summaryrefslogtreecommitdiff
path: root/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.2.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/device/Atmel/at91bootstrap/at91bootstrap-2.3.2.patch')
-rw-r--r--target/device/Atmel/at91bootstrap/at91bootstrap-2.3.2.patch506
1 files changed, 0 insertions, 506 deletions
diff --git a/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.2.patch b/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.2.patch
deleted file mode 100644
index 7b7bae18f..000000000
--- a/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.2.patch
+++ /dev/null
@@ -1,506 +0,0 @@
-diff -urN at91bootstrap-2.3/board/at91sam9260ek/at91sam9260ek.c at91bootstrap-2.3.2/board/at91sam9260ek/at91sam9260ek.c
---- at91bootstrap-2.3/board/at91sam9260ek/at91sam9260ek.c 2007-03-28 16:05:09.000000000 +0200
-+++ at91bootstrap-2.3.2/board/at91sam9260ek/at91sam9260ek.c 2007-08-14 23:20:24.000000000 +0200
-@@ -47,7 +47,9 @@
- #ifdef CFG_DATAFLASH
- #include "../../include/dataflash.h"
- #endif
--
-+#ifdef CFG_FLASH
-+#include "../../include/flash.h"
-+#endif
- static inline unsigned int get_cp15(void)
- {
- unsigned int value;
-@@ -129,6 +131,10 @@
- (MASTER_CLOCK * 7)/1000000); /* Refresh Timer Register */
-
- #endif /* CFG_SDRAM */
-+
-+#ifdef CFG_FLASH
-+ flash_hw_init();
-+#endif
- }
- #endif /* CFG_HW_INIT */
-
-@@ -221,7 +227,24 @@
- }
- #endif /* CFG_DATAFLASH */
-
-+#ifdef CFG_FLASH
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn flash_hw_init */
-+/* \brief This function performs Flash HW initialization */
-+/*------------------------------------------------------------------------------*/
-+void flash_hw_init(void)
-+{
-+ /* Configure PIOs */
-+ const struct pio_desc flash_pio[] = {
-+ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+ };
-+
-+ /* Configure the PIO controller */
-+ pio_setup(flash_pio);
-+}
-
-+#endif /* CFG_FLASH */
-
- #ifdef CFG_NANDFLASH
- /*------------------------------------------------------------------------------*/
-diff -urN at91bootstrap-2.3/board/at91sam9260ek/flash/at91sam9260ek.h at91bootstrap-2.3.2/board/at91sam9260ek/flash/at91sam9260ek.h
---- at91bootstrap-2.3/board/at91sam9260ek/flash/at91sam9260ek.h 1970-01-01 01:00:00.000000000 +0100
-+++ at91bootstrap-2.3.2/board/at91sam9260ek/flash/at91sam9260ek.h 2007-08-14 22:53:58.000000000 +0200
-@@ -0,0 +1,88 @@
-+/* ----------------------------------------------------------------------------
-+ * ATMEL Microcontroller Software Support - ROUSSET -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2006, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaiimer below.
-+ *
-+ * - Redistributions in binary form must reproduce the above copyright notice,
-+ * this list of conditions and the disclaimer below in the documentation and/or
-+ * other materials provided with the distribution.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name : at91sam9260ek.h
-+ * Object :
-+ * Creation : NLe Jul 13th 2006
-+ *-----------------------------------------------------------------------------
-+ */
-+#ifndef _AT91SAM9260EK_H
-+#define _AT91SAM9260EK_H
-+/* ******************************************************************* */
-+/* PMC Settings */
-+/* */
-+/* The main oscillator is enabled as soon as possible in the c_startup */
-+/* and MCK is switched on the main oscillator. */
-+/* PLL initialization is done later in the hw_init() function */
-+/* ******************************************************************* */
-+#define MASTER_CLOCK (198656000/2)
-+
-+#define PLL_LOCK_TIMEOUT 1000000
-+
-+#define PLLA_SETTINGS 0x2060BF09
-+#define PLLB_SETTINGS 0x10483F0E
-+
-+/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
-+#define MCKR_SETTINGS (AT91C_PMC_CSS_PLLA_CLK | AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
-+
-+/* Flash settings - Use a default, which hopefully works for all AT91 chips */
-+#include "smc0_setup.h"
-+
-+
-+/* ******************************************************************* */
-+/* BootStrap Settings */
-+/* */
-+/* ******************************************************************* */
-+#define MACH_TYPE 0x44B /* AT91SAM9260-EK */
-+
-+#define IMG_ADDRESS 0x8000 /* Image Address in Flash */
-+
-+#if defined(IMG_SIZE)
-+#warning "IMG_SIZE redefined"
-+#else
-+#define IMG_SIZE 0x38000 /* Image Size in Flash */
-+#endif
-+
-+#if defined(JUMP_ADDR)
-+#warning "JUMP_ADDR redefined"
-+#else
-+#define JUMP_ADDR 0x23F00000 /* Final Jump Address */
-+#endif
-+
-+/* ******************************************************************* */
-+/* Application Settings */
-+/* ******************************************************************* */
-+#define CFG_DEBUG
-+#define CFG_FLASH
-+#define CFG_SDRAM
-+#define CFG_HW_INIT
-+
-+#endif /* _AT91SAM9260EK_H */
-diff -urN at91bootstrap-2.3/crt0_gnu.S at91bootstrap-2.3.2/crt0_gnu.S
---- at91bootstrap-2.3/crt0_gnu.S 2006-12-05 11:27:24.000000000 +0100
-+++ at91bootstrap-2.3.2/crt0_gnu.S 2007-08-14 23:23:49.000000000 +0200
-@@ -84,6 +84,13 @@
- _init_stack:
- ldr sp,=TOP_OF_MEM
-
-+/* Initialize the SMC BEFORE we change the clock */
-+#ifdef CFG_FLASH
-+ ldr r4, = smc0_hw_init
-+ mov lr, pc
-+ bx r4
-+#endif
-+
- /* Test if main oscillator is enabled */
- ldr r0,=AT91C_PMC_SR
- ldr r1, [r0]
-diff -urN at91bootstrap-2.3/driver/driver.mk at91bootstrap-2.3.2/driver/driver.mk
---- at91bootstrap-2.3/driver/driver.mk 2007-03-25 16:24:08.000000000 +0200
-+++ at91bootstrap-2.3.2/driver/driver.mk 2007-08-14 21:17:53.000000000 +0200
-@@ -1,10 +1,11 @@
- # Makefile for AT91-Bootstrap drivers directory
-
--COBJS-y += driver/debug.o
--COBJS-y += driver/gpio.o
--COBJS-y += driver/pmc.o
--COBJS-y += driver/sdramc.o
--COBJS-y += driver/string.o
--COBJS-y += driver/udiv.o
--COBJS-$(CONFIG_NANDFLASH) += driver/nandflash.o
--COBJS-$(CONFIG_DATAFLASH) += driver/dataflash.o
-+COBJS-y += driver/debug.o
-+COBJS-y += driver/gpio.o
-+COBJS-y += driver/pmc.o
-+COBJS-y += driver/sdramc.o
-+COBJS-y += driver/string.o
-+COBJS-y += driver/udiv.o
-+COBJS-$(CONFIG_NANDFLASH) += driver/nandflash.o
-+COBJS-$(CONFIG_DATAFLASH) += driver/dataflash.o
-+COBJS-$(CONFIG_FLASH) += driver/flash.o
-diff -urN at91bootstrap-2.3/driver/flash.c at91bootstrap-2.3.2/driver/flash.c
---- at91bootstrap-2.3/driver/flash.c 1970-01-01 01:00:00.000000000 +0100
-+++ at91bootstrap-2.3.2/driver/flash.c 2007-08-14 23:20:29.000000000 +0200
-@@ -0,0 +1,132 @@
-+/* ----------------------------------------------------------------------------
-+ * ATMEL Microcontroller Software Support - ROUSSET -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2007, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaiimer below.
-+ *
-+ * - Redistributions in binary form must reproduce the above copyright notice,
-+ * this list of conditions and the disclaimer below in the documentation and/or
-+ * other materials provided with the distribution.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name : flash.c
-+ * Object : Flash High level functions
-+ * Creation : USa Aug 14th 2007
-+ *---------------------------------------------------------------------------
-+*/
-+
-+#include "../include/part.h"
-+#include "../include/main.h"
-+#include "../include/flash.h"
-+#include "../include/smc.h"
-+#include <stdlib.h>
-+
-+#ifdef CFG_FLASH
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn smc0_hw_init */
-+/* \brief This function performs Static Memory Controller HW initialization */
-+/* It should be executed BEFORE the slow clock is changed */
-+/* WARNING: The C_Startup has done VERY LITTLE at this point */
-+/*------------------------------------------------------------------------------*/
-+void smc0_hw_init(void)
-+{
-+ /* The SMC is either clocked by the Slow clock or by MCLK
-+ * MCLK is typically 100 MHz
-+ */
-+
-+unsigned int setup0,pulse0,cycle0,mode0;
-+
-+ writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) |DATABUS_PULLUP_ON|MEMORY_VOLTAGE_3_3V , AT91C_BASE_CCFG + CCFG_EBICSA);
-+
-+ /* Check : SETUP + PULSE <= CYCLE ! */
-+
-+ setup0 =
-+ ((NCS_READ_SETUP & 0x3F) << 24) | // (128 * bit[5]) + bit[4:0]
-+ ((NRD_SETUP & 0x3F) << 16) | // (128 * bit[5]) + bit[4:0]
-+ ((NCS_WR_SETUP & 0x3F) << 8) | // (128 * bit[5]) + bit[4:0]
-+ ((NWE_SETUP & 0x3F) << 0); // (128 * bit[5]) + bit[4:0]
-+ writel(setup0, AT91C_BASE_SMC + SMC_SETUP0);
-+
-+ pulse0 =
-+ ((NCS_READ_PULSE & 0x3F) << 24) | // (128 * bit[5]) + bit[4:0]
-+ ((NRD_PULSE & 0x3F) << 16) | // (128 * bit[5]) + bit[4:0]
-+ ((NCS_WR_PULSE & 0x3F) << 8) | // (128 * bit[5]) + bit[4:0]
-+ ((NWE_PULSE & 0x3F) << 0); // (128 * bit[5]) + bit[4:0]
-+ writel(pulse0, AT91C_BASE_SMC + SMC_PULSE0);
-+
-+ cycle0 =
-+ ((NRD_CYCLE & 0x1FF) << 16) | // (256 * bit[8:7]) + bit[6:0]
-+ ((NWE_CYCLE & 0x1FF) << 0); // (256 * bit[8:7]) + bit[6:0]
-+ writel(cycle0, AT91C_BASE_SMC + SMC_CYCLE0);
-+
-+ mode0 = (PS|PMEN|TDF_MODE|TDF_CYCLES|DBW|BAT|EXNW_MODE|WRITE_MODE|READ_MODE);
-+ writel(mode0, AT91C_BASE_SMC + SMC_CTRL0);
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn flash_is_boot_valid */
-+/* \brief Check that the first bytes of the buffer are valid ARM vectors */
-+/*------------------------------------------------------------------------------*/
-+static unsigned int flash_is_boot_valid(unsigned char *buffer)
-+{
-+ int i = 3;
-+
-+ /* Verify if the 28 first bytes of the sram correspond to ARM vectors
-+ The sixth ARM vector contain the size of the code */
-+ while(i < 28)
-+ {
-+ if (i != 23)
-+ {
-+ if ((buffer[i] != 0xEA) && (buffer[i] != 0xE5) )
-+ return -1;
-+ }
-+ i+=4;
-+ }
-+
-+ return 0;
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn load_flash */
-+/* \brief This function loads flash content to specified address */
-+/*------------------------------------------------------------------------------*/
-+int load_flash(unsigned int img_addr, unsigned int img_size, unsigned int img_dest)
-+{
-+ unsigned char *src, *dst;
-+ src = (unsigned char *) img_addr;
-+ dst = (unsigned char *) img_dest;
-+
-+ flash_hw_init();
-+
-+ if (flash_is_boot_valid((unsigned char*)img_addr))
-+ return -1;
-+
-+ while (img_size > 0) {
-+ *dst++ = *src++;
-+ img_size--;
-+ }
-+ return 0;
-+}
-+
-+#endif /* CFG_FLASH */
-diff -urN at91bootstrap-2.3/include/AT91SAM9260_inc.h at91bootstrap-2.3.2/include/AT91SAM9260_inc.h
---- at91bootstrap-2.3/include/AT91SAM9260_inc.h 2006-12-05 11:27:20.000000000 +0100
-+++ at91bootstrap-2.3.2/include/AT91SAM9260_inc.h 2007-08-14 23:05:19.000000000 +0200
-@@ -463,7 +463,7 @@
- #define AT91C_EBI_CS5A_SMC (0x0 << 5) // (CCFG) Chip Select 5 is only assigned to the Static Memory Controller and NCS5 behaves as defined by the SMC
- #define AT91C_EBI_CS5A_CF (0x1 << 5) // (CCFG) Chip Select 5 is assigned to the Static Memory Controller and the CompactFlash Logic (second slot) is activated.
- #define AT91C_EBI_DBPUC (0x1 << 8) // (CCFG) Data Bus Pull-up Configuration
--
-+#define AT91C_EBI_VDDIOMSEL (0x1 << 16)
- // *****************************************************************************
- // SOFTWARE API DEFINITION FOR Peripheral DMA Controller
- // *****************************************************************************
-diff -urN at91bootstrap-2.3/include/flash.h at91bootstrap-2.3.2/include/flash.h
---- at91bootstrap-2.3/include/flash.h 1970-01-01 01:00:00.000000000 +0100
-+++ at91bootstrap-2.3.2/include/flash.h 2007-08-14 23:20:11.000000000 +0200
-@@ -0,0 +1,41 @@
-+/* ----------------------------------------------------------------------------
-+ * ATMEL Microcontroller Software Support - ROUSSET -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2007, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaiimer below.
-+ *
-+ * - Redistributions in binary form must reproduce the above copyright notice,
-+ * this list of conditions and the disclaimer below in the documentation and/or
-+ * other materials provided with the distribution.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name : flash.h
-+ * Object : ATMEL Flash Header File
-+ * Creation : USa Aug 14th 2007
-+ *---------------------------------------------------------------------------
-+*/
-+#ifndef _FLASH_H
-+#define _FLASH_H
-+extern void flash_hw_init(void);
-+extern int load_flash(unsigned int img_addr, unsigned int img_size, unsigned int img_dest);
-+#endif
-diff -urN at91bootstrap-2.3/include/smc0_setup.h at91bootstrap-2.3.2/include/smc0_setup.h
---- at91bootstrap-2.3/include/smc0_setup.h 1970-01-01 01:00:00.000000000 +0100
-+++ at91bootstrap-2.3.2/include/smc0_setup.h 2007-08-14 22:54:21.000000000 +0200
-@@ -0,0 +1,32 @@
-+/* ******************************************************************* */
-+/* SMC0 Settings */
-+/* We use this as a default for all */
-+/* ******************************************************************* */
-+
-+#ifndef _SMC0_SETUP_H
-+#define _SMC0_SETUP_H
-+
-+#define NCS_READ_SETUP _ns(10)
-+#define NRD_SETUP _ns(20)
-+#define NCS_WR_SETUP _ns(10)
-+#define NWE_SETUP _ns(20)
-+
-+#define NCS_READ_PULSE _ns(100)
-+#define NRD_PULSE _ns(100)
-+#define NCS_WR_PULSE _ns(100)
-+#define NWE_PULSE _ns(100)
-+
-+#define NRD_CYCLE _ns(140)
-+#define NWE_CYCLE _ns(140)
-+
-+#define PS AT91C_SMC_PS_SIZE_SIXTEEN_BYTES
-+#define PMEN PAGE_MODE_OFF
-+#define TDF_MODE TDF_OPTIMIZATION_OFF
-+#define TDF_CYCLES _ns(60)
-+#define DBW AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS
-+#define BAT AT91C_SMC_BAT_BYTE_SELECT
-+#define EXNW_MODE AT91C_SMC_NWAITM_NWAIT_DISABLE
-+#define WRITE_MODE CONTROLLED_BY_NWE
-+#define READ_MODE CONTROLLED_BY_NRD
-+
-+#endif
-diff -urN at91bootstrap-2.3/include/smc.h at91bootstrap-2.3.2/include/smc.h
---- at91bootstrap-2.3/include/smc.h 1970-01-01 01:00:00.000000000 +0100
-+++ at91bootstrap-2.3.2/include/smc.h 2007-08-14 23:05:30.000000000 +0200
-@@ -0,0 +1,19 @@
-+#define MASTER_CLOCK_CYCLE (1000000000/MASTER_CLOCK)
-+#define _ns(x) ((x)/MASTER_CLOCK_CYCLE)
-+
-+#define CONTROLLED_BY_NRD AT91C_SMC_READMODE
-+#define CONTROLLED_BY_NCS_RD 0
-+#define CONTROLLED_BY_NWE AT91C_SMC_WRITEMODE
-+#define CONTROLLED_BY_NCS_WR 0
-+
-+#define TDF_OPTIMIZATION_ON AT91C_SMC_TDFEN
-+#define TDF_OPTIMIZATION_OFF 0
-+
-+#define PAGE_MODE_ON AT91C_SMC_PMEN
-+#define PAGE_MODE_OFF 0
-+
-+#define DATABUS_PULLUP_ON 0
-+#define DATABUS_PULLUP_OFF AT91C_EBI_DBPUC
-+
-+#define MEMORY_VOLTAGE_1_8V 0
-+#define MEMORY_VOLTAGE_3_3V AT91C_EBI_VDDIOMSEL
-diff -urN at91bootstrap-2.3/main.c at91bootstrap-2.3.2/main.c
---- at91bootstrap-2.3/main.c 2006-12-05 11:27:24.000000000 +0100
-+++ at91bootstrap-2.3.2/main.c 2007-08-14 21:15:38.000000000 +0200
-@@ -38,6 +38,7 @@
- #include "include/main.h"
- #include "include/debug.h"
- #include "include/dataflash.h"
-+#include "include/flash.h"
- #include "include/nandflash.h"
-
- /*------------------------------------------------------------------------------*/
-@@ -60,6 +61,10 @@
- load_df(AT91C_SPI_PCS_DATAFLASH, IMG_ADDRESS, IMG_SIZE, JUMP_ADDR);
- #endif
-
-+#ifdef CFG_FLASH
-+ load_flash(IMG_ADDRESS, IMG_SIZE, JUMP_ADDR);
-+#endif
-+
- /* Load from Nandflash in RAM */
- #ifdef CFG_NANDFLASH
- load_nandflash(IMG_ADDRESS, IMG_SIZE, JUMP_ADDR);
-diff -urN at91bootstrap-2.3/MAKEALL at91bootstrap-2.3.2/MAKEALL
---- at91bootstrap-2.3/MAKEALL 2007-04-09 19:47:20.000000000 +0200
-+++ at91bootstrap-2.3.2/MAKEALL 2007-08-14 22:43:19.000000000 +0200
-@@ -1,7 +1,7 @@
- #!/bin/bash
-
--make toolchain
--source gcc-3.4.6-uclibc.sh
-+#make toolchain
-+source gcc-4.1.2-uclibc-external.sh
- make distrib
- make MEMORY=dataflashcard at91sam9260dfc_defconfig
- make
-@@ -9,6 +9,8 @@
- make
- make MEMORY=nandflash at91sam9260ek_defconfig
- make
-+make MEMORY=flash at91sam9260pf_defconfig
-+make
- make MEMORY=dataflash at91sam9261ek_defconfig
- make
- make MEMORY=nandflash at91sam9261ek_defconfig
-diff -urN at91bootstrap-2.3/Makefile at91bootstrap-2.3.2/Makefile
---- at91bootstrap-2.3/Makefile 2007-08-14 23:53:42.000000000 +0200
-+++ at91bootstrap-2.3.2/Makefile 2007-08-14 22:36:24.000000000 +0200
-@@ -8,7 +8,7 @@
-
- TOPDIR := $(CURDIR)
-
--VERSION:=2.3.1
-+VERSION:=2.3.2
-
- include .config
-
-@@ -114,6 +114,15 @@
- echo SPI_BOOT=SPI_BOOT_CS1 >> .config
- echo SPI_CLK=$(CONFIG_SPI_CLK) >> .config
-
-+at91sam9260pf_defconfig: clean
-+ echo BOARDNAME=at91sam9260pf > .config
-+ echo BOARD=at91sam9260ek >> .config
-+ echo PROJECT=$(MEMORY) >> .config
-+ echo CONFIG_$(CFG_MEMORY)=y >> .config
-+ echo SPI_MODE=$(CONFIG_SPI_MODE) >> .config
-+ echo SPI_BOOT=SPI_BOOT_CS0 >> .config
-+ echo SPI_CLK=$(CONFIG_SPI_CLK) >> .config
-+
- at91sam9261ek_defconfig: clean
- echo BOARDNAME=at91sam9261ek > .config
- echo BOARD=at91sam9261ek >> .config
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 12:44:08 +0000