summaryrefslogtreecommitdiff
path: root/target/device/jp/q5/kernel-patches-2.4.26/001-q5
diff options
context:
space:
mode:
Diffstat (limited to 'target/device/jp/q5/kernel-patches-2.4.26/001-q5')
-rw-r--r--target/device/jp/q5/kernel-patches-2.4.26/001-q5730
1 files changed, 0 insertions, 730 deletions
diff --git a/target/device/jp/q5/kernel-patches-2.4.26/001-q5 b/target/device/jp/q5/kernel-patches-2.4.26/001-q5
deleted file mode 100644
index 70ca0c555..000000000
--- a/target/device/jp/q5/kernel-patches-2.4.26/001-q5
+++ /dev/null
@@ -1,730 +0,0 @@
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile
---- linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile 2004-02-13 01:03:35.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile 2004-02-13 10:04:07.000000000 +0100
-@@ -16,7 +16,7 @@ all: au1000.o
-
- O_TARGET := au1000.o
-
--export-objs = prom.o clocks.o power.o usbdev.o
-+export-objs = prom.o clocks.o power.o usbdev.o setup.o
-
- obj-y := prom.o int-handler.o dma.o irq.o puts.o time.o reset.o \
- clocks.o power.o setup.o sleeper.o
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/pci_fixup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/pci_fixup.c
---- linux-2.4.25-rc2_org/arch/mips/au1000/common/pci_fixup.c 2004-02-13 01:03:35.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/pci_fixup.c 2004-02-13 10:09:43.000000000 +0100
-@@ -105,42 +105,8 @@ void __init pcibios_fixup(void)
-
- void __init pcibios_fixup_irqs(void)
- {
--#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
-- unsigned int slot, func;
-- unsigned char pin;
-- struct pci_dev *dev;
--
-- pci_for_each_dev(dev) {
-- if (dev->bus->number != 0)
-- return;
--
-- dev->irq = 0xff;
-- slot = PCI_SLOT(dev->devfn);
--#if defined( CONFIG_SOC_AU1500 )
-- switch (slot) {
-- case 12:
-- case 13:
-- default:
-- dev->irq = AU1000_PCI_INTA;
-- break;
-- }
--#elif defined( CONFIG_SOC_AU1550 )
-- switch (slot) {
-- default:
-- case 12:
-- dev->irq = AU1000_PCI_INTA;
-- break;
-- case 13:
-- dev->irq = AU1000_PCI_INTB;
-- break;
-- }
--#endif
--
-- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-- DBG("slot %d irq %d\n", slot, dev->irq);
-- }
--#endif
- }
-+
- unsigned int pcibios_assign_all_busses(void)
- {
- return 0;
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c
---- linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c 2004-02-13 01:03:32.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c 2004-02-13 10:07:12.000000000 +0100
-@@ -81,7 +81,7 @@ void prom_init_cmdline(void)
- }
-
-
--char *prom_getenv(char *envname)
-+char *prom_getenv_n(char *envname, int n)
- {
- /*
- * Return a pointer to the given environment variable.
-@@ -89,19 +89,24 @@ char *prom_getenv(char *envname)
- */
-
- t_env_var *env = (t_env_var *)prom_envp;
-- int i;
-+ int i, j=0;
-
- i = strlen(envname);
-
- while(env->name) {
- if(strncmp(envname, env->name, i) == 0) {
-- return(env->name + strlen(envname) + 1);
-+ if(j++ == n) return(env->name + strlen(envname) + 1);
- }
- env++;
- }
- return(NULL);
- }
-
-+char *prom_getenv(char *envname)
-+{
-+ return prom_getenv_n(envname, 0);
-+}
-+
- inline unsigned char str2hexnum(unsigned char c)
- {
- if(c >= '0' && c <= '9')
-@@ -128,18 +133,18 @@ inline void str2eaddr(unsigned char *ea,
- }
- }
-
--int get_ethernet_addr(char *ethernet_addr)
-+int get_ethernet_addr_n(char *ethernet_addr, int n)
- {
- char *ethaddr_str;
-
-- ethaddr_str = prom_getenv("ethaddr");
-+ ethaddr_str = prom_getenv_n("ethaddr", n);
- if (!ethaddr_str) {
- printk("ethaddr not set in boot prom\n");
- return -1;
- }
- str2eaddr(ethernet_addr, ethaddr_str);
-
--#if 0
-+#if 1
- {
- int i;
-
-@@ -153,7 +158,13 @@ int get_ethernet_addr(char *ethernet_add
- return 0;
- }
-
-+int get_ethernet_addr(char *ethernet_addr)
-+{
-+ return get_ethernet_addr_n(ethernet_addr, 0);
-+}
-+
- void prom_free_prom_memory (void) {}
-+EXPORT_SYMBOL(get_ethernet_addr_n);
- EXPORT_SYMBOL(prom_getcmdline);
- EXPORT_SYMBOL(get_ethernet_addr);
- EXPORT_SYMBOL(str2eaddr);
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c
---- linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c 2004-02-13 01:03:31.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c 2004-02-13 10:04:07.000000000 +0100
-@@ -57,6 +57,7 @@ extern struct ide_ops *ide_ops;
- #endif
-
- extern struct rtc_ops no_rtc_ops;
-+void (*__wbflush) (void);
- extern char * __init prom_getcmdline(void);
- extern void __init board_setup(void);
- extern void au1000_restart(char *);
-@@ -71,6 +72,11 @@ static phys_t au1500_fixup_bigphys_addr(
- extern void au1xxx_time_init(void);
- extern void au1xxx_timer_setup(void);
-
-+void au1500_wbflush(void)
-+{
-+ __asm__ volatile ("sync");
-+}
-+
- void __init au1x00_setup(void)
- {
- char *argptr;
-@@ -89,6 +95,8 @@ void __init au1x00_setup(void)
- }
- #endif
-
-+ __wbflush = au1500_wbflush;
-+
- #ifdef CONFIG_FB_AU1100
- if ((argptr = strstr(argptr, "video=")) == NULL) {
- argptr = prom_getcmdline();
-@@ -215,3 +223,6 @@ static phys_t au1500_fixup_bigphys_addr(
- return phys_addr;
- }
- #endif
-+
-+EXPORT_SYMBOL(__wbflush);
-+
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/pb1500/irqmap.c linux-2.4.25-rc2_q/arch/mips/au1000/pb1500/irqmap.c
---- linux-2.4.25-rc2_org/arch/mips/au1000/pb1500/irqmap.c 2004-02-13 01:03:28.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/pb1500/irqmap.c 2004-02-13 10:10:21.000000000 +0100
-@@ -76,6 +76,7 @@ au1xxx_irq_map_t au1xxx_irq_map[] = {
- { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
-+ { AU1500_GPIO_206, INTC_INT_FALL_EDGE, 0 },
- { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
-
- { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/kernel/head.S linux-2.4.25-rc2_q/arch/mips/kernel/head.S
---- linux-2.4.25-rc2_org/arch/mips/kernel/head.S 2004-02-13 01:02:42.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/kernel/head.S 2004-02-13 10:07:43.000000000 +0100
-@@ -33,7 +33,9 @@
- * Reserved space for exception handlers.
- * Necessary for machines which link their kernels at KSEG0.
- */
-- .fill 0x400
-+ j kernel_entry
-+ nop
-+ .org 0x400
-
- /* The following two symbols are used for kernel profiling. */
- EXPORT(stext)
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/Makefile linux-2.4.25-rc2_q/arch/mips/Makefile
---- linux-2.4.25-rc2_org/arch/mips/Makefile 2004-02-13 01:01:00.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/Makefile 2004-04-09 10:40:09.000000000 +0200
-@@ -69,13 +69,13 @@ endif
- set_gccflags = $(shell \
- while :; do \
- cpu=$(1); isa=-$(2); \
-- for gcc_opt in -march= -mcpu=; do \
-+ for gcc_opt in -march=; do \
- $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
- -xc /dev/null > /dev/null 2>&1 && \
- break 2; \
- done; \
- cpu=$(3); isa=-$(4); \
-- for gcc_opt in -march= -mcpu=; do \
-+ for gcc_opt in -march=; do \
- $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
- -xc /dev/null > /dev/null 2>&1 && \
- break 2; \
-@@ -90,7 +90,7 @@ else \
- fi; \
- gas_abi=-Wa,-32; gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \
- while :; do \
-- for gas_opt in -Wa,-march= -Wa,-mcpu=; do \
-+ for gas_opt in -Wa,-march=; do \
- $(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \
- -o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \
- break 2; \
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c
---- linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c 2004-02-12 23:51:10.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c 2004-02-13 10:11:06.000000000 +0100
-@@ -29,6 +29,7 @@
- #include <linux/errno.h>
- #include <linux/init.h>
- #include <linux/input.h>
-+#include <linux/pm.h>
-
- void kbd_leds(unsigned char leds)
- {
-@@ -140,3 +141,46 @@ void __init kbd_init_hw(void)
- {
- printk("Dummy keyboard driver installed.\n");
- }
-+
-+
-+void panic_blink(void)
-+ {
-+ }
-+
-+
-+ int pckbd_translate(unsigned char scancode, unsigned char *keycode,
-+ char raw_mode)
-+ {
-+ return 0;
-+ }
-+
-+ char pckbd_unexpected_up(unsigned char keycode)
-+ {
-+ return 0;
-+ }
-+
-+
-+ void pckbd_leds(unsigned char leds)
-+ {
-+ }
-+
-+
-+ int pckbd_setkeycode(unsigned int scancode, unsigned int keycode)
-+ {
-+ return 0;
-+ }
-+
-+ int pckbd_getkeycode(unsigned int scancode)
-+ {
-+ return 0;
-+ }
-+
-+ void __init pckbd_init_hw(void)
-+ {
-+ }
-+
-+ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data)
-+ {
-+ return 0;
-+ }
-+
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/Makefile linux-2.4.25-rc2_q/drivers/char/Makefile
---- linux-2.4.25-rc2_org/drivers/char/Makefile 2004-02-12 23:50:40.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/char/Makefile 2004-02-13 10:11:06.000000000 +0100
-@@ -32,7 +32,7 @@ mod-subdirs := joystick ftape drm drm-4.
- list-multi :=
-
- KEYMAP =defkeymap.o
--KEYBD =pc_keyb.o
-+KEYBD =dummy_keyb.o
- CONSOLE =console.o
- SERIAL =serial.o
-
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c
---- linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c 2004-02-13 00:49:45.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c 2004-03-16 10:04:18.000000000 +0100
-@@ -511,7 +511,7 @@ static int do_write_oneword(struct map_i
- or tells us why it failed. */
- dq6 = CMD(1<<6);
- dq5 = CMD(1<<5);
-- timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */
-+ timeo = jiffies + HZ; /* setting timeout to 1ms for now */
-
- oldstatus = cfi_read(map, adr);
- status = cfi_read(map, adr);
-@@ -540,9 +540,7 @@ static int do_write_oneword(struct map_i
- oldstatus = cfi_read(map, adr);
- status = cfi_read(map, adr);
-
-- if ( (oldstatus & 0x00FF) == (status & 0x00FF) ) {
-- printk(KERN_WARNING "Warning: DQ5 raised while program operation was in progress, however operation completed OK\n" );
-- } else {
-+ if ( (oldstatus & 0x00FF) != (status & 0x00FF) ) {
- /* DQ5 is active so we can do a reset and stop the erase */
- cfi_write(map, CMD(0xF0), chip->start);
- printk(KERN_WARNING "Internal flash device timeout occurred or write operation was performed while flash was programming.\n" );
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c
---- linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c 2004-02-13 00:50:09.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c 2004-02-13 10:11:40.000000000 +0100
-@@ -86,28 +86,24 @@ static int mtd_parts_n
- #else
- static struct mtd_partition physmap_partitions[] = {
- /* Put your own partition definitions here */
--#if 0
- {
-- name: "bootROM",
-- size: 0x80000,
-+ name: "fs1",
-+ size: 28*1024*1024,
- offset: 0,
-- mask_flags: MTD_WRITEABLE, /* force read-only */
- }, {
-- name: "zImage",
-- size: 0x100000,
-+ name: "bootldr",
-+ size: 128*1024,
- offset: MTDPART_OFS_APPEND,
- mask_flags: MTD_WRITEABLE, /* force read-only */
- }, {
-- name: "ramdisk.gz",
-- size: 0x300000,
-+ name: "kernel",
-+ size: 1*1024*1024,
- offset: MTDPART_OFS_APPEND,
-- mask_flags: MTD_WRITEABLE, /* force read-only */
- }, {
-- name: "User FS",
-+ name: "fs2",
- size: MTDPART_SIZ_FULL,
- offset: MTDPART_OFS_APPEND,
- }
--#endif
- };
-
- #define NUM_PARTITIONS (sizeof(physmap_partitions)/sizeof(struct mtd_partition))
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/au1000_eth.c linux-2.4.25-rc2_q/drivers/net/au1000_eth.c
---- linux-2.4.25-rc2_org/drivers/net/au1000_eth.c 2004-02-12 23:33:59.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/net/au1000_eth.c 2004-02-13 10:06:01.000000000 +0100
-@@ -97,6 +97,7 @@ extern int get_ethernet_addr(char *ether
- extern inline void str2eaddr(unsigned char *ea, unsigned char *str);
- extern inline unsigned char str2hexnum(unsigned char c);
- extern char * __init prom_getcmdline(void);
-+extern int get_ethernet_addr_n(char *ethernet_addr, int n);
-
- /*
- * Theory of operation
-@@ -591,6 +592,99 @@ int ks8995m_status(struct net_device *de
- return 0;
- }
-
-+int ns_83847_reset(struct net_device *dev, int phy_addr)
-+ {
-+ s16 mii_control, timeout;
-+
-+ // printk("ns_reset\n");
-+ mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
-+ mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET);
-+ mdelay(1);
-+ for (timeout = 100; timeout > 0; --timeout) {
-+ mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
-+ if ((mii_control & MII_CNTL_RESET) == 0)
-+ break;
-+ mdelay(1);
-+ }
-+ if (mii_control & MII_CNTL_RESET) {
-+ printk(KERN_ERR "%s PHY reset timeout !\n", dev->name);
-+ return -1;
-+ }
-+ return 0;
-+ }
-+
-+int ns_83847_init(struct net_device *dev, int phy_addr)
-+ {
-+ s16 data;
-+ // printk("ns_init\n");
-+
-+ /* Stop auto-negotiation */
-+ // data = mdio_read(dev, phy_addr, MII_CONTROL);
-+ // mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO);
-+ // mdio_write(dev, phy_addr, 0, 0x0000);
-+ mdio_write(dev, phy_addr, MII_CONTROL, MII_CNTL_F100 /* | MII_CNTL_FDX */);
-+
-+ /* Set advertisement to 10/100 and Half/Full duplex (full capabilities) */
-+ data = mdio_read(dev, phy_addr, MII_ANADV);
-+ /* obs PAUSE bit */
-+ data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; /* MII_NWAY_T4 not sopported */ ;
-+ mdio_write(dev, phy_addr, MII_ANADV, data);
-+
-+ /* Bypass led stretching? */
-+ data = mdio_read(dev, phy_addr, MII_NS_PHYCTRL);
-+ data |= MII_NS_PHYCTRL_BP_STRETCH;
-+ mdio_write(dev, phy_addr, MII_NS_PHYCTRL, data);
-+
-+ /* Restart auto-negotiation */
-+ data = mdio_read(dev, phy_addr, MII_CONTROL);
-+ data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO;
-+ mdio_write(dev, phy_addr, MII_CONTROL, data);
-+
-+ return 0;
-+ }
-+
-+int ns_83847_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed)
-+ {
-+ u16 mii_data;
-+ struct au1000_private *aup;
-+
-+ if (!dev) {
-+ printk(KERN_ERR "ns_83847_status error: NULL dev\n");
-+ return -1;
-+ }
-+ aup = (struct au1000_private *) dev->priv;
-+
-+ mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS);
-+ // printk("ns_status: %04x\n", mii_data);
-+ if (mii_data & MII_STAT_LINK) {
-+ *link = 1;
-+ mii_data = mdio_read(dev, aup->phy_addr, MII_NS_PHYSTS);
-+ if (mii_data & MII_NS_PHYSTS_SPEED_10) {
-+ *speed = IF_PORT_10BASET;
-+ dev->if_port = IF_PORT_10BASET;
-+ }
-+ else {
-+ if (mii_data & MII_NS_PHYSTS_DUPLEX_FULL) {
-+ *speed = IF_PORT_100BASEFX;
-+ dev->if_port = IF_PORT_100BASEFX;
-+ }
-+ else {
-+ *speed = IF_PORT_100BASETX;
-+ dev->if_port = IF_PORT_100BASETX;
-+ }
-+ }
-+
-+ }
-+ else {
-+ *link = 0;
-+ *speed = 0;
-+ dev->if_port = IF_PORT_UNKNOWN;
-+ }
-+ return 0;
-+ }
-+
-+
-+
- #ifdef CONFIG_MIPS_BOSPORUS
- int stub_init(struct net_device *dev, int phy_addr)
- {
-@@ -616,6 +710,12 @@ stub_status(struct net_device *dev, int
- }
- #endif
-
-+struct phy_ops ns_83847_ops = {
-+ ns_83847_init,
-+ ns_83847_reset,
-+ ns_83847_status,
-+};
-+
- struct phy_ops bcm_5201_ops = {
- bcm_5201_init,
- bcm_5201_reset,
-@@ -667,6 +767,7 @@ static struct mii_chip_info {
- struct phy_ops *phy_ops;
- int dual_phy;
- } mii_chip_table[] = {
-+ {"Natsemi DP83847 PHY", 0x2000, 0x5c30, &ns_83847_ops },
- {"Broadcom BCM5201 10/100 BaseT PHY",0x0040,0x6212, &bcm_5201_ops,0},
- {"Broadcom BCM5221 10/100 BaseT PHY",0x0040,0x61e4, &bcm_5201_ops,0},
- {"Broadcom BCM5222 10/100 BaseT PHY",0x0040,0x6322, &bcm_5201_ops,1},
-@@ -868,6 +969,8 @@ static int mii_probe (struct net_device
- }
- }
- }
-+ printk(KERN_ERR "%s: Au1x No MII transceivers found!\n", dev->name);
-+ return -1;
- found:
-
- #ifdef CONFIG_MIPS_BOSPORUS
-@@ -1176,21 +1279,10 @@ au1000_probe(u32 ioaddr, int irq, int po
- switch (ioaddr) {
- case AU1000_ETH0_BASE:
- case AU1500_ETH0_BASE:
-- /* check env variables first */
- if (!get_ethernet_addr(ethaddr)) {
- memcpy(au1000_mac_addr, ethaddr, sizeof(dev->dev_addr));
- } else {
-- /* Check command line */
-- argptr = prom_getcmdline();
-- if ((pmac = strstr(argptr, "ethaddr=")) == NULL) {
-- printk(KERN_INFO "%s: No mac address found\n",
-- dev->name);
-- /* use the hard coded mac addresses */
-- } else {
-- str2eaddr(ethaddr, pmac + strlen("ethaddr="));
-- memcpy(au1000_mac_addr, ethaddr,
-- sizeof(dev->dev_addr));
-- }
-+ printk(KERN_INFO "%s: No mac address found\n", dev->name);
- }
- if (ioaddr == AU1000_ETH0_BASE)
- aup->enable = (volatile u32 *)
-@@ -1206,6 +1298,11 @@ au1000_probe(u32 ioaddr, int irq, int po
-
- case AU1000_ETH1_BASE:
- case AU1500_ETH1_BASE:
-+ if (!get_ethernet_addr_n(ethaddr, 1)) {
-+ memcpy(au1000_mac_addr, ethaddr, sizeof(dev->dev_addr));
-+ } else {
-+ printk(KERN_INFO "%s: No mac address found\n", dev->name);
-+ }
- if (ioaddr == AU1000_ETH1_BASE)
- aup->enable = (volatile u32 *)
- ((unsigned long)AU1000_MAC1_ENABLE);
-@@ -1213,7 +1310,6 @@ au1000_probe(u32 ioaddr, int irq, int po
- aup->enable = (volatile u32 *)
- ((unsigned long)AU1500_MAC1_ENABLE);
- memcpy(dev->dev_addr, au1000_mac_addr, sizeof(dev->dev_addr));
-- dev->dev_addr[4] += 0x10;
- setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR);
- aup->mac_id = 1;
- au_macs[1] = aup;
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/au1000_eth.h linux-2.4.25-rc2_q/drivers/net/au1000_eth.h
---- linux-2.4.25-rc2_org/drivers/net/au1000_eth.h 2004-02-12 23:33:54.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/net/au1000_eth.h 2004-02-13 10:06:01.000000000 +0100
-@@ -86,6 +86,28 @@
- #define MII_STAT_CAN_TX_FDX 0x4000
- #define MII_STAT_CAN_T4 0x8000
-
-+/* mii registers for NS 83847 */
-+#define MII_NS_PHYSTS 0x10
-+#define MII_NS_FCSCR 0x14
-+#define MII_NS_RECR 0x15
-+#define MII_NS_PCSR 0x16
-+#define MII_NS_PHYCTRL 0x19
-+#define MII_NS_10BTSCR 0x1a
-+#define MII_NS_CDCTRL 0x1b
-+
-+/* MII_NS_PHYSTS bits */
-+#define MII_NS_PHYSTS_LINK (1)
-+#define MII_NS_PHYSTS_SPEED_10 (1<<1)
-+#define MII_NS_PHYSTS_DUPLEX_FULL (1<<2)
-+
-+/* MII_NS_PHYCTRL bits */
-+#define MII_NS_PHYCTRL_BP_STRETCH (1<<8)
-+
-+/* MII_NS_CDCTRL bits */
-+#define MII_NS_CDCTRL_CD_ENABLE (1<<15)
-+#define MII_NS_CDCTRL_RISETIME (1<<11)
-+#define MII_NS_CDCTRL_FALLTIME (1<<9)
-+
-
- #define MII_ID1_OUI_LO 0xFC00 /* low bits of OUI mask */
- #define MII_ID1_MODEL 0x03F0 /* model number */
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/natsemi.c linux-2.4.25-rc2_q/drivers/net/natsemi.c
---- linux-2.4.25-rc2_org/drivers/net/natsemi.c 2004-02-12 23:29:19.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/net/natsemi.c 2004-04-22 09:28:51.000000000 +0200
-@@ -773,7 +773,11 @@ static int __devinit natsemi_probe1 (str
- goto err_ioremap;
- }
-
-- /* Work around the dropped serial bit. */
-+#ifdef __mips__
-+ if (get_ethernet_addr_n(dev->dev_addr, 2)) {
-+ printk(KERN_INFO "%s: No mac address found\n", dev->name);
-+ }
-+#else
- prev_eedata = eeprom_read(ioaddr, 6);
- for (i = 0; i < 3; i++) {
- int eedata = eeprom_read(ioaddr, i + 7);
-@@ -781,6 +785,7 @@ static int __devinit natsemi_probe1 (str
- dev->dev_addr[i*2+1] = eedata >> 7;
- prev_eedata = eedata;
- }
-+#endif
-
- dev->base_addr = ioaddr;
- dev->irq = irq;
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h
---- linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h 2004-02-12 23:47:43.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h 2004-02-13 10:13:40.000000000 +0100
-@@ -302,9 +302,9 @@ typedef struct hermes_response {
- #define hermes_read_reg(hw, off) ((hw)->io_space ? \
- inw((hw)->iobase + ( (off) << (hw)->reg_spacing )) : \
- readw((hw)->iobase + ( (off) << (hw)->reg_spacing )))
--#define hermes_write_reg(hw, off, val) ((hw)->io_space ? \
-- outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )) : \
-- writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )))
-+#define hermes_write_reg(hw, off, val) { if((hw)->io_space) \
-+ outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )); else \
-+ writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing ));}
-
- #define hermes_read_regn(hw, name) (hermes_read_reg((hw), HERMES_##name))
- #define hermes_write_regn(hw, name, val) (hermes_write_reg((hw), HERMES_##name, (val)))
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/au1000.h linux-2.4.25-rc2_q/include/asm-mips/au1000.h
---- linux-2.4.25-rc2_org/include/asm-mips/au1000.h 2004-02-12 23:06:31.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/asm-mips/au1000.h 2004-02-13 10:41:49.000000000 +0100
-@@ -283,14 +283,14 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
- #define INTC_INT_HIGH_AND_LOW_LEVEL 0x7
-
- /* Interrupt Numbers */
--#define AU1000_UART0_INT 0
-+#define AU1000_UART0_INT 3
- #define AU1000_UART1_INT 1 /* au1000 */
- #define AU1000_UART2_INT 2 /* au1000 */
-
- #define AU1000_PCI_INTA 1 /* au1500 */
- #define AU1000_PCI_INTB 2 /* au1500 */
-
--#define AU1000_UART3_INT 3
-+#define AU1000_UART3_INT 0
-
- #define AU1000_SSI0_INT 4 /* au1000 */
- #define AU1000_SSI1_INT 5 /* au1000 */
-@@ -693,12 +693,12 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
-
-
- /* UARTS 0-3 */
--#define UART0_ADDR 0xB1100000
-+#define UART0_ADDR 0xB1400000
- #define UART1_ADDR 0xB1200000
- #define UART2_ADDR 0xB1300000
--#define UART3_ADDR 0xB1400000
-+#define UART3_ADDR 0xB1100000
- #define UART_BASE UART0_ADDR
--#define UART_DEBUG_BASE UART3_ADDR
-+#define UART_DEBUG_BASE UART0_ADDR
-
- #define UART_RX 0 /* Receive buffer */
- #define UART_TX 4 /* Transmit buffer */
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/page.h linux-2.4.25-rc2_q/include/asm-mips/page.h
---- linux-2.4.25-rc2_org/include/asm-mips/page.h 2004-02-12 23:06:14.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/asm-mips/page.h 2004-03-23 14:18:38.000000000 +0100
-@@ -13,7 +13,6 @@
- #include <linux/config.h>
- #include <asm/break.h>
-
--#ifdef __KERNEL__
-
- /*
- * PAGE_SHIFT determines the page size
-@@ -30,6 +29,7 @@
- #define PAGE_SIZE (1L << PAGE_SHIFT)
- #define PAGE_MASK (~(PAGE_SIZE-1))
-
-+#ifdef __KERNEL__
- #ifndef __ASSEMBLY__
-
- #include <asm/cacheflush.h>
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/wbflush.h linux-2.4.25-rc2_q/include/asm-mips/wbflush.h
---- linux-2.4.25-rc2_org/include/asm-mips/wbflush.h 2004-02-12 23:06:33.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/asm-mips/wbflush.h 2004-02-13 20:42:57.000000000 +0100
-@@ -15,8 +15,11 @@
-
- #ifdef CONFIG_CPU_HAS_WB
-
--extern void (*__wbflush)(void);
--extern void wbflush_setup(void);
-+//extern void (*__wbflush)(void);
-+//extern void wbflush_setup(void);
-+
-+
-+#define __wbflush() { __asm__ volatile ("sync"); }
-
- #define wbflush() \
- do { \
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/cs_types.h linux-2.4.25-rc2_q/include/pcmcia/cs_types.h
---- linux-2.4.25-rc2_org/include/pcmcia/cs_types.h 2004-02-12 23:13:05.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/pcmcia/cs_types.h 2004-02-13 10:15:10.000000000 +0100
-@@ -37,6 +37,7 @@
- #endif
-
- #if defined(__arm__) || defined(__mips__)
-+//obs jp: on mips, "typedef unsigned long long ioaddr_t;" may be needed to support cardbus
- typedef u_int ioaddr_t;
- #else
- typedef u_short ioaddr_t;
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/ss.h linux-2.4.25-rc2_q/include/pcmcia/ss.h
---- linux-2.4.25-rc2_org/include/pcmcia/ss.h 2004-02-12 23:13:02.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/pcmcia/ss.h 2004-02-13 10:15:32.000000000 +0100
-@@ -112,7 +112,7 @@ typedef struct pccard_mem_map {
- u_char map;
- u_char flags;
- u_short speed;
-- u_long sys_start, sys_stop;
-+ ioaddr_t sys_start, sys_stop;
- u_int card_start;
- } pccard_mem_map;
-
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/init/do_mounts.c linux-2.4.25-rc2_q/init/do_mounts.c
---- linux-2.4.25-rc2_org/init/do_mounts.c 2004-02-12 22:59:08.000000000 +0100
-+++ linux-2.4.25-rc2_q/init/do_mounts.c 2004-02-13 10:16:02.000000000 +0100
-@@ -760,8 +760,6 @@ static void __init devfs_make_root(char
- static void __init mount_root(void)
- {
- #ifdef CONFIG_ROOT_NFS
-- if (MAJOR(ROOT_DEV) == NFS_MAJOR
-- && MINOR(ROOT_DEV) == NFS_MINOR) {
- if (mount_nfs_root()) {
- sys_chdir("/root");
- ROOT_DEV = current->fs->pwdmnt->mnt_sb->s_dev;
-@@ -770,7 +768,6 @@ static void __init mount_root(void)
- }
- printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n");
- ROOT_DEV = MKDEV(FLOPPY_MAJOR, 0);
-- }
- #endif
- devfs_make_root(root_device_name);
- create_dev("/dev/root", ROOT_DEV, root_device_name);
-