summaryrefslogtreecommitdiff
path: root/target/linux-experimental
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux-experimental')
-rw-r--r--target/linux-experimental/Makefile.in318
1 files changed, 0 insertions, 318 deletions
diff --git a/target/linux-experimental/Makefile.in b/target/linux-experimental/Makefile.in
deleted file mode 100644
index ab9a6135d..000000000
--- a/target/linux-experimental/Makefile.in
+++ /dev/null
@@ -1,318 +0,0 @@
-#############################################################
-#
-# Linux kernel 2.6 target
-#
-#############################################################
-ifneq ($(filter $(TARGETS),linux26),)
-
-
-ifeq ($(LINUX_HEADERS_VERSION),)
-# Version of Linux to download and then apply patches to
-# XXX: andersee, i do not understand why we need this (BF)
-DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION)))
-# "))
-LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION)))
-# "))
-LINUX26_RC_PATCH:=$(strip $(subst ",, $(BR2_LINUX26_RC_PATCH)))
-# "))
-LINUX_BSP_PATCH:=$(strip $(subst ",, $(BR2_LINUX_BSP_ATMEL_PATCH)))
-# " ))
-MKIMAGE:=$(BUILD_DIR)/mkimage
-
-ifeq ($(DOWNLOAD_LINUX26_VERSION),)
-DOWNLOAD_LINUX26_VERSION=2.6.19.2
-endif
-# Version of Linux after applying any patches
-LINUX26_VERSION=$(DOWNLOAD_LINUX26_VERSION)
-
-
-else # ---------------------------------------------------
-
-# Define DOWNLOAD_LINUX26_VERSION unless defined
-ifeq ($(strip $(BR2_DOWNLOAD_LINUX26_VERSION)),)
-DOWNLOAD_LINUX26_VERSION=$(LINUX_HEADERS_VERSION)
-else
-DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION)))
-# "))
-endif
-
-
-# Define LINUX26_VERSION unless defined
-ifeq ($(strip $(BR2_LINUX26_VERSION)),)
-LINUX26_VERSION=$(LINUX_HEADERS_VERSION)
-else
-LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION)))
-# "))
-endif
-
-endif # ---------------------------------------------------
-
-# Handle case when we want to build using an "rc" patch
-# Example: to build 2.6.21-rc1 you need to:
-# * Download linux-2.6.20
-# * Apply patch-2.6.21-rc1
-
-LINUX26_SOURCE:=linux-$(DOWNLOAD_LINUX26_VERSION).tar.bz2
-LINUX26_SITE=http://ftp.kernel.org/pub/linux/kernel/v2.6
-LINUX26_BZCAT:=$(BZCAT)
-
-# Linux kernel binary
-LINUX26_FORMAT:=$(strip $(subst ",, $(BR2_LINUX26_FORMAT)))
-# " ))
-
-# Linux kernel configuration file
-ifeq ($(strip $(LINUX26_KCONFIG)),)
-LINUX26_KCONFIG=$(BR2_BOARD_PATH)/linux26.config
-endif
-
-# File name for the Linux kernel binary
-ifeq ($(strip $(LINUX26_KERNEL)),)
-#LINUX26_KERNEL=linux-kernel-$(LINUX26_VERSION)-$(KERNEL_ARCH)
-LINUX26_KERNEL:=$(BOARD_NAME)-linux-$(LINUX26_VERSION)-$(DATE).gz
-endif
-
-ifeq ($(strip $(LINUX26_BINLOC)),)
-LINUX26_BINLOC=$(LINUX26_FORMAT)
-endif
-
-# Put binary in root file system
-ifeq ($(strip $(BR2_LINUX_IN_ROOTFS)),y)
-ifeq ($(strip $(LINUX26_TARGET)),)
-LINUX26_TARGET:=$(TARGET_DIR)/boot/$(LINUX26_BINLOC)
-endif
-else
-LINUX26_TARGET:=$(BINARIES_DIR)/$(LINUX26_KERNEL)
-endif
-endif
-
-ifeq ($(strip $(LINUX26_BUILD_DIR)),)
-LINUX26_BUILD_DIR=$(PROJECT_BUILD_DIR)
-endif
-
-ifeq ($(strip $(BR2_LINUX26_DEFCONFIG)),y)
-LINUX26_DEFCONFIG=$(BOARD_NAME)_defconfig
-endif
-
-# Version of Linux AFTER patches
-LINUX26_DIR=$(LINUX26_BUILD_DIR)/linux-$(LINUX26_VERSION)
-
-# for packages that need it
-LINUX_VERSION=$(LINUX26_VERSION)
-LINUX_DIR=$(LINUX26_DIR)
-LINUX_KERNEL=$(LINUX26_KERNEL)
-
-# kernel patches
-ifeq ($(strip $(subst ",, $(LINUX26_PATCH_DIR))),)
-# ")))
-LINUX26_PATCH_DIR:=$(BR2_BOARD_PATH)/kernel-patches/
-endif
-PATCH_DIR=$(strip $(subst ",, $(LINUX26_PATCH_DIR)))
-# " ))
-
-LINUX26_MAKE_FLAGS = $(TARGET_CONFIGURE_OPTS) ARCH=$(KERNEL_ARCH) \
- PATH=$(TARGET_PATH) INSTALL_MOD_PATH=$(TARGET_DIR) \
- CROSS_COMPILE=$(KERNEL_CROSS)
-
-$(LINUX26_KCONFIG):
- @if [ ! -f "$(LINUX26_KCONFIG)" ] ; then \
- echo ""; \
- echo "You should create a .config for your kernel"; \
- echo "and install it as $(LINUX26_KCONFIG)"; \
- echo ""; \
- sleep 5; \
- fi
-
-# Check if we have a release candidate.
-# This makes life complex
-# To build linux-2.6.21-rc2 you need to:
-# * Download linux.2.6.20.tar.bz2
-# * Download patch-2.6.21-rc2.bz2
-# I:E you have to download the *previous* major version
-
-ifneq ($(LINUX26_RC_PATCH),)
-# We have a "release candidate"
-LINUX26_RC_PATCH_SOURCE:=$(PROJECT_BUILD_DIR)/linux-patch/$(LINUX26_RC_PATCH)
-
-# Create rule to download the patch
-$(LINUX26_RC_PATCH_SOURCE):
- mkdir -p $(PROJECT_BUILD_DIR)/linux-patch/
- $(WGET) -P $(PROJECT_BUILD_DIR)/linux-patch $(LINUX26_SITE)/$(LINUX26_RC_PATCH)
-# $(LINUX26_BZCAT) $(PROJECT_BUILD_DIR)/linux-patch/$(LINUX26_RC_PATCH).bz2
-else
-# We have a vanilla style linux kernel
-LINUX26_RC_PATCH_SOURCE:=
-endif
-
-ifneq ($(strip $(LINUX_HEADERS_SOURCE)),$(strip $(LINUX26_SOURCE)))
-$(DL_DIR)/$(LINUX26_SOURCE):
- $(WGET) -P $(DL_DIR) $(LINUX26_SITE)/$(LINUX26_SOURCE)
-endif
-
-$(LINUX26_DIR)/.unpacked: $(DL_DIR)/$(LINUX26_SOURCE) $(LINUX26_RC_PATCH_SOURCE)
- rm -rf $(LINUX26_DIR)
- $(LINUX26_BZCAT) $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(LINUX26_BUILD_DIR) $(TAR_OPTIONS) -
-ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION))
- # Rename the dir from the downloaded version to the AFTER patch version
- mv -f $(LINUX26_BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(LINUX26_DIR)
-endif
-ifneq ($(LINUX26_RC_PATCH),)
- -(cd $(LINUX26_DIR); $(LINUX26_BZCAT) $(LINUX26_RC_PATCH_SOURCE) | patch -p1)
-endif
- -(cd $(TOOL_BUILD_DIR); ln -snf $(LINUX26_DIR) linux)
- rm -f $(LINUX26_DIR)/.kernelrelease
- echo $(LINUX26_VERSION) > $(LINUX26_DIR)/.kernelrelease
- touch $@
-
-$(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked
- echo $(PATCH_DIR)
- toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR)
- touch $@
-
-$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
- -ls -l $(LINUX26_DIR)/.patched
- -ls -l $(LINUX26_KCONFIG)
- -ls -l $(LINUX26_DIR)/.configured
- -ls -l $(LINUX26_DIR)/.unpacked
- -ls -l $(DL_DIR)/$(LINUX26_SOURCE)
- -ls -l $(LINUX26_RC_PATCH_SOURCE)
-ifeq ($(strip $(BR2_LINUX26_DEFCONFIG)),y)
- make ARCH=$(ARCH) -C $(LINUX26_DIR) $(BOARD_NAME)_defconfig
-else
- cp -df --preserve=mode,ownership $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
-endif
-ifeq ($(strip $(BR2_LINUX_CUSTOMIZE)),y)
- make -C $(LINUX26_DIR) xconfig
-endif
- $(SED) '/CONFIG_AEABI/d' $(LINUX26_DIR)/.config
-ifeq ($(BR2_ARM_EABI),y)
- echo "CONFIG_AEABI=y" >> $(LINUX26_DIR)/.config
- $(SED) '/CONFIG_OABI_COMPAT/d' $(LINUX26_DIR)/.config
- echo "# CONFIG_OABI_COMPAT is not set" >> $(LINUX26_DIR)/.config
-else
- echo "# CONFIG_AEABI is not set" >> $(LINUX26_DIR)/.config
-endif
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig include/linux/version.h
- touch $@
-
-$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare
- touch $@
-
-$(LINUX26_DIR)/arch/$(ARCH)/boot/$(LINUX26_FORMAT): $(LINUX26_DIR)/vmlinux
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) $(LINUX26_FORMAT)
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules
- touch -c $@
-
-$(LINUX26_DIR)/vmlinux: $(LINUX26_DIR)/.depend_done $(STAGING_DIR)/include/linux/version.h
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) vmlinux
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules
- touch -c $@
-
-
-
-#-----------------------------------------------------------------------------------
-# Rule can be enabled by setting
-# LINUX26_TARGET:= $(TARGET_DIR)/boot/$(LINUX26_BINLOC)
-#
-$(TARGET_DIR)/boot/$(LINUX26_FORMAT): $(LINUX26_DIR)/$(LINUX26_FORMAT)
- [ -d $(TARGET_DIR)/boot/ ] || mkdir $(TARGET_DIR)/boot
- cp -a $(LINUX26_DIR)/$(LINUX26_FORMAT) $(LINUX26_DIR)/System.map $(TARGET_DIR)/boot/$(LINUX26_FORMAT)
- touch -c $@
-
-#-----------------------------------------------------------------------------------
-# Rule can be enabled by setting
-# LINUX26_TARGET:= $(BINARIES_DIR)/$(LINUX26_KERNEL)
-# LINUX26_FORMAT:= vmlinux
-
-$(BINARIES_DIR)/$(LINUX26_KERNEL): $(LINUX26_DIR)/uImage
- cp -dpf $(LINUX26_DIR)/uImage $(BINARIES_DIR)/$(LINUX26_KERNEL)
- cp -dpf $(LINUX26_DIR)/uImage /tftpboot/$(LINUX26_KERNEL)
- mkdir -p $(TARGET_DIR)/boot/
- cp -dpf $(LINUX26_DIR)/.config $(TARGET_DIR)/boot/$(BOARD_NAME)-linux-$(LINUX26_VERSION).config
- cp -dpf .config $(TARGET_DIR)/boot/$(BOARD_NAME)-buildroot.config
- cp -dpf $(BUSYBOX_DIR)/.config $(TARGET_DIR)/boot/busybox.config
-
-$(PROJECT_BUILD_DIR)/linux.bin: $(LINUX26_DIR)/vmlinux
- ${KERNEL_CROSS}objcopy -O binary -S $(LINUX26_DIR)/vmlinux $(PROJECT_BUILD_DIR)/linux.bin
-
-$(LINUX26_DIR)/uImage: $(LINUX26_DIR)/arch/$(ARCH)/boot/uImage
- cp -dpf $(LINUX26_DIR)/arch/$(ARCH)/boot/uImage $(LINUX26_DIR)/uImage
-
-
-$(PROJECT_BUILD_DIR)/xxxx: $(PROJECT_BUILD_DIR)/linux.bin $(MKIMAGE)
- gzip -v9 -c $(PROJECT_BUILD_DIR)/linux.bin > $(PROJECT_BUILD_DIR)/linux.bin.gz
- $(MKIMAGE) -A $(ARCH) \
- -O linux \
- -C gzip \
- -a 0x20008000 \
- -e 0x20008000 \
- -d $(PROJECT_BUILD_DIR)/linux.bin.gz \
- $(LINUX26_DIR)/uImage
- rm -f $(PROJECT_BUILD_DIR)/linux.bin.gz
-#-----------------------------------------------------------------------------------
-
-$(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep: $(LINUX26_TARGET) $(TARGET_DIR)/sbin/modprobe $(LINUX26_DIR)/vmlinux
- rm -rf $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)
- rm -f $(TARGET_DIR)/sbin/cardmgr
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) \
- DEPMOD=$(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26 \
- INSTALL_MOD_PATH=$(TARGET_DIR) modules_install
- (cd $(TARGET_DIR)/lib/modules; \
- rm -f drivers; \
- ln -s $(LINUX26_VERSION)/kernel/drivers .)
- chmod a+x target/depmod.pl
- target/depmod.pl \
- -b $(TARGET_DIR)/lib/modules/$(DOWNLOAD_LINUX26_VERSION) \
- -k $(LINUX26_DIR)/vmlinux \
- -F $(LINUX26_DIR)/System.map \
- > $(TARGET_DIR)/lib/modules/$(shell cat $(LINUX26_DIR)/include/config/kernel.release 2> /dev/null)/modules.dep
- rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/build
- touch -c $@
-
-$(STAGING_DIR)/include/linux/version.h: $(LINUX26_DIR)/.configured
- mkdir -p $(STAGING_DIR)/include
- tar -ch -C $(LINUX26_DIR)/include -f - linux | tar -xf - -C $(STAGING_DIR)/include/
- tar -ch -C $(LINUX26_DIR)/include -f - asm | tar -xf - -C $(STAGING_DIR)/include/
-
-linux26-menuconfig: $(LINUX26_DIR)/.patched host-sed
- [ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig
- -[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured
-
-linux26: cross-depmod26 $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep $(LINUX26_TARGET)
-
-linux26-source: $(DL_DIR)/$(LINUX26_SOURCE)
-
-# This has been renamed so we do _NOT_ by default run this on 'make clean'
-linux26clean:
- rm -f $(LINUX26_TARGET)
- rm -f $(PROJECT_BUILD_DIR)/linux.bin
- rm -f $(LINUX26_DIR)/uImage
- -$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX26_DIR) clean
-
-linux26-dirclean:
- rm -f $(LINUX26_TARGET)
- rm -f $(PROJECT_BUILD_DIR)/linux.bin
- rm -rf $(LINUX26_DIR)
-
-linux-update:
- cp -dpf $(LINUX26_DIR)/.config $(LINUX26_KCONFIG)
-
-linux-test:
- @echo "LINUX_HEADERS_VERSION" $(LINUX_HEADERS_VERSION)
- @echo "BR2_PACKAGE_LINUX" $(BR2_PACKAGE_LINUX)
- @echo "BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION" $(BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION)
- @echo "BR2_CUSTOM_LINUX26_VERSION" $(BR2_CUSTOM_LINUX26_VERSION)
- @echo "BR2_CUSTOM_LINUX26_RC_PATCH" $(BR2_CUSTOM_LINUX26_RC_PATCH)
- @echo "BR2_LINUX_BSP_PATCH" $(BR2_LINUX_BSP_PATCH)
- @echo "BR2_DOWNLOAD_LINUX26_VERSION" $(BR2_DOWNLOAD_LINUX26_VERSION)
- @echo "BR2_LINUX26_VERSION" $(BR2_LINUX26_VERSION)
- @echo "LINUX26_VERSION" $(LINUX26_VERSION)
- @echo "BR2_LINUX26_RC_PATCH" $(BR2_LINUX26_RC_PATCH)
- @echo "BR2_PACKAGE_LINUX26_KCONFIG" $(BR2_PACKAGE_LINUX_KCONFIG)
- @echo "LINUX26_KCONFIG" $(LINUX26_KCONFIG)
- @echo "BR2_LINUX_BIN_CUSTOM" $(BR2_LINUX_BIN_CUSTOM)
- @echo "BR2_PACKAGE_LINUX_FORMAT" $(BR2_PACKAGE_LINUX_FORMAT)
- @echo "BR2_LINUX_IN_ROOTFS" $(BR2_LINUX_IN_ROOTFS)
- @echo "BR2_LINUX_2_6_22_1" $(BR2_LINUX_2_6_22_1)
-