Remove all Config.in/Makefile.in files in target/device

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

14 files changed, 0 insertions, 606 deletions

diff --git a/target/device/Atmel/AT91_Config.in b/target/device/Atmel/AT91_Config.in
deleted file mode 100644
index 77b01bf87..000000000
--- a/target/device/Atmel/AT91_Config.in
+++ /dev/null
@@ -1,335 +0,0 @@
-comment "Atmel AT91 Specific Device Support"
-	depends on BR2_arm
-
-config BR2_TARGET_AT91
-	bool "Board support for the Atmel AT91 range of microprocessors"
-	depends on BR2_arm
-	help
-	  Atmel AT91 ARM based systems
-
-comment	"Selection criteria"
-	depends on BR2_TARGET_AT91
-
-config	BR2_TARGET_ATMEL_ALL
-	bool "Allow all ARM targets"
-	depends on BR2_TARGET_AT91
-	default y
-
-config	BR2_TARGET_ATMEL_NET
-	bool "With network controller"
-	depends on BR2_TARGET_AT91
-	depends on !BR2_TARGET_ATMEL_ALL
-	default y
-
-config	BR2_TARGET_ATMEL_LCD
-	bool "With LCD controller"
-	depends on BR2_TARGET_AT91
-	depends on !BR2_TARGET_ATMEL_ALL
-
-config	BR2_TARGET_ATMEL_FPDSP
-	bool "With Floating Point DSP"
-	depends on BR2_TARGET_AT91
-	depends on !BR2_TARGET_ATMEL_ALL
-
-config	BR2_TARGET_ATMEL_MPB
-	bool "With customizable MP-Block"
-	depends on BR2_TARGET_AT91
-	depends on !BR2_TARGET_ATMEL_ALL
-
-comment "Device Selection"
-	depends on BR2_TARGET_AT91
-
-choice
-	prompt "AT91 device"
-	depends on BR2_TARGET_AT91
-	default BR2_TARGET_AT91SAM9260
-	help
-	  Select the specific AT91 chip you wish to use.
-
-config BR2_TARGET_AT91RM9200
-	bool "Atmel AT91RM9200 Microprocessor"
-	depends on BR2_TARGET_AT91
-	depends on !BR2_TARGET_ATMEL_LCD
-	depends on !BR2_TARGET_ATMEL_FPDSP
-	depends on !BR2_TARGET_ATMEL_MPB
-	help
-	  Atmel AT91RM9200 ARM based systems
-
-config BR2_TARGET_AT91SAM9260
-	bool "Atmel AT91SAM9260 Microprocessor"
-	depends on BR2_TARGET_AT91
-	depends on !BR2_TARGET_ATMEL_LCD
-	depends on !BR2_TARGET_ATMEL_FPDSP
-	depends on !BR2_TARGET_ATMEL_MPB
-	help
-	  Atmel AT91SAM9260 ARM based systems
-
-config BR2_TARGET_AT91SAM9G20
-	bool "Atmel AT91SAM9G20 Microprocessor"
-	depends on BR2_TARGET_AT91
-	depends on !BR2_TARGET_ATMEL_LCD
-	depends on !BR2_TARGET_ATMEL_FPDSP
-	depends on !BR2_TARGET_ATMEL_MPB
-	help
-	  Atmel AT91SAM9G20 ARM based systems
-
-config BR2_TARGET_AT91SAM9261
-	bool "Atmel AT91SAM9261 Microprocessor"
-	depends on BR2_TARGET_AT91
-	depends on !BR2_TARGET_ATMEL_NET
-	depends on !BR2_TARGET_ATMEL_FPDSP
-	depends on !BR2_TARGET_ATMEL_MPB
-	help
-	  Atmel AT91SAM9261 ARM based systems
-
-config BR2_TARGET_AT91SAM9261S
-	bool "Atmel AT91SAM9261S Microprocessor"
-	depends on BR2_TARGET_AT91
-	depends on !BR2_TARGET_ATMEL_NET
-	depends on !BR2_TARGET_ATMEL_FPDSP
-	depends on !BR2_TARGET_ATMEL_MPB
-	depends on ! BR2_TARGET_AT91_ADVANCED_INFO
-	help
-	  Atmel AT91SAM9261 ARM based systems (Not Yet Implemented)
-
-config BR2_TARGET_AT91SAM9RL64
-	bool "Atmel AT91SAM9RL64 Microprocessor"
-	depends on BR2_TARGET_AT91
-	depends on !BR2_TARGET_ATMEL_NET
-	depends on !BR2_TARGET_ATMEL_FPDSP
-	depends on !BR2_TARGET_ATMEL_MPB
-	depends on ! BR2_TARGET_AT91_ADVANCED_INFO
-	help
-	  Atmel AT91SAM9RL64 ARM based systems (Not Yet Implemented)
-
-config BR2_TARGET_AT91SAM9263
-	bool "Atmel AT91SAM9263 Microprocessor"
-	depends on BR2_TARGET_AT91
-	depends on !BR2_TARGET_ATMEL_FPDSP
-	depends on !BR2_TARGET_ATMEL_MPB
-	help
-	  Atmel AT91SAM9263 ARM based systems
-
-config BR2_TARGET_AT91SAM9G40
-	bool "Atmel AT91SAM9G40 Microprocessor"
-	depends on BR2_TARGET_AT91
-	depends on !BR2_TARGET_ATMEL_FPDSP
-	depends on !BR2_TARGET_ATMEL_MPB
-	depends on ! BR2_TARGET_AT91_ADVANCED_INFO
-	help
-	  Atmel AT91SAM9G40 ARM based systems
-
-config BR2_TARGET_AT91SAM9G45
-	bool "Atmel AT91SAM9G45 Microprocessor"
-	depends on BR2_TARGET_AT91
-	depends on !BR2_TARGET_ATMEL_FPDSP
-	depends on !BR2_TARGET_ATMEL_MPB
-	help
-	  Atmel AT91SAM9G45 ARM based systems
-
-config BR2_TARGET_AT91SAM9M10
-	bool "Atmel AT91SAM9M10 Microprocessor"
-	depends on BR2_TARGET_AT91
-	depends on !BR2_TARGET_ATMEL_FPDSP
-	depends on !BR2_TARGET_ATMEL_MPB
-	depends on ! BR2_TARGET_AT91_ADVANCED_INFO
-	help
-	  Atmel AT91SAM9M10 ARM based systems
-
-config BR2_TARGET_AT91SAM9M11
-	bool "Atmel AT91SAM9M11 Microprocessor"
-	depends on BR2_TARGET_AT91
-	depends on !BR2_TARGET_ATMEL_FPDSP
-	depends on !BR2_TARGET_ATMEL_MPB
-	depends on ! BR2_TARGET_AT91_ADVANCED_INFO
-	help
-	  Atmel AT91SAM9M11 ARM based systems
-
-config BR2_TARGET_AT91SAM9XE
-	bool "Atmel AT91SAM9XE Microprocessors"
-	depends on BR2_TARGET_AT91
-	depends on !BR2_TARGET_ATMEL_LCD
-	depends on !BR2_TARGET_ATMEL_FPDSP
-	depends on !BR2_TARGET_ATMEL_MPB
-	depends on ! BR2_TARGET_AT91_ADVANCED_INFO
-	help
-	  Atmel AT91SAM9263 ARM based systems (Not Yet Implemented)
-
-config BR2_TARGET_AT572D940HF
-	bool "Atmel AT572D940HF Microprocessor"
-	depends on BR2_TARGET_AT91
-	depends on !BR2_TARGET_ATMEL_LCD
-	depends on !BR2_TARGET_ATMEL_MPB
-	depends on ! BR2_TARGET_AT91_ADVANCED_INFO
-	help
-	  Atmel AT572D940 ARM based systems
-
-config BR2_TARGET_AT91CAP9
-	bool "Atmel AT91CAP9 Microprocessor"
-	depends on BR2_TARGET_AT91
-	depends on !BR2_TARGET_ATMEL_FPDSP
-	depends on ! BR2_TARGET_AT91_ADVANCED_INFO
-	help
-	  Atmel AT91CAP9 ARM based systems
-
-endchoice
-
-comment "Development Board Selection"
-	depends on BR2_TARGET_AT91
-
-choice
-	prompt "Development Board support"
-	depends on BR2_TARGET_AT91
-	default BR2_TARGET_AT91SAM9260DFC
-	help
-	  Select the specific AT91 development board you wish to use.
-
-config BR2_TARGET_AT91RM9200DF
-	bool "Atmel AT91RM9200 Generic Dataflash(Card) Board Support"
-	depends on BR2_TARGET_AT91RM9200
-	select BR2_BOOTSOURCE_DATAFLASHCARD
-	help
-	  The Atmel AT91RM9200EK Development Board using Dataflashcard
-
-config BR2_TARGET_AT91RM9200EK
-	bool "Atmel AT91RM9200EK Development Board Support"
-	depends on BR2_TARGET_AT91RM9200
-	select BR2_BOOTSOURCE_DATAFLASHCARD
-	select BR2_BOOTSOURCE_FLASH
-	help
-	  The Atmel AT91RM9200EK Development Board
-
-config BR2_TARGET_AT91RM9200DK
-	bool "Atmel AT91RM9200DK Development Board Support"
-	depends on BR2_TARGET_AT91RM9200
-	select BR2_BOOTSOURCE_DATAFLASH
-	select BR2_BOOTSOURCE_FLASH
-	help
-	  The Atmel AT91RM9200DK Development Board
-
-config BR2_TARGET_AT91SAM9260DFC
-	bool "Atmel AT91SAM9260DFC"
-	depends on BR2_TARGET_AT91SAM9260 || BR2_TARGET_AT91SAM9XE
-	select BR2_BOOTSOURCE_DATAFLASHCARD
-	select BR2_BOOTSOURCE_DATAFLASH
-	help
-	  The Atmel AT91SAM9260 Development Board booting from Dataflashcard
-
-config BR2_TARGET_AT91SAM9260EK
-	bool "Atmel AT91SAM9260EK"
-	depends on BR2_TARGET_AT91SAM9260 || BR2_TARGET_AT91SAM9XE
-	select BR2_BOOTSOURCE_DATAFLASHCARD
-	select BR2_BOOTSOURCE_DATAFLASH
-	select BR2_BOOTSOURCE_NANDFLASH
-	help
-	  The Atmel AT91SAM9260 Development Board booting from dataflash
-
-config BR2_TARGET_AT91SAM9G20DFC
-	bool "Atmel AT91SAM9G20DFC"
-	depends on BR2_TARGET_AT91SAM9G20
-	select BR2_BOOTSOURCE_DATAFLASHCARD
-	help
-	  The Atmel AT91SAM9G20 Development Board booting from Dataflashcard
-
-config BR2_TARGET_AT91SAM9G20EK
-	bool "Atmel AT91SAM9G20EK"
-	depends on BR2_TARGET_AT91SAM9G20
-	select BR2_BOOTSOURCE_DATAFLASHCARD
-	select BR2_BOOTSOURCE_DATAFLASH
-	select BR2_BOOTSOURCE_NANDFLASH
-	help
-	  The Atmel AT91SAM9G20 Development Board booting from dataflash
-
-config BR2_TARGET_AT91SAM9XEEK
-	bool "Atmel AT91SAM9XE-EK"
-	depends on BR2_TARGET_AT91SAM9260 || BR2_TARGET_AT91SAM9XE
-	select BR2_BOOTSOURCE_DATAFLASHCARD
-	select BR2_BOOTSOURCE_DATAFLASH
-	select BR2_BOOTSOURCE_NANDFLASH
-	help
-	  The Atmel AT91SAM9xe Development Board (Not Yet Implemented)
-
-config BR2_TARGET_AT91SAM9261EK
-	bool "Atmel AT91SAM9261EK"
-	depends on BR2_TARGET_AT91SAM9261 || BR2_TARGET_AT91SAM9261S
-	select BR2_BOOTSOURCE_DATAFLASH
-	select BR2_BOOTSOURCE_NANDFLASH
-	help
-	  The Atmel AT91SAM9261 Development Board
-
-config BR2_TARGET_AT91SAM9RL64EK
-	bool "Atmel AT91SAM9RL64EK"
-	depends on BR2_TARGET_AT91SAM9RL64
-	select BR2_BOOTSOURCE_DATAFLASHCARD
-	select BR2_BOOTSOURCE_DATAFLASH
-	select BR2_BOOTSOURCE_NANDFLASH
-	select BR2_BOOTSOURCE_SDCARD
-	help
-	  The Atmel AT91SAM9RL64 Development Board
-
-config BR2_TARGET_AT91SAM9263EK
-	bool "Atmel AT91SAM9263EK"
-	depends on BR2_TARGET_AT91SAM9263
-	select BR2_BOOTSOURCE_DATAFLASHCARD
-	select BR2_BOOTSOURCE_NANDFLASH
-	help
-	  The Atmel AT91SAM9263 Development Board
-
-config BR2_TARGET_AT91SAM9G45EKES
-	bool "Atmel AT91SAM9G45EKES"
-	depends on BR2_TARGET_AT91SAM9G45
-	select BR2_BOOTSOURCE_DATAFLASHCARD
-	select BR2_BOOTSOURCE_NANDFLASH
-	help
-	  The Atmel AT91SAM9G45 Development Board
-
-config BR2_TARGET_AT572D940DCM
-	bool "Atmel AT572D940 Diopsis Computer Module"
-	depends on BR2_TARGET_AT572D940HF
-	select BR2_BOOTSOURCE_FLASH
-	select BR2_BOOTSOURCE_SDCARD
-	help
-	  The Atmel Diopsis CPU Module (Not Yet Implemented)
-
-config BR2_TARGET_AT91CAP9DK
-	bool "Atmel AT91CAP9DK"
-	depends on BR2_TARGET_AT91CAP9
-	select BR2_BOOTSOURCE_DATAFLASHCARD
-	select BR2_BOOTSOURCE_DATAFLASH
-	select BR2_BOOTSOURCE_NANDFLASH
-	help
-	  The Atmel AT91CAP9 Development Kit (Not Yet Implemented)
-
-config BR2_TARGET_AT91CAP9ADK
-	bool "Atmel AT91CAP9ADK"
-	depends on BR2_TARGET_AT91CAP9
-	select BR2_BOOTSOURCE_DATAFLASHCARD
-	select BR2_BOOTSOURCE_DATAFLASH
-	select BR2_BOOTSOURCE_NANDFLASH
-	help
-	  The Atmel AT91CAP9 Starter Kit (Not Yet Implemented)
-
-endchoice
-
-choice
-	prompt "SPI Mode"
-	depends on BR2_TARGET_AT91SAM9261EK
-	default BR2_TARGET_AT91SAM9261EK_SPIMODE0
-	help
-	  Select SPI Mode 0 or 3
-
-config BR2_TARGET_AT91SAM9261EK_SPIMODE0
-	bool "SPI Mode 0"
-	depends on BR2_TARGET_AT91SAM9261EK
-	help
-	  Use SPI Mode 0, Required for AT45DB642D chips
-
-config BR2_TARGET_AT91SAM9261EK_SPIMODE3
-	bool "SPI Mode 3"
-	depends on BR2_TARGET_AT91SAM9261EK
-	help
-	  Use SPI Mode 3
-
-endchoice
-
-
diff --git a/target/device/Atmel/AVR32_Config.in b/target/device/Atmel/AVR32_Config.in
deleted file mode 100644
index 7ae9fd4ed..000000000
--- a/target/device/Atmel/AVR32_Config.in
+++ /dev/null
@@ -1,82 +0,0 @@
-comment "Atmel AVR32 Specific Device Support"
-	depends on BR2_avr32
-
-config BR2_TARGET_AVR32
-	bool "Board support for the Atmel AP7 microprocessors"
-	depends on BR2_avr32
-	help
-	  Atmel AT32AP7XXX AVR32 based systems
-
-choice
-	prompt "AVR32 device"
-	depends on BR2_TARGET_AVR32
-	default BR2_TARGET_AT32AP7000
-	help
-	  Select the specific AVR32 chip you wish to use.
-
-config BR2_TARGET_AT32AP7000
-	bool "Board support for the Atmel AT32AP7000 Microprocessor"
-	depends on BR2_TARGET_AVR32
-	help
-	  Atmel AT32AP7000 AVR32 based systems
-
-config BR2_TARGET_AT32AP7001
-	bool "Board support for the Atmel AT32AP7001 Microprocessor"
-	depends on BR2_TARGET_AVR32
-	help
-	  Atmel AT32AP7001 AVR32 based systems
-
-config BR2_TARGET_AT32AP7002
-	bool "Board support for the Atmel AT32AP7002 Microprocessor"
-	depends on BR2_TARGET_AVR32
-	help
-	  Atmel AT32AP7002 AVR32 based systems
-
-config BR2_TARGET_AT32AP7200
-	bool "Board support for the Atmel AT32AP7200 Microprocessor"
-	depends on BR2_TARGET_AVR32
-	help
-	  Atmel AT32AP7200 AVR32 based systems
-
-endchoice
-
-comment "Development board support"
-	depends on BR2_TARGET_AVR32
-
-choice
-	prompt "Development board support"
-	depends on BR2_TARGET_AVR32
-	default BR2_TARGET_AVR32_ATSTK1000
-	help
-	  Select the specific AVR32 development board you wish to use.
-
-config BR2_TARGET_AVR32_ATSTK1002
-	bool "Atmel ATSTK1000/2 AVR32 development board support"
-	depends on BR2_TARGET_AT32AP7000
-	select BR2_PACKAGE_LINUX
-	help
-	  The Atmel ATSTK1000 AVR32 Development Board.
-
-config BR2_TARGET_AVR32_ATSTK1005
-	bool "Atmel ATSTK1000/5 AVR32 development board support"
-	depends on BR2_TARGET_AT32AP7200
-	select BR2_PACKAGE_LINUX
-	help
-	  The Atmel ATSTK1000 AVR32 Development Board,
-	  with the AT32AP7200 based top board
-
-config BR2_TARGET_AVR32_ATNGW100
-	bool "Atmel AVR32 network gateway board support"
-	depends on BR2_TARGET_AT32AP7000
-	select BR2_PACKAGE_LINUX
-	help
-	  The Atmel AVR32 Network Gateway Board.
-
-config BR2_TARGET_AVR32_ATNGW100_BASE
-	bool "Atmel AVR32 basic network gateway board support"
-	depends on BR2_TARGET_AT32AP7000
-	select BR2_PACKAGE_LINUX
-	help
-	  Very simple configuration for the Atmel AVR32 Network Gateway Board.
-
-endchoice
diff --git a/target/device/Atmel/Config.in b/target/device/Atmel/Config.in
deleted file mode 100644
index 1433af486..000000000
--- a/target/device/Atmel/Config.in
+++ /dev/null
@@ -1,62 +0,0 @@
-menuconfig BR2_TARGET_ATMEL
-	bool "Atmel Device Support"
-	depends on BR2_arm || BR2_avr32
-
-if BR2_TARGET_ATMEL
-
-source "target/device/Atmel/AT91_Config.in"
-source "target/device/Atmel/AVR32_Config.in"
-
-config BR2_BOARD_NAME
-	string
-	default	"at91rm9200df"		if	BR2_TARGET_AT91RM9200DF
-	default	"at91rm9200se"		if	BR2_TARGET_AT91RM9200SE
-	default	"at91rm9200ek"		if	BR2_TARGET_AT91RM9200EK
-	default	"at91rm9200dk"		if	BR2_TARGET_AT91RM9200DK
-	default	"at91sam9260ek"		if	BR2_TARGET_AT91SAM9260EK
-	default	"at91sam9260dfc"	if	BR2_TARGET_AT91SAM9260DFC
-	default	"at91sam9261ek"		if	BR2_TARGET_AT91SAM9261EK
-	default	"at91sam9262ek"		if	BR2_TARGET_AT91SAM9262EK
-	default	"at91sam9263ek"		if	BR2_TARGET_AT91SAM9263EK
-	default	"at91sam9xeek"		if	BR2_TARGET_AT91SAM9XEEK
-	default	"at91sam9g20ek"		if	BR2_TARGET_AT91SAM9G20EK
-	default	"at91sam9g20dfc"	if	BR2_TARGET_AT91SAM9G20DFC
-	default "at91sam9g45ekes"	if	BR2_TARGET_AT91SAM9G45EKES
-	default	"at91sam9m10ek"		if	BR2_TARGET_AT91SAM9M10EK
-	default	"at91sam9m10dfc"	if	BR2_TARGET_AT91SAM9M10DFC
-	default	"atstk100x"		if	BR2_TARGET_AVR32_ATSTK1002
-	default	"atstk1005"		if	BR2_TARGET_AVR32_ATSTK1005
-	default	"atngw100"		if	BR2_TARGET_AVR32_ATNGW100
-	default "atngw100-base"		if	BR2_TARGET_AVR32_ATNGW100_BASE
-	default "atngw100-expanded"	if	BR2_TARGET_AVR32_ATNGW100_EXPANDED
-
-config BR2_TARGET_AT91_ADVANCED_INFO
-	bool "Remove work in progress"
-	depends on BR2_TARGET_AT91
-	default y
-	help
-	  Atmel AT91 ARM based systems
-
-comment "Package support"
-	depends on BR2_TARGET_AT91 || BR2_TARGET_AVR32
-
-
-menu "Secondary locations"
-
-config BR2_AT91_LINUXPATCH_SITE
-	string "AT91 Linux Patch mirror site"
-	depends on BR2_TARGET_AT91
-	default "http://maxim.org.za/AT91RM9200/2.6"
-	help
-	    Main download location for AT91 Linux stuff
-
-config BR2_BOARD_PATH
-	string "Atmel board repository"
-	depends on BR2_TARGET_AT91 || BR2_TARGET_AVR32
-	default "target/device/Atmel/$(BR2_BOARD_NAME)"
-	help
-	  Top directory of Atmel board configurations
-
-endmenu
-
-endif
diff --git a/target/device/Atmel/Makefile.in b/target/device/Atmel/Makefile.in
deleted file mode 100644
index 5dacfdef6..000000000
--- a/target/device/Atmel/Makefile.in
+++ /dev/null
@@ -1,20 +0,0 @@
-# *******************************************************************
-
-ifeq ($(BR2_TARGET_ATMEL),y)
-ATMEL_PATH:=target/device/Atmel
-
-BOARD_NAME:=$(call qstrip,$(BR2_BOARD_NAME))
-BOARD_PATH:=$(call qstrip,$(BR2_BOARD_PATH))
-
-ATMEL_TARGET:=$(ATMEL_PATH)/root
-TARGET_SKELETON:=$(ATMEL_TARGET)/target_skeleton
-TARGET_SKELETON_LINKS:=$(ATMEL_TARGET)/skel.tar.gz
-
-ifeq ($(BR2_avr32),y)
-KERNEL_HEADERS_PATCH_DIR=target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2
-endif
-
-# Update things in board specific makefiles
-include target/device/Atmel/*/Makefile.in
-
-endif
diff --git a/target/device/Atmel/at91rm9200df/Makefile.in b/target/device/Atmel/at91rm9200df/Makefile.in
deleted file mode 100644
index 1ef7dc239..000000000
--- a/target/device/Atmel/at91rm9200df/Makefile.in
+++ /dev/null
@@ -1,6 +0,0 @@
-ifeq ($(strip $(BOARD_NAME)),at91rm9200df)
-LINUX_BOARD_NAME:=at91rm9200ek
-UBOOT_BOARD_NAME:=at91rm9200df
-endif
-
-
diff --git a/target/device/Atmel/at91sam9260dfc/Makefile.in b/target/device/Atmel/at91sam9260dfc/Makefile.in
deleted file mode 100644
index b3a4d2447..000000000
--- a/target/device/Atmel/at91sam9260dfc/Makefile.in
+++ /dev/null
@@ -1,22 +0,0 @@
-ifeq ($(strip $(BOARD_NAME)),at91sam9260dfc)
-LINUX26_BOARD_NAME=at91sam9260ek
-ifeq ($(U_BOOT_VERSION),1.2.0-atmel)
-UBOOT_BOARD_NAME:=at91sam9260dfc
-else
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD),)
-UBOOT_BOARD_NAME:=at91sam9260ek_dataflash_cs0
-endif
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH),)
-UBOOT_BOARD_NAME:=at91sam9260ek_dataflash_cs1
-endif
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH),)
-UBOOT_BOARD_NAME:=at91sam9260ek_nandflash
-endif
-
-endif
-
-endif
-
diff --git a/target/device/Atmel/at91sam9260pf/Makefile.in b/target/device/Atmel/at91sam9260pf/Makefile.in
deleted file mode 100644
index b43b670d6..000000000
--- a/target/device/Atmel/at91sam9260pf/Makefile.in
+++ /dev/null
@@ -1,7 +0,0 @@
-ifeq ($(BOARD_NAME),at91sam9260pf)
-LINUX26_BOARD_NAME=at91sam9260ek
-UBOOT_BOARD_NAME:=at91sam9260ek
-# Not functional for U-Boot
-# This needs to have a header file at91sam9260pf.h
-# which puts the environment in parallell flash
-endif
diff --git a/target/device/Atmel/at91sam9261ek/Makefile.in b/target/device/Atmel/at91sam9261ek/Makefile.in
deleted file mode 100644
index 23b5c6d8a..000000000
--- a/target/device/Atmel/at91sam9261ek/Makefile.in
+++ /dev/null
@@ -1,22 +0,0 @@
-ifeq ($(strip $(BOARD_NAME)),at91sam9261ek)
-LINUX_BOARD_NAME:=at91sam9261ek
-ifeq ($(U_BOOT_VERSION),1.2.0-atmel)
-UBOOT_BOARD_NAME:=at91sam9261ek
-else
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD),)
-UBOOT_BOARD_NAME:=at91sam9261ek_dataflash_cs0
-# use CS0 since we have to route CS0 to the SDcard
-# to allow boot from a card.
-# Note possible conflict with CS3 which needs to be
-# disabled both in U-Boot and in Linux
-endif
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH),)
-UBOOT_BOARD_NAME:=at91sam9261ek_dataflash_cs0
-endif
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH),)
-UBOOT_BOARD_NAME:=at91sam9261ek_nandflash
-endif
-endif
-endif
diff --git a/target/device/Atmel/at91sam9263ek/Makefile.in b/target/device/Atmel/at91sam9263ek/Makefile.in
deleted file mode 100644
index 2f51a8ba5..000000000
--- a/target/device/Atmel/at91sam9263ek/Makefile.in
+++ /dev/null
@@ -1,18 +0,0 @@
-ifeq ($(strip $(BOARD_NAME)),at91sam9263ek)
-LINUX_BOARD_NAME:=at91sam9263ek
-ifeq ($(U_BOOT_VERSION),1.2.0-atmel)
-UBOOT_BOARD_NAME:=at91sam9263ek
-else
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD),)
-UBOOT_BOARD_NAME:=at91sam9263ek_dataflash_cs0
-endif
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH),)
-UBOOT_BOARD_NAME:=at91sam9263ek_dataflash_cs1
-endif
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH),)
-UBOOT_BOARD_NAME:=at91sam9263ek_nandflash
-endif
-endif
-endif
diff --git a/target/device/Atmel/at91sam9g20dfc/Makefile.in b/target/device/Atmel/at91sam9g20dfc/Makefile.in
deleted file mode 100644
index 0b023fde8..000000000
--- a/target/device/Atmel/at91sam9g20dfc/Makefile.in
+++ /dev/null
@@ -1,17 +0,0 @@
-ifeq ($(strip $(BOARD_NAME)),at91sam9g20dfc)
-LINUX26_BOARD_NAME=at91sam9g20ek
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD),)
-UBOOT_BOARD_NAME:=at91sam9g20ek_dataflash_cs0
-endif
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH),)
-UBOOT_BOARD_NAME:=at91sam9g20ek_dataflash_cs1
-endif
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH),)
-UBOOT_BOARD_NAME:=at91sam9g20ek_nandflash
-endif
-
-endif
-
diff --git a/target/device/Atmel/atngw100-base/Makefile.in b/target/device/Atmel/atngw100-base/Makefile.in
deleted file mode 100644
index c2f296970..000000000
--- a/target/device/Atmel/atngw100-base/Makefile.in
+++ /dev/null
@@ -1,4 +0,0 @@
-ifeq ($(BR2_TARGET_AVR32_ATNGW100_BASE),y)
-UBOOT_BOARD_NAME:=atngw100
-TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
-endif
diff --git a/target/device/Atmel/atngw100/Makefile.in b/target/device/Atmel/atngw100/Makefile.in
deleted file mode 100644
index 7e02d8e83..000000000
--- a/target/device/Atmel/atngw100/Makefile.in
+++ /dev/null
@@ -1,4 +0,0 @@
-ifeq ($(BR2_TARGET_AVR32_ATNGW100),y)
-UBOOT_BOARD_NAME:=atngw100
-TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
-endif
diff --git a/target/device/Atmel/atstk1005/Makefile.in b/target/device/Atmel/atstk1005/Makefile.in
deleted file mode 100644
index 84b31070d..000000000
--- a/target/device/Atmel/atstk1005/Makefile.in
+++ /dev/null
@@ -1,3 +0,0 @@
-ifeq ($(strip $(BR2_TARGET_AVR32_ATSTK1005)),y)
-TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
-endif
diff --git a/target/device/Atmel/atstk100x/Makefile.in b/target/device/Atmel/atstk100x/Makefile.in
deleted file mode 100644
index 395c74a6e..000000000
--- a/target/device/Atmel/atstk100x/Makefile.in
+++ /dev/null
@@ -1,4 +0,0 @@
-ifeq ($(strip $(BR2_TARGET_AVR32_ATSTK1002)),y)
-UBOOT_BOARD_NAME:=atstk1002
-TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
-endif