summaryrefslogtreecommitdiff
path: root/target/device/jp/q5/kernel-patches-2.4.26
diff options
context:
space:
mode:
authorDavid Anders <dave123@abcsinc.com>2006-01-25 14:59:21 +0000
committerDavid Anders <dave123@abcsinc.com>2006-01-25 14:59:21 +0000
commit3d8aa36b65b2751d9dc8ba2c42a61f6ae5d5eeaf (patch)
tree17814f432b3cfb7aa5e3ef6aa14e70152c6cb3f5 /target/device/jp/q5/kernel-patches-2.4.26
parentc11d4552d4ae289dda2f675777eeafa1e4e9aab5 (diff)
add the amd au1500 based q5 board per case 0000374
Diffstat (limited to 'target/device/jp/q5/kernel-patches-2.4.26')
-rw-r--r--target/device/jp/q5/kernel-patches-2.4.26/001-q5730
-rw-r--r--target/device/jp/q5/kernel-patches-2.4.26/002-build_fixes81
-rw-r--r--target/device/jp/q5/kernel-patches-2.4.26/004-correct_toolchain24
-rw-r--r--target/device/jp/q5/kernel-patches-2.4.26/100-version11
4 files changed, 846 insertions, 0 deletions
diff --git a/target/device/jp/q5/kernel-patches-2.4.26/001-q5 b/target/device/jp/q5/kernel-patches-2.4.26/001-q5
new file mode 100644
index 000000000..70ca0c555
--- /dev/null
+++ b/target/device/jp/q5/kernel-patches-2.4.26/001-q5
@@ -0,0 +1,730 @@
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile
+--- linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile 2004-02-13 01:03:35.000000000 +0100
++++ linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile 2004-02-13 10:04:07.000000000 +0100
+@@ -16,7 +16,7 @@ all: au1000.o
+
+ O_TARGET := au1000.o
+
+-export-objs = prom.o clocks.o power.o usbdev.o
++export-objs = prom.o clocks.o power.o usbdev.o setup.o
+
+ obj-y := prom.o int-handler.o dma.o irq.o puts.o time.o reset.o \
+ clocks.o power.o setup.o sleeper.o
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/pci_fixup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/pci_fixup.c
+--- linux-2.4.25-rc2_org/arch/mips/au1000/common/pci_fixup.c 2004-02-13 01:03:35.000000000 +0100
++++ linux-2.4.25-rc2_q/arch/mips/au1000/common/pci_fixup.c 2004-02-13 10:09:43.000000000 +0100
+@@ -105,42 +105,8 @@ void __init pcibios_fixup(void)
+
+ void __init pcibios_fixup_irqs(void)
+ {
+-#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
+- unsigned int slot, func;
+- unsigned char pin;
+- struct pci_dev *dev;
+-
+- pci_for_each_dev(dev) {
+- if (dev->bus->number != 0)
+- return;
+-
+- dev->irq = 0xff;
+- slot = PCI_SLOT(dev->devfn);
+-#if defined( CONFIG_SOC_AU1500 )
+- switch (slot) {
+- case 12:
+- case 13:
+- default:
+- dev->irq = AU1000_PCI_INTA;
+- break;
+- }
+-#elif defined( CONFIG_SOC_AU1550 )
+- switch (slot) {
+- default:
+- case 12:
+- dev->irq = AU1000_PCI_INTA;
+- break;
+- case 13:
+- dev->irq = AU1000_PCI_INTB;
+- break;
+- }
+-#endif
+-
+- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+- DBG("slot %d irq %d\n", slot, dev->irq);
+- }
+-#endif
+ }
++
+ unsigned int pcibios_assign_all_busses(void)
+ {
+ return 0;
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c
+--- linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c 2004-02-13 01:03:32.000000000 +0100
++++ linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c 2004-02-13 10:07:12.000000000 +0100
+@@ -81,7 +81,7 @@ void prom_init_cmdline(void)
+ }
+
+
+-char *prom_getenv(char *envname)
++char *prom_getenv_n(char *envname, int n)
+ {
+ /*
+ * Return a pointer to the given environment variable.
+@@ -89,19 +89,24 @@ char *prom_getenv(char *envname)
+ */
+
+ t_env_var *env = (t_env_var *)prom_envp;
+- int i;
++ int i, j=0;
+
+ i = strlen(envname);
+
+ while(env->name) {
+ if(strncmp(envname, env->name, i) == 0) {
+- return(env->name + strlen(envname) + 1);
++ if(j++ == n) return(env->name + strlen(envname) + 1);
+ }
+ env++;
+ }
+ return(NULL);
+ }
+
++char *prom_getenv(char *envname)
++{
++ return prom_getenv_n(envname, 0);
++}
++
+ inline unsigned char str2hexnum(unsigned char c)
+ {
+ if(c >= '0' && c <= '9')
+@@ -128,18 +133,18 @@ inline void str2eaddr(unsigned char *ea,
+ }
+ }
+
+-int get_ethernet_addr(char *ethernet_addr)
++int get_ethernet_addr_n(char *ethernet_addr, int n)
+ {
+ char *ethaddr_str;
+
+- ethaddr_str = prom_getenv("ethaddr");
++ ethaddr_str = prom_getenv_n("ethaddr", n);
+ if (!ethaddr_str) {
+ printk("ethaddr not set in boot prom\n");
+ return -1;
+ }
+ str2eaddr(ethernet_addr, ethaddr_str);
+
+-#if 0
++#if 1
+ {
+ int i;
+
+@@ -153,7 +158,13 @@ int get_ethernet_addr(char *ethernet_add
+ return 0;
+ }
+
++int get_ethernet_addr(char *ethernet_addr)
++{
++ return get_ethernet_addr_n(ethernet_addr, 0);
++}
++
+ void prom_free_prom_memory (void) {}
++EXPORT_SYMBOL(get_ethernet_addr_n);
+ EXPORT_SYMBOL(prom_getcmdline);
+ EXPORT_SYMBOL(get_ethernet_addr);
+ EXPORT_SYMBOL(str2eaddr);
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c
+--- linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c 2004-02-13 01:03:31.000000000 +0100
++++ linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c 2004-02-13 10:04:07.000000000 +0100
+@@ -57,6 +57,7 @@ extern struct ide_ops *ide_ops;
+ #endif
+
+ extern struct rtc_ops no_rtc_ops;
++void (*__wbflush) (void);
+ extern char * __init prom_getcmdline(void);
+ extern void __init board_setup(void);
+ extern void au1000_restart(char *);
+@@ -71,6 +72,11 @@ static phys_t au1500_fixup_bigphys_addr(
+ extern void au1xxx_time_init(void);
+ extern void au1xxx_timer_setup(void);
+
++void au1500_wbflush(void)
++{
++ __asm__ volatile ("sync");
++}
++
+ void __init au1x00_setup(void)
+ {
+ char *argptr;
+@@ -89,6 +95,8 @@ void __init au1x00_setup(void)
+ }
+ #endif
+
++ __wbflush = au1500_wbflush;
++
+ #ifdef CONFIG_FB_AU1100
+ if ((argptr = strstr(argptr, "video=")) == NULL) {
+ argptr = prom_getcmdline();
+@@ -215,3 +223,6 @@ static phys_t au1500_fixup_bigphys_addr(
+ return phys_addr;
+ }
+ #endif
++
++EXPORT_SYMBOL(__wbflush);
++
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/pb1500/irqmap.c linux-2.4.25-rc2_q/arch/mips/au1000/pb1500/irqmap.c
+--- linux-2.4.25-rc2_org/arch/mips/au1000/pb1500/irqmap.c 2004-02-13 01:03:28.000000000 +0100
++++ linux-2.4.25-rc2_q/arch/mips/au1000/pb1500/irqmap.c 2004-02-13 10:10:21.000000000 +0100
+@@ -76,6 +76,7 @@ au1xxx_irq_map_t au1xxx_irq_map[] = {
+ { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
+ { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
+ { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
++ { AU1500_GPIO_206, INTC_INT_FALL_EDGE, 0 },
+ { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
+
+ { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/kernel/head.S linux-2.4.25-rc2_q/arch/mips/kernel/head.S
+--- linux-2.4.25-rc2_org/arch/mips/kernel/head.S 2004-02-13 01:02:42.000000000 +0100
++++ linux-2.4.25-rc2_q/arch/mips/kernel/head.S 2004-02-13 10:07:43.000000000 +0100
+@@ -33,7 +33,9 @@
+ * Reserved space for exception handlers.
+ * Necessary for machines which link their kernels at KSEG0.
+ */
+- .fill 0x400
++ j kernel_entry
++ nop
++ .org 0x400
+
+ /* The following two symbols are used for kernel profiling. */
+ EXPORT(stext)
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/Makefile linux-2.4.25-rc2_q/arch/mips/Makefile
+--- linux-2.4.25-rc2_org/arch/mips/Makefile 2004-02-13 01:01:00.000000000 +0100
++++ linux-2.4.25-rc2_q/arch/mips/Makefile 2004-04-09 10:40:09.000000000 +0200
+@@ -69,13 +69,13 @@ endif
+ set_gccflags = $(shell \
+ while :; do \
+ cpu=$(1); isa=-$(2); \
+- for gcc_opt in -march= -mcpu=; do \
++ for gcc_opt in -march=; do \
+ $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
+ -xc /dev/null > /dev/null 2>&1 && \
+ break 2; \
+ done; \
+ cpu=$(3); isa=-$(4); \
+- for gcc_opt in -march= -mcpu=; do \
++ for gcc_opt in -march=; do \
+ $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
+ -xc /dev/null > /dev/null 2>&1 && \
+ break 2; \
+@@ -90,7 +90,7 @@ else \
+ fi; \
+ gas_abi=-Wa,-32; gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \
+ while :; do \
+- for gas_opt in -Wa,-march= -Wa,-mcpu=; do \
++ for gas_opt in -Wa,-march=; do \
+ $(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \
+ -o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \
+ break 2; \
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c
+--- linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c 2004-02-12 23:51:10.000000000 +0100
++++ linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c 2004-02-13 10:11:06.000000000 +0100
+@@ -29,6 +29,7 @@
+ #include <linux/errno.h>
+ #include <linux/init.h>
+ #include <linux/input.h>
++#include <linux/pm.h>
+
+ void kbd_leds(unsigned char leds)
+ {
+@@ -140,3 +141,46 @@ void __init kbd_init_hw(void)
+ {
+ printk("Dummy keyboard driver installed.\n");
+ }
++
++
++void panic_blink(void)
++ {
++ }
++
++
++ int pckbd_translate(unsigned char scancode, unsigned char *keycode,
++ char raw_mode)
++ {
++ return 0;
++ }
++
++ char pckbd_unexpected_up(unsigned char keycode)
++ {
++ return 0;
++ }
++
++
++ void pckbd_leds(unsigned char leds)
++ {
++ }
++
++
++ int pckbd_setkeycode(unsigned int scancode, unsigned int keycode)
++ {
++ return 0;
++ }
++
++ int pckbd_getkeycode(unsigned int scancode)
++ {
++ return 0;
++ }
++
++ void __init pckbd_init_hw(void)
++ {
++ }
++
++ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data)
++ {
++ return 0;
++ }
++
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/Makefile linux-2.4.25-rc2_q/drivers/char/Makefile
+--- linux-2.4.25-rc2_org/drivers/char/Makefile 2004-02-12 23:50:40.000000000 +0100
++++ linux-2.4.25-rc2_q/drivers/char/Makefile 2004-02-13 10:11:06.000000000 +0100
+@@ -32,7 +32,7 @@ mod-subdirs := joystick ftape drm drm-4.
+ list-multi :=
+
+ KEYMAP =defkeymap.o
+-KEYBD =pc_keyb.o
++KEYBD =dummy_keyb.o
+ CONSOLE =console.o
+ SERIAL =serial.o
+
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c
+--- linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c 2004-02-13 00:49:45.000000000 +0100
++++ linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c 2004-03-16 10:04:18.000000000 +0100
+@@ -511,7 +511,7 @@ static int do_write_oneword(struct map_i
+ or tells us why it failed. */
+ dq6 = CMD(1<<6);
+ dq5 = CMD(1<<5);
+- timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */
++ timeo = jiffies + HZ; /* setting timeout to 1ms for now */
+
+ oldstatus = cfi_read(map, adr);
+ status = cfi_read(map, adr);
+@@ -540,9 +540,7 @@ static int do_write_oneword(struct map_i
+ oldstatus = cfi_read(map, adr);
+ status = cfi_read(map, adr);
+
+- if ( (oldstatus & 0x00FF) == (status & 0x00FF) ) {
+- printk(KERN_WARNING "Warning: DQ5 raised while program operation was in progress, however operation completed OK\n" );
+- } else {
++ if ( (oldstatus & 0x00FF) != (status & 0x00FF) ) {
+ /* DQ5 is active so we can do a reset and stop the erase */
+ cfi_write(map, CMD(0xF0), chip->start);
+ printk(KERN_WARNING "Internal flash device timeout occurred or write operation was performed while flash was programming.\n" );
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c
+--- linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c 2004-02-13 00:50:09.000000000 +0100
++++ linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c 2004-02-13 10:11:40.000000000 +0100
+@@ -86,28 +86,24 @@ static int mtd_parts_n
+ #else
+ static struct mtd_partition physmap_partitions[] = {
+ /* Put your own partition definitions here */
+-#if 0
+ {
+- name: "bootROM",
+- size: 0x80000,
++ name: "fs1",
++ size: 28*1024*1024,
+ offset: 0,
+- mask_flags: MTD_WRITEABLE, /* force read-only */
+ }, {
+- name: "zImage",
+- size: 0x100000,
++ name: "bootldr",
++ size: 128*1024,
+ offset: MTDPART_OFS_APPEND,
+ mask_flags: MTD_WRITEABLE, /* force read-only */
+ }, {
+- name: "ramdisk.gz",
+- size: 0x300000,
++ name: "kernel",
++ size: 1*1024*1024,
+ offset: MTDPART_OFS_APPEND,
+- mask_flags: MTD_WRITEABLE, /* force read-only */
+ }, {
+- name: "User FS",
++ name: "fs2",
+ size: MTDPART_SIZ_FULL,
+ offset: MTDPART_OFS_APPEND,
+ }
+-#endif
+ };
+
+ #define NUM_PARTITIONS (sizeof(physmap_partitions)/sizeof(struct mtd_partition))
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/au1000_eth.c linux-2.4.25-rc2_q/drivers/net/au1000_eth.c
+--- linux-2.4.25-rc2_org/drivers/net/au1000_eth.c 2004-02-12 23:33:59.000000000 +0100
++++ linux-2.4.25-rc2_q/drivers/net/au1000_eth.c 2004-02-13 10:06:01.000000000 +0100
+@@ -97,6 +97,7 @@ extern int get_ethernet_addr(char *ether
+ extern inline void str2eaddr(unsigned char *ea, unsigned char *str);
+ extern inline unsigned char str2hexnum(unsigned char c);
+ extern char * __init prom_getcmdline(void);
++extern int get_ethernet_addr_n(char *ethernet_addr, int n);
+
+ /*
+ * Theory of operation
+@@ -591,6 +592,99 @@ int ks8995m_status(struct net_device *de
+ return 0;
+ }
+
++int ns_83847_reset(struct net_device *dev, int phy_addr)
++ {
++ s16 mii_control, timeout;
++
++ // printk("ns_reset\n");
++ mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
++ mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET);
++ mdelay(1);
++ for (timeout = 100; timeout > 0; --timeout) {
++ mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
++ if ((mii_control & MII_CNTL_RESET) == 0)
++ break;
++ mdelay(1);
++ }
++ if (mii_control & MII_CNTL_RESET) {
++ printk(KERN_ERR "%s PHY reset timeout !\n", dev->name);
++ return -1;
++ }
++ return 0;
++ }
++
++int ns_83847_init(struct net_device *dev, int phy_addr)
++ {
++ s16 data;
++ // printk("ns_init\n");
++
++ /* Stop auto-negotiation */
++ // data = mdio_read(dev, phy_addr, MII_CONTROL);
++ // mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO);
++ // mdio_write(dev, phy_addr, 0, 0x0000);
++ mdio_write(dev, phy_addr, MII_CONTROL, MII_CNTL_F100 /* | MII_CNTL_FDX */);
++
++ /* Set advertisement to 10/100 and Half/Full duplex (full capabilities) */
++ data = mdio_read(dev, phy_addr, MII_ANADV);
++ /* obs PAUSE bit */
++ data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; /* MII_NWAY_T4 not sopported */ ;
++ mdio_write(dev, phy_addr, MII_ANADV, data);
++
++ /* Bypass led stretching? */
++ data = mdio_read(dev, phy_addr, MII_NS_PHYCTRL);
++ data |= MII_NS_PHYCTRL_BP_STRETCH;
++ mdio_write(dev, phy_addr, MII_NS_PHYCTRL, data);
++
++ /* Restart auto-negotiation */
++ data = mdio_read(dev, phy_addr, MII_CONTROL);
++ data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO;
++ mdio_write(dev, phy_addr, MII_CONTROL, data);
++
++ return 0;
++ }
++
++int ns_83847_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed)
++ {
++ u16 mii_data;
++ struct au1000_private *aup;
++
++ if (!dev) {
++ printk(KERN_ERR "ns_83847_status error: NULL dev\n");
++ return -1;
++ }
++ aup = (struct au1000_private *) dev->priv;
++
++ mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS);
++ // printk("ns_status: %04x\n", mii_data);
++ if (mii_data & MII_STAT_LINK) {
++ *link = 1;
++ mii_data = mdio_read(dev, aup->phy_addr, MII_NS_PHYSTS);
++ if (mii_data & MII_NS_PHYSTS_SPEED_10) {
++ *speed = IF_PORT_10BASET;
++ dev->if_port = IF_PORT_10BASET;
++ }
++ else {
++ if (mii_data & MII_NS_PHYSTS_DUPLEX_FULL) {
++ *speed = IF_PORT_100BASEFX;
++ dev->if_port = IF_PORT_100BASEFX;
++ }
++ else {
++ *speed = IF_PORT_100BASETX;
++ dev->if_port = IF_PORT_100BASETX;
++ }
++ }
++
++ }
++ else {
++ *link = 0;
++ *speed = 0;
++ dev->if_port = IF_PORT_UNKNOWN;
++ }
++ return 0;
++ }
++
++
++
+ #ifdef CONFIG_MIPS_BOSPORUS
+ int stub_init(struct net_device *dev, int phy_addr)
+ {
+@@ -616,6 +710,12 @@ stub_status(struct net_device *dev, int
+ }
+ #endif
+
++struct phy_ops ns_83847_ops = {
++ ns_83847_init,
++ ns_83847_reset,
++ ns_83847_status,
++};
++
+ struct phy_ops bcm_5201_ops = {
+ bcm_5201_init,
+ bcm_5201_reset,
+@@ -667,6 +767,7 @@ static struct mii_chip_info {
+ struct phy_ops *phy_ops;
+ int dual_phy;
+ } mii_chip_table[] = {
++ {"Natsemi DP83847 PHY", 0x2000, 0x5c30, &ns_83847_ops },
+ {"Broadcom BCM5201 10/100 BaseT PHY",0x0040,0x6212, &bcm_5201_ops,0},
+ {"Broadcom BCM5221 10/100 BaseT PHY",0x0040,0x61e4, &bcm_5201_ops,0},
+ {"Broadcom BCM5222 10/100 BaseT PHY",0x0040,0x6322, &bcm_5201_ops,1},
+@@ -868,6 +969,8 @@ static int mii_probe (struct net_device
+ }
+ }
+ }
++ printk(KERN_ERR "%s: Au1x No MII transceivers found!\n", dev->name);
++ return -1;
+ found:
+
+ #ifdef CONFIG_MIPS_BOSPORUS
+@@ -1176,21 +1279,10 @@ au1000_probe(u32 ioaddr, int irq, int po
+ switch (ioaddr) {
+ case AU1000_ETH0_BASE:
+ case AU1500_ETH0_BASE:
+- /* check env variables first */
+ if (!get_ethernet_addr(ethaddr)) {
+ memcpy(au1000_mac_addr, ethaddr, sizeof(dev->dev_addr));
+ } else {
+- /* Check command line */
+- argptr = prom_getcmdline();
+- if ((pmac = strstr(argptr, "ethaddr=")) == NULL) {
+- printk(KERN_INFO "%s: No mac address found\n",
+- dev->name);
+- /* use the hard coded mac addresses */
+- } else {
+- str2eaddr(ethaddr, pmac + strlen("ethaddr="));
+- memcpy(au1000_mac_addr, ethaddr,
+- sizeof(dev->dev_addr));
+- }
++ printk(KERN_INFO "%s: No mac address found\n", dev->name);
+ }
+ if (ioaddr == AU1000_ETH0_BASE)
+ aup->enable = (volatile u32 *)
+@@ -1206,6 +1298,11 @@ au1000_probe(u32 ioaddr, int irq, int po
+
+ case AU1000_ETH1_BASE:
+ case AU1500_ETH1_BASE:
++ if (!get_ethernet_addr_n(ethaddr, 1)) {
++ memcpy(au1000_mac_addr, ethaddr, sizeof(dev->dev_addr));
++ } else {
++ printk(KERN_INFO "%s: No mac address found\n", dev->name);
++ }
+ if (ioaddr == AU1000_ETH1_BASE)
+ aup->enable = (volatile u32 *)
+ ((unsigned long)AU1000_MAC1_ENABLE);
+@@ -1213,7 +1310,6 @@ au1000_probe(u32 ioaddr, int irq, int po
+ aup->enable = (volatile u32 *)
+ ((unsigned long)AU1500_MAC1_ENABLE);
+ memcpy(dev->dev_addr, au1000_mac_addr, sizeof(dev->dev_addr));
+- dev->dev_addr[4] += 0x10;
+ setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR);
+ aup->mac_id = 1;
+ au_macs[1] = aup;
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/au1000_eth.h linux-2.4.25-rc2_q/drivers/net/au1000_eth.h
+--- linux-2.4.25-rc2_org/drivers/net/au1000_eth.h 2004-02-12 23:33:54.000000000 +0100
++++ linux-2.4.25-rc2_q/drivers/net/au1000_eth.h 2004-02-13 10:06:01.000000000 +0100
+@@ -86,6 +86,28 @@
+ #define MII_STAT_CAN_TX_FDX 0x4000
+ #define MII_STAT_CAN_T4 0x8000
+
++/* mii registers for NS 83847 */
++#define MII_NS_PHYSTS 0x10
++#define MII_NS_FCSCR 0x14
++#define MII_NS_RECR 0x15
++#define MII_NS_PCSR 0x16
++#define MII_NS_PHYCTRL 0x19
++#define MII_NS_10BTSCR 0x1a
++#define MII_NS_CDCTRL 0x1b
++
++/* MII_NS_PHYSTS bits */
++#define MII_NS_PHYSTS_LINK (1)
++#define MII_NS_PHYSTS_SPEED_10 (1<<1)
++#define MII_NS_PHYSTS_DUPLEX_FULL (1<<2)
++
++/* MII_NS_PHYCTRL bits */
++#define MII_NS_PHYCTRL_BP_STRETCH (1<<8)
++
++/* MII_NS_CDCTRL bits */
++#define MII_NS_CDCTRL_CD_ENABLE (1<<15)
++#define MII_NS_CDCTRL_RISETIME (1<<11)
++#define MII_NS_CDCTRL_FALLTIME (1<<9)
++
+
+ #define MII_ID1_OUI_LO 0xFC00 /* low bits of OUI mask */
+ #define MII_ID1_MODEL 0x03F0 /* model number */
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/natsemi.c linux-2.4.25-rc2_q/drivers/net/natsemi.c
+--- linux-2.4.25-rc2_org/drivers/net/natsemi.c 2004-02-12 23:29:19.000000000 +0100
++++ linux-2.4.25-rc2_q/drivers/net/natsemi.c 2004-04-22 09:28:51.000000000 +0200
+@@ -773,7 +773,11 @@ static int __devinit natsemi_probe1 (str
+ goto err_ioremap;
+ }
+
+- /* Work around the dropped serial bit. */
++#ifdef __mips__
++ if (get_ethernet_addr_n(dev->dev_addr, 2)) {
++ printk(KERN_INFO "%s: No mac address found\n", dev->name);
++ }
++#else
+ prev_eedata = eeprom_read(ioaddr, 6);
+ for (i = 0; i < 3; i++) {
+ int eedata = eeprom_read(ioaddr, i + 7);
+@@ -781,6 +785,7 @@ static int __devinit natsemi_probe1 (str
+ dev->dev_addr[i*2+1] = eedata >> 7;
+ prev_eedata = eedata;
+ }
++#endif
+
+ dev->base_addr = ioaddr;
+ dev->irq = irq;
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h
+--- linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h 2004-02-12 23:47:43.000000000 +0100
++++ linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h 2004-02-13 10:13:40.000000000 +0100
+@@ -302,9 +302,9 @@ typedef struct hermes_response {
+ #define hermes_read_reg(hw, off) ((hw)->io_space ? \
+ inw((hw)->iobase + ( (off) << (hw)->reg_spacing )) : \
+ readw((hw)->iobase + ( (off) << (hw)->reg_spacing )))
+-#define hermes_write_reg(hw, off, val) ((hw)->io_space ? \
+- outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )) : \
+- writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )))
++#define hermes_write_reg(hw, off, val) { if((hw)->io_space) \
++ outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )); else \
++ writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing ));}
+
+ #define hermes_read_regn(hw, name) (hermes_read_reg((hw), HERMES_##name))
+ #define hermes_write_regn(hw, name, val) (hermes_write_reg((hw), HERMES_##name, (val)))
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/au1000.h linux-2.4.25-rc2_q/include/asm-mips/au1000.h
+--- linux-2.4.25-rc2_org/include/asm-mips/au1000.h 2004-02-12 23:06:31.000000000 +0100
++++ linux-2.4.25-rc2_q/include/asm-mips/au1000.h 2004-02-13 10:41:49.000000000 +0100
+@@ -283,14 +283,14 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
+ #define INTC_INT_HIGH_AND_LOW_LEVEL 0x7
+
+ /* Interrupt Numbers */
+-#define AU1000_UART0_INT 0
++#define AU1000_UART0_INT 3
+ #define AU1000_UART1_INT 1 /* au1000 */
+ #define AU1000_UART2_INT 2 /* au1000 */
+
+ #define AU1000_PCI_INTA 1 /* au1500 */
+ #define AU1000_PCI_INTB 2 /* au1500 */
+
+-#define AU1000_UART3_INT 3
++#define AU1000_UART3_INT 0
+
+ #define AU1000_SSI0_INT 4 /* au1000 */
+ #define AU1000_SSI1_INT 5 /* au1000 */
+@@ -693,12 +693,12 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
+
+
+ /* UARTS 0-3 */
+-#define UART0_ADDR 0xB1100000
++#define UART0_ADDR 0xB1400000
+ #define UART1_ADDR 0xB1200000
+ #define UART2_ADDR 0xB1300000
+-#define UART3_ADDR 0xB1400000
++#define UART3_ADDR 0xB1100000
+ #define UART_BASE UART0_ADDR
+-#define UART_DEBUG_BASE UART3_ADDR
++#define UART_DEBUG_BASE UART0_ADDR
+
+ #define UART_RX 0 /* Receive buffer */
+ #define UART_TX 4 /* Transmit buffer */
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/page.h linux-2.4.25-rc2_q/include/asm-mips/page.h
+--- linux-2.4.25-rc2_org/include/asm-mips/page.h 2004-02-12 23:06:14.000000000 +0100
++++ linux-2.4.25-rc2_q/include/asm-mips/page.h 2004-03-23 14:18:38.000000000 +0100
+@@ -13,7 +13,6 @@
+ #include <linux/config.h>
+ #include <asm/break.h>
+
+-#ifdef __KERNEL__
+
+ /*
+ * PAGE_SHIFT determines the page size
+@@ -30,6 +29,7 @@
+ #define PAGE_SIZE (1L << PAGE_SHIFT)
+ #define PAGE_MASK (~(PAGE_SIZE-1))
+
++#ifdef __KERNEL__
+ #ifndef __ASSEMBLY__
+
+ #include <asm/cacheflush.h>
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/wbflush.h linux-2.4.25-rc2_q/include/asm-mips/wbflush.h
+--- linux-2.4.25-rc2_org/include/asm-mips/wbflush.h 2004-02-12 23:06:33.000000000 +0100
++++ linux-2.4.25-rc2_q/include/asm-mips/wbflush.h 2004-02-13 20:42:57.000000000 +0100
+@@ -15,8 +15,11 @@
+
+ #ifdef CONFIG_CPU_HAS_WB
+
+-extern void (*__wbflush)(void);
+-extern void wbflush_setup(void);
++//extern void (*__wbflush)(void);
++//extern void wbflush_setup(void);
++
++
++#define __wbflush() { __asm__ volatile ("sync"); }
+
+ #define wbflush() \
+ do { \
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/cs_types.h linux-2.4.25-rc2_q/include/pcmcia/cs_types.h
+--- linux-2.4.25-rc2_org/include/pcmcia/cs_types.h 2004-02-12 23:13:05.000000000 +0100
++++ linux-2.4.25-rc2_q/include/pcmcia/cs_types.h 2004-02-13 10:15:10.000000000 +0100
+@@ -37,6 +37,7 @@
+ #endif
+
+ #if defined(__arm__) || defined(__mips__)
++//obs jp: on mips, "typedef unsigned long long ioaddr_t;" may be needed to support cardbus
+ typedef u_int ioaddr_t;
+ #else
+ typedef u_short ioaddr_t;
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/ss.h linux-2.4.25-rc2_q/include/pcmcia/ss.h
+--- linux-2.4.25-rc2_org/include/pcmcia/ss.h 2004-02-12 23:13:02.000000000 +0100
++++ linux-2.4.25-rc2_q/include/pcmcia/ss.h 2004-02-13 10:15:32.000000000 +0100
+@@ -112,7 +112,7 @@ typedef struct pccard_mem_map {
+ u_char map;
+ u_char flags;
+ u_short speed;
+- u_long sys_start, sys_stop;
++ ioaddr_t sys_start, sys_stop;
+ u_int card_start;
+ } pccard_mem_map;
+
+diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/init/do_mounts.c linux-2.4.25-rc2_q/init/do_mounts.c
+--- linux-2.4.25-rc2_org/init/do_mounts.c 2004-02-12 22:59:08.000000000 +0100
++++ linux-2.4.25-rc2_q/init/do_mounts.c 2004-02-13 10:16:02.000000000 +0100
+@@ -760,8 +760,6 @@ static void __init devfs_make_root(char
+ static void __init mount_root(void)
+ {
+ #ifdef CONFIG_ROOT_NFS
+- if (MAJOR(ROOT_DEV) == NFS_MAJOR
+- && MINOR(ROOT_DEV) == NFS_MINOR) {
+ if (mount_nfs_root()) {
+ sys_chdir("/root");
+ ROOT_DEV = current->fs->pwdmnt->mnt_sb->s_dev;
+@@ -770,7 +768,6 @@ static void __init mount_root(void)
+ }
+ printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n");
+ ROOT_DEV = MKDEV(FLOPPY_MAJOR, 0);
+- }
+ #endif
+ devfs_make_root(root_device_name);
+ create_dev("/dev/root", ROOT_DEV, root_device_name);
+
diff --git a/target/device/jp/q5/kernel-patches-2.4.26/002-build_fixes b/target/device/jp/q5/kernel-patches-2.4.26/002-build_fixes
new file mode 100644
index 000000000..a5928504e
--- /dev/null
+++ b/target/device/jp/q5/kernel-patches-2.4.26/002-build_fixes
@@ -0,0 +1,81 @@
+diff -Naur linux-2.4.26-q5.org/arch/mips/au1000/common/clocks.c linux-2.4.26-q5/arch/mips/au1000/common/clocks.c
+--- linux-2.4.26-q5.org/arch/mips/au1000/common/clocks.c 2003-08-25 07:44:39.000000000 -0400
++++ linux-2.4.26-q5/arch/mips/au1000/common/clocks.c 2005-06-23 02:52:03.390000000 -0400
+@@ -85,9 +85,8 @@
+ lcd_clock = sys_busclk / 4;
+
+ if (lcd_clock > 50000) /* Epson MAX */
+- printk(__FUNCTION__
+- ": warning: LCD clock too high (%d KHz)\n",
+- lcd_clock);
++ printk("%s: warning: LCD clock too high (%d KHz)\n",
++ __FUNCTION__, lcd_clock);
+ }
+
+ unsigned int get_au1x00_lcd_clock(void)
+--- linux-2.4.26-q5.org/arch/mips/kernel/time.c 2004-02-18 08:36:30.000000000 -0500
++++ linux-2.4.26-q5/arch/mips/kernel/time.c 2005-06-23 03:13:07.720000000 -0400
+@@ -25,6 +25,7 @@
+ #include <linux/interrupt.h>
+ #include <linux/module.h>
+
++#include <asm/compiler.h>
+ #include <asm/bootinfo.h>
+ #include <asm/cpu.h>
+ #include <asm/time.h>
+@@ -242,7 +243,7 @@
+ __asm__("multu %1,%2"
+ : "=h" (res)
+ : "r" (count), "r" (sll32_usecs_per_cycle)
+- : "lo", "accum");
++ : "lo", GCC_REG_ACCUM);
+
+ /*
+ * Due to possible jiffies inconsistencies, we need to check
+@@ -297,7 +298,7 @@
+ __asm__("multu %1,%2"
+ : "=h" (res)
+ : "r" (count), "r" (quotient)
+- : "lo", "accum");
++ : "lo", GCC_REG_ACCUM);
+
+ /*
+ * Due to possible jiffies inconsistencies, we need to check
+@@ -339,7 +340,7 @@
+ : "r" (timerhi), "m" (timerlo),
+ "r" (tmp), "r" (USECS_PER_JIFFY),
+ "r" (USECS_PER_JIFFY_FRAC)
+- : "hi", "lo", "accum");
++ : "hi", "lo", GCC_REG_ACCUM);
+ cached_quotient = quotient;
+ }
+ }
+@@ -353,7 +354,7 @@
+ __asm__("multu %1,%2"
+ : "=h" (res)
+ : "r" (count), "r" (quotient)
+- : "lo", "accum");
++ : "lo", GCC_REG_ACCUM);
+
+ /*
+ * Due to possible jiffies inconsistencies, we need to checkdiff -Naur linux-2.4.26-q5.org/include/asm-mips/compiler.h linux-2.4.26-q5/include/asm-mips/compiler.h
+--- linux-2.4.26-q5.org/include/asm-mips/compiler.h 1969-12-31 19:00:00.000000000 -0500
++++ linux-2.4.26-q5/include/asm-mips/compiler.h 2005-06-23 02:52:25.000000000 -0400
+@@ -0,0 +1,17 @@
++/*
++ * Copyright (C) 2004 Maciej W. Rozycki
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ */
++#ifndef _ASM_COMPILER_H
++#define _ASM_COMPILER_H
++
++#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)
++#define GCC_REG_ACCUM "$0"
++#else
++#define GCC_REG_ACCUM "accum"
++#endif
++
++#endif /* _ASM_COMPILER_H */
diff --git a/target/device/jp/q5/kernel-patches-2.4.26/004-correct_toolchain b/target/device/jp/q5/kernel-patches-2.4.26/004-correct_toolchain
new file mode 100644
index 000000000..53e509d3a
--- /dev/null
+++ b/target/device/jp/q5/kernel-patches-2.4.26/004-correct_toolchain
@@ -0,0 +1,24 @@
+--- linux-2.4.29/arch/mips/Makefile.orig 2005-03-08 23:24:05.000000000 -0700
++++ linux-2.4.29/arch/mips/Makefile 2005-03-08 23:27:37.000000000 -0700
+@@ -17,16 +17,16 @@
+ # Select the object file format to substitute into the linker script.
+ #
+ ifdef CONFIG_CPU_LITTLE_ENDIAN
+-tool-prefix = mipsel-linux-
++#tool-prefix = mipsel-linux-
+ ld-emul = elf32ltsmip
+ else
+-tool-prefix = mips-linux-
++#tool-prefix = mips-linux-
+ ld-emul = elf32btsmip
+ endif
+
+-ifdef CONFIG_CROSSCOMPILE
+-CROSS_COMPILE = $(tool-prefix)
+-endif
++#ifdef CONFIG_CROSSCOMPILE
++#CROSS_COMPILE = $(tool-prefix)
++#endif
+
+ MAKEBOOT = $(MAKE) -C arch/$(ARCH)/boot
+
diff --git a/target/device/jp/q5/kernel-patches-2.4.26/100-version b/target/device/jp/q5/kernel-patches-2.4.26/100-version
new file mode 100644
index 000000000..813d45f15
--- /dev/null
+++ b/target/device/jp/q5/kernel-patches-2.4.26/100-version
@@ -0,0 +1,11 @@
+--- linux/Makefile.orig 2004-08-18 14:17:14.000000000 -0600
++++ linux/Makefile 2004-08-18 14:17:54.000000000 -0600
+@@ -1,7 +1,7 @@
+ VERSION = 2
+ PATCHLEVEL = 4
+ SUBLEVEL = 26
+-EXTRAVERSION =
++EXTRAVERSION =-q5
+
+ KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
+