summaryrefslogtreecommitdiff
path: root/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-003-at91rm9200dk.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-003-at91rm9200dk.patch')
-rw-r--r--target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-003-at91rm9200dk.patch324
1 files changed, 324 insertions, 0 deletions
diff --git a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-003-at91rm9200dk.patch b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-003-at91rm9200dk.patch
new file mode 100644
index 000000000..8f14170fa
--- /dev/null
+++ b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-003-at91rm9200dk.patch
@@ -0,0 +1,324 @@
+diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/at91rm9200dk.c u-boot-2009.01/board/atmel/at91rm9200dk/at91rm9200dk.c
+--- u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/at91rm9200dk.c 2009-01-01 13:09:31.000000000 +0100
++++ u-boot-2009.01/board/atmel/at91rm9200dk/at91rm9200dk.c 2009-01-01 16:11:36.000000000 +0100
+@@ -3,6 +3,9 @@
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
++ * (C) Copyright 2008
++ * Ulf Samuelsson <ulf.samuelsson@atmel.com>
++ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+@@ -24,6 +27,10 @@
+
+ #include <common.h>
+ #include <asm/arch/AT91RM9200.h>
++#include <asm/arch/at91_pmc.h>
++#include <asm/arch/at91_pio.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/io.h>
+ #include <at91rm9200_net.h>
+ #include <dm9161.h>
+
+@@ -41,13 +48,13 @@
+
+ /* Correct IRDA resistor problem */
+ /* Set PA23_TXD in Output */
+- ((AT91PS_PIO) AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2;
++ at91_set_gpio_output(AT91_PIN_PA23, 1);
+
+ /* memory and cpu-speed are setup before relocation */
+ /* so we do _nothing_ here */
+
+ /* arch number of AT91RM9200DK-Board */
+- gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200DK;
++ gd->bd->bi_arch_number = AT91RM9200_BOARD;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+@@ -91,46 +98,58 @@
+ */
+ #if defined(CONFIG_CMD_NAND)
+ extern ulong nand_probe (ulong physadr);
++/* set the bus interface characteristics based on
++ * tDS Data Set up Time 30 - ns
++ * tDH Data Hold Time 20 - ns
++ * tALS ALE Set up Time 20 - ns
++ * 16ns at 60 MHz ~= 3
++ */
+
+-#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */
+-void nand_init (void)
+-{
+- /* Setup Smart Media, fitst enable the address range of CS3 */
+- *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia;
+- /* set the bus interface characteristics based on
+- tDS Data Set up Time 30 - ns
+- tDH Data Hold Time 20 - ns
+- tALS ALE Set up Time 20 - ns
+- 16ns at 60 MHz ~= 3 */
+ /*memory mapping structures */
+ #define SM_ID_RWH (5 << 28)
+ #define SM_RWH (1 << 28)
+ #define SM_RWS (0 << 24)
+ #define SM_TDF (1 << 8)
+ #define SM_NWS (3)
+- AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS |
+- AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 |
+- SM_TDF | AT91C_SMC2_WSEN | SM_NWS);
++
++#define SMARTMEDIA_INIT ( \
++ SM_RWH | \
++ SM_RWS | \
++ AT91C_SMC2_ACSS_STANDARD | \
++ AT91C_SMC2_DBW_8 | \
++ SM_TDF | \
++ AT91C_SMC2_WSEN | \
++ SM_NWS \
++ )
++
++
++
++#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */
++void nand_init (void)
++{
++ /* Setup Smart Media, fitst enable the address range of CS3 */
++ /* *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia; */
++ at91_sys_setbit(AT91C_EBI_CS3A_SMC_SmartMedia, AT91_EBI_CSA);
++
++ /* Init Smartmedia Interface */
++ at91_sys_write(AT91_SMC2_CSR3, SMARTMEDIA_INIT);
+
+ /* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */
+- *AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
+- AT91C_PC3_BFBAA_SMWE;
+- *AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
+- AT91C_PC3_BFBAA_SMWE;
++ at91_set_A_periph(AT91_PIN_PC0, 0); /* BFCK */
++ at91_set_A_periph(AT91_PIN_PC1, 0); /* BFRDY/SMOE */
++ at91_set_A_periph(AT91_PIN_PC3, 0); /* BFBAA/SMWE */
+
+ /* Configure PC2 as input (signal READY of the SmartMedia) */
+- *AT91C_PIOC_PER = AT91C_PC2_BFAVD; /* enable direct output enable */
+- *AT91C_PIOC_ODR = AT91C_PC2_BFAVD; /* disable output */
++ at91_set_gpio_input(AT91_PIN_PC2, 0);
+
+ /* Configure PB1 as input (signal Card Detect of the SmartMedia) */
+- *AT91C_PIOB_PER = AT91C_PIO_PB1; /* enable direct output enable */
+- *AT91C_PIOB_ODR = AT91C_PIO_PB1; /* disable output */
++ at91_set_gpio_input(AT91_PIN_PB1, 0);
+
+ /* PIOB and PIOC clock enabling */
+- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
+- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC;
++ at91_sys_write(AT91_PMC_PCER, 1 << AT91RM9200_ID_PIOB);
++ at91_sys_write(AT91_PMC_PCER, 1 << AT91RM9200_ID_PIOC);
+
+- if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
++ if (at91_get_gpio_value(AT91_PIN_PB1))
+ printf (" No SmartMedia card inserted\n");
+ #ifdef DEBUG
+ printf (" SmartMedia card inserted\n");
+@@ -140,3 +159,4 @@
+ printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20);
+ }
+ #endif
++
+diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/led.c u-boot-2009.01/board/atmel/at91rm9200dk/led.c
+--- u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/led.c 2009-01-01 13:09:31.000000000 +0100
++++ u-boot-2009.01/board/atmel/at91rm9200dk/led.c 2009-01-01 15:53:56.000000000 +0100
+@@ -24,57 +24,105 @@
+
+ #include <common.h>
+ #include <asm/arch/AT91RM9200.h>
++/*#include <asm/arch/at91_pmc.h>*/
++#include <asm/arch/gpio.h>
++#include <asm/arch/io.h>
+
+-#define GREEN_LED AT91C_PIO_PB0
+-#define YELLOW_LED AT91C_PIO_PB1
+-#define RED_LED AT91C_PIO_PB2
++#define GREEN_LED AT91_PIN_PB0
++#define YELLOW_LED AT91_PIN_PB1
++#define RED_LED AT91_PIN_PB2
+
+-void green_LED_on(void)
++
++#define GREEN_LED_ON 0
++#define GREEN_LED_OFF 1
++#define YELLOW_LED_ON 0
++#define YELLOW_LED_OFF 1
++#define RED_LED_ON 0
++#define RED_LED_OFF 1
++
++#define TIME_SLICE 500000
++
++void yellow_LED_on(void)
++{
++ at91_set_gpio_value(YELLOW_LED, YELLOW_LED_ON);
++}
++
++void yellow_LED_off(void)
++{
++ at91_set_gpio_value(YELLOW_LED, YELLOW_LED_OFF);
++}
++
++void red_LED_on(void)
+ {
+- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
+- PIOB->PIO_CODR = GREEN_LED;
++ at91_set_gpio_value(RED_LED, RED_LED_ON);
+ }
+
+-void yellow_LED_on(void)
++void red_LED_off(void)
+ {
+- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
+- PIOB->PIO_CODR = YELLOW_LED;
++ at91_set_gpio_value(RED_LED, RED_LED_OFF);
+ }
+
+-void red_LED_on(void)
++void green_LED_on(void)
+ {
+- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
+- PIOB->PIO_CODR = RED_LED;
++ at91_set_gpio_value(GREEN_LED, GREEN_LED_ON);
+ }
+
+-void green_LED_off(void)
++void green_LED_off(void)
+ {
+- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
+- PIOB->PIO_SODR = GREEN_LED;
++ at91_set_gpio_value(GREEN_LED, GREEN_LED_OFF);
+ }
+
+-void yellow_LED_off(void)
++static void delay(unsigned int time)
+ {
+- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
+- PIOB->PIO_SODR = YELLOW_LED;
++ volatile unsigned int counter = time;
++ while(counter > 0) counter--;
+ }
+
+-void red_LED_off(void)
++void green_LED_blink(unsigned int time)
+ {
+- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
+- PIOB->PIO_SODR = RED_LED;
++ while(time > 0) {
++ green_LED_on();
++ delay(TIME_SLICE);
++ green_LED_off();
++ delay(TIME_SLICE);
++ time--;
++ }
+ }
+
++void yellow_LED_blink(unsigned int time)
++{
++ while(time > 0) {
++ yellow_LED_on();
++ delay(TIME_SLICE);
++ yellow_LED_off();
++ delay(TIME_SLICE);
++ time--;
++ }
++}
+
+-void coloured_LED_init (void)
++void red_LED_blink(unsigned int time)
+ {
+- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
+- AT91PS_PMC PMC = AT91C_BASE_PMC;
+- PMC->PMC_PCER = (1 << AT91C_ID_PIOB); /* Enable PIOB clock */
+- /* Disable peripherals on LEDs */
+- PIOB->PIO_PER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
+- /* Enable pins as outputs */
+- PIOB->PIO_OER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
+- /* Turn all LEDs OFF */
+- PIOB->PIO_SODR = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
++ while(time > 0) {
++ red_LED_on();
++ delay(TIME_SLICE);
++ red_LED_off();
++ delay(TIME_SLICE);
++ time--;
++ }
+ }
++
++void coloured_LED_init(void)
++{
++ /* Enable clock */
++ at91_sys_write(AT91C_PMC_PCER, 1 << AT91RM9200_ID_PIOB);
++
++ at91_set_gpio_output(GREEN_LED, 1);
++ at91_set_gpio_output(YELLOW_LED, 1);
++ at91_set_gpio_output(RED_LED, 1);
++
++ at91_set_gpio_value(GREEN_LED, GREEN_LED_OFF);
++ at91_set_gpio_value(YELLOW_LED, YELLOW_LED_OFF);
++ at91_set_gpio_value(RED_LED, RED_LED_ON);
++}
++
++
+diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/mux.c u-boot-2009.01/board/atmel/at91rm9200dk/mux.c
+--- u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/mux.c 2009-01-01 13:09:31.000000000 +0100
++++ u-boot-2009.01/board/atmel/at91rm9200dk/mux.c 2009-01-01 16:38:01.000000000 +0100
+@@ -1,37 +1,29 @@
+ #include <config.h>
+ #include <common.h>
+ #include <asm/hardware.h>
++#include <asm/arch/at91_pio.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/io.h>
+ #include <dataflash.h>
+
+ int AT91F_GetMuxStatus(void) {
+-#ifdef DATAFLASH_MMC_SELECT
+- AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT; /* Set in PIO mode */
+- AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT; /* Configure in output */
+-
+-
+- if(AT91C_BASE_PIOB->PIO_ODSR & DATAFLASH_MMC_SELECT) {
+- return 1;
+- } else {
+- return 0;
+- }
+-#endif
++#ifdef CONFIG_CMD_AT91_SPIMUX
++ return at91_get_gpio_value(DATAFLASH_MMC_SELECT);
++#else
+ return 0;
++#endif
+ }
+
+-void AT91F_SelectMMC(void) {
+-#ifdef DATAFLASH_MMC_SELECT
+- AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT; /* Set in PIO mode */
+- AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT; /* Configure in output */
+- /* Set Output */
+- AT91C_BASE_PIOB->PIO_SODR = DATAFLASH_MMC_SELECT;
++void AT91F_SelectMMC(void)
++{
++#ifdef CONFIG_CMD_AT91_SPIMUX
++ at91_set_gpio_output(DATAFLASH_MMC_SELECT, 1); /* Set in PIO mode and select SD-Card*/
+ #endif
+ }
+
+ void AT91F_SelectSPI(void) {
+-#ifdef DATAFLASH_MMC_SELECT
+- AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT; /* Set in PIO mode */
+- AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT; /* Configure in output */
+- /* Clear Output */
+- AT91C_BASE_PIOB->PIO_CODR = DATAFLASH_MMC_SELECT;
++#ifdef CONFIG_CMD_AT91_SPIMUX
++ at91_set_gpio_output(DATAFLASH_MMC_SELECT, 0); /* Set in PIO mode and select SPI */
+ #endif
+ }
++
+