summaryrefslogtreecommitdiff
path: root/target/device/Atmel/u-boot
diff options
context:
space:
mode:
Diffstat (limited to 'target/device/Atmel/u-boot')
-rw-r--r--target/device/Atmel/u-boot/Config.in115
-rw-r--r--target/device/Atmel/u-boot/u-boot-1.3.0-100-atmel.2.patch.bad (renamed from target/device/Atmel/u-boot/u-boot-1.3.0-100-atmel.2.patch)0
-rw-r--r--target/device/Atmel/u-boot/u-boot-1.3.0.mk.bad149
-rw-r--r--target/device/Atmel/u-boot/u-boot.mk367
4 files changed, 427 insertions, 204 deletions
diff --git a/target/device/Atmel/u-boot/Config.in b/target/device/Atmel/u-boot/Config.in
index edefb52bb..62988ebe4 100644
--- a/target/device/Atmel/u-boot/Config.in
+++ b/target/device/Atmel/u-boot/Config.in
@@ -1,103 +1,44 @@
-config BR2_TARGET_U_BOOT
- bool "u-boot"
+config BR2_TARGET_UBOOT
+ bool "Das U-Boot Boot Monitor"
+ depends on BR2_TARGET_AT91
+ depends on !BR2_TARGET_AT91SAM9260PF
default n
- depends on BR2_avr32 || BR2_arm || BR2_armeb || BR2_i386 || BR2_powerpc || BR2_m68k || BR2_mips || BR2_nios2
help
- U-Boot, the universal boot loader for multiple platforms and target
- boards.
+ Build "Das U-Boot" Boot Monitor
- http://www.denx.de/wiki/UBoot/
-
-config BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE
- string "U-Boot config header file"
- depends on BR2_TARGET_U_BOOT
- help
- Set this variable to a file containing a U-Boot configuration for the
- target board. This file will be copied into the U-Boot directory
- include/configs.
-
-config BR2_TARGET_U_BOOT_CONFIG_BOARD
- string "U-Boot target board configuration"
- depends on BR2_TARGET_U_BOOT
+config BR2_TARGET_UBOOT_SERVERIP
+ string "server ip"
+ depends on BR2_TARGET_UBOOT
+ default "10.175.196.221"
help
- Set this variable to the target board you want to configure U-Boot
- for. This will use the default options for this board in U-Boot and
- build accordingly.
-
- For example "atstk1002_config" for ATSTK1000 with ATSTK1002 top
- module for the AVR32 starter kit.
+ TFTP server ip address
-config BR2_TARGET_U_BOOT_SERVERIP
- string "Server IP"
- depends on BR2_TARGET_U_BOOT
- default "192.168.0.1"
+config BR2_TARGET_UBOOT_IPADDR
+ string "ip address"
+ depends on BR2_TARGET_UBOOT
+ default "10.175.196.18"
help
- The IP address for the remote server providing TFTP services.
+ TFTP server ip address
-config BR2_TARGET_U_BOOT_IPADDR
- string "Target IP address"
- depends on BR2_TARGET_U_BOOT
- default "192.168.0.42"
+config BR2_TARGET_UBOOT_GATEWAY
+ string "gateway ip"
+ depends on BR2_TARGET_UBOOT
+ default "10.175.196.1"
help
- Target board IP address, only set this if you intend to use a fixed
- address (i.e. no DHCP). A blanc target IP address will allow the
- board to use DHCP.
+ Gateway ip address
-config BR2_TARGET_U_BOOT_GATEWAY
- string "Gateway IP"
- depends on BR2_TARGET_U_BOOT && BR2_TARGET_U_BOOT_IPADDR != ""
- default "192.168.0.1"
- help
- Set the gateway IP address if you need to connect to a machine
- outside the netmask for the network.
-
-config BR2_TARGET_U_BOOT_NETMASK
+config BR2_TARGET_UBOOT_NETMASK
string "netmask"
- depends on BR2_TARGET_U_BOOT && BR2_TARGET_U_BOOT_IPADDR != ""
+ depends on BR2_TARGET_UBOOT
default "255.255.255.0"
help
- Network mask for the target board network.
-
-config BR2_TARGET_U_BOOT_ETH0ADDR
- string "Ethernet 0 address"
- depends on BR2_TARGET_U_BOOT
- help
- Target board MAC address for interface 0. You should have a MAC
- address range provided by the company who made you MAC hardware.
-
-config BR2_TARGET_U_BOOT_ETH1ADDR
- string "Ethernet 1 address"
- depends on BR2_TARGET_U_BOOT
- help
- Target board MAC address for interface 1. You should have a MAC
- address range provided by the company who made you MAC hardware.
-
-config BR2_TARGET_U_BOOT_BOOTARGS
- string "Boot arguments"
- depends on BR2_TARGET_U_BOOT
- default "console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2"
- help
- Set the boot arguments in U-Boot to let it boot the way you prefer by
- default. Typoes here will result in a non-booting target board.
-
- Example booting from MMC/SD-card:
- console=ttyS0 root=/dev/mmcblk0p1
-
- Example booting from flash devices (NOR, NAND, DataFlash, etc):
- console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2
+ Network Mask
-config BR2_TARGET_U_BOOT_BOOTCMD
- string "Boot command"
- depends on BR2_TARGET_U_BOOT
- default "fsload /boot/$(LINUX26_FORMAT); bootm"
+config BR2_TARGET_UBOOT_ETHADDR
+ string "Ethernet address"
+ depends on BR2_TARGET_UBOOT
+ default "04:25:fe:ed:00:18"
help
- Set the boot command in U-Boot which specifies how U-Boot should load
- your kernel image, or if you want to do other commands automatically
- when U-Boot starts.
+ Target ip address, this should be changed for production units
- Loading a kernel from MMC/SD-card:
- mmcinit; ext2load mmc 0:1 <RAM address>
- /boot/$(BR2_PACKAGE_LINUX_FORMAT); bootm
- Loading a kernel from flash devices (NOR, NAND, DataFlash, etc):
- fsload <RAM address> /boot/$(BR2_PACKAGE_LINUX_FORMAT); bootm
diff --git a/target/device/Atmel/u-boot/u-boot-1.3.0-100-atmel.2.patch b/target/device/Atmel/u-boot/u-boot-1.3.0-100-atmel.2.patch.bad
index a6d484b2d..a6d484b2d 100644
--- a/target/device/Atmel/u-boot/u-boot-1.3.0-100-atmel.2.patch
+++ b/target/device/Atmel/u-boot/u-boot-1.3.0-100-atmel.2.patch.bad
diff --git a/target/device/Atmel/u-boot/u-boot-1.3.0.mk.bad b/target/device/Atmel/u-boot/u-boot-1.3.0.mk.bad
new file mode 100644
index 000000000..59ba37cd9
--- /dev/null
+++ b/target/device/Atmel/u-boot/u-boot-1.3.0.mk.bad
@@ -0,0 +1,149 @@
+#############################################################
+#
+# U-Boot
+#
+#############################################################
+U_BOOT_VERSION:=1.3.0
+U_BOOT_SOURCE:=u-boot-$(U_BOOT_VERSION).tar.bz2
+U_BOOT_SITE:=ftp://ftp.denx.de/pub/u-boot
+U_BOOT_DIR:=$(PROJECT_BUILD_DIR)/u-boot-$(U_BOOT_VERSION)
+U_BOOT_CAT:=$(BZCAT)
+U_BOOT_BIN:=u-boot.bin
+U_BOOT_TOOLS_BIN:=mkimage
+
+U_BOOT_INC_CONF_FILE:=$(U_BOOT_DIR)/include/configs/$(subst _config,,$(BR2_TARGET_U_BOOT_CONFIG_BOARD)).h
+
+$(DL_DIR)/$(U_BOOT_SOURCE):
+ $(WGET) -P $(DL_DIR) $(U_BOOT_SITE)/$(U_BOOT_SOURCE)
+
+$(U_BOOT_DIR)/.unpacked: $(DL_DIR)/$(U_BOOT_SOURCE)
+ $(U_BOOT_CAT) $(DL_DIR)/$(U_BOOT_SOURCE) \
+ | tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) -
+ toolchain/patch-kernel.sh $(U_BOOT_DIR) target/device/Atmel/u-boot/ \
+ u-boot-$(U_BOOT_VERSION)-\*.patch\*
+ touch $@
+
+$(U_BOOT_DIR)/.header_copied: $(U_BOOT_DIR)/.unpacked
+ifneq ($(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE),"")
+ @if [ ! -f "$(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)" ]; then \
+ echo " You specified BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE,"; \
+ echo " but the file at:"; \
+ echo " '$(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)'"; \
+ echo " does not exist."; \
+ echo; \
+ echo " Configure the BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE variable."; \
+ echo; \
+ exit 1; \
+ fi
+ cp -dpf $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE) $(U_BOOT_INC_CONF_FILE)
+endif
+ touch $@
+
+$(U_BOOT_DIR)/.configured: $(U_BOOT_DIR)/.header_copied
+ifeq ($(strip $(BR2_TARGET_U_BOOT_CONFIG_BOARD)),"")
+ @echo
+ @echo " You did not specify a target u-boot config board, so u-boot"
+ @echo " has no way of knowing which board you want to build your"
+ @echo " bootloader for."
+ @echo
+ @echo " Configure the BR2_TARGET_U_BOOT_CONFIG_BOARD variable."
+ @echo
+ @exit 1
+endif
+ $(TARGET_CONFIGURE_OPTS) \
+ CFLAGS="$(TARGET_CFLAGS)" \
+ LDFLAGS="$(TARGET_LDFLAGS)" \
+ $(MAKE) -C $(U_BOOT_DIR) \
+ $(BR2_TARGET_U_BOOT_CONFIG_BOARD)
+ touch $@
+
+$(U_BOOT_DIR)/.header_modified: $(U_BOOT_DIR)/.configured
+ # Modify configuration header in $(U_BOOT_INC_CONF_FILE)
+ @echo >> $(U_BOOT_INC_CONF_FILE)
+ @echo "/* Add a wrapper around the values Buildroot sets. */" >> $(U_BOOT_INC_CONF_FILE)
+ @echo "#ifndef __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
+ @echo "#define __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
+ifneq ($(strip $(BR2_PROJECT)),"")
+ @echo "#define CONFIG_HOSTNAME" >> $(U_BOOT_INC_CONF_FILE)
+ $(SED) 's,^#define.*CONFIG_HOSTNAME.*,#define CONFIG_HOSTNAME $(subst ",,$(BR2_PROJECT)),' $(U_BOOT_INC_CONF_FILE)
+endif
+ifneq ($(strip $(BR2_TARGET_U_BOOT_SERVERIP)),"")
+ @echo "#define CONFIG_SERVERIP" >> $(U_BOOT_INC_CONF_FILE)
+ $(SED) 's,^#define.*CONFIG_SERVERIP.*,#define CONFIG_SERVERIP $(subst ",,$(BR2_TARGET_U_BOOT_SERVERIP)),' $(U_BOOT_INC_CONF_FILE)
+endif
+ifneq ($(strip $(BR2_TARGET_U_BOOT_IPADDR)),"")
+ @echo "#define CONFIG_IPADDR" >> $(U_BOOT_INC_CONF_FILE)
+ $(SED) 's,^#define.*CONFIG_IPADDR.*,#define CONFIG_IPADDR $(subst ",,$(BR2_TARGET_U_BOOT_IPADDR)),' $(U_BOOT_INC_CONF_FILE)
+ifneq ($(strip $(BR2_TARGET_U_BOOT_GATEWAY)),"")
+ @echo "#define CONFIG_GATEWAYIP" >> $(U_BOOT_INC_CONF_FILE)
+ $(SED) 's,^#define.*CONFIG_GATEWAYIP.*,#define CONFIG_GATEWAYIP $(subst ",,$(BR2_TARGET_U_BOOT_GATEWAY)),' $(U_BOOT_INC_CONF_FILE)
+endif
+ifneq ($(strip $(BR2_TARGET_U_BOOT_NETMASK)),"")
+ @echo "#define CONFIG_NETMASK" >> $(U_BOOT_INC_CONF_FILE)
+ $(SED) 's,^#define.*CONFIG_NETMASK.*,#define CONFIG_NETMASK $(subst ",,$(BR2_TARGET_U_BOOT_NETMASK)),' $(U_BOOT_INC_CONF_FILE)
+endif
+endif # end BR2_TARGET_U_BOOT_IPADDR
+ifneq ($(strip $(BR2_TARGET_U_BOOT_ETH0ADDR)),"")
+ @echo "#define CONFIG_ETHADDR" >> $(U_BOOT_INC_CONF_FILE)
+ $(SED) 's,^#define.*CONFIG_ETHADDR.*,#define CONFIG_ETHADDR $(subst ",,$(BR2_TARGET_U_BOOT_ETH0ADDR)),' $(U_BOOT_INC_CONF_FILE)
+endif
+ifneq ($(strip $(BR2_TARGET_U_BOOT_ETH1ADDR)),"")
+ @echo "#define CONFIG_ETH1ADDR" >> $(U_BOOT_INC_CONF_FILE)
+ $(SED) 's,^#define.*CONFIG_ETH1ADDR.*,#define CONFIG_ETH1ADDR $(subst ",,$(BR2_TARGET_U_BOOT_ETH1ADDR)),' $(U_BOOT_INC_CONF_FILE)
+endif
+ifneq ($(strip $(BR2_TARGET_U_BOOT_BOOTARGS)),"")
+ @echo "#undef CONFIG_BOOTARGS" >> $(U_BOOT_INC_CONF_FILE)
+ @echo '#define CONFIG_BOOTARGS $(BR2_TARGET_U_BOOT_BOOTARGS)' >> $(U_BOOT_INC_CONF_FILE)
+endif
+ifneq ($(strip $(BR2_TARGET_U_BOOT_BOOTCMD)),"")
+ @echo "#undef CONFIG_BOOTCOMMAND" >> $(U_BOOT_INC_CONF_FILE)
+ @echo '#define CONFIG_BOOTCOMMAND $(BR2_TARGET_U_BOOT_BOOTCMD)' >> $(U_BOOT_INC_CONF_FILE)
+endif
+ @echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(U_BOOT_INC_CONF_FILE)
+ touch $@
+
+$(U_BOOT_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/.header_modified
+ $(TARGET_CONFIGURE_OPTS) \
+ CFLAGS="$(TARGET_CFLAGS)" \
+ LDFLAGS="$(TARGET_LDFLAGS)" \
+ $(MAKE) -C $(U_BOOT_DIR)
+
+$(BINARIES_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/$(U_BOOT_BIN)
+ cp -dpf $(U_BOOT_DIR)/$(U_BOOT_BIN) $(BINARIES_DIR)
+ cp -dpf $(U_BOOT_DIR)/tools/$(U_BOOT_TOOLS_BIN) $(STAGING_DIR)/usr/bin/
+
+u-boot: gcc $(BINARIES_DIR)/$(U_BOOT_BIN)
+
+u-boot-clean:
+ $(MAKE) -C $(U_BOOT_DIR) clean
+
+u-boot-dirclean:
+ rm -rf $(U_BOOT_DIR)
+
+u-boot-source: $(DL_DIR)/$(U_BOOT_SOURCE)
+
+#############################################################
+#
+# Toplevel Makefile options
+#
+#############################################################
+ifeq ($(strip $(BR2_TARGET_U_BOOT)),y)
+TARGETS+=u-boot
+endif
+
+u-boot-status:
+ @echo
+ @echo U_BOOT_INC_CONF_FILE = $(U_BOOT_INC_CONF_FILE)
+ @echo
+ @echo BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE = $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)
+ @echo BR2_TARGET_U_BOOT_CONFIG_BOARD = $(BR2_TARGET_U_BOOT_CONFIG_BOARD)
+ @echo BR2_TARGET_U_BOOT_SERVERIP = $(BR2_TARGET_U_BOOT_SERVERIP)
+ @echo BR2_TARGET_U_BOOT_IPADDR = $(BR2_TARGET_U_BOOT_IPADDR)
+ @echo BR2_TARGET_U_BOOT_GATEWAY = $(BR2_TARGET_U_BOOT_GATEWAY)
+ @echo BR2_TARGET_U_BOOT_NETMASK = $(BR2_TARGET_U_BOOT_NETMASK)
+ @echo BR2_TARGET_U_BOOT_ETH0ADDR = $(BR2_TARGET_U_BOOT_ETH0ADDR)
+ @echo BR2_TARGET_U_BOOT_ETH1ADDR = $(BR2_TARGET_U_BOOT_ETH1ADDR)
+ @echo BR2_TARGET_U_BOOT_BOOTARGS = $(BR2_TARGET_U_BOOT_BOOTARGS)
+ @echo BR2_TARGET_U_BOOT_BOOTCMD = $(BR2_TARGET_U_BOOT_BOOTCMD)
+ @echo
+ @exit 0
diff --git a/target/device/Atmel/u-boot/u-boot.mk b/target/device/Atmel/u-boot/u-boot.mk
index 59ba37cd9..474359e19 100644
--- a/target/device/Atmel/u-boot/u-boot.mk
+++ b/target/device/Atmel/u-boot/u-boot.mk
@@ -1,149 +1,282 @@
#############################################################
#
-# U-Boot
+# u-boot mkimage to build to target u-boot filesystems and
+#
+# u-boot.bin - the boot loader for the target - which needs soft float, so
+# we won't make it.
+#
#
#############################################################
-U_BOOT_VERSION:=1.3.0
-U_BOOT_SOURCE:=u-boot-$(U_BOOT_VERSION).tar.bz2
-U_BOOT_SITE:=ftp://ftp.denx.de/pub/u-boot
-U_BOOT_DIR:=$(PROJECT_BUILD_DIR)/u-boot-$(U_BOOT_VERSION)
-U_BOOT_CAT:=$(BZCAT)
-U_BOOT_BIN:=u-boot.bin
-U_BOOT_TOOLS_BIN:=mkimage
-
-U_BOOT_INC_CONF_FILE:=$(U_BOOT_DIR)/include/configs/$(subst _config,,$(BR2_TARGET_U_BOOT_CONFIG_BOARD)).h
-
-$(DL_DIR)/$(U_BOOT_SOURCE):
- $(WGET) -P $(DL_DIR) $(U_BOOT_SITE)/$(U_BOOT_SOURCE)
-
-$(U_BOOT_DIR)/.unpacked: $(DL_DIR)/$(U_BOOT_SOURCE)
- $(U_BOOT_CAT) $(DL_DIR)/$(U_BOOT_SOURCE) \
- | tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) -
- toolchain/patch-kernel.sh $(U_BOOT_DIR) target/device/Atmel/u-boot/ \
- u-boot-$(U_BOOT_VERSION)-\*.patch\*
+UBOOT_VERSION:=1.2.0-atmel
+ATMEL_MIRROR:=$(strip $(subst ",, $(BR2_ATMEL_MIRROR)))
+#"))
+UBOOT_DIR:=$(BUILD_DIR)/u-boot-$(UBOOT_VERSION)
+UBOOT_BUILD_DIR:=$(PROJECT_BUILD_DIR)/u-boot-$(UBOOT_VERSION)
+UBOOT_SOURCE:=u-boot-$(UBOOT_VERSION).tar.bz2
+#UBOOT_SOURCE:=u-boot-1.1.5-atmel.tar.bz2
+#UBOOT_SITE:=http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/u-boot
+UBOOT_SITE:=$(ATMEL_MIRROR)
+UBOOT_PATCH_SITE:=$(ATMEL_MIRROR)
+UBOOT_CAT:=$(BZCAT)
+UBOOT_PATCH_SOURCE:=u-boot-1.2.0-atmel-patch.tar.bz2
+
+MKIMAGE_BINLOC:=$(UBOOT_BUILD_DIR)/tools/mkimage
+MKIMAGE:=$(KERNEL_CROSS)mkimage
+
+UBOOT_BIN:=$(BOARD_NAME)-u-boot-$(UBOOT_VERSION)-$(DATE).bin
+
+UBOOT_PATCHES:=$(PROJECT_BUILD_DIR)/u-boot-patches
+
+UBOOT_ATMEL_BMP:=$(UBOOT_PATCHES)/atmel.bmp
+
+UBOOT_SCR=$(BINARIES_DIR)/autoscript
+TARGET_UBOOT_IPADDR:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_IPADDR)))
+#"))
+TARGET_UBOOT_SERVERIP:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_SERVERIP)))
+#"))
+TARGET_UBOOT_GATEWAY:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_GATEWAY)))
+#"))
+TARGET_UBOOT_NETMASK:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_NETMASK)))
+#"))
+TARGET_UBOOT_ETHADDR:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_ETHADDR)))
+#"))
+UBOOT_CUSTOM:=$(UBOOT_DIR)/include/custom.h
+
+$(DL_DIR)/$(UBOOT_SOURCE):
+ $(WGET) -P $(DL_DIR) $(UBOOT_SITE)/$(UBOOT_SOURCE)
+
+$(DL_DIR)/$(UBOOT_PATCH_SOURCE):
+ $(WGET) -P $(DL_DIR) $(UBOOT_PATCH_SITE)/$(UBOOT_PATCH_SOURCE)
+
+$(UBOOT_DIR)/.unpacked: $(DL_DIR)/$(UBOOT_SOURCE)
+ mkdir -p $(BUILD_DIR)
+ $(UBOOT_CAT) $(DL_DIR)/$(UBOOT_SOURCE) | tar -C $(BUILD_DIR) -xvf -
touch $@
-$(U_BOOT_DIR)/.header_copied: $(U_BOOT_DIR)/.unpacked
-ifneq ($(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE),"")
- @if [ ! -f "$(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)" ]; then \
- echo " You specified BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE,"; \
- echo " but the file at:"; \
- echo " '$(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)'"; \
- echo " does not exist."; \
- echo; \
- echo " Configure the BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE variable."; \
- echo; \
- exit 1; \
- fi
- cp -dpf $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE) $(U_BOOT_INC_CONF_FILE)
-endif
+$(UBOOT_PATCHES)/.unpacked: $(DL_DIR)/$(UBOOT_PATCH_SOURCE)
+ mkdir -p $(UBOOT_PATCHES)
+ bzcat $(DL_DIR)/$(UBOOT_PATCH_SOURCE) | tar -C $(UBOOT_PATCHES) -xvf -
touch $@
-$(U_BOOT_DIR)/.configured: $(U_BOOT_DIR)/.header_copied
-ifeq ($(strip $(BR2_TARGET_U_BOOT_CONFIG_BOARD)),"")
- @echo
- @echo " You did not specify a target u-boot config board, so u-boot"
- @echo " has no way of knowing which board you want to build your"
- @echo " bootloader for."
- @echo
- @echo " Configure the BR2_TARGET_U_BOOT_CONFIG_BOARD variable."
- @echo
- @exit 1
+$(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE): $(UBOOT_DIR)/.unpacked $(UBOOT_PATCHES)/.unpacked
+ toolchain/patch-kernel.sh $(UBOOT_DIR) $(UBOOT_PATCHES) \*.patch
+ touch $(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE)
+# cp $(UBOOT_CONFIG_FILE) $(UBOOT_DIR)/include/configs/.
+# cp $(UBOOT_PATCHES)/cmd_defenv.c $(UBOOT_DIR)/common/.
+# cp $(UBOOT_ATMEL_BMP) $(UBOOT_DIR)/tools/logos/.
+
+$(UBOOT_BUILD_DIR)/.configured: $(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE)
+ifneq ($(strip $(UBOOT_CONFIG_FILE)),)
+ cp $(UBOOT_CONFIG_FILE) $(UBOOT_DIR)/include/configs/.
endif
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- LDFLAGS="$(TARGET_LDFLAGS)" \
- $(MAKE) -C $(U_BOOT_DIR) \
- $(BR2_TARGET_U_BOOT_CONFIG_BOARD)
- touch $@
+ $(MAKE) \
+ O=$(UBOOT_BUILD_DIR) \
+ CONFIG_NOSOFTFLOAT=1 \
+ -C $(UBOOT_DIR) \
+ $(UBOOT_CONFIG)
+ $(SED) 's/ $$(SREC) $$(BIN)//' $(UBOOT_DIR)/examples/Makefile
+ touch $(UBOOT_BUILD_DIR)/.configured
+# $(MAKE) O=$(UBOOT_BUILD_DIR) -C $(UBOOT_DIR)
+
+$(MKIMAGE_BINLOC): $(UBOOT_BUILD_DIR)/.configured
+ $(MAKE) \
+ O=$(UBOOT_BUILD_DIR) \
+ CROSS_COMPILE= \
+ CONFIG_NOSOFTFLOAT=1 \
+ TOPDIR=$(UBOOT_DIR) \
+ SRCTREE=$(UBOOT_DIR) \
+ -C $(UBOOT_DIR) tools
+ touch $(MKIMAGE_BINLOC)
+
+$(UBOOT_BUILD_DIR)/u-boot.bin: $(UBOOT_BUILD_DIR)/.configured $(UBOOT_CUSTOM)
+ echo TARGET_CROSS=$(TARGET_CROSS)
+ $(MAKE) O=$(UBOOT_BUILD_DIR) \
+ CROSS_COMPILE=$(TARGET_CROSS) \
+ CONFIG_NOSOFTFLOAT=1 \
+ TOPDIR=$(UBOOT_DIR) \
+ SRCTREE=$(UBOOT_DIR) \
+ TFTPBOOT=/tftpboot \
+ -C $(UBOOT_DIR)
+
+$(BINARIES_DIR)/$(UBOOT_BIN): $(UBOOT_BUILD_DIR)/u-boot.bin
+ mkdir -p $(BINARIES_DIR)
+ cp $(UBOOT_BUILD_DIR)/u-boot.bin $(BINARIES_DIR)/$(UBOOT_BIN)
+
+/tftpboot/$(UBOOT_BIN): $(UBOOT_BUILD_DIR)/u-boot.bin
+ mkdir -p /tftpboot
+ cp $(UBOOT_BUILD_DIR)/u-boot.bin /tftpboot/$(UBOOT_BIN)
-$(U_BOOT_DIR)/.header_modified: $(U_BOOT_DIR)/.configured
- # Modify configuration header in $(U_BOOT_INC_CONF_FILE)
- @echo >> $(U_BOOT_INC_CONF_FILE)
- @echo "/* Add a wrapper around the values Buildroot sets. */" >> $(U_BOOT_INC_CONF_FILE)
- @echo "#ifndef __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
- @echo "#define __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
-ifneq ($(strip $(BR2_PROJECT)),"")
- @echo "#define CONFIG_HOSTNAME" >> $(U_BOOT_INC_CONF_FILE)
- $(SED) 's,^#define.*CONFIG_HOSTNAME.*,#define CONFIG_HOSTNAME $(subst ",,$(BR2_PROJECT)),' $(U_BOOT_INC_CONF_FILE)
+uboot-bin: $(BINARIES_DIR)/$(UBOOT_BIN) /tftpboot/$(UBOOT_BIN)
+
+$(UBOOT_CUSTOM).test: .config $(UBOOT_BUILD_DIR)/.configured
+ echo "/* Automatically generated file, do not edit */" \
+ > $(UBOOT_CUSTOM).test
+ifneq ($(TARGET_HOSTNAME),)
+ echo "#if defined(CONFIG_HOSTNAME)" >> $(UBOOT_CUSTOM).test
+ echo "#undef CONFIG_HOSTNAME" >> $(UBOOT_CUSTOM).test
+ echo "#define CONFIG_HOSTNAME $(TARGET_HOSTNAME)">> $(UBOOT_CUSTOM).test
+ echo "#endif" >> $(UBOOT_CUSTOM).test
endif
-ifneq ($(strip $(BR2_TARGET_U_BOOT_SERVERIP)),"")
- @echo "#define CONFIG_SERVERIP" >> $(U_BOOT_INC_CONF_FILE)
- $(SED) 's,^#define.*CONFIG_SERVERIP.*,#define CONFIG_SERVERIP $(subst ",,$(BR2_TARGET_U_BOOT_SERVERIP)),' $(U_BOOT_INC_CONF_FILE)
+ifneq ($(TARGET_UBOOT_IPADDR),)
+ echo "#define CONFIG_IPADDR $(TARGET_UBOOT_IPADDR)">> $(UBOOT_CUSTOM).test
endif
-ifneq ($(strip $(BR2_TARGET_U_BOOT_IPADDR)),"")
- @echo "#define CONFIG_IPADDR" >> $(U_BOOT_INC_CONF_FILE)
- $(SED) 's,^#define.*CONFIG_IPADDR.*,#define CONFIG_IPADDR $(subst ",,$(BR2_TARGET_U_BOOT_IPADDR)),' $(U_BOOT_INC_CONF_FILE)
-ifneq ($(strip $(BR2_TARGET_U_BOOT_GATEWAY)),"")
- @echo "#define CONFIG_GATEWAYIP" >> $(U_BOOT_INC_CONF_FILE)
- $(SED) 's,^#define.*CONFIG_GATEWAYIP.*,#define CONFIG_GATEWAYIP $(subst ",,$(BR2_TARGET_U_BOOT_GATEWAY)),' $(U_BOOT_INC_CONF_FILE)
+ifneq ($(TARGET_UBOOT_SERVERIP),)
+ echo "#define CONFIG_SERVERIP $(TARGET_UBOOT_SERVERIP)">> $(UBOOT_CUSTOM).test
endif
-ifneq ($(strip $(BR2_TARGET_U_BOOT_NETMASK)),"")
- @echo "#define CONFIG_NETMASK" >> $(U_BOOT_INC_CONF_FILE)
- $(SED) 's,^#define.*CONFIG_NETMASK.*,#define CONFIG_NETMASK $(subst ",,$(BR2_TARGET_U_BOOT_NETMASK)),' $(U_BOOT_INC_CONF_FILE)
+ifneq ($(TARGET_UBOOT_GATEWAY),)
+ echo "#define CONFIG_GATEWAYIP $(TARGET_UBOOT_GATEWAY)">> $(UBOOT_CUSTOM).test
endif
-endif # end BR2_TARGET_U_BOOT_IPADDR
-ifneq ($(strip $(BR2_TARGET_U_BOOT_ETH0ADDR)),"")
- @echo "#define CONFIG_ETHADDR" >> $(U_BOOT_INC_CONF_FILE)
- $(SED) 's,^#define.*CONFIG_ETHADDR.*,#define CONFIG_ETHADDR $(subst ",,$(BR2_TARGET_U_BOOT_ETH0ADDR)),' $(U_BOOT_INC_CONF_FILE)
+ifneq ($(TARGET_UBOOT_NETMASK),)
+ echo "#define CONFIG_NETMASK $(TARGET_UBOOT_NETMASK)">> $(UBOOT_CUSTOM).test
endif
-ifneq ($(strip $(BR2_TARGET_U_BOOT_ETH1ADDR)),"")
- @echo "#define CONFIG_ETH1ADDR" >> $(U_BOOT_INC_CONF_FILE)
- $(SED) 's,^#define.*CONFIG_ETH1ADDR.*,#define CONFIG_ETH1ADDR $(subst ",,$(BR2_TARGET_U_BOOT_ETH1ADDR)),' $(U_BOOT_INC_CONF_FILE)
+ifneq ($(TARGET_UBOOT_ETHADDR),)
+ echo "#define CONFIG_ETHADDR $(TARGET_UBOOT_ETHADDR)">> $(UBOOT_CUSTOM).test
endif
-ifneq ($(strip $(BR2_TARGET_U_BOOT_BOOTARGS)),"")
- @echo "#undef CONFIG_BOOTARGS" >> $(U_BOOT_INC_CONF_FILE)
- @echo '#define CONFIG_BOOTARGS $(BR2_TARGET_U_BOOT_BOOTARGS)' >> $(U_BOOT_INC_CONF_FILE)
+ diff -q $(UBOOT_CUSTOM).test $(UBOOT_CUSTOM) || cp -af $(UBOOT_CUSTOM).test $(UBOOT_CUSTOM)
+
+$(UBOOT_SCR): .config
+ifneq ($(TARGET_UBOOT_IPADDR),)
+ echo setenv ipaddr $(TARGET_UBOOT_IPADDR) > $(UBOOT_SCR)
endif
-ifneq ($(strip $(BR2_TARGET_U_BOOT_BOOTCMD)),"")
- @echo "#undef CONFIG_BOOTCOMMAND" >> $(U_BOOT_INC_CONF_FILE)
- @echo '#define CONFIG_BOOTCOMMAND $(BR2_TARGET_U_BOOT_BOOTCMD)' >> $(U_BOOT_INC_CONF_FILE)
+ifneq ($(TARGET_UBOOT_SERVERIP),)
+ echo setenv serverip $(TARGET_UBOOT_SERVERIP) >> $(UBOOT_SCR)
endif
- @echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(U_BOOT_INC_CONF_FILE)
- touch $@
+ifneq ($(TARGET_UBOOT_GATEWAY),)
+ echo setenv gatewayip $(TARGET_UBOOT_GATEWAY) >> $(UBOOT_SCR)
+endif
+ifneq ($(TARGET_UBOOT_NETMASK),)
+ echo setenv netmask $(TARGET_UBOOT_NETMASK) >> $(UBOOT_SCR)
+endif
+ echo setenv linux $(BOARD_NAME)-linux-$(LINUX26_VERSION)-$(DATE).gz >> $(UBOOT_SCR)
+ echo setenv kernel-version $(LINUX26_VERSION) >> $(UBOOT_SCR)
+ echo setenv kernel-date $(DATE) >> $(UBOOT_SCR)
+ echo setenv hostname $(TARGET_HOSTNAME) >> $(UBOOT_SCR)
+ echo setenv fs-date $(DATE) >> $(UBOOT_SCR)
+ echo setenv rd-1 rootfs.$(BR2_ARCH)-$(DATE).ext2 >> $(UBOOT_SCR)
+ echo setenv rd-2 rootfs.$(BR2_ARCH)-$(DATE).jffs2 >> $(UBOOT_SCR)
+ echo setenv rd rootfs.$(BR2_ARCH)-$(DATE).ext2 >> $(UBOOT_SCR)
+ echo setenv ver 1 >> $(UBOOT_SCR)
+ifneq ($(TARGET_UBOOT_ETHADDR),)
+ echo setenv ethaddr $(TARGET_UBOOT_ETHADDR) >> $(UBOOT_SCR)
+endif
+ echo setenv fstype ram >> $(UBOOT_SCR)
+ echo fs >> $(UBOOT_SCR)
+ echo os >> $(UBOOT_SCR)
+ echo setargs >> $(UBOOT_SCR)
+ echo saveenv >> $(UBOOT_SCR)
+
+$(UBOOT_SCR).$(PROJECT): $(UBOOT_SCR) $(MKIMAGE)
+ $(MKIMAGE) -A arm \
+ -O linux \
+ -T script \
+ -C none \
+ -a 0 \
+ -e 0 \
+ -n "autoscr config" \
+ -d $(UBOOT_SCR) \
+ $(UBOOT_SCR).$(PROJECT)
+ cp $(UBOOT_SCR).$(PROJECT) /tftpboot
+
+$(MKIMAGE): $(MKIMAGE_BINLOC)
+ cp -f $(MKIMAGE_BINLOC) $(MKIMAGE)
+
+uboot: $(MKIMAGE) uboot-bin $(UBOOT_SCR).$(PROJECT)
-$(U_BOOT_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/.header_modified
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- LDFLAGS="$(TARGET_LDFLAGS)" \
- $(MAKE) -C $(U_BOOT_DIR)
+uboot-source: $(DL_DIR)/$(UBOOT_SOURCE)
+
+uboot-clean:
+ rm -fr $(UBOOT_BUILD_DIR)
+ rm -fr $(UBOOT_PATCHES)
+ rm -f $(BINARIES_DIR)/$(UBOOT_BIN)
+ rm -fr $(UBOOT_DIR)
+ rm -f $(UBOOT_SCR)
+ rm -f $(UBOOT_SCR).$(PROJECT)
+# -$(MAKE) -C $(UBOOT_DIR)/uboot-tools clean
+
+uboot-dirclean: uboot-clean
+ rm -rf $(UBOOT_DIR)
+
+uboot-new:
+ rm -fr $(UBOOT_BUILD_DIR)/u-boot
+ rm -fr $(UBOOT_BUILD_DIR)/u-boot.gz
+ rm -fr $(UBOOT_BUILD_DIR)/u-boot.bin
+ rm -fr /tftpboot/$(UBOOT_BIN)
+ rm -fr $(BINARIES_DIR)/$(UBOOT_BIN)
+
+.PHONY: uboot-bin
+#############################################################
+#
+# Build the uboot root filesystem image
+#
+#############################################################
-$(BINARIES_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/$(U_BOOT_BIN)
- cp -dpf $(U_BOOT_DIR)/$(U_BOOT_BIN) $(BINARIES_DIR)
- cp -dpf $(U_BOOT_DIR)/tools/$(U_BOOT_TOOLS_BIN) $(STAGING_DIR)/usr/bin/
+UBOOT_TARGET:=$(IMAGE).uboot
-u-boot: gcc $(BINARIES_DIR)/$(U_BOOT_BIN)
+ubootroot: host-fakeroot makedevs uboot
+ -@find $(TARGET_DIR) -type f -perm +111 | xargs $(STRIPCMD) 2>/dev/null || true
+ @rm -rf $(TARGET_DIR)/usr/man
+ @rm -rf $(TARGET_DIR)/usr/info
+ -/sbin/ldconfig -r $(TARGET_DIR) 2>/dev/null
+ # Use fakeroot to pretend all target binaries are owned by root
+ rm -f $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
+ touch $(STAGING_DIR)/.fakeroot.00000
+ cat $(STAGING_DIR)/.fakeroot* > $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
+ echo "chown -R root:root $(TARGET_DIR)" >> $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
+ # Use fakeroot to pretend to create all needed device nodes
+ echo "$(STAGING_DIR)/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
+ >> $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
+ # Use fakeroot so mkuboot believes the previous fakery
+ echo "$(UBOOT_DIR)/uboot-tools/mkuboot " \
+ "$(TARGET_DIR) $(UBOOT_TARGET) " \
+ "-noappend $(UBOOT_ENDIANNESS)" \
+ >> $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
+ chmod a+x $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
+ $(STAGING_DIR)/usr/bin/fakeroot -- $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
+ -@rm -f $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
-u-boot-clean:
- $(MAKE) -C $(U_BOOT_DIR) clean
+ubootroot-source: uboot-source
-u-boot-dirclean:
- rm -rf $(U_BOOT_DIR)
+ubootroot-clean:
+ -$(MAKE) -C $(UBOOT_DIR) clean
-u-boot-source: $(DL_DIR)/$(U_BOOT_SOURCE)
+ubootroot-dirclean:
+ rm -rf $(UBOOT_DIR)
#############################################################
#
# Toplevel Makefile options
#
#############################################################
-ifeq ($(strip $(BR2_TARGET_U_BOOT)),y)
-TARGETS+=u-boot
+ifeq ($(strip $(BR2_TARGET_UBOOT)),y)
+TARGETS+=uboot
endif
-u-boot-status:
- @echo
- @echo U_BOOT_INC_CONF_FILE = $(U_BOOT_INC_CONF_FILE)
- @echo
- @echo BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE = $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)
- @echo BR2_TARGET_U_BOOT_CONFIG_BOARD = $(BR2_TARGET_U_BOOT_CONFIG_BOARD)
- @echo BR2_TARGET_U_BOOT_SERVERIP = $(BR2_TARGET_U_BOOT_SERVERIP)
- @echo BR2_TARGET_U_BOOT_IPADDR = $(BR2_TARGET_U_BOOT_IPADDR)
- @echo BR2_TARGET_U_BOOT_GATEWAY = $(BR2_TARGET_U_BOOT_GATEWAY)
- @echo BR2_TARGET_U_BOOT_NETMASK = $(BR2_TARGET_U_BOOT_NETMASK)
- @echo BR2_TARGET_U_BOOT_ETH0ADDR = $(BR2_TARGET_U_BOOT_ETH0ADDR)
- @echo BR2_TARGET_U_BOOT_ETH1ADDR = $(BR2_TARGET_U_BOOT_ETH1ADDR)
- @echo BR2_TARGET_U_BOOT_BOOTARGS = $(BR2_TARGET_U_BOOT_BOOTARGS)
- @echo BR2_TARGET_U_BOOT_BOOTCMD = $(BR2_TARGET_U_BOOT_BOOTCMD)
- @echo
- @exit 0
+uboot-test:
+ -@echo source=$(DL_DIR)/$(UBOOT_SOURCE)
+ -@ls $(DL_DIR)/$(UBOOT_SOURCE)
+ -@echo patch=$(DL_DIR)/$(UBOOT_PATCH_SOURCE)
+ -@ls $(DL_DIR)/$(UBOOT_PATCH_SOURCE)
+ -@echo unpacked=$(UBOOT_PATCHES)/.unpacked
+ -@ls $(UBOOT_PATCHES)/.unpacked
+ -@echo patch-unpacked=$(UBOOT_PATCHES)/.unpacked
+ -@ls $(UBOOT_PATCHES)/.unpacked
+ -@echo patched-source=$(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE)
+ -@ls $(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE)
+ -@echo configured=$(UBOOT_BUILD_DIR)/.configured
+ -@ls $(UBOOT_BUILD_DIR)/.configured
+ -@echo mkimage=$(MKIMAGE_BINLOC)
+ -@ls $(MKIMAGE_BINLOC)
+ -@echo u-boot.bin=$(UBOOT_BUILD_DIR)/u-boot.bin
+ -@ls $(UBOOT_BUILD_DIR)/u-boot.bin
+ -@echo binaries-u-boot.bin=$(BINARIES_DIR)/$(UBOOT_BIN)
+ -@ls $(BINARIES_DIR)/$(UBOOT_BIN)
+ -@echo tftpboot=/tftpboot/$(UBOOT_BIN)
+ -@ls /tftpboot/$(UBOOT_BIN)
+ -@echo "mkimage = $(MKIMAGE)"
+ -@ls $(MKIMAGE)
+ -@echo "u-boot script=$(UBOOT_SCR).$(PROJECT)"
+ -@ls $(UBOOT_SCR).$(PROJECT)
+ -@echo "u-boot script (ASCII)=$(UBOOT_SCR)"
+ -@ls $(UBOOT_SCR)
+ -@echo "mkimage binary=$(MKIMAGE_BINLOC)"
+ -@ls $(MKIMAGE_BINLOC)