diff options
Diffstat (limited to 'target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-100-avr32-atmel.1.patch')
| -rw-r--r-- | target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-100-avr32-atmel.1.patch | 26786 |
1 files changed, 0 insertions, 26786 deletions
diff --git a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-100-avr32-atmel.1.patch b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-100-avr32-atmel.1.patch deleted file mode 100644 index 11bcdae04..000000000 --- a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-100-avr32-atmel.1.patch +++ /dev/null @@ -1,26786 +0,0 @@ -diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h -index dbfd9f7..b2a96fe 100644 ---- a/arch/arm/mach-at91/include/mach/cpu.h -+++ b/arch/arm/mach-at91/include/mach/cpu.h -@@ -99,5 +99,6 @@ static inline unsigned long at91_arch_identify(void) - * definitions may reduce clutter in common drivers. - */ - #define cpu_is_at32ap7000() (0) -+#define cpu_is_at32ap7200() (0) - - #endif -diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig -index 7c239a9..6cef643 100644 ---- a/arch/avr32/Kconfig -+++ b/arch/avr32/Kconfig -@@ -83,6 +83,18 @@ config MMU - config PERFORMANCE_COUNTERS - bool - -+# The old "PIO" portmux/GPIO module used on AT32AP700x -+config PORTMUX_PIO -+ bool -+ -+# The new "GPIO" portmux/GPIO module, version 2 -+config PORTMUX_GPIO_V2 -+ bool -+ -+# Asynchronous Timer clocksource/clockevent driver -+config TIMER_AST -+ bool -+ - config PLATFORM_AT32AP - bool - select SUBARCH_AVR32B -@@ -99,6 +111,7 @@ config PLATFORM_AT32AP - config CPU_AT32AP700X - bool - select PLATFORM_AT32AP -+ select PORTMUX_PIO - config CPU_AT32AP7000 - bool - select CPU_AT32AP700X -@@ -109,6 +122,16 @@ config CPU_AT32AP7002 - bool - select CPU_AT32AP700X - -+# AP7200 derivatives -+config CPU_AT32AP720X -+ bool -+ select PLATFORM_AT32AP -+ select TIMER_AST -+ select PORTMUX_GPIO_V2 -+config CPU_AT32AP7200 -+ bool -+ select CPU_AT32AP720X -+ - choice - prompt "AVR32 board type" - default BOARD_ATSTK1000 -@@ -119,11 +142,19 @@ config BOARD_ATSTK1000 - config BOARD_ATNGW100 - bool "ATNGW100 Network Gateway" - select CPU_AT32AP7000 -+ -+config BOARD_FAVR_32 -+ bool "Favr-32 LCD-board" -+ select CPU_AT32AP7000 -+ -+config BOARD_MIMC200 -+ bool "MIMC200 CPU board" -+ select CPU_AT32AP7000 - endchoice - --if BOARD_ATSTK1000 - source "arch/avr32/boards/atstk1000/Kconfig" --endif -+source "arch/avr32/boards/atngw100/Kconfig" -+source "arch/avr32/boards/favr-32/Kconfig" - - choice - prompt "Boot loader type" -@@ -138,14 +169,17 @@ source "arch/avr32/mach-at32ap/Kconfig" - config LOAD_ADDRESS - hex - default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y -+ default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP720X=y - - config ENTRY_ADDRESS - hex - default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y -+ default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP720X=y - - config PHYS_OFFSET - hex - default 0x10000000 if CPU_AT32AP700X=y -+ default 0x10000000 if CPU_AT32AP720X=y - - source "kernel/Kconfig.preempt" - -diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile -index c9e1f0b..b088e10 100644 ---- a/arch/avr32/Makefile -+++ b/arch/avr32/Makefile -@@ -33,6 +33,8 @@ head-y += arch/avr32/kernel/head.o - core-y += $(machdirs) - core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/ - core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/ -+core-$(CONFIG_BOARD_FAVR_32) += arch/avr32/boards/favr-32/ -+core-$(CONFIG_BOARD_MIMC200) += arch/avr32/boards/mimc200/ - core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/ - core-y += arch/avr32/kernel/ - core-y += arch/avr32/mm/ -diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig -new file mode 100644 -index 0000000..b3f9947 ---- /dev/null -+++ b/arch/avr32/boards/atngw100/Kconfig -@@ -0,0 +1,35 @@ -+# NGW100 customization -+ -+if BOARD_ATNGW100 -+ -+config BOARD_ATNGW100_EVKLCD10X -+ bool "Add support for EVKLCD10X addon board" -+ help -+ This enables support for the EVKLCD100 (QVGA) or EVKLCD101 (VGA) -+ addon board for the NGW100. By enabling this the LCD controller and -+ AC97 controller is added as platform devices. -+ -+ This choice disables the detect pin and the write-protect pin for the -+ MCI platform device, since it conflicts with the LCD platform device. -+ The MCI pins can be reenabled by editing the "add device function" but -+ this may break the setup for other displays that use these pins. -+ -+ Choose 'Y' here if you have a EVKLCD100/101 connected to the NGW100. -+ -+choice -+ prompt "LCD panel resolution on EVKLCD10X" -+ depends on BOARD_ATNGW100_EVKLCD10X -+ default BOARD_ATNGW100_EVKLCD10X_VGA -+ -+config BOARD_ATNGW100_EVKLCD10X_QVGA -+ bool "QVGA (320x240)" -+ -+config BOARD_ATNGW100_EVKLCD10X_VGA -+ bool "VGA (640x480)" -+ -+config BOARD_ATNGW100_EVKLCD10X_POW_QVGA -+ bool "Powertip QVGA (320x240)" -+ -+endchoice -+ -+endif # BOARD_ATNGW100 -diff --git a/arch/avr32/boards/atngw100/Makefile b/arch/avr32/boards/atngw100/Makefile -index c740aa1..6376f53 100644 ---- a/arch/avr32/boards/atngw100/Makefile -+++ b/arch/avr32/boards/atngw100/Makefile -@@ -1 +1,2 @@ --obj-y += setup.o flash.o -+obj-y += setup.o flash.o -+obj-$(CONFIG_BOARD_ATNGW100_EVKLCD10X) += evklcd10x.o -diff --git a/arch/avr32/boards/atngw100/evklcd10x.c b/arch/avr32/boards/atngw100/evklcd10x.c -new file mode 100644 -index 0000000..8140b22 ---- /dev/null -+++ b/arch/avr32/boards/atngw100/evklcd10x.c -@@ -0,0 +1,155 @@ -+/* -+ * Board-specific setup code for the ATEVKLCD10X addon board to the ATNGW100 -+ * Network Gateway -+ * -+ * Copyright (C) 2008 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ */ -+ -+#include <linux/init.h> -+#include <linux/linkage.h> -+#include <linux/fb.h> -+#include <linux/platform_device.h> -+ -+#include <video/atmel_lcdc.h> -+ -+#include <asm/setup.h> -+ -+#include <mach/at32ap700x.h> -+#include <mach/board.h> -+ -+static struct ac97c_platform_data __initdata ac97c0_data = { -+ .dma_rx_periph_id = 3, -+ .dma_tx_periph_id = 4, -+ .dma_controller_id = 0, -+ .reset_pin = GPIO_PIN_PB(19), -+}; -+ -+#ifdef CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA -+static struct fb_videomode __initdata tcg057vglad_modes[] = { -+ { -+ .name = "640x480 @ 60", -+ .refresh = 60, -+ .xres = 640, .yres = 480, -+ .pixclock = KHZ2PICOS(25180), -+ -+ .left_margin = 64, .right_margin = 31, -+ .upper_margin = 34, .lower_margin = 2, -+ .hsync_len = 96, .vsync_len = 4, -+ -+ .sync = 0, -+ .vmode = FB_VMODE_NONINTERLACED, -+ }, -+}; -+ -+static struct fb_monspecs __initdata atevklcd10x_default_monspecs = { -+ .manufacturer = "KYO", -+ .monitor = "TCG057VGLAD", -+ .modedb = tcg057vglad_modes, -+ .modedb_len = ARRAY_SIZE(tcg057vglad_modes), -+ .hfmin = 19948, -+ .hfmax = 31478, -+ .vfmin = 50, -+ .vfmax = 67, -+ .dclkmax = 28330000, -+}; -+ -+static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = { -+ .default_bpp = 16, -+ .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, -+ .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT -+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE -+ | ATMEL_LCDC_MEMOR_BIG), -+ .default_monspecs = &atevklcd10x_default_monspecs, -+ .guard_time = 2, -+}; -+#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA -+static struct fb_videomode __initdata tcg057qvlad_modes[] = { -+ { -+ .name = "320x240 @ 60", -+ .refresh = 60, -+ .xres = 320, .yres = 240, -+ .pixclock = KHZ2PICOS(6300), -+ -+ .left_margin = 52, .right_margin = 28, -+ .upper_margin = 7, .lower_margin = 2, -+ .hsync_len = 96, .vsync_len = 4, -+ -+ .sync = 0, -+ .vmode = FB_VMODE_NONINTERLACED, -+ }, -+}; -+ -+static struct fb_monspecs __initdata atevklcd10x_default_monspecs = { -+ .manufacturer = "KYO", -+ .monitor = "TCG057QVLAD", -+ .modedb = tcg057qvlad_modes, -+ .modedb_len = ARRAY_SIZE(tcg057qvlad_modes), -+ .hfmin = 19948, -+ .hfmax = 31478, -+ .vfmin = 50, -+ .vfmax = 67, -+ .dclkmax = 7000000, -+}; -+ -+static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = { -+ .default_bpp = 16, -+ .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, -+ .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT -+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE -+ | ATMEL_LCDC_MEMOR_BIG), -+ .default_monspecs = &atevklcd10x_default_monspecs, -+ .guard_time = 2, -+}; -+#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA -+static struct fb_videomode __initdata ph320240t_modes[] = { -+ { -+ .name = "320x240 @ 60", -+ .refresh = 60, -+ .xres = 320, .yres = 240, -+ .pixclock = KHZ2PICOS(6300), -+ -+ .left_margin = 38, .right_margin = 20, -+ .upper_margin = 15, .lower_margin = 5, -+ .hsync_len = 30, .vsync_len = 3, -+ -+ .sync = 0, -+ .vmode = FB_VMODE_NONINTERLACED, -+ }, -+}; -+ -+static struct fb_monspecs __initdata atevklcd10x_default_monspecs = { -+ .manufacturer = "POW", -+ .monitor = "PH320240T", -+ .modedb = ph320240t_modes, -+ .modedb_len = ARRAY_SIZE(ph320240t_modes), -+ .hfmin = 14400, -+ .hfmax = 21600, -+ .vfmin = 50, -+ .vfmax = 90, -+ .dclkmax = 6400000, -+}; -+ -+static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = { -+ .default_bpp = 16, -+ .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, -+ .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT -+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE -+ | ATMEL_LCDC_MEMOR_BIG), -+ .default_monspecs = &atevklcd10x_default_monspecs, -+ .guard_time = 2, -+}; -+#endif -+ -+static int __init atevklcd10x_init(void) -+{ -+ at32_add_device_ac97c(0, &ac97c0_data); -+ -+ at32_add_device_lcdc(0, &atevklcd10x_lcdc_data, -+ fbmem_start, fbmem_size, 1); -+ return 0; -+} -+postcore_initcall(atevklcd10x_init); -diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c -index b8286f1..32fb9ba 100644 ---- a/arch/avr32/boards/atngw100/setup.c -+++ b/arch/avr32/boards/atngw100/setup.c -@@ -9,6 +9,7 @@ - */ - #include <linux/clk.h> - #include <linux/etherdevice.h> -+#include <linux/gpio.h> - #include <linux/irq.h> - #include <linux/i2c.h> - #include <linux/i2c-gpio.h> -@@ -53,8 +54,16 @@ static struct spi_board_info spi0_board_info[] __initdata = { - }; - - static struct mci_platform_data __initdata mci0_data = { -- .detect_pin = GPIO_PIN_PC(25), -- .wp_pin = GPIO_PIN_PE(0), -+ .slot[0] = { -+ .bus_width = 4, -+#ifndef CONFIG_BOARD_ATNGW100_EVKLCD10X -+ .detect_pin = GPIO_PIN_PC(25), -+ .wp_pin = GPIO_PIN_PE(0), -+#else -+ .detect_pin = GPIO_PIN_NONE, -+ .wp_pin = GPIO_PIN_NONE, -+#endif -+ }, - }; - - /* -@@ -168,8 +177,6 @@ static int __init atngw100_init(void) - * reserve any pins for it. - */ - -- at32_add_system_devices(); -- - at32_add_device_usart(0); - - set_hw_addr(at32_add_device_eth(0, ð_data[0])); -@@ -190,7 +197,7 @@ static int __init atngw100_init(void) - * PB28/EXTINT3 doesn't; it should be SMBALERT# (for PMBus), - * but it's not available off-board. - */ -- at32_select_periph(GPIO_PIN_PB(28), 0, AT32_GPIOF_PULLUP); -+ at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP); - at32_select_gpio(i2c_gpio_data.sda_pin, - AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); - at32_select_gpio(i2c_gpio_data.scl_pin, -@@ -204,6 +211,15 @@ postcore_initcall(atngw100_init); - - static int __init atngw100_arch_init(void) - { -+ /* PB30 is the otherwise unused jumper on the mainboard, with an -+ * external pullup; the jumper grounds it. Use it however you -+ * like, including letting U-Boot or Linux tweak boot sequences. -+ */ -+ at32_select_gpio(GPIO_PIN_PB(30), 0); -+ gpio_request(GPIO_PIN_PB(30), "j15"); -+ gpio_direction_input(GPIO_PIN_PB(30)); -+ gpio_export(GPIO_PIN_PB(30), false); -+ - /* set_irq_type() after the arch_initcall for EIC has run, and - * before the I2C subsystem could try using this IRQ. - */ -diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig -index 8dc4821..0884884 100644 ---- a/arch/avr32/boards/atstk1000/Kconfig -+++ b/arch/avr32/boards/atstk1000/Kconfig -@@ -18,6 +18,10 @@ config BOARD_ATSTK1004 - bool "ATSTK1004" - select CPU_AT32AP7002 - -+config BOARD_ATSTK1005 -+ bool "ATSTK1005" -+ select CPU_AT32AP7200 -+ - config BOARD_ATSTK1006 - bool "ATSTK1006" - select CPU_AT32AP7000 -diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile -index edecee0..d0f248d 100644 ---- a/arch/avr32/boards/atstk1000/Makefile -+++ b/arch/avr32/boards/atstk1000/Makefile -@@ -2,4 +2,5 @@ obj-y += setup.o flash.o - obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o - obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o - obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o -+obj-$(CONFIG_BOARD_ATSTK1005) += atstk1005.o - obj-$(CONFIG_BOARD_ATSTK1006) += atstk1002.o -diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c -index dfc3443..11e7800 100644 ---- a/arch/avr32/boards/atstk1000/atstk1002.c -+++ b/arch/avr32/boards/atstk1000/atstk1002.c -@@ -232,7 +232,7 @@ static void __init atstk1002_setup_extdac(void) - goto err_set_clk; - } - -- at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); -+ at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0); - at73c213_data.dac_clk = gclk; - - err_set_clk: -@@ -264,16 +264,20 @@ void __init setup_board(void) - - #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - -+static struct mci_platform_data __initdata mci0_data = { -+ .slot[0] = { -+ .bus_width = 4, -+ - /* MMC card detect requires MACB0 *NOT* be used */ - #ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM --static struct mci_platform_data __initdata mci0_data = { -- .detect_pin = GPIO_PIN_PC(14), /* gpio30/sdcd */ -- .wp_pin = GPIO_PIN_PC(15), /* gpio31/sdwp */ --}; --#define MCI_PDATA &mci0_data -+ .detect_pin = GPIO_PIN_PC(14), /* gpio30/sdcd */ -+ .wp_pin = GPIO_PIN_PC(15), /* gpio31/sdwp */ - #else --#define MCI_PDATA NULL -+ .detect_pin = -ENODEV, -+ .wp_pin = -ENODEV, - #endif /* SW6 for sd{cd,wp} routing */ -+ }, -+}; - - #endif /* SW2 for MMC signal routing */ - -@@ -283,25 +287,7 @@ static int __init atstk1002_init(void) - * ATSTK1000 uses 32-bit SDRAM interface. Reserve the - * SDRAM-specific pins so that nobody messes with them. - */ -- at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */ -- at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */ -- at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */ -- at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */ -- at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */ -- at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */ -- at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */ -- at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */ -- at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */ -- at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */ -- at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */ -- at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */ -- at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */ -- at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */ -- at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */ -- at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */ -- at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */ -- -- at32_add_system_devices(); -+ at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL); - - #ifdef CONFIG_BOARD_ATSTK1006 - smc_set_timing(&nand_config, &nand_timing); -@@ -326,13 +312,14 @@ static int __init atstk1002_init(void) - at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); - #endif - #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM -- at32_add_device_mci(0, MCI_PDATA); -+ at32_add_device_mci(0, &mci0_data); - #endif - #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM - set_hw_addr(at32_add_device_eth(1, ð_data[1])); - #else - at32_add_device_lcdc(0, &atstk1000_lcdc_data, -- fbmem_start, fbmem_size, 0); -+ fbmem_start, fbmem_size, -+ ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL); - #endif - at32_add_device_usba(0, NULL); - #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM -diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c -index 0cf6641..ac31666 100644 ---- a/arch/avr32/boards/atstk1000/atstk1003.c -+++ b/arch/avr32/boards/atstk1000/atstk1003.c -@@ -19,6 +19,7 @@ - #include <linux/spi/spi.h> - - #include <asm/setup.h> -+#include <asm/atmel-mci.h> - - #include <mach/at32ap700x.h> - #include <mach/board.h> -@@ -66,6 +67,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { { - } }; - #endif - -+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM -+static struct mci_platform_data __initdata mci0_data = { -+ .slot[0] = { -+ .bus_width = 4, -+ .detect_pin = -ENODEV, -+ .wp_pin = -ENODEV, -+ }, -+}; -+#endif -+ - #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC - static void __init atstk1003_setup_extdac(void) - { -@@ -84,7 +95,7 @@ static void __init atstk1003_setup_extdac(void) - goto err_set_clk; - } - -- at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); -+ at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0); - at73c213_data.dac_clk = gclk; - - err_set_clk: -@@ -120,25 +131,7 @@ static int __init atstk1003_init(void) - * ATSTK1000 uses 32-bit SDRAM interface. Reserve the - * SDRAM-specific pins so that nobody messes with them. - */ -- at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */ -- at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */ -- at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */ -- at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */ -- at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */ -- at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */ -- at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */ -- at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */ -- at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */ -- at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */ -- at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */ -- at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */ -- at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */ -- at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */ -- at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */ -- at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */ -- at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */ -- -- at32_add_system_devices(); -+ at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL); - - #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_add_device_usart(1); -@@ -154,7 +147,7 @@ static int __init atstk1003_init(void) - at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); - #endif - #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM -- at32_add_device_mci(0, NULL); -+ at32_add_device_mci(0, &mci0_data); - #endif - at32_add_device_usba(0, NULL); - #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM -diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c -index 50a5273..cb32eb8 100644 ---- a/arch/avr32/boards/atstk1000/atstk1004.c -+++ b/arch/avr32/boards/atstk1000/atstk1004.c -@@ -21,6 +21,7 @@ - #include <video/atmel_lcdc.h> - - #include <asm/setup.h> -+#include <asm/atmel-mci.h> - - #include <mach/at32ap700x.h> - #include <mach/board.h> -@@ -71,6 +72,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { { - } }; - #endif - -+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM -+static struct mci_platform_data __initdata mci0_data = { -+ .slot[0] = { -+ .bus_width = 4, -+ .detect_pin = -ENODEV, -+ .wp_pin = -ENODEV, -+ }, -+}; -+#endif -+ - #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC - static void __init atstk1004_setup_extdac(void) - { -@@ -89,7 +100,7 @@ static void __init atstk1004_setup_extdac(void) - goto err_set_clk; - } - -- at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); -+ at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0); - at73c213_data.dac_clk = gclk; - - err_set_clk: -@@ -121,8 +132,6 @@ void __init setup_board(void) - - static int __init atstk1004_init(void) - { -- at32_add_system_devices(); -- - #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_add_device_usart(1); - #else -@@ -137,10 +146,11 @@ static int __init atstk1004_init(void) - at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); - #endif - #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM -- at32_add_device_mci(0, NULL); -+ at32_add_device_mci(0, &mci0_data); - #endif - at32_add_device_lcdc(0, &atstk1000_lcdc_data, -- fbmem_start, fbmem_size, 0); -+ fbmem_start, fbmem_size, -+ ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL); - at32_add_device_usba(0, NULL); - #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM - at32_add_device_ssc(0, ATMEL_SSC_TX); -diff --git a/arch/avr32/boards/atstk1000/atstk1005.c b/arch/avr32/boards/atstk1000/atstk1005.c -new file mode 100644 -index 0000000..f5a9baa ---- /dev/null -+++ b/arch/avr32/boards/atstk1000/atstk1005.c -@@ -0,0 +1,225 @@ -+/* -+ * ATSTK1005 daughterboard-specific init code -+ * -+ * Copyright (C) 2005-2006 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include <linux/device.h> -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/list.h> -+#include <linux/string.h> -+#include <linux/mtd/partitions.h> -+#include <linux/spi/spi.h> -+ -+#include <asm/atmel-mci.h> -+#include <asm/setup.h> -+ -+#include <mach/at32ap720x.h> -+#include <mach/board.h> -+#include <mach/init.h> -+#include <mach/portmux.h> -+#include <mach/smc.h> -+ -+#include "atstk1000.h" -+ -+/* Oscillator frequencies. These are board specific */ -+unsigned long at32_board_osc_rates[4] = { -+ [0] = 20000000, /* 20 MHz on osc0 */ -+ [1] = 0, /* Nothing on osc1 */ -+ [2] = 12000000, /* 12 MHz on osc2 */ -+ [3] = 32768, /* 32.768 kHz on RTC osc */ -+}; -+ -+struct eth_addr { -+ u8 addr[6]; -+}; -+ -+static struct eth_addr __initdata hw_addr; -+static struct eth_platform_data __initdata eth_data; -+ -+static struct mci_platform_data mci_data __initdata = { -+ .slot[0] = { -+ .detect_pin = GPIO_PIN_NONE, -+ .wp_pin = GPIO_PIN_NONE, -+ .bus_width = 4, -+ }, -+ .slot[1] = { -+ .detect_pin = GPIO_PIN_PA(30), -+ .wp_pin = GPIO_PIN_PA(31), -+ .bus_width = 8, -+ }, -+}; -+ -+static struct spi_board_info spi0_board_info[] __initdata = { -+ { -+ /* AT45DB642D: 8MB DataFlash */ -+ .modalias = "mtd_dataflash", -+ .max_speed_hz = 8000000, -+ .chip_select = 0, -+ .mode = SPI_MODE_0, -+ }, { -+ /* QVGA display */ -+ .modalias = "ltv350qv", -+ .max_speed_hz = 8000000, -+ .chip_select = 2, -+ .mode = SPI_MODE_3, -+ }, -+}; -+ -+static struct smc_timing nand_timing __initdata = { -+ .ncs_read_setup = 0, -+ .nrd_setup = 10, -+ .ncs_write_setup = 0, -+ .nwe_setup = 10, -+ -+ .ncs_read_pulse = 30, -+ .nrd_pulse = 15, -+ .ncs_write_pulse = 30, -+ .nwe_pulse = 15, -+ -+ .read_cycle = 30, -+ .write_cycle = 30, -+ -+ .ncs_read_recover = 0, -+ .nrd_recover = 15, -+ .ncs_write_recover = 0, -+ .nwe_recover = 50, -+}; -+ -+static struct smc_config nand_config __initdata = { -+ .bus_width = 1, -+ .nrd_controlled = 1, -+ .nwe_controlled = 1, -+ .nwait_mode = 0, -+ .byte_write = 0, -+ .tdf_cycles = 3, -+ .tdf_mode = 0, -+}; -+ -+static struct mtd_partition nand_partitions[] = { -+ { -+ .name = "u-boot", -+ .offset = 0, -+ .size = 131072, -+ }, { -+ .name = "kernel", -+ .offset = 262144, -+ .size = 2097152, -+ }, { -+ .name = "user", -+ .offset = 2359296, -+ .size = MTDPART_SIZ_FULL, -+ }, -+}; -+ -+/* Isn't this rather more complicated than necessary? */ -+static struct mtd_partition *nand_part_info(int size, int *num_partitions) -+{ -+ *num_partitions = ARRAY_SIZE(nand_partitions); -+ return nand_partitions; -+} -+ -+static struct atmel_nand_data nand_data __initdata = { -+ .cle = 21, -+ .ale = 22, -+ .rdy_pin = GPIO_PIN_PE(31), -+ .enable_pin = GPIO_PIN_PF(2), -+ .det_pin = GPIO_PIN_NONE, -+ .partition_info = nand_part_info, -+}; -+ -+ -+/* -+ * Grab ethernet address and PHY address provided by the boot loader. -+ */ -+static int __init parse_tag_ethernet(struct tag *tag) -+{ -+ struct tag_ethernet *etag = &tag->u.ethernet; -+ -+ if (etag->mac_index == 0) { -+ eth_data.phy_mask = ~(1U << etag->mii_phy_addr); -+ memcpy(&hw_addr.addr, etag->hw_address, sizeof(hw_addr.addr)); -+ } -+ -+ return 0; -+} -+__tagtable(ATAG_ETHERNET, parse_tag_ethernet); -+ -+/* -+ * We need to get rid of this crap and pass the mac address to the -+ * driver explicitly. -+ */ -+#include <linux/clk.h> -+#include <linux/etherdevice.h> -+#include <linux/io.h> -+#include <linux/ioport.h> -+#include <linux/platform_device.h> -+static void __init set_hw_addr(struct platform_device *pdev) -+{ -+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ const u8 *addr; -+ void __iomem *regs; -+ struct clk *pclk; -+ -+ if (!res) -+ return; -+ if (pdev->id != 0) -+ return; -+ -+ addr = hw_addr.addr; -+ if (!is_valid_ether_addr(addr)) -+ return; -+ -+ /* -+ * Since this is board-specific code, we'll cheat and use the -+ * physical address directly as we happen to know that it's -+ * the same as the virtual address. -+ */ -+ regs = (void __iomem __force *)res->start; -+ pclk = clk_get(&pdev->dev, "pclk"); -+ if (!pclk) -+ return; -+ -+ clk_enable(pclk); -+ __raw_writel((addr[3] << 24) | (addr[2] << 16) -+ | (addr[1] << 8) | addr[0], regs + 0x98); -+ __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c); -+ clk_disable(pclk); -+ clk_put(pclk); -+} -+ -+void __init setup_board(void) -+{ -+ at32_map_usart(4, 0); /* USART4: /dev/ttyS0, DB9 */ -+ at32_setup_serial_console(0); -+} -+ -+static int __init atstk1005_init(void) -+{ -+ struct platform_device *lcdc_pdev; -+ -+ at32_add_device_usart(0); -+ -+ set_hw_addr(at32_add_device_eth(0, ð_data)); -+ lcdc_pdev = at32_add_device_lcdc(0, &atstk1000_lcdc_data, -+ fbmem_start, fbmem_size, 0); -+ at32_add_device_mpop(0, lcdc_pdev, fbmem_start, fbmem_size); -+ at32_add_device_mci(0, &mci_data); -+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); -+ -+ /* NAND Flash */ -+ smc_set_timing(&nand_config, &nand_timing); -+ smc_set_configuration(3, &nand_config); -+ at32_add_device_nand(0, &nand_data); -+ -+ /* USB OHCI/EHCI host */ -+ at32_add_device_ohci(0); -+ at32_add_device_ehci(0); -+ -+ return 0; -+} -+postcore_initcall(atstk1005_init); -diff --git a/arch/avr32/boards/favr-32/Kconfig b/arch/avr32/boards/favr-32/Kconfig -new file mode 100644 -index 0000000..2c83d1d ---- /dev/null -+++ b/arch/avr32/boards/favr-32/Kconfig -@@ -0,0 +1,22 @@ -+# Favr-32 customization -+ -+if BOARD_FAVR_32 -+ -+config BOARD_FAVR32_ABDAC_RATE -+ int "DAC target rate" -+ default 44100 -+ range 32000 50000 -+ help -+ Specify the target rate the internal DAC should try to match. This -+ will use PLL1 to generate a frequency as close as possible to this -+ rate. -+ -+ Must be within the range 32000 to 50000, which should be suitable to -+ generate most other frequencies in power of 2 steps. -+ -+ Ex: -+ 48000 will also suit 24000 and 12000 -+ 44100 will also suit 22050 and 11025 -+ 32000 will also suit 16000 and 8000 -+ -+endif # BOARD_FAVR_32 -diff --git a/arch/avr32/boards/favr-32/Makefile b/arch/avr32/boards/favr-32/Makefile -new file mode 100644 -index 0000000..234f215 ---- /dev/null -+++ b/arch/avr32/boards/favr-32/Makefile -@@ -0,0 +1 @@ -+obj-y += setup.o flash.o -diff --git a/arch/avr32/boards/favr-32/flash.c b/arch/avr32/boards/favr-32/flash.c -new file mode 100644 -index 0000000..604bbd5 ---- /dev/null -+++ b/arch/avr32/boards/favr-32/flash.c -@@ -0,0 +1,98 @@ -+/* -+ * Favr-32 board-specific flash initialization -+ * -+ * Copyright (C) 2008 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+#include <linux/mtd/physmap.h> -+ -+#include <mach/smc.h> -+ -+static struct smc_timing flash_timing __initdata = { -+ .ncs_read_setup = 0, -+ .nrd_setup = 40, -+ .ncs_write_setup = 0, -+ .nwe_setup = 10, -+ -+ .ncs_read_pulse = 80, -+ .nrd_pulse = 40, -+ .ncs_write_pulse = 65, -+ .nwe_pulse = 55, -+ -+ .read_cycle = 120, -+ .write_cycle = 120, -+}; -+ -+static struct smc_config flash_config __initdata = { -+ .bus_width = 2, -+ .nrd_controlled = 1, -+ .nwe_controlled = 1, -+ .byte_write = 1, -+}; -+ -+static struct mtd_partition flash_parts[] = { -+ { -+ .name = "u-boot", -+ .offset = 0x00000000, -+ .size = 0x00020000, /* 128 KiB */ -+ .mask_flags = MTD_WRITEABLE, -+ }, -+ { -+ .name = "root", -+ .offset = 0x00020000, -+ .size = 0x007d0000, -+ }, -+ { -+ .name = "env", -+ .offset = 0x007f0000, -+ .size = 0x00010000, -+ .mask_flags = MTD_WRITEABLE, -+ }, -+}; -+ -+static struct physmap_flash_data flash_data = { -+ .width = 2, -+ .nr_parts = ARRAY_SIZE(flash_parts), -+ .parts = flash_parts, -+}; -+ -+static struct resource flash_resource = { -+ .start = 0x00000000, -+ .end = 0x007fffff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device flash_device = { -+ .name = "physmap-flash", -+ .id = 0, -+ .resource = &flash_resource, -+ .num_resources = 1, -+ .dev = { -+ .platform_data = &flash_data, -+ }, -+}; -+ -+/* This needs to be called after the SMC has been initialized */ -+static int __init favr32_flash_init(void) -+{ -+ int ret; -+ -+ smc_set_timing(&flash_config, &flash_timing); -+ ret = smc_set_configuration(0, &flash_config); -+ if (ret < 0) { -+ printk(KERN_ERR "Favr-32: failed to set NOR flash timing\n"); -+ return ret; -+ } -+ -+ platform_device_register(&flash_device); -+ -+ return 0; -+} -+device_initcall(favr32_flash_init); -diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c -new file mode 100644 -index 0000000..1a12930 ---- /dev/null -+++ b/arch/avr32/boards/favr-32/setup.c -@@ -0,0 +1,334 @@ -+/* -+ * Favr-32 board-specific setup code. -+ * -+ * Copyright (C) 2008 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include <linux/clk.h> -+#include <linux/etherdevice.h> -+#include <linux/bootmem.h> -+#include <linux/fb.h> -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/types.h> -+#include <linux/linkage.h> -+#include <linux/gpio.h> -+#include <linux/leds.h> -+#include <linux/atmel-pwm-bl.h> -+#include <linux/spi/spi.h> -+#include <linux/spi/ads7846.h> -+ -+#include <video/atmel_lcdc.h> -+ -+#include <asm/setup.h> -+ -+#include <mach/at32ap700x.h> -+#include <mach/init.h> -+#include <mach/board.h> -+#include <mach/portmux.h> -+ -+/* Oscillator frequencies. These are board-specific */ -+unsigned long at32_board_osc_rates[3] = { -+ [0] = 32768, /* 32.768 kHz on RTC osc */ -+ [1] = 20000000, /* 20 MHz on osc0 */ -+ [2] = 12000000, /* 12 MHz on osc1 */ -+}; -+ -+/* Initialized by bootloader-specific startup code. */ -+struct tag *bootloader_tags __initdata; -+ -+struct eth_addr { -+ u8 addr[6]; -+}; -+static struct eth_addr __initdata hw_addr[1]; -+static struct eth_platform_data __initdata eth_data[1] = { -+ { -+ .phy_mask = ~(1U << 1), -+ }, -+}; -+ -+static int ads7843_get_pendown_state(void) -+{ -+ return !gpio_get_value(GPIO_PIN_PB(3)); -+} -+ -+static struct ads7846_platform_data ads7843_data = { -+ .model = 7843, -+ .get_pendown_state = ads7843_get_pendown_state, -+ .pressure_max = 255, -+ /* -+ * Values below are for debounce filtering, these can be experimented -+ * with further. -+ */ -+ .debounce_max = 20, -+ .debounce_rep = 4, -+ .debounce_tol = 5, -+}; -+ -+static struct spi_board_info __initdata spi1_board_info[] = { -+ { -+ /* ADS7843 touch controller */ -+ .modalias = "ads7846", -+ .max_speed_hz = 2000000, -+ .chip_select = 0, -+ .bus_num = 1, -+ .platform_data = &ads7843_data, -+ }, -+}; -+ -+static struct fb_videomode __initdata lb104v03_modes[] = { -+ { -+ .name = "640x480 @ 50", -+ .refresh = 50, -+ .xres = 640, .yres = 480, -+ .pixclock = KHZ2PICOS(25100), -+ -+ .left_margin = 90, .right_margin = 70, -+ .upper_margin = 30, .lower_margin = 15, -+ .hsync_len = 12, .vsync_len = 2, -+ -+ .sync = 0, -+ .vmode = FB_VMODE_NONINTERLACED, -+ }, -+}; -+ -+static struct fb_monspecs __initdata favr32_default_monspecs = { -+ .manufacturer = "LG", -+ .monitor = "LB104V03", -+ .modedb = lb104v03_modes, -+ .modedb_len = ARRAY_SIZE(lb104v03_modes), -+ .hfmin = 27273, -+ .hfmax = 31111, -+ .vfmin = 45, -+ .vfmax = 60, -+ .dclkmax = 28000000, -+}; -+ -+struct atmel_lcdfb_info __initdata favr32_lcdc_data = { -+ .default_bpp = 16, -+ .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, -+ .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT -+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE -+ | ATMEL_LCDC_MEMOR_BIG), -+ .default_monspecs = &favr32_default_monspecs, -+ .guard_time = 2, -+}; -+ -+static struct gpio_led favr32_leds[] = { -+ { -+ .name = "green", -+ .gpio = GPIO_PIN_PE(19), -+ .default_trigger = "heartbeat", -+ .active_low = 1, -+ }, -+ { -+ .name = "red", -+ .gpio = GPIO_PIN_PE(20), -+ .active_low = 1, -+ }, -+}; -+ -+static struct gpio_led_platform_data favr32_led_data = { -+ .num_leds = ARRAY_SIZE(favr32_leds), -+ .leds = favr32_leds, -+}; -+ -+static struct platform_device favr32_led_dev = { -+ .name = "leds-gpio", -+ .id = 0, -+ .dev = { -+ .platform_data = &favr32_led_data, -+ }, -+}; -+ -+/* -+ * The next two functions should go away as the boot loader is -+ * supposed to initialize the macb address registers with a valid -+ * ethernet address. But we need to keep it around for a while until -+ * we can be reasonably sure the boot loader does this. -+ * -+ * The phy_id is ignored as the driver will probe for it. -+ */ -+static int __init parse_tag_ethernet(struct tag *tag) -+{ -+ int i; -+ -+ i = tag->u.ethernet.mac_index; -+ if (i < ARRAY_SIZE(hw_addr)) -+ memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address, -+ sizeof(hw_addr[i].addr)); -+ -+ return 0; -+} -+__tagtable(ATAG_ETHERNET, parse_tag_ethernet); -+ -+static void __init set_hw_addr(struct platform_device *pdev) -+{ -+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ const u8 *addr; -+ void __iomem *regs; -+ struct clk *pclk; -+ -+ if (!res) -+ return; -+ if (pdev->id >= ARRAY_SIZE(hw_addr)) -+ return; -+ -+ addr = hw_addr[pdev->id].addr; -+ if (!is_valid_ether_addr(addr)) -+ return; -+ -+ /* -+ * Since this is board-specific code, we'll cheat and use the -+ * physical address directly as we happen to know that it's -+ * the same as the virtual address. -+ */ -+ regs = (void __iomem __force *)res->start; -+ pclk = clk_get(&pdev->dev, "pclk"); -+ if (!pclk) -+ return; -+ -+ clk_enable(pclk); -+ __raw_writel((addr[3] << 24) | (addr[2] << 16) -+ | (addr[1] << 8) | addr[0], regs + 0x98); -+ __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c); -+ clk_disable(pclk); -+ clk_put(pclk); -+} -+ -+void __init favr32_setup_leds(void) -+{ -+ unsigned i; -+ -+ for (i = 0; i < ARRAY_SIZE(favr32_leds); i++) -+ at32_select_gpio(favr32_leds[i].gpio, AT32_GPIOF_OUTPUT); -+ -+ platform_device_register(&favr32_led_dev); -+} -+ -+static struct atmel_pwm_bl_platform_data atmel_pwm_bl_pdata = { -+ .pwm_channel = 2, -+ .pwm_frequency = 200000, -+ .pwm_compare_max = 345, -+ .pwm_duty_max = 345, -+ .pwm_duty_min = 90, -+ .pwm_active_low = 1, -+ .gpio_on = GPIO_PIN_PA(28), -+ .on_active_low = 0, -+}; -+ -+static struct platform_device atmel_pwm_bl_dev = { -+ .name = "atmel-pwm-bl", -+ .id = 0, -+ .dev = { -+ .platform_data = &atmel_pwm_bl_pdata, -+ }, -+}; -+ -+static void __init favr32_setup_atmel_pwm_bl(void) -+{ -+ platform_device_register(&atmel_pwm_bl_dev); -+ at32_select_gpio(atmel_pwm_bl_pdata.gpio_on, 0); -+} -+ -+void __init setup_board(void) -+{ -+ at32_map_usart(3, 0); /* USART 3 => /dev/ttyS0 */ -+ at32_setup_serial_console(0); -+} -+ -+static int __init set_abdac_rate(struct platform_device *pdev) -+{ -+ int retval; -+ struct clk *osc1; -+ struct clk *pll1; -+ struct clk *abdac; -+ -+ if (pdev == NULL) -+ return -ENXIO; -+ -+ osc1 = clk_get(NULL, "osc1"); -+ if (IS_ERR(osc1)) { -+ retval = PTR_ERR(osc1); -+ goto out; -+ } -+ -+ pll1 = clk_get(NULL, "pll1"); -+ if (IS_ERR(pll1)) { -+ retval = PTR_ERR(pll1); -+ goto out_osc1; -+ } -+ -+ abdac = clk_get(&pdev->dev, "sample_clk"); -+ if (IS_ERR(abdac)) { -+ retval = PTR_ERR(abdac); -+ goto out_pll1; -+ } -+ -+ retval = clk_set_parent(pll1, osc1); -+ if (retval != 0) -+ goto out_abdac; -+ -+ /* -+ * Rate is 32000 to 50000 and ABDAC oversamples 256x. Multiply, in -+ * power of 2, to a value above 80 MHz. Power of 2 so it is possible -+ * for the generic clock to divide it down again and 80 MHz is the -+ * lowest frequency for the PLL. -+ */ -+ retval = clk_round_rate(pll1, -+ CONFIG_BOARD_FAVR32_ABDAC_RATE * 256 * 16); -+ if (retval < 0) -+ goto out_abdac; -+ -+ retval = clk_set_rate(pll1, retval); -+ if (retval != 0) -+ goto out_abdac; -+ -+ retval = clk_set_parent(abdac, pll1); -+ if (retval != 0) -+ goto out_abdac; -+ -+out_abdac: -+ clk_put(abdac); -+out_pll1: -+ clk_put(pll1); -+out_osc1: -+ clk_put(osc1); -+out: -+ return retval; -+} -+ -+static int __init favr32_init(void) -+{ -+ /* -+ * Favr-32 uses 32-bit SDRAM interface. Reserve the SDRAM-specific -+ * pins so that nobody messes with them. -+ */ -+ at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL); -+ -+ at32_select_gpio(GPIO_PIN_PB(3), 0); /* IRQ from ADS7843 */ -+ -+ at32_add_device_usart(0); -+ -+ set_hw_addr(at32_add_device_eth(0, ð_data[0])); -+ -+ spi1_board_info[0].irq = gpio_to_irq(GPIO_PIN_PB(3)); -+ -+ set_abdac_rate(at32_add_device_abdac(0)); -+ -+ at32_add_device_pwm(1 << atmel_pwm_bl_pdata.pwm_channel); -+ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); -+ at32_add_device_mci(0, NULL); -+ at32_add_device_usba(0, NULL); -+ at32_add_device_lcdc(0, &favr32_lcdc_data, fbmem_start, fbmem_size, 0); -+ -+ favr32_setup_leds(); -+ -+ favr32_setup_atmel_pwm_bl(); -+ -+ return 0; -+} -+postcore_initcall(favr32_init); -diff --git a/arch/avr32/boards/mimc200/Makefile b/arch/avr32/boards/mimc200/Makefile -new file mode 100644 -index 0000000..79c076e ---- /dev/null -+++ b/arch/avr32/boards/mimc200/Makefile -@@ -0,0 +1 @@ -+obj-y += setup.o flash.o fram.o -diff --git a/arch/avr32/boards/mimc200/flash.c b/arch/avr32/boards/mimc200/flash.c -new file mode 100644 -index 0000000..d83d650 ---- /dev/null -+++ b/arch/avr32/boards/mimc200/flash.c -@@ -0,0 +1,143 @@ -+/* -+ * MIMC200 board-specific flash initialization -+ * -+ * Copyright (C) 2008 Mercury IMC Ltd -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+#include <linux/mtd/physmap.h> -+ -+#include <mach/smc.h> -+ -+static struct smc_timing flash_timing __initdata = { -+ .ncs_read_setup = 0, -+ .nrd_setup = 15, -+ .ncs_write_setup = 0, -+ .nwe_setup = 0, -+ -+ .ncs_read_pulse = 115, -+ .nrd_pulse = 110, -+ .ncs_write_pulse = 60, -+ .nwe_pulse = 60, -+ -+ .read_cycle = 115, -+ .write_cycle = 100, -+}; -+ -+static struct smc_config flash_config __initdata = { -+ .bus_width = 2, -+ .nrd_controlled = 1, -+ .nwe_controlled = 1, -+ .byte_write = 1, -+}; -+ -+/* system flash definition */ -+ -+static struct mtd_partition flash_parts_system[] = { -+ { -+ .name = "u-boot", -+ .offset = 0x00000000, -+ .size = 0x00020000, /* 128 KiB */ -+ .mask_flags = MTD_WRITEABLE, -+ }, -+ { -+ .name = "root", -+ .offset = 0x00020000, -+ .size = 0x007c0000, -+ }, -+ { -+ .name = "splash", -+ .offset = 0x007e0000, -+ .size = 0x00010000, /* 64KiB */ -+ }, -+ { -+ .name = "env", -+ .offset = 0x007f0000, -+ .size = 0x00010000, -+ .mask_flags = MTD_WRITEABLE, -+ }, -+}; -+ -+static struct physmap_flash_data flash_system = { -+ .width = 2, -+ .nr_parts = ARRAY_SIZE(flash_parts_system), -+ .parts = flash_parts_system, -+}; -+ -+static struct resource flash_resource_system = { -+ .start = 0x00000000, -+ .end = 0x007fffff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device flash_device_system = { -+ .name = "physmap-flash", -+ .id = 0, -+ .resource = &flash_resource_system, -+ .num_resources = 1, -+ .dev = { -+ .platform_data = &flash_system, -+ }, -+}; -+ -+/* data flash definition */ -+ -+static struct mtd_partition flash_parts_data[] = { -+ { -+ .name = "data", -+ .offset = 0x00000000, -+ .size = 0x00800000, -+ }, -+}; -+ -+static struct physmap_flash_data flash_data = { -+ .width = 2, -+ .nr_parts = ARRAY_SIZE(flash_parts_data), -+ .parts = flash_parts_data, -+}; -+ -+static struct resource flash_resource_data = { -+ .start = 0x08000000, -+ .end = 0x087fffff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device flash_device_data = { -+ .name = "physmap-flash", -+ .id = 1, -+ .resource = &flash_resource_data, -+ .num_resources = 1, -+ .dev = { -+ .platform_data = &flash_data, -+ }, -+}; -+ -+/* This needs to be called after the SMC has been initialized */ -+static int __init mimc200_flash_init(void) -+{ -+ int ret; -+ -+ smc_set_timing(&flash_config, &flash_timing); -+ ret = smc_set_configuration(0, &flash_config); -+ if (ret < 0) { -+ printk(KERN_ERR "mimc200: failed to set 'System' NOR flash timing\n"); -+ return ret; -+ } -+ ret = smc_set_configuration(1, &flash_config); -+ if (ret < 0) { -+ printk(KERN_ERR "mimc200: failed to set 'Data' NOR flash timing\n"); -+ return ret; -+ } -+ -+ platform_device_register(&flash_device_system); -+ platform_device_register(&flash_device_data); -+ -+ return 0; -+} -+device_initcall(mimc200_flash_init); -diff --git a/arch/avr32/boards/mimc200/fram.c b/arch/avr32/boards/mimc200/fram.c -new file mode 100644 -index 0000000..54fbd95 ---- /dev/null -+++ b/arch/avr32/boards/mimc200/fram.c -@@ -0,0 +1,80 @@ -+/* -+ * FRAM driver for MIMC200 board -+ * -+ * Copyright 2008 Mark Jackson <mpfj@mimc.co.uk> -+ * -+ * This module adds *very* simply support for the system's FRAM device. -+ * At the moment, this is hard-coded to the MIMC200 platform, and only -+ * supports mmap(). -+ */ -+ -+#define FRAM_VERSION "1.0" -+ -+#include <linux/miscdevice.h> -+#include <linux/proc_fs.h> -+#include <linux/mm.h> -+#include <linux/io.h> -+ -+#define FRAM_BASE 0xac000000 -+#define FRAM_SIZE 0x20000 -+ -+/* -+ * The are the file operation function for user access to /dev/fram -+ */ -+ -+static int fram_mmap(struct file *filp, struct vm_area_struct *vma) -+{ -+ int ret; -+ -+ ret = remap_pfn_range(vma, -+ vma->vm_start, -+ virt_to_phys((void *)((unsigned long)FRAM_BASE)) >> PAGE_SHIFT, -+ vma->vm_end-vma->vm_start, -+ PAGE_SHARED); -+ -+ if (ret != 0) -+ return -EAGAIN; -+ -+ return 0; -+} -+ -+static const struct file_operations fram_fops = { -+ .owner = THIS_MODULE, -+ .mmap = fram_mmap, -+}; -+ -+#define FRAM_MINOR 0 -+ -+static struct miscdevice fram_dev = { -+ FRAM_MINOR, -+ "fram", -+ &fram_fops -+}; -+ -+static int __init -+fram_init(void) -+{ -+ int ret; -+ -+ ret = misc_register(&fram_dev); -+ if (ret) { -+ printk(KERN_ERR "fram: can't misc_register on minor=%d\n", -+ FRAM_MINOR); -+ return ret; -+ } -+ printk(KERN_INFO "FRAM memory driver v" FRAM_VERSION "\n"); -+ return 0; -+} -+ -+static void __exit -+fram_cleanup_module(void) -+{ -+ misc_deregister(&fram_dev); -+} -+ -+module_init(fram_init); -+module_exit(fram_cleanup_module); -+ -+MODULE_LICENSE("GPL"); -+ -+MODULE_ALIAS_MISCDEV(FRAM_MINOR); -diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c -new file mode 100644 -index 0000000..c060d4d ---- /dev/null -+++ b/arch/avr32/boards/mimc200/setup.c -@@ -0,0 +1,235 @@ -+/* -+ * Board-specific setup code for the MIMC200 -+ * -+ * Copyright (C) 2008 Mercury IMC Ltd -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+extern struct atmel_lcdfb_info mimc200_lcdc_data; -+ -+#include <linux/clk.h> -+#include <linux/etherdevice.h> -+#include <linux/i2c-gpio.h> -+#include <linux/init.h> -+#include <linux/linkage.h> -+#include <linux/platform_device.h> -+#include <linux/types.h> -+#include <linux/leds.h> -+#include <linux/spi/spi.h> -+#include <linux/spi/eeprom.h> -+ -+#include <video/atmel_lcdc.h> -+#include <linux/fb.h> -+ -+#include <asm/atmel-mci.h> -+#include <linux/io.h> -+#include <asm/setup.h> -+ -+#include <mach/at32ap700x.h> -+#include <mach/board.h> -+#include <mach/init.h> -+#include <mach/portmux.h> -+ -+/* Oscillator frequencies. These are board-specific */ -+unsigned long at32_board_osc_rates[3] = { -+ [0] = 32768, /* 32.768 kHz on RTC osc */ -+ [1] = 10000000, /* 10 MHz on osc0 */ -+ [2] = 12000000, /* 12 MHz on osc1 */ -+}; -+ -+/* Initialized by bootloader-specific startup code. */ -+struct tag *bootloader_tags __initdata; -+ -+static struct fb_videomode __initdata tx14d14_modes[] = { -+ { -+ .name = "640x480 @ 60", -+ .refresh = 60, -+ .xres = 640, .yres = 480, -+ .pixclock = KHZ2PICOS(11666), -+ -+ .left_margin = 80, .right_margin = 1, -+ .upper_margin = 13, .lower_margin = 2, -+ .hsync_len = 64, .vsync_len = 1, -+ -+ .sync = 0, -+ .vmode = FB_VMODE_NONINTERLACED, -+ }, -+}; -+ -+static struct fb_monspecs __initdata mimc200_default_monspecs = { -+ .manufacturer = "HIT", -+ .monitor = "TX14D14VM1BAB", -+ .modedb = tx14d14_modes, -+ .modedb_len = ARRAY_SIZE(tx14d14_modes), -+ .hfmin = 14820, -+ .hfmax = 22230, -+ .vfmin = 60, -+ .vfmax = 73.3, -+ .dclkmax = 25200000, -+}; -+ -+struct atmel_lcdfb_info __initdata mimc200_lcdc_data = { -+ .default_bpp = 16, -+ .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, -+ .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT -+ | ATMEL_LCDC_INVCLK -+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE -+ | ATMEL_LCDC_MEMOR_BIG), -+ .default_monspecs = &mimc200_default_monspecs, -+ .guard_time = 2, -+}; -+ -+struct eth_addr { -+ u8 addr[6]; -+}; -+static struct eth_addr __initdata hw_addr[2]; -+static struct eth_platform_data __initdata eth_data[2]; -+ -+static struct spi_eeprom eeprom_25lc010 = { -+ .name = "25lc010", -+ .byte_len = 128, -+ .page_size = 16, -+ .flags = EE_ADDR1, -+}; -+ -+static struct spi_board_info spi0_board_info[] __initdata = { -+ { -+ .modalias = "rtc-ds1390", -+ .max_speed_hz = 4000000, -+ .chip_select = 2, -+ }, -+ { -+ .modalias = "at25", -+ .max_speed_hz = 1000000, -+ .chip_select = 1, -+ .mode = SPI_MODE_3, -+ .platform_data = &eeprom_25lc010, -+ }, -+}; -+ -+static struct mci_platform_data __initdata mci0_data = { -+ .slot[0] = { -+ .bus_width = 4, -+ .detect_pin = GPIO_PIN_PA(26), -+ .wp_pin = GPIO_PIN_PA(27), -+ }, -+}; -+ -+/* -+ * The next two functions should go away as the boot loader is -+ * supposed to initialize the macb address registers with a valid -+ * ethernet address. But we need to keep it around for a while until -+ * we can be reasonably sure the boot loader does this. -+ * -+ * The phy_id is ignored as the driver will probe for it. -+ */ -+static int __init parse_tag_ethernet(struct tag *tag) -+{ -+ int i; -+ -+ i = tag->u.ethernet.mac_index; -+ if (i < ARRAY_SIZE(hw_addr)) -+ memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address, -+ sizeof(hw_addr[i].addr)); -+ -+ return 0; -+} -+__tagtable(ATAG_ETHERNET, parse_tag_ethernet); -+ -+static void __init set_hw_addr(struct platform_device *pdev) -+{ -+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ const u8 *addr; -+ void __iomem *regs; -+ struct clk *pclk; -+ -+ if (!res) -+ return; -+ if (pdev->id >= ARRAY_SIZE(hw_addr)) -+ return; -+ -+ addr = hw_addr[pdev->id].addr; -+ if (!is_valid_ether_addr(addr)) -+ return; -+ -+ /* -+ * Since this is board-specific code, we'll cheat and use the -+ * physical address directly as we happen to know that it's -+ * the same as the virtual address. -+ */ -+ regs = (void __iomem __force *)res->start; -+ pclk = clk_get(&pdev->dev, "pclk"); -+ if (!pclk) -+ return; -+ -+ clk_enable(pclk); -+ __raw_writel((addr[3] << 24) | (addr[2] << 16) -+ | (addr[1] << 8) | addr[0], regs + 0x98); -+ __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c); -+ clk_disable(pclk); -+ clk_put(pclk); -+} -+ -+void __init setup_board(void) -+{ -+ at32_map_usart(0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */ -+ at32_map_usart(1, 1); /* USART 1: /dev/ttyS1 (RS232) */ -+ at32_map_usart(2, 2); /* USART 2: /dev/ttyS2 (RS485) */ -+ at32_map_usart(3, 3); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */ -+} -+ -+static struct i2c_gpio_platform_data i2c_gpio_data = { -+ .sda_pin = GPIO_PIN_PA(6), -+ .scl_pin = GPIO_PIN_PA(7), -+ .sda_is_open_drain = 1, -+ .scl_is_open_drain = 1, -+ .udelay = 2, /* close to 100 kHz */ -+}; -+ -+static struct platform_device i2c_gpio_device = { -+ .name = "i2c-gpio", -+ .id = 0, -+ .dev = { -+ .platform_data = &i2c_gpio_data, -+ }, -+}; -+ -+static struct i2c_board_info __initdata i2c_info[] = { -+}; -+ -+static int __init mimc200_init(void) -+{ -+ /* -+ * MIMC200 uses 16-bit SDRAM interface, so we don't need to -+ * reserve any pins for it. -+ */ -+ -+ at32_add_device_usart(0); -+ at32_add_device_usart(1); -+ at32_add_device_usart(2); -+ at32_add_device_usart(3); -+ -+ set_hw_addr(at32_add_device_eth(0, ð_data[0])); -+ set_hw_addr(at32_add_device_eth(1, ð_data[1])); -+ -+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); -+ at32_add_device_mci(0, &mci0_data); -+ at32_add_device_usba(0, NULL); -+ -+ at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP); -+ at32_select_gpio(i2c_gpio_data.sda_pin, -+ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); -+ at32_select_gpio(i2c_gpio_data.scl_pin, -+ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); -+ platform_device_register(&i2c_gpio_device); -+ i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info)); -+ -+ at32_add_device_lcdc(0, &mimc200_lcdc_data, -+ fbmem_start, fbmem_size, 1); -+ -+ return 0; -+} -+postcore_initcall(mimc200_init); -diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig -index 5415209..58fe9f3 100644 ---- a/arch/avr32/configs/atngw100_defconfig -+++ b/arch/avr32/configs/atngw100_defconfig -@@ -1,7 +1,7 @@ - # - # Automatically generated make config: don't edit --# Linux kernel version: 2.6.27-rc1 --# Tue Aug 5 16:00:47 2008 -+# Linux kernel version: 2.6.27.4 -+# Thu Nov 13 14:33:33 2008 - # - CONFIG_AVR32=y - CONFIG_GENERIC_GPIO=y -@@ -130,11 +130,15 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y - CONFIG_SUBARCH_AVR32B=y - CONFIG_MMU=y - CONFIG_PERFORMANCE_COUNTERS=y -+CONFIG_PORTMUX_PIO=y - CONFIG_PLATFORM_AT32AP=y - CONFIG_CPU_AT32AP700X=y - CONFIG_CPU_AT32AP7000=y - # CONFIG_BOARD_ATSTK1000 is not set - CONFIG_BOARD_ATNGW100=y -+# CONFIG_BOARD_FAVR_32 is not set -+# CONFIG_BOARD_MIMC200 is not set -+# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set - CONFIG_LOADER_U_BOOT=y - - # -@@ -177,7 +181,7 @@ CONFIG_HZ_250=y - # CONFIG_HZ_300 is not set - # CONFIG_HZ_1000 is not set - CONFIG_HZ=250 --# CONFIG_SCHED_HRTICK is not set -+CONFIG_SCHED_HRTICK=y - CONFIG_CMDLINE="" - - # -@@ -615,6 +619,7 @@ CONFIG_UNIX98_PTYS=y - CONFIG_I2C=m - CONFIG_I2C_BOARDINFO=y - CONFIG_I2C_CHARDEV=m -+CONFIG_I2C_HELPER_AUTO=y - CONFIG_I2C_ALGOBIT=m - - # -@@ -664,6 +669,7 @@ CONFIG_SPI_MASTER=y - # - # SPI Master Controller Drivers - # -+CONFIG_SPI_ATMEL_HAVE_PDC=y - CONFIG_SPI_ATMEL=y - # CONFIG_SPI_BITBANG is not set - -@@ -706,7 +712,7 @@ CONFIG_WATCHDOG=y - # Watchdog Device Drivers - # - # CONFIG_SOFT_WATCHDOG is not set --CONFIG_AT32AP700X_WDT=y -+CONFIG_AT32_WDT=y - - # - # Sonics Silicon Backplane -@@ -720,6 +726,7 @@ CONFIG_SSB_POSSIBLE=y - # CONFIG_MFD_CORE is not set - # CONFIG_MFD_SM501 is not set - # CONFIG_HTC_PASIC3 is not set -+# CONFIG_MFD_TMIO is not set - - # - # Multimedia devices -@@ -751,11 +758,14 @@ CONFIG_SSB_POSSIBLE=y - # CONFIG_DISPLAY_SUPPORT is not set - # CONFIG_SOUND is not set - CONFIG_USB_SUPPORT=y --# CONFIG_USB_ARCH_HAS_HCD is not set --# CONFIG_USB_ARCH_HAS_OHCI is not set --# CONFIG_USB_ARCH_HAS_EHCI is not set -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+CONFIG_USB_ARCH_HAS_EHCI=y -+# CONFIG_USB is not set - # CONFIG_USB_OTG_WHITELIST is not set - # CONFIG_USB_OTG_BLACKLIST_HUB is not set -+# CONFIG_USB_MUSB_HDRC is not set -+# CONFIG_USB_GADGET_MUSB_HDRC is not set - - # - # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -@@ -806,6 +816,7 @@ CONFIG_MMC_TEST=m - # - # CONFIG_MMC_SDHCI is not set - CONFIG_MMC_ATMELMCI=y -+# CONFIG_MMC_ATMELMCI_DMA is not set - CONFIG_MMC_SPI=m - # CONFIG_MEMSTICK is not set - CONFIG_NEW_LEDS=y -@@ -880,11 +891,13 @@ CONFIG_RTC_INTF_DEV=y - # on-CPU RTC drivers - # - CONFIG_RTC_DRV_AT32AP700X=y -+# CONFIG_RTC_DRV_AVR32_AST is not set - CONFIG_DMADEVICES=y - - # - # DMA Devices - # -+# CONFIG_ATMEL_PDCA is not set - CONFIG_DW_DMAC=y - CONFIG_DMA_ENGINE=y - -@@ -898,13 +911,13 @@ CONFIG_DMATEST=m - # - # File systems - # --CONFIG_EXT2_FS=m -+CONFIG_EXT2_FS=y - # CONFIG_EXT2_FS_XATTR is not set - # CONFIG_EXT2_FS_XIP is not set --CONFIG_EXT3_FS=m -+CONFIG_EXT3_FS=y - # CONFIG_EXT3_FS_XATTR is not set - # CONFIG_EXT4DEV_FS is not set --CONFIG_JBD=m -+CONFIG_JBD=y - # CONFIG_REISERFS_FS is not set - # CONFIG_JFS_FS is not set - # CONFIG_FS_POSIX_ACL is not set -@@ -944,7 +957,7 @@ CONFIG_SYSFS=y - CONFIG_TMPFS=y - # CONFIG_TMPFS_POSIX_ACL is not set - # CONFIG_HUGETLB_PAGE is not set --CONFIG_CONFIGFS_FS=m -+CONFIG_CONFIGFS_FS=y - - # - # Miscellaneous filesystems -diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig -new file mode 100644 -index 0000000..24f57fa ---- /dev/null -+++ b/arch/avr32/configs/atngw100_evklcd100_defconfig -@@ -0,0 +1,1323 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.27.4 -+# Thu Nov 13 14:10:50 2008 -+# -+CONFIG_AVR32=y -+CONFIG_GENERIC_GPIO=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+CONFIG_GENERIC_TIME=y -+CONFIG_GENERIC_CLOCKEVENTS=y -+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_GENERIC_BUG=y -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+CONFIG_POSIX_MQUEUE=y -+CONFIG_BSD_PROCESS_ACCT=y -+CONFIG_BSD_PROCESS_ACCT_V3=y -+# CONFIG_TASKSTATS is not set -+# CONFIG_AUDIT is not set -+# CONFIG_IKCONFIG is not set -+CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_CGROUPS is not set -+# CONFIG_GROUP_SCHED is not set -+CONFIG_SYSFS_DEPRECATED=y -+CONFIG_SYSFS_DEPRECATED_V2=y -+# CONFIG_RELAY is not set -+# CONFIG_NAMESPACES is not set -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+CONFIG_EMBEDDED=y -+# CONFIG_SYSCTL_SYSCALL is not set -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_ALL is not set -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+# CONFIG_COMPAT_BRK is not set -+# CONFIG_BASE_FULL is not set -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_TIMERFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLUB_DEBUG=y -+# CONFIG_SLAB is not set -+CONFIG_SLUB=y -+# CONFIG_SLOB is not set -+CONFIG_PROFILING=y -+# CONFIG_MARKERS is not set -+CONFIG_OPROFILE=m -+CONFIG_HAVE_OPROFILE=y -+CONFIG_KPROBES=y -+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -+# CONFIG_HAVE_IOREMAP_PROT is not set -+CONFIG_HAVE_KPROBES=y -+# CONFIG_HAVE_KRETPROBES is not set -+# CONFIG_HAVE_ARCH_TRACEHOOK is not set -+# CONFIG_HAVE_DMA_ATTRS is not set -+# CONFIG_USE_GENERIC_SMP_HELPERS is not set -+CONFIG_HAVE_CLK=y -+CONFIG_PROC_PAGE_MONITOR=y -+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=1 -+CONFIG_MODULES=y -+# CONFIG_MODULE_FORCE_LOAD is not set -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODULE_FORCE_UNLOAD=y -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+CONFIG_BLOCK=y -+# CONFIG_LBD is not set -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+# CONFIG_BLK_DEV_INTEGRITY is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+# CONFIG_IOSCHED_AS is not set -+# CONFIG_IOSCHED_DEADLINE is not set -+CONFIG_IOSCHED_CFQ=y -+# CONFIG_DEFAULT_AS is not set -+# CONFIG_DEFAULT_DEADLINE is not set -+CONFIG_DEFAULT_CFQ=y -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="cfq" -+CONFIG_CLASSIC_RCU=y -+ -+# -+# System Type and features -+# -+CONFIG_TICK_ONESHOT=y -+CONFIG_NO_HZ=y -+CONFIG_HIGH_RES_TIMERS=y -+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -+CONFIG_SUBARCH_AVR32B=y -+CONFIG_MMU=y -+CONFIG_PERFORMANCE_COUNTERS=y -+CONFIG_PORTMUX_PIO=y -+CONFIG_PLATFORM_AT32AP=y -+CONFIG_CPU_AT32AP700X=y -+CONFIG_CPU_AT32AP7000=y -+# CONFIG_BOARD_ATSTK1000 is not set -+CONFIG_BOARD_ATNGW100=y -+# CONFIG_BOARD_FAVR_32 is not set -+# CONFIG_BOARD_MIMC200 is not set -+CONFIG_BOARD_ATNGW100_EVKLCD10X=y -+CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA=y -+# CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA is not set -+# CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA is not set -+CONFIG_LOADER_U_BOOT=y -+ -+# -+# Atmel AVR32 AP options -+# -+# CONFIG_AP700X_32_BIT_SMC is not set -+CONFIG_AP700X_16_BIT_SMC=y -+# CONFIG_AP700X_8_BIT_SMC is not set -+CONFIG_LOAD_ADDRESS=0x10000000 -+CONFIG_ENTRY_ADDRESS=0x90000000 -+CONFIG_PHYS_OFFSET=0x10000000 -+CONFIG_PREEMPT_NONE=y -+# CONFIG_PREEMPT_VOLUNTARY is not set -+# CONFIG_PREEMPT is not set -+CONFIG_QUICKLIST=y -+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set -+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set -+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set -+CONFIG_ARCH_FLATMEM_ENABLE=y -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -+CONFIG_PAGEFLAGS_EXTENDED=y -+CONFIG_SPLIT_PTLOCK_CPUS=4 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=0 -+CONFIG_NR_QUICK=2 -+CONFIG_VIRT_TO_BUS=y -+# CONFIG_OWNERSHIP_TRACE is not set -+CONFIG_NMI_DEBUGGING=y -+# CONFIG_HZ_100 is not set -+CONFIG_HZ_250=y -+# CONFIG_HZ_300 is not set -+# CONFIG_HZ_1000 is not set -+CONFIG_HZ=250 -+CONFIG_SCHED_HRTICK=y -+CONFIG_CMDLINE="" -+ -+# -+# Power management options -+# -+CONFIG_PM=y -+# CONFIG_PM_DEBUG is not set -+CONFIG_PM_SLEEP=y -+CONFIG_SUSPEND=y -+CONFIG_SUSPEND_FREEZER=y -+CONFIG_ARCH_SUSPEND_POSSIBLE=y -+ -+# -+# CPU Frequency scaling -+# -+CONFIG_CPU_FREQ=y -+CONFIG_CPU_FREQ_TABLE=y -+# CONFIG_CPU_FREQ_DEBUG is not set -+# CONFIG_CPU_FREQ_STAT is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -+CONFIG_CPU_FREQ_GOV_USERSPACE=y -+CONFIG_CPU_FREQ_GOV_ONDEMAND=y -+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_AT32AP=y -+ -+# -+# Bus options -+# -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+# CONFIG_PCCARD is not set -+ -+# -+# Executable file formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_MISC is not set -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+CONFIG_PACKET_MMAP=y -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+CONFIG_XFRM_USER=y -+# CONFIG_XFRM_SUB_POLICY is not set -+# CONFIG_XFRM_MIGRATE is not set -+# CONFIG_XFRM_STATISTICS is not set -+CONFIG_XFRM_IPCOMP=y -+CONFIG_NET_KEY=y -+# CONFIG_NET_KEY_MIGRATE is not set -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+CONFIG_IP_ADVANCED_ROUTER=y -+CONFIG_ASK_IP_FIB_HASH=y -+# CONFIG_IP_FIB_TRIE is not set -+CONFIG_IP_FIB_HASH=y -+# CONFIG_IP_MULTIPLE_TABLES is not set -+# CONFIG_IP_ROUTE_MULTIPATH is not set -+# CONFIG_IP_ROUTE_VERBOSE is not set -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+CONFIG_IP_MROUTE=y -+CONFIG_IP_PIMSM_V1=y -+# CONFIG_IP_PIMSM_V2 is not set -+# CONFIG_ARPD is not set -+CONFIG_SYN_COOKIES=y -+CONFIG_INET_AH=y -+CONFIG_INET_ESP=y -+CONFIG_INET_IPCOMP=y -+CONFIG_INET_XFRM_TUNNEL=y -+CONFIG_INET_TUNNEL=y -+CONFIG_INET_XFRM_MODE_TRANSPORT=y -+CONFIG_INET_XFRM_MODE_TUNNEL=y -+CONFIG_INET_XFRM_MODE_BEET=y -+# CONFIG_INET_LRO is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set -+# CONFIG_IP_VS is not set -+CONFIG_IPV6=y -+# CONFIG_IPV6_PRIVACY is not set -+# CONFIG_IPV6_ROUTER_PREF is not set -+# CONFIG_IPV6_OPTIMISTIC_DAD is not set -+CONFIG_INET6_AH=y -+CONFIG_INET6_ESP=y -+CONFIG_INET6_IPCOMP=y -+# CONFIG_IPV6_MIP6 is not set -+CONFIG_INET6_XFRM_TUNNEL=y -+CONFIG_INET6_TUNNEL=y -+CONFIG_INET6_XFRM_MODE_TRANSPORT=y -+CONFIG_INET6_XFRM_MODE_TUNNEL=y -+CONFIG_INET6_XFRM_MODE_BEET=y -+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -+CONFIG_IPV6_SIT=y -+CONFIG_IPV6_NDISC_NODETYPE=y -+# CONFIG_IPV6_TUNNEL is not set -+# CONFIG_IPV6_MULTIPLE_TABLES is not set -+# CONFIG_IPV6_MROUTE is not set -+# CONFIG_NETWORK_SECMARK is not set -+CONFIG_NETFILTER=y -+# CONFIG_NETFILTER_DEBUG is not set -+# CONFIG_NETFILTER_ADVANCED is not set -+ -+# -+# Core Netfilter Configuration -+# -+CONFIG_NETFILTER_NETLINK=m -+CONFIG_NETFILTER_NETLINK_LOG=m -+CONFIG_NF_CONNTRACK=m -+CONFIG_NF_CONNTRACK_FTP=m -+CONFIG_NF_CONNTRACK_IRC=m -+CONFIG_NF_CONNTRACK_SIP=m -+CONFIG_NF_CT_NETLINK=m -+CONFIG_NETFILTER_XTABLES=y -+CONFIG_NETFILTER_XT_TARGET_MARK=m -+CONFIG_NETFILTER_XT_TARGET_NFLOG=m -+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -+CONFIG_NETFILTER_XT_MATCH_MARK=m -+CONFIG_NETFILTER_XT_MATCH_POLICY=m -+CONFIG_NETFILTER_XT_MATCH_STATE=m -+ -+# -+# IP: Netfilter Configuration -+# -+CONFIG_NF_CONNTRACK_IPV4=m -+CONFIG_NF_CONNTRACK_PROC_COMPAT=y -+CONFIG_IP_NF_IPTABLES=m -+CONFIG_IP_NF_FILTER=m -+CONFIG_IP_NF_TARGET_REJECT=m -+CONFIG_IP_NF_TARGET_LOG=m -+# CONFIG_IP_NF_TARGET_ULOG is not set -+CONFIG_NF_NAT=m -+CONFIG_NF_NAT_NEEDED=y -+CONFIG_IP_NF_TARGET_MASQUERADE=m -+CONFIG_NF_NAT_FTP=m -+CONFIG_NF_NAT_IRC=m -+# CONFIG_NF_NAT_TFTP is not set -+# CONFIG_NF_NAT_AMANDA is not set -+# CONFIG_NF_NAT_PPTP is not set -+# CONFIG_NF_NAT_H323 is not set -+CONFIG_NF_NAT_SIP=m -+CONFIG_IP_NF_MANGLE=m -+ -+# -+# IPv6: Netfilter Configuration -+# -+CONFIG_NF_CONNTRACK_IPV6=m -+CONFIG_IP6_NF_IPTABLES=m -+CONFIG_IP6_NF_MATCH_IPV6HEADER=m -+CONFIG_IP6_NF_FILTER=m -+CONFIG_IP6_NF_TARGET_LOG=m -+CONFIG_IP6_NF_TARGET_REJECT=m -+CONFIG_IP6_NF_MANGLE=m -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+CONFIG_STP=m -+CONFIG_BRIDGE=m -+CONFIG_VLAN_8021Q=m -+# CONFIG_VLAN_8021Q_GVRP is not set -+# CONFIG_DECNET is not set -+CONFIG_LLC=m -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_NET_TCPPROBE is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_CAN is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_EXT is not set -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+CONFIG_STANDALONE=y -+# CONFIG_PREVENT_FIRMWARE_BUILD is not set -+# CONFIG_FW_LOADER is not set -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+# CONFIG_CONNECTOR is not set -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AR7_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_GEN_PROBE=y -+# CONFIG_MTD_CFI_ADV_OPTIONS is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+# CONFIG_MTD_CFI_INTELEXT is not set -+CONFIG_MTD_CFI_AMDSTD=y -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+CONFIG_MTD_PHYSMAP=y -+CONFIG_MTD_PHYSMAP_START=0x80000000 -+CONFIG_MTD_PHYSMAP_LEN=0x0 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+CONFIG_MTD_DATAFLASH=y -+# CONFIG_MTD_M25P80 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+# CONFIG_MTD_NAND is not set -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+CONFIG_MTD_UBI=y -+CONFIG_MTD_UBI_WL_THRESHOLD=4096 -+CONFIG_MTD_UBI_BEB_RESERVE=1 -+# CONFIG_MTD_UBI_GLUEBI is not set -+ -+# -+# UBI debugging options -+# -+# CONFIG_MTD_UBI_DEBUG is not set -+# CONFIG_PARPORT is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=m -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+CONFIG_BLK_DEV_NBD=m -+CONFIG_BLK_DEV_RAM=m -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=4096 -+# CONFIG_BLK_DEV_XIP is not set -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_ATMEL_PWM is not set -+CONFIG_ATMEL_TCLIB=y -+CONFIG_ATMEL_TCB_CLKSRC=y -+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 -+# CONFIG_EEPROM_93CX6 is not set -+# CONFIG_ATMEL_SSC is not set -+# CONFIG_ENCLOSURE_SERVICES is not set -+# CONFIG_HAVE_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+# CONFIG_SCSI is not set -+# CONFIG_SCSI_DMA is not set -+# CONFIG_SCSI_NETLINK is not set -+# CONFIG_ATA is not set -+# CONFIG_MD is not set -+CONFIG_NETDEVICES=y -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+# CONFIG_VETH is not set -+CONFIG_PHYLIB=y -+ -+# -+# MII PHY device drivers -+# -+# CONFIG_MARVELL_PHY is not set -+# CONFIG_DAVICOM_PHY is not set -+# CONFIG_QSEMI_PHY is not set -+# CONFIG_LXT_PHY is not set -+# CONFIG_CICADA_PHY is not set -+# CONFIG_VITESSE_PHY is not set -+# CONFIG_SMSC_PHY is not set -+# CONFIG_BROADCOM_PHY is not set -+# CONFIG_ICPLUS_PHY is not set -+# CONFIG_REALTEK_PHY is not set -+# CONFIG_FIXED_PHY is not set -+# CONFIG_MDIO_BITBANG is not set -+CONFIG_NET_ETHERNET=y -+# CONFIG_MII is not set -+CONFIG_MACB=y -+# CONFIG_ENC28J60 is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_B44 is not set -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+# CONFIG_IWLWIFI_LEDS is not set -+# CONFIG_WAN is not set -+CONFIG_PPP=m -+# CONFIG_PPP_MULTILINK is not set -+CONFIG_PPP_FILTER=y -+CONFIG_PPP_ASYNC=m -+# CONFIG_PPP_SYNC_TTY is not set -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_BSDCOMP=m -+CONFIG_PPP_MPPE=m -+CONFIG_PPPOE=m -+# CONFIG_PPPOL2TP is not set -+# CONFIG_SLIP is not set -+CONFIG_SLHC=m -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+# CONFIG_PHONE is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set -+ -+# -+# Userland interfaces -+# -+# CONFIG_INPUT_MOUSEDEV is not set -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=m -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+# CONFIG_INPUT_KEYBOARD is not set -+# CONFIG_INPUT_MOUSE is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+CONFIG_INPUT_TOUCHSCREEN=y -+# CONFIG_TOUCHSCREEN_ADS7846 is not set -+# CONFIG_TOUCHSCREEN_FUJITSU is not set -+# CONFIG_TOUCHSCREEN_GUNZE is not set -+# CONFIG_TOUCHSCREEN_ELO is not set -+# CONFIG_TOUCHSCREEN_MTOUCH is not set -+# CONFIG_TOUCHSCREEN_INEXIO is not set -+# CONFIG_TOUCHSCREEN_MK712 is not set -+# CONFIG_TOUCHSCREEN_PENMOUNT is not set -+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -+# CONFIG_TOUCHSCREEN_UCB1400 is not set -+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set -+# CONFIG_INPUT_MISC is not set -+ -+# -+# Hardware I/O ports -+# -+# CONFIG_SERIO is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_CONSOLE_TRANSLATIONS=y -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+CONFIG_DEVKMEM=y -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_ATMEL=y -+CONFIG_SERIAL_ATMEL_CONSOLE=y -+CONFIG_SERIAL_ATMEL_PDC=y -+# CONFIG_SERIAL_ATMEL_TTYAT is not set -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=m -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=m -+CONFIG_I2C_HELPER_AUTO=y -+CONFIG_I2C_ALGOBIT=m -+ -+# -+# I2C Hardware Bus support -+# -+ -+# -+# I2C system bus drivers (mostly embedded / system-on-chip) -+# -+CONFIG_I2C_GPIO=m -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_SIMTEC is not set -+ -+# -+# External I2C/SMBus adapter drivers -+# -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_TAOS_EVM is not set -+ -+# -+# Other I2C/SMBus bus drivers -+# -+# CONFIG_I2C_PCA_PLATFORM is not set -+# CONFIG_I2C_STUB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_DS1682 is not set -+# CONFIG_AT24 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_PCF8575 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_TPS65010 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+CONFIG_SPI_ATMEL_HAVE_PDC=y -+CONFIG_SPI_ATMEL=y -+# CONFIG_SPI_BITBANG is not set -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+CONFIG_SPI_SPIDEV=m -+# CONFIG_SPI_TLE62X0 is not set -+CONFIG_ARCH_REQUIRE_GPIOLIB=y -+CONFIG_GPIOLIB=y -+# CONFIG_DEBUG_GPIO is not set -+# CONFIG_GPIO_SYSFS is not set -+ -+# -+# I2C GPIO expanders: -+# -+# CONFIG_GPIO_MAX732X is not set -+# CONFIG_GPIO_PCA953X is not set -+# CONFIG_GPIO_PCF857X is not set -+ -+# -+# PCI GPIO expanders: -+# -+ -+# -+# SPI GPIO expanders: -+# -+# CONFIG_GPIO_MAX7301 is not set -+# CONFIG_GPIO_MCP23S08 is not set -+# CONFIG_W1 is not set -+# CONFIG_POWER_SUPPLY is not set -+# CONFIG_HWMON is not set -+# CONFIG_THERMAL is not set -+# CONFIG_THERMAL_HWMON is not set -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_AT32_WDT=y -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_CORE is not set -+# CONFIG_MFD_SM501 is not set -+# CONFIG_HTC_PASIC3 is not set -+# CONFIG_MFD_TMIO is not set -+ -+# -+# Multimedia devices -+# -+ -+# -+# Multimedia core support -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+# CONFIG_VIDEO_MEDIA is not set -+ -+# -+# Multimedia drivers -+# -+# CONFIG_DAB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+CONFIG_FB=y -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB_DDC is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_FOREIGN_ENDIAN is not set -+# CONFIG_FB_SYS_FOPS is not set -+# CONFIG_FB_SVGALIB is not set -+# CONFIG_FB_MACMODES is not set -+# CONFIG_FB_BACKLIGHT is not set -+# CONFIG_FB_MODE_HELPERS is not set -+# CONFIG_FB_TILEBLITTING is not set -+ -+# -+# Frame buffer hardware drivers -+# -+# CONFIG_FB_S1D13XXX is not set -+CONFIG_FB_ATMEL=y -+# CONFIG_FB_ATMEL_MPOP is not set -+# CONFIG_FB_VIRTUAL is not set -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+ -+# -+# Console display driver support -+# -+CONFIG_DUMMY_CONSOLE=y -+# CONFIG_FRAMEBUFFER_CONSOLE is not set -+# CONFIG_LOGO is not set -+CONFIG_SOUND=y -+CONFIG_SND=y -+CONFIG_SND_TIMER=m -+CONFIG_SND_PCM=m -+# CONFIG_SND_SEQUENCER is not set -+CONFIG_SND_OSSEMUL=y -+CONFIG_SND_MIXER_OSS=m -+CONFIG_SND_PCM_OSS=m -+CONFIG_SND_PCM_OSS_PLUGINS=y -+# CONFIG_SND_DYNAMIC_MINORS is not set -+# CONFIG_SND_SUPPORT_OLD_API is not set -+CONFIG_SND_VERBOSE_PROCFS=y -+# CONFIG_SND_VERBOSE_PRINTK is not set -+# CONFIG_SND_DEBUG is not set -+CONFIG_SND_DRIVERS=y -+# CONFIG_SND_DUMMY is not set -+# CONFIG_SND_MTPAV is not set -+# CONFIG_SND_SERIAL_U16550 is not set -+# CONFIG_SND_MPU401 is not set -+CONFIG_SND_SPI=y -+# CONFIG_SND_SOC is not set -+# CONFIG_SOUND_PRIME is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+# CONFIG_HID_DEBUG is not set -+# CONFIG_HIDRAW is not set -+CONFIG_USB_SUPPORT=y -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+CONFIG_USB_ARCH_HAS_EHCI=y -+# CONFIG_USB is not set -+# CONFIG_USB_OTG_WHITELIST is not set -+# CONFIG_USB_OTG_BLACKLIST_HUB is not set -+# CONFIG_USB_MUSB_HDRC is not set -+# CONFIG_USB_GADGET_MUSB_HDRC is not set -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+CONFIG_USB_GADGET_ATMEL_USBA=y -+CONFIG_USB_ATMEL_USBA=y -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA25X is not set -+# CONFIG_USB_GADGET_M66592 is not set -+# CONFIG_USB_GADGET_PXA27X is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_S3C2410 is not set -+# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+CONFIG_USB_GADGET_DUALSPEED=y -+CONFIG_USB_ZERO=m -+CONFIG_USB_ETH=m -+CONFIG_USB_ETH_RNDIS=y -+CONFIG_USB_GADGETFS=m -+CONFIG_USB_FILE_STORAGE=m -+# CONFIG_USB_FILE_STORAGE_TEST is not set -+CONFIG_USB_G_SERIAL=m -+# CONFIG_USB_MIDI_GADGET is not set -+# CONFIG_USB_G_PRINTER is not set -+# CONFIG_USB_CDC_COMPOSITE is not set -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+# CONFIG_MMC_UNSAFE_RESUME is not set -+ -+# -+# MMC/SD Card Drivers -+# -+CONFIG_MMC_BLOCK=y -+CONFIG_MMC_BLOCK_BOUNCE=y -+# CONFIG_SDIO_UART is not set -+# CONFIG_MMC_TEST is not set -+ -+# -+# MMC/SD Host Controller Drivers -+# -+# CONFIG_MMC_SDHCI is not set -+CONFIG_MMC_ATMELMCI=y -+# CONFIG_MMC_SPI is not set -+# CONFIG_MEMSTICK is not set -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=y -+ -+# -+# LED drivers -+# -+# CONFIG_LEDS_PCA9532 is not set -+CONFIG_LEDS_GPIO=y -+# CONFIG_LEDS_PCA955X is not set -+ -+# -+# LED Triggers -+# -+CONFIG_LEDS_TRIGGERS=y -+CONFIG_LEDS_TRIGGER_TIMER=y -+CONFIG_LEDS_TRIGGER_HEARTBEAT=y -+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set -+# CONFIG_ACCESSIBILITY is not set -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+# CONFIG_RTC_DEBUG is not set -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+# CONFIG_RTC_DRV_S35390A is not set -+# CONFIG_RTC_DRV_FM3130 is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_M41T94 is not set -+# CONFIG_RTC_DRV_DS1305 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set -+# CONFIG_RTC_DRV_R9701 is not set -+# CONFIG_RTC_DRV_RS5C348 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_DS1511 is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_AT32AP700X=y -+# CONFIG_RTC_DRV_AVR32_AST is not set -+# CONFIG_DMADEVICES is not set -+# CONFIG_UIO is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+# CONFIG_EXT3_FS_XATTR is not set -+# CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=y -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_FS_POSIX_ACL is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_OCFS2_FS is not set -+# CONFIG_DNOTIFY is not set -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+CONFIG_FUSE_FS=m -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=m -+CONFIG_MSDOS_FS=m -+CONFIG_VFAT_FS=m -+CONFIG_FAT_DEFAULT_CODEPAGE=850 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+# CONFIG_PROC_KCORE is not set -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_CONFIGFS_FS=y -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -+# CONFIG_JFFS2_SUMMARY is not set -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+# CONFIG_JFFS2_LZO is not set -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+CONFIG_UBIFS_FS=y -+# CONFIG_UBIFS_FS_XATTR is not set -+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -+CONFIG_UBIFS_FS_LZO=y -+CONFIG_UBIFS_FS_ZLIB=y -+# CONFIG_UBIFS_FS_DEBUG is not set -+# CONFIG_CRAMFS is not set -+# CONFIG_VXFS_FS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_OMFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_ROMFS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+CONFIG_NETWORK_FILESYSTEMS=y -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3=y -+# CONFIG_NFS_V3_ACL is not set -+# CONFIG_NFS_V4 is not set -+CONFIG_ROOT_NFS=y -+CONFIG_NFSD=m -+CONFIG_NFSD_V3=y -+# CONFIG_NFSD_V3_ACL is not set -+# CONFIG_NFSD_V4 is not set -+CONFIG_LOCKD=y -+CONFIG_LOCKD_V4=y -+CONFIG_EXPORTFS=m -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+CONFIG_SMB_FS=m -+# CONFIG_SMB_NLS_DEFAULT is not set -+CONFIG_CIFS=m -+# CONFIG_CIFS_STATS is not set -+# CONFIG_CIFS_WEAK_PW_HASH is not set -+# CONFIG_CIFS_XATTR is not set -+# CONFIG_CIFS_DEBUG2 is not set -+# CONFIG_CIFS_EXPERIMENTAL is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+CONFIG_NLS=m -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=m -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+CONFIG_NLS_CODEPAGE_850=m -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=m -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=m -+# CONFIG_DLM is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y -+CONFIG_ENABLE_MUST_CHECK=y -+CONFIG_FRAME_WARN=1024 -+CONFIG_MAGIC_SYSRQ=y -+# CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+# CONFIG_DEBUG_SHIRQ is not set -+CONFIG_DETECT_SOFTLOCKUP=y -+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -+CONFIG_SCHED_DEBUG=y -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set -+# CONFIG_DEBUG_OBJECTS is not set -+# CONFIG_SLUB_DEBUG_ON is not set -+# CONFIG_SLUB_STATS is not set -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+# CONFIG_DEBUG_INFO is not set -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_WRITECOUNT is not set -+# CONFIG_DEBUG_MEMORY_INIT is not set -+# CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set -+CONFIG_FRAME_POINTER=y -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_KPROBES_SANITY_TEST is not set -+# CONFIG_BACKTRACE_SELF_TEST is not set -+# CONFIG_LKDTM is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+CONFIG_CRYPTO=y -+ -+# -+# Crypto core or helper -+# -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_AEAD=y -+CONFIG_CRYPTO_BLKCIPHER=y -+CONFIG_CRYPTO_HASH=y -+CONFIG_CRYPTO_MANAGER=y -+# CONFIG_CRYPTO_GF128MUL is not set -+# CONFIG_CRYPTO_NULL is not set -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_AUTHENC=y -+# CONFIG_CRYPTO_TEST is not set -+ -+# -+# Authenticated Encryption with Associated Data -+# -+# CONFIG_CRYPTO_CCM is not set -+# CONFIG_CRYPTO_GCM is not set -+# CONFIG_CRYPTO_SEQIV is not set -+ -+# -+# Block modes -+# -+CONFIG_CRYPTO_CBC=y -+# CONFIG_CRYPTO_CTR is not set -+# CONFIG_CRYPTO_CTS is not set -+CONFIG_CRYPTO_ECB=m -+# CONFIG_CRYPTO_LRW is not set -+# CONFIG_CRYPTO_PCBC is not set -+# CONFIG_CRYPTO_XTS is not set -+ -+# -+# Hash modes -+# -+CONFIG_CRYPTO_HMAC=y -+# CONFIG_CRYPTO_XCBC is not set -+ -+# -+# Digest -+# -+# CONFIG_CRYPTO_CRC32C is not set -+# CONFIG_CRYPTO_MD4 is not set -+CONFIG_CRYPTO_MD5=y -+# CONFIG_CRYPTO_MICHAEL_MIC is not set -+# CONFIG_CRYPTO_RMD128 is not set -+# CONFIG_CRYPTO_RMD160 is not set -+# CONFIG_CRYPTO_RMD256 is not set -+# CONFIG_CRYPTO_RMD320 is not set -+CONFIG_CRYPTO_SHA1=y -+# CONFIG_CRYPTO_SHA256 is not set -+# CONFIG_CRYPTO_SHA512 is not set -+# CONFIG_CRYPTO_TGR192 is not set -+# CONFIG_CRYPTO_WP512 is not set -+ -+# -+# Ciphers -+# -+# CONFIG_CRYPTO_AES is not set -+# CONFIG_CRYPTO_ANUBIS is not set -+CONFIG_CRYPTO_ARC4=m -+# CONFIG_CRYPTO_BLOWFISH is not set -+# CONFIG_CRYPTO_CAMELLIA is not set -+# CONFIG_CRYPTO_CAST5 is not set -+# CONFIG_CRYPTO_CAST6 is not set -+CONFIG_CRYPTO_DES=y -+# CONFIG_CRYPTO_FCRYPT is not set -+# CONFIG_CRYPTO_KHAZAD is not set -+# CONFIG_CRYPTO_SALSA20 is not set -+# CONFIG_CRYPTO_SEED is not set -+# CONFIG_CRYPTO_SERPENT is not set -+# CONFIG_CRYPTO_TEA is not set -+# CONFIG_CRYPTO_TWOFISH is not set -+ -+# -+# Compression -+# -+CONFIG_CRYPTO_DEFLATE=y -+CONFIG_CRYPTO_LZO=y -+CONFIG_CRYPTO_HW=y -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+# CONFIG_GENERIC_FIND_FIRST_BIT is not set -+# CONFIG_GENERIC_FIND_NEXT_BIT is not set -+CONFIG_CRC_CCITT=m -+CONFIG_CRC16=y -+# CONFIG_CRC_T10DIF is not set -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+# CONFIG_LIBCRC32C is not set -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_LZO_COMPRESS=y -+CONFIG_LZO_DECOMPRESS=y -+CONFIG_GENERIC_ALLOCATOR=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y -diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig -new file mode 100644 -index 0000000..253b4b9 ---- /dev/null -+++ b/arch/avr32/configs/atngw100_evklcd101_defconfig -@@ -0,0 +1,1323 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.27.4 -+# Thu Nov 13 14:11:19 2008 -+# -+CONFIG_AVR32=y -+CONFIG_GENERIC_GPIO=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+CONFIG_GENERIC_TIME=y -+CONFIG_GENERIC_CLOCKEVENTS=y -+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_GENERIC_BUG=y -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+CONFIG_POSIX_MQUEUE=y -+CONFIG_BSD_PROCESS_ACCT=y -+CONFIG_BSD_PROCESS_ACCT_V3=y -+# CONFIG_TASKSTATS is not set -+# CONFIG_AUDIT is not set -+# CONFIG_IKCONFIG is not set -+CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_CGROUPS is not set -+# CONFIG_GROUP_SCHED is not set -+CONFIG_SYSFS_DEPRECATED=y -+CONFIG_SYSFS_DEPRECATED_V2=y -+# CONFIG_RELAY is not set -+# CONFIG_NAMESPACES is not set -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+CONFIG_EMBEDDED=y -+# CONFIG_SYSCTL_SYSCALL is not set -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_ALL is not set -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+# CONFIG_COMPAT_BRK is not set -+# CONFIG_BASE_FULL is not set -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_TIMERFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLUB_DEBUG=y -+# CONFIG_SLAB is not set -+CONFIG_SLUB=y -+# CONFIG_SLOB is not set -+CONFIG_PROFILING=y -+# CONFIG_MARKERS is not set -+CONFIG_OPROFILE=m -+CONFIG_HAVE_OPROFILE=y -+CONFIG_KPROBES=y -+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -+# CONFIG_HAVE_IOREMAP_PROT is not set -+CONFIG_HAVE_KPROBES=y -+# CONFIG_HAVE_KRETPROBES is not set -+# CONFIG_HAVE_ARCH_TRACEHOOK is not set -+# CONFIG_HAVE_DMA_ATTRS is not set -+# CONFIG_USE_GENERIC_SMP_HELPERS is not set -+CONFIG_HAVE_CLK=y -+CONFIG_PROC_PAGE_MONITOR=y -+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=1 -+CONFIG_MODULES=y -+# CONFIG_MODULE_FORCE_LOAD is not set -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODULE_FORCE_UNLOAD=y -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+CONFIG_BLOCK=y -+# CONFIG_LBD is not set -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+# CONFIG_BLK_DEV_INTEGRITY is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+# CONFIG_IOSCHED_AS is not set -+# CONFIG_IOSCHED_DEADLINE is not set -+CONFIG_IOSCHED_CFQ=y -+# CONFIG_DEFAULT_AS is not set -+# CONFIG_DEFAULT_DEADLINE is not set -+CONFIG_DEFAULT_CFQ=y -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="cfq" -+CONFIG_CLASSIC_RCU=y -+ -+# -+# System Type and features -+# -+CONFIG_TICK_ONESHOT=y -+CONFIG_NO_HZ=y -+CONFIG_HIGH_RES_TIMERS=y -+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -+CONFIG_SUBARCH_AVR32B=y -+CONFIG_MMU=y -+CONFIG_PERFORMANCE_COUNTERS=y -+CONFIG_PORTMUX_PIO=y -+CONFIG_PLATFORM_AT32AP=y -+CONFIG_CPU_AT32AP700X=y -+CONFIG_CPU_AT32AP7000=y -+# CONFIG_BOARD_ATSTK1000 is not set -+CONFIG_BOARD_ATNGW100=y -+# CONFIG_BOARD_FAVR_32 is not set -+# CONFIG_BOARD_MIMC200 is not set -+CONFIG_BOARD_ATNGW100_EVKLCD10X=y -+# CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA is not set -+CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA=y -+# CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA is not set -+CONFIG_LOADER_U_BOOT=y -+ -+# -+# Atmel AVR32 AP options -+# -+# CONFIG_AP700X_32_BIT_SMC is not set -+CONFIG_AP700X_16_BIT_SMC=y -+# CONFIG_AP700X_8_BIT_SMC is not set -+CONFIG_LOAD_ADDRESS=0x10000000 -+CONFIG_ENTRY_ADDRESS=0x90000000 -+CONFIG_PHYS_OFFSET=0x10000000 -+CONFIG_PREEMPT_NONE=y -+# CONFIG_PREEMPT_VOLUNTARY is not set -+# CONFIG_PREEMPT is not set -+CONFIG_QUICKLIST=y -+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set -+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set -+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set -+CONFIG_ARCH_FLATMEM_ENABLE=y -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -+CONFIG_PAGEFLAGS_EXTENDED=y -+CONFIG_SPLIT_PTLOCK_CPUS=4 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=0 -+CONFIG_NR_QUICK=2 -+CONFIG_VIRT_TO_BUS=y -+# CONFIG_OWNERSHIP_TRACE is not set -+CONFIG_NMI_DEBUGGING=y -+# CONFIG_HZ_100 is not set -+CONFIG_HZ_250=y -+# CONFIG_HZ_300 is not set -+# CONFIG_HZ_1000 is not set -+CONFIG_HZ=250 -+CONFIG_SCHED_HRTICK=y -+CONFIG_CMDLINE="" -+ -+# -+# Power management options -+# -+CONFIG_PM=y -+# CONFIG_PM_DEBUG is not set -+CONFIG_PM_SLEEP=y -+CONFIG_SUSPEND=y -+CONFIG_SUSPEND_FREEZER=y -+CONFIG_ARCH_SUSPEND_POSSIBLE=y -+ -+# -+# CPU Frequency scaling -+# -+CONFIG_CPU_FREQ=y -+CONFIG_CPU_FREQ_TABLE=y -+# CONFIG_CPU_FREQ_DEBUG is not set -+# CONFIG_CPU_FREQ_STAT is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -+CONFIG_CPU_FREQ_GOV_USERSPACE=y -+CONFIG_CPU_FREQ_GOV_ONDEMAND=y -+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_AT32AP=y -+ -+# -+# Bus options -+# -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+# CONFIG_PCCARD is not set -+ -+# -+# Executable file formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_MISC is not set -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+CONFIG_PACKET_MMAP=y -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+CONFIG_XFRM_USER=y -+# CONFIG_XFRM_SUB_POLICY is not set -+# CONFIG_XFRM_MIGRATE is not set -+# CONFIG_XFRM_STATISTICS is not set -+CONFIG_XFRM_IPCOMP=y -+CONFIG_NET_KEY=y -+# CONFIG_NET_KEY_MIGRATE is not set -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+CONFIG_IP_ADVANCED_ROUTER=y -+CONFIG_ASK_IP_FIB_HASH=y -+# CONFIG_IP_FIB_TRIE is not set -+CONFIG_IP_FIB_HASH=y -+# CONFIG_IP_MULTIPLE_TABLES is not set -+# CONFIG_IP_ROUTE_MULTIPATH is not set -+# CONFIG_IP_ROUTE_VERBOSE is not set -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+CONFIG_IP_MROUTE=y -+CONFIG_IP_PIMSM_V1=y -+# CONFIG_IP_PIMSM_V2 is not set -+# CONFIG_ARPD is not set -+CONFIG_SYN_COOKIES=y -+CONFIG_INET_AH=y -+CONFIG_INET_ESP=y -+CONFIG_INET_IPCOMP=y -+CONFIG_INET_XFRM_TUNNEL=y -+CONFIG_INET_TUNNEL=y -+CONFIG_INET_XFRM_MODE_TRANSPORT=y -+CONFIG_INET_XFRM_MODE_TUNNEL=y -+CONFIG_INET_XFRM_MODE_BEET=y -+# CONFIG_INET_LRO is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set -+# CONFIG_IP_VS is not set -+CONFIG_IPV6=y -+# CONFIG_IPV6_PRIVACY is not set -+# CONFIG_IPV6_ROUTER_PREF is not set -+# CONFIG_IPV6_OPTIMISTIC_DAD is not set -+CONFIG_INET6_AH=y -+CONFIG_INET6_ESP=y -+CONFIG_INET6_IPCOMP=y -+# CONFIG_IPV6_MIP6 is not set -+CONFIG_INET6_XFRM_TUNNEL=y -+CONFIG_INET6_TUNNEL=y -+CONFIG_INET6_XFRM_MODE_TRANSPORT=y -+CONFIG_INET6_XFRM_MODE_TUNNEL=y -+CONFIG_INET6_XFRM_MODE_BEET=y -+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -+CONFIG_IPV6_SIT=y -+CONFIG_IPV6_NDISC_NODETYPE=y -+# CONFIG_IPV6_TUNNEL is not set -+# CONFIG_IPV6_MULTIPLE_TABLES is not set -+# CONFIG_IPV6_MROUTE is not set -+# CONFIG_NETWORK_SECMARK is not set -+CONFIG_NETFILTER=y -+# CONFIG_NETFILTER_DEBUG is not set -+# CONFIG_NETFILTER_ADVANCED is not set -+ -+# -+# Core Netfilter Configuration -+# -+CONFIG_NETFILTER_NETLINK=m -+CONFIG_NETFILTER_NETLINK_LOG=m -+CONFIG_NF_CONNTRACK=m -+CONFIG_NF_CONNTRACK_FTP=m -+CONFIG_NF_CONNTRACK_IRC=m -+CONFIG_NF_CONNTRACK_SIP=m -+CONFIG_NF_CT_NETLINK=m -+CONFIG_NETFILTER_XTABLES=y -+CONFIG_NETFILTER_XT_TARGET_MARK=m -+CONFIG_NETFILTER_XT_TARGET_NFLOG=m -+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -+CONFIG_NETFILTER_XT_MATCH_MARK=m -+CONFIG_NETFILTER_XT_MATCH_POLICY=m -+CONFIG_NETFILTER_XT_MATCH_STATE=m -+ -+# -+# IP: Netfilter Configuration -+# -+CONFIG_NF_CONNTRACK_IPV4=m -+CONFIG_NF_CONNTRACK_PROC_COMPAT=y -+CONFIG_IP_NF_IPTABLES=m -+CONFIG_IP_NF_FILTER=m -+CONFIG_IP_NF_TARGET_REJECT=m -+CONFIG_IP_NF_TARGET_LOG=m -+# CONFIG_IP_NF_TARGET_ULOG is not set -+CONFIG_NF_NAT=m -+CONFIG_NF_NAT_NEEDED=y -+CONFIG_IP_NF_TARGET_MASQUERADE=m -+CONFIG_NF_NAT_FTP=m -+CONFIG_NF_NAT_IRC=m -+# CONFIG_NF_NAT_TFTP is not set -+# CONFIG_NF_NAT_AMANDA is not set -+# CONFIG_NF_NAT_PPTP is not set -+# CONFIG_NF_NAT_H323 is not set -+CONFIG_NF_NAT_SIP=m -+CONFIG_IP_NF_MANGLE=m -+ -+# -+# IPv6: Netfilter Configuration -+# -+CONFIG_NF_CONNTRACK_IPV6=m -+CONFIG_IP6_NF_IPTABLES=m -+CONFIG_IP6_NF_MATCH_IPV6HEADER=m -+CONFIG_IP6_NF_FILTER=m -+CONFIG_IP6_NF_TARGET_LOG=m -+CONFIG_IP6_NF_TARGET_REJECT=m -+CONFIG_IP6_NF_MANGLE=m -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+CONFIG_STP=m -+CONFIG_BRIDGE=m -+CONFIG_VLAN_8021Q=m -+# CONFIG_VLAN_8021Q_GVRP is not set -+# CONFIG_DECNET is not set -+CONFIG_LLC=m -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_NET_TCPPROBE is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_CAN is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_EXT is not set -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+CONFIG_STANDALONE=y -+# CONFIG_PREVENT_FIRMWARE_BUILD is not set -+# CONFIG_FW_LOADER is not set -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+# CONFIG_CONNECTOR is not set -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AR7_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_GEN_PROBE=y -+# CONFIG_MTD_CFI_ADV_OPTIONS is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+# CONFIG_MTD_CFI_INTELEXT is not set -+CONFIG_MTD_CFI_AMDSTD=y -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+CONFIG_MTD_PHYSMAP=y -+CONFIG_MTD_PHYSMAP_START=0x80000000 -+CONFIG_MTD_PHYSMAP_LEN=0x0 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+CONFIG_MTD_DATAFLASH=y -+# CONFIG_MTD_M25P80 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+# CONFIG_MTD_NAND is not set -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+CONFIG_MTD_UBI=y -+CONFIG_MTD_UBI_WL_THRESHOLD=4096 -+CONFIG_MTD_UBI_BEB_RESERVE=1 -+# CONFIG_MTD_UBI_GLUEBI is not set -+ -+# -+# UBI debugging options -+# -+# CONFIG_MTD_UBI_DEBUG is not set -+# CONFIG_PARPORT is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=m -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+CONFIG_BLK_DEV_NBD=m -+CONFIG_BLK_DEV_RAM=m -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=4096 -+# CONFIG_BLK_DEV_XIP is not set -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_ATMEL_PWM is not set -+CONFIG_ATMEL_TCLIB=y -+CONFIG_ATMEL_TCB_CLKSRC=y -+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 -+# CONFIG_EEPROM_93CX6 is not set -+# CONFIG_ATMEL_SSC is not set -+# CONFIG_ENCLOSURE_SERVICES is not set -+# CONFIG_HAVE_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+# CONFIG_SCSI is not set -+# CONFIG_SCSI_DMA is not set -+# CONFIG_SCSI_NETLINK is not set -+# CONFIG_ATA is not set -+# CONFIG_MD is not set -+CONFIG_NETDEVICES=y -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+# CONFIG_VETH is not set -+CONFIG_PHYLIB=y -+ -+# -+# MII PHY device drivers -+# -+# CONFIG_MARVELL_PHY is not set -+# CONFIG_DAVICOM_PHY is not set -+# CONFIG_QSEMI_PHY is not set -+# CONFIG_LXT_PHY is not set -+# CONFIG_CICADA_PHY is not set -+# CONFIG_VITESSE_PHY is not set -+# CONFIG_SMSC_PHY is not set -+# CONFIG_BROADCOM_PHY is not set -+# CONFIG_ICPLUS_PHY is not set -+# CONFIG_REALTEK_PHY is not set -+# CONFIG_FIXED_PHY is not set -+# CONFIG_MDIO_BITBANG is not set -+CONFIG_NET_ETHERNET=y -+# CONFIG_MII is not set -+CONFIG_MACB=y -+# CONFIG_ENC28J60 is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_B44 is not set -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+# CONFIG_IWLWIFI_LEDS is not set -+# CONFIG_WAN is not set -+CONFIG_PPP=m -+# CONFIG_PPP_MULTILINK is not set -+CONFIG_PPP_FILTER=y -+CONFIG_PPP_ASYNC=m -+# CONFIG_PPP_SYNC_TTY is not set -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_BSDCOMP=m -+CONFIG_PPP_MPPE=m -+CONFIG_PPPOE=m -+# CONFIG_PPPOL2TP is not set -+# CONFIG_SLIP is not set -+CONFIG_SLHC=m -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+# CONFIG_PHONE is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+# CONFIG_INPUT_POLLDEV is not set -+ -+# -+# Userland interfaces -+# -+# CONFIG_INPUT_MOUSEDEV is not set -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=m -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+# CONFIG_INPUT_KEYBOARD is not set -+# CONFIG_INPUT_MOUSE is not set -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+CONFIG_INPUT_TOUCHSCREEN=y -+# CONFIG_TOUCHSCREEN_ADS7846 is not set -+# CONFIG_TOUCHSCREEN_FUJITSU is not set -+# CONFIG_TOUCHSCREEN_GUNZE is not set -+# CONFIG_TOUCHSCREEN_ELO is not set -+# CONFIG_TOUCHSCREEN_MTOUCH is not set -+# CONFIG_TOUCHSCREEN_INEXIO is not set -+# CONFIG_TOUCHSCREEN_MK712 is not set -+# CONFIG_TOUCHSCREEN_PENMOUNT is not set -+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -+# CONFIG_TOUCHSCREEN_UCB1400 is not set -+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set -+# CONFIG_INPUT_MISC is not set -+ -+# -+# Hardware I/O ports -+# -+# CONFIG_SERIO is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_CONSOLE_TRANSLATIONS=y -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+CONFIG_DEVKMEM=y -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_ATMEL=y -+CONFIG_SERIAL_ATMEL_CONSOLE=y -+CONFIG_SERIAL_ATMEL_PDC=y -+# CONFIG_SERIAL_ATMEL_TTYAT is not set -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=m -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=m -+CONFIG_I2C_HELPER_AUTO=y -+CONFIG_I2C_ALGOBIT=m -+ -+# -+# I2C Hardware Bus support -+# -+ -+# -+# I2C system bus drivers (mostly embedded / system-on-chip) -+# -+CONFIG_I2C_GPIO=m -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_SIMTEC is not set -+ -+# -+# External I2C/SMBus adapter drivers -+# -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_TAOS_EVM is not set -+ -+# -+# Other I2C/SMBus bus drivers -+# -+# CONFIG_I2C_PCA_PLATFORM is not set -+# CONFIG_I2C_STUB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_DS1682 is not set -+# CONFIG_AT24 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_PCF8575 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_TPS65010 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+CONFIG_SPI_ATMEL_HAVE_PDC=y -+CONFIG_SPI_ATMEL=y -+# CONFIG_SPI_BITBANG is not set -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+CONFIG_SPI_SPIDEV=m -+# CONFIG_SPI_TLE62X0 is not set -+CONFIG_ARCH_REQUIRE_GPIOLIB=y -+CONFIG_GPIOLIB=y -+# CONFIG_DEBUG_GPIO is not set -+# CONFIG_GPIO_SYSFS is not set -+ -+# -+# I2C GPIO expanders: -+# -+# CONFIG_GPIO_MAX732X is not set -+# CONFIG_GPIO_PCA953X is not set -+# CONFIG_GPIO_PCF857X is not set -+ -+# -+# PCI GPIO expanders: -+# -+ -+# -+# SPI GPIO expanders: -+# -+# CONFIG_GPIO_MAX7301 is not set -+# CONFIG_GPIO_MCP23S08 is not set -+# CONFIG_W1 is not set -+# CONFIG_POWER_SUPPLY is not set -+# CONFIG_HWMON is not set -+# CONFIG_THERMAL is not set -+# CONFIG_THERMAL_HWMON is not set -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_AT32_WDT=y -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_CORE is not set -+# CONFIG_MFD_SM501 is not set -+# CONFIG_HTC_PASIC3 is not set -+# CONFIG_MFD_TMIO is not set -+ -+# -+# Multimedia devices -+# -+ -+# -+# Multimedia core support -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+# CONFIG_VIDEO_MEDIA is not set -+ -+# -+# Multimedia drivers -+# -+# CONFIG_DAB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+CONFIG_FB=y -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB_DDC is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_FOREIGN_ENDIAN is not set -+# CONFIG_FB_SYS_FOPS is not set -+# CONFIG_FB_SVGALIB is not set -+# CONFIG_FB_MACMODES is not set -+# CONFIG_FB_BACKLIGHT is not set -+# CONFIG_FB_MODE_HELPERS is not set -+# CONFIG_FB_TILEBLITTING is not set -+ -+# -+# Frame buffer hardware drivers -+# -+# CONFIG_FB_S1D13XXX is not set -+CONFIG_FB_ATMEL=y -+# CONFIG_FB_ATMEL_MPOP is not set -+# CONFIG_FB_VIRTUAL is not set -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+ -+# -+# Console display driver support -+# -+CONFIG_DUMMY_CONSOLE=y -+# CONFIG_FRAMEBUFFER_CONSOLE is not set -+# CONFIG_LOGO is not set -+CONFIG_SOUND=y -+CONFIG_SND=y -+CONFIG_SND_TIMER=m -+CONFIG_SND_PCM=m -+# CONFIG_SND_SEQUENCER is not set -+CONFIG_SND_OSSEMUL=y -+CONFIG_SND_MIXER_OSS=m -+CONFIG_SND_PCM_OSS=m -+CONFIG_SND_PCM_OSS_PLUGINS=y -+# CONFIG_SND_DYNAMIC_MINORS is not set -+# CONFIG_SND_SUPPORT_OLD_API is not set -+CONFIG_SND_VERBOSE_PROCFS=y -+# CONFIG_SND_VERBOSE_PRINTK is not set -+# CONFIG_SND_DEBUG is not set -+CONFIG_SND_DRIVERS=y -+# CONFIG_SND_DUMMY is not set -+# CONFIG_SND_MTPAV is not set -+# CONFIG_SND_SERIAL_U16550 is not set -+# CONFIG_SND_MPU401 is not set -+CONFIG_SND_SPI=y -+# CONFIG_SND_SOC is not set -+# CONFIG_SOUND_PRIME is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+# CONFIG_HID_DEBUG is not set -+# CONFIG_HIDRAW is not set -+CONFIG_USB_SUPPORT=y -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+CONFIG_USB_ARCH_HAS_EHCI=y -+# CONFIG_USB is not set -+# CONFIG_USB_OTG_WHITELIST is not set -+# CONFIG_USB_OTG_BLACKLIST_HUB is not set -+# CONFIG_USB_MUSB_HDRC is not set -+# CONFIG_USB_GADGET_MUSB_HDRC is not set -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+CONFIG_USB_GADGET_ATMEL_USBA=y -+CONFIG_USB_ATMEL_USBA=y -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA25X is not set -+# CONFIG_USB_GADGET_M66592 is not set -+# CONFIG_USB_GADGET_PXA27X is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_S3C2410 is not set -+# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+CONFIG_USB_GADGET_DUALSPEED=y -+CONFIG_USB_ZERO=m -+CONFIG_USB_ETH=m -+CONFIG_USB_ETH_RNDIS=y -+CONFIG_USB_GADGETFS=m -+CONFIG_USB_FILE_STORAGE=m -+# CONFIG_USB_FILE_STORAGE_TEST is not set -+CONFIG_USB_G_SERIAL=m -+# CONFIG_USB_MIDI_GADGET is not set -+# CONFIG_USB_G_PRINTER is not set -+# CONFIG_USB_CDC_COMPOSITE is not set -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+# CONFIG_MMC_UNSAFE_RESUME is not set -+ -+# -+# MMC/SD Card Drivers -+# -+CONFIG_MMC_BLOCK=y -+CONFIG_MMC_BLOCK_BOUNCE=y -+# CONFIG_SDIO_UART is not set -+# CONFIG_MMC_TEST is not set -+ -+# -+# MMC/SD Host Controller Drivers -+# -+# CONFIG_MMC_SDHCI is not set -+CONFIG_MMC_ATMELMCI=y -+# CONFIG_MMC_SPI is not set -+# CONFIG_MEMSTICK is not set -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=y -+ -+# -+# LED drivers -+# -+# CONFIG_LEDS_PCA9532 is not set -+CONFIG_LEDS_GPIO=y -+# CONFIG_LEDS_PCA955X is not set -+ -+# -+# LED Triggers -+# -+CONFIG_LEDS_TRIGGERS=y -+CONFIG_LEDS_TRIGGER_TIMER=y -+CONFIG_LEDS_TRIGGER_HEARTBEAT=y -+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set -+# CONFIG_ACCESSIBILITY is not set -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+# CONFIG_RTC_DEBUG is not set -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+# CONFIG_RTC_DRV_S35390A is not set -+# CONFIG_RTC_DRV_FM3130 is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_M41T94 is not set -+# CONFIG_RTC_DRV_DS1305 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set -+# CONFIG_RTC_DRV_R9701 is not set -+# CONFIG_RTC_DRV_RS5C348 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_DS1511 is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_AT32AP700X=y -+# CONFIG_RTC_DRV_AVR32_AST is not set -+# CONFIG_DMADEVICES is not set -+# CONFIG_UIO is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+# CONFIG_EXT3_FS_XATTR is not set -+# CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=y -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_FS_POSIX_ACL is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_OCFS2_FS is not set -+# CONFIG_DNOTIFY is not set -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+CONFIG_FUSE_FS=m -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=m -+CONFIG_MSDOS_FS=m -+CONFIG_VFAT_FS=m -+CONFIG_FAT_DEFAULT_CODEPAGE=850 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+# CONFIG_PROC_KCORE is not set -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_CONFIGFS_FS=y -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -+# CONFIG_JFFS2_SUMMARY is not set -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+# CONFIG_JFFS2_LZO is not set -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+CONFIG_UBIFS_FS=y -+# CONFIG_UBIFS_FS_XATTR is not set -+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -+CONFIG_UBIFS_FS_LZO=y -+CONFIG_UBIFS_FS_ZLIB=y -+# CONFIG_UBIFS_FS_DEBUG is not set -+# CONFIG_CRAMFS is not set -+# CONFIG_VXFS_FS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_OMFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_ROMFS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+CONFIG_NETWORK_FILESYSTEMS=y -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3=y -+# CONFIG_NFS_V3_ACL is not set -+# CONFIG_NFS_V4 is not set -+CONFIG_ROOT_NFS=y -+CONFIG_NFSD=m -+CONFIG_NFSD_V3=y -+# CONFIG_NFSD_V3_ACL is not set -+# CONFIG_NFSD_V4 is not set -+CONFIG_LOCKD=y -+CONFIG_LOCKD_V4=y -+CONFIG_EXPORTFS=m -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+CONFIG_SMB_FS=m -+# CONFIG_SMB_NLS_DEFAULT is not set -+CONFIG_CIFS=m -+# CONFIG_CIFS_STATS is not set -+# CONFIG_CIFS_WEAK_PW_HASH is not set -+# CONFIG_CIFS_XATTR is not set -+# CONFIG_CIFS_DEBUG2 is not set -+# CONFIG_CIFS_EXPERIMENTAL is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+CONFIG_NLS=m -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=m -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+CONFIG_NLS_CODEPAGE_850=m -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=m -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=m -+# CONFIG_DLM is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y -+CONFIG_ENABLE_MUST_CHECK=y -+CONFIG_FRAME_WARN=1024 -+CONFIG_MAGIC_SYSRQ=y -+# CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+# CONFIG_DEBUG_SHIRQ is not set -+CONFIG_DETECT_SOFTLOCKUP=y -+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -+CONFIG_SCHED_DEBUG=y -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set -+# CONFIG_DEBUG_OBJECTS is not set -+# CONFIG_SLUB_DEBUG_ON is not set -+# CONFIG_SLUB_STATS is not set -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+# CONFIG_DEBUG_INFO is not set -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_WRITECOUNT is not set -+# CONFIG_DEBUG_MEMORY_INIT is not set -+# CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set -+CONFIG_FRAME_POINTER=y -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_KPROBES_SANITY_TEST is not set -+# CONFIG_BACKTRACE_SELF_TEST is not set -+# CONFIG_LKDTM is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+CONFIG_CRYPTO=y -+ -+# -+# Crypto core or helper -+# -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_AEAD=y -+CONFIG_CRYPTO_BLKCIPHER=y -+CONFIG_CRYPTO_HASH=y -+CONFIG_CRYPTO_MANAGER=y -+# CONFIG_CRYPTO_GF128MUL is not set -+# CONFIG_CRYPTO_NULL is not set -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_AUTHENC=y -+# CONFIG_CRYPTO_TEST is not set -+ -+# -+# Authenticated Encryption with Associated Data -+# -+# CONFIG_CRYPTO_CCM is not set -+# CONFIG_CRYPTO_GCM is not set -+# CONFIG_CRYPTO_SEQIV is not set -+ -+# -+# Block modes -+# -+CONFIG_CRYPTO_CBC=y -+# CONFIG_CRYPTO_CTR is not set -+# CONFIG_CRYPTO_CTS is not set -+CONFIG_CRYPTO_ECB=m -+# CONFIG_CRYPTO_LRW is not set -+# CONFIG_CRYPTO_PCBC is not set -+# CONFIG_CRYPTO_XTS is not set -+ -+# -+# Hash modes -+# -+CONFIG_CRYPTO_HMAC=y -+# CONFIG_CRYPTO_XCBC is not set -+ -+# -+# Digest -+# -+# CONFIG_CRYPTO_CRC32C is not set -+# CONFIG_CRYPTO_MD4 is not set -+CONFIG_CRYPTO_MD5=y -+# CONFIG_CRYPTO_MICHAEL_MIC is not set -+# CONFIG_CRYPTO_RMD128 is not set -+# CONFIG_CRYPTO_RMD160 is not set -+# CONFIG_CRYPTO_RMD256 is not set -+# CONFIG_CRYPTO_RMD320 is not set -+CONFIG_CRYPTO_SHA1=y -+# CONFIG_CRYPTO_SHA256 is not set -+# CONFIG_CRYPTO_SHA512 is not set -+# CONFIG_CRYPTO_TGR192 is not set -+# CONFIG_CRYPTO_WP512 is not set -+ -+# -+# Ciphers -+# -+# CONFIG_CRYPTO_AES is not set -+# CONFIG_CRYPTO_ANUBIS is not set -+CONFIG_CRYPTO_ARC4=m -+# CONFIG_CRYPTO_BLOWFISH is not set -+# CONFIG_CRYPTO_CAMELLIA is not set -+# CONFIG_CRYPTO_CAST5 is not set -+# CONFIG_CRYPTO_CAST6 is not set -+CONFIG_CRYPTO_DES=y -+# CONFIG_CRYPTO_FCRYPT is not set -+# CONFIG_CRYPTO_KHAZAD is not set -+# CONFIG_CRYPTO_SALSA20 is not set -+# CONFIG_CRYPTO_SEED is not set -+# CONFIG_CRYPTO_SERPENT is not set -+# CONFIG_CRYPTO_TEA is not set -+# CONFIG_CRYPTO_TWOFISH is not set -+ -+# -+# Compression -+# -+CONFIG_CRYPTO_DEFLATE=y -+CONFIG_CRYPTO_LZO=y -+CONFIG_CRYPTO_HW=y -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+# CONFIG_GENERIC_FIND_FIRST_BIT is not set -+# CONFIG_GENERIC_FIND_NEXT_BIT is not set -+CONFIG_CRC_CCITT=m -+CONFIG_CRC16=y -+# CONFIG_CRC_T10DIF is not set -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+# CONFIG_LIBCRC32C is not set -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_LZO_COMPRESS=y -+CONFIG_LZO_DECOMPRESS=y -+CONFIG_GENERIC_ALLOCATOR=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y -diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig -index 69fce6b..42829bb 100644 ---- a/arch/avr32/configs/atstk1002_defconfig -+++ b/arch/avr32/configs/atstk1002_defconfig -@@ -1,7 +1,7 @@ - # - # Automatically generated make config: don't edit --# Linux kernel version: 2.6.27-rc1 --# Mon Aug 4 16:02:27 2008 -+# Linux kernel version: 2.6.27.4 -+# Wed Nov 12 10:28:45 2008 - # - CONFIG_AVR32=y - CONFIG_GENERIC_GPIO=y -@@ -129,20 +129,24 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y - CONFIG_SUBARCH_AVR32B=y - CONFIG_MMU=y - CONFIG_PERFORMANCE_COUNTERS=y -+CONFIG_PORTMUX_PIO=y - CONFIG_PLATFORM_AT32AP=y - CONFIG_CPU_AT32AP700X=y - CONFIG_CPU_AT32AP7000=y - CONFIG_BOARD_ATSTK1000=y - # CONFIG_BOARD_ATNGW100 is not set -+# CONFIG_BOARD_FAVR_32 is not set -+# CONFIG_BOARD_MIMC200 is not set - CONFIG_BOARD_ATSTK1002=y - # CONFIG_BOARD_ATSTK1003 is not set - # CONFIG_BOARD_ATSTK1004 is not set -+# CONFIG_BOARD_ATSTK1005 is not set - # CONFIG_BOARD_ATSTK1006 is not set - # CONFIG_BOARD_ATSTK100X_CUSTOM is not set - # CONFIG_BOARD_ATSTK100X_SPI1 is not set --# CONFIG_BOARD_ATSTK1000_J2_LED is not set -+CONFIG_BOARD_ATSTK1000_J2_LED=y - # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set --# CONFIG_BOARD_ATSTK1000_J2_RGB is not set -+CONFIG_BOARD_ATSTK1000_J2_RGB=y - CONFIG_BOARD_ATSTK1000_EXTDAC=y - CONFIG_LOADER_U_BOOT=y - -@@ -186,7 +190,7 @@ CONFIG_HZ_250=y - # CONFIG_HZ_300 is not set - # CONFIG_HZ_1000 is not set - CONFIG_HZ=250 --# CONFIG_SCHED_HRTICK is not set -+CONFIG_SCHED_HRTICK=y - CONFIG_CMDLINE="" - - # -@@ -360,7 +364,8 @@ CONFIG_MTD_CMDLINE_PARTS=y - # - CONFIG_MTD_CHAR=y - CONFIG_MTD_BLKDEVS=y --CONFIG_MTD_BLOCK=y -+# CONFIG_MTD_BLOCK is not set -+# CONFIG_MTD_BLOCK_RO is not set - # CONFIG_FTL is not set - # CONFIG_NFTL is not set - # CONFIG_INFTL is not set -@@ -421,12 +426,23 @@ CONFIG_M25PXX_USE_FAST_READ=y - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOC2001PLUS is not set - # CONFIG_MTD_NAND is not set -+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set -+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set -+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set - # CONFIG_MTD_ONENAND is not set - - # - # UBI - Unsorted block images - # --# CONFIG_MTD_UBI is not set -+CONFIG_MTD_UBI=y -+CONFIG_MTD_UBI_WL_THRESHOLD=4096 -+CONFIG_MTD_UBI_BEB_RESERVE=1 -+# CONFIG_MTD_UBI_GLUEBI is not set -+ -+# -+# UBI debugging options -+# -+# CONFIG_MTD_UBI_DEBUG is not set - # CONFIG_PARPORT is not set - CONFIG_BLK_DEV=y - # CONFIG_BLK_DEV_COW_COMMON is not set -@@ -502,7 +518,7 @@ CONFIG_NETDEVICES=y - # CONFIG_BONDING is not set - # CONFIG_MACVLAN is not set - # CONFIG_EQUALIZER is not set --CONFIG_TUN=m -+# CONFIG_TUN is not set - # CONFIG_VETH is not set - CONFIG_PHYLIB=y - -@@ -561,7 +577,7 @@ CONFIG_SLHC=m - # - # Input device support - # --CONFIG_INPUT=m -+CONFIG_INPUT=y - # CONFIG_INPUT_FF_MEMLESS is not set - CONFIG_INPUT_POLLDEV=m - -@@ -590,6 +606,8 @@ CONFIG_KEYBOARD_GPIO=m - CONFIG_INPUT_MOUSE=y - # CONFIG_MOUSE_PS2 is not set - # CONFIG_MOUSE_SERIAL is not set -+# CONFIG_MOUSE_APPLETOUCH is not set -+# CONFIG_MOUSE_BCM5974 is not set - # CONFIG_MOUSE_VSXXXAA is not set - CONFIG_MOUSE_GPIO=m - # CONFIG_INPUT_JOYSTICK is not set -@@ -606,8 +624,12 @@ CONFIG_MOUSE_GPIO=m - # - # Character devices - # --# CONFIG_VT is not set --# CONFIG_DEVKMEM is not set -+CONFIG_VT=y -+CONFIG_CONSOLE_TRANSLATIONS=y -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+CONFIG_DEVKMEM=y - # CONFIG_SERIAL_NONSTANDARD is not set - - # -@@ -634,6 +656,7 @@ CONFIG_UNIX98_PTYS=y - CONFIG_I2C=m - CONFIG_I2C_BOARDINFO=y - CONFIG_I2C_CHARDEV=m -+CONFIG_I2C_HELPER_AUTO=y - CONFIG_I2C_ALGOBIT=m - - # -@@ -663,7 +686,7 @@ CONFIG_I2C_GPIO=m - # Miscellaneous I2C Chip support - # - # CONFIG_DS1682 is not set --CONFIG_AT24=m -+# CONFIG_AT24 is not set - # CONFIG_SENSORS_EEPROM is not set - # CONFIG_SENSORS_PCF8574 is not set - # CONFIG_PCF8575 is not set -@@ -683,6 +706,7 @@ CONFIG_SPI_MASTER=y - # - # SPI Master Controller Drivers - # -+CONFIG_SPI_ATMEL_HAVE_PDC=y - CONFIG_SPI_ATMEL=y - # CONFIG_SPI_BITBANG is not set - -@@ -725,7 +749,7 @@ CONFIG_WATCHDOG=y - # Watchdog Device Drivers - # - # CONFIG_SOFT_WATCHDOG is not set --CONFIG_AT32AP700X_WDT=y -+CONFIG_AT32_WDT=y - - # - # Sonics Silicon Backplane -@@ -739,6 +763,7 @@ CONFIG_SSB_POSSIBLE=y - # CONFIG_MFD_CORE is not set - # CONFIG_MFD_SM501 is not set - # CONFIG_HTC_PASIC3 is not set -+# CONFIG_MFD_TMIO is not set - - # - # Multimedia devices -@@ -784,6 +809,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y - # - # CONFIG_FB_S1D13XXX is not set - CONFIG_FB_ATMEL=y -+# CONFIG_FB_ATMEL_MPOP is not set - # CONFIG_FB_VIRTUAL is not set - CONFIG_BACKLIGHT_LCD_SUPPORT=y - CONFIG_LCD_CLASS_DEVICE=y -@@ -797,6 +823,12 @@ CONFIG_LCD_LTV350QV=y - # Display device support - # - # CONFIG_DISPLAY_SUPPORT is not set -+ -+# -+# Console display driver support -+# -+CONFIG_DUMMY_CONSOLE=y -+# CONFIG_FRAMEBUFFER_CONSOLE is not set - # CONFIG_LOGO is not set - CONFIG_SOUND=m - CONFIG_SND=m -@@ -820,11 +852,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000 - # CONFIG_SOUND_PRIME is not set - # CONFIG_HID_SUPPORT is not set - CONFIG_USB_SUPPORT=y --# CONFIG_USB_ARCH_HAS_HCD is not set --# CONFIG_USB_ARCH_HAS_OHCI is not set --# CONFIG_USB_ARCH_HAS_EHCI is not set -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+CONFIG_USB_ARCH_HAS_EHCI=y -+# CONFIG_USB is not set - # CONFIG_USB_OTG_WHITELIST is not set - # CONFIG_USB_OTG_BLACKLIST_HUB is not set -+# CONFIG_USB_MUSB_HDRC is not set -+# CONFIG_USB_GADGET_MUSB_HDRC is not set - - # - # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -@@ -876,6 +911,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y - # - # CONFIG_MMC_SDHCI is not set - CONFIG_MMC_ATMELMCI=y -+# CONFIG_MMC_ATMELMCI_DMA is not set - CONFIG_MMC_SPI=m - # CONFIG_MEMSTICK is not set - CONFIG_NEW_LEDS=y -@@ -952,11 +988,13 @@ CONFIG_RTC_INTF_DEV=y - # on-CPU RTC drivers - # - CONFIG_RTC_DRV_AT32AP700X=y -+# CONFIG_RTC_DRV_AVR32_AST is not set - CONFIG_DMADEVICES=y - - # - # DMA Devices - # -+# CONFIG_ATMEL_PDCA is not set - CONFIG_DW_DMAC=y - CONFIG_DMA_ENGINE=y - -@@ -1017,7 +1055,7 @@ CONFIG_SYSFS=y - CONFIG_TMPFS=y - # CONFIG_TMPFS_POSIX_ACL is not set - # CONFIG_HUGETLB_PAGE is not set --# CONFIG_CONFIGFS_FS is not set -+CONFIG_CONFIGFS_FS=y - - # - # Miscellaneous filesystems -@@ -1031,7 +1069,8 @@ CONFIG_TMPFS=y - # CONFIG_EFS_FS is not set - CONFIG_JFFS2_FS=y - CONFIG_JFFS2_FS_DEBUG=0 --# CONFIG_JFFS2_FS_WRITEBUFFER is not set -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set - # CONFIG_JFFS2_SUMMARY is not set - # CONFIG_JFFS2_FS_XATTR is not set - # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -@@ -1039,6 +1078,12 @@ CONFIG_JFFS2_ZLIB=y - # CONFIG_JFFS2_LZO is not set - CONFIG_JFFS2_RTIME=y - # CONFIG_JFFS2_RUBIN is not set -+CONFIG_UBIFS_FS=y -+CONFIG_UBIFS_FS_XATTR=y -+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -+CONFIG_UBIFS_FS_LZO=y -+CONFIG_UBIFS_FS_ZLIB=y -+# CONFIG_UBIFS_FS_DEBUG is not set - # CONFIG_CRAMFS is not set - # CONFIG_VXFS_FS is not set - CONFIG_MINIX_FS=m -@@ -1173,7 +1218,7 @@ CONFIG_CRYPTO=y - # - # Crypto core or helper - # --CONFIG_CRYPTO_ALGAPI=m -+CONFIG_CRYPTO_ALGAPI=y - CONFIG_CRYPTO_AEAD=m - CONFIG_CRYPTO_BLKCIPHER=m - CONFIG_CRYPTO_HASH=m -@@ -1247,8 +1292,8 @@ CONFIG_CRYPTO_DES=m - # - # Compression - # --CONFIG_CRYPTO_DEFLATE=m --# CONFIG_CRYPTO_LZO is not set -+CONFIG_CRYPTO_DEFLATE=y -+CONFIG_CRYPTO_LZO=y - # CONFIG_CRYPTO_HW is not set - - # -@@ -1258,7 +1303,7 @@ CONFIG_BITREVERSE=y - # CONFIG_GENERIC_FIND_FIRST_BIT is not set - # CONFIG_GENERIC_FIND_NEXT_BIT is not set - CONFIG_CRC_CCITT=m --# CONFIG_CRC16 is not set -+CONFIG_CRC16=y - CONFIG_CRC_T10DIF=m - CONFIG_CRC_ITU_T=m - CONFIG_CRC32=y -@@ -1266,6 +1311,8 @@ CONFIG_CRC7=m - # CONFIG_LIBCRC32C is not set - CONFIG_ZLIB_INFLATE=y - CONFIG_ZLIB_DEFLATE=y -+CONFIG_LZO_COMPRESS=y -+CONFIG_LZO_DECOMPRESS=y - CONFIG_GENERIC_ALLOCATOR=y - CONFIG_PLIST=y - CONFIG_HAS_IOMEM=y -diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig -index 5477ed3..9eb129b 100644 ---- a/arch/avr32/configs/atstk1003_defconfig -+++ b/arch/avr32/configs/atstk1003_defconfig -@@ -1,7 +1,7 @@ - # - # Automatically generated make config: don't edit --# Linux kernel version: 2.6.27-rc1 --# Tue Aug 5 15:34:44 2008 -+# Linux kernel version: 2.6.27.4 -+# Wed Nov 12 10:33:33 2008 - # - CONFIG_AVR32=y - CONFIG_GENERIC_GPIO=y -@@ -34,12 +34,9 @@ CONFIG_SWAP=y - CONFIG_SYSVIPC=y - CONFIG_SYSVIPC_SYSCTL=y - CONFIG_POSIX_MQUEUE=y --CONFIG_BSD_PROCESS_ACCT=y --CONFIG_BSD_PROCESS_ACCT_V3=y --CONFIG_TASKSTATS=y --CONFIG_TASK_DELAY_ACCT=y --# CONFIG_TASK_XACCT is not set --CONFIG_AUDIT=y -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_AUDIT is not set - # CONFIG_IKCONFIG is not set - CONFIG_LOG_BUF_SHIFT=14 - # CONFIG_CGROUPS is not set -@@ -71,7 +68,7 @@ CONFIG_TIMERFD=y - CONFIG_EVENTFD=y - CONFIG_SHMEM=y - CONFIG_VM_EVENT_COUNTERS=y --# CONFIG_SLUB_DEBUG is not set -+CONFIG_SLUB_DEBUG=y - # CONFIG_SLAB is not set - CONFIG_SLUB=y - # CONFIG_SLOB is not set -@@ -90,6 +87,7 @@ CONFIG_HAVE_KPROBES=y - CONFIG_HAVE_CLK=y - CONFIG_PROC_PAGE_MONITOR=y - # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -+CONFIG_SLABINFO=y - CONFIG_RT_MUTEXES=y - # CONFIG_TINY_SHMEM is not set - CONFIG_BASE_SMALL=1 -@@ -131,20 +129,24 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y - CONFIG_SUBARCH_AVR32B=y - CONFIG_MMU=y - CONFIG_PERFORMANCE_COUNTERS=y -+CONFIG_PORTMUX_PIO=y - CONFIG_PLATFORM_AT32AP=y - CONFIG_CPU_AT32AP700X=y - CONFIG_CPU_AT32AP7001=y - CONFIG_BOARD_ATSTK1000=y - # CONFIG_BOARD_ATNGW100 is not set -+# CONFIG_BOARD_FAVR_32 is not set -+# CONFIG_BOARD_MIMC200 is not set - # CONFIG_BOARD_ATSTK1002 is not set - CONFIG_BOARD_ATSTK1003=y - # CONFIG_BOARD_ATSTK1004 is not set -+# CONFIG_BOARD_ATSTK1005 is not set - # CONFIG_BOARD_ATSTK1006 is not set - # CONFIG_BOARD_ATSTK100X_CUSTOM is not set - # CONFIG_BOARD_ATSTK100X_SPI1 is not set --# CONFIG_BOARD_ATSTK1000_J2_LED is not set -+CONFIG_BOARD_ATSTK1000_J2_LED=y - # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set --# CONFIG_BOARD_ATSTK1000_J2_RGB is not set -+CONFIG_BOARD_ATSTK1000_J2_RGB=y - CONFIG_BOARD_ATSTK1000_EXTDAC=y - CONFIG_LOADER_U_BOOT=y - -@@ -188,7 +190,7 @@ CONFIG_HZ_250=y - # CONFIG_HZ_300 is not set - # CONFIG_HZ_1000 is not set - CONFIG_HZ=250 --# CONFIG_SCHED_HRTICK is not set -+CONFIG_SCHED_HRTICK=y - CONFIG_CMDLINE="" - - # -@@ -239,40 +241,71 @@ CONFIG_NET=y - CONFIG_PACKET=y - CONFIG_PACKET_MMAP=y - CONFIG_UNIX=y --# CONFIG_NET_KEY is not set -+CONFIG_XFRM=y -+CONFIG_XFRM_USER=m -+# CONFIG_XFRM_SUB_POLICY is not set -+# CONFIG_XFRM_MIGRATE is not set -+# CONFIG_XFRM_STATISTICS is not set -+CONFIG_XFRM_IPCOMP=m -+CONFIG_NET_KEY=m -+# CONFIG_NET_KEY_MIGRATE is not set - CONFIG_INET=y - # CONFIG_IP_MULTICAST is not set - # CONFIG_IP_ADVANCED_ROUTER is not set - CONFIG_IP_FIB_HASH=y --# CONFIG_IP_PNP is not set --# CONFIG_NET_IPIP is not set --# CONFIG_NET_IPGRE is not set -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+CONFIG_NET_IPIP=m -+CONFIG_NET_IPGRE=m - # CONFIG_ARPD is not set - # CONFIG_SYN_COOKIES is not set --# CONFIG_INET_AH is not set --# CONFIG_INET_ESP is not set -+CONFIG_INET_AH=m -+CONFIG_INET_ESP=m - # CONFIG_INET_IPCOMP is not set - # CONFIG_INET_XFRM_TUNNEL is not set --# CONFIG_INET_TUNNEL is not set --# CONFIG_INET_XFRM_MODE_TRANSPORT is not set --# CONFIG_INET_XFRM_MODE_TUNNEL is not set --# CONFIG_INET_XFRM_MODE_BEET is not set -+CONFIG_INET_TUNNEL=m -+CONFIG_INET_XFRM_MODE_TRANSPORT=m -+CONFIG_INET_XFRM_MODE_TUNNEL=m -+CONFIG_INET_XFRM_MODE_BEET=m - # CONFIG_INET_LRO is not set --# CONFIG_INET_DIAG is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y - # CONFIG_TCP_CONG_ADVANCED is not set - CONFIG_TCP_CONG_CUBIC=y - CONFIG_DEFAULT_TCP_CONG="cubic" - # CONFIG_TCP_MD5SIG is not set --# CONFIG_IPV6 is not set -+CONFIG_IPV6=m -+# CONFIG_IPV6_PRIVACY is not set -+# CONFIG_IPV6_ROUTER_PREF is not set -+# CONFIG_IPV6_OPTIMISTIC_DAD is not set -+CONFIG_INET6_AH=m -+CONFIG_INET6_ESP=m -+CONFIG_INET6_IPCOMP=m -+# CONFIG_IPV6_MIP6 is not set -+CONFIG_INET6_XFRM_TUNNEL=m -+CONFIG_INET6_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_TRANSPORT=m -+CONFIG_INET6_XFRM_MODE_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_BEET=m -+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -+CONFIG_IPV6_SIT=m -+CONFIG_IPV6_NDISC_NODETYPE=y -+CONFIG_IPV6_TUNNEL=m -+# CONFIG_IPV6_MULTIPLE_TABLES is not set -+# CONFIG_IPV6_MROUTE is not set - # CONFIG_NETWORK_SECMARK is not set - # CONFIG_NETFILTER is not set - # CONFIG_IP_DCCP is not set - # CONFIG_IP_SCTP is not set - # CONFIG_TIPC is not set - # CONFIG_ATM is not set --# CONFIG_BRIDGE is not set -+CONFIG_STP=m -+CONFIG_BRIDGE=m - # CONFIG_VLAN_8021Q is not set - # CONFIG_DECNET is not set -+CONFIG_LLC=m - # CONFIG_LLC2 is not set - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -@@ -331,7 +364,8 @@ CONFIG_MTD_CMDLINE_PARTS=y - # - CONFIG_MTD_CHAR=y - CONFIG_MTD_BLKDEVS=y --CONFIG_MTD_BLOCK=y -+# CONFIG_MTD_BLOCK is not set -+# CONFIG_MTD_BLOCK_RO is not set - # CONFIG_FTL is not set - # CONFIG_NFTL is not set - # CONFIG_INFTL is not set -@@ -397,7 +431,15 @@ CONFIG_M25PXX_USE_FAST_READ=y - # - # UBI - Unsorted block images - # --# CONFIG_MTD_UBI is not set -+CONFIG_MTD_UBI=y -+CONFIG_MTD_UBI_WL_THRESHOLD=4096 -+CONFIG_MTD_UBI_BEB_RESERVE=1 -+# CONFIG_MTD_UBI_GLUEBI is not set -+ -+# -+# UBI debugging options -+# -+# CONFIG_MTD_UBI_DEBUG is not set - # CONFIG_PARPORT is not set - CONFIG_BLK_DEV=y - # CONFIG_BLK_DEV_COW_COMMON is not set -@@ -458,9 +500,7 @@ CONFIG_SCSI_WAIT_SCAN=m - # CONFIG_SCSI_ISCSI_ATTRS is not set - # CONFIG_SCSI_SAS_LIBSAS is not set - # CONFIG_SCSI_SRP_ATTRS is not set --CONFIG_SCSI_LOWLEVEL=y --# CONFIG_ISCSI_TCP is not set --# CONFIG_SCSI_DEBUG is not set -+# CONFIG_SCSI_LOWLEVEL is not set - # CONFIG_SCSI_DH is not set - CONFIG_ATA=m - # CONFIG_ATA_NONSTANDARD is not set -@@ -477,7 +517,32 @@ CONFIG_NETDEVICES=y - # CONFIG_EQUALIZER is not set - # CONFIG_TUN is not set - # CONFIG_VETH is not set --# CONFIG_NET_ETHERNET is not set -+CONFIG_PHYLIB=y -+ -+# -+# MII PHY device drivers -+# -+# CONFIG_MARVELL_PHY is not set -+# CONFIG_DAVICOM_PHY is not set -+# CONFIG_QSEMI_PHY is not set -+# CONFIG_LXT_PHY is not set -+# CONFIG_CICADA_PHY is not set -+# CONFIG_VITESSE_PHY is not set -+# CONFIG_SMSC_PHY is not set -+# CONFIG_BROADCOM_PHY is not set -+# CONFIG_ICPLUS_PHY is not set -+# CONFIG_REALTEK_PHY is not set -+# CONFIG_FIXED_PHY is not set -+# CONFIG_MDIO_BITBANG is not set -+CONFIG_NET_ETHERNET=y -+# CONFIG_MII is not set -+CONFIG_MACB=y -+# CONFIG_ENC28J60 is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_B44 is not set - # CONFIG_NETDEV_1000 is not set - # CONFIG_NETDEV_10000 is not set - -@@ -509,7 +574,7 @@ CONFIG_SLHC=m - # - # Input device support - # --CONFIG_INPUT=m -+CONFIG_INPUT=y - # CONFIG_INPUT_FF_MEMLESS is not set - CONFIG_INPUT_POLLDEV=m - -@@ -521,7 +586,7 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y - CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 - CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 - # CONFIG_INPUT_JOYDEV is not set --# CONFIG_INPUT_EVDEV is not set -+CONFIG_INPUT_EVDEV=m - # CONFIG_INPUT_EVBUG is not set - - # -@@ -538,6 +603,8 @@ CONFIG_KEYBOARD_GPIO=m - CONFIG_INPUT_MOUSE=y - # CONFIG_MOUSE_PS2 is not set - # CONFIG_MOUSE_SERIAL is not set -+# CONFIG_MOUSE_APPLETOUCH is not set -+# CONFIG_MOUSE_BCM5974 is not set - # CONFIG_MOUSE_VSXXXAA is not set - CONFIG_MOUSE_GPIO=m - # CONFIG_INPUT_JOYSTICK is not set -@@ -555,7 +622,7 @@ CONFIG_MOUSE_GPIO=m - # Character devices - # - # CONFIG_VT is not set --# CONFIG_DEVKMEM is not set -+CONFIG_DEVKMEM=y - # CONFIG_SERIAL_NONSTANDARD is not set - - # -@@ -582,6 +649,7 @@ CONFIG_UNIX98_PTYS=y - CONFIG_I2C=m - CONFIG_I2C_BOARDINFO=y - CONFIG_I2C_CHARDEV=m -+CONFIG_I2C_HELPER_AUTO=y - CONFIG_I2C_ALGOBIT=m - - # -@@ -611,7 +679,7 @@ CONFIG_I2C_GPIO=m - # Miscellaneous I2C Chip support - # - # CONFIG_DS1682 is not set --CONFIG_AT24=m -+# CONFIG_AT24 is not set - # CONFIG_SENSORS_EEPROM is not set - # CONFIG_SENSORS_PCF8574 is not set - # CONFIG_PCF8575 is not set -@@ -631,6 +699,7 @@ CONFIG_SPI_MASTER=y - # - # SPI Master Controller Drivers - # -+CONFIG_SPI_ATMEL_HAVE_PDC=y - CONFIG_SPI_ATMEL=y - # CONFIG_SPI_BITBANG is not set - -@@ -673,7 +742,7 @@ CONFIG_WATCHDOG=y - # Watchdog Device Drivers - # - # CONFIG_SOFT_WATCHDOG is not set --CONFIG_AT32AP700X_WDT=y -+CONFIG_AT32_WDT=y - - # - # Sonics Silicon Backplane -@@ -687,6 +756,7 @@ CONFIG_SSB_POSSIBLE=y - # CONFIG_MFD_CORE is not set - # CONFIG_MFD_SM501 is not set - # CONFIG_HTC_PASIC3 is not set -+# CONFIG_MFD_TMIO is not set - - # - # Multimedia devices -@@ -726,8 +796,8 @@ CONFIG_SND_MIXER_OSS=m - CONFIG_SND_PCM_OSS=m - CONFIG_SND_PCM_OSS_PLUGINS=y - # CONFIG_SND_DYNAMIC_MINORS is not set --CONFIG_SND_SUPPORT_OLD_API=y --CONFIG_SND_VERBOSE_PROCFS=y -+# CONFIG_SND_SUPPORT_OLD_API is not set -+# CONFIG_SND_VERBOSE_PROCFS is not set - # CONFIG_SND_VERBOSE_PRINTK is not set - # CONFIG_SND_DEBUG is not set - # CONFIG_SND_DRIVERS is not set -@@ -738,11 +808,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000 - # CONFIG_SOUND_PRIME is not set - # CONFIG_HID_SUPPORT is not set - CONFIG_USB_SUPPORT=y --# CONFIG_USB_ARCH_HAS_HCD is not set --# CONFIG_USB_ARCH_HAS_OHCI is not set --# CONFIG_USB_ARCH_HAS_EHCI is not set -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+CONFIG_USB_ARCH_HAS_EHCI=y -+# CONFIG_USB is not set - # CONFIG_USB_OTG_WHITELIST is not set - # CONFIG_USB_OTG_BLACKLIST_HUB is not set -+# CONFIG_USB_MUSB_HDRC is not set -+# CONFIG_USB_GADGET_MUSB_HDRC is not set - - # - # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -@@ -750,7 +823,7 @@ CONFIG_USB_SUPPORT=y - CONFIG_USB_GADGET=y - # CONFIG_USB_GADGET_DEBUG is not set - # CONFIG_USB_GADGET_DEBUG_FILES is not set --CONFIG_USB_GADGET_DEBUG_FS=y -+# CONFIG_USB_GADGET_DEBUG_FS is not set - CONFIG_USB_GADGET_SELECTED=y - # CONFIG_USB_GADGET_AMD5536UDC is not set - CONFIG_USB_GADGET_ATMEL_USBA=y -@@ -787,33 +860,34 @@ CONFIG_MMC=y - CONFIG_MMC_BLOCK=y - CONFIG_MMC_BLOCK_BOUNCE=y - # CONFIG_SDIO_UART is not set --CONFIG_MMC_TEST=m -+# CONFIG_MMC_TEST is not set - - # - # MMC/SD Host Controller Drivers - # - # CONFIG_MMC_SDHCI is not set - CONFIG_MMC_ATMELMCI=y -+# CONFIG_MMC_ATMELMCI_DMA is not set - CONFIG_MMC_SPI=m - # CONFIG_MEMSTICK is not set - CONFIG_NEW_LEDS=y --CONFIG_LEDS_CLASS=y -+CONFIG_LEDS_CLASS=m - - # - # LED drivers - # - CONFIG_LEDS_ATMEL_PWM=m - # CONFIG_LEDS_PCA9532 is not set --CONFIG_LEDS_GPIO=y -+CONFIG_LEDS_GPIO=m - # CONFIG_LEDS_PCA955X is not set - - # - # LED Triggers - # - CONFIG_LEDS_TRIGGERS=y --CONFIG_LEDS_TRIGGER_TIMER=y --CONFIG_LEDS_TRIGGER_HEARTBEAT=y --CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -+CONFIG_LEDS_TRIGGER_TIMER=m -+CONFIG_LEDS_TRIGGER_HEARTBEAT=m -+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m - # CONFIG_ACCESSIBILITY is not set - CONFIG_RTC_LIB=y - CONFIG_RTC_CLASS=y -@@ -870,11 +944,13 @@ CONFIG_RTC_INTF_DEV=y - # on-CPU RTC drivers - # - CONFIG_RTC_DRV_AT32AP700X=y -+# CONFIG_RTC_DRV_AVR32_AST is not set - CONFIG_DMADEVICES=y - - # - # DMA Devices - # -+# CONFIG_ATMEL_PDCA is not set - CONFIG_DW_DMAC=y - CONFIG_DMA_ENGINE=y - -@@ -888,13 +964,13 @@ CONFIG_DMATEST=m - # - # File systems - # --CONFIG_EXT2_FS=m -+CONFIG_EXT2_FS=y - # CONFIG_EXT2_FS_XATTR is not set - # CONFIG_EXT2_FS_XIP is not set --CONFIG_EXT3_FS=m -+CONFIG_EXT3_FS=y - # CONFIG_EXT3_FS_XATTR is not set - # CONFIG_EXT4DEV_FS is not set --CONFIG_JBD=m -+CONFIG_JBD=y - # CONFIG_JBD_DEBUG is not set - # CONFIG_REISERFS_FS is not set - # CONFIG_JFS_FS is not set -@@ -935,7 +1011,7 @@ CONFIG_SYSFS=y - CONFIG_TMPFS=y - # CONFIG_TMPFS_POSIX_ACL is not set - # CONFIG_HUGETLB_PAGE is not set --CONFIG_CONFIGFS_FS=m -+CONFIG_CONFIGFS_FS=y - - # - # Miscellaneous filesystems -@@ -958,16 +1034,39 @@ CONFIG_JFFS2_ZLIB=y - # CONFIG_JFFS2_LZO is not set - CONFIG_JFFS2_RTIME=y - # CONFIG_JFFS2_RUBIN is not set -+CONFIG_UBIFS_FS=y -+CONFIG_UBIFS_FS_XATTR=y -+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -+CONFIG_UBIFS_FS_LZO=y -+CONFIG_UBIFS_FS_ZLIB=y -+# CONFIG_UBIFS_FS_DEBUG is not set - # CONFIG_CRAMFS is not set - # CONFIG_VXFS_FS is not set --# CONFIG_MINIX_FS is not set -+CONFIG_MINIX_FS=m - # CONFIG_OMFS_FS is not set - # CONFIG_HPFS_FS is not set - # CONFIG_QNX4FS_FS is not set - # CONFIG_ROMFS_FS is not set - # CONFIG_SYSV_FS is not set - # CONFIG_UFS_FS is not set --# CONFIG_NETWORK_FILESYSTEMS is not set -+CONFIG_NETWORK_FILESYSTEMS=y -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3=y -+# CONFIG_NFS_V3_ACL is not set -+# CONFIG_NFS_V4 is not set -+CONFIG_ROOT_NFS=y -+# CONFIG_NFSD is not set -+CONFIG_LOCKD=y -+CONFIG_LOCKD_V4=y -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set - - # - # Partition Types -@@ -1036,6 +1135,8 @@ CONFIG_SCHED_DEBUG=y - # CONFIG_SCHEDSTATS is not set - # CONFIG_TIMER_STATS is not set - # CONFIG_DEBUG_OBJECTS is not set -+# CONFIG_SLUB_DEBUG_ON is not set -+# CONFIG_SLUB_STATS is not set - # CONFIG_DEBUG_RT_MUTEXES is not set - # CONFIG_RT_MUTEX_TESTER is not set - # CONFIG_DEBUG_SPINLOCK is not set -@@ -1068,7 +1169,88 @@ CONFIG_FRAME_POINTER=y - # CONFIG_KEYS is not set - # CONFIG_SECURITY is not set - # CONFIG_SECURITY_FILE_CAPABILITIES is not set --# CONFIG_CRYPTO is not set -+CONFIG_CRYPTO=y -+ -+# -+# Crypto core or helper -+# -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_AEAD=m -+CONFIG_CRYPTO_BLKCIPHER=m -+CONFIG_CRYPTO_HASH=m -+CONFIG_CRYPTO_MANAGER=m -+# CONFIG_CRYPTO_GF128MUL is not set -+# CONFIG_CRYPTO_NULL is not set -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_AUTHENC=m -+# CONFIG_CRYPTO_TEST is not set -+ -+# -+# Authenticated Encryption with Associated Data -+# -+# CONFIG_CRYPTO_CCM is not set -+# CONFIG_CRYPTO_GCM is not set -+# CONFIG_CRYPTO_SEQIV is not set -+ -+# -+# Block modes -+# -+CONFIG_CRYPTO_CBC=m -+# CONFIG_CRYPTO_CTR is not set -+# CONFIG_CRYPTO_CTS is not set -+# CONFIG_CRYPTO_ECB is not set -+# CONFIG_CRYPTO_LRW is not set -+# CONFIG_CRYPTO_PCBC is not set -+# CONFIG_CRYPTO_XTS is not set -+ -+# -+# Hash modes -+# -+CONFIG_CRYPTO_HMAC=m -+# CONFIG_CRYPTO_XCBC is not set -+ -+# -+# Digest -+# -+# CONFIG_CRYPTO_CRC32C is not set -+# CONFIG_CRYPTO_MD4 is not set -+CONFIG_CRYPTO_MD5=m -+# CONFIG_CRYPTO_MICHAEL_MIC is not set -+# CONFIG_CRYPTO_RMD128 is not set -+# CONFIG_CRYPTO_RMD160 is not set -+# CONFIG_CRYPTO_RMD256 is not set -+# CONFIG_CRYPTO_RMD320 is not set -+CONFIG_CRYPTO_SHA1=m -+# CONFIG_CRYPTO_SHA256 is not set -+# CONFIG_CRYPTO_SHA512 is not set -+# CONFIG_CRYPTO_TGR192 is not set -+# CONFIG_CRYPTO_WP512 is not set -+ -+# -+# Ciphers -+# -+# CONFIG_CRYPTO_AES is not set -+# CONFIG_CRYPTO_ANUBIS is not set -+# CONFIG_CRYPTO_ARC4 is not set -+# CONFIG_CRYPTO_BLOWFISH is not set -+# CONFIG_CRYPTO_CAMELLIA is not set -+# CONFIG_CRYPTO_CAST5 is not set -+# CONFIG_CRYPTO_CAST6 is not set -+CONFIG_CRYPTO_DES=m -+# CONFIG_CRYPTO_FCRYPT is not set -+# CONFIG_CRYPTO_KHAZAD is not set -+# CONFIG_CRYPTO_SALSA20 is not set -+# CONFIG_CRYPTO_SEED is not set -+# CONFIG_CRYPTO_SERPENT is not set -+# CONFIG_CRYPTO_TEA is not set -+# CONFIG_CRYPTO_TWOFISH is not set -+ -+# -+# Compression -+# -+CONFIG_CRYPTO_DEFLATE=y -+CONFIG_CRYPTO_LZO=y -+# CONFIG_CRYPTO_HW is not set - - # - # Library routines -@@ -1077,15 +1259,16 @@ CONFIG_BITREVERSE=y - # CONFIG_GENERIC_FIND_FIRST_BIT is not set - # CONFIG_GENERIC_FIND_NEXT_BIT is not set - CONFIG_CRC_CCITT=m --# CONFIG_CRC16 is not set -+CONFIG_CRC16=y - CONFIG_CRC_T10DIF=m - CONFIG_CRC_ITU_T=m - CONFIG_CRC32=y - CONFIG_CRC7=m - # CONFIG_LIBCRC32C is not set --CONFIG_AUDIT_GENERIC=y - CONFIG_ZLIB_INFLATE=y - CONFIG_ZLIB_DEFLATE=y -+CONFIG_LZO_COMPRESS=y -+CONFIG_LZO_DECOMPRESS=y - CONFIG_GENERIC_ALLOCATOR=y - CONFIG_PLIST=y - CONFIG_HAS_IOMEM=y -diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig -index 69e6c0d..9f76e2a 100644 ---- a/arch/avr32/configs/atstk1004_defconfig -+++ b/arch/avr32/configs/atstk1004_defconfig -@@ -1,7 +1,7 @@ - # - # Automatically generated make config: don't edit --# Linux kernel version: 2.6.27-rc1 --# Tue Aug 5 15:38:56 2008 -+# Linux kernel version: 2.6.27.4 -+# Wed Nov 12 10:35:14 2008 - # - CONFIG_AVR32=y - CONFIG_GENERIC_GPIO=y -@@ -30,8 +30,10 @@ CONFIG_BROKEN_ON_SMP=y - CONFIG_INIT_ENV_ARG_LIMIT=32 - CONFIG_LOCALVERSION="" - # CONFIG_LOCALVERSION_AUTO is not set --# CONFIG_SYSVIPC is not set --# CONFIG_POSIX_MQUEUE is not set -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+CONFIG_POSIX_MQUEUE=y - # CONFIG_BSD_PROCESS_ACCT is not set - # CONFIG_TASKSTATS is not set - # CONFIG_AUDIT is not set -@@ -41,14 +43,16 @@ CONFIG_LOG_BUF_SHIFT=14 - # CONFIG_GROUP_SCHED is not set - CONFIG_SYSFS_DEPRECATED=y - CONFIG_SYSFS_DEPRECATED_V2=y --# CONFIG_RELAY is not set -+CONFIG_RELAY=y - # CONFIG_NAMESPACES is not set --# CONFIG_BLK_DEV_INITRD is not set -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" - CONFIG_CC_OPTIMIZE_FOR_SIZE=y - CONFIG_SYSCTL=y - CONFIG_EMBEDDED=y - # CONFIG_SYSCTL_SYSCALL is not set - CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_ALL is not set - # CONFIG_KALLSYMS_EXTRA_PASS is not set - CONFIG_HOTPLUG=y - CONFIG_PRINTK=y -@@ -56,19 +60,23 @@ CONFIG_BUG=y - CONFIG_ELF_CORE=y - # CONFIG_COMPAT_BRK is not set - # CONFIG_BASE_FULL is not set --# CONFIG_FUTEX is not set --# CONFIG_EPOLL is not set --# CONFIG_SIGNALFD is not set --# CONFIG_TIMERFD is not set --# CONFIG_EVENTFD is not set -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_TIMERFD=y -+CONFIG_EVENTFD=y - CONFIG_SHMEM=y - CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLUB_DEBUG=y - # CONFIG_SLAB is not set --# CONFIG_SLUB is not set --CONFIG_SLOB=y --# CONFIG_PROFILING is not set -+CONFIG_SLUB=y -+# CONFIG_SLOB is not set -+CONFIG_PROFILING=y - # CONFIG_MARKERS is not set -+CONFIG_OPROFILE=m - CONFIG_HAVE_OPROFILE=y -+CONFIG_KPROBES=y - # CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set - # CONFIG_HAVE_IOREMAP_PROT is not set - CONFIG_HAVE_KPROBES=y -@@ -77,36 +85,68 @@ CONFIG_HAVE_KPROBES=y - # CONFIG_HAVE_DMA_ATTRS is not set - # CONFIG_USE_GENERIC_SMP_HELPERS is not set - CONFIG_HAVE_CLK=y --# CONFIG_PROC_PAGE_MONITOR is not set -+CONFIG_PROC_PAGE_MONITOR=y - # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y - # CONFIG_TINY_SHMEM is not set - CONFIG_BASE_SMALL=1 --# CONFIG_MODULES is not set --# CONFIG_BLOCK is not set -+CONFIG_MODULES=y -+# CONFIG_MODULE_FORCE_LOAD is not set -+CONFIG_MODULE_UNLOAD=y -+# CONFIG_MODULE_FORCE_UNLOAD is not set -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+CONFIG_BLOCK=y -+# CONFIG_LBD is not set -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+# CONFIG_BLK_DEV_INTEGRITY is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+# CONFIG_IOSCHED_AS is not set -+# CONFIG_IOSCHED_DEADLINE is not set -+CONFIG_IOSCHED_CFQ=y -+# CONFIG_DEFAULT_AS is not set -+# CONFIG_DEFAULT_DEADLINE is not set -+CONFIG_DEFAULT_CFQ=y -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="cfq" - CONFIG_CLASSIC_RCU=y - - # - # System Type and features - # --# CONFIG_TICK_ONESHOT is not set --# CONFIG_NO_HZ is not set --# CONFIG_HIGH_RES_TIMERS is not set -+CONFIG_TICK_ONESHOT=y -+CONFIG_NO_HZ=y -+CONFIG_HIGH_RES_TIMERS=y - CONFIG_GENERIC_CLOCKEVENTS_BUILD=y - CONFIG_SUBARCH_AVR32B=y - CONFIG_MMU=y - CONFIG_PERFORMANCE_COUNTERS=y -+CONFIG_PORTMUX_PIO=y - CONFIG_PLATFORM_AT32AP=y - CONFIG_CPU_AT32AP700X=y - CONFIG_CPU_AT32AP7002=y - CONFIG_BOARD_ATSTK1000=y - # CONFIG_BOARD_ATNGW100 is not set -+# CONFIG_BOARD_FAVR_32 is not set -+# CONFIG_BOARD_MIMC200 is not set - # CONFIG_BOARD_ATSTK1002 is not set - # CONFIG_BOARD_ATSTK1003 is not set - CONFIG_BOARD_ATSTK1004=y -+# CONFIG_BOARD_ATSTK1005 is not set - # CONFIG_BOARD_ATSTK1006 is not set - # CONFIG_BOARD_ATSTK100X_CUSTOM is not set - # CONFIG_BOARD_ATSTK100X_SPI1 is not set --# CONFIG_BOARD_ATSTK1000_J2_LED is not set -+CONFIG_BOARD_ATSTK1000_J2_LED=y -+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set -+CONFIG_BOARD_ATSTK1000_J2_RGB=y - CONFIG_BOARD_ATSTK1000_EXTDAC=y - CONFIG_LOADER_U_BOOT=y - -@@ -144,25 +184,43 @@ CONFIG_ZONE_DMA_FLAG=0 - CONFIG_NR_QUICK=2 - CONFIG_VIRT_TO_BUS=y - # CONFIG_OWNERSHIP_TRACE is not set --# CONFIG_NMI_DEBUGGING is not set -+CONFIG_NMI_DEBUGGING=y - # CONFIG_HZ_100 is not set - CONFIG_HZ_250=y - # CONFIG_HZ_300 is not set - # CONFIG_HZ_1000 is not set - CONFIG_HZ=250 --# CONFIG_SCHED_HRTICK is not set -+CONFIG_SCHED_HRTICK=y - CONFIG_CMDLINE="" - - # - # Power management options - # --# CONFIG_PM is not set -+CONFIG_PM=y -+# CONFIG_PM_DEBUG is not set -+CONFIG_PM_SLEEP=y -+CONFIG_SUSPEND=y -+CONFIG_SUSPEND_FREEZER=y - CONFIG_ARCH_SUSPEND_POSSIBLE=y - - # - # CPU Frequency scaling - # --# CONFIG_CPU_FREQ is not set -+CONFIG_CPU_FREQ=y -+CONFIG_CPU_FREQ_TABLE=y -+# CONFIG_CPU_FREQ_DEBUG is not set -+# CONFIG_CPU_FREQ_STAT is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -+CONFIG_CPU_FREQ_GOV_USERSPACE=y -+CONFIG_CPU_FREQ_GOV_ONDEMAND=y -+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_AT32AP=y - - # - # Bus options -@@ -183,40 +241,71 @@ CONFIG_NET=y - CONFIG_PACKET=y - CONFIG_PACKET_MMAP=y - CONFIG_UNIX=y --# CONFIG_NET_KEY is not set -+CONFIG_XFRM=y -+CONFIG_XFRM_USER=m -+# CONFIG_XFRM_SUB_POLICY is not set -+# CONFIG_XFRM_MIGRATE is not set -+# CONFIG_XFRM_STATISTICS is not set -+CONFIG_XFRM_IPCOMP=m -+CONFIG_NET_KEY=m -+# CONFIG_NET_KEY_MIGRATE is not set - CONFIG_INET=y - # CONFIG_IP_MULTICAST is not set - # CONFIG_IP_ADVANCED_ROUTER is not set - CONFIG_IP_FIB_HASH=y --# CONFIG_IP_PNP is not set --# CONFIG_NET_IPIP is not set --# CONFIG_NET_IPGRE is not set -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+CONFIG_NET_IPIP=m -+CONFIG_NET_IPGRE=m - # CONFIG_ARPD is not set - # CONFIG_SYN_COOKIES is not set --# CONFIG_INET_AH is not set --# CONFIG_INET_ESP is not set -+CONFIG_INET_AH=m -+CONFIG_INET_ESP=m - # CONFIG_INET_IPCOMP is not set - # CONFIG_INET_XFRM_TUNNEL is not set --# CONFIG_INET_TUNNEL is not set --# CONFIG_INET_XFRM_MODE_TRANSPORT is not set --# CONFIG_INET_XFRM_MODE_TUNNEL is not set --# CONFIG_INET_XFRM_MODE_BEET is not set -+CONFIG_INET_TUNNEL=m -+CONFIG_INET_XFRM_MODE_TRANSPORT=m -+CONFIG_INET_XFRM_MODE_TUNNEL=m -+CONFIG_INET_XFRM_MODE_BEET=m - # CONFIG_INET_LRO is not set --# CONFIG_INET_DIAG is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y - # CONFIG_TCP_CONG_ADVANCED is not set - CONFIG_TCP_CONG_CUBIC=y - CONFIG_DEFAULT_TCP_CONG="cubic" - # CONFIG_TCP_MD5SIG is not set --# CONFIG_IPV6 is not set -+CONFIG_IPV6=m -+# CONFIG_IPV6_PRIVACY is not set -+# CONFIG_IPV6_ROUTER_PREF is not set -+# CONFIG_IPV6_OPTIMISTIC_DAD is not set -+CONFIG_INET6_AH=m -+CONFIG_INET6_ESP=m -+CONFIG_INET6_IPCOMP=m -+# CONFIG_IPV6_MIP6 is not set -+CONFIG_INET6_XFRM_TUNNEL=m -+CONFIG_INET6_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_TRANSPORT=m -+CONFIG_INET6_XFRM_MODE_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_BEET=m -+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -+CONFIG_IPV6_SIT=m -+CONFIG_IPV6_NDISC_NODETYPE=y -+CONFIG_IPV6_TUNNEL=m -+# CONFIG_IPV6_MULTIPLE_TABLES is not set -+# CONFIG_IPV6_MROUTE is not set - # CONFIG_NETWORK_SECMARK is not set - # CONFIG_NETFILTER is not set - # CONFIG_IP_DCCP is not set - # CONFIG_IP_SCTP is not set - # CONFIG_TIPC is not set - # CONFIG_ATM is not set --# CONFIG_BRIDGE is not set -+CONFIG_STP=m -+CONFIG_BRIDGE=m - # CONFIG_VLAN_8021Q is not set - # CONFIG_DECNET is not set -+CONFIG_LLC=m - # CONFIG_LLC2 is not set - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -@@ -230,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" - # Network testing - # - # CONFIG_NET_PKTGEN is not set -+# CONFIG_NET_TCPPROBE is not set - # CONFIG_HAMRADIO is not set - # CONFIG_CAN is not set - # CONFIG_IRDA is not set -@@ -257,6 +347,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" - CONFIG_STANDALONE=y - # CONFIG_PREVENT_FIRMWARE_BUILD is not set - # CONFIG_FW_LOADER is not set -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set - # CONFIG_SYS_HYPERVISOR is not set - # CONFIG_CONNECTOR is not set - CONFIG_MTD=y -@@ -271,6 +363,14 @@ CONFIG_MTD_CMDLINE_PARTS=y - # User Modules And Translation Layers - # - CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+# CONFIG_MTD_BLOCK is not set -+# CONFIG_MTD_BLOCK_RO is not set -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set - # CONFIG_MTD_OOPS is not set - - # -@@ -311,11 +411,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 - # - # Self-contained MTD device drivers - # --# CONFIG_MTD_DATAFLASH is not set --# CONFIG_MTD_M25P80 is not set -+CONFIG_MTD_DATAFLASH=m -+CONFIG_MTD_M25P80=m -+CONFIG_M25PXX_USE_FAST_READ=y - # CONFIG_MTD_SLRAM is not set - # CONFIG_MTD_PHRAM is not set - # CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set - - # - # Disk-On-Chip Device Drivers -@@ -329,24 +431,186 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 - # - # UBI - Unsorted block images - # --# CONFIG_MTD_UBI is not set -+CONFIG_MTD_UBI=y -+CONFIG_MTD_UBI_WL_THRESHOLD=4096 -+CONFIG_MTD_UBI_BEB_RESERVE=1 -+# CONFIG_MTD_UBI_GLUEBI is not set -+ -+# -+# UBI debugging options -+# -+# CONFIG_MTD_UBI_DEBUG is not set - # CONFIG_PARPORT is not set --# CONFIG_MISC_DEVICES is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=m -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+CONFIG_BLK_DEV_NBD=m -+CONFIG_BLK_DEV_RAM=m -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=4096 -+# CONFIG_BLK_DEV_XIP is not set -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+CONFIG_ATMEL_PWM=m -+CONFIG_ATMEL_TCLIB=y -+CONFIG_ATMEL_TCB_CLKSRC=y -+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 -+# CONFIG_EEPROM_93CX6 is not set -+CONFIG_ATMEL_SSC=m -+# CONFIG_ENCLOSURE_SERVICES is not set - # CONFIG_HAVE_IDE is not set - - # - # SCSI device support - # --# CONFIG_SCSI_DMA is not set -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=m -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set - # CONFIG_SCSI_NETLINK is not set --# CONFIG_NETDEVICES is not set -+# CONFIG_SCSI_PROC_FS is not set -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=m -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+CONFIG_BLK_DEV_SR=m -+# CONFIG_BLK_DEV_SR_VENDOR is not set -+# CONFIG_CHR_DEV_SG is not set -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+# CONFIG_SCSI_MULTI_LUN is not set -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+# CONFIG_SCSI_SCAN_ASYNC is not set -+CONFIG_SCSI_WAIT_SCAN=m -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+# CONFIG_SCSI_SRP_ATTRS is not set -+# CONFIG_SCSI_LOWLEVEL is not set -+# CONFIG_SCSI_DH is not set -+CONFIG_ATA=m -+# CONFIG_ATA_NONSTANDARD is not set -+# CONFIG_SATA_PMP is not set -+CONFIG_ATA_SFF=y -+# CONFIG_SATA_MV is not set -+CONFIG_PATA_AT32=m -+# CONFIG_PATA_PLATFORM is not set -+# CONFIG_MD is not set -+CONFIG_NETDEVICES=y -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+# CONFIG_VETH is not set -+CONFIG_PHYLIB=y -+ -+# -+# MII PHY device drivers -+# -+# CONFIG_MARVELL_PHY is not set -+# CONFIG_DAVICOM_PHY is not set -+# CONFIG_QSEMI_PHY is not set -+# CONFIG_LXT_PHY is not set -+# CONFIG_CICADA_PHY is not set -+# CONFIG_VITESSE_PHY is not set -+# CONFIG_SMSC_PHY is not set -+# CONFIG_BROADCOM_PHY is not set -+# CONFIG_ICPLUS_PHY is not set -+# CONFIG_REALTEK_PHY is not set -+# CONFIG_FIXED_PHY is not set -+# CONFIG_MDIO_BITBANG is not set -+CONFIG_NET_ETHERNET=y -+# CONFIG_MII is not set -+CONFIG_MACB=y -+# CONFIG_ENC28J60 is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_B44 is not set -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+# CONFIG_IWLWIFI_LEDS is not set -+# CONFIG_WAN is not set -+CONFIG_PPP=m -+# CONFIG_PPP_MULTILINK is not set -+# CONFIG_PPP_FILTER is not set -+CONFIG_PPP_ASYNC=m -+# CONFIG_PPP_SYNC_TTY is not set -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_BSDCOMP=m -+# CONFIG_PPP_MPPE is not set -+# CONFIG_PPPOE is not set -+# CONFIG_PPPOL2TP is not set -+# CONFIG_SLIP is not set -+CONFIG_SLHC=m -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set - # CONFIG_ISDN is not set - # CONFIG_PHONE is not set - - # - # Input device support - # --# CONFIG_INPUT is not set -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+CONFIG_INPUT_POLLDEV=m -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=m -+CONFIG_INPUT_MOUSEDEV_PSAUX=y -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=m -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+# CONFIG_KEYBOARD_ATKBD is not set -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+# CONFIG_KEYBOARD_STOWAWAY is not set -+CONFIG_KEYBOARD_GPIO=m -+CONFIG_INPUT_MOUSE=y -+# CONFIG_MOUSE_PS2 is not set -+# CONFIG_MOUSE_SERIAL is not set -+# CONFIG_MOUSE_APPLETOUCH is not set -+# CONFIG_MOUSE_BCM5974 is not set -+# CONFIG_MOUSE_VSXXXAA is not set -+CONFIG_MOUSE_GPIO=m -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+# CONFIG_INPUT_TOUCHSCREEN is not set -+# CONFIG_INPUT_MISC is not set - - # - # Hardware I/O ports -@@ -357,8 +621,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 - # - # Character devices - # --# CONFIG_VT is not set --# CONFIG_DEVKMEM is not set -+CONFIG_VT=y -+CONFIG_CONSOLE_TRANSLATIONS=y -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+CONFIG_DEVKMEM=y - # CONFIG_SERIAL_NONSTANDARD is not set - - # -@@ -371,7 +639,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 - # - CONFIG_SERIAL_ATMEL=y - CONFIG_SERIAL_ATMEL_CONSOLE=y --# CONFIG_SERIAL_ATMEL_PDC is not set -+CONFIG_SERIAL_ATMEL_PDC=y - # CONFIG_SERIAL_ATMEL_TTYAT is not set - CONFIG_SERIAL_CORE=y - CONFIG_SERIAL_CORE_CONSOLE=y -@@ -380,14 +648,62 @@ CONFIG_UNIX98_PTYS=y - # CONFIG_IPMI_HANDLER is not set - # CONFIG_HW_RANDOM is not set - # CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set - # CONFIG_TCG_TPM is not set --# CONFIG_I2C is not set -+CONFIG_I2C=m -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=m -+CONFIG_I2C_HELPER_AUTO=y -+CONFIG_I2C_ALGOBIT=m -+ -+# -+# I2C Hardware Bus support -+# -+ -+# -+# I2C system bus drivers (mostly embedded / system-on-chip) -+# -+CONFIG_I2C_GPIO=m -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_SIMTEC is not set -+ -+# -+# External I2C/SMBus adapter drivers -+# -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_TAOS_EVM is not set -+ -+# -+# Other I2C/SMBus bus drivers -+# -+# CONFIG_I2C_PCA_PLATFORM is not set -+# CONFIG_I2C_STUB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_DS1682 is not set -+# CONFIG_AT24 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_PCF8575 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_TPS65010 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set - CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set - CONFIG_SPI_MASTER=y - - # - # SPI Master Controller Drivers - # -+CONFIG_SPI_ATMEL_HAVE_PDC=y - CONFIG_SPI_ATMEL=y - # CONFIG_SPI_BITBANG is not set - -@@ -395,15 +711,19 @@ CONFIG_SPI_ATMEL=y - # SPI Protocol Masters - # - # CONFIG_SPI_AT25 is not set --# CONFIG_SPI_SPIDEV is not set -+CONFIG_SPI_SPIDEV=m - # CONFIG_SPI_TLE62X0 is not set - CONFIG_ARCH_REQUIRE_GPIOLIB=y - CONFIG_GPIOLIB=y --# CONFIG_GPIO_SYSFS is not set -+# CONFIG_DEBUG_GPIO is not set -+CONFIG_GPIO_SYSFS=y - - # - # I2C GPIO expanders: - # -+# CONFIG_GPIO_MAX732X is not set -+# CONFIG_GPIO_PCA953X is not set -+# CONFIG_GPIO_PCF857X is not set - - # - # PCI GPIO expanders: -@@ -426,7 +746,7 @@ CONFIG_WATCHDOG=y - # Watchdog Device Drivers - # - # CONFIG_SOFT_WATCHDOG is not set --CONFIG_AT32AP700X_WDT=y -+CONFIG_AT32_WDT=y - - # - # Sonics Silicon Backplane -@@ -440,6 +760,7 @@ CONFIG_SSB_POSSIBLE=y - # CONFIG_MFD_CORE is not set - # CONFIG_MFD_SM501 is not set - # CONFIG_HTC_PASIC3 is not set -+# CONFIG_MFD_TMIO is not set - - # - # Multimedia devices -@@ -485,6 +806,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y - # - # CONFIG_FB_S1D13XXX is not set - CONFIG_FB_ATMEL=y -+# CONFIG_FB_ATMEL_MPOP is not set - # CONFIG_FB_VIRTUAL is not set - CONFIG_BACKLIGHT_LCD_SUPPORT=y - CONFIG_LCD_CLASS_DEVICE=y -@@ -498,20 +820,51 @@ CONFIG_LCD_LTV350QV=y - # Display device support - # - # CONFIG_DISPLAY_SUPPORT is not set -+ -+# -+# Console display driver support -+# -+CONFIG_DUMMY_CONSOLE=y -+# CONFIG_FRAMEBUFFER_CONSOLE is not set - # CONFIG_LOGO is not set --# CONFIG_SOUND is not set -+CONFIG_SOUND=m -+CONFIG_SND=m -+CONFIG_SND_TIMER=m -+CONFIG_SND_PCM=m -+# CONFIG_SND_SEQUENCER is not set -+CONFIG_SND_OSSEMUL=y -+CONFIG_SND_MIXER_OSS=m -+CONFIG_SND_PCM_OSS=m -+CONFIG_SND_PCM_OSS_PLUGINS=y -+# CONFIG_SND_DYNAMIC_MINORS is not set -+# CONFIG_SND_SUPPORT_OLD_API is not set -+# CONFIG_SND_VERBOSE_PROCFS is not set -+# CONFIG_SND_VERBOSE_PRINTK is not set -+# CONFIG_SND_DEBUG is not set -+# CONFIG_SND_DRIVERS is not set -+CONFIG_SND_SPI=y -+CONFIG_SND_AT73C213=m -+CONFIG_SND_AT73C213_TARGET_BITRATE=48000 -+# CONFIG_SND_SOC is not set -+# CONFIG_SOUND_PRIME is not set -+# CONFIG_HID_SUPPORT is not set - CONFIG_USB_SUPPORT=y --# CONFIG_USB_ARCH_HAS_HCD is not set --# CONFIG_USB_ARCH_HAS_OHCI is not set --# CONFIG_USB_ARCH_HAS_EHCI is not set -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+CONFIG_USB_ARCH_HAS_EHCI=y -+# CONFIG_USB is not set - # CONFIG_USB_OTG_WHITELIST is not set - # CONFIG_USB_OTG_BLACKLIST_HUB is not set -+# CONFIG_USB_MUSB_HDRC is not set -+# CONFIG_USB_GADGET_MUSB_HDRC is not set - - # - # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' - # - CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set - # CONFIG_USB_GADGET_DEBUG_FILES is not set -+# CONFIG_USB_GADGET_DEBUG_FS is not set - CONFIG_USB_GADGET_SELECTED=y - # CONFIG_USB_GADGET_AMD5536UDC is not set - CONFIG_USB_GADGET_ATMEL_USBA=y -@@ -528,18 +881,54 @@ CONFIG_USB_ATMEL_USBA=y - # CONFIG_USB_GADGET_AT91 is not set - # CONFIG_USB_GADGET_DUMMY_HCD is not set - CONFIG_USB_GADGET_DUALSPEED=y --# CONFIG_USB_ZERO is not set --CONFIG_USB_ETH=y --# CONFIG_USB_ETH_RNDIS is not set --# CONFIG_USB_GADGETFS is not set --# CONFIG_USB_FILE_STORAGE is not set --# CONFIG_USB_G_SERIAL is not set -+CONFIG_USB_ZERO=m -+CONFIG_USB_ETH=m -+CONFIG_USB_ETH_RNDIS=y -+CONFIG_USB_GADGETFS=m -+CONFIG_USB_FILE_STORAGE=m -+# CONFIG_USB_FILE_STORAGE_TEST is not set -+CONFIG_USB_G_SERIAL=m - # CONFIG_USB_MIDI_GADGET is not set - # CONFIG_USB_G_PRINTER is not set --# CONFIG_USB_CDC_COMPOSITE is not set --# CONFIG_MMC is not set -+CONFIG_USB_CDC_COMPOSITE=m -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+# CONFIG_MMC_UNSAFE_RESUME is not set -+ -+# -+# MMC/SD Card Drivers -+# -+CONFIG_MMC_BLOCK=y -+CONFIG_MMC_BLOCK_BOUNCE=y -+# CONFIG_SDIO_UART is not set -+# CONFIG_MMC_TEST is not set -+ -+# -+# MMC/SD Host Controller Drivers -+# -+# CONFIG_MMC_SDHCI is not set -+CONFIG_MMC_ATMELMCI=y -+# CONFIG_MMC_ATMELMCI_DMA is not set -+CONFIG_MMC_SPI=m - # CONFIG_MEMSTICK is not set --# CONFIG_NEW_LEDS is not set -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=m -+ -+# -+# LED drivers -+# -+CONFIG_LEDS_ATMEL_PWM=m -+# CONFIG_LEDS_PCA9532 is not set -+CONFIG_LEDS_GPIO=m -+# CONFIG_LEDS_PCA955X is not set -+ -+# -+# LED Triggers -+# -+CONFIG_LEDS_TRIGGERS=y -+CONFIG_LEDS_TRIGGER_TIMER=m -+CONFIG_LEDS_TRIGGER_HEARTBEAT=m -+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m - # CONFIG_ACCESSIBILITY is not set - CONFIG_RTC_LIB=y - CONFIG_RTC_CLASS=y -@@ -551,12 +940,28 @@ CONFIG_RTC_HCTOSYS_DEVICE="rtc0" - # RTC interfaces - # - CONFIG_RTC_INTF_SYSFS=y --# CONFIG_RTC_INTF_PROC is not set -+CONFIG_RTC_INTF_PROC=y - CONFIG_RTC_INTF_DEV=y - # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set - # CONFIG_RTC_DRV_TEST is not set - - # -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+# CONFIG_RTC_DRV_S35390A is not set -+# CONFIG_RTC_DRV_FM3130 is not set -+ -+# - # SPI RTC drivers - # - # CONFIG_RTC_DRV_M41T94 is not set -@@ -580,18 +985,62 @@ CONFIG_RTC_INTF_DEV=y - # on-CPU RTC drivers - # - CONFIG_RTC_DRV_AT32AP700X=y --# CONFIG_DMADEVICES is not set -+# CONFIG_RTC_DRV_AVR32_AST is not set -+CONFIG_DMADEVICES=y -+ -+# -+# DMA Devices -+# -+# CONFIG_ATMEL_PDCA is not set -+CONFIG_DW_DMAC=y -+CONFIG_DMA_ENGINE=y -+ -+# -+# DMA Clients -+# -+# CONFIG_NET_DMA is not set -+CONFIG_DMATEST=m - # CONFIG_UIO is not set - - # - # File systems - # -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+# CONFIG_EXT3_FS_XATTR is not set -+# CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=y -+# CONFIG_JBD_DEBUG is not set -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_FS_POSIX_ACL is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_OCFS2_FS is not set - # CONFIG_DNOTIFY is not set --# CONFIG_INOTIFY is not set -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y - # CONFIG_QUOTA is not set - # CONFIG_AUTOFS_FS is not set - # CONFIG_AUTOFS4_FS is not set --# CONFIG_FUSE_FS is not set -+CONFIG_FUSE_FS=m -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=m -+CONFIG_MSDOS_FS=m -+CONFIG_VFAT_FS=m -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set - - # - # Pseudo filesystems -@@ -603,14 +1052,22 @@ CONFIG_SYSFS=y - CONFIG_TMPFS=y - # CONFIG_TMPFS_POSIX_ACL is not set - # CONFIG_HUGETLB_PAGE is not set --# CONFIG_CONFIGFS_FS is not set -+CONFIG_CONFIGFS_FS=y - - # - # Miscellaneous filesystems - # -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set - CONFIG_JFFS2_FS=y - CONFIG_JFFS2_FS_DEBUG=0 --# CONFIG_JFFS2_FS_WRITEBUFFER is not set -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set - # CONFIG_JFFS2_SUMMARY is not set - # CONFIG_JFFS2_FS_XATTR is not set - # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -@@ -618,8 +1075,85 @@ CONFIG_JFFS2_ZLIB=y - # CONFIG_JFFS2_LZO is not set - CONFIG_JFFS2_RTIME=y - # CONFIG_JFFS2_RUBIN is not set --# CONFIG_NETWORK_FILESYSTEMS is not set --# CONFIG_NLS is not set -+CONFIG_UBIFS_FS=y -+CONFIG_UBIFS_FS_XATTR=y -+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -+CONFIG_UBIFS_FS_LZO=y -+CONFIG_UBIFS_FS_ZLIB=y -+# CONFIG_UBIFS_FS_DEBUG is not set -+# CONFIG_CRAMFS is not set -+# CONFIG_VXFS_FS is not set -+CONFIG_MINIX_FS=m -+# CONFIG_OMFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_ROMFS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+CONFIG_NETWORK_FILESYSTEMS=y -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3=y -+# CONFIG_NFS_V3_ACL is not set -+# CONFIG_NFS_V4 is not set -+CONFIG_ROOT_NFS=y -+# CONFIG_NFSD is not set -+CONFIG_LOCKD=y -+CONFIG_LOCKD_V4=y -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+CONFIG_NLS=m -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=m -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+# CONFIG_NLS_CODEPAGE_850 is not set -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=m -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=m - # CONFIG_DLM is not set - - # -@@ -631,11 +1165,43 @@ CONFIG_ENABLE_MUST_CHECK=y - CONFIG_FRAME_WARN=1024 - CONFIG_MAGIC_SYSRQ=y - # CONFIG_UNUSED_SYMBOLS is not set --# CONFIG_DEBUG_FS is not set -+CONFIG_DEBUG_FS=y - # CONFIG_HEADERS_CHECK is not set --# CONFIG_DEBUG_KERNEL is not set --# CONFIG_DEBUG_BUGVERBOSE is not set -+CONFIG_DEBUG_KERNEL=y -+# CONFIG_DEBUG_SHIRQ is not set -+CONFIG_DETECT_SOFTLOCKUP=y -+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -+CONFIG_SCHED_DEBUG=y -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set -+# CONFIG_DEBUG_OBJECTS is not set -+# CONFIG_SLUB_DEBUG_ON is not set -+# CONFIG_SLUB_STATS is not set -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+# CONFIG_DEBUG_INFO is not set -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_WRITECOUNT is not set - # CONFIG_DEBUG_MEMORY_INIT is not set -+# CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set -+CONFIG_FRAME_POINTER=y -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_KPROBES_SANITY_TEST is not set -+# CONFIG_BACKTRACE_SELF_TEST is not set -+# CONFIG_LKDTM is not set -+# CONFIG_FAULT_INJECTION is not set - # CONFIG_SAMPLES is not set - - # -@@ -644,7 +1210,88 @@ CONFIG_MAGIC_SYSRQ=y - # CONFIG_KEYS is not set - # CONFIG_SECURITY is not set - # CONFIG_SECURITY_FILE_CAPABILITIES is not set --# CONFIG_CRYPTO is not set -+CONFIG_CRYPTO=y -+ -+# -+# Crypto core or helper -+# -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_AEAD=m -+CONFIG_CRYPTO_BLKCIPHER=m -+CONFIG_CRYPTO_HASH=m -+CONFIG_CRYPTO_MANAGER=m -+# CONFIG_CRYPTO_GF128MUL is not set -+# CONFIG_CRYPTO_NULL is not set -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_AUTHENC=m -+# CONFIG_CRYPTO_TEST is not set -+ -+# -+# Authenticated Encryption with Associated Data -+# -+# CONFIG_CRYPTO_CCM is not set -+# CONFIG_CRYPTO_GCM is not set -+# CONFIG_CRYPTO_SEQIV is not set -+ -+# -+# Block modes -+# -+CONFIG_CRYPTO_CBC=m -+# CONFIG_CRYPTO_CTR is not set -+# CONFIG_CRYPTO_CTS is not set -+# CONFIG_CRYPTO_ECB is not set -+# CONFIG_CRYPTO_LRW is not set -+# CONFIG_CRYPTO_PCBC is not set -+# CONFIG_CRYPTO_XTS is not set -+ -+# -+# Hash modes -+# -+CONFIG_CRYPTO_HMAC=m -+# CONFIG_CRYPTO_XCBC is not set -+ -+# -+# Digest -+# -+# CONFIG_CRYPTO_CRC32C is not set -+# CONFIG_CRYPTO_MD4 is not set -+CONFIG_CRYPTO_MD5=m -+# CONFIG_CRYPTO_MICHAEL_MIC is not set -+# CONFIG_CRYPTO_RMD128 is not set -+# CONFIG_CRYPTO_RMD160 is not set -+# CONFIG_CRYPTO_RMD256 is not set -+# CONFIG_CRYPTO_RMD320 is not set -+CONFIG_CRYPTO_SHA1=m -+# CONFIG_CRYPTO_SHA256 is not set -+# CONFIG_CRYPTO_SHA512 is not set -+# CONFIG_CRYPTO_TGR192 is not set -+# CONFIG_CRYPTO_WP512 is not set -+ -+# -+# Ciphers -+# -+# CONFIG_CRYPTO_AES is not set -+# CONFIG_CRYPTO_ANUBIS is not set -+# CONFIG_CRYPTO_ARC4 is not set -+# CONFIG_CRYPTO_BLOWFISH is not set -+# CONFIG_CRYPTO_CAMELLIA is not set -+# CONFIG_CRYPTO_CAST5 is not set -+# CONFIG_CRYPTO_CAST6 is not set -+CONFIG_CRYPTO_DES=m -+# CONFIG_CRYPTO_FCRYPT is not set -+# CONFIG_CRYPTO_KHAZAD is not set -+# CONFIG_CRYPTO_SALSA20 is not set -+# CONFIG_CRYPTO_SEED is not set -+# CONFIG_CRYPTO_SERPENT is not set -+# CONFIG_CRYPTO_TEA is not set -+# CONFIG_CRYPTO_TWOFISH is not set -+ -+# -+# Compression -+# -+CONFIG_CRYPTO_DEFLATE=y -+CONFIG_CRYPTO_LZO=y -+# CONFIG_CRYPTO_HW is not set - - # - # Library routines -@@ -652,16 +1299,19 @@ CONFIG_MAGIC_SYSRQ=y - CONFIG_BITREVERSE=y - # CONFIG_GENERIC_FIND_FIRST_BIT is not set - # CONFIG_GENERIC_FIND_NEXT_BIT is not set --# CONFIG_CRC_CCITT is not set --# CONFIG_CRC16 is not set --# CONFIG_CRC_T10DIF is not set --# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC_CCITT=m -+CONFIG_CRC16=y -+CONFIG_CRC_T10DIF=m -+CONFIG_CRC_ITU_T=m - CONFIG_CRC32=y --# CONFIG_CRC7 is not set -+CONFIG_CRC7=m - # CONFIG_LIBCRC32C is not set - CONFIG_ZLIB_INFLATE=y - CONFIG_ZLIB_DEFLATE=y -+CONFIG_LZO_COMPRESS=y -+CONFIG_LZO_DECOMPRESS=y - CONFIG_GENERIC_ALLOCATOR=y -+CONFIG_PLIST=y - CONFIG_HAS_IOMEM=y - CONFIG_HAS_IOPORT=y - CONFIG_HAS_DMA=y -diff --git a/arch/avr32/configs/atstk1005_defconfig b/arch/avr32/configs/atstk1005_defconfig -new file mode 100644 -index 0000000..e36b73d ---- /dev/null -+++ b/arch/avr32/configs/atstk1005_defconfig -@@ -0,0 +1,1505 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.27.4 -+# Fri Nov 7 10:22:27 2008 -+# -+CONFIG_AVR32=y -+CONFIG_GENERIC_GPIO=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+CONFIG_GENERIC_TIME=y -+CONFIG_GENERIC_CLOCKEVENTS=y -+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_GENERIC_BUG=y -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+CONFIG_POSIX_MQUEUE=y -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_AUDIT is not set -+# CONFIG_IKCONFIG is not set -+CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_CGROUPS is not set -+# CONFIG_GROUP_SCHED is not set -+CONFIG_SYSFS_DEPRECATED=y -+CONFIG_SYSFS_DEPRECATED_V2=y -+CONFIG_RELAY=y -+# CONFIG_NAMESPACES is not set -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+CONFIG_EMBEDDED=y -+# CONFIG_SYSCTL_SYSCALL is not set -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_ALL is not set -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+# CONFIG_COMPAT_BRK is not set -+# CONFIG_BASE_FULL is not set -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_TIMERFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLUB_DEBUG=y -+# CONFIG_SLAB is not set -+CONFIG_SLUB=y -+# CONFIG_SLOB is not set -+CONFIG_PROFILING=y -+# CONFIG_MARKERS is not set -+CONFIG_OPROFILE=m -+CONFIG_HAVE_OPROFILE=y -+CONFIG_KPROBES=y -+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -+# CONFIG_HAVE_IOREMAP_PROT is not set -+CONFIG_HAVE_KPROBES=y -+# CONFIG_HAVE_KRETPROBES is not set -+# CONFIG_HAVE_ARCH_TRACEHOOK is not set -+# CONFIG_HAVE_DMA_ATTRS is not set -+# CONFIG_USE_GENERIC_SMP_HELPERS is not set -+CONFIG_HAVE_CLK=y -+CONFIG_PROC_PAGE_MONITOR=y -+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=1 -+CONFIG_MODULES=y -+# CONFIG_MODULE_FORCE_LOAD is not set -+CONFIG_MODULE_UNLOAD=y -+# CONFIG_MODULE_FORCE_UNLOAD is not set -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+CONFIG_BLOCK=y -+# CONFIG_LBD is not set -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+# CONFIG_BLK_DEV_INTEGRITY is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+# CONFIG_IOSCHED_AS is not set -+# CONFIG_IOSCHED_DEADLINE is not set -+CONFIG_IOSCHED_CFQ=y -+# CONFIG_DEFAULT_AS is not set -+# CONFIG_DEFAULT_DEADLINE is not set -+CONFIG_DEFAULT_CFQ=y -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="cfq" -+CONFIG_CLASSIC_RCU=y -+ -+# -+# System Type and features -+# -+CONFIG_TICK_ONESHOT=y -+CONFIG_NO_HZ=y -+CONFIG_HIGH_RES_TIMERS=y -+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -+CONFIG_SUBARCH_AVR32B=y -+CONFIG_MMU=y -+CONFIG_PERFORMANCE_COUNTERS=y -+CONFIG_PORTMUX_GPIO_V2=y -+CONFIG_TIMER_AST=y -+CONFIG_PLATFORM_AT32AP=y -+CONFIG_CPU_AT32AP720X=y -+CONFIG_CPU_AT32AP7200=y -+CONFIG_BOARD_ATSTK1000=y -+# CONFIG_BOARD_ATNGW100 is not set -+# CONFIG_BOARD_FAVR_32 is not set -+# CONFIG_BOARD_MIMC200 is not set -+# CONFIG_BOARD_ATSTK1002 is not set -+# CONFIG_BOARD_ATSTK1003 is not set -+# CONFIG_BOARD_ATSTK1004 is not set -+CONFIG_BOARD_ATSTK1005=y -+# CONFIG_BOARD_ATSTK1006 is not set -+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set -+# CONFIG_BOARD_ATSTK100X_SPI1 is not set -+CONFIG_BOARD_ATSTK1000_J2_LED=y -+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set -+CONFIG_BOARD_ATSTK1000_J2_RGB=y -+CONFIG_BOARD_ATSTK1000_EXTDAC=y -+CONFIG_LOADER_U_BOOT=y -+ -+# -+# Atmel AVR32 AP options -+# -+CONFIG_LOAD_ADDRESS=0x10000000 -+CONFIG_ENTRY_ADDRESS=0x90000000 -+CONFIG_PHYS_OFFSET=0x10000000 -+CONFIG_PREEMPT_NONE=y -+# CONFIG_PREEMPT_VOLUNTARY is not set -+# CONFIG_PREEMPT is not set -+CONFIG_QUICKLIST=y -+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set -+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set -+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set -+CONFIG_ARCH_FLATMEM_ENABLE=y -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -+CONFIG_PAGEFLAGS_EXTENDED=y -+CONFIG_SPLIT_PTLOCK_CPUS=4 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=0 -+CONFIG_NR_QUICK=2 -+CONFIG_VIRT_TO_BUS=y -+# CONFIG_OWNERSHIP_TRACE is not set -+CONFIG_NMI_DEBUGGING=y -+# CONFIG_HZ_100 is not set -+CONFIG_HZ_250=y -+# CONFIG_HZ_300 is not set -+# CONFIG_HZ_1000 is not set -+CONFIG_HZ=250 -+CONFIG_SCHED_HRTICK=y -+CONFIG_CMDLINE="" -+ -+# -+# Power management options -+# -+CONFIG_PM=y -+# CONFIG_PM_DEBUG is not set -+CONFIG_PM_SLEEP=y -+CONFIG_SUSPEND=y -+CONFIG_SUSPEND_FREEZER=y -+CONFIG_ARCH_SUSPEND_POSSIBLE=y -+ -+# -+# CPU Frequency scaling -+# -+CONFIG_CPU_FREQ=y -+CONFIG_CPU_FREQ_TABLE=y -+# CONFIG_CPU_FREQ_DEBUG is not set -+# CONFIG_CPU_FREQ_STAT is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -+CONFIG_CPU_FREQ_GOV_USERSPACE=y -+CONFIG_CPU_FREQ_GOV_ONDEMAND=y -+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_AT32AP=y -+ -+# -+# Bus options -+# -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+# CONFIG_PCCARD is not set -+ -+# -+# Executable file formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_MISC is not set -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+CONFIG_PACKET_MMAP=y -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+CONFIG_XFRM_USER=m -+# CONFIG_XFRM_SUB_POLICY is not set -+# CONFIG_XFRM_MIGRATE is not set -+# CONFIG_XFRM_STATISTICS is not set -+CONFIG_XFRM_IPCOMP=m -+CONFIG_NET_KEY=m -+# CONFIG_NET_KEY_MIGRATE is not set -+CONFIG_INET=y -+# CONFIG_IP_MULTICAST is not set -+# CONFIG_IP_ADVANCED_ROUTER is not set -+CONFIG_IP_FIB_HASH=y -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+CONFIG_NET_IPIP=m -+CONFIG_NET_IPGRE=m -+# CONFIG_ARPD is not set -+# CONFIG_SYN_COOKIES is not set -+CONFIG_INET_AH=m -+CONFIG_INET_ESP=m -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_XFRM_TUNNEL is not set -+CONFIG_INET_TUNNEL=m -+CONFIG_INET_XFRM_MODE_TRANSPORT=m -+CONFIG_INET_XFRM_MODE_TUNNEL=m -+CONFIG_INET_XFRM_MODE_BEET=m -+# CONFIG_INET_LRO is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set -+CONFIG_IPV6=m -+# CONFIG_IPV6_PRIVACY is not set -+# CONFIG_IPV6_ROUTER_PREF is not set -+# CONFIG_IPV6_OPTIMISTIC_DAD is not set -+CONFIG_INET6_AH=m -+CONFIG_INET6_ESP=m -+CONFIG_INET6_IPCOMP=m -+# CONFIG_IPV6_MIP6 is not set -+CONFIG_INET6_XFRM_TUNNEL=m -+CONFIG_INET6_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_TRANSPORT=m -+CONFIG_INET6_XFRM_MODE_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_BEET=m -+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -+CONFIG_IPV6_SIT=m -+CONFIG_IPV6_NDISC_NODETYPE=y -+CONFIG_IPV6_TUNNEL=m -+# CONFIG_IPV6_MULTIPLE_TABLES is not set -+# CONFIG_IPV6_MROUTE is not set -+# CONFIG_NETWORK_SECMARK is not set -+# CONFIG_NETFILTER is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+CONFIG_STP=m -+CONFIG_BRIDGE=m -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+CONFIG_LLC=m -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_NET_TCPPROBE is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_CAN is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_EXT is not set -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+CONFIG_STANDALONE=y -+# CONFIG_PREVENT_FIRMWARE_BUILD is not set -+# CONFIG_FW_LOADER is not set -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+# CONFIG_CONNECTOR is not set -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AR7_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+# CONFIG_MTD_BLOCK is not set -+# CONFIG_MTD_BLOCK_RO is not set -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_GEN_PROBE=y -+# CONFIG_MTD_CFI_ADV_OPTIONS is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+# CONFIG_MTD_CFI_INTELEXT is not set -+CONFIG_MTD_CFI_AMDSTD=y -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+CONFIG_MTD_PHYSMAP=y -+CONFIG_MTD_PHYSMAP_START=0x8000000 -+CONFIG_MTD_PHYSMAP_LEN=0x0 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+CONFIG_MTD_DATAFLASH=m -+CONFIG_MTD_M25P80=m -+CONFIG_M25PXX_USE_FAST_READ=y -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+CONFIG_MTD_NAND=y -+# CONFIG_MTD_NAND_VERIFY_WRITE is not set -+CONFIG_MTD_NAND_ECC_SMC=y -+# CONFIG_MTD_NAND_MUSEUM_IDS is not set -+CONFIG_MTD_NAND_IDS=y -+# CONFIG_MTD_NAND_DISKONCHIP is not set -+CONFIG_MTD_NAND_ATMEL=y -+CONFIG_MTD_NAND_ATMEL_ECC_HW=y -+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set -+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set -+# CONFIG_MTD_NAND_NANDSIM is not set -+# CONFIG_MTD_NAND_PLATFORM is not set -+# CONFIG_MTD_ALAUDA is not set -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+CONFIG_MTD_UBI=y -+CONFIG_MTD_UBI_WL_THRESHOLD=4096 -+CONFIG_MTD_UBI_BEB_RESERVE=1 -+# CONFIG_MTD_UBI_GLUEBI is not set -+ -+# -+# UBI debugging options -+# -+# CONFIG_MTD_UBI_DEBUG is not set -+# CONFIG_PARPORT is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=m -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+CONFIG_BLK_DEV_NBD=m -+# CONFIG_BLK_DEV_UB is not set -+CONFIG_BLK_DEV_RAM=m -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=4096 -+# CONFIG_BLK_DEV_XIP is not set -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+CONFIG_ATMEL_PWM=m -+# CONFIG_ATMEL_TCLIB is not set -+# CONFIG_EEPROM_93CX6 is not set -+CONFIG_ATMEL_SSC=m -+# CONFIG_ENCLOSURE_SERVICES is not set -+# CONFIG_HAVE_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+CONFIG_SCSI=m -+CONFIG_SCSI_DMA=y -+# CONFIG_SCSI_TGT is not set -+# CONFIG_SCSI_NETLINK is not set -+# CONFIG_SCSI_PROC_FS is not set -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=m -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+CONFIG_BLK_DEV_SR=m -+# CONFIG_BLK_DEV_SR_VENDOR is not set -+# CONFIG_CHR_DEV_SG is not set -+# CONFIG_CHR_DEV_SCH is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+# CONFIG_SCSI_MULTI_LUN is not set -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+# CONFIG_SCSI_SCAN_ASYNC is not set -+CONFIG_SCSI_WAIT_SCAN=m -+ -+# -+# SCSI Transports -+# -+# CONFIG_SCSI_SPI_ATTRS is not set -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+# CONFIG_SCSI_SAS_LIBSAS is not set -+# CONFIG_SCSI_SRP_ATTRS is not set -+# CONFIG_SCSI_LOWLEVEL is not set -+# CONFIG_SCSI_DH is not set -+CONFIG_ATA=m -+# CONFIG_ATA_NONSTANDARD is not set -+# CONFIG_SATA_PMP is not set -+CONFIG_ATA_SFF=y -+# CONFIG_SATA_MV is not set -+CONFIG_PATA_AT32=m -+# CONFIG_PATA_PLATFORM is not set -+# CONFIG_MD is not set -+CONFIG_NETDEVICES=y -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+# CONFIG_VETH is not set -+CONFIG_PHYLIB=y -+ -+# -+# MII PHY device drivers -+# -+# CONFIG_MARVELL_PHY is not set -+# CONFIG_DAVICOM_PHY is not set -+# CONFIG_QSEMI_PHY is not set -+# CONFIG_LXT_PHY is not set -+# CONFIG_CICADA_PHY is not set -+# CONFIG_VITESSE_PHY is not set -+# CONFIG_SMSC_PHY is not set -+# CONFIG_BROADCOM_PHY is not set -+# CONFIG_ICPLUS_PHY is not set -+# CONFIG_REALTEK_PHY is not set -+# CONFIG_FIXED_PHY is not set -+# CONFIG_MDIO_BITBANG is not set -+CONFIG_NET_ETHERNET=y -+CONFIG_MII=m -+CONFIG_MACB=y -+# CONFIG_ENC28J60 is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_B44 is not set -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+# CONFIG_IWLWIFI_LEDS is not set -+ -+# -+# USB Network Adapters -+# -+CONFIG_USB_CATC=m -+# CONFIG_USB_KAWETH is not set -+# CONFIG_USB_PEGASUS is not set -+# CONFIG_USB_RTL8150 is not set -+CONFIG_USB_USBNET=m -+# CONFIG_USB_NET_AX8817X is not set -+CONFIG_USB_NET_CDCETHER=m -+# CONFIG_USB_NET_DM9601 is not set -+# CONFIG_USB_NET_GL620A is not set -+# CONFIG_USB_NET_NET1080 is not set -+# CONFIG_USB_NET_PLUSB is not set -+# CONFIG_USB_NET_MCS7830 is not set -+# CONFIG_USB_NET_RNDIS_HOST is not set -+CONFIG_USB_NET_CDC_SUBSET=m -+# CONFIG_USB_ALI_M5632 is not set -+# CONFIG_USB_AN2720 is not set -+CONFIG_USB_BELKIN=y -+CONFIG_USB_ARMLINUX=y -+# CONFIG_USB_EPSON2888 is not set -+# CONFIG_USB_KC2190 is not set -+# CONFIG_USB_NET_ZAURUS is not set -+# CONFIG_WAN is not set -+CONFIG_PPP=m -+# CONFIG_PPP_MULTILINK is not set -+# CONFIG_PPP_FILTER is not set -+CONFIG_PPP_ASYNC=m -+# CONFIG_PPP_SYNC_TTY is not set -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_BSDCOMP=m -+# CONFIG_PPP_MPPE is not set -+# CONFIG_PPPOE is not set -+# CONFIG_PPPOL2TP is not set -+# CONFIG_SLIP is not set -+CONFIG_SLHC=m -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+# CONFIG_PHONE is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+CONFIG_INPUT_POLLDEV=m -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=m -+CONFIG_INPUT_MOUSEDEV_PSAUX=y -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=m -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+# CONFIG_KEYBOARD_ATKBD is not set -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+# CONFIG_KEYBOARD_STOWAWAY is not set -+CONFIG_KEYBOARD_GPIO=m -+CONFIG_INPUT_MOUSE=y -+# CONFIG_MOUSE_PS2 is not set -+# CONFIG_MOUSE_SERIAL is not set -+# CONFIG_MOUSE_APPLETOUCH is not set -+# CONFIG_MOUSE_BCM5974 is not set -+# CONFIG_MOUSE_VSXXXAA is not set -+CONFIG_MOUSE_GPIO=m -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+# CONFIG_INPUT_TOUCHSCREEN is not set -+# CONFIG_INPUT_MISC is not set -+ -+# -+# Hardware I/O ports -+# -+# CONFIG_SERIO is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_CONSOLE_TRANSLATIONS=y -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+CONFIG_DEVKMEM=y -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_ATMEL=y -+CONFIG_SERIAL_ATMEL_CONSOLE=y -+CONFIG_SERIAL_ATMEL_PDC=y -+# CONFIG_SERIAL_ATMEL_TTYAT is not set -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=m -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=m -+CONFIG_I2C_HELPER_AUTO=y -+CONFIG_I2C_ALGOBIT=m -+ -+# -+# I2C Hardware Bus support -+# -+ -+# -+# I2C system bus drivers (mostly embedded / system-on-chip) -+# -+CONFIG_I2C_GPIO=m -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_SIMTEC is not set -+ -+# -+# External I2C/SMBus adapter drivers -+# -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_TAOS_EVM is not set -+CONFIG_I2C_TINY_USB=m -+ -+# -+# Other I2C/SMBus bus drivers -+# -+# CONFIG_I2C_PCA_PLATFORM is not set -+# CONFIG_I2C_STUB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_DS1682 is not set -+# CONFIG_AT24 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_PCF8575 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_TPS65010 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+CONFIG_SPI_ATMEL=y -+# CONFIG_SPI_BITBANG is not set -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+CONFIG_SPI_SPIDEV=m -+# CONFIG_SPI_TLE62X0 is not set -+CONFIG_ARCH_REQUIRE_GPIOLIB=y -+CONFIG_GPIOLIB=y -+# CONFIG_DEBUG_GPIO is not set -+CONFIG_GPIO_SYSFS=y -+ -+# -+# I2C GPIO expanders: -+# -+# CONFIG_GPIO_MAX732X is not set -+# CONFIG_GPIO_PCA953X is not set -+# CONFIG_GPIO_PCF857X is not set -+ -+# -+# PCI GPIO expanders: -+# -+ -+# -+# SPI GPIO expanders: -+# -+# CONFIG_GPIO_MAX7301 is not set -+# CONFIG_GPIO_MCP23S08 is not set -+# CONFIG_W1 is not set -+# CONFIG_POWER_SUPPLY is not set -+# CONFIG_HWMON is not set -+# CONFIG_THERMAL is not set -+# CONFIG_THERMAL_HWMON is not set -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_AT32_WDT=y -+ -+# -+# USB-based Watchdog Cards -+# -+# CONFIG_USBPCWATCHDOG is not set -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_CORE is not set -+# CONFIG_MFD_SM501 is not set -+# CONFIG_HTC_PASIC3 is not set -+# CONFIG_MFD_TMIO is not set -+ -+# -+# Multimedia devices -+# -+ -+# -+# Multimedia core support -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+# CONFIG_VIDEO_MEDIA is not set -+ -+# -+# Multimedia drivers -+# -+# CONFIG_DAB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+CONFIG_FB=y -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB_DDC is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_FOREIGN_ENDIAN is not set -+# CONFIG_FB_SYS_FOPS is not set -+# CONFIG_FB_SVGALIB is not set -+# CONFIG_FB_MACMODES is not set -+# CONFIG_FB_BACKLIGHT is not set -+# CONFIG_FB_MODE_HELPERS is not set -+# CONFIG_FB_TILEBLITTING is not set -+ -+# -+# Frame buffer hardware drivers -+# -+# CONFIG_FB_S1D13XXX is not set -+CONFIG_FB_ATMEL=y -+# CONFIG_FB_ATMEL_MPOP is not set -+# CONFIG_FB_VIRTUAL is not set -+CONFIG_BACKLIGHT_LCD_SUPPORT=y -+CONFIG_LCD_CLASS_DEVICE=y -+CONFIG_LCD_LTV350QV=y -+# CONFIG_LCD_ILI9320 is not set -+# CONFIG_LCD_VGG2432A4 is not set -+# CONFIG_LCD_PLATFORM is not set -+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+ -+# -+# Console display driver support -+# -+CONFIG_DUMMY_CONSOLE=y -+# CONFIG_FRAMEBUFFER_CONSOLE is not set -+# CONFIG_LOGO is not set -+CONFIG_SOUND=m -+CONFIG_SND=m -+CONFIG_SND_TIMER=m -+CONFIG_SND_PCM=m -+CONFIG_SND_HWDEP=m -+CONFIG_SND_RAWMIDI=m -+# CONFIG_SND_SEQUENCER is not set -+CONFIG_SND_OSSEMUL=y -+CONFIG_SND_MIXER_OSS=m -+CONFIG_SND_PCM_OSS=m -+CONFIG_SND_PCM_OSS_PLUGINS=y -+# CONFIG_SND_DYNAMIC_MINORS is not set -+# CONFIG_SND_SUPPORT_OLD_API is not set -+# CONFIG_SND_VERBOSE_PROCFS is not set -+# CONFIG_SND_VERBOSE_PRINTK is not set -+# CONFIG_SND_DEBUG is not set -+# CONFIG_SND_DRIVERS is not set -+CONFIG_SND_SPI=y -+CONFIG_SND_AT73C213=m -+CONFIG_SND_AT73C213_TARGET_BITRATE=48000 -+CONFIG_SND_USB=y -+CONFIG_SND_USB_AUDIO=m -+# CONFIG_SND_USB_CAIAQ is not set -+# CONFIG_SND_SOC is not set -+# CONFIG_SOUND_PRIME is not set -+CONFIG_HID_SUPPORT=y -+CONFIG_HID=y -+# CONFIG_HID_DEBUG is not set -+# CONFIG_HIDRAW is not set -+ -+# -+# USB Input Devices -+# -+CONFIG_USB_HID=y -+# CONFIG_USB_HIDINPUT_POWERBOOK is not set -+# CONFIG_HID_FF is not set -+# CONFIG_USB_HIDDEV is not set -+CONFIG_USB_SUPPORT=y -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+CONFIG_USB_ARCH_HAS_EHCI=y -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+# CONFIG_USB_DEVICE_CLASS is not set -+CONFIG_USB_DYNAMIC_MINORS=y -+CONFIG_USB_SUSPEND=y -+# CONFIG_USB_OTG is not set -+# CONFIG_USB_OTG_WHITELIST is not set -+# CONFIG_USB_OTG_BLACKLIST_HUB is not set -+CONFIG_USB_MON=y -+ -+# -+# USB Host Controller Drivers -+# -+# CONFIG_USB_C67X00_HCD is not set -+CONFIG_USB_EHCI_HCD=y -+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -+# CONFIG_USB_EHCI_TT_NEWSCHED is not set -+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y -+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y -+# CONFIG_USB_ISP116X_HCD is not set -+# CONFIG_USB_ISP1760_HCD is not set -+CONFIG_USB_OHCI_HCD=y -+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -+# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set -+# CONFIG_USB_SL811_HCD is not set -+# CONFIG_USB_R8A66597_HCD is not set -+# CONFIG_USB_MUSB_HDRC is not set -+# CONFIG_USB_GADGET_MUSB_HDRC is not set -+ -+# -+# USB Device Class drivers -+# -+CONFIG_USB_ACM=m -+CONFIG_USB_PRINTER=m -+CONFIG_USB_WDM=m -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+ -+# -+# may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=m -+# CONFIG_USB_STORAGE_DEBUG is not set -+# CONFIG_USB_STORAGE_DATAFAB is not set -+# CONFIG_USB_STORAGE_FREECOM is not set -+# CONFIG_USB_STORAGE_ISD200 is not set -+# CONFIG_USB_STORAGE_DPCM is not set -+# CONFIG_USB_STORAGE_USBAT is not set -+# CONFIG_USB_STORAGE_SDDR09 is not set -+# CONFIG_USB_STORAGE_SDDR55 is not set -+# CONFIG_USB_STORAGE_JUMPSHOT is not set -+# CONFIG_USB_STORAGE_ALAUDA is not set -+# CONFIG_USB_STORAGE_ONETOUCH is not set -+# CONFIG_USB_STORAGE_KARMA is not set -+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -+# CONFIG_USB_LIBUSUAL is not set -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+ -+# -+# USB port drivers -+# -+CONFIG_USB_SERIAL=m -+# CONFIG_USB_EZUSB is not set -+CONFIG_USB_SERIAL_GENERIC=y -+# CONFIG_USB_SERIAL_AIRCABLE is not set -+# CONFIG_USB_SERIAL_ARK3116 is not set -+# CONFIG_USB_SERIAL_BELKIN is not set -+# CONFIG_USB_SERIAL_CH341 is not set -+# CONFIG_USB_SERIAL_WHITEHEAT is not set -+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -+# CONFIG_USB_SERIAL_CP2101 is not set -+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set -+# CONFIG_USB_SERIAL_EMPEG is not set -+# CONFIG_USB_SERIAL_FTDI_SIO is not set -+# CONFIG_USB_SERIAL_FUNSOFT is not set -+# CONFIG_USB_SERIAL_VISOR is not set -+# CONFIG_USB_SERIAL_IPAQ is not set -+# CONFIG_USB_SERIAL_IR is not set -+# CONFIG_USB_SERIAL_EDGEPORT is not set -+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -+# CONFIG_USB_SERIAL_GARMIN is not set -+# CONFIG_USB_SERIAL_IPW is not set -+# CONFIG_USB_SERIAL_IUU is not set -+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -+# CONFIG_USB_SERIAL_KEYSPAN is not set -+# CONFIG_USB_SERIAL_KLSI is not set -+# CONFIG_USB_SERIAL_KOBIL_SCT is not set -+# CONFIG_USB_SERIAL_MCT_U232 is not set -+# CONFIG_USB_SERIAL_MOS7720 is not set -+# CONFIG_USB_SERIAL_MOS7840 is not set -+# CONFIG_USB_SERIAL_MOTOROLA is not set -+# CONFIG_USB_SERIAL_NAVMAN is not set -+CONFIG_USB_SERIAL_PL2303=m -+# CONFIG_USB_SERIAL_OTI6858 is not set -+# CONFIG_USB_SERIAL_SPCP8X5 is not set -+# CONFIG_USB_SERIAL_HP4X is not set -+# CONFIG_USB_SERIAL_SAFE is not set -+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -+# CONFIG_USB_SERIAL_TI is not set -+# CONFIG_USB_SERIAL_CYBERJACK is not set -+# CONFIG_USB_SERIAL_XIRCOM is not set -+# CONFIG_USB_SERIAL_OPTION is not set -+# CONFIG_USB_SERIAL_OMNINET is not set -+# CONFIG_USB_SERIAL_DEBUG is not set -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_ADUTUX is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+# CONFIG_USB_LCD is not set -+# CONFIG_USB_BERRY_CHARGE is not set -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYPRESS_CY7C63 is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGET is not set -+# CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_FTDI_ELAN is not set -+# CONFIG_USB_APPLEDISPLAY is not set -+# CONFIG_USB_SISUSBVGA is not set -+# CONFIG_USB_LD is not set -+# CONFIG_USB_TRANCEVIBRATOR is not set -+# CONFIG_USB_IOWARRIOR is not set -+CONFIG_USB_TEST=m -+# CONFIG_USB_ISIGHTFW is not set -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+# CONFIG_USB_GADGET_DEBUG_FS is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+CONFIG_USB_GADGET_ATMEL_USBA=y -+CONFIG_USB_ATMEL_USBA=y -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA25X is not set -+# CONFIG_USB_GADGET_M66592 is not set -+# CONFIG_USB_GADGET_PXA27X is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_S3C2410 is not set -+# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+CONFIG_USB_GADGET_DUALSPEED=y -+CONFIG_USB_ZERO=m -+CONFIG_USB_ETH=m -+CONFIG_USB_ETH_RNDIS=y -+CONFIG_USB_GADGETFS=m -+CONFIG_USB_FILE_STORAGE=m -+# CONFIG_USB_FILE_STORAGE_TEST is not set -+CONFIG_USB_G_SERIAL=m -+# CONFIG_USB_MIDI_GADGET is not set -+# CONFIG_USB_G_PRINTER is not set -+# CONFIG_USB_CDC_COMPOSITE is not set -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+# CONFIG_MMC_UNSAFE_RESUME is not set -+ -+# -+# MMC/SD Card Drivers -+# -+CONFIG_MMC_BLOCK=y -+CONFIG_MMC_BLOCK_BOUNCE=y -+# CONFIG_SDIO_UART is not set -+CONFIG_MMC_TEST=m -+ -+# -+# MMC/SD Host Controller Drivers -+# -+# CONFIG_MMC_SDHCI is not set -+CONFIG_MMC_ATMELMCI=y -+# CONFIG_MMC_ATMELMCI_DMA is not set -+CONFIG_MMC_SPI=m -+# CONFIG_MEMSTICK is not set -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=m -+ -+# -+# LED drivers -+# -+CONFIG_LEDS_ATMEL_PWM=m -+# CONFIG_LEDS_PCA9532 is not set -+CONFIG_LEDS_GPIO=m -+# CONFIG_LEDS_PCA955X is not set -+ -+# -+# LED Triggers -+# -+CONFIG_LEDS_TRIGGERS=y -+CONFIG_LEDS_TRIGGER_TIMER=m -+CONFIG_LEDS_TRIGGER_HEARTBEAT=m -+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m -+# CONFIG_ACCESSIBILITY is not set -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+# CONFIG_RTC_DEBUG is not set -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+# CONFIG_RTC_DRV_S35390A is not set -+# CONFIG_RTC_DRV_FM3130 is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_M41T94 is not set -+# CONFIG_RTC_DRV_DS1305 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set -+# CONFIG_RTC_DRV_R9701 is not set -+# CONFIG_RTC_DRV_RS5C348 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_DS1511 is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+# CONFIG_RTC_DRV_AT32AP700X is not set -+CONFIG_RTC_DRV_AVR32_AST=y -+CONFIG_DMADEVICES=y -+ -+# -+# DMA Devices -+# -+CONFIG_ATMEL_PDCA=y -+CONFIG_DW_DMAC=y -+CONFIG_DMA_ENGINE=y -+ -+# -+# DMA Clients -+# -+# CONFIG_NET_DMA is not set -+CONFIG_DMATEST=m -+# CONFIG_UIO is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+# CONFIG_EXT3_FS_XATTR is not set -+# CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=y -+# CONFIG_JBD_DEBUG is not set -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_FS_POSIX_ACL is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_OCFS2_FS is not set -+# CONFIG_DNOTIFY is not set -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+CONFIG_FUSE_FS=m -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=m -+CONFIG_MSDOS_FS=m -+CONFIG_VFAT_FS=m -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_KCORE=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_CONFIGFS_FS=y -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -+# CONFIG_JFFS2_SUMMARY is not set -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+# CONFIG_JFFS2_LZO is not set -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+CONFIG_UBIFS_FS=y -+CONFIG_UBIFS_FS_XATTR=y -+CONFIG_UBIFS_FS_ADVANCED_COMPR=y -+CONFIG_UBIFS_FS_LZO=y -+CONFIG_UBIFS_FS_ZLIB=y -+# CONFIG_UBIFS_FS_DEBUG is not set -+# CONFIG_CRAMFS is not set -+# CONFIG_VXFS_FS is not set -+CONFIG_MINIX_FS=m -+# CONFIG_OMFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_ROMFS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+CONFIG_NETWORK_FILESYSTEMS=y -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3=y -+# CONFIG_NFS_V3_ACL is not set -+# CONFIG_NFS_V4 is not set -+CONFIG_ROOT_NFS=y -+# CONFIG_NFSD is not set -+CONFIG_LOCKD=y -+CONFIG_LOCKD_V4=y -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+CONFIG_NLS=m -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=m -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+# CONFIG_NLS_CODEPAGE_850 is not set -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=m -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=m -+# CONFIG_DLM is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y -+CONFIG_ENABLE_MUST_CHECK=y -+CONFIG_FRAME_WARN=1024 -+CONFIG_MAGIC_SYSRQ=y -+# CONFIG_UNUSED_SYMBOLS is not set -+CONFIG_DEBUG_FS=y -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+# CONFIG_DEBUG_SHIRQ is not set -+CONFIG_DETECT_SOFTLOCKUP=y -+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -+CONFIG_SCHED_DEBUG=y -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set -+# CONFIG_DEBUG_OBJECTS is not set -+# CONFIG_SLUB_DEBUG_ON is not set -+# CONFIG_SLUB_STATS is not set -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+# CONFIG_DEBUG_INFO is not set -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_WRITECOUNT is not set -+# CONFIG_DEBUG_MEMORY_INIT is not set -+# CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set -+CONFIG_FRAME_POINTER=y -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_KPROBES_SANITY_TEST is not set -+# CONFIG_BACKTRACE_SELF_TEST is not set -+# CONFIG_LKDTM is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+CONFIG_CRYPTO=y -+ -+# -+# Crypto core or helper -+# -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_AEAD=m -+CONFIG_CRYPTO_BLKCIPHER=m -+CONFIG_CRYPTO_HASH=m -+CONFIG_CRYPTO_MANAGER=m -+# CONFIG_CRYPTO_GF128MUL is not set -+# CONFIG_CRYPTO_NULL is not set -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_AUTHENC=m -+# CONFIG_CRYPTO_TEST is not set -+ -+# -+# Authenticated Encryption with Associated Data -+# -+# CONFIG_CRYPTO_CCM is not set -+# CONFIG_CRYPTO_GCM is not set -+# CONFIG_CRYPTO_SEQIV is not set -+ -+# -+# Block modes -+# -+CONFIG_CRYPTO_CBC=m -+# CONFIG_CRYPTO_CTR is not set -+# CONFIG_CRYPTO_CTS is not set -+# CONFIG_CRYPTO_ECB is not set -+# CONFIG_CRYPTO_LRW is not set -+# CONFIG_CRYPTO_PCBC is not set -+# CONFIG_CRYPTO_XTS is not set -+ -+# -+# Hash modes -+# -+CONFIG_CRYPTO_HMAC=m -+# CONFIG_CRYPTO_XCBC is not set -+ -+# -+# Digest -+# -+# CONFIG_CRYPTO_CRC32C is not set -+# CONFIG_CRYPTO_MD4 is not set -+CONFIG_CRYPTO_MD5=m -+# CONFIG_CRYPTO_MICHAEL_MIC is not set -+# CONFIG_CRYPTO_RMD128 is not set -+# CONFIG_CRYPTO_RMD160 is not set -+# CONFIG_CRYPTO_RMD256 is not set -+# CONFIG_CRYPTO_RMD320 is not set -+CONFIG_CRYPTO_SHA1=m -+# CONFIG_CRYPTO_SHA256 is not set -+# CONFIG_CRYPTO_SHA512 is not set -+# CONFIG_CRYPTO_TGR192 is not set -+# CONFIG_CRYPTO_WP512 is not set -+ -+# -+# Ciphers -+# -+# CONFIG_CRYPTO_AES is not set -+# CONFIG_CRYPTO_ANUBIS is not set -+# CONFIG_CRYPTO_ARC4 is not set -+# CONFIG_CRYPTO_BLOWFISH is not set -+# CONFIG_CRYPTO_CAMELLIA is not set -+# CONFIG_CRYPTO_CAST5 is not set -+# CONFIG_CRYPTO_CAST6 is not set -+CONFIG_CRYPTO_DES=m -+# CONFIG_CRYPTO_FCRYPT is not set -+# CONFIG_CRYPTO_KHAZAD is not set -+# CONFIG_CRYPTO_SALSA20 is not set -+# CONFIG_CRYPTO_SEED is not set -+# CONFIG_CRYPTO_SERPENT is not set -+# CONFIG_CRYPTO_TEA is not set -+# CONFIG_CRYPTO_TWOFISH is not set -+ -+# -+# Compression -+# -+CONFIG_CRYPTO_DEFLATE=y -+CONFIG_CRYPTO_LZO=y -+# CONFIG_CRYPTO_HW is not set -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+# CONFIG_GENERIC_FIND_FIRST_BIT is not set -+# CONFIG_GENERIC_FIND_NEXT_BIT is not set -+CONFIG_CRC_CCITT=m -+CONFIG_CRC16=y -+# CONFIG_CRC_T10DIF is not set -+CONFIG_CRC_ITU_T=m -+CONFIG_CRC32=y -+CONFIG_CRC7=m -+# CONFIG_LIBCRC32C is not set -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_LZO_COMPRESS=y -+CONFIG_LZO_DECOMPRESS=y -+CONFIG_GENERIC_ALLOCATOR=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y -diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig -index 8b6e54c..cee2884 100644 ---- a/arch/avr32/configs/atstk1006_defconfig -+++ b/arch/avr32/configs/atstk1006_defconfig -@@ -1,7 +1,7 @@ - # - # Automatically generated make config: don't edit --# Linux kernel version: 2.6.27-rc1 --# Tue Aug 5 15:40:26 2008 -+# Linux kernel version: 2.6.27.4 -+# Fri Nov 7 10:25:15 2008 - # - CONFIG_AVR32=y - CONFIG_GENERIC_GPIO=y -@@ -129,20 +129,24 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y - CONFIG_SUBARCH_AVR32B=y - CONFIG_MMU=y - CONFIG_PERFORMANCE_COUNTERS=y -+CONFIG_PORTMUX_PIO=y - CONFIG_PLATFORM_AT32AP=y - CONFIG_CPU_AT32AP700X=y - CONFIG_CPU_AT32AP7000=y - CONFIG_BOARD_ATSTK1000=y - # CONFIG_BOARD_ATNGW100 is not set -+# CONFIG_BOARD_FAVR_32 is not set -+# CONFIG_BOARD_MIMC200 is not set - # CONFIG_BOARD_ATSTK1002 is not set - # CONFIG_BOARD_ATSTK1003 is not set - # CONFIG_BOARD_ATSTK1004 is not set -+# CONFIG_BOARD_ATSTK1005 is not set - CONFIG_BOARD_ATSTK1006=y - # CONFIG_BOARD_ATSTK100X_CUSTOM is not set - # CONFIG_BOARD_ATSTK100X_SPI1 is not set --# CONFIG_BOARD_ATSTK1000_J2_LED is not set -+CONFIG_BOARD_ATSTK1000_J2_LED=y - # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set --# CONFIG_BOARD_ATSTK1000_J2_RGB is not set -+CONFIG_BOARD_ATSTK1000_J2_RGB=y - CONFIG_BOARD_ATSTK1000_EXTDAC=y - CONFIG_LOADER_U_BOOT=y - -@@ -186,7 +190,7 @@ CONFIG_HZ_250=y - # CONFIG_HZ_300 is not set - # CONFIG_HZ_1000 is not set - CONFIG_HZ=250 --# CONFIG_SCHED_HRTICK is not set -+CONFIG_SCHED_HRTICK=y - CONFIG_CMDLINE="" - - # -@@ -360,7 +364,8 @@ CONFIG_MTD_CMDLINE_PARTS=y - # - CONFIG_MTD_CHAR=y - CONFIG_MTD_BLKDEVS=y --CONFIG_MTD_BLOCK=y -+# CONFIG_MTD_BLOCK is not set -+# CONFIG_MTD_BLOCK_RO is not set - # CONFIG_FTL is not set - # CONFIG_NFTL is not set - # CONFIG_INFTL is not set -@@ -422,7 +427,7 @@ CONFIG_M25PXX_USE_FAST_READ=y - # CONFIG_MTD_DOC2001PLUS is not set - CONFIG_MTD_NAND=y - # CONFIG_MTD_NAND_VERIFY_WRITE is not set --# CONFIG_MTD_NAND_ECC_SMC is not set -+CONFIG_MTD_NAND_ECC_SMC=y - # CONFIG_MTD_NAND_MUSEUM_IDS is not set - CONFIG_MTD_NAND_IDS=y - # CONFIG_MTD_NAND_DISKONCHIP is not set -@@ -521,7 +526,7 @@ CONFIG_NETDEVICES=y - # CONFIG_BONDING is not set - # CONFIG_MACVLAN is not set - # CONFIG_EQUALIZER is not set --CONFIG_TUN=m -+# CONFIG_TUN is not set - # CONFIG_VETH is not set - CONFIG_PHYLIB=y - -@@ -580,7 +585,7 @@ CONFIG_SLHC=m - # - # Input device support - # --CONFIG_INPUT=m -+CONFIG_INPUT=y - # CONFIG_INPUT_FF_MEMLESS is not set - CONFIG_INPUT_POLLDEV=m - -@@ -609,6 +614,8 @@ CONFIG_KEYBOARD_GPIO=m - CONFIG_INPUT_MOUSE=y - # CONFIG_MOUSE_PS2 is not set - # CONFIG_MOUSE_SERIAL is not set -+# CONFIG_MOUSE_APPLETOUCH is not set -+# CONFIG_MOUSE_BCM5974 is not set - # CONFIG_MOUSE_VSXXXAA is not set - CONFIG_MOUSE_GPIO=m - # CONFIG_INPUT_JOYSTICK is not set -@@ -625,8 +632,12 @@ CONFIG_MOUSE_GPIO=m - # - # Character devices - # --# CONFIG_VT is not set --# CONFIG_DEVKMEM is not set -+CONFIG_VT=y -+CONFIG_CONSOLE_TRANSLATIONS=y -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+CONFIG_DEVKMEM=y - # CONFIG_SERIAL_NONSTANDARD is not set - - # -@@ -653,6 +664,7 @@ CONFIG_UNIX98_PTYS=y - CONFIG_I2C=m - CONFIG_I2C_BOARDINFO=y - CONFIG_I2C_CHARDEV=m -+CONFIG_I2C_HELPER_AUTO=y - CONFIG_I2C_ALGOBIT=m - - # -@@ -702,6 +714,7 @@ CONFIG_SPI_MASTER=y - # - # SPI Master Controller Drivers - # -+CONFIG_SPI_ATMEL_HAVE_PDC=y - CONFIG_SPI_ATMEL=y - # CONFIG_SPI_BITBANG is not set - -@@ -744,7 +757,7 @@ CONFIG_WATCHDOG=y - # Watchdog Device Drivers - # - # CONFIG_SOFT_WATCHDOG is not set --CONFIG_AT32AP700X_WDT=y -+CONFIG_AT32_WDT=y - - # - # Sonics Silicon Backplane -@@ -758,6 +771,7 @@ CONFIG_SSB_POSSIBLE=y - # CONFIG_MFD_CORE is not set - # CONFIG_MFD_SM501 is not set - # CONFIG_HTC_PASIC3 is not set -+# CONFIG_MFD_TMIO is not set - - # - # Multimedia devices -@@ -803,6 +817,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y - # - # CONFIG_FB_S1D13XXX is not set - CONFIG_FB_ATMEL=y -+# CONFIG_FB_ATMEL_MPOP is not set - # CONFIG_FB_VIRTUAL is not set - CONFIG_BACKLIGHT_LCD_SUPPORT=y - CONFIG_LCD_CLASS_DEVICE=y -@@ -816,6 +831,12 @@ CONFIG_LCD_LTV350QV=y - # Display device support - # - # CONFIG_DISPLAY_SUPPORT is not set -+ -+# -+# Console display driver support -+# -+CONFIG_DUMMY_CONSOLE=y -+# CONFIG_FRAMEBUFFER_CONSOLE is not set - # CONFIG_LOGO is not set - CONFIG_SOUND=m - CONFIG_SND=m -@@ -831,11 +852,7 @@ CONFIG_SND_PCM_OSS_PLUGINS=y - # CONFIG_SND_VERBOSE_PROCFS is not set - # CONFIG_SND_VERBOSE_PRINTK is not set - # CONFIG_SND_DEBUG is not set --CONFIG_SND_DRIVERS=y --# CONFIG_SND_DUMMY is not set --# CONFIG_SND_MTPAV is not set --# CONFIG_SND_SERIAL_U16550 is not set --# CONFIG_SND_MPU401 is not set -+# CONFIG_SND_DRIVERS is not set - CONFIG_SND_SPI=y - CONFIG_SND_AT73C213=m - CONFIG_SND_AT73C213_TARGET_BITRATE=48000 -@@ -843,11 +860,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000 - # CONFIG_SOUND_PRIME is not set - # CONFIG_HID_SUPPORT is not set - CONFIG_USB_SUPPORT=y --# CONFIG_USB_ARCH_HAS_HCD is not set --# CONFIG_USB_ARCH_HAS_OHCI is not set --# CONFIG_USB_ARCH_HAS_EHCI is not set -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+CONFIG_USB_ARCH_HAS_EHCI=y -+# CONFIG_USB is not set - # CONFIG_USB_OTG_WHITELIST is not set - # CONFIG_USB_OTG_BLACKLIST_HUB is not set -+# CONFIG_USB_MUSB_HDRC is not set -+# CONFIG_USB_GADGET_MUSB_HDRC is not set - - # - # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -@@ -881,7 +901,7 @@ CONFIG_USB_FILE_STORAGE=m - CONFIG_USB_G_SERIAL=m - # CONFIG_USB_MIDI_GADGET is not set - # CONFIG_USB_G_PRINTER is not set --# CONFIG_USB_CDC_COMPOSITE is not set -+CONFIG_USB_CDC_COMPOSITE=m - CONFIG_MMC=y - # CONFIG_MMC_DEBUG is not set - # CONFIG_MMC_UNSAFE_RESUME is not set -@@ -899,6 +919,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y - # - # CONFIG_MMC_SDHCI is not set - CONFIG_MMC_ATMELMCI=y -+# CONFIG_MMC_ATMELMCI_DMA is not set - CONFIG_MMC_SPI=m - # CONFIG_MEMSTICK is not set - CONFIG_NEW_LEDS=y -@@ -975,11 +996,13 @@ CONFIG_RTC_INTF_DEV=y - # on-CPU RTC drivers - # - CONFIG_RTC_DRV_AT32AP700X=y -+# CONFIG_RTC_DRV_AVR32_AST is not set - CONFIG_DMADEVICES=y - - # - # DMA Devices - # -+# CONFIG_ATMEL_PDCA is not set - CONFIG_DW_DMAC=y - CONFIG_DMA_ENGINE=y - -@@ -993,13 +1016,13 @@ CONFIG_DMATEST=m - # - # File systems - # --CONFIG_EXT2_FS=m -+CONFIG_EXT2_FS=y - # CONFIG_EXT2_FS_XATTR is not set - # CONFIG_EXT2_FS_XIP is not set --CONFIG_EXT3_FS=m -+CONFIG_EXT3_FS=y - # CONFIG_EXT3_FS_XATTR is not set - # CONFIG_EXT4DEV_FS is not set --CONFIG_JBD=m -+CONFIG_JBD=y - # CONFIG_JBD_DEBUG is not set - # CONFIG_REISERFS_FS is not set - # CONFIG_JFS_FS is not set -@@ -1040,7 +1063,7 @@ CONFIG_SYSFS=y - CONFIG_TMPFS=y - # CONFIG_TMPFS_POSIX_ACL is not set - # CONFIG_HUGETLB_PAGE is not set --# CONFIG_CONFIGFS_FS is not set -+CONFIG_CONFIGFS_FS=y - - # - # Miscellaneous filesystems -@@ -1054,7 +1077,8 @@ CONFIG_TMPFS=y - # CONFIG_EFS_FS is not set - CONFIG_JFFS2_FS=y - CONFIG_JFFS2_FS_DEBUG=0 --# CONFIG_JFFS2_FS_WRITEBUFFER is not set -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set - # CONFIG_JFFS2_SUMMARY is not set - # CONFIG_JFFS2_FS_XATTR is not set - # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig -new file mode 100644 -index 0000000..e2bd998 ---- /dev/null -+++ b/arch/avr32/configs/favr-32_defconfig -@@ -0,0 +1,1235 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.27-rc8 -+# Tue Oct 14 13:20:41 2008 -+# -+CONFIG_AVR32=y -+CONFIG_GENERIC_GPIO=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+CONFIG_GENERIC_TIME=y -+CONFIG_GENERIC_CLOCKEVENTS=y -+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_GENERIC_BUG=y -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+CONFIG_POSIX_MQUEUE=y -+# CONFIG_BSD_PROCESS_ACCT is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_AUDIT is not set -+# CONFIG_IKCONFIG is not set -+CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_CGROUPS is not set -+# CONFIG_GROUP_SCHED is not set -+CONFIG_SYSFS_DEPRECATED=y -+CONFIG_SYSFS_DEPRECATED_V2=y -+CONFIG_RELAY=y -+# CONFIG_NAMESPACES is not set -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+CONFIG_EMBEDDED=y -+# CONFIG_SYSCTL_SYSCALL is not set -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_ALL is not set -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+# CONFIG_COMPAT_BRK is not set -+# CONFIG_BASE_FULL is not set -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_TIMERFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLUB_DEBUG=y -+# CONFIG_SLAB is not set -+CONFIG_SLUB=y -+# CONFIG_SLOB is not set -+CONFIG_PROFILING=y -+# CONFIG_MARKERS is not set -+CONFIG_OPROFILE=m -+CONFIG_HAVE_OPROFILE=y -+CONFIG_KPROBES=y -+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -+# CONFIG_HAVE_IOREMAP_PROT is not set -+CONFIG_HAVE_KPROBES=y -+# CONFIG_HAVE_KRETPROBES is not set -+# CONFIG_HAVE_ARCH_TRACEHOOK is not set -+# CONFIG_HAVE_DMA_ATTRS is not set -+# CONFIG_USE_GENERIC_SMP_HELPERS is not set -+CONFIG_HAVE_CLK=y -+CONFIG_PROC_PAGE_MONITOR=y -+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=1 -+CONFIG_MODULES=y -+# CONFIG_MODULE_FORCE_LOAD is not set -+CONFIG_MODULE_UNLOAD=y -+# CONFIG_MODULE_FORCE_UNLOAD is not set -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+CONFIG_BLOCK=y -+# CONFIG_LBD is not set -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+# CONFIG_BLK_DEV_INTEGRITY is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+# CONFIG_IOSCHED_AS is not set -+# CONFIG_IOSCHED_DEADLINE is not set -+CONFIG_IOSCHED_CFQ=y -+# CONFIG_DEFAULT_AS is not set -+# CONFIG_DEFAULT_DEADLINE is not set -+CONFIG_DEFAULT_CFQ=y -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="cfq" -+CONFIG_CLASSIC_RCU=y -+ -+# -+# System Type and features -+# -+CONFIG_TICK_ONESHOT=y -+CONFIG_NO_HZ=y -+CONFIG_HIGH_RES_TIMERS=y -+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -+CONFIG_SUBARCH_AVR32B=y -+CONFIG_MMU=y -+CONFIG_PERFORMANCE_COUNTERS=y -+CONFIG_PLATFORM_AT32AP=y -+CONFIG_CPU_AT32AP700X=y -+CONFIG_CPU_AT32AP7000=y -+# CONFIG_BOARD_ATSTK1000 is not set -+# CONFIG_BOARD_ATNGW100 is not set -+CONFIG_BOARD_FAVR_32=y -+# CONFIG_BOARD_MIMC200 is not set -+CONFIG_BOARD_FAVR32_ABDAC_RATE=44100 -+CONFIG_LOADER_U_BOOT=y -+ -+# -+# Atmel AVR32 AP options -+# -+# CONFIG_AP700X_32_BIT_SMC is not set -+CONFIG_AP700X_16_BIT_SMC=y -+# CONFIG_AP700X_8_BIT_SMC is not set -+CONFIG_LOAD_ADDRESS=0x10000000 -+CONFIG_ENTRY_ADDRESS=0x90000000 -+CONFIG_PHYS_OFFSET=0x10000000 -+CONFIG_PREEMPT_NONE=y -+# CONFIG_PREEMPT_VOLUNTARY is not set -+# CONFIG_PREEMPT is not set -+CONFIG_QUICKLIST=y -+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set -+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set -+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set -+CONFIG_ARCH_FLATMEM_ENABLE=y -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -+CONFIG_PAGEFLAGS_EXTENDED=y -+CONFIG_SPLIT_PTLOCK_CPUS=4 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=0 -+CONFIG_NR_QUICK=2 -+CONFIG_VIRT_TO_BUS=y -+# CONFIG_OWNERSHIP_TRACE is not set -+CONFIG_NMI_DEBUGGING=y -+# CONFIG_HZ_100 is not set -+CONFIG_HZ_250=y -+# CONFIG_HZ_300 is not set -+# CONFIG_HZ_1000 is not set -+CONFIG_HZ=250 -+CONFIG_SCHED_HRTICK=y -+CONFIG_CMDLINE="" -+ -+# -+# Power management options -+# -+CONFIG_PM=y -+# CONFIG_PM_DEBUG is not set -+CONFIG_PM_SLEEP=y -+CONFIG_SUSPEND=y -+CONFIG_SUSPEND_FREEZER=y -+CONFIG_ARCH_SUSPEND_POSSIBLE=y -+ -+# -+# CPU Frequency scaling -+# -+CONFIG_CPU_FREQ=y -+CONFIG_CPU_FREQ_TABLE=y -+# CONFIG_CPU_FREQ_DEBUG is not set -+# CONFIG_CPU_FREQ_STAT is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -+CONFIG_CPU_FREQ_GOV_USERSPACE=y -+CONFIG_CPU_FREQ_GOV_ONDEMAND=y -+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_AT32AP=y -+ -+# -+# Bus options -+# -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+# CONFIG_PCCARD is not set -+ -+# -+# Executable file formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_MISC is not set -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+CONFIG_PACKET_MMAP=y -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+CONFIG_XFRM_USER=m -+# CONFIG_XFRM_SUB_POLICY is not set -+# CONFIG_XFRM_MIGRATE is not set -+# CONFIG_XFRM_STATISTICS is not set -+CONFIG_XFRM_IPCOMP=m -+CONFIG_NET_KEY=m -+# CONFIG_NET_KEY_MIGRATE is not set -+CONFIG_INET=y -+# CONFIG_IP_MULTICAST is not set -+# CONFIG_IP_ADVANCED_ROUTER is not set -+CONFIG_IP_FIB_HASH=y -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+CONFIG_NET_IPIP=m -+CONFIG_NET_IPGRE=m -+# CONFIG_ARPD is not set -+# CONFIG_SYN_COOKIES is not set -+CONFIG_INET_AH=m -+CONFIG_INET_ESP=m -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_XFRM_TUNNEL is not set -+CONFIG_INET_TUNNEL=m -+CONFIG_INET_XFRM_MODE_TRANSPORT=m -+CONFIG_INET_XFRM_MODE_TUNNEL=m -+CONFIG_INET_XFRM_MODE_BEET=m -+# CONFIG_INET_LRO is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set -+CONFIG_IPV6=y -+# CONFIG_IPV6_PRIVACY is not set -+# CONFIG_IPV6_ROUTER_PREF is not set -+# CONFIG_IPV6_OPTIMISTIC_DAD is not set -+CONFIG_INET6_AH=m -+CONFIG_INET6_ESP=m -+CONFIG_INET6_IPCOMP=m -+# CONFIG_IPV6_MIP6 is not set -+CONFIG_INET6_XFRM_TUNNEL=m -+CONFIG_INET6_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_TRANSPORT=m -+CONFIG_INET6_XFRM_MODE_TUNNEL=m -+CONFIG_INET6_XFRM_MODE_BEET=m -+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -+CONFIG_IPV6_SIT=m -+CONFIG_IPV6_NDISC_NODETYPE=y -+CONFIG_IPV6_TUNNEL=m -+# CONFIG_IPV6_MULTIPLE_TABLES is not set -+# CONFIG_IPV6_MROUTE is not set -+# CONFIG_NETWORK_SECMARK is not set -+# CONFIG_NETFILTER is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+CONFIG_STP=m -+CONFIG_BRIDGE=m -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+CONFIG_LLC=m -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_NET_TCPPROBE is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_CAN is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_EXT is not set -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+CONFIG_STANDALONE=y -+# CONFIG_PREVENT_FIRMWARE_BUILD is not set -+# CONFIG_FW_LOADER is not set -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+# CONFIG_CONNECTOR is not set -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AR7_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_GEN_PROBE=y -+# CONFIG_MTD_CFI_ADV_OPTIONS is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+# CONFIG_MTD_CFI_INTELEXT is not set -+CONFIG_MTD_CFI_AMDSTD=y -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+CONFIG_MTD_PHYSMAP=y -+CONFIG_MTD_PHYSMAP_START=0x8000000 -+CONFIG_MTD_PHYSMAP_LEN=0x0 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_DATAFLASH is not set -+# CONFIG_MTD_M25P80 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+# CONFIG_MTD_NAND is not set -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+# CONFIG_MTD_UBI is not set -+# CONFIG_PARPORT is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+CONFIG_BLK_DEV_LOOP=m -+# CONFIG_BLK_DEV_CRYPTOLOOP is not set -+CONFIG_BLK_DEV_NBD=m -+CONFIG_BLK_DEV_RAM=m -+CONFIG_BLK_DEV_RAM_COUNT=16 -+CONFIG_BLK_DEV_RAM_SIZE=4096 -+# CONFIG_BLK_DEV_XIP is not set -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+CONFIG_ATMEL_PWM=m -+CONFIG_ATMEL_TCLIB=y -+CONFIG_ATMEL_TCB_CLKSRC=y -+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 -+# CONFIG_EEPROM_93CX6 is not set -+CONFIG_ATMEL_SSC=m -+# CONFIG_ENCLOSURE_SERVICES is not set -+# CONFIG_HAVE_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+# CONFIG_SCSI is not set -+# CONFIG_SCSI_DMA is not set -+# CONFIG_SCSI_NETLINK is not set -+# CONFIG_ATA is not set -+# CONFIG_MD is not set -+CONFIG_NETDEVICES=y -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+# CONFIG_VETH is not set -+CONFIG_PHYLIB=y -+ -+# -+# MII PHY device drivers -+# -+# CONFIG_MARVELL_PHY is not set -+# CONFIG_DAVICOM_PHY is not set -+# CONFIG_QSEMI_PHY is not set -+# CONFIG_LXT_PHY is not set -+# CONFIG_CICADA_PHY is not set -+# CONFIG_VITESSE_PHY is not set -+# CONFIG_SMSC_PHY is not set -+# CONFIG_BROADCOM_PHY is not set -+# CONFIG_ICPLUS_PHY is not set -+# CONFIG_REALTEK_PHY is not set -+# CONFIG_FIXED_PHY is not set -+# CONFIG_MDIO_BITBANG is not set -+CONFIG_NET_ETHERNET=y -+# CONFIG_MII is not set -+CONFIG_MACB=y -+# CONFIG_ENC28J60 is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_B44 is not set -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+# CONFIG_IWLWIFI_LEDS is not set -+# CONFIG_WAN is not set -+CONFIG_PPP=m -+# CONFIG_PPP_MULTILINK is not set -+# CONFIG_PPP_FILTER is not set -+CONFIG_PPP_ASYNC=m -+# CONFIG_PPP_SYNC_TTY is not set -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_BSDCOMP=m -+# CONFIG_PPP_MPPE is not set -+# CONFIG_PPPOE is not set -+# CONFIG_PPPOL2TP is not set -+# CONFIG_SLIP is not set -+CONFIG_SLHC=m -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+# CONFIG_PHONE is not set -+ -+# -+# Input device support -+# -+CONFIG_INPUT=y -+# CONFIG_INPUT_FF_MEMLESS is not set -+CONFIG_INPUT_POLLDEV=m -+ -+# -+# Userland interfaces -+# -+CONFIG_INPUT_MOUSEDEV=m -+CONFIG_INPUT_MOUSEDEV_PSAUX=y -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=m -+# CONFIG_INPUT_EVBUG is not set -+ -+# -+# Input Device Drivers -+# -+CONFIG_INPUT_KEYBOARD=y -+# CONFIG_KEYBOARD_ATKBD is not set -+# CONFIG_KEYBOARD_SUNKBD is not set -+# CONFIG_KEYBOARD_LKKBD is not set -+# CONFIG_KEYBOARD_XTKBD is not set -+# CONFIG_KEYBOARD_NEWTON is not set -+# CONFIG_KEYBOARD_STOWAWAY is not set -+CONFIG_KEYBOARD_GPIO=m -+CONFIG_INPUT_MOUSE=y -+# CONFIG_MOUSE_PS2 is not set -+# CONFIG_MOUSE_SERIAL is not set -+# CONFIG_MOUSE_VSXXXAA is not set -+CONFIG_MOUSE_GPIO=m -+# CONFIG_INPUT_JOYSTICK is not set -+# CONFIG_INPUT_TABLET is not set -+CONFIG_INPUT_TOUCHSCREEN=y -+CONFIG_TOUCHSCREEN_ADS7846=m -+# CONFIG_TOUCHSCREEN_FUJITSU is not set -+# CONFIG_TOUCHSCREEN_GUNZE is not set -+# CONFIG_TOUCHSCREEN_ELO is not set -+# CONFIG_TOUCHSCREEN_MTOUCH is not set -+# CONFIG_TOUCHSCREEN_INEXIO is not set -+# CONFIG_TOUCHSCREEN_MK712 is not set -+# CONFIG_TOUCHSCREEN_PENMOUNT is not set -+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -+# CONFIG_TOUCHSCREEN_UCB1400 is not set -+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set -+# CONFIG_INPUT_MISC is not set -+ -+# -+# Hardware I/O ports -+# -+# CONFIG_SERIO is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+# CONFIG_CONSOLE_TRANSLATIONS is not set -+CONFIG_VT_CONSOLE=y -+CONFIG_HW_CONSOLE=y -+# CONFIG_VT_HW_CONSOLE_BINDING is not set -+# CONFIG_DEVKMEM is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_ATMEL=y -+CONFIG_SERIAL_ATMEL_CONSOLE=y -+CONFIG_SERIAL_ATMEL_PDC=y -+# CONFIG_SERIAL_ATMEL_TTYAT is not set -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=m -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=m -+CONFIG_I2C_HELPER_AUTO=y -+CONFIG_I2C_ALGOBIT=m -+ -+# -+# I2C Hardware Bus support -+# -+ -+# -+# I2C system bus drivers (mostly embedded / system-on-chip) -+# -+CONFIG_I2C_GPIO=m -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_SIMTEC is not set -+ -+# -+# External I2C/SMBus adapter drivers -+# -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_TAOS_EVM is not set -+ -+# -+# Other I2C/SMBus bus drivers -+# -+# CONFIG_I2C_PCA_PLATFORM is not set -+# CONFIG_I2C_STUB is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_DS1682 is not set -+# CONFIG_AT24 is not set -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_PCF8575 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_TPS65010 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+CONFIG_SPI_ATMEL=y -+# CONFIG_SPI_BITBANG is not set -+ -+# -+# SPI Protocol Masters -+# -+# CONFIG_SPI_AT25 is not set -+CONFIG_SPI_SPIDEV=m -+# CONFIG_SPI_TLE62X0 is not set -+CONFIG_ARCH_REQUIRE_GPIOLIB=y -+CONFIG_GPIOLIB=y -+# CONFIG_DEBUG_GPIO is not set -+CONFIG_GPIO_SYSFS=y -+ -+# -+# I2C GPIO expanders: -+# -+# CONFIG_GPIO_MAX732X is not set -+# CONFIG_GPIO_PCA953X is not set -+# CONFIG_GPIO_PCF857X is not set -+ -+# -+# PCI GPIO expanders: -+# -+ -+# -+# SPI GPIO expanders: -+# -+# CONFIG_GPIO_MAX7301 is not set -+# CONFIG_GPIO_MCP23S08 is not set -+# CONFIG_W1 is not set -+# CONFIG_POWER_SUPPLY is not set -+# CONFIG_HWMON is not set -+# CONFIG_THERMAL is not set -+# CONFIG_THERMAL_HWMON is not set -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_AT32AP700X_WDT=y -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_CORE is not set -+# CONFIG_MFD_SM501 is not set -+# CONFIG_HTC_PASIC3 is not set -+# CONFIG_MFD_TMIO is not set -+ -+# -+# Multimedia devices -+# -+ -+# -+# Multimedia core support -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+# CONFIG_VIDEO_MEDIA is not set -+ -+# -+# Multimedia drivers -+# -+# CONFIG_DAB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+CONFIG_FB=y -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB_DDC is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_FOREIGN_ENDIAN is not set -+# CONFIG_FB_SYS_FOPS is not set -+# CONFIG_FB_SVGALIB is not set -+# CONFIG_FB_MACMODES is not set -+# CONFIG_FB_BACKLIGHT is not set -+# CONFIG_FB_MODE_HELPERS is not set -+# CONFIG_FB_TILEBLITTING is not set -+ -+# -+# Frame buffer hardware drivers -+# -+# CONFIG_FB_S1D13XXX is not set -+CONFIG_FB_ATMEL=y -+# CONFIG_FB_VIRTUAL is not set -+CONFIG_BACKLIGHT_LCD_SUPPORT=y -+# CONFIG_LCD_CLASS_DEVICE is not set -+CONFIG_BACKLIGHT_CLASS_DEVICE=m -+# CONFIG_BACKLIGHT_ATMEL_LCDC is not set -+CONFIG_BACKLIGHT_ATMEL_PWM=m -+# CONFIG_BACKLIGHT_CORGI is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+ -+# -+# Console display driver support -+# -+CONFIG_DUMMY_CONSOLE=y -+# CONFIG_FRAMEBUFFER_CONSOLE is not set -+# CONFIG_LOGO is not set -+CONFIG_SOUND=m -+# CONFIG_SND is not set -+CONFIG_SOUND_PRIME=m -+# CONFIG_HID_SUPPORT is not set -+CONFIG_USB_SUPPORT=y -+# CONFIG_USB_ARCH_HAS_HCD is not set -+# CONFIG_USB_ARCH_HAS_OHCI is not set -+# CONFIG_USB_ARCH_HAS_EHCI is not set -+# CONFIG_USB_OTG_WHITELIST is not set -+# CONFIG_USB_OTG_BLACKLIST_HUB is not set -+# CONFIG_USB_MUSB_HDRC is not set -+# CONFIG_USB_GADGET_MUSB_HDRC is not set -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -+# -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG is not set -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+# CONFIG_USB_GADGET_DEBUG_FS is not set -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+CONFIG_USB_GADGET_ATMEL_USBA=y -+CONFIG_USB_ATMEL_USBA=y -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_PXA25X is not set -+# CONFIG_USB_GADGET_M66592 is not set -+# CONFIG_USB_GADGET_PXA27X is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_S3C2410 is not set -+# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+CONFIG_USB_GADGET_DUALSPEED=y -+CONFIG_USB_ZERO=m -+CONFIG_USB_ETH=m -+CONFIG_USB_ETH_RNDIS=y -+CONFIG_USB_GADGETFS=m -+CONFIG_USB_FILE_STORAGE=m -+# CONFIG_USB_FILE_STORAGE_TEST is not set -+CONFIG_USB_G_SERIAL=m -+# CONFIG_USB_MIDI_GADGET is not set -+# CONFIG_USB_G_PRINTER is not set -+CONFIG_USB_CDC_COMPOSITE=m -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+# CONFIG_MMC_UNSAFE_RESUME is not set -+ -+# -+# MMC/SD Card Drivers -+# -+CONFIG_MMC_BLOCK=y -+CONFIG_MMC_BLOCK_BOUNCE=y -+# CONFIG_SDIO_UART is not set -+# CONFIG_MMC_TEST is not set -+ -+# -+# MMC/SD Host Controller Drivers -+# -+# CONFIG_MMC_SDHCI is not set -+CONFIG_MMC_ATMELMCI=y -+CONFIG_MMC_ATMELMCI_DMA=y -+# CONFIG_MMC_SPI is not set -+# CONFIG_MEMSTICK is not set -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=y -+ -+# -+# LED drivers -+# -+CONFIG_LEDS_ATMEL_PWM=m -+# CONFIG_LEDS_PCA9532 is not set -+CONFIG_LEDS_GPIO=y -+# CONFIG_LEDS_PCA955X is not set -+ -+# -+# LED Triggers -+# -+CONFIG_LEDS_TRIGGERS=y -+CONFIG_LEDS_TRIGGER_TIMER=y -+CONFIG_LEDS_TRIGGER_HEARTBEAT=y -+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -+# CONFIG_ACCESSIBILITY is not set -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+# CONFIG_RTC_DEBUG is not set -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+# CONFIG_RTC_DRV_S35390A is not set -+# CONFIG_RTC_DRV_FM3130 is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_M41T94 is not set -+# CONFIG_RTC_DRV_DS1305 is not set -+# CONFIG_RTC_DRV_MAX6902 is not set -+# CONFIG_RTC_DRV_R9701 is not set -+# CONFIG_RTC_DRV_RS5C348 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_DS1511 is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+CONFIG_RTC_DRV_AT32AP700X=y -+CONFIG_DMADEVICES=y -+ -+# -+# DMA Devices -+# -+CONFIG_DW_DMAC=y -+CONFIG_DMA_ENGINE=y -+ -+# -+# DMA Clients -+# -+# CONFIG_NET_DMA is not set -+# CONFIG_DMATEST is not set -+# CONFIG_UIO is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+# CONFIG_EXT3_FS_XATTR is not set -+# CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=y -+# CONFIG_JBD_DEBUG is not set -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_FS_POSIX_ACL is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_OCFS2_FS is not set -+# CONFIG_DNOTIFY is not set -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+CONFIG_FUSE_FS=m -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=m -+CONFIG_MSDOS_FS=m -+CONFIG_VFAT_FS=m -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_KCORE=y -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_CONFIGFS_FS=y -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+# CONFIG_JFFS2_FS_WRITEBUFFER is not set -+# CONFIG_JFFS2_SUMMARY is not set -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+# CONFIG_JFFS2_LZO is not set -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+# CONFIG_CRAMFS is not set -+# CONFIG_VXFS_FS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_OMFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_ROMFS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+CONFIG_NETWORK_FILESYSTEMS=y -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3=y -+# CONFIG_NFS_V3_ACL is not set -+# CONFIG_NFS_V4 is not set -+CONFIG_ROOT_NFS=y -+# CONFIG_NFSD is not set -+CONFIG_LOCKD=y -+CONFIG_LOCKD_V4=y -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+CONFIG_NLS=m -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=m -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+# CONFIG_NLS_CODEPAGE_850 is not set -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=m -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=m -+# CONFIG_DLM is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y -+CONFIG_ENABLE_MUST_CHECK=y -+CONFIG_FRAME_WARN=1024 -+CONFIG_MAGIC_SYSRQ=y -+# CONFIG_UNUSED_SYMBOLS is not set -+CONFIG_DEBUG_FS=y -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+# CONFIG_DEBUG_SHIRQ is not set -+CONFIG_DETECT_SOFTLOCKUP=y -+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -+CONFIG_SCHED_DEBUG=y -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set -+# CONFIG_DEBUG_OBJECTS is not set -+# CONFIG_SLUB_DEBUG_ON is not set -+# CONFIG_SLUB_STATS is not set -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+# CONFIG_DEBUG_INFO is not set -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_WRITECOUNT is not set -+# CONFIG_DEBUG_MEMORY_INIT is not set -+# CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set -+CONFIG_FRAME_POINTER=y -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_KPROBES_SANITY_TEST is not set -+# CONFIG_BACKTRACE_SELF_TEST is not set -+# CONFIG_LKDTM is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+CONFIG_CRYPTO=y -+ -+# -+# Crypto core or helper -+# -+CONFIG_CRYPTO_ALGAPI=m -+CONFIG_CRYPTO_AEAD=m -+CONFIG_CRYPTO_BLKCIPHER=m -+CONFIG_CRYPTO_HASH=m -+CONFIG_CRYPTO_MANAGER=m -+# CONFIG_CRYPTO_GF128MUL is not set -+# CONFIG_CRYPTO_NULL is not set -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_AUTHENC=m -+# CONFIG_CRYPTO_TEST is not set -+ -+# -+# Authenticated Encryption with Associated Data -+# -+# CONFIG_CRYPTO_CCM is not set -+# CONFIG_CRYPTO_GCM is not set -+# CONFIG_CRYPTO_SEQIV is not set -+ -+# -+# Block modes -+# -+CONFIG_CRYPTO_CBC=m -+# CONFIG_CRYPTO_CTR is not set -+# CONFIG_CRYPTO_CTS is not set -+# CONFIG_CRYPTO_ECB is not set -+# CONFIG_CRYPTO_LRW is not set -+# CONFIG_CRYPTO_PCBC is not set -+# CONFIG_CRYPTO_XTS is not set -+ -+# -+# Hash modes -+# -+CONFIG_CRYPTO_HMAC=m -+# CONFIG_CRYPTO_XCBC is not set -+ -+# -+# Digest -+# -+# CONFIG_CRYPTO_CRC32C is not set -+# CONFIG_CRYPTO_MD4 is not set -+CONFIG_CRYPTO_MD5=m -+# CONFIG_CRYPTO_MICHAEL_MIC is not set -+# CONFIG_CRYPTO_RMD128 is not set -+# CONFIG_CRYPTO_RMD160 is not set -+# CONFIG_CRYPTO_RMD256 is not set -+# CONFIG_CRYPTO_RMD320 is not set -+CONFIG_CRYPTO_SHA1=m -+# CONFIG_CRYPTO_SHA256 is not set -+# CONFIG_CRYPTO_SHA512 is not set -+# CONFIG_CRYPTO_TGR192 is not set -+# CONFIG_CRYPTO_WP512 is not set -+ -+# -+# Ciphers -+# -+# CONFIG_CRYPTO_AES is not set -+# CONFIG_CRYPTO_ANUBIS is not set -+# CONFIG_CRYPTO_ARC4 is not set -+# CONFIG_CRYPTO_BLOWFISH is not set -+# CONFIG_CRYPTO_CAMELLIA is not set -+# CONFIG_CRYPTO_CAST5 is not set -+# CONFIG_CRYPTO_CAST6 is not set -+CONFIG_CRYPTO_DES=m -+# CONFIG_CRYPTO_FCRYPT is not set -+# CONFIG_CRYPTO_KHAZAD is not set -+# CONFIG_CRYPTO_SALSA20 is not set -+# CONFIG_CRYPTO_SEED is not set -+# CONFIG_CRYPTO_SERPENT is not set -+# CONFIG_CRYPTO_TEA is not set -+# CONFIG_CRYPTO_TWOFISH is not set -+ -+# -+# Compression -+# -+CONFIG_CRYPTO_DEFLATE=m -+# CONFIG_CRYPTO_LZO is not set -+# CONFIG_CRYPTO_HW is not set -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+# CONFIG_GENERIC_FIND_FIRST_BIT is not set -+# CONFIG_GENERIC_FIND_NEXT_BIT is not set -+CONFIG_CRC_CCITT=m -+# CONFIG_CRC16 is not set -+# CONFIG_CRC_T10DIF is not set -+# CONFIG_CRC_ITU_T is not set -+CONFIG_CRC32=y -+# CONFIG_CRC7 is not set -+# CONFIG_LIBCRC32C is not set -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_GENERIC_ALLOCATOR=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y -diff --git a/arch/avr32/configs/mimc200_defconfig b/arch/avr32/configs/mimc200_defconfig -new file mode 100644 -index 0000000..981e4f8 ---- /dev/null -+++ b/arch/avr32/configs/mimc200_defconfig -@@ -0,0 +1,1109 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.27-rc8 -+# Mon Oct 13 15:46:53 2008 -+# -+CONFIG_AVR32=y -+CONFIG_GENERIC_GPIO=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_STACKTRACE_SUPPORT=y -+CONFIG_LOCKDEP_SUPPORT=y -+CONFIG_TRACE_IRQFLAGS_SUPPORT=y -+CONFIG_HARDIRQS_SW_RESEND=y -+CONFIG_GENERIC_IRQ_PROBE=y -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+CONFIG_GENERIC_TIME=y -+CONFIG_GENERIC_CLOCKEVENTS=y -+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -+# CONFIG_ARCH_HAS_ILOG2_U32 is not set -+# CONFIG_ARCH_HAS_ILOG2_U64 is not set -+CONFIG_GENERIC_HWEIGHT=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_GENERIC_BUG=y -+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -+ -+# -+# General setup -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+CONFIG_LOCALVERSION="" -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_SYSVIPC_SYSCTL=y -+CONFIG_POSIX_MQUEUE=y -+CONFIG_BSD_PROCESS_ACCT=y -+CONFIG_BSD_PROCESS_ACCT_V3=y -+# CONFIG_TASKSTATS is not set -+# CONFIG_AUDIT is not set -+# CONFIG_IKCONFIG is not set -+CONFIG_LOG_BUF_SHIFT=14 -+# CONFIG_CGROUPS is not set -+# CONFIG_GROUP_SCHED is not set -+CONFIG_SYSFS_DEPRECATED=y -+CONFIG_SYSFS_DEPRECATED_V2=y -+# CONFIG_RELAY is not set -+# CONFIG_NAMESPACES is not set -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_CC_OPTIMIZE_FOR_SIZE=y -+CONFIG_SYSCTL=y -+CONFIG_EMBEDDED=y -+# CONFIG_SYSCTL_SYSCALL is not set -+CONFIG_KALLSYMS=y -+# CONFIG_KALLSYMS_ALL is not set -+# CONFIG_KALLSYMS_EXTRA_PASS is not set -+CONFIG_HOTPLUG=y -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_ELF_CORE=y -+# CONFIG_COMPAT_BRK is not set -+# CONFIG_BASE_FULL is not set -+CONFIG_FUTEX=y -+CONFIG_ANON_INODES=y -+CONFIG_EPOLL=y -+CONFIG_SIGNALFD=y -+CONFIG_TIMERFD=y -+CONFIG_EVENTFD=y -+CONFIG_SHMEM=y -+CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_SLUB_DEBUG=y -+# CONFIG_SLAB is not set -+CONFIG_SLUB=y -+# CONFIG_SLOB is not set -+CONFIG_PROFILING=y -+# CONFIG_MARKERS is not set -+# CONFIG_OPROFILE is not set -+CONFIG_HAVE_OPROFILE=y -+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -+# CONFIG_HAVE_IOREMAP_PROT is not set -+CONFIG_HAVE_KPROBES=y -+# CONFIG_HAVE_KRETPROBES is not set -+# CONFIG_HAVE_ARCH_TRACEHOOK is not set -+# CONFIG_HAVE_DMA_ATTRS is not set -+# CONFIG_USE_GENERIC_SMP_HELPERS is not set -+CONFIG_HAVE_CLK=y -+CONFIG_PROC_PAGE_MONITOR=y -+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -+CONFIG_SLABINFO=y -+CONFIG_RT_MUTEXES=y -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=1 -+# CONFIG_MODULES is not set -+CONFIG_BLOCK=y -+# CONFIG_LBD is not set -+# CONFIG_BLK_DEV_IO_TRACE is not set -+# CONFIG_LSF is not set -+# CONFIG_BLK_DEV_BSG is not set -+# CONFIG_BLK_DEV_INTEGRITY is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+# CONFIG_IOSCHED_AS is not set -+# CONFIG_IOSCHED_DEADLINE is not set -+CONFIG_IOSCHED_CFQ=y -+# CONFIG_DEFAULT_AS is not set -+# CONFIG_DEFAULT_DEADLINE is not set -+CONFIG_DEFAULT_CFQ=y -+# CONFIG_DEFAULT_NOOP is not set -+CONFIG_DEFAULT_IOSCHED="cfq" -+CONFIG_CLASSIC_RCU=y -+ -+# -+# System Type and features -+# -+CONFIG_TICK_ONESHOT=y -+CONFIG_NO_HZ=y -+CONFIG_HIGH_RES_TIMERS=y -+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -+CONFIG_SUBARCH_AVR32B=y -+CONFIG_MMU=y -+CONFIG_PERFORMANCE_COUNTERS=y -+CONFIG_PLATFORM_AT32AP=y -+CONFIG_CPU_AT32AP700X=y -+CONFIG_CPU_AT32AP7000=y -+# CONFIG_BOARD_ATSTK1000 is not set -+# CONFIG_BOARD_ATNGW100 is not set -+CONFIG_BOARD_MIMC200=y -+CONFIG_LOADER_U_BOOT=y -+ -+# -+# Atmel AVR32 AP options -+# -+# CONFIG_AP700X_32_BIT_SMC is not set -+CONFIG_AP700X_16_BIT_SMC=y -+# CONFIG_AP700X_8_BIT_SMC is not set -+CONFIG_LOAD_ADDRESS=0x10000000 -+CONFIG_ENTRY_ADDRESS=0x90000000 -+CONFIG_PHYS_OFFSET=0x10000000 -+CONFIG_PREEMPT_NONE=y -+# CONFIG_PREEMPT_VOLUNTARY is not set -+# CONFIG_PREEMPT is not set -+CONFIG_QUICKLIST=y -+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set -+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set -+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set -+CONFIG_ARCH_FLATMEM_ENABLE=y -+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set -+CONFIG_SELECT_MEMORY_MODEL=y -+CONFIG_FLATMEM_MANUAL=y -+# CONFIG_DISCONTIGMEM_MANUAL is not set -+# CONFIG_SPARSEMEM_MANUAL is not set -+CONFIG_FLATMEM=y -+CONFIG_FLAT_NODE_MEM_MAP=y -+# CONFIG_SPARSEMEM_STATIC is not set -+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -+CONFIG_PAGEFLAGS_EXTENDED=y -+CONFIG_SPLIT_PTLOCK_CPUS=4 -+# CONFIG_RESOURCES_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=0 -+CONFIG_NR_QUICK=2 -+CONFIG_VIRT_TO_BUS=y -+# CONFIG_OWNERSHIP_TRACE is not set -+CONFIG_NMI_DEBUGGING=y -+# CONFIG_HZ_100 is not set -+CONFIG_HZ_250=y -+# CONFIG_HZ_300 is not set -+# CONFIG_HZ_1000 is not set -+CONFIG_HZ=250 -+CONFIG_SCHED_HRTICK=y -+CONFIG_CMDLINE="" -+ -+# -+# Power management options -+# -+CONFIG_PM=y -+# CONFIG_PM_DEBUG is not set -+CONFIG_PM_SLEEP=y -+CONFIG_SUSPEND=y -+CONFIG_SUSPEND_FREEZER=y -+CONFIG_ARCH_SUSPEND_POSSIBLE=y -+ -+# -+# CPU Frequency scaling -+# -+CONFIG_CPU_FREQ=y -+CONFIG_CPU_FREQ_TABLE=y -+# CONFIG_CPU_FREQ_DEBUG is not set -+# CONFIG_CPU_FREQ_STAT is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -+CONFIG_CPU_FREQ_GOV_USERSPACE=y -+CONFIG_CPU_FREQ_GOV_ONDEMAND=y -+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -+CONFIG_CPU_FREQ_AT32AP=y -+ -+# -+# Bus options -+# -+# CONFIG_ARCH_SUPPORTS_MSI is not set -+# CONFIG_PCCARD is not set -+ -+# -+# Executable file formats -+# -+CONFIG_BINFMT_ELF=y -+# CONFIG_BINFMT_MISC is not set -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+CONFIG_PACKET_MMAP=y -+CONFIG_UNIX=y -+CONFIG_XFRM=y -+CONFIG_XFRM_USER=y -+# CONFIG_XFRM_SUB_POLICY is not set -+# CONFIG_XFRM_MIGRATE is not set -+# CONFIG_XFRM_STATISTICS is not set -+CONFIG_XFRM_IPCOMP=y -+CONFIG_NET_KEY=y -+# CONFIG_NET_KEY_MIGRATE is not set -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+CONFIG_IP_ADVANCED_ROUTER=y -+CONFIG_ASK_IP_FIB_HASH=y -+# CONFIG_IP_FIB_TRIE is not set -+CONFIG_IP_FIB_HASH=y -+# CONFIG_IP_MULTIPLE_TABLES is not set -+# CONFIG_IP_ROUTE_MULTIPATH is not set -+# CONFIG_IP_ROUTE_VERBOSE is not set -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+# CONFIG_IP_PNP_BOOTP is not set -+# CONFIG_IP_PNP_RARP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+CONFIG_IP_MROUTE=y -+CONFIG_IP_PIMSM_V1=y -+# CONFIG_IP_PIMSM_V2 is not set -+# CONFIG_ARPD is not set -+CONFIG_SYN_COOKIES=y -+CONFIG_INET_AH=y -+CONFIG_INET_ESP=y -+CONFIG_INET_IPCOMP=y -+CONFIG_INET_XFRM_TUNNEL=y -+CONFIG_INET_TUNNEL=y -+CONFIG_INET_XFRM_MODE_TRANSPORT=y -+CONFIG_INET_XFRM_MODE_TUNNEL=y -+CONFIG_INET_XFRM_MODE_BEET=y -+# CONFIG_INET_LRO is not set -+CONFIG_INET_DIAG=y -+CONFIG_INET_TCP_DIAG=y -+# CONFIG_TCP_CONG_ADVANCED is not set -+CONFIG_TCP_CONG_CUBIC=y -+CONFIG_DEFAULT_TCP_CONG="cubic" -+# CONFIG_TCP_MD5SIG is not set -+CONFIG_IPV6=y -+# CONFIG_IPV6_PRIVACY is not set -+# CONFIG_IPV6_ROUTER_PREF is not set -+# CONFIG_IPV6_OPTIMISTIC_DAD is not set -+CONFIG_INET6_AH=y -+CONFIG_INET6_ESP=y -+CONFIG_INET6_IPCOMP=y -+# CONFIG_IPV6_MIP6 is not set -+CONFIG_INET6_XFRM_TUNNEL=y -+CONFIG_INET6_TUNNEL=y -+CONFIG_INET6_XFRM_MODE_TRANSPORT=y -+CONFIG_INET6_XFRM_MODE_TUNNEL=y -+CONFIG_INET6_XFRM_MODE_BEET=y -+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -+CONFIG_IPV6_SIT=y -+CONFIG_IPV6_NDISC_NODETYPE=y -+# CONFIG_IPV6_TUNNEL is not set -+# CONFIG_IPV6_MULTIPLE_TABLES is not set -+# CONFIG_IPV6_MROUTE is not set -+# CONFIG_NETWORK_SECMARK is not set -+# CONFIG_NETFILTER is not set -+# CONFIG_IP_DCCP is not set -+# CONFIG_IP_SCTP is not set -+# CONFIG_TIPC is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_CAN is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+# CONFIG_AF_RXRPC is not set -+ -+# -+# Wireless -+# -+# CONFIG_CFG80211 is not set -+# CONFIG_WIRELESS_EXT is not set -+# CONFIG_MAC80211 is not set -+# CONFIG_IEEE80211 is not set -+# CONFIG_RFKILL is not set -+# CONFIG_NET_9P is not set -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -+CONFIG_STANDALONE=y -+# CONFIG_PREVENT_FIRMWARE_BUILD is not set -+# CONFIG_FW_LOADER is not set -+# CONFIG_DEBUG_DRIVER is not set -+# CONFIG_DEBUG_DEVRES is not set -+# CONFIG_SYS_HYPERVISOR is not set -+# CONFIG_CONNECTOR is not set -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+CONFIG_MTD_CMDLINE_PARTS=y -+# CONFIG_MTD_AR7_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLKDEVS=y -+CONFIG_MTD_BLOCK=y -+# CONFIG_FTL is not set -+# CONFIG_NFTL is not set -+# CONFIG_INFTL is not set -+# CONFIG_RFD_FTL is not set -+# CONFIG_SSFDC is not set -+# CONFIG_MTD_OOPS is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_GEN_PROBE=y -+# CONFIG_MTD_CFI_ADV_OPTIONS is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+# CONFIG_MTD_CFI_INTELEXT is not set -+CONFIG_MTD_CFI_AMDSTD=y -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+CONFIG_MTD_PHYSMAP=y -+CONFIG_MTD_PHYSMAP_START=0x80000000 -+CONFIG_MTD_PHYSMAP_LEN=0x0 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -+# CONFIG_MTD_PLATRAM is not set -+ -+# -+# Self-contained MTD device drivers -+# -+CONFIG_MTD_DATAFLASH=y -+# CONFIG_MTD_M25P80 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+# CONFIG_MTD_NAND is not set -+# CONFIG_MTD_ONENAND is not set -+ -+# -+# UBI - Unsorted block images -+# -+# CONFIG_MTD_UBI is not set -+# CONFIG_PARPORT is not set -+CONFIG_BLK_DEV=y -+# CONFIG_BLK_DEV_COW_COMMON is not set -+# CONFIG_BLK_DEV_LOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+# CONFIG_BLK_DEV_RAM is not set -+# CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set -+CONFIG_MISC_DEVICES=y -+# CONFIG_ATMEL_PWM is not set -+CONFIG_ATMEL_TCLIB=y -+CONFIG_ATMEL_TCB_CLKSRC=y -+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 -+# CONFIG_EEPROM_93CX6 is not set -+# CONFIG_ATMEL_SSC is not set -+# CONFIG_ENCLOSURE_SERVICES is not set -+# CONFIG_HAVE_IDE is not set -+ -+# -+# SCSI device support -+# -+# CONFIG_RAID_ATTRS is not set -+# CONFIG_SCSI is not set -+# CONFIG_SCSI_DMA is not set -+# CONFIG_SCSI_NETLINK is not set -+# CONFIG_ATA is not set -+# CONFIG_MD is not set -+CONFIG_NETDEVICES=y -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_MACVLAN is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+# CONFIG_VETH is not set -+CONFIG_PHYLIB=y -+ -+# -+# MII PHY device drivers -+# -+# CONFIG_MARVELL_PHY is not set -+# CONFIG_DAVICOM_PHY is not set -+# CONFIG_QSEMI_PHY is not set -+# CONFIG_LXT_PHY is not set -+# CONFIG_CICADA_PHY is not set -+# CONFIG_VITESSE_PHY is not set -+# CONFIG_SMSC_PHY is not set -+# CONFIG_BROADCOM_PHY is not set -+# CONFIG_ICPLUS_PHY is not set -+# CONFIG_REALTEK_PHY is not set -+# CONFIG_FIXED_PHY is not set -+# CONFIG_MDIO_BITBANG is not set -+CONFIG_NET_ETHERNET=y -+# CONFIG_MII is not set -+CONFIG_MACB=y -+# CONFIG_ENC28J60 is not set -+# CONFIG_IBM_NEW_EMAC_ZMII is not set -+# CONFIG_IBM_NEW_EMAC_RGMII is not set -+# CONFIG_IBM_NEW_EMAC_TAH is not set -+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -+# CONFIG_B44 is not set -+# CONFIG_NETDEV_1000 is not set -+# CONFIG_NETDEV_10000 is not set -+ -+# -+# Wireless LAN -+# -+# CONFIG_WLAN_PRE80211 is not set -+# CONFIG_WLAN_80211 is not set -+# CONFIG_IWLWIFI_LEDS is not set -+# CONFIG_WAN is not set -+# CONFIG_PPP is not set -+# CONFIG_SLIP is not set -+# CONFIG_NETCONSOLE is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_ISDN is not set -+# CONFIG_PHONE is not set -+ -+# -+# Input device support -+# -+# CONFIG_INPUT is not set -+ -+# -+# Hardware I/O ports -+# -+# CONFIG_SERIO is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+# CONFIG_VT is not set -+# CONFIG_DEVKMEM is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+# CONFIG_SERIAL_8250 is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_ATMEL=y -+CONFIG_SERIAL_ATMEL_CONSOLE=y -+CONFIG_SERIAL_ATMEL_PDC=y -+# CONFIG_SERIAL_ATMEL_TTYAT is not set -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+CONFIG_UNIX98_PTYS=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_HW_RANDOM is not set -+# CONFIG_R3964 is not set -+# CONFIG_RAW_DRIVER is not set -+# CONFIG_TCG_TPM is not set -+CONFIG_I2C=y -+CONFIG_I2C_BOARDINFO=y -+CONFIG_I2C_CHARDEV=y -+CONFIG_I2C_HELPER_AUTO=y -+CONFIG_I2C_ALGOBIT=y -+ -+# -+# I2C Hardware Bus support -+# -+ -+# -+# I2C system bus drivers (mostly embedded / system-on-chip) -+# -+CONFIG_I2C_GPIO=y -+# CONFIG_I2C_OCORES is not set -+# CONFIG_I2C_SIMTEC is not set -+ -+# -+# External I2C/SMBus adapter drivers -+# -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_TAOS_EVM is not set -+ -+# -+# Other I2C/SMBus bus drivers -+# -+# CONFIG_I2C_PCA_PLATFORM is not set -+ -+# -+# Miscellaneous I2C Chip support -+# -+# CONFIG_DS1682 is not set -+CONFIG_AT24=y -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_PCF8575 is not set -+# CONFIG_SENSORS_PCA9539 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_TPS65010 is not set -+# CONFIG_SENSORS_MAX6875 is not set -+# CONFIG_SENSORS_TSL2550 is not set -+# CONFIG_DS28CM00 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+CONFIG_SPI=y -+# CONFIG_SPI_DEBUG is not set -+CONFIG_SPI_MASTER=y -+ -+# -+# SPI Master Controller Drivers -+# -+CONFIG_SPI_ATMEL=y -+# CONFIG_SPI_BITBANG is not set -+ -+# -+# SPI Protocol Masters -+# -+CONFIG_SPI_AT25=y -+# CONFIG_SPI_SPIDEV is not set -+# CONFIG_SPI_TLE62X0 is not set -+CONFIG_ARCH_REQUIRE_GPIOLIB=y -+CONFIG_GPIOLIB=y -+# CONFIG_DEBUG_GPIO is not set -+CONFIG_GPIO_SYSFS=y -+ -+# -+# I2C GPIO expanders: -+# -+# CONFIG_GPIO_MAX732X is not set -+# CONFIG_GPIO_PCA953X is not set -+# CONFIG_GPIO_PCF857X is not set -+ -+# -+# PCI GPIO expanders: -+# -+ -+# -+# SPI GPIO expanders: -+# -+# CONFIG_GPIO_MAX7301 is not set -+# CONFIG_GPIO_MCP23S08 is not set -+# CONFIG_W1 is not set -+# CONFIG_POWER_SUPPLY is not set -+# CONFIG_HWMON is not set -+# CONFIG_THERMAL is not set -+# CONFIG_THERMAL_HWMON is not set -+CONFIG_WATCHDOG=y -+# CONFIG_WATCHDOG_NOWAYOUT is not set -+ -+# -+# Watchdog Device Drivers -+# -+# CONFIG_SOFT_WATCHDOG is not set -+CONFIG_AT32AP700X_WDT=y -+ -+# -+# Sonics Silicon Backplane -+# -+CONFIG_SSB_POSSIBLE=y -+# CONFIG_SSB is not set -+ -+# -+# Multifunction device drivers -+# -+# CONFIG_MFD_CORE is not set -+# CONFIG_MFD_SM501 is not set -+# CONFIG_HTC_PASIC3 is not set -+# CONFIG_MFD_TMIO is not set -+ -+# -+# Multimedia devices -+# -+ -+# -+# Multimedia core support -+# -+# CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set -+# CONFIG_VIDEO_MEDIA is not set -+ -+# -+# Multimedia drivers -+# -+# CONFIG_DAB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_VGASTATE is not set -+# CONFIG_VIDEO_OUTPUT_CONTROL is not set -+CONFIG_FB=y -+# CONFIG_FIRMWARE_EDID is not set -+# CONFIG_FB_DDC is not set -+CONFIG_FB_CFB_FILLRECT=y -+CONFIG_FB_CFB_COPYAREA=y -+CONFIG_FB_CFB_IMAGEBLIT=y -+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -+# CONFIG_FB_SYS_FILLRECT is not set -+# CONFIG_FB_SYS_COPYAREA is not set -+# CONFIG_FB_SYS_IMAGEBLIT is not set -+# CONFIG_FB_FOREIGN_ENDIAN is not set -+# CONFIG_FB_SYS_FOPS is not set -+# CONFIG_FB_SVGALIB is not set -+# CONFIG_FB_MACMODES is not set -+# CONFIG_FB_BACKLIGHT is not set -+# CONFIG_FB_MODE_HELPERS is not set -+# CONFIG_FB_TILEBLITTING is not set -+ -+# -+# Frame buffer hardware drivers -+# -+# CONFIG_FB_S1D13XXX is not set -+CONFIG_FB_ATMEL=y -+# CONFIG_FB_VIRTUAL is not set -+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -+ -+# -+# Display device support -+# -+# CONFIG_DISPLAY_SUPPORT is not set -+# CONFIG_LOGO is not set -+# CONFIG_SOUND is not set -+# CONFIG_USB_SUPPORT is not set -+CONFIG_MMC=y -+# CONFIG_MMC_DEBUG is not set -+# CONFIG_MMC_UNSAFE_RESUME is not set -+ -+# -+# MMC/SD Card Drivers -+# -+CONFIG_MMC_BLOCK=y -+CONFIG_MMC_BLOCK_BOUNCE=y -+# CONFIG_SDIO_UART is not set -+CONFIG_MMC_TEST=y -+ -+# -+# MMC/SD Host Controller Drivers -+# -+# CONFIG_MMC_SDHCI is not set -+CONFIG_MMC_ATMELMCI=y -+# CONFIG_MMC_ATMELMCI_DMA is not set -+CONFIG_MMC_SPI=y -+# CONFIG_MEMSTICK is not set -+CONFIG_NEW_LEDS=y -+CONFIG_LEDS_CLASS=y -+ -+# -+# LED drivers -+# -+CONFIG_LEDS_GPIO=y -+# CONFIG_LEDS_PCA955X is not set -+ -+# -+# LED Triggers -+# -+CONFIG_LEDS_TRIGGERS=y -+CONFIG_LEDS_TRIGGER_TIMER=y -+CONFIG_LEDS_TRIGGER_HEARTBEAT=y -+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -+# CONFIG_ACCESSIBILITY is not set -+CONFIG_RTC_LIB=y -+CONFIG_RTC_CLASS=y -+CONFIG_RTC_HCTOSYS=y -+CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -+# CONFIG_RTC_DEBUG is not set -+ -+# -+# RTC interfaces -+# -+CONFIG_RTC_INTF_SYSFS=y -+CONFIG_RTC_INTF_PROC=y -+CONFIG_RTC_INTF_DEV=y -+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -+# CONFIG_RTC_DRV_TEST is not set -+ -+# -+# I2C RTC drivers -+# -+# CONFIG_RTC_DRV_DS1307 is not set -+# CONFIG_RTC_DRV_DS1374 is not set -+# CONFIG_RTC_DRV_DS1672 is not set -+# CONFIG_RTC_DRV_MAX6900 is not set -+# CONFIG_RTC_DRV_RS5C372 is not set -+# CONFIG_RTC_DRV_ISL1208 is not set -+# CONFIG_RTC_DRV_X1205 is not set -+# CONFIG_RTC_DRV_PCF8563 is not set -+# CONFIG_RTC_DRV_PCF8583 is not set -+# CONFIG_RTC_DRV_M41T80 is not set -+# CONFIG_RTC_DRV_S35390A is not set -+# CONFIG_RTC_DRV_FM3130 is not set -+ -+# -+# SPI RTC drivers -+# -+# CONFIG_RTC_DRV_M41T94 is not set -+# CONFIG_RTC_DRV_DS1305 is not set -+CONFIG_RTC_DRV_DS1390=y -+# CONFIG_RTC_DRV_MAX6902 is not set -+# CONFIG_RTC_DRV_R9701 is not set -+# CONFIG_RTC_DRV_RS5C348 is not set -+ -+# -+# Platform RTC drivers -+# -+# CONFIG_RTC_DRV_DS1511 is not set -+# CONFIG_RTC_DRV_DS1553 is not set -+# CONFIG_RTC_DRV_DS1742 is not set -+# CONFIG_RTC_DRV_STK17TA8 is not set -+# CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_V3020 is not set -+ -+# -+# on-CPU RTC drivers -+# -+# CONFIG_RTC_DRV_AT32AP700X is not set -+CONFIG_DMADEVICES=y -+ -+# -+# DMA Devices -+# -+CONFIG_DW_DMAC=y -+CONFIG_DMA_ENGINE=y -+ -+# -+# DMA Clients -+# -+# CONFIG_NET_DMA is not set -+# CONFIG_DMATEST is not set -+# CONFIG_UIO is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT2_FS_XIP is not set -+CONFIG_EXT3_FS=y -+# CONFIG_EXT3_FS_XATTR is not set -+# CONFIG_EXT4DEV_FS is not set -+CONFIG_JBD=y -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_FS_POSIX_ACL is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_OCFS2_FS is not set -+# CONFIG_DNOTIFY is not set -+CONFIG_INOTIFY=y -+CONFIG_INOTIFY_USER=y -+# CONFIG_QUOTA is not set -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+# CONFIG_FUSE_FS is not set -+ -+# -+# CD-ROM/DVD Filesystems -+# -+# CONFIG_ISO9660_FS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=850 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+# CONFIG_NTFS_FS is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+# CONFIG_PROC_KCORE is not set -+CONFIG_PROC_SYSCTL=y -+CONFIG_SYSFS=y -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_POSIX_ACL is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_CONFIGFS_FS=y -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+CONFIG_JFFS2_FS_WRITEBUFFER=y -+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -+# CONFIG_JFFS2_SUMMARY is not set -+# CONFIG_JFFS2_FS_XATTR is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+# CONFIG_JFFS2_LZO is not set -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+# CONFIG_CRAMFS is not set -+# CONFIG_VXFS_FS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_OMFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_ROMFS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+CONFIG_NETWORK_FILESYSTEMS=y -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3=y -+# CONFIG_NFS_V3_ACL is not set -+# CONFIG_NFS_V4 is not set -+CONFIG_ROOT_NFS=y -+# CONFIG_NFSD is not set -+CONFIG_LOCKD=y -+CONFIG_LOCKD_V4=y -+CONFIG_NFS_COMMON=y -+CONFIG_SUNRPC=y -+# CONFIG_RPCSEC_GSS_KRB5 is not set -+# CONFIG_RPCSEC_GSS_SPKM3 is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="iso8859-1" -+CONFIG_NLS_CODEPAGE_437=y -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+CONFIG_NLS_CODEPAGE_850=y -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=y -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=y -+# CONFIG_DLM is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+CONFIG_ENABLE_WARN_DEPRECATED=y -+CONFIG_ENABLE_MUST_CHECK=y -+CONFIG_FRAME_WARN=1024 -+CONFIG_MAGIC_SYSRQ=y -+# CONFIG_UNUSED_SYMBOLS is not set -+# CONFIG_DEBUG_FS is not set -+# CONFIG_HEADERS_CHECK is not set -+CONFIG_DEBUG_KERNEL=y -+# CONFIG_DEBUG_SHIRQ is not set -+CONFIG_DETECT_SOFTLOCKUP=y -+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -+CONFIG_SCHED_DEBUG=y -+# CONFIG_SCHEDSTATS is not set -+# CONFIG_TIMER_STATS is not set -+# CONFIG_DEBUG_OBJECTS is not set -+# CONFIG_SLUB_DEBUG_ON is not set -+# CONFIG_SLUB_STATS is not set -+# CONFIG_DEBUG_RT_MUTEXES is not set -+# CONFIG_RT_MUTEX_TESTER is not set -+# CONFIG_DEBUG_SPINLOCK is not set -+# CONFIG_DEBUG_MUTEXES is not set -+# CONFIG_DEBUG_LOCK_ALLOC is not set -+# CONFIG_PROVE_LOCKING is not set -+# CONFIG_LOCK_STAT is not set -+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -+# CONFIG_DEBUG_KOBJECT is not set -+CONFIG_DEBUG_BUGVERBOSE=y -+# CONFIG_DEBUG_INFO is not set -+# CONFIG_DEBUG_VM is not set -+# CONFIG_DEBUG_WRITECOUNT is not set -+# CONFIG_DEBUG_MEMORY_INIT is not set -+# CONFIG_DEBUG_LIST is not set -+# CONFIG_DEBUG_SG is not set -+CONFIG_FRAME_POINTER=y -+# CONFIG_BOOT_PRINTK_DELAY is not set -+# CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_BACKTRACE_SELF_TEST is not set -+# CONFIG_FAULT_INJECTION is not set -+# CONFIG_SAMPLES is not set -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+# CONFIG_SECURITY_FILE_CAPABILITIES is not set -+CONFIG_CRYPTO=y -+ -+# -+# Crypto core or helper -+# -+CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_AEAD=y -+CONFIG_CRYPTO_BLKCIPHER=y -+CONFIG_CRYPTO_HASH=y -+CONFIG_CRYPTO_MANAGER=y -+# CONFIG_CRYPTO_GF128MUL is not set -+# CONFIG_CRYPTO_NULL is not set -+# CONFIG_CRYPTO_CRYPTD is not set -+CONFIG_CRYPTO_AUTHENC=y -+ -+# -+# Authenticated Encryption with Associated Data -+# -+# CONFIG_CRYPTO_CCM is not set -+# CONFIG_CRYPTO_GCM is not set -+# CONFIG_CRYPTO_SEQIV is not set -+ -+# -+# Block modes -+# -+CONFIG_CRYPTO_CBC=y -+# CONFIG_CRYPTO_CTR is not set -+# CONFIG_CRYPTO_CTS is not set -+CONFIG_CRYPTO_ECB=y -+# CONFIG_CRYPTO_LRW is not set -+CONFIG_CRYPTO_PCBC=y -+# CONFIG_CRYPTO_XTS is not set -+ -+# -+# Hash modes -+# -+CONFIG_CRYPTO_HMAC=y -+# CONFIG_CRYPTO_XCBC is not set -+ -+# -+# Digest -+# -+# CONFIG_CRYPTO_CRC32C is not set -+# CONFIG_CRYPTO_MD4 is not set -+CONFIG_CRYPTO_MD5=y -+# CONFIG_CRYPTO_MICHAEL_MIC is not set -+# CONFIG_CRYPTO_RMD128 is not set -+# CONFIG_CRYPTO_RMD160 is not set -+# CONFIG_CRYPTO_RMD256 is not set -+# CONFIG_CRYPTO_RMD320 is not set -+CONFIG_CRYPTO_SHA1=y -+# CONFIG_CRYPTO_SHA256 is not set -+# CONFIG_CRYPTO_SHA512 is not set -+# CONFIG_CRYPTO_TGR192 is not set -+# CONFIG_CRYPTO_WP512 is not set -+ -+# -+# Ciphers -+# -+# CONFIG_CRYPTO_AES is not set -+# CONFIG_CRYPTO_ANUBIS is not set -+CONFIG_CRYPTO_ARC4=y -+# CONFIG_CRYPTO_BLOWFISH is not set -+# CONFIG_CRYPTO_CAMELLIA is not set -+# CONFIG_CRYPTO_CAST5 is not set -+# CONFIG_CRYPTO_CAST6 is not set -+CONFIG_CRYPTO_DES=y -+# CONFIG_CRYPTO_FCRYPT is not set -+# CONFIG_CRYPTO_KHAZAD is not set -+# CONFIG_CRYPTO_SALSA20 is not set -+# CONFIG_CRYPTO_SEED is not set -+# CONFIG_CRYPTO_SERPENT is not set -+# CONFIG_CRYPTO_TEA is not set -+# CONFIG_CRYPTO_TWOFISH is not set -+ -+# -+# Compression -+# -+CONFIG_CRYPTO_DEFLATE=y -+# CONFIG_CRYPTO_LZO is not set -+CONFIG_CRYPTO_HW=y -+ -+# -+# Library routines -+# -+CONFIG_BITREVERSE=y -+# CONFIG_GENERIC_FIND_FIRST_BIT is not set -+# CONFIG_GENERIC_FIND_NEXT_BIT is not set -+CONFIG_CRC_CCITT=y -+# CONFIG_CRC16 is not set -+# CONFIG_CRC_T10DIF is not set -+CONFIG_CRC_ITU_T=y -+CONFIG_CRC32=y -+CONFIG_CRC7=y -+# CONFIG_LIBCRC32C is not set -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+CONFIG_GENERIC_ALLOCATOR=y -+CONFIG_PLIST=y -+CONFIG_HAS_IOMEM=y -+CONFIG_HAS_IOPORT=y -+CONFIG_HAS_DMA=y -diff --git a/arch/avr32/include/asm/ast_regs.h b/arch/avr32/include/asm/ast_regs.h -new file mode 100644 -index 0000000..2e2cfb9 ---- /dev/null -+++ b/arch/avr32/include/asm/ast_regs.h -@@ -0,0 +1,88 @@ -+/* -+ * Register definitions for the Asynchronous Timer (AST) -+ * -+ * Copyright (C) 2008 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#ifndef __AST_REGS_H__ -+#define __AST_REGS_H__ -+ -+/* Control Register */ -+#define AST_CR 0x0000 -+# define AST_CR_EN_BIT 0 /* Enable */ -+# define AST_CR_PCLR_BIT 1 /* Prescaler Clear */ -+# define AST_CR_CA0_BIT 8 /* Clear on Alarm */ -+# define AST_CR_CA1_BIT 9 -+# define AST_CR_PSEL_START 16 /* Prescale Select */ -+# define AST_CR_PSEL_SIZE 4 -+ -+/* Counter Value */ -+#define AST_CV 0x0004 -+ -+/* Status, Status Clear, Interrupt Enable/Disable/Mask, Wake Enable */ -+#define AST_SR 0x0008 -+#define AST_SCR 0x000c -+#define AST_IER 0x0010 -+#define AST_IDR 0x0014 -+#define AST_IMR 0x0018 -+#define AST_WER 0x001c -+# define AST_OVF_BIT 0 /* Overflow */ -+# define AST_ALARM0_BIT 8 /* Alarm event */ -+# define AST_ALARM1_BIT 9 -+# define AST_PER0_BIT 16 /* Periodic event */ -+# define AST_PER1_BIT 17 -+# define AST_BUSY_BIT 24 /* AST busy */ -+# define AST_READY_BIT 25 /* BUSY 1 -> 0 event */ -+# define AST_CLK_BUSY_BIT 28 /* CLOCK busy */ -+# define AST_CLK_READY_BIT 29 /* CKL_BUSY 1 -> 0 event */ -+ -+/* Alarm registers */ -+#define AST_AR0 0x0020 -+#define AST_AR1 0x0024 -+ -+/* Periodic Interval registers */ -+#define AST_PIR0 0x0030 -+#define AST_PIR1 0x0034 -+# define AST_PIRx_INSEL_START 0 /* Interval select */ -+# define AST_PIRx_INSEL_SIZE 4 -+ -+/* Clock Select register */ -+#define AST_CLOCK 0x0040 -+# define AST_CLOCK_CEN_BIT 0 /* Clock Enable */ -+# define AST_CLOCK_CSSEL_START 8 /* Clock Source */ -+# define AST_CLOCK_CSSEL_SIZE 2 -+# define AST_CLOCK_SLOW 0 /* RC oscillator */ -+# define AST_CLOCK_OSC32 1 /* 32 kHz oscillator */ -+# define AST_CLOCK_PB 2 /* Peripheral Bus clock */ -+# define AST_CLOCK_GC 3 /* Generic clock */ -+ -+/* Version register */ -+#define AST_VERSION 0x00fc -+ -+/* Bit manipulation macros */ -+#define AST_BIT(name) \ -+ (1 << AST_##name##_BIT) -+#define AST_BF(name,value) \ -+ (((value) & ((1 << AST_##name##_SIZE) - 1)) \ -+ << AST_##name##_START) -+#define AST_BFEXT(name,value) \ -+ (((value) >> AST_##name##_START) \ -+ & ((1 << AST_##name##_SIZE) - 1)) -+#define AST_BFINS(name,value,old) \ -+ (((old) & ~(((1 << AST_##name##_SIZE) - 1) \ -+ << AST_##name##_START)) \ -+ | AST_BF(name,value)) -+ -+/* Register access macros */ -+#define ast_readl(base, reg) \ -+ __raw_readl(base + AST_##reg) -+#define ast_writel(base, reg, value) \ -+ __raw_writel(value, base + AST_##reg) -+ -+struct platform_device; -+void ast_time_init(struct platform_device *pdev, unsigned int clksel); -+ -+#endif /* __AST_REGS_H__ */ -diff --git a/arch/avr32/include/asm/atmel-mci.h b/arch/avr32/include/asm/atmel-mci.h -index c2ea6e1..59f3fad 100644 ---- a/arch/avr32/include/asm/atmel-mci.h -+++ b/arch/avr32/include/asm/atmel-mci.h -@@ -1,9 +1,39 @@ - #ifndef __ASM_AVR32_ATMEL_MCI_H - #define __ASM_AVR32_ATMEL_MCI_H - --struct mci_platform_data { -+#define ATMEL_MCI_MAX_NR_SLOTS 2 -+ -+struct dma_slave; -+ -+/** -+ * struct mci_slot_pdata - board-specific per-slot configuration -+ * @bus_width: Number of data lines wired up the slot -+ * @detect_pin: GPIO pin wired to the card detect switch -+ * @wp_pin: GPIO pin wired to the write protect sensor -+ * -+ * If a given slot is not present on the board, @bus_width should be -+ * set to 0. The other fields are ignored in this case. -+ * -+ * Any pins that aren't available should be set to a negative value. -+ * -+ * Note that support for multiple slots is experimental -- some cards -+ * might get upset if we don't get the clock management exactly right. -+ * But in most cases, it should work just fine. -+ */ -+struct mci_slot_pdata { -+ unsigned int bus_width; - int detect_pin; - int wp_pin; - }; - -+/** -+ * struct mci_platform_data - board-specific MMC/SDcard configuration -+ * @dma_slave: DMA slave interface to use in data transfers, or NULL. -+ * @slot: Per-slot configuration data. -+ */ -+struct mci_platform_data { -+ struct dma_slave *dma_slave; -+ struct mci_slot_pdata slot[ATMEL_MCI_MAX_NR_SLOTS]; -+}; -+ - #endif /* __ASM_AVR32_ATMEL_MCI_H */ -diff --git a/arch/avr32/include/asm/byteorder.h b/arch/avr32/include/asm/byteorder.h -index d77b48b..8e3af02 100644 ---- a/arch/avr32/include/asm/byteorder.h -+++ b/arch/avr32/include/asm/byteorder.h -@@ -7,6 +7,9 @@ - #include <asm/types.h> - #include <linux/compiler.h> - -+#define __BIG_ENDIAN -+#define __SWAB_64_THRU_32__ -+ - #ifdef __CHECKER__ - extern unsigned long __builtin_bswap_32(unsigned long x); - extern unsigned short __builtin_bswap_16(unsigned short x); -@@ -17,15 +20,18 @@ extern unsigned short __builtin_bswap_16(unsigned short x); - * the result. - */ - #if !(__GNUC__ == 4 && __GNUC_MINOR__ < 2) --#define __arch__swab32(x) __builtin_bswap_32(x) --#define __arch__swab16(x) __builtin_bswap_16(x) --#endif -+static inline __attribute_const__ __u16 __arch_swab16(__u16 val) -+{ -+ return __builtin_bswap_16(val); -+} -+#define __arch_swab16 __arch_swab16 - --#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) --# define __BYTEORDER_HAS_U64__ --# define __SWAB_64_THRU_32__ -+static inline __attribute_const__ __u32 __arch_swab32(__u32 val) -+{ -+ return __builtin_bswap_32(val); -+} -+#define __arch_swab32 __arch_swab32 - #endif - --#include <linux/byteorder/big_endian.h> -- -+#include <linux/byteorder.h> - #endif /* __ASM_AVR32_BYTEORDER_H */ -diff --git a/arch/avr32/include/asm/io.h b/arch/avr32/include/asm/io.h -index a520f77..22c97ef 100644 ---- a/arch/avr32/include/asm/io.h -+++ b/arch/avr32/include/asm/io.h -@@ -160,6 +160,14 @@ BUILDIO_IOPORT(l, u32) - #define readw_relaxed readw - #define readl_relaxed readl - -+#define readb_be __raw_readb -+#define readw_be __raw_readw -+#define readl_be __raw_readl -+ -+#define writeb_be __raw_writeb -+#define writew_be __raw_writew -+#define writel_be __raw_writel -+ - #define __BUILD_MEMORY_STRING(bwl, type) \ - static inline void writes##bwl(volatile void __iomem *addr, \ - const void *data, unsigned int count) \ -diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c -index e84faff..f2c0cb1 100644 ---- a/arch/avr32/kernel/cpu.c -+++ b/arch/avr32/kernel/cpu.c -@@ -208,6 +208,7 @@ struct chip_id_map { - - static const struct chip_id_map chip_names[] = { - { .mid = 0x1f, .pn = 0x1e82, .name = "AT32AP700x" }, -+ { .mid = 0x1f, .pn = 0x1e83, .name = "AT32AP720x" }, - }; - #define NR_CHIP_NAMES ARRAY_SIZE(chip_names) - -diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S -index 33d4937..921da60 100644 ---- a/arch/avr32/kernel/entry-avr32b.S -+++ b/arch/avr32/kernel/entry-avr32b.S -@@ -112,7 +112,9 @@ pgtbl_lookup: - - /* Second level lookup */ - ld.w r2, r3[r1 << 2] -+#ifdef CONFIG_CPU_AT32AP700X - mfsr r0, SYSREG_TLBARLO -+#endif - bld r2, _PAGE_BIT_PRESENT - brcc page_not_present - -@@ -124,6 +126,8 @@ pgtbl_lookup: - andl r2, _PAGE_FLAGS_HARDWARE_MASK & 0xffff - mtsr SYSREG_TLBELO, r2 - -+ /* Later CPUs do this algorithm in hardware */ -+#ifdef CONFIG_CPU_AT32AP700X - /* Figure out which entry we want to replace */ - mfsr r1, SYSREG_MMUCR - clz r2, r0 -@@ -134,6 +138,7 @@ pgtbl_lookup: - - 1: bfins r1, r2, SYSREG_DRP_OFFSET, SYSREG_DRP_SIZE - mtsr SYSREG_MMUCR, r1 -+#endif /* CONFIG_CPU_AT32AP700X */ - tlbw - - tlbmiss_restore -@@ -751,8 +756,10 @@ irq_level\level: - - lddsp r4, sp[REG_SR] - bfextu r4, r4, SYSREG_M0_OFFSET, 3 -+#ifdef CONFIG_CPU_AT32AP700X - cp.w r4, MODE_SUPERVISOR >> SYSREG_M0_OFFSET - breq 2f -+#endif - cp.w r4, MODE_USER >> SYSREG_M0_OFFSET - #ifdef CONFIG_PREEMPT - brne 3f -@@ -786,6 +793,7 @@ irq_level\level: - rete - #endif - -+#ifdef CONFIG_CPU_AT32AP700X - 2: get_thread_info r0 - ld.w r1, r0[TI_flags] - bld r1, TIF_CPU_GOING_TO_SLEEP -@@ -796,6 +804,7 @@ irq_level\level: - #endif - sub r1, pc, . - cpu_idle_skip_sleep - stdsp sp[REG_PC], r1 -+#endif - #ifdef CONFIG_PREEMPT - 3: get_thread_info r0 - ld.w r2, r0[TI_preempt_count] -diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c -index 2c08ac9..134d530 100644 ---- a/arch/avr32/kernel/process.c -+++ b/arch/avr32/kernel/process.c -@@ -9,6 +9,7 @@ - #include <linux/module.h> - #include <linux/kallsyms.h> - #include <linux/fs.h> -+#include <linux/pm.h> - #include <linux/ptrace.h> - #include <linux/reboot.h> - #include <linux/tick.h> -@@ -20,7 +21,7 @@ - - #include <mach/pm.h> - --void (*pm_power_off)(void) = NULL; -+void (*pm_power_off)(void); - EXPORT_SYMBOL(pm_power_off); - - /* -diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c -index d8e623c..5c70839 100644 ---- a/arch/avr32/kernel/setup.c -+++ b/arch/avr32/kernel/setup.c -@@ -283,6 +283,25 @@ static int __init early_parse_fbmem(char *p) - } - early_param("fbmem", early_parse_fbmem); - -+/* -+ * Pick out the memory size. We look for mem=size@start, -+ * where start and size are "size[KkMmGg]" -+ */ -+static int __init early_mem(char *p) -+{ -+ resource_size_t size, start; -+ -+ start = system_ram->start; -+ size = memparse(p, &p); -+ if (*p == '@') -+ start = memparse(p + 1, &p); -+ -+ system_ram->start = start; -+ system_ram->end = system_ram->start + size - 1; -+ return 0; -+} -+early_param("mem", early_mem); -+ - static int __init parse_tag_core(struct tag *tag) - { - if (tag->hdr.size > 2) { -diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c -index 283481d..09dfab9 100644 ---- a/arch/avr32/kernel/time.c -+++ b/arch/avr32/kernel/time.c -@@ -15,6 +15,8 @@ - - #include <asm/sysreg.h> - -+#include <mach/cpu.h> -+#include <mach/init.h> - #include <mach/pm.h> - - -@@ -116,6 +118,9 @@ void __init time_init(void) - unsigned long counter_hz; - int ret; - -+ /* Make sure we don't get any interrupts until we ask for it. */ -+ sysreg_write(COMPARE, 0); -+ - xtime.tv_sec = mktime(2007, 1, 1, 0, 0, 0); - xtime.tv_nsec = 0; - -@@ -130,12 +135,16 @@ void __init time_init(void) - if (ret) - pr_debug("timer: could not register clocksource: %d\n", ret); - -+ if (!cpu_has_working_compare()) { -+ platform_time_init(); -+ return; -+ } -+ - /* setup COMPARE clockevent */ - comparator.mult = div_sc(counter_hz, NSEC_PER_SEC, comparator.shift); - comparator.max_delta_ns = clockevent_delta2ns((u32)~0, &comparator); - comparator.min_delta_ns = clockevent_delta2ns(50, &comparator) + 1; - -- sysreg_write(COMPARE, 0); - timer_irqaction.dev_id = &comparator; - - ret = setup_irq(0, &timer_irqaction); -diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile -index 514c9a9..79ef59b 100644 ---- a/arch/avr32/mach-at32ap/Makefile -+++ b/arch/avr32/mach-at32ap/Makefile -@@ -1,9 +1,14 @@ --obj-y += pdc.o clock.o intc.o extint.o pio.o hsmc.o -+obj-y += pdc.o clock.o intc.o extint.o hsmc.o - obj-y += hmatrix.o --obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o -+obj-$(CONFIG_PORTMUX_PIO) += pio.o -+obj-$(CONFIG_PORTMUX_GPIO_V2) += gpio-v2.o -+obj-$(CONFIG_TIMER_AST) += timer-ast.o - obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o - obj-$(CONFIG_PM) += pm.o - -+obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o -+obj-$(CONFIG_CPU_AT32AP720X) += at32ap720x.o pm-at32ap720x.o -+ - ifeq ($(CONFIG_PM_DEBUG),y) - CFLAGS_pm.o += -DDEBUG - endif -diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c -index e01dbe4..7e83326 100644 ---- a/arch/avr32/mach-at32ap/at32ap700x.c -+++ b/arch/avr32/mach-at32ap/at32ap700x.c -@@ -23,6 +23,7 @@ - #include <mach/at32ap700x.h> - #include <mach/board.h> - #include <mach/hmatrix.h> -+#include <mach/pm.h> - #include <mach/portmux.h> - #include <mach/sram.h> - -@@ -30,7 +31,7 @@ - - #include "clock.h" - #include "pio.h" --#include "pm.h" -+#include "pm-v1.h" - - - #define PBMEM(base) \ -@@ -82,8 +83,9 @@ static struct platform_device _name##_id##_device = { \ - .num_resources = ARRAY_SIZE(_name##_id##_resource), \ - } - --#define select_peripheral(pin, periph, flags) \ -- at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags) -+#define select_peripheral(port, pin_mask, periph, flags) \ -+ at32_select_periph(GPIO_##port##_BASE, pin_mask, \ -+ GPIO_##periph, flags) - - #define DEV_CLK(_name, devname, bus, _index) \ - static struct clk devname##_##_name = { \ -@@ -812,7 +814,7 @@ static struct resource pio4_resource[] = { - DEFINE_DEV(pio, 4); - DEV_CLK(mck, pio4, pba, 14); - --void __init at32_add_system_devices(void) -+static int __init system_device_init(void) - { - platform_device_register(&at32_pm0_device); - platform_device_register(&at32_intc0_device); -@@ -831,7 +833,10 @@ void __init at32_add_system_devices(void) - platform_device_register(&pio2_device); - platform_device_register(&pio3_device); - platform_device_register(&pio4_device); -+ -+ return 0; - } -+core_initcall(system_device_init); - - /* -------------------------------------------------------------------- - * PSIF -@@ -871,6 +876,7 @@ static struct clk atmel_psif1_pclk = { - struct platform_device *__init at32_add_device_psif(unsigned int id) - { - struct platform_device *pdev; -+ u32 pin_mask; - - if (!(id == 0 || id == 1)) - return NULL; -@@ -881,20 +887,22 @@ struct platform_device *__init at32_add_device_psif(unsigned int id) - - switch (id) { - case 0: -+ pin_mask = (1 << 8) | (1 << 9); /* CLOCK & DATA */ -+ - if (platform_device_add_resources(pdev, atmel_psif0_resource, - ARRAY_SIZE(atmel_psif0_resource))) - goto err_add_resources; - atmel_psif0_pclk.dev = &pdev->dev; -- select_peripheral(PA(8), PERIPH_A, 0); /* CLOCK */ -- select_peripheral(PA(9), PERIPH_A, 0); /* DATA */ -+ select_peripheral(PIOA, pin_mask, PERIPH_A, 0); - break; - case 1: -+ pin_mask = (1 << 11) | (1 << 12); /* CLOCK & DATA */ -+ - if (platform_device_add_resources(pdev, atmel_psif1_resource, - ARRAY_SIZE(atmel_psif1_resource))) - goto err_add_resources; - atmel_psif1_pclk.dev = &pdev->dev; -- select_peripheral(PB(11), PERIPH_A, 0); /* CLOCK */ -- select_peripheral(PB(12), PERIPH_A, 0); /* DATA */ -+ select_peripheral(PIOB, pin_mask, PERIPH_A, 0); - break; - default: - return NULL; -@@ -958,26 +966,30 @@ DEV_CLK(usart, atmel_usart3, pba, 6); - - static inline void configure_usart0_pins(void) - { -- select_peripheral(PA(8), PERIPH_B, 0); /* RXD */ -- select_peripheral(PA(9), PERIPH_B, 0); /* TXD */ -+ u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */ -+ -+ select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); - } - - static inline void configure_usart1_pins(void) - { -- select_peripheral(PA(17), PERIPH_A, 0); /* RXD */ -- select_peripheral(PA(18), PERIPH_A, 0); /* TXD */ -+ u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */ -+ -+ select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP); - } - - static inline void configure_usart2_pins(void) - { -- select_peripheral(PB(26), PERIPH_B, 0); /* RXD */ -- select_peripheral(PB(27), PERIPH_B, 0); /* TXD */ -+ u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */ -+ -+ select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); - } - - static inline void configure_usart3_pins(void) - { -- select_peripheral(PB(18), PERIPH_B, 0); /* RXD */ -- select_peripheral(PB(17), PERIPH_B, 0); /* TXD */ -+ u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */ -+ -+ select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); - } - - static struct platform_device *__initdata at32_usarts[4]; -@@ -1057,59 +1069,73 @@ struct platform_device *__init - at32_add_device_eth(unsigned int id, struct eth_platform_data *data) - { - struct platform_device *pdev; -+ u32 pin_mask; - - switch (id) { - case 0: - pdev = &macb0_device; - -- select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */ -- select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */ -- select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */ -- select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */ -- select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */ -- select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */ -- select_peripheral(PC(13), PERIPH_A, 0); /* RXER */ -- select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */ -- select_peripheral(PC(16), PERIPH_A, 0); /* MDC */ -- select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */ -+ pin_mask = (1 << 3); /* TXD0 */ -+ pin_mask |= (1 << 4); /* TXD1 */ -+ pin_mask |= (1 << 7); /* TXEN */ -+ pin_mask |= (1 << 8); /* TXCK */ -+ pin_mask |= (1 << 9); /* RXD0 */ -+ pin_mask |= (1 << 10); /* RXD1 */ -+ pin_mask |= (1 << 13); /* RXER */ -+ pin_mask |= (1 << 15); /* RXDV */ -+ pin_mask |= (1 << 16); /* MDC */ -+ pin_mask |= (1 << 17); /* MDIO */ - - if (!data->is_rmii) { -- select_peripheral(PC(0), PERIPH_A, 0); /* COL */ -- select_peripheral(PC(1), PERIPH_A, 0); /* CRS */ -- select_peripheral(PC(2), PERIPH_A, 0); /* TXER */ -- select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */ -- select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */ -- select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */ -- select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */ -- select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */ -- select_peripheral(PC(18), PERIPH_A, 0); /* SPD */ -+ pin_mask |= (1 << 0); /* COL */ -+ pin_mask |= (1 << 1); /* CRS */ -+ pin_mask |= (1 << 2); /* TXER */ -+ pin_mask |= (1 << 5); /* TXD2 */ -+ pin_mask |= (1 << 6); /* TXD3 */ -+ pin_mask |= (1 << 11); /* RXD2 */ -+ pin_mask |= (1 << 12); /* RXD3 */ -+ pin_mask |= (1 << 14); /* RXCK */ -+#ifndef CONFIG_BOARD_MIMC200 -+ pin_mask |= (1 << 18); /* SPD */ -+#endif - } -+ -+ select_peripheral(PIOC, pin_mask, PERIPH_A, 0); -+ - break; - - case 1: - pdev = &macb1_device; - -- select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */ -- select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */ -- select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */ -- select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */ -- select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */ -- select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */ -- select_peripheral(PD(5), PERIPH_B, 0); /* RXER */ -- select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */ -- select_peripheral(PD(3), PERIPH_B, 0); /* MDC */ -- select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */ -+ pin_mask = (1 << 13); /* TXD0 */ -+ pin_mask |= (1 << 14); /* TXD1 */ -+ pin_mask |= (1 << 11); /* TXEN */ -+ pin_mask |= (1 << 12); /* TXCK */ -+ pin_mask |= (1 << 10); /* RXD0 */ -+ pin_mask |= (1 << 6); /* RXD1 */ -+ pin_mask |= (1 << 5); /* RXER */ -+ pin_mask |= (1 << 4); /* RXDV */ -+ pin_mask |= (1 << 3); /* MDC */ -+ pin_mask |= (1 << 2); /* MDIO */ -+ -+#ifndef CONFIG_BOARD_MIMC200 -+ if (!data->is_rmii) -+ pin_mask |= (1 << 15); /* SPD */ -+#endif -+ -+ select_peripheral(PIOD, pin_mask, PERIPH_B, 0); - - if (!data->is_rmii) { -- select_peripheral(PC(19), PERIPH_B, 0); /* COL */ -- select_peripheral(PC(23), PERIPH_B, 0); /* CRS */ -- select_peripheral(PC(26), PERIPH_B, 0); /* TXER */ -- select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */ -- select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */ -- select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */ -- select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */ -- select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */ -- select_peripheral(PD(15), PERIPH_B, 0); /* SPD */ -+ pin_mask = (1 << 19); /* COL */ -+ pin_mask |= (1 << 23); /* CRS */ -+ pin_mask |= (1 << 26); /* TXER */ -+ pin_mask |= (1 << 27); /* TXD2 */ -+ pin_mask |= (1 << 28); /* TXD3 */ -+ pin_mask |= (1 << 29); /* RXD2 */ -+ pin_mask |= (1 << 30); /* RXD3 */ -+ pin_mask |= (1 << 24); /* RXCK */ -+ -+ select_peripheral(PIOC, pin_mask, PERIPH_B, 0); - } - break; - -@@ -1130,6 +1156,7 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data) - static struct resource atmel_spi0_resource[] = { - PBMEM(0xffe00000), - IRQ(3), -+ { 0 }, /* SRAM buffer, if available */ - }; - DEFINE_DEV(atmel_spi, 0); - DEV_CLK(spi_clk, atmel_spi0, pba, 0); -@@ -1137,6 +1164,7 @@ DEV_CLK(spi_clk, atmel_spi0, pba, 0); - static struct resource atmel_spi1_resource[] = { - PBMEM(0xffe00400), - IRQ(4), -+ { 0 }, /* SRAM buffer, if available */ - }; - DEFINE_DEV(atmel_spi, 1); - DEV_CLK(spi_clk, atmel_spi1, pba, 1); -@@ -1166,6 +1194,8 @@ at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b, - struct platform_device *__init - at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n) - { -+ unsigned long sram_buf; -+ - /* - * Manage the chipselects as GPIOs, normally using the same pins - * the SPI controller expects; but boards can use other pins. -@@ -1177,23 +1207,28 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n) - { GPIO_PIN_PB(2), GPIO_PIN_PB(3), - GPIO_PIN_PB(4), GPIO_PIN_PA(27), }; - struct platform_device *pdev; -+ u32 pin_mask; - - switch (id) { - case 0: - pdev = &atmel_spi0_device; -+ pin_mask = (1 << 1) | (1 << 2); /* MOSI & SCK */ -+ - /* pullup MISO so a level is always defined */ -- select_peripheral(PA(0), PERIPH_A, AT32_GPIOF_PULLUP); -- select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */ -- select_peripheral(PA(2), PERIPH_A, 0); /* SCK */ -+ select_peripheral(PIOA, (1 << 0), PERIPH_A, AT32_GPIOF_PULLUP); -+ select_peripheral(PIOA, pin_mask, PERIPH_A, 0); -+ - at32_spi_setup_slaves(0, b, n, spi0_pins); - break; - - case 1: - pdev = &atmel_spi1_device; -+ pin_mask = (1 << 1) | (1 << 5); /* MOSI */ -+ - /* pullup MISO so a level is always defined */ -- select_peripheral(PB(0), PERIPH_B, AT32_GPIOF_PULLUP); -- select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */ -- select_peripheral(PB(5), PERIPH_B, 0); /* SCK */ -+ select_peripheral(PIOB, (1 << 0), PERIPH_B, AT32_GPIOF_PULLUP); -+ select_peripheral(PIOB, pin_mask, PERIPH_B, 0); -+ - at32_spi_setup_slaves(1, b, n, spi1_pins); - break; - -@@ -1201,6 +1236,13 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n) - return NULL; - } - -+ sram_buf = sram_alloc(4096); -+ if (sram_buf) { -+ pdev->resource[2].start = sram_buf; -+ pdev->resource[2].end = sram_buf + 4096 - 1; -+ pdev->resource[2].flags = IORESOURCE_MEM; -+ } -+ - spi_register_board_info(b, n); - platform_device_register(pdev); - return pdev; -@@ -1226,6 +1268,7 @@ struct platform_device *__init at32_add_device_twi(unsigned int id, - unsigned int n) - { - struct platform_device *pdev; -+ u32 pin_mask; - - if (id != 0) - return NULL; -@@ -1238,8 +1281,9 @@ struct platform_device *__init at32_add_device_twi(unsigned int id, - ARRAY_SIZE(atmel_twi0_resource))) - goto err_add_resources; - -- select_peripheral(PA(6), PERIPH_A, 0); /* SDA */ -- select_peripheral(PA(7), PERIPH_A, 0); /* SDL */ -+ pin_mask = (1 << 6) | (1 << 7); /* SDA & SDL */ -+ -+ select_peripheral(PIOA, pin_mask, PERIPH_A, 0); - - atmel_twi0_pclk.dev = &pdev->dev; - -@@ -1272,10 +1316,16 @@ static struct clk atmel_mci0_pclk = { - struct platform_device *__init - at32_add_device_mci(unsigned int id, struct mci_platform_data *data) - { -- struct mci_platform_data _data; - struct platform_device *pdev; -+ struct dw_dma_slave *dws; -+ u32 pioa_mask; -+ u32 piob_mask; - -- if (id != 0) -+ if (id != 0 || !data) -+ return NULL; -+ -+ /* Must have at least one usable slot */ -+ if (!data->slot[0].bus_width && !data->slot[1].bus_width) - return NULL; - - pdev = platform_device_alloc("atmel_mci", id); -@@ -1286,28 +1336,80 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) - ARRAY_SIZE(atmel_mci0_resource))) - goto fail; - -- if (!data) { -- data = &_data; -- memset(data, -1, sizeof(struct mci_platform_data)); -- data->detect_pin = GPIO_PIN_NONE; -- data->wp_pin = GPIO_PIN_NONE; -- } -+ if (data->dma_slave) -+ dws = kmemdup(to_dw_dma_slave(data->dma_slave), -+ sizeof(struct dw_dma_slave), GFP_KERNEL); -+ else -+ dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL); -+ -+ dws->slave.dev = &pdev->dev; -+ dws->slave.dma_dev = &dw_dmac0_device.dev; -+ dws->slave.reg_width = DMA_SLAVE_WIDTH_32BIT; -+ dws->cfg_hi = (DWC_CFGH_SRC_PER(0) -+ | DWC_CFGH_DST_PER(1)); -+ dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL -+ | DWC_CFGL_HS_SRC_POL); -+ -+ data->dma_slave = &dws->slave; - - if (platform_device_add_data(pdev, data, - sizeof(struct mci_platform_data))) - goto fail; - -- select_peripheral(PA(10), PERIPH_A, 0); /* CLK */ -- select_peripheral(PA(11), PERIPH_A, 0); /* CMD */ -- select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */ -- select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */ -- select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */ -- select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */ -+ /* CLK line is common to both slots */ -+ pioa_mask = 1 << 10; - -- if (gpio_is_valid(data->detect_pin)) -- at32_select_gpio(data->detect_pin, 0); -- if (gpio_is_valid(data->wp_pin)) -- at32_select_gpio(data->wp_pin, 0); -+ switch (data->slot[0].bus_width) { -+ case 4: -+ pioa_mask |= 1 << 13; /* DATA1 */ -+ pioa_mask |= 1 << 14; /* DATA2 */ -+ pioa_mask |= 1 << 15; /* DATA3 */ -+ /* fall through */ -+ case 1: -+ pioa_mask |= 1 << 11; /* CMD */ -+ pioa_mask |= 1 << 12; /* DATA0 */ -+ -+ if (gpio_is_valid(data->slot[0].detect_pin)) -+ at32_select_gpio(data->slot[0].detect_pin, 0); -+ if (gpio_is_valid(data->slot[0].wp_pin)) -+ at32_select_gpio(data->slot[0].wp_pin, 0); -+ break; -+ case 0: -+ /* Slot is unused */ -+ break; -+ default: -+ goto fail; -+ } -+ -+ select_peripheral(PIOA, pioa_mask, PERIPH_A, 0); -+ piob_mask = 0; -+ -+ switch (data->slot[1].bus_width) { -+ case 4: -+ piob_mask |= 1 << 8; /* DATA1 */ -+ piob_mask |= 1 << 9; /* DATA2 */ -+ piob_mask |= 1 << 10; /* DATA3 */ -+ /* fall through */ -+ case 1: -+ piob_mask |= 1 << 6; /* CMD */ -+ piob_mask |= 1 << 7; /* DATA0 */ -+ select_peripheral(PIOB, piob_mask, PERIPH_B, 0); -+ -+ if (gpio_is_valid(data->slot[1].detect_pin)) -+ at32_select_gpio(data->slot[1].detect_pin, 0); -+ if (gpio_is_valid(data->slot[1].wp_pin)) -+ at32_select_gpio(data->slot[1].wp_pin, 0); -+ break; -+ case 0: -+ /* Slot is unused */ -+ break; -+ default: -+ if (!data->slot[0].bus_width) -+ goto fail; -+ -+ data->slot[1].bus_width = 0; -+ break; -+ } - - atmel_mci0_pclk.dev = &pdev->dev; - -@@ -1353,13 +1455,14 @@ static struct clk atmel_lcdfb0_pixclk = { - struct platform_device *__init - at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, - unsigned long fbmem_start, unsigned long fbmem_len, -- unsigned int pin_config) -+ u64 pin_mask) - { - struct platform_device *pdev; - struct atmel_lcdfb_info *info; - struct fb_monspecs *monspecs; - struct fb_videomode *modedb; - unsigned int modedb_size; -+ u32 portc_mask, portd_mask, porte_mask; - - /* - * Do a deep copy of the fb data, monspecs and modedb. Make -@@ -1381,76 +1484,21 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, - case 0: - pdev = &atmel_lcdfb0_device; - -- switch (pin_config) { -- case 0: -- select_peripheral(PC(19), PERIPH_A, 0); /* CC */ -- select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */ -- select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */ -- select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */ -- select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */ -- select_peripheral(PC(24), PERIPH_A, 0); /* MODE */ -- select_peripheral(PC(25), PERIPH_A, 0); /* PWR */ -- select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */ -- select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */ -- select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */ -- select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */ -- select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */ -- select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */ -- select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */ -- select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */ -- select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */ -- select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */ -- select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */ -- select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */ -- select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */ -- select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */ -- select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */ -- select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */ -- select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */ -- select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */ -- select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */ -- select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */ -- select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */ -- select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */ -- select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */ -- select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */ -- break; -- case 1: -- select_peripheral(PE(0), PERIPH_B, 0); /* CC */ -- select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */ -- select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */ -- select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */ -- select_peripheral(PE(1), PERIPH_B, 0); /* DVAL */ -- select_peripheral(PE(2), PERIPH_B, 0); /* MODE */ -- select_peripheral(PC(25), PERIPH_A, 0); /* PWR */ -- select_peripheral(PE(3), PERIPH_B, 0); /* DATA0 */ -- select_peripheral(PE(4), PERIPH_B, 0); /* DATA1 */ -- select_peripheral(PE(5), PERIPH_B, 0); /* DATA2 */ -- select_peripheral(PE(6), PERIPH_B, 0); /* DATA3 */ -- select_peripheral(PE(7), PERIPH_B, 0); /* DATA4 */ -- select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */ -- select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */ -- select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */ -- select_peripheral(PE(8), PERIPH_B, 0); /* DATA8 */ -- select_peripheral(PE(9), PERIPH_B, 0); /* DATA9 */ -- select_peripheral(PE(10), PERIPH_B, 0); /* DATA10 */ -- select_peripheral(PE(11), PERIPH_B, 0); /* DATA11 */ -- select_peripheral(PE(12), PERIPH_B, 0); /* DATA12 */ -- select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */ -- select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */ -- select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */ -- select_peripheral(PE(13), PERIPH_B, 0); /* DATA16 */ -- select_peripheral(PE(14), PERIPH_B, 0); /* DATA17 */ -- select_peripheral(PE(15), PERIPH_B, 0); /* DATA18 */ -- select_peripheral(PE(16), PERIPH_B, 0); /* DATA19 */ -- select_peripheral(PE(17), PERIPH_B, 0); /* DATA20 */ -- select_peripheral(PE(18), PERIPH_B, 0); /* DATA21 */ -- select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */ -- select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */ -- break; -- default: -- goto err_invalid_id; -- } -+ if (pin_mask == 0ULL) -+ /* Default to "full" lcdc control signals and 24bit */ -+ pin_mask = ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL; -+ -+ /* LCDC on port C */ -+ portc_mask = pin_mask & 0xfff80000; -+ select_peripheral(PIOC, portc_mask, PERIPH_A, 0); -+ -+ /* LCDC on port D */ -+ portd_mask = pin_mask & 0x0003ffff; -+ select_peripheral(PIOD, portd_mask, PERIPH_A, 0); -+ -+ /* LCDC on port E */ -+ porte_mask = (pin_mask >> 32) & 0x0007ffff; -+ select_peripheral(PIOE, porte_mask, PERIPH_B, 0); - - clk_set_parent(&atmel_lcdfb0_pixclk, &pll0); - clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0)); -@@ -1499,6 +1547,7 @@ static struct clk atmel_pwm0_mck = { - struct platform_device *__init at32_add_device_pwm(u32 mask) - { - struct platform_device *pdev; -+ u32 pin_mask; - - if (!mask) - return NULL; -@@ -1514,14 +1563,21 @@ struct platform_device *__init at32_add_device_pwm(u32 mask) - if (platform_device_add_data(pdev, &mask, sizeof(mask))) - goto out_free_pdev; - -+ pin_mask = 0; - if (mask & (1 << 0)) -- select_peripheral(PA(28), PERIPH_A, 0); -+ pin_mask |= (1 << 28); - if (mask & (1 << 1)) -- select_peripheral(PA(29), PERIPH_A, 0); -+ pin_mask |= (1 << 29); -+ if (pin_mask > 0) -+ select_peripheral(PIOA, pin_mask, PERIPH_A, 0); -+ -+ pin_mask = 0; - if (mask & (1 << 2)) -- select_peripheral(PA(21), PERIPH_B, 0); -+ pin_mask |= (1 << 21); - if (mask & (1 << 3)) -- select_peripheral(PA(22), PERIPH_B, 0); -+ pin_mask |= (1 << 22); -+ if (pin_mask > 0) -+ select_peripheral(PIOA, pin_mask, PERIPH_B, 0); - - atmel_pwm0_mck.dev = &pdev->dev; - -@@ -1562,52 +1618,65 @@ struct platform_device *__init - at32_add_device_ssc(unsigned int id, unsigned int flags) - { - struct platform_device *pdev; -+ u32 pin_mask = 0; - - switch (id) { - case 0: - pdev = &ssc0_device; - if (flags & ATMEL_SSC_RF) -- select_peripheral(PA(21), PERIPH_A, 0); /* RF */ -+ pin_mask |= (1 << 21); /* RF */ - if (flags & ATMEL_SSC_RK) -- select_peripheral(PA(22), PERIPH_A, 0); /* RK */ -+ pin_mask |= (1 << 22); /* RK */ - if (flags & ATMEL_SSC_TK) -- select_peripheral(PA(23), PERIPH_A, 0); /* TK */ -+ pin_mask |= (1 << 23); /* TK */ - if (flags & ATMEL_SSC_TF) -- select_peripheral(PA(24), PERIPH_A, 0); /* TF */ -+ pin_mask |= (1 << 24); /* TF */ - if (flags & ATMEL_SSC_TD) -- select_peripheral(PA(25), PERIPH_A, 0); /* TD */ -+ pin_mask |= (1 << 25); /* TD */ - if (flags & ATMEL_SSC_RD) -- select_peripheral(PA(26), PERIPH_A, 0); /* RD */ -+ pin_mask |= (1 << 26); /* RD */ -+ -+ if (pin_mask > 0) -+ select_peripheral(PIOA, pin_mask, PERIPH_A, 0); -+ - break; - case 1: - pdev = &ssc1_device; - if (flags & ATMEL_SSC_RF) -- select_peripheral(PA(0), PERIPH_B, 0); /* RF */ -+ pin_mask |= (1 << 0); /* RF */ - if (flags & ATMEL_SSC_RK) -- select_peripheral(PA(1), PERIPH_B, 0); /* RK */ -+ pin_mask |= (1 << 1); /* RK */ - if (flags & ATMEL_SSC_TK) -- select_peripheral(PA(2), PERIPH_B, 0); /* TK */ -+ pin_mask |= (1 << 2); /* TK */ - if (flags & ATMEL_SSC_TF) -- select_peripheral(PA(3), PERIPH_B, 0); /* TF */ -+ pin_mask |= (1 << 3); /* TF */ - if (flags & ATMEL_SSC_TD) -- select_peripheral(PA(4), PERIPH_B, 0); /* TD */ -+ pin_mask |= (1 << 4); /* TD */ - if (flags & ATMEL_SSC_RD) -- select_peripheral(PA(5), PERIPH_B, 0); /* RD */ -+ pin_mask |= (1 << 5); /* RD */ -+ -+ if (pin_mask > 0) -+ select_peripheral(PIOA, pin_mask, PERIPH_B, 0); -+ - break; - case 2: - pdev = &ssc2_device; - if (flags & ATMEL_SSC_TD) -- select_peripheral(PB(13), PERIPH_A, 0); /* TD */ -+ pin_mask |= (1 << 13); /* TD */ - if (flags & ATMEL_SSC_RD) -- select_peripheral(PB(14), PERIPH_A, 0); /* RD */ -+ pin_mask |= (1 << 14); /* RD */ - if (flags & ATMEL_SSC_TK) -- select_peripheral(PB(15), PERIPH_A, 0); /* TK */ -+ pin_mask |= (1 << 15); /* TK */ - if (flags & ATMEL_SSC_TF) -- select_peripheral(PB(16), PERIPH_A, 0); /* TF */ -+ pin_mask |= (1 << 16); /* TF */ - if (flags & ATMEL_SSC_RF) -- select_peripheral(PB(17), PERIPH_A, 0); /* RF */ -+ pin_mask |= (1 << 17); /* RF */ - if (flags & ATMEL_SSC_RK) -- select_peripheral(PB(18), PERIPH_A, 0); /* RK */ -+ pin_mask |= (1 << 18); /* RK */ -+ -+ if (pin_mask > 0) -+ select_peripheral(PIOB, pin_mask, PERIPH_A, 0); -+ - break; - default: - return NULL; -@@ -1745,14 +1814,15 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev, - unsigned int cs, unsigned int extint) - { - static unsigned int extint_pin_map[4] __initdata = { -- GPIO_PIN_PB(25), -- GPIO_PIN_PB(26), -- GPIO_PIN_PB(27), -- GPIO_PIN_PB(28), -+ (1 << 25), -+ (1 << 26), -+ (1 << 27), -+ (1 << 28), - }; - static bool common_pins_initialized __initdata = false; - unsigned int extint_pin; - int ret; -+ u32 pin_mask; - - if (extint >= ARRAY_SIZE(extint_pin_map)) - return -EINVAL; -@@ -1766,7 +1836,8 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev, - if (ret) - return ret; - -- select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 -> OE_N */ -+ /* NCS4 -> OE_N */ -+ select_peripheral(PIOE, (1 << 21), PERIPH_A, 0); - hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF0_ENABLE); - break; - case 5: -@@ -1776,7 +1847,8 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev, - if (ret) - return ret; - -- select_peripheral(PE(22), PERIPH_A, 0); /* NCS5 -> OE_N */ -+ /* NCS5 -> OE_N */ -+ select_peripheral(PIOE, (1 << 22), PERIPH_A, 0); - hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF1_ENABLE); - break; - default: -@@ -1784,14 +1856,17 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev, - } - - if (!common_pins_initialized) { -- select_peripheral(PE(19), PERIPH_A, 0); /* CFCE1 -> CS0_N */ -- select_peripheral(PE(20), PERIPH_A, 0); /* CFCE2 -> CS1_N */ -- select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW -> DIR */ -- select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT <- IORDY */ -+ pin_mask = (1 << 19); /* CFCE1 -> CS0_N */ -+ pin_mask |= (1 << 20); /* CFCE2 -> CS1_N */ -+ pin_mask |= (1 << 23); /* CFRNW -> DIR */ -+ pin_mask |= (1 << 24); /* NWAIT <- IORDY */ -+ -+ select_peripheral(PIOE, pin_mask, PERIPH_A, 0); -+ - common_pins_initialized = true; - } - -- at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH); -+ select_peripheral(PIOB, extint_pin, PERIPH_A, AT32_GPIOF_DEGLITCH); - - pdev->resource[1].start = EIM_IRQ_BASE + extint; - pdev->resource[1].end = pdev->resource[1].start; -@@ -1930,6 +2005,7 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data) - { - struct platform_device *pdev; - struct ac97c_platform_data _data; -+ u32 pin_mask; - - if (id != 0) - return NULL; -@@ -1956,10 +2032,10 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data) - sizeof(struct ac97c_platform_data))) - goto fail; - -- select_peripheral(PB(20), PERIPH_B, 0); /* SDO */ -- select_peripheral(PB(21), PERIPH_B, 0); /* SYNC */ -- select_peripheral(PB(22), PERIPH_B, 0); /* SCLK */ -- select_peripheral(PB(23), PERIPH_B, 0); /* SDI */ -+ pin_mask = (1 << 20) | (1 << 21); /* SDO & SYNC */ -+ pin_mask |= (1 << 22) | (1 << 23); /* SCLK & SDI */ -+ -+ select_peripheral(PIOB, pin_mask, PERIPH_B, 0); - - /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */ - if (data->reset_pin != GPIO_PIN_NONE) -@@ -2001,6 +2077,7 @@ static struct clk abdac0_sample_clk = { - struct platform_device *__init at32_add_device_abdac(unsigned int id) - { - struct platform_device *pdev; -+ u32 pin_mask; - - if (id != 0) - return NULL; -@@ -2013,10 +2090,10 @@ struct platform_device *__init at32_add_device_abdac(unsigned int id) - ARRAY_SIZE(abdac0_resource))) - goto err_add_resources; - -- select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */ -- select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */ -- select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */ -- select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */ -+ pin_mask = (1 << 20) | (1 << 22); /* DATA1 & DATAN1 */ -+ pin_mask |= (1 << 21) | (1 << 23); /* DATA0 & DATAN0 */ -+ -+ select_peripheral(PIOB, pin_mask, PERIPH_A, 0); - - abdac0_pclk.dev = &pdev->dev; - abdac0_sample_clk.dev = &pdev->dev; -@@ -2073,7 +2150,7 @@ static struct clk gclk4 = { - .index = 4, - }; - --struct clk *at32_clock_list[] = { -+static __initdata struct clk *init_clocks[] = { - &osc32k, - &osc0, - &osc1, -@@ -2137,7 +2214,6 @@ struct clk *at32_clock_list[] = { - &gclk3, - &gclk4, - }; --unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list); - - void __init setup_platform(void) - { -@@ -2168,14 +2244,19 @@ void __init setup_platform(void) - genclk_init_parent(&abdac0_sample_clk); - - /* -- * Turn on all clocks that have at least one user already, and -- * turn off everything else. We only do this for module -- * clocks, and even though it isn't particularly pretty to -- * check the address of the mode function, it should do the -- * trick... -+ * Build initial dynamic clock list by registering all clocks -+ * from the array. -+ * At the same time, turn on all clocks that have at least one -+ * user already, and turn off everything else. We only do this -+ * for module clocks, and even though it isn't particularly -+ * pretty to check the address of the mode function, it should -+ * do the trick... - */ -- for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) { -- struct clk *clk = at32_clock_list[i]; -+ for (i = 0; i < ARRAY_SIZE(init_clocks); i++) { -+ struct clk *clk = init_clocks[i]; -+ -+ /* first, register clock */ -+ at32_clk_register(clk); - - if (clk->users == 0) - continue; -@@ -2203,6 +2284,11 @@ void __init setup_platform(void) - at32_init_pio(&pio4_device); - } - -+unsigned long at32_get_reset_cause(void) -+{ -+ return pm_readl(RCAUSE); -+} -+ - struct gen_pool *sram_pool; - - static int __init sram_init(void) -diff --git a/arch/avr32/mach-at32ap/at32ap720x.c b/arch/avr32/mach-at32ap/at32ap720x.c -new file mode 100644 -index 0000000..0cb675a ---- /dev/null -+++ b/arch/avr32/mach-at32ap/at32ap720x.c -@@ -0,0 +1,2303 @@ -+/* -+ * Copyright (C) 2008 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include <linux/atmel_pdca.h> -+#include <linux/clk.h> -+#include <linux/delay.h> -+#include <linux/dma-mapping.h> -+#include <linux/dw_dmac.h> -+#include <linux/errno.h> -+#include <linux/fb.h> -+#include <linux/gpio.h> -+#include <linux/io.h> -+#include <linux/ioport.h> -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <linux/pm.h> -+#include <linux/spinlock.h> -+#include <linux/spi/atmel_spi.h> -+#include <linux/spi/spi.h> -+#include <video/atmel_lcdc.h> -+#include <video/atmel_mpop.h> -+ -+#include <asm/ast_regs.h> -+#include <asm/atmel-mci.h> -+ -+#include <mach/at32ap720x.h> -+#include <mach/board.h> -+#include <mach/hmatrix.h> -+#include <mach/init.h> -+#include <mach/pm.h> -+#include <mach/portmux.h> -+#include <mach/sram.h> -+ -+#include "clock.h" -+#include "gpio-v2.h" -+#include "pm-v3.h" -+#include "sdc.h" -+ -+#define PBMEM(base) \ -+ { \ -+ .start = base, \ -+ .end = base + 0x3ff, \ -+ .flags = IORESOURCE_MEM, \ -+ } -+#define IRQ(num) \ -+ { \ -+ .start = num, \ -+ .end = num, \ -+ .flags = IORESOURCE_IRQ, \ -+ } -+ -+#define select_peripheral(port, pin_mask, periph, flags) \ -+ at32_select_periph(GPIO_##port##_BASE, pin_mask, \ -+ GPIO_##periph, flags) -+ -+#define DEV_CLK(_name, devname, bus, _index) \ -+static struct clk devname##_##_name = { \ -+ .name = #_name, \ -+ .dev = &devname##_device.dev, \ -+ .parent = &bus##_clk, \ -+ .mode = bus##_clk_mode, \ -+ .get_rate = bus##_clk_get_rate, \ -+ .index = _index, \ -+} -+ -+static DEFINE_SPINLOCK(pm_lock); -+ -+static unsigned long rcosc_get_rate(struct clk *clk) -+{ -+ return 32768; -+} -+ -+static unsigned long osc_get_rate(struct clk *clk) -+{ -+ return at32_board_osc_rates[clk->index]; -+} -+ -+static void osc32_mode(struct clk *clk, int enabled) -+{ -+ /* We never disable the 32 kHz oscillator */ -+ if (!enabled) -+ return; -+ -+ /* If it's already running, we're done. */ -+ if (pm_readl(POSCSR) & PM_BIT(POSCSR_OSC32RDY)) -+ return; -+ -+ /* Enable it, unless someone did it for us already */ -+ if (!(sdc_readl(OSCCTRL32) & SDC_BIT(OSCCTRL32_OSC32EN))) { -+ u32 value; -+ -+ value = SDC_BF(OSCCTRL32_STARTUP, 5) -+ | SDC_BF(OSCCTRL32_MODE, 0xd) -+ | SDC_BIT(OSCCTRL32_OSC32EN); -+ -+ sdc_writel(OSCCTRL32, value | SDC_BF(OSCCTRL32_KEY, 0x55)); -+ sdc_writel(OSCCTRL32, value | SDC_BF(OSCCTRL32_KEY, 0xaa)); -+ } -+ -+ pr_info("Waiting for 32 kHz crystal oscillator to start...\n"); -+ -+ while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_OSC32RDY))) -+ cpu_relax(); -+} -+ -+static void oscn_mode(struct clk *clk, int enabled) -+{ -+ unsigned int i = clk->index; -+ u32 mcctrl; -+ -+ BUG_ON(i > 2); -+ -+ /* Let's keep oscillators running for now... */ -+ if (!enabled) -+ goto out; -+ -+ /* If it's already running, we're done */ -+ if (pm_readl(POSCSR) & (PM_BIT(POSCSR_OSC0RDY) << i)) -+ goto out; -+ -+ /* Enable it, unless someone did it for us already */ -+ mcctrl = pm_readl(MCCTRL); -+ if (!(mcctrl & (PM_BIT(MCCTRL_OSC0EN) << i))) { -+ /* TODO: Make OSC startup parameters configurable */ -+ pm_writel(OSCCTRL[i], PM_BF(OSCCTRLx_STARTUP, 5) -+ | PM_BF(OSCCTRLx_MODE, 0xa)); -+ pm_writel(MCCTRL, mcctrl | (PM_BIT(MCCTRL_OSC0EN) << i)); -+ } -+ -+ pr_debug("clk %s: waiting for clock to become ready...\n", clk->name); -+ pr_debug("clk %s: MCCTRL=%08x OSCCTRL%u=%08x\n", clk->name, -+ pm_readl(MCCTRL), i, pm_readl(OSCCTRL[i])); -+ -+ while (!(pm_readl(POSCSR) & (PM_BIT(POSCSR_OSC0RDY) << i))) -+ cpu_relax(); -+ -+out: -+ pr_debug("clk %s: running\n", clk->name); -+} -+ -+static struct clk rcosc = { -+ .name = "rcosc", -+ .get_rate = rcosc_get_rate, -+ .users = 1, -+}; -+static struct clk osc0 = { -+ .name = "osc0", -+ .get_rate = osc_get_rate, -+ .mode = oscn_mode, -+ .users = 1, -+ .index = 0, -+}; -+static struct clk osc1 = { -+ .name = "osc1", -+ .get_rate = osc_get_rate, -+ .mode = oscn_mode, -+ .index = 1, -+}; -+static struct clk osc2 = { -+ .name = "osc2", -+ .get_rate = osc_get_rate, -+ .mode = oscn_mode, -+ .index = 2, -+}; -+static struct clk osc32 = { -+ .name = "osc32k", -+ .get_rate = osc_get_rate, -+ .mode = osc32_mode, -+ .index = 3, -+}; -+ -+static void pll_mode(struct clk *clk, int enabled) -+{ -+ unsigned long timeout; -+ unsigned int index = clk->index; -+ u32 status; -+ u32 ctrl; -+ -+ ctrl = pm_readl(PLL[index]); -+ -+ if (enabled) { -+ if (PM_BFEXT(PLLx_PLLMUL, ctrl) <= 1) { -+ pr_debug("clk %s: failed to enable, rate not set\n", -+ clk->name); -+ return; -+ } -+ -+ ctrl |= PM_BIT(PLLx_PLLEN); -+ pm_writel(PLL[index], ctrl); -+ -+ pr_debug("clk %s: waiting for lock...\n", clk->name); -+ for (timeout = 10000; timeout; timeout--) { -+ status = pm_readl(POSCSR); -+ if (status & (PM_BIT(POSCSR_LOCK0) << index)) -+ break; -+ udelay(10); -+ } -+ -+ if (!(status & (PM_BIT(POSCSR_LOCK0) << index))) -+ pr_err("clk %s: timeout waiting for lock\n", -+ clk->name); -+ else -+ pr_debug("clk %s: running\n", clk->name); -+ } else { -+ ctrl &= ~PM_BIT(PLLx_PLLEN); -+ pm_writel(PLL[index], ctrl); -+ pr_debug("clk %s: stopped\n", clk->name); -+ } -+} -+ -+ -+static unsigned long pll_get_rate(struct clk *clk) -+{ -+ unsigned long rate; -+ unsigned int div; -+ unsigned int mul; -+ u32 ctrl; -+ -+ ctrl = pm_readl(PLL[clk->index]); -+ -+ div = PM_BFEXT(PLLx_PLLDIV, ctrl); -+ mul = PM_BFEXT(PLLx_PLLMUL, ctrl); -+ -+ rate = clk->parent->get_rate(clk->parent); -+ if (div != 0) -+ rate = (rate + div / 2) / div; -+ else -+ rate = rate * 2; -+ rate *= mul; -+ -+ if (ctrl & PM_BF(PLLx_PLLOPT, 4)) -+ rate = (rate + 1) / 2; -+ -+ return rate; -+} -+ -+static long pll_set_rate(struct clk *clk, unsigned long rate, int apply) -+{ -+ unsigned long mul_best_fit = 0; -+ unsigned long div; -+ unsigned long div_min; -+ unsigned long div_max; -+ unsigned long div_best_fit = 0; -+ unsigned long base; -+ unsigned long fvco; -+ unsigned long actual = 0; -+ unsigned long rate_error_prev = ~0UL; -+ u32 ctrl; -+ -+ /* Rate must be between 25 MHz and 400 Mhz. */ -+ if (rate < 25000000UL || rate > 400000000UL) -+ return -EINVAL; -+ -+ base = clk->parent->get_rate(clk->parent); -+ -+ /* PLL input frequency must be between 10 MHz and 200 MHz. */ -+ div_min = DIV_ROUND_UP(base, 200000000UL); -+ div_max = base / 10000000UL; -+ -+ if (div_max < div_min) -+ return -EINVAL; -+ -+ for (div = div_min; div <= div_max; div++) { -+ unsigned long mul; -+ unsigned long pll_in; -+ unsigned long rate_error; -+ -+ pll_in = (base + div / 2) / div; -+ mul = (rate + pll_in / 2) / pll_in; -+ -+ if (mul < 1) -+ continue; -+ -+ actual = pll_in * mul; -+ rate_error = abs(actual - rate); -+ -+ if (rate_error < rate_error_prev) { -+ mul_best_fit = mul; -+ div_best_fit = div; -+ rate_error_prev = rate_error; -+ } -+ -+ if (rate_error == 0) -+ break; -+ } -+ -+ if (div_best_fit == 0) -+ return -EINVAL; -+ -+ ctrl = 0; -+ fvco = actual; -+ -+ /* -+ * MUL=1 is not allowed. So we must double it and set the -+ * divide-by-two bit. -+ */ -+ if (mul_best_fit == 1) { -+ ctrl |= PM_BF(PLLx_PLLOPT, 4); -+ mul_best_fit *= 2; -+ fvco = actual * 2; -+ } -+ -+ if (fvco > 200000000) -+ ctrl |= PM_BF(PLLx_PLLOPT, 3); -+ else if (fvco > 100000000) -+ ctrl |= PM_BF(PLLx_PLLOPT, 2); -+ else if (fvco > 50000000) -+ ctrl |= PM_BF(PLLx_PLLOPT, 1); -+ -+ ctrl |= PM_BF(PLLx_PLLCOUNT, 31); -+ ctrl |= PM_BF(PLLx_PLLMUL, mul_best_fit); -+ ctrl |= PM_BF(PLLx_PLLDIV, div_best_fit); -+ ctrl |= PM_BF(PLLx_PLLOSC, clk->parent->index); -+ -+ if (apply) { -+ if (actual != rate) -+ return -EINVAL; -+ if (clk->users > 0) -+ return -EBUSY; -+ pr_debug(KERN_INFO "clk %s: new rate %lu (actual rate %lu)\n", -+ clk->name, rate, actual); -+ pm_writel(PLL[clk->index], ctrl); -+ } -+ -+ return actual; -+} -+ -+static int pll_set_parent(struct clk *clk, struct clk *parent) -+{ -+ unsigned int index = clk->index; -+ u32 ctrl; -+ -+ if (clk->users > 0) -+ return -EBUSY; -+ -+ ctrl = pm_readl(PLL[index]); -+ BUG_ON(ctrl & PM_BIT(PLLx_PLLEN)); -+ -+ ctrl = PM_BFINS(PLLx_PLLOSC, parent->index, ctrl); -+ pm_writel(PLL[index], ctrl); -+ -+ clk->parent = parent; -+ -+ return 0; -+} -+ -+static struct clk pll0 = { -+ .name = "pll0", -+ .mode = pll_mode, -+ .get_rate = pll_get_rate, -+ .set_rate = pll_set_rate, -+ .set_parent = pll_set_parent, -+ .users = 1, -+ .index = 0, -+}; -+static struct clk pll1 = { -+ .name = "pll1", -+ .mode = pll_mode, -+ .get_rate = pll_get_rate, -+ .set_rate = pll_set_rate, -+ .set_parent = pll_set_parent, -+ .users = 0, -+ .index = 1, -+}; -+static struct clk pll2 = { -+ .name = "pll2", -+ .mode = pll_mode, -+ .get_rate = pll_get_rate, -+ .set_rate = pll_set_rate, -+ .set_parent = pll_set_parent, -+ .users = 0, -+ .index = 2, -+}; -+ -+/* -+ * The main clock can be either rcosc, osc0 or pll0. The boot loader -+ * may have chosen one for us, so we don't really know which one until -+ * we have a look at the PM registers. -+ */ -+static struct clk *main_clock; -+ -+/* -+ * Synchronous clocks are generated from the main clock. The clocks -+ * must satisfy the constraint -+ * fCPU >= fHSB >= fPB -+ * i.e. each clock must not be faster than its parent. -+ */ -+static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift) -+{ -+ return main_clock->get_rate(main_clock) >> shift; -+}; -+ -+static void cpu_clk_mode(struct clk *clk, int enabled) -+{ -+ unsigned long flags; -+ u32 mask; -+ -+ spin_lock_irqsave(&pm_lock, flags); -+ -+ while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_MSKRDY))) -+ cpu_relax(); -+ -+ mask = pm_readl(CPUMASK); -+ if (enabled) -+ mask |= 1 << clk->index; -+ else -+ mask &= ~(1 << clk->index); -+ pm_writel(CPUMASK, mask); -+ spin_unlock_irqrestore(&pm_lock, flags); -+} -+ -+static unsigned long cpu_clk_get_rate(struct clk *clk) -+{ -+ unsigned long cksel, shift = 0; -+ -+ cksel = pm_readl(CKSEL); -+ if (cksel & PM_BIT(CKSEL_CPUDIV)) -+ shift = PM_BFEXT(CKSEL_CPUSEL, cksel) + 1; -+ -+ return bus_clk_get_rate(clk, shift); -+} -+ -+static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply) -+{ -+ u32 control; -+ unsigned long parent_rate, child_div, actual_rate, div; -+ -+ parent_rate = clk->parent->get_rate(clk->parent); -+ control = pm_readl(CKSEL); -+ -+ if (control & PM_BIT(CKSEL_HSBDIV)) -+ child_div = 1 << (PM_BFEXT(CKSEL_HSBSEL, control) + 1); -+ else -+ child_div = 1; -+ -+ if (rate > 3 * (parent_rate / 4) || child_div == 1) { -+ actual_rate = parent_rate; -+ control &= ~PM_BIT(CKSEL_CPUDIV); -+ } else { -+ unsigned int cpusel; -+ div = (parent_rate + rate / 2) / rate; -+ if (div > child_div) -+ div = child_div; -+ cpusel = (div > 1) ? (fls(div) - 2) : 0; -+ control = PM_BIT(CKSEL_CPUDIV) -+ | PM_BFINS(CKSEL_CPUSEL, cpusel, control); -+ actual_rate = parent_rate / (1 << (cpusel + 1)); -+ } -+ -+ pr_debug("clk %s: new rate %lu (actual rate %lu)\n", -+ clk->name, rate, actual_rate); -+ -+ if (apply) { -+ while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_CKRDY))) -+ cpu_relax(); -+ -+ pm_writel(CKSEL, control); -+ } -+ -+ return actual_rate; -+} -+ -+static void hsb_clk_mode(struct clk *clk, int enabled) -+{ -+ unsigned long flags; -+ u32 mask; -+ -+ spin_lock_irqsave(&pm_lock, flags); -+ -+ while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_MSKRDY))) -+ cpu_relax(); -+ -+ mask = pm_readl(HSBMASK); -+ if (enabled) -+ mask |= 1 << clk->index; -+ else -+ mask &= ~(1 << clk->index); -+ pm_writel(HSBMASK, mask); -+ spin_unlock_irqrestore(&pm_lock, flags); -+} -+ -+static unsigned long hsb_clk_get_rate(struct clk *clk) -+{ -+ unsigned long cksel, shift = 0; -+ -+ cksel = pm_readl(CKSEL); -+ if (cksel & PM_BIT(CKSEL_HSBDIV)) -+ shift = PM_BFEXT(CKSEL_HSBSEL, cksel) + 1; -+ -+ return bus_clk_get_rate(clk, shift); -+} -+ -+static void pba_clk_mode(struct clk *clk, int enabled) -+{ -+ unsigned long flags; -+ u32 mask; -+ -+ spin_lock_irqsave(&pm_lock, flags); -+ -+ while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_MSKRDY))) -+ cpu_relax(); -+ -+ mask = pm_readl(PBAMASK); -+ if (enabled) -+ mask |= 1 << clk->index; -+ else -+ mask &= ~(1 << clk->index); -+ pm_writel(PBAMASK, mask); -+ spin_unlock_irqrestore(&pm_lock, flags); -+} -+ -+static unsigned long pba_clk_get_rate(struct clk *clk) -+{ -+ unsigned long cksel, shift = 0; -+ -+ cksel = pm_readl(CKSEL); -+ if (cksel & PM_BIT(CKSEL_PBADIV)) -+ shift = PM_BFEXT(CKSEL_PBASEL, cksel) + 1; -+ -+ return bus_clk_get_rate(clk, shift); -+} -+ -+static void pbb_clk_mode(struct clk *clk, int enabled) -+{ -+ unsigned long flags; -+ u32 mask; -+ -+ spin_lock_irqsave(&pm_lock, flags); -+ -+ while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_MSKRDY))) -+ cpu_relax(); -+ -+ mask = pm_readl(PBBMASK); -+ if (enabled) -+ mask |= 1 << clk->index; -+ else -+ mask &= ~(1 << clk->index); -+ pm_writel(PBBMASK, mask); -+ spin_unlock_irqrestore(&pm_lock, flags); -+} -+ -+static unsigned long pbb_clk_get_rate(struct clk *clk) -+{ -+ unsigned long cksel, shift = 0; -+ -+ cksel = pm_readl(CKSEL); -+ if (cksel & PM_BIT(CKSEL_PBBDIV)) -+ shift = PM_BFEXT(CKSEL_PBBSEL, cksel) + 1; -+ -+ return bus_clk_get_rate(clk, shift); -+} -+ -+static struct clk cpu_clk = { -+ .name = "cpu", -+ .get_rate = cpu_clk_get_rate, -+ .set_rate = cpu_clk_set_rate, -+ .users = 1, -+}; -+static struct clk hsb_clk = { -+ .name = "hsb", -+ .parent = &cpu_clk, -+ .get_rate = hsb_clk_get_rate, -+}; -+static struct clk pba_clk = { -+ .name = "pba", -+ .parent = &hsb_clk, -+ .mode = hsb_clk_mode, -+ .get_rate = pba_clk_get_rate, -+ .users = 1, -+ .index = 1, -+}; -+static struct clk pbb_clk = { -+ .name = "pbb", -+ .parent = &hsb_clk, -+ .mode = hsb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .users = 1, -+ .index = 2, -+}; -+static struct clk pbc_clk = { -+ .name = "pbc", -+ .parent = &hsb_clk, -+ .mode = hsb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .index = 3, -+}; -+ -+/* -------------------------------------------------------------------- -+ * Generic Clocks -+ * -------------------------------------------------------------------- */ -+ -+/* Mapping from GCCTRL:OSCSEL values to parent clocks */ -+static struct clk *const genclk_parent[] = { -+ &rcosc, -+ &osc32, -+ &osc0, -+ &osc1, -+ &osc2, -+ &pll0, -+ &pll1, -+ &pll2, -+ &cpu_clk, -+ &hsb_clk, -+ &pba_clk, -+ &pbb_clk, -+}; -+ -+#define NR_GENERIC_CLOCKS 8 -+ -+static void genclk_mode(struct clk *clk, int enabled) -+{ -+ u32 control; -+ -+ control = pm_readl(GCCTRL[clk->index]); -+ if (enabled) -+ control |= PM_BIT(GCCTRL_CEN); -+ else -+ control &= PM_BIT(GCCTRL_CEN); -+ pm_writel(GCCTRL[clk->index], control); -+} -+ -+static unsigned long genclk_get_rate(struct clk *clk) -+{ -+ u32 control; -+ unsigned long div = 1; -+ -+ control = pm_readl(GCCTRL[clk->index]); -+ if (control & PM_BIT(GCCTRL_DIVEN)) -+ div = 2 * (PM_BFEXT(GCCTRL_DIV, control) + 1); -+ -+ return clk->parent->get_rate(clk->parent) / div; -+} -+ -+static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply) -+{ -+ unsigned long parent_rate; -+ unsigned long actual_rate; -+ unsigned long div; -+ u32 control; -+ -+ parent_rate = clk->parent->get_rate(clk->parent); -+ control = pm_readl(GCCTRL[clk->index]); -+ -+ if (rate > 3 * parent_rate / 4) { -+ actual_rate = parent_rate; -+ control &= ~PM_BIT(GCCTRL_DIVEN); -+ } else { -+ div = (parent_rate + rate) / (2 * rate) - 1; -+ control = PM_BFINS(GCCTRL_DIV, div, control) -+ | PM_BIT(GCCTRL_DIVEN); -+ actual_rate = parent_rate / (2 * (div + 1)); -+ } -+ -+ pr_debug("clk %s: new rate %lu (actual rate %lu)\n", -+ clk->name, rate, actual_rate); -+ -+ if (apply) -+ pm_writel(GCCTRL[clk->index], control); -+ -+ return actual_rate; -+} -+ -+static int genclk_set_parent(struct clk *clk, struct clk *parent) -+{ -+ unsigned int i; -+ u32 control; -+ -+ pr_debug("clk %s: new parent %s (was %s)\n", -+ clk->name, parent->name, -+ clk->parent ? clk->parent->name : "<none>"); -+ -+ control = pm_readl(GCCTRL[clk->index]); -+ -+ for (i = 0; i < ARRAY_SIZE(genclk_parent); i++) { -+ if (parent == genclk_parent[i]) { -+ control = PM_BFINS(GCCTRL_OSCSEL, i, control); -+ break; -+ } -+ } -+ -+ if (i >= ARRAY_SIZE(genclk_parent)) -+ return -EINVAL; -+ -+ pm_writel(GCCTRL[clk->index], control); -+ clk->parent = parent; -+ -+ return 0; -+} -+ -+#define DEFINE_GCLK(_name, i) \ -+ static struct clk _name = { \ -+ .name = #_name, \ -+ .mode = genclk_mode, \ -+ .get_rate = genclk_get_rate, \ -+ .set_rate = genclk_set_rate, \ -+ .set_parent = genclk_set_parent, \ -+ .index = i, \ -+ } -+ -+DEFINE_GCLK(gclk0, 0); -+DEFINE_GCLK(gclk1, 1); -+DEFINE_GCLK(gclk2, 2); -+DEFINE_GCLK(gclk3, 3); -+DEFINE_GCLK(gclk4, 4); -+DEFINE_GCLK(gclk5, 5); -+ -+static void __init genclk_init_parent(struct clk *clk) -+{ -+ unsigned int parent; -+ u32 control; -+ -+ BUG_ON(clk->index > NR_GENERIC_CLOCKS); -+ -+ control = pm_readl(GCCTRL[clk->index]); -+ parent = PM_BFEXT(GCCTRL_OSCSEL, control); -+ if (parent >= ARRAY_SIZE(genclk_parent)) { -+ /* Current parent is invalid. Reset to a sane value */ -+ parent = 0; -+ control = PM_BF(GCCTRL_OSCSEL, parent); -+ } -+ -+ clk->parent = genclk_parent[parent]; -+} -+ -+ -+/* -------------------------------------------------------------------- -+ * System peripherals -+ * -------------------------------------------------------------------- */ -+static struct dw_dma_platform_data dw_dmac0_data = { -+ .nr_channels = 4, -+}; -+static struct pdca_pdata pdca_data = { -+ .nr_channels = 20, -+}; -+ -+static struct resource intc_resource[] = { -+ PBMEM(0xffd00000), -+}; -+static struct resource pm_resource[] = { -+ PBMEM(0xffd00400), -+ IRQ(10), -+}; -+static struct resource sdc_resource[] = { -+ PBMEM(0xffd00800), -+ IRQ(45), -+}; -+static struct resource ast0_resource[] = { -+ PBMEM(0xffd00c00), -+ IRQ(11), -+}; -+static struct resource ast1_resource[] = { -+ PBMEM(0xffd01000), -+ IRQ(12), -+}; -+static struct resource wdt_resource[] = { -+ PBMEM(0xffd01400), -+}; -+static struct resource gpio_resource[] = { -+ PBMEM(0xffd02000), -+ { -+ .start = 16, -+ .end = 19, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+static struct resource pdca_resource[] = { -+ { -+ .start = 0xffe00000, -+ .end = 0xffe01fff, -+ .flags = IORESOURCE_MEM, -+ }, -+ IRQ(1), -+}; -+static struct resource smc_resource[] = { -+ PBMEM(0xffe04400), -+}; -+static struct resource dw_dmac0_resource[] = { -+ { -+ .start = 0xff100000, -+ .end = 0xff1003ff, -+ .flags = IORESOURCE_MEM, -+ }, -+ IRQ(5), -+}; -+ -+struct platform_device at32_intc0_device = { -+ .name = "intc", -+ .resource = intc_resource, -+ .num_resources = ARRAY_SIZE(intc_resource), -+}; -+static struct platform_device pm_device = { -+ .name = "pm", -+ .resource = pm_resource, -+ .num_resources = ARRAY_SIZE(pm_resource), -+}; -+static struct platform_device sdc_device = { -+ .name = "sdc", -+ .resource = sdc_resource, -+ .num_resources = ARRAY_SIZE(sdc_resource), -+}; -+static struct platform_device ast0_device = { -+ .name = "rtc-ast", -+ .id = 0, -+ .resource = ast0_resource, -+ .num_resources = ARRAY_SIZE(ast0_resource), -+}; -+static struct platform_device ast1_device = { -+ .name = "timer-ast", -+ .id = 1, -+ .resource = ast1_resource, -+ .num_resources = ARRAY_SIZE(ast1_resource), -+}; -+static struct platform_device wdt_device = { -+ .name = "at32_wdt", -+ .id = 0, -+ .resource = wdt_resource, -+ .num_resources = ARRAY_SIZE(wdt_resource), -+}; -+static struct platform_device gpio_device = { -+ .name = "gpio", -+ .id = 0, -+ .resource = gpio_resource, -+ .num_resources = ARRAY_SIZE(gpio_resource), -+}; -+static struct platform_device pdca_device = { -+ .dev.platform_data = &pdca_data, -+ .name = "atmel_pdca", -+ .id = 0, -+ .resource = pdca_resource, -+ .num_resources = ARRAY_SIZE(pdca_resource), -+}; -+static struct platform_device smc_device = { -+ .name = "smc", -+ .id = 0, -+ .resource = smc_resource, -+ .num_resources = ARRAY_SIZE(smc_resource), -+}; -+static struct platform_device dw_dmac0_device = { -+ .dev.platform_data = &dw_dmac0_data, -+ .name = "dw_dmac", -+ .id = 0, -+ .resource = dw_dmac0_resource, -+ .num_resources = ARRAY_SIZE(dw_dmac0_resource), -+}; -+ -+DEV_CLK(pclk, at32_intc0, pba, 0); -+DEV_CLK(pclk, pm, pba, 1); -+DEV_CLK(pclk, sdc, pba, 2); -+DEV_CLK(pclk, ast0, pba, 3); -+DEV_CLK(pclk, ast1, pba, 4); -+DEV_CLK(pclk, wdt, pba, 5); -+DEV_CLK(pclk, gpio, pba, 8); -+DEV_CLK(hclk, pdca, hsb, 9); -+DEV_CLK(pclk, pdca, pbb, 0); -+DEV_CLK(pclk, smc, pbb, 5); -+DEV_CLK(hclk, dw_dmac0, hsb, 10); -+ -+static struct clk ebi_hclk = { -+ .name = "ebi_hclk", -+ .parent = &hsb_clk, -+ .mode = hsb_clk_mode, -+ .get_rate = hsb_clk_get_rate, -+ .users = 1, -+}; -+static struct clk hramc_clk = { -+ .name = "hramc", -+ .parent = &hsb_clk, -+ .mode = hsb_clk_mode, -+ .get_rate = hsb_clk_get_rate, -+ .users = 1, -+ .index = 4, -+}; -+static struct clk sdramc_clk = { -+ .name = "sdramc_clk", -+ .parent = &pbb_clk, -+ .mode = pbb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .users = 1, -+ .index = 6, -+}; -+ -+static int __init system_device_init(void) -+{ -+ platform_device_register(&at32_intc0_device); -+ platform_device_register(&pm_device); -+ platform_device_register(&sdc_device); -+ platform_device_register(&ast0_device); -+ platform_device_register(&ast1_device); -+ platform_device_register(&wdt_device); -+ platform_device_register(&gpio_device); -+ platform_device_register(&pdca_device); -+ platform_device_register(&smc_device); -+ platform_device_register(&dw_dmac0_device); -+ -+ return 0; -+} -+core_initcall(system_device_init); -+ -+/* -------------------------------------------------------------------- -+ * HMATRIX -+ * -------------------------------------------------------------------- */ -+ -+struct clk at32_hmatrix_clk = { -+ .name = "hmatrix_clk", -+ .parent = &pbb_clk, -+ .mode = pbb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .index = 8, -+ .users = 0, -+}; -+ -+/* -------------------------------------------------------------------- -+ * USART -+ * -------------------------------------------------------------------- */ -+ -+static struct atmel_uart_data atmel_usart0_data = { -+ .use_dma_tx = 0, -+ .use_dma_rx = 0, -+}; -+static struct resource atmel_usart0_resource[] = { -+ PBMEM(0xffd03000), -+ IRQ(24), -+}; -+static struct platform_device atmel_usart0_device = { -+ .name = "atmel_usart", -+ .id = 0, -+ .dev = { -+ .platform_data = &atmel_usart0_data, -+ }, -+ .resource = atmel_usart0_resource, -+ .num_resources = ARRAY_SIZE(atmel_usart0_resource), -+}; -+DEV_CLK(usart, atmel_usart0, pba, 9); -+ -+static struct atmel_uart_data atmel_usart1_data = { -+ .use_dma_tx = 0, -+ .use_dma_rx = 0, -+}; -+static struct resource atmel_usart1_resource[] = { -+ PBMEM(0xffd03400), -+ IRQ(25), -+}; -+static struct platform_device atmel_usart1_device = { -+ .name = "atmel_usart", -+ .id = 1, -+ .dev = { -+ .platform_data = &atmel_usart1_data, -+ }, -+ .resource = atmel_usart1_resource, -+ .num_resources = ARRAY_SIZE(atmel_usart1_resource), -+}; -+DEV_CLK(usart, atmel_usart1, pba, 10); -+ -+static struct atmel_uart_data atmel_usart2_data = { -+ .use_dma_tx = 0, -+ .use_dma_rx = 0, -+}; -+static struct resource atmel_usart2_resource[] = { -+ PBMEM(0xffd03800), -+ IRQ(26), -+}; -+static struct platform_device atmel_usart2_device = { -+ .name = "atmel_usart", -+ .id = 2, -+ .dev = { -+ .platform_data = &atmel_usart2_data, -+ }, -+ .resource = atmel_usart2_resource, -+ .num_resources = ARRAY_SIZE(atmel_usart2_resource), -+}; -+DEV_CLK(usart, atmel_usart2, pba, 11); -+ -+static struct atmel_uart_data atmel_usart3_data = { -+ .use_dma_tx = 0, -+ .use_dma_rx = 0, -+}; -+static struct resource atmel_usart3_resource[] = { -+ PBMEM(0xffd03c00), -+ IRQ(27), -+}; -+static struct platform_device atmel_usart3_device = { -+ .name = "atmel_usart", -+ .id = 3, -+ .dev = { -+ .platform_data = &atmel_usart3_data, -+ }, -+ .resource = atmel_usart3_resource, -+ .num_resources = ARRAY_SIZE(atmel_usart3_resource), -+}; -+DEV_CLK(usart, atmel_usart3, pba, 12); -+ -+static struct atmel_uart_data atmel_usart4_data = { -+ .use_dma_tx = 0, -+ .use_dma_rx = 0, -+}; -+static struct resource atmel_usart4_resource[] = { -+ PBMEM(0xffd04000), -+ IRQ(28), -+}; -+static struct platform_device atmel_usart4_device = { -+ .name = "atmel_usart", -+ .id = 4, -+ .dev = { -+ .platform_data = &atmel_usart4_data, -+ }, -+ .resource = atmel_usart4_resource, -+ .num_resources = ARRAY_SIZE(atmel_usart4_resource), -+}; -+DEV_CLK(usart, atmel_usart4, pba, 13); -+ -+static struct atmel_uart_data atmel_usart5_data = { -+ .use_dma_tx = 0, -+ .use_dma_rx = 0, -+}; -+static struct resource atmel_usart5_resource[] = { -+ PBMEM(0xffd04400), -+ IRQ(29), -+}; -+static struct platform_device atmel_usart5_device = { -+ .name = "atmel_usart", -+ .id = 5, -+ .dev = { -+ .platform_data = &atmel_usart5_data, -+ }, -+ .resource = atmel_usart5_resource, -+ .num_resources = ARRAY_SIZE(atmel_usart5_resource), -+}; -+DEV_CLK(usart, atmel_usart5, pba, 14); -+ -+static void __init configure_usart0_pins(void) -+{ -+ /* RXD | TXD */ -+ select_peripheral(PB, (1 << 14) | (1 << 15), PERIPH_B, 0); -+} -+ -+static void __init configure_usart1_pins(void) -+{ -+ /* TXD | RXD */ -+ select_peripheral(PA, (1 << 8) | (1 << 9), PERIPH_A, 0); -+} -+ -+static void __init configure_usart2_pins(void) -+{ -+ /* TXD | RXD */ -+ select_peripheral(PA, (1 << 16) | (1 << 17), PERIPH_A, 0); -+} -+ -+static void __init configure_usart3_pins(void) -+{ -+ /* RXD | TXD */ -+ select_peripheral(PC, (1 << 10) | (1 << 11), PERIPH_A, 0); -+} -+ -+static void __init configure_usart4_pins(void) -+{ -+ /* TXD | RXD */ -+ select_peripheral(PA, (1 << 14) | (1 << 15), PERIPH_A, 0); -+} -+ -+static void __init configure_usart5_pins(void) -+{ -+ /* RXD | TXD */ -+ select_peripheral(PA, (1 << 22) | (1 << 23), PERIPH_A, 0); -+} -+ -+static struct platform_device *__initdata at32_usarts[6]; -+ -+void __init at32_map_usart(unsigned int hw_id, unsigned int line) -+{ -+ struct platform_device *pdev; -+ -+ switch (hw_id) { -+ case 0: -+ pdev = &atmel_usart0_device; -+ configure_usart0_pins(); -+ break; -+ case 1: -+ pdev = &atmel_usart1_device; -+ configure_usart1_pins(); -+ break; -+ case 2: -+ pdev = &atmel_usart2_device; -+ configure_usart2_pins(); -+ break; -+ case 3: -+ pdev = &atmel_usart3_device; -+ configure_usart3_pins(); -+ break; -+ case 4: -+ pdev = &atmel_usart4_device; -+ configure_usart4_pins(); -+ break; -+ case 5: -+ pdev = &atmel_usart5_device; -+ configure_usart5_pins(); -+ break; -+ default: -+ return; -+ } -+ -+ if (PXSEG(pdev->resource[0].start) == P4SEG) { -+ /* Addresses in the P4 segment are permanently mapped 1:1 */ -+ struct atmel_uart_data *data = pdev->dev.platform_data; -+ data->regs = (void __iomem __force *)pdev->resource[0].start; -+ } -+ -+ pdev->id = line; -+ at32_usarts[line] = pdev; -+} -+ -+struct platform_device *__init at32_add_device_usart(unsigned int id) -+{ -+ platform_device_register(at32_usarts[id]); -+ return at32_usarts[id]; -+} -+ -+struct platform_device *atmel_default_console_device; -+ -+void __init at32_setup_serial_console(unsigned int usart_id) -+{ -+ atmel_default_console_device = at32_usarts[usart_id]; -+} -+ -+/* -------------------------------------------------------------------- -+ * Ethernet -+ * -------------------------------------------------------------------- */ -+ -+static u64 macb0_dma_mask = DMA_32BIT_MASK; -+static struct resource macb0_resource[] __initdata = { -+ PBMEM(0xffe04000), -+ IRQ(8), -+}; -+static struct clk macb0_hclk = { -+ .name = "hclk", -+ .parent = &hsb_clk, -+ .mode = hsb_clk_mode, -+ .get_rate = hsb_clk_get_rate, -+ .index = 8, -+}; -+static struct clk macb0_pclk = { -+ .name = "pclk", -+ .parent = &pbb_clk, -+ .mode = pbb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .index = 4, -+}; -+ -+struct platform_device *__init -+at32_add_device_eth(unsigned int id, struct eth_platform_data *data) -+{ -+ struct platform_device *pdev; -+ u32 pin_mask_a; -+ u32 pin_mask_c; -+ -+ if (id != 0 || !data) -+ return NULL; -+ -+ pdev = platform_device_alloc("macb", id); -+ if (!pdev) -+ return NULL; -+ -+ if (platform_device_add_resources(pdev, macb0_resource, -+ ARRAY_SIZE(macb0_resource))) -+ goto out_free_pdev; -+ -+ if (platform_device_add_data(pdev, data, -+ sizeof(struct eth_platform_data))) -+ goto out_free_pdev; -+ -+ pin_mask_a = (1 << 4); /* RXDV */ -+ pin_mask_c = (1 << 10); /* MDC */ -+ pin_mask_c |= (1 << 11); /* MDIO */ -+ pin_mask_c |= (1 << 12); /* TXCK */ -+ pin_mask_c |= (1 << 14); /* RXD0 */ -+ pin_mask_c |= (1 << 15); /* RXD1 */ -+ pin_mask_c |= (1 << 16); /* RXER */ -+ pin_mask_c |= (1 << 18); /* TXEN */ -+ pin_mask_c |= (1 << 19); /* TXD0 */ -+ pin_mask_c |= (1 << 20); /* TXD1 */ -+ -+ if (!data->is_rmii) { -+ pin_mask_a |= (1<<0); /* COL */ -+ pin_mask_a |= (1<<1); /* RXD2 */ -+ pin_mask_a |= (1<<2); /* RXD3 */ -+ pin_mask_a |= (1<<3); /* RXCK */ -+ pin_mask_a |= (1<<5); /* TXER */ -+ pin_mask_a |= (1<<6); /* TXD2 */ -+ pin_mask_a |= (1<<7); /* TXD3 */ -+ pin_mask_c |= (1<<13); /* CRS */ -+ pin_mask_c |= (1<<17); /* SPD */ -+ } -+ -+ select_peripheral(PA, pin_mask_a, PERIPH_B, 0); -+ select_peripheral(PC, pin_mask_c, PERIPH_C, 0); -+ -+ pdev->dev.dma_mask = &macb0_dma_mask; -+ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK; -+ -+ macb0_hclk.dev = &pdev->dev; -+ macb0_pclk.dev = &pdev->dev; -+ -+ platform_device_add(pdev); -+ -+ return pdev; -+ -+out_free_pdev: -+ platform_device_put(pdev); -+ return NULL; -+} -+ -+/* -------------------------------------------------------------------- -+ * SPI -+ * -------------------------------------------------------------------- */ -+static struct resource atmel_spi_resource[][2] __initdata = { -+ { -+ PBMEM(0xffe05400), -+ IRQ(36), -+ }, { -+ PBMEM(0xffe05800), -+ IRQ(37), -+ }, { -+ PBMEM(0xffe05c00), -+ IRQ(38), -+ }, { -+ PBMEM(0xffe06000), -+ IRQ(39), -+ } -+}; -+static struct clk atmel_spi_clk[] = { -+ { -+ .name = "spi_clk", -+ .parent = &pbb_clk, -+ .mode = pbb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .index = 9, -+ }, { -+ .name = "spi_clk", -+ .parent = &pbb_clk, -+ .mode = pbb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .index = 10, -+ }, { -+ .name = "spi_clk", -+ .parent = &pbb_clk, -+ .mode = pbb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .index = 11, -+ }, { -+ .name = "spi_clk", -+ .parent = &pbb_clk, -+ .mode = pbb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .index = 12, -+ } -+}; -+static int __initdata atmel_spi_pins[][4] = { -+ { -+ /* SPI0 */ -+ GPIO_PIN_PB(3), GPIO_PIN_PB(4), -+ GPIO_PIN_PB(5), GPIO_PIN_PB(6), -+ }, { -+ /* SPI1 */ -+ GPIO_PIN_PB(4), -1, -1, -1, -+ }, { -+ /* SPI2 */ -+ GPIO_PIN_PA(28), -1, -1, -1, -+ }, { -+ /* SPI3 */ -+ GPIO_PIN_PA(27), GPIO_PIN_PA(20), -+ GPIO_PIN_PA(29), GPIO_PIN_PA(30), -+ } -+}; -+ -+ -+static void __init at32_spi_setup_dw_dma(unsigned int id, -+ struct atmel_spi_pdata *pdata) -+{ -+ struct dw_dma_slave *rx_dws; -+ struct dw_dma_slave *tx_dws; -+ -+ if (pdata->rx_dma_slave) -+ rx_dws = kmemdup(to_dw_dma_slave(pdata->rx_dma_slave), -+ sizeof(struct dw_dma_slave), GFP_KERNEL); -+ else -+ rx_dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL); -+ if (pdata->tx_dma_slave) -+ tx_dws = kmemdup(to_dw_dma_slave(pdata->tx_dma_slave), -+ sizeof(struct dw_dma_slave), GFP_KERNEL); -+ else -+ tx_dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL); -+ -+ rx_dws->slave.dma_dev = tx_dws->slave.dma_dev = &dw_dmac0_device.dev; -+ rx_dws->slave.reg_width = tx_dws->slave.reg_width -+ = DMA_SLAVE_WIDTH_8BIT; -+ -+ rx_dws->cfg_hi = DWC_CFGH_SRC_PER(2); -+ tx_dws->cfg_hi = DWC_CFGH_DST_PER(3); -+ rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL -+ | DWC_CFGL_HS_SRC_POL); -+ tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL -+ | DWC_CFGL_HS_SRC_POL); -+ -+ pdata->rx_dma_slave = &rx_dws->slave; -+ pdata->tx_dma_slave = &tx_dws->slave; -+} -+ -+static void __init at32_spi_setup_pdca(unsigned int id, -+ struct atmel_spi_pdata *pdata) -+{ -+ struct pdca_slave *rx_pslave; -+ struct pdca_slave *tx_pslave; -+ -+ if (pdata->rx_dma_slave) -+ rx_pslave = kmemdup(dma_to_pdca_slave(pdata->rx_dma_slave), -+ sizeof(struct pdca_slave), GFP_KERNEL); -+ else -+ rx_pslave = kzalloc(sizeof(struct pdca_slave), GFP_KERNEL); -+ if (pdata->tx_dma_slave) -+ tx_pslave = kmemdup(dma_to_pdca_slave(pdata->tx_dma_slave), -+ sizeof(struct pdca_slave), GFP_KERNEL); -+ else -+ tx_pslave = kzalloc(sizeof(struct pdca_slave), GFP_KERNEL); -+ -+ rx_pslave->slave.dma_dev = &pdca_device.dev; -+ tx_pslave->slave.dma_dev = &pdca_device.dev; -+ rx_pslave->slave.reg_width = DMA_SLAVE_WIDTH_8BIT; -+ tx_pslave->slave.reg_width = DMA_SLAVE_WIDTH_8BIT; -+ -+ rx_pslave->tx_periph_id = -1; -+ tx_pslave->rx_periph_id = -1; -+ -+ switch (id) { -+ case 1: -+ rx_pslave->rx_periph_id = 6; -+ tx_pslave->tx_periph_id = 17; -+ break; -+ case 2: -+ rx_pslave->rx_periph_id = 7; -+ tx_pslave->tx_periph_id = 18; -+ break; -+ case 3: -+ rx_pslave->rx_periph_id = 8; -+ tx_pslave->tx_periph_id = 19; -+ break; -+ } -+ -+ pdata->rx_dma_slave = &rx_pslave->slave; -+ pdata->tx_dma_slave = &tx_pslave->slave; -+} -+ -+static void __init -+at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b, -+ unsigned int n, const int *pins) -+{ -+ unsigned int mode; -+ unsigned int cs; -+ int pin; -+ -+ for (; n; n--, b++) { -+ b->bus_num = bus_num; -+ cs = b->chip_select; -+ if (cs >= 4 || !gpio_is_valid(pins[cs])) -+ continue; -+ -+ pin = (int)b->controller_data; -+ if (!pin || !gpio_is_valid(pin)) { -+ pin = pins[cs]; -+ b->controller_data = (void *)pin; -+ } -+ -+ mode = AT32_GPIOF_OUTPUT; -+ if (!(b->mode & SPI_CS_HIGH)) -+ mode |= AT32_GPIOF_HIGH; -+ at32_select_gpio(pin, mode); -+ } -+} -+ -+struct platform_device *__init at32_add_device_spi(unsigned int id, -+ struct spi_board_info *b, unsigned int n) -+{ -+ struct atmel_spi_pdata pdata; -+ struct platform_device *pdev; -+ -+ BUILD_BUG_ON(ARRAY_SIZE(atmel_spi_resource) -+ != ARRAY_SIZE(atmel_spi_clk)); -+ -+ if (id >= ARRAY_SIZE(atmel_spi_resource)) -+ return NULL; -+ -+ pdev = platform_device_alloc("atmel_spi", id); -+ if (!pdev) -+ goto fail; -+ -+ if (platform_device_add_resources(pdev, atmel_spi_resource[id], -+ ARRAY_SIZE(atmel_spi_resource[id]))) -+ goto fail; -+ -+ memset(&pdata, 0, sizeof(struct atmel_spi_pdata)); -+ -+ if (id == 0) -+ at32_spi_setup_dw_dma(id, &pdata); -+ else -+ at32_spi_setup_pdca(id, &pdata); -+ pdata.rx_dma_slave->dev = pdata.tx_dma_slave->dev = &pdev->dev; -+ -+ if (platform_device_add_data(pdev, &pdata, -+ sizeof(struct atmel_spi_pdata))) -+ goto fail; -+ -+ switch (id) { -+ case 0: -+ /* pullup MISO so a level is always defined */ -+ select_peripheral(PB, (1 << 1), PERIPH_A, AT32_GPIOF_PULLUP); -+ /* MOSI | SCK */ -+ select_peripheral(PB, (1 << 0) | (1 << 2), PERIPH_A, 0); -+ -+ at32_spi_setup_slaves(0, b, n, atmel_spi_pins[0]); -+ break; -+ -+ case 1: -+ /* pullup MISO so a level is always defined */ -+ select_peripheral(PB, (1 << 7), PERIPH_B, AT32_GPIOF_PULLUP); -+ /* MOSI | SCK */ -+ select_peripheral(PB, (1 << 6) | (1 << 5), PERIPH_B, 0); -+ -+ at32_spi_setup_slaves(1, b, n, atmel_spi_pins[1]); -+ break; -+ -+ case 2: -+ /* pullup MISO so a level is always defined */ -+ select_peripheral(PA, (1 << 30), PERIPH_B, AT32_GPIOF_PULLUP); -+ /* MOSI | SCK */ -+ select_peripheral(PA, (1 << 31) || (1 << 29), PERIPH_B, 0); -+ -+ at32_spi_setup_slaves(2, b, n, atmel_spi_pins[2]); -+ break; -+ -+ case 3: -+ /* pullup MISO so a level is always defined */ -+ select_peripheral(PA, (1 << 25), PERIPH_A, AT32_GPIOF_PULLUP); -+ /* MOSI | SCK */ -+ select_peripheral(PA, (1 << 24) | (1 << 26), PERIPH_A, 0); -+ -+ at32_spi_setup_slaves(3, b, n, atmel_spi_pins[3]); -+ break; -+ -+ default: -+ goto fail; -+ } -+ -+ atmel_spi_clk[id].dev = &pdev->dev; -+ spi_register_board_info(b, n); -+ platform_device_add(pdev); -+ -+ return pdev; -+ -+fail: -+ platform_device_put(pdev); -+ return NULL; -+} -+ -+/* -------------------------------------------------------------------- -+ * MMC -+ * -------------------------------------------------------------------- */ -+static struct resource atmel_mci0_resource[] __initdata = { -+ PBMEM(0xfff00000), -+ IRQ(43), -+}; -+/* MCI is on the PBC bus, but it is controlled by the PBBMASK register */ -+static struct clk atmel_mci0_pclk = { -+ .name = "mci_clk", -+ .parent = &pbc_clk, -+ .mode = pbb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .index = 16, -+}; -+ -+struct platform_device *__init -+at32_add_device_mci(unsigned int id, struct mci_platform_data *data) -+{ -+ struct platform_device *pdev; -+ struct dw_dma_slave *dws; -+ u32 pin_mask_1 = 0; -+ u32 pin_mask_2 = 0; -+ -+ if (id != 0) -+ return NULL; -+ -+ /* Must have at least one usable slot */ -+ if (!data->slot[0].bus_width && !data->slot[1].bus_width) -+ return NULL; -+ -+ pdev = platform_device_alloc("atmel_mci", id); -+ if (!pdev) -+ goto fail; -+ -+ if (platform_device_add_resources(pdev, atmel_mci0_resource, -+ ARRAY_SIZE(atmel_mci0_resource))) -+ goto fail; -+ -+ if (data->dma_slave) -+ dws = kmemdup(to_dw_dma_slave(data->dma_slave), -+ sizeof(struct dw_dma_slave), GFP_KERNEL); -+ else -+ dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL); -+ -+ dws->slave.dev = &pdev->dev; -+ dws->slave.dma_dev = &dw_dmac0_device.dev; -+ dws->slave.reg_width = DMA_SLAVE_WIDTH_32BIT; -+ dws->cfg_hi = (DWC_CFGH_SRC_PER(0) -+ | DWC_CFGH_DST_PER(1)); -+ dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL -+ | DWC_CFGL_HS_SRC_POL); -+ -+ data->dma_slave = &dws->slave; -+ -+ if (platform_device_add_data(pdev, data, -+ sizeof(struct mci_platform_data))) -+ goto fail; -+ -+ switch (data->slot[0].bus_width) { -+ case 8: -+ pin_mask_1 |= (1 << 20); /* DATA4 */ -+ pin_mask_1 |= (1 << 21); /* DATA5 */ -+ pin_mask_1 |= (1 << 22); /* DATA6 */ -+ pin_mask_1 |= (1 << 23); /* DATA7 */ -+ /* fall through */ -+ case 4: -+ pin_mask_2 |= (1 << 19); /* DATA1 */ -+ pin_mask_2 |= (1 << 20); /* DATA2 */ -+ pin_mask_2 |= (1 << 21); /* DATA3 */ -+ /* fall through */ -+ case 1: -+ pin_mask_2 |= (1 << 18); /* DATA0 */ -+ pin_mask_2 |= (1 << 17); /* CMD */ -+ -+ select_peripheral(PA, pin_mask_1, PERIPH_D, AT32_GPIOF_PULLUP); -+ select_peripheral(PB, pin_mask_2, PERIPH_A, AT32_GPIOF_PULLUP); -+ select_peripheral(PB, (1 << 16), PERIPH_A, 0); /* CLK */ -+ -+ if (gpio_is_valid(data->slot[0].detect_pin)) -+ at32_select_gpio(data->slot[0].detect_pin, 0); -+ if (gpio_is_valid(data->slot[0].wp_pin)) -+ at32_select_gpio(data->slot[0].wp_pin, 0); -+ -+ break; -+ case 0: -+ /* Slot is unused */ -+ break; -+ default: -+ goto fail; -+ } -+ -+ pin_mask_1 = 0; -+ -+ switch (data->slot[1].bus_width) { -+ case 8: -+ pin_mask_1 |= (1 << 9); /* DATA7 */ -+ pin_mask_1 |= (1 << 8); /* DATA6 */ -+ pin_mask_1 |= (1 << 7); /* DATA5 */ -+ pin_mask_1 |= (1 << 6); /* DATA4 */ -+ /* fall through */ -+ case 4: -+ pin_mask_1 |= (1 << 5); /* DATA3 */ -+ pin_mask_1 |= (1 << 4); /* DATA2 */ -+ pin_mask_1 |= (1 << 3); /* DATA1 */ -+ /* fall through */ -+ case 1: -+ pin_mask_1 |= (1 << 2); /* DATA0 */ -+ pin_mask_1 |= (1 << 1); /* CMD */ -+ -+ select_peripheral(PC, pin_mask_1, PERIPH_A, AT32_GPIOF_PULLUP); -+ select_peripheral(PC, (1 << 0), PERIPH_A, 0); /* CLK */ -+ -+ if (gpio_is_valid(data->slot[1].detect_pin)) -+ at32_select_gpio(data->slot[1].detect_pin, 0); -+ if (gpio_is_valid(data->slot[1].wp_pin)) -+ at32_select_gpio(data->slot[1].wp_pin, 0); -+ -+ break; -+ case 0: -+ /* Slot is unused */ -+ break; -+ default: -+ goto fail; -+ } -+ -+ atmel_mci0_pclk.dev = &pdev->dev; -+ -+ platform_device_add(pdev); -+ return pdev; -+ -+fail: -+ platform_device_put(pdev); -+ return NULL; -+} -+ -+/* -------------------------------------------------------------------- -+ * LCDC -+ * -------------------------------------------------------------------- */ -+static u64 atmel_lcdfb0_dma_mask = DMA_32BIT_MASK; -+static struct resource atmel_lcdfb0_resource[] __initdata = { -+ { -+ .start = 0xff000000, -+ .end = 0xff000fff, -+ .flags = IORESOURCE_MEM, -+ }, -+ IRQ(3), -+ { -+ /* Placeholder for pre-allocated fb memory */ -+ .start = 0x00000000, -+ .end = 0x00000000, -+ .flags = IORESOURCE_MEM, -+ }, -+}; -+ -+static struct clk atmel_lcdfb0_hck1 = { -+ .name = "hck1", -+ .parent = &hsb_clk, -+ .mode = hsb_clk_mode, -+ .get_rate = hsb_clk_get_rate, -+ .index = 7, -+}; -+static struct clk atmel_lcdfb0_pixclk = { -+ .name = "lcdc_clk", -+ .mode = genclk_mode, -+ .get_rate = genclk_get_rate, -+ .set_rate = genclk_set_rate, -+ .set_parent = genclk_set_parent, -+ .index = 6, -+}; -+ -+struct platform_device *__init -+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, -+ unsigned long fbmem_start, unsigned long fbmem_len, -+ u64 pin_mask) -+{ -+ struct { -+ struct atmel_lcdfb_info info; -+ struct fb_monspecs monspecs; -+ struct fb_videomode modedb[0]; -+ } *all_data; -+ struct platform_device *pdev; -+ unsigned int data_size; -+ unsigned int modedb_size; -+ unsigned int num_resources; -+ int ret; -+ -+ if (id > 0 || !data) -+ return NULL; -+ -+ pdev = platform_device_alloc("atmel_lcdfb", id); -+ if (!pdev) -+ return NULL; -+ -+ num_resources = ARRAY_SIZE(atmel_lcdfb0_resource); -+ if (fbmem_len) { -+ atmel_lcdfb0_resource[num_resources - 1].start = fbmem_start; -+ atmel_lcdfb0_resource[num_resources - 1].end -+ = fbmem_start + fbmem_len - 1; -+ } else { -+ num_resources--; -+ } -+ -+ if (platform_device_add_resources(pdev, atmel_lcdfb0_resource, -+ num_resources)) -+ goto error; -+ -+ /* -+ * Allocate all data -- info struct, monspecs and modedb -- in -+ * a single chunk. -+ */ -+ modedb_size = data->default_monspecs->modedb_len -+ * sizeof(struct fb_videomode); -+ data_size = sizeof(*all_data) + modedb_size; -+ all_data = kmalloc(data_size, GFP_KERNEL); -+ if (!all_data) -+ goto error; -+ -+ memcpy(&all_data->info, data, sizeof(struct atmel_lcdfb_info)); -+ memcpy(&all_data->monspecs, data->default_monspecs, -+ sizeof(struct fb_monspecs)); -+ memcpy(&all_data->modedb, data->default_monspecs->modedb, modedb_size); -+ -+ ret = platform_device_add_data(pdev, all_data, data_size); -+ kfree(all_data); -+ if (ret) -+ goto error; -+ -+ /* -+ * Update internal pointers to use memory allocated by -+ * platform_device_add_data(). -+ */ -+ all_data = pdev->dev.platform_data; -+ all_data->info.default_monspecs = &all_data->monspecs; -+ all_data->monspecs.modedb = all_data->modedb; -+ -+ select_peripheral(PD, 0x7fffffff, PERIPH_A, 0); -+ -+ pdev->dev.dma_mask = &atmel_lcdfb0_dma_mask; -+ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK; -+ -+ atmel_lcdfb0_hck1.dev = &pdev->dev; -+ atmel_lcdfb0_pixclk.dev = &pdev->dev; -+ -+ clk_set_parent(&atmel_lcdfb0_pixclk, &pll0); -+ clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0)); -+ -+ platform_device_add(pdev); -+ return pdev; -+ -+error: -+ platform_device_put(pdev); -+ return NULL; -+} -+ -+/* -------------------------------------------------------------------- -+ * Media Post-Processor (MPOP) -+ * -------------------------------------------------------------------- */ -+ -+static u64 atmel_mpopfb0_dma_mask = DMA_32BIT_MASK; -+static struct resource atmel_mpopfb0_resource[] = { -+ { -+ /* Configuration interface */ -+ .start = 0xffe02000, -+ .end = 0xffe02fff, -+ .flags = IORESOURCE_MEM, -+ }, { -+ /* Data interface (output) */ -+ .start = 0xf0000000, -+ .end = 0xf0ffffff, -+ .flags = IORESOURCE_MEM, -+ }, -+ IRQ(4), -+ { -+ /* Placeholder for pre-allocated fb memory */ -+ .start = 0x00000000, -+ .end = 0x00000000, -+ .flags = IORESOURCE_MEM, -+ }, -+}; -+ -+static struct clk atmel_mpopfb0_hclk = { -+ .name = "hclk", -+ .parent = &hsb_clk, -+ .mode = hsb_clk_mode, -+ .get_rate = hsb_clk_get_rate, -+ .index = 12, -+}; -+static struct clk atmel_mpopfb0_pclk = { -+ .name = "pclk", -+ .parent = &pbb_clk, -+ .mode = pbb_clk_mode, -+ .get_rate = pbb_clk_get_rate, -+ .index = 2, -+}; -+ -+struct platform_device *__init at32_add_device_mpop(unsigned int id, -+ struct platform_device *lcdc_pdev, -+ unsigned long fbmem_start, unsigned long fbmem_len) -+{ -+ struct platform_device *pdev; -+ struct atmel_mpopfb_info info; -+ unsigned int num_resources; -+ -+ if (id != 0) -+ return NULL; -+ -+ pdev = platform_device_alloc("atmel_mpopfb", id); -+ if (!pdev) -+ return NULL; -+ -+ num_resources = ARRAY_SIZE(atmel_mpopfb0_resource); -+ if (fbmem_len) { -+ atmel_mpopfb0_resource[num_resources - 1].start = fbmem_start; -+ atmel_mpopfb0_resource[num_resources - 1].end -+ = fbmem_start + fbmem_len - 1; -+ } else { -+ num_resources--; -+ } -+ if (platform_device_add_resources(pdev, atmel_mpopfb0_resource, -+ num_resources)) -+ goto error; -+ -+ info.lcdc_pdev = lcdc_pdev; -+ if (platform_device_add_data(pdev, &info, sizeof(info))) -+ goto error; -+ -+ pdev->dev.dma_mask = &atmel_mpopfb0_dma_mask; -+ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK; -+ -+ atmel_mpopfb0_hclk.dev = &pdev->dev; -+ atmel_mpopfb0_pclk.dev = &pdev->dev; -+ -+ platform_device_add(pdev); -+ return pdev; -+ -+error: -+ platform_device_put(pdev); -+ return NULL; -+} -+ -+/* ------------------------------------------------------------------- -+ * USB Host (OHCI/EHCI) -+ * ------------------------------------------------------------------- */ -+ -+static u64 usbh_dma_mask = DMA_32BIT_MASK; -+ -+static unsigned long parent_clk_get_rate(struct clk *clk) -+{ -+ return clk->parent->get_rate(clk->parent); -+} -+ -+static void parent_clk_mode(struct clk *clk, int enabled) -+{ -+ /* Parent clk enabled by clk core */ -+} -+ -+/* -+ * The UTMI clock is an internally controlled PLL. It is hardwired to -+ * OSC2 and will run at 30 MHz or 60 MHz depending on the internal -+ * UTMI <-> host controller data bus width. -+ * -+ * We can turn it on and off through the Power Manager. That's all. -+ */ -+static void utmi_clk_mode(struct clk *clk, int enabled) -+{ -+ u32 ppcr = pm_readl(PPCR); -+ -+ if (enabled) -+ /* Clear UTMI suspend signal */ -+ ppcr |= PM_BIT(PPCR_UTMI_CTRL); -+ else -+ /* Set UTMI suspend signal */ -+ ppcr &= ~PM_BIT(PPCR_UTMI_CTRL); -+ -+ pm_writel(PPCR, ppcr | PM_BF(PPCR_KEY, 0x55)); -+ pm_writel(PPCR, ppcr | PM_BF(PPCR_KEY, 0xaa)); -+ -+ if (enabled) -+ /* PLL startup time is 2.5 ms */ -+ udelay(2500); -+} -+ -+static unsigned long utmi_clk_get_rate(struct clk *clk) -+{ -+ /* -+ * Not sure about this, but I think the UTMI interface on -+ * AP7200 is 16 bits wide, which means 30 MHz PHY clock. -+ */ -+ return 30000000; -+} -+ -+static struct clk usbh_utmi_clk = { -+ .name = "usbh_utmi_clk", -+ .parent = &osc2, -+ .mode = utmi_clk_mode, -+ .get_rate = utmi_clk_get_rate, -+}; -+ -+static struct clk usbh_hclk = { -+ .name = "usbh_hclk", -+ .parent = &hsb_clk, -+ .mode = hsb_clk_mode, -+ .get_rate = hsb_clk_get_rate, -+ .index = 6, -+}; -+ -+/* -+ * UTMI and HSB clocks are shared between OHCI and EHCI. These wrappers -+ * make sure both can use the clocks as if they had their own. -+ */ -+static struct clk ohci_utmi_clk = { -+ .name = "utmi_clk", -+ .parent = &usbh_utmi_clk, -+ .mode = parent_clk_mode, -+ .get_rate = parent_clk_get_rate, -+}; -+static struct clk ohci_hclk = { -+ .name = "hclk", -+ .parent = &usbh_hclk, -+ .mode = parent_clk_mode, -+ .get_rate = parent_clk_get_rate, -+}; -+ -+static struct clk ehci_utmi_clk = { -+ .name = "utmi_clk", -+ .parent = &usbh_utmi_clk, -+ .mode = parent_clk_mode, -+ .get_rate = parent_clk_get_rate, -+}; -+static struct clk ehci_hclk = { -+ .name = "hclk", -+ .parent = &usbh_hclk, -+ .mode = parent_clk_mode, -+ .get_rate = parent_clk_get_rate, -+}; -+ -+/* -+ * The USBH needs both a 48 MHz and a 12 MHz clock, and the 12 MHz -+ * must be generated by dividing the 48 MHz clock. There's only one -+ * generic clock hooked up to the USBH which we must use to generate -+ * both. -+ * -+ * This can be done because GCLK0 generates an additional "divided -+ * clock", which is the normal clock output further divided by four -+ * (this is hardcoded, but not surprisingly, exactly what we need.) -+ * -+ * So we generate the clocks as follows: -+ * OSC2 (12 MHz) -> PLL2 (48 MHz) --> GCLK0 undivided (48 MHz) -+ * |-> GCLK0 divided (12 MHz) -+ * -+ * This clock is only used by the OHCI part of the controller, not the -+ * EHCI part. -+ */ -+static struct clk ohci_gclk = { -+ .name = "ohci_clk", -+ .parent = &gclk0, -+ .mode = parent_clk_mode, -+ .get_rate = parent_clk_get_rate, -+}; -+ -+static struct resource usbh_ohci_resource[] __initdata = { -+ { -+ .start = 0xff400000, -+ .end = 0xff400400, -+ .flags = IORESOURCE_MEM, -+ }, -+ IRQ(7), -+}; -+ -+static struct resource usbh_ehci_resource[] __initdata = { -+ { -+ .start = 0xff300000, -+ .end = 0xff300400, -+ .flags = IORESOURCE_MEM, -+ }, -+ IRQ(7), -+}; -+ -+static void __init usbh_setup_pins(void) -+{ -+ static bool already_done __initdata; -+ -+ if (!already_done) { -+ already_done = true; -+ /* OC_EN_N | OC_FLAG_N */ -+ select_peripheral(PA, (1 << 18) | (1 << 19), PERIPH_D, 0); -+ } -+} -+ -+struct platform_device *__init at32_add_device_ohci(unsigned int id) -+{ -+ struct platform_device *pdev; -+ -+ if (id != 0) -+ return NULL; -+ -+ pdev = platform_device_alloc("ohci", id); -+ if (!pdev) -+ goto error; -+ -+ if (platform_device_add_resources(pdev, usbh_ohci_resource, -+ ARRAY_SIZE(usbh_ohci_resource))) -+ goto error; -+ -+ pdev->dev.dma_mask = &usbh_dma_mask; -+ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK; -+ -+ clk_set_parent(&pll2, &osc2); -+ if (clk_round_rate(&pll2, 48000000) != 48000000) { -+ pr_debug("USBH OHCI: Cannot generate 48 MHz clock\n"); -+ goto error; -+ } -+ clk_set_rate(&pll2, 48000000); -+ -+ clk_set_parent(&gclk0, &pll2); -+ clk_set_rate(&gclk0, 48000000); -+ -+ ohci_utmi_clk.dev = &pdev->dev; -+ ohci_hclk.dev = &pdev->dev; -+ ohci_gclk.dev = &pdev->dev; -+ -+ usbh_setup_pins(); -+ -+ platform_device_add(pdev); -+ return pdev; -+ -+error: -+ platform_device_put(pdev); -+ return NULL; -+} -+ -+struct platform_device *__init at32_add_device_ehci(unsigned int id) -+{ -+ struct platform_device *pdev; -+ -+ if (id != 0) -+ return NULL; -+ -+ pdev = platform_device_alloc("ehci", id); -+ if (!pdev) -+ goto error; -+ -+ if (platform_device_add_resources(pdev, usbh_ehci_resource, -+ ARRAY_SIZE(usbh_ehci_resource))) -+ goto error; -+ -+ pdev->dev.dma_mask = &usbh_dma_mask; -+ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK; -+ -+ ehci_utmi_clk.dev = &pdev->dev; -+ ehci_hclk.dev = &pdev->dev; -+ -+ usbh_setup_pins(); -+ -+ platform_device_add(pdev); -+ return pdev; -+ -+error: -+ platform_device_put(pdev); -+ return NULL; -+} -+ -+/* ------------------------------------------------------------------- -+ * NAND Flash / SmartMedia -+ * ------------------------------------------------------------------- */ -+static struct resource smc_cs3_resource[] __initdata = { -+ { -+ .start = 0x24000000, -+ .end = 0x27ffffff, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = 0xffe04c00, -+ .end = 0xffe04fff, -+ .flags = IORESOURCE_MEM, -+ }, -+}; -+ -+struct platform_device *__init -+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data) -+{ -+ struct platform_device *pdev; -+ -+ if (id != 0 || !data) -+ return NULL; -+ -+ pdev = platform_device_alloc("atmel_nand", id); -+ if (!pdev) -+ goto error; -+ -+ if (platform_device_add_resources(pdev, smc_cs3_resource, -+ ARRAY_SIZE(smc_cs3_resource))) -+ goto error; -+ -+ if (platform_device_add_data(pdev, data, -+ sizeof(struct atmel_nand_data))) -+ goto error; -+ -+ hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_NAND_ENABLE); -+ -+ /* NANDOE | NANDWE */ -+ select_peripheral(PF, (1 << 0) | (1 << 1), PERIPH_A, 0); -+ -+ if (gpio_is_valid(data->enable_pin)) -+ at32_select_gpio(data->enable_pin, -+ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); -+ if (gpio_is_valid(data->det_pin)) -+ at32_select_gpio(data->det_pin, 0); -+ if (gpio_is_valid(data->rdy_pin)) -+ at32_select_gpio(data->rdy_pin, 0); -+ -+ platform_device_add(pdev); -+ return pdev; -+ -+error: -+ platform_device_put(pdev); -+ return NULL; -+} -+ -+/* ------------------------------------------------------------------- -+ * Clock list -+ * ------------------------------------------------------------------- */ -+static __initdata struct clk *init_clocks[] = { -+ &rcosc, -+ &osc0, -+ &osc1, -+ &osc2, -+ &osc32, -+ &pll0, -+ &pll1, -+ &pll2, -+ &cpu_clk, -+ &hsb_clk, -+ &pba_clk, -+ &pbb_clk, -+ &pbc_clk, -+ &gclk0, -+ &gclk1, -+ &gclk2, -+ &gclk3, -+ &gclk4, -+ &gclk5, -+ &at32_intc0_pclk, -+ &pm_pclk, -+ &sdc_pclk, -+ &ast0_pclk, -+ &ast1_pclk, -+ &wdt_pclk, -+ &gpio_pclk, -+ &pdca_hclk, -+ &pdca_pclk, -+ &ebi_hclk, -+ &hramc_clk, -+ &smc_pclk, -+ &sdramc_clk, -+ &dw_dmac0_hclk, -+ &atmel_usart0_usart, -+ &atmel_usart1_usart, -+ &atmel_usart2_usart, -+ &atmel_usart3_usart, -+ &atmel_usart4_usart, -+ &atmel_usart5_usart, -+ &atmel_spi_clk[0], -+ &atmel_spi_clk[1], -+ &atmel_spi_clk[2], -+ &atmel_spi_clk[3], -+ &macb0_hclk, -+ &macb0_pclk, -+ &atmel_mci0_pclk, -+ &atmel_lcdfb0_hck1, -+ &atmel_lcdfb0_pixclk, -+ &atmel_mpopfb0_hclk, -+ &atmel_mpopfb0_pclk, -+ &usbh_utmi_clk, -+ &usbh_hclk, -+ &ohci_utmi_clk, -+ &ohci_hclk, -+ &ohci_gclk, -+ &ehci_utmi_clk, -+ &ehci_hclk, -+}; -+ -+static void pll_init_parent(struct clk *pll) -+{ -+ u32 ctrl; -+ -+ ctrl = pm_readl(PLL[pll->index]); -+ switch (PM_BFEXT(PLLx_PLLOSC, ctrl)) { -+ case 0: -+ pll->parent = &osc0; -+ break; -+ case 1: -+ pll->parent = &osc1; -+ break; -+ case 2: -+ pll->parent = &osc2; -+ break; -+ } -+} -+ -+static void ap7200_power_off(void) -+{ -+ /* -+ * Clear all wakeup events so that we don't wake up -+ * immediately after we shut down. -+ */ -+ sdc_writel(ECR, ~0UL); -+ sdc_readl(STATUS); -+ asm volatile("sleep %0; sub pc, -2" -+ :: "i"(CPU_SLEEP_SHUTDOWN) -+ : "memory"); -+} -+ -+void __init setup_platform(void) -+{ -+ unsigned int i; -+ u32 cpu_mask; -+ u32 hsb_mask; -+ u32 pba_mask; -+ u32 pbb_mask; -+ -+ switch (PM_BFEXT(MCCTRL_MCSEL, pm_readl(MCCTRL))) { -+ case 0: -+ main_clock = &rcosc; -+ break; -+ case 1: -+ main_clock = &osc0; -+ break; -+ case 2: -+ main_clock = &pll0; -+ break; -+ } -+ -+ cpu_clk.parent = main_clock; -+ -+ pll_init_parent(&pll0); -+ pll_init_parent(&pll1); -+ pll_init_parent(&pll2); -+ -+ genclk_init_parent(&gclk0); -+ genclk_init_parent(&gclk1); -+ genclk_init_parent(&gclk2); -+ genclk_init_parent(&gclk3); -+ genclk_init_parent(&gclk4); -+ genclk_init_parent(&gclk5); -+ genclk_init_parent(&atmel_lcdfb0_pixclk); -+ -+ /* -+ * Turn on all clocks that have at least one user already, and -+ * turn off everything else. We only do this for module -+ * clocks, and even though it isn't particularly pretty to -+ * check the address of the mode function, it should do the -+ * trick... -+ */ -+ cpu_mask = 0x10003; -+ hsb_mask = pba_mask = pbb_mask = 0; -+ -+ /* Make sure we don't disable the power manager or the SDRAM */ -+ pm_pclk.users = 1; -+ pm_pclk.parent->users = 1; -+ ebi_hclk.users = 1; -+ -+ /* Can't recursively call clk_enable() from any of the clk ops */ -+ sdc_pclk.users = 1; -+ -+ for (i = 0; i < ARRAY_SIZE(init_clocks); i++) { -+ struct clk *clk = init_clocks[i]; -+ -+ /* first, register clock */ -+ at32_clk_register(clk); -+ -+ if (clk->users == 0) -+ continue; -+ -+ if (clk->mode == &cpu_clk_mode) -+ cpu_mask |= 1 << clk->index; -+ else if (clk->mode == &hsb_clk_mode) -+ hsb_mask |= 1 << clk->index; -+ else if (clk->mode == &pba_clk_mode) -+ pba_mask |= 1 << clk->index; -+ else if (clk->mode == &pbb_clk_mode) -+ pbb_mask |= 1 << clk->index; -+ } -+ -+ pm_writel(CPUMASK, cpu_mask); -+ pm_writel(HSBMASK, hsb_mask); -+ pm_writel(PBAMASK, pba_mask); -+ pm_writel(PBBMASK, pbb_mask); -+ -+ at32_gpio_init(&gpio_device); -+ -+ /* Enter shutdown mode when powering off. This happens very -+ * early, so board code may still override this. */ -+ pm_power_off = ap7200_power_off; -+ -+ /* Enable WAKE pin */ -+ sdc_writel(CTRL, SDC_BIT(CTRL_PIN_EN) | SDC_BIT(CTRL_AST_EN) -+ | SDC_BIT(CTRL_OCD_EN) | SDC_BIT(CTRL_JTAG_EN) -+ | SDC_BF(CTRL_KEY, 0x55)); -+ sdc_writel(CTRL, SDC_BIT(CTRL_PIN_EN) | SDC_BIT(CTRL_AST_EN) -+ | SDC_BIT(CTRL_OCD_EN) | SDC_BIT(CTRL_JTAG_EN) -+ | SDC_BF(CTRL_KEY, 0xaa)); -+} -+ -+void __init platform_time_init(void) -+{ -+ ast_time_init(&ast1_device, AST_CLOCK_PB); -+} -+ -+unsigned long at32_get_reset_cause(void) -+{ -+ return pm_readl(RCAUSE); -+} -+ -+struct gen_pool *sram_pool; -+ -+static int __init sram_init(void) -+{ -+ struct gen_pool *pool; -+ -+ /* 1KiB granularity */ -+ pool = gen_pool_create(10, -1); -+ if (!pool) -+ goto fail; -+ -+ if (gen_pool_add(pool, 0x08000000, 0x10000, -1)) -+ goto err_pool_add; -+ -+ sram_pool = pool; -+ return 0; -+ -+err_pool_add: -+ gen_pool_destroy(pool); -+fail: -+ pr_err("Failed to create SRAM pool\n"); -+ return -ENOMEM; -+} -+core_initcall(sram_init); -diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c -index 6c27dda..05877d6 100644 ---- a/arch/avr32/mach-at32ap/clock.c -+++ b/arch/avr32/mach-at32ap/clock.c -@@ -15,24 +15,40 @@ - #include <linux/err.h> - #include <linux/device.h> - #include <linux/string.h> -+#include <linux/list.h> - - #include <mach/chip.h> - - #include "clock.h" - -+/* at32 clock list */ -+static LIST_HEAD(at32_clock_list); -+ - static DEFINE_SPINLOCK(clk_lock); -+static DEFINE_SPINLOCK(clk_list_lock); -+ -+void at32_clk_register(struct clk *clk) -+{ -+ spin_lock(&clk_list_lock); -+ /* add the new item to the end of the list */ -+ list_add_tail(&clk->list, &at32_clock_list); -+ spin_unlock(&clk_list_lock); -+} - - struct clk *clk_get(struct device *dev, const char *id) - { -- int i; -+ struct clk *clk; - -- for (i = 0; i < at32_nr_clocks; i++) { -- struct clk *clk = at32_clock_list[i]; -+ spin_lock(&clk_list_lock); - -- if (clk->dev == dev && strcmp(id, clk->name) == 0) -+ list_for_each_entry(clk, &at32_clock_list, list) { -+ if (clk->dev == dev && strcmp(id, clk->name) == 0) { -+ spin_unlock(&clk_list_lock); - return clk; -+ } - } - -+ spin_unlock(&clk_list_lock); - return ERR_PTR(-ENOENT); - } - EXPORT_SYMBOL(clk_get); -@@ -162,7 +178,11 @@ EXPORT_SYMBOL(clk_get_parent); - #include <linux/io.h> - #include <linux/debugfs.h> - #include <linux/seq_file.h> --#include "pm.h" -+#if defined(CONFIG_CPU_AT32AP700X) -+# include "pm-v1.h" -+#elif defined(CONFIG_CPU_AT32AP720X) -+# include "pm-v3.h" -+#endif - - - #define NEST_DELTA 2 -@@ -203,8 +223,8 @@ dump_clock(struct clk *parent, struct clkinf *r) - - /* cost of this scan is small, but not linear... */ - r->nest = nest + NEST_DELTA; -- for (i = 3; i < at32_nr_clocks; i++) { -- clk = at32_clock_list[i]; -+ -+ list_for_each_entry(clk, &at32_clock_list, list) { - if (clk->parent == parent) - dump_clock(clk, r); - } -@@ -215,33 +235,76 @@ static int clk_show(struct seq_file *s, void *unused) - { - struct clkinf r; - int i; -+ struct clk *clk; - - /* show all the power manager registers */ -- seq_printf(s, "MCCTRL = %8x\n", pm_readl(MCCTRL)); -- seq_printf(s, "CKSEL = %8x\n", pm_readl(CKSEL)); -- seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPU_MASK)); -- seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSB_MASK)); -- seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBA_MASK)); -- seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBB_MASK)); -- seq_printf(s, "PLL0 = %8x\n", pm_readl(PLL0)); -- seq_printf(s, "PLL1 = %8x\n", pm_readl(PLL1)); -- seq_printf(s, "IMR = %8x\n", pm_readl(IMR)); -+ seq_printf(s, "MCCTRL = %8x\n", pm_readl(MCCTRL)); -+ seq_printf(s, "CKSEL = %8x\n", pm_readl(CKSEL)); -+#ifdef CONFIG_CPU_AT32AP700X -+ seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPU_MASK)); -+ seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSB_MASK)); -+ seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBA_MASK)); -+ seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBB_MASK)); -+ seq_printf(s, "PLL0 = %8x\n", pm_readl(PLL0)); -+ seq_printf(s, "PLL1 = %8x\n", pm_readl(PLL1)); -+#else -+ seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPUMASK)); -+ seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSBMASK)); -+ seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBAMASK)); -+ seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBBMASK)); -+ seq_printf(s, "PBADIVMASK = %8x\n", pm_readl(PBADIVMASK)); -+ seq_printf(s, "PBBDIVMASK = %8x\n", pm_readl(PBBDIVMASK)); -+ seq_printf(s, "PLL0 = %8x\n", pm_readl(PLL[0])); -+ seq_printf(s, "PLL1 = %8x\n", pm_readl(PLL[1])); -+ seq_printf(s, "PLL2 = %8x\n", pm_readl(PLL[2])); -+ seq_printf(s, "OSCCTRL0 = %8x\n", pm_readl(OSCCTRL[0])); -+ seq_printf(s, "OSCCTRL1 = %8x\n", pm_readl(OSCCTRL[1])); -+ seq_printf(s, "OSCCTRL2 = %8x\n", pm_readl(OSCCTRL[2])); -+ seq_printf(s, "POSCSR = %8x\n", pm_readl(POSCSR)); -+ seq_printf(s, "PPCR = %8x\n", pm_readl(PPCR)); -+#endif -+ seq_printf(s, "IMR = %8x\n", pm_readl(IMR)); - for (i = 0; i < 8; i++) { - if (i == 5) - continue; -- seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL(i))); -+#ifdef CONFIG_CPU_AT32AP700X -+ seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL(i))); -+#else -+ seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL[i])); -+#endif - } - - seq_printf(s, "\n"); - -- /* show clock tree as derived from the three oscillators -- * we "know" are at the head of the list -- */ - r.s = s; - r.nest = 0; -- dump_clock(at32_clock_list[0], &r); -- dump_clock(at32_clock_list[1], &r); -- dump_clock(at32_clock_list[2], &r); -+ /* protected from changes on the list while dumping */ -+ spin_lock(&clk_list_lock); -+ -+ /* show clock tree as derived from the three oscillators */ -+ clk = clk_get(NULL, "osc32k"); -+ dump_clock(clk, &r); -+ clk_put(clk); -+ -+ clk = clk_get(NULL, "osc0"); -+ dump_clock(clk, &r); -+ clk_put(clk); -+ -+ clk = clk_get(NULL, "osc1"); -+ dump_clock(clk, &r); -+ clk_put(clk); -+ -+#ifdef CONFIG_CPU_AT32AP720X -+ clk = clk_get(NULL, "osc2"); -+ dump_clock(clk, &r); -+ clk_put(clk); -+ -+ clk = clk_get(NULL, "rcosc"); -+ dump_clock(clk, &r); -+ clk_put(clk); -+#endif -+ -+ spin_unlock(&clk_list_lock); - - return 0; - } -diff --git a/arch/avr32/mach-at32ap/clock.h b/arch/avr32/mach-at32ap/clock.h -index bb8e1f2..623bf0e 100644 ---- a/arch/avr32/mach-at32ap/clock.h -+++ b/arch/avr32/mach-at32ap/clock.h -@@ -12,8 +12,13 @@ - * published by the Free Software Foundation. - */ - #include <linux/clk.h> -+#include <linux/list.h> -+ -+ -+void at32_clk_register(struct clk *clk); - - struct clk { -+ struct list_head list; /* linking element */ - const char *name; /* Clock name/function */ - struct device *dev; /* Device the clock is used by */ - struct clk *parent; /* Parent clock, if any */ -@@ -25,6 +30,3 @@ struct clk { - u16 users; /* Enabled if non-zero */ - u16 index; /* Sibling index */ - }; -- --extern struct clk *at32_clock_list[]; --extern unsigned int at32_nr_clocks; -diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/arch/avr32/mach-at32ap/cpufreq.c -index 5dd8d25..4cabc76 100644 ---- a/arch/avr32/mach-at32ap/cpufreq.c -+++ b/arch/avr32/mach-at32ap/cpufreq.c -@@ -40,6 +40,9 @@ static unsigned int at32_get_speed(unsigned int cpu) - return (unsigned int)((clk_get_rate(cpuclk) + 500) / 1000); - } - -+static unsigned int ref_freq; -+static unsigned long loops_per_jiffy_ref; -+ - static int at32_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -@@ -61,8 +64,19 @@ static int at32_set_target(struct cpufreq_policy *policy, - freqs.cpu = 0; - freqs.flags = 0; - -+ if (!ref_freq) { -+ ref_freq = freqs.old; -+ loops_per_jiffy_ref = boot_cpu_data.loops_per_jiffy; -+ } -+ - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); -+ if (freqs.old < freqs.new) -+ boot_cpu_data.loops_per_jiffy = cpufreq_scale( -+ loops_per_jiffy_ref, ref_freq, freqs.new); - clk_set_rate(cpuclk, freq); -+ if (freqs.new < freqs.old) -+ boot_cpu_data.loops_per_jiffy = cpufreq_scale( -+ loops_per_jiffy_ref, ref_freq, freqs.new); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - pr_debug("cpufreq: set frequency %lu Hz\n", freq); -diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c -index c36a6d5..b6870b5 100644 ---- a/arch/avr32/mach-at32ap/extint.c -+++ b/arch/avr32/mach-at32ap/extint.c -@@ -17,6 +17,8 @@ - - #include <asm/io.h> - -+#include <mach/cpu.h> -+ - /* EIC register offsets */ - #define EIC_IER 0x0000 - #define EIC_IDR 0x0004 -@@ -26,24 +28,18 @@ - #define EIC_MODE 0x0014 - #define EIC_EDGE 0x0018 - #define EIC_LEVEL 0x001c -+ -+/* This is only valid on v1 (AP700x) */ - #define EIC_NMIC 0x0024 -+# define EIC_NMIC_ENABLE (1 << 0) - --/* Bitfields in NMIC */ --#define EIC_NMIC_ENABLE (1 << 0) -- --/* Bit manipulation macros */ --#define EIC_BIT(name) \ -- (1 << EIC_##name##_OFFSET) --#define EIC_BF(name,value) \ -- (((value) & ((1 << EIC_##name##_SIZE) - 1)) \ -- << EIC_##name##_OFFSET) --#define EIC_BFEXT(name,value) \ -- (((value) >> EIC_##name##_OFFSET) \ -- & ((1 << EIC_##name##_SIZE) - 1)) --#define EIC_BFINS(name,value,old) \ -- (((old) & ~(((1 << EIC_##name##_SIZE) - 1) \ -- << EIC_##name##_OFFSET)) \ -- | EIC_BF(name,value)) -+/* These are only valid on v3 (AP720x) */ -+#define EIC_FILTER 0x0020 -+#define EIC_TEST 0x0024 -+#define EIC_ASYNC 0x0028 -+#define EIC_EN 0x0030 -+#define EIC_DIS 0x0034 -+#define EIC_CTRL 0x0038 - - /* Register access macros */ - #define eic_readl(port,reg) \ -@@ -60,36 +56,68 @@ struct eic { - static struct eic *nmi_eic; - static bool nmi_enabled; - -+static inline int eic_version(struct eic *eic) -+{ -+ if (cpu_is_at32ap7000()) -+ return 1; -+ if (cpu_is_at32ap7200()) -+ return 3; -+ -+ BUG(); -+} -+ -+static inline int eic_irq_bitmask(struct eic *eic, unsigned int irq) -+{ -+ irq -= eic->first_irq; -+ -+ if (eic_version(eic) > 2) -+ irq++; -+ return 1 << irq; -+} -+ - static void eic_ack_irq(unsigned int irq) - { - struct eic *eic = get_irq_chip_data(irq); -- eic_writel(eic, ICR, 1 << (irq - eic->first_irq)); -+ eic_writel(eic, ICR, eic_irq_bitmask(eic, irq)); - } - - static void eic_mask_irq(unsigned int irq) - { - struct eic *eic = get_irq_chip_data(irq); -- eic_writel(eic, IDR, 1 << (irq - eic->first_irq)); -+ eic_writel(eic, IDR, eic_irq_bitmask(eic, irq)); - } - - static void eic_mask_ack_irq(unsigned int irq) - { - struct eic *eic = get_irq_chip_data(irq); -- eic_writel(eic, ICR, 1 << (irq - eic->first_irq)); -- eic_writel(eic, IDR, 1 << (irq - eic->first_irq)); -+ eic_writel(eic, ICR, eic_irq_bitmask(eic, irq)); -+ eic_writel(eic, IDR, eic_irq_bitmask(eic, irq)); - } - - static void eic_unmask_irq(unsigned int irq) - { - struct eic *eic = get_irq_chip_data(irq); -- eic_writel(eic, IER, 1 << (irq - eic->first_irq)); -+ eic_writel(eic, IER, eic_irq_bitmask(eic, irq)); -+} -+ -+/* The following two hooks are only used on v2+ controllers */ -+static void eic_enable_irq(unsigned int irq) -+{ -+ struct eic *eic = get_irq_chip_data(irq); -+ eic_writel(eic, EN, eic_irq_bitmask(eic, irq)); -+} -+ -+static void eic_disable_irq(unsigned int irq) -+{ -+ struct eic *eic = get_irq_chip_data(irq); -+ eic_writel(eic, DIS, eic_irq_bitmask(eic, irq)); - } - - static int eic_set_irq_type(unsigned int irq, unsigned int flow_type) - { - struct eic *eic = get_irq_chip_data(irq); - struct irq_desc *desc; -- unsigned int i = irq - eic->first_irq; -+ unsigned int irq_bitmask = eic_irq_bitmask(eic, irq); - u32 mode, edge, level; - int ret = 0; - -@@ -105,20 +133,20 @@ static int eic_set_irq_type(unsigned int irq, unsigned int flow_type) - - switch (flow_type) { - case IRQ_TYPE_LEVEL_LOW: -- mode |= 1 << i; -- level &= ~(1 << i); -+ mode |= irq_bitmask; -+ level &= ~irq_bitmask; - break; - case IRQ_TYPE_LEVEL_HIGH: -- mode |= 1 << i; -- level |= 1 << i; -+ mode |= irq_bitmask; -+ level |= irq_bitmask; - break; - case IRQ_TYPE_EDGE_RISING: -- mode &= ~(1 << i); -- edge |= 1 << i; -+ mode &= ~irq_bitmask; -+ edge |= irq_bitmask; - break; - case IRQ_TYPE_EDGE_FALLING: -- mode &= ~(1 << i); -- edge &= ~(1 << i); -+ mode &= ~irq_bitmask; -+ edge &= ~irq_bitmask; - break; - default: - ret = -EINVAL; -@@ -160,6 +188,11 @@ static void demux_eic_irq(unsigned int irq, struct irq_desc *desc) - status = eic_readl(eic, ISR); - pending = status & eic_readl(eic, IMR); - -+ if (eic_version(eic) > 1) { -+ status >>= 1; -+ pending >>= 1; -+ } -+ - while (pending) { - i = fls(pending) - 1; - pending &= ~(1 << i); -@@ -172,16 +205,34 @@ int nmi_enable(void) - { - nmi_enabled = true; - -- if (nmi_eic) -- eic_writel(nmi_eic, NMIC, EIC_NMIC_ENABLE); -+ if (nmi_eic) { -+ if (eic_version(nmi_eic) > 2) { -+ eic_writel(nmi_eic, EN, 1 << 0); -+ eic_writel(nmi_eic, IER, 1 << 0); -+ } else if (eic_version(nmi_eic) > 1) { -+ eic_writel(nmi_eic, EN, 1 << 8); -+ eic_writel(nmi_eic, IER, 1 << 8); -+ } else { -+ eic_writel(nmi_eic, NMIC, EIC_NMIC_ENABLE); -+ } -+ } - - return 0; - } - - void nmi_disable(void) - { -- if (nmi_eic) -- eic_writel(nmi_eic, NMIC, 0); -+ if (nmi_eic) { -+ if (eic_version(nmi_eic) > 2) { -+ eic_writel(nmi_eic, IDR, 1 << 0); -+ eic_writel(nmi_eic, DIS, 1 << 0); -+ } else if (eic_version(nmi_eic) > 1) { -+ eic_writel(nmi_eic, IDR, 1 << 8); -+ eic_writel(nmi_eic, DIS, 1 << 8); -+ } else { -+ eic_writel(nmi_eic, NMIC, 0); -+ } -+ } - - nmi_enabled = false; - } -@@ -230,6 +281,15 @@ static int __init eic_probe(struct platform_device *pdev) - eic_writel(eic, EDGE, 0UL); - eic_writel(eic, LEVEL, 0UL); - -+ /* -+ * v2+ controllers have an extra enable/disable/mask set of -+ * registers. -+ */ -+ if (eic_version(eic) >= 2) { -+ eic_chip.enable = eic_enable_irq; -+ eic_chip.disable = eic_disable_irq; -+ } -+ - eic->chip = &eic_chip; - - for (i = 0; i < nr_irqs; i++) { -diff --git a/arch/avr32/mach-at32ap/gpio-v2.c b/arch/avr32/mach-at32ap/gpio-v2.c -new file mode 100644 -index 0000000..63b8943 ---- /dev/null -+++ b/arch/avr32/mach-at32ap/gpio-v2.c -@@ -0,0 +1,534 @@ -+/* -+ * Atmel GPIO Port Multiplexer support -+ * -+ * Copyright (C) 2004-2008 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/clk.h> -+#include <linux/debugfs.h> -+#include <linux/fs.h> -+#include <linux/gpio.h> -+#include <linux/io.h> -+#include <linux/irq.h> -+#include <linux/platform_device.h> -+ -+#include <mach/portmux.h> -+#include <mach/chip.h> -+ -+#include "gpio-v2.h" -+ -+/* -+ * One chip corresponds with one bank of I/O registers. They're really -+ * all on the same controller. -+ */ -+struct atmel_gpio_chip { -+ void __iomem *regs; -+ u32 pinmux_mask; -+ struct gpio_chip chip; -+ char name[8]; -+ unsigned int bank; -+ int irq; -+}; -+ -+/* ...which means we only have one clock and one platform device */ -+static struct clk *gpio_clk; -+static struct atmel_gpio_chip gpio_dev[NR_GPIO_BANKS]; -+ -+/* Pin multiplexing API */ -+static DEFINE_SPINLOCK(gpio_lock); -+ -+static struct atmel_gpio_chip *to_atmel_gpio_chip(struct gpio_chip *chip) -+{ -+ return container_of(chip, struct atmel_gpio_chip, chip); -+} -+ -+static struct atmel_gpio_chip *pin_to_chip(unsigned int gpio) -+{ -+ struct atmel_gpio_chip *chip; -+ unsigned int index; -+ -+ index = gpio >> 5; -+ if (index >= NR_GPIO_BANKS) -+ return NULL; -+ chip = &gpio_dev[index]; -+ if (!chip->regs) -+ return NULL; -+ -+ return chip; -+} -+ -+/* Pin multiplexing API */ -+ -+void __init at32_select_periph(unsigned int port, u32 pin_mask, -+ unsigned int periph, unsigned long flags) -+{ -+ struct atmel_gpio_chip *chip; -+ -+ chip = pin_to_chip(port); -+ if (unlikely(!chip)) { -+ printk("GPIO: invalid port %u\n", port); -+ goto fail; -+ } -+ -+ /* Test if any of the requested pins is already muxed */ -+ spin_lock(&gpio_lock); -+ if (unlikely(gpiochip_is_requested(&chip->chip, port) -+ || unlikely(pin_mask & chip->pinmux_mask))) { -+ printk(KERN_WARNING "%s: pin(s) busy (requested 0x%x, busy 0x%x)\n", -+ chip->name, pin_mask, chip->pinmux_mask & pin_mask); -+ spin_unlock(&gpio_lock); -+ goto fail; -+ } -+ -+ switch (periph) { -+ case GPIO_PERIPH_A: -+ gpio_writel(chip, PMR0C, pin_mask); -+ gpio_writel(chip, PMR1C, pin_mask); -+ break; -+ case GPIO_PERIPH_B: -+ gpio_writel(chip, PMR0S, pin_mask); -+ gpio_writel(chip, PMR1C, pin_mask); -+ break; -+ case GPIO_PERIPH_C: -+ gpio_writel(chip, PMR0C, pin_mask); -+ gpio_writel(chip, PMR1S, pin_mask); -+ break; -+ case GPIO_PERIPH_D: -+ gpio_writel(chip, PMR0S, pin_mask); -+ gpio_writel(chip, PMR1S, pin_mask); -+ break; -+ default: -+ printk("%s: unknown function for pin mask %u\n", -+ chip->name, pin_mask); -+ goto fail; -+ } -+ -+ gpio_writel(chip, PUERS, pin_mask); -+ -+ gpio_writel(chip, GPERC, pin_mask); -+ if (!(flags & AT32_GPIOF_PULLUP)) -+ gpio_writel(chip, PUERC, pin_mask); -+ -+ spin_unlock(&gpio_lock); -+ -+ return; -+ -+fail: -+ dump_stack(); -+} -+ -+void __init at32_select_gpio(unsigned int pin, unsigned long flags) -+{ -+ struct atmel_gpio_chip *chip; -+ unsigned int pin_index = pin & 0x1f; -+ u32 mask = 1 << pin_index; -+ -+ chip = pin_to_chip(pin); -+ if (unlikely(!chip)) { -+ printk("GPIO: invalid pin %u\n", pin); -+ goto fail; -+ } -+ -+ if (unlikely(test_and_set_bit(pin_index, &chip->pinmux_mask))) { -+ printk("%s: pin %u is busy\n", chip->name, pin_index); -+ goto fail; -+ } -+ -+ if (flags & AT32_GPIOF_PULLUP) -+ gpio_writel(chip, PUERS, mask); -+ else -+ gpio_writel(chip, PUERC, mask); -+ if (flags & AT32_GPIOF_MULTIDRV) -+ gpio_writel(chip, ODMERS, mask); -+ else -+ gpio_writel(chip, ODMERC, mask); -+ if (flags & AT32_GPIOF_DEGLITCH) -+ gpio_writel(chip, GFERS, mask); -+ else -+ gpio_writel(chip, GFERC, mask); -+ -+ if (flags & AT32_GPIOF_OUTPUT) { -+ if (flags & AT32_GPIOF_HIGH) -+ gpio_writel(chip, OVRS, mask); -+ else -+ gpio_writel(chip, OVRC, mask); -+ gpio_writel(chip, ODERS, mask); -+ } else { -+ gpio_writel(chip, ODERC, mask); -+ } -+ -+ gpio_writel(chip, GPERS, mask); -+ -+ return; -+ -+fail: -+ dump_stack(); -+} -+ -+/* Reserve a pin, preventing anyone else from changing its configuration. */ -+void __init at32_reserve_pin(unsigned int port, u32 pin_mask) -+{ -+ struct atmel_gpio_chip *chip; -+ -+ chip = pin_to_chip(port); -+ if (unlikely(!chip)) { -+ printk("GPIO: invalid port %u\n", port); -+ goto fail; -+ } -+ -+ /* Test if any of the requested pins is already muxed */ -+ spin_lock(&gpio_lock); -+ if (unlikely(pin_mask & chip->pinmux_mask)) { -+ printk(KERN_WARNING "%s: pin(s) busy (req. 0x%x, busy 0x%x)\n", -+ chip->name, pin_mask, chip->pinmux_mask & pin_mask); -+ spin_unlock(&gpio_lock); -+ goto fail; -+ } -+ -+ /* Reserve pins */ -+ chip->pinmux_mask |= pin_mask; -+ spin_unlock(&gpio_lock); -+ return; -+ -+fail: -+ dump_stack(); -+} -+ -+/*--------------------------------------------------------------------------*/ -+ -+/* GPIO API */ -+ -+static int get_pin_state(struct gpio_chip *chip, unsigned int offset) -+{ -+ struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip); -+ -+ return (gpio_readl(gpio, PVR) >> offset) & 1; -+} -+ -+static void set_pin_state(struct gpio_chip *chip, unsigned int offset, int high) -+{ -+ struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip); -+ u32 mask = 1 << offset; -+ -+ if (high) -+ gpio_writel(gpio, OVRS, mask); -+ else -+ gpio_writel(gpio, OVRC, mask); -+} -+ -+static int direction_input(struct gpio_chip *chip, unsigned int offset) -+{ -+ struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip); -+ u32 mask = 1 << offset; -+ -+ if (!(gpio_readl(gpio, GPER) & mask)) -+ return -EINVAL; -+ -+ gpio_writel(gpio, ODERC, mask); -+ return 0; -+} -+ -+static int direction_output(struct gpio_chip *chip, unsigned int offset, -+ int high) -+{ -+ struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip); -+ u32 mask = 1 << offset; -+ -+ if (!(gpio_readl(gpio, GPER) & mask)) -+ return -EINVAL; -+ -+ set_pin_state(chip, offset, high); -+ gpio_writel(gpio, ODERS, mask); -+ return 0; -+} -+ -+/*--------------------------------------------------------------------------*/ -+ -+/* GPIO IRQ support */ -+ -+static void gpio_irq_mask(unsigned irq) -+{ -+ unsigned int pin = irq_to_gpio(irq); -+ struct atmel_gpio_chip *chip = &gpio_dev[pin >> 5]; -+ -+ gpio_writel(chip, IERC, 1 << (pin & 0x1f)); -+} -+ -+static void gpio_irq_unmask(unsigned irq) -+{ -+ unsigned int pin = irq_to_gpio(irq); -+ struct atmel_gpio_chip *chip = &gpio_dev[pin >> 5]; -+ -+ gpio_writel(chip, IERS, 1 << (pin & 0x1f)); -+} -+ -+static int gpio_irq_type(unsigned irq, unsigned type) -+{ -+ unsigned int pin = irq_to_gpio(irq); -+ struct atmel_gpio_chip *chip = &gpio_dev[pin >> 5]; -+ u32 mask = 1 << (pin & 0x1f); -+ -+ switch (type) { -+ case IRQ_TYPE_EDGE_FALLING: -+ gpio_writel(chip, IMR0C, mask); -+ gpio_writel(chip, IMR1S, mask); -+ break; -+ case IRQ_TYPE_EDGE_RISING: -+ gpio_writel(chip, IMR0S, mask); -+ gpio_writel(chip, IMR1C, mask); -+ break; -+ case IRQ_TYPE_NONE: -+ /* fall through */ -+ case IRQ_TYPE_EDGE_BOTH: -+ gpio_writel(chip, IMR0C, mask); -+ gpio_writel(chip, IMR1C, mask); -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static struct irq_chip gpio_irqchip = { -+ .name = "gpio", -+ .mask = gpio_irq_mask, -+ .unmask = gpio_irq_unmask, -+ .set_type = gpio_irq_type, -+}; -+ -+static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) -+{ -+ struct atmel_gpio_chip *chip = get_irq_chip_data(irq); -+ unsigned int gpio_irq; -+ -+ gpio_irq = (unsigned int) get_irq_data(irq); -+ for (;;) { -+ u32 ifr; -+ struct irq_desc *d; -+ -+ /* ack pending GPIO interrupts */ -+ ifr = gpio_readl(chip, IFR); -+ if (!ifr) -+ break; -+ do { -+ int pin; -+ -+ pin = ffs(ifr) - 1; -+ ifr &= ~(1 << pin); -+ gpio_writel(chip, IFRC, (1 << pin)); -+ -+ pin += gpio_irq; -+ d = &irq_desc[pin]; -+ -+ d->handle_irq(pin, d); -+ } while (ifr); -+ } -+} -+ -+static void __init -+gpio_irq_setup(struct atmel_gpio_chip *chip, int irq, int gpio_irq) -+{ -+ unsigned i; -+ -+ set_irq_chip_data(irq, chip); -+ set_irq_data(irq, (void *) gpio_irq); -+ -+ for (i = 0; i < 32; i++, gpio_irq++) { -+ set_irq_chip_data(gpio_irq, chip); -+ set_irq_chip_and_handler(gpio_irq, &gpio_irqchip, -+ handle_simple_irq); -+ } -+ -+ set_irq_chained_handler(irq, gpio_irq_handler); -+} -+ -+/*--------------------------------------------------------------------------*/ -+ -+#ifdef CONFIG_DEBUG_FS -+ -+#include <linux/seq_file.h> -+ -+/* -+ * This shows more info than the generic gpio dump code: -+ * pullups, deglitching, open drain drive. -+ */ -+static void gpio_bank_show(struct seq_file *s, struct gpio_chip *chip) -+{ -+ struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip); -+ u32 oder, ovr, puer, pder, gfer, odmer, ier, imr0, imr1; -+ unsigned int i; -+ u32 mask; -+ -+ oder = gpio_readl(gpio, ODER); -+ ovr = gpio_readl(gpio, OVR); -+ puer = gpio_readl(gpio, PUER); -+ pder = gpio_readl(gpio, PDER); -+ gfer = gpio_readl(gpio, GFER); -+ odmer = gpio_readl(gpio, ODMER); -+ ier = gpio_readl(gpio, IER); -+ imr0 = gpio_readl(gpio, IMR0); -+ imr1 = gpio_readl(gpio, IMR1); -+ -+ for (i = 0, mask = 1; i < 32; i++, mask <<= 1) { -+ const char *label; -+ -+ label = gpiochip_is_requested(chip, i); -+ if (!label) -+ continue; -+ -+ seq_printf(s, " gpio-%-3d ", chip->base + i); -+ gpio_decode_pin(s, gpio->bank, i); -+ seq_printf(s, " (%-12s) %s %s", label, -+ (oder & mask) ? "out" : "in", -+ (ovr & mask) ? "hi" : "lo"); -+ if ((puer & mask) && !(pder & mask)) -+ seq_printf(s, " pull-up"); -+ else if (!(puer & mask) && (pder & mask)) -+ seq_printf(s, " pull-down"); -+ else if ((puer & mask) && (pder & mask)) -+ seq_printf(s, " buskeeper"); -+ if (gfer & mask) -+ seq_printf(s, " deglitch"); -+ if (odmer & mask) -+ seq_printf(s, " open-drain"); -+ if ((gpio->irq >= 0) && (ier & mask)) { -+ seq_printf(s, " irq-%d edge-", -+ gpio_to_irq(chip->base + i)); -+ if (!(imr0 & mask) && !(imr1 & mask)) -+ seq_printf(s, "both"); -+ else if ((imr0 & mask) && !(imr1 & mask)) -+ seq_printf(s, "rising"); -+ else if (!(imr0 & mask) && (imr1 & mask)) -+ seq_printf(s, "falling"); -+ else -+ seq_printf(s, "INVALID"); -+ } -+ seq_printf(s, "\n"); -+ } -+} -+ -+#else -+#define gpio_bank_show NULL -+#endif -+ -+static int __init gpio_probe(struct platform_device *pdev) -+{ -+ struct resource *regs; -+ struct resource *irqs; -+ int irq = -1; -+ unsigned int i; -+ -+ BUG_ON(pdev->id >= 1); -+ -+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!regs) { -+ dev_err(&pdev->dev, "no mmio resource defined\n"); -+ return -ENXIO; -+ } -+ irqs = platform_get_resource(pdev, IORESOURCE_IRQ, 0); -+ if (irqs) -+ irq = irqs->start; -+ -+ for (i = 0; i < NR_GPIO_BANKS; i++) { -+ unsigned int gpio_irq_base; -+ struct atmel_gpio_chip *chip; -+ -+ chip = &gpio_dev[i]; -+ BUG_ON(!chip->regs); -+ -+ chip->chip.label = chip->name; -+ chip->chip.base = i * 32; -+ chip->chip.ngpio = 32; -+ -+ chip->chip.direction_input = direction_input; -+ chip->chip.get = get_pin_state; -+ chip->chip.direction_output = direction_output; -+ chip->chip.set = set_pin_state; -+ chip->chip.dbg_show = gpio_bank_show; -+ -+ gpiochip_add(&chip->chip); -+ -+ gpio_irq_base = GPIO_IRQ_BASE + (i * 32); -+ if (irqs && irq <= irqs->end) { -+ gpio_irq_setup(chip, irq, gpio_irq_base); -+ chip->irq = irq; -+ irq++; -+ } else { -+ chip->irq = -1; -+ } -+ -+ platform_set_drvdata(pdev, chip); -+ -+ printk(KERN_DEBUG "%s: base 0x%p", chip->name, chip->regs); -+ if (chip->irq >= 0) -+ printk(" irq %d chains %d..%d", irq, -+ gpio_irq_base, gpio_irq_base + 31); -+ printk("\n"); -+ } -+ -+ return 0; -+} -+ -+static struct platform_driver gpio_driver = { -+ .probe = gpio_probe, -+ .driver = { -+ .name = "gpio", -+ }, -+}; -+ -+static int __init gpio_init(void) -+{ -+ return platform_driver_register(&gpio_driver); -+} -+postcore_initcall(gpio_init); -+ -+void __init at32_gpio_init(struct platform_device *pdev) -+{ -+ int i; -+ struct clk *clk; -+ struct resource *regs; -+ void __iomem *iomem_base; -+ struct atmel_gpio_chip *chip; -+ -+ if (pdev->id > 0) { -+ dev_err(&pdev->dev, "only one GPIO controller supported\n"); -+ return; -+ } -+ -+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!regs) { -+ dev_err(&pdev->dev, "no mmio resource defined\n"); -+ return; -+ } -+ -+ clk = clk_get(&pdev->dev, "pclk"); -+ if (IS_ERR(clk)) { -+ dev_err(&pdev->dev, "no mck clock defined\n"); -+ return; -+ } -+ clk_enable(clk); -+ -+ gpio_clk = clk; -+ -+ /* -+ * We may get called too early for ioremap() to work. But we -+ * know that the GPIO registers are permanently mapped 1:1 -+ */ -+ iomem_base = (void __iomem __force *)regs->start; -+ -+ for (i = 0; i < NR_GPIO_BANKS; i++) { -+ chip = &gpio_dev[i]; -+ snprintf(chip->name, sizeof(chip->name), "gpio%d", i); -+ chip->regs = iomem_base + (i * 0x200); -+ chip->bank = i; -+ -+ /* start with irqs disabled and acked */ -+ gpio_writel(chip, IERC, ~0UL); -+ gpio_writel(chip, IFRC, ~0UL); -+ } -+} -diff --git a/arch/avr32/mach-at32ap/gpio-v2.h b/arch/avr32/mach-at32ap/gpio-v2.h -new file mode 100644 -index 0000000..77e4105 ---- /dev/null -+++ b/arch/avr32/mach-at32ap/gpio-v2.h -@@ -0,0 +1,116 @@ -+/* -+ * Copyright (C) 2008 Atmel Corporation -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+#ifndef __GPIO_REGS_H__ -+#define __GPIO_REGS_H__ -+ -+/* Register offsets */ -+struct gpio_regs { -+ u32 GPER; -+ u32 GPERS; -+ u32 GPERC; -+ u32 GPERT; -+ u32 PMR0; -+ u32 PMR0S; -+ u32 PMR0C; -+ u32 PMR0T; -+ u32 PMR1; -+ u32 PMR1S; -+ u32 PMR1C; -+ u32 PMR1T; -+ u32 __reserved0[4]; -+ u32 ODER; -+ u32 ODERS; -+ u32 ODERC; -+ u32 ODERT; -+ u32 OVR; -+ u32 OVRS; -+ u32 OVRC; -+ u32 OVRT; -+ u32 PVR; -+ u32 __reserved_PVRS; -+ u32 __reserved_PVRC; -+ u32 __reserved_PVRT; -+ u32 PUER; -+ u32 PUERS; -+ u32 PUERC; -+ u32 PUERT; -+ u32 PDER; -+ u32 PDERS; -+ u32 PDERC; -+ u32 PDERT; -+ u32 IER; -+ u32 IERS; -+ u32 IERC; -+ u32 IERT; -+ u32 IMR0; -+ u32 IMR0S; -+ u32 IMR0C; -+ u32 IMR0T; -+ u32 IMR1; -+ u32 IMR1S; -+ u32 IMR1C; -+ u32 IMR1T; -+ u32 GFER; -+ u32 GFERS; -+ u32 GFERC; -+ u32 GFERT; -+ u32 IFR; -+ u32 __reserved_IFRS; -+ u32 IFRC; -+ u32 __reserved_IFRT; -+ u32 ODMER; -+ u32 ODMERS; -+ u32 ODMERC; -+ u32 ODMERT; -+ u32 __reserved1[4]; -+ u32 ODCR0; -+ u32 ODCR0S; -+ u32 ODCR0C; -+ u32 ODCR0T; -+ u32 ODCR1; -+ u32 ODCR1S; -+ u32 ODCR1C; -+ u32 ODCR1T; -+ u32 __reserved2[4]; -+ u32 OSRR0; -+ u32 OSRR0S; -+ u32 OSRR0C; -+ u32 OSRR0T; -+ u32 __reserved3[8]; -+ u32 STER; -+ u32 STERS; -+ u32 STERC; -+ u32 STERT; -+ u32 __reserved4[35]; -+ u32 VERSION; -+}; -+ -+/* Register access macros */ -+#define __gpio_regs(bank) ((struct gpio_regs __iomem *)(bank)->regs) -+#define gpio_readl(bank, reg) \ -+ __raw_readl(&__gpio_regs(bank)->reg) -+#define gpio_writel(bank, reg, value) \ -+ __raw_writel(value, &__gpio_regs(bank)->reg) -+ -+void at32_gpio_init(struct platform_device *pdev); -+ -+#endif /* __GPIO_REGS_H__ */ -diff --git a/arch/avr32/mach-at32ap/hmatrix.c b/arch/avr32/mach-at32ap/hmatrix.c -index 48f5ede..2f55e69 100644 ---- a/arch/avr32/mach-at32ap/hmatrix.c -+++ b/arch/avr32/mach-at32ap/hmatrix.c -@@ -54,6 +54,81 @@ u32 hmatrix_read_reg(unsigned long offset) - } - - /** -+ * hmatrix_set_default_master - set default master on a given slave -+ * @slave: HSB slave interface ID -+ * @master: HSB master interface ID -+ */ -+void hmatrix_set_default_master(unsigned int slave, unsigned int master) -+{ -+ u32 value; -+ unsigned int reg; -+ -+ WARN_ON(slave > HMATRIX_MAX_SLAVE -+ || master > HMATRIX_MASTER_LAST); -+ -+ reg = HMATRIX_SCFG(slave); -+ -+ clk_enable(&at32_hmatrix_clk); -+ value = __hmatrix_read_reg(reg); -+ value &= ~(HMATRIX_SCFG_FIXED_DEFMSTR(HMATRIX_MAX_SLAVE) -+ | HMATRIX_SCFG_DEFMSTR_MASK); -+ -+ switch (master) { -+ case HMATRIX_MASTER_NONE: -+ value |= HMATRIX_SCFG_DEFMSTR_NONE; -+ break; -+ case HMATRIX_MASTER_LAST: -+ value |= HMATRIX_SCFG_DEFMSTR_LAST; -+ break; -+ default: -+ value |= HMATRIX_SCFG_DEFMSTR_FIXED; -+ value |= HMATRIX_SCFG_FIXED_DEFMSTR(master); -+ break; -+ } -+ -+ __hmatrix_write_reg(reg, value); -+ __hmatrix_read_reg(reg); -+ clk_disable(&at32_hmatrix_clk); -+} -+ -+/** -+ * hmatrix_set_priority - set the priority of a master on a given slave -+ * @slave: HSB slave interface ID -+ * @master: HSB master interface ID -+ * @priority: Priority of @master when competing for access to @slave. -+ * -+ * Note that this is currently broken -- we need some way to enable -+ * fixed-priority arbitration, and that happens to be broken on AP7000 -+ * rev C. -+ */ -+void hmatrix_set_priority(unsigned int slave, unsigned int master, -+ unsigned int priority) -+{ -+ u32 value; -+ unsigned int reg; -+ -+ WARN_ON(slave > HMATRIX_MAX_SLAVE -+ || master > HMATRIX_MAX_MASTER -+ || priority > HMATRIX_MAX_PRIO); -+ -+ clk_enable(&at32_hmatrix_clk); -+ if (master < 8) { -+ reg = HMATRIX_PRAS(slave); -+ value = __hmatrix_read_reg(reg); -+ value &= ~HMATRIX_PRAS_PRIO(master, HMATRIX_MAX_PRIO); -+ value |= HMATRIX_PRAS_PRIO(master, priority); -+ } else { -+ reg = HMATRIX_PRBS(slave); -+ value = __hmatrix_read_reg(reg); -+ value &= ~HMATRIX_PRBS_PRIO(master, HMATRIX_MAX_PRIO); -+ value |= HMATRIX_PRBS_PRIO(master, priority); -+ } -+ __hmatrix_write_reg(reg, value); -+ __hmatrix_read_reg(reg); -+ clk_disable(&at32_hmatrix_clk); -+} -+ -+/** - * hmatrix_sfr_set_bits - set bits in a slave's Special Function Register - * @slave_id: operate on the SFR belonging to this slave - * @mask: mask of bits to be set in the SFR -diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c -index 2875c11..3152e0f 100644 ---- a/arch/avr32/mach-at32ap/hsmc.c -+++ b/arch/avr32/mach-at32ap/hsmc.c -@@ -229,10 +229,8 @@ static int hsmc_probe(struct platform_device *pdev) - if (IS_ERR(pclk)) - return PTR_ERR(pclk); - mck = clk_get(&pdev->dev, "mck"); -- if (IS_ERR(mck)) { -- ret = PTR_ERR(mck); -- goto out_put_pclk; -- } -+ if (IS_ERR(mck)) -+ mck = pclk; - - ret = -ENOMEM; - hsmc = kzalloc(sizeof(struct hsmc), GFP_KERNEL); -@@ -260,8 +258,8 @@ out_disable_clocks: - clk_disable(pclk); - kfree(hsmc); - out_put_clocks: -- clk_put(mck); --out_put_pclk: -+ if (mck != pclk) -+ clk_put(mck); - clk_put(pclk); - hsmc = NULL; - return ret; -diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h -index 1e9852d..5c4c971 100644 ---- a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h -+++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h -@@ -83,4 +83,135 @@ - #define HMATRIX_BASE 0xfff00800 - #define SDRAMC_BASE 0xfff03800 - -+/* LCDC on port C */ -+#define ATMEL_LCDC_PC_CC (1ULL << 19) -+#define ATMEL_LCDC_PC_HSYNC (1ULL << 20) -+#define ATMEL_LCDC_PC_PCLK (1ULL << 21) -+#define ATMEL_LCDC_PC_VSYNC (1ULL << 22) -+#define ATMEL_LCDC_PC_DVAL (1ULL << 23) -+#define ATMEL_LCDC_PC_MODE (1ULL << 24) -+#define ATMEL_LCDC_PC_PWR (1ULL << 25) -+#define ATMEL_LCDC_PC_DATA0 (1ULL << 26) -+#define ATMEL_LCDC_PC_DATA1 (1ULL << 27) -+#define ATMEL_LCDC_PC_DATA2 (1ULL << 28) -+#define ATMEL_LCDC_PC_DATA3 (1ULL << 29) -+#define ATMEL_LCDC_PC_DATA4 (1ULL << 30) -+#define ATMEL_LCDC_PC_DATA5 (1ULL << 31) -+ -+/* LCDC on port D */ -+#define ATMEL_LCDC_PD_DATA6 (1ULL << 0) -+#define ATMEL_LCDC_PD_DATA7 (1ULL << 1) -+#define ATMEL_LCDC_PD_DATA8 (1ULL << 2) -+#define ATMEL_LCDC_PD_DATA9 (1ULL << 3) -+#define ATMEL_LCDC_PD_DATA10 (1ULL << 4) -+#define ATMEL_LCDC_PD_DATA11 (1ULL << 5) -+#define ATMEL_LCDC_PD_DATA12 (1ULL << 6) -+#define ATMEL_LCDC_PD_DATA13 (1ULL << 7) -+#define ATMEL_LCDC_PD_DATA14 (1ULL << 8) -+#define ATMEL_LCDC_PD_DATA15 (1ULL << 9) -+#define ATMEL_LCDC_PD_DATA16 (1ULL << 10) -+#define ATMEL_LCDC_PD_DATA17 (1ULL << 11) -+#define ATMEL_LCDC_PD_DATA18 (1ULL << 12) -+#define ATMEL_LCDC_PD_DATA19 (1ULL << 13) -+#define ATMEL_LCDC_PD_DATA20 (1ULL << 14) -+#define ATMEL_LCDC_PD_DATA21 (1ULL << 15) -+#define ATMEL_LCDC_PD_DATA22 (1ULL << 16) -+#define ATMEL_LCDC_PD_DATA23 (1ULL << 17) -+ -+/* LCDC on port E */ -+#define ATMEL_LCDC_PE_CC (1ULL << (32 + 0)) -+#define ATMEL_LCDC_PE_DVAL (1ULL << (32 + 1)) -+#define ATMEL_LCDC_PE_MODE (1ULL << (32 + 2)) -+#define ATMEL_LCDC_PE_DATA0 (1ULL << (32 + 3)) -+#define ATMEL_LCDC_PE_DATA1 (1ULL << (32 + 4)) -+#define ATMEL_LCDC_PE_DATA2 (1ULL << (32 + 5)) -+#define ATMEL_LCDC_PE_DATA3 (1ULL << (32 + 6)) -+#define ATMEL_LCDC_PE_DATA4 (1ULL << (32 + 7)) -+#define ATMEL_LCDC_PE_DATA8 (1ULL << (32 + 8)) -+#define ATMEL_LCDC_PE_DATA9 (1ULL << (32 + 9)) -+#define ATMEL_LCDC_PE_DATA10 (1ULL << (32 + 10)) -+#define ATMEL_LCDC_PE_DATA11 (1ULL << (32 + 11)) -+#define ATMEL_LCDC_PE_DATA12 (1ULL << (32 + 12)) -+#define ATMEL_LCDC_PE_DATA16 (1ULL << (32 + 13)) -+#define ATMEL_LCDC_PE_DATA17 (1ULL << (32 + 14)) -+#define ATMEL_LCDC_PE_DATA18 (1ULL << (32 + 15)) -+#define ATMEL_LCDC_PE_DATA19 (1ULL << (32 + 16)) -+#define ATMEL_LCDC_PE_DATA20 (1ULL << (32 + 17)) -+#define ATMEL_LCDC_PE_DATA21 (1ULL << (32 + 18)) -+ -+ -+#define ATMEL_LCDC(PORT, PIN) (ATMEL_LCDC_##PORT##_##PIN) -+ -+ -+#define ATMEL_LCDC_PRI_24B_DATA ( \ -+ ATMEL_LCDC(PC, DATA0) | ATMEL_LCDC(PC, DATA1) | \ -+ ATMEL_LCDC(PC, DATA2) | ATMEL_LCDC(PC, DATA3) | \ -+ ATMEL_LCDC(PC, DATA4) | ATMEL_LCDC(PC, DATA5) | \ -+ ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \ -+ ATMEL_LCDC(PD, DATA8) | ATMEL_LCDC(PD, DATA9) | \ -+ ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) | \ -+ ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA13) | \ -+ ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \ -+ ATMEL_LCDC(PD, DATA16) | ATMEL_LCDC(PD, DATA17) | \ -+ ATMEL_LCDC(PD, DATA18) | ATMEL_LCDC(PD, DATA19) | \ -+ ATMEL_LCDC(PD, DATA20) | ATMEL_LCDC(PD, DATA21) | \ -+ ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23)) -+ -+#define ATMEL_LCDC_ALT_24B_DATA ( \ -+ ATMEL_LCDC(PE, DATA0) | ATMEL_LCDC(PE, DATA1) | \ -+ ATMEL_LCDC(PE, DATA2) | ATMEL_LCDC(PE, DATA3) | \ -+ ATMEL_LCDC(PE, DATA4) | ATMEL_LCDC(PC, DATA5) | \ -+ ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \ -+ ATMEL_LCDC(PE, DATA8) | ATMEL_LCDC(PE, DATA9) | \ -+ ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) | \ -+ ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PD, DATA13) | \ -+ ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \ -+ ATMEL_LCDC(PE, DATA16) | ATMEL_LCDC(PE, DATA17) | \ -+ ATMEL_LCDC(PE, DATA18) | ATMEL_LCDC(PE, DATA19) | \ -+ ATMEL_LCDC(PE, DATA20) | ATMEL_LCDC(PE, DATA21) | \ -+ ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23)) -+ -+#define ATMEL_LCDC_PRI_15B_DATA ( \ -+ ATMEL_LCDC(PC, DATA0) | ATMEL_LCDC(PC, DATA1) | \ -+ ATMEL_LCDC(PC, DATA2) | ATMEL_LCDC(PC, DATA3) | \ -+ ATMEL_LCDC(PC, DATA4) | ATMEL_LCDC(PC, DATA5) | \ -+ ATMEL_LCDC(PD, DATA8) | ATMEL_LCDC(PD, DATA9) | \ -+ ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) | \ -+ ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA16) | \ -+ ATMEL_LCDC(PD, DATA17) | ATMEL_LCDC(PD, DATA18) | \ -+ ATMEL_LCDC(PD, DATA19) | ATMEL_LCDC(PD, DATA20)) -+ -+#define ATMEL_LCDC_ALT_15B_DATA ( \ -+ ATMEL_LCDC(PE, DATA0) | ATMEL_LCDC(PE, DATA1) | \ -+ ATMEL_LCDC(PE, DATA2) | ATMEL_LCDC(PE, DATA3) | \ -+ ATMEL_LCDC(PE, DATA4) | ATMEL_LCDC(PC, DATA5) | \ -+ ATMEL_LCDC(PE, DATA8) | ATMEL_LCDC(PE, DATA9) | \ -+ ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) | \ -+ ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PE, DATA16) | \ -+ ATMEL_LCDC(PE, DATA17) | ATMEL_LCDC(PE, DATA18) | \ -+ ATMEL_LCDC(PE, DATA19) | ATMEL_LCDC(PE, DATA20)) -+ -+#define ATMEL_LCDC_PRI_CONTROL ( \ -+ ATMEL_LCDC(PC, CC) | ATMEL_LCDC(PC, DVAL) | \ -+ ATMEL_LCDC(PC, MODE) | ATMEL_LCDC(PC, PWR)) -+ -+#define ATMEL_LCDC_ALT_CONTROL ( \ -+ ATMEL_LCDC(PE, CC) | ATMEL_LCDC(PE, DVAL) | \ -+ ATMEL_LCDC(PE, MODE) | ATMEL_LCDC(PC, PWR)) -+ -+#define ATMEL_LCDC_CONTROL ( \ -+ ATMEL_LCDC(PC, HSYNC) | ATMEL_LCDC(PC, VSYNC) | \ -+ ATMEL_LCDC(PC, PCLK)) -+ -+#define ATMEL_LCDC_PRI_24BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_24B_DATA) -+ -+#define ATMEL_LCDC_ALT_24BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_24B_DATA) -+ -+#define ATMEL_LCDC_PRI_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_15B_DATA) -+ -+#define ATMEL_LCDC_ALT_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_15B_DATA) -+ -+/* Bitmask for all EBI data (D16..D31) pins on port E */ -+#define ATMEL_EBI_PE_DATA_ALL (0x0000FFFF) -+ - #endif /* __ASM_ARCH_AT32AP700X_H__ */ -diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap720x.h b/arch/avr32/mach-at32ap/include/mach/at32ap720x.h -new file mode 100644 -index 0000000..5a3082a ---- /dev/null -+++ b/arch/avr32/mach-at32ap/include/mach/at32ap720x.h -@@ -0,0 +1,105 @@ -+/* -+ * Pin definitions for AT32AP7200 -+ * -+ * Copyright (C) 2007 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#ifndef __ASM_ARCH_AT32AP7200_H__ -+#define __ASM_ARCH_AT32AP7200_H__ -+ -+#define GPIO_PERIPH_A 0x00 -+#define GPIO_PERIPH_B 0x01 -+#define GPIO_PERIPH_C 0x02 -+#define GPIO_PERIPH_D 0x03 -+ -+#define NR_GPIO_BANKS 8 -+ -+/* -+ * Pin numbers identifying specific GPIO pins on the chip. They can -+ * also be converted to IRQ numbers by passing them through -+ * gpio_to_irq(). -+ */ -+#define GPIO_BASE (0) -+ -+#define GPIO_PA_BASE (GPIO_BASE + 0 * 32) -+#define GPIO_PB_BASE (GPIO_BASE + 1 * 32) -+#define GPIO_PC_BASE (GPIO_BASE + 2 * 32) -+#define GPIO_PD_BASE (GPIO_BASE + 3 * 32) -+#define GPIO_PE_BASE (GPIO_BASE + 4 * 32) -+#define GPIO_PF_BASE (GPIO_BASE + 5 * 32) -+#define GPIO_PX_BASE (GPIO_BASE + 6 * 32) -+ -+#define GPIO_PIN_PA(N) (GPIO_PA_BASE + (N)) -+#define GPIO_PIN_PB(N) (GPIO_PB_BASE + (N)) -+#define GPIO_PIN_PC(N) (GPIO_PC_BASE + (N)) -+#define GPIO_PIN_PD(N) (GPIO_PD_BASE + (N)) -+#define GPIO_PIN_PE(N) (GPIO_PE_BASE + (N)) -+#define GPIO_PIN_PF(N) (GPIO_PF_BASE + (N)) -+#define GPIO_PIN_PX(N) (GPIO_PX_BASE + (N)) -+ -+#define gpio_decode_pin(s, bank, offset) \ -+ do { \ -+ switch (bank) { \ -+ case 7: \ -+ offset += 32; \ -+ /* fall through */ \ -+ case 6: \ -+ seq_printf(s, "PX%-2u", offset); \ -+ break; \ -+ default: \ -+ seq_printf(s, "P%c%-2u", bank + 'A', offset); \ -+ break; \ -+ } \ -+ } while (0) -+ -+/* HSB master IDs */ -+#define HMATRIX_MASTER_CPU_ICACHE 0 -+#define HMATRIX_MASTER_CPU_DCACHE 1 -+#define HMATRIX_MASTER_PDCA 2 -+#define HMATRIX_MASTER_LCDC 4 -+#define HMATRIX_MASTER_MPOP_IBI 5 -+#define HMATRIX_MASTER_MPOP_OBI 6 -+#define HMATRIX_MASTER_MPOP_OM 7 -+#define HMATRIX_MASTER_DMACA_M0 8 -+#define HMATRIX_MASTER_DMACA_M1 9 -+#define HMATRIX_MASTER_USBB 10 -+#define HMATRIX_MASTER_USBH_EHCI 11 -+#define HMATRIX_MASTER_USBH_OHCI 12 -+#define HMATRIX_MASTER_MACB 13 -+ -+/* HSB slave IDs */ -+#define HMATRIX_SLAVE_BOOTROM 0 -+#define HMATRIX_SLAVE_PBA 1 -+#define HMATRIX_SLAVE_PBB 2 -+#define HMATRIX_SLAVE_PBC 3 -+#define HMATRIX_SLAVE_SRAM0 4 -+#define HMATRIX_SLAVE_SRAM1 5 -+#define HMATRIX_SLAVE_EBI 6 -+#define HMATRIX_SLAVE_LCDC 7 -+#define HMATRIX_SLAVE_MPOP 8 -+#define HMATRIX_SLAVE_DMACA 9 -+#define HMATRIX_SLAVE_USBB 10 -+#define HMATRIX_SLAVE_EHCI 11 -+#define HMATRIX_SLAVE_OHCI 12 -+ -+/* Bits in HMATRIX SFR6 (EBI) */ -+#define HMATRIX_EBI_SDRAM_ENABLE (1 << 1) -+#define HMATRIX_EBI_NAND_ENABLE (1 << 3) -+#define HMATRIX_EBI_CF0_ENABLE (1 << 4) -+#define HMATRIX_EBI_CF1_ENABLE (1 << 5) -+ -+/* -+ * Base addresses of controllers that may be accessed early by -+ * platform code. -+ */ -+#define GPIO_HW_BASE 0xffd02000 -+#define INTC_BASE 0xffd00000 -+#define PM_BASE 0xffd00400 -+#define SDC_BASE 0xffd00800 -+#define SDRAMC_BASE 0xffe04800 -+#define HMATRIX_BASE 0xffe05000 -+ -+#endif /* __ASM_ARCH_AT32AP7200_H__ */ -diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h -index e60e907..85441ff 100644 ---- a/arch/avr32/mach-at32ap/include/mach/board.h -+++ b/arch/avr32/mach-at32ap/include/mach/board.h -@@ -14,8 +14,14 @@ - */ - extern unsigned long at32_board_osc_rates[]; - --/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */ --void at32_add_system_devices(void); -+/* -+ * This used to add essential system devices, but this is now done -+ * automatically. Please don't use it in new board code. -+ */ -+static inline void __deprecated at32_add_system_devices(void) -+{ -+ -+} - - #define ATMEL_MAX_UART 4 - extern struct platform_device *atmel_default_console_device; -@@ -43,12 +49,20 @@ struct atmel_lcdfb_info; - struct platform_device * - at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, - unsigned long fbmem_start, unsigned long fbmem_len, -- unsigned int pin_config); -+ u64 pin_mask); -+ -+ -+struct platform_device * -+at32_add_device_mpop(unsigned int id, struct platform_device *lcdc_pdev, -+ unsigned long fbmem_start, unsigned long fbmem_len); - - struct usba_platform_data; - struct platform_device * - at32_add_device_usba(unsigned int id, struct usba_platform_data *data); - -+struct platform_device *at32_add_device_ohci(unsigned int id); -+struct platform_device *at32_add_device_ehci(unsigned int id); -+ - struct ide_platform_data { - u8 cs; - }; -diff --git a/arch/avr32/mach-at32ap/include/mach/chip.h b/arch/avr32/mach-at32ap/include/mach/chip.h -index 5efca6d..09c0fe7 100644 ---- a/arch/avr32/mach-at32ap/include/mach/chip.h -+++ b/arch/avr32/mach-at32ap/include/mach/chip.h -@@ -12,6 +12,8 @@ - - #if defined(CONFIG_CPU_AT32AP700X) - # include <mach/at32ap700x.h> -+#elif defined(CONFIG_CPU_AT32AP720X) -+# include <mach/at32ap720x.h> - #else - # error Unknown chip type selected - #endif -diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h -index 44d0bfa..f4a5f26 100644 ---- a/arch/avr32/mach-at32ap/include/mach/cpu.h -+++ b/arch/avr32/mach-at32ap/include/mach/cpu.h -@@ -20,6 +20,19 @@ - # define cpu_is_at32ap7000() (0) - #endif - -+#ifdef CONFIG_CPU_AT32AP720X -+# define cpu_is_at32ap7200() (1) -+#else -+# define cpu_is_at32ap7200() (0) -+#endif -+ -+/* -+ * Unfortunately, only AP700x has a non-broken COUNT/COMPARE -+ * implementation. Other chips need to use different timers. The good -+ * news is that these timers are usually better anyway. -+ */ -+#define cpu_has_working_compare() (cpu_is_at32ap7000()) -+ - /* - * Since this is AVR32, we will never run on any AT91 CPU. But these - * definitions may reduce clutter in common drivers. -diff --git a/arch/avr32/mach-at32ap/include/mach/hmatrix.h b/arch/avr32/mach-at32ap/include/mach/hmatrix.h -index 7a368f2..8417737 100644 ---- a/arch/avr32/mach-at32ap/include/mach/hmatrix.h -+++ b/arch/avr32/mach-at32ap/include/mach/hmatrix.h -@@ -15,6 +15,9 @@ extern struct clk at32_hmatrix_clk; - void hmatrix_write_reg(unsigned long offset, u32 value); - u32 hmatrix_read_reg(unsigned long offset); - -+void hmatrix_set_default_master(unsigned int slave, unsigned int master); -+void hmatrix_set_priority(unsigned int slave, unsigned int master, -+ unsigned int priority); - void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask); - void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask); - -@@ -33,6 +36,7 @@ void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask); - # define HMATRIX_SCFG_DEFMSTR_NONE ( 0 << 16) /* No default master */ - # define HMATRIX_SCFG_DEFMSTR_LAST ( 1 << 16) /* Last def master */ - # define HMATRIX_SCFG_DEFMSTR_FIXED ( 2 << 16) /* Fixed def master */ -+# define HMATRIX_SCFG_DEFMSTR_MASK ( 3 << 16) - # define HMATRIX_SCFG_FIXED_DEFMSTR(m) ((m) << 18) /* Fixed master ID */ - # define HMATRIX_SCFG_ARBT_ROUND_ROBIN ( 0 << 24) /* RR arbitration */ - # define HMATRIX_SCFG_ARBT_FIXED_PRIO ( 1 << 24) /* Fixed priority */ -@@ -52,4 +56,12 @@ void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask); - /* Special Function Register. Bit definitions are chip-specific */ - #define HMATRIX_SFR(s) (0x0110 + 4 * (s)) - -+#define HMATRIX_MAX_SLAVE 15 -+#define HMATRIX_MAX_MASTER 15 -+#define HMATRIX_MAX_PRIO 15 -+ -+/* Special master IDs for use with hmatrix_set_default_master() */ -+#define HMATRIX_MASTER_NONE 16 /* No default master */ -+#define HMATRIX_MASTER_LAST 17 /* Last master stays connected */ -+ - #endif /* __HMATRIX_H */ -diff --git a/arch/avr32/mach-at32ap/include/mach/init.h b/arch/avr32/mach-at32ap/include/mach/init.h -index bc40e3d..66a6866 100644 ---- a/arch/avr32/mach-at32ap/include/mach/init.h -+++ b/arch/avr32/mach-at32ap/include/mach/init.h -@@ -15,4 +15,10 @@ void setup_board(void); - - void at32_setup_serial_console(unsigned int usart_id); - -+/* -+ * Called from time_init() when a broken COUNT/COMPARE implementation -+ * is detected. -+ */ -+void platform_time_init(void); -+ - #endif /* __ASM_AVR32_AT32AP_INIT_H__ */ -diff --git a/arch/avr32/mach-at32ap/include/mach/io.h b/arch/avr32/mach-at32ap/include/mach/io.h -index 4ec6abc..22ea79b 100644 ---- a/arch/avr32/mach-at32ap/include/mach/io.h -+++ b/arch/avr32/mach-at32ap/include/mach/io.h -@@ -1,8 +1,7 @@ - #ifndef __ASM_AVR32_ARCH_AT32AP_IO_H - #define __ASM_AVR32_ARCH_AT32AP_IO_H - --/* For "bizarre" halfword swapping */ --#include <linux/byteorder/swabb.h> -+#include <linux/swab.h> - - #if defined(CONFIG_AP700X_32_BIT_SMC) - # define __swizzle_addr_b(addr) (addr ^ 3UL) -diff --git a/arch/avr32/mach-at32ap/include/mach/irq.h b/arch/avr32/mach-at32ap/include/mach/irq.h -index 608e350..21f37f3 100644 ---- a/arch/avr32/mach-at32ap/include/mach/irq.h -+++ b/arch/avr32/mach-at32ap/include/mach/irq.h -@@ -6,7 +6,7 @@ - #define AT32_EXTINT(n) (EIM_IRQ_BASE + (n)) - - #define GPIO_IRQ_BASE (EIM_IRQ_BASE + NR_EIM_IRQS) --#define NR_GPIO_CTLR (5 /*internal*/ + 1 /*external*/) -+#define NR_GPIO_CTLR (8 /*internal*/ + 1 /*external*/) - #define NR_GPIO_IRQS (NR_GPIO_CTLR * 32) - - #define NR_IRQS (GPIO_IRQ_BASE + NR_GPIO_IRQS) -diff --git a/arch/avr32/mach-at32ap/include/mach/pm.h b/arch/avr32/mach-at32ap/include/mach/pm.h -index 979b355..3f65ab1 100644 ---- a/arch/avr32/mach-at32ap/include/mach/pm.h -+++ b/arch/avr32/mach-at32ap/include/mach/pm.h -@@ -11,13 +11,17 @@ - #define __ASM_AVR32_ARCH_PM_H - - /* Possible arguments to the "sleep" instruction */ --#define CPU_SLEEP_IDLE 0 --#define CPU_SLEEP_FROZEN 1 --#define CPU_SLEEP_STANDBY 2 --#define CPU_SLEEP_STOP 3 --#define CPU_SLEEP_STATIC 5 -+#define CPU_SLEEP_IDLE 0x00 -+#define CPU_SLEEP_FROZEN 0x01 -+#define CPU_SLEEP_STANDBY 0x02 -+#define CPU_SLEEP_STOP 0x03 -+#define CPU_SLEEP_DEEPSTOP 0x04 /* Not valid on AP700x */ -+#define CPU_SLEEP_STATIC 0x05 -+#define CPU_SLEEP_SHUTDOWN 0x06 /* Not valid on AP700x */ -+#define CPU_SLEEP_UNMASK_IRQ 0x80 /* Not valid on AP700x */ - - #ifndef __ASSEMBLY__ -+#if defined(CONFIG_CPU_AT32AP700X) - extern void cpu_enter_idle(void); - extern void cpu_enter_standby(unsigned long sdramc_base); - -@@ -37,15 +41,57 @@ static inline void cpu_idle_sleep(void) - { - /* - * If we're using the COUNT and COMPARE registers for -- * timekeeping, we can't use the IDLE state. -+ * timekeeping on AP7000, we can't use the IDLE state. - */ - if (disable_idle_sleep) - cpu_relax(); - else - cpu_enter_idle(); - } -+#else -+static inline void cpu_disable_idle_sleep(void) -+{ -+ -+} -+ -+static inline void cpu_enable_idle_sleep(void) -+{ -+ -+} -+ -+static inline void cpu_enter_idle(void) -+{ -+ /* Enable interrupts and sleep */ -+ asm volatile("sleep %0" -+ : -+ : "i"(CPU_SLEEP_IDLE | CPU_SLEEP_UNMASK_IRQ) -+ : "memory"); -+} -+ -+static inline void cpu_idle_sleep(void) -+{ -+ local_irq_disable(); -+ if (!test_thread_flag(TIF_NEED_RESCHED)) -+ cpu_enter_idle(); -+ local_irq_enable(); -+} -+#endif - - void intc_set_suspend_handler(unsigned long offset); -+ -+extern unsigned long at32_get_reset_cause(void); -+ - #endif - -+#define AT32_RCAUSE_POR (1 << 0) /* Power-On Reset */ -+#define AT32_RCAUSE_BOD (1 << 1) /* Brown-Out Detected */ -+#define AT32_RCAUSE_EXT (1 << 2) /* External Reset */ -+#define AT32_RCAUSE_WDT (1 << 3) /* Watchdog Timeout */ -+#define AT32_RCAUSE_JTAG (1 << 4) /* JTAG Reset */ -+#define AT32_RCAUSE_NTAE (1 << 5) /* NanoTrace Access Error */ -+#define AT32_RCAUSE_SLEEP (1 << 6) /* Shutdown or Static mode */ -+#define AT32_RCAUSE_CPUERR (1 << 7) /* CPU Error */ -+#define AT32_RCAUSE_OCDRST (1 << 8) /* OCD Reset */ -+#define AT32_RCAUSE_JTAGHARD (1 << 9) /* JTAG Hard Reset */ -+ - #endif /* __ASM_AVR32_ARCH_PM_H */ -diff --git a/arch/avr32/mach-at32ap/include/mach/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h -index b1abe6b..4873024 100644 ---- a/arch/avr32/mach-at32ap/include/mach/portmux.h -+++ b/arch/avr32/mach-at32ap/include/mach/portmux.h -@@ -21,9 +21,10 @@ - #define AT32_GPIOF_DEGLITCH 0x00000008 /* (IN) Filter glitches */ - #define AT32_GPIOF_MULTIDRV 0x00000010 /* Enable multidriver option */ - --void at32_select_periph(unsigned int pin, unsigned int periph, -- unsigned long flags); -+void at32_select_periph(unsigned int port, unsigned int pin, -+ unsigned int periph, unsigned long flags); - void at32_select_gpio(unsigned int pin, unsigned long flags); --void at32_reserve_pin(unsigned int pin); -+void at32_deselect_pin(unsigned int pin); -+void at32_reserve_pin(unsigned int port, u32 pin_mask); - - #endif /* __ASM_ARCH_PORTMUX_H__ */ -diff --git a/arch/avr32/mach-at32ap/pdc.c b/arch/avr32/mach-at32ap/pdc.c -index 1040bda..61ab15a 100644 ---- a/arch/avr32/mach-at32ap/pdc.c -+++ b/arch/avr32/mach-at32ap/pdc.c -@@ -35,7 +35,6 @@ static int __init pdc_probe(struct platform_device *pdev) - } - - static struct platform_driver pdc_driver = { -- .probe = pdc_probe, - .driver = { - .name = "pdc", - }, -@@ -43,6 +42,6 @@ static struct platform_driver pdc_driver = { - - static int __init pdc_init(void) - { -- return platform_driver_register(&pdc_driver); -+ return platform_driver_probe(&pdc_driver, pdc_probe); - } - arch_initcall(pdc_init); -diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c -index 405ee6b..09a274c 100644 ---- a/arch/avr32/mach-at32ap/pio.c -+++ b/arch/avr32/mach-at32ap/pio.c -@@ -50,35 +50,48 @@ static struct pio_device *gpio_to_pio(unsigned int gpio) - } - - /* Pin multiplexing API */ -+static DEFINE_SPINLOCK(pio_lock); - --void __init at32_select_periph(unsigned int pin, unsigned int periph, -- unsigned long flags) -+void __init at32_select_periph(unsigned int port, u32 pin_mask, -+ unsigned int periph, unsigned long flags) - { - struct pio_device *pio; -- unsigned int pin_index = pin & 0x1f; -- u32 mask = 1 << pin_index; - -- pio = gpio_to_pio(pin); -+ /* assign and verify pio */ -+ pio = gpio_to_pio(port); - if (unlikely(!pio)) { -- printk("pio: invalid pin %u\n", pin); -+ printk(KERN_WARNING "pio: invalid port %u\n", port); - goto fail; - } - -- if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask) -- || gpiochip_is_requested(&pio->chip, pin_index))) { -- printk("%s: pin %u is busy\n", pio->name, pin_index); -+ /* Test if any of the requested pins is already muxed */ -+ spin_lock(&pio_lock); -+ if (unlikely(pio->pinmux_mask & pin_mask)) { -+ printk(KERN_WARNING "%s: pin(s) busy (requested 0x%x, busy 0x%x)\n", -+ pio->name, pin_mask, pio->pinmux_mask & pin_mask); -+ spin_unlock(&pio_lock); - goto fail; - } - -- pio_writel(pio, PUER, mask); -+ pio->pinmux_mask |= pin_mask; -+ -+ /* enable pull ups */ -+ pio_writel(pio, PUER, pin_mask); -+ -+ /* select either peripheral A or B */ - if (periph) -- pio_writel(pio, BSR, mask); -+ pio_writel(pio, BSR, pin_mask); - else -- pio_writel(pio, ASR, mask); -+ pio_writel(pio, ASR, pin_mask); - -- pio_writel(pio, PDR, mask); -+ /* enable peripheral control */ -+ pio_writel(pio, PDR, pin_mask); -+ -+ /* Disable pull ups if not requested. */ - if (!(flags & AT32_GPIOF_PULLUP)) -- pio_writel(pio, PUDR, mask); -+ pio_writel(pio, PUDR, pin_mask); -+ -+ spin_unlock(&pio_lock); - - return; - -@@ -134,8 +147,11 @@ fail: - dump_stack(); - } - --/* Reserve a pin, preventing anyone else from changing its configuration. */ --void __init at32_reserve_pin(unsigned int pin) -+/* -+ * Undo a previous pin reservation. Will not affect the hardware -+ * configuration. -+ */ -+void at32_deselect_pin(unsigned int pin) - { - struct pio_device *pio; - unsigned int pin_index = pin & 0x1f; -@@ -143,14 +159,37 @@ void __init at32_reserve_pin(unsigned int pin) - pio = gpio_to_pio(pin); - if (unlikely(!pio)) { - printk("pio: invalid pin %u\n", pin); -+ dump_stack(); -+ return; -+ } -+ -+ clear_bit(pin_index, &pio->pinmux_mask); -+} -+ -+/* Reserve a pin, preventing anyone else from changing its configuration. */ -+void __init at32_reserve_pin(unsigned int port, u32 pin_mask) -+{ -+ struct pio_device *pio; -+ -+ /* assign and verify pio */ -+ pio = gpio_to_pio(port); -+ if (unlikely(!pio)) { -+ printk(KERN_WARNING "pio: invalid port %u\n", port); - goto fail; - } - -- if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) { -- printk("%s: pin %u is busy\n", pio->name, pin_index); -+ /* Test if any of the requested pins is already muxed */ -+ spin_lock(&pio_lock); -+ if (unlikely(pio->pinmux_mask & pin_mask)) { -+ printk(KERN_WARNING "%s: pin(s) busy (req. 0x%x, busy 0x%x)\n", -+ pio->name, pin_mask, pio->pinmux_mask & pin_mask); -+ spin_unlock(&pio_lock); - goto fail; - } - -+ /* Reserve pins */ -+ pio->pinmux_mask |= pin_mask; -+ spin_unlock(&pio_lock); - return; - - fail: -@@ -382,7 +421,6 @@ static int __init pio_probe(struct platform_device *pdev) - } - - static struct platform_driver pio_driver = { -- .probe = pio_probe, - .driver = { - .name = "pio", - }, -@@ -390,7 +428,7 @@ static struct platform_driver pio_driver = { - - static int __init pio_init(void) - { -- return platform_driver_register(&pio_driver); -+ return platform_driver_probe(&pio_driver, pio_probe); - } - postcore_initcall(pio_init); - -diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S -index 17503b0..3d210f8 100644 ---- a/arch/avr32/mach-at32ap/pm-at32ap700x.S -+++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S -@@ -12,12 +12,9 @@ - #include <asm/thread_info.h> - #include <mach/pm.h> - --#include "pm.h" -+#include "pm-v1.h" - #include "sdramc.h" - --/* Same as 0xfff00000 but fits in a 21 bit signed immediate */ --#define PM_BASE -0x100000 -- - .section .bss, "wa", @nobits - .global disable_idle_sleep - .type disable_idle_sleep, @object -diff --git a/arch/avr32/mach-at32ap/pm-at32ap720x.S b/arch/avr32/mach-at32ap/pm-at32ap720x.S -new file mode 100644 -index 0000000..a765aa5 ---- /dev/null -+++ b/arch/avr32/mach-at32ap/pm-at32ap720x.S -@@ -0,0 +1,110 @@ -+/* -+ * Low-level Power Management code. -+ * -+ * Copyright (C) 2008 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include <asm/asm.h> -+#include <asm/asm-offsets.h> -+#include <asm/thread_info.h> -+#include <mach/pm.h> -+ -+#include "pm-v3.h" -+#include "sdramc.h" -+ -+#ifdef CONFIG_PM -+ .section .init.text, "ax", @progbits -+ -+ .global pm_exception -+ .type pm_exception, @function -+pm_exception: -+ /* -+ * Exceptions are masked when we switch to this handler, so -+ * we'll only get "unrecoverable" exceptions (offset 0.) -+ */ -+ sub r12, pc, . - .Lpanic_msg -+ lddpc pc, .Lpanic_addr -+ -+ .align 2 -+.Lpanic_addr: -+ .long panic -+.Lpanic_msg: -+ .asciz "Unrecoverable exception during suspend\n" -+ .size pm_exception, . - pm_exception -+ -+ .global pm_irq0 -+ .type pm_irq0, @function -+pm_irq0: -+ /* Disable interrupts and return after the sleep instruction */ -+ mfsr r9, SYSREG_RSR_INT0 -+ mtsr SYSREG_RAR_INT0, r8 -+ sbr r9, SYSREG_GM_OFFSET -+ mtsr SYSREG_RSR_INT0, r9 -+ rete -+ -+ /* -+ * void cpu_enter_standby(unsigned long sdramc_base) -+ * -+ * Enter PM_SUSPEND_STANDBY mode. At this point, all drivers -+ * are suspended and interrupts are disabled. Interrupts -+ * marked as 'wakeup' event sources may still come along and -+ * get us out of here. -+ * -+ * The SDRAM will be put into self-refresh mode (which does -+ * not require a clock from the CPU), and the CPU will be put -+ * into "frozen" mode (HSB bus stopped). The SDRAM controller -+ * will automatically bring the SDRAM into normal mode on the -+ * first access, and the power manager will automatically -+ * start the HSB and CPU clocks upon a wakeup event. -+ */ -+ .global pm_standby -+ .type pm_standby, @function -+pm_standby: -+ /* -+ * interrupts are already masked at this point, and EVBA -+ * points to pm_exception above. -+ */ -+ ld.w r10, r12[SDRAMC_LPR] -+ sub r8, pc, . - 1f /* return address for irq handler */ -+ mov r11, SDRAMC_LPR_LPCB_SELF_RFR -+ bfins r10, r11, 0, 2 /* LPCB <- self Refresh */ -+ sync 0 /* flush write buffer */ -+ st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */ -+ ld.w r11, r12[SDRAMC_LPR] -+ sleep CPU_SLEEP_FROZEN | CPU_SLEEP_UNMASK_IRQ -+1: mask_interrupts -+ retal r12 -+ .size pm_standby, . - pm_standby -+ -+ .global pm_suspend_to_ram -+ .type pm_suspend_to_ram, @function -+pm_suspend_to_ram: -+ /* -+ * interrupts are already masked at this point, and EVBA -+ * points to pm_exception above. -+ */ -+ mov r11, 0 -+ cache r11[2], 8 /* clean all dcache lines */ -+ sync 0 /* flush write buffer */ -+ ld.w r10, r12[SDRAMC_LPR] -+ sub r8, pc, . - 1f /* return address for irq handler */ -+ mov r11, SDRAMC_LPR_LPCB_SELF_RFR -+ bfins r10, r11, 0, 2 /* LPCB <- self refresh */ -+ st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */ -+ ld.w r11, r12[SDRAMC_LPR] -+ -+ sleep CPU_SLEEP_STOP | CPU_SLEEP_UNMASK_IRQ -+1: mask_interrupts -+ -+ retal r12 -+ .size pm_suspend_to_ram, . - pm_suspend_to_ram -+ -+ .global pm_sram_end -+ .type pm_sram_end, @function -+pm_sram_end: -+ .size pm_sram_end, 0 -+ -+#endif /* CONFIG_PM */ -diff --git a/arch/avr32/mach-at32ap/pm-v1.h b/arch/avr32/mach-at32ap/pm-v1.h -new file mode 100644 -index 0000000..532a373 ---- /dev/null -+++ b/arch/avr32/mach-at32ap/pm-v1.h -@@ -0,0 +1,112 @@ -+/* -+ * Register definitions for the Power Manager (PM) -+ */ -+#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__ -+#define __ARCH_AVR32_MACH_AT32AP_PM_H__ -+ -+/* PM register offsets */ -+#define PM_MCCTRL 0x0000 -+#define PM_CKSEL 0x0004 -+#define PM_CPU_MASK 0x0008 -+#define PM_HSB_MASK 0x000c -+#define PM_PBA_MASK 0x0010 -+#define PM_PBB_MASK 0x0014 -+#define PM_PLL0 0x0020 -+#define PM_PLL1 0x0024 -+#define PM_IER 0x0040 -+#define PM_IDR 0x0044 -+#define PM_IMR 0x0048 -+#define PM_ISR 0x004c -+#define PM_ICR 0x0050 -+#define PM_GCCTRL(x) (0x0060 + 4 * (x)) -+#define PM_RCAUSE 0x00c0 -+ -+/* Bitfields in CKSEL */ -+#define PM_CPUSEL_OFFSET 0 -+#define PM_CPUSEL_SIZE 3 -+#define PM_CPUDIV_OFFSET 7 -+#define PM_CPUDIV_SIZE 1 -+#define PM_HSBSEL_OFFSET 8 -+#define PM_HSBSEL_SIZE 3 -+#define PM_HSBDIV_OFFSET 15 -+#define PM_HSBDIV_SIZE 1 -+#define PM_PBASEL_OFFSET 16 -+#define PM_PBASEL_SIZE 3 -+#define PM_PBADIV_OFFSET 23 -+#define PM_PBADIV_SIZE 1 -+#define PM_PBBSEL_OFFSET 24 -+#define PM_PBBSEL_SIZE 3 -+#define PM_PBBDIV_OFFSET 31 -+#define PM_PBBDIV_SIZE 1 -+ -+/* Bitfields in PLL0 */ -+#define PM_PLLEN_OFFSET 0 -+#define PM_PLLEN_SIZE 1 -+#define PM_PLLOSC_OFFSET 1 -+#define PM_PLLOSC_SIZE 1 -+#define PM_PLLOPT_OFFSET 2 -+#define PM_PLLOPT_SIZE 3 -+#define PM_PLLDIV_OFFSET 8 -+#define PM_PLLDIV_SIZE 8 -+#define PM_PLLMUL_OFFSET 16 -+#define PM_PLLMUL_SIZE 8 -+#define PM_PLLCOUNT_OFFSET 24 -+#define PM_PLLCOUNT_SIZE 6 -+#define PM_PLLTEST_OFFSET 31 -+#define PM_PLLTEST_SIZE 1 -+ -+/* Bitfields in ICR */ -+#define PM_LOCK0_OFFSET 0 -+#define PM_LOCK0_SIZE 1 -+#define PM_LOCK1_OFFSET 1 -+#define PM_LOCK1_SIZE 1 -+#define PM_WAKE_OFFSET 2 -+#define PM_WAKE_SIZE 1 -+#define PM_CKRDY_OFFSET 5 -+#define PM_CKRDY_SIZE 1 -+#define PM_MSKRDY_OFFSET 6 -+#define PM_MSKRDY_SIZE 1 -+ -+/* Bitfields in GCCTRL0 */ -+#define PM_OSCSEL_OFFSET 0 -+#define PM_OSCSEL_SIZE 1 -+#define PM_PLLSEL_OFFSET 1 -+#define PM_PLLSEL_SIZE 1 -+#define PM_CEN_OFFSET 2 -+#define PM_CEN_SIZE 1 -+#define PM_DIVEN_OFFSET 4 -+#define PM_DIVEN_SIZE 1 -+#define PM_DIV_OFFSET 8 -+#define PM_DIV_SIZE 8 -+ -+/* Bitfields in RCAUSE */ -+#define PM_POR_OFFSET 0 -+#define PM_POR_SIZE 1 -+#define PM_EXT_OFFSET 2 -+#define PM_EXT_SIZE 1 -+#define PM_WDT_OFFSET 3 -+#define PM_WDT_SIZE 1 -+#define PM_NTAE_OFFSET 4 -+#define PM_NTAE_SIZE 1 -+ -+/* Bit manipulation macros */ -+#define PM_BIT(name) \ -+ (1 << PM_##name##_OFFSET) -+#define PM_BF(name,value) \ -+ (((value) & ((1 << PM_##name##_SIZE) - 1)) \ -+ << PM_##name##_OFFSET) -+#define PM_BFEXT(name,value) \ -+ (((value) >> PM_##name##_OFFSET) \ -+ & ((1 << PM_##name##_SIZE) - 1)) -+#define PM_BFINS(name,value,old)\ -+ (((old) & ~(((1 << PM_##name##_SIZE) - 1) \ -+ << PM_##name##_OFFSET)) \ -+ | PM_BF(name,value)) -+ -+/* Register access macros */ -+#define pm_readl(reg) \ -+ __raw_readl((void __iomem __force *)PM_BASE + PM_##reg) -+#define pm_writel(reg,value) \ -+ __raw_writel((value), (void __iomem __force *)PM_BASE + PM_##reg) -+ -+#endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */ -diff --git a/arch/avr32/mach-at32ap/pm-v3.h b/arch/avr32/mach-at32ap/pm-v3.h -new file mode 100644 -index 0000000..3c507b9 ---- /dev/null -+++ b/arch/avr32/mach-at32ap/pm-v3.h -@@ -0,0 +1,283 @@ -+/* -+ * Copyright (C) 2008 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#ifndef __PM_V3_H__ -+#define __PM_V3_H__ -+ -+#include <mach/chip.h> -+ -+/* PM Register offsets */ -+#ifndef __ASSEMBLY__ -+struct pm_regs { -+ u32 MCCTRL; /* Main Clock Control */ -+ u32 CKSEL; /* Clock Select */ -+ u32 CPUMASK; /* CPU Clock Mask */ -+ u32 HSBMASK; /* HSB Clock Mask */ -+ u32 PBAMASK; /* PBA Clock Mask */ -+ u32 PBBMASK; /* PBB Clock Mask */ -+ u32 PBADIVMASK; /* Divided PBA Clock Mask */ -+ u32 PBBDIVMASK; /* Divided PBB Clock Mask */ -+ u32 __reserved1[8]; -+ u32 PLL[3]; /* PLL Control */ -+ u32 __reserved2[13]; -+ u32 OSCCTRL[3]; /* Oscillator Control */ -+ u32 __reserved3[5]; -+ u32 OSCCTRL32; /* 32 kHz Oscillator Control */ -+ u32 __reserved4[7]; -+ u32 IER; /* Interrupt Enable */ -+ u32 IDR; /* Interrupt Disable */ -+ u32 IMR; /* Interrupt Mask */ -+ u32 ISR; /* Interrupt Status */ -+ u32 ICR; /* Interrupt Clear */ -+ u32 POSCSR; /* Power and Oscillator Status */ -+ u32 __reserved5[10]; -+ u32 GCCTRL[8]; /* Generic Clock Control */ -+ u32 __reserved6[8]; -+ u32 RCCR; /* RC Oscillator Calibration */ -+ u32 BGCR; /* Bandgap Calibration */ -+ u32 VREGCR; /* Buck Regulator Calibration */ -+ u32 BOD; /* BOD Level */ -+ u32 PPCR; /* Peripheral Power Control */ -+ u32 __reserved7[11]; -+ u32 RCAUSE; /* Reset Cause */ -+ u32 WCAUSE; /* Wake Cause */ -+ u32 AWEN; /* Asynchronous Wake Enable */ -+ u32 __reserved8[14]; -+ u32 GPLP; /* General Purpose Low-Power */ -+}; -+#endif -+ -+/* Assembly-friendly register offsets; same as above */ -+#define PM_MCCTRL 0x0000 -+#define PM_CKSEL 0x0004 -+#define PM_CPUMASK 0x0008 -+#define PM_HSBMASK 0x000c -+#define PM_PBAMASK 0x0010 -+#define PM_PBBMASK 0x0014 -+#define PM_PBADIVMASK 0x0018 -+#define PM_PBBDIVMASK 0x001c -+#define PM_PLL0 0x0040 -+#define PM_PLL1 0x0044 -+#define PM_PLL2 0x0048 -+#define PM_OSCCTRL0 0x0080 -+#define PM_OSCCTRL1 0x0084 -+#define PM_OSCCTRL2 0x0088 -+#define PM_OSCCTRL32 0x00a0 -+#define PM_IER 0x00c0 -+#define PM_IDR 0x00c4 -+#define PM_IMR 0x00c8 -+#define PM_ISR 0x00cc -+#define PM_ICR 0x00d0 -+#define PM_POSCSR 0x00d4 -+#define PM_GCCTRL 0x0100 -+#define PM_RCCR 0x0140 -+#define PM_BGCR 0x0144 -+#define PM_VREGCR 0x0148 -+#define PM_BOD 0x014c -+#define PM_PPCR 0x0150 -+#define PM_RC_RCAUSE 0x0180 -+#define PM_WCAUSE 0x0184 -+#define PM_AWEN 0x0188 -+#define PM_GPLP 0x01c0 -+ -+/* Bits in MCCTRL */ -+#define PM_MCCTRL_MCSEL_START 0 -+#define PM_MCCTRL_MCSEL_SIZE 2 -+#define PM_MCCTRL_OSC0EN_BIT 2 -+#define PM_MCCTRL_OSC1EN_BIT 3 -+#define PM_MCCTRL_OSC2EN_BIT 4 -+#define PM_MCCTRL_CRIPEL_BIT 24 -+ -+/* Bits in CKSEL */ -+#define PM_CKSEL_CPUSEL_START 0 -+#define PM_CKSEL_CPUSEL_SIZE 3 -+#define PM_CKSEL_CPUDIV_BIT 7 -+#define PM_CKSEL_HSBSEL_START 8 -+#define PM_CKSEL_HSBSEL_SIZE 3 -+#define PM_CKSEL_HSBDIV_BIT 15 -+#define PM_CKSEL_PBASEL_START 16 -+#define PM_CKSEL_PBASEL_SIZE 3 -+#define PM_CKSEL_PBADIV_BIT 23 -+#define PM_CKSEL_PBBSEL_START 24 -+#define PM_CKSEL_PBBSEL_SIZE 3 -+#define PM_CKSEL_PBBDIV_BIT 31 -+ -+/* Bits in CPUMASK */ -+#define PM_CPUMASK_SYSTIMER_BIT 16 -+ -+/* Bits in PLLx */ -+#define PM_PLLx_PLLEN_BIT 0 -+#define PM_PLLx_PLLOSC_START 1 -+#define PM_PLLx_PLLOSC_SIZE 2 -+#define PM_PLLx_PLLOPT_START 3 -+#define PM_PLLx_PLLOPT_SIZE 3 -+#define PM_PLLx_PLLBPL_BIT 7 -+#define PM_PLLx_PLLDIV_START 8 -+#define PM_PLLx_PLLDIV_SIZE 6 -+#define PM_PLLx_PLLMUL_START 16 -+#define PM_PLLx_PLLMUL_SIZE 6 -+#define PM_PLLx_PLLCOUNT_START 24 -+#define PM_PLLx_PLLCOUNT_SIZE 6 -+#define PM_PLLx_PLLIOTESTEN_BIT 30 -+#define PM_PLLx_PLLTEST_BIT 31 -+ -+/* Bits in OSCCTRLx */ -+#define PM_OSCCTRLx_MODE_START 0 -+#define PM_OSCCTRLx_MODE_SIZE 4 -+#define PM_OSCCTRLx_STARTUP_START 8 -+#define PM_OSCCTRLx_STARTUP_SIZE 3 -+ -+/* Bits in OSCCTRL32 */ -+#define PM_OSCCTRL32_OSC32EN_BIT 0 -+#define PM_OSCCTRL32_MODE_START 8 -+#define PM_OSCCTRL32_MODE_SIZE 3 -+#define PM_OSCCTRL32_STARTUP_START 16 -+#define PM_OSCCTRL32_STARTUP_SIZE 3 -+ -+/* Bits in IER/IDR/IMR/ISR/ICR */ -+#define PM_ISR_OSC0RDY_BIT 0 -+#define PM_ISR_OSC1RDY_BIT 1 -+#define PM_ISR_OSC2RDY_BIT 2 -+#define PM_ISR_OSC32RDY_BIT 7 -+#define PM_ISR_LOCK0_BIT 8 -+#define PM_ISR_LOCK1_BIT 9 -+#define PM_ISR_LOCK2_BIT 10 -+#define PM_ISR_LOCK0LOST_BIT 16 -+#define PM_ISR_LOCK1LOST_BIT 17 -+#define PM_ISR_LOCK2LOST_BIT 18 -+#define PM_ISR_CKRDY_BIT 24 -+#define PM_ISR_MSKRDY_BIT 25 -+#define PM_ISR_WAKE_BIT 26 -+#define PM_ISR_BODDET_BIT 27 -+#define PM_ISR_PERRDY_BIT 28 -+ -+/* Bits in POSCSR */ -+#define PM_POSCSR_OSC0RDY_BIT 0 -+#define PM_POSCSR_OSC1RDY_BIT 1 -+#define PM_POSCSR_OSC32RDY_BIT 7 -+#define PM_POSCSR_LOCK0_BIT 8 -+#define PM_POSCSR_LOCK1_BIT 9 -+#define PM_POSCSR_LOCK0LOST_BIT 16 -+#define PM_POSCSR_LOCK1LOST_BIT 17 -+#define PM_POSCSR_CKRDY_BIT 24 -+#define PM_POSCSR_MSKRDY_BIT 25 -+#define PM_POSCSR_WAKE_BIT 26 -+#define PM_POSCSR_BODDET_BIT 27 -+#define PM_POSCSR_PERRDY_BIT 28 -+ -+/* Bits in GCCTRL */ -+#define PM_GCCTRL_CEN_BIT 0 -+#define PM_GCCTRL_DIVEN_BIT 1 -+#define PM_GCCTRL_OSCSEL_START 8 -+#define PM_GCCTRL_OSCSEL_SIZE 4 -+#define PM_GCCTRL_DIV_START 16 -+#define PM_GCCTRL_DIV_SIZE 8 -+ -+/* Bits in RCCR */ -+#define PM_RCCR_CALIB_START 0 -+#define PM_RCCR_CALIB_SIZE 10 -+#define PM_RCCR_FCD_BIT 16 -+#define PM_RCCR_KEY_START 24 -+#define PM_RCCR_KEY_SIZE 8 -+ -+/* Bits in BGCR */ -+#define PM_BGCR_CALIB_START 0 -+#define PM_BGCR_CALIB_SIZE 3 -+#define PM_BGCR_FCD_BIT 16 -+#define PM_BGCR_KEY_START 24 -+#define PM_BGCR_KEY_SIZE 8 -+ -+/* Bits in VREGCR */ -+#define PM_VREGCR_CALIB_START 0 -+#define PM_VREGCR_CALIB_SIZE 3 -+#define PM_VREGCR_FCD_BIT 16 -+#define PM_VREGCR_KEY_START 24 -+#define PM_VREGCR_KEY_SIZE 8 -+ -+/* Bits in BOD */ -+#define PM_BOD_LEVEL_START 0 -+#define PM_BOD_LEVEL_SIZE 6 -+#define PM_BOD_HYST_BIT 6 -+#define PM_BOD_CTRL_START 8 -+#define PM_BOD_CTRL_SIZE 2 -+#define PM_BOD_FCD_BIT 16 -+#define PM_BOD_KEY_START 24 -+#define PM_BOD_KEY_SIZE 8 -+ -+/* Bits in PPCR */ -+#define PM_PPCR_EBI_VOLT_BIT 0 -+#define PM_PPCR_UTMI_CTRL_BIT 1 -+#define PM_PPCR_KEY_START 24 -+#define PM_PPCR_KEY_SIZE 8 -+ -+/* Bits in RC_RCAUSE */ -+#define PM_RC_RCAUSE_POR_BIT 0 -+#define PM_RC_RCAUSE_BOD_BIT 1 -+#define PM_RC_RCAUSE_EXT_BIT 2 -+#define PM_RC_RCAUSE_WDT_BIT 3 -+#define PM_RC_RCAUSE_JTAG_BIT 4 -+#define PM_RC_RCAUSE_NTAE_BIT 5 -+#define PM_RC_RCAUSE_SLEEP_BIT 6 -+#define PM_RC_RCAUSE_CPUERR_BIT 7 -+#define PM_RC_RCAUSE_OCDRST_BIT 8 -+#define PM_RC_RCAUSE_JTAGHARD_BIT 9 -+ -+/* Bits in WCAUSE */ -+#define PM_WCAUSE_PERIPH0_BIT 0 -+#define PM_WCAUSE_PERIPH1_BIT 1 -+#define PM_WCAUSE_EIC_BIT 16 -+#define PM_WCAUSE_RTC_BIT 17 -+ -+/* Constants for MCCTRL:MCSEL */ -+#define PM_MCSEL_SLOW 0 -+#define PM_MCSEL_OSC0 1 -+#define PM_MCSEL_PLL0 2 -+ -+/* Constants for OSCCTRLx:MODE */ -+#define PM_MODE_EXT_CLOCK 0 -+#define PM_MODE_CRYSTAL_ACG 1 -+#define PM_MODE_CRYSTAL_G0 4 -+#define PM_MODE_CRYSTAL_G1 5 -+#define PM_MODE_CRYSTAL_G2 6 -+#define PM_MODE_CRYSTAL_G3 7 -+ -+/* Constants for GCCTRL:OSCSEL */ -+#define PM_OSCSEL_SLOW 0 -+#define PM_OSCSEL_CLK32 1 -+#define PM_OSCSEL_OSC0 2 -+#define PM_OSCSEL_OSC1 3 -+#define PM_OSCSEL_PLL0 4 -+#define PM_OSCSEL_PLL1 5 -+ -+/* Constants for BOD:CTRL */ -+#define PM_CTRL_OFF1 0 -+#define PM_CTRL_ENABLED 1 -+#define PM_CTRL_ENABLED_NORESET 2 -+#define PM_CTRL_OFF2 3 -+ -+/* Bit manipulation macros */ -+#define PM_BIT(name) \ -+ (1 << PM_##name##_BIT) -+#define PM_BF(name,value) \ -+ (((value) & ((1 << PM_##name##_SIZE) - 1)) \ -+ << PM_##name##_START) -+#define PM_BFEXT(name,value) \ -+ (((value) >> PM_##name##_START) \ -+ & ((1 << PM_##name##_SIZE) - 1)) -+#define PM_BFINS(name,value,old) \ -+ (((old) & ~(((1 << PM_##name##_SIZE) - 1) \ -+ << PM_##name##_START)) \ -+ | PM_BF(name,value)) -+ -+/* Register access macros */ -+#define __pm_regs ((struct pm_regs __iomem __force *)PM_BASE) -+#define pm_readl(reg) \ -+ __raw_readl(&__pm_regs->reg) -+#define pm_writel(reg, value) \ -+ __raw_writel(value, &__pm_regs->reg) -+ -+#endif /* __PM_V3_H__ */ -diff --git a/arch/avr32/mach-at32ap/pm.h b/arch/avr32/mach-at32ap/pm.h -deleted file mode 100644 -index 532a373..0000000 ---- a/arch/avr32/mach-at32ap/pm.h -+++ /dev/null -@@ -1,112 +0,0 @@ --/* -- * Register definitions for the Power Manager (PM) -- */ --#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__ --#define __ARCH_AVR32_MACH_AT32AP_PM_H__ -- --/* PM register offsets */ --#define PM_MCCTRL 0x0000 --#define PM_CKSEL 0x0004 --#define PM_CPU_MASK 0x0008 --#define PM_HSB_MASK 0x000c --#define PM_PBA_MASK 0x0010 --#define PM_PBB_MASK 0x0014 --#define PM_PLL0 0x0020 --#define PM_PLL1 0x0024 --#define PM_IER 0x0040 --#define PM_IDR 0x0044 --#define PM_IMR 0x0048 --#define PM_ISR 0x004c --#define PM_ICR 0x0050 --#define PM_GCCTRL(x) (0x0060 + 4 * (x)) --#define PM_RCAUSE 0x00c0 -- --/* Bitfields in CKSEL */ --#define PM_CPUSEL_OFFSET 0 --#define PM_CPUSEL_SIZE 3 --#define PM_CPUDIV_OFFSET 7 --#define PM_CPUDIV_SIZE 1 --#define PM_HSBSEL_OFFSET 8 --#define PM_HSBSEL_SIZE 3 --#define PM_HSBDIV_OFFSET 15 --#define PM_HSBDIV_SIZE 1 --#define PM_PBASEL_OFFSET 16 --#define PM_PBASEL_SIZE 3 --#define PM_PBADIV_OFFSET 23 --#define PM_PBADIV_SIZE 1 --#define PM_PBBSEL_OFFSET 24 --#define PM_PBBSEL_SIZE 3 --#define PM_PBBDIV_OFFSET 31 --#define PM_PBBDIV_SIZE 1 -- --/* Bitfields in PLL0 */ --#define PM_PLLEN_OFFSET 0 --#define PM_PLLEN_SIZE 1 --#define PM_PLLOSC_OFFSET 1 --#define PM_PLLOSC_SIZE 1 --#define PM_PLLOPT_OFFSET 2 --#define PM_PLLOPT_SIZE 3 --#define PM_PLLDIV_OFFSET 8 --#define PM_PLLDIV_SIZE 8 --#define PM_PLLMUL_OFFSET 16 --#define PM_PLLMUL_SIZE 8 --#define PM_PLLCOUNT_OFFSET 24 --#define PM_PLLCOUNT_SIZE 6 --#define PM_PLLTEST_OFFSET 31 --#define PM_PLLTEST_SIZE 1 -- --/* Bitfields in ICR */ --#define PM_LOCK0_OFFSET 0 --#define PM_LOCK0_SIZE 1 --#define PM_LOCK1_OFFSET 1 --#define PM_LOCK1_SIZE 1 --#define PM_WAKE_OFFSET 2 --#define PM_WAKE_SIZE 1 --#define PM_CKRDY_OFFSET 5 --#define PM_CKRDY_SIZE 1 --#define PM_MSKRDY_OFFSET 6 --#define PM_MSKRDY_SIZE 1 -- --/* Bitfields in GCCTRL0 */ --#define PM_OSCSEL_OFFSET 0 --#define PM_OSCSEL_SIZE 1 --#define PM_PLLSEL_OFFSET 1 --#define PM_PLLSEL_SIZE 1 --#define PM_CEN_OFFSET 2 --#define PM_CEN_SIZE 1 --#define PM_DIVEN_OFFSET 4 --#define PM_DIVEN_SIZE 1 --#define PM_DIV_OFFSET 8 --#define PM_DIV_SIZE 8 -- --/* Bitfields in RCAUSE */ --#define PM_POR_OFFSET 0 --#define PM_POR_SIZE 1 --#define PM_EXT_OFFSET 2 --#define PM_EXT_SIZE 1 --#define PM_WDT_OFFSET 3 --#define PM_WDT_SIZE 1 --#define PM_NTAE_OFFSET 4 --#define PM_NTAE_SIZE 1 -- --/* Bit manipulation macros */ --#define PM_BIT(name) \ -- (1 << PM_##name##_OFFSET) --#define PM_BF(name,value) \ -- (((value) & ((1 << PM_##name##_SIZE) - 1)) \ -- << PM_##name##_OFFSET) --#define PM_BFEXT(name,value) \ -- (((value) >> PM_##name##_OFFSET) \ -- & ((1 << PM_##name##_SIZE) - 1)) --#define PM_BFINS(name,value,old)\ -- (((old) & ~(((1 << PM_##name##_SIZE) - 1) \ -- << PM_##name##_OFFSET)) \ -- | PM_BF(name,value)) -- --/* Register access macros */ --#define pm_readl(reg) \ -- __raw_readl((void __iomem __force *)PM_BASE + PM_##reg) --#define pm_writel(reg,value) \ -- __raw_writel((value), (void __iomem __force *)PM_BASE + PM_##reg) -- --#endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */ -diff --git a/arch/avr32/mach-at32ap/sdc.h b/arch/avr32/mach-at32ap/sdc.h -new file mode 100644 -index 0000000..6f5ec00 ---- /dev/null -+++ b/arch/avr32/mach-at32ap/sdc.h -@@ -0,0 +1,103 @@ -+/* SDC */ -+ -+/* Register offsets */ -+#define SDC_CTRL 0x0000 -+#define SDC_ASYNC 0x0004 -+#define SDC_SYNC 0x0008 -+#define SDC_FILTERDUR 0x000c -+#define SDC_OSCCTRL32 0x0010 -+#define SDC_STATUS 0x0014 -+#define SDC_ECR 0x0018 -+#define SDC_IER 0x001c -+#define SDC_IDR 0x0020 -+#define SDC_IMR 0x0024 -+#define SDC_GPLP 0x0040 -+ -+/* Bits in CTRL */ -+#define SDC_CTRL_PIN_EN_BIT 0 -+#define SDC_CTRL_AST_EN_BIT 8 -+#define SDC_CTRL_WDT_EN_BIT 9 -+#define SDC_CTRL_OCD_EN_BIT 10 -+#define SDC_CTRL_JTAG_EN_BIT 11 -+#define SDC_CTRL_CORE_POR_TEST_BIT 23 -+#define SDC_CTRL_KEY_START 24 -+#define SDC_CTRL_KEY_SIZE 8 -+ -+/* Bits in ASYNC */ -+#define SDC_ASYNC_MODE_BIT 4 -+#define SDC_ASYNC_POL_BIT 8 -+#define SDC_ASYNC_KEY_START 24 -+#define SDC_ASYNC_KEY_SIZE 8 -+ -+/* Bits in SYNC */ -+#define SDC_SYNC_EN_BIT 0 -+#define SDC_SYNC_MODE_BIT 4 -+#define SDC_SYNC_POL_BIT 8 -+#define SDC_SYNC_FILTER_BIT 12 -+#define SDC_SYNC_KEY_START 24 -+#define SDC_SYNC_KEY_SIZE 8 -+ -+/* Bits in FILTERDUR */ -+#define SDC_FILTERDUR_Duration_START 0 -+#define SDC_FILTERDUR_Duration_SIZE 16 -+#define SDC_FILTERDUR_KEY_START 24 -+#define SDC_FILTERDUR_KEY_SIZE 8 -+ -+/* Bits in OSCCTRL32 */ -+#define SDC_OSCCTRL32_OSC32EN_BIT 0 -+#define SDC_OSCCTRL32_MODE_START 8 -+#define SDC_OSCCTRL32_MODE_SIZE 4 -+#define SDC_OSCCTRL32_STARTUP_START 16 -+#define SDC_OSCCTRL32_STARTUP_SIZE 3 -+#define SDC_OSCCTRL32_KEY_START 24 -+#define SDC_OSCCTRL32_KEY_SIZE 8 -+ -+/* Bits in STATUS */ -+#define SDC_STATUS_PIN_EVENT_BIT 0 -+#define SDC_STATUS_AST_EVENT_BIT 8 -+#define SDC_STATUS_WDT_EVENT_BIT 9 -+#define SDC_STATUS_OCD_EVENT_BIT 10 -+#define SDC_STATUS_JTAG_EVENT_BIT 11 -+#define SDC_STATUS_PIN_BIT 16 -+#define SDC_STATUS_BUSY_BIT 24 -+#define SDC_STATUS_SWTCH_BIT 30 -+#define SDC_STATUS_VBAT_BIT 31 -+ -+/* Bits in ECR */ -+#define SDC_ECR_PIN_EVENT_BIT 0 -+#define SDC_ECR_AST_EVENT_BIT 8 -+#define SDC_ECR_WDT_EVENT_BIT 9 -+#define SDC_ECR_OCD_EVENT_BIT 10 -+#define SDC_ECR_JTAG_EVENT_BIT 11 -+ -+/* Bits in IER */ -+#define SDC_IER_PIN_EVENT_BIT 0 -+#define SDC_IER_READY_BIT 24 -+ -+/* Bits in IDR */ -+#define SDC_IDR_PIN_EVENT_BIT 0 -+#define SDC_IDR_READY_BIT 24 -+ -+/* Bits in IMR */ -+#define SDC_IMR_PIN_EVENT_BIT 0 -+#define SDC_IMR_READY_BIT 24 -+ -+/* Bit manipulation macros */ -+#define SDC_BIT(name) \ -+ (1 << SDC_##name##_BIT) -+#define SDC_BF(name,value) \ -+ (((value) & ((1 << SDC_##name##_SIZE) - 1)) \ -+ << SDC_##name##_START) -+#define SDC_BFEXT(name,value) \ -+ (((value) >> SDC_##name##_START) \ -+ & ((1 << SDC_##name##_SIZE) - 1)) -+#define SDC_BFINS(name,value,old) \ -+ (((old) & ~(((1 << SDC_##name##_SIZE) - 1) \ -+ << SDC_##name##_START)) \ -+ | SDC_BF(name,value)) -+ -+/* Register access macros */ -+#define sdc_readl(reg) \ -+ __raw_readl((void __iomem __force *)(SDC_BASE + SDC_##reg)) -+#define sdc_writel(reg, value) \ -+ __raw_writel(value, (void __iomem __force *)(SDC_BASE + SDC_##reg)) -diff --git a/arch/avr32/mach-at32ap/timer-ast.c b/arch/avr32/mach-at32ap/timer-ast.c -new file mode 100644 -index 0000000..0afff19 ---- /dev/null -+++ b/arch/avr32/mach-at32ap/timer-ast.c -@@ -0,0 +1,191 @@ -+/* -+ * Asynchronous Timer (AST) used as clocksource / clockevent -+ * -+ * Copyright (C) 2008 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include <linux/clk.h> -+#include <linux/clockchips.h> -+#include <linux/clocksource.h> -+#include <linux/interrupt.h> -+#include <linux/init.h> -+#include <linux/io.h> -+#include <linux/irq.h> -+#include <linux/platform_device.h> -+ -+#include <asm/ast_regs.h> -+ -+static void __iomem *ast_regs; -+ -+static inline void ast_wait_ready(void) -+{ -+ while (ast_readl(ast_regs, SR) & AST_BIT(BUSY)) -+ cpu_relax(); -+} -+ -+static cycle_t read_ast_counter(void) -+{ -+ return ast_readl(ast_regs, CV); -+} -+ -+static struct clocksource ast_clksrc = { -+ .name = "ast", -+ .rating = 400, -+ .read = read_ast_counter, -+ .mask = CLOCKSOURCE_MASK(32), -+ .shift = 16, -+ .flags = CLOCK_SOURCE_IS_CONTINUOUS, -+}; -+ -+static irqreturn_t ast_clkevt_interrupt(int irq, void *dev_id) -+{ -+ struct clock_event_device *clkevt = dev_id; -+ -+ /* -+ * We make sure delta is always long enough so that the BUSY -+ * bit is never set at this point. -+ */ -+ ast_writel(ast_regs, SCR, AST_BIT(ALARM0)); -+ clkevt->event_handler(clkevt); -+ -+ return IRQ_HANDLED; -+} -+ -+static struct irqaction ast_clkevt_irqaction = { -+ .handler = ast_clkevt_interrupt, -+ .flags = IRQF_TIMER | IRQF_DISABLED, -+ .name = "timer-ast", -+}; -+ -+static int ast_next_event(unsigned long delta, -+ struct clock_event_device *clkevt) -+{ -+ ast_wait_ready(); -+ ast_writel(ast_regs, AR0, ast_readl(ast_regs, CV) + delta); -+ -+ return 0; -+} -+ -+static void ast_mode(enum clock_event_mode mode, -+ struct clock_event_device *evdev) -+{ -+ switch (mode) { -+ case CLOCK_EVT_MODE_ONESHOT: -+ case CLOCK_EVT_MODE_RESUME: -+ /* Make sure we don't trigger an alarm before we get -+ * around to reprogramming it. -+ */ -+ ast_wait_ready(); -+ ast_writel(ast_regs, AR0, ast_readl(ast_regs, CV) - 1); -+ ast_wait_ready(); -+ ast_writel(ast_regs, SCR, AST_BIT(ALARM0)); -+ ast_wait_ready(); -+ ast_writel(ast_regs, IER, AST_BIT(ALARM0)); -+ break; -+ case CLOCK_EVT_MODE_UNUSED: -+ case CLOCK_EVT_MODE_SHUTDOWN: -+ ast_writel(ast_regs, IDR, AST_BIT(ALARM0)); -+ break; -+ default: -+ BUG(); -+ } -+} -+ -+static struct clock_event_device ast_clkevt = { -+ .name = "ast", -+ .features = CLOCK_EVT_FEAT_ONESHOT, -+ .shift = 16, -+ .rating = 400, -+ .cpumask = CPU_MASK_CPU0, -+ .set_next_event = ast_next_event, -+ .set_mode = ast_mode, -+}; -+ -+void __init ast_time_init(struct platform_device *pdev, unsigned int clksel) -+{ -+ struct clk *clk, *pclk; -+ struct resource *regs; -+ unsigned long ast_hz; -+ int irq; -+ int ret; -+ -+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!regs) { -+ pr_debug("AST: No MMIO resource\n"); -+ return; -+ } -+ -+ pclk = clk_get(&pdev->dev, "pclk"); -+ if (!pclk) { -+ pr_debug("AST: No peripheral clock (pclk)\n"); -+ return; -+ } -+ clk_enable(pclk); -+ -+ /* Too early for ioremap() */ -+ ast_regs = (void __iomem __force *)regs->start; -+ -+ switch (clksel) { -+ case AST_CLOCK_SLOW: -+ clk = clk_get(NULL, "rcosc"); -+ break; -+ case AST_CLOCK_OSC32: -+ clk = clk_get(NULL, "osc32"); -+ break; -+ case AST_CLOCK_PB: -+ clk = pclk; -+ break; -+ case AST_CLOCK_GC: -+ clk = clk_get(&pdev->dev, "gclk"); -+ break; -+ default: -+ clk = NULL; -+ break; -+ } -+ -+ if (!clk) { -+ pr_debug("AST: clock %u invalid, using pb clock\n", clksel); -+ clk = pclk; -+ } -+ clk_enable(clk); -+ -+ ast_writel(ast_regs, CLOCK, -+ AST_BF(CLOCK_CSSEL, clksel) | AST_BIT(CLOCK_CEN)); -+ ast_writel(ast_regs, CR, AST_BIT(CR_EN) | AST_BIT(CR_PCLR)); -+ -+ /* Using hardcoded divide-by-two prescaler */ -+ ast_hz = clk_get_rate(clk) / 2; -+ ast_clksrc.mult = clocksource_hz2mult(ast_hz, ast_clksrc.shift); -+ -+ ret = clocksource_register(&ast_clksrc); -+ if (ret) -+ pr_debug("AST: could not register clocksource: %d\n", ret); -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) { -+ pr_debug("AST: No IRQ resource, won't setup clockevent\n"); -+ return; -+ } -+ -+ ast_clkevt.mult = div_sc(ast_hz, NSEC_PER_SEC, ast_clkevt.shift); -+ ast_clkevt.max_delta_ns = clockevent_delta2ns((u32)~0U, &ast_clkevt); -+ ast_clkevt.min_delta_ns = clockevent_delta2ns(2, &ast_clkevt) + 100; -+ -+ ast_clkevt_irqaction.dev_id = &ast_clkevt; -+ -+ ret = setup_irq(irq, &ast_clkevt_irqaction); -+ if (ret) { -+ pr_debug("AST: Could not request IRQ %d: %d\n", irq, ret); -+ return; -+ } -+ -+ clockevents_register_device(&ast_clkevt); -+ -+ pr_info("Using Asynchronous Timer %d @ %lu.%03lu Mhz" -+ " (regs 0x%p, irq %d)\n", -+ pdev->id, ((ast_hz + 500) / 1000) / 1000, -+ ((ast_hz + 500) / 1000) % 1000, ast_regs, irq); -+} -diff --git a/arch/avr32/mm/tlb.c b/arch/avr32/mm/tlb.c -index 06677be..cede41b 100644 ---- a/arch/avr32/mm/tlb.c -+++ b/arch/avr32/mm/tlb.c -@@ -12,7 +12,13 @@ - #include <asm/mmu_context.h> - - /* TODO: Get the correct number from the CONFIG1 system register */ --#define NR_TLB_ENTRIES 32 -+#if defined(CONFIG_CPU_AT32AP700X) -+# define NR_TLB_ENTRIES 32 -+#elif defined(CONFIG_CPU_AT32AP720X) -+# define NR_TLB_ENTRIES 64 -+#else -+# error Unknown CPU type -+#endif - - static void show_dtlb_entry(unsigned int index) - { -@@ -85,9 +91,15 @@ static void update_dtlb(unsigned long address, pte_t pte) - u32 tlbar = sysreg_read(TLBARLO); - - rp = 32 - fls(tlbar); -- if (rp == 32) { -+ if (NR_TLB_ENTRIES > 32 && rp >= 32) { -+ tlbar = sysreg_read(TLBARHI); -+ rp = 64 - fls(tlbar); -+ } -+ if (rp >= NR_TLB_ENTRIES) { - rp = 0; - sysreg_write(TLBARLO, -1L); -+ if (NR_TLB_ENTRIES > 32) -+ sysreg_write(TLBARHI, -1L); - } - - mmucr = SYSREG_BFINS(DRP, rp, mmucr); -@@ -131,16 +143,22 @@ static void __flush_tlb_page(unsigned long asid, unsigned long page) - - if (!(mmucr & SYSREG_BIT(MMUCR_N))) { - unsigned int entry; -- u32 tlbarlo; -+ u32 tlbarlo, tlbarhi; - - /* Clear the "valid" bit */ - sysreg_write(TLBEHI, tlbehi); - - /* mark the entry as "not accessed" */ - entry = SYSREG_BFEXT(DRP, mmucr); -- tlbarlo = sysreg_read(TLBARLO); -- tlbarlo |= (0x80000000UL >> entry); -- sysreg_write(TLBARLO, tlbarlo); -+ if (NR_TLB_ENTRIES > 32 && entry > 32) { -+ tlbarhi = sysreg_read(TLBARHI); -+ tlbarhi |= (0x80000000UL >> (entry - 32)); -+ sysreg_write(TLBARHI, tlbarhi); -+ } else { -+ tlbarlo = sysreg_read(TLBARLO); -+ tlbarlo |= (0x80000000UL >> entry); -+ sysreg_write(TLBARLO, tlbarlo); -+ } - - /* update the entry with valid bit clear */ - __builtin_tlbw(); -@@ -179,9 +197,10 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, - unsigned long flags; - int size; - -- local_irq_save(flags); - size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; - -+ local_irq_save(flags); -+ - if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */ - mm->context = NO_CONTEXT; - if (mm == current->mm) -diff --git a/arch/avr32/oprofile/Makefile b/arch/avr32/oprofile/Makefile -index 1fe81c3..e0eb520 100644 ---- a/arch/avr32/oprofile/Makefile -+++ b/arch/avr32/oprofile/Makefile -@@ -5,4 +5,4 @@ oprofile-y := $(addprefix ../../../drivers/oprofile/, \ - event_buffer.o oprofile_files.o \ - oprofilefs.o oprofile_stats.o \ - timer_int.o) --oprofile-y += op_model_avr32.o -+oprofile-y += op_model_avr32.o backtrace.o -diff --git a/arch/avr32/oprofile/backtrace.c b/arch/avr32/oprofile/backtrace.c -new file mode 100644 -index 0000000..75d9ad6 ---- /dev/null -+++ b/arch/avr32/oprofile/backtrace.c -@@ -0,0 +1,81 @@ -+/* -+ * AVR32 specific backtracing code for oprofile -+ * -+ * Copyright 2008 Weinmann GmbH -+ * -+ * Author: Nikolaus Voss <n.voss@weinmann.de> -+ * -+ * Based on i386 oprofile backtrace code by John Levon and David Smith -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include <linux/oprofile.h> -+#include <linux/sched.h> -+#include <linux/uaccess.h> -+ -+/* The first two words of each frame on the stack look like this if we have -+ * frame pointers */ -+struct frame_head { -+ unsigned long lr; -+ struct frame_head *fp; -+}; -+ -+/* copied from arch/avr32/kernel/process.c */ -+static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p) -+{ -+ return (p > (unsigned long)tinfo) -+ && (p < (unsigned long)tinfo + THREAD_SIZE - 3); -+} -+ -+/* copied from arch/x86/oprofile/backtrace.c */ -+static struct frame_head *dump_user_backtrace(struct frame_head *head) -+{ -+ struct frame_head bufhead[2]; -+ -+ /* Also check accessibility of one struct frame_head beyond */ -+ if (!access_ok(VERIFY_READ, head, sizeof(bufhead))) -+ return NULL; -+ if (__copy_from_user_inatomic(bufhead, head, sizeof(bufhead))) -+ return NULL; -+ -+ oprofile_add_trace(bufhead[0].lr); -+ -+ /* frame pointers should strictly progress back up the stack -+ * (towards higher addresses) */ -+ if (bufhead[0].fp <= head) -+ return NULL; -+ -+ return bufhead[0].fp; -+} -+ -+void avr32_backtrace(struct pt_regs * const regs, unsigned int depth) -+{ -+ /* Get first frame pointer */ -+ struct frame_head *head = (struct frame_head *)(regs->r7); -+ -+ if (!user_mode(regs)) { -+#ifdef CONFIG_FRAME_POINTER -+ /* -+ * Traverse the kernel stack from frame to frame up to -+ * "depth" steps. -+ */ -+ while (depth-- && valid_stack_ptr(task_thread_info(current), -+ (unsigned long)head)) { -+ oprofile_add_trace(head->lr); -+ if (head->fp <= head) -+ break; -+ head = head->fp; -+ } -+#endif -+ } else { -+ /* Assume we have frame pointers in user mode process */ -+ while (depth-- && head) -+ head = dump_user_backtrace(head); -+ } -+} -+ -+ -diff --git a/arch/avr32/oprofile/op_model_avr32.c b/arch/avr32/oprofile/op_model_avr32.c -index df42325..a3e9b3c 100644 ---- a/arch/avr32/oprofile/op_model_avr32.c -+++ b/arch/avr32/oprofile/op_model_avr32.c -@@ -22,6 +22,8 @@ - #define AVR32_PERFCTR_IRQ_GROUP 0 - #define AVR32_PERFCTR_IRQ_LINE 1 - -+void avr32_backtrace(struct pt_regs * const regs, unsigned int depth); -+ - enum { PCCNT, PCNT0, PCNT1, NR_counter }; - - struct avr32_perf_counter { -@@ -223,6 +225,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) - memcpy(ops, &avr32_perf_counter_ops, - sizeof(struct oprofile_operations)); - -+ ops->backtrace = avr32_backtrace; -+ - printk(KERN_INFO "oprofile: using AVR32 performance monitoring.\n"); - - return 0; -diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig -index cd30390..9322b91 100644 ---- a/drivers/dma/Kconfig -+++ b/drivers/dma/Kconfig -@@ -38,6 +38,20 @@ config INTEL_IOP_ADMA - help - Enable support for the Intel(R) IOP Series RAID engines. - -+config ATMEL_PDCA -+ tristate "Atmel Peripheral DMA Controller A support" -+ depends on AVR32 -+ select DMA_ENGINE -+ default y if CPU_AT32AP7200 -+ help -+ Support the Atmel Peripheral DMA Controller found on AVR32 -+ UC3 chips as well as newer AP7 chips. This controller is -+ similar to the PDC found on AT32AP7000 and various AT91 -+ chips, but has its own register bank. -+ -+ This controller only supports peripheral (slave) transfers, -+ not memory-to-memory transfers. -+ - config DW_DMAC - tristate "Synopsys DesignWare AHB DMA support" - depends on AVR32 -diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile -index 14f5952..1623a6d 100644 ---- a/drivers/dma/Makefile -+++ b/drivers/dma/Makefile -@@ -4,6 +4,7 @@ obj-$(CONFIG_DMATEST) += dmatest.o - obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o - ioatdma-objs := ioat.o ioat_dma.o ioat_dca.o - obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o -+obj-$(CONFIG_ATMEL_PDCA) += atmel_pdca.o - obj-$(CONFIG_FSL_DMA) += fsldma.o - obj-$(CONFIG_MV_XOR) += mv_xor.o - obj-$(CONFIG_DW_DMAC) += dw_dmac.o -diff --git a/drivers/dma/atmel_pdca.c b/drivers/dma/atmel_pdca.c -new file mode 100644 -index 0000000..0d2f49f ---- /dev/null -+++ b/drivers/dma/atmel_pdca.c -@@ -0,0 +1,668 @@ -+/* -+ * Driver for the Atmel PDCA Peripheral DMA Controller -+ * -+ * Copyright (C) 2008 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#define DEBUG -+#include <linux/atmel_pdca.h> -+#include <linux/clk.h> -+#include <linux/dmaengine.h> -+#include <linux/dma-mapping.h> -+#include <linux/init.h> -+#include <linux/interrupt.h> -+#include <linux/io.h> -+#include <linux/kernel.h> -+#include <linux/list.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/scatterlist.h> -+#include <linux/spinlock.h> -+ -+/* -+ * Since each descriptor can hold a whole scatterlist, we don't need -+ * many of them. -+ */ -+#define NR_DESCS_PER_CHANNEL 8 -+ -+static struct pdca_desc *pdca_desc_entry(struct list_head *node) -+{ -+ return list_entry(node, struct pdca_desc, desc_node); -+} -+ -+static struct pdca_desc *pdca_next_desc(struct pdca_chan *pch, -+ struct pdca_desc *desc) -+{ -+ if (desc->desc_node.next != &pch->queue) -+ return pdca_desc_entry(desc->desc_node.next); -+ return NULL; -+} -+ -+static struct pdca_desc *pdca_desc_get(struct pdca_chan *pch) -+{ -+ struct pdca_desc *desc = NULL; -+ -+ spin_lock_bh(&pch->lock); -+ if (likely(!list_empty(&pch->freelist))) { -+ desc = pdca_desc_entry(pch->freelist.next); -+ list_del(&desc->desc_node); -+ } -+ spin_unlock_bh(&pch->lock); -+ -+ return desc; -+} -+ -+static dma_cookie_t pdca_assign_cookie(struct pdca_chan *pch, -+ struct pdca_desc *desc) -+{ -+ dma_cookie_t cookie = pch->chan.cookie; -+ -+ if (++cookie < 0) -+ cookie = 1; -+ -+ pch->chan.cookie = cookie; -+ desc->txd.cookie = cookie; -+ -+ return cookie; -+} -+ -+static void pdca_desc_done(struct pdca_chan *pch, struct pdca_desc *desc) -+{ -+ struct dma_async_tx_descriptor *txd = &desc->txd; -+ dma_async_tx_callback callback; -+ void *param; -+ -+ pch->completed = txd->cookie; -+ callback = txd->callback; -+ param = txd->callback_param; -+ -+ dev_vdbg(&pch->chan.dev, " completed %u\n", txd->cookie); -+ -+ /* -+ * We can only handle scatterlists, so this is easy. No other -+ * drivers do the right thing with scatterlists though... -+ * -+ * Note that we ensure that at least one of these flags are -+ * set when the descriptor is prepared, as we never need to -+ * unmap the peripheral side. -+ */ -+ if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) -+ dma_unmap_sg(pch->chan.dev.parent, desc->sg, desc->sg_len, -+ DMA_FROM_DEVICE); -+ if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) -+ dma_unmap_sg(pch->chan.dev.parent, desc->sg, desc->sg_len, -+ DMA_TO_DEVICE); -+ -+ list_move(&desc->desc_node, &pch->freelist); -+ -+ if (callback) -+ callback(param); -+} -+ -+static void pdca_chan_tasklet(unsigned long param) -+{ -+ struct pdca_chan *pch = (struct pdca_chan *)param; -+ void __iomem *regs = pch->regs; -+ struct pdca_desc *cur; -+ struct pdca_desc *next; -+ struct scatterlist *cur_sg; -+ struct scatterlist *next_sg; -+ u32 intflags; -+ u32 status; -+ -+ spin_lock(&pch->lock); -+ -+ cur = pdca_desc_entry(pch->queue.next); -+ next = pdca_next_desc(pch, cur); -+ -+ cur_sg = pch->cur_sg; -+ next_sg = pch->next_sg; -+ -+ intflags = PDCA_TERR | PDCA_TRC | PDCA_RCZ; -+ -+ status = pdca_readl(regs, ISR); -+ dev_vdbg(&pch->chan.dev, "tasklet: status=%08x\n", status); -+ -+ if (status & PDCA_TRC) { -+ if (cur_sg) { -+ if (sg_is_last(cur_sg)) { -+ dev_vdbg(&pch->chan.dev, -+ " cur sg was last in %u\n", -+ cur->txd.cookie); -+ pdca_desc_done(pch, cur); -+ cur = next; -+ next = NULL; -+ } -+ if (next_sg && sg_is_last(next_sg)) { -+ dev_vdbg(&pch->chan.dev, -+ " next sg was last in %u\n", -+ cur->txd.cookie); -+ pdca_desc_done(pch, cur); -+ cur = next; -+ next = NULL; -+ } -+ if (!cur) { -+ dev_vdbg(&pch->chan.dev, " all done\n"); -+ pdca_writel(regs, CR, PDCA_CR_TDIS); -+ cur_sg = next_sg = NULL; -+ intflags = 0; -+ goto done; -+ } -+ cur_sg = next_sg ? sg_next(next_sg) : NULL; -+ } -+ -+ if (!cur_sg) { -+ dev_vdbg(&pch->chan.dev, " load sg from %u\n", -+ cur->txd.cookie); -+ cur_sg = cur->sg; -+ pdca_writel(regs, PSR, cur->periph_id); -+ pdca_writel(regs, MR, cur->reg_width); -+ } -+ dev_vdbg(&pch->chan.dev, " START: %08x count: %08x\n", -+ sg_dma_address(cur_sg), -+ sg_dma_len(cur_sg) >> cur->reg_width); -+ pdca_writel(regs, MAR, sg_dma_address(cur_sg)); -+ pdca_writel(regs, TCR, sg_dma_len(cur_sg) >> cur->reg_width); -+ -+ next_sg = sg_next(cur_sg); -+ if (!next_sg) { -+ next = pdca_next_desc(pch, cur); -+ if (next && next->reg_width == cur->reg_width -+ && next->periph_id == cur->periph_id) { -+ dev_vdbg(&pch->chan.dev, -+ "loading next_sg from %u\n", -+ next->txd.cookie); -+ next_sg = next->sg; -+ } -+ } -+ if (next_sg) { -+ dev_vdbg(&pch->chan.dev, " NEXT: %08x count: %08x\n", -+ sg_dma_address(next_sg), -+ sg_dma_len(next_sg) >> cur->reg_width); -+ pdca_writel(regs, MARR, sg_dma_address(next_sg)); -+ pdca_writel(regs, TCRR, -+ sg_dma_len(next_sg) >> cur->reg_width); -+ } else { -+ intflags &= ~PDCA_RCZ; -+ } -+ } else if (next_sg && (status & PDCA_RCZ)) { -+ if (sg_is_last(cur_sg)) { -+ dev_vdbg(&pch->chan.dev, " cur sg was last in %u\n", -+ cur->txd.cookie); -+ next = pdca_next_desc(pch, cur); -+ pdca_desc_done(pch, cur); -+ cur = next; -+ next = NULL; -+ } -+ -+ cur_sg = next_sg; -+ next_sg = sg_next(cur_sg); -+ if (!next_sg) { -+ next = pdca_next_desc(pch, cur); -+ if (next && next->reg_width == cur->reg_width -+ && next->periph_id == cur->periph_id) -+ next_sg = next->sg; -+ } -+ -+ if (next_sg) { -+ dev_vdbg(&pch->chan.dev, " NEXT: %08x count: %08x\n", -+ sg_dma_address(next_sg), -+ sg_dma_len(next_sg) >> cur->reg_width); -+ pdca_writel(regs, MARR, sg_dma_address(next_sg)); -+ pdca_writel(regs, TCRR, -+ sg_dma_len(next_sg) >> cur->reg_width); -+ } else { -+ dev_vdbg(&pch->chan.dev, " no next sg\n"); -+ intflags &= ~PDCA_RCZ; -+ } -+ } -+ -+done: -+ if (status & PDCA_TERR) { -+ /* -+ * Head of queue is busted. We must remove it, clear -+ * the error and restart the queue. -+ */ -+ pdca_writel(regs, TCRR, 0); -+ pdca_writel(regs, TCR, 0); -+ pdca_writel(regs, CR, PDCA_CR_ECLR); -+ cur_sg = next_sg = NULL; -+ -+ if (!cur) -+ dev_err(&pch->chan.dev, -+ "Transfer Error with empty queue\n"); -+ else { -+ dev_vdbg(&pch->chan.dev, -+ " %u is busted\n", cur->txd.cookie); -+ pdca_desc_done(pch, cur); -+ } -+ -+ if (list_empty(&pch->queue)) { -+ pdca_writel(regs, CR, PDCA_CR_TDIS); -+ intflags = 0; -+ } -+ } -+ -+ pch->cur_sg = cur_sg; -+ pch->next_sg = next_sg; -+ -+ dev_vdbg(&pch->chan.dev, " enabling interrupts: %08x\n", intflags); -+ pdca_writel(regs, IER, intflags); -+ pdca_readl(regs, SR); -+ -+ spin_unlock(&pch->lock); -+} -+ -+static irqreturn_t pdca_interrupt(int irq, void *dev_id) -+{ -+ struct pdca_dev *pdca = dev_id; -+ struct pdca_chan *pch; -+ void __iomem *regs; -+ unsigned long pending; -+ unsigned int chan; -+ -+ pending = intc_get_pending(irq); -+ if (unlikely(!pending)) -+ return IRQ_NONE; -+ -+ do { -+ chan = __ffs(pending); -+ pch = &pdca->chan[chan]; -+ regs = pch->regs; -+ pdca_writel(regs, IDR, ~0UL); -+ tasklet_schedule(&pch->tasklet); -+ pdca_readl(regs, IMR); -+ pending &= ~(1 << chan); -+ } while (pending); -+ -+ return IRQ_HANDLED; -+} -+ -+static dma_cookie_t pdca_tx_submit(struct dma_async_tx_descriptor *txd) -+{ -+ struct pdca_desc *desc = txd_to_pdca_desc(txd); -+ struct pdca_chan *pch = dma_to_pdca_chan(txd->chan); -+ void __iomem *regs = pch->regs; -+ dma_cookie_t cookie; -+ -+ spin_lock_bh(&pch->lock); -+ cookie = pdca_assign_cookie(pch, desc); -+ dev_vdbg(&pch->chan.dev, "submitted %u\n", cookie); -+ list_add_tail(&desc->desc_node, &pch->queue); -+ pdca_writel(regs, CR, PDCA_CR_TEN); -+ pdca_writel(regs, IER, PDCA_TERR | PDCA_RCZ); -+ /* The tasklet will kickstart the queue if necessary */ -+ spin_unlock_bh(&pch->lock); -+ -+ return cookie; -+} -+ -+static struct dma_async_tx_descriptor *pdca_prep_slave_sg(struct dma_chan *chan, -+ struct scatterlist *sgl, unsigned int sg_len, -+ enum dma_data_direction direction, unsigned long flags) -+{ -+ struct pdca_chan *pch = dma_to_pdca_chan(chan); -+ struct pdca_slave *pslave = pch->pslave; -+ struct pdca_desc *desc; -+ unsigned int periph_id; -+ -+ dev_vdbg(&chan->dev, "prep_dma_slave: %s %u segments, flags: %lx\n", -+ direction == DMA_TO_DEVICE ? "OUT" : "IN", -+ sg_len, flags); -+ -+ switch (direction) { -+ case DMA_TO_DEVICE: -+ periph_id = pslave->tx_periph_id; -+ flags |= DMA_COMPL_SKIP_DEST_UNMAP; -+ break; -+ case DMA_FROM_DEVICE: -+ periph_id = pslave->rx_periph_id; -+ flags |= DMA_COMPL_SKIP_SRC_UNMAP; -+ break; -+ default: -+ return NULL; -+ } -+ -+ desc = pdca_desc_get(pch); -+ if (!desc) { -+ dev_err(&chan->dev, -+ "not enough descriptors available\n"); -+ return NULL; -+ } -+ desc->sg = sgl; -+ desc->sg_len = sg_len; -+ desc->periph_id = periph_id; -+ desc->reg_width = pslave->slave.reg_width; -+ desc->txd.flags = flags; -+ -+ return &desc->txd; -+} -+ -+static void pdca_terminate_all(struct dma_chan *chan) -+{ -+ struct pdca_chan *pch = dma_to_pdca_chan(chan); -+ struct pdca_desc *desc, *_desc; -+ void __iomem *regs = pch->regs; -+ -+ spin_lock_bh(&pch->lock); -+ pdca_writel(regs, CR, PDCA_CR_TDIS); -+ pdca_writel(regs, TCRR, 0); -+ pdca_writel(regs, TCR, 0); -+ while (pdca_readl(regs, SR) & PDCA_SR_TEN) -+ cpu_relax(); -+ -+ list_for_each_entry_safe(desc, _desc, &pch->queue, desc_node) -+ pdca_desc_done(pch, desc); -+ spin_unlock_bh(&pch->lock); -+} -+ -+static enum dma_status pdca_is_tx_complete(struct dma_chan *chan, -+ dma_cookie_t cookie, dma_cookie_t *done, dma_cookie_t *used) -+{ -+ struct pdca_chan *pch = dma_to_pdca_chan(chan); -+ dma_cookie_t last_used; -+ dma_cookie_t last_complete; -+ -+ last_complete = pch->completed; -+ last_used = chan->cookie; -+ -+ if (done) -+ *done = last_complete; -+ if (used) -+ *used = last_used; -+ -+ return dma_async_is_complete(cookie, last_complete, last_used); -+} -+ -+static void pdca_issue_pending(struct dma_chan *chan) -+{ -+ /* We always issue descriptors ASAP */ -+} -+ -+static int pdca_alloc_chan_resources(struct dma_chan *chan, -+ struct dma_client *client) -+{ -+ struct pdca_chan *pch = dma_to_pdca_chan(chan); -+ struct pdca_dev *pdca = dma_to_pdca_dev(chan->device); -+ struct dma_slave *slave = client->slave; -+ void __iomem *regs = pch->regs; -+ -+ /* -+ * Channels doing slave DMA can only handle one client. This -+ * controller can only do slave DMA. -+ */ -+ if (chan->client_count) -+ return -EBUSY; -+ if (!slave || !slave->dma_dev || slave->dma_dev != pdca->dma.dev) -+ return -EINVAL; -+ -+ if (pdca_readl(regs, SR) & PDCA_SR_TEN) -+ dev_err(&chan->dev, "DMA channel not idle!\n"); -+ -+ /* -+ * We may get called multiple times if a client rejects the -+ * channel... -+ */ -+ if (!pch->enabled) { -+ pch->enabled = true; -+ clk_enable(pdca->pclk); -+ clk_enable(pdca->hclk); -+ } -+ -+ pch->chan.cookie = pch->completed = 1; -+ pch->pslave = dma_to_pdca_slave(slave); -+ -+ while (pch->descs_allocated < NR_DESCS_PER_CHANNEL) { -+ struct pdca_desc *desc; -+ -+ desc = kzalloc(sizeof(struct pdca_desc), GFP_KERNEL); -+ if (!desc) { -+ dev_info(&chan->dev, "only allocated %d descriptors\n", -+ pch->descs_allocated); -+ break; -+ } -+ -+ dma_async_tx_descriptor_init(&desc->txd, chan); -+ desc->txd.tx_submit = pdca_tx_submit; -+ desc->txd.flags = DMA_CTRL_ACK; -+ INIT_LIST_HEAD(&desc->txd.tx_list); -+ list_add(&desc->desc_node, &pch->freelist); -+ pch->descs_allocated++; -+ } -+ -+ return pch->descs_allocated ? 0 : -ENOMEM; -+} -+ -+static void pdca_free_chan_resources(struct dma_chan *chan) -+{ -+ struct pdca_chan *pch = dma_to_pdca_chan(chan); -+ struct pdca_dev *pdca = dma_to_pdca_dev(chan->device); -+ struct pdca_desc *desc, *_desc; -+ -+ WARN_ON(!list_empty(&pch->queue)); -+ WARN_ON(pdca_readl(pch->regs, SR) & PDCA_SR_TEN); -+ WARN_ON(pdca_readl(pch->regs, IMR)); -+ -+ clk_disable(pdca->hclk); -+ clk_disable(pdca->pclk); -+ pch->enabled = false; -+ -+ list_for_each_entry_safe(desc, _desc, &pch->freelist, desc_node) { -+ list_del(&desc->desc_node); -+ kfree(desc); -+ } -+ -+ pch->descs_allocated = 0; -+} -+ -+static void pdca_suspend_channel(struct pdca_dev *pdca, struct pdca_chan *pch) -+{ -+ void __iomem *regs = pch->regs; -+ -+ /* -+ * REVISIT this whole business. -+ * -+ * The plan is to ensure that the PDCA doesn't do any bus -+ * transactions when we're suspended or shut down. Ideally, -+ * the client should make sure that all transfers have already -+ * been completed or terminated when we reach suspend_late(), -+ * but just in case that didn't happen, we should just stop -+ * the controller and turn it back on when resuming. Hopefully -+ * it will simply continue where it left off. -+ * -+ * We _probably_ need to save some sort of state to make this -+ * happen. Or we can just rely on interrupts being globally -+ * disabled at least until we reach resume_early. But that -+ * might not be the case for shutdown. -+ */ -+ tasklet_kill(&pch->tasklet); -+ spin_lock_bh(&pch->lock); -+ if (pdca_readl(regs, SR) & PDCA_SR_TEN) { -+ pdca_writel(regs, CR, PDCA_CR_TDIS); -+ while (pdca_readl(regs, SR) & PDCA_SR_TEN) -+ cpu_relax(); -+ -+ clk_disable(pdca->hclk); -+ clk_disable(pdca->pclk); -+ } -+ spin_unlock_bh(&pch->lock); -+} -+ -+static void __init pdca_init_channel(struct pdca_dev *pdca, unsigned int i) -+{ -+ struct pdca_chan *pch = &pdca->chan[i]; -+ -+ pch->chan.device = &pdca->dma; -+ pch->chan.chan_id = i; -+ pch->regs = pdca->regs + i * PDCA_CHAN_SIZE; -+ tasklet_init(&pch->tasklet, pdca_chan_tasklet, (unsigned long)pch); -+ spin_lock_init(&pch->lock); -+ INIT_LIST_HEAD(&pch->freelist); -+ INIT_LIST_HEAD(&pch->queue); -+ -+ list_add_tail(&pch->chan.device_node, &pdca->dma.channels); -+} -+ -+static int __init pdca_probe(struct platform_device *pdev) -+{ -+ struct pdca_pdata *pdata; -+ struct resource *mmio; -+ struct pdca_dev *pdca; -+ size_t mmio_len; -+ size_t size; -+ unsigned int i; -+ int irq; -+ int ret; -+ -+ pdata = pdev->dev.platform_data; -+ mmio = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ irq = platform_get_irq(pdev, 0); -+ if (!pdata || pdata->nr_channels > 32 || !mmio || !irq) { -+ dev_dbg(&pdev->dev, "invalid params from platform code\n"); -+ return -EINVAL; -+ } -+ -+ mmio_len = mmio->end - mmio->start + 1; -+ if (!request_mem_region(mmio->start, mmio_len, "atmel_pdca")) { -+ dev_dbg(&pdev->dev, "mmio resource busy\n"); -+ return -EBUSY; -+ } -+ -+ size = sizeof(struct pdca_dev); -+ size += pdata->nr_channels * sizeof(struct pdca_chan); -+ pdca = kzalloc(size, GFP_KERNEL); -+ if (!pdca) { -+ dev_dbg(&pdev->dev, "insufficient memory\n"); -+ ret = -ENOMEM; -+ goto err_alloc_pdca; -+ } -+ -+ pdca->hclk = clk_get(&pdev->dev, "hclk"); -+ if (IS_ERR(pdca->hclk)) { -+ dev_dbg(&pdev->dev, "no HSB clock\n"); -+ ret = PTR_ERR(pdca->hclk); -+ goto err_get_hclk; -+ } -+ pdca->pclk = clk_get(&pdev->dev, "pclk"); -+ if (IS_ERR(pdca->pclk)) { -+ dev_dbg(&pdev->dev, "no PB clock\n"); -+ ret = PTR_ERR(pdca->pclk); -+ goto err_get_pclk; -+ } -+ -+ pdca->regs = ioremap(mmio->start, mmio_len); -+ if (!pdca->regs) { -+ dev_dbg(&pdev->dev, "ioremap failed\n"); -+ ret = -ENOMEM; -+ goto err_ioremap; -+ } -+ -+ INIT_LIST_HEAD(&pdca->dma.channels); -+ for (i = 0; i < pdata->nr_channels; i++, pdca->dma.chancnt++) -+ pdca_init_channel(pdca, i); -+ -+ ret = request_irq(irq, pdca_interrupt, 0, pdev->dev.bus_id, pdca); -+ if (ret) { -+ dev_dbg(&pdev->dev, "request_irq failed\n"); -+ goto err_irq; -+ } -+ -+ dma_cap_set(DMA_SLAVE, pdca->dma.cap_mask); -+ pdca->dma.dev = &pdev->dev; -+ pdca->dma.device_alloc_chan_resources = pdca_alloc_chan_resources; -+ pdca->dma.device_free_chan_resources = pdca_free_chan_resources; -+ pdca->dma.device_prep_slave_sg = pdca_prep_slave_sg; -+ pdca->dma.device_terminate_all = pdca_terminate_all; -+ pdca->dma.device_is_tx_complete = pdca_is_tx_complete; -+ pdca->dma.device_issue_pending = pdca_issue_pending; -+ -+ platform_set_drvdata(pdev, pdca); -+ dma_async_device_register(&pdca->dma); -+ -+ dev_info(&pdev->dev, "Atmel PDCA at 0x%08lx (irq %d) %u channels\n", -+ (unsigned long)mmio->start, irq, pdca->dma.chancnt); -+ -+ return 0; -+ -+err_irq: -+ iounmap(pdca->regs); -+err_ioremap: -+ clk_put(pdca->pclk); -+err_get_pclk: -+ clk_put(pdca->hclk); -+err_get_hclk: -+ kfree(pdca); -+err_alloc_pdca: -+ release_resource(mmio); -+ return ret; -+} -+ -+static int __exit pdca_remove(struct platform_device *pdev) -+{ -+ struct pdca_dev *pdca = platform_get_drvdata(pdev); -+ struct pdca_chan *pch; -+ struct resource *mmio; -+ -+ list_for_each_entry(pch, &pdca->dma.channels, chan.device_node) -+ pdca_suspend_channel(pdca, pch); -+ -+ dma_async_device_unregister(&pdca->dma); -+ free_irq(platform_get_irq(pdev, 0), pdca); -+ clk_put(pdca->pclk); -+ clk_put(pdca->hclk); -+ iounmap(pdca->regs); -+ kfree(pdca); -+ -+ mmio = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ release_resource(mmio); -+ -+ return 0; -+} -+ -+static void pdca_shutdown(struct platform_device *pdev) -+{ -+ struct pdca_dev *pdca = platform_get_drvdata(pdev); -+ struct pdca_chan *pch; -+ -+ list_for_each_entry(pch, &pdca->dma.channels, chan.device_node) -+ pdca_suspend_channel(pdca, pch); -+} -+ -+static int pdca_suspend_late(struct platform_device *pdev, pm_message_t state) -+{ -+ return 0; -+} -+ -+static int pdca_resume_early(struct platform_device *pdev) -+{ -+ return 0; -+} -+ -+static struct platform_driver pdca_driver = { -+ .remove = __exit_p(pdca_remove), -+ .shutdown = pdca_shutdown, -+ .suspend_late = pdca_suspend_late, -+ .resume_early = pdca_resume_early, -+ .driver = { -+ .name = "atmel_pdca", -+ }, -+}; -+ -+static int __init pdca_init(void) -+{ -+ return platform_driver_probe(&pdca_driver, pdca_probe); -+} -+subsys_initcall(pdca_init); -+ -+static void __exit pdca_exit(void) -+{ -+ platform_driver_unregister(&pdca_driver); -+} -+module_exit(pdca_exit); -+ -+MODULE_LICENSE("GPL v2"); -+MODULE_DESCRIPTION("Atmel PDCA DMA Controller driver"); -+MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>"); -diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c -index 0778d99..a7686b9 100644 ---- a/drivers/dma/dw_dmac.c -+++ b/drivers/dma/dw_dmac.c -@@ -545,109 +545,51 @@ err_desc_get: - return NULL; - } - --static struct dma_async_tx_descriptor * --dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, -- unsigned int sg_len, enum dma_data_direction direction, -- unsigned long flags) -+static struct dw_desc *dwc_init_slave_descs(struct dw_dma_chan *dwc, -+ struct scatterlist *sgl, unsigned int sg_len, -+ u32 ctllo, dma_addr_t src_reg, dma_addr_t dst_reg, -+ unsigned int reg_width, unsigned long flags) - { -- struct dw_dma_chan *dwc = to_dw_dma_chan(chan); -- struct dw_dma_slave *dws = dwc->dws; -- struct dw_desc *prev; -- struct dw_desc *first; -- u32 ctllo; -- dma_addr_t reg; -- unsigned int reg_width; -- unsigned int mem_width; -- unsigned int i; -+ struct dma_chan *chan = &dwc->chan; - struct scatterlist *sg; -+ struct dw_desc *desc; -+ struct dw_desc *first = NULL; -+ struct dw_desc *prev = NULL; -+ unsigned int align_mask; -+ unsigned int i; - size_t total_len = 0; - -- dev_vdbg(&chan->dev, "prep_dma_slave\n"); -- -- if (unlikely(!dws || !sg_len)) -- return NULL; -- -- reg_width = dws->slave.reg_width; -- prev = first = NULL; -- -- sg_len = dma_map_sg(chan->dev.parent, sgl, sg_len, direction); -+ align_mask = (1 << reg_width) - 1; -+ for_each_sg(sgl, sg, sg_len, i) { -+ u32 len; -+ u32 desc_len; -+ u32 mem; - -- switch (direction) { -- case DMA_TO_DEVICE: -- ctllo = (DWC_DEFAULT_CTLLO -- | DWC_CTLL_DST_WIDTH(reg_width) -- | DWC_CTLL_DST_FIX -- | DWC_CTLL_SRC_INC -- | DWC_CTLL_FC_M2P); -- reg = dws->slave.tx_reg; -- for_each_sg(sgl, sg, sg_len, i) { -- struct dw_desc *desc; -- u32 len; -- u32 mem; -+ mem = sg_phys(sg); -+ len = sg_dma_len(sg); -+ total_len += len; - -+ while (len) { -+ desc_len = min(len, DWC_MAX_COUNT << reg_width); - desc = dwc_desc_get(dwc); - if (!desc) { - dev_err(&chan->dev, - "not enough descriptors available\n"); - goto err_desc_get; - } -+ len -= desc_len; - -- mem = sg_phys(sg); -- len = sg_dma_len(sg); -- mem_width = 2; -- if (unlikely(mem & 3 || len & 3)) -- mem_width = 0; -+ if (unlikely((mem & align_mask) || (len & align_mask))) -+ goto err_align; - -- desc->lli.sar = mem; -- desc->lli.dar = reg; -- desc->lli.ctllo = ctllo | DWC_CTLL_SRC_WIDTH(mem_width); -- desc->lli.ctlhi = len >> mem_width; -- -- if (!first) { -- first = desc; -- } else { -- prev->lli.llp = desc->txd.phys; -- dma_sync_single_for_device(chan->dev.parent, -- prev->txd.phys, -- sizeof(prev->lli), -- DMA_TO_DEVICE); -- list_add_tail(&desc->desc_node, -- &first->txd.tx_list); -- } -- prev = desc; -- total_len += len; -- } -- break; -- case DMA_FROM_DEVICE: -- ctllo = (DWC_DEFAULT_CTLLO -- | DWC_CTLL_SRC_WIDTH(reg_width) -- | DWC_CTLL_DST_INC -- | DWC_CTLL_SRC_FIX -- | DWC_CTLL_FC_P2M); -- -- reg = dws->slave.rx_reg; -- for_each_sg(sgl, sg, sg_len, i) { -- struct dw_desc *desc; -- u32 len; -- u32 mem; -- -- desc = dwc_desc_get(dwc); -- if (!desc) { -- dev_err(&chan->dev, -- "not enough descriptors available\n"); -- goto err_desc_get; -- } -- -- mem = sg_phys(sg); -- len = sg_dma_len(sg); -- mem_width = 2; -- if (unlikely(mem & 3 || len & 3)) -- mem_width = 0; -- -- desc->lli.sar = reg; -- desc->lli.dar = mem; -- desc->lli.ctllo = ctllo | DWC_CTLL_DST_WIDTH(mem_width); -- desc->lli.ctlhi = len >> reg_width; -+ desc->lli.sar = src_reg ? src_reg : mem; -+ desc->lli.dar = dst_reg ? dst_reg : mem; -+ desc->lli.ctllo = ctllo; -+ desc->lli.ctlhi = desc_len >> reg_width; -+ dev_vdbg(&dwc->chan.dev, -+ " s%08x d%08x c%08x:%08x\n", -+ desc->lli.sar, desc->lli.dar, -+ ctllo, desc_len >> reg_width); - - if (!first) { - first = desc; -@@ -661,11 +603,8 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, - &first->txd.tx_list); - } - prev = desc; -- total_len += len; -+ mem += desc_len; - } -- break; -- default: -- return NULL; - } - - if (flags & DMA_PREP_INTERRUPT) -@@ -679,13 +618,69 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, - - first->len = total_len; - -- return &first->txd; -+ return first; - -+err_align: -+ dwc_desc_put(dwc, desc); - err_desc_get: - dwc_desc_put(dwc, first); - return NULL; - } - -+static struct dma_async_tx_descriptor * -+dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, -+ unsigned int sg_len, enum dma_data_direction direction, -+ unsigned long flags) -+{ -+ struct dw_dma_chan *dwc = to_dw_dma_chan(chan); -+ struct dw_dma_slave *dws = dwc->dws; -+ struct dw_desc *first; -+ u32 ctllo; -+ unsigned int reg_width; -+ -+ dev_vdbg(&chan->dev, "prep_dma_slave: %s %u segments, flags: %lx\n", -+ direction == DMA_TO_DEVICE ? "OUT" : "IN", -+ sg_len, flags); -+ -+ if (unlikely(!dws || !sg_len)) -+ return NULL; -+ -+ reg_width = dws->slave.reg_width; -+ sg_len = dma_map_sg(chan->dev.parent, sgl, sg_len, direction); -+ -+ switch (direction) { -+ case DMA_TO_DEVICE: -+ ctllo = (DWC_DEFAULT_CTLLO -+ | DWC_CTLL_DST_WIDTH(reg_width) -+ | DWC_CTLL_SRC_WIDTH(reg_width) -+ | DWC_CTLL_DST_FIX -+ | DWC_CTLL_SRC_INC -+ | DWC_CTLL_FC_M2P); -+ first = dwc_init_slave_descs(dwc, sgl, sg_len, ctllo, -+ 0, dws->slave.tx_reg, reg_width, flags); -+ break; -+ case DMA_FROM_DEVICE: -+ ctllo = (DWC_DEFAULT_CTLLO -+ | DWC_CTLL_SRC_WIDTH(reg_width) -+ | DWC_CTLL_DST_WIDTH(reg_width) -+ | DWC_CTLL_DST_INC -+ | DWC_CTLL_SRC_FIX -+ | DWC_CTLL_FC_P2M); -+ first = dwc_init_slave_descs(dwc, sgl, sg_len, ctllo, -+ dws->slave.rx_reg, 0, reg_width, flags); -+ break; -+ default: -+ return NULL; -+ } -+ -+ if (unlikely(!first)) { -+ dma_unmap_sg(chan->dev.parent, sgl, sg_len, direction); -+ return NULL; -+ } -+ -+ return &first->txd; -+} -+ - static void dwc_terminate_all(struct dma_chan *chan) - { - struct dw_dma_chan *dwc = to_dw_dma_chan(chan); -@@ -1109,7 +1104,7 @@ static int __init dw_init(void) - { - return platform_driver_probe(&dw_driver, dw_probe); - } --module_init(dw_init); -+subsys_initcall(dw_init); - - static void __exit dw_exit(void) - { -diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig -index ea8d7a3..1ce21d4 100644 ---- a/drivers/mmc/host/Kconfig -+++ b/drivers/mmc/host/Kconfig -@@ -114,6 +114,17 @@ config MMC_ATMELMCI - - If unsure, say N. - -+config MMC_ATMELMCI_DMA -+ bool "Atmel MCI DMA support (EXPERIMENTAL)" -+ depends on MMC_ATMELMCI && DMA_ENGINE && EXPERIMENTAL -+ help -+ Say Y here to have the Atmel MCI driver use a DMA engine to -+ do data transfers and thus increase the throughput and -+ reduce the CPU utilization. Note that this is highly -+ experimental and may cause the driver to lock up. -+ -+ If unsure, say N. -+ - config MMC_IMX - tristate "Motorola i.MX Multimedia Card Interface support" - depends on ARCH_IMX -diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h -index 26bd80e..cfb7ce1 100644 ---- a/drivers/mmc/host/atmel-mci-regs.h -+++ b/drivers/mmc/host/atmel-mci-regs.h -@@ -10,13 +10,21 @@ - #ifndef __DRIVERS_MMC_ATMEL_MCI_H__ - #define __DRIVERS_MMC_ATMEL_MCI_H__ - --/* MCI Register Definitions */ -+/* -+ * MCI Register Definitions. Registers and bitfields marked with [2] -+ * are only available in MCI2. -+ */ - #define MCI_CR 0x0000 /* Control */ - # define MCI_CR_MCIEN ( 1 << 0) /* MCI Enable */ - # define MCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */ -+# define MCI_CR_PWSEN ( 1 << 2) /* Powersave Enable[2] */ -+# define MCI_CR_PWSDIS ( 1 << 3) /* Powersave Disable[2] */ -+# define MCI_CR_IOWAITEN ( 1 << 4) /* SDIO Read Wait Enable[2] */ -+# define MCI_CR_IOWAITDIS ( 1 << 5) /* SDIO Read Wait Disable[2] */ - # define MCI_CR_SWRST ( 1 << 7) /* Software Reset */ - #define MCI_MR 0x0004 /* Mode */ - # define MCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */ -+# define MCI_MR_PWSDIV(x) ((x) << 8) /* Powersave Divider[2] */ - # define MCI_MR_RDPROOF ( 1 << 11) /* Read Proof */ - # define MCI_MR_WRPROOF ( 1 << 12) /* Write Proof */ - #define MCI_DTOR 0x0008 /* Data Timeout */ -@@ -24,9 +32,12 @@ - # define MCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */ - #define MCI_SDCR 0x000c /* SD Card / SDIO */ - # define MCI_SDCSEL_SLOT_A ( 0 << 0) /* Select SD slot A */ --# define MCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot A */ --# define MCI_SDCBUS_1BIT ( 0 << 7) /* 1-bit data bus */ --# define MCI_SDCBUS_4BIT ( 1 << 7) /* 4-bit data bus */ -+# define MCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot B */ -+# define MCI_SDCSEL_MASK ( 3 << 0) -+# define MCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */ -+# define MCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */ -+# define MCI_SDCBUS_8BIT ( 3 << 6) /* 8-bit data bus[2] */ -+# define MCI_SDCBUS_MASK ( 3 << 6) - #define MCI_ARGR 0x0010 /* Command Argument */ - #define MCI_CMDR 0x0014 /* Command */ - # define MCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */ -@@ -54,6 +65,9 @@ - #define MCI_BLKR 0x0018 /* Block */ - # define MCI_BCNT(x) ((x) << 0) /* Data Block Count */ - # define MCI_BLKLEN(x) ((x) << 16) /* Data Block Length */ -+#define MCI_CSTOR 0x001c /* Completion Signal Timeout[2] */ -+# define MCI_CSTOCYC(x) ((x) << 0) /* CST cycles */ -+# define MCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */ - #define MCI_RSPR 0x0020 /* Response 0 */ - #define MCI_RSPR1 0x0024 /* Response 1 */ - #define MCI_RSPR2 0x0028 /* Response 2 */ -@@ -64,24 +78,45 @@ - #define MCI_IER 0x0044 /* Interrupt Enable */ - #define MCI_IDR 0x0048 /* Interrupt Disable */ - #define MCI_IMR 0x004c /* Interrupt Mask */ --# define MCI_CMDRDY ( 1 << 0) /* Command Ready */ --# define MCI_RXRDY ( 1 << 1) /* Receiver Ready */ --# define MCI_TXRDY ( 1 << 2) /* Transmitter Ready */ --# define MCI_BLKE ( 1 << 3) /* Data Block Ended */ --# define MCI_DTIP ( 1 << 4) /* Data Transfer In Progress */ --# define MCI_NOTBUSY ( 1 << 5) /* Data Not Busy */ --# define MCI_SDIOIRQA ( 1 << 8) /* SDIO IRQ in slot A */ --# define MCI_SDIOIRQB ( 1 << 9) /* SDIO IRQ in slot B */ --# define MCI_RINDE ( 1 << 16) /* Response Index Error */ --# define MCI_RDIRE ( 1 << 17) /* Response Direction Error */ --# define MCI_RCRCE ( 1 << 18) /* Response CRC Error */ --# define MCI_RENDE ( 1 << 19) /* Response End Bit Error */ --# define MCI_RTOE ( 1 << 20) /* Response Time-Out Error */ --# define MCI_DCRCE ( 1 << 21) /* Data CRC Error */ --# define MCI_DTOE ( 1 << 22) /* Data Time-Out Error */ --# define MCI_OVRE ( 1 << 30) /* RX Overrun Error */ --# define MCI_UNRE ( 1 << 31) /* TX Underrun Error */ -+# define MCI_CMDRDY ( 1 << 0) /* Command Ready */ -+# define MCI_RXRDY ( 1 << 1) /* Receiver Ready */ -+# define MCI_TXRDY ( 1 << 2) /* Transmitter Ready */ -+# define MCI_BLKE ( 1 << 3) /* Data Block Ended */ -+# define MCI_DTIP ( 1 << 4) /* Data Transfer In Progress */ -+# define MCI_NOTBUSY ( 1 << 5) /* Data Not Busy */ -+# define MCI_SDIOIRQA ( 1 << 8) /* SDIO IRQ in slot A */ -+# define MCI_SDIOIRQB ( 1 << 9) /* SDIO IRQ in slot B */ -+# define MCI_RINDE ( 1 << 16) /* Response Index Error */ -+# define MCI_RDIRE ( 1 << 17) /* Response Direction Error */ -+# define MCI_RCRCE ( 1 << 18) /* Response CRC Error */ -+# define MCI_RENDE ( 1 << 19) /* Response End Bit Error */ -+# define MCI_RTOE ( 1 << 20) /* Response Time-Out Error */ -+# define MCI_DCRCE ( 1 << 21) /* Data CRC Error */ -+# define MCI_DTOE ( 1 << 22) /* Data Time-Out Error */ -+# define MCI_OVRE ( 1 << 30) /* RX Overrun Error */ -+# define MCI_UNRE ( 1 << 31) /* TX Underrun Error */ -+#define MCI_DMA 0x0050 /* DMA Configuration[2] */ -+# define MCI_DMA_OFFSET(x) ((x) << 0) /* DMA write buffer offset */ -+# define MCI_DMA_CHKSIZE_1 ( 0 << 5) /* DMA chunk size */ -+# define MCI_DMA_CHKSIZE_4 ( 1 << 5) /* DMA chunk size */ -+# define MCI_DMA_CHKSIZE_8 ( 2 << 5) /* DMA chunk size */ -+# define MCI_DMA_CHKSIZE_16 ( 3 << 5) /* DMA chunk size */ -+# define MCI_DMAEN ( 1 << 8) /* DMA HW handshake enable */ -+#define MCI_CFG 0x0054 /* Configuration[2] */ -+# define MCI_CFG_FIFOMODE ( 1 << 0) /* Start transfer ASAP */ -+# define MCI_CFG_FERRCTRL ( 1 << 4) /* xrun flags clear-on-read */ -+# define MCI_CFG_HSMODE ( 1 << 8) /* Use high-speed signaling */ -+# define MCI_CFG_LSYNC ( 1 << 12) /* Synchronize on last block */ -+#define MCI_WPMR 0x00e4 /* Write Protect Mode[2] */ -+# define MCI_WP_EN ( 1 << 0) /* WP Enable */ -+# define MCI_WP_KEY (0x4d4349 << 8) /* WP Key */ -+#define MCI_WPSR 0x00e8 /* Write Protect Status[2] */ -+# define MCI_GET_WP_VS(x) ((x) & 0x0f) -+# define MCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff) -+#define MCI_VERSION 0x00fc /* MCI Core Version[2] */ -+#define MCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */ - -+/* This is not including the FIFO Aperture on MCI2 */ - #define MCI_REGS_SIZE 0x100 - - /* Register access macros */ -diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c -index 0000896..3480a5a 100644 ---- a/drivers/mmc/host/atmel-mci.c -+++ b/drivers/mmc/host/atmel-mci.c -@@ -11,6 +11,8 @@ - #include <linux/clk.h> - #include <linux/debugfs.h> - #include <linux/device.h> -+#include <linux/dmaengine.h> -+#include <linux/dma-mapping.h> - #include <linux/err.h> - #include <linux/gpio.h> - #include <linux/init.h> -@@ -29,68 +31,195 @@ - #include <asm/unaligned.h> - - #include <mach/board.h> -+#include <mach/cpu.h> - - #include "atmel-mci-regs.h" - - #define ATMCI_DATA_ERROR_FLAGS (MCI_DCRCE | MCI_DTOE | MCI_OVRE | MCI_UNRE) -+#define ATMCI_DMA_THRESHOLD 16 - - enum { - EVENT_CMD_COMPLETE = 0, -- EVENT_DATA_ERROR, -- EVENT_DATA_COMPLETE, -- EVENT_STOP_SENT, -- EVENT_STOP_COMPLETE, - EVENT_XFER_COMPLETE, -+ EVENT_DATA_COMPLETE, -+ EVENT_DATA_ERROR, -+}; -+ -+enum atmel_mci_state { -+ STATE_IDLE = 0, -+ STATE_SENDING_CMD, -+ STATE_SENDING_DATA, -+ STATE_DATA_BUSY, -+ STATE_SENDING_STOP, -+ STATE_DATA_ERROR, -+}; -+ -+struct atmel_mci_dma { -+#ifdef CONFIG_MMC_ATMELMCI_DMA -+ struct dma_client client; -+ struct dma_chan *chan; -+ struct dma_async_tx_descriptor *data_desc; -+#endif - }; - -+/** -+ * struct atmel_mci - MMC controller state shared between all slots -+ * @lock: Spinlock protecting the queue and associated data. -+ * @regs: Pointer to MMIO registers. -+ * @sg: Scatterlist entry currently being processed by PIO code, if any. -+ * @pio_offset: Offset into the current scatterlist entry. -+ * @cur_slot: The slot which is currently using the controller. -+ * @mrq: The request currently being processed on @cur_slot, -+ * or NULL if the controller is idle. -+ * @cmd: The command currently being sent to the card, or NULL. -+ * @data: The data currently being transferred, or NULL if no data -+ * transfer is in progress. -+ * @dma: DMA client state. -+ * @data_chan: DMA channel being used for the current data transfer. -+ * @cmd_status: Snapshot of SR taken upon completion of the current -+ * command. Only valid when EVENT_CMD_COMPLETE is pending. -+ * @data_status: Snapshot of SR taken upon completion of the current -+ * data transfer. Only valid when EVENT_DATA_COMPLETE or -+ * EVENT_DATA_ERROR is pending. -+ * @stop_cmdr: Value to be loaded into CMDR when the stop command is -+ * to be sent. -+ * @tasklet: Tasklet running the request state machine. -+ * @pending_events: Bitmask of events flagged by the interrupt handler -+ * to be processed by the tasklet. -+ * @completed_events: Bitmask of events which the state machine has -+ * processed. -+ * @state: Tasklet state. -+ * @queue: List of slots waiting for access to the controller. -+ * @need_clock_update: Update the clock rate before the next request. -+ * @need_reset: Reset controller before next request. -+ * @mode_reg: Value of the MR register. -+ * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus -+ * rate and timeout calculations. -+ * @mapbase: Physical address of the MMIO registers. -+ * @mck: The peripheral bus clock hooked up to the MMC controller. -+ * @pdev: Platform device associated with the MMC controller. -+ * @slot: Slots sharing this MMC controller. -+ * -+ * Locking -+ * ======= -+ * -+ * @lock is a softirq-safe spinlock protecting @queue as well as -+ * @cur_slot, @mrq and @state. These must always be updated -+ * at the same time while holding @lock. -+ * -+ * @lock also protects mode_reg and need_clock_update since these are -+ * used to synchronize mode register updates with the queue -+ * processing. -+ * -+ * The @mrq field of struct atmel_mci_slot is also protected by @lock, -+ * and must always be written at the same time as the slot is added to -+ * @queue. -+ * -+ * @pending_events and @completed_events are accessed using atomic bit -+ * operations, so they don't need any locking. -+ * -+ * None of the fields touched by the interrupt handler need any -+ * locking. However, ordering is important: Before EVENT_DATA_ERROR or -+ * EVENT_DATA_COMPLETE is set in @pending_events, all data-related -+ * interrupts must be disabled and @data_status updated with a -+ * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the -+ * CMDRDY interupt must be disabled and @cmd_status updated with a -+ * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the -+ * bytes_xfered field of @data must be written. This is ensured by -+ * using barriers. -+ */ - struct atmel_mci { -- struct mmc_host *mmc; -+ spinlock_t lock; - void __iomem *regs; - - struct scatterlist *sg; - unsigned int pio_offset; - -+ struct atmel_mci_slot *cur_slot; - struct mmc_request *mrq; - struct mmc_command *cmd; - struct mmc_data *data; - -+ struct atmel_mci_dma dma; -+ struct dma_chan *data_chan; -+ - u32 cmd_status; - u32 data_status; -- u32 stop_status; - u32 stop_cmdr; - -- u32 mode_reg; -- u32 sdc_reg; -- - struct tasklet_struct tasklet; - unsigned long pending_events; - unsigned long completed_events; -+ enum atmel_mci_state state; -+ struct list_head queue; - -- int present; -- int detect_pin; -- int wp_pin; -- -- /* For detect pin debouncing */ -- struct timer_list detect_timer; -- -+ bool need_clock_update; -+ bool need_reset; -+ u32 mode_reg; - unsigned long bus_hz; - unsigned long mapbase; - struct clk *mck; - struct platform_device *pdev; -+ -+ struct atmel_mci_slot *slot[ATMEL_MCI_MAX_NR_SLOTS]; -+}; -+ -+/** -+ * struct atmel_mci_slot - MMC slot state -+ * @mmc: The mmc_host representing this slot. -+ * @host: The MMC controller this slot is using. -+ * @sdc_reg: Value of SDCR to be written before using this slot. -+ * @mrq: mmc_request currently being processed or waiting to be -+ * processed, or NULL when the slot is idle. -+ * @queue_node: List node for placing this node in the @queue list of -+ * &struct atmel_mci. -+ * @clock: Clock rate configured by set_ios(). Protected by host->lock. -+ * @flags: Random state bits associated with the slot. -+ * @detect_pin: GPIO pin used for card detection, or negative if not -+ * available. -+ * @wp_pin: GPIO pin used for card write protect sending, or negative -+ * if not available. -+ * @detect_timer: Timer used for debouncing @detect_pin interrupts. -+ */ -+struct atmel_mci_slot { -+ struct mmc_host *mmc; -+ struct atmel_mci *host; -+ -+ u32 sdc_reg; -+ -+ struct mmc_request *mrq; -+ struct list_head queue_node; -+ -+ unsigned int clock; -+ unsigned long flags; -+#define ATMCI_CARD_PRESENT 0 -+#define ATMCI_CARD_NEED_INIT 1 -+#define ATMCI_SHUTDOWN 2 -+ -+ int detect_pin; -+ int wp_pin; -+ -+ struct timer_list detect_timer; - }; - --#define atmci_is_completed(host, event) \ -- test_bit(event, &host->completed_events) - #define atmci_test_and_clear_pending(host, event) \ - test_and_clear_bit(event, &host->pending_events) --#define atmci_test_and_set_completed(host, event) \ -- test_and_set_bit(event, &host->completed_events) - #define atmci_set_completed(host, event) \ - set_bit(event, &host->completed_events) - #define atmci_set_pending(host, event) \ - set_bit(event, &host->pending_events) --#define atmci_clear_pending(host, event) \ -- clear_bit(event, &host->pending_events) -+ -+/* -+ * The new MCI2 module isn't 100% compatible with the old MCI module, -+ * and it has a few nice features which we want to use... -+ */ -+static inline bool atmci_is_mci2(void) -+{ -+ if (cpu_is_at32ap7200()) -+ return true; -+ -+ return false; -+} - - /* - * The debugfs stuff below is mostly optimized away when -@@ -98,14 +227,15 @@ struct atmel_mci { - */ - static int atmci_req_show(struct seq_file *s, void *v) - { -- struct atmel_mci *host = s->private; -- struct mmc_request *mrq = host->mrq; -+ struct atmel_mci_slot *slot = s->private; -+ struct mmc_request *mrq; - struct mmc_command *cmd; - struct mmc_command *stop; - struct mmc_data *data; - - /* Make sure we get a consistent snapshot */ -- spin_lock_irq(&host->mmc->lock); -+ spin_lock_bh(&slot->host->lock); -+ mrq = slot->mrq; - - if (mrq) { - cmd = mrq->cmd; -@@ -130,7 +260,7 @@ static int atmci_req_show(struct seq_file *s, void *v) - stop->resp[2], stop->error); - } - -- spin_unlock_irq(&host->mmc->lock); -+ spin_unlock_bh(&slot->host->lock); - - return 0; - } -@@ -158,8 +288,15 @@ static void atmci_show_status_reg(struct seq_file *s, - [3] = "BLKE", - [4] = "DTIP", - [5] = "NOTBUSY", -+ [6] = "ENDRX", -+ [7] = "ENDTX", - [8] = "SDIOIRQA", - [9] = "SDIOIRQB", -+ [10] = "SDIOIRQC", -+ [11] = "SDIOIRQD", -+ [12] = "SDIOWAIT", -+ [14] = "RXBUFF", -+ [15] = "TXBUFE", - [16] = "RINDE", - [17] = "RDIRE", - [18] = "RCRCE", -@@ -167,6 +304,11 @@ static void atmci_show_status_reg(struct seq_file *s, - [20] = "RTOE", - [21] = "DCRCE", - [22] = "DTOE", -+ [23] = "CSTOE", -+ [24] = "BLKOVRE", -+ [25] = "DMADONE", -+ [26] = "FIFOEMPTY", -+ [27] = "XFRDONE", - [30] = "OVRE", - [31] = "UNRE", - }; -@@ -193,12 +335,16 @@ static int atmci_regs_show(struct seq_file *s, void *v) - if (!buf) - return -ENOMEM; - -- /* Grab a more or less consistent snapshot */ -- spin_lock_irq(&host->mmc->lock); -+ /* -+ * Grab a more or less consistent snapshot. Note that we're -+ * not disabling interrupts, so IMR and SR may not be -+ * consistent. -+ */ -+ spin_lock_bh(&host->lock); - clk_enable(host->mck); - memcpy_fromio(buf, host->regs, MCI_REGS_SIZE); - clk_disable(host->mck); -- spin_unlock_irq(&host->mmc->lock); -+ spin_unlock_bh(&host->lock); - - seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n", - buf[MCI_MR / 4], -@@ -236,13 +382,13 @@ static const struct file_operations atmci_regs_fops = { - .release = single_release, - }; - --static void atmci_init_debugfs(struct atmel_mci *host) -+static void atmci_init_debugfs(struct atmel_mci_slot *slot) - { -- struct mmc_host *mmc; -- struct dentry *root; -- struct dentry *node; -+ struct mmc_host *mmc = slot->mmc; -+ struct atmel_mci *host = slot->host; -+ struct dentry *root; -+ struct dentry *node; - -- mmc = host->mmc; - root = mmc->debugfs_root; - if (!root) - return; -@@ -254,7 +400,11 @@ static void atmci_init_debugfs(struct atmel_mci *host) - if (!node) - goto err; - -- node = debugfs_create_file("req", S_IRUSR, root, host, &atmci_req_fops); -+ node = debugfs_create_file("req", S_IRUSR, root, slot, &atmci_req_fops); -+ if (!node) -+ goto err; -+ -+ node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state); - if (!node) - goto err; - -@@ -271,25 +421,7 @@ static void atmci_init_debugfs(struct atmel_mci *host) - return; - - err: -- dev_err(&host->pdev->dev, -- "failed to initialize debugfs for controller\n"); --} -- --static void atmci_enable(struct atmel_mci *host) --{ -- clk_enable(host->mck); -- mci_writel(host, CR, MCI_CR_MCIEN); -- mci_writel(host, MR, host->mode_reg); -- mci_writel(host, SDCR, host->sdc_reg); --} -- --static void atmci_disable(struct atmel_mci *host) --{ -- mci_writel(host, CR, MCI_CR_SWRST); -- -- /* Stall until write is complete, then disable the bus clock */ -- mci_readl(host, SR); -- clk_disable(host->mck); -+ dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n"); - } - - static inline unsigned int ns_to_clocks(struct atmel_mci *host, -@@ -299,7 +431,7 @@ static inline unsigned int ns_to_clocks(struct atmel_mci *host, - } - - static void atmci_set_timeout(struct atmel_mci *host, -- struct mmc_data *data) -+ struct atmel_mci_slot *slot, struct mmc_data *data) - { - static unsigned dtomul_to_shift[] = { - 0, 4, 7, 8, 10, 12, 16, 20 -@@ -322,7 +454,7 @@ static void atmci_set_timeout(struct atmel_mci *host, - dtocyc = 15; - } - -- dev_vdbg(&host->mmc->class_dev, "setting timeout to %u cycles\n", -+ dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n", - dtocyc << dtomul_to_shift[dtomul]); - mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc))); - } -@@ -375,15 +507,12 @@ static u32 atmci_prepare_command(struct mmc_host *mmc, - } - - static void atmci_start_command(struct atmel_mci *host, -- struct mmc_command *cmd, -- u32 cmd_flags) -+ struct mmc_command *cmd, u32 cmd_flags) - { -- /* Must read host->cmd after testing event flags */ -- smp_rmb(); - WARN_ON(host->cmd); - host->cmd = cmd; - -- dev_vdbg(&host->mmc->class_dev, -+ dev_vdbg(&host->pdev->dev, - "start command: ARGR=0x%08x CMDR=0x%08x\n", - cmd->arg, cmd_flags); - -@@ -391,34 +520,172 @@ static void atmci_start_command(struct atmel_mci *host, - mci_writel(host, CMDR, cmd_flags); - } - --static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data) -+static void send_stop_cmd(struct atmel_mci *host, struct mmc_data *data) - { -- struct atmel_mci *host = mmc_priv(mmc); -- - atmci_start_command(host, data->stop, host->stop_cmdr); - mci_writel(host, IER, MCI_CMDRDY); - } - --static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq) -+#ifdef CONFIG_MMC_ATMELMCI_DMA -+static void atmci_dma_cleanup(struct atmel_mci *host) - { -- struct atmel_mci *host = mmc_priv(mmc); -+ struct mmc_data *data = host->data; - -- WARN_ON(host->cmd || host->data); -- host->mrq = NULL; -+ dma_unmap_sg(&host->pdev->dev, data->sg, data->sg_len, -+ ((data->flags & MMC_DATA_WRITE) -+ ? DMA_TO_DEVICE : DMA_FROM_DEVICE)); -+} -+ -+static void atmci_stop_dma(struct atmel_mci *host) -+{ -+ struct dma_chan *chan = host->data_chan; -+ -+ if (chan) { -+ chan->device->device_terminate_all(chan); -+ atmci_dma_cleanup(host); -+ } else { -+ /* Data transfer was stopped by the interrupt handler */ -+ atmci_set_pending(host, EVENT_XFER_COMPLETE); -+ mci_writel(host, IER, MCI_NOTBUSY); -+ } -+} -+ -+/* This function is called by the DMA driver from tasklet context. */ -+static void atmci_dma_complete(void *arg) -+{ -+ struct atmel_mci *host = arg; -+ struct mmc_data *data = host->data; -+ -+ dev_vdbg(&host->pdev->dev, "DMA complete\n"); -+ -+ atmci_dma_cleanup(host); -+ -+ /* -+ * If the card was removed, data will be NULL. No point trying -+ * to send the stop command or waiting for NBUSY in this case. -+ */ -+ if (data) { -+ atmci_set_pending(host, EVENT_XFER_COMPLETE); -+ tasklet_schedule(&host->tasklet); -+ -+ /* -+ * Regardless of what the documentation says, we have -+ * to wait for NOTBUSY even after block read -+ * operations. -+ * -+ * When the DMA transfer is complete, the controller -+ * may still be reading the CRC from the card, i.e. -+ * the data transfer is still in progress and we -+ * haven't seen all the potential error bits yet. -+ * -+ * The interrupt handler will schedule a different -+ * tasklet to finish things up when the data transfer -+ * is completely done. -+ * -+ * We may not complete the mmc request here anyway -+ * because the mmc layer may call back and cause us to -+ * violate the "don't submit new operations from the -+ * completion callback" rule of the dma engine -+ * framework. -+ */ -+ mci_writel(host, IER, MCI_NOTBUSY); -+ } -+} -+ -+static int -+atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) -+{ -+ struct dma_chan *chan; -+ struct dma_async_tx_descriptor *desc; -+ struct scatterlist *sg; -+ unsigned int i; -+ enum dma_data_direction direction; -+ -+ /* -+ * We don't do DMA on "complex" transfers, i.e. with -+ * non-word-aligned buffers or lengths. Also, we don't bother -+ * with all the DMA setup overhead for short transfers. -+ */ -+ if (data->blocks * data->blksz < ATMCI_DMA_THRESHOLD) -+ return -EINVAL; -+ if (data->blksz & 3) -+ return -EINVAL; -+ -+ for_each_sg(data->sg, sg, data->sg_len, i) { -+ if (sg->offset & 3 || sg->length & 3) -+ return -EINVAL; -+ } -+ -+ /* If we don't have a channel, we can't do DMA */ -+ chan = host->dma.chan; -+ if (chan) { -+ dma_chan_get(chan); -+ host->data_chan = chan; -+ } -+ -+ if (!chan) -+ return -ENODEV; -+ -+ if (atmci_is_mci2()) -+ mci_writel(host, DMA, MCI_DMAEN); -+ -+ if (data->flags & MMC_DATA_READ) -+ direction = DMA_FROM_DEVICE; -+ else -+ direction = DMA_TO_DEVICE; -+ -+ desc = chan->device->device_prep_slave_sg(chan, -+ data->sg, data->sg_len, direction, -+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK); -+ if (!desc) -+ return -ENOMEM; -+ -+ host->dma.data_desc = desc; -+ desc->callback = atmci_dma_complete; -+ desc->callback_param = host; -+ -+ return 0; -+} -+ -+static void atmci_submit_data(struct atmel_mci *host) -+{ -+ struct dma_chan *chan = host->data_chan; -+ struct dma_async_tx_descriptor *desc = host->dma.data_desc; -+ -+ if (chan) { -+ desc->tx_submit(desc); -+ chan->device->device_issue_pending(chan); -+ } -+} - -- atmci_disable(host); -+#else /* CONFIG_MMC_ATMELMCI_DMA */ - -- mmc_request_done(mmc, mrq); -+static int atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) -+{ -+ return -ENOSYS; - } - -+static void atmci_submit_data(struct atmel_mci *host) -+{ -+ -+} -+ -+static void atmci_stop_dma(struct atmel_mci *host) -+{ -+ /* Data transfer was stopped by the interrupt handler */ -+ atmci_set_pending(host, EVENT_XFER_COMPLETE); -+ mci_writel(host, IER, MCI_NOTBUSY); -+} -+ -+#endif /* CONFIG_MMC_ATMELMCI_DMA */ -+ - /* - * Returns a mask of interrupt flags to be enabled after the whole - * request has been prepared. - */ --static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data) -+static u32 atmci_prepare_data(struct atmel_mci *host, struct mmc_data *data) - { -- struct atmel_mci *host = mmc_priv(mmc); -- u32 iflags; -+ u32 iflags; - - data->error = -EINPROGRESS; - -@@ -426,77 +693,95 @@ static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data) - host->sg = NULL; - host->data = data; - -- dev_vdbg(&mmc->class_dev, "BLKR=0x%08x\n", -- MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz)); -- - iflags = ATMCI_DATA_ERROR_FLAGS; -- host->sg = data->sg; -- host->pio_offset = 0; -- if (data->flags & MMC_DATA_READ) -- iflags |= MCI_RXRDY; -- else -- iflags |= MCI_TXRDY; -+ if (atmci_prepare_data_dma(host, data)) { -+ if (atmci_is_mci2()) -+ mci_writel(host, DMA, 0); -+ host->data_chan = NULL; -+ -+ /* -+ * Errata: MMC data write operation with less than 12 -+ * bytes is impossible. -+ * -+ * Errata: MCI Transmit Data Register (TDR) FIFO -+ * corruption when length is not multiple of 4. -+ */ -+ if (data->blocks * data->blksz < 12 -+ || (data->blocks * data->blksz) & 3) -+ host->need_reset = true; -+ -+ host->sg = data->sg; -+ host->pio_offset = 0; -+ if (data->flags & MMC_DATA_READ) -+ iflags |= MCI_RXRDY; -+ else -+ iflags |= MCI_TXRDY; -+ } - - return iflags; - } - --static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) -+static void atmci_start_request(struct atmel_mci *host, -+ struct atmel_mci_slot *slot) - { -- struct atmel_mci *host = mmc_priv(mmc); -- struct mmc_data *data; -+ struct mmc_request *mrq; - struct mmc_command *cmd; -+ struct mmc_data *data; - u32 iflags; -- u32 cmdflags = 0; -+ u32 cmdflags; - -- iflags = mci_readl(host, IMR); -- if (iflags) -- dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n", -- mci_readl(host, IMR)); -+ mrq = slot->mrq; -+ host->cur_slot = slot; -+ host->mrq = mrq; - -- WARN_ON(host->mrq != NULL); -+ host->pending_events = 0; -+ host->completed_events = 0; -+ host->data_status = 0; - -- /* -- * We may "know" the card is gone even though there's still an -- * electrical connection. If so, we really need to communicate -- * this to the MMC core since there won't be any more -- * interrupts as the card is completely removed. Otherwise, -- * the MMC core might believe the card is still there even -- * though the card was just removed very slowly. -- */ -- if (!host->present) { -- mrq->cmd->error = -ENOMEDIUM; -- mmc_request_done(mmc, mrq); -- return; -+ if (host->need_reset) { -+ mci_writel(host, CR, MCI_CR_SWRST); -+ mci_writel(host, CR, MCI_CR_MCIEN); -+ mci_writel(host, MR, host->mode_reg); -+ host->need_reset = false; - } -+ mci_writel(host, SDCR, slot->sdc_reg); - -- host->mrq = mrq; -- host->pending_events = 0; -- host->completed_events = 0; -+ iflags = mci_readl(host, IMR); -+ if (iflags) -+ dev_warn(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n", -+ iflags); - -- atmci_enable(host); -+ if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) { -+ /* Send init sequence (74 clock cycles) */ -+ mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT); -+ while (!(mci_readl(host, SR) & MCI_CMDRDY)) -+ cpu_relax(); -+ } - -- /* We don't support multiple blocks of weird lengths. */ -+ iflags = 0; - data = mrq->data; - if (data) { -- if (data->blocks > 1 && data->blksz & 3) -- goto fail; -- atmci_set_timeout(host, data); -+ atmci_set_timeout(host, slot, data); - - /* Must set block count/size before sending command */ - mci_writel(host, BLKR, MCI_BCNT(data->blocks) - | MCI_BLKLEN(data->blksz)); -+ dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n", -+ MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz)); -+ -+ iflags |= atmci_prepare_data(host, data); - } - -- iflags = MCI_CMDRDY; -+ iflags |= MCI_CMDRDY; - cmd = mrq->cmd; -- cmdflags = atmci_prepare_command(mmc, cmd); -+ cmdflags = atmci_prepare_command(slot->mmc, cmd); - atmci_start_command(host, cmd, cmdflags); - - if (data) -- iflags |= atmci_submit_data(mmc, data); -+ atmci_submit_data(host); - - if (mrq->stop) { -- host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop); -+ host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop); - host->stop_cmdr |= MCI_CMDR_STOP_XFER; - if (!(data->flags & MMC_DATA_WRITE)) - host->stop_cmdr |= MCI_CMDR_TRDIR_READ; -@@ -513,59 +798,156 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) - * prepared yet.) - */ - mci_writel(host, IER, iflags); -+} - -- return; -+static void atmci_queue_request(struct atmel_mci *host, -+ struct atmel_mci_slot *slot, struct mmc_request *mrq) -+{ -+ dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n", -+ host->state); -+ -+ spin_lock_bh(&host->lock); -+ slot->mrq = mrq; -+ if (host->state == STATE_IDLE) { -+ host->state = STATE_SENDING_CMD; -+ atmci_start_request(host, slot); -+ } else { -+ list_add_tail(&slot->queue_node, &host->queue); -+ } -+ spin_unlock_bh(&host->lock); -+} - --fail: -- atmci_disable(host); -- host->mrq = NULL; -- mrq->cmd->error = -EINVAL; -- mmc_request_done(mmc, mrq); -+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) -+{ -+ struct atmel_mci_slot *slot = mmc_priv(mmc); -+ struct atmel_mci *host = slot->host; -+ struct mmc_data *data; -+ -+ WARN_ON(slot->mrq); -+ -+ /* -+ * We may "know" the card is gone even though there's still an -+ * electrical connection. If so, we really need to communicate -+ * this to the MMC core since there won't be any more -+ * interrupts as the card is completely removed. Otherwise, -+ * the MMC core might believe the card is still there even -+ * though the card was just removed very slowly. -+ */ -+ if (!test_bit(ATMCI_CARD_PRESENT, &slot->flags)) { -+ mrq->cmd->error = -ENOMEDIUM; -+ mmc_request_done(mmc, mrq); -+ return; -+ } -+ -+ /* We don't support multiple blocks of weird lengths. */ -+ data = mrq->data; -+ if (data && data->blocks > 1 && data->blksz & 3) { -+ mrq->cmd->error = -EINVAL; -+ mmc_request_done(mmc, mrq); -+ } -+ -+ atmci_queue_request(host, slot, mrq); - } - - static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) - { -- struct atmel_mci *host = mmc_priv(mmc); -+ struct atmel_mci_slot *slot = mmc_priv(mmc); -+ struct atmel_mci *host = slot->host; -+ unsigned int i; -+ -+ slot->sdc_reg &= ~MCI_SDCBUS_MASK; -+ switch (ios->bus_width) { -+ case MMC_BUS_WIDTH_1: -+ slot->sdc_reg |= MCI_SDCBUS_1BIT; -+ break; -+ case MMC_BUS_WIDTH_4: -+ slot->sdc_reg |= MCI_SDCBUS_4BIT; -+ break; -+ } - - if (ios->clock) { -+ unsigned int clock_min = ~0U; - u32 clkdiv; - -- /* Set clock rate */ -- clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * ios->clock) - 1; -+ spin_lock_bh(&host->lock); -+ if (!host->mode_reg) { -+ clk_enable(host->mck); -+ mci_writel(host, CR, MCI_CR_SWRST); -+ mci_writel(host, CR, MCI_CR_MCIEN); -+ } -+ -+ /* -+ * Use mirror of ios->clock to prevent race with mmc -+ * core ios update when finding the minimum. -+ */ -+ slot->clock = ios->clock; -+ for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { -+ if (host->slot[i] && host->slot[i]->clock -+ && host->slot[i]->clock < clock_min) -+ clock_min = host->slot[i]->clock; -+ } -+ -+ /* Calculate clock divider */ -+ clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1; - if (clkdiv > 255) { - dev_warn(&mmc->class_dev, - "clock %u too slow; using %lu\n", -- ios->clock, host->bus_hz / (2 * 256)); -+ clock_min, host->bus_hz / (2 * 256)); - clkdiv = 255; - } - -+ /* -+ * WRPROOF and RDPROOF prevent overruns/underruns by -+ * stopping the clock when the FIFO is full/empty. -+ * This state is not expected to last for long. -+ */ - host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF - | MCI_MR_RDPROOF; -- } - -- switch (ios->bus_width) { -- case MMC_BUS_WIDTH_1: -- host->sdc_reg = 0; -- break; -- case MMC_BUS_WIDTH_4: -- host->sdc_reg = MCI_SDCBUS_4BIT; -- break; -+ if (list_empty(&host->queue)) -+ mci_writel(host, MR, host->mode_reg); -+ else -+ host->need_clock_update = true; -+ -+ spin_unlock_bh(&host->lock); -+ } else { -+ bool any_slot_active = false; -+ -+ spin_lock_bh(&host->lock); -+ slot->clock = 0; -+ for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { -+ if (host->slot[i] && host->slot[i]->clock) { -+ any_slot_active = true; -+ break; -+ } -+ } -+ if (!any_slot_active) { -+ mci_writel(host, CR, MCI_CR_MCIDIS); -+ if (host->mode_reg) { -+ mci_readl(host, MR); -+ clk_disable(host->mck); -+ } -+ host->mode_reg = 0; -+ } -+ spin_unlock_bh(&host->lock); - } - - switch (ios->power_mode) { -- case MMC_POWER_ON: -- /* Send init sequence (74 clock cycles) */ -- atmci_enable(host); -- mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT); -- while (!(mci_readl(host, SR) & MCI_CMDRDY)) -- cpu_relax(); -- atmci_disable(host); -+ case MMC_POWER_UP: -+ set_bit(ATMCI_CARD_NEED_INIT, &slot->flags); - break; - default: - /* - * TODO: None of the currently available AVR32-based - * boards allow MMC power to be turned off. Implement - * power control when this can be tested properly. -+ * -+ * We also need to hook this into the clock management -+ * somehow so that newly inserted cards aren't -+ * subjected to a fast clock before we have a chance -+ * to figure out what the maximum rate is. Currently, -+ * there's no way to avoid this, and there never will -+ * be for boards that don't support power control. - */ - break; - } -@@ -573,31 +955,82 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) - - static int atmci_get_ro(struct mmc_host *mmc) - { -- int read_only = 0; -- struct atmel_mci *host = mmc_priv(mmc); -+ int read_only = -ENOSYS; -+ struct atmel_mci_slot *slot = mmc_priv(mmc); - -- if (gpio_is_valid(host->wp_pin)) { -- read_only = gpio_get_value(host->wp_pin); -+ if (gpio_is_valid(slot->wp_pin)) { -+ read_only = gpio_get_value(slot->wp_pin); - dev_dbg(&mmc->class_dev, "card is %s\n", - read_only ? "read-only" : "read-write"); -- } else { -- dev_dbg(&mmc->class_dev, -- "no pin for checking read-only switch." -- " Assuming write-enable.\n"); - } - - return read_only; - } - --static struct mmc_host_ops atmci_ops = { -+static int atmci_get_cd(struct mmc_host *mmc) -+{ -+ int present = -ENOSYS; -+ struct atmel_mci_slot *slot = mmc_priv(mmc); -+ -+ if (gpio_is_valid(slot->detect_pin)) { -+ present = !gpio_get_value(slot->detect_pin); -+ dev_dbg(&mmc->class_dev, "card is %spresent\n", -+ present ? "" : "not "); -+ } -+ -+ return present; -+} -+ -+static const struct mmc_host_ops atmci_ops = { - .request = atmci_request, - .set_ios = atmci_set_ios, - .get_ro = atmci_get_ro, -+ .get_cd = atmci_get_cd, - }; - -+/* Called with host->lock held */ -+static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq) -+ __releases(&host->lock) -+ __acquires(&host->lock) -+{ -+ struct atmel_mci_slot *slot = NULL; -+ struct mmc_host *prev_mmc = host->cur_slot->mmc; -+ -+ WARN_ON(host->cmd || host->data); -+ -+ /* -+ * Update the MMC clock rate if necessary. This may be -+ * necessary if set_ios() is called when a different slot is -+ * busy transfering data. -+ */ -+ if (host->need_clock_update) -+ mci_writel(host, MR, host->mode_reg); -+ -+ host->cur_slot->mrq = NULL; -+ host->mrq = NULL; -+ if (!list_empty(&host->queue)) { -+ slot = list_entry(host->queue.next, -+ struct atmel_mci_slot, queue_node); -+ list_del(&slot->queue_node); -+ dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n", -+ mmc_hostname(slot->mmc)); -+ host->state = STATE_SENDING_CMD; -+ atmci_start_request(host, slot); -+ } else { -+ dev_vdbg(&host->pdev->dev, "list empty\n"); -+ host->state = STATE_IDLE; -+ } -+ -+ spin_unlock(&host->lock); -+ mmc_request_done(prev_mmc, mrq); -+ spin_lock(&host->lock); -+} -+ - static void atmci_command_complete(struct atmel_mci *host, -- struct mmc_command *cmd, u32 status) -+ struct mmc_command *cmd) - { -+ u32 status = host->cmd_status; -+ - /* Read the response from the card (up to 16 bytes) */ - cmd->resp[0] = mci_readl(host, RSPR); - cmd->resp[1] = mci_readl(host, RSPR); -@@ -614,11 +1047,12 @@ static void atmci_command_complete(struct atmel_mci *host, - cmd->error = 0; - - if (cmd->error) { -- dev_dbg(&host->mmc->class_dev, -+ dev_dbg(&host->pdev->dev, - "command error: status=0x%08x\n", status); - - if (cmd->data) { - host->data = NULL; -+ atmci_stop_dma(host); - mci_writel(host, IDR, MCI_NOTBUSY - | MCI_TXRDY | MCI_RXRDY - | ATMCI_DATA_ERROR_FLAGS); -@@ -628,146 +1062,222 @@ static void atmci_command_complete(struct atmel_mci *host, - - static void atmci_detect_change(unsigned long data) - { -- struct atmel_mci *host = (struct atmel_mci *)data; -- struct mmc_request *mrq = host->mrq; -- int present; -+ struct atmel_mci_slot *slot = (struct atmel_mci_slot *)data; -+ bool present; -+ bool present_old; - - /* -- * atmci_remove() sets detect_pin to -1 before freeing the -- * interrupt. We must not re-enable the interrupt if it has -- * been freed. -+ * atmci_cleanup_slot() sets the ATMCI_SHUTDOWN flag before -+ * freeing the interrupt. We must not re-enable the interrupt -+ * if it has been freed, and if we're shutting down, it -+ * doesn't really matter whether the card is present or not. - */ - smp_rmb(); -- if (!gpio_is_valid(host->detect_pin)) -+ if (test_bit(ATMCI_SHUTDOWN, &slot->flags)) - return; - -- enable_irq(gpio_to_irq(host->detect_pin)); -- present = !gpio_get_value(host->detect_pin); -+ enable_irq(gpio_to_irq(slot->detect_pin)); -+ present = !gpio_get_value(slot->detect_pin); -+ present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags); -+ -+ dev_vdbg(&slot->mmc->class_dev, "detect change: %d (was %d)\n", -+ present, present_old); - -- dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n", -- present, host->present); -+ if (present != present_old) { -+ struct atmel_mci *host = slot->host; -+ struct mmc_request *mrq; - -- if (present != host->present) { -- dev_dbg(&host->mmc->class_dev, "card %s\n", -+ dev_dbg(&slot->mmc->class_dev, "card %s\n", - present ? "inserted" : "removed"); -- host->present = present; - -- /* Reset controller if card is gone */ -- if (!present) { -- mci_writel(host, CR, MCI_CR_SWRST); -- mci_writel(host, IDR, ~0UL); -- mci_writel(host, CR, MCI_CR_MCIEN); -- } -+ spin_lock(&host->lock); -+ -+ if (!present) -+ clear_bit(ATMCI_CARD_PRESENT, &slot->flags); -+ else -+ set_bit(ATMCI_CARD_PRESENT, &slot->flags); - - /* Clean up queue if present */ -+ mrq = slot->mrq; - if (mrq) { -- /* -- * Reset controller to terminate any ongoing -- * commands or data transfers. -- */ -- mci_writel(host, CR, MCI_CR_SWRST); -+ if (mrq == host->mrq) { -+ /* -+ * Reset controller to terminate any ongoing -+ * commands or data transfers. -+ */ -+ mci_writel(host, CR, MCI_CR_SWRST); -+ mci_writel(host, CR, MCI_CR_MCIEN); -+ mci_writel(host, MR, host->mode_reg); - -- if (!atmci_is_completed(host, EVENT_CMD_COMPLETE)) -- mrq->cmd->error = -ENOMEDIUM; -- -- if (mrq->data && !atmci_is_completed(host, -- EVENT_DATA_COMPLETE)) { - host->data = NULL; -- mrq->data->error = -ENOMEDIUM; -+ host->cmd = NULL; -+ -+ switch (host->state) { -+ case STATE_IDLE: -+ break; -+ case STATE_SENDING_CMD: -+ mrq->cmd->error = -ENOMEDIUM; -+ if (!mrq->data) -+ break; -+ /* fall through */ -+ case STATE_SENDING_DATA: -+ mrq->data->error = -ENOMEDIUM; -+ atmci_stop_dma(host); -+ break; -+ case STATE_DATA_BUSY: -+ case STATE_DATA_ERROR: -+ if (mrq->data->error == -EINPROGRESS) -+ mrq->data->error = -ENOMEDIUM; -+ if (!mrq->stop) -+ break; -+ /* fall through */ -+ case STATE_SENDING_STOP: -+ mrq->stop->error = -ENOMEDIUM; -+ break; -+ } -+ -+ atmci_request_end(host, mrq); -+ } else { -+ list_del(&slot->queue_node); -+ mrq->cmd->error = -ENOMEDIUM; -+ if (mrq->data) -+ mrq->data->error = -ENOMEDIUM; -+ if (mrq->stop) -+ mrq->stop->error = -ENOMEDIUM; -+ -+ spin_unlock(&host->lock); -+ mmc_request_done(slot->mmc, mrq); -+ spin_lock(&host->lock); - } -- if (mrq->stop && !atmci_is_completed(host, -- EVENT_STOP_COMPLETE)) -- mrq->stop->error = -ENOMEDIUM; -- -- host->cmd = NULL; -- atmci_request_end(host->mmc, mrq); - } -+ spin_unlock(&host->lock); - -- mmc_detect_change(host->mmc, 0); -+ mmc_detect_change(slot->mmc, 0); - } - } - - static void atmci_tasklet_func(unsigned long priv) - { -- struct mmc_host *mmc = (struct mmc_host *)priv; -- struct atmel_mci *host = mmc_priv(mmc); -+ struct atmel_mci *host = (struct atmel_mci *)priv; - struct mmc_request *mrq = host->mrq; - struct mmc_data *data = host->data; -+ struct mmc_command *cmd = host->cmd; -+ enum atmel_mci_state state = host->state; -+ enum atmel_mci_state prev_state; -+ u32 status; -+ -+ spin_lock(&host->lock); - -- dev_vdbg(&mmc->class_dev, -- "tasklet: pending/completed/mask %lx/%lx/%x\n", -- host->pending_events, host->completed_events, -+ state = host->state; -+ -+ dev_vdbg(&host->pdev->dev, -+ "tasklet: state %u pending/completed/mask %lx/%lx/%x\n", -+ state, host->pending_events, host->completed_events, - mci_readl(host, IMR)); - -- if (atmci_test_and_clear_pending(host, EVENT_CMD_COMPLETE)) { -- /* -- * host->cmd must be set to NULL before the interrupt -- * handler sees EVENT_CMD_COMPLETE -- */ -- host->cmd = NULL; -- smp_wmb(); -- atmci_set_completed(host, EVENT_CMD_COMPLETE); -- atmci_command_complete(host, mrq->cmd, host->cmd_status); -- -- if (!mrq->cmd->error && mrq->stop -- && atmci_is_completed(host, EVENT_XFER_COMPLETE) -- && !atmci_test_and_set_completed(host, -- EVENT_STOP_SENT)) -- send_stop_cmd(host->mmc, mrq->data); -- } -- if (atmci_test_and_clear_pending(host, EVENT_STOP_COMPLETE)) { -- /* -- * host->cmd must be set to NULL before the interrupt -- * handler sees EVENT_STOP_COMPLETE -- */ -- host->cmd = NULL; -- smp_wmb(); -- atmci_set_completed(host, EVENT_STOP_COMPLETE); -- atmci_command_complete(host, mrq->stop, host->stop_status); -- } -- if (atmci_test_and_clear_pending(host, EVENT_DATA_ERROR)) { -- u32 status = host->data_status; -+ do { -+ prev_state = state; - -- dev_vdbg(&mmc->class_dev, "data error: status=%08x\n", status); -+ switch (state) { -+ case STATE_IDLE: -+ break; - -- atmci_set_completed(host, EVENT_DATA_ERROR); -- atmci_set_completed(host, EVENT_DATA_COMPLETE); -+ case STATE_SENDING_CMD: -+ if (!atmci_test_and_clear_pending(host, -+ EVENT_CMD_COMPLETE)) -+ break; - -- if (status & MCI_DTOE) { -- dev_dbg(&mmc->class_dev, -- "data timeout error\n"); -- data->error = -ETIMEDOUT; -- } else if (status & MCI_DCRCE) { -- dev_dbg(&mmc->class_dev, "data CRC error\n"); -- data->error = -EILSEQ; -- } else { -- dev_dbg(&mmc->class_dev, -- "data FIFO error (status=%08x)\n", -- status); -- data->error = -EIO; -- } -+ host->cmd = NULL; -+ atmci_set_completed(host, EVENT_CMD_COMPLETE); -+ atmci_command_complete(host, mrq->cmd); -+ if (!mrq->data || cmd->error) { -+ atmci_request_end(host, host->mrq); -+ goto unlock; -+ } -+ -+ prev_state = state = STATE_SENDING_DATA; -+ /* fall through */ -+ -+ case STATE_SENDING_DATA: -+ if (atmci_test_and_clear_pending(host, -+ EVENT_DATA_ERROR)) { -+ atmci_stop_dma(host); -+ if (data->stop) -+ send_stop_cmd(host, data); -+ state = STATE_DATA_ERROR; -+ break; -+ } - -- if (host->present && data->stop -- && atmci_is_completed(host, EVENT_CMD_COMPLETE) -- && !atmci_test_and_set_completed( -- host, EVENT_STOP_SENT)) -- send_stop_cmd(host->mmc, data); -+ if (!atmci_test_and_clear_pending(host, -+ EVENT_XFER_COMPLETE)) -+ break; - -- host->data = NULL; -- } -- if (atmci_test_and_clear_pending(host, EVENT_DATA_COMPLETE)) { -- atmci_set_completed(host, EVENT_DATA_COMPLETE); -+ atmci_set_completed(host, EVENT_XFER_COMPLETE); -+ prev_state = state = STATE_DATA_BUSY; -+ /* fall through */ -+ -+ case STATE_DATA_BUSY: -+ if (!atmci_test_and_clear_pending(host, -+ EVENT_DATA_COMPLETE)) -+ break; -+ -+ host->data = NULL; -+ atmci_set_completed(host, EVENT_DATA_COMPLETE); -+ status = host->data_status; -+ if (unlikely(status & ATMCI_DATA_ERROR_FLAGS)) { -+ if (status & MCI_DTOE) { -+ dev_dbg(&host->pdev->dev, -+ "data timeout error\n"); -+ data->error = -ETIMEDOUT; -+ } else if (status & MCI_DCRCE) { -+ dev_dbg(&host->pdev->dev, -+ "data CRC error\n"); -+ data->error = -EILSEQ; -+ } else { -+ dev_dbg(&host->pdev->dev, -+ "data FIFO error (status=%08x)\n", -+ status); -+ data->error = -EIO; -+ } -+ } else { -+ data->bytes_xfered = data->blocks * data->blksz; -+ data->error = 0; -+ } -+ -+ if (!data->stop) { -+ atmci_request_end(host, host->mrq); -+ goto unlock; -+ } -+ -+ prev_state = state = STATE_SENDING_STOP; -+ if (!data->error) -+ send_stop_cmd(host, data); -+ /* fall through */ -+ -+ case STATE_SENDING_STOP: -+ if (!atmci_test_and_clear_pending(host, -+ EVENT_CMD_COMPLETE)) -+ break; -+ -+ host->cmd = NULL; -+ atmci_command_complete(host, mrq->stop); -+ atmci_request_end(host, host->mrq); -+ goto unlock; -+ -+ case STATE_DATA_ERROR: -+ if (!atmci_test_and_clear_pending(host, -+ EVENT_XFER_COMPLETE)) -+ break; - -- if (!atmci_is_completed(host, EVENT_DATA_ERROR)) { -- data->bytes_xfered = data->blocks * data->blksz; -- data->error = 0; -+ state = STATE_DATA_BUSY; -+ break; - } -+ } while (state != prev_state); - -- host->data = NULL; -- } -+ host->state = state; - -- if (host->mrq && !host->cmd && !host->data) -- atmci_request_end(mmc, host->mrq); -+unlock: -+ spin_unlock(&host->lock); - } - - static void atmci_read_data_pio(struct atmel_mci *host) -@@ -789,6 +1299,7 @@ static void atmci_read_data_pio(struct atmel_mci *host) - nbytes += 4; - - if (offset == sg->length) { -+ flush_dcache_page(sg_page(sg)); - host->sg = sg = sg_next(sg); - if (!sg) - goto done; -@@ -817,9 +1328,11 @@ static void atmci_read_data_pio(struct atmel_mci *host) - mci_writel(host, IDR, (MCI_NOTBUSY | MCI_RXRDY - | ATMCI_DATA_ERROR_FLAGS)); - host->data_status = status; -+ data->bytes_xfered += nbytes; -+ smp_wmb(); - atmci_set_pending(host, EVENT_DATA_ERROR); - tasklet_schedule(&host->tasklet); -- break; -+ return; - } - } while (status & MCI_RXRDY); - -@@ -832,10 +1345,8 @@ done: - mci_writel(host, IDR, MCI_RXRDY); - mci_writel(host, IER, MCI_NOTBUSY); - data->bytes_xfered += nbytes; -- atmci_set_completed(host, EVENT_XFER_COMPLETE); -- if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE) -- && !atmci_test_and_set_completed(host, EVENT_STOP_SENT)) -- send_stop_cmd(host->mmc, data); -+ smp_wmb(); -+ atmci_set_pending(host, EVENT_XFER_COMPLETE); - } - - static void atmci_write_data_pio(struct atmel_mci *host) -@@ -888,9 +1399,11 @@ static void atmci_write_data_pio(struct atmel_mci *host) - mci_writel(host, IDR, (MCI_NOTBUSY | MCI_TXRDY - | ATMCI_DATA_ERROR_FLAGS)); - host->data_status = status; -+ data->bytes_xfered += nbytes; -+ smp_wmb(); - atmci_set_pending(host, EVENT_DATA_ERROR); - tasklet_schedule(&host->tasklet); -- break; -+ return; - } - } while (status & MCI_TXRDY); - -@@ -903,38 +1416,26 @@ done: - mci_writel(host, IDR, MCI_TXRDY); - mci_writel(host, IER, MCI_NOTBUSY); - data->bytes_xfered += nbytes; -- atmci_set_completed(host, EVENT_XFER_COMPLETE); -- if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE) -- && !atmci_test_and_set_completed(host, EVENT_STOP_SENT)) -- send_stop_cmd(host->mmc, data); -+ smp_wmb(); -+ atmci_set_pending(host, EVENT_XFER_COMPLETE); - } - --static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status) -+static void atmci_cmd_interrupt(struct atmel_mci *host, u32 status) - { -- struct atmel_mci *host = mmc_priv(mmc); -- - mci_writel(host, IDR, MCI_CMDRDY); - -- if (atmci_is_completed(host, EVENT_STOP_SENT)) { -- host->stop_status = status; -- atmci_set_pending(host, EVENT_STOP_COMPLETE); -- } else { -- host->cmd_status = status; -- atmci_set_pending(host, EVENT_CMD_COMPLETE); -- } -- -+ host->cmd_status = status; -+ smp_wmb(); -+ atmci_set_pending(host, EVENT_CMD_COMPLETE); - tasklet_schedule(&host->tasklet); - } - - static irqreturn_t atmci_interrupt(int irq, void *dev_id) - { -- struct mmc_host *mmc = dev_id; -- struct atmel_mci *host = mmc_priv(mmc); -+ struct atmel_mci *host = dev_id; - u32 status, mask, pending; - unsigned int pass_count = 0; - -- spin_lock(&mmc->lock); -- - do { - status = mci_readl(host, SR); - mask = mci_readl(host, IMR); -@@ -946,13 +1447,18 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) - mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS - | MCI_RXRDY | MCI_TXRDY); - pending &= mci_readl(host, IMR); -+ - host->data_status = status; -+ smp_wmb(); - atmci_set_pending(host, EVENT_DATA_ERROR); - tasklet_schedule(&host->tasklet); - } - if (pending & MCI_NOTBUSY) { -- mci_writel(host, IDR, (MCI_NOTBUSY -- | ATMCI_DATA_ERROR_FLAGS)); -+ mci_writel(host, IDR, -+ ATMCI_DATA_ERROR_FLAGS | MCI_NOTBUSY); -+ if (!host->data_status) -+ host->data_status = status; -+ smp_wmb(); - atmci_set_pending(host, EVENT_DATA_COMPLETE); - tasklet_schedule(&host->tasklet); - } -@@ -962,18 +1468,15 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) - atmci_write_data_pio(host); - - if (pending & MCI_CMDRDY) -- atmci_cmd_interrupt(mmc, status); -+ atmci_cmd_interrupt(host, status); - } while (pass_count++ < 5); - -- spin_unlock(&mmc->lock); -- - return pass_count ? IRQ_HANDLED : IRQ_NONE; - } - - static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id) - { -- struct mmc_host *mmc = dev_id; -- struct atmel_mci *host = mmc_priv(mmc); -+ struct atmel_mci_slot *slot = dev_id; - - /* - * Disable interrupts until the pin has stabilized and check -@@ -981,19 +1484,176 @@ static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id) - * middle of the timer routine when this interrupt triggers. - */ - disable_irq_nosync(irq); -- mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20)); -+ mod_timer(&slot->detect_timer, jiffies + msecs_to_jiffies(20)); - - return IRQ_HANDLED; - } - -+#ifdef CONFIG_MMC_ATMELMCI_DMA -+ -+static inline struct atmel_mci * -+dma_client_to_atmel_mci(struct dma_client *client) -+{ -+ return container_of(client, struct atmel_mci, dma.client); -+} -+ -+static enum dma_state_client atmci_dma_event(struct dma_client *client, -+ struct dma_chan *chan, enum dma_state state) -+{ -+ struct atmel_mci *host; -+ enum dma_state_client ret = DMA_NAK; -+ -+ host = dma_client_to_atmel_mci(client); -+ -+ switch (state) { -+ case DMA_RESOURCE_AVAILABLE: -+ spin_lock_bh(&host->lock); -+ if (!host->dma.chan) { -+ host->dma.chan = chan; -+ ret = DMA_ACK; -+ } -+ spin_unlock_bh(&host->lock); -+ -+ if (ret == DMA_ACK) -+ dev_info(&host->pdev->dev, -+ "Using %s for DMA transfers\n", -+ chan->dev.bus_id); -+ break; -+ -+ case DMA_RESOURCE_REMOVED: -+ spin_lock_bh(&host->lock); -+ if (host->dma.chan == chan) { -+ host->dma.chan = NULL; -+ ret = DMA_ACK; -+ } -+ spin_unlock_bh(&host->lock); -+ -+ if (ret == DMA_ACK) -+ dev_info(&host->pdev->dev, -+ "Lost %s, falling back to PIO\n", -+ chan->dev.bus_id); -+ break; -+ -+ default: -+ break; -+ } -+ -+ -+ return ret; -+} -+#endif /* CONFIG_MMC_ATMELMCI_DMA */ -+ -+static int __init atmci_init_slot(struct atmel_mci *host, -+ struct mci_slot_pdata *slot_data, unsigned int id, -+ u32 sdc_reg) -+{ -+ struct mmc_host *mmc; -+ struct atmel_mci_slot *slot; -+ -+ mmc = mmc_alloc_host(sizeof(struct atmel_mci_slot), &host->pdev->dev); -+ if (!mmc) -+ return -ENOMEM; -+ -+ slot = mmc_priv(mmc); -+ slot->mmc = mmc; -+ slot->host = host; -+ slot->detect_pin = slot_data->detect_pin; -+ slot->wp_pin = slot_data->wp_pin; -+ slot->sdc_reg = sdc_reg; -+ -+ mmc->ops = &atmci_ops; -+ mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512); -+ mmc->f_max = host->bus_hz / 2; -+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; -+ if (slot_data->bus_width >= 4) -+ mmc->caps |= MMC_CAP_4_BIT_DATA; -+ -+ mmc->max_hw_segs = 64; -+ mmc->max_phys_segs = 64; -+ mmc->max_req_size = 32768 * 512; -+ mmc->max_blk_size = 32768; -+ mmc->max_blk_count = 512; -+ -+ /* Assume card is present initially */ -+ set_bit(ATMCI_CARD_PRESENT, &slot->flags); -+ if (gpio_is_valid(slot->detect_pin)) { -+ if (gpio_request(slot->detect_pin, "mmc_detect")) { -+ dev_dbg(&mmc->class_dev, "no detect pin available\n"); -+ slot->detect_pin = -EBUSY; -+ } else if (gpio_get_value(slot->detect_pin)) { -+ clear_bit(ATMCI_CARD_PRESENT, &slot->flags); -+ } -+ } -+ -+ if (!gpio_is_valid(slot->detect_pin)) -+ mmc->caps |= MMC_CAP_NEEDS_POLL; -+ -+ if (gpio_is_valid(slot->wp_pin)) { -+ if (gpio_request(slot->wp_pin, "mmc_wp")) { -+ dev_dbg(&mmc->class_dev, "no WP pin available\n"); -+ slot->wp_pin = -EBUSY; -+ } -+ } -+ -+ host->slot[id] = slot; -+ mmc_add_host(mmc); -+ -+ if (gpio_is_valid(slot->detect_pin)) { -+ int ret; -+ -+ setup_timer(&slot->detect_timer, atmci_detect_change, -+ (unsigned long)slot); -+ -+ ret = request_irq(gpio_to_irq(slot->detect_pin), -+ atmci_detect_interrupt, -+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, -+ "mmc-detect", slot); -+ if (ret) { -+ dev_dbg(&mmc->class_dev, -+ "could not request IRQ %d for detect pin\n", -+ gpio_to_irq(slot->detect_pin)); -+ gpio_free(slot->detect_pin); -+ slot->detect_pin = -EBUSY; -+ } -+ } -+ -+ atmci_init_debugfs(slot); -+ -+ return 0; -+} -+ -+static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot, -+ unsigned int id) -+{ -+ /* Debugfs stuff is cleaned up by mmc core */ -+ -+ set_bit(ATMCI_SHUTDOWN, &slot->flags); -+ smp_wmb(); -+ -+ mmc_remove_host(slot->mmc); -+ -+ if (gpio_is_valid(slot->detect_pin)) { -+ int pin = slot->detect_pin; -+ -+ free_irq(gpio_to_irq(pin), slot); -+ del_timer_sync(&slot->detect_timer); -+ gpio_free(pin); -+ } -+ if (gpio_is_valid(slot->wp_pin)) -+ gpio_free(slot->wp_pin); -+ -+ slot->host->slot[id] = NULL; -+ mmc_free_host(slot->mmc); -+} -+ - static int __init atmci_probe(struct platform_device *pdev) - { - struct mci_platform_data *pdata; -- struct atmel_mci *host; -- struct mmc_host *mmc; -- struct resource *regs; -- int irq; -- int ret; -+ struct atmel_mci *host; -+ struct resource *regs; -+ unsigned int nr_slots; -+ int irq; -+ int ret; - - regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!regs) -@@ -1005,15 +1665,13 @@ static int __init atmci_probe(struct platform_device *pdev) - if (irq < 0) - return irq; - -- mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev); -- if (!mmc) -+ host = kzalloc(sizeof(struct atmel_mci), GFP_KERNEL); -+ if (!host) - return -ENOMEM; - -- host = mmc_priv(mmc); - host->pdev = pdev; -- host->mmc = mmc; -- host->detect_pin = pdata->detect_pin; -- host->wp_pin = pdata->wp_pin; -+ spin_lock_init(&host->lock); -+ INIT_LIST_HEAD(&host->queue); - - host->mck = clk_get(&pdev->dev, "mci_clk"); - if (IS_ERR(host->mck)) { -@@ -1033,122 +1691,102 @@ static int __init atmci_probe(struct platform_device *pdev) - - host->mapbase = regs->start; - -- mmc->ops = &atmci_ops; -- mmc->f_min = (host->bus_hz + 511) / 512; -- mmc->f_max = host->bus_hz / 2; -- mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; -- mmc->caps |= MMC_CAP_4_BIT_DATA; -+ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)host); - -- mmc->max_hw_segs = 64; -- mmc->max_phys_segs = 64; -- mmc->max_req_size = 32768 * 512; -- mmc->max_blk_size = 32768; -- mmc->max_blk_count = 512; -- -- tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc); -- -- ret = request_irq(irq, atmci_interrupt, 0, pdev->dev.bus_id, mmc); -+ ret = request_irq(irq, atmci_interrupt, 0, pdev->dev.bus_id, host); - if (ret) - goto err_request_irq; - -- /* Assume card is present if we don't have a detect pin */ -- host->present = 1; -- if (gpio_is_valid(host->detect_pin)) { -- if (gpio_request(host->detect_pin, "mmc_detect")) { -- dev_dbg(&mmc->class_dev, "no detect pin available\n"); -- host->detect_pin = -1; -- } else { -- host->present = !gpio_get_value(host->detect_pin); -- } -- } -+#ifdef CONFIG_MMC_ATMELMCI_DMA -+ if (pdata->dma_slave) { -+ struct dma_slave *slave = pdata->dma_slave; - -- if (!gpio_is_valid(host->detect_pin)) -- mmc->caps |= MMC_CAP_NEEDS_POLL; -+ slave->tx_reg = regs->start + MCI_TDR; -+ slave->rx_reg = regs->start + MCI_RDR; - -- if (gpio_is_valid(host->wp_pin)) { -- if (gpio_request(host->wp_pin, "mmc_wp")) { -- dev_dbg(&mmc->class_dev, "no WP pin available\n"); -- host->wp_pin = -1; -- } -+ /* Try to grab a DMA channel */ -+ host->dma.client.event_callback = atmci_dma_event; -+ dma_cap_set(DMA_SLAVE, host->dma.client.cap_mask); -+ host->dma.client.slave = slave; -+ -+ dma_async_client_register(&host->dma.client); -+ dma_async_client_chan_request(&host->dma.client); -+ } else { -+ dev_notice(&pdev->dev, "DMA not available, using PIO\n"); - } -+#endif /* CONFIG_MMC_ATMELMCI_DMA */ - - platform_set_drvdata(pdev, host); - -- mmc_add_host(mmc); -- -- if (gpio_is_valid(host->detect_pin)) { -- setup_timer(&host->detect_timer, atmci_detect_change, -- (unsigned long)host); -- -- ret = request_irq(gpio_to_irq(host->detect_pin), -- atmci_detect_interrupt, -- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, -- "mmc-detect", mmc); -- if (ret) { -- dev_dbg(&mmc->class_dev, -- "could not request IRQ %d for detect pin\n", -- gpio_to_irq(host->detect_pin)); -- gpio_free(host->detect_pin); -- host->detect_pin = -1; -- } -+ /* We need at least one slot to succeed */ -+ nr_slots = 0; -+ ret = -ENODEV; -+ if (pdata->slot[0].bus_width) { -+ ret = atmci_init_slot(host, &pdata->slot[0], -+ MCI_SDCSEL_SLOT_A, 0); -+ if (!ret) -+ nr_slots++; -+ } -+ if (pdata->slot[1].bus_width) { -+ ret = atmci_init_slot(host, &pdata->slot[1], -+ MCI_SDCSEL_SLOT_B, 1); -+ if (!ret) -+ nr_slots++; - } - -- dev_info(&mmc->class_dev, -- "Atmel MCI controller at 0x%08lx irq %d\n", -- host->mapbase, irq); -+ if (!nr_slots) -+ goto err_init_slot; - -- atmci_init_debugfs(host); -+ dev_info(&pdev->dev, -+ "Atmel MCI controller at 0x%08lx irq %d, %u slots\n", -+ host->mapbase, irq, nr_slots); - - return 0; - -+err_init_slot: -+#ifdef CONFIG_MMC_ATMELMCI_DMA -+ if (pdata->dma_slave) -+ dma_async_client_unregister(&host->dma.client); -+#endif -+ free_irq(irq, host); - err_request_irq: - iounmap(host->regs); - err_ioremap: - clk_put(host->mck); - err_clk_get: -- mmc_free_host(mmc); -+ kfree(host); - return ret; - } - - static int __exit atmci_remove(struct platform_device *pdev) - { -- struct atmel_mci *host = platform_get_drvdata(pdev); -+ struct atmel_mci *host = platform_get_drvdata(pdev); -+ unsigned int i; - - platform_set_drvdata(pdev, NULL); - -- if (host) { -- /* Debugfs stuff is cleaned up by mmc core */ -- -- if (gpio_is_valid(host->detect_pin)) { -- int pin = host->detect_pin; -- -- /* Make sure the timer doesn't enable the interrupt */ -- host->detect_pin = -1; -- smp_wmb(); -- -- free_irq(gpio_to_irq(pin), host->mmc); -- del_timer_sync(&host->detect_timer); -- gpio_free(pin); -- } -- -- mmc_remove_host(host->mmc); -+ for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { -+ if (host->slot[i]) -+ atmci_cleanup_slot(host->slot[i], i); -+ } - -- clk_enable(host->mck); -- mci_writel(host, IDR, ~0UL); -- mci_writel(host, CR, MCI_CR_MCIDIS); -- mci_readl(host, SR); -- clk_disable(host->mck); -+ clk_enable(host->mck); -+ mci_writel(host, IDR, ~0UL); -+ mci_writel(host, CR, MCI_CR_MCIDIS); -+ mci_readl(host, SR); -+ clk_disable(host->mck); - -- if (gpio_is_valid(host->wp_pin)) -- gpio_free(host->wp_pin); -+#ifdef CONFIG_MMC_ATMELMCI_DMA -+ if (host->dma.client.slave) -+ dma_async_client_unregister(&host->dma.client); -+#endif - -- free_irq(platform_get_irq(pdev, 0), host->mmc); -- iounmap(host->regs); -+ free_irq(platform_get_irq(pdev, 0), host); -+ iounmap(host->regs); - -- clk_put(host->mck); -+ clk_put(host->mck); -+ kfree(host); - -- mmc_free_host(host->mmc); -- } - return 0; - } - -diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c -index 9e7a236..6033e74 100644 ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -178,10 +178,18 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param) - if (atmel_pri.Features & 0x02) - extp->EraseSuspend = 2; - -- if (atmel_pri.BottomBoot) -- extp->TopBottom = 2; -- else -- extp->TopBottom = 3; -+ /* Some chips got it backwards... */ -+ if (cfi->id == AT49BV6416) { -+ if (atmel_pri.BottomBoot) -+ extp->TopBottom = 3; -+ else -+ extp->TopBottom = 2; -+ } else { -+ if (atmel_pri.BottomBoot) -+ extp->TopBottom = 2; -+ else -+ extp->TopBottom = 3; -+ } - - /* burst write mode not supported */ - cfi->cfiq->BufWriteTimeoutTyp = 0; -diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c -index 3387e0d..4af80c0 100644 ---- a/drivers/mtd/nand/atmel_nand.c -+++ b/drivers/mtd/nand/atmel_nand.c -@@ -500,7 +500,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) - platform_set_drvdata(pdev, host); - atmel_nand_enable(host); - -- if (host->board->det_pin) { -+ if (gpio_is_valid(host->board->det_pin)) { - if (gpio_get_value(host->board->det_pin)) { - printk("No SmartMedia card inserted.\n"); - res = ENXIO; -diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig -index 9a9755c..13f4fb0 100644 ---- a/drivers/rtc/Kconfig -+++ b/drivers/rtc/Kconfig -@@ -559,6 +559,22 @@ config RTC_DRV_AT91SAM9_GPBR - will be used. The default of zero is normally OK to use, but - on some systems other software needs to use that register. - -+config RTC_DRV_AVR32_AST -+ tristate "AVR32 Asynchronous Timer" -+ depends on AVR32 -+ help -+ RTC driver for the AVR32 Asynchronous Timers. The AST is a -+ simple and flexible timer that can be used both as a -+ high-resolution system timer and an RTC, depending on what -+ clock source it is running from. -+ -+ If you say yes here, and add one or more platform_device -+ called "rtc-ast", those devices will be clocked from a -+ 32.768 kHz crystal oscillator and used as RTCs. -+ -+ This driver can also be built as a module. If so, the module -+ will be called rtc-ast. -+ - config RTC_DRV_BFIN - tristate "Blackfin On-Chip RTC" - depends on BLACKFIN && !BF561 -diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile -index 18622ef..5ad1266 100644 ---- a/drivers/rtc/Makefile -+++ b/drivers/rtc/Makefile -@@ -20,6 +20,7 @@ rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o - obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o - obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o - obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o -+obj-$(CONFIG_RTC_DRV_AVR32_AST) += rtc-ast.o - obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o - obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o - obj-$(CONFIG_RTC_DRV_DS1216) += rtc-ds1216.o -diff --git a/drivers/rtc/rtc-ast.c b/drivers/rtc/rtc-ast.c -new file mode 100644 -index 0000000..be7db91 ---- /dev/null -+++ b/drivers/rtc/rtc-ast.c -@@ -0,0 +1,546 @@ -+/* -+ * An RTC driver for the AVR32 Asynchronous Timer -+ * -+ * Copyright (C) 2008 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+#include <linux/clk.h> -+#include <linux/delay.h> -+#include <linux/interrupt.h> -+#include <linux/io.h> -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/rtc.h> -+ -+#include <asm/ast_regs.h> -+ -+/* -+ * The AST - ASynchronous Timer - is built around a simple cycle -+ * counter that can be driven from one of four selectable clocks with -+ * a selectable power-of-two prescaler. It also has two alarms (ALARM0 -+ * and ALARM1) and two periodic event generators (PER0 and PER1). The -+ * latter can be driven by different tappings of the same prescaler -+ * that drives the counter. -+ * -+ * This driver uses the 32.768 kHz crystal oscillator as a clock -+ * source and a prescaler that gives a 1 Hz counter frequency. It uses -+ * ALARM0 to support both "old-school" and "wake" alarms, PER0 to -+ * support periodic interrupts (PIE) up to 16.384 kHz (at power-of-two -+ * intervals), and PER1 to support a 1 Hz update interrupt (UIE). -+ * -+ * Watchdog interrupts seem to be undocumented and unsupported by -+ * everyone else, so those are not supported for now. -+ * -+ * The AST can wake the system from any sleep mode given that the -+ * source clock is running. On AT32AP720x, the 32.768 kHz crystal -+ * oscillator runs in all sleep modes except "static" and "shutdown". -+ */ -+ -+/* 32768 Hz means up to 60 us for synchronization + a bit of slack */ -+#define AST_SYNC_TIMEOUT_US 100 -+ -+#define AST_CLK_RATE 32768 -+#define AST_1S_PRESCALER 14 /* log2(32768) - 1 */ -+ -+struct rtc_ast { -+ /* Protects I/O registers */ -+ spinlock_t lock; -+ -+ struct rtc_device *rtc; -+ void __iomem *regs; -+ struct clk *osc32; -+ struct clk *pclk; -+}; -+ -+/* -+ * Because the AST is, well, asynchronous, we must make sure we don't -+ * write to certain registers while the previous write is being -+ * synchronized between clock domains. This affects writes to CR, CV, -+ * SCR, WER, PIRx and ARx. To keep the delays minimal, we always -+ * synchronize _before_ writes to these registers. -+ * -+ * This function is also used to synchronize when changing the clock -+ * source, using a different bit in the status register. -+ */ -+static int ast_wait_ready(void __iomem *regs, unsigned int busy_mask) -+{ -+ unsigned long timeout = AST_SYNC_TIMEOUT_US; -+ -+ while (ast_readl(regs, SR) & busy_mask) { -+ udelay(1); -+ if (--timeout == 0) -+ return -ETIMEDOUT; -+ cpu_relax(); -+ } -+ -+ return 0; -+} -+ -+static void rtc_ast_release(struct device *dev) -+{ -+ struct rtc_ast *ast = dev_get_drvdata(dev); -+ -+ /* Disable all interrupts */ -+ clk_enable(ast->pclk); -+ ast_writel(ast->regs, IDR, ~0UL); -+ clk_disable(ast->pclk); -+} -+ -+static int rtc_ast_ioctl(struct device *dev, unsigned int cmd, -+ unsigned long arg) -+{ -+ struct rtc_ast *ast = dev_get_drvdata(dev); -+ int ret = 0; -+ -+ clk_enable(ast->pclk); -+ -+ switch (cmd) { -+ /* REVISIT: Should perhaps verify that irq_task is NULL */ -+ case RTC_AIE_ON: -+ ast_writel(ast->regs, IER, AST_BIT(ALARM0)); -+ break; -+ case RTC_AIE_OFF: -+ ast_writel(ast->regs, IDR, AST_BIT(ALARM0)); -+ break; -+ case RTC_UIE_ON: -+ spin_lock_irq(&ast->lock); -+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY)); -+ if (!ret) { -+ ast_writel(ast->regs, SCR, AST_BIT(PER1)); -+ ast_writel(ast->regs, IER, AST_BIT(PER1)); -+ } -+ spin_unlock_irq(&ast->lock); -+ -+ break; -+ case RTC_UIE_OFF: -+ ast_writel(ast->regs, IDR, AST_BIT(PER1)); -+ break; -+#if 0 -+ case RTC_PIE_ON: -+ spin_lock_irq(&ast->lock); -+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY)); -+ if (ret) -+ break; -+ ast_writel(ast->regs, SCR, AST_BIT(PER0)); -+ spin_unlock_irq(&ast->lock); -+ -+ ast_writel(ast->regs, IER, AST_BIT(PER0)); -+ break; -+ case RTC_PIE_OFF: -+ ast_writel(ast->regs, IDR, AST_BIT(PER1)); -+ break; -+#endif -+ default: -+ ret = -ENOIOCTLCMD; -+ break; -+ } -+ -+ clk_disable(ast->pclk); -+ -+ return ret; -+} -+ -+static int rtc_ast_read_time(struct device *dev, struct rtc_time *tm) -+{ -+ struct rtc_ast *ast = dev_get_drvdata(dev); -+ -+ clk_enable(ast->pclk); -+ rtc_time_to_tm(ast_readl(ast->regs, CV), tm); -+ clk_disable(ast->pclk); -+ -+ return 0; -+} -+ -+static int rtc_ast_set_mmss(struct device *dev, unsigned long secs) -+{ -+ struct rtc_ast *ast = dev_get_drvdata(dev); -+ int ret; -+ -+ clk_enable(ast->pclk); -+ -+ spin_lock_irq(&ast->lock); -+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY)); -+ if (!ret) -+ ast_writel(ast->regs, CV, secs); -+ spin_unlock_irq(&ast->lock); -+ -+ clk_disable(ast->pclk); -+ -+ return ret; -+} -+ -+static int rtc_ast_set_time(struct device *dev, struct rtc_time *tm) -+{ -+ unsigned long secs; -+ int ret; -+ -+ ret = rtc_tm_to_time(tm, &secs); -+ if (!ret) -+ ret = rtc_ast_set_mmss(dev, secs); -+ -+ return ret; -+} -+ -+static int rtc_ast_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) -+{ -+ struct rtc_ast *ast = dev_get_drvdata(dev); -+ -+ clk_enable(ast->pclk); -+ -+ spin_lock_irq(&ast->lock); -+ rtc_time_to_tm(ast_readl(ast->regs, AR0), &alrm->time); -+ alrm->enabled = !!(ast_readl(ast->regs, IMR) & AST_BIT(ALARM0)); -+ alrm->pending = !!(ast_readl(ast->regs, SR) & AST_BIT(ALARM0)); -+ spin_unlock_irq(&ast->lock); -+ -+ clk_disable(ast->pclk); -+ -+ return 0; -+} -+ -+static int rtc_ast_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) -+{ -+ struct rtc_ast *ast = dev_get_drvdata(dev); -+ unsigned long seconds; -+ int ret; -+ -+ ret = rtc_tm_to_time(&alrm->time, &seconds); -+ if (ret) -+ return ret; -+ -+ clk_enable(ast->pclk); -+ -+ /* -+ * REVISIT: The alarm may trigger before we are done here. -+ * Who's responsible for handling that? -+ * -+ * We don't want to clear the ALARM0 flag before we update AR0 -+ * because the previous value of AR0 might trigger an alarm -+ * right after we clear the flag. -+ */ -+ spin_lock_irq(&ast->lock); -+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY)); -+ if (ret) -+ goto unlock; -+ ast_writel(ast->regs, AR0, seconds); -+ -+ /* Try to avoid synchronization penalty */ -+ if (ast_readl(ast->regs, SR) & AST_BIT(ALARM0)) { -+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY)); -+ if (ret) -+ goto unlock; -+ ast_writel(ast->regs, SCR, AST_BIT(ALARM0)); -+ } -+ -+ if (alrm->enabled) -+ ast_writel(ast->regs, IER, AST_BIT(ALARM0)); -+ -+unlock: -+ spin_unlock_irq(&ast->lock); -+ clk_disable(ast->pclk); -+ -+ return ret; -+} -+ -+static int rtc_ast_proc(struct device *dev, struct seq_file *seq) -+{ -+ struct rtc_ast *ast = dev_get_drvdata(dev); -+ u32 imr; -+ -+ clk_enable(ast->pclk); -+ imr = ast_readl(ast->regs, IMR); -+ clk_disable(ast->pclk); -+ -+ return seq_printf(seq, -+ "periodic_IRQ\t: %s\n" -+ "update_IRQ\t: %s\n" -+ "periodic_freq\t: %d\n", -+ (imr & AST_BIT(PER0)) ? "yes" : "no", -+ (imr & AST_BIT(PER1)) ? "yes" : "no", -+ ast->rtc->irq_freq); -+} -+ -+static int rtc_ast_irq_set_freq(struct device *dev, int freq) -+{ -+ struct rtc_ast *ast = dev_get_drvdata(dev); -+ unsigned int pres_bit; -+ int ret; -+ -+ /* RTC core currently ensures this. */ -+ BUG_ON(!freq); -+ -+ pres_bit = __ffs(freq); -+ if (pres_bit > AST_1S_PRESCALER) -+ return -EINVAL; -+ pres_bit = AST_1S_PRESCALER - pres_bit; -+ -+ clk_enable(ast->pclk); -+ -+ spin_lock_irq(&ast->lock); -+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY)); -+ if (ret) -+ goto unlock; -+ -+ ast_writel(ast->regs, PIR0, pres_bit); -+ -+unlock: -+ spin_unlock_irq(&ast->lock); -+ clk_disable(ast->pclk); -+ -+ return ret; -+} -+ -+static int rtc_ast_irq_set_state(struct device *dev, int enabled) -+{ -+ struct rtc_ast *ast = dev_get_drvdata(dev); -+ int ret = 0; -+ -+ clk_enable(ast->pclk); -+ -+ if (enabled) { -+ spin_lock_irq(&ast->lock); -+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY)); -+ if (!ret) { -+ ast_writel(ast->regs, SCR, AST_BIT(PER0)); -+ ast_writel(ast->regs, IER, AST_BIT(PER0)); -+ } -+ spin_unlock_irq(&ast->lock); -+ } else { -+ ast_writel(ast->regs, IDR, AST_BIT(PER1)); -+ } -+ -+ clk_disable(ast->pclk); -+ -+ return ret; -+} -+ -+static const struct rtc_class_ops rtc_ast_ops = { -+ .release = rtc_ast_release, -+ .ioctl = rtc_ast_ioctl, -+ .read_time = rtc_ast_read_time, -+ .set_time = rtc_ast_set_time, -+ .read_alarm = rtc_ast_read_alarm, -+ .set_alarm = rtc_ast_set_alarm, -+ .proc = rtc_ast_proc, -+ .set_mmss = rtc_ast_set_mmss, -+ .irq_set_freq = rtc_ast_irq_set_freq, -+ .irq_set_state = rtc_ast_irq_set_state, -+}; -+ -+static irqreturn_t rtc_ast_interrupt(int irq, void *dev_id) -+{ -+ struct rtc_ast *ast = dev_id; -+ unsigned long events; -+ unsigned long num; -+ u32 status; -+ u32 pending; -+ irqreturn_t ret = IRQ_NONE; -+ -+ clk_enable(ast->pclk); -+ spin_lock(&ast->lock); -+ -+ status = ast_readl(ast->regs, SR); -+ pending = status & ast_readl(ast->regs, IMR); -+ if (unlikely(!pending)) -+ goto out; -+ -+ ast_wait_ready(ast->regs, AST_BIT(BUSY)); -+ ast_writel(ast->regs, SCR, pending); -+ -+ events = RTC_IRQF; -+ num = 0; -+ if (pending & AST_BIT(ALARM0)) { -+ num++; -+ events |= RTC_AF; -+ } -+ if (pending & AST_BIT(PER0)) { -+ num++; -+ events |= RTC_PF; -+ } -+ if (pending & AST_BIT(PER1)) { -+ num++; -+ events |= RTC_UF; -+ } -+ -+ rtc_update_irq(ast->rtc, num, events); -+ ret = IRQ_HANDLED; -+ -+out: -+ spin_unlock(&ast->lock); -+ clk_disable(ast->pclk); -+ -+ return IRQ_HANDLED; -+} -+ -+static int __init rtc_ast_probe(struct platform_device *pdev) -+{ -+ struct resource *regs; -+ struct rtc_ast *ast; -+ int irq; -+ int ret; -+ -+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!regs) { -+ dev_dbg(&pdev->dev, "no mmio resource\n"); -+ return -ENXIO; -+ } -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) { -+ dev_dbg(&pdev->dev, "no irq\n"); -+ return -ENXIO; -+ } -+ -+ ast = kzalloc(sizeof(struct rtc_ast), GFP_KERNEL); -+ if (!ast) { -+ dev_dbg(&pdev->dev, "out of memory\n"); -+ return -ENOMEM; -+ } -+ -+ ast->osc32 = clk_get(NULL, "osc32k"); -+ if (IS_ERR(ast->osc32)) { -+ ret = PTR_ERR(ast->osc32); -+ dev_dbg(&pdev->dev, "no 32 kHz oscillator\n"); -+ goto err_osc32; -+ } -+ -+ ast->pclk = clk_get(&pdev->dev, "pclk"); -+ if (IS_ERR(ast->pclk)) { -+ ret = PTR_ERR(ast->pclk); -+ dev_dbg(&pdev->dev, "no peripheral clock\n"); -+ goto err_pclk; -+ } -+ -+ spin_lock_init(&ast->lock); -+ -+ ast->regs = ioremap(regs->start, regs->end - regs->start + 1); -+ if (!ast->regs) { -+ dev_dbg(&pdev->dev, "failed to map registers\n"); -+ ret = -ENOMEM; -+ goto err_ioremap; -+ } -+ -+ clk_enable(ast->osc32); -+ clk_enable(ast->pclk); -+ -+ /* Initialize the AST if it isn't running already */ -+ if (!(ast_readl(ast->regs, CR) & AST_BIT(CR_EN))) { -+ ast_wait_ready(ast->regs, AST_BIT(CLK_BUSY)); -+ ast_writel(ast->regs, CLOCK, -+ AST_BF(CLOCK_CSSEL, AST_CLOCK_OSC32) -+ | AST_BIT(CLOCK_CEN)); -+ ret = ast_wait_ready(ast->regs, AST_BIT(CLK_BUSY)); -+ if (ret) { -+ dev_dbg(&pdev->dev, -+ "timed out selecting clock source\n"); -+ goto err_clksel; -+ } -+ ast_wait_ready(ast->regs, AST_BIT(BUSY)); -+ ast_writel(ast->regs, CV, 0); -+ ast_wait_ready(ast->regs, AST_BIT(BUSY)); -+ ast_writel(ast->regs, CR, AST_BIT(CR_EN) | AST_BIT(CR_PCLR) -+ | AST_BF(CR_PSEL, AST_1S_PRESCALER)); -+ } -+ -+ ast_writel(ast->regs, IDR, ~0UL); -+ ast_wait_ready(ast->regs, AST_BIT(BUSY)); -+ ast_writel(ast->regs, WER, 0); -+ ast_wait_ready(ast->regs, AST_BIT(BUSY)); -+ ast_writel(ast->regs, PIR0, AST_1S_PRESCALER); -+ ast_wait_ready(ast->regs, AST_BIT(BUSY)); -+ ast_writel(ast->regs, PIR1, AST_1S_PRESCALER); -+ -+ ret = request_irq(irq, rtc_ast_interrupt, 0, "rtc-ast", ast); -+ if (ret) { -+ dev_dbg(&pdev->dev, "could not request irq %d\n", irq); -+ goto err_request_irq; -+ } -+ -+ ast->rtc = rtc_device_register("rtc-ast", &pdev->dev, -+ &rtc_ast_ops, THIS_MODULE); -+ if (IS_ERR(ast->rtc)) { -+ dev_dbg(&pdev->dev, "could not register rtc device\n"); -+ ret = PTR_ERR(ast->rtc); -+ goto err_register; -+ } -+ -+ ast->rtc->max_user_freq = AST_CLK_RATE / 2; -+ ast->rtc->irq_freq = 1; -+ -+ ast_wait_ready(ast->regs, AST_BIT(BUSY)); -+ clk_disable(ast->pclk); -+ platform_set_drvdata(pdev, ast); -+ device_init_wakeup(&pdev->dev, 1); -+ -+ dev_info(&pdev->dev, "AVR32 Asynchronous Timer at %08lx irq %d\n", -+ (unsigned long)regs->start, irq); -+ -+ return 0; -+ -+err_register: -+ free_irq(irq, ast); -+err_request_irq: -+err_clksel: -+ clk_disable(ast->pclk); -+ clk_disable(ast->osc32); -+ iounmap(ast->regs); -+err_ioremap: -+ clk_put(ast->pclk); -+err_pclk: -+ clk_put(ast->osc32); -+err_osc32: -+ kfree(ast); -+ return ret; -+} -+ -+static int __exit rtc_ast_remove(struct platform_device *pdev) -+{ -+ struct rtc_ast *ast = platform_get_drvdata(pdev); -+ -+ device_init_wakeup(&pdev->dev, 0); -+ -+ clk_enable(ast->pclk); -+ ast_writel(ast->regs, IDR, ~0UL); -+ ast_readl(ast->regs, IMR); -+ clk_disable(ast->pclk); -+ -+ free_irq(platform_get_irq(pdev, 0), ast); -+ rtc_device_unregister(ast->rtc); -+ clk_disable(ast->osc32); -+ iounmap(ast->regs); -+ clk_put(ast->pclk); -+ clk_put(ast->osc32); -+ kfree(ast); -+ -+ platform_set_drvdata(pdev, NULL); -+ -+ return 0; -+} -+ -+static struct platform_driver rtc_ast_driver = { -+ .remove = __exit_p(rtc_ast_remove), -+ .driver = { -+ .name = "rtc-ast", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init rtc_ast_init(void) -+{ -+ return platform_driver_probe(&rtc_ast_driver, rtc_ast_probe); -+} -+module_init(rtc_ast_init); -+ -+static void __exit rtc_ast_exit(void) -+{ -+ platform_driver_unregister(&rtc_ast_driver); -+} -+module_exit(rtc_ast_exit); -+ -+MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>"); -+MODULE_DESCRIPTION("AVR32 Asynchronous Timer RTC"); -+MODULE_LICENSE("GPL"); -diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig -index b9d0efb..ebfb883 100644 ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -53,9 +53,14 @@ if SPI_MASTER - - comment "SPI Master Controller Drivers" - -+config SPI_ATMEL_HAVE_PDC -+ def_bool y -+ depends on (ARCH_AT91 || CPU_AT32AP700X) -+ - config SPI_ATMEL - tristate "Atmel SPI Controller" - depends on (ARCH_AT91 || AVR32) -+ depends on SPI_ATMEL_HAVE_PDC || DMA_ENGINE - help - This selects a driver for the Atmel SPI Controller, present on - many AT32 (AVR32) and AT91 (ARM) chips. -diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c -index 02f9320..5afae71 100644 ---- a/drivers/spi/atmel_spi.c -+++ b/drivers/spi/atmel_spi.c -@@ -1,306 +1,445 @@ - /* - * Driver for Atmel AT32 and AT91 SPI Controllers - * -- * Copyright (C) 2006 Atmel Corporation -+ * Copyright (C) 2006-2008 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - --#include <linux/kernel.h> --#include <linux/init.h> - #include <linux/clk.h> --#include <linux/module.h> --#include <linux/platform_device.h> - #include <linux/delay.h> - #include <linux/dma-mapping.h> -+#include <linux/dmaengine.h> - #include <linux/err.h> -+#include <linux/gpio.h> -+#include <linux/init.h> - #include <linux/interrupt.h> -+#include <linux/io.h> -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/wait.h> -+#include <linux/workqueue.h> -+#include <linux/spi/atmel_spi.h> - #include <linux/spi/spi.h> - --#include <asm/io.h> --#include <mach/board.h> --#include <mach/gpio.h> - #include <mach/cpu.h> - - #include "atmel_spi.h" - --/* -- * The core SPI transfer engine just talks to a register bank to set up -- * DMA transfers; transfer queue progress is driven by IRQs. The clock -- * framework provides the base clock, subdivided for each spi_device. -- * -- * Newer controllers, marked with "new_1" flag, have: -- * - CR.LASTXFER -- * - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero) -- * - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs) -- * - SPI_CSRx.CSAAT -- * - SPI_CSRx.SBCR allows faster clocking -+#define BUFFER_SIZE PAGE_SIZE -+#define INVALID_DMA_ADDRESS 0xffffffff -+#define MAX_SG_SEGS 8 -+ -+/** -+ * struct atmel_spi - SPI master controller state -+ * @lock: Spinlock protecting the @queue, @stay and @stopping fields -+ * as well as the hardware registers. -+ * @regs: Base address of the hardware registers. -+ * @wait: Waitqueue used to wait for DMA completion or errors. -+ * @pending: Number of DMA transfers currently pending. -+ * @pending_bytes: Number of bytes submitted for DMA but not yet -+ * accounted for. -+ * @error: Data transfer error detected by interrupt handler. When this -+ * is set to a nonzero value, the DMA engine is stopped, @pending -+ * is set to 0 and @wait is triggered. -+ * @buffer: Scratch buffer for use when the upper layers didn't provide -+ * a TX or RX buffer. -+ * @buffer_dma: DMA address of @buffer. -+ * @buffer_size: Length of @buffer in bytes. -+ * @queue: SPI messages queued for transfer. -+ * @workqueue: Per-controller workqueue. -+ * @work: Queue processing work struct. -+ * @stay: If the last SPI message caused the SPI device to stay active, -+ * this points to the SPI device associated with that message. NULL -+ * otherwise. -+ * @clk: Bus clock connected to the controller. -+ * @base_hz: Base clock rate in Hz used for baud rate calculations. -+ * @stopping: Queue is being stopped. No new messages are started. -+ * @always_bounce: Always do transfers to/from bounce buffer. -+ * @pdev: Platform device associated with the controller. - */ - struct atmel_spi { - spinlock_t lock; -- - void __iomem *regs; -- int irq; -- struct clk *clk; -- struct platform_device *pdev; -- unsigned new_1:1; -- struct spi_device *stay; - -- u8 stopping; -- struct list_head queue; -- struct spi_transfer *current_transfer; -- unsigned long current_remaining_bytes; -- struct spi_transfer *next_transfer; -- unsigned long next_remaining_bytes; -+ wait_queue_head_t wait; -+ int pending; -+ size_t pending_bytes; -+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC -+ struct scatterlist tx_sg[MAX_SG_SEGS]; -+ struct scatterlist rx_sg[MAX_SG_SEGS]; -+ unsigned int sg_len; -+ struct dma_async_tx_descriptor *tx_desc; -+ struct dma_async_tx_descriptor *rx_desc; -+ struct dma_chan *tx_chan; -+ struct dma_chan *rx_chan; -+ struct dma_client rx_client; -+ struct dma_client tx_client; -+#endif -+ int error; - - void *buffer; - dma_addr_t buffer_dma; -+ size_t buffer_size; -+ -+ struct list_head queue; -+ struct workqueue_struct *workqueue; -+ struct work_struct work; -+ struct spi_device *stay; -+ struct clk *clk; -+ unsigned long base_hz; -+ bool stopping; -+ bool always_bounce; -+ -+ struct platform_device *pdev; -+#ifdef CONFIG_DEBUG_FS -+ struct dentry *debugfs_root; -+#endif - }; - --#define BUFFER_SIZE PAGE_SIZE --#define INVALID_DMA_ADDRESS 0xffffffff -+/** -+ * struct atmel_spi_device - Controller-specific per-slave state -+ * @npcs_pin: GPIO pin ID hooked up to this SPI slave. -+ * @csr: CSRn register value used when talking to this SPI slave. -+ */ -+struct atmel_spi_device { -+ unsigned int npcs_pin; -+ u32 csr; -+}; - - /* -- * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby -- * they assume that spi slave device state will not change on deselect, so -- * that automagic deselection is OK. ("NPCSx rises if no data is to be -- * transmitted") Not so! Workaround uses nCSx pins as GPIOs; or newer -- * controllers have CSAAT and friends. -- * -- * Since the CSAAT functionality is a bit weird on newer controllers as -- * well, we use GPIO to control nCSx pins on all controllers, updating -- * MR.PCS to avoid confusing the controller. Using GPIOs also lets us -- * support active-high chipselects despite the controller's belief that -- * only active-low devices/systems exists. -+ * Version 2 of the SPI controller has -+ * - CR.LASTXFER -+ * - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero) -+ * - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs) -+ * - SPI_CSRx.CSAAT -+ * - SPI_CSRx.SBCR allows faster clocking - * -- * However, at91rm9200 has a second erratum whereby nCS0 doesn't work -- * right when driven with GPIO. ("Mode Fault does not allow more than one -- * Master on Chip Select 0.") No workaround exists for that ... so for -- * nCS0 on that chip, we (a) don't use the GPIO, (b) can't support CS_HIGH, -- * and (c) will trigger that first erratum in some cases. -+ * We can determine the controller version by reading the VERSION -+ * register, but I haven't checked that it exists on all chips, and -+ * this is cheaper anyway. - */ -- --static void cs_activate(struct atmel_spi *as, struct spi_device *spi) -+static bool atmel_spi_is_v2(void) - { -- unsigned gpio = (unsigned) spi->controller_data; -- unsigned active = spi->mode & SPI_CS_HIGH; -- u32 mr; -- int i; -- u32 csr; -- u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0; -+ return !cpu_is_at91rm9200(); -+} - -- /* Make sure clock polarity is correct */ -- for (i = 0; i < spi->master->num_chipselect; i++) { -- csr = spi_readl(as, CSR0 + 4 * i); -- if ((csr ^ cpol) & SPI_BIT(CPOL)) -- spi_writel(as, CSR0 + 4 * i, csr ^ SPI_BIT(CPOL)); -- } -+static bool atmel_spi_xfer_is_last(struct spi_message *msg, -+ struct spi_transfer *xfer) -+{ -+ return &xfer->transfer_list == msg->transfers.prev; -+} - -- mr = spi_readl(as, MR); -- mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr); -+/*-------------------------------------------------------------------------*/ - -- dev_dbg(&spi->dev, "activate %u%s, mr %08x\n", -- gpio, active ? " (high)" : "", -- mr); -+/* -+ * GCC doesn't eliminate _all_ the dead code, only some of it. In -+ * particular, the file operations appear to be difficult even if the -+ * file operations struct itself gets eliminated. -+ * -+ * So let's do the CPP dance. -+ */ -+#ifdef CONFIG_DEBUG_FS - -- if (!(cpu_is_at91rm9200() && spi->chip_select == 0)) -- gpio_set_value(gpio, active); -- spi_writel(as, MR, mr); --} -+#include <linux/debugfs.h> -+#include <linux/seq_file.h> - --static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi) -+static int atmel_spi_queue_show(struct seq_file *s, void *v) - { -- unsigned gpio = (unsigned) spi->controller_data; -- unsigned active = spi->mode & SPI_CS_HIGH; -- u32 mr; -+ struct atmel_spi *as = s->private; -+ struct spi_message *msg; -+ struct spi_transfer *xfer; - -- /* only deactivate *this* device; sometimes transfers to -- * another device may be active when this routine is called. -- */ -- mr = spi_readl(as, MR); -- if (~SPI_BFEXT(PCS, mr) & (1 << spi->chip_select)) { -- mr = SPI_BFINS(PCS, 0xf, mr); -- spi_writel(as, MR, mr); -+ spin_lock_irq(&as->lock); -+ list_for_each_entry(msg, &as->queue, queue) { -+ seq_printf(s, "msg to %s:%s DMA mapped, status %d actual %u\n", -+ msg->spi->dev.bus_id, -+ msg->is_dma_mapped ? "" : " Not", -+ msg->status, msg->actual_length); -+ list_for_each_entry(xfer, &msg->transfers, transfer_list) { -+ seq_printf(s, " t%p r%p l%u%s %u bits %u us %u Hz\n", -+ xfer->tx_buf, xfer->rx_buf, xfer->len, -+ xfer->cs_change ? "cs_change" : "", -+ xfer->bits_per_word, -+ xfer->delay_usecs, -+ xfer->speed_hz); -+ } - } -+ spin_unlock_irq(&as->lock); - -- dev_dbg(&spi->dev, "DEactivate %u%s, mr %08x\n", -- gpio, active ? " (low)" : "", -- mr); -- -- if (!(cpu_is_at91rm9200() && spi->chip_select == 0)) -- gpio_set_value(gpio, !active); -+ return 0; - } - --static inline int atmel_spi_xfer_is_last(struct spi_message *msg, -- struct spi_transfer *xfer) -+static int atmel_spi_queue_open(struct inode *inode, struct file *file) - { -- return msg->transfers.prev == &xfer->transfer_list; -+ return single_open(file, atmel_spi_queue_show, inode->i_private); - } - --static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer) -+static const struct file_operations atmel_spi_queue_fops = { -+ .owner = THIS_MODULE, -+ .open = atmel_spi_queue_open, -+ .read = seq_read, -+ .llseek = seq_lseek, -+ .release = single_release, -+}; -+ -+static void atmel_spi_show_status_reg(struct seq_file *s, -+ const char *regname, u32 value) - { -- return xfer->delay_usecs == 0 && !xfer->cs_change; -+ static const char *sr_bit[] = { -+ [0] = "RDRF", -+ [1] = "TDRE", -+ [2] = "MODF", -+ [3] = "OVRES", -+ [4] = "ENDRX", -+ [5] = "ENDTX", -+ [6] = "RXBUFF", -+ [7] = "TXBUFE", -+ [8] = "NSSR", -+ [9] = "TXEMPTY", -+ [16] = "SPIENS", -+ }; -+ unsigned int i; -+ -+ seq_printf(s, "%s:\t0x%08x", regname, value); -+ for (i = 0; i < ARRAY_SIZE(sr_bit); i++) { -+ if (value & (1 << i)) { -+ if (sr_bit[i]) -+ seq_printf(s, " %s", sr_bit[i]); -+ else -+ seq_printf(s, " UNKNOWN(%u)", i); -+ } -+ } -+ seq_putc(s, '\n'); - } - --static void atmel_spi_next_xfer_data(struct spi_master *master, -- struct spi_transfer *xfer, -- dma_addr_t *tx_dma, -- dma_addr_t *rx_dma, -- u32 *plen) -+static int atmel_spi_regs_show(struct seq_file *s, void *v) - { -- struct atmel_spi *as = spi_master_get_devdata(master); -- u32 len = *plen; -+ struct atmel_spi *as = s->private; -+ unsigned int i; -+ u32 value; -+ u32 *buf; - -- /* use scratch buffer only when rx or tx data is unspecified */ -- if (xfer->rx_buf) -- *rx_dma = xfer->rx_dma + xfer->len - len; -- else { -- *rx_dma = as->buffer_dma; -- if (len > BUFFER_SIZE) -- len = BUFFER_SIZE; -- } -- if (xfer->tx_buf) -- *tx_dma = xfer->tx_dma + xfer->len - len; -- else { -- *tx_dma = as->buffer_dma; -- if (len > BUFFER_SIZE) -- len = BUFFER_SIZE; -- memset(as->buffer, 0, len); -- dma_sync_single_for_device(&as->pdev->dev, -- as->buffer_dma, len, DMA_TO_DEVICE); -- } -+ buf = kmalloc(0x200, GFP_KERNEL); -+ if (!buf) -+ return -ENOMEM; - -- *plen = len; --} -+ /* Grab a more or less consistent snapshot */ -+ spin_lock_irq(&as->lock); -+ memcpy_fromio(buf, as->regs, 0x200); -+ spin_unlock_irq(&as->lock); - --/* -- * Submit next transfer for DMA. -- * lock is held, spi irq is blocked -- */ --static void atmel_spi_next_xfer(struct spi_master *master, -- struct spi_message *msg) --{ -- struct atmel_spi *as = spi_master_get_devdata(master); -- struct spi_transfer *xfer; -- u32 len, remaining; -- u32 ieval; -- dma_addr_t tx_dma, rx_dma; -- -- if (!as->current_transfer) -- xfer = list_entry(msg->transfers.next, -- struct spi_transfer, transfer_list); -- else if (!as->next_transfer) -- xfer = list_entry(as->current_transfer->transfer_list.next, -- struct spi_transfer, transfer_list); -- else -- xfer = NULL; -+ value = buf[SPI_MR / 4]; -+ seq_printf(s, "MR:\t0x%08x%s%s%s%s%s%s PCS=%x DLYBCS=%u\n", -+ value, -+ (value & SPI_BIT(MSTR)) ? " MSTR" : "", -+ (value & SPI_BIT(PS)) ? " PS" : "", -+ (value & SPI_BIT(PCSDEC)) ? " PCSDEC" : "", -+ (value & SPI_BIT(FDIV)) ? " FDIV" : "", -+ (value & SPI_BIT(MODFDIS)) ? " MODFDIS" : "", -+ (value & SPI_BIT(LLB)) ? " LLB" : "", -+ SPI_BFEXT(PCS, value), -+ SPI_BFEXT(DLYBCS, value)); -+ -+ atmel_spi_show_status_reg(s, "SR", buf[SPI_SR / 4]); -+ atmel_spi_show_status_reg(s, "IMR", buf[SPI_IMR / 4]); -+ -+ for (i = 0; i < 4; i++) { -+ value = buf[SPI_CSR0 / 4 + i]; -+ seq_printf(s, "CSR%u:\t0x%08x%s%s%s\n", -+ i, value, -+ (value & SPI_BIT(CPOL)) ? " CPOL" : "", -+ (value & SPI_BIT(NCPHA)) ? " NCPHA" : "", -+ (value & SPI_BIT(CSAAT)) ? " CSAAT" : ""); -+ seq_printf(s, "\t\tBITS=%u SCBR=%u DLYBS=%u DLYBCT=%u\n", -+ SPI_BFEXT(BITS, value) + 8, -+ SPI_BFEXT(SCBR, value), -+ SPI_BFEXT(DLYBS, value), -+ SPI_BFEXT(DLYBCT, value)); -+ } - -- if (xfer) { -- spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); -+ seq_printf(s, "RPR:\t0x%08x\n", buf[SPI_RPR / 4]); -+ seq_printf(s, "RCR:\t0x%08x\n", buf[SPI_RCR / 4]); -+ seq_printf(s, "TPR:\t0x%08x\n", buf[SPI_TPR / 4]); -+ seq_printf(s, "TCR:\t0x%08x\n", buf[SPI_TCR / 4]); -+ seq_printf(s, "RNPR:\t0x%08x\n", buf[SPI_RNPR / 4]); -+ seq_printf(s, "RNCR:\t0x%08x\n", buf[SPI_RNCR / 4]); -+ seq_printf(s, "TNPR:\t0x%08x\n", buf[SPI_TNPR / 4]); -+ seq_printf(s, "TNCR:\t0x%08x\n", buf[SPI_TNCR / 4]); - -- len = xfer->len; -- atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); -- remaining = xfer->len - len; -+ value = buf[SPI_PTSR / 4]; -+ seq_printf(s, "PTSR:\t0x%08x%s%s\n", value, -+ (value & SPI_BIT(RXTEN)) ? " RXTEN" : "", -+ (value & SPI_BIT(TXTEN)) ? " TXTEN" : ""); - -- spi_writel(as, RPR, rx_dma); -- spi_writel(as, TPR, tx_dma); -+ kfree(buf); - -- if (msg->spi->bits_per_word > 8) -- len >>= 1; -- spi_writel(as, RCR, len); -- spi_writel(as, TCR, len); -+ return 0; -+} - -- dev_dbg(&msg->spi->dev, -- " start xfer %p: len %u tx %p/%08x rx %p/%08x\n", -- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma, -- xfer->rx_buf, xfer->rx_dma); -- } else { -- xfer = as->next_transfer; -- remaining = as->next_remaining_bytes; -- } -+static int atmel_spi_regs_open(struct inode *inode, struct file *file) -+{ -+ return single_open(file, atmel_spi_regs_show, inode->i_private); -+} - -- as->current_transfer = xfer; -- as->current_remaining_bytes = remaining; -+static const struct file_operations atmel_spi_regs_fops = { -+ .owner = THIS_MODULE, -+ .open = atmel_spi_regs_open, -+ .read = seq_read, -+ .llseek = seq_lseek, -+ .release = single_release, -+}; - -- if (remaining > 0) -- len = remaining; -- else if (!atmel_spi_xfer_is_last(msg, xfer) -- && atmel_spi_xfer_can_be_chained(xfer)) { -- xfer = list_entry(xfer->transfer_list.next, -- struct spi_transfer, transfer_list); -- len = xfer->len; -- } else -- xfer = NULL; -+static void atmel_spi_init_debugfs(struct atmel_spi *as) -+{ -+ struct dentry *root; -+ struct dentry *node; - -- as->next_transfer = xfer; -+ root = debugfs_create_dir(as->pdev->dev.bus_id, NULL); -+ if (IS_ERR(root)) -+ /* Debugfs not enabled */ -+ return; -+ if (!root) -+ /* Debugfs enabled, but failed to create directory */ -+ goto err_root; -+ -+ node = debugfs_create_file("regs", S_IRUSR, root, as, -+ &atmel_spi_regs_fops); -+ if (!node) -+ goto err; -+ node = debugfs_create_file("queue", S_IRUSR, root, as, -+ &atmel_spi_queue_fops); -+ if (!node) -+ goto err; -+ -+ as->debugfs_root = root; -+ return; -+ -+err: -+ debugfs_remove_recursive(root); -+err_root: -+ dev_err(&as->pdev->dev, "failed to initialize debugfs\n"); -+} - -- if (xfer) { -- u32 total; -+static void atmel_spi_cleanup_debugfs(struct atmel_spi *as) -+{ -+ debugfs_remove_recursive(as->debugfs_root); -+} - -- total = len; -- atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); -- as->next_remaining_bytes = total - len; -+#else -+static void atmel_spi_init_debugfs(struct atmel_spi *as) -+{ - -- spi_writel(as, RNPR, rx_dma); -- spi_writel(as, TNPR, tx_dma); -+} -+static void atmel_spi_cleanup_debugfs(struct atmel_spi *as) -+{ - -- if (msg->spi->bits_per_word > 8) -- len >>= 1; -- spi_writel(as, RNCR, len); -- spi_writel(as, TNCR, len); -+} -+#endif - -- dev_dbg(&msg->spi->dev, -- " next xfer %p: len %u tx %p/%08x rx %p/%08x\n", -- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma, -- xfer->rx_buf, xfer->rx_dma); -- ieval = SPI_BIT(ENDRX) | SPI_BIT(OVRES); -- } else { -- spi_writel(as, RNCR, 0); -- spi_writel(as, TNCR, 0); -- ieval = SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) | SPI_BIT(OVRES); -- } -+/* -+ * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby -+ * they assume that spi slave device state will not change on deselect, so -+ * that automagic deselection is OK. ("NPCSx rises if no data is to be -+ * transmitted") Not so! Workaround uses nCSx pins as GPIOs; or newer -+ * controllers have CSAAT and friends. -+ * -+ * Since the CSAAT functionality is a bit weird on newer controllers as -+ * well, we use GPIO to control nCSx pins on all controllers, updating -+ * MR.PCS to avoid confusing the controller. Using GPIOs also lets us -+ * support active-high chipselects despite the controller's belief that -+ * only active-low devices/systems exists. -+ * -+ * However, at91rm9200 has a second erratum whereby nCS0 doesn't work -+ * right when driven with GPIO. ("Mode Fault does not allow more than one -+ * Master on Chip Select 0.") No workaround exists for that ... so for -+ * nCS0 on that chip, we (a) don't use the GPIO, (b) can't support CS_HIGH, -+ * and (c) will trigger that first erratum in some cases. -+ * -+ * TODO: Test if the atmel_spi_is_v2() branch below works on -+ * AT91RM9200 if we use some other register than CSR0. However, don't -+ * do this unconditionally since AP7000 has an errata where the BITS -+ * field in CSR0 overrides all other CSRs. -+ */ - -- /* REVISIT: We're waiting for ENDRX before we start the next -- * transfer because we need to handle some difficult timing -- * issues otherwise. If we wait for ENDTX in one transfer and -- * then starts waiting for ENDRX in the next, it's difficult -- * to tell the difference between the ENDRX interrupt we're -- * actually waiting for and the ENDRX interrupt of the -- * previous transfer. -- * -- * It should be doable, though. Just not now... -- */ -- spi_writel(as, IER, ieval); -- spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN)); -+static void atmel_spi_set_csr(struct atmel_spi *as, -+ struct spi_device *spi, u32 csr) -+{ -+ if (atmel_spi_is_v2()) -+ spi_writel(as, CSR0, csr); -+ else -+ spi_writel(as, CSR0 + 4 * spi->chip_select, csr); - } - --static void atmel_spi_next_message(struct spi_master *master) -+static void cs_activate(struct atmel_spi *as, struct spi_device *spi) - { -- struct atmel_spi *as = spi_master_get_devdata(master); -- struct spi_message *msg; -- struct spi_device *spi; -+ struct atmel_spi_device *asd = spi->controller_state; -+ unsigned active = spi->mode & SPI_CS_HIGH; -+ -+ if (atmel_spi_is_v2()) { -+ /* -+ * Always use CSR0. This ensures that the clock -+ * switches to the correct idle polarity before we -+ * toggle the CS. -+ */ -+ atmel_spi_set_csr(as, spi, asd->csr); -+ spi_writel(as, MR, SPI_BF(PCS, 0x0e) | SPI_BIT(MODFDIS) -+ | SPI_BIT(MSTR)); -+ spi_readl(as, MR); -+ dev_vdbg(&spi->dev, "activate %u%s, csr0: %08x\n", -+ asd->npcs_pin, active ? " (low)" : "", -+ asd->csr); -+ -+ gpio_set_value(asd->npcs_pin, active); -+ } else { -+ u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0; -+ int i; -+ u32 mr; -+ u32 csr; -+ -+ /* Make sure clock polarity is correct */ -+ for (i = 0; i < spi->master->num_chipselect; i++) { -+ csr = spi_readl(as, CSR0 + 4 * i); -+ if ((csr ^ cpol) & SPI_BIT(CPOL)) -+ spi_writel(as, CSR0 + 4 * i, -+ csr ^ SPI_BIT(CPOL)); -+ } - -- BUG_ON(as->current_transfer); -+ mr = spi_readl(as, MR); -+ mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr); -+ dev_vdbg(&spi->dev, "activate %u%s, mr: %08x csr: %08x\n", -+ asd->npcs_pin, active ? " (low)" : "", -+ mr, csr); -+ if (spi->chip_select != 0) -+ gpio_set_value(asd->npcs_pin, active); -+ spi_writel(as, MR, mr); -+ } -+} - -- msg = list_entry(as->queue.next, struct spi_message, queue); -- spi = msg->spi; -+static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi) -+{ -+ struct atmel_spi_device *asd = spi->controller_state; -+ unsigned active = spi->mode & SPI_CS_HIGH; -+ u32 mr; - -- dev_dbg(master->dev.parent, "start message %p for %s\n", -- msg, spi->dev.bus_id); -+ /* only deactivate *this* device; sometimes transfers to -+ * another device may be active when this routine is called. -+ */ -+ mr = spi_readl(as, MR); -+ if (~SPI_BFEXT(PCS, mr) & (1 << spi->chip_select)) { -+ mr = SPI_BFINS(PCS, 0xf, mr); -+ spi_writel(as, MR, mr); -+ } - -- /* select chip if it's not still active */ -- if (as->stay) { -- if (as->stay != spi) { -- cs_deactivate(as, as->stay); -- cs_activate(as, spi); -- } -- as->stay = NULL; -- } else -- cs_activate(as, spi); -+ dev_vdbg(&spi->dev, "DEactivate %u%s, mr %08x\n", -+ asd->npcs_pin, active ? " (low)" : "", -+ mr); - -- atmel_spi_next_xfer(master, msg); -+ if (atmel_spi_is_v2() || spi->chip_select != 0) -+ gpio_set_value(asd->npcs_pin, !active); - } - - /* -@@ -338,162 +477,460 @@ atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer) - return 0; - } - --static void atmel_spi_dma_unmap_xfer(struct spi_master *master, -+static void atmel_spi_dma_unmap_xfer(struct atmel_spi *as, - struct spi_transfer *xfer) - { - if (xfer->tx_dma != INVALID_DMA_ADDRESS) -- dma_unmap_single(master->dev.parent, xfer->tx_dma, -+ dma_unmap_single(&as->pdev->dev, xfer->tx_dma, - xfer->len, DMA_TO_DEVICE); - if (xfer->rx_dma != INVALID_DMA_ADDRESS) -- dma_unmap_single(master->dev.parent, xfer->rx_dma, -+ dma_unmap_single(&as->pdev->dev, xfer->rx_dma, - xfer->len, DMA_FROM_DEVICE); - } - --static void --atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as, -- struct spi_message *msg, int status, int stay) -+static void atmel_spi_dma_unmap_msg(struct atmel_spi *as, struct spi_message *msg) - { -- if (!stay || status < 0) -- cs_deactivate(as, msg->spi); -- else -- as->stay = msg->spi; -- -- list_del(&msg->queue); -- msg->status = status; -- -- dev_dbg(master->dev.parent, -- "xfer complete: %u bytes transferred\n", -- msg->actual_length); -+ struct spi_transfer *xfer; - -- spin_unlock(&as->lock); -- msg->complete(msg->context); -- spin_lock(&as->lock); -+ if (!msg->is_dma_mapped) -+ list_for_each_entry(xfer, &msg->transfers, transfer_list) -+ atmel_spi_dma_unmap_xfer(as, xfer); -+} - -- as->current_transfer = NULL; -- as->next_transfer = NULL; -+static void atmel_spi_handle_error(struct atmel_spi *as, -+ struct spi_message *msg, int err) -+{ -+ unsigned int timeout; -+ -+ /* Drain the buffers so that the hardware is ready for a new message */ -+ for (timeout = 1000; timeout; timeout--) -+ if (spi_readl(as, SR) & SPI_BIT(TXEMPTY)) -+ break; -+ if (!timeout) -+ dev_warn(&msg->spi->dev, -+ "timeout waiting for TXEMPTY"); -+ while (spi_readl(as, SR) & SPI_BIT(RDRF)) -+ spi_readl(as, RDR); -+ -+ /* Clear any overrun happening while cleaning up */ -+ spi_readl(as, SR); - -- /* continue if needed */ -- if (list_empty(&as->queue) || as->stopping) -- spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); -- else -- atmel_spi_next_message(master); -+ msg->status = err; -+ as->error = 0; - } - --static irqreturn_t --atmel_spi_interrupt(int irq, void *dev_id) -+#ifdef CONFIG_SPI_ATMEL_HAVE_PDC -+static int atmel_spi_wait_idle(struct atmel_spi *as, struct spi_message *msg) - { -- struct spi_master *master = dev_id; -- struct atmel_spi *as = spi_master_get_devdata(master); -- struct spi_message *msg; -- struct spi_transfer *xfer; -- u32 status, pending, imr; -- int ret = IRQ_NONE; -+ int err; - -- spin_lock(&as->lock); -+ wait_event(as->wait, as->pending == 0); -+ err = as->error; -+ if (err) { -+ dev_warn(&msg->spi->dev, -+ "transfer error %d (%u/%u remaining)\n", -+ err, spi_readl(as, TCR), spi_readl(as, RCR)); -+ -+ spi_writel(as, TNCR, 0); -+ spi_writel(as, RNCR, 0); -+ spi_writel(as, TCR, 0); -+ spi_writel(as, RCR, 0); - -- xfer = as->current_transfer; -- msg = list_entry(as->queue.next, struct spi_message, queue); -+ atmel_spi_handle_error(as, msg, err); - -- imr = spi_readl(as, IMR); -- status = spi_readl(as, SR); -- pending = status & imr; -+ return err; -+ } - -- if (pending & SPI_BIT(OVRES)) { -- int timeout; -+ msg->actual_length += as->pending_bytes; -+ as->pending_bytes = 0; -+ -+ dev_vdbg(&msg->spi->dev, "controller idle, xfered so far: %u\n", -+ msg->actual_length); -+ -+ return 0; -+} -+ -+static int atmel_spi_submit_xfer(struct atmel_spi *as, struct spi_device *spi, -+ struct spi_message *msg, struct spi_transfer *xfer) -+{ -+ unsigned int bits = xfer->bits_per_word; -+ unsigned int speed_hz = xfer->speed_hz; -+ unsigned int submitted = 0; -+ dma_addr_t rx_dma; -+ dma_addr_t tx_dma; -+ -+ dev_vdbg(&spi->dev, "submit_xfer len %u rx %p tx %p\n", -+ xfer->len, xfer->rx_buf, xfer->tx_buf); -+ dev_vdbg(&spi->dev, " csc %u bpw %u delay %u speed %u\n", -+ xfer->cs_change, xfer->bits_per_word, -+ xfer->delay_usecs, xfer->speed_hz); -+ -+ if (bits || speed_hz) { -+ struct atmel_spi_device *asd; -+ u32 csr; -+ -+ if (atmel_spi_wait_idle(as, msg)) -+ return 0; -+ -+ asd = spi->controller_state; -+ csr = asd->csr; -+ -+ if (bits) -+ csr = SPI_BFINS(BITS, csr, bits - 8); -+ if (speed_hz) { -+ u32 scbr = DIV_ROUND_UP(as->base_hz, speed_hz); -+ csr = SPI_BFINS(SCBR, csr, scbr); -+ } -+ -+ atmel_spi_set_csr(as, spi, csr); -+ } - -- ret = IRQ_HANDLED; -+ if (!bits) -+ bits = spi->bits_per_word; - -- spi_writel(as, IDR, (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) -- | SPI_BIT(OVRES))); -+ /* PDC stuff starts here */ -+ while (submitted < xfer->len) { -+ unsigned long len; -+ -+ wait_event(as->wait, as->pending < 2); - - /* -- * When we get an overrun, we disregard the current -- * transfer. Data will not be copied back from any -- * bounce buffer and msg->actual_len will not be -- * updated with the last xfer. -- * -- * We will also not process any remaning transfers in -- * the message. -- * -- * First, stop the transfer and unmap the DMA buffers. -+ * This gives the RX side a slight advantage, making -+ * overruns less likely. - */ -- spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); -- if (!msg->is_dma_mapped) -- atmel_spi_dma_unmap_xfer(master, xfer); -+ spi_writel(as, PTCR, SPI_BIT(TXTDIS)); -+ -+ len = xfer->len - submitted; -+ if (xfer->rx_buf) { -+ rx_dma = xfer->rx_dma + submitted; -+ } else { -+ rx_dma = as->buffer_dma; -+ len = min(len, BUFFER_SIZE); -+ } -+ if (xfer->tx_buf) { -+ tx_dma = xfer->tx_dma + submitted; -+ } else { -+ tx_dma = as->buffer_dma; -+ len = min(len, BUFFER_SIZE); -+ memset(as->buffer, 0, len); -+ } -+ -+ submitted += len; -+ if (bits > 8) -+ len >>= 1; -+ -+ spin_lock_irq(&as->lock); -+ if (as->error) { -+ spin_unlock_irq(&as->lock); -+ atmel_spi_wait_idle(as, msg); -+ return 0; -+ } -+ -+ spi_writel(as, RNPR, rx_dma); -+ spi_writel(as, RNCR, len); -+ spi_writel(as, TNPR, tx_dma); -+ spi_writel(as, TNCR, len); -+ spi_writel(as, IER, SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) -+ | SPI_BIT(OVRES)); -+ spi_writel(as, PTCR, SPI_BIT(RXTEN) | SPI_BIT(TXTEN)); -+ as->pending++; -+ spin_unlock_irq(&as->lock); -+ } -+ -+ as->pending_bytes += submitted; - -- /* REVISIT: udelay in irq is unfriendly */ -+ if (xfer->delay_usecs || xfer->cs_change || xfer->bits_per_word -+ || xfer->speed_hz) { -+ struct atmel_spi_device *asd = spi->controller_state; -+ int err; -+ -+ err = atmel_spi_wait_idle(as, msg); - if (xfer->delay_usecs) - udelay(xfer->delay_usecs); -+ atmel_spi_set_csr(as, spi, asd->csr); -+ if (err) -+ return 0; - -- dev_warn(master->dev.parent, "overrun (%u/%u remaining)\n", -- spi_readl(as, TCR), spi_readl(as, RCR)); -+ if (xfer->cs_change && !atmel_spi_xfer_is_last(msg, xfer)) { -+ cs_deactivate(as, spi); -+ udelay(1); -+ cs_activate(as, spi); -+ } -+ } - -- /* -- * Clean up DMA registers and make sure the data -- * registers are empty. -- */ -- spi_writel(as, RNCR, 0); -- spi_writel(as, TNCR, 0); -- spi_writel(as, RCR, 0); -- spi_writel(as, TCR, 0); -- for (timeout = 1000; timeout; timeout--) -- if (spi_readl(as, SR) & SPI_BIT(TXEMPTY)) -- break; -- if (!timeout) -- dev_warn(master->dev.parent, -- "timeout waiting for TXEMPTY"); -- while (spi_readl(as, SR) & SPI_BIT(RDRF)) -- spi_readl(as, RDR); -+ return xfer->cs_change; -+} - -- /* Clear any overrun happening while cleaning up */ -- spi_readl(as, SR); -+#else /* Use DMA engine framework, not PDC */ - -- atmel_spi_msg_done(master, as, msg, -EIO, 0); -- } else if (pending & (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX))) { -- ret = IRQ_HANDLED; -+static void atmel_spi_dma_complete(void *param) -+{ -+ struct atmel_spi *as = param; - -- spi_writel(as, IDR, pending); -+ as->pending = 0; -+ as->sg_len = 0; -+ wake_up(&as->wait); -+} - -- if (as->current_remaining_bytes == 0) { -- msg->actual_length += xfer->len; -- -- if (!msg->is_dma_mapped) -- atmel_spi_dma_unmap_xfer(master, xfer); -- -- /* REVISIT: udelay in irq is unfriendly */ -- if (xfer->delay_usecs) -- udelay(xfer->delay_usecs); -- -- if (atmel_spi_xfer_is_last(msg, xfer)) { -- /* report completed message */ -- atmel_spi_msg_done(master, as, msg, 0, -- xfer->cs_change); -- } else { -- if (xfer->cs_change) { -- cs_deactivate(as, msg->spi); -- udelay(1); -- cs_activate(as, msg->spi); -- } -+static int atmel_spi_wait_idle(struct atmel_spi *as, struct spi_message *msg) -+{ -+ struct dma_chan *tx_chan = as->tx_chan; -+ struct dma_chan *rx_chan = as->rx_chan; -+ struct dma_device *dma = rx_chan->device; -+ struct dma_async_tx_descriptor *tx_desc; -+ struct dma_async_tx_descriptor *rx_desc; -+ int err; -+ -+ dev_vdbg(&msg->spi->dev, "wait_idle: sg_len=%u\n", as->sg_len); -+ -+ if (!as->sg_len) -+ return 0; -+ -+ sg_mark_end(as->tx_sg + (as->sg_len - 1)); -+ sg_mark_end(as->rx_sg + (as->sg_len - 1)); -+ as->pending = 1; -+ smp_wmb(); -+ -+ tx_desc = dma->device_prep_slave_sg(tx_chan, -+ as->tx_sg, as->sg_len, DMA_TO_DEVICE, -+ DMA_COMPL_SKIP_SRC_UNMAP | DMA_CTRL_ACK); -+ rx_desc = dma->device_prep_slave_sg(rx_chan, -+ as->rx_sg, as->sg_len, DMA_FROM_DEVICE, -+ DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP -+ | DMA_CTRL_ACK); -+ rx_desc->callback = atmel_spi_dma_complete; -+ rx_desc->callback_param = as; -+ rx_desc->tx_submit(rx_desc); -+ tx_desc->tx_submit(tx_desc); -+ dma->device_issue_pending(rx_chan); -+ dma->device_issue_pending(tx_chan); -+ -+ spi_writel(as, IER, SPI_BIT(OVRES)); -+ wait_event(as->wait, !as->pending); -+ spi_writel(as, IDR, SPI_BIT(OVRES)); -+ err = as->error; -+ if (err) { -+ dev_warn(&msg->spi->dev, "transfer error %d\n", err); -+ -+ dma->device_terminate_all(tx_chan); -+ dma->device_terminate_all(rx_chan); -+ -+ atmel_spi_handle_error(as, msg, err); -+ -+ return err; -+ } -+ -+ msg->actual_length += as->pending_bytes; -+ as->pending_bytes = 0; -+ sg_init_table(as->rx_sg, MAX_SG_SEGS); -+ sg_init_table(as->tx_sg, MAX_SG_SEGS); -+ -+ dev_vdbg(&msg->spi->dev, "controller idle, xfered so far: %u\n", -+ msg->actual_length); -+ -+ return 0; -+} -+ -+static int atmel_spi_submit_xfer(struct atmel_spi *as, struct spi_device *spi, -+ struct spi_message *msg, struct spi_transfer *xfer) -+{ -+ unsigned int bits = xfer->bits_per_word; -+ unsigned int speed_hz = xfer->speed_hz; -+ unsigned int submitted = 0; -+ unsigned int i; -+ -+ dev_vdbg(&spi->dev, "submit_xfer len %u rx %p tx %p\n", -+ xfer->len, xfer->rx_buf, xfer->tx_buf); -+ dev_vdbg(&spi->dev, " csc %u bpw %u delay %u speed %u\n", -+ xfer->cs_change, xfer->bits_per_word, -+ xfer->delay_usecs, xfer->speed_hz); -+ -+ if (bits || speed_hz) { -+ struct atmel_spi_device *asd; -+ u32 csr; -+ -+ if (atmel_spi_wait_idle(as, msg)) -+ return 0; -+ -+ asd = spi->controller_state; -+ csr = asd->csr; -+ -+ if (bits) -+ csr = SPI_BFINS(BITS, csr, bits - 8); -+ if (speed_hz) { -+ u32 scbr = DIV_ROUND_UP(as->base_hz, speed_hz); -+ csr = SPI_BFINS(SCBR, csr, scbr); -+ } -+ -+ atmel_spi_set_csr(as, spi, csr); -+ } -+ -+ if (!bits) -+ bits = spi->bits_per_word; -+ -+ i = as->sg_len; -+ while (submitted < xfer->len) { -+ unsigned long len; -+ -+ if (i == MAX_SG_SEGS) { -+ if (atmel_spi_wait_idle(as, msg)) -+ return 0; -+ i = 0; -+ } -+ -+ len = xfer->len - submitted; -+ if (!xfer->rx_buf || !xfer->tx_buf) -+ len = min(len, BUFFER_SIZE); -+ -+ if (xfer->rx_buf) { -+ sg_set_buf(&as->rx_sg[i], xfer->rx_buf + submitted, len); -+ as->rx_sg[i].dma_address = xfer->rx_dma + submitted; -+ } else { -+ sg_set_buf(&as->rx_sg[i], as->buffer, len); -+ as->rx_sg[i].dma_address = as->buffer_dma; -+ } -+ if (xfer->tx_buf) { -+ sg_set_buf(&as->tx_sg[i], xfer->tx_buf + submitted, len); -+ as->tx_sg[i].dma_address = xfer->tx_dma + submitted; -+ } else { -+ sg_set_buf(&as->tx_sg[i], as->buffer, len); -+ as->tx_sg[i].dma_address = as->buffer_dma; -+ memset(as->buffer, 0, len); -+ } - -- /* -- * Not done yet. Submit the next transfer. -- * -- * FIXME handle protocol options for xfer -- */ -- atmel_spi_next_xfer(master, msg); -+ submitted += len; -+ as->sg_len = ++i; -+ } -+ -+ as->pending_bytes += submitted; -+ -+ if (xfer->delay_usecs || xfer->cs_change || xfer->bits_per_word -+ || xfer->speed_hz) { -+ struct atmel_spi_device *asd = spi->controller_state; -+ int err; -+ -+ err = atmel_spi_wait_idle(as, msg); -+ if (xfer->delay_usecs) -+ udelay(xfer->delay_usecs); -+ atmel_spi_set_csr(as, spi, asd->csr); -+ if (err) -+ return 0; -+ -+ if (xfer->cs_change && !atmel_spi_xfer_is_last(msg, xfer)) { -+ cs_deactivate(as, spi); -+ udelay(1); -+ cs_activate(as, spi); -+ } -+ } -+ -+ return xfer->cs_change; -+} -+ -+#endif /* PDC vs. DMA engine */ -+ -+static void atmel_spi_work(struct work_struct *work) -+{ -+ struct atmel_spi *as; -+ -+ as = container_of(work, struct atmel_spi, work); -+ -+ spin_lock_irq(&as->lock); -+ while (!list_empty(&as->queue)) { -+ struct spi_message *msg; -+ struct spi_transfer *xfer; -+ struct spi_device *spi; -+ int cs_change = 0; -+ -+ if (as->stopping) -+ break; -+ -+ msg = list_entry(as->queue.next, struct spi_message, queue); -+ spin_unlock_irq(&as->lock); -+ -+ spi = msg->spi; -+ -+ if (as->stay) { -+ if (as->stay != spi) { -+ cs_deactivate(as, as->stay); -+ cs_activate(as, spi); - } -+ as->stay = NULL; - } else { -- /* -- * Keep going, we still have data to send in -- * the current transfer. -- */ -- atmel_spi_next_xfer(master, msg); -+ cs_activate(as, spi); -+ } -+ -+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC -+ sg_init_table(as->rx_sg, MAX_SG_SEGS); -+ sg_init_table(as->tx_sg, MAX_SG_SEGS); -+#endif -+ -+ list_for_each_entry(xfer, &msg->transfers, transfer_list) { -+ if (msg->status != -EINPROGRESS) -+ break; -+ cs_change = atmel_spi_submit_xfer(as, spi, msg, xfer); -+ } -+ -+ if (msg->status == -EINPROGRESS) { -+ if (atmel_spi_wait_idle(as, msg)) -+ cs_change = 1; -+ else -+ msg->status = 0; - } -+ if (!cs_change) -+ cs_deactivate(as, spi); -+ else -+ as->stay = spi; -+ -+ atmel_spi_dma_unmap_msg(as, msg); -+ -+ msg->complete(msg->context); -+ spin_lock_irq(&as->lock); -+ list_del(&msg->queue); -+ } -+ spin_unlock_irq(&as->lock); -+} -+ -+static irqreturn_t atmel_spi_interrupt(int irq, void *dev_id) -+{ -+ struct atmel_spi *as = dev_id; -+ u32 status; -+ u32 mask; -+ u32 pending; -+ -+ spin_lock(&as->lock); -+ -+ status = spi_readl(as, SR); -+ mask = spi_readl(as, IMR); -+ pending = status & mask; -+ -+ if (pending & SPI_BIT(OVRES)) { -+#ifdef CONFIG_SPI_ATMEL_HAVE_PDC -+ spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); -+#endif -+ spi_writel(as, IDR, ~0UL); -+ as->error = -EIO; -+ as->pending = 0; -+#ifdef CONFIG_SPI_ATMEL_HAVE_PDC -+ } else if (pending & SPI_BIT(RXBUFF)) { -+ spi_writel(as, IDR, ~0UL); -+ as->pending = 0; -+ } else if (pending & SPI_BIT(ENDRX)) { -+ spi_writel(as, IDR, SPI_BIT(ENDRX)); -+ as->pending--; -+#endif -+ } else { -+ dev_err(&as->pdev->dev, -+ "unexpected interrupt: SR=0x%08x MR=0x%08x\n", -+ status, mask); -+ spi_writel(as, IDR, pending); - } - -+ spi_readl(as, IMR); -+ wake_up(&as->wait); -+ - spin_unlock(&as->lock); - -- return ret; -+ return IRQ_HANDLED; - } - - /* the spi->mode bits understood by this driver: */ -@@ -502,6 +939,7 @@ atmel_spi_interrupt(int irq, void *dev_id) - static int atmel_spi_setup(struct spi_device *spi) - { - struct atmel_spi *as; -+ struct atmel_spi_device *asd; - u32 scbr, csr; - unsigned int bits = spi->bits_per_word; - unsigned long bus_hz; -@@ -536,21 +974,14 @@ static int atmel_spi_setup(struct spi_device *spi) - } - - /* see notes above re chipselect */ -- if (cpu_is_at91rm9200() -+ if (!atmel_spi_is_v2() - && spi->chip_select == 0 - && (spi->mode & SPI_CS_HIGH)) { - dev_dbg(&spi->dev, "setup: can't be active-high\n"); - return -EINVAL; - } - -- /* -- * Pre-new_1 chips start out at half the peripheral -- * bus speed. -- */ -- bus_hz = clk_get_rate(as->clk); -- if (!as->new_1) -- bus_hz /= 2; -- -+ bus_hz = as->base_hz; - if (spi->max_speed_hz) { - /* - * Calculate the lowest divider that satisfies the -@@ -589,11 +1020,20 @@ static int atmel_spi_setup(struct spi_device *spi) - - /* chipselect must have been muxed as GPIO (e.g. in board setup) */ - npcs_pin = (unsigned int)spi->controller_data; -- if (!spi->controller_state) { -+ asd = spi->controller_state; -+ if (!asd) { -+ asd = kzalloc(sizeof(struct atmel_spi_device), GFP_KERNEL); -+ if (!asd) -+ return -ENOMEM; -+ - ret = gpio_request(npcs_pin, spi->dev.bus_id); -- if (ret) -+ if (ret) { -+ kfree(asd); - return ret; -- spi->controller_state = (void *)npcs_pin; -+ } -+ -+ asd->npcs_pin = npcs_pin; -+ spi->controller_state = asd; - gpio_direction_output(npcs_pin, !(spi->mode & SPI_CS_HIGH)); - } else { - unsigned long flags; -@@ -605,11 +1045,14 @@ static int atmel_spi_setup(struct spi_device *spi) - spin_unlock_irqrestore(&as->lock, flags); - } - -+ asd->csr = csr; -+ - dev_dbg(&spi->dev, - "setup: %lu Hz bpw %u mode 0x%x -> csr%d %08x\n", - bus_hz / scbr, bits, spi->mode, spi->chip_select, csr); - -- spi_writel(as, CSR0 + 4 * spi->chip_select, csr); -+ if (!atmel_spi_is_v2()) -+ spi_writel(as, CSR0 + 4 * spi->chip_select, csr); - - return 0; - } -@@ -620,74 +1063,81 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) - struct spi_transfer *xfer; - unsigned long flags; - struct device *controller = spi->master->dev.parent; -+ int ret; - - as = spi_master_get_devdata(spi->master); - -- dev_dbg(controller, "new message %p submitted for %s\n", -+ dev_vdbg(controller, "new message %p submitted for %s\n", - msg, spi->dev.bus_id); - - if (unlikely(list_empty(&msg->transfers) - || !spi->max_speed_hz)) - return -EINVAL; - -- if (as->stopping) -- return -ESHUTDOWN; -- - list_for_each_entry(xfer, &msg->transfers, transfer_list) { - if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) { - dev_dbg(&spi->dev, "missing rx or tx buf\n"); - return -EINVAL; - } - -- /* FIXME implement these protocol options!! */ -- if (xfer->bits_per_word || xfer->speed_hz) { -- dev_dbg(&spi->dev, "no protocol options yet\n"); -- return -ENOPROTOOPT; -+ if (xfer->bits_per_word && (xfer->bits_per_word < 8 -+ || xfer->bits_per_word > 16)) { -+ dev_dbg(&spi->dev, "unsupported bits_per_word\n"); -+ return -EINVAL; -+ } -+ if (xfer->speed_hz) { -+ unsigned long divider; -+ divider = DIV_ROUND_UP(as->base_hz, xfer->speed_hz); -+ -+ if (divider > 255) { -+ dev_dbg(&spi->dev, "speed_hz too low\n"); -+ return -EINVAL; -+ } - } - - /* - * DMA map early, for performance (empties dcache ASAP) and - * better fault reporting. This is a DMA-only driver. -- * -- * NOTE that if dma_unmap_single() ever starts to do work on -- * platforms supported by this driver, we would need to clean -- * up mappings for previously-mapped transfers. - */ - if (!msg->is_dma_mapped) { -- if (atmel_spi_dma_map_xfer(as, xfer) < 0) -+ if (atmel_spi_dma_map_xfer(as, xfer) < 0) { -+ /* Ick */ -+ while (xfer->transfer_list.prev != &msg->transfers) { -+ xfer = list_entry(xfer->transfer_list.prev, -+ struct spi_transfer, -+ transfer_list); -+ atmel_spi_dma_unmap_xfer(as, xfer); -+ } -+ - return -ENOMEM; -+ } - } - } - --#ifdef VERBOSE -- list_for_each_entry(xfer, &msg->transfers, transfer_list) { -- dev_dbg(controller, -- " xfer %p: len %u tx %p/%08x rx %p/%08x\n", -- xfer, xfer->len, -- xfer->tx_buf, xfer->tx_dma, -- xfer->rx_buf, xfer->rx_dma); -- } --#endif -- - msg->status = -EINPROGRESS; - msg->actual_length = 0; - - spin_lock_irqsave(&as->lock, flags); -- list_add_tail(&msg->queue, &as->queue); -- if (!as->current_transfer) -- atmel_spi_next_message(spi->master); -+ if (as->stopping) { -+ ret = -ESHUTDOWN; -+ } else { -+ list_add_tail(&msg->queue, &as->queue); -+ queue_work(as->workqueue, &as->work); -+ ret = 0; -+ } - spin_unlock_irqrestore(&as->lock, flags); - -- return 0; -+ return ret; - } - - static void atmel_spi_cleanup(struct spi_device *spi) - { - struct atmel_spi *as = spi_master_get_devdata(spi->master); -+ struct atmel_spi_device *asd = spi->controller_state; - unsigned gpio = (unsigned) spi->controller_data; - unsigned long flags; - -- if (!spi->controller_state) -+ if (!asd) - return; - - spin_lock_irqsave(&as->lock, flags); -@@ -697,14 +1147,131 @@ static void atmel_spi_cleanup(struct spi_device *spi) - } - spin_unlock_irqrestore(&as->lock, flags); - -+ spi->controller_state = NULL; - gpio_free(gpio); -+ kfree(asd); -+} -+ -+static void atmel_spi_stop_queue(struct atmel_spi *as) -+{ -+ struct spi_message *msg; -+ -+ /* -+ * Prevent any new messages from being submitted, cancel any -+ * submitted but not-yet-started messages, and wait for any -+ * ongoing messages to complete. -+ */ -+ as->stopping = true; -+ smp_wmb(); -+ cancel_work_sync(&as->work); -+ -+ /* Terminate anything that was left over */ -+ list_for_each_entry(msg, &as->queue, queue) { -+ atmel_spi_dma_unmap_msg(as, msg); -+ msg->status = -ESHUTDOWN; -+ msg->complete(msg->context); -+ } -+} -+ -+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC -+static enum dma_state_client atmel_spi_dma_chan_avail(struct atmel_spi *as, -+ struct dma_chan *chan, struct dma_chan **pchan) -+{ -+ enum dma_state_client ret = DMA_NAK; -+ -+ if (!*pchan) { -+ as->stopping = false; -+ *pchan = chan; -+ ret = DMA_ACK; -+ } -+ -+ return ret; -+} -+ -+static enum dma_state_client atmel_spi_dma_chan_removed(struct atmel_spi *as, -+ struct dma_chan *chan, struct dma_chan **pchan) -+{ -+ enum dma_state_client ret = DMA_NAK; -+ -+ if (chan == *pchan) { -+ atmel_spi_stop_queue(as); -+ *pchan = NULL; -+ ret = DMA_ACK; -+ } -+ -+ return ret; - } - -+static enum dma_state_client atmel_spi_dma_rx_event(struct dma_client *client, -+ struct dma_chan *chan, enum dma_state state) -+{ -+ struct atmel_spi *as; -+ enum dma_state_client ret = DMA_NAK; -+ -+ as = container_of(client, struct atmel_spi, rx_client); -+ -+ switch (state) { -+ case DMA_RESOURCE_AVAILABLE: -+ ret = atmel_spi_dma_chan_avail(as, chan, &as->rx_chan); -+ if (ret == DMA_ACK) -+ dev_info(&as->pdev->dev, -+ "Using %s for DMA RX transfers\n", -+ chan->dev.bus_id); -+ break; -+ -+ case DMA_RESOURCE_REMOVED: -+ ret = atmel_spi_dma_chan_removed(as, chan, &as->rx_chan); -+ if (ret == DMA_ACK) -+ dev_info(&as->pdev->dev, "Lost %s, queue stopped\n", -+ chan->dev.bus_id); -+ break; -+ -+ default: -+ break; -+ } -+ -+ return ret; -+} -+ -+static enum dma_state_client atmel_spi_dma_tx_event(struct dma_client *client, -+ struct dma_chan *chan, enum dma_state state) -+{ -+ struct atmel_spi *as; -+ enum dma_state_client ret = DMA_NAK; -+ -+ as = container_of(client, struct atmel_spi, tx_client); -+ -+ switch (state) { -+ case DMA_RESOURCE_AVAILABLE: -+ ret = atmel_spi_dma_chan_avail(as, chan, &as->tx_chan); -+ if (ret == DMA_ACK) -+ dev_info(&as->pdev->dev, -+ "Using %s for DMA TX transfers\n", -+ chan->dev.bus_id); -+ break; -+ -+ case DMA_RESOURCE_REMOVED: -+ ret = atmel_spi_dma_chan_removed(as, chan, &as->tx_chan); -+ if (ret == DMA_ACK) -+ dev_info(&as->pdev->dev, "Lost %s, queue stopped\n", -+ chan->dev.bus_id); -+ break; -+ -+ default: -+ break; -+ } -+ -+ return ret; -+} -+#endif -+ - /*-------------------------------------------------------------------------*/ - - static int __init atmel_spi_probe(struct platform_device *pdev) - { - struct resource *regs; -+ struct resource *buf; -+ struct atmel_spi_pdata *pdata; - int irq; - struct clk *clk; - int ret; -@@ -719,6 +1286,14 @@ static int __init atmel_spi_probe(struct platform_device *pdev) - if (irq < 0) - return irq; - -+ pdata = pdev->dev.platform_data; -+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC -+ if (!pdata) { -+ dev_dbg(&pdev->dev, "no platform data\n"); -+ return -ENXIO; -+ } -+#endif -+ - clk = clk_get(&pdev->dev, "spi_clk"); - if (IS_ERR(clk)) - return PTR_ERR(clk); -@@ -738,31 +1313,65 @@ static int __init atmel_spi_probe(struct platform_device *pdev) - - as = spi_master_get_devdata(master); - -- /* -- * Scratch buffer is used for throwaway rx and tx data. -- * It's coherent to minimize dcache pollution. -- */ -- as->buffer = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE, -- &as->buffer_dma, GFP_KERNEL); -- if (!as->buffer) -- goto out_free; -+ buf = platform_get_resource(pdev, IORESOURCE_MEM, 1); -+ if (buf) { -+ as->buffer_dma = buf->start; -+ as->buffer_size -+ = rounddown_pow_of_two(buf->end - buf->start + 1); -+ if (as->buffer_size) { -+ as->buffer = (void __force *)ioremap(buf->start, -+ as->buffer_size); -+ if (as->buffer) -+ as->always_bounce = true; -+ } -+ } -+ -+ if (!as->buffer) { -+ /* -+ * Scratch buffer is used for throwaway rx and tx data. -+ * It's coherent to minimize dcache pollution. -+ */ -+ as->buffer = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE, -+ &as->buffer_dma, GFP_KERNEL); -+ if (!as->buffer) -+ goto out_free; -+ } - - spin_lock_init(&as->lock); -+ init_waitqueue_head(&as->wait); - INIT_LIST_HEAD(&as->queue); -+ INIT_WORK(&as->work, atmel_spi_work); - as->pdev = pdev; -+ as->clk = clk; - as->regs = ioremap(regs->start, (regs->end - regs->start) + 1); - if (!as->regs) - goto out_free_buffer; -- as->irq = irq; -- as->clk = clk; -- if (!cpu_is_at91rm9200()) -- as->new_1 = 1; - -- ret = request_irq(irq, atmel_spi_interrupt, 0, -- pdev->dev.bus_id, master); -+ ret = request_irq(irq, atmel_spi_interrupt, 0, pdev->dev.bus_id, as); - if (ret) - goto out_unmap_regs; - -+ as->workqueue = create_singlethread_workqueue(pdev->dev.bus_id); -+ if (!as->workqueue) -+ goto out_free_irq; -+ -+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC -+ as->rx_client.event_callback = atmel_spi_dma_rx_event; -+ dma_cap_set(DMA_SLAVE, as->rx_client.cap_mask); -+ as->rx_client.slave = pdata->rx_dma_slave; -+ pdata->rx_dma_slave->rx_reg = regs->start + SPI_RDR + 3; -+ -+ as->tx_client.event_callback = atmel_spi_dma_tx_event; -+ dma_cap_set(DMA_SLAVE, as->tx_client.cap_mask); -+ as->tx_client.slave = pdata->tx_dma_slave; -+ pdata->tx_dma_slave->tx_reg = regs->start + SPI_TDR + 3; -+ -+ dma_async_client_register(&as->rx_client); -+ dma_async_client_register(&as->tx_client); -+ dma_async_client_chan_request(&as->rx_client); -+ dma_async_client_chan_request(&as->tx_client); -+#endif -+ - /* Initialize the hardware */ - clk_enable(clk); - spi_writel(as, CR, SPI_BIT(SWRST)); -@@ -770,9 +1379,19 @@ static int __init atmel_spi_probe(struct platform_device *pdev) - spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); - spi_writel(as, CR, SPI_BIT(SPIEN)); - -+ /* v1 chips start out at half the peripheral bus speed. */ -+ as->base_hz = clk_get_rate(clk); -+ if (!atmel_spi_is_v2()) -+ as->base_hz /= 2; -+ - /* go! */ - dev_info(&pdev->dev, "Atmel SPI Controller at 0x%08lx (irq %d)\n", - (unsigned long)regs->start, irq); -+ if (as->always_bounce) -+ dev_info(&pdev->dev, "Using bounce buffer at 0x%08x len %zu\n", -+ as->buffer_dma, as->buffer_size); -+ -+ atmel_spi_init_debugfs(as); - - ret = spi_register_master(master); - if (ret) -@@ -781,9 +1400,16 @@ static int __init atmel_spi_probe(struct platform_device *pdev) - return 0; - - out_reset_hw: -+ atmel_spi_cleanup_debugfs(as); - spi_writel(as, CR, SPI_BIT(SWRST)); - clk_disable(clk); -- free_irq(irq, master); -+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC -+ dma_async_client_unregister(&as->tx_client); -+ dma_async_client_unregister(&as->rx_client); -+#endif -+ destroy_workqueue(as->workqueue); -+out_free_irq: -+ free_irq(irq, as); - out_unmap_regs: - iounmap(as->regs); - out_free_buffer: -@@ -799,33 +1425,34 @@ static int __exit atmel_spi_remove(struct platform_device *pdev) - { - struct spi_master *master = platform_get_drvdata(pdev); - struct atmel_spi *as = spi_master_get_devdata(master); -- struct spi_message *msg; - -- /* reset the hardware and block queue progress */ -- spin_lock_irq(&as->lock); -- as->stopping = 1; -- spi_writel(as, CR, SPI_BIT(SWRST)); -- spi_readl(as, SR); -- spin_unlock_irq(&as->lock); -+ /* Stop the queue */ -+ atmel_spi_stop_queue(as); - -- /* Terminate remaining queued transfers */ -- list_for_each_entry(msg, &as->queue, queue) { -- /* REVISIT unmapping the dma is a NOP on ARM and AVR32 -- * but we shouldn't depend on that... -- */ -- msg->status = -ESHUTDOWN; -- msg->complete(msg->context); -- } -+ atmel_spi_cleanup_debugfs(as); - -- dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer, -- as->buffer_dma); -+ /* Shut down the hardware */ -+ spi_writel(as, CR, SPI_BIT(SWRST)); -+ spi_readl(as, SR); - -+ /* Clean up */ -+ spi_unregister_master(master); -+ free_irq(platform_get_irq(pdev, 0), as); -+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC -+ dma_async_client_unregister(&as->tx_client); -+ dma_async_client_unregister(&as->rx_client); -+#endif -+ destroy_workqueue(as->workqueue); -+ if (as->always_bounce) -+ iounmap((void __iomem __force *)as->buffer); -+ else -+ dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer, -+ as->buffer_dma); -+ iounmap(as->regs); - clk_disable(as->clk); - clk_put(as->clk); -- free_irq(as->irq, master); -- iounmap(as->regs); - -- spi_unregister_master(master); -+ spi_master_put(master); - - return 0; - } -@@ -837,7 +1464,9 @@ static int atmel_spi_suspend(struct platform_device *pdev, pm_message_t mesg) - struct spi_master *master = platform_get_drvdata(pdev); - struct atmel_spi *as = spi_master_get_devdata(master); - -+ atmel_spi_stop_queue(as); - clk_disable(as->clk); -+ - return 0; - } - -@@ -847,6 +1476,9 @@ static int atmel_spi_resume(struct platform_device *pdev) - struct atmel_spi *as = spi_master_get_devdata(master); - - clk_enable(as->clk); -+ as->stopping = false; -+ smp_wmb(); -+ - return 0; - } - -@@ -868,7 +1500,12 @@ static struct platform_driver atmel_spi_driver = { - - static int __init atmel_spi_init(void) - { -- return platform_driver_probe(&atmel_spi_driver, atmel_spi_probe); -+ int ret; -+ -+ ret = platform_driver_probe(&atmel_spi_driver, atmel_spi_probe); -+ if (ret) -+ pr_notice("atmel_spi probe failed: %d\n", ret); -+ return ret; - } - module_init(atmel_spi_init); - -@@ -879,6 +1516,6 @@ static void __exit atmel_spi_exit(void) - module_exit(atmel_spi_exit); - - MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver"); --MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); --MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>"); -+MODULE_LICENSE("GPL v2"); - MODULE_ALIAS("platform:atmel_spi"); -diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig -index bcefbdd..6882a7d 100644 ---- a/drivers/usb/Kconfig -+++ b/drivers/usb/Kconfig -@@ -37,6 +37,8 @@ config USB_ARCH_HAS_OHCI - default y if ARCH_EP93XX - default y if ARCH_AT91 - default y if ARCH_PNX4008 -+ # AVR32 -+ default y if AVR32 - # PPC: - default y if STB03xxx - default y if PPC_MPC52xx -@@ -55,6 +57,7 @@ config USB_ARCH_HAS_EHCI - default y if PPC_83xx - default y if SOC_AU1200 - default y if ARCH_IXP4XX -+ default y if AVR32 - default PCI - - # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. -diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig -index 228797e..8c48773 100644 ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -73,12 +73,12 @@ config USB_EHCI_TT_NEWSCHED - - config USB_EHCI_BIG_ENDIAN_MMIO - bool -- depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX) -+ depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX || AVR32) - default y - - config USB_EHCI_BIG_ENDIAN_DESC - bool -- depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX) -+ depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || AVR32) - default y - - config USB_EHCI_FSL -@@ -208,17 +208,19 @@ config USB_OHCI_HCD_SSB - config USB_OHCI_BIG_ENDIAN_DESC - bool - depends on USB_OHCI_HCD -+ default y if AVR32 - default n - - config USB_OHCI_BIG_ENDIAN_MMIO - bool - depends on USB_OHCI_HCD -+ default y if AVR32 - default n - - config USB_OHCI_LITTLE_ENDIAN - bool - depends on USB_OHCI_HCD -- default n if STB03xxx || PPC_MPC52xx -+ default n if STB03xxx || PPC_MPC52xx || AVR32 - default y - - config USB_UHCI_HCD -diff --git a/drivers/usb/host/ehci-avr32.c b/drivers/usb/host/ehci-avr32.c -new file mode 100644 -index 0000000..7cd0591 ---- /dev/null -+++ b/drivers/usb/host/ehci-avr32.c -@@ -0,0 +1,213 @@ -+/* -+ * AVR32 EHCI bus and power management glue -+ * -+ * Copyright (C) 2008 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+#include <linux/clk.h> -+#include <linux/device.h> -+#include <linux/init.h> -+#include <linux/interrupt.h> -+#include <linux/ioport.h> -+#include <linux/platform_device.h> -+ -+static struct clk *utmi_clk; -+static struct clk *hclk; -+ -+static void ehci_avr32_start_clocks(struct device *dev) -+{ -+ dev_vdbg(dev, "starting clocks...\n"); -+ -+ clk_enable(utmi_clk); -+ clk_enable(hclk); -+} -+ -+static void ehci_avr32_stop_clocks(struct device *dev) -+{ -+ dev_vdbg(dev, "stopping clocks...\n"); -+ -+ clk_disable(hclk); -+ clk_disable(utmi_clk); -+} -+ -+static int ehci_avr32_setup(struct usb_hcd *hcd) -+{ -+ struct device *dev = hcd->self.controller; -+ struct ehci_hcd *ehci = hcd_to_ehci(hcd); -+ int ret; -+ -+ ehci_avr32_start_clocks(dev); -+ -+ ehci->caps = hcd->regs; -+ ehci->regs = hcd->regs -+ + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); -+ dbg_hcs_params(ehci, "reset"); -+ dbg_hcc_params(ehci, "reset"); -+ -+ /* cache this readonly data; minimize chip reads */ -+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); -+ -+ ret = ehci_halt(ehci); -+ if (ret) -+ goto err; -+ -+ /* data structure init */ -+ ret = ehci_init(hcd); -+ if (ret) -+ goto err; -+ -+ ehci->sbrn = 0x20; -+ ehci_port_power(ehci, 0); -+ -+ return 0; -+ -+err: -+ ehci_avr32_stop_clocks(dev); -+ return ret; -+} -+ -+static void ehci_avr32_shutdown(struct usb_hcd *hcd) -+{ -+ ehci_shutdown(hcd); -+ ehci_avr32_stop_clocks(hcd->self.controller); -+} -+ -+static const struct hc_driver ehci_avr32_hc_driver = { -+ .description = hcd_name, -+ .product_desc = "AVR32 USBH (EHCI)", -+ .hcd_priv_size = sizeof(struct ehci_hcd), -+ -+ .irq = ehci_irq, -+ .flags = HCD_MEMORY | HCD_USB2, -+ -+ .reset = ehci_avr32_setup, -+ .start = ehci_run, -+ .stop = ehci_stop, -+ .shutdown = ehci_avr32_shutdown, -+ -+ .urb_enqueue = ehci_urb_enqueue, -+ .urb_dequeue = ehci_urb_dequeue, -+ .endpoint_disable = ehci_endpoint_disable, -+ -+ .get_frame_number = ehci_get_frame, -+ -+ .hub_status_data = ehci_hub_status_data, -+ .hub_control = ehci_hub_control, -+ .bus_suspend = ehci_bus_suspend, -+ .bus_resume = ehci_bus_resume, -+ .relinquish_port = ehci_relinquish_port, -+ .port_handed_over = ehci_port_handed_over, -+}; -+ -+static int ehci_avr32_probe(struct platform_device *pdev) -+{ -+ struct resource *reg_res; -+ struct usb_hcd *hcd; -+ struct ehci_hcd *ehci; -+ int irq; -+ int ret; -+ -+ reg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!reg_res) { -+ dev_dbg(&pdev->dev, "no MMIO resource\n"); -+ return -ENXIO; -+ } -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) { -+ dev_dbg(&pdev->dev, "no IRQ resource\n"); -+ return -ENXIO; -+ } -+ -+ hclk = clk_get(&pdev->dev, "hclk"); -+ if (IS_ERR(hclk)) { -+ dev_dbg(&pdev->dev, "no HSB clock\n"); -+ return -ENXIO; -+ } -+ utmi_clk = clk_get(&pdev->dev, "utmi_clk"); -+ if (IS_ERR(utmi_clk)) { -+ dev_dbg(&pdev->dev, "no UTMI clock\n"); -+ ret = -ENXIO; -+ goto err_utmi_clk; -+ } -+ -+ if (!request_mem_region(reg_res->start, -+ reg_res->end - reg_res->start + 1, -+ hcd_name)) { -+ dev_dbg(&pdev->dev, "config regs busy\n"); -+ ret = -EBUSY; -+ goto err_request_mmio; -+ } -+ -+ ret = -ENOMEM; -+ -+ hcd = usb_create_hcd(&ehci_avr32_hc_driver, &pdev->dev, "ehci-avr32"); -+ if (!hcd) { -+ dev_dbg(&pdev->dev, "failed to create hcd\n"); -+ goto err_create_hcd; -+ } -+ -+ hcd->rsrc_start = reg_res->start; -+ hcd->rsrc_len = reg_res->end - reg_res->start + 1; -+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); -+ if (!hcd->regs) { -+ dev_dbg(&pdev->dev, "failed to map registers\n"); -+ goto err_ioremap; -+ } -+ -+ ehci = hcd_to_ehci(hcd); -+ ehci->big_endian_mmio = 1; -+ ehci->big_endian_desc = 1; -+ -+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); -+ if (ret) -+ goto err_add_hcd; -+ -+ return 0; -+ -+err_add_hcd: -+ iounmap(hcd->regs); -+err_ioremap: -+ usb_put_hcd(hcd); -+err_create_hcd: -+ release_mem_region(reg_res->start, reg_res->end - reg_res->start + 1); -+err_request_mmio: -+ clk_put(utmi_clk); -+err_utmi_clk: -+ clk_put(hclk); -+ -+ return ret; -+} -+ -+static int ehci_avr32_remove(struct platform_device *pdev) -+{ -+ struct usb_hcd *hcd = platform_get_drvdata(pdev); -+ -+ platform_set_drvdata(pdev, NULL); -+ usb_remove_hcd(hcd); -+ iounmap(hcd->regs); -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+ usb_put_hcd(hcd); -+ clk_put(utmi_clk); -+ clk_put(hclk); -+ -+ return 0; -+} -+ -+/* FIXME */ -+#define ehci_avr32_suspend NULL -+#define ehci_avr32_resume NULL -+ -+static struct platform_driver ehci_hcd_avr32_driver = { -+ .probe = ehci_avr32_probe, -+ .remove = ehci_avr32_remove, -+ .suspend = ehci_avr32_suspend, -+ .resume = ehci_avr32_resume, -+ .shutdown = usb_hcd_platform_shutdown, -+ .driver = { -+ .name = "ehci", -+ }, -+}; -diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c -index 86e38b0..15e3956 100644 ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -1015,6 +1015,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ehci_hcd_au1xxx_driver - #endif - -+#ifdef CONFIG_AVR32 -+#include "ehci-avr32.c" -+#define PLATFORM_DRIVER ehci_hcd_avr32_driver -+#endif -+ - #ifdef CONFIG_PPC_PS3 - #include "ehci-ps3.c" - #define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver -diff --git a/drivers/usb/host/ohci-avr32.c b/drivers/usb/host/ohci-avr32.c -new file mode 100644 -index 0000000..67f25d6 ---- /dev/null -+++ b/drivers/usb/host/ohci-avr32.c -@@ -0,0 +1,208 @@ -+/* -+ * AVR32 OHCI bus and power management glue -+ * -+ * Copyright (C) 2008 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+#include <linux/clk.h> -+#include <linux/device.h> -+#include <linux/init.h> -+#include <linux/interrupt.h> -+#include <linux/ioport.h> -+#include <linux/platform_device.h> -+ -+/* Grr! The core layer doesn't let us keep private data anywhere! */ -+static struct clk *ohci_clk; -+static struct clk *utmi_clk; -+static struct clk *hclk; -+ -+static void ohci_avr32_start_clocks(struct device *dev) -+{ -+ dev_vdbg(dev, "starting clocks...\n"); -+ -+ clk_enable(ohci_clk); -+ clk_enable(utmi_clk); -+ clk_enable(hclk); -+} -+ -+static void ohci_avr32_stop_clocks(struct device *dev) -+{ -+ dev_vdbg(dev, "stopping clocks...\n"); -+ -+ clk_disable(hclk); -+ clk_disable(utmi_clk); -+ clk_disable(ohci_clk); -+} -+ -+static int ohci_avr32_start(struct usb_hcd *hcd) -+{ -+ struct device *dev = hcd->self.controller; -+ struct ohci_hcd *ohci = hcd_to_ohci(hcd); -+ int ret; -+ -+ ohci_avr32_start_clocks(dev); -+ -+ ret = ohci_init(ohci); -+ if (ret) -+ goto err_ohci_init; -+ -+ ret = ohci_run(ohci); -+ if (likely(!ret)) -+ return 0; -+ -+ ohci_stop(hcd); -+ -+err_ohci_init: -+ ohci_avr32_stop_clocks(dev); -+ return ret; -+} -+ -+static void ohci_avr32_stop(struct usb_hcd *hcd) -+{ -+ ohci_stop(hcd); -+ ohci_avr32_stop_clocks(hcd->self.controller); -+} -+ -+static const struct hc_driver ohci_avr32_hc_driver = { -+ .description = hcd_name, -+ .product_desc = "AVR32 USBH (OHCI)", -+ .hcd_priv_size = sizeof(struct ohci_hcd), -+ -+ .irq = ohci_irq, -+ .flags = HCD_USB11 | HCD_MEMORY, -+ -+ .start = ohci_avr32_start, -+ .stop = ohci_avr32_stop, -+ .shutdown = ohci_shutdown, -+ -+ .urb_enqueue = ohci_urb_enqueue, -+ .urb_dequeue = ohci_urb_dequeue, -+ .endpoint_disable = ohci_endpoint_disable, -+ .get_frame_number = ohci_get_frame, -+ .hub_status_data = ohci_hub_status_data, -+ .hub_control = ohci_hub_control, -+#ifdef CONFIG_PM -+ .bus_suspend = ohci_bus_suspend, -+ .bus_resume = ohci_bus_resume, -+#endif -+ .start_port_reset = ohci_start_port_reset, -+}; -+ -+static int ohci_avr32_probe(struct platform_device *pdev) -+{ -+ struct resource *regs; -+ struct usb_hcd *hcd; -+ int irq; -+ int ret; -+ -+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!regs) { -+ dev_dbg(&pdev->dev, "no MMIO resource\n"); -+ return -ENXIO; -+ } -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) { -+ dev_dbg(&pdev->dev, "no IRQ resource\n"); -+ return -ENXIO; -+ } -+ -+ hclk = clk_get(&pdev->dev, "hclk"); -+ if (IS_ERR(hclk)) { -+ dev_dbg(&pdev->dev, "no HSB clock\n"); -+ return -ENXIO; -+ } -+ utmi_clk = clk_get(&pdev->dev, "utmi_clk"); -+ if (IS_ERR(utmi_clk)) { -+ dev_dbg(&pdev->dev, "no UTMI clock\n"); -+ ret = -ENXIO; -+ goto err_utmi_clk; -+ } -+ ohci_clk = clk_get(&pdev->dev, "ohci_clk"); -+ if (IS_ERR(ohci_clk)) { -+ dev_dbg(&pdev->dev, "no OHCI clock\n"); -+ ret = -ENXIO; -+ goto err_ohci_clk; -+ } -+ -+ if (!request_mem_region(regs->start, regs->end - regs->start + 1, -+ hcd_name)) { -+ dev_dbg(&pdev->dev, "config regs busy\n"); -+ ret = -EBUSY; -+ goto err_request_mmio; -+ } -+ -+ ret = -ENOMEM; -+ hcd = usb_create_hcd(&ohci_avr32_hc_driver, &pdev->dev, "ohci-avr32"); -+ if (!hcd) { -+ dev_dbg(&pdev->dev, "failed to create hcd\n"); -+ goto err_create_hcd; -+ } -+ -+ hcd->rsrc_start = regs->start; -+ hcd->rsrc_len = regs->end - regs->start + 1; -+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); -+ if (!hcd->regs) { -+ dev_dbg(&pdev->dev, "failed to map registers\n"); -+ goto err_ioremap; -+ } -+ -+ ohci_hcd_init(hcd_to_ohci(hcd)); -+ -+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); -+ if (ret) -+ goto err_add_hcd; -+ -+ return 0; -+ -+err_add_hcd: -+ iounmap(hcd->regs); -+err_ioremap: -+ usb_put_hcd(hcd); -+err_create_hcd: -+ release_mem_region(regs->start, regs->end - regs->start + 1); -+err_request_mmio: -+ clk_put(ohci_clk); -+err_ohci_clk: -+ clk_put(utmi_clk); -+err_utmi_clk: -+ clk_put(hclk); -+ -+ return ret; -+} -+ -+static int ohci_avr32_remove(struct platform_device *pdev) -+{ -+ struct usb_hcd *hcd = platform_get_drvdata(pdev); -+ -+ platform_set_drvdata(pdev, NULL); -+ usb_remove_hcd(hcd); -+ iounmap(hcd->regs); -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+ usb_put_hcd(hcd); -+ clk_put(utmi_clk); -+ clk_put(ohci_clk); -+ clk_put(hclk); -+ -+ return 0; -+} -+ -+/* FIXME */ -+#define ohci_avr32_suspend NULL -+#define ohci_avr32_resume NULL -+ -+static struct platform_driver ohci_hcd_avr32_driver = { -+ .probe = ohci_avr32_probe, -+ .remove = ohci_avr32_remove, -+ .shutdown = usb_hcd_platform_shutdown, -+ .suspend = ohci_avr32_suspend, -+ .resume = ohci_avr32_resume, -+ .driver = { -+ .owner = THIS_MODULE, -+ .name = "ohci", -+ }, -+}; -+MODULE_ALIAS("platform:ohci"); -diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c -index 8bec02c..43bed29 100644 ---- a/drivers/usb/host/ohci-hcd.c -+++ b/drivers/usb/host/ohci-hcd.c -@@ -1045,6 +1045,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ohci_hcd_at91_driver - #endif - -+#ifdef CONFIG_AVR32 -+#include "ohci-avr32.c" -+#define PLATFORM_DRIVER ohci_hcd_avr32_driver -+#endif -+ - #ifdef CONFIG_ARCH_PNX4008 - #include "ohci-pnx4008.c" - #define PLATFORM_DRIVER usb_hcd_pnx4008_driver -diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h -index faf622e..d77ea5c 100644 ---- a/drivers/usb/host/ohci.h -+++ b/drivers/usb/host/ohci.h -@@ -654,8 +654,10 @@ static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x) - * some big-endian SOC implementations. Same thing happens with PSW access. - */ - --#ifdef CONFIG_PPC_MPC52xx -+#if defined(CONFIG_PPC_MPC52xx) - #define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO) -+#elif defined(CONFIG_AVR32) -+#define big_endian_frame_no_quirk(ohci) 1 - #else - #define big_endian_frame_no_quirk(ohci) 0 - #endif -diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig -index 70d135e..9f8e70b 100644 ---- a/drivers/video/Kconfig -+++ b/drivers/video/Kconfig -@@ -938,6 +938,15 @@ config FB_ATMEL - help - This enables support for the AT91/AT32 LCD Controller. - -+config FB_ATMEL_MPOP -+ tristate "AT32 MPOP support" -+ depends on FB && AVR32 && FB_ATMEL -+ select FB_CFB_FILLRECT -+ select FB_CFB_COPYAREA -+ select FB_CFB_IMAGEBLIT -+ help -+ This enables support for the AT32 MPOP module. -+ - config FB_INTSRAM - bool "Frame Buffer in internal SRAM" - depends on FB_ATMEL && ARCH_AT91SAM9261 -diff --git a/drivers/video/Makefile b/drivers/video/Makefile -index a6b5529..edc0656 100644 ---- a/drivers/video/Makefile -+++ b/drivers/video/Makefile -@@ -89,6 +89,7 @@ obj-$(CONFIG_FB_SA1100) += sa1100fb.o - obj-$(CONFIG_FB_HIT) += hitfb.o - obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o - obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o -+obj-$(CONFIG_FB_ATMEL_MPOP) += atmel_mpopfb.o - obj-$(CONFIG_FB_PVR2) += pvr2fb.o - obj-$(CONFIG_FB_VOODOO1) += sstfb.o - obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o -diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c -index 75dac57..993d79e 100644 ---- a/drivers/video/atmel_lcdfb.c -+++ b/drivers/video/atmel_lcdfb.c -@@ -178,7 +178,7 @@ static void init_contrast(struct atmel_lcdfb_info *sinfo) - static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = { - .type = FB_TYPE_PACKED_PIXELS, - .visual = FB_VISUAL_TRUECOLOR, -- .xpanstep = 0, -+ .xpanstep = 1, - .ypanstep = 1, - .ywrapstep = 0, - .accel = FB_ACCEL_NONE, -@@ -239,7 +239,7 @@ static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo) - } - - static void atmel_lcdfb_update_dma(struct fb_info *info, -- struct fb_var_screeninfo *var) -+ struct fb_var_screeninfo *var) - { - struct atmel_lcdfb_info *sinfo = info->par; - struct fb_fix_screeninfo *fix = &info->fix; -@@ -251,6 +251,8 @@ static void atmel_lcdfb_update_dma(struct fb_info *info, - dma_addr &= ~3UL; - - /* Set framebuffer DMA base address and pixel offset */ -+ dev_dbg(info->device, "%s:\n", __func__); -+ dev_dbg(info->device, " *setting dma addr: 0x%lx \n", dma_addr); - lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr); - - atmel_lcdfb_update_dma2d(sinfo, var); -@@ -482,6 +484,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info) - dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n", - info->var.xres, info->var.yres, - info->var.xres_virtual, info->var.yres_virtual); -+ dev_dbg(info->device, " * bpp: %u\n", info->var.bits_per_pixel); - - atmel_lcdfb_stop_nowait(sinfo); - -@@ -583,7 +586,12 @@ static int atmel_lcdfb_set_par(struct fb_info *info) - lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL); - /* Enable FIFO & DMA errors */ - lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI); -- -+ -+ /* !!!HACK for logging end of frame and underruns -+ when connected to MPOP. */ -+ if( info->var.bits_per_pixel == 32 ) -+ lcdc_writel(sinfo, ATMEL_LCDC_IER, 0x70); -+ - /* ...wait for DMA engine to become idle... */ - while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY) - msleep(10); -@@ -684,7 +692,7 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red, - } - - static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var, -- struct fb_info *info) -+ struct fb_info *info) - { - dev_dbg(info->device, "%s\n", __func__); - -@@ -816,7 +824,8 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) - info->fix = atmel_lcdfb_fix; - - /* Enable LCDC Clocks */ -- if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) { -+ if (cpu_is_at91sam9261() || cpu_is_at32ap7000() -+ || cpu_is_at32ap7200()) { - sinfo->bus_clk = clk_get(dev, "hck1"); - if (IS_ERR(sinfo->bus_clk)) { - ret = PTR_ERR(sinfo->bus_clk); -diff --git a/drivers/video/atmel_mpopfb.c b/drivers/video/atmel_mpopfb.c -new file mode 100644 -index 0000000..0a07f7b ---- /dev/null -+++ b/drivers/video/atmel_mpopfb.c -@@ -0,0 +1,1127 @@ -+/* -+ * Driver for AT91/AT32 LCD Controller -+ * -+ * Copyright (C) 2007 Atmel Corporation -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ */ -+ -+#define DEBUG -+ -+#include <linux/clk.h> -+#include <linux/delay.h> -+#include <linux/dma-mapping.h> -+#include <linux/fb.h> -+#include <linux/init.h> -+#include <linux/interrupt.h> -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <linux/uaccess.h> -+ -+#include <mach/board.h> -+#include <mach/cpu.h> -+ -+#include <video/atmel_lcdc.h> -+#include <video/atmel_mpop.h> -+ -+#define mpop_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg)) -+#define mpop_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg)) -+ -+#define ATMEL_MPOPFB_FBINFO_DEFAULT (FBINFO_DEFAULT \ -+ | FBINFO_PARTIAL_PAN_OK \ -+ | FBINFO_HWACCEL_XPAN \ -+ | FBINFO_HWACCEL_YPAN) -+ -+static struct atmel_mpopfb_rgbconv_coeffs atmel_mpop_ycrcb2rgb_coeffs = { -+ .r1 = 298, -+ .r2 = 0, -+ .r3 = 409, -+ .r4 = -56992, -+ .g1 = 298, -+ .g2 = -100, -+ .g3 = -208, -+ .g4 = 34784, -+ .b1 = 298, -+ .b2 = 516, -+ .b3 = 0, -+ .b4 = -70688, -+}; -+ -+static struct fb_fix_screeninfo atmel_mpopfb_fix __initdata = { -+ .type = FB_TYPE_PLANES, -+ .visual = FB_VISUAL_TRUECOLOR, -+ .xpanstep = 16, -+ .ypanstep = 1, -+ .ywrapstep = 1, -+ .accel = FB_ACCEL_NONE, -+}; -+ -+static void atmel_mpopfb_update_sar(struct fb_info *info, -+ struct fb_var_screeninfo *var) -+{ -+ struct atmel_mpopfb_info *sinfo = info->par; -+ struct fb_fix_screeninfo *fix = &info->fix; -+ u32 y_sar, u_sar, v_sar, o1_sar, o2_sar, cursor_sar, next_sar; -+ -+ u32 chroma_xres_virtual; -+ u32 chroma_yres_virtual; -+ u32 chroma_xres; -+ u32 chroma_yres; -+ u32 chroma_xoffset; -+ u32 chroma_yoffset; -+ -+ switch (var->bits_per_pixel) { -+ default: -+ case 12: -+ chroma_xres_virtual = var->xres_virtual / 2; -+ chroma_yres_virtual = var->yres_virtual / 2; -+ chroma_xres = var->xres / 2; -+ chroma_yres = var->yres / 2; -+ chroma_xoffset = var->xoffset / 2; -+ chroma_yoffset = var->yoffset / 2; -+ break; -+ case 16: -+ chroma_xres_virtual = var->xres_virtual / 2; -+ chroma_yres_virtual = var->yres_virtual; -+ chroma_xres = var->xres / 2; -+ chroma_yres = var->yres; -+ chroma_xoffset = var->xoffset / 2; -+ chroma_yoffset = var->yoffset; -+ break; -+ case 24: -+ chroma_xres_virtual = var->xres_virtual; -+ chroma_yres_virtual = var->yres_virtual; -+ chroma_xres = var->xres; -+ chroma_yres = var->yres; -+ chroma_xoffset = var->xoffset; -+ chroma_yoffset = var->yoffset; -+ break; -+ } -+ -+ /* Setup pointer to YUV planes in YUV framebuffer. */ -+ y_sar = fix->smem_start + var->xoffset -+ + var->yoffset * var->xres_virtual; -+ u_sar = fix->smem_start + var->xres_virtual * var->yres_virtual -+ + chroma_xoffset + chroma_yoffset * chroma_xres_virtual; -+ v_sar = u_sar + chroma_xres_virtual * chroma_yres_virtual; -+ next_sar = fix->smem_start + var->xres_virtual * var->yres_virtual -+ + 2 * chroma_xres_virtual * chroma_yres_virtual; -+ o1_sar = next_sar; -+ if (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].enabled) -+ next_sar += sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].xsize -+ * sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].ysize; -+ o2_sar = next_sar; -+ if (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].enabled) -+ next_sar += sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].xsize -+ * sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].ysize; -+ cursor_sar = next_sar; -+ -+ if (sinfo->baseimg_info.flip) { -+ /* If we flip we must start with the last line in the frame. */ -+ y_sar += var->xres_virtual * (var->yres - 1); -+ u_sar += chroma_xres_virtual * (chroma_yres - 1); -+ v_sar += chroma_xres_virtual * (chroma_yres - 1); -+ } -+ -+ dev_dbg(info->device, "%s:\n", __func__); -+ dev_dbg(info->device, " * y_sar = 0x%x\n", y_sar); -+ dev_dbg(info->device, " * u_sar = 0x%x\n", u_sar); -+ dev_dbg(info->device, " * v_sar = 0x%x\n", v_sar); -+ dev_dbg(info->device, " * o1_sar = 0x%x\n", o1_sar); -+ dev_dbg(info->device, " * o2_sar = 0x%x\n", o2_sar); -+ dev_dbg(info->device, " * cursor_sar = 0x%x\n", cursor_sar); -+ -+ mpop_writel(sinfo, ATMEL_MPOP_Y_SAR, y_sar); -+ mpop_writel(sinfo, ATMEL_MPOP_U_SAR, u_sar); -+ mpop_writel(sinfo, ATMEL_MPOP_V_SAR, v_sar); -+ mpop_writel(sinfo, ATMEL_MPOP_O1_SAR, o1_sar); -+ mpop_writel(sinfo, ATMEL_MPOP_O2_SAR, o2_sar); -+ mpop_writel(sinfo, ATMEL_MPOP_CURSOR_SAR, cursor_sar); -+} -+ -+static void atmel_mpopfb_free_video_memory(struct atmel_mpopfb_info *sinfo) -+{ -+ struct fb_info *info = sinfo->info; -+ -+ dma_free_writecombine(info->device, info->fix.smem_len, -+ (void __force *)info->screen_base, -+ info->fix.smem_start); -+} -+ -+/** -+ * atmel_mpopfb_alloc_video_memory - Allocate framebuffer memory -+ * @sinfo: the frame buffer to allocate memory for -+ */ -+static int atmel_mpopfb_alloc_video_memory(struct atmel_mpopfb_info *sinfo) -+{ -+ struct fb_info *info = sinfo->info; -+ struct fb_var_screeninfo *var = &info->var; -+ -+ info->fix.smem_len = (var->xres_virtual * var->yres_virtual -+ * ((var->bits_per_pixel + 7) / 8)); -+ -+ info->screen_base -+ = (void __iomem __force *)dma_alloc_writecombine(info->device, -+ info->fix.smem_len, -+ (dma_addr_t *)&info->fix.smem_start, -+ GFP_KERNEL); -+ -+ if (!info->screen_base) -+ return -ENOMEM; -+ -+ return 0; -+} -+ -+/** -+ * atmel_mpopfb_check_var - Validates a var passed in. -+ * @var: frame buffer variable screen structure -+ * @info: frame buffer structure that represents a single frame buffer -+ * -+ * Checks to see if the hardware supports the state requested by -+ * var passed in. This function does not alter the hardware -+ * state!!! This means the data stored in struct fb_info and -+ * struct atmel_mpopfb_info do not change. This includes the var -+ * inside of struct fb_info. Do NOT change these. This function -+ * can be called on its own if we intent to only test a mode and -+ * not actually set it. The stuff in modedb.c is a example of -+ * this. If the var passed in is slightly off by what the -+ * hardware can support then we alter the var PASSED in to what -+ * we can do. If the hardware doesn't support mode change a -+ * -EINVAL will be returned by the upper layers. You don't need -+ * to implement this function then. If you hardware doesn't -+ * support changing the resolution then this function is not -+ * needed. In this case the driver would just provide a var that -+ * represents the static state the screen is in. -+ * -+ * Returns negative errno on error, or zero on success. -+ */ -+static int atmel_mpopfb_check_var(struct fb_var_screeninfo *var, -+ struct fb_info *info) -+{ -+ struct device *dev = info->device; -+ struct atmel_mpopfb_info *sinfo = info->par; -+ struct fb_info *lcdc_info = platform_get_drvdata(sinfo->lcdc_pdev); -+ -+ dev_dbg(dev, "%s:\n", __func__); -+ dev_dbg(dev, " resolution: %ux%u\n", var->xres, var->yres); -+ dev_dbg(dev, " offset: (%u,%u)\n", var->xoffset, var->yoffset); -+ dev_dbg(dev, " bpp: %u\n", var->bits_per_pixel); -+ -+ /* -+ * FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal! -+ * as FB_VMODE_SMOOTH_XPAN is only used internally -+ */ -+ -+ if (var->vmode & FB_VMODE_CONUPDATE) { -+ var->vmode |= FB_VMODE_YWRAP; -+ var->xoffset = info->var.xoffset; -+ var->yoffset = info->var.yoffset; -+ } -+ -+ /* Horizontal size must be a multiple of 16 pixels */ -+ -+ /* -+ * Some very basic checks -+ */ -+ if (!var->xres) -+ var->xres = 1; -+ if (!var->yres) -+ var->yres = 1; -+ if (var->xres > var->xres_virtual) -+ var->xres_virtual = var->xres; -+ if (var->yres > var->yres_virtual) -+ var->yres_virtual = var->yres; -+ if (var->bits_per_pixel > 16) -+ var->bits_per_pixel = 24; -+ else if (var->bits_per_pixel > 12) -+ var->bits_per_pixel = 16; -+ else -+ var->bits_per_pixel = 12; -+ -+ /* Horizontal size and offset must be a multiple of 16 pixels */ -+ var->xres = (var->xres + 15) & ~15UL; -+ var->xres_virtual = (var->xres_virtual + 15) & ~15UL; -+ var->xoffset = (var->xoffset + 15) & ~15UL; -+ -+ if (var->xres_virtual < var->xoffset + var->xres) -+ var->xres_virtual = var->xoffset + var->xres; -+ if (var->yres_virtual < var->yoffset + var->yres) -+ var->yres_virtual = var->yoffset + var->yres; -+ -+ /* Check that the scaled image will fit into the LCD display. */ -+ if (sinfo->baseimg_info.xsize > lcdc_info->var.xres) { -+ dev_err(dev, "baseimage is wider than screen: %d > %d\n", -+ sinfo->baseimg_info.xsize, lcdc_info->var.xres); -+ return -EINVAL; -+ } -+ -+ if (sinfo->baseimg_info.ysize > lcdc_info->var.yres) { -+ dev_err(dev, "baseimage is higher than screen: %d > %d\n", -+ sinfo->baseimg_info.ysize, lcdc_info->var.yres); -+ return -EINVAL; -+ } -+ -+ /* Check that it is possible to scale to given size. */ -+ if (ATMEL_MPOP_CALC_SCALE(var->xres, sinfo->baseimg_info.xsize) == 0 -+ || (ATMEL_MPOP_CALC_SCALE(var->xres, -+ sinfo->baseimg_info.xsize) -+ > (4 << ATMEL_MPOP_RESIZE_FRAC_BITS))) { -+ dev_err(dev, "cannot scale from width %d to %d Max %s\n", -+ var->xres, sinfo->baseimg_info.xsize, -+ ATMEL_MPOP_CALC_SCALE(var->xres, -+ sinfo->baseimg_info.xsize) -+ ? "downscale factor is 4!" -+ : "upscale factor is 32"); -+ return -EINVAL; -+ } -+ -+ if (ATMEL_MPOP_CALC_SCALE(var->yres, sinfo->baseimg_info.ysize) == 0 -+ || (ATMEL_MPOP_CALC_SCALE(var->yres, -+ sinfo->baseimg_info.ysize) -+ > (4 << ATMEL_MPOP_RESIZE_FRAC_BITS))) { -+ dev_err(dev, "cannot scale from height %d to %d Max %s\n", -+ var->yres, sinfo->baseimg_info.ysize, -+ ATMEL_MPOP_CALC_SCALE(var->yres, -+ sinfo->baseimg_info.ysize) -+ ? "downscale factor is 4!" -+ : "upscale factor is 32"); -+ return -EINVAL; -+ } -+ -+ var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0; -+ var->transp.msb_right = 0; -+ var->transp.offset = var->transp.length = 0; -+ -+ switch (var->bits_per_pixel) { -+ case 12: -+ case 16: -+ case 24: -+ var->red.offset = 0; -+ var->green.offset = 8; -+ var->blue.offset = 16; -+ var->red.length = var->green.length = var->blue.length = 8; -+ break; -+ default: -+ dev_err(dev, "color depth %d not supported\n", -+ var->bits_per_pixel); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static void atmel_mpopfb_start(struct atmel_mpopfb_info *sinfo) -+{ -+ if (!sinfo->running) { -+ dev_dbg(sinfo->info->device, " * Starting MPOP.\n"); -+ -+ /* Enable all error interrupts. */ -+ mpop_writel(sinfo, ATMEL_MPOP_INTEN, 0x7); -+ -+ /* -+ * Enable the MPOP. When the LCD controller starts -+ * reading from the slave interface it will start -+ * generating a frame. -+ */ -+ mpop_writel(sinfo, ATMEL_MPOP_CR, -+ ATMEL_MPOP_CR_EN_MASK -+ /*| ATMEL_MPOP_CR_OUT_BGR_MASK */ ); -+ -+ sinfo->running = 1; -+ } -+} -+ -+static void atmel_mpopfb_stop(struct atmel_mpopfb_info *sinfo) -+{ -+ if (!sinfo->running) -+ /* Not running. Already stopped. */ -+ return; -+ -+ dev_dbg(sinfo->info->device, "Stopping MPOP.\n"); -+ -+ /* Disable the MPOP. This will force the MPOP to be reset. */ -+ mpop_writel(sinfo, ATMEL_MPOP_CR, 0); -+ -+ /* Disable all interrupts. */ -+ mpop_writel(sinfo, ATMEL_MPOP_INTDIS, ~0UL); -+ -+ /* Looks like we stopped the MPOP... */ -+ dev_dbg(sinfo->info->device, "MPOP stopped.\n"); -+ -+ sinfo->running = 0; -+} -+ -+static void atmel_mpopfb_connect_to_lcdc(struct atmel_mpopfb_info *sinfo) -+{ -+ struct fb_info *lcdc_info = platform_get_drvdata(sinfo->lcdc_pdev); -+ -+ dev_dbg(sinfo->info->device, "Connecting MPOP to LCDC:\n"); -+ -+ /* Start the mpop if it is not running. */ -+ atmel_mpopfb_start(sinfo); -+ -+ if (sinfo->connected_to_lcdc) -+ /* Already connected. */ -+ return; -+ -+ /* -+ * Set framebuffer pointer in LCDC to point to the slave -+ * interface of the MPOP. -+ */ -+ dev_dbg(sinfo->info->device, " * Attaching to LCDC.\n"); -+ sinfo->lcdc_old_smem_start = lcdc_info->fix.smem_start; -+ lcdc_info->fix.smem_start = (unsigned long)sinfo->slave_base; -+ sinfo->lcdc_old_bits_per_pixel = lcdc_info->var.bits_per_pixel; -+ lcdc_info->var.bits_per_pixel = 32; -+ -+ /* Force the LCDC to change the configuration. */ -+ lcdc_info->fbops->fb_set_par(lcdc_info); -+ -+ sinfo->connected_to_lcdc = 1; -+} -+ -+static void atmel_mpopfb_disconnect_from_lcdc(struct atmel_mpopfb_info *sinfo) -+{ -+ struct fb_info *lcdc_info = platform_get_drvdata(sinfo->lcdc_pdev); -+ -+ dev_dbg(sinfo->info->device, "Disconnecting MPOP from LCDC:\n"); -+ -+ if (!sinfo->connected_to_lcdc) -+ /* Already disconnected. */ -+ return; -+ -+ /* Restore lcdc's old framebuffer pointer and pixel-format. */ -+ lcdc_info->fix.smem_start = sinfo->lcdc_old_smem_start; -+ lcdc_info->var.bits_per_pixel = sinfo->lcdc_old_bits_per_pixel; -+ -+ /* Force the LCDC to change the configuration. */ -+ lcdc_info->fbops->fb_set_par(lcdc_info); -+ -+ sinfo->connected_to_lcdc = 0; -+ -+ /* We must stop the mpop to reset it. */ -+ atmel_mpopfb_stop(sinfo); -+} -+ -+static void atmel_mpopfb_put_overlay_palette(struct atmel_mpopfb_info *sinfo, -+ struct atmel_mpopfb_overlay_palette *palette) -+{ -+ int i; -+ -+ dev_dbg(sinfo->info->device, "Overlay palette = :\n"); -+ for (i = 0; i < 256; i++) { -+ dev_dbg(sinfo->info->device, "%d -> 0x%x\n", i, -+ *((int *)&palette->entry[i])); -+ mpop_writel(sinfo, ATMEL_MPOP_PALETTEDATA + 4 * i, -+ *((int *)&palette->entry[i])); -+ } -+} -+ -+static void atmel_mpopfb_get_overlay_palette(struct atmel_mpopfb_info *sinfo, -+ struct atmel_mpopfb_overlay_palette *palette) -+{ -+ int i; -+ -+ for (i = 0; i < 256; i++) -+ *((int *)&palette->entry[i]) = -+ mpop_readl(sinfo, ATMEL_MPOP_PALETTEDATA + 4 * i); -+} -+ -+static void atmel_mpopfb_put_cursor_palette(struct atmel_mpopfb_info *sinfo, -+ struct atmel_mpopfb_cursor_palette *palette) -+{ -+ int i; -+ for (i = 0; i < 4; i++) -+ mpop_writel(sinfo, ATMEL_MPOP_CURSOR_P0 + 4 * i, -+ *((int *)&palette->entry[i])); -+} -+ -+static void atmel_mpopfb_get_cursor_palette(struct atmel_mpopfb_info *sinfo, -+ struct atmel_mpopfb_cursor_palette *palette) -+{ -+ int i; -+ for (i = 0; i < 4; i++) -+ *((int *)&palette->entry[i]) -+ = mpop_readl(sinfo, ATMEL_MPOP_CURSOR_P0 + 4 * i); -+} -+ -+/** -+ * atmel_mpopfb_set_par - Alters the hardware state. -+ * @info: frame buffer structure that represents a single frame buffer -+ * -+ * Using the fb_var_screeninfo in fb_info we set the resolution -+ * of the this particular framebuffer. This function alters the -+ * par AND the fb_fix_screeninfo stored in fb_info. It doesn't -+ * not alter var in fb_info since we are using that data. This -+ * means we depend on the data in var inside fb_info to be -+ * supported by the hardware. atmel_lcdfb_check_var is always called -+ * before atmel_lcdfb_set_par to ensure this. Again if you can't -+ * change the resolution you don't need this function. -+ * -+ */ -+static int atmel_mpopfb_set_par(struct fb_info *info) -+{ -+ struct atmel_mpopfb_info *sinfo = info->par; -+ struct fb_info *lcdc_info = platform_get_drvdata(sinfo->lcdc_pdev); -+ struct fb_var_screeninfo *var = &info->var; -+ -+ u32 yuv_format; -+ u32 xscale, yscale; -+ -+ dev_dbg(info->device, "%s:\n", __func__); -+ dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n", -+ info->var.xres, info->var.yres, -+ info->var.xres_virtual, info->var.yres_virtual); -+ dev_dbg(info->device, " * offset: (%u,%u)\n", -+ info->var.xoffset, info->var.yoffset); -+ dev_dbg(info->device, " * bpp: %u\n", info->var.bits_per_pixel); -+ -+ /* Setup the output picture size. We must use the size of the lcdcfb. */ -+ dev_dbg(info->device, " * output frame resolution: %ux%u \n", -+ lcdc_info->var.xres, lcdc_info->var.yres); -+ mpop_writel(sinfo, ATMEL_MPOP_DISP_MAX_COORD, -+ ((lcdc_info->var.xres - 1) << ATMEL_MPOP_DISP_MAX_COORD_X_OFFSET) -+ | ((lcdc_info->var.yres - 1) << ATMEL_MPOP_DISP_MAX_COORD_Y_OFFSET)); -+ -+ /* Setup base picture. */ -+ -+ switch (var->bits_per_pixel) { -+ default: -+ case 12: -+ yuv_format = ATMEL_MPOP_YUVFORMAT_420; -+ break; -+ case 16: -+ yuv_format = ATMEL_MPOP_YUVFORMAT_422; -+ break; -+ case 24: -+ yuv_format = ATMEL_MPOP_YUVFORMAT_444; -+ break; -+ } -+ -+ xscale = ATMEL_MPOP_CALC_SCALE(info->var.xres, sinfo->baseimg_info.xsize); -+ yscale = ATMEL_MPOP_CALC_SCALE(info->var.yres, sinfo->baseimg_info.ysize); -+ -+ dev_dbg(info->device, " * baseimg output size = %ux%u \n", -+ sinfo->baseimg_info.xsize, sinfo->baseimg_info.ysize); -+ dev_dbg(info->device, " * resize scales = %ux%u \n", xscale, yscale); -+ dev_dbg(info->device, " * yuv format = %u \n", yuv_format); -+ mpop_writel(sinfo, ATMEL_MPOP_YCR, -+ yuv_format << ATMEL_MPOP_YCR_YUVFORMAT_OFFSET -+ | xscale << ATMEL_MPOP_YCR_XRESIZE_OFFSET -+ | yscale << ATMEL_MPOP_YCR_YRESIZE_OFFSET); -+ -+ /* Setup conversion coefficients. */ -+ mpop_writel(sinfo, ATMEL_MPOP_R2R1, -+ ((sinfo->rgbconv_coeffs.r1 << ATMEL_MPOP_R1_OFFSET) & ATMEL_MPOP_R1_MASK) -+ | ((sinfo->rgbconv_coeffs.r2 << ATMEL_MPOP_R2_OFFSET) & ATMEL_MPOP_R2_MASK)); -+ mpop_writel(sinfo, ATMEL_MPOP_R4R3, -+ ((sinfo->rgbconv_coeffs.r3 << ATMEL_MPOP_R3_OFFSET) & ATMEL_MPOP_R3_MASK) -+ | ((sinfo->rgbconv_coeffs.r4 << ATMEL_MPOP_R4_OFFSET) & ATMEL_MPOP_R4_MASK)); -+ mpop_writel(sinfo, ATMEL_MPOP_G2G1, -+ ((sinfo->rgbconv_coeffs.g1 << ATMEL_MPOP_G1_OFFSET) & ATMEL_MPOP_G1_MASK) -+ | ((sinfo->rgbconv_coeffs.g2 << ATMEL_MPOP_G2_OFFSET) & ATMEL_MPOP_G2_MASK)); -+ mpop_writel(sinfo, ATMEL_MPOP_G4G3, -+ ((sinfo->rgbconv_coeffs.g3 << ATMEL_MPOP_G3_OFFSET) & ATMEL_MPOP_G3_MASK) -+ | ((sinfo->rgbconv_coeffs.g4 << ATMEL_MPOP_G4_OFFSET) & ATMEL_MPOP_G4_MASK)); -+ mpop_writel(sinfo, ATMEL_MPOP_B2B1, -+ ((sinfo->rgbconv_coeffs.b1 << ATMEL_MPOP_B1_OFFSET) & ATMEL_MPOP_B1_MASK) -+ | ((sinfo->rgbconv_coeffs.b2 << ATMEL_MPOP_B2_OFFSET) & ATMEL_MPOP_B2_MASK)); -+ mpop_writel(sinfo, ATMEL_MPOP_B4B3, -+ ((sinfo->rgbconv_coeffs.b3 << ATMEL_MPOP_B3_OFFSET) & ATMEL_MPOP_B3_MASK) -+ | ((sinfo->rgbconv_coeffs.b4 << ATMEL_MPOP_B4_OFFSET) & ATMEL_MPOP_B4_MASK)); -+ -+ info->fix.line_length = info->var.xres_virtual; -+ info->fix.visual = FB_VISUAL_TRUECOLOR; -+ -+ /* Setup stride. We can flip the image by negating the -+ stride, but we must then set the SAR registers to point -+ to the last line in the image. */ -+ if (sinfo->baseimg_info.flip) { -+ dev_dbg(info->device, " * flip \n"); -+ mpop_writel(sinfo, ATMEL_MPOP_STRIDE, -info->var.xres_virtual); -+ } else -+ mpop_writel(sinfo, ATMEL_MPOP_STRIDE, info->var.xres_virtual); -+ -+ /* Setup input image size. */ -+ mpop_writel(sinfo, ATMEL_MPOP_YUV_MAX_COORD, -+ ((info->var.xres - 1) << ATMEL_MPOP_YUV_MAX_COORD_X_OFFSET) -+ | ((info->var.yres - 1) << ATMEL_MPOP_YUV_MAX_COORD_Y_OFFSET)); -+ -+ /* Setup size and position of output base image after scaling. */ -+ mpop_writel(sinfo, ATMEL_MPOP_RGB_SIZE, -+ sinfo->baseimg_info.xsize << ATMEL_MPOP_RGB_SIZE_X_OFFSET -+ | sinfo->baseimg_info.ysize << ATMEL_MPOP_RGB_SIZE_Y_OFFSET); -+ -+ mpop_writel(sinfo, ATMEL_MPOP_RGB_POS, -+ (sinfo->baseimg_info.xpos << ATMEL_MPOP_RGB_POS_X_OFFSET) -+ | (sinfo->baseimg_info.ypos << ATMEL_MPOP_RGB_POS_Y_OFFSET)); -+ -+ dev_dbg(info->device, " * baseimg pos: (%u,%u) \n", -+ sinfo->baseimg_info.xpos, sinfo->baseimg_info.ypos); -+ -+ /* Setup Word Transfer Count. */ -+ mpop_writel(sinfo, ATMEL_MPOP_RGB_WTC, -+ DIV_ROUND_UP(info->var.xres * info->var.yres -+ * var->bits_per_pixel, 32)); -+ -+ /* Set overlay parameters. */ -+ mpop_writel(sinfo, ATMEL_MPOP_O1_POS, -+ (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].xpos << ATMEL_MPOP_O1_POS_O1_POS_X) -+ | (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].ypos << ATMEL_MPOP_O1_POS_O1_POS_Y)); -+ mpop_writel(sinfo, ATMEL_MPOP_O1_SIZE, -+ (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].xsize << ATMEL_MPOP_O1_SIZE_O1_SIZE_X) -+ | (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].ysize << ATMEL_MPOP_O1_SIZE_O1_SIZE_Y)); -+ mpop_writel(sinfo, ATMEL_MPOP_O1_WTC, -+ DIV_ROUND_UP(sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].xsize -+ * sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].ysize, 4)); -+ -+ mpop_writel(sinfo, ATMEL_MPOP_O2_POS, -+ (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].xpos << ATMEL_MPOP_O2_POS_O2_POS_X) -+ | (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].ypos << ATMEL_MPOP_O2_POS_O2_POS_Y)); -+ mpop_writel(sinfo, ATMEL_MPOP_O2_SIZE, -+ (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].xsize << ATMEL_MPOP_O2_SIZE_O2_SIZE_X) -+ | (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].ysize << ATMEL_MPOP_O2_SIZE_O2_SIZE_Y)); -+ mpop_writel(sinfo, ATMEL_MPOP_O2_WTC, -+ DIV_ROUND_UP(sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].xsize * -+ sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].ysize, 4)); -+ -+ mpop_writel(sinfo, ATMEL_MPOP_CURSOR_POS, -+ (sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].xpos << ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X) -+ | (sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].ypos << ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y)); -+ mpop_writel(sinfo, ATMEL_MPOP_CURSOR_SIZE, -+ (sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].xsize << ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X) -+ | (sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].ysize << ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y)); -+ mpop_writel(sinfo, ATMEL_MPOP_CURSOR_WTC, -+ DIV_ROUND_UP(sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].xsize -+ * sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].ysize, 16)); -+ -+ /* Enable base overlay + any other enabled overlays. */ -+ mpop_writel(sinfo, ATMEL_MPOP_OCR, ATMEL_MPOP_OCR_RGBEN_MASK); -+ -+ if (sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].enabled) -+ mpop_writel(sinfo, ATMEL_MPOP_OCR, -+ mpop_readl(sinfo, ATMEL_MPOP_OCR) -+ | ATMEL_MPOP_OCR_CURSOREN_MASK); -+ if (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].enabled) -+ mpop_writel(sinfo, ATMEL_MPOP_OCR, -+ mpop_readl(sinfo, ATMEL_MPOP_OCR) -+ | ATMEL_MPOP_OCR_O1EN_MASK); -+ if (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].enabled) -+ mpop_writel(sinfo, ATMEL_MPOP_OCR, -+ mpop_readl(sinfo, ATMEL_MPOP_OCR) -+ | ATMEL_MPOP_OCR_O2EN_MASK); -+ -+ /* Set background to black. */ -+ mpop_writel(sinfo, ATMEL_MPOP_BGCOLOR, 0); -+ -+ /* Setup source address registers */ -+ atmel_mpopfb_update_sar(info, &info->var); -+ -+ dev_dbg(info->device, " * DONE\n"); -+ -+ return 0; -+} -+ -+static int atmel_mpopfb_pan_display(struct fb_var_screeninfo *var, -+ struct fb_info *info) -+{ -+ dev_dbg(info->device, "%s\n", __func__); -+ -+ /* Change source address registers to reflect the panning. */ -+ atmel_mpopfb_update_sar(info, var); -+ -+ return 0; -+} -+ -+static void atmel_mpopfb_put_overlay_info(struct fb_info *info, -+ struct atmel_mpopfb_overlay_info overlay_info) -+{ -+ struct atmel_mpopfb_info *sinfo = info->par; -+ -+ /* We can update the position now since it is double buffered. */ -+ switch (overlay_info.overlay) { -+ case ATMEL_MPOPFB_OVERLAY1: -+ mpop_writel(sinfo, ATMEL_MPOP_O1_POS, -+ (overlay_info.xpos << ATMEL_MPOP_O1_POS_O1_POS_X) -+ | (overlay_info.ypos << ATMEL_MPOP_O1_POS_O1_POS_Y)); -+ break; -+ case ATMEL_MPOPFB_OVERLAY2: -+ mpop_writel(sinfo, ATMEL_MPOP_O2_POS, -+ (overlay_info.xpos << ATMEL_MPOP_O2_POS_O2_POS_X) -+ | (overlay_info.ypos << ATMEL_MPOP_O2_POS_O2_POS_Y)); -+ break; -+ case ATMEL_MPOPFB_CURSOR: -+ mpop_writel(sinfo, ATMEL_MPOP_CURSOR_POS, -+ (overlay_info.xpos << ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X) -+ | (overlay_info.ypos << ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y)); -+ break; -+ default: -+ dev_warn(info->device, "Unknown overlay type: %d\n", -+ overlay_info.overlay); -+ return; -+ } -+ -+ /* Copy the overlay info to the mpopfb info structure. */ -+ sinfo->overlay_info[overlay_info.overlay] = overlay_info; -+} -+ -+static int atmel_mpopfb_ioctl(struct fb_info *info, -+ unsigned int cmd, unsigned long arg) -+{ -+ void __user *argp = (void __user *)arg; -+ struct atmel_mpopfb_info *sinfo = info->par; -+ struct atmel_mpopfb_overlay_info overlay_info; -+ -+ switch (cmd) { -+ case ATMEL_MPOP_FBIOPUT_OVERLAY_PALETTE:{ -+ struct atmel_mpopfb_overlay_palette palette; -+ if (copy_from_user(&palette, argp, sizeof(palette))) -+ return -EFAULT; -+ atmel_mpopfb_put_overlay_palette(sinfo, &palette); -+ return 0; -+ } -+ case ATMEL_MPOP_FBIOGET_OVERLAY_PALETTE:{ -+ struct atmel_mpopfb_overlay_palette palette; -+ atmel_mpopfb_get_overlay_palette(sinfo, &palette); -+ if (copy_to_user(argp, &palette, sizeof(palette))) -+ return -EFAULT; -+ return 0; -+ } -+ case ATMEL_MPOP_FBIOPUT_CURSOR_PALETTE:{ -+ struct atmel_mpopfb_cursor_palette palette; -+ if (copy_from_user(&palette, argp, sizeof(palette))) -+ return -EFAULT; -+ atmel_mpopfb_put_cursor_palette(sinfo, &palette); -+ return 0; -+ } -+ case ATMEL_MPOP_FBIOGET_CURSOR_PALETTE:{ -+ struct atmel_mpopfb_cursor_palette palette; -+ atmel_mpopfb_get_cursor_palette(sinfo, &palette); -+ if (copy_to_user(argp, &palette, sizeof(palette))) -+ return -EFAULT; -+ return 0; -+ } -+ case ATMEL_MPOP_FBIOPUT_OVERLAY_INFO: -+ if (copy_from_user(&overlay_info, argp, sizeof(overlay_info))) -+ return -EFAULT; -+ atmel_mpopfb_put_overlay_info(info, overlay_info); -+ return 0; -+ case ATMEL_MPOP_FBIOPUT_BASEIMG_INFO: -+ if (copy_from_user(&sinfo->baseimg_info, argp, -+ sizeof(sinfo->baseimg_info))) -+ return -EFAULT; -+ -+ /* Check that new baseimg parameters are sane. */ -+ if (atmel_mpopfb_check_var(&info->var, info)) -+ return -EFAULT; -+ -+ /* Update hardware configuration. */ -+ atmel_mpopfb_set_par(info); -+ return 0; -+ case ATMEL_MPOP_FBIOGET_BASEIMG_INFO: -+ return copy_to_user(argp, &sinfo->baseimg_info, -+ sizeof(sinfo->baseimg_info)) ? -EFAULT : 0; -+ case ATMEL_MPOP_FBIOPUT_RGBCONV_COEFFS: -+ if (copy_from_user(&sinfo->rgbconv_coeffs, argp, -+ sizeof(sinfo->rgbconv_coeffs))) -+ return -EFAULT; -+ -+ /* Update hardware configuration. */ -+ if (atmel_mpopfb_set_par(info)) -+ return -EFAULT; -+ -+ return 0; -+ case ATMEL_MPOP_FBIOGET_RGBCONV_COEFFS: -+ return copy_to_user(argp, &sinfo->rgbconv_coeffs, -+ sizeof(sinfo->rgbconv_coeffs)) ? -EFAULT : 0; -+ case ATMEL_MPOP_FBIO_CONNECT_TO_LCDC: -+ atmel_mpopfb_connect_to_lcdc(sinfo); -+ return 0; -+ case ATMEL_MPOP_FBIO_DISCONNECT_FROM_LCDC: -+ atmel_mpopfb_disconnect_from_lcdc(sinfo); -+ return 0; -+ default: -+ return -EINVAL; -+ } -+ -+ /* Force MPOP to be updated with any new parameters. */ -+ atmel_mpopfb_set_par(info); -+} -+ -+static int atmel_mpopfb_setcolreg(unsigned int regno, unsigned int red, -+ unsigned int green, unsigned int blue, -+ unsigned int transp, struct fb_info *info) -+{ -+ return 0; -+} -+ -+static struct fb_ops atmel_mpopfb_ops = { -+ .owner = THIS_MODULE, -+ .fb_check_var = atmel_mpopfb_check_var, -+ .fb_set_par = atmel_mpopfb_set_par, -+ .fb_setcolreg = atmel_mpopfb_setcolreg, -+ .fb_pan_display = atmel_mpopfb_pan_display, -+ .fb_imageblit = cfb_imageblit, -+ .fb_ioctl = atmel_mpopfb_ioctl, -+ .fb_fillrect = cfb_fillrect, -+ .fb_copyarea = cfb_copyarea, -+}; -+ -+static irqreturn_t atmel_mpopfb_interrupt(int irq, void *dev_id) -+{ -+ struct fb_info *info = dev_id; -+ struct atmel_mpopfb_info *sinfo = info->par; -+ u32 status; -+ -+ /* Check which interrupt we have. */ -+ status = mpop_readl(sinfo, ATMEL_MPOP_INTSTATUS); -+ -+ /* Clear interrupts. */ -+ mpop_writel(sinfo, ATMEL_MPOP_INTCLEAR, status); -+ -+ if (status & ATMEL_MPOP_EOP) { -+ /* End Of Picture. Start new picture. */ -+ mpop_writel(sinfo, ATMEL_MPOP_CR, -+ ATMEL_MPOP_CR_START_MASK -+ | mpop_readl(sinfo, ATMEL_MPOP_CR)); -+ } else if (status & ATMEL_MPOP_OUT) { -+ dev_err(info->dev, -+ "MPOP Output DMA interface Bus Error (address=0x%x)!\n", -+ mpop_readl(sinfo, ATMEL_MPOP_OUT_BEAR)); -+ } else if (status & ATMEL_MPOP_YUV) { -+ dev_err(info->dev, -+ "MPOP YUV Picture Fetch DMA interface Bus Error (address=0x%x)!\n", -+ mpop_readl(sinfo, ATMEL_MPOP_YUV_BEAR)); -+ } else if (status & ATMEL_MPOP_OVERLAY) { -+ dev_err(info->dev, -+ "MPOP Overlay Picture Fetch DMA interface Bus Error (address=0x%x)!\n", -+ mpop_readl(sinfo, ATMEL_MPOP_OVERLAY_BEAR)); -+ } -+ -+ dev_dbg(info->device, "%s\n", __func__); -+ dev_dbg(info->device, " * status: 0x%x \n", status); -+ -+ return IRQ_HANDLED; -+} -+ -+static int __init atmel_mpopfb_init_fbinfo(struct atmel_mpopfb_info *sinfo) -+{ -+ struct fb_info *info = sinfo->info; -+ int ret = 0; -+ -+ info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW; -+ -+ dev_info(info->device, -+ "%luKiB frame buffer at %08lx (mapped at %p)\n", -+ (unsigned long)info->fix.smem_len / 1024, -+ (unsigned long)info->fix.smem_start, info->screen_base); -+ -+ return ret; -+} -+ -+static void atmel_mpopfb_start_clock(struct atmel_mpopfb_info *sinfo) -+{ -+ clk_enable(sinfo->mpop_hclk); -+ clk_enable(sinfo->mpop_pclk); -+} -+ -+static void atmel_mpopfb_stop_clock(struct atmel_mpopfb_info *sinfo) -+{ -+ clk_disable(sinfo->mpop_hclk); -+ clk_disable(sinfo->mpop_pclk); -+} -+ -+static int __init atmel_mpopfb_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct fb_info *info; -+ struct fb_info *lcdc_info; -+ struct atmel_mpopfb_info *sinfo; -+ struct atmel_mpopfb_info *pdata_sinfo; -+ struct resource *regs = NULL; -+ struct resource *slave = NULL; -+ struct resource *map = NULL; -+ int ret; -+ -+ dev_dbg(dev, "%s BEGIN\n", __func__); -+ -+ ret = -ENOMEM; -+ info = framebuffer_alloc(sizeof(struct atmel_mpopfb_info), dev); -+ if (!info) { -+ dev_err(dev, "cannot allocate memory\n"); -+ goto out; -+ } -+ -+ sinfo = info->par; -+ -+ if (dev->platform_data) { -+ pdata_sinfo = dev->platform_data; -+ sinfo->lcdc_pdev = pdata_sinfo->lcdc_pdev; -+ if (!sinfo->lcdc_pdev) { -+ dev_err(dev, "cannot get hold of lcdcfb device\n"); -+ goto free_info; -+ } -+ } else { -+ dev_err(dev, "cannot get default configuration\n"); -+ goto free_info; -+ } -+ -+ sinfo->info = info; -+ sinfo->pdev = pdev; -+ sinfo->running = 0; -+ sinfo->connected_to_lcdc = 0; -+ sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].enabled = 0; -+ sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].enabled = 0; -+ sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].enabled = 0; -+ -+ /* Setup default info */ -+ -+ /* Set fb_var_screeninfo equal to that of the lcdcfb driver. */ -+ lcdc_info = (struct fb_info *)platform_get_drvdata(sinfo->lcdc_pdev); -+ memcpy(&info->var, &lcdc_info->var, sizeof(struct fb_var_screeninfo)); -+ -+ /* Set default position of the image on the screen to (0,0) and -+ no scaling */ -+ sinfo->baseimg_info.xpos = 0; -+ sinfo->baseimg_info.ypos = 0; -+ sinfo->baseimg_info.xsize = info->var.xres; -+ sinfo->baseimg_info.ysize = info->var.yres; -+ -+ /* Use YCbCr --> RGB converion per default. */ -+ memcpy(&sinfo->rgbconv_coeffs, &atmel_mpop_ycrcb2rgb_coeffs, -+ sizeof(struct atmel_mpopfb_rgbconv_coeffs)); -+ -+ strcpy(info->fix.id, sinfo->pdev->name); -+ info->flags = ATMEL_MPOPFB_FBINFO_DEFAULT; -+ info->fbops = &atmel_mpopfb_ops; -+ -+ //memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs)); -+ info->fix = atmel_mpopfb_fix; -+ -+ /* Enable MPOP Clocks */ -+ sinfo->mpop_hclk = clk_get(dev, "hclk"); -+ sinfo->mpop_pclk = clk_get(dev, "pclk"); -+ if (IS_ERR(sinfo->mpop_hclk)) { -+ ret = PTR_ERR(sinfo->mpop_hclk); -+ goto put_bus_clk; -+ } -+ if (IS_ERR(sinfo->mpop_pclk)) { -+ ret = PTR_ERR(sinfo->mpop_pclk); -+ goto stop_clk; -+ } -+ atmel_mpopfb_start_clock(sinfo); -+ -+ //ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb, -+ // info->monspecs.modedb_len, info->monspecs.modedb, -+ // sinfo->default_bpp); -+ //if (!ret) { -+ // dev_err(dev, "no suitable video mode found\n"); -+ // goto stop_clk; -+ //} -+ -+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!regs) { -+ dev_err(dev, "resources unusable\n"); -+ ret = -ENXIO; -+ goto stop_clk; -+ } -+ -+ slave = platform_get_resource(pdev, IORESOURCE_MEM, 1); -+ if (!slave) { -+ dev_err(dev, "slave interface memory resource unusable\n"); -+ ret = -ENXIO; -+ goto stop_clk; -+ } -+ sinfo->slave_base = (void *)slave->start; -+ -+ sinfo->irq_base = platform_get_irq(pdev, 0); -+ if (sinfo->irq_base < 0) { -+ dev_err(dev, "unable to get irq\n"); -+ ret = sinfo->irq_base; -+ goto stop_clk; -+ } -+ -+ /* Initialize video memory */ -+ map = platform_get_resource(pdev, IORESOURCE_MEM, 2); -+ if (map) { -+ /* use a pre-allocated memory buffer */ -+ info->fix.smem_start = map->start; -+ info->fix.smem_len = map->end - map->start + 1; -+ if (!request_mem_region(info->fix.smem_start, -+ info->fix.smem_len, pdev->name)) { -+ //ret = -EBUSY; -+ //goto stop_clk; -+ /* Probably in use by LCD controller. */ -+ info->screen_base = lcdc_info->screen_base; -+ } else { -+ info->screen_base = -+ ioremap(info->fix.smem_start, info->fix.smem_len); -+ if (!info->screen_base) -+ goto release_intmem; -+ } -+ } else { -+ /* alocate memory buffer */ -+ ret = atmel_mpopfb_alloc_video_memory(sinfo); -+ if (ret < 0) { -+ dev_err(dev, "cannot allocate mpop framebuffer: %d\n", -+ ret); -+ goto stop_clk; -+ } -+ } -+ -+ /* MPOP registers */ -+ info->fix.mmio_start = regs->start; -+ info->fix.mmio_len = regs->end - regs->start + 1; -+ -+ if (!request_mem_region(info->fix.mmio_start, -+ info->fix.mmio_len, pdev->name)) { -+ ret = -EBUSY; -+ goto free_fb; -+ } -+ -+ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len); -+ if (!sinfo->mmio) { -+ dev_err(dev, "cannot map MPOP registers\n"); -+ goto release_mem; -+ } -+ -+ /* MPOP slave interface */ -+ if (!request_mem_region(slave->start, -+ slave->end - slave->start + 1, pdev->name)) { -+ dev_err(dev, -+ "error requesting memory region for MPOP slave interface\n"); -+ ret = -EBUSY; -+ goto unmap_mmio; -+ } -+ -+ /* interrupt */ -+ ret = -+ request_irq(sinfo->irq_base, atmel_mpopfb_interrupt, 0, pdev->name, -+ info); -+ if (ret) { -+ dev_err(dev, "request_irq failed: %d\n", ret); -+ goto release_mem_slave; -+ } -+ -+ ret = atmel_mpopfb_init_fbinfo(sinfo); -+ if (ret < 0) { -+ dev_err(dev, "init fbinfo failed: %d\n", ret); -+ goto unregister_irqs; -+ } -+ -+ /* -+ * This makes sure that our colour bitfield -+ * descriptors are correctly initialised. -+ */ -+ atmel_mpopfb_check_var(&info->var, info); -+ -+ ret = fb_set_var(info, &info->var); -+ if (ret) { -+ dev_warn(dev, "unable to set display parameters\n"); -+ goto free_cmap; -+ } -+ -+ dev_set_drvdata(dev, info); -+ -+ /* -+ * Tell the world that we're ready to go -+ */ -+ ret = register_framebuffer(info); -+ if (ret < 0) { -+ dev_err(dev, "failed to register framebuffer device: %d\n", -+ ret); -+ goto free_cmap; -+ } -+ -+ dev_info(dev, "fb%d: Atmel MPOP at 0x%08lx (mapped at %p), irq %lu\n", -+ info->node, info->fix.mmio_start, sinfo->mmio, -+ sinfo->irq_base); -+ -+ return 0; -+ -+free_cmap: -+ fb_dealloc_cmap(&info->cmap); -+unregister_irqs: -+ free_irq(sinfo->irq_base, info); -+release_mem_slave: -+ release_mem_region(slave->start, slave->end - slave->start + 1); -+unmap_mmio: -+ iounmap(sinfo->mmio); -+release_mem: -+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len); -+free_fb: -+ if (map) -+ iounmap(info->screen_base); -+ else -+ atmel_mpopfb_free_video_memory(sinfo); -+ -+release_intmem: -+ if (map) -+ release_mem_region(info->fix.smem_start, info->fix.smem_len); -+stop_clk: -+ atmel_mpopfb_stop_clock(sinfo); -+ clk_put(sinfo->mpop_hclk); -+put_bus_clk: -+ if (sinfo->mpop_pclk) -+ clk_put(sinfo->mpop_pclk); -+free_info: -+ framebuffer_release(info); -+out: -+ dev_dbg(dev, "%s FAILED\n", __func__); -+ return ret; -+} -+ -+static int __exit atmel_mpopfb_remove(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct fb_info *info = dev_get_drvdata(dev); -+ struct atmel_mpopfb_info *sinfo = info->par; -+ -+ if (!sinfo) -+ return 0; -+ -+ unregister_framebuffer(info); -+ atmel_mpopfb_stop_clock(sinfo); -+ clk_put(sinfo->mpop_hclk); -+ clk_put(sinfo->mpop_pclk); -+ fb_dealloc_cmap(&info->cmap); -+ free_irq(sinfo->irq_base, info); -+ iounmap(sinfo->mmio); -+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len); -+ if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) { -+ iounmap(info->screen_base); -+ release_mem_region(info->fix.smem_start, info->fix.smem_len); -+ } else { -+ atmel_mpopfb_free_video_memory(sinfo); -+ } -+ -+ dev_set_drvdata(dev, NULL); -+ framebuffer_release(info); -+ -+ return 0; -+} -+ -+static struct platform_driver atmel_mpopfb_driver = { -+ .remove = __exit_p(atmel_mpopfb_remove), -+ .driver.name = "atmel_mpopfb", -+ .driver.owner = THIS_MODULE, -+}; -+ -+static int __init atmel_mpopfb_init(void) -+{ -+ return platform_driver_probe(&atmel_mpopfb_driver, atmel_mpopfb_probe); -+} -+ -+static void __exit atmel_mpopfb_exit(void) -+{ -+ platform_driver_unregister(&atmel_mpopfb_driver); -+} -+ -+module_init(atmel_mpopfb_init); -+module_exit(atmel_mpopfb_exit); -+ -+MODULE_DESCRIPTION("AT32 MPOP framebuffer driver"); -+MODULE_AUTHOR("Ronny Pedersen <rpedersen@atmel.com>"); -+MODULE_LICENSE("GPL"); -diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig -index c510367..55a3a34 100644 ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -221,12 +221,12 @@ config DAVINCI_WATCHDOG - - # AVR32 Architecture - --config AT32AP700X_WDT -- tristate "AT32AP700x watchdog" -- depends on CPU_AT32AP700X -+config AT32_WDT -+ tristate "AVR32 On-Chip Watchdog Timer" -+ depends on AVR32 - help -- Watchdog timer embedded into AT32AP700x devices. This will reboot -- your system when the timeout is reached. -+ Watchdog timer embedded into AT32AP700x and similar devices. -+ This will reboot your system when the timeout is reached. - - # BLACKFIN Architecture - -diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile -index e0ef123..7db92cd 100644 ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -43,7 +43,7 @@ obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o - # ARM26 Architecture - - # AVR32 Architecture --obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o -+obj-$(CONFIG_AT32_WDT) += at32_wdt.o - - # BLACKFIN Architecture - obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o -diff --git a/drivers/watchdog/at32_wdt.c b/drivers/watchdog/at32_wdt.c -new file mode 100644 -index 0000000..bbdb997 ---- /dev/null -+++ b/drivers/watchdog/at32_wdt.c -@@ -0,0 +1,620 @@ -+/* -+ * Watchdog driver for Atmel AVR32 devices -+ * -+ * Copyright (C) 2005-2008 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * -+ * AT32AP700x Errata: WDT Clear is blocked after WDT Reset -+ * -+ * A watchdog timer event will, after reset, block writes to the WDT_CLEAR -+ * register, preventing the program to clear the next Watchdog Timer Reset. -+ * -+ * If you still want to use the WDT after a WDT reset a small code can be -+ * insterted at the startup checking the AVR32_PM.rcause register for WDT reset -+ * and use a GPIO pin to reset the system. This method requires that one of the -+ * GPIO pins are available and connected externally to the RESET_N pin. After -+ * the GPIO pin has pulled down the reset line the GPIO will be reset and leave -+ * the pin tristated with pullup. -+ */ -+ -+#include <linux/clk.h> -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/moduleparam.h> -+#include <linux/miscdevice.h> -+#include <linux/fs.h> -+#include <linux/platform_device.h> -+#include <linux/watchdog.h> -+#include <linux/uaccess.h> -+#include <linux/io.h> -+#include <linux/log2.h> -+#include <linux/spinlock.h> -+ -+#include <mach/cpu.h> -+#include <mach/pm.h> -+ -+/* -+ * AT32AP700x uses a 16-bit prescaler. This limits the timeout range -+ * somewhat. Later chips use a 32-bit prescaler. -+ */ -+#define TIMEOUT_MIN 1 -+#ifdef CONFIG_CPU_AT32AP700X -+# define TIMEOUT_MAX 2 -+# define TIMEOUT_DEFAULT TIMEOUT_MAX -+#else -+# define TIMEOUT_MAX 131072 -+# define TIMEOUT_DEFAULT 64 -+#endif -+ -+/* module parameters */ -+static int timeout = TIMEOUT_DEFAULT; -+module_param(timeout, int, 0); -+MODULE_PARM_DESC(timeout, -+ "Timeout value. Any power of two between 1 and " -+ __MODULE_STRING(TIMEOUT_MAX) " seconds. (default=" -+ __MODULE_STRING(TIMEOUT_DEFAULT) ")"); -+ -+static int nowayout = WATCHDOG_NOWAYOUT; -+module_param(nowayout, int, 0); -+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" -+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -+ -+/* Watchdog registers and write/read macro */ -+#define WDT_CTRL 0x00 -+#define WDT_CTRL_EN 0 -+#define WDT_CTRL_PSEL 8 -+#define WDT_CTRL_CEN 16 -+#define WDT_CTRL_CSEL 17 -+#define WDT_CTRL_KEY 24 -+ -+#define WDT_CLR 0x04 -+ -+#define WDT_BIT(name) (1 << WDT_##name) -+#define WDT_BF(name, value) ((value) << WDT_##name) -+ -+#define wdt_readl(dev, reg) \ -+ __raw_readl((dev)->regs + WDT_##reg) -+#define wdt_writel(dev, reg, value) \ -+ __raw_writel((value), (dev)->regs + WDT_##reg) -+ -+struct wdt_at32 { -+ void __iomem *regs; -+ struct clk *pclk; -+ struct clk *src_clk; -+ spinlock_t io_lock; -+ int timeout; -+ int boot_status; -+ unsigned long users; -+ struct miscdevice miscdev; -+}; -+ -+static struct wdt_at32 *wdt; -+static char expect_release; -+ -+static inline void wdt_clk_enable(struct wdt_at32 *w) -+{ -+ if (!cpu_is_at32ap7000()) -+ clk_enable(w->pclk); -+} -+ -+static inline void wdt_clk_disable(struct wdt_at32 *w) -+{ -+ if (!cpu_is_at32ap7000()) -+ clk_disable(w->pclk); -+} -+ -+static inline int at32_wdt_version(void) -+{ -+ if (cpu_is_at32ap7000()) -+ return 1; -+ if (cpu_is_at32ap7200()) -+ return 3; -+ -+ BUG(); -+} -+ -+static unsigned long at32_wdt_calc_psel(int timeout) -+{ -+ if (at32_wdt_version() == 1) -+ /* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */ -+ return (timeout > 1) ? 0xf : 0xe; -+ -+ return order_base_2(timeout) + 14; -+} -+ -+/* -+ * Disable the watchdog. -+ */ -+static inline void at32_wdt_stop(void) -+{ -+ unsigned long ctrl; -+ unsigned long ctrl_mask = 0; -+ -+ switch (at32_wdt_version()) { -+ case 3: -+ ctrl_mask |= (1 << WDT_CTRL_CEN) | (1 << WDT_CTRL_CSEL); -+ /* fall through */ -+ case 2: -+ ctrl_mask |= 0x1f << WDT_CTRL_PSEL; -+ break; -+ case 1: -+ ctrl_mask |= 0x0f << WDT_CTRL_PSEL; -+ break; -+ } -+ -+ wdt_clk_enable(wdt); -+ spin_lock(&wdt->io_lock); -+ ctrl = wdt_readl(wdt, CTRL); -+ ctrl &= ctrl_mask; -+ wdt_writel(wdt, CTRL, ctrl | WDT_BF(CTRL_KEY, 0x55)); -+ wdt_writel(wdt, CTRL, ctrl | WDT_BF(CTRL_KEY, 0xaa)); -+ spin_unlock(&wdt->io_lock); -+ wdt_clk_disable(wdt); -+} -+ -+/* -+ * Enable and reset the watchdog. -+ */ -+static inline void at32_wdt_start(void) -+{ -+ unsigned long psel; -+ unsigned long ctrl; -+ -+ psel = at32_wdt_calc_psel(wdt->timeout); -+ ctrl = WDT_BIT(CTRL_EN) | WDT_BF(CTRL_PSEL, psel); -+ -+ if (at32_wdt_version() >= 3) -+ ctrl |= wdt_readl(wdt, CTRL) -+ & (WDT_BIT(CTRL_CSEL) | WDT_BIT(CTRL_CEN)); -+ -+ wdt_clk_enable(wdt); -+ spin_lock(&wdt->io_lock); -+ wdt_writel(wdt, CTRL, ctrl | WDT_BF(CTRL_KEY, 0x55)); -+ wdt_writel(wdt, CTRL, ctrl | WDT_BF(CTRL_KEY, 0xaa)); -+ spin_unlock(&wdt->io_lock); -+ wdt_clk_disable(wdt); -+} -+ -+/* -+ * Pat the watchdog timer. -+ */ -+static inline void at32_wdt_pat(void) -+{ -+ wdt_clk_enable(wdt); -+ spin_lock(&wdt->io_lock); -+ wdt_writel(wdt, CLR, 0x42); -+ spin_unlock(&wdt->io_lock); -+ wdt_clk_disable(wdt); -+} -+ -+/* -+ * Watchdog device is opened, and watchdog starts running. -+ */ -+static int at32_wdt_open(struct inode *inode, struct file *file) -+{ -+ if (test_and_set_bit(1, &wdt->users)) -+ return -EBUSY; -+ -+ at32_wdt_start(); -+ return nonseekable_open(inode, file); -+} -+ -+/* -+ * Close the watchdog device. -+ */ -+static int at32_wdt_close(struct inode *inode, struct file *file) -+{ -+ if (expect_release == 42) { -+ at32_wdt_stop(); -+ } else { -+ dev_dbg(wdt->miscdev.parent, -+ "unexpected close, not stopping watchdog!\n"); -+ at32_wdt_pat(); -+ } -+ clear_bit(1, &wdt->users); -+ expect_release = 0; -+ return 0; -+} -+ -+/* -+ * Change the watchdog time interval. -+ */ -+static int at32_wdt_settimeout(int time) -+{ -+ /* -+ * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max -+ * prescaler is 2 ^ 16 (or 2 ^ 32) allowing up to TIMEOUT_MAX -+ * seconds timeout. -+ */ -+ if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX) -+ || !is_power_of_2(time)) -+ return -EINVAL; -+ -+ /* -+ * Set new watchdog time. It will be used when at32_wdt_start() is -+ * called. -+ */ -+ wdt->timeout = time; -+ return 0; -+} -+ -+/* -+ * Get the watchdog status. -+ */ -+static int at32_wdt_get_status(void) -+{ -+ int rcause; -+ int status = 0; -+ -+ rcause = at32_get_reset_cause(); -+ -+ switch (rcause) { -+ case AT32_RCAUSE_BOD: -+ status = WDIOF_POWERUNDER; -+ break; -+ case AT32_RCAUSE_EXT: -+ status = WDIOF_EXTERN1; -+ break; -+ case AT32_RCAUSE_JTAG: -+ case AT32_RCAUSE_JTAGHARD: -+ case AT32_RCAUSE_OCDRST: -+ status = WDIOF_EXTERN2; -+ break; -+ case AT32_RCAUSE_WDT: -+ status = WDIOF_CARDRESET; -+ break; -+ case AT32_RCAUSE_POR: -+ case AT32_RCAUSE_NTAE: -+ case AT32_RCAUSE_SLEEP: -+ case AT32_RCAUSE_CPUERR: -+ default: -+ break; -+ } -+ -+ return status; -+} -+ -+static struct watchdog_info at32_wdt_info = { -+ .identity = "at32 watchdog", -+ .options = WDIOF_SETTIMEOUT | -+ WDIOF_KEEPALIVEPING | -+ WDIOF_MAGICCLOSE, -+}; -+ -+/* -+ * Handle commands from user-space. -+ */ -+static long at32_wdt_ioctl(struct file *file, -+ unsigned int cmd, unsigned long arg) -+{ -+ int ret = -ENOTTY; -+ int time; -+ void __user *argp = (void __user *)arg; -+ int __user *p = argp; -+ -+ switch (cmd) { -+ case WDIOC_GETSUPPORT: -+ ret = copy_to_user(argp, &at32_wdt_info, -+ sizeof(at32_wdt_info)) ? -EFAULT : 0; -+ break; -+ case WDIOC_GETSTATUS: -+ ret = put_user(0, p); -+ break; -+ case WDIOC_GETBOOTSTATUS: -+ ret = put_user(wdt->boot_status, p); -+ break; -+ case WDIOC_SETOPTIONS: -+ ret = get_user(time, p); -+ if (ret) -+ break; -+ if (time & WDIOS_DISABLECARD) -+ at32_wdt_stop(); -+ if (time & WDIOS_ENABLECARD) -+ at32_wdt_start(); -+ ret = 0; -+ break; -+ case WDIOC_KEEPALIVE: -+ at32_wdt_pat(); -+ ret = 0; -+ break; -+ case WDIOC_SETTIMEOUT: -+ ret = get_user(time, p); -+ if (ret) -+ break; -+ ret = at32_wdt_settimeout(time); -+ if (ret) -+ break; -+ /* Enable new time value */ -+ at32_wdt_start(); -+ /* fall through */ -+ case WDIOC_GETTIMEOUT: -+ ret = put_user(wdt->timeout, p); -+ break; -+ } -+ -+ return ret; -+} -+ -+static ssize_t at32_wdt_write(struct file *file, const char __user *data, -+ size_t len, loff_t *ppos) -+{ -+ /* See if we got the magic character 'V' and reload the timer */ -+ if (len) { -+ if (!nowayout) { -+ size_t i; -+ -+ /* -+ * note: just in case someone wrote the magic -+ * character five months ago... -+ */ -+ expect_release = 0; -+ -+ /* -+ * scan to see whether or not we got the magic -+ * character -+ */ -+ for (i = 0; i != len; i++) { -+ char c; -+ if (get_user(c, data + i)) -+ return -EFAULT; -+ if (c == 'V') -+ expect_release = 42; -+ } -+ } -+ /* someone wrote to us, we should pat the watchdog */ -+ at32_wdt_pat(); -+ } -+ return len; -+} -+ -+static const struct file_operations at32_wdt_fops = { -+ .owner = THIS_MODULE, -+ .llseek = no_llseek, -+ .unlocked_ioctl = at32_wdt_ioctl, -+ .open = at32_wdt_open, -+ .release = at32_wdt_close, -+ .write = at32_wdt_write, -+}; -+ -+static int __init at32_wdt_enable_source_clock(struct platform_device *pdev) -+{ -+ struct clk *clk; -+ unsigned int csel; -+ u32 ctrl; -+ -+ /* Only v3+ have selectable source clock */ -+ if (at32_wdt_version() < 3) -+ return 0; -+ -+ csel = 1; -+ -+ /* -+ * Prefer the much more accurate crystal oscillator in favor -+ * of the RC oscillator. -+ */ -+ clk = clk_get(NULL, "osc32"); -+ if (IS_ERR(clk)) { -+ csel = 0; -+ clk = clk_get(NULL, "rcosc"); -+ } -+ if (IS_ERR(clk)) { -+ dev_dbg(&pdev->dev, "No source clock\n"); -+ return -ENXIO; -+ } -+ -+ clk_enable(clk); -+ -+ dev_info(&pdev->dev, "Using 32 kHz %s oscillator\n", -+ csel ? "crystal" : "RC"); -+ -+ wdt_clk_enable(wdt); -+ ctrl = (csel << WDT_CTRL_CSEL) | (1 << WDT_CTRL_CEN); -+ -+ /* -+ * Make sure the WDT is disabled, and disable any clocks that -+ * may have been selected earlier. -+ */ -+ wdt_writel(wdt, CTRL, 0x55 << WDT_CTRL_KEY); -+ wdt_writel(wdt, CTRL, 0xaa << WDT_CTRL_KEY); -+ -+ /* Wait for the clock to become properly deselected */ -+ while (wdt_readl(wdt, CTRL) & (1 << WDT_CTRL_CEN)) -+ cpu_relax(); -+ -+ /* Select the new clock */ -+ wdt_writel(wdt, CTRL, ctrl | (0x55 << WDT_CTRL_KEY)); -+ wdt_writel(wdt, CTRL, ctrl | (0xaa << WDT_CTRL_KEY)); -+ -+ /* Wait for the new clock to become usable */ -+ while (!(wdt_readl(wdt, CTRL) & (1 << WDT_CTRL_CEN))) -+ cpu_relax(); -+ -+ wdt_clk_disable(wdt); -+ return 0; -+} -+ -+static void at32_wdt_disable_source_clock(void) -+{ -+ wdt_clk_enable(wdt); -+ -+ wdt_writel(wdt, CTRL, 0x55 << WDT_CTRL_KEY); -+ wdt_writel(wdt, CTRL, 0xaa << WDT_CTRL_KEY); -+ -+ /* Wait for the clock to become properly deselected */ -+ while (wdt_readl(wdt, CTRL) & (1 << WDT_CTRL_CEN)) -+ cpu_relax(); -+ -+ wdt_clk_disable(wdt); -+} -+ -+static int __init at32_wdt_probe(struct platform_device *pdev) -+{ -+ struct resource *regs; -+ int ret; -+ -+ if (wdt) { -+ dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n"); -+ return -EBUSY; -+ } -+ -+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!regs) { -+ dev_dbg(&pdev->dev, "missing mmio resource\n"); -+ return -ENXIO; -+ } -+ -+ wdt = kzalloc(sizeof(struct wdt_at32), GFP_KERNEL); -+ if (!wdt) { -+ dev_dbg(&pdev->dev, "no memory for wdt structure\n"); -+ return -ENOMEM; -+ } -+ -+ wdt->regs = ioremap(regs->start, regs->end - regs->start + 1); -+ if (!wdt->regs) { -+ ret = -ENOMEM; -+ dev_dbg(&pdev->dev, "could not map I/O memory\n"); -+ goto err_free; -+ } -+ -+ if (!cpu_is_at32ap7000()) { -+ wdt->pclk = clk_get(&pdev->dev, "pclk"); -+ if (IS_ERR(wdt->pclk)) { -+ dev_dbg(&pdev->dev, "no peripheral clock\n"); -+ ret = -ENXIO; -+ goto err_iounmap; -+ } -+ } -+ -+ ret = at32_wdt_enable_source_clock(pdev); -+ if (ret) -+ goto err_put_clk; -+ -+ spin_lock_init(&wdt->io_lock); -+ wdt->boot_status = at32_wdt_get_status(); -+ -+ /* Work-around for watchdog silicon errata. */ -+ if (cpu_is_at32ap7000() -+ && (wdt->boot_status & WDIOF_CARDRESET)) { -+ dev_info(&pdev->dev, "CPU must be reset with external " -+ "reset or POR due to silicon errata.\n"); -+ ret = -EIO; -+ goto err_disable_source_clock; -+ } else { -+ wdt->users = 0; -+ } -+ wdt->miscdev.minor = WATCHDOG_MINOR; -+ wdt->miscdev.name = "watchdog"; -+ wdt->miscdev.fops = &at32_wdt_fops; -+ -+ if (at32_wdt_settimeout(timeout)) { -+ at32_wdt_settimeout(TIMEOUT_DEFAULT); -+ dev_dbg(&pdev->dev, -+ "default timeout invalid, set to %d sec.\n", -+ TIMEOUT_DEFAULT); -+ } -+ -+ ret = misc_register(&wdt->miscdev); -+ if (ret) { -+ dev_dbg(&pdev->dev, "failed to register wdt miscdev\n"); -+ goto err_iounmap; -+ } -+ -+ platform_set_drvdata(pdev, wdt); -+ wdt->miscdev.parent = &pdev->dev; -+ dev_info(&pdev->dev, -+ "AT32 WDT at 0x%p, timeout %d sec (nowayout=%d)\n", -+ wdt->regs, wdt->timeout, nowayout); -+ -+ return 0; -+ -+err_disable_source_clock: -+ at32_wdt_disable_source_clock(); -+err_put_clk: -+ if (!cpu_is_at32ap7000()) -+ clk_put(wdt->pclk); -+err_iounmap: -+ iounmap(wdt->regs); -+err_free: -+ kfree(wdt); -+ wdt = NULL; -+ return ret; -+} -+ -+static int __exit at32_wdt_remove(struct platform_device *pdev) -+{ -+ if (wdt && platform_get_drvdata(pdev) == wdt) { -+ /* Stop the timer before we leave */ -+ if (!nowayout) { -+ at32_wdt_stop(); -+ at32_wdt_disable_source_clock(); -+ } -+ -+ misc_deregister(&wdt->miscdev); -+ if (!cpu_is_at32ap7000()) -+ clk_put(wdt->pclk); -+ iounmap(wdt->regs); -+ kfree(wdt); -+ wdt = NULL; -+ platform_set_drvdata(pdev, NULL); -+ } -+ return 0; -+} -+ -+static void at32_wdt_shutdown(struct platform_device *pdev) -+{ -+ at32_wdt_stop(); -+} -+ -+#ifdef CONFIG_PM -+static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message) -+{ -+ at32_wdt_stop(); -+ return 0; -+} -+ -+static int at32_wdt_resume(struct platform_device *pdev) -+{ -+ if (wdt->users) -+ at32_wdt_start(); -+ return 0; -+} -+#else -+#define at32_wdt_suspend NULL -+#define at32_wdt_resume NULL -+#endif -+ -+/* work with hotplug and coldplug */ -+MODULE_ALIAS("platform:at32_wdt"); -+ -+static struct platform_driver at32_wdt_driver = { -+ .remove = __exit_p(at32_wdt_remove), -+ .suspend = at32_wdt_suspend, -+ .resume = at32_wdt_resume, -+ .driver = { -+ .name = "at32_wdt", -+ .owner = THIS_MODULE, -+ }, -+ .shutdown = at32_wdt_shutdown, -+}; -+ -+static int __init at32_wdt_init(void) -+{ -+ return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe); -+} -+module_init(at32_wdt_init); -+ -+static void __exit at32_wdt_exit(void) -+{ -+ platform_driver_unregister(&at32_wdt_driver); -+} -+module_exit(at32_wdt_exit); -+ -+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); -+MODULE_DESCRIPTION("Watchdog driver for Atmel AVR32 devices"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c -deleted file mode 100644 -index e8ae638..0000000 ---- a/drivers/watchdog/at32ap700x_wdt.c -+++ /dev/null -@@ -1,449 +0,0 @@ --/* -- * Watchdog driver for Atmel AT32AP700X devices -- * -- * Copyright (C) 2005-2006 Atmel Corporation -- * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License version 2 as -- * published by the Free Software Foundation. -- * -- * -- * Errata: WDT Clear is blocked after WDT Reset -- * -- * A watchdog timer event will, after reset, block writes to the WDT_CLEAR -- * register, preventing the program to clear the next Watchdog Timer Reset. -- * -- * If you still want to use the WDT after a WDT reset a small code can be -- * insterted at the startup checking the AVR32_PM.rcause register for WDT reset -- * and use a GPIO pin to reset the system. This method requires that one of the -- * GPIO pins are available and connected externally to the RESET_N pin. After -- * the GPIO pin has pulled down the reset line the GPIO will be reset and leave -- * the pin tristated with pullup. -- */ -- --#include <linux/init.h> --#include <linux/kernel.h> --#include <linux/module.h> --#include <linux/moduleparam.h> --#include <linux/miscdevice.h> --#include <linux/fs.h> --#include <linux/platform_device.h> --#include <linux/watchdog.h> --#include <linux/uaccess.h> --#include <linux/io.h> --#include <linux/spinlock.h> -- --#define TIMEOUT_MIN 1 --#define TIMEOUT_MAX 2 --#define TIMEOUT_DEFAULT TIMEOUT_MAX -- --/* module parameters */ --static int timeout = TIMEOUT_DEFAULT; --module_param(timeout, int, 0); --MODULE_PARM_DESC(timeout, -- "Timeout value. Limited to be 1 or 2 seconds. (default=" -- __MODULE_STRING(TIMEOUT_DEFAULT) ")"); -- --static int nowayout = WATCHDOG_NOWAYOUT; --module_param(nowayout, int, 0); --MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" -- __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -- --/* Watchdog registers and write/read macro */ --#define WDT_CTRL 0x00 --#define WDT_CTRL_EN 0 --#define WDT_CTRL_PSEL 8 --#define WDT_CTRL_KEY 24 -- --#define WDT_CLR 0x04 -- --#define WDT_RCAUSE 0x10 --#define WDT_RCAUSE_POR 0 --#define WDT_RCAUSE_EXT 2 --#define WDT_RCAUSE_WDT 3 --#define WDT_RCAUSE_JTAG 4 --#define WDT_RCAUSE_SERP 5 -- --#define WDT_BIT(name) (1 << WDT_##name) --#define WDT_BF(name, value) ((value) << WDT_##name) -- --#define wdt_readl(dev, reg) \ -- __raw_readl((dev)->regs + WDT_##reg) --#define wdt_writel(dev, reg, value) \ -- __raw_writel((value), (dev)->regs + WDT_##reg) -- --struct wdt_at32ap700x { -- void __iomem *regs; -- spinlock_t io_lock; -- int timeout; -- int boot_status; -- unsigned long users; -- struct miscdevice miscdev; --}; -- --static struct wdt_at32ap700x *wdt; --static char expect_release; -- --/* -- * Disable the watchdog. -- */ --static inline void at32_wdt_stop(void) --{ -- unsigned long psel; -- -- spin_lock(&wdt->io_lock); -- psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f); -- wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55)); -- wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa)); -- spin_unlock(&wdt->io_lock); --} -- --/* -- * Enable and reset the watchdog. -- */ --static inline void at32_wdt_start(void) --{ -- /* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */ -- unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe; -- -- spin_lock(&wdt->io_lock); -- wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN) -- | WDT_BF(CTRL_PSEL, psel) -- | WDT_BF(CTRL_KEY, 0x55)); -- wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN) -- | WDT_BF(CTRL_PSEL, psel) -- | WDT_BF(CTRL_KEY, 0xaa)); -- spin_unlock(&wdt->io_lock); --} -- --/* -- * Pat the watchdog timer. -- */ --static inline void at32_wdt_pat(void) --{ -- spin_lock(&wdt->io_lock); -- wdt_writel(wdt, CLR, 0x42); -- spin_unlock(&wdt->io_lock); --} -- --/* -- * Watchdog device is opened, and watchdog starts running. -- */ --static int at32_wdt_open(struct inode *inode, struct file *file) --{ -- if (test_and_set_bit(1, &wdt->users)) -- return -EBUSY; -- -- at32_wdt_start(); -- return nonseekable_open(inode, file); --} -- --/* -- * Close the watchdog device. -- */ --static int at32_wdt_close(struct inode *inode, struct file *file) --{ -- if (expect_release == 42) { -- at32_wdt_stop(); -- } else { -- dev_dbg(wdt->miscdev.parent, -- "unexpected close, not stopping watchdog!\n"); -- at32_wdt_pat(); -- } -- clear_bit(1, &wdt->users); -- expect_release = 0; -- return 0; --} -- --/* -- * Change the watchdog time interval. -- */ --static int at32_wdt_settimeout(int time) --{ -- /* -- * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is -- * 2 ^ 16 allowing up to 2 seconds timeout. -- */ -- if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX)) -- return -EINVAL; -- -- /* -- * Set new watchdog time. It will be used when at32_wdt_start() is -- * called. -- */ -- wdt->timeout = time; -- return 0; --} -- --/* -- * Get the watchdog status. -- */ --static int at32_wdt_get_status(void) --{ -- int rcause; -- int status = 0; -- -- rcause = wdt_readl(wdt, RCAUSE); -- -- switch (rcause) { -- case WDT_BIT(RCAUSE_EXT): -- status = WDIOF_EXTERN1; -- break; -- case WDT_BIT(RCAUSE_WDT): -- status = WDIOF_CARDRESET; -- break; -- case WDT_BIT(RCAUSE_POR): /* fall through */ -- case WDT_BIT(RCAUSE_JTAG): /* fall through */ -- case WDT_BIT(RCAUSE_SERP): /* fall through */ -- default: -- break; -- } -- -- return status; --} -- --static struct watchdog_info at32_wdt_info = { -- .identity = "at32ap700x watchdog", -- .options = WDIOF_SETTIMEOUT | -- WDIOF_KEEPALIVEPING | -- WDIOF_MAGICCLOSE, --}; -- --/* -- * Handle commands from user-space. -- */ --static long at32_wdt_ioctl(struct file *file, -- unsigned int cmd, unsigned long arg) --{ -- int ret = -ENOTTY; -- int time; -- void __user *argp = (void __user *)arg; -- int __user *p = argp; -- -- switch (cmd) { -- case WDIOC_GETSUPPORT: -- ret = copy_to_user(argp, &at32_wdt_info, -- sizeof(at32_wdt_info)) ? -EFAULT : 0; -- break; -- case WDIOC_GETSTATUS: -- ret = put_user(0, p); -- break; -- case WDIOC_GETBOOTSTATUS: -- ret = put_user(wdt->boot_status, p); -- break; -- case WDIOC_SETOPTIONS: -- ret = get_user(time, p); -- if (ret) -- break; -- if (time & WDIOS_DISABLECARD) -- at32_wdt_stop(); -- if (time & WDIOS_ENABLECARD) -- at32_wdt_start(); -- ret = 0; -- break; -- case WDIOC_KEEPALIVE: -- at32_wdt_pat(); -- ret = 0; -- break; -- case WDIOC_SETTIMEOUT: -- ret = get_user(time, p); -- if (ret) -- break; -- ret = at32_wdt_settimeout(time); -- if (ret) -- break; -- /* Enable new time value */ -- at32_wdt_start(); -- /* fall through */ -- case WDIOC_GETTIMEOUT: -- ret = put_user(wdt->timeout, p); -- break; -- } -- -- return ret; --} -- --static ssize_t at32_wdt_write(struct file *file, const char __user *data, -- size_t len, loff_t *ppos) --{ -- /* See if we got the magic character 'V' and reload the timer */ -- if (len) { -- if (!nowayout) { -- size_t i; -- -- /* -- * note: just in case someone wrote the magic -- * character five months ago... -- */ -- expect_release = 0; -- -- /* -- * scan to see whether or not we got the magic -- * character -- */ -- for (i = 0; i != len; i++) { -- char c; -- if (get_user(c, data + i)) -- return -EFAULT; -- if (c == 'V') -- expect_release = 42; -- } -- } -- /* someone wrote to us, we should pat the watchdog */ -- at32_wdt_pat(); -- } -- return len; --} -- --static const struct file_operations at32_wdt_fops = { -- .owner = THIS_MODULE, -- .llseek = no_llseek, -- .unlocked_ioctl = at32_wdt_ioctl, -- .open = at32_wdt_open, -- .release = at32_wdt_close, -- .write = at32_wdt_write, --}; -- --static int __init at32_wdt_probe(struct platform_device *pdev) --{ -- struct resource *regs; -- int ret; -- -- if (wdt) { -- dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n"); -- return -EBUSY; -- } -- -- regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- if (!regs) { -- dev_dbg(&pdev->dev, "missing mmio resource\n"); -- return -ENXIO; -- } -- -- wdt = kzalloc(sizeof(struct wdt_at32ap700x), GFP_KERNEL); -- if (!wdt) { -- dev_dbg(&pdev->dev, "no memory for wdt structure\n"); -- return -ENOMEM; -- } -- -- wdt->regs = ioremap(regs->start, regs->end - regs->start + 1); -- if (!wdt->regs) { -- ret = -ENOMEM; -- dev_dbg(&pdev->dev, "could not map I/O memory\n"); -- goto err_free; -- } -- -- spin_lock_init(&wdt->io_lock); -- wdt->boot_status = at32_wdt_get_status(); -- -- /* Work-around for watchdog silicon errata. */ -- if (wdt->boot_status & WDIOF_CARDRESET) { -- dev_info(&pdev->dev, "CPU must be reset with external " -- "reset or POR due to silicon errata.\n"); -- ret = -EIO; -- goto err_iounmap; -- } else { -- wdt->users = 0; -- } -- wdt->miscdev.minor = WATCHDOG_MINOR; -- wdt->miscdev.name = "watchdog"; -- wdt->miscdev.fops = &at32_wdt_fops; -- -- if (at32_wdt_settimeout(timeout)) { -- at32_wdt_settimeout(TIMEOUT_DEFAULT); -- dev_dbg(&pdev->dev, -- "default timeout invalid, set to %d sec.\n", -- TIMEOUT_DEFAULT); -- } -- -- ret = misc_register(&wdt->miscdev); -- if (ret) { -- dev_dbg(&pdev->dev, "failed to register wdt miscdev\n"); -- goto err_iounmap; -- } -- -- platform_set_drvdata(pdev, wdt); -- wdt->miscdev.parent = &pdev->dev; -- dev_info(&pdev->dev, -- "AT32AP700X WDT at 0x%p, timeout %d sec (nowayout=%d)\n", -- wdt->regs, wdt->timeout, nowayout); -- -- return 0; -- --err_iounmap: -- iounmap(wdt->regs); --err_free: -- kfree(wdt); -- wdt = NULL; -- return ret; --} -- --static int __exit at32_wdt_remove(struct platform_device *pdev) --{ -- if (wdt && platform_get_drvdata(pdev) == wdt) { -- /* Stop the timer before we leave */ -- if (!nowayout) -- at32_wdt_stop(); -- -- misc_deregister(&wdt->miscdev); -- iounmap(wdt->regs); -- kfree(wdt); -- wdt = NULL; -- platform_set_drvdata(pdev, NULL); -- } -- return 0; --} -- --static void at32_wdt_shutdown(struct platform_device *pdev) --{ -- at32_wdt_stop(); --} -- --#ifdef CONFIG_PM --static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message) --{ -- at32_wdt_stop(); -- return 0; --} -- --static int at32_wdt_resume(struct platform_device *pdev) --{ -- if (wdt->users) -- at32_wdt_start(); -- return 0; --} --#else --#define at32_wdt_suspend NULL --#define at32_wdt_resume NULL --#endif -- --/* work with hotplug and coldplug */ --MODULE_ALIAS("platform:at32_wdt"); -- --static struct platform_driver at32_wdt_driver = { -- .remove = __exit_p(at32_wdt_remove), -- .suspend = at32_wdt_suspend, -- .resume = at32_wdt_resume, -- .driver = { -- .name = "at32_wdt", -- .owner = THIS_MODULE, -- }, -- .shutdown = at32_wdt_shutdown, --}; -- --static int __init at32_wdt_init(void) --{ -- return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe); --} --module_init(at32_wdt_init); -- --static void __exit at32_wdt_exit(void) --{ -- platform_driver_unregister(&at32_wdt_driver); --} --module_exit(at32_wdt_exit); -- --MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); --MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X"); --MODULE_LICENSE("GPL"); --MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -diff --git a/include/linux/Kbuild b/include/linux/Kbuild -index b68ec09..e69646d 100644 ---- a/include/linux/Kbuild -+++ b/include/linux/Kbuild -@@ -23,6 +23,7 @@ header-y += atmapi.h - header-y += atmarp.h - header-y += atmbr2684.h - header-y += atmclip.h -+header-y += atmel_mpopfb.h - header-y += atm_eni.h - header-y += atm_he.h - header-y += atm_idt77105.h -diff --git a/include/linux/atmel_mpopfb.h b/include/linux/atmel_mpopfb.h -new file mode 100644 -index 0000000..cd12e16 ---- /dev/null -+++ b/include/linux/atmel_mpopfb.h -@@ -0,0 +1,112 @@ -+/* -+ * Header file for AT32 MPOP FB Driver -+ * -+ * Data structure and register user interface -+ * -+ * Copyright (C) 2007 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ATMEL_MPOPFB_H__ -+#define __ATMEL_MPOPFB_H__ -+ -+#include <linux/fb.h> -+#include <linux/ioctl.h> -+ -+/* Coefficients for conversion to rgb. */ -+struct atmel_mpopfb_rgbconv_coeffs { -+ int r1, r2, r3, r4; -+ int g1, g2, g3, g4; -+ int b1, b2, b3, b4; -+}; -+ -+struct atmel_mpopfb_baseimg_info { -+ /* Position of the mpop base image -+ in the image sent to the LCD. */ -+ unsigned xpos; -+ unsigned ypos; -+ -+ /* The size of the base image after scaling. */ -+ unsigned xsize; -+ unsigned ysize; -+ -+ /* Signal that we should flip the video. */ -+ int flip; -+ -+}; -+ -+enum atmel_mpopfb_overlay_type { -+ ATMEL_MPOPFB_OVERLAY1 = 0, -+ ATMEL_MPOPFB_OVERLAY2 = 1, -+ ATMEL_MPOPFB_CURSOR = 2 -+}; -+ -+struct atmel_mpopfb_overlay_info { -+ /* Position of the mpop overlay image -+ in the image sent to the LCD. */ -+ unsigned xpos; -+ unsigned ypos; -+ /* The size of the overlay image. */ -+ unsigned xsize; -+ unsigned ysize; -+ /* Signal which overlay this info is for. */ -+ enum atmel_mpopfb_overlay_type overlay; -+ /* Signal if the overlay is enabled. */ -+ unsigned enabled; -+}; -+ -+struct atmel_mpopfb_overlay_palette_entry { -+ unsigned char alpha; -+ unsigned char red; -+ unsigned char green; -+ unsigned char blue; -+}; -+ -+struct atmel_mpopfb_cursor_palette_entry { -+ unsigned char:6; -+ unsigned char invert:1; -+ unsigned char visible:1; -+ unsigned char red; -+ unsigned char green; -+ unsigned char blue; -+}; -+ -+struct atmel_mpopfb_overlay_palette { -+ struct atmel_mpopfb_overlay_palette_entry entry[256]; -+}; -+ -+struct atmel_mpopfb_cursor_palette { -+ struct atmel_mpopfb_cursor_palette_entry entry[4]; -+}; -+ -+#define ATMEL_MPOP_FBIOPUT_BASEIMG_INFO _IOW('x',0,struct atmel_mpopfb_baseimg_info) -+#define ATMEL_MPOP_FBIOGET_BASEIMG_INFO _IOR('x',1,struct atmel_mpopfb_baseimg_info) -+#define ATMEL_MPOP_FBIOPUT_OVERLAY_INFO _IOW('x',2,struct atmel_mpopfb_overlay_info) -+#define ATMEL_MPOP_FBIO_CONNECT_TO_LCDC _IO( 'x',4) -+#define ATMEL_MPOP_FBIO_DISCONNECT_FROM_LCDC _IO( 'x',5) -+#define ATMEL_MPOP_FBIOPUT_RGBCONV_COEFFS _IOW('x',6,struct atmel_mpopfb_rgbconv_coeffs) -+#define ATMEL_MPOP_FBIOGET_RGBCONV_COEFFS _IOR('x',7,struct atmel_mpopfb_rgbconv_coeffs) -+#define ATMEL_MPOP_FBIOPUT_OVERLAY_PALETTE _IOW('x',8,struct atmel_mpopfb_overlay_palette) -+#define ATMEL_MPOP_FBIOGET_OVERLAY_PALETTE _IOR('x',9,struct atmel_mpopfb_overlay_palette) -+#define ATMEL_MPOP_FBIOPUT_CURSOR_PALETTE _IOW('x',10,struct atmel_mpopfb_cursor_palette) -+#define ATMEL_MPOP_FBIOGET_CURSOR_PALETTE _IOR('x',11,struct atmel_mpopfb_cursor_palette) -+ -+#define ATMEL_MPOP_RESIZE_FRAC_BITS 5 -+#define ATMEL_MPOP_SCALE_FRAC_DIV(a,b) ((((a) << ATMEL_MPOP_RESIZE_FRAC_BITS))/(b)) -+#define ATMEL_MPOP_CALC_SCALE(from_res,to_res) ATMEL_MPOP_SCALE_FRAC_DIV(from_res, to_res) -+ -+#define ATMEL_MPOP_COEFF_FRAC_BITS 8 -+ -+#endif -diff --git a/include/linux/atmel_pdca.h b/include/linux/atmel_pdca.h -new file mode 100644 -index 0000000..a2ee314 ---- /dev/null -+++ b/include/linux/atmel_pdca.h -@@ -0,0 +1,120 @@ -+/* -+ * Driver for the Atmel PDCA Peripheral DMA Controller -+ * -+ * Copyright (C) 2008 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#ifndef __ATMEL_PDCA_H -+#define __ATMEL_PDCA_H -+ -+#include <linux/dmaengine.h> -+#include <linux/interrupt.h> -+#include <linux/kernel.h> -+#include <linux/list.h> -+ -+struct pdca_pdata { -+ unsigned int nr_channels; -+}; -+ -+struct pdca_slave { -+ struct dma_slave slave; -+ u8 tx_periph_id; -+ u8 rx_periph_id; -+}; -+ -+struct pdca_desc { -+ /* This controller does not support hardware descriptors */ -+ struct scatterlist *sg; -+ int sg_len; -+ u8 reg_width; -+ u8 periph_id; -+ -+ struct list_head desc_node; -+ struct dma_async_tx_descriptor txd; -+}; -+ -+struct pdca_chan { -+ struct list_head freelist; -+ struct list_head queue; -+ -+ spinlock_t lock; -+ void __iomem *regs; -+ -+ struct scatterlist *cur_sg; -+ struct scatterlist *next_sg; -+ -+ struct tasklet_struct tasklet; -+ -+ dma_cookie_t completed; -+ struct dma_chan chan; -+ struct pdca_slave *pslave; -+ unsigned int descs_allocated; -+ bool enabled; -+}; -+ -+struct pdca_dev { -+ struct clk *hclk; -+ struct clk *pclk; -+ struct dma_device dma; -+ void __iomem *regs; -+ -+ struct pdca_chan chan[]; -+}; -+ -+static inline struct pdca_slave *dma_to_pdca_slave(struct dma_slave *slave) -+{ -+ return container_of(slave, struct pdca_slave, slave); -+} -+ -+static inline struct pdca_desc *txd_to_pdca_desc( -+ struct dma_async_tx_descriptor *txd) -+{ -+ return container_of(txd, struct pdca_desc, txd); -+} -+ -+static inline struct pdca_chan *dma_to_pdca_chan(struct dma_chan *chan) -+{ -+ return container_of(chan, struct pdca_chan, chan); -+} -+ -+static inline struct pdca_dev *dma_to_pdca_dev(struct dma_device *dma) -+{ -+ return container_of(dma, struct pdca_dev, dma); -+} -+ -+/* PDCA per-channel register definitions */ -+#define PDCA_MAR 0x0000 /* Memory Address */ -+#define PDCA_PSR 0x0004 /* Peripheral Select */ -+#define PDCA_TCR 0x0008 /* Transfer Counter */ -+#define PDCA_MARR 0x000c /* Memory Address Reload */ -+#define PDCA_TCRR 0x0010 /* Transfer Counter Reload */ -+#define PDCA_CR 0x0014 /* Control */ -+# define PDCA_CR_TEN ( 1 << 0) /* Transfer Enable */ -+# define PDCA_CR_TDIS ( 1 << 1) /* Transfer Disable */ -+# define PDCA_CR_ECLR ( 1 << 8) /* Error Clear */ -+#define PDCA_MR 0x0018 /* Mode */ -+# define PDCA_SIZE_BYTE ( 0 << 0) /* 8 bits per transfer */ -+# define PDCA_SIZE_HWORD ( 1 << 0) /* 16 bits per transfer */ -+# define PDCA_SIZE_WORD ( 2 << 0) /* 32 bits per transfer */ -+#define PDCA_SR 0x001c /* Status */ -+# define PDCA_SR_TEN ( 1 << 0) /* Transfer Enabled */ -+#define PDCA_IER 0x0020 /* Interrupt Enable */ -+#define PDCA_IDR 0x0024 /* Interrupt Disable */ -+#define PDCA_IMR 0x0028 /* Interrupt Mask */ -+#define PDCA_ISR 0x002c /* Interrupt Status */ -+# define PDCA_RCZ ( 1 << 0) /* Reload Counter Zero */ -+# define PDCA_TRC ( 1 << 1) /* Transfer Complete */ -+# define PDCA_TERR ( 1 << 2) /* Transfer Error */ -+ -+/* Address space occupied by one channel */ -+#define PDCA_CHAN_SIZE 0x40 -+ -+#define pdca_readl(base, reg) \ -+ __raw_readl((base) + PDCA_##reg) -+#define pdca_writel(base, reg, value) \ -+ __raw_writel((value), (base) + PDCA_##reg) -+ -+#endif /* __ATMEL_PDCA_H */ -diff --git a/include/linux/spi/atmel_spi.h b/include/linux/spi/atmel_spi.h -new file mode 100644 -index 0000000..88ae568 ---- /dev/null -+++ b/include/linux/spi/atmel_spi.h -@@ -0,0 +1,20 @@ -+/* -+ * Driver for Atmel AT32 and AT91 SPI Controllers -+ * -+ * Copyright (C) 2008 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#ifndef __LINUX_SPI_ATMEL_SPI_H -+#define __LINUX_SPI_ATMEL_SPI_H -+ -+struct atmel_spi_pdata { -+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC -+ struct dma_slave *rx_dma_slave; -+ struct dma_slave *tx_dma_slave; -+#endif -+}; -+ -+#endif /* __LINUX_SPI_ATMEL_SPI_H */ -diff --git a/include/video/atmel_mpop.h b/include/video/atmel_mpop.h -new file mode 100644 -index 0000000..60270b8 ---- /dev/null -+++ b/include/video/atmel_mpop.h -@@ -0,0 +1,820 @@ -+/* -+ * Header file for AT32 MPOP Controller -+ * -+ * Data structure and register user interface -+ * -+ * Copyright (C) 2007 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ATMEL_MPOP_H__ -+#define __ATMEL_MPOP_H__ -+ -+#include <linux/atmel_mpopfb.h> -+ -+/* MPOP Controller info data structure */ -+struct atmel_mpopfb_info { -+ spinlock_t lock; -+ struct fb_info *info; -+ void __iomem *mmio; -+ unsigned long irq_base; -+ void *slave_base; -+ -+ struct platform_device *pdev; -+ struct platform_device *lcdc_pdev; -+ struct clk *mpop_hclk; -+ struct clk *mpop_pclk; -+ unsigned int running; -+ unsigned int connected_to_lcdc; -+ unsigned long lcdc_old_smem_start; -+ unsigned long lcdc_old_bits_per_pixel; -+ struct atmel_mpopfb_baseimg_info baseimg_info; -+ struct atmel_mpopfb_overlay_info overlay_info[3]; -+ struct atmel_mpopfb_rgbconv_coeffs rgbconv_coeffs; -+}; -+ -+/* TODO! Clean up these defines.... */ -+#define ATMEL_MPOP_B 0 -+#define ATMEL_MPOP_B1 0 -+#define ATMEL_MPOP_B1_MASK 0x00000fff -+#define ATMEL_MPOP_B1_OFFSET 0 -+#define ATMEL_MPOP_B1_SIZE 12 -+#define ATMEL_MPOP_B2 12 -+#define ATMEL_MPOP_B2B1 0x00000024 -+#define ATMEL_MPOP_B2B1_B1 0 -+#define ATMEL_MPOP_B2B1_B1_MASK 0x00000fff -+#define ATMEL_MPOP_B2B1_B1_OFFSET 0 -+#define ATMEL_MPOP_B2B1_B1_SIZE 12 -+#define ATMEL_MPOP_B2B1_B2 12 -+#define ATMEL_MPOP_B2B1_B2_MASK 0x00fff000 -+#define ATMEL_MPOP_B2B1_B2_OFFSET 12 -+#define ATMEL_MPOP_B2B1_B2_SIZE 12 -+#define ATMEL_MPOP_B2_MASK 0x00fff000 -+#define ATMEL_MPOP_B2_OFFSET 12 -+#define ATMEL_MPOP_B2_SIZE 12 -+#define ATMEL_MPOP_B3 0 -+#define ATMEL_MPOP_B3_MASK 0x00000fff -+#define ATMEL_MPOP_B3_OFFSET 0 -+#define ATMEL_MPOP_B3_SIZE 12 -+#define ATMEL_MPOP_B4 12 -+#define ATMEL_MPOP_B4B3 0x00000028 -+#define ATMEL_MPOP_B4B3_B3 0 -+#define ATMEL_MPOP_B4B3_B3_MASK 0x00000fff -+#define ATMEL_MPOP_B4B3_B3_OFFSET 0 -+#define ATMEL_MPOP_B4B3_B3_SIZE 12 -+#define ATMEL_MPOP_B4B3_B4 12 -+#define ATMEL_MPOP_B4B3_B4_MASK 0xfffff000 -+#define ATMEL_MPOP_B4B3_B4_OFFSET 12 -+#define ATMEL_MPOP_B4B3_B4_SIZE 20 -+#define ATMEL_MPOP_B4_MASK 0xfffff000 -+#define ATMEL_MPOP_B4_OFFSET 12 -+#define ATMEL_MPOP_B4_SIZE 20 -+#define ATMEL_MPOP_BGCOLOR 0x00000090 -+#define ATMEL_MPOP_BGCOLOR_BGCOLOR 0 -+#define ATMEL_MPOP_BGCOLOR_BGCOLOR_MASK 0xffffffff -+#define ATMEL_MPOP_BGCOLOR_BGCOLOR_OFFSET 0 -+#define ATMEL_MPOP_BGCOLOR_BGCOLOR_SIZE 32 -+#define ATMEL_MPOP_BGCOLOR_MASK 0xffffffff -+#define ATMEL_MPOP_BGCOLOR_OFFSET 0 -+#define ATMEL_MPOP_BGCOLOR_SIZE 32 -+#define ATMEL_MPOP_BGR 6 -+#define ATMEL_MPOP_BGR_MASK 0x00000040 -+#define ATMEL_MPOP_BGR_OFFSET 6 -+#define ATMEL_MPOP_BGR_SIZE 1 -+#define ATMEL_MPOP_B_MASK 0x000000ff -+#define ATMEL_MPOP_B_OFFSET 0 -+#define ATMEL_MPOP_B_SIZE 8 -+#define ATMEL_MPOP_CACHEDIS 8 -+#define ATMEL_MPOP_CACHEDIS_MASK 0x00000100 -+#define ATMEL_MPOP_CACHEDIS_OFFSET 8 -+#define ATMEL_MPOP_CACHEDIS_SIZE 1 -+#define ATMEL_MPOP_CR 0x00000000 -+#define ATMEL_MPOP_CR_CACHEDIS 8 -+#define ATMEL_MPOP_CR_CACHEDIS_MASK 0x00000100 -+#define ATMEL_MPOP_CR_CACHEDIS_OFFSET 8 -+#define ATMEL_MPOP_CR_CACHEDIS_SIZE 1 -+#define ATMEL_MPOP_CR_EN 0 -+#define ATMEL_MPOP_CR_EN_MASK 0x00000001 -+#define ATMEL_MPOP_CR_EN_OFFSET 0 -+#define ATMEL_MPOP_CR_EN_SIZE 1 -+#define ATMEL_MPOP_CR_OUT_BGR 3 -+#define ATMEL_MPOP_CR_OUT_BGR_MASK 0x00000008 -+#define ATMEL_MPOP_CR_OUT_BGR_OFFSET 3 -+#define ATMEL_MPOP_CR_OUT_BGR_SIZE 1 -+#define ATMEL_MPOP_CR_OUT_CTRL 2 -+#define ATMEL_MPOP_CR_OUT_CTRL_MASK 0x00000004 -+#define ATMEL_MPOP_CR_OUT_CTRL_OFFSET 2 -+#define ATMEL_MPOP_CR_OUT_CTRL_SIZE 1 -+#define ATMEL_MPOP_CR_START 1 -+#define ATMEL_MPOP_CR_START_MASK 0x00000002 -+#define ATMEL_MPOP_CR_START_OFFSET 1 -+#define ATMEL_MPOP_CR_START_SIZE 1 -+#define ATMEL_MPOP_CURSOREN 0 -+#define ATMEL_MPOP_CURSOREN_MASK 0x00000001 -+#define ATMEL_MPOP_CURSOREN_OFFSET 0 -+#define ATMEL_MPOP_CURSOREN_SIZE 1 -+#define ATMEL_MPOP_CURSOR_P0 0x00000080 -+#define ATMEL_MPOP_CURSOR_P0_B 0 -+#define ATMEL_MPOP_CURSOR_P0_B_MASK 0x000000ff -+#define ATMEL_MPOP_CURSOR_P0_B_OFFSET 0 -+#define ATMEL_MPOP_CURSOR_P0_B_SIZE 8 -+#define ATMEL_MPOP_CURSOR_P0_G 8 -+#define ATMEL_MPOP_CURSOR_P0_G_MASK 0x0000ff00 -+#define ATMEL_MPOP_CURSOR_P0_G_OFFSET 8 -+#define ATMEL_MPOP_CURSOR_P0_G_SIZE 8 -+#define ATMEL_MPOP_CURSOR_P0_INVERT 25 -+#define ATMEL_MPOP_CURSOR_P0_INVERT_MASK 0x02000000 -+#define ATMEL_MPOP_CURSOR_P0_INVERT_OFFSET 25 -+#define ATMEL_MPOP_CURSOR_P0_INVERT_SIZE 1 -+#define ATMEL_MPOP_CURSOR_P0_R 16 -+#define ATMEL_MPOP_CURSOR_P0_R_MASK 0x00ff0000 -+#define ATMEL_MPOP_CURSOR_P0_R_OFFSET 16 -+#define ATMEL_MPOP_CURSOR_P0_R_SIZE 8 -+#define ATMEL_MPOP_CURSOR_P0_VISIBLE 24 -+#define ATMEL_MPOP_CURSOR_P0_VISIBLE_MASK 0x01000000 -+#define ATMEL_MPOP_CURSOR_P0_VISIBLE_OFFSET 24 -+#define ATMEL_MPOP_CURSOR_P0_VISIBLE_SIZE 1 -+#define ATMEL_MPOP_CURSOR_P1 0x00000084 -+#define ATMEL_MPOP_CURSOR_P1_B 0 -+#define ATMEL_MPOP_CURSOR_P1_B_MASK 0x000000ff -+#define ATMEL_MPOP_CURSOR_P1_B_OFFSET 0 -+#define ATMEL_MPOP_CURSOR_P1_B_SIZE 8 -+#define ATMEL_MPOP_CURSOR_P1_G 8 -+#define ATMEL_MPOP_CURSOR_P1_G_MASK 0x0000ff00 -+#define ATMEL_MPOP_CURSOR_P1_G_OFFSET 8 -+#define ATMEL_MPOP_CURSOR_P1_G_SIZE 8 -+#define ATMEL_MPOP_CURSOR_P1_INVERT 25 -+#define ATMEL_MPOP_CURSOR_P1_INVERT_MASK 0x02000000 -+#define ATMEL_MPOP_CURSOR_P1_INVERT_OFFSET 25 -+#define ATMEL_MPOP_CURSOR_P1_INVERT_SIZE 1 -+#define ATMEL_MPOP_CURSOR_P1_R 16 -+#define ATMEL_MPOP_CURSOR_P1_R_MASK 0x00ff0000 -+#define ATMEL_MPOP_CURSOR_P1_R_OFFSET 16 -+#define ATMEL_MPOP_CURSOR_P1_R_SIZE 8 -+#define ATMEL_MPOP_CURSOR_P1_VISIBLE 24 -+#define ATMEL_MPOP_CURSOR_P1_VISIBLE_MASK 0x01000000 -+#define ATMEL_MPOP_CURSOR_P1_VISIBLE_OFFSET 24 -+#define ATMEL_MPOP_CURSOR_P1_VISIBLE_SIZE 1 -+#define ATMEL_MPOP_CURSOR_P2 0x00000088 -+#define ATMEL_MPOP_CURSOR_P2_B 0 -+#define ATMEL_MPOP_CURSOR_P2_B_MASK 0x000000ff -+#define ATMEL_MPOP_CURSOR_P2_B_OFFSET 0 -+#define ATMEL_MPOP_CURSOR_P2_B_SIZE 8 -+#define ATMEL_MPOP_CURSOR_P2_G 8 -+#define ATMEL_MPOP_CURSOR_P2_G_MASK 0x0000ff00 -+#define ATMEL_MPOP_CURSOR_P2_G_OFFSET 8 -+#define ATMEL_MPOP_CURSOR_P2_G_SIZE 8 -+#define ATMEL_MPOP_CURSOR_P2_INVERT 25 -+#define ATMEL_MPOP_CURSOR_P2_INVERT_MASK 0x02000000 -+#define ATMEL_MPOP_CURSOR_P2_INVERT_OFFSET 25 -+#define ATMEL_MPOP_CURSOR_P2_INVERT_SIZE 1 -+#define ATMEL_MPOP_CURSOR_P2_R 16 -+#define ATMEL_MPOP_CURSOR_P2_R_MASK 0x00ff0000 -+#define ATMEL_MPOP_CURSOR_P2_R_OFFSET 16 -+#define ATMEL_MPOP_CURSOR_P2_R_SIZE 8 -+#define ATMEL_MPOP_CURSOR_P2_VISIBLE 24 -+#define ATMEL_MPOP_CURSOR_P2_VISIBLE_MASK 0x01000000 -+#define ATMEL_MPOP_CURSOR_P2_VISIBLE_OFFSET 24 -+#define ATMEL_MPOP_CURSOR_P2_VISIBLE_SIZE 1 -+#define ATMEL_MPOP_CURSOR_P3 0x0000008c -+#define ATMEL_MPOP_CURSOR_P3_B 0 -+#define ATMEL_MPOP_CURSOR_P3_B_MASK 0x000000ff -+#define ATMEL_MPOP_CURSOR_P3_B_OFFSET 0 -+#define ATMEL_MPOP_CURSOR_P3_B_SIZE 8 -+#define ATMEL_MPOP_CURSOR_P3_G 8 -+#define ATMEL_MPOP_CURSOR_P3_G_MASK 0x0000ff00 -+#define ATMEL_MPOP_CURSOR_P3_G_OFFSET 8 -+#define ATMEL_MPOP_CURSOR_P3_G_SIZE 8 -+#define ATMEL_MPOP_CURSOR_P3_INVERT 25 -+#define ATMEL_MPOP_CURSOR_P3_INVERT_MASK 0x02000000 -+#define ATMEL_MPOP_CURSOR_P3_INVERT_OFFSET 25 -+#define ATMEL_MPOP_CURSOR_P3_INVERT_SIZE 1 -+#define ATMEL_MPOP_CURSOR_P3_R 16 -+#define ATMEL_MPOP_CURSOR_P3_R_MASK 0x00ff0000 -+#define ATMEL_MPOP_CURSOR_P3_R_OFFSET 16 -+#define ATMEL_MPOP_CURSOR_P3_R_SIZE 8 -+#define ATMEL_MPOP_CURSOR_P3_VISIBLE 24 -+#define ATMEL_MPOP_CURSOR_P3_VISIBLE_MASK 0x01000000 -+#define ATMEL_MPOP_CURSOR_P3_VISIBLE_OFFSET 24 -+#define ATMEL_MPOP_CURSOR_P3_VISIBLE_SIZE 1 -+#define ATMEL_MPOP_CURSOR_POS 0x00000058 -+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X 11 -+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X_MASK 0x003ff800 -+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X_OFFSET 11 -+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X_SIZE 11 -+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y 0 -+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y_MASK 0x000007ff -+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y_OFFSET 0 -+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y_SIZE 11 -+#define ATMEL_MPOP_CURSOR_POS_X 11 -+#define ATMEL_MPOP_CURSOR_POS_X_MASK 0x003ff800 -+#define ATMEL_MPOP_CURSOR_POS_X_OFFSET 11 -+#define ATMEL_MPOP_CURSOR_POS_X_SIZE 11 -+#define ATMEL_MPOP_CURSOR_POS_Y 0 -+#define ATMEL_MPOP_CURSOR_POS_Y_MASK 0x000007ff -+#define ATMEL_MPOP_CURSOR_POS_Y_OFFSET 0 -+#define ATMEL_MPOP_CURSOR_POS_Y_SIZE 11 -+#define ATMEL_MPOP_CURSOR_SAR 0x00000048 -+#define ATMEL_MPOP_CURSOR_SAR_CURSOR_SAR 0 -+#define ATMEL_MPOP_CURSOR_SAR_CURSOR_SAR_MASK 0xffffffff -+#define ATMEL_MPOP_CURSOR_SAR_CURSOR_SAR_OFFSET 0 -+#define ATMEL_MPOP_CURSOR_SAR_CURSOR_SAR_SIZE 32 -+#define ATMEL_MPOP_CURSOR_SAR_MASK 0xffffffff -+#define ATMEL_MPOP_CURSOR_SAR_OFFSET 0 -+#define ATMEL_MPOP_CURSOR_SAR_SIZE 32 -+#define ATMEL_MPOP_CURSOR_SIZE 0x0000006c -+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X 11 -+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X_MASK 0x003ff800 -+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X_OFFSET 11 -+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X_SIZE 11 -+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y 0 -+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y_MASK 0x000007ff -+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y_OFFSET 0 -+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y_SIZE 11 -+#define ATMEL_MPOP_CURSOR_SIZE_X 11 -+#define ATMEL_MPOP_CURSOR_SIZE_X_MASK 0x003ff800 -+#define ATMEL_MPOP_CURSOR_SIZE_X_OFFSET 11 -+#define ATMEL_MPOP_CURSOR_SIZE_X_SIZE 11 -+#define ATMEL_MPOP_CURSOR_SIZE_Y 0 -+#define ATMEL_MPOP_CURSOR_SIZE_Y_MASK 0x000007ff -+#define ATMEL_MPOP_CURSOR_SIZE_Y_OFFSET 0 -+#define ATMEL_MPOP_CURSOR_SIZE_Y_SIZE 11 -+#define ATMEL_MPOP_CURSOR_WTC 0x0000007c -+#define ATMEL_MPOP_CURSOR_WTC_CURSOR_WTC 0 -+#define ATMEL_MPOP_CURSOR_WTC_CURSOR_WTC_MASK 0xffffffff -+#define ATMEL_MPOP_CURSOR_WTC_CURSOR_WTC_OFFSET 0 -+#define ATMEL_MPOP_CURSOR_WTC_CURSOR_WTC_SIZE 32 -+#define ATMEL_MPOP_CURSOR_WTC_MASK 0xffffffff -+#define ATMEL_MPOP_CURSOR_WTC_OFFSET 0 -+#define ATMEL_MPOP_CURSOR_WTC_SIZE 32 -+#define ATMEL_MPOP_DISP_MAX_COORD 0x00000010 -+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_X 11 -+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_X_MASK 0x003ff800 -+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_X_OFFSET 11 -+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_X_SIZE 11 -+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_Y 0 -+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_Y_MASK 0x000007ff -+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_Y_OFFSET 0 -+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_Y_SIZE 11 -+#define ATMEL_MPOP_DISP_MAX_COORD_X 11 -+#define ATMEL_MPOP_DISP_MAX_COORD_X_MASK 0x003ff800 -+#define ATMEL_MPOP_DISP_MAX_COORD_X_OFFSET 11 -+#define ATMEL_MPOP_DISP_MAX_COORD_X_SIZE 11 -+#define ATMEL_MPOP_DISP_MAX_COORD_Y 0 -+#define ATMEL_MPOP_DISP_MAX_COORD_Y_MASK 0x000007ff -+#define ATMEL_MPOP_DISP_MAX_COORD_Y_OFFSET 0 -+#define ATMEL_MPOP_DISP_MAX_COORD_Y_SIZE 11 -+#define ATMEL_MPOP_EN 0 -+#define ATMEL_MPOP_EN_MASK 0x00000001 -+#define ATMEL_MPOP_EN_OFFSET 0 -+#define ATMEL_MPOP_EN_SIZE 1 -+#define ATMEL_MPOP_EOP 3 -+#define ATMEL_MPOP_EOP_MASK 0x00000008 -+#define ATMEL_MPOP_EOP_OFFSET 3 -+#define ATMEL_MPOP_EOP_SIZE 1 -+#define ATMEL_MPOP_G 8 -+#define ATMEL_MPOP_G1 0 -+#define ATMEL_MPOP_G1_MASK 0x00000fff -+#define ATMEL_MPOP_G1_OFFSET 0 -+#define ATMEL_MPOP_G1_SIZE 12 -+#define ATMEL_MPOP_G2 12 -+#define ATMEL_MPOP_G2G1 0x0000001c -+#define ATMEL_MPOP_G2G1_G1 0 -+#define ATMEL_MPOP_G2G1_G1_MASK 0x00000fff -+#define ATMEL_MPOP_G2G1_G1_OFFSET 0 -+#define ATMEL_MPOP_G2G1_G1_SIZE 12 -+#define ATMEL_MPOP_G2G1_G2 12 -+#define ATMEL_MPOP_G2G1_G2_MASK 0x00fff000 -+#define ATMEL_MPOP_G2G1_G2_OFFSET 12 -+#define ATMEL_MPOP_G2G1_G2_SIZE 12 -+#define ATMEL_MPOP_G2_MASK 0x00fff000 -+#define ATMEL_MPOP_G2_OFFSET 12 -+#define ATMEL_MPOP_G2_SIZE 12 -+#define ATMEL_MPOP_G3 0 -+#define ATMEL_MPOP_G3_MASK 0x00000fff -+#define ATMEL_MPOP_G3_OFFSET 0 -+#define ATMEL_MPOP_G3_SIZE 12 -+#define ATMEL_MPOP_G4 12 -+#define ATMEL_MPOP_G4G3 0x00000020 -+#define ATMEL_MPOP_G4G3_G3 0 -+#define ATMEL_MPOP_G4G3_G3_MASK 0x00000fff -+#define ATMEL_MPOP_G4G3_G3_OFFSET 0 -+#define ATMEL_MPOP_G4G3_G3_SIZE 12 -+#define ATMEL_MPOP_G4G3_G4 12 -+#define ATMEL_MPOP_G4G3_G4_MASK 0xfffff000 -+#define ATMEL_MPOP_G4G3_G4_OFFSET 12 -+#define ATMEL_MPOP_G4G3_G4_SIZE 20 -+#define ATMEL_MPOP_G4_MASK 0xfffff000 -+#define ATMEL_MPOP_G4_OFFSET 12 -+#define ATMEL_MPOP_G4_SIZE 20 -+#define ATMEL_MPOP_G_MASK 0x0000ff00 -+#define ATMEL_MPOP_G_OFFSET 8 -+#define ATMEL_MPOP_G_SIZE 8 -+#define ATMEL_MPOP_INTCLEAR 0x000000b0 -+#define ATMEL_MPOP_INTCLEAR_EOP 3 -+#define ATMEL_MPOP_INTCLEAR_EOP_MASK 0x00000008 -+#define ATMEL_MPOP_INTCLEAR_EOP_OFFSET 3 -+#define ATMEL_MPOP_INTCLEAR_EOP_SIZE 1 -+#define ATMEL_MPOP_INTCLEAR_OUT 2 -+#define ATMEL_MPOP_INTCLEAR_OUT_MASK 0x00000004 -+#define ATMEL_MPOP_INTCLEAR_OUT_OFFSET 2 -+#define ATMEL_MPOP_INTCLEAR_OUT_SIZE 1 -+#define ATMEL_MPOP_INTCLEAR_OVERLAY 1 -+#define ATMEL_MPOP_INTCLEAR_OVERLAY_MASK 0x00000002 -+#define ATMEL_MPOP_INTCLEAR_OVERLAY_OFFSET 1 -+#define ATMEL_MPOP_INTCLEAR_OVERLAY_SIZE 1 -+#define ATMEL_MPOP_INTCLEAR_SOP 4 -+#define ATMEL_MPOP_INTCLEAR_SOP_MASK 0x00000010 -+#define ATMEL_MPOP_INTCLEAR_SOP_OFFSET 4 -+#define ATMEL_MPOP_INTCLEAR_SOP_SIZE 1 -+#define ATMEL_MPOP_INTCLEAR_YUV 0 -+#define ATMEL_MPOP_INTCLEAR_YUV_MASK 0x00000001 -+#define ATMEL_MPOP_INTCLEAR_YUV_OFFSET 0 -+#define ATMEL_MPOP_INTCLEAR_YUV_SIZE 1 -+#define ATMEL_MPOP_INTDIS 0x000000a4 -+#define ATMEL_MPOP_INTDIS_EOP 3 -+#define ATMEL_MPOP_INTDIS_EOP_MASK 0x00000008 -+#define ATMEL_MPOP_INTDIS_EOP_OFFSET 3 -+#define ATMEL_MPOP_INTDIS_EOP_SIZE 1 -+#define ATMEL_MPOP_INTDIS_OUT 2 -+#define ATMEL_MPOP_INTDIS_OUT_MASK 0x00000004 -+#define ATMEL_MPOP_INTDIS_OUT_OFFSET 2 -+#define ATMEL_MPOP_INTDIS_OUT_SIZE 1 -+#define ATMEL_MPOP_INTDIS_OVERLAY 1 -+#define ATMEL_MPOP_INTDIS_OVERLAY_MASK 0x00000002 -+#define ATMEL_MPOP_INTDIS_OVERLAY_OFFSET 1 -+#define ATMEL_MPOP_INTDIS_OVERLAY_SIZE 1 -+#define ATMEL_MPOP_INTDIS_SOP 4 -+#define ATMEL_MPOP_INTDIS_SOP_MASK 0x00000010 -+#define ATMEL_MPOP_INTDIS_SOP_OFFSET 4 -+#define ATMEL_MPOP_INTDIS_SOP_SIZE 1 -+#define ATMEL_MPOP_INTDIS_YUV 0 -+#define ATMEL_MPOP_INTDIS_YUV_MASK 0x00000001 -+#define ATMEL_MPOP_INTDIS_YUV_OFFSET 0 -+#define ATMEL_MPOP_INTDIS_YUV_SIZE 1 -+#define ATMEL_MPOP_INTEN 0x000000a0 -+#define ATMEL_MPOP_INTEN_EOP 3 -+#define ATMEL_MPOP_INTEN_EOP_MASK 0x00000008 -+#define ATMEL_MPOP_INTEN_EOP_OFFSET 3 -+#define ATMEL_MPOP_INTEN_EOP_SIZE 1 -+#define ATMEL_MPOP_INTEN_OUT 2 -+#define ATMEL_MPOP_INTEN_OUT_MASK 0x00000004 -+#define ATMEL_MPOP_INTEN_OUT_OFFSET 2 -+#define ATMEL_MPOP_INTEN_OUT_SIZE 1 -+#define ATMEL_MPOP_INTEN_OVERLAY 1 -+#define ATMEL_MPOP_INTEN_OVERLAY_MASK 0x00000002 -+#define ATMEL_MPOP_INTEN_OVERLAY_OFFSET 1 -+#define ATMEL_MPOP_INTEN_OVERLAY_SIZE 1 -+#define ATMEL_MPOP_INTEN_SOP 4 -+#define ATMEL_MPOP_INTEN_SOP_MASK 0x00000010 -+#define ATMEL_MPOP_INTEN_SOP_OFFSET 4 -+#define ATMEL_MPOP_INTEN_SOP_SIZE 1 -+#define ATMEL_MPOP_INTEN_YUV 0 -+#define ATMEL_MPOP_INTEN_YUV_MASK 0x00000001 -+#define ATMEL_MPOP_INTEN_YUV_OFFSET 0 -+#define ATMEL_MPOP_INTEN_YUV_SIZE 1 -+#define ATMEL_MPOP_INTMASK 0x000000a8 -+#define ATMEL_MPOP_INTMASK_EOP 3 -+#define ATMEL_MPOP_INTMASK_EOP_MASK 0x00000008 -+#define ATMEL_MPOP_INTMASK_EOP_OFFSET 3 -+#define ATMEL_MPOP_INTMASK_EOP_SIZE 1 -+#define ATMEL_MPOP_INTMASK_OUT 2 -+#define ATMEL_MPOP_INTMASK_OUT_MASK 0x00000004 -+#define ATMEL_MPOP_INTMASK_OUT_OFFSET 2 -+#define ATMEL_MPOP_INTMASK_OUT_SIZE 1 -+#define ATMEL_MPOP_INTMASK_OVERLAY 1 -+#define ATMEL_MPOP_INTMASK_OVERLAY_MASK 0x00000002 -+#define ATMEL_MPOP_INTMASK_OVERLAY_OFFSET 1 -+#define ATMEL_MPOP_INTMASK_OVERLAY_SIZE 1 -+#define ATMEL_MPOP_INTMASK_SOP 4 -+#define ATMEL_MPOP_INTMASK_SOP_MASK 0x00000010 -+#define ATMEL_MPOP_INTMASK_SOP_OFFSET 4 -+#define ATMEL_MPOP_INTMASK_SOP_SIZE 1 -+#define ATMEL_MPOP_INTMASK_YUV 0 -+#define ATMEL_MPOP_INTMASK_YUV_MASK 0x00000001 -+#define ATMEL_MPOP_INTMASK_YUV_OFFSET 0 -+#define ATMEL_MPOP_INTMASK_YUV_SIZE 1 -+#define ATMEL_MPOP_INTSTATUS 0x000000ac -+#define ATMEL_MPOP_INTSTATUS_EOP 3 -+#define ATMEL_MPOP_INTSTATUS_EOP_MASK 0x00000008 -+#define ATMEL_MPOP_INTSTATUS_EOP_OFFSET 3 -+#define ATMEL_MPOP_INTSTATUS_EOP_SIZE 1 -+#define ATMEL_MPOP_INTSTATUS_OUT 2 -+#define ATMEL_MPOP_INTSTATUS_OUT_MASK 0x00000004 -+#define ATMEL_MPOP_INTSTATUS_OUT_OFFSET 2 -+#define ATMEL_MPOP_INTSTATUS_OUT_SIZE 1 -+#define ATMEL_MPOP_INTSTATUS_OVERLAY 1 -+#define ATMEL_MPOP_INTSTATUS_OVERLAY_MASK 0x00000002 -+#define ATMEL_MPOP_INTSTATUS_OVERLAY_OFFSET 1 -+#define ATMEL_MPOP_INTSTATUS_OVERLAY_SIZE 1 -+#define ATMEL_MPOP_INTSTATUS_SOP 4 -+#define ATMEL_MPOP_INTSTATUS_SOP_MASK 0x00000010 -+#define ATMEL_MPOP_INTSTATUS_SOP_OFFSET 4 -+#define ATMEL_MPOP_INTSTATUS_SOP_SIZE 1 -+#define ATMEL_MPOP_INTSTATUS_YUV 0 -+#define ATMEL_MPOP_INTSTATUS_YUV_MASK 0x00000001 -+#define ATMEL_MPOP_INTSTATUS_YUV_OFFSET 0 -+#define ATMEL_MPOP_INTSTATUS_YUV_SIZE 1 -+#define ATMEL_MPOP_INVERT 25 -+#define ATMEL_MPOP_INVERT_MASK 0x02000000 -+#define ATMEL_MPOP_INVERT_OFFSET 25 -+#define ATMEL_MPOP_INVERT_SIZE 1 -+#define ATMEL_MPOP_MSTR_PTR 0x0000000c -+#define ATMEL_MPOP_MSTR_PTR_MASK 0xffffffff -+#define ATMEL_MPOP_MSTR_PTR_MSTR_PTR 0 -+#define ATMEL_MPOP_MSTR_PTR_MSTR_PTR_MASK 0xffffffff -+#define ATMEL_MPOP_MSTR_PTR_MSTR_PTR_OFFSET 0 -+#define ATMEL_MPOP_MSTR_PTR_MSTR_PTR_SIZE 32 -+#define ATMEL_MPOP_MSTR_PTR_OFFSET 0 -+#define ATMEL_MPOP_MSTR_PTR_SIZE 32 -+#define ATMEL_MPOP_O1EN 1 -+#define ATMEL_MPOP_O1EN_MASK 0x00000002 -+#define ATMEL_MPOP_O1EN_OFFSET 1 -+#define ATMEL_MPOP_O1EN_SIZE 1 -+#define ATMEL_MPOP_O1_POS 0x00000050 -+#define ATMEL_MPOP_O1_POS_O1_POS_X 11 -+#define ATMEL_MPOP_O1_POS_O1_POS_X_MASK 0x003ff800 -+#define ATMEL_MPOP_O1_POS_O1_POS_X_OFFSET 11 -+#define ATMEL_MPOP_O1_POS_O1_POS_X_SIZE 11 -+#define ATMEL_MPOP_O1_POS_O1_POS_Y 0 -+#define ATMEL_MPOP_O1_POS_O1_POS_Y_MASK 0x000007ff -+#define ATMEL_MPOP_O1_POS_O1_POS_Y_OFFSET 0 -+#define ATMEL_MPOP_O1_POS_O1_POS_Y_SIZE 11 -+#define ATMEL_MPOP_O1_POS_X 11 -+#define ATMEL_MPOP_O1_POS_X_MASK 0x003ff800 -+#define ATMEL_MPOP_O1_POS_X_OFFSET 11 -+#define ATMEL_MPOP_O1_POS_X_SIZE 11 -+#define ATMEL_MPOP_O1_POS_Y 0 -+#define ATMEL_MPOP_O1_POS_Y_MASK 0x000007ff -+#define ATMEL_MPOP_O1_POS_Y_OFFSET 0 -+#define ATMEL_MPOP_O1_POS_Y_SIZE 11 -+#define ATMEL_MPOP_O1_SAR 0x00000040 -+#define ATMEL_MPOP_O1_SAR_MASK 0xffffffff -+#define ATMEL_MPOP_O1_SAR_O1_SAR 0 -+#define ATMEL_MPOP_O1_SAR_O1_SAR_MASK 0xffffffff -+#define ATMEL_MPOP_O1_SAR_O1_SAR_OFFSET 0 -+#define ATMEL_MPOP_O1_SAR_O1_SAR_SIZE 32 -+#define ATMEL_MPOP_O1_SAR_OFFSET 0 -+#define ATMEL_MPOP_O1_SAR_SIZE 32 -+#define ATMEL_MPOP_O1_SIZE 0x00000064 -+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_X 11 -+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_X_MASK 0x003ff800 -+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_X_OFFSET 11 -+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_X_SIZE 11 -+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_Y 0 -+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_Y_MASK 0x000007ff -+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_Y_OFFSET 0 -+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_Y_SIZE 11 -+#define ATMEL_MPOP_O1_SIZE_X 11 -+#define ATMEL_MPOP_O1_SIZE_X_MASK 0x003ff800 -+#define ATMEL_MPOP_O1_SIZE_X_OFFSET 11 -+#define ATMEL_MPOP_O1_SIZE_X_SIZE 11 -+#define ATMEL_MPOP_O1_SIZE_Y 0 -+#define ATMEL_MPOP_O1_SIZE_Y_MASK 0x000007ff -+#define ATMEL_MPOP_O1_SIZE_Y_OFFSET 0 -+#define ATMEL_MPOP_O1_SIZE_Y_SIZE 11 -+#define ATMEL_MPOP_O1_WTC 0x00000074 -+#define ATMEL_MPOP_O1_WTC_MASK 0xffffffff -+#define ATMEL_MPOP_O1_WTC_O1_WTC 0 -+#define ATMEL_MPOP_O1_WTC_O1_WTC_MASK 0xffffffff -+#define ATMEL_MPOP_O1_WTC_O1_WTC_OFFSET 0 -+#define ATMEL_MPOP_O1_WTC_O1_WTC_SIZE 32 -+#define ATMEL_MPOP_O1_WTC_OFFSET 0 -+#define ATMEL_MPOP_O1_WTC_SIZE 32 -+#define ATMEL_MPOP_O2EN 2 -+#define ATMEL_MPOP_O2EN_MASK 0x00000004 -+#define ATMEL_MPOP_O2EN_OFFSET 2 -+#define ATMEL_MPOP_O2EN_SIZE 1 -+#define ATMEL_MPOP_O2_POS 0x00000054 -+#define ATMEL_MPOP_O2_POS_O2_POS_X 11 -+#define ATMEL_MPOP_O2_POS_O2_POS_X_MASK 0x003ff800 -+#define ATMEL_MPOP_O2_POS_O2_POS_X_OFFSET 11 -+#define ATMEL_MPOP_O2_POS_O2_POS_X_SIZE 11 -+#define ATMEL_MPOP_O2_POS_O2_POS_Y 0 -+#define ATMEL_MPOP_O2_POS_O2_POS_Y_MASK 0x000007ff -+#define ATMEL_MPOP_O2_POS_O2_POS_Y_OFFSET 0 -+#define ATMEL_MPOP_O2_POS_O2_POS_Y_SIZE 11 -+#define ATMEL_MPOP_O2_POS_X 11 -+#define ATMEL_MPOP_O2_POS_X_MASK 0x003ff800 -+#define ATMEL_MPOP_O2_POS_X_OFFSET 11 -+#define ATMEL_MPOP_O2_POS_X_SIZE 11 -+#define ATMEL_MPOP_O2_POS_Y 0 -+#define ATMEL_MPOP_O2_POS_Y_MASK 0x000007ff -+#define ATMEL_MPOP_O2_POS_Y_OFFSET 0 -+#define ATMEL_MPOP_O2_POS_Y_SIZE 11 -+#define ATMEL_MPOP_O2_SAR 0x00000044 -+#define ATMEL_MPOP_O2_SAR_MASK 0xffffffff -+#define ATMEL_MPOP_O2_SAR_O2_SAR 0 -+#define ATMEL_MPOP_O2_SAR_O2_SAR_MASK 0xffffffff -+#define ATMEL_MPOP_O2_SAR_O2_SAR_OFFSET 0 -+#define ATMEL_MPOP_O2_SAR_O2_SAR_SIZE 32 -+#define ATMEL_MPOP_O2_SAR_OFFSET 0 -+#define ATMEL_MPOP_O2_SAR_SIZE 32 -+#define ATMEL_MPOP_O2_SIZE 0x00000068 -+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_X 11 -+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_X_MASK 0x003ff800 -+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_X_OFFSET 11 -+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_X_SIZE 11 -+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_Y 0 -+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_Y_MASK 0x000007ff -+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_Y_OFFSET 0 -+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_Y_SIZE 11 -+#define ATMEL_MPOP_O2_SIZE_X 11 -+#define ATMEL_MPOP_O2_SIZE_X_MASK 0x003ff800 -+#define ATMEL_MPOP_O2_SIZE_X_OFFSET 11 -+#define ATMEL_MPOP_O2_SIZE_X_SIZE 11 -+#define ATMEL_MPOP_O2_SIZE_Y 0 -+#define ATMEL_MPOP_O2_SIZE_Y_MASK 0x000007ff -+#define ATMEL_MPOP_O2_SIZE_Y_OFFSET 0 -+#define ATMEL_MPOP_O2_SIZE_Y_SIZE 11 -+#define ATMEL_MPOP_O2_WTC 0x00000078 -+#define ATMEL_MPOP_O2_WTC_MASK 0xffffffff -+#define ATMEL_MPOP_O2_WTC_O2_WTC 0 -+#define ATMEL_MPOP_O2_WTC_O2_WTC_MASK 0xffffffff -+#define ATMEL_MPOP_O2_WTC_O2_WTC_OFFSET 0 -+#define ATMEL_MPOP_O2_WTC_O2_WTC_SIZE 32 -+#define ATMEL_MPOP_O2_WTC_OFFSET 0 -+#define ATMEL_MPOP_O2_WTC_SIZE 32 -+#define ATMEL_MPOP_OCR 0x00000008 -+#define ATMEL_MPOP_OCR_BGR 6 -+#define ATMEL_MPOP_OCR_BGR_MASK 0x00000040 -+#define ATMEL_MPOP_OCR_BGR_OFFSET 6 -+#define ATMEL_MPOP_OCR_BGR_SIZE 1 -+#define ATMEL_MPOP_OCR_CURSOREN 0 -+#define ATMEL_MPOP_OCR_CURSOREN_MASK 0x00000001 -+#define ATMEL_MPOP_OCR_CURSOREN_OFFSET 0 -+#define ATMEL_MPOP_OCR_CURSOREN_SIZE 1 -+#define ATMEL_MPOP_OCR_O1EN 1 -+#define ATMEL_MPOP_OCR_O1EN_MASK 0x00000002 -+#define ATMEL_MPOP_OCR_O1EN_OFFSET 1 -+#define ATMEL_MPOP_OCR_O1EN_SIZE 1 -+#define ATMEL_MPOP_OCR_O2EN 2 -+#define ATMEL_MPOP_OCR_O2EN_MASK 0x00000004 -+#define ATMEL_MPOP_OCR_O2EN_OFFSET 2 -+#define ATMEL_MPOP_OCR_O2EN_SIZE 1 -+#define ATMEL_MPOP_OCR_RGBEN 3 -+#define ATMEL_MPOP_OCR_RGBEN_MASK 0x00000008 -+#define ATMEL_MPOP_OCR_RGBEN_OFFSET 3 -+#define ATMEL_MPOP_OCR_RGBEN_SIZE 1 -+#define ATMEL_MPOP_OCR_RGBFORM 5 -+#define ATMEL_MPOP_OCR_RGBFORM_MASK 0x00000020 -+#define ATMEL_MPOP_OCR_RGBFORM_OFFSET 5 -+#define ATMEL_MPOP_OCR_RGBFORM_SIZE 1 -+#define ATMEL_MPOP_OCR_RGBSRC 4 -+#define ATMEL_MPOP_OCR_RGBSRC_MASK 0x00000010 -+#define ATMEL_MPOP_OCR_RGBSRC_OFFSET 4 -+#define ATMEL_MPOP_OCR_RGBSRC_SIZE 1 -+#define ATMEL_MPOP_OUT 2 -+#define ATMEL_MPOP_OUT_BEAR 0x0000009c -+#define ATMEL_MPOP_OUT_BEAR_MASK 0xffffffff -+#define ATMEL_MPOP_OUT_BEAR_OFFSET 0 -+#define ATMEL_MPOP_OUT_BEAR_OUT_BEAR 0 -+#define ATMEL_MPOP_OUT_BEAR_OUT_BEAR_MASK 0xffffffff -+#define ATMEL_MPOP_OUT_BEAR_OUT_BEAR_OFFSET 0 -+#define ATMEL_MPOP_OUT_BEAR_OUT_BEAR_SIZE 32 -+#define ATMEL_MPOP_OUT_BEAR_SIZE 32 -+#define ATMEL_MPOP_OUT_BGR 3 -+#define ATMEL_MPOP_OUT_BGR_MASK 0x00000008 -+#define ATMEL_MPOP_OUT_BGR_OFFSET 3 -+#define ATMEL_MPOP_OUT_BGR_SIZE 1 -+#define ATMEL_MPOP_OUT_CTRL 2 -+#define ATMEL_MPOP_OUT_CTRL_MASK 0x00000004 -+#define ATMEL_MPOP_OUT_CTRL_OFFSET 2 -+#define ATMEL_MPOP_OUT_CTRL_SIZE 1 -+#define ATMEL_MPOP_OUT_MASK 0x00000004 -+#define ATMEL_MPOP_OUT_OFFSET 2 -+#define ATMEL_MPOP_OUT_SIZE 1 -+#define ATMEL_MPOP_OVERLAY 1 -+#define ATMEL_MPOP_OVERLAY_BEAR 0x00000098 -+#define ATMEL_MPOP_OVERLAY_BEAR_MASK 0xffffffff -+#define ATMEL_MPOP_OVERLAY_BEAR_OFFSET 0 -+#define ATMEL_MPOP_OVERLAY_BEAR_OVERLAY_BEAR 0 -+#define ATMEL_MPOP_OVERLAY_BEAR_OVERLAY_BEAR_MASK 0xffffffff -+#define ATMEL_MPOP_OVERLAY_BEAR_OVERLAY_BEAR_OFFSET 0 -+#define ATMEL_MPOP_OVERLAY_BEAR_OVERLAY_BEAR_SIZE 32 -+#define ATMEL_MPOP_OVERLAY_BEAR_SIZE 32 -+#define ATMEL_MPOP_OVERLAY_MASK 0x00000002 -+#define ATMEL_MPOP_OVERLAY_OFFSET 1 -+#define ATMEL_MPOP_OVERLAY_SIZE 1 -+#define ATMEL_MPOP_PALETTEDATA 0x00000400 -+#define ATMEL_MPOP_R 16 -+#define ATMEL_MPOP_R1 0 -+#define ATMEL_MPOP_R1_MASK 0x00000fff -+#define ATMEL_MPOP_R1_OFFSET 0 -+#define ATMEL_MPOP_R1_SIZE 12 -+#define ATMEL_MPOP_R2 12 -+#define ATMEL_MPOP_R2R1 0x00000014 -+#define ATMEL_MPOP_R2R1_R1 0 -+#define ATMEL_MPOP_R2R1_R1_MASK 0x00000fff -+#define ATMEL_MPOP_R2R1_R1_OFFSET 0 -+#define ATMEL_MPOP_R2R1_R1_SIZE 12 -+#define ATMEL_MPOP_R2R1_R2 12 -+#define ATMEL_MPOP_R2R1_R2_MASK 0x00fff000 -+#define ATMEL_MPOP_R2R1_R2_OFFSET 12 -+#define ATMEL_MPOP_R2R1_R2_SIZE 12 -+#define ATMEL_MPOP_R2_MASK 0x00fff000 -+#define ATMEL_MPOP_R2_OFFSET 12 -+#define ATMEL_MPOP_R2_SIZE 12 -+#define ATMEL_MPOP_R3 0 -+#define ATMEL_MPOP_R3_MASK 0x00000fff -+#define ATMEL_MPOP_R3_OFFSET 0 -+#define ATMEL_MPOP_R3_SIZE 12 -+#define ATMEL_MPOP_R4 12 -+#define ATMEL_MPOP_R4R3 0x00000018 -+#define ATMEL_MPOP_R4R3_R3 0 -+#define ATMEL_MPOP_R4R3_R3_MASK 0x00000fff -+#define ATMEL_MPOP_R4R3_R3_OFFSET 0 -+#define ATMEL_MPOP_R4R3_R3_SIZE 12 -+#define ATMEL_MPOP_R4R3_R4 12 -+#define ATMEL_MPOP_R4R3_R4_MASK 0xfffff000 -+#define ATMEL_MPOP_R4R3_R4_OFFSET 12 -+#define ATMEL_MPOP_R4R3_R4_SIZE 20 -+#define ATMEL_MPOP_R4_MASK 0xfffff000 -+#define ATMEL_MPOP_R4_OFFSET 12 -+#define ATMEL_MPOP_R4_SIZE 20 -+#define ATMEL_MPOP_RGBEN 3 -+#define ATMEL_MPOP_RGBEN_MASK 0x00000008 -+#define ATMEL_MPOP_RGBEN_OFFSET 3 -+#define ATMEL_MPOP_RGBEN_SIZE 1 -+#define ATMEL_MPOP_RGBFORM 5 -+#define ATMEL_MPOP_RGBFORM_MASK 0x00000020 -+#define ATMEL_MPOP_RGBFORM_OFFSET 5 -+#define ATMEL_MPOP_RGBFORM_SIZE 1 -+#define ATMEL_MPOP_RGBSRC 4 -+#define ATMEL_MPOP_RGBSRC_MASK 0x00000010 -+#define ATMEL_MPOP_RGBSRC_OFFSET 4 -+#define ATMEL_MPOP_RGBSRC_SIZE 1 -+#define ATMEL_MPOP_RGB_POS 0x0000004c -+#define ATMEL_MPOP_RGB_POS_RGB_POS_X 11 -+#define ATMEL_MPOP_RGB_POS_RGB_POS_X_MASK 0x003ff800 -+#define ATMEL_MPOP_RGB_POS_RGB_POS_X_OFFSET 11 -+#define ATMEL_MPOP_RGB_POS_RGB_POS_X_SIZE 11 -+#define ATMEL_MPOP_RGB_POS_RGB_POS_Y 0 -+#define ATMEL_MPOP_RGB_POS_RGB_POS_Y_MASK 0x000007ff -+#define ATMEL_MPOP_RGB_POS_RGB_POS_Y_OFFSET 0 -+#define ATMEL_MPOP_RGB_POS_RGB_POS_Y_SIZE 11 -+#define ATMEL_MPOP_RGB_POS_X 11 -+#define ATMEL_MPOP_RGB_POS_X_MASK 0x003ff800 -+#define ATMEL_MPOP_RGB_POS_X_OFFSET 11 -+#define ATMEL_MPOP_RGB_POS_X_SIZE 11 -+#define ATMEL_MPOP_RGB_POS_Y 0 -+#define ATMEL_MPOP_RGB_POS_Y_MASK 0x000007ff -+#define ATMEL_MPOP_RGB_POS_Y_OFFSET 0 -+#define ATMEL_MPOP_RGB_POS_Y_SIZE 11 -+#define ATMEL_MPOP_RGB_SAR 0x0000003c -+#define ATMEL_MPOP_RGB_SAR_MASK 0xffffffff -+#define ATMEL_MPOP_RGB_SAR_OFFSET 0 -+#define ATMEL_MPOP_RGB_SAR_RGB_SAR 0 -+#define ATMEL_MPOP_RGB_SAR_RGB_SAR_MASK 0xffffffff -+#define ATMEL_MPOP_RGB_SAR_RGB_SAR_OFFSET 0 -+#define ATMEL_MPOP_RGB_SAR_RGB_SAR_SIZE 32 -+#define ATMEL_MPOP_RGB_SAR_SIZE 32 -+#define ATMEL_MPOP_RGB_SIZE 0x00000060 -+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_X 11 -+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_X_MASK 0x003ff800 -+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_X_OFFSET 11 -+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_X_SIZE 11 -+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_Y 0 -+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_Y_MASK 0x000007ff -+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_Y_OFFSET 0 -+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_Y_SIZE 11 -+#define ATMEL_MPOP_RGB_SIZE_X 11 -+#define ATMEL_MPOP_RGB_SIZE_X_MASK 0x003ff800 -+#define ATMEL_MPOP_RGB_SIZE_X_OFFSET 11 -+#define ATMEL_MPOP_RGB_SIZE_X_SIZE 11 -+#define ATMEL_MPOP_RGB_SIZE_Y 0 -+#define ATMEL_MPOP_RGB_SIZE_Y_MASK 0x000007ff -+#define ATMEL_MPOP_RGB_SIZE_Y_OFFSET 0 -+#define ATMEL_MPOP_RGB_SIZE_Y_SIZE 11 -+#define ATMEL_MPOP_RGB_WTC 0x00000070 -+#define ATMEL_MPOP_RGB_WTC_MASK 0xffffffff -+#define ATMEL_MPOP_RGB_WTC_OFFSET 0 -+#define ATMEL_MPOP_RGB_WTC_RGB_WTC 0 -+#define ATMEL_MPOP_RGB_WTC_RGB_WTC_MASK 0xffffffff -+#define ATMEL_MPOP_RGB_WTC_RGB_WTC_OFFSET 0 -+#define ATMEL_MPOP_RGB_WTC_RGB_WTC_SIZE 32 -+#define ATMEL_MPOP_RGB_WTC_SIZE 32 -+#define ATMEL_MPOP_R_MASK 0x00ff0000 -+#define ATMEL_MPOP_R_OFFSET 16 -+#define ATMEL_MPOP_R_SIZE 8 -+#define ATMEL_MPOP_SOP 4 -+#define ATMEL_MPOP_SOP_MASK 0x00000010 -+#define ATMEL_MPOP_SOP_OFFSET 4 -+#define ATMEL_MPOP_SOP_SIZE 1 -+#define ATMEL_MPOP_START 1 -+#define ATMEL_MPOP_START_MASK 0x00000002 -+#define ATMEL_MPOP_START_OFFSET 1 -+#define ATMEL_MPOP_START_SIZE 1 -+#define ATMEL_MPOP_STRIDE 0x0000002c -+#define ATMEL_MPOP_STRIDE_MASK 0xffffffff -+#define ATMEL_MPOP_STRIDE_OFFSET 0 -+#define ATMEL_MPOP_STRIDE_SIZE 32 -+#define ATMEL_MPOP_STRIDE_STRIDE 0 -+#define ATMEL_MPOP_STRIDE_STRIDE_MASK 0xffffffff -+#define ATMEL_MPOP_STRIDE_STRIDE_OFFSET 0 -+#define ATMEL_MPOP_STRIDE_STRIDE_SIZE 32 -+#define ATMEL_MPOP_U_SAR 0x00000034 -+#define ATMEL_MPOP_U_SAR_MASK 0xffffffff -+#define ATMEL_MPOP_U_SAR_OFFSET 0 -+#define ATMEL_MPOP_U_SAR_SIZE 32 -+#define ATMEL_MPOP_U_SAR_U_SAR 0 -+#define ATMEL_MPOP_U_SAR_U_SAR_MASK 0xffffffff -+#define ATMEL_MPOP_U_SAR_U_SAR_OFFSET 0 -+#define ATMEL_MPOP_U_SAR_U_SAR_SIZE 32 -+#define ATMEL_MPOP_VISIBLE 24 -+#define ATMEL_MPOP_VISIBLE_MASK 0x01000000 -+#define ATMEL_MPOP_VISIBLE_OFFSET 24 -+#define ATMEL_MPOP_VISIBLE_SIZE 1 -+#define ATMEL_MPOP_V_SAR 0x00000038 -+#define ATMEL_MPOP_V_SAR_MASK 0xffffffff -+#define ATMEL_MPOP_V_SAR_OFFSET 0 -+#define ATMEL_MPOP_V_SAR_SIZE 32 -+#define ATMEL_MPOP_V_SAR_V_SAR 0 -+#define ATMEL_MPOP_V_SAR_V_SAR_MASK 0xffffffff -+#define ATMEL_MPOP_V_SAR_V_SAR_OFFSET 0 -+#define ATMEL_MPOP_V_SAR_V_SAR_SIZE 32 -+#define ATMEL_MPOP_XRESIZE 16 -+#define ATMEL_MPOP_XRESIZE_MASK 0x00ff0000 -+#define ATMEL_MPOP_XRESIZE_OFFSET 16 -+#define ATMEL_MPOP_XRESIZE_SIZE 8 -+#define ATMEL_MPOP_YCR 0x00000004 -+#define ATMEL_MPOP_YCR_XRESIZE 16 -+#define ATMEL_MPOP_YCR_XRESIZE_MASK 0x00ff0000 -+#define ATMEL_MPOP_YCR_XRESIZE_OFFSET 16 -+#define ATMEL_MPOP_YCR_XRESIZE_SIZE 8 -+#define ATMEL_MPOP_YCR_YRESIZE 8 -+#define ATMEL_MPOP_YCR_YRESIZE_MASK 0x0000ff00 -+#define ATMEL_MPOP_YCR_YRESIZE_OFFSET 8 -+#define ATMEL_MPOP_YCR_YRESIZE_SIZE 8 -+#define ATMEL_MPOP_YCR_YUVFORMAT 0 -+#define ATMEL_MPOP_YCR_YUVFORMAT_MASK 0x00000003 -+#define ATMEL_MPOP_YCR_YUVFORMAT_OFFSET 0 -+#define ATMEL_MPOP_YCR_YUVFORMAT_SIZE 2 -+#define ATMEL_MPOP_YCR_YUVFORMAT_YUVFORMAT_420 0x00000002 -+#define ATMEL_MPOP_YCR_YUVFORMAT_YUVFORMAT_422 0x00000001 -+#define ATMEL_MPOP_YCR_YUVFORMAT_YUVFORMAT_444 0x00000000 -+#define ATMEL_MPOP_YRESIZE 8 -+#define ATMEL_MPOP_YRESIZE_MASK 0x0000ff00 -+#define ATMEL_MPOP_YRESIZE_OFFSET 8 -+#define ATMEL_MPOP_YRESIZE_SIZE 8 -+#define ATMEL_MPOP_YUV 0 -+#define ATMEL_MPOP_YUVFORMAT 0 -+#define ATMEL_MPOP_YUVFORMAT_420 0x00000002 -+#define ATMEL_MPOP_YUVFORMAT_422 0x00000001 -+#define ATMEL_MPOP_YUVFORMAT_444 0x00000000 -+#define ATMEL_MPOP_YUVFORMAT_MASK 0x00000003 -+#define ATMEL_MPOP_YUVFORMAT_OFFSET 0 -+#define ATMEL_MPOP_YUVFORMAT_SIZE 2 -+#define ATMEL_MPOP_YUVFORMAT_YUVFORMAT_420 0x00000002 -+#define ATMEL_MPOP_YUVFORMAT_YUVFORMAT_422 0x00000001 -+#define ATMEL_MPOP_YUVFORMAT_YUVFORMAT_444 0x00000000 -+#define ATMEL_MPOP_YUV_BEAR 0x00000094 -+#define ATMEL_MPOP_YUV_BEAR_MASK 0xffffffff -+#define ATMEL_MPOP_YUV_BEAR_OFFSET 0 -+#define ATMEL_MPOP_YUV_BEAR_SIZE 32 -+#define ATMEL_MPOP_YUV_BEAR_YUV_BEAR 0 -+#define ATMEL_MPOP_YUV_BEAR_YUV_BEAR_MASK 0xffffffff -+#define ATMEL_MPOP_YUV_BEAR_YUV_BEAR_OFFSET 0 -+#define ATMEL_MPOP_YUV_BEAR_YUV_BEAR_SIZE 32 -+#define ATMEL_MPOP_YUV_MASK 0x00000001 -+#define ATMEL_MPOP_YUV_MAX_COORD 0x0000005c -+#define ATMEL_MPOP_YUV_MAX_COORD_X 11 -+#define ATMEL_MPOP_YUV_MAX_COORD_X_MASK 0x003ff800 -+#define ATMEL_MPOP_YUV_MAX_COORD_X_OFFSET 11 -+#define ATMEL_MPOP_YUV_MAX_COORD_X_SIZE 11 -+#define ATMEL_MPOP_YUV_MAX_COORD_Y 0 -+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_X 11 -+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_X_MASK 0x003ff800 -+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_X_OFFSET 11 -+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_X_SIZE 11 -+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_Y 0 -+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_Y_MASK 0x000007ff -+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_Y_OFFSET 0 -+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_Y_SIZE 11 -+#define ATMEL_MPOP_YUV_MAX_COORD_Y_MASK 0x000007ff -+#define ATMEL_MPOP_YUV_MAX_COORD_Y_OFFSET 0 -+#define ATMEL_MPOP_YUV_MAX_COORD_Y_SIZE 11 -+#define ATMEL_MPOP_YUV_OFFSET 0 -+#define ATMEL_MPOP_YUV_SIZE 1 -+#define ATMEL_MPOP_Y_SAR 0x00000030 -+#define ATMEL_MPOP_Y_SAR_MASK 0xffffffff -+#define ATMEL_MPOP_Y_SAR_OFFSET 0 -+#define ATMEL_MPOP_Y_SAR_SIZE 32 -+#define ATMEL_MPOP_Y_SAR_Y_SAR 0 -+#define ATMEL_MPOP_Y_SAR_Y_SAR_MASK 0xffffffff -+#define ATMEL_MPOP_Y_SAR_Y_SAR_OFFSET 0 -+#define ATMEL_MPOP_Y_SAR_Y_SAR_SIZE 32 -+ -+#endif /* __ATMEL_MPOP_H__ */ -diff --git a/localversion-atmel b/localversion-atmel -new file mode 100644 -index 0000000..b90deba ---- /dev/null -+++ b/localversion-atmel -@@ -0,0 +1 @@ -+.atmel.1 |