1 files changed, 0 insertions, 290 deletions
diff --git a/target/device/Atmel/arch-avr32/kernel-patches-2.6.22.10/linux-2.6.22.10-501-atmel_mci-minor-fixes-and-cleanups.patch b/target/device/Atmel/arch-avr32/kernel-patches-2.6.22.10/linux-2.6.22.10-501-atmel_mci-minor-fixes-and-cleanups.patch
deleted file mode 100644
index 0c4c1d0af..000000000
--- a/target/device/Atmel/arch-avr32/kernel-patches-2.6.22.10/linux-2.6.22.10-501-atmel_mci-minor-fixes-and-cleanups.patch
+++ /dev/null
@@ -1,290 +0,0 @@
-From: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Subject: [PATCH 1/2] atmel_mci: Minor fixes and cleanups
-
-  * Use ios->clock to define when to enable the controller instead of
-    ios->power_mode.
-  * Send initialization command (74 idle clock cycles) when power_mode
-    is set to MMC_POWER_ON.
-  * Use dev_dbg() and friends instead of pr_debug() and printk().
-  * Don't print data- or probe errors when debugging is not enabled.
-  * Adjust ocr_avail range to 3.2V-3.4V using proper constants.
-
-Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
----
- drivers/mmc/host/atmel-mci.c |  120 ++++++++++++++++++++++-------------------
- 1 files changed, 64 insertions(+), 56 deletions(-)
-
-diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
-index 74d343f..1dc91b4 100644
---- a/drivers/mmc/host/atmel-mci.c
-+++ b/drivers/mmc/host/atmel-mci.c
-@@ -464,9 +464,8 @@ static void atmci_set_timeout(struct atmel_mci *host,
- 		dtocyc = 15;
- 	}
- 
--	pr_debug("%s: setting timeout to %u cycles\n",
--		 mmc_hostname(host->mmc),
--		 dtocyc << dtomul_to_shift[dtomul]);
-+	dev_dbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
-+			dtocyc << dtomul_to_shift[dtomul]);
- 	mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
- 				| MCI_BF(DTOCYC, dtocyc)));
- }
-@@ -508,9 +507,9 @@ static u32 atmci_prepare_command(struct mmc_host *mmc,
- 	if (!(cmd->flags & MMC_RSP_CRC))
- 		iflags &= ~MCI_BIT(RCRCE);
- 
--	pr_debug("%s: cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
--		 mmc_hostname(mmc), cmd->opcode, cmd->arg, cmd->flags,
--		 (unsigned long)cmdr);
-+	dev_dbg(&mmc->class_dev,
-+		"cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
-+		cmd->opcode, cmd->arg, cmd->flags, (unsigned long)cmdr);
- 
- 	*cmd_flags = cmdr;
- 	return iflags;
-@@ -589,7 +588,8 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
- 
- 	iflags = mci_readl(host, IMR);
- 	if (iflags)
--		printk("WARNING: IMR=0x%08x\n", mci_readl(host, IMR));
-+		dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
-+				mci_readl(host, IMR));
- 
- 	WARN_ON(host->mrq != NULL);
- 	host->mrq = mrq;
-@@ -623,16 +623,30 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
- static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
- {
- 	struct atmel_mci *host = mmc_priv(mmc);
-+	u32 mr;
- 
- 	if (ios->clock) {
- 		u32 clkdiv;
- 
-+		/* Set clock rate */
- 		clkdiv = host->bus_hz / (2 * ios->clock) - 1;
--		if (clkdiv > 255)
-+		if (clkdiv > 255) {
-+			dev_warn(&mmc->class_dev,
-+				"clock %u too slow; using %lu\n",
-+				ios->clock, host->bus_hz / (2 * 256));
- 			clkdiv = 255;
--		mci_writel(host, MR, (clkdiv
--				      | MCI_BIT(WRPROOF)
--				      | MCI_BIT(RDPROOF)));
-+		}
-+
-+		mr = mci_readl(host, MR);
-+		mr = MCI_BFINS(CLKDIV, clkdiv, mr)
-+			| MCI_BIT(WRPROOF) | MCI_BIT(RDPROOF);
-+		mci_writel(host, MR, mr);
-+
-+		/* Enable the MCI controller */
-+		mci_writel(host, CR, MCI_BIT(MCIEN));
-+	} else {
-+		/* Disable the MCI controller */
-+		mci_writel(host, CR, MCI_BIT(MCIDIS));
- 	}
- 
- 	switch (ios->bus_width) {
-@@ -645,14 +659,19 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
- 	}
- 
- 	switch (ios->power_mode) {
--	case MMC_POWER_OFF:
--		mci_writel(host, CR, MCI_BIT(MCIDIS));
--		break;
--	case MMC_POWER_UP:
--		mci_writel(host, CR, MCI_BIT(SWRST));
--		break;
- 	case MMC_POWER_ON:
--		mci_writel(host, CR, MCI_BIT(MCIEN));
-+		/* Send init sequence (74 clock cycles) */
-+		mci_writel(host, IDR, ~0UL);
-+		mci_writel(host, CMDR, MCI_BF(SPCMD, MCI_SPCMD_INIT_CMD));
-+		while (!(mci_readl(host, SR) & MCI_BIT(CMDRDY)))
-+			cpu_relax();
-+		break;
-+	default:
-+		/*
-+		 * TODO: None of the currently available AVR32-based
-+		 * boards allow MMC power to be turned off. Implement
-+		 * power control when this can be tested properly.
-+		 */
- 		break;
- 	}
- }
-@@ -664,11 +683,12 @@ static int atmci_get_ro(struct mmc_host *mmc)
- 
- 	if (host->wp_pin >= 0) {
- 		read_only = gpio_get_value(host->wp_pin);
--		pr_debug("%s: card is %s\n", mmc_hostname(mmc),
--			 read_only ? "read-only" : "read-write");
-+		dev_dbg(&mmc->class_dev, "card is %s\n",
-+				read_only ? "read-only" : "read-write");
- 	} else {
--		pr_debug("%s: no pin for checking read-only switch."
--			 " Assuming write-enable.\n", mmc_hostname(mmc));
-+		dev_dbg(&mmc->class_dev,
-+			"no pin for checking read-only switch."
-+			" Assuming write-enable.\n");
- 	}
- 
- 	return read_only;
-@@ -719,8 +739,7 @@ static void atmci_command_error(struct mmc_host *mmc,
- 				struct mmc_command *cmd,
- 				u32 status)
- {
--	pr_debug("%s: command error: status=0x%08x\n",
--		 mmc_hostname(mmc), status);
-+	dev_dbg(&mmc->class_dev, "command error: status=0x%08x\n", status);
- 
- 	if (status & MCI_BIT(RTOE))
- 		cmd->error = MMC_ERR_TIMEOUT;
-@@ -737,7 +756,8 @@ static void atmci_tasklet_func(unsigned long priv)
- 	struct mmc_request *mrq = host->mrq;
- 	struct mmc_data *data = host->data;
- 
--	pr_debug("atmci_tasklet: pending/completed/mask %lx/%lx/%x\n",
-+	dev_dbg(&mmc->class_dev,
-+		"tasklet: pending/completed/mask %lx/%lx/%x\n",
- 		 host->pending_events, host->completed_events,
- 		 mci_readl(host, IMR));
- 
-@@ -784,8 +804,8 @@ static void atmci_tasklet_func(unsigned long priv)
- 		/* DMA controller got bus error => invalid address */
- 		data->error = MMC_ERR_INVALID;
- 
--		printk(KERN_DEBUG "%s: dma error after %u bytes xfered\n",
--		       mmc_hostname(mmc), host->data->bytes_xfered);
-+		dev_dbg(&mmc->class_dev, "dma error after %u bytes xfered\n",
-+				host->data->bytes_xfered);
- 
- 		if (data->stop
- 		    && !mci_set_stop_sent_is_completed(host))
-@@ -803,24 +823,18 @@ static void atmci_tasklet_func(unsigned long priv)
- 		dma_stop_request(host->dma.req.req.dmac,
- 				 host->dma.req.req.channel);
- 
--		printk(KERN_DEBUG "%s: data error: status=0x%08x\n",
--		       mmc_hostname(host->mmc), status);
--
- 		if (status & MCI_BIT(DCRCE)) {
--			printk(KERN_DEBUG "%s: Data CRC error\n",
--			       mmc_hostname(host->mmc));
-+			dev_dbg(&mmc->class_dev, "data CRC error\n");
- 			data->error = MMC_ERR_BADCRC;
- 		} else if (status & MCI_BIT(DTOE)) {
--			printk(KERN_DEBUG "%s: Data Timeout error\n",
--			       mmc_hostname(host->mmc));
-+			dev_dbg(&mmc->class_dev, "data timeout error\n");
- 			data->error = MMC_ERR_TIMEOUT;
- 		} else {
--			printk(KERN_DEBUG "%s: Data FIFO error\n",
--			       mmc_hostname(host->mmc));
-+			dev_dbg(&mmc->class_dev, "data FIFO error\n");
- 			data->error = MMC_ERR_FIFO;
- 		}
--		printk(KERN_DEBUG "%s: Bytes xfered: %u\n",
--		       mmc_hostname(host->mmc), data->bytes_xfered);
-+		dev_dbg(&mmc->class_dev, "bytes xfered: %u\n",
-+				data->bytes_xfered);
- 
- 		if (data->stop
- 		    && !mci_set_stop_sent_is_completed(host))
-@@ -998,8 +1012,8 @@ static irqreturn_t atmci_detect_change(int irq, void *dev_id)
- 	int present = !gpio_get_value(irq_to_gpio(irq));
- 
- 	if (present != host->present) {
--		pr_debug("%s: card %s\n", mmc_hostname(host->mmc),
--			 present ? "inserted" : "removed");
-+		dev_dbg(&mmc->class_dev, "card %s\n",
-+			present ? "inserted" : "removed");
- 		host->present = present;
- 		mci_set_card_detect_pending(host);
- 		tasklet_schedule(&host->tasklet);
-@@ -1058,7 +1072,7 @@ static int __devinit atmci_probe(struct platform_device *pdev)
- 	mmc->ops = &atmci_ops;
- 	mmc->f_min = (host->bus_hz + 511) / 512;
- 	mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
--	mmc->ocr_avail	= 0x00100000;
-+	mmc->ocr_avail	= MMC_VDD_32_33 | MMC_VDD_33_34;
- 	mmc->caps |= MMC_CAP_4_BIT_DATA;
- 
- 	tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
-@@ -1071,8 +1085,7 @@ static int __devinit atmci_probe(struct platform_device *pdev)
- 	host->present = 1;
- 	if (host->detect_pin >= 0) {
- 		if (gpio_request(host->detect_pin, "mmc_detect")) {
--			printk(KERN_WARNING "%s: no detect pin available\n",
--			       mmc_hostname(host->mmc));
-+			dev_dbg(&mmc->class_dev, "no detect pin available\n");
- 			host->detect_pin = -1;
- 		} else {
- 			host->present = !gpio_get_value(host->detect_pin);
-@@ -1080,8 +1093,7 @@ static int __devinit atmci_probe(struct platform_device *pdev)
- 	}
- 	if (host->wp_pin >= 0) {
- 		if (gpio_request(host->wp_pin, "mmc_wp")) {
--			printk(KERN_WARNING "%s: no WP pin available\n",
--			       mmc_hostname(host->mmc));
-+			dev_dbg(&mmc->class_dev, "no WP pin available\n");
- 			host->wp_pin = -1;
- 		}
- 	}
-@@ -1090,14 +1102,12 @@ static int __devinit atmci_probe(struct platform_device *pdev)
- 	ret = -ENOMEM;
- 	host->dma.req.req.dmac = find_dma_controller(0);
- 	if (!host->dma.req.req.dmac) {
--		printk(KERN_ERR
--		       "mmci: No DMA controller available, aborting\n");
-+		dev_dbg(&mmc->class_dev, "no DMA controller available\n");
- 		goto out_free_irq;
- 	}
- 	ret = dma_alloc_channel(host->dma.req.req.dmac);
- 	if (ret < 0) {
--		printk(KERN_ERR
--		       "mmci: Unable to allocate DMA channel, aborting\n");
-+		dev_dbg(&mmc->class_dev, "unable to allocate DMA channel\n");
- 		goto out_free_irq;
- 	}
- 	host->dma.req.req.channel = ret;
-@@ -1110,7 +1120,6 @@ static int __devinit atmci_probe(struct platform_device *pdev)
- 
- 	mci_writel(host, CR, MCI_BIT(SWRST));
- 	mci_writel(host, IDR, ~0UL);
--	mci_writel(host, CR, MCI_BIT(MCIEN));
- 
- 	platform_set_drvdata(pdev, host);
- 
-@@ -1122,17 +1131,16 @@ static int __devinit atmci_probe(struct platform_device *pdev)
- 				  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- 				  DRIVER_NAME, mmc);
- 		if (ret) {
--			printk(KERN_ERR
--			       "%s: could not request IRQ %d for detect pin\n",
--			       mmc_hostname(mmc),
--			       gpio_to_irq(host->detect_pin));
-+			dev_dbg(&mmc->class_dev,
-+				"could not request IRQ %d for detect pin\n",
-+				gpio_to_irq(host->detect_pin));
- 			gpio_free(host->detect_pin);
- 			host->detect_pin = -1;
- 		}
- 	}
- 
--	printk(KERN_INFO "%s: Atmel MCI controller at 0x%08lx irq %d\n",
--	       mmc_hostname(mmc), host->mapbase, irq);
-+	dev_info(&mmc->class_dev, "Atmel MCI controller at 0x%08lx irq %d\n",
-+			host->mapbase, irq);
- 
- 	atmci_init_debugfs(host);
- 
--- 
-1.5.3.2
-
-_______________________________________________
-Kernel mailing list
-Kernel@avr32linux.org
-http://duppen.flaskehals.net/cgi-bin/mailman/listinfo/kernel