Remove jp BSP which only provide support for linux-2.4

1 files changed, 0 insertions, 342 deletions

diff --git a/target/device/jp/q5/kernel-patches-2.4.32/001-q5 b/target/device/jp/q5/kernel-patches-2.4.32/001-q5
deleted file mode 100644
index 1e2718a7a..000000000
--- a/target/device/jp/q5/kernel-patches-2.4.32/001-q5
+++ /dev/null
@@ -1,342 +0,0 @@
-diff -Naur linux-2.4.31.org/arch/mips/Makefile linux-2.4.31/arch/mips/Makefile
---- linux-2.4.31.org/arch/mips/Makefile	2005-01-19 09:09:26.000000000 -0500
-+++ linux-2.4.31/arch/mips/Makefile	2005-09-10 17:29:44.000000000 -0400
-@@ -241,6 +241,16 @@
- endif
- 
- #
-+# jp-embedded Q5 board
-+#
-+ifdef CONFIG_MIPS_Q5
-+LIBS		+= arch/mips/jp-embedded/q5/q5.o \
-+		   arch/mips/au1000/common/au1000.o
-+SUBDIRS		+= arch/mips/jp-embedded/q5 arch/mips/au1000/common
-+LOADADDR	:= 0x80100000
-+endif
-+
-+#
- # Au1x00 (AMD/Alchemy) eval boards
- #
- ifdef CONFIG_MIPS_DB1000
-diff -Naur linux-2.4.31.org/arch/mips/au1000/common/pci_fixup.c linux-2.4.31/arch/mips/au1000/common/pci_fixup.c
---- linux-2.4.31.org/arch/mips/au1000/common/pci_fixup.c	2005-01-19 09:09:26.000000000 -0500
-+++ linux-2.4.31/arch/mips/au1000/common/pci_fixup.c	2005-09-10 17:47:29.000000000 -0400
-@@ -101,7 +101,7 @@
- 
- void __init pcibios_fixup_irqs(void)
- {
--#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
-+#if defined( CONFIG_MIPS_PB1500 ) || defined( CONFIG_MIPS_PB1550 )
- 	unsigned int slot;
- 	unsigned char pin;
- 	struct pci_dev *dev;
-diff -Naur linux-2.4.31.org/arch/mips/config-shared.in linux-2.4.31/arch/mips/config-shared.in
---- linux-2.4.31.org/arch/mips/config-shared.in	2005-01-19 09:09:27.000000000 -0500
-+++ linux-2.4.31/arch/mips/config-shared.in	2005-08-23 00:30:32.000000000 -0400
-@@ -31,6 +31,7 @@
- dep_bool 'Support for Alchemy PB1500 board' CONFIG_MIPS_PB1500 $CONFIG_MIPS32
- dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32
- dep_bool 'Support for Alchemy PB1550 board' CONFIG_MIPS_PB1550 $CONFIG_MIPS32
-+dep_bool 'Support for jp-embedded Q5 board' CONFIG_MIPS_Q5 $CONFIG_MIPS32
- dep_bool 'Support for MyCable XXS1500 board' CONFIG_MIPS_XXS1500 $CONFIG_MIPS32
- dep_bool 'Support for 4G Systems MTX-1 board' CONFIG_MIPS_MTX1 $CONFIG_MIPS32
- dep_bool 'Support for Cogent CSB250 board' CONFIG_COGENT_CSB250 $CONFIG_MIPS32
-@@ -277,6 +278,12 @@
-    define_bool CONFIG_NONCOHERENT_IO y
-    define_bool CONFIG_PC_KEYB y
- fi
-+if [ "$CONFIG_MIPS_Q5" = "y" ]; then
-+   define_bool CONFIG_SOC_AU1X00 y
-+   define_bool CONFIG_SOC_AU1500 y
-+   define_bool CONFIG_NONCOHERENT_IO y
-+   define_bool CONFIG_PC_KEYB y
-+fi
- if [ "$CONFIG_MIPS_DB1000" = "y" ]; then
-    define_bool CONFIG_SOC_AU1X00 y
-    define_bool CONFIG_SOC_AU1000 y
-@@ -729,6 +736,7 @@
-      "$CONFIG_MIPS_PB1000" = "y" -o \
-      "$CONFIG_MIPS_PB1100" = "y" -o \
-      "$CONFIG_MIPS_PB1500" = "y" -o \
-+     "$CONFIG_MIPS_Q5" = "y" -o \
-      "$CONFIG_NEC_OSPREY" = "y" -o \
-      "$CONFIG_NEC_EAGLE" = "y" -o \
-      "$CONFIG_NINO" = "y" -o \
-diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/Makefile linux-2.4.31/arch/mips/jp-embedded/q5/Makefile
---- linux-2.4.31.org/arch/mips/jp-embedded/q5/Makefile	1969-12-31 19:00:00.000000000 -0500
-+++ linux-2.4.31/arch/mips/jp-embedded/q5/Makefile	2005-09-10 16:46:20.000000000 -0400
-@@ -0,0 +1,9 @@
-+USE_STANDARD_AS_RULE := true
-+
-+O_TARGET := q5.o
-+
-+export-objs = init.o
-+
-+obj-y := init.o board_setup.o irqmap.o
-+
-+include $(TOPDIR)/Rules.make
-diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/board_setup.c linux-2.4.31/arch/mips/jp-embedded/q5/board_setup.c
---- linux-2.4.31.org/arch/mips/jp-embedded/q5/board_setup.c	1969-12-31 19:00:00.000000000 -0500
-+++ linux-2.4.31/arch/mips/jp-embedded/q5/board_setup.c	2005-08-30 14:46:21.000000000 -0400
-@@ -0,0 +1,97 @@
-+/*
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ *	jp-embedded Q5 board setup.
-+ *
-+ * Author: jp@jp-embedded.com
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/ioport.h>
-+#include <linux/mm.h>
-+#include <linux/console.h>
-+#include <linux/mc146818rtc.h>
-+#include <linux/delay.h>
-+
-+#include <asm/cpu.h>
-+#include <asm/bootinfo.h>
-+#include <asm/irq.h>
-+#include <asm/keyboard.h>
-+#include <asm/mipsregs.h>
-+#include <asm/reboot.h>
-+#include <asm/pgtable.h>
-+#include <asm/au1000.h>
-+#include <asm/pb1500.h>
-+
-+#ifdef CONFIG_USB_OHCI
-+// Enable the workaround for the OHCI DoneHead
-+// register corruption problem.
-+#define CONFIG_AU1000_OHCI_FIX
-+#endif
-+
-+#ifdef CONFIG_RTC
-+extern struct rtc_ops pb1500_rtc_ops;
-+#endif
-+
-+void board_reset (void)
-+{
-+    /* Hit BCSR.SYSTEM_CONTROL[SW_RST] obs */
-+    au_writel(0x00000000, 0xAE00001C);
-+}
-+
-+void __init board_setup(void)
-+{
-+	u32 pin_func;
-+	u32 sys_freqctrl, sys_clksrc;
-+
-+#ifdef CONFIG_PCI
-+	// Setup PCI bus controller
-+	au_writel(0, Au1500_PCI_CMEM);
-+	au_writel(0x00003fff, Au1500_CFG_BASE);
-+	au_writel(0xf, Au1500_PCI_CFG);
-+	au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV);
-+	au_writel(0, Au1500_PCI_MWBASE_REV_CCL);
-+	au_writel(0x02a00356, Au1500_PCI_STATCMD);
-+	au_writel(0x00003c04, Au1500_PCI_HDRTYPE);
-+	au_writel(0x00000008, Au1500_PCI_MBAR);
-+	au_sync();
-+#endif
-+
-+	/* Enable sys bus clock divider when IDLE state or no bus activity. */
-+	au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
-+
-+#ifdef CONFIG_RTC
-+	rtc_ops = &pb1500_rtc_ops;
-+	// Enable the RTC if not already enabled
-+	if (!(au_readl(0xac000028) & 0x20)) {
-+		printk("enabling clock ...\n");
-+		au_writel((au_readl(0xac000028) | 0x20), 0xac000028);
-+	}
-+	// Put the clock in BCD mode
-+	if (readl(0xac00002C) & 0x4) { /* reg B */
-+		au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c);
-+		au_sync();
-+	}
-+#endif
-+}
-diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/init.c linux-2.4.31/arch/mips/jp-embedded/q5/init.c
---- linux-2.4.31.org/arch/mips/jp-embedded/q5/init.c	1969-12-31 19:00:00.000000000 -0500
-+++ linux-2.4.31/arch/mips/jp-embedded/q5/init.c	2005-09-10 16:43:21.000000000 -0400
-@@ -0,0 +1,80 @@
-+/*
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ *	jp-embedded Q5 board setup.
-+ *
-+ * Author: jp@jp-embedded.com
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/sched.h>
-+#include <linux/bootmem.h>
-+#include <asm/addrspace.h>
-+#include <asm/bootinfo.h>
-+#include <linux/string.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+
-+int prom_argc;
-+char **prom_argv, **prom_envp;
-+extern void  __init prom_init_cmdline(void);
-+extern char *prom_getenv(char *envname);
-+void (*__wbflush) (void);
-+
-+void au1500_wbflush(void)
-+{
-+	__asm__ volatile ("sync");
-+}
-+
-+const char *get_system_type(void)
-+{
-+	return "jp-embedded Q5";
-+}
-+
-+int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
-+{
-+	unsigned char *memsize_str;
-+	unsigned long memsize;
-+
-+	prom_argc = argc;
-+	prom_argv = argv;
-+	prom_envp = envp;
-+
-+	__wbflush = au1500_wbflush;
-+
-+        /* obs */
-+	mips_machgroup = MACH_GROUP_ALCHEMY;
-+	mips_machtype = MACH_PB1500;
-+
-+	prom_init_cmdline();
-+	memsize_str = prom_getenv("memsize");
-+	if (!memsize_str) {
-+		memsize = 0x04000000;
-+	} else {
-+		memsize = simple_strtol(memsize_str, NULL, 0);
-+	}
-+	add_memory_region(0, memsize, BOOT_MEM_RAM);
-+	return 0;
-+}
-+
-+EXPORT_SYMBOL(__wbflush);
-diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/irqmap.c linux-2.4.31/arch/mips/jp-embedded/q5/irqmap.c
---- linux-2.4.31.org/arch/mips/jp-embedded/q5/irqmap.c	1969-12-31 19:00:00.000000000 -0500
-+++ linux-2.4.31/arch/mips/jp-embedded/q5/irqmap.c	2005-09-10 16:45:18.000000000 -0400
-@@ -0,0 +1,61 @@
-+/*
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ *	jp-embedded Q5 board setup.
-+ *
-+ * Author: jp@jp-embedded.com
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/module.h>
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/timex.h>
-+#include <linux/slab.h>
-+#include <linux/random.h>
-+#include <linux/delay.h>
-+
-+#include <asm/bitops.h>
-+#include <asm/bootinfo.h>
-+#include <asm/io.h>
-+#include <asm/mipsregs.h>
-+#include <asm/system.h>
-+#include <asm/au1000.h>
-+
-+au1xxx_irq_map_t au1xxx_irq_map[] = {
-+	{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
-+	{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
-+	{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
-+	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
-+	{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
-+	{ AU1500_GPIO_206, INTC_INT_FALL_EDGE, 0 },
-+	{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
-+};
-+
-+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
-+
---- linux-2.4.31.org/Documentation/Configure.help	2005-04-03 21:42:19.000000000 -0400
-+++ linux-2.4.31/Documentation/Configure.help	2005-09-10 18:50:14.340000000 -0400
-@@ -2197,6 +2197,12 @@
-   MIPS-32-based Baget embedded system.  This chipset is better known
-   via the NE2100 cards.
- 
-+jp-embedded Q5 support
-+CONFIG_MIPS_Q5
-+  This enables support for jp-embedded's MIPS based boards. The
-+  boards uses the AU1500 cpu. For more information about these
-+  boards, see <http://www.jp-embedded.com/>.
-+
- Support for DECstations
- CONFIG_DECSTATION
-   This enables support for DEC's MIPS based workstations.  For details