Add BSP for AP7200

62 files changed, 7687 insertions, 0 deletions

diff --git a/target/device/Atmel/atstk1005/Makefile.in b/target/device/Atmel/atstk1005/Makefile.in
new file mode 100644
index 000000000..fcf78c079
--- /dev/null
+++ b/target/device/Atmel/atstk1005/Makefile.in
@@ -0,0 +1,7 @@
+ifeq ($(strip $(BR2_TARGET_AVR32_ATSTK1002)),y)
+ATSTK1002_PATH=target/device/Atmel/atstk100x
+
+TARGET_SKELETON=$(ATSTK1002_PATH)/target_skeleton
+TARGET_DEVICE_TABLE=$(ATSTK1002_PATH)/device_table.txt
+BR2_PACKAGE_BUSYBOX_CONFIG:=$(BOARD_PATH)/busybox-1.9.1.config
+endif
diff --git a/target/device/Atmel/atstk1005/atstk1005-linux-2.6.27.6.config b/target/device/Atmel/atstk1005/atstk1005-linux-2.6.27.6.config
new file mode 100644
index 000000000..6d9b4ec33
--- /dev/null
+++ b/target/device/Atmel/atstk1005/atstk1005-linux-2.6.27.6.config
@@ -0,0 +1,1523 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27.6
+# Wed Dec 17 19:48:30 2008
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type and features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PORTMUX_GPIO_V2=y
+CONFIG_TIMER_AST=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP720X=y
+CONFIG_CPU_AT32AP7200=y
+CONFIG_BOARD_ATSTK1000=y
+# CONFIG_BOARD_ATNGW100 is not set
+# CONFIG_BOARD_FAVR_32 is not set
+# CONFIG_BOARD_MIMC200 is not set
+# CONFIG_BOARD_ATSTK1002 is not set
+# CONFIG_BOARD_ATSTK1003 is not set
+# CONFIG_BOARD_ATSTK1004 is not set
+CONFIG_BOARD_ATSTK1005=y
+# CONFIG_BOARD_ATSTK1006 is not set
+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
+CONFIG_BOARD_ATSTK1000_J2_LED=y
+CONFIG_BOARD_ATSTK1000_J2_LED8=y
+# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
+CONFIG_BOARD_ATSTK1000_EXTDAC=y
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_OWNERSHIP_TRACE is not set
+# CONFIG_NMI_DEBUGGING is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_PARPORT=y
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
+# CONFIG_PARPORT_1284 is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_UB=y
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=m
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+CONFIG_PATA_AT32=m
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NET_POCKET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+CONFIG_USB_KAWETH=y
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+# CONFIG_PLIP is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=m
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_GPIO=m
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_PRINTER is not set
+# CONFIG_PPDEV is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_BUTTERFLY is not set
+# CONFIG_SPI_LM70_LLP is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_AT32_WDT is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+CONFIG_FB_ATMEL_MPOP=y
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_LTV350QV=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_MTS64 is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_PORTMAN2X4 is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_AT73C213=m
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_AT32_SOC=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=y
+CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=y
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_USS720 is not set
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_EZUSB is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+CONFIG_USB_LCD=y
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_SISUSBVGA=y
+CONFIG_USB_LD=y
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
+# CONFIG_MMC_ATMELMCI_DMA is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=y
+# CONFIG_RTC_DRV_AVR32_AST is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_ATMEL_PDCA=y
+# CONFIG_DW_DMAC is not set
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/target/device/Atmel/atstk1005/atstk1005_defconfig b/target/device/Atmel/atstk1005/atstk1005_defconfig
new file mode 100644
index 000000000..1642f0f5b
--- /dev/null
+++ b/target/device/Atmel/atstk1005/atstk1005_defconfig
@@ -0,0 +1,875 @@
+#
+# Automatically generated make config: don't edit
+# Wed Dec 17 10:34:18 2008
+#
+BR2_HAVE_DOT_CONFIG=y
+BR2_VERSION="0.10.0-svn"
+# BR2_alpha is not set
+# BR2_arm is not set
+# BR2_armeb is not set
+BR2_avr32=y
+# BR2_cris is not set
+# BR2_ia64 is not set
+# BR2_i386 is not set
+# BR2_m68k is not set
+# BR2_mips is not set
+# BR2_mipsel is not set
+# BR2_nios2 is not set
+# BR2_powerpc is not set
+# BR2_s390 is not set
+# BR2_sh is not set
+# BR2_sh64 is not set
+# BR2_sparc is not set
+# BR2_sparc64 is not set
+# BR2_x86_64 is not set
+BR2_ARCH="avr32"
+BR2_ENDIAN="BIG"
+
+#
+# Target options
+#
+
+#
+# Project Options
+#
+BR2_PROJECT="atstk1005"
+BR2_HOSTNAME="ATSTK1005"
+BR2_BANNER="ATNSTK1005 ($(DATE))"
+
+#
+# Preset Devices
+#
+BR2_TARGET_ATMEL=y
+
+#
+# Atmel AVR32 Specific Device Support
+#
+BR2_TARGET_AVR32=y
+# BR2_TARGET_AT32AP7000 is not set
+# BR2_TARGET_AT32AP7001 is not set
+# BR2_TARGET_AT32AP7002 is not set
+BR2_TARGET_AT32AP7200=y
+
+#
+# Development board support
+#
+# BR2_TARGET_AVR32_ATSTK1002 is not set
+BR2_TARGET_AVR32_ATSTK1005=y
+# BR2_TARGET_AVR32_ATNGW100 is not set
+# BR2_TARGET_AVR32_ATNGW100_BASE is not set
+# BR2_TARGET_AVR32_ATNGW100_EXPANDED is not set
+BR2_BOARD_NAME="atstk1005"
+
+#
+# Package support
+#
+
+#
+# Secondary locations
+#
+BR2_TARGET_ATMEL_COPYTO=""
+BR2_BOARD_PATH="target/device/Atmel/$(BR2_BOARD_NAME)"
+# BR2_TARGET_VALKA is not set
+# BR2_TARGET_VALKA_V100SC2 is not set
+
+#
+# Generic Architecture support
+#
+
+#
+# Generic System Support
+#
+# BR2_TARGET_GENERIC_ACCESS_POINT is not set
+# BR2_TARGET_GENERIC_FIREWALL is not set
+# BR2_TARGET_GENERIC_DEV_SYSTEM is not set
+
+#
+# Build options
+#
+BR2_PRIMARY_SITE=""
+BR2_WGET="wget --passive-ftp --retry-connrefused --waitretry=10"
+BR2_SVN_CO="svn co"
+BR2_SVN_UP="svn up"
+BR2_GIT="git clone"
+BR2_ZCAT="zcat"
+BR2_BZCAT="bzcat"
+BR2_TAR_OPTIONS=""
+BR2_DL_DIR="$(BASE_DIR)/dl"
+
+#
+# Mirrors and Download locations
+#
+BR2_SOURCEFORGE_MIRROR="easynews"
+BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
+BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
+BR2_DEBIAN_MIRROR="http://ftp.debian.org"
+
+#
+# Atmel Mirrors
+#
+BR2_ATMEL_MIRROR="ftp://www.at91.com/pub/buildroot/"
+BR2_AT91_PATCH_MIRROR="http://maxim.org.za/AT91RM9200/2.6/"
+BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
+# BR2_FPU_SUFFIX is not set
+BR2_TOPDIR_PREFIX=""
+BR2_TOPDIR_SUFFIX=""
+BR2_ROOTFS_PREFIX="rootfs"
+BR2_ROOTFS_SUFFIX="$(DATE)"
+BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
+BR2_GNU_TARGET_SUFFIX="linux-uclibc"
+BR2_JLEVEL=2
+# BR2_PREFER_IMA is not set
+# BR2_DEPRECATED is not set
+BR2_RECENT=y
+# BR2_CONFIG_CACHE is not set
+# BR2_ENABLE_DEBUG is not set
+BR2_STRIP_strip=y
+# BR2_STRIP_sstrip is not set
+# BR2_STRIP_none is not set
+# BR2_OPTIMIZE_0 is not set
+# BR2_OPTIMIZE_1 is not set
+# BR2_OPTIMIZE_2 is not set
+# BR2_OPTIMIZE_3 is not set
+BR2_OPTIMIZE_S=y
+# BR2_PREFER_STATIC_LIB is not set
+# BR2_HAVE_MANPAGES is not set
+# BR2_HAVE_INFOPAGES is not set
+# BR2_HAVE_DOCUMENTATION is not set
+# BR2_HAVE_DEVFILES is not set
+BR2_UPDATE_CONFIG=y
+
+#
+# Toolchain
+#
+# BR2_TOOLCHAIN_BUILDROOT is not set
+# BR2_TOOLCHAIN_EXTERNAL is not set
+BR2_TOOLCHAIN_EXTERNAL_SOURCE=y
+BR2_TOOLCHAIN_SOURCE=y
+# BR2_TOOLCHAIN_ATMEL_AVR32_4_1_2 is not set
+# BR2_TOOLCHAIN_ATMEL_AVR32_4_2_1 is not set
+# BR2_TOOLCHAIN_ATMEL_AVR32_4_2_2 is not set
+BR2_TOOLCHAIN_ATMEL_AVR32_4_2_2_REV_2=y
+# BR2_TOOLCHAIN_ATMEL_AVR32_4_2_3 is not set
+# BR2_TOOLCHAIN_UNKNOWNVENDOR is not set
+BR2_TOOLCHAIN_ATMEL_AVR32=y
+BR2_VENDOR_SITE="$(BR2_ATMEL_MIRROR)"
+BR2_VENDOR_SUFFIX="-avr32"
+BR2_VENDOR_BINUTILS_RELEASE="-1.0.1"
+BR2_VENDOR_GCC_RELEASE="-1.1.3"
+BR2_VENDOR_UCLIBC_RELEASE="-2.1.5"
+BR2_VENDOR_GDB_RELEASE="-2.1.5"
+BR2_VENDOR_PATCH_DIR="Atmel/avr32"
+# BR2_EXT_GCC_VERSION_4_1_2 is not set
+# BR2_EXT_GCC_VERSION_4_2_1 is not set
+BR2_EXT_GCC_VERSION_4_2_2=y
+# BR2_EXT_GCC_VERSION_4_2_3 is not set
+# BR2_EXT_BINUTILS_VERSION_2_17 is not set
+BR2_EXT_BINUTILS_VERSION_2_18=y
+# BR2_EXT_UCLIBC_VERSION_0_9_28_3 is not set
+BR2_EXT_UCLIBC_VERSION_0_9_29=y
+# BR2_EXT_UCLIBC_VERSION_0_9_30 is not set
+
+#
+# Kernel Header Options
+#
+# BR2_KERNEL_HEADERS_2_4_31 is not set
+# BR2_KERNEL_HEADERS_2_6_20_4 is not set
+# BR2_KERNEL_HEADERS_2_6_20 is not set
+# BR2_KERNEL_HEADERS_2_6_21_5 is not set
+# BR2_KERNEL_HEADERS_2_6_21 is not set
+# BR2_KERNEL_HEADERS_2_6_22_1 is not set
+# BR2_KERNEL_HEADERS_2_6_22_10 is not set
+# BR2_KERNEL_HEADERS_2_6_22 is not set
+# BR2_KERNEL_HEADERS_2_6_23 is not set
+# BR2_KERNEL_HEADERS_2_6_24 is not set
+# BR2_KERNEL_HEADERS_2_6_25 is not set
+# BR2_KERNEL_HEADERS_2_6_26 is not set
+BR2_KERNEL_HEADERS_2_6_27=y
+# BR2_KERNEL_HEADERS_SNAP is not set
+BR2_DEFAULT_KERNEL_HEADERS="2.6.27.8"
+
+#
+# uClibc Options
+#
+# BR2_UCLIBC_VERSION_0_9_28_3 is not set
+BR2_UCLIBC_VERSION_0_9_29=y
+# BR2_UCLIBC_VERSION_0_9_30 is not set
+# BR2_UCLIBC_VERSION_SNAPSHOT is not set
+BR2_UCLIBC_CONFIG="target/device/Atmel/uClibc.config.avr32"
+BR2_ENABLE_LOCALE=y
+# BR2_PTHREADS_NONE is not set
+# BR2_PTHREADS is not set
+BR2_PTHREADS_OLD=y
+# BR2_PTHREADS_NATIVE is not set
+# BR2_PTHREAD_DEBUG is not set
+# BR2_UCLIBC_PROGRAM_INVOCATION is not set
+# BR2_UCLIBC_INSTALL_TEST_SUITE is not set
+
+#
+# Binutils Options
+#
+# BR2_BINUTILS_VERSION_2_17 is not set
+# BR2_BINUTILS_VERSION_2_17_50_0_17 is not set
+BR2_BINUTILS_VERSION_2_18=y
+# BR2_BINUTILS_VERSION_2_18_50_0_1 is not set
+# BR2_BINUTILS_VERSION_2_18_50_0_3 is not set
+# BR2_BINUTILS_VERSION_2_18_50_0_6 is not set
+# BR2_BINUTILS_VERSION_2_18_50_0_8 is not set
+# BR2_BINUTILS_VERSION_2_18_50_0_9 is not set
+# BR2_BINUTILS_VERSION_2_19 is not set
+BR2_BINUTILS_VERSION="2.18"
+BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
+
+#
+# GCC Options
+#
+# BR2_GCC_VERSION_3_4_6 is not set
+# BR2_GCC_VERSION_4_0_4 is not set
+# BR2_GCC_VERSION_4_1_2 is not set
+# BR2_GCC_VERSION_4_2_1 is not set
+BR2_GCC_VERSION_4_2_2=y
+# BR2_GCC_VERSION_4_2_3 is not set
+# BR2_GCC_VERSION_4_2_4 is not set
+# BR2_GCC_VERSION_4_3_1 is not set
+BR2_GCC_SUPPORTS_SYSROOT=y
+# BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE is not set
+BR2_GCC_VERSION="4.2.2"
+BR2_TOOLCHAIN_SYSROOT=y
+# BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
+BR2_EXTRA_GCC_CONFIG_OPTIONS=""
+BR2_GCC_CROSS_CXX=y
+BR2_INSTALL_LIBSTDCPP=y
+BR2_GCC_SHARED_LIBGCC=y
+
+#
+# Ccache Options
+#
+# BR2_CCACHE is not set
+
+#
+# Gdb Options
+#
+# BR2_PACKAGE_GDB is not set
+BR2_PACKAGE_GDB_SERVER=y
+BR2_PACKAGE_GDB_HOST=y
+# BR2_GDB_VERSION_6_2_1 is not set
+# BR2_GDB_VERSION_6_3 is not set
+# BR2_GDB_VERSION_6_4 is not set
+# BR2_GDB_VERSION_6_5 is not set
+# BR2_GDB_VERSION_6_6 is not set
+BR2_GDB_VERSION_6_7_1=y
+# BR2_GDB_VERSION_6_8 is not set
+# BR2_GDB_VERSION_SNAPSHOT is not set
+BR2_GDB_VERSION="6.7.1"
+
+#
+# Common Toolchain Options
+#
+# BR2_MKLIBS is not set
+# BR2_PACKAGE_SSTRIP_TARGET is not set
+# BR2_PACKAGE_SSTRIP_HOST is not set
+# BR2_ENABLE_MULTILIB is not set
+BR2_LARGEFILE=y
+BR2_INET_IPV6=y
+BR2_INET_RPC=y
+BR2_USE_WCHAR=y
+BR2_SOFT_FLOAT=y
+BR2_TARGET_OPTIMIZATION="-Os -pipe"
+BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y
+
+#
+# Package Selection for the target
+#
+BR2_PACKAGE_BUSYBOX=y
+# BR2_BUSYBOX_VERSION_1_2_2_1 is not set
+# BR2_BUSYBOX_VERSION_1_6_1 is not set
+# BR2_BUSYBOX_VERSION_1_7_X is not set
+# BR2_BUSYBOX_VERSION_1_8_X is not set
+# BR2_BUSYBOX_VERSION_1_9_X is not set
+# BR2_BUSYBOX_VERSION_1_10_X is not set
+# BR2_BUSYBOX_VERSION_1_11_X is not set
+# BR2_BUSYBOX_VERSION_1_12_X is not set
+BR2_BUSYBOX_VERSION_1_13_X=y
+# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
+BR2_BUSYBOX_VERSION="1.13.1"
+BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
+BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.6.0.config"
+BR2_PACKAGE_BUSYBOX_HIDE_OTHERS=y
+BR2_PACKAGE_BUSYBOX_SKELETON=y
+
+#
+# The minimum needed to build a uClibc development system
+#
+# BR2_PACKAGE_FLEX is not set
+# BR2_PACKAGE_GCC_TARGET is not set
+# BR2_PACKAGE_MAKE is not set
+
+#
+# Other development stuff
+#
+# BR2_PACKAGE_AUTOCONF is not set
+# BR2_PACKAGE_AUTOMAKE is not set
+# BR2_PACKAGE_BISON is not set
+# BR2_PACKAGE_CCACHE_TARGET is not set
+# BR2_PACKAGE_CVS is not set
+# BR2_PACKAGE_DISTCC is not set
+# BR2_PACKAGE_DMALLOC is not set
+# BR2_PACKAGE_FAKEROOT is not set
+BR2_HOST_FAKEROOT=y
+BR2_PACKAGE_GETTEXT=y
+BR2_PACKAGE_LIBINTL=y
+# BR2_PACKAGE_LIBGMP is not set
+# BR2_PACKAGE_GPERF is not set
+# BR2_PACKAGE_LIBMPFR is not set
+# BR2_PACKAGE_LIBTOOL is not set
+# BR2_PACKAGE_M4 is not set
+# BR2_PACKAGE_OPROFILE is not set
+BR2_PACKAGE_PKGCONFIG=y
+# BR2_READLINE is not set
+# BR2_PACKAGE_PCRE is not set
+
+#
+# Other stuff
+#
+# BR2_PACKAGE_AT is not set
+# BR2_PACKAGE_BEECRYPT is not set
+# BR2_PACKAGE_BERKELEYDB is not set
+# BR2_PACKAGE_BSDIFF is not set
+# BR2_PACKAGE_CUPS is not set
+# BR2_PACKAGE_CUSTOMIZE is not set
+# BR2_PACKAGE_FILE is not set
+# BR2_PACKAGE_GAMIN is not set
+# BR2_PACKAGE_ICU is not set
+# BR2_PACKAGE_KEXEC is not set
+# BR2_PACKAGE_LIBCONFIG is not set
+# BR2_PACKAGE_LIBCONFUSE is not set
+BR2_PACKAGE_LIBDAEMON=y
+# BR2_PACKAGE_LIBELF is not set
+# BR2_PACKAGE_LIBEVENT is not set
+# BR2_PACKAGE_LIBFLOAT is not set
+# BR2_PACKAGE_LIBGCRYPT is not set
+# BR2_PACKAGE_LIBGPG_ERROR is not set
+BR2_PACKAGE_LIBICONV=y
+# BR2_PACKAGE_LIBLOCKFILE is not set
+# BR2_PACKAGE_LIBOIL is not set
+# BR2_PACKAGE_LIBSYSFS is not set
+# BR2_PACKAGE_LOCKFILE_PROGS is not set
+# BR2_PACKAGE_LOGROTATE is not set
+# BR2_PACKAGE_LSOF is not set
+# BR2_PACKAGE_LTP-TESTSUITE is not set
+# BR2_PACKAGE_LTRACE is not set
+# BR2_PACKAGE_LTT is not set
+# BR2_PACKAGE_MEMSTAT is not set
+# BR2_PACKAGE_NG_SPICE_REWORK is not set
+# BR2_PACKAGE_POPT is not set
+# BR2_PACKAGE_SCREEN is not set
+# BR2_PACKAGE_STARTUP_NOTIFICATION is not set
+BR2_PACKAGE_STRACE=y
+# BR2_PACKAGE_SUDO is not set
+
+#
+# Database
+#
+# BR2_PACKAGE_MYSQL_CLIENT is not set
+# BR2_PACKAGE_SQLITE is not set
+
+#
+# Networking
+#
+
+#
+# Networking applications
+#
+# BR2_PACKAGE_ARGUS is not set
+BR2_PACKAGE_AVAHI=y
+BR2_PACKAGE_AVAHI_AUTOIPD=y
+# BR2_PACKAGE_AVAHI_DAEMON is not set
+# BR2_PACKAGE_AXEL is not set
+# BR2_PACKAGE_BIND is not set
+BR2_PACKAGE_BRIDGE=y
+# BR2_PACKAGE_CURL is not set
+# BR2_PACKAGE_LIBCURL is not set
+BR2_PACKAGE_DNSMASQ=y
+BR2_PACKAGE_DNSMASQ_TFTP=y
+BR2_PACKAGE_DROPBEAR=y
+# BR2_PACKAGE_ETHTOOL is not set
+BR2_PACKAGE_HASERL=y
+# BR2_PACKAGE_HASERL_VERSION_0_8_X is not set
+BR2_PACKAGE_HASERL_VERSION_0_9_X=y
+BR2_PACKAGE_HASERL_VERSION="0.9.24"
+# BR2_PACKAGE_IFPLUGD is not set
+# BR2_PACKAGE_IRDA_UTILS is not set
+# BR2_PACKAGE_IPERF is not set
+# BR2_PACKAGE_IPROUTE2 is not set
+
+#
+# ipsec-tools	- disabled (requires openssl, flex and the flex library (libfl.a) )
+#
+BR2_PACKAGE_IPTABLES=y
+# BR2_PACKAGE_KISMET is not set
+# BR2_PACKAGE_L2TP is not set
+# BR2_PACKAGE_LIBCGI is not set
+# BR2_PACKAGE_LIBCGICC is not set
+# BR2_PACKAGE_LIBEXOSIP2 is not set
+# BR2_PACKAGE_LIBOSIP2 is not set
+# BR2_PACKAGE_LIBPCAP is not set
+BR2_PACKAGE_LIBUPNP=y
+# BR2_PACKAGE_LINKS is not set
+BR2_PACKAGE_LRZSZ=y
+# BR2_PACKAGE_MDNSRESPONDER is not set
+BR2_PACKAGE_MICROCOM=y
+# BR2_PACKAGE_MIIDIAG is not set
+# BR2_PACKAGE_MROUTED is not set
+# BR2_PACKAGE_MUTT is not set
+BR2_PACKAGE_NBD=y
+BR2_PACKAGE_NCFTP=y
+
+#
+# ncFTP tools selection
+#
+# BR2_PACKAGE_NCFTP_GET is not set
+# BR2_PACKAGE_NCFTP_PUT is not set
+# BR2_PACKAGE_NCFTP_LS is not set
+# BR2_PACKAGE_NCFTP_BATCH is not set
+# BR2_PACKAGE_NCFTP_SPOOLER is not set
+# BR2_PACKAGE_NCFTP_BOOKMARKS is not set
+# BR2_PACKAGE_NEON is not set
+# BR2_PACKAGE_NETKITBASE is not set
+# BR2_PACKAGE_NETKITTELNET is not set
+# BR2_PACKAGE_NETPLUG is not set
+# BR2_PACKAGE_NETSNMP is not set
+# BR2_PACKAGE_NFS_UTILS is not set
+BR2_PACKAGE_NTP=y
+# BR2_PACKAGE_NTP_SNTP is not set
+# BR2_PACKAGE_OLSR is not set
+# BR2_PACKAGE_OPENNTPD is not set
+# BR2_PACKAGE_OPENSSH is not set
+# BR2_PACKAGE_OPENSSL is not set
+# BR2_PACKAGE_OPENVPN is not set
+# BR2_PACKAGE_OPENSWAN is not set
+BR2_PACKAGE_PORTMAP=y
+# BR2_PACKAGE_PPPD is not set
+# BR2_PACKAGE_RP_PPPOE is not set
+# BR2_PACKAGE_PPTP_LINUX is not set
+BR2_PACKAGE_PROFTPD=y
+
+#
+# quagga suite
+#
+# BR2_PACKAGE_QUAGGA_ZEBRA is not set
+# BR2_PACKAGE_QUAGGA_BGPD is not set
+# BR2_PACKAGE_QUAGGA_RIPD is not set
+# BR2_PACKAGE_QUAGGA_RIPNGD is not set
+# BR2_PACKAGE_QUAGGA_OSPFD is not set
+# BR2_PACKAGE_QUAGGA_OSPF6D is not set
+# BR2_PACKAGE_QUAGGA_WATCHQUAGGA is not set
+# BR2_PACKAGE_QUAGGA_ISISD is not set
+BR2_PACKAGE_RSYNC=y
+BR2_PACKAGE_SAMBA=y
+
+#
+# Samba tools selection
+#
+# BR2_PACKAGE_SAMBA_CIFS is not set
+# BR2_PACKAGE_SAMBA_EVENTLOGADM is not set
+
+#
+# findsmb       - disabled (requires nmblookup, smbclient and perl)
+#
+# BR2_PACKAGE_SAMBA_NET is not set
+BR2_PACKAGE_SAMBA_NMBD=y
+# BR2_PACKAGE_SAMBA_NMBLOOKUP is not set
+# BR2_PACKAGE_SAMBA_NTLM_AUTH is not set
+# BR2_PACKAGE_SAMBA_PDBEDIT is not set
+# BR2_PACKAGE_SAMBA_PROFILES is not set
+# BR2_PACKAGE_SAMBA_RPCCLIENT is not set
+# BR2_PACKAGE_SAMBA_SMBCACLS is not set
+# BR2_PACKAGE_SAMBA_SMBCLIENT is not set
+# BR2_PACKAGE_SAMBA_SMBCONTROL is not set
+# BR2_PACKAGE_SAMBA_SMBCQUOTAS is not set
+# BR2_PACKAGE_SAMBA_SMBGET is not set
+BR2_PACKAGE_SAMBA_SMBPASSWD=y
+# BR2_PACKAGE_SAMBA_SMBSPOOL is not set
+# BR2_PACKAGE_SAMBA_SMBSTATUS is not set
+# BR2_PACKAGE_SAMBA_SMBTREE is not set
+BR2_PACKAGE_SAMBA_SWAT=y
+
+#
+# smbtar        - disabled (requires smbclient)
+#
+# BR2_PACKAGE_SAMBA_TDB is not set
+# BR2_PACKAGE_SAMBA_TESTPARM is not set
+# BR2_PACKAGE_SAMBA_WINBINDD is not set
+# BR2_PACKAGE_SOCAT is not set
+# BR2_PACKAGE_STUNNEL is not set
+# BR2_PACKAGE_TCPDUMP is not set
+# BR2_PACKAGE_DHCPDUMP is not set
+# BR2_PACKAGE_TFTPD is not set
+# BR2_PACKAGE_TN5250 is not set
+# BR2_PACKAGE_TTCP is not set
+# BR2_PACKAGE_UDPCAST is not set
+# BR2_PACKAGE_VPNC is not set
+# BR2_PACKAGE_VSFTPD is not set
+# BR2_PACKAGE_VTUN is not set
+# BR2_PACKAGE_WEBIF is not set
+BR2_PACKAGE_WIRELESS_TOOLS=y
+
+#
+# Hardware handling / blockdevices and filesystem maintenance
+#
+
+#
+# dbus not available (need expat or libxml2)
+#
+# BR2_PACKAGE_DEVMEM2 is not set
+# BR2_PACKAGE_DM is not set
+# BR2_PACKAGE_DMRAID is not set
+# BR2_PACKAGE_E2FSPROGS is not set
+# BR2_PACKAGE_EEPROG is not set
+# BR2_PACKAGE_FCONFIG is not set
+# BR2_PACKAGE_FIS is not set
+# BR2_PACKAGE_LIBFUSE is not set
+# BR2_PACKAGE_GADGETFS_TEST is not set
+# BR2_PACKAGE_HAL is not set
+# BR2_PACKAGE_HWDATA is not set
+# BR2_PACKAGE_I2C_TOOLS is not set
+# BR2_PACKAGE_INPUT_TOOLS is not set
+# BR2_PACKAGE_IOSTAT is not set
+# BR2_PACKAGE_LIBAIO is not set
+# BR2_PACKAGE_LIBRAW1394 is not set
+# BR2_PACKAGE_LIBUSB is not set
+# BR2_PACKAGE_LM_SENSORS is not set
+# BR2_PACKAGE_LVM2 is not set
+# BR2_PACKAGE_MDADM is not set
+# BR2_PACKAGE_MEMTESTER is not set
+# BR2_PACKAGE_MKDOSFS is not set
+BR2_PACKAGE_MTD=y
+BR2_PACKAGE_MTD_UTILS=y
+# BR2_PACKAGE_MTD_20061007 is not set
+# BR2_PACKAGE_MTD_20050122 is not set
+# BR2_PACKAGE_MTD_UTILS_GIT is not set
+
+#
+# MTD tools selection
+#
+# BR2_PACKAGE_MTD_DOCFDISK is not set
+# BR2_PACKAGE_MTD_DOC_LOADBIOS is not set
+BR2_PACKAGE_MTD_FLASHCP=y
+BR2_PACKAGE_MTD_FLASH_ERASE=y
+BR2_PACKAGE_MTD_FLASH_ERASEALL=y
+BR2_PACKAGE_MTD_FLASH_INFO=y
+# BR2_PACKAGE_MTD_FLASH_LOCK is not set
+# BR2_PACKAGE_MTD_FLASH_UNLOCK is not set
+# BR2_PACKAGE_MTD_FTL_CHECK is not set
+# BR2_PACKAGE_MTD_FTL_FORMAT is not set
+# BR2_PACKAGE_MTD_JFFS2DUMP is not set
+# BR2_PACKAGE_MTD_MKFSJFFS2 is not set
+# BR2_PACKAGE_MTD_MKFSJFFS is not set
+BR2_PACKAGE_MTD_MTD_DEBUG=y
+# BR2_PACKAGE_MTD_NANDDUMP is not set
+# BR2_PACKAGE_MTD_NANDWRITE is not set
+# BR2_PACKAGE_MTD_NFTL_FORMAT is not set
+# BR2_PACKAGE_MTD_NFTLDUMP is not set
+# BR2_PACKAGE_MTD_SUMTOOL is not set
+# BR2_PACKAGE_NTFS-3G is not set
+# BR2_PACKAGE_PCIUTILS is not set
+# BR2_PACKAGE_PCMCIA is not set
+# BR2_PACKAGE_RAIDTOOLS is not set
+# BR2_PACKAGE_SETSERIAL is not set
+# BR2_PACKAGE_SMARTMONTOOLS is not set
+# BR2_PACKAGE_USBMOUNT is not set
+# BR2_PACKAGE_USBUTILS is not set
+# BR2_PACKAGE_WIPE is not set
+# BR2_PACKAGE_XFSPROGS is not set
+
+#
+# Audio and video libraries and applications
+#
+# BR2_PACKAGE_ALSA_LIB is not set
+
+#
+# asterisk	- disabled (required openssl and mpg123)
+#
+# BR2_PACKAGE_AUMIX is not set
+# BR2_PACKAGE_GSTREAMER is not set
+# BR2_PACKAGE_LIBID3TAG is not set
+# BR2_PACKAGE_LIBMAD is not set
+# BR2_PACKAGE_LIBOGG is not set
+# BR2_PACKAGE_LIBSNDFILE is not set
+# BR2_PACKAGE_LIBTHEORA is not set
+
+#
+# libvorbis requires the package libogg to build
+#
+# BR2_PACKAGE_MADPLAY is not set
+# BR2_PACKAGE_MPG123 is not set
+# BR2_PACKAGE_MPLAYER is not set
+# BR2_PACKAGE_SPEEX is not set
+# BR2_PACKAGE_FESTIVAL is not set
+# BR2_PACKAGE_VLC is not set
+
+#
+# Graphic libraries and applications (graphic/text)
+#
+
+#
+# text rendering libraries
+#
+BR2_PACKAGE_NCURSES=y
+# BR2_PACKAGE_NCURSES_TARGET_PANEL is not set
+# BR2_PACKAGE_NCURSES_TARGET_FORM is not set
+# BR2_PACKAGE_NCURSES_TARGET_MENU is not set
+# BR2_PACKAGE_NCURSES_TARGET_HEADERS is not set
+# BR2_PACKAGE_NEWT is not set
+# BR2_PACKAGE_SLANG is not set
+
+#
+# text rendering applications
+#
+# BR2_PACKAGE_DIALOG is not set
+
+#
+# graphic libraries
+#
+# BR2_PACKAGE_DIRECTFB is not set
+# BR2_PACKAGE_FBDUMP is not set
+# BR2_PACKAGE_IMAGEMAGICK is not set
+# BR2_PACKAGE_JPEG is not set
+# BR2_PACKAGE_LIBART is not set
+# BR2_PACKAGE_LIBPNG is not set
+# BR2_PACKAGE_LIBUNGIF is not set
+# BR2_PACKAGE_PIXMAN is not set
+# BR2_PACKAGE_SDL is not set
+# BR2_PACKAGE_TIFF is not set
+
+#
+# busybox graphic applications
+#
+
+#
+# --> May be broken in busybox
+#
+# BR2_PACKAGE_FBV is not set
+# BR2_PACKAGE_FBSET is not set
+
+#
+# other GUIs
+#
+# BR2_PACKAGE_QTOPIA4 is not set
+
+#
+# X Window System server
+#
+BR2_PACKAGE_XSERVER_none=y
+# BR2_PACKAGE_XSERVER_xorg is not set
+# BR2_PACKAGE_XSERVER_tinyx is not set
+BR2_X11_PREFIX="/usr"
+
+#
+# X libraries and helper libraries
+#
+# BR2_PACKAGE_ATK is not set
+# BR2_PACKAGE_PANGO is not set
+# BR2_PACKAGE_LIBDRM is not set
+# BR2_PACKAGE_LIBERATION is not set
+# BR2_PACKAGE_LIBGLIB12 is not set
+BR2_PACKAGE_LIBGLIB2=y
+# BR2_PACKAGE_OPENMOTIF is not set
+# BR2_PACKAGE_FONTCONFIG is not set
+# BR2_PACKAGE_FREETYPE is not set
+# BR2_PACKAGE_TSLIB is not set
+# BR2_PACKAGE_WEBKIT is not set
+
+#
+# X Window managers
+#
+# BR2_PACKAGE_MATCHBOX is not set
+
+#
+# X applications
+#
+# BR2_PACKAGE_ALSAMIXERGUI is not set
+
+#
+# dillo		- disabled (requires jpeg,libglib12,libgtk12,zlib,libpng and Xorg(7))
+#
+# BR2_PACKAGE_GQVIEW is not set
+# BR2_PACKAGE_LEAFPAD is not set
+
+#
+# midori		- disabled (requires Xorg(7))
+#
+# BR2_PACKAGE_PCMANFM is not set
+# BR2_PACKAGE_SYLPHEED is not set
+# BR2_PACKAGE_TORSMO is not set
+# BR2_PACKAGE_X11VNC is not set
+# BR2_PACKAGE_XPDF is not set
+# BR2_PACKAGE_XSTROKE is not set
+# BR2_PACKAGE_XVKBD is not set
+
+#
+# Compressors / decompressors
+#
+BR2_PACKAGE_LZO=y
+# BR2_PACKAGE_LZMA_TARGET is not set
+# BR2_PACKAGE_LZMA_HOST is not set
+BR2_PACKAGE_ZLIB=y
+# BR2_PACKAGE_ZLIB_TARGET_HEADERS is not set
+
+#
+# Package managers
+#
+# BR2_PACKAGE_IPKG is not set
+# BR2_PACKAGE_PORTAGE is not set
+
+#
+# Interpreter languages / Scripting
+#
+# BR2_PACKAGE_LUA is not set
+# BR2_PACKAGE_MICROPERL is not set
+# BR2_PACKAGE_PYTHON is not set
+# BR2_PACKAGE_RUBY is not set
+# BR2_PACKAGE_TCL is not set
+# BR2_PACKAGE_PHP is not set
+
+#
+# XML handling
+#
+# BR2_PACKAGE_EXPAT is not set
+# BR2_PACKAGE_EZXML is not set
+# BR2_PACKAGE_LIBXML2 is not set
+# BR2_PACKAGE_LIBXSLT is not set
+# BR2_PACKAGE_XERCES is not set
+
+#
+# Java
+#
+# BR2_PACKAGE_CLASSPATH is not set
+
+#
+# Games
+#
+# BR2_PACKAGE_GNUCHESS is not set
+# BR2_PACKAGE_MAGICCUBE4D is not set
+# BR2_PACKAGE_PRBOOM is not set
+# BR2_PACKAGE_RUBIX is not set
+# BR2_PACKAGE_VICE is not set
+# BR2_PACKAGE_XBOARD is not set
+
+#
+# Target filesystem options
+#
+
+#
+# filesystem for target device
+#
+# BR2_TARGET_ROOTFS_CRAMFS is not set
+# BR2_TARGET_ROOTFS_CLOOP is not set
+# BR2_TARGET_ROOTFS_EXT2 is not set
+BR2_TARGET_ROOTFS_JFFS2=y
+# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056 is not set
+# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528 is not set
+BR2_TARGET_ROOTFS_JFFS2_FLASH_128=y
+# BR2_TARGET_ROOTFS_JFFS2_FLASH_64 is not set
+# BR2_TARGET_ROOTFS_JFFS2_CUSTOM is not set
+BR2_TARGET_ROOTFS_JFFS2_PAGESIZE=0x1000
+BR2_TARGET_ROOTFS_JFFS2_EBSIZE=0x20000
+BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER=y
+# BR2_JFFS2_TARGET_SREC is not set
+# BR2_TARGET_ROOTFS_JFFS2_PAD is not set
+# BR2_TARGET_ROOTFS_JFFS2_LE is not set
+BR2_TARGET_ROOTFS_JFFS2_BE=y
+# BR2_TARGET_ROOTFS_JFFS2_SQUASH is not set
+# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
+BR2_TARGET_ROOTFS_JFFS2_OUTPUT="$(IMAGE).jffs2"
+BR2_TARGET_ROOTFS_JFFS2_COPYTO="/tftpboot"
+# BR2_TARGET_ROOTFS_UBIFS is not set
+# BR2_TARGET_ROOTFS_SQUASHFS is not set
+BR2_TARGET_ROOTFS_TAR=y
+BR2_TARGET_ROOTFS_TAR_NONE=y
+# BR2_TARGET_ROOTFS_TAR_GZIP is not set
+# BR2_TARGET_ROOTFS_TAR_BZIP2 is not set
+# BR2_TARGET_ROOTFS_TAR_LZMA is not set
+BR2_TARGET_ROOTFS_TAR_OPTIONS=""
+BR2_TARGET_ROOTFS_TAR_COPYTO=""
+# BR2_TARGET_ROOTFS_CPIO is not set
+# BR2_TARGET_ROOTFS_INITRAMFS is not set
+# BR2_TARGET_ROOTFS_ROMFS is not set
+
+#
+# bootloader for target device
+#
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="atngw100"
+BR2_TARGET_UBOOT_CUSTOM_PATCH=""
+BR2_TARGET_UBOOT_SERVERIP="10.175.196.221"
+BR2_TARGET_UBOOT_IPADDR="10.175.196.18"
+BR2_TARGET_UBOOT_GATEWAY="10.175.196.1"
+BR2_TARGET_UBOOT_NETMASK="255.255.255.0"
+BR2_TARGET_UBOOT_ETHADDR="04:25:fe:ed:00:18"
+BR2_TARGET_UBOOT_ETH1ADDR=""
+# BR2_TARGET_UBOOT_SILENT is not set
+# BR2_TARGET_UBOOT_TOOL_MKIMAGE is not set
+# BR2_TARGET_UBOOT_TOOL_ENV is not set
+
+#
+# Kernel
+#
+# BR2_KERNEL_none is not set
+BR2_KERNEL_LINUX_ADVANCED=y
+# BR2_KERNEL_LINUX is not set
+# BR2_KERNEL_HURD is not set
+BR2_PACKAGE_LINUX=y
+BR2_PACKAGE_LINUX_KCONFIG="$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-2.6.24.config"
+BR2_PACKAGE_LINUX_FORMAT="uImage"
+BR2_KERNEL_CURRENT_VERSION="2.6.27.7"
+BR2_KERNEL_SITE="http://ftp.kernel.org/pub/linux/kernel/v2.6/"
+BR2_MM_PATCH_SITE="http://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6"
+BR2_RC_MM_PATCH_DIR="$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)/2.6.$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-mm$(BR2_KERNEL_MM_LEVEL)"
+BR2_LINUX_2_6_STABLE=y
+# BR2_LINUX_2_6_27 is not set
+# BR2_LINUX_2_6_26 is not set
+# BR2_LINUX_2_6_25 is not set
+# BR2_LINUX_2_6_24 is not set
+# BR2_LINUX_2_6_23 is not set
+# BR2_LINUX_2_6_22_10 is not set
+# BR2_LINUX_2_6_22_1 is not set
+# BR2_LINUX_2_6_22 is not set
+# BR2_LINUX_2_6_21_7 is not set
+# BR2_LINUX_2_6_21_5 is not set
+# BR2_LINUX_2_6_21 is not set
+# BR2_LINUX_2_6_20 is not set
+# BR2_LINUX_2_6_28 is not set
+# BR2_LINUX_2_6_29 is not set
+# BR2_LINUX26_CUSTOM is not set
+
+#
+# Patches
+#
+# BR2_KERNEL_ARCH_PATCH_ENABLED is not set
+BR2_LINUX_BSP_PATCH=""
+BR2_DOWNLOAD_LINUX26_VERSION="$(BR2_KERNEL_CURRENT_VERSION)"
+BR2_LINUX26_VERSION="$(BR2_KERNEL_CURRENT_VERSION)"
+
+#
+# Linux Kernel Configuration
+#
+BR2_PACKAGE_LINUX_USE_KCONFIG=y
+# BR2_PACKAGE_LINUX_USE_DEFCONFIG is not set
+# BR2_PACKAGE_LINUX_USE_XCONFIG is not set
+BR2_MAKE_XCONFIG=y
+# BR2_MAKE_MENUCONFIG is not set
+BR2_KERNEL_CONFIG_METHOD="xconfig"
+# BR2_LINUX_BIN_BZIMAGE is not set
+BR2_LINUX_BIN_UIMAGE=y
+# BR2_LINUX_BIN_VMLINUX is not set
+# BR2_LINUX_BIN_ZIMAGE is not set
+# BR2_LINUX_BIN_CUSTOM is not set
+
+#
+# Destinations for linux kernel binaries
+#
+BR2_LINUX_COPYTO_ROOTFS=y
+BR2_LINUX_COPYTO_TFTPBOOT=y
+BR2_LINUX_COPYTO=""
+# BR2_LINUX_COPY_CONFIGURATION is not set
diff --git a/target/device/Atmel/atstk1005/busybox-1.9.1.config b/target/device/Atmel/atstk1005/busybox-1.9.1.config
new file mode 100644
index 000000000..7dd45cd2e
--- /dev/null
+++ b/target/device/Atmel/atstk1005/busybox-1.9.1.config
@@ -0,0 +1,767 @@
+#
+# Automatically generated make config: don't edit
+# Busybox version: 1.8.2
+# Sun Dec 23 12:11:59 2007
+#
+CONFIG_HAVE_DOT_CONFIG=y
+
+#
+# Busybox Settings
+#
+
+#
+# General Configuration
+#
+# CONFIG_NITPICK is not set
+# CONFIG_DESKTOP is not set
+# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
+# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_SHOW_USAGE=y
+CONFIG_FEATURE_VERBOSE_USAGE=y
+# CONFIG_FEATURE_COMPRESS_USAGE is not set
+# CONFIG_FEATURE_INSTALLER is not set
+# CONFIG_LOCALE_SUPPORT is not set
+CONFIG_GETOPT_LONG=y
+CONFIG_FEATURE_DEVPTS=y
+# CONFIG_FEATURE_CLEAN_UP is not set
+# CONFIG_FEATURE_PIDFILE is not set
+CONFIG_FEATURE_SUID=y
+# CONFIG_FEATURE_SUID_CONFIG is not set
+# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set
+# CONFIG_SELINUX is not set
+# CONFIG_FEATURE_PREFER_APPLETS is not set
+CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
+CONFIG_FEATURE_SYSLOG=y
+CONFIG_FEATURE_HAVE_RPC=y
+
+#
+# Build Options
+#
+CONFIG_STATIC=y
+CONFIG_BUILD_LIBBUSYBOX=y
+# CONFIG_FEATURE_INDIVIDUAL is not set
+# CONFIG_FEATURE_SHARED_BUSYBOX is not set
+CONFIG_LFS=y
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_WERROR is not set
+CONFIG_NO_DEBUG_LIB=y
+# CONFIG_DMALLOC is not set
+# CONFIG_EFENCE is not set
+CONFIG_INCLUDE_SUSv2=y
+
+#
+# Installation Options
+#
+# CONFIG_INSTALL_NO_USR is not set
+CONFIG_INSTALL_APPLET_SYMLINKS=y
+# CONFIG_INSTALL_APPLET_HARDLINKS is not set
+# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
+# CONFIG_INSTALL_APPLET_DONT is not set
+# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
+# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
+# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
+CONFIG_PREFIX="/usr/avr32-linux"
+
+#
+# Busybox Library Tuning
+#
+CONFIG_PASSWORD_MINLEN=6
+CONFIG_MD5_SIZE_VS_SPEED=2
+CONFIG_FEATURE_FAST_TOP=y
+# CONFIG_FEATURE_ETC_NETWORKS is not set
+CONFIG_FEATURE_EDITING=y
+CONFIG_FEATURE_EDITING_MAX_LEN=1024
+CONFIG_FEATURE_EDITING_FANCY_KEYS=y
+# CONFIG_FEATURE_EDITING_VI is not set
+CONFIG_FEATURE_EDITING_HISTORY=100
+CONFIG_FEATURE_EDITING_SAVEHISTORY=y
+CONFIG_FEATURE_TAB_COMPLETION=y
+# CONFIG_FEATURE_USERNAME_COMPLETION is not set
+CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
+CONFIG_MONOTONIC_SYSCALL=y
+CONFIG_IOCTL_HEX2STR_ERROR=y
+
+#
+# Applets
+#
+
+#
+# Archival Utilities
+#
+CONFIG_AR=y
+CONFIG_FEATURE_AR_LONG_FILENAMES=y
+CONFIG_BUNZIP2=y
+CONFIG_BZIP2=y
+CONFIG_CPIO=y
+CONFIG_DPKG=y
+CONFIG_DPKG_DEB=y
+# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
+CONFIG_GUNZIP=y
+CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y
+CONFIG_GZIP=y
+CONFIG_RPM2CPIO=y
+CONFIG_RPM=y
+CONFIG_FEATURE_RPM_BZ2=y
+CONFIG_TAR=y
+CONFIG_FEATURE_TAR_CREATE=y
+CONFIG_FEATURE_TAR_BZIP2=y
+CONFIG_FEATURE_TAR_LZMA=y
+CONFIG_FEATURE_TAR_FROM=y
+CONFIG_FEATURE_TAR_GZIP=y
+CONFIG_FEATURE_TAR_COMPRESS=y
+CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
+CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY=y
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+CONFIG_FEATURE_TAR_LONG_OPTIONS=y
+CONFIG_UNCOMPRESS=y
+CONFIG_UNLZMA=y
+CONFIG_FEATURE_LZMA_FAST=y
+CONFIG_UNZIP=y
+
+#
+# Common options for cpio and tar
+#
+# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
+
+#
+# Common options for dpkg and dpkg_deb
+#
+CONFIG_FEATURE_DEB_TAR_GZ=y
+CONFIG_FEATURE_DEB_TAR_BZ2=y
+CONFIG_FEATURE_DEB_TAR_LZMA=y
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+CONFIG_CAL=y
+CONFIG_CAT=y
+CONFIG_CATV=y
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+CONFIG_CHROOT=y
+CONFIG_CKSUM=y
+CONFIG_COMM=y
+CONFIG_CP=y
+CONFIG_CUT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+CONFIG_FEATURE_DD_IBS_OBS=y
+CONFIG_DF=y
+CONFIG_DIRNAME=y
+CONFIG_DOS2UNIX=y
+CONFIG_UNIX2DOS=y
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+CONFIG_FEATURE_ENV_LONG_OPTIONS=y
+CONFIG_EXPAND=y
+CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
+CONFIG_EXPR=y
+CONFIG_EXPR_MATH_SUPPORT_64=y
+CONFIG_FALSE=y
+CONFIG_FOLD=y
+CONFIG_HEAD=y
+CONFIG_FEATURE_FANCY_HEAD=y
+CONFIG_HOSTID=y
+CONFIG_ID=y
+CONFIG_INSTALL=y
+CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
+CONFIG_LENGTH=y
+CONFIG_LN=y
+CONFIG_LOGNAME=y
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=y
+CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
+CONFIG_MD5SUM=y
+CONFIG_MKDIR=y
+CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
+CONFIG_MKFIFO=y
+CONFIG_MKNOD=y
+CONFIG_MV=y
+CONFIG_FEATURE_MV_LONG_OPTIONS=y
+CONFIG_NICE=y
+CONFIG_NOHUP=y
+CONFIG_OD=y
+CONFIG_PRINTENV=y
+CONFIG_PRINTF=y
+CONFIG_PWD=y
+CONFIG_READLINK=y
+CONFIG_FEATURE_READLINK_FOLLOW=y
+CONFIG_REALPATH=y
+CONFIG_RM=y
+CONFIG_RMDIR=y
+CONFIG_SEQ=y
+CONFIG_SHA1SUM=y
+CONFIG_SLEEP=y
+CONFIG_FEATURE_FANCY_SLEEP=y
+CONFIG_SORT=y
+CONFIG_FEATURE_SORT_BIG=y
+CONFIG_SPLIT=y
+CONFIG_FEATURE_SPLIT_FANCY=y
+CONFIG_STAT=y
+CONFIG_FEATURE_STAT_FORMAT=y
+CONFIG_STTY=y
+CONFIG_SUM=y
+CONFIG_SYNC=y
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=y
+CONFIG_TEE=y
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+CONFIG_TEST=y
+CONFIG_FEATURE_TEST_64=y
+CONFIG_TOUCH=y
+CONFIG_TR=y
+CONFIG_FEATURE_TR_CLASSES=y
+CONFIG_FEATURE_TR_EQUIV=y
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+CONFIG_UNEXPAND=y
+CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+CONFIG_UUDECODE=y
+CONFIG_UUENCODE=y
+CONFIG_WC=y
+CONFIG_FEATURE_WC_LARGE=y
+CONFIG_WHO=y
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls, more and telnet
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Common options for md5sum, sha1sum
+#
+CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=y
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+CONFIG_DUMPKMAP=y
+CONFIG_KBD_MODE=y
+CONFIG_LOADFONT=y
+CONFIG_LOADKMAP=y
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+CONFIG_RESIZE=y
+CONFIG_FEATURE_RESIZE_PRINT=y
+CONFIG_SETCONSOLE=y
+CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
+CONFIG_SETKEYCODES=y
+CONFIG_SETLOGCONS=y
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+# CONFIG_PIPE_PROGRESS is not set
+CONFIG_RUN_PARTS=y
+CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
+# CONFIG_FEATURE_RUN_PARTS_FANCY is not set
+CONFIG_START_STOP_DAEMON=y
+CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
+CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
+CONFIG_WHICH=y
+
+#
+# Editors
+#
+CONFIG_AWK=y
+CONFIG_FEATURE_AWK_MATH=y
+CONFIG_CMP=y
+CONFIG_DIFF=y
+CONFIG_FEATURE_DIFF_BINARY=y
+CONFIG_FEATURE_DIFF_DIR=y
+CONFIG_FEATURE_DIFF_MINIMAL=y
+CONFIG_ED=y
+CONFIG_PATCH=y
+CONFIG_SED=y
+CONFIG_VI=y
+CONFIG_FEATURE_VI_MAX_LEN=1024
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+CONFIG_FEATURE_ALLOW_EXEC=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_PRINT0=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_MMIN=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+CONFIG_FEATURE_FIND_MAXDEPTH=y
+CONFIG_FEATURE_FIND_NEWER=y
+CONFIG_FEATURE_FIND_INUM=y
+CONFIG_FEATURE_FIND_EXEC=y
+CONFIG_FEATURE_FIND_USER=y
+CONFIG_FEATURE_FIND_GROUP=y
+CONFIG_FEATURE_FIND_NOT=y
+CONFIG_FEATURE_FIND_DEPTH=y
+CONFIG_FEATURE_FIND_PAREN=y
+CONFIG_FEATURE_FIND_SIZE=y
+CONFIG_FEATURE_FIND_PRUNE=y
+CONFIG_FEATURE_FIND_DELETE=y
+CONFIG_FEATURE_FIND_PATH=y
+CONFIG_FEATURE_FIND_REGEX=y
+# CONFIG_FEATURE_FIND_CONTEXT is not set
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+CONFIG_XARGS=y
+CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
+CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+
+#
+# Init Utilities
+#
+CONFIG_INIT=y
+# CONFIG_DEBUG_INIT is not set
+CONFIG_FEATURE_USE_INITTAB=y
+CONFIG_FEATURE_INIT_SCTTY=y
+CONFIG_FEATURE_INIT_SYSLOG=y
+CONFIG_FEATURE_EXTRA_QUIET=y
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+CONFIG_FEATURE_INITRD=y
+CONFIG_HALT=y
+CONFIG_MESG=y
+
+#
+# Login/Password Management Utilities
+#
+CONFIG_FEATURE_SHADOWPASSWDS=y
+# CONFIG_USE_BB_SHADOW is not set
+# CONFIG_USE_BB_PWD_GRP is not set
+CONFIG_ADDGROUP=y
+CONFIG_FEATURE_ADDUSER_TO_GROUP=y
+CONFIG_DELGROUP=y
+CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
+CONFIG_ADDUSER=y
+CONFIG_DELUSER=y
+CONFIG_GETTY=y
+CONFIG_FEATURE_UTMP=y
+CONFIG_FEATURE_WTMP=y
+CONFIG_LOGIN=y
+# CONFIG_PAM is not set
+CONFIG_LOGIN_SCRIPTS=y
+CONFIG_FEATURE_NOLOGIN=y
+CONFIG_FEATURE_SECURETTY=y
+CONFIG_PASSWD=y
+CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
+# CONFIG_CRYPTPW is not set
+# CONFIG_CHPASSWD is not set
+CONFIG_SU=y
+CONFIG_FEATURE_SU_SYSLOG=y
+CONFIG_FEATURE_SU_CHECKS_SHELLS=y
+CONFIG_SULOGIN=y
+CONFIG_VLOCK=y
+
+#
+# Linux Ext2 FS Progs
+#
+CONFIG_CHATTR=y
+CONFIG_FSCK=y
+CONFIG_LSATTR=y
+
+#
+# Linux Module Utilities
+#
+CONFIG_INSMOD=y
+# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
+# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
+# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
+CONFIG_FEATURE_INSMOD_LOAD_MAP=y
+CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL=y
+CONFIG_RMMOD=y
+CONFIG_LSMOD=y
+CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
+CONFIG_MODPROBE=y
+CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y
+CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y
+
+#
+# Options common to multiple modutils
+#
+CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+# CONFIG_FEATURE_2_4_MODULES is not set
+CONFIG_FEATURE_2_6_MODULES=y
+# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
+
+#
+# Linux System Utilities
+#
+CONFIG_DMESG=y
+CONFIG_FEATURE_DMESG_PRETTY=y
+CONFIG_FBSET=y
+CONFIG_FEATURE_FBSET_FANCY=y
+CONFIG_FEATURE_FBSET_READMODE=y
+CONFIG_FDFLUSH=y
+CONFIG_FDFORMAT=y
+CONFIG_FDISK=y
+CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
+CONFIG_FEATURE_FDISK_WRITABLE=y
+# CONFIG_FEATURE_AIX_LABEL is not set
+# CONFIG_FEATURE_SGI_LABEL is not set
+# CONFIG_FEATURE_SUN_LABEL is not set
+# CONFIG_FEATURE_OSF_LABEL is not set
+# CONFIG_FEATURE_FDISK_ADVANCED is not set
+# CONFIG_FREERAMDISK is not set
+# CONFIG_FSCK_MINIX is not set
+# CONFIG_MKFS_MINIX is not set
+# CONFIG_FEATURE_MINIX2 is not set
+CONFIG_GETOPT=y
+CONFIG_HEXDUMP=y
+CONFIG_HWCLOCK=y
+# CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS is not set
+# CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS is not set
+CONFIG_IPCRM=y
+CONFIG_IPCS=y
+CONFIG_LOSETUP=y
+CONFIG_MDEV=y
+CONFIG_FEATURE_MDEV_CONF=y
+CONFIG_FEATURE_MDEV_EXEC=y
+CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
+CONFIG_MKSWAP=y
+# CONFIG_FEATURE_MKSWAP_V0 is not set
+CONFIG_MORE=y
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_MOUNT=y
+CONFIG_FEATURE_MOUNT_HELPERS=y
+CONFIG_FEATURE_MOUNT_NFS=y
+CONFIG_FEATURE_MOUNT_CIFS=y
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
+CONFIG_PIVOT_ROOT=y
+CONFIG_RDATE=y
+CONFIG_READPROFILE=y
+CONFIG_SETARCH=y
+CONFIG_SWAPONOFF=y
+CONFIG_SWITCH_ROOT=y
+CONFIG_UMOUNT=y
+CONFIG_FEATURE_UMOUNT_ALL=y
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+CONFIG_FEATURE_MTAB_SUPPORT=y
+
+#
+# Miscellaneous Utilities
+#
+# CONFIG_ADJTIMEX is not set
+CONFIG_BBCONFIG=y
+CONFIG_CHRT=y
+CONFIG_CROND=y
+CONFIG_DEBUG_CROND_OPTION=y
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+CONFIG_CRONTAB=y
+CONFIG_DC=y
+# CONFIG_DEVFSD is not set
+# CONFIG_DEVFSD_MODLOAD is not set
+# CONFIG_DEVFSD_FG_NP is not set
+# CONFIG_DEVFSD_VERBOSE is not set
+# CONFIG_FEATURE_DEVFS is not set
+# CONFIG_EJECT is not set
+CONFIG_LAST=y
+CONFIG_LESS=y
+CONFIG_FEATURE_LESS_MAXLINES=9999999
+CONFIG_FEATURE_LESS_BRACKETS=y
+CONFIG_FEATURE_LESS_FLAGS=y
+CONFIG_FEATURE_LESS_FLAGCS=y
+CONFIG_FEATURE_LESS_MARKS=y
+CONFIG_FEATURE_LESS_REGEXP=y
+CONFIG_HDPARM=y
+CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
+CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
+CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
+CONFIG_MAKEDEVS=y
+# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
+CONFIG_FEATURE_MAKEDEVS_TABLE=y
+CONFIG_MICROCOM=y
+CONFIG_MOUNTPOINT=y
+CONFIG_MT=y
+# CONFIG_RAIDAUTORUN is not set
+# CONFIG_READAHEAD is not set
+CONFIG_RUNLEVEL=y
+CONFIG_RX=y
+CONFIG_STRINGS=y
+CONFIG_SETSID=y
+# CONFIG_TASKSET is not set
+# CONFIG_FEATURE_TASKSET_FANCY is not set
+CONFIG_TIME=y
+CONFIG_TTYSIZE=y
+CONFIG_WATCHDOG=y
+
+#
+# Networking Utilities
+#
+CONFIG_FEATURE_IPV6=y
+# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
+CONFIG_ARP=y
+CONFIG_ARPING=y
+CONFIG_DNSD=y
+CONFIG_ETHER_WAKE=y
+# CONFIG_FAKEIDENTD is not set
+CONFIG_FTPGET=y
+CONFIG_FTPPUT=y
+CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
+CONFIG_HOSTNAME=y
+CONFIG_HTTPD=y
+CONFIG_FEATURE_HTTPD_RANGES=y
+CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
+CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP=y
+CONFIG_FEATURE_HTTPD_SETUID=y
+CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
+CONFIG_FEATURE_HTTPD_AUTH_MD5=y
+CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES=y
+CONFIG_FEATURE_HTTPD_CGI=y
+CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
+CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
+CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
+CONFIG_FEATURE_HTTPD_ERROR_PAGES=y
+CONFIG_FEATURE_HTTPD_PROXY=y
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+# CONFIG_FEATURE_IFCONFIG_SLIP is not set
+# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
+CONFIG_FEATURE_IFCONFIG_HW=y
+# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
+CONFIG_IFUPDOWN=y
+CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
+# CONFIG_FEATURE_IFUPDOWN_IP is not set
+# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set
+CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN=y
+CONFIG_FEATURE_IFUPDOWN_IPV4=y
+CONFIG_FEATURE_IFUPDOWN_IPV6=y
+# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set
+CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
+CONFIG_INETD=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN=y
+CONFIG_FEATURE_INETD_RPC=y
+# CONFIG_IP is not set
+# CONFIG_FEATURE_IP_ADDRESS is not set
+# CONFIG_FEATURE_IP_LINK is not set
+# CONFIG_FEATURE_IP_ROUTE is not set
+# CONFIG_FEATURE_IP_TUNNEL is not set
+# CONFIG_FEATURE_IP_RULE is not set
+# CONFIG_FEATURE_IP_SHORT_FORMS is not set
+# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
+# CONFIG_IPADDR is not set
+# CONFIG_IPLINK is not set
+# CONFIG_IPROUTE is not set
+# CONFIG_IPTUNNEL is not set
+# CONFIG_IPRULE is not set
+# CONFIG_IPCALC is not set
+# CONFIG_FEATURE_IPCALC_FANCY is not set
+# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set
+# CONFIG_NAMEIF is not set
+# CONFIG_NC is not set
+# CONFIG_NC_SERVER is not set
+# CONFIG_NC_EXTRA is not set
+CONFIG_NETSTAT=y
+CONFIG_FEATURE_NETSTAT_WIDE=y
+CONFIG_NSLOOKUP=y
+CONFIG_PING=y
+CONFIG_PING6=y
+CONFIG_PSCAN=y
+CONFIG_FEATURE_FANCY_PING=y
+CONFIG_ROUTE=y
+# CONFIG_SLATTACH is not set
+CONFIG_TELNET=y
+CONFIG_FEATURE_TELNET_TTYPE=y
+CONFIG_FEATURE_TELNET_AUTOLOGIN=y
+CONFIG_TELNETD=y
+CONFIG_FEATURE_TELNETD_STANDALONE=y
+CONFIG_TFTP=y
+CONFIG_FEATURE_TFTP_GET=y
+CONFIG_FEATURE_TFTP_PUT=y
+CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+# CONFIG_DEBUG_TFTP is not set
+CONFIG_TRACEROUTE=y
+CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
+# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
+# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
+CONFIG_APP_UDHCPD=y
+# CONFIG_APP_DHCPRELAY is not set
+# CONFIG_APP_DUMPLEASES is not set
+# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
+CONFIG_APP_UDHCPC=y
+# CONFIG_FEATURE_UDHCP_DEBUG is not set
+# CONFIG_FEATURE_RFC3397 is not set
+CONFIG_VCONFIG=y
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
+# CONFIG_ZCIP is not set
+
+#
+# Process Utilities
+#
+CONFIG_FREE=y
+CONFIG_FUSER=y
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_KILLALL5=y
+CONFIG_NMETER=y
+CONFIG_PGREP=y
+CONFIG_PIDOF=y
+CONFIG_FEATURE_PIDOF_SINGLE=y
+CONFIG_FEATURE_PIDOF_OMIT=y
+CONFIG_PKILL=y
+CONFIG_PS=y
+CONFIG_FEATURE_PS_WIDE=y
+CONFIG_RENICE=y
+CONFIG_BB_SYSCTL=y
+CONFIG_TOP=y
+CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
+CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
+CONFIG_FEATURE_TOP_DECIMALS=y
+CONFIG_FEATURE_TOPMEM=y
+CONFIG_UPTIME=y
+CONFIG_WATCH=y
+
+#
+# Shells
+#
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_LASH is not set
+# CONFIG_FEATURE_SH_IS_MSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+CONFIG_ASH=y
+
+#
+# Ash Shell Options
+#
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_READ_NCHARS=y
+CONFIG_ASH_READ_TIMEOUT=y
+CONFIG_ASH_ALIAS=y
+CONFIG_ASH_MATH_SUPPORT=y
+CONFIG_ASH_MATH_SUPPORT_64=y
+CONFIG_ASH_GETOPTS=y
+CONFIG_ASH_BUILTIN_ECHO=y
+CONFIG_ASH_BUILTIN_TEST=y
+# CONFIG_ASH_CMDCMD is not set
+# CONFIG_ASH_MAIL is not set
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+# CONFIG_ASH_RANDOM_SUPPORT is not set
+CONFIG_ASH_EXPAND_PRMT=y
+# CONFIG_HUSH is not set
+# CONFIG_HUSH_HELP is not set
+# CONFIG_HUSH_INTERACTIVE is not set
+# CONFIG_HUSH_JOB is not set
+# CONFIG_HUSH_TICK is not set
+# CONFIG_HUSH_IF is not set
+# CONFIG_HUSH_LOOPS is not set
+# CONFIG_LASH is not set
+# CONFIG_MSH is not set
+
+#
+# Bourne Shell Options
+#
+# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
+# CONFIG_FEATURE_SH_STANDALONE is not set
+# CONFIG_CTTYHACK is not set
+
+#
+# System Logging Utilities
+#
+CONFIG_SYSLOGD=y
+CONFIG_FEATURE_ROTATE_LOGFILE=y
+# CONFIG_FEATURE_REMOTE_LOG is not set
+# CONFIG_FEATURE_IPC_SYSLOG is not set
+CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=
+# CONFIG_LOGREAD is not set
+# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
+CONFIG_KLOGD=y
+CONFIG_LOGGER=y
+
+#
+# Runit Utilities
+#
+# CONFIG_RUNSV is not set
+# CONFIG_RUNSVDIR is not set
+# CONFIG_SV is not set
+# CONFIG_SVLOGD is not set
+# CONFIG_CHPST is not set
+# CONFIG_SETUIDGID is not set
+# CONFIG_ENVUIDGID is not set
+# CONFIG_ENVDIR is not set
+# CONFIG_SOFTLIMIT is not set
+# CONFIG_CHCON is not set
+# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
+# CONFIG_GETENFORCE is not set
+# CONFIG_GETSEBOOL is not set
+# CONFIG_LOAD_POLICY is not set
+# CONFIG_MATCHPATHCON is not set
+# CONFIG_RESTORECON is not set
+# CONFIG_RUNCON is not set
+# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
+# CONFIG_SELINUXENABLED is not set
+# CONFIG_SETENFORCE is not set
+# CONFIG_SETFILES is not set
+# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
+# CONFIG_SETSEBOOL is not set
+
+#
+# ipsvd utilities
+#
+# CONFIG_TCPSVD is not set
+# CONFIG_UDPSVD is not set
diff --git a/target/device/Atmel/atstk1005/device_table.txt b/target/device/Atmel/atstk1005/device_table.txt
new file mode 100644
index 000000000..1b76a3040
--- /dev/null
+++ b/target/device/Atmel/atstk1005/device_table.txt
@@ -0,0 +1,181 @@
+# When building a target filesystem, it is desirable to not have to become
+# root and then run 'mknod' a thousand times.  Using a device table you can
+# create device nodes and directories "on the fly".
+#
+# This is a sample device table file for use with genext2fs.  You can do all
+# sorts of interesting things with a device table file.  For example, if you
+# want to adjust the permissions on a particular file you can just add an
+# entry like:
+#   /sbin/foobar        f       2755    0       0       -       -       -       -       -
+# and (assuming the file /sbin/foobar exists) it will be made setuid root
+# (regardless of what its permissions are on the host filesystem.
+# Furthermore, you can use a single table entry to create a many device
+# minors.  For example, if I wanted to create /dev/hda and /dev/hda[0-15] I
+# could just use the following two table entries:
+#   /dev/hda    b       640     0       0       3       0       0       0       -
+#   /dev/hda    b       640     0       0       3       1       1       1       15
+#
+# Device table entries take the form of:
+# <name>    <type>      <mode>  <uid>   <gid>   <major> <minor> <start> <inc>   <count>
+# where name is the file name,  type can be one of:
+#       f       A regular file
+#       d       Directory
+#       c       Character special device file
+#       b       Block special device file
+#       p       Fifo (named pipe)
+# uid is the user id for the target file, gid is the group id for the target
+# file.  The rest of the entries (major, minor, etc) apply only to device
+# special files.
+
+# Have fun
+# -Erik Andersen <andersen@codepoet.org>
+#
+
+#<name>		<type>	<mode>	<uid>	<gid>	<major>	<minor>	<start>	<inc>	<count>
+/dev		d	755	0	0	-	-	-	-	-
+#/dev/pts	d	755	0	0	-	-	-	-	-
+#/dev/shm	d	755	0	0	-	-	-	-	-
+/tmp		d	1777	0	0	-	-	-	-	-
+/etc		d	755	0	0	-	-	-	-	-
+/sys		d	755	0	0	-	-	-	-	-
+/config		d	755	0	0	-	-	-	-	-
+/proc		d	755	0	0	-	-	-	-	-
+/lost+found	d	700	0	0	-	-	-	-	-
+/var/lock	d	1777	0	0	-	-	-	-	-
+/var/log	d	755	0	0	-	-	-	-	-
+/var/run	d	1777	0	0	-	-	-	-	-
+/var/tmp	d	1777	0	0	-	-	-	-	-
+/home/avr32	d	2755	500	500	-	-	-	-	-
+/home/default	d	2755	1000	1000	-	-	-	-	-
+/media		d	755	0	0	-	-	-	-	-
+/www		d	755	0	0	-	-	-	-	-
+#<name>					<type>	<mode>	<uid>	<gid>	<major>	<minor>	<start>	<inc>	<count>
+/bin/busybox				f	4755	0	0	-	-	-	-	-
+#/etc/shadow				f	600	0	0	-	-	-	-	-
+/etc/passwd				f	644	0	0	-	-	-	-	-
+/etc/network/if-up.d			d	755	0	0	-	-	-	-	-
+/etc/network/if-pre-up.d		d	755	0	0	-	-	-	-	-
+/etc/network/if-down.d			d	755	0	0	-	-	-	-	-
+/etc/network/if-post-down.d		d	755	0	0	-	-	-	-	-
+# uncomment this to allow starting x as non-root
+#/usr/X11R6/bin/Xfbdev		f	4755	0	0	-	-	-	-	-
+# Normal system devices
+#/dev/mem	c	640	0	0	1	1	0	0	-
+#/dev/kmem	c	640	0	0	1	2	0	0	-
+/dev/null	c	666	0	0	1	3	0	0	-
+#/dev/zero	c	666	0	0	1	5	0	0	-
+#/dev/random	c	666	0	0	1	8	0	0	-
+#/dev/urandom	c	666	0	0	1	9	0	0	-
+#/dev/ram	b	640	0	0	1	1	0	0	-
+#/dev/ram	b	640	0	0	1	0	0	1	4
+#/dev/loop	b	640	0	0	7	0	0	1	2
+#/dev/rtc	c	640	0	0	10	135	-	-	-
+/dev/console	c	666	0	0	5	1	-	-	-
+#/dev/tty	c	666	0	0	5	0	-	-	-
+#/dev/tty	c	666	0	0	4	0	0	1	8
+#/dev/ttyp	c	666	0	0	3	0	0	1	10
+#/dev/ptyp	c       666     0       0       2       0       0       1       10
+#/dev/ptmx	c	666	0	0	5	2	-	-	-
+#/dev/ttyP	c	666	0	0	57	0	0	1	4
+#/dev/ttyS	c	666	0	0	4	64	0	1	4
+#/dev/fb		c	640	0	5	29	0	0	32	4
+#/dev/ttySA	c	666	0	0	204	5	0	1	3
+#/dev/psaux	c	666	0	0	10	1	0	0	-
+#/dev/ppp	c	666	0	0	108	0	-	-	-
+
+# Input stuff
+#/dev/input		d	755	0	0	-	-	-	-	-
+#/dev/input/mice		c	640	0	0	13	63	0	0	-
+#/dev/input/mouse	c	660	0	0	13	32	0	1	4
+#/dev/input/event	c	660	0	0	13	64	0	1	4
+#/dev/input/js		c	660	0	0	13	0	0	1	4
+
+
+# MTD stuff
+#/dev/mtd	c	640	0	0	90	0	0	2	4
+#/dev/mtdblock	b	640	0	0	31	0	0	1	4
+
+#Tun/tap driver
+#/dev/net	d	755	0	0	-	-	-	-	-
+#/dev/net/tun	c	660	0	0	10	200	-	-	-
+
+# Audio stuff
+#/dev/audio	c	666	0	29	14	4	-	-	-
+#/dev/audio1	c	666	0	29	14	20	-	-	-
+#/dev/dsp	c	666	0	29	14	3	-	-	-
+#/dev/dsp1	c	666	0	29	14	19	-	-	-
+#/dev/sndstat	c	666	0	29	14	6	-	-	-
+
+# User-mode Linux stuff
+#/dev/ubda	b	640	0	0	98	0	0	0	-
+#/dev/ubda	b	640	0	0	98	1	1	1	15
+
+# IDE Devices
+#/dev/hda	b	640	0	0	3	0	0	0	-
+#/dev/hda	b	640	0	0	3	1	1	1	15
+#/dev/hdb	b	640	0	0	3	64	0	0	-
+#/dev/hdb	b	640	0	0	3	65	1	1	15
+#/dev/hdc	b	640	0	0	22	0	0	0	-
+#/dev/hdc	b	640	0	0	22	1	1	1	15
+#/dev/hdd	b	640	0	0	22	64	0	0	-
+#/dev/hdd	b	640	0	0	22	65	1	1	15
+#/dev/hde	b	640	0	0	33	0	0	0	-
+#/dev/hde	b	640	0	0	33	1	1	1	15
+#/dev/hdf	b	640	0	0	33	64	0	0	-
+#/dev/hdf	b	640	0	0	33	65	1	1	15
+#/dev/hdg	b	640	0	0	34	0	0	0	-
+#/dev/hdg	b	640	0	0	34	1	1	1	15
+#/dev/hdh	b	640	0	0	34	64	0	0	-
+#/dev/hdh	b	640	0	0	34	65	1	1	15
+
+# SCSI Devices
+#/dev/sda	b	640	0	0	8	0	0	0	-
+#/dev/sda	b	640	0	0	8	1	1	1	15
+#/dev/sdb	b	640	0	0	8	16	0	0	-
+#/dev/sdb	b	640	0	0	8	17	1	1	15
+#/dev/sdc	b	640	0	0	8	32	0	0	-
+#/dev/sdc	b	640	0	0	8	33	1	1	15
+#/dev/sdd	b	640	0	0	8	48	0	0	-
+#/dev/sdd	b	640	0	0	8	49	1	1	15
+#/dev/sde	b	640	0	0	8	64	0	0	-
+#/dev/sde	b	640	0	0	8	65	1	1	15
+#/dev/sdf	b	640	0	0	8	80	0	0	-
+#/dev/sdf	b	640	0	0	8	81	1	1	15
+#/dev/sdg	b	640	0	0	8	96	0	0	-
+#/dev/sdg	b	640	0	0	8	97	1	1	15
+#/dev/sdh	b	640	0	0	8	112	0	0	-
+#/dev/sdh	b	640	0	0	8	113	1	1	15
+#/dev/sg	c	640	0	0	21	0	0	1	15
+#/dev/scd	b	640	0	0	11	0	0	1	15
+#/dev/st	c	640	0	0	9	0	0	1	8
+#/dev/nst	c	640	0	0	9	128	0	1	8
+#/dev/st	c	640	0	0	9	32	1	1	4
+#/dev/st	c	640	0	0	9	64	1	1	4
+#/dev/st	c	640	0	0	9	96	1	1	4
+
+# Floppy disk devices
+#/dev/fd	b	640	0	0	2	0	0	1	2
+#/dev/fd0d360	b	640	0	0	2	4	0	0	-
+#/dev/fd1d360	b	640	0	0	2	5	0	0	-
+#/dev/fd0h1200	b	640	0	0	2	8	0	0	-
+#/dev/fd1h1200	b	640	0	0	2	9	0	0	-
+#/dev/fd0u1440	b	640	0	0	2	28	0	0	-
+#/dev/fd1u1440	b	640	0	0	2	29	0	0	-
+#/dev/fd0u2880	b	640	0	0	2	32	0	0	-
+#/dev/fd1u2880	b	640	0	0	2	33	0	0	-
+
+# All the proprietary cdrom devices in the world
+#/dev/aztcd	b	640	0	0	29	0	0	0	-
+#/dev/bpcd	b	640	0	0	41	0	0	0	-
+#/dev/capi20	c	640	0	0	68	0	0	1	2
+#/dev/cdu31a	b	640	0	0	15	0	0	0	-
+#/dev/cdu535	b	640	0	0	24	0	0	0	-
+#/dev/cm206cd	b	640	0	0	32	0	0	0	-
+#/dev/sjcd	b	640	0	0	18	0	0	0	-
+#/dev/sonycd	b	640	0	0	15	0	0	0	-
+#/dev/gscd	b	640	0	0	16	0	0	0	-
+#/dev/sbpcd	b	640	0	0	25	0	0	0	-
+#/dev/sbpcd	b	640	0	0	25	0	0	1	4
+#/dev/mcd	b	640	0	0	23	0	0	0	-
+#/dev/optcd	b	640	0	0	17	0	0	0	-
+
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/TZ b/target/device/Atmel/atstk1005/target_skeleton/etc/TZ
new file mode 100644
index 000000000..36498c4a7
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/TZ
@@ -0,0 +1 @@
+CET1CDT
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/asound.state b/target/device/Atmel/atstk1005/target_skeleton/etc/asound.state
new file mode 100644
index 000000000..55fb3f00a
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/asound.state
@@ -0,0 +1,108 @@
+state.at73c213_0 {
+	control.1 {
+		comment.access 'read write'
+		comment.type INTEGER
+		comment.count 2
+		comment.range '0 - 31'
+		iface MIXER
+		name 'Master Playback Volume'
+		value.0 21
+		value.1 21
+	}
+	control.2 {
+		comment.access 'read write'
+		comment.type BOOLEAN
+		comment.count 2
+		iface MIXER
+		name 'Master Playback Switch'
+		value.0 true
+		value.1 true
+	}
+	control.3 {
+		comment.access 'read write'
+		comment.type INTEGER
+		comment.count 2
+		comment.range '0 - 31'
+		iface MIXER
+		name 'PCM Playback Volume'
+		value.0 21
+		value.1 21
+	}
+	control.4 {
+		comment.access 'read write'
+		comment.type BOOLEAN
+		comment.count 2
+		iface MIXER
+		name 'PCM Playback Switch'
+		value.0 true
+		value.1 true
+	}
+	control.5 {
+		comment.access 'read write'
+		comment.type BOOLEAN
+		comment.count 1
+		iface MIXER
+		name 'Mono PA Playback Switch'
+		value true
+	}
+	control.6 {
+		comment.access 'read write'
+		comment.type INTEGER
+		comment.count 1
+		comment.range '0 - 14'
+		iface MIXER
+		name 'PA Playback Volume'
+		value 10
+	}
+	control.7 {
+		comment.access 'read write'
+		comment.type BOOLEAN
+		comment.count 1
+		iface MIXER
+		name 'PA High Gain Playback Switch'
+		value true
+	}
+	control.8 {
+		comment.access 'read write'
+		comment.type BOOLEAN
+		comment.count 1
+		iface MIXER
+		name 'PA Playback Switch'
+		value true
+	}
+	control.9 {
+		comment.access 'read write'
+		comment.type INTEGER
+		comment.count 1
+		comment.range '14 - 31'
+		iface MIXER
+		name 'Aux Capture Volume'
+		value 14
+	}
+	control.10 {
+		comment.access 'read write'
+		comment.type BOOLEAN
+		comment.count 1
+		iface MIXER
+		name 'Aux Capture Switch'
+		value false
+	}
+	control.11 {
+		comment.access 'read write'
+		comment.type INTEGER
+		comment.count 2
+		comment.range '14 - 31'
+		iface MIXER
+		name 'Line Capture Volume'
+		value.0 14
+		value.1 14
+	}
+	control.12 {
+		comment.access 'read write'
+		comment.type BOOLEAN
+		comment.count 1
+		iface MIXER
+		name 'Line Capture Switch'
+		value false
+	}
+}
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/default/ntpdate b/target/device/Atmel/atstk1005/target_skeleton/etc/default/ntpdate
new file mode 100644
index 000000000..80d8608c2
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/default/ntpdate
@@ -0,0 +1,6 @@
+# servers to check.   (Separate multiple servers with spaces.)
+NTPSERVERS="pool.ntp.org"
+#
+# additional options for ntpdate
+#NTPOPTIONS="-v"
+NTPOPTIONS="-u"
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/dnsmasq.conf b/target/device/Atmel/atstk1005/target_skeleton/etc/dnsmasq.conf
new file mode 100644
index 000000000..09a3681e2
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/dnsmasq.conf
@@ -0,0 +1,385 @@
+# Configuration file for dnsmasq.
+#
+# Format is one option per line, legal options are the same
+# as the long options legal on the command line. See
+# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.
+
+# The following two options make you a better netizen, since they
+# tell dnsmasq to filter out queries which the public DNS cannot
+# answer, and which load the servers (especially the root servers)
+# uneccessarily. If you have a dial-on-demand link they also stop
+# these requests from bringing up the link uneccessarily.
+
+# Never forward plain names (without a dot or domain part)
+domain-needed
+# Never forward addresses in the non-routed address spaces.
+bogus-priv
+
+
+# Uncomment this to filter useless windows-originated DNS requests
+# which can trigger dial-on-demand links needlessly.
+# Note that (amongst other things) this blocks all SRV requests,
+# so don't use it if you use eg Kerberos.
+# This option only affects forwarding, SRV records originating for
+# dnsmasq (via srv-host= lines) are not suppressed by it.
+#filterwin2k
+
+# Change this line if you want dns to get its upstream servers from
+# somewhere other that /etc/resolv.conf
+#resolv-file=
+
+# By  default,  dnsmasq  will  send queries to any of the upstream
+# servers it knows about and tries to favour servers to are  known
+# to  be  up.  Uncommenting this forces dnsmasq to try each query
+# with  each  server  strictly  in  the  order  they   appear   in
+# /etc/resolv.conf
+#strict-order
+
+# If you don't want dnsmasq to read /etc/resolv.conf or any other
+# file, getting its servers from this file instead (see below), then
+# uncomment this
+#no-resolv
+
+# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
+# files for changes and re-read them then uncomment this.
+#no-poll
+
+# Add other name servers here, with domain specs if they are for
+# non-public domains.
+#server=/localnet/192.168.0.1
+
+# Add local-only domains here, queries in these domains are answered
+# from /etc/hosts or DHCP only.
+#local=/localnet/
+
+# Add domains which you want to force to an IP address here.
+# The example below send any host in doubleclick.net to a local
+# webserver.
+#address=/doubleclick.net/127.0.0.1
+
+# If you want dnsmasq to change uid and gid to something other
+# than the default, edit the following lines.
+user=dnsmasq
+#group=
+
+# If you want dnsmasq to listen for DHCP and DNS requests only on
+# specified interfaces (and the loopback) give the name of the
+# interface (eg eth0) here.
+# Repeat the line for more than one interface.
+interface=eth1
+# Or you can specify which interface _not_ to listen on
+except-interface=eth0
+# Or which to listen on by address (remember to include 127.0.0.1 if
+# you use this.)
+#listen-address=
+# If you want dnsmasq to provide only DNS service on an interface,
+# configure it as shown above, and then use the following line to
+# disable DHCP on it.
+#no-dhcp-interface=
+
+# On systems which support it, dnsmasq binds the wildcard address,
+# even when it is listening on only some interfaces. It then discards
+# requests that it shouldn't reply to. This has the advantage of
+# working even when interfaces come and go and change address. If you
+# want dnsmasq to really bind only the interfaces it is listening on,
+# uncomment this option. About the only time you may need this is when
+# running another nameserver on the same machine.
+#bind-interfaces
+
+# If you don't want dnsmasq to read /etc/hosts, uncomment the
+# following line.
+#no-hosts
+# or if you want it to read another file, as well as /etc/hosts, use
+# this.
+addn-hosts=/etc/hosts.dnsmasq
+
+# Set this (and domain: see below) if you want to have a domain
+# automatically added to simple names in a hosts-file.
+#expand-hosts
+
+# Set the domain for dnsmasq. this is optional, but if it is set, it
+# does the following things.
+# 1) Allows DHCP hosts to have fully qualified domain names, as long
+#     as the domain part matches this setting.
+# 2) Sets the "domain" DHCP option thereby potentially setting the
+#    domain of all systems configured by DHCP
+# 3) Provides the domain part for "expand-hosts"
+domain=example.net
+
+# Uncomment this to enable the integrated DHCP server, you need
+# to supply the range of addresses available for lease and optionally
+# a lease time. If you have more than one network, you will need to
+# repeat this for each network on which you want to supply DHCP
+# service.
+#dhcp-range=192.168.0.50,192.168.0.150,12h
+
+# This is an example of a DHCP range where the netmask is given. This
+# is needed for networks we reach the dnsmasq DHCP server via a relay
+# agent. If you don't know what a DHCP relay agent is, you probably
+# don't need to worry about this.
+dhcp-range=10.0.0.20,10.0.0.254,255.255.255.0,72h
+
+# This is an example of a DHCP range with a network-id, so that
+# some DHCP options may be set only for this network.
+#dhcp-range=red,192.168.0.50,192.168.0.150
+
+# Supply parameters for specified hosts using DHCP. There are lots
+# of valid alternatives, so we will give examples of each. Note that
+# IP addresses DO NOT have to be in the range given above, they just
+# need to be on the same network. The order of the parameters in these
+# do not matter, it's permissble to give name,adddress and MAC in any order
+
+# Always allocate the host with ethernet address 11:22:33:44:55:66
+# The IP address 192.168.0.60
+#dhcp-host=11:22:33:44:55:66,192.168.0.60
+
+# Always set the name of the host with hardware address
+# 11:22:33:44:55:66 to be "fred"
+#dhcp-host=11:22:33:44:55:66,fred
+
+# Always give the host with ethernet address 11:22:33:44:55:66
+# the name fred and IP address 192.168.0.60 and lease time 45 minutes
+#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m
+
+# Give the machine which says it's name is "bert" IP address
+# 192.168.0.70 and an infinite lease
+#dhcp-host=bert,192.168.0.70,infinite
+
+# Always give the host with client identifier 01:02:02:04
+# the IP address 192.168.0.60
+#dhcp-host=id:01:02:02:04,192.168.0.60
+
+# Always give the host with client identifier "marjorie"
+# the IP address 192.168.0.60
+#dhcp-host=id:marjorie,192.168.0.60
+
+# Enable the address given for "judge" in /etc/hosts
+# to be given to a machine presenting the name "judge" when
+# it asks for a DHCP lease.
+#dhcp-host=judge
+
+# Never offer DHCP service to a machine whose ethernet
+# address is 11:22:33:44:55:66
+#dhcp-host=11:22:33:44:55:66,ignore
+
+# Ignore any client-id presented by the machine with ethernet
+# address 11:22:33:44:55:66. This is useful to prevent a machine
+# being treated differently when running under different OS's or
+# between PXE boot and OS boot.
+#dhcp-host=11:22:33:44:55:66,id:*
+
+# Send extra options which are tagged as "red" to
+# the machine with ethernet address 11:22:33:44:55:66
+#dhcp-host=11:22:33:44:55:66,net:red
+
+# Send extra options which are tagged as "red" to
+# any machine with ethernet address starting 11:22:33:
+#dhcp-host=11:22:33:*:*:*,net:red
+
+# Send extra options which are tagged as "red" to any machine whose
+# DHCP vendorclass string includes the substring "Linux"
+#dhcp-vendorclass=red,Linux
+
+# Send extra options which are tagged as "red" to any machine one
+# of whose DHCP userclass strings includes the substring "accounts"
+#dhcp-userclass=red,accounts
+
+# Send extra options which are tagged as "red" to any machine whose
+# MAC address matches the pattern.
+#dhcp-mac=red,00:60:8C:*:*:*
+
+# If this line is uncommented, dnsmasq will read /etc/ethers and act
+# on the ethernet-address/IP pairs found there just as if they had
+# been given as --dhcp-host options. Useful if you keep
+# MAC-address/host mappings there for other purposes.
+read-ethers
+
+# Send options to hosts which ask for a DHCP lease.
+# See RFC 2132 for details of available options.
+# Note that all the common settings, such as netmask and
+# broadcast address, DNS server and default route, are given
+# sane defaults by dnsmasq. You very likely will not need any
+# any dhcp-options. If you use Windows clients and Samba, there
+# are some options which are recommended, they are detailed at the
+# end of this section.
+# For reference, the common options are:
+# subnet mask - 1
+# default router - 3
+# DNS server - 6
+# broadcast address - 28
+
+# Override the default route supplied by dnsmasq, which assumes the
+# router is the same machine as the one running dnsmasq.
+#dhcp-option=3,1.2.3.4
+
+# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
+#dhcp-option=42,192.168.0.4,10.10.0.5
+
+# Set the NTP time server address to be the same machine as
+# is running dnsmasq
+dhcp-option=42,0.0.0.0
+
+# Set the NIS domain name to "welly"
+#dhcp-option=40,welly
+
+# Set the default time-to-live to 50
+#dhcp-option=23,50
+
+# Set the "all subnets are local" flag
+#dhcp-option=27,1
+
+# Send the etherboot magic flag and then etherboot options (a string).
+#dhcp-option=128,e4:45:74:68:00:00
+#dhcp-option=129,NIC=eepro100
+
+# Specify an option which will only be sent to the "red" network
+# (see dhcp-range for the declaration of the "red" network)
+#dhcp-option=red,42,192.168.1.1
+
+# The following DHCP options set up dnsmasq in the same way as is specified
+# for the ISC dhcpcd in
+# http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt
+# adapted for a typical dnsmasq installation where the host running
+# dnsmasq is also the host running samba.
+# you may want to uncomment them if you use Windows clients and Samba.
+dhcp-option=19,0           # option ip-forwarding off
+dhcp-option=44,0.0.0.0     # set netbios-over-TCP/IP nameserver(s) aka WINS server(s)
+dhcp-option=45,0.0.0.0     # netbios datagram distribution server
+dhcp-option=46,8           # netbios node type
+dhcp-option=47             # empty netbios scope.
+
+# Send RFC-3397 DNS domain search DHCP option. WARNING: Your DHCP client
+# probably doesn't support this......
+#dhcp-option=119,eng.apple.com,marketing.apple.com
+
+# Send RFC-3442 classless static routes (note the netmask encoding)
+#dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8
+
+# Send encapsulated vendor-class specific options. The vendor-class
+# is sent as DHCP option 60, and all the options marked with the
+# vendor class are send encapsulated in DHCP option 43. The meaning of
+# the options is defined by the vendor-class. This example sets the
+# mtftp address to 0.0.0.0 for PXEClients
+#dhcp-option=vendor:PXEClient,1,0.0.0.0
+
+# Set the boot filename and tftpd server name and address
+# for BOOTP. You will only need this is you want to
+# boot machines over the network.
+#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3
+
+# Set the limit on DHCP leases, the default is 150
+#dhcp-lease-max=150
+
+# The DHCP server needs somewhere on disk to keep its lease database.
+# This defaults to a sane location, but if you want to change it, use
+# the line below.
+dhcp-leasefile=/var/lib/dnsmasq/dnsmasq.leases
+
+# Set the DHCP server to authoritative mode. In this mode it will barge in
+# and take over the lease for any client which broadcasts on the network,
+# whether it has a record of the lease or not. This avoids long timeouts
+# when a machine wakes up on a new network. DO NOT enable this if there's
+# the slighest chance that you might end up accidentally configuring a DHCP
+# server for your campus/company accidentally. The ISC server uses the same
+# the same option, and this URL provides more information:
+# http://www.isc.org/index.pl?/sw/dhcp/authoritative.php
+dhcp-authoritative
+
+# Run an executable when a DHCP lease is created or destroyed.
+# The arguments sent to the script are "add" or "del",
+# then the MAC address, the IP address and finally the hostname
+# if there is one.
+#dhcp-script=/bin/echo
+
+# Set the cachesize here.
+#cache-size=150
+
+# If you want to disable negative caching, uncomment this.
+#no-negcache
+
+# Normally responses which come form /etc/hosts and the DHCP lease
+# file have Time-To-Live set as zero, which conventionally means
+# do not cache further. If you are happy to trade lower load on the
+# server for potentially stale date, you can set a time-to-live (in
+# seconds) here.
+#local-ttl=
+
+# If you want dnsmasq to detect attempts by Verisign to send queries
+# to unregistered .com and .net hosts to its sitefinder service and
+# have dnsmasq instead return the correct NXDOMAIN response, uncomment
+# this line. You can add similar lines to do the same for other
+# registries which have implemented wildcard A records.
+#bogus-nxdomain=64.94.110.11
+
+# If you want to fix up DNS results from upstream servers, use the
+# alias option. This only works for IPv4.
+# This alias makes a result of 1.2.3.4 appear as 5.6.7.8
+#alias=1.2.3.4,5.6.7.8
+# and this maps 1.2.3.x to 5.6.7.x
+#alias=1.2.3.0,5.6.7.0,255.255.255.0
+
+
+# Change these lines if you want dnsmasq to serve MX records.
+
+# Return an MX record named "maildomain.com" with target
+# servermachine.com and preference 50
+#mx-host=maildomain.com,servermachine.com,50
+
+# Set the default target for MX records created using the localmx option.
+#mx-target=servermachine.com
+
+# Return an MX record pointing to the mx-target for all local
+# machines.
+#localmx
+
+# Return an MX record pointing to itself for all local machines.
+#selfmx
+
+# Change the following lines if you want dnsmasq to serve SRV
+# records.  These are useful if you want to serve ldap requests for
+# Active Directory and other windows-originated DNS requests.
+# See RFC 2782.
+# You may add multiple srv-host lines.
+# The fields are <name>,<target>,<port>,<priority>,<weight>
+# If the domain part if missing from the name (so that is just has the
+# service and protocol sections) then the domain given by the domain=
+# config option is used. (Note that expand-hosts does not need to be
+# set for this to work.)
+
+# A SRV record sending LDAP for the example.com domain to
+# ldapserver.example.com port 289
+#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389
+
+# A SRV record sending LDAP for the example.com domain to
+# ldapserver.example.com port 289 (using domain=)
+#domain=example.com
+#srv-host=_ldap._tcp,ldapserver.example.com,389
+
+# Two SRV records for LDAP, each with different priorities
+#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1
+#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2
+
+# A SRV record indicating that there is no LDAP server for the domain
+# example.com
+#srv-host=_ldap._tcp.example.com
+
+
+# Change the following lines to enable dnsmasq to serve TXT records.
+# These are used for things like SPF and zeroconf. (Note that the
+# domain-name expansion done for SRV records _does_not
+# occur for TXT records.)
+
+#Example SPF.
+#txt-record=example.com,v=spf1 a -all
+
+#Example zeroconf
+#txt-record=_http._tcp.example.com,name=value,paper=A4
+
+
+# For debugging purposes, log each DNS query as it passes through
+# dnsmasq.
+#log-queries
+
+# Include a another lot of configuration options.
+#conf-file=/etc/dnsmasq.more.conf
+
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/fb.modes b/target/device/Atmel/atstk1005/target_skeleton/etc/fb.modes
new file mode 100644
index 000000000..5884cca14
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/fb.modes
@@ -0,0 +1,5 @@
+mode "320x240-68"
+    # D: 6.891 MHz, H: 17.852 kHz, V: 68.400 Hz
+    geometry 320 240 320 240 24
+    timings 145116 17 33 10 10 16 1
+endmode
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/fstab b/target/device/Atmel/atstk1005/target_skeleton/etc/fstab
new file mode 100644
index 000000000..fcf1a78cd
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/fstab
@@ -0,0 +1,3 @@
+# /etc/fstab: static file system information.
+#
+# <file system>	<mount pt>	<type>		<options>	<dump>	<pass>
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/group b/target/device/Atmel/atstk1005/target_skeleton/etc/group
new file mode 100644
index 000000000..cec65da3f
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/group
@@ -0,0 +1,20 @@
+root::0:
+daemon:x:1:
+bin:x:2:
+sys:x:3:
+adm:x:4:
+tty:x:5:
+disk:x:6:
+kmem:x:9:
+wheel:x:10:root
+dialout:x:20:
+utmp:x:43:
+staff:x:50:
+www-data::51:
+ftp::52:
+haldaemon:x:68:
+dbus:x:81:
+audio::101:
+users::500:
+default::1000:
+nogroup::65534:
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/hostname b/target/device/Atmel/atstk1005/target_skeleton/etc/hostname
new file mode 100644
index 000000000..29a3f1c38
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/hostname
@@ -0,0 +1 @@
+stk1000.example.net
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/hosts b/target/device/Atmel/atstk1005/target_skeleton/etc/hosts
new file mode 100644
index 000000000..ef3816702
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/hosts
@@ -0,0 +1,12 @@
+127.0.0.1   localhost.localdomain localhost
+127.0.1.1   stk1000.example.net stk1000
+
+# The following lines are desirable for IPv6 capable hosts
+::1     localhost
+::1     ip6-localhost ip6-loopback
+::1     stk1000.example.net stk1000
+fe00::0 ip6-localnet
+ff00::0 ip6-mcastprefix
+ff02::1 ip6-allnodes
+ff02::2 ip6-allrouters
+ff02::3 ip6-allhosts
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/hosts.dnsmasq b/target/device/Atmel/atstk1005/target_skeleton/etc/hosts.dnsmasq
new file mode 100644
index 000000000..b831444c6
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/hosts.dnsmasq
@@ -0,0 +1,246 @@
+# Local server
+10.0.0.1 stk1000.example.net
+10.0.0.1 hostmaster.example.net
+10.0.0.1 ftp.example.net
+10.0.0.1 ns.example.net
+10.0.0.1 ssh.example.net
+10.0.0.1 samba.example.net
+10.0.0.1 telnet.example.net
+10.0.0.1 www.example.net
+
+# DHCP pool
+10.0.0.20 dhcp-020.example.net
+10.0.0.21 dhcp-021.example.net
+10.0.0.22 dhcp-022.example.net
+10.0.0.23 dhcp-023.example.net
+10.0.0.24 dhcp-024.example.net
+10.0.0.25 dhcp-025.example.net
+10.0.0.26 dhcp-026.example.net
+10.0.0.27 dhcp-027.example.net
+10.0.0.28 dhcp-028.example.net
+10.0.0.29 dhcp-029.example.net
+10.0.0.30 dhcp-030.example.net
+10.0.0.31 dhcp-031.example.net
+10.0.0.32 dhcp-032.example.net
+10.0.0.33 dhcp-033.example.net
+10.0.0.34 dhcp-034.example.net
+10.0.0.35 dhcp-035.example.net
+10.0.0.36 dhcp-036.example.net
+10.0.0.37 dhcp-037.example.net
+10.0.0.38 dhcp-038.example.net
+10.0.0.39 dhcp-039.example.net
+10.0.0.40 dhcp-040.example.net
+10.0.0.41 dhcp-041.example.net
+10.0.0.42 dhcp-042.example.net
+10.0.0.43 dhcp-043.example.net
+10.0.0.44 dhcp-044.example.net
+10.0.0.45 dhcp-045.example.net
+10.0.0.46 dhcp-046.example.net
+10.0.0.47 dhcp-047.example.net
+10.0.0.48 dhcp-048.example.net
+10.0.0.49 dhcp-049.example.net
+10.0.0.50 dhcp-050.example.net
+10.0.0.51 dhcp-051.example.net
+10.0.0.52 dhcp-052.example.net
+10.0.0.53 dhcp-053.example.net
+10.0.0.54 dhcp-054.example.net
+10.0.0.55 dhcp-055.example.net
+10.0.0.56 dhcp-056.example.net
+10.0.0.57 dhcp-057.example.net
+10.0.0.58 dhcp-058.example.net
+10.0.0.59 dhcp-059.example.net
+10.0.0.60 dhcp-060.example.net
+10.0.0.61 dhcp-061.example.net
+10.0.0.62 dhcp-062.example.net
+10.0.0.63 dhcp-063.example.net
+10.0.0.64 dhcp-064.example.net
+10.0.0.65 dhcp-065.example.net
+10.0.0.66 dhcp-066.example.net
+10.0.0.67 dhcp-067.example.net
+10.0.0.68 dhcp-068.example.net
+10.0.0.69 dhcp-069.example.net
+10.0.0.70 dhcp-070.example.net
+10.0.0.71 dhcp-071.example.net
+10.0.0.72 dhcp-072.example.net
+10.0.0.73 dhcp-073.example.net
+10.0.0.74 dhcp-074.example.net
+10.0.0.75 dhcp-075.example.net
+10.0.0.76 dhcp-076.example.net
+10.0.0.77 dhcp-077.example.net
+10.0.0.78 dhcp-078.example.net
+10.0.0.79 dhcp-079.example.net
+10.0.0.80 dhcp-080.example.net
+10.0.0.81 dhcp-081.example.net
+10.0.0.82 dhcp-082.example.net
+10.0.0.83 dhcp-083.example.net
+10.0.0.84 dhcp-084.example.net
+10.0.0.85 dhcp-085.example.net
+10.0.0.86 dhcp-086.example.net
+10.0.0.87 dhcp-087.example.net
+10.0.0.88 dhcp-088.example.net
+10.0.0.89 dhcp-089.example.net
+10.0.0.90 dhcp-090.example.net
+10.0.0.91 dhcp-091.example.net
+10.0.0.92 dhcp-092.example.net
+10.0.0.93 dhcp-093.example.net
+10.0.0.94 dhcp-094.example.net
+10.0.0.95 dhcp-095.example.net
+10.0.0.96 dhcp-096.example.net
+10.0.0.97 dhcp-097.example.net
+10.0.0.98 dhcp-098.example.net
+10.0.0.99 dhcp-099.example.net
+10.0.0.100 dhcp-100.example.net
+10.0.0.101 dhcp-101.example.net
+10.0.0.102 dhcp-102.example.net
+10.0.0.103 dhcp-103.example.net
+10.0.0.104 dhcp-104.example.net
+10.0.0.105 dhcp-105.example.net
+10.0.0.106 dhcp-106.example.net
+10.0.0.107 dhcp-107.example.net
+10.0.0.108 dhcp-108.example.net
+10.0.0.109 dhcp-109.example.net
+10.0.0.110 dhcp-110.example.net
+10.0.0.111 dhcp-111.example.net
+10.0.0.112 dhcp-112.example.net
+10.0.0.113 dhcp-113.example.net
+10.0.0.114 dhcp-114.example.net
+10.0.0.115 dhcp-115.example.net
+10.0.0.116 dhcp-116.example.net
+10.0.0.117 dhcp-117.example.net
+10.0.0.118 dhcp-118.example.net
+10.0.0.119 dhcp-119.example.net
+10.0.0.120 dhcp-120.example.net
+10.0.0.121 dhcp-121.example.net
+10.0.0.122 dhcp-122.example.net
+10.0.0.123 dhcp-123.example.net
+10.0.0.124 dhcp-124.example.net
+10.0.0.125 dhcp-125.example.net
+10.0.0.126 dhcp-126.example.net
+10.0.0.127 dhcp-127.example.net
+10.0.0.128 dhcp-128.example.net
+10.0.0.129 dhcp-129.example.net
+10.0.0.130 dhcp-130.example.net
+10.0.0.131 dhcp-131.example.net
+10.0.0.132 dhcp-132.example.net
+10.0.0.133 dhcp-133.example.net
+10.0.0.134 dhcp-134.example.net
+10.0.0.135 dhcp-135.example.net
+10.0.0.136 dhcp-136.example.net
+10.0.0.137 dhcp-137.example.net
+10.0.0.138 dhcp-138.example.net
+10.0.0.139 dhcp-139.example.net
+10.0.0.140 dhcp-140.example.net
+10.0.0.141 dhcp-141.example.net
+10.0.0.142 dhcp-142.example.net
+10.0.0.143 dhcp-143.example.net
+10.0.0.144 dhcp-144.example.net
+10.0.0.145 dhcp-145.example.net
+10.0.0.146 dhcp-146.example.net
+10.0.0.147 dhcp-147.example.net
+10.0.0.148 dhcp-148.example.net
+10.0.0.149 dhcp-149.example.net
+10.0.0.150 dhcp-150.example.net
+10.0.0.151 dhcp-151.example.net
+10.0.0.152 dhcp-152.example.net
+10.0.0.153 dhcp-153.example.net
+10.0.0.154 dhcp-154.example.net
+10.0.0.155 dhcp-155.example.net
+10.0.0.156 dhcp-156.example.net
+10.0.0.157 dhcp-157.example.net
+10.0.0.158 dhcp-158.example.net
+10.0.0.159 dhcp-159.example.net
+10.0.0.160 dhcp-160.example.net
+10.0.0.161 dhcp-161.example.net
+10.0.0.162 dhcp-162.example.net
+10.0.0.163 dhcp-163.example.net
+10.0.0.164 dhcp-164.example.net
+10.0.0.165 dhcp-165.example.net
+10.0.0.166 dhcp-166.example.net
+10.0.0.167 dhcp-167.example.net
+10.0.0.168 dhcp-168.example.net
+10.0.0.169 dhcp-169.example.net
+10.0.0.170 dhcp-170.example.net
+10.0.0.171 dhcp-171.example.net
+10.0.0.172 dhcp-172.example.net
+10.0.0.173 dhcp-173.example.net
+10.0.0.174 dhcp-174.example.net
+10.0.0.175 dhcp-175.example.net
+10.0.0.176 dhcp-176.example.net
+10.0.0.177 dhcp-177.example.net
+10.0.0.178 dhcp-178.example.net
+10.0.0.179 dhcp-179.example.net
+10.0.0.180 dhcp-180.example.net
+10.0.0.181 dhcp-181.example.net
+10.0.0.182 dhcp-182.example.net
+10.0.0.183 dhcp-183.example.net
+10.0.0.184 dhcp-184.example.net
+10.0.0.185 dhcp-185.example.net
+10.0.0.186 dhcp-186.example.net
+10.0.0.187 dhcp-187.example.net
+10.0.0.188 dhcp-188.example.net
+10.0.0.189 dhcp-189.example.net
+10.0.0.190 dhcp-190.example.net
+10.0.0.191 dhcp-191.example.net
+10.0.0.192 dhcp-192.example.net
+10.0.0.193 dhcp-193.example.net
+10.0.0.194 dhcp-194.example.net
+10.0.0.195 dhcp-195.example.net
+10.0.0.196 dhcp-196.example.net
+10.0.0.197 dhcp-197.example.net
+10.0.0.198 dhcp-198.example.net
+10.0.0.199 dhcp-199.example.net
+10.0.0.200 dhcp-200.example.net
+10.0.0.201 dhcp-201.example.net
+10.0.0.202 dhcp-202.example.net
+10.0.0.203 dhcp-203.example.net
+10.0.0.204 dhcp-204.example.net
+10.0.0.205 dhcp-205.example.net
+10.0.0.206 dhcp-206.example.net
+10.0.0.207 dhcp-207.example.net
+10.0.0.208 dhcp-208.example.net
+10.0.0.209 dhcp-209.example.net
+10.0.0.210 dhcp-210.example.net
+10.0.0.211 dhcp-211.example.net
+10.0.0.212 dhcp-212.example.net
+10.0.0.213 dhcp-213.example.net
+10.0.0.214 dhcp-214.example.net
+10.0.0.215 dhcp-215.example.net
+10.0.0.216 dhcp-216.example.net
+10.0.0.217 dhcp-217.example.net
+10.0.0.218 dhcp-218.example.net
+10.0.0.219 dhcp-219.example.net
+10.0.0.220 dhcp-220.example.net
+10.0.0.221 dhcp-221.example.net
+10.0.0.222 dhcp-222.example.net
+10.0.0.223 dhcp-223.example.net
+10.0.0.224 dhcp-224.example.net
+10.0.0.225 dhcp-225.example.net
+10.0.0.226 dhcp-226.example.net
+10.0.0.227 dhcp-227.example.net
+10.0.0.228 dhcp-228.example.net
+10.0.0.229 dhcp-229.example.net
+10.0.0.230 dhcp-230.example.net
+10.0.0.231 dhcp-231.example.net
+10.0.0.232 dhcp-232.example.net
+10.0.0.233 dhcp-233.example.net
+10.0.0.234 dhcp-234.example.net
+10.0.0.235 dhcp-235.example.net
+10.0.0.236 dhcp-236.example.net
+10.0.0.237 dhcp-237.example.net
+10.0.0.238 dhcp-238.example.net
+10.0.0.239 dhcp-239.example.net
+10.0.0.240 dhcp-240.example.net
+10.0.0.241 dhcp-241.example.net
+10.0.0.242 dhcp-242.example.net
+10.0.0.243 dhcp-243.example.net
+10.0.0.244 dhcp-244.example.net
+10.0.0.245 dhcp-245.example.net
+10.0.0.246 dhcp-246.example.net
+10.0.0.247 dhcp-247.example.net
+10.0.0.248 dhcp-248.example.net
+10.0.0.249 dhcp-249.example.net
+10.0.0.250 dhcp-250.example.net
+10.0.0.251 dhcp-251.example.net
+10.0.0.252 dhcp-252.example.net
+10.0.0.253 dhcp-253.example.net
+10.0.0.254 dhcp-254.example.net
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/httpd.conf b/target/device/Atmel/atstk1005/target_skeleton/etc/httpd.conf
new file mode 100644
index 000000000..640f8150d
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/httpd.conf
@@ -0,0 +1,2 @@
+# Allow all trafic
+A: *
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/inetd.conf b/target/device/Atmel/atstk1005/target_skeleton/etc/inetd.conf
new file mode 100644
index 000000000..23eba7988
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/inetd.conf
@@ -0,0 +1,3 @@
+#netbios-ssn	stream	tcp nowait	root.root /usr/sbin/smbd smbd
+#netbios-ns	dgram	udp wait	root.root /usr/sbin/nmbd nmbd
+#swat		stream	tcp nowait.400	root.root /usr/sbin/swat swat
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/K20alsa-utils b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/K20alsa-utils
new file mode 100644
index 000000000..68f746234
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/K20alsa-utils
@@ -0,0 +1,14 @@
+#!/bin/sh
+
+PROGRAM=/usr/sbin/alsactl
+
+# Exit silently if alsa-utils isn't installed
+[ -x ${PROGRAM} ] || exit 0
+
+echo -n "Saving mixer state: "
+if ${PROGRAM} store; then
+	echo "done"
+else
+	echo "failed"
+	exit 1
+fi
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/K70sendsig b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/K70sendsig
new file mode 100644
index 000000000..1a2485251
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/K70sendsig
@@ -0,0 +1 @@
+#!/bin/sh
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/K80netfs b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/K80netfs
new file mode 100644
index 000000000..1a2485251
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/K80netfs
@@ -0,0 +1 @@
+#!/bin/sh
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/K85network b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/K85network
new file mode 100644
index 000000000..d4e8e6139
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/K85network
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+IFDOWN=/sbin/ifdown
+
+echo -n "Stopping networking: "
+if ${IFDOWN} -a; then
+	echo "done"
+else
+	echo "failed"
+	exit 1
+fi
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/K90localfs b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/K90localfs
new file mode 100644
index 000000000..1a2485251
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/K90localfs
@@ -0,0 +1 @@
+#!/bin/sh
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S00mountvirtfs b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S00mountvirtfs
new file mode 100644
index 000000000..d9e5c9249
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S00mountvirtfs
@@ -0,0 +1,74 @@
+#!/bin/sh
+
+MOUNT=/bin/mount
+MKDIR=/bin/mkdir
+
+retval=0
+
+mount_fs()
+{
+	if [ "$1" = "" -o "$2" = "" -o "$3" = "" ]; then
+		return;
+	fi
+
+	if [ "$4" = "" ]; then
+		if ! ${MOUNT} -t $3 $1 $2; then
+			echo "  mount $2 failed"
+			retval=1
+			return 1
+		else
+			echo "  $2 mounted"
+		fi
+	else
+		if ! ${MOUNT} -t $3 -o $4 $1 $2; then
+			echo "  mount $2 failed"
+			retval=1
+			return 1
+		else
+			echo "  $2 mounted"
+		fi
+	fi
+
+	return 0
+}
+
+mkdir_fs()
+{
+	if [ "$1" = "" ]; then
+		return;
+	fi
+
+	if ! ${MKDIR} $1; then
+		echo "  mkdir $1 failed"
+		retval=1
+		return 1
+	else
+		echo "  $1 directory made"
+	fi
+
+	return 0
+}
+
+echo "Mounting virtual filesystems:"
+
+mount_fs proc /proc proc
+mount_fs sys /sys sysfs
+
+if mount_fs dev /dev tmpfs "size=512k,mode=0755"; then
+	mkdir_fs /dev/pts
+	mount_fs pts /dev/pts devpts
+	mkdir_fs /dev/shm
+	# g_serial is not detected by mdev.
+	mknod /dev/ttygserial c 127 0
+fi
+
+mount_fs config /config configfs
+mount_fs tmp /tmp tmpfs
+mount_fs run /var/run tmpfs
+mount_fs log /var/log tmpfs
+
+if [ $retval -ne 0 ]; then
+	echo "  WARNING: not able to mount all virtual file systems"
+fi
+
+exit $retval
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S01hotplug b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S01hotplug
new file mode 100644
index 000000000..15e075b88
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S01hotplug
@@ -0,0 +1,14 @@
+#!/bin/sh
+
+echo -n "Setting up mdev: "
+set -e
+trap 'echo "failed"' EXIT
+/bin/ln -s /proc/self/fd /dev/fd
+/bin/ln -s /proc/self/fd/0 /dev/stdin
+/bin/ln -s /proc/self/fd/1 /dev/stdout
+/bin/ln -s /proc/self/fd/2 /dev/stderr
+/bin/ln -s /proc/kcore /dev/core
+/bin/echo /sbin/mdev > /proc/sys/kernel/hotplug
+/sbin/mdev -s
+trap - EXIT
+echo "done"
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S02hostname b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S02hostname
new file mode 100644
index 000000000..cf858ed62
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S02hostname
@@ -0,0 +1,47 @@
+#!/bin/sh
+
+PROGRAM=/bin/hostname
+
+echo -n "Setting hostname: "
+[ -x ${PROGRAM} ] || (echo " missing"; exit 0)
+
+if [ -f /etc/hostname ]; then
+	HOST="$(cat /etc/hostname)"
+else
+	HOST="localhost.localdomain"
+fi
+
+start() {
+	if ${PROGRAM} "${HOST}"; then
+		echo "'${HOST}'"
+	else
+		echo "failed"
+		exit 1
+	fi
+}
+
+stop() {
+	return 0
+}
+
+restart() {
+	stop
+	start
+}
+
+case "$1" in
+  start)
+        start
+        ;;
+  stop)
+        stop
+        ;;
+  restart|reload)
+        restart
+        ;;
+  *)
+        echo $"Usage: $0 {start|stop|restart}"
+        exit 1
+esac
+
+exit $?
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S03bootsplash b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S03bootsplash
new file mode 100644
index 000000000..21a3a5758
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S03bootsplash
@@ -0,0 +1,25 @@
+#!/bin/sh
+
+FBV=/usr/bin/fbv
+FBSET=/usr/sbin/fbset
+FBMODEFILE="/etc/fb.modes"
+SPLASHFILE="/etc/stk1000bootsplash.jpg"
+
+echo -n "Bootsplash image: "
+if [ ! -x "${FBV}" -o ! -x "${FBSET}" -o \
+		! -f "${SPLASHFILE}" -o ! -f "${FBMODEFILE}" ]; then
+	echo "missing"
+	exit 1
+fi
+
+if ! ${FBSET} 320x240-68; then
+	echo "failed"
+	exit 1
+fi
+
+${FBV} ${SPLASHFILE} > /dev/null &
+if [ $? -eq 0 ]; then
+	echo "loaded"
+else
+	echo "failed"
+fi
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S08syslog b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S08syslog
new file mode 100644
index 000000000..58b05925d
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S08syslog
@@ -0,0 +1,24 @@
+#!/bin/sh
+
+SYSLOGD=/sbin/syslogd
+
+echo -n "Starting syslogd: "
+if [ ! -x "${SYSLOGD}" ]; then
+	echo "missing"
+	exit 1
+fi
+
+if ${SYSLOGD}; then
+	echo "done"
+else
+	echo "failed"
+	exit 1
+fi
+
+echo -n "Log messages to syslog: "
+if echo 4 4 1 7 > /proc/sys/kernel/printk; then
+	echo "done"
+else
+	echo "failed"
+	exit 1
+fi
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S09klog b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S09klog
new file mode 100644
index 000000000..1b0028a08
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S09klog
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+KLOGD=/sbin/klogd
+
+echo -n "Starting klogd: "
+if [ ! -x "${KLOGD}" ]; then
+	echo "missing"
+	exit 1
+fi
+
+if ${KLOGD}; then
+	echo "done"
+else
+	echo "failed"
+	exit 1
+fi
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S10modules-init b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S10modules-init
new file mode 100644
index 000000000..e2cf4e303
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S10modules-init
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+MODPROBE=/sbin/modprobe
+
+echo -n "Probing modules: "
+if [ ! -x "${MODPROBE}" -o ! -f "/etc/modules" ]; then
+	echo "missing"
+	exit 1
+else
+	echo
+fi
+
+grep '^[^#]' "/etc/modules" | \
+while read module args; do
+	[ "$module" ] || continue
+	if ${MODPROBE} $module $args; then
+		echo "  $module loaded"
+	else
+		echo "  $module failed"
+	fi
+done
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S15localfs b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S15localfs
new file mode 100644
index 000000000..a0b5a8982
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S15localfs
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+MOUNT=/bin/mount
+
+echo -n "Mounting local filesystems: "
+if ${MOUNT} -a; then
+	echo "done"
+else
+	echo "failed"
+	exit 1
+fi
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S20network b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S20network
new file mode 100644
index 000000000..06cf8cb00
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S20network
@@ -0,0 +1,11 @@
+#! /bin/sh
+
+IFUP=/sbin/ifup
+
+echo -n "Network interfaces: "
+if ${IFUP} -a; then
+	echo "done"
+else
+	echo "failed"
+	exit 1
+fi
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S40telnetd b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S40telnetd
new file mode 100644
index 000000000..e0fd2f2f3
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S40telnetd
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+TELNETD=/usr/sbin/telnetd
+
+echo -n "Starting telnetd: "
+if [ ! -x "${TELNETD}" ]; then
+	echo "missing"
+	exit 1
+fi
+
+if ${TELNETD} -l /bin/sh; then
+	echo "done"
+else
+	echo "failed"
+	exit 1
+fi
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S41inetd b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S41inetd
new file mode 100644
index 000000000..e485dcc5b
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S41inetd
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+INETD=/usr/sbin/inetd
+
+echo -n "Starting inetd: "
+if [ ! -x "${INETD}" ]; then
+	echo "missing"
+	exit 1
+fi
+
+if ${INETD}; then
+	echo "done"
+else
+	echo "failed"
+	exit 1
+fi
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S42httpd b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S42httpd
new file mode 100644
index 000000000..f8e7813e6
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S42httpd
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+HTTPD=/usr/sbin/httpd
+
+echo -n "Starting httpd: "
+if [ ! -x "${HTTPD}" ]; then
+	echo "missing"
+	exit 1
+fi
+
+if ${HTTPD} -h /www; then
+	echo "done"
+else
+	echo "failed"
+	exit 1
+fi
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S43ntp b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S43ntp
new file mode 100644
index 000000000..69fa4c894
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S43ntp
@@ -0,0 +1,27 @@
+#!/bin/sh
+
+NTPDATE=/usr/bin/ntpdate
+
+if [ -f /etc/default/ntpdate ]; then
+    . /etc/default/ntpdate
+else
+	echo "WARNING: missing /etc/default/ntpdate"
+	exit 1
+fi
+
+echo -n "Starting ntpdate: "
+if [ ! -x ${NTPDATE} ]; then
+	echo "missing"
+	echo -n "  WARNING: could not syncronize clock, "
+	echo "edit NTPSERVERS in /etc/default/ntpdate."
+	exit 1
+fi
+
+if ${NTPDATE} $NTPOPTIONS $NTPSERVERS; then
+	echo "done"
+else
+	echo "failed"
+	echo -n "  WARNING: could not syncronize clock, "
+	echo "edit NTPSERVERS in /etc/default/ntpdate."
+	exit 1
+fi
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S49netfs b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S49netfs
new file mode 100644
index 000000000..e1e0fbf4f
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S49netfs
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+MOUNT=/bin/mount
+
+echo -n "Mounting remote filesystems: "
+if ${MOUNT} -t nfs -a; then
+	echo "done"
+else
+	echo "failed"
+	exit 1
+fi
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S50alsa-utils b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S50alsa-utils
new file mode 100644
index 000000000..e92e5d8ae
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S50alsa-utils
@@ -0,0 +1,19 @@
+#!/bin/sh
+
+PROGRAM=/usr/sbin/alsactl
+
+# Exit silently if alsa-utils isn't installed
+[ -x ${PROGRAM} ] || exit 0
+
+echo -n "Restoring mixer state: "
+if [ ! -f /etc/asound.state ]; then
+	echo "missing"
+	exit 1
+fi
+
+if ${PROGRAM} restore; then
+	echo "done"
+else
+	echo "failed"
+	exit 1
+fi
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S99gpio b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S99gpio
new file mode 100644
index 000000000..967761aaf
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S99gpio
@@ -0,0 +1,142 @@
+#!/bin/sh
+
+echo -n "Get board type for GPIO: "
+if [ ! -e "/etc/release" ]; then
+	echo "missing";
+	exit 1
+fi
+
+BOARD=`cat /etc/release | cut -d ' ' -f1`
+
+if [ "${BOARD}" == "" ]; then
+	echo "none";
+elif [ "${BOARD}" == "NGW" ]; then
+	echo "'${BOARD}'"
+
+	echo -n "  boot LED: "
+	if mkdir /config/gpio/bootled > /dev/null 2> /dev/null; then
+		if ! echo 0 > /config/gpio/bootled/gpio_id; then
+			echo "failed"
+			exit 1
+		fi
+
+		if ! echo 0x10000 > /config/gpio/bootled/pin_mask; then
+			echo "failed"
+			exit 1
+		fi
+
+		if ! echo 0x10000 > /config/gpio/bootled/oe_mask; then
+			echo "failed"
+			exit 1
+		fi
+
+		if ! echo 1 > /config/gpio/bootled/enabled; then
+			echo "failed"
+			exit 1
+		fi
+
+		if ! echo 0x10000 > /dev/gpio0; then
+			echo "failed"
+			exit 1
+		fi
+
+		echo "done"
+	else
+		echo "failed"
+		exit 1
+	fi
+
+	echo -n "  LED A: "
+	if mkdir /config/gpio/leda > /dev/null 2> /dev/null; then
+		if ! echo 0 > /config/gpio/leda/gpio_id; then
+			echo "failed"
+			exit 1
+		fi
+
+		if ! echo 0x80000 > /config/gpio/leda/pin_mask; then
+			echo "failed"
+			exit 1
+		fi
+
+		if ! echo 0x80000 > /config/gpio/leda/oe_mask; then
+			echo "failed"
+			exit 1
+		fi
+
+		if ! echo 1 > /config/gpio/leda/enabled; then
+			echo "failed"
+			exit 1
+		fi
+
+		if ! echo 0 > /dev/gpio1; then
+			echo "failed"
+			exit 1
+		fi
+
+		echo "done"
+	else
+		echo "failed"
+		exit 1
+	fi
+
+	echo -n "  LED B: "
+	if mkdir /config/gpio/ledb > /dev/null 2> /dev/null; then
+		if ! echo 4 > /config/gpio/ledb/gpio_id; then
+			echo "failed"
+			exit 1
+		fi
+
+		if ! echo 0x80000 > /config/gpio/ledb/pin_mask; then
+			echo "failed"
+			exit 1
+		fi
+
+		if ! echo 0x80000 > /config/gpio/ledb/oe_mask; then
+			echo "failed"
+			exit 1
+		fi
+
+		if ! echo 1 > /config/gpio/ledb/enabled; then
+			echo "failed"
+			exit 1
+		fi
+
+		if ! echo 0 > /dev/gpio2; then
+			echo "failed"
+			exit 1
+		fi
+
+		echo "done"
+	else
+		echo "failed"
+		exit 1
+	fi
+elif [ "${BOARD}" == "STK1000" ]; then # end NGW
+	echo "'${BOARD}'"
+
+	echo -n "  switches: "
+	if mkdir /config/gpio/switches > /dev/null 2> /dev/null; then
+		if ! echo 1 > /config/gpio/switches/gpio_id; then
+			echo "failed"
+			exit 1
+		fi
+
+		if ! echo 0xff > /config/gpio/switches/pin_mask; then
+			echo "failed"
+			exit 1
+		fi
+
+		if ! echo 1 > /config/gpio/switches/enabled; then
+			echo "failed"
+			exit 1
+		fi
+
+		echo "done"
+	else
+		echo "failed"
+		exit 1
+	fi
+else # end STK1000
+	echo "'${BOARD}'"
+	echo "  WARNING: no GPIO for this board"
+fi
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S99splash b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S99splash
new file mode 100644
index 000000000..47001adb2
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/S99splash
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+PROGRAM=/usr/bin/fbv
+SPLASHFILE="/etc/stk1000splash.jpg"
+
+echo -n "Splash image: "
+if [ ! -x "${PROGRAM}" -o ! -f "${SPLASHFILE}" ]; then
+	echo "missing"
+	exit 1
+fi
+
+${PROGRAM} ${SPLASHFILE} > /dev/null &
+if [ $? -eq 0 ]; then
+	echo "loaded"
+else
+	echo "failed"
+fi
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/rcK b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/rcK
new file mode 100644
index 000000000..1db1400fa
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/rcK
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+echo "Shutting down ..."
+for k in /etc/init.d/K*; do
+	$k stop
+done
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/rcS b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/rcS
new file mode 100644
index 000000000..a8ea85cdc
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/init.d/rcS
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+for s in /etc/init.d/S*; do
+	if [ -x $s ]; then
+		$s start
+	fi
+done
+
+echo
+echo "STK1000 ready"
+echo
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/inittab b/target/device/Atmel/atstk1005/target_skeleton/etc/inittab
new file mode 100644
index 000000000..82672b1bd
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/inittab
@@ -0,0 +1,28 @@
+# Inittab for the ATSTK1000 development board
+#
+# Note: BusyBox init doesn't support runlevels.  The runlevels field is
+# completely ignored by BusyBox init. If you want runlevels, use sysvinit.
+#
+# Format for each entry: <id>:<runlevels>:<action>:<process>
+#
+# id        == tty to run on, or empty for /dev/console
+# runlevels == ignored
+# action    == one of sysinit, respawn, askfirst, wait, and once
+# process   == program to run
+
+# Run the rcS script after kernel is booted.
+::sysinit:/etc/init.d/rcS
+
+# Run a shell on the first serial port. Comment out if you want a getty instead.
+ttyS0::respawn:-/bin/sh
+
+# Run a shell on the g_serial port (USB gadget device)? This shell will spawn
+# error message if the device is not connected.
+#ttygserial::respawn:-/bin/sh
+
+# Uncomment this to run a getty on the first serial port.
+#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100
+ttyS2::respawn:/sbin/getty -L ttyS2 115200 vt100
+
+# Run a script on shutdown.
+::shutdown:/etc/init.d/rcK
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/mdev.conf b/target/device/Atmel/atstk1005/target_skeleton/etc/mdev.conf
new file mode 100644
index 000000000..046d0d40a
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/mdev.conf
@@ -0,0 +1,49 @@
+# mdev.conf for ATSTK1000
+#
+# Syntax:
+#  <regexp> <UID>:<GID> <PERM> [{@,$,*} <CMD>]
+#    @: run <CMD> after creating
+#    $: run <CMD> before removal
+#    *: like @ and $ at the same time
+#    <CMD> is run inside /dev using system()
+
+full	0:0	666
+null	0:0	777
+zero	0:0	666
+
+random	0:0	444
+urandom	0:0	444
+
+console	0:5	0600
+kmem	0:9	000
+mem	0:9	0640
+ptmx	0:5	0660
+
+sda.*	0:6	0660
+sdb.*	0:6	0660
+hda.*	0:6	0660
+hdb.*	0:6	0660
+mtd.*	0:6	0660
+mmc.*	0:6	0660
+
+# Move input devices to input directory
+event.*	0:0	0660	@(mkdir -p input&&mv $MDEV input)
+mice	0:0	0660	@(mkdir -p input&&mv $MDEV input)
+mouse.*	0:0	0660	@(mkdir -p input&&mv $MDEV input)
+
+# Move sound devices to sound directory
+pcm.*		0:101	0660	@(mkdir -p snd&&mv $MDEV snd)
+seq		0:101	0660	@(mkdir -p snd&&mv $MDEV snd)
+timer		0:101	0660	@(mkdir -p snd&&mv $MDEV snd)
+control.*	0:101	0660	@(mkdir -p snd&&mv $MDEV snd)
+
+tty	0:5	0660
+tty0.*	0:5	0660
+tty1.*	0:5	0660
+tty2.*	0:5	0660
+tty3.*	0:5	0660
+tty4.*	0:5	0660
+tty5.*	0:5	0660
+tty6.*	0:5	0660
+
+ttyS.*	0:20	640
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/modules b/target/device/Atmel/atstk1005/target_skeleton/etc/modules
new file mode 100644
index 000000000..82da2e76d
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/modules
@@ -0,0 +1,4 @@
+snd-at73c213
+snd-pcm-oss
+gpio_mouse
+mousedev
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/mplayer.conf b/target/device/Atmel/atstk1005/target_skeleton/etc/mplayer.conf
new file mode 100644
index 000000000..45d7d7ec9
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/mplayer.conf
@@ -0,0 +1,129 @@
+#
+# MPlayer configuration file
+#
+# Configuration files are read system-wide from /usr/local/etc/mplayer.conf
+# and per user from ~/.mplayer/config, where per-user settings override
+# system-wide settings, all of which are overrriden by the command line.
+#
+# The configuration file settings are the same as the command line
+# options without the preceding '-'.
+#
+# See the CONFIGURATION FILES section in the man page
+# for a detailed description of the syntax.
+
+
+##################
+# video settings #
+##################
+
+# Specify default video driver (see -vo help for a list).
+vo=fbdev2
+
+# Direct rendring, skip double buffering for framebuffer device
+dr=yes
+
+# Use SDL video with the aalib subdriver by default.
+#vo = sdl:aalib
+
+# FBdev driver:
+#
+# mode to use (read from fb.modes)
+#fbmode = 640x480-120
+#
+# location of the fb.modes file
+#fbmodeconfig = /etc/fb.modes
+
+# Specify your monitor timings for the vesa and fbdev video output drivers.
+# See /etc/X11/XF86Config for timings. Be careful; if you specify settings
+# that exceed the capabilities of your monitor, you may damage it.
+#
+# horizontal frequency range (k stands for 1000)
+#monitor-hfreq = 31.5k-50k,70k
+#
+# vertical frequency range
+#monitor-vfreq = 50-90
+#
+# dotclock (or pixelclock) range (m stands for 1000000)
+#monitor-dotclock = 30M-300M
+
+# Start in fullscreen mode by default.
+#fs=yes
+
+# Change to a different videomode when going fullscreen.
+#vm=yes
+
+# Override the autodetected color depth, may need 'vm=yes' as well.
+#bpp=0
+
+# Enable software scaling (powerful CPU needed) for video output
+# drivers that do not support hardware scaling.
+#zoom=yes
+
+# standard monitor size, with square pixels
+#monitoraspect=4:3
+
+# Use this for a widescreen monitor, non-square pixels.
+#monitoraspect=16:9
+
+# Keep the player window on top of all other windows.
+#ontop=yes
+
+
+##################
+# audio settings #
+##################
+
+# Specify default audio driver (see -ao help for a list).
+ao=oss,
+
+# Use SDL audio driver with the esd subdriver by default.
+#ao = sdl:esd
+
+# Specify the mixer device.
+#mixer = /dev/mixer
+
+# Resample the sound to 44100Hz with the lavcresample audio filter.
+#af=lavcresample=44100
+
+# Specify default audio codec (see -ac help for a list).
+ac=mad,
+
+
+##################
+# other settings #
+##################
+
+# Drop frames to preserve audio/video sync.
+#framedrop = yes
+
+# Specify your preferred skin here (skins are searched for in
+# /usr/local/share/mplayer/skins/<name> and ~/.mplayer/skins/<name>).
+#skin = Abyss
+
+# Resample the font alphamap.
+# 0     plain white fonts
+# 0.75  very narrow black outline (default)
+# 1     narrow black outline
+# 10    bold black outline
+#ffactor = 0.75
+
+# cache settings
+#
+# Use 8MB input cache by default.
+#cache = 8192
+#
+# Prefill 20% of the cache before starting playback.
+#cache-min = 20.0
+#
+# Prefill 50% of the cache before restarting playback after the cache emptied.
+#cache-seek-min = 50
+
+# DVD: Display English subtitles if available.
+#slang = en
+
+# DVD: Play English audio tracks if available.
+#alang = en
+
+
+# You can also include other configuration files.
+#include = /path/to/the/file/you/want/to/include
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/mtab b/target/device/Atmel/atstk1005/target_skeleton/etc/mtab
new file mode 100644
index 000000000..e1c204547
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/mtab
@@ -0,0 +1 @@
+../proc/mounts
\ No newline at end of file
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/network/interfaces b/target/device/Atmel/atstk1005/target_skeleton/etc/network/interfaces
new file mode 100644
index 000000000..a20055c77
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/network/interfaces
@@ -0,0 +1,11 @@
+# Configure Loopback
+auto lo
+iface lo inet loopback
+
+# Configure Ethernet 0
+auto eth0
+iface eth0 inet dhcp
+
+# Configure Ethernet 1, not enabled by default
+#auto eth1
+iface eth1 inet dhcp
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/ntp.conf b/target/device/Atmel/atstk1005/target_skeleton/etc/ntp.conf
new file mode 100644
index 000000000..d1b0af96f
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/ntp.conf
@@ -0,0 +1,49 @@
+# /etc/ntp.conf, configuration for ntpd
+
+# ntpd will use syslog() if logfile is not defined
+#logfile /var/log/ntpd
+
+driftfile /var/lib/ntp/ntp.drift
+statsdir /var/log/
+
+statistics loopstats peerstats clockstats
+filegen loopstats file loopstats type day enable
+filegen peerstats file peerstats type day enable
+filegen clockstats file clockstats type day enable
+
+# You do need to talk to an NTP server or two (or three).
+#server ntp.your-provider.example
+
+# pool.ntp.org maps to more than 100 low-stratum NTP servers.
+# Your server will pick a different set every time it starts up.
+#  *** Please consider joining the pool! ***
+#  ***  <http://www.pool.ntp.org/#join>  ***
+server pool.ntp.org
+server pool.ntp.org
+
+# ... and use the local system clock as a reference if all else fails
+# NOTE: in a local network, set the local stratum of *one* stable server
+# to 10; otherwise your clocks will drift apart if you lose connectivity.
+server 127.127.1.0
+fudge 127.127.1.0 stratum 13
+
+# By default, exchange time with everybody, but don't allow configuration.
+# See /usr/share/doc/ntp-doc/html/accopt.html for details.
+restrict default kod notrap nomodify nopeer noquery
+
+# Local users may interrogate the ntp server more closely.
+restrict 127.0.0.1 nomodify
+
+# Clients from this (example!) subnet have unlimited access,
+# but only if cryptographically authenticated
+restrict 10.0.0.0 mask 255.255.255.0 notrust
+
+# If you want to provide time to your local subnet, change the next line.
+# (Again, the address is an example only.)
+broadcast 10.0.0.255
+
+# If you want to listen to time broadcasts on your local subnet,
+# de-comment the next lines. Please do this only if you trust everybody
+# on the network!
+#disable auth
+#broadcastclient
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/passwd b/target/device/Atmel/atstk1005/target_skeleton/etc/passwd
new file mode 100644
index 000000000..5e073f677
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/passwd
@@ -0,0 +1,18 @@
+root:x:0:0:root:/:/bin/sh
+daemon:x:1:1:daemon:/usr/sbin:/bin/sh
+bin:x:2:2:bin:/bin:/bin/sh
+sys:x:3:3:sys:/dev:/bin/sh
+sync:x:4:100:sync:/bin:/bin/sync
+mail:x:8:8:mail:/var/spool/mail:/bin/sh
+proxy:x:13:13:proxy:/bin:/bin/sh
+www-data:x:33:33:www-data:/var/www:/bin/sh
+backup:x:34:34:backup:/var/backups:/bin/sh
+operator:x:37:37:Operator:/var:/bin/sh
+haldaemon:x:68:68:hald:/:/bin/sh
+dbus:x:81:81:dbus:/var/run/dbus:/bin/sh
+ftp:x:50:50:Anonymous FTP user:/home/ftp:/bin/ash
+dnsmasq:x:52:52:dnsmasq:/var/lib/dnsmasq:/bin/false
+sshd:x:110:65534:Operator:/var/run/sshd:/bin/false
+nobody:x:65534:65534:nobody:/nonexistent:/bin/false
+avr32:x:500:500:Linux User,,,:/home/avr32:/bin/sh
+default:x:1000:1000:Default non-root user:/home/default:/bin/sh
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/proftpd.conf b/target/device/Atmel/atstk1005/target_skeleton/etc/proftpd.conf
new file mode 100644
index 000000000..86b447d37
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/proftpd.conf
@@ -0,0 +1,31 @@
+ServerName			"ATSTK1002 FTP server"
+ServerType			standalone
+DefaultServer			on
+
+# Port 21 is the standard FTP port.
+Port				21
+
+# Umask 022 is a good standard umask to prevent new dirs and files
+# from being group and world writable.
+Umask				022
+
+# Note that this ONLY works in standalone mode, in inetd mode you should use an
+# inetd server that allows you to limit maximum number of processes per service
+# (such as inetd).
+MaxInstances			5
+
+# Set the user and group under which the server will run.
+User				nobody
+Group				nogroup
+
+# To cause every FTP user to be "jailed" (chrooted) into their home
+# directory, uncomment this line.
+#DefaultRoot ~
+
+# Normally, we want files to be overwriteable.
+AllowOverwrite		on
+
+# Deny use of SITE CHMOD, uncomment the three lines below.
+#<Limit SITE_CHMOD>
+#  DenyAll
+#</Limit>
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/protocols b/target/device/Atmel/atstk1005/target_skeleton/etc/protocols
new file mode 100644
index 000000000..1521f3980
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/protocols
@@ -0,0 +1,149 @@
+# /etc/protocols:
+# $Id: protocols,v 1.3 2001/07/07 07:07:15 nalin Exp $
+#
+# Internet (IP) protocols
+#
+#	from: @(#)protocols	5.1 (Berkeley) 4/17/89
+#
+# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
+#
+# See also http://www.iana.org/assignments/protocol-numbers
+
+ip	0	IP		# internet protocol, pseudo protocol number
+#hopopt	0	HOPOPT		# hop-by-hop options for ipv6
+icmp	1	ICMP		# internet control message protocol
+igmp	2	IGMP		# internet group management protocol
+ggp	3	GGP		# gateway-gateway protocol
+ipencap	4	IP-ENCAP	# IP encapsulated in IP (officially ``IP'')
+st	5	ST		# ST datagram mode
+tcp	6	TCP		# transmission control protocol
+cbt	7	CBT		# CBT, Tony Ballardie <A.Ballardie@cs.ucl.ac.uk>
+egp	8	EGP		# exterior gateway protocol
+igp	9	IGP		# any private interior gateway (Cisco: for IGRP)
+bbn-rcc	10	BBN-RCC-MON	# BBN RCC Monitoring
+nvp	11	NVP-II		# Network Voice Protocol
+pup	12	PUP		# PARC universal packet protocol
+argus	13	ARGUS		# ARGUS
+emcon	14	EMCON		# EMCON
+xnet	15	XNET		# Cross Net Debugger
+chaos	16	CHAOS		# Chaos
+udp	17	UDP		# user datagram protocol
+mux	18	MUX		# Multiplexing protocol
+dcn	19	DCN-MEAS	# DCN Measurement Subsystems
+hmp	20	HMP		# host monitoring protocol
+prm	21	PRM		# packet radio measurement protocol
+xns-idp	22	XNS-IDP		# Xerox NS IDP
+trunk-1	23	TRUNK-1		# Trunk-1
+trunk-2	24	TRUNK-2		# Trunk-2
+leaf-1	25	LEAF-1		# Leaf-1
+leaf-2	26	LEAF-2		# Leaf-2
+rdp	27	RDP		# "reliable datagram" protocol
+irtp	28	IRTP		# Internet Reliable Transaction Protocol
+iso-tp4	29	ISO-TP4		# ISO Transport Protocol Class 4
+netblt	30	NETBLT		# Bulk Data Transfer Protocol
+mfe-nsp	31	MFE-NSP		# MFE Network Services Protocol
+merit-inp	32	MERIT-INP	# MERIT Internodal Protocol
+sep	33	SEP		# Sequential Exchange Protocol
+3pc	34	3PC		# Third Party Connect Protocol
+idpr	35	IDPR		# Inter-Domain Policy Routing Protocol
+xtp	36	XTP		# Xpress Tranfer Protocol
+ddp	37	DDP		# Datagram Delivery Protocol
+idpr-cmtp	38	IDPR-CMTP	# IDPR Control Message Transport Proto
+tp++	39	TP++		# TP++ Transport Protocol
+il	40	IL		# IL Transport Protocol
+ipv6	41	IPv6		# IPv6
+sdrp	42	SDRP		# Source Demand Routing Protocol
+ipv6-route	43	IPv6-Route 	# Routing Header for IPv6
+ipv6-frag	44	IPv6-Frag	# Fragment Header for IPv6
+idrp	45	IDRP		# Inter-Domain Routing Protocol
+rsvp	46	RSVP		# Resource ReSerVation Protocol
+gre	47	GRE		# Generic Routing Encapsulation
+mhrp	48	MHRP		# Mobile Host Routing Protocol
+bna	49	BNA		# BNA
+ipv6-crypt	50	IPv6-Crypt	# Encryption Header for IPv6
+ipv6-auth	51	IPv6-Auth	# Authentication Header for IPv6
+i-nlsp	52	I-NLSP		# Integrated Net Layer Security TUBA
+swipe	53	SWIPE		# IP with Encryption
+narp	54	NARP		# NBMA Address Resolution Protocol
+mobile	55	MOBILE		# IP Mobility
+tlsp	56	TLSP		# Transport Layer Security Protocol
+skip	57	SKIP		# SKIP
+ipv6-icmp	58	IPv6-ICMP	# ICMP for IPv6
+ipv6-nonxt	59	IPv6-NoNxt	# No Next Header for IPv6
+ipv6-opts	60	IPv6-Opts	# Destination Options for IPv6
+#	61			# any host internal protocol
+cftp	62	CFTP		# CFTP
+#	63			# any local network
+sat-expak	64	SAT-EXPAK	# SATNET and Backroom EXPAK
+kryptolan	65	KRYPTOLAN	# Kryptolan
+rvd	66	RVD		# MIT Remote Virtual Disk Protocol
+ippc	67	IPPC		# Internet Pluribus Packet Core
+#	68			# any distributed file system
+sat-mon	69	SAT-MON		# SATNET Monitoring
+visa	70	VISA		# VISA Protocol
+ipcv	71	IPCV		# Internet Packet Core Utility
+cpnx	72	CPNX		# Computer Protocol Network Executive
+cphb	73	CPHB		# Computer Protocol Heart Beat
+wsn	74	WSN		# Wang Span Network
+pvp	75	PVP		# Packet Video Protocol
+br-sat-mon	76	BR-SAT-MON	# Backroom SATNET Monitoring
+sun-nd	77	SUN-ND		# SUN ND PROTOCOL-Temporary
+wb-mon	78	WB-MON		# WIDEBAND Monitoring
+wb-expak	79	WB-EXPAK	# WIDEBAND EXPAK
+iso-ip	80	ISO-IP		# ISO Internet Protocol
+vmtp	81	VMTP		# Versatile Message Transport
+secure-vmtp	82	SECURE-VMTP	# SECURE-VMTP
+vines	83	VINES		# VINES
+ttp	84	TTP		# TTP
+nsfnet-igp	85	NSFNET-IGP	# NSFNET-IGP
+dgp	86	DGP		# Dissimilar Gateway Protocol
+tcf	87	TCF		# TCF
+eigrp	88	EIGRP		# Enhanced Interior Routing Protocol (Cisco)
+ospf	89	OSPFIGP		# Open Shortest Path First IGP
+sprite-rpc	90	Sprite-RPC	# Sprite RPC Protocol
+larp	91	LARP		# Locus Address Resolution Protocol
+mtp	92	MTP		# Multicast Transport Protocol
+ax.25	93	AX.25		# AX.25 Frames
+ipip	94	IPIP		# Yet Another IP encapsulation
+micp	95	MICP		# Mobile Internetworking Control Pro.
+scc-sp	96	SCC-SP		# Semaphore Communications Sec. Pro.
+etherip	97	ETHERIP		# Ethernet-within-IP Encapsulation
+encap	98	ENCAP		# Yet Another IP encapsulation
+#	99			# any private encryption scheme
+gmtp	100	GMTP		# GMTP
+ifmp	101	IFMP		# Ipsilon Flow Management Protocol
+pnni	102	PNNI		# PNNI over IP
+pim	103	PIM		# Protocol Independent Multicast
+aris	104	ARIS		# ARIS
+scps	105	SCPS		# SCPS
+qnx	106	QNX		# QNX
+a/n	107	A/N		# Active Networks
+ipcomp	108	IPComp		# IP Payload Compression Protocol
+snp	109	SNP		# Sitara Networks Protocol
+compaq-peer	110	Compaq-Peer	# Compaq Peer Protocol
+ipx-in-ip	111	IPX-in-IP	# IPX in IP
+vrrp	112	VRRP		# Virtual Router Redundancy Protocol
+pgm	113	PGM		# PGM Reliable Transport Protocol
+#	114			# any 0-hop protocol
+l2tp	115	L2TP		# Layer Two Tunneling Protocol
+ddx	116	DDX		# D-II Data Exchange
+iatp	117	IATP		# Interactive Agent Transfer Protocol
+stp	118	STP		# Schedule Transfer
+srp	119	SRP		# SpectraLink Radio Protocol
+uti	120	UTI		# UTI
+smp	121	SMP		# Simple Message Protocol
+sm	122	SM		# SM
+ptp	123	PTP		# Performance Transparency Protocol
+isis	124	ISIS		# ISIS over IPv4
+fire	125	FIRE
+crtp	126	CRTP		# Combat Radio Transport Protocol
+crdup	127	CRUDP		# Combat Radio User Datagram
+sscopmce	128	SSCOPMCE
+iplt	129	IPLT
+sps	130	SPS		# Secure Packet Shield
+pipe	131	PIPE		# Private IP Encapsulation within IP
+sctp	132	SCTP		# Stream Control Transmission Protocol
+fc	133	FC		# Fibre Channel
+# rsvp-e2e-ignore	134	RSVP-E2E-IGNORE
+#	134-254			# Unassigned
+#	255			# Reserved
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/resolv.conf b/target/device/Atmel/atstk1005/target_skeleton/etc/resolv.conf
new file mode 100644
index 000000000..71f6f9657
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/resolv.conf
@@ -0,0 +1 @@
+../tmp/resolv.conf
\ No newline at end of file
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/samba/smb.conf b/target/device/Atmel/atstk1005/target_skeleton/etc/samba/smb.conf
new file mode 100644
index 000000000..a29571894
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/samba/smb.conf
@@ -0,0 +1,287 @@
+# This is the main Samba configuration file. You should read the
+# smb.conf(5) manual page in order to understand the options listed
+# here. Samba has a huge number of configurable options (perhaps too
+# many!) most of which are not shown in this example
+#
+# For a step to step guide on installing, configuring and using samba,
+# read the Samba-HOWTO-Collection. This may be obtained from:
+#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
+#
+# Many working examples of smb.conf files can be found in the
+# Samba-Guide which is generated daily and can be downloaded from:
+#  http://www.samba.org/samba/docs/Samba-Guide.pdf
+#
+# Any line which starts with a ; (semi-colon) or a # (hash)
+# is a comment and is ignored. In this example we will use a #
+# for commentry and a ; for parts of the config file that you
+# may wish to enable
+#
+# NOTE: Whenever you modify this file you should run the command "testparm"
+# to check that you have not made any basic syntactic errors.
+#
+#======================= Global Settings =====================================
+[global]
+
+# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
+   workgroup = AVR32
+
+# Network name
+   netbios name = stk1000
+
+# server string is the equivalent of the NT Description field
+   server string = AVR32 STK1000 development kit
+
+# Security mode. Defines in which mode Samba will operate. Possible
+# values are share, user, server, domain and ads. Most people will want
+# user level security. See the Samba-HOWTO-Collection for details.
+   security = user
+
+# This option is important for security. It allows you to restrict
+# connections to machines which are on your local network. The
+# following example restricts access to two C class networks and
+# the "loopback" interface. For more examples of the syntax see
+# the smb.conf man page
+   hosts allow = 10.0.0. 127.
+
+# If you want to automatically load your printer list rather
+# than setting them up individually then you'll need this
+   load printers = no
+
+# you may wish to override the location of the printcap file
+;   printcap name = /etc/printcap
+
+# on SystemV system setting printcap name to lpstat should allow
+# you to automatically obtain a printer list from the SystemV spool
+# system
+;   printcap name = lpstat
+
+# It should not be necessary to specify the print system type unless
+# it is non-standard. Currently supported print systems include:
+# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
+;   printing = cups
+
+# Uncomment this if you want a guest account, you must add this to /etc/passwd
+# otherwise the user "nobody" is used
+;  guest account = pcguest
+
+# this tells Samba to use a separate log file for each machine
+# that connects
+   log file = /var/log/samba/log.%m
+   debug level = 1
+   syslog = 0
+
+# Put a capping on the size of the log files (in Kb).
+   max log size = 1000
+
+# Use password server option only with security = server
+# The argument list may include:
+#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
+# or to auto-locate the domain controller/s
+#   password server = *
+;   password server = <NT-Server-Name>
+
+# Use the realm option only with security = ads
+# Specifies the Active Directory realm the host is part of
+;   realm = MY_REALM
+
+# Backend to store user information in. New installations should
+# use either tdbsam or ldapsam. smbpasswd is available for backwards
+# compatibility. tdbsam requires no further configuration.
+   passdb backend = smbpasswd:/etc/samba/smbpasswd
+
+# Using the following line enables you to customise your configuration
+# on a per machine basis. The %m gets replaced with the netbios name
+# of the machine that is connecting.
+# Note: Consider carefully the location in the configuration file of
+#       this line.  The included file is read at that point.
+;   include = /usr/local/samba/lib/smb.conf.%m
+
+# Configure Samba to use multiple interfaces
+# If you have multiple network interfaces then you must list them
+# here. See the man page for details.
+   interfaces = lo eth0
+
+   socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
+
+# Browser Control Options:
+# set local master to no if you don't want Samba to become a master
+# browser on your network. Otherwise the normal election rules apply
+   local master = yes
+
+# OS Level determines the precedence of this server in master browser
+# elections. The default value should be reasonable
+   os level = 254
+
+# Domain Master specifies Samba to be the Domain Master Browser. This
+# allows Samba to collate browse lists between subnets. Don't use this
+# if you already have a Windows NT domain controller doing this job
+   domain master = yes
+
+# Preferred Master causes Samba to force a local browser election on startup
+# and gives it a slightly higher chance of winning the election
+   preferred master = yes
+
+# Enable this if you want Samba to be a domain logon server for
+# Windows95 workstations.
+;   domain logons = yes
+
+# if you enable domain logons then you may want a per-machine or
+# per user logon script
+# run a specific logon batch file per workstation (machine)
+;   logon script = %m.bat
+# run a specific logon batch file per username
+;   logon script = %U.bat
+
+# Where to store roving profiles (only for Win95 and WinNT)
+#        %L substitutes for this servers netbios name, %U is username
+#        You must uncomment the [Profiles] share below
+;   logon path = \\%L\Profiles\%U
+
+# Windows Internet Name Serving Support Section:
+# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
+;   wins support = yes
+
+# WINS Server - Tells the NMBD components of Samba to be a WINS Client
+#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
+;   wins server = w.x.y.z
+
+# WINS Proxy - Tells Samba to answer name resolution queries on
+# behalf of a non WINS capable client, for this to work there must be
+# at least one	WINS Server on the network. The default is NO.
+;   wins proxy = yes
+
+# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
+# via DNS nslookups. The default is NO.
+   dns proxy = no
+
+# These scripts are used on a domain controller or stand-alone
+# machine to add or delete corresponding unix accounts
+;  add user script = /usr/sbin/useradd %u
+;  add group script = /usr/sbin/groupadd %g
+;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
+;  delete user script = /usr/sbin/userdel %u
+;  delete user from group script = /usr/sbin/deluser %u %g
+;  delete group script = /usr/sbin/groupdel %g
+
+# Unix charset on the filesystem
+   unix charset = iso8859-1
+
+# Code page for the client
+#   client code page = 850
+
+#============================ Share Definitions ==============================
+[homes]
+   comment = Home Directories
+   browseable = no
+   writable = yes
+
+[netdisk]
+   comment = Network share on STK1000
+   path = /media
+   read only = no
+   public = yes
+
+# Un-comment the following and create the netlogon directory for Domain Logons
+; [netlogon]
+;   comment = Network Logon Service
+;   path = /usr/local/samba/lib/netlogon
+;   guest ok = yes
+;   writable = no
+;   share modes = no
+
+
+# Un-comment the following to provide a specific roving profile share
+# the default is to use the user's home directory
+;[Profiles]
+;    path = /usr/local/samba/profiles
+;    browseable = no
+;    guest ok = yes
+
+
+# NOTE: If you have a BSD-style print system there is no need to
+# specifically define each individual printer
+;[printers]
+;   comment = All Printers
+;   path = /usr/spool/samba
+;   browseable = no
+# Set public = yes to allow user 'guest account' to print
+;   guest ok = no
+;   writable = no
+;   printable = yes
+
+# This one is useful for people to share files
+;[tmp]
+;   comment = Temporary file space
+;   path = /tmp
+;   read only = no
+;   public = yes
+
+# A publicly accessible directory, but read only, except for people in
+# the "staff" group
+;[public]
+;   comment = Public Stuff
+;   path = /home/samba
+;   public = yes
+;   writable = yes
+;   printable = no
+;   write list = @staff
+
+# Other examples.
+#
+# A private printer, usable only by fred. Spool data will be placed in fred's
+# home directory. Note that fred must have write access to the spool directory,
+# wherever it is.
+;[fredsprn]
+;   comment = Fred's Printer
+;   valid users = fred
+;   path = /homes/fred
+;   printer = freds_printer
+;   public = no
+;   writable = no
+;   printable = yes
+
+# A private directory, usable only by fred. Note that fred requires write
+# access to the directory.
+;[fredsdir]
+;   comment = Fred's Service
+;   path = /usr/somewhere/private
+;   valid users = fred
+;   public = no
+;   writable = yes
+;   printable = no
+
+# a service which has a different directory for each machine that connects
+# this allows you to tailor configurations to incoming machines. You could
+# also use the %U option to tailor it by user name.
+# The %m gets replaced with the machine name that is connecting.
+;[pchome]
+;  comment = PC Directories
+;  path = /usr/pc/%m
+;  public = no
+;  writable = yes
+
+# A publicly accessible directory, read/write to all users. Note that all files
+# created in the directory by users will be owned by the default user, so
+# any user with access can delete any other user's files. Obviously this
+# directory must be writable by the default user. Another user could of course
+# be specified, in which case all files would be owned by that user instead.
+;[public]
+;   path = /usr/somewhere/else/public
+;   public = yes
+;   only guest = yes
+;   writable = yes
+;   printable = no
+
+# The following two entries demonstrate how to share a directory so that two
+# users can place files there that will be owned by the specific users. In this
+# setup, the directory should be writable by both users and should have the
+# sticky bit set on it to prevent abuse. Obviously this could be extended to
+# as many users as required.
+;[myshare]
+;   comment = Mary's and Fred's stuff
+;   path = /usr/somewhere/shared
+;   valid users = mary fred
+;   public = no
+;   writable = yes
+;   printable = no
+;   create mask = 0765
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/samba/smbpasswd b/target/device/Atmel/atstk1005/target_skeleton/etc/samba/smbpasswd
new file mode 100644
index 000000000..a3fe520d5
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/samba/smbpasswd
@@ -0,0 +1 @@
+root:0:172DC9BBE870E1B6AAD3B435B51404EE:090A846DE05FDBC2D90864D49620FD7C:[U          ]:LCT-4561C217:
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/services b/target/device/Atmel/atstk1005/target_skeleton/etc/services
new file mode 100644
index 000000000..e2ffd3df5
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/services
@@ -0,0 +1,2117 @@
+#
+# Network services, Internet style
+#
+# Note that it is presently the policy of IANA to assign a single well-known
+# port number for both TCP and UDP; hence, most entries here have two entries
+# even if the protocol doesn't support UDP operations.
+#
+# The latest IANA port assignments can be gotten from
+#
+#	http://www.iana.org/assignments/port-numbers
+#
+# The Well Known Ports are those from 0 through 1023.
+# The Registered Ports are those from 1024 through 49151
+# The Dynamic and/or Private Ports are those from 49152 through 65535
+#
+# Kerberos services are for Kerberos v4, and are unofficial.  Sites running
+# v5 should uncomment v5 entries and comment v4 entries.
+#
+# $FreeBSD: src/etc/services,v 1.102.8.1 2006/01/29 11:32:48 maxim Exp $
+#	From: @(#)services	5.8 (Berkeley) 5/9/91
+#
+# WELL KNOWN PORT NUMBERS
+#
+rtmp		  1/ddp	   #Routing Table Maintenance Protocol
+tcpmux		  1/tcp	   #TCP Port Service Multiplexer
+tcpmux		  1/udp	   #TCP Port Service Multiplexer
+nbp		  2/ddp	   #Name Binding Protocol
+compressnet	  2/tcp	   #Management Utility
+compressnet	  2/udp	   #Management Utility
+compressnet	  3/tcp	   #Compression Process
+compressnet	  3/udp	   #Compression Process
+echo		  4/ddp	   #AppleTalk Echo Protocol
+rje		  5/tcp	   #Remote Job Entry
+rje		  5/udp	   #Remote Job Entry
+zip		  6/ddp	   #Zone Information Protocol
+echo		  7/tcp
+echo		  7/udp
+discard		  9/tcp	   sink null
+discard		  9/udp	   sink null
+systat		 11/tcp	   users	#Active Users
+systat		 11/udp	   users	#Active Users
+daytime		 13/tcp
+daytime		 13/udp
+qotd		 17/tcp	   quote	#Quote of the Day
+qotd		 17/udp	   quote	#Quote of the Day
+msp		 18/tcp	   #Message Send Protocol
+msp		 18/udp	   #Message Send Protocol
+chargen		 19/tcp	   ttytst source	#Character Generator
+chargen		 19/udp	   ttytst source	#Character Generator
+ftp-data	 20/tcp	   #File Transfer [Default Data]
+ftp-data	 20/udp	   #File Transfer [Default Data]
+ftp		 21/tcp	   #File Transfer [Control]
+ftp		 21/udp	   #File Transfer [Control]
+ssh		 22/tcp	   #Secure Shell Login
+ssh		 22/udp	   #Secure Shell Login
+telnet		 23/tcp
+telnet		 23/udp
+#		 24/tcp	   any private mail system
+#		 24/udp	   any private mail system
+smtp		 25/tcp	   mail		#Simple Mail Transfer
+smtp		 25/udp	   mail		#Simple Mail Transfer
+nsw-fe		 27/tcp	   #NSW User System FE
+nsw-fe		 27/udp	   #NSW User System FE
+msg-icp		 29/tcp	   #MSG ICP
+msg-icp		 29/udp	   #MSG ICP
+msg-auth	 31/tcp	   #MSG Authentication
+msg-auth	 31/udp	   #MSG Authentication
+dsp		 33/tcp	   #Display Support Protocol
+dsp		 33/udp	   #Display Support Protocol
+#		 35/tcp	   any private printer server
+#		 35/udp	   any private printer server
+time		 37/tcp	   timserver
+time		 37/udp	   timserver
+rap		 38/tcp	   #Route Access Protocol
+rap		 38/udp	   #Route Access Protocol
+rlp		 39/tcp	   resource	#Resource Location Protocol
+rlp		 39/udp	   resource	#Resource Location Protocol
+graphics	 41/tcp
+graphics	 41/udp
+nameserver	 42/tcp	   name		#Host Name Server
+nameserver	 42/udp	   name		#Host Name Server
+nicname		 43/tcp	   whois
+nicname		 43/udp	   whois
+mpm-flags	 44/tcp	   #MPM FLAGS Protocol
+mpm-flags	 44/udp	   #MPM FLAGS Protocol
+mpm		 45/tcp	   #Message Processing Module [recv]
+mpm		 45/udp	   #Message Processing Module [recv]
+mpm-snd		 46/tcp	   #MPM [default send]
+mpm-snd		 46/udp	   #MPM [default send]
+ni-ftp		 47/tcp	   #NI FTP
+ni-ftp		 47/udp	   #NI FTP
+auditd		 48/tcp	   #Digital Audit Daemon
+auditd		 48/udp	   #Digital Audit Daemon
+tacacs		 49/tcp	   #Login Host Protocol (TACACS)
+tacacs		 49/udp	   #Login Host Protocol (TACACS)
+re-mail-ck	 50/tcp	   #Remote Mail Checking Protocol
+re-mail-ck	 50/udp	   #Remote Mail Checking Protocol
+la-maint	 51/tcp	   #IMP Logical Address Maintenance
+la-maint	 51/udp	   #IMP Logical Address Maintenance
+xns-time	 52/tcp	   #XNS Time Protocol
+xns-time	 52/udp	   #XNS Time Protocol
+domain		 53/tcp	   #Domain Name Server
+domain		 53/udp	   #Domain Name Server
+xns-ch		 54/tcp	   #XNS Clearinghouse
+xns-ch		 54/udp	   #XNS Clearinghouse
+isi-gl		 55/tcp	   #ISI Graphics Language
+isi-gl		 55/udp	   #ISI Graphics Language
+xns-auth	 56/tcp	   #XNS Authentication
+xns-auth	 56/udp	   #XNS Authentication
+mtp		 57/tcp	   # deprecated
+#PROBLEMS!==============================================================
+#		 57/tcp	   any private terminal access
+#PROBLEMS!==============================================================
+#		 57/udp	   any private terminal access
+xns-mail	 58/tcp	   #XNS Mail
+xns-mail	 58/udp	   #XNS Mail
+#		 59/tcp	   any private file service
+#		 59/udp	   any private file service
+ni-mail		 61/tcp	   #NI MAIL
+ni-mail		 61/udp	   #NI MAIL
+acas		 62/tcp	   #ACA Services
+acas		 62/udp	   #ACA Services
+whois++		 63/tcp
+whois++		 63/udp
+covia		 64/tcp	   #Communications Integrator (CI)
+covia		 64/udp	   #Communications Integrator (CI)
+tacacs-ds	 65/tcp	   #TACACS-Database Service
+tacacs-ds	 65/udp	   #TACACS-Database Service
+sql*net		 66/tcp	   #Oracle SQL*NET
+sql*net		 66/udp	   #Oracle SQL*NET
+bootps		 67/tcp	   dhcps	#Bootstrap Protocol Server
+bootps		 67/udp	   dhcps	#Bootstrap Protocol Server
+bootpc		 68/tcp	   dhcpc	#Bootstrap Protocol Client
+bootpc		 68/udp	   dhcpc	#Bootstrap Protocol Client
+tftp		 69/tcp	   #Trivial File Transfer
+tftp		 69/udp	   #Trivial File Transfer
+gopher		 70/tcp
+gopher		 70/udp
+netrjs-1	 71/tcp	   #Remote Job Service
+netrjs-1	 71/udp	   #Remote Job Service
+netrjs-2	 72/tcp	   #Remote Job Service
+netrjs-2	 72/udp	   #Remote Job Service
+netrjs-3	 73/tcp	   #Remote Job Service
+netrjs-3	 73/udp	   #Remote Job Service
+netrjs-4	 74/tcp	   #Remote Job Service
+netrjs-4	 74/udp	   #Remote Job Service
+#		 75/tcp	   any private dial out service
+#		 75/udp	   any private dial out service
+deos		 76/tcp	   #Distributed External Object Store
+deos		 76/udp	   #Distributed External Object Store
+netrjs		 77/tcp
+#PROBLEMS!==============================================================
+#		 77/tcp	   any private RJE service
+#PROBLEMS!==============================================================
+#		 77/udp	   any private RJE service
+vettcp		 78/tcp
+vettcp		 78/udp
+finger		 79/tcp
+finger		 79/udp
+http		 80/tcp	   www www-http	#World Wide Web HTTP
+http		 80/udp	   www www-http	#World Wide Web HTTP
+hosts2-ns	 81/tcp	   #HOSTS2 Name Server
+hosts2-ns	 81/udp	   #HOSTS2 Name Server
+xfer		 82/tcp	   #XFER Utility
+xfer		 82/udp	   #XFER Utility
+mit-ml-dev	 83/tcp	   #MIT ML Device
+mit-ml-dev	 83/udp	   #MIT ML Device
+ctf		 84/tcp	   #Common Trace Facility
+ctf		 84/udp	   #Common Trace Facility
+mit-ml-dev	 85/tcp	   #MIT ML Device
+mit-ml-dev	 85/udp	   #MIT ML Device
+mfcobol		 86/tcp	   #Micro Focus Cobol
+mfcobol		 86/udp	   #Micro Focus Cobol
+ttylink		 87/tcp
+#PROBLEMS!===========================================================
+#		 87/tcp	   any private terminal link
+#PROBLEMS!===========================================================
+#		 87/udp	   any private terminal link
+kerberos-sec	 88/tcp	   kerberos	# krb5	# Kerberos (v5)
+kerberos-sec	 88/udp	   kerberos	# krb5	# Kerberos (v5)
+su-mit-tg	 89/tcp	   #SU/MIT Telnet Gateway
+su-mit-tg	 89/udp	   #SU/MIT Telnet Gateway
+dnsix		 90/tcp	   #DNSIX Securit Attribute Token Map
+dnsix		 90/udp	   #DNSIX Securit Attribute Token Map
+mit-dov		 91/tcp	   #MIT Dover Spooler
+mit-dov		 91/udp	   #MIT Dover Spooler
+npp		 92/tcp	   #Network Printing Protocol
+npp		 92/udp	   #Network Printing Protocol
+dcp		 93/tcp	   #Device Control Protocol
+dcp		 93/udp	   #Device Control Protocol
+objcall		 94/tcp	   #Tivoli Object Dispatcher
+objcall		 94/udp	   #Tivoli Object Dispatcher
+supdup		 95/tcp
+supdup		 95/udp
+dixie		 96/tcp	   #DIXIE Protocol Specification
+dixie		 96/udp	   #DIXIE Protocol Specification
+swift-rvf	 97/tcp	   #Swift Remote Virtural File Protocol
+swift-rvf	 97/udp	   #Swift Remote Virtural File Protocol
+tacnews		 98/tcp	   #TAC News, Unofficial: Red Hat linuxconf
+tacnews		 98/udp	   #TAC News, Unofficial: Red Hat linuxconf
+metagram	 99/tcp	   #Metagram Relay
+metagram	 99/udp	   #Metagram Relay
+newacct		100/tcp	   #[unauthorized use]
+hostname	101/tcp	   hostnames	#NIC Host Name Server
+hostname	101/udp	   hostnames	#NIC Host Name Server
+iso-tsap	102/tcp	   tsap		#ISO-TSAP Class 0
+iso-tsap	102/udp	   tsap		#ISO-TSAP Class 0
+gppitnp		103/tcp	   #Genesis Point-to-Point Trans Net
+gppitnp		103/udp	   #Genesis Point-to-Point Trans Net
+acr-nema	104/tcp	   #ACR-NEMA Digital Imag. & Comm. 300
+acr-nema	104/udp	   #ACR-NEMA Digital Imag. & Comm. 300
+csnet-ns	105/tcp	   cso-ns cso	#Mailbox Name Nameserver
+csnet-ns	105/udp	   cso-ns cso	#Mailbox Name Nameserver
+pop3pw		106/tcp	   3com-tsmux	#Eudora compatible PW changer
+3com-tsmux	106/udp
+rtelnet		107/tcp	   #Remote Telnet Service
+rtelnet		107/udp	   #Remote Telnet Service
+snagas		108/tcp	   #SNA Gateway Access Server
+snagas		108/udp	   #SNA Gateway Access Server
+pop2		109/tcp	   postoffice	#Post Office Protocol - Version 2
+pop2		109/udp	   postoffice	#Post Office Protocol - Version 2
+pop3		110/tcp	   #Post Office Protocol - Version 3
+pop3		110/udp	   #Post Office Protocol - Version 3
+sunrpc		111/tcp	   rpcbind	#SUN Remote Procedure Call
+sunrpc		111/udp	   rpcbind	#SUN Remote Procedure Call
+mcidas		112/tcp	   #McIDAS Data Transmission Protocol
+mcidas		112/udp	   #McIDAS Data Transmission Protocol
+auth		113/tcp	   ident tap	#Authentication Service
+auth		113/udp	   ident tap	#Authentication Service
+audionews	114/tcp	   #Audio News Multicast
+audionews	114/udp	   #Audio News Multicast
+sftp		115/tcp	   #Simple File Transfer Protocol
+sftp		115/udp	   #Simple File Transfer Protocol
+ansanotify	116/tcp	   #ANSA REX Notify
+ansanotify	116/udp	   #ANSA REX Notify
+uucp-path	117/tcp	   #UUCP Path Service
+uucp-path	117/udp	   #UUCP Path Service
+sqlserv		118/tcp	   #SQL Services
+sqlserv		118/udp	   #SQL Services
+nntp		119/tcp	   usenet	#Network News Transfer Protocol
+nntp		119/udp	   usenet	#Network News Transfer Protocol
+cfdptkt		120/tcp
+cfdptkt		120/udp
+erpc		121/tcp	   #Encore Expedited Remote Pro.Call
+erpc		121/udp	   #Encore Expedited Remote Pro.Call
+smakynet	122/tcp
+smakynet	122/udp
+ntp		123/tcp	   #Network Time Protocol
+ntp		123/udp	   #Network Time Protocol
+ansatrader	124/tcp	   #ANSA REX Trader
+ansatrader	124/udp	   #ANSA REX Trader
+locus-map	125/tcp	   #Locus PC-Interface Net Map Ser
+locus-map	125/udp	   #Locus PC-Interface Net Map Ser
+unitary		126/tcp	   #Unisys Unitary Login
+unitary		126/udp	   #Unisys Unitary Login
+locus-con	127/tcp	   #Locus PC-Interface Conn Server
+locus-con	127/udp	   #Locus PC-Interface Conn Server
+gss-xlicen	128/tcp	   #GSS X License Verification
+gss-xlicen	128/udp	   #GSS X License Verification
+pwdgen		129/tcp	   #Password Generator Protocol
+pwdgen		129/udp	   #Password Generator Protocol
+cisco-fna	130/tcp	   #cisco FNATIVE
+cisco-fna	130/udp	   #cisco FNATIVE
+cisco-tna	131/tcp	   #cisco TNATIVE
+cisco-tna	131/udp	   #cisco TNATIVE
+cisco-sys	132/tcp	   #cisco SYSMAINT
+cisco-sys	132/udp	   #cisco SYSMAINT
+statsrv		133/tcp	   #Statistics Service
+statsrv		133/udp	   #Statistics Service
+ingres-net	134/tcp	   #INGRES-NET Service
+ingres-net	134/udp	   #INGRES-NET Service
+loc-srv		135/tcp	   epmap	#Location Service
+loc-srv		135/udp	   epmap	#Location Service
+profile		136/tcp	   #PROFILE Naming System
+profile		136/udp	   #PROFILE Naming System
+netbios-ns	137/tcp	   #NETBIOS Name Service
+netbios-ns	137/udp	   #NETBIOS Name Service
+netbios-dgm	138/tcp	   #NETBIOS Datagram Service
+netbios-dgm	138/udp	   #NETBIOS Datagram Service
+netbios-ssn	139/tcp	   #NETBIOS Session Service
+netbios-ssn	139/udp	   #NETBIOS Session Service
+emfis-data	140/tcp	   #EMFIS Data Service
+emfis-data	140/udp	   #EMFIS Data Service
+emfis-cntl	141/tcp	   #EMFIS Control Service
+emfis-cntl	141/udp	   #EMFIS Control Service
+bl-idm		142/tcp	   #Britton-Lee IDM
+bl-idm		142/udp	   #Britton-Lee IDM
+imap		143/tcp	   imap2 imap4	#Interim Mail Access Protocol v2
+imap		143/udp	   imap2 imap4	#Interim Mail Access Protocol v2
+NeWS		144/tcp	   # Window System
+NeWS		144/udp	   # Window System
+#PROBLEMS!==============================================================
+#uma		144/tcp	   #Universal Management Architecture
+#uma		144/udp	   #Universal Management Architecture
+#PROBLEMS!==============================================================
+uaac		145/tcp	   #UAAC Protocol
+uaac		145/udp	   #UAAC Protocol
+iso-tp0		146/tcp
+iso-tp0		146/udp
+iso-ip		147/tcp
+iso-ip		147/udp
+cronus		148/tcp	   jargon	#CRONUS-SUPPORT
+cronus		148/udp	   jargon	#CRONUS-SUPPORT
+aed-512		149/tcp	   #AED 512 Emulation Service
+aed-512		149/udp	   #AED 512 Emulation Service
+sql-net		150/tcp
+sql-net		150/udp
+hems		151/tcp
+hems		151/udp
+bftp		152/tcp	   #Background File Transfer Program
+bftp		152/udp	   #Background File Transfer Program
+sgmp		153/tcp
+sgmp		153/udp
+netsc-prod	154/tcp
+netsc-prod	154/udp
+netsc-dev	155/tcp
+netsc-dev	155/udp
+sqlsrv		156/tcp	   #SQL Service
+sqlsrv		156/udp	   #SQL Service
+knet-cmp	157/tcp	   #KNET/VM Command/Message Protocol
+knet-cmp	157/udp	   #KNET/VM Command/Message Protocol
+pcmail-srv	158/tcp	   #PCMail Server
+pcmail-srv	158/udp	   #PCMail Server
+nss-routing	159/tcp
+nss-routing	159/udp
+sgmp-traps	160/tcp
+sgmp-traps	160/udp
+snmp		161/tcp
+snmp		161/udp
+snmptrap	162/tcp	   snmp-trap
+snmptrap	162/udp	   snmp-trap
+cmip-man	163/tcp	   #CMIP/TCP Manager
+cmip-man	163/udp	   #CMIP/TCP Manager
+cmip-agent	164/tcp	   #CMIP/TCP Agent
+smip-agent	164/udp	   #CMIP/TCP Agent
+xns-courier	165/tcp	   #Xerox
+xns-courier	165/udp	   #Xerox
+s-net		166/tcp	   #Sirius Systems
+s-net		166/udp	   #Sirius Systems
+namp		167/tcp
+namp		167/udp
+rsvd		168/tcp
+rsvd		168/udp
+send		169/tcp
+send		169/udp
+print-srv	170/tcp	   #Network PostScript
+print-srv	170/udp	   #Network PostScript
+multiplex	171/tcp	   #Network Innovations Multiplex
+multiplex	171/udp	   #Network Innovations Multiplex
+cl/1		172/tcp	   #Network Innovations CL/1
+cl/1		172/udp	   #Network Innovations CL/1
+xyplex-mux	173/tcp
+xyplex-mux	173/udp
+mailq		174/tcp
+mailq		174/udp
+vmnet		175/tcp
+vmnet		175/udp
+genrad-mux	176/tcp
+genrad-mux	176/udp
+xdmcp		177/tcp	   #X Display Manager Control Protocol
+xdmcp		177/udp	   #X Display Manager Control Protocol
+NextStep	178/tcp	   nextstep NeXTStep	#NextStep Window Server
+NextStep	178/udp	   nextstep NeXTStep	#NextStep Window Server
+bgp		179/tcp	   #Border Gateway Protocol
+bgp		179/udp	   #Border Gateway Protocol
+ris		180/tcp	   #Intergraph
+ris		180/udp	   #Intergraph
+unify		181/tcp
+unify		181/udp
+audit		182/tcp	   #Unisys Audit SITP
+audit		182/udp	   #Unisys Audit SITP
+ocbinder	183/tcp
+ocbinder	183/udp
+ocserver	184/tcp
+ocserver	184/udp
+remote-kis	185/tcp
+remote-kis	185/udp
+kis		186/tcp	   #KIS Protocol
+kis		186/udp	   #KIS Protocol
+aci		187/tcp	   #Application Communication Interface
+aci		187/udp	   #Application Communication Interface
+mumps		188/tcp	   #Plus Five's MUMPS
+mumps		188/udp	   #Plus Five's MUMPS
+qft		189/tcp	   #Queued File Transport
+qft		189/udp	   #Queued File Transport
+gacp		190/tcp	   #Gateway Access Control Protocol
+gacp		190/udp	   cacp		#Gateway Access Control Protocol
+prospero	191/tcp	   #Prospero Directory Service
+prospero	191/udp	   #Prospero Directory Service
+osu-nms		192/tcp	   #OSU Network Monitoring System
+osu-nms		192/udp	   #OSU Network Monitoring System
+srmp		193/tcp	   #Spider Remote Monitoring Protocol
+srmp		193/udp	   #Spider Remote Monitoring Protocol
+irc		194/tcp	   #Internet Relay Chat Protocol
+irc		194/udp	   #Internet Relay Chat Protocol
+dn6-nlm-aud	195/tcp	   #DNSIX Network Level Module Audit
+dn6-nlm-aud	195/udp	   #DNSIX Network Level Module Audit
+dn6-smm-red	196/tcp	   #DNSIX Session Mgt Module Audit Redir
+dn6-smm-red	196/udp	   #DNSIX Session Mgt Module Audit Redir
+dls		197/tcp	   #Directory Location Service
+dls		197/udp	   #Directory Location Service
+dls-mon		198/tcp	   #Directory Location Service Monitor
+dls-mon		198/udp	   #Directory Location Service Monitor
+smux		199/tcp
+smux		199/udp
+src		200/tcp	   #IBM System Resource Controller
+src		200/udp	   #IBM System Resource Controller
+at-rtmp		201/tcp	   #AppleTalk Routing Maintenance
+at-rtmp		201/udp	   #AppleTalk Routing Maintenance
+at-nbp		202/tcp	   #AppleTalk Name Binding
+at-nbp		202/udp	   #AppleTalk Name Binding
+at-3		203/tcp	   #AppleTalk Unused
+at-3		203/udp	   #AppleTalk Unused
+at-echo		204/tcp	   #AppleTalk Echo
+at-echo		204/udp	   #AppleTalk Echo
+at-5		205/tcp	   #AppleTalk Unused
+at-5		205/udp	   #AppleTalk Unused
+at-zis		206/tcp	   #AppleTalk Zone Information
+at-zis		206/udp	   #AppleTalk Zone Information
+at-7		207/tcp	   #AppleTalk Unused
+at-7		207/udp	   #AppleTalk Unused
+at-8		208/tcp	   #AppleTalk Unused
+at-8		208/udp	   #AppleTalk Unused
+qmtp		209/tcp	   #The Quick Mail Transfer Protocol
+qmtp		209/udp	   #The Quick Mail Transfer Protocol
+#PROBLEMS!==============================================================
+#tam		209/tcp	   #Trivial Authenticated Mail Protocol
+#tam		209/udp	   #Trivial Authenticated Mail Protocol
+#PROBLEMS!==============================================================
+z39.50		210/tcp	   wais		#ANSI Z39.50
+z39.50		210/udp	   wais		#ANSI Z39.50
+914c/g		211/tcp	   #Texas Instruments 914C/G Terminal
+914c/g		211/udp	   #Texas Instruments 914C/G Terminal
+anet		212/tcp	   #ATEXSSTR
+anet		212/udp	   #ATEXSSTR
+ipx		213/tcp
+ipx		213/udp
+vmpwscs		214/tcp
+vmpwscs		214/udp
+softpc		215/tcp	   #Insignia Solutions
+softpc		215/udp	   #Insignia Solutions
+CAIlic		216/tcp	   atls		#Computer Associates Int'l License Server
+CAIlic		216/udp	   atls		#Computer Associates Int'l License Server
+dbase		217/tcp	   #dBASE Unix
+dbase		217/udp	   #dBASE Unix
+mpp		218/tcp	   #Netix Message Posting Protocol
+mpp		218/udp	   #Netix Message Posting Protocol
+uarps		219/tcp	   #Unisys ARPs
+uarps		219/udp	   #Unisys ARPs
+#imap3@220 was never used and never should have been allocated. See PR 46294.
+#imap3		220/tcp	   #Interactive Mail Access Protocol v3
+#imap3		220/udp	   #Interactive Mail Access Protocol v3
+fln-spx		221/tcp	   #Berkeley rlogind with SPX auth
+fln-spx		221/udp	   #Berkeley rlogind with SPX auth
+rsh-spx		222/tcp	   #Berkeley rshd with SPX auth
+rsh-spx		222/udp	   #Berkeley rshd with SPX auth
+cdc		223/tcp	   #Certificate Distribution Center
+cdc		223/udp	   #Certificate Distribution Center
+direct		242/tcp
+direct		242/udp
+sur-meas	243/tcp	   #Survey Measurement
+sur-meas	243/udp	   #Survey Measurement
+dayna		244/tcp
+dayna		244/udp
+link		245/tcp
+link		245/udp
+dsp3270		246/tcp	   #Display Systems Protocol
+dsp3270		246/udp	   #Display Systems Protocol
+subntbcst_tftp	247/tcp	   #subntbcst_tftp
+subntbcst_tftp	247/udp	   #subntbcst_tftp
+bhfhs		248/tcp
+bhfhs		248/udp
+#		249-255    reserved
+rap		256/tcp
+rap		256/udp
+set		257/tcp	   #secure electronic transaction
+set		257/udp	   #secure electronic transaction
+yak-chat	258/tcp	   #yak winsock personal chat
+yak-chat	258/udp	   #yak winsock personal chat
+esro-gen	259/tcp	   #efficient short remote operations
+esro-gen	259/udp	   #efficient short remote operations
+openport	260/tcp
+openport	260/udp
+nsiiops		261/tcp	   #iiop name service over tls/ssl
+nsiiops		261/udp	   #iiop name service over tls/ssl
+arcisdms	262/tcp
+arcisdms	262/udp
+hdap		263/tcp
+hdap		263/udp
+bgmp		264/tcp
+bgmp		264/udp
+#		265-279	   unassigned
+http-mgmt	280/tcp
+http-mgmt	280/udp
+personal-link	281/tcp
+personal-link	281/udp
+cableport-ax	282/tcp	   #cable port a/x
+cableport-ax	282/udp	   #cable port a/x
+#		283-307    unassigned
+novastorbakcup	308/tcp	   #novastor backup
+novastorbakcup	308/udp	   #novastor backup
+entrusttime	309/tcp
+entrusttime	309/udp
+bhmds		310/tcp
+bhmds		310/udp
+asip-webadmin	311/tcp	   #appleshare ip webadmin
+asip-webadmin	311/udp	   #appleshare ip webadmin
+vslmp		312/tcp
+vslmp		312/udp
+magenta-logic	313/tcp
+magenta-logic	313/udp
+opalis-robot	314/tcp
+opalis-robot	314/udp
+dpsi		315/tcp
+dpsi		315/udp
+decauth		316/tcp
+decauth		316/udp
+zannet		317/tcp
+zannet		317/udp
+#		318-320	   #unassigned
+pip		321/tcp
+pip		321/udp
+#		322-343	   #unassigned
+pdap		344/tcp	   #Prospero Data Access Protocol
+pdap		344/udp	   #Prospero Data Access Protocol
+pawserv		345/tcp	   #Perf Analysis Workbench
+pawserv		345/udp	   #Perf Analysis Workbench
+zserv		346/tcp	   #Zebra server
+zserv		346/udp	   #Zebra server
+fatserv		347/tcp	   #Fatmen Server
+fatserv		347/udp	   #Fatmen Server
+csi-sgwp	348/tcp	   #Cabletron Management Protocol
+csi-sgwp	348/udp	   #Cabletron Management Protocol
+mftp		349/tcp
+mftp		349/udp
+matip-type-a	350/tcp	   #MATIP Type A
+matip-type-a	350/udp
+matip-type-b	351/tcp	   #MATIP Type B
+matip-type-b	351/udp
+bhoetty		351/tcp	   #unassigned but widespread use
+bhoetty		351/udp	   #unassigned but widespread use
+dtag-ste-sb	352/tcp	   #DTAG
+dtag-ste-sb	352/udp	   #DTAG
+bhoedap4	352/tcp	   #unassigned but widespread use
+bhoedap4	352/udp	   #unassigned but widespread use
+ndsauth		353/tcp
+ndsauth		353/udp
+bh611		354/tcp
+bh611		354/udp
+datex-asn	355/tcp
+datex-asn	355/udp
+cloanto-net-1	356/tcp	   #Cloanto Net 1
+cloanto-net-1	356/udp
+bhevent		357/tcp
+bhevent		357/udp
+shrinkwrap	358/tcp
+shrinkwrap	358/udp
+tenebris_nts	359/tcp	   #Tenebris Network Trace Service
+tenebris_nts	359/udp	   #Tenebris Network Trace Service
+scoi2odialog	360/tcp
+scoi2odialog	360/udp
+semantix	361/tcp
+semantix	361/udp
+srssend		362/tcp	   #SRS Send
+srssend		362/udp	   #SRS Send
+rsvp_tunnel	363/tcp
+rsvp_tunnel	363/udp
+aurora-cmgr	364/tcp
+aurora-cmgr	364/udp
+dtk		365/tcp	   #Deception Tool Kit - Fred Cohen <fc@all.net>
+dtk		365/udp	   #Deception Tool Kit - Fred Cohen <fc@all.net>
+odmr		366/tcp
+odmr		366/udp
+mortgageware	367/tcp
+mortgageware	367/udp
+qbikgdp		368/tcp	   #QbikGDP
+qbikgdp		368/udp
+rpc2portmap	369/tcp
+rpc2portmap	369/udp
+codaauth2	370/tcp
+codaauth2	370/udp
+clearcase	371/tcp
+clearcase	371/udp
+ulistserv	372/tcp	   ulistproc	#Unix Listserv
+ulistserv	372/udp	   ulistproc	#Unix Listserv
+legent-1	373/tcp	   #Legent Corporation (now Computer Associates Intl.)
+legent-1	373/udp	   #Legent Corporation (now Computer Associates Intl.)
+legent-2	374/tcp	   #Legent Corporation (now Computer Associates Intl.)
+legent-2	374/udp	   #Legent Corporation (now Computer Associates Intl.)
+hassle		375/tcp
+hassle		375/udp
+nip		376/tcp	   #Amiga Envoy Network Inquiry Proto
+nip		376/udp	   #Amiga Envoy Network Inquiry Proto
+tnETOS		377/tcp	   #NEC Corporation
+tnETOS		377/udp	   #NEC Corporation
+dsETOS		378/tcp	   #NEC Corporation
+dsETOS		378/udp	   #NEC Corporation
+is99c		379/tcp	   #TIA/EIA/IS-99 modem client
+is99c		379/udp	   #TIA/EIA/IS-99 modem client
+is99s		380/tcp	   #TIA/EIA/IS-99 modem server
+is99s		380/udp	   #TIA/EIA/IS-99 modem server
+hp-collector	381/tcp	   #hp performance data collector
+hp-collector	381/udp	   #hp performance data collector
+hp-managed-node	382/tcp	   #hp performance data managed node
+hp-managed-node	382/udp	   #hp performance data managed node
+hp-alarm-mgr	383/tcp	   #hp performance data alarm manager
+hp-alarm-mgr	383/udp	   #hp performance data alarm manager
+arns		384/tcp	   #A Remote Network Server System
+arns		384/udp	   #A Remote Network Server System
+ibm-app		385/tcp	   #IBM Application
+ibm-app		385/udp	   #IBM Application
+asa		386/tcp	   #ASA Message Router Object Def.
+asa		386/udp	   #ASA Message Router Object Def.
+aurp		387/tcp	   #Appletalk Update-Based Routing Pro.
+aurp		387/udp	   #Appletalk Update-Based Routing Pro.
+unidata-ldm	388/tcp	   #Unidata LDM Version 4
+unidata-ldm	388/udp	   #Unidata LDM Version 4
+ldap		389/tcp	   #Lightweight Directory Access Protocol
+ldap		389/udp	   #Lightweight Directory Access Protocol
+uis		390/tcp
+uis		390/udp
+synotics-relay	391/tcp	   #SynOptics SNMP Relay Port
+synotics-relay	391/udp	   #SynOptics SNMP Relay Port
+synotics-broker	392/tcp	   #SynOptics Port Broker Port
+synotics-broker	392/udp	   #SynOptics Port Broker Port
+dis		393/tcp	   #Data Interpretation System
+dis		393/udp	   #Data Interpretation System
+embl-ndt	394/tcp	   #EMBL Nucleic Data Transfer
+embl-ndt	394/udp	   #EMBL Nucleic Data Transfer
+netcp		395/tcp	   #NETscout Control Protocol
+netcp		395/udp	   #NETscout Control Protocol
+netware-ip	396/tcp	   #Novell Netware over IP
+netware-ip	396/udp	   #Novell Netware over IP
+mptn		397/tcp	   #Multi Protocol Trans. Net.
+mptn		397/udp	   #Multi Protocol Trans. Net.
+kryptolan	398/tcp
+kryptolan	398/udp
+iso-tsap-c2	399/tcp	   #ISO-TSAP Class 2
+iso-tsap-c2	399/udp	   #ISO-TSAP Class 2
+work-sol	400/tcp	   #Workstation Solutions
+work-sol	400/udp	   #Workstation Solutions
+ups		401/tcp	   #Uninterruptible Power Supply
+ups		401/udp	   #Uninterruptible Power Supply
+genie		402/tcp	   #Genie Protocol
+genie		402/udp	   #Genie Protocol
+decap		403/tcp
+decap		403/udp
+nced		404/tcp
+nced		404/udp
+ncld		405/tcp
+ncld		405/udp
+imsp		406/tcp	   #Interactive Mail Support Protocol
+imsp		406/udp	   #Interactive Mail Support Protocol
+timbuktu	407/tcp
+timbuktu	407/udp
+prm-sm		408/tcp	   #Prospero Resource Manager Sys. Man.
+prm-sm		408/udp	   #Prospero Resource Manager Sys. Man.
+prm-nm		409/tcp	   #Prospero Resource Manager Node Man.
+prm-nm		409/udp	   #Prospero Resource Manager Node Man.
+decladebug	410/tcp	   #DECLadebug Remote Debug Protocol
+decladebug	410/udp	   #DECLadebug Remote Debug Protocol
+rmt		411/tcp	   #Remote MT Protocol
+rmt		411/udp	   #Remote MT Protocol
+synoptics-trap	412/tcp	   #Trap Convention Port
+synoptics-trap	412/udp	   #Trap Convention Port
+smsp		413/tcp
+smsp		413/udp
+infoseek	414/tcp
+infoseek	414/udp
+bnet		415/tcp
+bnet		415/udp
+silverplatter	416/tcp
+silverplatter	416/udp
+onmux		417/tcp
+onmux		417/udp
+hyper-g		418/tcp
+hyper-g		418/udp
+ariel1		419/tcp
+ariel1		419/udp
+smpte		420/tcp
+smpte		420/udp
+ariel2		421/tcp
+ariel2		421/udp
+ariel3		422/tcp
+ariel3		422/udp
+opc-job-start	423/tcp	   #IBM Operations Planning and Control Start
+opc-job-start	423/udp	   #IBM Operations Planning and Control Start
+opc-job-track	424/tcp	   #IBM Operations Planning and Control Track
+opc-job-track	424/udp	   #IBM Operations Planning and Control Track
+icad-el		425/tcp
+icad-el		425/udp
+smartsdp	426/tcp
+smartsdp	426/udp
+svrloc		427/tcp	   #Server Location
+svrloc		427/udp	   #Server Location
+ocs_cmu		428/tcp
+ocs_cmu		428/udp
+ocs_amu		429/tcp
+ocs_amu		429/udp
+utmpsd		430/tcp
+utmpsd		430/udp
+utmpcd		431/tcp
+utmpcd		431/udp
+iasd		432/tcp
+iasd		432/udp
+nnsp		433/tcp
+nnsp		433/udp
+mobileip-agent	434/tcp
+mobileip-agent	434/udp
+mobilip-mn	435/tcp
+mobilip-mn	435/udp
+dna-cml		436/tcp
+dna-cml		436/udp
+comscm		437/tcp
+comscm		437/udp
+dsfgw		438/tcp
+dsfgw		438/udp
+dasp		439/tcp
+dasp		439/udp
+sgcp		440/tcp
+sgcp		440/udp
+decvms-sysmgt	441/tcp
+decvms-sysmgt	441/udp
+cvc_hostd	442/tcp
+cvc_hostd	442/udp
+https		443/tcp
+https		443/udp
+snpp		444/tcp	   #Simple Network Paging Protocol
+snpp		444/udp	   #Simple Network Paging Protocol
+#			   [RFC1568]
+microsoft-ds	445/tcp
+microsoft-ds	445/udp
+ddm-rdb		446/tcp
+ddm-rdb		446/udp
+ddm-dfm		447/tcp
+ddm-dfm		447/udp
+ddm-ssl		448/tcp	   ddm-byte
+ddm-ssl		448/udp	   ddm-byte
+as-servermap	449/tcp	   #AS Server Mapper
+as-servermap	449/udp	   #AS Server Mapper
+tserver		450/tcp
+tserver		450/udp
+sfs-smp-net	451/tcp	   #Cray Network Semaphore server
+sfs-smp-net	451/udp	   #Cray Network Semaphore server
+sfs-config	452/tcp	   #Cray SFS config server
+sfs-config	452/udp	   #Cray SFS config server
+creativeserver	453/tcp	   #CreativeServer
+creativeserver	453/udp	   #CreativeServer
+contentserver	454/tcp	   #ContentServer
+contentserver	454/udp	   #ContentServer
+creativepartnr	455/tcp	   #CreativePartnr
+creativepartnr	455/udp	   #CreativePartnr
+macon-tcp	456/tcp
+macon-udp	456/udp
+scohelp		457/tcp
+scohelp		457/udp
+appleqtc	458/tcp	   #apple quick time
+appleqtc	458/udp	   #apple quick time
+ampr-rcmd	459/tcp
+ampr-rcmd	459/udp
+skronk		460/tcp
+skronk		460/udp
+datasurfsrv	461/tcp
+datasurfsrv	461/udp
+datasurfsrvsec	462/tcp
+datasurfsrvsec	462/udp
+alpes		463/tcp
+alpes		463/udp
+#
+kpasswd5	464/tcp	   # Kerberos (v5)
+kpasswd5	464/udp	   # Kerberos (v5)
+#PROBLEMS!==============================================================
+# IANA has offically assigned these two ports as ``kpasswd''
+#kpasswd	464/tcp    # Kerberos (v5)
+#kpasswd	464/udp    # Kerberos (v5)
+#PROBLEMS!==============================================================
+smtps		465/tcp	   #smtp protocol over TLS/SSL (was ssmtp)
+smtps		465/udp	   #smtp protocol over TLS/SSL (was ssmtp)
+digital-vrc	466/tcp
+digital-vrc	466/udp
+mylex-mapd	467/tcp
+mylex-mapd	467/udp
+photuris	468/tcp
+photuris	468/udp
+rcp		469/tcp	   #Radio Control Protocol
+rcp		469/udp	   #Radio Control Protocol
+scx-proxy	470/tcp
+scx-proxy	470/udp
+mondex		471/tcp
+mondex		471/udp
+ljk-login	472/tcp
+ljk-login	472/udp
+hybrid-pop	473/tcp
+hybrid-pop	473/udp
+tn-tl-w1	474/tcp
+tn-tl-w2	474/udp
+tcpnethaspsrv	475/tcp
+tcpnethaspsrv	475/udp
+tn-tl-fd1	476/tcp
+tn-tl-fd1	476/udp
+ss7ns		477/tcp
+ss7ns		477/udp
+spsc		478/tcp
+spsc		478/udp
+iafserver	479/tcp
+iafserver	479/udp
+iafdbase	480/tcp
+iafdbase	480/udp
+ph		481/tcp
+ph		481/udp
+bgs-nsi		482/tcp
+bgs-nsi		482/udp
+ulpnet		483/tcp
+ulpnet		483/udp
+integra-sme	484/tcp	   #Integra Software Management Environment
+integra-sme	484/udp	   #Integra Software Management Environment
+powerburst	485/tcp	   #Air Soft Power Burst
+powerburst	485/udp	   #Air Soft Power Burst
+avian		486/tcp
+avian		486/udp
+saft		487/tcp	   #saft Simple Asynchronous File Transfer
+saft		487/udp	   #saft Simple Asynchronous File Transfer
+gss-http	488/tcp
+gss-http	488/udp
+nest-protocol	489/tcp
+nest-protocol	489/udp
+micom-pfs	490/tcp
+micom-pfs	490/udp
+go-login	491/tcp
+go-login	491/udp
+ticf-1		492/tcp	   #Transport Independent Convergence for FNA
+ticf-1		492/udp	   #Transport Independent Convergence for FNA
+ticf-2		493/tcp	   #Transport Independent Convergence for FNA
+ticf-2		493/udp	   #Transport Independent Convergence for FNA
+pov-ray		494/tcp
+pov-ray		494/udp
+intecourier	495/tcp
+intecourier	495/udp
+pim-rp-disc	496/tcp
+pim-rp-disc	496/udp
+dantz		497/tcp
+dantz		497/udp
+siam		498/tcp
+siam		498/udp
+iso-ill		499/tcp	   #ISO ILL Protocol
+iso-ill		499/udp	   #ISO ILL Protocol
+isakmp		500/tcp
+isakmp		500/udp
+stmf		501/tcp
+stmf		501/udp
+asa-appl-proto	502/tcp
+asa-appl-proto	502/udp
+intrinsa	503/tcp
+intrinsa	503/udp
+citadel		504/tcp
+citadel		504/udp
+mailbox-lm	505/tcp
+mailbox-lm	505/udp
+ohimsrv		506/tcp
+ohimsrv		506/udp
+crs		507/tcp
+crs		507/udp
+xvttp		508/tcp
+xvttp		508/udp
+snare		509/tcp
+snare		509/udp
+fcp		510/tcp	   #FirstClass Protocol
+fcp		510/udp	   #FirstClass Protocol
+passgo		511/tcp
+passgo		511/udp
+#
+# Berkeley-specific services
+#
+exec		512/tcp	   #remote process execution;
+#			   authentication performed using
+#			   passwords and UNIX login names
+biff		512/udp	   comsat	#used by mail system to notify users
+#					of new mail received; currently
+#					receives messages only from
+#					processes on the same machine
+login		513/tcp	   #remote login a la telnet;
+#			   automatic authentication performed
+#			   based on priviledged port numbers
+#			   and distributed data bases which
+#			   identify "authentication domains"
+who		513/udp	   whod		#maintains data bases showing who's
+#					logged in to machines on a local
+#					net and the load average of the
+#					machine
+shell		514/tcp	   cmd		#like exec, but automatic
+#					authentication is performed as for
+#					login server
+syslog		514/udp
+printer		515/tcp	   spooler
+printer		515/udp	   spooler
+videotex	516/tcp
+videotex	516/udp
+talk		517/tcp	   #like tenex link, but across
+#			   machine - unfortunately, doesn't
+#			   use link protocol (this is actually
+#			   just a rendezvous port from which a
+#			   tcp connection is established)
+talk		517/udp	   #like tenex link, but across
+#			   machine - unfortunately, doesn't
+#			   use link protocol (this is actually
+#			   just a rendezvous port from which a
+#			   tcp connection is established)
+ntalk		518/tcp
+ntalk		518/udp
+utime		519/tcp	   unixtime
+utime		519/udp	   unixtime
+efs		520/tcp	   #extended file name server
+router		520/udp	   route routed	#local routing process (on site);
+#					   uses variant of Xerox NS routing
+#					   information protocol
+ripng		521/tcp
+ripng		521/udp
+ulp		522/tcp
+ulp		522/udp
+ibm-db2		523/tcp
+ibm-db2		523/udp
+ncp		524/tcp
+ncp		524/udp
+timed		525/tcp	   timeserver
+timed		525/udp	   timeserver
+tempo		526/tcp	   newdate
+tempo		526/udp	   newdate
+stx		527/tcp	   #Stock IXChange
+stx		527/udp	   #Stock IXChange
+custix		528/tcp	   #Customer IXChange
+custix		528/udp	   #Customer IXChange
+irc-serv	529/tcp
+irc-serv	529/udp
+courier		530/tcp	   rpc
+courier		530/udp	   rpc
+conference	531/tcp	   chat
+conference	531/udp	   chat
+netnews		532/tcp	   readnews
+netnews		532/udp	   readnews
+netwall		533/tcp	   #for emergency broadcasts
+netwall		533/udp	   #for emergency broadcasts
+mm-admin	534/tcp	   #MegaMedia Admin
+mm-admin	534/udp	   #MegaMedia Admin
+iiop		535/tcp
+iiop		535/udp
+opalis-rdv	536/tcp
+opalis-rdv	536/udp
+nmsp		537/tcp	   #Networked Media Streaming Protocol
+nmsp		537/udp	   #Networked Media Streaming Protocol
+gdomap		538/tcp
+gdomap		538/udp
+apertus-ldp	539/tcp	   #Apertus Technologies Load Determination
+apertus-ldp	539/udp	   #Apertus Technologies Load Determination
+uucp		540/tcp	   uucpd
+uucp		540/udp	   uucpd
+uucp-rlogin	541/tcp
+uucp-rlogin	541/udp
+commerce	542/tcp
+commerce	542/udp
+klogin		543/tcp	   # Kerberos (v4/v5)
+klogin		543/udp	   # Kerberos (v4/v5)
+kshell		544/tcp	   krcmd	# Kerberos (v4/v5)
+kshell		544/udp	   krcmd	# Kerberos (v4/v5)
+appleqtcsrvr	545/tcp
+appleqtcsrvr	545/udp
+dhcpv6-client	546/tcp	   #DHCPv6 Client
+dhcpv6-client	546/udp	   #DHCPv6 Client
+dhcpv6-server	547/tcp	   #DHCPv6 Server
+dhcpv6-server	547/udp	   #DHCPv6 Server
+afpovertcp	548/tcp	   #AFP over TCP
+afpovertcp	548/udp	   #AFP over TCP
+idfp		549/tcp
+idfp		549/udp
+new-rwho	550/tcp	   new-who
+new-rwho	550/udp	   new-who
+cybercash	551/tcp
+cybercash	551/udp
+deviceshare	552/tcp
+deviceshare	552/udp
+pirp		553/tcp
+pirp		553/udp
+rtsp		554/tcp	   #Real Time Stream Control Protocol
+rtsp		554/udp	   #Real Time Stream Control Protocol
+dsf		555/tcp
+dsf		555/udp
+remotefs	556/tcp	   rfs rfs_server	# Brunhoff remote filesystem
+remotefs	556/udp	   rfs rfs_server	# Brunhoff remote filesystem
+openvms-sysipc	557/tcp
+openvms-sysipc	557/udp
+sdnskmp		558/tcp
+sdnskmp		558/udp
+teedtap		559/tcp
+teedtap		559/udp
+rmonitor	560/tcp	   rmonitord
+rmonitor	560/udp	   rmonitord
+monitor		561/tcp
+monitor		561/udp
+chshell		562/tcp	   chcmd
+chshell		562/udp	   chcmd
+nntps		563/tcp	   snntp	#nntp protocol over TLS/SSL
+nntps		563/udp	   snntp	#nntp protocol over TLS/SSL
+9pfs		564/tcp	   #plan 9 file service
+9pfs		564/udp	   #plan 9 file service
+whoami		565/tcp
+whoami		565/udp
+streettalk	566/tcp
+banyan-rpc	567/tcp
+banyan-rpc	567/udp
+ms-shuttle	568/tcp	   #Microsoft shuttle
+ms-shuttle	568/udp	   #Microsoft shuttle
+ms-rome		569/tcp	   #Microsoft rome
+ms-rome		569/udp	   #Microsoft rome
+meter		570/tcp	   #demon
+meter		570/udp	   #demon
+umeter		571/tcp	   #udemon
+umeter		571/udp	   #udemon
+sonar		572/tcp
+sonar		572/udp
+banyan-vip	573/tcp
+banyan-vip	573/udp
+ftp-agent	574/tcp	   #FTP Software Agent System
+ftp-agent	574/udp	   #FTP Software Agent System
+vemmi		575/tcp
+vemmi		575/udp
+ipcd		576/tcp
+ipcd		576/udp
+vnas		577/tcp
+vnas		577/udp
+ipdd		578/tcp
+ipdd		578/udp
+decbsrv		579/tcp
+decbsrv		579/udp
+sntp-heartbeat	580/tcp
+sntp-heartbeat	580/udp
+bdp		581/tcp	   #Bundle Discovery Protocol
+bdp		581/udp	   #Bundle Discovery Protocol
+scc-security	582/tcp
+scc-security	582/udp
+philips-vc	583/tcp	   #Philips Video-Conferencing
+philips-vc	583/udp	   #Philips Video-Conferencing
+keyserver	584/tcp
+keyserver	584/udp
+#imap4-ssl@585 never should have been allocated. See PR 46294.
+#imap4-ssl	585/tcp	   #IMAP4+SSL (use of 585 is not recommended,
+#imap4-ssl	585/udp	   #		use 993 instead)
+password-chg	586/tcp
+password-chg	586/udp
+submission	587/tcp
+submission	587/udp
+cal		588/tcp
+cal		588/udp
+eyelink		589/tcp
+eyelink		589/udp
+tns-cml		590/tcp
+tns-cml		590/udp
+http-alt	591/tcp	   #FileMaker, Inc. - HTTP Alternate (see Port 80)
+http-alt	591/udp	   #FileMaker, Inc. - HTTP Alternate (see Port 80)
+eudora-set	592/tcp
+eudora-set	592/udp
+http-rpc-epmap	593/tcp	   #HTTP RPC Ep Map
+http-rpc-epmap	593/udp	   #HTTP RPC Ep Map
+tpip		594/tcp
+tpip		594/udp
+cab-protocol	595/tcp
+cab-protocol	595/udp
+smsd		596/tcp
+smsd		596/udp
+ptcnameservice	597/tcp	   #PTC Name Service
+ptcnameservice	597/udp	   #PTC Name Service
+sco-websrvrmg3	598/tcp	   #SCO Web Server Manager 3
+sco-websrvrmg3	598/udp	   #SCO Web Server Manager 3
+acp		599/tcp	   #Aeolon Core Protocol
+acp		599/udp	   #Aeolon Core Protocol
+ipcserver	600/tcp	   #Sun IPC server
+ipcserver	600/udp	   #Sun IPC server
+urm		606/tcp	   #Cray Unified Resource Manager
+urm		606/udp	   #Cray Unified Resource Manager
+nqs		607/tcp
+nqs		607/udp
+sift-uft	608/tcp	   #Sender-Initiated/Unsolicited File Transfer
+sift-uft	608/udp	   #Sender-Initiated/Unsolicited File Transfer
+npmp-trap	609/tcp
+npmp-trap	609/udp
+npmp-local	610/tcp
+npmp-local	610/udp
+npmp-gui	611/tcp
+npmp-gui	611/udp
+sshell		614/tcp	   #SSLshell
+sshell		614/udp
+ipp		631/tcp	   #IPP (Internet Printing Protocol)
+ipp		631/udp	   #IPP (Internet Printing Protocol)
+ginad		634/tcp
+ginad		634/udp
+ldaps		636/tcp	   sldap	#ldap protocol over TLS/SSL
+ldaps		636/udp	   sldap
+aodv		654/tcp	   #Ad-Hoc On-Demand Distance Vector Routing Protocol
+aodv		654/udp	   #Ad-Hoc On-Demand Distance Vector Routing Protocol
+mdqs		666/tcp
+mdqs		666/udp
+#PROBLEMS!===============================================
+doom		666/tcp	   #doom Id Software
+doom		666/udp	   #doom Id Software
+#PROBLEMS!===============================================
+acap		674/tcp	   #Application Configuration Access Protocol
+acap		674/udp	   #Application Configuration Access Protocol
+elcsd		704/tcp	   #errlog copy/server daemon
+elcsd		704/udp	   #errlog copy/server daemon
+entrustmanager	709/tcp	   #EntrustManager
+entrustmanager	709/udp	   #EntrustManager
+netviewdm1	729/tcp	   #IBM NetView DM/6000 Server/Client
+netviewdm1	729/udp	   #IBM NetView DM/6000 Server/Client
+netviewdm2	730/tcp	   #IBM NetView DM/6000 send/tcp
+netviewdm2	730/udp	   #IBM NetView DM/6000 send/tcp
+netviewdm3	731/tcp	   #IBM NetView DM/6000 receive/tcp
+netviewdm3	731/udp	   #IBM NetView DM/6000 receive/tcp
+netgw		741/tcp
+netgw		741/udp
+netrcs		742/tcp	   #Network based Rev. Cont. Sys.
+netrcs		742/udp	   #Network based Rev. Cont. Sys.
+flexlm		744/tcp	   #Flexible License Manager
+flexlm		744/udp	   #Flexible License Manager
+fujitsu-dev	747/tcp	   #Fujitsu Device Control
+fujitsu-dev	747/udp	   #Fujitsu Device Control
+ris-cm		748/tcp	   #Russell Info Sci Calendar Manager
+ris-cm		748/udp	   #Russell Info Sci Calendar Manager
+kerberos-adm	749/tcp	   #Kerberos administration (v5)
+kerberos-adm	749/udp	   #Kerberos administration (v5)
+kerberos-iv	750/udp	   kdc		# Kerberos (v4)
+kerberos-iv	750/tcp	   kdc		# Kerberos (v4)
+#PROBLEMS!========================================================
+#rfile		750/tcp
+#loadav		750/udp
+#PROBLEMS!========================================================
+kerberos_master	751/tcp	   # Kerberos `kadmin' (v4)
+kerberos_master	751/udp	   # Kerberos `kadmin' (v4)
+#PROBLEMS!========================================================
+pump		751/tcp
+pump		751/udp
+#PROBLEMS!========================================================
+qrh		752/tcp
+qrh		752/udp
+rrh		753/tcp
+rrh		753/udp
+krb_prop	754/tcp	   krb5_prop	# kerberos/v5 server propagation
+#PROBLEMS!========================================================
+tell		754/tcp	   #send
+#PROBLEMS!========================================================
+tell		754/udp	   #send
+nlogin		758/tcp
+nlogin		758/udp
+con		759/tcp
+con		759/udp
+krbupdate	760/tcp	   kreg		# Kerberos (v4) registration
+#PROBLEMS!========================================================
+ns		760/tcp
+#PROBLEMS!========================================================
+ns		760/udp
+kpasswd		761/tcp	   kpwd		# Kerberos (v4) "passwd"
+#PROBLEMS!========================================================
+rxe		761/tcp
+#PROBLEMS!========================================================
+rxe		761/udp
+quotad		762/tcp
+quotad		762/udp
+cycleserv	763/tcp
+cycleserv	763/udp
+omserv		764/tcp
+omserv		764/udp
+webster		765/tcp
+webster		765/udp
+phonebook	767/tcp	   #phone
+phonebook	767/udp	   #phone
+vid		769/tcp
+vid		769/udp
+cadlock		770/tcp
+cadlock		770/udp
+rtip		771/tcp
+rtip		771/udp
+cycleserv2	772/tcp
+cycleserv2	772/udp
+submit		773/tcp
+notify		773/udp
+rpasswd		774/tcp
+acmaint_dbd	774/udp
+entomb		775/tcp
+acmaint_transd	775/udp
+wpages		776/tcp
+wpages		776/udp
+wpgs		780/tcp
+wpgs		780/udp
+concert		786/tcp
+concert		786/udp
+mdbs_daemon	800/tcp
+mdbs_daemon	800/udp
+device		801/tcp
+device		801/udp
+supfilesrv	871/tcp	   # for SUP
+rsync		873/tcp
+rsync		873/udp
+accessbuilder	888/tcp
+accessbuilder	888/udp
+swat		901/tcp	   # samba web configuration tool
+rndc		953/tcp	   # named's rndc control socket
+ftps-data	989/tcp	   # ftp protocol, data, over TLS/SSL
+ftps-data	989/udp
+ftps		990/tcp	   # ftp protocol, control, over TLS/SSL
+ftps		990/udp
+telnets		992/tcp	   # telnet protocol over TLS/SSL
+telnets		992/udp
+imaps		993/tcp	   # imap4 protocol over TLS/SSL
+imaps		993/udp
+ircs		994/tcp	   # irc protocol over TLS/SSL
+ircs		994/udp
+pop3s		995/tcp	   spop3	# pop3 protocol over TLS/SSL
+pop3s		995/udp	   spop3
+vsinet		996/tcp
+vsinet		996/udp
+maitrd		997/tcp
+maitrd		997/udp
+busboy		998/tcp
+puparp		998/udp
+garcon		999/tcp
+applix		999/udp	   #Applix ac
+puprouter	999/tcp
+puprouter	999/udp
+cadlock2	1000/tcp
+cadlock2	1000/udp
+#
+# REGISTERED PORT NUMBERS
+#
+blackjack	1025/tcp   #network blackjack
+blackjack	1025/udp   #network blackjack
+iad1		1030/tcp   #BBN IAD
+iad1		1030/udp   #BBN IAD
+iad2		1031/tcp   #BBN IAD
+iad2		1031/udp   #BBN IAD
+iad3		1032/tcp   #BBN IAD
+iad3		1032/udp   #BBN IAD
+nim		1058/tcp
+nim		1058/udp
+nimreg		1059/tcp
+nimreg		1059/udp
+instl_boots	1067/tcp   #Installation Bootstrap Proto. Serv.
+instl_boots	1067/udp   #Installation Bootstrap Proto. Serv.
+instl_bootc	1068/tcp   #Installation Bootstrap Proto. Cli.
+instl_bootc	1068/udp   #Installation Bootstrap Proto. Cli.
+socks		1080/tcp
+socks		1080/udp
+ansoft-lm-1	1083/tcp   #Anasoft License Manager
+ansoft-lm-1	1083/udp   #Anasoft License Manager
+ansoft-lm-2	1084/tcp   #Anasoft License Manager
+ansoft-lm-2	1084/udp   #Anasoft License Manager
+webobjects	1085/tcp   #Web Objects
+webobjects	1085/udp   #Web Objects
+kpop		1109/tcp   #Unofficial
+kpop		1109/udp   #Unofficial
+nfsd-status	1110/tcp   #Cluster status info
+nfsd-keepalive	1110/udp   #Client status info
+supfiledbg	1127/tcp   # for SUP
+nfa		1155/tcp   #Network File Access
+nfa		1155/udp   #Network File Access
+phone		1167/udp   #conference calling
+skkserv		1178/tcp   #SKK (kanji input)
+lupa		1212/tcp
+lupa		1212/udp
+nerv		1222/tcp   #SNI R&D network
+nerv		1222/udp   #SNI R&D network
+hermes		1248/tcp
+hermes		1248/udp
+healthd		1281/tcp   #healthd
+healthd		1281/udp   #healthd
+alta-ana-lm	1346/tcp   #Alta Analytics License Manager
+alta-ana-lm	1346/udp   #Alta Analytics License Manager
+bbn-mmc		1347/tcp   #multi media conferencing
+bbn-mmc		1347/udp   #multi media conferencing
+bbn-mmx		1348/tcp   #multi media conferencing
+bbn-mmx		1348/udp   #multi media conferencing
+sbook		1349/tcp   #Registration Network Protocol
+sbook		1349/udp   #Registration Network Protocol
+editbench	1350/tcp   #Registration Network Protocol
+editbench	1350/udp   #Registration Network Protocol
+equationbuilder	1351/tcp   #Digital Tool Works (MIT)
+equationbuilder	1351/udp   #Digital Tool Works (MIT)
+lotusnote	1352/tcp   #Lotus Note
+lotusnote	1352/udp   #Lotus Note
+relief		1353/tcp   #Relief Consulting
+relief		1353/udp   #Relief Consulting
+rightbrain	1354/tcp   #RightBrain Software
+rightbrain	1354/udp   #RightBrain Software
+intuitive-edge	1355/tcp   #Intuitive Edge
+intuitive-edge	1355/udp   #Intuitive Edge
+cuillamartin	1356/tcp   #CuillaMartin Company
+cuillamartin	1356/udp   #CuillaMartin Company
+pegboard	1357/tcp   #Electronic PegBoard
+pegboard	1357/udp   #Electronic PegBoard
+connlcli	1358/tcp
+connlcli	1358/udp
+ftsrv		1359/tcp
+ftsrv		1359/udp
+mimer		1360/tcp
+mimer		1360/udp
+linx		1361/tcp
+linx		1361/udp
+timeflies	1362/tcp
+timeflies	1362/udp
+ndm-requester	1363/tcp   #Network DataMover Requester
+ndm-requester	1363/udp   #Network DataMover Requester
+ndm-server	1364/tcp   #Network DataMover Server
+ndm-server	1364/udp   #Network DataMover Server
+adapt-sna	1365/tcp   #Network Software Associates
+adapt-sna	1365/udp   #Network Software Associates
+netware-csp	1366/tcp   #Novell NetWare Comm Service Platform
+netware-csp	1366/udp   #Novell NetWare Comm Service Platform
+dcs		1367/tcp
+dcs		1367/udp
+screencast	1368/tcp
+screencast	1368/udp
+gv-us		1369/tcp   #GlobalView to Unix Shell
+gv-us		1369/udp   #GlobalView to Unix Shell
+us-gv		1370/tcp   #Unix Shell to GlobalView
+us-gv		1370/udp   #Unix Shell to GlobalView
+fc-cli		1371/tcp   #Fujitsu Config Protocol
+fc-cli		1371/udp   #Fujitsu Config Protocol
+fc-ser		1372/tcp   #Fujitsu Config Protocol
+fc-ser		1372/udp   #Fujitsu Config Protocol
+chromagrafx	1373/tcp
+chromagrafx	1373/udp
+molly		1374/tcp   #EPI Software Systems
+molly		1374/udp   #EPI Software Systems
+bytex		1375/tcp
+bytex		1375/udp
+ibm-pps		1376/tcp   #IBM Person to Person Software
+ibm-pps		1376/udp   #IBM Person to Person Software
+cichlid		1377/tcp   #Cichlid License Manager
+cichlid		1377/udp   #Cichlid License Manager
+elan		1378/tcp   #Elan License Manager
+elan		1378/udp   #Elan License Manager
+dbreporter	1379/tcp   #Integrity Solutions
+dbreporter	1379/udp   #Integrity Solutions
+telesis-licman	1380/tcp   #Telesis Network License Manager
+telesis-licman	1380/udp   #Telesis Network License Manager
+apple-licman	1381/tcp   #Apple Network License Manager
+apple-licman	1381/udp   #Apple Network License Manager
+#udt_os		1382/tcp
+#udt_os		1382/udp
+gwha		1383/tcp   #GW Hannaway Network License Manager
+gwha		1383/udp   #GW Hannaway Network License Manager
+os-licman	1384/tcp   #Objective Solutions License Manager
+os-licman	1384/udp   #Objective Solutions License Manager
+atex_elmd	1385/tcp   #Atex Publishing License Manager
+atex_elmd	1385/udp   #Atex Publishing License Manager
+checksum	1386/tcp   #CheckSum License Manager
+checksum	1386/udp   #CheckSum License Manager
+cadsi-lm	1387/tcp   #Computer Aided Design Software Inc LM
+cadsi-lm	1387/udp   #Computer Aided Design Software Inc LM
+objective-dbc	1388/tcp   #Objective Solutions DataBase Cache
+objective-dbc	1388/udp   #Objective Solutions DataBase Cache
+iclpv-dm	1389/tcp   #Document Manager
+iclpv-dm	1389/udp   #Document Manager
+iclpv-sc	1390/tcp   #Storage Controller
+iclpv-sc	1390/udp   #Storage Controller
+iclpv-sas	1391/tcp   #Storage Access Server
+iclpv-sas	1391/udp   #Storage Access Server
+iclpv-pm	1392/tcp   #Print Manager
+iclpv-pm	1392/udp   #Print Manager
+iclpv-nls	1393/tcp   #Network Log Server
+iclpv-nls	1393/udp   #Network Log Server
+iclpv-nlc	1394/tcp   #Network Log Client
+iclpv-nlc	1394/udp   #Network Log Client
+iclpv-wsm	1395/tcp   #PC Workstation Manager software
+iclpv-wsm	1395/udp   #PC Workstation Manager software
+dvl-activemail	1396/tcp   #DVL Active Mail
+dvl-activemail	1396/udp   #DVL Active Mail
+audio-activmail	1397/tcp   #Audio Active Mail
+audio-activmail	1397/udp   #Audio Active Mail
+video-activmail	1398/tcp   #Video Active Mail
+video-activmail	1398/udp   #Video Active Mail
+cadkey-licman	1399/tcp   #Cadkey License Manager
+cadkey-licman	1399/udp   #Cadkey License Manager
+cadkey-tablet	1400/tcp   #Cadkey Tablet Daemon
+cadkey-tablet	1400/udp   #Cadkey Tablet Daemon
+goldleaf-licman	1401/tcp   #Goldleaf License Manager
+goldleaf-licman	1401/udp   #Goldleaf License Manager
+prm-sm-np	1402/tcp   #Prospero Resource Manager
+prm-sm-np	1402/udp   #Prospero Resource Manager
+prm-nm-np	1403/tcp   #Prospero Resource Manager
+prm-nm-np	1403/udp   #Prospero Resource Manager
+igi-lm		1404/tcp   #Infinite Graphics License Manager
+igi-lm		1404/udp   #Infinite Graphics License Manager
+ibm-res		1405/tcp   #IBM Remote Execution Starter
+ibm-res		1405/udp   #IBM Remote Execution Starter
+netlabs-lm	1406/tcp   #NetLabs License Manager
+netlabs-lm	1406/udp   #NetLabs License Manager
+dbsa-lm		1407/tcp   #DBSA License Manager
+dbsa-lm		1407/udp   #DBSA License Manager
+sophia-lm	1408/tcp   #Sophia License Manager
+sophia-lm	1408/udp   #Sophia License Manager
+here-lm		1409/tcp   #Here License Manager
+here-lm		1409/udp   #Here License Manager
+hiq		1410/tcp   #HiQ License Manager
+hiq		1410/udp   #HiQ License Manager
+af		1411/tcp   #AudioFile
+af		1411/udp   #AudioFile
+innosys		1412/tcp
+innosys		1412/udp
+innosys-acl	1413/tcp
+innosys-acl	1413/udp
+ibm-mqseries	1414/tcp   #IBM MQSeries
+ibm-mqseries	1414/udp   #IBM MQSeries
+dbstar		1415/tcp
+dbstar		1415/udp
+novell-lu6.2	1416/tcp   #Novell LU6.2
+novell-lu6.2	1416/udp   #Novell LU6.2
+timbuktu-srv1	1417/tcp   #Timbuktu Service 1 Port
+timbuktu-srv1	1417/udp   #Timbuktu Service 1 Port
+timbuktu-srv2	1418/tcp   #Timbuktu Service 2 Port
+timbuktu-srv2	1418/udp   #Timbuktu Service 2 Port
+timbuktu-srv3	1419/tcp   #Timbuktu Service 3 Port
+timbuktu-srv3	1419/udp   #Timbuktu Service 3 Port
+timbuktu-srv4	1420/tcp   #Timbuktu Service 4 Port
+timbuktu-srv4	1420/udp   #Timbuktu Service 4 Port
+gandalf-lm	1421/tcp   #Gandalf License Manager
+gandalf-lm	1421/udp   #Gandalf License Manager
+autodesk-lm	1422/tcp   #Autodesk License Manager
+autodesk-lm	1422/udp   #Autodesk License Manager
+essbase		1423/tcp   #Essbase Arbor Software
+essbase		1423/udp   #Essbase Arbor Software
+hybrid		1424/tcp   #Hybrid Encryption Protocol
+hybrid		1424/udp   #Hybrid Encryption Protocol
+zion-lm		1425/tcp   #Zion Software License Manager
+zion-lm		1425/udp   #Zion Software License Manager
+sas-1		1426/tcp   #Satellite-data Acquisition System 1
+sas-1		1426/udp   #Satellite-data Acquisition System 1
+mloadd		1427/tcp   #mloadd monitoring tool
+mloadd		1427/udp   #mloadd monitoring tool
+informatik-lm	1428/tcp   #Informatik License Manager
+informatik-lm	1428/udp   #Informatik License Manager
+nms		1429/tcp   #Hypercom NMS
+nms		1429/udp   #Hypercom NMS
+tpdu		1430/tcp   #Hypercom TPDU
+tpdu		1430/udp   #Hypercom TPDU
+rgtp		1431/tcp   #Reverse Gossip Transport
+rgtp		1431/udp   #Reverse Gossip Transport
+blueberry-lm	1432/tcp   #Blueberry Software License Manager
+blueberry-lm	1432/udp   #Blueberry Software License Manager
+ms-sql-s	1433/tcp   #Microsoft-SQL-Server
+ms-sql-s	1433/udp   #Microsoft-SQL-Server
+ms-sql-m	1434/tcp   #Microsoft-SQL-Monitor
+ms-sql-m	1434/udp   #Microsoft-SQL-Monitor
+ibm-cics	1435/tcp
+ibm-cics	1435/udp
+sas-2		1436/tcp   #Satellite-data Acquisition System 2
+sas-2		1436/udp   #Satellite-data Acquisition System 2
+tabula		1437/tcp
+tabula		1437/udp
+eicon-server	1438/tcp   #Eicon Security Agent/Server
+eicon-server	1438/udp   #Eicon Security Agent/Server
+eicon-x25	1439/tcp   #Eicon X25/SNA Gateway
+eicon-x25	1439/udp   #Eicon X25/SNA Gateway
+eicon-slp	1440/tcp   #Eicon Service Location Protocol
+eicon-slp	1440/udp   #Eicon Service Location Protocol
+cadis-1		1441/tcp   #Cadis License Management
+cadis-1		1441/udp   #Cadis License Management
+cadis-2		1442/tcp   #Cadis License Management
+cadis-2		1442/udp   #Cadis License Management
+ies-lm		1443/tcp   #Integrated Engineering Software
+ies-lm		1443/udp   #Integrated Engineering Software
+marcam-lm	1444/tcp   #Marcam  License Management
+marcam-lm	1444/udp   #Marcam  License Management
+proxima-lm	1445/tcp   #Proxima License Manager
+proxima-lm	1445/udp   #Proxima License Manager
+ora-lm		1446/tcp   #Optical Research Associates License Manager
+ora-lm		1446/udp   #Optical Research Associates License Manager
+apri-lm		1447/tcp   #Applied Parallel Research LM
+apri-lm		1447/udp   #Applied Parallel Research LM
+oc-lm		1448/tcp   #OpenConnect License Manager
+oc-lm		1448/udp   #OpenConnect License Manager
+peport		1449/tcp
+peport		1449/udp
+dwf		1450/tcp   #Tandem Distributed Workbench Facility
+dwf		1450/udp   #Tandem Distributed Workbench Facility
+infoman		1451/tcp   #IBM Information Management
+infoman		1451/udp   #IBM Information Management
+gtegsc-lm	1452/tcp   #GTE Government Systems License Man
+gtegsc-lm	1452/udp   #GTE Government Systems License Man
+genie-lm	1453/tcp   #Genie License Manager
+genie-lm	1453/udp   #Genie License Manager
+interhdl_elmd	1454/tcp   #interHDL License Manager
+interhdl_elmd	1454/udp   #interHDL License Manager
+esl-lm		1455/tcp   #ESL License Manager
+esl-lm		1455/udp   #ESL License Manager
+dca		1456/tcp
+dca		1456/udp
+valisys-lm	1457/tcp   #Valisys License Manager
+valisys-lm	1457/udp   #Valisys License Manager
+nrcabq-lm	1458/tcp   #Nichols Research Corp.
+nrcabq-lm	1458/udp   #Nichols Research Corp.
+proshare1	1459/tcp   #Proshare Notebook Application
+proshare1	1459/udp   #Proshare Notebook Application
+proshare2	1460/tcp   #Proshare Notebook Application
+proshare2	1460/udp   #Proshare Notebook Application
+ibm_wrless_lan	1461/tcp   #IBM Wireless LAN
+ibm_wrless_lan	1461/udp   #IBM Wireless LAN
+world-lm	1462/tcp   #World License Manager
+world-lm	1462/udp   #World License Manager
+nucleus		1463/tcp
+nucleus		1463/udp
+msl_lmd		1464/tcp   #MSL License Manager
+msl_lmd		1464/udp   #MSL License Manager
+pipes		1465/tcp   #Pipes Platform
+pipes		1465/udp   #Pipes Platform  mfarlin@peerlogic.com
+oceansoft-lm	1466/tcp   #Ocean Software License Manager
+oceansoft-lm	1466/udp   #Ocean Software License Manager
+csdmbase	1467/tcp
+csdmbase	1467/udp
+csdm		1468/tcp
+csdm		1468/udp
+aal-lm		1469/tcp   #Active Analysis Limited License Manager
+aal-lm		1469/udp   #Active Analysis Limited License Manager
+uaiact		1470/tcp   #Universal Analytics
+uaiact		1470/udp   #Universal Analytics
+csdmbase	1471/tcp
+csdmbase	1471/udp
+csdm		1472/tcp
+csdm		1472/udp
+openmath	1473/tcp
+openmath	1473/udp
+telefinder	1474/tcp
+telefinder	1474/udp
+taligent-lm	1475/tcp   #Taligent License Manager
+taligent-lm	1475/udp   #Taligent License Manager
+clvm-cfg	1476/tcp
+clvm-cfg	1476/udp
+ms-sna-server	1477/tcp
+ms-sna-server	1477/udp
+ms-sna-base	1478/tcp
+ms-sna-base	1478/udp
+dberegister	1479/tcp
+dberegister	1479/udp
+pacerforum	1480/tcp
+pacerforum	1480/udp
+airs		1481/tcp
+airs		1481/udp
+miteksys-lm	1482/tcp   #Miteksys License Manager
+miteksys-lm	1482/udp   #Miteksys License Manager
+afs		1483/tcp   #AFS License Manager
+afs		1483/udp   #AFS License Manager
+confluent	1484/tcp   #Confluent License Manager
+confluent	1484/udp   #Confluent License Manager
+lansource	1485/tcp
+lansource	1485/udp
+nms_topo_serv	1486/tcp
+nms_topo_serv	1486/udp
+localinfosrvr	1487/tcp
+localinfosrvr	1487/udp
+docstor		1488/tcp
+docstor		1488/udp
+dmdocbroker	1489/tcp
+dmdocbroker	1489/udp
+insitu-conf	1490/tcp
+insitu-conf	1490/udp
+anynetgateway	1491/tcp
+anynetgateway	1491/udp
+stone-design-1	1492/tcp
+stone-design-1	1492/udp
+netmap_lm	1493/tcp
+netmap_lm	1493/udp
+ica		1494/tcp
+ica		1494/udp
+cvc		1495/tcp
+cvc		1495/udp
+liberty-lm	1496/tcp
+liberty-lm	1496/udp
+rfx-lm		1497/tcp
+rfx-lm		1497/udp
+watcom-sql	1498/tcp
+watcom-sql	1498/udp
+fhc		1499/tcp   #Federico Heinz Consultora
+fhc		1499/udp   #Federico Heinz Consultora
+vlsi-lm		1500/tcp   #VLSI License Manager
+vlsi-lm		1500/udp   #VLSI License Manager
+sas-3		1501/tcp   #Satellite-data Acquisition System 3
+sas-3		1501/udp   #Satellite-data Acquisition System 3
+shivadiscovery	1502/tcp   #Shiva
+shivadiscovery	1502/udp   #Shiva
+imtc-mcs	1503/tcp   #Databeam
+imtc-mcs	1503/udp   #Databeam
+evb-elm		1504/tcp   #EVB Software Engineering License Manager
+evb-elm		1504/udp   #EVB Software Engineering License Manager
+funkproxy	1505/tcp   #Funk Software, Inc.
+funkproxy	1505/udp   #Funk Software, Inc.
+utcd		1506/tcp   #Universal Time daemon (utcd)
+utcd		1506/udp   #Universal Time daemon (utcd)
+symplex		1507/tcp
+symplex		1507/udp
+diagmond	1508/tcp
+diagmond	1508/udp
+robcad-lm	1509/tcp   #Robcad, Ltd. License Manager
+robcad-lm	1509/udp   #Robcad, Ltd. License Manager
+mvx-lm		1510/tcp   #Midland Valley Exploration Ltd. Lic. Man.
+mvx-lm		1510/udp   #Midland Valley Exploration Ltd. Lic. Man.
+3l-l1		1511/tcp
+3l-l1		1511/udp
+wins		1512/tcp   #Microsoft's Windows Internet Name Service
+wins		1512/udp   #Microsoft's Windows Internet Name Service
+fujitsu-dtc	1513/tcp   #Fujitsu Systems Business of America, Inc
+fujitsu-dtc	1513/udp   #Fujitsu Systems Business of America, Inc
+fujitsu-dtcns	1514/tcp   #Fujitsu Systems Business of America, Inc
+fujitsu-dtcns	1514/udp   #Fujitsu Systems Business of America, Inc
+ifor-protocol	1515/tcp
+ifor-protocol	1515/udp
+vpad		1516/tcp   #Virtual Places Audio data
+vpad		1516/udp   #Virtual Places Audio data
+vpac		1517/tcp   #Virtual Places Audio control
+vpac		1517/udp   #Virtual Places Audio control
+vpvd		1518/tcp   #Virtual Places Video data
+vpvd		1518/udp   #Virtual Places Video data
+vpvc		1519/tcp   #Virtual Places Video control
+vpvc		1519/udp   #Virtual Places Video control
+atm-zip-office	1520/tcp   #atm zip office
+atm-zip-office	1520/udp   #atm zip office
+ncube-lm	1521/tcp   #nCube License Manager
+ncube-lm	1521/udp   #nCube License Manager
+rna-lm		1522/tcp   #Ricardo North America License Manager
+rna-lm		1522/udp   #Ricardo North America License Manager
+cichild-lm	1523/tcp
+cichild-lm	1523/udp
+ingreslock	1524/tcp   #ingres
+ingreslock	1524/udp   #ingres
+prospero-np	1525/tcp   #Prospero Directory Service non-priv
+prospero-np	1525/udp   #Prospero Directory Service non-priv
+#PROBLEMS!========================================================
+orasrv		1525/tcp   #oracle
+orasrv		1525/udp   #oracle
+#PROBLEMS!========================================================
+pdap-np		1526/tcp   #Prospero Data Access Prot non-priv
+pdap-np		1526/udp   #Prospero Data Access Prot non-priv
+tlisrv		1527/tcp   #oracle
+tlisrv		1527/udp   #oracle
+mciautoreg	1528/tcp
+mciautoreg	1528/udp
+support		1529/tcp   prmsd gnatsd	# cygnus bug tracker
+coauthor	1529/tcp   #oracle
+coauthor	1529/udp   #oracle
+rap-service	1530/tcp
+rap-service	1530/udp
+rap-listen	1531/tcp
+rap-listen	1531/udp
+miroconnect	1532/tcp
+miroconnect	1532/udp
+virtual-places	1533/tcp   #Virtual Places Software
+virtual-places	1533/udp   #Virtual Places Software
+micromuse-lm	1534/tcp
+micromuse-lm	1534/udp
+ampr-info	1535/tcp
+ampr-info	1535/udp
+ampr-inter	1536/tcp
+ampr-inter	1536/udp
+sdsc-lm		1537/tcp
+sdsc-lm		1537/udp
+3ds-lm		1538/tcp
+3ds-lm		1538/udp
+intellistor-lm	1539/tcp   #Intellistor License Manager
+intellistor-lm	1539/udp   #Intellistor License Manager
+rds		1540/tcp
+rds		1540/udp
+rds2		1541/tcp
+rds2		1541/udp
+gridgen-elmd	1542/tcp
+gridgen-elmd	1542/udp
+simba-cs	1543/tcp
+simba-cs	1543/udp
+aspeclmd	1544/tcp
+aspeclmd	1544/udp
+vistium-share	1545/tcp
+vistium-share	1545/udp
+abbaccuray	1546/tcp
+abbaccuray	1546/udp
+laplink		1547/tcp
+laplink		1547/udp
+axon-lm		1548/tcp   #Axon License Manager
+axon-lm		1548/udp   #Axon License Manager
+shivahose	1549/tcp   #Shiva Hose
+shivasound	1549/udp   #Shiva Sound
+3m-image-lm	1550/tcp   #Image Storage license manager 3M Company
+3m-image-lm	1550/udp   #Image Storage license manager 3M Company
+hecmtl-db	1551/tcp
+hecmtl-db	1551/udp
+pciarray	1552/tcp
+pciarray	1552/udp
+issd		1600/tcp
+issd		1600/udp
+# IMPORTANT NOTE: Ports 1645/1646 are the traditional radius ports used by
+# many vendors without obtaining official IANA assignment.  The official
+# assignment is now ports 1812/1813 and users are encouraged to migrate
+# when possible to these new ports.
+#radius		1645/udp   #RADIUS authentication protocol (old)
+#radacct	1646/udp   #RADIUS accounting protocol (old)
+nkd		1650/tcp
+nkd		1650/udp
+shiva_confsrvr	1651/tcp
+shiva_confsrvr	1651/udp
+xnmp		1652/tcp
+xnmp		1652/udp
+netview-aix-1	1661/tcp
+netview-aix-1	1661/udp
+netview-aix-2	1662/tcp
+netview-aix-2	1662/udp
+netview-aix-3	1663/tcp
+netview-aix-3	1663/udp
+netview-aix-4	1664/tcp
+netview-aix-4	1664/udp
+netview-aix-5	1665/tcp
+netview-aix-5	1665/udp
+netview-aix-6	1666/tcp
+netview-aix-6	1666/udp
+netview-aix-7	1667/tcp
+netview-aix-7	1667/udp
+netview-aix-8	1668/tcp
+netview-aix-8	1668/udp
+netview-aix-9	1669/tcp
+netview-aix-9	1669/udp
+netview-aix-10	1670/tcp
+netview-aix-10	1670/udp
+netview-aix-11	1671/tcp
+netview-aix-11	1671/udp
+netview-aix-12	1672/tcp
+netview-aix-12	1672/udp
+l2f		1701/tcp   #l2f
+l2f		1701/udp   #l2f
+l2tp		1701/tcp   #Layer 2 Tunnelling Protocol
+l2tp		1701/udp   #Layer 2 Tunnelling Protocol
+pptp		1723/tcp   #Point-to-point tunnelling protocol
+# IMPORTANT NOTE: See comments for ports 1645/1646 when using older equipment
+radius		1812/udp   #RADIUS authentication protocol (IANA sanctioned)
+radacct		1813/udp   #RADIUS accounting protocol (IANA sanctioned)
+licensedaemon	1986/tcp   #cisco license management
+licensedaemon	1986/udp   #cisco license management
+tr-rsrb-p1	1987/tcp   #cisco RSRB Priority 1 port
+tr-rsrb-p1	1987/udp   #cisco RSRB Priority 1 port
+tr-rsrb-p2	1988/tcp   #cisco RSRB Priority 2 port
+tr-rsrb-p2	1988/udp   #cisco RSRB Priority 2 port
+tr-rsrb-p3	1989/tcp   #cisco RSRB Priority 3 port
+tr-rsrb-p3	1989/udp   #cisco RSRB Priority 3 port
+#PROBLEMS!===================================================
+mshnet		1989/tcp   #MHSnet system
+mshnet		1989/udp   #MHSnet system
+#PROBLEMS!===================================================
+stun-p1		1990/tcp   #cisco STUN Priority 1 port
+stun-p1		1990/udp   #cisco STUN Priority 1 port
+stun-p2		1991/tcp   #cisco STUN Priority 2 port
+stun-p2		1991/udp   #cisco STUN Priority 2 port
+stun-p3		1992/tcp   #cisco STUN Priority 3 port
+stun-p3		1992/udp   #cisco STUN Priority 3 port
+#PROBLEMS!===================================================
+ipsendmsg	1992/tcp
+ipsendmsg	1992/udp
+#PROBLEMS!===================================================
+snmp-tcp-port	1993/tcp   #cisco SNMP TCP port
+snmp-tcp-port	1993/udp   #cisco SNMP TCP port
+stun-port	1994/tcp   #cisco serial tunnel port
+stun-port	1994/udp   #cisco serial tunnel port
+perf-port	1995/tcp   #cisco perf port
+perf-port	1995/udp   #cisco perf port
+tr-rsrb-port	1996/tcp   #cisco Remote SRB port
+tr-rsrb-port	1996/udp   #cisco Remote SRB port
+gdp-port	1997/tcp   #cisco Gateway Discovery Protocol
+gdp-port	1997/udp   #cisco Gateway Discovery Protocol
+x25-svc-port	1998/tcp   #cisco X.25 service (XOT)
+x25-svc-port	1998/udp   #cisco X.25 service (XOT)
+tcp-id-port	1999/tcp   #cisco identification port
+tcp-id-port	1999/udp   #cisco identification port
+callbook	2000/tcp
+callbook	2000/udp
+dc		2001/tcp
+wizard		2001/udp   #curry
+globe		2002/tcp
+globe		2002/udp
+cfingerd	2003/tcp   #GNU finger
+mailbox		2004/tcp
+emce		2004/udp   #CCWS mm conf
+berknet		2005/tcp
+oracle		2005/udp
+invokator	2006/tcp
+raid-cc		2006/udp   #raid
+dectalk		2007/tcp
+raid-am		2007/udp
+conf		2008/tcp
+terminaldb	2008/udp
+news		2009/tcp
+whosockami	2009/udp
+search		2010/tcp
+pipe_server	2010/udp
+raid-cc		2011/tcp   #raid
+servserv	2011/udp
+ttyinfo		2012/tcp
+raid-ac		2012/udp
+raid-am		2013/tcp
+raid-cd		2013/udp
+troff		2014/tcp
+raid-sf		2014/udp
+cypress		2015/tcp
+raid-cs		2015/udp
+bootserver	2016/tcp
+bootserver	2016/udp
+cypress-stat	2017/tcp
+bootclient	2017/udp
+terminaldb	2018/tcp
+rellpack	2018/udp
+whosockami	2019/tcp
+about		2019/udp
+xinupageserver	2020/tcp
+xinupageserver	2020/udp
+servexec	2021/tcp
+xinuexpansion1	2021/udp
+down		2022/tcp
+xinuexpansion2	2022/udp
+xinuexpansion3	2023/tcp
+xinuexpansion3	2023/udp
+xinuexpansion4	2024/tcp
+xinuexpansion4	2024/udp
+ellpack		2025/tcp
+xribs		2025/udp
+scrabble	2026/tcp
+scrabble	2026/udp
+shadowserver	2027/tcp
+shadowserver	2027/udp
+submitserver	2028/tcp
+submitserver	2028/udp
+device2		2030/tcp
+device2		2030/udp
+blackboard	2032/tcp
+blackboard	2032/udp
+glogger		2033/tcp
+glogger		2033/udp
+scoremgr	2034/tcp
+scoremgr	2034/udp
+imsldoc		2035/tcp
+imsldoc		2035/udp
+objectmanager	2038/tcp
+objectmanager	2038/udp
+lam		2040/tcp
+lam		2040/udp
+interbase	2041/tcp
+interbase	2041/udp
+isis		2042/tcp
+isis		2042/udp
+isis-bcast	2043/tcp
+isis-bcast	2043/udp
+rimsl		2044/tcp
+rimsl		2044/udp
+cdfunc		2045/tcp
+cdfunc		2045/udp
+sdfunc		2046/tcp
+sdfunc		2046/udp
+#dls		2047/tcp
+#dls		2047/udp
+dls-monitor	2048/tcp
+dls-monitor	2048/udp
+nfsd		2049/tcp   nfs		# NFS server daemon
+nfsd		2049/udp   nfs		# NFS server daemon
+#PROBLEMS!=============================================================
+#shilp		2049/tcp
+#shilp		2049/udp
+#PROBLEMS!=============================================================
+dlsrpn		2065/tcp   #Data Link Switch Read Port Number
+dlsrpn		2065/udp   #Data Link Switch Read Port Number
+dlswpn		2067/tcp   #Data Link Switch Write Port Number
+dlswpn		2067/udp   #Data Link Switch Write Port Number
+zephyr-clt	2103/udp   #Zephyr serv-hm connection
+zephyr-hm	2104/udp   #Zephyr hostmanager
+#PROBLEMS!=============================================================
+#zephyr-hm-srv	2105/udp   #Zephyr hm-serv connection
+#PROBLEMS!=============================================================
+eklogin		2105/tcp   #Kerberos (v4) encrypted rlogin
+eklogin		2105/udp   #Kerberos (v4) encrypted rlogin
+ekshell		2106/tcp   #Kerberos (v4) encrypted rshell
+ekshell		2106/udp   #Kerberos (v4) encrypted rshell
+rkinit		2108/tcp   #Kerberos (v4) remote initialization
+rkinit		2108/udp   #Kerberos (v4) remote initialization
+ats		2201/tcp   #Advanced Training System Program
+ats		2201/udp   #Advanced Training System Program
+ivs-video	2232/tcp   #IVS Video default
+ivs-video	2232/udp   #IVS Video default
+ivsd		2241/tcp   #IVS Daemon
+ivsd		2241/udp   #IVS Daemon
+pehelp		2307/tcp
+pehelp		2307/udp
+cvspserver	2401/tcp   #CVS network server
+cvspserver	2401/udp   #CVS network server
+venus		2430/tcp   #venus
+venus		2430/udp   #venus
+venus-se	2431/tcp   #venus-se
+venus-se	2431/udp   #venus-se
+codasrv		2432/tcp   #codasrv
+codasrv		2432/udp   #codasrv
+codasrv-se	2433/tcp   #codasrv-se
+codasrv-se	2433/udp   #codasrv-se
+rtsserv		2500/tcp   #Resource Tracking system server
+rtsserv		2500/udp   #Resource Tracking system server
+rtsclient	2501/tcp   #Resource Tracking system client
+rtsclient	2501/udp   #Resource Tracking system client
+hp-3000-telnet	2564/tcp   #HP 3000 NS/VT block mode telnet
+zebrasrv	2600/tcp   #zebra service
+zebra		2601/tcp   #zebra vty
+ripd		2602/tcp   #RIPd vty
+ripngd		2603/tcp   #RIPngd vty
+ospfd		2604/tcp   #OSPFd vty
+bgpd		2605/tcp   #BGPd vty
+ospf6d		2606/tcp   #OSPF6d vty
+dict		2628/tcp   #RFC 2229
+dict		2628/udp   #RFC 2229
+listen		2766/tcp   #System V listener port
+www-dev		2784/tcp   #world wide web - development
+www-dev		2784/udp   #world wide web - development
+eppc		3031/tcp   #Remote AppleEvents/PPC Toolbox
+eppc		3031/udp   #Remote AppleEvents/PPC Toolbox
+NSWS		3049/tcp
+NSWS		3049/udp
+gds_db		3050/tcp   #InterBase Database Remote Protocol
+gds_db		3050/udp   #InterBase Database Remote Protocol
+sj3		3086/tcp   #SJ3 (kanji input)
+vmodem		3141/tcp
+vmodem		3141/udp
+ccmail		3264/tcp   #cc:mail/lotus
+ccmail		3264/udp   #cc:mail/lotus
+dec-notes	3333/tcp   #DEC Notes
+dec-notes	3333/udp   #DEC Notes
+rdp		3389/tcp   #Microsoft Remote Desktop Protocol
+bmap		3421/tcp   #Bull Apprise portmapper
+bmap		3421/udp   #Bull Apprise portmapper
+prsvp		3455/tcp   #RSVP Port
+prsvp		3455/udp   rsvp-encap	#RSVP Port
+vat		3456/tcp   #VAT default data
+vat		3456/udp   #VAT default data
+vat-control	3457/tcp   #VAT default control
+vat-control	3457/udp   #VAT default control
+nut		3493/tcp   #Network UPS Tools
+nut		3493/udp   #Network UPS Tools
+tsp		3653/tcp   #Tunnel Setup Protocol
+tsp		3653/udp   #Tunnel Setup Protocol
+svn		3690/tcp   #Subversion
+svn		3690/udp   #Subversion
+udt_os		3900/tcp   #Unidata UDT OS
+udt_os		3900/udp   #Unidata UDT OS
+mapper-nodemgr	3984/tcp   #MAPPER network node manager
+mapper-nodemgr	3984/udp   #MAPPER network node manager
+mapper-mapethd	3985/tcp   #MAPPER TCP/IP server
+mapper-mapethd	3985/udp   #MAPPER TCP/IP server
+mapper-ws_ethd	3986/tcp   #MAPPER workstation server
+mapper-ws_ethd	3986/udp   #MAPPER workstation server
+netcheque	4008/tcp   #NetCheque accounting
+netcheque	4008/udp   #NetCheque accounting
+lockd		4045/udp   # NFS lock daemon/manager
+lockd		4045/tcp
+nuts_dem	4132/tcp   #NUTS Daemon
+nuts_dem	4132/udp   #NUTS Daemon
+nuts_bootp	4133/tcp   #NUTS Bootp Server
+nuts_bootp	4133/udp   #NUTS Bootp Server
+rwhois		4321/tcp   #Remote Who Is
+rwhois		4321/udp   #Remote Who Is
+unicall		4343/tcp
+unicall		4343/udp
+krb524		4444/tcp
+krb524		4444/udp
+# PROBLEM krb524 assigned the port,
+# PROBLEM nv used it without an assignment
+nv-video	4444/tcp   #NV Video default
+nv-video	4444/udp   #NV Video default
+sae-urn		4500/tcp
+sae-urn		4500/udp
+fax		4557/tcp   #FAX transmission service
+hylafax		4559/tcp   #HylaFAX client-server protocol
+rfa		4672/tcp   #remote file access server
+rfa		4672/udp   #remote file access server
+commplex-main	5000/tcp
+commplex-main	5000/udp
+commplex-link	5001/tcp
+commplex-link	5001/udp
+rfe		5002/tcp   #radio free ethernet
+rfe		5002/udp   #radio free ethernet
+telelpathstart	5010/tcp
+telelpathstart	5010/udp
+telelpathattack	5011/tcp
+telelpathattack	5011/udp
+mmcc		5050/tcp   #multimedia conference control tool
+mmcc		5050/udp   #multimedia conference control tool
+rmonitor_secure	5145/tcp
+rmonitor_secure	5145/udp
+aol		5190/tcp   #America-Online
+aol		5190/udp   #America-Online
+aol-1		5191/tcp   #AmericaOnline1
+aol-1		5191/udp   #AmericaOnline1
+aol-2		5192/tcp   #AmericaOnline2
+aol-2		5192/udp   #AmericaOnline2
+aol-3		5193/tcp   #AmericaOnline3
+aol-3		5193/udp   #AmericaOnline3
+jabber-client	5222/tcp   #Jabber Client Connection
+jabber-client	5222/udp   #Jabber Client Connection
+padl2sim	5236/tcp
+padl2sim	5236/udp
+jabber-server	5269/tcp   #Jabber Server Connection
+jabber-server	5269/udp   #Jabber Server Connection
+hacl-hb		5300/tcp   # HA cluster heartbeat
+hacl-hb		5300/udp   # HA cluster heartbeat
+hacl-gs		5301/tcp   # HA cluster general services
+hacl-gs		5301/udp   # HA cluster general services
+hacl-cfg	5302/tcp   # HA cluster configuration
+hacl-cfg	5302/udp   # HA cluster configuration
+hacl-probe	5303/tcp   # HA cluster probing
+hacl-probe	5303/udp   # HA cluster probing
+hacl-local	5304/tcp
+hacl-local	5304/udp
+hacl-test	5305/tcp
+hacl-test	5305/udp
+cfengine	5308/tcp
+cfengine	5308/udp
+mdns		5353/tcp   #Multicast DNS
+mdns		5353/udp   #Multicast DNS
+postgresql	5432/tcp   #PostgreSQL Database
+postgresql	5432/udp   #PostgreSQL Database
+rplay		5555/udp
+canna		5680/tcp   #Canna (Japanese Input)
+proshareaudio	5713/tcp   #proshare conf audio
+proshareaudio	5713/udp   #proshare conf audio
+prosharevideo	5714/tcp   #proshare conf video
+prosharevideo	5714/udp   #proshare conf video
+prosharedata	5715/tcp   #proshare conf data
+prosharedata	5715/udp   #proshare conf data
+prosharerequest	5716/tcp   #proshare conf request
+prosharerequest	5716/udp   #proshare conf request
+prosharenotify	5717/tcp   #proshare conf notify
+prosharenotify	5717/udp   #proshare conf notify
+cvsup		5999/tcp   #CVSup file transfer/John Polstra/FreeBSD
+x11		6000/tcp   #6000-6063 are assigned to X Window System
+x11		6000/udp
+x11-ssh		6010/tcp   #Unofficial name, for convenience
+x11-ssh		6010/udp
+softcm		6110/tcp   #HP SoftBench CM
+softcm		6110/udp   #HP SoftBench CM
+spc		6111/tcp   #HP SoftBench Sub-Process Control
+spc		6111/udp   #HP SoftBench Sub-Process Control
+meta-corp	6141/tcp   #Meta Corporation License Manager
+meta-corp	6141/udp   #Meta Corporation License Manager
+aspentec-lm	6142/tcp   #Aspen Technology License Manager
+aspentec-lm	6142/udp   #Aspen Technology License Manager
+watershed-lm	6143/tcp   #Watershed License Manager
+watershed-lm	6143/udp   #Watershed License Manager
+statsci1-lm	6144/tcp   #StatSci License Manager - 1
+statsci1-lm	6144/udp   #StatSci License Manager - 1
+statsci2-lm	6145/tcp   #StatSci License Manager - 2
+statsci2-lm	6145/udp   #StatSci License Manager - 2
+lonewolf-lm	6146/tcp   #Lone Wolf Systems License Manager
+lonewolf-lm	6146/udp   #Lone Wolf Systems License Manager
+montage-lm	6147/tcp   #Montage License Manager
+montage-lm	6147/udp   #Montage License Manager
+ricardo-lm	6148/tcp   #Ricardo North America License Manager
+ricardo-lm	6148/udp   #Ricardo North America License Manager
+xdsxdm		6558/tcp
+xdsxdm		6558/udp
+ircd		6667/tcp   #Internet Relay Chat (unoffical)
+acmsoda		6969/tcp
+acmsoda		6969/udp
+afs3-fileserver	7000/tcp   #file server itself
+afs3-fileserver	7000/udp   #file server itself
+afs3-callback	7001/tcp   #callbacks to cache managers
+afs3-callback	7001/udp   #callbacks to cache managers
+afs3-prserver	7002/tcp   #users & groups database
+afs3-prserver	7002/udp   #users & groups database
+afs3-vlserver	7003/tcp   #volume location database
+afs3-vlserver	7003/udp   #volume location database
+afs3-kaserver	7004/tcp   #AFS/Kerberos authentication service
+afs3-kaserver	7004/udp   #AFS/Kerberos authentication service
+afs3-volser	7005/tcp   #volume management server
+afs3-volser	7005/udp   #volume management server
+afs3-errors	7006/tcp   #error interpretation service
+afs3-errors	7006/udp   #error interpretation service
+afs3-bos	7007/tcp   #basic overseer process
+afs3-bos	7007/udp   #basic overseer process
+afs3-update	7008/tcp   #server-to-server updater
+afs3-update	7008/udp   #server-to-server updater
+afs3-rmtsys	7009/tcp   #remote cache manager service
+afs3-rmtsys	7009/udp   #remote cache manager service
+afs3-resserver	7010/tcp   #MR-AFS residence server
+afs3-resserver	7010/udp   #MR-AFS residence server
+ups-onlinet	7010/tcp   #onlinet uninterruptable power supplies
+ups-onlinet	7010/udp   #onlinet uninterruptable power supplies
+afs3-remio	7011/tcp   #MR-AFS remote IO server
+afs3-remio	7011/udp   #MR-AFS remote IO server
+font-service	7100/tcp   #X Font Service
+font-service	7100/udp   #X Font Service
+fodms		7200/tcp   #FODMS FLIP
+fodms		7200/udp   #FODMS FLIP
+dlip		7201/tcp
+dlip		7201/udp
+ftp-proxy	8021/tcp   # FTP proxy
+natd		8668/divert # Network Address Translation
+jetdirect	9100/tcp   #HP JetDirect card
+git		9418/tcp   # Git Version Control System
+man		9535/tcp
+man		9535/udp
+sd		9876/tcp   #Session Director
+sd		9876/udp   #Session Director
+amanda		10080/udp  #Dump server control
+amandaidx	10082/tcp  #Amanda indexing
+amidxtape	10083/tcp  #Amanda tape indexing
+isode-dua	17007/tcp
+isode-dua	17007/udp
+biimenu		18000/tcp  #Beckman Instruments, Inc.
+biimenu		18000/udp  #Beckman Instruments, Inc.
+wnn4		22273/tcp  wnn6		#Wnn4 (Japanese input)
+wnn4_Cn		22289/tcp  wnn6_Cn	#Wnn4 (Chinese input)
+wnn4_Kr		22305/tcp  wnn6_Kr	#Wnn4 (Korean input)
+wnn4_Tw		22321/tcp  wnn6_Tw	#Wnn4 (Taiwanse input)
+wnn6_DS		26208/tcp  #Wnn6 (Dserver)
+dbbrowse	47557/tcp  #Databeam Corporation
+dbbrowse	47557/udp  #Databeam Corporation
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/shadow b/target/device/Atmel/atstk1005/target_skeleton/etc/shadow
new file mode 100644
index 000000000..d5dc3974d
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/shadow
@@ -0,0 +1,18 @@
+root:$1$OJeedGT3$uG0eWkNhkeq0WO6Wldk1Y.:13200:0:99999:7:::
+daemon:!:13200:0:99999:7:::
+bin:!:13200:0:99999:7:::
+sys:!:13200:0:99999:7:::
+sync:!:13200:0:99999:7:::
+mail:!:13200:0:99999:7:::
+proxy:!:13200:0:99999:7:::
+www-data:!:13200:0:99999:7:::
+backup:!:13200:0:99999:7:::
+operator:!:13200:0:99999:7:::
+haldaemon:!:13200:0:99999:7:::
+dbus:!:13200:0:99999:7:::
+ftp:!:13200:0:99999:7:::
+dnsmasq:!:13200:0:99999:7:::
+sshd:!:13200:0:99999:7:::
+nobody:!:13200:0:99999:7:::
+avr32:$1$TVWxUVs7$/ze18sFeD6F26w0hgyB6M.:13200:0:99999:7:::
+default:!:13200:0:99999:7:::
diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/shells b/target/device/Atmel/atstk1005/target_skeleton/etc/shells
new file mode 100644
index 000000000..6ee110ced
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/etc/shells
@@ -0,0 +1,8 @@
+# /etc/shells: valid login shells
+/bin/ash
+/bin/sh
+/bin/zsh
+/bin/bash
+/usr/bin/zsh
+/usr/bin/bash
+/usr/bin/screen
diff --git a/target/device/Atmel/atstk1005/target_skeleton/root/.bash_logout b/target/device/Atmel/atstk1005/target_skeleton/root/.bash_logout
new file mode 100644
index 000000000..77ef1f950
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/root/.bash_logout
@@ -0,0 +1,7 @@
+# ~/.bash_logout: executed by bash(1) when login shell exits.
+
+# when leaving the console clear the screen to increase privacy
+
+case "`tty`" in
+    /dev/tty[0-9]*) clear
+esac
diff --git a/target/device/Atmel/atstk1005/target_skeleton/root/.bash_profile b/target/device/Atmel/atstk1005/target_skeleton/root/.bash_profile
new file mode 100644
index 000000000..27bf14953
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/root/.bash_profile
@@ -0,0 +1,15 @@
+# .bash_profile
+
+export PATH=\
+/bin:\
+/sbin:\
+/usr/bin:\
+/usr/sbin:\
+/usr/bin/X11:\
+/usr/local/bin
+
+umask 022
+
+if [ -f ~/.bashrc ]; then
+    source ~/.bashrc
+fi
diff --git a/target/device/Atmel/atstk1005/target_skeleton/root/.bashrc b/target/device/Atmel/atstk1005/target_skeleton/root/.bashrc
new file mode 100644
index 000000000..d13c8f902
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/root/.bashrc
@@ -0,0 +1,48 @@
+# ~/.bashrc: executed by bash(1) for non-login interactive shells.
+
+export PATH=\
+/bin:\
+/sbin:\
+/usr/bin:\
+/usr/sbin:\
+/usr/bin/X11:\
+/usr/local/bin
+
+# If running interactively, then:
+if [ "$PS1" ]; then
+
+    if [ "$BASH" ]; then
+	export PS1="[\u@\h \W]\\$ "
+    else
+      if [ "`id -u`" -eq 0 ]; then 
+	export PS1='# '
+      else
+	export PS1='$ '
+      fi
+    fi
+
+    export USER=`id -un`
+    export LOGNAME=$USER
+    export HOSTNAME=`/bin/hostname`
+    export HISTSIZE=1000
+    export HISTFILESIZE=1000
+    export PAGER='/bin/more '
+    export EDITOR='/bin/vi'
+    export INPUTRC=/etc/inputrc
+    export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
+    export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
+
+    ### Some aliases
+    alias ps2='ps facux '
+    alias ps1='ps faxo "%U %t %p %a" '
+    alias af='ps af'
+    alias cls='clear'
+    alias ll='/bin/ls --color=tty -laFh'
+    alias ls='/bin/ls --color=tty -F'
+    alias df='df -h'
+    alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
+    #alias bc='bc -l'
+    alias minicom='minicom -c on'
+    alias calc='calc -Cd '
+    alias bc='calc -Cd '
+fi;
diff --git a/target/device/Atmel/atstk1005/target_skeleton/sys/.empty b/target/device/Atmel/atstk1005/target_skeleton/sys/.empty
new file mode 100644
index 000000000..e69de29bb
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/sys/.empty
diff --git a/target/device/Atmel/atstk1005/target_skeleton/usr/share/udhcpc/default.script b/target/device/Atmel/atstk1005/target_skeleton/usr/share/udhcpc/default.script
new file mode 100644
index 000000000..56cbaf6c4
--- /dev/null
+++ b/target/device/Atmel/atstk1005/target_skeleton/usr/share/udhcpc/default.script
@@ -0,0 +1,19 @@
+#!/bin/sh
+
+
+case $1 in
+    deconfig)
+	ifconfig $interface 0.0.0.0
+	;;
+    bound|renew)
+	ifconfig $interface $ip netmask $subnet broadcast $broadcast
+	route add default gw $router
+	echo -n > /etc/resolv.conf
+	[ -z "$domain" ] || echo "domain $domain" >> /etc/resolv.conf
+	for n in $dns; do echo "nameserver $n" >> /etc/resolv.conf; done
+	if [ ! -z "$hostname" ]; then
+		echo $hostname > /etc/hostname
+		hostname $hostname
+	fi
+	;;
+esac