summaryrefslogtreecommitdiff
path: root/target/device/Atmel/atngw100/kernel-patches
diff options
context:
space:
mode:
Diffstat (limited to 'target/device/Atmel/atngw100/kernel-patches')
-rw-r--r--target/device/Atmel/atngw100/kernel-patches/linux-2.6.23-100-avr32-atmel.2.patch19857
-rw-r--r--target/device/Atmel/atngw100/kernel-patches/linux-2.6.23-200-fix-include-typo-for-atngw100-board.patch11
-rw-r--r--target/device/Atmel/atngw100/kernel-patches/linux-2.6.24-100-avr32-git.1.patch16922
-rw-r--r--target/device/Atmel/atngw100/kernel-patches/linux-2.6.24-avr32-mmc.patch255
4 files changed, 37045 insertions, 0 deletions
diff --git a/target/device/Atmel/atngw100/kernel-patches/linux-2.6.23-100-avr32-atmel.2.patch b/target/device/Atmel/atngw100/kernel-patches/linux-2.6.23-100-avr32-atmel.2.patch
new file mode 100644
index 000000000..1f0a5f542
--- /dev/null
+++ b/target/device/Atmel/atngw100/kernel-patches/linux-2.6.23-100-avr32-atmel.2.patch
@@ -0,0 +1,19857 @@
+ MAINTAINERS | 7 +
+ Makefile | 2 +-
+ arch/avr32/Kconfig | 34 +-
+ arch/avr32/Makefile | 3 +-
+ arch/avr32/boards/atngw100/Kconfig | 12 +
+ arch/avr32/boards/atngw100/flash.c | 5 +-
+ arch/avr32/boards/atngw100/setup.c | 26 +-
+ arch/avr32/boards/atstk1000/Kconfig | 82 +-
+ arch/avr32/boards/atstk1000/Makefile | 2 +
+ arch/avr32/boards/atstk1000/atstk1000.h | 2 +
+ arch/avr32/boards/atstk1000/atstk1002.c | 148 ++-
+ arch/avr32/boards/atstk1000/atstk1003.c | 181 +++
+ arch/avr32/boards/atstk1000/atstk1004.c | 152 +++
+ arch/avr32/boards/atstk1000/flash.c | 5 +-
+ arch/avr32/boards/atstk1000/setup.c | 64 +
+ arch/avr32/configs/atngw100_defconfig | 210 +++-
+ arch/avr32/configs/atstk1002_defconfig | 482 +++++--
+ arch/avr32/configs/atstk1003_defconfig | 1045 ++++++++++++++
+ arch/avr32/configs/atstk1004_defconfig | 722 ++++++++++
+ arch/avr32/drivers/Makefile | 1 +
+ arch/avr32/drivers/dw-dmac.c | 761 +++++++++++
+ arch/avr32/drivers/dw-dmac.h | 42 +
+ arch/avr32/kernel/Makefile | 6 +-
+ arch/avr32/kernel/dma-controller.c | 34 +
+ arch/avr32/kernel/entry-avr32b.S | 26 +-
+ arch/avr32/kernel/setup.c | 2 +-
+ arch/avr32/kernel/vmlinux.lds.S | 143 ++
+ arch/avr32/kernel/vmlinux.lds.c | 142 --
+ arch/avr32/mach-at32ap/Kconfig | 19 +-
+ arch/avr32/mach-at32ap/Makefile | 5 +-
+ arch/avr32/mach-at32ap/at32ap7000.c | 1324 ------------------
+ arch/avr32/mach-at32ap/at32ap700x.c | 1754 ++++++++++++++++++++++++
+ arch/avr32/mach-at32ap/clock.c | 116 ++
+ arch/avr32/mach-at32ap/gpio-dev.c | 573 ++++++++
+ arch/avr32/mach-at32ap/hsmc.c | 129 ++-
+ arch/avr32/mach-at32ap/pio.c | 80 ++
+ arch/avr32/mach-at32ap/pm.h | 8 +
+ arch/avr32/mm/dma-coherent.c | 7 +
+ arch/avr32/mm/init.c | 12 +-
+ drivers/char/watchdog/Kconfig | 2 +-
+ drivers/char/watchdog/at32ap700x_wdt.c | 69 +-
+ drivers/i2c/busses/Kconfig | 8 +
+ drivers/i2c/busses/Makefile | 1 +
+ drivers/i2c/busses/i2c-atmeltwi.c | 436 ++++++
+ drivers/i2c/busses/i2c-atmeltwi.h | 117 ++
+ drivers/misc/Kconfig | 9 +
+ drivers/misc/Makefile | 1 +
+ drivers/misc/atmel-ssc.c | 174 +++
+ drivers/mmc/host/Kconfig | 10 +
+ drivers/mmc/host/Makefile | 1 +
+ drivers/mmc/host/atmel-mci.c | 1176 ++++++++++++++++
+ drivers/mmc/host/atmel-mci.h | 192 +++
+ drivers/mtd/chips/cfi_cmdset_0001.c | 43 +
+ drivers/mtd/chips/cfi_cmdset_0002.c | 6 +-
+ drivers/pcmcia/Kconfig | 7 +
+ drivers/pcmcia/Makefile | 1 +
+ drivers/pcmcia/at32_cf.c | 531 ++++++++
+ drivers/pcmcia/cistpl.c | 48 +-
+ drivers/spi/atmel_spi.c | 4 +-
+ drivers/usb/gadget/Kconfig | 26 +-
+ drivers/usb/gadget/Makefile | 1 +
+ drivers/usb/gadget/atmel_usba_udc.c | 2038 ++++++++++++++++++++++++++++
+ drivers/usb/gadget/atmel_usba_udc.h | 350 +++++
+ drivers/video/atmel_lcdfb.c | 6 +-
+ drivers/video/backlight/Kconfig | 12 +
+ drivers/video/backlight/Makefile | 2 +
+ drivers/video/backlight/ltv350qv.c | 339 +++++
+ drivers/video/backlight/ltv350qv.h | 95 ++
+ include/asm-avr32/arch-at32ap/at32ap7000.h | 35 -
+ include/asm-avr32/arch-at32ap/at32ap700x.h | 35 +
+ include/asm-avr32/arch-at32ap/board.h | 39 +
+ include/asm-avr32/arch-at32ap/cpu.h | 2 +-
+ include/asm-avr32/arch-at32ap/io.h | 4 +-
+ include/asm-avr32/arch-at32ap/portmux.h | 13 +
+ include/asm-avr32/arch-at32ap/smc.h | 51 +-
+ include/asm-avr32/dma-controller.h | 166 +++
+ include/asm-avr32/dma-mapping.h | 17 +-
+ include/asm-avr32/system.h | 13 +-
+ include/asm-avr32/unistd.h | 13 +
+ include/linux/atmel-ssc.h | 312 +++++
+ include/linux/spi/at73c213.h | 25 +
+ include/pcmcia/cs_types.h | 2 +-
+ init/do_mounts.c | 8 +-
+ scripts/checkstack.pl | 5 +
+ sound/Kconfig | 6 +
+ sound/Makefile | 3 +-
+ sound/avr32/Kconfig | 11 +
+ sound/avr32/Makefile | 3 +
+ sound/avr32/ac97c.c | 914 +++++++++++++
+ sound/avr32/ac97c.h | 71 +
+ sound/oss/Kconfig | 4 +
+ sound/oss/Makefile | 1 +
+ sound/oss/at32_abdac.c | 722 ++++++++++
+ sound/oss/at32_abdac.h | 59 +
+ sound/spi/Kconfig | 31 +
+ sound/spi/Makefile | 5 +
+ sound/spi/at73c213.c | 1121 +++++++++++++++
+ sound/spi/at73c213.h | 119 ++
+ 98 files changed, 16057 insertions(+), 1826 deletions(-)
+ create mode 100644 arch/avr32/boards/atngw100/Kconfig
+ create mode 100644 arch/avr32/boards/atstk1000/atstk1003.c
+ create mode 100644 arch/avr32/boards/atstk1000/atstk1004.c
+ create mode 100644 arch/avr32/configs/atstk1003_defconfig
+ create mode 100644 arch/avr32/configs/atstk1004_defconfig
+ create mode 100644 arch/avr32/drivers/Makefile
+ create mode 100644 arch/avr32/drivers/dw-dmac.c
+ create mode 100644 arch/avr32/drivers/dw-dmac.h
+ create mode 100644 arch/avr32/kernel/dma-controller.c
+ create mode 100644 arch/avr32/kernel/vmlinux.lds.S
+ delete mode 100644 arch/avr32/kernel/vmlinux.lds.c
+ delete mode 100644 arch/avr32/mach-at32ap/at32ap7000.c
+ create mode 100644 arch/avr32/mach-at32ap/at32ap700x.c
+ create mode 100644 arch/avr32/mach-at32ap/gpio-dev.c
+ create mode 100644 drivers/i2c/busses/i2c-atmeltwi.c
+ create mode 100644 drivers/i2c/busses/i2c-atmeltwi.h
+ create mode 100644 drivers/misc/atmel-ssc.c
+ create mode 100644 drivers/mmc/host/atmel-mci.c
+ create mode 100644 drivers/mmc/host/atmel-mci.h
+ create mode 100644 drivers/pcmcia/at32_cf.c
+ create mode 100644 drivers/usb/gadget/atmel_usba_udc.c
+ create mode 100644 drivers/usb/gadget/atmel_usba_udc.h
+ create mode 100644 drivers/video/backlight/ltv350qv.c
+ create mode 100644 drivers/video/backlight/ltv350qv.h
+ delete mode 100644 include/asm-avr32/arch-at32ap/at32ap7000.h
+ create mode 100644 include/asm-avr32/arch-at32ap/at32ap700x.h
+ create mode 100644 include/asm-avr32/dma-controller.h
+ create mode 100644 include/linux/atmel-ssc.h
+ create mode 100644 include/linux/spi/at73c213.h
+ create mode 100644 sound/avr32/Kconfig
+ create mode 100644 sound/avr32/Makefile
+ create mode 100644 sound/avr32/ac97c.c
+ create mode 100644 sound/avr32/ac97c.h
+ create mode 100644 sound/oss/at32_abdac.c
+ create mode 100644 sound/oss/at32_abdac.h
+ create mode 100644 sound/spi/Kconfig
+ create mode 100644 sound/spi/Makefile
+ create mode 100644 sound/spi/at73c213.c
+ create mode 100644 sound/spi/at73c213.h
+
+diff --git a/MAINTAINERS b/MAINTAINERS
+index 9a91d9e..587afe3 100644
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -669,6 +669,13 @@ P: Haavard Skinnemoen
+ M: hskinnemoen@atmel.com
+ S: Supported
+
++ATMEL USBA UDC DRIVER
++P: Haavard Skinnemoen
++M: hskinnemoen@atmel.com
++L: kernel@avr32linux.org
++W: http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
++S: Supported
++
+ ATMEL WIRELESS DRIVER
+ P: Simon Kelley
+ M: simon@thekelleys.org.uk
+diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
+index d12346a..62913a4 100644
+--- a/arch/avr32/Kconfig
++++ b/arch/avr32/Kconfig
+@@ -87,19 +87,36 @@ config PLATFORM_AT32AP
+ select MMU
+ select PERFORMANCE_COUNTERS
+
++config CPU_AT32AP700X
++ bool
++ select PLATFORM_AT32AP
++
+ choice
+ prompt "AVR32 CPU type"
+ default CPU_AT32AP7000
+
+ config CPU_AT32AP7000
+ bool "AT32AP7000"
+- select PLATFORM_AT32AP
++ select CPU_AT32AP700X
++
++config CPU_AT32AP7001
++ bool "AT32AP7001"
++ select CPU_AT32AP700X
++
++config CPU_AT32AP7002
++ bool "AT32AP7002"
++ select CPU_AT32AP700X
++
+ endchoice
+
+ #
+ # CPU Daughterboards for ATSTK1000
+ config BOARD_ATSTK1002
+ bool
++config BOARD_ATSTK1003
++ bool
++config BOARD_ATSTK1004
++ bool
+
+ choice
+ prompt "AVR32 board type"
+@@ -108,6 +125,8 @@ choice
+ config BOARD_ATSTK1000
+ bool "ATSTK1000 evaluation board"
+ select BOARD_ATSTK1002 if CPU_AT32AP7000
++ select BOARD_ATSTK1003 if CPU_AT32AP7001
++ select BOARD_ATSTK1004 if CPU_AT32AP7002
+
+ config BOARD_ATNGW100
+ bool "ATNGW100 Network Gateway"
+@@ -116,6 +135,9 @@ endchoice
+ if BOARD_ATSTK1000
+ source "arch/avr32/boards/atstk1000/Kconfig"
+ endif
++if BOARD_ATNGW100
++source "arch/avr32/boards/atngw100/Kconfig"
++endif
+
+ choice
+ prompt "Boot loader type"
+@@ -129,15 +151,15 @@ source "arch/avr32/mach-at32ap/Kconfig"
+
+ config LOAD_ADDRESS
+ hex
+- default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
++ default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
+
+ config ENTRY_ADDRESS
+ hex
+- default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
++ default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
+
+ config PHYS_OFFSET
+ hex
+- default 0x10000000 if CPU_AT32AP7000=y
++ default 0x10000000 if CPU_AT32AP700X=y
+
+ source "kernel/Kconfig.preempt"
+
+@@ -175,6 +197,10 @@ config OWNERSHIP_TRACE
+ enabling Nexus-compliant debuggers to keep track of the PID of the
+ currently executing task.
+
++config DW_DMAC
++ tristate "Synopsys DesignWare DMA Controller support"
++ default y if CPU_AT32AP7000
++
+ # FPU emulation goes here
+
+ source "kernel/Kconfig.hz"
+diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
+index dc6bc01..96f0030 100644
+--- a/arch/avr32/Makefile
++++ b/arch/avr32/Makefile
+@@ -16,7 +16,7 @@ AFLAGS += -mrelax -mno-pic
+ CFLAGS_MODULE += -mno-relax
+ LDFLAGS_vmlinux += --relax
+
+-cpuflags-$(CONFIG_CPU_AT32AP7000) += -mcpu=ap7000
++cpuflags-$(CONFIG_PLATFORM_AT32AP) += -march=ap
+
+ CFLAGS += $(cpuflags-y)
+ AFLAGS += $(cpuflags-y)
+@@ -31,6 +31,7 @@ core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/
+ core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/
+ core-y += arch/avr32/kernel/
+ core-y += arch/avr32/mm/
++drivers-y += arch/avr32/drivers/
+ libs-y += arch/avr32/lib/
+
+ archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
+diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig
+new file mode 100644
+index 0000000..5d922df
+--- /dev/null
++++ b/arch/avr32/boards/atngw100/Kconfig
+@@ -0,0 +1,12 @@
++# NGW100 customization
++
++config BOARD_ATNGW100_I2C_GPIO
++ bool "Use GPIO for i2c instead of built-in TWI module"
++ help
++ The driver for the built-in TWI module has been plagued by
++ various problems, while the i2c-gpio driver is based on the
++ trusty old i2c-algo-bit bitbanging engine, making it work
++ on pretty much any setup.
++
++ Choose 'Y' here if you're having i2c-related problems and
++ want to rule out the i2c bus driver.
+diff --git a/arch/avr32/boards/atngw100/flash.c b/arch/avr32/boards/atngw100/flash.c
+index f9b32a8..b07ae63 100644
+--- a/arch/avr32/boards/atngw100/flash.c
++++ b/arch/avr32/boards/atngw100/flash.c
+@@ -15,7 +15,7 @@
+
+ #include <asm/arch/smc.h>
+
+-static struct smc_config flash_config __initdata = {
++static struct smc_timing flash_timing __initdata = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 40,
+ .ncs_write_setup = 0,
+@@ -28,7 +28,9 @@ static struct smc_config flash_config __initdata = {
+
+ .read_cycle = 120,
+ .write_cycle = 120,
++};
+
++static struct smc_config flash_config __initdata = {
+ .bus_width = 2,
+ .nrd_controlled = 1,
+ .nwe_controlled = 1,
+@@ -82,6 +84,7 @@ static int __init atngw100_flash_init(void)
+ {
+ int ret;
+
++ smc_set_timing(&flash_config, &flash_timing);
+ ret = smc_set_configuration(0, &flash_config);
+ if (ret < 0) {
+ printk(KERN_ERR "atngw100: failed to set NOR flash timing\n");
+diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
+index ef80156..2a5f587 100644
+--- a/arch/avr32/boards/atngw100/setup.c
++++ b/arch/avr32/boards/atngw100/setup.c
+@@ -42,6 +42,11 @@ static struct spi_board_info spi0_board_info[] __initdata = {
+ },
+ };
+
++static struct mci_platform_data __initdata mci0_data = {
++ .detect_pin = GPIO_PIN_PC(25),
++ .wp_pin = GPIO_PIN_PE(0),
++};
++
+ /*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+@@ -124,9 +129,13 @@ static struct platform_device ngw_gpio_leds = {
+ }
+ };
+
++#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
+ static struct i2c_gpio_platform_data i2c_gpio_data = {
+- .sda_pin = GPIO_PIN_PA(6),
+- .scl_pin = GPIO_PIN_PA(7),
++ .sda_pin = GPIO_PIN_PA(6),
++ .scl_pin = GPIO_PIN_PA(7),
++ .sda_is_open_drain = 1,
++ .scl_is_open_drain = 1,
++ .udelay = 2, /* close to 100 kHz */
+ };
+
+ static struct platform_device i2c_gpio_device = {
+@@ -136,6 +145,7 @@ static struct platform_device i2c_gpio_device = {
+ .platform_data = &i2c_gpio_data,
+ },
+ };
++#endif
+
+ static int __init atngw100_init(void)
+ {
+@@ -154,6 +164,8 @@ static int __init atngw100_init(void)
+ set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
+
+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++ at32_add_device_mci(0, &mci0_data);
++ at32_add_device_usba(0, NULL);
+
+ for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
+ at32_select_gpio(ngw_leds[i].gpio,
+@@ -161,9 +173,15 @@ static int __init atngw100_init(void)
+ }
+ platform_device_register(&ngw_gpio_leds);
+
+- at32_select_gpio(i2c_gpio_data.sda_pin, 0);
+- at32_select_gpio(i2c_gpio_data.scl_pin, 0);
++#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
++ at32_select_gpio(i2c_gpio_data.sda_pin,
++ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
++ at32_select_gpio(i2c_gpio_data.scl_pin,
++ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ platform_device_register(&i2c_gpio_device);
++#else
++ at32_add_device_twi(0);
++#endif
+
+ return 0;
+ }
+diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
+index 718578f..aac73a6 100644
+--- a/arch/avr32/boards/atstk1000/Kconfig
++++ b/arch/avr32/boards/atstk1000/Kconfig
+@@ -1,34 +1,34 @@
+ # STK1000 customization
+
+-if BOARD_ATSTK1002
++if BOARD_ATSTK1000
+
+-config BOARD_ATSTK1002_CUSTOM
+- bool "Non-default STK-1002 jumper settings"
++config BOARD_ATSTK100X_CUSTOM
++ bool "Non-default STK1002/STK1003/STK1004 jumper settings"
+ help
+ You will normally leave the jumpers on the CPU card at their
+ default settings. If you need to use certain peripherals,
+ you will need to change some of those jumpers.
+
+-if BOARD_ATSTK1002_CUSTOM
++if BOARD_ATSTK100X_CUSTOM
+
+-config BOARD_ATSTK1002_SW1_CUSTOM
++config BOARD_ATSTK100X_SW1_CUSTOM
+ bool "SW1: use SSC1 (not SPI0)"
+ help
+ This also prevents using the external DAC as an audio interface,
+ and means you can't initialize the on-board QVGA display.
+
+-config BOARD_ATSTK1002_SW2_CUSTOM
++config BOARD_ATSTK100X_SW2_CUSTOM
+ bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
+ help
+ If you change this you'll want an updated boot loader putting
+ the console on UART-C not UART-A.
+
+-config BOARD_ATSTK1002_SW3_CUSTOM
++config BOARD_ATSTK100X_SW3_CUSTOM
+ bool "SW3: use TIMER1 (not SSC0 and GCLK)"
+ help
+ This also prevents using the external DAC as an audio interface.
+
+-config BOARD_ATSTK1002_SW4_CUSTOM
++config BOARD_ATSTK100X_SW4_CUSTOM
+ bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
+ help
+ To use the camera interface you'll need a custom card (on the
+@@ -36,27 +36,29 @@ config BOARD_ATSTK1002_SW4_CUSTOM
+
+ config BOARD_ATSTK1002_SW5_CUSTOM
+ bool "SW5: use MACB1 (not LCDC)"
++ depends on BOARD_ATSTK1002
+
+ config BOARD_ATSTK1002_SW6_CUSTOM
+ bool "SW6: more GPIOs (not MACB0)"
++ depends on BOARD_ATSTK1002
+
+ endif # custom
+
+-config BOARD_ATSTK1002_SPI1
++config BOARD_ATSTK100X_SPI1
+ bool "Configure SPI1 controller"
+- depends on !BOARD_ATSTK1002_SW4_CUSTOM
++ depends on !BOARD_ATSTK100X_SW4_CUSTOM
+ help
+ All the signals for the second SPI controller are available on
+ GPIO lines and accessed through the J1 jumper block. Say "y"
+ here to configure that SPI controller.
+
+-config BOARD_ATSTK1002_J2_LED
++config BOARD_ATSTK1000_J2_LED
+ bool
+- default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
++ default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB
+
+ choice
+ prompt "LEDs connected to J2:"
+- depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM
++ depends on LEDS_GPIO && !BOARD_ATSTK100X_SW4_CUSTOM
+ optional
+ help
+ Select this if you have jumpered the J2 jumper block to the
+@@ -64,16 +66,64 @@ choice
+ IDC cable. A default "heartbeat" trigger is provided, but
+ you can of course override this.
+
+-config BOARD_ATSTK1002_J2_LED8
++config BOARD_ATSTK1000_J2_LED8
+ bool "LED0..LED7"
+ help
+ Select this if J2 is jumpered to LED0..LED7 amber leds.
+
+-config BOARD_ATSTK1002_J2_RGB
++config BOARD_ATSTK1000_J2_RGB
+ bool "RGB leds"
+ help
+ Select this if J2 is jumpered to the RGB leds.
+
+ endchoice
+
+-endif # stk 1002
++config BOARD_ATSTK1000_EXTDAC
++ bool
++ depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
++ default y
++
++config BOARD_ATSTK100X_ENABLE_AC97
++ bool "Use AC97C instead of ABDAC"
++ help
++ Select this if you want to use the built-in AC97 controller
++ instead of the built-in Audio Bitstream DAC. These share
++ the same I/O pins on the AP7000, so both can't be enabled
++ at the same time.
++
++ Note that the STK1000 kit doesn't ship with an AC97 codec on
++ board, so say N unless you've got an expansion board with an
++ AC97 codec on it that you want to use.
++
++config BOARD_ATSTK1000_CF_HACKS
++ bool "ATSTK1000 CompactFlash hacks"
++ depends on !BOARD_ATSTK100X_SW4_CUSTOM
++ help
++ Select this if you have re-routed the CompactFlash RESET and
++ CD signals to GPIOs on your STK1000. This is necessary for
++ reset and card detection to work properly, although some CF
++ cards may be able to cope without reset.
++
++config BOARD_ATSTK1000_CF_RESET_PIN
++ hex "CompactFlash RESET pin"
++ default 0x30
++ depends on BOARD_ATSTK1000_CF_HACKS
++ help
++ Select which GPIO pin to use for the CompactFlash RESET
++ signal. This is specified as a hexadecimal number and should
++ be defined as 0x20 * gpio_port + pin.
++
++ The default is 0x30, which is pin 16 on PIOB, aka GPIO14.
++
++config BOARD_ATSTK1000_CF_DETECT_PIN
++ hex "CompactFlash DETECT pin"
++ default 0x3e
++ depends on BOARD_ATSTK1000_CF_HACKS
++ help
++ Select which GPIO pin to use for the CompactFlash CD
++ signal. This is specified as a hexadecimal number and should
++ be defined as 0x20 * gpio_port + pin.
++
++ The default is 0x3e, which is pin 30 on PIOB, aka GPIO15.
++
++endif # stk 1000
+diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile
+index 8e09922..beead86 100644
+--- a/arch/avr32/boards/atstk1000/Makefile
++++ b/arch/avr32/boards/atstk1000/Makefile
+@@ -1,2 +1,4 @@
+ obj-y += setup.o flash.o
+ obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o
++obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o
++obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o
+diff --git a/arch/avr32/boards/atstk1000/atstk1000.h b/arch/avr32/boards/atstk1000/atstk1000.h
+index 9a49ed0..9392d32 100644
+--- a/arch/avr32/boards/atstk1000/atstk1000.h
++++ b/arch/avr32/boards/atstk1000/atstk1000.h
+@@ -12,4 +12,6 @@
+
+ extern struct atmel_lcdfb_info atstk1000_lcdc_data;
+
++void atstk1000_setup_j2_leds(void);
++
+ #endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */
+diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
+index c9981b7..d30de89 100644
+--- a/arch/avr32/boards/atstk1000/atstk1002.c
++++ b/arch/avr32/boards/atstk1000/atstk1002.c
+@@ -11,17 +11,17 @@
+ #include <linux/etherdevice.h>
+ #include <linux/init.h>
+ #include <linux/kernel.h>
+-#include <linux/leds.h>
+ #include <linux/platform_device.h>
+ #include <linux/string.h>
+ #include <linux/types.h>
+ #include <linux/spi/spi.h>
++#include <linux/spi/at73c213.h>
+
+ #include <video/atmel_lcdc.h>
+
+ #include <asm/io.h>
+ #include <asm/setup.h>
+-#include <asm/arch/at32ap7000.h>
++#include <asm/arch/at32ap700x.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/init.h>
+ #include <asm/arch/portmux.h>
+@@ -48,8 +48,24 @@ static struct eth_platform_data __initdata eth_data[2] = {
+ },
+ };
+
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static struct at73c213_board_info at73c213_data = {
++ .ssc_id = 0,
++ .shortname = "AVR32 STK1000 external DAC",
++};
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
+ static struct spi_board_info spi0_board_info[] __initdata = {
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++ {
++ /* AT73C213 */
++ .modalias = "at73c213",
++ .max_speed_hz = 200000,
++ .chip_select = 0,
++ .mode = SPI_MODE_1,
++ .platform_data = &at73c213_data,
++ },
++#endif
+ {
+ /* QVGA display */
+ .modalias = "ltv350qv",
+@@ -60,12 +76,30 @@ static struct spi_board_info spi0_board_info[] __initdata = {
+ };
+ #endif
+
+-#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
+ static struct spi_board_info spi1_board_info[] __initdata = { {
+ /* patch in custom entries here */
+ } };
+ #endif
+
++static struct mci_platform_data __initdata mci0_data = {
++ .detect_pin = GPIO_PIN_NONE,
++ .wp_pin = GPIO_PIN_NONE,
++};
++
++static struct cf_platform_data __initdata cf0_data = {
++#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
++ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
++ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
++#else
++ .detect_pin = GPIO_PIN_NONE,
++ .reset_pin = GPIO_PIN_NONE,
++#endif
++ .vcc_pin = GPIO_PIN_NONE,
++ .ready_pin = GPIO_PIN_PB(27),
++ .cs = 4,
++};
++
+ /*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+@@ -121,68 +155,44 @@ static void __init set_hw_addr(struct platform_device *pdev)
+ clk_put(pclk);
+ }
+
+-#ifdef CONFIG_BOARD_ATSTK1002_J2_LED
+-
+-static struct gpio_led stk_j2_led[] = {
+-#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8
+-#define LEDSTRING "J2 jumpered to LED8"
+- { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
+- { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
+- { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
+- { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
+- { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
+- { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
+- { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
+- { .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
+- .default_trigger = "heartbeat", },
+-#else /* RGB */
+-#define LEDSTRING "J2 jumpered to RGB LEDs"
+- { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), },
+- { .name = "g1:green", .gpio = GPIO_PIN_PB(10), },
+- { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), },
+-
+- { .name = "r2:red", .gpio = GPIO_PIN_PB( 9),
+- .default_trigger = "heartbeat", },
+- { .name = "g2:green", .gpio = GPIO_PIN_PB(13), },
+- { .name = "b2:blue", .gpio = GPIO_PIN_PB(15),
+- .default_trigger = "heartbeat", },
+- /* PB16, PB30 unused */
+-#endif
+-};
+-
+-static struct gpio_led_platform_data stk_j2_led_data = {
+- .num_leds = ARRAY_SIZE(stk_j2_led),
+- .leds = stk_j2_led,
+-};
+-
+-static struct platform_device stk_j2_led_dev = {
+- .name = "leds-gpio",
+- .id = 2, /* gpio block J2 */
+- .dev = {
+- .platform_data = &stk_j2_led_data,
+- },
+-};
+-
+-static void setup_j2_leds(void)
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static void __init atstk1002_setup_extdac(void)
+ {
+- unsigned i;
+-
+- for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++)
+- at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
+-
+- printk("STK1002: " LEDSTRING "\n");
+- platform_device_register(&stk_j2_led_dev);
++ struct clk *gclk;
++ struct clk *pll;
++
++ gclk = clk_get(NULL, "gclk0");
++ if (IS_ERR(gclk))
++ goto err_gclk;
++ pll = clk_get(NULL, "pll0");
++ if (IS_ERR(pll))
++ goto err_pll;
++
++ if (clk_set_parent(gclk, pll)) {
++ pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
++ goto err_set_clk;
++ }
++
++ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++ at73c213_data.dac_clk = gclk;
++
++err_set_clk:
++ clk_put(pll);
++err_pll:
++ clk_put(gclk);
++err_gclk:
++ return;
+ }
+-
+ #else
+-static void setup_j2_leds(void)
++static void __init atstk1002_setup_extdac(void)
+ {
++
+ }
+-#endif
++#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
+
+ void __init setup_board(void)
+ {
+-#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
+ #else
+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+@@ -219,7 +229,7 @@ static int __init atstk1002_init(void)
+
+ at32_add_system_devices();
+
+-#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+ at32_add_device_usart(1);
+ #else
+ at32_add_device_usart(0);
+@@ -229,23 +239,35 @@ static int __init atstk1002_init(void)
+ #ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
+ set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+ #endif
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+ #endif
+-#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
+ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
+ #endif
++ at32_add_device_twi(0);
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_add_device_mci(0, &mci0_data);
++#endif
+ #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
+ set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
+ #else
+ at32_add_device_lcdc(0, &atstk1000_lcdc_data,
+ fbmem_start, fbmem_size);
+ #endif
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++ at32_add_device_usba(0, NULL);
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++ at32_add_device_ac97c(0);
++#else
++ at32_add_device_abdac(0);
++#endif
++ at32_add_device_cf(0, 2, &cf0_data);
++#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
+ at32_add_device_ssc(0, ATMEL_SSC_TX);
+ #endif
+
+- setup_j2_leds();
++ atstk1000_setup_j2_leds();
++ atstk1002_setup_extdac();
+
+ return 0;
+ }
+diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
+new file mode 100644
+index 0000000..1842b7c
+--- /dev/null
++++ b/arch/avr32/boards/atstk1000/atstk1003.c
+@@ -0,0 +1,181 @@
++/*
++ * ATSTK1003 daughterboard-specific init code
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/string.h>
++#include <linux/types.h>
++
++#include <linux/spi/at73c213.h>
++#include <linux/spi/spi.h>
++
++#include <asm/setup.h>
++
++#include <asm/arch/at32ap700x.h>
++#include <asm/arch/board.h>
++#include <asm/arch/init.h>
++#include <asm/arch/portmux.h>
++
++#include "atstk1000.h"
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static struct at73c213_board_info at73c213_data = {
++ .ssc_id = 0,
++ .shortname = "AVR32 STK1000 external DAC",
++};
++#endif
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++static struct spi_board_info spi0_board_info[] __initdata = {
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++ {
++ /* AT73C213 */
++ .modalias = "at73c213",
++ .max_speed_hz = 200000,
++ .chip_select = 0,
++ .mode = SPI_MODE_1,
++ .platform_data = &at73c213_data,
++ },
++#endif
++ /*
++ * We can control the LTV350QV LCD panel, but it isn't much
++ * point since we don't have an LCD controller...
++ */
++};
++#endif
++
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++static struct spi_board_info spi1_board_info[] __initdata = { {
++ /* patch in custom entries here */
++} };
++#endif
++
++static struct cf_platform_data __initdata cf0_data = {
++#ifdef CONFIG_BOARD_ATSTK1002_CF_HACKS
++ .detect_pin = CONFIG_BOARD_ATSTK1002_CF_DETECT_PIN,
++ .reset_pin = CONFIG_BOARD_ATSTK1002_CF_RESET_PIN,
++#else
++ .detect_pin = GPIO_PIN_NONE,
++ .reset_pin = GPIO_PIN_NONE,
++#endif
++ .vcc_pin = GPIO_PIN_NONE,
++ .ready_pin = GPIO_PIN_PB(27),
++ .cs = 4,
++};
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static void __init atstk1003_setup_extdac(void)
++{
++ struct clk *gclk;
++ struct clk *pll;
++
++ gclk = clk_get(NULL, "gclk0");
++ if (IS_ERR(gclk))
++ goto err_gclk;
++ pll = clk_get(NULL, "pll0");
++ if (IS_ERR(pll))
++ goto err_pll;
++
++ if (clk_set_parent(gclk, pll)) {
++ pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
++ goto err_set_clk;
++ }
++
++ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++ at73c213_data.dac_clk = gclk;
++
++err_set_clk:
++ clk_put(pll);
++err_pll:
++ clk_put(gclk);
++err_gclk:
++ return;
++}
++#else
++static void __init atstk1003_setup_extdac(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
++
++void __init setup_board(void)
++{
++#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
++#else
++ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
++#endif
++ /* USART 2/unused: expansion connector */
++ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
++
++ at32_setup_serial_console(0);
++}
++
++static int __init atstk1003_init(void)
++{
++ /*
++ * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
++ * SDRAM-specific pins so that nobody messes with them.
++ */
++ at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */
++ at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */
++ at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */
++ at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */
++ at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */
++ at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */
++ at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */
++ at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */
++ at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */
++ at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */
++ at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */
++ at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */
++ at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */
++ at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */
++ at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */
++ at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */
++ at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */
++
++ at32_add_system_devices();
++
++#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_add_device_usart(1);
++#else
++ at32_add_device_usart(0);
++#endif
++ at32_add_device_usart(2);
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++#endif
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_add_device_mci(0, NULL);
++#endif
++ at32_add_device_usba(0, NULL);
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++ at32_add_device_ac97c(0);
++#else
++ at32_add_device_abdac(0);
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
++ at32_add_device_ssc(0, ATMEL_SSC_TX);
++#endif
++ at32_add_device_cf(0, 2, &cf0_data);
++
++ atstk1000_setup_j2_leds();
++ atstk1003_setup_extdac();
++
++ return 0;
++}
++postcore_initcall(atstk1003_init);
+diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
+new file mode 100644
+index 0000000..96015dd
+--- /dev/null
++++ b/arch/avr32/boards/atstk1000/atstk1004.c
+@@ -0,0 +1,152 @@
++/*
++ * ATSTK1003 daughterboard-specific init code
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/string.h>
++#include <linux/types.h>
++
++#include <linux/spi/at73c213.h>
++#include <linux/spi/spi.h>
++
++#include <video/atmel_lcdc.h>
++
++#include <asm/setup.h>
++
++#include <asm/arch/at32ap700x.h>
++#include <asm/arch/board.h>
++#include <asm/arch/init.h>
++#include <asm/arch/portmux.h>
++
++#include "atstk1000.h"
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static struct at73c213_board_info at73c213_data = {
++ .ssc_id = 0,
++ .shortname = "AVR32 STK1000 external DAC",
++};
++#endif
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++static struct spi_board_info spi0_board_info[] __initdata = {
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++ {
++ /* AT73C213 */
++ .modalias = "at73c213",
++ .max_speed_hz = 200000,
++ .chip_select = 0,
++ .mode = SPI_MODE_1,
++ .platform_data = &at73c213_data,
++ },
++#endif
++ {
++ /* QVGA display */
++ .modalias = "ltv350qv",
++ .max_speed_hz = 16000000,
++ .chip_select = 1,
++ .mode = SPI_MODE_3,
++ },
++};
++#endif
++
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++static struct spi_board_info spi1_board_info[] __initdata = { {
++ /* patch in custom entries here */
++} };
++#endif
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static void __init atstk1004_setup_extdac(void)
++{
++ struct clk *gclk;
++ struct clk *pll;
++
++ gclk = clk_get(NULL, "gclk0");
++ if (IS_ERR(gclk))
++ goto err_gclk;
++ pll = clk_get(NULL, "pll0");
++ if (IS_ERR(pll))
++ goto err_pll;
++
++ if (clk_set_parent(gclk, pll)) {
++ pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
++ goto err_set_clk;
++ }
++
++ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++ at73c213_data.dac_clk = gclk;
++
++err_set_clk:
++ clk_put(pll);
++err_pll:
++ clk_put(gclk);
++err_gclk:
++ return;
++}
++#else
++static void __init atstk1004_setup_extdac(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
++
++void __init setup_board(void)
++{
++#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
++#else
++ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
++#endif
++ /* USART 2/unused: expansion connector */
++ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
++
++ at32_setup_serial_console(0);
++}
++
++static int __init atstk1004_init(void)
++{
++ at32_add_system_devices();
++
++#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_add_device_usart(1);
++#else
++ at32_add_device_usart(0);
++#endif
++ at32_add_device_usart(2);
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++#endif
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_add_device_mci(0, NULL);
++#endif
++ at32_add_device_lcdc(0, &atstk1000_lcdc_data,
++ fbmem_start, fbmem_size);
++ at32_add_device_usba(0, NULL);
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++ at32_add_device_ac97c(0);
++#else
++ at32_add_device_abdac(0);
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
++ at32_add_device_ssc(0, ATMEL_SSC_TX);
++#endif
++
++ atstk1000_setup_j2_leds();
++ atstk1004_setup_extdac();
++
++ return 0;
++}
++postcore_initcall(atstk1004_init);
+diff --git a/arch/avr32/boards/atstk1000/flash.c b/arch/avr32/boards/atstk1000/flash.c
+index aac4300..3d0a102 100644
+--- a/arch/avr32/boards/atstk1000/flash.c
++++ b/arch/avr32/boards/atstk1000/flash.c
+@@ -15,7 +15,7 @@
+
+ #include <asm/arch/smc.h>
+
+-static struct smc_config flash_config __initdata = {
++static struct smc_timing flash_timing __initdata = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 40,
+ .ncs_write_setup = 0,
+@@ -28,7 +28,9 @@ static struct smc_config flash_config __initdata = {
+
+ .read_cycle = 120,
+ .write_cycle = 120,
++};
+
++static struct smc_config flash_config __initdata = {
+ .bus_width = 2,
+ .nrd_controlled = 1,
+ .nwe_controlled = 1,
+@@ -82,6 +84,7 @@ static int __init atstk1000_flash_init(void)
+ {
+ int ret;
+
++ smc_set_timing(&flash_config, &flash_timing);
+ ret = smc_set_configuration(0, &flash_config);
+ if (ret < 0) {
+ printk(KERN_ERR "atstk1000: failed to set NOR flash timing\n");
+diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
+index c9af409..8bedf93 100644
+--- a/arch/avr32/boards/atstk1000/setup.c
++++ b/arch/avr32/boards/atstk1000/setup.c
+@@ -10,13 +10,17 @@
+ #include <linux/bootmem.h>
+ #include <linux/fb.h>
+ #include <linux/init.h>
++#include <linux/platform_device.h>
+ #include <linux/types.h>
+ #include <linux/linkage.h>
+
+ #include <video/atmel_lcdc.h>
+
+ #include <asm/setup.h>
++
++#include <asm/arch/at32ap700x.h>
+ #include <asm/arch/board.h>
++#include <asm/arch/portmux.h>
+
+ #include "atstk1000.h"
+
+@@ -61,3 +65,63 @@ struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = {
+ .default_monspecs = &atstk1000_default_monspecs,
+ .guard_time = 2,
+ };
++
++#ifdef CONFIG_BOARD_ATSTK1000_J2_LED
++#include <linux/leds.h>
++
++static struct gpio_led stk1000_j2_led[] = {
++#ifdef CONFIG_BOARD_ATSTK1000_J2_LED8
++#define LEDSTRING "J2 jumpered to LED8"
++ { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
++ { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
++ { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
++ { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
++ { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
++ { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
++ { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
++ { .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
++ .default_trigger = "heartbeat", },
++#else /* RGB */
++#define LEDSTRING "J2 jumpered to RGB LEDs"
++ { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), },
++ { .name = "g1:green", .gpio = GPIO_PIN_PB(10), },
++ { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), },
++
++ { .name = "r2:red", .gpio = GPIO_PIN_PB( 9),
++ .default_trigger = "heartbeat", },
++ { .name = "g2:green", .gpio = GPIO_PIN_PB(13), },
++ { .name = "b2:blue", .gpio = GPIO_PIN_PB(15),
++ .default_trigger = "heartbeat", },
++ /* PB16, PB30 unused */
++#endif
++};
++
++static struct gpio_led_platform_data stk1000_j2_led_data = {
++ .num_leds = ARRAY_SIZE(stk1000_j2_led),
++ .leds = stk1000_j2_led,
++};
++
++static struct platform_device stk1000_j2_led_dev = {
++ .name = "leds-gpio",
++ .id = 2, /* gpio block J2 */
++ .dev = {
++ .platform_data = &stk1000_j2_led_data,
++ },
++};
++
++void __init atstk1000_setup_j2_leds(void)
++{
++ unsigned i;
++
++ for (i = 0; i < ARRAY_SIZE(stk1000_j2_led); i++)
++ at32_select_gpio(stk1000_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
++
++ printk("STK1000: " LEDSTRING "\n");
++ platform_device_register(&stk1000_j2_led_dev);
++}
++#else /* CONFIG_BOARD_ATSTK1000_J2_LED */
++void __init atstk1000_setup_j2_leds(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_J2_LED */
+diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
+index b799a68..ca4538b 100644
+--- a/arch/avr32/configs/atngw100_defconfig
++++ b/arch/avr32/configs/atngw100_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.22-rc5
+-# Sat Jun 23 15:40:05 2007
++# Linux kernel version: 2.6.22.atmel.1
++# Thu Jul 12 17:49:20 2007
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+@@ -111,17 +111,22 @@ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
+ CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
+ CONFIG_CPU_AT32AP7000=y
++# CONFIG_CPU_AT32AP7001 is not set
++# CONFIG_CPU_AT32AP7002 is not set
+ # CONFIG_BOARD_ATSTK1000 is not set
+ CONFIG_BOARD_ATNGW100=y
++# CONFIG_BOARD_ATNGW100_I2C_GPIO is not set
+ CONFIG_LOADER_U_BOOT=y
+
+ #
+ # Atmel AVR32 AP options
+ #
+-# CONFIG_AP7000_32_BIT_SMC is not set
+-CONFIG_AP7000_16_BIT_SMC=y
+-# CONFIG_AP7000_8_BIT_SMC is not set
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++CONFIG_GPIO_DEV=y
+ CONFIG_LOAD_ADDRESS=0x10000000
+ CONFIG_ENTRY_ADDRESS=0x90000000
+ CONFIG_PHYS_OFFSET=0x10000000
+@@ -145,6 +150,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
+ # CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
+ # CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_DW_DMAC=y
+ # CONFIG_HZ_100 is not set
+ CONFIG_HZ_250=y
+ # CONFIG_HZ_300 is not set
+@@ -153,6 +159,27 @@ CONFIG_HZ=250
+ CONFIG_CMDLINE=""
+
+ #
++# Power managment options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++CONFIG_CPU_FREQ_STAT=m
++# CONFIG_CPU_FREQ_STAT_DETAILS is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
+ # Bus options
+ #
+ # CONFIG_ARCH_SUPPORTS_MSI is not set
+@@ -187,13 +214,8 @@ CONFIG_NET_KEY=y
+ # CONFIG_NET_KEY_MIGRATE is not set
+ CONFIG_INET=y
+ CONFIG_IP_MULTICAST=y
+-CONFIG_IP_ADVANCED_ROUTER=y
+-CONFIG_ASK_IP_FIB_HASH=y
+-# CONFIG_IP_FIB_TRIE is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
+ CONFIG_IP_FIB_HASH=y
+-# CONFIG_IP_MULTIPLE_TABLES is not set
+-# CONFIG_IP_ROUTE_MULTIPATH is not set
+-# CONFIG_IP_ROUTE_VERBOSE is not set
+ CONFIG_IP_PNP=y
+ CONFIG_IP_PNP_DHCP=y
+ # CONFIG_IP_PNP_BOOTP is not set
+@@ -240,6 +262,7 @@ CONFIG_IPV6_SIT=y
+ # CONFIG_NETWORK_SECMARK is not set
+ CONFIG_NETFILTER=y
+ # CONFIG_NETFILTER_DEBUG is not set
++CONFIG_BRIDGE_NETFILTER=y
+
+ #
+ # Core Netfilter Configuration
+@@ -284,6 +307,7 @@ CONFIG_NETFILTER_XT_MATCH_MAC=m
+ CONFIG_NETFILTER_XT_MATCH_MARK=m
+ CONFIG_NETFILTER_XT_MATCH_POLICY=m
+ CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+ CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+ CONFIG_NETFILTER_XT_MATCH_REALM=m
+@@ -359,13 +383,19 @@ CONFIG_IP6_NF_TARGET_REJECT=m
+ CONFIG_IP6_NF_MANGLE=m
+ CONFIG_IP6_NF_TARGET_HL=m
+ CONFIG_IP6_NF_RAW=m
++
++#
++# Bridge: Netfilter Configuration
++#
++# CONFIG_BRIDGE_NF_EBTABLES is not set
+ # CONFIG_IP_DCCP is not set
+ # CONFIG_IP_SCTP is not set
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
++CONFIG_BRIDGE=m
+ CONFIG_VLAN_8021Q=m
+ # CONFIG_DECNET is not set
++CONFIG_LLC=m
+ # CONFIG_LLC2 is not set
+ # CONFIG_IPX is not set
+ # CONFIG_ATALK is not set
+@@ -521,7 +551,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ #
+ # Misc devices
+ #
+-# CONFIG_BLINK is not set
+ # CONFIG_IDE is not set
+
+ #
+@@ -545,13 +574,26 @@ CONFIG_NETDEVICES=y
+ # CONFIG_BONDING is not set
+ # CONFIG_EQUALIZER is not set
+ CONFIG_TUN=m
+-# CONFIG_PHYLIB is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_FIXED_PHY is not set
+
+ #
+ # Ethernet (10 or 100Mbit)
+ #
+ CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
++# CONFIG_MII is not set
+ CONFIG_MACB=y
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+@@ -625,7 +667,15 @@ CONFIG_UNIX98_PTYS=y
+ # IPMI
+ #
+ # CONFIG_IPMI_HANDLER is not set
+-# CONFIG_WATCHDOG is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++CONFIG_AT32AP700X_WDT_TIMEOUT=2
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_RTC is not set
+ # CONFIG_GEN_RTC is not set
+@@ -636,7 +686,42 @@ CONFIG_UNIX98_PTYS=y
+ # TPM devices
+ #
+ # CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_ATMELTWI=m
++CONFIG_I2C_ATMELTWI_BAUDRATE=100000
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
+
+ #
+ # SPI support
+@@ -655,7 +740,7 @@ CONFIG_SPI_ATMEL=y
+ # SPI Protocol Masters
+ #
+ # CONFIG_SPI_AT25 is not set
+-# CONFIG_SPI_SPIDEV is not set
++CONFIG_SPI_SPIDEV=m
+
+ #
+ # Dallas's 1-wire bus
+@@ -706,8 +791,41 @@ CONFIG_SPI_ATMEL=y
+ #
+ # USB Gadget Support
+ #
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_ATMELMCI=y
+
+ #
+ # LED devices
+@@ -727,27 +845,62 @@ CONFIG_LEDS_TRIGGERS=y
+ CONFIG_LEDS_TRIGGER_TIMER=y
+ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
++#
++# InfiniBand support
++#
+
+ #
+-# LED drivers
++# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+ #
+
+ #
+-# LED Triggers
++# Real Time Clock
+ #
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
+
+ #
+-# InfiniBand support
++# RTC interfaces
+ #
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
+
+ #
+-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
++# I2C RTC drivers
+ #
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
+
+ #
+-# Real Time Clock
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
+ #
+-# CONFIG_RTC_CLASS is not set
++CONFIG_RTC_DRV_AT32AP700X=y
+
+ #
+ # DMA Engine support
+@@ -781,7 +934,8 @@ CONFIG_JBD=y
+ # CONFIG_OCFS2_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_ROMFS_FS is not set
+-# CONFIG_INOTIFY is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
+ # CONFIG_DNOTIFY is not set
+ # CONFIG_AUTOFS_FS is not set
+@@ -936,7 +1090,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_ENABLE_MUST_CHECK=y
+ CONFIG_MAGIC_SYSRQ=y
+ # CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
++CONFIG_DEBUG_FS=y
+ # CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
+index 3b977fd..c3d4c33 100644
+--- a/arch/avr32/configs/atstk1002_defconfig
++++ b/arch/avr32/configs/atstk1002_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.22-rc5
+-# Sat Jun 23 15:32:08 2007
++# Linux kernel version: 2.6.23.atmel.1
++# Tue Oct 16 12:57:22 2007
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+@@ -18,20 +18,15 @@ CONFIG_GENERIC_BUG=y
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+ #
+-# Code maturity level options
++# General setup
+ #
+ CONFIG_EXPERIMENTAL=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+-
+-#
+-# General setup
+-#
+ CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SWAP=y
+ CONFIG_SYSVIPC=y
+-# CONFIG_IPC_NS is not set
+ CONFIG_SYSVIPC_SYSCTL=y
+ CONFIG_POSIX_MQUEUE=y
+ CONFIG_BSD_PROCESS_ACCT=y
+@@ -39,7 +34,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
+ CONFIG_TASKSTATS=y
+ CONFIG_TASK_DELAY_ACCT=y
+ # CONFIG_TASK_XACCT is not set
+-# CONFIG_UTS_NS is not set
++# CONFIG_USER_NS is not set
+ CONFIG_AUDIT=y
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
+@@ -63,7 +58,6 @@ CONFIG_FUTEX=y
+ CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+ CONFIG_VM_EVENT_COUNTERS=y
+@@ -74,24 +68,17 @@ CONFIG_SLUB=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=1
+-
+-#
+-# Loadable module support
+-#
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
++CONFIG_MODULE_FORCE_UNLOAD=y
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+-# CONFIG_KMOD is not set
+-
+-#
+-# Block layer
+-#
++CONFIG_KMOD=y
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+ # CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
+
+ #
+ # IO Schedulers
+@@ -99,12 +86,12 @@ CONFIG_BLOCK=y
+ CONFIG_IOSCHED_NOOP=y
+ # CONFIG_IOSCHED_AS is not set
+ # CONFIG_IOSCHED_DEADLINE is not set
+-# CONFIG_IOSCHED_CFQ is not set
++CONFIG_IOSCHED_CFQ=y
+ # CONFIG_DEFAULT_AS is not set
+ # CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-CONFIG_DEFAULT_NOOP=y
+-CONFIG_DEFAULT_IOSCHED="noop"
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
+
+ #
+ # System Type and features
+@@ -114,17 +101,27 @@ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
+ CONFIG_PLATFORM_AT32AP=y
+ CONFIG_CPU_AT32AP7000=y
++# CONFIG_CPU_AT32AP7001 is not set
++# CONFIG_CPU_AT32AP7002 is not set
+ CONFIG_BOARD_ATSTK1002=y
+ CONFIG_BOARD_ATSTK1000=y
+ # CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_ATSTK1002_CUSTOM is not set
++# CONFIG_BOARD_ATSTK1002_SPI1 is not set
++# CONFIG_BOARD_ATSTK1002_J2_LED is not set
++# CONFIG_BOARD_ATSTK1002_J2_LED8 is not set
++# CONFIG_BOARD_ATSTK1002_J2_RGB is not set
++# CONFIG_BOARD_ATSTK1002_ENABLE_AC97 is not set
++# CONFIG_BOARD_ATSTK1002_CF_HACKS is not set
+ CONFIG_LOADER_U_BOOT=y
+
+ #
+ # Atmel AVR32 AP options
+ #
+-# CONFIG_AP7000_32_BIT_SMC is not set
+-CONFIG_AP7000_16_BIT_SMC=y
+-# CONFIG_AP7000_8_BIT_SMC is not set
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++CONFIG_GPIO_DEV=y
+ CONFIG_LOAD_ADDRESS=0x10000000
+ CONFIG_ENTRY_ADDRESS=0x90000000
+ CONFIG_PHYS_OFFSET=0x10000000
+@@ -147,7 +144,9 @@ CONFIG_FLAT_NODE_MEM_MAP=y
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+ # CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
+ # CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_DW_DMAC=y
+ # CONFIG_HZ_100 is not set
+ CONFIG_HZ_250=y
+ # CONFIG_HZ_300 is not set
+@@ -156,6 +155,27 @@ CONFIG_HZ=250
+ CONFIG_CMDLINE=""
+
+ #
++# Power managment options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++CONFIG_CPU_FREQ_STAT=m
++# CONFIG_CPU_FREQ_STAT_DETAILS is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
+ # Bus options
+ #
+ # CONFIG_ARCH_SUPPORTS_MSI is not set
+@@ -163,7 +183,16 @@ CONFIG_CMDLINE=""
+ #
+ # PCCARD (PCMCIA/CardBus) support
+ #
+-# CONFIG_PCCARD is not set
++CONFIG_PCCARD=m
++# CONFIG_PCMCIA_DEBUG is not set
++CONFIG_PCMCIA=m
++# CONFIG_PCMCIA_LOAD_CIS is not set
++# CONFIG_PCMCIA_IOCTL is not set
++
++#
++# PC-card bridges
++#
++CONFIG_AT32_CF=m
+
+ #
+ # Executable file formats
+@@ -251,6 +280,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_MAC80211 is not set
+ # CONFIG_IEEE80211 is not set
+ # CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
+
+ #
+ # Device Drivers
+@@ -265,10 +295,6 @@ CONFIG_STANDALONE=y
+ # CONFIG_DEBUG_DRIVER is not set
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+-
+-#
+-# Connector - unified userspace <-> kernelspace linker
+-#
+ # CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
+ # CONFIG_MTD_DEBUG is not set
+@@ -327,6 +353,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+ #
+ # Self-contained MTD device drivers
+ #
++CONFIG_MTD_DATAFLASH=m
++# CONFIG_MTD_M25P80 is not set
+ # CONFIG_MTD_SLRAM is not set
+ # CONFIG_MTD_PHRAM is not set
+ # CONFIG_MTD_MTDRAM is not set
+@@ -345,20 +373,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+ # UBI - Unsorted block images
+ #
+ # CONFIG_MTD_UBI is not set
+-
+-#
+-# Parallel port support
+-#
+ # CONFIG_PARPORT is not set
+-
+-#
+-# Plug and Play support
+-#
+-# CONFIG_PNPACPI is not set
+-
+-#
+-# Block devices
+-#
++CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=m
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+@@ -369,11 +385,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-
+-#
+-# Misc devices
+-#
+-# CONFIG_BLINK is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=m
+ # CONFIG_IDE is not set
+
+ #
+@@ -381,29 +395,34 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ #
+ # CONFIG_RAID_ATTRS is not set
+ # CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
+ # CONFIG_SCSI_NETLINK is not set
+ # CONFIG_ATA is not set
+-
+-#
+-# Multi-device support (RAID and LVM)
+-#
+ # CONFIG_MD is not set
+-
+-#
+-# Network device support
+-#
+ CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
+ CONFIG_DUMMY=y
+ # CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
+ # CONFIG_EQUALIZER is not set
+ CONFIG_TUN=m
+-# CONFIG_PHYLIB is not set
++CONFIG_PHYLIB=y
+
+ #
+-# Ethernet (10 or 100Mbit)
++# MII PHY device drivers
+ #
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++CONFIG_LXT_PHY=y
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_FIXED_PHY is not set
+ CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
++# CONFIG_MII is not set
+ CONFIG_MACB=y
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+@@ -413,6 +432,7 @@ CONFIG_MACB=y
+ #
+ # CONFIG_WLAN_PRE80211 is not set
+ # CONFIG_WLAN_80211 is not set
++# CONFIG_NET_PCMCIA is not set
+ # CONFIG_WAN is not set
+ CONFIG_PPP=m
+ # CONFIG_PPP_MULTILINK is not set
+@@ -423,27 +443,56 @@ CONFIG_PPP_DEFLATE=m
+ CONFIG_PPP_BSDCOMP=m
+ # CONFIG_PPP_MPPE is not set
+ # CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
+ # CONFIG_SLIP is not set
+ CONFIG_SLHC=m
+ # CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+-
+-#
+-# ISDN subsystem
+-#
+ # CONFIG_ISDN is not set
+-
+-#
+-# Telephony Support
+-#
+ # CONFIG_PHONE is not set
+
+ #
+ # Input device support
+ #
+-# CONFIG_INPUT is not set
++CONFIG_INPUT=m
++# CONFIG_INPUT_FF_MEMLESS is not set
++CONFIG_INPUT_POLLDEV=m
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_APPLETOUCH is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++CONFIG_MOUSE_GPIO=m
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
+
+ #
+ # Hardware I/O ports
+@@ -472,34 +521,88 @@ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ CONFIG_UNIX98_PTYS=y
+ # CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+ #
+-# IPMI
++# Watchdog Device Drivers
+ #
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_WATCHDOG is not set
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_RTC is not set
+ # CONFIG_GEN_RTC is not set
+ # CONFIG_R3964 is not set
+-# CONFIG_RAW_DRIVER is not set
+
+ #
+-# TPM devices
++# PCMCIA character devices
+ #
++# CONFIG_SYNCLINK_CS is not set
++# CONFIG_CARDMAN_4000 is not set
++# CONFIG_CARDMAN_4040 is not set
++# CONFIG_RAW_DRIVER is not set
+ # CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_ATMELTWI=m
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
+
+ #
+ # SPI support
+ #
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
+
+ #
+-# Dallas's 1-wire bus
++# SPI Protocol Masters
+ #
++# CONFIG_SPI_AT25 is not set
++CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
+ # CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
+
+ #
+@@ -517,26 +620,110 @@ CONFIG_UNIX98_PTYS=y
+ #
+ # Graphics support
+ #
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_LCD_LTV350QV=y
++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+
+ #
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
+ # CONFIG_VGASTATE is not set
+-# CONFIG_FB is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_LOGO is not set
+
+ #
+ # Sound
+ #
+-# CONFIG_SOUND is not set
++CONFIG_SOUND=m
++
++#
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++# CONFIG_SND_SUPPORT_OLD_API is not set
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++
++#
++# Generic devices
++#
++CONFIG_SND_AC97_CODEC=m
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++
++#
++# AVR32 devices
++#
++CONFIG_SND_ATMEL_AC97=m
++
++#
++# SPI devices
++#
++CONFIG_SND_AT73C213=m
++CONFIG_SND_AT73C213_TARGET_BITRATE=48000
++
++#
++# PCMCIA devices
++#
++# CONFIG_SND_VXPOCKET is not set
++# CONFIG_SND_PDAUDIOCF is not set
++
++#
++# System on Chip audio support
++#
++# CONFIG_SND_SOC is not set
++
++#
++# SoC Audio support for SuperH
++#
+
+ #
+-# USB support
++# Open Sound System
+ #
+-# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_SOUND_PRIME is not set
++CONFIG_AC97_BUS=m
++# CONFIG_HID_SUPPORT is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
+ # CONFIG_USB_ARCH_HAS_OHCI is not set
+ # CONFIG_USB_ARCH_HAS_EHCI is not set
++# CONFIG_USB is not set
+
+ #
+ # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+@@ -545,34 +732,108 @@ CONFIG_UNIX98_PTYS=y
+ #
+ # USB Gadget Support
+ #
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++# CONFIG_USB_GADGET_DEBUG_FS is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_ATMELMCI=y
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=m
++
++#
++# LED drivers
++#
++CONFIG_LEDS_GPIO=m
+
+ #
+-# LED devices
++# LED Triggers
+ #
+-# CONFIG_NEW_LEDS is not set
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=m
++CONFIG_LEDS_TRIGGER_HEARTBEAT=m
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++# CONFIG_RTC_HCTOSYS is not set
++# CONFIG_RTC_DEBUG is not set
+
+ #
+-# LED drivers
++# RTC interfaces
+ #
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
+
+ #
+-# LED Triggers
++# I2C RTC drivers
+ #
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
+
+ #
+-# InfiniBand support
++# SPI RTC drivers
+ #
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
+
+ #
+-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
++# Platform RTC drivers
+ #
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
+
+ #
+-# Real Time Clock
++# on-CPU RTC drivers
+ #
+-# CONFIG_RTC_CLASS is not set
++CONFIG_RTC_DRV_AT32AP700X=y
+
+ #
+ # DMA Engine support
+@@ -588,13 +849,21 @@ CONFIG_UNIX98_PTYS=y
+ #
+
+ #
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
+ # File systems
+ #
+-CONFIG_EXT2_FS=m
++CONFIG_EXT2_FS=y
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+-# CONFIG_EXT3_FS is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
+ # CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+@@ -609,7 +878,7 @@ CONFIG_INOTIFY_USER=y
+ # CONFIG_DNOTIFY is not set
+ # CONFIG_AUTOFS_FS is not set
+ # CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
++CONFIG_FUSE_FS=m
+
+ #
+ # CD-ROM/DVD Filesystems
+@@ -638,7 +907,7 @@ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+ CONFIG_RAMFS=y
+-CONFIG_CONFIGFS_FS=m
++CONFIG_CONFIGFS_FS=y
+
+ #
+ # Miscellaneous filesystems
+@@ -683,12 +952,17 @@ CONFIG_SUNRPC=y
+ # CONFIG_SUNRPC_BIND34 is not set
+ # CONFIG_RPCSEC_GSS_KRB5 is not set
+ # CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
++CONFIG_SMB_FS=m
++# CONFIG_SMB_NLS_DEFAULT is not set
++CONFIG_CIFS=m
++# CONFIG_CIFS_STATS is not set
++# CONFIG_CIFS_WEAK_PW_HASH is not set
++# CONFIG_CIFS_XATTR is not set
++# CONFIG_CIFS_DEBUG2 is not set
++# CONFIG_CIFS_EXPERIMENTAL is not set
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
+ # CONFIG_AFS_FS is not set
+-# CONFIG_9P_FS is not set
+
+ #
+ # Partition Types
+@@ -758,6 +1032,7 @@ CONFIG_DEBUG_FS=y
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+@@ -782,10 +1057,6 @@ CONFIG_FORCED_INLINING=y
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-
+-#
+-# Cryptographic options
+-#
+ # CONFIG_CRYPTO is not set
+
+ #
+@@ -796,6 +1067,7 @@ CONFIG_CRC_CCITT=m
+ # CONFIG_CRC16 is not set
+ # CONFIG_CRC_ITU_T is not set
+ CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_AUDIT_GENERIC=y
+ CONFIG_ZLIB_INFLATE=y
+diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
+new file mode 100644
+index 0000000..0dc834f
+--- /dev/null
++++ b/arch/avr32/configs/atstk1003_defconfig
+@@ -0,0 +1,1045 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.24-rc1
++# Thu Nov 1 10:58:37 2007
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++CONFIG_TASKSTATS=y
++CONFIG_TASK_DELAY_ACCT=y
++# CONFIG_TASK_XACCT is not set
++# CONFIG_USER_NS is not set
++CONFIG_AUDIT=y
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_RELAY=y
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_BASE_FULL is not set
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++# CONFIG_SLUB_DEBUG is not set
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_AS is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++CONFIG_DEFAULT_NOOP=y
++CONFIG_DEFAULT_IOSCHED="noop"
++
++#
++# System Type and features
++#
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
++# CONFIG_CPU_AT32AP7000 is not set
++CONFIG_CPU_AT32AP7001=y
++# CONFIG_CPU_AT32AP7002 is not set
++CONFIG_BOARD_ATSTK1003=y
++CONFIG_BOARD_ATSTK1000=y
++# CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
++# CONFIG_BOARD_ATSTK100X_SPI1 is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
++# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
++CONFIG_BOARD_ATSTK1000_EXTDAC=y
++# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
++# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
++CONFIG_LOADER_U_BOOT=y
++
++#
++# Atmel AVR32 AP options
++#
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++# CONFIG_GPIO_DEV is not set
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_DW_DMAC=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_CMDLINE=""
++
++#
++# Power management options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++CONFIG_PCCARD=m
++# CONFIG_PCMCIA_DEBUG is not set
++CONFIG_PCMCIA=m
++CONFIG_PCMCIA_LOAD_CIS=y
++# CONFIG_PCMCIA_IOCTL is not set
++
++#
++# PC-card bridges
++#
++CONFIG_AT32_CF=m
++
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_PNP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++CONFIG_FW_LOADER=m
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x8000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=m
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=m
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=m
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++# CONFIG_BLK_DEV_SD is not set
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++CONFIG_TUN=m
++# CONFIG_VETH is not set
++# CONFIG_NET_ETHERNET is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_NET_PCMCIA is not set
++# CONFIG_WAN is not set
++CONFIG_PPP=m
++# CONFIG_PPP_MULTILINK is not set
++# CONFIG_PPP_FILTER is not set
++CONFIG_PPP_ASYNC=m
++# CONFIG_PPP_SYNC_TTY is not set
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++# CONFIG_PPP_MPPE is not set
++# CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=m
++# CONFIG_INPUT_FF_MEMLESS is not set
++CONFIG_INPUT_POLLDEV=m
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_APPLETOUCH is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++CONFIG_MOUSE_GPIO=m
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_RTC is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++
++#
++# PCMCIA character devices
++#
++# CONFIG_SYNCLINK_CS is not set
++# CONFIG_CARDMAN_4000 is not set
++# CONFIG_CARDMAN_4040 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_ATMELTWI=m
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++CONFIG_SOUND=m
++
++#
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++CONFIG_SND_SUPPORT_OLD_API=y
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++
++#
++# Generic devices
++#
++CONFIG_SND_AC97_CODEC=m
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++
++#
++# AVR32 devices
++#
++CONFIG_SND_ATMEL_AC97=m
++
++#
++# SPI devices
++#
++CONFIG_SND_AT73C213=m
++CONFIG_SND_AT73C213_TARGET_BITRATE=48000
++
++#
++# PCMCIA devices
++#
++# CONFIG_SND_VXPOCKET is not set
++# CONFIG_SND_PDAUDIOCF is not set
++
++#
++# System on Chip audio support
++#
++# CONFIG_SND_SOC is not set
++
++#
++# SoC Audio support for SuperH
++#
++
++#
++# Open Sound System
++#
++CONFIG_SOUND_PRIME=m
++# CONFIG_SOUND_MSNDCLAS is not set
++# CONFIG_SOUND_MSNDPIN is not set
++CONFIG_SOUND_AT32_ABDAC=m
++CONFIG_AC97_BUS=m
++# CONFIG_HID_SUPPORT is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_DEBUG_FS=y
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++# CONFIG_MMC_BLOCK_BOUNCE is not set
++# CONFIG_SDIO_UART is not set
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_ATMELMCI=y
++# CONFIG_MMC_SPI is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++CONFIG_LEDS_GPIO=y
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
++
++#
++# Userspace I/O
++#
++CONFIG_UIO=m
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_DNOTIFY is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++CONFIG_FUSE_FS=m
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=y
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++# CONFIG_NFS_FS is not set
++# CONFIG_NFSD is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=m
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=m
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=m
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++CONFIG_FRAME_POINTER=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_KPROBES is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++# CONFIG_CRYPTO is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_CRC_CCITT=m
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_AUDIT_GENERIC=y
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
+new file mode 100644
+index 0000000..b002a46
+--- /dev/null
++++ b/arch/avr32/configs/atstk1004_defconfig
+@@ -0,0 +1,722 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.24-rc1
++# Thu Nov 1 11:07:19 2007
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++# CONFIG_SYSVIPC is not set
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_BLK_DEV_INITRD is not set
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_BASE_FULL is not set
++# CONFIG_FUTEX is not set
++# CONFIG_EPOLL is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_EVENTFD is not set
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++# CONFIG_SLAB is not set
++# CONFIG_SLUB is not set
++CONFIG_SLOB=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++# CONFIG_MODULES is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_AS is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++
++#
++# System Type and features
++#
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
++# CONFIG_CPU_AT32AP7000 is not set
++# CONFIG_CPU_AT32AP7001 is not set
++CONFIG_CPU_AT32AP7002=y
++CONFIG_BOARD_ATSTK1004=y
++CONFIG_BOARD_ATSTK1000=y
++# CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
++# CONFIG_BOARD_ATSTK100X_SPI1 is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
++# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
++CONFIG_BOARD_ATSTK1000_EXTDAC=y
++# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
++# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
++CONFIG_LOADER_U_BOOT=y
++
++#
++# Atmel AVR32 AP options
++#
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++# CONFIG_GPIO_DEV is not set
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_DW_DMAC=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_CMDLINE=""
++
++#
++# Power management options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_PNP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++# CONFIG_FW_LOADER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x8000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++# CONFIG_BLK_DEV is not set
++# CONFIG_MISC_DEVICES is not set
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_NETDEVICES is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_RTC is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_VIRTUAL is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_LCD_LTV350QV=y
++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++# CONFIG_LOGO is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++# CONFIG_USB_ZERO is not set
++CONFIG_USB_ETH=y
++# CONFIG_USB_ETH_RNDIS is not set
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FILE_STORAGE is not set
++# CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++# CONFIG_MMC_BLOCK_BOUNCE is not set
++# CONFIG_SDIO_UART is not set
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_ATMELMCI=y
++# CONFIG_MMC_SPI is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++CONFIG_LEDS_GPIO=y
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++# CONFIG_RTC_INTF_PROC is not set
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_INOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_DNOTIFY is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++# CONFIG_JFFS2_FS_WRITEBUFFER is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++# CONFIG_NETWORK_FILESYSTEMS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++# CONFIG_CRYPTO is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff --git a/arch/avr32/drivers/Makefile b/arch/avr32/drivers/Makefile
+new file mode 100644
+index 0000000..b429b75
+--- /dev/null
++++ b/arch/avr32/drivers/Makefile
+@@ -0,0 +1 @@
++obj-$(CONFIG_DW_DMAC) += dw-dmac.o
+diff --git a/arch/avr32/drivers/dw-dmac.c b/arch/avr32/drivers/dw-dmac.c
+new file mode 100644
+index 0000000..224eb30
+--- /dev/null
++++ b/arch/avr32/drivers/dw-dmac.c
+@@ -0,0 +1,761 @@
++/*
++ * Driver for the Synopsys DesignWare DMA Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++
++#include "dw-dmac.h"
++
++#define DMAC_NR_CHANNELS 3
++#define DMAC_MAX_BLOCKSIZE 4095
++
++enum {
++ CH_STATE_FREE = 0,
++ CH_STATE_ALLOCATED,
++ CH_STATE_BUSY,
++};
++
++struct dw_dma_lli {
++ dma_addr_t sar;
++ dma_addr_t dar;
++ dma_addr_t llp;
++ u32 ctllo;
++ u32 ctlhi;
++ u32 sstat;
++ u32 dstat;
++};
++
++struct dw_dma_block {
++ struct dw_dma_lli *lli_vaddr;
++ dma_addr_t lli_dma_addr;
++};
++
++struct dw_dma_channel {
++ unsigned int state;
++ int is_cyclic;
++ struct dma_request_sg *req_sg;
++ struct dma_request_cyclic *req_cyclic;
++ unsigned int nr_blocks;
++ int direction;
++ struct dw_dma_block *block;
++};
++
++struct dw_dma_controller {
++ spinlock_t lock;
++ void * __iomem regs;
++ struct dma_pool *lli_pool;
++ struct clk *hclk;
++ struct dma_controller dma;
++ struct dw_dma_channel channel[DMAC_NR_CHANNELS];
++};
++#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
++
++#define dmac_writel_hi(dmac, reg, value) \
++ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_readl_hi(dmac, reg) \
++ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_writel_lo(dmac, reg, value) \
++ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
++#define dmac_readl_lo(dmac, reg) \
++ __raw_readl((dmac)->regs + DW_DMAC_##reg)
++#define dmac_chan_writel_hi(dmac, chan, reg, value) \
++ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
++ + DW_DMAC_CHAN_##reg + 4))
++#define dmac_chan_readl_hi(dmac, chan, reg) \
++ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
++#define dmac_chan_writel_lo(dmac, chan, reg, value) \
++ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define dmac_chan_readl_lo(dmac, chan, reg) \
++ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define set_channel_bit(dmac, reg, chan) \
++ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
++#define clear_channel_bit(dmac, reg, chan) \
++ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
++
++static int dmac_alloc_channel(struct dma_controller *_dmac)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long flags;
++ int i;
++
++ spin_lock_irqsave(&dmac->lock, flags);
++ for (i = 0; i < DMAC_NR_CHANNELS; i++)
++ if (dmac->channel[i].state == CH_STATE_FREE)
++ break;
++
++ if (i < DMAC_NR_CHANNELS) {
++ chan = &dmac->channel[i];
++ chan->state = CH_STATE_ALLOCATED;
++ } else {
++ i = -EBUSY;
++ }
++
++ spin_unlock_irqrestore(&dmac->lock, flags);
++
++ return i;
++}
++
++static void dmac_release_channel(struct dma_controller *_dmac, int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS
++ || dmac->channel[channel].state != CH_STATE_ALLOCATED);
++
++ dmac->channel[channel].state = CH_STATE_FREE;
++}
++
++static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
++ unsigned int nr_blocks)
++{
++ struct dw_dma_block *block;
++ void *p;
++ unsigned int i;
++
++ block = kmalloc(nr_blocks * sizeof(*block),
++ GFP_KERNEL);
++ if (unlikely(!block))
++ return NULL;
++
++ for (i = 0; i < nr_blocks; i++) {
++ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
++ &block[i].lli_dma_addr);
++ block[i].lli_vaddr = p;
++ if (unlikely(!p))
++ goto fail;
++ }
++
++ return block;
++
++fail:
++ for (i = 0; i < nr_blocks; i++) {
++ if (!block[i].lli_vaddr)
++ break;
++ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
++ block[i].lli_dma_addr);
++ }
++ kfree(block);
++ return NULL;
++}
++
++static void cleanup_channel(struct dw_dma_controller *dmac,
++ struct dw_dma_channel *chan)
++{
++ unsigned int i;
++
++ if (chan->nr_blocks > 1) {
++ for (i = 0; i < chan->nr_blocks; i++)
++ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
++ chan->block[i].lli_dma_addr);
++ kfree(chan->block);
++ }
++
++ chan->state = CH_STATE_ALLOCATED;
++}
++
++static int dmac_prepare_request_sg(struct dma_controller *_dmac,
++ struct dma_request_sg *req)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long ctlhi, ctllo, cfghi, cfglo;
++ unsigned long block_size;
++ unsigned int nr_blocks;
++ int ret, i, direction;
++ unsigned long flags;
++
++ spin_lock_irqsave(&dmac->lock, flags);
++
++ ret = -EINVAL;
++ if (req->req.channel >= DMAC_NR_CHANNELS
++ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++ || req->block_size > DMAC_MAX_BLOCKSIZE) {
++ spin_unlock_irqrestore(&dmac->lock, flags);
++ return -EINVAL;
++ }
++
++ chan = &dmac->channel[req->req.channel];
++ chan->state = CH_STATE_BUSY;
++ chan->req_sg = req;
++ chan->is_cyclic = 0;
++
++ /*
++ * We have marked the channel as busy, so no need to keep the
++ * lock as long as we only touch the channel-specific
++ * registers
++ */
++ spin_unlock_irqrestore(&dmac->lock, flags);
++
++ /*
++ * There may be limitations in the driver and/or the DMA
++ * controller that prevents us from sending a whole
++ * scatterlist item in one go. Taking this into account,
++ * calculate the number of block transfers we need to set up.
++ *
++ * FIXME: Let the peripheral driver know about the maximum
++ * block size we support. We really don't want to use a
++ * different block size than what was suggested by the
++ * peripheral.
++ *
++ * Each block will get its own Linked List Item (LLI) below.
++ */
++ block_size = req->block_size;
++ nr_blocks = req->nr_blocks;
++ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
++ block_size, nr_blocks, req->nr_sg);
++
++ BUG_ON(nr_blocks == 0);
++ chan->nr_blocks = nr_blocks;
++
++ ret = -EINVAL;
++ cfglo = cfghi = 0;
++ switch (req->direction) {
++ case DMA_DIR_MEM_TO_PERIPH:
++ direction = DMA_TO_DEVICE;
++ cfghi = req->periph_id << (43 - 32);
++ break;
++
++ case DMA_DIR_PERIPH_TO_MEM:
++ direction = DMA_FROM_DEVICE;
++ cfghi = req->periph_id << (39 - 32);
++ break;
++ default:
++ goto out_unclaim_channel;
++ }
++
++ chan->direction = direction;
++
++ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++
++ ctlhi = block_size >> req->width;
++ ctllo = ((req->direction << 20)
++ // | (1 << 14) | (1 << 11) // source/dest burst trans len
++ | (req->width << 4) | (req->width << 1)
++ | (1 << 0)); // interrupt enable
++
++ if (nr_blocks == 1) {
++ /* Only one block: No need to use block chaining */
++ if (direction == DMA_TO_DEVICE) {
++ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++ req->sg->dma_address);
++ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++ req->data_reg);
++ ctllo |= 2 << 7; // no dst increment
++ } else {
++ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++ req->data_reg);
++ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++ req->sg->dma_address);
++ ctllo |= 2 << 9; // no src increment
++ }
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
++ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
++ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
++ } else {
++ struct dw_dma_lli *lli, *lli_prev = NULL;
++ int j = 0, offset = 0;
++
++ ret = -ENOMEM;
++ chan->block = allocate_blocks(dmac, nr_blocks);
++ if (!chan->block)
++ goto out_unclaim_channel;
++
++ if (direction == DMA_TO_DEVICE)
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++ else
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++
++ /*
++ * Map scatterlist items to blocks. One scatterlist
++ * item may need more than one block for the reasons
++ * mentioned above.
++ */
++ for (i = 0; i < nr_blocks; i++) {
++ lli = chan->block[i].lli_vaddr;
++ if (lli_prev) {
++ lli_prev->llp = chan->block[i].lli_dma_addr;
++ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr,
++ lli_prev->sar, lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);
++ }
++ lli->llp = 0;
++ lli->ctllo = ctllo;
++ lli->ctlhi = ctlhi;
++ if (direction == DMA_TO_DEVICE) {
++ lli->sar = req->sg[j].dma_address + offset;
++ lli->dar = req->data_reg;
++ } else {
++ lli->sar = req->data_reg;
++ lli->dar = req->sg[j].dma_address + offset;
++ }
++ lli_prev = lli;
++
++ offset += block_size;
++ if (offset > req->sg[j].length) {
++ j++;
++ offset = 0;
++ }
++ }
++
++ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++ lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);
++
++ /*
++ * SAR, DAR and CTL are initialized from the LLI. We
++ * only have to enable the LLI bits in CTL.
++ */
++ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
++ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++ chan->block[0].lli_dma_addr);
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
++ }
++
++ set_channel_bit(dmac, MASK_XFER, req->req.channel);
++ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++ if (req->req.block_complete)
++ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++ else
++ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++
++ return 0;
++
++out_unclaim_channel:
++ chan->state = CH_STATE_ALLOCATED;
++ return ret;
++}
++
++static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
++ struct dma_request_cyclic *req)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long ctlhi, ctllo, cfghi, cfglo;
++ unsigned long block_size;
++ int ret, i, direction;
++ unsigned long flags;
++
++ spin_lock_irqsave(&dmac->lock, flags);
++
++ block_size = (req->buffer_size/req->periods) >> req->width;
++
++ ret = -EINVAL;
++ if (req->req.channel >= DMAC_NR_CHANNELS
++ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++ || (req->periods == 0)
++ || block_size > DMAC_MAX_BLOCKSIZE) {
++ spin_unlock_irqrestore(&dmac->lock, flags);
++ return -EINVAL;
++ }
++
++ chan = &dmac->channel[req->req.channel];
++ chan->state = CH_STATE_BUSY;
++ chan->is_cyclic = 1;
++ chan->req_cyclic = req;
++
++ /*
++ * We have marked the channel as busy, so no need to keep the
++ * lock as long as we only touch the channel-specific
++ * registers
++ */
++ spin_unlock_irqrestore(&dmac->lock, flags);
++
++ /*
++ Setup
++ */
++ BUG_ON(req->buffer_size % req->periods);
++ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
++
++ chan->nr_blocks = req->periods;
++
++ ret = -EINVAL;
++ cfglo = cfghi = 0;
++ switch (req->direction) {
++ case DMA_DIR_MEM_TO_PERIPH:
++ direction = DMA_TO_DEVICE;
++ cfghi = req->periph_id << (43 - 32);
++ break;
++
++ case DMA_DIR_PERIPH_TO_MEM:
++ direction = DMA_FROM_DEVICE;
++ cfghi = req->periph_id << (39 - 32);
++ break;
++ default:
++ goto out_unclaim_channel;
++ }
++
++ chan->direction = direction;
++
++ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++
++ ctlhi = block_size;
++ ctllo = ((req->direction << 20)
++ | (req->width << 4) | (req->width << 1)
++ | (1 << 0)); // interrupt enable
++
++ {
++ struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
++
++ ret = -ENOMEM;
++ chan->block = allocate_blocks(dmac, req->periods);
++ if (!chan->block)
++ goto out_unclaim_channel;
++
++ if (direction == DMA_TO_DEVICE)
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++ else
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++
++ /*
++ * Set up a linked list items where each period gets
++ * an item. The linked list item for the last period
++ * points back to the star of the buffer making a
++ * cyclic buffer.
++ */
++ for (i = 0; i < req->periods; i++) {
++ lli = chan->block[i].lli_vaddr;
++ if (lli_prev) {
++ lli_prev->llp = chan->block[i].lli_dma_addr;
++ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr,
++ lli_prev->sar, lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);*/
++ }
++ lli->llp = 0;
++ lli->ctllo = ctllo;
++ lli->ctlhi = ctlhi;
++ if (direction == DMA_TO_DEVICE) {
++ lli->sar = req->buffer_start + i*(block_size << req->width);
++ lli->dar = req->data_reg;
++ } else {
++ lli->sar = req->data_reg;
++ lli->dar = req->buffer_start + i*(block_size << req->width);
++ }
++ lli_prev = lli;
++ }
++ lli->llp = chan->block[0].lli_dma_addr;
++
++ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++ lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi); */
++
++ /*
++ * SAR, DAR and CTL are initialized from the LLI. We
++ * only have to enable the LLI bits in CTL.
++ */
++ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++ chan->block[0].lli_dma_addr);
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
++ }
++
++ clear_channel_bit(dmac, MASK_XFER, req->req.channel);
++ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++ if (req->req.block_complete)
++ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++ else
++ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++
++ return 0;
++
++out_unclaim_channel:
++ chan->state = CH_STATE_ALLOCATED;
++ return ret;
++}
++
++static int dmac_start_request(struct dma_controller *_dmac,
++ unsigned int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ set_channel_bit(dmac, CH_EN, channel);
++
++ return 0;
++}
++
++static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
++ unsigned int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ dma_addr_t current_pos;
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ chan = &dmac->channel[channel];
++
++ switch (chan->direction) {
++ case DMA_TO_DEVICE:
++ current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
++ break;
++ case DMA_FROM_DEVICE:
++ current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
++ break;
++ default:
++ return 0;
++ }
++
++
++ if (!current_pos) {
++ if (chan->is_cyclic) {
++ current_pos = chan->req_cyclic->buffer_start;
++ } else {
++ current_pos = chan->req_sg->sg->dma_address;
++ }
++ }
++
++ return current_pos;
++}
++
++
++static int dmac_stop_request(struct dma_controller *_dmac,
++ unsigned int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ chan = &dmac->channel[channel];
++ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
++ chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
++ dmac_chan_readl_lo(dmac, channel, DAR),
++ dmac_chan_readl_lo(dmac, channel, LLP),
++ dmac_chan_readl_hi(dmac, channel, CTL),
++ dmac_chan_readl_lo(dmac, channel, CTL));
++
++ if (chan->state == CH_STATE_BUSY) {
++ clear_channel_bit(dmac, CH_EN, channel);
++ cleanup_channel(dmac, &dmac->channel[channel]);
++ }
++
++ return 0;
++}
++
++
++static void dmac_block_complete(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_BLOCK);
++
++ while (status) {
++ struct dma_request *req;
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ if (chan->is_cyclic) {
++ BUG_ON(!chan->req_cyclic
++ || !chan->req_cyclic->req.block_complete);
++ req = &chan->req_cyclic->req;
++ } else {
++ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
++ req = &chan->req_sg->req;
++ }
++ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
++ req->block_complete(req);
++ status = dmac_readl_lo(dmac, STATUS_BLOCK);
++ }
++}
++
++static void dmac_xfer_complete(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ struct dma_request *req;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++
++ while (status) {
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
++
++ req = &chan->req_sg->req;
++ BUG_ON(!req);
++ cleanup_channel(dmac, chan);
++ if (req->xfer_complete)
++ req->xfer_complete(req);
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++ }
++}
++
++static void dmac_error(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_ERROR);
++
++ while (status) {
++ struct dma_request *req;
++
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
++ clear_channel_bit(dmac, CH_EN, chanid);
++
++ if (chan->is_cyclic) {
++ BUG_ON(!chan->req_cyclic);
++ req = &chan->req_cyclic->req;
++ } else {
++ BUG_ON(!chan->req_sg);
++ req = &chan->req_sg->req;
++ }
++
++ cleanup_channel(dmac, chan);
++ if (req->error)
++ req->error(req);
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++ }
++}
++
++static irqreturn_t dmac_interrupt(int irq, void *dev_id)
++{
++ struct dw_dma_controller *dmac = dev_id;
++ unsigned long status;
++ int ret = IRQ_NONE;
++
++ spin_lock(&dmac->lock);
++
++ status = dmac_readl_lo(dmac, STATUS_INT);
++
++ while (status) {
++ ret = IRQ_HANDLED;
++ if (status & 0x10)
++ dmac_error(dmac);
++ if (status & 0x02)
++ dmac_block_complete(dmac);
++ if (status & 0x01)
++ dmac_xfer_complete(dmac);
++
++ status = dmac_readl_lo(dmac, STATUS_INT);
++ }
++
++ spin_unlock(&dmac->lock);
++ return ret;
++}
++
++static int __devinit dmac_probe(struct platform_device *pdev)
++{
++ struct dw_dma_controller *dmac;
++ struct resource *regs;
++ int ret;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++
++ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
++ if (!dmac)
++ return -ENOMEM;
++ memset(dmac, 0, sizeof(*dmac));
++
++ dmac->hclk = clk_get(&pdev->dev, "hclk");
++ if (IS_ERR(dmac->hclk)) {
++ ret = PTR_ERR(dmac->hclk);
++ goto out_free_dmac;
++ }
++ clk_enable(dmac->hclk);
++
++ ret = -ENOMEM;
++ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
++ sizeof(struct dw_dma_lli), 4, 0);
++ if (!dmac->lli_pool)
++ goto out_disable_clk;
++
++ spin_lock_init(&dmac->lock);
++ dmac->dma.dev = &pdev->dev;
++ dmac->dma.alloc_channel = dmac_alloc_channel;
++ dmac->dma.release_channel = dmac_release_channel;
++ dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
++ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
++ dmac->dma.start_request = dmac_start_request;
++ dmac->dma.stop_request = dmac_stop_request;
++ dmac->dma.get_current_pos = dmac_get_current_pos;
++
++ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!dmac->regs)
++ goto out_free_pool;
++
++ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
++ IRQF_SAMPLE_RANDOM, pdev->name, dmac);
++ if (ret)
++ goto out_unmap_regs;
++
++ /* Enable the DMA controller */
++ dmac_writel_lo(dmac, CFG, 1);
++
++ register_dma_controller(&dmac->dma);
++
++ printk(KERN_INFO
++ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
++ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
++
++ return 0;
++
++out_unmap_regs:
++ iounmap(dmac->regs);
++out_free_pool:
++ dma_pool_destroy(dmac->lli_pool);
++out_disable_clk:
++ clk_disable(dmac->hclk);
++ clk_put(dmac->hclk);
++out_free_dmac:
++ kfree(dmac);
++ return ret;
++}
++
++static struct platform_driver dmac_driver = {
++ .probe = dmac_probe,
++ .driver = {
++ .name = "dmaca",
++ },
++};
++
++static int __init dmac_init(void)
++{
++ return platform_driver_register(&dmac_driver);
++}
++subsys_initcall(dmac_init);
++
++static void __exit dmac_exit(void)
++{
++ platform_driver_unregister(&dmac_driver);
++}
++module_exit(dmac_exit);
++
++MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_LICENSE("GPL");
+diff --git a/arch/avr32/drivers/dw-dmac.h b/arch/avr32/drivers/dw-dmac.h
+new file mode 100644
+index 0000000..1f67921
+--- /dev/null
++++ b/arch/avr32/drivers/dw-dmac.h
+@@ -0,0 +1,42 @@
++/*
++ * Driver for the Synopsys DesignWare DMA Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __AVR32_DW_DMAC_H__
++#define __AVR32_DW_DMAC_H__
++
++#define DW_DMAC_CFG 0x398
++#define DW_DMAC_CH_EN 0x3a0
++
++#define DW_DMAC_STATUS_XFER 0x2e8
++#define DW_DMAC_STATUS_BLOCK 0x2f0
++#define DW_DMAC_STATUS_ERROR 0x308
++
++#define DW_DMAC_MASK_XFER 0x310
++#define DW_DMAC_MASK_BLOCK 0x318
++#define DW_DMAC_MASK_ERROR 0x330
++
++#define DW_DMAC_CLEAR_XFER 0x338
++#define DW_DMAC_CLEAR_BLOCK 0x340
++#define DW_DMAC_CLEAR_ERROR 0x358
++
++#define DW_DMAC_STATUS_INT 0x360
++
++#define DW_DMAC_CHAN_SAR 0x000
++#define DW_DMAC_CHAN_DAR 0x008
++#define DW_DMAC_CHAN_LLP 0x010
++#define DW_DMAC_CHAN_CTL 0x018
++#define DW_DMAC_CHAN_SSTAT 0x020
++#define DW_DMAC_CHAN_DSTAT 0x028
++#define DW_DMAC_CHAN_SSTATAR 0x030
++#define DW_DMAC_CHAN_DSTATAR 0x038
++#define DW_DMAC_CHAN_CFG 0x040
++#define DW_DMAC_CHAN_SGR 0x048
++#define DW_DMAC_CHAN_DSR 0x050
++
++#endif /* __AVR32_DW_DMAC_H__ */
+diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile
+index 90e5aff..1aedaeb 100644
+--- a/arch/avr32/kernel/Makefile
++++ b/arch/avr32/kernel/Makefile
+@@ -9,10 +9,6 @@ obj-y += syscall_table.o syscall-stubs.o irq.o
+ obj-y += setup.o traps.o semaphore.o ptrace.o
+ obj-y += signal.o sys_avr32.o process.o time.o
+ obj-y += init_task.o switch_to.o cpu.o
++obj-y += dma-controller.o
+ obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
+ obj-$(CONFIG_KPROBES) += kprobes.o
+-
+-USE_STANDARD_AS_RULE := true
+-
+-%.lds: %.lds.c FORCE
+- $(call if_changed_dep,cpp_lds_S)
+diff --git a/arch/avr32/kernel/dma-controller.c b/arch/avr32/kernel/dma-controller.c
+new file mode 100644
+index 0000000..fb654b3
+--- /dev/null
++++ b/arch/avr32/kernel/dma-controller.c
+@@ -0,0 +1,34 @@
++/*
++ * Preliminary DMA controller framework for AVR32
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <asm/dma-controller.h>
++
++static LIST_HEAD(controllers);
++
++int register_dma_controller(struct dma_controller *dmac)
++{
++ static int next_id;
++
++ dmac->id = next_id++;
++ list_add_tail(&dmac->list, &controllers);
++
++ return 0;
++}
++EXPORT_SYMBOL(register_dma_controller);
++
++struct dma_controller *find_dma_controller(int id)
++{
++ struct dma_controller *dmac;
++
++ list_for_each_entry(dmac, &controllers, list)
++ if (dmac->id == id)
++ return dmac;
++ return NULL;
++}
++EXPORT_SYMBOL(find_dma_controller);
+diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
+index 42657f1..ccadfd9 100644
+--- a/arch/avr32/kernel/entry-avr32b.S
++++ b/arch/avr32/kernel/entry-avr32b.S
+@@ -159,11 +159,18 @@ handle_vmalloc_miss:
+
+ .section .scall.text,"ax",@progbits
+ system_call:
++#ifdef CONFIG_PREEMPT
++ mask_interrupts
++#endif
+ pushm r12 /* r12_orig */
+ stmts --sp, r0-lr
+- zero_fp
++
+ mfsr r0, SYSREG_RAR_SUP
+ mfsr r1, SYSREG_RSR_SUP
++#ifdef CONFIG_PREEMPT
++ unmask_interrupts
++#endif
++ zero_fp
+ stm --sp, r0-r1
+
+ /* check for syscall tracing */
+@@ -638,6 +645,13 @@ irq_level\level:
+ stmts --sp,r0-lr
+ mfsr r8, rar_int\level
+ mfsr r9, rsr_int\level
++
++#ifdef CONFIG_PREEMPT
++ sub r11, pc, (. - system_call)
++ cp.w r11, r8
++ breq 4f
++#endif
++
+ pushm r8-r9
+
+ mov r11, sp
+@@ -668,6 +682,16 @@ irq_level\level:
+ sub sp, -4 /* ignore r12_orig */
+ rete
+
++#ifdef CONFIG_PREEMPT
++4: mask_interrupts
++ mfsr r8, rsr_int\level
++ sbr r8, 16
++ mtsr rsr_int\level, r8
++ ldmts sp++, r0-lr
++ sub sp, -4 /* ignore r12_orig */
++ rete
++#endif
++
+ 2: get_thread_info r0
+ ld.w r1, r0[TI_flags]
+ bld r1, TIF_CPU_GOING_TO_SLEEP
+diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
+index d08b0bc..4b4c188 100644
+--- a/arch/avr32/kernel/setup.c
++++ b/arch/avr32/kernel/setup.c
+@@ -248,7 +248,7 @@ static int __init early_parse_fbmem(char *p)
+
+ fbmem_size = memparse(p, &p);
+ if (*p == '@') {
+- fbmem_start = memparse(p, &p);
++ fbmem_start = memparse(p + 1, &p);
+ ret = add_reserved_region(fbmem_start,
+ fbmem_start + fbmem_size - 1,
+ "Framebuffer");
+diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S
+new file mode 100644
+index 0000000..ce9ac96
+--- /dev/null
++++ b/arch/avr32/kernel/vmlinux.lds.S
+@@ -0,0 +1,143 @@
++/*
++ * AVR32 linker script for the Linux kernel
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#define LOAD_OFFSET 0x00000000
++#include <asm-generic/vmlinux.lds.h>
++#include <asm/cache.h>
++#include <asm/thread_info.h>
++
++OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
++OUTPUT_ARCH(avr32)
++ENTRY(_start)
++
++/* Big endian */
++jiffies = jiffies_64 + 4;
++
++SECTIONS
++{
++ . = CONFIG_ENTRY_ADDRESS;
++ .init : AT(ADDR(.init) - LOAD_OFFSET) {
++ _stext = .;
++ __init_begin = .;
++ _sinittext = .;
++ *(.text.reset)
++ *(.init.text)
++ /*
++ * .exit.text is discarded at runtime, not
++ * link time, to deal with references from
++ * __bug_table
++ */
++ *(.exit.text)
++ _einittext = .;
++ . = ALIGN(4);
++ __tagtable_begin = .;
++ *(.taglist.init)
++ __tagtable_end = .;
++ *(.init.data)
++ . = ALIGN(16);
++ __setup_start = .;
++ *(.init.setup)
++ __setup_end = .;
++ . = ALIGN(4);
++ __initcall_start = .;
++ INITCALLS
++ __initcall_end = .;
++ __con_initcall_start = .;
++ *(.con_initcall.init)
++ __con_initcall_end = .;
++ __security_initcall_start = .;
++ *(.security_initcall.init)
++ __security_initcall_end = .;
++#ifdef CONFIG_BLK_DEV_INITRD
++ . = ALIGN(32);
++ __initramfs_start = .;
++ *(.init.ramfs)
++ __initramfs_end = .;
++#endif
++ . = ALIGN(PAGE_SIZE);
++ __init_end = .;
++ }
++
++ .text : AT(ADDR(.text) - LOAD_OFFSET) {
++ _evba = .;
++ _text = .;
++ *(.ex.text)
++ . = 0x50;
++ *(.tlbx.ex.text)
++ . = 0x60;
++ *(.tlbr.ex.text)
++ . = 0x70;
++ *(.tlbw.ex.text)
++ . = 0x100;
++ *(.scall.text)
++ *(.irq.text)
++ TEXT_TEXT
++ SCHED_TEXT
++ LOCK_TEXT
++ KPROBES_TEXT
++ *(.fixup)
++ *(.gnu.warning)
++ _etext = .;
++ } = 0xd703d703
++
++ . = ALIGN(4);
++ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
++ __start___ex_table = .;
++ *(__ex_table)
++ __stop___ex_table = .;
++ }
++
++ BUG_TABLE
++
++ RODATA
++
++ . = ALIGN(THREAD_SIZE);
++
++ .data : AT(ADDR(.data) - LOAD_OFFSET) {
++ _data = .;
++ _sdata = .;
++ /*
++ * First, the init task union, aligned to an 8K boundary.
++ */
++ *(.data.init_task)
++
++ /* Then, the cacheline aligned data */
++ . = ALIGN(L1_CACHE_BYTES);
++ *(.data.cacheline_aligned)
++
++ /* And the rest... */
++ *(.data.rel*)
++ DATA_DATA
++ CONSTRUCTORS
++
++ _edata = .;
++ }
++
++
++ . = ALIGN(8);
++ .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
++ __bss_start = .;
++ *(.bss)
++ *(COMMON)
++ . = ALIGN(8);
++ __bss_stop = .;
++ _end = .;
++ }
++
++ /* When something in the kernel is NOT compiled as a module, the module
++ * cleanup code and data are put into these segments. Both can then be
++ * thrown away, as cleanup code is never called unless it's a module.
++ */
++ /DISCARD/ : {
++ *(.exit.data)
++ *(.exitcall.exit)
++ }
++
++ DWARF_DEBUG
++}
+diff --git a/arch/avr32/kernel/vmlinux.lds.c b/arch/avr32/kernel/vmlinux.lds.c
+deleted file mode 100644
+index db0438f..0000000
+--- a/arch/avr32/kernel/vmlinux.lds.c
++++ /dev/null
+@@ -1,142 +0,0 @@
+-/*
+- * AVR32 linker script for the Linux kernel
+- *
+- * Copyright (C) 2004-2006 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-#define LOAD_OFFSET 0x00000000
+-#include <asm-generic/vmlinux.lds.h>
+-
+-OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
+-OUTPUT_ARCH(avr32)
+-ENTRY(_start)
+-
+-/* Big endian */
+-jiffies = jiffies_64 + 4;
+-
+-SECTIONS
+-{
+- . = CONFIG_ENTRY_ADDRESS;
+- .init : AT(ADDR(.init) - LOAD_OFFSET) {
+- _stext = .;
+- __init_begin = .;
+- _sinittext = .;
+- *(.text.reset)
+- *(.init.text)
+- /*
+- * .exit.text is discarded at runtime, not
+- * link time, to deal with references from
+- * __bug_table
+- */
+- *(.exit.text)
+- _einittext = .;
+- . = ALIGN(4);
+- __tagtable_begin = .;
+- *(.taglist.init)
+- __tagtable_end = .;
+- *(.init.data)
+- . = ALIGN(16);
+- __setup_start = .;
+- *(.init.setup)
+- __setup_end = .;
+- . = ALIGN(4);
+- __initcall_start = .;
+- INITCALLS
+- __initcall_end = .;
+- __con_initcall_start = .;
+- *(.con_initcall.init)
+- __con_initcall_end = .;
+- __security_initcall_start = .;
+- *(.security_initcall.init)
+- __security_initcall_end = .;
+-#ifdef CONFIG_BLK_DEV_INITRD
+- . = ALIGN(32);
+- __initramfs_start = .;
+- *(.init.ramfs)
+- __initramfs_end = .;
+-#endif
+- . = ALIGN(4096);
+- __init_end = .;
+- }
+-
+- . = ALIGN(8192);
+- .text : AT(ADDR(.text) - LOAD_OFFSET) {
+- _evba = .;
+- _text = .;
+- *(.ex.text)
+- . = 0x50;
+- *(.tlbx.ex.text)
+- . = 0x60;
+- *(.tlbr.ex.text)
+- . = 0x70;
+- *(.tlbw.ex.text)
+- . = 0x100;
+- *(.scall.text)
+- *(.irq.text)
+- TEXT_TEXT
+- SCHED_TEXT
+- LOCK_TEXT
+- KPROBES_TEXT
+- *(.fixup)
+- *(.gnu.warning)
+- _etext = .;
+- } = 0xd703d703
+-
+- . = ALIGN(4);
+- __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
+- __start___ex_table = .;
+- *(__ex_table)
+- __stop___ex_table = .;
+- }
+-
+- BUG_TABLE
+-
+- RODATA
+-
+- . = ALIGN(8192);
+-
+- .data : AT(ADDR(.data) - LOAD_OFFSET) {
+- _data = .;
+- _sdata = .;
+- /*
+- * First, the init task union, aligned to an 8K boundary.
+- */
+- *(.data.init_task)
+-
+- /* Then, the cacheline aligned data */
+- . = ALIGN(32);
+- *(.data.cacheline_aligned)
+-
+- /* And the rest... */
+- *(.data.rel*)
+- DATA_DATA
+- CONSTRUCTORS
+-
+- _edata = .;
+- }
+-
+-
+- . = ALIGN(8);
+- .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
+- __bss_start = .;
+- *(.bss)
+- *(COMMON)
+- . = ALIGN(8);
+- __bss_stop = .;
+- _end = .;
+- }
+-
+- /* When something in the kernel is NOT compiled as a module, the module
+- * cleanup code and data are put into these segments. Both can then be
+- * thrown away, as cleanup code is never called unless it's a module.
+- */
+- /DISCARD/ : {
+- *(.exit.data)
+- *(.exitcall.exit)
+- }
+-
+- DWARF_DEBUG
+-}
+diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig
+index eb30783..0eb590a 100644
+--- a/arch/avr32/mach-at32ap/Kconfig
++++ b/arch/avr32/mach-at32ap/Kconfig
+@@ -3,9 +3,9 @@ if PLATFORM_AT32AP
+ menu "Atmel AVR32 AP options"
+
+ choice
+- prompt "AT32AP7000 static memory bus width"
+- depends on CPU_AT32AP7000
+- default AP7000_16_BIT_SMC
++ prompt "AT32AP700x static memory bus width"
++ depends on CPU_AT32AP700X
++ default AP700X_16_BIT_SMC
+ help
+ Define the width of the AP7000 external static memory interface.
+ This is used to determine how to mangle the address and/or data
+@@ -15,17 +15,24 @@ choice
+ width for all chip selects, excluding the flash (which is using
+ raw access and is thus not affected by any of this.)
+
+-config AP7000_32_BIT_SMC
++config AP700X_32_BIT_SMC
+ bool "32 bit"
+
+-config AP7000_16_BIT_SMC
++config AP700X_16_BIT_SMC
+ bool "16 bit"
+
+-config AP7000_8_BIT_SMC
++config AP700X_8_BIT_SMC
+ bool "8 bit"
+
+ endchoice
+
++config GPIO_DEV
++ bool "GPIO /dev interface"
++ select CONFIGFS_FS
++ default n
++ help
++ Say `Y' to enable a /dev interface to the GPIO pins.
++
+ endmenu
+
+ endif # PLATFORM_AT32AP
+diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
+index a8b4450..0f6162e 100644
+--- a/arch/avr32/mach-at32ap/Makefile
++++ b/arch/avr32/mach-at32ap/Makefile
+@@ -1,4 +1,5 @@
+ obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
+-obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o
+-obj-$(CONFIG_CPU_AT32AP7000) += time-tc.o
++obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o
++obj-$(CONFIG_CPU_AT32AP700X) += time-tc.o
+ obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
++obj-$(CONFIG_GPIO_DEV) += gpio-dev.o
+diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
+deleted file mode 100644
+index 64cc558..0000000
+--- a/arch/avr32/mach-at32ap/at32ap7000.c
++++ /dev/null
+@@ -1,1324 +0,0 @@
+-/*
+- * Copyright (C) 2005-2006 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-#include <linux/clk.h>
+-#include <linux/fb.h>
+-#include <linux/init.h>
+-#include <linux/platform_device.h>
+-#include <linux/dma-mapping.h>
+-#include <linux/spi/spi.h>
+-
+-#include <asm/io.h>
+-
+-#include <asm/arch/at32ap7000.h>
+-#include <asm/arch/board.h>
+-#include <asm/arch/portmux.h>
+-
+-#include <video/atmel_lcdc.h>
+-
+-#include "clock.h"
+-#include "hmatrix.h"
+-#include "pio.h"
+-#include "pm.h"
+-
+-/*
+- * We can reduce the code size a bit by using a constant here. Since
+- * this file is completely chip-specific, it's safe to not use
+- * ioremap. Generic drivers should of course never do this.
+- */
+-#define AT32_PM_BASE 0xfff00000
+-
+-#define PBMEM(base) \
+- { \
+- .start = base, \
+- .end = base + 0x3ff, \
+- .flags = IORESOURCE_MEM, \
+- }
+-#define IRQ(num) \
+- { \
+- .start = num, \
+- .end = num, \
+- .flags = IORESOURCE_IRQ, \
+- }
+-#define NAMED_IRQ(num, _name) \
+- { \
+- .start = num, \
+- .end = num, \
+- .name = _name, \
+- .flags = IORESOURCE_IRQ, \
+- }
+-
+-/* REVISIT these assume *every* device supports DMA, but several
+- * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
+- */
+-#define DEFINE_DEV(_name, _id) \
+-static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
+-static struct platform_device _name##_id##_device = { \
+- .name = #_name, \
+- .id = _id, \
+- .dev = { \
+- .dma_mask = &_name##_id##_dma_mask, \
+- .coherent_dma_mask = DMA_32BIT_MASK, \
+- }, \
+- .resource = _name##_id##_resource, \
+- .num_resources = ARRAY_SIZE(_name##_id##_resource), \
+-}
+-#define DEFINE_DEV_DATA(_name, _id) \
+-static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
+-static struct platform_device _name##_id##_device = { \
+- .name = #_name, \
+- .id = _id, \
+- .dev = { \
+- .dma_mask = &_name##_id##_dma_mask, \
+- .platform_data = &_name##_id##_data, \
+- .coherent_dma_mask = DMA_32BIT_MASK, \
+- }, \
+- .resource = _name##_id##_resource, \
+- .num_resources = ARRAY_SIZE(_name##_id##_resource), \
+-}
+-
+-#define select_peripheral(pin, periph, flags) \
+- at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
+-
+-#define DEV_CLK(_name, devname, bus, _index) \
+-static struct clk devname##_##_name = { \
+- .name = #_name, \
+- .dev = &devname##_device.dev, \
+- .parent = &bus##_clk, \
+- .mode = bus##_clk_mode, \
+- .get_rate = bus##_clk_get_rate, \
+- .index = _index, \
+-}
+-
+-static DEFINE_SPINLOCK(pm_lock);
+-
+-unsigned long at32ap7000_osc_rates[3] = {
+- [0] = 32768,
+- /* FIXME: these are ATSTK1002-specific */
+- [1] = 20000000,
+- [2] = 12000000,
+-};
+-
+-static unsigned long osc_get_rate(struct clk *clk)
+-{
+- return at32ap7000_osc_rates[clk->index];
+-}
+-
+-static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
+-{
+- unsigned long div, mul, rate;
+-
+- if (!(control & PM_BIT(PLLEN)))
+- return 0;
+-
+- div = PM_BFEXT(PLLDIV, control) + 1;
+- mul = PM_BFEXT(PLLMUL, control) + 1;
+-
+- rate = clk->parent->get_rate(clk->parent);
+- rate = (rate + div / 2) / div;
+- rate *= mul;
+-
+- return rate;
+-}
+-
+-static unsigned long pll0_get_rate(struct clk *clk)
+-{
+- u32 control;
+-
+- control = pm_readl(PLL0);
+-
+- return pll_get_rate(clk, control);
+-}
+-
+-static unsigned long pll1_get_rate(struct clk *clk)
+-{
+- u32 control;
+-
+- control = pm_readl(PLL1);
+-
+- return pll_get_rate(clk, control);
+-}
+-
+-/*
+- * The AT32AP7000 has five primary clock sources: One 32kHz
+- * oscillator, two crystal oscillators and two PLLs.
+- */
+-static struct clk osc32k = {
+- .name = "osc32k",
+- .get_rate = osc_get_rate,
+- .users = 1,
+- .index = 0,
+-};
+-static struct clk osc0 = {
+- .name = "osc0",
+- .get_rate = osc_get_rate,
+- .users = 1,
+- .index = 1,
+-};
+-static struct clk osc1 = {
+- .name = "osc1",
+- .get_rate = osc_get_rate,
+- .index = 2,
+-};
+-static struct clk pll0 = {
+- .name = "pll0",
+- .get_rate = pll0_get_rate,
+- .parent = &osc0,
+-};
+-static struct clk pll1 = {
+- .name = "pll1",
+- .get_rate = pll1_get_rate,
+- .parent = &osc0,
+-};
+-
+-/*
+- * The main clock can be either osc0 or pll0. The boot loader may
+- * have chosen one for us, so we don't really know which one until we
+- * have a look at the SM.
+- */
+-static struct clk *main_clock;
+-
+-/*
+- * Synchronous clocks are generated from the main clock. The clocks
+- * must satisfy the constraint
+- * fCPU >= fHSB >= fPB
+- * i.e. each clock must not be faster than its parent.
+- */
+-static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
+-{
+- return main_clock->get_rate(main_clock) >> shift;
+-};
+-
+-static void cpu_clk_mode(struct clk *clk, int enabled)
+-{
+- unsigned long flags;
+- u32 mask;
+-
+- spin_lock_irqsave(&pm_lock, flags);
+- mask = pm_readl(CPU_MASK);
+- if (enabled)
+- mask |= 1 << clk->index;
+- else
+- mask &= ~(1 << clk->index);
+- pm_writel(CPU_MASK, mask);
+- spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long cpu_clk_get_rate(struct clk *clk)
+-{
+- unsigned long cksel, shift = 0;
+-
+- cksel = pm_readl(CKSEL);
+- if (cksel & PM_BIT(CPUDIV))
+- shift = PM_BFEXT(CPUSEL, cksel) + 1;
+-
+- return bus_clk_get_rate(clk, shift);
+-}
+-
+-static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
+-{
+- u32 control;
+- unsigned long parent_rate, child_div, actual_rate, div;
+-
+- parent_rate = clk->parent->get_rate(clk->parent);
+- control = pm_readl(CKSEL);
+-
+- if (control & PM_BIT(HSBDIV))
+- child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
+- else
+- child_div = 1;
+-
+- if (rate > 3 * (parent_rate / 4) || child_div == 1) {
+- actual_rate = parent_rate;
+- control &= ~PM_BIT(CPUDIV);
+- } else {
+- unsigned int cpusel;
+- div = (parent_rate + rate / 2) / rate;
+- if (div > child_div)
+- div = child_div;
+- cpusel = (div > 1) ? (fls(div) - 2) : 0;
+- control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
+- actual_rate = parent_rate / (1 << (cpusel + 1));
+- }
+-
+- pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
+- clk->name, rate, actual_rate);
+-
+- if (apply)
+- pm_writel(CKSEL, control);
+-
+- return actual_rate;
+-}
+-
+-static void hsb_clk_mode(struct clk *clk, int enabled)
+-{
+- unsigned long flags;
+- u32 mask;
+-
+- spin_lock_irqsave(&pm_lock, flags);
+- mask = pm_readl(HSB_MASK);
+- if (enabled)
+- mask |= 1 << clk->index;
+- else
+- mask &= ~(1 << clk->index);
+- pm_writel(HSB_MASK, mask);
+- spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long hsb_clk_get_rate(struct clk *clk)
+-{
+- unsigned long cksel, shift = 0;
+-
+- cksel = pm_readl(CKSEL);
+- if (cksel & PM_BIT(HSBDIV))
+- shift = PM_BFEXT(HSBSEL, cksel) + 1;
+-
+- return bus_clk_get_rate(clk, shift);
+-}
+-
+-static void pba_clk_mode(struct clk *clk, int enabled)
+-{
+- unsigned long flags;
+- u32 mask;
+-
+- spin_lock_irqsave(&pm_lock, flags);
+- mask = pm_readl(PBA_MASK);
+- if (enabled)
+- mask |= 1 << clk->index;
+- else
+- mask &= ~(1 << clk->index);
+- pm_writel(PBA_MASK, mask);
+- spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long pba_clk_get_rate(struct clk *clk)
+-{
+- unsigned long cksel, shift = 0;
+-
+- cksel = pm_readl(CKSEL);
+- if (cksel & PM_BIT(PBADIV))
+- shift = PM_BFEXT(PBASEL, cksel) + 1;
+-
+- return bus_clk_get_rate(clk, shift);
+-}
+-
+-static void pbb_clk_mode(struct clk *clk, int enabled)
+-{
+- unsigned long flags;
+- u32 mask;
+-
+- spin_lock_irqsave(&pm_lock, flags);
+- mask = pm_readl(PBB_MASK);
+- if (enabled)
+- mask |= 1 << clk->index;
+- else
+- mask &= ~(1 << clk->index);
+- pm_writel(PBB_MASK, mask);
+- spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long pbb_clk_get_rate(struct clk *clk)
+-{
+- unsigned long cksel, shift = 0;
+-
+- cksel = pm_readl(CKSEL);
+- if (cksel & PM_BIT(PBBDIV))
+- shift = PM_BFEXT(PBBSEL, cksel) + 1;
+-
+- return bus_clk_get_rate(clk, shift);
+-}
+-
+-static struct clk cpu_clk = {
+- .name = "cpu",
+- .get_rate = cpu_clk_get_rate,
+- .set_rate = cpu_clk_set_rate,
+- .users = 1,
+-};
+-static struct clk hsb_clk = {
+- .name = "hsb",
+- .parent = &cpu_clk,
+- .get_rate = hsb_clk_get_rate,
+-};
+-static struct clk pba_clk = {
+- .name = "pba",
+- .parent = &hsb_clk,
+- .mode = hsb_clk_mode,
+- .get_rate = pba_clk_get_rate,
+- .index = 1,
+-};
+-static struct clk pbb_clk = {
+- .name = "pbb",
+- .parent = &hsb_clk,
+- .mode = hsb_clk_mode,
+- .get_rate = pbb_clk_get_rate,
+- .users = 1,
+- .index = 2,
+-};
+-
+-/* --------------------------------------------------------------------
+- * Generic Clock operations
+- * -------------------------------------------------------------------- */
+-
+-static void genclk_mode(struct clk *clk, int enabled)
+-{
+- u32 control;
+-
+- control = pm_readl(GCCTRL(clk->index));
+- if (enabled)
+- control |= PM_BIT(CEN);
+- else
+- control &= ~PM_BIT(CEN);
+- pm_writel(GCCTRL(clk->index), control);
+-}
+-
+-static unsigned long genclk_get_rate(struct clk *clk)
+-{
+- u32 control;
+- unsigned long div = 1;
+-
+- control = pm_readl(GCCTRL(clk->index));
+- if (control & PM_BIT(DIVEN))
+- div = 2 * (PM_BFEXT(DIV, control) + 1);
+-
+- return clk->parent->get_rate(clk->parent) / div;
+-}
+-
+-static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
+-{
+- u32 control;
+- unsigned long parent_rate, actual_rate, div;
+-
+- parent_rate = clk->parent->get_rate(clk->parent);
+- control = pm_readl(GCCTRL(clk->index));
+-
+- if (rate > 3 * parent_rate / 4) {
+- actual_rate = parent_rate;
+- control &= ~PM_BIT(DIVEN);
+- } else {
+- div = (parent_rate + rate) / (2 * rate) - 1;
+- control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
+- actual_rate = parent_rate / (2 * (div + 1));
+- }
+-
+- dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
+- clk->name, rate, actual_rate);
+-
+- if (apply)
+- pm_writel(GCCTRL(clk->index), control);
+-
+- return actual_rate;
+-}
+-
+-int genclk_set_parent(struct clk *clk, struct clk *parent)
+-{
+- u32 control;
+-
+- dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
+- clk->name, parent->name, clk->parent->name);
+-
+- control = pm_readl(GCCTRL(clk->index));
+-
+- if (parent == &osc1 || parent == &pll1)
+- control |= PM_BIT(OSCSEL);
+- else if (parent == &osc0 || parent == &pll0)
+- control &= ~PM_BIT(OSCSEL);
+- else
+- return -EINVAL;
+-
+- if (parent == &pll0 || parent == &pll1)
+- control |= PM_BIT(PLLSEL);
+- else
+- control &= ~PM_BIT(PLLSEL);
+-
+- pm_writel(GCCTRL(clk->index), control);
+- clk->parent = parent;
+-
+- return 0;
+-}
+-
+-static void __init genclk_init_parent(struct clk *clk)
+-{
+- u32 control;
+- struct clk *parent;
+-
+- BUG_ON(clk->index > 7);
+-
+- control = pm_readl(GCCTRL(clk->index));
+- if (control & PM_BIT(OSCSEL))
+- parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
+- else
+- parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
+-
+- clk->parent = parent;
+-}
+-
+-/* --------------------------------------------------------------------
+- * System peripherals
+- * -------------------------------------------------------------------- */
+-static struct resource at32_pm0_resource[] = {
+- {
+- .start = 0xfff00000,
+- .end = 0xfff0007f,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(20),
+-};
+-
+-static struct resource at32ap700x_rtc0_resource[] = {
+- {
+- .start = 0xfff00080,
+- .end = 0xfff000af,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(21),
+-};
+-
+-static struct resource at32_wdt0_resource[] = {
+- {
+- .start = 0xfff000b0,
+- .end = 0xfff000bf,
+- .flags = IORESOURCE_MEM,
+- },
+-};
+-
+-static struct resource at32_eic0_resource[] = {
+- {
+- .start = 0xfff00100,
+- .end = 0xfff0013f,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(19),
+-};
+-
+-DEFINE_DEV(at32_pm, 0);
+-DEFINE_DEV(at32ap700x_rtc, 0);
+-DEFINE_DEV(at32_wdt, 0);
+-DEFINE_DEV(at32_eic, 0);
+-
+-/*
+- * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
+- * is always running.
+- */
+-static struct clk at32_pm_pclk = {
+- .name = "pclk",
+- .dev = &at32_pm0_device.dev,
+- .parent = &pbb_clk,
+- .mode = pbb_clk_mode,
+- .get_rate = pbb_clk_get_rate,
+- .users = 1,
+- .index = 0,
+-};
+-
+-static struct resource intc0_resource[] = {
+- PBMEM(0xfff00400),
+-};
+-struct platform_device at32_intc0_device = {
+- .name = "intc",
+- .id = 0,
+- .resource = intc0_resource,
+- .num_resources = ARRAY_SIZE(intc0_resource),
+-};
+-DEV_CLK(pclk, at32_intc0, pbb, 1);
+-
+-static struct clk ebi_clk = {
+- .name = "ebi",
+- .parent = &hsb_clk,
+- .mode = hsb_clk_mode,
+- .get_rate = hsb_clk_get_rate,
+- .users = 1,
+-};
+-static struct clk hramc_clk = {
+- .name = "hramc",
+- .parent = &hsb_clk,
+- .mode = hsb_clk_mode,
+- .get_rate = hsb_clk_get_rate,
+- .users = 1,
+- .index = 3,
+-};
+-
+-static struct resource smc0_resource[] = {
+- PBMEM(0xfff03400),
+-};
+-DEFINE_DEV(smc, 0);
+-DEV_CLK(pclk, smc0, pbb, 13);
+-DEV_CLK(mck, smc0, hsb, 0);
+-
+-static struct platform_device pdc_device = {
+- .name = "pdc",
+- .id = 0,
+-};
+-DEV_CLK(hclk, pdc, hsb, 4);
+-DEV_CLK(pclk, pdc, pba, 16);
+-
+-static struct clk pico_clk = {
+- .name = "pico",
+- .parent = &cpu_clk,
+- .mode = cpu_clk_mode,
+- .get_rate = cpu_clk_get_rate,
+- .users = 1,
+-};
+-
+-/* --------------------------------------------------------------------
+- * HMATRIX
+- * -------------------------------------------------------------------- */
+-
+-static struct clk hmatrix_clk = {
+- .name = "hmatrix_clk",
+- .parent = &pbb_clk,
+- .mode = pbb_clk_mode,
+- .get_rate = pbb_clk_get_rate,
+- .index = 2,
+- .users = 1,
+-};
+-#define HMATRIX_BASE ((void __iomem *)0xfff00800)
+-
+-#define hmatrix_readl(reg) \
+- __raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
+-#define hmatrix_writel(reg,value) \
+- __raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
+-
+-/*
+- * Set bits in the HMATRIX Special Function Register (SFR) used by the
+- * External Bus Interface (EBI). This can be used to enable special
+- * features like CompactFlash support, NAND Flash support, etc. on
+- * certain chipselects.
+- */
+-static inline void set_ebi_sfr_bits(u32 mask)
+-{
+- u32 sfr;
+-
+- clk_enable(&hmatrix_clk);
+- sfr = hmatrix_readl(SFR4);
+- sfr |= mask;
+- hmatrix_writel(SFR4, sfr);
+- clk_disable(&hmatrix_clk);
+-}
+-
+-/* --------------------------------------------------------------------
+- * System Timer/Counter (TC)
+- * -------------------------------------------------------------------- */
+-static struct resource at32_systc0_resource[] = {
+- PBMEM(0xfff00c00),
+- IRQ(22),
+-};
+-struct platform_device at32_systc0_device = {
+- .name = "systc",
+- .id = 0,
+- .resource = at32_systc0_resource,
+- .num_resources = ARRAY_SIZE(at32_systc0_resource),
+-};
+-DEV_CLK(pclk, at32_systc0, pbb, 3);
+-
+-/* --------------------------------------------------------------------
+- * PIO
+- * -------------------------------------------------------------------- */
+-
+-static struct resource pio0_resource[] = {
+- PBMEM(0xffe02800),
+- IRQ(13),
+-};
+-DEFINE_DEV(pio, 0);
+-DEV_CLK(mck, pio0, pba, 10);
+-
+-static struct resource pio1_resource[] = {
+- PBMEM(0xffe02c00),
+- IRQ(14),
+-};
+-DEFINE_DEV(pio, 1);
+-DEV_CLK(mck, pio1, pba, 11);
+-
+-static struct resource pio2_resource[] = {
+- PBMEM(0xffe03000),
+- IRQ(15),
+-};
+-DEFINE_DEV(pio, 2);
+-DEV_CLK(mck, pio2, pba, 12);
+-
+-static struct resource pio3_resource[] = {
+- PBMEM(0xffe03400),
+- IRQ(16),
+-};
+-DEFINE_DEV(pio, 3);
+-DEV_CLK(mck, pio3, pba, 13);
+-
+-static struct resource pio4_resource[] = {
+- PBMEM(0xffe03800),
+- IRQ(17),
+-};
+-DEFINE_DEV(pio, 4);
+-DEV_CLK(mck, pio4, pba, 14);
+-
+-void __init at32_add_system_devices(void)
+-{
+- platform_device_register(&at32_pm0_device);
+- platform_device_register(&at32_intc0_device);
+- platform_device_register(&at32ap700x_rtc0_device);
+- platform_device_register(&at32_wdt0_device);
+- platform_device_register(&at32_eic0_device);
+- platform_device_register(&smc0_device);
+- platform_device_register(&pdc_device);
+-
+- platform_device_register(&at32_systc0_device);
+-
+- platform_device_register(&pio0_device);
+- platform_device_register(&pio1_device);
+- platform_device_register(&pio2_device);
+- platform_device_register(&pio3_device);
+- platform_device_register(&pio4_device);
+-}
+-
+-/* --------------------------------------------------------------------
+- * USART
+- * -------------------------------------------------------------------- */
+-
+-static struct atmel_uart_data atmel_usart0_data = {
+- .use_dma_tx = 1,
+- .use_dma_rx = 1,
+-};
+-static struct resource atmel_usart0_resource[] = {
+- PBMEM(0xffe00c00),
+- IRQ(6),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 0);
+-DEV_CLK(usart, atmel_usart0, pba, 4);
+-
+-static struct atmel_uart_data atmel_usart1_data = {
+- .use_dma_tx = 1,
+- .use_dma_rx = 1,
+-};
+-static struct resource atmel_usart1_resource[] = {
+- PBMEM(0xffe01000),
+- IRQ(7),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 1);
+-DEV_CLK(usart, atmel_usart1, pba, 4);
+-
+-static struct atmel_uart_data atmel_usart2_data = {
+- .use_dma_tx = 1,
+- .use_dma_rx = 1,
+-};
+-static struct resource atmel_usart2_resource[] = {
+- PBMEM(0xffe01400),
+- IRQ(8),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 2);
+-DEV_CLK(usart, atmel_usart2, pba, 5);
+-
+-static struct atmel_uart_data atmel_usart3_data = {
+- .use_dma_tx = 1,
+- .use_dma_rx = 1,
+-};
+-static struct resource atmel_usart3_resource[] = {
+- PBMEM(0xffe01800),
+- IRQ(9),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 3);
+-DEV_CLK(usart, atmel_usart3, pba, 6);
+-
+-static inline void configure_usart0_pins(void)
+-{
+- select_peripheral(PA(8), PERIPH_B, 0); /* RXD */
+- select_peripheral(PA(9), PERIPH_B, 0); /* TXD */
+-}
+-
+-static inline void configure_usart1_pins(void)
+-{
+- select_peripheral(PA(17), PERIPH_A, 0); /* RXD */
+- select_peripheral(PA(18), PERIPH_A, 0); /* TXD */
+-}
+-
+-static inline void configure_usart2_pins(void)
+-{
+- select_peripheral(PB(26), PERIPH_B, 0); /* RXD */
+- select_peripheral(PB(27), PERIPH_B, 0); /* TXD */
+-}
+-
+-static inline void configure_usart3_pins(void)
+-{
+- select_peripheral(PB(18), PERIPH_B, 0); /* RXD */
+- select_peripheral(PB(17), PERIPH_B, 0); /* TXD */
+-}
+-
+-static struct platform_device *__initdata at32_usarts[4];
+-
+-void __init at32_map_usart(unsigned int hw_id, unsigned int line)
+-{
+- struct platform_device *pdev;
+-
+- switch (hw_id) {
+- case 0:
+- pdev = &atmel_usart0_device;
+- configure_usart0_pins();
+- break;
+- case 1:
+- pdev = &atmel_usart1_device;
+- configure_usart1_pins();
+- break;
+- case 2:
+- pdev = &atmel_usart2_device;
+- configure_usart2_pins();
+- break;
+- case 3:
+- pdev = &atmel_usart3_device;
+- configure_usart3_pins();
+- break;
+- default:
+- return;
+- }
+-
+- if (PXSEG(pdev->resource[0].start) == P4SEG) {
+- /* Addresses in the P4 segment are permanently mapped 1:1 */
+- struct atmel_uart_data *data = pdev->dev.platform_data;
+- data->regs = (void __iomem *)pdev->resource[0].start;
+- }
+-
+- pdev->id = line;
+- at32_usarts[line] = pdev;
+-}
+-
+-struct platform_device *__init at32_add_device_usart(unsigned int id)
+-{
+- platform_device_register(at32_usarts[id]);
+- return at32_usarts[id];
+-}
+-
+-struct platform_device *atmel_default_console_device;
+-
+-void __init at32_setup_serial_console(unsigned int usart_id)
+-{
+- atmel_default_console_device = at32_usarts[usart_id];
+-}
+-
+-/* --------------------------------------------------------------------
+- * Ethernet
+- * -------------------------------------------------------------------- */
+-
+-static struct eth_platform_data macb0_data;
+-static struct resource macb0_resource[] = {
+- PBMEM(0xfff01800),
+- IRQ(25),
+-};
+-DEFINE_DEV_DATA(macb, 0);
+-DEV_CLK(hclk, macb0, hsb, 8);
+-DEV_CLK(pclk, macb0, pbb, 6);
+-
+-static struct eth_platform_data macb1_data;
+-static struct resource macb1_resource[] = {
+- PBMEM(0xfff01c00),
+- IRQ(26),
+-};
+-DEFINE_DEV_DATA(macb, 1);
+-DEV_CLK(hclk, macb1, hsb, 9);
+-DEV_CLK(pclk, macb1, pbb, 7);
+-
+-struct platform_device *__init
+-at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
+-{
+- struct platform_device *pdev;
+-
+- switch (id) {
+- case 0:
+- pdev = &macb0_device;
+-
+- select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */
+- select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */
+- select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */
+- select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */
+- select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */
+- select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */
+- select_peripheral(PC(13), PERIPH_A, 0); /* RXER */
+- select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */
+- select_peripheral(PC(16), PERIPH_A, 0); /* MDC */
+- select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */
+-
+- if (!data->is_rmii) {
+- select_peripheral(PC(0), PERIPH_A, 0); /* COL */
+- select_peripheral(PC(1), PERIPH_A, 0); /* CRS */
+- select_peripheral(PC(2), PERIPH_A, 0); /* TXER */
+- select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */
+- select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */
+- select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */
+- select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */
+- select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */
+- select_peripheral(PC(18), PERIPH_A, 0); /* SPD */
+- }
+- break;
+-
+- case 1:
+- pdev = &macb1_device;
+-
+- select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */
+- select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */
+- select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */
+- select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */
+- select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */
+- select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */
+- select_peripheral(PD(5), PERIPH_B, 0); /* RXER */
+- select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */
+- select_peripheral(PD(3), PERIPH_B, 0); /* MDC */
+- select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */
+-
+- if (!data->is_rmii) {
+- select_peripheral(PC(19), PERIPH_B, 0); /* COL */
+- select_peripheral(PC(23), PERIPH_B, 0); /* CRS */
+- select_peripheral(PC(26), PERIPH_B, 0); /* TXER */
+- select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */
+- select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */
+- select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */
+- select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */
+- select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */
+- select_peripheral(PD(15), PERIPH_B, 0); /* SPD */
+- }
+- break;
+-
+- default:
+- return NULL;
+- }
+-
+- memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
+- platform_device_register(pdev);
+-
+- return pdev;
+-}
+-
+-/* --------------------------------------------------------------------
+- * SPI
+- * -------------------------------------------------------------------- */
+-static struct resource atmel_spi0_resource[] = {
+- PBMEM(0xffe00000),
+- IRQ(3),
+-};
+-DEFINE_DEV(atmel_spi, 0);
+-DEV_CLK(spi_clk, atmel_spi0, pba, 0);
+-
+-static struct resource atmel_spi1_resource[] = {
+- PBMEM(0xffe00400),
+- IRQ(4),
+-};
+-DEFINE_DEV(atmel_spi, 1);
+-DEV_CLK(spi_clk, atmel_spi1, pba, 1);
+-
+-static void __init
+-at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
+- unsigned int n, const u8 *pins)
+-{
+- unsigned int pin, mode;
+-
+- for (; n; n--, b++) {
+- b->bus_num = bus_num;
+- if (b->chip_select >= 4)
+- continue;
+- pin = (unsigned)b->controller_data;
+- if (!pin) {
+- pin = pins[b->chip_select];
+- b->controller_data = (void *)pin;
+- }
+- mode = AT32_GPIOF_OUTPUT;
+- if (!(b->mode & SPI_CS_HIGH))
+- mode |= AT32_GPIOF_HIGH;
+- at32_select_gpio(pin, mode);
+- }
+-}
+-
+-struct platform_device *__init
+-at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+-{
+- /*
+- * Manage the chipselects as GPIOs, normally using the same pins
+- * the SPI controller expects; but boards can use other pins.
+- */
+- static u8 __initdata spi0_pins[] =
+- { GPIO_PIN_PA(3), GPIO_PIN_PA(4),
+- GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
+- static u8 __initdata spi1_pins[] =
+- { GPIO_PIN_PB(2), GPIO_PIN_PB(3),
+- GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
+- struct platform_device *pdev;
+-
+- switch (id) {
+- case 0:
+- pdev = &atmel_spi0_device;
+- select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
+- select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
+- select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
+- at32_spi_setup_slaves(0, b, n, spi0_pins);
+- break;
+-
+- case 1:
+- pdev = &atmel_spi1_device;
+- select_peripheral(PB(0), PERIPH_B, 0); /* MISO */
+- select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
+- select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
+- at32_spi_setup_slaves(1, b, n, spi1_pins);
+- break;
+-
+- default:
+- return NULL;
+- }
+-
+- spi_register_board_info(b, n);
+- platform_device_register(pdev);
+- return pdev;
+-}
+-
+-/* --------------------------------------------------------------------
+- * LCDC
+- * -------------------------------------------------------------------- */
+-static struct atmel_lcdfb_info atmel_lcdfb0_data;
+-static struct resource atmel_lcdfb0_resource[] = {
+- {
+- .start = 0xff000000,
+- .end = 0xff000fff,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(1),
+- {
+- /* Placeholder for pre-allocated fb memory */
+- .start = 0x00000000,
+- .end = 0x00000000,
+- .flags = 0,
+- },
+-};
+-DEFINE_DEV_DATA(atmel_lcdfb, 0);
+-DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
+-static struct clk atmel_lcdfb0_pixclk = {
+- .name = "lcdc_clk",
+- .dev = &atmel_lcdfb0_device.dev,
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 7,
+-};
+-
+-struct platform_device *__init
+-at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+- unsigned long fbmem_start, unsigned long fbmem_len)
+-{
+- struct platform_device *pdev;
+- struct atmel_lcdfb_info *info;
+- struct fb_monspecs *monspecs;
+- struct fb_videomode *modedb;
+- unsigned int modedb_size;
+-
+- /*
+- * Do a deep copy of the fb data, monspecs and modedb. Make
+- * sure all allocations are done before setting up the
+- * portmux.
+- */
+- monspecs = kmemdup(data->default_monspecs,
+- sizeof(struct fb_monspecs), GFP_KERNEL);
+- if (!monspecs)
+- return NULL;
+-
+- modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
+- modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
+- if (!modedb)
+- goto err_dup_modedb;
+- monspecs->modedb = modedb;
+-
+- switch (id) {
+- case 0:
+- pdev = &atmel_lcdfb0_device;
+- select_peripheral(PC(19), PERIPH_A, 0); /* CC */
+- select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
+- select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
+- select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
+- select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
+- select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
+- select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
+- select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
+- select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
+- select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
+- select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
+- select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
+- select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
+- select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
+- select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
+- select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
+- select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
+- select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
+- select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
+- select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
+- select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
+- select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
+- select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
+- select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
+- select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
+- select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
+- select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
+- select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
+- select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
+- select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
+- select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
+-
+- clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
+- clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
+- break;
+-
+- default:
+- goto err_invalid_id;
+- }
+-
+- if (fbmem_len) {
+- pdev->resource[2].start = fbmem_start;
+- pdev->resource[2].end = fbmem_start + fbmem_len - 1;
+- pdev->resource[2].flags = IORESOURCE_MEM;
+- }
+-
+- info = pdev->dev.platform_data;
+- memcpy(info, data, sizeof(struct atmel_lcdfb_info));
+- info->default_monspecs = monspecs;
+-
+- platform_device_register(pdev);
+- return pdev;
+-
+-err_invalid_id:
+- kfree(modedb);
+-err_dup_modedb:
+- kfree(monspecs);
+- return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * SSC
+- * -------------------------------------------------------------------- */
+-static struct resource ssc0_resource[] = {
+- PBMEM(0xffe01c00),
+- IRQ(10),
+-};
+-DEFINE_DEV(ssc, 0);
+-DEV_CLK(pclk, ssc0, pba, 7);
+-
+-static struct resource ssc1_resource[] = {
+- PBMEM(0xffe02000),
+- IRQ(11),
+-};
+-DEFINE_DEV(ssc, 1);
+-DEV_CLK(pclk, ssc1, pba, 8);
+-
+-static struct resource ssc2_resource[] = {
+- PBMEM(0xffe02400),
+- IRQ(12),
+-};
+-DEFINE_DEV(ssc, 2);
+-DEV_CLK(pclk, ssc2, pba, 9);
+-
+-struct platform_device *__init
+-at32_add_device_ssc(unsigned int id, unsigned int flags)
+-{
+- struct platform_device *pdev;
+-
+- switch (id) {
+- case 0:
+- pdev = &ssc0_device;
+- if (flags & ATMEL_SSC_RF)
+- select_peripheral(PA(21), PERIPH_A, 0); /* RF */
+- if (flags & ATMEL_SSC_RK)
+- select_peripheral(PA(22), PERIPH_A, 0); /* RK */
+- if (flags & ATMEL_SSC_TK)
+- select_peripheral(PA(23), PERIPH_A, 0); /* TK */
+- if (flags & ATMEL_SSC_TF)
+- select_peripheral(PA(24), PERIPH_A, 0); /* TF */
+- if (flags & ATMEL_SSC_TD)
+- select_peripheral(PA(25), PERIPH_A, 0); /* TD */
+- if (flags & ATMEL_SSC_RD)
+- select_peripheral(PA(26), PERIPH_A, 0); /* RD */
+- break;
+- case 1:
+- pdev = &ssc1_device;
+- if (flags & ATMEL_SSC_RF)
+- select_peripheral(PA(0), PERIPH_B, 0); /* RF */
+- if (flags & ATMEL_SSC_RK)
+- select_peripheral(PA(1), PERIPH_B, 0); /* RK */
+- if (flags & ATMEL_SSC_TK)
+- select_peripheral(PA(2), PERIPH_B, 0); /* TK */
+- if (flags & ATMEL_SSC_TF)
+- select_peripheral(PA(3), PERIPH_B, 0); /* TF */
+- if (flags & ATMEL_SSC_TD)
+- select_peripheral(PA(4), PERIPH_B, 0); /* TD */
+- if (flags & ATMEL_SSC_RD)
+- select_peripheral(PA(5), PERIPH_B, 0); /* RD */
+- break;
+- case 2:
+- pdev = &ssc2_device;
+- if (flags & ATMEL_SSC_TD)
+- select_peripheral(PB(13), PERIPH_A, 0); /* TD */
+- if (flags & ATMEL_SSC_RD)
+- select_peripheral(PB(14), PERIPH_A, 0); /* RD */
+- if (flags & ATMEL_SSC_TK)
+- select_peripheral(PB(15), PERIPH_A, 0); /* TK */
+- if (flags & ATMEL_SSC_TF)
+- select_peripheral(PB(16), PERIPH_A, 0); /* TF */
+- if (flags & ATMEL_SSC_RF)
+- select_peripheral(PB(17), PERIPH_A, 0); /* RF */
+- if (flags & ATMEL_SSC_RK)
+- select_peripheral(PB(18), PERIPH_A, 0); /* RK */
+- break;
+- default:
+- return NULL;
+- }
+-
+- platform_device_register(pdev);
+- return pdev;
+-}
+-
+-/* --------------------------------------------------------------------
+- * GCLK
+- * -------------------------------------------------------------------- */
+-static struct clk gclk0 = {
+- .name = "gclk0",
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 0,
+-};
+-static struct clk gclk1 = {
+- .name = "gclk1",
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 1,
+-};
+-static struct clk gclk2 = {
+- .name = "gclk2",
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 2,
+-};
+-static struct clk gclk3 = {
+- .name = "gclk3",
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 3,
+-};
+-static struct clk gclk4 = {
+- .name = "gclk4",
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 4,
+-};
+-
+-struct clk *at32_clock_list[] = {
+- &osc32k,
+- &osc0,
+- &osc1,
+- &pll0,
+- &pll1,
+- &cpu_clk,
+- &hsb_clk,
+- &pba_clk,
+- &pbb_clk,
+- &at32_pm_pclk,
+- &at32_intc0_pclk,
+- &hmatrix_clk,
+- &ebi_clk,
+- &hramc_clk,
+- &smc0_pclk,
+- &smc0_mck,
+- &pdc_hclk,
+- &pdc_pclk,
+- &pico_clk,
+- &pio0_mck,
+- &pio1_mck,
+- &pio2_mck,
+- &pio3_mck,
+- &pio4_mck,
+- &at32_systc0_pclk,
+- &atmel_usart0_usart,
+- &atmel_usart1_usart,
+- &atmel_usart2_usart,
+- &atmel_usart3_usart,
+- &macb0_hclk,
+- &macb0_pclk,
+- &macb1_hclk,
+- &macb1_pclk,
+- &atmel_spi0_spi_clk,
+- &atmel_spi1_spi_clk,
+- &atmel_lcdfb0_hck1,
+- &atmel_lcdfb0_pixclk,
+- &ssc0_pclk,
+- &ssc1_pclk,
+- &ssc2_pclk,
+- &gclk0,
+- &gclk1,
+- &gclk2,
+- &gclk3,
+- &gclk4,
+-};
+-unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
+-
+-void __init at32_portmux_init(void)
+-{
+- at32_init_pio(&pio0_device);
+- at32_init_pio(&pio1_device);
+- at32_init_pio(&pio2_device);
+- at32_init_pio(&pio3_device);
+- at32_init_pio(&pio4_device);
+-}
+-
+-void __init at32_clock_init(void)
+-{
+- u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
+- int i;
+-
+- if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
+- main_clock = &pll0;
+- cpu_clk.parent = &pll0;
+- } else {
+- main_clock = &osc0;
+- cpu_clk.parent = &osc0;
+- }
+-
+- if (pm_readl(PLL0) & PM_BIT(PLLOSC))
+- pll0.parent = &osc1;
+- if (pm_readl(PLL1) & PM_BIT(PLLOSC))
+- pll1.parent = &osc1;
+-
+- genclk_init_parent(&gclk0);
+- genclk_init_parent(&gclk1);
+- genclk_init_parent(&gclk2);
+- genclk_init_parent(&gclk3);
+- genclk_init_parent(&gclk4);
+- genclk_init_parent(&atmel_lcdfb0_pixclk);
+-
+- /*
+- * Turn on all clocks that have at least one user already, and
+- * turn off everything else. We only do this for module
+- * clocks, and even though it isn't particularly pretty to
+- * check the address of the mode function, it should do the
+- * trick...
+- */
+- for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
+- struct clk *clk = at32_clock_list[i];
+-
+- if (clk->users == 0)
+- continue;
+-
+- if (clk->mode == &cpu_clk_mode)
+- cpu_mask |= 1 << clk->index;
+- else if (clk->mode == &hsb_clk_mode)
+- hsb_mask |= 1 << clk->index;
+- else if (clk->mode == &pba_clk_mode)
+- pba_mask |= 1 << clk->index;
+- else if (clk->mode == &pbb_clk_mode)
+- pbb_mask |= 1 << clk->index;
+- }
+-
+- pm_writel(CPU_MASK, cpu_mask);
+- pm_writel(HSB_MASK, hsb_mask);
+- pm_writel(PBA_MASK, pba_mask);
+- pm_writel(PBB_MASK, pbb_mask);
+-}
+diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
+new file mode 100644
+index 0000000..7fd93a5
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/at32ap700x.c
+@@ -0,0 +1,1754 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
++#include <linux/spi/spi.h>
++
++#include <asm/io.h>
++
++#include <asm/arch/at32ap700x.h>
++#include <asm/arch/board.h>
++#include <asm/arch/portmux.h>
++
++#include <video/atmel_lcdc.h>
++
++#include "clock.h"
++#include "hmatrix.h"
++#include "pio.h"
++#include "pm.h"
++
++
++#define PBMEM(base) \
++ { \
++ .start = base, \
++ .end = base + 0x3ff, \
++ .flags = IORESOURCE_MEM, \
++ }
++#define IRQ(num) \
++ { \
++ .start = num, \
++ .end = num, \
++ .flags = IORESOURCE_IRQ, \
++ }
++#define NAMED_IRQ(num, _name) \
++ { \
++ .start = num, \
++ .end = num, \
++ .name = _name, \
++ .flags = IORESOURCE_IRQ, \
++ }
++
++/* REVISIT these assume *every* device supports DMA, but several
++ * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
++ */
++#define DEFINE_DEV(_name, _id) \
++static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
++static struct platform_device _name##_id##_device = { \
++ .name = #_name, \
++ .id = _id, \
++ .dev = { \
++ .dma_mask = &_name##_id##_dma_mask, \
++ .coherent_dma_mask = DMA_32BIT_MASK, \
++ }, \
++ .resource = _name##_id##_resource, \
++ .num_resources = ARRAY_SIZE(_name##_id##_resource), \
++}
++#define DEFINE_DEV_DATA(_name, _id) \
++static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
++static struct platform_device _name##_id##_device = { \
++ .name = #_name, \
++ .id = _id, \
++ .dev = { \
++ .dma_mask = &_name##_id##_dma_mask, \
++ .platform_data = &_name##_id##_data, \
++ .coherent_dma_mask = DMA_32BIT_MASK, \
++ }, \
++ .resource = _name##_id##_resource, \
++ .num_resources = ARRAY_SIZE(_name##_id##_resource), \
++}
++
++#define select_peripheral(pin, periph, flags) \
++ at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
++
++#define DEV_CLK(_name, devname, bus, _index) \
++static struct clk devname##_##_name = { \
++ .name = #_name, \
++ .dev = &devname##_device.dev, \
++ .parent = &bus##_clk, \
++ .mode = bus##_clk_mode, \
++ .get_rate = bus##_clk_get_rate, \
++ .index = _index, \
++}
++
++static DEFINE_SPINLOCK(pm_lock);
++
++unsigned long at32ap7000_osc_rates[3] = {
++ [0] = 32768,
++ /* FIXME: these are ATSTK1002-specific */
++ [1] = 20000000,
++ [2] = 12000000,
++};
++
++static unsigned long osc_get_rate(struct clk *clk)
++{
++ return at32ap7000_osc_rates[clk->index];
++}
++
++static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
++{
++ unsigned long div, mul, rate;
++
++ if (!(control & PM_BIT(PLLEN)))
++ return 0;
++
++ div = PM_BFEXT(PLLDIV, control) + 1;
++ mul = PM_BFEXT(PLLMUL, control) + 1;
++
++ rate = clk->parent->get_rate(clk->parent);
++ rate = (rate + div / 2) / div;
++ rate *= mul;
++
++ return rate;
++}
++
++static unsigned long pll0_get_rate(struct clk *clk)
++{
++ u32 control;
++
++ control = pm_readl(PLL0);
++
++ return pll_get_rate(clk, control);
++}
++
++static unsigned long pll1_get_rate(struct clk *clk)
++{
++ u32 control;
++
++ control = pm_readl(PLL1);
++
++ return pll_get_rate(clk, control);
++}
++
++/*
++ * The AT32AP7000 has five primary clock sources: One 32kHz
++ * oscillator, two crystal oscillators and two PLLs.
++ */
++static struct clk osc32k = {
++ .name = "osc32k",
++ .get_rate = osc_get_rate,
++ .users = 1,
++ .index = 0,
++};
++static struct clk osc0 = {
++ .name = "osc0",
++ .get_rate = osc_get_rate,
++ .users = 1,
++ .index = 1,
++};
++static struct clk osc1 = {
++ .name = "osc1",
++ .get_rate = osc_get_rate,
++ .index = 2,
++};
++static struct clk pll0 = {
++ .name = "pll0",
++ .get_rate = pll0_get_rate,
++ .parent = &osc0,
++};
++static struct clk pll1 = {
++ .name = "pll1",
++ .get_rate = pll1_get_rate,
++ .parent = &osc0,
++};
++
++/*
++ * The main clock can be either osc0 or pll0. The boot loader may
++ * have chosen one for us, so we don't really know which one until we
++ * have a look at the SM.
++ */
++static struct clk *main_clock;
++
++/*
++ * Synchronous clocks are generated from the main clock. The clocks
++ * must satisfy the constraint
++ * fCPU >= fHSB >= fPB
++ * i.e. each clock must not be faster than its parent.
++ */
++static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
++{
++ return main_clock->get_rate(main_clock) >> shift;
++};
++
++static void cpu_clk_mode(struct clk *clk, int enabled)
++{
++ unsigned long flags;
++ u32 mask;
++
++ spin_lock_irqsave(&pm_lock, flags);
++ mask = pm_readl(CPU_MASK);
++ if (enabled)
++ mask |= 1 << clk->index;
++ else
++ mask &= ~(1 << clk->index);
++ pm_writel(CPU_MASK, mask);
++ spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long cpu_clk_get_rate(struct clk *clk)
++{
++ unsigned long cksel, shift = 0;
++
++ cksel = pm_readl(CKSEL);
++ if (cksel & PM_BIT(CPUDIV))
++ shift = PM_BFEXT(CPUSEL, cksel) + 1;
++
++ return bus_clk_get_rate(clk, shift);
++}
++
++static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
++{
++ u32 control;
++ unsigned long parent_rate, child_div, actual_rate, div;
++
++ parent_rate = clk->parent->get_rate(clk->parent);
++ control = pm_readl(CKSEL);
++
++ if (control & PM_BIT(HSBDIV))
++ child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
++ else
++ child_div = 1;
++
++ if (rate > 3 * (parent_rate / 4) || child_div == 1) {
++ actual_rate = parent_rate;
++ control &= ~PM_BIT(CPUDIV);
++ } else {
++ unsigned int cpusel;
++ div = (parent_rate + rate / 2) / rate;
++ if (div > child_div)
++ div = child_div;
++ cpusel = (div > 1) ? (fls(div) - 2) : 0;
++ control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
++ actual_rate = parent_rate / (1 << (cpusel + 1));
++ }
++
++ pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
++ clk->name, rate, actual_rate);
++
++ if (apply)
++ pm_writel(CKSEL, control);
++
++ return actual_rate;
++}
++
++static void hsb_clk_mode(struct clk *clk, int enabled)
++{
++ unsigned long flags;
++ u32 mask;
++
++ spin_lock_irqsave(&pm_lock, flags);
++ mask = pm_readl(HSB_MASK);
++ if (enabled)
++ mask |= 1 << clk->index;
++ else
++ mask &= ~(1 << clk->index);
++ pm_writel(HSB_MASK, mask);
++ spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long hsb_clk_get_rate(struct clk *clk)
++{
++ unsigned long cksel, shift = 0;
++
++ cksel = pm_readl(CKSEL);
++ if (cksel & PM_BIT(HSBDIV))
++ shift = PM_BFEXT(HSBSEL, cksel) + 1;
++
++ return bus_clk_get_rate(clk, shift);
++}
++
++static void pba_clk_mode(struct clk *clk, int enabled)
++{
++ unsigned long flags;
++ u32 mask;
++
++ spin_lock_irqsave(&pm_lock, flags);
++ mask = pm_readl(PBA_MASK);
++ if (enabled)
++ mask |= 1 << clk->index;
++ else
++ mask &= ~(1 << clk->index);
++ pm_writel(PBA_MASK, mask);
++ spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long pba_clk_get_rate(struct clk *clk)
++{
++ unsigned long cksel, shift = 0;
++
++ cksel = pm_readl(CKSEL);
++ if (cksel & PM_BIT(PBADIV))
++ shift = PM_BFEXT(PBASEL, cksel) + 1;
++
++ return bus_clk_get_rate(clk, shift);
++}
++
++static void pbb_clk_mode(struct clk *clk, int enabled)
++{
++ unsigned long flags;
++ u32 mask;
++
++ spin_lock_irqsave(&pm_lock, flags);
++ mask = pm_readl(PBB_MASK);
++ if (enabled)
++ mask |= 1 << clk->index;
++ else
++ mask &= ~(1 << clk->index);
++ pm_writel(PBB_MASK, mask);
++ spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long pbb_clk_get_rate(struct clk *clk)
++{
++ unsigned long cksel, shift = 0;
++
++ cksel = pm_readl(CKSEL);
++ if (cksel & PM_BIT(PBBDIV))
++ shift = PM_BFEXT(PBBSEL, cksel) + 1;
++
++ return bus_clk_get_rate(clk, shift);
++}
++
++static struct clk cpu_clk = {
++ .name = "cpu",
++ .get_rate = cpu_clk_get_rate,
++ .set_rate = cpu_clk_set_rate,
++ .users = 1,
++};
++static struct clk hsb_clk = {
++ .name = "hsb",
++ .parent = &cpu_clk,
++ .get_rate = hsb_clk_get_rate,
++};
++static struct clk pba_clk = {
++ .name = "pba",
++ .parent = &hsb_clk,
++ .mode = hsb_clk_mode,
++ .get_rate = pba_clk_get_rate,
++ .index = 1,
++};
++static struct clk pbb_clk = {
++ .name = "pbb",
++ .parent = &hsb_clk,
++ .mode = hsb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .users = 1,
++ .index = 2,
++};
++
++/* --------------------------------------------------------------------
++ * Generic Clock operations
++ * -------------------------------------------------------------------- */
++
++static void genclk_mode(struct clk *clk, int enabled)
++{
++ u32 control;
++
++ control = pm_readl(GCCTRL(clk->index));
++ if (enabled)
++ control |= PM_BIT(CEN);
++ else
++ control &= ~PM_BIT(CEN);
++ pm_writel(GCCTRL(clk->index), control);
++}
++
++static unsigned long genclk_get_rate(struct clk *clk)
++{
++ u32 control;
++ unsigned long div = 1;
++
++ control = pm_readl(GCCTRL(clk->index));
++ if (control & PM_BIT(DIVEN))
++ div = 2 * (PM_BFEXT(DIV, control) + 1);
++
++ return clk->parent->get_rate(clk->parent) / div;
++}
++
++static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
++{
++ u32 control;
++ unsigned long parent_rate, actual_rate, div;
++
++ parent_rate = clk->parent->get_rate(clk->parent);
++ control = pm_readl(GCCTRL(clk->index));
++
++ if (rate > 3 * parent_rate / 4) {
++ actual_rate = parent_rate;
++ control &= ~PM_BIT(DIVEN);
++ } else {
++ div = (parent_rate + rate) / (2 * rate) - 1;
++ control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
++ actual_rate = parent_rate / (2 * (div + 1));
++ }
++
++ dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
++ clk->name, rate, actual_rate);
++
++ if (apply)
++ pm_writel(GCCTRL(clk->index), control);
++
++ return actual_rate;
++}
++
++int genclk_set_parent(struct clk *clk, struct clk *parent)
++{
++ u32 control;
++
++ dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
++ clk->name, parent->name, clk->parent->name);
++
++ control = pm_readl(GCCTRL(clk->index));
++
++ if (parent == &osc1 || parent == &pll1)
++ control |= PM_BIT(OSCSEL);
++ else if (parent == &osc0 || parent == &pll0)
++ control &= ~PM_BIT(OSCSEL);
++ else
++ return -EINVAL;
++
++ if (parent == &pll0 || parent == &pll1)
++ control |= PM_BIT(PLLSEL);
++ else
++ control &= ~PM_BIT(PLLSEL);
++
++ pm_writel(GCCTRL(clk->index), control);
++ clk->parent = parent;
++
++ return 0;
++}
++
++static void __init genclk_init_parent(struct clk *clk)
++{
++ u32 control;
++ struct clk *parent;
++
++ BUG_ON(clk->index > 7);
++
++ control = pm_readl(GCCTRL(clk->index));
++ if (control & PM_BIT(OSCSEL))
++ parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
++ else
++ parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
++
++ clk->parent = parent;
++}
++
++/* --------------------------------------------------------------------
++ * System peripherals
++ * -------------------------------------------------------------------- */
++static struct resource at32_pm0_resource[] = {
++ {
++ .start = 0xfff00000,
++ .end = 0xfff0007f,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(20),
++};
++
++static struct resource at32ap700x_rtc0_resource[] = {
++ {
++ .start = 0xfff00080,
++ .end = 0xfff000af,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(21),
++};
++
++static struct resource at32_wdt0_resource[] = {
++ {
++ .start = 0xfff000b0,
++ .end = 0xfff000cf,
++ .flags = IORESOURCE_MEM,
++ },
++};
++
++static struct resource at32_eic0_resource[] = {
++ {
++ .start = 0xfff00100,
++ .end = 0xfff0013f,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(19),
++};
++
++DEFINE_DEV(at32_pm, 0);
++DEFINE_DEV(at32ap700x_rtc, 0);
++DEFINE_DEV(at32_wdt, 0);
++DEFINE_DEV(at32_eic, 0);
++
++/*
++ * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
++ * is always running.
++ */
++static struct clk at32_pm_pclk = {
++ .name = "pclk",
++ .dev = &at32_pm0_device.dev,
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .users = 1,
++ .index = 0,
++};
++
++static struct resource intc0_resource[] = {
++ PBMEM(0xfff00400),
++};
++struct platform_device at32_intc0_device = {
++ .name = "intc",
++ .id = 0,
++ .resource = intc0_resource,
++ .num_resources = ARRAY_SIZE(intc0_resource),
++};
++DEV_CLK(pclk, at32_intc0, pbb, 1);
++
++static struct clk ebi_clk = {
++ .name = "ebi",
++ .parent = &hsb_clk,
++ .mode = hsb_clk_mode,
++ .get_rate = hsb_clk_get_rate,
++ .users = 1,
++};
++static struct clk hramc_clk = {
++ .name = "hramc",
++ .parent = &hsb_clk,
++ .mode = hsb_clk_mode,
++ .get_rate = hsb_clk_get_rate,
++ .users = 1,
++ .index = 3,
++};
++
++static struct resource smc0_resource[] = {
++ PBMEM(0xfff03400),
++};
++DEFINE_DEV(smc, 0);
++DEV_CLK(pclk, smc0, pbb, 13);
++DEV_CLK(mck, smc0, hsb, 0);
++
++static struct platform_device pdc_device = {
++ .name = "pdc",
++ .id = 0,
++};
++DEV_CLK(hclk, pdc, hsb, 4);
++DEV_CLK(pclk, pdc, pba, 16);
++
++static struct clk pico_clk = {
++ .name = "pico",
++ .parent = &cpu_clk,
++ .mode = cpu_clk_mode,
++ .get_rate = cpu_clk_get_rate,
++ .users = 1,
++};
++
++static struct resource dmaca0_resource[] = {
++ {
++ .start = 0xff200000,
++ .end = 0xff20ffff,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(2),
++};
++DEFINE_DEV(dmaca, 0);
++DEV_CLK(hclk, dmaca0, hsb, 10);
++
++/* --------------------------------------------------------------------
++ * HMATRIX
++ * -------------------------------------------------------------------- */
++
++static struct clk hmatrix_clk = {
++ .name = "hmatrix_clk",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 2,
++ .users = 1,
++};
++#define HMATRIX_BASE ((void __iomem *)0xfff00800)
++
++#define hmatrix_readl(reg) \
++ __raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
++#define hmatrix_writel(reg,value) \
++ __raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
++
++/*
++ * Set bits in the HMATRIX Special Function Register (SFR) used by the
++ * External Bus Interface (EBI). This can be used to enable special
++ * features like CompactFlash support, NAND Flash support, etc. on
++ * certain chipselects.
++ */
++static inline void set_ebi_sfr_bits(u32 mask)
++{
++ u32 sfr;
++
++ clk_enable(&hmatrix_clk);
++ sfr = hmatrix_readl(SFR4);
++ sfr |= mask;
++ hmatrix_writel(SFR4, sfr);
++ clk_disable(&hmatrix_clk);
++}
++
++/* --------------------------------------------------------------------
++ * System Timer/Counter (TC)
++ * -------------------------------------------------------------------- */
++static struct resource at32_systc0_resource[] = {
++ PBMEM(0xfff00c00),
++ IRQ(22),
++};
++struct platform_device at32_systc0_device = {
++ .name = "systc",
++ .id = 0,
++ .resource = at32_systc0_resource,
++ .num_resources = ARRAY_SIZE(at32_systc0_resource),
++};
++DEV_CLK(pclk, at32_systc0, pbb, 3);
++
++/* --------------------------------------------------------------------
++ * PIO
++ * -------------------------------------------------------------------- */
++
++static struct resource pio0_resource[] = {
++ PBMEM(0xffe02800),
++ IRQ(13),
++};
++DEFINE_DEV(pio, 0);
++DEV_CLK(mck, pio0, pba, 10);
++
++static struct resource pio1_resource[] = {
++ PBMEM(0xffe02c00),
++ IRQ(14),
++};
++DEFINE_DEV(pio, 1);
++DEV_CLK(mck, pio1, pba, 11);
++
++static struct resource pio2_resource[] = {
++ PBMEM(0xffe03000),
++ IRQ(15),
++};
++DEFINE_DEV(pio, 2);
++DEV_CLK(mck, pio2, pba, 12);
++
++static struct resource pio3_resource[] = {
++ PBMEM(0xffe03400),
++ IRQ(16),
++};
++DEFINE_DEV(pio, 3);
++DEV_CLK(mck, pio3, pba, 13);
++
++static struct resource pio4_resource[] = {
++ PBMEM(0xffe03800),
++ IRQ(17),
++};
++DEFINE_DEV(pio, 4);
++DEV_CLK(mck, pio4, pba, 14);
++
++void __init at32_add_system_devices(void)
++{
++ platform_device_register(&at32_pm0_device);
++ platform_device_register(&at32_intc0_device);
++ platform_device_register(&at32ap700x_rtc0_device);
++ platform_device_register(&at32_wdt0_device);
++ platform_device_register(&at32_eic0_device);
++ platform_device_register(&smc0_device);
++ platform_device_register(&pdc_device);
++ platform_device_register(&dmaca0_device);
++
++ platform_device_register(&at32_systc0_device);
++
++ platform_device_register(&pio0_device);
++ platform_device_register(&pio1_device);
++ platform_device_register(&pio2_device);
++ platform_device_register(&pio3_device);
++ platform_device_register(&pio4_device);
++}
++
++/* --------------------------------------------------------------------
++ * USART
++ * -------------------------------------------------------------------- */
++
++static struct atmel_uart_data atmel_usart0_data = {
++ .use_dma_tx = 1,
++ .use_dma_rx = 1,
++};
++static struct resource atmel_usart0_resource[] = {
++ PBMEM(0xffe00c00),
++ IRQ(6),
++};
++DEFINE_DEV_DATA(atmel_usart, 0);
++DEV_CLK(usart, atmel_usart0, pba, 4);
++
++static struct atmel_uart_data atmel_usart1_data = {
++ .use_dma_tx = 1,
++ .use_dma_rx = 1,
++};
++static struct resource atmel_usart1_resource[] = {
++ PBMEM(0xffe01000),
++ IRQ(7),
++};
++DEFINE_DEV_DATA(atmel_usart, 1);
++DEV_CLK(usart, atmel_usart1, pba, 4);
++
++static struct atmel_uart_data atmel_usart2_data = {
++ .use_dma_tx = 1,
++ .use_dma_rx = 1,
++};
++static struct resource atmel_usart2_resource[] = {
++ PBMEM(0xffe01400),
++ IRQ(8),
++};
++DEFINE_DEV_DATA(atmel_usart, 2);
++DEV_CLK(usart, atmel_usart2, pba, 5);
++
++static struct atmel_uart_data atmel_usart3_data = {
++ .use_dma_tx = 1,
++ .use_dma_rx = 1,
++};
++static struct resource atmel_usart3_resource[] = {
++ PBMEM(0xffe01800),
++ IRQ(9),
++};
++DEFINE_DEV_DATA(atmel_usart, 3);
++DEV_CLK(usart, atmel_usart3, pba, 6);
++
++static inline void configure_usart0_pins(void)
++{
++ select_peripheral(PA(8), PERIPH_B, 0); /* RXD */
++ select_peripheral(PA(9), PERIPH_B, 0); /* TXD */
++}
++
++static inline void configure_usart1_pins(void)
++{
++ select_peripheral(PA(17), PERIPH_A, 0); /* RXD */
++ select_peripheral(PA(18), PERIPH_A, 0); /* TXD */
++}
++
++static inline void configure_usart2_pins(void)
++{
++ select_peripheral(PB(26), PERIPH_B, 0); /* RXD */
++ select_peripheral(PB(27), PERIPH_B, 0); /* TXD */
++}
++
++static inline void configure_usart3_pins(void)
++{
++ select_peripheral(PB(18), PERIPH_B, 0); /* RXD */
++ select_peripheral(PB(17), PERIPH_B, 0); /* TXD */
++}
++
++static struct platform_device *__initdata at32_usarts[4];
++
++void __init at32_map_usart(unsigned int hw_id, unsigned int line)
++{
++ struct platform_device *pdev;
++
++ switch (hw_id) {
++ case 0:
++ pdev = &atmel_usart0_device;
++ configure_usart0_pins();
++ break;
++ case 1:
++ pdev = &atmel_usart1_device;
++ configure_usart1_pins();
++ break;
++ case 2:
++ pdev = &atmel_usart2_device;
++ configure_usart2_pins();
++ break;
++ case 3:
++ pdev = &atmel_usart3_device;
++ configure_usart3_pins();
++ break;
++ default:
++ return;
++ }
++
++ if (PXSEG(pdev->resource[0].start) == P4SEG) {
++ /* Addresses in the P4 segment are permanently mapped 1:1 */
++ struct atmel_uart_data *data = pdev->dev.platform_data;
++ data->regs = (void __iomem *)pdev->resource[0].start;
++ }
++
++ pdev->id = line;
++ at32_usarts[line] = pdev;
++}
++
++struct platform_device *__init at32_add_device_usart(unsigned int id)
++{
++ platform_device_register(at32_usarts[id]);
++ return at32_usarts[id];
++}
++
++struct platform_device *atmel_default_console_device;
++
++void __init at32_setup_serial_console(unsigned int usart_id)
++{
++ atmel_default_console_device = at32_usarts[usart_id];
++}
++
++/* --------------------------------------------------------------------
++ * Ethernet
++ * -------------------------------------------------------------------- */
++
++#ifdef CONFIG_CPU_AT32AP7000
++static struct eth_platform_data macb0_data;
++static struct resource macb0_resource[] = {
++ PBMEM(0xfff01800),
++ IRQ(25),
++};
++DEFINE_DEV_DATA(macb, 0);
++DEV_CLK(hclk, macb0, hsb, 8);
++DEV_CLK(pclk, macb0, pbb, 6);
++
++static struct eth_platform_data macb1_data;
++static struct resource macb1_resource[] = {
++ PBMEM(0xfff01c00),
++ IRQ(26),
++};
++DEFINE_DEV_DATA(macb, 1);
++DEV_CLK(hclk, macb1, hsb, 9);
++DEV_CLK(pclk, macb1, pbb, 7);
++
++struct platform_device *__init
++at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0:
++ pdev = &macb0_device;
++
++ select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */
++ select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */
++ select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */
++ select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */
++ select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */
++ select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */
++ select_peripheral(PC(13), PERIPH_A, 0); /* RXER */
++ select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */
++ select_peripheral(PC(16), PERIPH_A, 0); /* MDC */
++ select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */
++
++ if (!data->is_rmii) {
++ select_peripheral(PC(0), PERIPH_A, 0); /* COL */
++ select_peripheral(PC(1), PERIPH_A, 0); /* CRS */
++ select_peripheral(PC(2), PERIPH_A, 0); /* TXER */
++ select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */
++ select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */
++ select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */
++ select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */
++ select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */
++ select_peripheral(PC(18), PERIPH_A, 0); /* SPD */
++ }
++ break;
++
++ case 1:
++ pdev = &macb1_device;
++
++ select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */
++ select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */
++ select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */
++ select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */
++ select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */
++ select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */
++ select_peripheral(PD(5), PERIPH_B, 0); /* RXER */
++ select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */
++ select_peripheral(PD(3), PERIPH_B, 0); /* MDC */
++ select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */
++
++ if (!data->is_rmii) {
++ select_peripheral(PC(19), PERIPH_B, 0); /* COL */
++ select_peripheral(PC(23), PERIPH_B, 0); /* CRS */
++ select_peripheral(PC(26), PERIPH_B, 0); /* TXER */
++ select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */
++ select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */
++ select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */
++ select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */
++ select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */
++ select_peripheral(PD(15), PERIPH_B, 0); /* SPD */
++ }
++ break;
++
++ default:
++ return NULL;
++ }
++
++ memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
++ platform_device_register(pdev);
++
++ return pdev;
++}
++#endif
++
++/* --------------------------------------------------------------------
++ * SPI
++ * -------------------------------------------------------------------- */
++static struct resource atmel_spi0_resource[] = {
++ PBMEM(0xffe00000),
++ IRQ(3),
++};
++DEFINE_DEV(atmel_spi, 0);
++DEV_CLK(spi_clk, atmel_spi0, pba, 0);
++
++static struct resource atmel_spi1_resource[] = {
++ PBMEM(0xffe00400),
++ IRQ(4),
++};
++DEFINE_DEV(atmel_spi, 1);
++DEV_CLK(spi_clk, atmel_spi1, pba, 1);
++
++static void __init
++at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
++ unsigned int n, const u8 *pins)
++{
++ unsigned int pin, mode;
++
++ for (; n; n--, b++) {
++ b->bus_num = bus_num;
++ if (b->chip_select >= 4)
++ continue;
++ pin = (unsigned)b->controller_data;
++ if (!pin) {
++ pin = pins[b->chip_select];
++ b->controller_data = (void *)pin;
++ }
++ mode = AT32_GPIOF_OUTPUT;
++ if (!(b->mode & SPI_CS_HIGH))
++ mode |= AT32_GPIOF_HIGH;
++ at32_select_gpio(pin, mode);
++ }
++}
++
++struct platform_device *__init
++at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
++{
++ /*
++ * Manage the chipselects as GPIOs, normally using the same pins
++ * the SPI controller expects; but boards can use other pins.
++ */
++ static u8 __initdata spi0_pins[] =
++ { GPIO_PIN_PA(3), GPIO_PIN_PA(4),
++ GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
++ static u8 __initdata spi1_pins[] =
++ { GPIO_PIN_PB(2), GPIO_PIN_PB(3),
++ GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0:
++ pdev = &atmel_spi0_device;
++ select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
++ select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
++ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
++ at32_spi_setup_slaves(0, b, n, spi0_pins);
++ break;
++
++ case 1:
++ pdev = &atmel_spi1_device;
++ select_peripheral(PB(0), PERIPH_B, 0); /* MISO */
++ select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
++ select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
++ at32_spi_setup_slaves(1, b, n, spi1_pins);
++ break;
++
++ default:
++ return NULL;
++ }
++
++ spi_register_board_info(b, n);
++ platform_device_register(pdev);
++ return pdev;
++}
++
++/* --------------------------------------------------------------------
++ * TWI
++ * -------------------------------------------------------------------- */
++static struct resource atmel_twi0_resource[] __initdata = {
++ PBMEM(0xffe00800),
++ IRQ(5),
++};
++static struct clk atmel_twi0_pclk = {
++ .name = "twi_pclk",
++ .parent = &pba_clk,
++ .mode = pba_clk_mode,
++ .get_rate = pba_clk_get_rate,
++ .index = 2,
++};
++
++struct platform_device *__init at32_add_device_twi(unsigned int id)
++{
++ struct platform_device *pdev;
++
++ if (id != 0)
++ return NULL;
++
++ pdev = platform_device_alloc("atmel_twi", id);
++ if (!pdev)
++ return NULL;
++
++ if (platform_device_add_resources(pdev, atmel_twi0_resource,
++ ARRAY_SIZE(atmel_twi0_resource)))
++ goto err_add_resources;
++
++ select_peripheral(PA(6), PERIPH_A, 0); /* SDA */
++ select_peripheral(PA(7), PERIPH_A, 0); /* SDL */
++
++ atmel_twi0_pclk.dev = &pdev->dev;
++
++ platform_device_add(pdev);
++ return pdev;
++
++err_add_resources:
++ platform_device_put(pdev);
++ return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * MMC
++ * -------------------------------------------------------------------- */
++static struct resource atmel_mci0_resource[] __initdata = {
++ PBMEM(0xfff02400),
++ IRQ(28),
++};
++static struct clk atmel_mci0_pclk = {
++ .name = "mci_clk",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 9,
++};
++
++struct platform_device *__init
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
++{
++ struct platform_device *pdev;
++
++ if (id != 0)
++ return NULL;
++
++ pdev = platform_device_alloc("atmel_mci", id);
++ if (!pdev)
++ goto fail;
++
++ if (platform_device_add_resources(pdev, atmel_mci0_resource,
++ ARRAY_SIZE(atmel_mci0_resource)))
++ goto fail;
++
++ if (data && platform_device_add_data(pdev, data,
++ sizeof(struct mci_platform_data)))
++ goto fail;
++
++ select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
++ select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
++ select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
++ select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
++ select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
++ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
++
++ if (data) {
++ if (data->detect_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->detect_pin, 0);
++ if (data->wp_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->wp_pin, 0);
++ }
++
++ atmel_mci0_pclk.dev = &pdev->dev;
++
++ platform_device_add(pdev);
++ return pdev;
++
++fail:
++ platform_device_put(pdev);
++ return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * LCDC
++ * -------------------------------------------------------------------- */
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
++static struct atmel_lcdfb_info atmel_lcdfb0_data;
++static struct resource atmel_lcdfb0_resource[] = {
++ {
++ .start = 0xff000000,
++ .end = 0xff000fff,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(1),
++ {
++ /* Placeholder for pre-allocated fb memory */
++ .start = 0x00000000,
++ .end = 0x00000000,
++ .flags = 0,
++ },
++};
++DEFINE_DEV_DATA(atmel_lcdfb, 0);
++DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
++static struct clk atmel_lcdfb0_pixclk = {
++ .name = "lcdc_clk",
++ .dev = &atmel_lcdfb0_device.dev,
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 7,
++};
++
++struct platform_device *__init
++at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
++ unsigned long fbmem_start, unsigned long fbmem_len)
++{
++ struct platform_device *pdev;
++ struct atmel_lcdfb_info *info;
++ struct fb_monspecs *monspecs;
++ struct fb_videomode *modedb;
++ unsigned int modedb_size;
++
++ /*
++ * Do a deep copy of the fb data, monspecs and modedb. Make
++ * sure all allocations are done before setting up the
++ * portmux.
++ */
++ monspecs = kmemdup(data->default_monspecs,
++ sizeof(struct fb_monspecs), GFP_KERNEL);
++ if (!monspecs)
++ return NULL;
++
++ modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
++ modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
++ if (!modedb)
++ goto err_dup_modedb;
++ monspecs->modedb = modedb;
++
++ switch (id) {
++ case 0:
++ pdev = &atmel_lcdfb0_device;
++ select_peripheral(PC(19), PERIPH_A, 0); /* CC */
++ select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
++ select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
++ select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
++ select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
++ select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
++ select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
++ select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
++ select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
++ select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
++ select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
++ select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
++ select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
++ select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
++ select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
++ select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
++ select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
++ select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
++ select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
++ select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
++ select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
++ select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
++ select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
++ select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
++ select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
++ select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
++ select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
++ select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
++ select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
++ select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
++ select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
++
++ clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
++ clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
++ break;
++
++ default:
++ goto err_invalid_id;
++ }
++
++ if (fbmem_len) {
++ pdev->resource[2].start = fbmem_start;
++ pdev->resource[2].end = fbmem_start + fbmem_len - 1;
++ pdev->resource[2].flags = IORESOURCE_MEM;
++ }
++
++ info = pdev->dev.platform_data;
++ memcpy(info, data, sizeof(struct atmel_lcdfb_info));
++ info->default_monspecs = monspecs;
++
++ platform_device_register(pdev);
++ return pdev;
++
++err_invalid_id:
++ kfree(modedb);
++err_dup_modedb:
++ kfree(monspecs);
++ return NULL;
++}
++#endif
++
++/* --------------------------------------------------------------------
++ * SSC
++ * -------------------------------------------------------------------- */
++static struct resource ssc0_resource[] = {
++ PBMEM(0xffe01c00),
++ IRQ(10),
++};
++DEFINE_DEV(ssc, 0);
++DEV_CLK(pclk, ssc0, pba, 7);
++
++static struct resource ssc1_resource[] = {
++ PBMEM(0xffe02000),
++ IRQ(11),
++};
++DEFINE_DEV(ssc, 1);
++DEV_CLK(pclk, ssc1, pba, 8);
++
++static struct resource ssc2_resource[] = {
++ PBMEM(0xffe02400),
++ IRQ(12),
++};
++DEFINE_DEV(ssc, 2);
++DEV_CLK(pclk, ssc2, pba, 9);
++
++struct platform_device *__init
++at32_add_device_ssc(unsigned int id, unsigned int flags)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0:
++ pdev = &ssc0_device;
++ if (flags & ATMEL_SSC_RF)
++ select_peripheral(PA(21), PERIPH_A, 0); /* RF */
++ if (flags & ATMEL_SSC_RK)
++ select_peripheral(PA(22), PERIPH_A, 0); /* RK */
++ if (flags & ATMEL_SSC_TK)
++ select_peripheral(PA(23), PERIPH_A, 0); /* TK */
++ if (flags & ATMEL_SSC_TF)
++ select_peripheral(PA(24), PERIPH_A, 0); /* TF */
++ if (flags & ATMEL_SSC_TD)
++ select_peripheral(PA(25), PERIPH_A, 0); /* TD */
++ if (flags & ATMEL_SSC_RD)
++ select_peripheral(PA(26), PERIPH_A, 0); /* RD */
++ break;
++ case 1:
++ pdev = &ssc1_device;
++ if (flags & ATMEL_SSC_RF)
++ select_peripheral(PA(0), PERIPH_B, 0); /* RF */
++ if (flags & ATMEL_SSC_RK)
++ select_peripheral(PA(1), PERIPH_B, 0); /* RK */
++ if (flags & ATMEL_SSC_TK)
++ select_peripheral(PA(2), PERIPH_B, 0); /* TK */
++ if (flags & ATMEL_SSC_TF)
++ select_peripheral(PA(3), PERIPH_B, 0); /* TF */
++ if (flags & ATMEL_SSC_TD)
++ select_peripheral(PA(4), PERIPH_B, 0); /* TD */
++ if (flags & ATMEL_SSC_RD)
++ select_peripheral(PA(5), PERIPH_B, 0); /* RD */
++ break;
++ case 2:
++ pdev = &ssc2_device;
++ if (flags & ATMEL_SSC_TD)
++ select_peripheral(PB(13), PERIPH_A, 0); /* TD */
++ if (flags & ATMEL_SSC_RD)
++ select_peripheral(PB(14), PERIPH_A, 0); /* RD */
++ if (flags & ATMEL_SSC_TK)
++ select_peripheral(PB(15), PERIPH_A, 0); /* TK */
++ if (flags & ATMEL_SSC_TF)
++ select_peripheral(PB(16), PERIPH_A, 0); /* TF */
++ if (flags & ATMEL_SSC_RF)
++ select_peripheral(PB(17), PERIPH_A, 0); /* RF */
++ if (flags & ATMEL_SSC_RK)
++ select_peripheral(PB(18), PERIPH_A, 0); /* RK */
++ break;
++ default:
++ return NULL;
++ }
++
++ platform_device_register(pdev);
++ return pdev;
++}
++
++/* --------------------------------------------------------------------
++ * USB Device Controller
++ * -------------------------------------------------------------------- */
++static struct resource usba0_resource[] __initdata = {
++ {
++ .start = 0xff300000,
++ .end = 0xff3fffff,
++ .flags = IORESOURCE_MEM,
++ }, {
++ .start = 0xfff03000,
++ .end = 0xfff033ff,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(31),
++};
++static struct clk usba0_pclk = {
++ .name = "pclk",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 12,
++};
++static struct clk usba0_hclk = {
++ .name = "hclk",
++ .parent = &hsb_clk,
++ .mode = hsb_clk_mode,
++ .get_rate = hsb_clk_get_rate,
++ .index = 6,
++};
++
++struct platform_device *__init
++at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
++{
++ struct platform_device *pdev;
++
++ if (id != 0)
++ return NULL;
++
++ pdev = platform_device_alloc("atmel_usba_udc", 0);
++ if (!pdev)
++ return NULL;
++
++ if (platform_device_add_resources(pdev, usba0_resource,
++ ARRAY_SIZE(usba0_resource)))
++ goto out_free_pdev;
++
++ if (data) {
++ if (platform_device_add_data(pdev, data, sizeof(*data)))
++ goto out_free_pdev;
++
++ if (data->vbus_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->vbus_pin, 0);
++ }
++
++ usba0_pclk.dev = &pdev->dev;
++ usba0_hclk.dev = &pdev->dev;
++
++ platform_device_add(pdev);
++
++ return pdev;
++
++out_free_pdev:
++ platform_device_put(pdev);
++ return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * IDE / CompactFlash
++ * -------------------------------------------------------------------- */
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7001)
++static struct resource at32_smc_cs4_resource[] __initdata = {
++ {
++ .start = 0x04000000,
++ .end = 0x07ffffff,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(~0UL), /* Magic IRQ will be overridden */
++};
++static struct resource at32_smc_cs5_resource[] __initdata = {
++ {
++ .start = 0x20000000,
++ .end = 0x23ffffff,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(~0UL), /* Magic IRQ will be overridden */
++};
++
++static int __init at32_init_ide_or_cf(struct platform_device *pdev,
++ unsigned int cs, unsigned int extint)
++{
++ static unsigned int extint_pin_map[4] __initdata = {
++ GPIO_PIN_PB(25),
++ GPIO_PIN_PB(26),
++ GPIO_PIN_PB(27),
++ GPIO_PIN_PB(28),
++ };
++ static bool common_pins_initialized __initdata = false;
++ unsigned int extint_pin;
++ int ret;
++
++ if (extint >= ARRAY_SIZE(extint_pin_map))
++ return -EINVAL;
++ extint_pin = extint_pin_map[extint];
++
++ switch (cs) {
++ case 4:
++ ret = platform_device_add_resources(pdev,
++ at32_smc_cs4_resource,
++ ARRAY_SIZE(at32_smc_cs4_resource));
++ if (ret)
++ return ret;
++
++ select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 -> OE_N */
++ set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
++ break;
++ case 5:
++ ret = platform_device_add_resources(pdev,
++ at32_smc_cs5_resource,
++ ARRAY_SIZE(at32_smc_cs5_resource));
++ if (ret)
++ return ret;
++
++ select_peripheral(PE(22), PERIPH_A, 0); /* NCS5 -> OE_N */
++ set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ if (!common_pins_initialized) {
++ select_peripheral(PE(19), PERIPH_A, 0); /* CFCE1 -> CS0_N */
++ select_peripheral(PE(20), PERIPH_A, 0); /* CFCE2 -> CS1_N */
++ select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW -> DIR */
++ select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT <- IORDY */
++ common_pins_initialized = true;
++ }
++
++ at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
++
++ pdev->resource[1].start = EIM_IRQ_BASE + extint;
++ pdev->resource[1].end = pdev->resource[1].start;
++
++ return 0;
++}
++
++struct platform_device *__init
++at32_add_device_ide(unsigned int id, unsigned int extint,
++ struct ide_platform_data *data)
++{
++ struct platform_device *pdev;
++
++ pdev = platform_device_alloc("at32_ide", id);
++ if (!pdev)
++ goto fail;
++
++ if (platform_device_add_data(pdev, data,
++ sizeof(struct ide_platform_data)))
++ goto fail;
++
++ if (at32_init_ide_or_cf(pdev, data->cs, extint))
++ goto fail;
++
++ platform_device_add(pdev);
++ return pdev;
++
++fail:
++ platform_device_put(pdev);
++ return NULL;
++}
++
++struct platform_device *__init
++at32_add_device_cf(unsigned int id, unsigned int extint,
++ struct cf_platform_data *data)
++{
++ struct platform_device *pdev;
++
++ pdev = platform_device_alloc("at32_cf", id);
++ if (!pdev)
++ goto fail;
++
++ if (platform_device_add_data(pdev, data,
++ sizeof(struct cf_platform_data)))
++ goto fail;
++
++ if (at32_init_ide_or_cf(pdev, data->cs, extint))
++ goto fail;
++
++ if (data->detect_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
++ if (data->reset_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->reset_pin, 0);
++ if (data->vcc_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->vcc_pin, 0);
++ /* READY is used as extint, so we can't select it as gpio */
++
++ platform_device_add(pdev);
++ return pdev;
++
++fail:
++ platform_device_put(pdev);
++ return NULL;
++}
++#endif
++
++/* --------------------------------------------------------------------
++ * AC97C
++ * -------------------------------------------------------------------- */
++static struct resource atmel_ac97c0_resource[] __initdata = {
++ PBMEM(0xfff02800),
++ IRQ(29),
++};
++static struct clk atmel_ac97c0_pclk = {
++ .name = "pclk",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 10,
++};
++
++struct platform_device *__init at32_add_device_ac97c(unsigned int id)
++{
++ struct platform_device *pdev;
++
++ if (id != 0)
++ return NULL;
++
++ pdev = platform_device_alloc("atmel_ac97c", id);
++ if (!pdev)
++ return NULL;
++
++ if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
++ ARRAY_SIZE(atmel_ac97c0_resource)))
++ goto err_add_resources;
++
++ select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
++ select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
++ select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
++ select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
++
++ atmel_ac97c0_pclk.dev = &pdev->dev;
++
++ platform_device_add(pdev);
++ return pdev;
++
++err_add_resources:
++ platform_device_put(pdev);
++ return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * ABDAC
++ * -------------------------------------------------------------------- */
++static struct resource abdac0_resource[] __initdata = {
++ PBMEM(0xfff02000),
++ IRQ(27),
++};
++static struct clk abdac0_pclk = {
++ .name = "pclk",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 8,
++};
++static struct clk abdac0_sample_clk = {
++ .name = "sample_clk",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 6,
++};
++
++struct platform_device *__init at32_add_device_abdac(unsigned int id)
++{
++ struct platform_device *pdev;
++
++ if (id != 0)
++ return NULL;
++
++ pdev = platform_device_alloc("abdac", id);
++ if (!pdev)
++ return NULL;
++
++ if (platform_device_add_resources(pdev, abdac0_resource,
++ ARRAY_SIZE(abdac0_resource)))
++ goto err_add_resources;
++
++ select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */
++ select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */
++ select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */
++ select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */
++
++ abdac0_pclk.dev = &pdev->dev;
++ abdac0_sample_clk.dev = &pdev->dev;
++
++ platform_device_add(pdev);
++ return pdev;
++
++err_add_resources:
++ platform_device_put(pdev);
++ return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * GCLK
++ * -------------------------------------------------------------------- */
++static struct clk gclk0 = {
++ .name = "gclk0",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 0,
++};
++static struct clk gclk1 = {
++ .name = "gclk1",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 1,
++};
++static struct clk gclk2 = {
++ .name = "gclk2",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 2,
++};
++static struct clk gclk3 = {
++ .name = "gclk3",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 3,
++};
++static struct clk gclk4 = {
++ .name = "gclk4",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 4,
++};
++
++struct clk *at32_clock_list[] = {
++ &osc32k,
++ &osc0,
++ &osc1,
++ &pll0,
++ &pll1,
++ &cpu_clk,
++ &hsb_clk,
++ &pba_clk,
++ &pbb_clk,
++ &at32_pm_pclk,
++ &at32_intc0_pclk,
++ &hmatrix_clk,
++ &ebi_clk,
++ &hramc_clk,
++ &smc0_pclk,
++ &smc0_mck,
++ &pdc_hclk,
++ &pdc_pclk,
++ &dmaca0_hclk,
++ &pico_clk,
++ &pio0_mck,
++ &pio1_mck,
++ &pio2_mck,
++ &pio3_mck,
++ &pio4_mck,
++ &at32_systc0_pclk,
++ &atmel_usart0_usart,
++ &atmel_usart1_usart,
++ &atmel_usart2_usart,
++ &atmel_usart3_usart,
++#if defined(CONFIG_CPU_AT32AP7000)
++ &macb0_hclk,
++ &macb0_pclk,
++ &macb1_hclk,
++ &macb1_pclk,
++#endif
++ &atmel_spi0_spi_clk,
++ &atmel_spi1_spi_clk,
++ &atmel_twi0_pclk,
++ &atmel_mci0_pclk,
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
++ &atmel_lcdfb0_hck1,
++ &atmel_lcdfb0_pixclk,
++#endif
++ &ssc0_pclk,
++ &ssc1_pclk,
++ &ssc2_pclk,
++ &usba0_hclk,
++ &usba0_pclk,
++ &atmel_ac97c0_pclk,
++ &abdac0_pclk,
++ &abdac0_sample_clk,
++ &gclk0,
++ &gclk1,
++ &gclk2,
++ &gclk3,
++ &gclk4,
++};
++unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
++
++void __init at32_portmux_init(void)
++{
++ at32_init_pio(&pio0_device);
++ at32_init_pio(&pio1_device);
++ at32_init_pio(&pio2_device);
++ at32_init_pio(&pio3_device);
++ at32_init_pio(&pio4_device);
++}
++
++void __init at32_clock_init(void)
++{
++ u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
++ int i;
++
++ if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
++ main_clock = &pll0;
++ cpu_clk.parent = &pll0;
++ } else {
++ main_clock = &osc0;
++ cpu_clk.parent = &osc0;
++ }
++
++ if (pm_readl(PLL0) & PM_BIT(PLLOSC))
++ pll0.parent = &osc1;
++ if (pm_readl(PLL1) & PM_BIT(PLLOSC))
++ pll1.parent = &osc1;
++
++ genclk_init_parent(&gclk0);
++ genclk_init_parent(&gclk1);
++ genclk_init_parent(&gclk2);
++ genclk_init_parent(&gclk3);
++ genclk_init_parent(&gclk4);
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
++ genclk_init_parent(&atmel_lcdfb0_pixclk);
++#endif
++ genclk_init_parent(&abdac0_sample_clk);
++
++ /*
++ * Turn on all clocks that have at least one user already, and
++ * turn off everything else. We only do this for module
++ * clocks, and even though it isn't particularly pretty to
++ * check the address of the mode function, it should do the
++ * trick...
++ */
++ for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
++ struct clk *clk = at32_clock_list[i];
++
++ if (clk->users == 0)
++ continue;
++
++ if (clk->mode == &cpu_clk_mode)
++ cpu_mask |= 1 << clk->index;
++ else if (clk->mode == &hsb_clk_mode)
++ hsb_mask |= 1 << clk->index;
++ else if (clk->mode == &pba_clk_mode)
++ pba_mask |= 1 << clk->index;
++ else if (clk->mode == &pbb_clk_mode)
++ pbb_mask |= 1 << clk->index;
++ }
++
++ pm_writel(CPU_MASK, cpu_mask);
++ pm_writel(HSB_MASK, hsb_mask);
++ pm_writel(PBA_MASK, pba_mask);
++ pm_writel(PBB_MASK, pbb_mask);
++}
+diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
+index 0f8c89c..4642117 100644
+--- a/arch/avr32/mach-at32ap/clock.c
++++ b/arch/avr32/mach-at32ap/clock.c
+@@ -150,3 +150,119 @@ struct clk *clk_get_parent(struct clk *clk)
+ return clk->parent;
+ }
+ EXPORT_SYMBOL(clk_get_parent);
++
++
++
++#ifdef CONFIG_DEBUG_FS
++
++/* /sys/kernel/debug/at32ap_clk */
++
++#include <linux/io.h>
++#include <linux/debugfs.h>
++#include <linux/seq_file.h>
++#include "pm.h"
++
++
++#define NEST_DELTA 2
++#define NEST_MAX 6
++
++struct clkinf {
++ struct seq_file *s;
++ unsigned nest;
++};
++
++static void
++dump_clock(struct clk *parent, struct clkinf *r)
++{
++ unsigned nest = r->nest;
++ char buf[16 + NEST_MAX];
++ struct clk *clk;
++ unsigned i;
++
++ /* skip clocks coupled to devices that aren't registered */
++ if (parent->dev && !parent->dev->bus_id[0] && !parent->users)
++ return;
++
++ /* <nest spaces> name <pad to end> */
++ memset(buf, ' ', sizeof(buf) - 1);
++ buf[sizeof(buf) - 1] = 0;
++ i = strlen(parent->name);
++ memcpy(buf + nest, parent->name,
++ min(i, (unsigned)(sizeof(buf) - 1 - nest)));
++
++ seq_printf(r->s, "%s%c users=%2d %-3s %9ld Hz",
++ buf, parent->set_parent ? '*' : ' ',
++ parent->users,
++ parent->users ? "on" : "off", /* NOTE: not-paranoid!! */
++ clk_get_rate(parent));
++ if (parent->dev)
++ seq_printf(r->s, ", for %s", parent->dev->bus_id);
++ seq_printf(r->s, "\n");
++
++ /* cost of this scan is small, but not linear... */
++ r->nest = nest + NEST_DELTA;
++ for (i = 3; i < at32_nr_clocks; i++) {
++ clk = at32_clock_list[i];
++ if (clk->parent == parent)
++ dump_clock(clk, r);
++ }
++ r->nest = nest;
++}
++
++static int clk_show(struct seq_file *s, void *unused)
++{
++ struct clkinf r;
++ int i;
++
++ /* show all the power manager registers */
++ seq_printf(s, "MCCTRL = %8x\n", pm_readl(MCCTRL));
++ seq_printf(s, "CKSEL = %8x\n", pm_readl(CKSEL));
++ seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPU_MASK));
++ seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSB_MASK));
++ seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBA_MASK));
++ seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBB_MASK));
++ seq_printf(s, "PLL0 = %8x\n", pm_readl(PLL0));
++ seq_printf(s, "PLL1 = %8x\n", pm_readl(PLL1));
++ seq_printf(s, "IMR = %8x\n", pm_readl(IMR));
++ for (i = 0; i < 8; i++) {
++ if (i == 5)
++ continue;
++ seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL(i)));
++ }
++
++ seq_printf(s, "\n");
++
++ /* show clock tree as derived from the three oscillators
++ * we "know" are at the head of the list
++ */
++ r.s = s;
++ r.nest = 0;
++ dump_clock(at32_clock_list[0], &r);
++ dump_clock(at32_clock_list[1], &r);
++ dump_clock(at32_clock_list[2], &r);
++
++ return 0;
++}
++
++static int clk_open(struct inode *inode, struct file *file)
++{
++ return single_open(file, clk_show, NULL);
++}
++
++static const struct file_operations clk_operations = {
++ .open = clk_open,
++ .read = seq_read,
++ .llseek = seq_lseek,
++ .release = single_release,
++};
++
++static int __init clk_debugfs_init(void)
++{
++ (void) debugfs_create_file("at32ap_clk", S_IFREG | S_IRUGO,
++ NULL, NULL, &clk_operations);
++
++ return 0;
++}
++postcore_initcall(clk_debugfs_init);
++
++#endif
+diff --git a/arch/avr32/mach-at32ap/gpio-dev.c b/arch/avr32/mach-at32ap/gpio-dev.c
+new file mode 100644
+index 0000000..8cf6d11
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/gpio-dev.c
+@@ -0,0 +1,573 @@
++/*
++ * GPIO /dev and configfs interface
++ *
++ * Copyright (C) 2006-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/kernel.h>
++#include <linux/configfs.h>
++#include <linux/cdev.h>
++#include <linux/device.h>
++#include <linux/fs.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/poll.h>
++#include <linux/uaccess.h>
++#include <linux/wait.h>
++
++#include <asm/gpio.h>
++#include <asm/arch/portmux.h>
++
++#define GPIO_DEV_MAX 8
++
++static struct class *gpio_dev_class;
++static dev_t gpio_devt;
++
++struct gpio_item {
++ spinlock_t lock;
++
++ int enabled;
++ int initialized;
++ int port;
++ u32 pin_mask;
++ u32 oe_mask;
++
++ /* Pin state last time we read it (for blocking reads) */
++ u32 pin_state;
++ int changed;
++
++ wait_queue_head_t change_wq;
++ struct fasync_struct *async_queue;
++
++ int id;
++ struct class_device *gpio_dev;
++ struct cdev char_dev;
++ struct config_item item;
++};
++
++struct gpio_attribute {
++ struct configfs_attribute attr;
++ ssize_t (*show)(struct gpio_item *, char *);
++ ssize_t (*store)(struct gpio_item *, const char *, size_t);
++};
++
++static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
++{
++ struct gpio_item *gpio = dev_id;
++ u32 old_state, new_state;
++
++ old_state = gpio->pin_state;
++ new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
++ gpio->pin_state = new_state;
++
++ if (new_state != old_state) {
++ gpio->changed = 1;
++ wake_up_interruptible(&gpio->change_wq);
++
++ if (gpio->async_queue)
++ kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
++ }
++
++ return IRQ_HANDLED;
++}
++
++static int gpio_dev_open(struct inode *inode, struct file *file)
++{
++ struct gpio_item *gpio = container_of(inode->i_cdev,
++ struct gpio_item,
++ char_dev);
++ unsigned int irq;
++ unsigned int i;
++ int ret;
++
++ nonseekable_open(inode, file);
++ config_item_get(&gpio->item);
++ file->private_data = gpio;
++
++ gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
++ gpio->pin_mask);
++ gpio->changed = 1;
++
++ for (i = 0; i < 32; i++) {
++ if (gpio->pin_mask & (1 << i)) {
++ irq = gpio_to_irq(32 * gpio->port + i);
++ ret = request_irq(irq, gpio_dev_interrupt, 0,
++ "gpio-dev", gpio);
++ if (ret)
++ goto err_irq;
++ }
++ }
++
++ return 0;
++
++err_irq:
++ while (i--) {
++ if (gpio->pin_mask & (1 << i)) {
++ irq = gpio_to_irq(32 * gpio->port + i);
++ free_irq(irq, gpio);
++ }
++ }
++
++ config_item_put(&gpio->item);
++
++ return ret;
++}
++
++static int gpio_dev_fasync(int fd, struct file *file, int mode)
++{
++ struct gpio_item *gpio = file->private_data;
++
++ return fasync_helper(fd, file, mode, &gpio->async_queue);
++}
++
++static int gpio_dev_release(struct inode *inode, struct file *file)
++{
++ struct gpio_item *gpio = file->private_data;
++ unsigned int irq;
++ unsigned int i;
++
++ gpio_dev_fasync(-1, file, 0);
++
++ for (i = 0; i < 32; i++) {
++ if (gpio->pin_mask & (1 << i)) {
++ irq = gpio_to_irq(32 * gpio->port + i);
++ free_irq(irq, gpio);
++ }
++ }
++
++ config_item_put(&gpio->item);
++
++ return 0;
++}
++
++static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
++{
++ struct gpio_item *gpio = file->private_data;
++ unsigned int mask = 0;
++
++ poll_wait(file, &gpio->change_wq, wait);
++ if (gpio->changed)
++ mask |= POLLIN | POLLRDNORM;
++
++ return mask;
++}
++
++static ssize_t gpio_dev_read(struct file *file, char __user *buf,
++ size_t count, loff_t *offset)
++{
++ struct gpio_item *gpio = file->private_data;
++ u32 value;
++
++ spin_lock_irq(&gpio->lock);
++ while (!gpio->changed) {
++ spin_unlock_irq(&gpio->lock);
++
++ if (file->f_flags & O_NONBLOCK)
++ return -EAGAIN;
++
++ if (wait_event_interruptible(gpio->change_wq, gpio->changed))
++ return -ERESTARTSYS;
++
++ spin_lock_irq(&gpio->lock);
++ }
++
++ gpio->changed = 0;
++ value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
++
++ spin_unlock_irq(&gpio->lock);
++
++ count = min(count, (size_t)4);
++ if (copy_to_user(buf, &value, count))
++ return -EFAULT;
++
++ return count;
++}
++
++static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
++ size_t count, loff_t *offset)
++{
++ struct gpio_item *gpio = file->private_data;
++ u32 value = 0;
++ u32 mask = ~0UL;
++
++ count = min(count, (size_t)4);
++ if (copy_from_user(&value, buf, count))
++ return -EFAULT;
++
++ /* Assuming big endian */
++ mask <<= (4 - count) * 8;
++ mask &= gpio->pin_mask;
++
++ at32_gpio_set_value_multiple(gpio->port, value, mask);
++
++ return count;
++}
++
++static struct file_operations gpio_dev_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .open = gpio_dev_open,
++ .release = gpio_dev_release,
++ .fasync = gpio_dev_fasync,
++ .poll = gpio_dev_poll,
++ .read = gpio_dev_read,
++ .write = gpio_dev_write,
++};
++
++static struct gpio_item *to_gpio_item(struct config_item *item)
++{
++ return item ? container_of(item, struct gpio_item, item) : NULL;
++}
++
++static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "%d\n", gpio->port);
++}
++
++static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ unsigned long id;
++ char *p = (char *)page;
++ ssize_t ret = -EINVAL;
++
++ id = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
++
++ /* Switching PIO is not allowed when live... */
++ spin_lock(&gpio->lock);
++ if (!gpio->enabled) {
++ ret = -ENXIO;
++ if (at32_gpio_port_is_valid(id)) {
++ gpio->port = id;
++ ret = count;
++ }
++ }
++ spin_unlock(&gpio->lock);
++
++ return ret;
++}
++
++static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "0x%08x\n", gpio->pin_mask);
++}
++
++static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ u32 new_mask;
++ char *p = (char *)page;
++ ssize_t ret = -EINVAL;
++
++ new_mask = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
++
++ /* Can't update the pin mask while live. */
++ spin_lock(&gpio->lock);
++ if (!gpio->enabled) {
++ gpio->oe_mask &= new_mask;
++ gpio->pin_mask = new_mask;
++ ret = count;
++ }
++ spin_unlock(&gpio->lock);
++
++ return ret;
++}
++
++static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "0x%08x\n", gpio->oe_mask);
++}
++
++static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ u32 mask;
++ char *p = (char *)page;
++ ssize_t ret = -EINVAL;
++
++ mask = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
++
++ spin_lock(&gpio->lock);
++ if (!gpio->enabled) {
++ gpio->oe_mask = mask & gpio->pin_mask;
++ ret = count;
++ }
++ spin_unlock(&gpio->lock);
++
++ return ret;
++}
++
++static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "%d\n", gpio->enabled);
++}
++
++static ssize_t gpio_store_enabled(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ char *p = (char *)page;
++ int enabled;
++ int ret;
++
++ enabled = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
++
++ /* make it a boolean value */
++ enabled = !!enabled;
++
++ if (gpio->enabled == enabled)
++ /* No change; do nothing. */
++ return count;
++
++ BUG_ON(gpio->id >= GPIO_DEV_MAX);
++
++ if (!enabled) {
++ class_device_unregister(gpio->gpio_dev);
++ cdev_del(&gpio->char_dev);
++ at32_deselect_pins(gpio->port, gpio->pin_mask);
++ gpio->initialized = 0;
++ } else {
++ if (gpio->port < 0 || !gpio->pin_mask)
++ return -ENODEV;
++ }
++
++ /* Disallow any updates to gpio_id or pin_mask */
++ spin_lock(&gpio->lock);
++ gpio->enabled = enabled;
++ spin_unlock(&gpio->lock);
++
++ if (!enabled)
++ return count;
++
++ /* Now, try to allocate the pins */
++ ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
++ if (ret)
++ goto err_alloc_pins;
++
++ gpio->initialized = 1;
++
++ cdev_init(&gpio->char_dev, &gpio_dev_fops);
++ gpio->char_dev.owner = THIS_MODULE;
++ ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
++ if (ret < 0)
++ goto err_cdev_add;
++ gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
++ MKDEV(MAJOR(gpio_devt), gpio->id),
++ NULL,
++ "gpio%d", gpio->id);
++ if (IS_ERR(gpio->gpio_dev)) {
++ printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
++ ret = PTR_ERR(gpio->gpio_dev);
++ goto err_class_dev;
++ }
++
++ printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
++ gpio->id, gpio->port, gpio->pin_mask,
++ MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
++
++ return 0;
++
++err_class_dev:
++ cdev_del(&gpio->char_dev);
++err_cdev_add:
++ at32_deselect_pins(gpio->port, gpio->pin_mask);
++ gpio->initialized = 0;
++err_alloc_pins:
++ spin_lock(&gpio->lock);
++ gpio->enabled = 0;
++ spin_unlock(&gpio->lock);
++
++ return ret;
++}
++
++static struct gpio_attribute gpio_item_attr_gpio_id = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "gpio_id",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_gpio_id,
++ .store = gpio_store_gpio_id,
++};
++static struct gpio_attribute gpio_item_attr_pin_mask = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "pin_mask",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_pin_mask,
++ .store = gpio_store_pin_mask,
++};
++static struct gpio_attribute gpio_item_attr_oe_mask = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "oe_mask",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_oe_mask,
++ .store = gpio_store_oe_mask,
++};
++static struct gpio_attribute gpio_item_attr_enabled = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "enabled",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_enabled,
++ .store = gpio_store_enabled,
++};
++
++static struct configfs_attribute *gpio_item_attrs[] = {
++ &gpio_item_attr_gpio_id.attr,
++ &gpio_item_attr_pin_mask.attr,
++ &gpio_item_attr_oe_mask.attr,
++ &gpio_item_attr_enabled.attr,
++ NULL,
++};
++
++static ssize_t gpio_show_attr(struct config_item *item,
++ struct configfs_attribute *attr,
++ char *page)
++{
++ struct gpio_item *gpio_item = to_gpio_item(item);
++ struct gpio_attribute *gpio_attr
++ = container_of(attr, struct gpio_attribute, attr);
++ ssize_t ret = 0;
++
++ if (gpio_attr->show)
++ ret = gpio_attr->show(gpio_item, page);
++ return ret;
++}
++
++static ssize_t gpio_store_attr(struct config_item *item,
++ struct configfs_attribute *attr,
++ const char *page, size_t count)
++{
++ struct gpio_item *gpio_item = to_gpio_item(item);
++ struct gpio_attribute *gpio_attr
++ = container_of(attr, struct gpio_attribute, attr);
++ ssize_t ret = -EINVAL;
++
++ if (gpio_attr->store)
++ ret = gpio_attr->store(gpio_item, page, count);
++ return ret;
++}
++
++static void gpio_release(struct config_item *item)
++{
++ kfree(to_gpio_item(item));
++}
++
++static struct configfs_item_operations gpio_item_ops = {
++ .release = gpio_release,
++ .show_attribute = gpio_show_attr,
++ .store_attribute = gpio_store_attr,
++};
++
++static struct config_item_type gpio_item_type = {
++ .ct_item_ops = &gpio_item_ops,
++ .ct_attrs = gpio_item_attrs,
++ .ct_owner = THIS_MODULE,
++};
++
++static struct config_item *gpio_make_item(struct config_group *group,
++ const char *name)
++{
++ static int next_id;
++ struct gpio_item *gpio;
++
++ if (next_id >= GPIO_DEV_MAX)
++ return NULL;
++
++ gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
++ if (!gpio)
++ return NULL;
++
++ gpio->id = next_id++;
++ config_item_init_type_name(&gpio->item, name, &gpio_item_type);
++ spin_lock_init(&gpio->lock);
++ init_waitqueue_head(&gpio->change_wq);
++
++ return &gpio->item;
++}
++
++static void gpio_drop_item(struct config_group *group,
++ struct config_item *item)
++{
++ struct gpio_item *gpio = to_gpio_item(item);
++
++ spin_lock(&gpio->lock);
++ if (gpio->enabled) {
++ class_device_unregister(gpio->gpio_dev);
++ cdev_del(&gpio->char_dev);
++ }
++
++ if (gpio->initialized) {
++ at32_deselect_pins(gpio->port, gpio->pin_mask);
++ gpio->initialized = 0;
++ gpio->enabled = 0;
++ }
++ spin_unlock(&gpio->lock);
++}
++
++static struct configfs_group_operations gpio_group_ops = {
++ .make_item = gpio_make_item,
++ .drop_item = gpio_drop_item,
++};
++
++static struct config_item_type gpio_group_type = {
++ .ct_group_ops = &gpio_group_ops,
++ .ct_owner = THIS_MODULE,
++};
++
++static struct configfs_subsystem gpio_subsys = {
++ .su_group = {
++ .cg_item = {
++ .ci_namebuf = "gpio",
++ .ci_type = &gpio_group_type,
++ },
++ },
++};
++
++static int __init gpio_dev_init(void)
++{
++ int err;
++
++ gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
++ if (IS_ERR(gpio_dev_class)) {
++ err = PTR_ERR(gpio_dev_class);
++ goto err_class_create;
++ }
++
++ err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
++ if (err < 0)
++ goto err_alloc_chrdev;
++
++ /* Configfs initialization */
++ config_group_init(&gpio_subsys.su_group);
++ mutex_init(&gpio_subsys.su_mutex);
++ err = configfs_register_subsystem(&gpio_subsys);
++ if (err)
++ goto err_register_subsys;
++
++ return 0;
++
++err_register_subsys:
++ unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
++err_alloc_chrdev:
++ class_destroy(gpio_dev_class);
++err_class_create:
++ printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
++ return err;
++}
++late_initcall(gpio_dev_init);
+diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
+index 5e22a75..704607f 100644
+--- a/arch/avr32/mach-at32ap/hsmc.c
++++ b/arch/avr32/mach-at32ap/hsmc.c
+@@ -29,16 +29,25 @@ struct hsmc {
+
+ static struct hsmc *hsmc;
+
+-int smc_set_configuration(int cs, const struct smc_config *config)
++void smc_set_timing(struct smc_config *config,
++ const struct smc_timing *timing)
+ {
++ int recover;
++ int cycle;
++
+ unsigned long mul;
+- unsigned long offset;
+- u32 setup, pulse, cycle, mode;
+
+- if (!hsmc)
+- return -ENODEV;
+- if (cs >= NR_CHIP_SELECTS)
+- return -EINVAL;
++ /* Reset all SMC timings */
++ config->ncs_read_setup = 0;
++ config->nrd_setup = 0;
++ config->ncs_write_setup = 0;
++ config->nwe_setup = 0;
++ config->ncs_read_pulse = 0;
++ config->nrd_pulse = 0;
++ config->ncs_write_pulse = 0;
++ config->nwe_pulse = 0;
++ config->read_cycle = 0;
++ config->write_cycle = 0;
+
+ /*
+ * cycles = x / T = x * f
+@@ -50,16 +59,102 @@ int smc_set_configuration(int cs, const struct smc_config *config)
+
+ #define ns2cyc(x) ((((x) * mul) + 65535) >> 16)
+
+- setup = (HSMC_BF(NWE_SETUP, ns2cyc(config->nwe_setup))
+- | HSMC_BF(NCS_WR_SETUP, ns2cyc(config->ncs_write_setup))
+- | HSMC_BF(NRD_SETUP, ns2cyc(config->nrd_setup))
+- | HSMC_BF(NCS_RD_SETUP, ns2cyc(config->ncs_read_setup)));
+- pulse = (HSMC_BF(NWE_PULSE, ns2cyc(config->nwe_pulse))
+- | HSMC_BF(NCS_WR_PULSE, ns2cyc(config->ncs_write_pulse))
+- | HSMC_BF(NRD_PULSE, ns2cyc(config->nrd_pulse))
+- | HSMC_BF(NCS_RD_PULSE, ns2cyc(config->ncs_read_pulse)));
+- cycle = (HSMC_BF(NWE_CYCLE, ns2cyc(config->write_cycle))
+- | HSMC_BF(NRD_CYCLE, ns2cyc(config->read_cycle)));
++ if (timing->ncs_read_setup > 0)
++ config->ncs_read_setup = ns2cyc(timing->ncs_read_setup);
++
++ if (timing->nrd_setup > 0)
++ config->nrd_setup = ns2cyc(timing->nrd_setup);
++
++ if (timing->ncs_write_setup > 0)
++ config->ncs_write_setup = ns2cyc(timing->ncs_write_setup);
++
++ if (timing->nwe_setup > 0)
++ config->nwe_setup = ns2cyc(timing->nwe_setup);
++
++ if (timing->ncs_read_pulse > 0)
++ config->ncs_read_pulse = ns2cyc(timing->ncs_read_pulse);
++
++ if (timing->nrd_pulse > 0)
++ config->nrd_pulse = ns2cyc(timing->nrd_pulse);
++
++ if (timing->ncs_write_pulse > 0)
++ config->ncs_write_pulse = ns2cyc(timing->ncs_write_pulse);
++
++ if (timing->nwe_pulse > 0)
++ config->nwe_pulse = ns2cyc(timing->nwe_pulse);
++
++ if (timing->read_cycle > 0)
++ config->read_cycle = ns2cyc(timing->read_cycle);
++
++ if (timing->write_cycle > 0)
++ config->write_cycle = ns2cyc(timing->write_cycle);
++
++ /* Extend read cycle in needed */
++ if (timing->ncs_read_recover > 0)
++ recover = ns2cyc(timing->ncs_read_recover);
++ else
++ recover = 1;
++
++ cycle = config->ncs_read_setup + config->ncs_read_pulse + recover;
++
++ if (config->read_cycle < cycle)
++ config->read_cycle = cycle;
++
++ /* Extend read cycle in needed */
++ if (timing->nrd_recover > 0)
++ recover = ns2cyc(timing->nrd_recover);
++ else
++ recover = 1;
++
++ cycle = config->nrd_setup + config->nrd_pulse + recover;
++
++ if (config->read_cycle < cycle)
++ config->read_cycle = cycle;
++
++ /* Extend write cycle in needed */
++ if (timing->ncs_write_recover > 0)
++ recover = ns2cyc(timing->ncs_write_recover);
++ else
++ recover = 1;
++
++ cycle = config->ncs_write_setup + config->ncs_write_pulse + recover;
++
++ if (config->write_cycle < cycle)
++ config->write_cycle = cycle;
++
++ /* Extend write cycle in needed */
++ if (timing->nwe_recover > 0)
++ recover = ns2cyc(timing->nwe_recover);
++ else
++ recover = 1;
++
++ cycle = config->nwe_setup + config->nwe_pulse + recover;
++
++ if (config->write_cycle < cycle)
++ config->write_cycle = cycle;
++}
++EXPORT_SYMBOL(smc_set_timing);
++
++int smc_set_configuration(int cs, const struct smc_config *config)
++{
++ unsigned long offset;
++ u32 setup, pulse, cycle, mode;
++
++ if (!hsmc)
++ return -ENODEV;
++ if (cs >= NR_CHIP_SELECTS)
++ return -EINVAL;
++
++ setup = (HSMC_BF(NWE_SETUP, config->nwe_setup)
++ | HSMC_BF(NCS_WR_SETUP, config->ncs_write_setup)
++ | HSMC_BF(NRD_SETUP, config->nrd_setup)
++ | HSMC_BF(NCS_RD_SETUP, config->ncs_read_setup));
++ pulse = (HSMC_BF(NWE_PULSE, config->nwe_pulse)
++ | HSMC_BF(NCS_WR_PULSE, config->ncs_write_pulse)
++ | HSMC_BF(NRD_PULSE, config->nrd_pulse)
++ | HSMC_BF(NCS_RD_PULSE, config->ncs_read_pulse));
++ cycle = (HSMC_BF(NWE_CYCLE, config->write_cycle)
++ | HSMC_BF(NRD_CYCLE, config->read_cycle));
+
+ switch (config->bus_width) {
+ case 1:
+diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
+index 1eb99b8..c978c36 100644
+--- a/arch/avr32/mach-at32ap/pio.c
++++ b/arch/avr32/mach-at32ap/pio.c
+@@ -110,6 +110,10 @@ void __init at32_select_gpio(unsigned int pin, unsigned long flags)
+ pio_writel(pio, SODR, mask);
+ else
+ pio_writel(pio, CODR, mask);
++ if (flags & AT32_GPIOF_MULTIDRV)
++ pio_writel(pio, MDER, mask);
++ else
++ pio_writel(pio, MDDR, mask);
+ pio_writel(pio, PUDR, mask);
+ pio_writel(pio, OER, mask);
+ } else {
+@@ -158,6 +162,82 @@ fail:
+ dump_stack();
+ }
+
++#ifdef CONFIG_GPIO_DEV
++
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port)
++{
++ return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
++}
++
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
++{
++ struct pio_device *pio;
++ u32 old, new;
++
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
++
++ /* Try to allocate the pins */
++ do {
++ old = pio->pinmux_mask;
++ if (old & pins)
++ return -EBUSY;
++
++ new = old | pins;
++ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++
++ /* That went well, now configure the port */
++ pio_writel(pio, OER, oe_mask);
++ pio_writel(pio, PER, pins);
++
++ return 0;
++}
++
++void at32_deselect_pins(unsigned int port, u32 pins)
++{
++ struct pio_device *pio;
++ u32 old, new;
++
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++ /* Return to a "safe" mux configuration */
++ pio_writel(pio, PUER, pins);
++ pio_writel(pio, ODR, pins);
++
++ /* Deallocate the pins */
++ do {
++ old = pio->pinmux_mask;
++ new = old & ~pins;
++ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++}
++
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
++{
++ struct pio_device *pio;
++
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++ return pio_readl(pio, PDSR) & pins;
++}
++
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
++{
++ struct pio_device *pio;
++
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++ /* No atomic updates for now... */
++ pio_writel(pio, CODR, ~value & mask);
++ pio_writel(pio, SODR, value & mask);
++}
++
++#endif /* CONFIG_GPIO_DEV */
++
++
+ /*--------------------------------------------------------------------------*/
+
+ /* GPIO API */
+diff --git a/arch/avr32/mach-at32ap/pm.h b/arch/avr32/mach-at32ap/pm.h
+index a1f8ace..47efd0d 100644
+--- a/arch/avr32/mach-at32ap/pm.h
++++ b/arch/avr32/mach-at32ap/pm.h
+@@ -4,6 +4,14 @@
+ #ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
+ #define __ARCH_AVR32_MACH_AT32AP_PM_H__
+
++/*
++ * We can reduce the code size a bit by using a constant here. Since
++ * this file is only used on AVR32 AP CPUs with segmentation enabled,
++ * it's safe to not use ioremap. Generic drivers should of course
++ * never do this.
++ */
++#define AT32_PM_BASE 0xfff00000
++
+ /* PM register offsets */
+ #define PM_MCCTRL 0x0000
+ #define PM_CKSEL 0x0004
+diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c
+index 099212d..26f29c6 100644
+--- a/arch/avr32/mm/dma-coherent.c
++++ b/arch/avr32/mm/dma-coherent.c
+@@ -41,6 +41,13 @@ static struct page *__dma_alloc(struct device *dev, size_t size,
+ struct page *page, *free, *end;
+ int order;
+
++ /* Following is a work-around (a.k.a. hack) to prevent pages
++ * with __GFP_COMP being passed to split_page() which cannot
++ * handle them. The real problem is that this flag probably
++ * should be 0 on AVR32 as it is not supported on this
++ * platform--see CONFIG_HUGETLB_PAGE. */
++ gfp &= ~(__GFP_COMP);
++
+ size = PAGE_ALIGN(size);
+ order = get_order(size);
+
+diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
+index 82cf708..480760b 100644
+--- a/arch/avr32/mm/init.c
++++ b/arch/avr32/mm/init.c
+@@ -224,19 +224,9 @@ void free_initmem(void)
+
+ #ifdef CONFIG_BLK_DEV_INITRD
+
+-static int keep_initrd;
+-
+ void free_initrd_mem(unsigned long start, unsigned long end)
+ {
+- if (!keep_initrd)
+- free_area(start, end, "initrd");
+-}
+-
+-static int __init keepinitrd_setup(char *__unused)
+-{
+- keep_initrd = 1;
+- return 1;
++ free_area(start, end, "initrd");
+ }
+
+-__setup("keepinitrd", keepinitrd_setup);
+ #endif
+diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
+index 37bddc1..8c30dec 100644
+--- a/drivers/char/watchdog/Kconfig
++++ b/drivers/char/watchdog/Kconfig
+@@ -223,7 +223,7 @@ config DAVINCI_WATCHDOG
+
+ config AT32AP700X_WDT
+ tristate "AT32AP700x watchdog"
+- depends on CPU_AT32AP7000
++ depends on CPU_AT32AP700X
+ help
+ Watchdog timer embedded into AT32AP700x devices. This will reboot
+ your system when the timeout is reached.
+diff --git a/drivers/char/watchdog/at32ap700x_wdt.c b/drivers/char/watchdog/at32ap700x_wdt.c
+index 54a5161..fb5ed64 100644
+--- a/drivers/char/watchdog/at32ap700x_wdt.c
++++ b/drivers/char/watchdog/at32ap700x_wdt.c
+@@ -6,6 +6,19 @@
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
++ *
++ *
++ * Errata: WDT Clear is blocked after WDT Reset
++ *
++ * A watchdog timer event will, after reset, block writes to the WDT_CLEAR
++ * register, preventing the program to clear the next Watchdog Timer Reset.
++ *
++ * If you still want to use the WDT after a WDT reset a small code can be
++ * insterted at the startup checking the AVR32_PM.rcause register for WDT reset
++ * and use a GPIO pin to reset the system. This method requires that one of the
++ * GPIO pins are available and connected externally to the RESET_N pin. After
++ * the GPIO pin has pulled down the reset line the GPIO will be reset and leave
++ * the pin tristated with pullup.
+ */
+
+ #include <linux/init.h>
+@@ -44,6 +57,13 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+
+ #define WDT_CLR 0x04
+
++#define WDT_RCAUSE 0x10
++#define WDT_RCAUSE_POR 0
++#define WDT_RCAUSE_EXT 2
++#define WDT_RCAUSE_WDT 3
++#define WDT_RCAUSE_JTAG 4
++#define WDT_RCAUSE_SERP 5
++
+ #define WDT_BIT(name) (1 << WDT_##name)
+ #define WDT_BF(name, value) ((value) << WDT_##name)
+
+@@ -56,6 +76,7 @@ struct wdt_at32ap700x {
+ void __iomem *regs;
+ spinlock_t io_lock;
+ int timeout;
++ int boot_status;
+ unsigned long users;
+ struct miscdevice miscdev;
+ };
+@@ -126,7 +147,7 @@ static int at32_wdt_close(struct inode *inode, struct file *file)
+ at32_wdt_stop();
+ } else {
+ dev_dbg(wdt->miscdev.parent,
+- "Unexpected close, not stopping watchdog!\n");
++ "unexpected close, not stopping watchdog!\n");
+ at32_wdt_pat();
+ }
+ clear_bit(1, &wdt->users);
+@@ -154,6 +175,33 @@ static int at32_wdt_settimeout(int time)
+ return 0;
+ }
+
++/*
++ * Get the watchdog status.
++ */
++static int at32_wdt_get_status(void)
++{
++ int rcause;
++ int status = 0;
++
++ rcause = wdt_readl(wdt, RCAUSE);
++
++ switch (rcause) {
++ case WDT_BIT(RCAUSE_EXT):
++ status = WDIOF_EXTERN1;
++ break;
++ case WDT_BIT(RCAUSE_WDT):
++ status = WDIOF_CARDRESET;
++ break;
++ case WDT_BIT(RCAUSE_POR): /* fall through */
++ case WDT_BIT(RCAUSE_JTAG): /* fall through */
++ case WDT_BIT(RCAUSE_SERP): /* fall through */
++ default:
++ break;
++ }
++
++ return status;
++}
++
+ static struct watchdog_info at32_wdt_info = {
+ .identity = "at32ap700x watchdog",
+ .options = WDIOF_SETTIMEOUT |
+@@ -194,10 +242,12 @@ static int at32_wdt_ioctl(struct inode *inode, struct file *file,
+ case WDIOC_GETTIMEOUT:
+ ret = put_user(wdt->timeout, p);
+ break;
+- case WDIOC_GETSTATUS: /* fall through */
+- case WDIOC_GETBOOTSTATUS:
++ case WDIOC_GETSTATUS:
+ ret = put_user(0, p);
+ break;
++ case WDIOC_GETBOOTSTATUS:
++ ret = put_user(wdt->boot_status, p);
++ break;
+ case WDIOC_SETOPTIONS:
+ ret = get_user(time, p);
+ if (ret)
+@@ -282,8 +332,19 @@ static int __init at32_wdt_probe(struct platform_device *pdev)
+ dev_dbg(&pdev->dev, "could not map I/O memory\n");
+ goto err_free;
+ }
++
+ spin_lock_init(&wdt->io_lock);
+- wdt->users = 0;
++ wdt->boot_status = at32_wdt_get_status();
++
++ /* Work-around for watchdog silicon errata. */
++ if (wdt->boot_status & WDIOF_CARDRESET) {
++ dev_info(&pdev->dev, "CPU must be reset with external "
++ "reset or POR due to silicon errata.\n");
++ ret = -EIO;
++ goto err_iounmap;
++ } else {
++ wdt->users = 0;
++ }
+ wdt->miscdev.minor = WATCHDOG_MINOR;
+ wdt->miscdev.name = "watchdog";
+ wdt->miscdev.fops = &at32_wdt_fops;
+diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
+index 9f3a4cd..6f5bcd6 100644
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -80,6 +80,14 @@ config I2C_AT91
+ This supports the use of the I2C interface on Atmel AT91
+ processors.
+
++config I2C_ATMELTWI
++ tristate "Atmel Two-Wire Interface (TWI)"
++ depends on I2C && (ARCH_AT91 || PLATFORM_AT32AP)
++ help
++ Atmel on-chip TWI controller. Say Y if you have an AT32 or
++ AT91-based device and want to use its built-in TWI
++ functionality.
++
+ config I2C_AU1550
+ tristate "Au1550/Au1200 SMBus interface"
+ depends on SOC_AU1550 || SOC_AU1200
+diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
+index 5b752e4..e4644a8 100644
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -52,6 +52,7 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
+ obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
+ obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
++obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
+
+ ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+ EXTRA_CFLAGS += -DDEBUG
+diff --git a/drivers/i2c/busses/i2c-atmeltwi.c b/drivers/i2c/busses/i2c-atmeltwi.c
+new file mode 100644
+index 0000000..3f78b31
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-atmeltwi.c
+@@ -0,0 +1,436 @@
++/*
++ * i2c Support for Atmel's Two-Wire Interface (TWI)
++ *
++ * Based on the work of Copyright (C) 2004 Rick Bronson
++ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
++ * Ported to AVR32 and heavily modified by Espen Krangnes
++ * <ekrangnes at atmel.com>
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * Borrowed heavily from the original work by:
++ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
++ *
++ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
++ * bugs removed, interrupt routine markedly rewritten
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++#undef VERBOSE_DEBUG
++
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/i2c.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/completion.h>
++#include <linux/io.h>
++
++#include "i2c-atmeltwi.h"
++
++static unsigned int baudrate = 100 * 1000;
++module_param(baudrate, uint, S_IRUGO);
++MODULE_PARM_DESC(baudrate, "The TWI baudrate");
++
++
++struct atmel_twi {
++ void __iomem *regs;
++ struct i2c_adapter adapter;
++ struct clk *pclk;
++ struct completion comp;
++ u32 mask;
++ u8 *buf;
++ u16 len;
++ u16 acks_left;
++ int status;
++ unsigned int irq;
++
++};
++#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
++
++/*
++ * (Re)Initialize the TWI hardware registers.
++ */
++static int twi_hwinit(struct atmel_twi *twi)
++{
++ unsigned long cdiv, ckdiv = 0;
++
++ /* REVISIT: wait till SCL is high before resetting; otherwise,
++ * some versions will wedge forever.
++ */
++
++ twi_writel(twi, IDR, ~0UL);
++ twi_writel(twi, CR, TWI_BIT(SWRST)); /*Reset peripheral*/
++ twi_readl(twi, SR);
++
++ cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
++
++ while (cdiv > 255) {
++ ckdiv++;
++ cdiv = cdiv >> 1;
++ }
++
++ /* REVISIT: there are various errata to consider re CDIV and CHDIV
++ * here, at least on at91 parts.
++ */
++
++ if (ckdiv > 7)
++ return -EINVAL;
++ else
++ twi_writel(twi, CWGR, TWI_BF(CKDIV, ckdiv)
++ | TWI_BF(CHDIV, cdiv)
++ | TWI_BF(CLDIV, cdiv));
++ return 0;
++}
++
++/*
++ * Waits for the i2c status register to set the specified bitmask
++ * Returns 0 if timed out ... ~100ms is much longer than the SMBus
++ * limit, but I2C has no limit at all.
++ */
++static int twi_complete(struct atmel_twi *twi, u32 mask)
++{
++ int timeout = msecs_to_jiffies(100);
++
++ mask |= TWI_BIT(TXCOMP);
++ twi->mask = mask | TWI_BIT(NACK) | TWI_BIT(OVRE);
++ init_completion(&twi->comp);
++
++ twi_writel(twi, IER, mask);
++
++ if (!wait_for_completion_timeout(&twi->comp, timeout)) {
++ /* RESET TWI interface */
++ twi_writel(twi, CR, TWI_BIT(SWRST));
++
++ /* Reinitialize TWI */
++ twi_hwinit(twi);
++
++ return -ETIMEDOUT;
++ }
++ return 0;
++}
++
++/*
++ * Generic i2c master transfer entrypoint.
++ */
++static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num)
++{
++ struct atmel_twi *twi = to_atmel_twi(adap);
++ int i;
++
++ dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
++
++ twi->status = 0;
++ for (i = 0; i < num; i++, pmsg++) {
++ twi->len = pmsg->len;
++ twi->buf = pmsg->buf;
++ twi->acks_left = pmsg->len;
++ twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
++ (pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
++ twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
++
++ dev_dbg(&adap->dev,
++ "#%d: %s %d byte%s %s dev 0x%02x\n",
++ i,
++ pmsg->flags & I2C_M_RD ? "reading" : "writing",
++ pmsg->len,
++ pmsg->len > 1 ? "s" : "",
++ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
++
++ /* enable */
++ twi_writel(twi, CR, TWI_BIT(MSEN));
++
++ if (pmsg->flags & I2C_M_RD) {
++ /* cleanup after previous RX overruns */
++ while (twi_readl(twi, SR) & TWI_BIT(RXRDY))
++ twi_readl(twi, RHR);
++
++ if (twi->len == 1)
++ twi_writel(twi, CR,
++ TWI_BIT(START) | TWI_BIT(STOP));
++ else
++ twi_writel(twi, CR, TWI_BIT(START));
++
++ if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
++ dev_dbg(&adap->dev, "RX[%d] timeout. "
++ "Stopped with %d bytes left\n",
++ i, twi->acks_left);
++ return -ETIMEDOUT;
++ }
++ } else {
++ twi_writel(twi, THR, twi->buf[0]);
++ twi->acks_left--;
++ /* REVISIT: some chips don't start automagically:
++ * twi_writel(twi, CR, TWI_BIT(START));
++ */
++ if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
++ dev_dbg(&adap->dev, "TX[%d] timeout. "
++ "Stopped with %d bytes left\n",
++ i, twi->acks_left);
++ return -ETIMEDOUT;
++ }
++ /* REVISIT: an erratum workaround may be needed here;
++ * see sam9261 "STOP not generated" (START either).
++ */
++ }
++
++ /* Disable TWI interface */
++ twi_writel(twi, CR, TWI_BIT(MSDIS));
++
++ if (twi->status)
++ return twi->status;
++
++ /* WARNING: This driver lies about properly supporting
++ * repeated start, or it would *ALWAYS* return here. It
++ * has issued a STOP. Continuing is a false claim -- that
++ * a second (or third, etc.) message is part of the same
++ * "combined" (no STOPs between parts) message.
++ */
++
++ } /* end cur msg */
++
++ return i;
++}
++
++
++static irqreturn_t twi_interrupt(int irq, void *dev_id)
++{
++ struct atmel_twi *twi = dev_id;
++ int status = twi_readl(twi, SR);
++
++ /* Save state for later debug prints */
++ int old_status = status;
++
++ if (twi->mask & status) {
++
++ status &= twi->mask;
++
++ if (status & TWI_BIT(RXRDY)) {
++ if ((status & TWI_BIT(OVRE)) && twi->acks_left) {
++ /* Note weakness in fault reporting model:
++ * we can't say "the first N of these data
++ * bytes are valid".
++ */
++ dev_err(&twi->adapter.dev,
++ "OVERRUN RX! %04x, lost %d\n",
++ old_status, twi->acks_left);
++ twi->acks_left = 0;
++ twi_writel(twi, CR, TWI_BIT(STOP));
++ twi->status = -EOVERFLOW;
++ } else if (twi->acks_left > 0) {
++ twi->buf[twi->len - twi->acks_left] =
++ twi_readl(twi, RHR);
++ twi->acks_left--;
++ }
++ if (status & TWI_BIT(TXCOMP))
++ goto done;
++ if (twi->acks_left == 1)
++ twi_writel(twi, CR, TWI_BIT(STOP));
++
++ } else if (status & (TWI_BIT(NACK) | TWI_BIT(TXCOMP))) {
++ goto done;
++
++ } else if (status & TWI_BIT(TXRDY)) {
++ if (twi->acks_left > 0) {
++ twi->acks_left--;
++ twi_writel(twi, THR,
++ twi->buf[twi->len - twi->acks_left]);
++ } else
++ twi_writel(twi, CR, TWI_BIT(STOP));
++ }
++
++ if (twi->acks_left == 0)
++ twi_writel(twi, IDR, ~TWI_BIT(TXCOMP));
++ }
++
++ /* enabling this message helps trigger overruns/underruns ... */
++ dev_vdbg(&twi->adapter.dev,
++ "ISR: SR 0x%04X, mask 0x%04X, acks %i\n",
++ old_status,
++ twi->acks_left ? twi->mask : TWI_BIT(TXCOMP),
++ twi->acks_left);
++
++ return IRQ_HANDLED;
++
++done:
++ /* Note weak fault reporting model: we can't report how many
++ * bytes we sent before the NAK, or let upper layers choose
++ * whether to continue. The I2C stack doesn't allow that...
++ */
++ if (status & TWI_BIT(NACK)) {
++ dev_dbg(&twi->adapter.dev, "NACK received! %d to go\n",
++ twi->acks_left);
++ twi->status = -EPIPE;
++
++ /* TX underrun morphs automagically into a premature STOP;
++ * we'll probably observe UVRE even when it's not documented.
++ */
++ } else if (twi->acks_left && (twi->mask & TWI_BIT(TXRDY))) {
++ dev_err(&twi->adapter.dev, "UNDERRUN TX! %04x, %d to go\n",
++ old_status, twi->acks_left);
++ twi->status = -ENOSR;
++ }
++
++ twi_writel(twi, IDR, ~0UL);
++ complete(&twi->comp);
++
++ dev_dbg(&twi->adapter.dev, "ISR: SR 0x%04X, acks %i --> %d\n",
++ old_status, twi->acks_left, twi->status);
++
++ return IRQ_HANDLED;
++}
++
++
++/*
++ * Return list of supported functionality.
++ *
++ * NOTE: see warning above about repeated starts; this driver is falsely
++ * claiming to support "combined" transfers. The mid-message STOPs mean
++ * some slaves will never work with this driver. (Use i2c-gpio...)
++ */
++static u32 twi_func(struct i2c_adapter *adapter)
++{
++ return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL)
++ & ~I2C_FUNC_SMBUS_QUICK;
++}
++
++static struct i2c_algorithm twi_algorithm = {
++ .master_xfer = twi_xfer,
++ .functionality = twi_func,
++};
++
++/*
++ * Main initialization routine.
++ */
++static int __init twi_probe(struct platform_device *pdev)
++{
++ struct atmel_twi *twi;
++ struct resource *regs;
++ struct clk *pclk;
++ struct i2c_adapter *adapter;
++ int rc, irq;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++
++ pclk = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(pclk))
++ return PTR_ERR(pclk);
++ clk_enable(pclk);
++
++ rc = -ENOMEM;
++ twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
++ if (!twi) {
++ dev_dbg(&pdev->dev, "can't allocate interface!\n");
++ goto err_alloc_twi;
++ }
++
++ twi->pclk = pclk;
++ twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!twi->regs)
++ goto err_ioremap;
++
++ irq = platform_get_irq(pdev, 0);
++ rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
++ if (rc) {
++ dev_dbg(&pdev->dev, "can't bind irq!\n");
++ goto err_irq;
++ }
++ twi->irq = irq;
++
++ rc = twi_hwinit(twi);
++ if (rc) {
++ dev_err(&pdev->dev, "Unable to set baudrate\n");
++ goto err_hw_init;
++ }
++
++ adapter = &twi->adapter;
++ sprintf(adapter->name, "TWI");
++ adapter->algo = &twi_algorithm;
++ adapter->class = I2C_CLASS_ALL;
++ adapter->nr = pdev->id;
++ adapter->dev.parent = &pdev->dev;
++
++ platform_set_drvdata(pdev, twi);
++
++ rc = i2c_add_numbered_adapter(adapter);
++ if (rc) {
++ dev_dbg(&pdev->dev, "Adapter %s registration failed\n",
++ adapter->name);
++ goto err_register;
++ }
++
++ dev_info(&pdev->dev,
++ "Atmel TWI/I2C adapter (baudrate %dk) at 0x%08lx.\n",
++ baudrate/1000, (unsigned long)regs->start);
++
++ return 0;
++
++
++err_register:
++ platform_set_drvdata(pdev, NULL);
++
++err_hw_init:
++ free_irq(irq, twi);
++
++err_irq:
++ iounmap(twi->regs);
++
++err_ioremap:
++ kfree(twi);
++
++err_alloc_twi:
++ clk_disable(pclk);
++ clk_put(pclk);
++
++ return rc;
++}
++
++static int __exit twi_remove(struct platform_device *pdev)
++{
++ struct atmel_twi *twi = platform_get_drvdata(pdev);
++ int res;
++
++ platform_set_drvdata(pdev, NULL);
++ res = i2c_del_adapter(&twi->adapter);
++ twi_writel(twi, CR, TWI_BIT(MSDIS));
++ iounmap(twi->regs);
++ clk_disable(twi->pclk);
++ clk_put(twi->pclk);
++ free_irq(twi->irq, twi);
++ kfree(twi);
++
++ return res;
++}
++
++static struct platform_driver twi_driver = {
++ .remove = __exit_p(twi_remove),
++ .driver = {
++ .name = "atmel_twi",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init atmel_twi_init(void)
++{
++ return platform_driver_probe(&twi_driver, twi_probe);
++}
++
++static void __exit atmel_twi_exit(void)
++{
++ platform_driver_unregister(&twi_driver);
++}
++
++module_init(atmel_twi_init);
++module_exit(atmel_twi_exit);
++
++MODULE_AUTHOR("Espen Krangnes");
++MODULE_DESCRIPTION("I2C driver for Atmel TWI");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/i2c/busses/i2c-atmeltwi.h b/drivers/i2c/busses/i2c-atmeltwi.h
+new file mode 100644
+index 0000000..1aca065
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-atmeltwi.h
+@@ -0,0 +1,117 @@
++/*
++ * Register definitions for the Atmel Two-Wire Interface
++ */
++
++#ifndef __ATMELTWI_H__
++#define __ATMELTWI_H__
++
++/* TWI register offsets */
++#define TWI_CR 0x0000
++#define TWI_MMR 0x0004
++#define TWI_SMR 0x0008
++#define TWI_IADR 0x000c
++#define TWI_CWGR 0x0010
++#define TWI_SR 0x0020
++#define TWI_IER 0x0024
++#define TWI_IDR 0x0028
++#define TWI_IMR 0x002c
++#define TWI_RHR 0x0030
++#define TWI_THR 0x0034
++
++/* Bitfields in CR */
++#define TWI_START_OFFSET 0
++#define TWI_START_SIZE 1
++#define TWI_STOP_OFFSET 1
++#define TWI_STOP_SIZE 1
++#define TWI_MSEN_OFFSET 2
++#define TWI_MSEN_SIZE 1
++#define TWI_MSDIS_OFFSET 3
++#define TWI_MSDIS_SIZE 1
++#define TWI_SVEN_OFFSET 4
++#define TWI_SVEN_SIZE 1
++#define TWI_SVDIS_OFFSET 5
++#define TWI_SVDIS_SIZE 1
++#define TWI_SWRST_OFFSET 7
++#define TWI_SWRST_SIZE 1
++
++/* Bitfields in MMR */
++#define TWI_IADRSZ_OFFSET 8
++#define TWI_IADRSZ_SIZE 2
++#define TWI_MREAD_OFFSET 12
++#define TWI_MREAD_SIZE 1
++#define TWI_DADR_OFFSET 16
++#define TWI_DADR_SIZE 7
++
++/* Bitfields in SMR */
++#define TWI_SADR_OFFSET 16
++#define TWI_SADR_SIZE 7
++
++/* Bitfields in IADR */
++#define TWI_IADR_OFFSET 0
++#define TWI_IADR_SIZE 24
++
++/* Bitfields in CWGR */
++#define TWI_CLDIV_OFFSET 0
++#define TWI_CLDIV_SIZE 8
++#define TWI_CHDIV_OFFSET 8
++#define TWI_CHDIV_SIZE 8
++#define TWI_CKDIV_OFFSET 16
++#define TWI_CKDIV_SIZE 3
++
++/* Bitfields in SR */
++#define TWI_TXCOMP_OFFSET 0
++#define TWI_TXCOMP_SIZE 1
++#define TWI_RXRDY_OFFSET 1
++#define TWI_RXRDY_SIZE 1
++#define TWI_TXRDY_OFFSET 2
++#define TWI_TXRDY_SIZE 1
++#define TWI_SVDIR_OFFSET 3
++#define TWI_SVDIR_SIZE 1
++#define TWI_SVACC_OFFSET 4
++#define TWI_SVACC_SIZE 1
++#define TWI_GCACC_OFFSET 5
++#define TWI_GCACC_SIZE 1
++#define TWI_OVRE_OFFSET 6
++#define TWI_OVRE_SIZE 1
++#define TWI_UNRE_OFFSET 7
++#define TWI_UNRE_SIZE 1
++#define TWI_NACK_OFFSET 8
++#define TWI_NACK_SIZE 1
++#define TWI_ARBLST_OFFSET 9
++#define TWI_ARBLST_SIZE 1
++
++/* Bitfields in RHR */
++#define TWI_RXDATA_OFFSET 0
++#define TWI_RXDATA_SIZE 8
++
++/* Bitfields in THR */
++#define TWI_TXDATA_OFFSET 0
++#define TWI_TXDATA_SIZE 8
++
++/* Constants for IADRSZ */
++#define TWI_IADRSZ_NO_ADDR 0
++#define TWI_IADRSZ_ONE_BYTE 1
++#define TWI_IADRSZ_TWO_BYTES 2
++#define TWI_IADRSZ_THREE_BYTES 3
++
++/* Bit manipulation macros */
++#define TWI_BIT(name) \
++ (1 << TWI_##name##_OFFSET)
++#define TWI_BF(name, value) \
++ (((value) & ((1 << TWI_##name##_SIZE) - 1)) \
++ << TWI_##name##_OFFSET)
++#define TWI_BFEXT(name, value) \
++ (((value) >> TWI_##name##_OFFSET) \
++ & ((1 << TWI_##name##_SIZE) - 1))
++#define TWI_BFINS(name, value, old) \
++ (((old) & ~(((1 << TWI_##name##_SIZE) - 1) \
++ << TWI_##name##_OFFSET)) \
++ | TWI_BF(name, (value)))
++
++/* Register access macros */
++#define twi_readl(port, reg) \
++ __raw_readl((port)->regs + TWI_##reg)
++#define twi_writel(port, reg, value) \
++ __raw_writel((value), (port)->regs + TWI_##reg)
++
++#endif /* __ATMELTWI_H__ */
+diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
+index 73e248f..9e848cc 100644
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -202,5 +202,14 @@ config THINKPAD_ACPI_BAY
+
+ If you are not sure, say Y here.
+
++config ATMEL_SSC
++ tristate "Device driver for Atmel SSC peripheral"
++ depends on AVR32 || ARCH_AT91
++ ---help---
++ This option enables device driver support for Atmel Syncronized
++ Serial Communication peripheral (SSC).
++
++ The SSC peripheral supports a wide variety of serial frame based
++ communications, i.e. I2S, SPI, etc.
+
+ endif # MISC_DEVICES
+diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
+index b5ce0e3..40d8ed1 100644
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -15,3 +15,4 @@ obj-$(CONFIG_SGI_IOC4) += ioc4.o
+ obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
+ obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o
+ obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
++obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
+diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
+new file mode 100644
+index 0000000..058ccac
+--- /dev/null
++++ b/drivers/misc/atmel-ssc.c
+@@ -0,0 +1,174 @@
++/*
++ * Atmel SSC driver
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/list.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/list.h>
++#include <linux/spinlock.h>
++#include <linux/atmel-ssc.h>
++
++/* Serialize access to ssc_list and user count */
++static DEFINE_SPINLOCK(user_lock);
++static LIST_HEAD(ssc_list);
++
++struct ssc_device *ssc_request(unsigned int ssc_num)
++{
++ int ssc_valid = 0;
++ struct ssc_device *ssc;
++
++ spin_lock(&user_lock);
++ list_for_each_entry(ssc, &ssc_list, list) {
++ if (ssc->pdev->id == ssc_num) {
++ ssc_valid = 1;
++ break;
++ }
++ }
++
++ if (!ssc_valid) {
++ spin_unlock(&user_lock);
++ dev_dbg(&ssc->pdev->dev, "could not find requested device\n");
++ return ERR_PTR(-ENODEV);
++ }
++
++ if (ssc->user) {
++ spin_unlock(&user_lock);
++ dev_dbg(&ssc->pdev->dev, "module busy\n");
++ return ERR_PTR(-EBUSY);
++ }
++ ssc->user++;
++ spin_unlock(&user_lock);
++
++ clk_enable(ssc->clk);
++
++ return ssc;
++}
++EXPORT_SYMBOL(ssc_request);
++
++void ssc_free(struct ssc_device *ssc)
++{
++ spin_lock(&user_lock);
++ if (ssc->user) {
++ ssc->user--;
++ clk_disable(ssc->clk);
++ } else {
++ dev_dbg(&ssc->pdev->dev, "device already free\n");
++ }
++ spin_unlock(&user_lock);
++}
++EXPORT_SYMBOL(ssc_free);
++
++static int __init ssc_probe(struct platform_device *pdev)
++{
++ int retval = 0;
++ struct resource *regs;
++ struct ssc_device *ssc;
++
++ ssc = kzalloc(sizeof(struct ssc_device), GFP_KERNEL);
++ if (!ssc) {
++ dev_dbg(&pdev->dev, "out of memory\n");
++ retval = -ENOMEM;
++ goto out;
++ }
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs) {
++ dev_dbg(&pdev->dev, "no mmio resource defined\n");
++ retval = -ENXIO;
++ goto out_free;
++ }
++
++ ssc->clk = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(ssc->clk)) {
++ dev_dbg(&pdev->dev, "no pclk clock defined\n");
++ retval = -ENXIO;
++ goto out_free;
++ }
++
++ ssc->pdev = pdev;
++ ssc->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!ssc->regs) {
++ dev_dbg(&pdev->dev, "ioremap failed\n");
++ retval = -EINVAL;
++ goto out_clk;
++ }
++
++ /* disable all interrupts */
++ clk_enable(ssc->clk);
++ ssc_writel(ssc->regs, IDR, ~0UL);
++ ssc_readl(ssc->regs, SR);
++ clk_disable(ssc->clk);
++
++ ssc->irq = platform_get_irq(pdev, 0);
++ if (!ssc->irq) {
++ dev_dbg(&pdev->dev, "could not get irq\n");
++ retval = -ENXIO;
++ goto out_unmap;
++ }
++
++ spin_lock(&user_lock);
++ list_add_tail(&ssc->list, &ssc_list);
++ spin_unlock(&user_lock);
++
++ platform_set_drvdata(pdev, ssc);
++
++ dev_info(&pdev->dev, "Atmel SSC device at 0x%p (irq %d)\n",
++ ssc->regs, ssc->irq);
++
++ goto out;
++
++out_unmap:
++ iounmap(ssc->regs);
++out_clk:
++ clk_put(ssc->clk);
++out_free:
++ kfree(ssc);
++out:
++ return retval;
++}
++
++static int __devexit ssc_remove(struct platform_device *pdev)
++{
++ struct ssc_device *ssc = platform_get_drvdata(pdev);
++
++ spin_lock(&user_lock);
++ iounmap(ssc->regs);
++ clk_put(ssc->clk);
++ list_del(&ssc->list);
++ kfree(ssc);
++ spin_unlock(&user_lock);
++
++ return 0;
++}
++
++static struct platform_driver ssc_driver = {
++ .remove = __devexit_p(ssc_remove),
++ .driver = {
++ .name = "ssc",
++ },
++};
++
++static int __init ssc_init(void)
++{
++ return platform_driver_probe(&ssc_driver, ssc_probe);
++}
++module_init(ssc_init);
++
++static void __exit ssc_exit(void)
++{
++ platform_driver_unregister(&ssc_driver);
++}
++module_exit(ssc_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("SSC driver for Atmel AVR32 and AT91");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
+index e23082f..1de1716 100644
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -74,6 +74,16 @@ config MMC_AT91
+
+ If unsure, say N.
+
++config MMC_ATMELMCI
++ tristate "Atmel Multimedia Card Interface support"
++ depends on AVR32 && MMC
++ help
++ This selects the Atmel Multimedia Card Interface. If you have
++ a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
++ slot, say Y or M here.
++
++ If unsure, say N.
++
+ config MMC_IMX
+ tristate "Motorola i.MX Multimedia Card Interface support"
+ depends on ARCH_IMX
+diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
+index 6685f64..4b8e6e2 100644
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -14,5 +14,6 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o
+ obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP) += omap.o
+ obj-$(CONFIG_MMC_AT91) += at91_mci.o
++obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
+ obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
+
+diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
+new file mode 100644
+index 0000000..6792ad9
+--- /dev/null
++++ b/drivers/mmc/host/atmel-mci.c
+@@ -0,0 +1,1176 @@
++/*
++ * Atmel MultiMedia Card Interface driver
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/blkdev.h>
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/ioport.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <linux/mmc/host.h>
++
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++#include "atmel-mci.h"
++
++#define DRIVER_NAME "atmel_mci"
++
++#define MCI_DATA_ERROR_FLAGS (MCI_BIT(DCRCE) | MCI_BIT(DTOE) | \
++ MCI_BIT(OVRE) | MCI_BIT(UNRE))
++
++enum {
++ EVENT_CMD_COMPLETE = 0,
++ EVENT_DATA_COMPLETE,
++ EVENT_DATA_ERROR,
++ EVENT_STOP_SENT,
++ EVENT_STOP_COMPLETE,
++ EVENT_DMA_COMPLETE,
++ EVENT_DMA_ERROR,
++ EVENT_CARD_DETECT,
++};
++
++struct atmel_mci_dma {
++ struct dma_request_sg req;
++ unsigned short rx_periph_id;
++ unsigned short tx_periph_id;
++};
++
++struct atmel_mci {
++ struct mmc_host *mmc;
++ void __iomem *regs;
++ struct atmel_mci_dma dma;
++
++ struct mmc_request *mrq;
++ struct mmc_command *cmd;
++ struct mmc_data *data;
++
++ u32 cmd_status;
++ u32 data_status;
++ u32 stop_status;
++ u32 stop_cmdr;
++
++ struct tasklet_struct tasklet;
++ unsigned long pending_events;
++ unsigned long completed_events;
++
++ int present;
++ int detect_pin;
++ int wp_pin;
++
++ unsigned long bus_hz;
++ unsigned long mapbase;
++ struct clk *mck;
++ struct platform_device *pdev;
++
++#ifdef CONFIG_DEBUG_FS
++ struct dentry *debugfs_root;
++ struct dentry *debugfs_regs;
++ struct dentry *debugfs_req;
++ struct dentry *debugfs_pending_events;
++ struct dentry *debugfs_completed_events;
++#endif
++};
++
++/* Those printks take an awful lot of time... */
++#ifndef DEBUG
++static unsigned int fmax = 15000000U;
++#else
++static unsigned int fmax = 1000000U;
++#endif
++module_param(fmax, uint, 0444);
++MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
++
++/* Test bit macros for completed events */
++#define mci_cmd_is_complete(host) \
++ test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_data_is_complete(host) \
++ test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_data_error_is_complete(host) \
++ test_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_stop_sent_is_complete(host) \
++ test_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_stop_is_complete(host) \
++ test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_dma_is_complete(host) \
++ test_bit(EVENT_DMA_COMPLETE, &host->completed_events)
++#define mci_dma_error_is_complete(host) \
++ test_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_card_detect_is_complete(host) \
++ test_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Test and clear bit macros for pending events */
++#define mci_clear_cmd_is_pending(host) \
++ test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_clear_data_is_pending(host) \
++ test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_clear_data_error_is_pending(host) \
++ test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_clear_stop_sent_is_pending(host) \
++ test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_clear_stop_is_pending(host) \
++ test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_clear_dma_error_is_pending(host) \
++ test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_clear_card_detect_is_pending(host) \
++ test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++/* Test and set bit macros for completed events */
++#define mci_set_cmd_is_completed(host) \
++ test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_set_data_is_completed(host) \
++ test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_set_data_error_is_completed(host) \
++ test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_set_stop_sent_is_completed(host) \
++ test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_set_stop_is_completed(host) \
++ test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_dma_error_is_completed(host) \
++ test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_set_card_detect_is_completed(host) \
++ test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Set bit macros for completed events */
++#define mci_set_cmd_complete(host) \
++ set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_set_data_complete(host) \
++ set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_set_data_error_complete(host) \
++ set_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_set_stop_sent_complete(host) \
++ set_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_set_stop_complete(host) \
++ set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_dma_complete(host) \
++ set_bit(EVENT_DMA_COMPLETE, &host->completed_events)
++#define mci_set_dma_error_complete(host) \
++ set_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_set_card_detect_complete(host) \
++ set_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Set bit macros for pending events */
++#define mci_set_cmd_pending(host) \
++ set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_set_data_pending(host) \
++ set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_set_data_error_pending(host) \
++ set_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_set_stop_sent_pending(host) \
++ set_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_set_stop_pending(host) \
++ set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_set_dma_error_pending(host) \
++ set_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_set_card_detect_pending(host) \
++ set_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++/* Clear bit macros for pending events */
++#define mci_clear_cmd_pending(host) \
++ clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_clear_data_pending(host) \
++ clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_clear_data_error_pending(host) \
++ clear_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_clear_stop_sent_pending(host) \
++ clear_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_clear_stop_pending(host) \
++ clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_clear_dma_error_pending(host) \
++ clear_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_clear_card_detect_pending(host) \
++ clear_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++
++#ifdef CONFIG_DEBUG_FS
++#include <linux/debugfs.h>
++
++#define DBG_REQ_BUF_SIZE (4096 - sizeof(unsigned int))
++
++struct req_dbg_data {
++ unsigned int nbytes;
++ char str[DBG_REQ_BUF_SIZE];
++};
++
++static int req_dbg_open(struct inode *inode, struct file *file)
++{
++ struct atmel_mci *host;
++ struct mmc_request *mrq;
++ struct mmc_command *cmd, *stop;
++ struct mmc_data *data;
++ struct req_dbg_data *priv;
++ char *str;
++ unsigned long n = 0;
++
++ priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
++ if (!priv)
++ return -ENOMEM;
++ str = priv->str;
++
++ mutex_lock(&inode->i_mutex);
++ host = inode->i_private;
++
++ spin_lock_irq(&host->mmc->lock);
++ mrq = host->mrq;
++ if (mrq) {
++ cmd = mrq->cmd;
++ data = mrq->data;
++ stop = mrq->stop;
++ n = snprintf(str, DBG_REQ_BUF_SIZE,
++ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
++ cmd->opcode, cmd->arg, cmd->flags,
++ cmd->resp[0], cmd->resp[1], cmd->resp[2],
++ cmd->resp[3], cmd->error);
++ if (n < DBG_REQ_BUF_SIZE && data)
++ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
++ "DATA %u * %u (%u) %x (err %u)\n",
++ data->blocks, data->blksz,
++ data->bytes_xfered, data->flags,
++ data->error);
++ if (n < DBG_REQ_BUF_SIZE && stop)
++ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
++ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
++ stop->opcode, stop->arg, stop->flags,
++ stop->resp[0], stop->resp[1],
++ stop->resp[2], stop->resp[3],
++ stop->error);
++ }
++ spin_unlock_irq(&host->mmc->lock);
++ mutex_unlock(&inode->i_mutex);
++
++ priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
++ file->private_data = priv;
++
++ return 0;
++}
++
++static ssize_t req_dbg_read(struct file *file, char __user *buf,
++ size_t nbytes, loff_t *ppos)
++{
++ struct req_dbg_data *priv = file->private_data;
++
++ return simple_read_from_buffer(buf, nbytes, ppos,
++ priv->str, priv->nbytes);
++}
++
++static int req_dbg_release(struct inode *inode, struct file *file)
++{
++ kfree(file->private_data);
++ return 0;
++}
++
++static const struct file_operations req_dbg_fops = {
++ .owner = THIS_MODULE,
++ .open = req_dbg_open,
++ .llseek = no_llseek,
++ .read = req_dbg_read,
++ .release = req_dbg_release,
++};
++
++static int regs_dbg_open(struct inode *inode, struct file *file)
++{
++ struct atmel_mci *host;
++ unsigned int i;
++ u32 *data;
++ int ret = -ENOMEM;
++
++ mutex_lock(&inode->i_mutex);
++ host = inode->i_private;
++ data = kmalloc(inode->i_size, GFP_KERNEL);
++ if (!data)
++ goto out;
++
++ spin_lock_irq(&host->mmc->lock);
++ for (i = 0; i < inode->i_size / 4; i++)
++ data[i] = __raw_readl(host->regs + i * 4);
++ spin_unlock_irq(&host->mmc->lock);
++
++ file->private_data = data;
++ ret = 0;
++
++out:
++ mutex_unlock(&inode->i_mutex);
++
++ return ret;
++}
++
++static ssize_t regs_dbg_read(struct file *file, char __user *buf,
++ size_t nbytes, loff_t *ppos)
++{
++ struct inode *inode = file->f_dentry->d_inode;
++ int ret;
++
++ mutex_lock(&inode->i_mutex);
++ ret = simple_read_from_buffer(buf, nbytes, ppos,
++ file->private_data,
++ file->f_dentry->d_inode->i_size);
++ mutex_unlock(&inode->i_mutex);
++
++ return ret;
++}
++
++static int regs_dbg_release(struct inode *inode, struct file *file)
++{
++ kfree(file->private_data);
++ return 0;
++}
++
++static const struct file_operations regs_dbg_fops = {
++ .owner = THIS_MODULE,
++ .open = regs_dbg_open,
++ .llseek = generic_file_llseek,
++ .read = regs_dbg_read,
++ .release = regs_dbg_release,
++};
++
++static void atmci_init_debugfs(struct atmel_mci *host)
++{
++ struct mmc_host *mmc;
++ struct dentry *root, *regs;
++ struct resource *res;
++
++ mmc = host->mmc;
++ root = debugfs_create_dir(mmc_hostname(mmc), NULL);
++ if (IS_ERR(root) || !root)
++ goto err_root;
++ host->debugfs_root = root;
++
++ regs = debugfs_create_file("regs", 0400, root, host, &regs_dbg_fops);
++ if (!regs)
++ goto err_regs;
++
++ res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
++ regs->d_inode->i_size = res->end - res->start + 1;
++ host->debugfs_regs = regs;
++
++ host->debugfs_req = debugfs_create_file("req", 0400, root,
++ host, &req_dbg_fops);
++ if (!host->debugfs_req)
++ goto err_req;
++
++ host->debugfs_pending_events
++ = debugfs_create_u32("pending_events", 0400, root,
++ (u32 *)&host->pending_events);
++ if (!host->debugfs_pending_events)
++ goto err_pending_events;
++
++ host->debugfs_completed_events
++ = debugfs_create_u32("completed_events", 0400, root,
++ (u32 *)&host->completed_events);
++ if (!host->debugfs_completed_events)
++ goto err_completed_events;
++
++ return;
++
++err_completed_events:
++ debugfs_remove(host->debugfs_pending_events);
++err_pending_events:
++ debugfs_remove(host->debugfs_req);
++err_req:
++ debugfs_remove(host->debugfs_regs);
++err_regs:
++ debugfs_remove(host->debugfs_root);
++err_root:
++ host->debugfs_root = NULL;
++ dev_err(&host->pdev->dev,
++ "failed to initialize debugfs for %s\n",
++ mmc_hostname(mmc));
++}
++
++static void atmci_cleanup_debugfs(struct atmel_mci *host)
++{
++ if (host->debugfs_root) {
++ debugfs_remove(host->debugfs_completed_events);
++ debugfs_remove(host->debugfs_pending_events);
++ debugfs_remove(host->debugfs_req);
++ debugfs_remove(host->debugfs_regs);
++ debugfs_remove(host->debugfs_root);
++ host->debugfs_root = NULL;
++ }
++}
++#else
++static inline void atmci_init_debugfs(struct atmel_mci *host)
++{
++
++}
++
++static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
++{
++
++}
++#endif /* CONFIG_DEBUG_FS */
++
++static inline unsigned int ns_to_clocks(struct atmel_mci *host,
++ unsigned int ns)
++{
++ return (ns * (host->bus_hz / 1000000) + 999) / 1000;
++}
++
++static void atmci_set_timeout(struct atmel_mci *host,
++ struct mmc_data *data)
++{
++ static unsigned dtomul_to_shift[] = {
++ 0, 4, 7, 8, 10, 12, 16, 20
++ };
++ unsigned timeout;
++ unsigned dtocyc, dtomul;
++
++ timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
++
++ for (dtomul = 0; dtomul < 8; dtomul++) {
++ unsigned shift = dtomul_to_shift[dtomul];
++ dtocyc = (timeout + (1 << shift) - 1) >> shift;
++ if (dtocyc < 15)
++ break;
++ }
++
++ if (dtomul >= 8) {
++ dtomul = 7;
++ dtocyc = 15;
++ }
++
++ dev_dbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
++ dtocyc << dtomul_to_shift[dtomul]);
++ mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
++ | MCI_BF(DTOCYC, dtocyc)));
++}
++
++/*
++ * Return mask with command flags to be enabled for this command.
++ */
++static u32 atmci_prepare_command(struct mmc_host *mmc,
++ struct mmc_command *cmd)
++{
++ u32 cmdr;
++
++ cmd->error = MMC_ERR_NONE;
++
++ cmdr = MCI_BF(CMDNB, cmd->opcode);
++
++ if (cmd->flags & MMC_RSP_PRESENT) {
++ if (cmd->flags & MMC_RSP_136)
++ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
++ else
++ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
++ }
++
++ /*
++ * This should really be MAXLAT_5 for CMD2 and ACMD41, but
++ * it's too difficult to determine whether this is an ACMD or
++ * not. Better make it 64.
++ */
++ cmdr |= MCI_BIT(MAXLAT);
++
++ if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
++ cmdr |= MCI_BIT(OPDCMD);
++
++ dev_dbg(&mmc->class_dev,
++ "cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
++ cmd->opcode, cmd->arg, cmd->flags, (unsigned long)cmdr);
++
++ return cmdr;
++}
++
++static void atmci_start_command(struct atmel_mci *host,
++ struct mmc_command *cmd,
++ u32 cmd_flags)
++{
++ WARN_ON(host->cmd);
++ host->cmd = cmd;
++
++ mci_writel(host, ARGR, cmd->arg);
++ mci_writel(host, CMDR, cmd_flags);
++
++ if (cmd->data)
++ dma_start_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++}
++
++/*
++ * Returns a mask of flags to be set in the command register when the
++ * command to start the transfer is to be sent.
++ */
++static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++ u32 cmd_flags;
++
++ WARN_ON(host->data);
++ host->data = data;
++
++ atmci_set_timeout(host, data);
++ mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
++ | MCI_BF(BLKLEN, data->blksz)));
++ host->dma.req.block_size = data->blksz;
++ host->dma.req.nr_blocks = data->blocks;
++
++ cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
++ if (data->flags & MMC_DATA_STREAM)
++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
++ else if (data->blocks > 1)
++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
++ else
++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
++
++ if (data->flags & MMC_DATA_READ) {
++ cmd_flags |= MCI_BIT(TRDIR);
++ host->dma.req.nr_sg
++ = dma_map_sg(&host->pdev->dev, data->sg,
++ data->sg_len, DMA_FROM_DEVICE);
++ host->dma.req.periph_id = host->dma.rx_periph_id;
++ host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
++ host->dma.req.data_reg = host->mapbase + MCI_RDR;
++ } else {
++ host->dma.req.nr_sg
++ = dma_map_sg(&host->pdev->dev, data->sg,
++ data->sg_len, DMA_TO_DEVICE);
++ host->dma.req.periph_id = host->dma.tx_periph_id;
++ host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
++ host->dma.req.data_reg = host->mapbase + MCI_TDR;
++ }
++ host->dma.req.sg = data->sg;
++
++ dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
++
++ return cmd_flags;
++}
++
++static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++ struct mmc_data *data = mrq->data;
++ u32 iflags;
++ u32 cmdflags = 0;
++
++ iflags = mci_readl(host, IMR);
++ if (iflags)
++ dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
++ mci_readl(host, IMR));
++
++ WARN_ON(host->mrq != NULL);
++ host->mrq = mrq;
++ host->pending_events = 0;
++ host->completed_events = 0;
++
++ iflags = MCI_BIT(CMDRDY);
++ cmdflags = atmci_prepare_command(mmc, mrq->cmd);
++
++ if (mrq->stop) {
++ WARN_ON(!data);
++
++ host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
++ host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
++ if (!(data->flags & MMC_DATA_WRITE))
++ host->stop_cmdr |= MCI_BIT(TRDIR);
++ if (data->flags & MMC_DATA_STREAM)
++ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
++ else
++ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
++ }
++ if (data) {
++ cmdflags |= atmci_prepare_data(mmc, data);
++ iflags |= MCI_DATA_ERROR_FLAGS;
++ }
++
++ atmci_start_command(host, mrq->cmd, cmdflags);
++ mci_writel(host, IER, iflags);
++}
++
++static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++ u32 mr;
++
++ if (ios->clock) {
++ u32 clkdiv;
++
++ /* Set clock rate */
++ clkdiv = host->bus_hz / (2 * ios->clock) - 1;
++ if (clkdiv > 255) {
++ dev_warn(&mmc->class_dev,
++ "clock %u too slow; using %lu\n",
++ ios->clock, host->bus_hz / (2 * 256));
++ clkdiv = 255;
++ }
++
++ mr = mci_readl(host, MR);
++ mr = MCI_BFINS(CLKDIV, clkdiv, mr)
++ | MCI_BIT(WRPROOF) | MCI_BIT(RDPROOF);
++ mci_writel(host, MR, mr);
++
++ /* Enable the MCI controller */
++ mci_writel(host, CR, MCI_BIT(MCIEN));
++ } else {
++ /* Disable the MCI controller */
++ mci_writel(host, CR, MCI_BIT(MCIDIS));
++ }
++
++ switch (ios->bus_width) {
++ case MMC_BUS_WIDTH_1:
++ mci_writel(host, SDCR, 0);
++ break;
++ case MMC_BUS_WIDTH_4:
++ mci_writel(host, SDCR, MCI_BIT(SDCBUS));
++ break;
++ }
++
++ switch (ios->power_mode) {
++ case MMC_POWER_ON:
++ /* Send init sequence (74 clock cycles) */
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CMDR, MCI_BF(SPCMD, MCI_SPCMD_INIT_CMD));
++ while (!(mci_readl(host, SR) & MCI_BIT(CMDRDY)))
++ cpu_relax();
++ break;
++ default:
++ /*
++ * TODO: None of the currently available AVR32-based
++ * boards allow MMC power to be turned off. Implement
++ * power control when this can be tested properly.
++ */
++ break;
++ }
++}
++
++static int atmci_get_ro(struct mmc_host *mmc)
++{
++ int read_only = 0;
++ struct atmel_mci *host = mmc_priv(mmc);
++
++ if (host->wp_pin >= 0) {
++ read_only = gpio_get_value(host->wp_pin);
++ dev_dbg(&mmc->class_dev, "card is %s\n",
++ read_only ? "read-only" : "read-write");
++ } else {
++ dev_dbg(&mmc->class_dev,
++ "no pin for checking read-only switch."
++ " Assuming write-enable.\n");
++ }
++
++ return read_only;
++}
++
++static struct mmc_host_ops atmci_ops = {
++ .request = atmci_request,
++ .set_ios = atmci_set_ios,
++ .get_ro = atmci_get_ro,
++};
++
++static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++
++ WARN_ON(host->cmd || host->data);
++ host->mrq = NULL;
++
++ mmc_request_done(mmc, mrq);
++}
++
++static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
++ u32 flags)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++
++ atmci_start_command(host, data->stop, host->stop_cmdr | flags);
++ mci_writel(host, IER, MCI_BIT(CMDRDY));
++}
++
++static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
++{
++ host->data = NULL;
++ dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
++ ((data->flags & MMC_DATA_WRITE)
++ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
++
++ /*
++ * Data might complete before command for very short transfers
++ * (like READ_SCR)
++ */
++ if (mci_cmd_is_complete(host)
++ && (!data->stop || mci_stop_is_complete(host)))
++ atmci_request_end(host->mmc, data->mrq);
++}
++
++static void atmci_command_complete(struct atmel_mci *host,
++ struct mmc_command *cmd, u32 status)
++{
++ if (status & MCI_BIT(RTOE))
++ cmd->error = MMC_ERR_TIMEOUT;
++ else if ((cmd->flags & MMC_RSP_CRC)
++ && (status & MCI_BIT(RCRCE)))
++ cmd->error = MMC_ERR_BADCRC;
++ else if (status & (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | MCI_BIT(RENDE)))
++ cmd->error = MMC_ERR_FAILED;
++
++ if (cmd->error != MMC_ERR_NONE) {
++ dev_dbg(&host->mmc->class_dev,
++ "command error: op=0x%x status=0x%08x\n",
++ cmd->opcode, status);
++
++ if (cmd->data) {
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++ mci_writel(host, IDR, MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS);
++ host->data = NULL;
++ }
++ }
++}
++
++static void atmci_tasklet_func(unsigned long priv)
++{
++ struct mmc_host *mmc = (struct mmc_host *)priv;
++ struct atmel_mci *host = mmc_priv(mmc);
++ struct mmc_request *mrq = host->mrq;
++ struct mmc_data *data = host->data;
++
++ dev_vdbg(&mmc->class_dev,
++ "tasklet: pending/completed/mask %lx/%lx/%x\n",
++ host->pending_events, host->completed_events,
++ mci_readl(host, IMR));
++
++ if (mci_clear_cmd_is_pending(host)) {
++ mci_set_cmd_complete(host);
++ atmci_command_complete(host, mrq->cmd, host->cmd_status);
++ if (!host->data || mci_data_is_complete(host)
++ || mci_data_error_is_complete(host))
++ atmci_request_end(mmc, mrq);
++ }
++ if (mci_clear_stop_is_pending(host)) {
++ mci_set_stop_complete(host);
++ atmci_command_complete(host, mrq->stop, host->stop_status);
++ if (mci_data_is_complete(host)
++ || mci_data_error_is_complete(host))
++ atmci_request_end(mmc, mrq);
++ }
++ if (mci_clear_dma_error_is_pending(host)) {
++ mci_set_dma_error_complete(host);
++ mci_clear_data_pending(host);
++
++ /* DMA controller got bus error => invalid address */
++ data->error = MMC_ERR_INVALID;
++
++ dev_dbg(&mmc->class_dev, "dma error after %u bytes xfered\n",
++ host->data->bytes_xfered);
++
++ if (data->stop
++ && !mci_set_stop_sent_is_completed(host))
++ /* TODO: Check if card is still present */
++ send_stop_cmd(host->mmc, data, 0);
++
++ atmci_data_complete(host, data);
++ }
++ if (mci_clear_data_error_is_pending(host)) {
++ u32 status = host->data_status;
++
++ mci_set_data_error_complete(host);
++ mci_clear_data_pending(host);
++
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++
++ if (status & MCI_BIT(DCRCE)) {
++ dev_dbg(&mmc->class_dev, "data CRC error\n");
++ data->error = MMC_ERR_BADCRC;
++ } else if (status & MCI_BIT(DTOE)) {
++ dev_dbg(&mmc->class_dev, "data timeout error\n");
++ data->error = MMC_ERR_TIMEOUT;
++ } else {
++ dev_dbg(&mmc->class_dev, "data FIFO error\n");
++ data->error = MMC_ERR_FIFO;
++ }
++ dev_dbg(&mmc->class_dev, "bytes xfered: %u\n",
++ data->bytes_xfered);
++
++ if (data->stop
++ && !mci_set_stop_sent_is_completed(host))
++ /* TODO: Check if card is still present */
++ send_stop_cmd(host->mmc, data, 0);
++
++ atmci_data_complete(host, data);
++ }
++ if (mci_clear_data_is_pending(host)) {
++ mci_set_data_complete(host);
++ data->bytes_xfered = data->blocks * data->blksz;
++ atmci_data_complete(host, data);
++ }
++ if (mci_clear_card_detect_is_pending(host)) {
++ /* Reset controller if card is gone */
++ if (!host->present) {
++ mci_writel(host, CR, MCI_BIT(SWRST));
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CR, MCI_BIT(MCIEN));
++ }
++
++ /* Clean up queue if present */
++ if (mrq) {
++ if (!mci_cmd_is_complete(host))
++ mrq->cmd->error = MMC_ERR_TIMEOUT;
++ if (mrq->data && !mci_data_is_complete(host)
++ && !mci_data_error_is_complete(host)) {
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++ host->data->error = MMC_ERR_TIMEOUT;
++ atmci_data_complete(host, data);
++ }
++ if (mrq->stop && !mci_stop_is_complete(host))
++ mrq->stop->error = MMC_ERR_TIMEOUT;
++
++ host->cmd = NULL;
++ atmci_request_end(mmc, mrq);
++ }
++ mmc_detect_change(host->mmc, msecs_to_jiffies(100));
++ }
++}
++
++static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++ struct mmc_command *cmd = host->cmd;
++
++ /*
++ * Read the response now so that we're free to send a new
++ * command immediately.
++ */
++ cmd->resp[0] = mci_readl(host, RSPR);
++ cmd->resp[1] = mci_readl(host, RSPR);
++ cmd->resp[2] = mci_readl(host, RSPR);
++ cmd->resp[3] = mci_readl(host, RSPR);
++
++ mci_writel(host, IDR, MCI_BIT(CMDRDY));
++ host->cmd = NULL;
++
++ if (mci_stop_sent_is_complete(host)) {
++ host->stop_status = status;
++ mci_set_stop_pending(host);
++ } else {
++ if (host->mrq->stop && mci_dma_is_complete(host)
++ && !mci_set_stop_sent_is_completed(host))
++ send_stop_cmd(host->mmc, host->data, 0);
++ host->cmd_status = status;
++ mci_set_cmd_pending(host);
++ }
++
++ tasklet_schedule(&host->tasklet);
++}
++
++static void atmci_xfer_complete(struct dma_request *_req)
++{
++ struct dma_request_sg *req = to_dma_request_sg(_req);
++ struct atmel_mci_dma *dma;
++ struct atmel_mci *host;
++ struct mmc_data *data;
++
++ dma = container_of(req, struct atmel_mci_dma, req);
++ host = container_of(dma, struct atmel_mci, dma);
++ data = host->data;
++
++ /*
++ * This callback may be called before we see the CMDRDY
++ * interrupt under heavy irq load (possibly caused by other
++ * drivers) or when interrupts are disabled for a long time.
++ */
++ mci_set_dma_complete(host);
++ if (data->stop && mci_cmd_is_complete(host)
++ && !mci_set_stop_sent_is_completed(host))
++ send_stop_cmd(host->mmc, data, 0);
++
++ /*
++ * Regardless of what the documentation says, we have to wait
++ * for NOTBUSY even after block read operations.
++ *
++ * When the DMA transfer is complete, the controller may still
++ * be reading the CRC from the card, i.e. the data transfer is
++ * still in progress and we haven't seen all the potential
++ * error bits yet.
++ */
++ mci_writel(host, IER, MCI_BIT(NOTBUSY));
++}
++
++static void atmci_dma_error(struct dma_request *_req)
++{
++ struct dma_request_sg *req = to_dma_request_sg(_req);
++ struct atmel_mci_dma *dma;
++ struct atmel_mci *host;
++
++ dma = container_of(req, struct atmel_mci_dma, req);
++ host = container_of(dma, struct atmel_mci, dma);
++
++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS));
++
++ mci_set_dma_error_pending(host);
++ tasklet_schedule(&host->tasklet);
++}
++
++static irqreturn_t atmci_interrupt(int irq, void *dev_id)
++{
++ struct mmc_host *mmc = dev_id;
++ struct atmel_mci *host = mmc_priv(mmc);
++ u32 status, mask, pending;
++
++ spin_lock(&mmc->lock);
++
++ status = mci_readl(host, SR);
++ mask = mci_readl(host, IMR);
++ pending = status & mask;
++
++ do {
++ if (pending & MCI_DATA_ERROR_FLAGS) {
++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS));
++ host->data_status = status;
++ mci_set_data_error_pending(host);
++ tasklet_schedule(&host->tasklet);
++ break;
++ }
++ if (pending & MCI_BIT(CMDRDY))
++ atmci_cmd_interrupt(mmc, status);
++ if (pending & MCI_BIT(NOTBUSY)) {
++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS));
++ mci_set_data_pending(host);
++ tasklet_schedule(&host->tasklet);
++ }
++
++ status = mci_readl(host, SR);
++ mask = mci_readl(host, IMR);
++ pending = status & mask;
++ } while (pending);
++
++ spin_unlock(&mmc->lock);
++
++ return IRQ_HANDLED;
++}
++
++static irqreturn_t atmci_detect_change(int irq, void *dev_id)
++{
++ struct mmc_host *mmc = dev_id;
++ struct atmel_mci *host = mmc_priv(mmc);
++
++ int present = !gpio_get_value(irq_to_gpio(irq));
++
++ if (present != host->present) {
++ dev_dbg(&mmc->class_dev, "card %s\n",
++ present ? "inserted" : "removed");
++ host->present = present;
++ mci_set_card_detect_pending(host);
++ tasklet_schedule(&host->tasklet);
++ }
++ return IRQ_HANDLED;
++}
++
++static int __devinit atmci_probe(struct platform_device *pdev)
++{
++ struct mci_platform_data *board;
++ struct atmel_mci *host;
++ struct mmc_host *mmc;
++ struct resource *regs;
++ int irq;
++ int ret;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ board = pdev->dev.platform_data;
++
++ mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
++ if (!mmc)
++ return -ENOMEM;
++
++ host = mmc_priv(mmc);
++ host->pdev = pdev;
++ host->mmc = mmc;
++ if (board) {
++ host->detect_pin = board->detect_pin;
++ host->wp_pin = board->wp_pin;
++ } else {
++ host->detect_pin = -1;
++ host->detect_pin = -1;
++ }
++
++ host->mck = clk_get(&pdev->dev, "mci_clk");
++ if (IS_ERR(host->mck)) {
++ ret = PTR_ERR(host->mck);
++ goto out_free_host;
++ }
++ clk_enable(host->mck);
++
++ ret = -ENOMEM;
++ host->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!host->regs)
++ goto out_disable_clk;
++
++ host->bus_hz = clk_get_rate(host->mck);
++ host->mapbase = regs->start;
++
++ mmc->ops = &atmci_ops;
++ mmc->f_min = (host->bus_hz + 511) / 512;
++ mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
++ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
++ mmc->caps |= MMC_CAP_4_BIT_DATA;
++
++ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
++
++ ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
++ if (ret)
++ goto out_unmap;
++
++ /* Assume card is present if we don't have a detect pin */
++ host->present = 1;
++ if (host->detect_pin >= 0) {
++ if (gpio_request(host->detect_pin, "mmc_detect")) {
++ dev_dbg(&mmc->class_dev, "no detect pin available\n");
++ host->detect_pin = -1;
++ } else {
++ host->present = !gpio_get_value(host->detect_pin);
++ }
++ }
++ if (host->wp_pin >= 0) {
++ if (gpio_request(host->wp_pin, "mmc_wp")) {
++ dev_dbg(&mmc->class_dev, "no WP pin available\n");
++ host->wp_pin = -1;
++ }
++ }
++
++ /* TODO: Get this information from platform data */
++ ret = -ENOMEM;
++ host->dma.req.req.dmac = find_dma_controller(0);
++ if (!host->dma.req.req.dmac) {
++ dev_dbg(&mmc->class_dev, "no DMA controller available\n");
++ goto out_free_irq;
++ }
++ ret = dma_alloc_channel(host->dma.req.req.dmac);
++ if (ret < 0) {
++ dev_dbg(&mmc->class_dev, "unable to allocate DMA channel\n");
++ goto out_free_irq;
++ }
++ host->dma.req.req.channel = ret;
++ host->dma.req.width = DMA_WIDTH_32BIT;
++ host->dma.req.req.xfer_complete = atmci_xfer_complete;
++ host->dma.req.req.block_complete = NULL; // atmci_block_complete;
++ host->dma.req.req.error = atmci_dma_error;
++ host->dma.rx_periph_id = 0;
++ host->dma.tx_periph_id = 1;
++
++ mci_writel(host, CR, MCI_BIT(SWRST));
++ mci_writel(host, IDR, ~0UL);
++
++ platform_set_drvdata(pdev, host);
++
++ mmc_add_host(mmc);
++
++ if (host->detect_pin >= 0) {
++ ret = request_irq(gpio_to_irq(host->detect_pin),
++ atmci_detect_change,
++ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
++ DRIVER_NAME, mmc);
++ if (ret) {
++ dev_dbg(&mmc->class_dev,
++ "could not request IRQ %d for detect pin\n",
++ gpio_to_irq(host->detect_pin));
++ gpio_free(host->detect_pin);
++ host->detect_pin = -1;
++ }
++ }
++
++ dev_info(&mmc->class_dev, "Atmel MCI controller at 0x%08lx irq %d\n",
++ host->mapbase, irq);
++
++ atmci_init_debugfs(host);
++
++ return 0;
++
++out_free_irq:
++ if (host->detect_pin >= 0)
++ gpio_free(host->detect_pin);
++ if (host->wp_pin >= 0)
++ gpio_free(host->wp_pin);
++ free_irq(irq, mmc);
++out_unmap:
++ iounmap(host->regs);
++out_disable_clk:
++ clk_disable(host->mck);
++ clk_put(host->mck);
++out_free_host:
++ mmc_free_host(mmc);
++ return ret;
++}
++
++static int __devexit atmci_remove(struct platform_device *pdev)
++{
++ struct atmel_mci *host = platform_get_drvdata(pdev);
++
++ platform_set_drvdata(pdev, NULL);
++
++ if (host) {
++ atmci_cleanup_debugfs(host);
++
++ if (host->detect_pin >= 0) {
++ free_irq(gpio_to_irq(host->detect_pin), host->mmc);
++ cancel_delayed_work(&host->mmc->detect);
++ gpio_free(host->detect_pin);
++ }
++
++ mmc_remove_host(host->mmc);
++
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CR, MCI_BIT(MCIDIS));
++ mci_readl(host, SR);
++
++ dma_release_channel(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++
++ if (host->wp_pin >= 0)
++ gpio_free(host->wp_pin);
++
++ free_irq(platform_get_irq(pdev, 0), host->mmc);
++ iounmap(host->regs);
++
++ clk_disable(host->mck);
++ clk_put(host->mck);
++
++ mmc_free_host(host->mmc);
++ }
++ return 0;
++}
++
++static struct platform_driver atmci_driver = {
++ .probe = atmci_probe,
++ .remove = __devexit_p(atmci_remove),
++ .driver = {
++ .name = DRIVER_NAME,
++ },
++};
++
++static int __init atmci_init(void)
++{
++ return platform_driver_register(&atmci_driver);
++}
++
++static void __exit atmci_exit(void)
++{
++ platform_driver_unregister(&atmci_driver);
++}
++
++module_init(atmci_init);
++module_exit(atmci_exit);
++
++MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/mmc/host/atmel-mci.h b/drivers/mmc/host/atmel-mci.h
+new file mode 100644
+index 0000000..60d15c4
+--- /dev/null
++++ b/drivers/mmc/host/atmel-mci.h
+@@ -0,0 +1,192 @@
++/*
++ * Atmel MultiMedia Card Interface driver
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
++#define __DRIVERS_MMC_ATMEL_MCI_H__
++
++/* MCI register offsets */
++#define MCI_CR 0x0000
++#define MCI_MR 0x0004
++#define MCI_DTOR 0x0008
++#define MCI_SDCR 0x000c
++#define MCI_ARGR 0x0010
++#define MCI_CMDR 0x0014
++#define MCI_BLKR 0x0018
++#define MCI_RSPR 0x0020
++#define MCI_RSPR1 0x0024
++#define MCI_RSPR2 0x0028
++#define MCI_RSPR3 0x002c
++#define MCI_RDR 0x0030
++#define MCI_TDR 0x0034
++#define MCI_SR 0x0040
++#define MCI_IER 0x0044
++#define MCI_IDR 0x0048
++#define MCI_IMR 0x004c
++
++/* Bitfields in CR */
++#define MCI_MCIEN_OFFSET 0
++#define MCI_MCIEN_SIZE 1
++#define MCI_MCIDIS_OFFSET 1
++#define MCI_MCIDIS_SIZE 1
++#define MCI_PWSEN_OFFSET 2
++#define MCI_PWSEN_SIZE 1
++#define MCI_PWSDIS_OFFSET 3
++#define MCI_PWSDIS_SIZE 1
++#define MCI_SWRST_OFFSET 7
++#define MCI_SWRST_SIZE 1
++
++/* Bitfields in MR */
++#define MCI_CLKDIV_OFFSET 0
++#define MCI_CLKDIV_SIZE 8
++#define MCI_PWSDIV_OFFSET 8
++#define MCI_PWSDIV_SIZE 3
++#define MCI_RDPROOF_OFFSET 11
++#define MCI_RDPROOF_SIZE 1
++#define MCI_WRPROOF_OFFSET 12
++#define MCI_WRPROOF_SIZE 1
++#define MCI_DMAPADV_OFFSET 14
++#define MCI_DMAPADV_SIZE 1
++#define MCI_BLKLEN_OFFSET 16
++#define MCI_BLKLEN_SIZE 16
++
++/* Bitfields in DTOR */
++#define MCI_DTOCYC_OFFSET 0
++#define MCI_DTOCYC_SIZE 4
++#define MCI_DTOMUL_OFFSET 4
++#define MCI_DTOMUL_SIZE 3
++
++/* Bitfields in SDCR */
++#define MCI_SDCSEL_OFFSET 0
++#define MCI_SDCSEL_SIZE 4
++#define MCI_SDCBUS_OFFSET 7
++#define MCI_SDCBUS_SIZE 1
++
++/* Bitfields in ARGR */
++#define MCI_ARG_OFFSET 0
++#define MCI_ARG_SIZE 32
++
++/* Bitfields in CMDR */
++#define MCI_CMDNB_OFFSET 0
++#define MCI_CMDNB_SIZE 6
++#define MCI_RSPTYP_OFFSET 6
++#define MCI_RSPTYP_SIZE 2
++#define MCI_SPCMD_OFFSET 8
++#define MCI_SPCMD_SIZE 3
++#define MCI_OPDCMD_OFFSET 11
++#define MCI_OPDCMD_SIZE 1
++#define MCI_MAXLAT_OFFSET 12
++#define MCI_MAXLAT_SIZE 1
++#define MCI_TRCMD_OFFSET 16
++#define MCI_TRCMD_SIZE 2
++#define MCI_TRDIR_OFFSET 18
++#define MCI_TRDIR_SIZE 1
++#define MCI_TRTYP_OFFSET 19
++#define MCI_TRTYP_SIZE 2
++
++/* Bitfields in BLKR */
++#define MCI_BCNT_OFFSET 0
++#define MCI_BCNT_SIZE 16
++
++/* Bitfields in RSPRn */
++#define MCI_RSP_OFFSET 0
++#define MCI_RSP_SIZE 32
++
++/* Bitfields in SR/IER/IDR/IMR */
++#define MCI_CMDRDY_OFFSET 0
++#define MCI_CMDRDY_SIZE 1
++#define MCI_RXRDY_OFFSET 1
++#define MCI_RXRDY_SIZE 1
++#define MCI_TXRDY_OFFSET 2
++#define MCI_TXRDY_SIZE 1
++#define MCI_BLKE_OFFSET 3
++#define MCI_BLKE_SIZE 1
++#define MCI_DTIP_OFFSET 4
++#define MCI_DTIP_SIZE 1
++#define MCI_NOTBUSY_OFFSET 5
++#define MCI_NOTBUSY_SIZE 1
++#define MCI_ENDRX_OFFSET 6
++#define MCI_ENDRX_SIZE 1
++#define MCI_ENDTX_OFFSET 7
++#define MCI_ENDTX_SIZE 1
++#define MCI_RXBUFF_OFFSET 14
++#define MCI_RXBUFF_SIZE 1
++#define MCI_TXBUFE_OFFSET 15
++#define MCI_TXBUFE_SIZE 1
++#define MCI_RINDE_OFFSET 16
++#define MCI_RINDE_SIZE 1
++#define MCI_RDIRE_OFFSET 17
++#define MCI_RDIRE_SIZE 1
++#define MCI_RCRCE_OFFSET 18
++#define MCI_RCRCE_SIZE 1
++#define MCI_RENDE_OFFSET 19
++#define MCI_RENDE_SIZE 1
++#define MCI_RTOE_OFFSET 20
++#define MCI_RTOE_SIZE 1
++#define MCI_DCRCE_OFFSET 21
++#define MCI_DCRCE_SIZE 1
++#define MCI_DTOE_OFFSET 22
++#define MCI_DTOE_SIZE 1
++#define MCI_OVRE_OFFSET 30
++#define MCI_OVRE_SIZE 1
++#define MCI_UNRE_OFFSET 31
++#define MCI_UNRE_SIZE 1
++
++/* Constants for DTOMUL */
++#define MCI_DTOMUL_1_CYCLE 0
++#define MCI_DTOMUL_16_CYCLES 1
++#define MCI_DTOMUL_128_CYCLES 2
++#define MCI_DTOMUL_256_CYCLES 3
++#define MCI_DTOMUL_1024_CYCLES 4
++#define MCI_DTOMUL_4096_CYCLES 5
++#define MCI_DTOMUL_65536_CYCLES 6
++#define MCI_DTOMUL_1048576_CYCLES 7
++
++/* Constants for RSPTYP */
++#define MCI_RSPTYP_NO_RESP 0
++#define MCI_RSPTYP_48_BIT 1
++#define MCI_RSPTYP_136_BIT 2
++
++/* Constants for SPCMD */
++#define MCI_SPCMD_NO_SPEC_CMD 0
++#define MCI_SPCMD_INIT_CMD 1
++#define MCI_SPCMD_SYNC_CMD 2
++#define MCI_SPCMD_INT_CMD 4
++#define MCI_SPCMD_INT_RESP 5
++
++/* Constants for TRCMD */
++#define MCI_TRCMD_NO_TRANS 0
++#define MCI_TRCMD_START_TRANS 1
++#define MCI_TRCMD_STOP_TRANS 2
++
++/* Constants for TRTYP */
++#define MCI_TRTYP_BLOCK 0
++#define MCI_TRTYP_MULTI_BLOCK 1
++#define MCI_TRTYP_STREAM 2
++
++/* Bit manipulation macros */
++#define MCI_BIT(name) \
++ (1 << MCI_##name##_OFFSET)
++#define MCI_BF(name,value) \
++ (((value) & ((1 << MCI_##name##_SIZE) - 1)) \
++ << MCI_##name##_OFFSET)
++#define MCI_BFEXT(name,value) \
++ (((value) >> MCI_##name##_OFFSET) \
++ & ((1 << MCI_##name##_SIZE) - 1))
++#define MCI_BFINS(name,value,old) \
++ (((old) & ~(((1 << MCI_##name##_SIZE) - 1) \
++ << MCI_##name##_OFFSET)) \
++ | MCI_BF(name,value))
++
++/* Register access macros */
++#define mci_readl(port,reg) \
++ __raw_readl((port)->regs + MCI_##reg)
++#define mci_writel(port,reg,value) \
++ __raw_writel((value), (port)->regs + MCI_##reg)
++
++#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
+diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
+index 2f19fa7..94304ca 100644
+--- a/drivers/mtd/chips/cfi_cmdset_0001.c
++++ b/drivers/mtd/chips/cfi_cmdset_0001.c
+@@ -50,6 +50,7 @@
+ #define I82802AC 0x00ac
+ #define MANUFACTURER_ST 0x0020
+ #define M50LPW080 0x002F
++#define AT49BV640D 0x02de
+
+ static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+@@ -156,6 +157,47 @@ static void cfi_tell_features(struct cfi_pri_intelext *extp)
+ }
+ #endif
+
++/* Atmel chips don't use the same PRI format as Intel chips */
++static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
++{
++ struct map_info *map = mtd->priv;
++ struct cfi_private *cfi = map->fldrv_priv;
++ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
++ struct cfi_pri_atmel atmel_pri;
++ uint32_t features = 0;
++
++ /* Reverse byteswapping */
++ extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
++ extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
++ extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
++
++ memcpy(&atmel_pri, extp, sizeof(atmel_pri));
++ memset((char *)extp + 5, 0, sizeof(*extp) - 5);
++
++ printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
++
++ if (atmel_pri.Features & 0x01) /* chip erase supported */
++ features |= (1<<0);
++ if (atmel_pri.Features & 0x02) /* erase suspend supported */
++ features |= (1<<1);
++ if (atmel_pri.Features & 0x04) /* program suspend supported */
++ features |= (1<<2);
++ if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
++ features |= (1<<9);
++ if (atmel_pri.Features & 0x20) /* page mode read supported */
++ features |= (1<<7);
++ if (atmel_pri.Features & 0x40) /* queued erase supported */
++ features |= (1<<4);
++ if (atmel_pri.Features & 0x80) /* Protection bits supported */
++ features |= (1<<6);
++
++ extp->FeatureSupport = features;
++
++ /* burst write mode not supported */
++ cfi->cfiq->BufWriteTimeoutTyp = 0;
++ cfi->cfiq->BufWriteTimeoutMax = 0;
++}
++
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
+ static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
+@@ -233,6 +275,7 @@ static void fixup_use_powerup_lock(struct mtd_info *mtd, void *param)
+ }
+
+ static struct cfi_fixup cfi_fixup_table[] = {
++ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ { CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
+ #endif
+diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
+index 1f64458..205977b 100644
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -185,6 +185,10 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
+ extp->TopBottom = 2;
+ else
+ extp->TopBottom = 3;
++
++ /* burst write mode not supported */
++ cfi->cfiq->BufWriteTimeoutTyp = 0;
++ cfi->cfiq->BufWriteTimeoutMax = 0;
+ }
+
+ static void fixup_use_secsi(struct mtd_info *mtd, void *param)
+@@ -217,6 +221,7 @@ static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param)
+ }
+
+ static struct cfi_fixup cfi_fixup_table[] = {
++ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef AMD_BOOTLOC_BUG
+ { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
+ #endif
+@@ -229,7 +234,6 @@ static struct cfi_fixup cfi_fixup_table[] = {
+ #if !FORCE_WORD_WRITE
+ { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
+ #endif
+- { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ { 0, 0, NULL, NULL }
+ };
+ static struct cfi_fixup jedec_fixup_table[] = {
+diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
+index c0c77f8..7623315 100644
+--- a/drivers/pcmcia/Kconfig
++++ b/drivers/pcmcia/Kconfig
+@@ -271,6 +271,13 @@ config AT91_CF
+ Say Y here to support the CompactFlash controller on AT91 chips.
+ Or choose M to compile the driver as a module named "at91_cf".
+
++config AT32_CF
++ tristate "AT32AP CompactFlash Controller"
++ depends on PCMCIA && AVR32 && PLATFORM_AT32AP
++ help
++ Say Y here to support the CompactFlash controller on AT32 chips.
++ Or choose M to compile the driver as a module named "at32_cf".
++
+ config PCCARD_NONSTATIC
+ tristate
+
+diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
+index 4276965..08d7ffa 100644
+--- a/drivers/pcmcia/Makefile
++++ b/drivers/pcmcia/Makefile
+@@ -37,6 +37,7 @@ obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o
+ obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o
+ obj-$(CONFIG_OMAP_CF) += omap_cf.o
+ obj-$(CONFIG_AT91_CF) += at91_cf.o
++obj-$(CONFIG_AT32_CF) += at32_cf.o
+
+ sa11xx_core-y += soc_common.o sa11xx_base.o
+ pxa2xx_core-y += soc_common.o pxa2xx_base.o
+diff --git a/drivers/pcmcia/at32_cf.c b/drivers/pcmcia/at32_cf.c
+new file mode 100644
+index 0000000..ebe1495
+--- /dev/null
++++ b/drivers/pcmcia/at32_cf.c
+@@ -0,0 +1,531 @@
++/*
++ * Driver for AVR32 Static Memory Controller: CompactFlash support
++ *
++ * Copyright (C) 2006 Atmel Norway
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++ * 02111-1307, USA.
++ *
++ * The full GNU General Public License is included in this
++ * distribution in the file called COPYING.
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++#include <linux/dma-mapping.h>
++
++#include <pcmcia/ss.h>
++
++#include <asm/gpio.h>
++#include <asm/io.h>
++#include <asm/arch/board.h>
++
++#include <asm/arch/smc.h>
++
++struct at32_cf_socket {
++ struct pcmcia_socket socket;
++ int detect_pin;
++ int reset_pin;
++ int vcc_pin;
++ int ready_pin;
++ struct resource res_attr;
++ struct resource res_mem;
++ struct resource res_io;
++ struct smc_config smc;
++ unsigned int irq;
++ unsigned int cf_cs;
++ socket_state_t state;
++ unsigned present:1;
++};
++#define to_at32_cf(sock) container_of(sock, struct at32_cf_socket, socket)
++
++/*
++ * We have the following memory layout relative to the base address:
++ *
++ * Alt IDE Mode: 00e0 0000 -> 00ff ffff
++ * True IDE Mode: 00c0 0000 -> 00df ffff
++ * I/O memory: 0080 0000 -> 00bf ffff
++ * Common memory: 0040 0000 -> 007f ffff
++ * Attribute memory: 0000 0000 -> 003f ffff
++ */
++#define CF_ATTR_OFFSET 0x00000000
++#define CF_MEM_OFFSET 0x00400000
++#define CF_IO_OFFSET 0x00800000
++#define CF_RES_SIZE 4096
++
++#ifdef DEBUG
++
++static int pc_debug;
++module_param(pc_debug, int, 0644);
++
++static void at32_cf_debug(struct at32_cf_socket *cf, const char *func,
++ int level, const char *fmt, ...)
++{
++ va_list args;
++
++ if (pc_debug > level) {
++ printk(KERN_DEBUG "at32_cf/%u: %s: ", cf->cf_cs, func);
++ va_start(args, fmt);
++ vprintk(fmt, args);
++ va_end(args);
++ }
++}
++
++#define debug(cf, lvl, fmt, arg...) \
++ at32_cf_debug(cf, __func__, lvl, fmt, ##arg)
++
++#else
++#define debug(cf, lvl, fmt, arg...) do { } while (0)
++#endif
++
++static inline int at32_cf_present(struct at32_cf_socket *cf)
++{
++ int present = 1;
++
++ /* If we don't have a detect pin, assume the card is present */
++ if (cf->detect_pin >= 0)
++ present = !gpio_get_value(cf->detect_pin);
++
++ return present;
++}
++
++static irqreturn_t at32_cf_irq(int irq, void *dev_id)
++{
++ struct at32_cf_socket *cf = dev_id;
++ unsigned int present;
++
++ present = at32_cf_present(cf);
++ if (present != cf->present) {
++ cf->present = present;
++ debug(cf, 3, "card %s\n", present ? "present" : "gone");
++ pcmcia_parse_events(&cf->socket, SS_DETECT);
++ }
++
++ return IRQ_HANDLED;
++}
++
++static int at32_cf_get_status(struct pcmcia_socket *sock, u_int *value)
++{
++ struct at32_cf_socket *cf;
++ u_int status = 0;
++
++ cf = container_of(sock, struct at32_cf_socket, socket);
++
++ if (at32_cf_present(cf)) {
++ /* NOTE: gpio on AP7xxx is 3.3V */
++ status = SS_DETECT | SS_3VCARD;
++ if (cf->ready_pin < 0 || gpio_get_value(cf->ready_pin))
++ status |= SS_READY;
++ if (cf->vcc_pin < 0 || gpio_get_value(cf->vcc_pin))
++ status |= SS_POWERON;
++ }
++
++ *value = status;
++ return 0;
++}
++
++static int at32_cf_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
++{
++ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
++
++ debug(cf, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n",
++ (state->csc_mask==0)?"<NONE> ":"",
++ (state->csc_mask&SS_DETECT)?"DETECT ":"",
++ (state->csc_mask&SS_READY)?"READY ":"",
++ (state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
++ (state->csc_mask&SS_BATWARN)?"BATWARN ":"",
++ (state->csc_mask&SS_STSCHG)?"STSCHG ":"",
++ (state->flags==0)?"<NONE> ":"",
++ (state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
++ (state->flags&SS_IOCARD)?"IOCARD ":"",
++ (state->flags&SS_RESET)?"RESET ":"",
++ (state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
++ (state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
++ state->Vcc, state->Vpp, state->io_irq);
++
++ /*
++ * TODO: Allow boards to override this in case they have level
++ * converters.
++ */
++ switch (state->Vcc) {
++ case 0:
++ if (cf->vcc_pin >= 0)
++ gpio_set_value(cf->vcc_pin, 0);
++ break;
++ case 33:
++ if (cf->vcc_pin >= 0)
++ gpio_set_value(cf->vcc_pin, 1);
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ if (cf->reset_pin >= 0)
++ gpio_set_value(cf->reset_pin, state->flags & SS_RESET);
++
++ cf->state = *state;
++
++ return 0;
++}
++
++static int at32_cf_socket_init(struct pcmcia_socket *sock)
++{
++ debug(to_at32_cf(sock), 2, "called\n");
++
++ return 0;
++}
++
++static int at32_cf_suspend(struct pcmcia_socket *sock)
++{
++ debug(to_at32_cf(sock), 2, "called\n");
++
++ at32_cf_set_socket(sock, &dead_socket);
++
++ return 0;
++}
++
++static int at32_cf_set_io_map(struct pcmcia_socket *sock,
++ struct pccard_io_map *map)
++{
++ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
++ int retval;
++
++ debug(cf, 2, "map %u speed %u start 0x%08x stop 0x%08x\n",
++ map->map, map->speed, map->start, map->stop);
++ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
++ (map->flags == 0) ? "<NONE>":"",
++ (map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
++ (map->flags & MAP_16BIT) ? "16BIT " : "",
++ (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
++ (map->flags & MAP_0WS) ? "0WS " : "",
++ (map->flags & MAP_WRPROT) ? "WRPROT " : "",
++ (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
++ (map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
++
++ map->flags &= MAP_ACTIVE | MAP_16BIT | MAP_USE_WAIT;
++
++ if (map->flags & MAP_16BIT)
++ cf->smc.bus_width = 2;
++ else
++ cf->smc.bus_width = 1;
++
++ if (map->flags & MAP_USE_WAIT)
++ cf->smc.nwait_mode = 3;
++ else
++ cf->smc.nwait_mode = 0;
++
++ retval = smc_set_configuration(cf->cf_cs, &cf->smc);
++ if (retval) {
++ printk(KERN_ERR "at32_cf: could not set up SMC for I/O\n");
++ return retval;
++ }
++
++ map->start = cf->socket.io_offset;
++ map->stop = map->start + CF_RES_SIZE - 1;
++
++ return 0;
++}
++
++static int
++at32_cf_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
++{
++ struct at32_cf_socket *cf;
++ struct resource *res;
++ int retval;
++
++ cf = container_of(sock, struct at32_cf_socket, socket);
++
++ debug(cf, 2, "map %u speed %u card_start %08x\n",
++ map->map, map->speed, map->card_start);
++ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
++ (map->flags==0)?"<NONE>":"",
++ (map->flags&MAP_ACTIVE)?"ACTIVE ":"",
++ (map->flags&MAP_16BIT)?"16BIT ":"",
++ (map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
++ (map->flags&MAP_0WS)?"0WS ":"",
++ (map->flags&MAP_WRPROT)?"WRPROT ":"",
++ (map->flags&MAP_ATTRIB)?"ATTRIB ":"",
++ (map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
++
++ if (map->card_start)
++ return -EINVAL;
++
++ map->flags &= MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT | MAP_USE_WAIT;
++
++ if (map->flags & MAP_ATTRIB) {
++ res = &cf->res_attr;
++
++ /* Linksys WCF12 seems to use WAIT when reading CIS */
++ map->flags |= MAP_USE_WAIT;
++ } else {
++ res = &cf->res_mem;
++ }
++
++ if (map->flags & MAP_USE_WAIT)
++ cf->smc.nwait_mode = 3;
++ else
++ cf->smc.nwait_mode = 0;
++
++ retval = smc_set_configuration(cf->cf_cs, &cf->smc);
++ if (retval) {
++ printk(KERN_ERR "at32_cf: could not set up SMC for mem\n");
++ return retval;
++ }
++
++ map->static_start = res->start;
++
++ return 0;
++}
++
++static struct pccard_operations at32_cf_ops = {
++ .init = at32_cf_socket_init,
++ .suspend = at32_cf_suspend,
++ .get_status = at32_cf_get_status,
++ .set_socket = at32_cf_set_socket,
++ .set_io_map = at32_cf_set_io_map,
++ .set_mem_map = at32_cf_set_mem_map,
++};
++
++static int __init request_pin(struct platform_device *pdev,
++ unsigned int pin, const char *name)
++{
++ if (gpio_request(pin, name)) {
++ dev_warn(&pdev->dev, "failed to request %s pin\n", name);
++ return -1;
++ }
++
++ return pin;
++}
++
++static struct smc_timing at32_cf_timing __initdata = {
++ .ncs_read_setup = 30,
++ .nrd_setup = 100,
++ .ncs_write_setup = 30,
++ .nwe_setup = 100,
++
++ .ncs_read_pulse = 360,
++ .nrd_pulse = 290,
++ .ncs_write_pulse = 360,
++ .nwe_pulse = 290,
++
++ .read_cycle = 420,
++ .write_cycle = 420,
++};
++
++static int __init at32_cf_probe(struct platform_device *pdev)
++{
++ struct at32_cf_socket *cf;
++ struct cf_platform_data *board = pdev->dev.platform_data;
++ struct resource *res_skt;
++ int irq;
++ int ret;
++
++ dev_dbg(&pdev->dev, "probe");
++
++ if (!board)
++ return -ENXIO;
++
++ res_skt = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res_skt)
++ return -ENXIO;
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ cf = kzalloc(sizeof(struct at32_cf_socket), GFP_KERNEL);
++ if (!cf)
++ return -ENOMEM;
++
++ cf->detect_pin = -1;
++ cf->reset_pin = -1;
++ cf->vcc_pin = -1;
++ cf->ready_pin = -1;
++ cf->cf_cs = board->cs;
++
++ if (board->detect_pin)
++ cf->detect_pin = request_pin(pdev, board->detect_pin,
++ "cf_detect");
++ if (board->reset_pin)
++ cf->reset_pin = request_pin(pdev, board->reset_pin,
++ "cf_reset");
++ if (board->vcc_pin)
++ cf->vcc_pin = request_pin(pdev, board->reset_pin,
++ "cf_vcc");
++ if (board->ready_pin)
++ /* READY is also used for irq through EIM */
++ cf->ready_pin = board->ready_pin;
++
++ debug(cf, 2, "pins: detect=%d reset=%d vcc=%d\n",
++ cf->detect_pin, cf->reset_pin, cf->vcc_pin);
++
++ cf->socket.pci_irq = irq;
++ cf->socket.ops = &at32_cf_ops;
++ cf->socket.resource_ops = &pccard_static_ops;
++ cf->socket.dev.parent = &pdev->dev;
++ cf->socket.owner = THIS_MODULE;
++ cf->socket.features =
++ SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
++ cf->socket.map_size = CF_RES_SIZE;
++
++ cf->res_attr.start = res_skt->start + CF_ATTR_OFFSET;
++ cf->res_attr.end = cf->res_attr.start + CF_RES_SIZE - 1;
++ cf->res_attr.name = "attribute";
++ cf->res_attr.flags = IORESOURCE_MEM;
++ ret = request_resource(res_skt, &cf->res_attr);
++ if (ret)
++ goto err_request_res_attr;
++
++ cf->res_mem.start = res_skt->start + CF_MEM_OFFSET;
++ cf->res_mem.end = cf->res_mem.start + CF_RES_SIZE - 1;
++ cf->res_mem.name = "memory";
++ cf->res_mem.flags = IORESOURCE_MEM;
++ ret = request_resource(res_skt, &cf->res_mem);
++ if (ret)
++ goto err_request_res_mem;
++
++ cf->res_io.start = res_skt->start + CF_IO_OFFSET;
++ cf->res_io.end = cf->res_io.start + CF_RES_SIZE - 1;
++ cf->res_io.name = "io";
++ cf->res_io.flags = IORESOURCE_MEM;
++ ret = request_resource(res_skt, &cf->res_io);
++ if (ret)
++ goto err_request_res_io;
++
++ cf->socket.io_offset = cf->res_io.start;
++
++ if (cf->detect_pin >= 0) {
++ ret = request_irq(gpio_to_irq(cf->detect_pin), at32_cf_irq,
++ IRQF_SHARED, "cf_detect", cf);
++ if (ret) {
++ debug(cf, 1,
++ "failed to request cf_detect interrupt\n");
++ goto err_detect_irq;
++ }
++ }
++
++ /* Setup SMC timings */
++ smc_set_timing(&cf->smc, &at32_cf_timing);
++
++ cf->smc.bus_width = 2;
++ cf->smc.nrd_controlled = 1;
++ cf->smc.nwe_controlled = 1;
++ cf->smc.nwait_mode = 0;
++ cf->smc.byte_write = 0;
++ cf->smc.tdf_cycles = 8;
++ cf->smc.tdf_mode = 0;
++
++ ret = smc_set_configuration(cf->cf_cs, &cf->smc);
++ if (ret) {
++ debug(cf, 1, "failed to configure SMC\n", ret);
++ goto err_smc;
++ }
++
++ ret = pcmcia_register_socket(&cf->socket);
++ if (ret) {
++ debug(cf, 1, "failed to register socket: %d\n", ret);
++ goto err_register_socket;
++ }
++
++ if (cf->reset_pin >= 0)
++ gpio_direction_output(cf->reset_pin, 0);
++
++ platform_set_drvdata(pdev, cf);
++
++ dev_info(&pdev->dev, "Atmel SMC CF interface at 0x%08lx\n",
++ (unsigned long)res_skt->start);
++
++ return 0;
++
++err_register_socket:
++err_smc:
++ if (cf->detect_pin >= 0)
++ free_irq(gpio_to_irq(cf->detect_pin), cf);
++err_detect_irq:
++ release_resource(&cf->res_io);
++err_request_res_io:
++ release_resource(&cf->res_mem);
++err_request_res_mem:
++ release_resource(&cf->res_attr);
++err_request_res_attr:
++ if (cf->vcc_pin >= 0)
++ gpio_free(cf->vcc_pin);
++ if (cf->reset_pin >= 0)
++ gpio_free(cf->reset_pin);
++ if (cf->detect_pin >= 0)
++ gpio_free(cf->detect_pin);
++ kfree(cf);
++
++ return ret;
++}
++
++static int __exit at32_cf_remove(struct platform_device *pdev)
++{
++ struct at32_cf_socket *cf = platform_get_drvdata(pdev);
++
++ pcmcia_unregister_socket(&cf->socket);
++ if (cf->detect_pin >= 0) {
++ free_irq(gpio_to_irq(cf->detect_pin), cf);
++ gpio_free(cf->detect_pin);
++ }
++ if (cf->vcc_pin >= 0)
++ gpio_free(cf->vcc_pin);
++ if (cf->reset_pin >= 0)
++ gpio_free(cf->reset_pin);
++
++ release_resource(&cf->res_io);
++ release_resource(&cf->res_mem);
++ release_resource(&cf->res_attr);
++ kfree(cf);
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++
++static struct platform_driver at32_cf_driver = {
++ .remove = __exit_p(at32_cf_remove),
++ .driver = {
++ .name = "at32_cf",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init at32_cf_init(void)
++{
++ int ret;
++
++ ret = platform_driver_probe(&at32_cf_driver, at32_cf_probe);
++ if (ret)
++ printk(KERN_ERR "at32_cf: probe failed: %d\n", ret);
++ return ret;
++}
++
++static void __exit at32_cf_exit(void)
++{
++ platform_driver_unregister(&at32_cf_driver);
++}
++
++module_init(at32_cf_init);
++module_exit(at32_cf_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Driver for SMC PCMCIA interface");
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
+index d154dee..06a85d7 100644
+--- a/drivers/pcmcia/cistpl.c
++++ b/drivers/pcmcia/cistpl.c
+@@ -25,6 +25,7 @@
+ #include <linux/ioport.h>
+ #include <asm/io.h>
+ #include <asm/byteorder.h>
++#include <asm/unaligned.h>
+
+ #include <pcmcia/cs_types.h>
+ #include <pcmcia/ss.h>
+@@ -401,6 +402,15 @@ EXPORT_SYMBOL(pcmcia_replace_cis);
+
+ ======================================================================*/
+
++static inline u16 cis_get_u16(void *ptr)
++{
++ return le16_to_cpu(get_unaligned((__le16 *) ptr));
++}
++static inline u32 cis_get_u32(void *ptr)
++{
++ return le32_to_cpu(get_unaligned((__le32 *) ptr));
++}
++
+ typedef struct tuple_flags {
+ u_int link_space:4;
+ u_int has_link:1;
+@@ -461,7 +471,7 @@ static int follow_link(struct pcmcia_socket *s, tuple_t *tuple)
+ /* Get indirect link from the MFC tuple */
+ read_cis_cache(s, LINK_SPACE(tuple->Flags),
+ tuple->LinkOffset, 5, link);
+- ofs = le32_to_cpu(*(__le32 *)(link+1));
++ ofs = cis_get_u32(link + 1);
+ SPACE(tuple->Flags) = (link[0] == CISTPL_MFC_ATTR);
+ /* Move to the next indirect link */
+ tuple->LinkOffset += 5;
+@@ -668,10 +678,10 @@ static int parse_checksum(tuple_t *tuple, cistpl_checksum_t *csum)
+ u_char *p;
+ if (tuple->TupleDataLen < 5)
+ return CS_BAD_TUPLE;
+- p = (u_char *)tuple->TupleData;
+- csum->addr = tuple->CISOffset+(short)le16_to_cpu(*(__le16 *)p)-2;
+- csum->len = le16_to_cpu(*(__le16 *)(p + 2));
+- csum->sum = *(p+4);
++ p = (u_char *) tuple->TupleData;
++ csum->addr = tuple->CISOffset + cis_get_u16(p) - 2;
++ csum->len = cis_get_u16(p + 2);
++ csum->sum = *(p + 4);
+ return CS_SUCCESS;
+ }
+
+@@ -681,7 +691,7 @@ static int parse_longlink(tuple_t *tuple, cistpl_longlink_t *link)
+ {
+ if (tuple->TupleDataLen < 4)
+ return CS_BAD_TUPLE;
+- link->addr = le32_to_cpu(*(__le32 *)tuple->TupleData);
++ link->addr = cis_get_u32(tuple->TupleData);
+ return CS_SUCCESS;
+ }
+
+@@ -700,7 +710,8 @@ static int parse_longlink_mfc(tuple_t *tuple,
+ return CS_BAD_TUPLE;
+ for (i = 0; i < link->nfn; i++) {
+ link->fn[i].space = *p; p++;
+- link->fn[i].addr = le32_to_cpu(*(__le32 *)p); p += 4;
++ link->fn[i].addr = cis_get_u32(p);
++ p += 4;
+ }
+ return CS_SUCCESS;
+ }
+@@ -787,12 +798,10 @@ static int parse_jedec(tuple_t *tuple, cistpl_jedec_t *jedec)
+
+ static int parse_manfid(tuple_t *tuple, cistpl_manfid_t *m)
+ {
+- __le16 *p;
+ if (tuple->TupleDataLen < 4)
+ return CS_BAD_TUPLE;
+- p = (__le16 *)tuple->TupleData;
+- m->manf = le16_to_cpu(p[0]);
+- m->card = le16_to_cpu(p[1]);
++ m->manf = cis_get_u16(tuple->TupleData);
++ m->card = cis_get_u16(tuple->TupleData + 2);
+ return CS_SUCCESS;
+ }
+
+@@ -1091,7 +1100,7 @@ static int parse_cftable_entry(tuple_t *tuple,
+ break;
+ case 0x20:
+ entry->mem.nwin = 1;
+- entry->mem.win[0].len = le16_to_cpu(*(__le16 *)p) << 8;
++ entry->mem.win[0].len = cis_get_u16(p) << 8;
+ entry->mem.win[0].card_addr = 0;
+ entry->mem.win[0].host_addr = 0;
+ p += 2;
+@@ -1099,9 +1108,8 @@ static int parse_cftable_entry(tuple_t *tuple,
+ break;
+ case 0x40:
+ entry->mem.nwin = 1;
+- entry->mem.win[0].len = le16_to_cpu(*(__le16 *)p) << 8;
+- entry->mem.win[0].card_addr =
+- le16_to_cpu(*(__le16 *)(p+2)) << 8;
++ entry->mem.win[0].len = cis_get_u16(p) << 8;
++ entry->mem.win[0].card_addr = cis_get_u16(p + 2) << 8;
+ entry->mem.win[0].host_addr = 0;
+ p += 4;
+ if (p > q) return CS_BAD_TUPLE;
+@@ -1138,7 +1146,7 @@ static int parse_bar(tuple_t *tuple, cistpl_bar_t *bar)
+ p = (u_char *)tuple->TupleData;
+ bar->attr = *p;
+ p += 2;
+- bar->size = le32_to_cpu(*(__le32 *)p);
++ bar->size = cis_get_u32(p);
+ return CS_SUCCESS;
+ }
+
+@@ -1151,7 +1159,7 @@ static int parse_config_cb(tuple_t *tuple, cistpl_config_t *config)
+ return CS_BAD_TUPLE;
+ config->last_idx = *(++p);
+ p++;
+- config->base = le32_to_cpu(*(__le32 *)p);
++ config->base = cis_get_u32(p);
+ config->subtuples = tuple->TupleDataLen - 6;
+ return CS_SUCCESS;
+ }
+@@ -1267,7 +1275,7 @@ static int parse_vers_2(tuple_t *tuple, cistpl_vers_2_t *v2)
+
+ v2->vers = p[0];
+ v2->comply = p[1];
+- v2->dindex = le16_to_cpu(*(__le16 *)(p+2));
++ v2->dindex = cis_get_u16(p +2 );
+ v2->vspec8 = p[6];
+ v2->vspec9 = p[7];
+ v2->nhdr = p[8];
+@@ -1308,8 +1316,8 @@ static int parse_format(tuple_t *tuple, cistpl_format_t *fmt)
+
+ fmt->type = p[0];
+ fmt->edc = p[1];
+- fmt->offset = le32_to_cpu(*(__le32 *)(p+2));
+- fmt->length = le32_to_cpu(*(__le32 *)(p+6));
++ fmt->offset = cis_get_u32(p + 2);
++ fmt->length = cis_get_u32(p + 6);
+
+ return CS_SUCCESS;
+ }
+diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
+index b046974..bc90604 100644
+--- a/drivers/spi/atmel_spi.c
++++ b/drivers/spi/atmel_spi.c
+@@ -491,8 +491,8 @@ static int atmel_spi_setup(struct spi_device *spi)
+ csr |= SPI_BIT(NCPHA);
+
+ /* TODO: DLYBS and DLYBCT */
+- csr |= SPI_BF(DLYBS, 10);
+- csr |= SPI_BF(DLYBCT, 10);
++ csr |= SPI_BF(DLYBS, 0);
++ csr |= SPI_BF(DLYBCT, 0);
+
+ /* chipselect must have been muxed as GPIO (e.g. in board setup) */
+ npcs_pin = (unsigned int)spi->controller_data;
+diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
+index 767aed5..f81d08d 100644
+--- a/drivers/usb/gadget/Kconfig
++++ b/drivers/usb/gadget/Kconfig
+@@ -67,6 +67,17 @@ config USB_GADGET_DEBUG_FILES
+ driver on a new board. Enable these files by choosing "Y"
+ here. If in doubt, or to conserve kernel memory, say "N".
+
++config USB_GADGET_DEBUG_FS
++ boolean "Debugging information files in debugfs"
++ depends on USB_GADGET && DEBUG_FS
++ help
++ Some of the drivers in the "gadget" framework can expose
++ debugging information in files under /sys/kernel/debug/.
++ The information in these files may help when you're
++ troubleshooting or bringing up a driver on a new board.
++ Enable these files by choosing "Y" here. If in doubt, or
++ to conserve kernel memory, say "N".
++
+ config USB_GADGET_SELECTED
+ boolean
+
+@@ -103,6 +114,20 @@ config USB_AMD5536UDC
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
++config USB_GADGET_ATMEL_USBA
++ boolean "Atmel USBA"
++ select USB_GADGET_DUALSPEED
++ depends on AVR32
++ help
++ USBA is the integrated high-speed USB Device controller on
++ the AT32AP700x processors from Atmel.
++
++config USB_ATMEL_USBA
++ tristate
++ depends on USB_GADGET_ATMEL_USBA
++ default USB_GADGET
++ select USB_GADGET_SELECTED
++
+ config USB_GADGET_FSL_USB2
+ boolean "Freescale Highspeed USB DR Peripheral Controller"
+ depends on MPC834x || PPC_MPC831x
+@@ -228,7 +253,6 @@ config USB_LH7A40X
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
+-
+ config USB_GADGET_OMAP
+ boolean "OMAP USB Device Controller"
+ depends on ARCH_OMAP
+diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
+index 1bc0f03..904e57b 100644
+--- a/drivers/usb/gadget/Makefile
++++ b/drivers/usb/gadget/Makefile
+@@ -14,6 +14,7 @@ obj-$(CONFIG_USB_OMAP) += omap_udc.o
+ obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
+ obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o
+ obj-$(CONFIG_USB_AT91) += at91_udc.o
++obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o
+ obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
+ obj-$(CONFIG_USB_M66592) += m66592-udc.o
+
+diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
+new file mode 100644
+index 0000000..e35362d
+--- /dev/null
++++ b/drivers/usb/gadget/atmel_usba_udc.c
+@@ -0,0 +1,2038 @@
++/*
++ * Driver for the Atmel USBA high speed USB device controller
++ *
++ * Copyright (C) 2005-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/io.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/list.h>
++#include <linux/platform_device.h>
++#include <linux/usb/ch9.h>
++#include <linux/usb_gadget.h>
++#include <linux/delay.h>
++
++#include <asm/gpio.h>
++#include <asm/arch/board.h>
++
++#include "atmel_usba_udc.h"
++
++
++static struct usba_udc the_udc;
++
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
++#include <linux/debugfs.h>
++#include <linux/uaccess.h>
++
++static int queue_dbg_open(struct inode *inode, struct file *file)
++{
++ struct usba_ep *ep = inode->i_private;
++ struct usba_request *req, *req_copy;
++ struct list_head *queue_data;
++
++ queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL);
++ if (!queue_data)
++ return -ENOMEM;
++ INIT_LIST_HEAD(queue_data);
++
++ spin_lock_irq(&ep->udc->lock);
++ list_for_each_entry(req, &ep->queue, queue) {
++ req_copy = kmalloc(sizeof(*req_copy), GFP_ATOMIC);
++ if (!req_copy)
++ goto fail;
++ memcpy(req_copy, req, sizeof(*req_copy));
++ list_add_tail(&req_copy->queue, queue_data);
++ }
++ spin_unlock_irq(&ep->udc->lock);
++
++ file->private_data = queue_data;
++ return 0;
++
++fail:
++ spin_unlock_irq(&ep->udc->lock);
++ list_for_each_entry_safe(req, req_copy, queue_data, queue) {
++ list_del(&req->queue);
++ kfree(req);
++ }
++ kfree(queue_data);
++ return -ENOMEM;
++}
++
++/*
++ * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0
++ *
++ * b: buffer address
++ * l: buffer length
++ * I/i: interrupt/no interrupt
++ * Z/z: zero/no zero
++ * S/s: short ok/short not ok
++ * s: status
++ * n: nr_packets
++ * F/f: submitted/not submitted to FIFO
++ * D/d: using/not using DMA
++ * L/l: last transaction/not last transaction
++ */
++static ssize_t queue_dbg_read(struct file *file, char __user *buf,
++ size_t nbytes, loff_t *ppos)
++{
++ struct list_head *queue = file->private_data;
++ struct usba_request *req, *tmp_req;
++ size_t len, remaining, actual = 0;
++ char tmpbuf[38];
++
++ if (!access_ok(VERIFY_WRITE, buf, nbytes))
++ return -EFAULT;
++
++ mutex_lock(&file->f_dentry->d_inode->i_mutex);
++ list_for_each_entry_safe(req, tmp_req, queue, queue) {
++ len = snprintf(tmpbuf, sizeof(tmpbuf),
++ "%8p %08x %c%c%c %5d %c%c%c\n",
++ req->req.buf, req->req.length,
++ req->req.no_interrupt ? 'i' : 'I',
++ req->req.zero ? 'Z' : 'z',
++ req->req.short_not_ok ? 's' : 'S',
++ req->req.status,
++ req->submitted ? 'F' : 'f',
++ req->using_dma ? 'D' : 'd',
++ req->last_transaction ? 'L' : 'l');
++ len = min(len, sizeof(tmpbuf));
++ if (len > nbytes)
++ break;
++
++ list_del(&req->queue);
++ kfree(req);
++
++ remaining = __copy_to_user(buf, tmpbuf, len);
++ actual += len - remaining;
++ if (remaining)
++ break;
++
++ nbytes -= len;
++ buf += len;
++ }
++ mutex_unlock(&file->f_dentry->d_inode->i_mutex);
++
++ return actual;
++}
++
++static int queue_dbg_release(struct inode *inode, struct file *file)
++{
++ struct list_head *queue_data = file->private_data;
++ struct usba_request *req, *tmp_req;
++
++ list_for_each_entry_safe(req, tmp_req, queue_data, queue) {
++ list_del(&req->queue);
++ kfree(req);
++ }
++ kfree(queue_data);
++ return 0;
++}
++
++static int regs_dbg_open(struct inode *inode, struct file *file)
++{
++ struct usba_udc *udc;
++ unsigned int i;
++ u32 *data;
++ int ret = -ENOMEM;
++
++ mutex_lock(&inode->i_mutex);
++ udc = inode->i_private;
++ data = kmalloc(inode->i_size, GFP_KERNEL);
++ if (!data)
++ goto out;
++
++ spin_lock_irq(&udc->lock);
++ for (i = 0; i < inode->i_size / 4; i++)
++ data[i] = __raw_readl(udc->regs + i * 4);
++ spin_unlock_irq(&udc->lock);
++
++ file->private_data = data;
++ ret = 0;
++
++out:
++ mutex_unlock(&inode->i_mutex);
++
++ return ret;
++}
++
++static ssize_t regs_dbg_read(struct file *file, char __user *buf,
++ size_t nbytes, loff_t *ppos)
++{
++ struct inode *inode = file->f_dentry->d_inode;
++ int ret;
++
++ mutex_lock(&inode->i_mutex);
++ ret = simple_read_from_buffer(buf, nbytes, ppos,
++ file->private_data,
++ file->f_dentry->d_inode->i_size);
++ mutex_unlock(&inode->i_mutex);
++
++ return ret;
++}
++
++static int regs_dbg_release(struct inode *inode, struct file *file)
++{
++ kfree(file->private_data);
++ return 0;
++}
++
++const struct file_operations queue_dbg_fops = {
++ .owner = THIS_MODULE,
++ .open = queue_dbg_open,
++ .llseek = no_llseek,
++ .read = queue_dbg_read,
++ .release = queue_dbg_release,
++};
++
++const struct file_operations regs_dbg_fops = {
++ .owner = THIS_MODULE,
++ .open = regs_dbg_open,
++ .llseek = generic_file_llseek,
++ .read = regs_dbg_read,
++ .release = regs_dbg_release,
++};
++
++static void usba_ep_init_debugfs(struct usba_udc *udc,
++ struct usba_ep *ep)
++{
++ struct dentry *ep_root;
++
++ ep_root = debugfs_create_dir(ep->ep.name, udc->debugfs_root);
++ if (!ep_root)
++ goto err_root;
++ ep->debugfs_dir = ep_root;
++
++ ep->debugfs_queue = debugfs_create_file("queue", 0400, ep_root,
++ ep, &queue_dbg_fops);
++ if (!ep->debugfs_queue)
++ goto err_queue;
++
++ if (ep->can_dma) {
++ ep->debugfs_dma_status
++ = debugfs_create_u32("dma_status", 0400, ep_root,
++ &ep->last_dma_status);
++ if (!ep->debugfs_dma_status)
++ goto err_dma_status;
++ }
++ if (ep_is_control(ep)) {
++ ep->debugfs_state
++ = debugfs_create_u32("state", 0400, ep_root,
++ &ep->state);
++ if (!ep->debugfs_state)
++ goto err_state;
++ }
++
++ return;
++
++err_state:
++ if (ep->can_dma)
++ debugfs_remove(ep->debugfs_dma_status);
++err_dma_status:
++ debugfs_remove(ep->debugfs_queue);
++err_queue:
++ debugfs_remove(ep_root);
++err_root:
++ dev_err(&ep->udc->pdev->dev,
++ "failed to create debugfs directory for %s\n", ep->ep.name);
++}
++
++static void usba_ep_cleanup_debugfs(struct usba_ep *ep)
++{
++ debugfs_remove(ep->debugfs_queue);
++ debugfs_remove(ep->debugfs_dma_status);
++ debugfs_remove(ep->debugfs_state);
++ debugfs_remove(ep->debugfs_dir);
++ ep->debugfs_dma_status = NULL;
++ ep->debugfs_dir = NULL;
++}
++
++static void usba_init_debugfs(struct usba_udc *udc)
++{
++ struct dentry *root, *regs;
++ struct resource *regs_resource;
++
++ root = debugfs_create_dir(udc->gadget.name, NULL);
++ if (IS_ERR(root) || !root)
++ goto err_root;
++ udc->debugfs_root = root;
++
++ regs = debugfs_create_file("regs", 0400, root, udc, &regs_dbg_fops);
++ if (!regs)
++ goto err_regs;
++
++ regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM,
++ CTRL_IOMEM_ID);
++ regs->d_inode->i_size = regs_resource->end - regs_resource->start + 1;
++ udc->debugfs_regs = regs;
++
++ usba_ep_init_debugfs(udc, to_usba_ep(udc->gadget.ep0));
++
++ return;
++
++err_regs:
++ debugfs_remove(root);
++err_root:
++ udc->debugfs_root = NULL;
++ dev_err(&udc->pdev->dev, "debugfs is not available\n");
++}
++
++static void usba_cleanup_debugfs(struct usba_udc *udc)
++{
++ usba_ep_cleanup_debugfs(to_usba_ep(udc->gadget.ep0));
++ debugfs_remove(udc->debugfs_regs);
++ debugfs_remove(udc->debugfs_root);
++ udc->debugfs_regs = NULL;
++ udc->debugfs_root = NULL;
++}
++#else
++static inline void usba_ep_init_debugfs(struct usba_udc *udc,
++ struct usba_ep *ep)
++{
++
++}
++
++static inline void usba_ep_cleanup_debugfs(struct usba_ep *ep)
++{
++
++}
++
++static inline void usba_init_debugfs(struct usba_udc *udc)
++{
++
++}
++
++static inline void usba_cleanup_debugfs(struct usba_udc *udc)
++{
++
++}
++#endif
++
++static int vbus_is_present(struct usba_udc *udc)
++{
++ if (udc->vbus_pin != -1)
++ return gpio_get_value(udc->vbus_pin);
++
++ /* No Vbus detection: Assume always present */
++ return 1;
++}
++
++static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
++{
++ unsigned long tmp;
++
++ DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
++ for (; len > 0; len -= 4, buf += 4, fifo += 4) {
++ tmp = *(unsigned long *)buf;
++ if (len >= 4) {
++ DBG(DBG_FIFO, " -> %08lx\n", tmp);
++ __raw_writel(tmp, fifo);
++ } else {
++ do {
++ DBG(DBG_FIFO, " -> %02lx\n", tmp >> 24);
++ __raw_writeb(tmp >> 24, fifo);
++ fifo++;
++ tmp <<= 8;
++ } while (--len);
++ break;
++ }
++ }
++}
++
++static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
++{
++ union {
++ unsigned long *w;
++ unsigned char *b;
++ } p;
++ unsigned long tmp;
++
++ DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
++ for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
++ if (len >= 4) {
++ tmp = __raw_readl(fifo);
++ *p.w = tmp;
++ DBG(DBG_FIFO, " -> %08lx\n", tmp);
++ } else {
++ do {
++ tmp = __raw_readb(fifo);
++ *p.b = tmp;
++ DBG(DBG_FIFO, " -> %02lx\n", tmp);
++ fifo++, p.b++;
++ } while (--len);
++ }
++ }
++}
++
++static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
++{
++ unsigned int transaction_len;
++
++ transaction_len = req->req.length - req->req.actual;
++ req->last_transaction = 1;
++ if (transaction_len > ep->ep.maxpacket) {
++ transaction_len = ep->ep.maxpacket;
++ req->last_transaction = 0;
++ } else if (transaction_len == ep->ep.maxpacket && req->req.zero)
++ req->last_transaction = 0;
++
++ DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n",
++ ep->ep.name, req, transaction_len,
++ req->last_transaction ? ", done" : "");
++
++ copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
++ usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
++ req->req.actual += transaction_len;
++}
++
++static void submit_request(struct usba_ep *ep, struct usba_request *req)
++{
++ DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n",
++ ep->ep.name, req, req->req.length);
++
++ req->req.actual = 0;
++ req->submitted = 1;
++
++ if (req->using_dma) {
++ if (req->req.length == 0) {
++ usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
++ return;
++ }
++
++ if (req->req.zero)
++ usba_ep_writel(ep, CTL_ENB, USBA_SHORT_PACKET);
++ else
++ usba_ep_writel(ep, CTL_DIS, USBA_SHORT_PACKET);
++
++ usba_dma_writel(ep, ADDRESS, req->req.dma);
++ usba_dma_writel(ep, CONTROL, req->ctrl);
++ } else {
++ next_fifo_transaction(ep, req);
++ if (req->last_transaction) {
++ usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
++ usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
++ } else {
++ usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
++ usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
++ }
++ }
++}
++
++static void submit_next_request(struct usba_ep *ep)
++{
++ struct usba_request *req;
++
++ if (list_empty(&ep->queue)) {
++ usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY | USBA_RX_BK_RDY);
++ return;
++ }
++
++ req = list_entry(ep->queue.next, struct usba_request, queue);
++ if (!req->submitted)
++ submit_request(ep, req);
++}
++
++static void send_status(struct usba_udc *udc, struct usba_ep *ep)
++{
++ ep->state = STATUS_STAGE_IN;
++ usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
++ usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
++}
++
++static void receive_data(struct usba_ep *ep)
++{
++ struct usba_udc *udc = ep->udc;
++ struct usba_request *req;
++ unsigned long status;
++ unsigned int bytecount, nr_busy;
++ int is_complete = 0;
++
++ status = usba_ep_readl(ep, STA);
++ nr_busy = USBA_BFEXT(BUSY_BANKS, status);
++
++ DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy);
++
++ while (nr_busy > 0) {
++ if (list_empty(&ep->queue)) {
++ usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
++ break;
++ }
++ req = list_entry(ep->queue.next,
++ struct usba_request, queue);
++
++ bytecount = USBA_BFEXT(BYTE_COUNT, status);
++
++ if (status & (1 << 31))
++ is_complete = 1;
++ if (req->req.actual + bytecount >= req->req.length) {
++ is_complete = 1;
++ bytecount = req->req.length - req->req.actual;
++ }
++
++ copy_from_fifo(req->req.buf + req->req.actual,
++ ep->fifo, bytecount);
++ req->req.actual += bytecount;
++
++ usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
++
++ if (is_complete) {
++ DBG(DBG_QUEUE, "%s: request done\n", ep->ep.name);
++ req->req.status = 0;
++ list_del_init(&req->queue);
++ usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
++ spin_unlock(&udc->lock);
++ req->req.complete(&ep->ep, &req->req);
++ spin_lock(&udc->lock);
++ }
++
++ status = usba_ep_readl(ep, STA);
++ nr_busy = USBA_BFEXT(BUSY_BANKS, status);
++
++ if (is_complete && ep_is_control(ep)) {
++ send_status(udc, ep);
++ break;
++ }
++ }
++}
++
++static void
++request_complete(struct usba_ep *ep, struct usba_request *req, int status)
++{
++ struct usba_udc *udc = ep->udc;
++
++ WARN_ON(!list_empty(&req->queue));
++
++ if (req->req.status == -EINPROGRESS)
++ req->req.status = status;
++
++ if (req->mapped) {
++ dma_unmap_single(
++ &udc->pdev->dev, req->req.dma, req->req.length,
++ ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
++ req->req.dma = DMA_ADDR_INVALID;
++ req->mapped = 0;
++ }
++
++ DBG(DBG_GADGET | DBG_REQ,
++ "%s: req %p complete: status %d, actual %u\n",
++ ep->ep.name, req, req->req.status, req->req.actual);
++
++ spin_unlock(&udc->lock);
++ req->req.complete(&ep->ep, &req->req);
++ spin_lock(&udc->lock);
++}
++
++static void
++request_complete_list(struct usba_ep *ep, struct list_head *list, int status)
++{
++ struct usba_request *req, *tmp_req;
++
++ list_for_each_entry_safe(req, tmp_req, list, queue) {
++ list_del_init(&req->queue);
++ request_complete(ep, req, status);
++ }
++}
++
++static int
++usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
++{
++ struct usba_ep *ep = to_usba_ep(_ep);
++ struct usba_udc *udc = ep->udc;
++ unsigned long flags, ept_cfg, maxpacket;
++ unsigned int nr_trans;
++
++ DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc);
++
++ maxpacket = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff;
++
++ if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != ep->index)
++ || ep->index == 0
++ || desc->bDescriptorType != USB_DT_ENDPOINT
++ || maxpacket == 0
++ || maxpacket > ep->fifo_size) {
++ DBG(DBG_ERR, "ep_enable: Invalid argument");
++ return -EINVAL;
++ }
++
++ ep->is_isoc = 0;
++ ep->is_in = 0;
++
++ if (maxpacket <= 8)
++ ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8);
++ else
++ /* LSB is bit 1, not 0 */
++ ept_cfg = USBA_BF(EPT_SIZE, fls(maxpacket - 1) - 3);
++
++ DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
++ ep->ep.name, ept_cfg, maxpacket);
++
++ if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
++ ep->is_in = 1;
++ ept_cfg |= USBA_EPT_DIR_IN;
++ }
++
++ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
++ case USB_ENDPOINT_XFER_CONTROL:
++ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL);
++ ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE);
++ break;
++ case USB_ENDPOINT_XFER_ISOC:
++ if (!ep->can_isoc) {
++ DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n",
++ ep->ep.name);
++ return -EINVAL;
++ }
++
++ /*
++ * Bits 11:12 specify number of _additional_
++ * transactions per microframe.
++ */
++ nr_trans = ((le16_to_cpu(desc->wMaxPacketSize) >> 11) & 3) + 1;
++ if (nr_trans > 3)
++ return -EINVAL;
++
++ ep->is_isoc = 1;
++ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO);
++
++ /*
++ * Do triple-buffering on high-bandwidth iso endpoints.
++ */
++ if (nr_trans > 1 && ep->nr_banks == 3)
++ ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_TRIPLE);
++ else
++ ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
++ ept_cfg |= USBA_BF(NB_TRANS, nr_trans);
++ break;
++ case USB_ENDPOINT_XFER_BULK:
++ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK);
++ ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
++ break;
++ case USB_ENDPOINT_XFER_INT:
++ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT);
++ ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
++ break;
++ }
++
++ spin_lock_irqsave(&ep->udc->lock, flags);
++
++ if (ep->desc) {
++ spin_unlock_irqrestore(&ep->udc->lock, flags);
++ DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
++ return -EBUSY;
++ }
++
++ ep->desc = desc;
++ ep->ep.maxpacket = maxpacket;
++
++ usba_ep_writel(ep, CFG, ept_cfg);
++ usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
++
++ if (ep->can_dma) {
++ u32 ctrl;
++
++ usba_writel(udc, INT_ENB,
++ (usba_readl(udc, INT_ENB)
++ | USBA_BF(EPT_INT, 1 << ep->index)
++ | USBA_BF(DMA_INT, 1 << ep->index)));
++ ctrl = USBA_AUTO_VALID | USBA_INTDIS_DMA;
++ usba_ep_writel(ep, CTL_ENB, ctrl);
++ } else {
++ usba_writel(udc, INT_ENB,
++ (usba_readl(udc, INT_ENB)
++ | USBA_BF(EPT_INT, 1 << ep->index)));
++ }
++
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index,
++ (unsigned long)usba_ep_readl(ep, CFG));
++ DBG(DBG_HW, "INT_ENB after init: %#08lx\n",
++ (unsigned long)usba_readl(udc, INT_ENB));
++
++ return 0;
++}
++
++static int usba_ep_disable(struct usb_ep *_ep)
++{
++ struct usba_ep *ep = to_usba_ep(_ep);
++ struct usba_udc *udc = ep->udc;
++ LIST_HEAD(req_list);
++ unsigned long flags;
++
++ DBG(DBG_GADGET, "ep_disable: %s\n", ep->ep.name);
++
++ spin_lock_irqsave(&udc->lock, flags);
++
++ if (!ep->desc) {
++ spin_unlock_irqrestore(&udc->lock, flags);
++ DBG(DBG_ERR, "ep_disable: %s not enabled\n", ep->ep.name);
++ return -EINVAL;
++ }
++ ep->desc = NULL;
++
++ list_splice_init(&ep->queue, &req_list);
++ if (ep->can_dma) {
++ usba_dma_writel(ep, CONTROL, 0);
++ usba_dma_writel(ep, ADDRESS, 0);
++ usba_dma_readl(ep, STATUS);
++ }
++ usba_ep_writel(ep, CTL_DIS, USBA_EPT_ENABLE);
++ usba_writel(udc, INT_ENB,
++ usba_readl(udc, INT_ENB)
++ & ~USBA_BF(EPT_INT, 1 << ep->index));
++
++ request_complete_list(ep, &req_list, -ESHUTDOWN);
++
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ return 0;
++}
++
++static struct usb_request *
++usba_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
++{
++ struct usba_request *req;
++
++ DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags);
++
++ req = kzalloc(sizeof(*req), gfp_flags);
++ if (!req)
++ return NULL;
++
++ INIT_LIST_HEAD(&req->queue);
++ req->req.dma = DMA_ADDR_INVALID;
++
++ return &req->req;
++}
++
++static void
++usba_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
++{
++ struct usba_request *req = to_usba_req(_req);
++
++ DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req);
++
++ kfree(req);
++}
++
++static int queue_dma(struct usba_udc *udc, struct usba_ep *ep,
++ struct usba_request *req, gfp_t gfp_flags)
++{
++ unsigned long flags;
++ int ret;
++
++ DBG(DBG_DMA, "%s: req l/%u d/%08x %c%c%c\n",
++ ep->ep.name, req->req.length, req->req.dma,
++ req->req.zero ? 'Z' : 'z',
++ req->req.short_not_ok ? 'S' : 's',
++ req->req.no_interrupt ? 'I' : 'i');
++
++ if (req->req.length > 0x10000) {
++ /* Lengths from 0 to 65536 (inclusive) are supported */
++ DBG(DBG_ERR, "invalid request length %u\n", req->req.length);
++ return -EINVAL;
++ }
++
++ req->using_dma = 1;
++
++ if (req->req.dma == DMA_ADDR_INVALID) {
++ req->req.dma = dma_map_single(
++ &udc->pdev->dev, req->req.buf, req->req.length,
++ ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
++ req->mapped = 1;
++ } else {
++ dma_sync_single_for_device(
++ &udc->pdev->dev, req->req.dma, req->req.length,
++ ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
++ req->mapped = 0;
++ }
++
++ req->ctrl = USBA_BF(DMA_BUF_LEN, req->req.length)
++ | USBA_DMA_CH_EN | USBA_DMA_END_BUF_IE
++ | USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE;
++
++ if (ep->is_in)
++ req->ctrl |= USBA_DMA_END_BUF_EN;
++
++ /*
++ * Add this request to the queue and submit for DMA if
++ * possible. Check if we're still alive first -- we may have
++ * received a reset since last time we checked.
++ */
++ ret = -ESHUTDOWN;
++ spin_lock_irqsave(&udc->lock, flags);
++ if (ep->desc) {
++ if (list_empty(&ep->queue))
++ submit_request(ep, req);
++
++ list_add_tail(&req->queue, &ep->queue);
++ ret = 0;
++ }
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ return ret;
++}
++
++static int
++usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
++{
++ struct usba_request *req = to_usba_req(_req);
++ struct usba_ep *ep = to_usba_ep(_ep);
++ struct usba_udc *udc = ep->udc;
++ unsigned long flags;
++ int ret;
++
++ DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ, "%s: queue req %p, len %u\n",
++ ep->ep.name, req, _req->length);
++
++ if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN || !ep->desc)
++ return -ESHUTDOWN;
++
++ req->submitted = 0;
++ req->using_dma = 0;
++ req->last_transaction = 0;
++
++ _req->status = -EINPROGRESS;
++ _req->actual = 0;
++
++ if (ep->can_dma)
++ return queue_dma(udc, ep, req, gfp_flags);
++
++ /* May have received a reset since last time we checked */
++ ret = -ESHUTDOWN;
++ spin_lock_irqsave(&udc->lock, flags);
++ if (ep->desc) {
++ list_add_tail(&req->queue, &ep->queue);
++
++ if (ep->is_in || (ep_is_control(ep)
++ && (ep->state == DATA_STAGE_IN
++ || ep->state == STATUS_STAGE_IN)))
++ usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
++ else
++ usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY);
++ ret = 0;
++ }
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ return ret;
++}
++
++static void
++usba_update_req(struct usba_ep *ep, struct usba_request *req, u32 status)
++{
++ req->req.actual = req->req.length - USBA_BFEXT(DMA_BUF_LEN, status);
++}
++
++static int stop_dma(struct usba_ep *ep, u32 *pstatus)
++{
++ unsigned int timeout;
++ u32 status;
++
++ /*
++ * Stop the DMA controller. When writing both CH_EN
++ * and LINK to 0, the other bits are not affected.
++ */
++ usba_dma_writel(ep, CONTROL, 0);
++
++ /* Wait for the FIFO to empty */
++ for (timeout = 40; timeout; --timeout) {
++ status = usba_dma_readl(ep, STATUS);
++ if (!(status & USBA_DMA_CH_EN))
++ break;
++ udelay(1);
++ }
++
++ if (pstatus)
++ *pstatus = status;
++
++ if (timeout == 0) {
++ dev_err(&ep->udc->pdev->dev,
++ "%s: timed out waiting for DMA FIFO to empty\n",
++ ep->ep.name);
++ return -ETIMEDOUT;
++ }
++
++ return 0;
++}
++
++static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
++{
++ struct usba_ep *ep = to_usba_ep(_ep);
++ struct usba_udc *udc = ep->udc;
++ struct usba_request *req = to_usba_req(_req);
++ unsigned long flags;
++ u32 status;
++
++ DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n",
++ ep->ep.name, req);
++
++ spin_lock_irqsave(&udc->lock, flags);
++
++ if (req->using_dma) {
++ /*
++ * If this request is currently being transferred,
++ * stop the DMA controller and reset the FIFO.
++ */
++ if (ep->queue.next == &req->queue) {
++ status = usba_dma_readl(ep, STATUS);
++ if (status & USBA_DMA_CH_EN)
++ stop_dma(ep, &status);
++
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
++ ep->last_dma_status = status;
++#endif
++
++ usba_writel(udc, EPT_RST, 1 << ep->index);
++
++ usba_update_req(ep, req, status);
++ }
++ }
++
++ /*
++ * Errors should stop the queue from advancing until the
++ * completion function returns.
++ */
++ list_del_init(&req->queue);
++
++ request_complete(ep, req, -ECONNRESET);
++
++ /* Process the next request if any */
++ submit_next_request(ep);
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ return 0;
++}
++
++static int usba_ep_set_halt(struct usb_ep *_ep, int value)
++{
++ struct usba_ep *ep = to_usba_ep(_ep);
++ struct usba_udc *udc = ep->udc;
++ unsigned long flags;
++ int ret = 0;
++
++ DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep->ep.name,
++ value ? "set" : "clear");
++
++ if (!ep->desc) {
++ DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n",
++ ep->ep.name);
++ return -ENODEV;
++ }
++ if (ep->is_isoc) {
++ DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n",
++ ep->ep.name);
++ return -ENOTTY;
++ }
++
++ spin_lock_irqsave(&udc->lock, flags);
++
++ /*
++ * We can't halt IN endpoints while there are still data to be
++ * transferred
++ */
++ if (!list_empty(&ep->queue)
++ || ((value && ep->is_in && (usba_ep_readl(ep, STA)
++ & USBA_BF(BUSY_BANKS, -1L))))) {
++ ret = -EAGAIN;
++ } else {
++ if (value)
++ usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL);
++ else
++ usba_ep_writel(ep, CLR_STA,
++ USBA_FORCE_STALL | USBA_TOGGLE_CLR);
++ usba_ep_readl(ep, STA);
++ }
++
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ return ret;
++}
++
++static int usba_ep_fifo_status(struct usb_ep *_ep)
++{
++ struct usba_ep *ep = to_usba_ep(_ep);
++
++ return USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
++}
++
++static void usba_ep_fifo_flush(struct usb_ep *_ep)
++{
++ struct usba_ep *ep = to_usba_ep(_ep);
++ struct usba_udc *udc = ep->udc;
++
++ usba_writel(udc, EPT_RST, 1 << ep->index);
++}
++
++static const struct usb_ep_ops usba_ep_ops = {
++ .enable = usba_ep_enable,
++ .disable = usba_ep_disable,
++ .alloc_request = usba_ep_alloc_request,
++ .free_request = usba_ep_free_request,
++ .queue = usba_ep_queue,
++ .dequeue = usba_ep_dequeue,
++ .set_halt = usba_ep_set_halt,
++ .fifo_status = usba_ep_fifo_status,
++ .fifo_flush = usba_ep_fifo_flush,
++};
++
++static int usba_udc_get_frame(struct usb_gadget *gadget)
++{
++ struct usba_udc *udc = to_usba_udc(gadget);
++
++ return USBA_BFEXT(FRAME_NUMBER, usba_readl(udc, FNUM));
++}
++
++static const struct usb_gadget_ops usba_udc_ops = {
++ .get_frame = usba_udc_get_frame,
++};
++
++#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
++{ \
++ .ep = { \
++ .ops = &usba_ep_ops, \
++ .name = nam, \
++ .maxpacket = maxpkt, \
++ }, \
++ .udc = &the_udc, \
++ .queue = LIST_HEAD_INIT(usba_ep[idx].queue), \
++ .fifo_size = maxpkt, \
++ .nr_banks = maxbk, \
++ .index = idx, \
++ .can_dma = dma, \
++ .can_isoc = isoc, \
++}
++
++static struct usba_ep usba_ep[] = {
++ EP("ep0", 0, 64, 1, 0, 0),
++ EP("ep1in-bulk", 1, 512, 2, 1, 1),
++ EP("ep2out-bulk", 2, 512, 2, 1, 1),
++ EP("ep3in-int", 3, 64, 3, 1, 0),
++ EP("ep4out-int", 4, 64, 3, 1, 0),
++ EP("ep5in-iso", 5, 1024, 3, 1, 1),
++ EP("ep6out-iso", 6, 1024, 3, 1, 1),
++};
++#undef EP
++
++static struct usb_endpoint_descriptor usba_ep0_desc = {
++ .bLength = USB_DT_ENDPOINT_SIZE,
++ .bDescriptorType = USB_DT_ENDPOINT,
++ .bEndpointAddress = 0,
++ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
++ .wMaxPacketSize = __constant_cpu_to_le16(64),
++ /* FIXME: I have no idea what to put here */
++ .bInterval = 1,
++};
++
++static void nop_release(struct device *dev)
++{
++
++}
++
++static struct usba_udc the_udc = {
++ .gadget = {
++ .ops = &usba_udc_ops,
++ .ep0 = &usba_ep[0].ep,
++ .ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list),
++ .is_dualspeed = 1,
++ .name = "atmel_usba_udc",
++ .dev = {
++ .bus_id = "gadget",
++ .release = nop_release,
++ },
++ },
++
++ .lock = SPIN_LOCK_UNLOCKED,
++};
++
++/*
++ * Called with interrupts disabled and udc->lock held.
++ */
++static void reset_all_endpoints(struct usba_udc *udc)
++{
++ struct usba_ep *ep;
++ struct usba_request *req, *tmp_req;
++
++ usba_writel(udc, EPT_RST, ~0UL);
++
++ ep = to_usba_ep(udc->gadget.ep0);
++ list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) {
++ list_del_init(&req->queue);
++ request_complete(ep, req, -ECONNRESET);
++ }
++
++ list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
++ if (ep->desc)
++ usba_ep_disable(&ep->ep);
++ }
++}
++
++static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex)
++{
++ struct usba_ep *ep;
++
++ if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
++ return to_usba_ep(udc->gadget.ep0);
++
++ list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
++ u8 bEndpointAddress;
++
++ if (!ep->desc)
++ continue;
++ bEndpointAddress = ep->desc->bEndpointAddress;
++ if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
++ continue;
++ if ((bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
++ == (wIndex & USB_ENDPOINT_NUMBER_MASK))
++ return ep;
++ }
++
++ return NULL;
++}
++
++/* Called with interrupts disabled and udc->lock held */
++static inline void set_protocol_stall(struct usba_udc *udc, struct usba_ep *ep)
++{
++ usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL);
++ ep->state = WAIT_FOR_SETUP;
++}
++
++static inline int is_stalled(struct usba_udc *udc, struct usba_ep *ep)
++{
++ if (usba_ep_readl(ep, STA) & USBA_FORCE_STALL)
++ return 1;
++ return 0;
++}
++
++static inline void set_address(struct usba_udc *udc, unsigned int addr)
++{
++ u32 regval;
++
++ DBG(DBG_BUS, "setting address %u...\n", addr);
++ regval = usba_readl(udc, CTRL);
++ regval = USBA_BFINS(DEV_ADDR, addr, regval);
++ usba_writel(udc, CTRL, regval);
++}
++
++static int do_test_mode(struct usba_udc *udc)
++{
++ static const char test_packet_buffer[] = {
++ /* JKJKJKJK * 9 */
++ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++ /* JJKKJJKK * 8 */
++ 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
++ /* JJKKJJKK * 8 */
++ 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
++ /* JJJJJJJKKKKKKK * 8 */
++ 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
++ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
++ /* JJJJJJJK * 8 */
++ 0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
++ /* {JKKKKKKK * 10}, JK */
++ 0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E
++ };
++ struct usba_ep *ep;
++ struct device *dev = &udc->pdev->dev;
++ int test_mode;
++
++ test_mode = udc->test_mode;
++
++ /* Start from a clean slate */
++ reset_all_endpoints(udc);
++
++ switch (test_mode) {
++ case 0x0100:
++ /* Test_J */
++ usba_writel(udc, TST, USBA_TST_J_MODE);
++ dev_info(dev, "Entering Test_J mode...\n");
++ break;
++ case 0x0200:
++ /* Test_K */
++ usba_writel(udc, TST, USBA_TST_K_MODE);
++ dev_info(dev, "Entering Test_K mode...\n");
++ break;
++ case 0x0300:
++ /*
++ * Test_SE0_NAK: Force high-speed mode and set up ep0
++ * for Bulk IN transfers
++ */
++ ep = &usba_ep[0];
++ usba_writel(udc, TST,
++ USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH));
++ usba_ep_writel(ep, CFG,
++ USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
++ | USBA_EPT_DIR_IN
++ | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
++ | USBA_BF(BK_NUMBER, 1));
++ if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) {
++ set_protocol_stall(udc, ep);
++ dev_err(dev, "Test_SE0_NAK: ep0 not mapped\n");
++ } else {
++ usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
++ dev_info(dev, "Entering Test_SE0_NAK mode...\n");
++ }
++ break;
++ case 0x0400:
++ /* Test_Packet */
++ ep = &usba_ep[0];
++ usba_ep_writel(ep, CFG,
++ USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
++ | USBA_EPT_DIR_IN
++ | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
++ | USBA_BF(BK_NUMBER, 1));
++ if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) {
++ set_protocol_stall(udc, ep);
++ dev_err(dev, "Test_Packet: ep0 not mapped\n");
++ } else {
++ usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
++ usba_writel(udc, TST, USBA_TST_PKT_MODE);
++ copy_to_fifo(ep->fifo, test_packet_buffer,
++ sizeof(test_packet_buffer));
++ usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
++ dev_info(dev, "Entering Test_Packet mode...\n");
++ }
++ break;
++ default:
++ dev_err(dev, "Invalid test mode: 0x%04x\n", test_mode);
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++/* Avoid overly long expressions */
++static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq)
++{
++ if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
++ return true;
++ return false;
++}
++
++static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq)
++{
++ if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_TEST_MODE))
++ return true;
++ return false;
++}
++
++static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq)
++{
++ if (crq->wValue == __constant_cpu_to_le16(USB_ENDPOINT_HALT))
++ return true;
++ return false;
++}
++
++static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
++ struct usb_ctrlrequest *crq)
++{
++ int retval = 0;;
++
++ switch (crq->bRequest) {
++ case USB_REQ_GET_STATUS: {
++ u16 status;
++
++ if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) {
++ /* Self-powered, no remote wakeup */
++ status = __constant_cpu_to_le16(1 << 0);
++ } else if (crq->bRequestType
++ == (USB_DIR_IN | USB_RECIP_INTERFACE)) {
++ status = __constant_cpu_to_le16(0);
++ } else if (crq->bRequestType
++ == (USB_DIR_IN | USB_RECIP_ENDPOINT)) {
++ struct usba_ep *target;
++
++ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
++ if (!target)
++ goto stall;
++
++ status = 0;
++ if (is_stalled(udc, target))
++ status |= __constant_cpu_to_le16(1);
++ } else
++ goto delegate;
++
++ /* Write directly to the FIFO. No queueing is done. */
++ if (crq->wLength != __constant_cpu_to_le16(sizeof(status)))
++ goto stall;
++ ep->state = DATA_STAGE_IN;
++ __raw_writew(status, ep->fifo);
++ usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
++ break;
++ }
++
++ case USB_REQ_CLEAR_FEATURE: {
++ if (crq->bRequestType == USB_RECIP_DEVICE) {
++ if (feature_is_dev_remote_wakeup(crq)) {
++ /* TODO: Handle REMOTE_WAKEUP */
++ } else {
++ /* Can't CLEAR_FEATURE TEST_MODE */
++ goto stall;
++ }
++ } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
++ struct usba_ep *target;
++
++ if (crq->wLength != __constant_cpu_to_le16(0)
++ || !feature_is_ep_halt(crq))
++ goto stall;
++ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
++ if (!target)
++ goto stall;
++
++ usba_ep_writel(target, CLR_STA, USBA_FORCE_STALL);
++ if (target->index != 0)
++ usba_ep_writel(target, CLR_STA,
++ USBA_TOGGLE_CLR);
++ } else {
++ goto delegate;
++ }
++
++ send_status(udc, ep);
++ break;
++ }
++
++ case USB_REQ_SET_FEATURE: {
++ if (crq->bRequestType == USB_RECIP_DEVICE) {
++ if (feature_is_dev_test_mode(crq)) {
++ send_status(udc, ep);
++ ep->state = STATUS_STAGE_TEST;
++ udc->test_mode = le16_to_cpu(crq->wIndex);
++ return 0;
++ } else if (feature_is_dev_remote_wakeup(crq)) {
++ /* TODO: Handle REMOTE_WAKEUP */
++ } else {
++ goto stall;
++ }
++ } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
++ struct usba_ep *target;
++
++ if (crq->wLength != __constant_cpu_to_le16(0)
++ || !feature_is_ep_halt(crq))
++ goto stall;
++
++ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
++ if (!target)
++ goto stall;
++
++ usba_ep_writel(target, SET_STA, USBA_FORCE_STALL);
++ } else
++ goto delegate;
++
++ send_status(udc, ep);
++ break;
++ }
++
++ case USB_REQ_SET_ADDRESS:
++ if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
++ goto delegate;
++
++ set_address(udc, le16_to_cpu(crq->wValue));
++ send_status(udc, ep);
++ ep->state = STATUS_STAGE_ADDR;
++ break;
++
++ default:
++delegate:
++ spin_unlock(&udc->lock);
++ retval = udc->driver->setup(&udc->gadget, crq);
++ spin_lock(&udc->lock);
++ }
++
++ return retval;
++
++stall:
++ printk(KERN_ERR
++ "udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, "
++ "halting endpoint...\n",
++ ep->ep.name, crq->bRequestType, crq->bRequest,
++ le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex),
++ le16_to_cpu(crq->wLength));
++ set_protocol_stall(udc, ep);
++ return -1;
++}
++
++static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep)
++{
++ struct usba_request *req;
++ u32 epstatus;
++ u32 epctrl;
++
++restart:
++ epstatus = usba_ep_readl(ep, STA);
++ epctrl = usba_ep_readl(ep, CTL);
++
++ DBG(DBG_INT, "%s [%d]: s/%08x c/%08x\n",
++ ep->ep.name, ep->state, epstatus, epctrl);
++
++ req = NULL;
++ if (!list_empty(&ep->queue))
++ req = list_entry(ep->queue.next,
++ struct usba_request, queue);
++
++ if ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) {
++ if (req->submitted)
++ next_fifo_transaction(ep, req);
++ else
++ submit_request(ep, req);
++
++ if (req->last_transaction) {
++ usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
++ usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
++ }
++ goto restart;
++ }
++ if ((epstatus & epctrl) & USBA_TX_COMPLETE) {
++ usba_ep_writel(ep, CLR_STA, USBA_TX_COMPLETE);
++
++ switch (ep->state) {
++ case DATA_STAGE_IN:
++ usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY);
++ usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
++ ep->state = STATUS_STAGE_OUT;
++ break;
++ case STATUS_STAGE_ADDR:
++ /* Activate our new address */
++ usba_writel(udc, CTRL, (usba_readl(udc, CTRL)
++ | USBA_FADDR_EN));
++ usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
++ ep->state = WAIT_FOR_SETUP;
++ break;
++ case STATUS_STAGE_IN:
++ if (req) {
++ list_del_init(&req->queue);
++ request_complete(ep, req, 0);
++ submit_next_request(ep);
++ }
++ usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
++ ep->state = WAIT_FOR_SETUP;
++ break;
++ case STATUS_STAGE_TEST:
++ usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
++ ep->state = WAIT_FOR_SETUP;
++ if (do_test_mode(udc))
++ set_protocol_stall(udc, ep);
++ break;
++ default:
++ printk(KERN_ERR
++ "udc: %s: TXCOMP: Invalid endpoint state %d, "
++ "halting endpoint...\n",
++ ep->ep.name, ep->state);
++ set_protocol_stall(udc, ep);
++ break;
++ }
++
++ goto restart;
++ }
++ if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
++ switch (ep->state) {
++ case STATUS_STAGE_OUT:
++ usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
++ usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
++
++ if (req) {
++ list_del_init(&req->queue);
++ request_complete(ep, req, 0);
++ }
++ ep->state = WAIT_FOR_SETUP;
++ break;
++
++ case DATA_STAGE_OUT:
++ receive_data(ep);
++ break;
++
++ default:
++ usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
++ usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
++ printk(KERN_ERR
++ "udc: %s: RXRDY: Invalid endpoint state %d, "
++ "halting endpoint...\n",
++ ep->ep.name, ep->state);
++ set_protocol_stall(udc, ep);
++ break;
++ }
++
++ goto restart;
++ }
++ if (epstatus & USBA_RX_SETUP) {
++ union {
++ struct usb_ctrlrequest crq;
++ unsigned long data[2];
++ } crq;
++ unsigned int pkt_len;
++ int ret;
++
++ if (ep->state != WAIT_FOR_SETUP) {
++ /*
++ * Didn't expect a SETUP packet at this
++ * point. Clean up any pending requests (which
++ * may be successful).
++ */
++ int status = -EPROTO;
++
++ /*
++ * RXRDY and TXCOMP are dropped when SETUP
++ * packets arrive. Just pretend we received
++ * the status packet.
++ */
++ if (ep->state == STATUS_STAGE_OUT
++ || ep->state == STATUS_STAGE_IN) {
++ usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
++ status = 0;
++ }
++
++ if (req) {
++ list_del_init(&req->queue);
++ request_complete(ep, req, status);
++ }
++ }
++
++ pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
++ DBG(DBG_HW, "Packet length: %u\n", pkt_len);
++ if (pkt_len != sizeof(crq)) {
++ printk(KERN_WARNING "udc: Invalid packet length %u "
++ "(expected %lu)\n", pkt_len, sizeof(crq));
++ set_protocol_stall(udc, ep);
++ return;
++ }
++
++ DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
++ copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
++
++ /* Free up one bank in the FIFO so that we can
++ * generate or receive a reply right away. */
++ usba_ep_writel(ep, CLR_STA, USBA_RX_SETUP);
++
++ /* printk(KERN_DEBUG "setup: %d: %02x.%02x\n",
++ ep->state, crq.crq.bRequestType,
++ crq.crq.bRequest); */
++
++ if (crq.crq.bRequestType & USB_DIR_IN) {
++ /*
++ * The USB 2.0 spec states that "if wLength is
++ * zero, there is no data transfer phase."
++ * However, testusb #14 seems to actually
++ * expect a data phase even if wLength = 0...
++ */
++ ep->state = DATA_STAGE_IN;
++ } else {
++ if (crq.crq.wLength != __constant_cpu_to_le16(0))
++ ep->state = DATA_STAGE_OUT;
++ else
++ ep->state = STATUS_STAGE_IN;
++ }
++
++ ret = -1;
++ if (ep->index == 0)
++ ret = handle_ep0_setup(udc, ep, &crq.crq);
++ else {
++ spin_unlock(&udc->lock);
++ ret = udc->driver->setup(&udc->gadget, &crq.crq);
++ spin_lock(&udc->lock);
++ }
++
++ DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n",
++ crq.crq.bRequestType, crq.crq.bRequest,
++ le16_to_cpu(crq.crq.wLength), ep->state, ret);
++
++ if (ret < 0) {
++ /* Let the host know that we failed */
++ set_protocol_stall(udc, ep);
++ }
++ }
++}
++
++static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep)
++{
++ struct usba_request *req;
++ u32 epstatus;
++ u32 epctrl;
++
++ epstatus = usba_ep_readl(ep, STA);
++ epctrl = usba_ep_readl(ep, CTL);
++
++ DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n", ep->ep.name, epstatus);
++
++ while ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) {
++ DBG(DBG_BUS, "%s: TX PK ready\n", ep->ep.name);
++
++ if (list_empty(&ep->queue)) {
++ dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n");
++ usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
++ return;
++ }
++
++ req = list_entry(ep->queue.next, struct usba_request, queue);
++
++ if (req->using_dma) {
++ /* Send a zero-length packet */
++ usba_ep_writel(ep, SET_STA,
++ USBA_TX_PK_RDY);
++ usba_ep_writel(ep, CTL_DIS,
++ USBA_TX_PK_RDY);
++ list_del_init(&req->queue);
++ submit_next_request(ep);
++ request_complete(ep, req, 0);
++ } else {
++ if (req->submitted)
++ next_fifo_transaction(ep, req);
++ else
++ submit_request(ep, req);
++
++ if (req->last_transaction) {
++ list_del_init(&req->queue);
++ submit_next_request(ep);
++ request_complete(ep, req, 0);
++ }
++ }
++
++ epstatus = usba_ep_readl(ep, STA);
++ epctrl = usba_ep_readl(ep, CTL);
++ }
++ if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
++ DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name);
++ receive_data(ep);
++ usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
++ }
++}
++
++static void usba_dma_irq(struct usba_udc *udc, struct usba_ep *ep)
++{
++ struct usba_request *req;
++ u32 status, control, pending;
++
++ status = usba_dma_readl(ep, STATUS);
++ control = usba_dma_readl(ep, CONTROL);
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
++ ep->last_dma_status = status;
++#endif
++ pending = status & control;
++ DBG(DBG_INT | DBG_DMA, "dma irq, s/%#08x, c/%#08x\n", status, control);
++
++ if (status & USBA_DMA_CH_EN) {
++ dev_err(&udc->pdev->dev,
++ "DMA_CH_EN is set after transfer is finished!\n");
++ dev_err(&udc->pdev->dev,
++ "status=%#08x, pending=%#08x, control=%#08x\n",
++ status, pending, control);
++
++ /*
++ * try to pretend nothing happened. We might have to
++ * do something here...
++ */
++ }
++
++ if (list_empty(&ep->queue))
++ /* Might happen if a reset comes along at the right moment */
++ return;
++
++ if (pending & (USBA_DMA_END_TR_ST | USBA_DMA_END_BUF_ST)) {
++ req = list_entry(ep->queue.next, struct usba_request, queue);
++ usba_update_req(ep, req, status);
++
++ list_del_init(&req->queue);
++ submit_next_request(ep);
++ request_complete(ep, req, 0);
++ }
++}
++
++static irqreturn_t usba_udc_irq(int irq, void *devid)
++{
++ struct usba_udc *udc = devid;
++ u32 status;
++ u32 dma_status;
++ u32 ep_status;
++
++ spin_lock(&udc->lock);
++
++ status = usba_readl(udc, INT_STA);
++ DBG(DBG_INT, "irq, status=%#08x\n", status);
++
++ if (status & USBA_DET_SUSPEND) {
++ usba_writel(udc, INT_CLR, USBA_DET_SUSPEND);
++ DBG(DBG_BUS, "Suspend detected\n");
++ if (udc->gadget.speed != USB_SPEED_UNKNOWN
++ && udc->driver && udc->driver->suspend) {
++ spin_unlock(&udc->lock);
++ udc->driver->suspend(&udc->gadget);
++ spin_lock(&udc->lock);
++ }
++ }
++
++ if (status & USBA_WAKE_UP) {
++ usba_writel(udc, INT_CLR, USBA_WAKE_UP);
++ DBG(DBG_BUS, "Wake Up CPU detected\n");
++ }
++
++ if (status & USBA_END_OF_RESUME) {
++ usba_writel(udc, INT_CLR, USBA_END_OF_RESUME);
++ DBG(DBG_BUS, "Resume detected\n");
++ if (udc->gadget.speed != USB_SPEED_UNKNOWN
++ && udc->driver && udc->driver->resume) {
++ spin_unlock(&udc->lock);
++ udc->driver->resume(&udc->gadget);
++ spin_lock(&udc->lock);
++ }
++ }
++
++ dma_status = USBA_BFEXT(DMA_INT, status);
++ if (dma_status) {
++ int i;
++
++ for (i = 1; i < USBA_NR_ENDPOINTS; i++)
++ if (dma_status & (1 << i))
++ usba_dma_irq(udc, &usba_ep[i]);
++ }
++
++ ep_status = USBA_BFEXT(EPT_INT, status);
++ if (ep_status) {
++ int i;
++
++ for (i = 0; i < USBA_NR_ENDPOINTS; i++)
++ if (ep_status & (1 << i)) {
++ if (ep_is_control(&usba_ep[i]))
++ usba_control_irq(udc, &usba_ep[i]);
++ else
++ usba_ep_irq(udc, &usba_ep[i]);
++ }
++ }
++
++ if (status & USBA_END_OF_RESET) {
++ struct usba_ep *ep0;
++
++ usba_writel(udc, INT_CLR, USBA_END_OF_RESET);
++ reset_all_endpoints(udc);
++
++ if (status & USBA_HIGH_SPEED) {
++ DBG(DBG_BUS, "High-speed bus reset detected\n");
++ udc->gadget.speed = USB_SPEED_HIGH;
++ } else {
++ DBG(DBG_BUS, "Full-speed bus reset detected\n");
++ udc->gadget.speed = USB_SPEED_FULL;
++ }
++
++ ep0 = &usba_ep[0];
++ ep0->desc = &usba_ep0_desc;
++ ep0->state = WAIT_FOR_SETUP;
++ usba_ep_writel(ep0, CFG,
++ (USBA_BF(EPT_SIZE, EP0_EPT_SIZE)
++ | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL)
++ | USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE)));
++ usba_ep_writel(ep0, CTL_ENB,
++ USBA_EPT_ENABLE | USBA_RX_SETUP);
++ usba_writel(udc, INT_ENB,
++ (usba_readl(udc, INT_ENB)
++ | USBA_BF(EPT_INT, 1)
++ | USBA_DET_SUSPEND
++ | USBA_END_OF_RESUME));
++
++ if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED))
++ dev_warn(&udc->pdev->dev,
++ "WARNING: EP0 configuration is invalid!\n");
++ }
++
++ spin_unlock(&udc->lock);
++
++ return IRQ_HANDLED;
++}
++
++static irqreturn_t usba_vbus_irq(int irq, void *devid)
++{
++ struct usba_udc *udc = devid;
++ int vbus;
++
++ /* debounce */
++ udelay(10);
++
++ spin_lock(&udc->lock);
++
++ /* May happen if Vbus pin toggles during probe() */
++ if (!udc->driver)
++ goto out;
++
++ vbus = gpio_get_value(udc->vbus_pin);
++ if (vbus != udc->vbus_prev) {
++ if (vbus) {
++ usba_writel(udc, CTRL, USBA_EN_USBA);
++ usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
++ } else {
++ udc->gadget.speed = USB_SPEED_UNKNOWN;
++ reset_all_endpoints(udc);
++ usba_writel(udc, CTRL, 0);
++ spin_unlock(&udc->lock);
++ udc->driver->disconnect(&udc->gadget);
++ spin_lock(&udc->lock);
++ }
++ udc->vbus_prev = vbus;
++ }
++
++out:
++ spin_unlock(&udc->lock);
++
++ return IRQ_HANDLED;
++}
++
++int usb_gadget_register_driver(struct usb_gadget_driver *driver)
++{
++ struct usba_udc *udc = &the_udc;
++ unsigned long flags;
++ int ret;
++
++ if (!udc->pdev)
++ return -ENODEV;
++
++ spin_lock_irqsave(&udc->lock, flags);
++ if (udc->driver) {
++ spin_unlock_irqrestore(&udc->lock, flags);
++ return -EBUSY;
++ }
++
++ udc->driver = driver;
++ udc->gadget.dev.driver = &driver->driver;
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ clk_enable(udc->pclk);
++ clk_enable(udc->hclk);
++
++ ret = driver->bind(&udc->gadget);
++ if (ret) {
++ DBG(DBG_ERR, "Could not bind to driver %s: error %d\n",
++ driver->driver.name, ret);
++ goto err_driver_bind;
++ }
++
++ DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name);
++
++ udc->vbus_prev = 0;
++ if (udc->vbus_pin != -1)
++ enable_irq(gpio_to_irq(udc->vbus_pin));
++
++ /* If Vbus is present, enable the controller and wait for reset */
++ spin_lock_irqsave(&udc->lock, flags);
++ if (vbus_is_present(udc) && udc->vbus_prev == 0) {
++ usba_writel(udc, CTRL, USBA_EN_USBA);
++ usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
++ }
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ return 0;
++
++err_driver_bind:
++ udc->driver = NULL;
++ udc->gadget.dev.driver = NULL;
++ return ret;
++}
++EXPORT_SYMBOL(usb_gadget_register_driver);
++
++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
++{
++ struct usba_udc *udc = &the_udc;
++ unsigned long flags;
++
++ if (!udc->pdev)
++ return -ENODEV;
++ if (driver != udc->driver)
++ return -EINVAL;
++
++ if (udc->vbus_pin != -1)
++ disable_irq(gpio_to_irq(udc->vbus_pin));
++
++ spin_lock_irqsave(&udc->lock, flags);
++ udc->gadget.speed = USB_SPEED_UNKNOWN;
++ reset_all_endpoints(udc);
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ /* This will also disable the DP pullup */
++ usba_writel(udc, CTRL, 0);
++
++ driver->unbind(&udc->gadget);
++ udc->gadget.dev.driver = NULL;
++ udc->driver = NULL;
++
++ clk_disable(udc->hclk);
++ clk_disable(udc->pclk);
++
++ DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name);
++
++ return 0;
++}
++EXPORT_SYMBOL(usb_gadget_unregister_driver);
++
++static int __init usba_udc_probe(struct platform_device *pdev)
++{
++ struct usba_platform_data *pdata = pdev->dev.platform_data;
++ struct resource *regs, *fifo;
++ struct clk *pclk, *hclk;
++ struct usba_udc *udc = &the_udc;
++ int irq, ret, i;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
++ fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
++ if (!regs || !fifo)
++ return -ENXIO;
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ pclk = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(pclk))
++ return PTR_ERR(pclk);
++ hclk = clk_get(&pdev->dev, "hclk");
++ if (IS_ERR(hclk)) {
++ ret = PTR_ERR(hclk);
++ goto err_get_hclk;
++ }
++
++ udc->pdev = pdev;
++ udc->pclk = pclk;
++ udc->hclk = hclk;
++ udc->vbus_pin = -1;
++
++ ret = -ENOMEM;
++ udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!udc->regs) {
++ dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
++ goto err_map_regs;
++ }
++ dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
++ (unsigned long)regs->start, udc->regs);
++ udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1);
++ if (!udc->fifo) {
++ dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
++ goto err_map_fifo;
++ }
++ dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
++ (unsigned long)fifo->start, udc->fifo);
++
++ device_initialize(&udc->gadget.dev);
++ udc->gadget.dev.parent = &pdev->dev;
++ udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
++
++ platform_set_drvdata(pdev, udc);
++
++ /* Make sure we start from a clean slate */
++ clk_enable(pclk);
++ usba_writel(udc, CTRL, 0);
++ clk_disable(pclk);
++
++ INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
++ usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
++ usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
++ usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
++ for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
++ struct usba_ep *ep = &usba_ep[i];
++
++ ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
++ ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
++ ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
++
++ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
++ }
++
++ ret = request_irq(irq, usba_udc_irq, 0, "atmel_usba_udc", udc);
++ if (ret) {
++ dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n",
++ irq, ret);
++ goto err_request_irq;
++ }
++ udc->irq = irq;
++
++ ret = device_add(&udc->gadget.dev);
++ if (ret) {
++ dev_dbg(&pdev->dev, "Could not add gadget: %d\n", ret);
++ goto err_device_add;
++ }
++
++ if (pdata && pdata->vbus_pin != GPIO_PIN_NONE) {
++ if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
++ udc->vbus_pin = pdata->vbus_pin;
++
++ ret = request_irq(gpio_to_irq(udc->vbus_pin),
++ usba_vbus_irq, 0,
++ "atmel_usba_udc", udc);
++ if (ret) {
++ gpio_free(udc->vbus_pin);
++ udc->vbus_pin = -1;
++ dev_warn(&udc->pdev->dev,
++ "failed to request vbus irq; "
++ "assuming always on\n");
++ } else {
++ disable_irq(gpio_to_irq(udc->vbus_pin));
++ }
++ }
++ }
++
++ usba_init_debugfs(udc);
++ for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
++ usba_ep_init_debugfs(udc, &usba_ep[i]);
++
++ return 0;
++
++err_device_add:
++ free_irq(irq, udc);
++err_request_irq:
++ iounmap(udc->fifo);
++err_map_fifo:
++ iounmap(udc->regs);
++err_map_regs:
++ clk_put(hclk);
++err_get_hclk:
++ clk_put(pclk);
++
++ platform_set_drvdata(pdev, NULL);
++
++ return ret;
++}
++
++static int __exit usba_udc_remove(struct platform_device *pdev)
++{
++ struct usba_udc *udc;
++ int i;
++
++ udc = platform_get_drvdata(pdev);
++
++ for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
++ usba_ep_cleanup_debugfs(&usba_ep[i]);
++ usba_cleanup_debugfs(udc);
++
++ if (udc->vbus_pin != -1)
++ gpio_free(udc->vbus_pin);
++
++ free_irq(udc->irq, udc);
++ iounmap(udc->fifo);
++ iounmap(udc->regs);
++ clk_put(udc->hclk);
++ clk_put(udc->pclk);
++
++ device_unregister(&udc->gadget.dev);
++
++ return 0;
++}
++
++static struct platform_driver udc_driver = {
++ .remove = __exit_p(usba_udc_remove),
++ .driver = {
++ .name = "atmel_usba_udc",
++ },
++};
++
++static int __init udc_init(void)
++{
++ return platform_driver_probe(&udc_driver, usba_udc_probe);
++}
++module_init(udc_init);
++
++static void __exit udc_exit(void)
++{
++ platform_driver_unregister(&udc_driver);
++}
++module_exit(udc_exit);
++
++MODULE_DESCRIPTION("Atmel USBA UDC driver");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
+new file mode 100644
+index 0000000..f4f0f8b
+--- /dev/null
++++ b/drivers/usb/gadget/atmel_usba_udc.h
+@@ -0,0 +1,350 @@
++/*
++ * Driver for the Atmel USBA high speed USB device controller
++ *
++ * Copyright (C) 2005-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __LINUX_USB_GADGET_USBA_UDC_H__
++#define __LINUX_USB_GADGET_USBA_UDC_H__
++
++/* USB register offsets */
++#define USBA_CTRL 0x0000
++#define USBA_FNUM 0x0004
++#define USBA_INT_ENB 0x0010
++#define USBA_INT_STA 0x0014
++#define USBA_INT_CLR 0x0018
++#define USBA_EPT_RST 0x001c
++#define USBA_TST 0x00e0
++
++/* USB endpoint register offsets */
++#define USBA_EPT_CFG 0x0000
++#define USBA_EPT_CTL_ENB 0x0004
++#define USBA_EPT_CTL_DIS 0x0008
++#define USBA_EPT_CTL 0x000c
++#define USBA_EPT_SET_STA 0x0014
++#define USBA_EPT_CLR_STA 0x0018
++#define USBA_EPT_STA 0x001c
++
++/* USB DMA register offsets */
++#define USBA_DMA_NXT_DSC 0x0000
++#define USBA_DMA_ADDRESS 0x0004
++#define USBA_DMA_CONTROL 0x0008
++#define USBA_DMA_STATUS 0x000c
++
++/* Bitfields in CTRL */
++#define USBA_DEV_ADDR_OFFSET 0
++#define USBA_DEV_ADDR_SIZE 7
++#define USBA_FADDR_EN (1 << 7)
++#define USBA_EN_USBA (1 << 8)
++#define USBA_DETACH (1 << 9)
++#define USBA_REMOTE_WAKE_UP (1 << 10)
++
++/* Bitfields in FNUM */
++#define USBA_MICRO_FRAME_NUM_OFFSET 0
++#define USBA_MICRO_FRAME_NUM_SIZE 3
++#define USBA_FRAME_NUMBER_OFFSET 3
++#define USBA_FRAME_NUMBER_SIZE 11
++#define USBA_FRAME_NUM_ERROR (1 << 31)
++
++/* Bitfields in INT_ENB/INT_STA/INT_CLR */
++#define USBA_HIGH_SPEED (1 << 0)
++#define USBA_DET_SUSPEND (1 << 1)
++#define USBA_MICRO_SOF (1 << 2)
++#define USBA_SOF (1 << 3)
++#define USBA_END_OF_RESET (1 << 4)
++#define USBA_WAKE_UP (1 << 5)
++#define USBA_END_OF_RESUME (1 << 6)
++#define USBA_UPSTREAM_RESUME (1 << 7)
++#define USBA_EPT_INT_OFFSET 8
++#define USBA_EPT_INT_SIZE 16
++#define USBA_DMA_INT_OFFSET 24
++#define USBA_DMA_INT_SIZE 8
++
++/* Bitfields in EPT_RST */
++#define USBA_RST_OFFSET 0
++#define USBA_RST_SIZE 16
++
++/* Bitfields in USBA_TST */
++#define USBA_SPEED_CFG_OFFSET 0
++#define USBA_SPEED_CFG_SIZE 2
++#define USBA_TST_J_MODE (1 << 2)
++#define USBA_TST_K_MODE (1 << 3)
++#define USBA_TST_PKT_MODE (1 << 4)
++#define USBA_OPMODE2 (1 << 5)
++
++/* Bitfields in EPT_CFG */
++#define USBA_EPT_SIZE_OFFSET 0
++#define USBA_EPT_SIZE_SIZE 3
++#define USBA_EPT_DIR_IN (1 << 3)
++#define USBA_EPT_TYPE_OFFSET 4
++#define USBA_EPT_TYPE_SIZE 2
++#define USBA_BK_NUMBER_OFFSET 6
++#define USBA_BK_NUMBER_SIZE 2
++#define USBA_NB_TRANS_OFFSET 8
++#define USBA_NB_TRANS_SIZE 2
++#define USBA_EPT_MAPPED (1 << 31)
++
++/* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
++#define USBA_EPT_ENABLE (1 << 0)
++#define USBA_AUTO_VALID (1 << 1)
++#define USBA_INTDIS_DMA (1 << 3)
++#define USBA_NYET_DIS (1 << 4)
++#define USBA_DATAX_RX (1 << 6)
++#define USBA_MDATA_RX (1 << 7)
++/* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
++#define USBA_BUSY_BANK_IE (1 << 18)
++
++/* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
++#define USBA_FORCE_STALL (1 << 5)
++#define USBA_TOGGLE_CLR (1 << 6)
++#define USBA_TOGGLE_SEQ_OFFSET 6
++#define USBA_TOGGLE_SEQ_SIZE 2
++#define USBA_ERR_OVFLW (1 << 8)
++#define USBA_RX_BK_RDY (1 << 9)
++#define USBA_KILL_BANK (1 << 9)
++#define USBA_TX_COMPLETE (1 << 10)
++#define USBA_TX_PK_RDY (1 << 11)
++#define USBA_ISO_ERR_TRANS (1 << 11)
++#define USBA_RX_SETUP (1 << 12)
++#define USBA_ISO_ERR_FLOW (1 << 12)
++#define USBA_STALL_SENT (1 << 13)
++#define USBA_ISO_ERR_CRC (1 << 13)
++#define USBA_ISO_ERR_NBTRANS (1 << 13)
++#define USBA_NAK_IN (1 << 14)
++#define USBA_ISO_ERR_FLUSH (1 << 14)
++#define USBA_NAK_OUT (1 << 15)
++#define USBA_CURRENT_BANK_OFFSET 16
++#define USBA_CURRENT_BANK_SIZE 2
++#define USBA_BUSY_BANKS_OFFSET 18
++#define USBA_BUSY_BANKS_SIZE 2
++#define USBA_BYTE_COUNT_OFFSET 20
++#define USBA_BYTE_COUNT_SIZE 11
++#define USBA_SHORT_PACKET (1 << 31)
++
++/* Bitfields in DMA_CONTROL */
++#define USBA_DMA_CH_EN (1 << 0)
++#define USBA_DMA_LINK (1 << 1)
++#define USBA_DMA_END_TR_EN (1 << 2)
++#define USBA_DMA_END_BUF_EN (1 << 3)
++#define USBA_DMA_END_TR_IE (1 << 4)
++#define USBA_DMA_END_BUF_IE (1 << 5)
++#define USBA_DMA_DESC_LOAD_IE (1 << 6)
++#define USBA_DMA_BURST_LOCK (1 << 7)
++#define USBA_DMA_BUF_LEN_OFFSET 16
++#define USBA_DMA_BUF_LEN_SIZE 16
++
++/* Bitfields in DMA_STATUS */
++#define USBA_DMA_CH_ACTIVE (1 << 1)
++#define USBA_DMA_END_TR_ST (1 << 4)
++#define USBA_DMA_END_BUF_ST (1 << 5)
++#define USBA_DMA_DESC_LOAD_ST (1 << 6)
++
++/* Constants for SPEED_CFG */
++#define USBA_SPEED_CFG_NORMAL 0
++#define USBA_SPEED_CFG_FORCE_HIGH 2
++#define USBA_SPEED_CFG_FORCE_FULL 3
++
++/* Constants for EPT_SIZE */
++#define USBA_EPT_SIZE_8 0
++#define USBA_EPT_SIZE_16 1
++#define USBA_EPT_SIZE_32 2
++#define USBA_EPT_SIZE_64 3
++#define USBA_EPT_SIZE_128 4
++#define USBA_EPT_SIZE_256 5
++#define USBA_EPT_SIZE_512 6
++#define USBA_EPT_SIZE_1024 7
++
++/* Constants for EPT_TYPE */
++#define USBA_EPT_TYPE_CONTROL 0
++#define USBA_EPT_TYPE_ISO 1
++#define USBA_EPT_TYPE_BULK 2
++#define USBA_EPT_TYPE_INT 3
++
++/* Constants for BK_NUMBER */
++#define USBA_BK_NUMBER_ZERO 0
++#define USBA_BK_NUMBER_ONE 1
++#define USBA_BK_NUMBER_DOUBLE 2
++#define USBA_BK_NUMBER_TRIPLE 3
++
++/* Bit manipulation macros */
++#define USBA_BF(name, value) \
++ (((value) & ((1 << USBA_##name##_SIZE) - 1)) \
++ << USBA_##name##_OFFSET)
++#define USBA_BFEXT(name, value) \
++ (((value) >> USBA_##name##_OFFSET) \
++ & ((1 << USBA_##name##_SIZE) - 1))
++#define USBA_BFINS(name, value, old) \
++ (((old) & ~(((1 << USBA_##name##_SIZE) - 1) \
++ << USBA_##name##_OFFSET)) \
++ | USBA_BF(name, value))
++
++/* Register access macros */
++#define usba_readl(udc, reg) \
++ __raw_readl((udc)->regs + USBA_##reg)
++#define usba_writel(udc, reg, value) \
++ __raw_writel((value), (udc)->regs + USBA_##reg)
++#define usba_ep_readl(ep, reg) \
++ __raw_readl((ep)->ep_regs + USBA_EPT_##reg)
++#define usba_ep_writel(ep, reg, value) \
++ __raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg)
++#define usba_dma_readl(ep, reg) \
++ __raw_readl((ep)->dma_regs + USBA_DMA_##reg)
++#define usba_dma_writel(ep, reg, value) \
++ __raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg)
++
++/* Calculate base address for a given endpoint or DMA controller */
++#define USBA_EPT_BASE(x) (0x100 + (x) * 0x20)
++#define USBA_DMA_BASE(x) (0x300 + (x) * 0x10)
++#define USBA_FIFO_BASE(x) ((x) << 16)
++
++/* Synth parameters */
++#define USBA_NR_ENDPOINTS 7
++
++#define EP0_FIFO_SIZE 64
++#define EP0_EPT_SIZE USBA_EPT_SIZE_64
++#define EP0_NR_BANKS 1
++
++/*
++ * REVISIT: Try to eliminate this value. Can we rely on req->mapped to
++ * provide this information?
++ */
++#define DMA_ADDR_INVALID (~(dma_addr_t)0)
++
++#define FIFO_IOMEM_ID 0
++#define CTRL_IOMEM_ID 1
++
++#ifdef DEBUG
++#define DBG_ERR 0x0001 /* report all error returns */
++#define DBG_HW 0x0002 /* debug hardware initialization */
++#define DBG_GADGET 0x0004 /* calls to/from gadget driver */
++#define DBG_INT 0x0008 /* interrupts */
++#define DBG_BUS 0x0010 /* report changes in bus state */
++#define DBG_QUEUE 0x0020 /* debug request queue processing */
++#define DBG_FIFO 0x0040 /* debug FIFO contents */
++#define DBG_DMA 0x0080 /* debug DMA handling */
++#define DBG_REQ 0x0100 /* print out queued request length */
++#define DBG_ALL 0xffff
++#define DBG_NONE 0x0000
++
++#define DEBUG_LEVEL (DBG_ERR)
++#define DBG(level, fmt, ...) \
++ do { \
++ if ((level) & DEBUG_LEVEL) \
++ printk(KERN_DEBUG "udc: " fmt, ## __VA_ARGS__); \
++ } while (0)
++#else
++#define DBG(level, fmt...)
++#endif
++
++enum usba_ctrl_state {
++ WAIT_FOR_SETUP,
++ DATA_STAGE_IN,
++ DATA_STAGE_OUT,
++ STATUS_STAGE_IN,
++ STATUS_STAGE_OUT,
++ STATUS_STAGE_ADDR,
++ STATUS_STAGE_TEST,
++};
++/*
++ EP_STATE_IDLE,
++ EP_STATE_SETUP,
++ EP_STATE_IN_DATA,
++ EP_STATE_OUT_DATA,
++ EP_STATE_SET_ADDR_STATUS,
++ EP_STATE_RX_STATUS,
++ EP_STATE_TX_STATUS,
++ EP_STATE_HALT,
++*/
++
++struct usba_dma_desc {
++ dma_addr_t next;
++ dma_addr_t addr;
++ u32 ctrl;
++};
++
++struct usba_ep {
++ int state;
++ void __iomem *ep_regs;
++ void __iomem *dma_regs;
++ void __iomem *fifo;
++ struct usb_ep ep;
++ struct usba_udc *udc;
++
++ struct list_head queue;
++ const struct usb_endpoint_descriptor *desc;
++
++ u16 fifo_size;
++ u8 nr_banks;
++ u8 index;
++ unsigned int can_dma:1;
++ unsigned int can_isoc:1;
++ unsigned int is_isoc:1;
++ unsigned int is_in:1;
++
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
++ u32 last_dma_status;
++ struct dentry *debugfs_dir;
++ struct dentry *debugfs_queue;
++ struct dentry *debugfs_dma_status;
++ struct dentry *debugfs_state;
++#endif
++};
++
++struct usba_request {
++ struct usb_request req;
++ struct list_head queue;
++
++ u32 ctrl;
++
++ unsigned int submitted:1;
++ unsigned int last_transaction:1;
++ unsigned int using_dma:1;
++ unsigned int mapped:1;
++};
++
++struct usba_udc {
++ /* Protect hw registers from concurrent modifications */
++ spinlock_t lock;
++
++ void __iomem *regs;
++ void __iomem *fifo;
++
++ struct usb_gadget gadget;
++ struct usb_gadget_driver *driver;
++ struct platform_device *pdev;
++ int irq;
++ int vbus_pin;
++ struct clk *pclk;
++ struct clk *hclk;
++
++ int test_mode;
++ int vbus_prev;
++
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
++ struct dentry *debugfs_root;
++ struct dentry *debugfs_regs;
++#endif
++};
++
++static inline struct usba_ep *to_usba_ep(struct usb_ep *ep)
++{
++ return container_of(ep, struct usba_ep, ep);
++}
++
++static inline struct usba_request *to_usba_req(struct usb_request *req)
++{
++ return container_of(req, struct usba_request, req);
++}
++
++static inline struct usba_udc *to_usba_udc(struct usb_gadget *gadget)
++{
++ return container_of(gadget, struct usba_udc, gadget);
++}
++
++#define ep_is_control(ep) ((ep)->index == 0)
++#define ep_is_idle(ep) ((ep)->state == EP_STATE_IDLE)
++
++#endif /* __LINUX_USB_GADGET_USBA_UDC_H */
+diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
+index 235b618..bb361ab 100644
+--- a/drivers/video/atmel_lcdfb.c
++++ b/drivers/video/atmel_lcdfb.c
+@@ -37,7 +37,9 @@
+ #endif
+
+ #if defined(CONFIG_ARCH_AT91)
+-#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT
++#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
++ | FBINFO_PARTIAL_PAN_OK \
++ | FBINFO_HWACCEL_YPAN)
+
+ static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
+ struct fb_var_screeninfo *var)
+@@ -74,7 +76,7 @@ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .xpanstep = 0,
+- .ypanstep = 0,
++ .ypanstep = 1,
+ .ywrapstep = 0,
+ .accel = FB_ACCEL_NONE,
+ };
+diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
+index 2580f5f..b6f936a 100644
+--- a/drivers/video/backlight/Kconfig
++++ b/drivers/video/backlight/Kconfig
+@@ -24,6 +24,18 @@ config LCD_CLASS_DEVICE
+ To have support for your specific LCD panel you will have to
+ select the proper drivers which depend on this option.
+
++config LCD_LTV350QV
++ tristate "Samsung LTV350QV LCD Panel"
++ depends on LCD_CLASS_DEVICE && SPI_MASTER
++ default n
++ help
++ If you have a Samsung LTV350QV LCD panel, say y to include a
++ power control driver for it. The panel starts up in power
++ off state, so you need this driver in order to see any
++ output.
++
++ The LTV350QV panel is present on all ATSTK1000 boards.
++
+ #
+ # Backlight
+ #
+diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
+index c6e2266..965a78b 100644
+--- a/drivers/video/backlight/Makefile
++++ b/drivers/video/backlight/Makefile
+@@ -1,6 +1,8 @@
+ # Backlight & LCD drivers
+
+ obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
++obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
++
+ obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
+ obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
+ obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
+diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c
+new file mode 100644
+index 0000000..751dc53
+--- /dev/null
++++ b/drivers/video/backlight/ltv350qv.c
+@@ -0,0 +1,339 @@
++/*
++ * Power control for Samsung LTV350QV Quarter VGA LCD Panel
++ *
++ * Copyright (C) 2006, 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/lcd.h>
++#include <linux/module.h>
++#include <linux/spi/spi.h>
++
++#include "ltv350qv.h"
++
++#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
++
++struct ltv350qv {
++ struct spi_device *spi;
++ u8 *buffer;
++ int power;
++ struct lcd_device *ld;
++};
++
++/*
++ * The power-on and power-off sequences are taken from the
++ * LTV350QV-F04 data sheet from Samsung. The register definitions are
++ * taken from the S6F2002 command list also from Samsung. Both
++ * documents are distributed with the AVR32 Linux BSP CD from Atmel.
++ *
++ * There's still some voodoo going on here, but it's a lot better than
++ * in the first incarnation of the driver where all we had was the raw
++ * numbers from the initialization sequence.
++ */
++static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val)
++{
++ struct spi_message msg;
++ struct spi_transfer index_xfer = {
++ .len = 3,
++ .cs_change = 1,
++ };
++ struct spi_transfer value_xfer = {
++ .len = 3,
++ };
++
++ spi_message_init(&msg);
++
++ /* register index */
++ lcd->buffer[0] = LTV_OPC_INDEX;
++ lcd->buffer[1] = 0x00;
++ lcd->buffer[2] = reg & 0x7f;
++ index_xfer.tx_buf = lcd->buffer;
++ spi_message_add_tail(&index_xfer, &msg);
++
++ /* register value */
++ lcd->buffer[4] = LTV_OPC_DATA;
++ lcd->buffer[5] = val >> 8;
++ lcd->buffer[6] = val;
++ value_xfer.tx_buf = lcd->buffer + 4;
++ spi_message_add_tail(&value_xfer, &msg);
++
++ return spi_sync(lcd->spi, &msg);
++}
++
++/* The comments are taken straight from the data sheet */
++static int ltv350qv_power_on(struct ltv350qv *lcd)
++{
++ int ret;
++
++ /* Power On Reset Display off State */
++ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000))
++ goto err;
++ msleep(15);
++
++ /* Power Setting Function 1 */
++ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE))
++ goto err;
++ if (ltv350qv_write_reg(lcd, LTV_PWRCTL2, LTV_VCOML_ENABLE))
++ goto err_power1;
++
++ /* Power Setting Function 2 */
++ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++ LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
++ | LTV_SUPPLY_CURRENT(5)))
++ goto err_power2;
++
++ msleep(55);
++
++ /* Instruction Setting */
++ ret = ltv350qv_write_reg(lcd, LTV_IFCTL,
++ LTV_NMD | LTV_REV | LTV_NL(0x1d));
++ ret |= ltv350qv_write_reg(lcd, LTV_DATACTL,
++ LTV_DS_SAME | LTV_CHS_480
++ | LTV_DF_RGB | LTV_RGB_BGR);
++ ret |= ltv350qv_write_reg(lcd, LTV_ENTRY_MODE,
++ LTV_VSPL_ACTIVE_LOW
++ | LTV_HSPL_ACTIVE_LOW
++ | LTV_DPL_SAMPLE_RISING
++ | LTV_EPL_ACTIVE_LOW
++ | LTV_SS_RIGHT_TO_LEFT);
++ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL1, LTV_CLW(3));
++ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
++ LTV_NW_INV_1LINE | LTV_FWI(3));
++ ret |= ltv350qv_write_reg(lcd, LTV_VBP, 0x000a);
++ ret |= ltv350qv_write_reg(lcd, LTV_HBP, 0x0021);
++ ret |= ltv350qv_write_reg(lcd, LTV_SOTCTL, LTV_SDT(3) | LTV_EQ(0));
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(0), 0x0103);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(1), 0x0301);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(2), 0x1f0f);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(3), 0x1f0f);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(4), 0x0707);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(5), 0x0307);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(6), 0x0707);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(7), 0x0000);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(8), 0x0004);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(9), 0x0000);
++ if (ret)
++ goto err_settings;
++
++ /* Wait more than 2 frames */
++ msleep(20);
++
++ /* Display On Sequence */
++ ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++ LTV_VCOM_DISABLE | LTV_VCOMOUT_ENABLE
++ | LTV_POWER_ON | LTV_DRIVE_CURRENT(5)
++ | LTV_SUPPLY_CURRENT(5));
++ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
++ LTV_NW_INV_1LINE | LTV_DSC | LTV_FWI(3));
++ if (ret)
++ goto err_disp_on;
++
++ /* Display should now be ON. Phew. */
++ return 0;
++
++err_disp_on:
++ /*
++ * Try to recover. Error handling probably isn't very useful
++ * at this point, just make a best effort to switch the panel
++ * off.
++ */
++ ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++ LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
++ | LTV_SUPPLY_CURRENT(5));
++ ltv350qv_write_reg(lcd, LTV_GATECTL2,
++ LTV_NW_INV_1LINE | LTV_FWI(3));
++err_settings:
++err_power2:
++err_power1:
++ ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
++ msleep(1);
++err:
++ ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
++ return -EIO;
++}
++
++static int ltv350qv_power_off(struct ltv350qv *lcd)
++{
++ int ret;
++
++ /* Display Off Sequence */
++ ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++ LTV_VCOM_DISABLE
++ | LTV_DRIVE_CURRENT(5)
++ | LTV_SUPPLY_CURRENT(5));
++ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
++ LTV_NW_INV_1LINE | LTV_FWI(3));
++
++ /* Power down setting 1 */
++ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
++
++ /* Wait at least 1 ms */
++ msleep(1);
++
++ /* Power down setting 2 */
++ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
++
++ /*
++ * No point in trying to recover here. If we can't switch the
++ * panel off, what are we supposed to do other than inform the
++ * user about the failure?
++ */
++ if (ret)
++ return -EIO;
++
++ /* Display power should now be OFF */
++ return 0;
++}
++
++static int ltv350qv_power(struct ltv350qv *lcd, int power)
++{
++ int ret = 0;
++
++ if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
++ ret = ltv350qv_power_on(lcd);
++ else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
++ ret = ltv350qv_power_off(lcd);
++
++ if (!ret)
++ lcd->power = power;
++
++ return ret;
++}
++
++static int ltv350qv_set_power(struct lcd_device *ld, int power)
++{
++ struct ltv350qv *lcd;
++
++ lcd = lcd_get_data(ld);
++ return ltv350qv_power(lcd, power);
++}
++
++static int ltv350qv_get_power(struct lcd_device *ld)
++{
++ struct ltv350qv *lcd;
++
++ lcd = lcd_get_data(ld);
++ return lcd->power;
++}
++
++static struct lcd_ops ltv_ops = {
++ .get_power = ltv350qv_get_power,
++ .set_power = ltv350qv_set_power,
++};
++
++static int __devinit ltv350qv_probe(struct spi_device *spi)
++{
++ struct ltv350qv *lcd;
++ struct lcd_device *ld;
++ int ret;
++
++ lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL);
++ if (!lcd)
++ return -ENOMEM;
++
++ lcd->spi = spi;
++ lcd->power = FB_BLANK_POWERDOWN;
++ lcd->buffer = kzalloc(8, GFP_KERNEL);
++
++ ld = lcd_device_register("ltv350qv", &spi->dev, lcd, &ltv_ops);
++ if (IS_ERR(ld)) {
++ ret = PTR_ERR(ld);
++ goto out_free_lcd;
++ }
++ lcd->ld = ld;
++
++ ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK);
++ if (ret)
++ goto out_unregister;
++
++ dev_set_drvdata(&spi->dev, lcd);
++
++ return 0;
++
++out_unregister:
++ lcd_device_unregister(ld);
++out_free_lcd:
++ kfree(lcd);
++ return ret;
++}
++
++static int __devexit ltv350qv_remove(struct spi_device *spi)
++{
++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++ ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++ lcd_device_unregister(lcd->ld);
++ kfree(lcd);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++static int ltv350qv_suspend(struct spi_device *spi,
++ pm_message_t state, u32 level)
++{
++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++ if (level == SUSPEND_POWER_DOWN)
++ return ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++
++ return 0;
++}
++
++static int ltv350qv_resume(struct spi_device *spi, u32 level)
++{
++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++ if (level == RESUME_POWER_ON)
++ return ltv350qv_power(lcd, FB_BLANK_UNBLANK);
++
++ return 0;
++}
++#else
++#define ltv350qv_suspend NULL
++#define ltv350qv_resume NULL
++#endif
++
++/* Power down all displays on reboot, poweroff or halt */
++static void ltv350qv_shutdown(struct spi_device *spi)
++{
++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++ ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++}
++
++static struct spi_driver ltv350qv_driver = {
++ .driver = {
++ .name = "ltv350qv",
++ .bus = &spi_bus_type,
++ .owner = THIS_MODULE,
++ },
++
++ .probe = ltv350qv_probe,
++ .remove = __devexit_p(ltv350qv_remove),
++ .shutdown = ltv350qv_shutdown,
++ .suspend = ltv350qv_suspend,
++ .resume = ltv350qv_resume,
++};
++
++static int __init ltv350qv_init(void)
++{
++ return spi_register_driver(&ltv350qv_driver);
++}
++
++static void __exit ltv350qv_exit(void)
++{
++ spi_unregister_driver(&ltv350qv_driver);
++}
++module_init(ltv350qv_init);
++module_exit(ltv350qv_exit);
++
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/video/backlight/ltv350qv.h b/drivers/video/backlight/ltv350qv.h
+new file mode 100644
+index 0000000..189112e
+--- /dev/null
++++ b/drivers/video/backlight/ltv350qv.h
+@@ -0,0 +1,95 @@
++/*
++ * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel
++ *
++ * Copyright (C) 2006, 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __LTV350QV_H
++#define __LTV350QV_H
++
++#define LTV_OPC_INDEX 0x74
++#define LTV_OPC_DATA 0x76
++
++#define LTV_ID 0x00 /* ID Read */
++#define LTV_IFCTL 0x01 /* Display Interface Control */
++#define LTV_DATACTL 0x02 /* Display Data Control */
++#define LTV_ENTRY_MODE 0x03 /* Entry Mode */
++#define LTV_GATECTL1 0x04 /* Gate Control 1 */
++#define LTV_GATECTL2 0x05 /* Gate Control 2 */
++#define LTV_VBP 0x06 /* Vertical Back Porch */
++#define LTV_HBP 0x07 /* Horizontal Back Porch */
++#define LTV_SOTCTL 0x08 /* Source Output Timing Control */
++#define LTV_PWRCTL1 0x09 /* Power Control 1 */
++#define LTV_PWRCTL2 0x0a /* Power Control 2 */
++#define LTV_GAMMA(x) (0x10 + (x)) /* Gamma control */
++
++/* Bit definitions for LTV_IFCTL */
++#define LTV_IM (1 << 15)
++#define LTV_NMD (1 << 14)
++#define LTV_SSMD (1 << 13)
++#define LTV_REV (1 << 7)
++#define LTV_NL(x) (((x) & 0x001f) << 0)
++
++/* Bit definitions for LTV_DATACTL */
++#define LTV_DS_SAME (0 << 12)
++#define LTV_DS_D_TO_S (1 << 12)
++#define LTV_DS_S_TO_D (2 << 12)
++#define LTV_CHS_384 (0 << 9)
++#define LTV_CHS_480 (1 << 9)
++#define LTV_CHS_492 (2 << 9)
++#define LTV_DF_RGB (0 << 6)
++#define LTV_DF_RGBX (1 << 6)
++#define LTV_DF_XRGB (2 << 6)
++#define LTV_RGB_RGB (0 << 2)
++#define LTV_RGB_BGR (1 << 2)
++#define LTV_RGB_GRB (2 << 2)
++#define LTV_RGB_RBG (3 << 2)
++
++/* Bit definitions for LTV_ENTRY_MODE */
++#define LTV_VSPL_ACTIVE_LOW (0 << 15)
++#define LTV_VSPL_ACTIVE_HIGH (1 << 15)
++#define LTV_HSPL_ACTIVE_LOW (0 << 14)
++#define LTV_HSPL_ACTIVE_HIGH (1 << 14)
++#define LTV_DPL_SAMPLE_RISING (0 << 13)
++#define LTV_DPL_SAMPLE_FALLING (1 << 13)
++#define LTV_EPL_ACTIVE_LOW (0 << 12)
++#define LTV_EPL_ACTIVE_HIGH (1 << 12)
++#define LTV_SS_LEFT_TO_RIGHT (0 << 8)
++#define LTV_SS_RIGHT_TO_LEFT (1 << 8)
++#define LTV_STB (1 << 1)
++
++/* Bit definitions for LTV_GATECTL1 */
++#define LTV_CLW(x) (((x) & 0x0007) << 12)
++#define LTV_GAON (1 << 5)
++#define LTV_SDR (1 << 3)
++
++/* Bit definitions for LTV_GATECTL2 */
++#define LTV_NW_INV_FRAME (0 << 14)
++#define LTV_NW_INV_1LINE (1 << 14)
++#define LTV_NW_INV_2LINE (2 << 14)
++#define LTV_DSC (1 << 12)
++#define LTV_GIF (1 << 8)
++#define LTV_FHN (1 << 7)
++#define LTV_FTI(x) (((x) & 0x0003) << 4)
++#define LTV_FWI(x) (((x) & 0x0003) << 0)
++
++/* Bit definitions for LTV_SOTCTL */
++#define LTV_SDT(x) (((x) & 0x0007) << 10)
++#define LTV_EQ(x) (((x) & 0x0007) << 2)
++
++/* Bit definitions for LTV_PWRCTL1 */
++#define LTV_VCOM_DISABLE (1 << 14)
++#define LTV_VCOMOUT_ENABLE (1 << 11)
++#define LTV_POWER_ON (1 << 9)
++#define LTV_DRIVE_CURRENT(x) (((x) & 0x0007) << 4) /* 0=off, 5=max */
++#define LTV_SUPPLY_CURRENT(x) (((x) & 0x0007) << 0) /* 0=off, 5=max */
++
++/* Bit definitions for LTV_PWRCTL2 */
++#define LTV_VCOML_ENABLE (1 << 13)
++#define LTV_VCOML_VOLTAGE(x) (((x) & 0x001f) << 8) /* 0=1V, 31=-1V */
++#define LTV_VCOMH_VOLTAGE(x) (((x) & 0x001f) << 0) /* 0=3V, 31=4.5V */
++
++#endif /* __LTV350QV_H */
+diff --git a/include/asm-avr32/arch-at32ap/at32ap7000.h b/include/asm-avr32/arch-at32ap/at32ap7000.h
+deleted file mode 100644
+index 3914d7b..0000000
+--- a/include/asm-avr32/arch-at32ap/at32ap7000.h
++++ /dev/null
+@@ -1,35 +0,0 @@
+-/*
+- * Pin definitions for AT32AP7000.
+- *
+- * Copyright (C) 2006 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-#ifndef __ASM_ARCH_AT32AP7000_H__
+-#define __ASM_ARCH_AT32AP7000_H__
+-
+-#define GPIO_PERIPH_A 0
+-#define GPIO_PERIPH_B 1
+-
+-#define NR_GPIO_CONTROLLERS 4
+-
+-/*
+- * Pin numbers identifying specific GPIO pins on the chip. They can
+- * also be converted to IRQ numbers by passing them through
+- * gpio_to_irq().
+- */
+-#define GPIO_PIOA_BASE (0)
+-#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
+-#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
+-#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
+-#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
+-
+-#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N))
+-#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N))
+-#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N))
+-#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
+-#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N))
+-
+-#endif /* __ASM_ARCH_AT32AP7000_H__ */
+diff --git a/include/asm-avr32/arch-at32ap/at32ap700x.h b/include/asm-avr32/arch-at32ap/at32ap700x.h
+new file mode 100644
+index 0000000..99684d6
+--- /dev/null
++++ b/include/asm-avr32/arch-at32ap/at32ap700x.h
+@@ -0,0 +1,35 @@
++/*
++ * Pin definitions for AT32AP7000.
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_ARCH_AT32AP700X_H__
++#define __ASM_ARCH_AT32AP700X_H__
++
++#define GPIO_PERIPH_A 0
++#define GPIO_PERIPH_B 1
++
++#define NR_GPIO_CONTROLLERS 4
++
++/*
++ * Pin numbers identifying specific GPIO pins on the chip. They can
++ * also be converted to IRQ numbers by passing them through
++ * gpio_to_irq().
++ */
++#define GPIO_PIOA_BASE (0)
++#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
++#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
++#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
++#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
++
++#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N))
++#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N))
++#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N))
++#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
++#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N))
++
++#endif /* __ASM_ARCH_AT32AP700X_H__ */
+diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
+index 0215965..7aa1c29 100644
+--- a/include/asm-avr32/arch-at32ap/board.h
++++ b/include/asm-avr32/arch-at32ap/board.h
+@@ -6,6 +6,8 @@
+
+ #include <linux/types.h>
+
++#define GPIO_PIN_NONE (-1)
++
+ /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
+ void at32_add_system_devices(void);
+
+@@ -31,11 +33,26 @@ struct spi_board_info;
+ struct platform_device *
+ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
+
++struct platform_device *at32_add_device_twi(unsigned int id);
++
+ struct atmel_lcdfb_info;
+ struct platform_device *
+ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+ unsigned long fbmem_start, unsigned long fbmem_len);
+
++struct usba_platform_data {
++ int vbus_pin;
++};
++struct platform_device *
++at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
++
++struct ide_platform_data {
++ u8 cs;
++};
++struct platform_device *
++at32_add_device_ide(unsigned int id, unsigned int extint,
++ struct ide_platform_data *data);
++
+ /* depending on what's hooked up, not all SSC pins will be used */
+ #define ATMEL_SSC_TK 0x01
+ #define ATMEL_SSC_TF 0x02
+@@ -50,4 +67,26 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+ struct platform_device *
+ at32_add_device_ssc(unsigned int id, unsigned int flags);
+
++struct platform_device *at32_add_device_twi(unsigned int id);
++
++struct mci_platform_data {
++ int detect_pin;
++ int wp_pin;
++};
++struct platform_device *
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
++struct platform_device *at32_add_device_ac97c(unsigned int id);
++struct platform_device *at32_add_device_abdac(unsigned int id);
++
++struct cf_platform_data {
++ int detect_pin;
++ int reset_pin;
++ int vcc_pin;
++ int ready_pin;
++ u8 cs;
++};
++struct platform_device *
++at32_add_device_cf(unsigned int id, unsigned int extint,
++ struct cf_platform_data *data);
++
+ #endif /* __ASM_ARCH_BOARD_H */
+diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/include/asm-avr32/arch-at32ap/cpu.h
+index a762f42..0dc2026 100644
+--- a/include/asm-avr32/arch-at32ap/cpu.h
++++ b/include/asm-avr32/arch-at32ap/cpu.h
+@@ -14,7 +14,7 @@
+ * Only AT32AP7000 is defined for now. We can identify the specific
+ * chip at runtime, but I'm not sure if it's really worth it.
+ */
+-#ifdef CONFIG_CPU_AT32AP7000
++#ifdef CONFIG_CPU_AT32AP700X
+ # define cpu_is_at32ap7000() (1)
+ #else
+ # define cpu_is_at32ap7000() (0)
+diff --git a/include/asm-avr32/arch-at32ap/io.h b/include/asm-avr32/arch-at32ap/io.h
+index ee59e40..4ec6abc 100644
+--- a/include/asm-avr32/arch-at32ap/io.h
++++ b/include/asm-avr32/arch-at32ap/io.h
+@@ -4,7 +4,7 @@
+ /* For "bizarre" halfword swapping */
+ #include <linux/byteorder/swabb.h>
+
+-#if defined(CONFIG_AP7000_32_BIT_SMC)
++#if defined(CONFIG_AP700X_32_BIT_SMC)
+ # define __swizzle_addr_b(addr) (addr ^ 3UL)
+ # define __swizzle_addr_w(addr) (addr ^ 2UL)
+ # define __swizzle_addr_l(addr) (addr)
+@@ -14,7 +14,7 @@
+ # define __mem_ioswabb(a, x) (x)
+ # define __mem_ioswabw(a, x) swab16(x)
+ # define __mem_ioswabl(a, x) swab32(x)
+-#elif defined(CONFIG_AP7000_16_BIT_SMC)
++#elif defined(CONFIG_AP700X_16_BIT_SMC)
+ # define __swizzle_addr_b(addr) (addr ^ 1UL)
+ # define __swizzle_addr_w(addr) (addr)
+ # define __swizzle_addr_l(addr) (addr)
+diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h
+index 9930871..135e034 100644
+--- a/include/asm-avr32/arch-at32ap/portmux.h
++++ b/include/asm-avr32/arch-at32ap/portmux.h
+@@ -19,10 +19,23 @@
+ #define AT32_GPIOF_OUTPUT 0x00000002 /* (OUT) Enable output driver */
+ #define AT32_GPIOF_HIGH 0x00000004 /* (OUT) Set output high */
+ #define AT32_GPIOF_DEGLITCH 0x00000008 /* (IN) Filter glitches */
++#define AT32_GPIOF_MULTIDRV 0x00000010 /* Enable multidriver option */
+
+ void at32_select_periph(unsigned int pin, unsigned int periph,
+ unsigned long flags);
+ void at32_select_gpio(unsigned int pin, unsigned long flags);
+ void at32_reserve_pin(unsigned int pin);
+
++#ifdef CONFIG_GPIO_DEV
++
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port);
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
++void at32_deselect_pins(unsigned int port, u32 pins);
++
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
++
++#endif /* CONFIG_GPIO_DEV */
++
+ #endif /* __ASM_ARCH_PORTMUX_H__ */
+diff --git a/include/asm-avr32/arch-at32ap/smc.h b/include/asm-avr32/arch-at32ap/smc.h
+index 07152b7..c98eea4 100644
+--- a/include/asm-avr32/arch-at32ap/smc.h
++++ b/include/asm-avr32/arch-at32ap/smc.h
+@@ -15,22 +15,50 @@
+ /*
+ * All timing parameters are in nanoseconds.
+ */
++struct smc_timing {
++ /* Delay from address valid to assertion of given strobe */
++ int ncs_read_setup;
++ int nrd_setup;
++ int ncs_write_setup;
++ int nwe_setup;
++
++ /* Pulse length of given strobe */
++ int ncs_read_pulse;
++ int nrd_pulse;
++ int ncs_write_pulse;
++ int nwe_pulse;
++
++ /* Total cycle length of given operation */
++ int read_cycle;
++ int write_cycle;
++
++ /* Minimal recovery times, will extend cycle if needed */
++ int ncs_read_recover;
++ int nrd_recover;
++ int ncs_write_recover;
++ int nwe_recover;
++};
++
++/*
++ * All timing parameters are in clock cycles.
++ */
+ struct smc_config {
++
+ /* Delay from address valid to assertion of given strobe */
+- u16 ncs_read_setup;
+- u16 nrd_setup;
+- u16 ncs_write_setup;
+- u16 nwe_setup;
++ u8 ncs_read_setup;
++ u8 nrd_setup;
++ u8 ncs_write_setup;
++ u8 nwe_setup;
+
+ /* Pulse length of given strobe */
+- u16 ncs_read_pulse;
+- u16 nrd_pulse;
+- u16 ncs_write_pulse;
+- u16 nwe_pulse;
++ u8 ncs_read_pulse;
++ u8 nrd_pulse;
++ u8 ncs_write_pulse;
++ u8 nwe_pulse;
+
+ /* Total cycle length of given operation */
+- u16 read_cycle;
+- u16 write_cycle;
++ u8 read_cycle;
++ u8 write_cycle;
+
+ /* Bus width in bytes */
+ u8 bus_width;
+@@ -76,6 +104,9 @@ struct smc_config {
+ unsigned int tdf_mode:1;
+ };
+
++extern void smc_set_timing(struct smc_config *config,
++ const struct smc_timing *timing);
++
+ extern int smc_set_configuration(int cs, const struct smc_config *config);
+ extern struct smc_config *smc_get_configuration(int cs);
+
+diff --git a/include/asm-avr32/dma-controller.h b/include/asm-avr32/dma-controller.h
+new file mode 100644
+index 0000000..56a4965
+--- /dev/null
++++ b/include/asm-avr32/dma-controller.h
+@@ -0,0 +1,166 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_AVR32_DMA_CONTROLLER_H
++#define __ASM_AVR32_DMA_CONTROLLER_H
++
++#include <linux/device.h>
++
++#define DMA_DIR_MEM_TO_MEM 0x0000
++#define DMA_DIR_MEM_TO_PERIPH 0x0001
++#define DMA_DIR_PERIPH_TO_MEM 0x0002
++#define DMA_DIR_PERIPH_TO_PERIPH 0x0003
++
++#define DMA_WIDTH_8BIT 0
++#define DMA_WIDTH_16BIT 1
++#define DMA_WIDTH_32BIT 2
++
++struct dma_request {
++ struct dma_controller *dmac;
++ struct list_head list;
++
++ unsigned short channel;
++
++ void (*xfer_complete)(struct dma_request *req);
++ void (*block_complete)(struct dma_request *req);
++ void (*error)(struct dma_request *req);
++};
++
++struct dma_request_sg {
++ struct dma_request req;
++
++ int nr_sg;
++ struct scatterlist *sg;
++ unsigned long block_size;
++ unsigned int nr_blocks;
++
++ dma_addr_t data_reg;
++ unsigned short periph_id;
++
++ unsigned char direction;
++ unsigned char width;
++};
++#define to_dma_request_sg(_req) \
++ container_of(_req, struct dma_request_sg, req)
++
++struct dma_request_cyclic {
++ struct dma_request req;
++
++ int periods;
++ unsigned long buffer_size;
++
++ dma_addr_t buffer_start;
++ dma_addr_t data_reg;
++
++ unsigned short periph_id;
++ unsigned char direction;
++ unsigned char width;
++
++ void *dev_id;
++};
++#define to_dma_request_cyclic(_req) \
++ container_of(_req, struct dma_request_cyclic, req)
++
++struct dma_request_memcpy {
++ struct dma_request req;
++
++ dma_addr_t src_addr;
++ unsigned int src_width;
++ unsigned int src_stride;
++
++ dma_addr_t dst_addr;
++ unsigned int dst_width;
++ unsigned int dst_stride;
++
++ size_t length;
++
++ unsigned short src_reverse:1;
++ unsigned short dst_reverse:1;
++};
++#define to_dma_request_memcpy(_req) \
++ container_of(_req, struct dma_request_memcpy, req)
++
++struct dma_controller {
++ struct list_head list;
++ int id;
++ struct device *dev;
++
++ int (*alloc_channel)(struct dma_controller *dmac);
++ void (*release_channel)(struct dma_controller *dmac,
++ int channel);
++ int (*prepare_request_sg)(struct dma_controller *dmac,
++ struct dma_request_sg *req);
++ int (*prepare_request_cyclic)(struct dma_controller *dmac,
++ struct dma_request_cyclic *req);
++ int (*prepare_request_memcpy)(struct dma_controller *dmac,
++ struct dma_request_memcpy *req);
++ int (*start_request)(struct dma_controller *dmac,
++ unsigned int channel);
++ int (*stop_request)(struct dma_controller *dmac,
++ unsigned int channel);
++ dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
++ unsigned int channel);
++};
++
++static inline int
++dma_alloc_channel(struct dma_controller *dmac)
++{
++ return dmac->alloc_channel(dmac);
++}
++
++static inline void
++dma_release_channel(struct dma_controller *dmac, int chan)
++{
++ dmac->release_channel(dmac, chan);
++}
++
++static inline int
++dma_prepare_request_sg(struct dma_controller *dmac,
++ struct dma_request_sg *req)
++{
++ return dmac->prepare_request_sg(dmac, req);
++}
++
++static inline int
++dma_prepare_request_cyclic(struct dma_controller *dmac,
++ struct dma_request_cyclic *req)
++{
++ return dmac->prepare_request_cyclic(dmac, req);
++}
++
++static inline int
++dma_prepare_request_memcpy(struct dma_controller *dmac,
++ struct dma_request_memcpy *req)
++{
++ return dmac->prepare_request_memcpy(dmac, req);
++}
++
++static inline int
++dma_start_request(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->start_request(dmac, channel);
++}
++
++static inline int
++dma_stop_request(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->stop_request(dmac, channel);
++}
++
++static inline dma_addr_t
++dma_get_current_pos(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->get_current_pos(dmac, channel);
++}
++
++extern int register_dma_controller(struct dma_controller *dmac);
++extern struct dma_controller *find_dma_controller(int id);
++
++#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
+diff --git a/include/asm-avr32/dma-mapping.h b/include/asm-avr32/dma-mapping.h
+index 21bb60b..81e3426 100644
+--- a/include/asm-avr32/dma-mapping.h
++++ b/include/asm-avr32/dma-mapping.h
+@@ -264,7 +264,11 @@ static inline void
+ dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ size_t size, enum dma_data_direction direction)
+ {
+- dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
++ /*
++ * No need to do anything since the CPU isn't supposed to
++ * touch this memory after we flushed it at mapping- or
++ * sync-for-device time.
++ */
+ }
+
+ static inline void
+@@ -309,12 +313,11 @@ static inline void
+ dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction direction)
+ {
+- int i;
+-
+- for (i = 0; i < nents; i++) {
+- dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
+- sg[i].length, direction);
+- }
++ /*
++ * No need to do anything since the CPU isn't supposed to
++ * touch this memory after we flushed it at mapping- or
++ * sync-for-device time.
++ */
+ }
+
+ static inline void
+diff --git a/include/asm-avr32/system.h b/include/asm-avr32/system.h
+index a8236ba..dc2d527 100644
+--- a/include/asm-avr32/system.h
++++ b/include/asm-avr32/system.h
+@@ -73,11 +73,16 @@ extern struct task_struct *__switch_to(struct task_struct *,
+
+ extern void __xchg_called_with_bad_pointer(void);
+
+-#ifdef __CHECKER__
+-extern unsigned long __builtin_xchg(void *ptr, unsigned long x);
+-#endif
++static inline unsigned long xchg_u32(u32 val, volatile u32 *m)
++{
++ u32 ret;
+
+-#define xchg_u32(val, m) __builtin_xchg((void *)m, val)
++ asm volatile("xchg %[ret], %[m], %[val]"
++ : [ret] "=&r"(ret), "=m"(*m)
++ : "m"(*m), [m] "r"(m), [val] "r"(val)
++ : "memory");
++ return ret;
++}
+
+ static inline unsigned long __xchg(unsigned long x,
+ volatile void *ptr,
+diff --git a/include/asm-avr32/unistd.h b/include/asm-avr32/unistd.h
+index 3b4e35b..de09009 100644
+--- a/include/asm-avr32/unistd.h
++++ b/include/asm-avr32/unistd.h
+@@ -303,6 +303,19 @@
+ #ifdef __KERNEL__
+ #define NR_syscalls 282
+
++/* Old stuff */
++#define __IGNORE_uselib
++#define __IGNORE_mmap
++
++/* NUMA stuff */
++#define __IGNORE_mbind
++#define __IGNORE_get_mempolicy
++#define __IGNORE_set_mempolicy
++#define __IGNORE_migrate_pages
++#define __IGNORE_move_pages
++
++/* SMP stuff */
++#define __IGNORE_getcpu
+
+ #define __ARCH_WANT_IPC_PARSE_VERSION
+ #define __ARCH_WANT_STAT64
+diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
+new file mode 100644
+index 0000000..0602339
+--- /dev/null
++++ b/include/linux/atmel-ssc.h
+@@ -0,0 +1,312 @@
++#ifndef __INCLUDE_ATMEL_SSC_H
++#define __INCLUDE_ATMEL_SSC_H
++
++#include <linux/platform_device.h>
++#include <linux/list.h>
++
++struct ssc_device {
++ struct list_head list;
++ void __iomem *regs;
++ struct platform_device *pdev;
++ struct clk *clk;
++ int user;
++ int irq;
++};
++
++struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
++void ssc_free(struct ssc_device *ssc);
++
++/* SSC register offsets */
++
++/* SSC Control Register */
++#define SSC_CR 0x00000000
++#define SSC_CR_RXDIS_SIZE 1
++#define SSC_CR_RXDIS_OFFSET 1
++#define SSC_CR_RXEN_SIZE 1
++#define SSC_CR_RXEN_OFFSET 0
++#define SSC_CR_SWRST_SIZE 1
++#define SSC_CR_SWRST_OFFSET 15
++#define SSC_CR_TXDIS_SIZE 1
++#define SSC_CR_TXDIS_OFFSET 9
++#define SSC_CR_TXEN_SIZE 1
++#define SSC_CR_TXEN_OFFSET 8
++
++/* SSC Clock Mode Register */
++#define SSC_CMR 0x00000004
++#define SSC_CMR_DIV_SIZE 12
++#define SSC_CMR_DIV_OFFSET 0
++
++/* SSC Receive Clock Mode Register */
++#define SSC_RCMR 0x00000010
++#define SSC_RCMR_CKG_SIZE 2
++#define SSC_RCMR_CKG_OFFSET 6
++#define SSC_RCMR_CKI_SIZE 1
++#define SSC_RCMR_CKI_OFFSET 5
++#define SSC_RCMR_CKO_SIZE 3
++#define SSC_RCMR_CKO_OFFSET 2
++#define SSC_RCMR_CKS_SIZE 2
++#define SSC_RCMR_CKS_OFFSET 0
++#define SSC_RCMR_PERIOD_SIZE 8
++#define SSC_RCMR_PERIOD_OFFSET 24
++#define SSC_RCMR_START_SIZE 4
++#define SSC_RCMR_START_OFFSET 8
++#define SSC_RCMR_STOP_SIZE 1
++#define SSC_RCMR_STOP_OFFSET 12
++#define SSC_RCMR_STTDLY_SIZE 8
++#define SSC_RCMR_STTDLY_OFFSET 16
++
++/* SSC Receive Frame Mode Register */
++#define SSC_RFMR 0x00000014
++#define SSC_RFMR_DATLEN_SIZE 5
++#define SSC_RFMR_DATLEN_OFFSET 0
++#define SSC_RFMR_DATNB_SIZE 4
++#define SSC_RFMR_DATNB_OFFSET 8
++#define SSC_RFMR_FSEDGE_SIZE 1
++#define SSC_RFMR_FSEDGE_OFFSET 24
++#define SSC_RFMR_FSLEN_SIZE 4
++#define SSC_RFMR_FSLEN_OFFSET 16
++#define SSC_RFMR_FSOS_SIZE 4
++#define SSC_RFMR_FSOS_OFFSET 20
++#define SSC_RFMR_LOOP_SIZE 1
++#define SSC_RFMR_LOOP_OFFSET 5
++#define SSC_RFMR_MSBF_SIZE 1
++#define SSC_RFMR_MSBF_OFFSET 7
++
++/* SSC Transmit Clock Mode Register */
++#define SSC_TCMR 0x00000018
++#define SSC_TCMR_CKG_SIZE 2
++#define SSC_TCMR_CKG_OFFSET 6
++#define SSC_TCMR_CKI_SIZE 1
++#define SSC_TCMR_CKI_OFFSET 5
++#define SSC_TCMR_CKO_SIZE 3
++#define SSC_TCMR_CKO_OFFSET 2
++#define SSC_TCMR_CKS_SIZE 2
++#define SSC_TCMR_CKS_OFFSET 0
++#define SSC_TCMR_PERIOD_SIZE 8
++#define SSC_TCMR_PERIOD_OFFSET 24
++#define SSC_TCMR_START_SIZE 4
++#define SSC_TCMR_START_OFFSET 8
++#define SSC_TCMR_STTDLY_SIZE 8
++#define SSC_TCMR_STTDLY_OFFSET 16
++
++/* SSC Transmit Frame Mode Register */
++#define SSC_TFMR 0x0000001c
++#define SSC_TFMR_DATDEF_SIZE 1
++#define SSC_TFMR_DATDEF_OFFSET 5
++#define SSC_TFMR_DATLEN_SIZE 5
++#define SSC_TFMR_DATLEN_OFFSET 0
++#define SSC_TFMR_DATNB_SIZE 4
++#define SSC_TFMR_DATNB_OFFSET 8
++#define SSC_TFMR_FSDEN_SIZE 1
++#define SSC_TFMR_FSDEN_OFFSET 23
++#define SSC_TFMR_FSEDGE_SIZE 1
++#define SSC_TFMR_FSEDGE_OFFSET 24
++#define SSC_TFMR_FSLEN_SIZE 4
++#define SSC_TFMR_FSLEN_OFFSET 16
++#define SSC_TFMR_FSOS_SIZE 3
++#define SSC_TFMR_FSOS_OFFSET 20
++#define SSC_TFMR_MSBF_SIZE 1
++#define SSC_TFMR_MSBF_OFFSET 7
++
++/* SSC Receive Hold Register */
++#define SSC_RHR 0x00000020
++#define SSC_RHR_RDAT_SIZE 32
++#define SSC_RHR_RDAT_OFFSET 0
++
++/* SSC Transmit Hold Register */
++#define SSC_THR 0x00000024
++#define SSC_THR_TDAT_SIZE 32
++#define SSC_THR_TDAT_OFFSET 0
++
++/* SSC Receive Sync. Holding Register */
++#define SSC_RSHR 0x00000030
++#define SSC_RSHR_RSDAT_SIZE 16
++#define SSC_RSHR_RSDAT_OFFSET 0
++
++/* SSC Transmit Sync. Holding Register */
++#define SSC_TSHR 0x00000034
++#define SSC_TSHR_TSDAT_SIZE 16
++#define SSC_TSHR_RSDAT_OFFSET 0
++
++/* SSC Receive Compare 0 Register */
++#define SSC_RC0R 0x00000038
++#define SSC_RC0R_CP0_SIZE 16
++#define SSC_RC0R_CP0_OFFSET 0
++
++/* SSC Receive Compare 1 Register */
++#define SSC_RC1R 0x0000003c
++#define SSC_RC1R_CP1_SIZE 16
++#define SSC_RC1R_CP1_OFFSET 0
++
++/* SSC Status Register */
++#define SSC_SR 0x00000040
++#define SSC_SR_CP0_SIZE 1
++#define SSC_SR_CP0_OFFSET 8
++#define SSC_SR_CP1_SIZE 1
++#define SSC_SR_CP1_OFFSET 9
++#define SSC_SR_ENDRX_SIZE 1
++#define SSC_SR_ENDRX_OFFSET 6
++#define SSC_SR_ENDTX_SIZE 1
++#define SSC_SR_ENDTX_OFFSET 2
++#define SSC_SR_OVRUN_SIZE 1
++#define SSC_SR_OVRUN_OFFSET 5
++#define SSC_SR_RXBUFF_SIZE 1
++#define SSC_SR_RXBUFF_OFFSET 7
++#define SSC_SR_RXEN_SIZE 1
++#define SSC_SR_RXEN_OFFSET 17
++#define SSC_SR_RXRDY_SIZE 1
++#define SSC_SR_RXRDY_OFFSET 4
++#define SSC_SR_RXSYN_SIZE 1
++#define SSC_SR_RXSYN_OFFSET 11
++#define SSC_SR_TXBUFE_SIZE 1
++#define SSC_SR_TXBUFE_OFFSET 3
++#define SSC_SR_TXEMPTY_SIZE 1
++#define SSC_SR_TXEMPTY_OFFSET 1
++#define SSC_SR_TXEN_SIZE 1
++#define SSC_SR_TXEN_OFFSET 16
++#define SSC_SR_TXRDY_SIZE 1
++#define SSC_SR_TXRDY_OFFSET 0
++#define SSC_SR_TXSYN_SIZE 1
++#define SSC_SR_TXSYN_OFFSET 10
++
++/* SSC Interrupt Enable Register */
++#define SSC_IER 0x00000044
++#define SSC_IER_CP0_SIZE 1
++#define SSC_IER_CP0_OFFSET 8
++#define SSC_IER_CP1_SIZE 1
++#define SSC_IER_CP1_OFFSET 9
++#define SSC_IER_ENDRX_SIZE 1
++#define SSC_IER_ENDRX_OFFSET 6
++#define SSC_IER_ENDTX_SIZE 1
++#define SSC_IER_ENDTX_OFFSET 2
++#define SSC_IER_OVRUN_SIZE 1
++#define SSC_IER_OVRUN_OFFSET 5
++#define SSC_IER_RXBUFF_SIZE 1
++#define SSC_IER_RXBUFF_OFFSET 7
++#define SSC_IER_RXRDY_SIZE 1
++#define SSC_IER_RXRDY_OFFSET 4
++#define SSC_IER_RXSYN_SIZE 1
++#define SSC_IER_RXSYN_OFFSET 11
++#define SSC_IER_TXBUFE_SIZE 1
++#define SSC_IER_TXBUFE_OFFSET 3
++#define SSC_IER_TXEMPTY_SIZE 1
++#define SSC_IER_TXEMPTY_OFFSET 1
++#define SSC_IER_TXRDY_SIZE 1
++#define SSC_IER_TXRDY_OFFSET 0
++#define SSC_IER_TXSYN_SIZE 1
++#define SSC_IER_TXSYN_OFFSET 10
++
++/* SSC Interrupt Disable Register */
++#define SSC_IDR 0x00000048
++#define SSC_IDR_CP0_SIZE 1
++#define SSC_IDR_CP0_OFFSET 8
++#define SSC_IDR_CP1_SIZE 1
++#define SSC_IDR_CP1_OFFSET 9
++#define SSC_IDR_ENDRX_SIZE 1
++#define SSC_IDR_ENDRX_OFFSET 6
++#define SSC_IDR_ENDTX_SIZE 1
++#define SSC_IDR_ENDTX_OFFSET 2
++#define SSC_IDR_OVRUN_SIZE 1
++#define SSC_IDR_OVRUN_OFFSET 5
++#define SSC_IDR_RXBUFF_SIZE 1
++#define SSC_IDR_RXBUFF_OFFSET 7
++#define SSC_IDR_RXRDY_SIZE 1
++#define SSC_IDR_RXRDY_OFFSET 4
++#define SSC_IDR_RXSYN_SIZE 1
++#define SSC_IDR_RXSYN_OFFSET 11
++#define SSC_IDR_TXBUFE_SIZE 1
++#define SSC_IDR_TXBUFE_OFFSET 3
++#define SSC_IDR_TXEMPTY_SIZE 1
++#define SSC_IDR_TXEMPTY_OFFSET 1
++#define SSC_IDR_TXRDY_SIZE 1
++#define SSC_IDR_TXRDY_OFFSET 0
++#define SSC_IDR_TXSYN_SIZE 1
++#define SSC_IDR_TXSYN_OFFSET 10
++
++/* SSC Interrupt Mask Register */
++#define SSC_IMR 0x0000004c
++#define SSC_IMR_CP0_SIZE 1
++#define SSC_IMR_CP0_OFFSET 8
++#define SSC_IMR_CP1_SIZE 1
++#define SSC_IMR_CP1_OFFSET 9
++#define SSC_IMR_ENDRX_SIZE 1
++#define SSC_IMR_ENDRX_OFFSET 6
++#define SSC_IMR_ENDTX_SIZE 1
++#define SSC_IMR_ENDTX_OFFSET 2
++#define SSC_IMR_OVRUN_SIZE 1
++#define SSC_IMR_OVRUN_OFFSET 5
++#define SSC_IMR_RXBUFF_SIZE 1
++#define SSC_IMR_RXBUFF_OFFSET 7
++#define SSC_IMR_RXRDY_SIZE 1
++#define SSC_IMR_RXRDY_OFFSET 4
++#define SSC_IMR_RXSYN_SIZE 1
++#define SSC_IMR_RXSYN_OFFSET 11
++#define SSC_IMR_TXBUFE_SIZE 1
++#define SSC_IMR_TXBUFE_OFFSET 3
++#define SSC_IMR_TXEMPTY_SIZE 1
++#define SSC_IMR_TXEMPTY_OFFSET 1
++#define SSC_IMR_TXRDY_SIZE 1
++#define SSC_IMR_TXRDY_OFFSET 0
++#define SSC_IMR_TXSYN_SIZE 1
++#define SSC_IMR_TXSYN_OFFSET 10
++
++/* SSC PDC Receive Pointer Register */
++#define SSC_PDC_RPR 0x00000100
++
++/* SSC PDC Receive Counter Register */
++#define SSC_PDC_RCR 0x00000104
++
++/* SSC PDC Transmit Pointer Register */
++#define SSC_PDC_TPR 0x00000108
++
++/* SSC PDC Receive Next Pointer Register */
++#define SSC_PDC_RNPR 0x00000110
++
++/* SSC PDC Receive Next Counter Register */
++#define SSC_PDC_RNCR 0x00000114
++
++/* SSC PDC Transmit Counter Register */
++#define SSC_PDC_TCR 0x0000010c
++
++/* SSC PDC Transmit Next Pointer Register */
++#define SSC_PDC_TNPR 0x00000118
++
++/* SSC PDC Transmit Next Counter Register */
++#define SSC_PDC_TNCR 0x0000011c
++
++/* SSC PDC Transfer Control Register */
++#define SSC_PDC_PTCR 0x00000120
++#define SSC_PDC_PTCR_RXTDIS_SIZE 1
++#define SSC_PDC_PTCR_RXTDIS_OFFSET 1
++#define SSC_PDC_PTCR_RXTEN_SIZE 1
++#define SSC_PDC_PTCR_RXTEN_OFFSET 0
++#define SSC_PDC_PTCR_TXTDIS_SIZE 1
++#define SSC_PDC_PTCR_TXTDIS_OFFSET 9
++#define SSC_PDC_PTCR_TXTEN_SIZE 1
++#define SSC_PDC_PTCR_TXTEN_OFFSET 8
++
++/* SSC PDC Transfer Status Register */
++#define SSC_PDC_PTSR 0x00000124
++#define SSC_PDC_PTSR_RXTEN_SIZE 1
++#define SSC_PDC_PTSR_RXTEN_OFFSET 0
++#define SSC_PDC_PTSR_TXTEN_SIZE 1
++#define SSC_PDC_PTSR_TXTEN_OFFSET 8
++
++/* Bit manipulation macros */
++#define SSC_BIT(name) \
++ (1 << SSC_##name##_OFFSET)
++#define SSC_BF(name, value) \
++ (((value) & ((1 << SSC_##name##_SIZE) - 1)) \
++ << SSC_##name##_OFFSET)
++#define SSC_BFEXT(name, value) \
++ (((value) >> SSC_##name##_OFFSET) \
++ & ((1 << SSC_##name##_SIZE) - 1))
++#define SSC_BFINS(name, value, old) \
++ (((old) & ~(((1 << SSC_##name##_SIZE) - 1) \
++ << SSC_##name##_OFFSET)) | SSC_BF(name, value))
++
++/* Register access macros */
++#define ssc_readl(base, reg) __raw_readl(base + SSC_##reg)
++#define ssc_writel(base, reg, value) __raw_writel((value), base + SSC_##reg)
++
++#endif /* __INCLUDE_ATMEL_SSC_H */
+diff --git a/include/linux/spi/at73c213.h b/include/linux/spi/at73c213.h
+new file mode 100644
+index 0000000..0f20a70
+--- /dev/null
++++ b/include/linux/spi/at73c213.h
+@@ -0,0 +1,25 @@
++/*
++ * Board-specific data used to set up AT73c213 audio DAC driver.
++ */
++
++#ifndef __LINUX_SPI_AT73C213_H
++#define __LINUX_SPI_AT73C213_H
++
++/**
++ * at73c213_board_info - how the external DAC is wired to the device.
++ *
++ * @ssc_id: SSC platform_driver id the DAC shall use to stream the audio.
++ * @dac_clk: the external clock used to provide master clock to the DAC.
++ * @shortname: a short discription for the DAC, seen by userspace tools.
++ *
++ * This struct contains the configuration of the hardware connection to the
++ * external DAC. The DAC needs a master clock and a I2S audio stream. It also
++ * provides a name which is used to identify it in userspace tools.
++ */
++struct at73c213_board_info {
++ int ssc_id;
++ struct clk *dac_clk;
++ char shortname[32];
++};
++
++#endif /* __LINUX_SPI_AT73C213_H */
+diff --git a/include/pcmcia/cs_types.h b/include/pcmcia/cs_types.h
+index c1d1629..5f38803 100644
+--- a/include/pcmcia/cs_types.h
++++ b/include/pcmcia/cs_types.h
+@@ -21,7 +21,7 @@
+ #include <sys/types.h>
+ #endif
+
+-#if defined(__arm__) || defined(__mips__)
++#if defined(__arm__) || defined(__mips__) || defined(__avr32__)
+ /* This (ioaddr_t) is exposed to userspace & hence cannot be changed. */
+ typedef u_int ioaddr_t;
+ #else
+diff --git a/init/do_mounts.c b/init/do_mounts.c
+index 4efa1e5..0e88ed1 100644
+--- a/init/do_mounts.c
++++ b/init/do_mounts.c
+@@ -219,8 +219,14 @@ __setup("root=", root_dev_setup);
+
+ static int __init rootwait_setup(char *str)
+ {
+- if (*str)
++ if (*str && *str != '=')
+ return 0;
++
++ if (*str)
++ printk(KERN_WARNING
++ "WARNING: \"rootwait=1\" is deprecated, "
++ "use \"rootwait\" instead.\n");
++
+ root_wait = 1;
+ return 1;
+ }
+diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
+index f7844f6..6631586 100755
+--- a/scripts/checkstack.pl
++++ b/scripts/checkstack.pl
+@@ -12,6 +12,7 @@
+ # sh64 port by Paul Mundt
+ # Random bits by Matt Mackall <mpm@selenic.com>
+ # M68k port by Geert Uytterhoeven and Andreas Schwab
++# AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
+ #
+ # Usage:
+ # objdump -d vmlinux | stackcheck.pl [arch]
+@@ -37,6 +38,10 @@ my (@stack, $re, $x, $xs);
+ if ($arch eq 'arm') {
+ #c0008ffc: e24dd064 sub sp, sp, #100 ; 0x64
+ $re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
++ } elsif ($arch eq 'avr32') {
++ #8000008a: 20 1d sub sp,4
++ #80000ca8: fa cd 05 b0 sub sp,sp,1456
++ $re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
+ } elsif ($arch =~ /^i[3456]86$/) {
+ #c0105234: 81 ec ac 05 00 00 sub $0x5ac,%esp
+ $re = qr/^.*[as][du][db] \$(0x$x{1,8}),\%esp$/o;
+diff --git a/sound/Kconfig b/sound/Kconfig
+index e48b9b3..29a9979 100644
+--- a/sound/Kconfig
++++ b/sound/Kconfig
+@@ -63,6 +63,12 @@ source "sound/aoa/Kconfig"
+
+ source "sound/arm/Kconfig"
+
++source "sound/avr32/Kconfig"
++
++if SPI
++source "sound/spi/Kconfig"
++endif
++
+ source "sound/mips/Kconfig"
+
+ source "sound/sh/Kconfig"
+diff --git a/sound/Makefile b/sound/Makefile
+index 3ead922..e655df7 100644
+--- a/sound/Makefile
++++ b/sound/Makefile
+@@ -5,7 +5,8 @@ obj-$(CONFIG_SOUND) += soundcore.o
+ obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o
+ obj-$(CONFIG_SOUND_PRIME) += oss/
+ obj-$(CONFIG_DMASOUND) += oss/
+-obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/ soc/
++obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ avr32/ sh/ synth/ usb/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/
++
+ obj-$(CONFIG_SND_AOA) += aoa/
+
+ # This one must be compilable even if sound is configured out
+diff --git a/sound/avr32/Kconfig b/sound/avr32/Kconfig
+new file mode 100644
+index 0000000..17d1d91
+--- /dev/null
++++ b/sound/avr32/Kconfig
+@@ -0,0 +1,11 @@
++menu "AVR32 devices"
++ depends on SND != n && AVR32
++
++config SND_ATMEL_AC97
++ tristate "Atmel AC97 Controller Driver"
++ select SND_PCM
++ select SND_AC97_CODEC
++ help
++ ALSA sound driver for the Atmel AC97 controller.
++
++endmenu
+diff --git a/sound/avr32/Makefile b/sound/avr32/Makefile
+new file mode 100644
+index 0000000..5d87d0e
+--- /dev/null
++++ b/sound/avr32/Makefile
+@@ -0,0 +1,3 @@
++snd-atmel-ac97-objs := ac97c.o
++
++obj-$(CONFIG_SND_ATMEL_AC97) += snd-atmel-ac97.o
+diff --git a/sound/avr32/ac97c.c b/sound/avr32/ac97c.c
+new file mode 100644
+index 0000000..0ec0b1c
+--- /dev/null
++++ b/sound/avr32/ac97c.c
+@@ -0,0 +1,914 @@
++/*
++ * Driver for the Atmel AC97 controller
++ *
++ * Copyright (C) 2005-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/mutex.h>
++#include <linux/io.h>
++
++#include <sound/driver.h>
++#include <sound/core.h>
++#include <sound/initval.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/ac97_codec.h>
++#include <sound/memalloc.h>
++
++#include <asm/dma-controller.h>
++
++#include "ac97c.h"
++
++/* Serialize access to opened */
++static DEFINE_MUTEX(opened_mutex);
++
++struct atmel_ac97_dma_info {
++ struct dma_request_cyclic req_tx;
++ struct dma_request_cyclic req_rx;
++ unsigned short rx_periph_id;
++ unsigned short tx_periph_id;
++};
++
++struct atmel_ac97 {
++ /* Serialize access to opened */
++ spinlock_t lock;
++ void __iomem *regs;
++ struct snd_pcm_substream *playback_substream;
++ struct snd_pcm_substream *capture_substream;
++ struct snd_card *card;
++ struct snd_pcm *pcm;
++ struct snd_ac97 *ac97;
++ struct snd_ac97_bus *ac97_bus;
++ int opened;
++ int period;
++ u64 cur_format;
++ unsigned int cur_rate;
++ struct clk *mck;
++ struct platform_device *pdev;
++ struct atmel_ac97_dma_info dma;
++};
++
++#define get_chip(card) ((struct atmel_ac97 *)(card)->private_data)
++
++#define ac97c_writel(chip, reg, val) \
++ __raw_writel((val), (chip)->regs + AC97C_##reg)
++#define ac97c_readl(chip, reg) \
++ __raw_readl((chip)->regs + AC97C_##reg)
++
++/*
++ * PCM part
++ */
++static struct snd_pcm_hardware snd_atmel_ac97_playback_hw = {
++ .info = (SNDRV_PCM_INFO_INTERLEAVED
++ | SNDRV_PCM_INFO_MMAP
++ | SNDRV_PCM_INFO_MMAP_VALID
++ | SNDRV_PCM_INFO_BLOCK_TRANSFER
++ | SNDRV_PCM_INFO_JOINT_DUPLEX),
++ .formats = (SNDRV_PCM_FMTBIT_S16_BE
++ | SNDRV_PCM_FMTBIT_S16_LE),
++ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
++ .rate_min = 4000,
++ .rate_max = 48000,
++ .channels_min = 1,
++ .channels_max = 6,
++ .buffer_bytes_max = 64*1024,
++ .period_bytes_min = 512,
++ .period_bytes_max = 4095,
++ .periods_min = 8,
++ .periods_max = 1024,
++};
++
++static struct snd_pcm_hardware snd_atmel_ac97_capture_hw = {
++ .info = (SNDRV_PCM_INFO_INTERLEAVED
++ | SNDRV_PCM_INFO_MMAP
++ | SNDRV_PCM_INFO_MMAP_VALID
++ | SNDRV_PCM_INFO_BLOCK_TRANSFER
++ | SNDRV_PCM_INFO_JOINT_DUPLEX),
++ .formats = (SNDRV_PCM_FMTBIT_S16_BE
++ | SNDRV_PCM_FMTBIT_S16_LE),
++ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
++ .rate_min = 4000,
++ .rate_max = 48000,
++ .channels_min = 1,
++ .channels_max = 2,
++ .buffer_bytes_max = 64*1024,
++ .period_bytes_min = 512,
++ .period_bytes_max = 4095,
++ .periods_min = 8,
++ .periods_max = 1024,
++};
++
++/*
++ * PCM functions
++ */
++static int
++snd_atmel_ac97_playback_open(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++
++ mutex_lock(&opened_mutex);
++ chip->opened++;
++ runtime->hw = snd_atmel_ac97_playback_hw;
++ if (chip->cur_rate) {
++ runtime->hw.rate_min = chip->cur_rate;
++ runtime->hw.rate_max = chip->cur_rate;
++ }
++ if (chip->cur_format)
++ runtime->hw.formats = (1ULL << chip->cur_format);
++ mutex_unlock(&opened_mutex);
++ chip->playback_substream = substream;
++ chip->period = 0;
++ return 0;
++}
++
++static int
++snd_atmel_ac97_capture_open(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++
++ mutex_lock(&opened_mutex);
++ chip->opened++;
++ runtime->hw = snd_atmel_ac97_capture_hw;
++ if (chip->cur_rate) {
++ runtime->hw.rate_min = chip->cur_rate;
++ runtime->hw.rate_max = chip->cur_rate;
++ }
++ if (chip->cur_format)
++ runtime->hw.formats = (1ULL << chip->cur_format);
++ mutex_unlock(&opened_mutex);
++ chip->capture_substream = substream;
++ chip->period = 0;
++ return 0;
++}
++
++static int snd_atmel_ac97_playback_close(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ mutex_lock(&opened_mutex);
++ chip->opened--;
++ if (!chip->opened) {
++ chip->cur_rate = 0;
++ chip->cur_format = 0;
++ }
++ mutex_unlock(&opened_mutex);
++ return 0;
++}
++
++static int snd_atmel_ac97_capture_close(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ mutex_lock(&opened_mutex);
++ chip->opened--;
++ if (!chip->opened) {
++ chip->cur_rate = 0;
++ chip->cur_format = 0;
++ }
++ mutex_unlock(&opened_mutex);
++ return 0;
++}
++
++static int
++snd_atmel_ac97_playback_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *hw_params)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ int err;
++
++ err = snd_pcm_lib_malloc_pages(substream,
++ params_buffer_bytes(hw_params));
++ if (err < 0)
++ return err;
++
++ /* Set restrictions to params */
++ mutex_lock(&opened_mutex);
++ chip->cur_rate = params_rate(hw_params);
++ chip->cur_format = params_format(hw_params);
++ mutex_unlock(&opened_mutex);
++
++ return 0;
++}
++
++static int
++snd_atmel_ac97_capture_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *hw_params)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ int err;
++
++ err = snd_pcm_lib_malloc_pages(substream,
++ params_buffer_bytes(hw_params));
++ if (err < 0)
++ return err;
++
++ /* Set restrictions to params */
++ mutex_lock(&opened_mutex);
++ chip->cur_rate = params_rate(hw_params);
++ chip->cur_format = params_format(hw_params);
++ mutex_unlock(&opened_mutex);
++
++ return 0;
++}
++
++static int snd_atmel_ac97_playback_hw_free(struct snd_pcm_substream *substream)
++{
++ return snd_pcm_lib_free_pages(substream);
++}
++
++static int snd_atmel_ac97_capture_hw_free(struct snd_pcm_substream *substream)
++{
++
++ return snd_pcm_lib_free_pages(substream);
++}
++
++static int snd_atmel_ac97_playback_prepare(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct platform_device *pdev = chip->pdev;
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ int block_size = frames_to_bytes(runtime, runtime->period_size);
++ unsigned long word = 0;
++ unsigned long buffer_size = 0;
++
++ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
++ block_size * 2, DMA_TO_DEVICE);
++
++ /* Assign slots to channels */
++ switch (substream->runtime->channels) {
++ case 1:
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
++ break;
++ case 2:
++ /* Assign Left and Right slot to Channel A */
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
++ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
++ break;
++ default:
++ /* TODO: support more than two channels */
++ return -EINVAL;
++ break;
++ }
++ ac97c_writel(chip, OCA, word);
++
++ /* Configure sample format and size */
++ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
++
++ switch (runtime->format) {
++ case SNDRV_PCM_FORMAT_S16_LE:
++ word |= AC97C_CMR_CEM_LITTLE;
++ break;
++ case SNDRV_PCM_FORMAT_S16_BE: /* fall through */
++ default:
++ word &= ~AC97C_CMR_CEM_LITTLE;
++ break;
++ }
++
++ ac97c_writel(chip, CAMR, word);
++
++ /* Set variable rate if needed */
++ if (runtime->rate != 48000) {
++ word = ac97c_readl(chip, MR);
++ word |= AC97C_MR_VRA;
++ ac97c_writel(chip, MR, word);
++ } else {
++ /* Clear Variable Rate Bit */
++ word = ac97c_readl(chip, MR);
++ word &= ~AC97C_MR_VRA;
++ ac97c_writel(chip, MR, word);
++ }
++
++ /* Set rate */
++ snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
++
++ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
++ runtime->periods;
++
++ chip->dma.req_tx.buffer_size = buffer_size;
++ chip->dma.req_tx.periods = runtime->periods;
++
++ BUG_ON(chip->dma.req_tx.buffer_size !=
++ (chip->dma.req_tx.periods *
++ frames_to_bytes(runtime, runtime->period_size)));
++
++ chip->dma.req_tx.buffer_start = runtime->dma_addr;
++ chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
++ chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
++ chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
++ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_tx.dev_id = chip;
++
++ return 0;
++}
++
++static int snd_atmel_ac97_capture_prepare(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct platform_device *pdev = chip->pdev;
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ int block_size = frames_to_bytes(runtime, runtime->period_size);
++ unsigned long word = 0;
++ unsigned long buffer_size = 0;
++
++ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
++ block_size * 2, DMA_FROM_DEVICE);
++
++ /* Assign slots to channels */
++ switch (substream->runtime->channels) {
++ case 1:
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
++ break;
++ case 2:
++ /* Assign Left and Right slot to Channel A */
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
++ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
++ break;
++ default:
++ /* TODO: support more than two channels */
++ return -EINVAL;
++ break;
++ }
++ ac97c_writel(chip, ICA, word);
++
++ /* Configure sample format and size */
++ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
++
++ switch (runtime->format) {
++ case SNDRV_PCM_FORMAT_S16_LE:
++ word |= AC97C_CMR_CEM_LITTLE;
++ break;
++ case SNDRV_PCM_FORMAT_S16_BE:
++ default:
++ word &= ~(AC97C_CMR_CEM_LITTLE);
++ break;
++ }
++
++ ac97c_writel(chip, CAMR, word);
++
++ /* Set variable rate if needed */
++ if (runtime->rate != 48000) {
++ word = ac97c_readl(chip, MR);
++ word |= AC97C_MR_VRA;
++ ac97c_writel(chip, MR, word);
++ } else {
++ /* Clear Variable Rate Bit */
++ word = ac97c_readl(chip, MR);
++ word &= ~(AC97C_MR_VRA);
++ ac97c_writel(chip, MR, word);
++ }
++
++ /* Set rate */
++ snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
++
++ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
++ runtime->periods;
++
++ chip->dma.req_rx.buffer_size = buffer_size;
++ chip->dma.req_rx.periods = runtime->periods;
++
++ BUG_ON(chip->dma.req_rx.buffer_size !=
++ (chip->dma.req_rx.periods *
++ frames_to_bytes(runtime, runtime->period_size)));
++
++ chip->dma.req_rx.buffer_start = runtime->dma_addr;
++ chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
++ chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
++ chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
++ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_rx.dev_id = chip;
++
++ return 0;
++}
++
++ static int
++snd_atmel_ac97_playback_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ unsigned long camr;
++ int flags, err = 0;
++
++ spin_lock_irqsave(&chip->lock, flags);
++ camr = ac97c_readl(chip, CAMR);
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
++ &chip->dma.req_tx);
++ dma_start_request(chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel);
++ camr |= AC97C_CMR_CENA;
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ err = dma_stop_request(chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel);
++ if (chip->opened <= 1)
++ camr &= ~AC97C_CMR_CENA;
++ break;
++ default:
++ err = -EINVAL;
++ break;
++ }
++
++ ac97c_writel(chip, CAMR, camr);
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++ return err;
++}
++
++ static int
++snd_atmel_ac97_capture_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ unsigned long camr;
++ int flags, err = 0;
++
++ spin_lock_irqsave(&chip->lock, flags);
++ camr = ac97c_readl(chip, CAMR);
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
++ &chip->dma.req_rx);
++ dma_start_request(chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel);
++ camr |= AC97C_CMR_CENA;
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ err = dma_stop_request(chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel);
++ mutex_lock(&opened_mutex);
++ if (chip->opened <= 1)
++ camr &= ~AC97C_CMR_CENA;
++ mutex_unlock(&opened_mutex);
++ break;
++ default:
++ err = -EINVAL;
++ break;
++ }
++
++ ac97c_writel(chip, CAMR, camr);
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++ return err;
++}
++
++ static snd_pcm_uframes_t
++snd_atmel_ac97_playback_pointer(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ snd_pcm_uframes_t pos;
++ unsigned long bytes;
++
++ bytes = (dma_get_current_pos
++ (chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel) - runtime->dma_addr);
++ pos = bytes_to_frames(runtime, bytes);
++ if (pos >= runtime->buffer_size)
++ pos -= runtime->buffer_size;
++
++ return pos;
++}
++
++ static snd_pcm_uframes_t
++snd_atmel_ac97_capture_pointer(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ snd_pcm_uframes_t pos;
++ unsigned long bytes;
++
++ bytes = (dma_get_current_pos
++ (chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel)
++ - runtime->dma_addr);
++ pos = bytes_to_frames(runtime, bytes);
++ if (pos >= runtime->buffer_size)
++ pos -= runtime->buffer_size;
++
++
++ return pos;
++}
++
++static struct snd_pcm_ops atmel_ac97_playback_ops = {
++ .open = snd_atmel_ac97_playback_open,
++ .close = snd_atmel_ac97_playback_close,
++ .ioctl = snd_pcm_lib_ioctl,
++ .hw_params = snd_atmel_ac97_playback_hw_params,
++ .hw_free = snd_atmel_ac97_playback_hw_free,
++ .prepare = snd_atmel_ac97_playback_prepare,
++ .trigger = snd_atmel_ac97_playback_trigger,
++ .pointer = snd_atmel_ac97_playback_pointer,
++};
++
++static struct snd_pcm_ops atmel_ac97_capture_ops = {
++ .open = snd_atmel_ac97_capture_open,
++ .close = snd_atmel_ac97_capture_close,
++ .ioctl = snd_pcm_lib_ioctl,
++ .hw_params = snd_atmel_ac97_capture_hw_params,
++ .hw_free = snd_atmel_ac97_capture_hw_free,
++ .prepare = snd_atmel_ac97_capture_prepare,
++ .trigger = snd_atmel_ac97_capture_trigger,
++ .pointer = snd_atmel_ac97_capture_pointer,
++};
++
++static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
++ /* Playback */
++ {
++ .exclusive = 1,
++ .r = { {
++ .slots = ((1 << AC97_SLOT_PCM_LEFT)
++ | (1 << AC97_SLOT_PCM_RIGHT)
++ | (1 << AC97_SLOT_PCM_CENTER)
++ | (1 << AC97_SLOT_PCM_SLEFT)
++ | (1 << AC97_SLOT_PCM_SRIGHT)
++ | (1 << AC97_SLOT_LFE)),
++ } }
++ },
++ /* PCM in */
++ {
++ .stream = 1,
++ .exclusive = 1,
++ .r = { {
++ .slots = ((1 << AC97_SLOT_PCM_LEFT)
++ | (1 << AC97_SLOT_PCM_RIGHT)),
++ } }
++ },
++ /* Mic in */
++ {
++ .stream = 1,
++ .exclusive = 1,
++ .r = { {
++ .slots = (1<<AC97_SLOT_MIC),
++ } }
++ },
++};
++
++static int __devinit snd_atmel_ac97_pcm_new(struct atmel_ac97 *chip)
++{
++ struct snd_pcm *pcm;
++ int err;
++
++ err = snd_ac97_pcm_assign(chip->ac97_bus,
++ ARRAY_SIZE(atmel_ac97_pcm_defs),
++ atmel_ac97_pcm_defs);
++ if (err)
++ return err;
++
++ err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
++ if (err)
++ return err;
++
++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
++ &atmel_ac97_playback_ops);
++
++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
++ &atmel_ac97_capture_ops);
++
++ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
++ &chip->pdev->dev,
++ 128 * 1024, 128 * 1024);
++
++ pcm->private_data = chip;
++ pcm->info_flags = 0;
++ strcpy(pcm->name, "Atmel-AC97");
++ chip->pcm = pcm;
++
++ return 0;
++}
++
++/*
++ * Mixer part.
++ */
++static int snd_atmel_ac97_mixer_new(struct atmel_ac97 *chip)
++{
++ int err;
++ struct snd_ac97_template template;
++
++ memset(&template, 0, sizeof(template));
++ template.private_data = chip;
++ err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
++
++ return err;
++}
++
++static void atmel_ac97_error(struct dma_request *_req)
++{
++ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
++ struct atmel_ac97 *chip = req->dev_id;
++
++ dev_dbg(&chip->pdev->dev, "DMA Controller error, channel %d\n",
++ req->req.channel);
++}
++
++static void atmel_ac97_block_complete(struct dma_request *_req)
++{
++ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
++ struct atmel_ac97 *chip = req->dev_id;
++ if (req->periph_id == chip->dma.tx_periph_id)
++ snd_pcm_period_elapsed(chip->playback_substream);
++ else
++ snd_pcm_period_elapsed(chip->capture_substream);
++}
++
++/*
++ * Codec part.
++ */
++static void snd_atmel_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
++ unsigned short val)
++{
++ struct atmel_ac97 *chip = get_chip(ac97);
++ unsigned long word;
++ int timeout = 40;
++
++ word = (reg & 0x7f) << 16 | val;
++
++ do {
++ if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
++ ac97c_writel(chip, COTHR, word);
++ return;
++ }
++ udelay(1);
++ } while (--timeout);
++
++ dev_dbg(&chip->pdev->dev, "codec write timeout\n");
++}
++
++static unsigned short snd_atmel_ac97_read(struct snd_ac97 *ac97,
++ unsigned short reg)
++{
++ struct atmel_ac97 *chip = get_chip(ac97);
++ unsigned long word;
++ int timeout = 40;
++ int write = 10;
++
++ word = (0x80 | (reg & 0x7f)) << 16;
++
++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
++ ac97c_readl(chip, CORHR);
++
++retry_write:
++ timeout = 40;
++
++ do {
++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
++ ac97c_writel(chip, COTHR, word);
++ goto read_reg;
++ }
++ mdelay(10);
++ } while (--timeout);
++
++ if (!--write)
++ goto timed_out;
++ goto retry_write;
++
++read_reg:
++ do {
++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0) {
++ unsigned short val = ac97c_readl(chip, CORHR);
++ return val;
++ }
++ mdelay(10);
++ } while (--timeout);
++
++ if (!--write)
++ goto timed_out;
++ goto retry_write;
++
++timed_out:
++ dev_dbg(&chip->pdev->dev, "codec read timeout\n");
++ return 0xffff;
++}
++
++static void snd_atmel_ac97_reset(struct atmel_ac97 *chip)
++{
++ ac97c_writel(chip, MR, AC97C_MR_WRST);
++ mdelay(1);
++ ac97c_writel(chip, MR, AC97C_MR_ENA);
++}
++
++static void snd_atmel_ac97_destroy(struct snd_card *card)
++{
++ struct atmel_ac97 *chip = get_chip(card);
++
++ if (chip->regs)
++ iounmap(chip->regs);
++
++ if (chip->mck) {
++ clk_disable(chip->mck);
++ clk_put(chip->mck);
++ }
++
++ if (chip->dma.req_tx.req.dmac) {
++ dma_release_channel(chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel);
++ }
++ if (chip->dma.req_rx.req.dmac) {
++ dma_release_channel(chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel);
++ }
++}
++
++static int __devinit snd_atmel_ac97_create(struct snd_card *card,
++ struct platform_device *pdev)
++{
++ static struct snd_ac97_bus_ops ops = {
++ .write = snd_atmel_ac97_write,
++ .read = snd_atmel_ac97_read,
++ };
++ struct atmel_ac97 *chip = get_chip(card);
++ struct resource *regs;
++ struct clk *mck;
++ int err;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++
++ mck = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(mck))
++ return PTR_ERR(mck);
++ clk_enable(mck);
++ chip->mck = mck;
++
++ card->private_free = snd_atmel_ac97_destroy;
++
++ spin_lock_init(&chip->lock);
++ chip->card = card;
++ chip->pdev = pdev;
++
++ chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!chip->regs)
++ return -ENOMEM;
++
++ snd_card_set_dev(card, &pdev->dev);
++
++ err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
++
++ return err;
++}
++
++static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
++{
++ static int dev;
++ struct snd_card *card;
++ struct atmel_ac97 *chip;
++ int err;
++ int ch;
++
++ mutex_init(&opened_mutex);
++
++ err = -ENOMEM;
++ card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
++ THIS_MODULE, sizeof(struct atmel_ac97));
++ if (!card)
++ goto out;
++ chip = get_chip(card);
++
++ err = snd_atmel_ac97_create(card, pdev);
++ if (err)
++ goto out_free_card;
++
++ snd_atmel_ac97_reset(chip);
++
++ err = snd_atmel_ac97_mixer_new(chip);
++ if (err)
++ goto out_free_card;
++
++ err = snd_atmel_ac97_pcm_new(chip);
++ if (err)
++ goto out_free_card;
++
++ /* TODO: Get this information from the platform device */
++ chip->dma.req_tx.req.dmac = find_dma_controller(0);
++ if (!chip->dma.req_tx.req.dmac) {
++ dev_dbg(&chip->pdev->dev, "DMA controller for TX missing\n");
++ err = -ENODEV;
++ goto out_free_card;
++ }
++ chip->dma.req_rx.req.dmac = find_dma_controller(0);
++ if (!chip->dma.req_rx.req.dmac) {
++ dev_dbg(&chip->pdev->dev, "DMA controller for RX missing\n");
++ err = -ENODEV;
++ goto out_free_card;
++ }
++
++ chip->dma.rx_periph_id = 3;
++ chip->dma.tx_periph_id = 4;
++
++ ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
++ if (ch < 0) {
++ dev_dbg(&chip->pdev->dev,
++ "could not allocate TX DMA channel\n");
++ err = ch;
++ goto out_free_card;
++ }
++ chip->dma.req_tx.req.channel = ch;
++ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
++ chip->dma.req_tx.req.error = atmel_ac97_error;
++
++ ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
++ if (ch < 0) {
++ dev_dbg(&chip->pdev->dev,
++ "could not allocate RX DMA channel\n");
++ err = ch;
++ goto out_free_card;
++ }
++ chip->dma.req_rx.req.channel = ch;
++ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
++ chip->dma.req_rx.req.error = atmel_ac97_error;
++
++ strcpy(card->driver, "atmel_ac97c");
++ strcpy(card->shortname, "atmel_ac97c");
++ sprintf(card->longname, "Atmel AVR32 AC97 controller");
++
++ err = snd_card_register(card);
++ if (err)
++ goto out_free_card;
++
++ platform_set_drvdata(pdev, card);
++ dev++;
++
++ dev_info(&pdev->dev, "Atmel AVR32 AC97 controller at 0x%p\n",
++ chip->regs);
++
++ return 0;
++
++out_free_card:
++ snd_card_free(card);
++out:
++ return err;
++}
++
++#ifdef CONFIG_PM
++ static int
++snd_atmel_ac97_suspend(struct platform_device *pdev, pm_message_t msg)
++{
++ struct snd_card *card = platform_get_drvdata(pdev);
++ struct atmel_ac97 *chip = card->private_data;
++
++ clk_disable(chip->mck);
++
++ return 0;
++}
++
++static int snd_atmel_ac97_resume(struct platform_device *pdev)
++{
++ struct snd_card *card = dev_get_drvdata(pdev);
++ struct atmel_ac97 *chip = card->private_data;
++
++ clk_enable(chip->mck);
++
++ return 0;
++}
++#else
++#define snd_atmel_ac97_suspend NULL
++#define snd_atmel_ac97_resume NULL
++#endif
++
++static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
++{
++ struct snd_card *card = platform_get_drvdata(pdev);
++
++ snd_card_free(card);
++ platform_set_drvdata(pdev, NULL);
++ return 0;
++}
++
++static struct platform_driver atmel_ac97_driver = {
++ .remove = __devexit_p(snd_atmel_ac97_remove),
++ .driver = {
++ .name = "atmel_ac97c",
++ },
++ .suspend = snd_atmel_ac97_suspend,
++ .resume = snd_atmel_ac97_resume,
++};
++
++static int __init atmel_ac97_init(void)
++{
++ return platform_driver_probe(&atmel_ac97_driver,
++ snd_atmel_ac97_probe);
++}
++module_init(atmel_ac97_init);
++
++static void __exit atmel_ac97_exit(void)
++{
++ platform_driver_unregister(&atmel_ac97_driver);
++}
++module_exit(atmel_ac97_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+diff --git a/sound/avr32/ac97c.h b/sound/avr32/ac97c.h
+new file mode 100644
+index 0000000..96246e7
+--- /dev/null
++++ b/sound/avr32/ac97c.h
+@@ -0,0 +1,71 @@
++/*
++ * Register definitions for the Atmel AC97 Controller.
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __SOUND_AVR32_AC97C_H
++#define __SOUND_AVR32_AC97C_H
++
++#define AC97C_MR 0x08
++#define AC97C_ICA 0x10
++#define AC97C_OCA 0x14
++#define AC97C_CARHR 0x20
++#define AC97C_CATHR 0x24
++#define AC97C_CASR 0x28
++#define AC97C_CAMR 0x2c
++#define AC97C_CBRHR 0x30
++#define AC97C_CBTHR 0x34
++#define AC97C_CBSR 0x38
++#define AC97C_CBMR 0x3c
++#define AC97C_CORHR 0x40
++#define AC97C_COTHR 0x44
++#define AC97C_COSR 0x48
++#define AC97C_COMR 0x4c
++#define AC97C_SR 0x50
++#define AC97C_IER 0x54
++#define AC97C_IDR 0x58
++#define AC97C_IMR 0x5c
++#define AC97C_VERSION 0xfc
++
++#define AC97C_CATPR PDC_TPR
++#define AC97C_CATCR PDC_TCR
++#define AC97C_CATNPR PDC_TNPR
++#define AC97C_CATNCR PDC_TNCR
++#define AC97C_CARPR PDC_RPR
++#define AC97C_CARCR PDC_RCR
++#define AC97C_CARNPR PDC_RNPR
++#define AC97C_CARNCR PDC_RNCR
++#define AC97C_PTCR PDC_PTCR
++
++#define AC97C_MR_ENA (1 << 0)
++#define AC97C_MR_WRST (1 << 1)
++#define AC97C_MR_VRA (1 << 2)
++
++#define AC97C_CSR_TXRDY (1 << 0)
++#define AC97C_CSR_UNRUN (1 << 2)
++#define AC97C_CSR_RXRDY (1 << 4)
++#define AC97C_CSR_ENDTX (1 << 10)
++#define AC97C_CSR_ENDRX (1 << 14)
++
++#define AC97C_CMR_SIZE_20 (0 << 16)
++#define AC97C_CMR_SIZE_18 (1 << 16)
++#define AC97C_CMR_SIZE_16 (2 << 16)
++#define AC97C_CMR_SIZE_10 (3 << 16)
++#define AC97C_CMR_CEM_LITTLE (1 << 18)
++#define AC97C_CMR_CEM_BIG (0 << 18)
++#define AC97C_CMR_CENA (1 << 21)
++#define AC97C_CMR_PDCEN (1 << 22)
++
++#define AC97C_SR_CAEVT (1 << 3)
++
++#define AC97C_CH_ASSIGN(slot, channel) \
++ (AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
++#define AC97C_CHANNEL_NONE 0x0
++#define AC97C_CHANNEL_A 0x1
++#define AC97C_CHANNEL_B 0x2
++
++#endif /* __SOUND_AVR32_AC97C_H */
+diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
+index af37cd0..e3cc557 100644
+--- a/sound/oss/Kconfig
++++ b/sound/oss/Kconfig
+@@ -654,3 +654,7 @@ config SOUND_SH_DAC_AUDIO_CHANNEL
+ int "DAC channel"
+ default "1"
+ depends on SOUND_SH_DAC_AUDIO
++
++config SOUND_AT32_ABDAC
++ tristate "Atmel AT32 Audio Bitstream DAC (ABDAC) support"
++ depends on SOUND_PRIME && AVR32
+diff --git a/sound/oss/Makefile b/sound/oss/Makefile
+index 1200670..fafc246 100644
+--- a/sound/oss/Makefile
++++ b/sound/oss/Makefile
+@@ -10,6 +10,7 @@ obj-$(CONFIG_SOUND_CS4232) += cs4232.o ad1848.o
+
+ # Please leave it as is, cause the link order is significant !
+
++obj-$(CONFIG_SOUND_AT32_ABDAC) += at32_abdac.o
+ obj-$(CONFIG_SOUND_SH_DAC_AUDIO) += sh_dac_audio.o
+ obj-$(CONFIG_SOUND_HAL2) += hal2.o
+ obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o
+diff --git a/sound/oss/at32_abdac.c b/sound/oss/at32_abdac.c
+new file mode 100644
+index 0000000..cb997d7
+--- /dev/null
++++ b/sound/oss/at32_abdac.c
+@@ -0,0 +1,722 @@
++/*
++ * OSS Sound Driver for the Atmel AT32 on-chip DAC.
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/dma-mapping.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/sound.h>
++#include <linux/soundcard.h>
++
++#include <asm/byteorder.h>
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
++
++/* We want to use the "bizarre" swap-bytes-in-each-halfword macro */
++#include <linux/byteorder/swabb.h>
++
++#include "at32_abdac.h"
++
++#define DMA_BUFFER_SIZE 32768
++#define DMA_PERIOD_SHIFT 10
++#define DMA_PERIOD_SIZE (1 << DMA_PERIOD_SHIFT)
++#define DMA_WRITE_THRESHOLD DMA_PERIOD_SIZE
++
++struct sound_settings {
++ unsigned int format;
++ unsigned int channels;
++ unsigned int sample_rate;
++ /* log2(bytes per sample) */
++ unsigned int input_order;
++};
++
++struct at32_dac {
++ spinlock_t lock;
++ void __iomem *regs;
++
++ /* head and tail refer to number of words */
++ struct {
++ u32 *buf;
++ int head;
++ int tail;
++ } dma;
++
++ struct semaphore sem;
++ wait_queue_head_t write_wait;
++
++ /*
++ * Read at most ucount bytes from ubuf, translate to 2-channel
++ * signed 16-bit big endian format and write to the DMA buffer
++ * as long as there is room left. Return the number of bytes
++ * successfully copied from ubuf, or -EFAULT if the first
++ * sample from ubuf couldn't be read. This function is not
++ * called unless there is room for at least one sample (4
++ * bytes) in the DMA buffer.
++ */
++ ssize_t (*trans)(struct at32_dac *dac, const char __user *ubuf,
++ size_t ucount);
++
++ struct sound_settings dsp_settings;
++ struct dma_request_cyclic req;
++
++ struct clk *mck;
++ struct clk *sample_clk;
++ struct platform_device *pdev;
++ int busy;
++ int playing;
++ int dev_dsp;
++};
++static struct at32_dac *the_dac;
++
++static inline unsigned int abdac_get_head(struct at32_dac *dac)
++{
++ return dac->dma.head & ((DMA_BUFFER_SIZE / 4) - 1);
++}
++
++static inline unsigned int abdac_get_tail(struct at32_dac *dac)
++{
++ return dac->dma.tail & ((DMA_BUFFER_SIZE / 4) - 1);
++}
++
++static inline unsigned int abdac_dma_space(struct at32_dac *dac)
++{
++ unsigned int space;
++
++ space = ((dac->dma.tail - dac->dma.head - 1)
++ & ((DMA_BUFFER_SIZE / 4) - 1));
++ return space;
++}
++
++static void abdac_update_dma_tail(struct at32_dac *dac)
++{
++ dma_addr_t dma_addr;
++ unsigned int new_tail;
++
++ if (dac->playing) {
++ dma_addr = dma_get_current_pos(dac->req.req.dmac,
++ dac->req.req.channel);
++ new_tail = (dma_addr - dac->req.buffer_start) / 4;
++ if (new_tail >= dac->dma.head
++ && (dac->dma.tail < dac->dma.head
++ || dac->dma.tail > new_tail))
++ dev_notice(&dac->pdev->dev, "DMA underrun detected!\n");
++ dac->dma.tail = new_tail;
++ dev_dbg(&dac->pdev->dev, "update tail: 0x%x - 0x%x = %u\n",
++ dma_addr, dac->req.buffer_start, dac->dma.tail);
++ }
++}
++
++static int abdac_start(struct at32_dac *dac)
++{
++ int ret;
++
++ if (dac->playing)
++ return 0;
++
++ memset(dac->dma.buf, 0, DMA_BUFFER_SIZE);
++
++ clk_enable(dac->sample_clk);
++
++ ret = dma_prepare_request_cyclic(dac->req.req.dmac, &dac->req);
++ if (ret)
++ goto out_stop_clock;
++
++ dev_dbg(&dac->pdev->dev, "starting DMA...\n");
++ ret = dma_start_request(dac->req.req.dmac, dac->req.req.channel);
++ if (ret)
++ goto out_stop_request;
++
++ dac_writel(dac, CTRL, DAC_BIT(EN));
++ dac->playing = 1;
++
++ return 0;
++
++out_stop_request:
++ dma_stop_request(dac->req.req.dmac,
++ dac->req.req.channel);
++out_stop_clock:
++ clk_disable(dac->sample_clk);
++ return ret;
++}
++
++static int abdac_stop(struct at32_dac *dac)
++{
++ if (dac->playing) {
++ dma_stop_request(dac->req.req.dmac, dac->req.req.channel);
++ dac_writel(dac, DATA, 0);
++ dac_writel(dac, CTRL, 0);
++ dac->playing = 0;
++ clk_disable(dac->sample_clk);
++ }
++
++ return 0;
++}
++
++static int abdac_dma_prepare(struct at32_dac *dac)
++{
++ dac->dma.buf = dma_alloc_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
++ &dac->req.buffer_start, GFP_KERNEL);
++ if (!dac->dma.buf)
++ return -ENOMEM;
++
++ dac->dma.head = dac->dma.tail = 0;
++ dac->req.periods = DMA_BUFFER_SIZE / DMA_PERIOD_SIZE;
++ dac->req.buffer_size = DMA_BUFFER_SIZE;
++
++ return 0;
++}
++
++static void abdac_dma_cleanup(struct at32_dac *dac)
++{
++ if (dac->dma.buf)
++ dma_free_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
++ dac->dma.buf, dac->req.buffer_start);
++ dac->dma.buf = NULL;
++}
++
++static void abdac_dma_block_complete(struct dma_request *req)
++{
++ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
++ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
++
++ wake_up(&dac->write_wait);
++}
++
++static void abdac_dma_error(struct dma_request *req)
++{
++ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
++ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
++
++ dev_err(&dac->pdev->dev, "DMA error\n");
++}
++
++static irqreturn_t abdac_interrupt(int irq, void *dev_id)
++{
++ struct at32_dac *dac = dev_id;
++ u32 status;
++
++ status = dac_readl(dac, INT_STATUS);
++ if (status & DAC_BIT(UNDERRUN)) {
++ dev_err(&dac->pdev->dev, "Underrun detected!\n");
++ dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN));
++ } else {
++ dev_err(&dac->pdev->dev, "Spurious interrupt (status=0x%x)\n",
++ status);
++ dac_writel(dac, INT_CLR, status);
++ }
++
++ return IRQ_HANDLED;
++}
++
++static ssize_t trans_s16be(struct at32_dac *dac, const char __user *ubuf,
++ size_t ucount)
++{
++ ssize_t ret;
++
++ if (dac->dsp_settings.channels == 2) {
++ const u32 __user *up = (const u32 __user *)ubuf;
++ u32 sample;
++
++ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
++ if (!abdac_dma_space(dac))
++ break;
++
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ dac->dma.buf[abdac_get_head(dac)] = sample;
++ dac->dma.head++;
++ }
++ } else {
++ const u16 __user *up = (const u16 __user *)ubuf;
++ u16 sample;
++
++ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
++ if (!abdac_dma_space(dac))
++ break;
++
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ dac->dma.buf[abdac_get_head(dac)]
++ = (sample << 16) | sample;
++ dac->dma.head++;
++ }
++ }
++
++ return ret;
++}
++
++static ssize_t trans_s16le(struct at32_dac *dac, const char __user *ubuf,
++ size_t ucount)
++{
++ ssize_t ret;
++
++ if (dac->dsp_settings.channels == 2) {
++ const u32 __user *up = (const u32 __user *)ubuf;
++ u32 sample;
++
++ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
++ if (!abdac_dma_space(dac))
++ break;
++
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ /* Swap bytes in each halfword */
++ dac->dma.buf[abdac_get_head(dac)] = swahb32(sample);
++ dac->dma.head++;
++ }
++ } else {
++ const u16 __user *up = (const u16 __user *)ubuf;
++ u16 sample;
++
++ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
++ if (!abdac_dma_space(dac))
++ break;
++
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ sample = swab16(sample);
++ dac->dma.buf[abdac_get_head(dac)]
++ = (sample << 16) | sample;
++ dac->dma.head++;
++ }
++ }
++
++ return ret;
++}
++
++static ssize_t abdac_dma_translate_from_user(struct at32_dac *dac,
++ const char __user *buffer,
++ size_t count)
++{
++ /* At least one buffer must be available at this point */
++ dev_dbg(&dac->pdev->dev, "copying %zu bytes from user...\n", count);
++
++ return dac->trans(dac, buffer, count);
++}
++
++static int abdac_set_format(struct at32_dac *dac, int format)
++{
++ unsigned int order;
++
++ switch (format) {
++ case AFMT_S16_BE:
++ order = 1;
++ dac->trans = trans_s16be;
++ break;
++ case AFMT_S16_LE:
++ order = 1;
++ dac->trans = trans_s16le;
++ break;
++ default:
++ dev_dbg(&dac->pdev->dev, "unsupported format: %d\n", format);
++ return -EINVAL;
++ }
++
++ if (dac->dsp_settings.channels == 2)
++ order++;
++
++ dac->dsp_settings.input_order = order;
++ dac->dsp_settings.format = format;
++ return 0;
++}
++
++static int abdac_set_sample_rate(struct at32_dac *dac, unsigned long rate)
++{
++ unsigned long new_rate;
++ int ret;
++
++ ret = clk_set_rate(dac->sample_clk, 256 * rate);
++ if (ret < 0)
++ return ret;
++
++ /* TODO: mplayer seems to have a problem with this */
++#if 0
++ new_rate = clk_get_rate(dac->sample_clk);
++ dac->dsp_settings.sample_rate = new_rate / 256;
++#else
++ dac->dsp_settings.sample_rate = rate;
++#endif
++
++ return 0;
++}
++
++static ssize_t abdac_dsp_write(struct file *file,
++ const char __user *buffer,
++ size_t count, loff_t *ppos)
++{
++ struct at32_dac *dac = file->private_data;
++ DECLARE_WAITQUEUE(wait, current);
++ unsigned int avail;
++ ssize_t copied;
++ ssize_t ret;
++
++ /* Avoid address space checking in the translation functions */
++ if (!access_ok(buffer, count, VERIFY_READ))
++ return -EFAULT;
++
++ down(&dac->sem);
++
++ if (!dac->dma.buf) {
++ ret = abdac_dma_prepare(dac);
++ if (ret)
++ goto out;
++ }
++
++ add_wait_queue(&dac->write_wait, &wait);
++ ret = 0;
++ while (count > 0) {
++ do {
++ abdac_update_dma_tail(dac);
++ avail = abdac_dma_space(dac);
++ set_current_state(TASK_INTERRUPTIBLE);
++ if (avail >= DMA_WRITE_THRESHOLD)
++ break;
++
++ if (file->f_flags & O_NONBLOCK) {
++ if (!ret)
++ ret = -EAGAIN;
++ goto out;
++ }
++
++ pr_debug("Going to wait (avail = %u, count = %zu)\n",
++ avail, count);
++
++ up(&dac->sem);
++ schedule();
++ if (signal_pending(current)) {
++ if (!ret)
++ ret = -ERESTARTSYS;
++ goto out_nosem;
++ }
++ down(&dac->sem);
++ } while (1);
++
++ copied = abdac_dma_translate_from_user(dac, buffer, count);
++ if (copied < 0) {
++ if (!ret)
++ ret = -EFAULT;
++ goto out;
++ }
++
++ abdac_start(dac);
++
++ count -= copied;
++ ret += copied;
++ }
++
++out:
++ up(&dac->sem);
++out_nosem:
++ remove_wait_queue(&dac->write_wait, &wait);
++ set_current_state(TASK_RUNNING);
++ return ret;
++}
++
++static int abdac_dsp_ioctl(struct inode *inode, struct file *file,
++ unsigned int cmd, unsigned long arg)
++{
++ struct at32_dac *dac = file->private_data;
++ int __user *up = (int __user *)arg;
++ struct audio_buf_info abinfo;
++ int val, ret;
++
++ switch (cmd) {
++ case OSS_GETVERSION:
++ return put_user(SOUND_VERSION, up);
++
++ case SNDCTL_DSP_SPEED:
++ if (get_user(val, up))
++ return -EFAULT;
++ if (val >= 0) {
++ abdac_stop(dac);
++ ret = abdac_set_sample_rate(dac, val);
++ if (ret)
++ return ret;
++ }
++ return put_user(dac->dsp_settings.sample_rate, up);
++
++ case SNDCTL_DSP_STEREO:
++ if (get_user(val, up))
++ return -EFAULT;
++ abdac_stop(dac);
++ if (val && dac->dsp_settings.channels == 1)
++ dac->dsp_settings.input_order++;
++ else if (!val && dac->dsp_settings.channels != 1)
++ dac->dsp_settings.input_order--;
++ dac->dsp_settings.channels = val ? 2 : 1;
++ return 0;
++
++ case SNDCTL_DSP_CHANNELS:
++ if (get_user(val, up))
++ return -EFAULT;
++
++ if (val) {
++ if (val < 0 || val > 2)
++ return -EINVAL;
++
++ abdac_stop(dac);
++ dac->dsp_settings.input_order
++ += val - dac->dsp_settings.channels;
++ dac->dsp_settings.channels = val;
++ }
++ return put_user(val, (int *)arg);
++
++ case SNDCTL_DSP_GETFMTS:
++ return put_user(AFMT_S16_BE | AFMT_S16_BE, up);
++
++ case SNDCTL_DSP_SETFMT:
++ if (get_user(val, up))
++ return -EFAULT;
++
++ if (val == AFMT_QUERY) {
++ val = dac->dsp_settings.format;
++ } else {
++ ret = abdac_set_format(dac, val);
++ if (ret)
++ return ret;
++ }
++ return put_user(val, up);
++
++ case SNDCTL_DSP_GETOSPACE:
++ abdac_update_dma_tail(dac);
++ abinfo.fragsize = ((1 << dac->dsp_settings.input_order)
++ * (DMA_PERIOD_SIZE / 4));
++ abinfo.bytes = (abdac_dma_space(dac)
++ << dac->dsp_settings.input_order);
++ abinfo.fragstotal = ((DMA_BUFFER_SIZE * 4)
++ >> (DMA_PERIOD_SHIFT
++ + dac->dsp_settings.input_order));
++ abinfo.fragments = ((abinfo.bytes
++ >> dac->dsp_settings.input_order)
++ / (DMA_PERIOD_SIZE / 4));
++ pr_debug("fragments=%d fragstotal=%d fragsize=%d bytes=%d\n",
++ abinfo.fragments, abinfo.fragstotal, abinfo.fragsize,
++ abinfo.bytes);
++ return copy_to_user(up, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
++
++ default:
++ dev_dbg(&dac->pdev->dev, "Unimplemented ioctl cmd: 0x%x\n", cmd);
++ return -EINVAL;
++ }
++}
++
++static int abdac_dsp_open(struct inode *inode, struct file *file)
++{
++ struct at32_dac *dac = the_dac;
++ int ret;
++
++ if (file->f_mode & FMODE_READ)
++ return -ENXIO;
++
++ down(&dac->sem);
++ ret = -EBUSY;
++ if (dac->busy)
++ goto out;
++
++ dac->dma.head = dac->dma.tail = 0;
++
++ /* FIXME: What are the correct defaults? */
++ dac->dsp_settings.channels = 2;
++ abdac_set_format(dac, AFMT_S16_BE);
++ ret = abdac_set_sample_rate(dac, 8000);
++ if (ret)
++ goto out;
++
++ file->private_data = dac;
++ dac->busy = 1;
++
++ ret = 0;
++
++out:
++ up(&dac->sem);
++ return ret;
++}
++
++static int abdac_dsp_release(struct inode *inode, struct file *file)
++{
++ struct at32_dac *dac = file->private_data;
++
++ down(&dac->sem);
++
++ abdac_stop(dac);
++ abdac_dma_cleanup(dac);
++ dac->busy = 0;
++
++ up(&dac->sem);
++
++ return 0;
++}
++
++static struct file_operations abdac_dsp_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .write = abdac_dsp_write,
++ .ioctl = abdac_dsp_ioctl,
++ .open = abdac_dsp_open,
++ .release = abdac_dsp_release,
++};
++
++static int __init abdac_probe(struct platform_device *pdev)
++{
++ struct at32_dac *dac;
++ struct resource *regs;
++ struct clk *mck;
++ struct clk *sample_clk;
++ int irq;
++ int ret;
++
++ if (the_dac)
++ return -EBUSY;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ mck = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(mck))
++ return PTR_ERR(mck);
++ sample_clk = clk_get(&pdev->dev, "sample_clk");
++ if (IS_ERR(sample_clk)) {
++ ret = PTR_ERR(sample_clk);
++ goto out_put_mck;
++ }
++ clk_enable(mck);
++
++ ret = -ENOMEM;
++ dac = kzalloc(sizeof(struct at32_dac), GFP_KERNEL);
++ if (!dac)
++ goto out_disable_clk;
++
++ spin_lock_init(&dac->lock);
++ init_MUTEX(&dac->sem);
++ init_waitqueue_head(&dac->write_wait);
++ dac->pdev = pdev;
++ dac->mck = mck;
++ dac->sample_clk = sample_clk;
++
++ dac->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!dac->regs)
++ goto out_free_dac;
++
++ ret = request_irq(irq, abdac_interrupt, 0, "dac", dac);
++ if (ret)
++ goto out_unmap_regs;
++
++ /* FIXME */
++ dac->req.req.dmac = find_dma_controller(0);
++ if (!dac->req.req.dmac)
++ goto out_free_irq;
++
++ ret = dma_alloc_channel(dac->req.req.dmac);
++ if (ret < 0)
++ goto out_free_irq;
++
++ dac->req.req.channel = ret;
++ dac->req.req.block_complete = abdac_dma_block_complete;
++ dac->req.req.error = abdac_dma_error;
++ dac->req.data_reg = regs->start + DAC_DATA;
++ dac->req.periph_id = 2; /* FIXME */
++ dac->req.direction = DMA_DIR_MEM_TO_PERIPH;
++ dac->req.width = DMA_WIDTH_32BIT;
++
++ /* Make sure the DAC is silent and disabled */
++ dac_writel(dac, DATA, 0);
++ dac_writel(dac, CTRL, 0);
++
++ ret = register_sound_dsp(&abdac_dsp_fops, -1);
++ if (ret < 0)
++ goto out_free_dma;
++ dac->dev_dsp = ret;
++
++ /* TODO: Register mixer */
++
++ the_dac = dac;
++ platform_set_drvdata(pdev, dac);
++
++ return 0;
++
++out_free_dma:
++ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
++out_free_irq:
++ free_irq(irq, dac);
++out_unmap_regs:
++ iounmap(dac->regs);
++out_free_dac:
++ kfree(dac);
++out_disable_clk:
++ clk_disable(mck);
++ clk_put(sample_clk);
++out_put_mck:
++ clk_put(mck);
++ return ret;
++}
++
++static int __exit abdac_remove(struct platform_device *pdev)
++{
++ struct at32_dac *dac;
++
++ dac = platform_get_drvdata(pdev);
++ if (dac) {
++ unregister_sound_dsp(dac->dev_dsp);
++ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
++ free_irq(platform_get_irq(pdev, 0), dac);
++ iounmap(dac->regs);
++ clk_disable(dac->mck);
++ clk_put(dac->sample_clk);
++ clk_put(dac->mck);
++ kfree(dac);
++ platform_set_drvdata(pdev, NULL);
++ the_dac = NULL;
++ }
++
++ return 0;
++}
++
++static struct platform_driver abdac_driver = {
++ .remove = __exit_p(abdac_remove),
++ .driver = {
++ .name = "abdac",
++ },
++};
++
++static int __init abdac_init(void)
++{
++ return platform_driver_probe(&abdac_driver, abdac_probe);
++}
++module_init(abdac_init);
++
++static void __exit abdac_exit(void)
++{
++ platform_driver_unregister(&abdac_driver);
++}
++module_exit(abdac_exit);
++
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_DESCRIPTION("Sound Driver for the Atmel AT32 ABDAC");
++MODULE_LICENSE("GPL");
+diff --git a/sound/oss/at32_abdac.h b/sound/oss/at32_abdac.h
+new file mode 100644
+index 0000000..3c88e25
+--- /dev/null
++++ b/sound/oss/at32_abdac.h
+@@ -0,0 +1,59 @@
++/*
++ * Register definitions for the Atmel AT32 on-chip DAC.
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __SOUND_OSS_AT32_ABDAC_H__
++#define __SOUND_OSS_AT32_ABDAC_H__
++
++/* DAC register offsets */
++#define DAC_DATA 0x0000
++#define DAC_CTRL 0x0008
++#define DAC_INT_MASK 0x000c
++#define DAC_INT_EN 0x0010
++#define DAC_INT_DIS 0x0014
++#define DAC_INT_CLR 0x0018
++#define DAC_INT_STATUS 0x001c
++#define DAC_PDC_DATA 0x0020
++
++/* Bitfields in CTRL */
++#define DAC_SWAP_OFFSET 30
++#define DAC_SWAP_SIZE 1
++#define DAC_EN_OFFSET 31
++#define DAC_EN_SIZE 1
++
++/* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */
++#define DAC_UNDERRUN_OFFSET 28
++#define DAC_UNDERRUN_SIZE 1
++#define DAC_TX_READY_OFFSET 29
++#define DAC_TX_READY_SIZE 1
++#define DAC_TX_BUFFER_EMPTY_OFFSET 30
++#define DAC_TX_BUFFER_EMPTY_SIZE 1
++#define DAC_CHANNEL_TX_END_OFFSET 31
++#define DAC_CHANNEL_TX_END_SIZE 1
++
++/* Bit manipulation macros */
++#define DAC_BIT(name) \
++ (1 << DAC_##name##_OFFSET)
++#define DAC_BF(name, value) \
++ (((value) & ((1 << DAC_##name##_SIZE) - 1)) \
++ << DAC_##name##_OFFSET)
++#define DAC_BFEXT(name, value) \
++ (((value) >> DAC_##name##_OFFSET) \
++ & ((1 << DAC_##name##_SIZE) - 1))
++#define DAC_BFINS(name, value, old) \
++ (((old) & ~(((1 << DAC_##name##_SIZE) - 1) \
++ << DAC_##name##_OFFSET)) \
++ | DAC_BF(name,value))
++
++/* Register access macros */
++#define dac_readl(port, reg) \
++ __raw_readl((port)->regs + DAC_##reg)
++#define dac_writel(port, reg, value) \
++ __raw_writel((value), (port)->regs + DAC_##reg)
++
++#endif /* __SOUND_OSS_AT32_ABDAC_H__ */
+diff --git a/sound/spi/Kconfig b/sound/spi/Kconfig
+new file mode 100644
+index 0000000..0d08c29
+--- /dev/null
++++ b/sound/spi/Kconfig
+@@ -0,0 +1,31 @@
++#SPI drivers
++
++menu "SPI devices"
++ depends on SND != n
++
++config SND_AT73C213
++ tristate "Atmel AT73C213 DAC driver"
++ depends on ATMEL_SSC
++ select SND_PCM
++ help
++ Say Y here if you want to use the Atmel AT73C213 external DAC. This
++ DAC can be found on Atmel development boards.
++
++ This driver requires the Atmel SSC driver for sound sink, a
++ peripheral found on most AT91 and AVR32 microprocessors.
++
++ To compile this driver as a module, choose M here: the module will be
++ called snd-at73c213.
++
++config SND_AT73C213_TARGET_BITRATE
++ int "Target bitrate for AT73C213"
++ depends on SND_AT73C213
++ default "48000"
++ range 8000 50000
++ help
++ Sets the target bitrate for the bitrate calculator in the driver.
++ Limited by hardware to be between 8000 Hz and 50000 Hz.
++
++ Set to 48000 Hz by default.
++
++endmenu
+diff --git a/sound/spi/Makefile b/sound/spi/Makefile
+new file mode 100644
+index 0000000..026fb73
+--- /dev/null
++++ b/sound/spi/Makefile
+@@ -0,0 +1,5 @@
++# Makefile for SPI drivers
++
++snd-at73c213-objs := at73c213.o
++
++obj-$(CONFIG_SND_AT73C213) += snd-at73c213.o
+diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
+new file mode 100644
+index 0000000..f514f47
+--- /dev/null
++++ b/sound/spi/at73c213.c
+@@ -0,0 +1,1121 @@
++/*
++ * Driver for AT73C213 16-bit stereo DAC connected to Atmel SSC
++ *
++ * Copyright (C) 2006-2007 Atmel Norway
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++
++/*#define DEBUG*/
++
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++
++#include <sound/driver.h>
++#include <sound/initval.h>
++#include <sound/control.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++
++#include <linux/atmel-ssc.h>
++
++#include <linux/spi/spi.h>
++#include <linux/spi/at73c213.h>
++
++#include "at73c213.h"
++
++#define BITRATE_MIN 8000 /* Hardware limit? */
++#define BITRATE_TARGET CONFIG_SND_AT73C213_TARGET_BITRATE
++#define BITRATE_MAX 50000 /* Hardware limit. */
++
++/* Initial (hardware reset) AT73C213 register values. */
++static u8 snd_at73c213_original_image[18] =
++{
++ 0x00, /* 00 - CTRL */
++ 0x05, /* 01 - LLIG */
++ 0x05, /* 02 - RLIG */
++ 0x08, /* 03 - LPMG */
++ 0x08, /* 04 - RPMG */
++ 0x00, /* 05 - LLOG */
++ 0x00, /* 06 - RLOG */
++ 0x22, /* 07 - OLC */
++ 0x09, /* 08 - MC */
++ 0x00, /* 09 - CSFC */
++ 0x00, /* 0A - MISC */
++ 0x00, /* 0B - */
++ 0x00, /* 0C - PRECH */
++ 0x05, /* 0D - AUXG */
++ 0x00, /* 0E - */
++ 0x00, /* 0F - */
++ 0x00, /* 10 - RST */
++ 0x00, /* 11 - PA_CTRL */
++};
++
++struct snd_at73c213 {
++ struct snd_card *card;
++ struct snd_pcm *pcm;
++ struct snd_pcm_substream *substream;
++ struct at73c213_board_info *board;
++ int irq;
++ int period;
++ unsigned long bitrate;
++ struct clk *bitclk;
++ struct ssc_device *ssc;
++ struct spi_device *spi;
++ u8 spi_wbuffer[2];
++ u8 spi_rbuffer[2];
++ /* Image of the SPI registers in AT73C213. */
++ u8 reg_image[18];
++ /* Protect registers against concurrent access. */
++ spinlock_t lock;
++};
++
++#define get_chip(card) ((struct snd_at73c213 *)card->private_data)
++
++static int
++snd_at73c213_write_reg(struct snd_at73c213 *chip, u8 reg, u8 val)
++{
++ struct spi_message msg;
++ struct spi_transfer msg_xfer = {
++ .len = 2,
++ .cs_change = 0,
++ };
++ int retval;
++
++ spi_message_init(&msg);
++
++ chip->spi_wbuffer[0] = reg;
++ chip->spi_wbuffer[1] = val;
++
++ msg_xfer.tx_buf = chip->spi_wbuffer;
++ msg_xfer.rx_buf = chip->spi_rbuffer;
++ spi_message_add_tail(&msg_xfer, &msg);
++
++ retval = spi_sync(chip->spi, &msg);
++
++ if (!retval)
++ chip->reg_image[reg] = val;
++
++ return retval;
++}
++
++static struct snd_pcm_hardware snd_at73c213_playback_hw = {
++ .info = SNDRV_PCM_INFO_INTERLEAVED |
++ SNDRV_PCM_INFO_BLOCK_TRANSFER,
++ .formats = SNDRV_PCM_FMTBIT_S16_BE,
++ .rates = SNDRV_PCM_RATE_CONTINUOUS,
++ .rate_min = 8000, /* Replaced by chip->bitrate later. */
++ .rate_max = 50000, /* Replaced by chip->bitrate later. */
++ .channels_min = 2,
++ .channels_max = 2,
++ .buffer_bytes_max = 64 * 1024 - 1,
++ .period_bytes_min = 512,
++ .period_bytes_max = 64 * 1024 - 1,
++ .periods_min = 4,
++ .periods_max = 1024,
++};
++
++/*
++ * Calculate and set bitrate and divisions.
++ */
++static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip)
++{
++ unsigned long ssc_rate = clk_get_rate(chip->ssc->clk);
++ unsigned long dac_rate_new, ssc_div, status;
++ unsigned long ssc_div_max, ssc_div_min;
++ int max_tries;
++
++ /*
++ * We connect two clocks here, picking divisors so the I2S clocks
++ * out data at the same rate the DAC clocks it in ... and as close
++ * as practical to the desired target rate.
++ *
++ * The DAC master clock (MCLK) is programmable, and is either 256
++ * or (not here) 384 times the I2S output clock (BCLK).
++ */
++
++ /* SSC clock / (bitrate * stereo * 16-bit). */
++ ssc_div = ssc_rate / (BITRATE_TARGET * 2 * 16);
++ ssc_div_min = ssc_rate / (BITRATE_MAX * 2 * 16);
++ ssc_div_max = ssc_rate / (BITRATE_MIN * 2 * 16);
++ max_tries = (ssc_div_max - ssc_div_min) / 2;
++
++ if (max_tries < 1)
++ max_tries = 1;
++
++ /* ssc_div must be a power of 2. */
++ ssc_div = (ssc_div + 1) & ~1UL;
++
++ if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) {
++ ssc_div -= 2;
++ if ((ssc_rate / (ssc_div * 2 * 16)) > BITRATE_MAX)
++ return -ENXIO;
++ }
++
++ /* Search for a possible bitrate. */
++ do {
++ /* SSC clock / (ssc divider * 16-bit * stereo). */
++ if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN)
++ return -ENXIO;
++
++ /* 256 / (2 * 16) = 8 */
++ dac_rate_new = 8 * (ssc_rate / ssc_div);
++
++ status = clk_round_rate(chip->board->dac_clk, dac_rate_new);
++ if (status < 0)
++ return status;
++
++ /* Ignore difference smaller than 256 Hz. */
++ if ((status/256) == (dac_rate_new/256))
++ goto set_rate;
++
++ ssc_div += 2;
++ } while (--max_tries);
++
++ /* Not able to find a valid bitrate. */
++ return -ENXIO;
++
++set_rate:
++ status = clk_set_rate(chip->board->dac_clk, status);
++ if (status < 0)
++ return status;
++
++ /* Set divider in SSC device. */
++ ssc_writel(chip->ssc->regs, CMR, ssc_div/2);
++
++ /* SSC clock / (ssc divider * 16-bit * stereo). */
++ chip->bitrate = ssc_rate / (ssc_div * 16 * 2);
++
++ dev_info(&chip->spi->dev,
++ "at73c213: supported bitrate is %lu (%lu divider)\n",
++ chip->bitrate, ssc_div);
++
++ return 0;
++}
++
++static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++
++ snd_at73c213_playback_hw.rate_min = chip->bitrate;
++ snd_at73c213_playback_hw.rate_max = chip->bitrate;
++ runtime->hw = snd_at73c213_playback_hw;
++ chip->substream = substream;
++
++ return 0;
++}
++
++static int snd_at73c213_pcm_close(struct snd_pcm_substream *substream)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ chip->substream = NULL;
++ return 0;
++}
++
++static int snd_at73c213_pcm_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *hw_params)
++{
++ return snd_pcm_lib_malloc_pages(substream,
++ params_buffer_bytes(hw_params));
++}
++
++static int snd_at73c213_pcm_hw_free(struct snd_pcm_substream *substream)
++{
++ return snd_pcm_lib_free_pages(substream);
++}
++
++static int snd_at73c213_pcm_prepare(struct snd_pcm_substream *substream)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ int block_size;
++
++ block_size = frames_to_bytes(runtime, runtime->period_size);
++
++ chip->period = 0;
++
++ ssc_writel(chip->ssc->regs, PDC_TPR,
++ (long)runtime->dma_addr);
++ ssc_writel(chip->ssc->regs, PDC_TCR, runtime->period_size * 2);
++ ssc_writel(chip->ssc->regs, PDC_TNPR,
++ (long)runtime->dma_addr + block_size);
++ ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
++
++ return 0;
++}
++
++static int snd_at73c213_pcm_trigger(struct snd_pcm_substream *substream,
++ int cmd)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ int retval = 0;
++
++ spin_lock(&chip->lock);
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ ssc_writel(chip->ssc->regs, IER, SSC_BIT(IER_ENDTX));
++ ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTEN));
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTDIS));
++ ssc_writel(chip->ssc->regs, IDR, SSC_BIT(IDR_ENDTX));
++ break;
++ default:
++ dev_dbg(&chip->spi->dev, "spurious command %x\n", cmd);
++ retval = -EINVAL;
++ break;
++ }
++
++ spin_unlock(&chip->lock);
++
++ return retval;
++}
++
++static snd_pcm_uframes_t
++snd_at73c213_pcm_pointer(struct snd_pcm_substream *substream)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ snd_pcm_uframes_t pos;
++ unsigned long bytes;
++
++ bytes = ssc_readl(chip->ssc->regs, PDC_TPR)
++ - (unsigned long)runtime->dma_addr;
++
++ pos = bytes_to_frames(runtime, bytes);
++ if (pos >= runtime->buffer_size)
++ pos -= runtime->buffer_size;
++
++ return pos;
++}
++
++static struct snd_pcm_ops at73c213_playback_ops = {
++ .open = snd_at73c213_pcm_open,
++ .close = snd_at73c213_pcm_close,
++ .ioctl = snd_pcm_lib_ioctl,
++ .hw_params = snd_at73c213_pcm_hw_params,
++ .hw_free = snd_at73c213_pcm_hw_free,
++ .prepare = snd_at73c213_pcm_prepare,
++ .trigger = snd_at73c213_pcm_trigger,
++ .pointer = snd_at73c213_pcm_pointer,
++};
++
++static void snd_at73c213_pcm_free(struct snd_pcm *pcm)
++{
++ struct snd_at73c213 *chip = snd_pcm_chip(pcm);
++ if (chip->pcm) {
++ snd_pcm_lib_preallocate_free_for_all(chip->pcm);
++ chip->pcm = NULL;
++ }
++}
++
++static int __devinit snd_at73c213_pcm_new(struct snd_at73c213 *chip, int device)
++{
++ struct snd_pcm *pcm;
++ int retval;
++
++ retval = snd_pcm_new(chip->card, chip->card->shortname,
++ device, 1, 0, &pcm);
++ if (retval < 0)
++ goto out;
++
++ pcm->private_data = chip;
++ pcm->private_free = snd_at73c213_pcm_free;
++ pcm->info_flags = SNDRV_PCM_INFO_BLOCK_TRANSFER;
++ strcpy(pcm->name, "at73c213");
++ chip->pcm = pcm;
++
++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &at73c213_playback_ops);
++
++ retval = snd_pcm_lib_preallocate_pages_for_all(chip->pcm,
++ SNDRV_DMA_TYPE_DEV, &chip->ssc->pdev->dev,
++ 64 * 1024, 64 * 1024);
++out:
++ return retval;
++}
++
++static irqreturn_t snd_at73c213_interrupt(int irq, void *dev_id)
++{
++ struct snd_at73c213 *chip = dev_id;
++ struct snd_pcm_runtime *runtime = chip->substream->runtime;
++ u32 status;
++ int offset;
++ int block_size;
++ int next_period;
++ int retval = IRQ_NONE;
++
++ spin_lock(&chip->lock);
++
++ block_size = frames_to_bytes(runtime, runtime->period_size);
++ status = ssc_readl(chip->ssc->regs, IMR);
++
++ if (status & SSC_BIT(IMR_ENDTX)) {
++ chip->period++;
++ if (chip->period == runtime->periods)
++ chip->period = 0;
++ next_period = chip->period + 1;
++ if (next_period == runtime->periods)
++ next_period = 0;
++
++ offset = block_size * next_period;
++
++ ssc_writel(chip->ssc->regs, PDC_TNPR,
++ (long)runtime->dma_addr + offset);
++ ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
++ retval = IRQ_HANDLED;
++ }
++
++ ssc_readl(chip->ssc->regs, IMR);
++ spin_unlock(&chip->lock);
++
++ if (status & SSC_BIT(IMR_ENDTX))
++ snd_pcm_period_elapsed(chip->substream);
++
++ return retval;
++}
++
++/*
++ * Mixer functions.
++ */
++static int snd_at73c213_mono_get(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ int reg = kcontrol->private_value & 0xff;
++ int shift = (kcontrol->private_value >> 8) & 0xff;
++ int mask = (kcontrol->private_value >> 16) & 0xff;
++ int invert = (kcontrol->private_value >> 24) & 0xff;
++
++ spin_lock_irq(&chip->lock);
++
++ ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & mask;
++
++ if (invert)
++ ucontrol->value.integer.value[0] =
++ (mask - ucontrol->value.integer.value[0]);
++
++ spin_unlock_irq(&chip->lock);
++
++ return 0;
++}
++
++static int snd_at73c213_mono_put(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ int reg = kcontrol->private_value & 0xff;
++ int shift = (kcontrol->private_value >> 8) & 0xff;
++ int mask = (kcontrol->private_value >> 16) & 0xff;
++ int invert = (kcontrol->private_value >> 24) & 0xff;
++ int change, retval;
++ unsigned short val;
++
++ val = (ucontrol->value.integer.value[0] & mask);
++ if (invert)
++ val = mask - val;
++ val <<= shift;
++
++ spin_lock_irq(&chip->lock);
++
++ val = (chip->reg_image[reg] & ~(mask << shift)) | val;
++ change = val != chip->reg_image[reg];
++ retval = snd_at73c213_write_reg(chip, reg, val);
++
++ spin_unlock_irq(&chip->lock);
++
++ if (retval)
++ return retval;
++
++ return change;
++}
++
++static int snd_at73c213_stereo_info(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ int mask = (kcontrol->private_value >> 24) & 0xff;
++
++ if (mask == 1)
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
++ else
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++
++ uinfo->count = 2;
++ uinfo->value.integer.min = 0;
++ uinfo->value.integer.max = mask;
++
++ return 0;
++}
++
++static int snd_at73c213_stereo_get(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ int left_reg = kcontrol->private_value & 0xff;
++ int right_reg = (kcontrol->private_value >> 8) & 0xff;
++ int shift_left = (kcontrol->private_value >> 16) & 0x07;
++ int shift_right = (kcontrol->private_value >> 19) & 0x07;
++ int mask = (kcontrol->private_value >> 24) & 0xff;
++ int invert = (kcontrol->private_value >> 22) & 1;
++
++ spin_lock_irq(&chip->lock);
++
++ ucontrol->value.integer.value[0] =
++ (chip->reg_image[left_reg] >> shift_left) & mask;
++ ucontrol->value.integer.value[1] =
++ (chip->reg_image[right_reg] >> shift_right) & mask;
++
++ if (invert) {
++ ucontrol->value.integer.value[0] =
++ (mask - ucontrol->value.integer.value[0]);
++ ucontrol->value.integer.value[1] =
++ (mask - ucontrol->value.integer.value[1]);
++ }
++
++ spin_unlock_irq(&chip->lock);
++
++ return 0;
++}
++
++static int snd_at73c213_stereo_put(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ int left_reg = kcontrol->private_value & 0xff;
++ int right_reg = (kcontrol->private_value >> 8) & 0xff;
++ int shift_left = (kcontrol->private_value >> 16) & 0x07;
++ int shift_right = (kcontrol->private_value >> 19) & 0x07;
++ int mask = (kcontrol->private_value >> 24) & 0xff;
++ int invert = (kcontrol->private_value >> 22) & 1;
++ int change, retval;
++ unsigned short val1, val2;
++
++ val1 = ucontrol->value.integer.value[0] & mask;
++ val2 = ucontrol->value.integer.value[1] & mask;
++ if (invert) {
++ val1 = mask - val1;
++ val2 = mask - val2;
++ }
++ val1 <<= shift_left;
++ val2 <<= shift_right;
++
++ spin_lock_irq(&chip->lock);
++
++ val1 = (chip->reg_image[left_reg] & ~(mask << shift_left)) | val1;
++ val2 = (chip->reg_image[right_reg] & ~(mask << shift_right)) | val2;
++ change = val1 != chip->reg_image[left_reg]
++ || val2 != chip->reg_image[right_reg];
++ retval = snd_at73c213_write_reg(chip, left_reg, val1);
++ if (retval) {
++ spin_unlock_irq(&chip->lock);
++ goto out;
++ }
++ retval = snd_at73c213_write_reg(chip, right_reg, val2);
++ if (retval) {
++ spin_unlock_irq(&chip->lock);
++ goto out;
++ }
++
++ spin_unlock_irq(&chip->lock);
++
++ return change;
++
++out:
++ return retval;
++}
++
++static int snd_at73c213_mono_switch_info(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
++ uinfo->count = 1;
++ uinfo->value.integer.min = 0;
++ uinfo->value.integer.max = 1;
++
++ return 0;
++}
++
++static int snd_at73c213_mono_switch_get(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ int reg = kcontrol->private_value & 0xff;
++ int shift = (kcontrol->private_value >> 8) & 0xff;
++ int invert = (kcontrol->private_value >> 24) & 0xff;
++
++ spin_lock_irq(&chip->lock);
++
++ ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & 0x01;
++
++ if (invert)
++ ucontrol->value.integer.value[0] =
++ (0x01 - ucontrol->value.integer.value[0]);
++
++ spin_unlock_irq(&chip->lock);
++
++ return 0;
++}
++
++static int snd_at73c213_mono_switch_put(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ int reg = kcontrol->private_value & 0xff;
++ int shift = (kcontrol->private_value >> 8) & 0xff;
++ int mask = (kcontrol->private_value >> 16) & 0xff;
++ int invert = (kcontrol->private_value >> 24) & 0xff;
++ int change, retval;
++ unsigned short val;
++
++ if (ucontrol->value.integer.value[0])
++ val = mask;
++ else
++ val = 0;
++
++ if (invert)
++ val = mask - val;
++ val <<= shift;
++
++ spin_lock_irq(&chip->lock);
++
++ val |= (chip->reg_image[reg] & ~(mask << shift));
++ change = val != chip->reg_image[reg];
++
++ retval = snd_at73c213_write_reg(chip, reg, val);
++
++ spin_unlock_irq(&chip->lock);
++
++ if (retval)
++ return retval;
++
++ return change;
++}
++
++static int snd_at73c213_pa_volume_info(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++ uinfo->count = 1;
++ uinfo->value.integer.min = 0;
++ uinfo->value.integer.max = ((kcontrol->private_value >> 16) & 0xff) - 1;
++
++ return 0;
++}
++
++static int snd_at73c213_line_capture_volume_info(
++ struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++ uinfo->count = 2;
++ /* When inverted will give values 0x10001 => 0. */
++ uinfo->value.integer.min = 14;
++ uinfo->value.integer.max = 31;
++
++ return 0;
++}
++
++static int snd_at73c213_aux_capture_volume_info(
++ struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++ uinfo->count = 1;
++ /* When inverted will give values 0x10001 => 0. */
++ uinfo->value.integer.min = 14;
++ uinfo->value.integer.max = 31;
++
++ return 0;
++}
++
++#define AT73C213_MONO_SWITCH(xname, xindex, reg, shift, mask, invert) \
++{ \
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
++ .name = xname, \
++ .index = xindex, \
++ .info = snd_at73c213_mono_switch_info, \
++ .get = snd_at73c213_mono_switch_get, \
++ .put = snd_at73c213_mono_switch_put, \
++ .private_value = (reg | (shift << 8) | (mask << 16) | (invert << 24)) \
++}
++
++#define AT73C213_STEREO(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
++{ \
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
++ .name = xname, \
++ .index = xindex, \
++ .info = snd_at73c213_stereo_info, \
++ .get = snd_at73c213_stereo_get, \
++ .put = snd_at73c213_stereo_put, \
++ .private_value = (left_reg | (right_reg << 8) \
++ | (shift_left << 16) | (shift_right << 19) \
++ | (mask << 24) | (invert << 22)) \
++}
++
++static struct snd_kcontrol_new snd_at73c213_controls[] __devinitdata = {
++AT73C213_STEREO("Master Playback Volume", 0, DAC_LMPG, DAC_RMPG, 0, 0, 0x1f, 1),
++AT73C213_STEREO("Master Playback Switch", 0, DAC_LMPG, DAC_RMPG, 5, 5, 1, 1),
++AT73C213_STEREO("PCM Playback Volume", 0, DAC_LLOG, DAC_RLOG, 0, 0, 0x1f, 1),
++AT73C213_STEREO("PCM Playback Switch", 0, DAC_LLOG, DAC_RLOG, 5, 5, 1, 1),
++AT73C213_MONO_SWITCH("Mono PA Playback Switch", 0, DAC_CTRL, DAC_CTRL_ONPADRV, 0x01, 0),
++{
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++ .name = "PA Playback Volume",
++ .index = 0,
++ .info = snd_at73c213_pa_volume_info,
++ .get = snd_at73c213_mono_get,
++ .put = snd_at73c213_mono_put,
++ .private_value = PA_CTRL | (PA_CTRL_APAGAIN << 8) | (0x0f << 16) | (1 << 24),
++},
++AT73C213_MONO_SWITCH("PA High Gain Playback Switch", 0, PA_CTRL, PA_CTRL_APALP, 0x01, 1),
++AT73C213_MONO_SWITCH("PA Playback Switch", 0, PA_CTRL, PA_CTRL_APAON, 0x01, 0),
++{
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++ .name = "Aux Capture Volume",
++ .index = 0,
++ .info = snd_at73c213_aux_capture_volume_info,
++ .get = snd_at73c213_mono_get,
++ .put = snd_at73c213_mono_put,
++ .private_value = DAC_AUXG | (0 << 8) | (0x1f << 16) | (1 << 24),
++},
++AT73C213_MONO_SWITCH("Aux Capture Switch", 0, DAC_CTRL, DAC_CTRL_ONAUXIN, 0x01, 0),
++{
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++ .name = "Line Capture Volume",
++ .index = 0,
++ .info = snd_at73c213_line_capture_volume_info,
++ .get = snd_at73c213_stereo_get,
++ .put = snd_at73c213_stereo_put,
++ .private_value = DAC_LLIG | (DAC_RLIG << 8) | (0 << 16) | (0 << 19)
++ | (0x1f << 24) | (1 << 22),
++},
++AT73C213_MONO_SWITCH("Line Capture Switch", 0, DAC_CTRL, 0, 0x03, 0),
++};
++
++static int __devinit snd_at73c213_mixer(struct snd_at73c213 *chip)
++{
++ struct snd_card *card;
++ int errval, idx;
++
++ if (chip == NULL || chip->pcm == NULL)
++ return -EINVAL;
++
++ card = chip->card;
++
++ strcpy(card->mixername, chip->pcm->name);
++
++ for (idx = 0; idx < ARRAY_SIZE(snd_at73c213_controls); idx++) {
++ errval = snd_ctl_add(card,
++ snd_ctl_new1(&snd_at73c213_controls[idx],
++ chip));
++ if (errval < 0)
++ goto cleanup;
++ }
++
++ return 0;
++
++cleanup:
++ for (idx = 1; idx < ARRAY_SIZE(snd_at73c213_controls) + 1; idx++) {
++ struct snd_kcontrol *kctl;
++ kctl = snd_ctl_find_numid(card, idx);
++ if (kctl)
++ snd_ctl_remove(card, kctl);
++ }
++ return errval;
++}
++
++/*
++ * Device functions
++ */
++static int snd_at73c213_ssc_init(struct snd_at73c213 *chip)
++{
++ /*
++ * Continuous clock output.
++ * Starts on falling TF.
++ * Delay 1 cycle (1 bit).
++ * Periode is 16 bit (16 - 1).
++ */
++ ssc_writel(chip->ssc->regs, TCMR,
++ SSC_BF(TCMR_CKO, 1)
++ | SSC_BF(TCMR_START, 4)
++ | SSC_BF(TCMR_STTDLY, 1)
++ | SSC_BF(TCMR_PERIOD, 16 - 1));
++ /*
++ * Data length is 16 bit (16 - 1).
++ * Transmit MSB first.
++ * Transmit 2 words each transfer.
++ * Frame sync length is 16 bit (16 - 1).
++ * Frame starts on negative pulse.
++ */
++ ssc_writel(chip->ssc->regs, TFMR,
++ SSC_BF(TFMR_DATLEN, 16 - 1)
++ | SSC_BIT(TFMR_MSBF)
++ | SSC_BF(TFMR_DATNB, 1)
++ | SSC_BF(TFMR_FSLEN, 16 - 1)
++ | SSC_BF(TFMR_FSOS, 1));
++
++ return 0;
++}
++
++static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
++{
++ int retval;
++ unsigned char dac_ctrl = 0;
++
++ retval = snd_at73c213_set_bitrate(chip);
++ if (retval)
++ goto out;
++
++ /* Enable DAC master clock. */
++ clk_enable(chip->board->dac_clk);
++
++ /* Initialize at73c213 on SPI bus. */
++ retval = snd_at73c213_write_reg(chip, DAC_RST, 0x04);
++ if (retval)
++ goto out_clk;
++ msleep(1);
++ retval = snd_at73c213_write_reg(chip, DAC_RST, 0x03);
++ if (retval)
++ goto out_clk;
++
++ /* Precharge everything. */
++ retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0xff);
++ if (retval)
++ goto out_clk;
++ retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APAPRECH));
++ if (retval)
++ goto out_clk;
++ retval = snd_at73c213_write_reg(chip, DAC_CTRL,
++ (1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR));
++ if (retval)
++ goto out_clk;
++
++ msleep(50);
++
++ /* Stop precharging PA. */
++ retval = snd_at73c213_write_reg(chip, PA_CTRL,
++ (1<<PA_CTRL_APALP) | 0x0f);
++ if (retval)
++ goto out_clk;
++
++ msleep(450);
++
++ /* Stop precharging DAC, turn on master power. */
++ retval = snd_at73c213_write_reg(chip, DAC_PRECH, (1<<DAC_PRECH_ONMSTR));
++ if (retval)
++ goto out_clk;
++
++ msleep(1);
++
++ /* Turn on DAC. */
++ dac_ctrl = (1<<DAC_CTRL_ONDACL) | (1<<DAC_CTRL_ONDACR)
++ | (1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR);
++
++ retval = snd_at73c213_write_reg(chip, DAC_CTRL, dac_ctrl);
++ if (retval)
++ goto out_clk;
++
++ /* Mute sound. */
++ retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
++ if (retval)
++ goto out_clk;
++ retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
++ if (retval)
++ goto out_clk;
++ retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
++ if (retval)
++ goto out_clk;
++ retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
++ if (retval)
++ goto out_clk;
++ retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
++ if (retval)
++ goto out_clk;
++ retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
++ if (retval)
++ goto out_clk;
++ retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
++ if (retval)
++ goto out_clk;
++
++ /* Enable I2S device, i.e. clock output. */
++ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
++
++ goto out;
++
++out_clk:
++ clk_disable(chip->board->dac_clk);
++out:
++ return retval;
++}
++
++static int snd_at73c213_dev_free(struct snd_device *device)
++{
++ struct snd_at73c213 *chip = device->device_data;
++
++ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
++ if (chip->irq >= 0) {
++ free_irq(chip->irq, chip);
++ chip->irq = -1;
++ }
++
++ return 0;
++}
++
++static int __devinit snd_at73c213_dev_init(struct snd_card *card,
++ struct spi_device *spi)
++{
++ static struct snd_device_ops ops = {
++ .dev_free = snd_at73c213_dev_free,
++ };
++ struct snd_at73c213 *chip = get_chip(card);
++ int irq, retval;
++
++ irq = chip->ssc->irq;
++ if (irq < 0)
++ return irq;
++
++ spin_lock_init(&chip->lock);
++ chip->card = card;
++ chip->irq = -1;
++
++ retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip);
++ if (retval) {
++ dev_dbg(&chip->spi->dev, "unable to request irq %d\n", irq);
++ goto out;
++ }
++ chip->irq = irq;
++
++ memcpy(&chip->reg_image, &snd_at73c213_original_image,
++ sizeof(snd_at73c213_original_image));
++
++ retval = snd_at73c213_ssc_init(chip);
++ if (retval)
++ goto out_irq;
++
++ retval = snd_at73c213_chip_init(chip);
++ if (retval)
++ goto out_irq;
++
++ retval = snd_at73c213_pcm_new(chip, 0);
++ if (retval)
++ goto out_irq;
++
++ retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
++ if (retval)
++ goto out_irq;
++
++ retval = snd_at73c213_mixer(chip);
++ if (retval)
++ goto out_snd_dev;
++
++ snd_card_set_dev(card, &spi->dev);
++
++ goto out;
++
++out_snd_dev:
++ snd_device_free(card, chip);
++out_irq:
++ free_irq(chip->irq, chip);
++ chip->irq = -1;
++out:
++ return retval;
++}
++
++static int snd_at73c213_probe(struct spi_device *spi)
++{
++ struct snd_card *card;
++ struct snd_at73c213 *chip;
++ struct at73c213_board_info *board;
++ int retval;
++ char id[16];
++
++ board = spi->dev.platform_data;
++ if (!board) {
++ dev_dbg(&spi->dev, "no platform_data\n");
++ return -ENXIO;
++ }
++
++ if (!board->dac_clk) {
++ dev_dbg(&spi->dev, "no DAC clk\n");
++ return -ENXIO;
++ }
++
++ if (IS_ERR(board->dac_clk)) {
++ dev_dbg(&spi->dev, "no DAC clk\n");
++ return PTR_ERR(board->dac_clk);
++ }
++
++ retval = -ENOMEM;
++
++ /* Allocate "card" using some unused identifiers. */
++ snprintf(id, sizeof id, "at73c213_%d", board->ssc_id);
++ card = snd_card_new(-1, id, THIS_MODULE, sizeof(struct snd_at73c213));
++ if (!card)
++ goto out;
++
++ chip = card->private_data;
++ chip->spi = spi;
++ chip->board = board;
++
++ chip->ssc = ssc_request(board->ssc_id);
++ if (IS_ERR(chip->ssc)) {
++ dev_dbg(&spi->dev, "could not get ssc%d device\n",
++ board->ssc_id);
++ retval = PTR_ERR(chip->ssc);
++ goto out_card;
++ }
++
++ retval = snd_at73c213_dev_init(card, spi);
++ if (retval)
++ goto out_ssc;
++
++ strcpy(card->driver, "at73c213");
++ strcpy(card->shortname, board->shortname);
++ sprintf(card->longname, "%s on irq %d", card->shortname, chip->irq);
++
++ retval = snd_card_register(card);
++ if (retval)
++ goto out_ssc;
++
++ dev_set_drvdata(&spi->dev, card);
++
++ goto out;
++
++out_ssc:
++ ssc_free(chip->ssc);
++out_card:
++ snd_card_free(card);
++out:
++ return retval;
++}
++
++static int __devexit snd_at73c213_remove(struct spi_device *spi)
++{
++ struct snd_card *card = dev_get_drvdata(&spi->dev);
++ struct snd_at73c213 *chip = card->private_data;
++ int retval;
++
++ /* Stop playback. */
++ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
++
++ /* Mute sound. */
++ retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
++ if (retval)
++ goto out;
++ retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
++ if (retval)
++ goto out;
++ retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
++ if (retval)
++ goto out;
++ retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
++ if (retval)
++ goto out;
++ retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
++ if (retval)
++ goto out;
++ retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
++ if (retval)
++ goto out;
++ retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
++ if (retval)
++ goto out;
++
++ /* Turn off PA. */
++ retval = snd_at73c213_write_reg(chip, PA_CTRL, (chip->reg_image[PA_CTRL]|0x0f));
++ if (retval)
++ goto out;
++ msleep(10);
++ retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0f);
++ if (retval)
++ goto out;
++
++ /* Turn off external DAC. */
++ retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x0c);
++ if (retval)
++ goto out;
++ msleep(2);
++ retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x00);
++ if (retval)
++ goto out;
++
++ /* Turn off master power. */
++ retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0x00);
++ if (retval)
++ goto out;
++
++out:
++ /* Stop DAC master clock. */
++ clk_disable(chip->board->dac_clk);
++
++ ssc_free(chip->ssc);
++ snd_card_free(card);
++ dev_set_drvdata(&spi->dev, NULL);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++static int snd_at73c213_suspend(struct spi_device *spi, pm_message_t msg)
++{
++ struct snd_card *card = dev_get_drvdata(&spi->dev);
++ struct snd_at73c213 *chip = card->private_data;
++
++ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
++ clk_disable(chip->board->dac_clk);
++
++ return 0;
++}
++
++static int snd_at73c213_resume(struct spi_device *spi)
++{
++ struct snd_card *card = dev_get_drvdata(&spi->dev);
++ struct snd_at73c213 *chip = card->private_data;
++
++ clk_enable(chip->board->dac_clk);
++ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
++
++ return 0;
++}
++#else
++#define snd_at73c213_suspend NULL
++#define snd_at73c213_resume NULL
++#endif
++
++static struct spi_driver at73c213_driver = {
++ .driver = {
++ .name = "at73c213",
++ },
++ .probe = snd_at73c213_probe,
++ .suspend = snd_at73c213_suspend,
++ .resume = snd_at73c213_resume,
++ .remove = __devexit_p(snd_at73c213_remove),
++};
++
++static int __init at73c213_init(void)
++{
++ return spi_register_driver(&at73c213_driver);
++}
++module_init(at73c213_init);
++
++static void __exit at73c213_exit(void)
++{
++ spi_unregister_driver(&at73c213_driver);
++}
++module_exit(at73c213_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("Sound driver for AT73C213 with Atmel SSC");
++MODULE_LICENSE("GPL");
+diff --git a/sound/spi/at73c213.h b/sound/spi/at73c213.h
+new file mode 100644
+index 0000000..fd8b372
+--- /dev/null
++++ b/sound/spi/at73c213.h
+@@ -0,0 +1,119 @@
++/*
++ * Driver for the AT73C213 16-bit stereo DAC on Atmel ATSTK1000
++ *
++ * Copyright (C) 2006 - 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++ * 02111-1307, USA.
++ *
++ * The full GNU General Public License is included in this
++ * distribution in the file called COPYING.
++ */
++
++#ifndef _SND_AT73C213_H
++#define _SND_AT73C213_H
++
++/* DAC control register */
++#define DAC_CTRL 0x00
++#define DAC_CTRL_ONPADRV 7
++#define DAC_CTRL_ONAUXIN 6
++#define DAC_CTRL_ONDACR 5
++#define DAC_CTRL_ONDACL 4
++#define DAC_CTRL_ONLNOR 3
++#define DAC_CTRL_ONLNOL 2
++#define DAC_CTRL_ONLNIR 1
++#define DAC_CTRL_ONLNIL 0
++
++/* DAC left line in gain register */
++#define DAC_LLIG 0x01
++#define DAC_LLIG_LLIG 0
++
++/* DAC right line in gain register */
++#define DAC_RLIG 0x02
++#define DAC_RLIG_RLIG 0
++
++/* DAC Left Master Playback Gain Register */
++#define DAC_LMPG 0x03
++#define DAC_LMPG_LMPG 0
++
++/* DAC Right Master Playback Gain Register */
++#define DAC_RMPG 0x04
++#define DAC_RMPG_RMPG 0
++
++/* DAC Left Line Out Gain Register */
++#define DAC_LLOG 0x05
++#define DAC_LLOG_LLOG 0
++
++/* DAC Right Line Out Gain Register */
++#define DAC_RLOG 0x06
++#define DAC_RLOG_RLOG 0
++
++/* DAC Output Level Control Register */
++#define DAC_OLC 0x07
++#define DAC_OLC_RSHORT 7
++#define DAC_OLC_ROLC 4
++#define DAC_OLC_LSHORT 3
++#define DAC_OLC_LOLC 0
++
++/* DAC Mixer Control Register */
++#define DAC_MC 0x08
++#define DAC_MC_INVR 5
++#define DAC_MC_INVL 4
++#define DAC_MC_RMSMIN2 3
++#define DAC_MC_RMSMIN1 2
++#define DAC_MC_LMSMIN2 1
++#define DAC_MC_LMSMIN1 0
++
++/* DAC Clock and Sampling Frequency Control Register */
++#define DAC_CSFC 0x09
++#define DAC_CSFC_OVRSEL 4
++
++/* DAC Miscellaneous Register */
++#define DAC_MISC 0x0A
++#define DAC_MISC_VCMCAPSEL 7
++#define DAC_MISC_DINTSEL 4
++#define DAC_MISC_DITHEN 3
++#define DAC_MISC_DEEMPEN 2
++#define DAC_MISC_NBITS 0
++
++/* DAC Precharge Control Register */
++#define DAC_PRECH 0x0C
++#define DAC_PRECH_PRCHGPDRV 7
++#define DAC_PRECH_PRCHGAUX1 6
++#define DAC_PRECH_PRCHGLNOR 5
++#define DAC_PRECH_PRCHGLNOL 4
++#define DAC_PRECH_PRCHGLNIR 3
++#define DAC_PRECH_PRCHGLNIL 2
++#define DAC_PRECH_PRCHG 1
++#define DAC_PRECH_ONMSTR 0
++
++/* DAC Auxiliary Input Gain Control Register */
++#define DAC_AUXG 0x0D
++#define DAC_AUXG_AUXG 0
++
++/* DAC Reset Register */
++#define DAC_RST 0x10
++#define DAC_RST_RESMASK 2
++#define DAC_RST_RESFILZ 1
++#define DAC_RST_RSTZ 0
++
++/* Power Amplifier Control Register */
++#define PA_CTRL 0x11
++#define PA_CTRL_APAON 6
++#define PA_CTRL_APAPRECH 5
++#define PA_CTRL_APALP 4
++#define PA_CTRL_APAGAIN 0
++
++#endif /* _SND_AT73C213_H */
diff --git a/target/device/Atmel/atngw100/kernel-patches/linux-2.6.23-200-fix-include-typo-for-atngw100-board.patch b/target/device/Atmel/atngw100/kernel-patches/linux-2.6.23-200-fix-include-typo-for-atngw100-board.patch
new file mode 100644
index 000000000..99a9d149b
--- /dev/null
+++ b/target/device/Atmel/atngw100/kernel-patches/linux-2.6.23-200-fix-include-typo-for-atngw100-board.patch
@@ -0,0 +1,11 @@
+--- a/arch/avr32/boards/atngw100/setup.c 2007-11-02 10:47:52.000000000 +0100
++++ b/arch/avr32/boards/atngw100/setup.c 2007-11-02 10:48:00.000000000 +0100
+@@ -20,7 +20,7 @@
+ #include <asm/io.h>
+ #include <asm/setup.h>
+
+-#include <asm/arch/at32ap7000.h>
++#include <asm/arch/at32ap700x.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/init.h>
+ #include <asm/arch/portmux.h>
diff --git a/target/device/Atmel/atngw100/kernel-patches/linux-2.6.24-100-avr32-git.1.patch b/target/device/Atmel/atngw100/kernel-patches/linux-2.6.24-100-avr32-git.1.patch
new file mode 100644
index 000000000..173000063
--- /dev/null
+++ b/target/device/Atmel/atngw100/kernel-patches/linux-2.6.24-100-avr32-git.1.patch
@@ -0,0 +1,16922 @@
+diff -Nrup linux-2.6.24/arch/arm/mach-at91/at91sam9261_devices.c linux-avr32/arch/arm/mach-at91/at91sam9261_devices.c
+--- linux-2.6.24/arch/arm/mach-at91/at91sam9261_devices.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/arm/mach-at91/at91sam9261_devices.c 2008-02-01 14:51:35.000000000 -0500
+@@ -530,6 +530,20 @@ void __init at91_add_device_lcdc(struct
+ at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
+ at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
+
++#ifdef CONFIG_FB_INTSRAM
++ {
++ void __iomem *fb;
++ struct resource *fb_res = &lcdc_resources[2];
++ size_t fb_len = fb_res->end - fb_res->start + 1;
++
++ fb = ioremap_writecombine(fb_res->start, fb_len);
++ if (fb) {
++ memset(fb, 0, fb_len);
++ iounmap(fb, fb_len);
++ }
++ }
++#endif
++
+ lcdc_data = *data;
+ platform_device_register(&at91_lcdc_device);
+ }
+diff -Nrup linux-2.6.24/arch/arm/mach-at91/at91sam9rl_devices.c linux-avr32/arch/arm/mach-at91/at91sam9rl_devices.c
+--- linux-2.6.24/arch/arm/mach-at91/at91sam9rl_devices.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/arm/mach-at91/at91sam9rl_devices.c 2008-02-01 14:51:35.000000000 -0500
+@@ -375,6 +375,20 @@ void __init at91_add_device_lcdc(struct
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
+
++#ifdef CONFIG_FB_INTSRAM
++ {
++ void __iomem *fb;
++ struct resource *fb_res = &lcdc_resources[2];
++ size_t fb_len = fb_res->end - fb_res->start + 1;
++
++ fb = ioremap_writecombine(fb_res->start, fb_len);
++ if (fb) {
++ memset(fb, 0, fb_len);
++ iounmap(fb, fb_len);
++ }
++ }
++#endif
++
+ lcdc_data = *data;
+ platform_device_register(&at91_lcdc_device);
+ }
+diff -Nrup linux-2.6.24/arch/avr32/boards/atngw100/Kconfig linux-avr32/arch/avr32/boards/atngw100/Kconfig
+--- linux-2.6.24/arch/avr32/boards/atngw100/Kconfig 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/boards/atngw100/Kconfig 2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,12 @@
++# NGW100 customization
++
++config BOARD_ATNGW100_I2C_GPIO
++ bool "Use GPIO for i2c instead of built-in TWI module"
++ help
++ The driver for the built-in TWI module has been plagued by
++ various problems, while the i2c-gpio driver is based on the
++ trusty old i2c-algo-bit bitbanging engine, making it work
++ on pretty much any setup.
++
++ Choose 'Y' here if you're having i2c-related problems and
++ want to rule out the i2c bus driver.
+diff -Nrup linux-2.6.24/arch/avr32/boards/atngw100/setup.c linux-avr32/arch/avr32/boards/atngw100/setup.c
+--- linux-2.6.24/arch/avr32/boards/atngw100/setup.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/boards/atngw100/setup.c 2008-02-01 14:51:35.000000000 -0500
+@@ -20,7 +20,7 @@
+ #include <asm/io.h>
+ #include <asm/setup.h>
+
+-#include <asm/arch/at32ap7000.h>
++#include <asm/arch/at32ap700x.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/init.h>
+ #include <asm/arch/portmux.h>
+@@ -42,6 +42,11 @@ static struct spi_board_info spi0_board_
+ },
+ };
+
++static struct mci_platform_data __initdata mci0_data = {
++ .detect_pin = GPIO_PIN_PC(25),
++ .wp_pin = GPIO_PIN_PE(0),
++};
++
+ /*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+@@ -124,6 +129,7 @@ static struct platform_device ngw_gpio_l
+ }
+ };
+
++#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
+ static struct i2c_gpio_platform_data i2c_gpio_data = {
+ .sda_pin = GPIO_PIN_PA(6),
+ .scl_pin = GPIO_PIN_PA(7),
+@@ -139,6 +145,7 @@ static struct platform_device i2c_gpio_d
+ .platform_data = &i2c_gpio_data,
+ },
+ };
++#endif
+
+ static int __init atngw100_init(void)
+ {
+@@ -157,6 +164,7 @@ static int __init atngw100_init(void)
+ set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
+
+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++ at32_add_device_mci(0, &mci0_data);
+ at32_add_device_usba(0, NULL);
+
+ for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
+@@ -165,11 +173,15 @@ static int __init atngw100_init(void)
+ }
+ platform_device_register(&ngw_gpio_leds);
+
++#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
+ at32_select_gpio(i2c_gpio_data.sda_pin,
+ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ at32_select_gpio(i2c_gpio_data.scl_pin,
+ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ platform_device_register(&i2c_gpio_device);
++#else
++ at32_add_device_twi(0);
++#endif
+
+ return 0;
+ }
+diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/atstk1000.h linux-avr32/arch/avr32/boards/atstk1000/atstk1000.h
+--- linux-2.6.24/arch/avr32/boards/atstk1000/atstk1000.h 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/boards/atstk1000/atstk1000.h 2008-02-01 14:51:35.000000000 -0500
+@@ -12,4 +12,6 @@
+
+ extern struct atmel_lcdfb_info atstk1000_lcdc_data;
+
++void atstk1000_setup_j2_leds(void);
++
+ #endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */
+diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/atstk1002.c linux-avr32/arch/avr32/boards/atstk1000/atstk1002.c
+--- linux-2.6.24/arch/avr32/boards/atstk1000/atstk1002.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/boards/atstk1000/atstk1002.c 2008-02-01 14:51:35.000000000 -0500
+@@ -11,7 +11,6 @@
+ #include <linux/etherdevice.h>
+ #include <linux/init.h>
+ #include <linux/kernel.h>
+-#include <linux/leds.h>
+ #include <linux/platform_device.h>
+ #include <linux/string.h>
+ #include <linux/types.h>
+@@ -22,7 +21,7 @@
+
+ #include <asm/io.h>
+ #include <asm/setup.h>
+-#include <asm/arch/at32ap7000.h>
++#include <asm/arch/at32ap700x.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/init.h>
+ #include <asm/arch/portmux.h>
+@@ -49,18 +48,16 @@ static struct eth_platform_data __initda
+ },
+ };
+
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+ static struct at73c213_board_info at73c213_data = {
+ .ssc_id = 0,
+ .shortname = "AVR32 STK1000 external DAC",
+ };
+ #endif
+-#endif
+
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
+ static struct spi_board_info spi0_board_info[] __initdata = {
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+ {
+ /* AT73C213 */
+ .modalias = "at73c213",
+@@ -80,12 +77,25 @@ static struct spi_board_info spi0_board_
+ };
+ #endif
+
+-#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
+ static struct spi_board_info spi1_board_info[] __initdata = { {
+ /* patch in custom entries here */
+ } };
+ #endif
+
++static struct cf_platform_data __initdata cf0_data = {
++#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
++ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
++ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
++#else
++ .detect_pin = GPIO_PIN_NONE,
++ .reset_pin = GPIO_PIN_NONE,
++#endif
++ .vcc_pin = GPIO_PIN_NONE,
++ .ready_pin = GPIO_PIN_PB(27),
++ .cs = 4,
++};
++
+ /*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+@@ -141,68 +151,8 @@ static void __init set_hw_addr(struct pl
+ clk_put(pclk);
+ }
+
+-#ifdef CONFIG_BOARD_ATSTK1002_J2_LED
+-
+-static struct gpio_led stk_j2_led[] = {
+-#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8
+-#define LEDSTRING "J2 jumpered to LED8"
+- { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
+- { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
+- { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
+- { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
+- { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
+- { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
+- { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
+- { .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
+- .default_trigger = "heartbeat", },
+-#else /* RGB */
+-#define LEDSTRING "J2 jumpered to RGB LEDs"
+- { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), },
+- { .name = "g1:green", .gpio = GPIO_PIN_PB(10), },
+- { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), },
+-
+- { .name = "r2:red", .gpio = GPIO_PIN_PB( 9),
+- .default_trigger = "heartbeat", },
+- { .name = "g2:green", .gpio = GPIO_PIN_PB(13), },
+- { .name = "b2:blue", .gpio = GPIO_PIN_PB(15),
+- .default_trigger = "heartbeat", },
+- /* PB16, PB30 unused */
+-#endif
+-};
+-
+-static struct gpio_led_platform_data stk_j2_led_data = {
+- .num_leds = ARRAY_SIZE(stk_j2_led),
+- .leds = stk_j2_led,
+-};
+-
+-static struct platform_device stk_j2_led_dev = {
+- .name = "leds-gpio",
+- .id = 2, /* gpio block J2 */
+- .dev = {
+- .platform_data = &stk_j2_led_data,
+- },
+-};
+-
+-static void setup_j2_leds(void)
+-{
+- unsigned i;
+-
+- for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++)
+- at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
+-
+- printk("STK1002: " LEDSTRING "\n");
+- platform_device_register(&stk_j2_led_dev);
+-}
+-
+-#else
+-static void setup_j2_leds(void)
+-{
+-}
+-#endif
+-
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
+-static void __init at73c213_set_clk(struct at73c213_board_info *info)
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static void __init atstk1002_setup_extdac(void)
+ {
+ struct clk *gclk;
+ struct clk *pll;
+@@ -220,7 +170,7 @@ static void __init at73c213_set_clk(stru
+ }
+
+ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+- info->dac_clk = gclk;
++ at73c213_data.dac_clk = gclk;
+
+ err_set_clk:
+ clk_put(pll);
+@@ -229,12 +179,16 @@ err_pll:
+ err_gclk:
+ return;
+ }
+-#endif
+-#endif
++#else
++static void __init atstk1002_setup_extdac(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
+
+ void __init setup_board(void)
+ {
+-#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
+ #else
+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+@@ -271,7 +225,7 @@ static int __init atstk1002_init(void)
+
+ at32_add_system_devices();
+
+-#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+ at32_add_device_usart(1);
+ #else
+ at32_add_device_usart(0);
+@@ -281,12 +235,16 @@ static int __init atstk1002_init(void)
+ #ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
+ set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+ #endif
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+ #endif
+-#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
+ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
+ #endif
++ at32_add_device_twi(0);
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_add_device_mci(0, NULL);
++#endif
+ #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
+ set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
+ #else
+@@ -294,17 +252,18 @@ static int __init atstk1002_init(void)
+ fbmem_start, fbmem_size);
+ #endif
+ at32_add_device_usba(0, NULL);
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++ at32_add_device_ac97c(0);
++#else
++ at32_add_device_abdac(0);
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
+ at32_add_device_ssc(0, ATMEL_SSC_TX);
+ #endif
++ at32_add_device_cf(0, 2, &cf0_data);
+
+- setup_j2_leds();
+-
+-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
+-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
+- at73c213_set_clk(&at73c213_data);
+-#endif
+-#endif
++ atstk1000_setup_j2_leds();
++ atstk1002_setup_extdac();
+
+ return 0;
+ }
+diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/atstk1003.c linux-avr32/arch/avr32/boards/atstk1000/atstk1003.c
+--- linux-2.6.24/arch/avr32/boards/atstk1000/atstk1003.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/boards/atstk1000/atstk1003.c 2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,181 @@
++/*
++ * ATSTK1003 daughterboard-specific init code
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/string.h>
++#include <linux/types.h>
++
++#include <linux/spi/at73c213.h>
++#include <linux/spi/spi.h>
++
++#include <asm/setup.h>
++
++#include <asm/arch/at32ap700x.h>
++#include <asm/arch/board.h>
++#include <asm/arch/init.h>
++#include <asm/arch/portmux.h>
++
++#include "atstk1000.h"
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static struct at73c213_board_info at73c213_data = {
++ .ssc_id = 0,
++ .shortname = "AVR32 STK1000 external DAC",
++};
++#endif
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++static struct spi_board_info spi0_board_info[] __initdata = {
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++ {
++ /* AT73C213 */
++ .modalias = "at73c213",
++ .max_speed_hz = 200000,
++ .chip_select = 0,
++ .mode = SPI_MODE_1,
++ .platform_data = &at73c213_data,
++ },
++#endif
++ /*
++ * We can control the LTV350QV LCD panel, but it isn't much
++ * point since we don't have an LCD controller...
++ */
++};
++#endif
++
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++static struct spi_board_info spi1_board_info[] __initdata = { {
++ /* patch in custom entries here */
++} };
++#endif
++
++static struct cf_platform_data __initdata cf0_data = {
++#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
++ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
++ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
++#else
++ .detect_pin = GPIO_PIN_NONE,
++ .reset_pin = GPIO_PIN_NONE,
++#endif
++ .vcc_pin = GPIO_PIN_NONE,
++ .ready_pin = GPIO_PIN_PB(27),
++ .cs = 4,
++};
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static void __init atstk1003_setup_extdac(void)
++{
++ struct clk *gclk;
++ struct clk *pll;
++
++ gclk = clk_get(NULL, "gclk0");
++ if (IS_ERR(gclk))
++ goto err_gclk;
++ pll = clk_get(NULL, "pll0");
++ if (IS_ERR(pll))
++ goto err_pll;
++
++ if (clk_set_parent(gclk, pll)) {
++ pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
++ goto err_set_clk;
++ }
++
++ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++ at73c213_data.dac_clk = gclk;
++
++err_set_clk:
++ clk_put(pll);
++err_pll:
++ clk_put(gclk);
++err_gclk:
++ return;
++}
++#else
++static void __init atstk1003_setup_extdac(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
++
++void __init setup_board(void)
++{
++#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
++#else
++ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
++#endif
++ /* USART 2/unused: expansion connector */
++ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
++
++ at32_setup_serial_console(0);
++}
++
++static int __init atstk1003_init(void)
++{
++ /*
++ * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
++ * SDRAM-specific pins so that nobody messes with them.
++ */
++ at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */
++ at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */
++ at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */
++ at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */
++ at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */
++ at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */
++ at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */
++ at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */
++ at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */
++ at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */
++ at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */
++ at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */
++ at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */
++ at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */
++ at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */
++ at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */
++ at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */
++
++ at32_add_system_devices();
++
++#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_add_device_usart(1);
++#else
++ at32_add_device_usart(0);
++#endif
++ at32_add_device_usart(2);
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++#endif
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_add_device_mci(0, NULL);
++#endif
++ at32_add_device_usba(0, NULL);
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++ at32_add_device_ac97c(0);
++#else
++ at32_add_device_abdac(0);
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
++ at32_add_device_ssc(0, ATMEL_SSC_TX);
++#endif
++ at32_add_device_cf(0, 2, &cf0_data);
++
++ atstk1000_setup_j2_leds();
++ atstk1003_setup_extdac();
++
++ return 0;
++}
++postcore_initcall(atstk1003_init);
+diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/atstk1004.c linux-avr32/arch/avr32/boards/atstk1000/atstk1004.c
+--- linux-2.6.24/arch/avr32/boards/atstk1000/atstk1004.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/boards/atstk1000/atstk1004.c 2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,152 @@
++/*
++ * ATSTK1003 daughterboard-specific init code
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/string.h>
++#include <linux/types.h>
++
++#include <linux/spi/at73c213.h>
++#include <linux/spi/spi.h>
++
++#include <video/atmel_lcdc.h>
++
++#include <asm/setup.h>
++
++#include <asm/arch/at32ap700x.h>
++#include <asm/arch/board.h>
++#include <asm/arch/init.h>
++#include <asm/arch/portmux.h>
++
++#include "atstk1000.h"
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static struct at73c213_board_info at73c213_data = {
++ .ssc_id = 0,
++ .shortname = "AVR32 STK1000 external DAC",
++};
++#endif
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++static struct spi_board_info spi0_board_info[] __initdata = {
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++ {
++ /* AT73C213 */
++ .modalias = "at73c213",
++ .max_speed_hz = 200000,
++ .chip_select = 0,
++ .mode = SPI_MODE_1,
++ .platform_data = &at73c213_data,
++ },
++#endif
++ {
++ /* QVGA display */
++ .modalias = "ltv350qv",
++ .max_speed_hz = 16000000,
++ .chip_select = 1,
++ .mode = SPI_MODE_3,
++ },
++};
++#endif
++
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++static struct spi_board_info spi1_board_info[] __initdata = { {
++ /* patch in custom entries here */
++} };
++#endif
++
++#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
++static void __init atstk1004_setup_extdac(void)
++{
++ struct clk *gclk;
++ struct clk *pll;
++
++ gclk = clk_get(NULL, "gclk0");
++ if (IS_ERR(gclk))
++ goto err_gclk;
++ pll = clk_get(NULL, "pll0");
++ if (IS_ERR(pll))
++ goto err_pll;
++
++ if (clk_set_parent(gclk, pll)) {
++ pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
++ goto err_set_clk;
++ }
++
++ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++ at73c213_data.dac_clk = gclk;
++
++err_set_clk:
++ clk_put(pll);
++err_pll:
++ clk_put(gclk);
++err_gclk:
++ return;
++}
++#else
++static void __init atstk1004_setup_extdac(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
++
++void __init setup_board(void)
++{
++#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
++#else
++ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
++#endif
++ /* USART 2/unused: expansion connector */
++ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
++
++ at32_setup_serial_console(0);
++}
++
++static int __init atstk1004_init(void)
++{
++ at32_add_system_devices();
++
++#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_add_device_usart(1);
++#else
++ at32_add_device_usart(0);
++#endif
++ at32_add_device_usart(2);
++
++#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
++ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++#endif
++#ifdef CONFIG_BOARD_ATSTK100X_SPI1
++ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_add_device_mci(0, NULL);
++#endif
++ at32_add_device_lcdc(0, &atstk1000_lcdc_data,
++ fbmem_start, fbmem_size);
++ at32_add_device_usba(0, NULL);
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++ at32_add_device_ac97c(0);
++#else
++ at32_add_device_abdac(0);
++#endif
++#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
++ at32_add_device_ssc(0, ATMEL_SSC_TX);
++#endif
++
++ atstk1000_setup_j2_leds();
++ atstk1004_setup_extdac();
++
++ return 0;
++}
++postcore_initcall(atstk1004_init);
+diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/Kconfig linux-avr32/arch/avr32/boards/atstk1000/Kconfig
+--- linux-2.6.24/arch/avr32/boards/atstk1000/Kconfig 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/boards/atstk1000/Kconfig 2008-02-01 14:51:35.000000000 -0500
+@@ -1,34 +1,53 @@
+ # STK1000 customization
+
+-if BOARD_ATSTK1002
++if BOARD_ATSTK1000
+
+-config BOARD_ATSTK1002_CUSTOM
+- bool "Non-default STK-1002 jumper settings"
++choice
++ prompt "ATSTK1000 CPU daughterboard type"
++ default BOARD_ATSTK1002
++
++config BOARD_ATSTK1002
++ bool "ATSTK1002"
++ select CPU_AT32AP7000
++
++config BOARD_ATSTK1003
++ bool "ATSTK1003"
++ select CPU_AT32AP7001
++
++config BOARD_ATSTK1004
++ bool "ATSTK1004"
++ select CPU_AT32AP7002
++
++endchoice
++
++
++config BOARD_ATSTK100X_CUSTOM
++ bool "Non-default STK1002/STK1003/STK1004 jumper settings"
+ help
+ You will normally leave the jumpers on the CPU card at their
+ default settings. If you need to use certain peripherals,
+ you will need to change some of those jumpers.
+
+-if BOARD_ATSTK1002_CUSTOM
++if BOARD_ATSTK100X_CUSTOM
+
+-config BOARD_ATSTK1002_SW1_CUSTOM
++config BOARD_ATSTK100X_SW1_CUSTOM
+ bool "SW1: use SSC1 (not SPI0)"
+ help
+ This also prevents using the external DAC as an audio interface,
+ and means you can't initialize the on-board QVGA display.
+
+-config BOARD_ATSTK1002_SW2_CUSTOM
++config BOARD_ATSTK100X_SW2_CUSTOM
+ bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
+ help
+ If you change this you'll want an updated boot loader putting
+ the console on UART-C not UART-A.
+
+-config BOARD_ATSTK1002_SW3_CUSTOM
++config BOARD_ATSTK100X_SW3_CUSTOM
+ bool "SW3: use TIMER1 (not SSC0 and GCLK)"
+ help
+ This also prevents using the external DAC as an audio interface.
+
+-config BOARD_ATSTK1002_SW4_CUSTOM
++config BOARD_ATSTK100X_SW4_CUSTOM
+ bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
+ help
+ To use the camera interface you'll need a custom card (on the
+@@ -36,27 +55,29 @@ config BOARD_ATSTK1002_SW4_CUSTOM
+
+ config BOARD_ATSTK1002_SW5_CUSTOM
+ bool "SW5: use MACB1 (not LCDC)"
++ depends on BOARD_ATSTK1002
+
+ config BOARD_ATSTK1002_SW6_CUSTOM
+ bool "SW6: more GPIOs (not MACB0)"
++ depends on BOARD_ATSTK1002
+
+ endif # custom
+
+-config BOARD_ATSTK1002_SPI1
++config BOARD_ATSTK100X_SPI1
+ bool "Configure SPI1 controller"
+- depends on !BOARD_ATSTK1002_SW4_CUSTOM
++ depends on !BOARD_ATSTK100X_SW4_CUSTOM
+ help
+ All the signals for the second SPI controller are available on
+ GPIO lines and accessed through the J1 jumper block. Say "y"
+ here to configure that SPI controller.
+
+-config BOARD_ATSTK1002_J2_LED
++config BOARD_ATSTK1000_J2_LED
+ bool
+- default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
++ default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB
+
+ choice
+ prompt "LEDs connected to J2:"
+- depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM
++ depends on LEDS_GPIO && !BOARD_ATSTK100X_SW4_CUSTOM
+ optional
+ help
+ Select this if you have jumpered the J2 jumper block to the
+@@ -64,16 +85,64 @@ choice
+ IDC cable. A default "heartbeat" trigger is provided, but
+ you can of course override this.
+
+-config BOARD_ATSTK1002_J2_LED8
++config BOARD_ATSTK1000_J2_LED8
+ bool "LED0..LED7"
+ help
+ Select this if J2 is jumpered to LED0..LED7 amber leds.
+
+-config BOARD_ATSTK1002_J2_RGB
++config BOARD_ATSTK1000_J2_RGB
+ bool "RGB leds"
+ help
+ Select this if J2 is jumpered to the RGB leds.
+
+ endchoice
+
+-endif # stk 1002
++config BOARD_ATSTK1000_EXTDAC
++ bool
++ depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
++ default y
++
++config BOARD_ATSTK100X_ENABLE_AC97
++ bool "Use AC97C instead of ABDAC"
++ help
++ Select this if you want to use the built-in AC97 controller
++ instead of the built-in Audio Bitstream DAC. These share
++ the same I/O pins on the AP7000, so both can't be enabled
++ at the same time.
++
++ Note that the STK1000 kit doesn't ship with an AC97 codec on
++ board, so say N unless you've got an expansion board with an
++ AC97 codec on it that you want to use.
++
++config BOARD_ATSTK1000_CF_HACKS
++ bool "ATSTK1000 CompactFlash hacks"
++ depends on !BOARD_ATSTK100X_SW4_CUSTOM
++ help
++ Select this if you have re-routed the CompactFlash RESET and
++ CD signals to GPIOs on your STK1000. This is necessary for
++ reset and card detection to work properly, although some CF
++ cards may be able to cope without reset.
++
++config BOARD_ATSTK1000_CF_RESET_PIN
++ hex "CompactFlash RESET pin"
++ default 0x30
++ depends on BOARD_ATSTK1000_CF_HACKS
++ help
++ Select which GPIO pin to use for the CompactFlash RESET
++ signal. This is specified as a hexadecimal number and should
++ be defined as 0x20 * gpio_port + pin.
++
++ The default is 0x30, which is pin 16 on PIOB, aka GPIO14.
++
++config BOARD_ATSTK1000_CF_DETECT_PIN
++ hex "CompactFlash DETECT pin"
++ default 0x3e
++ depends on BOARD_ATSTK1000_CF_HACKS
++ help
++ Select which GPIO pin to use for the CompactFlash CD
++ signal. This is specified as a hexadecimal number and should
++ be defined as 0x20 * gpio_port + pin.
++
++ The default is 0x3e, which is pin 30 on PIOB, aka GPIO15.
++
++endif # stk 1000
+diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/Makefile linux-avr32/arch/avr32/boards/atstk1000/Makefile
+--- linux-2.6.24/arch/avr32/boards/atstk1000/Makefile 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/boards/atstk1000/Makefile 2008-02-01 14:51:35.000000000 -0500
+@@ -1,2 +1,4 @@
+ obj-y += setup.o flash.o
+ obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o
++obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o
++obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o
+diff -Nrup linux-2.6.24/arch/avr32/boards/atstk1000/setup.c linux-avr32/arch/avr32/boards/atstk1000/setup.c
+--- linux-2.6.24/arch/avr32/boards/atstk1000/setup.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/boards/atstk1000/setup.c 2008-02-01 14:51:35.000000000 -0500
+@@ -10,13 +10,17 @@
+ #include <linux/bootmem.h>
+ #include <linux/fb.h>
+ #include <linux/init.h>
++#include <linux/platform_device.h>
+ #include <linux/types.h>
+ #include <linux/linkage.h>
+
+ #include <video/atmel_lcdc.h>
+
+ #include <asm/setup.h>
++
++#include <asm/arch/at32ap700x.h>
+ #include <asm/arch/board.h>
++#include <asm/arch/portmux.h>
+
+ #include "atstk1000.h"
+
+@@ -61,3 +65,63 @@ struct atmel_lcdfb_info __initdata atstk
+ .default_monspecs = &atstk1000_default_monspecs,
+ .guard_time = 2,
+ };
++
++#ifdef CONFIG_BOARD_ATSTK1000_J2_LED
++#include <linux/leds.h>
++
++static struct gpio_led stk1000_j2_led[] = {
++#ifdef CONFIG_BOARD_ATSTK1000_J2_LED8
++#define LEDSTRING "J2 jumpered to LED8"
++ { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
++ { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
++ { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
++ { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
++ { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
++ { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
++ { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
++ { .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
++ .default_trigger = "heartbeat", },
++#else /* RGB */
++#define LEDSTRING "J2 jumpered to RGB LEDs"
++ { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), },
++ { .name = "g1:green", .gpio = GPIO_PIN_PB(10), },
++ { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), },
++
++ { .name = "r2:red", .gpio = GPIO_PIN_PB( 9),
++ .default_trigger = "heartbeat", },
++ { .name = "g2:green", .gpio = GPIO_PIN_PB(13), },
++ { .name = "b2:blue", .gpio = GPIO_PIN_PB(15),
++ .default_trigger = "heartbeat", },
++ /* PB16, PB30 unused */
++#endif
++};
++
++static struct gpio_led_platform_data stk1000_j2_led_data = {
++ .num_leds = ARRAY_SIZE(stk1000_j2_led),
++ .leds = stk1000_j2_led,
++};
++
++static struct platform_device stk1000_j2_led_dev = {
++ .name = "leds-gpio",
++ .id = 2, /* gpio block J2 */
++ .dev = {
++ .platform_data = &stk1000_j2_led_data,
++ },
++};
++
++void __init atstk1000_setup_j2_leds(void)
++{
++ unsigned i;
++
++ for (i = 0; i < ARRAY_SIZE(stk1000_j2_led); i++)
++ at32_select_gpio(stk1000_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
++
++ printk("STK1000: " LEDSTRING "\n");
++ platform_device_register(&stk1000_j2_led_dev);
++}
++#else /* CONFIG_BOARD_ATSTK1000_J2_LED */
++void __init atstk1000_setup_j2_leds(void)
++{
++
++}
++#endif /* CONFIG_BOARD_ATSTK1000_J2_LED */
+diff -Nrup linux-2.6.24/arch/avr32/configs/atngw100_defconfig linux-avr32/arch/avr32/configs/atngw100_defconfig
+--- linux-2.6.24/arch/avr32/configs/atngw100_defconfig 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/configs/atngw100_defconfig 2008-02-01 14:51:35.000000000 -0500
+@@ -1,46 +1,51 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.22-rc5
+-# Sat Jun 23 15:40:05 2007
++# Linux kernel version: 2.6.24-rc7
++# Wed Jan 9 23:20:41 2008
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+ CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
+ CONFIG_GENERIC_TIME=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+ # CONFIG_ARCH_HAS_ILOG2_U32 is not set
+ # CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_ARCH_SUPPORTS_OPROFILE=y
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
+ CONFIG_GENERIC_BUG=y
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+ #
+-# Code maturity level options
++# General setup
+ #
+ CONFIG_EXPERIMENTAL=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+-
+-#
+-# General setup
+-#
+ CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SWAP=y
+ CONFIG_SYSVIPC=y
+-# CONFIG_IPC_NS is not set
+ CONFIG_SYSVIPC_SYSCTL=y
+ CONFIG_POSIX_MQUEUE=y
+ CONFIG_BSD_PROCESS_ACCT=y
+ CONFIG_BSD_PROCESS_ACCT_V3=y
+ # CONFIG_TASKSTATS is not set
+-# CONFIG_UTS_NS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
+ # CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ # CONFIG_RELAY is not set
+ CONFIG_BLK_DEV_INITRD=y
+@@ -61,35 +66,28 @@ CONFIG_FUTEX=y
+ CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+ CONFIG_VM_EVENT_COUNTERS=y
+-# CONFIG_SLUB_DEBUG is not set
++CONFIG_SLUB_DEBUG=y
+ # CONFIG_SLAB is not set
+ CONFIG_SLUB=y
+ # CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=1
+-
+-#
+-# Loadable module support
+-#
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+ CONFIG_MODULE_FORCE_UNLOAD=y
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+ CONFIG_KMOD=y
+-
+-#
+-# Block layer
+-#
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+ # CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
+
+ #
+ # IO Schedulers
+@@ -111,6 +109,7 @@ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
+ CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
+ CONFIG_CPU_AT32AP7000=y
+ # CONFIG_BOARD_ATSTK1000 is not set
+ CONFIG_BOARD_ATNGW100=y
+@@ -119,9 +118,9 @@ CONFIG_LOADER_U_BOOT=y
+ #
+ # Atmel AVR32 AP options
+ #
+-# CONFIG_AP7000_32_BIT_SMC is not set
+-CONFIG_AP7000_16_BIT_SMC=y
+-# CONFIG_AP7000_8_BIT_SMC is not set
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
+ CONFIG_LOAD_ADDRESS=0x10000000
+ CONFIG_ENTRY_ADDRESS=0x90000000
+ CONFIG_PHYS_OFFSET=0x10000000
+@@ -141,9 +140,11 @@ CONFIG_FLATMEM_MANUAL=y
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+ # CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+ # CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
+ # CONFIG_OWNERSHIP_TRACE is not set
+ # CONFIG_HZ_100 is not set
+ CONFIG_HZ_250=y
+@@ -153,13 +154,31 @@ CONFIG_HZ=250
+ CONFIG_CMDLINE=""
+
+ #
+-# Bus options
++# Power management options
+ #
+-# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+ #
+-# PCCARD (PCMCIA/CardBus) support
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
+ #
++# CONFIG_ARCH_SUPPORTS_MSI is not set
+ # CONFIG_PCCARD is not set
+
+ #
+@@ -213,6 +232,7 @@ CONFIG_INET_TUNNEL=y
+ CONFIG_INET_XFRM_MODE_TRANSPORT=y
+ CONFIG_INET_XFRM_MODE_TUNNEL=y
+ CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
+ CONFIG_INET_DIAG=y
+ CONFIG_INET_TCP_DIAG=y
+ # CONFIG_TCP_CONG_ADVANCED is not set
+@@ -240,6 +260,7 @@ CONFIG_IPV6_SIT=y
+ # CONFIG_NETWORK_SECMARK is not set
+ CONFIG_NETFILTER=y
+ # CONFIG_NETFILTER_DEBUG is not set
++CONFIG_BRIDGE_NETFILTER=y
+
+ #
+ # Core Netfilter Configuration
+@@ -252,6 +273,7 @@ CONFIG_NF_CONNTRACK_MARK=y
+ # CONFIG_NF_CONNTRACK_EVENTS is not set
+ CONFIG_NF_CT_PROTO_GRE=m
+ # CONFIG_NF_CT_PROTO_SCTP is not set
++# CONFIG_NF_CT_PROTO_UDPLITE is not set
+ CONFIG_NF_CONNTRACK_AMANDA=m
+ CONFIG_NF_CONNTRACK_FTP=m
+ CONFIG_NF_CONNTRACK_H323=m
+@@ -269,9 +291,11 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
+ CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+ CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+ # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
++# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+ CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+ CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
++# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+ CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+ # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+@@ -284,6 +308,7 @@ CONFIG_NETFILTER_XT_MATCH_MAC=m
+ CONFIG_NETFILTER_XT_MATCH_MARK=m
+ CONFIG_NETFILTER_XT_MATCH_POLICY=m
+ CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+ CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+ CONFIG_NETFILTER_XT_MATCH_REALM=m
+@@ -292,6 +317,8 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m
+ CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+ CONFIG_NETFILTER_XT_MATCH_STRING=m
+ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
++# CONFIG_NETFILTER_XT_MATCH_TIME is not set
++# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+ CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+ #
+@@ -359,13 +386,19 @@ CONFIG_IP6_NF_TARGET_REJECT=m
+ CONFIG_IP6_NF_MANGLE=m
+ CONFIG_IP6_NF_TARGET_HL=m
+ CONFIG_IP6_NF_RAW=m
++
++#
++# Bridge: Netfilter Configuration
++#
++# CONFIG_BRIDGE_NF_EBTABLES is not set
+ # CONFIG_IP_DCCP is not set
+ # CONFIG_IP_SCTP is not set
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
++CONFIG_BRIDGE=m
+ CONFIG_VLAN_8021Q=m
+ # CONFIG_DECNET is not set
++CONFIG_LLC=m
+ # CONFIG_LLC2 is not set
+ # CONFIG_IPX is not set
+ # CONFIG_ATALK is not set
+@@ -373,10 +406,6 @@ CONFIG_VLAN_8021Q=m
+ # CONFIG_LAPB is not set
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+-
+-#
+-# QoS and/or fair queueing
+-#
+ # CONFIG_NET_SCHED is not set
+ CONFIG_NET_CLS_ROUTE=y
+
+@@ -384,6 +413,7 @@ CONFIG_NET_CLS_ROUTE=y
+ # Network testing
+ #
+ # CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_TCPPROBE is not set
+ # CONFIG_HAMRADIO is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+@@ -397,6 +427,7 @@ CONFIG_NET_CLS_ROUTE=y
+ # CONFIG_MAC80211 is not set
+ # CONFIG_IEEE80211 is not set
+ # CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
+
+ #
+ # Device Drivers
+@@ -405,16 +436,13 @@ CONFIG_NET_CLS_ROUTE=y
+ #
+ # Generic Driver Options
+ #
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+ CONFIG_STANDALONE=y
+ # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+-
+-#
+-# Connector - unified userspace <-> kernelspace linker
+-#
+ # CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
+ # CONFIG_MTD_DEBUG is not set
+@@ -434,6 +462,7 @@ CONFIG_MTD_BLOCK=y
+ # CONFIG_INFTL is not set
+ # CONFIG_RFD_FTL is not set
+ # CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
+
+ #
+ # RAM/ROM/Flash chip drivers
+@@ -493,20 +522,8 @@ CONFIG_MTD_DATAFLASH=y
+ # UBI - Unsorted block images
+ #
+ # CONFIG_MTD_UBI is not set
+-
+-#
+-# Parallel port support
+-#
+ # CONFIG_PARPORT is not set
+-
+-#
+-# Plug and Play support
+-#
+-# CONFIG_PNPACPI is not set
+-
+-#
+-# Block devices
+-#
++CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=m
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+@@ -517,11 +534,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-
+-#
+-# Misc devices
+-#
+-# CONFIG_BLINK is not set
++# CONFIG_MISC_DEVICES is not set
+ # CONFIG_IDE is not set
+
+ #
+@@ -529,30 +542,42 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ #
+ # CONFIG_RAID_ATTRS is not set
+ # CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
+ # CONFIG_SCSI_NETLINK is not set
+ # CONFIG_ATA is not set
+-
+-#
+-# Multi-device support (RAID and LVM)
+-#
+ # CONFIG_MD is not set
+-
+-#
+-# Network device support
+-#
+ CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
+ # CONFIG_DUMMY is not set
+ # CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
+ # CONFIG_EQUALIZER is not set
+ CONFIG_TUN=m
+-# CONFIG_PHYLIB is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
+
+ #
+-# Ethernet (10 or 100Mbit)
++# MII PHY device drivers
+ #
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
+ CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
++# CONFIG_MII is not set
+ CONFIG_MACB=y
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+
+@@ -571,21 +596,14 @@ CONFIG_PPP_DEFLATE=m
+ CONFIG_PPP_BSDCOMP=m
+ CONFIG_PPP_MPPE=m
+ CONFIG_PPPOE=m
++# CONFIG_PPPOL2TP is not set
+ # CONFIG_SLIP is not set
+ CONFIG_SLHC=m
+ # CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+-
+-#
+-# ISDN subsystem
+-#
+ # CONFIG_ISDN is not set
+-
+-#
+-# Telephony Support
+-#
+ # CONFIG_PHONE is not set
+
+ #
+@@ -620,23 +638,50 @@ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ CONFIG_UNIX98_PTYS=y
+ # CONFIG_LEGACY_PTYS is not set
+-
+-#
+-# IPMI
+-#
+ # CONFIG_IPMI_HANDLER is not set
+-# CONFIG_WATCHDOG is not set
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_RTC is not set
+ # CONFIG_GEN_RTC is not set
+ # CONFIG_R3964 is not set
+ # CONFIG_RAW_DRIVER is not set
+-
+-#
+-# TPM devices
+-#
+ # CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
+
+ #
+ # SPI support
+@@ -655,13 +700,25 @@ CONFIG_SPI_ATMEL=y
+ # SPI Protocol Masters
+ #
+ # CONFIG_SPI_AT25 is not set
+-# CONFIG_SPI_SPIDEV is not set
++CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+ #
+-# Dallas's 1-wire bus
++# Watchdog Device Drivers
+ #
+-# CONFIG_W1 is not set
+-# CONFIG_HWMON is not set
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
+
+ #
+ # Multifunction device drivers
+@@ -678,23 +735,21 @@ CONFIG_SPI_ATMEL=y
+ #
+ # Graphics support
+ #
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
+ # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+ #
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
+-# CONFIG_VGASTATE is not set
+-# CONFIG_FB is not set
+
+ #
+ # Sound
+ #
+ # CONFIG_SOUND is not set
+-
+-#
+-# USB support
+-#
++CONFIG_USB_SUPPORT=y
+ # CONFIG_USB_ARCH_HAS_HCD is not set
+ # CONFIG_USB_ARCH_HAS_OHCI is not set
+ # CONFIG_USB_ARCH_HAS_EHCI is not set
+@@ -706,12 +761,47 @@ CONFIG_SPI_ATMEL=y
+ #
+ # USB Gadget Support
+ #
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=m
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=m
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
+
+ #
+-# LED devices
++# MMC/SD Host Controller Drivers
+ #
++CONFIG_MMC_SPI=m
+ CONFIG_NEW_LEDS=y
+ CONFIG_LEDS_CLASS=y
+
+@@ -726,53 +816,71 @@ CONFIG_LEDS_GPIO=y
+ CONFIG_LEDS_TRIGGERS=y
+ CONFIG_LEDS_TRIGGER_TIMER=y
+ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+-
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
+
+ #
+-# LED drivers
+-#
+-
+-#
+-# LED Triggers
+-#
+-
+-#
+-# InfiniBand support
++# RTC interfaces
+ #
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
+
+ #
+-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
++# I2C RTC drivers
+ #
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
+
+ #
+-# Real Time Clock
++# SPI RTC drivers
+ #
+-# CONFIG_RTC_CLASS is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
+
+ #
+-# DMA Engine support
++# Platform RTC drivers
+ #
+-# CONFIG_DMA_ENGINE is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
+
+ #
+-# DMA Clients
++# on-CPU RTC drivers
+ #
++CONFIG_RTC_DRV_AT32AP700X=y
+
+ #
+-# DMA Devices
++# Userspace I/O
+ #
++# CONFIG_UIO is not set
+
+ #
+ # File systems
+ #
+-CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS=m
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS=m
+ # CONFIG_EXT3_FS_XATTR is not set
+ # CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-# CONFIG_JBD_DEBUG is not set
++CONFIG_JBD=m
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+@@ -781,7 +889,8 @@ CONFIG_JBD=y
+ # CONFIG_OCFS2_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_ROMFS_FS is not set
+-# CONFIG_INOTIFY is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
+ # CONFIG_DNOTIFY is not set
+ # CONFIG_AUTOFS_FS is not set
+@@ -814,8 +923,7 @@ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-CONFIG_RAMFS=y
+-CONFIG_CONFIGFS_FS=y
++CONFIG_CONFIGFS_FS=m
+
+ #
+ # Miscellaneous filesystems
+@@ -830,10 +938,12 @@ CONFIG_CONFIGFS_FS=y
+ CONFIG_JFFS2_FS=y
+ CONFIG_JFFS2_FS_DEBUG=0
+ CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+ # CONFIG_JFFS2_SUMMARY is not set
+ # CONFIG_JFFS2_FS_XATTR is not set
+ # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+ CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
+ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
+ # CONFIG_CRAMFS is not set
+@@ -842,19 +952,21 @@ CONFIG_JFFS2_RTIME=y
+ # CONFIG_QNX4FS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+-
+-#
+-# Network File Systems
+-#
++CONFIG_NETWORK_FILESYSTEMS=y
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
+ # CONFIG_NFS_V4 is not set
+ # CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
++CONFIG_NFSD=m
++CONFIG_NFSD_V3=y
++# CONFIG_NFSD_V3_ACL is not set
++# CONFIG_NFSD_V4 is not set
++CONFIG_NFSD_TCP=y
+ CONFIG_ROOT_NFS=y
+ CONFIG_LOCKD=y
+ CONFIG_LOCKD_V4=y
++CONFIG_EXPORTFS=m
+ CONFIG_NFS_COMMON=y
+ CONFIG_SUNRPC=y
+ # CONFIG_SUNRPC_BIND34 is not set
+@@ -871,23 +983,18 @@ CONFIG_CIFS=m
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
+ # CONFIG_AFS_FS is not set
+-# CONFIG_9P_FS is not set
+
+ #
+ # Partition Types
+ #
+ # CONFIG_PARTITION_ADVANCED is not set
+ CONFIG_MSDOS_PARTITION=y
+-
+-#
+-# Native Language Support
+-#
+-CONFIG_NLS=y
++CONFIG_NLS=m
+ CONFIG_NLS_DEFAULT="iso8859-1"
+-# CONFIG_NLS_CODEPAGE_437 is not set
++CONFIG_NLS_CODEPAGE_437=m
+ # CONFIG_NLS_CODEPAGE_737 is not set
+ # CONFIG_NLS_CODEPAGE_775 is not set
+-CONFIG_NLS_CODEPAGE_850=y
++CONFIG_NLS_CODEPAGE_850=m
+ # CONFIG_NLS_CODEPAGE_852 is not set
+ # CONFIG_NLS_CODEPAGE_855 is not set
+ # CONFIG_NLS_CODEPAGE_857 is not set
+@@ -908,7 +1015,7 @@ CONFIG_NLS_CODEPAGE_850=y
+ # CONFIG_NLS_CODEPAGE_1250 is not set
+ # CONFIG_NLS_CODEPAGE_1251 is not set
+ # CONFIG_NLS_ASCII is not set
+-CONFIG_NLS_ISO8859_1=y
++CONFIG_NLS_ISO8859_1=m
+ # CONFIG_NLS_ISO8859_2 is not set
+ # CONFIG_NLS_ISO8859_3 is not set
+ # CONFIG_NLS_ISO8859_4 is not set
+@@ -921,18 +1028,19 @@ CONFIG_NLS_ISO8859_1=y
+ # CONFIG_NLS_ISO8859_15 is not set
+ # CONFIG_NLS_KOI8_R is not set
+ # CONFIG_NLS_KOI8_U is not set
+-CONFIG_NLS_UTF8=y
+-
+-#
+-# Distributed Lock Manager
+-#
++CONFIG_NLS_UTF8=m
+ # CONFIG_DLM is not set
++CONFIG_INSTRUMENTATION=y
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++CONFIG_KPROBES=y
++# CONFIG_MARKERS is not set
+
+ #
+ # Kernel hacking
+ #
+-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ # CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
+ CONFIG_ENABLE_MUST_CHECK=y
+ CONFIG_MAGIC_SYSRQ=y
+ # CONFIG_UNUSED_SYMBOLS is not set
+@@ -941,12 +1049,17 @@ CONFIG_MAGIC_SYSRQ=y
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+ # CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+@@ -954,21 +1067,21 @@ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+ # CONFIG_DEBUG_VM is not set
+ # CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
+ CONFIG_FRAME_POINTER=y
+ # CONFIG_FORCED_INLINING is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_LKDTM is not set
+ # CONFIG_FAULT_INJECTION is not set
+-# CONFIG_KPROBES is not set
++# CONFIG_SAMPLES is not set
+
+ #
+ # Security options
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-
+-#
+-# Cryptographic options
+-#
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ CONFIG_CRYPTO=y
+ CONFIG_CRYPTO_ALGAPI=y
+ CONFIG_CRYPTO_BLKCIPHER=y
+@@ -989,6 +1102,7 @@ CONFIG_CRYPTO_ECB=m
+ CONFIG_CRYPTO_CBC=y
+ CONFIG_CRYPTO_PCBC=m
+ # CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
+ # CONFIG_CRYPTO_CRYPTD is not set
+ CONFIG_CRYPTO_DES=y
+ # CONFIG_CRYPTO_FCRYPT is not set
+@@ -1002,15 +1116,14 @@ CONFIG_CRYPTO_DES=y
+ CONFIG_CRYPTO_ARC4=m
+ # CONFIG_CRYPTO_KHAZAD is not set
+ # CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
+ CONFIG_CRYPTO_DEFLATE=y
+ # CONFIG_CRYPTO_MICHAEL_MIC is not set
+ # CONFIG_CRYPTO_CRC32C is not set
+ # CONFIG_CRYPTO_CAMELLIA is not set
+ # CONFIG_CRYPTO_TEST is not set
+-
+-#
+-# Hardware crypto devices
+-#
++# CONFIG_CRYPTO_AUTHENC is not set
++CONFIG_CRYPTO_HW=y
+
+ #
+ # Library routines
+@@ -1018,8 +1131,9 @@ CONFIG_CRYPTO_DEFLATE=y
+ CONFIG_BITREVERSE=y
+ CONFIG_CRC_CCITT=m
+ # CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC_ITU_T=m
+ CONFIG_CRC32=y
++CONFIG_CRC7=m
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_ZLIB_DEFLATE=y
+diff -Nrup linux-2.6.24/arch/avr32/configs/atstk1002_defconfig linux-avr32/arch/avr32/configs/atstk1002_defconfig
+--- linux-2.6.24/arch/avr32/configs/atstk1002_defconfig 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/configs/atstk1002_defconfig 2008-02-01 14:51:35.000000000 -0500
+@@ -1,48 +1,48 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.22-rc5
+-# Sat Jun 23 15:32:08 2007
++# Linux kernel version: 2.6.24-rc7
++# Wed Jan 9 23:07:43 2008
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+ CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
+ CONFIG_GENERIC_TIME=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+ # CONFIG_ARCH_HAS_ILOG2_U32 is not set
+ # CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_ARCH_SUPPORTS_OPROFILE=y
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
+ CONFIG_GENERIC_BUG=y
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+ #
+-# Code maturity level options
++# General setup
+ #
+ CONFIG_EXPERIMENTAL=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+-
+-#
+-# General setup
+-#
+ CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SWAP=y
+ CONFIG_SYSVIPC=y
+-# CONFIG_IPC_NS is not set
+ CONFIG_SYSVIPC_SYSCTL=y
+ CONFIG_POSIX_MQUEUE=y
+-CONFIG_BSD_PROCESS_ACCT=y
+-CONFIG_BSD_PROCESS_ACCT_V3=y
+-CONFIG_TASKSTATS=y
+-CONFIG_TASK_DELAY_ACCT=y
+-# CONFIG_TASK_XACCT is not set
+-# CONFIG_UTS_NS is not set
+-CONFIG_AUDIT=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++# CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++# CONFIG_FAIR_GROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ CONFIG_RELAY=y
+ CONFIG_BLK_DEV_INITRD=y
+@@ -63,35 +63,28 @@ CONFIG_FUTEX=y
+ CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+ CONFIG_VM_EVENT_COUNTERS=y
+-# CONFIG_SLUB_DEBUG is not set
++CONFIG_SLUB_DEBUG=y
+ # CONFIG_SLAB is not set
+ CONFIG_SLUB=y
+ # CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=1
+-
+-#
+-# Loadable module support
+-#
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+ # CONFIG_MODULE_FORCE_UNLOAD is not set
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+ # CONFIG_KMOD is not set
+-
+-#
+-# Block layer
+-#
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+ # CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
+
+ #
+ # IO Schedulers
+@@ -99,12 +92,12 @@ CONFIG_BLOCK=y
+ CONFIG_IOSCHED_NOOP=y
+ # CONFIG_IOSCHED_AS is not set
+ # CONFIG_IOSCHED_DEADLINE is not set
+-# CONFIG_IOSCHED_CFQ is not set
++CONFIG_IOSCHED_CFQ=y
+ # CONFIG_DEFAULT_AS is not set
+ # CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-CONFIG_DEFAULT_NOOP=y
+-CONFIG_DEFAULT_IOSCHED="noop"
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
+
+ #
+ # System Type and features
+@@ -113,18 +106,27 @@ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
+ CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
+ CONFIG_CPU_AT32AP7000=y
+-CONFIG_BOARD_ATSTK1002=y
+ CONFIG_BOARD_ATSTK1000=y
+ # CONFIG_BOARD_ATNGW100 is not set
++CONFIG_BOARD_ATSTK1002=y
++# CONFIG_BOARD_ATSTK1003 is not set
++# CONFIG_BOARD_ATSTK1004 is not set
++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
++# CONFIG_BOARD_ATSTK100X_SPI1 is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
++# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
++CONFIG_BOARD_ATSTK1000_EXTDAC=y
+ CONFIG_LOADER_U_BOOT=y
+
+ #
+ # Atmel AVR32 AP options
+ #
+-# CONFIG_AP7000_32_BIT_SMC is not set
+-CONFIG_AP7000_16_BIT_SMC=y
+-# CONFIG_AP7000_8_BIT_SMC is not set
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
+ CONFIG_LOAD_ADDRESS=0x10000000
+ CONFIG_ENTRY_ADDRESS=0x90000000
+ CONFIG_PHYS_OFFSET=0x10000000
+@@ -144,9 +146,11 @@ CONFIG_FLATMEM_MANUAL=y
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+ # CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4
+ # CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
+ # CONFIG_OWNERSHIP_TRACE is not set
+ # CONFIG_HZ_100 is not set
+ CONFIG_HZ_250=y
+@@ -156,13 +160,31 @@ CONFIG_HZ=250
+ CONFIG_CMDLINE=""
+
+ #
+-# Bus options
++# Power management options
+ #
+-# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+ #
+-# PCCARD (PCMCIA/CardBus) support
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
+ #
++# CONFIG_ARCH_SUPPORTS_MSI is not set
+ # CONFIG_PCCARD is not set
+
+ #
+@@ -182,7 +204,12 @@ CONFIG_NET=y
+ CONFIG_PACKET=y
+ CONFIG_PACKET_MMAP=y
+ CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=m
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++CONFIG_NET_KEY=m
++# CONFIG_NET_KEY_MIGRATE is not set
+ CONFIG_INET=y
+ # CONFIG_IP_MULTICAST is not set
+ # CONFIG_IP_ADVANCED_ROUTER is not set
+@@ -191,36 +218,52 @@ CONFIG_IP_PNP=y
+ CONFIG_IP_PNP_DHCP=y
+ # CONFIG_IP_PNP_BOOTP is not set
+ # CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
++CONFIG_NET_IPIP=m
++CONFIG_NET_IPGRE=m
+ # CONFIG_ARPD is not set
+ # CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
+ # CONFIG_INET_IPCOMP is not set
+ # CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
++CONFIG_INET_TUNNEL=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
++# CONFIG_INET_LRO is not set
+ CONFIG_INET_DIAG=y
+ CONFIG_INET_TCP_DIAG=y
+ # CONFIG_TCP_CONG_ADVANCED is not set
+ CONFIG_TCP_CONG_CUBIC=y
+ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
++CONFIG_IPV6=m
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++# CONFIG_IPV6_MIP6 is not set
++CONFIG_INET6_XFRM_TUNNEL=m
++CONFIG_INET6_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_TUNNEL=m
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
+ # CONFIG_NETWORK_SECMARK is not set
+ # CONFIG_NETFILTER is not set
+ # CONFIG_IP_DCCP is not set
+ # CONFIG_IP_SCTP is not set
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
++CONFIG_BRIDGE=m
+ # CONFIG_VLAN_8021Q is not set
+ # CONFIG_DECNET is not set
++CONFIG_LLC=m
+ # CONFIG_LLC2 is not set
+ # CONFIG_IPX is not set
+ # CONFIG_ATALK is not set
+@@ -228,16 +271,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_LAPB is not set
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+-
+-#
+-# QoS and/or fair queueing
+-#
+ # CONFIG_NET_SCHED is not set
+
+ #
+ # Network testing
+ #
+ # CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_TCPPROBE is not set
+ # CONFIG_HAMRADIO is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+@@ -251,6 +291,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_MAC80211 is not set
+ # CONFIG_IEEE80211 is not set
+ # CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
+
+ #
+ # Device Drivers
+@@ -259,16 +300,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ #
+ # Generic Driver Options
+ #
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+ CONFIG_STANDALONE=y
+ # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+-
+-#
+-# Connector - unified userspace <-> kernelspace linker
+-#
+ # CONFIG_CONNECTOR is not set
+ CONFIG_MTD=y
+ # CONFIG_MTD_DEBUG is not set
+@@ -288,6 +326,7 @@ CONFIG_MTD_BLOCK=y
+ # CONFIG_INFTL is not set
+ # CONFIG_RFD_FTL is not set
+ # CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
+
+ #
+ # RAM/ROM/Flash chip drivers
+@@ -327,6 +366,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+ #
+ # Self-contained MTD device drivers
+ #
++CONFIG_MTD_DATAFLASH=m
++CONFIG_MTD_M25P80=m
+ # CONFIG_MTD_SLRAM is not set
+ # CONFIG_MTD_PHRAM is not set
+ # CONFIG_MTD_MTDRAM is not set
+@@ -345,20 +386,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+ # UBI - Unsorted block images
+ #
+ # CONFIG_MTD_UBI is not set
+-
+-#
+-# Parallel port support
+-#
+ # CONFIG_PARPORT is not set
+-
+-#
+-# Plug and Play support
+-#
+-# CONFIG_PNPACPI is not set
+-
+-#
+-# Block devices
+-#
++CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=m
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+@@ -369,42 +398,87 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-
+-#
+-# Misc devices
+-#
+-# CONFIG_BLINK is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=m
+ # CONFIG_IDE is not set
+
+ #
+ # SCSI device support
+ #
+ # CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
+ # CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
++# CONFIG_SCSI_PROC_FS is not set
+
+ #
+-# Multi-device support (RAID and LVM)
++# SCSI support type (disk, tape, CD-ROM)
+ #
+-# CONFIG_MD is not set
++CONFIG_BLK_DEV_SD=m
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++CONFIG_BLK_DEV_SR=m
++# CONFIG_BLK_DEV_SR_VENDOR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
+
+ #
+-# Network device support
++# SCSI Transports
+ #
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_ATA=m
++# CONFIG_ATA_NONSTANDARD is not set
++CONFIG_PATA_AT32=m
++# CONFIG_PATA_PLATFORM is not set
++# CONFIG_MD is not set
+ CONFIG_NETDEVICES=y
+-CONFIG_DUMMY=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
+ # CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
+ # CONFIG_EQUALIZER is not set
+ CONFIG_TUN=m
+-# CONFIG_PHYLIB is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
+
+ #
+-# Ethernet (10 or 100Mbit)
++# MII PHY device drivers
+ #
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
+ CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
++# CONFIG_MII is not set
+ CONFIG_MACB=y
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+
+@@ -423,27 +497,54 @@ CONFIG_PPP_DEFLATE=m
+ CONFIG_PPP_BSDCOMP=m
+ # CONFIG_PPP_MPPE is not set
+ # CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
+ # CONFIG_SLIP is not set
+ CONFIG_SLHC=m
+ # CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+-
+-#
+-# ISDN subsystem
+-#
+ # CONFIG_ISDN is not set
+-
+-#
+-# Telephony Support
+-#
+ # CONFIG_PHONE is not set
+
+ #
+ # Input device support
+ #
+-# CONFIG_INPUT is not set
++CONFIG_INPUT=m
++# CONFIG_INPUT_FF_MEMLESS is not set
++CONFIG_INPUT_POLLDEV=m
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++CONFIG_MOUSE_GPIO=m
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
+
+ #
+ # Hardware I/O ports
+@@ -472,35 +573,87 @@ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ CONFIG_UNIX98_PTYS=y
+ # CONFIG_LEGACY_PTYS is not set
+-
+-#
+-# IPMI
+-#
+ # CONFIG_IPMI_HANDLER is not set
+-# CONFIG_WATCHDOG is not set
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_RTC is not set
+ # CONFIG_GEN_RTC is not set
+ # CONFIG_R3964 is not set
+ # CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
+
+ #
+-# TPM devices
++# SPI support
+ #
+-# CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
+
+ #
+-# SPI support
++# SPI Master Controller Drivers
+ #
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
+
+ #
+-# Dallas's 1-wire bus
++# SPI Protocol Masters
+ #
++# CONFIG_SPI_AT25 is not set
++CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
+ # CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
+
+ #
+ # Multifunction device drivers
+@@ -517,23 +670,94 @@ CONFIG_UNIX98_PTYS=y
+ #
+ # Graphics support
+ #
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_VIRTUAL is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_LCD_LTV350QV=y
++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+
+ #
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
+-# CONFIG_VGASTATE is not set
+-# CONFIG_FB is not set
++# CONFIG_LOGO is not set
+
+ #
+ # Sound
+ #
+-# CONFIG_SOUND is not set
++CONFIG_SOUND=m
++
++#
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++# CONFIG_SND_SUPPORT_OLD_API is not set
++# CONFIG_SND_VERBOSE_PROCFS is not set
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++
++#
++# Generic devices
++#
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++
++#
++# SPI devices
++#
++CONFIG_SND_AT73C213=m
++CONFIG_SND_AT73C213_TARGET_BITRATE=48000
++
++#
++# System on Chip audio support
++#
++# CONFIG_SND_SOC is not set
++
++#
++# SoC Audio support for SuperH
++#
+
+ #
+-# USB support
++# Open Sound System
+ #
++# CONFIG_SOUND_PRIME is not set
++# CONFIG_HID_SUPPORT is not set
++CONFIG_USB_SUPPORT=y
+ # CONFIG_USB_ARCH_HAS_HCD is not set
+ # CONFIG_USB_ARCH_HAS_OHCI is not set
+ # CONFIG_USB_ARCH_HAS_EHCI is not set
+@@ -545,47 +769,116 @@ CONFIG_UNIX98_PTYS=y
+ #
+ # USB Gadget Support
+ #
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-
+-#
+-# LED devices
+-#
+-# CONFIG_NEW_LEDS is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++# CONFIG_USB_GADGET_DEBUG_FS is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=m
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=m
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_SPI=m
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=m
+
+ #
+ # LED drivers
+ #
++CONFIG_LEDS_GPIO=m
+
+ #
+ # LED Triggers
+ #
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=m
++CONFIG_LEDS_TRIGGER_HEARTBEAT=m
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
+
+ #
+-# InfiniBand support
++# RTC interfaces
+ #
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
+
+ #
+-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
++# I2C RTC drivers
+ #
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
+
+ #
+-# Real Time Clock
++# SPI RTC drivers
+ #
+-# CONFIG_RTC_CLASS is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
+
+ #
+-# DMA Engine support
++# Platform RTC drivers
+ #
+-# CONFIG_DMA_ENGINE is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
+
+ #
+-# DMA Clients
++# on-CPU RTC drivers
+ #
++CONFIG_RTC_DRV_AT32AP700X=y
+
+ #
+-# DMA Devices
++# Userspace I/O
+ #
++# CONFIG_UIO is not set
+
+ #
+ # File systems
+@@ -593,8 +886,11 @@ CONFIG_UNIX98_PTYS=y
+ CONFIG_EXT2_FS=m
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+-# CONFIG_EXT3_FS is not set
++CONFIG_EXT3_FS=m
++# CONFIG_EXT3_FS_XATTR is not set
+ # CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=m
++# CONFIG_JBD_DEBUG is not set
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+@@ -609,7 +905,7 @@ CONFIG_INOTIFY_USER=y
+ # CONFIG_DNOTIFY is not set
+ # CONFIG_AUTOFS_FS is not set
+ # CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
++CONFIG_FUSE_FS=m
+
+ #
+ # CD-ROM/DVD Filesystems
+@@ -637,8 +933,7 @@ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-CONFIG_RAMFS=y
+-CONFIG_CONFIGFS_FS=m
++# CONFIG_CONFIGFS_FS is not set
+
+ #
+ # Miscellaneous filesystems
+@@ -652,11 +947,12 @@ CONFIG_CONFIGFS_FS=m
+ # CONFIG_EFS_FS is not set
+ CONFIG_JFFS2_FS=y
+ CONFIG_JFFS2_FS_DEBUG=0
+-CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+ # CONFIG_JFFS2_SUMMARY is not set
+ # CONFIG_JFFS2_FS_XATTR is not set
+ # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+ CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
+ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
+ # CONFIG_CRAMFS is not set
+@@ -665,10 +961,7 @@ CONFIG_JFFS2_RTIME=y
+ # CONFIG_QNX4FS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+-
+-#
+-# Network File Systems
+-#
++CONFIG_NETWORK_FILESYSTEMS=y
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
+@@ -688,17 +981,12 @@ CONFIG_SUNRPC=y
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
+ # CONFIG_AFS_FS is not set
+-# CONFIG_9P_FS is not set
+
+ #
+ # Partition Types
+ #
+ # CONFIG_PARTITION_ADVANCED is not set
+ CONFIG_MSDOS_PARTITION=y
+-
+-#
+-# Native Language Support
+-#
+ CONFIG_NLS=m
+ CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=m
+@@ -739,17 +1027,18 @@ CONFIG_NLS_ISO8859_1=m
+ # CONFIG_NLS_KOI8_R is not set
+ # CONFIG_NLS_KOI8_U is not set
+ CONFIG_NLS_UTF8=m
+-
+-#
+-# Distributed Lock Manager
+-#
+ # CONFIG_DLM is not set
++CONFIG_INSTRUMENTATION=y
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++CONFIG_KPROBES=y
++# CONFIG_MARKERS is not set
+
+ #
+ # Kernel hacking
+ #
+-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ # CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
+ CONFIG_ENABLE_MUST_CHECK=y
+ CONFIG_MAGIC_SYSRQ=y
+ # CONFIG_UNUSED_SYMBOLS is not set
+@@ -758,12 +1047,17 @@ CONFIG_DEBUG_FS=y
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+ # CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+@@ -771,22 +1065,63 @@ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+ # CONFIG_DEBUG_VM is not set
+ # CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
+ CONFIG_FRAME_POINTER=y
+ CONFIG_FORCED_INLINING=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_LKDTM is not set
+ # CONFIG_FAULT_INJECTION is not set
+-# CONFIG_KPROBES is not set
++# CONFIG_SAMPLES is not set
+
+ #
+ # Security options
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-
+-#
+-# Cryptographic options
+-#
+-# CONFIG_CRYPTO is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=m
++CONFIG_CRYPTO_BLKCIPHER=m
++CONFIG_CRYPTO_HASH=m
++CONFIG_CRYPTO_MANAGER=m
++CONFIG_CRYPTO_HMAC=m
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=m
++CONFIG_CRYPTO_SHA1=m
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=m
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=m
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++CONFIG_CRYPTO_DEFLATE=m
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_HW is not set
+
+ #
+ # Library routines
+@@ -794,10 +1129,10 @@ CONFIG_FORCED_INLINING=y
+ CONFIG_BITREVERSE=y
+ CONFIG_CRC_CCITT=m
+ # CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC_ITU_T=m
+ CONFIG_CRC32=y
++CONFIG_CRC7=m
+ # CONFIG_LIBCRC32C is not set
+-CONFIG_AUDIT_GENERIC=y
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_ZLIB_DEFLATE=y
+ CONFIG_PLIST=y
+diff -Nrup linux-2.6.24/arch/avr32/configs/atstk1003_defconfig linux-avr32/arch/avr32/configs/atstk1003_defconfig
+--- linux-2.6.24/arch/avr32/configs/atstk1003_defconfig 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/configs/atstk1003_defconfig 2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,1015 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.24-rc7
++# Wed Jan 9 22:54:34 2008
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_ARCH_SUPPORTS_OPROFILE=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++CONFIG_TASKSTATS=y
++CONFIG_TASK_DELAY_ACCT=y
++# CONFIG_TASK_XACCT is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++CONFIG_AUDIT=y
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_RELAY=y
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_BASE_FULL is not set
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++# CONFIG_SLUB_DEBUG is not set
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_AS is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++
++#
++# System Type and features
++#
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
++CONFIG_CPU_AT32AP7001=y
++CONFIG_BOARD_ATSTK1000=y
++# CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_ATSTK1002 is not set
++CONFIG_BOARD_ATSTK1003=y
++# CONFIG_BOARD_ATSTK1004 is not set
++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
++# CONFIG_BOARD_ATSTK100X_SPI1 is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
++# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
++CONFIG_BOARD_ATSTK1000_EXTDAC=y
++CONFIG_LOADER_U_BOOT=y
++
++#
++# Atmel AVR32 AP options
++#
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_OWNERSHIP_TRACE is not set
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_CMDLINE=""
++
++#
++# Power management options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_PNP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_TCPPROBE is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x8000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=m
++CONFIG_MTD_M25P80=m
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=m
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=m
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_SCSI_PROC_FS is not set
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=m
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++CONFIG_BLK_DEV_SR=m
++# CONFIG_BLK_DEV_SR_VENDOR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_SCSI_DEBUG is not set
++CONFIG_ATA=m
++# CONFIG_ATA_NONSTANDARD is not set
++CONFIG_PATA_AT32=m
++# CONFIG_PATA_PLATFORM is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_NET_ETHERNET is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++CONFIG_PPP=m
++# CONFIG_PPP_MULTILINK is not set
++# CONFIG_PPP_FILTER is not set
++CONFIG_PPP_ASYNC=m
++# CONFIG_PPP_SYNC_TTY is not set
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++# CONFIG_PPP_MPPE is not set
++# CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=m
++# CONFIG_INPUT_FF_MEMLESS is not set
++CONFIG_INPUT_POLLDEV=m
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++CONFIG_MOUSE_GPIO=m
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_RTC is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++CONFIG_SOUND=m
++
++#
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++CONFIG_SND_SUPPORT_OLD_API=y
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++
++#
++# Generic devices
++#
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++
++#
++# SPI devices
++#
++CONFIG_SND_AT73C213=m
++CONFIG_SND_AT73C213_TARGET_BITRATE=48000
++
++#
++# System on Chip audio support
++#
++# CONFIG_SND_SOC is not set
++
++#
++# SoC Audio support for SuperH
++#
++
++#
++# Open Sound System
++#
++# CONFIG_SOUND_PRIME is not set
++# CONFIG_HID_SUPPORT is not set
++CONFIG_USB_SUPPORT=y
++# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_DEBUG_FS=y
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=m
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=m
++# CONFIG_MMC_BLOCK_BOUNCE is not set
++# CONFIG_SDIO_UART is not set
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_SPI=m
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++CONFIG_LEDS_GPIO=y
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
++
++#
++# Userspace I/O
++#
++CONFIG_UIO=m
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=m
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=m
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=m
++# CONFIG_JBD_DEBUG is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_DNOTIFY is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++CONFIG_FUSE_FS=m
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=m
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++# CONFIG_NETWORK_FILESYSTEMS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=m
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=m
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=m
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
++# CONFIG_DLM is not set
++CONFIG_INSTRUMENTATION=y
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++CONFIG_KPROBES=y
++# CONFIG_MARKERS is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++CONFIG_FRAME_POINTER=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_LKDTM is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++# CONFIG_CRYPTO is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_CRC_CCITT=m
++# CONFIG_CRC16 is not set
++CONFIG_CRC_ITU_T=m
++CONFIG_CRC32=y
++CONFIG_CRC7=m
++# CONFIG_LIBCRC32C is not set
++CONFIG_AUDIT_GENERIC=y
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff -Nrup linux-2.6.24/arch/avr32/configs/atstk1004_defconfig linux-avr32/arch/avr32/configs/atstk1004_defconfig
+--- linux-2.6.24/arch/avr32/configs/atstk1004_defconfig 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/configs/atstk1004_defconfig 2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,621 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.24-rc7
++# Wed Jan 9 23:04:20 2008
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_ARCH_SUPPORTS_OPROFILE=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++# CONFIG_SYSVIPC is not set
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++# CONFIG_FAIR_GROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_BLK_DEV_INITRD is not set
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_BASE_FULL is not set
++# CONFIG_FUTEX is not set
++# CONFIG_EPOLL is not set
++# CONFIG_SIGNALFD is not set
++# CONFIG_EVENTFD is not set
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++# CONFIG_SLAB is not set
++# CONFIG_SLUB is not set
++CONFIG_SLOB=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++# CONFIG_MODULES is not set
++# CONFIG_BLOCK is not set
++
++#
++# System Type and features
++#
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
++CONFIG_CPU_AT32AP7002=y
++CONFIG_BOARD_ATSTK1000=y
++# CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_ATSTK1002 is not set
++# CONFIG_BOARD_ATSTK1003 is not set
++CONFIG_BOARD_ATSTK1004=y
++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
++# CONFIG_BOARD_ATSTK100X_SPI1 is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++CONFIG_BOARD_ATSTK1000_EXTDAC=y
++CONFIG_LOADER_U_BOOT=y
++
++#
++# Atmel AVR32 AP options
++#
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_OWNERSHIP_TRACE is not set
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_CMDLINE=""
++
++#
++# Power management options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_PNP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++# CONFIG_FW_LOADER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x8000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++# CONFIG_MISC_DEVICES is not set
++
++#
++# SCSI device support
++#
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_NETDEVICES is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_RTC is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_VIRTUAL is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_LCD_LTV350QV=y
++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++# CONFIG_LOGO is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++# CONFIG_USB_ZERO is not set
++CONFIG_USB_ETH=y
++# CONFIG_USB_ETH_RNDIS is not set
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FILE_STORAGE is not set
++# CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_NEW_LEDS is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++# CONFIG_RTC_INTF_PROC is not set
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++# CONFIG_INOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_DNOTIFY is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++# CONFIG_JFFS2_FS_WRITEBUFFER is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_NETWORK_FILESYSTEMS is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++# CONFIG_INSTRUMENTATION is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++# CONFIG_CRYPTO is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff -Nrup linux-2.6.24/arch/avr32/drivers/dw-dmac.c linux-avr32/arch/avr32/drivers/dw-dmac.c
+--- linux-2.6.24/arch/avr32/drivers/dw-dmac.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/drivers/dw-dmac.c 2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,761 @@
++/*
++ * Driver for the Synopsys DesignWare DMA Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++
++#include "dw-dmac.h"
++
++#define DMAC_NR_CHANNELS 3
++#define DMAC_MAX_BLOCKSIZE 4095
++
++enum {
++ CH_STATE_FREE = 0,
++ CH_STATE_ALLOCATED,
++ CH_STATE_BUSY,
++};
++
++struct dw_dma_lli {
++ dma_addr_t sar;
++ dma_addr_t dar;
++ dma_addr_t llp;
++ u32 ctllo;
++ u32 ctlhi;
++ u32 sstat;
++ u32 dstat;
++};
++
++struct dw_dma_block {
++ struct dw_dma_lli *lli_vaddr;
++ dma_addr_t lli_dma_addr;
++};
++
++struct dw_dma_channel {
++ unsigned int state;
++ int is_cyclic;
++ struct dma_request_sg *req_sg;
++ struct dma_request_cyclic *req_cyclic;
++ unsigned int nr_blocks;
++ int direction;
++ struct dw_dma_block *block;
++};
++
++struct dw_dma_controller {
++ spinlock_t lock;
++ void * __iomem regs;
++ struct dma_pool *lli_pool;
++ struct clk *hclk;
++ struct dma_controller dma;
++ struct dw_dma_channel channel[DMAC_NR_CHANNELS];
++};
++#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
++
++#define dmac_writel_hi(dmac, reg, value) \
++ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_readl_hi(dmac, reg) \
++ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_writel_lo(dmac, reg, value) \
++ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
++#define dmac_readl_lo(dmac, reg) \
++ __raw_readl((dmac)->regs + DW_DMAC_##reg)
++#define dmac_chan_writel_hi(dmac, chan, reg, value) \
++ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
++ + DW_DMAC_CHAN_##reg + 4))
++#define dmac_chan_readl_hi(dmac, chan, reg) \
++ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
++#define dmac_chan_writel_lo(dmac, chan, reg, value) \
++ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define dmac_chan_readl_lo(dmac, chan, reg) \
++ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define set_channel_bit(dmac, reg, chan) \
++ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
++#define clear_channel_bit(dmac, reg, chan) \
++ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
++
++static int dmac_alloc_channel(struct dma_controller *_dmac)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long flags;
++ int i;
++
++ spin_lock_irqsave(&dmac->lock, flags);
++ for (i = 0; i < DMAC_NR_CHANNELS; i++)
++ if (dmac->channel[i].state == CH_STATE_FREE)
++ break;
++
++ if (i < DMAC_NR_CHANNELS) {
++ chan = &dmac->channel[i];
++ chan->state = CH_STATE_ALLOCATED;
++ } else {
++ i = -EBUSY;
++ }
++
++ spin_unlock_irqrestore(&dmac->lock, flags);
++
++ return i;
++}
++
++static void dmac_release_channel(struct dma_controller *_dmac, int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS
++ || dmac->channel[channel].state != CH_STATE_ALLOCATED);
++
++ dmac->channel[channel].state = CH_STATE_FREE;
++}
++
++static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
++ unsigned int nr_blocks)
++{
++ struct dw_dma_block *block;
++ void *p;
++ unsigned int i;
++
++ block = kmalloc(nr_blocks * sizeof(*block),
++ GFP_KERNEL);
++ if (unlikely(!block))
++ return NULL;
++
++ for (i = 0; i < nr_blocks; i++) {
++ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
++ &block[i].lli_dma_addr);
++ block[i].lli_vaddr = p;
++ if (unlikely(!p))
++ goto fail;
++ }
++
++ return block;
++
++fail:
++ for (i = 0; i < nr_blocks; i++) {
++ if (!block[i].lli_vaddr)
++ break;
++ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
++ block[i].lli_dma_addr);
++ }
++ kfree(block);
++ return NULL;
++}
++
++static void cleanup_channel(struct dw_dma_controller *dmac,
++ struct dw_dma_channel *chan)
++{
++ unsigned int i;
++
++ if (chan->nr_blocks > 1) {
++ for (i = 0; i < chan->nr_blocks; i++)
++ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
++ chan->block[i].lli_dma_addr);
++ kfree(chan->block);
++ }
++
++ chan->state = CH_STATE_ALLOCATED;
++}
++
++static int dmac_prepare_request_sg(struct dma_controller *_dmac,
++ struct dma_request_sg *req)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long ctlhi, ctllo, cfghi, cfglo;
++ unsigned long block_size;
++ unsigned int nr_blocks;
++ int ret, i, direction;
++ unsigned long flags;
++
++ spin_lock_irqsave(&dmac->lock, flags);
++
++ ret = -EINVAL;
++ if (req->req.channel >= DMAC_NR_CHANNELS
++ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++ || req->block_size > DMAC_MAX_BLOCKSIZE) {
++ spin_unlock_irqrestore(&dmac->lock, flags);
++ return -EINVAL;
++ }
++
++ chan = &dmac->channel[req->req.channel];
++ chan->state = CH_STATE_BUSY;
++ chan->req_sg = req;
++ chan->is_cyclic = 0;
++
++ /*
++ * We have marked the channel as busy, so no need to keep the
++ * lock as long as we only touch the channel-specific
++ * registers
++ */
++ spin_unlock_irqrestore(&dmac->lock, flags);
++
++ /*
++ * There may be limitations in the driver and/or the DMA
++ * controller that prevents us from sending a whole
++ * scatterlist item in one go. Taking this into account,
++ * calculate the number of block transfers we need to set up.
++ *
++ * FIXME: Let the peripheral driver know about the maximum
++ * block size we support. We really don't want to use a
++ * different block size than what was suggested by the
++ * peripheral.
++ *
++ * Each block will get its own Linked List Item (LLI) below.
++ */
++ block_size = req->block_size;
++ nr_blocks = req->nr_blocks;
++ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
++ block_size, nr_blocks, req->nr_sg);
++
++ BUG_ON(nr_blocks == 0);
++ chan->nr_blocks = nr_blocks;
++
++ ret = -EINVAL;
++ cfglo = cfghi = 0;
++ switch (req->direction) {
++ case DMA_DIR_MEM_TO_PERIPH:
++ direction = DMA_TO_DEVICE;
++ cfghi = req->periph_id << (43 - 32);
++ break;
++
++ case DMA_DIR_PERIPH_TO_MEM:
++ direction = DMA_FROM_DEVICE;
++ cfghi = req->periph_id << (39 - 32);
++ break;
++ default:
++ goto out_unclaim_channel;
++ }
++
++ chan->direction = direction;
++
++ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++
++ ctlhi = block_size >> req->width;
++ ctllo = ((req->direction << 20)
++ // | (1 << 14) | (1 << 11) // source/dest burst trans len
++ | (req->width << 4) | (req->width << 1)
++ | (1 << 0)); // interrupt enable
++
++ if (nr_blocks == 1) {
++ /* Only one block: No need to use block chaining */
++ if (direction == DMA_TO_DEVICE) {
++ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++ req->sg->dma_address);
++ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++ req->data_reg);
++ ctllo |= 2 << 7; // no dst increment
++ } else {
++ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++ req->data_reg);
++ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++ req->sg->dma_address);
++ ctllo |= 2 << 9; // no src increment
++ }
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
++ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
++ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
++ } else {
++ struct dw_dma_lli *lli, *lli_prev = NULL;
++ int j = 0, offset = 0;
++
++ ret = -ENOMEM;
++ chan->block = allocate_blocks(dmac, nr_blocks);
++ if (!chan->block)
++ goto out_unclaim_channel;
++
++ if (direction == DMA_TO_DEVICE)
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++ else
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++
++ /*
++ * Map scatterlist items to blocks. One scatterlist
++ * item may need more than one block for the reasons
++ * mentioned above.
++ */
++ for (i = 0; i < nr_blocks; i++) {
++ lli = chan->block[i].lli_vaddr;
++ if (lli_prev) {
++ lli_prev->llp = chan->block[i].lli_dma_addr;
++ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr,
++ lli_prev->sar, lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);
++ }
++ lli->llp = 0;
++ lli->ctllo = ctllo;
++ lli->ctlhi = ctlhi;
++ if (direction == DMA_TO_DEVICE) {
++ lli->sar = req->sg[j].dma_address + offset;
++ lli->dar = req->data_reg;
++ } else {
++ lli->sar = req->data_reg;
++ lli->dar = req->sg[j].dma_address + offset;
++ }
++ lli_prev = lli;
++
++ offset += block_size;
++ if (offset > req->sg[j].length) {
++ j++;
++ offset = 0;
++ }
++ }
++
++ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++ lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);
++
++ /*
++ * SAR, DAR and CTL are initialized from the LLI. We
++ * only have to enable the LLI bits in CTL.
++ */
++ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
++ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++ chan->block[0].lli_dma_addr);
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
++ }
++
++ set_channel_bit(dmac, MASK_XFER, req->req.channel);
++ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++ if (req->req.block_complete)
++ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++ else
++ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++
++ return 0;
++
++out_unclaim_channel:
++ chan->state = CH_STATE_ALLOCATED;
++ return ret;
++}
++
++static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
++ struct dma_request_cyclic *req)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long ctlhi, ctllo, cfghi, cfglo;
++ unsigned long block_size;
++ int ret, i, direction;
++ unsigned long flags;
++
++ spin_lock_irqsave(&dmac->lock, flags);
++
++ block_size = (req->buffer_size/req->periods) >> req->width;
++
++ ret = -EINVAL;
++ if (req->req.channel >= DMAC_NR_CHANNELS
++ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++ || (req->periods == 0)
++ || block_size > DMAC_MAX_BLOCKSIZE) {
++ spin_unlock_irqrestore(&dmac->lock, flags);
++ return -EINVAL;
++ }
++
++ chan = &dmac->channel[req->req.channel];
++ chan->state = CH_STATE_BUSY;
++ chan->is_cyclic = 1;
++ chan->req_cyclic = req;
++
++ /*
++ * We have marked the channel as busy, so no need to keep the
++ * lock as long as we only touch the channel-specific
++ * registers
++ */
++ spin_unlock_irqrestore(&dmac->lock, flags);
++
++ /*
++ Setup
++ */
++ BUG_ON(req->buffer_size % req->periods);
++ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
++
++ chan->nr_blocks = req->periods;
++
++ ret = -EINVAL;
++ cfglo = cfghi = 0;
++ switch (req->direction) {
++ case DMA_DIR_MEM_TO_PERIPH:
++ direction = DMA_TO_DEVICE;
++ cfghi = req->periph_id << (43 - 32);
++ break;
++
++ case DMA_DIR_PERIPH_TO_MEM:
++ direction = DMA_FROM_DEVICE;
++ cfghi = req->periph_id << (39 - 32);
++ break;
++ default:
++ goto out_unclaim_channel;
++ }
++
++ chan->direction = direction;
++
++ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++
++ ctlhi = block_size;
++ ctllo = ((req->direction << 20)
++ | (req->width << 4) | (req->width << 1)
++ | (1 << 0)); // interrupt enable
++
++ {
++ struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
++
++ ret = -ENOMEM;
++ chan->block = allocate_blocks(dmac, req->periods);
++ if (!chan->block)
++ goto out_unclaim_channel;
++
++ if (direction == DMA_TO_DEVICE)
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++ else
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++
++ /*
++ * Set up a linked list items where each period gets
++ * an item. The linked list item for the last period
++ * points back to the star of the buffer making a
++ * cyclic buffer.
++ */
++ for (i = 0; i < req->periods; i++) {
++ lli = chan->block[i].lli_vaddr;
++ if (lli_prev) {
++ lli_prev->llp = chan->block[i].lli_dma_addr;
++ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr,
++ lli_prev->sar, lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);*/
++ }
++ lli->llp = 0;
++ lli->ctllo = ctllo;
++ lli->ctlhi = ctlhi;
++ if (direction == DMA_TO_DEVICE) {
++ lli->sar = req->buffer_start + i*(block_size << req->width);
++ lli->dar = req->data_reg;
++ } else {
++ lli->sar = req->data_reg;
++ lli->dar = req->buffer_start + i*(block_size << req->width);
++ }
++ lli_prev = lli;
++ }
++ lli->llp = chan->block[0].lli_dma_addr;
++
++ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++ lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi); */
++
++ /*
++ * SAR, DAR and CTL are initialized from the LLI. We
++ * only have to enable the LLI bits in CTL.
++ */
++ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++ chan->block[0].lli_dma_addr);
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
++ }
++
++ clear_channel_bit(dmac, MASK_XFER, req->req.channel);
++ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++ if (req->req.block_complete)
++ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++ else
++ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++
++ return 0;
++
++out_unclaim_channel:
++ chan->state = CH_STATE_ALLOCATED;
++ return ret;
++}
++
++static int dmac_start_request(struct dma_controller *_dmac,
++ unsigned int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ set_channel_bit(dmac, CH_EN, channel);
++
++ return 0;
++}
++
++static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
++ unsigned int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ dma_addr_t current_pos;
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ chan = &dmac->channel[channel];
++
++ switch (chan->direction) {
++ case DMA_TO_DEVICE:
++ current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
++ break;
++ case DMA_FROM_DEVICE:
++ current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
++ break;
++ default:
++ return 0;
++ }
++
++
++ if (!current_pos) {
++ if (chan->is_cyclic) {
++ current_pos = chan->req_cyclic->buffer_start;
++ } else {
++ current_pos = chan->req_sg->sg->dma_address;
++ }
++ }
++
++ return current_pos;
++}
++
++
++static int dmac_stop_request(struct dma_controller *_dmac,
++ unsigned int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ chan = &dmac->channel[channel];
++ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
++ chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
++ dmac_chan_readl_lo(dmac, channel, DAR),
++ dmac_chan_readl_lo(dmac, channel, LLP),
++ dmac_chan_readl_hi(dmac, channel, CTL),
++ dmac_chan_readl_lo(dmac, channel, CTL));
++
++ if (chan->state == CH_STATE_BUSY) {
++ clear_channel_bit(dmac, CH_EN, channel);
++ cleanup_channel(dmac, &dmac->channel[channel]);
++ }
++
++ return 0;
++}
++
++
++static void dmac_block_complete(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_BLOCK);
++
++ while (status) {
++ struct dma_request *req;
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ if (chan->is_cyclic) {
++ BUG_ON(!chan->req_cyclic
++ || !chan->req_cyclic->req.block_complete);
++ req = &chan->req_cyclic->req;
++ } else {
++ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
++ req = &chan->req_sg->req;
++ }
++ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
++ req->block_complete(req);
++ status = dmac_readl_lo(dmac, STATUS_BLOCK);
++ }
++}
++
++static void dmac_xfer_complete(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ struct dma_request *req;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++
++ while (status) {
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
++
++ req = &chan->req_sg->req;
++ BUG_ON(!req);
++ cleanup_channel(dmac, chan);
++ if (req->xfer_complete)
++ req->xfer_complete(req);
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++ }
++}
++
++static void dmac_error(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_ERROR);
++
++ while (status) {
++ struct dma_request *req;
++
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
++ clear_channel_bit(dmac, CH_EN, chanid);
++
++ if (chan->is_cyclic) {
++ BUG_ON(!chan->req_cyclic);
++ req = &chan->req_cyclic->req;
++ } else {
++ BUG_ON(!chan->req_sg);
++ req = &chan->req_sg->req;
++ }
++
++ cleanup_channel(dmac, chan);
++ if (req->error)
++ req->error(req);
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++ }
++}
++
++static irqreturn_t dmac_interrupt(int irq, void *dev_id)
++{
++ struct dw_dma_controller *dmac = dev_id;
++ unsigned long status;
++ int ret = IRQ_NONE;
++
++ spin_lock(&dmac->lock);
++
++ status = dmac_readl_lo(dmac, STATUS_INT);
++
++ while (status) {
++ ret = IRQ_HANDLED;
++ if (status & 0x10)
++ dmac_error(dmac);
++ if (status & 0x02)
++ dmac_block_complete(dmac);
++ if (status & 0x01)
++ dmac_xfer_complete(dmac);
++
++ status = dmac_readl_lo(dmac, STATUS_INT);
++ }
++
++ spin_unlock(&dmac->lock);
++ return ret;
++}
++
++static int __devinit dmac_probe(struct platform_device *pdev)
++{
++ struct dw_dma_controller *dmac;
++ struct resource *regs;
++ int ret;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++
++ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
++ if (!dmac)
++ return -ENOMEM;
++ memset(dmac, 0, sizeof(*dmac));
++
++ dmac->hclk = clk_get(&pdev->dev, "hclk");
++ if (IS_ERR(dmac->hclk)) {
++ ret = PTR_ERR(dmac->hclk);
++ goto out_free_dmac;
++ }
++ clk_enable(dmac->hclk);
++
++ ret = -ENOMEM;
++ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
++ sizeof(struct dw_dma_lli), 4, 0);
++ if (!dmac->lli_pool)
++ goto out_disable_clk;
++
++ spin_lock_init(&dmac->lock);
++ dmac->dma.dev = &pdev->dev;
++ dmac->dma.alloc_channel = dmac_alloc_channel;
++ dmac->dma.release_channel = dmac_release_channel;
++ dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
++ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
++ dmac->dma.start_request = dmac_start_request;
++ dmac->dma.stop_request = dmac_stop_request;
++ dmac->dma.get_current_pos = dmac_get_current_pos;
++
++ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!dmac->regs)
++ goto out_free_pool;
++
++ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
++ IRQF_SAMPLE_RANDOM, pdev->name, dmac);
++ if (ret)
++ goto out_unmap_regs;
++
++ /* Enable the DMA controller */
++ dmac_writel_lo(dmac, CFG, 1);
++
++ register_dma_controller(&dmac->dma);
++
++ printk(KERN_INFO
++ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
++ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
++
++ return 0;
++
++out_unmap_regs:
++ iounmap(dmac->regs);
++out_free_pool:
++ dma_pool_destroy(dmac->lli_pool);
++out_disable_clk:
++ clk_disable(dmac->hclk);
++ clk_put(dmac->hclk);
++out_free_dmac:
++ kfree(dmac);
++ return ret;
++}
++
++static struct platform_driver dmac_driver = {
++ .probe = dmac_probe,
++ .driver = {
++ .name = "dmaca",
++ },
++};
++
++static int __init dmac_init(void)
++{
++ return platform_driver_register(&dmac_driver);
++}
++subsys_initcall(dmac_init);
++
++static void __exit dmac_exit(void)
++{
++ platform_driver_unregister(&dmac_driver);
++}
++module_exit(dmac_exit);
++
++MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_LICENSE("GPL");
+diff -Nrup linux-2.6.24/arch/avr32/drivers/dw-dmac.h linux-avr32/arch/avr32/drivers/dw-dmac.h
+--- linux-2.6.24/arch/avr32/drivers/dw-dmac.h 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/drivers/dw-dmac.h 2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,42 @@
++/*
++ * Driver for the Synopsys DesignWare DMA Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __AVR32_DW_DMAC_H__
++#define __AVR32_DW_DMAC_H__
++
++#define DW_DMAC_CFG 0x398
++#define DW_DMAC_CH_EN 0x3a0
++
++#define DW_DMAC_STATUS_XFER 0x2e8
++#define DW_DMAC_STATUS_BLOCK 0x2f0
++#define DW_DMAC_STATUS_ERROR 0x308
++
++#define DW_DMAC_MASK_XFER 0x310
++#define DW_DMAC_MASK_BLOCK 0x318
++#define DW_DMAC_MASK_ERROR 0x330
++
++#define DW_DMAC_CLEAR_XFER 0x338
++#define DW_DMAC_CLEAR_BLOCK 0x340
++#define DW_DMAC_CLEAR_ERROR 0x358
++
++#define DW_DMAC_STATUS_INT 0x360
++
++#define DW_DMAC_CHAN_SAR 0x000
++#define DW_DMAC_CHAN_DAR 0x008
++#define DW_DMAC_CHAN_LLP 0x010
++#define DW_DMAC_CHAN_CTL 0x018
++#define DW_DMAC_CHAN_SSTAT 0x020
++#define DW_DMAC_CHAN_DSTAT 0x028
++#define DW_DMAC_CHAN_SSTATAR 0x030
++#define DW_DMAC_CHAN_DSTATAR 0x038
++#define DW_DMAC_CHAN_CFG 0x040
++#define DW_DMAC_CHAN_SGR 0x048
++#define DW_DMAC_CHAN_DSR 0x050
++
++#endif /* __AVR32_DW_DMAC_H__ */
+diff -Nrup linux-2.6.24/arch/avr32/drivers/Makefile linux-avr32/arch/avr32/drivers/Makefile
+--- linux-2.6.24/arch/avr32/drivers/Makefile 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/drivers/Makefile 2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1 @@
++obj-$(CONFIG_DW_DMAC) += dw-dmac.o
+diff -Nrup linux-2.6.24/arch/avr32/Kconfig linux-avr32/arch/avr32/Kconfig
+--- linux-2.6.24/arch/avr32/Kconfig 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/Kconfig 2008-02-01 14:51:35.000000000 -0500
+@@ -54,6 +54,9 @@ config ARCH_HAS_ILOG2_U32
+ config ARCH_HAS_ILOG2_U64
+ def_bool n
+
++config ARCH_SUPPORTS_OPROFILE
++ def_bool y
++
+ config GENERIC_HWEIGHT
+ def_bool y
+
+@@ -81,19 +84,23 @@ config PLATFORM_AT32AP
+ select MMU
+ select PERFORMANCE_COUNTERS
+
+-choice
+- prompt "AVR32 CPU type"
+- default CPU_AT32AP7000
++#
++# CPU types
++#
+
+-config CPU_AT32AP7000
+- bool "AT32AP7000"
++# AP7000 derivatives
++config CPU_AT32AP700X
++ bool
+ select PLATFORM_AT32AP
+-endchoice
+-
+-#
+-# CPU Daughterboards for ATSTK1000
+-config BOARD_ATSTK1002
++config CPU_AT32AP7000
++ bool
++ select CPU_AT32AP700X
++config CPU_AT32AP7001
+ bool
++ select CPU_AT32AP700X
++config CPU_AT32AP7002
++ bool
++ select CPU_AT32AP700X
+
+ choice
+ prompt "AVR32 board type"
+@@ -101,15 +108,18 @@ choice
+
+ config BOARD_ATSTK1000
+ bool "ATSTK1000 evaluation board"
+- select BOARD_ATSTK1002 if CPU_AT32AP7000
+
+ config BOARD_ATNGW100
+ bool "ATNGW100 Network Gateway"
++ select CPU_AT32AP7000
+ endchoice
+
+ if BOARD_ATSTK1000
+ source "arch/avr32/boards/atstk1000/Kconfig"
+ endif
++if BOARD_ATNGW100
++source "arch/avr32/boards/atngw100/Kconfig"
++endif
+
+ choice
+ prompt "Boot loader type"
+@@ -123,15 +133,15 @@ source "arch/avr32/mach-at32ap/Kconfig"
+
+ config LOAD_ADDRESS
+ hex
+- default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
++ default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
+
+ config ENTRY_ADDRESS
+ hex
+- default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
++ default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
+
+ config PHYS_OFFSET
+ hex
+- default 0x10000000 if CPU_AT32AP7000=y
++ default 0x10000000 if CPU_AT32AP700X=y
+
+ source "kernel/Kconfig.preempt"
+
+@@ -163,6 +173,20 @@ config OWNERSHIP_TRACE
+ enabling Nexus-compliant debuggers to keep track of the PID of the
+ currently executing task.
+
++config NMI_DEBUGGING
++ bool "NMI Debugging"
++ default n
++ help
++ Say Y here and pass the nmi_debug command-line parameter to
++ the kernel to turn on NMI debugging. Depending on the value
++ of the nmi_debug option, various pieces of information will
++ be dumped to the console when a Non-Maskable Interrupt
++ happens.
++
++config DW_DMAC
++ tristate "Synopsys DesignWare DMA Controller support"
++ default y if CPU_AT32AP7000
++
+ # FPU emulation goes here
+
+ source "kernel/Kconfig.hz"
+@@ -219,6 +243,8 @@ source "drivers/Kconfig"
+
+ source "fs/Kconfig"
+
++source "kernel/Kconfig.instrumentation"
++
+ source "arch/avr32/Kconfig.debug"
+
+ source "security/Kconfig"
+diff -Nrup linux-2.6.24/arch/avr32/Kconfig.debug linux-avr32/arch/avr32/Kconfig.debug
+--- linux-2.6.24/arch/avr32/Kconfig.debug 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/Kconfig.debug 2008-02-01 14:51:35.000000000 -0500
+@@ -6,14 +6,4 @@ config TRACE_IRQFLAGS_SUPPORT
+
+ source "lib/Kconfig.debug"
+
+-config KPROBES
+- bool "Kprobes"
+- depends on DEBUG_KERNEL
+- help
+- Kprobes allows you to trap at almost any kernel address and
+- execute a callback function. register_kprobe() establishes
+- a probepoint and specifies the callback. Kprobes is useful
+- for kernel debugging, non-intrusive instrumentation and testing.
+- If in doubt, say "N".
+-
+ endmenu
+diff -Nrup linux-2.6.24/arch/avr32/kernel/cpu.c linux-avr32/arch/avr32/kernel/cpu.c
+--- linux-2.6.24/arch/avr32/kernel/cpu.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/cpu.c 2008-02-01 14:51:35.000000000 -0500
+@@ -13,6 +13,7 @@
+ #include <linux/percpu.h>
+ #include <linux/param.h>
+ #include <linux/errno.h>
++#include <linux/clk.h>
+
+ #include <asm/setup.h>
+ #include <asm/sysreg.h>
+@@ -187,9 +188,20 @@ static int __init topology_init(void)
+
+ subsys_initcall(topology_init);
+
++struct chip_id_map {
++ u16 mid;
++ u16 pn;
++ const char *name;
++};
++
++static const struct chip_id_map chip_names[] = {
++ { .mid = 0x1f, .pn = 0x1e82, .name = "AT32AP700x" },
++};
++#define NR_CHIP_NAMES ARRAY_SIZE(chip_names)
++
+ static const char *cpu_names[] = {
+ "Morgan",
+- "AP7000",
++ "AP7",
+ };
+ #define NR_CPU_NAMES ARRAY_SIZE(cpu_names)
+
+@@ -206,12 +218,32 @@ static const char *mmu_types[] = {
+ "MPU"
+ };
+
++static const char *cpu_feature_flags[] = {
++ "rmw", "dsp", "simd", "ocd", "perfctr", "java", "fpu",
++};
++
++static const char *get_chip_name(struct avr32_cpuinfo *cpu)
++{
++ unsigned int i;
++ unsigned int mid = avr32_get_manufacturer_id(cpu);
++ unsigned int pn = avr32_get_product_number(cpu);
++
++ for (i = 0; i < NR_CHIP_NAMES; i++) {
++ if (chip_names[i].mid == mid && chip_names[i].pn == pn)
++ return chip_names[i].name;
++ }
++
++ return "(unknown)";
++}
++
+ void __init setup_processor(void)
+ {
+ unsigned long config0, config1;
+ unsigned long features;
+ unsigned cpu_id, cpu_rev, arch_id, arch_rev, mmu_type;
++ unsigned device_id;
+ unsigned tmp;
++ unsigned i;
+
+ config0 = sysreg_read(CONFIG0);
+ config1 = sysreg_read(CONFIG1);
+@@ -221,11 +253,14 @@ void __init setup_processor(void)
+ arch_rev = SYSREG_BFEXT(AR, config0);
+ mmu_type = SYSREG_BFEXT(MMUT, config0);
+
++ device_id = ocd_read(DID);
++
+ boot_cpu_data.arch_type = arch_id;
+ boot_cpu_data.cpu_type = cpu_id;
+ boot_cpu_data.arch_revision = arch_rev;
+ boot_cpu_data.cpu_revision = cpu_rev;
+ boot_cpu_data.tlb_config = mmu_type;
++ boot_cpu_data.device_id = device_id;
+
+ tmp = SYSREG_BFEXT(ILSZ, config1);
+ if (tmp) {
+@@ -247,41 +282,34 @@ void __init setup_processor(void)
+ return;
+ }
+
+- printk ("CPU: %s [%02x] revision %d (%s revision %d)\n",
++ printk ("CPU: %s chip revision %c\n", get_chip_name(&boot_cpu_data),
++ avr32_get_chip_revision(&boot_cpu_data) + 'A');
++ printk ("CPU: %s [%02x] core revision %d (%s arch revision %d)\n",
+ cpu_names[cpu_id], cpu_id, cpu_rev,
+ arch_names[arch_id], arch_rev);
+ printk ("CPU: MMU configuration: %s\n", mmu_types[mmu_type]);
+
+ printk ("CPU: features:");
+ features = 0;
+- if (config0 & SYSREG_BIT(CONFIG0_R)) {
++ if (config0 & SYSREG_BIT(CONFIG0_R))
+ features |= AVR32_FEATURE_RMW;
+- printk(" rmw");
+- }
+- if (config0 & SYSREG_BIT(CONFIG0_D)) {
++ if (config0 & SYSREG_BIT(CONFIG0_D))
+ features |= AVR32_FEATURE_DSP;
+- printk(" dsp");
+- }
+- if (config0 & SYSREG_BIT(CONFIG0_S)) {
++ if (config0 & SYSREG_BIT(CONFIG0_S))
+ features |= AVR32_FEATURE_SIMD;
+- printk(" simd");
+- }
+- if (config0 & SYSREG_BIT(CONFIG0_O)) {
++ if (config0 & SYSREG_BIT(CONFIG0_O))
+ features |= AVR32_FEATURE_OCD;
+- printk(" ocd");
+- }
+- if (config0 & SYSREG_BIT(CONFIG0_P)) {
++ if (config0 & SYSREG_BIT(CONFIG0_P))
+ features |= AVR32_FEATURE_PCTR;
+- printk(" perfctr");
+- }
+- if (config0 & SYSREG_BIT(CONFIG0_J)) {
++ if (config0 & SYSREG_BIT(CONFIG0_J))
+ features |= AVR32_FEATURE_JAVA;
+- printk(" java");
+- }
+- if (config0 & SYSREG_BIT(CONFIG0_F)) {
++ if (config0 & SYSREG_BIT(CONFIG0_F))
+ features |= AVR32_FEATURE_FPU;
+- printk(" fpu");
+- }
++
++ for (i = 0; i < ARRAY_SIZE(cpu_feature_flags); i++)
++ if (features & (1 << i))
++ printk(" %s", cpu_feature_flags[i]);
++
+ printk("\n");
+ boot_cpu_data.features = features;
+ }
+@@ -291,6 +319,8 @@ static int c_show(struct seq_file *m, vo
+ {
+ unsigned int icache_size, dcache_size;
+ unsigned int cpu = smp_processor_id();
++ unsigned int freq;
++ unsigned int i;
+
+ icache_size = boot_cpu_data.icache.ways *
+ boot_cpu_data.icache.sets *
+@@ -301,15 +331,21 @@ static int c_show(struct seq_file *m, vo
+
+ seq_printf(m, "processor\t: %d\n", cpu);
+
++ seq_printf(m, "chip type\t: %s revision %c\n",
++ get_chip_name(&boot_cpu_data),
++ avr32_get_chip_revision(&boot_cpu_data) + 'A');
+ if (boot_cpu_data.arch_type < NR_ARCH_NAMES)
+- seq_printf(m, "cpu family\t: %s revision %d\n",
++ seq_printf(m, "cpu arch\t: %s revision %d\n",
+ arch_names[boot_cpu_data.arch_type],
+ boot_cpu_data.arch_revision);
+ if (boot_cpu_data.cpu_type < NR_CPU_NAMES)
+- seq_printf(m, "cpu type\t: %s revision %d\n",
++ seq_printf(m, "cpu core\t: %s revision %d\n",
+ cpu_names[boot_cpu_data.cpu_type],
+ boot_cpu_data.cpu_revision);
+
++ freq = (clk_get_rate(boot_cpu_data.clk) + 500) / 1000;
++ seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, freq % 1000);
++
+ seq_printf(m, "i-cache\t\t: %dK (%u ways x %u sets x %u)\n",
+ icache_size >> 10,
+ boot_cpu_data.icache.ways,
+@@ -320,7 +356,13 @@ static int c_show(struct seq_file *m, vo
+ boot_cpu_data.dcache.ways,
+ boot_cpu_data.dcache.sets,
+ boot_cpu_data.dcache.linesz);
+- seq_printf(m, "bogomips\t: %lu.%02lu\n",
++
++ seq_printf(m, "features\t:");
++ for (i = 0; i < ARRAY_SIZE(cpu_feature_flags); i++)
++ if (boot_cpu_data.features & (1 << i))
++ seq_printf(m, " %s", cpu_feature_flags[i]);
++
++ seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
+ boot_cpu_data.loops_per_jiffy / (500000/HZ),
+ (boot_cpu_data.loops_per_jiffy / (5000/HZ)) % 100);
+
+@@ -343,7 +385,7 @@ static void c_stop(struct seq_file *m, v
+
+ }
+
+-struct seq_operations cpuinfo_op = {
++const struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+diff -Nrup linux-2.6.24/arch/avr32/kernel/dma-controller.c linux-avr32/arch/avr32/kernel/dma-controller.c
+--- linux-2.6.24/arch/avr32/kernel/dma-controller.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/dma-controller.c 2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,34 @@
++/*
++ * Preliminary DMA controller framework for AVR32
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <asm/dma-controller.h>
++
++static LIST_HEAD(controllers);
++
++int register_dma_controller(struct dma_controller *dmac)
++{
++ static int next_id;
++
++ dmac->id = next_id++;
++ list_add_tail(&dmac->list, &controllers);
++
++ return 0;
++}
++EXPORT_SYMBOL(register_dma_controller);
++
++struct dma_controller *find_dma_controller(int id)
++{
++ struct dma_controller *dmac;
++
++ list_for_each_entry(dmac, &controllers, list)
++ if (dmac->id == id)
++ return dmac;
++ return NULL;
++}
++EXPORT_SYMBOL(find_dma_controller);
+diff -Nrup linux-2.6.24/arch/avr32/kernel/irq.c linux-avr32/arch/avr32/kernel/irq.c
+--- linux-2.6.24/arch/avr32/kernel/irq.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/irq.c 2008-02-01 14:51:35.000000000 -0500
+@@ -25,6 +25,17 @@ void ack_bad_irq(unsigned int irq)
+ printk("unexpected IRQ %u\n", irq);
+ }
+
++/* May be overridden by platform code */
++int __weak nmi_enable(void)
++{
++ return -ENOSYS;
++}
++
++void __weak nmi_disable(void)
++{
++
++}
++
+ #ifdef CONFIG_PROC_FS
+ int show_interrupts(struct seq_file *p, void *v)
+ {
+diff -Nrup linux-2.6.24/arch/avr32/kernel/kprobes.c linux-avr32/arch/avr32/kernel/kprobes.c
+--- linux-2.6.24/arch/avr32/kernel/kprobes.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/kprobes.c 2008-02-01 14:51:35.000000000 -0500
+@@ -48,6 +48,7 @@ int __kprobes arch_prepare_kprobe(struct
+ void __kprobes arch_arm_kprobe(struct kprobe *p)
+ {
+ pr_debug("arming kprobe at %p\n", p->addr);
++ ocd_enable(NULL);
+ *p->addr = BREAKPOINT_INSTRUCTION;
+ flush_icache_range((unsigned long)p->addr,
+ (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+@@ -56,6 +57,7 @@ void __kprobes arch_arm_kprobe(struct kp
+ void __kprobes arch_disarm_kprobe(struct kprobe *p)
+ {
+ pr_debug("disarming kprobe at %p\n", p->addr);
++ ocd_disable(NULL);
+ *p->addr = p->opcode;
+ flush_icache_range((unsigned long)p->addr,
+ (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+@@ -260,9 +262,6 @@ int __kprobes longjmp_break_handler(stru
+
+ int __init arch_init_kprobes(void)
+ {
+- printk("KPROBES: Enabling monitor mode (MM|DBE)...\n");
+- ocd_write(DC, (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT));
+-
+ /* TODO: Register kretprobe trampoline */
+ return 0;
+ }
+diff -Nrup linux-2.6.24/arch/avr32/kernel/Makefile linux-avr32/arch/avr32/kernel/Makefile
+--- linux-2.6.24/arch/avr32/kernel/Makefile 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/Makefile 2008-02-01 14:51:35.000000000 -0500
+@@ -6,9 +6,11 @@ extra-y := head.o vmlinux.lds
+
+ obj-$(CONFIG_SUBARCH_AVR32B) += entry-avr32b.o
+ obj-y += syscall_table.o syscall-stubs.o irq.o
+-obj-y += setup.o traps.o semaphore.o ptrace.o
++obj-y += setup.o traps.o semaphore.o ocd.o ptrace.o
+ obj-y += signal.o sys_avr32.o process.o time.o
+ obj-y += init_task.o switch_to.o cpu.o
++obj-y += dma-controller.o
+ obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
+ obj-$(CONFIG_KPROBES) += kprobes.o
+ obj-$(CONFIG_STACKTRACE) += stacktrace.o
++obj-$(CONFIG_NMI_DEBUGGING) += nmi_debug.o
+diff -Nrup linux-2.6.24/arch/avr32/kernel/nmi_debug.c linux-avr32/arch/avr32/kernel/nmi_debug.c
+--- linux-2.6.24/arch/avr32/kernel/nmi_debug.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/nmi_debug.c 2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,82 @@
++/*
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/delay.h>
++#include <linux/kdebug.h>
++#include <linux/notifier.h>
++#include <linux/sched.h>
++
++#include <asm/irq.h>
++
++enum nmi_action {
++ NMI_SHOW_STATE = 1 << 0,
++ NMI_SHOW_REGS = 1 << 1,
++ NMI_DIE = 1 << 2,
++ NMI_DEBOUNCE = 1 << 3,
++};
++
++static unsigned long nmi_actions;
++
++static int nmi_debug_notify(struct notifier_block *self,
++ unsigned long val, void *data)
++{
++ struct die_args *args = data;
++
++ if (likely(val != DIE_NMI))
++ return NOTIFY_DONE;
++
++ if (nmi_actions & NMI_SHOW_STATE)
++ show_state();
++ if (nmi_actions & NMI_SHOW_REGS)
++ show_regs(args->regs);
++ if (nmi_actions & NMI_DEBOUNCE)
++ mdelay(10);
++ if (nmi_actions & NMI_DIE)
++ return NOTIFY_BAD;
++
++ return NOTIFY_OK;
++}
++
++static struct notifier_block nmi_debug_nb = {
++ .notifier_call = nmi_debug_notify,
++};
++
++static int __init nmi_debug_setup(char *str)
++{
++ char *p, *sep;
++
++ register_die_notifier(&nmi_debug_nb);
++ if (nmi_enable()) {
++ printk(KERN_WARNING "Unable to enable NMI.\n");
++ return 0;
++ }
++
++ if (*str != '=')
++ return 0;
++
++ for (p = str + 1; *p; p = sep + 1) {
++ sep = strchr(p, ',');
++ if (sep)
++ *sep = 0;
++ if (strcmp(p, "state") == 0)
++ nmi_actions |= NMI_SHOW_STATE;
++ else if (strcmp(p, "regs") == 0)
++ nmi_actions |= NMI_SHOW_REGS;
++ else if (strcmp(p, "debounce") == 0)
++ nmi_actions |= NMI_DEBOUNCE;
++ else if (strcmp(p, "die") == 0)
++ nmi_actions |= NMI_DIE;
++ else
++ printk(KERN_WARNING "NMI: Unrecognized action `%s'\n",
++ p);
++ if (!sep)
++ break;
++ }
++
++ return 0;
++}
++__setup("nmi_debug", nmi_debug_setup);
+diff -Nrup linux-2.6.24/arch/avr32/kernel/ocd.c linux-avr32/arch/avr32/kernel/ocd.c
+--- linux-2.6.24/arch/avr32/kernel/ocd.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/ocd.c 2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,163 @@
++/*
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/spinlock.h>
++
++#include <asm/ocd.h>
++
++static long ocd_count;
++static spinlock_t ocd_lock;
++
++/**
++ * ocd_enable - enable on-chip debugging
++ * @child: task to be debugged
++ *
++ * If @child is non-NULL, ocd_enable() first checks if debugging has
++ * already been enabled for @child, and if it has, does nothing.
++ *
++ * If @child is NULL (e.g. when debugging the kernel), or debugging
++ * has not already been enabled for it, ocd_enable() increments the
++ * reference count and enables the debugging hardware.
++ */
++void ocd_enable(struct task_struct *child)
++{
++ u32 dc;
++
++ if (child)
++ pr_debug("ocd_enable: child=%s [%u]\n",
++ child->comm, child->pid);
++ else
++ pr_debug("ocd_enable (no child)\n");
++
++ if (!child || !test_and_set_tsk_thread_flag(child, TIF_DEBUG)) {
++ spin_lock(&ocd_lock);
++ ocd_count++;
++ dc = ocd_read(DC);
++ dc |= (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT);
++ ocd_write(DC, dc);
++ spin_unlock(&ocd_lock);
++ }
++}
++
++/**
++ * ocd_disable - disable on-chip debugging
++ * @child: task that was being debugged, but isn't anymore
++ *
++ * If @child is non-NULL, ocd_disable() checks if debugging is enabled
++ * for @child, and if it isn't, does nothing.
++ *
++ * If @child is NULL (e.g. when debugging the kernel), or debugging is
++ * enabled, ocd_disable() decrements the reference count, and if it
++ * reaches zero, disables the debugging hardware.
++ */
++void ocd_disable(struct task_struct *child)
++{
++ u32 dc;
++
++ if (!child)
++ pr_debug("ocd_disable (no child)\n");
++ else if (test_tsk_thread_flag(child, TIF_DEBUG))
++ pr_debug("ocd_disable: child=%s [%u]\n",
++ child->comm, child->pid);
++
++ if (!child || test_and_clear_tsk_thread_flag(child, TIF_DEBUG)) {
++ spin_lock(&ocd_lock);
++ ocd_count--;
++
++ WARN_ON(ocd_count < 0);
++
++ if (ocd_count <= 0) {
++ dc = ocd_read(DC);
++ dc &= ~((1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT));
++ ocd_write(DC, dc);
++ }
++ spin_unlock(&ocd_lock);
++ }
++}
++
++#ifdef CONFIG_DEBUG_FS
++#include <linux/debugfs.h>
++#include <linux/module.h>
++
++static struct dentry *ocd_debugfs_root;
++static struct dentry *ocd_debugfs_DC;
++static struct dentry *ocd_debugfs_DS;
++static struct dentry *ocd_debugfs_count;
++
++static u64 ocd_DC_get(void *data)
++{
++ return ocd_read(DC);
++}
++static void ocd_DC_set(void *data, u64 val)
++{
++ ocd_write(DC, val);
++}
++DEFINE_SIMPLE_ATTRIBUTE(fops_DC, ocd_DC_get, ocd_DC_set, "0x%08llx\n");
++
++static u64 ocd_DS_get(void *data)
++{
++ return ocd_read(DS);
++}
++DEFINE_SIMPLE_ATTRIBUTE(fops_DS, ocd_DS_get, NULL, "0x%08llx\n");
++
++static u64 ocd_count_get(void *data)
++{
++ return ocd_count;
++}
++DEFINE_SIMPLE_ATTRIBUTE(fops_count, ocd_count_get, NULL, "%lld\n");
++
++static void ocd_debugfs_init(void)
++{
++ struct dentry *root;
++
++ root = debugfs_create_dir("ocd", NULL);
++ if (IS_ERR(root) || !root)
++ goto err_root;
++ ocd_debugfs_root = root;
++
++ ocd_debugfs_DC = debugfs_create_file("DC", S_IRUSR | S_IWUSR,
++ root, NULL, &fops_DC);
++ if (!ocd_debugfs_DC)
++ goto err_DC;
++
++ ocd_debugfs_DS = debugfs_create_file("DS", S_IRUSR, root,
++ NULL, &fops_DS);
++ if (!ocd_debugfs_DS)
++ goto err_DS;
++
++ ocd_debugfs_count = debugfs_create_file("count", S_IRUSR, root,
++ NULL, &fops_count);
++ if (!ocd_debugfs_count)
++ goto err_count;
++
++ return;
++
++err_count:
++ debugfs_remove(ocd_debugfs_DS);
++err_DS:
++ debugfs_remove(ocd_debugfs_DC);
++err_DC:
++ debugfs_remove(ocd_debugfs_root);
++err_root:
++ printk(KERN_WARNING "OCD: Failed to create debugfs entries\n");
++}
++#else
++static inline void ocd_debugfs_init(void)
++{
++
++}
++#endif
++
++static int __init ocd_init(void)
++{
++ spin_lock_init(&ocd_lock);
++ ocd_debugfs_init();
++ return 0;
++}
++arch_initcall(ocd_init);
+diff -Nrup linux-2.6.24/arch/avr32/kernel/process.c linux-avr32/arch/avr32/kernel/process.c
+--- linux-2.6.24/arch/avr32/kernel/process.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/process.c 2008-02-01 14:51:35.000000000 -0500
+@@ -103,7 +103,7 @@ EXPORT_SYMBOL(kernel_thread);
+ */
+ void exit_thread(void)
+ {
+- /* nothing to do */
++ ocd_disable(current);
+ }
+
+ void flush_thread(void)
+@@ -345,6 +345,9 @@ int copy_thread(int nr, unsigned long cl
+ p->thread.cpu_context.ksp = (unsigned long)childregs;
+ p->thread.cpu_context.pc = (unsigned long)ret_from_fork;
+
++ if ((clone_flags & CLONE_PTRACE) && test_thread_flag(TIF_DEBUG))
++ ocd_enable(p);
++
+ return 0;
+ }
+
+diff -Nrup linux-2.6.24/arch/avr32/kernel/ptrace.c linux-avr32/arch/avr32/kernel/ptrace.c
+--- linux-2.6.24/arch/avr32/kernel/ptrace.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/ptrace.c 2008-02-01 14:51:35.000000000 -0500
+@@ -58,6 +58,7 @@ void ptrace_disable(struct task_struct *
+ {
+ clear_tsk_thread_flag(child, TIF_SINGLE_STEP);
+ clear_tsk_thread_flag(child, TIF_BREAKPOINT);
++ ocd_disable(child);
+ }
+
+ /*
+@@ -144,10 +145,6 @@ long arch_ptrace(struct task_struct *chi
+ {
+ int ret;
+
+- pr_debug("ptrace: Enabling monitor mode...\n");
+- ocd_write(DC, ocd_read(DC) | (1 << OCD_DC_MM_BIT)
+- | (1 << OCD_DC_DBE_BIT));
+-
+ switch (request) {
+ /* Read the word at location addr in the child process */
+ case PTRACE_PEEKTEXT:
+diff -Nrup linux-2.6.24/arch/avr32/kernel/setup.c linux-avr32/arch/avr32/kernel/setup.c
+--- linux-2.6.24/arch/avr32/kernel/setup.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/setup.c 2008-02-01 14:51:35.000000000 -0500
+@@ -273,6 +273,8 @@ static int __init early_parse_fbmem(char
+ printk(KERN_WARNING
+ "Failed to allocate framebuffer memory\n");
+ fbmem_size = 0;
++ } else {
++ memset(__va(fbmem_start), 0, fbmem_size);
+ }
+ }
+
+diff -Nrup linux-2.6.24/arch/avr32/kernel/signal.c linux-avr32/arch/avr32/kernel/signal.c
+--- linux-2.6.24/arch/avr32/kernel/signal.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/signal.c 2008-02-01 14:51:35.000000000 -0500
+@@ -270,19 +270,12 @@ int do_signal(struct pt_regs *regs, sigs
+ if (!user_mode(regs))
+ return 0;
+
+- if (try_to_freeze()) {
+- signr = 0;
+- if (!signal_pending(current))
+- goto no_signal;
+- }
+-
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = &current->saved_sigmask;
+ else if (!oldset)
+ oldset = &current->blocked;
+
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+-no_signal:
+ if (syscall) {
+ switch (regs->r12) {
+ case -ERESTART_RESTARTBLOCK:
+diff -Nrup linux-2.6.24/arch/avr32/kernel/traps.c linux-avr32/arch/avr32/kernel/traps.c
+--- linux-2.6.24/arch/avr32/kernel/traps.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/kernel/traps.c 2008-02-01 14:51:35.000000000 -0500
+@@ -9,6 +9,7 @@
+ #include <linux/bug.h>
+ #include <linux/init.h>
+ #include <linux/kallsyms.h>
++#include <linux/kdebug.h>
+ #include <linux/module.h>
+ #include <linux/notifier.h>
+ #include <linux/sched.h>
+@@ -107,9 +108,23 @@ void _exception(long signr, struct pt_re
+
+ asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
+ {
+- printk(KERN_ALERT "Got Non-Maskable Interrupt, dumping regs\n");
+- show_regs_log_lvl(regs, KERN_ALERT);
+- show_stack_log_lvl(current, regs->sp, regs, KERN_ALERT);
++ int ret;
++
++ nmi_enter();
++
++ ret = notify_die(DIE_NMI, "NMI", regs, 0, ecr, SIGINT);
++ switch (ret) {
++ case NOTIFY_OK:
++ case NOTIFY_STOP:
++ return;
++ case NOTIFY_BAD:
++ die("Fatal Non-Maskable Interrupt", regs, SIGINT);
++ default:
++ break;
++ }
++
++ printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
++ nmi_disable();
+ }
+
+ asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
+diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/at32ap7000.c linux-avr32/arch/avr32/mach-at32ap/at32ap7000.c
+--- linux-2.6.24/arch/avr32/mach-at32ap/at32ap7000.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/mach-at32ap/at32ap7000.c 1969-12-31 19:00:00.000000000 -0500
+@@ -1,1730 +0,0 @@
+-/*
+- * Copyright (C) 2005-2006 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-#include <linux/clk.h>
+-#include <linux/fb.h>
+-#include <linux/init.h>
+-#include <linux/platform_device.h>
+-#include <linux/dma-mapping.h>
+-#include <linux/spi/spi.h>
+-
+-#include <asm/io.h>
+-
+-#include <asm/arch/at32ap7000.h>
+-#include <asm/arch/board.h>
+-#include <asm/arch/portmux.h>
+-
+-#include <video/atmel_lcdc.h>
+-
+-#include "clock.h"
+-#include "hmatrix.h"
+-#include "pio.h"
+-#include "pm.h"
+-
+-
+-#define PBMEM(base) \
+- { \
+- .start = base, \
+- .end = base + 0x3ff, \
+- .flags = IORESOURCE_MEM, \
+- }
+-#define IRQ(num) \
+- { \
+- .start = num, \
+- .end = num, \
+- .flags = IORESOURCE_IRQ, \
+- }
+-#define NAMED_IRQ(num, _name) \
+- { \
+- .start = num, \
+- .end = num, \
+- .name = _name, \
+- .flags = IORESOURCE_IRQ, \
+- }
+-
+-/* REVISIT these assume *every* device supports DMA, but several
+- * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
+- */
+-#define DEFINE_DEV(_name, _id) \
+-static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
+-static struct platform_device _name##_id##_device = { \
+- .name = #_name, \
+- .id = _id, \
+- .dev = { \
+- .dma_mask = &_name##_id##_dma_mask, \
+- .coherent_dma_mask = DMA_32BIT_MASK, \
+- }, \
+- .resource = _name##_id##_resource, \
+- .num_resources = ARRAY_SIZE(_name##_id##_resource), \
+-}
+-#define DEFINE_DEV_DATA(_name, _id) \
+-static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
+-static struct platform_device _name##_id##_device = { \
+- .name = #_name, \
+- .id = _id, \
+- .dev = { \
+- .dma_mask = &_name##_id##_dma_mask, \
+- .platform_data = &_name##_id##_data, \
+- .coherent_dma_mask = DMA_32BIT_MASK, \
+- }, \
+- .resource = _name##_id##_resource, \
+- .num_resources = ARRAY_SIZE(_name##_id##_resource), \
+-}
+-
+-#define select_peripheral(pin, periph, flags) \
+- at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
+-
+-#define DEV_CLK(_name, devname, bus, _index) \
+-static struct clk devname##_##_name = { \
+- .name = #_name, \
+- .dev = &devname##_device.dev, \
+- .parent = &bus##_clk, \
+- .mode = bus##_clk_mode, \
+- .get_rate = bus##_clk_get_rate, \
+- .index = _index, \
+-}
+-
+-static DEFINE_SPINLOCK(pm_lock);
+-
+-unsigned long at32ap7000_osc_rates[3] = {
+- [0] = 32768,
+- /* FIXME: these are ATSTK1002-specific */
+- [1] = 20000000,
+- [2] = 12000000,
+-};
+-
+-static unsigned long osc_get_rate(struct clk *clk)
+-{
+- return at32ap7000_osc_rates[clk->index];
+-}
+-
+-static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
+-{
+- unsigned long div, mul, rate;
+-
+- if (!(control & PM_BIT(PLLEN)))
+- return 0;
+-
+- div = PM_BFEXT(PLLDIV, control) + 1;
+- mul = PM_BFEXT(PLLMUL, control) + 1;
+-
+- rate = clk->parent->get_rate(clk->parent);
+- rate = (rate + div / 2) / div;
+- rate *= mul;
+-
+- return rate;
+-}
+-
+-static unsigned long pll0_get_rate(struct clk *clk)
+-{
+- u32 control;
+-
+- control = pm_readl(PLL0);
+-
+- return pll_get_rate(clk, control);
+-}
+-
+-static unsigned long pll1_get_rate(struct clk *clk)
+-{
+- u32 control;
+-
+- control = pm_readl(PLL1);
+-
+- return pll_get_rate(clk, control);
+-}
+-
+-/*
+- * The AT32AP7000 has five primary clock sources: One 32kHz
+- * oscillator, two crystal oscillators and two PLLs.
+- */
+-static struct clk osc32k = {
+- .name = "osc32k",
+- .get_rate = osc_get_rate,
+- .users = 1,
+- .index = 0,
+-};
+-static struct clk osc0 = {
+- .name = "osc0",
+- .get_rate = osc_get_rate,
+- .users = 1,
+- .index = 1,
+-};
+-static struct clk osc1 = {
+- .name = "osc1",
+- .get_rate = osc_get_rate,
+- .index = 2,
+-};
+-static struct clk pll0 = {
+- .name = "pll0",
+- .get_rate = pll0_get_rate,
+- .parent = &osc0,
+-};
+-static struct clk pll1 = {
+- .name = "pll1",
+- .get_rate = pll1_get_rate,
+- .parent = &osc0,
+-};
+-
+-/*
+- * The main clock can be either osc0 or pll0. The boot loader may
+- * have chosen one for us, so we don't really know which one until we
+- * have a look at the SM.
+- */
+-static struct clk *main_clock;
+-
+-/*
+- * Synchronous clocks are generated from the main clock. The clocks
+- * must satisfy the constraint
+- * fCPU >= fHSB >= fPB
+- * i.e. each clock must not be faster than its parent.
+- */
+-static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
+-{
+- return main_clock->get_rate(main_clock) >> shift;
+-};
+-
+-static void cpu_clk_mode(struct clk *clk, int enabled)
+-{
+- unsigned long flags;
+- u32 mask;
+-
+- spin_lock_irqsave(&pm_lock, flags);
+- mask = pm_readl(CPU_MASK);
+- if (enabled)
+- mask |= 1 << clk->index;
+- else
+- mask &= ~(1 << clk->index);
+- pm_writel(CPU_MASK, mask);
+- spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long cpu_clk_get_rate(struct clk *clk)
+-{
+- unsigned long cksel, shift = 0;
+-
+- cksel = pm_readl(CKSEL);
+- if (cksel & PM_BIT(CPUDIV))
+- shift = PM_BFEXT(CPUSEL, cksel) + 1;
+-
+- return bus_clk_get_rate(clk, shift);
+-}
+-
+-static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
+-{
+- u32 control;
+- unsigned long parent_rate, child_div, actual_rate, div;
+-
+- parent_rate = clk->parent->get_rate(clk->parent);
+- control = pm_readl(CKSEL);
+-
+- if (control & PM_BIT(HSBDIV))
+- child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
+- else
+- child_div = 1;
+-
+- if (rate > 3 * (parent_rate / 4) || child_div == 1) {
+- actual_rate = parent_rate;
+- control &= ~PM_BIT(CPUDIV);
+- } else {
+- unsigned int cpusel;
+- div = (parent_rate + rate / 2) / rate;
+- if (div > child_div)
+- div = child_div;
+- cpusel = (div > 1) ? (fls(div) - 2) : 0;
+- control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
+- actual_rate = parent_rate / (1 << (cpusel + 1));
+- }
+-
+- pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
+- clk->name, rate, actual_rate);
+-
+- if (apply)
+- pm_writel(CKSEL, control);
+-
+- return actual_rate;
+-}
+-
+-static void hsb_clk_mode(struct clk *clk, int enabled)
+-{
+- unsigned long flags;
+- u32 mask;
+-
+- spin_lock_irqsave(&pm_lock, flags);
+- mask = pm_readl(HSB_MASK);
+- if (enabled)
+- mask |= 1 << clk->index;
+- else
+- mask &= ~(1 << clk->index);
+- pm_writel(HSB_MASK, mask);
+- spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long hsb_clk_get_rate(struct clk *clk)
+-{
+- unsigned long cksel, shift = 0;
+-
+- cksel = pm_readl(CKSEL);
+- if (cksel & PM_BIT(HSBDIV))
+- shift = PM_BFEXT(HSBSEL, cksel) + 1;
+-
+- return bus_clk_get_rate(clk, shift);
+-}
+-
+-static void pba_clk_mode(struct clk *clk, int enabled)
+-{
+- unsigned long flags;
+- u32 mask;
+-
+- spin_lock_irqsave(&pm_lock, flags);
+- mask = pm_readl(PBA_MASK);
+- if (enabled)
+- mask |= 1 << clk->index;
+- else
+- mask &= ~(1 << clk->index);
+- pm_writel(PBA_MASK, mask);
+- spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long pba_clk_get_rate(struct clk *clk)
+-{
+- unsigned long cksel, shift = 0;
+-
+- cksel = pm_readl(CKSEL);
+- if (cksel & PM_BIT(PBADIV))
+- shift = PM_BFEXT(PBASEL, cksel) + 1;
+-
+- return bus_clk_get_rate(clk, shift);
+-}
+-
+-static void pbb_clk_mode(struct clk *clk, int enabled)
+-{
+- unsigned long flags;
+- u32 mask;
+-
+- spin_lock_irqsave(&pm_lock, flags);
+- mask = pm_readl(PBB_MASK);
+- if (enabled)
+- mask |= 1 << clk->index;
+- else
+- mask &= ~(1 << clk->index);
+- pm_writel(PBB_MASK, mask);
+- spin_unlock_irqrestore(&pm_lock, flags);
+-}
+-
+-static unsigned long pbb_clk_get_rate(struct clk *clk)
+-{
+- unsigned long cksel, shift = 0;
+-
+- cksel = pm_readl(CKSEL);
+- if (cksel & PM_BIT(PBBDIV))
+- shift = PM_BFEXT(PBBSEL, cksel) + 1;
+-
+- return bus_clk_get_rate(clk, shift);
+-}
+-
+-static struct clk cpu_clk = {
+- .name = "cpu",
+- .get_rate = cpu_clk_get_rate,
+- .set_rate = cpu_clk_set_rate,
+- .users = 1,
+-};
+-static struct clk hsb_clk = {
+- .name = "hsb",
+- .parent = &cpu_clk,
+- .get_rate = hsb_clk_get_rate,
+-};
+-static struct clk pba_clk = {
+- .name = "pba",
+- .parent = &hsb_clk,
+- .mode = hsb_clk_mode,
+- .get_rate = pba_clk_get_rate,
+- .index = 1,
+-};
+-static struct clk pbb_clk = {
+- .name = "pbb",
+- .parent = &hsb_clk,
+- .mode = hsb_clk_mode,
+- .get_rate = pbb_clk_get_rate,
+- .users = 1,
+- .index = 2,
+-};
+-
+-/* --------------------------------------------------------------------
+- * Generic Clock operations
+- * -------------------------------------------------------------------- */
+-
+-static void genclk_mode(struct clk *clk, int enabled)
+-{
+- u32 control;
+-
+- control = pm_readl(GCCTRL(clk->index));
+- if (enabled)
+- control |= PM_BIT(CEN);
+- else
+- control &= ~PM_BIT(CEN);
+- pm_writel(GCCTRL(clk->index), control);
+-}
+-
+-static unsigned long genclk_get_rate(struct clk *clk)
+-{
+- u32 control;
+- unsigned long div = 1;
+-
+- control = pm_readl(GCCTRL(clk->index));
+- if (control & PM_BIT(DIVEN))
+- div = 2 * (PM_BFEXT(DIV, control) + 1);
+-
+- return clk->parent->get_rate(clk->parent) / div;
+-}
+-
+-static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
+-{
+- u32 control;
+- unsigned long parent_rate, actual_rate, div;
+-
+- parent_rate = clk->parent->get_rate(clk->parent);
+- control = pm_readl(GCCTRL(clk->index));
+-
+- if (rate > 3 * parent_rate / 4) {
+- actual_rate = parent_rate;
+- control &= ~PM_BIT(DIVEN);
+- } else {
+- div = (parent_rate + rate) / (2 * rate) - 1;
+- control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
+- actual_rate = parent_rate / (2 * (div + 1));
+- }
+-
+- dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
+- clk->name, rate, actual_rate);
+-
+- if (apply)
+- pm_writel(GCCTRL(clk->index), control);
+-
+- return actual_rate;
+-}
+-
+-int genclk_set_parent(struct clk *clk, struct clk *parent)
+-{
+- u32 control;
+-
+- dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
+- clk->name, parent->name, clk->parent->name);
+-
+- control = pm_readl(GCCTRL(clk->index));
+-
+- if (parent == &osc1 || parent == &pll1)
+- control |= PM_BIT(OSCSEL);
+- else if (parent == &osc0 || parent == &pll0)
+- control &= ~PM_BIT(OSCSEL);
+- else
+- return -EINVAL;
+-
+- if (parent == &pll0 || parent == &pll1)
+- control |= PM_BIT(PLLSEL);
+- else
+- control &= ~PM_BIT(PLLSEL);
+-
+- pm_writel(GCCTRL(clk->index), control);
+- clk->parent = parent;
+-
+- return 0;
+-}
+-
+-static void __init genclk_init_parent(struct clk *clk)
+-{
+- u32 control;
+- struct clk *parent;
+-
+- BUG_ON(clk->index > 7);
+-
+- control = pm_readl(GCCTRL(clk->index));
+- if (control & PM_BIT(OSCSEL))
+- parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
+- else
+- parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
+-
+- clk->parent = parent;
+-}
+-
+-/* --------------------------------------------------------------------
+- * System peripherals
+- * -------------------------------------------------------------------- */
+-static struct resource at32_pm0_resource[] = {
+- {
+- .start = 0xfff00000,
+- .end = 0xfff0007f,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(20),
+-};
+-
+-static struct resource at32ap700x_rtc0_resource[] = {
+- {
+- .start = 0xfff00080,
+- .end = 0xfff000af,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(21),
+-};
+-
+-static struct resource at32_wdt0_resource[] = {
+- {
+- .start = 0xfff000b0,
+- .end = 0xfff000cf,
+- .flags = IORESOURCE_MEM,
+- },
+-};
+-
+-static struct resource at32_eic0_resource[] = {
+- {
+- .start = 0xfff00100,
+- .end = 0xfff0013f,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(19),
+-};
+-
+-DEFINE_DEV(at32_pm, 0);
+-DEFINE_DEV(at32ap700x_rtc, 0);
+-DEFINE_DEV(at32_wdt, 0);
+-DEFINE_DEV(at32_eic, 0);
+-
+-/*
+- * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
+- * is always running.
+- */
+-static struct clk at32_pm_pclk = {
+- .name = "pclk",
+- .dev = &at32_pm0_device.dev,
+- .parent = &pbb_clk,
+- .mode = pbb_clk_mode,
+- .get_rate = pbb_clk_get_rate,
+- .users = 1,
+- .index = 0,
+-};
+-
+-static struct resource intc0_resource[] = {
+- PBMEM(0xfff00400),
+-};
+-struct platform_device at32_intc0_device = {
+- .name = "intc",
+- .id = 0,
+- .resource = intc0_resource,
+- .num_resources = ARRAY_SIZE(intc0_resource),
+-};
+-DEV_CLK(pclk, at32_intc0, pbb, 1);
+-
+-static struct clk ebi_clk = {
+- .name = "ebi",
+- .parent = &hsb_clk,
+- .mode = hsb_clk_mode,
+- .get_rate = hsb_clk_get_rate,
+- .users = 1,
+-};
+-static struct clk hramc_clk = {
+- .name = "hramc",
+- .parent = &hsb_clk,
+- .mode = hsb_clk_mode,
+- .get_rate = hsb_clk_get_rate,
+- .users = 1,
+- .index = 3,
+-};
+-
+-static struct resource smc0_resource[] = {
+- PBMEM(0xfff03400),
+-};
+-DEFINE_DEV(smc, 0);
+-DEV_CLK(pclk, smc0, pbb, 13);
+-DEV_CLK(mck, smc0, hsb, 0);
+-
+-static struct platform_device pdc_device = {
+- .name = "pdc",
+- .id = 0,
+-};
+-DEV_CLK(hclk, pdc, hsb, 4);
+-DEV_CLK(pclk, pdc, pba, 16);
+-
+-static struct clk pico_clk = {
+- .name = "pico",
+- .parent = &cpu_clk,
+- .mode = cpu_clk_mode,
+- .get_rate = cpu_clk_get_rate,
+- .users = 1,
+-};
+-
+-static struct resource dmaca0_resource[] = {
+- {
+- .start = 0xff200000,
+- .end = 0xff20ffff,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(2),
+-};
+-DEFINE_DEV(dmaca, 0);
+-DEV_CLK(hclk, dmaca0, hsb, 10);
+-
+-/* --------------------------------------------------------------------
+- * HMATRIX
+- * -------------------------------------------------------------------- */
+-
+-static struct clk hmatrix_clk = {
+- .name = "hmatrix_clk",
+- .parent = &pbb_clk,
+- .mode = pbb_clk_mode,
+- .get_rate = pbb_clk_get_rate,
+- .index = 2,
+- .users = 1,
+-};
+-#define HMATRIX_BASE ((void __iomem *)0xfff00800)
+-
+-#define hmatrix_readl(reg) \
+- __raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
+-#define hmatrix_writel(reg,value) \
+- __raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
+-
+-/*
+- * Set bits in the HMATRIX Special Function Register (SFR) used by the
+- * External Bus Interface (EBI). This can be used to enable special
+- * features like CompactFlash support, NAND Flash support, etc. on
+- * certain chipselects.
+- */
+-static inline void set_ebi_sfr_bits(u32 mask)
+-{
+- u32 sfr;
+-
+- clk_enable(&hmatrix_clk);
+- sfr = hmatrix_readl(SFR4);
+- sfr |= mask;
+- hmatrix_writel(SFR4, sfr);
+- clk_disable(&hmatrix_clk);
+-}
+-
+-/* --------------------------------------------------------------------
+- * System Timer/Counter (TC)
+- * -------------------------------------------------------------------- */
+-static struct resource at32_systc0_resource[] = {
+- PBMEM(0xfff00c00),
+- IRQ(22),
+-};
+-struct platform_device at32_systc0_device = {
+- .name = "systc",
+- .id = 0,
+- .resource = at32_systc0_resource,
+- .num_resources = ARRAY_SIZE(at32_systc0_resource),
+-};
+-DEV_CLK(pclk, at32_systc0, pbb, 3);
+-
+-/* --------------------------------------------------------------------
+- * PIO
+- * -------------------------------------------------------------------- */
+-
+-static struct resource pio0_resource[] = {
+- PBMEM(0xffe02800),
+- IRQ(13),
+-};
+-DEFINE_DEV(pio, 0);
+-DEV_CLK(mck, pio0, pba, 10);
+-
+-static struct resource pio1_resource[] = {
+- PBMEM(0xffe02c00),
+- IRQ(14),
+-};
+-DEFINE_DEV(pio, 1);
+-DEV_CLK(mck, pio1, pba, 11);
+-
+-static struct resource pio2_resource[] = {
+- PBMEM(0xffe03000),
+- IRQ(15),
+-};
+-DEFINE_DEV(pio, 2);
+-DEV_CLK(mck, pio2, pba, 12);
+-
+-static struct resource pio3_resource[] = {
+- PBMEM(0xffe03400),
+- IRQ(16),
+-};
+-DEFINE_DEV(pio, 3);
+-DEV_CLK(mck, pio3, pba, 13);
+-
+-static struct resource pio4_resource[] = {
+- PBMEM(0xffe03800),
+- IRQ(17),
+-};
+-DEFINE_DEV(pio, 4);
+-DEV_CLK(mck, pio4, pba, 14);
+-
+-void __init at32_add_system_devices(void)
+-{
+- platform_device_register(&at32_pm0_device);
+- platform_device_register(&at32_intc0_device);
+- platform_device_register(&at32ap700x_rtc0_device);
+- platform_device_register(&at32_wdt0_device);
+- platform_device_register(&at32_eic0_device);
+- platform_device_register(&smc0_device);
+- platform_device_register(&pdc_device);
+- platform_device_register(&dmaca0_device);
+-
+- platform_device_register(&at32_systc0_device);
+-
+- platform_device_register(&pio0_device);
+- platform_device_register(&pio1_device);
+- platform_device_register(&pio2_device);
+- platform_device_register(&pio3_device);
+- platform_device_register(&pio4_device);
+-}
+-
+-/* --------------------------------------------------------------------
+- * USART
+- * -------------------------------------------------------------------- */
+-
+-static struct atmel_uart_data atmel_usart0_data = {
+- .use_dma_tx = 1,
+- .use_dma_rx = 1,
+-};
+-static struct resource atmel_usart0_resource[] = {
+- PBMEM(0xffe00c00),
+- IRQ(6),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 0);
+-DEV_CLK(usart, atmel_usart0, pba, 3);
+-
+-static struct atmel_uart_data atmel_usart1_data = {
+- .use_dma_tx = 1,
+- .use_dma_rx = 1,
+-};
+-static struct resource atmel_usart1_resource[] = {
+- PBMEM(0xffe01000),
+- IRQ(7),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 1);
+-DEV_CLK(usart, atmel_usart1, pba, 4);
+-
+-static struct atmel_uart_data atmel_usart2_data = {
+- .use_dma_tx = 1,
+- .use_dma_rx = 1,
+-};
+-static struct resource atmel_usart2_resource[] = {
+- PBMEM(0xffe01400),
+- IRQ(8),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 2);
+-DEV_CLK(usart, atmel_usart2, pba, 5);
+-
+-static struct atmel_uart_data atmel_usart3_data = {
+- .use_dma_tx = 1,
+- .use_dma_rx = 1,
+-};
+-static struct resource atmel_usart3_resource[] = {
+- PBMEM(0xffe01800),
+- IRQ(9),
+-};
+-DEFINE_DEV_DATA(atmel_usart, 3);
+-DEV_CLK(usart, atmel_usart3, pba, 6);
+-
+-static inline void configure_usart0_pins(void)
+-{
+- select_peripheral(PA(8), PERIPH_B, 0); /* RXD */
+- select_peripheral(PA(9), PERIPH_B, 0); /* TXD */
+-}
+-
+-static inline void configure_usart1_pins(void)
+-{
+- select_peripheral(PA(17), PERIPH_A, 0); /* RXD */
+- select_peripheral(PA(18), PERIPH_A, 0); /* TXD */
+-}
+-
+-static inline void configure_usart2_pins(void)
+-{
+- select_peripheral(PB(26), PERIPH_B, 0); /* RXD */
+- select_peripheral(PB(27), PERIPH_B, 0); /* TXD */
+-}
+-
+-static inline void configure_usart3_pins(void)
+-{
+- select_peripheral(PB(18), PERIPH_B, 0); /* RXD */
+- select_peripheral(PB(17), PERIPH_B, 0); /* TXD */
+-}
+-
+-static struct platform_device *__initdata at32_usarts[4];
+-
+-void __init at32_map_usart(unsigned int hw_id, unsigned int line)
+-{
+- struct platform_device *pdev;
+-
+- switch (hw_id) {
+- case 0:
+- pdev = &atmel_usart0_device;
+- configure_usart0_pins();
+- break;
+- case 1:
+- pdev = &atmel_usart1_device;
+- configure_usart1_pins();
+- break;
+- case 2:
+- pdev = &atmel_usart2_device;
+- configure_usart2_pins();
+- break;
+- case 3:
+- pdev = &atmel_usart3_device;
+- configure_usart3_pins();
+- break;
+- default:
+- return;
+- }
+-
+- if (PXSEG(pdev->resource[0].start) == P4SEG) {
+- /* Addresses in the P4 segment are permanently mapped 1:1 */
+- struct atmel_uart_data *data = pdev->dev.platform_data;
+- data->regs = (void __iomem *)pdev->resource[0].start;
+- }
+-
+- pdev->id = line;
+- at32_usarts[line] = pdev;
+-}
+-
+-struct platform_device *__init at32_add_device_usart(unsigned int id)
+-{
+- platform_device_register(at32_usarts[id]);
+- return at32_usarts[id];
+-}
+-
+-struct platform_device *atmel_default_console_device;
+-
+-void __init at32_setup_serial_console(unsigned int usart_id)
+-{
+- atmel_default_console_device = at32_usarts[usart_id];
+-}
+-
+-/* --------------------------------------------------------------------
+- * Ethernet
+- * -------------------------------------------------------------------- */
+-
+-static struct eth_platform_data macb0_data;
+-static struct resource macb0_resource[] = {
+- PBMEM(0xfff01800),
+- IRQ(25),
+-};
+-DEFINE_DEV_DATA(macb, 0);
+-DEV_CLK(hclk, macb0, hsb, 8);
+-DEV_CLK(pclk, macb0, pbb, 6);
+-
+-static struct eth_platform_data macb1_data;
+-static struct resource macb1_resource[] = {
+- PBMEM(0xfff01c00),
+- IRQ(26),
+-};
+-DEFINE_DEV_DATA(macb, 1);
+-DEV_CLK(hclk, macb1, hsb, 9);
+-DEV_CLK(pclk, macb1, pbb, 7);
+-
+-struct platform_device *__init
+-at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
+-{
+- struct platform_device *pdev;
+-
+- switch (id) {
+- case 0:
+- pdev = &macb0_device;
+-
+- select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */
+- select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */
+- select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */
+- select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */
+- select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */
+- select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */
+- select_peripheral(PC(13), PERIPH_A, 0); /* RXER */
+- select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */
+- select_peripheral(PC(16), PERIPH_A, 0); /* MDC */
+- select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */
+-
+- if (!data->is_rmii) {
+- select_peripheral(PC(0), PERIPH_A, 0); /* COL */
+- select_peripheral(PC(1), PERIPH_A, 0); /* CRS */
+- select_peripheral(PC(2), PERIPH_A, 0); /* TXER */
+- select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */
+- select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */
+- select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */
+- select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */
+- select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */
+- select_peripheral(PC(18), PERIPH_A, 0); /* SPD */
+- }
+- break;
+-
+- case 1:
+- pdev = &macb1_device;
+-
+- select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */
+- select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */
+- select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */
+- select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */
+- select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */
+- select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */
+- select_peripheral(PD(5), PERIPH_B, 0); /* RXER */
+- select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */
+- select_peripheral(PD(3), PERIPH_B, 0); /* MDC */
+- select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */
+-
+- if (!data->is_rmii) {
+- select_peripheral(PC(19), PERIPH_B, 0); /* COL */
+- select_peripheral(PC(23), PERIPH_B, 0); /* CRS */
+- select_peripheral(PC(26), PERIPH_B, 0); /* TXER */
+- select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */
+- select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */
+- select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */
+- select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */
+- select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */
+- select_peripheral(PD(15), PERIPH_B, 0); /* SPD */
+- }
+- break;
+-
+- default:
+- return NULL;
+- }
+-
+- memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
+- platform_device_register(pdev);
+-
+- return pdev;
+-}
+-
+-/* --------------------------------------------------------------------
+- * SPI
+- * -------------------------------------------------------------------- */
+-static struct resource atmel_spi0_resource[] = {
+- PBMEM(0xffe00000),
+- IRQ(3),
+-};
+-DEFINE_DEV(atmel_spi, 0);
+-DEV_CLK(spi_clk, atmel_spi0, pba, 0);
+-
+-static struct resource atmel_spi1_resource[] = {
+- PBMEM(0xffe00400),
+- IRQ(4),
+-};
+-DEFINE_DEV(atmel_spi, 1);
+-DEV_CLK(spi_clk, atmel_spi1, pba, 1);
+-
+-static void __init
+-at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
+- unsigned int n, const u8 *pins)
+-{
+- unsigned int pin, mode;
+-
+- for (; n; n--, b++) {
+- b->bus_num = bus_num;
+- if (b->chip_select >= 4)
+- continue;
+- pin = (unsigned)b->controller_data;
+- if (!pin) {
+- pin = pins[b->chip_select];
+- b->controller_data = (void *)pin;
+- }
+- mode = AT32_GPIOF_OUTPUT;
+- if (!(b->mode & SPI_CS_HIGH))
+- mode |= AT32_GPIOF_HIGH;
+- at32_select_gpio(pin, mode);
+- }
+-}
+-
+-struct platform_device *__init
+-at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+-{
+- /*
+- * Manage the chipselects as GPIOs, normally using the same pins
+- * the SPI controller expects; but boards can use other pins.
+- */
+- static u8 __initdata spi0_pins[] =
+- { GPIO_PIN_PA(3), GPIO_PIN_PA(4),
+- GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
+- static u8 __initdata spi1_pins[] =
+- { GPIO_PIN_PB(2), GPIO_PIN_PB(3),
+- GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
+- struct platform_device *pdev;
+-
+- switch (id) {
+- case 0:
+- pdev = &atmel_spi0_device;
+- select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
+- select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
+- select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
+- at32_spi_setup_slaves(0, b, n, spi0_pins);
+- break;
+-
+- case 1:
+- pdev = &atmel_spi1_device;
+- select_peripheral(PB(0), PERIPH_B, 0); /* MISO */
+- select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
+- select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
+- at32_spi_setup_slaves(1, b, n, spi1_pins);
+- break;
+-
+- default:
+- return NULL;
+- }
+-
+- spi_register_board_info(b, n);
+- platform_device_register(pdev);
+- return pdev;
+-}
+-
+-/* --------------------------------------------------------------------
+- * TWI
+- * -------------------------------------------------------------------- */
+-static struct resource atmel_twi0_resource[] __initdata = {
+- PBMEM(0xffe00800),
+- IRQ(5),
+-};
+-static struct clk atmel_twi0_pclk = {
+- .name = "twi_pclk",
+- .parent = &pba_clk,
+- .mode = pba_clk_mode,
+- .get_rate = pba_clk_get_rate,
+- .index = 2,
+-};
+-
+-struct platform_device *__init at32_add_device_twi(unsigned int id)
+-{
+- struct platform_device *pdev;
+-
+- if (id != 0)
+- return NULL;
+-
+- pdev = platform_device_alloc("atmel_twi", id);
+- if (!pdev)
+- return NULL;
+-
+- if (platform_device_add_resources(pdev, atmel_twi0_resource,
+- ARRAY_SIZE(atmel_twi0_resource)))
+- goto err_add_resources;
+-
+- select_peripheral(PA(6), PERIPH_A, 0); /* SDA */
+- select_peripheral(PA(7), PERIPH_A, 0); /* SDL */
+-
+- atmel_twi0_pclk.dev = &pdev->dev;
+-
+- platform_device_add(pdev);
+- return pdev;
+-
+-err_add_resources:
+- platform_device_put(pdev);
+- return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * MMC
+- * -------------------------------------------------------------------- */
+-static struct resource atmel_mci0_resource[] __initdata = {
+- PBMEM(0xfff02400),
+- IRQ(28),
+-};
+-static struct clk atmel_mci0_pclk = {
+- .name = "mci_clk",
+- .parent = &pbb_clk,
+- .mode = pbb_clk_mode,
+- .get_rate = pbb_clk_get_rate,
+- .index = 9,
+-};
+-
+-struct platform_device *__init at32_add_device_mci(unsigned int id)
+-{
+- struct platform_device *pdev;
+-
+- if (id != 0)
+- return NULL;
+-
+- pdev = platform_device_alloc("atmel_mci", id);
+- if (!pdev)
+- return NULL;
+-
+- if (platform_device_add_resources(pdev, atmel_mci0_resource,
+- ARRAY_SIZE(atmel_mci0_resource)))
+- goto err_add_resources;
+-
+- select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
+- select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
+- select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
+- select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
+- select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
+- select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
+-
+- atmel_mci0_pclk.dev = &pdev->dev;
+-
+- platform_device_add(pdev);
+- return pdev;
+-
+-err_add_resources:
+- platform_device_put(pdev);
+- return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * LCDC
+- * -------------------------------------------------------------------- */
+-static struct atmel_lcdfb_info atmel_lcdfb0_data;
+-static struct resource atmel_lcdfb0_resource[] = {
+- {
+- .start = 0xff000000,
+- .end = 0xff000fff,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(1),
+- {
+- /* Placeholder for pre-allocated fb memory */
+- .start = 0x00000000,
+- .end = 0x00000000,
+- .flags = 0,
+- },
+-};
+-DEFINE_DEV_DATA(atmel_lcdfb, 0);
+-DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
+-static struct clk atmel_lcdfb0_pixclk = {
+- .name = "lcdc_clk",
+- .dev = &atmel_lcdfb0_device.dev,
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 7,
+-};
+-
+-struct platform_device *__init
+-at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+- unsigned long fbmem_start, unsigned long fbmem_len)
+-{
+- struct platform_device *pdev;
+- struct atmel_lcdfb_info *info;
+- struct fb_monspecs *monspecs;
+- struct fb_videomode *modedb;
+- unsigned int modedb_size;
+-
+- /*
+- * Do a deep copy of the fb data, monspecs and modedb. Make
+- * sure all allocations are done before setting up the
+- * portmux.
+- */
+- monspecs = kmemdup(data->default_monspecs,
+- sizeof(struct fb_monspecs), GFP_KERNEL);
+- if (!monspecs)
+- return NULL;
+-
+- modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
+- modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
+- if (!modedb)
+- goto err_dup_modedb;
+- monspecs->modedb = modedb;
+-
+- switch (id) {
+- case 0:
+- pdev = &atmel_lcdfb0_device;
+- select_peripheral(PC(19), PERIPH_A, 0); /* CC */
+- select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
+- select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
+- select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
+- select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
+- select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
+- select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
+- select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
+- select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
+- select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
+- select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
+- select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
+- select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
+- select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
+- select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
+- select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
+- select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
+- select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
+- select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
+- select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
+- select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
+- select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
+- select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
+- select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
+- select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
+- select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
+- select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
+- select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
+- select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
+- select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
+- select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
+-
+- clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
+- clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
+- break;
+-
+- default:
+- goto err_invalid_id;
+- }
+-
+- if (fbmem_len) {
+- pdev->resource[2].start = fbmem_start;
+- pdev->resource[2].end = fbmem_start + fbmem_len - 1;
+- pdev->resource[2].flags = IORESOURCE_MEM;
+- }
+-
+- info = pdev->dev.platform_data;
+- memcpy(info, data, sizeof(struct atmel_lcdfb_info));
+- info->default_monspecs = monspecs;
+-
+- platform_device_register(pdev);
+- return pdev;
+-
+-err_invalid_id:
+- kfree(modedb);
+-err_dup_modedb:
+- kfree(monspecs);
+- return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * SSC
+- * -------------------------------------------------------------------- */
+-static struct resource ssc0_resource[] = {
+- PBMEM(0xffe01c00),
+- IRQ(10),
+-};
+-DEFINE_DEV(ssc, 0);
+-DEV_CLK(pclk, ssc0, pba, 7);
+-
+-static struct resource ssc1_resource[] = {
+- PBMEM(0xffe02000),
+- IRQ(11),
+-};
+-DEFINE_DEV(ssc, 1);
+-DEV_CLK(pclk, ssc1, pba, 8);
+-
+-static struct resource ssc2_resource[] = {
+- PBMEM(0xffe02400),
+- IRQ(12),
+-};
+-DEFINE_DEV(ssc, 2);
+-DEV_CLK(pclk, ssc2, pba, 9);
+-
+-struct platform_device *__init
+-at32_add_device_ssc(unsigned int id, unsigned int flags)
+-{
+- struct platform_device *pdev;
+-
+- switch (id) {
+- case 0:
+- pdev = &ssc0_device;
+- if (flags & ATMEL_SSC_RF)
+- select_peripheral(PA(21), PERIPH_A, 0); /* RF */
+- if (flags & ATMEL_SSC_RK)
+- select_peripheral(PA(22), PERIPH_A, 0); /* RK */
+- if (flags & ATMEL_SSC_TK)
+- select_peripheral(PA(23), PERIPH_A, 0); /* TK */
+- if (flags & ATMEL_SSC_TF)
+- select_peripheral(PA(24), PERIPH_A, 0); /* TF */
+- if (flags & ATMEL_SSC_TD)
+- select_peripheral(PA(25), PERIPH_A, 0); /* TD */
+- if (flags & ATMEL_SSC_RD)
+- select_peripheral(PA(26), PERIPH_A, 0); /* RD */
+- break;
+- case 1:
+- pdev = &ssc1_device;
+- if (flags & ATMEL_SSC_RF)
+- select_peripheral(PA(0), PERIPH_B, 0); /* RF */
+- if (flags & ATMEL_SSC_RK)
+- select_peripheral(PA(1), PERIPH_B, 0); /* RK */
+- if (flags & ATMEL_SSC_TK)
+- select_peripheral(PA(2), PERIPH_B, 0); /* TK */
+- if (flags & ATMEL_SSC_TF)
+- select_peripheral(PA(3), PERIPH_B, 0); /* TF */
+- if (flags & ATMEL_SSC_TD)
+- select_peripheral(PA(4), PERIPH_B, 0); /* TD */
+- if (flags & ATMEL_SSC_RD)
+- select_peripheral(PA(5), PERIPH_B, 0); /* RD */
+- break;
+- case 2:
+- pdev = &ssc2_device;
+- if (flags & ATMEL_SSC_TD)
+- select_peripheral(PB(13), PERIPH_A, 0); /* TD */
+- if (flags & ATMEL_SSC_RD)
+- select_peripheral(PB(14), PERIPH_A, 0); /* RD */
+- if (flags & ATMEL_SSC_TK)
+- select_peripheral(PB(15), PERIPH_A, 0); /* TK */
+- if (flags & ATMEL_SSC_TF)
+- select_peripheral(PB(16), PERIPH_A, 0); /* TF */
+- if (flags & ATMEL_SSC_RF)
+- select_peripheral(PB(17), PERIPH_A, 0); /* RF */
+- if (flags & ATMEL_SSC_RK)
+- select_peripheral(PB(18), PERIPH_A, 0); /* RK */
+- break;
+- default:
+- return NULL;
+- }
+-
+- platform_device_register(pdev);
+- return pdev;
+-}
+-
+-/* --------------------------------------------------------------------
+- * USB Device Controller
+- * -------------------------------------------------------------------- */
+-static struct resource usba0_resource[] __initdata = {
+- {
+- .start = 0xff300000,
+- .end = 0xff3fffff,
+- .flags = IORESOURCE_MEM,
+- }, {
+- .start = 0xfff03000,
+- .end = 0xfff033ff,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(31),
+-};
+-static struct clk usba0_pclk = {
+- .name = "pclk",
+- .parent = &pbb_clk,
+- .mode = pbb_clk_mode,
+- .get_rate = pbb_clk_get_rate,
+- .index = 12,
+-};
+-static struct clk usba0_hclk = {
+- .name = "hclk",
+- .parent = &hsb_clk,
+- .mode = hsb_clk_mode,
+- .get_rate = hsb_clk_get_rate,
+- .index = 6,
+-};
+-
+-struct platform_device *__init
+-at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
+-{
+- struct platform_device *pdev;
+-
+- if (id != 0)
+- return NULL;
+-
+- pdev = platform_device_alloc("atmel_usba_udc", 0);
+- if (!pdev)
+- return NULL;
+-
+- if (platform_device_add_resources(pdev, usba0_resource,
+- ARRAY_SIZE(usba0_resource)))
+- goto out_free_pdev;
+-
+- if (data) {
+- if (platform_device_add_data(pdev, data, sizeof(*data)))
+- goto out_free_pdev;
+-
+- if (data->vbus_pin != GPIO_PIN_NONE)
+- at32_select_gpio(data->vbus_pin, 0);
+- }
+-
+- usba0_pclk.dev = &pdev->dev;
+- usba0_hclk.dev = &pdev->dev;
+-
+- platform_device_add(pdev);
+-
+- return pdev;
+-
+-out_free_pdev:
+- platform_device_put(pdev);
+- return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * IDE / CompactFlash
+- * -------------------------------------------------------------------- */
+-static struct resource at32_smc_cs4_resource[] __initdata = {
+- {
+- .start = 0x04000000,
+- .end = 0x07ffffff,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(~0UL), /* Magic IRQ will be overridden */
+-};
+-static struct resource at32_smc_cs5_resource[] __initdata = {
+- {
+- .start = 0x20000000,
+- .end = 0x23ffffff,
+- .flags = IORESOURCE_MEM,
+- },
+- IRQ(~0UL), /* Magic IRQ will be overridden */
+-};
+-
+-static int __init at32_init_ide_or_cf(struct platform_device *pdev,
+- unsigned int cs, unsigned int extint)
+-{
+- static unsigned int extint_pin_map[4] __initdata = {
+- GPIO_PIN_PB(25),
+- GPIO_PIN_PB(26),
+- GPIO_PIN_PB(27),
+- GPIO_PIN_PB(28),
+- };
+- static bool common_pins_initialized __initdata = false;
+- unsigned int extint_pin;
+- int ret;
+-
+- if (extint >= ARRAY_SIZE(extint_pin_map))
+- return -EINVAL;
+- extint_pin = extint_pin_map[extint];
+-
+- switch (cs) {
+- case 4:
+- ret = platform_device_add_resources(pdev,
+- at32_smc_cs4_resource,
+- ARRAY_SIZE(at32_smc_cs4_resource));
+- if (ret)
+- return ret;
+-
+- select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 -> OE_N */
+- set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
+- break;
+- case 5:
+- ret = platform_device_add_resources(pdev,
+- at32_smc_cs5_resource,
+- ARRAY_SIZE(at32_smc_cs5_resource));
+- if (ret)
+- return ret;
+-
+- select_peripheral(PE(22), PERIPH_A, 0); /* NCS5 -> OE_N */
+- set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
+- break;
+- default:
+- return -EINVAL;
+- }
+-
+- if (!common_pins_initialized) {
+- select_peripheral(PE(19), PERIPH_A, 0); /* CFCE1 -> CS0_N */
+- select_peripheral(PE(20), PERIPH_A, 0); /* CFCE2 -> CS1_N */
+- select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW -> DIR */
+- select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT <- IORDY */
+- common_pins_initialized = true;
+- }
+-
+- at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
+-
+- pdev->resource[1].start = EIM_IRQ_BASE + extint;
+- pdev->resource[1].end = pdev->resource[1].start;
+-
+- return 0;
+-}
+-
+-struct platform_device *__init
+-at32_add_device_ide(unsigned int id, unsigned int extint,
+- struct ide_platform_data *data)
+-{
+- struct platform_device *pdev;
+-
+- pdev = platform_device_alloc("at32_ide", id);
+- if (!pdev)
+- goto fail;
+-
+- if (platform_device_add_data(pdev, data,
+- sizeof(struct ide_platform_data)))
+- goto fail;
+-
+- if (at32_init_ide_or_cf(pdev, data->cs, extint))
+- goto fail;
+-
+- platform_device_add(pdev);
+- return pdev;
+-
+-fail:
+- platform_device_put(pdev);
+- return NULL;
+-}
+-
+-struct platform_device *__init
+-at32_add_device_cf(unsigned int id, unsigned int extint,
+- struct cf_platform_data *data)
+-{
+- struct platform_device *pdev;
+-
+- pdev = platform_device_alloc("at32_cf", id);
+- if (!pdev)
+- goto fail;
+-
+- if (platform_device_add_data(pdev, data,
+- sizeof(struct cf_platform_data)))
+- goto fail;
+-
+- if (at32_init_ide_or_cf(pdev, data->cs, extint))
+- goto fail;
+-
+- if (data->detect_pin != GPIO_PIN_NONE)
+- at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
+- if (data->reset_pin != GPIO_PIN_NONE)
+- at32_select_gpio(data->reset_pin, 0);
+- if (data->vcc_pin != GPIO_PIN_NONE)
+- at32_select_gpio(data->vcc_pin, 0);
+- /* READY is used as extint, so we can't select it as gpio */
+-
+- platform_device_add(pdev);
+- return pdev;
+-
+-fail:
+- platform_device_put(pdev);
+- return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * AC97C
+- * -------------------------------------------------------------------- */
+-static struct resource atmel_ac97c0_resource[] __initdata = {
+- PBMEM(0xfff02800),
+- IRQ(29),
+-};
+-static struct clk atmel_ac97c0_pclk = {
+- .name = "pclk",
+- .parent = &pbb_clk,
+- .mode = pbb_clk_mode,
+- .get_rate = pbb_clk_get_rate,
+- .index = 10,
+-};
+-
+-struct platform_device *__init at32_add_device_ac97c(unsigned int id)
+-{
+- struct platform_device *pdev;
+-
+- if (id != 0)
+- return NULL;
+-
+- pdev = platform_device_alloc("atmel_ac97c", id);
+- if (!pdev)
+- return NULL;
+-
+- if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
+- ARRAY_SIZE(atmel_ac97c0_resource)))
+- goto err_add_resources;
+-
+- select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
+- select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
+- select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
+- select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
+-
+- atmel_ac97c0_pclk.dev = &pdev->dev;
+-
+- platform_device_add(pdev);
+- return pdev;
+-
+-err_add_resources:
+- platform_device_put(pdev);
+- return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * ABDAC
+- * -------------------------------------------------------------------- */
+-static struct resource abdac0_resource[] __initdata = {
+- PBMEM(0xfff02000),
+- IRQ(27),
+-};
+-static struct clk abdac0_pclk = {
+- .name = "pclk",
+- .parent = &pbb_clk,
+- .mode = pbb_clk_mode,
+- .get_rate = pbb_clk_get_rate,
+- .index = 8,
+-};
+-static struct clk abdac0_sample_clk = {
+- .name = "sample_clk",
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 6,
+-};
+-
+-struct platform_device *__init at32_add_device_abdac(unsigned int id)
+-{
+- struct platform_device *pdev;
+-
+- if (id != 0)
+- return NULL;
+-
+- pdev = platform_device_alloc("abdac", id);
+- if (!pdev)
+- return NULL;
+-
+- if (platform_device_add_resources(pdev, abdac0_resource,
+- ARRAY_SIZE(abdac0_resource)))
+- goto err_add_resources;
+-
+- select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */
+- select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */
+- select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */
+- select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */
+-
+- abdac0_pclk.dev = &pdev->dev;
+- abdac0_sample_clk.dev = &pdev->dev;
+-
+- platform_device_add(pdev);
+- return pdev;
+-
+-err_add_resources:
+- platform_device_put(pdev);
+- return NULL;
+-}
+-
+-/* --------------------------------------------------------------------
+- * GCLK
+- * -------------------------------------------------------------------- */
+-static struct clk gclk0 = {
+- .name = "gclk0",
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 0,
+-};
+-static struct clk gclk1 = {
+- .name = "gclk1",
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 1,
+-};
+-static struct clk gclk2 = {
+- .name = "gclk2",
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 2,
+-};
+-static struct clk gclk3 = {
+- .name = "gclk3",
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 3,
+-};
+-static struct clk gclk4 = {
+- .name = "gclk4",
+- .mode = genclk_mode,
+- .get_rate = genclk_get_rate,
+- .set_rate = genclk_set_rate,
+- .set_parent = genclk_set_parent,
+- .index = 4,
+-};
+-
+-struct clk *at32_clock_list[] = {
+- &osc32k,
+- &osc0,
+- &osc1,
+- &pll0,
+- &pll1,
+- &cpu_clk,
+- &hsb_clk,
+- &pba_clk,
+- &pbb_clk,
+- &at32_pm_pclk,
+- &at32_intc0_pclk,
+- &hmatrix_clk,
+- &ebi_clk,
+- &hramc_clk,
+- &smc0_pclk,
+- &smc0_mck,
+- &pdc_hclk,
+- &pdc_pclk,
+- &dmaca0_hclk,
+- &pico_clk,
+- &pio0_mck,
+- &pio1_mck,
+- &pio2_mck,
+- &pio3_mck,
+- &pio4_mck,
+- &at32_systc0_pclk,
+- &atmel_usart0_usart,
+- &atmel_usart1_usart,
+- &atmel_usart2_usart,
+- &atmel_usart3_usart,
+- &macb0_hclk,
+- &macb0_pclk,
+- &macb1_hclk,
+- &macb1_pclk,
+- &atmel_spi0_spi_clk,
+- &atmel_spi1_spi_clk,
+- &atmel_twi0_pclk,
+- &atmel_mci0_pclk,
+- &atmel_lcdfb0_hck1,
+- &atmel_lcdfb0_pixclk,
+- &ssc0_pclk,
+- &ssc1_pclk,
+- &ssc2_pclk,
+- &usba0_hclk,
+- &usba0_pclk,
+- &atmel_ac97c0_pclk,
+- &abdac0_pclk,
+- &abdac0_sample_clk,
+- &gclk0,
+- &gclk1,
+- &gclk2,
+- &gclk3,
+- &gclk4,
+-};
+-unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
+-
+-void __init at32_portmux_init(void)
+-{
+- at32_init_pio(&pio0_device);
+- at32_init_pio(&pio1_device);
+- at32_init_pio(&pio2_device);
+- at32_init_pio(&pio3_device);
+- at32_init_pio(&pio4_device);
+-}
+-
+-void __init at32_clock_init(void)
+-{
+- u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
+- int i;
+-
+- if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
+- main_clock = &pll0;
+- cpu_clk.parent = &pll0;
+- } else {
+- main_clock = &osc0;
+- cpu_clk.parent = &osc0;
+- }
+-
+- if (pm_readl(PLL0) & PM_BIT(PLLOSC))
+- pll0.parent = &osc1;
+- if (pm_readl(PLL1) & PM_BIT(PLLOSC))
+- pll1.parent = &osc1;
+-
+- genclk_init_parent(&gclk0);
+- genclk_init_parent(&gclk1);
+- genclk_init_parent(&gclk2);
+- genclk_init_parent(&gclk3);
+- genclk_init_parent(&gclk4);
+- genclk_init_parent(&atmel_lcdfb0_pixclk);
+- genclk_init_parent(&abdac0_sample_clk);
+-
+- /*
+- * Turn on all clocks that have at least one user already, and
+- * turn off everything else. We only do this for module
+- * clocks, and even though it isn't particularly pretty to
+- * check the address of the mode function, it should do the
+- * trick...
+- */
+- for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
+- struct clk *clk = at32_clock_list[i];
+-
+- if (clk->users == 0)
+- continue;
+-
+- if (clk->mode == &cpu_clk_mode)
+- cpu_mask |= 1 << clk->index;
+- else if (clk->mode == &hsb_clk_mode)
+- hsb_mask |= 1 << clk->index;
+- else if (clk->mode == &pba_clk_mode)
+- pba_mask |= 1 << clk->index;
+- else if (clk->mode == &pbb_clk_mode)
+- pbb_mask |= 1 << clk->index;
+- }
+-
+- pm_writel(CPU_MASK, cpu_mask);
+- pm_writel(HSB_MASK, hsb_mask);
+- pm_writel(PBA_MASK, pba_mask);
+- pm_writel(PBB_MASK, pbb_mask);
+-}
+diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/at32ap700x.c linux-avr32/arch/avr32/mach-at32ap/at32ap700x.c
+--- linux-2.6.24/arch/avr32/mach-at32ap/at32ap700x.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/mach-at32ap/at32ap700x.c 2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,1809 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
++#include <linux/spi/spi.h>
++
++#include <asm/io.h>
++#include <asm/irq.h>
++
++#include <asm/arch/at32ap700x.h>
++#include <asm/arch/board.h>
++#include <asm/arch/portmux.h>
++
++#include <video/atmel_lcdc.h>
++
++#include "clock.h"
++#include "hmatrix.h"
++#include "pio.h"
++#include "pm.h"
++
++
++#define PBMEM(base) \
++ { \
++ .start = base, \
++ .end = base + 0x3ff, \
++ .flags = IORESOURCE_MEM, \
++ }
++#define IRQ(num) \
++ { \
++ .start = num, \
++ .end = num, \
++ .flags = IORESOURCE_IRQ, \
++ }
++#define NAMED_IRQ(num, _name) \
++ { \
++ .start = num, \
++ .end = num, \
++ .name = _name, \
++ .flags = IORESOURCE_IRQ, \
++ }
++
++/* REVISIT these assume *every* device supports DMA, but several
++ * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
++ */
++#define DEFINE_DEV(_name, _id) \
++static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
++static struct platform_device _name##_id##_device = { \
++ .name = #_name, \
++ .id = _id, \
++ .dev = { \
++ .dma_mask = &_name##_id##_dma_mask, \
++ .coherent_dma_mask = DMA_32BIT_MASK, \
++ }, \
++ .resource = _name##_id##_resource, \
++ .num_resources = ARRAY_SIZE(_name##_id##_resource), \
++}
++#define DEFINE_DEV_DATA(_name, _id) \
++static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
++static struct platform_device _name##_id##_device = { \
++ .name = #_name, \
++ .id = _id, \
++ .dev = { \
++ .dma_mask = &_name##_id##_dma_mask, \
++ .platform_data = &_name##_id##_data, \
++ .coherent_dma_mask = DMA_32BIT_MASK, \
++ }, \
++ .resource = _name##_id##_resource, \
++ .num_resources = ARRAY_SIZE(_name##_id##_resource), \
++}
++
++#define select_peripheral(pin, periph, flags) \
++ at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
++
++#define DEV_CLK(_name, devname, bus, _index) \
++static struct clk devname##_##_name = { \
++ .name = #_name, \
++ .dev = &devname##_device.dev, \
++ .parent = &bus##_clk, \
++ .mode = bus##_clk_mode, \
++ .get_rate = bus##_clk_get_rate, \
++ .index = _index, \
++}
++
++static DEFINE_SPINLOCK(pm_lock);
++
++unsigned long at32ap7000_osc_rates[3] = {
++ [0] = 32768,
++ /* FIXME: these are ATSTK1002-specific */
++ [1] = 20000000,
++ [2] = 12000000,
++};
++
++static unsigned long osc_get_rate(struct clk *clk)
++{
++ return at32ap7000_osc_rates[clk->index];
++}
++
++static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
++{
++ unsigned long div, mul, rate;
++
++ if (!(control & PM_BIT(PLLEN)))
++ return 0;
++
++ div = PM_BFEXT(PLLDIV, control) + 1;
++ mul = PM_BFEXT(PLLMUL, control) + 1;
++
++ rate = clk->parent->get_rate(clk->parent);
++ rate = (rate + div / 2) / div;
++ rate *= mul;
++
++ return rate;
++}
++
++static unsigned long pll0_get_rate(struct clk *clk)
++{
++ u32 control;
++
++ control = pm_readl(PLL0);
++
++ return pll_get_rate(clk, control);
++}
++
++static unsigned long pll1_get_rate(struct clk *clk)
++{
++ u32 control;
++
++ control = pm_readl(PLL1);
++
++ return pll_get_rate(clk, control);
++}
++
++/*
++ * The AT32AP7000 has five primary clock sources: One 32kHz
++ * oscillator, two crystal oscillators and two PLLs.
++ */
++static struct clk osc32k = {
++ .name = "osc32k",
++ .get_rate = osc_get_rate,
++ .users = 1,
++ .index = 0,
++};
++static struct clk osc0 = {
++ .name = "osc0",
++ .get_rate = osc_get_rate,
++ .users = 1,
++ .index = 1,
++};
++static struct clk osc1 = {
++ .name = "osc1",
++ .get_rate = osc_get_rate,
++ .index = 2,
++};
++static struct clk pll0 = {
++ .name = "pll0",
++ .get_rate = pll0_get_rate,
++ .parent = &osc0,
++};
++static struct clk pll1 = {
++ .name = "pll1",
++ .get_rate = pll1_get_rate,
++ .parent = &osc0,
++};
++
++/*
++ * The main clock can be either osc0 or pll0. The boot loader may
++ * have chosen one for us, so we don't really know which one until we
++ * have a look at the SM.
++ */
++static struct clk *main_clock;
++
++/*
++ * Synchronous clocks are generated from the main clock. The clocks
++ * must satisfy the constraint
++ * fCPU >= fHSB >= fPB
++ * i.e. each clock must not be faster than its parent.
++ */
++static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
++{
++ return main_clock->get_rate(main_clock) >> shift;
++};
++
++static void cpu_clk_mode(struct clk *clk, int enabled)
++{
++ unsigned long flags;
++ u32 mask;
++
++ spin_lock_irqsave(&pm_lock, flags);
++ mask = pm_readl(CPU_MASK);
++ if (enabled)
++ mask |= 1 << clk->index;
++ else
++ mask &= ~(1 << clk->index);
++ pm_writel(CPU_MASK, mask);
++ spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long cpu_clk_get_rate(struct clk *clk)
++{
++ unsigned long cksel, shift = 0;
++
++ cksel = pm_readl(CKSEL);
++ if (cksel & PM_BIT(CPUDIV))
++ shift = PM_BFEXT(CPUSEL, cksel) + 1;
++
++ return bus_clk_get_rate(clk, shift);
++}
++
++static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
++{
++ u32 control;
++ unsigned long parent_rate, child_div, actual_rate, div;
++
++ parent_rate = clk->parent->get_rate(clk->parent);
++ control = pm_readl(CKSEL);
++
++ if (control & PM_BIT(HSBDIV))
++ child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
++ else
++ child_div = 1;
++
++ if (rate > 3 * (parent_rate / 4) || child_div == 1) {
++ actual_rate = parent_rate;
++ control &= ~PM_BIT(CPUDIV);
++ } else {
++ unsigned int cpusel;
++ div = (parent_rate + rate / 2) / rate;
++ if (div > child_div)
++ div = child_div;
++ cpusel = (div > 1) ? (fls(div) - 2) : 0;
++ control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
++ actual_rate = parent_rate / (1 << (cpusel + 1));
++ }
++
++ pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
++ clk->name, rate, actual_rate);
++
++ if (apply)
++ pm_writel(CKSEL, control);
++
++ return actual_rate;
++}
++
++static void hsb_clk_mode(struct clk *clk, int enabled)
++{
++ unsigned long flags;
++ u32 mask;
++
++ spin_lock_irqsave(&pm_lock, flags);
++ mask = pm_readl(HSB_MASK);
++ if (enabled)
++ mask |= 1 << clk->index;
++ else
++ mask &= ~(1 << clk->index);
++ pm_writel(HSB_MASK, mask);
++ spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long hsb_clk_get_rate(struct clk *clk)
++{
++ unsigned long cksel, shift = 0;
++
++ cksel = pm_readl(CKSEL);
++ if (cksel & PM_BIT(HSBDIV))
++ shift = PM_BFEXT(HSBSEL, cksel) + 1;
++
++ return bus_clk_get_rate(clk, shift);
++}
++
++static void pba_clk_mode(struct clk *clk, int enabled)
++{
++ unsigned long flags;
++ u32 mask;
++
++ spin_lock_irqsave(&pm_lock, flags);
++ mask = pm_readl(PBA_MASK);
++ if (enabled)
++ mask |= 1 << clk->index;
++ else
++ mask &= ~(1 << clk->index);
++ pm_writel(PBA_MASK, mask);
++ spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long pba_clk_get_rate(struct clk *clk)
++{
++ unsigned long cksel, shift = 0;
++
++ cksel = pm_readl(CKSEL);
++ if (cksel & PM_BIT(PBADIV))
++ shift = PM_BFEXT(PBASEL, cksel) + 1;
++
++ return bus_clk_get_rate(clk, shift);
++}
++
++static void pbb_clk_mode(struct clk *clk, int enabled)
++{
++ unsigned long flags;
++ u32 mask;
++
++ spin_lock_irqsave(&pm_lock, flags);
++ mask = pm_readl(PBB_MASK);
++ if (enabled)
++ mask |= 1 << clk->index;
++ else
++ mask &= ~(1 << clk->index);
++ pm_writel(PBB_MASK, mask);
++ spin_unlock_irqrestore(&pm_lock, flags);
++}
++
++static unsigned long pbb_clk_get_rate(struct clk *clk)
++{
++ unsigned long cksel, shift = 0;
++
++ cksel = pm_readl(CKSEL);
++ if (cksel & PM_BIT(PBBDIV))
++ shift = PM_BFEXT(PBBSEL, cksel) + 1;
++
++ return bus_clk_get_rate(clk, shift);
++}
++
++static struct clk cpu_clk = {
++ .name = "cpu",
++ .get_rate = cpu_clk_get_rate,
++ .set_rate = cpu_clk_set_rate,
++ .users = 1,
++};
++static struct clk hsb_clk = {
++ .name = "hsb",
++ .parent = &cpu_clk,
++ .get_rate = hsb_clk_get_rate,
++};
++static struct clk pba_clk = {
++ .name = "pba",
++ .parent = &hsb_clk,
++ .mode = hsb_clk_mode,
++ .get_rate = pba_clk_get_rate,
++ .index = 1,
++};
++static struct clk pbb_clk = {
++ .name = "pbb",
++ .parent = &hsb_clk,
++ .mode = hsb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .users = 1,
++ .index = 2,
++};
++
++/* --------------------------------------------------------------------
++ * Generic Clock operations
++ * -------------------------------------------------------------------- */
++
++static void genclk_mode(struct clk *clk, int enabled)
++{
++ u32 control;
++
++ control = pm_readl(GCCTRL(clk->index));
++ if (enabled)
++ control |= PM_BIT(CEN);
++ else
++ control &= ~PM_BIT(CEN);
++ pm_writel(GCCTRL(clk->index), control);
++}
++
++static unsigned long genclk_get_rate(struct clk *clk)
++{
++ u32 control;
++ unsigned long div = 1;
++
++ control = pm_readl(GCCTRL(clk->index));
++ if (control & PM_BIT(DIVEN))
++ div = 2 * (PM_BFEXT(DIV, control) + 1);
++
++ return clk->parent->get_rate(clk->parent) / div;
++}
++
++static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
++{
++ u32 control;
++ unsigned long parent_rate, actual_rate, div;
++
++ parent_rate = clk->parent->get_rate(clk->parent);
++ control = pm_readl(GCCTRL(clk->index));
++
++ if (rate > 3 * parent_rate / 4) {
++ actual_rate = parent_rate;
++ control &= ~PM_BIT(DIVEN);
++ } else {
++ div = (parent_rate + rate) / (2 * rate) - 1;
++ control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
++ actual_rate = parent_rate / (2 * (div + 1));
++ }
++
++ dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
++ clk->name, rate, actual_rate);
++
++ if (apply)
++ pm_writel(GCCTRL(clk->index), control);
++
++ return actual_rate;
++}
++
++int genclk_set_parent(struct clk *clk, struct clk *parent)
++{
++ u32 control;
++
++ dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
++ clk->name, parent->name, clk->parent->name);
++
++ control = pm_readl(GCCTRL(clk->index));
++
++ if (parent == &osc1 || parent == &pll1)
++ control |= PM_BIT(OSCSEL);
++ else if (parent == &osc0 || parent == &pll0)
++ control &= ~PM_BIT(OSCSEL);
++ else
++ return -EINVAL;
++
++ if (parent == &pll0 || parent == &pll1)
++ control |= PM_BIT(PLLSEL);
++ else
++ control &= ~PM_BIT(PLLSEL);
++
++ pm_writel(GCCTRL(clk->index), control);
++ clk->parent = parent;
++
++ return 0;
++}
++
++static void __init genclk_init_parent(struct clk *clk)
++{
++ u32 control;
++ struct clk *parent;
++
++ BUG_ON(clk->index > 7);
++
++ control = pm_readl(GCCTRL(clk->index));
++ if (control & PM_BIT(OSCSEL))
++ parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
++ else
++ parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
++
++ clk->parent = parent;
++}
++
++/* --------------------------------------------------------------------
++ * System peripherals
++ * -------------------------------------------------------------------- */
++static struct resource at32_pm0_resource[] = {
++ {
++ .start = 0xfff00000,
++ .end = 0xfff0007f,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(20),
++};
++
++static struct resource at32ap700x_rtc0_resource[] = {
++ {
++ .start = 0xfff00080,
++ .end = 0xfff000af,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(21),
++};
++
++static struct resource at32_wdt0_resource[] = {
++ {
++ .start = 0xfff000b0,
++ .end = 0xfff000cf,
++ .flags = IORESOURCE_MEM,
++ },
++};
++
++static struct resource at32_eic0_resource[] = {
++ {
++ .start = 0xfff00100,
++ .end = 0xfff0013f,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(19),
++};
++
++DEFINE_DEV(at32_pm, 0);
++DEFINE_DEV(at32ap700x_rtc, 0);
++DEFINE_DEV(at32_wdt, 0);
++DEFINE_DEV(at32_eic, 0);
++
++/*
++ * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
++ * is always running.
++ */
++static struct clk at32_pm_pclk = {
++ .name = "pclk",
++ .dev = &at32_pm0_device.dev,
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .users = 1,
++ .index = 0,
++};
++
++static struct resource intc0_resource[] = {
++ PBMEM(0xfff00400),
++};
++struct platform_device at32_intc0_device = {
++ .name = "intc",
++ .id = 0,
++ .resource = intc0_resource,
++ .num_resources = ARRAY_SIZE(intc0_resource),
++};
++DEV_CLK(pclk, at32_intc0, pbb, 1);
++
++static struct clk ebi_clk = {
++ .name = "ebi",
++ .parent = &hsb_clk,
++ .mode = hsb_clk_mode,
++ .get_rate = hsb_clk_get_rate,
++ .users = 1,
++};
++static struct clk hramc_clk = {
++ .name = "hramc",
++ .parent = &hsb_clk,
++ .mode = hsb_clk_mode,
++ .get_rate = hsb_clk_get_rate,
++ .users = 1,
++ .index = 3,
++};
++
++static struct resource smc0_resource[] = {
++ PBMEM(0xfff03400),
++};
++DEFINE_DEV(smc, 0);
++DEV_CLK(pclk, smc0, pbb, 13);
++DEV_CLK(mck, smc0, hsb, 0);
++
++static struct platform_device pdc_device = {
++ .name = "pdc",
++ .id = 0,
++};
++DEV_CLK(hclk, pdc, hsb, 4);
++DEV_CLK(pclk, pdc, pba, 16);
++
++static struct clk pico_clk = {
++ .name = "pico",
++ .parent = &cpu_clk,
++ .mode = cpu_clk_mode,
++ .get_rate = cpu_clk_get_rate,
++ .users = 1,
++};
++
++static struct resource dmaca0_resource[] = {
++ {
++ .start = 0xff200000,
++ .end = 0xff20ffff,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(2),
++};
++DEFINE_DEV(dmaca, 0);
++DEV_CLK(hclk, dmaca0, hsb, 10);
++
++/* --------------------------------------------------------------------
++ * HMATRIX
++ * -------------------------------------------------------------------- */
++
++static struct clk hmatrix_clk = {
++ .name = "hmatrix_clk",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 2,
++ .users = 1,
++};
++#define HMATRIX_BASE ((void __iomem *)0xfff00800)
++
++#define hmatrix_readl(reg) \
++ __raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
++#define hmatrix_writel(reg,value) \
++ __raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
++
++/*
++ * Set bits in the HMATRIX Special Function Register (SFR) used by the
++ * External Bus Interface (EBI). This can be used to enable special
++ * features like CompactFlash support, NAND Flash support, etc. on
++ * certain chipselects.
++ */
++static inline void set_ebi_sfr_bits(u32 mask)
++{
++ u32 sfr;
++
++ clk_enable(&hmatrix_clk);
++ sfr = hmatrix_readl(SFR4);
++ sfr |= mask;
++ hmatrix_writel(SFR4, sfr);
++ clk_disable(&hmatrix_clk);
++}
++
++/* --------------------------------------------------------------------
++ * System Timer/Counter (TC)
++ * -------------------------------------------------------------------- */
++static struct resource at32_systc0_resource[] = {
++ PBMEM(0xfff00c00),
++ IRQ(22),
++};
++struct platform_device at32_systc0_device = {
++ .name = "systc",
++ .id = 0,
++ .resource = at32_systc0_resource,
++ .num_resources = ARRAY_SIZE(at32_systc0_resource),
++};
++DEV_CLK(pclk, at32_systc0, pbb, 3);
++
++/* --------------------------------------------------------------------
++ * PIO
++ * -------------------------------------------------------------------- */
++
++static struct resource pio0_resource[] = {
++ PBMEM(0xffe02800),
++ IRQ(13),
++};
++DEFINE_DEV(pio, 0);
++DEV_CLK(mck, pio0, pba, 10);
++
++static struct resource pio1_resource[] = {
++ PBMEM(0xffe02c00),
++ IRQ(14),
++};
++DEFINE_DEV(pio, 1);
++DEV_CLK(mck, pio1, pba, 11);
++
++static struct resource pio2_resource[] = {
++ PBMEM(0xffe03000),
++ IRQ(15),
++};
++DEFINE_DEV(pio, 2);
++DEV_CLK(mck, pio2, pba, 12);
++
++static struct resource pio3_resource[] = {
++ PBMEM(0xffe03400),
++ IRQ(16),
++};
++DEFINE_DEV(pio, 3);
++DEV_CLK(mck, pio3, pba, 13);
++
++static struct resource pio4_resource[] = {
++ PBMEM(0xffe03800),
++ IRQ(17),
++};
++DEFINE_DEV(pio, 4);
++DEV_CLK(mck, pio4, pba, 14);
++
++void __init at32_add_system_devices(void)
++{
++ platform_device_register(&at32_pm0_device);
++ platform_device_register(&at32_intc0_device);
++ platform_device_register(&at32ap700x_rtc0_device);
++ platform_device_register(&at32_wdt0_device);
++ platform_device_register(&at32_eic0_device);
++ platform_device_register(&smc0_device);
++ platform_device_register(&pdc_device);
++ platform_device_register(&dmaca0_device);
++
++ platform_device_register(&at32_systc0_device);
++
++ platform_device_register(&pio0_device);
++ platform_device_register(&pio1_device);
++ platform_device_register(&pio2_device);
++ platform_device_register(&pio3_device);
++ platform_device_register(&pio4_device);
++}
++
++/* --------------------------------------------------------------------
++ * USART
++ * -------------------------------------------------------------------- */
++
++static struct atmel_uart_data atmel_usart0_data = {
++ .use_dma_tx = 1,
++ .use_dma_rx = 1,
++};
++static struct resource atmel_usart0_resource[] = {
++ PBMEM(0xffe00c00),
++ IRQ(6),
++};
++DEFINE_DEV_DATA(atmel_usart, 0);
++DEV_CLK(usart, atmel_usart0, pba, 3);
++
++static struct atmel_uart_data atmel_usart1_data = {
++ .use_dma_tx = 1,
++ .use_dma_rx = 1,
++};
++static struct resource atmel_usart1_resource[] = {
++ PBMEM(0xffe01000),
++ IRQ(7),
++};
++DEFINE_DEV_DATA(atmel_usart, 1);
++DEV_CLK(usart, atmel_usart1, pba, 4);
++
++static struct atmel_uart_data atmel_usart2_data = {
++ .use_dma_tx = 1,
++ .use_dma_rx = 1,
++};
++static struct resource atmel_usart2_resource[] = {
++ PBMEM(0xffe01400),
++ IRQ(8),
++};
++DEFINE_DEV_DATA(atmel_usart, 2);
++DEV_CLK(usart, atmel_usart2, pba, 5);
++
++static struct atmel_uart_data atmel_usart3_data = {
++ .use_dma_tx = 1,
++ .use_dma_rx = 1,
++};
++static struct resource atmel_usart3_resource[] = {
++ PBMEM(0xffe01800),
++ IRQ(9),
++};
++DEFINE_DEV_DATA(atmel_usart, 3);
++DEV_CLK(usart, atmel_usart3, pba, 6);
++
++static inline void configure_usart0_pins(void)
++{
++ select_peripheral(PA(8), PERIPH_B, 0); /* RXD */
++ select_peripheral(PA(9), PERIPH_B, 0); /* TXD */
++}
++
++static inline void configure_usart1_pins(void)
++{
++ select_peripheral(PA(17), PERIPH_A, 0); /* RXD */
++ select_peripheral(PA(18), PERIPH_A, 0); /* TXD */
++}
++
++static inline void configure_usart2_pins(void)
++{
++ select_peripheral(PB(26), PERIPH_B, 0); /* RXD */
++ select_peripheral(PB(27), PERIPH_B, 0); /* TXD */
++}
++
++static inline void configure_usart3_pins(void)
++{
++ select_peripheral(PB(18), PERIPH_B, 0); /* RXD */
++ select_peripheral(PB(17), PERIPH_B, 0); /* TXD */
++}
++
++static struct platform_device *__initdata at32_usarts[4];
++
++void __init at32_map_usart(unsigned int hw_id, unsigned int line)
++{
++ struct platform_device *pdev;
++
++ switch (hw_id) {
++ case 0:
++ pdev = &atmel_usart0_device;
++ configure_usart0_pins();
++ break;
++ case 1:
++ pdev = &atmel_usart1_device;
++ configure_usart1_pins();
++ break;
++ case 2:
++ pdev = &atmel_usart2_device;
++ configure_usart2_pins();
++ break;
++ case 3:
++ pdev = &atmel_usart3_device;
++ configure_usart3_pins();
++ break;
++ default:
++ return;
++ }
++
++ if (PXSEG(pdev->resource[0].start) == P4SEG) {
++ /* Addresses in the P4 segment are permanently mapped 1:1 */
++ struct atmel_uart_data *data = pdev->dev.platform_data;
++ data->regs = (void __iomem *)pdev->resource[0].start;
++ }
++
++ pdev->id = line;
++ at32_usarts[line] = pdev;
++}
++
++struct platform_device *__init at32_add_device_usart(unsigned int id)
++{
++ platform_device_register(at32_usarts[id]);
++ return at32_usarts[id];
++}
++
++struct platform_device *atmel_default_console_device;
++
++void __init at32_setup_serial_console(unsigned int usart_id)
++{
++ atmel_default_console_device = at32_usarts[usart_id];
++}
++
++/* --------------------------------------------------------------------
++ * Ethernet
++ * -------------------------------------------------------------------- */
++
++#ifdef CONFIG_CPU_AT32AP7000
++static struct eth_platform_data macb0_data;
++static struct resource macb0_resource[] = {
++ PBMEM(0xfff01800),
++ IRQ(25),
++};
++DEFINE_DEV_DATA(macb, 0);
++DEV_CLK(hclk, macb0, hsb, 8);
++DEV_CLK(pclk, macb0, pbb, 6);
++
++static struct eth_platform_data macb1_data;
++static struct resource macb1_resource[] = {
++ PBMEM(0xfff01c00),
++ IRQ(26),
++};
++DEFINE_DEV_DATA(macb, 1);
++DEV_CLK(hclk, macb1, hsb, 9);
++DEV_CLK(pclk, macb1, pbb, 7);
++
++struct platform_device *__init
++at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0:
++ pdev = &macb0_device;
++
++ select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */
++ select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */
++ select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */
++ select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */
++ select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */
++ select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */
++ select_peripheral(PC(13), PERIPH_A, 0); /* RXER */
++ select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */
++ select_peripheral(PC(16), PERIPH_A, 0); /* MDC */
++ select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */
++
++ if (!data->is_rmii) {
++ select_peripheral(PC(0), PERIPH_A, 0); /* COL */
++ select_peripheral(PC(1), PERIPH_A, 0); /* CRS */
++ select_peripheral(PC(2), PERIPH_A, 0); /* TXER */
++ select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */
++ select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */
++ select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */
++ select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */
++ select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */
++ select_peripheral(PC(18), PERIPH_A, 0); /* SPD */
++ }
++ break;
++
++ case 1:
++ pdev = &macb1_device;
++
++ select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */
++ select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */
++ select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */
++ select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */
++ select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */
++ select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */
++ select_peripheral(PD(5), PERIPH_B, 0); /* RXER */
++ select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */
++ select_peripheral(PD(3), PERIPH_B, 0); /* MDC */
++ select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */
++
++ if (!data->is_rmii) {
++ select_peripheral(PC(19), PERIPH_B, 0); /* COL */
++ select_peripheral(PC(23), PERIPH_B, 0); /* CRS */
++ select_peripheral(PC(26), PERIPH_B, 0); /* TXER */
++ select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */
++ select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */
++ select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */
++ select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */
++ select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */
++ select_peripheral(PD(15), PERIPH_B, 0); /* SPD */
++ }
++ break;
++
++ default:
++ return NULL;
++ }
++
++ memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
++ platform_device_register(pdev);
++
++ return pdev;
++}
++#endif
++
++/* --------------------------------------------------------------------
++ * SPI
++ * -------------------------------------------------------------------- */
++static struct resource atmel_spi0_resource[] = {
++ PBMEM(0xffe00000),
++ IRQ(3),
++};
++DEFINE_DEV(atmel_spi, 0);
++DEV_CLK(spi_clk, atmel_spi0, pba, 0);
++
++static struct resource atmel_spi1_resource[] = {
++ PBMEM(0xffe00400),
++ IRQ(4),
++};
++DEFINE_DEV(atmel_spi, 1);
++DEV_CLK(spi_clk, atmel_spi1, pba, 1);
++
++static void __init
++at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
++ unsigned int n, const u8 *pins)
++{
++ unsigned int pin, mode;
++
++ for (; n; n--, b++) {
++ b->bus_num = bus_num;
++ if (b->chip_select >= 4)
++ continue;
++ pin = (unsigned)b->controller_data;
++ if (!pin) {
++ pin = pins[b->chip_select];
++ b->controller_data = (void *)pin;
++ }
++ mode = AT32_GPIOF_OUTPUT;
++ if (!(b->mode & SPI_CS_HIGH))
++ mode |= AT32_GPIOF_HIGH;
++ at32_select_gpio(pin, mode);
++ }
++}
++
++struct platform_device *__init
++at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
++{
++ /*
++ * Manage the chipselects as GPIOs, normally using the same pins
++ * the SPI controller expects; but boards can use other pins.
++ */
++ static u8 __initdata spi0_pins[] =
++ { GPIO_PIN_PA(3), GPIO_PIN_PA(4),
++ GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
++ static u8 __initdata spi1_pins[] =
++ { GPIO_PIN_PB(2), GPIO_PIN_PB(3),
++ GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0:
++ pdev = &atmel_spi0_device;
++ select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
++ select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
++ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
++ at32_spi_setup_slaves(0, b, n, spi0_pins);
++ break;
++
++ case 1:
++ pdev = &atmel_spi1_device;
++ select_peripheral(PB(0), PERIPH_B, 0); /* MISO */
++ select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
++ select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
++ at32_spi_setup_slaves(1, b, n, spi1_pins);
++ break;
++
++ default:
++ return NULL;
++ }
++
++ spi_register_board_info(b, n);
++ platform_device_register(pdev);
++ return pdev;
++}
++
++/* --------------------------------------------------------------------
++ * TWI
++ * -------------------------------------------------------------------- */
++static struct resource atmel_twi0_resource[] __initdata = {
++ PBMEM(0xffe00800),
++ IRQ(5),
++};
++static struct clk atmel_twi0_pclk = {
++ .name = "twi_pclk",
++ .parent = &pba_clk,
++ .mode = pba_clk_mode,
++ .get_rate = pba_clk_get_rate,
++ .index = 2,
++};
++
++struct platform_device *__init at32_add_device_twi(unsigned int id)
++{
++ struct platform_device *pdev;
++
++ if (id != 0)
++ return NULL;
++
++ pdev = platform_device_alloc("atmel_twi", id);
++ if (!pdev)
++ return NULL;
++
++ if (platform_device_add_resources(pdev, atmel_twi0_resource,
++ ARRAY_SIZE(atmel_twi0_resource)))
++ goto err_add_resources;
++
++ select_peripheral(PA(6), PERIPH_A, 0); /* SDA */
++ select_peripheral(PA(7), PERIPH_A, 0); /* SDL */
++
++ atmel_twi0_pclk.dev = &pdev->dev;
++
++ platform_device_add(pdev);
++ return pdev;
++
++err_add_resources:
++ platform_device_put(pdev);
++ return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * MMC
++ * -------------------------------------------------------------------- */
++static struct resource atmel_mci0_resource[] __initdata = {
++ PBMEM(0xfff02400),
++ IRQ(28),
++};
++static struct clk atmel_mci0_pclk = {
++ .name = "mci_clk",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 9,
++};
++
++struct platform_device *__init
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
++{
++ struct platform_device *pdev;
++
++ if (id != 0)
++ return NULL;
++
++ pdev = platform_device_alloc("atmel_mci", id);
++ if (!pdev)
++ goto fail;
++
++ if (platform_device_add_resources(pdev, atmel_mci0_resource,
++ ARRAY_SIZE(atmel_mci0_resource)))
++ goto fail;
++
++ if (data && platform_device_add_data(pdev, data,
++ sizeof(struct mci_platform_data)))
++ goto fail;
++
++ select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
++ select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
++ select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
++ select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
++ select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
++ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
++
++ if (data) {
++ if (data->detect_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->detect_pin, 0);
++ if (data->wp_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->wp_pin, 0);
++ }
++
++ atmel_mci0_pclk.dev = &pdev->dev;
++
++ platform_device_add(pdev);
++ return pdev;
++
++fail:
++ platform_device_put(pdev);
++ return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * LCDC
++ * -------------------------------------------------------------------- */
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
++static struct atmel_lcdfb_info atmel_lcdfb0_data;
++static struct resource atmel_lcdfb0_resource[] = {
++ {
++ .start = 0xff000000,
++ .end = 0xff000fff,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(1),
++ {
++ /* Placeholder for pre-allocated fb memory */
++ .start = 0x00000000,
++ .end = 0x00000000,
++ .flags = 0,
++ },
++};
++DEFINE_DEV_DATA(atmel_lcdfb, 0);
++DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
++static struct clk atmel_lcdfb0_pixclk = {
++ .name = "lcdc_clk",
++ .dev = &atmel_lcdfb0_device.dev,
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 7,
++};
++
++struct platform_device *__init
++at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
++ unsigned long fbmem_start, unsigned long fbmem_len)
++{
++ struct platform_device *pdev;
++ struct atmel_lcdfb_info *info;
++ struct fb_monspecs *monspecs;
++ struct fb_videomode *modedb;
++ unsigned int modedb_size;
++
++ /*
++ * Do a deep copy of the fb data, monspecs and modedb. Make
++ * sure all allocations are done before setting up the
++ * portmux.
++ */
++ monspecs = kmemdup(data->default_monspecs,
++ sizeof(struct fb_monspecs), GFP_KERNEL);
++ if (!monspecs)
++ return NULL;
++
++ modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
++ modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
++ if (!modedb)
++ goto err_dup_modedb;
++ monspecs->modedb = modedb;
++
++ switch (id) {
++ case 0:
++ pdev = &atmel_lcdfb0_device;
++ select_peripheral(PC(19), PERIPH_A, 0); /* CC */
++ select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
++ select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
++ select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
++ select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
++ select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
++ select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
++ select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
++ select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
++ select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
++ select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
++ select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
++ select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
++ select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
++ select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
++ select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
++ select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
++ select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
++ select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
++ select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
++ select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
++ select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
++ select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
++ select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
++ select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
++ select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
++ select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
++ select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
++ select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
++ select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
++ select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
++
++ clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
++ clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
++ break;
++
++ default:
++ goto err_invalid_id;
++ }
++
++ if (fbmem_len) {
++ pdev->resource[2].start = fbmem_start;
++ pdev->resource[2].end = fbmem_start + fbmem_len - 1;
++ pdev->resource[2].flags = IORESOURCE_MEM;
++ }
++
++ info = pdev->dev.platform_data;
++ memcpy(info, data, sizeof(struct atmel_lcdfb_info));
++ info->default_monspecs = monspecs;
++
++ platform_device_register(pdev);
++ return pdev;
++
++err_invalid_id:
++ kfree(modedb);
++err_dup_modedb:
++ kfree(monspecs);
++ return NULL;
++}
++#endif
++
++/* --------------------------------------------------------------------
++ * PWM
++ * -------------------------------------------------------------------- */
++static struct resource atmel_pwm0_resource[] __initdata = {
++ PBMEM(0xfff01400),
++ IRQ(24),
++};
++static struct clk atmel_pwm0_mck = {
++ .name = "mck",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 5,
++};
++
++struct platform_device *__init at32_add_device_pwm(u32 mask)
++{
++ struct platform_device *pdev;
++
++ if (!mask)
++ return NULL;
++
++ pdev = platform_device_alloc("atmel_pwm", 0);
++ if (!pdev)
++ return NULL;
++
++ if (platform_device_add_resources(pdev, atmel_pwm0_resource,
++ ARRAY_SIZE(atmel_pwm0_resource)))
++ goto out_free_pdev;
++
++ if (platform_device_add_data(pdev, &mask, sizeof(mask)))
++ goto out_free_pdev;
++
++ if (mask & (1 << 0))
++ select_peripheral(PA(28), PERIPH_A, 0);
++ if (mask & (1 << 1))
++ select_peripheral(PA(29), PERIPH_A, 0);
++ if (mask & (1 << 2))
++ select_peripheral(PA(21), PERIPH_B, 0);
++ if (mask & (1 << 3))
++ select_peripheral(PA(22), PERIPH_B, 0);
++
++ atmel_pwm0_mck.dev = &pdev->dev;
++
++ platform_device_add(pdev);
++
++ return pdev;
++
++out_free_pdev:
++ platform_device_put(pdev);
++ return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * SSC
++ * -------------------------------------------------------------------- */
++static struct resource ssc0_resource[] = {
++ PBMEM(0xffe01c00),
++ IRQ(10),
++};
++DEFINE_DEV(ssc, 0);
++DEV_CLK(pclk, ssc0, pba, 7);
++
++static struct resource ssc1_resource[] = {
++ PBMEM(0xffe02000),
++ IRQ(11),
++};
++DEFINE_DEV(ssc, 1);
++DEV_CLK(pclk, ssc1, pba, 8);
++
++static struct resource ssc2_resource[] = {
++ PBMEM(0xffe02400),
++ IRQ(12),
++};
++DEFINE_DEV(ssc, 2);
++DEV_CLK(pclk, ssc2, pba, 9);
++
++struct platform_device *__init
++at32_add_device_ssc(unsigned int id, unsigned int flags)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0:
++ pdev = &ssc0_device;
++ if (flags & ATMEL_SSC_RF)
++ select_peripheral(PA(21), PERIPH_A, 0); /* RF */
++ if (flags & ATMEL_SSC_RK)
++ select_peripheral(PA(22), PERIPH_A, 0); /* RK */
++ if (flags & ATMEL_SSC_TK)
++ select_peripheral(PA(23), PERIPH_A, 0); /* TK */
++ if (flags & ATMEL_SSC_TF)
++ select_peripheral(PA(24), PERIPH_A, 0); /* TF */
++ if (flags & ATMEL_SSC_TD)
++ select_peripheral(PA(25), PERIPH_A, 0); /* TD */
++ if (flags & ATMEL_SSC_RD)
++ select_peripheral(PA(26), PERIPH_A, 0); /* RD */
++ break;
++ case 1:
++ pdev = &ssc1_device;
++ if (flags & ATMEL_SSC_RF)
++ select_peripheral(PA(0), PERIPH_B, 0); /* RF */
++ if (flags & ATMEL_SSC_RK)
++ select_peripheral(PA(1), PERIPH_B, 0); /* RK */
++ if (flags & ATMEL_SSC_TK)
++ select_peripheral(PA(2), PERIPH_B, 0); /* TK */
++ if (flags & ATMEL_SSC_TF)
++ select_peripheral(PA(3), PERIPH_B, 0); /* TF */
++ if (flags & ATMEL_SSC_TD)
++ select_peripheral(PA(4), PERIPH_B, 0); /* TD */
++ if (flags & ATMEL_SSC_RD)
++ select_peripheral(PA(5), PERIPH_B, 0); /* RD */
++ break;
++ case 2:
++ pdev = &ssc2_device;
++ if (flags & ATMEL_SSC_TD)
++ select_peripheral(PB(13), PERIPH_A, 0); /* TD */
++ if (flags & ATMEL_SSC_RD)
++ select_peripheral(PB(14), PERIPH_A, 0); /* RD */
++ if (flags & ATMEL_SSC_TK)
++ select_peripheral(PB(15), PERIPH_A, 0); /* TK */
++ if (flags & ATMEL_SSC_TF)
++ select_peripheral(PB(16), PERIPH_A, 0); /* TF */
++ if (flags & ATMEL_SSC_RF)
++ select_peripheral(PB(17), PERIPH_A, 0); /* RF */
++ if (flags & ATMEL_SSC_RK)
++ select_peripheral(PB(18), PERIPH_A, 0); /* RK */
++ break;
++ default:
++ return NULL;
++ }
++
++ platform_device_register(pdev);
++ return pdev;
++}
++
++/* --------------------------------------------------------------------
++ * USB Device Controller
++ * -------------------------------------------------------------------- */
++static struct resource usba0_resource[] __initdata = {
++ {
++ .start = 0xff300000,
++ .end = 0xff3fffff,
++ .flags = IORESOURCE_MEM,
++ }, {
++ .start = 0xfff03000,
++ .end = 0xfff033ff,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(31),
++};
++static struct clk usba0_pclk = {
++ .name = "pclk",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 12,
++};
++static struct clk usba0_hclk = {
++ .name = "hclk",
++ .parent = &hsb_clk,
++ .mode = hsb_clk_mode,
++ .get_rate = hsb_clk_get_rate,
++ .index = 6,
++};
++
++struct platform_device *__init
++at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
++{
++ struct platform_device *pdev;
++
++ if (id != 0)
++ return NULL;
++
++ pdev = platform_device_alloc("atmel_usba_udc", 0);
++ if (!pdev)
++ return NULL;
++
++ if (platform_device_add_resources(pdev, usba0_resource,
++ ARRAY_SIZE(usba0_resource)))
++ goto out_free_pdev;
++
++ if (data) {
++ if (platform_device_add_data(pdev, data, sizeof(*data)))
++ goto out_free_pdev;
++
++ if (data->vbus_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->vbus_pin, 0);
++ }
++
++ usba0_pclk.dev = &pdev->dev;
++ usba0_hclk.dev = &pdev->dev;
++
++ platform_device_add(pdev);
++
++ return pdev;
++
++out_free_pdev:
++ platform_device_put(pdev);
++ return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * IDE / CompactFlash
++ * -------------------------------------------------------------------- */
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7001)
++static struct resource at32_smc_cs4_resource[] __initdata = {
++ {
++ .start = 0x04000000,
++ .end = 0x07ffffff,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(~0UL), /* Magic IRQ will be overridden */
++};
++static struct resource at32_smc_cs5_resource[] __initdata = {
++ {
++ .start = 0x20000000,
++ .end = 0x23ffffff,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(~0UL), /* Magic IRQ will be overridden */
++};
++
++static int __init at32_init_ide_or_cf(struct platform_device *pdev,
++ unsigned int cs, unsigned int extint)
++{
++ static unsigned int extint_pin_map[4] __initdata = {
++ GPIO_PIN_PB(25),
++ GPIO_PIN_PB(26),
++ GPIO_PIN_PB(27),
++ GPIO_PIN_PB(28),
++ };
++ static bool common_pins_initialized __initdata = false;
++ unsigned int extint_pin;
++ int ret;
++
++ if (extint >= ARRAY_SIZE(extint_pin_map))
++ return -EINVAL;
++ extint_pin = extint_pin_map[extint];
++
++ switch (cs) {
++ case 4:
++ ret = platform_device_add_resources(pdev,
++ at32_smc_cs4_resource,
++ ARRAY_SIZE(at32_smc_cs4_resource));
++ if (ret)
++ return ret;
++
++ select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 -> OE_N */
++ set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
++ break;
++ case 5:
++ ret = platform_device_add_resources(pdev,
++ at32_smc_cs5_resource,
++ ARRAY_SIZE(at32_smc_cs5_resource));
++ if (ret)
++ return ret;
++
++ select_peripheral(PE(22), PERIPH_A, 0); /* NCS5 -> OE_N */
++ set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ if (!common_pins_initialized) {
++ select_peripheral(PE(19), PERIPH_A, 0); /* CFCE1 -> CS0_N */
++ select_peripheral(PE(20), PERIPH_A, 0); /* CFCE2 -> CS1_N */
++ select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW -> DIR */
++ select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT <- IORDY */
++ common_pins_initialized = true;
++ }
++
++ at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
++
++ pdev->resource[1].start = EIM_IRQ_BASE + extint;
++ pdev->resource[1].end = pdev->resource[1].start;
++
++ return 0;
++}
++
++struct platform_device *__init
++at32_add_device_ide(unsigned int id, unsigned int extint,
++ struct ide_platform_data *data)
++{
++ struct platform_device *pdev;
++
++ pdev = platform_device_alloc("at32_ide", id);
++ if (!pdev)
++ goto fail;
++
++ if (platform_device_add_data(pdev, data,
++ sizeof(struct ide_platform_data)))
++ goto fail;
++
++ if (at32_init_ide_or_cf(pdev, data->cs, extint))
++ goto fail;
++
++ platform_device_add(pdev);
++ return pdev;
++
++fail:
++ platform_device_put(pdev);
++ return NULL;
++}
++
++struct platform_device *__init
++at32_add_device_cf(unsigned int id, unsigned int extint,
++ struct cf_platform_data *data)
++{
++ struct platform_device *pdev;
++
++ pdev = platform_device_alloc("at32_cf", id);
++ if (!pdev)
++ goto fail;
++
++ if (platform_device_add_data(pdev, data,
++ sizeof(struct cf_platform_data)))
++ goto fail;
++
++ if (at32_init_ide_or_cf(pdev, data->cs, extint))
++ goto fail;
++
++ if (data->detect_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
++ if (data->reset_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->reset_pin, 0);
++ if (data->vcc_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->vcc_pin, 0);
++ /* READY is used as extint, so we can't select it as gpio */
++
++ platform_device_add(pdev);
++ return pdev;
++
++fail:
++ platform_device_put(pdev);
++ return NULL;
++}
++#endif
++
++/* --------------------------------------------------------------------
++ * AC97C
++ * -------------------------------------------------------------------- */
++static struct resource atmel_ac97c0_resource[] __initdata = {
++ PBMEM(0xfff02800),
++ IRQ(29),
++};
++static struct clk atmel_ac97c0_pclk = {
++ .name = "pclk",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 10,
++};
++
++struct platform_device *__init at32_add_device_ac97c(unsigned int id)
++{
++ struct platform_device *pdev;
++
++ if (id != 0)
++ return NULL;
++
++ pdev = platform_device_alloc("atmel_ac97c", id);
++ if (!pdev)
++ return NULL;
++
++ if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
++ ARRAY_SIZE(atmel_ac97c0_resource)))
++ goto err_add_resources;
++
++ select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
++ select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
++ select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
++ select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
++
++ atmel_ac97c0_pclk.dev = &pdev->dev;
++
++ platform_device_add(pdev);
++ return pdev;
++
++err_add_resources:
++ platform_device_put(pdev);
++ return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * ABDAC
++ * -------------------------------------------------------------------- */
++static struct resource abdac0_resource[] __initdata = {
++ PBMEM(0xfff02000),
++ IRQ(27),
++};
++static struct clk abdac0_pclk = {
++ .name = "pclk",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 8,
++};
++static struct clk abdac0_sample_clk = {
++ .name = "sample_clk",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 6,
++};
++
++struct platform_device *__init at32_add_device_abdac(unsigned int id)
++{
++ struct platform_device *pdev;
++
++ if (id != 0)
++ return NULL;
++
++ pdev = platform_device_alloc("abdac", id);
++ if (!pdev)
++ return NULL;
++
++ if (platform_device_add_resources(pdev, abdac0_resource,
++ ARRAY_SIZE(abdac0_resource)))
++ goto err_add_resources;
++
++ select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */
++ select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */
++ select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */
++ select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */
++
++ abdac0_pclk.dev = &pdev->dev;
++ abdac0_sample_clk.dev = &pdev->dev;
++
++ platform_device_add(pdev);
++ return pdev;
++
++err_add_resources:
++ platform_device_put(pdev);
++ return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * GCLK
++ * -------------------------------------------------------------------- */
++static struct clk gclk0 = {
++ .name = "gclk0",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 0,
++};
++static struct clk gclk1 = {
++ .name = "gclk1",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 1,
++};
++static struct clk gclk2 = {
++ .name = "gclk2",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 2,
++};
++static struct clk gclk3 = {
++ .name = "gclk3",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 3,
++};
++static struct clk gclk4 = {
++ .name = "gclk4",
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 4,
++};
++
++struct clk *at32_clock_list[] = {
++ &osc32k,
++ &osc0,
++ &osc1,
++ &pll0,
++ &pll1,
++ &cpu_clk,
++ &hsb_clk,
++ &pba_clk,
++ &pbb_clk,
++ &at32_pm_pclk,
++ &at32_intc0_pclk,
++ &hmatrix_clk,
++ &ebi_clk,
++ &hramc_clk,
++ &smc0_pclk,
++ &smc0_mck,
++ &pdc_hclk,
++ &pdc_pclk,
++ &dmaca0_hclk,
++ &pico_clk,
++ &pio0_mck,
++ &pio1_mck,
++ &pio2_mck,
++ &pio3_mck,
++ &pio4_mck,
++ &at32_systc0_pclk,
++ &atmel_usart0_usart,
++ &atmel_usart1_usart,
++ &atmel_usart2_usart,
++ &atmel_usart3_usart,
++ &atmel_pwm0_mck,
++#if defined(CONFIG_CPU_AT32AP7000)
++ &macb0_hclk,
++ &macb0_pclk,
++ &macb1_hclk,
++ &macb1_pclk,
++#endif
++ &atmel_spi0_spi_clk,
++ &atmel_spi1_spi_clk,
++ &atmel_twi0_pclk,
++ &atmel_mci0_pclk,
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
++ &atmel_lcdfb0_hck1,
++ &atmel_lcdfb0_pixclk,
++#endif
++ &ssc0_pclk,
++ &ssc1_pclk,
++ &ssc2_pclk,
++ &usba0_hclk,
++ &usba0_pclk,
++ &atmel_ac97c0_pclk,
++ &abdac0_pclk,
++ &abdac0_sample_clk,
++ &gclk0,
++ &gclk1,
++ &gclk2,
++ &gclk3,
++ &gclk4,
++};
++unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
++
++void __init at32_portmux_init(void)
++{
++ at32_init_pio(&pio0_device);
++ at32_init_pio(&pio1_device);
++ at32_init_pio(&pio2_device);
++ at32_init_pio(&pio3_device);
++ at32_init_pio(&pio4_device);
++}
++
++void __init at32_clock_init(void)
++{
++ u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
++ int i;
++
++ if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
++ main_clock = &pll0;
++ cpu_clk.parent = &pll0;
++ } else {
++ main_clock = &osc0;
++ cpu_clk.parent = &osc0;
++ }
++
++ if (pm_readl(PLL0) & PM_BIT(PLLOSC))
++ pll0.parent = &osc1;
++ if (pm_readl(PLL1) & PM_BIT(PLLOSC))
++ pll1.parent = &osc1;
++
++ genclk_init_parent(&gclk0);
++ genclk_init_parent(&gclk1);
++ genclk_init_parent(&gclk2);
++ genclk_init_parent(&gclk3);
++ genclk_init_parent(&gclk4);
++#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
++ genclk_init_parent(&atmel_lcdfb0_pixclk);
++#endif
++ genclk_init_parent(&abdac0_sample_clk);
++
++ /*
++ * Turn on all clocks that have at least one user already, and
++ * turn off everything else. We only do this for module
++ * clocks, and even though it isn't particularly pretty to
++ * check the address of the mode function, it should do the
++ * trick...
++ */
++ for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
++ struct clk *clk = at32_clock_list[i];
++
++ if (clk->users == 0)
++ continue;
++
++ if (clk->mode == &cpu_clk_mode)
++ cpu_mask |= 1 << clk->index;
++ else if (clk->mode == &hsb_clk_mode)
++ hsb_mask |= 1 << clk->index;
++ else if (clk->mode == &pba_clk_mode)
++ pba_mask |= 1 << clk->index;
++ else if (clk->mode == &pbb_clk_mode)
++ pbb_mask |= 1 << clk->index;
++ }
++
++ pm_writel(CPU_MASK, cpu_mask);
++ pm_writel(HSB_MASK, hsb_mask);
++ pm_writel(PBA_MASK, pba_mask);
++ pm_writel(PBB_MASK, pbb_mask);
++}
+diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/extint.c linux-avr32/arch/avr32/mach-at32ap/extint.c
+--- linux-2.6.24/arch/avr32/mach-at32ap/extint.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/mach-at32ap/extint.c 2008-02-01 14:51:35.000000000 -0500
+@@ -26,16 +26,10 @@
+ #define EIC_MODE 0x0014
+ #define EIC_EDGE 0x0018
+ #define EIC_LEVEL 0x001c
+-#define EIC_TEST 0x0020
+ #define EIC_NMIC 0x0024
+
+-/* Bitfields in TEST */
+-#define EIC_TESTEN_OFFSET 31
+-#define EIC_TESTEN_SIZE 1
+-
+ /* Bitfields in NMIC */
+-#define EIC_EN_OFFSET 0
+-#define EIC_EN_SIZE 1
++#define EIC_NMIC_ENABLE (1 << 0)
+
+ /* Bit manipulation macros */
+ #define EIC_BIT(name) \
+@@ -63,6 +57,9 @@ struct eic {
+ unsigned int first_irq;
+ };
+
++static struct eic *nmi_eic;
++static bool nmi_enabled;
++
+ static void eic_ack_irq(unsigned int irq)
+ {
+ struct eic *eic = get_irq_chip_data(irq);
+@@ -133,8 +130,11 @@ static int eic_set_irq_type(unsigned int
+ eic_writel(eic, EDGE, edge);
+ eic_writel(eic, LEVEL, level);
+
+- if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
++ if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
+ flow_type |= IRQ_LEVEL;
++ __set_irq_handler_unlocked(irq, handle_level_irq);
++ } else
++ __set_irq_handler_unlocked(irq, handle_edge_irq);
+ desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+ desc->status |= flow_type;
+ }
+@@ -154,9 +154,8 @@ static struct irq_chip eic_chip = {
+ static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
+ {
+ struct eic *eic = desc->handler_data;
+- struct irq_desc *ext_desc;
+ unsigned long status, pending;
+- unsigned int i, ext_irq;
++ unsigned int i;
+
+ status = eic_readl(eic, ISR);
+ pending = status & eic_readl(eic, IMR);
+@@ -165,15 +164,28 @@ static void demux_eic_irq(unsigned int i
+ i = fls(pending) - 1;
+ pending &= ~(1 << i);
+
+- ext_irq = i + eic->first_irq;
+- ext_desc = irq_desc + ext_irq;
+- if (ext_desc->status & IRQ_LEVEL)
+- handle_level_irq(ext_irq, ext_desc);
+- else
+- handle_edge_irq(ext_irq, ext_desc);
++ generic_handle_irq(i + eic->first_irq);
+ }
+ }
+
++int nmi_enable(void)
++{
++ nmi_enabled = true;
++
++ if (nmi_eic)
++ eic_writel(nmi_eic, NMIC, EIC_NMIC_ENABLE);
++
++ return 0;
++}
++
++void nmi_disable(void)
++{
++ if (nmi_eic)
++ eic_writel(nmi_eic, NMIC, 0);
++
++ nmi_enabled = false;
++}
++
+ static int __init eic_probe(struct platform_device *pdev)
+ {
+ struct eic *eic;
+@@ -214,14 +226,13 @@ static int __init eic_probe(struct platf
+ pattern = eic_readl(eic, MODE);
+ nr_irqs = fls(pattern);
+
+- /* Trigger on falling edge unless overridden by driver */
+- eic_writel(eic, MODE, 0UL);
++ /* Trigger on low level unless overridden by driver */
+ eic_writel(eic, EDGE, 0UL);
++ eic_writel(eic, LEVEL, 0UL);
+
+ eic->chip = &eic_chip;
+
+ for (i = 0; i < nr_irqs; i++) {
+- /* NOTE the handler we set here is ignored by the demux */
+ set_irq_chip_and_handler(eic->first_irq + i, &eic_chip,
+ handle_level_irq);
+ set_irq_chip_data(eic->first_irq + i, eic);
+@@ -230,6 +241,16 @@ static int __init eic_probe(struct platf
+ set_irq_chained_handler(int_irq, demux_eic_irq);
+ set_irq_data(int_irq, eic);
+
++ if (pdev->id == 0) {
++ nmi_eic = eic;
++ if (nmi_enabled)
++ /*
++ * Someone tried to enable NMI before we were
++ * ready. Do it now.
++ */
++ nmi_enable();
++ }
++
+ dev_info(&pdev->dev,
+ "External Interrupt Controller at 0x%p, IRQ %u\n",
+ eic->regs, int_irq);
+diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/gpio-dev.c linux-avr32/arch/avr32/mach-at32ap/gpio-dev.c
+--- linux-2.6.24/arch/avr32/mach-at32ap/gpio-dev.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/mach-at32ap/gpio-dev.c 2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,573 @@
++/*
++ * GPIO /dev and configfs interface
++ *
++ * Copyright (C) 2006-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/kernel.h>
++#include <linux/configfs.h>
++#include <linux/cdev.h>
++#include <linux/device.h>
++#include <linux/fs.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/poll.h>
++#include <linux/uaccess.h>
++#include <linux/wait.h>
++
++#include <asm/gpio.h>
++#include <asm/arch/portmux.h>
++
++#define GPIO_DEV_MAX 8
++
++static struct class *gpio_dev_class;
++static dev_t gpio_devt;
++
++struct gpio_item {
++ spinlock_t lock;
++
++ int enabled;
++ int initialized;
++ int port;
++ u32 pin_mask;
++ u32 oe_mask;
++
++ /* Pin state last time we read it (for blocking reads) */
++ u32 pin_state;
++ int changed;
++
++ wait_queue_head_t change_wq;
++ struct fasync_struct *async_queue;
++
++ int id;
++ struct class_device *gpio_dev;
++ struct cdev char_dev;
++ struct config_item item;
++};
++
++struct gpio_attribute {
++ struct configfs_attribute attr;
++ ssize_t (*show)(struct gpio_item *, char *);
++ ssize_t (*store)(struct gpio_item *, const char *, size_t);
++};
++
++static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
++{
++ struct gpio_item *gpio = dev_id;
++ u32 old_state, new_state;
++
++ old_state = gpio->pin_state;
++ new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
++ gpio->pin_state = new_state;
++
++ if (new_state != old_state) {
++ gpio->changed = 1;
++ wake_up_interruptible(&gpio->change_wq);
++
++ if (gpio->async_queue)
++ kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
++ }
++
++ return IRQ_HANDLED;
++}
++
++static int gpio_dev_open(struct inode *inode, struct file *file)
++{
++ struct gpio_item *gpio = container_of(inode->i_cdev,
++ struct gpio_item,
++ char_dev);
++ unsigned int irq;
++ unsigned int i;
++ int ret;
++
++ nonseekable_open(inode, file);
++ config_item_get(&gpio->item);
++ file->private_data = gpio;
++
++ gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
++ gpio->pin_mask);
++ gpio->changed = 1;
++
++ for (i = 0; i < 32; i++) {
++ if (gpio->pin_mask & (1 << i)) {
++ irq = gpio_to_irq(32 * gpio->port + i);
++ ret = request_irq(irq, gpio_dev_interrupt, 0,
++ "gpio-dev", gpio);
++ if (ret)
++ goto err_irq;
++ }
++ }
++
++ return 0;
++
++err_irq:
++ while (i--) {
++ if (gpio->pin_mask & (1 << i)) {
++ irq = gpio_to_irq(32 * gpio->port + i);
++ free_irq(irq, gpio);
++ }
++ }
++
++ config_item_put(&gpio->item);
++
++ return ret;
++}
++
++static int gpio_dev_fasync(int fd, struct file *file, int mode)
++{
++ struct gpio_item *gpio = file->private_data;
++
++ return fasync_helper(fd, file, mode, &gpio->async_queue);
++}
++
++static int gpio_dev_release(struct inode *inode, struct file *file)
++{
++ struct gpio_item *gpio = file->private_data;
++ unsigned int irq;
++ unsigned int i;
++
++ gpio_dev_fasync(-1, file, 0);
++
++ for (i = 0; i < 32; i++) {
++ if (gpio->pin_mask & (1 << i)) {
++ irq = gpio_to_irq(32 * gpio->port + i);
++ free_irq(irq, gpio);
++ }
++ }
++
++ config_item_put(&gpio->item);
++
++ return 0;
++}
++
++static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
++{
++ struct gpio_item *gpio = file->private_data;
++ unsigned int mask = 0;
++
++ poll_wait(file, &gpio->change_wq, wait);
++ if (gpio->changed)
++ mask |= POLLIN | POLLRDNORM;
++
++ return mask;
++}
++
++static ssize_t gpio_dev_read(struct file *file, char __user *buf,
++ size_t count, loff_t *offset)
++{
++ struct gpio_item *gpio = file->private_data;
++ u32 value;
++
++ spin_lock_irq(&gpio->lock);
++ while (!gpio->changed) {
++ spin_unlock_irq(&gpio->lock);
++
++ if (file->f_flags & O_NONBLOCK)
++ return -EAGAIN;
++
++ if (wait_event_interruptible(gpio->change_wq, gpio->changed))
++ return -ERESTARTSYS;
++
++ spin_lock_irq(&gpio->lock);
++ }
++
++ gpio->changed = 0;
++ value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
++
++ spin_unlock_irq(&gpio->lock);
++
++ count = min(count, (size_t)4);
++ if (copy_to_user(buf, &value, count))
++ return -EFAULT;
++
++ return count;
++}
++
++static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
++ size_t count, loff_t *offset)
++{
++ struct gpio_item *gpio = file->private_data;
++ u32 value = 0;
++ u32 mask = ~0UL;
++
++ count = min(count, (size_t)4);
++ if (copy_from_user(&value, buf, count))
++ return -EFAULT;
++
++ /* Assuming big endian */
++ mask <<= (4 - count) * 8;
++ mask &= gpio->pin_mask;
++
++ at32_gpio_set_value_multiple(gpio->port, value, mask);
++
++ return count;
++}
++
++static struct file_operations gpio_dev_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .open = gpio_dev_open,
++ .release = gpio_dev_release,
++ .fasync = gpio_dev_fasync,
++ .poll = gpio_dev_poll,
++ .read = gpio_dev_read,
++ .write = gpio_dev_write,
++};
++
++static struct gpio_item *to_gpio_item(struct config_item *item)
++{
++ return item ? container_of(item, struct gpio_item, item) : NULL;
++}
++
++static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "%d\n", gpio->port);
++}
++
++static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ unsigned long id;
++ char *p = (char *)page;
++ ssize_t ret = -EINVAL;
++
++ id = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
++
++ /* Switching PIO is not allowed when live... */
++ spin_lock(&gpio->lock);
++ if (!gpio->enabled) {
++ ret = -ENXIO;
++ if (at32_gpio_port_is_valid(id)) {
++ gpio->port = id;
++ ret = count;
++ }
++ }
++ spin_unlock(&gpio->lock);
++
++ return ret;
++}
++
++static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "0x%08x\n", gpio->pin_mask);
++}
++
++static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ u32 new_mask;
++ char *p = (char *)page;
++ ssize_t ret = -EINVAL;
++
++ new_mask = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
++
++ /* Can't update the pin mask while live. */
++ spin_lock(&gpio->lock);
++ if (!gpio->enabled) {
++ gpio->oe_mask &= new_mask;
++ gpio->pin_mask = new_mask;
++ ret = count;
++ }
++ spin_unlock(&gpio->lock);
++
++ return ret;
++}
++
++static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "0x%08x\n", gpio->oe_mask);
++}
++
++static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ u32 mask;
++ char *p = (char *)page;
++ ssize_t ret = -EINVAL;
++
++ mask = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
++
++ spin_lock(&gpio->lock);
++ if (!gpio->enabled) {
++ gpio->oe_mask = mask & gpio->pin_mask;
++ ret = count;
++ }
++ spin_unlock(&gpio->lock);
++
++ return ret;
++}
++
++static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "%d\n", gpio->enabled);
++}
++
++static ssize_t gpio_store_enabled(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ char *p = (char *)page;
++ int enabled;
++ int ret;
++
++ enabled = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
++
++ /* make it a boolean value */
++ enabled = !!enabled;
++
++ if (gpio->enabled == enabled)
++ /* No change; do nothing. */
++ return count;
++
++ BUG_ON(gpio->id >= GPIO_DEV_MAX);
++
++ if (!enabled) {
++ class_device_unregister(gpio->gpio_dev);
++ cdev_del(&gpio->char_dev);
++ at32_deselect_pins(gpio->port, gpio->pin_mask);
++ gpio->initialized = 0;
++ } else {
++ if (gpio->port < 0 || !gpio->pin_mask)
++ return -ENODEV;
++ }
++
++ /* Disallow any updates to gpio_id or pin_mask */
++ spin_lock(&gpio->lock);
++ gpio->enabled = enabled;
++ spin_unlock(&gpio->lock);
++
++ if (!enabled)
++ return count;
++
++ /* Now, try to allocate the pins */
++ ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
++ if (ret)
++ goto err_alloc_pins;
++
++ gpio->initialized = 1;
++
++ cdev_init(&gpio->char_dev, &gpio_dev_fops);
++ gpio->char_dev.owner = THIS_MODULE;
++ ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
++ if (ret < 0)
++ goto err_cdev_add;
++ gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
++ MKDEV(MAJOR(gpio_devt), gpio->id),
++ NULL,
++ "gpio%d", gpio->id);
++ if (IS_ERR(gpio->gpio_dev)) {
++ printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
++ ret = PTR_ERR(gpio->gpio_dev);
++ goto err_class_dev;
++ }
++
++ printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
++ gpio->id, gpio->port, gpio->pin_mask,
++ MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
++
++ return 0;
++
++err_class_dev:
++ cdev_del(&gpio->char_dev);
++err_cdev_add:
++ at32_deselect_pins(gpio->port, gpio->pin_mask);
++ gpio->initialized = 0;
++err_alloc_pins:
++ spin_lock(&gpio->lock);
++ gpio->enabled = 0;
++ spin_unlock(&gpio->lock);
++
++ return ret;
++}
++
++static struct gpio_attribute gpio_item_attr_gpio_id = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "gpio_id",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_gpio_id,
++ .store = gpio_store_gpio_id,
++};
++static struct gpio_attribute gpio_item_attr_pin_mask = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "pin_mask",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_pin_mask,
++ .store = gpio_store_pin_mask,
++};
++static struct gpio_attribute gpio_item_attr_oe_mask = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "oe_mask",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_oe_mask,
++ .store = gpio_store_oe_mask,
++};
++static struct gpio_attribute gpio_item_attr_enabled = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "enabled",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_enabled,
++ .store = gpio_store_enabled,
++};
++
++static struct configfs_attribute *gpio_item_attrs[] = {
++ &gpio_item_attr_gpio_id.attr,
++ &gpio_item_attr_pin_mask.attr,
++ &gpio_item_attr_oe_mask.attr,
++ &gpio_item_attr_enabled.attr,
++ NULL,
++};
++
++static ssize_t gpio_show_attr(struct config_item *item,
++ struct configfs_attribute *attr,
++ char *page)
++{
++ struct gpio_item *gpio_item = to_gpio_item(item);
++ struct gpio_attribute *gpio_attr
++ = container_of(attr, struct gpio_attribute, attr);
++ ssize_t ret = 0;
++
++ if (gpio_attr->show)
++ ret = gpio_attr->show(gpio_item, page);
++ return ret;
++}
++
++static ssize_t gpio_store_attr(struct config_item *item,
++ struct configfs_attribute *attr,
++ const char *page, size_t count)
++{
++ struct gpio_item *gpio_item = to_gpio_item(item);
++ struct gpio_attribute *gpio_attr
++ = container_of(attr, struct gpio_attribute, attr);
++ ssize_t ret = -EINVAL;
++
++ if (gpio_attr->store)
++ ret = gpio_attr->store(gpio_item, page, count);
++ return ret;
++}
++
++static void gpio_release(struct config_item *item)
++{
++ kfree(to_gpio_item(item));
++}
++
++static struct configfs_item_operations gpio_item_ops = {
++ .release = gpio_release,
++ .show_attribute = gpio_show_attr,
++ .store_attribute = gpio_store_attr,
++};
++
++static struct config_item_type gpio_item_type = {
++ .ct_item_ops = &gpio_item_ops,
++ .ct_attrs = gpio_item_attrs,
++ .ct_owner = THIS_MODULE,
++};
++
++static struct config_item *gpio_make_item(struct config_group *group,
++ const char *name)
++{
++ static int next_id;
++ struct gpio_item *gpio;
++
++ if (next_id >= GPIO_DEV_MAX)
++ return NULL;
++
++ gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
++ if (!gpio)
++ return NULL;
++
++ gpio->id = next_id++;
++ config_item_init_type_name(&gpio->item, name, &gpio_item_type);
++ spin_lock_init(&gpio->lock);
++ init_waitqueue_head(&gpio->change_wq);
++
++ return &gpio->item;
++}
++
++static void gpio_drop_item(struct config_group *group,
++ struct config_item *item)
++{
++ struct gpio_item *gpio = to_gpio_item(item);
++
++ spin_lock(&gpio->lock);
++ if (gpio->enabled) {
++ class_device_unregister(gpio->gpio_dev);
++ cdev_del(&gpio->char_dev);
++ }
++
++ if (gpio->initialized) {
++ at32_deselect_pins(gpio->port, gpio->pin_mask);
++ gpio->initialized = 0;
++ gpio->enabled = 0;
++ }
++ spin_unlock(&gpio->lock);
++}
++
++static struct configfs_group_operations gpio_group_ops = {
++ .make_item = gpio_make_item,
++ .drop_item = gpio_drop_item,
++};
++
++static struct config_item_type gpio_group_type = {
++ .ct_group_ops = &gpio_group_ops,
++ .ct_owner = THIS_MODULE,
++};
++
++static struct configfs_subsystem gpio_subsys = {
++ .su_group = {
++ .cg_item = {
++ .ci_namebuf = "gpio",
++ .ci_type = &gpio_group_type,
++ },
++ },
++};
++
++static int __init gpio_dev_init(void)
++{
++ int err;
++
++ gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
++ if (IS_ERR(gpio_dev_class)) {
++ err = PTR_ERR(gpio_dev_class);
++ goto err_class_create;
++ }
++
++ err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
++ if (err < 0)
++ goto err_alloc_chrdev;
++
++ /* Configfs initialization */
++ config_group_init(&gpio_subsys.su_group);
++ mutex_init(&gpio_subsys.su_mutex);
++ err = configfs_register_subsystem(&gpio_subsys);
++ if (err)
++ goto err_register_subsys;
++
++ return 0;
++
++err_register_subsys:
++ unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
++err_alloc_chrdev:
++ class_destroy(gpio_dev_class);
++err_class_create:
++ printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
++ return err;
++}
++late_initcall(gpio_dev_init);
+diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/Kconfig linux-avr32/arch/avr32/mach-at32ap/Kconfig
+--- linux-2.6.24/arch/avr32/mach-at32ap/Kconfig 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/mach-at32ap/Kconfig 2008-02-01 14:51:35.000000000 -0500
+@@ -3,9 +3,9 @@ if PLATFORM_AT32AP
+ menu "Atmel AVR32 AP options"
+
+ choice
+- prompt "AT32AP7000 static memory bus width"
+- depends on CPU_AT32AP7000
+- default AP7000_16_BIT_SMC
++ prompt "AT32AP700x static memory bus width"
++ depends on CPU_AT32AP700X
++ default AP700X_16_BIT_SMC
+ help
+ Define the width of the AP7000 external static memory interface.
+ This is used to determine how to mangle the address and/or data
+@@ -15,17 +15,24 @@ choice
+ width for all chip selects, excluding the flash (which is using
+ raw access and is thus not affected by any of this.)
+
+-config AP7000_32_BIT_SMC
++config AP700X_32_BIT_SMC
+ bool "32 bit"
+
+-config AP7000_16_BIT_SMC
++config AP700X_16_BIT_SMC
+ bool "16 bit"
+
+-config AP7000_8_BIT_SMC
++config AP700X_8_BIT_SMC
+ bool "8 bit"
+
+ endchoice
+
++config GPIO_DEV
++ bool "GPIO /dev interface"
++ select CONFIGFS_FS
++ default n
++ help
++ Say `Y' to enable a /dev interface to the GPIO pins.
++
+ endmenu
+
+ endif # PLATFORM_AT32AP
+diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/Makefile linux-avr32/arch/avr32/mach-at32ap/Makefile
+--- linux-2.6.24/arch/avr32/mach-at32ap/Makefile 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/mach-at32ap/Makefile 2008-02-01 14:51:35.000000000 -0500
+@@ -1,4 +1,5 @@
+ obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
+-obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o
+-obj-$(CONFIG_CPU_AT32AP7000) += time-tc.o
++obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o
++obj-$(CONFIG_CPU_AT32AP700X) += time-tc.o
+ obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
++obj-$(CONFIG_GPIO_DEV) += gpio-dev.o
+diff -Nrup linux-2.6.24/arch/avr32/mach-at32ap/pio.c linux-avr32/arch/avr32/mach-at32ap/pio.c
+--- linux-2.6.24/arch/avr32/mach-at32ap/pio.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/mach-at32ap/pio.c 2008-02-01 14:51:35.000000000 -0500
+@@ -162,6 +162,82 @@ fail:
+ dump_stack();
+ }
+
++#ifdef CONFIG_GPIO_DEV
++
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port)
++{
++ return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
++}
++
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
++{
++ struct pio_device *pio;
++ u32 old, new;
++
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
++
++ /* Try to allocate the pins */
++ do {
++ old = pio->pinmux_mask;
++ if (old & pins)
++ return -EBUSY;
++
++ new = old | pins;
++ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++
++ /* That went well, now configure the port */
++ pio_writel(pio, OER, oe_mask);
++ pio_writel(pio, PER, pins);
++
++ return 0;
++}
++
++void at32_deselect_pins(unsigned int port, u32 pins)
++{
++ struct pio_device *pio;
++ u32 old, new;
++
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++ /* Return to a "safe" mux configuration */
++ pio_writel(pio, PUER, pins);
++ pio_writel(pio, ODR, pins);
++
++ /* Deallocate the pins */
++ do {
++ old = pio->pinmux_mask;
++ new = old & ~pins;
++ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++}
++
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
++{
++ struct pio_device *pio;
++
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++ return pio_readl(pio, PDSR) & pins;
++}
++
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
++{
++ struct pio_device *pio;
++
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++ /* No atomic updates for now... */
++ pio_writel(pio, CODR, ~value & mask);
++ pio_writel(pio, SODR, value & mask);
++}
++
++#endif /* CONFIG_GPIO_DEV */
++
++
+ /*--------------------------------------------------------------------------*/
+
+ /* GPIO API */
+diff -Nrup linux-2.6.24/arch/avr32/Makefile linux-avr32/arch/avr32/Makefile
+--- linux-2.6.24/arch/avr32/Makefile 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/Makefile 2008-02-01 14:51:35.000000000 -0500
+@@ -16,7 +16,7 @@ KBUILD_AFLAGS += -mrelax -mno-pic
+ CFLAGS_MODULE += -mno-relax
+ LDFLAGS_vmlinux += --relax
+
+-cpuflags-$(CONFIG_CPU_AT32AP7000) += -mcpu=ap7000
++cpuflags-$(CONFIG_PLATFORM_AT32AP) += -march=ap
+
+ KBUILD_CFLAGS += $(cpuflags-y)
+ KBUILD_AFLAGS += $(cpuflags-y)
+@@ -31,6 +31,8 @@ core-$(CONFIG_BOARD_ATNGW100) += arch/a
+ core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/
+ core-y += arch/avr32/kernel/
+ core-y += arch/avr32/mm/
++drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
++drivers-y += arch/avr32/drivers/
+ libs-y += arch/avr32/lib/
+
+ archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
+diff -Nrup linux-2.6.24/arch/avr32/mm/dma-coherent.c linux-avr32/arch/avr32/mm/dma-coherent.c
+--- linux-2.6.24/arch/avr32/mm/dma-coherent.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/mm/dma-coherent.c 2008-02-01 14:51:35.000000000 -0500
+@@ -41,6 +41,13 @@ static struct page *__dma_alloc(struct d
+ struct page *page, *free, *end;
+ int order;
+
++ /* Following is a work-around (a.k.a. hack) to prevent pages
++ * with __GFP_COMP being passed to split_page() which cannot
++ * handle them. The real problem is that this flag probably
++ * should be 0 on AVR32 as it is not supported on this
++ * platform--see CONFIG_HUGETLB_PAGE. */
++ gfp &= ~(__GFP_COMP);
++
+ size = PAGE_ALIGN(size);
+ order = get_order(size);
+
+diff -Nrup linux-2.6.24/arch/avr32/mm/tlb.c linux-avr32/arch/avr32/mm/tlb.c
+--- linux-2.6.24/arch/avr32/mm/tlb.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/arch/avr32/mm/tlb.c 2008-02-01 14:51:35.000000000 -0500
+@@ -348,7 +348,7 @@ static int tlb_show(struct seq_file *tlb
+ return 0;
+ }
+
+-static struct seq_operations tlb_ops = {
++static const struct seq_operations tlb_ops = {
+ .start = tlb_start,
+ .next = tlb_next,
+ .stop = tlb_stop,
+diff -Nrup linux-2.6.24/arch/avr32/oprofile/Makefile linux-avr32/arch/avr32/oprofile/Makefile
+--- linux-2.6.24/arch/avr32/oprofile/Makefile 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/oprofile/Makefile 2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,8 @@
++obj-$(CONFIG_OPROFILE) += oprofile.o
++
++oprofile-y := $(addprefix ../../../drivers/oprofile/, \
++ oprof.o cpu_buffer.o buffer_sync.o \
++ event_buffer.o oprofile_files.o \
++ oprofilefs.o oprofile_stats.o \
++ timer_int.o)
++oprofile-y += op_model_avr32.o
+diff -Nrup linux-2.6.24/arch/avr32/oprofile/op_model_avr32.c linux-avr32/arch/avr32/oprofile/op_model_avr32.c
+--- linux-2.6.24/arch/avr32/oprofile/op_model_avr32.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/arch/avr32/oprofile/op_model_avr32.c 2008-02-01 14:51:35.000000000 -0500
+@@ -0,0 +1,235 @@
++/*
++ * AVR32 Performance Counter Driver
++ *
++ * Copyright (C) 2005-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Author: Ronny Pedersen
++ */
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/oprofile.h>
++#include <linux/sched.h>
++#include <linux/types.h>
++
++#include <asm/intc.h>
++#include <asm/sysreg.h>
++#include <asm/system.h>
++
++#define AVR32_PERFCTR_IRQ_GROUP 0
++#define AVR32_PERFCTR_IRQ_LINE 1
++
++enum { PCCNT, PCNT0, PCNT1, NR_counter };
++
++struct avr32_perf_counter {
++ unsigned long enabled;
++ unsigned long event;
++ unsigned long count;
++ unsigned long unit_mask;
++ unsigned long kernel;
++ unsigned long user;
++
++ u32 ie_mask;
++ u32 flag_mask;
++};
++
++static struct avr32_perf_counter counter[NR_counter] = {
++ {
++ .ie_mask = SYSREG_BIT(IEC),
++ .flag_mask = SYSREG_BIT(FC),
++ }, {
++ .ie_mask = SYSREG_BIT(IE0),
++ .flag_mask = SYSREG_BIT(F0),
++ }, {
++ .ie_mask = SYSREG_BIT(IE1),
++ .flag_mask = SYSREG_BIT(F1),
++ },
++};
++
++static void avr32_perf_counter_reset(void)
++{
++ /* Reset all counter and disable/clear all interrupts */
++ sysreg_write(PCCR, (SYSREG_BIT(PCCR_R)
++ | SYSREG_BIT(PCCR_C)
++ | SYSREG_BIT(FC)
++ | SYSREG_BIT(F0)
++ | SYSREG_BIT(F1)));
++}
++
++static irqreturn_t avr32_perf_counter_interrupt(int irq, void *dev_id)
++{
++ struct avr32_perf_counter *ctr = dev_id;
++ struct pt_regs *regs;
++ u32 pccr;
++
++ if (likely(!(intc_get_pending(AVR32_PERFCTR_IRQ_GROUP)
++ & (1 << AVR32_PERFCTR_IRQ_LINE))))
++ return IRQ_NONE;
++
++ regs = get_irq_regs();
++ pccr = sysreg_read(PCCR);
++
++ /* Clear the interrupt flags we're about to handle */
++ sysreg_write(PCCR, pccr);
++
++ /* PCCNT */
++ if (ctr->enabled && (pccr & ctr->flag_mask)) {
++ sysreg_write(PCCNT, -ctr->count);
++ oprofile_add_sample(regs, PCCNT);
++ }
++ ctr++;
++ /* PCNT0 */
++ if (ctr->enabled && (pccr & ctr->flag_mask)) {
++ sysreg_write(PCNT0, -ctr->count);
++ oprofile_add_sample(regs, PCNT0);
++ }
++ ctr++;
++ /* PCNT1 */
++ if (ctr->enabled && (pccr & ctr->flag_mask)) {
++ sysreg_write(PCNT1, -ctr->count);
++ oprofile_add_sample(regs, PCNT1);
++ }
++
++ return IRQ_HANDLED;
++}
++
++static int avr32_perf_counter_create_files(struct super_block *sb,
++ struct dentry *root)
++{
++ struct dentry *dir;
++ unsigned int i;
++ char filename[4];
++
++ for (i = 0; i < NR_counter; i++) {
++ snprintf(filename, sizeof(filename), "%u", i);
++ dir = oprofilefs_mkdir(sb, root, filename);
++
++ oprofilefs_create_ulong(sb, dir, "enabled",
++ &counter[i].enabled);
++ oprofilefs_create_ulong(sb, dir, "event",
++ &counter[i].event);
++ oprofilefs_create_ulong(sb, dir, "count",
++ &counter[i].count);
++
++ /* Dummy entries */
++ oprofilefs_create_ulong(sb, dir, "kernel",
++ &counter[i].kernel);
++ oprofilefs_create_ulong(sb, dir, "user",
++ &counter[i].user);
++ oprofilefs_create_ulong(sb, dir, "unit_mask",
++ &counter[i].unit_mask);
++ }
++
++ return 0;
++}
++
++static int avr32_perf_counter_setup(void)
++{
++ struct avr32_perf_counter *ctr;
++ u32 pccr;
++ int ret;
++ int i;
++
++ pr_debug("avr32_perf_counter_setup\n");
++
++ if (sysreg_read(PCCR) & SYSREG_BIT(PCCR_E)) {
++ printk(KERN_ERR
++ "oprofile: setup: perf counter already enabled\n");
++ return -EBUSY;
++ }
++
++ ret = request_irq(AVR32_PERFCTR_IRQ_GROUP,
++ avr32_perf_counter_interrupt, IRQF_SHARED,
++ "oprofile", counter);
++ if (ret)
++ return ret;
++
++ avr32_perf_counter_reset();
++
++ pccr = 0;
++ for (i = PCCNT; i < NR_counter; i++) {
++ ctr = &counter[i];
++ if (!ctr->enabled)
++ continue;
++
++ pr_debug("enabling counter %d...\n", i);
++
++ pccr |= ctr->ie_mask;
++
++ switch (i) {
++ case PCCNT:
++ /* PCCNT always counts cycles, so no events */
++ sysreg_write(PCCNT, -ctr->count);
++ break;
++ case PCNT0:
++ pccr |= SYSREG_BF(CONF0, ctr->event);
++ sysreg_write(PCNT0, -ctr->count);
++ break;
++ case PCNT1:
++ pccr |= SYSREG_BF(CONF1, ctr->event);
++ sysreg_write(PCNT1, -ctr->count);
++ break;
++ }
++ }
++
++ pr_debug("oprofile: writing 0x%x to PCCR...\n", pccr);
++
++ sysreg_write(PCCR, pccr);
++
++ return 0;
++}
++
++static void avr32_perf_counter_shutdown(void)
++{
++ pr_debug("avr32_perf_counter_shutdown\n");
++
++ avr32_perf_counter_reset();
++ free_irq(AVR32_PERFCTR_IRQ_GROUP, counter);
++}
++
++static int avr32_perf_counter_start(void)
++{
++ pr_debug("avr32_perf_counter_start\n");
++
++ sysreg_write(PCCR, sysreg_read(PCCR) | SYSREG_BIT(PCCR_E));
++
++ return 0;
++}
++
++static void avr32_perf_counter_stop(void)
++{
++ pr_debug("avr32_perf_counter_stop\n");
++
++ sysreg_write(PCCR, sysreg_read(PCCR) & ~SYSREG_BIT(PCCR_E));
++}
++
++static struct oprofile_operations avr32_perf_counter_ops __initdata = {
++ .create_files = avr32_perf_counter_create_files,
++ .setup = avr32_perf_counter_setup,
++ .shutdown = avr32_perf_counter_shutdown,
++ .start = avr32_perf_counter_start,
++ .stop = avr32_perf_counter_stop,
++ .cpu_type = "avr32",
++};
++
++int __init oprofile_arch_init(struct oprofile_operations *ops)
++{
++ if (!(current_cpu_data.features & AVR32_FEATURE_PCTR))
++ return -ENODEV;
++
++ memcpy(ops, &avr32_perf_counter_ops,
++ sizeof(struct oprofile_operations));
++
++ printk(KERN_INFO "oprofile: using AVR32 performance monitoring.\n");
++
++ return 0;
++}
++
++void oprofile_arch_exit(void)
++{
++
++}
+diff -Nrup linux-2.6.24/Documentation/kernel-parameters.txt linux-avr32/Documentation/kernel-parameters.txt
+--- linux-2.6.24/Documentation/kernel-parameters.txt 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/Documentation/kernel-parameters.txt 2008-02-01 14:51:34.000000000 -0500
+@@ -34,6 +34,7 @@ parameter is applicable:
+ ALSA ALSA sound support is enabled.
+ APIC APIC support is enabled.
+ APM Advanced Power Management support is enabled.
++ AVR32 AVR32 architecture is enabled.
+ AX25 Appropriate AX.25 support is enabled.
+ BLACKFIN Blackfin architecture is enabled.
+ DRM Direct Rendering Management support is enabled.
+@@ -1123,6 +1124,10 @@ and is between 256 and 4096 characters.
+ of returning the full 64-bit number.
+ The default is to return 64-bit inode numbers.
+
++ nmi_debug= [KNL,AVR32] Specify one or more actions to take
++ when a NMI is triggered.
++ Format: [state][,regs][,debounce][,die]
++
+ nmi_watchdog= [KNL,BUGS=X86-32] Debugging features for SMP kernels
+
+ no387 [BUGS=X86-32] Tells the kernel to use the 387 maths
+diff -Nrup linux-2.6.24/drivers/i2c/busses/i2c-atmeltwi.c linux-avr32/drivers/i2c/busses/i2c-atmeltwi.c
+--- linux-2.6.24/drivers/i2c/busses/i2c-atmeltwi.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/drivers/i2c/busses/i2c-atmeltwi.c 2008-02-01 14:51:37.000000000 -0500
+@@ -0,0 +1,436 @@
++/*
++ * i2c Support for Atmel's Two-Wire Interface (TWI)
++ *
++ * Based on the work of Copyright (C) 2004 Rick Bronson
++ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
++ * Ported to AVR32 and heavily modified by Espen Krangnes
++ * <ekrangnes at atmel.com>
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * Borrowed heavily from the original work by:
++ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
++ *
++ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
++ * bugs removed, interrupt routine markedly rewritten
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++#undef VERBOSE_DEBUG
++
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/i2c.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/completion.h>
++#include <linux/io.h>
++
++#include "i2c-atmeltwi.h"
++
++static unsigned int baudrate = 100 * 1000;
++module_param(baudrate, uint, S_IRUGO);
++MODULE_PARM_DESC(baudrate, "The TWI baudrate");
++
++
++struct atmel_twi {
++ void __iomem *regs;
++ struct i2c_adapter adapter;
++ struct clk *pclk;
++ struct completion comp;
++ u32 mask;
++ u8 *buf;
++ u16 len;
++ u16 acks_left;
++ int status;
++ unsigned int irq;
++
++};
++#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
++
++/*
++ * (Re)Initialize the TWI hardware registers.
++ */
++static int twi_hwinit(struct atmel_twi *twi)
++{
++ unsigned long cdiv, ckdiv = 0;
++
++ /* REVISIT: wait till SCL is high before resetting; otherwise,
++ * some versions will wedge forever.
++ */
++
++ twi_writel(twi, IDR, ~0UL);
++ twi_writel(twi, CR, TWI_BIT(SWRST)); /*Reset peripheral*/
++ twi_readl(twi, SR);
++
++ cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
++
++ while (cdiv > 255) {
++ ckdiv++;
++ cdiv = cdiv >> 1;
++ }
++
++ /* REVISIT: there are various errata to consider re CDIV and CHDIV
++ * here, at least on at91 parts.
++ */
++
++ if (ckdiv > 7)
++ return -EINVAL;
++ else
++ twi_writel(twi, CWGR, TWI_BF(CKDIV, ckdiv)
++ | TWI_BF(CHDIV, cdiv)
++ | TWI_BF(CLDIV, cdiv));
++ return 0;
++}
++
++/*
++ * Waits for the i2c status register to set the specified bitmask
++ * Returns 0 if timed out ... ~100ms is much longer than the SMBus
++ * limit, but I2C has no limit at all.
++ */
++static int twi_complete(struct atmel_twi *twi, u32 mask)
++{
++ int timeout = msecs_to_jiffies(100);
++
++ mask |= TWI_BIT(TXCOMP);
++ twi->mask = mask | TWI_BIT(NACK) | TWI_BIT(OVRE);
++ init_completion(&twi->comp);
++
++ twi_writel(twi, IER, mask);
++
++ if (!wait_for_completion_timeout(&twi->comp, timeout)) {
++ /* RESET TWI interface */
++ twi_writel(twi, CR, TWI_BIT(SWRST));
++
++ /* Reinitialize TWI */
++ twi_hwinit(twi);
++
++ return -ETIMEDOUT;
++ }
++ return 0;
++}
++
++/*
++ * Generic i2c master transfer entrypoint.
++ */
++static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num)
++{
++ struct atmel_twi *twi = to_atmel_twi(adap);
++ int i;
++
++ dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
++
++ twi->status = 0;
++ for (i = 0; i < num; i++, pmsg++) {
++ twi->len = pmsg->len;
++ twi->buf = pmsg->buf;
++ twi->acks_left = pmsg->len;
++ twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
++ (pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
++ twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
++
++ dev_dbg(&adap->dev,
++ "#%d: %s %d byte%s %s dev 0x%02x\n",
++ i,
++ pmsg->flags & I2C_M_RD ? "reading" : "writing",
++ pmsg->len,
++ pmsg->len > 1 ? "s" : "",
++ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
++
++ /* enable */
++ twi_writel(twi, CR, TWI_BIT(MSEN));
++
++ if (pmsg->flags & I2C_M_RD) {
++ /* cleanup after previous RX overruns */
++ while (twi_readl(twi, SR) & TWI_BIT(RXRDY))
++ twi_readl(twi, RHR);
++
++ if (twi->len == 1)
++ twi_writel(twi, CR,
++ TWI_BIT(START) | TWI_BIT(STOP));
++ else
++ twi_writel(twi, CR, TWI_BIT(START));
++
++ if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
++ dev_dbg(&adap->dev, "RX[%d] timeout. "
++ "Stopped with %d bytes left\n",
++ i, twi->acks_left);
++ return -ETIMEDOUT;
++ }
++ } else {
++ twi_writel(twi, THR, twi->buf[0]);
++ twi->acks_left--;
++ /* REVISIT: some chips don't start automagically:
++ * twi_writel(twi, CR, TWI_BIT(START));
++ */
++ if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
++ dev_dbg(&adap->dev, "TX[%d] timeout. "
++ "Stopped with %d bytes left\n",
++ i, twi->acks_left);
++ return -ETIMEDOUT;
++ }
++ /* REVISIT: an erratum workaround may be needed here;
++ * see sam9261 "STOP not generated" (START either).
++ */
++ }
++
++ /* Disable TWI interface */
++ twi_writel(twi, CR, TWI_BIT(MSDIS));
++
++ if (twi->status)
++ return twi->status;
++
++ /* WARNING: This driver lies about properly supporting
++ * repeated start, or it would *ALWAYS* return here. It
++ * has issued a STOP. Continuing is a false claim -- that
++ * a second (or third, etc.) message is part of the same
++ * "combined" (no STOPs between parts) message.
++ */
++
++ } /* end cur msg */
++
++ return i;
++}
++
++
++static irqreturn_t twi_interrupt(int irq, void *dev_id)
++{
++ struct atmel_twi *twi = dev_id;
++ int status = twi_readl(twi, SR);
++
++ /* Save state for later debug prints */
++ int old_status = status;
++
++ if (twi->mask & status) {
++
++ status &= twi->mask;
++
++ if (status & TWI_BIT(RXRDY)) {
++ if ((status & TWI_BIT(OVRE)) && twi->acks_left) {
++ /* Note weakness in fault reporting model:
++ * we can't say "the first N of these data
++ * bytes are valid".
++ */
++ dev_err(&twi->adapter.dev,
++ "OVERRUN RX! %04x, lost %d\n",
++ old_status, twi->acks_left);
++ twi->acks_left = 0;
++ twi_writel(twi, CR, TWI_BIT(STOP));
++ twi->status = -EOVERFLOW;
++ } else if (twi->acks_left > 0) {
++ twi->buf[twi->len - twi->acks_left] =
++ twi_readl(twi, RHR);
++ twi->acks_left--;
++ }
++ if (status & TWI_BIT(TXCOMP))
++ goto done;
++ if (twi->acks_left == 1)
++ twi_writel(twi, CR, TWI_BIT(STOP));
++
++ } else if (status & (TWI_BIT(NACK) | TWI_BIT(TXCOMP))) {
++ goto done;
++
++ } else if (status & TWI_BIT(TXRDY)) {
++ if (twi->acks_left > 0) {
++ twi->acks_left--;
++ twi_writel(twi, THR,
++ twi->buf[twi->len - twi->acks_left]);
++ } else
++ twi_writel(twi, CR, TWI_BIT(STOP));
++ }
++
++ if (twi->acks_left == 0)
++ twi_writel(twi, IDR, ~TWI_BIT(TXCOMP));
++ }
++
++ /* enabling this message helps trigger overruns/underruns ... */
++ dev_vdbg(&twi->adapter.dev,
++ "ISR: SR 0x%04X, mask 0x%04X, acks %i\n",
++ old_status,
++ twi->acks_left ? twi->mask : TWI_BIT(TXCOMP),
++ twi->acks_left);
++
++ return IRQ_HANDLED;
++
++done:
++ /* Note weak fault reporting model: we can't report how many
++ * bytes we sent before the NAK, or let upper layers choose
++ * whether to continue. The I2C stack doesn't allow that...
++ */
++ if (status & TWI_BIT(NACK)) {
++ dev_dbg(&twi->adapter.dev, "NACK received! %d to go\n",
++ twi->acks_left);
++ twi->status = -EPIPE;
++
++ /* TX underrun morphs automagically into a premature STOP;
++ * we'll probably observe UVRE even when it's not documented.
++ */
++ } else if (twi->acks_left && (twi->mask & TWI_BIT(TXRDY))) {
++ dev_err(&twi->adapter.dev, "UNDERRUN TX! %04x, %d to go\n",
++ old_status, twi->acks_left);
++ twi->status = -ENOSR;
++ }
++
++ twi_writel(twi, IDR, ~0UL);
++ complete(&twi->comp);
++
++ dev_dbg(&twi->adapter.dev, "ISR: SR 0x%04X, acks %i --> %d\n",
++ old_status, twi->acks_left, twi->status);
++
++ return IRQ_HANDLED;
++}
++
++
++/*
++ * Return list of supported functionality.
++ *
++ * NOTE: see warning above about repeated starts; this driver is falsely
++ * claiming to support "combined" transfers. The mid-message STOPs mean
++ * some slaves will never work with this driver. (Use i2c-gpio...)
++ */
++static u32 twi_func(struct i2c_adapter *adapter)
++{
++ return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL)
++ & ~I2C_FUNC_SMBUS_QUICK;
++}
++
++static struct i2c_algorithm twi_algorithm = {
++ .master_xfer = twi_xfer,
++ .functionality = twi_func,
++};
++
++/*
++ * Main initialization routine.
++ */
++static int __init twi_probe(struct platform_device *pdev)
++{
++ struct atmel_twi *twi;
++ struct resource *regs;
++ struct clk *pclk;
++ struct i2c_adapter *adapter;
++ int rc, irq;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++
++ pclk = clk_get(&pdev->dev, "twi_pclk");
++ if (IS_ERR(pclk))
++ return PTR_ERR(pclk);
++ clk_enable(pclk);
++
++ rc = -ENOMEM;
++ twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
++ if (!twi) {
++ dev_dbg(&pdev->dev, "can't allocate interface!\n");
++ goto err_alloc_twi;
++ }
++
++ twi->pclk = pclk;
++ twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!twi->regs)
++ goto err_ioremap;
++
++ irq = platform_get_irq(pdev, 0);
++ rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
++ if (rc) {
++ dev_dbg(&pdev->dev, "can't bind irq!\n");
++ goto err_irq;
++ }
++ twi->irq = irq;
++
++ rc = twi_hwinit(twi);
++ if (rc) {
++ dev_err(&pdev->dev, "Unable to set baudrate\n");
++ goto err_hw_init;
++ }
++
++ adapter = &twi->adapter;
++ sprintf(adapter->name, "TWI");
++ adapter->algo = &twi_algorithm;
++ adapter->class = I2C_CLASS_ALL;
++ adapter->nr = pdev->id;
++ adapter->dev.parent = &pdev->dev;
++
++ platform_set_drvdata(pdev, twi);
++
++ rc = i2c_add_numbered_adapter(adapter);
++ if (rc) {
++ dev_dbg(&pdev->dev, "Adapter %s registration failed\n",
++ adapter->name);
++ goto err_register;
++ }
++
++ dev_info(&pdev->dev,
++ "Atmel TWI/I2C adapter (baudrate %dk) at 0x%08lx.\n",
++ baudrate/1000, (unsigned long)regs->start);
++
++ return 0;
++
++
++err_register:
++ platform_set_drvdata(pdev, NULL);
++
++err_hw_init:
++ free_irq(irq, twi);
++
++err_irq:
++ iounmap(twi->regs);
++
++err_ioremap:
++ kfree(twi);
++
++err_alloc_twi:
++ clk_disable(pclk);
++ clk_put(pclk);
++
++ return rc;
++}
++
++static int __exit twi_remove(struct platform_device *pdev)
++{
++ struct atmel_twi *twi = platform_get_drvdata(pdev);
++ int res;
++
++ platform_set_drvdata(pdev, NULL);
++ res = i2c_del_adapter(&twi->adapter);
++ twi_writel(twi, CR, TWI_BIT(MSDIS));
++ iounmap(twi->regs);
++ clk_disable(twi->pclk);
++ clk_put(twi->pclk);
++ free_irq(twi->irq, twi);
++ kfree(twi);
++
++ return res;
++}
++
++static struct platform_driver twi_driver = {
++ .remove = __exit_p(twi_remove),
++ .driver = {
++ .name = "atmel_twi",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init atmel_twi_init(void)
++{
++ return platform_driver_probe(&twi_driver, twi_probe);
++}
++
++static void __exit atmel_twi_exit(void)
++{
++ platform_driver_unregister(&twi_driver);
++}
++
++module_init(atmel_twi_init);
++module_exit(atmel_twi_exit);
++
++MODULE_AUTHOR("Espen Krangnes");
++MODULE_DESCRIPTION("I2C driver for Atmel TWI");
++MODULE_LICENSE("GPL");
+diff -Nrup linux-2.6.24/drivers/i2c/busses/i2c-atmeltwi.h linux-avr32/drivers/i2c/busses/i2c-atmeltwi.h
+--- linux-2.6.24/drivers/i2c/busses/i2c-atmeltwi.h 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/drivers/i2c/busses/i2c-atmeltwi.h 2008-02-01 14:51:37.000000000 -0500
+@@ -0,0 +1,117 @@
++/*
++ * Register definitions for the Atmel Two-Wire Interface
++ */
++
++#ifndef __ATMELTWI_H__
++#define __ATMELTWI_H__
++
++/* TWI register offsets */
++#define TWI_CR 0x0000
++#define TWI_MMR 0x0004
++#define TWI_SMR 0x0008
++#define TWI_IADR 0x000c
++#define TWI_CWGR 0x0010
++#define TWI_SR 0x0020
++#define TWI_IER 0x0024
++#define TWI_IDR 0x0028
++#define TWI_IMR 0x002c
++#define TWI_RHR 0x0030
++#define TWI_THR 0x0034
++
++/* Bitfields in CR */
++#define TWI_START_OFFSET 0
++#define TWI_START_SIZE 1
++#define TWI_STOP_OFFSET 1
++#define TWI_STOP_SIZE 1
++#define TWI_MSEN_OFFSET 2
++#define TWI_MSEN_SIZE 1
++#define TWI_MSDIS_OFFSET 3
++#define TWI_MSDIS_SIZE 1
++#define TWI_SVEN_OFFSET 4
++#define TWI_SVEN_SIZE 1
++#define TWI_SVDIS_OFFSET 5
++#define TWI_SVDIS_SIZE 1
++#define TWI_SWRST_OFFSET 7
++#define TWI_SWRST_SIZE 1
++
++/* Bitfields in MMR */
++#define TWI_IADRSZ_OFFSET 8
++#define TWI_IADRSZ_SIZE 2
++#define TWI_MREAD_OFFSET 12
++#define TWI_MREAD_SIZE 1
++#define TWI_DADR_OFFSET 16
++#define TWI_DADR_SIZE 7
++
++/* Bitfields in SMR */
++#define TWI_SADR_OFFSET 16
++#define TWI_SADR_SIZE 7
++
++/* Bitfields in IADR */
++#define TWI_IADR_OFFSET 0
++#define TWI_IADR_SIZE 24
++
++/* Bitfields in CWGR */
++#define TWI_CLDIV_OFFSET 0
++#define TWI_CLDIV_SIZE 8
++#define TWI_CHDIV_OFFSET 8
++#define TWI_CHDIV_SIZE 8
++#define TWI_CKDIV_OFFSET 16
++#define TWI_CKDIV_SIZE 3
++
++/* Bitfields in SR */
++#define TWI_TXCOMP_OFFSET 0
++#define TWI_TXCOMP_SIZE 1
++#define TWI_RXRDY_OFFSET 1
++#define TWI_RXRDY_SIZE 1
++#define TWI_TXRDY_OFFSET 2
++#define TWI_TXRDY_SIZE 1
++#define TWI_SVDIR_OFFSET 3
++#define TWI_SVDIR_SIZE 1
++#define TWI_SVACC_OFFSET 4
++#define TWI_SVACC_SIZE 1
++#define TWI_GCACC_OFFSET 5
++#define TWI_GCACC_SIZE 1
++#define TWI_OVRE_OFFSET 6
++#define TWI_OVRE_SIZE 1
++#define TWI_UNRE_OFFSET 7
++#define TWI_UNRE_SIZE 1
++#define TWI_NACK_OFFSET 8
++#define TWI_NACK_SIZE 1
++#define TWI_ARBLST_OFFSET 9
++#define TWI_ARBLST_SIZE 1
++
++/* Bitfields in RHR */
++#define TWI_RXDATA_OFFSET 0
++#define TWI_RXDATA_SIZE 8
++
++/* Bitfields in THR */
++#define TWI_TXDATA_OFFSET 0
++#define TWI_TXDATA_SIZE 8
++
++/* Constants for IADRSZ */
++#define TWI_IADRSZ_NO_ADDR 0
++#define TWI_IADRSZ_ONE_BYTE 1
++#define TWI_IADRSZ_TWO_BYTES 2
++#define TWI_IADRSZ_THREE_BYTES 3
++
++/* Bit manipulation macros */
++#define TWI_BIT(name) \
++ (1 << TWI_##name##_OFFSET)
++#define TWI_BF(name, value) \
++ (((value) & ((1 << TWI_##name##_SIZE) - 1)) \
++ << TWI_##name##_OFFSET)
++#define TWI_BFEXT(name, value) \
++ (((value) >> TWI_##name##_OFFSET) \
++ & ((1 << TWI_##name##_SIZE) - 1))
++#define TWI_BFINS(name, value, old) \
++ (((old) & ~(((1 << TWI_##name##_SIZE) - 1) \
++ << TWI_##name##_OFFSET)) \
++ | TWI_BF(name, (value)))
++
++/* Register access macros */
++#define twi_readl(port, reg) \
++ __raw_readl((port)->regs + TWI_##reg)
++#define twi_writel(port, reg, value) \
++ __raw_writel((value), (port)->regs + TWI_##reg)
++
++#endif /* __ATMELTWI_H__ */
+diff -Nrup linux-2.6.24/drivers/i2c/busses/Kconfig linux-avr32/drivers/i2c/busses/Kconfig
+--- linux-2.6.24/drivers/i2c/busses/Kconfig 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/i2c/busses/Kconfig 2008-02-01 14:51:37.000000000 -0500
+@@ -88,6 +88,14 @@ config I2C_AT91
+ to support combined I2C messages. Use the i2c-gpio driver
+ unless your system can cope with those limitations.
+
++config I2C_ATMELTWI
++ tristate "Atmel Two-Wire Interface (TWI)"
++ depends on I2C && (ARCH_AT91 || PLATFORM_AT32AP)
++ help
++ Atmel on-chip TWI controller. Say Y if you have an AT32 or
++ AT91-based device and want to use its built-in TWI
++ functionality.
++
+ config I2C_AU1550
+ tristate "Au1550/Au1200 SMBus interface"
+ depends on SOC_AU1550 || SOC_AU1200
+diff -Nrup linux-2.6.24/drivers/i2c/busses/Makefile linux-avr32/drivers/i2c/busses/Makefile
+--- linux-2.6.24/drivers/i2c/busses/Makefile 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/i2c/busses/Makefile 2008-02-01 14:51:37.000000000 -0500
+@@ -53,6 +53,7 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
+ obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
+ obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
++obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
+
+ ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+ EXTRA_CFLAGS += -DDEBUG
+diff -Nrup linux-2.6.24/drivers/leds/Kconfig linux-avr32/drivers/leds/Kconfig
+--- linux-2.6.24/drivers/leds/Kconfig 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/leds/Kconfig 2008-02-01 14:51:38.000000000 -0500
+@@ -18,6 +18,13 @@ config LEDS_CLASS
+
+ comment "LED drivers"
+
++config LEDS_ATMEL_PWM
++ tristate "LED Support using Atmel PWM outputs"
++ depends on LEDS_CLASS && ATMEL_PWM
++ help
++ This option enables support for LEDs driven using outputs
++ of the dedicated PWM controller found on newer Atmel SOCs.
++
+ config LEDS_CORGI
+ tristate "LED Support for the Sharp SL-C7x0 series"
+ depends on LEDS_CLASS && PXA_SHARP_C7xx
+diff -Nrup linux-2.6.24/drivers/leds/leds-atmel-pwm.c linux-avr32/drivers/leds/leds-atmel-pwm.c
+--- linux-2.6.24/drivers/leds/leds-atmel-pwm.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/drivers/leds/leds-atmel-pwm.c 2008-02-01 14:51:38.000000000 -0500
+@@ -0,0 +1,157 @@
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/io.h>
++#include <linux/atmel_pwm.h>
++
++
++struct pwmled {
++ struct led_classdev cdev;
++ struct pwm_channel pwmc;
++ struct gpio_led *desc;
++ u32 mult;
++ u8 active_low;
++};
++
++
++/*
++ * For simplicity, we use "brightness" as if it were a linear function
++ * of PWM duty cycle. However, a logarithmic function of duty cycle is
++ * probably a better match for perceived brightness: two is half as bright
++ * as four, four is half as bright as eight, etc
++ */
++static void pwmled_brightness(struct led_classdev *cdev, enum led_brightness b)
++{
++ struct pwmled *led;
++
++ /* update the duty cycle for the *next* period */
++ led = container_of(cdev, struct pwmled, cdev);
++ pwm_channel_writel(&led->pwmc, PWM_CUPD, led->mult * (unsigned) b);
++}
++
++/*
++ * NOTE: we reuse the platform_data structure of GPIO leds,
++ * but repurpose its "gpio" number as a PWM channel number.
++ */
++static int __init pwmled_probe(struct platform_device *pdev)
++{
++ const struct gpio_led_platform_data *pdata;
++ struct pwmled *leds;
++ unsigned i;
++ int status;
++
++ pdata = pdev->dev.platform_data;
++ if (!pdata || pdata->num_leds < 1)
++ return -ENODEV;
++
++ leds = kcalloc(pdata->num_leds, sizeof(*leds), GFP_KERNEL);
++ if (!leds)
++ return -ENOMEM;
++
++ for (i = 0; i < pdata->num_leds; i++) {
++ struct pwmled *led = leds + i;
++ const struct gpio_led *dat = pdata->leds + i;
++ u32 tmp;
++
++ led->cdev.name = dat->name;
++ led->cdev.brightness = LED_OFF;
++ led->cdev.brightness_set = pwmled_brightness;
++ led->cdev.default_trigger = dat->default_trigger;
++
++ led->active_low = dat->active_low;
++
++ status = pwm_channel_alloc(dat->gpio, &led->pwmc);
++ if (status < 0)
++ goto err;
++
++ /*
++ * Prescale clock by 2^x, so PWM counts in low MHz.
++ * Start each cycle with the LED active, so increasing
++ * the duty cycle gives us more time on (== brighter).
++ */
++ tmp = 5;
++ if (!led->active_low)
++ tmp |= PWM_CPR_CPOL;
++ pwm_channel_writel(&led->pwmc, PWM_CMR, tmp);
++
++ /*
++ * Pick a period so PWM cycles at 100+ Hz; and a multiplier
++ * for scaling duty cycle: brightness * mult.
++ */
++ tmp = (led->pwmc.mck / (1 << 5)) / 100;
++ tmp /= 255;
++ led->mult = tmp;
++ pwm_channel_writel(&led->pwmc, PWM_CDTY,
++ led->cdev.brightness * 255);
++ pwm_channel_writel(&led->pwmc, PWM_CPRD,
++ LED_FULL * tmp);
++
++ pwm_channel_enable(&led->pwmc);
++
++ /* Hand it over to the LED framework */
++ status = led_classdev_register(&pdev->dev, &led->cdev);
++ if (status < 0) {
++ pwm_channel_free(&led->pwmc);
++ goto err;
++ }
++ }
++
++ platform_set_drvdata(pdev, leds);
++ return 0;
++
++err:
++ if (i > 0) {
++ for (i = i - 1; i >= 0; i--) {
++ led_classdev_unregister(&leds[i].cdev);
++ pwm_channel_free(&leds[i].pwmc);
++ }
++ }
++ kfree(leds);
++
++ return status;
++}
++
++static int __exit pwmled_remove(struct platform_device *pdev)
++{
++ const struct gpio_led_platform_data *pdata;
++ struct pwmled *leds;
++ unsigned i;
++
++ pdata = pdev->dev.platform_data;
++ leds = platform_get_drvdata(pdev);
++
++ for (i = 0; i < pdata->num_leds; i++) {
++ struct pwmled *led = leds + i;
++
++ led_classdev_unregister(&led->cdev);
++ pwm_channel_free(&led->pwmc);
++ }
++
++ kfree(leds);
++ platform_set_drvdata(pdev, NULL);
++ return 0;
++}
++
++static struct platform_driver pwmled_driver = {
++ .driver = {
++ .name = "leds-atmel-pwm",
++ .owner = THIS_MODULE,
++ },
++ /* REVISIT add suspend() and resume() methods */
++ .remove = __exit_p(pwmled_remove),
++};
++
++static int __init modinit(void)
++{
++ return platform_driver_probe(&pwmled_driver, pwmled_probe);
++}
++module_init(modinit);
++
++static void __exit modexit(void)
++{
++ platform_driver_unregister(&pwmled_driver);
++}
++module_exit(modexit);
++
++MODULE_DESCRIPTION("Driver for LEDs with PWM-controlled brightness");
++MODULE_LICENSE("GPL");
+diff -Nrup linux-2.6.24/drivers/leds/Makefile linux-avr32/drivers/leds/Makefile
+--- linux-2.6.24/drivers/leds/Makefile 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/leds/Makefile 2008-02-01 14:51:38.000000000 -0500
+@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o
+ obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
+
+ # LED Platform Drivers
++obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-atmel-pwm.o
+ obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
+ obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
+ obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o
+diff -Nrup linux-2.6.24/drivers/misc/atmel_pwm.c linux-avr32/drivers/misc/atmel_pwm.c
+--- linux-2.6.24/drivers/misc/atmel_pwm.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/drivers/misc/atmel_pwm.c 2008-02-01 14:51:39.000000000 -0500
+@@ -0,0 +1,409 @@
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/atmel_pwm.h>
++
++
++/*
++ * This is a simple driver for the PWM controller found in various newer
++ * Atmel SOCs, including the AVR32 series and the AT91sam9263.
++ *
++ * Chips with current Linux ports have only 4 PWM channels, out of max 32.
++ * AT32UC3A and AT32UC3B chips have 7 channels (but currently no Linux).
++ * Docs are inconsistent about the width of the channel counter registers;
++ * it's at least 16 bits, but several places say 20 bits.
++ */
++#define PWM_NCHAN 4 /* max 32 */
++
++struct pwm {
++ spinlock_t lock;
++ struct platform_device *pdev;
++ u32 mask;
++ int irq;
++ void __iomem *base;
++ struct clk *clk;
++ struct pwm_channel *channel[PWM_NCHAN];
++ void (*handler[PWM_NCHAN])(struct pwm_channel *);
++};
++
++
++/* global PWM controller registers */
++#define PWM_MR 0x00
++#define PWM_ENA 0x04
++#define PWM_DIS 0x08
++#define PWM_SR 0x0c
++#define PWM_IER 0x10
++#define PWM_IDR 0x14
++#define PWM_IMR 0x18
++#define PWM_ISR 0x1c
++
++static inline void pwm_writel(const struct pwm *p, unsigned offset, u32 val)
++{
++ __raw_writel(val, p->base + offset);
++}
++
++static inline u32 pwm_readl(const struct pwm *p, unsigned offset)
++{
++ return __raw_readl(p->base + offset);
++}
++
++static inline void __iomem *pwmc_regs(const struct pwm *p, int index)
++{
++ return p->base + 0x200 + index * 0x20;
++}
++
++static struct pwm *pwm;
++
++static void pwm_dumpregs(struct pwm_channel *ch, char *tag)
++{
++ struct device *dev = &pwm->pdev->dev;
++
++ dev_dbg(dev, "%s: mr %08x, sr %08x, imr %08x\n",
++ tag,
++ pwm_readl(pwm, PWM_MR),
++ pwm_readl(pwm, PWM_SR),
++ pwm_readl(pwm, PWM_IMR));
++ dev_dbg(dev,
++ "pwm ch%d - mr %08x, dty %u, prd %u, cnt %u\n",
++ ch->index,
++ pwm_channel_readl(ch, PWM_CMR),
++ pwm_channel_readl(ch, PWM_CDTY),
++ pwm_channel_readl(ch, PWM_CPRD),
++ pwm_channel_readl(ch, PWM_CCNT));
++}
++
++
++/**
++ * pwm_channel_alloc - allocate an unused PWM channel
++ * @index: identifies the channel
++ * @ch: structure to be initialized
++ *
++ * Drivers allocate PWM channels according to the board's wiring, and
++ * matching board-specific setup code. Returns zero or negative errno.
++ */
++int pwm_channel_alloc(int index, struct pwm_channel *ch)
++{
++ unsigned long flags;
++ int status = 0;
++
++ /* insist on PWM init, with this signal pinned out */
++ if (!pwm || !(pwm->mask & 1 << index))
++ return -ENODEV;
++
++ if (index < 0 || index >= PWM_NCHAN || !ch)
++ return -EINVAL;
++ memset(ch, 0, sizeof *ch);
++
++ spin_lock_irqsave(&pwm->lock, flags);
++ if (pwm->channel[index])
++ status = -EBUSY;
++ else {
++ clk_enable(pwm->clk);
++
++ ch->regs = pwmc_regs(pwm, index);
++ ch->index = index;
++
++ /* REVISIT: ap7000 seems to go 2x as fast as we expect!! */
++ ch->mck = clk_get_rate(pwm->clk);
++
++ pwm->channel[index] = ch;
++ pwm->handler[index] = NULL;
++
++ /* channel and irq are always disabled when we return */
++ pwm_writel(pwm, PWM_DIS, 1 << index);
++ pwm_writel(pwm, PWM_IDR, 1 << index);
++ }
++ spin_unlock_irqrestore(&pwm->lock, flags);
++ return status;
++}
++EXPORT_SYMBOL(pwm_channel_alloc);
++
++static int pwmcheck(struct pwm_channel *ch)
++{
++ int index;
++
++ if (!pwm)
++ return -ENODEV;
++ if (!ch)
++ return -EINVAL;
++ index = ch->index;
++ if (index < 0 || index >= PWM_NCHAN || pwm->channel[index] != ch)
++ return -EINVAL;
++
++ return index;
++}
++
++/**
++ * pwm_channel_free - release a previously allocated channel
++ * @ch: the channel being released
++ *
++ * The channel is completely shut down (counter and IRQ disabled),
++ * and made available for re-use. Returns zero, or negative errno.
++ */
++int pwm_channel_free(struct pwm_channel *ch)
++{
++ unsigned long flags;
++ int t;
++
++ spin_lock_irqsave(&pwm->lock, flags);
++ t = pwmcheck(ch);
++ if (t >= 0) {
++ pwm->channel[t] = NULL;
++ pwm->handler[t] = NULL;
++
++ /* channel and irq are always disabled when we return */
++ pwm_writel(pwm, PWM_DIS, 1 << t);
++ pwm_writel(pwm, PWM_IDR, 1 << t);
++
++ clk_disable(pwm->clk);
++ t = 0;
++ }
++ spin_unlock_irqrestore(&pwm->lock, flags);
++ return t;
++}
++EXPORT_SYMBOL(pwm_channel_free);
++
++int __pwm_channel_onoff(struct pwm_channel *ch, int enabled)
++{
++ unsigned long flags;
++ int t;
++
++ /* OMITTED FUNCTIONALITY: starting several channels in synch */
++
++ spin_lock_irqsave(&pwm->lock, flags);
++ t = pwmcheck(ch);
++ if (t >= 0) {
++ pwm_writel(pwm, enabled ? PWM_ENA : PWM_DIS, 1 << t);
++ t = 0;
++ pwm_dumpregs(ch, enabled ? "enable" : "disable");
++ }
++ spin_unlock_irqrestore(&pwm->lock, flags);
++
++ return t;
++}
++EXPORT_SYMBOL(__pwm_channel_onoff);
++
++/**
++ * pwm_clk_alloc - allocate and configure CLKA or CLKB
++ * @prescale: from 0..10, the power of two used to divide MCK
++ * @div: from 1..255, the linear divisor to use
++ *
++ * Returns PWM_CPR_CLKA, PWM_CPR_CLKB, or negative errno. The allocated
++ * clock will run with a period of (2^prescale * div) / MCK, or twice as
++ * long if center aligned PWM output is used. The clock must later be
++ * deconfigured using pwm_clk_free().
++ */
++int pwm_clk_alloc(unsigned prescale, unsigned div)
++{
++ unsigned long flags;
++ u32 mr;
++ u32 val = (prescale << 8) | div;
++ int ret = -EBUSY;
++
++ if (prescale >= 10 || div == 0 || div > 255)
++ return -EINVAL;
++
++ spin_lock_irqsave(&pwm->lock, flags);
++ mr = pwm_readl(pwm, PWM_MR);
++ if ((mr & 0xffff) == 0) {
++ mr |= val;
++ ret = PWM_CPR_CLKA;
++ }
++ if ((mr & (0xffff << 16)) == 0) {
++ mr |= val << 16;
++ ret = PWM_CPR_CLKB;
++ }
++ if (ret > 0)
++ pwm_writel(pwm, PWM_MR, mr);
++ spin_unlock_irqrestore(&pwm->lock, flags);
++ return ret;
++}
++EXPORT_SYMBOL(pwm_clk_alloc);
++
++/**
++ * pwm_clk_free - deconfigure and release CLKA or CLKB
++ *
++ * Reverses the effect of pwm_clk_alloc().
++ */
++void pwm_clk_free(unsigned clk)
++{
++ unsigned long flags;
++ u32 mr;
++
++ spin_lock_irqsave(&pwm->lock, flags);
++ mr = pwm_readl(pwm, PWM_MR);
++ if (clk == PWM_CPR_CLKA)
++ pwm_writel(pwm, PWM_MR, mr & ~(0xffff << 0));
++ if (clk == PWM_CPR_CLKB)
++ pwm_writel(pwm, PWM_MR, mr & ~(0xffff << 16));
++ spin_unlock_irqrestore(&pwm->lock, flags);
++}
++EXPORT_SYMBOL(pwm_clk_free);
++
++/**
++ * pwm_channel_handler - manage channel's IRQ handler
++ * @ch: the channel
++ * @handler: the handler to use, possibly NULL
++ *
++ * If the handler is non-null, the handler will be called after every
++ * period of this PWM channel. If the handler is null, this channel
++ * won't generate an IRQ.
++ */
++int pwm_channel_handler(struct pwm_channel *ch,
++ void (*handler)(struct pwm_channel *ch))
++{
++ unsigned long flags;
++ int t;
++
++ spin_lock_irqsave(&pwm->lock, flags);
++ t = pwmcheck(ch);
++ if (t >= 0) {
++ pwm->handler[t] = handler;
++ pwm_writel(pwm, handler ? PWM_IER : PWM_IDR, 1 << t);
++ t = 0;
++ }
++ spin_unlock_irqrestore(&pwm->lock, flags);
++
++ return t;
++}
++EXPORT_SYMBOL(pwm_channel_handler);
++
++static irqreturn_t pwm_irq(int id, void *_pwm)
++{
++ struct pwm *p = _pwm;
++ irqreturn_t handled = IRQ_NONE;
++ u32 irqstat;
++ int index;
++
++ spin_lock(&p->lock);
++
++ /* ack irqs, then handle them */
++ irqstat = pwm_readl(pwm, PWM_ISR);
++
++ while (irqstat) {
++ struct pwm_channel *ch;
++ void (*handler)(struct pwm_channel *ch);
++
++ index = ffs(irqstat) - 1;
++ irqstat &= ~(1 << index);
++ ch = pwm->channel[index];
++ handler = pwm->handler[index];
++ if (handler && ch) {
++ spin_unlock(&p->lock);
++ handler(ch);
++ spin_lock(&p->lock);
++ handled = IRQ_HANDLED;
++ }
++ }
++
++ spin_unlock(&p->lock);
++ return handled;
++}
++
++static int __init pwm_probe(struct platform_device *pdev)
++{
++ struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ int irq = platform_get_irq(pdev, 0);
++ u32 *mp = pdev->dev.platform_data;
++ struct pwm *p;
++ int status = -EIO;
++
++ if (pwm)
++ return -EBUSY;
++ if (!r || irq < 0 || !mp || !*mp)
++ return -ENODEV;
++ if (*mp & ~((1<<PWM_NCHAN)-1)) {
++ dev_warn(&pdev->dev, "mask 0x%x ... more than %d channels\n",
++ *mp, PWM_NCHAN);
++ return -EINVAL;
++ }
++
++ p = kzalloc(sizeof(*p), GFP_KERNEL);
++ if (!p)
++ return -ENOMEM;
++
++ spin_lock_init(&p->lock);
++ p->pdev = pdev;
++ p->mask = *mp;
++ p->irq = irq;
++ p->base = ioremap(r->start, r->end - r->start + 1);
++ if (!p->base)
++ goto fail;
++ p->clk = clk_get(&pdev->dev, "mck");
++ if (IS_ERR(p->clk)) {
++ status = PTR_ERR(p->clk);
++ p->clk = NULL;
++ goto fail;
++ }
++
++ status = request_irq(irq, pwm_irq, 0, pdev->name, p);
++ if (status < 0)
++ goto fail;
++
++ pwm = p;
++ platform_set_drvdata(pdev, p);
++
++ return 0;
++
++fail:
++ if (p->clk)
++ clk_put(p->clk);
++ if (p->base)
++ iounmap(p->base);
++
++ kfree(p);
++ return status;
++}
++
++static int __exit pwm_remove(struct platform_device *pdev)
++{
++ struct pwm *p = platform_get_drvdata(pdev);
++
++ if (p != pwm)
++ return -EINVAL;
++
++ clk_enable(pwm->clk);
++ pwm_writel(pwm, PWM_DIS, (1 << PWM_NCHAN) - 1);
++ pwm_writel(pwm, PWM_IDR, (1 << PWM_NCHAN) - 1);
++ clk_disable(pwm->clk);
++
++ pwm = NULL;
++
++ free_irq(p->irq, p);
++ clk_put(p->clk);
++ iounmap(p->base);
++ kfree(p);
++
++ return 0;
++}
++
++static struct platform_driver atmel_pwm_driver = {
++ .driver = {
++ .name = "atmel_pwm",
++ .owner = THIS_MODULE,
++ },
++ .remove = __exit_p(pwm_remove),
++
++ /* NOTE: PWM can keep running in AVR32 "idle" and "frozen" states;
++ * and all AT91sam9263 states, albeit at reduced clock rate if
++ * MCK becomes the slow clock (i.e. what Linux labels STR).
++ */
++};
++
++static int __init pwm_init(void)
++{
++ return platform_driver_probe(&atmel_pwm_driver, pwm_probe);
++}
++module_init(pwm_init);
++
++static void __exit pwm_exit(void)
++{
++ platform_driver_unregister(&atmel_pwm_driver);
++}
++module_exit(pwm_exit);
++
++MODULE_DESCRIPTION("Driver for AT32/AT91 PWM module");
++MODULE_LICENSE("GPL");
+diff -Nrup linux-2.6.24/drivers/misc/Kconfig linux-avr32/drivers/misc/Kconfig
+--- linux-2.6.24/drivers/misc/Kconfig 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/misc/Kconfig 2008-02-01 14:51:39.000000000 -0500
+@@ -13,6 +13,15 @@ menuconfig MISC_DEVICES
+
+ if MISC_DEVICES
+
++config ATMEL_PWM
++ tristate "Atmel AT32/AT91 PWM support"
++ depends on (AVR32 || AT91) && EXPERIMENTAL
++ help
++ This option enables device driver support for the PWM channels
++ on certain Atmel prcoessors. Pulse Width Modulation is used for
++ purposes including software controlled power-efficent backlights
++ on LCD displays, motor control, and waveform generation.
++
+ config IBM_ASM
+ tristate "Device driver for IBM RSA service processor"
+ depends on X86 && PCI && INPUT && EXPERIMENTAL
+diff -Nrup linux-2.6.24/drivers/misc/Makefile linux-avr32/drivers/misc/Makefile
+--- linux-2.6.24/drivers/misc/Makefile 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/misc/Makefile 2008-02-01 14:51:39.000000000 -0500
+@@ -7,6 +7,7 @@ obj-$(CONFIG_IBM_ASM) += ibmasm/
+ obj-$(CONFIG_HDPU_FEATURES) += hdpuftrs/
+ obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o
+ obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o
++obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
+ obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
+ obj-$(CONFIG_LKDTM) += lkdtm.o
+ obj-$(CONFIG_TIFM_CORE) += tifm_core.o
+diff -Nrup linux-2.6.24/drivers/mmc/host/atmel-mci.c linux-avr32/drivers/mmc/host/atmel-mci.c
+--- linux-2.6.24/drivers/mmc/host/atmel-mci.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/drivers/mmc/host/atmel-mci.c 2008-02-01 14:51:39.000000000 -0500
+@@ -0,0 +1,1176 @@
++/*
++ * Atmel MultiMedia Card Interface driver
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/blkdev.h>
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/ioport.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <linux/mmc/host.h>
++
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++#include "atmel-mci.h"
++
++#define DRIVER_NAME "atmel_mci"
++
++#define MCI_DATA_ERROR_FLAGS (MCI_BIT(DCRCE) | MCI_BIT(DTOE) | \
++ MCI_BIT(OVRE) | MCI_BIT(UNRE))
++
++enum {
++ EVENT_CMD_COMPLETE = 0,
++ EVENT_DATA_COMPLETE,
++ EVENT_DATA_ERROR,
++ EVENT_STOP_SENT,
++ EVENT_STOP_COMPLETE,
++ EVENT_DMA_COMPLETE,
++ EVENT_DMA_ERROR,
++ EVENT_CARD_DETECT,
++};
++
++struct atmel_mci_dma {
++ struct dma_request_sg req;
++ unsigned short rx_periph_id;
++ unsigned short tx_periph_id;
++};
++
++struct atmel_mci {
++ struct mmc_host *mmc;
++ void __iomem *regs;
++ struct atmel_mci_dma dma;
++
++ struct mmc_request *mrq;
++ struct mmc_command *cmd;
++ struct mmc_data *data;
++
++ u32 cmd_status;
++ u32 data_status;
++ u32 stop_status;
++ u32 stop_cmdr;
++
++ struct tasklet_struct tasklet;
++ unsigned long pending_events;
++ unsigned long completed_events;
++
++ int present;
++ int detect_pin;
++ int wp_pin;
++
++ unsigned long bus_hz;
++ unsigned long mapbase;
++ struct clk *mck;
++ struct platform_device *pdev;
++
++#ifdef CONFIG_DEBUG_FS
++ struct dentry *debugfs_root;
++ struct dentry *debugfs_regs;
++ struct dentry *debugfs_req;
++ struct dentry *debugfs_pending_events;
++ struct dentry *debugfs_completed_events;
++#endif
++};
++
++/* Those printks take an awful lot of time... */
++#ifndef DEBUG
++static unsigned int fmax = 15000000U;
++#else
++static unsigned int fmax = 1000000U;
++#endif
++module_param(fmax, uint, 0444);
++MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
++
++/* Test bit macros for completed events */
++#define mci_cmd_is_complete(host) \
++ test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_data_is_complete(host) \
++ test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_data_error_is_complete(host) \
++ test_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_stop_sent_is_complete(host) \
++ test_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_stop_is_complete(host) \
++ test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_dma_is_complete(host) \
++ test_bit(EVENT_DMA_COMPLETE, &host->completed_events)
++#define mci_dma_error_is_complete(host) \
++ test_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_card_detect_is_complete(host) \
++ test_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Test and clear bit macros for pending events */
++#define mci_clear_cmd_is_pending(host) \
++ test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_clear_data_is_pending(host) \
++ test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_clear_data_error_is_pending(host) \
++ test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_clear_stop_sent_is_pending(host) \
++ test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_clear_stop_is_pending(host) \
++ test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_clear_dma_error_is_pending(host) \
++ test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_clear_card_detect_is_pending(host) \
++ test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++/* Test and set bit macros for completed events */
++#define mci_set_cmd_is_completed(host) \
++ test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_set_data_is_completed(host) \
++ test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_set_data_error_is_completed(host) \
++ test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_set_stop_sent_is_completed(host) \
++ test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_set_stop_is_completed(host) \
++ test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_dma_error_is_completed(host) \
++ test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_set_card_detect_is_completed(host) \
++ test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Set bit macros for completed events */
++#define mci_set_cmd_complete(host) \
++ set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_set_data_complete(host) \
++ set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_set_data_error_complete(host) \
++ set_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_set_stop_sent_complete(host) \
++ set_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_set_stop_complete(host) \
++ set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_dma_complete(host) \
++ set_bit(EVENT_DMA_COMPLETE, &host->completed_events)
++#define mci_set_dma_error_complete(host) \
++ set_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_set_card_detect_complete(host) \
++ set_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Set bit macros for pending events */
++#define mci_set_cmd_pending(host) \
++ set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_set_data_pending(host) \
++ set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_set_data_error_pending(host) \
++ set_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_set_stop_sent_pending(host) \
++ set_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_set_stop_pending(host) \
++ set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_set_dma_error_pending(host) \
++ set_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_set_card_detect_pending(host) \
++ set_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++/* Clear bit macros for pending events */
++#define mci_clear_cmd_pending(host) \
++ clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_clear_data_pending(host) \
++ clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_clear_data_error_pending(host) \
++ clear_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_clear_stop_sent_pending(host) \
++ clear_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_clear_stop_pending(host) \
++ clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_clear_dma_error_pending(host) \
++ clear_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_clear_card_detect_pending(host) \
++ clear_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++
++#ifdef CONFIG_DEBUG_FS
++#include <linux/debugfs.h>
++
++#define DBG_REQ_BUF_SIZE (4096 - sizeof(unsigned int))
++
++struct req_dbg_data {
++ unsigned int nbytes;
++ char str[DBG_REQ_BUF_SIZE];
++};
++
++static int req_dbg_open(struct inode *inode, struct file *file)
++{
++ struct atmel_mci *host;
++ struct mmc_request *mrq;
++ struct mmc_command *cmd, *stop;
++ struct mmc_data *data;
++ struct req_dbg_data *priv;
++ char *str;
++ unsigned long n = 0;
++
++ priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
++ if (!priv)
++ return -ENOMEM;
++ str = priv->str;
++
++ mutex_lock(&inode->i_mutex);
++ host = inode->i_private;
++
++ spin_lock_irq(&host->mmc->lock);
++ mrq = host->mrq;
++ if (mrq) {
++ cmd = mrq->cmd;
++ data = mrq->data;
++ stop = mrq->stop;
++ n = snprintf(str, DBG_REQ_BUF_SIZE,
++ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
++ cmd->opcode, cmd->arg, cmd->flags,
++ cmd->resp[0], cmd->resp[1], cmd->resp[2],
++ cmd->resp[3], cmd->error);
++ if (n < DBG_REQ_BUF_SIZE && data)
++ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
++ "DATA %u * %u (%u) %x (err %u)\n",
++ data->blocks, data->blksz,
++ data->bytes_xfered, data->flags,
++ data->error);
++ if (n < DBG_REQ_BUF_SIZE && stop)
++ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
++ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
++ stop->opcode, stop->arg, stop->flags,
++ stop->resp[0], stop->resp[1],
++ stop->resp[2], stop->resp[3],
++ stop->error);
++ }
++ spin_unlock_irq(&host->mmc->lock);
++ mutex_unlock(&inode->i_mutex);
++
++ priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
++ file->private_data = priv;
++
++ return 0;
++}
++
++static ssize_t req_dbg_read(struct file *file, char __user *buf,
++ size_t nbytes, loff_t *ppos)
++{
++ struct req_dbg_data *priv = file->private_data;
++
++ return simple_read_from_buffer(buf, nbytes, ppos,
++ priv->str, priv->nbytes);
++}
++
++static int req_dbg_release(struct inode *inode, struct file *file)
++{
++ kfree(file->private_data);
++ return 0;
++}
++
++static const struct file_operations req_dbg_fops = {
++ .owner = THIS_MODULE,
++ .open = req_dbg_open,
++ .llseek = no_llseek,
++ .read = req_dbg_read,
++ .release = req_dbg_release,
++};
++
++static int regs_dbg_open(struct inode *inode, struct file *file)
++{
++ struct atmel_mci *host;
++ unsigned int i;
++ u32 *data;
++ int ret = -ENOMEM;
++
++ mutex_lock(&inode->i_mutex);
++ host = inode->i_private;
++ data = kmalloc(inode->i_size, GFP_KERNEL);
++ if (!data)
++ goto out;
++
++ spin_lock_irq(&host->mmc->lock);
++ for (i = 0; i < inode->i_size / 4; i++)
++ data[i] = __raw_readl(host->regs + i * 4);
++ spin_unlock_irq(&host->mmc->lock);
++
++ file->private_data = data;
++ ret = 0;
++
++out:
++ mutex_unlock(&inode->i_mutex);
++
++ return ret;
++}
++
++static ssize_t regs_dbg_read(struct file *file, char __user *buf,
++ size_t nbytes, loff_t *ppos)
++{
++ struct inode *inode = file->f_dentry->d_inode;
++ int ret;
++
++ mutex_lock(&inode->i_mutex);
++ ret = simple_read_from_buffer(buf, nbytes, ppos,
++ file->private_data,
++ file->f_dentry->d_inode->i_size);
++ mutex_unlock(&inode->i_mutex);
++
++ return ret;
++}
++
++static int regs_dbg_release(struct inode *inode, struct file *file)
++{
++ kfree(file->private_data);
++ return 0;
++}
++
++static const struct file_operations regs_dbg_fops = {
++ .owner = THIS_MODULE,
++ .open = regs_dbg_open,
++ .llseek = generic_file_llseek,
++ .read = regs_dbg_read,
++ .release = regs_dbg_release,
++};
++
++static void atmci_init_debugfs(struct atmel_mci *host)
++{
++ struct mmc_host *mmc;
++ struct dentry *root, *regs;
++ struct resource *res;
++
++ mmc = host->mmc;
++ root = debugfs_create_dir(mmc_hostname(mmc), NULL);
++ if (IS_ERR(root) || !root)
++ goto err_root;
++ host->debugfs_root = root;
++
++ regs = debugfs_create_file("regs", 0400, root, host, &regs_dbg_fops);
++ if (!regs)
++ goto err_regs;
++
++ res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
++ regs->d_inode->i_size = res->end - res->start + 1;
++ host->debugfs_regs = regs;
++
++ host->debugfs_req = debugfs_create_file("req", 0400, root,
++ host, &req_dbg_fops);
++ if (!host->debugfs_req)
++ goto err_req;
++
++ host->debugfs_pending_events
++ = debugfs_create_u32("pending_events", 0400, root,
++ (u32 *)&host->pending_events);
++ if (!host->debugfs_pending_events)
++ goto err_pending_events;
++
++ host->debugfs_completed_events
++ = debugfs_create_u32("completed_events", 0400, root,
++ (u32 *)&host->completed_events);
++ if (!host->debugfs_completed_events)
++ goto err_completed_events;
++
++ return;
++
++err_completed_events:
++ debugfs_remove(host->debugfs_pending_events);
++err_pending_events:
++ debugfs_remove(host->debugfs_req);
++err_req:
++ debugfs_remove(host->debugfs_regs);
++err_regs:
++ debugfs_remove(host->debugfs_root);
++err_root:
++ host->debugfs_root = NULL;
++ dev_err(&host->pdev->dev,
++ "failed to initialize debugfs for %s\n",
++ mmc_hostname(mmc));
++}
++
++static void atmci_cleanup_debugfs(struct atmel_mci *host)
++{
++ if (host->debugfs_root) {
++ debugfs_remove(host->debugfs_completed_events);
++ debugfs_remove(host->debugfs_pending_events);
++ debugfs_remove(host->debugfs_req);
++ debugfs_remove(host->debugfs_regs);
++ debugfs_remove(host->debugfs_root);
++ host->debugfs_root = NULL;
++ }
++}
++#else
++static inline void atmci_init_debugfs(struct atmel_mci *host)
++{
++
++}
++
++static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
++{
++
++}
++#endif /* CONFIG_DEBUG_FS */
++
++static inline unsigned int ns_to_clocks(struct atmel_mci *host,
++ unsigned int ns)
++{
++ return (ns * (host->bus_hz / 1000000) + 999) / 1000;
++}
++
++static void atmci_set_timeout(struct atmel_mci *host,
++ struct mmc_data *data)
++{
++ static unsigned dtomul_to_shift[] = {
++ 0, 4, 7, 8, 10, 12, 16, 20
++ };
++ unsigned timeout;
++ unsigned dtocyc, dtomul;
++
++ timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
++
++ for (dtomul = 0; dtomul < 8; dtomul++) {
++ unsigned shift = dtomul_to_shift[dtomul];
++ dtocyc = (timeout + (1 << shift) - 1) >> shift;
++ if (dtocyc < 15)
++ break;
++ }
++
++ if (dtomul >= 8) {
++ dtomul = 7;
++ dtocyc = 15;
++ }
++
++ dev_dbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
++ dtocyc << dtomul_to_shift[dtomul]);
++ mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
++ | MCI_BF(DTOCYC, dtocyc)));
++}
++
++/*
++ * Return mask with command flags to be enabled for this command.
++ */
++static u32 atmci_prepare_command(struct mmc_host *mmc,
++ struct mmc_command *cmd)
++{
++ u32 cmdr;
++
++ cmd->error = 0;
++
++ cmdr = MCI_BF(CMDNB, cmd->opcode);
++
++ if (cmd->flags & MMC_RSP_PRESENT) {
++ if (cmd->flags & MMC_RSP_136)
++ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
++ else
++ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
++ }
++
++ /*
++ * This should really be MAXLAT_5 for CMD2 and ACMD41, but
++ * it's too difficult to determine whether this is an ACMD or
++ * not. Better make it 64.
++ */
++ cmdr |= MCI_BIT(MAXLAT);
++
++ if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
++ cmdr |= MCI_BIT(OPDCMD);
++
++ dev_dbg(&mmc->class_dev,
++ "cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
++ cmd->opcode, cmd->arg, cmd->flags, (unsigned long)cmdr);
++
++ return cmdr;
++}
++
++static void atmci_start_command(struct atmel_mci *host,
++ struct mmc_command *cmd,
++ u32 cmd_flags)
++{
++ WARN_ON(host->cmd);
++ host->cmd = cmd;
++
++ mci_writel(host, ARGR, cmd->arg);
++ mci_writel(host, CMDR, cmd_flags);
++
++ if (cmd->data)
++ dma_start_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++}
++
++/*
++ * Returns a mask of flags to be set in the command register when the
++ * command to start the transfer is to be sent.
++ */
++static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++ u32 cmd_flags;
++
++ WARN_ON(host->data);
++ host->data = data;
++
++ atmci_set_timeout(host, data);
++ mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
++ | MCI_BF(BLKLEN, data->blksz)));
++ host->dma.req.block_size = data->blksz;
++ host->dma.req.nr_blocks = data->blocks;
++
++ cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
++ if (data->flags & MMC_DATA_STREAM)
++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
++ else if (data->blocks > 1)
++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
++ else
++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
++
++ if (data->flags & MMC_DATA_READ) {
++ cmd_flags |= MCI_BIT(TRDIR);
++ host->dma.req.nr_sg
++ = dma_map_sg(&host->pdev->dev, data->sg,
++ data->sg_len, DMA_FROM_DEVICE);
++ host->dma.req.periph_id = host->dma.rx_periph_id;
++ host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
++ host->dma.req.data_reg = host->mapbase + MCI_RDR;
++ } else {
++ host->dma.req.nr_sg
++ = dma_map_sg(&host->pdev->dev, data->sg,
++ data->sg_len, DMA_TO_DEVICE);
++ host->dma.req.periph_id = host->dma.tx_periph_id;
++ host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
++ host->dma.req.data_reg = host->mapbase + MCI_TDR;
++ }
++ host->dma.req.sg = data->sg;
++
++ dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
++
++ return cmd_flags;
++}
++
++static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++ struct mmc_data *data = mrq->data;
++ u32 iflags;
++ u32 cmdflags = 0;
++
++ iflags = mci_readl(host, IMR);
++ if (iflags)
++ dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
++ mci_readl(host, IMR));
++
++ WARN_ON(host->mrq != NULL);
++ host->mrq = mrq;
++ host->pending_events = 0;
++ host->completed_events = 0;
++
++ iflags = MCI_BIT(CMDRDY);
++ cmdflags = atmci_prepare_command(mmc, mrq->cmd);
++
++ if (mrq->stop) {
++ WARN_ON(!data);
++
++ host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
++ host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
++ if (!(data->flags & MMC_DATA_WRITE))
++ host->stop_cmdr |= MCI_BIT(TRDIR);
++ if (data->flags & MMC_DATA_STREAM)
++ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
++ else
++ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
++ }
++ if (data) {
++ cmdflags |= atmci_prepare_data(mmc, data);
++ iflags |= MCI_DATA_ERROR_FLAGS;
++ }
++
++ atmci_start_command(host, mrq->cmd, cmdflags);
++ mci_writel(host, IER, iflags);
++}
++
++static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++ u32 mr;
++
++ if (ios->clock) {
++ u32 clkdiv;
++
++ /* Set clock rate */
++ clkdiv = host->bus_hz / (2 * ios->clock) - 1;
++ if (clkdiv > 255) {
++ dev_warn(&mmc->class_dev,
++ "clock %u too slow; using %lu\n",
++ ios->clock, host->bus_hz / (2 * 256));
++ clkdiv = 255;
++ }
++
++ mr = mci_readl(host, MR);
++ mr = MCI_BFINS(CLKDIV, clkdiv, mr)
++ | MCI_BIT(WRPROOF) | MCI_BIT(RDPROOF);
++ mci_writel(host, MR, mr);
++
++ /* Enable the MCI controller */
++ mci_writel(host, CR, MCI_BIT(MCIEN));
++ } else {
++ /* Disable the MCI controller */
++ mci_writel(host, CR, MCI_BIT(MCIDIS));
++ }
++
++ switch (ios->bus_width) {
++ case MMC_BUS_WIDTH_1:
++ mci_writel(host, SDCR, 0);
++ break;
++ case MMC_BUS_WIDTH_4:
++ mci_writel(host, SDCR, MCI_BIT(SDCBUS));
++ break;
++ }
++
++ switch (ios->power_mode) {
++ case MMC_POWER_ON:
++ /* Send init sequence (74 clock cycles) */
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CMDR, MCI_BF(SPCMD, MCI_SPCMD_INIT_CMD));
++ while (!(mci_readl(host, SR) & MCI_BIT(CMDRDY)))
++ cpu_relax();
++ break;
++ default:
++ /*
++ * TODO: None of the currently available AVR32-based
++ * boards allow MMC power to be turned off. Implement
++ * power control when this can be tested properly.
++ */
++ break;
++ }
++}
++
++static int atmci_get_ro(struct mmc_host *mmc)
++{
++ int read_only = 0;
++ struct atmel_mci *host = mmc_priv(mmc);
++
++ if (host->wp_pin >= 0) {
++ read_only = gpio_get_value(host->wp_pin);
++ dev_dbg(&mmc->class_dev, "card is %s\n",
++ read_only ? "read-only" : "read-write");
++ } else {
++ dev_dbg(&mmc->class_dev,
++ "no pin for checking read-only switch."
++ " Assuming write-enable.\n");
++ }
++
++ return read_only;
++}
++
++static struct mmc_host_ops atmci_ops = {
++ .request = atmci_request,
++ .set_ios = atmci_set_ios,
++ .get_ro = atmci_get_ro,
++};
++
++static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++
++ WARN_ON(host->cmd || host->data);
++ host->mrq = NULL;
++
++ mmc_request_done(mmc, mrq);
++}
++
++static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
++ u32 flags)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++
++ atmci_start_command(host, data->stop, host->stop_cmdr | flags);
++ mci_writel(host, IER, MCI_BIT(CMDRDY));
++}
++
++static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
++{
++ host->data = NULL;
++ dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
++ ((data->flags & MMC_DATA_WRITE)
++ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
++
++ /*
++ * Data might complete before command for very short transfers
++ * (like READ_SCR)
++ */
++ if (mci_cmd_is_complete(host)
++ && (!data->stop || mci_stop_is_complete(host)))
++ atmci_request_end(host->mmc, data->mrq);
++}
++
++static void atmci_command_complete(struct atmel_mci *host,
++ struct mmc_command *cmd, u32 status)
++{
++ if (status & MCI_BIT(RTOE))
++ cmd->error = -ETIMEDOUT;
++ else if ((cmd->flags & MMC_RSP_CRC)
++ && (status & MCI_BIT(RCRCE)))
++ cmd->error = -EILSEQ;
++ else if (status & (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | MCI_BIT(RENDE)))
++ cmd->error = -EIO;
++
++ if (cmd->error) {
++ dev_dbg(&host->mmc->class_dev,
++ "command error: op=0x%x status=0x%08x\n",
++ cmd->opcode, status);
++
++ if (cmd->data) {
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++ mci_writel(host, IDR, MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS);
++ host->data = NULL;
++ }
++ }
++}
++
++static void atmci_tasklet_func(unsigned long priv)
++{
++ struct mmc_host *mmc = (struct mmc_host *)priv;
++ struct atmel_mci *host = mmc_priv(mmc);
++ struct mmc_request *mrq = host->mrq;
++ struct mmc_data *data = host->data;
++
++ dev_vdbg(&mmc->class_dev,
++ "tasklet: pending/completed/mask %lx/%lx/%x\n",
++ host->pending_events, host->completed_events,
++ mci_readl(host, IMR));
++
++ if (mci_clear_cmd_is_pending(host)) {
++ mci_set_cmd_complete(host);
++ atmci_command_complete(host, mrq->cmd, host->cmd_status);
++ if (!host->data || mci_data_is_complete(host)
++ || mci_data_error_is_complete(host))
++ atmci_request_end(mmc, mrq);
++ }
++ if (mci_clear_stop_is_pending(host)) {
++ mci_set_stop_complete(host);
++ atmci_command_complete(host, mrq->stop, host->stop_status);
++ if (mci_data_is_complete(host)
++ || mci_data_error_is_complete(host))
++ atmci_request_end(mmc, mrq);
++ }
++ if (mci_clear_dma_error_is_pending(host)) {
++ mci_set_dma_error_complete(host);
++ mci_clear_data_pending(host);
++
++ /* DMA controller got bus error => invalid address */
++ data->error = -EIO;
++
++ dev_dbg(&mmc->class_dev, "dma error after %u bytes xfered\n",
++ host->data->bytes_xfered);
++
++ if (data->stop
++ && !mci_set_stop_sent_is_completed(host))
++ /* TODO: Check if card is still present */
++ send_stop_cmd(host->mmc, data, 0);
++
++ atmci_data_complete(host, data);
++ }
++ if (mci_clear_data_error_is_pending(host)) {
++ u32 status = host->data_status;
++
++ mci_set_data_error_complete(host);
++ mci_clear_data_pending(host);
++
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++
++ if (status & MCI_BIT(DCRCE)) {
++ dev_dbg(&mmc->class_dev, "data CRC error\n");
++ data->error = -EILSEQ;
++ } else if (status & MCI_BIT(DTOE)) {
++ dev_dbg(&mmc->class_dev, "data timeout error\n");
++ data->error = -ETIMEDOUT;
++ } else {
++ dev_dbg(&mmc->class_dev, "data FIFO error\n");
++ data->error = -EIO;
++ }
++ dev_dbg(&mmc->class_dev, "bytes xfered: %u\n",
++ data->bytes_xfered);
++
++ if (data->stop
++ && !mci_set_stop_sent_is_completed(host))
++ /* TODO: Check if card is still present */
++ send_stop_cmd(host->mmc, data, 0);
++
++ atmci_data_complete(host, data);
++ }
++ if (mci_clear_data_is_pending(host)) {
++ mci_set_data_complete(host);
++ data->bytes_xfered = data->blocks * data->blksz;
++ atmci_data_complete(host, data);
++ }
++ if (mci_clear_card_detect_is_pending(host)) {
++ /* Reset controller if card is gone */
++ if (!host->present) {
++ mci_writel(host, CR, MCI_BIT(SWRST));
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CR, MCI_BIT(MCIEN));
++ }
++
++ /* Clean up queue if present */
++ if (mrq) {
++ if (!mci_cmd_is_complete(host))
++ mrq->cmd->error = -ETIMEDOUT;
++ if (mrq->data && !mci_data_is_complete(host)
++ && !mci_data_error_is_complete(host)) {
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++ host->data->error = -ETIMEDOUT;
++ atmci_data_complete(host, data);
++ }
++ if (mrq->stop && !mci_stop_is_complete(host))
++ mrq->stop->error = -ETIMEDOUT;
++
++ host->cmd = NULL;
++ atmci_request_end(mmc, mrq);
++ }
++ mmc_detect_change(host->mmc, msecs_to_jiffies(100));
++ }
++}
++
++static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++ struct mmc_command *cmd = host->cmd;
++
++ /*
++ * Read the response now so that we're free to send a new
++ * command immediately.
++ */
++ cmd->resp[0] = mci_readl(host, RSPR);
++ cmd->resp[1] = mci_readl(host, RSPR);
++ cmd->resp[2] = mci_readl(host, RSPR);
++ cmd->resp[3] = mci_readl(host, RSPR);
++
++ mci_writel(host, IDR, MCI_BIT(CMDRDY));
++ host->cmd = NULL;
++
++ if (mci_stop_sent_is_complete(host)) {
++ host->stop_status = status;
++ mci_set_stop_pending(host);
++ } else {
++ if (host->mrq->stop && mci_dma_is_complete(host)
++ && !mci_set_stop_sent_is_completed(host))
++ send_stop_cmd(host->mmc, host->data, 0);
++ host->cmd_status = status;
++ mci_set_cmd_pending(host);
++ }
++
++ tasklet_schedule(&host->tasklet);
++}
++
++static void atmci_xfer_complete(struct dma_request *_req)
++{
++ struct dma_request_sg *req = to_dma_request_sg(_req);
++ struct atmel_mci_dma *dma;
++ struct atmel_mci *host;
++ struct mmc_data *data;
++
++ dma = container_of(req, struct atmel_mci_dma, req);
++ host = container_of(dma, struct atmel_mci, dma);
++ data = host->data;
++
++ /*
++ * This callback may be called before we see the CMDRDY
++ * interrupt under heavy irq load (possibly caused by other
++ * drivers) or when interrupts are disabled for a long time.
++ */
++ mci_set_dma_complete(host);
++ if (data->stop && mci_cmd_is_complete(host)
++ && !mci_set_stop_sent_is_completed(host))
++ send_stop_cmd(host->mmc, data, 0);
++
++ /*
++ * Regardless of what the documentation says, we have to wait
++ * for NOTBUSY even after block read operations.
++ *
++ * When the DMA transfer is complete, the controller may still
++ * be reading the CRC from the card, i.e. the data transfer is
++ * still in progress and we haven't seen all the potential
++ * error bits yet.
++ */
++ mci_writel(host, IER, MCI_BIT(NOTBUSY));
++}
++
++static void atmci_dma_error(struct dma_request *_req)
++{
++ struct dma_request_sg *req = to_dma_request_sg(_req);
++ struct atmel_mci_dma *dma;
++ struct atmel_mci *host;
++
++ dma = container_of(req, struct atmel_mci_dma, req);
++ host = container_of(dma, struct atmel_mci, dma);
++
++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS));
++
++ mci_set_dma_error_pending(host);
++ tasklet_schedule(&host->tasklet);
++}
++
++static irqreturn_t atmci_interrupt(int irq, void *dev_id)
++{
++ struct mmc_host *mmc = dev_id;
++ struct atmel_mci *host = mmc_priv(mmc);
++ u32 status, mask, pending;
++
++ spin_lock(&mmc->lock);
++
++ status = mci_readl(host, SR);
++ mask = mci_readl(host, IMR);
++ pending = status & mask;
++
++ do {
++ if (pending & MCI_DATA_ERROR_FLAGS) {
++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS));
++ host->data_status = status;
++ mci_set_data_error_pending(host);
++ tasklet_schedule(&host->tasklet);
++ break;
++ }
++ if (pending & MCI_BIT(CMDRDY))
++ atmci_cmd_interrupt(mmc, status);
++ if (pending & MCI_BIT(NOTBUSY)) {
++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS));
++ mci_set_data_pending(host);
++ tasklet_schedule(&host->tasklet);
++ }
++
++ status = mci_readl(host, SR);
++ mask = mci_readl(host, IMR);
++ pending = status & mask;
++ } while (pending);
++
++ spin_unlock(&mmc->lock);
++
++ return IRQ_HANDLED;
++}
++
++static irqreturn_t atmci_detect_change(int irq, void *dev_id)
++{
++ struct mmc_host *mmc = dev_id;
++ struct atmel_mci *host = mmc_priv(mmc);
++
++ int present = !gpio_get_value(irq_to_gpio(irq));
++
++ if (present != host->present) {
++ dev_dbg(&mmc->class_dev, "card %s\n",
++ present ? "inserted" : "removed");
++ host->present = present;
++ mci_set_card_detect_pending(host);
++ tasklet_schedule(&host->tasklet);
++ }
++ return IRQ_HANDLED;
++}
++
++static int __devinit atmci_probe(struct platform_device *pdev)
++{
++ struct mci_platform_data *board;
++ struct atmel_mci *host;
++ struct mmc_host *mmc;
++ struct resource *regs;
++ int irq;
++ int ret;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ board = pdev->dev.platform_data;
++
++ mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
++ if (!mmc)
++ return -ENOMEM;
++
++ host = mmc_priv(mmc);
++ host->pdev = pdev;
++ host->mmc = mmc;
++ if (board) {
++ host->detect_pin = board->detect_pin;
++ host->wp_pin = board->wp_pin;
++ } else {
++ host->detect_pin = -1;
++ host->detect_pin = -1;
++ }
++
++ host->mck = clk_get(&pdev->dev, "mci_clk");
++ if (IS_ERR(host->mck)) {
++ ret = PTR_ERR(host->mck);
++ goto out_free_host;
++ }
++ clk_enable(host->mck);
++
++ ret = -ENOMEM;
++ host->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!host->regs)
++ goto out_disable_clk;
++
++ host->bus_hz = clk_get_rate(host->mck);
++ host->mapbase = regs->start;
++
++ mmc->ops = &atmci_ops;
++ mmc->f_min = (host->bus_hz + 511) / 512;
++ mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
++ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
++ mmc->caps |= MMC_CAP_4_BIT_DATA;
++
++ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
++
++ ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
++ if (ret)
++ goto out_unmap;
++
++ /* Assume card is present if we don't have a detect pin */
++ host->present = 1;
++ if (host->detect_pin >= 0) {
++ if (gpio_request(host->detect_pin, "mmc_detect")) {
++ dev_dbg(&mmc->class_dev, "no detect pin available\n");
++ host->detect_pin = -1;
++ } else {
++ host->present = !gpio_get_value(host->detect_pin);
++ }
++ }
++ if (host->wp_pin >= 0) {
++ if (gpio_request(host->wp_pin, "mmc_wp")) {
++ dev_dbg(&mmc->class_dev, "no WP pin available\n");
++ host->wp_pin = -1;
++ }
++ }
++
++ /* TODO: Get this information from platform data */
++ ret = -ENOMEM;
++ host->dma.req.req.dmac = find_dma_controller(0);
++ if (!host->dma.req.req.dmac) {
++ dev_dbg(&mmc->class_dev, "no DMA controller available\n");
++ goto out_free_irq;
++ }
++ ret = dma_alloc_channel(host->dma.req.req.dmac);
++ if (ret < 0) {
++ dev_dbg(&mmc->class_dev, "unable to allocate DMA channel\n");
++ goto out_free_irq;
++ }
++ host->dma.req.req.channel = ret;
++ host->dma.req.width = DMA_WIDTH_32BIT;
++ host->dma.req.req.xfer_complete = atmci_xfer_complete;
++ host->dma.req.req.block_complete = NULL; // atmci_block_complete;
++ host->dma.req.req.error = atmci_dma_error;
++ host->dma.rx_periph_id = 0;
++ host->dma.tx_periph_id = 1;
++
++ mci_writel(host, CR, MCI_BIT(SWRST));
++ mci_writel(host, IDR, ~0UL);
++
++ platform_set_drvdata(pdev, host);
++
++ mmc_add_host(mmc);
++
++ if (host->detect_pin >= 0) {
++ ret = request_irq(gpio_to_irq(host->detect_pin),
++ atmci_detect_change,
++ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
++ DRIVER_NAME, mmc);
++ if (ret) {
++ dev_dbg(&mmc->class_dev,
++ "could not request IRQ %d for detect pin\n",
++ gpio_to_irq(host->detect_pin));
++ gpio_free(host->detect_pin);
++ host->detect_pin = -1;
++ }
++ }
++
++ dev_info(&mmc->class_dev, "Atmel MCI controller at 0x%08lx irq %d\n",
++ host->mapbase, irq);
++
++ atmci_init_debugfs(host);
++
++ return 0;
++
++out_free_irq:
++ if (host->detect_pin >= 0)
++ gpio_free(host->detect_pin);
++ if (host->wp_pin >= 0)
++ gpio_free(host->wp_pin);
++ free_irq(irq, mmc);
++out_unmap:
++ iounmap(host->regs);
++out_disable_clk:
++ clk_disable(host->mck);
++ clk_put(host->mck);
++out_free_host:
++ mmc_free_host(mmc);
++ return ret;
++}
++
++static int __devexit atmci_remove(struct platform_device *pdev)
++{
++ struct atmel_mci *host = platform_get_drvdata(pdev);
++
++ platform_set_drvdata(pdev, NULL);
++
++ if (host) {
++ atmci_cleanup_debugfs(host);
++
++ if (host->detect_pin >= 0) {
++ free_irq(gpio_to_irq(host->detect_pin), host->mmc);
++ cancel_delayed_work(&host->mmc->detect);
++ gpio_free(host->detect_pin);
++ }
++
++ mmc_remove_host(host->mmc);
++
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CR, MCI_BIT(MCIDIS));
++ mci_readl(host, SR);
++
++ dma_release_channel(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++
++ if (host->wp_pin >= 0)
++ gpio_free(host->wp_pin);
++
++ free_irq(platform_get_irq(pdev, 0), host->mmc);
++ iounmap(host->regs);
++
++ clk_disable(host->mck);
++ clk_put(host->mck);
++
++ mmc_free_host(host->mmc);
++ }
++ return 0;
++}
++
++static struct platform_driver atmci_driver = {
++ .probe = atmci_probe,
++ .remove = __devexit_p(atmci_remove),
++ .driver = {
++ .name = DRIVER_NAME,
++ },
++};
++
++static int __init atmci_init(void)
++{
++ return platform_driver_register(&atmci_driver);
++}
++
++static void __exit atmci_exit(void)
++{
++ platform_driver_unregister(&atmci_driver);
++}
++
++module_init(atmci_init);
++module_exit(atmci_exit);
++
++MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
++MODULE_LICENSE("GPL");
+diff -Nrup linux-2.6.24/drivers/mmc/host/atmel-mci.h linux-avr32/drivers/mmc/host/atmel-mci.h
+--- linux-2.6.24/drivers/mmc/host/atmel-mci.h 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/drivers/mmc/host/atmel-mci.h 2008-02-01 14:51:39.000000000 -0500
+@@ -0,0 +1,192 @@
++/*
++ * Atmel MultiMedia Card Interface driver
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
++#define __DRIVERS_MMC_ATMEL_MCI_H__
++
++/* MCI register offsets */
++#define MCI_CR 0x0000
++#define MCI_MR 0x0004
++#define MCI_DTOR 0x0008
++#define MCI_SDCR 0x000c
++#define MCI_ARGR 0x0010
++#define MCI_CMDR 0x0014
++#define MCI_BLKR 0x0018
++#define MCI_RSPR 0x0020
++#define MCI_RSPR1 0x0024
++#define MCI_RSPR2 0x0028
++#define MCI_RSPR3 0x002c
++#define MCI_RDR 0x0030
++#define MCI_TDR 0x0034
++#define MCI_SR 0x0040
++#define MCI_IER 0x0044
++#define MCI_IDR 0x0048
++#define MCI_IMR 0x004c
++
++/* Bitfields in CR */
++#define MCI_MCIEN_OFFSET 0
++#define MCI_MCIEN_SIZE 1
++#define MCI_MCIDIS_OFFSET 1
++#define MCI_MCIDIS_SIZE 1
++#define MCI_PWSEN_OFFSET 2
++#define MCI_PWSEN_SIZE 1
++#define MCI_PWSDIS_OFFSET 3
++#define MCI_PWSDIS_SIZE 1
++#define MCI_SWRST_OFFSET 7
++#define MCI_SWRST_SIZE 1
++
++/* Bitfields in MR */
++#define MCI_CLKDIV_OFFSET 0
++#define MCI_CLKDIV_SIZE 8
++#define MCI_PWSDIV_OFFSET 8
++#define MCI_PWSDIV_SIZE 3
++#define MCI_RDPROOF_OFFSET 11
++#define MCI_RDPROOF_SIZE 1
++#define MCI_WRPROOF_OFFSET 12
++#define MCI_WRPROOF_SIZE 1
++#define MCI_DMAPADV_OFFSET 14
++#define MCI_DMAPADV_SIZE 1
++#define MCI_BLKLEN_OFFSET 16
++#define MCI_BLKLEN_SIZE 16
++
++/* Bitfields in DTOR */
++#define MCI_DTOCYC_OFFSET 0
++#define MCI_DTOCYC_SIZE 4
++#define MCI_DTOMUL_OFFSET 4
++#define MCI_DTOMUL_SIZE 3
++
++/* Bitfields in SDCR */
++#define MCI_SDCSEL_OFFSET 0
++#define MCI_SDCSEL_SIZE 4
++#define MCI_SDCBUS_OFFSET 7
++#define MCI_SDCBUS_SIZE 1
++
++/* Bitfields in ARGR */
++#define MCI_ARG_OFFSET 0
++#define MCI_ARG_SIZE 32
++
++/* Bitfields in CMDR */
++#define MCI_CMDNB_OFFSET 0
++#define MCI_CMDNB_SIZE 6
++#define MCI_RSPTYP_OFFSET 6
++#define MCI_RSPTYP_SIZE 2
++#define MCI_SPCMD_OFFSET 8
++#define MCI_SPCMD_SIZE 3
++#define MCI_OPDCMD_OFFSET 11
++#define MCI_OPDCMD_SIZE 1
++#define MCI_MAXLAT_OFFSET 12
++#define MCI_MAXLAT_SIZE 1
++#define MCI_TRCMD_OFFSET 16
++#define MCI_TRCMD_SIZE 2
++#define MCI_TRDIR_OFFSET 18
++#define MCI_TRDIR_SIZE 1
++#define MCI_TRTYP_OFFSET 19
++#define MCI_TRTYP_SIZE 2
++
++/* Bitfields in BLKR */
++#define MCI_BCNT_OFFSET 0
++#define MCI_BCNT_SIZE 16
++
++/* Bitfields in RSPRn */
++#define MCI_RSP_OFFSET 0
++#define MCI_RSP_SIZE 32
++
++/* Bitfields in SR/IER/IDR/IMR */
++#define MCI_CMDRDY_OFFSET 0
++#define MCI_CMDRDY_SIZE 1
++#define MCI_RXRDY_OFFSET 1
++#define MCI_RXRDY_SIZE 1
++#define MCI_TXRDY_OFFSET 2
++#define MCI_TXRDY_SIZE 1
++#define MCI_BLKE_OFFSET 3
++#define MCI_BLKE_SIZE 1
++#define MCI_DTIP_OFFSET 4
++#define MCI_DTIP_SIZE 1
++#define MCI_NOTBUSY_OFFSET 5
++#define MCI_NOTBUSY_SIZE 1
++#define MCI_ENDRX_OFFSET 6
++#define MCI_ENDRX_SIZE 1
++#define MCI_ENDTX_OFFSET 7
++#define MCI_ENDTX_SIZE 1
++#define MCI_RXBUFF_OFFSET 14
++#define MCI_RXBUFF_SIZE 1
++#define MCI_TXBUFE_OFFSET 15
++#define MCI_TXBUFE_SIZE 1
++#define MCI_RINDE_OFFSET 16
++#define MCI_RINDE_SIZE 1
++#define MCI_RDIRE_OFFSET 17
++#define MCI_RDIRE_SIZE 1
++#define MCI_RCRCE_OFFSET 18
++#define MCI_RCRCE_SIZE 1
++#define MCI_RENDE_OFFSET 19
++#define MCI_RENDE_SIZE 1
++#define MCI_RTOE_OFFSET 20
++#define MCI_RTOE_SIZE 1
++#define MCI_DCRCE_OFFSET 21
++#define MCI_DCRCE_SIZE 1
++#define MCI_DTOE_OFFSET 22
++#define MCI_DTOE_SIZE 1
++#define MCI_OVRE_OFFSET 30
++#define MCI_OVRE_SIZE 1
++#define MCI_UNRE_OFFSET 31
++#define MCI_UNRE_SIZE 1
++
++/* Constants for DTOMUL */
++#define MCI_DTOMUL_1_CYCLE 0
++#define MCI_DTOMUL_16_CYCLES 1
++#define MCI_DTOMUL_128_CYCLES 2
++#define MCI_DTOMUL_256_CYCLES 3
++#define MCI_DTOMUL_1024_CYCLES 4
++#define MCI_DTOMUL_4096_CYCLES 5
++#define MCI_DTOMUL_65536_CYCLES 6
++#define MCI_DTOMUL_1048576_CYCLES 7
++
++/* Constants for RSPTYP */
++#define MCI_RSPTYP_NO_RESP 0
++#define MCI_RSPTYP_48_BIT 1
++#define MCI_RSPTYP_136_BIT 2
++
++/* Constants for SPCMD */
++#define MCI_SPCMD_NO_SPEC_CMD 0
++#define MCI_SPCMD_INIT_CMD 1
++#define MCI_SPCMD_SYNC_CMD 2
++#define MCI_SPCMD_INT_CMD 4
++#define MCI_SPCMD_INT_RESP 5
++
++/* Constants for TRCMD */
++#define MCI_TRCMD_NO_TRANS 0
++#define MCI_TRCMD_START_TRANS 1
++#define MCI_TRCMD_STOP_TRANS 2
++
++/* Constants for TRTYP */
++#define MCI_TRTYP_BLOCK 0
++#define MCI_TRTYP_MULTI_BLOCK 1
++#define MCI_TRTYP_STREAM 2
++
++/* Bit manipulation macros */
++#define MCI_BIT(name) \
++ (1 << MCI_##name##_OFFSET)
++#define MCI_BF(name,value) \
++ (((value) & ((1 << MCI_##name##_SIZE) - 1)) \
++ << MCI_##name##_OFFSET)
++#define MCI_BFEXT(name,value) \
++ (((value) >> MCI_##name##_OFFSET) \
++ & ((1 << MCI_##name##_SIZE) - 1))
++#define MCI_BFINS(name,value,old) \
++ (((old) & ~(((1 << MCI_##name##_SIZE) - 1) \
++ << MCI_##name##_OFFSET)) \
++ | MCI_BF(name,value))
++
++/* Register access macros */
++#define mci_readl(port,reg) \
++ __raw_readl((port)->regs + MCI_##reg)
++#define mci_writel(port,reg,value) \
++ __raw_writel((value), (port)->regs + MCI_##reg)
++
++#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
+diff -Nrup linux-2.6.24/drivers/mmc/host/Kconfig linux-avr32/drivers/mmc/host/Kconfig
+--- linux-2.6.24/drivers/mmc/host/Kconfig 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/mmc/host/Kconfig 2008-02-01 14:51:39.000000000 -0500
+@@ -91,6 +91,16 @@ config MMC_AT91
+
+ If unsure, say N.
+
++config MMC_ATMELMCI
++ tristate "Atmel Multimedia Card Interface support"
++ depends on AVR32 && MMC
++ help
++ This selects the Atmel Multimedia Card Interface. If you have
++ a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
++ slot, say Y or M here.
++
++ If unsure, say N.
++
+ config MMC_IMX
+ tristate "Motorola i.MX Multimedia Card Interface support"
+ depends on ARCH_IMX
+diff -Nrup linux-2.6.24/drivers/mmc/host/Makefile linux-avr32/drivers/mmc/host/Makefile
+--- linux-2.6.24/drivers/mmc/host/Makefile 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/mmc/host/Makefile 2008-02-01 14:51:39.000000000 -0500
+@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o
+ obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP) += omap.o
+ obj-$(CONFIG_MMC_AT91) += at91_mci.o
++obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
+ obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
+ obj-$(CONFIG_MMC_SPI) += mmc_spi.o
+
+diff -Nrup linux-2.6.24/drivers/mtd/chips/cfi_cmdset_0001.c linux-avr32/drivers/mtd/chips/cfi_cmdset_0001.c
+--- linux-2.6.24/drivers/mtd/chips/cfi_cmdset_0001.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/mtd/chips/cfi_cmdset_0001.c 2008-02-01 14:51:39.000000000 -0500
+@@ -50,6 +50,7 @@
+ #define I82802AC 0x00ac
+ #define MANUFACTURER_ST 0x0020
+ #define M50LPW080 0x002F
++#define AT49BV640D 0x02de
+
+ static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+@@ -157,6 +158,47 @@ static void cfi_tell_features(struct cfi
+ }
+ #endif
+
++/* Atmel chips don't use the same PRI format as Intel chips */
++static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
++{
++ struct map_info *map = mtd->priv;
++ struct cfi_private *cfi = map->fldrv_priv;
++ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
++ struct cfi_pri_atmel atmel_pri;
++ uint32_t features = 0;
++
++ /* Reverse byteswapping */
++ extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
++ extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
++ extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
++
++ memcpy(&atmel_pri, extp, sizeof(atmel_pri));
++ memset((char *)extp + 5, 0, sizeof(*extp) - 5);
++
++ printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
++
++ if (atmel_pri.Features & 0x01) /* chip erase supported */
++ features |= (1<<0);
++ if (atmel_pri.Features & 0x02) /* erase suspend supported */
++ features |= (1<<1);
++ if (atmel_pri.Features & 0x04) /* program suspend supported */
++ features |= (1<<2);
++ if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
++ features |= (1<<9);
++ if (atmel_pri.Features & 0x20) /* page mode read supported */
++ features |= (1<<7);
++ if (atmel_pri.Features & 0x40) /* queued erase supported */
++ features |= (1<<4);
++ if (atmel_pri.Features & 0x80) /* Protection bits supported */
++ features |= (1<<6);
++
++ extp->FeatureSupport = features;
++
++ /* burst write mode not supported */
++ cfi->cfiq->BufWriteTimeoutTyp = 0;
++ cfi->cfiq->BufWriteTimeoutMax = 0;
++}
++
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
+ static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
+@@ -234,6 +276,7 @@ static void fixup_use_powerup_lock(struc
+ }
+
+ static struct cfi_fixup cfi_fixup_table[] = {
++ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ { CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
+ #endif
+diff -Nrup linux-2.6.24/drivers/mtd/chips/cfi_cmdset_0002.c linux-avr32/drivers/mtd/chips/cfi_cmdset_0002.c
+--- linux-2.6.24/drivers/mtd/chips/cfi_cmdset_0002.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/mtd/chips/cfi_cmdset_0002.c 2008-02-01 14:51:39.000000000 -0500
+@@ -185,6 +185,10 @@ static void fixup_convert_atmel_pri(stru
+ extp->TopBottom = 2;
+ else
+ extp->TopBottom = 3;
++
++ /* burst write mode not supported */
++ cfi->cfiq->BufWriteTimeoutTyp = 0;
++ cfi->cfiq->BufWriteTimeoutMax = 0;
+ }
+
+ static void fixup_use_secsi(struct mtd_info *mtd, void *param)
+@@ -217,6 +221,7 @@ static void fixup_use_atmel_lock(struct
+ }
+
+ static struct cfi_fixup cfi_fixup_table[] = {
++ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef AMD_BOOTLOC_BUG
+ { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
+ #endif
+@@ -229,7 +234,6 @@ static struct cfi_fixup cfi_fixup_table[
+ #if !FORCE_WORD_WRITE
+ { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
+ #endif
+- { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ { 0, 0, NULL, NULL }
+ };
+ static struct cfi_fixup jedec_fixup_table[] = {
+diff -Nrup linux-2.6.24/drivers/pcmcia/at32_cf.c linux-avr32/drivers/pcmcia/at32_cf.c
+--- linux-2.6.24/drivers/pcmcia/at32_cf.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/drivers/pcmcia/at32_cf.c 2008-02-01 14:51:42.000000000 -0500
+@@ -0,0 +1,533 @@
++/*
++ * Driver for AVR32 Static Memory Controller: CompactFlash support
++ *
++ * Copyright (C) 2006 Atmel Norway
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++ * 02111-1307, USA.
++ *
++ * The full GNU General Public License is included in this
++ * distribution in the file called COPYING.
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++#include <linux/dma-mapping.h>
++
++#include <pcmcia/ss.h>
++
++#include <asm/gpio.h>
++#include <asm/io.h>
++#include <asm/arch/board.h>
++
++#include <asm/arch/smc.h>
++
++struct at32_cf_socket {
++ struct pcmcia_socket socket;
++ int detect_pin;
++ int reset_pin;
++ int vcc_pin;
++ int ready_pin;
++ struct resource res_attr;
++ struct resource res_mem;
++ struct resource res_io;
++ struct smc_config smc;
++ unsigned int irq;
++ unsigned int cf_cs;
++ socket_state_t state;
++ unsigned present:1;
++};
++#define to_at32_cf(sock) container_of(sock, struct at32_cf_socket, socket)
++
++/*
++ * We have the following memory layout relative to the base address:
++ *
++ * Alt IDE Mode: 00e0 0000 -> 00ff ffff
++ * True IDE Mode: 00c0 0000 -> 00df ffff
++ * I/O memory: 0080 0000 -> 00bf ffff
++ * Common memory: 0040 0000 -> 007f ffff
++ * Attribute memory: 0000 0000 -> 003f ffff
++ */
++#define CF_ATTR_OFFSET 0x00000000
++#define CF_MEM_OFFSET 0x00400000
++#define CF_IO_OFFSET 0x00800000
++#define CF_RES_SIZE 4096
++
++#ifdef DEBUG
++
++static int pc_debug;
++module_param(pc_debug, int, 0644);
++
++static void at32_cf_debug(struct at32_cf_socket *cf, const char *func,
++ int level, const char *fmt, ...)
++{
++ va_list args;
++
++ if (pc_debug > level) {
++ printk(KERN_DEBUG "at32_cf/%u: %s: ", cf->cf_cs, func);
++ va_start(args, fmt);
++ vprintk(fmt, args);
++ va_end(args);
++ }
++}
++
++#define debug(cf, lvl, fmt, arg...) \
++ at32_cf_debug(cf, __func__, lvl, fmt, ##arg)
++
++#else
++#define debug(cf, lvl, fmt, arg...) do { } while (0)
++#endif
++
++static inline int at32_cf_present(struct at32_cf_socket *cf)
++{
++ int present = 1;
++
++ /* If we don't have a detect pin, assume the card is present */
++ if (cf->detect_pin >= 0)
++ present = !gpio_get_value(cf->detect_pin);
++
++ return present;
++}
++
++static irqreturn_t at32_cf_irq(int irq, void *dev_id)
++{
++ struct at32_cf_socket *cf = dev_id;
++ unsigned int present;
++
++ present = at32_cf_present(cf);
++ if (present != cf->present) {
++ cf->present = present;
++ debug(cf, 3, "card %s\n", present ? "present" : "gone");
++ pcmcia_parse_events(&cf->socket, SS_DETECT);
++ }
++
++ return IRQ_HANDLED;
++}
++
++static int at32_cf_get_status(struct pcmcia_socket *sock, u_int *value)
++{
++ struct at32_cf_socket *cf;
++ u_int status = 0;
++
++ cf = container_of(sock, struct at32_cf_socket, socket);
++
++ if (at32_cf_present(cf)) {
++ /* NOTE: gpio on AP7xxx is 3.3V */
++ status = SS_DETECT | SS_3VCARD;
++ if (cf->ready_pin < 0 || gpio_get_value(cf->ready_pin))
++ status |= SS_READY;
++ if (cf->vcc_pin < 0 || gpio_get_value(cf->vcc_pin))
++ status |= SS_POWERON;
++ }
++
++ *value = status;
++ return 0;
++}
++
++static int at32_cf_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
++{
++ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
++
++ debug(cf, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n",
++ (state->csc_mask==0)?"<NONE> ":"",
++ (state->csc_mask&SS_DETECT)?"DETECT ":"",
++ (state->csc_mask&SS_READY)?"READY ":"",
++ (state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
++ (state->csc_mask&SS_BATWARN)?"BATWARN ":"",
++ (state->csc_mask&SS_STSCHG)?"STSCHG ":"",
++ (state->flags==0)?"<NONE> ":"",
++ (state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
++ (state->flags&SS_IOCARD)?"IOCARD ":"",
++ (state->flags&SS_RESET)?"RESET ":"",
++ (state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
++ (state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
++ state->Vcc, state->Vpp, state->io_irq);
++
++ /*
++ * TODO: Allow boards to override this in case they have level
++ * converters.
++ */
++ switch (state->Vcc) {
++ case 0:
++ if (cf->vcc_pin >= 0)
++ gpio_set_value(cf->vcc_pin, 0);
++ break;
++ case 33:
++ if (cf->vcc_pin >= 0)
++ gpio_set_value(cf->vcc_pin, 1);
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ if (cf->reset_pin >= 0)
++ gpio_set_value(cf->reset_pin, state->flags & SS_RESET);
++
++ cf->state = *state;
++
++ return 0;
++}
++
++static int at32_cf_socket_init(struct pcmcia_socket *sock)
++{
++ debug(to_at32_cf(sock), 2, "called\n");
++
++ return 0;
++}
++
++static int at32_cf_suspend(struct pcmcia_socket *sock)
++{
++ debug(to_at32_cf(sock), 2, "called\n");
++
++ at32_cf_set_socket(sock, &dead_socket);
++
++ return 0;
++}
++
++static int at32_cf_set_io_map(struct pcmcia_socket *sock,
++ struct pccard_io_map *map)
++{
++ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
++ int retval;
++
++ debug(cf, 2, "map %u speed %u start 0x%08x stop 0x%08x\n",
++ map->map, map->speed, map->start, map->stop);
++ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
++ (map->flags == 0) ? "<NONE>":"",
++ (map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
++ (map->flags & MAP_16BIT) ? "16BIT " : "",
++ (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
++ (map->flags & MAP_0WS) ? "0WS " : "",
++ (map->flags & MAP_WRPROT) ? "WRPROT " : "",
++ (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
++ (map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
++
++ map->flags &= MAP_ACTIVE | MAP_16BIT | MAP_USE_WAIT;
++
++ if (map->flags & MAP_16BIT)
++ cf->smc.bus_width = 2;
++ else
++ cf->smc.bus_width = 1;
++
++ if (map->flags & MAP_USE_WAIT)
++ cf->smc.nwait_mode = 3;
++ else
++ cf->smc.nwait_mode = 0;
++
++ retval = smc_set_configuration(cf->cf_cs, &cf->smc);
++ if (retval) {
++ printk(KERN_ERR "at32_cf: could not set up SMC for I/O\n");
++ return retval;
++ }
++
++ map->start = cf->socket.io_offset;
++ map->stop = map->start + CF_RES_SIZE - 1;
++
++ return 0;
++}
++
++static int
++at32_cf_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
++{
++ struct at32_cf_socket *cf;
++ struct resource *res;
++ int retval;
++
++ cf = container_of(sock, struct at32_cf_socket, socket);
++
++ debug(cf, 2, "map %u speed %u card_start %08x\n",
++ map->map, map->speed, map->card_start);
++ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
++ (map->flags==0)?"<NONE>":"",
++ (map->flags&MAP_ACTIVE)?"ACTIVE ":"",
++ (map->flags&MAP_16BIT)?"16BIT ":"",
++ (map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
++ (map->flags&MAP_0WS)?"0WS ":"",
++ (map->flags&MAP_WRPROT)?"WRPROT ":"",
++ (map->flags&MAP_ATTRIB)?"ATTRIB ":"",
++ (map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
++
++ if (map->card_start)
++ return -EINVAL;
++
++ map->flags &= MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT | MAP_USE_WAIT;
++
++ if (map->flags & MAP_ATTRIB) {
++ res = &cf->res_attr;
++
++ /* Linksys WCF12 seems to use WAIT when reading CIS */
++ map->flags |= MAP_USE_WAIT;
++ } else {
++ res = &cf->res_mem;
++ }
++
++ if (map->flags & MAP_USE_WAIT)
++ cf->smc.nwait_mode = 3;
++ else
++ cf->smc.nwait_mode = 0;
++
++ retval = smc_set_configuration(cf->cf_cs, &cf->smc);
++ if (retval) {
++ printk(KERN_ERR "at32_cf: could not set up SMC for mem\n");
++ return retval;
++ }
++
++ map->static_start = res->start;
++
++ return 0;
++}
++
++static struct pccard_operations at32_cf_ops = {
++ .init = at32_cf_socket_init,
++ .suspend = at32_cf_suspend,
++ .get_status = at32_cf_get_status,
++ .set_socket = at32_cf_set_socket,
++ .set_io_map = at32_cf_set_io_map,
++ .set_mem_map = at32_cf_set_mem_map,
++};
++
++static int __init request_pin(struct platform_device *pdev,
++ unsigned int pin, const char *name)
++{
++ if (gpio_request(pin, name)) {
++ dev_warn(&pdev->dev, "failed to request %s pin\n", name);
++ return -1;
++ }
++
++ return pin;
++}
++
++static struct smc_timing at32_cf_timing __initdata = {
++ .ncs_read_setup = 30,
++ .nrd_setup = 100,
++ .ncs_write_setup = 30,
++ .nwe_setup = 100,
++
++ .ncs_read_pulse = 360,
++ .nrd_pulse = 290,
++ .ncs_write_pulse = 360,
++ .nwe_pulse = 290,
++
++ .read_cycle = 420,
++ .write_cycle = 420,
++};
++
++static int __init at32_cf_probe(struct platform_device *pdev)
++{
++ struct at32_cf_socket *cf;
++ struct cf_platform_data *board = pdev->dev.platform_data;
++ struct resource *res_skt;
++ int irq;
++ int ret;
++
++ dev_dbg(&pdev->dev, "probe");
++
++ if (!board)
++ return -ENXIO;
++
++ res_skt = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res_skt)
++ return -ENXIO;
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ cf = kzalloc(sizeof(struct at32_cf_socket), GFP_KERNEL);
++ if (!cf)
++ return -ENOMEM;
++
++ cf->detect_pin = -1;
++ cf->reset_pin = -1;
++ cf->vcc_pin = -1;
++ cf->ready_pin = -1;
++ cf->cf_cs = board->cs;
++
++ if (board->detect_pin != GPIO_PIN_NONE)
++ cf->detect_pin = request_pin(pdev, board->detect_pin,
++ "cf_detect");
++ if (board->reset_pin != GPIO_PIN_NONE)
++ cf->reset_pin = request_pin(pdev, board->reset_pin,
++ "cf_reset");
++ if (board->vcc_pin != GPIO_PIN_NONE)
++ cf->vcc_pin = request_pin(pdev, board->vcc_pin,
++ "cf_vcc");
++ if (board->ready_pin != GPIO_PIN_NONE)
++ /* READY is also used for irq through EIM */
++ cf->ready_pin = board->ready_pin;
++
++ debug(cf, 2, "pins: detect=%d reset=%d vcc=%d\n",
++ cf->detect_pin, cf->reset_pin, cf->vcc_pin);
++
++ cf->socket.pci_irq = irq;
++ cf->socket.ops = &at32_cf_ops;
++ cf->socket.resource_ops = &pccard_static_ops;
++ cf->socket.dev.parent = &pdev->dev;
++ cf->socket.owner = THIS_MODULE;
++ cf->socket.features =
++ SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
++ cf->socket.map_size = CF_RES_SIZE;
++
++ cf->res_attr.start = res_skt->start + CF_ATTR_OFFSET;
++ cf->res_attr.end = cf->res_attr.start + CF_RES_SIZE - 1;
++ cf->res_attr.name = "attribute";
++ cf->res_attr.flags = IORESOURCE_MEM;
++ ret = request_resource(res_skt, &cf->res_attr);
++ if (ret)
++ goto err_request_res_attr;
++
++ cf->res_mem.start = res_skt->start + CF_MEM_OFFSET;
++ cf->res_mem.end = cf->res_mem.start + CF_RES_SIZE - 1;
++ cf->res_mem.name = "memory";
++ cf->res_mem.flags = IORESOURCE_MEM;
++ ret = request_resource(res_skt, &cf->res_mem);
++ if (ret)
++ goto err_request_res_mem;
++
++ cf->res_io.start = res_skt->start + CF_IO_OFFSET;
++ cf->res_io.end = cf->res_io.start + CF_RES_SIZE - 1;
++ cf->res_io.name = "io";
++ cf->res_io.flags = IORESOURCE_MEM;
++ ret = request_resource(res_skt, &cf->res_io);
++ if (ret)
++ goto err_request_res_io;
++
++ cf->socket.io_offset = cf->res_io.start;
++
++ if (cf->detect_pin >= 0) {
++ ret = request_irq(gpio_to_irq(cf->detect_pin), at32_cf_irq,
++ IRQF_SHARED, "cf_detect", cf);
++ if (ret) {
++ debug(cf, 1,
++ "failed to request cf_detect interrupt\n");
++ goto err_detect_irq;
++ }
++ }
++
++ cf->present = at32_cf_present(cf);
++
++ /* Setup SMC timings */
++ smc_set_timing(&cf->smc, &at32_cf_timing);
++
++ cf->smc.bus_width = 2;
++ cf->smc.nrd_controlled = 1;
++ cf->smc.nwe_controlled = 1;
++ cf->smc.nwait_mode = 0;
++ cf->smc.byte_write = 0;
++ cf->smc.tdf_cycles = 8;
++ cf->smc.tdf_mode = 0;
++
++ ret = smc_set_configuration(cf->cf_cs, &cf->smc);
++ if (ret) {
++ debug(cf, 1, "failed to configure SMC\n", ret);
++ goto err_smc;
++ }
++
++ ret = pcmcia_register_socket(&cf->socket);
++ if (ret) {
++ debug(cf, 1, "failed to register socket: %d\n", ret);
++ goto err_register_socket;
++ }
++
++ if (cf->reset_pin >= 0)
++ gpio_direction_output(cf->reset_pin, 0);
++
++ platform_set_drvdata(pdev, cf);
++
++ dev_info(&pdev->dev, "Atmel SMC CF interface at 0x%08lx\n",
++ (unsigned long)res_skt->start);
++
++ return 0;
++
++err_register_socket:
++err_smc:
++ if (cf->detect_pin >= 0)
++ free_irq(gpio_to_irq(cf->detect_pin), cf);
++err_detect_irq:
++ release_resource(&cf->res_io);
++err_request_res_io:
++ release_resource(&cf->res_mem);
++err_request_res_mem:
++ release_resource(&cf->res_attr);
++err_request_res_attr:
++ if (cf->vcc_pin >= 0)
++ gpio_free(cf->vcc_pin);
++ if (cf->reset_pin >= 0)
++ gpio_free(cf->reset_pin);
++ if (cf->detect_pin >= 0)
++ gpio_free(cf->detect_pin);
++ kfree(cf);
++
++ return ret;
++}
++
++static int __exit at32_cf_remove(struct platform_device *pdev)
++{
++ struct at32_cf_socket *cf = platform_get_drvdata(pdev);
++
++ pcmcia_unregister_socket(&cf->socket);
++ if (cf->detect_pin >= 0) {
++ free_irq(gpio_to_irq(cf->detect_pin), cf);
++ gpio_free(cf->detect_pin);
++ }
++ if (cf->vcc_pin >= 0)
++ gpio_free(cf->vcc_pin);
++ if (cf->reset_pin >= 0)
++ gpio_free(cf->reset_pin);
++
++ release_resource(&cf->res_io);
++ release_resource(&cf->res_mem);
++ release_resource(&cf->res_attr);
++ kfree(cf);
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++
++static struct platform_driver at32_cf_driver = {
++ .remove = __exit_p(at32_cf_remove),
++ .driver = {
++ .name = "at32_cf",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init at32_cf_init(void)
++{
++ int ret;
++
++ ret = platform_driver_probe(&at32_cf_driver, at32_cf_probe);
++ if (ret)
++ printk(KERN_ERR "at32_cf: probe failed: %d\n", ret);
++ return ret;
++}
++
++static void __exit at32_cf_exit(void)
++{
++ platform_driver_unregister(&at32_cf_driver);
++}
++
++module_init(at32_cf_init);
++module_exit(at32_cf_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Driver for SMC PCMCIA interface");
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+diff -Nrup linux-2.6.24/drivers/pcmcia/Kconfig linux-avr32/drivers/pcmcia/Kconfig
+--- linux-2.6.24/drivers/pcmcia/Kconfig 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/pcmcia/Kconfig 2008-02-01 14:51:42.000000000 -0500
+@@ -276,6 +276,13 @@ config ELECTRA_CF
+ Say Y here to support the CompactFlash controller on the
+ PA Semi Electra eval board.
+
++config AT32_CF
++ tristate "AT32AP CompactFlash Controller"
++ depends on PCMCIA && AVR32 && PLATFORM_AT32AP
++ help
++ Say Y here to support the CompactFlash controller on AT32 chips.
++ Or choose M to compile the driver as a module named "at32_cf".
++
+ config PCCARD_NONSTATIC
+ tristate
+
+diff -Nrup linux-2.6.24/drivers/pcmcia/Makefile linux-avr32/drivers/pcmcia/Makefile
+--- linux-2.6.24/drivers/pcmcia/Makefile 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/pcmcia/Makefile 2008-02-01 14:51:42.000000000 -0500
+@@ -38,6 +38,7 @@ obj-$(CONFIG_PCMCIA_VRC4173) += vrc417
+ obj-$(CONFIG_OMAP_CF) += omap_cf.o
+ obj-$(CONFIG_AT91_CF) += at91_cf.o
+ obj-$(CONFIG_ELECTRA_CF) += electra_cf.o
++obj-$(CONFIG_AT32_CF) += at32_cf.o
+
+ sa11xx_core-y += soc_common.o sa11xx_base.o
+ pxa2xx_core-y += soc_common.o pxa2xx_base.o
+diff -Nrup linux-2.6.24/drivers/spi/atmel_spi.c linux-avr32/drivers/spi/atmel_spi.c
+--- linux-2.6.24/drivers/spi/atmel_spi.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/spi/atmel_spi.c 2008-02-01 14:51:43.000000000 -0500
+@@ -51,7 +51,9 @@ struct atmel_spi {
+ u8 stopping;
+ struct list_head queue;
+ struct spi_transfer *current_transfer;
+- unsigned long remaining_bytes;
++ unsigned long current_remaining_bytes;
++ struct spi_transfer *next_transfer;
++ unsigned long next_remaining_bytes;
+
+ void *buffer;
+ dma_addr_t buffer_dma;
+@@ -121,6 +123,48 @@ static void cs_deactivate(struct atmel_s
+ gpio_set_value(gpio, !active);
+ }
+
++static inline int atmel_spi_xfer_is_last(struct spi_message *msg,
++ struct spi_transfer *xfer)
++{
++ return msg->transfers.prev == &xfer->transfer_list;
++}
++
++static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer)
++{
++ return xfer->delay_usecs == 0 && !xfer->cs_change;
++}
++
++static void atmel_spi_next_xfer_data(struct spi_master *master,
++ struct spi_transfer *xfer,
++ dma_addr_t *tx_dma,
++ dma_addr_t *rx_dma,
++ u32 *plen)
++{
++ struct atmel_spi *as = spi_master_get_devdata(master);
++ u32 len = *plen;
++
++ /* use scratch buffer only when rx or tx data is unspecified */
++ if (xfer->rx_buf)
++ *rx_dma = xfer->rx_dma + xfer->len - len;
++ else {
++ *rx_dma = as->buffer_dma;
++ if (len > BUFFER_SIZE)
++ len = BUFFER_SIZE;
++ }
++ if (xfer->tx_buf)
++ *tx_dma = xfer->tx_dma + xfer->len - len;
++ else {
++ *tx_dma = as->buffer_dma;
++ if (len > BUFFER_SIZE)
++ len = BUFFER_SIZE;
++ memset(as->buffer, 0, len);
++ dma_sync_single_for_device(&as->pdev->dev,
++ as->buffer_dma, len, DMA_TO_DEVICE);
++ }
++
++ *plen = len;
++}
++
+ /*
+ * Submit next transfer for DMA.
+ * lock is held, spi irq is blocked
+@@ -130,53 +174,78 @@ static void atmel_spi_next_xfer(struct s
+ {
+ struct atmel_spi *as = spi_master_get_devdata(master);
+ struct spi_transfer *xfer;
+- u32 len;
++ u32 len, remaining, total;
+ dma_addr_t tx_dma, rx_dma;
+
+- xfer = as->current_transfer;
+- if (!xfer || as->remaining_bytes == 0) {
+- if (xfer)
+- xfer = list_entry(xfer->transfer_list.next,
+- struct spi_transfer, transfer_list);
+- else
+- xfer = list_entry(msg->transfers.next,
+- struct spi_transfer, transfer_list);
+- as->remaining_bytes = xfer->len;
+- as->current_transfer = xfer;
++ if (!as->current_transfer)
++ xfer = list_entry(msg->transfers.next,
++ struct spi_transfer, transfer_list);
++ else if (!as->next_transfer)
++ xfer = list_entry(as->current_transfer->transfer_list.next,
++ struct spi_transfer, transfer_list);
++ else
++ xfer = NULL;
++
++ if (xfer) {
++ len = xfer->len;
++ atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
++ remaining = xfer->len - len;
++
++ spi_writel(as, RPR, rx_dma);
++ spi_writel(as, TPR, tx_dma);
++
++ if (msg->spi->bits_per_word > 8)
++ len >>= 1;
++ spi_writel(as, RCR, len);
++ spi_writel(as, TCR, len);
++
++ dev_dbg(&msg->spi->dev,
++ " start xfer %p: len %u tx %p/%08x rx %p/%08x\n",
++ xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
++ xfer->rx_buf, xfer->rx_dma);
++ } else {
++ xfer = as->next_transfer;
++ remaining = as->next_remaining_bytes;
+ }
+
+- len = as->remaining_bytes;
++ as->current_transfer = xfer;
++ as->current_remaining_bytes = remaining;
+
+- tx_dma = xfer->tx_dma + xfer->len - len;
+- rx_dma = xfer->rx_dma + xfer->len - len;
++ if (remaining > 0)
++ len = remaining;
++ else if (!atmel_spi_xfer_is_last(msg, xfer)
++ && atmel_spi_xfer_can_be_chained(xfer)) {
++ xfer = list_entry(xfer->transfer_list.next,
++ struct spi_transfer, transfer_list);
++ len = xfer->len;
++ } else
++ xfer = NULL;
+
+- /* use scratch buffer only when rx or tx data is unspecified */
+- if (!xfer->rx_buf) {
+- rx_dma = as->buffer_dma;
+- if (len > BUFFER_SIZE)
+- len = BUFFER_SIZE;
+- }
+- if (!xfer->tx_buf) {
+- tx_dma = as->buffer_dma;
+- if (len > BUFFER_SIZE)
+- len = BUFFER_SIZE;
+- memset(as->buffer, 0, len);
+- dma_sync_single_for_device(&as->pdev->dev,
+- as->buffer_dma, len, DMA_TO_DEVICE);
+- }
++ as->next_transfer = xfer;
+
+- spi_writel(as, RPR, rx_dma);
+- spi_writel(as, TPR, tx_dma);
++ if (xfer) {
++ total = len;
++ atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
++ as->next_remaining_bytes = total - len;
++
++ spi_writel(as, RNPR, rx_dma);
++ spi_writel(as, TNPR, tx_dma);
++
++ if (msg->spi->bits_per_word > 8)
++ len >>= 1;
++ spi_writel(as, RNCR, len);
++ spi_writel(as, TNCR, len);
++
++ dev_dbg(&msg->spi->dev,
++ " next xfer %p: len %u tx %p/%08x rx %p/%08x\n",
++ xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
++ xfer->rx_buf, xfer->rx_dma);
++ } else {
++ spi_writel(as, RNCR, 0);
++ spi_writel(as, TNCR, 0);
++ }
+
+- as->remaining_bytes -= len;
+- if (msg->spi->bits_per_word > 8)
+- len >>= 1;
+-
+- /* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer"
+- * mechanism might help avoid the IRQ latency between transfers
+- * (and improve the nCS0 errata handling on at91rm9200 chips)
+- *
+- * We're also waiting for ENDRX before we start the next
++ /* REVISIT: We're waiting for ENDRX before we start the next
+ * transfer because we need to handle some difficult timing
+ * issues otherwise. If we wait for ENDTX in one transfer and
+ * then starts waiting for ENDRX in the next, it's difficult
+@@ -186,17 +255,7 @@ static void atmel_spi_next_xfer(struct s
+ *
+ * It should be doable, though. Just not now...
+ */
+- spi_writel(as, TNCR, 0);
+- spi_writel(as, RNCR, 0);
+ spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
+-
+- dev_dbg(&msg->spi->dev,
+- " start xfer %p: len %u tx %p/%08x rx %p/%08x imr %03x\n",
+- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
+- xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR));
+-
+- spi_writel(as, RCR, len);
+- spi_writel(as, TCR, len);
+ spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
+ }
+
+@@ -294,6 +353,7 @@ atmel_spi_msg_done(struct spi_master *ma
+ spin_lock(&as->lock);
+
+ as->current_transfer = NULL;
++ as->next_transfer = NULL;
+
+ /* continue if needed */
+ if (list_empty(&as->queue) || as->stopping)
+@@ -377,7 +437,7 @@ atmel_spi_interrupt(int irq, void *dev_i
+
+ spi_writel(as, IDR, pending);
+
+- if (as->remaining_bytes == 0) {
++ if (as->current_remaining_bytes == 0) {
+ msg->actual_length += xfer->len;
+
+ if (!msg->is_dma_mapped)
+@@ -387,7 +447,7 @@ atmel_spi_interrupt(int irq, void *dev_i
+ if (xfer->delay_usecs)
+ udelay(xfer->delay_usecs);
+
+- if (msg->transfers.prev == &xfer->transfer_list) {
++ if (atmel_spi_xfer_is_last(msg, xfer)) {
+ /* report completed message */
+ atmel_spi_msg_done(master, as, msg, 0,
+ xfer->cs_change);
+@@ -490,9 +550,14 @@ static int atmel_spi_setup(struct spi_de
+ if (!(spi->mode & SPI_CPHA))
+ csr |= SPI_BIT(NCPHA);
+
+- /* TODO: DLYBS and DLYBCT */
+- csr |= SPI_BF(DLYBS, 10);
+- csr |= SPI_BF(DLYBCT, 10);
++ /* DLYBS is mostly irrelevant since we manage chipselect using GPIOs.
++ *
++ * DLYBCT would add delays between words, slowing down transfers.
++ * It could potentially be useful to cope with DMA bottlenecks, but
++ * in those cases it's probably best to just use a lower bitrate.
++ */
++ csr |= SPI_BF(DLYBS, 0);
++ csr |= SPI_BF(DLYBCT, 0);
+
+ /* chipselect must have been muxed as GPIO (e.g. in board setup) */
+ npcs_pin = (unsigned int)spi->controller_data;
+diff -Nrup linux-2.6.24/drivers/video/atmel_lcdfb.c linux-avr32/drivers/video/atmel_lcdfb.c
+--- linux-2.6.24/drivers/video/atmel_lcdfb.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/video/atmel_lcdfb.c 2008-02-01 14:51:44.000000000 -0500
+@@ -37,7 +37,9 @@
+ #endif
+
+ #if defined(CONFIG_ARCH_AT91)
+-#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT
++#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
++ | FBINFO_PARTIAL_PAN_OK \
++ | FBINFO_HWACCEL_YPAN)
+
+ static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
+ struct fb_var_screeninfo *var)
+@@ -74,7 +76,7 @@ static struct fb_fix_screeninfo atmel_lc
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .xpanstep = 0,
+- .ypanstep = 0,
++ .ypanstep = 1,
+ .ywrapstep = 0,
+ .accel = FB_ACCEL_NONE,
+ };
+@@ -148,6 +150,8 @@ static int atmel_lcdfb_alloc_video_memor
+ return -ENOMEM;
+ }
+
++ memset(info->screen_base, 0, info->fix.smem_len);
++
+ return 0;
+ }
+
+@@ -203,6 +207,26 @@ static int atmel_lcdfb_check_var(struct
+ var->transp.offset = var->transp.length = 0;
+ var->xoffset = var->yoffset = 0;
+
++ /* Saturate vertical and horizontal timings at maximum values */
++ var->vsync_len = min_t(u32, var->vsync_len,
++ (ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1);
++ var->upper_margin = min_t(u32, var->upper_margin,
++ ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET);
++ var->lower_margin = min_t(u32, var->lower_margin,
++ ATMEL_LCDC_VFP);
++ var->right_margin = min_t(u32, var->right_margin,
++ (ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1);
++ var->hsync_len = min_t(u32, var->hsync_len,
++ (ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1);
++ var->left_margin = min_t(u32, var->left_margin,
++ ATMEL_LCDC_HBP + 1);
++
++ /* Some parameters can't be zero */
++ var->vsync_len = max_t(u32, var->vsync_len, 1);
++ var->right_margin = max_t(u32, var->right_margin, 1);
++ var->hsync_len = max_t(u32, var->hsync_len, 1);
++ var->left_margin = max_t(u32, var->left_margin, 1);
++
+ switch (var->bits_per_pixel) {
+ case 1:
+ case 2:
+@@ -516,7 +540,6 @@ static int __init atmel_lcdfb_init_fbinf
+ struct fb_info *info = sinfo->info;
+ int ret = 0;
+
+- memset_io(info->screen_base, 0, info->fix.smem_len);
+ info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
+
+ dev_info(info->device,
+@@ -645,6 +668,11 @@ static int __init atmel_lcdfb_probe(stru
+ info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
+ if (!info->screen_base)
+ goto release_intmem;
++
++ /*
++ * Don't clear the framebuffer -- someone may have set
++ * up a splash image.
++ */
+ } else {
+ /* alocate memory buffer */
+ ret = atmel_lcdfb_alloc_video_memory(sinfo);
+diff -Nrup linux-2.6.24/drivers/video/console/Kconfig linux-avr32/drivers/video/console/Kconfig
+--- linux-2.6.24/drivers/video/console/Kconfig 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/video/console/Kconfig 2008-02-01 14:51:44.000000000 -0500
+@@ -6,7 +6,7 @@ menu "Console display driver support"
+
+ config VGA_CONSOLE
+ bool "VGA text console" if EMBEDDED || !X86
+- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN
++ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN && !AVR32
+ default y
+ help
+ Saying Y here will allow you to use Linux in text mode through a
+diff -Nrup linux-2.6.24/drivers/watchdog/Kconfig linux-avr32/drivers/watchdog/Kconfig
+--- linux-2.6.24/drivers/watchdog/Kconfig 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/drivers/watchdog/Kconfig 2008-02-01 14:51:44.000000000 -0500
+@@ -223,7 +223,7 @@ config DAVINCI_WATCHDOG
+
+ config AT32AP700X_WDT
+ tristate "AT32AP700x watchdog"
+- depends on CPU_AT32AP7000
++ depends on CPU_AT32AP700X
+ help
+ Watchdog timer embedded into AT32AP700x devices. This will reboot
+ your system when the timeout is reached.
+diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/at32ap7000.h linux-avr32/include/asm-avr32/arch-at32ap/at32ap7000.h
+--- linux-2.6.24/include/asm-avr32/arch-at32ap/at32ap7000.h 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/arch-at32ap/at32ap7000.h 1969-12-31 19:00:00.000000000 -0500
+@@ -1,35 +0,0 @@
+-/*
+- * Pin definitions for AT32AP7000.
+- *
+- * Copyright (C) 2006 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-#ifndef __ASM_ARCH_AT32AP7000_H__
+-#define __ASM_ARCH_AT32AP7000_H__
+-
+-#define GPIO_PERIPH_A 0
+-#define GPIO_PERIPH_B 1
+-
+-#define NR_GPIO_CONTROLLERS 4
+-
+-/*
+- * Pin numbers identifying specific GPIO pins on the chip. They can
+- * also be converted to IRQ numbers by passing them through
+- * gpio_to_irq().
+- */
+-#define GPIO_PIOA_BASE (0)
+-#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
+-#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
+-#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
+-#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
+-
+-#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N))
+-#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N))
+-#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N))
+-#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
+-#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N))
+-
+-#endif /* __ASM_ARCH_AT32AP7000_H__ */
+diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/at32ap700x.h linux-avr32/include/asm-avr32/arch-at32ap/at32ap700x.h
+--- linux-2.6.24/include/asm-avr32/arch-at32ap/at32ap700x.h 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/include/asm-avr32/arch-at32ap/at32ap700x.h 2008-02-01 14:51:45.000000000 -0500
+@@ -0,0 +1,35 @@
++/*
++ * Pin definitions for AT32AP7000.
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_ARCH_AT32AP700X_H__
++#define __ASM_ARCH_AT32AP700X_H__
++
++#define GPIO_PERIPH_A 0
++#define GPIO_PERIPH_B 1
++
++#define NR_GPIO_CONTROLLERS 4
++
++/*
++ * Pin numbers identifying specific GPIO pins on the chip. They can
++ * also be converted to IRQ numbers by passing them through
++ * gpio_to_irq().
++ */
++#define GPIO_PIOA_BASE (0)
++#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
++#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
++#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
++#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
++
++#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N))
++#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N))
++#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N))
++#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
++#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N))
++
++#endif /* __ASM_ARCH_AT32AP700X_H__ */
+diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/board.h linux-avr32/include/asm-avr32/arch-at32ap/board.h
+--- linux-2.6.24/include/asm-avr32/arch-at32ap/board.h 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/arch-at32ap/board.h 2008-02-01 14:51:45.000000000 -0500
+@@ -51,6 +51,9 @@ struct platform_device *
+ at32_add_device_ide(unsigned int id, unsigned int extint,
+ struct ide_platform_data *data);
+
++/* mask says which PWM channels to mux */
++struct platform_device *at32_add_device_pwm(u32 mask);
++
+ /* depending on what's hooked up, not all SSC pins will be used */
+ #define ATMEL_SSC_TK 0x01
+ #define ATMEL_SSC_TF 0x02
+@@ -66,7 +69,13 @@ struct platform_device *
+ at32_add_device_ssc(unsigned int id, unsigned int flags);
+
+ struct platform_device *at32_add_device_twi(unsigned int id);
+-struct platform_device *at32_add_device_mci(unsigned int id);
++
++struct mci_platform_data {
++ int detect_pin;
++ int wp_pin;
++};
++struct platform_device *
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
+ struct platform_device *at32_add_device_ac97c(unsigned int id);
+ struct platform_device *at32_add_device_abdac(unsigned int id);
+
+diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/cpu.h linux-avr32/include/asm-avr32/arch-at32ap/cpu.h
+--- linux-2.6.24/include/asm-avr32/arch-at32ap/cpu.h 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/arch-at32ap/cpu.h 2008-02-01 14:51:45.000000000 -0500
+@@ -14,7 +14,7 @@
+ * Only AT32AP7000 is defined for now. We can identify the specific
+ * chip at runtime, but I'm not sure if it's really worth it.
+ */
+-#ifdef CONFIG_CPU_AT32AP7000
++#ifdef CONFIG_CPU_AT32AP700X
+ # define cpu_is_at32ap7000() (1)
+ #else
+ # define cpu_is_at32ap7000() (0)
+diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/io.h linux-avr32/include/asm-avr32/arch-at32ap/io.h
+--- linux-2.6.24/include/asm-avr32/arch-at32ap/io.h 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/arch-at32ap/io.h 2008-02-01 14:51:45.000000000 -0500
+@@ -4,7 +4,7 @@
+ /* For "bizarre" halfword swapping */
+ #include <linux/byteorder/swabb.h>
+
+-#if defined(CONFIG_AP7000_32_BIT_SMC)
++#if defined(CONFIG_AP700X_32_BIT_SMC)
+ # define __swizzle_addr_b(addr) (addr ^ 3UL)
+ # define __swizzle_addr_w(addr) (addr ^ 2UL)
+ # define __swizzle_addr_l(addr) (addr)
+@@ -14,7 +14,7 @@
+ # define __mem_ioswabb(a, x) (x)
+ # define __mem_ioswabw(a, x) swab16(x)
+ # define __mem_ioswabl(a, x) swab32(x)
+-#elif defined(CONFIG_AP7000_16_BIT_SMC)
++#elif defined(CONFIG_AP700X_16_BIT_SMC)
+ # define __swizzle_addr_b(addr) (addr ^ 1UL)
+ # define __swizzle_addr_w(addr) (addr)
+ # define __swizzle_addr_l(addr) (addr)
+diff -Nrup linux-2.6.24/include/asm-avr32/arch-at32ap/portmux.h linux-avr32/include/asm-avr32/arch-at32ap/portmux.h
+--- linux-2.6.24/include/asm-avr32/arch-at32ap/portmux.h 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/arch-at32ap/portmux.h 2008-02-01 14:51:45.000000000 -0500
+@@ -26,4 +26,16 @@ void at32_select_periph(unsigned int pin
+ void at32_select_gpio(unsigned int pin, unsigned long flags);
+ void at32_reserve_pin(unsigned int pin);
+
++#ifdef CONFIG_GPIO_DEV
++
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port);
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
++void at32_deselect_pins(unsigned int port, u32 pins);
++
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
++
++#endif /* CONFIG_GPIO_DEV */
++
+ #endif /* __ASM_ARCH_PORTMUX_H__ */
+diff -Nrup linux-2.6.24/include/asm-avr32/dma-controller.h linux-avr32/include/asm-avr32/dma-controller.h
+--- linux-2.6.24/include/asm-avr32/dma-controller.h 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/include/asm-avr32/dma-controller.h 2008-02-01 14:51:45.000000000 -0500
+@@ -0,0 +1,166 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_AVR32_DMA_CONTROLLER_H
++#define __ASM_AVR32_DMA_CONTROLLER_H
++
++#include <linux/device.h>
++
++#define DMA_DIR_MEM_TO_MEM 0x0000
++#define DMA_DIR_MEM_TO_PERIPH 0x0001
++#define DMA_DIR_PERIPH_TO_MEM 0x0002
++#define DMA_DIR_PERIPH_TO_PERIPH 0x0003
++
++#define DMA_WIDTH_8BIT 0
++#define DMA_WIDTH_16BIT 1
++#define DMA_WIDTH_32BIT 2
++
++struct dma_request {
++ struct dma_controller *dmac;
++ struct list_head list;
++
++ unsigned short channel;
++
++ void (*xfer_complete)(struct dma_request *req);
++ void (*block_complete)(struct dma_request *req);
++ void (*error)(struct dma_request *req);
++};
++
++struct dma_request_sg {
++ struct dma_request req;
++
++ int nr_sg;
++ struct scatterlist *sg;
++ unsigned long block_size;
++ unsigned int nr_blocks;
++
++ dma_addr_t data_reg;
++ unsigned short periph_id;
++
++ unsigned char direction;
++ unsigned char width;
++};
++#define to_dma_request_sg(_req) \
++ container_of(_req, struct dma_request_sg, req)
++
++struct dma_request_cyclic {
++ struct dma_request req;
++
++ int periods;
++ unsigned long buffer_size;
++
++ dma_addr_t buffer_start;
++ dma_addr_t data_reg;
++
++ unsigned short periph_id;
++ unsigned char direction;
++ unsigned char width;
++
++ void *dev_id;
++};
++#define to_dma_request_cyclic(_req) \
++ container_of(_req, struct dma_request_cyclic, req)
++
++struct dma_request_memcpy {
++ struct dma_request req;
++
++ dma_addr_t src_addr;
++ unsigned int src_width;
++ unsigned int src_stride;
++
++ dma_addr_t dst_addr;
++ unsigned int dst_width;
++ unsigned int dst_stride;
++
++ size_t length;
++
++ unsigned short src_reverse:1;
++ unsigned short dst_reverse:1;
++};
++#define to_dma_request_memcpy(_req) \
++ container_of(_req, struct dma_request_memcpy, req)
++
++struct dma_controller {
++ struct list_head list;
++ int id;
++ struct device *dev;
++
++ int (*alloc_channel)(struct dma_controller *dmac);
++ void (*release_channel)(struct dma_controller *dmac,
++ int channel);
++ int (*prepare_request_sg)(struct dma_controller *dmac,
++ struct dma_request_sg *req);
++ int (*prepare_request_cyclic)(struct dma_controller *dmac,
++ struct dma_request_cyclic *req);
++ int (*prepare_request_memcpy)(struct dma_controller *dmac,
++ struct dma_request_memcpy *req);
++ int (*start_request)(struct dma_controller *dmac,
++ unsigned int channel);
++ int (*stop_request)(struct dma_controller *dmac,
++ unsigned int channel);
++ dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
++ unsigned int channel);
++};
++
++static inline int
++dma_alloc_channel(struct dma_controller *dmac)
++{
++ return dmac->alloc_channel(dmac);
++}
++
++static inline void
++dma_release_channel(struct dma_controller *dmac, int chan)
++{
++ dmac->release_channel(dmac, chan);
++}
++
++static inline int
++dma_prepare_request_sg(struct dma_controller *dmac,
++ struct dma_request_sg *req)
++{
++ return dmac->prepare_request_sg(dmac, req);
++}
++
++static inline int
++dma_prepare_request_cyclic(struct dma_controller *dmac,
++ struct dma_request_cyclic *req)
++{
++ return dmac->prepare_request_cyclic(dmac, req);
++}
++
++static inline int
++dma_prepare_request_memcpy(struct dma_controller *dmac,
++ struct dma_request_memcpy *req)
++{
++ return dmac->prepare_request_memcpy(dmac, req);
++}
++
++static inline int
++dma_start_request(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->start_request(dmac, channel);
++}
++
++static inline int
++dma_stop_request(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->stop_request(dmac, channel);
++}
++
++static inline dma_addr_t
++dma_get_current_pos(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->get_current_pos(dmac, channel);
++}
++
++extern int register_dma_controller(struct dma_controller *dmac);
++extern struct dma_controller *find_dma_controller(int id);
++
++#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
+diff -Nrup linux-2.6.24/include/asm-avr32/irq.h linux-avr32/include/asm-avr32/irq.h
+--- linux-2.6.24/include/asm-avr32/irq.h 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/irq.h 2008-02-01 14:51:45.000000000 -0500
+@@ -11,4 +11,9 @@
+
+ #define irq_canonicalize(i) (i)
+
++#ifndef __ASSEMBLER__
++int nmi_enable(void);
++void nmi_disable(void);
++#endif
++
+ #endif /* __ASM_AVR32_IOCTLS_H */
+diff -Nrup linux-2.6.24/include/asm-avr32/kdebug.h linux-avr32/include/asm-avr32/kdebug.h
+--- linux-2.6.24/include/asm-avr32/kdebug.h 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/kdebug.h 2008-02-01 14:51:45.000000000 -0500
+@@ -5,6 +5,7 @@
+ enum die_val {
+ DIE_BREAKPOINT,
+ DIE_SSTEP,
++ DIE_NMI,
+ };
+
+ #endif /* __ASM_AVR32_KDEBUG_H */
+diff -Nrup linux-2.6.24/include/asm-avr32/ocd.h linux-avr32/include/asm-avr32/ocd.h
+--- linux-2.6.24/include/asm-avr32/ocd.h 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/ocd.h 2008-02-01 14:51:45.000000000 -0500
+@@ -533,6 +533,11 @@ static inline void __ocd_write(unsigned
+ #define ocd_read(reg) __ocd_read(OCD_##reg)
+ #define ocd_write(reg, value) __ocd_write(OCD_##reg, value)
+
++struct task_struct;
++
++void ocd_enable(struct task_struct *child);
++void ocd_disable(struct task_struct *child);
++
+ #endif /* !__ASSEMBLER__ */
+
+ #endif /* __ASM_AVR32_OCD_H */
+diff -Nrup linux-2.6.24/include/asm-avr32/processor.h linux-avr32/include/asm-avr32/processor.h
+--- linux-2.6.24/include/asm-avr32/processor.h 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/processor.h 2008-02-01 14:51:45.000000000 -0500
+@@ -57,11 +57,25 @@ struct avr32_cpuinfo {
+ unsigned short cpu_revision;
+ enum tlb_config tlb_config;
+ unsigned long features;
++ u32 device_id;
+
+ struct cache_info icache;
+ struct cache_info dcache;
+ };
+
++static inline unsigned int avr32_get_manufacturer_id(struct avr32_cpuinfo *cpu)
++{
++ return (cpu->device_id >> 1) & 0x7f;
++}
++static inline unsigned int avr32_get_product_number(struct avr32_cpuinfo *cpu)
++{
++ return (cpu->device_id >> 12) & 0xffff;
++}
++static inline unsigned int avr32_get_chip_revision(struct avr32_cpuinfo *cpu)
++{
++ return (cpu->device_id >> 28) & 0x0f;
++}
++
+ extern struct avr32_cpuinfo boot_cpu_data;
+
+ #ifdef CONFIG_SMP
+diff -Nrup linux-2.6.24/include/asm-avr32/ptrace.h linux-avr32/include/asm-avr32/ptrace.h
+--- linux-2.6.24/include/asm-avr32/ptrace.h 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/ptrace.h 2008-02-01 14:51:45.000000000 -0500
+@@ -121,7 +121,15 @@ struct pt_regs {
+ };
+
+ #ifdef __KERNEL__
+-# define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER)
++
++#include <asm/ocd.h>
++
++#define arch_ptrace_attach(child) ocd_enable(child)
++
++#define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER)
++#define instruction_pointer(regs) ((regs)->pc)
++#define profile_pc(regs) instruction_pointer(regs)
++
+ extern void show_regs (struct pt_regs *);
+
+ static __inline__ int valid_user_regs(struct pt_regs *regs)
+@@ -141,9 +149,6 @@ static __inline__ int valid_user_regs(st
+ return 0;
+ }
+
+-#define instruction_pointer(regs) ((regs)->pc)
+-
+-#define profile_pc(regs) instruction_pointer(regs)
+
+ #endif /* __KERNEL__ */
+
+diff -Nrup linux-2.6.24/include/asm-avr32/thread_info.h linux-avr32/include/asm-avr32/thread_info.h
+--- linux-2.6.24/include/asm-avr32/thread_info.h 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/asm-avr32/thread_info.h 2008-02-01 14:51:45.000000000 -0500
+@@ -88,6 +88,7 @@ static inline struct thread_info *curren
+ #define TIF_MEMDIE 6
+ #define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */
+ #define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */
++#define TIF_DEBUG 30 /* debugging enabled */
+ #define TIF_USERSPACE 31 /* true if FS sets userspace */
+
+ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
+diff -Nrup linux-2.6.24/include/linux/atmel_pwm.h linux-avr32/include/linux/atmel_pwm.h
+--- linux-2.6.24/include/linux/atmel_pwm.h 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/include/linux/atmel_pwm.h 2008-02-01 14:51:47.000000000 -0500
+@@ -0,0 +1,70 @@
++#ifndef __LINUX_ATMEL_PWM_H
++#define __LINUX_ATMEL_PWM_H
++
++/**
++ * struct pwm_channel - driver handle to a PWM channel
++ * @regs: base of this channel's registers
++ * @index: number of this channel (0..31)
++ * @mck: base clock rate, which can be prescaled and maybe subdivided
++ *
++ * Drivers initialize a pwm_channel structure using pwm_channel_alloc().
++ * Then they configure its clock rate (derived from MCK), alignment,
++ * polarity, and duty cycle by writing directly to the channel registers,
++ * before enabling the channel by calling pwm_channel_enable().
++ *
++ * After emitting a PWM signal for the desired length of time, drivers
++ * may then pwm_channel_disable() or pwm_channel_free(). Both of these
++ * disable the channel, but when it's freed the IRQ is deconfigured and
++ * the channel must later be re-allocated and reconfigured.
++ *
++ * Note that if the period or duty cycle need to be changed while the
++ * PWM channel is operating, drivers must use the PWM_CUPD double buffer
++ * mechanism, either polling until they change or getting implicitly
++ * notified through a once-per-period interrupt handler.
++ */
++struct pwm_channel {
++ void __iomem *regs;
++ unsigned index;
++ unsigned long mck;
++};
++
++extern int pwm_channel_alloc(int index, struct pwm_channel *ch);
++extern int pwm_channel_free(struct pwm_channel *ch);
++
++extern int pwm_clk_alloc(unsigned prescale, unsigned div);
++extern void pwm_clk_free(unsigned clk);
++
++extern int __pwm_channel_onoff(struct pwm_channel *ch, int enabled);
++
++#define pwm_channel_enable(ch) __pwm_channel_onoff((ch), 1)
++#define pwm_channel_disable(ch) __pwm_channel_onoff((ch), 0)
++
++/* periodic interrupts, mostly for CUPD changes to period or cycle */
++extern int pwm_channel_handler(struct pwm_channel *ch,
++ void (*handler)(struct pwm_channel *ch));
++
++/* per-channel registers (banked at pwm_channel->regs) */
++#define PWM_CMR 0x00 /* mode register */
++#define PWM_CPR_CPD (1 << 10) /* set: CUPD modifies period */
++#define PWM_CPR_CPOL (1 << 9) /* set: idle high */
++#define PWM_CPR_CALG (1 << 8) /* set: center align */
++#define PWM_CPR_CPRE (0xf << 0) /* mask: rate is mck/(2^pre) */
++#define PWM_CPR_CLKA (0xb << 0) /* rate CLKA */
++#define PWM_CPR_CLKB (0xc << 0) /* rate CLKB */
++#define PWM_CDTY 0x04 /* duty cycle (max of CPRD) */
++#define PWM_CPRD 0x08 /* period (count up from zero) */
++#define PWM_CCNT 0x0c /* counter (20 bits?) */
++#define PWM_CUPD 0x10 /* update CPRD (or CDTY) next period */
++
++static inline void
++pwm_channel_writel(struct pwm_channel *pwmc, unsigned offset, u32 val)
++{
++ __raw_writel(val, pwmc->regs + offset);
++}
++
++static inline u32 pwm_channel_readl(struct pwm_channel *pwmc, unsigned offset)
++{
++ return __raw_readl(pwmc->regs + offset);
++}
++
++#endif /* __LINUX_ATMEL_PWM_H */
+diff -Nrup linux-2.6.24/include/video/atmel_lcdc.h linux-avr32/include/video/atmel_lcdc.h
+--- linux-2.6.24/include/video/atmel_lcdc.h 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/include/video/atmel_lcdc.h 2008-02-01 14:51:47.000000000 -0500
+@@ -115,20 +115,20 @@ struct atmel_lcdfb_info {
+ #define ATMEL_LCDC_MEMOR_LITTLE (1 << 31)
+
+ #define ATMEL_LCDC_TIM1 0x0808
+-#define ATMEL_LCDC_VFP (0xff << 0)
++#define ATMEL_LCDC_VFP (0xffU << 0)
+ #define ATMEL_LCDC_VBP_OFFSET 8
+-#define ATMEL_LCDC_VBP (0xff << ATMEL_LCDC_VBP_OFFSET)
++#define ATMEL_LCDC_VBP (0xffU << ATMEL_LCDC_VBP_OFFSET)
+ #define ATMEL_LCDC_VPW_OFFSET 16
+-#define ATMEL_LCDC_VPW (0x3f << ATMEL_LCDC_VPW_OFFSET)
++#define ATMEL_LCDC_VPW (0x3fU << ATMEL_LCDC_VPW_OFFSET)
+ #define ATMEL_LCDC_VHDLY_OFFSET 24
+-#define ATMEL_LCDC_VHDLY (0xf << ATMEL_LCDC_VHDLY_OFFSET)
++#define ATMEL_LCDC_VHDLY (0xfU << ATMEL_LCDC_VHDLY_OFFSET)
+
+ #define ATMEL_LCDC_TIM2 0x080c
+-#define ATMEL_LCDC_HBP (0xff << 0)
++#define ATMEL_LCDC_HBP (0xffU << 0)
+ #define ATMEL_LCDC_HPW_OFFSET 8
+-#define ATMEL_LCDC_HPW (0x3f << ATMEL_LCDC_HPW_OFFSET)
++#define ATMEL_LCDC_HPW (0x3fU << ATMEL_LCDC_HPW_OFFSET)
+ #define ATMEL_LCDC_HFP_OFFSET 21
+-#define ATMEL_LCDC_HFP (0x7ff << ATMEL_LCDC_HFP_OFFSET)
++#define ATMEL_LCDC_HFP (0x7ffU << ATMEL_LCDC_HFP_OFFSET)
+
+ #define ATMEL_LCDC_LCDFRMCFG 0x0810
+ #define ATMEL_LCDC_LINEVAL (0x7ff << 0)
+diff -Nrup linux-2.6.24/kernel/ptrace.c linux-avr32/kernel/ptrace.c
+--- linux-2.6.24/kernel/ptrace.c 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/kernel/ptrace.c 2008-02-01 14:51:47.000000000 -0500
+@@ -470,6 +470,8 @@ asmlinkage long sys_ptrace(long request,
+ lock_kernel();
+ if (request == PTRACE_TRACEME) {
+ ret = ptrace_traceme();
++ if (!ret)
++ arch_ptrace_attach(current);
+ goto out;
+ }
+
+diff -Nrup linux-2.6.24/sound/avr32/ac97c.c linux-avr32/sound/avr32/ac97c.c
+--- linux-2.6.24/sound/avr32/ac97c.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/sound/avr32/ac97c.c 2008-02-01 14:51:48.000000000 -0500
+@@ -0,0 +1,914 @@
++/*
++ * Driver for the Atmel AC97 controller
++ *
++ * Copyright (C) 2005-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/mutex.h>
++#include <linux/io.h>
++
++#include <sound/driver.h>
++#include <sound/core.h>
++#include <sound/initval.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/ac97_codec.h>
++#include <sound/memalloc.h>
++
++#include <asm/dma-controller.h>
++
++#include "ac97c.h"
++
++/* Serialize access to opened */
++static DEFINE_MUTEX(opened_mutex);
++
++struct atmel_ac97_dma_info {
++ struct dma_request_cyclic req_tx;
++ struct dma_request_cyclic req_rx;
++ unsigned short rx_periph_id;
++ unsigned short tx_periph_id;
++};
++
++struct atmel_ac97 {
++ /* Serialize access to opened */
++ spinlock_t lock;
++ void __iomem *regs;
++ struct snd_pcm_substream *playback_substream;
++ struct snd_pcm_substream *capture_substream;
++ struct snd_card *card;
++ struct snd_pcm *pcm;
++ struct snd_ac97 *ac97;
++ struct snd_ac97_bus *ac97_bus;
++ int opened;
++ int period;
++ u64 cur_format;
++ unsigned int cur_rate;
++ struct clk *mck;
++ struct platform_device *pdev;
++ struct atmel_ac97_dma_info dma;
++};
++
++#define get_chip(card) ((struct atmel_ac97 *)(card)->private_data)
++
++#define ac97c_writel(chip, reg, val) \
++ __raw_writel((val), (chip)->regs + AC97C_##reg)
++#define ac97c_readl(chip, reg) \
++ __raw_readl((chip)->regs + AC97C_##reg)
++
++/*
++ * PCM part
++ */
++static struct snd_pcm_hardware snd_atmel_ac97_playback_hw = {
++ .info = (SNDRV_PCM_INFO_INTERLEAVED
++ | SNDRV_PCM_INFO_MMAP
++ | SNDRV_PCM_INFO_MMAP_VALID
++ | SNDRV_PCM_INFO_BLOCK_TRANSFER
++ | SNDRV_PCM_INFO_JOINT_DUPLEX),
++ .formats = (SNDRV_PCM_FMTBIT_S16_BE
++ | SNDRV_PCM_FMTBIT_S16_LE),
++ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
++ .rate_min = 4000,
++ .rate_max = 48000,
++ .channels_min = 1,
++ .channels_max = 6,
++ .buffer_bytes_max = 64*1024,
++ .period_bytes_min = 512,
++ .period_bytes_max = 4095,
++ .periods_min = 8,
++ .periods_max = 1024,
++};
++
++static struct snd_pcm_hardware snd_atmel_ac97_capture_hw = {
++ .info = (SNDRV_PCM_INFO_INTERLEAVED
++ | SNDRV_PCM_INFO_MMAP
++ | SNDRV_PCM_INFO_MMAP_VALID
++ | SNDRV_PCM_INFO_BLOCK_TRANSFER
++ | SNDRV_PCM_INFO_JOINT_DUPLEX),
++ .formats = (SNDRV_PCM_FMTBIT_S16_BE
++ | SNDRV_PCM_FMTBIT_S16_LE),
++ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
++ .rate_min = 4000,
++ .rate_max = 48000,
++ .channels_min = 1,
++ .channels_max = 2,
++ .buffer_bytes_max = 64*1024,
++ .period_bytes_min = 512,
++ .period_bytes_max = 4095,
++ .periods_min = 8,
++ .periods_max = 1024,
++};
++
++/*
++ * PCM functions
++ */
++static int
++snd_atmel_ac97_playback_open(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++
++ mutex_lock(&opened_mutex);
++ chip->opened++;
++ runtime->hw = snd_atmel_ac97_playback_hw;
++ if (chip->cur_rate) {
++ runtime->hw.rate_min = chip->cur_rate;
++ runtime->hw.rate_max = chip->cur_rate;
++ }
++ if (chip->cur_format)
++ runtime->hw.formats = (1ULL << chip->cur_format);
++ mutex_unlock(&opened_mutex);
++ chip->playback_substream = substream;
++ chip->period = 0;
++ return 0;
++}
++
++static int
++snd_atmel_ac97_capture_open(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++
++ mutex_lock(&opened_mutex);
++ chip->opened++;
++ runtime->hw = snd_atmel_ac97_capture_hw;
++ if (chip->cur_rate) {
++ runtime->hw.rate_min = chip->cur_rate;
++ runtime->hw.rate_max = chip->cur_rate;
++ }
++ if (chip->cur_format)
++ runtime->hw.formats = (1ULL << chip->cur_format);
++ mutex_unlock(&opened_mutex);
++ chip->capture_substream = substream;
++ chip->period = 0;
++ return 0;
++}
++
++static int snd_atmel_ac97_playback_close(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ mutex_lock(&opened_mutex);
++ chip->opened--;
++ if (!chip->opened) {
++ chip->cur_rate = 0;
++ chip->cur_format = 0;
++ }
++ mutex_unlock(&opened_mutex);
++ return 0;
++}
++
++static int snd_atmel_ac97_capture_close(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ mutex_lock(&opened_mutex);
++ chip->opened--;
++ if (!chip->opened) {
++ chip->cur_rate = 0;
++ chip->cur_format = 0;
++ }
++ mutex_unlock(&opened_mutex);
++ return 0;
++}
++
++static int
++snd_atmel_ac97_playback_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *hw_params)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ int err;
++
++ err = snd_pcm_lib_malloc_pages(substream,
++ params_buffer_bytes(hw_params));
++ if (err < 0)
++ return err;
++
++ /* Set restrictions to params */
++ mutex_lock(&opened_mutex);
++ chip->cur_rate = params_rate(hw_params);
++ chip->cur_format = params_format(hw_params);
++ mutex_unlock(&opened_mutex);
++
++ return 0;
++}
++
++static int
++snd_atmel_ac97_capture_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *hw_params)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ int err;
++
++ err = snd_pcm_lib_malloc_pages(substream,
++ params_buffer_bytes(hw_params));
++ if (err < 0)
++ return err;
++
++ /* Set restrictions to params */
++ mutex_lock(&opened_mutex);
++ chip->cur_rate = params_rate(hw_params);
++ chip->cur_format = params_format(hw_params);
++ mutex_unlock(&opened_mutex);
++
++ return 0;
++}
++
++static int snd_atmel_ac97_playback_hw_free(struct snd_pcm_substream *substream)
++{
++ return snd_pcm_lib_free_pages(substream);
++}
++
++static int snd_atmel_ac97_capture_hw_free(struct snd_pcm_substream *substream)
++{
++
++ return snd_pcm_lib_free_pages(substream);
++}
++
++static int snd_atmel_ac97_playback_prepare(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct platform_device *pdev = chip->pdev;
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ int block_size = frames_to_bytes(runtime, runtime->period_size);
++ unsigned long word = 0;
++ unsigned long buffer_size = 0;
++
++ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
++ block_size * 2, DMA_TO_DEVICE);
++
++ /* Assign slots to channels */
++ switch (substream->runtime->channels) {
++ case 1:
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
++ break;
++ case 2:
++ /* Assign Left and Right slot to Channel A */
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
++ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
++ break;
++ default:
++ /* TODO: support more than two channels */
++ return -EINVAL;
++ break;
++ }
++ ac97c_writel(chip, OCA, word);
++
++ /* Configure sample format and size */
++ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
++
++ switch (runtime->format) {
++ case SNDRV_PCM_FORMAT_S16_LE:
++ word |= AC97C_CMR_CEM_LITTLE;
++ break;
++ case SNDRV_PCM_FORMAT_S16_BE: /* fall through */
++ default:
++ word &= ~AC97C_CMR_CEM_LITTLE;
++ break;
++ }
++
++ ac97c_writel(chip, CAMR, word);
++
++ /* Set variable rate if needed */
++ if (runtime->rate != 48000) {
++ word = ac97c_readl(chip, MR);
++ word |= AC97C_MR_VRA;
++ ac97c_writel(chip, MR, word);
++ } else {
++ /* Clear Variable Rate Bit */
++ word = ac97c_readl(chip, MR);
++ word &= ~AC97C_MR_VRA;
++ ac97c_writel(chip, MR, word);
++ }
++
++ /* Set rate */
++ snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
++
++ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
++ runtime->periods;
++
++ chip->dma.req_tx.buffer_size = buffer_size;
++ chip->dma.req_tx.periods = runtime->periods;
++
++ BUG_ON(chip->dma.req_tx.buffer_size !=
++ (chip->dma.req_tx.periods *
++ frames_to_bytes(runtime, runtime->period_size)));
++
++ chip->dma.req_tx.buffer_start = runtime->dma_addr;
++ chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
++ chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
++ chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
++ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_tx.dev_id = chip;
++
++ return 0;
++}
++
++static int snd_atmel_ac97_capture_prepare(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct platform_device *pdev = chip->pdev;
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ int block_size = frames_to_bytes(runtime, runtime->period_size);
++ unsigned long word = 0;
++ unsigned long buffer_size = 0;
++
++ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
++ block_size * 2, DMA_FROM_DEVICE);
++
++ /* Assign slots to channels */
++ switch (substream->runtime->channels) {
++ case 1:
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
++ break;
++ case 2:
++ /* Assign Left and Right slot to Channel A */
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
++ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
++ break;
++ default:
++ /* TODO: support more than two channels */
++ return -EINVAL;
++ break;
++ }
++ ac97c_writel(chip, ICA, word);
++
++ /* Configure sample format and size */
++ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
++
++ switch (runtime->format) {
++ case SNDRV_PCM_FORMAT_S16_LE:
++ word |= AC97C_CMR_CEM_LITTLE;
++ break;
++ case SNDRV_PCM_FORMAT_S16_BE:
++ default:
++ word &= ~(AC97C_CMR_CEM_LITTLE);
++ break;
++ }
++
++ ac97c_writel(chip, CAMR, word);
++
++ /* Set variable rate if needed */
++ if (runtime->rate != 48000) {
++ word = ac97c_readl(chip, MR);
++ word |= AC97C_MR_VRA;
++ ac97c_writel(chip, MR, word);
++ } else {
++ /* Clear Variable Rate Bit */
++ word = ac97c_readl(chip, MR);
++ word &= ~(AC97C_MR_VRA);
++ ac97c_writel(chip, MR, word);
++ }
++
++ /* Set rate */
++ snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
++
++ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
++ runtime->periods;
++
++ chip->dma.req_rx.buffer_size = buffer_size;
++ chip->dma.req_rx.periods = runtime->periods;
++
++ BUG_ON(chip->dma.req_rx.buffer_size !=
++ (chip->dma.req_rx.periods *
++ frames_to_bytes(runtime, runtime->period_size)));
++
++ chip->dma.req_rx.buffer_start = runtime->dma_addr;
++ chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
++ chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
++ chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
++ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_rx.dev_id = chip;
++
++ return 0;
++}
++
++ static int
++snd_atmel_ac97_playback_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ unsigned long camr;
++ int flags, err = 0;
++
++ spin_lock_irqsave(&chip->lock, flags);
++ camr = ac97c_readl(chip, CAMR);
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
++ &chip->dma.req_tx);
++ dma_start_request(chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel);
++ camr |= AC97C_CMR_CENA;
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ err = dma_stop_request(chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel);
++ if (chip->opened <= 1)
++ camr &= ~AC97C_CMR_CENA;
++ break;
++ default:
++ err = -EINVAL;
++ break;
++ }
++
++ ac97c_writel(chip, CAMR, camr);
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++ return err;
++}
++
++ static int
++snd_atmel_ac97_capture_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ unsigned long camr;
++ int flags, err = 0;
++
++ spin_lock_irqsave(&chip->lock, flags);
++ camr = ac97c_readl(chip, CAMR);
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
++ &chip->dma.req_rx);
++ dma_start_request(chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel);
++ camr |= AC97C_CMR_CENA;
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ err = dma_stop_request(chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel);
++ mutex_lock(&opened_mutex);
++ if (chip->opened <= 1)
++ camr &= ~AC97C_CMR_CENA;
++ mutex_unlock(&opened_mutex);
++ break;
++ default:
++ err = -EINVAL;
++ break;
++ }
++
++ ac97c_writel(chip, CAMR, camr);
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++ return err;
++}
++
++ static snd_pcm_uframes_t
++snd_atmel_ac97_playback_pointer(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ snd_pcm_uframes_t pos;
++ unsigned long bytes;
++
++ bytes = (dma_get_current_pos
++ (chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel) - runtime->dma_addr);
++ pos = bytes_to_frames(runtime, bytes);
++ if (pos >= runtime->buffer_size)
++ pos -= runtime->buffer_size;
++
++ return pos;
++}
++
++ static snd_pcm_uframes_t
++snd_atmel_ac97_capture_pointer(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ snd_pcm_uframes_t pos;
++ unsigned long bytes;
++
++ bytes = (dma_get_current_pos
++ (chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel)
++ - runtime->dma_addr);
++ pos = bytes_to_frames(runtime, bytes);
++ if (pos >= runtime->buffer_size)
++ pos -= runtime->buffer_size;
++
++
++ return pos;
++}
++
++static struct snd_pcm_ops atmel_ac97_playback_ops = {
++ .open = snd_atmel_ac97_playback_open,
++ .close = snd_atmel_ac97_playback_close,
++ .ioctl = snd_pcm_lib_ioctl,
++ .hw_params = snd_atmel_ac97_playback_hw_params,
++ .hw_free = snd_atmel_ac97_playback_hw_free,
++ .prepare = snd_atmel_ac97_playback_prepare,
++ .trigger = snd_atmel_ac97_playback_trigger,
++ .pointer = snd_atmel_ac97_playback_pointer,
++};
++
++static struct snd_pcm_ops atmel_ac97_capture_ops = {
++ .open = snd_atmel_ac97_capture_open,
++ .close = snd_atmel_ac97_capture_close,
++ .ioctl = snd_pcm_lib_ioctl,
++ .hw_params = snd_atmel_ac97_capture_hw_params,
++ .hw_free = snd_atmel_ac97_capture_hw_free,
++ .prepare = snd_atmel_ac97_capture_prepare,
++ .trigger = snd_atmel_ac97_capture_trigger,
++ .pointer = snd_atmel_ac97_capture_pointer,
++};
++
++static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
++ /* Playback */
++ {
++ .exclusive = 1,
++ .r = { {
++ .slots = ((1 << AC97_SLOT_PCM_LEFT)
++ | (1 << AC97_SLOT_PCM_RIGHT)
++ | (1 << AC97_SLOT_PCM_CENTER)
++ | (1 << AC97_SLOT_PCM_SLEFT)
++ | (1 << AC97_SLOT_PCM_SRIGHT)
++ | (1 << AC97_SLOT_LFE)),
++ } }
++ },
++ /* PCM in */
++ {
++ .stream = 1,
++ .exclusive = 1,
++ .r = { {
++ .slots = ((1 << AC97_SLOT_PCM_LEFT)
++ | (1 << AC97_SLOT_PCM_RIGHT)),
++ } }
++ },
++ /* Mic in */
++ {
++ .stream = 1,
++ .exclusive = 1,
++ .r = { {
++ .slots = (1<<AC97_SLOT_MIC),
++ } }
++ },
++};
++
++static int __devinit snd_atmel_ac97_pcm_new(struct atmel_ac97 *chip)
++{
++ struct snd_pcm *pcm;
++ int err;
++
++ err = snd_ac97_pcm_assign(chip->ac97_bus,
++ ARRAY_SIZE(atmel_ac97_pcm_defs),
++ atmel_ac97_pcm_defs);
++ if (err)
++ return err;
++
++ err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
++ if (err)
++ return err;
++
++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
++ &atmel_ac97_playback_ops);
++
++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
++ &atmel_ac97_capture_ops);
++
++ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
++ &chip->pdev->dev,
++ 128 * 1024, 128 * 1024);
++
++ pcm->private_data = chip;
++ pcm->info_flags = 0;
++ strcpy(pcm->name, "Atmel-AC97");
++ chip->pcm = pcm;
++
++ return 0;
++}
++
++/*
++ * Mixer part.
++ */
++static int snd_atmel_ac97_mixer_new(struct atmel_ac97 *chip)
++{
++ int err;
++ struct snd_ac97_template template;
++
++ memset(&template, 0, sizeof(template));
++ template.private_data = chip;
++ err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
++
++ return err;
++}
++
++static void atmel_ac97_error(struct dma_request *_req)
++{
++ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
++ struct atmel_ac97 *chip = req->dev_id;
++
++ dev_dbg(&chip->pdev->dev, "DMA Controller error, channel %d\n",
++ req->req.channel);
++}
++
++static void atmel_ac97_block_complete(struct dma_request *_req)
++{
++ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
++ struct atmel_ac97 *chip = req->dev_id;
++ if (req->periph_id == chip->dma.tx_periph_id)
++ snd_pcm_period_elapsed(chip->playback_substream);
++ else
++ snd_pcm_period_elapsed(chip->capture_substream);
++}
++
++/*
++ * Codec part.
++ */
++static void snd_atmel_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
++ unsigned short val)
++{
++ struct atmel_ac97 *chip = get_chip(ac97);
++ unsigned long word;
++ int timeout = 40;
++
++ word = (reg & 0x7f) << 16 | val;
++
++ do {
++ if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
++ ac97c_writel(chip, COTHR, word);
++ return;
++ }
++ udelay(1);
++ } while (--timeout);
++
++ dev_dbg(&chip->pdev->dev, "codec write timeout\n");
++}
++
++static unsigned short snd_atmel_ac97_read(struct snd_ac97 *ac97,
++ unsigned short reg)
++{
++ struct atmel_ac97 *chip = get_chip(ac97);
++ unsigned long word;
++ int timeout = 40;
++ int write = 10;
++
++ word = (0x80 | (reg & 0x7f)) << 16;
++
++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
++ ac97c_readl(chip, CORHR);
++
++retry_write:
++ timeout = 40;
++
++ do {
++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
++ ac97c_writel(chip, COTHR, word);
++ goto read_reg;
++ }
++ mdelay(10);
++ } while (--timeout);
++
++ if (!--write)
++ goto timed_out;
++ goto retry_write;
++
++read_reg:
++ do {
++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0) {
++ unsigned short val = ac97c_readl(chip, CORHR);
++ return val;
++ }
++ mdelay(10);
++ } while (--timeout);
++
++ if (!--write)
++ goto timed_out;
++ goto retry_write;
++
++timed_out:
++ dev_dbg(&chip->pdev->dev, "codec read timeout\n");
++ return 0xffff;
++}
++
++static void snd_atmel_ac97_reset(struct atmel_ac97 *chip)
++{
++ ac97c_writel(chip, MR, AC97C_MR_WRST);
++ mdelay(1);
++ ac97c_writel(chip, MR, AC97C_MR_ENA);
++}
++
++static void snd_atmel_ac97_destroy(struct snd_card *card)
++{
++ struct atmel_ac97 *chip = get_chip(card);
++
++ if (chip->regs)
++ iounmap(chip->regs);
++
++ if (chip->mck) {
++ clk_disable(chip->mck);
++ clk_put(chip->mck);
++ }
++
++ if (chip->dma.req_tx.req.dmac) {
++ dma_release_channel(chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel);
++ }
++ if (chip->dma.req_rx.req.dmac) {
++ dma_release_channel(chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel);
++ }
++}
++
++static int __devinit snd_atmel_ac97_create(struct snd_card *card,
++ struct platform_device *pdev)
++{
++ static struct snd_ac97_bus_ops ops = {
++ .write = snd_atmel_ac97_write,
++ .read = snd_atmel_ac97_read,
++ };
++ struct atmel_ac97 *chip = get_chip(card);
++ struct resource *regs;
++ struct clk *mck;
++ int err;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++
++ mck = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(mck))
++ return PTR_ERR(mck);
++ clk_enable(mck);
++ chip->mck = mck;
++
++ card->private_free = snd_atmel_ac97_destroy;
++
++ spin_lock_init(&chip->lock);
++ chip->card = card;
++ chip->pdev = pdev;
++
++ chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!chip->regs)
++ return -ENOMEM;
++
++ snd_card_set_dev(card, &pdev->dev);
++
++ err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
++
++ return err;
++}
++
++static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
++{
++ static int dev;
++ struct snd_card *card;
++ struct atmel_ac97 *chip;
++ int err;
++ int ch;
++
++ mutex_init(&opened_mutex);
++
++ err = -ENOMEM;
++ card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
++ THIS_MODULE, sizeof(struct atmel_ac97));
++ if (!card)
++ goto out;
++ chip = get_chip(card);
++
++ err = snd_atmel_ac97_create(card, pdev);
++ if (err)
++ goto out_free_card;
++
++ snd_atmel_ac97_reset(chip);
++
++ err = snd_atmel_ac97_mixer_new(chip);
++ if (err)
++ goto out_free_card;
++
++ err = snd_atmel_ac97_pcm_new(chip);
++ if (err)
++ goto out_free_card;
++
++ /* TODO: Get this information from the platform device */
++ chip->dma.req_tx.req.dmac = find_dma_controller(0);
++ if (!chip->dma.req_tx.req.dmac) {
++ dev_dbg(&chip->pdev->dev, "DMA controller for TX missing\n");
++ err = -ENODEV;
++ goto out_free_card;
++ }
++ chip->dma.req_rx.req.dmac = find_dma_controller(0);
++ if (!chip->dma.req_rx.req.dmac) {
++ dev_dbg(&chip->pdev->dev, "DMA controller for RX missing\n");
++ err = -ENODEV;
++ goto out_free_card;
++ }
++
++ chip->dma.rx_periph_id = 3;
++ chip->dma.tx_periph_id = 4;
++
++ ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
++ if (ch < 0) {
++ dev_dbg(&chip->pdev->dev,
++ "could not allocate TX DMA channel\n");
++ err = ch;
++ goto out_free_card;
++ }
++ chip->dma.req_tx.req.channel = ch;
++ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
++ chip->dma.req_tx.req.error = atmel_ac97_error;
++
++ ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
++ if (ch < 0) {
++ dev_dbg(&chip->pdev->dev,
++ "could not allocate RX DMA channel\n");
++ err = ch;
++ goto out_free_card;
++ }
++ chip->dma.req_rx.req.channel = ch;
++ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
++ chip->dma.req_rx.req.error = atmel_ac97_error;
++
++ strcpy(card->driver, "atmel_ac97c");
++ strcpy(card->shortname, "atmel_ac97c");
++ sprintf(card->longname, "Atmel AVR32 AC97 controller");
++
++ err = snd_card_register(card);
++ if (err)
++ goto out_free_card;
++
++ platform_set_drvdata(pdev, card);
++ dev++;
++
++ dev_info(&pdev->dev, "Atmel AVR32 AC97 controller at 0x%p\n",
++ chip->regs);
++
++ return 0;
++
++out_free_card:
++ snd_card_free(card);
++out:
++ return err;
++}
++
++#ifdef CONFIG_PM
++ static int
++snd_atmel_ac97_suspend(struct platform_device *pdev, pm_message_t msg)
++{
++ struct snd_card *card = platform_get_drvdata(pdev);
++ struct atmel_ac97 *chip = card->private_data;
++
++ clk_disable(chip->mck);
++
++ return 0;
++}
++
++static int snd_atmel_ac97_resume(struct platform_device *pdev)
++{
++ struct snd_card *card = dev_get_drvdata(pdev);
++ struct atmel_ac97 *chip = card->private_data;
++
++ clk_enable(chip->mck);
++
++ return 0;
++}
++#else
++#define snd_atmel_ac97_suspend NULL
++#define snd_atmel_ac97_resume NULL
++#endif
++
++static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
++{
++ struct snd_card *card = platform_get_drvdata(pdev);
++
++ snd_card_free(card);
++ platform_set_drvdata(pdev, NULL);
++ return 0;
++}
++
++static struct platform_driver atmel_ac97_driver = {
++ .remove = __devexit_p(snd_atmel_ac97_remove),
++ .driver = {
++ .name = "atmel_ac97c",
++ },
++ .suspend = snd_atmel_ac97_suspend,
++ .resume = snd_atmel_ac97_resume,
++};
++
++static int __init atmel_ac97_init(void)
++{
++ return platform_driver_probe(&atmel_ac97_driver,
++ snd_atmel_ac97_probe);
++}
++module_init(atmel_ac97_init);
++
++static void __exit atmel_ac97_exit(void)
++{
++ platform_driver_unregister(&atmel_ac97_driver);
++}
++module_exit(atmel_ac97_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+diff -Nrup linux-2.6.24/sound/avr32/ac97c.h linux-avr32/sound/avr32/ac97c.h
+--- linux-2.6.24/sound/avr32/ac97c.h 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/sound/avr32/ac97c.h 2008-02-01 14:51:48.000000000 -0500
+@@ -0,0 +1,71 @@
++/*
++ * Register definitions for the Atmel AC97 Controller.
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __SOUND_AVR32_AC97C_H
++#define __SOUND_AVR32_AC97C_H
++
++#define AC97C_MR 0x08
++#define AC97C_ICA 0x10
++#define AC97C_OCA 0x14
++#define AC97C_CARHR 0x20
++#define AC97C_CATHR 0x24
++#define AC97C_CASR 0x28
++#define AC97C_CAMR 0x2c
++#define AC97C_CBRHR 0x30
++#define AC97C_CBTHR 0x34
++#define AC97C_CBSR 0x38
++#define AC97C_CBMR 0x3c
++#define AC97C_CORHR 0x40
++#define AC97C_COTHR 0x44
++#define AC97C_COSR 0x48
++#define AC97C_COMR 0x4c
++#define AC97C_SR 0x50
++#define AC97C_IER 0x54
++#define AC97C_IDR 0x58
++#define AC97C_IMR 0x5c
++#define AC97C_VERSION 0xfc
++
++#define AC97C_CATPR PDC_TPR
++#define AC97C_CATCR PDC_TCR
++#define AC97C_CATNPR PDC_TNPR
++#define AC97C_CATNCR PDC_TNCR
++#define AC97C_CARPR PDC_RPR
++#define AC97C_CARCR PDC_RCR
++#define AC97C_CARNPR PDC_RNPR
++#define AC97C_CARNCR PDC_RNCR
++#define AC97C_PTCR PDC_PTCR
++
++#define AC97C_MR_ENA (1 << 0)
++#define AC97C_MR_WRST (1 << 1)
++#define AC97C_MR_VRA (1 << 2)
++
++#define AC97C_CSR_TXRDY (1 << 0)
++#define AC97C_CSR_UNRUN (1 << 2)
++#define AC97C_CSR_RXRDY (1 << 4)
++#define AC97C_CSR_ENDTX (1 << 10)
++#define AC97C_CSR_ENDRX (1 << 14)
++
++#define AC97C_CMR_SIZE_20 (0 << 16)
++#define AC97C_CMR_SIZE_18 (1 << 16)
++#define AC97C_CMR_SIZE_16 (2 << 16)
++#define AC97C_CMR_SIZE_10 (3 << 16)
++#define AC97C_CMR_CEM_LITTLE (1 << 18)
++#define AC97C_CMR_CEM_BIG (0 << 18)
++#define AC97C_CMR_CENA (1 << 21)
++#define AC97C_CMR_PDCEN (1 << 22)
++
++#define AC97C_SR_CAEVT (1 << 3)
++
++#define AC97C_CH_ASSIGN(slot, channel) \
++ (AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
++#define AC97C_CHANNEL_NONE 0x0
++#define AC97C_CHANNEL_A 0x1
++#define AC97C_CHANNEL_B 0x2
++
++#endif /* __SOUND_AVR32_AC97C_H */
+diff -Nrup linux-2.6.24/sound/avr32/Kconfig linux-avr32/sound/avr32/Kconfig
+--- linux-2.6.24/sound/avr32/Kconfig 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/sound/avr32/Kconfig 2008-02-01 14:51:48.000000000 -0500
+@@ -0,0 +1,11 @@
++menu "AVR32 devices"
++ depends on SND != n && AVR32
++
++config SND_ATMEL_AC97
++ tristate "Atmel AC97 Controller Driver"
++ select SND_PCM
++ select SND_AC97_CODEC
++ help
++ ALSA sound driver for the Atmel AC97 controller.
++
++endmenu
+diff -Nrup linux-2.6.24/sound/avr32/Makefile linux-avr32/sound/avr32/Makefile
+--- linux-2.6.24/sound/avr32/Makefile 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/sound/avr32/Makefile 2008-02-01 14:51:48.000000000 -0500
+@@ -0,0 +1,3 @@
++snd-atmel-ac97-objs := ac97c.o
++
++obj-$(CONFIG_SND_ATMEL_AC97) += snd-atmel-ac97.o
+diff -Nrup linux-2.6.24/sound/Kconfig linux-avr32/sound/Kconfig
+--- linux-2.6.24/sound/Kconfig 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/sound/Kconfig 2008-02-01 14:51:48.000000000 -0500
+@@ -63,6 +63,8 @@ source "sound/aoa/Kconfig"
+
+ source "sound/arm/Kconfig"
+
++source "sound/avr32/Kconfig"
++
+ if SPI
+ source "sound/spi/Kconfig"
+ endif
+diff -Nrup linux-2.6.24/sound/Makefile linux-avr32/sound/Makefile
+--- linux-2.6.24/sound/Makefile 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/sound/Makefile 2008-02-01 14:51:48.000000000 -0500
+@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmw
+ obj-$(CONFIG_SOUND_PRIME) += oss/
+ obj-$(CONFIG_DMASOUND) += oss/
+ obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
+- sparc/ spi/ parisc/ pcmcia/ mips/ soc/
++ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ avr32/
+ obj-$(CONFIG_SND_AOA) += aoa/
+
+ # This one must be compilable even if sound is configured out
+diff -Nrup linux-2.6.24/sound/oss/at32_abdac.c linux-avr32/sound/oss/at32_abdac.c
+--- linux-2.6.24/sound/oss/at32_abdac.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/sound/oss/at32_abdac.c 2008-02-01 14:51:49.000000000 -0500
+@@ -0,0 +1,722 @@
++/*
++ * OSS Sound Driver for the Atmel AT32 on-chip DAC.
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/dma-mapping.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/sound.h>
++#include <linux/soundcard.h>
++
++#include <asm/byteorder.h>
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
++
++/* We want to use the "bizarre" swap-bytes-in-each-halfword macro */
++#include <linux/byteorder/swabb.h>
++
++#include "at32_abdac.h"
++
++#define DMA_BUFFER_SIZE 32768
++#define DMA_PERIOD_SHIFT 10
++#define DMA_PERIOD_SIZE (1 << DMA_PERIOD_SHIFT)
++#define DMA_WRITE_THRESHOLD DMA_PERIOD_SIZE
++
++struct sound_settings {
++ unsigned int format;
++ unsigned int channels;
++ unsigned int sample_rate;
++ /* log2(bytes per sample) */
++ unsigned int input_order;
++};
++
++struct at32_dac {
++ spinlock_t lock;
++ void __iomem *regs;
++
++ /* head and tail refer to number of words */
++ struct {
++ u32 *buf;
++ int head;
++ int tail;
++ } dma;
++
++ struct semaphore sem;
++ wait_queue_head_t write_wait;
++
++ /*
++ * Read at most ucount bytes from ubuf, translate to 2-channel
++ * signed 16-bit big endian format and write to the DMA buffer
++ * as long as there is room left. Return the number of bytes
++ * successfully copied from ubuf, or -EFAULT if the first
++ * sample from ubuf couldn't be read. This function is not
++ * called unless there is room for at least one sample (4
++ * bytes) in the DMA buffer.
++ */
++ ssize_t (*trans)(struct at32_dac *dac, const char __user *ubuf,
++ size_t ucount);
++
++ struct sound_settings dsp_settings;
++ struct dma_request_cyclic req;
++
++ struct clk *mck;
++ struct clk *sample_clk;
++ struct platform_device *pdev;
++ int busy;
++ int playing;
++ int dev_dsp;
++};
++static struct at32_dac *the_dac;
++
++static inline unsigned int abdac_get_head(struct at32_dac *dac)
++{
++ return dac->dma.head & ((DMA_BUFFER_SIZE / 4) - 1);
++}
++
++static inline unsigned int abdac_get_tail(struct at32_dac *dac)
++{
++ return dac->dma.tail & ((DMA_BUFFER_SIZE / 4) - 1);
++}
++
++static inline unsigned int abdac_dma_space(struct at32_dac *dac)
++{
++ unsigned int space;
++
++ space = ((dac->dma.tail - dac->dma.head - 1)
++ & ((DMA_BUFFER_SIZE / 4) - 1));
++ return space;
++}
++
++static void abdac_update_dma_tail(struct at32_dac *dac)
++{
++ dma_addr_t dma_addr;
++ unsigned int new_tail;
++
++ if (dac->playing) {
++ dma_addr = dma_get_current_pos(dac->req.req.dmac,
++ dac->req.req.channel);
++ new_tail = (dma_addr - dac->req.buffer_start) / 4;
++ if (new_tail >= dac->dma.head
++ && (dac->dma.tail < dac->dma.head
++ || dac->dma.tail > new_tail))
++ dev_notice(&dac->pdev->dev, "DMA underrun detected!\n");
++ dac->dma.tail = new_tail;
++ dev_dbg(&dac->pdev->dev, "update tail: 0x%x - 0x%x = %u\n",
++ dma_addr, dac->req.buffer_start, dac->dma.tail);
++ }
++}
++
++static int abdac_start(struct at32_dac *dac)
++{
++ int ret;
++
++ if (dac->playing)
++ return 0;
++
++ memset(dac->dma.buf, 0, DMA_BUFFER_SIZE);
++
++ clk_enable(dac->sample_clk);
++
++ ret = dma_prepare_request_cyclic(dac->req.req.dmac, &dac->req);
++ if (ret)
++ goto out_stop_clock;
++
++ dev_dbg(&dac->pdev->dev, "starting DMA...\n");
++ ret = dma_start_request(dac->req.req.dmac, dac->req.req.channel);
++ if (ret)
++ goto out_stop_request;
++
++ dac_writel(dac, CTRL, DAC_BIT(EN));
++ dac->playing = 1;
++
++ return 0;
++
++out_stop_request:
++ dma_stop_request(dac->req.req.dmac,
++ dac->req.req.channel);
++out_stop_clock:
++ clk_disable(dac->sample_clk);
++ return ret;
++}
++
++static int abdac_stop(struct at32_dac *dac)
++{
++ if (dac->playing) {
++ dma_stop_request(dac->req.req.dmac, dac->req.req.channel);
++ dac_writel(dac, DATA, 0);
++ dac_writel(dac, CTRL, 0);
++ dac->playing = 0;
++ clk_disable(dac->sample_clk);
++ }
++
++ return 0;
++}
++
++static int abdac_dma_prepare(struct at32_dac *dac)
++{
++ dac->dma.buf = dma_alloc_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
++ &dac->req.buffer_start, GFP_KERNEL);
++ if (!dac->dma.buf)
++ return -ENOMEM;
++
++ dac->dma.head = dac->dma.tail = 0;
++ dac->req.periods = DMA_BUFFER_SIZE / DMA_PERIOD_SIZE;
++ dac->req.buffer_size = DMA_BUFFER_SIZE;
++
++ return 0;
++}
++
++static void abdac_dma_cleanup(struct at32_dac *dac)
++{
++ if (dac->dma.buf)
++ dma_free_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
++ dac->dma.buf, dac->req.buffer_start);
++ dac->dma.buf = NULL;
++}
++
++static void abdac_dma_block_complete(struct dma_request *req)
++{
++ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
++ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
++
++ wake_up(&dac->write_wait);
++}
++
++static void abdac_dma_error(struct dma_request *req)
++{
++ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
++ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
++
++ dev_err(&dac->pdev->dev, "DMA error\n");
++}
++
++static irqreturn_t abdac_interrupt(int irq, void *dev_id)
++{
++ struct at32_dac *dac = dev_id;
++ u32 status;
++
++ status = dac_readl(dac, INT_STATUS);
++ if (status & DAC_BIT(UNDERRUN)) {
++ dev_err(&dac->pdev->dev, "Underrun detected!\n");
++ dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN));
++ } else {
++ dev_err(&dac->pdev->dev, "Spurious interrupt (status=0x%x)\n",
++ status);
++ dac_writel(dac, INT_CLR, status);
++ }
++
++ return IRQ_HANDLED;
++}
++
++static ssize_t trans_s16be(struct at32_dac *dac, const char __user *ubuf,
++ size_t ucount)
++{
++ ssize_t ret;
++
++ if (dac->dsp_settings.channels == 2) {
++ const u32 __user *up = (const u32 __user *)ubuf;
++ u32 sample;
++
++ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
++ if (!abdac_dma_space(dac))
++ break;
++
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ dac->dma.buf[abdac_get_head(dac)] = sample;
++ dac->dma.head++;
++ }
++ } else {
++ const u16 __user *up = (const u16 __user *)ubuf;
++ u16 sample;
++
++ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
++ if (!abdac_dma_space(dac))
++ break;
++
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ dac->dma.buf[abdac_get_head(dac)]
++ = (sample << 16) | sample;
++ dac->dma.head++;
++ }
++ }
++
++ return ret;
++}
++
++static ssize_t trans_s16le(struct at32_dac *dac, const char __user *ubuf,
++ size_t ucount)
++{
++ ssize_t ret;
++
++ if (dac->dsp_settings.channels == 2) {
++ const u32 __user *up = (const u32 __user *)ubuf;
++ u32 sample;
++
++ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
++ if (!abdac_dma_space(dac))
++ break;
++
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ /* Swap bytes in each halfword */
++ dac->dma.buf[abdac_get_head(dac)] = swahb32(sample);
++ dac->dma.head++;
++ }
++ } else {
++ const u16 __user *up = (const u16 __user *)ubuf;
++ u16 sample;
++
++ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
++ if (!abdac_dma_space(dac))
++ break;
++
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ sample = swab16(sample);
++ dac->dma.buf[abdac_get_head(dac)]
++ = (sample << 16) | sample;
++ dac->dma.head++;
++ }
++ }
++
++ return ret;
++}
++
++static ssize_t abdac_dma_translate_from_user(struct at32_dac *dac,
++ const char __user *buffer,
++ size_t count)
++{
++ /* At least one buffer must be available at this point */
++ dev_dbg(&dac->pdev->dev, "copying %zu bytes from user...\n", count);
++
++ return dac->trans(dac, buffer, count);
++}
++
++static int abdac_set_format(struct at32_dac *dac, int format)
++{
++ unsigned int order;
++
++ switch (format) {
++ case AFMT_S16_BE:
++ order = 1;
++ dac->trans = trans_s16be;
++ break;
++ case AFMT_S16_LE:
++ order = 1;
++ dac->trans = trans_s16le;
++ break;
++ default:
++ dev_dbg(&dac->pdev->dev, "unsupported format: %d\n", format);
++ return -EINVAL;
++ }
++
++ if (dac->dsp_settings.channels == 2)
++ order++;
++
++ dac->dsp_settings.input_order = order;
++ dac->dsp_settings.format = format;
++ return 0;
++}
++
++static int abdac_set_sample_rate(struct at32_dac *dac, unsigned long rate)
++{
++ unsigned long new_rate;
++ int ret;
++
++ ret = clk_set_rate(dac->sample_clk, 256 * rate);
++ if (ret < 0)
++ return ret;
++
++ /* TODO: mplayer seems to have a problem with this */
++#if 0
++ new_rate = clk_get_rate(dac->sample_clk);
++ dac->dsp_settings.sample_rate = new_rate / 256;
++#else
++ dac->dsp_settings.sample_rate = rate;
++#endif
++
++ return 0;
++}
++
++static ssize_t abdac_dsp_write(struct file *file,
++ const char __user *buffer,
++ size_t count, loff_t *ppos)
++{
++ struct at32_dac *dac = file->private_data;
++ DECLARE_WAITQUEUE(wait, current);
++ unsigned int avail;
++ ssize_t copied;
++ ssize_t ret;
++
++ /* Avoid address space checking in the translation functions */
++ if (!access_ok(buffer, count, VERIFY_READ))
++ return -EFAULT;
++
++ down(&dac->sem);
++
++ if (!dac->dma.buf) {
++ ret = abdac_dma_prepare(dac);
++ if (ret)
++ goto out;
++ }
++
++ add_wait_queue(&dac->write_wait, &wait);
++ ret = 0;
++ while (count > 0) {
++ do {
++ abdac_update_dma_tail(dac);
++ avail = abdac_dma_space(dac);
++ set_current_state(TASK_INTERRUPTIBLE);
++ if (avail >= DMA_WRITE_THRESHOLD)
++ break;
++
++ if (file->f_flags & O_NONBLOCK) {
++ if (!ret)
++ ret = -EAGAIN;
++ goto out;
++ }
++
++ pr_debug("Going to wait (avail = %u, count = %zu)\n",
++ avail, count);
++
++ up(&dac->sem);
++ schedule();
++ if (signal_pending(current)) {
++ if (!ret)
++ ret = -ERESTARTSYS;
++ goto out_nosem;
++ }
++ down(&dac->sem);
++ } while (1);
++
++ copied = abdac_dma_translate_from_user(dac, buffer, count);
++ if (copied < 0) {
++ if (!ret)
++ ret = -EFAULT;
++ goto out;
++ }
++
++ abdac_start(dac);
++
++ count -= copied;
++ ret += copied;
++ }
++
++out:
++ up(&dac->sem);
++out_nosem:
++ remove_wait_queue(&dac->write_wait, &wait);
++ set_current_state(TASK_RUNNING);
++ return ret;
++}
++
++static int abdac_dsp_ioctl(struct inode *inode, struct file *file,
++ unsigned int cmd, unsigned long arg)
++{
++ struct at32_dac *dac = file->private_data;
++ int __user *up = (int __user *)arg;
++ struct audio_buf_info abinfo;
++ int val, ret;
++
++ switch (cmd) {
++ case OSS_GETVERSION:
++ return put_user(SOUND_VERSION, up);
++
++ case SNDCTL_DSP_SPEED:
++ if (get_user(val, up))
++ return -EFAULT;
++ if (val >= 0) {
++ abdac_stop(dac);
++ ret = abdac_set_sample_rate(dac, val);
++ if (ret)
++ return ret;
++ }
++ return put_user(dac->dsp_settings.sample_rate, up);
++
++ case SNDCTL_DSP_STEREO:
++ if (get_user(val, up))
++ return -EFAULT;
++ abdac_stop(dac);
++ if (val && dac->dsp_settings.channels == 1)
++ dac->dsp_settings.input_order++;
++ else if (!val && dac->dsp_settings.channels != 1)
++ dac->dsp_settings.input_order--;
++ dac->dsp_settings.channels = val ? 2 : 1;
++ return 0;
++
++ case SNDCTL_DSP_CHANNELS:
++ if (get_user(val, up))
++ return -EFAULT;
++
++ if (val) {
++ if (val < 0 || val > 2)
++ return -EINVAL;
++
++ abdac_stop(dac);
++ dac->dsp_settings.input_order
++ += val - dac->dsp_settings.channels;
++ dac->dsp_settings.channels = val;
++ }
++ return put_user(val, (int *)arg);
++
++ case SNDCTL_DSP_GETFMTS:
++ return put_user(AFMT_S16_BE | AFMT_S16_BE, up);
++
++ case SNDCTL_DSP_SETFMT:
++ if (get_user(val, up))
++ return -EFAULT;
++
++ if (val == AFMT_QUERY) {
++ val = dac->dsp_settings.format;
++ } else {
++ ret = abdac_set_format(dac, val);
++ if (ret)
++ return ret;
++ }
++ return put_user(val, up);
++
++ case SNDCTL_DSP_GETOSPACE:
++ abdac_update_dma_tail(dac);
++ abinfo.fragsize = ((1 << dac->dsp_settings.input_order)
++ * (DMA_PERIOD_SIZE / 4));
++ abinfo.bytes = (abdac_dma_space(dac)
++ << dac->dsp_settings.input_order);
++ abinfo.fragstotal = ((DMA_BUFFER_SIZE * 4)
++ >> (DMA_PERIOD_SHIFT
++ + dac->dsp_settings.input_order));
++ abinfo.fragments = ((abinfo.bytes
++ >> dac->dsp_settings.input_order)
++ / (DMA_PERIOD_SIZE / 4));
++ pr_debug("fragments=%d fragstotal=%d fragsize=%d bytes=%d\n",
++ abinfo.fragments, abinfo.fragstotal, abinfo.fragsize,
++ abinfo.bytes);
++ return copy_to_user(up, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
++
++ default:
++ dev_dbg(&dac->pdev->dev, "Unimplemented ioctl cmd: 0x%x\n", cmd);
++ return -EINVAL;
++ }
++}
++
++static int abdac_dsp_open(struct inode *inode, struct file *file)
++{
++ struct at32_dac *dac = the_dac;
++ int ret;
++
++ if (file->f_mode & FMODE_READ)
++ return -ENXIO;
++
++ down(&dac->sem);
++ ret = -EBUSY;
++ if (dac->busy)
++ goto out;
++
++ dac->dma.head = dac->dma.tail = 0;
++
++ /* FIXME: What are the correct defaults? */
++ dac->dsp_settings.channels = 2;
++ abdac_set_format(dac, AFMT_S16_BE);
++ ret = abdac_set_sample_rate(dac, 8000);
++ if (ret)
++ goto out;
++
++ file->private_data = dac;
++ dac->busy = 1;
++
++ ret = 0;
++
++out:
++ up(&dac->sem);
++ return ret;
++}
++
++static int abdac_dsp_release(struct inode *inode, struct file *file)
++{
++ struct at32_dac *dac = file->private_data;
++
++ down(&dac->sem);
++
++ abdac_stop(dac);
++ abdac_dma_cleanup(dac);
++ dac->busy = 0;
++
++ up(&dac->sem);
++
++ return 0;
++}
++
++static struct file_operations abdac_dsp_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .write = abdac_dsp_write,
++ .ioctl = abdac_dsp_ioctl,
++ .open = abdac_dsp_open,
++ .release = abdac_dsp_release,
++};
++
++static int __init abdac_probe(struct platform_device *pdev)
++{
++ struct at32_dac *dac;
++ struct resource *regs;
++ struct clk *mck;
++ struct clk *sample_clk;
++ int irq;
++ int ret;
++
++ if (the_dac)
++ return -EBUSY;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ mck = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(mck))
++ return PTR_ERR(mck);
++ sample_clk = clk_get(&pdev->dev, "sample_clk");
++ if (IS_ERR(sample_clk)) {
++ ret = PTR_ERR(sample_clk);
++ goto out_put_mck;
++ }
++ clk_enable(mck);
++
++ ret = -ENOMEM;
++ dac = kzalloc(sizeof(struct at32_dac), GFP_KERNEL);
++ if (!dac)
++ goto out_disable_clk;
++
++ spin_lock_init(&dac->lock);
++ init_MUTEX(&dac->sem);
++ init_waitqueue_head(&dac->write_wait);
++ dac->pdev = pdev;
++ dac->mck = mck;
++ dac->sample_clk = sample_clk;
++
++ dac->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!dac->regs)
++ goto out_free_dac;
++
++ ret = request_irq(irq, abdac_interrupt, 0, "dac", dac);
++ if (ret)
++ goto out_unmap_regs;
++
++ /* FIXME */
++ dac->req.req.dmac = find_dma_controller(0);
++ if (!dac->req.req.dmac)
++ goto out_free_irq;
++
++ ret = dma_alloc_channel(dac->req.req.dmac);
++ if (ret < 0)
++ goto out_free_irq;
++
++ dac->req.req.channel = ret;
++ dac->req.req.block_complete = abdac_dma_block_complete;
++ dac->req.req.error = abdac_dma_error;
++ dac->req.data_reg = regs->start + DAC_DATA;
++ dac->req.periph_id = 2; /* FIXME */
++ dac->req.direction = DMA_DIR_MEM_TO_PERIPH;
++ dac->req.width = DMA_WIDTH_32BIT;
++
++ /* Make sure the DAC is silent and disabled */
++ dac_writel(dac, DATA, 0);
++ dac_writel(dac, CTRL, 0);
++
++ ret = register_sound_dsp(&abdac_dsp_fops, -1);
++ if (ret < 0)
++ goto out_free_dma;
++ dac->dev_dsp = ret;
++
++ /* TODO: Register mixer */
++
++ the_dac = dac;
++ platform_set_drvdata(pdev, dac);
++
++ return 0;
++
++out_free_dma:
++ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
++out_free_irq:
++ free_irq(irq, dac);
++out_unmap_regs:
++ iounmap(dac->regs);
++out_free_dac:
++ kfree(dac);
++out_disable_clk:
++ clk_disable(mck);
++ clk_put(sample_clk);
++out_put_mck:
++ clk_put(mck);
++ return ret;
++}
++
++static int __exit abdac_remove(struct platform_device *pdev)
++{
++ struct at32_dac *dac;
++
++ dac = platform_get_drvdata(pdev);
++ if (dac) {
++ unregister_sound_dsp(dac->dev_dsp);
++ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
++ free_irq(platform_get_irq(pdev, 0), dac);
++ iounmap(dac->regs);
++ clk_disable(dac->mck);
++ clk_put(dac->sample_clk);
++ clk_put(dac->mck);
++ kfree(dac);
++ platform_set_drvdata(pdev, NULL);
++ the_dac = NULL;
++ }
++
++ return 0;
++}
++
++static struct platform_driver abdac_driver = {
++ .remove = __exit_p(abdac_remove),
++ .driver = {
++ .name = "abdac",
++ },
++};
++
++static int __init abdac_init(void)
++{
++ return platform_driver_probe(&abdac_driver, abdac_probe);
++}
++module_init(abdac_init);
++
++static void __exit abdac_exit(void)
++{
++ platform_driver_unregister(&abdac_driver);
++}
++module_exit(abdac_exit);
++
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_DESCRIPTION("Sound Driver for the Atmel AT32 ABDAC");
++MODULE_LICENSE("GPL");
+diff -Nrup linux-2.6.24/sound/oss/at32_abdac.h linux-avr32/sound/oss/at32_abdac.h
+--- linux-2.6.24/sound/oss/at32_abdac.h 1969-12-31 19:00:00.000000000 -0500
++++ linux-avr32/sound/oss/at32_abdac.h 2008-02-01 14:51:49.000000000 -0500
+@@ -0,0 +1,59 @@
++/*
++ * Register definitions for the Atmel AT32 on-chip DAC.
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __SOUND_OSS_AT32_ABDAC_H__
++#define __SOUND_OSS_AT32_ABDAC_H__
++
++/* DAC register offsets */
++#define DAC_DATA 0x0000
++#define DAC_CTRL 0x0008
++#define DAC_INT_MASK 0x000c
++#define DAC_INT_EN 0x0010
++#define DAC_INT_DIS 0x0014
++#define DAC_INT_CLR 0x0018
++#define DAC_INT_STATUS 0x001c
++#define DAC_PDC_DATA 0x0020
++
++/* Bitfields in CTRL */
++#define DAC_SWAP_OFFSET 30
++#define DAC_SWAP_SIZE 1
++#define DAC_EN_OFFSET 31
++#define DAC_EN_SIZE 1
++
++/* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */
++#define DAC_UNDERRUN_OFFSET 28
++#define DAC_UNDERRUN_SIZE 1
++#define DAC_TX_READY_OFFSET 29
++#define DAC_TX_READY_SIZE 1
++#define DAC_TX_BUFFER_EMPTY_OFFSET 30
++#define DAC_TX_BUFFER_EMPTY_SIZE 1
++#define DAC_CHANNEL_TX_END_OFFSET 31
++#define DAC_CHANNEL_TX_END_SIZE 1
++
++/* Bit manipulation macros */
++#define DAC_BIT(name) \
++ (1 << DAC_##name##_OFFSET)
++#define DAC_BF(name, value) \
++ (((value) & ((1 << DAC_##name##_SIZE) - 1)) \
++ << DAC_##name##_OFFSET)
++#define DAC_BFEXT(name, value) \
++ (((value) >> DAC_##name##_OFFSET) \
++ & ((1 << DAC_##name##_SIZE) - 1))
++#define DAC_BFINS(name, value, old) \
++ (((old) & ~(((1 << DAC_##name##_SIZE) - 1) \
++ << DAC_##name##_OFFSET)) \
++ | DAC_BF(name,value))
++
++/* Register access macros */
++#define dac_readl(port, reg) \
++ __raw_readl((port)->regs + DAC_##reg)
++#define dac_writel(port, reg, value) \
++ __raw_writel((value), (port)->regs + DAC_##reg)
++
++#endif /* __SOUND_OSS_AT32_ABDAC_H__ */
+diff -Nrup linux-2.6.24/sound/oss/Kconfig linux-avr32/sound/oss/Kconfig
+--- linux-2.6.24/sound/oss/Kconfig 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/sound/oss/Kconfig 2008-02-01 14:51:49.000000000 -0500
+@@ -654,3 +654,7 @@ config SOUND_SH_DAC_AUDIO_CHANNEL
+ int "DAC channel"
+ default "1"
+ depends on SOUND_SH_DAC_AUDIO
++
++config SOUND_AT32_ABDAC
++ tristate "Atmel AT32 Audio Bitstream DAC (ABDAC) support"
++ depends on SOUND_PRIME && AVR32
+diff -Nrup linux-2.6.24/sound/oss/Makefile linux-avr32/sound/oss/Makefile
+--- linux-2.6.24/sound/oss/Makefile 2008-01-24 17:58:37.000000000 -0500
++++ linux-avr32/sound/oss/Makefile 2008-02-01 14:51:49.000000000 -0500
+@@ -10,6 +10,7 @@ obj-$(CONFIG_SOUND_CS4232) += cs4232.o a
+
+ # Please leave it as is, cause the link order is significant !
+
++obj-$(CONFIG_SOUND_AT32_ABDAC) += at32_abdac.o
+ obj-$(CONFIG_SOUND_SH_DAC_AUDIO) += sh_dac_audio.o
+ obj-$(CONFIG_SOUND_HAL2) += hal2.o
+ obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o
diff --git a/target/device/Atmel/atngw100/kernel-patches/linux-2.6.24-avr32-mmc.patch b/target/device/Atmel/atngw100/kernel-patches/linux-2.6.24-avr32-mmc.patch
new file mode 100644
index 000000000..a7654b5c6
--- /dev/null
+++ b/target/device/Atmel/atngw100/kernel-patches/linux-2.6.24-avr32-mmc.patch
@@ -0,0 +1,255 @@
+diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
+index eeac479..7913cd8 100644
+--- a/drivers/mmc/host/atmel-mci.c
++++ b/drivers/mmc/host/atmel-mci.c
+@@ -39,7 +39,6 @@ enum {
+ EVENT_STOP_COMPLETE,
+ EVENT_DMA_COMPLETE,
+ EVENT_DMA_ERROR,
+- EVENT_CARD_DETECT,
+ };
+
+ struct atmel_mci_dma {
+@@ -70,6 +69,9 @@ struct atmel_mci {
+ int detect_pin;
+ int wp_pin;
+
++ /* For detect pin debouncing */
++ struct timer_list detect_timer;
++
+ unsigned long bus_hz;
+ unsigned long mapbase;
+ struct clk *mck;
+@@ -108,8 +110,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
+ test_bit(EVENT_DMA_COMPLETE, &host->completed_events)
+ #define mci_dma_error_is_complete(host) \
+ test_bit(EVENT_DMA_ERROR, &host->completed_events)
+-#define mci_card_detect_is_complete(host) \
+- test_bit(EVENT_CARD_DETECT, &host->completed_events)
+
+ /* Test and clear bit macros for pending events */
+ #define mci_clear_cmd_is_pending(host) \
+@@ -124,8 +124,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
+ test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
+ #define mci_clear_dma_error_is_pending(host) \
+ test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
+-#define mci_clear_card_detect_is_pending(host) \
+- test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
+
+ /* Test and set bit macros for completed events */
+ #define mci_set_cmd_is_completed(host) \
+@@ -140,8 +138,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
+ test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
+ #define mci_set_dma_error_is_completed(host) \
+ test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
+-#define mci_set_card_detect_is_completed(host) \
+- test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
+
+ /* Set bit macros for completed events */
+ #define mci_set_cmd_complete(host) \
+@@ -158,8 +154,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
+ set_bit(EVENT_DMA_COMPLETE, &host->completed_events)
+ #define mci_set_dma_error_complete(host) \
+ set_bit(EVENT_DMA_ERROR, &host->completed_events)
+-#define mci_set_card_detect_complete(host) \
+- set_bit(EVENT_CARD_DETECT, &host->completed_events)
+
+ /* Set bit macros for pending events */
+ #define mci_set_cmd_pending(host) \
+@@ -174,8 +168,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
+ set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
+ #define mci_set_dma_error_pending(host) \
+ set_bit(EVENT_DMA_ERROR, &host->pending_events)
+-#define mci_set_card_detect_pending(host) \
+- set_bit(EVENT_CARD_DETECT, &host->pending_events)
+
+ /* Clear bit macros for pending events */
+ #define mci_clear_cmd_pending(host) \
+@@ -190,8 +182,6 @@ MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
+ clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
+ #define mci_clear_dma_error_pending(host) \
+ clear_bit(EVENT_DMA_ERROR, &host->pending_events)
+-#define mci_clear_card_detect_pending(host) \
+- clear_bit(EVENT_CARD_DETECT, &host->pending_events)
+
+
+ #ifdef CONFIG_DEBUG_FS
+@@ -560,6 +550,21 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+ mci_readl(host, IMR));
+
+ WARN_ON(host->mrq != NULL);
++
++ /*
++ * We may "know" the card is gone even though there's still an
++ * electrical connection. If so, we really need to communicate
++ * this to the MMC core since there won't be any more
++ * interrupts as the card is completely removed. Otherwise,
++ * the MMC core might believe the card is still there even
++ * though the card was just removed very slowly.
++ */
++ if (!host->present) {
++ mrq->cmd->error = -ENOMEDIUM;
++ mmc_request_done(mmc, mrq);
++ return;
++ }
++
+ host->mrq = mrq;
+ host->pending_events = 0;
+ host->completed_events = 0;
+@@ -729,6 +734,61 @@ static void atmci_command_complete(struct atmel_mci *host,
+ }
+ }
+
++static void atmci_detect_change(unsigned long data)
++{
++ struct atmel_mci *host = (struct atmel_mci *)data;
++ struct mmc_request *mrq = host->mrq;
++ int present;
++
++ /*
++ * atmci_remove() sets detect_pin to -1 before freeing the
++ * interrupt. We must not re-enable the interrupt if it has
++ * been freed.
++ */
++ smp_rmb();
++ if (host->detect_pin < 0)
++ return;
++
++ enable_irq(gpio_to_irq(host->detect_pin));
++ present = !gpio_get_value(host->detect_pin);
++
++ dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n",
++ present, host->present);
++
++ if (present != host->present) {
++ dev_dbg(&host->mmc->class_dev, "card %s\n",
++ present ? "inserted" : "removed");
++ host->present = present;
++
++ /* Reset controller if card is gone */
++ if (!present) {
++ mci_writel(host, CR, MCI_BIT(SWRST));
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CR, MCI_BIT(MCIEN));
++ }
++
++ /* Clean up queue if present */
++ if (mrq) {
++ if (!mci_cmd_is_complete(host))
++ mrq->cmd->error = -ENOMEDIUM;
++ if (mrq->data && !mci_data_is_complete(host)
++ && !mci_data_error_is_complete(host)) {
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++ host->data->error = -ENOMEDIUM;
++ atmci_data_complete(host, host->data);
++ }
++ if (mrq->stop && !mci_stop_is_complete(host))
++ mrq->stop->error = -ENOMEDIUM;
++
++ host->cmd = NULL;
++ atmci_request_end(host->mmc, mrq);
++ }
++
++ mmc_detect_change(host->mmc, 0);
++ }
++}
++
+ static void atmci_tasklet_func(unsigned long priv)
+ {
+ struct mmc_host *mmc = (struct mmc_host *)priv;
+@@ -806,33 +866,6 @@ static void atmci_tasklet_func(unsigned long priv)
+ data->bytes_xfered = data->blocks * data->blksz;
+ atmci_data_complete(host, data);
+ }
+- if (mci_clear_card_detect_is_pending(host)) {
+- /* Reset controller if card is gone */
+- if (!host->present) {
+- mci_writel(host, CR, MCI_BIT(SWRST));
+- mci_writel(host, IDR, ~0UL);
+- mci_writel(host, CR, MCI_BIT(MCIEN));
+- }
+-
+- /* Clean up queue if present */
+- if (mrq) {
+- if (!mci_cmd_is_complete(host))
+- mrq->cmd->error = -ETIMEDOUT;
+- if (mrq->data && !mci_data_is_complete(host)
+- && !mci_data_error_is_complete(host)) {
+- dma_stop_request(host->dma.req.req.dmac,
+- host->dma.req.req.channel);
+- host->data->error = -ETIMEDOUT;
+- atmci_data_complete(host, data);
+- }
+- if (mrq->stop && !mci_stop_is_complete(host))
+- mrq->stop->error = -ETIMEDOUT;
+-
+- host->cmd = NULL;
+- atmci_request_end(mmc, mrq);
+- }
+- mmc_detect_change(host->mmc, msecs_to_jiffies(100));
+- }
+ }
+
+ static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
+@@ -957,20 +990,19 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id)
+ return IRQ_HANDLED;
+ }
+
+-static irqreturn_t atmci_detect_change(int irq, void *dev_id)
++static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
+ {
+ struct mmc_host *mmc = dev_id;
+ struct atmel_mci *host = mmc_priv(mmc);
+
+- int present = !gpio_get_value(irq_to_gpio(irq));
++ /*
++ * Disable interrupts until the pin has stabilized and check
++ * the state then. Use mod_timer() since we may be in the
++ * middle of the timer routine when this interrupt triggers.
++ */
++ disable_irq_nosync(irq);
++ mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20));
+
+- if (present != host->present) {
+- dev_dbg(&mmc->class_dev, "card %s\n",
+- present ? "inserted" : "removed");
+- host->present = present;
+- mci_set_card_detect_pending(host);
+- tasklet_schedule(&host->tasklet);
+- }
+ return IRQ_HANDLED;
+ }
+
+@@ -1079,8 +1111,11 @@ static int __devinit atmci_probe(struct platform_device *pdev)
+ mmc_add_host(mmc);
+
+ if (host->detect_pin >= 0) {
++ setup_timer(&host->detect_timer, atmci_detect_change,
++ (unsigned long)host);
++
+ ret = request_irq(gpio_to_irq(host->detect_pin),
+- atmci_detect_change,
++ atmci_detect_interrupt,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ DRIVER_NAME, mmc);
+ if (ret) {
+@@ -1125,9 +1160,16 @@ static int __devexit atmci_remove(struct platform_device *pdev)
+ atmci_cleanup_debugfs(host);
+
+ if (host->detect_pin >= 0) {
+- free_irq(gpio_to_irq(host->detect_pin), host->mmc);
++ int pin = host->detect_pin;
++
++ /* Make sure our timer doesn't enable the interrupt */
++ host->detect_pin = -1;
++ smp_wmb();
++
++ free_irq(gpio_to_irq(pin), host->mmc);
++ del_timer_sync(&host->detect_timer);
+ cancel_delayed_work(&host->mmc->detect);
+- gpio_free(host->detect_pin);
++ gpio_free(pin);
+ }
+
+ mmc_remove_host(host->mmc);