)
++{
++	unsigned long cksel, shift = 0;
++
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(HSBDIV))
++		shift = PM_BFEXT(HSBSEL, cksel) + 1;
++
++	return bus_clk_get_rate(clk, shift);
++}
++
++static void pba_clk_mode(struct clk *clk, int enabled)
++{
++	unsigned long flags;
++	u32 mask;
++
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(PBA_MASK);
++	if (enabled)
++		mask |= 1 << clk->index;
++	else
++		mask &= ~(1 << clk->index);
++	pm_writel(PBA_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long pba_clk_get_rate(struct clk *clk)
++{
++	unsigned long cksel, shift = 0;
++
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(PBADIV))
++		shift = PM_BFEXT(PBASEL, cksel) + 1;
++
++	return bus_clk_get_rate(clk, shift);
++}
++
++static void pbb_clk_mode(struct clk *clk, int enabled)
++{
++	unsigned long flags;
++	u32 mask;
++
++	spin_lock_irqsave(&pm_lock, flags);
++	mask = pm_readl(PBB_MASK);
++	if (enabled)
++		mask |= 1 << clk->index;
++	else
++		mask &= ~(1 << clk->index);
++	pm_writel(PBB_MASK, mask);
++	spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long pbb_clk_get_rate(struct clk *clk)
++{
++	unsigned long cksel, shift = 0;
++
++	cksel = pm_readl(CKSEL);
++	if (cksel & PM_BIT(PBBDIV))
++		shift = PM_BFEXT(PBBSEL, cksel) + 1;
++
++	return bus_clk_get_rate(clk, shift);
++}
++
++static struct clk cpu_clk = {
++	.name		= "cpu",
++	.get_rate	= cpu_clk_get_rate,
++	.set_rate	= cpu_clk_set_rate,
++	.users		= 1,
++};
++static struct clk hsb_clk = {
++	.name		= "hsb",
++	.parent		= &cpu_clk,
++	.get_rate	= hsb_clk_get_rate,
++};
++static struct clk pba_clk = {
++	.name		= "pba",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= pba_clk_get_rate,
++	.index		= 1,
++};
++static struct clk pbb_clk = {
++	.name		= "pbb",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.users		= 1,
++	.index		= 2,
++};
++
++/* --------------------------------------------------------------------
++ *  Generic Clock operations
++ * -------------------------------------------------------------------- */
++
++static void genclk_mode(struct clk *clk, int enabled)
++{
++	u32 control;
++
++	control = pm_readl(GCCTRL(clk->index));
++	if (enabled)
++		control |= PM_BIT(CEN);
++	else
++		control &= ~PM_BIT(CEN);
++	pm_writel(GCCTRL(clk->index), control);
++}
++
++static unsigned long genclk_get_rate(struct clk *clk)
++{
++	u32 control;
++	unsigned long div = 1;
++
++	control = pm_readl(GCCTRL(clk->index));
++	if (control & PM_BIT(DIVEN))
++		div = 2 * (PM_BFEXT(DIV, control) + 1);
++
++	return clk->parent->get_rate(clk->parent) / div;
++}
++
++static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
++{
++	u32 control;
++	unsigned long parent_rate, actual_rate, div;
++
++	parent_rate = clk->parent->get_rate(clk->parent);
++	control = pm_readl(GCCTRL(clk->index));
++
++	if (rate > 3 * parent_rate / 4) {
++		actual_rate = parent_rate;
++		control &= ~PM_BIT(DIVEN);
++	} else {
++		div = (parent_rate + rate) / (2 * rate) - 1;
++		control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
++		actual_rate = parent_rate / (2 * (div + 1));
++	}
++
++	dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
++		clk->name, rate, actual_rate);
++
++	if (apply)
++		pm_writel(GCCTRL(clk->index), control);
++
++	return actual_rate;
++}
++
++int genclk_set_parent(struct clk *clk, struct clk *parent)
++{
++	u32 control;
++
++	dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
++		clk->name, parent->name, clk->parent->name);
++
++	control = pm_readl(GCCTRL(clk->index));
++
++	if (parent == &osc1 || parent == &pll1)
++		control |= PM_BIT(OSCSEL);
++	else if (parent == &osc0 || parent == &pll0)
++		control &= ~PM_BIT(OSCSEL);
++	else
++		return -EINVAL;
++
++	if (parent == &pll0 || parent == &pll1)
++		control |= PM_BIT(PLLSEL);
++	else
++		control &= ~PM_BIT(PLLSEL);
++
++	pm_writel(GCCTRL(clk->index), control);
++	clk->parent = parent;
++
++	return 0;
++}
++
++static void __init genclk_init_parent(struct clk *clk)
++{
++	u32 control;
++	struct clk *parent;
++
++	BUG_ON(clk->index > 7);
++
++	control = pm_readl(GCCTRL(clk->index));
++	if (control & PM_BIT(OSCSEL))
++		parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
++	else
++		parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
++
++	clk->parent = parent;
++}
++
++/* --------------------------------------------------------------------
++ *  System peripherals
++ * -------------------------------------------------------------------- */
++static struct resource at32_pm0_resource[] = {
++	{
++		.start	= 0xfff00000,
++		.end	= 0xfff0007f,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(20),
++};
++
++static struct resource at32ap700x_rtc0_resource[] = {
++	{
++		.start	= 0xfff00080,
++		.end	= 0xfff000af,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(21),
++};
++
++static struct resource at32_wdt0_resource[] = {
++	{
++		.start	= 0xfff000b0,
++		.end	= 0xfff000cf,
++		.flags	= IORESOURCE_MEM,
++	},
++};
++
++static struct resource at32_eic0_resource[] = {
++	{
++		.start	= 0xfff00100,
++		.end	= 0xfff0013f,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(19),
++};
++
++DEFINE_DEV(at32_pm, 0);
++DEFINE_DEV(at32ap700x_rtc, 0);
++DEFINE_DEV(at32_wdt, 0);
++DEFINE_DEV(at32_eic, 0);
++
++/*
++ * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
++ * is always running.
++ */
++static struct clk at32_pm_pclk = {
++	.name		= "pclk",
++	.dev		= &at32_pm0_device.dev,
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.users		= 1,
++	.index		= 0,
++};
++
++static struct resource intc0_resource[] = {
++	PBMEM(0xfff00400),
++};
++struct platform_device at32_intc0_device = {
++	.name		= "intc",
++	.id		= 0,
++	.resource	= intc0_resource,
++	.num_resources	= ARRAY_SIZE(intc0_resource),
++};
++DEV_CLK(pclk, at32_intc0, pbb, 1);
++
++static struct clk ebi_clk = {
++	.name		= "ebi",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= hsb_clk_get_rate,
++	.users		= 1,
++};
++static struct clk hramc_clk = {
++	.name		= "hramc",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= hsb_clk_get_rate,
++	.users		= 1,
++	.index		= 3,
++};
++
++static struct resource smc0_resource[] = {
++	PBMEM(0xfff03400),
++};
++DEFINE_DEV(smc, 0);
++DEV_CLK(pclk, smc0, pbb, 13);
++DEV_CLK(mck, smc0, hsb, 0);
++
++static struct platform_device pdc_device = {
++	.name		= "pdc",
++	.id		= 0,
++};
++DEV_CLK(hclk, pdc, hsb, 4);
++DEV_CLK(pclk, pdc, pba, 16);
++
++static struct clk pico_clk = {
++	.name		= "pico",
++	.parent		= &cpu_clk,
++	.mode		= cpu_clk_mode,
++	.get_rate	= cpu_clk_get_rate,
++	.users		= 1,
++};
++
++static struct resource dmaca0_resource[] = {
++	{
++		.start	= 0xff200000,
++		.end	= 0xff20ffff,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(2),
++};
++DEFINE_DEV(dmaca, 0);
++DEV_CLK(hclk, dmaca0, hsb, 10);
++
++/* --------------------------------------------------------------------
++ * HMATRIX
++ * -------------------------------------------------------------------- */
++
++static struct clk hmatrix_clk = {
++	.name		= "hmatrix_clk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 2,
++	.users		= 1,
++};
++#define HMATRIX_BASE	((void __iomem *)0xfff00800)
++
++#define hmatrix_readl(reg)					\
++	__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
++#define hmatrix_writel(reg,value)				\
++	__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
++
++/*
++ * Set bits in the HMATRIX Special Function Register (SFR) used by the
++ * External Bus Interface (EBI). This can be used to enable special
++ * features like CompactFlash support, NAND Flash support, etc. on
++ * certain chipselects.
++ */
++static inline void set_ebi_sfr_bits(u32 mask)
++{
++	u32 sfr;
++
++	clk_enable(&hmatrix_clk);
++	sfr = hmatrix_readl(SFR4);
++	sfr |= mask;
++	hmatrix_writel(SFR4, sfr);
++	clk_disable(&hmatrix_clk);
++}
++
++/* --------------------------------------------------------------------
++ *  System Timer/Counter (TC)
++ * -------------------------------------------------------------------- */
++static struct resource at32_systc0_resource[] = {
++	PBMEM(0xfff00c00),
++	IRQ(22),
++};
++struct platform_device at32_systc0_device = {
++	.name		= "systc",
++	.id		= 0,
++	.resource	= at32_systc0_resource,
++	.num_resources	= ARRAY_SIZE(at32_systc0_resource),
++};
++DEV_CLK(pclk, at32_systc0, pbb, 3);
++
++/* --------------------------------------------------------------------
++ *  PIO
++ * -------------------------------------------------------------------- */
++
++static struct resource pio0_resource[] = {
++	PBMEM(0xffe02800),
++	IRQ(13),
++};
++DEFINE_DEV(pio, 0);
++DEV_CLK(mck, pio0, pba, 10);
++
++static struct resource pio1_resource[] = {
++	PBMEM(0xffe02c00),
++	IRQ(14),
++};
++DEFINE_DEV(pio, 1);
++DEV_CLK(mck, pio1, pba, 11);
++
++static struct resource pio2_resource[] = {
++	PBMEM(0xffe03000),
++	IRQ(15),
++};
++DEFINE_DEV(pio, 2);
++DEV_CLK(mck, pio2, pba, 12);
++
++static struct resource pio3_resource[] = {
++	PBMEM(0xffe03400),
++	IRQ(16),
++};
++DEFINE_DEV(pio, 3);
++DEV_CLK(mck, pio3, pba, 13);
++
++static struct resource pio4_resource[] = {
++	PBMEM(0xffe03800),
++	IRQ(17),
++};
++DEFINE_DEV(pio, 4);
++DEV_CLK(mck, pio4, pba, 14);
++
++void __init at32_add_system_devices(void)
++{
++	platform_device_register(&at32_pm0_device);
++	platform_device_register(&at32_intc0_device);
++	platform_device_register(&at32ap700x_rtc0_device);
++	platform_device_register(&at32_wdt0_device);
++	platform_device_register(&at32_eic0_device);
++	platform_device_register(&smc0_device);
++	platform_device_register(&pdc_device);
++	platform_device_register(&dmaca0_device);
++
++	platform_device_register(&at32_systc0_device);
++
++	platform_device_register(&pio0_device);
++	platform_device_register(&pio1_device);
++	platform_device_register(&pio2_device);
++	platform_device_register(&pio3_device);
++	platform_device_register(&pio4_device);
++}
++
++/* --------------------------------------------------------------------
++ *  USART
++ * -------------------------------------------------------------------- */
++
++static struct atmel_uart_data atmel_usart0_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++static struct resource atmel_usart0_resource[] = {
++	PBMEM(0xffe00c00),
++	IRQ(6),
++};
++DEFINE_DEV_DATA(atmel_usart, 0);
++DEV_CLK(usart, atmel_usart0, pba, 3);
++
++static struct atmel_uart_data atmel_usart1_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++static struct resource atmel_usart1_resource[] = {
++	PBMEM(0xffe01000),
++	IRQ(7),
++};
++DEFINE_DEV_DATA(atmel_usart, 1);
++DEV_CLK(usart, atmel_usart1, pba, 4);
++
++static struct atmel_uart_data atmel_usart2_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++static struct resource atmel_usart2_resource[] = {
++	PBMEM(0xffe01400),
++	IRQ(8),
++};
++DEFINE_DEV_DATA(atmel_usart, 2);
++DEV_CLK(usart, atmel_usart2, pba, 5);
++
++static struct atmel_uart_data atmel_usart3_data = {
++	.use_dma_tx	= 1,
++	.use_dma_rx	= 1,
++};
++static struct resource atmel_usart3_resource[] = {
++	PBMEM(0xffe01800),
++	IRQ(9),
++};
++DEFINE_DEV_DATA(atmel_usart, 3);
++DEV_CLK(usart, atmel_usart3, pba, 6);
++
++static inline void configure_usart0_pins(void)
++{
++	select_peripheral(PA(8),  PERIPH_B, 0);	/* RXD	*/
++	select_peripheral(PA(9),  PERIPH_B, 0);	/* TXD	*/
++}
++
++static inline void configure_usart1_pins(void)
++{
++	select_peripheral(PA(17), PERIPH_A, 0);	/* RXD	*/
++	select_peripheral(PA(18), PERIPH_A, 0);	/* TXD	*/
++}
++
++static inline void configure_usart2_pins(void)
++{
++	select_peripheral(PB(26), PERIPH_B, 0);	/* RXD	*/
++	select_peripheral(PB(27), PERIPH_B, 0);	/* TXD	*/
++}
++
++static inline void configure_usart3_pins(void)
++{
++	select_peripheral(PB(18), PERIPH_B, 0);	/* RXD	*/
++	select_peripheral(PB(17), PERIPH_B, 0);	/* TXD	*/
++}
++
++static struct platform_device *__initdata at32_usarts[4];
++
++void __init at32_map_usart(unsigned int hw_id, unsigned int line)
++{
++	struct platform_device *pdev;
++
++	switch (hw_id) {
++	case 0:
++		pdev = &atmel_usart0_device;
++		configure_usart0_pins();
++		break;
++	case 1:
++		pdev = &atmel_usart1_device;
++		configure_usart1_pins();
++		break;
++	case 2:
++		pdev = &atmel_usart2_device;
++		configure_usart2_pins();
++		break;
++	case 3:
++		pdev = &atmel_usart3_device;
++		configure_usart3_pins();
++		break;
++	default:
++		return;
++	}
++
++	if (PXSEG(pdev->resource[0].start) == P4SEG) {
++		/* Addresses in the P4 segment are permanently mapped 1:1 */
++		struct atmel_uart_data *data = pdev->dev.platform_data;
++		data->regs = (void __iomem *)pdev->resource[0].start;
++	}
++
++	pdev->id = line;
++	at32_usarts[line] = pdev;
++}
++
++struct platform_device *__init at32_add_device_usart(unsigned int id)
++{
++	platform_device_register(at32_usarts[id]);
++	return at32_usarts[id];
++}
++
++struct platform_device *atmel_default_console_device;
++
++void __init at32_setup_serial_console(unsigned int usart_id)
++{
++	atmel_default_console_device = at32_usarts[usart_id];
++}
++
++/* --------------------------------------------------------------------
++ *  Ethernet
++ * -------------------------------------------------------------------- */
++
++#ifdef CONFIG_CPU_AT32AP7000
++static struct eth_platform_data macb0_data;
++static struct resource macb0_resource[] = {
++	PBMEM(0xfff01800),
++	IRQ(25),
++};
++DEFINE_DEV_DATA(macb, 0);
++DEV_CLK(hclk, macb0, hsb, 8);
++DEV_CLK(pclk, macb0, pbb, 6);
++
++static struct eth_platform_data macb1_data;
++static struct resource macb1_resource[] = {
++	PBMEM(0xfff01c00),
++	IRQ(26),
++};
++DEFINE_DEV_DATA(macb, 1);
++DEV_CLK(hclk, macb1, hsb, 9);
++DEV_CLK(pclk, macb1, pbb, 7);
++
++struct platform_device *__init
++at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
++{
++	struct platform_device *pdev;
++
++	switch (id) {
++	case 0:
++		pdev = &macb0_device;
++
++		select_peripheral(PC(3),  PERIPH_A, 0);	/* TXD0	*/
++		select_peripheral(PC(4),  PERIPH_A, 0);	/* TXD1	*/
++		select_peripheral(PC(7),  PERIPH_A, 0);	/* TXEN	*/
++		select_peripheral(PC(8),  PERIPH_A, 0);	/* TXCK */
++		select_peripheral(PC(9),  PERIPH_A, 0);	/* RXD0	*/
++		select_peripheral(PC(10), PERIPH_A, 0);	/* RXD1	*/
++		select_peripheral(PC(13), PERIPH_A, 0);	/* RXER	*/
++		select_peripheral(PC(15), PERIPH_A, 0);	/* RXDV	*/
++		select_peripheral(PC(16), PERIPH_A, 0);	/* MDC	*/
++		select_peripheral(PC(17), PERIPH_A, 0);	/* MDIO	*/
++
++		if (!data->is_rmii) {
++			select_peripheral(PC(0),  PERIPH_A, 0);	/* COL	*/
++			select_peripheral(PC(1),  PERIPH_A, 0);	/* CRS	*/
++			select_peripheral(PC(2),  PERIPH_A, 0);	/* TXER	*/
++			select_peripheral(PC(5),  PERIPH_A, 0);	/* TXD2	*/
++			select_peripheral(PC(6),  PERIPH_A, 0);	/* TXD3 */
++			select_peripheral(PC(11), PERIPH_A, 0);	/* RXD2	*/
++			select_peripheral(PC(12), PERIPH_A, 0);	/* RXD3	*/
++			select_peripheral(PC(14), PERIPH_A, 0);	/* RXCK	*/
++			select_peripheral(PC(18), PERIPH_A, 0);	/* SPD	*/
++		}
++		break;
++
++	case 1:
++		pdev = &macb1_device;
++
++		select_peripheral(PD(13), PERIPH_B, 0);		/* TXD0	*/
++		select_peripheral(PD(14), PERIPH_B, 0);		/* TXD1	*/
++		select_peripheral(PD(11), PERIPH_B, 0);		/* TXEN	*/
++		select_peripheral(PD(12), PERIPH_B, 0);		/* TXCK */
++		select_peripheral(PD(10), PERIPH_B, 0);		/* RXD0	*/
++		select_peripheral(PD(6),  PERIPH_B, 0);		/* RXD1	*/
++		select_peripheral(PD(5),  PERIPH_B, 0);		/* RXER	*/
++		select_peripheral(PD(4),  PERIPH_B, 0);		/* RXDV	*/
++		select_peripheral(PD(3),  PERIPH_B, 0);		/* MDC	*/
++		select_peripheral(PD(2),  PERIPH_B, 0);		/* MDIO	*/
++
++		if (!data->is_rmii) {
++			select_peripheral(PC(19), PERIPH_B, 0);	/* COL	*/
++			select_peripheral(PC(23), PERIPH_B, 0);	/* CRS	*/
++			select_peripheral(PC(26), PERIPH_B, 0);	/* TXER	*/
++			select_peripheral(PC(27), PERIPH_B, 0);	/* TXD2	*/
++			select_peripheral(PC(28), PERIPH_B, 0);	/* TXD3 */
++			select_peripheral(PC(29), PERIPH_B, 0);	/* RXD2	*/
++			select_peripheral(PC(30), PERIPH_B, 0);	/* RXD3	*/
++			select_peripheral(PC(24), PERIPH_B, 0);	/* RXCK	*/
++			select_peripheral(PD(15), PERIPH_B, 0);	/* SPD	*/
++		}
++		break;
++
++	default:
++		return NULL;
++	}
++
++	memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
++	platform_device_register(pdev);
++
++	return pdev;
++}
++#endif
++
++/* --------------------------------------------------------------------
++ *  SPI
++ * -------------------------------------------------------------------- */
++static struct resource atmel_spi0_resource[] = {
++	PBMEM(0xffe00000),
++	IRQ(3),
++};
++DEFINE_DEV(atmel_spi, 0);
++DEV_CLK(spi_clk, atmel_spi0, pba, 0);
++
++static struct resource atmel_spi1_resource[] = {
++	PBMEM(0xffe00400),
++	IRQ(4),
++};
++DEFINE_DEV(atmel_spi, 1);
++DEV_CLK(spi_clk, atmel_spi1, pba, 1);
++
++static void __init
++at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
++		      unsigned int n, const u8 *pins)
++{
++	unsigned int pin, mode;
++
++	for (; n; n--, b++) {
++		b->bus_num = bus_num;
++		if (b->chip_select >= 4)
++			continue;
++		pin = (unsigned)b->controller_data;
++		if (!pin) {
++			pin = pins[b->chip_select];
++			b->controller_data = (void *)pin;
++		}
++		mode = AT32_GPIOF_OUTPUT;
++		if (!(b->mode & SPI_CS_HIGH))
++			mode |= AT32_GPIOF_HIGH;
++		at32_select_gpio(pin, mode);
++	}
++}
++
++struct platform_device *__init
++at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
++{
++	/*
++	 * Manage the chipselects as GPIOs, normally using the same pins
++	 * the SPI controller expects; but boards can use other pins.
++	 */
++	static u8 __initdata spi0_pins[] =
++		{ GPIO_PIN_PA(3), GPIO_PIN_PA(4),
++		  GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
++	static u8 __initdata spi1_pins[] =
++		{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
++		  GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
++	struct platform_device *pdev;
++
++	switch (id) {
++	case 0:
++		pdev = &atmel_spi0_device;
++		select_peripheral(PA(0),  PERIPH_A, 0);	/* MISO	 */
++		select_peripheral(PA(1),  PERIPH_A, 0);	/* MOSI	 */
++		select_peripheral(PA(2),  PERIPH_A, 0);	/* SCK	 */
++		at32_spi_setup_slaves(0, b, n, spi0_pins);
++		break;
++
++	case 1:
++		pdev = &atmel_spi1_device;
++		select_peripheral(PB(0),  PERIPH_B, 0);	/* MISO  */
++		select_peripheral(PB(1),  PERIPH_B, 0);	/* MOSI  */
++		select_peripheral(PB(5),  PERIPH_B, 0);	/* SCK   */
++		at32_spi_setup_slaves(1, b, n, spi1_pins);
++		break;
++
++	default:
++		return NULL;
++	}
++
++	spi_register_board_info(b, n);
++	platform_device_register(pdev);
++	return pdev;
++}
++
++/* --------------------------------------------------------------------
++ *  TWI
++ * -------------------------------------------------------------------- */
++static struct resource atmel_twi0_resource[] __initdata = {
++	PBMEM(0xffe00800),
++	IRQ(5),
++};
++static struct clk atmel_twi0_pclk = {
++	.name		= "twi_pclk",
++	.parent		= &pba_clk,
++	.mode		= pba_clk_mode,
++	.get_rate	= pba_clk_get_rate,
++	.index		= 2,
++};
++
++struct platform_device *__init at32_add_device_twi(unsigned int id)
++{
++	struct platform_device *pdev;
++
++	if (id != 0)
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_twi", id);
++	if (!pdev)
++		return NULL;
++
++	if (platform_device_add_resources(pdev, atmel_twi0_resource,
++				ARRAY_SIZE(atmel_twi0_resource)))
++		goto err_add_resources;
++
++	select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
++	select_peripheral(PA(7),  PERIPH_A, 0);	/* SDL	*/
++
++	atmel_twi0_pclk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++	return pdev;
++
++err_add_resources:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * MMC
++ * -------------------------------------------------------------------- */
++static struct resource atmel_mci0_resource[] __initdata = {
++	PBMEM(0xfff02400),
++	IRQ(28),
++};
++static struct clk atmel_mci0_pclk = {
++	.name		= "mci_clk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 9,
++};
++
++struct platform_device *__init
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
++{
++	struct platform_device *pdev;
++
++	if (id != 0)
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_mci", id);
++	if (!pdev)
++		goto fail;
++
++	if (platform_device_add_resources(pdev, atmel_mci0_resource,
++				ARRAY_SIZE(atmel_mci0_resource)))
++		goto fail;
++
++	if (data && platform_device_add_data(pdev, data,
++				sizeof(struct mci_platform_data)))
++		goto fail;
++
++	select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
++	select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
++	select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
++	select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
++	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
++	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
++
++	if (data) {
++		if (data->detect_pin != GPIO_PIN_NONE)
++			at32_select_gpio(data->detect_pin, 0);
++		if (data->wp_pin != GPIO_PIN_NONE)
++			at32_select_gpio(data->wp_pin, 0);
++	}
++
++	atmel_mci0_pclk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++	return pdev;
++
++fail:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ *  LCDC
++ * -------------------------------------------------------------------- */
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
++static struct atmel_lcdfb_info atmel_lcdfb0_data;
++static struct resource atmel_lcdfb0_resource[] = {
++	{
++		.start		= 0xff000000,
++		.end		= 0xff000fff,
++		.flags		= IORESOURCE_MEM,
++	},
++	IRQ(1),
++	{
++		/* Placeholder for pre-allocated fb memory */
++		.start		= 0x00000000,
++		.end		= 0x00000000,
++		.flags		= 0,
++	},
++};
++DEFINE_DEV_DATA(atmel_lcdfb, 0);
++DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
++static struct clk atmel_lcdfb0_pixclk = {
++	.name		= "lcdc_clk",
++	.dev		= &atmel_lcdfb0_device.dev,
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 7,
++};
++
++struct platform_device *__init
++at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
++		     unsigned long fbmem_start, unsigned long fbmem_len)
++{
++	struct platform_device *pdev;
++	struct atmel_lcdfb_info *info;
++	struct fb_monspecs *monspecs;
++	struct fb_videomode *modedb;
++	unsigned int modedb_size;
++
++	/*
++	 * Do a deep copy of the fb data, monspecs and modedb. Make
++	 * sure all allocations are done before setting up the
++	 * portmux.
++	 */
++	monspecs = kmemdup(data->default_monspecs,
++			   sizeof(struct fb_monspecs), GFP_KERNEL);
++	if (!monspecs)
++		return NULL;
++
++	modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
++	modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
++	if (!modedb)
++		goto err_dup_modedb;
++	monspecs->modedb = modedb;
++
++	switch (id) {
++	case 0:
++		pdev = &atmel_lcdfb0_device;
++		select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
++		select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
++		select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
++		select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
++		select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
++		select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
++		select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
++		select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
++		select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
++		select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
++		select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
++		select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
++		select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
++		select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
++		select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
++		select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
++		select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
++		select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
++		select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
++		select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
++		select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
++		select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
++		select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
++		select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
++		select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
++		select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
++		select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
++		select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
++		select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
++		select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
++		select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
++
++		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
++		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
++		break;
++
++	default:
++		goto err_invalid_id;
++	}
++
++	if (fbmem_len) {
++		pdev->resource[2].start = fbmem_start;
++		pdev->resource[2].end = fbmem_start + fbmem_len - 1;
++		pdev->resource[2].flags = IORESOURCE_MEM;
++	}
++
++	info = pdev->dev.platform_data;
++	memcpy(info, data, sizeof(struct atmel_lcdfb_info));
++	info->default_monspecs = monspecs;
++
++	platform_device_register(pdev);
++	return pdev;
++
++err_invalid_id:
++	kfree(modedb);
++err_dup_modedb:
++	kfree(monspecs);
++	return NULL;
++}
++#endif
++
++/* --------------------------------------------------------------------
++ *  PWM
++ * -------------------------------------------------------------------- */
++static struct resource atmel_pwm0_resource[] __initdata = {
++	PBMEM(0xfff01400),
++	IRQ(24),
++};
++static struct clk atmel_pwm0_mck = {
++	.name		= "mck",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 5,
++};
++
++struct platform_device *__init at32_add_device_pwm(u32 mask)
++{
++	struct platform_device *pdev;
++
++	if (!mask)
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_pwm", 0);
++	if (!pdev)
++		return NULL;
++
++	if (platform_device_add_resources(pdev, atmel_pwm0_resource,
++				ARRAY_SIZE(atmel_pwm0_resource)))
++		goto out_free_pdev;
++
++	if (platform_device_add_data(pdev, &mask, sizeof(mask)))
++		goto out_free_pdev;
++
++	if (mask & (1 << 0))
++		select_peripheral(PA(28), PERIPH_A, 0);
++	if (mask & (1 << 1))
++		select_peripheral(PA(29), PERIPH_A, 0);
++	if (mask & (1 << 2))
++		select_peripheral(PA(21), PERIPH_B, 0);
++	if (mask & (1 << 3))
++		select_peripheral(PA(22), PERIPH_B, 0);
++
++	atmel_pwm0_mck.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++
++	return pdev;
++
++out_free_pdev:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ *  SSC
++ * -------------------------------------------------------------------- */
++static struct resource ssc0_resource[] = {
++	PBMEM(0xffe01c00),
++	IRQ(10),
++};
++DEFINE_DEV(ssc, 0);
++DEV_CLK(pclk, ssc0, pba, 7);
++
++static struct resource ssc1_resource[] = {
++	PBMEM(0xffe02000),
++	IRQ(11),
++};
++DEFINE_DEV(ssc, 1);
++DEV_CLK(pclk, ssc1, pba, 8);
++
++static struct resource ssc2_resource[] = {
++	PBMEM(0xffe02400),
++	IRQ(12),
++};
++DEFINE_DEV(ssc, 2);
++DEV_CLK(pclk, ssc2, pba, 9);
++
++struct platform_device *__init
++at32_add_device_ssc(unsigned int id, unsigned int flags)
++{
++	struct platform_device *pdev;
++
++	switch (id) {
++	case 0:
++		pdev = &ssc0_device;
++		if (flags & ATMEL_SSC_RF)
++			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
++		if (flags & ATMEL_SSC_RK)
++			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
++		if (flags & ATMEL_SSC_TK)
++			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
++		if (flags & ATMEL_SSC_TF)
++			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
++		if (flags & ATMEL_SSC_TD)
++			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
++		if (flags & ATMEL_SSC_RD)
++			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
++		break;
++	case 1:
++		pdev = &ssc1_device;
++		if (flags & ATMEL_SSC_RF)
++			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
++		if (flags & ATMEL_SSC_RK)
++			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
++		if (flags & ATMEL_SSC_TK)
++			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
++		if (flags & ATMEL_SSC_TF)
++			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
++		if (flags & ATMEL_SSC_TD)
++			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
++		if (flags & ATMEL_SSC_RD)
++			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
++		break;
++	case 2:
++		pdev = &ssc2_device;
++		if (flags & ATMEL_SSC_TD)
++			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
++		if (flags & ATMEL_SSC_RD)
++			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
++		if (flags & ATMEL_SSC_TK)
++			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
++		if (flags & ATMEL_SSC_TF)
++			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
++		if (flags & ATMEL_SSC_RF)
++			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
++		if (flags & ATMEL_SSC_RK)
++			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
++		break;
++	default:
++		return NULL;
++	}
++
++	platform_device_register(pdev);
++	return pdev;
++}
++
++/* --------------------------------------------------------------------
++ *  USB Device Controller
++ * -------------------------------------------------------------------- */
++static struct resource usba0_resource[] __initdata = {
++	{
++		.start		= 0xff300000,
++		.end		= 0xff3fffff,
++		.flags		= IORESOURCE_MEM,
++	}, {
++		.start		= 0xfff03000,
++		.end		= 0xfff033ff,
++		.flags		= IORESOURCE_MEM,
++	},
++	IRQ(31),
++};
++static struct clk usba0_pclk = {
++	.name		= "pclk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 12,
++};
++static struct clk usba0_hclk = {
++	.name		= "hclk",
++	.parent		= &hsb_clk,
++	.mode		= hsb_clk_mode,
++	.get_rate	= hsb_clk_get_rate,
++	.index		= 6,
++};
++
++struct platform_device *__init
++at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
++{
++	struct platform_device *pdev;
++
++	if (id != 0)
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_usba_udc", 0);
++	if (!pdev)
++		return NULL;
++
++	if (platform_device_add_resources(pdev, usba0_resource,
++					  ARRAY_SIZE(usba0_resource)))
++		goto out_free_pdev;
++
++	if (data) {
++		if (platform_device_add_data(pdev, data, sizeof(*data)))
++			goto out_free_pdev;
++
++		if (data->vbus_pin != GPIO_PIN_NONE)
++			at32_select_gpio(data->vbus_pin, 0);
++	}
++
++	usba0_pclk.dev = &pdev->dev;
++	usba0_hclk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++
++	return pdev;
++
++out_free_pdev:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * IDE / CompactFlash
++ * -------------------------------------------------------------------- */
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7001)
++static struct resource at32_smc_cs4_resource[] __initdata = {
++	{
++		.start	= 0x04000000,
++		.end	= 0x07ffffff,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(~0UL), /* Magic IRQ will be overridden */
++};
++static struct resource at32_smc_cs5_resource[] __initdata = {
++	{
++		.start	= 0x20000000,
++		.end	= 0x23ffffff,
++		.flags	= IORESOURCE_MEM,
++	},
++	IRQ(~0UL), /* Magic IRQ will be overridden */
++};
++
++static int __init at32_init_ide_or_cf(struct platform_device *pdev,
++		unsigned int cs, unsigned int extint)
++{
++	static unsigned int extint_pin_map[4] __initdata = {
++		GPIO_PIN_PB(25),
++		GPIO_PIN_PB(26),
++		GPIO_PIN_PB(27),
++		GPIO_PIN_PB(28),
++	};
++	static bool common_pins_initialized __initdata = false;
++	unsigned int extint_pin;
++	int ret;
++
++	if (extint >= ARRAY_SIZE(extint_pin_map))
++		return -EINVAL;
++	extint_pin = extint_pin_map[extint];
++
++	switch (cs) {
++	case 4:
++		ret = platform_device_add_resources(pdev,
++				at32_smc_cs4_resource,
++				ARRAY_SIZE(at32_smc_cs4_resource));
++		if (ret)
++			return ret;
++
++		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
++		set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
++		break;
++	case 5:
++		ret = platform_device_add_resources(pdev,
++				at32_smc_cs5_resource,
++				ARRAY_SIZE(at32_smc_cs5_resource));
++		if (ret)
++			return ret;
++
++		select_peripheral(PE(22), PERIPH_A, 0); /* NCS5   -> OE_N  */
++		set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	if (!common_pins_initialized) {
++		select_peripheral(PE(19), PERIPH_A, 0);	/* CFCE1  -> CS0_N */
++		select_peripheral(PE(20), PERIPH_A, 0);	/* CFCE2  -> CS1_N */
++		select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW  -> DIR   */
++		select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT  <- IORDY */
++		common_pins_initialized = true;
++	}
++
++	at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
++
++	pdev->resource[1].start = EIM_IRQ_BASE + extint;
++	pdev->resource[1].end = pdev->resource[1].start;
++
++	return 0;
++}
++
++struct platform_device *__init
++at32_add_device_ide(unsigned int id, unsigned int extint,
++		    struct ide_platform_data *data)
++{
++	struct platform_device *pdev;
++
++	pdev = platform_device_alloc("at32_ide", id);
++	if (!pdev)
++		goto fail;
++
++	if (platform_device_add_data(pdev, data,
++				sizeof(struct ide_platform_data)))
++		goto fail;
++
++	if (at32_init_ide_or_cf(pdev, data->cs, extint))
++		goto fail;
++
++	platform_device_add(pdev);
++	return pdev;
++
++fail:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++struct platform_device *__init
++at32_add_device_cf(unsigned int id, unsigned int extint,
++		    struct cf_platform_data *data)
++{
++	struct platform_device *pdev;
++
++	pdev = platform_device_alloc("at32_cf", id);
++	if (!pdev)
++		goto fail;
++
++	if (platform_device_add_data(pdev, data,
++				sizeof(struct cf_platform_data)))
++		goto fail;
++
++	if (at32_init_ide_or_cf(pdev, data->cs, extint))
++		goto fail;
++
++	if (data->detect_pin != GPIO_PIN_NONE)
++		at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
++	if (data->reset_pin != GPIO_PIN_NONE)
++		at32_select_gpio(data->reset_pin, 0);
++	if (data->vcc_pin != GPIO_PIN_NONE)
++		at32_select_gpio(data->vcc_pin, 0);
++	/* READY is used as extint, so we can't select it as gpio */
++
++	platform_device_add(pdev);
++	return pdev;
++
++fail:
++	platform_device_put(pdev);
++	return NULL;
++}
++#endif
++
++/* --------------------------------------------------------------------
++ * AC97C
++ * -------------------------------------------------------------------- */
++static struct resource atmel_ac97c0_resource[] __initdata = {
++	PBMEM(0xfff02800),
++	IRQ(29),
++};
++static struct clk atmel_ac97c0_pclk = {
++	.name		= "pclk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 10,
++};
++
++struct platform_device *__init at32_add_device_ac97c(unsigned int id)
++{
++	struct platform_device *pdev;
++
++	if (id != 0)
++		return NULL;
++
++	pdev = platform_device_alloc("atmel_ac97c", id);
++	if (!pdev)
++		return NULL;
++
++	if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
++				ARRAY_SIZE(atmel_ac97c0_resource)))
++		goto err_add_resources;
++
++	select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
++	select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
++	select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
++	select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
++
++	atmel_ac97c0_pclk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++	return pdev;
++
++err_add_resources:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * ABDAC
++ * -------------------------------------------------------------------- */
++static struct resource abdac0_resource[] __initdata = {
++	PBMEM(0xfff02000),
++	IRQ(27),
++};
++static struct clk abdac0_pclk = {
++	.name		= "pclk",
++	.parent		= &pbb_clk,
++	.mode		= pbb_clk_mode,
++	.get_rate	= pbb_clk_get_rate,
++	.index		= 8,
++};
++static struct clk abdac0_sample_clk = {
++	.name		= "sample_clk",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 6,
++};
++
++struct platform_device *__init at32_add_device_abdac(unsigned int id)
++{
++	struct platform_device *pdev;
++
++	if (id != 0)
++		return NULL;
++
++	pdev = platform_device_alloc("abdac", id);
++	if (!pdev)
++		return NULL;
++
++	if (platform_device_add_resources(pdev, abdac0_resource,
++				ARRAY_SIZE(abdac0_resource)))
++		goto err_add_resources;
++
++	select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
++	select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
++	select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
++	select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
++
++	abdac0_pclk.dev = &pdev->dev;
++	abdac0_sample_clk.dev = &pdev->dev;
++
++	platform_device_add(pdev);
++	return pdev;
++
++err_add_resources:
++	platform_device_put(pdev);
++	return NULL;
++}
++
++/* --------------------------------------------------------------------
++ *  GCLK
++ * -------------------------------------------------------------------- */
++static struct clk gclk0 = {
++	.name		= "gclk0",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 0,
++};
++static struct clk gclk1 = {
++	.name		= "gclk1",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 1,
++};
++static struct clk gclk2 = {
++	.name		= "gclk2",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 2,
++};
++static struct clk gclk3 = {
++	.name		= "gclk3",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 3,
++};
++static struct clk gclk4 = {
++	.name		= "gclk4",
++	.mode		= genclk_mode,
++	.get_rate	= genclk_get_rate,
++	.set_rate	= genclk_set_rate,
++	.set_parent	= genclk_set_parent,
++	.index		= 4,
++};
++
++struct clk *at32_clock_list[] = {
++	&osc32k,
++	&osc0,
++	&osc1,
++	&pll0,
++	&pll1,
++	&cpu_clk,
++	&hsb_clk,
++	&pba_clk,
++	&pbb_clk,
++	&at32_pm_pclk,
++	&at32_intc0_pclk,
++	&hmatrix_clk,
++	&ebi_clk,
++	&hramc_clk,
++	&smc0_pclk,
++	&smc0_mck,
++	&pdc_hclk,
++	&pdc_pclk,
++	&dmaca0_hclk,
++	&pico_clk,
++	&pio0_mck,
++	&pio1_mck,
++	&pio2_mck,
++	&pio3_mck,
++	&pio4_mck,
++	&at32_systc0_pclk,
++	&atmel_usart0_usart,
++	&atmel_usart1_usart,
++	&atmel_usart2_usart,
++	&atmel_usart3_usart,
++	&atmel_pwm0_mck,
++#if defined(CONFIG_CPU_AT32AP7000)
++	&macb0_hclk,
++	&macb0_pclk,
++	&macb1_hclk,
++	&macb1_pclk,
++#endif
++	&atmel_spi0_spi_clk,
++	&atmel_spi1_spi_clk,
++	&atmel_twi0_pclk,
++	&atmel_mci0_pclk,
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
++	&atmel_lcdfb0_hck1,
++	&atmel_lcdfb0_pixclk,
++#endif
++	&ssc0_pclk,
++	&ssc1_pclk,
++	&ssc2_pclk,
++	&usba0_hclk,
++	&usba0_pclk,
++	&atmel_ac97c0_pclk,
++	&abdac0_pclk,
++	&abdac0_sample_clk,
++	&gclk0,
++	&gclk1,
++	&gclk2,
++	&gclk3,
++	&gclk4,
++};
++unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
++
++void __init at32_portmux_init(void)
++{
++	at32_init_pio(&pio0_device);
++	at32_init_pio(&pio1_device);
++	at32_init_pio(&pio2_device);
++	at32_init_pio(&pio3_device);
++	at32_init_pio(&pio4_device);
++}
++
++void __init at32_clock_init(void)
++{
++	u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
++	int i;
++
++	if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
++		main_clock = &pll0;
++		cpu_clk.parent = &pll0;
++	} else {
++		main_clock = &osc0;
++		cpu_clk.parent = &osc0;
++	}
++
++	if (pm_readl(PLL0) & PM_BIT(PLLOSC))
++		pll0.parent = &osc1;
++	if (pm_readl(PLL1) & PM_BIT(PLLOSC))
++		pll1.parent = &osc1;
++
++	genclk_init_parent(&gclk0);
++	genclk_init_parent(&gclk1);
++	genclk_init_parent(&gclk2);
++	genclk_init_parent(&gclk3);
++	genclk_init_parent(&gclk4);
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
++	genclk_init_parent(&atmel_lcdfb0_pixclk);
++#endif
++	genclk_init_parent(&abdac0_sample_clk);
++
++	/*
++	 * Turn on all clocks that have at least one user already, and
++	 * turn off everything else. We only do this for module
++	 * clocks, and even though it isn't particularly pretty to
++	 * check the address of the mode function, it should do the
++	 * trick...
++	 */
++	for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
++		struct clk *clk = at32_clock_list[i];
++
++		if (clk->users == 0)
++			continue;
++
++		if (clk->mode == &cpu_clk_mode)
++			cpu_mask |= 1 << clk->index;
++		else if (clk->mode == &hsb_clk_mode)
++			hsb_mask |= 1 << clk->index;
++		else if (clk->mode == &pba_clk_mode)
++			pba_mask |= 1 << clk->index;
++		else if (clk->mode == &pbb_clk_mode)
++			pbb_mask |= 1 << clk->index;
++	}
++
++	pm_writel(CPU_MASK, cpu_mask);
++	pm_writel(HSB_MASK, hsb_mask);
++	pm_writel(PBA_MASK, pba_mask);
++	pm_writel(PBB_MASK, pbb_mask);
++}
+diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/extint.c linux-avr32/arch/avr32/mach-at32ap/extint.c
+--- linux-2.6.24/arch/avr32/mach-at32ap/extint.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/mach-at32ap/extint.c	2008-02-01 14:51:35.000000000 -0500
+@@ -26,16 +26,10 @@
+ #define EIC_MODE				0x0014
+ #define EIC_EDGE				0x0018
+ #define EIC_LEVEL				0x001c
+-#define EIC_TEST				0x0020
+ #define EIC_NMIC				0x0024
+ 
+-/* Bitfields in TEST */
+-#define EIC_TESTEN_OFFSET			31
+-#define EIC_TESTEN_SIZE				1
+-
+ /* Bitfields in NMIC */
+-#define EIC_EN_OFFSET				0
+-#define EIC_EN_SIZE				1
++#define EIC_NMIC_ENABLE				(1 << 0)
+ 
+ /* Bit manipulation macros */
+ #define EIC_BIT(name)					\
+@@ -63,6 +57,9 @@ struct eic {
+ 	unsigned int first_irq;
+ };
+ 
++static struct eic *nmi_eic;
++static bool nmi_enabled;
++
+ static void eic_ack_irq(unsigned int irq)
+ {
+ 	struct eic *eic = get_irq_chip_data(irq);
+@@ -133,8 +130,11 @@ static int eic_set_irq_type(unsigned int
+ 		eic_writel(eic, EDGE, edge);
+ 		eic_writel(eic, LEVEL, level);
+ 
+-		if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
++		if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
+ 			flow_type |= IRQ_LEVEL;
++			__set_irq_handler_unlocked(irq, handle_level_irq);
++		} else
++			__set_irq_handler_unlocked(irq, handle_edge_irq);
+ 		desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+ 		desc->status |= flow_type;
+ 	}
+@@ -154,9 +154,8 @@ static struct irq_chip eic_chip = {
+ static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
+ {
+ 	struct eic *eic = desc->handler_data;
+-	struct irq_desc *ext_desc;
+ 	unsigned long status, pending;
+-	unsigned int i, ext_irq;
++	unsigned int i;
+ 
+ 	status = eic_readl(eic, ISR);
+ 	pending = status & eic_readl(eic, IMR);
+@@ -165,15 +164,28 @@ static void demux_eic_irq(unsigned int i
+ 		i = fls(pending) - 1;
+ 		pending &= ~(1 << i);
+ 
+-		ext_irq = i + eic->first_irq;
+-		ext_desc = irq_desc + ext_irq;
+-		if (ext_desc->status & IRQ_LEVEL)
+-			handle_level_irq(ext_irq, ext_desc);
+-		else
+-			handle_edge_irq(ext_irq, ext_desc);
++		generic_handle_irq(i + eic->first_irq);
+ 	}
+ }
+ 
++int nmi_enable(void)
++{
++	nmi_enabled = true;
++
++	if (nmi_eic)
++		eic_writel(nmi_eic, NMIC, EIC_NMIC_ENABLE);
++
++	return 0;
++}
++
++void nmi_disable(void)
++{
++	if (nmi_eic)
++		eic_writel(nmi_eic, NMIC, 0);
++
++	nmi_enabled = false;
++}
++
+ static int __init eic_probe(struct platform_device *pdev)
+ {
+ 	struct eic *eic;
+@@ -214,14 +226,13 @@ static int __init eic_probe(struct platf
+ 	pattern = eic_readl(eic, MODE);
+ 	nr_irqs = fls(pattern);
+ 
+-	/* Trigger on falling edge unless overridden by driver */
+-	eic_writel(eic, MODE, 0UL);
++	/* Trigger on low level unless overridden by driver */
+ 	eic_writel(eic, EDGE, 0UL);
++	eic_writel(eic, LEVEL, 0UL);
+ 
+ 	eic->chip = &eic_chip;
+ 
+ 	for (i = 0; i < nr_irqs; i++) {
+-		/* NOTE the handler we set here is ignored by the demux */
+ 		set_irq_chip_and_handler(eic->first_irq + i, &eic_chip,
+ 					 handle_level_irq);
+ 		set_irq_chip_data(eic->first_irq + i, eic);
+@@ -230,6 +241,16 @@ static int __init eic_probe(struct platf
+ 	set_irq_chained_handler(int_irq, demux_eic_irq);
+ 	set_irq_data(int_irq, eic);
+ 
++	if (pdev->id == 0) {
++		nmi_eic = eic;
++		if (nmi_enabled)
++			/*
++			 * Someone tried to enable NMI before we were
++			 * ready. Do it now.
++			 */
++			nmi_enable();
++	}
++
+ 	dev_info(&pdev->dev,
+ 		 "External Interrupt Controller at 0x%p, IRQ %u\n",
+ 		 eic->regs, int_irq);
+diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/gpio-dev.c linux-avr32/arch/avr32/mach-at32ap/gpio-dev.c
+--- linux-2.6.24/arch/avr32/mach-at32ap/gpio-dev.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/mach-at32ap/gpio-dev.c	2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,573 @@
++/*
++ * GPIO /dev and configfs interface
++ *
++ * Copyright (C) 2006-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/kernel.h>
++#include <linux/configfs.h>
++#include <linux/cdev.h>
++#include <linux/device.h>
++#include <linux/fs.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/poll.h>
++#include <linux/uaccess.h>
++#include <linux/wait.h>
++
++#include <asm/gpio.h>
++#include <asm/arch/portmux.h>
++
++#define GPIO_DEV_MAX			8
++
++static struct class *gpio_dev_class;
++static dev_t gpio_devt;
++
++struct gpio_item {
++	spinlock_t lock;
++
++	int enabled;
++	int initialized;
++	int port;
++	u32 pin_mask;
++	u32 oe_mask;
++
++	/* Pin state last time we read it (for blocking reads) */
++	u32 pin_state;
++	int changed;
++
++	wait_queue_head_t change_wq;
++	struct fasync_struct *async_queue;
++
++	int id;
++	struct class_device *gpio_dev;
++	struct cdev char_dev;
++	struct config_item item;
++};
++
++struct gpio_attribute {
++	struct configfs_attribute attr;
++	ssize_t (*show)(struct gpio_item *, char *);
++	ssize_t (*store)(struct gpio_item *, const char *, size_t);
++};
++
++static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
++{
++	struct gpio_item *gpio = dev_id;
++	u32 old_state, new_state;
++
++	old_state = gpio->pin_state;
++	new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
++	gpio->pin_state = new_state;
++
++	if (new_state != old_state) {
++		gpio->changed = 1;
++		wake_up_interruptible(&gpio->change_wq);
++
++		if (gpio->async_queue)
++			kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
++	}
++
++	return IRQ_HANDLED;
++}
++
++static int gpio_dev_open(struct inode *inode, struct file *file)
++{
++	struct gpio_item *gpio = container_of(inode->i_cdev,
++					      struct gpio_item,
++					      char_dev);
++	unsigned int irq;
++	unsigned int i;
++	int ret;
++
++	nonseekable_open(inode, file);
++	config_item_get(&gpio->item);
++	file->private_data = gpio;
++
++	gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
++						       gpio->pin_mask);
++	gpio->changed = 1;
++
++	for (i = 0; i < 32; i++) {
++		if (gpio->pin_mask & (1 << i)) {
++			irq = gpio_to_irq(32 * gpio->port + i);
++			ret = request_irq(irq, gpio_dev_interrupt, 0,
++					  "gpio-dev", gpio);
++			if (ret)
++				goto err_irq;
++		}
++	}
++
++	return 0;
++
++err_irq:
++	while (i--) {
++		if (gpio->pin_mask & (1 << i)) {
++			irq = gpio_to_irq(32 * gpio->port + i);
++			free_irq(irq, gpio);
++		}
++	}
++
++	config_item_put(&gpio->item);
++
++	return ret;
++}
++
++static int gpio_dev_fasync(int fd, struct file *file, int mode)
++{
++	struct gpio_item *gpio = file->private_data;
++
++	return fasync_helper(fd, file, mode, &gpio->async_queue);
++}
++
++static int gpio_dev_release(struct inode *inode, struct file *file)
++{
++	struct gpio_item *gpio = file->private_data;
++	unsigned int irq;
++	unsigned int i;
++
++	gpio_dev_fasync(-1, file, 0);
++
++	for (i = 0; i < 32; i++) {
++		if (gpio->pin_mask & (1 << i)) {
++			irq = gpio_to_irq(32 * gpio->port + i);
++			free_irq(irq, gpio);
++		}
++	}
++
++	config_item_put(&gpio->item);
++
++	return 0;
++}
++
++static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
++{
++	struct gpio_item *gpio = file->private_data;
++	unsigned int mask = 0;
++
++	poll_wait(file, &gpio->change_wq, wait);
++	if (gpio->changed)
++		mask |= POLLIN | POLLRDNORM;
++
++	return mask;
++}
++
++static ssize_t gpio_dev_read(struct file *file, char __user *buf,
++			     size_t count, loff_t *offset)
++{
++	struct gpio_item *gpio = file->private_data;
++	u32 value;
++
++	spin_lock_irq(&gpio->lock);
++	while (!gpio->changed) {
++		spin_unlock_irq(&gpio->lock);
++
++		if (file->f_flags & O_NONBLOCK)
++			return -EAGAIN;
++
++		if (wait_event_interruptible(gpio->change_wq, gpio->changed))
++			return -ERESTARTSYS;
++
++		spin_lock_irq(&gpio->lock);
++	}
++
++	gpio->changed = 0;
++	value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
++
++	spin_unlock_irq(&gpio->lock);
++
++	count = min(count, (size_t)4);
++	if (copy_to_user(buf, &value, count))
++		return -EFAULT;
++
++	return count;
++}
++
++static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
++			      size_t count, loff_t *offset)
++{
++	struct gpio_item *gpio = file->private_data;
++	u32 value = 0;
++	u32 mask = ~0UL;
++
++	count = min(count, (size_t)4);
++	if (copy_from_user(&value, buf, count))
++		return -EFAULT;
++
++	/* Assuming big endian */
++	mask <<= (4 - count) * 8;
++	mask &= gpio->pin_mask;
++
++	at32_gpio_set_value_multiple(gpio->port, value, mask);
++
++	return count;
++}
++
++static struct file_operations gpio_dev_fops = {
++	.owner		= THIS_MODULE,
++	.llseek		= no_llseek,
++	.open		= gpio_dev_open,
++	.release	= gpio_dev_release,
++	.fasync		= gpio_dev_fasync,
++	.poll		= gpio_dev_poll,
++	.read		= gpio_dev_read,
++	.write		= gpio_dev_write,
++};
++
++static struct gpio_item *to_gpio_item(struct config_item *item)
++{
++	return item ? container_of(item, struct gpio_item, item) : NULL;
++}
++
++static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
++{
++	return sprintf(page, "%d\n", gpio->port);
++}
++
++static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
++				  const char *page, size_t count)
++{
++	unsigned long id;
++	char *p = (char *)page;
++	ssize_t ret = -EINVAL;
++
++	id = simple_strtoul(p, &p, 0);
++	if (!p || (*p && (*p != '\n')))
++		return -EINVAL;
++
++	/* Switching PIO is not allowed when live... */
++	spin_lock(&gpio->lock);
++	if (!gpio->enabled) {
++		ret = -ENXIO;
++		if (at32_gpio_port_is_valid(id)) {
++			gpio->port = id;
++			ret = count;
++		}
++	}
++	spin_unlock(&gpio->lock);
++
++	return ret;
++}
++
++static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
++{
++	return sprintf(page, "0x%08x\n", gpio->pin_mask);
++}
++
++static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
++				   const char *page, size_t count)
++{
++	u32 new_mask;
++	char *p = (char *)page;
++	ssize_t ret = -EINVAL;
++
++	new_mask = simple_strtoul(p, &p, 0);
++	if (!p || (*p && (*p != '\n')))
++		return -EINVAL;
++
++	/* Can't update the pin mask while live. */
++	spin_lock(&gpio->lock);
++	if (!gpio->enabled) {
++		gpio->oe_mask &= new_mask;
++		gpio->pin_mask = new_mask;
++		ret = count;
++	}
++	spin_unlock(&gpio->lock);
++
++	return ret;
++}
++
++static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
++{
++	return sprintf(page, "0x%08x\n", gpio->oe_mask);
++}
++
++static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
++				  const char *page, size_t count)
++{
++	u32 mask;
++	char *p = (char *)page;
++	ssize_t ret = -EINVAL;
++
++	mask = simple_strtoul(p, &p, 0);
++	if (!p || (*p && (*p != '\n')))
++		return -EINVAL;
++
++	spin_lock(&gpio->lock);
++	if (!gpio->enabled) {
++		gpio->oe_mask = mask & gpio->pin_mask;
++		ret = count;
++	}
++	spin_unlock(&gpio->lock);
++
++	return ret;
++}
++
++static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
++{
++	return sprintf(page, "%d\n", gpio->enabled);
++}
++
++static ssize_t gpio_store_enabled(struct gpio_item *gpio,
++				  const char *page, size_t count)
++{
++	char *p = (char *)page;
++	int enabled;
++	int ret;
++
++	enabled = simple_strtoul(p, &p, 0);
++	if (!p || (*p && (*p != '\n')))
++		return -EINVAL;
++
++	/* make it a boolean value */
++	enabled = !!enabled;
++
++	if (gpio->enabled == enabled)
++		/* No change; do nothing. */
++		return count;
++
++	BUG_ON(gpio->id >= GPIO_DEV_MAX);
++
++	if (!enabled) {
++		class_device_unregister(gpio->gpio_dev);
++		cdev_del(&gpio->char_dev);
++		at32_deselect_pins(gpio->port, gpio->pin_mask);
++		gpio->initialized = 0;
++	} else {
++		if (gpio->port < 0 || !gpio->pin_mask)
++			return -ENODEV;
++	}
++
++	/* Disallow any updates to gpio_id or pin_mask */
++	spin_lock(&gpio->lock);
++	gpio->enabled = enabled;
++	spin_unlock(&gpio->lock);
++
++	if (!enabled)
++		return count;
++
++	/* Now, try to allocate the pins */
++	ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
++	if (ret)
++		goto err_alloc_pins;
++
++	gpio->initialized = 1;
++
++	cdev_init(&gpio->char_dev, &gpio_dev_fops);
++	gpio->char_dev.owner = THIS_MODULE;
++	ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
++	if (ret < 0)
++		goto err_cdev_add;
++	gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
++					     MKDEV(MAJOR(gpio_devt), gpio->id),
++					     NULL,
++					     "gpio%d", gpio->id);
++	if (IS_ERR(gpio->gpio_dev)) {
++		printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
++		ret = PTR_ERR(gpio->gpio_dev);
++		goto err_class_dev;
++	}
++
++	printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
++	       gpio->id, gpio->port, gpio->pin_mask,
++	       MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
++
++	return 0;
++
++err_class_dev:
++	cdev_del(&gpio->char_dev);
++err_cdev_add:
++	at32_deselect_pins(gpio->port, gpio->pin_mask);
++	gpio->initialized = 0;
++err_alloc_pins:
++	spin_lock(&gpio->lock);
++	gpio->enabled = 0;
++	spin_unlock(&gpio->lock);
++
++	return ret;
++}
++
++static struct gpio_attribute gpio_item_attr_gpio_id = {
++	.attr = {
++		.ca_owner = THIS_MODULE,
++		.ca_name = "gpio_id",
++		.ca_mode = S_IRUGO | S_IWUSR,
++	},
++	.show = gpio_show_gpio_id,
++	.store = gpio_store_gpio_id,
++};
++static struct gpio_attribute gpio_item_attr_pin_mask = {
++	.attr = {
++		.ca_owner = THIS_MODULE,
++		.ca_name = "pin_mask",
++		.ca_mode = S_IRUGO | S_IWUSR,
++	},
++	.show = gpio_show_pin_mask,
++	.store = gpio_store_pin_mask,
++};
++static struct gpio_attribute gpio_item_attr_oe_mask = {
++	.attr = {
++		.ca_owner = THIS_MODULE,
++		.ca_name = "oe_mask",
++		.ca_mode = S_IRUGO | S_IWUSR,
++	},
++	.show = gpio_show_oe_mask,
++	.store = gpio_store_oe_mask,
++};
++static struct gpio_attribute gpio_item_attr_enabled = {
++	.attr = {
++		.ca_owner = THIS_MODULE,
++		.ca_name = "enabled",
++		.ca_mode = S_IRUGO | S_IWUSR,
++	},
++	.show = gpio_show_enabled,
++	.store = gpio_store_enabled,
++};
++
++static struct configfs_attribute *gpio_item_attrs[] = {
++	&gpio_item_attr_gpio_id.attr,
++	&gpio_item_attr_pin_mask.attr,
++	&gpio_item_attr_oe_mask.attr,
++	&gpio_item_attr_enabled.attr,
++	NULL,
++};
++
++static ssize_t gpio_show_attr(struct config_item *item,
++			      struct configfs_attribute *attr,
++			      char *page)
++{
++	struct gpio_item *gpio_item = to_gpio_item(item);
++	struct gpio_attribute *gpio_attr
++		= container_of(attr, struct gpio_attribute, attr);
++	ssize_t ret = 0;
++
++	if (gpio_attr->show)
++		ret = gpio_attr->show(gpio_item, page);
++	return ret;
++}
++
++static ssize_t gpio_store_attr(struct config_item *item,
++			       struct configfs_attribute *attr,
++			       const char *page, size_t count)
++{
++	struct gpio_item *gpio_item = to_gpio_item(item);
++	struct gpio_attribute *gpio_attr
++		= container_of(attr, struct gpio_attribute, attr);
++	ssize_t ret = -EINVAL;
++
++	if (gpio_attr->store)
++		ret = gpio_attr->store(gpio_item, page, count);
++	return ret;
++}
++
++static void gpio_release(struct config_item *item)
++{
++	kfree(to_gpio_item(item));
++}
++
++static struct configfs_item_operations gpio_item_ops = {
++	.release		= gpio_release,
++	.show_attribute		= gpio_show_attr,
++	.store_attribute	= gpio_store_attr,
++};
++
++static struct config_item_type gpio_item_type = {
++	.ct_item_ops	= &gpio_item_ops,
++	.ct_attrs	= gpio_item_attrs,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct config_item *gpio_make_item(struct config_group *group,
++					  const char *name)
++{
++	static int next_id;
++	struct gpio_item *gpio;
++
++	if (next_id >= GPIO_DEV_MAX)
++		return NULL;
++
++	gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
++	if (!gpio)
++		return NULL;
++
++	gpio->id = next_id++;
++	config_item_init_type_name(&gpio->item, name, &gpio_item_type);
++	spin_lock_init(&gpio->lock);
++	init_waitqueue_head(&gpio->change_wq);
++
++	return &gpio->item;
++}
++
++static void gpio_drop_item(struct config_group *group,
++			   struct config_item *item)
++{
++	struct gpio_item *gpio = to_gpio_item(item);
++
++	spin_lock(&gpio->lock);
++	if (gpio->enabled) {
++		class_device_unregister(gpio->gpio_dev);
++		cdev_del(&gpio->char_dev);
++	}
++
++	if (gpio->initialized) {
++		at32_deselect_pins(gpio->port, gpio->pin_mask);
++		gpio->initialized = 0;
++		gpio->enabled = 0;
++	}
++	spin_unlock(&gpio->lock);
++}
++
++static struct configfs_group_operations gpio_group_ops = {
++	.make_item	= gpio_make_item,
++	.drop_item	= gpio_drop_item,
++};
++
++static struct config_item_type gpio_group_type = {
++	.ct_group_ops	= &gpio_group_ops,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct configfs_subsystem gpio_subsys = {
++	.su_group = {
++		.cg_item = {
++			 .ci_namebuf = "gpio",
++			 .ci_type = &gpio_group_type,
++		 },
++	},
++};
++
++static int __init gpio_dev_init(void)
++{
++	int err;
++
++	gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
++	if (IS_ERR(gpio_dev_class)) {
++		err = PTR_ERR(gpio_dev_class);
++		goto err_class_create;
++	}
++
++	err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
++	if (err < 0)
++		goto err_alloc_chrdev;
++
++	/* Configfs initialization */
++	config_group_init(&gpio_subsys.su_group);
++	mutex_init(&gpio_subsys.su_mutex);
++	err = configfs_register_subsystem(&gpio_subsys);
++	if (err)
++		goto err_register_subsys;
++
++	return 0;
++
++err_register_subsys:
++	unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
++err_alloc_chrdev:
++	class_destroy(gpio_dev_class);
++err_class_create:
++	printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
++	return err;
++}
++late_initcall(gpio_dev_init);
+diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/Kconfig linux-avr32/arch/avr32/mach-at32ap/Kconfig
+--- linux-2.6.24/arch/avr32/mach-at32ap/Kconfig	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/mach-at32ap/Kconfig	2008-02-01 14:51:35.000000000 -0500
+@@ -3,9 +3,9 @@ if PLATFORM_AT32AP
+ menu "Atmel AVR32 AP options"
+ 
+ choice
+-	prompt "AT32AP7000 static memory bus width"
+-	depends on CPU_AT32AP7000
+-	default AP7000_16_BIT_SMC
++	prompt "AT32AP700x static memory bus width"
++	depends on CPU_AT32AP700X
++	default AP700X_16_BIT_SMC
+ 	help
+ 	  Define the width of the AP7000 external static memory interface.
+ 	  This is used to determine how to mangle the address and/or data
+@@ -15,17 +15,24 @@ choice
+ 	  width for all chip selects, excluding the flash (which is using
+ 	  raw access and is thus not affected by any of this.)
+ 
+-config AP7000_32_BIT_SMC
++config AP700X_32_BIT_SMC
+ 	bool "32 bit"
+ 
+-config AP7000_16_BIT_SMC
++config AP700X_16_BIT_SMC
+ 	bool "16 bit"
+ 
+-config AP7000_8_BIT_SMC
++config AP700X_8_BIT_SMC
+ 	bool "8 bit"
+ 
+ endchoice
+ 
++config GPIO_DEV
++	bool "GPIO /dev interface"
++	select CONFIGFS_FS
++	default n
++	help
++	  Say `Y' to enable a /dev interface to the GPIO pins.
++
+ endmenu
+ 
+ endif # PLATFORM_AT32AP
+diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/Makefile linux-avr32/arch/avr32/mach-at32ap/Makefile
+--- linux-2.6.24/arch/avr32/mach-at32ap/Makefile	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/mach-at32ap/Makefile	2008-02-01 14:51:35.000000000 -0500
+@@ -1,4 +1,5 @@
+ obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
+-obj-$(CONFIG_CPU_AT32AP7000)	+= at32ap7000.o
+-obj-$(CONFIG_CPU_AT32AP7000)	+= time-tc.o
++obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o
++obj-$(CONFIG_CPU_AT32AP700X)	+= time-tc.o
+ obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
++obj-$(CONFIG_GPIO_DEV)		+= gpio-dev.o
+diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/pio.c linux-avr32/arch/avr32/mach-at32ap/pio.c
+--- linux-2.6.24/arch/avr32/mach-at32ap/pio.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/mach-at32ap/pio.c	2008-02-01 14:51:35.000000000 -0500
+@@ -162,6 +162,82 @@ fail:
+ 	dump_stack();
+ }
+ 
++#ifdef CONFIG_GPIO_DEV
++
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port)
++{
++	return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
++}
++
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
++{
++	struct pio_device *pio;
++	u32 old, new;
++
++	pio = &pio_dev[port];
++	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
++
++	/* Try to allocate the pins */
++	do {
++		old = pio->pinmux_mask;
++		if (old & pins)
++			return -EBUSY;
++
++		new = old | pins;
++	} while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++
++	/* That went well, now configure the port */
++	pio_writel(pio, OER, oe_mask);
++	pio_writel(pio, PER, pins);
++
++	return 0;
++}
++
++void at32_deselect_pins(unsigned int port, u32 pins)
++{
++	struct pio_device *pio;
++	u32 old, new;
++
++	pio = &pio_dev[port];
++	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++	/* Return to a "safe" mux configuration */
++	pio_writel(pio, PUER, pins);
++	pio_writel(pio, ODR, pins);
++
++	/* Deallocate the pins */
++	do {
++		old = pio->pinmux_mask;
++		new = old & ~pins;
++	} while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++}
++
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
++{
++	struct pio_device *pio;
++
++	pio = &pio_dev[port];
++	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++	return pio_readl(pio, PDSR) & pins;
++}
++
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
++{
++	struct pio_device *pio;
++
++	pio = &pio_dev[port];
++	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++	/* No atomic updates for now... */
++	pio_writel(pio, CODR, ~value & mask);
++	pio_writel(pio, SODR, value & mask);
++}
++
++#endif /* CONFIG_GPIO_DEV */
++
++
+ /*--------------------------------------------------------------------------*/
+ 
+ /* GPIO API */
+diff -Nrup linux-2.6.24/arch/avr32/Makefile linux-avr32/arch/avr32/Makefile
+--- linux-2.6.24/arch/avr32/Makefile	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/Makefile	2008-02-01 14:51:35.000000000 -0500
+@@ -16,7 +16,7 @@ KBUILD_AFLAGS	+= -mrelax -mno-pic
+ CFLAGS_MODULE	+= -mno-relax
+ LDFLAGS_vmlinux	+= --relax
+ 
+-cpuflags-$(CONFIG_CPU_AT32AP7000)	+= -mcpu=ap7000
++cpuflags-$(CONFIG_PLATFORM_AT32AP)	+= -march=ap
+ 
+ KBUILD_CFLAGS	+= $(cpuflags-y)
+ KBUILD_AFLAGS	+= $(cpuflags-y)
+@@ -31,6 +31,8 @@ core-$(CONFIG_BOARD_ATNGW100)		+= arch/a
+ core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
+ core-y					+= arch/avr32/kernel/
+ core-y					+= arch/avr32/mm/
++drivers-$(CONFIG_OPROFILE)		+= arch/avr32/oprofile/
++drivers-y				+= arch/avr32/drivers/
+ libs-y					+= arch/avr32/lib/
+ 
+ archincdir-$(CONFIG_PLATFORM_AT32AP)	:= arch-at32ap
+diff -Nrup linux-2.6.24/arch/avr32/mm/dma-coherent.c linux-avr32/arch/avr32/mm/dma-coherent.c
+--- linux-2.6.24/arch/avr32/mm/dma-coherent.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/mm/dma-coherent.c	2008-02-01 14:51:35.000000000 -0500
+@@ -41,6 +41,13 @@ static struct page *__dma_alloc(struct d
+ 	struct page *page, *free, *end;
+ 	int order;
+ 
++	/* Following is a work-around (a.k.a. hack) to prevent pages
++	 * with __GFP_COMP being passed to split_page() which cannot
++	 * handle them.  The real problem is that this flag probably
++	 * should be 0 on AVR32 as it is not supported on this
++	 * platform--see CONFIG_HUGETLB_PAGE. */
++	gfp &= ~(__GFP_COMP);
++
+ 	size = PAGE_ALIGN(size);
+ 	order = get_order(size);
+ 
+diff -Nrup linux-2.6.24/arch/avr32/mm/tlb.c linux-avr32/arch/avr32/mm/tlb.c
+--- linux-2.6.24/arch/avr32/mm/tlb.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/mm/tlb.c	2008-02-01 14:51:35.000000000 -0500
+@@ -348,7 +348,7 @@ static int tlb_show(struct seq_file *tlb
+ 	return 0;
+ }
+ 
+-static struct seq_operations tlb_ops = {
++static const struct seq_operations tlb_ops = {
+ 	.start		= tlb_start,
+ 	.next		= tlb_next,
+ 	.stop		= tlb_stop,
+diff -Nrup linux-2.6.24/arch/avr32/oprofile/Makefile linux-avr32/arch/avr32/oprofile/Makefile
+--- linux-2.6.24/arch/avr32/oprofile/Makefile	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/oprofile/Makefile	2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,8 @@
++obj-$(CONFIG_OPROFILE) += oprofile.o
++
++oprofile-y		:= $(addprefix ../../../drivers/oprofile/,	\
++				oprof.o cpu_buffer.o buffer_sync.o	\
++				event_buffer.o oprofile_files.o		\
++				oprofilefs.o oprofile_stats.o		\
++				timer_int.o)
++oprofile-y		+= op_model_avr32.o
+diff -Nrup linux-2.6.24/arch/avr32/oprofile/op_model_avr32.c linux-avr32/arch/avr32/oprofile/op_model_avr32.c
+--- linux-2.6.24/arch/avr32/oprofile/op_model_avr32.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/oprofile/op_model_avr32.c	2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,235 @@
++/*
++ * AVR32 Performance Counter Driver
++ *
++ * Copyright (C) 2005-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Author: Ronny Pedersen
++ */
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/oprofile.h>
++#include <linux/sched.h>
++#include <linux/types.h>
++
++#include <asm/intc.h>
++#include <asm/sysreg.h>
++#include <asm/system.h>
++
++#define AVR32_PERFCTR_IRQ_GROUP	0
++#define AVR32_PERFCTR_IRQ_LINE	1
++
++enum { PCCNT, PCNT0, PCNT1, NR_counter };
++
++struct avr32_perf_counter {
++	unsigned long	enabled;
++	unsigned long	event;
++	unsigned long	count;
++	unsigned long	unit_mask;
++	unsigned long	kernel;
++	unsigned long	user;
++
++	u32		ie_mask;
++	u32		flag_mask;
++};
++
++static struct avr32_perf_counter counter[NR_counter] = {
++	{
++		.ie_mask	= SYSREG_BIT(IEC),
++		.flag_mask	= SYSREG_BIT(FC),
++	}, {
++		.ie_mask	= SYSREG_BIT(IE0),
++		.flag_mask	= SYSREG_BIT(F0),
++	}, {
++		.ie_mask	= SYSREG_BIT(IE1),
++		.flag_mask	= SYSREG_BIT(F1),
++	},
++};
++
++static void avr32_perf_counter_reset(void)
++{
++	/* Reset all counter and disable/clear all interrupts */
++	sysreg_write(PCCR, (SYSREG_BIT(PCCR_R)
++				| SYSREG_BIT(PCCR_C)
++				| SYSREG_BIT(FC)
++				| SYSREG_BIT(F0)
++				| SYSREG_BIT(F1)));
++}
++
++static irqreturn_t avr32_perf_counter_interrupt(int irq, void *dev_id)
++{
++	struct avr32_perf_counter *ctr = dev_id;
++	struct pt_regs *regs;
++	u32 pccr;
++
++	if (likely(!(intc_get_pending(AVR32_PERFCTR_IRQ_GROUP)
++					& (1 << AVR32_PERFCTR_IRQ_LINE))))
++		return IRQ_NONE;
++
++	regs = get_irq_regs();
++	pccr = sysreg_read(PCCR);
++
++	/* Clear the interrupt flags we're about to handle */
++	sysreg_write(PCCR, pccr);
++
++	/* PCCNT */
++	if (ctr->enabled && (pccr & ctr->flag_mask)) {
++		sysreg_write(PCCNT, -ctr->count);
++		oprofile_add_sample(regs, PCCNT);
++	}
++	ctr++;
++	/* PCNT0 */
++	if (ctr->enabled && (pccr & ctr->flag_mask)) {
++		sysreg_write(PCNT0, -ctr->count);
++		oprofile_add_sample(regs, PCNT0);
++	}
++	ctr++;
++	/* PCNT1 */
++	if (ctr->enabled && (pccr & ctr->flag_mask)) {
++		sysreg_write(PCNT1, -ctr->count);
++		oprofile_add_sample(regs, PCNT1);
++	}
++
++	return IRQ_HANDLED;
++}
++
++static int avr32_perf_counter_create_files(struct super_block *sb,
++		struct dentry *root)
++{
++	struct dentry *dir;
++	unsigned int i;
++	char filename[4];
++
++	for (i = 0; i < NR_counter; i++) {
++		snprintf(filename, sizeof(filename), "%u", i);
++		dir = oprofilefs_mkdir(sb, root, filename);
++
++		oprofilefs_create_ulong(sb, dir, "enabled",
++				&counter[i].enabled);
++		oprofilefs_create_ulong(sb, dir, "event",
++				&counter[i].event);
++		oprofilefs_create_ulong(sb, dir, "count",
++				&counter[i].count);
++
++		/* Dummy entries */
++		oprofilefs_create_ulong(sb, dir, "kernel",
++				&counter[i].kernel);
++		oprofilefs_create_ulong(sb, dir, "user",
++				&counter[i].user);
++		oprofilefs_create_ulong(sb, dir, "unit_mask",
++				&counter[i].unit_mask);
++	}
++
++	return 0;
++}
++
++static int avr32_perf_counter_setup(void)
++{
++	struct avr32_perf_counter *ctr;
++	u32 pccr;
++	int ret;
++	int i;
++
++	pr_debug("avr32_perf_counter_setup\n");
++
++	if (sysreg_read(PCCR) & SYSREG_BIT(PCCR_E)) {
++		printk(KERN_ERR
++			"oprofile: setup: perf counter already enabled\n");
++		return -EBUSY;
++	}
++
++	ret = request_irq(AVR32_PERFCTR_IRQ_GROUP,
++			avr32_perf_counter_interrupt, IRQF_SHARED,
++			"oprofile", counter);
++	if (ret)
++		return ret;
++
++	avr32_perf_counter_reset();
++
++	pccr = 0;
++	for (i = PCCNT; i < NR_counter; i++) {
++		ctr = &counter[i];
++		if (!ctr->enabled)
++			continue;
++
++		pr_debug("enabling counter %d...\n", i);
++
++		pccr |= ctr->ie_mask;
++
++		switch (i) {
++		case PCCNT:
++			/* PCCNT always counts cycles, so no events */
++			sysreg_write(PCCNT, -ctr->count);
++			break;
++		case PCNT0:
++			pccr |= SYSREG_BF(CONF0, ctr->event);
++			sysreg_write(PCNT0, -ctr->count);
++			break;
++		case PCNT1:
++			pccr |= SYSREG_BF(CONF1, ctr->event);
++			sysreg_write(PCNT1, -ctr->count);
++			break;
++		}
++	}
++
++	pr_debug("oprofile: writing 0x%x to PCCR...\n", pccr);
++
++	sysreg_write(PCCR, pccr);
++
++	return 0;
++}
++
++static void avr32_perf_counter_shutdown(void)
++{
++	pr_debug("avr32_perf_counter_shutdown\n");
++
++	avr32_perf_counter_reset();
++	free_irq(AVR32_PERFCTR_IRQ_GROUP, counter);
++}
++
++static int avr32_perf_counter_start(void)
++{
++	pr_debug("avr32_perf_counter_start\n");
++
++	sysreg_write(PCCR, sysreg_read(PCCR) | SYSREG_BIT(PCCR_E));
++
++	return 0;
++}
++
++static void avr32_perf_counter_stop(void)
++{
++	pr_debug("avr32_perf_counter_stop\n");
++
++	sysreg_write(PCCR, sysreg_read(PCCR) & ~SYSREG_BIT(PCCR_E));
++}
++
++static struct oprofile_operations avr32_perf_counter_ops __initdata = {
++	.create_files	= avr32_perf_counter_create_files,
++	.setup		= avr32_perf_counter_setup,
++	.shutdown	= avr32_perf_counter_shutdown,
++	.start		= avr32_perf_counter_start,
++	.stop		= avr32_perf_counter_stop,
++	.cpu_type	= "avr32",
++};
++
++int __init oprofile_arch_init(struct oprofile_operations *ops)
++{
++	if (!(current_cpu_data.features & AVR32_FEATURE_PCTR))
++		return -ENODEV;
++
++	memcpy(ops, &avr32_perf_counter_ops,
++			sizeof(struct oprofile_operations));
++
++	printk(KERN_INFO "oprofile: using AVR32 performance monitoring.\n");
++
++	return 0;
++}
++
++void oprofile_arch_exit(void)
++{
++
++}
+diff -Nrup linux-2.6.24/Documentation/kernel-parameters.txt linux-avr32/Documentation/kernel-parameters.txt
+--- linux-2.6.24/Documentation/kernel-parameters.txt	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/Documentation/kernel-parameters.txt	2008-02-01 14:51:34.000000000 -0500
+@@ -34,6 +34,7 @@ parameter is applicable:
+ 	ALSA	ALSA sound support is enabled.
+ 	APIC	APIC support is enabled.
+ 	APM	Advanced Power Management support is enabled.
++	AVR32	AVR32 architecture is enabled.
+ 	AX25	Appropriate AX.25 support is enabled.
+ 	BLACKFIN Blackfin architecture is enabled.
+ 	DRM	Direct Rendering Management support is enabled.
+@@ -1123,6 +1124,10 @@ and is between 256 and 4096 characters. 
+ 			of returning the full 64-bit number.
+ 			The default is to return 64-bit inode numbers.
+ 
++	nmi_debug=	[KNL,AVR32] Specify one or more actions to take
++			when a NMI is triggered.
++			Format: [state][,regs][,debounce][,die]
++
+ 	nmi_watchdog=	[KNL,BUGS=X86-32] Debugging features for SMP kernels
+ 
+ 	no387		[BUGS=X86-32] Tells the kernel to use the 387 maths
+diff -Nrup linux-2.6.24/drivers/i2c/busses/i2c-atmeltwi.c linux-avr32/drivers/i2c/busses/i2c-atmeltwi.c
+--- linux-2.6.24/drivers/i2c/busses/i2c-atmeltwi.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/drivers/i2c/busses/i2c-atmeltwi.c	2008-02-01 14:51:37.000000000 -0500
+@@ -0,0 +1,436 @@
++/*
++ * i2c Support for Atmel's Two-Wire Interface (TWI)
++ *
++ * Based on the work of Copyright (C) 2004 Rick Bronson
++ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
++ * Ported to AVR32 and heavily modified by Espen Krangnes
++ * <ekrangnes at atmel.com>
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * Borrowed heavily from the original work by:
++ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
++ *
++ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
++ * bugs removed, interrupt routine markedly rewritten
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++#undef VERBOSE_DEBUG
++
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/i2c.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/completion.h>
++#include <linux/io.h>
++
++#include "i2c-atmeltwi.h"
++
++static unsigned int baudrate = 100 * 1000;
++module_param(baudrate, uint, S_IRUGO);
++MODULE_PARM_DESC(baudrate, "The TWI baudrate");
++
++
++struct atmel_twi {
++	void __iomem *regs;
++	struct i2c_adapter adapter;
++	struct clk *pclk;
++	struct completion comp;
++	u32 mask;
++	u8 *buf;
++	u16 len;
++	u16 acks_left;
++	int status;
++	unsigned int irq;
++
++};
++#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
++
++/*
++ * (Re)Initialize the TWI hardware registers.
++ */
++static int twi_hwinit(struct atmel_twi *twi)
++{
++	unsigned long cdiv, ckdiv = 0;
++
++	/* REVISIT: wait till SCL is high before resetting; otherwise,
++	 * some versions will wedge forever.
++	 */
++
++	twi_writel(twi, IDR, ~0UL);
++	twi_writel(twi, CR, TWI_BIT(SWRST));	/*Reset peripheral*/
++	twi_readl(twi, SR);
++
++	cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
++
++	while (cdiv > 255) {
++		ckdiv++;
++		cdiv = cdiv >> 1;
++	}
++
++	/* REVISIT: there are various errata to consider re CDIV and CHDIV
++	 * here, at least on at91 parts.
++	 */
++
++	if (ckdiv > 7)
++		return -EINVAL;
++	else
++		twi_writel(twi, CWGR, TWI_BF(CKDIV, ckdiv)
++				| TWI_BF(CHDIV, cdiv)
++				| TWI_BF(CLDIV, cdiv));
++	return 0;
++}
++
++/*
++ * Waits for the i2c status register to set the specified bitmask
++ * Returns 0 if timed out ... ~100ms is much longer than the SMBus
++ * limit, but I2C has no limit at all.
++ */
++static int twi_complete(struct atmel_twi *twi, u32 mask)
++{
++	int timeout = msecs_to_jiffies(100);
++
++	mask |= TWI_BIT(TXCOMP);
++	twi->mask = mask | TWI_BIT(NACK) | TWI_BIT(OVRE);
++	init_completion(&twi->comp);
++
++	twi_writel(twi, IER, mask);
++
++	if (!wait_for_completion_timeout(&twi->comp, timeout)) {
++		/* RESET TWI interface */
++		twi_writel(twi, CR, TWI_BIT(SWRST));
++
++		/* Reinitialize TWI */
++		twi_hwinit(twi);
++
++		return -ETIMEDOUT;
++	}
++	return 0;
++}
++
++/*
++ * Generic i2c master transfer entrypoint.
++ */
++static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num)
++{
++	struct atmel_twi *twi = to_atmel_twi(adap);
++	int i;
++
++	dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
++
++	twi->status = 0;
++	for (i = 0; i < num; i++, pmsg++) {
++		twi->len = pmsg->len;
++		twi->buf = pmsg->buf;
++		twi->acks_left = pmsg->len;
++		twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
++			(pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
++		twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
++
++		dev_dbg(&adap->dev,
++			"#%d: %s %d byte%s %s dev 0x%02x\n",
++			i,
++			pmsg->flags & I2C_M_RD ? "reading" : "writing",
++			pmsg->len,
++			pmsg->len > 1 ? "s" : "",
++			pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
++
++		/* enable */
++		twi_writel(twi, CR, TWI_BIT(MSEN));
++
++		if (pmsg->flags & I2C_M_RD) {
++			/* cleanup after previous RX overruns */
++			while (twi_readl(twi, SR) & TWI_BIT(RXRDY))
++				twi_readl(twi, RHR);
++
++			if (twi->len == 1)
++				twi_writel(twi, CR,
++					TWI_BIT(START) | TWI_BIT(STOP));
++			else
++				twi_writel(twi, CR, TWI_BIT(START));
++
++			if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
++				dev_dbg(&adap->dev, "RX[%d] timeout. "
++					"Stopped with %d bytes left\n",
++					i, twi->acks_left);
++				return -ETIMEDOUT;
++			}
++		} else {
++			twi_writel(twi, THR, twi->buf[0]);
++			twi->acks_left--;
++			/* REVISIT: some chips don't start automagically:
++			 * twi_writel(twi, CR, TWI_BIT(START));
++			 */
++			if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
++				dev_dbg(&adap->dev, "TX[%d] timeout. "
++					"Stopped with %d bytes left\n",
++					i, twi->acks_left);
++				return -ETIMEDOUT;
++			}
++			/* REVISIT: an erratum workaround may be needed here;
++			 * see sam9261 "STOP not generated" (START either).
++			 */
++		}
++
++		/* Disable TWI interface */
++		twi_writel(twi, CR, TWI_BIT(MSDIS));
++
++		if (twi->status)
++			return twi->status;
++
++		/* WARNING:  This driver lies about properly supporting
++		 * repeated start, or it would *ALWAYS* return here.  It
++		 * has issued a STOP.  Continuing is a false claim -- that
++		 * a second (or third, etc.) message is part of the same
++		 * "combined" (no STOPs between parts) message.
++		 */
++
++	} /* end cur msg */
++
++	return i;
++}
++
++
++static irqreturn_t twi_interrupt(int irq, void *dev_id)
++{
++	struct atmel_twi *twi = dev_id;
++	int status = twi_readl(twi, SR);
++
++	/* Save state for later debug prints */
++	int old_status = status;
++
++	if (twi->mask & status) {
++
++		status &= twi->mask;
++
++		if (status & TWI_BIT(RXRDY)) {
++			if ((status & TWI_BIT(OVRE)) && twi->acks_left) {
++				/* Note weakness in fault reporting model:
++				 * we can't say "the first N of these data
++				 * bytes are valid".
++				 */
++				dev_err(&twi->adapter.dev,
++					"OVERRUN RX! %04x, lost %d\n",
++					old_status, twi->acks_left);
++				twi->acks_left = 0;
++				twi_writel(twi, CR, TWI_BIT(STOP));
++				twi->status = -EOVERFLOW;
++			} else if (twi->acks_left > 0) {
++				twi->buf[twi->len - twi->acks_left] =
++					twi_readl(twi, RHR);
++				twi->acks_left--;
++			}
++			if (status & TWI_BIT(TXCOMP))
++				goto done;
++			if (twi->acks_left == 1)
++				twi_writel(twi, CR, TWI_BIT(STOP));
++
++		} else if (status & (TWI_BIT(NACK) | TWI_BIT(TXCOMP))) {
++			goto done;
++
++		} else if (status & TWI_BIT(TXRDY)) {
++			if (twi->acks_left > 0) {
++				twi->acks_left--;
++				twi_writel(twi, THR,
++					twi->buf[twi->len - twi->acks_left]);
++			} else
++				twi_writel(twi, CR, TWI_BIT(STOP));
++		}
++
++		if (twi->acks_left == 0)
++			twi_writel(twi, IDR, ~TWI_BIT(TXCOMP));
++	}
++
++	/* enabling this message helps trigger overruns/underruns ... */
++	dev_vdbg(&twi->adapter.dev,
++		"ISR: SR 0x%04X, mask 0x%04X, acks %i\n",
++		old_status,
++		twi->acks_left ? twi->mask : TWI_BIT(TXCOMP),
++		twi->acks_left);
++
++	return IRQ_HANDLED;
++
++done:
++	/* Note weak fault reporting model:  we can't report how many
++	 * bytes we sent before the NAK, or let upper layers choose
++	 * whether to continue.  The I2C stack doesn't allow that...
++	 */
++	if (status & TWI_BIT(NACK)) {
++		dev_dbg(&twi->adapter.dev, "NACK received! %d to go\n",
++			twi->acks_left);
++		twi->status = -EPIPE;
++
++	/* TX underrun morphs automagically into a premature STOP;
++	 * we'll probably observe UVRE even when it's not documented.
++	 */
++	} else if (twi->acks_left && (twi->mask & TWI_BIT(TXRDY))) {
++		dev_err(&twi->adapter.dev, "UNDERRUN TX!  %04x, %d to go\n",
++			old_status, twi->acks_left);
++		twi->status = -ENOSR;
++	}
++
++	twi_writel(twi, IDR, ~0UL);
++	complete(&twi->comp);
++
++	dev_dbg(&twi->adapter.dev, "ISR: SR 0x%04X, acks %i --> %d\n",
++		old_status, twi->acks_left, twi->status);
++
++	return IRQ_HANDLED;
++}
++
++
++/*
++ * Return list of supported functionality.
++ *
++ * NOTE:  see warning above about repeated starts; this driver is falsely
++ * claiming to support "combined" transfers.  The mid-message STOPs mean
++ * some slaves will never work with this driver.  (Use i2c-gpio...)
++ */
++static u32 twi_func(struct i2c_adapter *adapter)
++{
++	return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL)
++		& ~I2C_FUNC_SMBUS_QUICK;
++}
++
++static struct i2c_algorithm twi_algorithm = {
++	.master_xfer	= twi_xfer,
++	.functionality	= twi_func,
++};
++
++/*
++ * Main initialization routine.
++ */
++static int __init twi_probe(struct platform_device *pdev)
++{
++	struct atmel_twi *twi;
++	struct resource *regs;
++	struct clk *pclk;
++	struct i2c_adapter *adapter;
++	int rc, irq;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs)
++		return -ENXIO;
++
++	pclk = clk_get(&pdev->dev, "twi_pclk");
++	if (IS_ERR(pclk))
++		return PTR_ERR(pclk);
++	clk_enable(pclk);
++
++	rc = -ENOMEM;
++	twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
++	if (!twi) {
++		dev_dbg(&pdev->dev, "can't allocate interface!\n");
++		goto err_alloc_twi;
++	}
++
++	twi->pclk = pclk;
++	twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!twi->regs)
++		goto err_ioremap;
++
++	irq = platform_get_irq(pdev, 0);
++	rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
++	if (rc) {
++		dev_dbg(&pdev->dev, "can't bind irq!\n");
++		goto err_irq;
++	}
++	twi->irq = irq;
++
++	rc = twi_hwinit(twi);
++	if (rc) {
++		dev_err(&pdev->dev, "Unable to set baudrate\n");
++		goto err_hw_init;
++	}
++
++	adapter = &twi->adapter;
++	sprintf(adapter->name, "TWI");
++	adapter->algo = &twi_algorithm;
++	adapter->class = I2C_CLASS_ALL;
++	adapter->nr = pdev->id;
++	adapter->dev.parent = &pdev->dev;
++
++	platform_set_drvdata(pdev, twi);
++
++	rc = i2c_add_numbered_adapter(adapter);
++	if (rc) {
++		dev_dbg(&pdev->dev, "Adapter %s registration failed\n",
++			adapter->name);
++		goto err_register;
++	}
++
++	dev_info(&pdev->dev,
++		"Atmel TWI/I2C adapter (baudrate %dk) at 0x%08lx.\n",
++		 baudrate/1000, (unsigned long)regs->start);
++
++	return 0;
++
++
++err_register:
++	platform_set_drvdata(pdev, NULL);
++
++err_hw_init:
++	free_irq(irq, twi);
++
++err_irq:
++	iounmap(twi->regs);
++
++err_ioremap:
++	kfree(twi);
++
++err_alloc_twi:
++	clk_disable(pclk);
++	clk_put(pclk);
++
++	return rc;
++}
++
++static int __exit twi_remove(struct platform_device *pdev)
++{
++	struct atmel_twi *twi = platform_get_drvdata(pdev);
++	int res;
++
++	platform_set_drvdata(pdev, NULL);
++	res = i2c_del_adapter(&twi->adapter);
++	twi_writel(twi, CR, TWI_BIT(MSDIS));
++	iounmap(twi->regs);
++	clk_disable(twi->pclk);
++	clk_put(twi->pclk);
++	free_irq(twi->irq, twi);
++	kfree(twi);
++
++	return res;
++}
++
++static struct platform_driver twi_driver = {
++	.remove		= __exit_p(twi_remove),
++	.driver		= {
++		.name	= "atmel_twi",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init atmel_twi_init(void)
++{
++	return platform_driver_probe(&twi_driver, twi_probe);
++}
++
++static void __exit atmel_twi_exit(void)
++{
++	platform_driver_unregister(&twi_driver);
++}
++
++module_init(atmel_twi_init);
++module_exit(atmel_twi_exit);
++
++MODULE_AUTHOR("Espen Krangnes");
++MODULE_DESCRIPTION("I2C driver for Atmel TWI");
++MODULE_LICENSE("GPL");
+diff -Nrup linux-2.6.24/drivers/i2c/busses/i2c-atmeltwi.h linux-avr32/drivers/i2c/busses/i2c-atmeltwi.h
+--- linux-2.6.24/drivers/i2c/busses/i2c-atmeltwi.h	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/drivers/i2c/busses/i2c-atmeltwi.h	2008-02-01 14:51:37.000000000 -0500
+@@ -0,0 +1,117 @@
++/*
++ * Register definitions for the Atmel Two-Wire Interface
++ */
++
++#ifndef __ATMELTWI_H__
++#define __ATMELTWI_H__
++
++/* TWI register offsets */
++#define TWI_CR					0x0000
++#define TWI_MMR					0x0004
++#define TWI_SMR					0x0008
++#define TWI_IADR				0x000c
++#define TWI_CWGR				0x0010
++#define TWI_SR					0x0020
++#define TWI_IER					0x0024
++#define TWI_IDR					0x0028
++#define TWI_IMR					0x002c
++#define TWI_RHR					0x0030
++#define TWI_THR					0x0034
++
++/* Bitfields in CR */
++#define TWI_START_OFFSET			0
++#define TWI_START_SIZE				1
++#define TWI_STOP_OFFSET				1
++#define TWI_STOP_SIZE				1
++#define TWI_MSEN_OFFSET				2
++#define TWI_MSEN_SIZE				1
++#define TWI_MSDIS_OFFSET			3
++#define TWI_MSDIS_SIZE				1
++#define TWI_SVEN_OFFSET				4
++#define TWI_SVEN_SIZE				1
++#define TWI_SVDIS_OFFSET			5
++#define TWI_SVDIS_SIZE				1
++#define TWI_SWRST_OFFSET			7
++#define TWI_SWRST_SIZE				1
++
++/* Bitfields in MMR */
++#define TWI_IADRSZ_OFFSET			8
++#define TWI_IADRSZ_SIZE				2
++#define TWI_MREAD_OFFSET			12
++#define TWI_MREAD_SIZE				1
++#define TWI_DADR_OFFSET				16
++#define TWI_DADR_SIZE				7
++
++/* Bitfields in SMR */
++#define TWI_SADR_OFFSET				16
++#define TWI_SADR_SIZE				7
++
++/* Bitfields in IADR */
++#define TWI_IADR_OFFSET				0
++#define TWI_IADR_SIZE				24
++
++/* Bitfields in CWGR */
++#define TWI_CLDIV_OFFSET			0
++#define TWI_CLDIV_SIZE				8
++#define TWI_CHDIV_OFFSET			8
++#define TWI_CHDIV_SIZE				8
++#define TWI_CKDIV_OFFSET			16
++#define TWI_CKDIV_SIZE				3
++
++/* Bitfields in SR */
++#define TWI_TXCOMP_OFFSET			0
++#define TWI_TXCOMP_SIZE				1
++#define TWI_RXRDY_OFFSET			1
++#define TWI_RXRDY_SIZE				1
++#define TWI_TXRDY_OFFSET			2
++#define TWI_TXRDY_SIZE				1
++#define TWI_SVDIR_OFFSET			3
++#define TWI_SVDIR_SIZE				1
++#define TWI_SVACC_OFFSET			4
++#define TWI_SVACC_SIZE				1
++#define TWI_GCACC_OFFSET			5
++#define TWI_GCACC_SIZE				1
++#define TWI_OVRE_OFFSET				6
++#define TWI_OVRE_SIZE				1
++#define TWI_UNRE_OFFSET				7
++#define TWI_UNRE_SIZE				1
++#define TWI_NACK_OFFSET				8
++#define TWI_NACK_SIZE				1
++#define TWI_ARBLST_OFFSET			9
++#define TWI_ARBLST_SIZE				1
++
++/* Bitfields in RHR */
++#define TWI_RXDATA_OFFSET			0
++#define TWI_RXDATA_SIZE				8
++
++/* Bitfields in THR */
++#define TWI_TXDATA_OFFSET			0
++#define TWI_TXDATA_SIZE				8
++
++/* Constants for IADRSZ */
++#define TWI_IADRSZ_NO_ADDR			0
++#define TWI_IADRSZ_ONE_BYTE			1
++#define TWI_IADRSZ_TWO_BYTES			2
++#define TWI_IADRSZ_THREE_BYTES			3
++
++/* Bit manipulation macros */
++#define TWI_BIT(name)					\
++	(1 << TWI_##name##_OFFSET)
++#define TWI_BF(name, value)				\
++	(((value) & ((1 << TWI_##name##_SIZE) - 1))	\
++	 << TWI_##name##_OFFSET)
++#define TWI_BFEXT(name, value)				\
++	(((value) >> TWI_##name##_OFFSET)		\
++	 & ((1 << TWI_##name##_SIZE) - 1))
++#define TWI_BFINS(name, value, old)			\
++	(((old) & ~(((1 << TWI_##name##_SIZE) - 1)	\
++		    << TWI_##name##_OFFSET))		\
++	 | TWI_BF(name, (value)))
++
++/* Register access macros */
++#define twi_readl(port, reg)				\
++	__raw_readl((port)->regs + TWI_##reg)
++#define twi_writel(port, reg, value)			\
++	__raw_writel((value), (port)->regs + TWI_##reg)
++
++#endif /* __ATMELTWI_H__ */
+diff -Nrup linux-2.6.24/drivers/i2c/busses/Kconfig linux-avr32/drivers/i2c/busses/Kconfig
+--- linux-2.6.24/drivers/i2c/busses/Kconfig	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/i2c/busses/Kconfig	2008-02-01 14:51:37.000000000 -0500
+@@ -88,6 +88,14 @@ config I2C_AT91
+ 	  to support combined I2C messages.  Use the i2c-gpio driver
+ 	  unless your system can cope with those limitations.
+ 
++config I2C_ATMELTWI
++	tristate "Atmel Two-Wire Interface (TWI)"
++	depends on I2C && (ARCH_AT91 || PLATFORM_AT32AP)
++	help
++	  Atmel on-chip TWI controller. Say Y if you have an AT32 or
++	  AT91-based device and want to use its built-in TWI
++	  functionality.
++
+ config I2C_AU1550
+ 	tristate "Au1550/Au1200 SMBus interface"
+ 	depends on SOC_AU1550 || SOC_AU1200
+diff -Nrup linux-2.6.24/drivers/i2c/busses/Makefile linux-avr32/drivers/i2c/busses/Makefile
+--- linux-2.6.24/drivers/i2c/busses/Makefile	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/i2c/busses/Makefile	2008-02-01 14:51:37.000000000 -0500
+@@ -53,6 +53,7 @@ obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
+ obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
+ obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
++obj-$(CONFIG_I2C_ATMELTWI)	+= i2c-atmeltwi.o
+ 
+ ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+ EXTRA_CFLAGS += -DDEBUG
+diff -Nrup linux-2.6.24/drivers/leds/Kconfig linux-avr32/drivers/leds/Kconfig
+--- linux-2.6.24/drivers/leds/Kconfig	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/leds/Kconfig	2008-02-01 14:51:38.000000000 -0500
+@@ -18,6 +18,13 @@ config LEDS_CLASS
+ 
+ comment "LED drivers"
+ 
++config LEDS_ATMEL_PWM
++	tristate "LED Support using Atmel PWM outputs"
++	depends on LEDS_CLASS && ATMEL_PWM
++	help
++	  This option enables support for LEDs driven using outputs
++	  of the dedicated PWM controller found on newer Atmel SOCs.
++
+ config LEDS_CORGI
+ 	tristate "LED Support for the Sharp SL-C7x0 series"
+ 	depends on LEDS_CLASS && PXA_SHARP_C7xx
+diff -Nrup linux-2.6.24/drivers/leds/leds-atmel-pwm.c linux-avr32/drivers/leds/leds-atmel-pwm.c
+--- linux-2.6.24/drivers/leds/leds-atmel-pwm.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/drivers/leds/leds-atmel-pwm.c	2008-02-01 14:51:38.000000000 -0500
+@@ -0,0 +1,157 @@
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/io.h>
++#include <linux/atmel_pwm.h>
++
++
++struct pwmled {
++	struct led_classdev	cdev;
++	struct pwm_channel	pwmc;
++	struct gpio_led		*desc;
++	u32			mult;
++	u8			active_low;
++};
++
++
++/*
++ * For simplicity, we use "brightness" as if it were a linear function
++ * of PWM duty cycle.  However, a logarithmic function of duty cycle is
++ * probably a better match for perceived brightness: two is half as bright
++ * as four, four is half as bright as eight, etc
++ */
++static void pwmled_brightness(struct led_classdev *cdev, enum led_brightness b)
++{
++	struct pwmled		 *led;
++
++	/* update the duty cycle for the *next* period */
++	led = container_of(cdev, struct pwmled, cdev);
++	pwm_channel_writel(&led->pwmc, PWM_CUPD, led->mult * (unsigned) b);
++}
++
++/*
++ * NOTE:  we reuse the platform_data structure of GPIO leds,
++ * but repurpose its "gpio" number as a PWM channel number.
++ */
++static int __init pwmled_probe(struct platform_device *pdev)
++{
++	const struct gpio_led_platform_data	*pdata;
++	struct pwmled				*leds;
++	unsigned				i;
++	int					status;
++
++	pdata = pdev->dev.platform_data;
++	if (!pdata || pdata->num_leds < 1)
++		return -ENODEV;
++
++	leds = kcalloc(pdata->num_leds, sizeof(*leds), GFP_KERNEL);
++	if (!leds)
++		return -ENOMEM;
++
++	for (i = 0; i < pdata->num_leds; i++) {
++		struct pwmled		*led = leds + i;
++		const struct gpio_led	*dat = pdata->leds + i;
++		u32			tmp;
++
++		led->cdev.name = dat->name;
++		led->cdev.brightness = LED_OFF;
++		led->cdev.brightness_set = pwmled_brightness;
++		led->cdev.default_trigger = dat->default_trigger;
++
++		led->active_low = dat->active_low;
++
++		status = pwm_channel_alloc(dat->gpio, &led->pwmc);
++		if (status < 0)
++			goto err;
++
++		/*
++		 * Prescale clock by 2^x, so PWM counts in low MHz.
++		 * Start each cycle with the LED active, so increasing
++		 * the duty cycle gives us more time on (== brighter).
++		 */
++		tmp = 5;
++		if (!led->active_low)
++			tmp |= PWM_CPR_CPOL;
++		pwm_channel_writel(&led->pwmc, PWM_CMR, tmp);
++
++		/*
++		 * Pick a period so PWM cycles at 100+ Hz; and a multiplier
++		 * for scaling duty cycle:  brightness * mult.
++		 */
++		tmp = (led->pwmc.mck / (1 << 5)) / 100;
++		tmp /= 255;
++		led->mult = tmp;
++		pwm_channel_writel(&led->pwmc, PWM_CDTY,
++				led->cdev.brightness * 255);
++		pwm_channel_writel(&led->pwmc, PWM_CPRD,
++				LED_FULL * tmp);
++
++		pwm_channel_enable(&led->pwmc);
++
++		/* Hand it over to the LED framework */
++		status = led_classdev_register(&pdev->dev, &led->cdev);
++		if (status < 0) {
++			pwm_channel_free(&led->pwmc);
++			goto err;
++		}
++	}
++
++	platform_set_drvdata(pdev, leds);
++	return 0;
++
++err:
++	if (i > 0) {
++		for (i = i - 1; i >= 0; i--) {
++			led_classdev_unregister(&leds[i].cdev);
++			pwm_channel_free(&leds[i].pwmc);
++		}
++	}
++	kfree(leds);
++
++	return status;
++}
++
++static int __exit pwmled_remove(struct platform_device *pdev)
++{
++	const struct gpio_led_platform_data	*pdata;
++	struct pwmled				*leds;
++	unsigned				i;
++
++	pdata = pdev->dev.platform_data;
++	leds = platform_get_drvdata(pdev);
++
++	for (i = 0; i < pdata->num_leds; i++) {
++		struct pwmled		*led = leds + i;
++
++		led_classdev_unregister(&led->cdev);
++		pwm_channel_free(&led->pwmc);
++	}
++
++	kfree(leds);
++	platform_set_drvdata(pdev, NULL);
++	return 0;
++}
++
++static struct platform_driver pwmled_driver = {
++	.driver = {
++		.name =		"leds-atmel-pwm",
++		.owner =	THIS_MODULE,
++	},
++	/* REVISIT add suspend() and resume() methods */
++	.remove =	__exit_p(pwmled_remove),
++};
++
++static int __init modinit(void)
++{
++	return platform_driver_probe(&pwmled_driver, pwmled_probe);
++}
++module_init(modinit);
++
++static void __exit modexit(void)
++{
++	platform_driver_unregister(&pwmled_driver);
++}
++module_exit(modexit);
++
++MODULE_DESCRIPTION("Driver for LEDs with PWM-controlled brightness");
++MODULE_LICENSE("GPL");
+diff -Nrup linux-2.6.24/drivers/leds/Makefile linux-avr32/drivers/leds/Makefile
+--- linux-2.6.24/drivers/leds/Makefile	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/leds/Makefile	2008-02-01 14:51:38.000000000 -0500
+@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_CLASS)		+= led-class.o
+ obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
+ 
+ # LED Platform Drivers
++obj-$(CONFIG_LEDS_ATMEL_PWM)		+= leds-atmel-pwm.o
+ obj-$(CONFIG_LEDS_CORGI)		+= leds-corgi.o
+ obj-$(CONFIG_LEDS_LOCOMO)		+= leds-locomo.o
+ obj-$(CONFIG_LEDS_SPITZ)		+= leds-spitz.o
+diff -Nrup linux-2.6.24/drivers/misc/atmel_pwm.c linux-avr32/drivers/misc/atmel_pwm.c
+--- linux-2.6.24/drivers/misc/atmel_pwm.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/drivers/misc/atmel_pwm.c	2008-02-01 14:51:39.000000000 -0500
+@@ -0,0 +1,409 @@
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/atmel_pwm.h>
++
++
++/*
++ * This is a simple driver for the PWM controller found in various newer
++ * Atmel SOCs, including the AVR32 series and the AT91sam9263.
++ *
++ * Chips with current Linux ports have only 4 PWM channels, out of max 32.
++ * AT32UC3A and AT32UC3B chips have 7 channels (but currently no Linux).
++ * Docs are inconsistent about the width of the channel counter registers;
++ * it's at least 16 bits, but several places say 20 bits.
++ */
++#define	PWM_NCHAN	4		/* max 32 */
++
++struct pwm {
++	spinlock_t		lock;
++	struct platform_device	*pdev;
++	u32			mask;
++	int			irq;
++	void __iomem		*base;
++	struct clk		*clk;
++	struct pwm_channel	*channel[PWM_NCHAN];
++	void			(*handler[PWM_NCHAN])(struct pwm_channel *);
++};
++
++
++/* global PWM controller registers */
++#define PWM_MR		0x00
++#define PWM_ENA		0x04
++#define PWM_DIS		0x08
++#define PWM_SR		0x0c
++#define PWM_IER		0x10
++#define PWM_IDR		0x14
++#define PWM_IMR		0x18
++#define PWM_ISR		0x1c
++
++static inline void pwm_writel(const struct pwm *p, unsigned offset, u32 val)
++{
++	__raw_writel(val, p->base + offset);
++}
++
++static inline u32 pwm_readl(const struct pwm *p, unsigned offset)
++{
++	return __raw_readl(p->base + offset);
++}
++
++static inline void __iomem *pwmc_regs(const struct pwm *p, int index)
++{
++	return p->base + 0x200 + index * 0x20;
++}
++
++static struct pwm *pwm;
++
++static void pwm_dumpregs(struct pwm_channel *ch, char *tag)
++{
++	struct device	*dev = &pwm->pdev->dev;
++
++	dev_dbg(dev, "%s: mr %08x, sr %08x, imr %08x\n",
++		tag,
++		pwm_readl(pwm, PWM_MR),
++		pwm_readl(pwm, PWM_SR),
++		pwm_readl(pwm, PWM_IMR));
++	dev_dbg(dev,
++		"pwm ch%d - mr %08x, dty %u, prd %u, cnt %u\n",
++		ch->index,
++		pwm_channel_readl(ch, PWM_CMR),
++		pwm_channel_readl(ch, PWM_CDTY),
++		pwm_channel_readl(ch, PWM_CPRD),
++		pwm_channel_readl(ch, PWM_CCNT));
++}
++
++
++/**
++ * pwm_channel_alloc - allocate an unused PWM channel
++ * @index: identifies the channel
++ * @ch: structure to be initialized
++ *
++ * Drivers allocate PWM channels according to the board's wiring, and
++ * matching board-specific setup code.  Returns zero or negative errno.
++ */
++int pwm_channel_alloc(int index, struct pwm_channel *ch)
++{
++	unsigned long	flags;
++	int		status = 0;
++
++	/* insist on PWM init, with this signal pinned out */
++	if (!pwm || !(pwm->mask & 1 << index))
++		return -ENODEV;
++
++	if (index < 0 || index >= PWM_NCHAN || !ch)
++		return -EINVAL;
++	memset(ch, 0, sizeof *ch);
++
++	spin_lock_irqsave(&pwm->lock, flags);
++	if (pwm->channel[index])
++		status = -EBUSY;
++	else {
++		clk_enable(pwm->clk);
++
++		ch->regs = pwmc_regs(pwm, index);
++		ch->index = index;
++
++		/* REVISIT: ap7000 seems to go 2x as fast as we expect!! */
++		ch->mck = clk_get_rate(pwm->clk);
++
++		pwm->channel[index] = ch;
++		pwm->handler[index] = NULL;
++
++		/* channel and irq are always disabled when we return */
++		pwm_writel(pwm, PWM_DIS, 1 << index);
++		pwm_writel(pwm, PWM_IDR, 1 << index);
++	}
++	spin_unlock_irqrestore(&pwm->lock, flags);
++	return status;
++}
++EXPORT_SYMBOL(pwm_channel_alloc);
++
++static int pwmcheck(struct pwm_channel *ch)
++{
++	int		index;
++
++	if (!pwm)
++		return -ENODEV;
++	if (!ch)
++		return -EINVAL;
++	index = ch->index;
++	if (index < 0 || index >= PWM_NCHAN || pwm->channel[index] != ch)
++		return -EINVAL;
++
++	return index;
++}
++
++/**
++ * pwm_channel_free - release a previously allocated channel
++ * @ch: the channel being released
++ *
++ * The channel is completely shut down (counter and IRQ disabled),
++ * and made available for re-use.  Returns zero, or negative errno.
++ */
++int pwm_channel_free(struct pwm_channel *ch)
++{
++	unsigned long	flags;
++	int		t;
++
++	spin_lock_irqsave(&pwm->lock, flags);
++	t = pwmcheck(ch);
++	if (t >= 0) {
++		pwm->channel[t] = NULL;
++		pwm->handler[t] = NULL;
++
++		/* channel and irq are always disabled when we return */
++		pwm_writel(pwm, PWM_DIS, 1 << t);
++		pwm_writel(pwm, PWM_IDR, 1 << t);
++
++		clk_disable(pwm->clk);
++		t = 0;
++	}
++	spin_unlock_irqrestore(&pwm->lock, flags);
++	return t;
++}
++EXPORT_SYMBOL(pwm_channel_free);
++
++int __pwm_channel_onoff(struct pwm_channel *ch, int enabled)
++{
++	unsigned long	flags;
++	int		t;
++
++	/* OMITTED FUNCTIONALITY:  starting several channels in synch */
++
++	spin_lock_irqsave(&pwm->lock, flags);
++	t = pwmcheck(ch);
++	if (t >= 0) {
++		pwm_writel(pwm, enabled ? PWM_ENA : PWM_DIS, 1 << t);
++		t = 0;
++		pwm_dumpregs(ch, enabled ? "enable" : "disable");
++	}
++	spin_unlock_irqrestore(&pwm->lock, flags);
++
++	return t;
++}
++EXPORT_SYMBOL(__pwm_channel_onoff);
++
++/**
++ * pwm_clk_alloc - allocate and configure CLKA or CLKB
++ * @prescale: from 0..10, the power of two used to divide MCK
++ * @div: from 1..255, the linear divisor to use
++ *
++ * Returns PWM_CPR_CLKA, PWM_CPR_CLKB, or negative errno.  The allocated
++ * clock will run with a period of (2^prescale * div) / MCK, or twice as
++ * long if center aligned PWM output is used.  The clock must later be
++ * deconfigured using pwm_clk_free().
++ */
++int pwm_clk_alloc(unsigned prescale, unsigned div)
++{
++	unsigned long	flags;
++	u32		mr;
++	u32		val = (prescale << 8) | div;
++	int		ret = -EBUSY;
++
++	if (prescale >= 10 || div == 0 || div > 255)
++		return -EINVAL;
++
++	spin_lock_irqsave(&pwm->lock, flags);
++	mr = pwm_readl(pwm, PWM_MR);
++	if ((mr & 0xffff) == 0) {
++		mr |= val;
++		ret = PWM_CPR_CLKA;
++	}
++	if ((mr & (0xffff << 16)) == 0) {
++		mr |= val << 16;
++		ret = PWM_CPR_CLKB;
++	}
++	if (ret > 0)
++		pwm_writel(pwm, PWM_MR, mr);
++	spin_unlock_irqrestore(&pwm->lock, flags);
++	return ret;
++}
++EXPORT_SYMBOL(pwm_clk_alloc);
++
++/**
++ * pwm_clk_free - deconfigure and release CLKA or CLKB
++ *
++ * Reverses the effect of pwm_clk_alloc().
++ */
++void pwm_clk_free(unsigned clk)
++{
++	unsigned long	flags;
++	u32		mr;
++
++	spin_lock_irqsave(&pwm->lock, flags);
++	mr = pwm_readl(pwm, PWM_MR);
++	if (clk == PWM_CPR_CLKA)
++		pwm_writel(pwm, PWM_MR, mr & ~(0xffff << 0));
++	if (clk == PWM_CPR_CLKB)
++		pwm_writel(pwm, PWM_MR, mr & ~(0xffff << 16));
++	spin_unlock_irqrestore(&pwm->lock, flags);
++}
++EXPORT_SYMBOL(pwm_clk_free);
++
++/**
++ * pwm_channel_handler - manage channel's IRQ handler
++ * @ch: the channel
++ * @handler: the handler to use, possibly NULL
++ *
++ * If the handler is non-null, the handler will be called after every
++ * period of this PWM channel.  If the handler is null, this channel
++ * won't generate an IRQ.
++ */
++int pwm_channel_handler(struct pwm_channel *ch,
++		void (*handler)(struct pwm_channel *ch))
++{
++	unsigned long	flags;
++	int		t;
++
++	spin_lock_irqsave(&pwm->lock, flags);
++	t = pwmcheck(ch);
++	if (t >= 0) {
++		pwm->handler[t] = handler;
++		pwm_writel(pwm, handler ? PWM_IER : PWM_IDR, 1 << t);
++		t = 0;
++	}
++	spin_unlock_irqrestore(&pwm->lock, flags);
++
++	return t;
++}
++EXPORT_SYMBOL(pwm_channel_handler);
++
++static irqreturn_t pwm_irq(int id, void *_pwm)
++{
++	struct pwm	*p = _pwm;
++	irqreturn_t	handled = IRQ_NONE;
++	u32		irqstat;
++	int		index;
++
++	spin_lock(&p->lock);
++
++	/* ack irqs, then handle them */
++	irqstat = pwm_readl(pwm, PWM_ISR);
++
++	while (irqstat) {
++		struct pwm_channel *ch;
++		void (*handler)(struct pwm_channel *ch);
++
++		index = ffs(irqstat) - 1;
++		irqstat &= ~(1 << index);
++		ch = pwm->channel[index];
++		handler = pwm->handler[index];
++		if (handler && ch) {
++			spin_unlock(&p->lock);
++			handler(ch);
++			spin_lock(&p->lock);
++			handled = IRQ_HANDLED;
++		}
++	}
++
++	spin_unlock(&p->lock);
++	return handled;
++}
++
++static int __init pwm_probe(struct platform_device *pdev)
++{
++	struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	int irq = platform_get_irq(pdev, 0);
++	u32 *mp = pdev->dev.platform_data;
++	struct pwm *p;
++	int status = -EIO;
++
++	if (pwm)
++		return -EBUSY;
++	if (!r || irq < 0 || !mp || !*mp)
++		return -ENODEV;
++	if (*mp & ~((1<<PWM_NCHAN)-1)) {
++		dev_warn(&pdev->dev, "mask 0x%x ... more than %d channels\n",
++			*mp, PWM_NCHAN);
++		return -EINVAL;
++	}
++
++	p = kzalloc(sizeof(*p), GFP_KERNEL);
++	if (!p)
++		return -ENOMEM;
++
++	spin_lock_init(&p->lock);
++	p->pdev = pdev;
++	p->mask = *mp;
++	p->irq = irq;
++	p->base = ioremap(r->start, r->end - r->start + 1);
++	if (!p->base)
++		goto fail;
++	p->clk = clk_get(&pdev->dev, "mck");
++	if (IS_ERR(p->clk)) {
++		status = PTR_ERR(p->clk);
++		p->clk = NULL;
++		goto fail;
++	}
++
++	status = request_irq(irq, pwm_irq, 0, pdev->name, p);
++	if (status < 0)
++		goto fail;
++
++	pwm = p;
++	platform_set_drvdata(pdev, p);
++
++	return 0;
++
++fail:
++	if (p->clk)
++		clk_put(p->clk);
++	if (p->base)
++		iounmap(p->base);
++
++	kfree(p);
++	return status;
++}
++
++static int __exit pwm_remove(struct platform_device *pdev)
++{
++	struct pwm *p = platform_get_drvdata(pdev);
++
++	if (p != pwm)
++		return -EINVAL;
++
++	clk_enable(pwm->clk);
++	pwm_writel(pwm, PWM_DIS, (1 << PWM_NCHAN) - 1);
++	pwm_writel(pwm, PWM_IDR, (1 << PWM_NCHAN) - 1);
++	clk_disable(pwm->clk);
++
++	pwm = NULL;
++
++	free_irq(p->irq, p);
++	clk_put(p->clk);
++	iounmap(p->base);
++	kfree(p);
++
++	return 0;
++}
++
++static struct platform_driver atmel_pwm_driver = {
++	.driver = {
++		.name = "atmel_pwm",
++		.owner = THIS_MODULE,
++	},
++	.remove = __exit_p(pwm_remove),
++
++	/* NOTE: PWM can keep running in AVR32 "idle" and "frozen" states;
++	 * and all AT91sam9263 states, albeit at reduced clock rate if
++	 * MCK becomes the slow clock (i.e. what Linux labels STR).
++	 */
++};
++
++static int __init pwm_init(void)
++{
++	return platform_driver_probe(&atmel_pwm_driver, pwm_probe);
++}
++module_init(pwm_init);
++
++static void __exit pwm_exit(void)
++{
++	platform_driver_unregister(&atmel_pwm_driver);
++}
++module_exit(pwm_exit);
++
++MODULE_DESCRIPTION("Driver for AT32/AT91 PWM module");
++MODULE_LICENSE("GPL");
+diff -Nrup linux-2.6.24/drivers/misc/Kconfig linux-avr32/drivers/misc/Kconfig
+--- linux-2.6.24/drivers/misc/Kconfig	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/misc/Kconfig	2008-02-01 14:51:39.000000000 -0500
+@@ -13,6 +13,15 @@ menuconfig MISC_DEVICES
+ 
+ if MISC_DEVICES
+ 
++config ATMEL_PWM
++	tristate "Atmel AT32/AT91 PWM support"
++	depends on (AVR32 || AT91) && EXPERIMENTAL
++	help
++	  This option enables device driver support for the PWM channels
++	  on certain Atmel prcoessors.  Pulse Width Modulation is used for
++	  purposes including software controlled power-efficent backlights
++	  on LCD displays, motor control, and waveform generation.
++
+ config IBM_ASM
+ 	tristate "Device driver for IBM RSA service processor"
+ 	depends on X86 && PCI && INPUT && EXPERIMENTAL
+diff -Nrup linux-2.6.24/drivers/misc/Makefile linux-avr32/drivers/misc/Makefile
+--- linux-2.6.24/drivers/misc/Makefile	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/misc/Makefile	2008-02-01 14:51:39.000000000 -0500
+@@ -7,6 +7,7 @@ obj-$(CONFIG_IBM_ASM)		+= ibmasm/
+ obj-$(CONFIG_HDPU_FEATURES)	+= hdpuftrs/
+ obj-$(CONFIG_MSI_LAPTOP)     += msi-laptop.o
+ obj-$(CONFIG_ASUS_LAPTOP)     += asus-laptop.o
++obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
+ obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
+ obj-$(CONFIG_LKDTM)		+= lkdtm.o
+ obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
+diff -Nrup linux-2.6.24/drivers/mmc/host/atmel-mci.c linux-avr32/drivers/mmc/host/atmel-mci.c
+--- linux-2.6.24/drivers/mmc/host/atmel-mci.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/drivers/mmc/host/atmel-mci.c	2008-02-01 14:51:39.000000000 -0500
+@@ -0,0 +1,1176 @@
++/*
++ * Atmel MultiMedia Card Interface driver
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/blkdev.h>
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/ioport.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <linux/mmc/host.h>
++
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++#include "atmel-mci.h"
++
++#define DRIVER_NAME "atmel_mci"
++
++#define MCI_DATA_ERROR_FLAGS	(MCI_BIT(DCRCE) | MCI_BIT(DTOE) |	\
++				 MCI_BIT(OVRE) | MCI_BIT(UNRE))
++
++enum {
++	EVENT_CMD_COMPLETE = 0,
++	EVENT_DATA_COMPLETE,
++	EVENT_DATA_ERROR,
++	EVENT_STOP_SENT,
++	EVENT_STOP_COMPLETE,
++	EVENT_DMA_COMPLETE,
++	EVENT_DMA_ERROR,
++	EVENT_CARD_DETECT,
++};
++
++struct atmel_mci_dma {
++	struct dma_request_sg	req;
++	unsigned short		rx_periph_id;
++	unsigned short		tx_periph_id;
++};
++
++struct atmel_mci {
++	struct mmc_host		*mmc;
++	void __iomem		*regs;
++	struct atmel_mci_dma	dma;
++
++	struct mmc_request	*mrq;
++	struct mmc_command	*cmd;
++	struct mmc_data		*data;
++
++	u32			cmd_status;
++	u32			data_status;
++	u32			stop_status;
++	u32			stop_cmdr;
++
++	struct tasklet_struct	tasklet;
++	unsigned long		pending_events;
++	unsigned long		completed_events;
++
++	int			present;
++	int			detect_pin;
++	int			wp_pin;
++
++	unsigned long		bus_hz;
++	unsigned long		mapbase;
++	struct clk		*mck;
++	struct platform_device	*pdev;
++
++#ifdef CONFIG_DEBUG_FS
++	struct dentry		*debugfs_root;
++	struct dentry		*debugfs_regs;
++	struct dentry		*debugfs_req;
++	struct dentry		*debugfs_pending_events;
++	struct dentry		*debugfs_completed_events;
++#endif
++};
++
++/* Those printks take an awful lot of time... */
++#ifndef DEBUG
++static unsigned int fmax = 15000000U;
++#else
++static unsigned int fmax = 1000000U;
++#endif
++module_param(fmax, uint, 0444);
++MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
++
++/* Test bit macros for completed events */
++#define mci_cmd_is_complete(host)			\
++	test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_data_is_complete(host)			\
++	test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_data_error_is_complete(host)		\
++	test_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_stop_sent_is_complete(host)			\
++	test_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_stop_is_complete(host)			\
++	test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_dma_is_complete(host)			\
++	test_bit(EVENT_DMA_COMPLETE, &host->completed_events)
++#define mci_dma_error_is_complete(host)			\
++	test_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_card_detect_is_complete(host)			\
++	test_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Test and clear bit macros for pending events */
++#define mci_clear_cmd_is_pending(host)			\
++	test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_clear_data_is_pending(host)			\
++	test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_clear_data_error_is_pending(host)		\
++	test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_clear_stop_sent_is_pending(host)		\
++	test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_clear_stop_is_pending(host)			\
++	test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_clear_dma_error_is_pending(host)		\
++	test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_clear_card_detect_is_pending(host)		\
++	test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++/* Test and set bit macros for completed events */
++#define mci_set_cmd_is_completed(host)			\
++	test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_set_data_is_completed(host)			\
++	test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_set_data_error_is_completed(host)		\
++	test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_set_stop_sent_is_completed(host)		\
++	test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_set_stop_is_completed(host)			\
++	test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_dma_error_is_completed(host)		\
++	test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_set_card_detect_is_completed(host)		\
++	test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Set bit macros for completed events */
++#define mci_set_cmd_complete(host)			\
++	set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_set_data_complete(host)			\
++	set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_set_data_error_complete(host)		\
++	set_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_set_stop_sent_complete(host)		\
++	set_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_set_stop_complete(host)			\
++	set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_dma_complete(host)			\
++	set_bit(EVENT_DMA_COMPLETE, &host->completed_events)
++#define mci_set_dma_error_complete(host)		\
++	set_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_set_card_detect_complete(host)		\
++	set_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Set bit macros for pending events */
++#define mci_set_cmd_pending(host)			\
++	set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_set_data_pending(host)			\
++	set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_set_data_error_pending(host)		\
++	set_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_set_stop_sent_pending(host)			\
++	set_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_set_stop_pending(host)			\
++	set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_set_dma_error_pending(host)			\
++	set_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_set_card_detect_pending(host)		\
++	set_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++/* Clear bit macros for pending events */
++#define mci_clear_cmd_pending(host)			\
++	clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_clear_data_pending(host)			\
++	clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_clear_data_error_pending(host)		\
++	clear_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_clear_stop_sent_pending(host)		\
++	clear_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_clear_stop_pending(host)			\
++	clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_clear_dma_error_pending(host)		\
++	clear_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_clear_card_detect_pending(host)		\
++	clear_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++
++#ifdef CONFIG_DEBUG_FS
++#include <linux/debugfs.h>
++
++#define DBG_REQ_BUF_SIZE	(4096 - sizeof(unsigned int))
++
++struct req_dbg_data {
++	unsigned int nbytes;
++	char str[DBG_REQ_BUF_SIZE];
++};
++
++static int req_dbg_open(struct inode *inode, struct file *file)
++{
++	struct atmel_mci *host;
++	struct mmc_request *mrq;
++	struct mmc_command *cmd, *stop;
++	struct mmc_data *data;
++	struct req_dbg_data *priv;
++	char *str;
++	unsigned long n = 0;
++
++	priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
++	if (!priv)
++		return -ENOMEM;
++	str = priv->str;
++
++	mutex_lock(&inode->i_mutex);
++	host = inode->i_private;
++
++	spin_lock_irq(&host->mmc->lock);
++	mrq = host->mrq;
++	if (mrq) {
++		cmd = mrq->cmd;
++		data = mrq->data;
++		stop = mrq->stop;
++		n = snprintf(str, DBG_REQ_BUF_SIZE,
++			     "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
++			     cmd->opcode, cmd->arg, cmd->flags,
++			     cmd->resp[0], cmd->resp[1], cmd->resp[2],
++			     cmd->resp[3], cmd->error);
++		if (n < DBG_REQ_BUF_SIZE && data)
++			n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
++				      "DATA %u * %u (%u) %x (err %u)\n",
++				      data->blocks, data->blksz,
++				      data->bytes_xfered, data->flags,
++				      data->error);
++		if (n < DBG_REQ_BUF_SIZE && stop)
++			n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
++				      "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
++				      stop->opcode, stop->arg, stop->flags,
++				      stop->resp[0], stop->resp[1],
++				      stop->resp[2], stop->resp[3],
++				      stop->error);
++	}
++	spin_unlock_irq(&host->mmc->lock);
++	mutex_unlock(&inode->i_mutex);
++
++	priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
++	file->private_data = priv;
++
++	return 0;
++}
++
++static ssize_t req_dbg_read(struct file *file, char __user *buf,
++			    size_t nbytes, loff_t *ppos)
++{
++	struct req_dbg_data *priv = file->private_data;
++
++	return simple_read_from_buffer(buf, nbytes, ppos,
++				       priv->str, priv->nbytes);
++}
++
++static int req_dbg_release(struct inode *inode, struct file *file)
++{
++	kfree(file->private_data);
++	return 0;
++}
++
++static const struct file_operations req_dbg_fops = {
++	.owner		= THIS_MODULE,
++	.open		= req_dbg_open,
++	.llseek		= no_llseek,
++	.read		= req_dbg_read,
++	.release	= req_dbg_release,
++};
++
++static int regs_dbg_open(struct inode *inode, struct file *file)
++{
++	struct atmel_mci *host;
++	unsigned int i;
++	u32 *data;
++	int ret = -ENOMEM;
++
++	mutex_lock(&inode->i_mutex);
++	host = inode->i_private;
++	data = kmalloc(inode->i_size, GFP_KERNEL);
++	if (!data)
++		goto out;
++
++	spin_lock_irq(&host->mmc->lock);
++	for (i = 0; i < inode->i_size / 4; i++)
++		data[i] = __raw_readl(host->regs + i * 4);
++	spin_unlock_irq(&host->mmc->lock);
++
++	file->private_data = data;
++	ret = 0;
++
++out:
++	mutex_unlock(&inode->i_mutex);
++
++	return ret;
++}
++
++static ssize_t regs_dbg_read(struct file *file, char __user *buf,
++			     size_t nbytes, loff_t *ppos)
++{
++	struct inode *inode = file->f_dentry->d_inode;
++	int ret;
++
++	mutex_lock(&inode->i_mutex);
++	ret = simple_read_from_buffer(buf, nbytes, ppos,
++				      file->private_data,
++				      file->f_dentry->d_inode->i_size);
++	mutex_unlock(&inode->i_mutex);
++
++	return ret;
++}
++
++static int regs_dbg_release(struct inode *inode, struct file *file)
++{
++	kfree(file->private_data);
++	return 0;
++}
++
++static const struct file_operations regs_dbg_fops = {
++	.owner		= THIS_MODULE,
++	.open		= regs_dbg_open,
++	.llseek		= generic_file_llseek,
++	.read		= regs_dbg_read,
++	.release	= regs_dbg_release,
++};
++
++static void atmci_init_debugfs(struct atmel_mci *host)
++{
++	struct mmc_host *mmc;
++	struct dentry *root, *regs;
++	struct resource *res;
++
++	mmc = host->mmc;
++	root = debugfs_create_dir(mmc_hostname(mmc), NULL);
++	if (IS_ERR(root) || !root)
++		goto err_root;
++	host->debugfs_root = root;
++
++	regs = debugfs_create_file("regs", 0400, root, host, &regs_dbg_fops);
++	if (!regs)
++		goto err_regs;
++
++	res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
++	regs->d_inode->i_size = res->end - res->start + 1;
++	host->debugfs_regs = regs;
++
++	host->debugfs_req = debugfs_create_file("req", 0400, root,
++						host, &req_dbg_fops);
++	if (!host->debugfs_req)
++		goto err_req;
++
++	host->debugfs_pending_events
++		= debugfs_create_u32("pending_events", 0400, root,
++				     (u32 *)&host->pending_events);
++	if (!host->debugfs_pending_events)
++		goto err_pending_events;
++
++	host->debugfs_completed_events
++		= debugfs_create_u32("completed_events", 0400, root,
++				     (u32 *)&host->completed_events);
++	if (!host->debugfs_completed_events)
++		goto err_completed_events;
++
++	return;
++
++err_completed_events:
++	debugfs_remove(host->debugfs_pending_events);
++err_pending_events:
++	debugfs_remove(host->debugfs_req);
++err_req:
++	debugfs_remove(host->debugfs_regs);
++err_regs:
++	debugfs_remove(host->debugfs_root);
++err_root:
++	host->debugfs_root = NULL;
++	dev_err(&host->pdev->dev,
++		"failed to initialize debugfs for %s\n",
++		mmc_hostname(mmc));
++}
++
++static void atmci_cleanup_debugfs(struct atmel_mci *host)
++{
++	if (host->debugfs_root) {
++		debugfs_remove(host->debugfs_completed_events);
++		debugfs_remove(host->debugfs_pending_events);
++		debugfs_remove(host->debugfs_req);
++		debugfs_remove(host->debugfs_regs);
++		debugfs_remove(host->debugfs_root);
++		host->debugfs_root = NULL;
++	}
++}
++#else
++static inline void atmci_init_debugfs(struct atmel_mci *host)
++{
++
++}
++
++static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
++{
++
++}
++#endif /* CONFIG_DEBUG_FS */
++
++static inline unsigned int ns_to_clocks(struct atmel_mci *host,
++					unsigned int ns)
++{
++	return (ns * (host->bus_hz / 1000000) + 999) / 1000;
++}
++
++static void atmci_set_timeout(struct atmel_mci *host,
++			      struct mmc_data *data)
++{
++	static unsigned dtomul_to_shift[] = {
++		0, 4, 7, 8, 10, 12, 16, 20
++	};
++	unsigned timeout;
++	unsigned dtocyc, dtomul;
++
++	timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
++
++	for (dtomul = 0; dtomul < 8; dtomul++) {
++		unsigned shift = dtomul_to_shift[dtomul];
++		dtocyc = (timeout + (1 << shift) - 1) >> shift;
++		if (dtocyc < 15)
++			break;
++	}
++
++	if (dtomul >= 8) {
++		dtomul = 7;
++		dtocyc = 15;
++	}
++
++	dev_dbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
++			dtocyc << dtomul_to_shift[dtomul]);
++	mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
++				| MCI_BF(DTOCYC, dtocyc)));
++}
++
++/*
++ * Return mask with command flags to be enabled for this command.
++ */
++static u32 atmci_prepare_command(struct mmc_host *mmc,
++				 struct mmc_command *cmd)
++{
++	u32 cmdr;
++
++	cmd->error = 0;
++
++	cmdr = MCI_BF(CMDNB, cmd->opcode);
++
++	if (cmd->flags & MMC_RSP_PRESENT) {
++		if (cmd->flags & MMC_RSP_136)
++			cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
++		else
++			cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
++	}
++
++	/*
++	 * This should really be MAXLAT_5 for CMD2 and ACMD41, but
++	 * it's too difficult to determine whether this is an ACMD or
++	 * not. Better make it 64.
++	 */
++	cmdr |= MCI_BIT(MAXLAT);
++
++	if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
++		cmdr |= MCI_BIT(OPDCMD);
++
++	dev_dbg(&mmc->class_dev,
++		"cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
++		cmd->opcode, cmd->arg, cmd->flags, (unsigned long)cmdr);
++
++	return cmdr;
++}
++
++static void atmci_start_command(struct atmel_mci *host,
++				struct mmc_command *cmd,
++				u32 cmd_flags)
++{
++	WARN_ON(host->cmd);
++	host->cmd = cmd;
++
++	mci_writel(host, ARGR, cmd->arg);
++	mci_writel(host, CMDR, cmd_flags);
++
++	if (cmd->data)
++		dma_start_request(host->dma.req.req.dmac,
++				  host->dma.req.req.channel);
++}
++
++/*
++ * Returns a mask of flags to be set in the command register when the
++ * command to start the transfer is to be sent.
++ */
++static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
++{
++	struct atmel_mci *host = mmc_priv(mmc);
++	u32 cmd_flags;
++
++	WARN_ON(host->data);
++	host->data = data;
++
++	atmci_set_timeout(host, data);
++	mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
++				| MCI_BF(BLKLEN, data->blksz)));
++	host->dma.req.block_size = data->blksz;
++	host->dma.req.nr_blocks = data->blocks;
++
++	cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
++	if (data->flags & MMC_DATA_STREAM)
++		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
++	else if (data->blocks > 1)
++		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
++	else
++		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
++
++	if (data->flags & MMC_DATA_READ) {
++		cmd_flags |= MCI_BIT(TRDIR);
++		host->dma.req.nr_sg
++			= dma_map_sg(&host->pdev->dev, data->sg,
++				     data->sg_len, DMA_FROM_DEVICE);
++		host->dma.req.periph_id = host->dma.rx_periph_id;
++		host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
++		host->dma.req.data_reg = host->mapbase + MCI_RDR;
++	} else {
++		host->dma.req.nr_sg
++			= dma_map_sg(&host->pdev->dev, data->sg,
++				     data->sg_len, DMA_TO_DEVICE);
++		host->dma.req.periph_id = host->dma.tx_periph_id;
++		host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
++		host->dma.req.data_reg = host->mapbase + MCI_TDR;
++	}
++	host->dma.req.sg = data->sg;
++
++	dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
++
++	return cmd_flags;
++}
++
++static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++	struct atmel_mci *host = mmc_priv(mmc);
++	struct mmc_data *data = mrq->data;
++	u32 iflags;
++	u32 cmdflags = 0;
++
++	iflags = mci_readl(host, IMR);
++	if (iflags)
++		dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
++				mci_readl(host, IMR));
++
++	WARN_ON(host->mrq != NULL);
++	host->mrq = mrq;
++	host->pending_events = 0;
++	host->completed_events = 0;
++
++	iflags = MCI_BIT(CMDRDY);
++	cmdflags = atmci_prepare_command(mmc, mrq->cmd);
++
++	if (mrq->stop) {
++		WARN_ON(!data);
++
++		host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
++		host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
++		if (!(data->flags & MMC_DATA_WRITE))
++			host->stop_cmdr |= MCI_BIT(TRDIR);
++		if (data->flags & MMC_DATA_STREAM)
++			host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
++		else
++			host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
++	}
++	if (data) {
++		cmdflags |= atmci_prepare_data(mmc, data);
++		iflags |= MCI_DATA_ERROR_FLAGS;
++	}
++
++	atmci_start_command(host, mrq->cmd, cmdflags);
++	mci_writel(host, IER, iflags);
++}
++
++static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++	struct atmel_mci *host = mmc_priv(mmc);
++	u32 mr;
++
++	if (ios->clock) {
++		u32 clkdiv;
++
++		/* Set clock rate */
++		clkdiv = host->bus_hz / (2 * ios->clock) - 1;
++		if (clkdiv > 255) {
++			dev_warn(&mmc->class_dev,
++				"clock %u too slow; using %lu\n",
++				ios->clock, host->bus_hz / (2 * 256));
++			clkdiv = 255;
++		}
++
++		mr = mci_readl(host, MR);
++		mr = MCI_BFINS(CLKDIV, clkdiv, mr)
++			| MCI_BIT(WRPROOF) | MCI_BIT(RDPROOF);
++		mci_writel(host, MR, mr);
++
++		/* Enable the MCI controller */
++		mci_writel(host, CR, MCI_BIT(MCIEN));
++	} else {
++		/* Disable the MCI controller */
++		mci_writel(host, CR, MCI_BIT(MCIDIS));
++	}
++
++	switch (ios->bus_width) {
++	case MMC_BUS_WIDTH_1:
++		mci_writel(host, SDCR, 0);
++		break;
++	case MMC_BUS_WIDTH_4:
++		mci_writel(host, SDCR, MCI_BIT(SDCBUS));
++		break;
++	}
++
++	switch (ios->power_mode) {
++	case MMC_POWER_ON:
++		/* Send init sequence (74 clock cycles) */
++		mci_writel(host, IDR, ~0UL);
++		mci_writel(host, CMDR, MCI_BF(SPCMD, MCI_SPCMD_INIT_CMD));
++		while (!(mci_readl(host, SR) & MCI_BIT(CMDRDY)))
++			cpu_relax();
++		break;
++	default:
++		/*
++		 * TODO: None of the currently available AVR32-based
++		 * boards allow MMC power to be turned off. Implement
++		 * power control when this can be tested properly.
++		 */
++		break;
++	}
++}
++
++static int atmci_get_ro(struct mmc_host *mmc)
++{
++	int read_only = 0;
++	struct atmel_mci *host = mmc_priv(mmc);
++
++	if (host->wp_pin >= 0) {
++		read_only = gpio_get_value(host->wp_pin);
++		dev_dbg(&mmc->class_dev, "card is %s\n",
++				read_only ? "read-only" : "read-write");
++	} else {
++		dev_dbg(&mmc->class_dev,
++			"no pin for checking read-only switch."
++			" Assuming write-enable.\n");
++	}
++
++	return read_only;
++}
++
++static struct mmc_host_ops atmci_ops = {
++	.request	= atmci_request,
++	.set_ios	= atmci_set_ios,
++	.get_ro		= atmci_get_ro,
++};
++
++static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++	struct atmel_mci *host = mmc_priv(mmc);
++
++	WARN_ON(host->cmd || host->data);
++	host->mrq = NULL;
++
++	mmc_request_done(mmc, mrq);
++}
++
++static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
++			  u32 flags)
++{
++	struct atmel_mci *host = mmc_priv(mmc);
++
++	atmci_start_command(host, data->stop, host->stop_cmdr | flags);
++	mci_writel(host, IER, MCI_BIT(CMDRDY));
++}
++
++static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
++{
++	host->data = NULL;
++	dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
++		     ((data->flags & MMC_DATA_WRITE)
++		      ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
++
++	/*
++	 * Data might complete before command for very short transfers
++	 * (like READ_SCR)
++	 */
++	if (mci_cmd_is_complete(host)
++	    && (!data->stop || mci_stop_is_complete(host)))
++		atmci_request_end(host->mmc, data->mrq);
++}
++
++static void atmci_command_complete(struct atmel_mci *host,
++			struct mmc_command *cmd, u32 status)
++{
++	if (status & MCI_BIT(RTOE))
++		cmd->error = -ETIMEDOUT;
++	else if ((cmd->flags & MMC_RSP_CRC)
++			&& (status & MCI_BIT(RCRCE)))
++		cmd->error = -EILSEQ;
++	else if (status & (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | MCI_BIT(RENDE)))
++		cmd->error = -EIO;
++
++	if (cmd->error) {
++		dev_dbg(&host->mmc->class_dev,
++				"command error: op=0x%x status=0x%08x\n",
++				cmd->opcode, status);
++
++		if (cmd->data) {
++			dma_stop_request(host->dma.req.req.dmac,
++					host->dma.req.req.channel);
++			mci_writel(host, IDR, MCI_BIT(NOTBUSY)
++					| MCI_DATA_ERROR_FLAGS);
++			host->data = NULL;
++		}
++	}
++}
++
++static void atmci_tasklet_func(unsigned long priv)
++{
++	struct mmc_host *mmc = (struct mmc_host *)priv;
++	struct atmel_mci *host = mmc_priv(mmc);
++	struct mmc_request *mrq = host->mrq;
++	struct mmc_data *data = host->data;
++
++	dev_vdbg(&mmc->class_dev,
++		"tasklet: pending/completed/mask %lx/%lx/%x\n",
++		 host->pending_events, host->completed_events,
++		 mci_readl(host, IMR));
++
++	if (mci_clear_cmd_is_pending(host)) {
++		mci_set_cmd_complete(host);
++		atmci_command_complete(host, mrq->cmd, host->cmd_status);
++		if (!host->data || mci_data_is_complete(host)
++		    || mci_data_error_is_complete(host))
++			atmci_request_end(mmc, mrq);
++	}
++	if (mci_clear_stop_is_pending(host)) {
++		mci_set_stop_complete(host);
++		atmci_command_complete(host, mrq->stop, host->stop_status);
++		if (mci_data_is_complete(host)
++		    || mci_data_error_is_complete(host))
++			atmci_request_end(mmc, mrq);
++	}
++	if (mci_clear_dma_error_is_pending(host)) {
++		mci_set_dma_error_complete(host);
++		mci_clear_data_pending(host);
++
++		/* DMA controller got bus error => invalid address */
++		data->error = -EIO;
++
++		dev_dbg(&mmc->class_dev, "dma error after %u bytes xfered\n",
++				host->data->bytes_xfered);
++
++		if (data->stop
++		    && !mci_set_stop_sent_is_completed(host))
++			/* TODO: Check if card is still present */
++			send_stop_cmd(host->mmc, data, 0);
++
++		atmci_data_complete(host, data);
++	}
++	if (mci_clear_data_error_is_pending(host)) {
++		u32 status = host->data_status;
++
++		mci_set_data_error_complete(host);
++		mci_clear_data_pending(host);
++
++		dma_stop_request(host->dma.req.req.dmac,
++				 host->dma.req.req.channel);
++
++		if (status & MCI_BIT(DCRCE)) {
++			dev_dbg(&mmc->class_dev, "data CRC error\n");
++			data->error = -EILSEQ;
++		} else if (status & MCI_BIT(DTOE)) {
++			dev_dbg(&mmc->class_dev, "data timeout error\n");
++			data->error = -ETIMEDOUT;
++		} else {
++			dev_dbg(&mmc->class_dev, "data FIFO error\n");
++			data->error = -EIO;
++		}
++		dev_dbg(&mmc->class_dev, "bytes xfered: %u\n",
++				data->bytes_xfered);
++
++		if (data->stop
++		    && !mci_set_stop_sent_is_completed(host))
++			/* TODO: Check if card is still present */
++			send_stop_cmd(host->mmc, data, 0);
++
++		atmci_data_complete(host, data);
++	}
++	if (mci_clear_data_is_pending(host)) {
++		mci_set_data_complete(host);
++		data->bytes_xfered = data->blocks * data->blksz;
++		atmci_data_complete(host, data);
++	}
++	if (mci_clear_card_detect_is_pending(host)) {
++		/* Reset controller if card is gone */
++		if (!host->present) {
++			mci_writel(host, CR, MCI_BIT(SWRST));
++			mci_writel(host, IDR, ~0UL);
++			mci_writel(host, CR, MCI_BIT(MCIEN));
++		}
++
++		/* Clean up queue if present */
++		if (mrq) {
++			if (!mci_cmd_is_complete(host))
++				mrq->cmd->error = -ETIMEDOUT;
++			if (mrq->data && !mci_data_is_complete(host)
++			    && !mci_data_error_is_complete(host)) {
++				dma_stop_request(host->dma.req.req.dmac,
++						host->dma.req.req.channel);
++				host->data->error = -ETIMEDOUT;
++				atmci_data_complete(host, data);
++			}
++			if (mrq->stop && !mci_stop_is_complete(host))
++				mrq->stop->error = -ETIMEDOUT;
++
++			host->cmd = NULL;
++			atmci_request_end(mmc, mrq);
++		}
++		mmc_detect_change(host->mmc, msecs_to_jiffies(100));
++	}
++}
++
++static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
++{
++	struct atmel_mci *host = mmc_priv(mmc);
++	struct mmc_command *cmd = host->cmd;
++
++	/*
++	 * Read the response now so that we're free to send a new
++	 * command immediately.
++	 */
++	cmd->resp[0] = mci_readl(host, RSPR);
++	cmd->resp[1] = mci_readl(host, RSPR);
++	cmd->resp[2] = mci_readl(host, RSPR);
++	cmd->resp[3] = mci_readl(host, RSPR);
++
++	mci_writel(host, IDR, MCI_BIT(CMDRDY));
++	host->cmd = NULL;
++
++	if (mci_stop_sent_is_complete(host)) {
++		host->stop_status = status;
++		mci_set_stop_pending(host);
++	} else {
++		if (host->mrq->stop && mci_dma_is_complete(host)
++				&& !mci_set_stop_sent_is_completed(host))
++			send_stop_cmd(host->mmc, host->data, 0);
++		host->cmd_status = status;
++		mci_set_cmd_pending(host);
++	}
++
++	tasklet_schedule(&host->tasklet);
++}
++
++static void atmci_xfer_complete(struct dma_request *_req)
++{
++	struct dma_request_sg *req = to_dma_request_sg(_req);
++	struct atmel_mci_dma *dma;
++	struct atmel_mci *host;
++	struct mmc_data *data;
++
++	dma = container_of(req, struct atmel_mci_dma, req);
++	host = container_of(dma, struct atmel_mci, dma);
++	data = host->data;
++
++	/*
++	 * This callback may be called before we see the CMDRDY
++	 * interrupt under heavy irq load (possibly caused by other
++	 * drivers) or when interrupts are disabled for a long time.
++	 */
++	mci_set_dma_complete(host);
++	if (data->stop && mci_cmd_is_complete(host)
++			&& !mci_set_stop_sent_is_completed(host))
++		send_stop_cmd(host->mmc, data, 0);
++
++	/*
++	 * Regardless of what the documentation says, we have to wait
++	 * for NOTBUSY even after block read operations.
++	 *
++	 * When the DMA transfer is complete, the controller may still
++	 * be reading the CRC from the card, i.e. the data transfer is
++	 * still in progress and we haven't seen all the potential
++	 * error bits yet.
++	 */
++	mci_writel(host, IER, MCI_BIT(NOTBUSY));
++}
++
++static void atmci_dma_error(struct dma_request *_req)
++{
++	struct dma_request_sg *req = to_dma_request_sg(_req);
++	struct atmel_mci_dma *dma;
++	struct atmel_mci *host;
++
++	dma = container_of(req, struct atmel_mci_dma, req);
++	host = container_of(dma, struct atmel_mci, dma);
++
++	mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++			       | MCI_DATA_ERROR_FLAGS));
++
++	mci_set_dma_error_pending(host);
++	tasklet_schedule(&host->tasklet);
++}
++
++static irqreturn_t atmci_interrupt(int irq, void *dev_id)
++{
++	struct mmc_host *mmc = dev_id;
++	struct atmel_mci *host = mmc_priv(mmc);
++	u32 status, mask, pending;
++
++	spin_lock(&mmc->lock);
++
++	status = mci_readl(host, SR);
++	mask = mci_readl(host, IMR);
++	pending = status & mask;
++
++	do {
++		if (pending & MCI_DATA_ERROR_FLAGS) {
++			mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++					       | MCI_DATA_ERROR_FLAGS));
++			host->data_status = status;
++			mci_set_data_error_pending(host);
++			tasklet_schedule(&host->tasklet);
++			break;
++		}
++		if (pending & MCI_BIT(CMDRDY))
++			atmci_cmd_interrupt(mmc, status);
++		if (pending & MCI_BIT(NOTBUSY)) {
++			mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++					       | MCI_DATA_ERROR_FLAGS));
++			mci_set_data_pending(host);
++			tasklet_schedule(&host->tasklet);
++		}
++
++		status = mci_readl(host, SR);
++		mask = mci_readl(host, IMR);
++		pending = status & mask;
++	} while (pending);
++
++	spin_unlock(&mmc->lock);
++
++	return IRQ_HANDLED;
++}
++
++static irqreturn_t atmci_detect_change(int irq, void *dev_id)
++{
++	struct mmc_host *mmc = dev_id;
++	struct atmel_mci *host = mmc_priv(mmc);
++
++	int present = !gpio_get_value(irq_to_gpio(irq));
++
++	if (present != host->present) {
++		dev_dbg(&mmc->class_dev, "card %s\n",
++			present ? "inserted" : "removed");
++		host->present = present;
++		mci_set_card_detect_pending(host);
++		tasklet_schedule(&host->tasklet);
++	}
++	return IRQ_HANDLED;
++}
++
++static int __devinit atmci_probe(struct platform_device *pdev)
++{
++	struct mci_platform_data *board;
++	struct atmel_mci *host;
++	struct mmc_host *mmc;
++	struct resource *regs;
++	int irq;
++	int ret;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs)
++		return -ENXIO;
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0)
++		return irq;
++
++	board = pdev->dev.platform_data;
++
++	mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
++	if (!mmc)
++		return -ENOMEM;
++
++	host = mmc_priv(mmc);
++	host->pdev = pdev;
++	host->mmc = mmc;
++	if (board) {
++		host->detect_pin = board->detect_pin;
++		host->wp_pin = board->wp_pin;
++	} else {
++		host->detect_pin = -1;
++		host->detect_pin = -1;
++	}
++
++	host->mck = clk_get(&pdev->dev, "mci_clk");
++	if (IS_ERR(host->mck)) {
++		ret = PTR_ERR(host->mck);
++		goto out_free_host;
++	}
++	clk_enable(host->mck);
++
++	ret = -ENOMEM;
++	host->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!host->regs)
++		goto out_disable_clk;
++
++	host->bus_hz = clk_get_rate(host->mck);
++	host->mapbase = regs->start;
++
++	mmc->ops = &atmci_ops;
++	mmc->f_min = (host->bus_hz + 511) / 512;
++	mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
++	mmc->ocr_avail	= MMC_VDD_32_33 | MMC_VDD_33_34;
++	mmc->caps |= MMC_CAP_4_BIT_DATA;
++
++	tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
++
++	ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
++	if (ret)
++		goto out_unmap;
++
++	/* Assume card is present if we don't have a detect pin */
++	host->present = 1;
++	if (host->detect_pin >= 0) {
++		if (gpio_request(host->detect_pin, "mmc_detect")) {
++			dev_dbg(&mmc->class_dev, "no detect pin available\n");
++			host->detect_pin = -1;
++		} else {
++			host->present = !gpio_get_value(host->detect_pin);
++		}
++	}
++	if (host->wp_pin >= 0) {
++		if (gpio_request(host->wp_pin, "mmc_wp")) {
++			dev_dbg(&mmc->class_dev, "no WP pin available\n");
++			host->wp_pin = -1;
++		}
++	}
++
++	/* TODO: Get this information from platform data */
++	ret = -ENOMEM;
++	host->dma.req.req.dmac = find_dma_controller(0);
++	if (!host->dma.req.req.dmac) {
++		dev_dbg(&mmc->class_dev, "no DMA controller available\n");
++		goto out_free_irq;
++	}
++	ret = dma_alloc_channel(host->dma.req.req.dmac);
++	if (ret < 0) {
++		dev_dbg(&mmc->class_dev, "unable to allocate DMA channel\n");
++		goto out_free_irq;
++	}
++	host->dma.req.req.channel = ret;
++	host->dma.req.width = DMA_WIDTH_32BIT;
++	host->dma.req.req.xfer_complete = atmci_xfer_complete;
++	host->dma.req.req.block_complete = NULL; // atmci_block_complete;
++	host->dma.req.req.error = atmci_dma_error;
++	host->dma.rx_periph_id = 0;
++	host->dma.tx_periph_id = 1;
++
++	mci_writel(host, CR, MCI_BIT(SWRST));
++	mci_writel(host, IDR, ~0UL);
++
++	platform_set_drvdata(pdev, host);
++
++	mmc_add_host(mmc);
++
++	if (host->detect_pin >= 0) {
++		ret = request_irq(gpio_to_irq(host->detect_pin),
++				  atmci_detect_change,
++				  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
++				  DRIVER_NAME, mmc);
++		if (ret) {
++			dev_dbg(&mmc->class_dev,
++				"could not request IRQ %d for detect pin\n",
++				gpio_to_irq(host->detect_pin));
++			gpio_free(host->detect_pin);
++			host->detect_pin = -1;
++		}
++	}
++
++	dev_info(&mmc->class_dev, "Atmel MCI controller at 0x%08lx irq %d\n",
++			host->mapbase, irq);
++
++	atmci_init_debugfs(host);
++
++	return 0;
++
++out_free_irq:
++	if (host->detect_pin >= 0)
++		gpio_free(host->detect_pin);
++	if (host->wp_pin >= 0)
++		gpio_free(host->wp_pin);
++	free_irq(irq, mmc);
++out_unmap:
++	iounmap(host->regs);
++out_disable_clk:
++	clk_disable(host->mck);
++	clk_put(host->mck);
++out_free_host:
++	mmc_free_host(mmc);
++	return ret;
++}
++
++static int __devexit atmci_remove(struct platform_device *pdev)
++{
++	struct atmel_mci *host = platform_get_drvdata(pdev);
++
++	platform_set_drvdata(pdev, NULL);
++
++	if (host) {
++		atmci_cleanup_debugfs(host);
++
++		if (host->detect_pin >= 0) {
++			free_irq(gpio_to_irq(host->detect_pin), host->mmc);
++			cancel_delayed_work(&host->mmc->detect);
++			gpio_free(host->detect_pin);
++		}
++
++		mmc_remove_host(host->mmc);
++
++		mci_writel(host, IDR, ~0UL);
++		mci_writel(host, CR, MCI_BIT(MCIDIS));
++		mci_readl(host, SR);
++
++		dma_release_channel(host->dma.req.req.dmac,
++				    host->dma.req.req.channel);
++
++		if (host->wp_pin >= 0)
++			gpio_free(host->wp_pin);
++
++		free_irq(platform_get_irq(pdev, 0), host->mmc);
++		iounmap(host->regs);
++
++		clk_disable(host->mck);
++		clk_put(host->mck);
++
++		mmc_free_host(host->mmc);
++	}
++	return 0;
++}
++
++static struct platform_driver atmci_driver = {
++	.probe		= atmci_probe,
++	.remove		= __devexit_p(atmci_remove),
++	.driver		= {
++		.name		= DRIVER_NAME,
++	},
++};
++
++static int __init atmci_init(void)
++{
++	return platform_driver_register(&atmci_driver);
++}
++
++static void __exit atmci_exit(void)
++{
++	platform_driver_unregister(&atmci_driver);
++}
++
++module_init(atmci_init);
++module_exit(atmci_exit);
++
++MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
++MODULE_LICENSE("GPL");
+diff -Nrup linux-2.6.24/drivers/mmc/host/atmel-mci.h linux-avr32/drivers/mmc/host/atmel-mci.h
+--- linux-2.6.24/drivers/mmc/host/atmel-mci.h	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/drivers/mmc/host/atmel-mci.h	2008-02-01 14:51:39.000000000 -0500
+@@ -0,0 +1,192 @@
++/*
++ * Atmel MultiMedia Card Interface driver
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
++#define __DRIVERS_MMC_ATMEL_MCI_H__
++
++/* MCI register offsets */
++#define MCI_CR					0x0000
++#define MCI_MR					0x0004
++#define MCI_DTOR				0x0008
++#define MCI_SDCR				0x000c
++#define MCI_ARGR				0x0010
++#define MCI_CMDR				0x0014
++#define MCI_BLKR				0x0018
++#define MCI_RSPR				0x0020
++#define MCI_RSPR1				0x0024
++#define MCI_RSPR2				0x0028
++#define MCI_RSPR3				0x002c
++#define MCI_RDR					0x0030
++#define MCI_TDR					0x0034
++#define MCI_SR					0x0040
++#define MCI_IER					0x0044
++#define MCI_IDR					0x0048
++#define MCI_IMR					0x004c
++
++/* Bitfields in CR */
++#define MCI_MCIEN_OFFSET			0
++#define MCI_MCIEN_SIZE				1
++#define MCI_MCIDIS_OFFSET			1
++#define MCI_MCIDIS_SIZE				1
++#define MCI_PWSEN_OFFSET			2
++#define MCI_PWSEN_SIZE				1
++#define MCI_PWSDIS_OFFSET			3
++#define MCI_PWSDIS_SIZE				1
++#define MCI_SWRST_OFFSET			7
++#define MCI_SWRST_SIZE				1
++
++/* Bitfields in MR */
++#define MCI_CLKDIV_OFFSET			0
++#define MCI_CLKDIV_SIZE				8
++#define MCI_PWSDIV_OFFSET			8
++#define MCI_PWSDIV_SIZE				3
++#define MCI_RDPROOF_OFFSET			11
++#define MCI_RDPROOF_SIZE			1
++#define MCI_WRPROOF_OFFSET			12
++#define MCI_WRPROOF_SIZE			1
++#define MCI_DMAPADV_OFFSET			14
++#define MCI_DMAPADV_SIZE			1
++#define MCI_BLKLEN_OFFSET			16
++#define MCI_BLKLEN_SIZE				16
++
++/* Bitfields in DTOR */
++#define MCI_DTOCYC_OFFSET			0
++#define MCI_DTOCYC_SIZE				4
++#define MCI_DTOMUL_OFFSET			4
++#define MCI_DTOMUL_SIZE				3
++
++/* Bitfields in SDCR */
++#define MCI_SDCSEL_OFFSET			0
++#define MCI_SDCSEL_SIZE				4
++#define MCI_SDCBUS_OFFSET			7
++#define MCI_SDCBUS_SIZE				1
++
++/* Bitfields in ARGR */
++#define MCI_ARG_OFFSET				0
++#define MCI_ARG_SIZE				32
++
++/* Bitfields in CMDR */
++#define MCI_CMDNB_OFFSET			0
++#define MCI_CMDNB_SIZE				6
++#define MCI_RSPTYP_OFFSET			6
++#define MCI_RSPTYP_SIZE				2
++#define MCI_SPCMD_OFFSET			8
++#define MCI_SPCMD_SIZE				3
++#define MCI_OPDCMD_OFFSET			11
++#define MCI_OPDCMD_SIZE				1
++#define MCI_MAXLAT_OFFSET			12
++#define MCI_MAXLAT_SIZE				1
++#define MCI_TRCMD_OFFSET			16
++#define MCI_TRCMD_SIZE				2
++#define MCI_TRDIR_OFFSET			18
++#define MCI_TRDIR_SIZE				1
++#define MCI_TRTYP_OFFSET			19
++#define MCI_TRTYP_SIZE				2
++
++/* Bitfields in BLKR */
++#define MCI_BCNT_OFFSET				0
++#define MCI_BCNT_SIZE				16
++
++/* Bitfields in RSPRn */
++#define MCI_RSP_OFFSET				0
++#define MCI_RSP_SIZE				32
++
++/* Bitfields in SR/IER/IDR/IMR */
++#define MCI_CMDRDY_OFFSET			0
++#define MCI_CMDRDY_SIZE				1
++#define MCI_RXRDY_OFFSET			1
++#define MCI_RXRDY_SIZE				1
++#define MCI_TXRDY_OFFSET			2
++#define MCI_TXRDY_SIZE				1
++#define MCI_BLKE_OFFSET				3
++#define MCI_BLKE_SIZE				1
++#define MCI_DTIP_OFFSET				4
++#define MCI_DTIP_SIZE				1
++#define MCI_NOTBUSY_OFFSET			5
++#define MCI_NOTBUSY_SIZE			1
++#define MCI_ENDRX_OFFSET			6
++#define MCI_ENDRX_SIZE				1
++#define MCI_ENDTX_OFFSET			7
++#define MCI_ENDTX_SIZE				1
++#define MCI_RXBUFF_OFFSET			14
++#define MCI_RXBUFF_SIZE				1
++#define MCI_TXBUFE_OFFSET			15
++#define MCI_TXBUFE_SIZE				1
++#define MCI_RINDE_OFFSET			16
++#define MCI_RINDE_SIZE				1
++#define MCI_RDIRE_OFFSET			17
++#define MCI_RDIRE_SIZE				1
++#define MCI_RCRCE_OFFSET			18
++#define MCI_RCRCE_SIZE				1
++#define MCI_RENDE_OFFSET			19
++#define MCI_RENDE_SIZE				1
++#define MCI_RTOE_OFFSET				20
++#define MCI_RTOE_SIZE				1
++#define MCI_DCRCE_OFFSET			21
++#define MCI_DCRCE_SIZE				1
++#define MCI_DTOE_OFFSET				22
++#define MCI_DTOE_SIZE				1
++#define MCI_OVRE_OFFSET				30
++#define MCI_OVRE_SIZE				1
++#define MCI_UNRE_OFFSET				31
++#define MCI_UNRE_SIZE				1
++
++/* Constants for DTOMUL */
++#define MCI_DTOMUL_1_CYCLE			0
++#define MCI_DTOMUL_16_CYCLES			1
++#define MCI_DTOMUL_128_CYCLES			2
++#define MCI_DTOMUL_256_CYCLES			3
++#define MCI_DTOMUL_1024_CYCLES			4
++#define MCI_DTOMUL_4096_CYCLES			5
++#define MCI_DTOMUL_65536_CYCLES			6
++#define MCI_DTOMUL_1048576_CYCLES		7
++
++/* Constants for RSPTYP */
++#define MCI_RSPTYP_NO_RESP			0
++#define MCI_RSPTYP_48_BIT			1
++#define MCI_RSPTYP_136_BIT			2
++
++/* Constants for SPCMD */
++#define MCI_SPCMD_NO_SPEC_CMD			0
++#define MCI_SPCMD_INIT_CMD			1
++#define MCI_SPCMD_SYNC_CMD			2
++#define MCI_SPCMD_INT_CMD			4
++#define MCI_SPCMD_INT_RESP			5
++
++/* Constants for TRCMD */
++#define MCI_TRCMD_NO_TRANS			0
++#define MCI_TRCMD_START_TRANS			1
++#define MCI_TRCMD_STOP_TRANS			2
++
++/* Constants for TRTYP */
++#define MCI_TRTYP_BLOCK				0
++#define MCI_TRTYP_MULTI_BLOCK			1
++#define MCI_TRTYP_STREAM			2
++
++/* Bit manipulation macros */
++#define MCI_BIT(name)					\
++	(1 << MCI_##name##_OFFSET)
++#define MCI_BF(name,value)				\
++	(((value) & ((1 << MCI_##name##_SIZE) - 1))	\
++	 << MCI_##name##_OFFSET)
++#define MCI_BFEXT(name,value)				\
++	(((value) >> MCI_##name##_OFFSET)		\
++	 & ((1 << MCI_##name##_SIZE) - 1))
++#define MCI_BFINS(name,value,old)			\
++	(((old) & ~(((1 << MCI_##name##_SIZE) - 1)	\
++		    << MCI_##name##_OFFSET))		\
++	 | MCI_BF(name,value))
++
++/* Register access macros */
++#define mci_readl(port,reg)				\
++	__raw_readl((port)->regs + MCI_##reg)
++#define mci_writel(port,reg,value)			\
++	__raw_writel((value), (port)->regs + MCI_##reg)
++
++#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
+diff -Nrup linux-2.6.24/drivers/mmc/host/Kconfig linux-avr32/drivers/mmc/host/Kconfig
+--- linux-2.6.24/drivers/mmc/host/Kconfig	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/mmc/host/Kconfig	2008-02-01 14:51:39.000000000 -0500
+@@ -91,6 +91,16 @@ config MMC_AT91
+ 
+ 	  If unsure, say N.
+ 
++config MMC_ATMELMCI
++	tristate "Atmel Multimedia Card Interface support"
++	depends on AVR32 && MMC
++	help
++	  This selects the Atmel Multimedia Card Interface. If you have
++	  a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
++	  slot, say Y or M here.
++
++	  If unsure, say N.
++
+ config MMC_IMX
+ 	tristate "Motorola i.MX Multimedia Card Interface support"
+ 	depends on ARCH_IMX
+diff -Nrup linux-2.6.24/drivers/mmc/host/Makefile linux-avr32/drivers/mmc/host/Makefile
+--- linux-2.6.24/drivers/mmc/host/Makefile	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/mmc/host/Makefile	2008-02-01 14:51:39.000000000 -0500
+@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
+ obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP)		+= omap.o
+ obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
++obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
+ obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
+ obj-$(CONFIG_MMC_SPI)		+= mmc_spi.o
+ 
+diff -Nrup linux-2.6.24/drivers/mtd/chips/cfi_cmdset_0001.c linux-avr32/drivers/mtd/chips/cfi_cmdset_0001.c
+--- linux-2.6.24/drivers/mtd/chips/cfi_cmdset_0001.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/mtd/chips/cfi_cmdset_0001.c	2008-02-01 14:51:39.000000000 -0500
+@@ -50,6 +50,7 @@
+ #define I82802AC	0x00ac
+ #define MANUFACTURER_ST         0x0020
+ #define M50LPW080       0x002F
++#define AT49BV640D	0x02de
+ 
+ static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+@@ -157,6 +158,47 @@ static void cfi_tell_features(struct cfi
+ }
+ #endif
+ 
++/* Atmel chips don't use the same PRI format as Intel chips */
++static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
++{
++	struct map_info *map = mtd->priv;
++	struct cfi_private *cfi = map->fldrv_priv;
++	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
++	struct cfi_pri_atmel atmel_pri;
++	uint32_t features = 0;
++
++	/* Reverse byteswapping */
++	extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
++	extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
++	extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
++
++	memcpy(&atmel_pri, extp, sizeof(atmel_pri));
++	memset((char *)extp + 5, 0, sizeof(*extp) - 5);
++
++	printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
++
++	if (atmel_pri.Features & 0x01) /* chip erase supported */
++		features |= (1<<0);
++	if (atmel_pri.Features & 0x02) /* erase suspend supported */
++		features |= (1<<1);
++	if (atmel_pri.Features & 0x04) /* program suspend supported */
++		features |= (1<<2);
++	if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
++		features |= (1<<9);
++	if (atmel_pri.Features & 0x20) /* page mode read supported */
++		features |= (1<<7);
++	if (atmel_pri.Features & 0x40) /* queued erase supported */
++		features |= (1<<4);
++	if (atmel_pri.Features & 0x80) /* Protection bits supported */
++		features |= (1<<6);
++
++	extp->FeatureSupport = features;
++
++	/* burst write mode not supported */
++	cfi->cfiq->BufWriteTimeoutTyp = 0;
++	cfi->cfiq->BufWriteTimeoutMax = 0;
++}
++
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
+ static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
+@@ -234,6 +276,7 @@ static void fixup_use_powerup_lock(struc
+ }
+ 
+ static struct cfi_fixup cfi_fixup_table[] = {
++	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
+ #endif
+diff -Nrup linux-2.6.24/drivers/mtd/chips/cfi_cmdset_0002.c linux-avr32/drivers/mtd/chips/cfi_cmdset_0002.c
+--- linux-2.6.24/drivers/mtd/chips/cfi_cmdset_0002.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/mtd/chips/cfi_cmdset_0002.c	2008-02-01 14:51:39.000000000 -0500
+@@ -185,6 +185,10 @@ static void fixup_convert_atmel_pri(stru
+ 		extp->TopBottom = 2;
+ 	else
+ 		extp->TopBottom = 3;
++
++	/* burst write mode not supported */
++	cfi->cfiq->BufWriteTimeoutTyp = 0;
++	cfi->cfiq->BufWriteTimeoutMax = 0;
+ }
+ 
+ static void fixup_use_secsi(struct mtd_info *mtd, void *param)
+@@ -217,6 +221,7 @@ static void fixup_use_atmel_lock(struct 
+ }
+ 
+ static struct cfi_fixup cfi_fixup_table[] = {
++	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef AMD_BOOTLOC_BUG
+ 	{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
+ #endif
+@@ -229,7 +234,6 @@ static struct cfi_fixup cfi_fixup_table[
+ #if !FORCE_WORD_WRITE
+ 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
+ #endif
+-	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ 	{ 0, 0, NULL, NULL }
+ };
+ static struct cfi_fixup jedec_fixup_table[] = {
+diff -Nrup linux-2.6.24/drivers/pcmcia/at32_cf.c linux-avr32/drivers/pcmcia/at32_cf.c
+--- linux-2.6.24/drivers/pcmcia/at32_cf.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/drivers/pcmcia/at32_cf.c	2008-02-01 14:51:42.000000000 -0500
+@@ -0,0 +1,533 @@
++/*
++ * Driver for AVR32 Static Memory Controller: CompactFlash support
++ *
++ * Copyright (C) 2006 Atmel Norway
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++ * 02111-1307, USA.
++ *
++ * The full GNU General Public License is included in this
++ * distribution in the file called COPYING.
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++#include <linux/dma-mapping.h>
++
++#include <pcmcia/ss.h>
++
++#include <asm/gpio.h>
++#include <asm/io.h>
++#include <asm/arch/board.h>
++
++#include <asm/arch/smc.h>
++
++struct at32_cf_socket {
++	struct pcmcia_socket	socket;
++	int			detect_pin;
++	int			reset_pin;
++	int			vcc_pin;
++	int			ready_pin;
++	struct resource		res_attr;
++	struct resource		res_mem;
++	struct resource		res_io;
++	struct smc_config	smc;
++	unsigned int		irq;
++	unsigned int		cf_cs;
++	socket_state_t		state;
++	unsigned		present:1;
++};
++#define to_at32_cf(sock) container_of(sock, struct at32_cf_socket, socket)
++
++/*
++ * We have the following memory layout relative to the base address:
++ *
++ *   Alt IDE Mode:      00e0 0000 -> 00ff ffff
++ *   True IDE Mode:     00c0 0000 -> 00df ffff
++ *   I/O memory:        0080 0000 -> 00bf ffff
++ *   Common memory:     0040 0000 -> 007f ffff
++ *   Attribute memory:  0000 0000 -> 003f ffff
++ */
++#define CF_ATTR_OFFSET	0x00000000
++#define CF_MEM_OFFSET	0x00400000
++#define CF_IO_OFFSET	0x00800000
++#define CF_RES_SIZE	4096
++
++#ifdef DEBUG
++
++static int pc_debug;
++module_param(pc_debug, int, 0644);
++
++static void at32_cf_debug(struct at32_cf_socket *cf, const char *func,
++			  int level, const char *fmt, ...)
++{
++	va_list args;
++
++	if (pc_debug > level) {
++		printk(KERN_DEBUG "at32_cf/%u: %s: ", cf->cf_cs, func);
++		va_start(args, fmt);
++		vprintk(fmt, args);
++		va_end(args);
++	}
++}
++
++#define debug(cf, lvl, fmt, arg...)			\
++	at32_cf_debug(cf, __func__, lvl, fmt, ##arg)
++
++#else
++#define debug(cf, lvl, fmt, arg...) do { } while (0)
++#endif
++
++static inline int at32_cf_present(struct at32_cf_socket *cf)
++{
++	int present = 1;
++
++	/* If we don't have a detect pin, assume the card is present */
++	if (cf->detect_pin >= 0)
++		present = !gpio_get_value(cf->detect_pin);
++
++	return present;
++}
++
++static irqreturn_t at32_cf_irq(int irq, void *dev_id)
++{
++	struct at32_cf_socket *cf = dev_id;
++	unsigned int present;
++
++	present = at32_cf_present(cf);
++	if (present != cf->present) {
++		cf->present = present;
++		debug(cf, 3, "card %s\n", present ? "present" : "gone");
++		pcmcia_parse_events(&cf->socket, SS_DETECT);
++	}
++
++	return IRQ_HANDLED;
++}
++
++static int at32_cf_get_status(struct pcmcia_socket *sock, u_int *value)
++{
++	struct at32_cf_socket *cf;
++	u_int status = 0;
++
++	cf = container_of(sock, struct at32_cf_socket, socket);
++
++	if (at32_cf_present(cf)) {
++		/* NOTE: gpio on AP7xxx is 3.3V */
++		status = SS_DETECT | SS_3VCARD;
++		if (cf->ready_pin < 0 || gpio_get_value(cf->ready_pin))
++			status |= SS_READY;
++		if (cf->vcc_pin < 0 || gpio_get_value(cf->vcc_pin))
++			status |= SS_POWERON;
++	}
++
++	*value = status;
++	return 0;
++}
++
++static int at32_cf_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
++{
++	struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
++
++	debug(cf, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n",
++			(state->csc_mask==0)?"<NONE> ":"",
++			(state->csc_mask&SS_DETECT)?"DETECT ":"",
++			(state->csc_mask&SS_READY)?"READY ":"",
++			(state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
++			(state->csc_mask&SS_BATWARN)?"BATWARN ":"",
++			(state->csc_mask&SS_STSCHG)?"STSCHG ":"",
++			(state->flags==0)?"<NONE> ":"",
++			(state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
++			(state->flags&SS_IOCARD)?"IOCARD ":"",
++			(state->flags&SS_RESET)?"RESET ":"",
++			(state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
++			(state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
++			state->Vcc, state->Vpp, state->io_irq);
++
++	/*
++	 * TODO: Allow boards to override this in case they have level
++	 * converters.
++	 */
++	switch (state->Vcc) {
++	case 0:
++		if (cf->vcc_pin >= 0)
++			gpio_set_value(cf->vcc_pin, 0);
++		break;
++	case 33:
++		if (cf->vcc_pin >= 0)
++			gpio_set_value(cf->vcc_pin, 1);
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	if (cf->reset_pin >= 0)
++		gpio_set_value(cf->reset_pin, state->flags & SS_RESET);
++
++	cf->state = *state;
++
++	return 0;
++}
++
++static int at32_cf_socket_init(struct pcmcia_socket *sock)
++{
++	debug(to_at32_cf(sock), 2, "called\n");
++
++	return 0;
++}
++
++static int at32_cf_suspend(struct pcmcia_socket *sock)
++{
++	debug(to_at32_cf(sock), 2, "called\n");
++
++	at32_cf_set_socket(sock, &dead_socket);
++
++	return 0;
++}
++
++static int at32_cf_set_io_map(struct pcmcia_socket *sock,
++			      struct pccard_io_map *map)
++{
++	struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
++	int retval;
++
++	debug(cf, 2, "map %u  speed %u start 0x%08x stop 0x%08x\n",
++		map->map, map->speed, map->start, map->stop);
++	debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
++		(map->flags == 0) ? "<NONE>":"",
++		(map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
++		(map->flags & MAP_16BIT) ? "16BIT " : "",
++		(map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
++		(map->flags & MAP_0WS) ? "0WS " : "",
++		(map->flags & MAP_WRPROT) ? "WRPROT " : "",
++		(map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
++		(map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
++
++	map->flags &= MAP_ACTIVE | MAP_16BIT | MAP_USE_WAIT;
++
++	if (map->flags & MAP_16BIT)
++		cf->smc.bus_width = 2;
++	else
++		cf->smc.bus_width = 1;
++
++	if (map->flags & MAP_USE_WAIT)
++		cf->smc.nwait_mode = 3;
++	else
++		cf->smc.nwait_mode = 0;
++
++	retval = smc_set_configuration(cf->cf_cs, &cf->smc);
++	if (retval) {
++		printk(KERN_ERR "at32_cf: could not set up SMC for I/O\n");
++		return retval;
++	}
++
++	map->start = cf->socket.io_offset;
++	map->stop = map->start + CF_RES_SIZE - 1;
++
++	return 0;
++}
++
++static int
++at32_cf_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
++{
++	struct at32_cf_socket *cf;
++	struct resource *res;
++	int retval;
++
++	cf = container_of(sock, struct at32_cf_socket, socket);
++
++	debug(cf, 2, "map %u speed %u card_start %08x\n",
++		map->map, map->speed, map->card_start);
++	debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
++		(map->flags==0)?"<NONE>":"",
++		(map->flags&MAP_ACTIVE)?"ACTIVE ":"",
++		(map->flags&MAP_16BIT)?"16BIT ":"",
++		(map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
++		(map->flags&MAP_0WS)?"0WS ":"",
++		(map->flags&MAP_WRPROT)?"WRPROT ":"",
++		(map->flags&MAP_ATTRIB)?"ATTRIB ":"",
++		(map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
++
++	if (map->card_start)
++		return -EINVAL;
++
++	map->flags &= MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT | MAP_USE_WAIT;
++
++	if (map->flags & MAP_ATTRIB) {
++		res = &cf->res_attr;
++
++		/* Linksys WCF12 seems to use WAIT when reading CIS */
++		map->flags |= MAP_USE_WAIT;
++	} else {
++		res = &cf->res_mem;
++	}
++
++	if (map->flags & MAP_USE_WAIT)
++		cf->smc.nwait_mode = 3;
++	else
++		cf->smc.nwait_mode = 0;
++
++	retval = smc_set_configuration(cf->cf_cs, &cf->smc);
++	if (retval) {
++		printk(KERN_ERR "at32_cf: could not set up SMC for mem\n");
++		return retval;
++	}
++
++	map->static_start = res->start;
++
++	return 0;
++}
++
++static struct pccard_operations at32_cf_ops = {
++	.init			= at32_cf_socket_init,
++	.suspend		= at32_cf_suspend,
++	.get_status		= at32_cf_get_status,
++	.set_socket		= at32_cf_set_socket,
++	.set_io_map		= at32_cf_set_io_map,
++	.set_mem_map		= at32_cf_set_mem_map,
++};
++
++static int __init request_pin(struct platform_device *pdev,
++			      unsigned int pin, const char *name)
++{
++	if (gpio_request(pin, name)) {
++		dev_warn(&pdev->dev, "failed to request %s pin\n", name);
++		return -1;
++	}
++
++	return pin;
++}
++
++static struct smc_timing at32_cf_timing __initdata = {
++	.ncs_read_setup		= 30,
++	.nrd_setup		= 100,
++	.ncs_write_setup	= 30,
++	.nwe_setup		= 100,
++
++	.ncs_read_pulse		= 360,
++	.nrd_pulse		= 290,
++	.ncs_write_pulse	= 360,
++	.nwe_pulse		= 290,
++
++	.read_cycle		= 420,
++	.write_cycle		= 420,
++};
++
++static int __init at32_cf_probe(struct platform_device *pdev)
++{
++	struct at32_cf_socket	*cf;
++	struct cf_platform_data	*board = pdev->dev.platform_data;
++	struct resource		*res_skt;
++	int			irq;
++	int			ret;
++
++	dev_dbg(&pdev->dev, "probe");
++
++	if (!board)
++		return -ENXIO;
++
++	res_skt = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res_skt)
++		return -ENXIO;
++
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0)
++		return irq;
++
++	cf = kzalloc(sizeof(struct at32_cf_socket), GFP_KERNEL);
++	if (!cf)
++		return -ENOMEM;
++
++	cf->detect_pin = -1;
++	cf->reset_pin = -1;
++	cf->vcc_pin = -1;
++	cf->ready_pin = -1;
++	cf->cf_cs = board->cs;
++
++	if (board->detect_pin != GPIO_PIN_NONE)
++		cf->detect_pin = request_pin(pdev, board->detect_pin,
++					     "cf_detect");
++	if (board->reset_pin != GPIO_PIN_NONE)
++		cf->reset_pin = request_pin(pdev, board->reset_pin,
++					    "cf_reset");
++	if (board->vcc_pin != GPIO_PIN_NONE)
++		cf->vcc_pin = request_pin(pdev, board->vcc_pin,
++					  "cf_vcc");
++	if (board->ready_pin != GPIO_PIN_NONE)
++		/* READY is also used for irq through EIM */
++		cf->ready_pin = board->ready_pin;
++
++	debug(cf, 2, "pins: detect=%d reset=%d vcc=%d\n",
++	      cf->detect_pin, cf->reset_pin, cf->vcc_pin);
++
++	cf->socket.pci_irq = irq;
++	cf->socket.ops = &at32_cf_ops;
++	cf->socket.resource_ops = &pccard_static_ops;
++	cf->socket.dev.parent = &pdev->dev;
++	cf->socket.owner = THIS_MODULE;
++	cf->socket.features =
++		SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
++	cf->socket.map_size = CF_RES_SIZE;
++
++	cf->res_attr.start = res_skt->start + CF_ATTR_OFFSET;
++	cf->res_attr.end = cf->res_attr.start + CF_RES_SIZE - 1;
++	cf->res_attr.name = "attribute";
++	cf->res_attr.flags = IORESOURCE_MEM;
++	ret = request_resource(res_skt, &cf->res_attr);
++	if (ret)
++		goto err_request_res_attr;
++
++	cf->res_mem.start = res_skt->start + CF_MEM_OFFSET;
++	cf->res_mem.end = cf->res_mem.start + CF_RES_SIZE - 1;
++	cf->res_mem.name = "memory";
++	cf->res_mem.flags = IORESOURCE_MEM;
++	ret = request_resource(res_skt, &cf->res_mem);
++	if (ret)
++		goto err_request_res_mem;
++
++	cf->res_io.start = res_skt->start + CF_IO_OFFSET;
++	cf->res_io.end = cf->res_io.start + CF_RES_SIZE - 1;
++	cf->res_io.name = "io";
++	cf->res_io.flags = IORESOURCE_MEM;
++	ret = request_resource(res_skt, &cf->res_io);
++	if (ret)
++		goto err_request_res_io;
++
++	cf->socket.io_offset = cf->res_io.start;
++
++	if (cf->detect_pin >= 0) {
++		ret = request_irq(gpio_to_irq(cf->detect_pin), at32_cf_irq,
++				  IRQF_SHARED, "cf_detect", cf);
++		if (ret) {
++			debug(cf, 1,
++			      "failed to request cf_detect interrupt\n");
++			goto err_detect_irq;
++		}
++	}
++
++	cf->present = at32_cf_present(cf);
++
++	/* Setup SMC timings */
++	smc_set_timing(&cf->smc, &at32_cf_timing);
++
++	cf->smc.bus_width = 2;
++	cf->smc.nrd_controlled = 1;
++	cf->smc.nwe_controlled = 1;
++	cf->smc.nwait_mode = 0;
++	cf->smc.byte_write = 0;
++	cf->smc.tdf_cycles = 8;
++	cf->smc.tdf_mode = 0;
++
++	ret = smc_set_configuration(cf->cf_cs, &cf->smc);
++	if (ret) {
++		debug(cf, 1, "failed to configure SMC\n", ret);
++		goto err_smc;
++	}
++
++	ret = pcmcia_register_socket(&cf->socket);
++	if (ret) {
++		debug(cf, 1, "failed to register socket: %d\n", ret);
++		goto err_register_socket;
++	}
++
++	if (cf->reset_pin >= 0)
++		gpio_direction_output(cf->reset_pin, 0);
++
++	platform_set_drvdata(pdev, cf);
++
++	dev_info(&pdev->dev, "Atmel SMC CF interface at 0x%08lx\n",
++		 (unsigned long)res_skt->start);
++
++	return 0;
++
++err_register_socket:
++err_smc:
++	if (cf->detect_pin >= 0)
++		free_irq(gpio_to_irq(cf->detect_pin), cf);
++err_detect_irq:
++	release_resource(&cf->res_io);
++err_request_res_io:
++	release_resource(&cf->res_mem);
++err_request_res_mem:
++	release_resource(&cf->res_attr);
++err_request_res_attr:
++	if (cf->vcc_pin >= 0)
++		gpio_free(cf->vcc_pin);
++	if (cf->reset_pin >= 0)
++		gpio_free(cf->reset_pin);
++	if (cf->detect_pin >= 0)
++		gpio_free(cf->detect_pin);
++	kfree(cf);
++
++	return ret;
++}
++
++static int __exit at32_cf_remove(struct platform_device *pdev)
++{
++	struct at32_cf_socket *cf = platform_get_drvdata(pdev);
++
++	pcmcia_unregister_socket(&cf->socket);
++	if (cf->detect_pin >= 0) {
++		free_irq(gpio_to_irq(cf->detect_pin), cf);
++		gpio_free(cf->detect_pin);
++	}
++	if (cf->vcc_pin >= 0)
++		gpio_free(cf->vcc_pin);
++	if (cf->reset_pin >= 0)
++		gpio_free(cf->reset_pin);
++
++	release_resource(&cf->res_io);
++	release_resource(&cf->res_mem);
++	release_resource(&cf->res_attr);
++	kfree(cf);
++	platform_set_drvdata(pdev, NULL);
++
++	return 0;
++}
++
++static struct platform_driver at32_cf_driver = {
++	.remove		= __exit_p(at32_cf_remove),
++	.driver		= {
++		.name	= "at32_cf",
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init at32_cf_init(void)
++{
++	int ret;
++
++	ret = platform_driver_probe(&at32_cf_driver, at32_cf_probe);
++	if (ret)
++		printk(KERN_ERR "at32_cf: probe failed: %d\n", ret);
++	return ret;
++}
++
++static void __exit at32_cf_exit(void)
++{
++	platform_driver_unregister(&at32_cf_driver);
++}
++
++module_init(at32_cf_init);
++module_exit(at32_cf_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Driver for SMC PCMCIA interface");
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+diff -Nrup linux-2.6.24/drivers/pcmcia/Kconfig linux-avr32/drivers/pcmcia/Kconfig
+--- linux-2.6.24/drivers/pcmcia/Kconfig	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/pcmcia/Kconfig	2008-02-01 14:51:42.000000000 -0500
+@@ -276,6 +276,13 @@ config ELECTRA_CF
+ 	  Say Y here to support the CompactFlash controller on the
+ 	  PA Semi Electra eval board.
+ 
++config AT32_CF
++	tristate "AT32AP CompactFlash Controller"
++	depends on PCMCIA && AVR32 && PLATFORM_AT32AP
++	help
++	  Say Y here to support the CompactFlash controller on AT32 chips.
++	  Or choose M to compile the driver as a module named "at32_cf".
++
+ config PCCARD_NONSTATIC
+ 	tristate
+ 
+diff -Nrup linux-2.6.24/drivers/pcmcia/Makefile linux-avr32/drivers/pcmcia/Makefile
+--- linux-2.6.24/drivers/pcmcia/Makefile	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/pcmcia/Makefile	2008-02-01 14:51:42.000000000 -0500
+@@ -38,6 +38,7 @@ obj-$(CONFIG_PCMCIA_VRC4173)			+= vrc417
+ obj-$(CONFIG_OMAP_CF)				+= omap_cf.o
+ obj-$(CONFIG_AT91_CF)				+= at91_cf.o
+ obj-$(CONFIG_ELECTRA_CF)			+= electra_cf.o
++obj-$(CONFIG_AT32_CF)				+= at32_cf.o
+ 
+ sa11xx_core-y					+= soc_common.o sa11xx_base.o
+ pxa2xx_core-y					+= soc_common.o pxa2xx_base.o
+diff -Nrup linux-2.6.24/drivers/spi/atmel_spi.c linux-avr32/drivers/spi/atmel_spi.c
+--- linux-2.6.24/drivers/spi/atmel_spi.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/spi/atmel_spi.c	2008-02-01 14:51:43.000000000 -0500
+@@ -51,7 +51,9 @@ struct atmel_spi {
+ 	u8			stopping;
+ 	struct list_head	queue;
+ 	struct spi_transfer	*current_transfer;
+-	unsigned long		remaining_bytes;
++	unsigned long		current_remaining_bytes;
++	struct spi_transfer	*next_transfer;
++	unsigned long		next_remaining_bytes;
+ 
+ 	void			*buffer;
+ 	dma_addr_t		buffer_dma;
+@@ -121,6 +123,48 @@ static void cs_deactivate(struct atmel_s
+ 		gpio_set_value(gpio, !active);
+ }
+ 
++static inline int atmel_spi_xfer_is_last(struct spi_message *msg,
++					struct spi_transfer *xfer)
++{
++	return msg->transfers.prev == &xfer->transfer_list;
++}
++
++static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer)
++{
++	return xfer->delay_usecs == 0 && !xfer->cs_change;
++}
++
++static void atmel_spi_next_xfer_data(struct spi_master *master,
++				struct spi_transfer *xfer,
++				dma_addr_t *tx_dma,
++				dma_addr_t *rx_dma,
++				u32 *plen)
++{
++	struct atmel_spi	*as = spi_master_get_devdata(master);
++	u32			len = *plen;
++
++	/* use scratch buffer only when rx or tx data is unspecified */
++	if (xfer->rx_buf)
++		*rx_dma = xfer->rx_dma + xfer->len - len;
++	else {
++		*rx_dma = as->buffer_dma;
++		if (len > BUFFER_SIZE)
++			len = BUFFER_SIZE;
++	}
++	if (xfer->tx_buf)
++		*tx_dma = xfer->tx_dma + xfer->len - len;
++	else {
++		*tx_dma = as->buffer_dma;
++		if (len > BUFFER_SIZE)
++			len = BUFFER_SIZE;
++		memset(as->buffer, 0, len);
++		dma_sync_single_for_device(&as->pdev->dev,
++				as->buffer_dma, len, DMA_TO_DEVICE);
++	}
++
++	*plen = len;
++}
++
+ /*
+  * Submit next transfer for DMA.
+  * lock is held, spi irq is blocked
+@@ -130,53 +174,78 @@ static void atmel_spi_next_xfer(struct s
+ {
+ 	struct atmel_spi	*as = spi_master_get_devdata(master);
+ 	struct spi_transfer	*xfer;
+-	u32			len;
++	u32			len, remaining, total;
+ 	dma_addr_t		tx_dma, rx_dma;
+ 
+-	xfer = as->current_transfer;
+-	if (!xfer || as->remaining_bytes == 0) {
+-		if (xfer)
+-			xfer = list_entry(xfer->transfer_list.next,
+-					struct spi_transfer, transfer_list);
+-		else
+-			xfer = list_entry(msg->transfers.next,
+-					struct spi_transfer, transfer_list);
+-		as->remaining_bytes = xfer->len;
+-		as->current_transfer = xfer;
++	if (!as->current_transfer)
++		xfer = list_entry(msg->transfers.next,
++				struct spi_transfer, transfer_list);
++	else if (!as->next_transfer)
++		xfer = list_entry(as->current_transfer->transfer_list.next,
++				struct spi_transfer, transfer_list);
++	else
++		xfer = NULL;
++
++	if (xfer) {
++		len = xfer->len;
++		atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
++		remaining = xfer->len - len;
++
++		spi_writel(as, RPR, rx_dma);
++		spi_writel(as, TPR, tx_dma);
++
++		if (msg->spi->bits_per_word > 8)
++			len >>= 1;
++		spi_writel(as, RCR, len);
++		spi_writel(as, TCR, len);
++
++		dev_dbg(&msg->spi->dev,
++			"  start xfer %p: len %u tx %p/%08x rx %p/%08x\n",
++			xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
++			xfer->rx_buf, xfer->rx_dma);
++	} else {
++		xfer = as->next_transfer;
++		remaining = as->next_remaining_bytes;
+ 	}
+ 
+-	len = as->remaining_bytes;
++	as->current_transfer = xfer;
++	as->current_remaining_bytes = remaining;
+ 
+-	tx_dma = xfer->tx_dma + xfer->len - len;
+-	rx_dma = xfer->rx_dma + xfer->len - len;
++	if (remaining > 0)
++		len = remaining;
++	else if (!atmel_spi_xfer_is_last(msg, xfer)
++			&& atmel_spi_xfer_can_be_chained(xfer)) {
++		xfer = list_entry(xfer->transfer_list.next,
++				struct spi_transfer, transfer_list);
++		len = xfer->len;
++	} else
++		xfer = NULL;
+ 
+-	/* use scratch buffer only when rx or tx data is unspecified */
+-	if (!xfer->rx_buf) {
+-		rx_dma = as->buffer_dma;
+-		if (len > BUFFER_SIZE)
+-			len = BUFFER_SIZE;
+-	}
+-	if (!xfer->tx_buf) {
+-		tx_dma = as->buffer_dma;
+-		if (len > BUFFER_SIZE)
+-			len = BUFFER_SIZE;
+-		memset(as->buffer, 0, len);
+-		dma_sync_single_for_device(&as->pdev->dev,
+-				as->buffer_dma, len, DMA_TO_DEVICE);
+-	}
++	as->next_transfer = xfer;
+ 
+-	spi_writel(as, RPR, rx_dma);
+-	spi_writel(as, TPR, tx_dma);
++	if (xfer) {
++		total = len;
++		atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
++		as->next_remaining_bytes = total - len;
++
++		spi_writel(as, RNPR, rx_dma);
++		spi_writel(as, TNPR, tx_dma);
++
++		if (msg->spi->bits_per_word > 8)
++			len >>= 1;
++		spi_writel(as, RNCR, len);
++		spi_writel(as, TNCR, len);
++
++		dev_dbg(&msg->spi->dev,
++			"  next xfer %p: len %u tx %p/%08x rx %p/%08x\n",
++			xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
++			xfer->rx_buf, xfer->rx_dma);
++	} else {
++		spi_writel(as, RNCR, 0);
++		spi_writel(as, TNCR, 0);
++	}
+ 
+-	as->remaining_bytes -= len;
+-	if (msg->spi->bits_per_word > 8)
+-		len >>= 1;
+-
+-	/* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer"
+-	 * mechanism might help avoid the IRQ latency between transfers
+-	 * (and improve the nCS0 errata handling on at91rm9200 chips)
+-	 *
+-	 * We're also waiting for ENDRX before we start the next
++	/* REVISIT: We're waiting for ENDRX before we start the next
+ 	 * transfer because we need to handle some difficult timing
+ 	 * issues otherwise. If we wait for ENDTX in one transfer and
+ 	 * then starts waiting for ENDRX in the next, it's difficult
+@@ -186,17 +255,7 @@ static void atmel_spi_next_xfer(struct s
+ 	 *
+ 	 * It should be doable, though. Just not now...
+ 	 */
+-	spi_writel(as, TNCR, 0);
+-	spi_writel(as, RNCR, 0);
+ 	spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
+-
+-	dev_dbg(&msg->spi->dev,
+-		"  start xfer %p: len %u tx %p/%08x rx %p/%08x imr %03x\n",
+-		xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
+-		xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR));
+-
+-	spi_writel(as, RCR, len);
+-	spi_writel(as, TCR, len);
+ 	spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
+ }
+ 
+@@ -294,6 +353,7 @@ atmel_spi_msg_done(struct spi_master *ma
+ 	spin_lock(&as->lock);
+ 
+ 	as->current_transfer = NULL;
++	as->next_transfer = NULL;
+ 
+ 	/* continue if needed */
+ 	if (list_empty(&as->queue) || as->stopping)
+@@ -377,7 +437,7 @@ atmel_spi_interrupt(int irq, void *dev_i
+ 
+ 		spi_writel(as, IDR, pending);
+ 
+-		if (as->remaining_bytes == 0) {
++		if (as->current_remaining_bytes == 0) {
+ 			msg->actual_length += xfer->len;
+ 
+ 			if (!msg->is_dma_mapped)
+@@ -387,7 +447,7 @@ atmel_spi_interrupt(int irq, void *dev_i
+ 			if (xfer->delay_usecs)
+ 				udelay(xfer->delay_usecs);
+ 
+-			if (msg->transfers.prev == &xfer->transfer_list) {
++			if (atmel_spi_xfer_is_last(msg, xfer)) {
+ 				/* report completed message */
+ 				atmel_spi_msg_done(master, as, msg, 0,
+ 						xfer->cs_change);
+@@ -490,9 +550,14 @@ static int atmel_spi_setup(struct spi_de
+ 	if (!(spi->mode & SPI_CPHA))
+ 		csr |= SPI_BIT(NCPHA);
+ 
+-	/* TODO: DLYBS and DLYBCT */
+-	csr |= SPI_BF(DLYBS, 10);
+-	csr |= SPI_BF(DLYBCT, 10);
++	/* DLYBS is mostly irrelevant since we manage chipselect using GPIOs.
++	 *
++	 * DLYBCT would add delays between words, slowing down transfers.
++	 * It could potentially be useful to cope with DMA bottlenecks, but
++	 * in those cases it's probably best to just use a lower bitrate.
++	 */
++	csr |= SPI_BF(DLYBS, 0);
++	csr |= SPI_BF(DLYBCT, 0);
+ 
+ 	/* chipselect must have been muxed as GPIO (e.g. in board setup) */
+ 	npcs_pin = (unsigned int)spi->controller_data;
+diff -Nrup linux-2.6.24/drivers/video/atmel_lcdfb.c linux-avr32/drivers/video/atmel_lcdfb.c
+--- linux-2.6.24/drivers/video/atmel_lcdfb.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/video/atmel_lcdfb.c	2008-02-01 14:51:44.000000000 -0500
+@@ -37,7 +37,9 @@
+ #endif
+ 
+ #if defined(CONFIG_ARCH_AT91)
+-#define	ATMEL_LCDFB_FBINFO_DEFAULT	FBINFO_DEFAULT
++#define	ATMEL_LCDFB_FBINFO_DEFAULT	(FBINFO_DEFAULT \
++					 | FBINFO_PARTIAL_PAN_OK \
++					 | FBINFO_HWACCEL_YPAN)
+ 
+ static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
+ 					struct fb_var_screeninfo *var)
+@@ -74,7 +76,7 @@ static struct fb_fix_screeninfo atmel_lc
+ 	.type		= FB_TYPE_PACKED_PIXELS,
+ 	.visual		= FB_VISUAL_TRUECOLOR,
+ 	.xpanstep	= 0,
+-	.ypanstep	= 0,
++	.ypanstep	= 1,
+ 	.ywrapstep	= 0,
+ 	.accel		= FB_ACCEL_NONE,
+ };
+@@ -148,6 +150,8 @@ static int atmel_lcdfb_alloc_video_memor
+ 		return -ENOMEM;
+ 	}
+ 
++	memset(info->screen_base, 0, info->fix.smem_len);
++
+ 	return 0;
+ }
+ 
+@@ -203,6 +207,26 @@ static int atmel_lcdfb_check_var(struct 
+ 	var->transp.offset = var->transp.length = 0;
+ 	var->xoffset = var->yoffset = 0;
+ 
++	/* Saturate vertical and horizontal timings at maximum values */
++	var->vsync_len = min_t(u32, var->vsync_len,
++			(ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1);
++	var->upper_margin = min_t(u32, var->upper_margin,
++			ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET);
++	var->lower_margin = min_t(u32, var->lower_margin,
++			ATMEL_LCDC_VFP);
++	var->right_margin = min_t(u32, var->right_margin,
++			(ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1);
++	var->hsync_len = min_t(u32, var->hsync_len,
++			(ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1);
++	var->left_margin = min_t(u32, var->left_margin,
++			ATMEL_LCDC_HBP + 1);
++
++	/* Some parameters can't be zero */
++	var->vsync_len = max_t(u32, var->vsync_len, 1);
++	var->right_margin = max_t(u32, var->right_margin, 1);
++	var->hsync_len = max_t(u32, var->hsync_len, 1);
++	var->left_margin = max_t(u32, var->left_margin, 1);
++
+ 	switch (var->bits_per_pixel) {
+ 	case 1:
+ 	case 2:
+@@ -516,7 +540,6 @@ static int __init atmel_lcdfb_init_fbinf
+ 	struct fb_info *info = sinfo->info;
+ 	int ret = 0;
+ 
+-	memset_io(info->screen_base, 0, info->fix.smem_len);
+ 	info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
+ 
+ 	dev_info(info->device,
+@@ -645,6 +668,11 @@ static int __init atmel_lcdfb_probe(stru
+ 		info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
+ 		if (!info->screen_base)
+ 			goto release_intmem;
++
++		/*
++		 * Don't clear the framebuffer -- someone may have set
++		 * up a splash image.
++		 */
+ 	} else {
+ 		/* alocate memory buffer */
+ 		ret = atmel_lcdfb_alloc_video_memory(sinfo);
+diff -Nrup linux-2.6.24/drivers/video/console/Kconfig linux-avr32/drivers/video/console/Kconfig
+--- linux-2.6.24/drivers/video/console/Kconfig	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/video/console/Kconfig	2008-02-01 14:51:44.000000000 -0500
+@@ -6,7 +6,7 @@ menu "Console display driver support"
+ 
+ config VGA_CONSOLE
+ 	bool "VGA text console" if EMBEDDED || !X86
+-	depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN
++	depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN && !AVR32
+ 	default y
+ 	help
+ 	  Saying Y here will allow you to use Linux in text mode through a
+diff -Nrup linux-2.6.24/drivers/watchdog/Kconfig linux-avr32/drivers/watchdog/Kconfig
+--- linux-2.6.24/drivers/watchdog/Kconfig	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/watchdog/Kconfig	2008-02-01 14:51:44.000000000 -0500
+@@ -223,7 +223,7 @@ config DAVINCI_WATCHDOG
+ 
+ config AT32AP700X_WDT
+ 	tristate "AT32AP700x watchdog"
+-	depends on CPU_AT32AP7000
++	depends on CPU_AT32AP700X
+ 	help
+ 	  Watchdog timer embedded into AT32AP700x devices. This will reboot
+ 	  your system when the timeout is reached.
+diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/at32ap7000.h linux-avr32/include/asm-avr32/arch-at32ap/at32ap7000.h
+--- linux-2.6.24/include/asm-avr32/arch-at32ap/at32ap7000.h	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/arch-at32ap/at32ap7000.h	1969-12-31 19:00:00.000000000 -0500
+@@ -1,35 +0,0 @@
+-/*
+- * Pin definitions for AT32AP7000.
+- *
+- * Copyright (C) 2006 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-#ifndef __ASM_ARCH_AT32AP7000_H__
+-#define __ASM_ARCH_AT32AP7000_H__
+-
+-#define GPIO_PERIPH_A	0
+-#define GPIO_PERIPH_B	1
+-
+-#define NR_GPIO_CONTROLLERS	4
+-
+-/*
+- * Pin numbers identifying specific GPIO pins on the chip. They can
+- * also be converted to IRQ numbers by passing them through
+- * gpio_to_irq().
+- */
+-#define GPIO_PIOA_BASE	(0)
+-#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
+-#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
+-#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
+-#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
+-
+-#define GPIO_PIN_PA(N)	(GPIO_PIOA_BASE + (N))
+-#define GPIO_PIN_PB(N)	(GPIO_PIOB_BASE + (N))
+-#define GPIO_PIN_PC(N)	(GPIO_PIOC_BASE + (N))
+-#define GPIO_PIN_PD(N)	(GPIO_PIOD_BASE + (N))
+-#define GPIO_PIN_PE(N)	(GPIO_PIOE_BASE + (N))
+-
+-#endif /* __ASM_ARCH_AT32AP7000_H__ */
+diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/at32ap700x.h linux-avr32/include/asm-avr32/arch-at32ap/at32ap700x.h
+--- linux-2.6.24/include/asm-avr32/arch-at32ap/at32ap700x.h	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/include/asm-avr32/arch-at32ap/at32ap700x.h	2008-02-01 14:51:45.000000000 -0500
+@@ -0,0 +1,35 @@
++/*
++ * Pin definitions for AT32AP7000.
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_ARCH_AT32AP700X_H__
++#define __ASM_ARCH_AT32AP700X_H__
++
++#define GPIO_PERIPH_A	0
++#define GPIO_PERIPH_B	1
++
++#define NR_GPIO_CONTROLLERS	4
++
++/*
++ * Pin numbers identifying specific GPIO pins on the chip. They can
++ * also be converted to IRQ numbers by passing them through
++ * gpio_to_irq().
++ */
++#define GPIO_PIOA_BASE	(0)
++#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
++#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
++#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
++#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
++
++#define GPIO_PIN_PA(N)	(GPIO_PIOA_BASE + (N))
++#define GPIO_PIN_PB(N)	(GPIO_PIOB_BASE + (N))
++#define GPIO_PIN_PC(N)	(GPIO_PIOC_BASE + (N))
++#define GPIO_PIN_PD(N)	(GPIO_PIOD_BASE + (N))
++#define GPIO_PIN_PE(N)	(GPIO_PIOE_BASE + (N))
++
++#endif /* __ASM_ARCH_AT32AP700X_H__ */
+diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/board.h linux-avr32/include/asm-avr32/arch-at32ap/board.h
+--- linux-2.6.24/include/asm-avr32/arch-at32ap/board.h	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/arch-at32ap/board.h	2008-02-01 14:51:45.000000000 -0500
+@@ -51,6 +51,9 @@ struct platform_device *
+ at32_add_device_ide(unsigned int id, unsigned int extint,
+ 		    struct ide_platform_data *data);
+ 
++/* mask says which PWM channels to mux */
++struct platform_device *at32_add_device_pwm(u32 mask);
++
+ /* depending on what's hooked up, not all SSC pins will be used */
+ #define	ATMEL_SSC_TK		0x01
+ #define	ATMEL_SSC_TF		0x02
+@@ -66,7 +69,13 @@ struct platform_device *
+ at32_add_device_ssc(unsigned int id, unsigned int flags);
+ 
+ struct platform_device *at32_add_device_twi(unsigned int id);
+-struct platform_device *at32_add_device_mci(unsigned int id);
++
++struct mci_platform_data {
++	int detect_pin;
++	int wp_pin;
++};
++struct platform_device *
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
+ struct platform_device *at32_add_device_ac97c(unsigned int id);
+ struct platform_device *at32_add_device_abdac(unsigned int id);
+ 
+diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/cpu.h linux-avr32/include/asm-avr32/arch-at32ap/cpu.h
+--- linux-2.6.24/include/asm-avr32/arch-at32ap/cpu.h	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/arch-at32ap/cpu.h	2008-02-01 14:51:45.000000000 -0500
+@@ -14,7 +14,7 @@
+  * Only AT32AP7000 is defined for now. We can identify the specific
+  * chip at runtime, but I'm not sure if it's really worth it.
+  */
+-#ifdef CONFIG_CPU_AT32AP7000
++#ifdef CONFIG_CPU_AT32AP700X
+ # define cpu_is_at32ap7000()	(1)
+ #else
+ # define cpu_is_at32ap7000()	(0)
+diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/io.h linux-avr32/include/asm-avr32/arch-at32ap/io.h
+--- linux-2.6.24/include/asm-avr32/arch-at32ap/io.h	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/arch-at32ap/io.h	2008-02-01 14:51:45.000000000 -0500
+@@ -4,7 +4,7 @@
+ /* For "bizarre" halfword swapping */
+ #include <linux/byteorder/swabb.h>
+ 
+-#if defined(CONFIG_AP7000_32_BIT_SMC)
++#if defined(CONFIG_AP700X_32_BIT_SMC)
+ # define __swizzle_addr_b(addr)	(addr ^ 3UL)
+ # define __swizzle_addr_w(addr)	(addr ^ 2UL)
+ # define __swizzle_addr_l(addr)	(addr)
+@@ -14,7 +14,7 @@
+ # define __mem_ioswabb(a, x)	(x)
+ # define __mem_ioswabw(a, x)	swab16(x)
+ # define __mem_ioswabl(a, x)	swab32(x)
+-#elif defined(CONFIG_AP7000_16_BIT_SMC)
++#elif defined(CONFIG_AP700X_16_BIT_SMC)
+ # define __swizzle_addr_b(addr)	(addr ^ 1UL)
+ # define __swizzle_addr_w(addr)	(addr)
+ # define __swizzle_addr_l(addr)	(addr)
+diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/portmux.h linux-avr32/include/asm-avr32/arch-at32ap/portmux.h
+--- linux-2.6.24/include/asm-avr32/arch-at32ap/portmux.h	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/arch-at32ap/portmux.h	2008-02-01 14:51:45.000000000 -0500
+@@ -26,4 +26,16 @@ void at32_select_periph(unsigned int pin
+ void at32_select_gpio(unsigned int pin, unsigned long flags);
+ void at32_reserve_pin(unsigned int pin);
+ 
++#ifdef CONFIG_GPIO_DEV
++
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port);
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
++void at32_deselect_pins(unsigned int port, u32 pins);
++
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
++
++#endif /* CONFIG_GPIO_DEV */
++
+ #endif /* __ASM_ARCH_PORTMUX_H__ */
+diff -Nrup linux-2.6.24/include/asm-avr32/dma-controller.h linux-avr32/include/asm-avr32/dma-controller.h
+--- linux-2.6.24/include/asm-avr32/dma-controller.h	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/include/asm-avr32/dma-controller.h	2008-02-01 14:51:45.000000000 -0500
+@@ -0,0 +1,166 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_AVR32_DMA_CONTROLLER_H
++#define __ASM_AVR32_DMA_CONTROLLER_H
++
++#include <linux/device.h>
++
++#define DMA_DIR_MEM_TO_MEM		0x0000
++#define DMA_DIR_MEM_TO_PERIPH		0x0001
++#define DMA_DIR_PERIPH_TO_MEM		0x0002
++#define DMA_DIR_PERIPH_TO_PERIPH	0x0003
++
++#define DMA_WIDTH_8BIT			0
++#define DMA_WIDTH_16BIT			1
++#define DMA_WIDTH_32BIT			2
++
++struct dma_request {
++	struct dma_controller *dmac;
++	struct list_head list;
++
++	unsigned short channel;
++
++	void (*xfer_complete)(struct dma_request *req);
++	void (*block_complete)(struct dma_request *req);
++	void (*error)(struct dma_request *req);
++};
++
++struct dma_request_sg {
++	struct dma_request req;
++
++	int nr_sg;
++	struct scatterlist *sg;
++	unsigned long block_size;
++	unsigned int nr_blocks;
++
++	dma_addr_t data_reg;
++	unsigned short periph_id;
++
++	unsigned char direction;
++	unsigned char width;
++};
++#define to_dma_request_sg(_req)				\
++	container_of(_req, struct dma_request_sg, req)
++
++struct dma_request_cyclic {
++	struct dma_request req;
++
++        int periods;
++	unsigned long buffer_size;
++
++        dma_addr_t buffer_start;
++	dma_addr_t data_reg;
++
++	unsigned short periph_id;
++	unsigned char direction;
++	unsigned char width;
++
++        void *dev_id;
++};
++#define to_dma_request_cyclic(_req)				\
++	container_of(_req, struct dma_request_cyclic, req)
++
++struct dma_request_memcpy {
++	struct dma_request req;
++
++	dma_addr_t src_addr;
++	unsigned int src_width;
++	unsigned int src_stride;
++
++	dma_addr_t dst_addr;
++	unsigned int dst_width;
++	unsigned int dst_stride;
++
++	size_t length;
++
++	unsigned short src_reverse:1;
++	unsigned short dst_reverse:1;
++};
++#define to_dma_request_memcpy(_req)				\
++	container_of(_req, struct dma_request_memcpy, req)
++
++struct dma_controller {
++	struct list_head list;
++	int id;
++	struct device *dev;
++
++	int (*alloc_channel)(struct dma_controller *dmac);
++	void (*release_channel)(struct dma_controller *dmac,
++				int channel);
++	int (*prepare_request_sg)(struct dma_controller *dmac,
++				  struct dma_request_sg *req);
++        int (*prepare_request_cyclic)(struct dma_controller *dmac,
++				      struct dma_request_cyclic *req);
++	int (*prepare_request_memcpy)(struct dma_controller *dmac,
++				      struct dma_request_memcpy *req);
++	int (*start_request)(struct dma_controller *dmac,
++			     unsigned int channel);
++	int (*stop_request)(struct dma_controller *dmac,
++                            unsigned int channel);
++        dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
++                                      unsigned int channel);
++};
++
++static inline int
++dma_alloc_channel(struct dma_controller *dmac)
++{
++	return dmac->alloc_channel(dmac);
++}
++
++static inline void
++dma_release_channel(struct dma_controller *dmac, int chan)
++{
++	dmac->release_channel(dmac, chan);
++}
++
++static inline int
++dma_prepare_request_sg(struct dma_controller *dmac,
++		       struct dma_request_sg *req)
++{
++	return dmac->prepare_request_sg(dmac, req);
++}
++
++static inline int
++dma_prepare_request_cyclic(struct dma_controller *dmac,
++			   struct dma_request_cyclic *req)
++{
++	return dmac->prepare_request_cyclic(dmac, req);
++}
++
++static inline int
++dma_prepare_request_memcpy(struct dma_controller *dmac,
++			   struct dma_request_memcpy *req)
++{
++	return dmac->prepare_request_memcpy(dmac, req);
++}
++
++static inline int
++dma_start_request(struct dma_controller *dmac,
++		  unsigned int channel)
++{
++	return dmac->start_request(dmac, channel);
++}
++
++static inline int
++dma_stop_request(struct dma_controller *dmac,
++                 unsigned int channel)
++{
++	return dmac->stop_request(dmac, channel);
++}
++
++static inline dma_addr_t
++dma_get_current_pos(struct dma_controller *dmac,
++                    unsigned int channel)
++{
++	return dmac->get_current_pos(dmac, channel);
++}
++
++extern int register_dma_controller(struct dma_controller *dmac);
++extern struct dma_controller *find_dma_controller(int id);
++
++#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
+diff -Nrup linux-2.6.24/include/asm-avr32/irq.h linux-avr32/include/asm-avr32/irq.h
+--- linux-2.6.24/include/asm-avr32/irq.h	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/irq.h	2008-02-01 14:51:45.000000000 -0500
+@@ -11,4 +11,9 @@
+ 
+ #define irq_canonicalize(i)	(i)
+ 
++#ifndef __ASSEMBLER__
++int nmi_enable(void);
++void nmi_disable(void);
++#endif
++
+ #endif /* __ASM_AVR32_IOCTLS_H */
+diff -Nrup linux-2.6.24/include/asm-avr32/kdebug.h linux-avr32/include/asm-avr32/kdebug.h
+--- linux-2.6.24/include/asm-avr32/kdebug.h	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/kdebug.h	2008-02-01 14:51:45.000000000 -0500
+@@ -5,6 +5,7 @@
+ enum die_val {
+ 	DIE_BREAKPOINT,
+ 	DIE_SSTEP,
++	DIE_NMI,
+ };
+ 
+ #endif /* __ASM_AVR32_KDEBUG_H */
+diff -Nrup linux-2.6.24/include/asm-avr32/ocd.h linux-avr32/include/asm-avr32/ocd.h
+--- linux-2.6.24/include/asm-avr32/ocd.h	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/ocd.h	2008-02-01 14:51:45.000000000 -0500
+@@ -533,6 +533,11 @@ static inline void __ocd_write(unsigned 
+ #define ocd_read(reg)			__ocd_read(OCD_##reg)
+ #define ocd_write(reg, value)		__ocd_write(OCD_##reg, value)
+ 
++struct task_struct;
++
++void ocd_enable(struct task_struct *child);
++void ocd_disable(struct task_struct *child);
++
+ #endif /* !__ASSEMBLER__ */
+ 
+ #endif /* __ASM_AVR32_OCD_H */
+diff -Nrup linux-2.6.24/include/asm-avr32/processor.h linux-avr32/include/asm-avr32/processor.h
+--- linux-2.6.24/include/asm-avr32/processor.h	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/processor.h	2008-02-01 14:51:45.000000000 -0500
+@@ -57,11 +57,25 @@ struct avr32_cpuinfo {
+ 	unsigned short cpu_revision;
+ 	enum tlb_config tlb_config;
+ 	unsigned long features;
++	u32 device_id;
+ 
+ 	struct cache_info icache;
+ 	struct cache_info dcache;
+ };
+ 
++static inline unsigned int avr32_get_manufacturer_id(struct avr32_cpuinfo *cpu)
++{
++	return (cpu->device_id >> 1) & 0x7f;
++}
++static inline unsigned int avr32_get_product_number(struct avr32_cpuinfo *cpu)
++{
++	return (cpu->device_id >> 12) & 0xffff;
++}
++static inline unsigned int avr32_get_chip_revision(struct avr32_cpuinfo *cpu)
++{
++	return (cpu->device_id >> 28) & 0x0f;
++}
++
+ extern struct avr32_cpuinfo boot_cpu_data;
+ 
+ #ifdef CONFIG_SMP
+diff -Nrup linux-2.6.24/include/asm-avr32/ptrace.h linux-avr32/include/asm-avr32/ptrace.h
+--- linux-2.6.24/include/asm-avr32/ptrace.h	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/ptrace.h	2008-02-01 14:51:45.000000000 -0500
+@@ -121,7 +121,15 @@ struct pt_regs {
+ };
+ 
+ #ifdef __KERNEL__
+-# define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER)
++
++#include <asm/ocd.h>
++
++#define arch_ptrace_attach(child)       ocd_enable(child)
++
++#define user_mode(regs)                 (((regs)->sr & MODE_MASK) == MODE_USER)
++#define instruction_pointer(regs)       ((regs)->pc)
++#define profile_pc(regs)                instruction_pointer(regs)
++
+ extern void show_regs (struct pt_regs *);
+ 
+ static __inline__ int valid_user_regs(struct pt_regs *regs)
+@@ -141,9 +149,6 @@ static __inline__ int valid_user_regs(st
+ 	return 0;
+ }
+ 
+-#define instruction_pointer(regs) ((regs)->pc)
+-
+-#define profile_pc(regs) instruction_pointer(regs)
+ 
+ #endif /* __KERNEL__ */
+ 
+diff -Nrup linux-2.6.24/include/asm-avr32/thread_info.h linux-avr32/include/asm-avr32/thread_info.h
+--- linux-2.6.24/include/asm-avr32/thread_info.h	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/thread_info.h	2008-02-01 14:51:45.000000000 -0500
+@@ -88,6 +88,7 @@ static inline struct thread_info *curren
+ #define TIF_MEMDIE		6
+ #define TIF_RESTORE_SIGMASK	7	/* restore signal mask in do_signal */
+ #define TIF_CPU_GOING_TO_SLEEP	8	/* CPU is entering sleep 0 mode */
++#define TIF_DEBUG		30	/* debugging enabled */
+ #define TIF_USERSPACE		31      /* true if FS sets userspace */
+ 
+ #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+diff -Nrup linux-2.6.24/include/linux/atmel_pwm.h linux-avr32/include/linux/atmel_pwm.h
+--- linux-2.6.24/include/linux/atmel_pwm.h	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/include/linux/atmel_pwm.h	2008-02-01 14:51:47.000000000 -0500
+@@ -0,0 +1,70 @@
++#ifndef __LINUX_ATMEL_PWM_H
++#define __LINUX_ATMEL_PWM_H
++
++/**
++ * struct pwm_channel - driver handle to a PWM channel
++ * @regs: base of this channel's registers
++ * @index: number of this channel (0..31)
++ * @mck: base clock rate, which can be prescaled and maybe subdivided
++ *
++ * Drivers initialize a pwm_channel structure using pwm_channel_alloc().
++ * Then they configure its clock rate (derived from MCK), alignment,
++ * polarity, and duty cycle by writing directly to the channel registers,
++ * before enabling the channel by calling pwm_channel_enable().
++ *
++ * After emitting a PWM signal for the desired length of time, drivers
++ * may then pwm_channel_disable() or pwm_channel_free().  Both of these
++ * disable the channel, but when it's freed the IRQ is deconfigured and
++ * the channel must later be re-allocated and reconfigured.
++ *
++ * Note that if the period or duty cycle need to be changed while the
++ * PWM channel is operating, drivers must use the PWM_CUPD double buffer
++ * mechanism, either polling until they change or getting implicitly
++ * notified through a once-per-period interrupt handler.
++ */
++struct pwm_channel {
++	void __iomem	*regs;
++	unsigned	index;
++	unsigned long	mck;
++};
++
++extern int pwm_channel_alloc(int index, struct pwm_channel *ch);
++extern int pwm_channel_free(struct pwm_channel *ch);
++
++extern int pwm_clk_alloc(unsigned prescale, unsigned div);
++extern void pwm_clk_free(unsigned clk);
++
++extern int __pwm_channel_onoff(struct pwm_channel *ch, int enabled);
++
++#define pwm_channel_enable(ch)	__pwm_channel_onoff((ch), 1)
++#define pwm_channel_disable(ch)	__pwm_channel_onoff((ch), 0)
++
++/* periodic interrupts, mostly for CUPD changes to period or cycle */
++extern int pwm_channel_handler(struct pwm_channel *ch,
++		void (*handler)(struct pwm_channel *ch));
++
++/* per-channel registers (banked at pwm_channel->regs) */
++#define PWM_CMR		0x00		/* mode register */
++#define		PWM_CPR_CPD	(1 << 10)	/* set: CUPD modifies period */
++#define		PWM_CPR_CPOL	(1 << 9)	/* set: idle high */
++#define		PWM_CPR_CALG	(1 << 8)	/* set: center align */
++#define		PWM_CPR_CPRE	(0xf << 0)	/* mask: rate is mck/(2^pre) */
++#define		PWM_CPR_CLKA	(0xb << 0)	/* rate CLKA */
++#define		PWM_CPR_CLKB	(0xc << 0)	/* rate CLKB */
++#define PWM_CDTY	0x04		/* duty cycle (max of CPRD) */
++#define PWM_CPRD	0x08		/* period (count up from zero) */
++#define PWM_CCNT	0x0c		/* counter (20 bits?) */
++#define PWM_CUPD	0x10		/* update CPRD (or CDTY) next period */
++
++static inline void
++pwm_channel_writel(struct pwm_channel *pwmc, unsigned offset, u32 val)
++{
++	__raw_writel(val, pwmc->regs + offset);
++}
++
++static inline u32 pwm_channel_readl(struct pwm_channel *pwmc, unsigned offset)
++{
++	return __raw_readl(pwmc->regs + offset);
++}
++
++#endif /* __LINUX_ATMEL_PWM_H */
+diff -Nrup linux-2.6.24/include/video/atmel_lcdc.h linux-avr32/include/video/atmel_lcdc.h
+--- linux-2.6.24/include/video/atmel_lcdc.h	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/video/atmel_lcdc.h	2008-02-01 14:51:47.000000000 -0500
+@@ -115,20 +115,20 @@ struct atmel_lcdfb_info {
+ #define		ATMEL_LCDC_MEMOR_LITTLE		(1 << 31)
+ 
+ #define ATMEL_LCDC_TIM1		0x0808
+-#define	ATMEL_LCDC_VFP		(0xff <<  0)
++#define	ATMEL_LCDC_VFP		(0xffU <<  0)
+ #define	ATMEL_LCDC_VBP_OFFSET		8
+-#define	ATMEL_LCDC_VBP		(0xff <<  ATMEL_LCDC_VBP_OFFSET)
++#define	ATMEL_LCDC_VBP		(0xffU <<  ATMEL_LCDC_VBP_OFFSET)
+ #define	ATMEL_LCDC_VPW_OFFSET		16
+-#define	ATMEL_LCDC_VPW		(0x3f << ATMEL_LCDC_VPW_OFFSET)
++#define	ATMEL_LCDC_VPW		(0x3fU << ATMEL_LCDC_VPW_OFFSET)
+ #define	ATMEL_LCDC_VHDLY_OFFSET		24
+-#define	ATMEL_LCDC_VHDLY	(0xf  << ATMEL_LCDC_VHDLY_OFFSET)
++#define	ATMEL_LCDC_VHDLY	(0xfU  << ATMEL_LCDC_VHDLY_OFFSET)
+ 
+ #define ATMEL_LCDC_TIM2		0x080c
+-#define	ATMEL_LCDC_HBP		(0xff  <<  0)
++#define	ATMEL_LCDC_HBP		(0xffU  <<  0)
+ #define	ATMEL_LCDC_HPW_OFFSET		8
+-#define	ATMEL_LCDC_HPW		(0x3f  <<  ATMEL_LCDC_HPW_OFFSET)
++#define	ATMEL_LCDC_HPW		(0x3fU  <<  ATMEL_LCDC_HPW_OFFSET)
+ #define	ATMEL_LCDC_HFP_OFFSET		21
+-#define	ATMEL_LCDC_HFP		(0x7ff << ATMEL_LCDC_HFP_OFFSET)
++#define	ATMEL_LCDC_HFP		(0x7ffU << ATMEL_LCDC_HFP_OFFSET)
+ 
+ #define ATMEL_LCDC_LCDFRMCFG	0x0810
+ #define	ATMEL_LCDC_LINEVAL	(0x7ff <<  0)
+diff -Nrup linux-2.6.24/kernel/ptrace.c linux-avr32/kernel/ptrace.c
+--- linux-2.6.24/kernel/ptrace.c	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/kernel/ptrace.c	2008-02-01 14:51:47.000000000 -0500
+@@ -470,6 +470,8 @@ asmlinkage long sys_ptrace(long request,
+ 	lock_kernel();
+ 	if (request == PTRACE_TRACEME) {
+ 		ret = ptrace_traceme();
++		if (!ret)
++			arch_ptrace_attach(current);
+ 		goto out;
+ 	}
+ 
+diff -Nrup linux-2.6.24/sound/avr32/ac97c.c linux-avr32/sound/avr32/ac97c.c
+--- linux-2.6.24/sound/avr32/ac97c.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/sound/avr32/ac97c.c	2008-02-01 14:51:48.000000000 -0500
+@@ -0,0 +1,914 @@
++/*
++ * Driver for the Atmel AC97 controller
++ *
++ * Copyright (C) 2005-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/mutex.h>
++#include <linux/io.h>
++
++#include <sound/driver.h>
++#include <sound/core.h>
++#include <sound/initval.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/ac97_codec.h>
++#include <sound/memalloc.h>
++
++#include <asm/dma-controller.h>
++
++#include "ac97c.h"
++
++/* Serialize access to opened */
++static DEFINE_MUTEX(opened_mutex);
++
++struct atmel_ac97_dma_info {
++	struct dma_request_cyclic req_tx;
++	struct dma_request_cyclic req_rx;
++	unsigned short rx_periph_id;
++	unsigned short tx_periph_id;
++};
++
++struct atmel_ac97 {
++	/* Serialize access to opened */
++	spinlock_t lock;
++	void __iomem *regs;
++	struct snd_pcm_substream *playback_substream;
++	struct snd_pcm_substream *capture_substream;
++	struct snd_card *card;
++	struct snd_pcm *pcm;
++	struct snd_ac97 *ac97;
++	struct snd_ac97_bus *ac97_bus;
++	int opened;
++	int period;
++	u64 cur_format;
++	unsigned int cur_rate;
++	struct clk *mck;
++	struct platform_device *pdev;
++	struct atmel_ac97_dma_info dma;
++};
++
++#define get_chip(card) ((struct atmel_ac97 *)(card)->private_data)
++
++#define ac97c_writel(chip, reg, val)			\
++	__raw_writel((val), (chip)->regs + AC97C_##reg)
++#define ac97c_readl(chip, reg)				\
++	__raw_readl((chip)->regs + AC97C_##reg)
++
++/*
++ * PCM part
++ */
++static struct snd_pcm_hardware snd_atmel_ac97_playback_hw = {
++	.info			= (SNDRV_PCM_INFO_INTERLEAVED
++				  | SNDRV_PCM_INFO_MMAP
++				  | SNDRV_PCM_INFO_MMAP_VALID
++				  | SNDRV_PCM_INFO_BLOCK_TRANSFER
++				  | SNDRV_PCM_INFO_JOINT_DUPLEX),
++	.formats		= (SNDRV_PCM_FMTBIT_S16_BE
++				  | SNDRV_PCM_FMTBIT_S16_LE),
++	.rates			= (SNDRV_PCM_RATE_CONTINUOUS),
++	.rate_min		= 4000,
++	.rate_max		= 48000,
++	.channels_min		= 1,
++	.channels_max		= 6,
++	.buffer_bytes_max	= 64*1024,
++	.period_bytes_min	= 512,
++	.period_bytes_max	= 4095,
++	.periods_min		= 8,
++	.periods_max		= 1024,
++};
++
++static struct snd_pcm_hardware snd_atmel_ac97_capture_hw = {
++	.info			= (SNDRV_PCM_INFO_INTERLEAVED
++				  | SNDRV_PCM_INFO_MMAP
++				  | SNDRV_PCM_INFO_MMAP_VALID
++				  | SNDRV_PCM_INFO_BLOCK_TRANSFER
++				  | SNDRV_PCM_INFO_JOINT_DUPLEX),
++	.formats		= (SNDRV_PCM_FMTBIT_S16_BE
++				  | SNDRV_PCM_FMTBIT_S16_LE),
++	.rates			= (SNDRV_PCM_RATE_CONTINUOUS),
++	.rate_min		= 4000,
++	.rate_max		= 48000,
++	.channels_min		= 1,
++	.channels_max		= 2,
++	.buffer_bytes_max	= 64*1024,
++	.period_bytes_min	= 512,
++	.period_bytes_max	= 4095,
++	.periods_min		= 8,
++	.periods_max		= 1024,
++};
++
++/*
++ * PCM functions
++ */
++static int
++snd_atmel_ac97_playback_open(struct snd_pcm_substream *substream)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++
++	mutex_lock(&opened_mutex);
++	chip->opened++;
++	runtime->hw = snd_atmel_ac97_playback_hw;
++	if (chip->cur_rate) {
++		runtime->hw.rate_min = chip->cur_rate;
++		runtime->hw.rate_max = chip->cur_rate;
++	}
++	if (chip->cur_format)
++		runtime->hw.formats = (1ULL << chip->cur_format);
++	mutex_unlock(&opened_mutex);
++	chip->playback_substream = substream;
++	chip->period = 0;
++	return 0;
++}
++
++static int
++snd_atmel_ac97_capture_open(struct snd_pcm_substream *substream)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++
++	mutex_lock(&opened_mutex);
++	chip->opened++;
++	runtime->hw = snd_atmel_ac97_capture_hw;
++	if (chip->cur_rate) {
++		runtime->hw.rate_min = chip->cur_rate;
++		runtime->hw.rate_max = chip->cur_rate;
++	}
++	if (chip->cur_format)
++		runtime->hw.formats = (1ULL << chip->cur_format);
++	mutex_unlock(&opened_mutex);
++	chip->capture_substream = substream;
++	chip->period = 0;
++	return 0;
++}
++
++static int snd_atmel_ac97_playback_close(struct snd_pcm_substream *substream)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	mutex_lock(&opened_mutex);
++	chip->opened--;
++	if (!chip->opened) {
++		chip->cur_rate = 0;
++		chip->cur_format = 0;
++	}
++	mutex_unlock(&opened_mutex);
++	return 0;
++}
++
++static int snd_atmel_ac97_capture_close(struct snd_pcm_substream *substream)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	mutex_lock(&opened_mutex);
++	chip->opened--;
++	if (!chip->opened) {
++		chip->cur_rate = 0;
++		chip->cur_format = 0;
++	}
++	mutex_unlock(&opened_mutex);
++	return 0;
++}
++
++static int
++snd_atmel_ac97_playback_hw_params(struct snd_pcm_substream *substream,
++		struct snd_pcm_hw_params *hw_params)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	int err;
++
++	err = snd_pcm_lib_malloc_pages(substream,
++					params_buffer_bytes(hw_params));
++	if (err < 0)
++		return err;
++
++	/* Set restrictions to params */
++	mutex_lock(&opened_mutex);
++	chip->cur_rate = params_rate(hw_params);
++	chip->cur_format = params_format(hw_params);
++	mutex_unlock(&opened_mutex);
++
++	return 0;
++}
++
++static int
++snd_atmel_ac97_capture_hw_params(struct snd_pcm_substream *substream,
++		struct snd_pcm_hw_params *hw_params)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	int err;
++
++	err = snd_pcm_lib_malloc_pages(substream,
++					params_buffer_bytes(hw_params));
++	if (err < 0)
++		return err;
++
++	/* Set restrictions to params */
++	mutex_lock(&opened_mutex);
++	chip->cur_rate = params_rate(hw_params);
++	chip->cur_format = params_format(hw_params);
++	mutex_unlock(&opened_mutex);
++
++	return 0;
++}
++
++static int snd_atmel_ac97_playback_hw_free(struct snd_pcm_substream *substream)
++{
++	return snd_pcm_lib_free_pages(substream);
++}
++
++static int snd_atmel_ac97_capture_hw_free(struct snd_pcm_substream *substream)
++{
++
++	return snd_pcm_lib_free_pages(substream);
++}
++
++static int snd_atmel_ac97_playback_prepare(struct snd_pcm_substream *substream)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	struct platform_device *pdev = chip->pdev;
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	int block_size = frames_to_bytes(runtime, runtime->period_size);
++	unsigned long word = 0;
++	unsigned long buffer_size = 0;
++
++	dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
++			block_size * 2, DMA_TO_DEVICE);
++
++	/* Assign slots to channels */
++	switch (substream->runtime->channels) {
++	case 1:
++		word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
++		break;
++	case 2:
++		/* Assign Left and Right slot to Channel A */
++		word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
++			| AC97C_CH_ASSIGN(PCM_RIGHT, A);
++		break;
++	default:
++		/* TODO: support more than two channels */
++		return -EINVAL;
++		break;
++	}
++	ac97c_writel(chip, OCA, word);
++
++	/* Configure sample format and size */
++	word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
++
++	switch (runtime->format) {
++	case SNDRV_PCM_FORMAT_S16_LE:
++		word |= AC97C_CMR_CEM_LITTLE;
++		break;
++	case SNDRV_PCM_FORMAT_S16_BE: /* fall through */
++	default:
++		word &= ~AC97C_CMR_CEM_LITTLE;
++		break;
++	}
++
++	ac97c_writel(chip, CAMR, word);
++
++	/* Set variable rate if needed */
++	if (runtime->rate != 48000) {
++		word = ac97c_readl(chip, MR);
++		word |= AC97C_MR_VRA;
++		ac97c_writel(chip, MR, word);
++	} else {
++		/* Clear Variable Rate Bit */
++		word = ac97c_readl(chip, MR);
++		word &= ~AC97C_MR_VRA;
++		ac97c_writel(chip, MR, word);
++	}
++
++	/* Set rate */
++	snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
++
++	buffer_size = frames_to_bytes(runtime, runtime->period_size) *
++		runtime->periods;
++
++	chip->dma.req_tx.buffer_size = buffer_size;
++	chip->dma.req_tx.periods = runtime->periods;
++
++	BUG_ON(chip->dma.req_tx.buffer_size !=
++			(chip->dma.req_tx.periods *
++			 frames_to_bytes(runtime, runtime->period_size)));
++
++	chip->dma.req_tx.buffer_start = runtime->dma_addr;
++	chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
++	chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
++	chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
++	chip->dma.req_tx.width = DMA_WIDTH_16BIT;
++	chip->dma.req_tx.dev_id = chip;
++
++	return 0;
++}
++
++static int snd_atmel_ac97_capture_prepare(struct snd_pcm_substream *substream)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	struct platform_device *pdev = chip->pdev;
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	int block_size = frames_to_bytes(runtime, runtime->period_size);
++	unsigned long word = 0;
++	unsigned long buffer_size = 0;
++
++	dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
++			block_size * 2, DMA_FROM_DEVICE);
++
++	/* Assign slots to channels */
++	switch (substream->runtime->channels) {
++	case 1:
++		word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
++		break;
++	case 2:
++		/* Assign Left and Right slot to Channel A */
++		word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
++			| AC97C_CH_ASSIGN(PCM_RIGHT, A);
++		break;
++	default:
++		/* TODO: support more than two channels */
++		return -EINVAL;
++		break;
++	}
++	ac97c_writel(chip, ICA, word);
++
++	/* Configure sample format and size */
++	word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
++
++	switch (runtime->format) {
++	case SNDRV_PCM_FORMAT_S16_LE:
++		word |= AC97C_CMR_CEM_LITTLE;
++		break;
++	case SNDRV_PCM_FORMAT_S16_BE:
++	default:
++		word &= ~(AC97C_CMR_CEM_LITTLE);
++		break;
++	}
++
++	ac97c_writel(chip, CAMR, word);
++
++	/* Set variable rate if needed */
++	if (runtime->rate != 48000) {
++		word = ac97c_readl(chip, MR);
++		word |= AC97C_MR_VRA;
++		ac97c_writel(chip, MR, word);
++	} else {
++		/* Clear Variable Rate Bit */
++		word = ac97c_readl(chip, MR);
++		word &= ~(AC97C_MR_VRA);
++		ac97c_writel(chip, MR, word);
++	}
++
++	/* Set rate */
++	snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
++
++	buffer_size = frames_to_bytes(runtime, runtime->period_size) *
++		runtime->periods;
++
++	chip->dma.req_rx.buffer_size = buffer_size;
++	chip->dma.req_rx.periods = runtime->periods;
++
++	BUG_ON(chip->dma.req_rx.buffer_size !=
++			(chip->dma.req_rx.periods *
++			 frames_to_bytes(runtime, runtime->period_size)));
++
++	chip->dma.req_rx.buffer_start = runtime->dma_addr;
++	chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
++	chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
++	chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
++	chip->dma.req_rx.width = DMA_WIDTH_16BIT;
++	chip->dma.req_rx.dev_id = chip;
++
++	return 0;
++}
++
++	static int
++snd_atmel_ac97_playback_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	unsigned long camr;
++	int flags, err = 0;
++
++	spin_lock_irqsave(&chip->lock, flags);
++	camr = ac97c_readl(chip, CAMR);
++
++	switch (cmd) {
++	case SNDRV_PCM_TRIGGER_START:
++		err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
++				&chip->dma.req_tx);
++		dma_start_request(chip->dma.req_tx.req.dmac,
++				chip->dma.req_tx.req.channel);
++		camr |= AC97C_CMR_CENA;
++		break;
++	case SNDRV_PCM_TRIGGER_STOP:
++		err = dma_stop_request(chip->dma.req_tx.req.dmac,
++				chip->dma.req_tx.req.channel);
++		if (chip->opened <= 1)
++			camr &= ~AC97C_CMR_CENA;
++		break;
++	default:
++		err = -EINVAL;
++		break;
++	}
++
++	ac97c_writel(chip, CAMR, camr);
++
++	spin_unlock_irqrestore(&chip->lock, flags);
++	return err;
++}
++
++	static int
++snd_atmel_ac97_capture_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	unsigned long camr;
++	int flags, err = 0;
++
++	spin_lock_irqsave(&chip->lock, flags);
++	camr = ac97c_readl(chip, CAMR);
++
++	switch (cmd) {
++	case SNDRV_PCM_TRIGGER_START:
++		err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
++				&chip->dma.req_rx);
++		dma_start_request(chip->dma.req_rx.req.dmac,
++				chip->dma.req_rx.req.channel);
++		camr |= AC97C_CMR_CENA;
++		break;
++	case SNDRV_PCM_TRIGGER_STOP:
++		err = dma_stop_request(chip->dma.req_rx.req.dmac,
++				chip->dma.req_rx.req.channel);
++		mutex_lock(&opened_mutex);
++		if (chip->opened <= 1)
++			camr &= ~AC97C_CMR_CENA;
++		mutex_unlock(&opened_mutex);
++		break;
++	default:
++		err = -EINVAL;
++		break;
++	}
++
++	ac97c_writel(chip, CAMR, camr);
++
++	spin_unlock_irqrestore(&chip->lock, flags);
++	return err;
++}
++
++	static snd_pcm_uframes_t
++snd_atmel_ac97_playback_pointer(struct snd_pcm_substream *substream)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	snd_pcm_uframes_t pos;
++	unsigned long bytes;
++
++	bytes = (dma_get_current_pos
++			(chip->dma.req_tx.req.dmac,
++			 chip->dma.req_tx.req.channel) - runtime->dma_addr);
++	pos = bytes_to_frames(runtime, bytes);
++	if (pos >= runtime->buffer_size)
++		pos -= runtime->buffer_size;
++
++	return pos;
++}
++
++	static snd_pcm_uframes_t
++snd_atmel_ac97_capture_pointer(struct snd_pcm_substream *substream)
++{
++	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	snd_pcm_uframes_t pos;
++	unsigned long bytes;
++
++	bytes = (dma_get_current_pos
++			(chip->dma.req_rx.req.dmac,
++			 chip->dma.req_rx.req.channel)
++			- runtime->dma_addr);
++	pos = bytes_to_frames(runtime, bytes);
++	if (pos >= runtime->buffer_size)
++		pos -= runtime->buffer_size;
++
++
++	return pos;
++}
++
++static struct snd_pcm_ops atmel_ac97_playback_ops = {
++	.open		= snd_atmel_ac97_playback_open,
++	.close		= snd_atmel_ac97_playback_close,
++	.ioctl		= snd_pcm_lib_ioctl,
++	.hw_params	= snd_atmel_ac97_playback_hw_params,
++	.hw_free	= snd_atmel_ac97_playback_hw_free,
++	.prepare	= snd_atmel_ac97_playback_prepare,
++	.trigger	= snd_atmel_ac97_playback_trigger,
++	.pointer	= snd_atmel_ac97_playback_pointer,
++};
++
++static struct snd_pcm_ops atmel_ac97_capture_ops = {
++	.open		= snd_atmel_ac97_capture_open,
++	.close		= snd_atmel_ac97_capture_close,
++	.ioctl		= snd_pcm_lib_ioctl,
++	.hw_params	= snd_atmel_ac97_capture_hw_params,
++	.hw_free	= snd_atmel_ac97_capture_hw_free,
++	.prepare	= snd_atmel_ac97_capture_prepare,
++	.trigger	= snd_atmel_ac97_capture_trigger,
++	.pointer	= snd_atmel_ac97_capture_pointer,
++};
++
++static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
++	/* Playback */
++	{
++		.exclusive = 1,
++		.r = { {
++			.slots = ((1 << AC97_SLOT_PCM_LEFT)
++					| (1 << AC97_SLOT_PCM_RIGHT)
++					| (1 << AC97_SLOT_PCM_CENTER)
++					| (1 << AC97_SLOT_PCM_SLEFT)
++					| (1 << AC97_SLOT_PCM_SRIGHT)
++					| (1 << AC97_SLOT_LFE)),
++		} }
++	},
++	/* PCM in */
++	{
++		.stream = 1,
++		.exclusive = 1,
++		.r = { {
++			.slots = ((1 << AC97_SLOT_PCM_LEFT)
++					| (1 << AC97_SLOT_PCM_RIGHT)),
++		} }
++	},
++	/* Mic in */
++	{
++		.stream = 1,
++		.exclusive = 1,
++		.r = { {
++			.slots = (1<<AC97_SLOT_MIC),
++		} }
++	},
++};
++
++static int __devinit snd_atmel_ac97_pcm_new(struct atmel_ac97 *chip)
++{
++	struct snd_pcm *pcm;
++	int err;
++
++	err = snd_ac97_pcm_assign(chip->ac97_bus,
++			ARRAY_SIZE(atmel_ac97_pcm_defs),
++			atmel_ac97_pcm_defs);
++	if (err)
++		return err;
++
++	err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
++	if (err)
++		return err;
++
++	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
++			&atmel_ac97_playback_ops);
++
++	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
++			&atmel_ac97_capture_ops);
++
++	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
++			&chip->pdev->dev,
++			128 * 1024, 128 * 1024);
++
++	pcm->private_data = chip;
++	pcm->info_flags = 0;
++	strcpy(pcm->name, "Atmel-AC97");
++	chip->pcm = pcm;
++
++	return 0;
++}
++
++/*
++ * Mixer part.
++ */
++static int snd_atmel_ac97_mixer_new(struct atmel_ac97 *chip)
++{
++	int err;
++	struct snd_ac97_template template;
++
++	memset(&template, 0, sizeof(template));
++	template.private_data = chip;
++	err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
++
++	return err;
++}
++
++static void atmel_ac97_error(struct dma_request *_req)
++{
++	struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
++	struct atmel_ac97 *chip = req->dev_id;
++
++	dev_dbg(&chip->pdev->dev, "DMA Controller error, channel %d\n",
++			req->req.channel);
++}
++
++static void atmel_ac97_block_complete(struct dma_request *_req)
++{
++	struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
++	struct atmel_ac97 *chip = req->dev_id;
++	if (req->periph_id == chip->dma.tx_periph_id)
++		snd_pcm_period_elapsed(chip->playback_substream);
++	else
++		snd_pcm_period_elapsed(chip->capture_substream);
++}
++
++/*
++ * Codec part.
++ */
++static void snd_atmel_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
++		unsigned short val)
++{
++	struct atmel_ac97 *chip = get_chip(ac97);
++	unsigned long word;
++	int timeout = 40;
++
++	word = (reg & 0x7f) << 16 | val;
++
++	do {
++		if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
++			ac97c_writel(chip, COTHR, word);
++			return;
++		}
++		udelay(1);
++	} while (--timeout);
++
++	dev_dbg(&chip->pdev->dev, "codec write timeout\n");
++}
++
++static unsigned short snd_atmel_ac97_read(struct snd_ac97 *ac97,
++		unsigned short reg)
++{
++	struct atmel_ac97 *chip = get_chip(ac97);
++	unsigned long word;
++	int timeout = 40;
++	int write = 10;
++
++	word = (0x80 | (reg & 0x7f)) << 16;
++
++	if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
++		ac97c_readl(chip, CORHR);
++
++retry_write:
++	timeout = 40;
++
++	do {
++		if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
++			ac97c_writel(chip, COTHR, word);
++			goto read_reg;
++		}
++		mdelay(10);
++	} while (--timeout);
++
++	if (!--write)
++		goto timed_out;
++	goto retry_write;
++
++read_reg:
++	do {
++		if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0) {
++			unsigned short val = ac97c_readl(chip, CORHR);
++			return val;
++		}
++		mdelay(10);
++	} while (--timeout);
++
++	if (!--write)
++		goto timed_out;
++	goto retry_write;
++
++timed_out:
++	dev_dbg(&chip->pdev->dev, "codec read timeout\n");
++	return 0xffff;
++}
++
++static void snd_atmel_ac97_reset(struct atmel_ac97 *chip)
++{
++	ac97c_writel(chip, MR, AC97C_MR_WRST);
++	mdelay(1);
++	ac97c_writel(chip, MR, AC97C_MR_ENA);
++}
++
++static void snd_atmel_ac97_destroy(struct snd_card *card)
++{
++	struct atmel_ac97 *chip = get_chip(card);
++
++	if (chip->regs)
++		iounmap(chip->regs);
++
++	if (chip->mck) {
++		clk_disable(chip->mck);
++		clk_put(chip->mck);
++	}
++
++	if (chip->dma.req_tx.req.dmac) {
++		dma_release_channel(chip->dma.req_tx.req.dmac,
++				chip->dma.req_tx.req.channel);
++	}
++	if (chip->dma.req_rx.req.dmac) {
++		dma_release_channel(chip->dma.req_rx.req.dmac,
++				chip->dma.req_rx.req.channel);
++	}
++}
++
++static int __devinit snd_atmel_ac97_create(struct snd_card *card,
++		struct platform_device *pdev)
++{
++	static struct snd_ac97_bus_ops ops = {
++		.write	= snd_atmel_ac97_write,
++		.read	= snd_atmel_ac97_read,
++	};
++	struct atmel_ac97 *chip = get_chip(card);
++	struct resource *regs;
++	struct clk *mck;
++	int err;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs)
++		return -ENXIO;
++
++	mck = clk_get(&pdev->dev, "pclk");
++	if (IS_ERR(mck))
++		return PTR_ERR(mck);
++	clk_enable(mck);
++	chip->mck = mck;
++
++	card->private_free = snd_atmel_ac97_destroy;
++
++	spin_lock_init(&chip->lock);
++	chip->card = card;
++	chip->pdev = pdev;
++
++	chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!chip->regs)
++		return -ENOMEM;
++
++	snd_card_set_dev(card, &pdev->dev);
++
++	err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
++
++	return err;
++}
++
++static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
++{
++	static int dev;
++	struct snd_card *card;
++	struct atmel_ac97 *chip;
++	int err;
++	int ch;
++
++	mutex_init(&opened_mutex);
++
++	err = -ENOMEM;
++	card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
++			THIS_MODULE, sizeof(struct atmel_ac97));
++	if (!card)
++		goto out;
++	chip = get_chip(card);
++
++	err = snd_atmel_ac97_create(card, pdev);
++	if (err)
++		goto out_free_card;
++
++	snd_atmel_ac97_reset(chip);
++
++	err = snd_atmel_ac97_mixer_new(chip);
++	if (err)
++		goto out_free_card;
++
++	err = snd_atmel_ac97_pcm_new(chip);
++	if (err)
++		goto out_free_card;
++
++	/* TODO: Get this information from the platform device */
++	chip->dma.req_tx.req.dmac = find_dma_controller(0);
++	if (!chip->dma.req_tx.req.dmac) {
++		dev_dbg(&chip->pdev->dev, "DMA controller for TX missing\n");
++		err = -ENODEV;
++		goto out_free_card;
++	}
++	chip->dma.req_rx.req.dmac = find_dma_controller(0);
++	if (!chip->dma.req_rx.req.dmac) {
++		dev_dbg(&chip->pdev->dev, "DMA controller for RX missing\n");
++		err = -ENODEV;
++		goto out_free_card;
++	}
++
++	chip->dma.rx_periph_id = 3;
++	chip->dma.tx_periph_id = 4;
++
++	ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
++	if (ch < 0) {
++		dev_dbg(&chip->pdev->dev,
++				"could not allocate TX DMA channel\n");
++		err = ch;
++		goto out_free_card;
++	}
++	chip->dma.req_tx.req.channel = ch;
++	chip->dma.req_tx.width = DMA_WIDTH_16BIT;
++	chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
++	chip->dma.req_tx.req.error = atmel_ac97_error;
++
++	ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
++	if (ch < 0) {
++		dev_dbg(&chip->pdev->dev,
++				"could not allocate RX DMA channel\n");
++		err = ch;
++		goto out_free_card;
++	}
++	chip->dma.req_rx.req.channel = ch;
++	chip->dma.req_rx.width = DMA_WIDTH_16BIT;
++	chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
++	chip->dma.req_rx.req.error = atmel_ac97_error;
++
++	strcpy(card->driver, "atmel_ac97c");
++	strcpy(card->shortname, "atmel_ac97c");
++	sprintf(card->longname, "Atmel AVR32 AC97 controller");
++
++	err = snd_card_register(card);
++	if (err)
++		goto out_free_card;
++
++	platform_set_drvdata(pdev, card);
++	dev++;
++
++	dev_info(&pdev->dev, "Atmel AVR32 AC97 controller at 0x%p\n",
++			chip->regs);
++
++	return 0;
++
++out_free_card:
++	snd_card_free(card);
++out:
++	return err;
++}
++
++#ifdef CONFIG_PM
++	static int
++snd_atmel_ac97_suspend(struct platform_device *pdev, pm_message_t msg)
++{
++	struct snd_card *card = platform_get_drvdata(pdev);
++	struct atmel_ac97 *chip = card->private_data;
++
++	clk_disable(chip->mck);
++
++	return 0;
++}
++
++static int snd_atmel_ac97_resume(struct platform_device *pdev)
++{
++	struct snd_card *card = dev_get_drvdata(pdev);
++	struct atmel_ac97 *chip = card->private_data;
++
++	clk_enable(chip->mck);
++
++	return 0;
++}
++#else
++#define snd_atmel_ac97_suspend NULL
++#define snd_atmel_ac97_resume NULL
++#endif
++
++static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
++{
++	struct snd_card *card = platform_get_drvdata(pdev);
++
++	snd_card_free(card);
++	platform_set_drvdata(pdev, NULL);
++	return 0;
++}
++
++static struct platform_driver atmel_ac97_driver = {
++	.remove		= __devexit_p(snd_atmel_ac97_remove),
++	.driver		= {
++		.name	= "atmel_ac97c",
++	},
++	.suspend	= snd_atmel_ac97_suspend,
++	.resume		= snd_atmel_ac97_resume,
++};
++
++static int __init atmel_ac97_init(void)
++{
++	return platform_driver_probe(&atmel_ac97_driver,
++			snd_atmel_ac97_probe);
++}
++module_init(atmel_ac97_init);
++
++static void __exit atmel_ac97_exit(void)
++{
++	platform_driver_unregister(&atmel_ac97_driver);
++}
++module_exit(atmel_ac97_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+diff -Nrup linux-2.6.24/sound/avr32/ac97c.h linux-avr32/sound/avr32/ac97c.h
+--- linux-2.6.24/sound/avr32/ac97c.h	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/sound/avr32/ac97c.h	2008-02-01 14:51:48.000000000 -0500
+@@ -0,0 +1,71 @@
++/*
++ * Register definitions for the Atmel AC97 Controller.
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __SOUND_AVR32_AC97C_H
++#define __SOUND_AVR32_AC97C_H
++
++#define AC97C_MR		0x08
++#define AC97C_ICA		0x10
++#define AC97C_OCA		0x14
++#define AC97C_CARHR		0x20
++#define AC97C_CATHR		0x24
++#define AC97C_CASR		0x28
++#define AC97C_CAMR		0x2c
++#define AC97C_CBRHR		0x30
++#define AC97C_CBTHR		0x34
++#define AC97C_CBSR		0x38
++#define AC97C_CBMR		0x3c
++#define AC97C_CORHR		0x40
++#define AC97C_COTHR		0x44
++#define AC97C_COSR		0x48
++#define AC97C_COMR		0x4c
++#define AC97C_SR		0x50
++#define AC97C_IER		0x54
++#define AC97C_IDR		0x58
++#define AC97C_IMR		0x5c
++#define AC97C_VERSION		0xfc
++
++#define AC97C_CATPR		PDC_TPR
++#define AC97C_CATCR		PDC_TCR
++#define AC97C_CATNPR		PDC_TNPR
++#define AC97C_CATNCR		PDC_TNCR
++#define AC97C_CARPR		PDC_RPR
++#define AC97C_CARCR		PDC_RCR
++#define AC97C_CARNPR		PDC_RNPR
++#define AC97C_CARNCR		PDC_RNCR
++#define AC97C_PTCR		PDC_PTCR
++
++#define AC97C_MR_ENA		(1 << 0)
++#define AC97C_MR_WRST		(1 << 1)
++#define AC97C_MR_VRA		(1 << 2)
++
++#define AC97C_CSR_TXRDY		(1 << 0)
++#define AC97C_CSR_UNRUN		(1 << 2)
++#define AC97C_CSR_RXRDY		(1 << 4)
++#define AC97C_CSR_ENDTX		(1 << 10)
++#define AC97C_CSR_ENDRX		(1 << 14)
++
++#define AC97C_CMR_SIZE_20	(0 << 16)
++#define AC97C_CMR_SIZE_18	(1 << 16)
++#define AC97C_CMR_SIZE_16	(2 << 16)
++#define AC97C_CMR_SIZE_10	(3 << 16)
++#define AC97C_CMR_CEM_LITTLE	(1 << 18)
++#define AC97C_CMR_CEM_BIG	(0 << 18)
++#define AC97C_CMR_CENA		(1 << 21)
++#define AC97C_CMR_PDCEN		(1 << 22)
++
++#define AC97C_SR_CAEVT		(1 << 3)
++
++#define AC97C_CH_ASSIGN(slot, channel)					\
++	(AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
++#define AC97C_CHANNEL_NONE	0x0
++#define AC97C_CHANNEL_A		0x1
++#define AC97C_CHANNEL_B		0x2
++
++#endif /* __SOUND_AVR32_AC97C_H */
+diff -Nrup linux-2.6.24/sound/avr32/Kconfig linux-avr32/sound/avr32/Kconfig
+--- linux-2.6.24/sound/avr32/Kconfig	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/sound/avr32/Kconfig	2008-02-01 14:51:48.000000000 -0500
+@@ -0,0 +1,11 @@
++menu "AVR32 devices"
++	depends on SND != n && AVR32
++
++config SND_ATMEL_AC97
++	tristate "Atmel AC97 Controller Driver"
++	select SND_PCM
++	select SND_AC97_CODEC
++	help
++	  ALSA sound driver for the Atmel AC97 controller.
++
++endmenu
+diff -Nrup linux-2.6.24/sound/avr32/Makefile linux-avr32/sound/avr32/Makefile
+--- linux-2.6.24/sound/avr32/Makefile	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/sound/avr32/Makefile	2008-02-01 14:51:48.000000000 -0500
+@@ -0,0 +1,3 @@
++snd-atmel-ac97-objs		:= ac97c.o
++
++obj-$(CONFIG_SND_ATMEL_AC97)	+= snd-atmel-ac97.o
+diff -Nrup linux-2.6.24/sound/Kconfig linux-avr32/sound/Kconfig
+--- linux-2.6.24/sound/Kconfig	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/sound/Kconfig	2008-02-01 14:51:48.000000000 -0500
+@@ -63,6 +63,8 @@ source "sound/aoa/Kconfig"
+ 
+ source "sound/arm/Kconfig"
+ 
++source "sound/avr32/Kconfig"
++
+ if SPI
+ source "sound/spi/Kconfig"
+ endif
+diff -Nrup linux-2.6.24/sound/Makefile linux-avr32/sound/Makefile
+--- linux-2.6.24/sound/Makefile	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/sound/Makefile	2008-02-01 14:51:48.000000000 -0500
+@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmw
+ obj-$(CONFIG_SOUND_PRIME) += oss/
+ obj-$(CONFIG_DMASOUND) += oss/
+ obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
+-	sparc/ spi/ parisc/ pcmcia/ mips/ soc/
++	sparc/ spi/ parisc/ pcmcia/ mips/ soc/ avr32/
+ obj-$(CONFIG_SND_AOA) += aoa/
+ 
+ # This one must be compilable even if sound is configured out
+diff -Nrup linux-2.6.24/sound/oss/at32_abdac.c linux-avr32/sound/oss/at32_abdac.c
+--- linux-2.6.24/sound/oss/at32_abdac.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/sound/oss/at32_abdac.c	2008-02-01 14:51:49.000000000 -0500
+@@ -0,0 +1,722 @@
++/*
++ * OSS Sound Driver for the Atmel AT32 on-chip DAC.
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/dma-mapping.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/sound.h>
++#include <linux/soundcard.h>
++
++#include <asm/byteorder.h>
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
++
++/* We want to use the "bizarre" swap-bytes-in-each-halfword macro */
++#include <linux/byteorder/swabb.h>
++
++#include "at32_abdac.h"
++
++#define DMA_BUFFER_SIZE	32768
++#define DMA_PERIOD_SHIFT 10
++#define DMA_PERIOD_SIZE (1 << DMA_PERIOD_SHIFT)
++#define DMA_WRITE_THRESHOLD DMA_PERIOD_SIZE
++
++struct sound_settings {
++	unsigned int format;
++	unsigned int channels;
++	unsigned int sample_rate;
++	/* log2(bytes per sample) */
++	unsigned int input_order;
++};
++
++struct at32_dac {
++	spinlock_t lock;
++	void __iomem *regs;
++
++	/* head and tail refer to number of words */
++	struct {
++		u32 *buf;
++		int head;
++		int tail;
++	} dma;
++
++	struct semaphore sem;
++	wait_queue_head_t write_wait;
++
++	/*
++	 * Read at most ucount bytes from ubuf, translate to 2-channel
++	 * signed 16-bit big endian format and write to the DMA buffer
++	 * as long as there is room left.  Return the number of bytes
++	 * successfully copied from ubuf, or -EFAULT if the first
++	 * sample from ubuf couldn't be read.  This function is not
++	 * called unless there is room for at least one sample (4
++	 * bytes) in the DMA buffer.
++	 */
++	ssize_t (*trans)(struct at32_dac *dac, const char __user *ubuf,
++			 size_t ucount);
++
++	struct sound_settings dsp_settings;
++	struct dma_request_cyclic req;
++
++	struct clk *mck;
++	struct clk *sample_clk;
++	struct platform_device *pdev;
++	int busy;
++	int playing;
++	int dev_dsp;
++};
++static struct at32_dac *the_dac;
++
++static inline unsigned int abdac_get_head(struct at32_dac *dac)
++{
++	return dac->dma.head & ((DMA_BUFFER_SIZE / 4) - 1);
++}
++
++static inline unsigned int abdac_get_tail(struct at32_dac *dac)
++{
++	return dac->dma.tail & ((DMA_BUFFER_SIZE / 4) - 1);
++}
++
++static inline unsigned int abdac_dma_space(struct at32_dac *dac)
++{
++	unsigned int space;
++
++	space = ((dac->dma.tail - dac->dma.head - 1)
++		 & ((DMA_BUFFER_SIZE / 4) - 1));
++	return space;
++}
++
++static void abdac_update_dma_tail(struct at32_dac *dac)
++{
++	dma_addr_t dma_addr;
++	unsigned int new_tail;
++
++	if (dac->playing) {
++		dma_addr = dma_get_current_pos(dac->req.req.dmac,
++					       dac->req.req.channel);
++		new_tail = (dma_addr - dac->req.buffer_start) / 4;
++		if (new_tail >= dac->dma.head
++		    && (dac->dma.tail < dac->dma.head
++			|| dac->dma.tail > new_tail))
++			dev_notice(&dac->pdev->dev, "DMA underrun detected!\n");
++		dac->dma.tail = new_tail;
++		dev_dbg(&dac->pdev->dev, "update tail: 0x%x - 0x%x = %u\n",
++			dma_addr, dac->req.buffer_start, dac->dma.tail);
++	}
++}
++
++static int abdac_start(struct at32_dac *dac)
++{
++	int ret;
++
++	if (dac->playing)
++		return 0;
++
++	memset(dac->dma.buf, 0, DMA_BUFFER_SIZE);
++
++	clk_enable(dac->sample_clk);
++
++	ret = dma_prepare_request_cyclic(dac->req.req.dmac, &dac->req);
++	if (ret)
++		goto out_stop_clock;
++
++	dev_dbg(&dac->pdev->dev, "starting DMA...\n");
++	ret = dma_start_request(dac->req.req.dmac, dac->req.req.channel);
++	if (ret)
++		goto out_stop_request;
++
++	dac_writel(dac, CTRL, DAC_BIT(EN));
++	dac->playing = 1;
++
++	return 0;
++
++out_stop_request:
++	dma_stop_request(dac->req.req.dmac,
++			 dac->req.req.channel);
++out_stop_clock:
++	clk_disable(dac->sample_clk);
++	return ret;
++}
++
++static int abdac_stop(struct at32_dac *dac)
++{
++	if (dac->playing) {
++		dma_stop_request(dac->req.req.dmac, dac->req.req.channel);
++		dac_writel(dac, DATA, 0);
++		dac_writel(dac, CTRL, 0);
++		dac->playing = 0;
++		clk_disable(dac->sample_clk);
++	}
++
++	return 0;
++}
++
++static int abdac_dma_prepare(struct at32_dac *dac)
++{
++	dac->dma.buf = dma_alloc_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
++					  &dac->req.buffer_start, GFP_KERNEL);
++	if (!dac->dma.buf)
++		return -ENOMEM;
++
++	dac->dma.head = dac->dma.tail = 0;
++	dac->req.periods = DMA_BUFFER_SIZE / DMA_PERIOD_SIZE;
++	dac->req.buffer_size = DMA_BUFFER_SIZE;
++
++	return 0;
++}
++
++static void abdac_dma_cleanup(struct at32_dac *dac)
++{
++	if (dac->dma.buf)
++		dma_free_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
++				  dac->dma.buf, dac->req.buffer_start);
++	dac->dma.buf = NULL;
++}
++
++static void abdac_dma_block_complete(struct dma_request *req)
++{
++	struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
++	struct at32_dac *dac = container_of(creq, struct at32_dac, req);
++
++	wake_up(&dac->write_wait);
++}
++
++static void abdac_dma_error(struct dma_request *req)
++{
++	struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
++	struct at32_dac *dac = container_of(creq, struct at32_dac, req);
++
++	dev_err(&dac->pdev->dev, "DMA error\n");
++}
++
++static irqreturn_t abdac_interrupt(int irq, void *dev_id)
++{
++	struct at32_dac *dac = dev_id;
++	u32 status;
++
++	status = dac_readl(dac, INT_STATUS);
++	if (status & DAC_BIT(UNDERRUN)) {
++		dev_err(&dac->pdev->dev, "Underrun detected!\n");
++		dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN));
++	} else {
++		dev_err(&dac->pdev->dev, "Spurious interrupt (status=0x%x)\n",
++			status);
++		dac_writel(dac, INT_CLR, status);
++	}
++
++	return IRQ_HANDLED;
++}
++
++static ssize_t trans_s16be(struct at32_dac *dac, const char __user *ubuf,
++			   size_t ucount)
++{
++	ssize_t ret;
++
++	if (dac->dsp_settings.channels == 2) {
++		const u32 __user *up = (const u32 __user *)ubuf;
++		u32 sample;
++
++		for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
++			if (!abdac_dma_space(dac))
++				break;
++
++			if (unlikely(__get_user(sample, up++))) {
++				if (ret == 0)
++					ret = -EFAULT;
++				break;
++			}
++			dac->dma.buf[abdac_get_head(dac)] = sample;
++			dac->dma.head++;
++		}
++	} else {
++		const u16 __user *up = (const u16 __user *)ubuf;
++		u16 sample;
++
++		for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
++			if (!abdac_dma_space(dac))
++				break;
++
++			if (unlikely(__get_user(sample, up++))) {
++				if (ret == 0)
++					ret = -EFAULT;
++				break;
++			}
++			dac->dma.buf[abdac_get_head(dac)]
++				= (sample << 16) | sample;
++			dac->dma.head++;
++		}
++	}
++
++	return ret;
++}
++
++static ssize_t trans_s16le(struct at32_dac *dac, const char __user *ubuf,
++			   size_t ucount)
++{
++	ssize_t ret;
++
++	if (dac->dsp_settings.channels == 2) {
++		const u32 __user *up = (const u32 __user *)ubuf;
++		u32 sample;
++
++		for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
++			if (!abdac_dma_space(dac))
++				break;
++
++			if (unlikely(__get_user(sample, up++))) {
++				if (ret == 0)
++					ret = -EFAULT;
++				break;
++			}
++			/* Swap bytes in each halfword */
++			dac->dma.buf[abdac_get_head(dac)] = swahb32(sample);
++			dac->dma.head++;
++		}
++	} else {
++		const u16 __user *up = (const u16 __user *)ubuf;
++		u16 sample;
++
++		for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
++			if (!abdac_dma_space(dac))
++				break;
++
++			if (unlikely(__get_user(sample, up++))) {
++				if (ret == 0)
++					ret = -EFAULT;
++				break;
++			}
++			sample = swab16(sample);
++			dac->dma.buf[abdac_get_head(dac)]
++				= (sample << 16) | sample;
++			dac->dma.head++;
++		}
++	}
++
++	return ret;
++}
++
++static ssize_t abdac_dma_translate_from_user(struct at32_dac *dac,
++					       const char __user *buffer,
++					       size_t count)
++{
++	/* At least one buffer must be available at this point */
++	dev_dbg(&dac->pdev->dev, "copying %zu bytes from user...\n", count);
++
++	return dac->trans(dac, buffer, count);
++}
++
++static int abdac_set_format(struct at32_dac *dac, int format)
++{
++	unsigned int order;
++
++	switch (format) {
++	case AFMT_S16_BE:
++		order = 1;
++		dac->trans = trans_s16be;
++		break;
++	case AFMT_S16_LE:
++		order = 1;
++		dac->trans = trans_s16le;
++		break;
++	default:
++		dev_dbg(&dac->pdev->dev, "unsupported format: %d\n", format);
++		return -EINVAL;
++	}
++
++	if (dac->dsp_settings.channels == 2)
++		order++;
++
++	dac->dsp_settings.input_order = order;
++	dac->dsp_settings.format = format;
++	return 0;
++}
++
++static int abdac_set_sample_rate(struct at32_dac *dac, unsigned long rate)
++{
++	unsigned long new_rate;
++	int ret;
++
++	ret = clk_set_rate(dac->sample_clk, 256 * rate);
++	if (ret < 0)
++		return ret;
++
++	/* TODO: mplayer seems to have a problem with this */
++#if 0
++	new_rate = clk_get_rate(dac->sample_clk);
++	dac->dsp_settings.sample_rate = new_rate / 256;
++#else
++	dac->dsp_settings.sample_rate = rate;
++#endif
++
++	return 0;
++}
++
++static ssize_t abdac_dsp_write(struct file *file,
++				 const char __user *buffer,
++				 size_t count, loff_t *ppos)
++{
++	struct at32_dac *dac = file->private_data;
++	DECLARE_WAITQUEUE(wait, current);
++	unsigned int avail;
++	ssize_t copied;
++	ssize_t ret;
++
++	/* Avoid address space checking in the translation functions */
++	if (!access_ok(buffer, count, VERIFY_READ))
++		return -EFAULT;
++
++	down(&dac->sem);
++
++	if (!dac->dma.buf) {
++		ret = abdac_dma_prepare(dac);
++		if (ret)
++			goto out;
++	}
++
++	add_wait_queue(&dac->write_wait, &wait);
++	ret = 0;
++	while (count > 0) {
++		do {
++			abdac_update_dma_tail(dac);
++			avail = abdac_dma_space(dac);
++			set_current_state(TASK_INTERRUPTIBLE);
++			if (avail >= DMA_WRITE_THRESHOLD)
++				break;
++
++			if (file->f_flags & O_NONBLOCK) {
++				if (!ret)
++					ret = -EAGAIN;
++				goto out;
++			}
++
++			pr_debug("Going to wait (avail = %u, count = %zu)\n",
++				 avail, count);
++
++			up(&dac->sem);
++			schedule();
++			if (signal_pending(current)) {
++				if (!ret)
++					ret = -ERESTARTSYS;
++				goto out_nosem;
++			}
++			down(&dac->sem);
++		} while (1);
++
++		copied = abdac_dma_translate_from_user(dac, buffer, count);
++		if (copied < 0) {
++			if (!ret)
++				ret = -EFAULT;
++			goto out;
++		}
++
++		abdac_start(dac);
++
++		count -= copied;
++		ret += copied;
++	}
++
++out:
++	up(&dac->sem);
++out_nosem:
++	remove_wait_queue(&dac->write_wait, &wait);
++	set_current_state(TASK_RUNNING);
++	return ret;
++}
++
++static int abdac_dsp_ioctl(struct inode *inode, struct file *file,
++			     unsigned int cmd, unsigned long arg)
++{
++	struct at32_dac *dac = file->private_data;
++	int __user *up = (int __user *)arg;
++	struct audio_buf_info abinfo;
++	int val, ret;
++
++	switch (cmd) {
++	case OSS_GETVERSION:
++		return put_user(SOUND_VERSION, up);
++
++	case SNDCTL_DSP_SPEED:
++		if (get_user(val, up))
++			return -EFAULT;
++		if (val >= 0) {
++			abdac_stop(dac);
++			ret = abdac_set_sample_rate(dac, val);
++			if (ret)
++				return ret;
++		}
++		return put_user(dac->dsp_settings.sample_rate, up);
++
++	case SNDCTL_DSP_STEREO:
++		if (get_user(val, up))
++			return -EFAULT;
++		abdac_stop(dac);
++		if (val && dac->dsp_settings.channels == 1)
++			dac->dsp_settings.input_order++;
++		else if (!val && dac->dsp_settings.channels != 1)
++			dac->dsp_settings.input_order--;
++		dac->dsp_settings.channels = val ? 2 : 1;
++		return 0;
++
++	case SNDCTL_DSP_CHANNELS:
++		if (get_user(val, up))
++			return -EFAULT;
++
++		if (val) {
++			if (val < 0 || val > 2)
++				return -EINVAL;
++
++			abdac_stop(dac);
++			dac->dsp_settings.input_order
++				+= val - dac->dsp_settings.channels;
++			dac->dsp_settings.channels = val;
++		}
++		return put_user(val, (int *)arg);
++
++	case SNDCTL_DSP_GETFMTS:
++		return put_user(AFMT_S16_BE | AFMT_S16_BE, up);
++
++	case SNDCTL_DSP_SETFMT:
++		if (get_user(val, up))
++			return -EFAULT;
++
++		if (val == AFMT_QUERY) {
++			val = dac->dsp_settings.format;
++		} else {
++			ret = abdac_set_format(dac, val);
++			if (ret)
++				return ret;
++		}
++		return put_user(val, up);
++
++	case SNDCTL_DSP_GETOSPACE:
++		abdac_update_dma_tail(dac);
++		abinfo.fragsize = ((1 << dac->dsp_settings.input_order)
++				   * (DMA_PERIOD_SIZE / 4));
++		abinfo.bytes = (abdac_dma_space(dac)
++				<< dac->dsp_settings.input_order);
++		abinfo.fragstotal = ((DMA_BUFFER_SIZE * 4)
++				     >> (DMA_PERIOD_SHIFT
++					 + dac->dsp_settings.input_order));
++		abinfo.fragments = ((abinfo.bytes
++				     >> dac->dsp_settings.input_order)
++				    / (DMA_PERIOD_SIZE / 4));
++		pr_debug("fragments=%d  fragstotal=%d  fragsize=%d bytes=%d\n",
++			 abinfo.fragments, abinfo.fragstotal, abinfo.fragsize,
++			 abinfo.bytes);
++		return copy_to_user(up, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
++
++	default:
++		dev_dbg(&dac->pdev->dev, "Unimplemented ioctl cmd: 0x%x\n", cmd);
++		return -EINVAL;
++	}
++}
++
++static int abdac_dsp_open(struct inode *inode, struct file *file)
++{
++	struct at32_dac *dac = the_dac;
++	int ret;
++
++	if (file->f_mode & FMODE_READ)
++		return -ENXIO;
++
++	down(&dac->sem);
++	ret = -EBUSY;
++	if (dac->busy)
++		goto out;
++
++	dac->dma.head = dac->dma.tail = 0;
++
++	/* FIXME: What are the correct defaults?  */
++	dac->dsp_settings.channels = 2;
++	abdac_set_format(dac, AFMT_S16_BE);
++	ret = abdac_set_sample_rate(dac, 8000);
++	if (ret)
++		goto out;
++
++	file->private_data = dac;
++	dac->busy = 1;
++
++	ret = 0;
++
++out:
++	up(&dac->sem);
++	return ret;
++}
++
++static int abdac_dsp_release(struct inode *inode, struct file *file)
++{
++	struct at32_dac *dac = file->private_data;
++
++	down(&dac->sem);
++
++	abdac_stop(dac);
++	abdac_dma_cleanup(dac);
++	dac->busy = 0;
++
++	up(&dac->sem);
++
++	return 0;
++}
++
++static struct file_operations abdac_dsp_fops = {
++	.owner		= THIS_MODULE,
++	.llseek		= no_llseek,
++	.write		= abdac_dsp_write,
++	.ioctl		= abdac_dsp_ioctl,
++	.open		= abdac_dsp_open,
++	.release	= abdac_dsp_release,
++};
++
++static int __init abdac_probe(struct platform_device *pdev)
++{
++	struct at32_dac *dac;
++	struct resource *regs;
++	struct clk *mck;
++	struct clk *sample_clk;
++	int irq;
++	int ret;
++
++	if (the_dac)
++		return -EBUSY;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs)
++		return -ENXIO;
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0)
++		return irq;
++
++	mck = clk_get(&pdev->dev, "pclk");
++	if (IS_ERR(mck))
++		return PTR_ERR(mck);
++	sample_clk = clk_get(&pdev->dev, "sample_clk");
++	if (IS_ERR(sample_clk)) {
++		ret = PTR_ERR(sample_clk);
++		goto out_put_mck;
++	}
++	clk_enable(mck);
++
++	ret = -ENOMEM;
++	dac = kzalloc(sizeof(struct at32_dac), GFP_KERNEL);
++	if (!dac)
++		goto out_disable_clk;
++
++	spin_lock_init(&dac->lock);
++	init_MUTEX(&dac->sem);
++	init_waitqueue_head(&dac->write_wait);
++	dac->pdev = pdev;
++	dac->mck = mck;
++	dac->sample_clk = sample_clk;
++
++	dac->regs = ioremap(regs->start, regs->end - regs->start + 1);
++	if (!dac->regs)
++		goto out_free_dac;
++
++	ret = request_irq(irq, abdac_interrupt, 0, "dac", dac);
++	if (ret)
++		goto out_unmap_regs;
++
++	/* FIXME */
++	dac->req.req.dmac = find_dma_controller(0);
++	if (!dac->req.req.dmac)
++		goto out_free_irq;
++
++	ret = dma_alloc_channel(dac->req.req.dmac);
++	if (ret < 0)
++		goto out_free_irq;
++
++	dac->req.req.channel = ret;
++	dac->req.req.block_complete = abdac_dma_block_complete;
++	dac->req.req.error = abdac_dma_error;
++	dac->req.data_reg = regs->start + DAC_DATA;
++	dac->req.periph_id = 2; /* FIXME */
++	dac->req.direction = DMA_DIR_MEM_TO_PERIPH;
++	dac->req.width = DMA_WIDTH_32BIT;
++
++	/* Make sure the DAC is silent and disabled */
++	dac_writel(dac, DATA, 0);
++	dac_writel(dac, CTRL, 0);
++
++	ret = register_sound_dsp(&abdac_dsp_fops, -1);
++	if (ret < 0)
++		goto out_free_dma;
++	dac->dev_dsp = ret;
++
++	/* TODO: Register mixer */
++
++	the_dac = dac;
++	platform_set_drvdata(pdev, dac);
++
++	return 0;
++
++out_free_dma:
++	dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
++out_free_irq:
++	free_irq(irq, dac);
++out_unmap_regs:
++	iounmap(dac->regs);
++out_free_dac:
++	kfree(dac);
++out_disable_clk:
++	clk_disable(mck);
++	clk_put(sample_clk);
++out_put_mck:
++	clk_put(mck);
++	return ret;
++}
++
++static int __exit abdac_remove(struct platform_device *pdev)
++{
++	struct at32_dac *dac;
++
++	dac = platform_get_drvdata(pdev);
++	if (dac) {
++		unregister_sound_dsp(dac->dev_dsp);
++		dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
++		free_irq(platform_get_irq(pdev, 0), dac);
++		iounmap(dac->regs);
++		clk_disable(dac->mck);
++		clk_put(dac->sample_clk);
++		clk_put(dac->mck);
++		kfree(dac);
++		platform_set_drvdata(pdev, NULL);
++		the_dac = NULL;
++	}
++
++	return 0;
++}
++
++static struct platform_driver abdac_driver = {
++	.remove		= __exit_p(abdac_remove),
++	.driver		= {
++		.name	= "abdac",
++	},
++};
++
++static int __init abdac_init(void)
++{
++	return platform_driver_probe(&abdac_driver, abdac_probe);
++}
++module_init(abdac_init);
++
++static void __exit abdac_exit(void)
++{
++	platform_driver_unregister(&abdac_driver);
++}
++module_exit(abdac_exit);
++
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_DESCRIPTION("Sound Driver for the Atmel AT32 ABDAC");
++MODULE_LICENSE("GPL");
+diff -Nrup linux-2.6.24/sound/oss/at32_abdac.h linux-avr32/sound/oss/at32_abdac.h
+--- linux-2.6.24/sound/oss/at32_abdac.h	1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/sound/oss/at32_abdac.h	2008-02-01 14:51:49.000000000 -0500
+@@ -0,0 +1,59 @@
++/*
++ * Register definitions for the Atmel AT32 on-chip DAC.
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __SOUND_OSS_AT32_ABDAC_H__
++#define __SOUND_OSS_AT32_ABDAC_H__
++
++/* DAC register offsets */
++#define DAC_DATA                                0x0000
++#define DAC_CTRL                                0x0008
++#define DAC_INT_MASK                            0x000c
++#define DAC_INT_EN                              0x0010
++#define DAC_INT_DIS                             0x0014
++#define DAC_INT_CLR                             0x0018
++#define DAC_INT_STATUS                          0x001c
++#define DAC_PDC_DATA                            0x0020
++
++/* Bitfields in CTRL */
++#define DAC_SWAP_OFFSET                         30
++#define DAC_SWAP_SIZE                           1
++#define DAC_EN_OFFSET                           31
++#define DAC_EN_SIZE                             1
++
++/* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */
++#define DAC_UNDERRUN_OFFSET                     28
++#define DAC_UNDERRUN_SIZE                       1
++#define DAC_TX_READY_OFFSET                     29
++#define DAC_TX_READY_SIZE                       1
++#define DAC_TX_BUFFER_EMPTY_OFFSET              30
++#define DAC_TX_BUFFER_EMPTY_SIZE                1
++#define DAC_CHANNEL_TX_END_OFFSET               31
++#define DAC_CHANNEL_TX_END_SIZE                 1
++
++/* Bit manipulation macros */
++#define DAC_BIT(name)					\
++	(1 << DAC_##name##_OFFSET)
++#define DAC_BF(name, value)				\
++	(((value) & ((1 << DAC_##name##_SIZE) - 1))	\
++	 << DAC_##name##_OFFSET)
++#define DAC_BFEXT(name, value)				\
++	(((value) >> DAC_##name##_OFFSET)		\
++	 & ((1 << DAC_##name##_SIZE) - 1))
++#define DAC_BFINS(name, value, old)			\
++	(((old) & ~(((1 << DAC_##name##_SIZE) - 1)	\
++		    << DAC_##name##_OFFSET))		\
++	 | DAC_BF(name,value))
++
++/* Register access macros */
++#define dac_readl(port, reg)				\
++	__raw_readl((port)->regs + DAC_##reg)
++#define dac_writel(port, reg, value)			\
++	__raw_writel((value), (port)->regs + DAC_##reg)
++
++#endif /* __SOUND_OSS_AT32_ABDAC_H__ */
+diff -Nrup linux-2.6.24/sound/oss/Kconfig linux-avr32/sound/oss/Kconfig
+--- linux-2.6.24/sound/oss/Kconfig	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/sound/oss/Kconfig	2008-02-01 14:51:49.000000000 -0500
+@@ -654,3 +654,7 @@ config SOUND_SH_DAC_AUDIO_CHANNEL
+ 	int "DAC channel"
+ 	default "1"
+ 	depends on SOUND_SH_DAC_AUDIO
++
++config SOUND_AT32_ABDAC
++	tristate "Atmel AT32 Audio Bitstream DAC (ABDAC) support"
++	depends on SOUND_PRIME && AVR32
+diff -Nrup linux-2.6.24/sound/oss/Makefile linux-avr32/sound/oss/Makefile
+--- linux-2.6.24/sound/oss/Makefile	2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/sound/oss/Makefile	2008-02-01 14:51:49.000000000 -0500
+@@ -10,6 +10,7 @@ obj-$(CONFIG_SOUND_CS4232)	+= cs4232.o a
+ 
+ # Please leave it as is, cause the link order is significant !
+ 
++obj-$(CONFIG_SOUND_AT32_ABDAC)	+= at32_abdac.o
+ obj-$(CONFIG_SOUND_SH_DAC_AUDIO)	+= sh_dac_audio.o
+ obj-$(CONFIG_SOUND_HAL2)	+= hal2.o
+ obj-$(CONFIG_SOUND_AEDSP16)	+= aedsp16.o
diff --git a/target/device/Atmel/atngw100-base/kernel-patches/linux-2.6.24-avr32-mmc.patch b/target/device/Atmel/atngw100-base/kernel-patches/linux-2.6.24-avr32-mmc.patch
new file mode 100644
index 000000000..a7654b5c6
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/kernel-patches/linux-2.6.24-avr32-mmc.patch
@@ -0,0 +1,255 @@
+diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
+index eeac479..7913cd8 100644
+--- a/drivers/mmc/host/atmel-mci.c
++++ b/drivers/mmc/host/atmel-mci.c
+@@ -39,7 +39,6 @@ enum {
+ 	EVENT_STOP_COMPLETE,
+ 	EVENT_DMA_COMPLETE,
+ 	EVENT_DMA_ERROR,
+-	EVENT_CARD_DETECT,
+ };
+ 
+ struct atmel_mci_dma {
+@@ -70,6 +69,9 @@ struct atmel_mci {
+ 	int			detect_pin;
+ 	int			wp_pin;
+ 
++	/* For detect pin debouncing */
++	struct timer_list	detect_timer;
++
+ 	unsigned long		bus_hz;
+ 	unsigned long		mapbase;
+ 	struct clk		*mck;
+@@ -108,8 +110,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
+ 	test_bit(EVENT_DMA_COMPLETE, &host->completed_events)
+ #define mci_dma_error_is_complete(host)			\
+ 	test_bit(EVENT_DMA_ERROR, &host->completed_events)
+-#define mci_card_detect_is_complete(host)			\
+-	test_bit(EVENT_CARD_DETECT, &host->completed_events)
+ 
+ /* Test and clear bit macros for pending events */
+ #define mci_clear_cmd_is_pending(host)			\
+@@ -124,8 +124,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
+ 	test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
+ #define mci_clear_dma_error_is_pending(host)		\
+ 	test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
+-#define mci_clear_card_detect_is_pending(host)		\
+-	test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
+ 
+ /* Test and set bit macros for completed events */
+ #define mci_set_cmd_is_completed(host)			\
+@@ -140,8 +138,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
+ 	test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
+ #define mci_set_dma_error_is_completed(host)		\
+ 	test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
+-#define mci_set_card_detect_is_completed(host)		\
+-	test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
+ 
+ /* Set bit macros for completed events */
+ #define mci_set_cmd_complete(host)			\
+@@ -158,8 +154,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
+ 	set_bit(EVENT_DMA_COMPLETE, &host->completed_events)
+ #define mci_set_dma_error_complete(host)		\
+ 	set_bit(EVENT_DMA_ERROR, &host->completed_events)
+-#define mci_set_card_detect_complete(host)		\
+-	set_bit(EVENT_CARD_DETECT, &host->completed_events)
+ 
+ /* Set bit macros for pending events */
+ #define mci_set_cmd_pending(host)			\
+@@ -174,8 +168,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
+ 	set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
+ #define mci_set_dma_error_pending(host)			\
+ 	set_bit(EVENT_DMA_ERROR, &host->pending_events)
+-#define mci_set_card_detect_pending(host)		\
+-	set_bit(EVENT_CARD_DETECT, &host->pending_events)
+ 
+ /* Clear bit macros for pending events */
+ #define mci_clear_cmd_pending(host)			\
+@@ -190,8 +182,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
+ 	clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
+ #define mci_clear_dma_error_pending(host)		\
+ 	clear_bit(EVENT_DMA_ERROR, &host->pending_events)
+-#define mci_clear_card_detect_pending(host)		\
+-	clear_bit(EVENT_CARD_DETECT, &host->pending_events)
+ 
+ 
+ #ifdef CONFIG_DEBUG_FS
+@@ -560,6 +550,21 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+ 				mci_readl(host, IMR));
+ 
+ 	WARN_ON(host->mrq != NULL);
++
++	/*
++	 * We may "know" the card is gone even though there's still an
++	 * electrical connection. If so, we really need to communicate
++	 * this to the MMC core since there won't be any more
++	 * interrupts as the card is completely removed. Otherwise,
++	 * the MMC core might believe the card is still there even
++	 * though the card was just removed very slowly.
++	 */
++	if (!host->present) {
++		mrq->cmd->error = -ENOMEDIUM;
++		mmc_request_done(mmc, mrq);
++		return;
++	}
++
+ 	host->mrq = mrq;
+ 	host->pending_events = 0;
+ 	host->completed_events = 0;
+@@ -729,6 +734,61 @@ static void atmci_command_complete(struct atmel_mci *host,
+ 	}
+ }
+ 
++static void atmci_detect_change(unsigned long data)
++{
++	struct atmel_mci *host = (struct atmel_mci *)data;
++	struct mmc_request *mrq = host->mrq;
++	int present;
++
++	/*
++	 * atmci_remove() sets detect_pin to -1 before freeing the
++	 * interrupt. We must not re-enable the interrupt if it has
++	 * been freed.
++	 */
++	smp_rmb();
++	if (host->detect_pin < 0)
++		return;
++
++	enable_irq(gpio_to_irq(host->detect_pin));
++	present = !gpio_get_value(host->detect_pin);
++
++	dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n",
++			present, host->present);
++
++	if (present != host->present) {
++		dev_dbg(&host->mmc->class_dev, "card %s\n",
++			present ? "inserted" : "removed");
++		host->present = present;
++
++		/* Reset controller if card is gone */
++		if (!present) {
++			mci_writel(host, CR, MCI_BIT(SWRST));
++			mci_writel(host, IDR, ~0UL);
++			mci_writel(host, CR, MCI_BIT(MCIEN));
++		}
++
++		/* Clean up queue if present */
++		if (mrq) {
++			if (!mci_cmd_is_complete(host))
++				mrq->cmd->error = -ENOMEDIUM;
++			if (mrq->data && !mci_data_is_complete(host)
++			    && !mci_data_error_is_complete(host)) {
++				dma_stop_request(host->dma.req.req.dmac,
++						host->dma.req.req.channel);
++				host->data->error = -ENOMEDIUM;
++				atmci_data_complete(host, host->data);
++			}
++			if (mrq->stop && !mci_stop_is_complete(host))
++				mrq->stop->error = -ENOMEDIUM;
++
++			host->cmd = NULL;
++			atmci_request_end(host->mmc, mrq);
++		}
++
++		mmc_detect_change(host->mmc, 0);
++	}
++}
++
+ static void atmci_tasklet_func(unsigned long priv)
+ {
+ 	struct mmc_host *mmc = (struct mmc_host *)priv;
+@@ -806,33 +866,6 @@ static void atmci_tasklet_func(unsigned long priv)
+ 		data->bytes_xfered = data->blocks * data->blksz;
+ 		atmci_data_complete(host, data);
+ 	}
+-	if (mci_clear_card_detect_is_pending(host)) {
+-		/* Reset controller if card is gone */
+-		if (!host->present) {
+-			mci_writel(host, CR, MCI_BIT(SWRST));
+-			mci_writel(host, IDR, ~0UL);
+-			mci_writel(host, CR, MCI_BIT(MCIEN));
+-		}
+-
+-		/* Clean up queue if present */
+-		if (mrq) {
+-			if (!mci_cmd_is_complete(host))
+-				mrq->cmd->error = -ETIMEDOUT;
+-			if (mrq->data && !mci_data_is_complete(host)
+-			    && !mci_data_error_is_complete(host)) {
+-				dma_stop_request(host->dma.req.req.dmac,
+-						host->dma.req.req.channel);
+-				host->data->error = -ETIMEDOUT;
+-				atmci_data_complete(host, data);
+-			}
+-			if (mrq->stop && !mci_stop_is_complete(host))
+-				mrq->stop->error = -ETIMEDOUT;
+-
+-			host->cmd = NULL;
+-			atmci_request_end(mmc, mrq);
+-		}
+-		mmc_detect_change(host->mmc, msecs_to_jiffies(100));
+-	}
+ }
+ 
+ static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
+@@ -957,20 +990,19 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id)
+ 	return IRQ_HANDLED;
+ }
+ 
+-static irqreturn_t atmci_detect_change(int irq, void *dev_id)
++static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
+ {
+ 	struct mmc_host *mmc = dev_id;
+ 	struct atmel_mci *host = mmc_priv(mmc);
+ 
+-	int present = !gpio_get_value(irq_to_gpio(irq));
++	/*
++	 * Disable interrupts until the pin has stabilized and check
++	 * the state then. Use mod_timer() since we may be in the
++	 * middle of the timer routine when this interrupt triggers.
++	 */
++	disable_irq_nosync(irq);
++	mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20));
+ 
+-	if (present != host->present) {
+-		dev_dbg(&mmc->class_dev, "card %s\n",
+-			present ? "inserted" : "removed");
+-		host->present = present;
+-		mci_set_card_detect_pending(host);
+-		tasklet_schedule(&host->tasklet);
+-	}
+ 	return IRQ_HANDLED;
+ }
+ 
+@@ -1079,8 +1111,11 @@ static int __devinit atmci_probe(struct platform_device *pdev)
+ 	mmc_add_host(mmc);
+ 
+ 	if (host->detect_pin >= 0) {
++		setup_timer(&host->detect_timer, atmci_detect_change,
++				(unsigned long)host);
++
+ 		ret = request_irq(gpio_to_irq(host->detect_pin),
+-				  atmci_detect_change,
++				  atmci_detect_interrupt,
+ 				  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ 				  DRIVER_NAME, mmc);
+ 		if (ret) {
+@@ -1125,9 +1160,16 @@ static int __devexit atmci_remove(struct platform_device *pdev)
+ 		atmci_cleanup_debugfs(host);
+ 
+ 		if (host->detect_pin >= 0) {
+-			free_irq(gpio_to_irq(host->detect_pin), host->mmc);
++			int pin = host->detect_pin;
++
++			/* Make sure our timer doesn't enable the interrupt */
++			host->detect_pin = -1;
++			smp_wmb();
++
++			free_irq(gpio_to_irq(pin), host->mmc);
++			del_timer_sync(&host->detect_timer);
+ 			cancel_delayed_work(&host->mmc->detect);
+-			gpio_free(host->detect_pin);
++			gpio_free(pin);
+ 		}
+ 
+ 		mmc_remove_host(host->mmc);
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/TZ b/target/device/Atmel/atngw100-base/target_skeleton/etc/TZ
new file mode 100644
index 000000000..36498c4a7
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/TZ
@@ -0,0 +1 @@
+CET1CDT
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/fstab b/target/device/Atmel/atngw100-base/target_skeleton/etc/fstab
new file mode 100644
index 000000000..fcf1a78cd
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/fstab
@@ -0,0 +1,3 @@
+# /etc/fstab: static file system information.
+#
+# <file system>	<mount pt>	<type>		<options>	<dump>	<pass>
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/group b/target/device/Atmel/atngw100-base/target_skeleton/etc/group
new file mode 100644
index 000000000..cec65da3f
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/group
@@ -0,0 +1,20 @@
+root::0:
+daemon:x:1:
+bin:x:2:
+sys:x:3:
+adm:x:4:
+tty:x:5:
+disk:x:6:
+kmem:x:9:
+wheel:x:10:root
+dialout:x:20:
+utmp:x:43:
+staff:x:50:
+www-data::51:
+ftp::52:
+haldaemon:x:68:
+dbus:x:81:
+audio::101:
+users::500:
+default::1000:
+nogroup::65534:
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/hostname b/target/device/Atmel/atngw100-base/target_skeleton/etc/hostname
new file mode 100644
index 000000000..c4100b512
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/hostname
@@ -0,0 +1 @@
+at32base.example.net
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/hosts b/target/device/Atmel/atngw100-base/target_skeleton/etc/hosts
new file mode 100644
index 000000000..1f2238508
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/hosts
@@ -0,0 +1,12 @@
+127.0.0.1   localhost.localdomain localhost
+127.0.1.1   at32base.example.net at32base
+
+# The following lines are desirable for IPv6 capable hosts
+::1     localhost
+::1     ip6-localhost ip6-loopback
+::1     at32base.example.net at32base
+fe00::0 ip6-localnet
+ff00::0 ip6-mcastprefix
+ff02::1 ip6-allnodes
+ff02::2 ip6-allrouters
+ff02::3 ip6-allhosts
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/K70sendsig b/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/K70sendsig
new file mode 100755
index 000000000..1a2485251
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/K70sendsig
@@ -0,0 +1 @@
+#!/bin/sh
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/S00mountvirtfs b/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/S00mountvirtfs
new file mode 100755
index 000000000..d9e5c9249
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/S00mountvirtfs
@@ -0,0 +1,74 @@
+#!/bin/sh
+
+MOUNT=/bin/mount
+MKDIR=/bin/mkdir
+
+retval=0
+
+mount_fs()
+{
+	if [ "$1" = "" -o "$2" = "" -o "$3" = "" ]; then
+		return;
+	fi
+
+	if [ "$4" = "" ]; then
+		if ! ${MOUNT} -t $3 $1 $2; then
+			echo "  mount $2 failed"
+			retval=1
+			return 1
+		else
+			echo "  $2 mounted"
+		fi
+	else
+		if ! ${MOUNT} -t $3 -o $4 $1 $2; then
+			echo "  mount $2 failed"
+			retval=1
+			return 1
+		else
+			echo "  $2 mounted"
+		fi
+	fi
+
+	return 0
+}
+
+mkdir_fs()
+{
+	if [ "$1" = "" ]; then
+		return;
+	fi
+
+	if ! ${MKDIR} $1; then
+		echo "  mkdir $1 failed"
+		retval=1
+		return 1
+	else
+		echo "  $1 directory made"
+	fi
+
+	return 0
+}
+
+echo "Mounting virtual filesystems:"
+
+mount_fs proc /proc proc
+mount_fs sys /sys sysfs
+
+if mount_fs dev /dev tmpfs "size=512k,mode=0755"; then
+	mkdir_fs /dev/pts
+	mount_fs pts /dev/pts devpts
+	mkdir_fs /dev/shm
+	# g_serial is not detected by mdev.
+	mknod /dev/ttygserial c 127 0
+fi
+
+mount_fs config /config configfs
+mount_fs tmp /tmp tmpfs
+mount_fs run /var/run tmpfs
+mount_fs log /var/log tmpfs
+
+if [ $retval -ne 0 ]; then
+	echo "  WARNING: not able to mount all virtual file systems"
+fi
+
+exit $retval
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/S01hotplug b/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/S01hotplug
new file mode 100755
index 000000000..a30f06a09
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/S01hotplug
@@ -0,0 +1,14 @@
+#! /bin/sh
+
+echo -n "Setting up mdev: "
+set -e
+trap 'echo "failed"' EXIT
+/bin/ln -s /proc/self/fd /dev/fd
+/bin/ln -s /proc/self/fd/0 /dev/stdin
+/bin/ln -s /proc/self/fd/1 /dev/stdout
+/bin/ln -s /proc/self/fd/2 /dev/stderr
+/bin/ln -s /proc/kcore /dev/core
+/bin/echo /sbin/mdev > /proc/sys/kernel/hotplug
+/sbin/mdev -s
+trap - EXIT
+echo "done"
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/S02hostname b/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/S02hostname
new file mode 100755
index 000000000..083d41dc4
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/S02hostname
@@ -0,0 +1,47 @@
+#!/bin/sh
+
+PROGRAM=/bin/hostname
+
+echo -n "Setting hostname: "
+[ -x ${PROGRAM} ] || (echo "missing"; exit 0)
+
+if [ -f /etc/hostname ]; then
+	HOST="$(cat /etc/hostname)"
+else
+	HOST="localhost.localdomain"
+fi
+
+start() {
+	if ${PROGRAM} "${HOST}"; then
+		echo "'${HOST}'"
+	else
+		echo "failed"
+		exit 1
+	fi
+}
+
+stop() {
+	return 0
+}
+
+restart() {
+	stop
+	start
+}
+
+case "$1" in
+  start)
+        start
+        ;;
+  stop)
+        stop
+        ;;
+  restart|reload)
+        restart
+        ;;
+  *)
+        echo $"Usage: $0 {start|stop|restart}"
+        exit 1
+esac
+
+exit $?
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/S08syslog b/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/S08syslog
new file mode 100755
index 000000000..58b05925d
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/S08syslog
@@ -0,0 +1,24 @@
+#!/bin/sh
+
+SYSLOGD=/sbin/syslogd
+
+echo -n "Starting syslogd: "
+if [ ! -x "${SYSLOGD}" ]; then
+	echo "missing"
+	exit 1
+fi
+
+if ${SYSLOGD}; then
+	echo "done"
+else
+	echo "failed"
+	exit 1
+fi
+
+echo -n "Log messages to syslog: "
+if echo 4 4 1 7 > /proc/sys/kernel/printk; then
+	echo "done"
+else
+	echo "failed"
+	exit 1
+fi
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/S09klog b/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/S09klog
new file mode 100755
index 000000000..1b0028a08
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/S09klog
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+KLOGD=/sbin/klogd
+
+echo -n "Starting klogd: "
+if [ ! -x "${KLOGD}" ]; then
+	echo "missing"
+	exit 1
+fi
+
+if ${KLOGD}; then
+	echo "done"
+else
+	echo "failed"
+	exit 1
+fi
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/rcK b/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/rcK
new file mode 100755
index 000000000..1db1400fa
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/rcK
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+echo "Shutting down ..."
+for k in /etc/init.d/K*; do
+	$k stop
+done
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/rcS b/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/rcS
new file mode 100755
index 000000000..4d80c251b
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/init.d/rcS
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+for s in /etc/init.d/S*; do
+	if [ -x $s ]; then
+		$s start
+	fi
+done
+
+echo
+echo "NGW100 ready"
+echo
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/inittab b/target/device/Atmel/atngw100-base/target_skeleton/etc/inittab
new file mode 100644
index 000000000..539edb7fb
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/inittab
@@ -0,0 +1,27 @@
+# Inittab for the ATNGW100 development board
+#
+# Note: BusyBox init doesn't support runlevels.  The runlevels field is
+# completely ignored by BusyBox init. If you want runlevels, use sysvinit.
+#
+# Format for each entry: <id>:<runlevels>:<action>:<process>
+#
+# id        == tty to run on, or empty for /dev/console
+# runlevels == ignored
+# action    == one of sysinit, respawn, askfirst, wait, and once
+# process   == program to run
+
+# Run the rcS script after kernel is booted.
+::sysinit:/etc/init.d/rcS
+
+# Run a shell on the first serial port. Comment out if you want a getty instead.
+ttyS0::respawn:-/bin/sh
+
+# Run a shell on the g_serial port (USB gadget device)? This shell will spawn
+# error message if the device is not connected.
+#ttygserial::respawn:-/bin/sh
+
+# Uncomment this to run a getty on the first serial port.
+#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100
+
+# Run a script on shutdown.
+::shutdown:/etc/init.d/rcK
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/mdev.conf b/target/device/Atmel/atngw100-base/target_skeleton/etc/mdev.conf
new file mode 100644
index 000000000..7c91ea749
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/mdev.conf
@@ -0,0 +1,49 @@
+# mdev.conf for ATNGW100
+#
+# Syntax:
+#  <regexp> <UID>:<GID> <PERM> [{@,$,*} <CMD>]
+#    @: run <CMD> after creating
+#    $: run <CMD> before removal
+#    *: like @ and $ at the same time
+#    <CMD> is run inside /dev using system()
+
+full	0:0	666
+null	0:0	777
+zero	0:0	666
+
+random	0:0	444
+urandom	0:0	444
+
+console	0:5	0600
+kmem	0:9	000
+mem	0:9	0640
+ptmx	0:5	0660
+
+sda.*	0:6	0660
+sdb.*	0:6	0660
+hda.*	0:6	0660
+hdb.*	0:6	0660
+mtd.*	0:6	0660
+mmc.*	0:6	0660
+
+# Move input devices to input directory
+event.*	0:0	0660	@(mkdir -p input&&mv $MDEV input)
+mice	0:0	0660	@(mkdir -p input&&mv $MDEV input)
+mouse.*	0:0	0660	@(mkdir -p input&&mv $MDEV input)
+
+# Move sound devices to sound directory
+pcm.*		0:101	0660	@(mkdir -p snd&&mv $MDEV snd)
+seq		0:101	0660	@(mkdir -p snd&&mv $MDEV snd)
+timer		0:101	0660	@(mkdir -p snd&&mv $MDEV snd)
+control.*	0:101	0660	@(mkdir -p snd&&mv $MDEV snd)
+
+tty	0:5	0660
+tty0.*	0:5	0660
+tty1.*	0:5	0660
+tty2.*	0:5	0660
+tty3.*	0:5	0660
+tty4.*	0:5	0660
+tty5.*	0:5	0660
+tty6.*	0:5	0660
+
+ttyS.*	0:20	640
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/mtab b/target/device/Atmel/atngw100-base/target_skeleton/etc/mtab
new file mode 120000
index 000000000..e1c204547
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/mtab
@@ -0,0 +1 @@
+../proc/mounts
\ No newline at end of file
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/network/interfaces b/target/device/Atmel/atngw100-base/target_skeleton/etc/network/interfaces
new file mode 100644
index 000000000..add67ee3d
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/network/interfaces
@@ -0,0 +1,7 @@
+# Configure Loopback
+auto lo
+iface lo inet loopback
+
+# Configure Ethernet 0
+#auto eth0
+iface eth0 inet dhcp
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/passwd b/target/device/Atmel/atngw100-base/target_skeleton/etc/passwd
new file mode 100644
index 000000000..1a68e7b8e
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/passwd
@@ -0,0 +1,17 @@
+root:x:0:0:root:/:/bin/sh
+daemon:x:1:1:daemon:/usr/sbin:/bin/sh
+bin:x:2:2:bin:/bin:/bin/sh
+sys:x:3:3:sys:/dev:/bin/sh
+sync:x:4:100:sync:/bin:/bin/sync
+mail:x:8:8:mail:/var/spool/mail:/bin/sh
+proxy:x:13:13:proxy:/bin:/bin/sh
+www-data:x:33:33:www-data:/var/www:/bin/sh
+backup:x:34:34:backup:/var/backups:/bin/sh
+operator:x:37:37:Operator:/var:/bin/sh
+haldaemon:x:68:68:hald:/:/bin/sh
+dbus:x:81:81:dbus:/var/run/dbus:/bin/sh
+ftp:x:50:50:Anonymous FTP user:/home/ftp:/bin/ash
+dnsmasq:x:52:52:dnsmasq:/var/lib/dnsmasq:/bin/false
+sshd:x:110:65534:Operator:/var/run/sshd:/bin/false
+nobody:x:65534:65534:nobody:/nonexistent:/bin/false
+default:x:1000:1000:Default non-root user:/home/default:/bin/sh
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/protocols b/target/device/Atmel/atngw100-base/target_skeleton/etc/protocols
new file mode 100644
index 000000000..1521f3980
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/protocols
@@ -0,0 +1,149 @@
+# /etc/protocols:
+# $Id: protocols,v 1.3 2001/07/07 07:07:15 nalin Exp $
+#
+# Internet (IP) protocols
+#
+#	from: @(#)protocols	5.1 (Berkeley) 4/17/89
+#
+# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
+#
+# See also http://www.iana.org/assignments/protocol-numbers
+
+ip	0	IP		# internet protocol, pseudo protocol number
+#hopopt	0	HOPOPT		# hop-by-hop options for ipv6
+icmp	1	ICMP		# internet control message protocol
+igmp	2	IGMP		# internet group management protocol
+ggp	3	GGP		# gateway-gateway protocol
+ipencap	4	IP-ENCAP	# IP encapsulated in IP (officially ``IP'')
+st	5	ST		# ST datagram mode
+tcp	6	TCP		# transmission control protocol
+cbt	7	CBT		# CBT, Tony Ballardie <A.Ballardie@cs.ucl.ac.uk>
+egp	8	EGP		# exterior gateway protocol
+igp	9	IGP		# any private interior gateway (Cisco: for IGRP)
+bbn-rcc	10	BBN-RCC-MON	# BBN RCC Monitoring
+nvp	11	NVP-II		# Network Voice Protocol
+pup	12	PUP		# PARC universal packet protocol
+argus	13	ARGUS		# ARGUS
+emcon	14	EMCON		# EMCON
+xnet	15	XNET		# Cross Net Debugger
+chaos	16	CHAOS		# Chaos
+udp	17	UDP		# user datagram protocol
+mux	18	MUX		# Multiplexing protocol
+dcn	19	DCN-MEAS	# DCN Measurement Subsystems
+hmp	20	HMP		# host monitoring protocol
+prm	21	PRM		# packet radio measurement protocol
+xns-idp	22	XNS-IDP		# Xerox NS IDP
+trunk-1	23	TRUNK-1		# Trunk-1
+trunk-2	24	TRUNK-2		# Trunk-2
+leaf-1	25	LEAF-1		# Leaf-1
+leaf-2	26	LEAF-2		# Leaf-2
+rdp	27	RDP		# "reliable datagram" protocol
+irtp	28	IRTP		# Internet Reliable Transaction Protocol
+iso-tp4	29	ISO-TP4		# ISO Transport Protocol Class 4
+netblt	30	NETBLT		# Bulk Data Transfer Protocol
+mfe-nsp	31	MFE-NSP		# MFE Network Services Protocol
+merit-inp	32	MERIT-INP	# MERIT Internodal Protocol
+sep	33	SEP		# Sequential Exchange Protocol
+3pc	34	3PC		# Third Party Connect Protocol
+idpr	35	IDPR		# Inter-Domain Policy Routing Protocol
+xtp	36	XTP		# Xpress Tranfer Protocol
+ddp	37	DDP		# Datagram Delivery Protocol
+idpr-cmtp	38	IDPR-CMTP	# IDPR Control Message Transport Proto
+tp++	39	TP++		# TP++ Transport Protocol
+il	40	IL		# IL Transport Protocol
+ipv6	41	IPv6		# IPv6
+sdrp	42	SDRP		# Source Demand Routing Protocol
+ipv6-route	43	IPv6-Route 	# Routing Header for IPv6
+ipv6-frag	44	IPv6-Frag	# Fragment Header for IPv6
+idrp	45	IDRP		# Inter-Domain Routing Protocol
+rsvp	46	RSVP		# Resource ReSerVation Protocol
+gre	47	GRE		# Generic Routing Encapsulation
+mhrp	48	MHRP		# Mobile Host Routing Protocol
+bna	49	BNA		# BNA
+ipv6-crypt	50	IPv6-Crypt	# Encryption Header for IPv6
+ipv6-auth	51	IPv6-Auth	# Authentication Header for IPv6
+i-nlsp	52	I-NLSP		# Integrated Net Layer Security TUBA
+swipe	53	SWIPE		# IP with Encryption
+narp	54	NARP		# NBMA Address Resolution Protocol
+mobile	55	MOBILE		# IP Mobility
+tlsp	56	TLSP		# Transport Layer Security Protocol
+skip	57	SKIP		# SKIP
+ipv6-icmp	58	IPv6-ICMP	# ICMP for IPv6
+ipv6-nonxt	59	IPv6-NoNxt	# No Next Header for IPv6
+ipv6-opts	60	IPv6-Opts	# Destination Options for IPv6
+#	61			# any host internal protocol
+cftp	62	CFTP		# CFTP
+#	63			# any local network
+sat-expak	64	SAT-EXPAK	# SATNET and Backroom EXPAK
+kryptolan	65	KRYPTOLAN	# Kryptolan
+rvd	66	RVD		# MIT Remote Virtual Disk Protocol
+ippc	67	IPPC		# Internet Pluribus Packet Core
+#	68			# any distributed file system
+sat-mon	69	SAT-MON		# SATNET Monitoring
+visa	70	VISA		# VISA Protocol
+ipcv	71	IPCV		# Internet Packet Core Utility
+cpnx	72	CPNX		# Computer Protocol Network Executive
+cphb	73	CPHB		# Computer Protocol Heart Beat
+wsn	74	WSN		# Wang Span Network
+pvp	75	PVP		# Packet Video Protocol
+br-sat-mon	76	BR-SAT-MON	# Backroom SATNET Monitoring
+sun-nd	77	SUN-ND		# SUN ND PROTOCOL-Temporary
+wb-mon	78	WB-MON		# WIDEBAND Monitoring
+wb-expak	79	WB-EXPAK	# WIDEBAND EXPAK
+iso-ip	80	ISO-IP		# ISO Internet Protocol
+vmtp	81	VMTP		# Versatile Message Transport
+secure-vmtp	82	SECURE-VMTP	# SECURE-VMTP
+vines	83	VINES		# VINES
+ttp	84	TTP		# TTP
+nsfnet-igp	85	NSFNET-IGP	# NSFNET-IGP
+dgp	86	DGP		# Dissimilar Gateway Protocol
+tcf	87	TCF		# TCF
+eigrp	88	EIGRP		# Enhanced Interior Routing Protocol (Cisco)
+ospf	89	OSPFIGP		# Open Shortest Path First IGP
+sprite-rpc	90	Sprite-RPC	# Sprite RPC Protocol
+larp	91	LARP		# Locus Address Resolution Protocol
+mtp	92	MTP		# Multicast Transport Protocol
+ax.25	93	AX.25		# AX.25 Frames
+ipip	94	IPIP		# Yet Another IP encapsulation
+micp	95	MICP		# Mobile Internetworking Control Pro.
+scc-sp	96	SCC-SP		# Semaphore Communications Sec. Pro.
+etherip	97	ETHERIP		# Ethernet-within-IP Encapsulation
+encap	98	ENCAP		# Yet Another IP encapsulation
+#	99			# any private encryption scheme
+gmtp	100	GMTP		# GMTP
+ifmp	101	IFMP		# Ipsilon Flow Management Protocol
+pnni	102	PNNI		# PNNI over IP
+pim	103	PIM		# Protocol Independent Multicast
+aris	104	ARIS		# ARIS
+scps	105	SCPS		# SCPS
+qnx	106	QNX		# QNX
+a/n	107	A/N		# Active Networks
+ipcomp	108	IPComp		# IP Payload Compression Protocol
+snp	109	SNP		# Sitara Networks Protocol
+compaq-peer	110	Compaq-Peer	# Compaq Peer Protocol
+ipx-in-ip	111	IPX-in-IP	# IPX in IP
+vrrp	112	VRRP		# Virtual Router Redundancy Protocol
+pgm	113	PGM		# PGM Reliable Transport Protocol
+#	114			# any 0-hop protocol
+l2tp	115	L2TP		# Layer Two Tunneling Protocol
+ddx	116	DDX		# D-II Data Exchange
+iatp	117	IATP		# Interactive Agent Transfer Protocol
+stp	118	STP		# Schedule Transfer
+srp	119	SRP		# SpectraLink Radio Protocol
+uti	120	UTI		# UTI
+smp	121	SMP		# Simple Message Protocol
+sm	122	SM		# SM
+ptp	123	PTP		# Performance Transparency Protocol
+isis	124	ISIS		# ISIS over IPv4
+fire	125	FIRE
+crtp	126	CRTP		# Combat Radio Transport Protocol
+crdup	127	CRUDP		# Combat Radio User Datagram
+sscopmce	128	SSCOPMCE
+iplt	129	IPLT
+sps	130	SPS		# Secure Packet Shield
+pipe	131	PIPE		# Private IP Encapsulation within IP
+sctp	132	SCTP		# Stream Control Transmission Protocol
+fc	133	FC		# Fibre Channel
+# rsvp-e2e-ignore	134	RSVP-E2E-IGNORE
+#	134-254			# Unassigned
+#	255			# Reserved
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/resolv.conf b/target/device/Atmel/atngw100-base/target_skeleton/etc/resolv.conf
new file mode 120000
index 000000000..71f6f9657
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/resolv.conf
@@ -0,0 +1 @@
+../tmp/resolv.conf
\ No newline at end of file
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/services b/target/device/Atmel/atngw100-base/target_skeleton/etc/services
new file mode 100644
index 000000000..e2ffd3df5
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/services
@@ -0,0 +1,2117 @@
+#
+# Network services, Internet style
+#
+# Note that it is presently the policy of IANA to assign a single well-known
+# port number for both TCP and UDP; hence, most entries here have two entries
+# even if the protocol doesn't support UDP operations.
+#
+# The latest IANA port assignments can be gotten from
+#
+#	http://www.iana.org/assignments/port-numbers
+#
+# The Well Known Ports are those from 0 through 1023.
+# The Registered Ports are those from 1024 through 49151
+# The Dynamic and/or Private Ports are those from 49152 through 65535
+#
+# Kerberos services are for Kerberos v4, and are unofficial.  Sites running
+# v5 should uncomment v5 entries and comment v4 entries.
+#
+# $FreeBSD: src/etc/services,v 1.102.8.1 2006/01/29 11:32:48 maxim Exp $
+#	From: @(#)services	5.8 (Berkeley) 5/9/91
+#
+# WELL KNOWN PORT NUMBERS
+#
+rtmp		  1/ddp	   #Routing Table Maintenance Protocol
+tcpmux		  1/tcp	   #TCP Port Service Multiplexer
+tcpmux		  1/udp	   #TCP Port Service Multiplexer
+nbp		  2/ddp	   #Name Binding Protocol
+compressnet	  2/tcp	   #Management Utility
+compressnet	  2/udp	   #Management Utility
+compressnet	  3/tcp	   #Compression Process
+compressnet	  3/udp	   #Compression Process
+echo		  4/ddp	   #AppleTalk Echo Protocol
+rje		  5/tcp	   #Remote Job Entry
+rje		  5/udp	   #Remote Job Entry
+zip		  6/ddp	   #Zone Information Protocol
+echo		  7/tcp
+echo		  7/udp
+discard		  9/tcp	   sink null
+discard		  9/udp	   sink null
+systat		 11/tcp	   users	#Active Users
+systat		 11/udp	   users	#Active Users
+daytime		 13/tcp
+daytime		 13/udp
+qotd		 17/tcp	   quote	#Quote of the Day
+qotd		 17/udp	   quote	#Quote of the Day
+msp		 18/tcp	   #Message Send Protocol
+msp		 18/udp	   #Message Send Protocol
+chargen		 19/tcp	   ttytst source	#Character Generator
+chargen		 19/udp	   ttytst source	#Character Generator
+ftp-data	 20/tcp	   #File Transfer [Default Data]
+ftp-data	 20/udp	   #File Transfer [Default Data]
+ftp		 21/tcp	   #File Transfer [Control]
+ftp		 21/udp	   #File Transfer [Control]
+ssh		 22/tcp	   #Secure Shell Login
+ssh		 22/udp	   #Secure Shell Login
+telnet		 23/tcp
+telnet		 23/udp
+#		 24/tcp	   any private mail system
+#		 24/udp	   any private mail system
+smtp		 25/tcp	   mail		#Simple Mail Transfer
+smtp		 25/udp	   mail		#Simple Mail Transfer
+nsw-fe		 27/tcp	   #NSW User System FE
+nsw-fe		 27/udp	   #NSW User System FE
+msg-icp		 29/tcp	   #MSG ICP
+msg-icp		 29/udp	   #MSG ICP
+msg-auth	 31/tcp	   #MSG Authentication
+msg-auth	 31/udp	   #MSG Authentication
+dsp		 33/tcp	   #Display Support Protocol
+dsp		 33/udp	   #Display Support Protocol
+#		 35/tcp	   any private printer server
+#		 35/udp	   any private printer server
+time		 37/tcp	   timserver
+time		 37/udp	   timserver
+rap		 38/tcp	   #Route Access Protocol
+rap		 38/udp	   #Route Access Protocol
+rlp		 39/tcp	   resource	#Resource Location Protocol
+rlp		 39/udp	   resource	#Resource Location Protocol
+graphics	 41/tcp
+graphics	 41/udp
+nameserver	 42/tcp	   name		#Host Name Server
+nameserver	 42/udp	   name		#Host Name Server
+nicname		 43/tcp	   whois
+nicname		 43/udp	   whois
+mpm-flags	 44/tcp	   #MPM FLAGS Protocol
+mpm-flags	 44/udp	   #MPM FLAGS Protocol
+mpm		 45/tcp	   #Message Processing Module [recv]
+mpm		 45/udp	   #Message Processing Module [recv]
+mpm-snd		 46/tcp	   #MPM [default send]
+mpm-snd		 46/udp	   #MPM [default send]
+ni-ftp		 47/tcp	   #NI FTP
+ni-ftp		 47/udp	   #NI FTP
+auditd		 48/tcp	   #Digital Audit Daemon
+auditd		 48/udp	   #Digital Audit Daemon
+tacacs		 49/tcp	   #Login Host Protocol (TACACS)
+tacacs		 49/udp	   #Login Host Protocol (TACACS)
+re-mail-ck	 50/tcp	   #Remote Mail Checking Protocol
+re-mail-ck	 50/udp	   #Remote Mail Checking Protocol
+la-maint	 51/tcp	   #IMP Logical Address Maintenance
+la-maint	 51/udp	   #IMP Logical Address Maintenance
+xns-time	 52/tcp	   #XNS Time Protocol
+xns-time	 52/udp	   #XNS Time Protocol
+domain		 53/tcp	   #Domain Name Server
+domain		 53/udp	   #Domain Name Server
+xns-ch		 54/tcp	   #XNS Clearinghouse
+xns-ch		 54/udp	   #XNS Clearinghouse
+isi-gl		 55/tcp	   #ISI Graphics Language
+isi-gl		 55/udp	   #ISI Graphics Language
+xns-auth	 56/tcp	   #XNS Authentication
+xns-auth	 56/udp	   #XNS Authentication
+mtp		 57/tcp	   # deprecated
+#PROBLEMS!==============================================================
+#		 57/tcp	   any private terminal access
+#PROBLEMS!==============================================================
+#		 57/udp	   any private terminal access
+xns-mail	 58/tcp	   #XNS Mail
+xns-mail	 58/udp	   #XNS Mail
+#		 59/tcp	   any private file service
+#		 59/udp	   any private file service
+ni-mail		 61/tcp	   #NI MAIL
+ni-mail		 61/udp	   #NI MAIL
+acas		 62/tcp	   #ACA Services
+acas		 62/udp	   #ACA Services
+whois++		 63/tcp
+whois++		 63/udp
+covia		 64/tcp	   #Communications Integrator (CI)
+covia		 64/udp	   #Communications Integrator (CI)
+tacacs-ds	 65/tcp	   #TACACS-Database Service
+tacacs-ds	 65/udp	   #TACACS-Database Service
+sql*net		 66/tcp	   #Oracle SQL*NET
+sql*net		 66/udp	   #Oracle SQL*NET
+bootps		 67/tcp	   dhcps	#Bootstrap Protocol Server
+bootps		 67/udp	   dhcps	#Bootstrap Protocol Server
+bootpc		 68/tcp	   dhcpc	#Bootstrap Protocol Client
+bootpc		 68/udp	   dhcpc	#Bootstrap Protocol Client
+tftp		 69/tcp	   #Trivial File Transfer
+tftp		 69/udp	   #Trivial File Transfer
+gopher		 70/tcp
+gopher		 70/udp
+netrjs-1	 71/tcp	   #Remote Job Service
+netrjs-1	 71/udp	   #Remote Job Service
+netrjs-2	 72/tcp	   #Remote Job Service
+netrjs-2	 72/udp	   #Remote Job Service
+netrjs-3	 73/tcp	   #Remote Job Service
+netrjs-3	 73/udp	   #Remote Job Service
+netrjs-4	 74/tcp	   #Remote Job Service
+netrjs-4	 74/udp	   #Remote Job Service
+#		 75/tcp	   any private dial out service
+#		 75/udp	   any private dial out service
+deos		 76/tcp	   #Distributed External Object Store
+deos		 76/udp	   #Distributed External Object Store
+netrjs		 77/tcp
+#PROBLEMS!==============================================================
+#		 77/tcp	   any private RJE service
+#PROBLEMS!==============================================================
+#		 77/udp	   any private RJE service
+vettcp		 78/tcp
+vettcp		 78/udp
+finger		 79/tcp
+finger		 79/udp
+http		 80/tcp	   www www-http	#World Wide Web HTTP
+http		 80/udp	   www www-http	#World Wide Web HTTP
+hosts2-ns	 81/tcp	   #HOSTS2 Name Server
+hosts2-ns	 81/udp	   #HOSTS2 Name Server
+xfer		 82/tcp	   #XFER Utility
+xfer		 82/udp	   #XFER Utility
+mit-ml-dev	 83/tcp	   #MIT ML Device
+mit-ml-dev	 83/udp	   #MIT ML Device
+ctf		 84/tcp	   #Common Trace Facility
+ctf		 84/udp	   #Common Trace Facility
+mit-ml-dev	 85/tcp	   #MIT ML Device
+mit-ml-dev	 85/udp	   #MIT ML Device
+mfcobol		 86/tcp	   #Micro Focus Cobol
+mfcobol		 86/udp	   #Micro Focus Cobol
+ttylink		 87/tcp
+#PROBLEMS!===========================================================
+#		 87/tcp	   any private terminal link
+#PROBLEMS!===========================================================
+#		 87/udp	   any private terminal link
+kerberos-sec	 88/tcp	   kerberos	# krb5	# Kerberos (v5)
+kerberos-sec	 88/udp	   kerberos	# krb5	# Kerberos (v5)
+su-mit-tg	 89/tcp	   #SU/MIT Telnet Gateway
+su-mit-tg	 89/udp	   #SU/MIT Telnet Gateway
+dnsix		 90/tcp	   #DNSIX Securit Attribute Token Map
+dnsix		 90/udp	   #DNSIX Securit Attribute Token Map
+mit-dov		 91/tcp	   #MIT Dover Spooler
+mit-dov		 91/udp	   #MIT Dover Spooler
+npp		 92/tcp	   #Network Printing Protocol
+npp		 92/udp	   #Network Printing Protocol
+dcp		 93/tcp	   #Device Control Protocol
+dcp		 93/udp	   #Device Control Protocol
+objcall		 94/tcp	   #Tivoli Object Dispatcher
+objcall		 94/udp	   #Tivoli Object Dispatcher
+supdup		 95/tcp
+supdup		 95/udp
+dixie		 96/tcp	   #DIXIE Protocol Specification
+dixie		 96/udp	   #DIXIE Protocol Specification
+swift-rvf	 97/tcp	   #Swift Remote Virtural File Protocol
+swift-rvf	 97/udp	   #Swift Remote Virtural File Protocol
+tacnews		 98/tcp	   #TAC News, Unofficial: Red Hat linuxconf
+tacnews		 98/udp	   #TAC News, Unofficial: Red Hat linuxconf
+metagram	 99/tcp	   #Metagram Relay
+metagram	 99/udp	   #Metagram Relay
+newacct		100/tcp	   #[unauthorized use]
+hostname	101/tcp	   hostnames	#NIC Host Name Server
+hostname	101/udp	   hostnames	#NIC Host Name Server
+iso-tsap	102/tcp	   tsap		#ISO-TSAP Class 0
+iso-tsap	102/udp	   tsap		#ISO-TSAP Class 0
+gppitnp		103/tcp	   #Genesis Point-to-Point Trans Net
+gppitnp		103/udp	   #Genesis Point-to-Point Trans Net
+acr-nema	104/tcp	   #ACR-NEMA Digital Imag. & Comm. 300
+acr-nema	104/udp	   #ACR-NEMA Digital Imag. & Comm. 300
+csnet-ns	105/tcp	   cso-ns cso	#Mailbox Name Nameserver
+csnet-ns	105/udp	   cso-ns cso	#Mailbox Name Nameserver
+pop3pw		106/tcp	   3com-tsmux	#Eudora compatible PW changer
+3com-tsmux	106/udp
+rtelnet		107/tcp	   #Remote Telnet Service
+rtelnet		107/udp	   #Remote Telnet Service
+snagas		108/tcp	   #SNA Gateway Access Server
+snagas		108/udp	   #SNA Gateway Access Server
+pop2		109/tcp	   postoffice	#Post Office Protocol - Version 2
+pop2		109/udp	   postoffice	#Post Office Protocol - Version 2
+pop3		110/tcp	   #Post Office Protocol - Version 3
+pop3		110/udp	   #Post Office Protocol - Version 3
+sunrpc		111/tcp	   rpcbind	#SUN Remote Procedure Call
+sunrpc		111/udp	   rpcbind	#SUN Remote Procedure Call
+mcidas		112/tcp	   #McIDAS Data Transmission Protocol
+mcidas		112/udp	   #McIDAS Data Transmission Protocol
+auth		113/tcp	   ident tap	#Authentication Service
+auth		113/udp	   ident tap	#Authentication Service
+audionews	114/tcp	   #Audio News Multicast
+audionews	114/udp	   #Audio News Multicast
+sftp		115/tcp	   #Simple File Transfer Protocol
+sftp		115/udp	   #Simple File Transfer Protocol
+ansanotify	116/tcp	   #ANSA REX Notify
+ansanotify	116/udp	   #ANSA REX Notify
+uucp-path	117/tcp	   #UUCP Path Service
+uucp-path	117/udp	   #UUCP Path Service
+sqlserv		118/tcp	   #SQL Services
+sqlserv		118/udp	   #SQL Services
+nntp		119/tcp	   usenet	#Network News Transfer Protocol
+nntp		119/udp	   usenet	#Network News Transfer Protocol
+cfdptkt		120/tcp
+cfdptkt		120/udp
+erpc		121/tcp	   #Encore Expedited Remote Pro.Call
+erpc		121/udp	   #Encore Expedited Remote Pro.Call
+smakynet	122/tcp
+smakynet	122/udp
+ntp		123/tcp	   #Network Time Protocol
+ntp		123/udp	   #Network Time Protocol
+ansatrader	124/tcp	   #ANSA REX Trader
+ansatrader	124/udp	   #ANSA REX Trader
+locus-map	125/tcp	   #Locus PC-Interface Net Map Ser
+locus-map	125/udp	   #Locus PC-Interface Net Map Ser
+unitary		126/tcp	   #Unisys Unitary Login
+unitary		126/udp	   #Unisys Unitary Login
+locus-con	127/tcp	   #Locus PC-Interface Conn Server
+locus-con	127/udp	   #Locus PC-Interface Conn Server
+gss-xlicen	128/tcp	   #GSS X License Verification
+gss-xlicen	128/udp	   #GSS X License Verification
+pwdgen		129/tcp	   #Password Generator Protocol
+pwdgen		129/udp	   #Password Generator Protocol
+cisco-fna	130/tcp	   #cisco FNATIVE
+cisco-fna	130/udp	   #cisco FNATIVE
+cisco-tna	131/tcp	   #cisco TNATIVE
+cisco-tna	131/udp	   #cisco TNATIVE
+cisco-sys	132/tcp	   #cisco SYSMAINT
+cisco-sys	132/udp	   #cisco SYSMAINT
+statsrv		133/tcp	   #Statistics Service
+statsrv		133/udp	   #Statistics Service
+ingres-net	134/tcp	   #INGRES-NET Service
+ingres-net	134/udp	   #INGRES-NET Service
+loc-srv		135/tcp	   epmap	#Location Service
+loc-srv		135/udp	   epmap	#Location Service
+profile		136/tcp	   #PROFILE Naming System
+profile		136/udp	   #PROFILE Naming System
+netbios-ns	137/tcp	   #NETBIOS Name Service
+netbios-ns	137/udp	   #NETBIOS Name Service
+netbios-dgm	138/tcp	   #NETBIOS Datagram Service
+netbios-dgm	138/udp	   #NETBIOS Datagram Service
+netbios-ssn	139/tcp	   #NETBIOS Session Service
+netbios-ssn	139/udp	   #NETBIOS Session Service
+emfis-data	140/tcp	   #EMFIS Data Service
+emfis-data	140/udp	   #EMFIS Data Service
+emfis-cntl	141/tcp	   #EMFIS Control Service
+emfis-cntl	141/udp	   #EMFIS Control Service
+bl-idm		142/tcp	   #Britton-Lee IDM
+bl-idm		142/udp	   #Britton-Lee IDM
+imap		143/tcp	   imap2 imap4	#Interim Mail Access Protocol v2
+imap		143/udp	   imap2 imap4	#Interim Mail Access Protocol v2
+NeWS		144/tcp	   # Window System
+NeWS		144/udp	   # Window System
+#PROBLEMS!==============================================================
+#uma		144/tcp	   #Universal Management Architecture
+#uma		144/udp	   #Universal Management Architecture
+#PROBLEMS!==============================================================
+uaac		145/tcp	   #UAAC Protocol
+uaac		145/udp	   #UAAC Protocol
+iso-tp0		146/tcp
+iso-tp0		146/udp
+iso-ip		147/tcp
+iso-ip		147/udp
+cronus		148/tcp	   jargon	#CRONUS-SUPPORT
+cronus		148/udp	   jargon	#CRONUS-SUPPORT
+aed-512		149/tcp	   #AED 512 Emulation Service
+aed-512		149/udp	   #AED 512 Emulation Service
+sql-net		150/tcp
+sql-net		150/udp
+hems		151/tcp
+hems		151/udp
+bftp		152/tcp	   #Background File Transfer Program
+bftp		152/udp	   #Background File Transfer Program
+sgmp		153/tcp
+sgmp		153/udp
+netsc-prod	154/tcp
+netsc-prod	154/udp
+netsc-dev	155/tcp
+netsc-dev	155/udp
+sqlsrv		156/tcp	   #SQL Service
+sqlsrv		156/udp	   #SQL Service
+knet-cmp	157/tcp	   #KNET/VM Command/Message Protocol
+knet-cmp	157/udp	   #KNET/VM Command/Message Protocol
+pcmail-srv	158/tcp	   #PCMail Server
+pcmail-srv	158/udp	   #PCMail Server
+nss-routing	159/tcp
+nss-routing	159/udp
+sgmp-traps	160/tcp
+sgmp-traps	160/udp
+snmp		161/tcp
+snmp		161/udp
+snmptrap	162/tcp	   snmp-trap
+snmptrap	162/udp	   snmp-trap
+cmip-man	163/tcp	   #CMIP/TCP Manager
+cmip-man	163/udp	   #CMIP/TCP Manager
+cmip-agent	164/tcp	   #CMIP/TCP Agent
+smip-agent	164/udp	   #CMIP/TCP Agent
+xns-courier	165/tcp	   #Xerox
+xns-courier	165/udp	   #Xerox
+s-net		166/tcp	   #Sirius Systems
+s-net		166/udp	   #Sirius Systems
+namp		167/tcp
+namp		167/udp
+rsvd		168/tcp
+rsvd		168/udp
+send		169/tcp
+send		169/udp
+print-srv	170/tcp	   #Network PostScript
+print-srv	170/udp	   #Network PostScript
+multiplex	171/tcp	   #Network Innovations Multiplex
+multiplex	171/udp	   #Network Innovations Multiplex
+cl/1		172/tcp	   #Network Innovations CL/1
+cl/1		172/udp	   #Network Innovations CL/1
+xyplex-mux	173/tcp
+xyplex-mux	173/udp
+mailq		174/tcp
+mailq		174/udp
+vmnet		175/tcp
+vmnet		175/udp
+genrad-mux	176/tcp
+genrad-mux	176/udp
+xdmcp		177/tcp	   #X Display Manager Control Protocol
+xdmcp		177/udp	   #X Display Manager Control Protocol
+NextStep	178/tcp	   nextstep NeXTStep	#NextStep Window Server
+NextStep	178/udp	   nextstep NeXTStep	#NextStep Window Server
+bgp		179/tcp	   #Border Gateway Protocol
+bgp		179/udp	   #Border Gateway Protocol
+ris		180/tcp	   #Intergraph
+ris		180/udp	   #Intergraph
+unify		181/tcp
+unify		181/udp
+audit		182/tcp	   #Unisys Audit SITP
+audit		182/udp	   #Unisys Audit SITP
+ocbinder	183/tcp
+ocbinder	183/udp
+ocserver	184/tcp
+ocserver	184/udp
+remote-kis	185/tcp
+remote-kis	185/udp
+kis		186/tcp	   #KIS Protocol
+kis		186/udp	   #KIS Protocol
+aci		187/tcp	   #Application Communication Interface
+aci		187/udp	   #Application Communication Interface
+mumps		188/tcp	   #Plus Five's MUMPS
+mumps		188/udp	   #Plus Five's MUMPS
+qft		189/tcp	   #Queued File Transport
+qft		189/udp	   #Queued File Transport
+gacp		190/tcp	   #Gateway Access Control Protocol
+gacp		190/udp	   cacp		#Gateway Access Control Protocol
+prospero	191/tcp	   #Prospero Directory Service
+prospero	191/udp	   #Prospero Directory Service
+osu-nms		192/tcp	   #OSU Network Monitoring System
+osu-nms		192/udp	   #OSU Network Monitoring System
+srmp		193/tcp	   #Spider Remote Monitoring Protocol
+srmp		193/udp	   #Spider Remote Monitoring Protocol
+irc		194/tcp	   #Internet Relay Chat Protocol
+irc		194/udp	   #Internet Relay Chat Protocol
+dn6-nlm-aud	195/tcp	   #DNSIX Network Level Module Audit
+dn6-nlm-aud	195/udp	   #DNSIX Network Level Module Audit
+dn6-smm-red	196/tcp	   #DNSIX Session Mgt Module Audit Redir
+dn6-smm-red	196/udp	   #DNSIX Session Mgt Module Audit Redir
+dls		197/tcp	   #Directory Location Service
+dls		197/udp	   #Directory Location Service
+dls-mon		198/tcp	   #Directory Location Service Monitor
+dls-mon		198/udp	   #Directory Location Service Monitor
+smux		199/tcp
+smux		199/udp
+src		200/tcp	   #IBM System Resource Controller
+src		200/udp	   #IBM System Resource Controller
+at-rtmp		201/tcp	   #AppleTalk Routing Maintenance
+at-rtmp		201/udp	   #AppleTalk Routing Maintenance
+at-nbp		202/tcp	   #AppleTalk Name Binding
+at-nbp		202/udp	   #AppleTalk Name Binding
+at-3		203/tcp	   #AppleTalk Unused
+at-3		203/udp	   #AppleTalk Unused
+at-echo		204/tcp	   #AppleTalk Echo
+at-echo		204/udp	   #AppleTalk Echo
+at-5		205/tcp	   #AppleTalk Unused
+at-5		205/udp	   #AppleTalk Unused
+at-zis		206/tcp	   #AppleTalk Zone Information
+at-zis		206/udp	   #AppleTalk Zone Information
+at-7		207/tcp	   #AppleTalk Unused
+at-7		207/udp	   #AppleTalk Unused
+at-8		208/tcp	   #AppleTalk Unused
+at-8		208/udp	   #AppleTalk Unused
+qmtp		209/tcp	   #The Quick Mail Transfer Protocol
+qmtp		209/udp	   #The Quick Mail Transfer Protocol
+#PROBLEMS!==============================================================
+#tam		209/tcp	   #Trivial Authenticated Mail Protocol
+#tam		209/udp	   #Trivial Authenticated Mail Protocol
+#PROBLEMS!==============================================================
+z39.50		210/tcp	   wais		#ANSI Z39.50
+z39.50		210/udp	   wais		#ANSI Z39.50
+914c/g		211/tcp	   #Texas Instruments 914C/G Terminal
+914c/g		211/udp	   #Texas Instruments 914C/G Terminal
+anet		212/tcp	   #ATEXSSTR
+anet		212/udp	   #ATEXSSTR
+ipx		213/tcp
+ipx		213/udp
+vmpwscs		214/tcp
+vmpwscs		214/udp
+softpc		215/tcp	   #Insignia Solutions
+softpc		215/udp	   #Insignia Solutions
+CAIlic		216/tcp	   atls		#Computer Associates Int'l License Server
+CAIlic		216/udp	   atls		#Computer Associates Int'l License Server
+dbase		217/tcp	   #dBASE Unix
+dbase		217/udp	   #dBASE Unix
+mpp		218/tcp	   #Netix Message Posting Protocol
+mpp		218/udp	   #Netix Message Posting Protocol
+uarps		219/tcp	   #Unisys ARPs
+uarps		219/udp	   #Unisys ARPs
+#imap3@220 was never used and never should have been allocated. See PR 46294.
+#imap3		220/tcp	   #Interactive Mail Access Protocol v3
+#imap3		220/udp	   #Interactive Mail Access Protocol v3
+fln-spx		221/tcp	   #Berkeley rlogind with SPX auth
+fln-spx		221/udp	   #Berkeley rlogind with SPX auth
+rsh-spx		222/tcp	   #Berkeley rshd with SPX auth
+rsh-spx		222/udp	   #Berkeley rshd with SPX auth
+cdc		223/tcp	   #Certificate Distribution Center
+cdc		223/udp	   #Certificate Distribution Center
+direct		242/tcp
+direct		242/udp
+sur-meas	243/tcp	   #Survey Measurement
+sur-meas	243/udp	   #Survey Measurement
+dayna		244/tcp
+dayna		244/udp
+link		245/tcp
+link		245/udp
+dsp3270		246/tcp	   #Display Systems Protocol
+dsp3270		246/udp	   #Display Systems Protocol
+subntbcst_tftp	247/tcp	   #subntbcst_tftp
+subntbcst_tftp	247/udp	   #subntbcst_tftp
+bhfhs		248/tcp
+bhfhs		248/udp
+#		249-255    reserved
+rap		256/tcp
+rap		256/udp
+set		257/tcp	   #secure electronic transaction
+set		257/udp	   #secure electronic transaction
+yak-chat	258/tcp	   #yak winsock personal chat
+yak-chat	258/udp	   #yak winsock personal chat
+esro-gen	259/tcp	   #efficient short remote operations
+esro-gen	259/udp	   #efficient short remote operations
+openport	260/tcp
+openport	260/udp
+nsiiops		261/tcp	   #iiop name service over tls/ssl
+nsiiops		261/udp	   #iiop name service over tls/ssl
+arcisdms	262/tcp
+arcisdms	262/udp
+hdap		263/tcp
+hdap		263/udp
+bgmp		264/tcp
+bgmp		264/udp
+#		265-279	   unassigned
+http-mgmt	280/tcp
+http-mgmt	280/udp
+personal-link	281/tcp
+personal-link	281/udp
+cableport-ax	282/tcp	   #cable port a/x
+cableport-ax	282/udp	   #cable port a/x
+#		283-307    unassigned
+novastorbakcup	308/tcp	   #novastor backup
+novastorbakcup	308/udp	   #novastor backup
+entrusttime	309/tcp
+entrusttime	309/udp
+bhmds		310/tcp
+bhmds		310/udp
+asip-webadmin	311/tcp	   #appleshare ip webadmin
+asip-webadmin	311/udp	   #appleshare ip webadmin
+vslmp		312/tcp
+vslmp		312/udp
+magenta-logic	313/tcp
+magenta-logic	313/udp
+opalis-robot	314/tcp
+opalis-robot	314/udp
+dpsi		315/tcp
+dpsi		315/udp
+decauth		316/tcp
+decauth		316/udp
+zannet		317/tcp
+zannet		317/udp
+#		318-320	   #unassigned
+pip		321/tcp
+pip		321/udp
+#		322-343	   #unassigned
+pdap		344/tcp	   #Prospero Data Access Protocol
+pdap		344/udp	   #Prospero Data Access Protocol
+pawserv		345/tcp	   #Perf Analysis Workbench
+pawserv		345/udp	   #Perf Analysis Workbench
+zserv		346/tcp	   #Zebra server
+zserv		346/udp	   #Zebra server
+fatserv		347/tcp	   #Fatmen Server
+fatserv		347/udp	   #Fatmen Server
+csi-sgwp	348/tcp	   #Cabletron Management Protocol
+csi-sgwp	348/udp	   #Cabletron Management Protocol
+mftp		349/tcp
+mftp		349/udp
+matip-type-a	350/tcp	   #MATIP Type A
+matip-type-a	350/udp
+matip-type-b	351/tcp	   #MATIP Type B
+matip-type-b	351/udp
+bhoetty		351/tcp	   #unassigned but widespread use
+bhoetty		351/udp	   #unassigned but widespread use
+dtag-ste-sb	352/tcp	   #DTAG
+dtag-ste-sb	352/udp	   #DTAG
+bhoedap4	352/tcp	   #unassigned but widespread use
+bhoedap4	352/udp	   #unassigned but widespread use
+ndsauth		353/tcp
+ndsauth		353/udp
+bh611		354/tcp
+bh611		354/udp
+datex-asn	355/tcp
+datex-asn	355/udp
+cloanto-net-1	356/tcp	   #Cloanto Net 1
+cloanto-net-1	356/udp
+bhevent		357/tcp
+bhevent		357/udp
+shrinkwrap	358/tcp
+shrinkwrap	358/udp
+tenebris_nts	359/tcp	   #Tenebris Network Trace Service
+tenebris_nts	359/udp	   #Tenebris Network Trace Service
+scoi2odialog	360/tcp
+scoi2odialog	360/udp
+semantix	361/tcp
+semantix	361/udp
+srssend		362/tcp	   #SRS Send
+srssend		362/udp	   #SRS Send
+rsvp_tunnel	363/tcp
+rsvp_tunnel	363/udp
+aurora-cmgr	364/tcp
+aurora-cmgr	364/udp
+dtk		365/tcp	   #Deception Tool Kit - Fred Cohen <fc@all.net>
+dtk		365/udp	   #Deception Tool Kit - Fred Cohen <fc@all.net>
+odmr		366/tcp
+odmr		366/udp
+mortgageware	367/tcp
+mortgageware	367/udp
+qbikgdp		368/tcp	   #QbikGDP
+qbikgdp		368/udp
+rpc2portmap	369/tcp
+rpc2portmap	369/udp
+codaauth2	370/tcp
+codaauth2	370/udp
+clearcase	371/tcp
+clearcase	371/udp
+ulistserv	372/tcp	   ulistproc	#Unix Listserv
+ulistserv	372/udp	   ulistproc	#Unix Listserv
+legent-1	373/tcp	   #Legent Corporation (now Computer Associates Intl.)
+legent-1	373/udp	   #Legent Corporation (now Computer Associates Intl.)
+legent-2	374/tcp	   #Legent Corporation (now Computer Associates Intl.)
+legent-2	374/udp	   #Legent Corporation (now Computer Associates Intl.)
+hassle		375/tcp
+hassle		375/udp
+nip		376/tcp	   #Amiga Envoy Network Inquiry Proto
+nip		376/udp	   #Amiga Envoy Network Inquiry Proto
+tnETOS		377/tcp	   #NEC Corporation
+tnETOS		377/udp	   #NEC Corporation
+dsETOS		378/tcp	   #NEC Corporation
+dsETOS		378/udp	   #NEC Corporation
+is99c		379/tcp	   #TIA/EIA/IS-99 modem client
+is99c		379/udp	   #TIA/EIA/IS-99 modem client
+is99s		380/tcp	   #TIA/EIA/IS-99 modem server
+is99s		380/udp	   #TIA/EIA/IS-99 modem server
+hp-collector	381/tcp	   #hp performance data collector
+hp-collector	381/udp	   #hp performance data collector
+hp-managed-node	382/tcp	   #hp performance data managed node
+hp-managed-node	382/udp	   #hp performance data managed node
+hp-alarm-mgr	383/tcp	   #hp performance data alarm manager
+hp-alarm-mgr	383/udp	   #hp performance data alarm manager
+arns		384/tcp	   #A Remote Network Server System
+arns		384/udp	   #A Remote Network Server System
+ibm-app		385/tcp	   #IBM Application
+ibm-app		385/udp	   #IBM Application
+asa		386/tcp	   #ASA Message Router Object Def.
+asa		386/udp	   #ASA Message Router Object Def.
+aurp		387/tcp	   #Appletalk Update-Based Routing Pro.
+aurp		387/udp	   #Appletalk Update-Based Routing Pro.
+unidata-ldm	388/tcp	   #Unidata LDM Version 4
+unidata-ldm	388/udp	   #Unidata LDM Version 4
+ldap		389/tcp	   #Lightweight Directory Access Protocol
+ldap		389/udp	   #Lightweight Directory Access Protocol
+uis		390/tcp
+uis		390/udp
+synotics-relay	391/tcp	   #SynOptics SNMP Relay Port
+synotics-relay	391/udp	   #SynOptics SNMP Relay Port
+synotics-broker	392/tcp	   #SynOptics Port Broker Port
+synotics-broker	392/udp	   #SynOptics Port Broker Port
+dis		393/tcp	   #Data Interpretation System
+dis		393/udp	   #Data Interpretation System
+embl-ndt	394/tcp	   #EMBL Nucleic Data Transfer
+embl-ndt	394/udp	   #EMBL Nucleic Data Transfer
+netcp		395/tcp	   #NETscout Control Protocol
+netcp		395/udp	   #NETscout Control Protocol
+netware-ip	396/tcp	   #Novell Netware over IP
+netware-ip	396/udp	   #Novell Netware over IP
+mptn		397/tcp	   #Multi Protocol Trans. Net.
+mptn		397/udp	   #Multi Protocol Trans. Net.
+kryptolan	398/tcp
+kryptolan	398/udp
+iso-tsap-c2	399/tcp	   #ISO-TSAP Class 2
+iso-tsap-c2	399/udp	   #ISO-TSAP Class 2
+work-sol	400/tcp	   #Workstation Solutions
+work-sol	400/udp	   #Workstation Solutions
+ups		401/tcp	   #Uninterruptible Power Supply
+ups		401/udp	   #Uninterruptible Power Supply
+genie		402/tcp	   #Genie Protocol
+genie		402/udp	   #Genie Protocol
+decap		403/tcp
+decap		403/udp
+nced		404/tcp
+nced		404/udp
+ncld		405/tcp
+ncld		405/udp
+imsp		406/tcp	   #Interactive Mail Support Protocol
+imsp		406/udp	   #Interactive Mail Support Protocol
+timbuktu	407/tcp
+timbuktu	407/udp
+prm-sm		408/tcp	   #Prospero Resource Manager Sys. Man.
+prm-sm		408/udp	   #Prospero Resource Manager Sys. Man.
+prm-nm		409/tcp	   #Prospero Resource Manager Node Man.
+prm-nm		409/udp	   #Prospero Resource Manager Node Man.
+decladebug	410/tcp	   #DECLadebug Remote Debug Protocol
+decladebug	410/udp	   #DECLadebug Remote Debug Protocol
+rmt		411/tcp	   #Remote MT Protocol
+rmt		411/udp	   #Remote MT Protocol
+synoptics-trap	412/tcp	   #Trap Convention Port
+synoptics-trap	412/udp	   #Trap Convention Port
+smsp		413/tcp
+smsp		413/udp
+infoseek	414/tcp
+infoseek	414/udp
+bnet		415/tcp
+bnet		415/udp
+silverplatter	416/tcp
+silverplatter	416/udp
+onmux		417/tcp
+onmux		417/udp
+hyper-g		418/tcp
+hyper-g		418/udp
+ariel1		419/tcp
+ariel1		419/udp
+smpte		420/tcp
+smpte		420/udp
+ariel2		421/tcp
+ariel2		421/udp
+ariel3		422/tcp
+ariel3		422/udp
+opc-job-start	423/tcp	   #IBM Operations Planning and Control Start
+opc-job-start	423/udp	   #IBM Operations Planning and Control Start
+opc-job-track	424/tcp	   #IBM Operations Planning and Control Track
+opc-job-track	424/udp	   #IBM Operations Planning and Control Track
+icad-el		425/tcp
+icad-el		425/udp
+smartsdp	426/tcp
+smartsdp	426/udp
+svrloc		427/tcp	   #Server Location
+svrloc		427/udp	   #Server Location
+ocs_cmu		428/tcp
+ocs_cmu		428/udp
+ocs_amu		429/tcp
+ocs_amu		429/udp
+utmpsd		430/tcp
+utmpsd		430/udp
+utmpcd		431/tcp
+utmpcd		431/udp
+iasd		432/tcp
+iasd		432/udp
+nnsp		433/tcp
+nnsp		433/udp
+mobileip-agent	434/tcp
+mobileip-agent	434/udp
+mobilip-mn	435/tcp
+mobilip-mn	435/udp
+dna-cml		436/tcp
+dna-cml		436/udp
+comscm		437/tcp
+comscm		437/udp
+dsfgw		438/tcp
+dsfgw		438/udp
+dasp		439/tcp
+dasp		439/udp
+sgcp		440/tcp
+sgcp		440/udp
+decvms-sysmgt	441/tcp
+decvms-sysmgt	441/udp
+cvc_hostd	442/tcp
+cvc_hostd	442/udp
+https		443/tcp
+https		443/udp
+snpp		444/tcp	   #Simple Network Paging Protocol
+snpp		444/udp	   #Simple Network Paging Protocol
+#			   [RFC1568]
+microsoft-ds	445/tcp
+microsoft-ds	445/udp
+ddm-rdb		446/tcp
+ddm-rdb		446/udp
+ddm-dfm		447/tcp
+ddm-dfm		447/udp
+ddm-ssl		448/tcp	   ddm-byte
+ddm-ssl		448/udp	   ddm-byte
+as-servermap	449/tcp	   #AS Server Mapper
+as-servermap	449/udp	   #AS Server Mapper
+tserver		450/tcp
+tserver		450/udp
+sfs-smp-net	451/tcp	   #Cray Network Semaphore server
+sfs-smp-net	451/udp	   #Cray Network Semaphore server
+sfs-config	452/tcp	   #Cray SFS config server
+sfs-config	452/udp	   #Cray SFS config server
+creativeserver	453/tcp	   #CreativeServer
+creativeserver	453/udp	   #CreativeServer
+contentserver	454/tcp	   #ContentServer
+contentserver	454/udp	   #ContentServer
+creativepartnr	455/tcp	   #CreativePartnr
+creativepartnr	455/udp	   #CreativePartnr
+macon-tcp	456/tcp
+macon-udp	456/udp
+scohelp		457/tcp
+scohelp		457/udp
+appleqtc	458/tcp	   #apple quick time
+appleqtc	458/udp	   #apple quick time
+ampr-rcmd	459/tcp
+ampr-rcmd	459/udp
+skronk		460/tcp
+skronk		460/udp
+datasurfsrv	461/tcp
+datasurfsrv	461/udp
+datasurfsrvsec	462/tcp
+datasurfsrvsec	462/udp
+alpes		463/tcp
+alpes		463/udp
+#
+kpasswd5	464/tcp	   # Kerberos (v5)
+kpasswd5	464/udp	   # Kerberos (v5)
+#PROBLEMS!==============================================================
+# IANA has offically assigned these two ports as ``kpasswd''
+#kpasswd	464/tcp    # Kerberos (v5)
+#kpasswd	464/udp    # Kerberos (v5)
+#PROBLEMS!==============================================================
+smtps		465/tcp	   #smtp protocol over TLS/SSL (was ssmtp)
+smtps		465/udp	   #smtp protocol over TLS/SSL (was ssmtp)
+digital-vrc	466/tcp
+digital-vrc	466/udp
+mylex-mapd	467/tcp
+mylex-mapd	467/udp
+photuris	468/tcp
+photuris	468/udp
+rcp		469/tcp	   #Radio Control Protocol
+rcp		469/udp	   #Radio Control Protocol
+scx-proxy	470/tcp
+scx-proxy	470/udp
+mondex		471/tcp
+mondex		471/udp
+ljk-login	472/tcp
+ljk-login	472/udp
+hybrid-pop	473/tcp
+hybrid-pop	473/udp
+tn-tl-w1	474/tcp
+tn-tl-w2	474/udp
+tcpnethaspsrv	475/tcp
+tcpnethaspsrv	475/udp
+tn-tl-fd1	476/tcp
+tn-tl-fd1	476/udp
+ss7ns		477/tcp
+ss7ns		477/udp
+spsc		478/tcp
+spsc		478/udp
+iafserver	479/tcp
+iafserver	479/udp
+iafdbase	480/tcp
+iafdbase	480/udp
+ph		481/tcp
+ph		481/udp
+bgs-nsi		482/tcp
+bgs-nsi		482/udp
+ulpnet		483/tcp
+ulpnet		483/udp
+integra-sme	484/tcp	   #Integra Software Management Environment
+integra-sme	484/udp	   #Integra Software Management Environment
+powerburst	485/tcp	   #Air Soft Power Burst
+powerburst	485/udp	   #Air Soft Power Burst
+avian		486/tcp
+avian		486/udp
+saft		487/tcp	   #saft Simple Asynchronous File Transfer
+saft		487/udp	   #saft Simple Asynchronous File Transfer
+gss-http	488/tcp
+gss-http	488/udp
+nest-protocol	489/tcp
+nest-protocol	489/udp
+micom-pfs	490/tcp
+micom-pfs	490/udp
+go-login	491/tcp
+go-login	491/udp
+ticf-1		492/tcp	   #Transport Independent Convergence for FNA
+ticf-1		492/udp	   #Transport Independent Convergence for FNA
+ticf-2		493/tcp	   #Transport Independent Convergence for FNA
+ticf-2		493/udp	   #Transport Independent Convergence for FNA
+pov-ray		494/tcp
+pov-ray		494/udp
+intecourier	495/tcp
+intecourier	495/udp
+pim-rp-disc	496/tcp
+pim-rp-disc	496/udp
+dantz		497/tcp
+dantz		497/udp
+siam		498/tcp
+siam		498/udp
+iso-ill		499/tcp	   #ISO ILL Protocol
+iso-ill		499/udp	   #ISO ILL Protocol
+isakmp		500/tcp
+isakmp		500/udp
+stmf		501/tcp
+stmf		501/udp
+asa-appl-proto	502/tcp
+asa-appl-proto	502/udp
+intrinsa	503/tcp
+intrinsa	503/udp
+citadel		504/tcp
+citadel		504/udp
+mailbox-lm	505/tcp
+mailbox-lm	505/udp
+ohimsrv		506/tcp
+ohimsrv		506/udp
+crs		507/tcp
+crs		507/udp
+xvttp		508/tcp
+xvttp		508/udp
+snare		509/tcp
+snare		509/udp
+fcp		510/tcp	   #FirstClass Protocol
+fcp		510/udp	   #FirstClass Protocol
+passgo		511/tcp
+passgo		511/udp
+#
+# Berkeley-specific services
+#
+exec		512/tcp	   #remote process execution;
+#			   authentication performed using
+#			   passwords and UNIX login names
+biff		512/udp	   comsat	#used by mail system to notify users
+#					of new mail received; currently
+#					receives messages only from
+#					processes on the same machine
+login		513/tcp	   #remote login a la telnet;
+#			   automatic authentication performed
+#			   based on priviledged port numbers
+#			   and distributed data bases which
+#			   identify "authentication domains"
+who		513/udp	   whod		#maintains data bases showing who's
+#					logged in to machines on a local
+#					net and the load average of the
+#					machine
+shell		514/tcp	   cmd		#like exec, but automatic
+#					authentication is performed as for
+#					login server
+syslog		514/udp
+printer		515/tcp	   spooler
+printer		515/udp	   spooler
+videotex	516/tcp
+videotex	516/udp
+talk		517/tcp	   #like tenex link, but across
+#			   machine - unfortunately, doesn't
+#			   use link protocol (this is actually
+#			   just a rendezvous port from which a
+#			   tcp connection is established)
+talk		517/udp	   #like tenex link, but across
+#			   machine - unfortunately, doesn't
+#			   use link protocol (this is actually
+#			   just a rendezvous port from which a
+#			   tcp connection is established)
+ntalk		518/tcp
+ntalk		518/udp
+utime		519/tcp	   unixtime
+utime		519/udp	   unixtime
+efs		520/tcp	   #extended file name server
+router		520/udp	   route routed	#local routing process (on site);
+#					   uses variant of Xerox NS routing
+#					   information protocol
+ripng		521/tcp
+ripng		521/udp
+ulp		522/tcp
+ulp		522/udp
+ibm-db2		523/tcp
+ibm-db2		523/udp
+ncp		524/tcp
+ncp		524/udp
+timed		525/tcp	   timeserver
+timed		525/udp	   timeserver
+tempo		526/tcp	   newdate
+tempo		526/udp	   newdate
+stx		527/tcp	   #Stock IXChange
+stx		527/udp	   #Stock IXChange
+custix		528/tcp	   #Customer IXChange
+custix		528/udp	   #Customer IXChange
+irc-serv	529/tcp
+irc-serv	529/udp
+courier		530/tcp	   rpc
+courier		530/udp	   rpc
+conference	531/tcp	   chat
+conference	531/udp	   chat
+netnews		532/tcp	   readnews
+netnews		532/udp	   readnews
+netwall		533/tcp	   #for emergency broadcasts
+netwall		533/udp	   #for emergency broadcasts
+mm-admin	534/tcp	   #MegaMedia Admin
+mm-admin	534/udp	   #MegaMedia Admin
+iiop		535/tcp
+iiop		535/udp
+opalis-rdv	536/tcp
+opalis-rdv	536/udp
+nmsp		537/tcp	   #Networked Media Streaming Protocol
+nmsp		537/udp	   #Networked Media Streaming Protocol
+gdomap		538/tcp
+gdomap		538/udp
+apertus-ldp	539/tcp	   #Apertus Technologies Load Determination
+apertus-ldp	539/udp	   #Apertus Technologies Load Determination
+uucp		540/tcp	   uucpd
+uucp		540/udp	   uucpd
+uucp-rlogin	541/tcp
+uucp-rlogin	541/udp
+commerce	542/tcp
+commerce	542/udp
+klogin		543/tcp	   # Kerberos (v4/v5)
+klogin		543/udp	   # Kerberos (v4/v5)
+kshell		544/tcp	   krcmd	# Kerberos (v4/v5)
+kshell		544/udp	   krcmd	# Kerberos (v4/v5)
+appleqtcsrvr	545/tcp
+appleqtcsrvr	545/udp
+dhcpv6-client	546/tcp	   #DHCPv6 Client
+dhcpv6-client	546/udp	   #DHCPv6 Client
+dhcpv6-server	547/tcp	   #DHCPv6 Server
+dhcpv6-server	547/udp	   #DHCPv6 Server
+afpovertcp	548/tcp	   #AFP over TCP
+afpovertcp	548/udp	   #AFP over TCP
+idfp		549/tcp
+idfp		549/udp
+new-rwho	550/tcp	   new-who
+new-rwho	550/udp	   new-who
+cybercash	551/tcp
+cybercash	551/udp
+deviceshare	552/tcp
+deviceshare	552/udp
+pirp		553/tcp
+pirp		553/udp
+rtsp		554/tcp	   #Real Time Stream Control Protocol
+rtsp		554/udp	   #Real Time Stream Control Protocol
+dsf		555/tcp
+dsf		555/udp
+remotefs	556/tcp	   rfs rfs_server	# Brunhoff remote filesystem
+remotefs	556/udp	   rfs rfs_server	# Brunhoff remote filesystem
+openvms-sysipc	557/tcp
+openvms-sysipc	557/udp
+sdnskmp		558/tcp
+sdnskmp		558/udp
+teedtap		559/tcp
+teedtap		559/udp
+rmonitor	560/tcp	   rmonitord
+rmonitor	560/udp	   rmonitord
+monitor		561/tcp
+monitor		561/udp
+chshell		562/tcp	   chcmd
+chshell		562/udp	   chcmd
+nntps		563/tcp	   snntp	#nntp protocol over TLS/SSL
+nntps		563/udp	   snntp	#nntp protocol over TLS/SSL
+9pfs		564/tcp	   #plan 9 file service
+9pfs		564/udp	   #plan 9 file service
+whoami		565/tcp
+whoami		565/udp
+streettalk	566/tcp
+banyan-rpc	567/tcp
+banyan-rpc	567/udp
+ms-shuttle	568/tcp	   #Microsoft shuttle
+ms-shuttle	568/udp	   #Microsoft shuttle
+ms-rome		569/tcp	   #Microsoft rome
+ms-rome		569/udp	   #Microsoft rome
+meter		570/tcp	   #demon
+meter		570/udp	   #demon
+umeter		571/tcp	   #udemon
+umeter		571/udp	   #udemon
+sonar		572/tcp
+sonar		572/udp
+banyan-vip	573/tcp
+banyan-vip	573/udp
+ftp-agent	574/tcp	   #FTP Software Agent System
+ftp-agent	574/udp	   #FTP Software Agent System
+vemmi		575/tcp
+vemmi		575/udp
+ipcd		576/tcp
+ipcd		576/udp
+vnas		577/tcp
+vnas		577/udp
+ipdd		578/tcp
+ipdd		578/udp
+decbsrv		579/tcp
+decbsrv		579/udp
+sntp-heartbeat	580/tcp
+sntp-heartbeat	580/udp
+bdp		581/tcp	   #Bundle Discovery Protocol
+bdp		581/udp	   #Bundle Discovery Protocol
+scc-security	582/tcp
+scc-security	582/udp
+philips-vc	583/tcp	   #Philips Video-Conferencing
+philips-vc	583/udp	   #Philips Video-Conferencing
+keyserver	584/tcp
+keyserver	584/udp
+#imap4-ssl@585 never should have been allocated. See PR 46294.
+#imap4-ssl	585/tcp	   #IMAP4+SSL (use of 585 is not recommended,
+#imap4-ssl	585/udp	   #		use 993 instead)
+password-chg	586/tcp
+password-chg	586/udp
+submission	587/tcp
+submission	587/udp
+cal		588/tcp
+cal		588/udp
+eyelink		589/tcp
+eyelink		589/udp
+tns-cml		590/tcp
+tns-cml		590/udp
+http-alt	591/tcp	   #FileMaker, Inc. - HTTP Alternate (see Port 80)
+http-alt	591/udp	   #FileMaker, Inc. - HTTP Alternate (see Port 80)
+eudora-set	592/tcp
+eudora-set	592/udp
+http-rpc-epmap	593/tcp	   #HTTP RPC Ep Map
+http-rpc-epmap	593/udp	   #HTTP RPC Ep Map
+tpip		594/tcp
+tpip		594/udp
+cab-protocol	595/tcp
+cab-protocol	595/udp
+smsd		596/tcp
+smsd		596/udp
+ptcnameservice	597/tcp	   #PTC Name Service
+ptcnameservice	597/udp	   #PTC Name Service
+sco-websrvrmg3	598/tcp	   #SCO Web Server Manager 3
+sco-websrvrmg3	598/udp	   #SCO Web Server Manager 3
+acp		599/tcp	   #Aeolon Core Protocol
+acp		599/udp	   #Aeolon Core Protocol
+ipcserver	600/tcp	   #Sun IPC server
+ipcserver	600/udp	   #Sun IPC server
+urm		606/tcp	   #Cray Unified Resource Manager
+urm		606/udp	   #Cray Unified Resource Manager
+nqs		607/tcp
+nqs		607/udp
+sift-uft	608/tcp	   #Sender-Initiated/Unsolicited File Transfer
+sift-uft	608/udp	   #Sender-Initiated/Unsolicited File Transfer
+npmp-trap	609/tcp
+npmp-trap	609/udp
+npmp-local	610/tcp
+npmp-local	610/udp
+npmp-gui	611/tcp
+npmp-gui	611/udp
+sshell		614/tcp	   #SSLshell
+sshell		614/udp
+ipp		631/tcp	   #IPP (Internet Printing Protocol)
+ipp		631/udp	   #IPP (Internet Printing Protocol)
+ginad		634/tcp
+ginad		634/udp
+ldaps		636/tcp	   sldap	#ldap protocol over TLS/SSL
+ldaps		636/udp	   sldap
+aodv		654/tcp	   #Ad-Hoc On-Demand Distance Vector Routing Protocol
+aodv		654/udp	   #Ad-Hoc On-Demand Distance Vector Routing Protocol
+mdqs		666/tcp
+mdqs		666/udp
+#PROBLEMS!===============================================
+doom		666/tcp	   #doom Id Software
+doom		666/udp	   #doom Id Software
+#PROBLEMS!===============================================
+acap		674/tcp	   #Application Configuration Access Protocol
+acap		674/udp	   #Application Configuration Access Protocol
+elcsd		704/tcp	   #errlog copy/server daemon
+elcsd		704/udp	   #errlog copy/server daemon
+entrustmanager	709/tcp	   #EntrustManager
+entrustmanager	709/udp	   #EntrustManager
+netviewdm1	729/tcp	   #IBM NetView DM/6000 Server/Client
+netviewdm1	729/udp	   #IBM NetView DM/6000 Server/Client
+netviewdm2	730/tcp	   #IBM NetView DM/6000 send/tcp
+netviewdm2	730/udp	   #IBM NetView DM/6000 send/tcp
+netviewdm3	731/tcp	   #IBM NetView DM/6000 receive/tcp
+netviewdm3	731/udp	   #IBM NetView DM/6000 receive/tcp
+netgw		741/tcp
+netgw		741/udp
+netrcs		742/tcp	   #Network based Rev. Cont. Sys.
+netrcs		742/udp	   #Network based Rev. Cont. Sys.
+flexlm		744/tcp	   #Flexible License Manager
+flexlm		744/udp	   #Flexible License Manager
+fujitsu-dev	747/tcp	   #Fujitsu Device Control
+fujitsu-dev	747/udp	   #Fujitsu Device Control
+ris-cm		748/tcp	   #Russell Info Sci Calendar Manager
+ris-cm		748/udp	   #Russell Info Sci Calendar Manager
+kerberos-adm	749/tcp	   #Kerberos administration (v5)
+kerberos-adm	749/udp	   #Kerberos administration (v5)
+kerberos-iv	750/udp	   kdc		# Kerberos (v4)
+kerberos-iv	750/tcp	   kdc		# Kerberos (v4)
+#PROBLEMS!========================================================
+#rfile		750/tcp
+#loadav		750/udp
+#PROBLEMS!========================================================
+kerberos_master	751/tcp	   # Kerberos `kadmin' (v4)
+kerberos_master	751/udp	   # Kerberos `kadmin' (v4)
+#PROBLEMS!========================================================
+pump		751/tcp
+pump		751/udp
+#PROBLEMS!========================================================
+qrh		752/tcp
+qrh		752/udp
+rrh		753/tcp
+rrh		753/udp
+krb_prop	754/tcp	   krb5_prop	# kerberos/v5 server propagation
+#PROBLEMS!========================================================
+tell		754/tcp	   #send
+#PROBLEMS!========================================================
+tell		754/udp	   #send
+nlogin		758/tcp
+nlogin		758/udp
+con		759/tcp
+con		759/udp
+krbupdate	760/tcp	   kreg		# Kerberos (v4) registration
+#PROBLEMS!========================================================
+ns		760/tcp
+#PROBLEMS!========================================================
+ns		760/udp
+kpasswd		761/tcp	   kpwd		# Kerberos (v4) "passwd"
+#PROBLEMS!========================================================
+rxe		761/tcp
+#PROBLEMS!========================================================
+rxe		761/udp
+quotad		762/tcp
+quotad		762/udp
+cycleserv	763/tcp
+cycleserv	763/udp
+omserv		764/tcp
+omserv		764/udp
+webster		765/tcp
+webster		765/udp
+phonebook	767/tcp	   #phone
+phonebook	767/udp	   #phone
+vid		769/tcp
+vid		769/udp
+cadlock		770/tcp
+cadlock		770/udp
+rtip		771/tcp
+rtip		771/udp
+cycleserv2	772/tcp
+cycleserv2	772/udp
+submit		773/tcp
+notify		773/udp
+rpasswd		774/tcp
+acmaint_dbd	774/udp
+entomb		775/tcp
+acmaint_transd	775/udp
+wpages		776/tcp
+wpages		776/udp
+wpgs		780/tcp
+wpgs		780/udp
+concert		786/tcp
+concert		786/udp
+mdbs_daemon	800/tcp
+mdbs_daemon	800/udp
+device		801/tcp
+device		801/udp
+supfilesrv	871/tcp	   # for SUP
+rsync		873/tcp
+rsync		873/udp
+accessbuilder	888/tcp
+accessbuilder	888/udp
+swat		901/tcp	   # samba web configuration tool
+rndc		953/tcp	   # named's rndc control socket
+ftps-data	989/tcp	   # ftp protocol, data, over TLS/SSL
+ftps-data	989/udp
+ftps		990/tcp	   # ftp protocol, control, over TLS/SSL
+ftps		990/udp
+telnets		992/tcp	   # telnet protocol over TLS/SSL
+telnets		992/udp
+imaps		993/tcp	   # imap4 protocol over TLS/SSL
+imaps		993/udp
+ircs		994/tcp	   # irc protocol over TLS/SSL
+ircs		994/udp
+pop3s		995/tcp	   spop3	# pop3 protocol over TLS/SSL
+pop3s		995/udp	   spop3
+vsinet		996/tcp
+vsinet		996/udp
+maitrd		997/tcp
+maitrd		997/udp
+busboy		998/tcp
+puparp		998/udp
+garcon		999/tcp
+applix		999/udp	   #Applix ac
+puprouter	999/tcp
+puprouter	999/udp
+cadlock2	1000/tcp
+cadlock2	1000/udp
+#
+# REGISTERED PORT NUMBERS
+#
+blackjack	1025/tcp   #network blackjack
+blackjack	1025/udp   #network blackjack
+iad1		1030/tcp   #BBN IAD
+iad1		1030/udp   #BBN IAD
+iad2		1031/tcp   #BBN IAD
+iad2		1031/udp   #BBN IAD
+iad3		1032/tcp   #BBN IAD
+iad3		1032/udp   #BBN IAD
+nim		1058/tcp
+nim		1058/udp
+nimreg		1059/tcp
+nimreg		1059/udp
+instl_boots	1067/tcp   #Installation Bootstrap Proto. Serv.
+instl_boots	1067/udp   #Installation Bootstrap Proto. Serv.
+instl_bootc	1068/tcp   #Installation Bootstrap Proto. Cli.
+instl_bootc	1068/udp   #Installation Bootstrap Proto. Cli.
+socks		1080/tcp
+socks		1080/udp
+ansoft-lm-1	1083/tcp   #Anasoft License Manager
+ansoft-lm-1	1083/udp   #Anasoft License Manager
+ansoft-lm-2	1084/tcp   #Anasoft License Manager
+ansoft-lm-2	1084/udp   #Anasoft License Manager
+webobjects	1085/tcp   #Web Objects
+webobjects	1085/udp   #Web Objects
+kpop		1109/tcp   #Unofficial
+kpop		1109/udp   #Unofficial
+nfsd-status	1110/tcp   #Cluster status info
+nfsd-keepalive	1110/udp   #Client status info
+supfiledbg	1127/tcp   # for SUP
+nfa		1155/tcp   #Network File Access
+nfa		1155/udp   #Network File Access
+phone		1167/udp   #conference calling
+skkserv		1178/tcp   #SKK (kanji input)
+lupa		1212/tcp
+lupa		1212/udp
+nerv		1222/tcp   #SNI R&D network
+nerv		1222/udp   #SNI R&D network
+hermes		1248/tcp
+hermes		1248/udp
+healthd		1281/tcp   #healthd
+healthd		1281/udp   #healthd
+alta-ana-lm	1346/tcp   #Alta Analytics License Manager
+alta-ana-lm	1346/udp   #Alta Analytics License Manager
+bbn-mmc		1347/tcp   #multi media conferencing
+bbn-mmc		1347/udp   #multi media conferencing
+bbn-mmx		1348/tcp   #multi media conferencing
+bbn-mmx		1348/udp   #multi media conferencing
+sbook		1349/tcp   #Registration Network Protocol
+sbook		1349/udp   #Registration Network Protocol
+editbench	1350/tcp   #Registration Network Protocol
+editbench	1350/udp   #Registration Network Protocol
+equationbuilder	1351/tcp   #Digital Tool Works (MIT)
+equationbuilder	1351/udp   #Digital Tool Works (MIT)
+lotusnote	1352/tcp   #Lotus Note
+lotusnote	1352/udp   #Lotus Note
+relief		1353/tcp   #Relief Consulting
+relief		1353/udp   #Relief Consulting
+rightbrain	1354/tcp   #RightBrain Software
+rightbrain	1354/udp   #RightBrain Software
+intuitive-edge	1355/tcp   #Intuitive Edge
+intuitive-edge	1355/udp   #Intuitive Edge
+cuillamartin	1356/tcp   #CuillaMartin Company
+cuillamartin	1356/udp   #CuillaMartin Company
+pegboard	1357/tcp   #Electronic PegBoard
+pegboard	1357/udp   #Electronic PegBoard
+connlcli	1358/tcp
+connlcli	1358/udp
+ftsrv		1359/tcp
+ftsrv		1359/udp
+mimer		1360/tcp
+mimer		1360/udp
+linx		1361/tcp
+linx		1361/udp
+timeflies	1362/tcp
+timeflies	1362/udp
+ndm-requester	1363/tcp   #Network DataMover Requester
+ndm-requester	1363/udp   #Network DataMover Requester
+ndm-server	1364/tcp   #Network DataMover Server
+ndm-server	1364/udp   #Network DataMover Server
+adapt-sna	1365/tcp   #Network Software Associates
+adapt-sna	1365/udp   #Network Software Associates
+netware-csp	1366/tcp   #Novell NetWare Comm Service Platform
+netware-csp	1366/udp   #Novell NetWare Comm Service Platform
+dcs		1367/tcp
+dcs		1367/udp
+screencast	1368/tcp
+screencast	1368/udp
+gv-us		1369/tcp   #GlobalView to Unix Shell
+gv-us		1369/udp   #GlobalView to Unix Shell
+us-gv		1370/tcp   #Unix Shell to GlobalView
+us-gv		1370/udp   #Unix Shell to GlobalView
+fc-cli		1371/tcp   #Fujitsu Config Protocol
+fc-cli		1371/udp   #Fujitsu Config Protocol
+fc-ser		1372/tcp   #Fujitsu Config Protocol
+fc-ser		1372/udp   #Fujitsu Config Protocol
+chromagrafx	1373/tcp
+chromagrafx	1373/udp
+molly		1374/tcp   #EPI Software Systems
+molly		1374/udp   #EPI Software Systems
+bytex		1375/tcp
+bytex		1375/udp
+ibm-pps		1376/tcp   #IBM Person to Person Software
+ibm-pps		1376/udp   #IBM Person to Person Software
+cichlid		1377/tcp   #Cichlid License Manager
+cichlid		1377/udp   #Cichlid License Manager
+elan		1378/tcp   #Elan License Manager
+elan		1378/udp   #Elan License Manager
+dbreporter	1379/tcp   #Integrity Solutions
+dbreporter	1379/udp   #Integrity Solutions
+telesis-licman	1380/tcp   #Telesis Network License Manager
+telesis-licman	1380/udp   #Telesis Network License Manager
+apple-licman	1381/tcp   #Apple Network License Manager
+apple-licman	1381/udp   #Apple Network License Manager
+#udt_os		1382/tcp
+#udt_os		1382/udp
+gwha		1383/tcp   #GW Hannaway Network License Manager
+gwha		1383/udp   #GW Hannaway Network License Manager
+os-licman	1384/tcp   #Objective Solutions License Manager
+os-licman	1384/udp   #Objective Solutions License Manager
+atex_elmd	1385/tcp   #Atex Publishing License Manager
+atex_elmd	1385/udp   #Atex Publishing License Manager
+checksum	1386/tcp   #CheckSum License Manager
+checksum	1386/udp   #CheckSum License Manager
+cadsi-lm	1387/tcp   #Computer Aided Design Software Inc LM
+cadsi-lm	1387/udp   #Computer Aided Design Software Inc LM
+objective-dbc	1388/tcp   #Objective Solutions DataBase Cache
+objective-dbc	1388/udp   #Objective Solutions DataBase Cache
+iclpv-dm	1389/tcp   #Document Manager
+iclpv-dm	1389/udp   #Document Manager
+iclpv-sc	1390/tcp   #Storage Controller
+iclpv-sc	1390/udp   #Storage Controller
+iclpv-sas	1391/tcp   #Storage Access Server
+iclpv-sas	1391/udp   #Storage Access Server
+iclpv-pm	1392/tcp   #Print Manager
+iclpv-pm	1392/udp   #Print Manager
+iclpv-nls	1393/tcp   #Network Log Server
+iclpv-nls	1393/udp   #Network Log Server
+iclpv-nlc	1394/tcp   #Network Log Client
+iclpv-nlc	1394/udp   #Network Log Client
+iclpv-wsm	1395/tcp   #PC Workstation Manager software
+iclpv-wsm	1395/udp   #PC Workstation Manager software
+dvl-activemail	1396/tcp   #DVL Active Mail
+dvl-activemail	1396/udp   #DVL Active Mail
+audio-activmail	1397/tcp   #Audio Active Mail
+audio-activmail	1397/udp   #Audio Active Mail
+video-activmail	1398/tcp   #Video Active Mail
+video-activmail	1398/udp   #Video Active Mail
+cadkey-licman	1399/tcp   #Cadkey License Manager
+cadkey-licman	1399/udp   #Cadkey License Manager
+cadkey-tablet	1400/tcp   #Cadkey Tablet Daemon
+cadkey-tablet	1400/udp   #Cadkey Tablet Daemon
+goldleaf-licman	1401/tcp   #Goldleaf License Manager
+goldleaf-licman	1401/udp   #Goldleaf License Manager
+prm-sm-np	1402/tcp   #Prospero Resource Manager
+prm-sm-np	1402/udp   #Prospero Resource Manager
+prm-nm-np	1403/tcp   #Prospero Resource Manager
+prm-nm-np	1403/udp   #Prospero Resource Manager
+igi-lm		1404/tcp   #Infinite Graphics License Manager
+igi-lm		1404/udp   #Infinite Graphics License Manager
+ibm-res		1405/tcp   #IBM Remote Execution Starter
+ibm-res		1405/udp   #IBM Remote Execution Starter
+netlabs-lm	1406/tcp   #NetLabs License Manager
+netlabs-lm	1406/udp   #NetLabs License Manager
+dbsa-lm		1407/tcp   #DBSA License Manager
+dbsa-lm		1407/udp   #DBSA License Manager
+sophia-lm	1408/tcp   #Sophia License Manager
+sophia-lm	1408/udp   #Sophia License Manager
+here-lm		1409/tcp   #Here License Manager
+here-lm		1409/udp   #Here License Manager
+hiq		1410/tcp   #HiQ License Manager
+hiq		1410/udp   #HiQ License Manager
+af		1411/tcp   #AudioFile
+af		1411/udp   #AudioFile
+innosys		1412/tcp
+innosys		1412/udp
+innosys-acl	1413/tcp
+innosys-acl	1413/udp
+ibm-mqseries	1414/tcp   #IBM MQSeries
+ibm-mqseries	1414/udp   #IBM MQSeries
+dbstar		1415/tcp
+dbstar		1415/udp
+novell-lu6.2	1416/tcp   #Novell LU6.2
+novell-lu6.2	1416/udp   #Novell LU6.2
+timbuktu-srv1	1417/tcp   #Timbuktu Service 1 Port
+timbuktu-srv1	1417/udp   #Timbuktu Service 1 Port
+timbuktu-srv2	1418/tcp   #Timbuktu Service 2 Port
+timbuktu-srv2	1418/udp   #Timbuktu Service 2 Port
+timbuktu-srv3	1419/tcp   #Timbuktu Service 3 Port
+timbuktu-srv3	1419/udp   #Timbuktu Service 3 Port
+timbuktu-srv4	1420/tcp   #Timbuktu Service 4 Port
+timbuktu-srv4	1420/udp   #Timbuktu Service 4 Port
+gandalf-lm	1421/tcp   #Gandalf License Manager
+gandalf-lm	1421/udp   #Gandalf License Manager
+autodesk-lm	1422/tcp   #Autodesk License Manager
+autodesk-lm	1422/udp   #Autodesk License Manager
+essbase		1423/tcp   #Essbase Arbor Software
+essbase		1423/udp   #Essbase Arbor Software
+hybrid		1424/tcp   #Hybrid Encryption Protocol
+hybrid		1424/udp   #Hybrid Encryption Protocol
+zion-lm		1425/tcp   #Zion Software License Manager
+zion-lm		1425/udp   #Zion Software License Manager
+sas-1		1426/tcp   #Satellite-data Acquisition System 1
+sas-1		1426/udp   #Satellite-data Acquisition System 1
+mloadd		1427/tcp   #mloadd monitoring tool
+mloadd		1427/udp   #mloadd monitoring tool
+informatik-lm	1428/tcp   #Informatik License Manager
+informatik-lm	1428/udp   #Informatik License Manager
+nms		1429/tcp   #Hypercom NMS
+nms		1429/udp   #Hypercom NMS
+tpdu		1430/tcp   #Hypercom TPDU
+tpdu		1430/udp   #Hypercom TPDU
+rgtp		1431/tcp   #Reverse Gossip Transport
+rgtp		1431/udp   #Reverse Gossip Transport
+blueberry-lm	1432/tcp   #Blueberry Software License Manager
+blueberry-lm	1432/udp   #Blueberry Software License Manager
+ms-sql-s	1433/tcp   #Microsoft-SQL-Server
+ms-sql-s	1433/udp   #Microsoft-SQL-Server
+ms-sql-m	1434/tcp   #Microsoft-SQL-Monitor
+ms-sql-m	1434/udp   #Microsoft-SQL-Monitor
+ibm-cics	1435/tcp
+ibm-cics	1435/udp
+sas-2		1436/tcp   #Satellite-data Acquisition System 2
+sas-2		1436/udp   #Satellite-data Acquisition System 2
+tabula		1437/tcp
+tabula		1437/udp
+eicon-server	1438/tcp   #Eicon Security Agent/Server
+eicon-server	1438/udp   #Eicon Security Agent/Server
+eicon-x25	1439/tcp   #Eicon X25/SNA Gateway
+eicon-x25	1439/udp   #Eicon X25/SNA Gateway
+eicon-slp	1440/tcp   #Eicon Service Location Protocol
+eicon-slp	1440/udp   #Eicon Service Location Protocol
+cadis-1		1441/tcp   #Cadis License Management
+cadis-1		1441/udp   #Cadis License Management
+cadis-2		1442/tcp   #Cadis License Management
+cadis-2		1442/udp   #Cadis License Management
+ies-lm		1443/tcp   #Integrated Engineering Software
+ies-lm		1443/udp   #Integrated Engineering Software
+marcam-lm	1444/tcp   #Marcam  License Management
+marcam-lm	1444/udp   #Marcam  License Management
+proxima-lm	1445/tcp   #Proxima License Manager
+proxima-lm	1445/udp   #Proxima License Manager
+ora-lm		1446/tcp   #Optical Research Associates License Manager
+ora-lm		1446/udp   #Optical Research Associates License Manager
+apri-lm		1447/tcp   #Applied Parallel Research LM
+apri-lm		1447/udp   #Applied Parallel Research LM
+oc-lm		1448/tcp   #OpenConnect License Manager
+oc-lm		1448/udp   #OpenConnect License Manager
+peport		1449/tcp
+peport		1449/udp
+dwf		1450/tcp   #Tandem Distributed Workbench Facility
+dwf		1450/udp   #Tandem Distributed Workbench Facility
+infoman		1451/tcp   #IBM Information Management
+infoman		1451/udp   #IBM Information Management
+gtegsc-lm	1452/tcp   #GTE Government Systems License Man
+gtegsc-lm	1452/udp   #GTE Government Systems License Man
+genie-lm	1453/tcp   #Genie License Manager
+genie-lm	1453/udp   #Genie License Manager
+interhdl_elmd	1454/tcp   #interHDL License Manager
+interhdl_elmd	1454/udp   #interHDL License Manager
+esl-lm		1455/tcp   #ESL License Manager
+esl-lm		1455/udp   #ESL License Manager
+dca		1456/tcp
+dca		1456/udp
+valisys-lm	1457/tcp   #Valisys License Manager
+valisys-lm	1457/udp   #Valisys License Manager
+nrcabq-lm	1458/tcp   #Nichols Research Corp.
+nrcabq-lm	1458/udp   #Nichols Research Corp.
+proshare1	1459/tcp   #Proshare Notebook Application
+proshare1	1459/udp   #Proshare Notebook Application
+proshare2	1460/tcp   #Proshare Notebook Application
+proshare2	1460/udp   #Proshare Notebook Application
+ibm_wrless_lan	1461/tcp   #IBM Wireless LAN
+ibm_wrless_lan	1461/udp   #IBM Wireless LAN
+world-lm	1462/tcp   #World License Manager
+world-lm	1462/udp   #World License Manager
+nucleus		1463/tcp
+nucleus		1463/udp
+msl_lmd		1464/tcp   #MSL License Manager
+msl_lmd		1464/udp   #MSL License Manager
+pipes		1465/tcp   #Pipes Platform
+pipes		1465/udp   #Pipes Platform  mfarlin@peerlogic.com
+oceansoft-lm	1466/tcp   #Ocean Software License Manager
+oceansoft-lm	1466/udp   #Ocean Software License Manager
+csdmbase	1467/tcp
+csdmbase	1467/udp
+csdm		1468/tcp
+csdm		1468/udp
+aal-lm		1469/tcp   #Active Analysis Limited License Manager
+aal-lm		1469/udp   #Active Analysis Limited License Manager
+uaiact		1470/tcp   #Universal Analytics
+uaiact		1470/udp   #Universal Analytics
+csdmbase	1471/tcp
+csdmbase	1471/udp
+csdm		1472/tcp
+csdm		1472/udp
+openmath	1473/tcp
+openmath	1473/udp
+telefinder	1474/tcp
+telefinder	1474/udp
+taligent-lm	1475/tcp   #Taligent License Manager
+taligent-lm	1475/udp   #Taligent License Manager
+clvm-cfg	1476/tcp
+clvm-cfg	1476/udp
+ms-sna-server	1477/tcp
+ms-sna-server	1477/udp
+ms-sna-base	1478/tcp
+ms-sna-base	1478/udp
+dberegister	1479/tcp
+dberegister	1479/udp
+pacerforum	1480/tcp
+pacerforum	1480/udp
+airs		1481/tcp
+airs		1481/udp
+miteksys-lm	1482/tcp   #Miteksys License Manager
+miteksys-lm	1482/udp   #Miteksys License Manager
+afs		1483/tcp   #AFS License Manager
+afs		1483/udp   #AFS License Manager
+confluent	1484/tcp   #Confluent License Manager
+confluent	1484/udp   #Confluent License Manager
+lansource	1485/tcp
+lansource	1485/udp
+nms_topo_serv	1486/tcp
+nms_topo_serv	1486/udp
+localinfosrvr	1487/tcp
+localinfosrvr	1487/udp
+docstor		1488/tcp
+docstor		1488/udp
+dmdocbroker	1489/tcp
+dmdocbroker	1489/udp
+insitu-conf	1490/tcp
+insitu-conf	1490/udp
+anynetgateway	1491/tcp
+anynetgateway	1491/udp
+stone-design-1	1492/tcp
+stone-design-1	1492/udp
+netmap_lm	1493/tcp
+netmap_lm	1493/udp
+ica		1494/tcp
+ica		1494/udp
+cvc		1495/tcp
+cvc		1495/udp
+liberty-lm	1496/tcp
+liberty-lm	1496/udp
+rfx-lm		1497/tcp
+rfx-lm		1497/udp
+watcom-sql	1498/tcp
+watcom-sql	1498/udp
+fhc		1499/tcp   #Federico Heinz Consultora
+fhc		1499/udp   #Federico Heinz Consultora
+vlsi-lm		1500/tcp   #VLSI License Manager
+vlsi-lm		1500/udp   #VLSI License Manager
+sas-3		1501/tcp   #Satellite-data Acquisition System 3
+sas-3		1501/udp   #Satellite-data Acquisition System 3
+shivadiscovery	1502/tcp   #Shiva
+shivadiscovery	1502/udp   #Shiva
+imtc-mcs	1503/tcp   #Databeam
+imtc-mcs	1503/udp   #Databeam
+evb-elm		1504/tcp   #EVB Software Engineering License Manager
+evb-elm		1504/udp   #EVB Software Engineering License Manager
+funkproxy	1505/tcp   #Funk Software, Inc.
+funkproxy	1505/udp   #Funk Software, Inc.
+utcd		1506/tcp   #Universal Time daemon (utcd)
+utcd		1506/udp   #Universal Time daemon (utcd)
+symplex		1507/tcp
+symplex		1507/udp
+diagmond	1508/tcp
+diagmond	1508/udp
+robcad-lm	1509/tcp   #Robcad, Ltd. License Manager
+robcad-lm	1509/udp   #Robcad, Ltd. License Manager
+mvx-lm		1510/tcp   #Midland Valley Exploration Ltd. Lic. Man.
+mvx-lm		1510/udp   #Midland Valley Exploration Ltd. Lic. Man.
+3l-l1		1511/tcp
+3l-l1		1511/udp
+wins		1512/tcp   #Microsoft's Windows Internet Name Service
+wins		1512/udp   #Microsoft's Windows Internet Name Service
+fujitsu-dtc	1513/tcp   #Fujitsu Systems Business of America, Inc
+fujitsu-dtc	1513/udp   #Fujitsu Systems Business of America, Inc
+fujitsu-dtcns	1514/tcp   #Fujitsu Systems Business of America, Inc
+fujitsu-dtcns	1514/udp   #Fujitsu Systems Business of America, Inc
+ifor-protocol	1515/tcp
+ifor-protocol	1515/udp
+vpad		1516/tcp   #Virtual Places Audio data
+vpad		1516/udp   #Virtual Places Audio data
+vpac		1517/tcp   #Virtual Places Audio control
+vpac		1517/udp   #Virtual Places Audio control
+vpvd		1518/tcp   #Virtual Places Video data
+vpvd		1518/udp   #Virtual Places Video data
+vpvc		1519/tcp   #Virtual Places Video control
+vpvc		1519/udp   #Virtual Places Video control
+atm-zip-office	1520/tcp   #atm zip office
+atm-zip-office	1520/udp   #atm zip office
+ncube-lm	1521/tcp   #nCube License Manager
+ncube-lm	1521/udp   #nCube License Manager
+rna-lm		1522/tcp   #Ricardo North America License Manager
+rna-lm		1522/udp   #Ricardo North America License Manager
+cichild-lm	1523/tcp
+cichild-lm	1523/udp
+ingreslock	1524/tcp   #ingres
+ingreslock	1524/udp   #ingres
+prospero-np	1525/tcp   #Prospero Directory Service non-priv
+prospero-np	1525/udp   #Prospero Directory Service non-priv
+#PROBLEMS!========================================================
+orasrv		1525/tcp   #oracle
+orasrv		1525/udp   #oracle
+#PROBLEMS!========================================================
+pdap-np		1526/tcp   #Prospero Data Access Prot non-priv
+pdap-np		1526/udp   #Prospero Data Access Prot non-priv
+tlisrv		1527/tcp   #oracle
+tlisrv		1527/udp   #oracle
+mciautoreg	1528/tcp
+mciautoreg	1528/udp
+support		1529/tcp   prmsd gnatsd	# cygnus bug tracker
+coauthor	1529/tcp   #oracle
+coauthor	1529/udp   #oracle
+rap-service	1530/tcp
+rap-service	1530/udp
+rap-listen	1531/tcp
+rap-listen	1531/udp
+miroconnect	1532/tcp
+miroconnect	1532/udp
+virtual-places	1533/tcp   #Virtual Places Software
+virtual-places	1533/udp   #Virtual Places Software
+micromuse-lm	1534/tcp
+micromuse-lm	1534/udp
+ampr-info	1535/tcp
+ampr-info	1535/udp
+ampr-inter	1536/tcp
+ampr-inter	1536/udp
+sdsc-lm		1537/tcp
+sdsc-lm		1537/udp
+3ds-lm		1538/tcp
+3ds-lm		1538/udp
+intellistor-lm	1539/tcp   #Intellistor License Manager
+intellistor-lm	1539/udp   #Intellistor License Manager
+rds		1540/tcp
+rds		1540/udp
+rds2		1541/tcp
+rds2		1541/udp
+gridgen-elmd	1542/tcp
+gridgen-elmd	1542/udp
+simba-cs	1543/tcp
+simba-cs	1543/udp
+aspeclmd	1544/tcp
+aspeclmd	1544/udp
+vistium-share	1545/tcp
+vistium-share	1545/udp
+abbaccuray	1546/tcp
+abbaccuray	1546/udp
+laplink		1547/tcp
+laplink		1547/udp
+axon-lm		1548/tcp   #Axon License Manager
+axon-lm		1548/udp   #Axon License Manager
+shivahose	1549/tcp   #Shiva Hose
+shivasound	1549/udp   #Shiva Sound
+3m-image-lm	1550/tcp   #Image Storage license manager 3M Company
+3m-image-lm	1550/udp   #Image Storage license manager 3M Company
+hecmtl-db	1551/tcp
+hecmtl-db	1551/udp
+pciarray	1552/tcp
+pciarray	1552/udp
+issd		1600/tcp
+issd		1600/udp
+# IMPORTANT NOTE: Ports 1645/1646 are the traditional radius ports used by
+# many vendors without obtaining official IANA assignment.  The official
+# assignment is now ports 1812/1813 and users are encouraged to migrate
+# when possible to these new ports.
+#radius		1645/udp   #RADIUS authentication protocol (old)
+#radacct	1646/udp   #RADIUS accounting protocol (old)
+nkd		1650/tcp
+nkd		1650/udp
+shiva_confsrvr	1651/tcp
+shiva_confsrvr	1651/udp
+xnmp		1652/tcp
+xnmp		1652/udp
+netview-aix-1	1661/tcp
+netview-aix-1	1661/udp
+netview-aix-2	1662/tcp
+netview-aix-2	1662/udp
+netview-aix-3	1663/tcp
+netview-aix-3	1663/udp
+netview-aix-4	1664/tcp
+netview-aix-4	1664/udp
+netview-aix-5	1665/tcp
+netview-aix-5	1665/udp
+netview-aix-6	1666/tcp
+netview-aix-6	1666/udp
+netview-aix-7	1667/tcp
+netview-aix-7	1667/udp
+netview-aix-8	1668/tcp
+netview-aix-8	1668/udp
+netview-aix-9	1669/tcp
+netview-aix-9	1669/udp
+netview-aix-10	1670/tcp
+netview-aix-10	1670/udp
+netview-aix-11	1671/tcp
+netview-aix-11	1671/udp
+netview-aix-12	1672/tcp
+netview-aix-12	1672/udp
+l2f		1701/tcp   #l2f
+l2f		1701/udp   #l2f
+l2tp		1701/tcp   #Layer 2 Tunnelling Protocol
+l2tp		1701/udp   #Layer 2 Tunnelling Protocol
+pptp		1723/tcp   #Point-to-point tunnelling protocol
+# IMPORTANT NOTE: See comments for ports 1645/1646 when using older equipment
+radius		1812/udp   #RADIUS authentication protocol (IANA sanctioned)
+radacct		1813/udp   #RADIUS accounting protocol (IANA sanctioned)
+licensedaemon	1986/tcp   #cisco license management
+licensedaemon	1986/udp   #cisco license management
+tr-rsrb-p1	1987/tcp   #cisco RSRB Priority 1 port
+tr-rsrb-p1	1987/udp   #cisco RSRB Priority 1 port
+tr-rsrb-p2	1988/tcp   #cisco RSRB Priority 2 port
+tr-rsrb-p2	1988/udp   #cisco RSRB Priority 2 port
+tr-rsrb-p3	1989/tcp   #cisco RSRB Priority 3 port
+tr-rsrb-p3	1989/udp   #cisco RSRB Priority 3 port
+#PROBLEMS!===================================================
+mshnet		1989/tcp   #MHSnet system
+mshnet		1989/udp   #MHSnet system
+#PROBLEMS!===================================================
+stun-p1		1990/tcp   #cisco STUN Priority 1 port
+stun-p1		1990/udp   #cisco STUN Priority 1 port
+stun-p2		1991/tcp   #cisco STUN Priority 2 port
+stun-p2		1991/udp   #cisco STUN Priority 2 port
+stun-p3		1992/tcp   #cisco STUN Priority 3 port
+stun-p3		1992/udp   #cisco STUN Priority 3 port
+#PROBLEMS!===================================================
+ipsendmsg	1992/tcp
+ipsendmsg	1992/udp
+#PROBLEMS!===================================================
+snmp-tcp-port	1993/tcp   #cisco SNMP TCP port
+snmp-tcp-port	1993/udp   #cisco SNMP TCP port
+stun-port	1994/tcp   #cisco serial tunnel port
+stun-port	1994/udp   #cisco serial tunnel port
+perf-port	1995/tcp   #cisco perf port
+perf-port	1995/udp   #cisco perf port
+tr-rsrb-port	1996/tcp   #cisco Remote SRB port
+tr-rsrb-port	1996/udp   #cisco Remote SRB port
+gdp-port	1997/tcp   #cisco Gateway Discovery Protocol
+gdp-port	1997/udp   #cisco Gateway Discovery Protocol
+x25-svc-port	1998/tcp   #cisco X.25 service (XOT)
+x25-svc-port	1998/udp   #cisco X.25 service (XOT)
+tcp-id-port	1999/tcp   #cisco identification port
+tcp-id-port	1999/udp   #cisco identification port
+callbook	2000/tcp
+callbook	2000/udp
+dc		2001/tcp
+wizard		2001/udp   #curry
+globe		2002/tcp
+globe		2002/udp
+cfingerd	2003/tcp   #GNU finger
+mailbox		2004/tcp
+emce		2004/udp   #CCWS mm conf
+berknet		2005/tcp
+oracle		2005/udp
+invokator	2006/tcp
+raid-cc		2006/udp   #raid
+dectalk		2007/tcp
+raid-am		2007/udp
+conf		2008/tcp
+terminaldb	2008/udp
+news		2009/tcp
+whosockami	2009/udp
+search		2010/tcp
+pipe_server	2010/udp
+raid-cc		2011/tcp   #raid
+servserv	2011/udp
+ttyinfo		2012/tcp
+raid-ac		2012/udp
+raid-am		2013/tcp
+raid-cd		2013/udp
+troff		2014/tcp
+raid-sf		2014/udp
+cypress		2015/tcp
+raid-cs		2015/udp
+bootserver	2016/tcp
+bootserver	2016/udp
+cypress-stat	2017/tcp
+bootclient	2017/udp
+terminaldb	2018/tcp
+rellpack	2018/udp
+whosockami	2019/tcp
+about		2019/udp
+xinupageserver	2020/tcp
+xinupageserver	2020/udp
+servexec	2021/tcp
+xinuexpansion1	2021/udp
+down		2022/tcp
+xinuexpansion2	2022/udp
+xinuexpansion3	2023/tcp
+xinuexpansion3	2023/udp
+xinuexpansion4	2024/tcp
+xinuexpansion4	2024/udp
+ellpack		2025/tcp
+xribs		2025/udp
+scrabble	2026/tcp
+scrabble	2026/udp
+shadowserver	2027/tcp
+shadowserver	2027/udp
+submitserver	2028/tcp
+submitserver	2028/udp
+device2		2030/tcp
+device2		2030/udp
+blackboard	2032/tcp
+blackboard	2032/udp
+glogger		2033/tcp
+glogger		2033/udp
+scoremgr	2034/tcp
+scoremgr	2034/udp
+imsldoc		2035/tcp
+imsldoc		2035/udp
+objectmanager	2038/tcp
+objectmanager	2038/udp
+lam		2040/tcp
+lam		2040/udp
+interbase	2041/tcp
+interbase	2041/udp
+isis		2042/tcp
+isis		2042/udp
+isis-bcast	2043/tcp
+isis-bcast	2043/udp
+rimsl		2044/tcp
+rimsl		2044/udp
+cdfunc		2045/tcp
+cdfunc		2045/udp
+sdfunc		2046/tcp
+sdfunc		2046/udp
+#dls		2047/tcp
+#dls		2047/udp
+dls-monitor	2048/tcp
+dls-monitor	2048/udp
+nfsd		2049/tcp   nfs		# NFS server daemon
+nfsd		2049/udp   nfs		# NFS server daemon
+#PROBLEMS!=============================================================
+#shilp		2049/tcp
+#shilp		2049/udp
+#PROBLEMS!=============================================================
+dlsrpn		2065/tcp   #Data Link Switch Read Port Number
+dlsrpn		2065/udp   #Data Link Switch Read Port Number
+dlswpn		2067/tcp   #Data Link Switch Write Port Number
+dlswpn		2067/udp   #Data Link Switch Write Port Number
+zephyr-clt	2103/udp   #Zephyr serv-hm connection
+zephyr-hm	2104/udp   #Zephyr hostmanager
+#PROBLEMS!=============================================================
+#zephyr-hm-srv	2105/udp   #Zephyr hm-serv connection
+#PROBLEMS!=============================================================
+eklogin		2105/tcp   #Kerberos (v4) encrypted rlogin
+eklogin		2105/udp   #Kerberos (v4) encrypted rlogin
+ekshell		2106/tcp   #Kerberos (v4) encrypted rshell
+ekshell		2106/udp   #Kerberos (v4) encrypted rshell
+rkinit		2108/tcp   #Kerberos (v4) remote initialization
+rkinit		2108/udp   #Kerberos (v4) remote initialization
+ats		2201/tcp   #Advanced Training System Program
+ats		2201/udp   #Advanced Training System Program
+ivs-video	2232/tcp   #IVS Video default
+ivs-video	2232/udp   #IVS Video default
+ivsd		2241/tcp   #IVS Daemon
+ivsd		2241/udp   #IVS Daemon
+pehelp		2307/tcp
+pehelp		2307/udp
+cvspserver	2401/tcp   #CVS network server
+cvspserver	2401/udp   #CVS network server
+venus		2430/tcp   #venus
+venus		2430/udp   #venus
+venus-se	2431/tcp   #venus-se
+venus-se	2431/udp   #venus-se
+codasrv		2432/tcp   #codasrv
+codasrv		2432/udp   #codasrv
+codasrv-se	2433/tcp   #codasrv-se
+codasrv-se	2433/udp   #codasrv-se
+rtsserv		2500/tcp   #Resource Tracking system server
+rtsserv		2500/udp   #Resource Tracking system server
+rtsclient	2501/tcp   #Resource Tracking system client
+rtsclient	2501/udp   #Resource Tracking system client
+hp-3000-telnet	2564/tcp   #HP 3000 NS/VT block mode telnet
+zebrasrv	2600/tcp   #zebra service
+zebra		2601/tcp   #zebra vty
+ripd		2602/tcp   #RIPd vty
+ripngd		2603/tcp   #RIPngd vty
+ospfd		2604/tcp   #OSPFd vty
+bgpd		2605/tcp   #BGPd vty
+ospf6d		2606/tcp   #OSPF6d vty
+dict		2628/tcp   #RFC 2229
+dict		2628/udp   #RFC 2229
+listen		2766/tcp   #System V listener port
+www-dev		2784/tcp   #world wide web - development
+www-dev		2784/udp   #world wide web - development
+eppc		3031/tcp   #Remote AppleEvents/PPC Toolbox
+eppc		3031/udp   #Remote AppleEvents/PPC Toolbox
+NSWS		3049/tcp
+NSWS		3049/udp
+gds_db		3050/tcp   #InterBase Database Remote Protocol
+gds_db		3050/udp   #InterBase Database Remote Protocol
+sj3		3086/tcp   #SJ3 (kanji input)
+vmodem		3141/tcp
+vmodem		3141/udp
+ccmail		3264/tcp   #cc:mail/lotus
+ccmail		3264/udp   #cc:mail/lotus
+dec-notes	3333/tcp   #DEC Notes
+dec-notes	3333/udp   #DEC Notes
+rdp		3389/tcp   #Microsoft Remote Desktop Protocol
+bmap		3421/tcp   #Bull Apprise portmapper
+bmap		3421/udp   #Bull Apprise portmapper
+prsvp		3455/tcp   #RSVP Port
+prsvp		3455/udp   rsvp-encap	#RSVP Port
+vat		3456/tcp   #VAT default data
+vat		3456/udp   #VAT default data
+vat-control	3457/tcp   #VAT default control
+vat-control	3457/udp   #VAT default control
+nut		3493/tcp   #Network UPS Tools
+nut		3493/udp   #Network UPS Tools
+tsp		3653/tcp   #Tunnel Setup Protocol
+tsp		3653/udp   #Tunnel Setup Protocol
+svn		3690/tcp   #Subversion
+svn		3690/udp   #Subversion
+udt_os		3900/tcp   #Unidata UDT OS
+udt_os		3900/udp   #Unidata UDT OS
+mapper-nodemgr	3984/tcp   #MAPPER network node manager
+mapper-nodemgr	3984/udp   #MAPPER network node manager
+mapper-mapethd	3985/tcp   #MAPPER TCP/IP server
+mapper-mapethd	3985/udp   #MAPPER TCP/IP server
+mapper-ws_ethd	3986/tcp   #MAPPER workstation server
+mapper-ws_ethd	3986/udp   #MAPPER workstation server
+netcheque	4008/tcp   #NetCheque accounting
+netcheque	4008/udp   #NetCheque accounting
+lockd		4045/udp   # NFS lock daemon/manager
+lockd		4045/tcp
+nuts_dem	4132/tcp   #NUTS Daemon
+nuts_dem	4132/udp   #NUTS Daemon
+nuts_bootp	4133/tcp   #NUTS Bootp Server
+nuts_bootp	4133/udp   #NUTS Bootp Server
+rwhois		4321/tcp   #Remote Who Is
+rwhois		4321/udp   #Remote Who Is
+unicall		4343/tcp
+unicall		4343/udp
+krb524		4444/tcp
+krb524		4444/udp
+# PROBLEM krb524 assigned the port,
+# PROBLEM nv used it without an assignment
+nv-video	4444/tcp   #NV Video default
+nv-video	4444/udp   #NV Video default
+sae-urn		4500/tcp
+sae-urn		4500/udp
+fax		4557/tcp   #FAX transmission service
+hylafax		4559/tcp   #HylaFAX client-server protocol
+rfa		4672/tcp   #remote file access server
+rfa		4672/udp   #remote file access server
+commplex-main	5000/tcp
+commplex-main	5000/udp
+commplex-link	5001/tcp
+commplex-link	5001/udp
+rfe		5002/tcp   #radio free ethernet
+rfe		5002/udp   #radio free ethernet
+telelpathstart	5010/tcp
+telelpathstart	5010/udp
+telelpathattack	5011/tcp
+telelpathattack	5011/udp
+mmcc		5050/tcp   #multimedia conference control tool
+mmcc		5050/udp   #multimedia conference control tool
+rmonitor_secure	5145/tcp
+rmonitor_secure	5145/udp
+aol		5190/tcp   #America-Online
+aol		5190/udp   #America-Online
+aol-1		5191/tcp   #AmericaOnline1
+aol-1		5191/udp   #AmericaOnline1
+aol-2		5192/tcp   #AmericaOnline2
+aol-2		5192/udp   #AmericaOnline2
+aol-3		5193/tcp   #AmericaOnline3
+aol-3		5193/udp   #AmericaOnline3
+jabber-client	5222/tcp   #Jabber Client Connection
+jabber-client	5222/udp   #Jabber Client Connection
+padl2sim	5236/tcp
+padl2sim	5236/udp
+jabber-server	5269/tcp   #Jabber Server Connection
+jabber-server	5269/udp   #Jabber Server Connection
+hacl-hb		5300/tcp   # HA cluster heartbeat
+hacl-hb		5300/udp   # HA cluster heartbeat
+hacl-gs		5301/tcp   # HA cluster general services
+hacl-gs		5301/udp   # HA cluster general services
+hacl-cfg	5302/tcp   # HA cluster configuration
+hacl-cfg	5302/udp   # HA cluster configuration
+hacl-probe	5303/tcp   # HA cluster probing
+hacl-probe	5303/udp   # HA cluster probing
+hacl-local	5304/tcp
+hacl-local	5304/udp
+hacl-test	5305/tcp
+hacl-test	5305/udp
+cfengine	5308/tcp
+cfengine	5308/udp
+mdns		5353/tcp   #Multicast DNS
+mdns		5353/udp   #Multicast DNS
+postgresql	5432/tcp   #PostgreSQL Database
+postgresql	5432/udp   #PostgreSQL Database
+rplay		5555/udp
+canna		5680/tcp   #Canna (Japanese Input)
+proshareaudio	5713/tcp   #proshare conf audio
+proshareaudio	5713/udp   #proshare conf audio
+prosharevideo	5714/tcp   #proshare conf video
+prosharevideo	5714/udp   #proshare conf video
+prosharedata	5715/tcp   #proshare conf data
+prosharedata	5715/udp   #proshare conf data
+prosharerequest	5716/tcp   #proshare conf request
+prosharerequest	5716/udp   #proshare conf request
+prosharenotify	5717/tcp   #proshare conf notify
+prosharenotify	5717/udp   #proshare conf notify
+cvsup		5999/tcp   #CVSup file transfer/John Polstra/FreeBSD
+x11		6000/tcp   #6000-6063 are assigned to X Window System
+x11		6000/udp
+x11-ssh		6010/tcp   #Unofficial name, for convenience
+x11-ssh		6010/udp
+softcm		6110/tcp   #HP SoftBench CM
+softcm		6110/udp   #HP SoftBench CM
+spc		6111/tcp   #HP SoftBench Sub-Process Control
+spc		6111/udp   #HP SoftBench Sub-Process Control
+meta-corp	6141/tcp   #Meta Corporation License Manager
+meta-corp	6141/udp   #Meta Corporation License Manager
+aspentec-lm	6142/tcp   #Aspen Technology License Manager
+aspentec-lm	6142/udp   #Aspen Technology License Manager
+watershed-lm	6143/tcp   #Watershed License Manager
+watershed-lm	6143/udp   #Watershed License Manager
+statsci1-lm	6144/tcp   #StatSci License Manager - 1
+statsci1-lm	6144/udp   #StatSci License Manager - 1
+statsci2-lm	6145/tcp   #StatSci License Manager - 2
+statsci2-lm	6145/udp   #StatSci License Manager - 2
+lonewolf-lm	6146/tcp   #Lone Wolf Systems License Manager
+lonewolf-lm	6146/udp   #Lone Wolf Systems License Manager
+montage-lm	6147/tcp   #Montage License Manager
+montage-lm	6147/udp   #Montage License Manager
+ricardo-lm	6148/tcp   #Ricardo North America License Manager
+ricardo-lm	6148/udp   #Ricardo North America License Manager
+xdsxdm		6558/tcp
+xdsxdm		6558/udp
+ircd		6667/tcp   #Internet Relay Chat (unoffical)
+acmsoda		6969/tcp
+acmsoda		6969/udp
+afs3-fileserver	7000/tcp   #file server itself
+afs3-fileserver	7000/udp   #file server itself
+afs3-callback	7001/tcp   #callbacks to cache managers
+afs3-callback	7001/udp   #callbacks to cache managers
+afs3-prserver	7002/tcp   #users & groups database
+afs3-prserver	7002/udp   #users & groups database
+afs3-vlserver	7003/tcp   #volume location database
+afs3-vlserver	7003/udp   #volume location database
+afs3-kaserver	7004/tcp   #AFS/Kerberos authentication service
+afs3-kaserver	7004/udp   #AFS/Kerberos authentication service
+afs3-volser	7005/tcp   #volume management server
+afs3-volser	7005/udp   #volume management server
+afs3-errors	7006/tcp   #error interpretation service
+afs3-errors	7006/udp   #error interpretation service
+afs3-bos	7007/tcp   #basic overseer process
+afs3-bos	7007/udp   #basic overseer process
+afs3-update	7008/tcp   #server-to-server updater
+afs3-update	7008/udp   #server-to-server updater
+afs3-rmtsys	7009/tcp   #remote cache manager service
+afs3-rmtsys	7009/udp   #remote cache manager service
+afs3-resserver	7010/tcp   #MR-AFS residence server
+afs3-resserver	7010/udp   #MR-AFS residence server
+ups-onlinet	7010/tcp   #onlinet uninterruptable power supplies
+ups-onlinet	7010/udp   #onlinet uninterruptable power supplies
+afs3-remio	7011/tcp   #MR-AFS remote IO server
+afs3-remio	7011/udp   #MR-AFS remote IO server
+font-service	7100/tcp   #X Font Service
+font-service	7100/udp   #X Font Service
+fodms		7200/tcp   #FODMS FLIP
+fodms		7200/udp   #FODMS FLIP
+dlip		7201/tcp
+dlip		7201/udp
+ftp-proxy	8021/tcp   # FTP proxy
+natd		8668/divert # Network Address Translation
+jetdirect	9100/tcp   #HP JetDirect card
+git		9418/tcp   # Git Version Control System
+man		9535/tcp
+man		9535/udp
+sd		9876/tcp   #Session Director
+sd		9876/udp   #Session Director
+amanda		10080/udp  #Dump server control
+amandaidx	10082/tcp  #Amanda indexing
+amidxtape	10083/tcp  #Amanda tape indexing
+isode-dua	17007/tcp
+isode-dua	17007/udp
+biimenu		18000/tcp  #Beckman Instruments, Inc.
+biimenu		18000/udp  #Beckman Instruments, Inc.
+wnn4		22273/tcp  wnn6		#Wnn4 (Japanese input)
+wnn4_Cn		22289/tcp  wnn6_Cn	#Wnn4 (Chinese input)
+wnn4_Kr		22305/tcp  wnn6_Kr	#Wnn4 (Korean input)
+wnn4_Tw		22321/tcp  wnn6_Tw	#Wnn4 (Taiwanse input)
+wnn6_DS		26208/tcp  #Wnn6 (Dserver)
+dbbrowse	47557/tcp  #Databeam Corporation
+dbbrowse	47557/udp  #Databeam Corporation
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/shadow b/target/device/Atmel/atngw100-base/target_skeleton/etc/shadow
new file mode 100644
index 000000000..4a416022c
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/shadow
@@ -0,0 +1,17 @@
+root:$1$OJeedGT3$uG0eWkNhkeq0WO6Wldk1Y.:13200:0:99999:7:::
+daemon:!:13200:0:99999:7:::
+bin:!:13200:0:99999:7:::
+sys:!:13200:0:99999:7:::
+sync:!:13200:0:99999:7:::
+mail:!:13200:0:99999:7:::
+proxy:!:13200:0:99999:7:::
+www-data:!:13200:0:99999:7:::
+backup:!:13200:0:99999:7:::
+operator:!:13200:0:99999:7:::
+haldaemon:!:13200:0:99999:7:::
+dbus:!:13200:0:99999:7:::
+ftp:!:13200:0:99999:7:::
+dnsmasq:!:13200:0:99999:7:::
+sshd:!:13200:0:99999:7:::
+nobody:!:13200:0:99999:7:::
+default:!:13200:0:99999:7:::
diff --git a/target/device/Atmel/atngw100-base/target_skeleton/etc/shells b/target/device/Atmel/atngw100-base/target_skeleton/etc/shells
new file mode 100644
index 000000000..6ee110ced
--- /dev/null
+++ b/target/device/Atmel/atngw100-base/target_skeleton/etc/shells
@@ -0,0 +1,8 @@
+# /etc/shells: valid login shells
+/bin/ash
+/bin/sh
+/bin/zsh
+/bin/bash
+/usr/bin/zsh
+/usr/bin/bash
+/usr/bin/screen