u-boot: remove arch specific patches infrastructure

A very complicated infrastructure for just a special case, for an
ancient version of U-Boot. Recent versions of U-Boot are reported to
work just fine on Atmel ARM evaluation boards.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

17 files changed, 0 insertions, 4216 deletions

diff --git a/target/device/Atmel/arch-arm/Makefile.in b/target/device/Atmel/arch-arm/Makefile.in
deleted file mode 100644
index e4ca5434b..000000000
--- a/target/device/Atmel/arch-arm/Makefile.in
+++ /dev/null
@@ -1,2 +0,0 @@
-include target/device/Atmel/arch-arm/u-boot/Makefile.in
-
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-001-at91rm9200.patch b/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-001-at91rm9200.patch
deleted file mode 100644
index 0445b2329..000000000
--- a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-001-at91rm9200.patch
+++ /dev/null
@@ -1,723 +0,0 @@
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/at91_pio.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/at91_pio.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/at91_pio.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/at91_pio.h	2009-01-01 14:02:28.000000000 +0100
-@@ -0,0 +1,49 @@
-+/*
-+ * [origin: Linux kernel include/asm-arm/arch-at91/at91_pio.h]
-+ *
-+ * Copyright (C) 2005 Ivan Kokshaysky
-+ * Copyright (C) SAN People
-+ *
-+ * Parallel I/O Controller (PIO) - System peripherals registers.
-+ * Based on AT91RM9200 datasheet revision E.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91_PIO_H
-+#define AT91_PIO_H
-+
-+#define PIO_PER		0x00	/* Enable Register */
-+#define PIO_PDR		0x04	/* Disable Register */
-+#define PIO_PSR		0x08	/* Status Register */
-+#define PIO_OER		0x10	/* Output Enable Register */
-+#define PIO_ODR		0x14	/* Output Disable Register */
-+#define PIO_OSR		0x18	/* Output Status Register */
-+#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
-+#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
-+#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
-+#define PIO_SODR	0x30	/* Set Output Data Register */
-+#define PIO_CODR	0x34	/* Clear Output Data Register */
-+#define PIO_ODSR	0x38	/* Output Data Status Register */
-+#define PIO_PDSR	0x3c	/* Pin Data Status Register */
-+#define PIO_IER		0x40	/* Interrupt Enable Register */
-+#define PIO_IDR		0x44	/* Interrupt Disable Register */
-+#define PIO_IMR		0x48	/* Interrupt Mask Register */
-+#define PIO_ISR		0x4c	/* Interrupt Status Register */
-+#define PIO_MDER	0x50	/* Multi-driver Enable Register */
-+#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
-+#define PIO_MDSR	0x58	/* Multi-driver Status Register */
-+#define PIO_PUDR	0x60	/* Pull-up Disable Register */
-+#define PIO_PUER	0x64	/* Pull-up Enable Register */
-+#define PIO_PUSR	0x68	/* Pull-up Status Register */
-+#define PIO_ASR		0x70	/* Peripheral A Select Register */
-+#define PIO_BSR		0x74	/* Peripheral B Select Register */
-+#define PIO_ABSR	0x78	/* AB Status Register */
-+#define PIO_OWER	0xa0	/* Output Write Enable Register */
-+#define PIO_OWDR	0xa4	/* Output Write Disable Register */
-+#define PIO_OWSR	0xa8	/* Output Write Status Register */
-+
-+#endif
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/at91_pmc.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/at91_pmc.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/at91_pmc.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/at91_pmc.h	2009-01-01 15:51:28.000000000 +0100
-@@ -0,0 +1,116 @@
-+/*
-+ * [origin: Linux kernel include/asm-arm/arch-at91/at91_pmc.h]
-+ *
-+ * Copyright (C) 2005 Ivan Kokshaysky
-+ * Copyright (C) SAN People
-+ *
-+ * Copyright (C) 2008 Ulf Samuelsson
-+ *
-+ * Power Management Controller (PMC) - System peripherals registers.
-+ * Based on AT91RM9200 datasheet revision E.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91_PMC_H
-+#define AT91_PMC_H
-+
-+#define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
-+#define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
-+
-+#define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
-+#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
-+#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
-+#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-+#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
-+#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
-+#define		AT91CAP9_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91CAP9 only] */
-+#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
-+#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
-+#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
-+#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
-+#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
-+#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
-+#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
-+#define	AT91_PMC_RES_0C		(AT91_PMC + 0x0c)	/* Reserved */
-+
-+#define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
-+#define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
-+#define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
-+#define	AT91_PMC_RES_1C		(AT91_PMC + 0x1c)	/* Reserved */
-+
-+
-+#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
-+#define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
-+#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [AT91SAM926x only] */
-+#define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
-+
-+#define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
-+#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
-+#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
-+
-+#define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
-+#define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
-+#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
-+#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
-+#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
-+#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
-+#define		AT91_PMC_USBDIV		(3     << 28)		/* USB Divisor (PLLB only) */
-+#define			AT91_PMC_USBDIV_1		(0 << 28)
-+#define			AT91_PMC_USBDIV_2		(1 << 28)
-+#define			AT91_PMC_USBDIV_4		(2 << 28)
-+#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
-+
-+#define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
-+#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
-+#define			AT91_PMC_CSS_SLOW		(0 << 0)
-+#define			AT91_PMC_CSS_MAIN		(1 << 0)
-+#define			AT91_PMC_CSS_PLLA		(2 << 0)
-+#define			AT91_PMC_CSS_PLLB		(3 << 0)
-+#define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
-+#define			AT91_PMC_PRES_1			(0 << 2)
-+#define			AT91_PMC_PRES_2			(1 << 2)
-+#define			AT91_PMC_PRES_4			(2 << 2)
-+#define			AT91_PMC_PRES_8			(3 << 2)
-+#define			AT91_PMC_PRES_16		(4 << 2)
-+#define			AT91_PMC_PRES_32		(5 << 2)
-+#define			AT91_PMC_PRES_64		(6 << 2)
-+#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
-+#define			AT91_PMC_MDIV_1			(0 << 8)
-+#define			AT91_PMC_MDIV_2			(1 << 8)
-+#define			AT91_PMC_MDIV_3			(2 << 8)
-+#define			AT91_PMC_MDIV_4			(3 << 8)
-+
-+#define	AT91_PMC_RES_34		(AT91_PMC + 0x34)	/* Reserved */
-+#define	AT91_PMC_RES_38		(AT91_PMC + 0x38)	/* Reserved */
-+#define	AT91_PMC_RES_3C		(AT91_PMC + 0x3c)	/* Reserved */
-+
-+#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
-+
-+#define	AT91_PMC_RES_50		(AT91_PMC + 0x50)	/* Reserved */
-+#define	AT91_PMC_RES_54		(AT91_PMC + 0x54)	/* Reserved */
-+#define	AT91_PMC_RES_58		(AT91_PMC + 0x58)	/* Reserved */
-+#define	AT91_PMC_RES_5C		(AT91_PMC + 0x5c)	/* Reserved */
-+
-+#define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
-+#define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
-+#define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
-+#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
-+#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
-+#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
-+#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
-+#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
-+#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
-+#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
-+#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
-+#define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
-+
-+#define AT91_PMC_PROT		(AT91_PMC + 0xe4)	/* Protect Register [AT91CAP9 revC only] */
-+#define		AT91_PMC_PROTKEY	0x504d4301		/* Activation Code */
-+
-+#define AT91_PMC_VER	(AT91_PMC + 0xfc)	/* PMC Module Version [AT91CAP9 only] */
-+
-+#endif
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/AT91RM9200.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/AT91RM9200.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/AT91RM9200.h	2009-01-01 13:09:34.000000000 +0100
-+++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/AT91RM9200.h	2009-01-01 15:52:00.000000000 +0100
-@@ -28,6 +28,114 @@
- #ifndef __ASSEMBLY__
- typedef volatile unsigned int AT91_REG;		/* Hardware register definition */
- 
-+/*
-+ * Peripheral identifiers/interrupts.
-+ */
-+#define AT91RM9200_ID_AIC	0	/* Advanced Interrupt Controller (FIQ) */
-+#define AT91RM9200_ID_SYSIRQ	1	/* System Peripherals */
-+#define AT91RM9200_ID_PIOA	2	/* Parallel IO Controller A */
-+#define AT91RM9200_ID_PIOB	3	/* Parallel IO Controller B */
-+#define AT91RM9200_ID_PIOC	4	/* Parallel IO Controller C */
-+#define AT91RM9200_ID_PIOD	5	/* Parallel IO Controller D */
-+#define AT91RM9200_ID_US0	6	/* USART 0 */
-+#define AT91RM9200_ID_US1	7	/* USART 1 */
-+#define AT91RM9200_ID_US2	8	/* USART 2 */
-+#define AT91RM9200_ID_US3	9	/* USART 2 */
-+#define AT91RM9200_ID_MCI	10	/* Multimedia Card Interface */
-+#define AT91RM9200_ID_UDP	11	/* USB Device Port */
-+#define AT91RM9200_ID_TWI	12	/* Two-Wire Interface */
-+#define AT91RM9200_ID_SPI0	13	/* Serial Peripheral Interface 0 */
-+#define AT91RM9200_ID_SSC0	14	/* Serial Synchronous Controller */
-+#define AT91RM9200_ID_SSC1	15	/* Serial Synchronous Controller */
-+#define AT91RM9200_ID_SSC2	16	/* Serial Synchronous Controller */
-+#define AT91RM9200_ID_TC0	17	/* Timer Counter 0 */
-+#define AT91RM9200_ID_TC1	18	/* Timer Counter 1 */
-+#define AT91RM9200_ID_TC2	19	/* Timer Counter 2 */
-+#define AT91RM9200_ID_TC3	20	/* Timer Counter 3 */
-+#define AT91RM9200_ID_TC4	21	/* Timer Counter 4 */
-+#define AT91RM9200_ID_TC5	22	/* Timer Counter 5 */
-+#define AT91RM9200_ID_UHP	23	/* USB Host port */
-+#define AT91RM9200_ID_EMAC	24	/* Ethernet */
-+#define AT91RM9200_ID_IRQ0	25	/* Advanced Interrupt Controller (IRQ0) */
-+#define AT91RM9200_ID_IRQ1	26	/* Advanced Interrupt Controller (IRQ1) */
-+#define AT91RM9200_ID_IRQ2	27	/* Advanced Interrupt Controller (IRQ2) */
-+#define AT91RM9200_ID_IRQ3	28	/* Advanced Interrupt Controller (IRQ3) */
-+#define AT91RM9200_ID_IRQ4	29	/* Advanced Interrupt Controller (IRQ4) */
-+#define AT91RM9200_ID_IRQ5	30	/* Advanced Interrupt Controller (IRQ5) */
-+#define AT91RM9200_ID_IRQ6	31	/* Advanced Interrupt Controller (IRQ6) */
-+/*
-+ * User Peripheral physical base addresses.
-+ */
-+
-+
-+
-+#define AT91RM9200_BASE_TC0	0xFFFA0000 /* (TC0) Base Address */
-+#define AT91RM9200_BASE_TC1	0xFFFA4000 /* (TC0) Base Address */
-+#define AT91RM9200_BASE_UDP	0xFFFB0000 /* (TC0) Base Address */
-+#define AT91RM9200_BASE_MCI	0xFFFB4000 /* (TC0) Base Address */
-+#define AT91RM9200_BASE_TWI	0xFFFB8000 /* (TC0) Base Address */
-+#define AT91RM9200_BASE_EMAC	0xFFFBC000 /* (EMAC) Base Address */
-+#define AT91RM9200_BASE_US0	0xFFFC0000 /* (US0) Base Address */
-+#define AT91RM9200_BASE_US1	0xFFFC4000 /* (US1) Base Address */
-+#define AT91RM9200_BASE_US2	0xFFFC8000 /* (US1) Base Address */
-+#define AT91RM9200_BASE_US3	0xFFFCC000 /* (US1) Base Address */
-+#define AT91RM9200_BASE_SPI	0xFFFE0000 /* (SPI) Base Address */
-+
-+#define AT91RM9200_BASE_AIC	0xFFFFF000 /* (AIC) Base Address */
-+#define AT91RM9200_BASE_DBGU	0xFFFFF200 /* (DBGU) Base Address */
-+#define AT91RM9200_BASE_PIOA	0xFFFFF400 /* (PIOA) Base Address */
-+#define AT91RM9200_BASE_PIOB	0xFFFFF600 /* (PIOB) Base Address */
-+#define AT91RM9200_BASE_PIOC	0xFFFFF800 /* (PIOC) Base Address */
-+#define AT91RM9200_BASE_PIOD	0xFFFFFA00 /* (PIOC) Base Address */
-+#define AT91RM9200_BASE_PMC	0xFFFFFC00 /* (PMC) Base Address */
-+#define AT91RM9200_BASE_CKGR	0xFFFFFC20 /* (CKGR) Base Address */
-+#define AT91RM9200_BASE_ST	0xFFFFFD00 /* (PMC) Base Address */
-+#define AT91RM9200_BASE_RTC	0xFFFFFE00 /* (PMC) Base Address */
-+#define AT91RM9200_BASE_MC	0xFFFFFF00 /* (PMC) Base Address */
-+#define AT91RM9200_BASE_EBI	0xFFFFFF60 /* (PMC) Base Address */
-+#define AT91RM9200_BASE_SMC2	0xFFFFFF70 /* (SMC2) Base Address */
-+#define AT91RM9200_BASE_SDRAMC	0xFFFFFF90 /* (SMC2) Base Address */
-+#define AT91RM9200_BASE_BFC	0xFFFFFFC0 /* (SMC2) Base Address */
-+
-+/*
-+ * System Peripherals (offset from AT91_BASE_SYS)
-+ */
-+#define AT91_BASE_SYS		AT91RM9200_BASE_AIC
-+
-+#define AT91_AIC		(AT91RM9200_BASE_AIC	- AT91_BASE_SYS)
-+#define AT91_DBGU		(AT91RM9200_BASE_DBGU	- AT91_BASE_SYS)
-+#define AT91_PIOA		(AT91RM9200_BASE_PIOA	- AT91_BASE_SYS)
-+#define AT91_PIOB		(AT91RM9200_BASE_PIOB	- AT91_BASE_SYS)
-+#define AT91_PIOC		(AT91RM9200_BASE_PIOC	- AT91_BASE_SYS)
-+#define AT91_PIOD		(AT91RM9200_BASE_PIOD	- AT91_BASE_SYS)
-+#define AT91_PMC		(AT91RM9200_BASE_PMC	- AT91_BASE_SYS)
-+#define AT91_PMC		(AT91RM9200_BASE_PMC	- AT91_BASE_SYS)
-+#define AT91_PMC		(AT91RM9200_BASE_PMC	- AT91_BASE_SYS)
-+#define AT91_PMC		(AT91RM9200_BASE_PMC	- AT91_BASE_SYS)
-+#define AT91_PMC		(AT91RM9200_BASE_PMC	- AT91_BASE_SYS)
-+
-+#define AT91_CKGR		(AT91RM9200_BASE_CKGR	- AT91_BASE_SYS)
-+#define AT91_ST			(AT91RM9200_BASE_ST	- AT91_BASE_SYS)
-+#define AT91_RTC		(AT91RM9200_BASE_RTC	- AT91_BASE_SYS)
-+#define AT91_MC			(AT91RM9200_BASE_MC	- AT91_BASE_SYS)
-+#define AT91_EBI		(AT91RM9200_BASE_EBI	- AT91_BASE_SYS)
-+#define 	AT91_EBI_CSA		((AT91RM9200_BASE_EBI +0x00)	- AT91_BASE_SYS)
-+#define AT91_SMC2		(AT91RM9200_BASE_SMC2	- AT91_BASE_SYS)
-+#define		AT91_SMC2_CSR0		((AT91RM9200_BASE_SMC2+0x00)	- AT91_BASE_SYS)
-+#define		AT91_SMC2_CSR1		((AT91RM9200_BASE_SMC2+0x04)	- AT91_BASE_SYS)
-+#define		AT91_SMC2_CSR2		((AT91RM9200_BASE_SMC2+0x08)	- AT91_BASE_SYS)
-+#define		AT91_SMC2_CSR3		((AT91RM9200_BASE_SMC2+0x0c)	- AT91_BASE_SYS)
-+#define		AT91_SMC2_CSR4		((AT91RM9200_BASE_SMC2+0x10)	- AT91_BASE_SYS)
-+#define		AT91_SMC2_CSR5		((AT91RM9200_BASE_SMC2+0x14)	- AT91_BASE_SYS)
-+#define		AT91_SMC2_CSR6		((AT91RM9200_BASE_SMC2+0x18)	- AT91_BASE_SYS)
-+#define		AT91_SMC2_CSR7		((AT91RM9200_BASE_SMC2+0x1c)	- AT91_BASE_SYS)
-+
-+
-+#define AT91_USART0		AT91RM9200_BASE_US0
-+#define AT91_USART1		AT91RM9200_BASE_US1
-+#define AT91_USART2		AT91RM9200_BASE_US2
-+#define AT91_USART3		AT91RM9200_BASE_US3
-+
- /*****************************************************************************/
- /*        SOFTWARE API DEFINITION  FOR Timer Counter Channel Interface       */
- /*****************************************************************************/
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/gpio.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/gpio.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/gpio.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/gpio.h	2009-01-01 14:02:11.000000000 +0100
-@@ -0,0 +1,367 @@
-+/*
-+ * [origin: Linux kernel include/asm-arm/arch-at91/gpio.h]
-+ *
-+ *  Copyright (C) 2005 HP Labs
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+
-+#ifndef __ASM_ARCH_AT91_GPIO_H
-+#define __ASM_ARCH_AT91_GPIO_H
-+
-+#include <asm/io.h>
-+#include <asm/errno.h>
-+#include <asm/arch/at91_pio.h>
-+#include <asm/arch/hardware.h>
-+
-+#define PIN_BASE		32
-+
-+#define MAX_GPIO_BANKS		5
-+
-+/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
-+
-+#define	AT91_PIN_PA0	(PIN_BASE + 0x00 + 0)
-+#define	AT91_PIN_PA1	(PIN_BASE + 0x00 + 1)
-+#define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
-+#define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
-+#define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
-+#define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
-+#define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
-+#define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
-+#define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
-+#define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
-+#define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
-+#define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
-+#define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
-+#define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
-+#define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
-+#define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
-+#define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
-+#define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
-+#define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
-+#define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
-+#define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
-+#define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
-+#define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
-+#define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
-+#define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
-+#define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
-+#define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
-+#define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
-+#define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
-+#define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
-+#define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
-+#define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
-+
-+#define	AT91_PIN_PB0	(PIN_BASE + 0x20 + 0)
-+#define	AT91_PIN_PB1	(PIN_BASE + 0x20 + 1)
-+#define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
-+#define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
-+#define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
-+#define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
-+#define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
-+#define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
-+#define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
-+#define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
-+#define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
-+#define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
-+#define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
-+#define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
-+#define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
-+#define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
-+#define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
-+#define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
-+#define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
-+#define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
-+#define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
-+#define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
-+#define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
-+#define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
-+#define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
-+#define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
-+#define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
-+#define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
-+#define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
-+#define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
-+#define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
-+#define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
-+
-+#define	AT91_PIN_PC0	(PIN_BASE + 0x40 + 0)
-+#define	AT91_PIN_PC1	(PIN_BASE + 0x40 + 1)
-+#define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
-+#define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
-+#define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
-+#define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
-+#define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
-+#define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
-+#define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
-+#define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
-+#define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
-+#define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
-+#define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
-+#define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
-+#define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
-+#define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
-+#define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
-+#define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
-+#define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
-+#define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
-+#define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
-+#define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
-+#define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
-+#define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
-+#define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
-+#define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
-+#define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
-+#define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
-+#define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
-+#define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
-+#define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
-+#define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
-+
-+#define	AT91_PIN_PD0	(PIN_BASE + 0x60 + 0)
-+#define	AT91_PIN_PD1	(PIN_BASE + 0x60 + 1)
-+#define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
-+#define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
-+#define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
-+#define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
-+#define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
-+#define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
-+#define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
-+#define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
-+#define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
-+#define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
-+#define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
-+#define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
-+#define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
-+#define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
-+#define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
-+#define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
-+#define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
-+#define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
-+#define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
-+#define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
-+#define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
-+#define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
-+#define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
-+#define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
-+#define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
-+#define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
-+#define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
-+#define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
-+#define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
-+#define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
-+
-+#define	AT91_PIN_PE0	(PIN_BASE + 0x80 + 0)
-+#define	AT91_PIN_PE1	(PIN_BASE + 0x80 + 1)
-+#define	AT91_PIN_PE2	(PIN_BASE + 0x80 + 2)
-+#define	AT91_PIN_PE3	(PIN_BASE + 0x80 + 3)
-+#define	AT91_PIN_PE4	(PIN_BASE + 0x80 + 4)
-+#define	AT91_PIN_PE5	(PIN_BASE + 0x80 + 5)
-+#define	AT91_PIN_PE6	(PIN_BASE + 0x80 + 6)
-+#define	AT91_PIN_PE7	(PIN_BASE + 0x80 + 7)
-+#define	AT91_PIN_PE8	(PIN_BASE + 0x80 + 8)
-+#define	AT91_PIN_PE9	(PIN_BASE + 0x80 + 9)
-+#define	AT91_PIN_PE10	(PIN_BASE + 0x80 + 10)
-+#define	AT91_PIN_PE11	(PIN_BASE + 0x80 + 11)
-+#define	AT91_PIN_PE12	(PIN_BASE + 0x80 + 12)
-+#define	AT91_PIN_PE13	(PIN_BASE + 0x80 + 13)
-+#define	AT91_PIN_PE14	(PIN_BASE + 0x80 + 14)
-+#define	AT91_PIN_PE15	(PIN_BASE + 0x80 + 15)
-+#define	AT91_PIN_PE16	(PIN_BASE + 0x80 + 16)
-+#define	AT91_PIN_PE17	(PIN_BASE + 0x80 + 17)
-+#define	AT91_PIN_PE18	(PIN_BASE + 0x80 + 18)
-+#define	AT91_PIN_PE19	(PIN_BASE + 0x80 + 19)
-+#define	AT91_PIN_PE20	(PIN_BASE + 0x80 + 20)
-+#define	AT91_PIN_PE21	(PIN_BASE + 0x80 + 21)
-+#define	AT91_PIN_PE22	(PIN_BASE + 0x80 + 22)
-+#define	AT91_PIN_PE23	(PIN_BASE + 0x80 + 23)
-+#define	AT91_PIN_PE24	(PIN_BASE + 0x80 + 24)
-+#define	AT91_PIN_PE25	(PIN_BASE + 0x80 + 25)
-+#define	AT91_PIN_PE26	(PIN_BASE + 0x80 + 26)
-+#define	AT91_PIN_PE27	(PIN_BASE + 0x80 + 27)
-+#define	AT91_PIN_PE28	(PIN_BASE + 0x80 + 28)
-+#define	AT91_PIN_PE29	(PIN_BASE + 0x80 + 29)
-+#define	AT91_PIN_PE30	(PIN_BASE + 0x80 + 30)
-+#define	AT91_PIN_PE31	(PIN_BASE + 0x80 + 31)
-+
-+static unsigned long at91_pios[] = {
-+	AT91_PIOA,
-+	AT91_PIOB,
-+	AT91_PIOC,
-+#ifdef AT91_PIOD
-+	AT91_PIOD,
-+#ifdef AT91_PIOE
-+	AT91_PIOE
-+#endif
-+#endif
-+};
-+
-+static inline void *pin_to_controller(unsigned pin)
-+{
-+	pin -= PIN_BASE;
-+	pin /= 32;
-+	return (void *)(AT91_BASE_SYS + at91_pios[pin]);
-+}
-+
-+static inline unsigned pin_to_mask(unsigned pin)
-+{
-+	pin -= PIN_BASE;
-+	return 1 << (pin % 32);
-+}
-+
-+/*
-+ * mux the pin to the "GPIO" peripheral role.
-+ */
-+static inline int at91_set_GPIO_periph(unsigned pin, int use_pullup)
-+{
-+	void		*pio = pin_to_controller(pin);
-+	unsigned	mask = pin_to_mask(pin);
-+
-+	__raw_writel(mask, pio + PIO_IDR);
-+	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
-+	__raw_writel(mask, pio + PIO_PER);
-+	return 0;
-+}
-+
-+/*
-+ * mux the pin to the "A" internal peripheral role.
-+ */
-+static inline int at91_set_A_periph(unsigned pin, int use_pullup)
-+{
-+	void		*pio = pin_to_controller(pin);
-+	unsigned	mask = pin_to_mask(pin);
-+
-+	__raw_writel(mask, pio + PIO_IDR);
-+	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
-+	__raw_writel(mask, pio + PIO_ASR);
-+	__raw_writel(mask, pio + PIO_PDR);
-+	return 0;
-+}
-+
-+/*
-+ * mux the pin to the "B" internal peripheral role.
-+ */
-+static inline int at91_set_B_periph(unsigned pin, int use_pullup)
-+{
-+	void		*pio = pin_to_controller(pin);
-+	unsigned	mask = pin_to_mask(pin);
-+
-+	__raw_writel(mask, pio + PIO_IDR);
-+	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
-+	__raw_writel(mask, pio + PIO_BSR);
-+	__raw_writel(mask, pio + PIO_PDR);
-+	return 0;
-+}
-+
-+/*
-+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
-+ * configure it for an input.
-+ */
-+static inline int at91_set_gpio_input(unsigned pin, int use_pullup)
-+{
-+	void		*pio = pin_to_controller(pin);
-+	unsigned	mask = pin_to_mask(pin);
-+
-+	__raw_writel(mask, pio + PIO_IDR);
-+	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
-+	__raw_writel(mask, pio + PIO_ODR);
-+	__raw_writel(mask, pio + PIO_PER);
-+	return 0;
-+}
-+
-+/*
-+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
-+ * and configure it for an output.
-+ */
-+static inline int at91_set_gpio_output(unsigned pin, int value)
-+{
-+	void		*pio = pin_to_controller(pin);
-+	unsigned	mask = pin_to_mask(pin);
-+
-+	__raw_writel(mask, pio + PIO_IDR);
-+	__raw_writel(mask, pio + PIO_PUDR);
-+	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-+	__raw_writel(mask, pio + PIO_OER);
-+	__raw_writel(mask, pio + PIO_PER);
-+	return 0;
-+}
-+
-+/*
-+ * enable/disable the glitch filter; mostly used with IRQ handling.
-+ */
-+static inline int at91_set_deglitch(unsigned pin, int is_on)
-+{
-+	void		*pio = pin_to_controller(pin);
-+	unsigned	mask = pin_to_mask(pin);
-+
-+	__raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
-+	return 0;
-+}
-+
-+/*
-+ * enable/disable the multi-driver; This is only valid for output and
-+ * allows the output pin to run as an open collector output.
-+ */
-+static inline int at91_set_multi_drive(unsigned pin, int is_on)
-+{
-+	void		*pio = pin_to_controller(pin);
-+	unsigned	mask = pin_to_mask(pin);
-+
-+	__raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
-+	return 0;
-+}
-+
-+static inline int gpio_direction_input(unsigned pin)
-+{
-+	void		*pio = pin_to_controller(pin);
-+	unsigned	mask = pin_to_mask(pin);
-+
-+	if (!(__raw_readl(pio + PIO_PSR) & mask))
-+		return -EINVAL;
-+	__raw_writel(mask, pio + PIO_ODR);
-+	return 0;
-+}
-+
-+static inline int gpio_direction_output(unsigned pin, int value)
-+{
-+	void		*pio = pin_to_controller(pin);
-+	unsigned	mask = pin_to_mask(pin);
-+
-+	if (!(__raw_readl(pio + PIO_PSR) & mask))
-+		return -EINVAL;
-+	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-+	__raw_writel(mask, pio + PIO_OER);
-+	return 0;
-+}
-+
-+/*
-+ * assuming the pin is muxed as a gpio output, set its value.
-+ */
-+static inline int at91_set_gpio_value(unsigned pin, int value)
-+{
-+	void		*pio = pin_to_controller(pin);
-+	unsigned	mask = pin_to_mask(pin);
-+
-+	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-+	return 0;
-+}
-+
-+/*
-+ * read the pin's value (works even if it's not muxed as a gpio).
-+ */
-+static inline int at91_get_gpio_value(unsigned pin)
-+{
-+	void		*pio = pin_to_controller(pin);
-+	unsigned	mask = pin_to_mask(pin);
-+	u32		pdsr;
-+
-+	pdsr = __raw_readl(pio + PIO_PDSR);
-+	return (pdsr & mask) != 0;
-+}
-+
-+#endif
-diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/io.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/io.h
---- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/io.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/io.h	2009-01-01 15:59:51.000000000 +0100
-@@ -0,0 +1,56 @@
-+/*
-+ * [origin: Linux kernel include/asm-arm/arch-at91/io.h]
-+ *
-+ *  Copyright (C) 2003 SAN People
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#ifndef __ASM_ARCH_IO_H
-+#define __ASM_ARCH_IO_H
-+
-+#include <asm/io.h>
-+
-+static inline unsigned int at91_sys_read(unsigned int reg_offset)
-+{
-+	void *addr = (void *)AT91_BASE_SYS;
-+
-+	return __raw_readl(addr + reg_offset);
-+}
-+
-+static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
-+{
-+	void *addr = (void *)AT91_BASE_SYS;
-+
-+	__raw_writel(value, addr + reg_offset);
-+}
-+
-+static inline void at91_sys_setbit(unsigned long value, unsigned int reg_offset)
-+{
-+	void *addr = (void *)(AT91_BASE_SYS  + reg_offset);
-+	value |= __raw_readl(addr);
-+	__raw_writel(value, addr);
-+}
-+
-+static inline void at91_sys_clrbit(unsigned long value, unsigned int reg_offset)
-+{
-+	void *addr = (void *)(AT91_BASE_SYS  + reg_offset);
-+	unsigned long data;
-+	data = __raw_readl(addr);
-+	data &= ~value;
-+	__raw_writel(data, addr);
-+}
-+
-+#endif
-
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-002-at91rm9200dk.h.patch b/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-002-at91rm9200dk.h.patch
deleted file mode 100644
index 2e7e57822..000000000
--- a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-002-at91rm9200dk.h.patch
+++ /dev/null
@@ -1,309 +0,0 @@
-diff -urN u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk_df.h u-boot-2009.01/include/configs/at91rm9200dk_df.h
---- u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk_df.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91rm9200dk_df.h	2009-01-01 21:19:30.000000000 +0100
-@@ -0,0 +1,251 @@
-+/*
-+ * Rick Bronson <rick@efn.org>
-+ *
-+ * Configuration settings for the AT91RM9200DK board.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+#define	AT91RM9200_BOARD	MACH_TYPE_AT91RM9200DK
-+#define	CONFIG_HOSTNAME		at91rm9200dk
-+
-+/* ARM asynchronous clock */
-+#define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
-+#define AT91C_MASTER_CLOCK	59904000	/* peripheral clock (AT91C_MASTER_CLOCK / 3) */
-+/* #define AT91C_MASTER_CLOCK	44928000 */	/* peripheral clock (AT91C_MASTER_CLOCK / 4) */
-+
-+#define AT91_SLOW_CLOCK		32768	/* slow clock */
-+
-+#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
-+#define	CONFIG_AT91		1	/* THis is an ARM from the AT91 family */
-+#define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
-+#define CONFIG_AT91RM9200DK	1	/* on an AT91RM9200DK Board	*/
-+#undef  CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
-+#define USE_920T_MMU		1
-+
-+#define CONFIG_SKIP_LOWLEVEL_INIT	/* Already done by dataflashboot */
-+
-+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_INITRD_TAG	1
-+
-+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_SYS_USE_MAIN_OSCILLATOR		1
-+/* flash */
-+#define MC_PUIA_VAL	0x00000000
-+#define MC_PUP_VAL	0x00000000
-+#define MC_PUER_VAL	0x00000000
-+#define MC_ASR_VAL	0x00000000
-+#define MC_AASR_VAL	0x00000000
-+#define EBI_CFGR_VAL	0x00000000
-+#define SMC_CSR0_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */
-+
-+/* clocks */
-+#define PLLAR_VAL	0x20263E04 /* 179.712000 MHz for PCK */
-+#define PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-+#define MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
-+
-+/* sdram */
-+#define PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-+#define PIOC_BSR_VAL	0x00000000
-+#define PIOC_PDR_VAL	0xFFFF0000
-+#define EBI_CSA_VAL	0x00000002 /* CS1=SDRAM */
-+#define SDRC_CR_VAL	0x2188c155 /* set up the SDRAM */
-+#define SDRAM		0x20000000 /* address of the SDRAM */
-+#define SDRAM1		0x20000080 /* address of the SDRAM */
-+#define SDRAM_VAL	0x00000000 /* value written to SDRAM */
-+#define SDRC_MR_VAL	0x00000002 /* Precharge All */
-+#define SDRC_MR_VAL1	0x00000004 /* refresh */
-+#define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
-+#define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
-+#define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
-+#else
-+#define CONFIG_SKIP_RELOCATE_UBOOT
-+#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
-+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-+
-+#define CONFIG_BAUDRATE 115200
-+
-+/*
-+ * Hardware drivers
-+ */
-+
-+/* define one of these to choose the DBGU, USART0  or USART1 as console */
-+#define CONFIG_DBGU
-+#undef CONFIG_USART0
-+#undef CONFIG_USART1
-+
-+#undef	CONFIG_HWFLOW			/* don't include RTS/CTS flow control support	*/
-+
-+#undef	CONFIG_MODEM_SUPPORT		/* disable modem initialization stuff */
-+
-+#define CONFIG_BOOTDELAY      3
-+/* #define CONFIG_ENV_OVERWRITE	1 */
-+
-+
-+/*
-+ * BOOTP options
-+ */
-+#define CONFIG_BOOTP_BOOTFILESIZE
-+#define CONFIG_BOOTP_BOOTPATH
-+#define CONFIG_BOOTP_GATEWAY
-+#define CONFIG_BOOTP_HOSTNAME
-+
-+
-+/*
-+ * Command line configuration.
-+ */
-+#include <config_cmd_default.h>
-+
-+#define CONFIG_CMD_DHCP
-+#define CONFIG_CMD_MII
-+#define CONFIG_CMD_NAND
-+#define CONFIG_CMD_AT91_SPIMUX
-+
-+#define CONFIG_NAND_LEGACY
-+
-+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
-+#define SECTORSIZE 512
-+
-+#define ADDR_COLUMN 1
-+#define ADDR_PAGE 2
-+#define ADDR_COLUMN_PAGE 3
-+
-+#define NAND_ChipID_UNKNOWN	0x00
-+#define NAND_MAX_FLOORS 1
-+#define NAND_MAX_CHIPS 1
-+
-+#define AT91_SMART_MEDIA_ALE (1 << 22)	/* our ALE is AD22 */
-+#define AT91_SMART_MEDIA_CLE (1 << 21)	/* our CLE is AD21 */
-+
-+#include <asm/arch/AT91RM9200.h>	/* needed for port definitions */
-+#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
-+#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
-+
-+#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2))
-+
-+#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0)
-+#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0)
-+#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
-+#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
-+/* the following are NOP's in our implementation */
-+#define NAND_CTL_CLRALE(nandptr)
-+#define NAND_CTL_SETALE(nandptr)
-+#define NAND_CTL_CLRCLE(nandptr)
-+#define NAND_CTL_SETCLE(nandptr)
-+
-+#define CONFIG_NR_DRAM_BANKS 1
-+#define PHYS_SDRAM 0x20000000
-+#define PHYS_SDRAM_SIZE 0x2000000  /* 32 megs */
-+
-+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
-+#define CONFIG_SYS_MEMTEST_END			CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
-+
-+#define CONFIG_DRIVER_ETHER
-+#define CONFIG_NET_RETRY_COUNT		20
-+#define CONFIG_AT91C_USE_RMII
-+
-+/* AC Characteristics */
-+/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
-+#define DATAFLASH_TCSS	(0xC << 16)
-+#define DATAFLASH_TCHS	(0x1 << 24)
-+
-+#define CONFIG_HAS_DATAFLASH		1
-+#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
-+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
-+#define CONFIG_SYS_MAX_DATAFLASH_PAGES		16384
-+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
-+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* Logical adress for CS3 */
-+#define CONFIG__SUPPORT_BLOCK_ERASE		1
-+
-+
-+#define PHYS_FLASH_1			0x10000000
-+#define PHYS_FLASH_SIZE			0x200000  /* 2 megs main flash */
-+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
-+#define CONFIG_SYS_MAX_FLASH_BANKS		1
-+#define CONFIG_SYS_MAX_FLASH_SECT		256
-+#define CONFIG_SYS_FLASH_ERASE_TOUT		(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-+#define CONFIG_SYS_FLASH_WRITE_TOUT		(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-+
-+#define	CONFIG_ENV_IS_IN_DATAFLASH	1
-+#define	CONFIG_NEW_PARTITION		1
-+
-+#ifdef CONFIG_ENV_IS_IN_DATAFLASH
-+#ifdef	CONFIG_NEW_PARTITION		
-+#define CONFIG_ENV_OFFSET		0x4200
-+#define CONFIG_ENV_ADDR			(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-+#define CONFIG_ENV_SIZE			0x2000  /* 8 * 1056 really , but start.s is not OK with this*/
-+#else
-+#define CONFIG_ENV_OFFSET		0x20000
-+#define CONFIG_ENV_ADDR			(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-+#define CONFIG_ENV_SIZE			0x2000  /* 0x8000 */
-+#endif
-+#else
-+#define CONFIG_ENV_IS_IN_FLASH		1
-+#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0xe000)  /* between boot.bin and u-boot.bin.gz */
-+#define CONFIG_ENV_SIZE			0x2000  /* 0x8000 */
-+#else
-+#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x60000)  /* after u-boot.bin */
-+#define CONFIG_ENV_SIZE			0x10000 /* sectors are 64K here */
-+#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
-+#endif	/* CONFIG_ENV_IS_IN_DATAFLASH */
-+
-+#if defined(CONFIG_AT91RM9200DK)
-+#define	DATAFLASH_MMC_SELECT		AT91_PIN_PB7
-+#else
-+#define	DATAFLASH_MMC_SELECT		AT91_PIN_PB22
-+#endif
-+
-+#define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
-+
-+#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_SYS_BOOT_SIZE		0x6000 /* 24 KBytes */
-+#define CONFIG_SYS_U_BOOT_BASE		(PHYS_FLASH_1 + 0x10000)
-+#define CONFIG_SYS_U_BOOT_SIZE		0x10000 /* 64 KBytes */
-+#else
-+#define CONFIG_SYS_BOOT_SIZE		0x00 /* 0 KBytes */
-+#define CONFIG_SYS_U_BOOT_BASE		PHYS_FLASH_1
-+#define CONFIG_SYS_U_BOOT_SIZE		0x60000 /* 384 KBytes */
-+#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
-+
-+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 19200, 38400, 57600, 9600 }
-+
-+#define CONFIG_SYS_PROMPT		"U-Boot> "	/* Monitor Command Prompt */
-+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
-+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-+
-+#define CONFIG_SYS_HZ 1000
-+#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2	/* AT91C_TC0_CMR is implicitly set to */
-+						/* AT91C_TC_TIMER_DIV1_CLOCK */
-+
-+#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
-+
-+#ifdef CONFIG_USE_IRQ
-+#error CONFIG_USE_IRQ not supported
-+#endif
-+
-+#endif
-diff -urN u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk.h u-boot-2009.01/include/configs/at91rm9200dk.h
---- u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk.h	2009-01-01 13:09:35.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91rm9200dk.h	2009-01-01 17:06:32.000000000 +0100
-@@ -24,6 +24,8 @@
- 
- #ifndef __CONFIG_H
- #define __CONFIG_H
-+#define	AT91RM9200_BOARD	MACH_TYPE_AT91RM9200DK
-+#define	CONFIG_HOSTNAME		at91rm9200dk
- 
- /* ARM asynchronous clock */
- #define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
-@@ -33,6 +35,7 @@
- #define AT91_SLOW_CLOCK		32768	/* slow clock */
- 
- #define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
-+#define	CONFIG_AT91		1	/* THis is an ARM from the AT91 family */
- #define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
- #define CONFIG_AT91RM9200DK	1	/* on an AT91RM9200DK Board	*/
- #undef  CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
-@@ -117,6 +120,7 @@
- #define CONFIG_CMD_DHCP
- #define CONFIG_CMD_MII
- #define CONFIG_CMD_NAND
-+#define CONFIG_CMD_AT91_SPIMUX
- 
- #define CONFIG_NAND_LEGACY
- 
-@@ -198,6 +202,11 @@
- #endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
- #endif	/* CONFIG_ENV_IS_IN_DATAFLASH */
- 
-+#if defined(CONFIG_AT91RM9200DK)
-+#define	DATAFLASH_MMC_SELECT		AT91_PIN_PB7
-+#else
-+#define	DATAFLASH_MMC_SELECT		AT91_PIN_PB22
-+#endif
- 
- #define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
- 
-diff -urN u-boot-2009.01-rc1-0rig//Makefile u-boot-2009.01/Makefile
---- u-boot-2009.01-rc1-0rig//Makefile	2009-01-01 13:09:30.000000000 +0100
-+++ u-boot-2009.01/Makefile	2009-01-01 21:35:24.000000000 +0100
-@@ -2562,6 +2562,9 @@
- ## Atmel AT91RM9200 Systems
- #########################################################################
- 
-+at91rm9200dk_df_config	:	unconfig
-+	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
-+
- at91rm9200dk_config	:	unconfig
- 	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
- 
-
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-003-at91rm9200dk.patch b/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-003-at91rm9200dk.patch
deleted file mode 100644
index 8f14170fa..000000000
--- a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-003-at91rm9200dk.patch
+++ /dev/null
@@ -1,324 +0,0 @@
-diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/at91rm9200dk.c u-boot-2009.01/board/atmel/at91rm9200dk/at91rm9200dk.c
---- u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/at91rm9200dk.c	2009-01-01 13:09:31.000000000 +0100
-+++ u-boot-2009.01/board/atmel/at91rm9200dk/at91rm9200dk.c	2009-01-01 16:11:36.000000000 +0100
-@@ -3,6 +3,9 @@
-  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-  * Marius Groeger <mgroeger@sysgo.de>
-  *
-+ * (C) Copyright 2008
-+ * Ulf Samuelsson <ulf.samuelsson@atmel.com>
-+ *
-  * See file CREDITS for list of people who contributed to this
-  * project.
-  *
-@@ -24,6 +27,10 @@
- 
- #include <common.h>
- #include <asm/arch/AT91RM9200.h>
-+#include <asm/arch/at91_pmc.h>
-+#include <asm/arch/at91_pio.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/io.h>
- #include <at91rm9200_net.h>
- #include <dm9161.h>
- 
-@@ -41,13 +48,13 @@
- 
- 	/* Correct IRDA resistor problem */
- 	/* Set PA23_TXD in Output */
--	((AT91PS_PIO) AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2;
-+	at91_set_gpio_output(AT91_PIN_PA23, 1);
- 
- 	/* memory and cpu-speed are setup before relocation */
- 	/* so we do _nothing_ here */
- 
- 	/* arch number of AT91RM9200DK-Board */
--	gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200DK;
-+	gd->bd->bi_arch_number = AT91RM9200_BOARD;
- 	/* adress of boot parameters */
- 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- 
-@@ -91,46 +98,58 @@
-  */
- #if defined(CONFIG_CMD_NAND)
- extern ulong nand_probe (ulong physadr);
-+/* set the bus interface characteristics based on
-+ * tDS Data Set up Time 30 - ns
-+ * tDH Data Hold Time 20 - ns
-+ * tALS ALE Set up Time 20 - ns
-+ * 16ns at 60 MHz ~= 3
-+ */
- 
--#define AT91_SMARTMEDIA_BASE 0x40000000	/* physical address to access memory on NCS3 */
--void nand_init (void)
--{
--	/* Setup Smart Media, fitst enable the address range of CS3 */
--	*AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia;
--	/* set the bus interface characteristics based on
--	   tDS Data Set up Time 30 - ns
--	   tDH Data Hold Time 20 - ns
--	   tALS ALE Set up Time 20 - ns
--	   16ns at 60 MHz ~= 3  */
- /*memory mapping structures */
- #define SM_ID_RWH	(5 << 28)
- #define SM_RWH		(1 << 28)
- #define SM_RWS		(0 << 24)
- #define SM_TDF		(1 << 8)
- #define SM_NWS		(3)
--	AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS |
--		AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 |
--		SM_TDF | AT91C_SMC2_WSEN | SM_NWS);
-+
-+#define	SMARTMEDIA_INIT	(			\
-+		SM_RWH |			\
-+		SM_RWS |			\
-+		AT91C_SMC2_ACSS_STANDARD |	\
-+		AT91C_SMC2_DBW_8 |		\
-+		SM_TDF |			\
-+		AT91C_SMC2_WSEN |		\
-+		SM_NWS				\
-+		)
-+
-+
-+
-+#define AT91_SMARTMEDIA_BASE 0x40000000	/* physical address to access memory on NCS3 */
-+void nand_init (void)
-+{
-+	/* Setup Smart Media, fitst enable the address range of CS3 */
-+	/* *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia; */
-+	at91_sys_setbit(AT91C_EBI_CS3A_SMC_SmartMedia, AT91_EBI_CSA);
-+
-+	/* Init Smartmedia Interface */
-+	at91_sys_write(AT91_SMC2_CSR3, SMARTMEDIA_INIT);
- 
- 	/* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */
--	*AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
--		AT91C_PC3_BFBAA_SMWE;
--	*AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
--		AT91C_PC3_BFBAA_SMWE;
-+	at91_set_A_periph(AT91_PIN_PC0, 0);	/* BFCK	*/
-+	at91_set_A_periph(AT91_PIN_PC1, 0);	/* BFRDY/SMOE */
-+	at91_set_A_periph(AT91_PIN_PC3, 0);	/* BFBAA/SMWE */
- 
- 	/* Configure PC2 as input (signal READY of the SmartMedia) */
--	*AT91C_PIOC_PER = AT91C_PC2_BFAVD;	/* enable direct output enable */
--	*AT91C_PIOC_ODR = AT91C_PC2_BFAVD;	/* disable output */
-+	at91_set_gpio_input(AT91_PIN_PC2, 0);
- 
- 	/* Configure PB1 as input (signal Card Detect of the SmartMedia) */
--	*AT91C_PIOB_PER = AT91C_PIO_PB1;	/* enable direct output enable */
--	*AT91C_PIOB_ODR = AT91C_PIO_PB1;	/* disable output */
-+	at91_set_gpio_input(AT91_PIN_PB1, 0);
- 
- 	/* PIOB and PIOC clock enabling */
--	*AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
--	*AT91C_PMC_PCER = 1 << AT91C_ID_PIOC;
-+	at91_sys_write(AT91_PMC_PCER, 1 << AT91RM9200_ID_PIOB);
-+	at91_sys_write(AT91_PMC_PCER, 1 << AT91RM9200_ID_PIOC);
- 
--	if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
-+	if (at91_get_gpio_value(AT91_PIN_PB1))
- 		printf ("  No SmartMedia card inserted\n");
- #ifdef DEBUG
- 	printf ("  SmartMedia card inserted\n");
-@@ -140,3 +159,4 @@
- 	printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20);
- }
- #endif
-+
-diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/led.c u-boot-2009.01/board/atmel/at91rm9200dk/led.c
---- u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/led.c	2009-01-01 13:09:31.000000000 +0100
-+++ u-boot-2009.01/board/atmel/at91rm9200dk/led.c	2009-01-01 15:53:56.000000000 +0100
-@@ -24,57 +24,105 @@
- 
- #include <common.h>
- #include <asm/arch/AT91RM9200.h>
-+/*#include <asm/arch/at91_pmc.h>*/
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/io.h>
- 
--#define	GREEN_LED	AT91C_PIO_PB0
--#define	YELLOW_LED	AT91C_PIO_PB1
--#define	RED_LED	AT91C_PIO_PB2
-+#define	GREEN_LED			AT91_PIN_PB0
-+#define	YELLOW_LED			AT91_PIN_PB1
-+#define	RED_LED				AT91_PIN_PB2
- 
--void	green_LED_on(void)
-+
-+#define	GREEN_LED_ON			0
-+#define	GREEN_LED_OFF			1
-+#define	YELLOW_LED_ON			0
-+#define	YELLOW_LED_OFF			1
-+#define	RED_LED_ON			0
-+#define	RED_LED_OFF			1
-+
-+#define	TIME_SLICE			500000
-+
-+void yellow_LED_on(void)
-+{
-+	at91_set_gpio_value(YELLOW_LED, YELLOW_LED_ON);
-+}
-+
-+void yellow_LED_off(void)
-+{
-+	at91_set_gpio_value(YELLOW_LED, YELLOW_LED_OFF);
-+}
-+
-+void red_LED_on(void)
- {
--	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
--	PIOB->PIO_CODR		= GREEN_LED;
-+	at91_set_gpio_value(RED_LED, RED_LED_ON);
- }
- 
--void	 yellow_LED_on(void)
-+void red_LED_off(void)
- {
--	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
--	PIOB->PIO_CODR		= YELLOW_LED;
-+	at91_set_gpio_value(RED_LED, RED_LED_OFF);
- }
- 
--void	 red_LED_on(void)
-+void green_LED_on(void)
- {
--	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
--	PIOB->PIO_CODR		= RED_LED;
-+	at91_set_gpio_value(GREEN_LED, GREEN_LED_ON);
- }
- 
--void	green_LED_off(void)
-+void green_LED_off(void)
- {
--	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
--	PIOB->PIO_SODR		= GREEN_LED;
-+	at91_set_gpio_value(GREEN_LED, GREEN_LED_OFF);
- }
- 
--void	yellow_LED_off(void)
-+static void	delay(unsigned int	time)
- {
--	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
--	PIOB->PIO_SODR		= YELLOW_LED;
-+	volatile unsigned int	counter = time;
-+	while(counter > 0) counter--;
- }
- 
--void	red_LED_off(void)
-+void	green_LED_blink(unsigned int time)
- {
--	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
--	PIOB->PIO_SODR		= RED_LED;
-+	while(time > 0) {
-+		green_LED_on();
-+		delay(TIME_SLICE);
-+		green_LED_off();
-+		delay(TIME_SLICE);
-+		time--;
-+	}
- }
- 
-+void	yellow_LED_blink(unsigned int time)
-+{
-+	while(time > 0) {
-+		yellow_LED_on();
-+		delay(TIME_SLICE);
-+		yellow_LED_off();
-+		delay(TIME_SLICE);
-+		time--;
-+	}
-+}
- 
--void coloured_LED_init (void)
-+void	red_LED_blink(unsigned int time)
- {
--	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
--	AT91PS_PMC	PMC	= AT91C_BASE_PMC;
--	PMC->PMC_PCER		= (1 << AT91C_ID_PIOB);	/* Enable PIOB clock */
--	/* Disable peripherals on LEDs */
--	PIOB->PIO_PER		= AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
--	/* Enable pins as outputs */
--	PIOB->PIO_OER		= AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
--	/* Turn all LEDs OFF */
--	PIOB->PIO_SODR		= AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
-+	while(time > 0) {
-+		red_LED_on();
-+		delay(TIME_SLICE);
-+		red_LED_off();
-+		delay(TIME_SLICE);
-+		time--;
-+	}
- }
-+
-+void coloured_LED_init(void)
-+{
-+	/* Enable clock */
-+	at91_sys_write(AT91C_PMC_PCER, 1 << AT91RM9200_ID_PIOB);
-+
-+	at91_set_gpio_output(GREEN_LED, 1);
-+	at91_set_gpio_output(YELLOW_LED, 1);
-+	at91_set_gpio_output(RED_LED, 1);
-+
-+	at91_set_gpio_value(GREEN_LED,	GREEN_LED_OFF);
-+	at91_set_gpio_value(YELLOW_LED, YELLOW_LED_OFF);
-+	at91_set_gpio_value(RED_LED,	RED_LED_ON);
-+}
-+
-+
-diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/mux.c u-boot-2009.01/board/atmel/at91rm9200dk/mux.c
---- u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/mux.c	2009-01-01 13:09:31.000000000 +0100
-+++ u-boot-2009.01/board/atmel/at91rm9200dk/mux.c	2009-01-01 16:38:01.000000000 +0100
-@@ -1,37 +1,29 @@
- #include <config.h>
- #include <common.h>
- #include <asm/hardware.h>
-+#include <asm/arch/at91_pio.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/io.h>
- #include <dataflash.h>
- 
- int AT91F_GetMuxStatus(void) {
--#ifdef	DATAFLASH_MMC_SELECT
--	AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT; /* Set in PIO mode */
--	AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT; /* Configure in output */
--
--
--	if(AT91C_BASE_PIOB->PIO_ODSR & DATAFLASH_MMC_SELECT) {
--		return 1;
--	} else {
--		return 0;
--	}
--#endif
-+#ifdef	CONFIG_CMD_AT91_SPIMUX
-+	return at91_get_gpio_value(DATAFLASH_MMC_SELECT);
-+#else
- 	return 0;
-+#endif
- }
- 
--void AT91F_SelectMMC(void) {
--#ifdef	DATAFLASH_MMC_SELECT
--	AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT;	/* Set in PIO mode */
--	AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT;	/* Configure in output */
--	/* Set Output */
--	AT91C_BASE_PIOB->PIO_SODR = DATAFLASH_MMC_SELECT;
-+void AT91F_SelectMMC(void) 
-+{
-+#ifdef	CONFIG_CMD_AT91_SPIMUX
-+	at91_set_gpio_output(DATAFLASH_MMC_SELECT, 1);	/* Set in PIO mode and select SD-Card*/
- #endif
- }
- 
- void AT91F_SelectSPI(void) {
--#ifdef	DATAFLASH_MMC_SELECT
--	AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT;	/* Set in PIO mode */
--	AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT;	/* Configure in output */
--	/* Clear Output */
--	AT91C_BASE_PIOB->PIO_CODR = DATAFLASH_MMC_SELECT;
-+#ifdef	CONFIG_CMD_AT91_SPIMUX
-+	at91_set_gpio_output(DATAFLASH_MMC_SELECT, 0);	/* Set in PIO mode and select SPI */
- #endif
- }
-+
-
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-004-at91rm9200ek.patch b/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-004-at91rm9200ek.patch
deleted file mode 100644
index 4d22c5334..000000000
--- a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-004-at91rm9200ek.patch
+++ /dev/null
@@ -1,536 +0,0 @@
-diff -urN u-boot-2009.01-0rig/include/configs/at91rm9200df.h u-boot-2009.01/include/configs/at91rm9200df.h
---- u-boot-2009.01-0rig/include/configs/at91rm9200df.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91rm9200df.h	2009-01-01 21:19:17.000000000 +0100
-@@ -0,0 +1,261 @@
-+/*
-+ * Rick Bronson <rick@efn.org>
-+ *
-+ * Ulf Samuelsson <ulf.samuelsson@atmel.com>
-+ *
-+ * Configuration settings for the AT91RM9200EK board.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+#define	AT91RM9200_BOARD	MACH_TYPE_AT91RM9200DF
-+#define	CONFIG_HOSTNAME		at91rm9200df
-+/* ARM asynchronous clock */
-+#define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
-+#define AT91C_MASTER_CLOCK	59904000	/* peripheral clock (AT91C_MASTER_CLOCK / 3) */
-+/* #define AT91C_MASTER_CLOCK	44928000 */	/* peripheral clock (AT91C_MASTER_CLOCK / 4) */
-+
-+#define AT91_SLOW_CLOCK		32768	/* slow clock */
-+
-+#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
-+#define	CONFIG_AT91		1	/* THis is an ARM from the AT91 family */
-+#define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
-+#define CONFIG_AT91RM9200DF	1	/* Generic AT91RM9200 Board running from Dataflashcard	*/
-+#undef  CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
-+#define USE_920T_MMU		1
-+
-+#define CONFIG_SKIP_LOWLEVEL_INIT	/* Already done by dataflashboot */
-+
-+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_INITRD_TAG	1
-+
-+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_SYS_USE_MAIN_OSCILLATOR		1
-+/* flash */
-+#define MC_PUIA_VAL	0x00000000
-+#define MC_PUP_VAL	0x00000000
-+#define MC_PUER_VAL	0x00000000
-+#define MC_ASR_VAL	0x00000000
-+#define MC_AASR_VAL	0x00000000
-+#define EBI_CFGR_VAL	0x00000000
-+#define SMC_CSR0_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */
-+
-+/* clocks */
-+#define PLLAR_VAL	0x20263E04 /* 179.712000 MHz for PCK */
-+#define PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-+#define MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
-+
-+/* sdram */
-+#define PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-+#define PIOC_BSR_VAL	0x00000000
-+#define PIOC_PDR_VAL	0xFFFF0000
-+#define EBI_CSA_VAL	0x00000002 /* CS1=SDRAM */
-+#define SDRC_CR_VAL	0x2188c155 /* set up the SDRAM */
-+#define SDRAM		0x20000000 /* address of the SDRAM */
-+#define SDRAM1		0x20000080 /* address of the SDRAM */
-+#define SDRAM_VAL	0x00000000 /* value written to SDRAM */
-+#define SDRC_MR_VAL	0x00000002 /* Precharge All */
-+#define SDRC_MR_VAL1	0x00000004 /* refresh */
-+#define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
-+#define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
-+#define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
-+#else
-+#define CONFIG_SKIP_RELOCATE_UBOOT
-+#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
-+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-+
-+#define CONFIG_BAUDRATE 115200
-+
-+/*
-+ * Hardware drivers
-+ */
-+
-+/* define one of these to choose the DBGU, USART0  or USART1 as console */
-+#define CONFIG_DBGU
-+#undef CONFIG_USART0
-+#undef CONFIG_USART1
-+
-+#undef	CONFIG_HWFLOW			/* don't include RTS/CTS flow control support	*/
-+
-+#undef	CONFIG_MODEM_SUPPORT		/* disable modem initialization stuff */
-+
-+#define CONFIG_BOOTDELAY      3
-+/* #define CONFIG_ENV_OVERWRITE	1 */
-+
-+
-+/*
-+ * BOOTP options
-+ */
-+#define CONFIG_BOOTP_BOOTFILESIZE
-+#define CONFIG_BOOTP_BOOTPATH
-+#define CONFIG_BOOTP_GATEWAY
-+#define CONFIG_BOOTP_HOSTNAME
-+
-+
-+/*
-+ * Command line configuration.
-+ */
-+#include <config_cmd_default.h>
-+
-+#define CONFIG_CMD_DHCP
-+#define CONFIG_CMD_MII
-+#define CONFIG_CMD_NAND
-+#define CONFIG_CMD_AT91_SPIMUX
-+#define CONFIG_CMD_ETHINIT
-+
-+#define CONFIG_DOS_PARTITION		1
-+#define CONFIG_MMC			1
-+#define CONFIG_SUPPORT_VFAT		1
-+#define CONFIG__MMC_BASE			0xFFFB4000	/* From AT91RM9200.h*/
-+#define CONFIG__MMC_BLOCKSIZE		512
-+
-+#define CONFIG_NAND_LEGACY
-+
-+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
-+#define SECTORSIZE 512
-+
-+#define ADDR_COLUMN 1
-+#define ADDR_PAGE 2
-+#define ADDR_COLUMN_PAGE 3
-+
-+#define NAND_ChipID_UNKNOWN	0x00
-+#define NAND_MAX_FLOORS 1
-+#define NAND_MAX_CHIPS 1
-+
-+#define AT91_SMART_MEDIA_ALE (1 << 22)	/* our ALE is AD22 */
-+#define AT91_SMART_MEDIA_CLE (1 << 21)	/* our CLE is AD21 */
-+
-+#include <asm/arch/AT91RM9200.h>	/* needed for port definitions */
-+#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
-+#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
-+
-+#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2))
-+
-+#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0)
-+#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0)
-+#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
-+#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
-+/* the following are NOP's in our implementation */
-+#define NAND_CTL_CLRALE(nandptr)
-+#define NAND_CTL_SETALE(nandptr)
-+#define NAND_CTL_CLRCLE(nandptr)
-+#define NAND_CTL_SETCLE(nandptr)
-+
-+#define CONFIG_NR_DRAM_BANKS 1
-+#define PHYS_SDRAM 0x20000000
-+#define PHYS_SDRAM_SIZE 0x2000000  /* 32 megs */
-+
-+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
-+#define CONFIG_SYS_MEMTEST_END			CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
-+
-+#define CONFIG_DRIVER_ETHER
-+#define CONFIG_NET_RETRY_COUNT		20
-+#define CONFIG_AT91C_USE_RMII
-+
-+/* AC Characteristics */
-+/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
-+#define DATAFLASH_TCSS	(0xC << 16)
-+#define DATAFLASH_TCHS	(0x1 << 24)
-+
-+#define CONFIG_HAS_DATAFLASH		1
-+#undef BOARD_LATE_INIT
-+
-+#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
-+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
-+#define CONFIG_SYS_MAX_DATAFLASH_PAGES		16384
-+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
-+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* Logical adress for CS3 */
-+#define CONFIG__SUPPORT_BLOCK_ERASE		1
-+
-+#define PHYS_FLASH_1			0x10000000
-+#define PHYS_FLASH_SIZE			0x800000  /* 2 megs main flash */
-+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
-+#define CONFIG_SYS_MAX_FLASH_BANKS		1
-+#define CONFIG_SYS_MAX_FLASH_SECT		256
-+#define CONFIG_SYS_FLASH_ERASE_TOUT		(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-+#define CONFIG_SYS_FLASH_WRITE_TOUT		(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-+
-+#define	CONFIG_ENV_IS_IN_DATAFLASH
-+#define	CONFIG_NEW_PARTITION		1
-+
-+#ifdef CONFIG_ENV_IS_IN_DATAFLASH
-+#ifdef	CONFIG_NEW_PARTITION		
-+#define CONFIG_ENV_OFFSET		0x21000
-+#define CONFIG_ENV_ADDR			(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-+#define CONFIG_ENV_SIZE			0x2000  /* 8 * 1056 really , but start.s is not OK with this*/
-+#else
-+#define CONFIG_ENV_OFFSET		0x20000
-+#define CONFIG_ENV_ADDR			(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-+#define CONFIG_ENV_SIZE			0x2000  /* 0x8000 */
-+#endif
-+#else
-+#define CONFIG_ENV_IS_IN_FLASH		1
-+#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0xe000)  /* between boot.bin and u-boot.bin.gz */
-+#define CONFIG_ENV_SIZE			0x2000  /* 0x8000 */
-+#else
-+#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x60000)  /* after u-boot.bin */
-+#define CONFIG_ENV_SIZE			0x10000 /* sectors are 64K here */
-+#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
-+#endif	/* CONFIG_ENV_IS_IN_DATAFLASH */
-+
-+#if defined(CONFIG_AT91RM9200DK)
-+#define	DATAFLASH_MMC_SELECT		AT91_PIN_PB7
-+#else
-+#define	DATAFLASH_MMC_SELECT		AT91_PIN_PB22
-+#endif
-+
-+#define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
-+
-+#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_SYS_BOOT_SIZE		0x6000 /* 24 KBytes */
-+#define CONFIG_SYS_U_BOOT_BASE		(PHYS_FLASH_1 + 0x10000)
-+#define CONFIG_SYS_U_BOOT_SIZE		0x10000 /* 64 KBytes */
-+#else
-+#define CONFIG_SYS_BOOT_SIZE		0x00 /* 0 KBytes */
-+#define CONFIG_SYS_U_BOOT_BASE		PHYS_FLASH_1
-+#define CONFIG_SYS_U_BOOT_SIZE		0x60000 /* 384 KBytes */
-+#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
-+
-+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 19200, 38400, 57600, 9600 }
-+
-+#define CONFIG_SYS_PROMPT		"U-Boot> "	/* Monitor Command Prompt */
-+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
-+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-+
-+#define CONFIG_SYS_HZ 1000
-+#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2	/* AT91C_TC0_CMR is implicitly set to */
-+						/* AT91C_TC_TIMER_DIV1_CLOCK */
-+
-+#define CONFIG_STACKSIZE		(32*1024)	/* regular stack */
-+#define CONFIG_STACKSIZE_IRQ  		(4*1024)        /* IRQ stack */
-+#define CONFIG_STACKSIZE_FIQ  		(4*1024) 
-+
-+#ifdef CONFIG_USE_IRQ
-+#error CONFIG_USE_IRQ not supported
-+#endif
-+#endif
-diff -urN u-boot-2009.01-0rig/include/configs/at91rm9200ek.h u-boot-2009.01/include/configs/at91rm9200ek.h
---- u-boot-2009.01-0rig/include/configs/at91rm9200ek.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91rm9200ek.h	2009-01-01 17:13:31.000000000 +0100
-@@ -0,0 +1,251 @@
-+/*
-+ * Rick Bronson <rick@efn.org>
-+ *
-+ * Ulf Samuelsson <ulf.samuelsson@atmel.com>
-+ *
-+ * Configuration settings for the AT91RM9200EK board.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+#define	AT91RM9200_BOARD	MACH_TYPE_AT91RM9200EK
-+#define	CONFIG_HOSTNAME		at91rm9200ek
-+/* ARM asynchronous clock */
-+#define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
-+#define AT91C_MASTER_CLOCK	59904000	/* peripheral clock (AT91C_MASTER_CLOCK / 3) */
-+/* #define AT91C_MASTER_CLOCK	44928000 */	/* peripheral clock (AT91C_MASTER_CLOCK / 4) */
-+
-+#define AT91_SLOW_CLOCK		32768	/* slow clock */
-+
-+#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
-+#define	CONFIG_AT91		1	/* THis is an ARM from the AT91 family */
-+#define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
-+#define CONFIG_AT91RM9200EK	1	/* on an AT91RM9200EK Board	*/
-+#undef  CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
-+#define USE_920T_MMU		1
-+
-+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_INITRD_TAG	1
-+
-+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_SYS_USE_MAIN_OSCILLATOR		1
-+/* flash */
-+#define MC_PUIA_VAL	0x00000000
-+#define MC_PUP_VAL	0x00000000
-+#define MC_PUER_VAL	0x00000000
-+#define MC_ASR_VAL	0x00000000
-+#define MC_AASR_VAL	0x00000000
-+#define EBI_CFGR_VAL	0x00000000
-+#define SMC_CSR0_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */
-+
-+/* clocks */
-+#define PLLAR_VAL	0x20263E04 /* 179.712000 MHz for PCK */
-+#define PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-+#define MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
-+
-+/* sdram */
-+#define PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-+#define PIOC_BSR_VAL	0x00000000
-+#define PIOC_PDR_VAL	0xFFFF0000
-+#define EBI_CSA_VAL	0x00000002 /* CS1=SDRAM */
-+#define SDRC_CR_VAL	0x2188c155 /* set up the SDRAM */
-+#define SDRAM		0x20000000 /* address of the SDRAM */
-+#define SDRAM1		0x20000080 /* address of the SDRAM */
-+#define SDRAM_VAL	0x00000000 /* value written to SDRAM */
-+#define SDRC_MR_VAL	0x00000002 /* Precharge All */
-+#define SDRC_MR_VAL1	0x00000004 /* refresh */
-+#define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
-+#define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
-+#define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
-+#else
-+#define CONFIG_SKIP_RELOCATE_UBOOT
-+#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
-+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-+
-+#define CONFIG_BAUDRATE 115200
-+
-+/*
-+ * Hardware drivers
-+ */
-+
-+/* define one of these to choose the DBGU, USART0  or USART1 as console */
-+#define CONFIG_DBGU
-+#undef CONFIG_USART0
-+#undef CONFIG_USART1
-+
-+#undef	CONFIG_HWFLOW			/* don't include RTS/CTS flow control support	*/
-+
-+#undef	CONFIG_MODEM_SUPPORT		/* disable modem initialization stuff */
-+
-+#define CONFIG_BOOTDELAY      3
-+/* #define CONFIG_ENV_OVERWRITE	1 */
-+
-+
-+/*
-+ * BOOTP options
-+ */
-+#define CONFIG_BOOTP_BOOTFILESIZE
-+#define CONFIG_BOOTP_BOOTPATH
-+#define CONFIG_BOOTP_GATEWAY
-+#define CONFIG_BOOTP_HOSTNAME
-+
-+
-+/*
-+ * Command line configuration.
-+ */
-+#include <config_cmd_default.h>
-+
-+#define CONFIG_CMD_DHCP
-+#define CONFIG_CMD_MII
-+#define CONFIG_CMD_NAND
-+#define CONFIG_CMD_AT91_SPIMUX
-+#define CONFIG_CMD_ETHINIT
-+
-+#define CONFIG_NAND_LEGACY
-+
-+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
-+#define SECTORSIZE 512
-+
-+#define ADDR_COLUMN 1
-+#define ADDR_PAGE 2
-+#define ADDR_COLUMN_PAGE 3
-+
-+#define NAND_ChipID_UNKNOWN	0x00
-+#define NAND_MAX_FLOORS 1
-+#define NAND_MAX_CHIPS 1
-+
-+#define AT91_SMART_MEDIA_ALE (1 << 22)	/* our ALE is AD22 */
-+#define AT91_SMART_MEDIA_CLE (1 << 21)	/* our CLE is AD21 */
-+
-+#include <asm/arch/AT91RM9200.h>	/* needed for port definitions */
-+#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
-+#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
-+
-+#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2))
-+
-+#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0)
-+#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0)
-+#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
-+#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
-+/* the following are NOP's in our implementation */
-+#define NAND_CTL_CLRALE(nandptr)
-+#define NAND_CTL_SETALE(nandptr)
-+#define NAND_CTL_CLRCLE(nandptr)
-+#define NAND_CTL_SETCLE(nandptr)
-+
-+#define CONFIG_NR_DRAM_BANKS 1
-+#define PHYS_SDRAM 0x20000000
-+#define PHYS_SDRAM_SIZE 0x2000000  /* 32 megs */
-+
-+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
-+#define CONFIG_SYS_MEMTEST_END			CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
-+
-+#define CONFIG_DRIVER_ETHER
-+#define CONFIG_NET_RETRY_COUNT		20
-+#define CONFIG_AT91C_USE_RMII
-+
-+/* AC Characteristics */
-+/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
-+#define DATAFLASH_TCSS	(0xC << 16)
-+#define DATAFLASH_TCHS	(0x1 << 24)
-+
-+#define CONFIG_HAS_DATAFLASH		1
-+#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
-+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
-+#define CONFIG_SYS_MAX_DATAFLASH_PAGES		16384
-+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
-+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* Logical adress for CS3 */
-+#define CONFIG__SUPPORT_BLOCK_ERASE		1
-+
-+#define PHYS_FLASH_1			0x10000000
-+#define PHYS_FLASH_SIZE			0x800000  /* 2 megs main flash */
-+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
-+#define CONFIG_SYS_MAX_FLASH_BANKS		1
-+#define CONFIG_SYS_MAX_FLASH_SECT		256
-+#define CONFIG_SYS_FLASH_ERASE_TOUT		(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-+#define CONFIG_SYS_FLASH_WRITE_TOUT		(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-+
-+#undef	CONFIG_ENV_IS_IN_DATAFLASH
-+#define	CONFIG_NEW_PARTITION		1
-+
-+#ifdef CONFIG_ENV_IS_IN_DATAFLASH
-+#ifdef	CONFIG_NEW_PARTITION		
-+#define CONFIG__ENV_OFFSET			0x21000
-+#define CONFIG__ENV_ADDR			(CONFIG_SYS__DATAFLASH_LOGIC_ADDR_CS0 + CONFIG__ENV_OFFSET)
-+#define CONFIG__ENV_SIZE			0x2000  /* 8 * 1056 really , but start.s is not OK with this*/
-+> #else
-+#define CONFIG_ENV_OFFSET		0x20000
-+#define CONFIG_ENV_ADDR			(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-+#define CONFIG_ENV_SIZE			0x2000  /* 0x8000 */
-+#endif
-+#else
-+#define CONFIG_ENV_IS_IN_FLASH		1
-+#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0xe000)  /* between boot.bin and u-boot.bin.gz */
-+#define CONFIG_ENV_SIZE			0x2000  /* 0x8000 */
-+#else
-+#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x60000)  /* after u-boot.bin */
-+#define CONFIG_ENV_SIZE			0x10000 /* sectors are 64K here */
-+#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
-+#endif	/* CONFIG_ENV_IS_IN_DATAFLASH */
-+
-+#if defined(CONFIG_AT91RM9200DK)
-+#define	DATAFLASH_MMC_SELECT		AT91_PIN_PB7
-+#else
-+#define	DATAFLASH_MMC_SELECT		AT91_PIN_PB22
-+#endif
-+
-+#define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
-+
-+#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_SYS_BOOT_SIZE		0x6000 /* 24 KBytes */
-+#define CONFIG_SYS_U_BOOT_BASE		(PHYS_FLASH_1 + 0x10000)
-+#define CONFIG_SYS_U_BOOT_SIZE		0x10000 /* 64 KBytes */
-+#else
-+#define CONFIG_SYS_BOOT_SIZE		0x00 /* 0 KBytes */
-+#define CONFIG_SYS_U_BOOT_BASE		PHYS_FLASH_1
-+#define CONFIG_SYS_U_BOOT_SIZE		0x60000 /* 384 KBytes */
-+#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
-+
-+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 19200, 38400, 57600, 9600 }
-+
-+#define CONFIG_SYS_PROMPT		"U-Boot> "	/* Monitor Command Prompt */
-+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
-+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-+
-+#define CONFIG_SYS_HZ 1000
-+#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2	/* AT91C_TC0_CMR is implicitly set to */
-+						/* AT91C_TC_TIMER_DIV1_CLOCK */
-+
-+#define CONFIG_STACKSIZE		(32*1024)	/* regular stack */
-+#define CONFIG_STACKSIZE_IRQ  		(4*1024)        /* IRQ stack */
-+#define CONFIG_STACKSIZE_FIQ  		(4*1024) 
-+
-+#ifdef CONFIG_USE_IRQ
-+#error CONFIG_USE_IRQ not supported
-+#endif
-+#endif
-diff -urN u-boot-2009.01-0rig/Makefile u-boot-2009.01/Makefile
---- u-boot-2009.01-0rig/Makefile	2009-01-02 10:03:11.000000000 +0100
-+++ u-boot-2009.01/Makefile	2009-01-01 21:31:34.000000000 +0100
-@@ -2568,6 +2568,12 @@
- at91rm9200dk_config	:	unconfig
- 	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
- 
-+at91rm9200df_config	:	unconfig
-+	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
-+
-+at91rm9200ek_config	:	unconfig
-+	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
-+
- cmc_pu2_config	:	unconfig
- 	@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
- 
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-005-at91sam9g20ek.patch b/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-005-at91sam9g20ek.patch
deleted file mode 100644
index b87a655e6..000000000
--- a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-005-at91sam9g20ek.patch
+++ /dev/null
@@ -1,801 +0,0 @@
-diff -urN u-boot-2008.10-0rig/Makefile u-boot-2008.10/Makefile
---- u-boot-2008.10-0rig/Makefile	2008-12-28 14:07:30.000000000 +0100
-+++ u-boot-2008.10/Makefile	2008-12-28 14:06:28.000000000 +0100
-@@ -2541,6 +2541,22 @@
- 	fi;
- 	@$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
- 
-+at91sam9g20ek_nandflash_config \
-+at91sam9g20ek_dataflash_cs0_config \
-+at91sam9g20ek_dataflash_cs1_config \
-+at91sam9g20ek_config	:	unconfig
-+	@if [ "$(findstring _nandflash,$@)" ] ; then \
-+		echo "#define CONFIG_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
-+		$(XECHO) "... with environment variable in NAND FLASH" ; \
-+	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
-+		echo "#define CONFIG_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
-+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
-+	else \
-+		echo "#define CONFIG_USE_DATAFLASH_CS1 1"	>>$(obj)include/config.h ; \
-+		$(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
-+	fi;
-+	@$(MKCONFIG) -a at91sam9g20ek arm arm926ejs at91sam9g20ek atmel at91
-+
- at91sam9261ek_nandflash_config \
- at91sam9261ek_dataflash_cs0_config \
- at91sam9261ek_dataflash_cs3_config \
-Index: include/configs/at91sam9g20ek.h
-===================================================================
---- a/include/configs/at91sam9g20ek.h	(.../u-boot-1.3.4)	(revision 0)
-+++ b/include/configs/at91sam9g20ek.h	(.../u-boot-1.3.4-exp)	(revision 8417)
-@@ -0,0 +1,198 @@
-+/*
-+ * (C) Copyright 2007-2008
-+ * Stelian Pop <stelian.pop@leadtechdesign.com>
-+ * Lead Tech Design <www.leadtechdesign.com>
-+ *
-+ * Configuation settings for the AT91SAM9G20EK board.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+/* ARM asynchronous clock */
-+#define AT91_MAIN_CLOCK		396288000	/* from 18.432 MHz crystal */
-+#define AT91_MASTER_CLOCK	132096000	/* peripheral = main / 3 */
-+#define CONFIG_SYS_HZ			1000000		/* 1us resolution */
-+
-+#define AT91_SLOW_CLOCK		32768	/* slow clock */
-+
-+#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
-+#define CONFIG_AT91SAM9G20	1	/* It's an Atmel AT91SAM9G20 SoC*/
-+#define CONFIG_AT91SAM9G20EK	1	/* on an AT91SAM9G20EK Board	*/
-+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
-+
-+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_INITRD_TAG	1
-+
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_SKIP_RELOCATE_UBOOT
-+
-+/*
-+ * Hardware drivers
-+ */
-+#define CONFIG_ATMEL_USART	1
-+#undef CONFIG_USART0
-+#undef CONFIG_USART1
-+#undef CONFIG_USART2
-+#define CONFIG_USART3		1	/* USART 3 is DBGU */
-+
-+#define CONFIG_BOOTDELAY	3
-+
-+/*
-+ * BOOTP options
-+ */
-+#define CONFIG_BOOTP_BOOTFILESIZE	1
-+#define CONFIG_BOOTP_BOOTPATH		1
-+#define CONFIG_BOOTP_GATEWAY		1
-+#define CONFIG_BOOTP_HOSTNAME		1
-+
-+/*
-+ * Command line configuration.
-+ */
-+#include <config_cmd_default.h>
-+#undef CONFIG_CMD_BDI
-+#undef CONFIG_CMD_IMI
-+#undef CONFIG_CMD_AUTOSCRIPT
-+#undef CONFIG_CMD_FPGA
-+#undef CONFIG_CMD_LOADS
-+#undef CONFIG_CMD_IMLS
-+
-+#define CONFIG_CMD_PING		1
-+#define CONFIG_CMD_DHCP		1
-+#define CONFIG_CMD_NAND
-+#define CONFIG_CMD_USB		1
-+
-+/* SDRAM */
-+#define CONFIG_NR_DRAM_BANKS		1
-+#define PHYS_SDRAM			0x20000000
-+#define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */
-+
-+/* DataFlash */
-+#define CONFIG_HAS_DATAFLASH		1
-+#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
-+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
-+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
-+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1	0xD0000000	/* CS1 */
-+#define AT91_SPI_CLK			15000000
-+#define DATAFLASH_TCSS			(0x22 << 16)
-+#define DATAFLASH_TCHS			(0x1 << 24)
-+#define AT91SAM9260_BASE_SPI0		0xfffc8000
-+/* NAND flash */
-+#define NAND_MAX_CHIPS			1
-+#define CONFIG_SYS_MAX_NAND_DEVICE		1
-+#define CONFIG_SYS_NAND_BASE			0x40000000
-+#define CONFIG_SYS_NAND_DBW_8			1
-+
-+/* NOR flash - no real flash on this board */
-+#define CONFIG_SYS_NO_FLASH			1
-+
-+/* Ethernet */
-+#define CONFIG_MACB			1
-+#define CONFIG_RMII			1
-+#define CONFIG_NET_MULTI		1
-+#define CONFIG_NET_RETRY_COUNT		20
-+#define CONFIG_RESET_PHY_R		1
-+#define AT91SAM9260_BASE_EMAC		0xfffc4000
-+/* USB */
-+#define CONFIG_USB_OHCI_NEW		1
-+#define LITTLEENDIAN			1
-+#define CONFIG_DOS_PARTITION		1
-+#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
-+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9G20_UHP_BASE */
-+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9g20"
-+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-+#define CONFIG_USB_STORAGE		1
-+
-+#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
-+
-+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
-+#define CONFIG_SYS_MEMTEST_END			0x23e00000
-+
-+#ifdef CONFIG_USE_DATAFLASH_CS0
-+
-+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-+#define CONFIG_ENV_IS_IN_DATAFLASH	1
-+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-+#define CONFIG_ENV_OFFSET		0x4200
-+#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-+#define CONFIG_ENV_SIZE		0x4200
-+#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
-+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
-+				"root=/dev/mtdblock0 "			\
-+				"mtdparts=at91_nand:-(root) "		\
-+				"rw rootfstype=jffs2"
-+
-+#elif CONFIG_USE_DATAFLASH_CS1
-+
-+/* bootstrap + u-boot + env + linux in dataflash on CS1 */
-+#define CONFIG_ENV_IS_IN_DATAFLASH	1
-+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
-+#define CONFIG_ENV_OFFSET		0x4200
-+#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
-+#define CONFIG_ENV_SIZE		0x4200
-+#define CONFIG_BOOTCOMMAND	"cp.b 0xD0042000 0x22000000 0x210000; bootm"
-+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
-+				"root=/dev/mtdblock0 "			\
-+				"mtdparts=at91_nand:-(root) "		\
-+				"rw rootfstype=jffs2"
-+
-+#else /* CONFIG_USE_NANDFLASH */
-+
-+/* bootstrap + u-boot + env + linux in nandflash */
-+#define CONFIG_ENV_IS_IN_NAND	1
-+#define CONFIG_ENV_OFFSET		0x60000
-+#define CONFIG_ENV_OFFSET_REDUND	0x80000
-+#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
-+#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
-+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
-+				"root=/dev/mtdblock5 "			\
-+				"mtdparts=at91_nand:128k(bootstrap)ro,"	\
-+				"256k(uboot)ro,128k(env1)ro,"		\
-+				"128k(env2)ro,2M(linux),-(root) "	\
-+				"rw rootfstype=jffs2"
-+
-+#endif
-+
-+#define CONFIG_BAUDRATE		115200
-+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
-+
-+#define CONFIG_SYS_PROMPT		"U-Boot> "
-+#define CONFIG_SYS_CBSIZE		256
-+#define CONFIG_SYS_MAXARGS		16
-+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-+#define CONFIG_SYS_LONGHELP		1
-+#define CONFIG_CMDLINE_EDITING	1
-+
-+#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
-+
-+#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
-+
-+#ifdef CONFIG_USE_IRQ
-+#error CONFIG_USE_IRQ not supported
-+#endif
-+
-+#endif
-Index: board/atmel/at91sam9g20ek/nand.c
-===================================================================
---- a/board/atmel/at91sam9g20ek/nand.c	(.../u-boot-1.3.4)	(revision 0)
-+++ b/board/atmel/at91sam9g20ek/nand.c	(.../u-boot-1.3.4-exp)	(revision 8417)
-@@ -0,0 +1,78 @@
-+/*
-+ * (C) Copyright 2007-2008
-+ * Stelian Pop <stelian.pop@leadtechdesign.com>
-+ * Lead Tech Design <www.leadtechdesign.com>
-+ *
-+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/at91sam9260.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91_pio.h>
-+
-+#include <nand.h>
-+
-+/*
-+ *	hardware specific access to control-lines
-+ */
-+#define	MASK_ALE	(1 << 21)	/* our ALE is AD21 */
-+#define	MASK_CLE	(1 << 22)	/* our CLE is AD22 */
-+
-+static void at91sam9g20ek_nand_hwcontrol(struct mtd_info *mtd,
-+					 int cmd, unsigned int ctrl)
-+{
-+	struct nand_chip *this = mtd->priv;
-+
-+	if (ctrl & NAND_CTRL_CHANGE) {
-+		ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
-+		IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
-+
-+		if (ctrl & NAND_CLE)
-+			IO_ADDR_W |= MASK_CLE;
-+		if (ctrl & NAND_ALE)
-+			IO_ADDR_W |= MASK_ALE;
-+
-+		at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE));
-+		this->IO_ADDR_W = (void *) IO_ADDR_W;
-+	}
-+
-+	if (cmd != NAND_CMD_NONE)
-+		writeb(cmd, this->IO_ADDR_W);
-+}
-+
-+static int at91sam9g20ek_nand_ready(struct mtd_info *mtd)
-+{
-+	return at91_get_gpio_value(AT91_PIN_PC13);
-+}
-+
-+int board_nand_init(struct nand_chip *nand)
-+{
-+	nand->ecc.mode = NAND_ECC_SOFT;
-+#ifdef CONFIG_SYS_NAND_DBW_16
-+	nand->options = NAND_BUSWIDTH_16;
-+#endif
-+	nand->cmd_ctrl = at91sam9g20ek_nand_hwcontrol;
-+	nand->dev_ready = at91sam9g20ek_nand_ready;
-+	nand->chip_delay = 20;
-+
-+	return 0;
-+}
-Index: board/atmel/at91sam9g20ek/at91sam9g20ek.c
-===================================================================
---- a/board/atmel/at91sam9g20ek/at91sam9g20ek.c	(.../u-boot-1.3.4)	(revision 0)
-+++ b/board/atmel/at91sam9g20ek/at91sam9g20ek.c	(.../u-boot-1.3.4-exp)	(revision 8417)
-@@ -0,0 +1,250 @@
-+/*
-+ * (C) Copyright 2007-2008
-+ * Stelian Pop <stelian.pop@leadtechdesign.com>
-+ * Lead Tech Design <www.leadtechdesign.com>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/at91sam9260.h>
-+#include <asm/arch/at91sam9260_matrix.h>
-+#include <asm/arch/at91sam9_smc.h>
-+#include <asm/arch/at91_pmc.h>
-+#include <asm/arch/at91_rstc.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/io.h>
-+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-+#include <net.h>
-+#endif
-+#include <netdev.h>
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+/* ------------------------------------------------------------------------- */
-+/*
-+ * Miscelaneous platform dependent initialisations
-+ */
-+
-+static void at91sam9g20ek_serial_hw_init(void)
-+{
-+#ifdef CONFIG_USART0
-+	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD0 */
-+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD0 */
-+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
-+#endif
-+
-+#ifdef CONFIG_USART1
-+	at91_set_A_periph(AT91_PIN_PB6, 1);		/* TXD1 */
-+	at91_set_A_periph(AT91_PIN_PB7, 0);		/* RXD1 */
-+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
-+#endif
-+
-+#ifdef CONFIG_USART2
-+	at91_set_A_periph(AT91_PIN_PB8, 1);		/* TXD2 */
-+	at91_set_A_periph(AT91_PIN_PB9, 0);		/* RXD2 */
-+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
-+#endif
-+
-+#ifdef CONFIG_USART3	/* DBGU */
-+	at91_set_A_periph(AT91_PIN_PB14, 0);		/* DRXD */
-+	at91_set_A_periph(AT91_PIN_PB15, 1);		/* DTXD */
-+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
-+#endif
-+}
-+
-+#ifdef CONFIG_CMD_NAND
-+static void at91sam9g20ek_nand_hw_init(void)
-+{
-+	unsigned long csa;
-+
-+	/* Enable CS3 */
-+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-+	at91_sys_write(AT91_MATRIX_EBICSA,
-+		       csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-+
-+	/* Configure SMC CS3 for NAND/SmartMedia */
-+	at91_sys_write(AT91_SMC_SETUP(3),
-+		       AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
-+		       AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
-+	at91_sys_write(AT91_SMC_PULSE(3),
-+		       AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) |
-+		       AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(3));
-+	at91_sys_write(AT91_SMC_CYCLE(3),
-+		       AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
-+	at91_sys_write(AT91_SMC_MODE(3),
-+		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
-+		       AT91_SMC_EXNWMODE_DISABLE |
-+#ifdef CONFIG_SYS_NAND_DBW_16
-+		       AT91_SMC_DBW_16 |
-+#else /* CONFIG_SYS_NAND_DBW_8 */
-+		       AT91_SMC_DBW_8 |
-+#endif
-+		       AT91_SMC_TDF_(3));
-+
-+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
-+
-+	/* Configure RDY/BSY */
-+	at91_set_gpio_input(AT91_PIN_PC13, 1);
-+
-+	/* Enable NandFlash */
-+	at91_set_gpio_output(AT91_PIN_PC14, 1);
-+}
-+#endif
-+
-+#ifdef CONFIG_HAS_DATAFLASH
-+static void at91sam9g20ek_spi_hw_init(void)
-+{
-+	at91_set_A_periph(AT91_PIN_PA3, 0);	/* SPI0_NPCS0 */
-+	at91_set_B_periph(AT91_PIN_PC11, 0);	/* SPI0_NPCS1 */
-+
-+	at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
-+	at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
-+	at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
-+
-+	/* Enable clock */
-+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0);
-+}
-+#endif
-+
-+#ifdef CONFIG_MACB
-+static void at91sam9g20ek_macb_hw_init(void)
-+{
-+	/* Enable clock */
-+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
-+
-+	/*
-+	 * Disable pull-up on:
-+	 *	RXDV (PA17) => PHY normal mode (not Test mode)
-+	 *	ERX0 (PA14) => PHY ADDR0
-+	 *	ERX1 (PA15) => PHY ADDR1
-+	 *	ERX2 (PA25) => PHY ADDR2
-+	 *	ERX3 (PA26) => PHY ADDR3
-+	 *	ECRS (PA28) => PHY ADDR4  => PHYADDR = 0x0
-+	 *
-+	 * PHY has internal pull-down
-+	 */
-+	writel(pin_to_mask(AT91_PIN_PA14) |
-+	       pin_to_mask(AT91_PIN_PA15) |
-+	       pin_to_mask(AT91_PIN_PA17) |
-+	       pin_to_mask(AT91_PIN_PA25) |
-+	       pin_to_mask(AT91_PIN_PA26) |
-+	       pin_to_mask(AT91_PIN_PA28),
-+	       pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
-+
-+	/* Need to reset PHY -> 500ms reset */
-+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
-+				     (AT91_RSTC_ERSTL & (0x0D << 8)) |
-+				     AT91_RSTC_URSTEN);
-+
-+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
-+
-+	/* Wait for end hardware reset */
-+	while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
-+
-+	/* Restore NRST value */
-+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
-+				     (AT91_RSTC_ERSTL & (0x0 << 8)) |
-+				     AT91_RSTC_URSTEN);
-+
-+	/* Re-enable pull-up */
-+	writel(pin_to_mask(AT91_PIN_PA14) |
-+	       pin_to_mask(AT91_PIN_PA15) |
-+	       pin_to_mask(AT91_PIN_PA17) |
-+	       pin_to_mask(AT91_PIN_PA25) |
-+	       pin_to_mask(AT91_PIN_PA26) |
-+	       pin_to_mask(AT91_PIN_PA28),
-+	       pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
-+
-+	at91_set_A_periph(AT91_PIN_PA19, 0);	/* ETXCK_EREFCK */
-+	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ERXDV */
-+	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ERX0 */
-+	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERX1 */
-+	at91_set_A_periph(AT91_PIN_PA18, 0);	/* ERXER */
-+	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ETXEN */
-+	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ETX0 */
-+	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ETX1 */
-+	at91_set_A_periph(AT91_PIN_PA21, 0);	/* EMDIO */
-+	at91_set_A_periph(AT91_PIN_PA20, 0);	/* EMDC */
-+
-+#ifndef CONFIG_RMII
-+	at91_set_B_periph(AT91_PIN_PA28, 0);	/* ECRS */
-+	at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECOL */
-+	at91_set_B_periph(AT91_PIN_PA25, 0);	/* ERX2 */
-+	at91_set_B_periph(AT91_PIN_PA26, 0);	/* ERX3 */
-+	at91_set_B_periph(AT91_PIN_PA27, 0);	/* ERXCK */
-+#if defined(CONFIG_AT91SAM9G20EK)
-+	/*
-+	 * use PA10, PA11 for ETX2, ETX3.
-+	 * PA23 and PA24 are for TWI EEPROM
-+	 */
-+	at91_set_B_periph(AT91_PIN_PA10, 0);    /* ETX2 */
-+	at91_set_B_periph(AT91_PIN_PA11, 0);    /* ETX3 */
-+#else
-+	at91_set_B_periph(AT91_PIN_PA23, 0);    /* ETX2 */
-+	at91_set_B_periph(AT91_PIN_PA24, 0);    /* ETX3 */
-+#endif
-+	at91_set_B_periph(AT91_PIN_PA22, 0);	/* ETXER */
-+#endif
-+
-+}
-+#endif
-+
-+int board_init(void)
-+{
-+	/* Enable Ctrlc */
-+	console_init_f();
-+
-+	/* arch number of AT91SAM9G20EK-Board */
-+	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK;
-+	/* adress of boot parameters */
-+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-+
-+	at91sam9g20ek_serial_hw_init();
-+#ifdef CONFIG_CMD_NAND
-+	at91sam9g20ek_nand_hw_init();
-+#endif
-+#ifdef CONFIG_HAS_DATAFLASH
-+	at91sam9g20ek_spi_hw_init();
-+#endif
-+#ifdef CONFIG_MACB
-+	at91sam9g20ek_macb_hw_init();
-+#endif
-+
-+	return 0;
-+}
-+
-+int dram_init(void)
-+{
-+	gd->bd->bi_dram[0].start = PHYS_SDRAM;
-+	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
-+	return 0;
-+}
-+
-+#ifdef CONFIG_RESET_PHY_R
-+void reset_phy(void)
-+{
-+#ifdef CONFIG_MACB
-+	/*
-+	 * Initialize ethernet HW addr prior to starting Linux,
-+	 * needed for nfsroot
-+	 */
-+	eth_init(gd->bd);
-+#endif
-+}
-+#endif
-Index: board/atmel/at91sam9g20ek/led.c
-===================================================================
---- a/board/atmel/at91sam9g20ek/led.c	(.../u-boot-1.3.4)	(revision 0)
-+++ b/board/atmel/at91sam9g20ek/led.c	(.../u-boot-1.3.4-exp)	(revision 8417)
-@@ -0,0 +1,64 @@
-+/*
-+ * (C) Copyright 2007-2008
-+ * Stelian Pop <stelian.pop@leadtechdesign.com>
-+ * Lead Tech Design <www.leadtechdesign.com>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/at91sam9260.h>
-+#include <asm/arch/at91_pmc.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/io.h>
-+
-+#define	RED_LED		AT91_PIN_PA9	/* this is the power led */
-+#define	GREEN_LED	AT91_PIN_PA6	/* this is the user led */
-+
-+void red_LED_on(void)
-+{
-+	at91_set_gpio_value(RED_LED, 1);
-+}
-+
-+void red_LED_off(void)
-+{
-+	at91_set_gpio_value(RED_LED, 0);
-+}
-+
-+void green_LED_on(void)
-+{
-+	at91_set_gpio_value(GREEN_LED, 0);
-+}
-+
-+void green_LED_off(void)
-+{
-+	at91_set_gpio_value(GREEN_LED, 1);
-+}
-+
-+void coloured_LED_init(void)
-+{
-+	/* Enable clock */
-+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA);
-+
-+	at91_set_gpio_output(RED_LED, 1);
-+	at91_set_gpio_output(GREEN_LED, 1);
-+
-+	at91_set_gpio_value(RED_LED, 0);
-+	at91_set_gpio_value(GREEN_LED, 1);
-+}
-Index: board/atmel/at91sam9g20ek/partition.c
-===================================================================
---- a/board/atmel/at91sam9g20ek/partition.c	(.../u-boot-1.3.4)	(revision 0)
-+++ b/board/atmel/at91sam9g20ek/partition.c	(.../u-boot-1.3.4-exp)	(revision 8417)
-@@ -0,0 +1,40 @@
-+/*
-+ * (C) Copyright 2008
-+ * Ulf Samuelsson <ulf@atmel.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ *
-+ */
-+#include <common.h>
-+#include <config.h>
-+#include <asm/hardware.h>
-+#include <dataflash.h>
-+
-+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-+
-+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
-+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
-+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1}
-+};
-+
-+/*define the area offsets*/
-+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
-+	{0x00000000, 0x000041FF, FLAG_PROTECT_SET,   0, "Bootstrap"},
-+	{0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
-+	{0x00008400, 0x00041FFF, FLAG_PROTECT_SET,   0, "U-Boot"},
-+	{0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0,	"Kernel"},
-+	{0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0,	"FS"},
-+};
-Index: board/atmel/at91sam9g20ek/config.mk
-===================================================================
---- a/board/atmel/at91sam9g20ek/config.mk	(.../u-boot-1.3.4)	(revision 0)
-+++ b/board/atmel/at91sam9g20ek/config.mk	(.../u-boot-1.3.4-exp)	(revision 8417)
-@@ -0,0 +1 @@
-+TEXT_BASE = 0x23f00000
-Index: board/atmel/at91sam9g20ek/Makefile
-===================================================================
---- a/board/atmel/at91sam9g20ek/Makefile	(.../u-boot-1.3.4)	(revision 0)
-+++ b/board/atmel/at91sam9g20ek/Makefile	(.../u-boot-1.3.4-exp)	(revision 8417)
-@@ -0,0 +1,57 @@
-+#
-+# (C) Copyright 2003-2008
-+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+#
-+# (C) Copyright 2008
-+# Stelian Pop <stelian.pop@leadtechdesign.com>
-+# Lead Tech Design <www.leadtechdesign.com>
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB	= $(obj)lib$(BOARD).a
-+
-+COBJS-y	+= at91sam9g20ek.o
-+COBJS-y	+= led.o
-+COBJS-y	+= partition.o
-+COBJS-$(CONFIG_CMD_NAND) += nand.o
-+
-+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-+OBJS	:= $(addprefix $(obj),$(COBJS-y))
-+SOBJS	:= $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-+
-+clean:
-+	rm -f $(SOBJS) $(OBJS)
-+
-+distclean:	clean
-+	rm -f $(LIB) core *.bak $(obj).depend
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
-Index: include/asm-arm/arch-at91/hardware.h
-===================================================================
---- a/include/asm-arm/arch-at91/hardware.h	(.../u-boot-1.3.4)	(revision 8417)
-+++ b/include/asm-arm/arch-at91/hardware.h	(.../u-boot-1.3.4-exp)	(revision 8417)
-@@ -18,7 +18,7 @@
- 
- #if defined(CONFIG_AT91RM9200)
- #include <asm/arch/at91rm9200.h>
--#elif defined(CONFIG_AT91SAM9260)
-+#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20)
- #include <asm/arch/at91sam9260.h>
- #define AT91_BASE_EMAC	AT91SAM9260_BASE_EMAC
- #define AT91_BASE_SPI	AT91SAM9260_BASE_SPI0
-diff -urN u-boot-2008.10-0rig/include/asm-arm/mach-types.h u-boot-2008.10/include/asm-arm/mach-types.h
---- u-boot-2008.10-0rig/include/asm-arm/mach-types.h	2008-10-18 21:30:31.000000000 +0200
-+++ u-boot-2008.10/include/asm-arm/mach-types.h	2008-12-28 23:40:55.000000000 +0100
-@@ -23998,6 +23998,18 @@
- # define machine_is_geneva()	(0)
- #endif
- 
-+#ifdef CONFIG_MACH_AT91SAM9G20EK
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type __machine_arch_type
-+# else
-+#  define machine_arch_type MACH_TYPE_AT91SAM9G20EK
-+# endif
-+# define machine_is_at91sam9g20ek() (machine_arch_type == MACH_TYPE_AT91SAM9G20EK)
-+#else
-+# define machine_is_at91sam9g20ek() (0)
-+#endif
-+
- /*
-  * These have not yet been registered
-  */
-diff -urN u-boot-2008.10-0rig/board/atmel/at91sam9g20ek/at91sam9g20ek.c u-boot-2008.10/board/atmel/at91sam9g20ek/at91sam9g20ek.c
---- u-boot-2008.10-0rig/board/atmel/at91sam9g20ek/at91sam9g20ek.c	2008-12-28 14:09:52.000000000 +0100
-+++ u-boot-2008.10/board/atmel/at91sam9g20ek/at91sam9g20ek.c	2008-12-28 23:56:09.000000000 +0100
-@@ -248,3 +248,13 @@
- #endif
- }
- #endif
-+
-+int board_eth_init(bd_t *bis)
-+{
-+	int rc = 0;
-+#ifdef CONFIG_MACB
-+	rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00);
-+#endif
-+	return rc;
-+}
-+
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-006-drivers-net-macb.c.patch b/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-006-drivers-net-macb.c.patch
deleted file mode 100644
index 81ab7c6e6..000000000
--- a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-006-drivers-net-macb.c.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-diff -urN u-boot-2008.10-0rig/drivers/net/macb.c u-boot-2008.10/drivers/net/macb.c
---- u-boot-2008.10-0rig/drivers/net/macb.c	2008-10-18 21:30:31.000000000 +0200
-+++ u-boot-2008.10/drivers/net/macb.c	2008-12-28 23:44:11.000000000 +0100
-@@ -415,18 +415,16 @@
- 
- 	/* choose RMII or MII mode. This depends on the board */
- #ifdef CONFIG_RMII
--#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
--    defined(CONFIG_AT91SAM9263)
--	macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
--#else
-+#if defined(CONFIG_AVR32)
- 	macb_writel(macb, USRIO, 0);
--#endif
- #else
--#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
--    defined(CONFIG_AT91SAM9263)
--	macb_writel(macb, USRIO, MACB_BIT(CLKEN));
-+	macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
-+#endif
- #else
-+#if defined(CONFIG_AVR32)
- 	macb_writel(macb, USRIO, MACB_BIT(MII));
-+#else
-+	macb_writel(macb, USRIO, MACB_BIT(CLKEN));
- #endif
- #endif /* CONFIG_RMII */
- 
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-007-tools.patch b/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-007-tools.patch
deleted file mode 100644
index 8f71ee043..000000000
--- a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-007-tools.patch
+++ /dev/null
@@ -1,576 +0,0 @@
-diff -urN u-boot-2008.10-0rig//tools/Makefile u-boot-2008.10/tools/Makefile
---- u-boot-2008.10-0rig//tools/Makefile	2008-12-31 17:51:29.000000000 +0100
-+++ u-boot-2008.10/tools/Makefile	2008-12-31 19:38:15.000000000 +0100
-@@ -37,6 +37,11 @@
- #OBJ_FILES	+= mpc86x_clk.o
- #endif
- 
-+ifeq ($(VENDOR),atmel)
-+BINS+= raw-at91$(SFX) sx-at91$(SFX)
-+OBJS+= raw-at91.o sx-at91.o
-+endif
-+
- LIBFDT_OBJ_FILES	= $(obj)fdt.o $(obj)fdt_ro.o $(obj)fdt_rw.o $(obj)fdt_strerror.o $(obj)fdt_wip.o
- 
- LOGO_H	= $(OBJTREE)/include/bmp_logo.h
-@@ -175,6 +180,14 @@
- 		$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
- 		$(STRIP) $@
- 
-+$(obj)raw-at91$(SFX):	$(obj)raw-at91.o
-+		$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
-+		$(STRIP) $@
-+
-+$(obj)sx-at91$(SFX):	$(obj)sx-at91.o
-+		$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
-+		$(STRIP) $@
-+
- $(obj)envcrc.o:	$(src)envcrc.c
- 		$(CC) -g $(CFLAGS) -c -o $@ $<
- 
-@@ -223,6 +236,12 @@
- $(obj)fdt_wip.o:	$(obj)fdt_wip.c
- 		$(CC) -g $(FIT_CFLAGS) -c -o $@ $<
- 
-+$(obj)sx-at91.o:		$(src)sx-at91.c
-+		$(CC) -g $(CFLAGS) -c -o $@ $<
-+
-+$(obj)raw-at91.o:	$(src)raw-at91.c
-+		$(CC) -g $(CFLAGS) -c -o $@ $<
-+
- subdirs:
- ifeq ($(TOOLSUBDIRS),)
- 		@:
-diff -urN u-boot-2008.10-0rig//tools/raw-at91.c u-boot-2008.10/tools/raw-at91.c
---- u-boot-2008.10-0rig//tools/raw-at91.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2008.10/tools/raw-at91.c	2008-12-31 19:26:23.000000000 +0100
-@@ -0,0 +1,225 @@
-+/*
-+ * xmodem-at91.c
-+ *
-+ * A simple program using xmodem/1kxmode upload file to at91rm9200 based board.
-+ * Created by (C) Copyright 2004
-+ * Linhang.Zhang, Jilin University of PR.China, linxing@jlu.edu.cn.
-+ *
-+ *************************************************************************************
-+ *
-+ * Modified 01-Feb-2005 (C)Copyright 2005
-+ * Marco Cavallini, www.KoanSoftware.com - ITALY, m.cavallini@koansoftware.com
-+ * - edited indentations and changed break usage in switch statement.
-+ * - added "\r" to printf
-+ *
-+ * - build with 
-+ *   gcc sx-at91.c -o sx-at91
-+ *
-+ * - Howto use this program with minicom/xminicom and AT91 
-+ *   start minicom or xminicom
-+ *   edit Options / File transfer protocol, 
-+ *   add a name (for example J) like the following example
-+ *
-+ *   |     Name             Program                 Name U/D FullScr IO-Red. Multi  |
-+ *   | A  zmodem     /usr/bin/sz -vv -b              Y    U    N       Y       Y    |
-+ *   | B  ymodem     /usr/bin/sb -vv                 Y    U    N       Y       Y    |
-+ *   | C  xmodem     /usr/bin/sx -vv                 Y    U    N       Y       N    |
-+ *   | D  zmodem     /usr/bin/rz -vv -b -E           N    D    N       Y       Y    |
-+ *   | E  ymodem     /usr/bin/rb -vv                 N    D    N       Y       Y    |
-+ *   | F  xmodem     /usr/bin/rx -vv                 Y    D    N       Y       N    |
-+ *   | G  kermit     /usr/bin/kermit -i -l %l -s     Y    U    Y       N       N    |
-+ *   | H  kermit     /usr/bin/kermit -i -l %l -r     N    D    Y       N       N    |
-+ *   | I  ascii      /usr/bin/ascii-xfr -dsv         Y    U    N       Y       N    |
-+ *   | J  at91       /home/koan/xmodem/xs-at91       Y    U    Y       N       N    |
-+ *   | K    -                                                                       |
-+ *   | L    -                                                                       |
-+ *
-+ *   save and use it selecting at91 protocol when you start an Xmodem upload to AT91
-+ *
-+ *************************************************************************************
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include     <stdio.h>
-+#include     <stdlib.h>
-+#include     <string.h>
-+#include     <unistd.h>
-+#include     <sys/types.h>
-+#include     <sys/stat.h>
-+#include     <fcntl.h>
-+#include     <termios.h>
-+#include     <errno.h>
-+#include     <time.h>
-+
-+#define	TRUE		1
-+#define	FALSE		0
-+#define LINESIZE	1024
-+
-+/*********/
-+
-+#define SERIAL_DEVICE "/dev/ttyS0"
-+#define MYBAUDRATE B115200
-+
-+/***************SUB PROGRAM*******/
-+
-+int Initial_SerialPort(void)
-+{
-+	int fd;
-+	struct termios options;
-+
-+	fd = open( SERIAL_DEVICE , O_RDWR | O_NOCTTY | O_NDELAY );
-+	if ( fd == -1 )
-+	{ 
-+		/*open error!*/
-+		perror("Can't open serial port!");
-+		return -1;
-+	}
-+
-+	/*Get the current options for the port...*/
-+	tcgetattr(fd, &options);
-+
-+	/*Set the baud rates to BAUDRATE...*/
-+	cfsetispeed(&options,MYBAUDRATE);
-+	cfsetospeed(&options,MYBAUDRATE);
-+	tcsetattr(fd, TCSANOW, &options);
-+	if (0 != tcgetattr(fd, &options)) 
-+	{
-+		perror("SetupSerial 1");
-+		return -1;
-+	} 
-+	
-+	/*
-+	 * 8bit Data,no partity,1 stop bit...
-+	 */
-+	options.c_cflag &= ~PARENB;
-+	options.c_cflag &= ~CSTOPB;
-+	options.c_cflag &= ~CSIZE;
-+	options.c_cflag |= CS8;
-+	tcflush(fd,TCIFLUSH);
-+
-+	/***Choosing Raw Input*/
-+	options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
-+	options.c_oflag &= ~OPOST; 
-+
-+	/*
-+	 * Set the new options for the port...
-+	 */
-+	if (0 != tcsetattr(fd, TCSANOW, &options))
-+	{
-+ 		perror("SetupSerial error");
-+ 		return -1 ;
-+	}
-+
-+	return fd ;
-+}
-+
-+/******************************/
-+void ClearReceiveBuffer(int fd)
-+{
-+	unsigned char tmp;
-+	while ((read(fd,&tmp,1))>0);
-+	
-+	return;
-+}
-+unsigned char filebuf[ LINESIZE+2 ];
-+unsigned char outbuf[ LINESIZE+2 ];
-+FILE *datafile;
-+int fd;
-+
-+static	unsigned int	ChCnt=0;
-+static	unsigned int	ChIx;
-+unsigned char	GetChar(unsigned char *ch)
-+/* 
-+ * SUCCESS:	Return TRUE
-+ * FAILURE:	Return FALSE
-+ */
-+{
-+  
-+  if(ChCnt == 0) {
-+    ChCnt = fread( filebuf, sizeof(char), LINESIZE, datafile);
-+    ChIx = 0;
-+  }
-+  if(ChCnt > 0) {
-+    *ch = filebuf[ChIx++];
-+    ChCnt--;
-+    return TRUE;
-+  } else {
-+    return FALSE;	/* Reached End of File */
-+  }
-+}
-+
-+/********************************/
-+void	delay()
-+{
-+}
-+
-+int main(int argc,char *argv[])
-+{
-+	char *data_file_name;
-+	int	len;
-+	unsigned char c;
-+	int complete,i,sts;
-+
-+	printf("raw-at91 started...\r\n");
-+	
-+	/* open serial port1 */
-+	if ( (fd = Initial_SerialPort()) == -1)  
-+		return -1 ;
-+
-+	data_file_name = argv[1];
-+
-+	if((datafile=fopen(data_file_name,"rb"))==NULL)
-+	{
-+		perror ("Can't open file!");
-+		return -1 ;
-+	}
-+
-+	/*******************************/
-+	
-+	complete = 0;
-+	/*	ClearReceiveBuffer(fd); */
-+
-+	/* while((read(fd,&ack_id,1))<=0);*/
-+	
-+	/* printf("%c\r\n",ack_id); */
-+	while(!complete)
-+	{
-+	  for(i=0;i < LINESIZE; i++) {		/* A line more than 1024 characters will have problems...*/
-+	    if((sts = GetChar(&outbuf[i]))) {
-+	      /* Sts = Success */
-+	      if((c = outbuf[i]) == '\n') {	/* Found end of Line - Start Processing*/
-+		outbuf[i+1] = '\0';		/* Terminate String*/
-+		break;
-+	      }
-+	    } else {
-+	      /* Sts = Failure - End of File */
-+	      outbuf[i] = '\n';
-+	      outbuf[i+1] = '\0';
-+	      complete = 1;
-+	    }
-+	  }
-+	  printf("%s",outbuf);		/* Inform user */
-+	  len = strlen((char *)outbuf);
-+	  write(fd,outbuf,strlen((char *)outbuf));
-+	  for(i = 0; i < 500000000; i++ ) delay();
-+	  while((read(fd,&c,1))<=0) putchar(c);
-+	  printf("  ");
-+	}
-+	fclose(datafile);
-+	close(fd);
-+	return 0;
-+}
-diff -urN u-boot-2008.10-0rig//tools/sx-at91.c u-boot-2008.10/tools/sx-at91.c
---- u-boot-2008.10-0rig//tools/sx-at91.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2008.10/tools/sx-at91.c	2008-12-31 19:26:23.000000000 +0100
-@@ -0,0 +1,300 @@
-+/*
-+ * xmodem-at91.c
-+ *
-+ * A simple program using xmodem/1kxmode upload file to at91rm9200 based board.
-+ * Created by (C) Copyright 2004
-+ * Linhang.Zhang, Jilin University of PR.China, linxing@jlu.edu.cn.
-+ *
-+ *************************************************************************************
-+ *
-+ * Modified 01-Feb-2005 (C)Copyright 2005
-+ * Marco Cavallini, www.KoanSoftware.com - ITALY, m.cavallini@koansoftware.com
-+ * - edited indentations and changed break usage in switch statement.
-+ * - added "\r" to printf
-+ *
-+ * - build with 
-+ *   gcc sx-at91.c -o sx-at91
-+ *
-+ * - Howto use this program with minicom/xminicom and AT91 
-+ *   start minicom or xminicom
-+ *   edit Options / File transfer protocol, 
-+ *   add a name (for example J) like the following example
-+ *
-+ *   |     Name             Program                 Name U/D FullScr IO-Red. Multi  |
-+ *   | A  zmodem     /usr/bin/sz -vv -b              Y    U    N       Y       Y    |
-+ *   | B  ymodem     /usr/bin/sb -vv                 Y    U    N       Y       Y    |
-+ *   | C  xmodem     /usr/bin/sx -vv                 Y    U    N       Y       N    |
-+ *   | D  zmodem     /usr/bin/rz -vv -b -E           N    D    N       Y       Y    |
-+ *   | E  ymodem     /usr/bin/rb -vv                 N    D    N       Y       Y    |
-+ *   | F  xmodem     /usr/bin/rx -vv                 Y    D    N       Y       N    |
-+ *   | G  kermit     /usr/bin/kermit -i -l %l -s     Y    U    Y       N       N    |
-+ *   | H  kermit     /usr/bin/kermit -i -l %l -r     N    D    Y       N       N    |
-+ *   | I  ascii      /usr/bin/ascii-xfr -dsv         Y    U    N       Y       N    |
-+ *   | J  at91       /home/koan/xmodem/xs-at91       Y    U    Y       N       N    |
-+ *   | K    -                                                                       |
-+ *   | L    -                                                                       |
-+ *
-+ *   save and use it selecting at91 protocol when you start an Xmodem upload to AT91
-+ *
-+ *************************************************************************************
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include     <stdio.h>
-+#include     <stdlib.h>
-+#include     <unistd.h>
-+#include     <sys/types.h>
-+#include     <sys/stat.h>
-+#include     <fcntl.h>
-+#include     <termios.h>
-+#include     <errno.h>
-+#include     <time.h>
-+
-+/*
-+Xmodem Frame form: <SOH><blk #><255-blk #><--128 data bytes--><CRC hi><CRC lo>
-+*/
-+
-+#define XMODEM_SOH 0x01
-+#define XMODEM_STX 0x02
-+#define XMODEM_EOT 0x04
-+#define XMODEM_ACK 0x06
-+#define XMODEM_NAK 0x15
-+#define XMODEM_CRC_CHR	'C'
-+#define XMODEM_CRC_SIZE 2			/* Crc_High Byte + Crc_Low Byte */
-+#define XMODEM_FRAME_ID_SIZE 2 /* Frame_Id + 255-Frame_Id */
-+#define XMODEM_DATA_SIZE_SOH 128  /* for Xmodem protocol */
-+#define XMODEM_DATA_SIZE_STX 1024 /* for 1K xmodem protocol */
-+#define USE_1K_XMODEM 0  /* 1 for use 1k_xmodem 0 for xmodem */
-+
-+#if (USE_1K_XMODEM)
-+	#define XMODEM_DATA_SIZE 	XMODEM_DATA_SIZE_STX
-+	#define XMODEM_HEAD		XMODEM_STX
-+#else
-+	#define XMODEM_DATA_SIZE 	XMODEM_DATA_SIZE_SOH
-+	#define XMODEM_HEAD 		XMODEM_SOH
-+#endif
-+/*********/
-+
-+#define SERIAL_DEVICE "/dev/ttyS0"
-+#define MYBAUDRATE B115200
-+
-+/***************SUB PROGRAM*******/
-+unsigned short GetCrc16 ( char *ptr, unsigned short count )
-+{
-+	unsigned short crc, i;
-+
-+	crc = 0;
-+	while(count--)
-+	{
-+		crc = crc ^ (int) *ptr++ << 8;
-+	
-+		for(i = 0; i < 8; i++)
-+		{
-+			if(crc & 0x8000)
-+				crc = crc << 1 ^ 0x1021;
-+			else			
-+				crc = crc << 1;
-+		}
-+	}
-+
-+	return (crc & 0xFFFF);
-+}
-+
-+/*******************************/
-+int Initial_SerialPort(void)
-+{
-+	int fd;
-+	struct termios options;
-+
-+	fd = open( SERIAL_DEVICE , O_RDWR | O_NOCTTY | O_NDELAY );
-+	if ( fd == -1 )
-+	{ 
-+		/*open error!*/
-+		perror("Can't open serial port!");
-+		return -1;
-+	}
-+
-+	/*Get the current options for the port...*/
-+	tcgetattr(fd, &options);
-+
-+	/*Set the baud rates to BAUDRATE...*/
-+	cfsetispeed(&options,MYBAUDRATE);
-+	cfsetospeed(&options,MYBAUDRATE);
-+	tcsetattr(fd, TCSANOW, &options);
-+	if (0 != tcgetattr(fd, &options)) 
-+	{
-+		perror("SetupSerial 1");
-+		return -1;
-+	} 
-+	
-+	/*
-+	 * 8bit Data,no partity,1 stop bit...
-+	 */
-+	options.c_cflag &= ~PARENB;
-+	options.c_cflag &= ~CSTOPB;
-+	options.c_cflag &= ~CSIZE;
-+	options.c_cflag |= CS8;
-+	tcflush(fd,TCIFLUSH);
-+
-+	/***Choosing Raw Input*/
-+	options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
-+	options.c_oflag &= ~OPOST; 
-+
-+	/*
-+	 * Set the new options for the port...
-+	 */
-+	if (0 != tcsetattr(fd, TCSANOW, &options))
-+	{
-+ 		perror("SetupSerial error");
-+ 		return -1 ;
-+	}
-+
-+	return fd ;
-+}
-+
-+/******************************/
-+void ClearReceiveBuffer(int fd)
-+{
-+	unsigned char tmp;
-+	while ((read(fd,&tmp,1))>0);
-+	
-+	return;
-+}
-+
-+/********************************/
-+int main(int argc,char *argv[])
-+{
-+	int fd;
-+	char *data_file_name;
-+	char packet_data[ XMODEM_DATA_SIZE ];
-+	char frame_data[ XMODEM_DATA_SIZE + XMODEM_CRC_SIZE + XMODEM_FRAME_ID_SIZE + 1 ];
-+	FILE *datafile;
-+	int complete,retry_num,pack_counter,read_number,write_number,i;
-+	unsigned short crc_value;
-+	unsigned char ack_id;
-+
-+	printf("sx-at91 started...\r\n");
-+	
-+	/* open serial port1 */
-+	if ( (fd = Initial_SerialPort()) == -1)  
-+		return -1 ;
-+
-+	data_file_name = argv[1];
-+
-+	if((datafile=fopen(data_file_name,"rb"))==NULL)
-+	{
-+		perror ("Can't open file!");
-+		return -1 ;
-+	}
-+
-+	/*******************************/
-+	
-+	pack_counter = 0;
-+	complete = 0;
-+	retry_num = 0;
-+	ClearReceiveBuffer(fd);
-+
-+	while((read(fd,&ack_id,1))<=0);
-+	
-+	printf("%c\r\n",ack_id);
-+	ack_id=XMODEM_ACK;
-+	while(!complete)
-+	{
-+		switch(ack_id)
-+		{
-+		case XMODEM_ACK:
-+			retry_num = 0;
-+			pack_counter++;
-+			read_number = fread( packet_data, sizeof(char), XMODEM_DATA_SIZE, datafile);
-+			if(read_number>0)
-+			{
-+				if(read_number<XMODEM_DATA_SIZE_SOH)
-+				{
-+			
-+					printf("Start filling the last frame!\r\n");
-+					for(;read_number<XMODEM_DATA_SIZE;read_number++)
-+						packet_data[read_number] = 0x00;
-+				}
-+				frame_data[0] = XMODEM_HEAD;
-+				frame_data[1] = (char)pack_counter;
-+				frame_data[2] = (char)(255-frame_data[1]);
-+	
-+				for(i=0;i<XMODEM_DATA_SIZE;i++)
-+					frame_data[i+3]=packet_data[i];
-+	
-+				crc_value = GetCrc16(packet_data,XMODEM_DATA_SIZE);
-+				frame_data[XMODEM_DATA_SIZE_SOH+3]=(unsigned char)(crc_value >> 8);
-+				frame_data[XMODEM_DATA_SIZE_SOH+4]=(unsigned char)(crc_value);
-+				write_number = write( fd, frame_data, XMODEM_DATA_SIZE_SOH + 5);
-+				printf("waiting for ACK,%d,%d,...",pack_counter,write_number);
-+				while((read(fd,&ack_id,1))<=0);
-+			
-+				if(ack_id == XMODEM_ACK)
-+					printf("Ok!\r\n");
-+				else
-+					printf("Error!\r\n");
-+			}
-+			else
-+			{
-+				ack_id = XMODEM_EOT;
-+				complete = 1;
-+				printf("Waiting for complete ACK ...");
-+			
-+				while(ack_id != XMODEM_ACK)
-+				{
-+					ack_id = XMODEM_EOT;	
-+					write_number=write(fd,&ack_id,1);
-+					while((read(fd,&ack_id,1))<=0);
-+				}
-+				printf("OK\r\n");
-+		
-+				printf("Sending file complete\r\n");
-+			}
-+		break;
-+
-+		case XMODEM_NAK:
-+			if( retry_num++ > 10) 
-+			{
-+				printf("Retry too many times,Quit!\r\n");
-+				complete = 1;
-+			}
-+			else
-+			{
-+				write_number = write(fd,frame_data,XMODEM_DATA_SIZE + 5);
-+				printf("Retry for ACK,%d,%d...",pack_counter,write_number);
-+				while((read(fd,&ack_id,1))<=0);
-+				
-+				if( ack_id == XMODEM_ACK )
-+					printf("OK\r\n");
-+				else
-+					printf("Error!\r\n");
-+			}
-+		break;
-+
-+		default:
-+			printf("Fatal Error!\r\n");
-+			complete = 1;
-+		break;
-+		}
-+
-+	}
-+
-+	fclose(datafile);
-+	close(fd);
-+
-+	return 0;
-+}
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-008-Makefile.patch b/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-008-Makefile.patch
deleted file mode 100644
index 176eed55d..000000000
--- a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-008-Makefile.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-diff -urN u-boot-2008.10-0rig//Makefile u-boot-2008.10/Makefile
---- u-boot-2008.10-0rig//Makefile	2008-12-31 18:11:18.000000000 +0100
-+++ u-boot-2008.10/Makefile	2008-12-31 18:39:58.000000000 +0100
-@@ -20,6 +20,7 @@
- # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- # MA 02111-1307 USA
- #
-+BUILD_DATE= $(shell date +%F)
- 
- VERSION = 2008
- PATCHLEVEL = 10
-@@ -294,6 +295,22 @@
- ALL += $(obj)u-boot.ldr
- endif
- 
-+ifneq ($(BOARDNAME),)
-+BINARY := $(BOARDNAME)-u-boot-$(U_BOOT_VERSION)-$(BUILD_DATE)
-+BINARY_BIN := $(obj)$(BINARY).bin
-+BINARY_GZ  := $(obj)$(BINARY).gz
-+ALL += $(BINARY_BIN)
-+ALL += $(BINARY_GZ)
-+else
-+BINARY := u-boot
-+BINARY_BIN := $(obj)$(BINARY).bin
-+BINARY_GZ  := $(obj)$(BINARY).gz
-+endif
-+
-+ifeq ($(DESTDIR),)
-+DESTDIR=binaries
-+endif
-+
- all:		$(ALL)
- 
- $(obj)u-boot.hex:	$(obj)u-boot
-@@ -302,9 +319,20 @@
- $(obj)u-boot.srec:	$(obj)u-boot
- 		$(OBJCOPY) -O srec $< $@
- 
--$(obj)u-boot.bin:	$(obj)u-boot
-+$(BINARY_BIN):	$(obj)u-boot
- 		$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
- 
-+$(BINARY_GZ):	$(BINARY_BIN)
-+		gzip -c $(BINARY_BIN) > $(BINARY_GZ)
-+
-+install:	all
-+		-install -d	$(DESTDIR)
-+		install		$(BINARY_BIN)	$(DESTDIR)
-+
-+tftp:		install
-+		cp $(BINARY_GZ)				$(TFTPBOOT)/$(BINARY).gz
-+		cp $(BINARY_BIN) 			$(TFTPBOOT)/$(BINARY).bin
-+
- $(obj)u-boot.ldr:	$(obj)u-boot
- 		$(LDR) -T $(CONFIG_BFIN_CPU) -f -c $@ $< $(LDR_FLAGS)
- 
-@@ -3295,6 +3324,7 @@
- 		-o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
- 		-print0 \
- 		| xargs -0 rm -f
-+	@rm -f $(obj)u-boot-*.gz
- 	@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
- 		$(obj)cscope.* $(obj)*.*~
- 	@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-009-factory.patch b/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-009-factory.patch
deleted file mode 100644
index 7d1c958dc..000000000
--- a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-009-factory.patch
+++ /dev/null
@@ -1,323 +0,0 @@
-diff -urN u-boot-2009.01-0rig//common/cmd_factory.c u-boot-2009.01/common/cmd_factory.c
---- u-boot-2009.01-0rig//common/cmd_factory.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01/common/cmd_factory.c	2009-01-02 19:32:07.000000000 +0100
-@@ -0,0 +1,308 @@
-+/*
-+ * (C) Copyright 2000
-+ * Ulf Samuelsson	<ulf.samuelsson@atmelcom>.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+/*
-+ * Boot support
-+ */
-+#include <config.h>
-+#include <common.h>
-+#include <command.h>
-+#include <dataflash.h>
-+
-+/* 
-+ * 
-+ * The typical use of this file, is to update config.h
-+ * from an external build system
-+ * 
-+ */
-+
-+
-+/*
-+ * Macros to transform values
-+ * into environment strings.
-+ */
-+#define XMK_STR(x)		#x
-+#define MK_STR(x)		XMK_STR(x)
-+
-+void		setargs(void);
-+
-+int do_factory_defaults (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+#if	defined(CONFIG_ETHADDR)
-+	setenv("ethaddr",	MK_STR(CONFIG_ETHADDR));
-+#endif
-+#if	defined(CONFIG_ETH1ADDR)
-+	setenv("eth1addr",	MK_STR(CONFIG_ETH1ADDR));
-+#endif
-+#if	defined(CONFIG_HOSTNAME)
-+	setenv("hostname",	MK_STR(CONFIG_HOSTNAME));
-+#endif
-+#if	defined(CONFIG_IPADDR)
-+	setenv("ipaddr",	MK_STR(CONFIG_IPADDR));
-+#endif
-+#if	defined(CONFIG_SERVERIP)
-+	setenv("serverip",	MK_STR(CONFIG_SERVERIP));
-+#endif
-+#if	defined(CONFIG_GATEWAY)
-+	setenv("gatewayip",	MK_STR(CONFIG_GATEWAY));
-+#endif
-+#if	defined(CONFIG_NETMASK)
-+	setenv("netmask",	MK_STR(CONFIG_NETMASK));
-+#endif
-+#if	defined(KERNEL_START)
-+	setenv("kernel",	MK_STR(KERNEL_START));
-+#endif
-+#if	defined(KERNEL_LOCATION)
-+	setenv("OS",		MK_STR(KERNEL_LOCATION));
-+#endif
-+#if	defined(FILESYSTEM_START)
-+	setenv("ramdisk",	MK_STR(FILESYSTEM_START));
-+	setenv("initrd",	MK_STR(FILESYSTEM_START)","MK_STR(FILESYSTEM_SIZE));
-+#endif
-+#if	defined(FILESYSTEM_LOCATION)
-+	setenv("FS",		MK_STR(FS_LOCATION));
-+#endif
-+#if	defined(END_OF_FLASH)
-+	setenv("endflash",	MK_STR(END_OF_FLASH));
-+#endif
-+#if	defined(CONFIG_LOAD_SCRIPTS)
-+	/* By updating the "fs-date" environment variable and running "fs"
-+	   You set "rd-1" and "rd-2"
-+	*/ 
-+	setenv("rd-1",		"rootfs.arm-"MK_STR(DATE)".ext2");
-+	setenv("rd-2",		"rootfs.arm-"MK_STR(DATE)".jffs2");
-+	setenv("rd-3",		"rootfs.arm-linux.ext2");
-+	setenv("rd-4",		"rootfs.arm-linux.jffs2");
-+	setenv("ver",		"1");
-+
-+	setenv("config",	"tftp  ${ramdisk} autoscript.${hostname} ; autoscr ${ramdisk} ");
-+
-+#if	defined(KERNEL_VERSION)
-+	setenv("kernel-version",MK_STR(KERNEL_VERSION));
-+#endif
-+#if	defined(DATE)
-+	setenv("kernel-date",	MK_STR(DATE));
-+	setenv("fs-date",	MK_STR(DATE));
-+	setenv("rd",		"rootfs.arm-"MK_STR(DATE)".ext2");
-+#endif
-+#if	defined(KERNEL_VERSION)
-+	setenv("linux",		MK_STR(BOARD_NAME)"-linux-"MK_STR(KERNEL_VERSION)"-"MK_STR(DATE)".gz");
-+#endif
-+	setenv("get-ramdisk",	"tftp	${ramdisk}	${rd};		setenv rd-size	${filesize}");
-+	setenv("store-ramdisk",	"cp.b	${ramdisk}	${FS}		${rd-size}");
-+	setenv("load-ramdisk",	"cp.b	${FS}		${ramdisk}	${rd-size}");
-+	setenv("flash-ramdisk",	"run	get-ramdisk;	run		store-ramdisk");
-+
-+	setenv("get-kernel",	"tftp	${kernel}	${linux};	setenv	kernel-size	${filesize}");
-+	setenv("store-kernel",	"cp.b	${kernel}	${OS}		${kernel-size};		saveenv");
-+	setenv("load-kernel",	"cp.b	${OS}		${kernel}	${kernel-size};		saveenv");
-+	setenv("flash-kernel",	"run	get-kernel;	run		store-kernel");
-+
-+	setenv("get",		"run get-kernel		; run get-ramdisk");
-+	setenv("flash",		"run flash-kernel	; run flash-ramdisk ; saveenv");
-+	setenv("load",		"run load-kernel	; run load-ramdisk");
-+
-+	setenv("bootcmd",	"run load ; bootm "MK_STR(KERNEL_START));
-+
-+	setenv("fstype",	"ram");
-+	setenv("flashfs",	"/dev/mtdblock2");
-+	setenv("ramfs",		"/dev/ram");
-+
-+	setenv("rootfstype",	"jffs2");
-+	setenv("access",	"rw");
-+	setenv("ramdisk_size",	"15360");
-+	setenv("console",	"ttyS0,115200");
-+
-+
-+#if	defined(MEMORY_SIZE)
-+	setenv("mem",		MK_STR(MEMORY_SIZE));
-+#else
-+	setenv("mem",		"32M");	/* Cautious default */
-+#endif
-+
-+	setenv("update",	"os; fs; setargs");
-+	setenv("cmpk",		"run flash-kernel; cp.b ${OS} ${ramdisk} ${kernel-size}; cmp ${kernel} ${ramdisk} ${kernel-size}"); 
-+#endif	/* CONFIG_LOAD_SCRIPTS */
-+#if	defined(CONFIG_AT91RM9200)
-+	setenv("machid24",	"0x0fb");
-+	setenv("machid26",	"0x2c1");
-+	setenv("machid",	"0x2c1");
-+	setenv("k24",		"setenv machid ${machid24}; os");
-+	setenv("k26",		"setenv machid ${machid26}; os");
-+#endif
-+	AT91F_DataflashSetEnv ();
-+#if	defined(CONFIG_LOAD_SCRIPTS)
-+	setargs();
-+#endif
-+	return (saveenv() ? 1 : 0);
-+}
-+
-+
-+
-+U_BOOT_CMD(
-+	factory,	1,	1,	do_factory_defaults,
-+	"factory\t- Create a default environment\n",
-+	"\n"
-+);
-+
-+#if	defined(CONFIG_LOAD_SCRIPTS)
-+void		setargs(void)
-+{
-+	char cmd[512];
-+	char fstype[512];
-+
-+	sprintf(fstype,getenv("fstype"));
-+	if((fstype[0] != 'f') && (fstype[0] != 'r')) {
-+		fstype[0] = 'r';
-+	}
-+
-+	if(fstype[0] == 'f') {
-+		sprintf(cmd,"root=%s rootfstype=%s ip=%s:%s:%s:%s console=%s,mem=%s",
-+			getenv("flashfs"),
-+			getenv("rootfstype"),
-+			getenv("ipaddr"),
-+			getenv("serverip"),
-+			getenv("gatewayip"),
-+			getenv("netmask"),
-+			getenv("console"),
-+			getenv("mem")
-+		);
-+		cmd[511] = '\0';
-+		printf("len=%d: %s\n",strlen(cmd),cmd);
-+		if(strlen(cmd) > 500) {
-+			printf("Error: Environment too large during 'setargs'\n");
-+		} else {
-+			setenv("bootargs",cmd);
-+			setenv("bootcmd",	"run load-kernel ; bootm 21000000");
-+		}
-+	} else if(fstype[0] == 'r') {
-+		sprintf(cmd,"root=%s %s initrd=%s ramdisk_size=%s ip=%s:%s:%s:%s console=%s,mem=%s",
-+			getenv("ramfs"),
-+			getenv("access"),
-+			getenv("initrd"),
-+			getenv("ramdisk_size"),
-+			getenv("ipaddr"),
-+			getenv("serverip"),
-+			getenv("gatewayip"),
-+			getenv("netmask"),
-+			getenv("console"),
-+			getenv("mem")
-+		);
-+		printf("len=%d: %s\n",strlen(cmd),cmd);
-+		cmd[511] = '\0';
-+		if(strlen(cmd) > 500) {
-+			printf("Error: Environment too large during 'setargs'\n");
-+		} else {
-+			setenv("bootargs",cmd);
-+			setenv("bootcmd",	"run load ; bootm 21000000");
-+		}
-+	} else {
-+		setenv("bootargs","no args");
-+	}
-+}
-+
-+int do_setargs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+	setargs();
-+	return 0;
-+}
-+
-+U_BOOT_CMD(
-+	setargs,	1,	1,	do_setargs,
-+	"setargs\t- Create a bootargs from:"
-+	"fstype=flash:	(${flash} ${access} ${initrd} ${ramdisk_size}) "
-+	"fstype=ram:	(${ram}   ${access} ${initrd} ${ramdisk_size}) "
-+	"${ipaddr} ${serverip} ${gatewayip} ${netmask} "
-+	"${console} ${mem}\n"
-+	,	"\n"
-+);
-+
-+int do_os (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+	char *kchip;
-+	char *kdate;
-+	char *kver;
-+	char cmd[512];
-+	kchip = getenv("hostname");
-+	kdate = getenv("kernel-date");
-+	kver = getenv("kernel-version");
-+	if((strlen(kdate) + strlen(kver) + 32) >  500) {
-+		printf("Error: Environment too large during 'os': ");
-+		printf("len=%d\n", strlen(kdate) + strlen(kver) + 32);
-+	} else if(kver != NULL) {
-+		if(kdate != NULL) {
-+			sprintf(cmd,"%s-linux-%s-%s.gz",kchip,kver,kdate);
-+		} else {
-+			sprintf(cmd,"%s-linux-%s.gz",kchip,kver);
-+		}
-+		printf("Setting kernel to %s\n",cmd);
-+		setenv("linux",cmd);
-+		return 0;
-+	}
-+	return 1;
-+}
-+
-+U_BOOT_CMD(
-+	os,	1,	1,	do_os,
-+	"os\t- Select linux version  ${hostname}-linux-${kernel-name}-${kernel-date}\n"
-+	,	"\n"
-+);
-+
-+
-+int do_fs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+	char *ver;
-+	char *fsdate;
-+	char *hostname;
-+	char cmd[512];
-+	fsdate		= getenv("fs-date");
-+	hostname	= getenv("hostname");
-+
-+	if(fsdate != NULL) {
-+		sprintf(cmd,"rootfs.arm-%s.ext2",fsdate);
-+		setenv("rd-1",cmd);
-+		sprintf(cmd,"rootfs.arm-%s.jffs2",fsdate);
-+		setenv("rd-2",cmd);
-+	}
-+	ver = getenv("ver");		/* Find out which version we are using*/
-+	if(cmd==NULL) {
-+		setenv("ver","1");
-+	}
-+	ver = getenv("ver");		/* Find out which version we are using*/
-+	sprintf(cmd,"rd-%s",ver);	/* create rd${ver}*/
-+	ver=getenv(cmd);
-+	sprintf(cmd,"%s",ver);
-+	printf("Setting ramdisk to %s\n",cmd);
-+	setenv("rd",cmd);
-+	return 0;
-+}
-+
-+
-+U_BOOT_CMD(
-+	fs,	1,	1,	do_fs,
-+	"fs\t- Select ramdisk version == rd-${ver}\n"
-+	,	"\n"
-+);
-+#endif /* #if	defined(CONFIG_LOAD_SCRIPTS) */
-+
-+
-diff -urN u-boot-2009.01-0rig//common/Makefile u-boot-2009.01/common/Makefile
---- u-boot-2009.01-0rig//common/Makefile	2008-12-16 23:48:27.000000000 +0100
-+++ u-boot-2009.01/common/Makefile	2009-01-02 19:17:16.000000000 +0100
-@@ -84,6 +84,7 @@
- COBJS-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o
- COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o
- COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o
-+COBJS-$(CONFIG_CMD_FACTORY) += cmd_factory.o
- COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o
- COBJS-$(CONFIG_CMD_FDC)$(CONFIG_CMD_FDOS) += cmd_fdc.o
- COBJS-$(CONFIG_OF_LIBFDT) += cmd_fdt.o fdt_support.o
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-010-coloured_led.patch b/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-010-coloured_led.patch
deleted file mode 100644
index 5c1d29dce..000000000
--- a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-010-coloured_led.patch
+++ /dev/null
@@ -1,196 +0,0 @@
-diff -urN u-boot-2009.01-0rig//common/cmd_led.c u-boot-2009.01/common/cmd_led.c
---- u-boot-2009.01-0rig//common/cmd_led.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01/common/cmd_led.c	2009-01-03 23:39:57.000000000 +0100
-@@ -0,0 +1,84 @@
-+/*
-+ * (C) Copyright 2008
-+ * Ulf Samuelsson <ulf.samuelsson@atmel.com>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+/*
-+ * This file provides a shell like 'test' function to return
-+ * true/false from an integer or string compare of two memory
-+ * locations or a location and a scalar/literal.
-+ * A few parts were lifted from bash 'test' command
-+ */
-+
-+#include <common.h>
-+#include <config.h>
-+#include <command.h>
-+#include <coloured_led.h>
-+
-+int do_led ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
-+{
-+	int	led;
-+	/* Validate arguments */
-+	if ((argc != 3)){
-+		printf("Usage:\n%s\n", cmdtp->usage);
-+		return 1;
-+	}
-+	if (strcmp(argv[1], "1") == 0) {
-+		led = (1 << 0);
-+	} else if (strcmp(argv[1], "2") == 0) {
-+		led = (1 << 1);
-+	} else if (strcmp(argv[1], "3") == 0) {
-+		led = (1 << 2);
-+	} else if (strcmp(argv[1], "green") == 0) {
-+		led = (1 << 0);
-+	} else if (strcmp(argv[1], "yellow") == 0) {
-+		led = (1 << 1);
-+	} else if (strcmp(argv[1], "red") == 0) {
-+		led = (1 << 2);
-+	} else if (strcmp(argv[1], "all") == 0) {
-+		led = 7;
-+	} else {
-+		printf ("Usage:\n%s\n", cmdtp->usage);
-+		return 1;
-+	}
-+
-+	if (strcmp(argv[2], "off") == 0) {
-+		if(led & 1) green_LED_off();
-+		if(led & 2) yellow_LED_off();
-+		if(led & 4) red_LED_off();		
-+	} else if (strcmp(argv[2], "on") == 0) {
-+		if(led & 1) green_LED_on();
-+		if(led & 2) yellow_LED_on();
-+		if(led & 4) red_LED_on();		
-+	} else {
-+		printf ("Usage:\n%s\n", cmdtp->usage);
-+		return 1;
-+	}
-+
-+	return 0;
-+}
-+
-+U_BOOT_CMD(
-+	led, 3, 1, do_led,
-+	"led\t- [1|2|3|green|yellow|red|all] [on|off]\n",
-+	"led [1|2|3|green|yellow|red|all] [on|off] sets /clears led 1,2,3\n"
-+);
-+
-diff -urN u-boot-2009.01-0rig//common/Makefile u-boot-2009.01/common/Makefile
---- u-boot-2009.01-0rig//common/Makefile	2009-01-02 21:18:24.000000000 +0100
-+++ u-boot-2009.01/common/Makefile	2009-01-03 23:41:53.000000000 +0100
-@@ -99,6 +99,7 @@
- COBJS-$(CONFIG_CMD_IRQ) += cmd_irq.o
- COBJS-$(CONFIG_CMD_ITEST) += cmd_itest.o
- COBJS-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o
-+COBJS-$(CONFIG_CMD_LED) += cmd_led.o
- COBJS-$(CONFIG_CMD_LICENSE) += cmd_license.o
- COBJS-y += cmd_load.o
- COBJS-$(CONFIG_LOGBUFFER) += cmd_log.o
-diff -urN u-boot-2009.01-0rig//include/coloured_led.h u-boot-2009.01/include/coloured_led.h
---- u-boot-2009.01-0rig//include/coloured_led.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01/include/coloured_led.h	2009-01-03 23:39:19.000000000 +0100
-@@ -0,0 +1,62 @@
-+/*
-+ * (C) Copyright 2008
-+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+ * 
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+/*
-+ * The purpose of this code is to signal the operational status of a
-+ * target which usually boots over the network; while running in
-+ * PCBoot, a status LED is blinking. As soon as a valid BOOTP reply
-+ * message has been received, the LED is turned off. The Linux
-+ * kernel, once it is running, will start blinking the LED again,
-+ * with another frequency.
-+ */
-+
-+#ifndef _COLOURED_LED_H_
-+#define	_COLOURED_LED_H_
-+
-+#ifdef CONFIG_COLOURED_LED
-+
-+/*
-+ * Coloured LEDs API
-+ */
-+#ifndef	__ASSEMBLY__
-+extern void	coloured_LED_init (void);
-+extern void	red_LED_on(void);
-+extern void	red_LED_off(void);
-+extern void	green_LED_on(void);
-+extern void	green_LED_off(void);
-+extern void	yellow_LED_on(void);
-+extern void	yellow_LED_off(void);
-+#else
-+	.extern LED_init
-+	.extern red_LED_on
-+	.extern red_LED_off
-+	.extern yellow_LED_on
-+	.extern yellow_LED_off
-+	.extern green_LED_on
-+	.extern green_LED_off
-+#endif
-+
-+#endif	/* CONFIG_COLOURED_LED	*/
-+
-+#endif	/* _STATUS_COLOURED_H_	*/
-+
-diff -urN u-boot-2009.01-0rig//include/status_led.h u-boot-2009.01/include/status_led.h
---- u-boot-2009.01-0rig//include/status_led.h	2008-12-16 23:48:27.000000000 +0100
-+++ u-boot-2009.01/include/status_led.h	2009-01-03 23:44:40.000000000 +0100
-@@ -383,27 +383,6 @@
- # include <asm/status_led.h>
- #endif
- 
--/*
-- * Coloured LEDs API
-- */
--#ifndef	__ASSEMBLY__
--extern void	coloured_LED_init (void);
--extern void	red_LED_on(void);
--extern void	red_LED_off(void);
--extern void	green_LED_on(void);
--extern void	green_LED_off(void);
--extern void	yellow_LED_on(void);
--extern void	yellow_LED_off(void);
--#else
--	.extern LED_init
--	.extern red_LED_on
--	.extern red_LED_off
--	.extern yellow_LED_on
--	.extern yellow_LED_off
--	.extern green_LED_on
--	.extern green_LED_off
--#endif
--
- #endif	/* CONFIG_STATUS_LED	*/
- 
- #endif	/* _STATUS_LED_H_	*/
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-011-spimux.patch b/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-011-spimux.patch
deleted file mode 100644
index 8ab469fd8..000000000
--- a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-011-spimux.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-diff -urN u-boot-2009.01-0rig//common/cmd_mux.c u-boot-2009.01/common/cmd_mux.c
---- u-boot-2009.01-0rig//common/cmd_mux.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01/common/cmd_mux.c	2009-01-04 00:17:19.000000000 +0100
-@@ -0,0 +1,78 @@
-+/*
-+ * (C) Copyright 2008
-+ * Ulf Samuelsson <ulf.samuelsson@atmel.com>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <command.h>
-+#if (defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF))
-+
-+#include <asm/arch/AT91RM9200.h>
-+#include <dataflash.h>
-+#include <at45.h>
-+
-+
-+static int mmc_nspi (const char *s)
-+{
-+	if (strcmp(s, "mmc") == 0) {
-+		return (1);
-+	} else if (strcmp(s, "spi") == 0) {
-+		return (0);
-+	}
-+	return (-1);
-+}
-+
-+int do_mux ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+	switch (argc) {
-+	case 2:			/* on / off	*/
-+		switch (mmc_nspi(argv[1])) {
-+#if 0	/* prevented by varargs handling; FALLTROUGH is harmless, too */
-+		default: printf ("Usage:\n%s\n", cmdtp->usage);
-+			return;
-+#endif
-+		case 0:	AT91F_SelectSPI ();
-+			break;
-+		case 1:	AT91F_SelectMMC ();
-+			break;
-+		}
-+		/* FALL TROUGH */
-+	case 1:			/* get status */
-+		printf ("Mux is configured to be %s\n",
-+			AT91F_GetMuxStatus() ? "MMC" : "SPI");
-+		return 0;
-+	default:
-+		printf ("Usage:\n%s\n", cmdtp->usage);
-+		return 1;
-+	}
-+	return 0;
-+}
-+
-+
-+U_BOOT_CMD(
-+	mux,   2,   1,     do_mux,
-+	"mux\t- enable or disable MMC or SPI\n",
-+	"[mmc, spi]\n"
-+	"    - enable or disable MMC or SPI\n"
-+);
-+
-+#endif	/* CONFIG_CMD_MUX */
-+
-diff -urN u-boot-2009.01-0rig//common/Makefile u-boot-2009.01/common/Makefile
---- u-boot-2009.01-0rig//common/Makefile	2009-01-04 00:10:28.000000000 +0100
-+++ u-boot-2009.01/common/Makefile	2009-01-04 00:20:39.000000000 +0100
-@@ -112,6 +112,7 @@
- COBJS-$(CONFIG_CMD_MISC) += cmd_misc.o
- COBJS-$(CONFIG_CMD_MMC) += cmd_mmc.o
- COBJS-$(CONFIG_MP) += cmd_mp.o
-+COBJS-$(CONFIG_CMD_AT91_SPIMUX) += cmd_mux.o
- COBJS-y += cmd_nand.o
- COBJS-$(CONFIG_CMD_NET) += cmd_net.o
- COBJS-$(CONFIG_CMD_ONENAND) += cmd_onenand.o
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-012-ethinit.patch b/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-012-ethinit.patch
deleted file mode 100644
index c2f709c70..000000000
--- a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-012-ethinit.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-diff -urN u-boot-2009.01-0rig//common/cmd_ethinit.c u-boot-2009.01/common/cmd_ethinit.c
---- u-boot-2009.01-0rig//common/cmd_ethinit.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2009.01/common/cmd_ethinit.c	2009-01-04 00:28:39.000000000 +0100
-@@ -0,0 +1,62 @@
-+/*
-+ * (C) Copyright 2000
-+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+/*
-+ * Boot support
-+ */
-+#include <common.h>
-+#include <command.h>
-+#include <net.h>
-+#ifdef CONFIG_CMD_ETHINIT
-+extern int eth_init (bd_t * bd);
-+
-+static void	delay(void)
-+{
-+}
-+/* 
-+ * This command allows you to delay booting until you have a 
-+ * valid Ethernet connection.
-+ * Neccessary if you want to NFS mount a rootfs etc.
-+ * When both this target and the NFS server 
-+ * are powered on at the same time, then the NFS
-+ * server can take a long time to boot.
-+ */
-+int do_ethinit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+	int	i;
-+	DECLARE_GLOBAL_DATA_PTR;
-+	while(eth_init (gd->bd) == 0) {
-+		for(i = 0; i < 10000000; i ++) {
-+			delay();
-+		}
-+	}
-+	return 0;
-+}
-+
-+U_BOOT_CMD(
-+	ethinit,	1,	1,	do_ethinit,
-+	"ethinit\t- Initialize Ethernet controller\n",
-+	"\n"
-+);
-+
-+#endif	/* CONFIG_CMD_ETHINIT */
-diff -urN u-boot-2009.01-0rig//common/Makefile u-boot-2009.01/common/Makefile
---- u-boot-2009.01-0rig//common/Makefile	2009-01-04 00:22:06.000000000 +0100
-+++ u-boot-2009.01/common/Makefile	2009-01-04 00:29:46.000000000 +0100
-@@ -83,6 +83,7 @@
- COBJS-$(CONFIG_ENV_IS_IN_EEPROM) += cmd_eeprom.o
- COBJS-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o
- COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o
-+COBJS-$(CONFIG_CMD_ETHINIT) += cmd_ethinit.o
- COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o
- COBJS-$(CONFIG_CMD_FACTORY) += cmd_factory.o
- COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-013-configs.patch b/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-013-configs.patch
deleted file mode 100644
index e65645b69..000000000
--- a/target/device/Atmel/arch-arm/u-boot/2009.01/u-boot-2009.01-013-configs.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-diff -urN u-boot-2009.01-0rig//include/configs/at91cap9adk.h u-boot-2009.01/include/configs/at91cap9adk.h
---- u-boot-2009.01-0rig//include/configs/at91cap9adk.h	2008-12-16 23:48:27.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91cap9adk.h	2009-01-04 00:43:58.000000000 +0100
-@@ -69,7 +69,9 @@
- #define CONFIG_ATMEL_LCD		1
- #define CONFIG_ATMEL_LCD_BGR555		1
- #define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
--
-+#define CONFIG_CMD_FACTORY
-+#define CONFIG_CMD_LED
-+#define CONFIG_COLOURED_LED
- #define CONFIG_BOOTDELAY	3
- 
- /*
-diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200df.h u-boot-2009.01/include/configs/at91rm9200df.h
---- u-boot-2009.01-0rig//include/configs/at91rm9200df.h	2009-01-02 17:37:43.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91rm9200df.h	2009-01-04 00:43:33.000000000 +0100
-@@ -123,6 +123,9 @@
- #define CONFIG_CMD_DHCP
- #define CONFIG_CMD_MII
- #define CONFIG_CMD_NAND
-+#define CONFIG_CMD_FACTORY
-+#define CONFIG_CMD_LED
-+#define CONFIG_COLOURED_LED
- #define CONFIG_CMD_AT91_SPIMUX
- #define CONFIG_CMD_ETHINIT
- 
-diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200dk_df.h u-boot-2009.01/include/configs/at91rm9200dk_df.h
---- u-boot-2009.01-0rig//include/configs/at91rm9200dk_df.h	2009-01-02 10:03:11.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91rm9200dk_df.h	2009-01-04 00:42:52.000000000 +0100
-@@ -122,7 +122,11 @@
- #define CONFIG_CMD_DHCP
- #define CONFIG_CMD_MII
- #define CONFIG_CMD_NAND
-+#define CONFIG_CMD_FACTORY
-+#define CONFIG_CMD_LED
-+#define CONFIG_COLOURED_LED
- #define CONFIG_CMD_AT91_SPIMUX
-+#define CONFIG_CMD_ETHINIT
- 
- #define CONFIG_NAND_LEGACY
- 
-diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200dk.h u-boot-2009.01/include/configs/at91rm9200dk.h
---- u-boot-2009.01-0rig//include/configs/at91rm9200dk.h	2009-01-02 10:03:11.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91rm9200dk.h	2009-01-04 00:43:15.000000000 +0100
-@@ -120,7 +120,11 @@
- #define CONFIG_CMD_DHCP
- #define CONFIG_CMD_MII
- #define CONFIG_CMD_NAND
-+#define CONFIG_CMD_FACTORY
-+#define CONFIG_CMD_LED
-+#define CONFIG_COLOURED_LED
- #define CONFIG_CMD_AT91_SPIMUX
-+#define CONFIG_CMD_ETHINIT
- 
- #define CONFIG_NAND_LEGACY
- 
-diff -urN u-boot-2009.01-0rig//include/configs/at91rm9200ek.h u-boot-2009.01/include/configs/at91rm9200ek.h
---- u-boot-2009.01-0rig//include/configs/at91rm9200ek.h	2009-01-02 17:37:43.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91rm9200ek.h	2009-01-04 00:42:35.000000000 +0100
-@@ -121,9 +121,11 @@
- #define CONFIG_CMD_DHCP
- #define CONFIG_CMD_MII
- #define CONFIG_CMD_NAND
-+#define CONFIG_CMD_FACTORY
-+#define CONFIG_CMD_LED
-+#define CONFIG_COLOURED_LED
- #define CONFIG_CMD_AT91_SPIMUX
- #define CONFIG_CMD_ETHINIT
--
- #define CONFIG_NAND_LEGACY
- 
- #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
-diff -urN u-boot-2009.01-0rig//include/configs/at91sam9260ek.h u-boot-2009.01/include/configs/at91sam9260ek.h
---- u-boot-2009.01-0rig//include/configs/at91sam9260ek.h	2008-12-16 23:48:27.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91sam9260ek.h	2009-01-04 00:41:56.000000000 +0100
-@@ -74,10 +74,13 @@
- #include <config_cmd_default.h>
- #undef CONFIG_CMD_BDI
- #undef CONFIG_CMD_IMI
--#undef CONFIG_CMD_AUTOSCRIPT
-+#define CONFIG_CMD_AUTOSCRIPT
- #undef CONFIG_CMD_FPGA
- #undef CONFIG_CMD_LOADS
- #undef CONFIG_CMD_IMLS
-+#define CONFIG_CMD_FACTORY
-+#define CONFIG_CMD_LED
-+#define CONFIG_COLOURED_LED
- 
- #define CONFIG_CMD_PING		1
- #define CONFIG_CMD_DHCP		1
-diff -urN u-boot-2009.01-0rig//include/configs/at91sam9261ek.h u-boot-2009.01/include/configs/at91sam9261ek.h
---- u-boot-2009.01-0rig//include/configs/at91sam9261ek.h	2008-12-16 23:48:27.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91sam9261ek.h	2009-01-04 00:44:11.000000000 +0100
-@@ -68,6 +68,9 @@
- #define CONFIG_ATMEL_LCD		1
- #define CONFIG_ATMEL_LCD_BGR555		1
- #define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
-+#define CONFIG_CMD_FACTORY
-+#define CONFIG_CMD_LED
-+#define CONFIG_COLOURED_LED
- 
- #define CONFIG_BOOTDELAY	3
- 
-diff -urN u-boot-2009.01-0rig//include/configs/at91sam9263ek.h u-boot-2009.01/include/configs/at91sam9263ek.h
---- u-boot-2009.01-0rig//include/configs/at91sam9263ek.h	2008-12-16 23:48:27.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91sam9263ek.h	2009-01-04 00:44:34.000000000 +0100
-@@ -69,6 +69,9 @@
- #define CONFIG_ATMEL_LCD		1
- #define CONFIG_ATMEL_LCD_BGR555		1
- #define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
-+#define CONFIG_CMD_FACTORY
-+#define CONFIG_CMD_LED
-+#define CONFIG_COLOURED_LED
- 
- #define CONFIG_BOOTDELAY	3
- 
-diff -urN u-boot-2009.01-0rig//include/configs/at91sam9rlek.h u-boot-2009.01/include/configs/at91sam9rlek.h
---- u-boot-2009.01-0rig//include/configs/at91sam9rlek.h	2008-12-16 23:48:27.000000000 +0100
-+++ u-boot-2009.01/include/configs/at91sam9rlek.h	2009-01-04 00:44:54.000000000 +0100
-@@ -68,6 +68,9 @@
- #define CONFIG_ATMEL_LCD		1
- #define CONFIG_ATMEL_LCD_RGB565		1
- #define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
-+#define CONFIG_CMD_FACTORY
-+#define CONFIG_CMD_LED
-+#define CONFIG_COLOURED_LED
- 
- #define CONFIG_BOOTDELAY	3
- 
diff --git a/target/device/Atmel/arch-arm/u-boot/Config.in b/target/device/Atmel/arch-arm/u-boot/Config.in
deleted file mode 100644
index 6d32e7867..000000000
--- a/target/device/Atmel/arch-arm/u-boot/Config.in
+++ /dev/null
@@ -1,21 +0,0 @@
-choice
-	prompt "Add AT91 specific patches to u-Boot"
-	default BR2_TARGET_U_BOOT_2009_01_ARCH_AT91
-	help
-	  Select a patch to add to U-Boot
-
-config	BR2_TARGET_U_BOOT_2009_01_ARCH_AT91
-	bool "AT91 patches for u-boot-2009.01"
-	depends on BR2_TARGET_ATMEL && BR2_arm
-	depends on BR2_TARGET_UBOOT_2009_01
-	help
-	  Apply the at91 u-boot-2009.01 patches
-
-endchoice
-
-config	BR2_TARGET_U_BOOT_ARCH_AT91_PATCH_DIR
-	string
-	depends on BR2_TARGET_U_BOOT_ARCH_PATCH
-	default "target/device/Atmel/arch-arm/u-boot/2009.01" if BR2_TARGET_U_BOOT_2009_01_ARCH_AT91
-	default ""
-
diff --git a/target/device/Atmel/arch-arm/u-boot/Makefile.in b/target/device/Atmel/arch-arm/u-boot/Makefile.in
deleted file mode 100644
index b5981e176..000000000
--- a/target/device/Atmel/arch-arm/u-boot/Makefile.in
+++ /dev/null
@@ -1,4 +0,0 @@
-ifneq ($(BR2_TARGET_U_BOOT_ARCH_AT91_PATCH_DIR),)
-U_BOOT_ARCH_PATCH_DIR:=$(call qstrip,$(BR2_TARGET_U_BOOT_ARCH_AT91_PATCH_DIR))
-endif
-
diff --git a/target/device/Config.in.u-boot b/target/device/Config.in.u-boot
deleted file mode 100644
index d67aacfaf..000000000
--- a/target/device/Config.in.u-boot
+++ /dev/null
@@ -1,9 +0,0 @@
-menuconfig BR2_TARGET_U_BOOT_ARCH_PATCH
-	bool "Add architecture specific patch"
-	help
-	  Patch U-Boot for a specific family of chips
-
-if BR2_TARGET_U_BOOT_ARCH_PATCH
-source "target/device/Atmel/arch-arm/u-boot/Config.in"
-endif # BR2_TARGET_U_BOOT_ARCH_PATCH
-