summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/cloop/cloop.mk14
-rw-r--r--target/device/AMD/DBAu1500/linux26.mk4
-rw-r--r--target/device/Atmel/DataFlashBoot/DataflashBoot.mk2
-rw-r--r--target/device/Atmel/Makefile.in14
-rw-r--r--target/device/Atmel/at91bootstrap/at91bootstrap.mk28
-rw-r--r--target/device/Atmel/u-boot/u-boot.mk42
-rw-r--r--target/device/Sharp/LNode80/linux.mk24
-rw-r--r--target/device/Soekris/net4521/linux.mk24
-rw-r--r--target/device/Soekris/soekris_gpio/Makefile22
-rw-r--r--target/device/Via/epia-mii/linux.mk24
-rw-r--r--target/device/jp/q5/linux.mk24
-rw-r--r--target/ext2/ext2root.mk2
-rw-r--r--target/initramfs/initramfs.mk4
-rw-r--r--target/iso9660/iso9660.mk2
-rw-r--r--target/linux-experimental/Makefile.in122
-rw-r--r--target/linux/Makefile.in2
16 files changed, 177 insertions, 177 deletions
diff --git a/target/cloop/cloop.mk b/target/cloop/cloop.mk
index 180d43f72..5f55bf5a9 100644
--- a/target/cloop/cloop.mk
+++ b/target/cloop/cloop.mk
@@ -18,7 +18,7 @@ CLOOP_SITE=http://developer.linuxtag.net/knoppix/sources
CLOOP_TARGET:=$(IMAGE).cloop
### Note: not used yet! ck
### $(DL_DIR)/$(CLOOP_PATCH1):
-### $(WGET) -P $(DL_DIR) $(CLOOP_PATCH1_URL)/$(CLOOP_PATCH1)
+### $(WGET) -P $(DL_DIR) $(CLOOP_PATCH1_URL)/$(CLOOP_PATCH1)
$(DL_DIR)/$(CLOOP_SOURCE):
$(WGET) -P $(DL_DIR) $(CLOOP_SITE)/$(CLOOP_SOURCE)
@@ -26,8 +26,8 @@ $(DL_DIR)/$(CLOOP_SOURCE):
$(CLOOP_DIR)/.unpacked: $(DL_DIR)/$(CLOOP_SOURCE) ### $(DL_DIR)/$(CLOOP_PATCH1)
$(ZCAT) $(DL_DIR)/$(CLOOP_SOURCE) | tar -C $(BUILD_DIR) -xvf -
touch $@
-### $(ZCAT) $(DL_DIR)/$(CLOOP_PATCH1) | patch -p1 -d $(CLOOP_DIR)
-### toolchain/patch-kernel.sh $(CLOOP_DIR) target/cloop/ cloop\*.patch
+### $(ZCAT) $(DL_DIR)/$(CLOOP_PATCH1) | patch -p1 -d $(CLOOP_DIR)
+### toolchain/patch-kernel.sh $(CLOOP_DIR) target/cloop/ cloop\*.patch
$(CLOOP_DIR)/create_compressed_fs: $(CLOOP_DIR)/.unpacked
$(MAKE) CFLAGS="-Wall -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DUSE_ERROR_SILENT" -C $(CLOOP_DIR) \
@@ -63,7 +63,7 @@ cloop-module: $(CLOOP_DIR)/cloop.o
# mkisofs 2.01a34-unofficial-iconv from http://users.utu.fi/jahhein/mkisofs/
# optional:
# symlinks: scan/change symbolic links - v1.2 - by Mark Lord
-# from ftp://ftp.ibiblio.org/pub/Linux/utils/file/
+# from ftp://ftp.ibiblio.org/pub/Linux/utils/file/
#
#############################################################
@@ -119,7 +119,7 @@ clooproot-dirclean:
# other_fs: /mnt/compressed/var/tmp -> /tmp
#
# ls -lrsS root_fs_*.*
-# 1296 -rw-r--r-- 1 claus users 1325478 Mar 13 16:52 root_fs_powerpc.cloop
-# 1448 -rw-r--r-- 1 claus users 1482752 Mar 13 16:52 root_fs_powerpc.cramfs
-# 1840 -rw-r--r-- 1 claus users 1883408 Mar 13 13:14 root_fs_powerpc.jffs2
+# 1296 -rw-r--r-- 1 claus users 1325478 Mar 13 16:52 root_fs_powerpc.cloop
+# 1448 -rw-r--r-- 1 claus users 1482752 Mar 13 16:52 root_fs_powerpc.cramfs
+# 1840 -rw-r--r-- 1 claus users 1883408 Mar 13 13:14 root_fs_powerpc.jffs2
#############################################################
diff --git a/target/device/AMD/DBAu1500/linux26.mk b/target/device/AMD/DBAu1500/linux26.mk
index 7a457c7b0..7ef013f00 100644
--- a/target/device/AMD/DBAu1500/linux26.mk
+++ b/target/device/AMD/DBAu1500/linux26.mk
@@ -63,7 +63,7 @@ $(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked
#toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR)
touch $(LINUX26_DIR)/.patched
-$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
+$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
-cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig
touch $(LINUX26_DIR)/.configured
@@ -73,7 +73,7 @@ linux26-menuconfig: $(LINUX26_DIR)/.patched
$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig
-[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured
-$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured
+$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured
$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare
touch $(LINUX26_DIR)/.depend_done
diff --git a/target/device/Atmel/DataFlashBoot/DataflashBoot.mk b/target/device/Atmel/DataFlashBoot/DataflashBoot.mk
index 35fa7c343..716e147b8 100644
--- a/target/device/Atmel/DataFlashBoot/DataflashBoot.mk
+++ b/target/device/Atmel/DataFlashBoot/DataflashBoot.mk
@@ -5,7 +5,7 @@
#############################################################
DATAFLASHBOOT_VERSION:=1.05
DATAFLASHBOOT_NAME:=DataflashBoot-$(DATAFLASHBOOT_VERSION)
-ATMEL_MIRROR:=$(strip $(subst ",, $(BR2_ATMEL_MIRROR)))
+ATMEL_MIRROR:=$(strip $(subst ",, $(BR2_ATMEL_MIRROR)))
#"))
DATAFLASHBOOT_SITE:=$(ATMEL_MIRROR)/Source
DATAFLASHBOOT_SOURCE:=$(DATAFLASHBOOT_NAME).tar.bz2
diff --git a/target/device/Atmel/Makefile.in b/target/device/Atmel/Makefile.in
index e920be933..728c51c9e 100644
--- a/target/device/Atmel/Makefile.in
+++ b/target/device/Atmel/Makefile.in
@@ -3,9 +3,9 @@
ifeq ($(strip $(BR2_TARGET_ATMEL)),y)
ATMEL_PATH:=target/device/Atmel
-BOARD_NAME:=$(strip $(subst ",, $(BR2_BOARD_NAME)))
+BOARD_NAME:=$(strip $(subst ",, $(BR2_BOARD_NAME)))
#"))
-BOARD_PATH:=$(strip $(subst ",, $(BR2_BOARD_PATH)))
+BOARD_PATH:=$(strip $(subst ",, $(BR2_BOARD_PATH)))
#"))
ATMEL_TARGET:=$(ATMEL_PATH)/root
@@ -13,24 +13,24 @@ TARGET_SKELETON:=$(ATMEL_TARGET)/target_skeleton
TARGET_DEVICE_TABLE:=$(ATMEL_TARGET)/device_table.txt
TARGET_SKELETON_LINKS:=$(ATMEL_TARGET)/skel.tar.gz
-TARGET_ATMEL_COPYTO:=$(strip $(subst ",, $(BR2_TARGET_ATMEL_COPYTO)))
+TARGET_ATMEL_COPYTO:=$(strip $(subst ",, $(BR2_TARGET_ATMEL_COPYTO)))
# These are set by Config.in
-DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION)))
+DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION)))
#"))
ifeq ($(DOWNLOAD_LINUX26_VERSION),)
DOWNLOAD_LINUX26_VERSION=$(LINUX_HEADERS_VERSION)
endif
-LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION)))
+LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION)))
#"))
ifeq ($(LINUX26_VERSION),)
LINUX26_VERSION=$(LINUX_HEADERS_VERSION)
endif
-LINUX26_RC_PATCH:=$(strip $(subst ",, $(BR2_LINUX26_RC_PATCH)))
+LINUX26_RC_PATCH:=$(strip $(subst ",, $(BR2_LINUX26_RC_PATCH)))
#"))
-LINUX_BSP_PATCH:=$(strip $(subst ",, $(BR2_LINUX_BSP_ATMEL_PATCH)))
+LINUX_BSP_PATCH:=$(strip $(subst ",, $(BR2_LINUX_BSP_ATMEL_PATCH)))
#"))
# These are set by "new" Config.in
diff --git a/target/device/Atmel/at91bootstrap/at91bootstrap.mk b/target/device/Atmel/at91bootstrap/at91bootstrap.mk
index ee1212244..5faef4175 100644
--- a/target/device/Atmel/at91bootstrap/at91bootstrap.mk
+++ b/target/device/Atmel/at91bootstrap/at91bootstrap.mk
@@ -7,31 +7,31 @@ AT91BOOTSTRAP_VERSION:=2.3
AT91BOOTSTRAP_PATCH_LEVEL:=2
AT91BOOTSTRAP_PATCHED_VERSION:=$(AT91BOOTSTRAP_VERSION).$(AT91BOOTSTRAP_PATCH_LEVEL)
AT91BOOTSTRAP_NAME:=at91bootstrap-$(AT91BOOTSTRAP_VERSION)
-ATMEL_MIRROR:=$(strip $(subst ",, $(BR2_ATMEL_MIRROR)))
+ATMEL_MIRROR:=$(strip $(subst ",, $(BR2_ATMEL_MIRROR)))
#"))
AT91BOOTSTRAP_SITE:=$(ATMEL_MIRROR)/Source
AT91BOOTSTRAP_SOURCE:=$(AT91BOOTSTRAP_NAME).tar.bz2
AT91BOOTSTRAP_DIR:=$(PROJECT_BUILD_DIR)/$(AT91BOOTSTRAP_NAME)
-AT91BOOTSTRAP:=$(strip $(subst ",, $(BR2_AT91BOOTSTRAP)))
+AT91BOOTSTRAP:=$(strip $(subst ",, $(BR2_AT91BOOTSTRAP)))
#"))
AT91BOOTSTRAP_ZCAT:=bzcat
-AT91BOOTSTRAP_MEMORY:=$(strip $(subst ",, $(BR2_TARGET_AT91BOOTSTRAP_MEMORY)))
+AT91BOOTSTRAP_MEMORY:=$(strip $(subst ",, $(BR2_TARGET_AT91BOOTSTRAP_MEMORY)))
#"))
AT91BOOTSTRAP_BINARY:=$(BOARD_NAME)-$(AT91BOOTSTRAP_MEMORY)boot-$(AT91BOOTSTRAP_PATCHED_VERSION).bin
AT91BOOTSTRAP_TARGET:=$(AT91BOOTSTRAP_DIR)/binaries/$(AT91BOOTSTRAP_BINARY)
-AT91BOOTSTRAP_JUMP_ADDR:=$(strip $(subst ",, $(BR2_AT91BOOTSTRAP_JUMP_ADDR)))
-AT91BOOTSTRAP_IMG_SIZE:=$(strip $(subst ",, $(BR2_AT91BOOTSTRAP_IMG_SIZE)))
+AT91BOOTSTRAP_JUMP_ADDR:=$(strip $(subst ",, $(BR2_AT91BOOTSTRAP_JUMP_ADDR)))
+AT91BOOTSTRAP_IMG_SIZE:=$(strip $(subst ",, $(BR2_AT91BOOTSTRAP_IMG_SIZE)))
AT91_CUSTOM_FLAGS:=
ifneq ($(AT91BOOTSTRAP_JUMP_ADDR),)
-AT91_CUSTOM_FLAGS+=-DJUMP_ADDR=$(AT91BOOTSTRAP_JUMP_ADDR)
+AT91_CUSTOM_FLAGS+=-DJUMP_ADDR=$(AT91BOOTSTRAP_JUMP_ADDR)
endif
ifneq ($(AT91BOOTSTRAP_IMG_SIZE),)
-AT91_CUSTOM_FLAGS+=-DIMG_SIZE=$(AT91BOOTSTRAP_IMG_SIZE)
+AT91_CUSTOM_FLAGS+=-DIMG_SIZE=$(AT91BOOTSTRAP_IMG_SIZE)
endif
$(DL_DIR)/$(AT91BOOTSTRAP_SOURCE):
@@ -47,16 +47,16 @@ atbu: $(AT91BOOTSTRAP_DIR)/.unpacked
$(AT91BOOTSTRAP_DIR)/.configured: $(AT91BOOTSTRAP_DIR)/.unpacked .config
$(MAKE) \
- MEMORY=$(AT91BOOTSTRAP_MEMORY) \
- CROSS_COMPILE=$(TARGET_CROSS) \
- -C $(AT91BOOTSTRAP_DIR) \
+ MEMORY=$(AT91BOOTSTRAP_MEMORY) \
+ CROSS_COMPILE=$(TARGET_CROSS) \
+ -C $(AT91BOOTSTRAP_DIR) \
$(BOARD_NAME)_defconfig
touch $(AT91BOOTSTRAP_DIR)/.configured
$(AT91BOOTSTRAP_TARGET): $(AT91BOOTSTRAP_DIR)/.configured
$(MAKE) \
- MEMORY=$(AT91BOOTSTRAP_MEMORY) \
- CROSS_COMPILE=$(TARGET_CROSS) \
+ MEMORY=$(AT91BOOTSTRAP_MEMORY) \
+ CROSS_COMPILE=$(TARGET_CROSS) \
AT91_CUSTOM_FLAGS="$(AT91_CUSTOM_FLAGS)" \
-C $(AT91BOOTSTRAP_DIR)
@@ -65,13 +65,13 @@ $(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY): $(AT91BOOTSTRAP_TARGET)
cp $(AT91BOOTSTRAP_TARGET) $(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
cp $(AT91BOOTSTRAP_TARGET) /tftpboot/$(AT91BOOTSTRAP_BINARY)
-.PHONY: at91bootstrap at91bootstrap-source
+.PHONY: at91bootstrap at91bootstrap-source
at91bootstrap: $(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
at91bootstrap-source: $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE)
-.PHONY: at91bootstrap-clean at91bootstrap-dirclean
+.PHONY: at91bootstrap-clean at91bootstrap-dirclean
at91bootstrap-clean:
make -C $(AT91BOOTSTRAP_DIR) clean
diff --git a/target/device/Atmel/u-boot/u-boot.mk b/target/device/Atmel/u-boot/u-boot.mk
index 35b9f2166..5bd1ce278 100644
--- a/target/device/Atmel/u-boot/u-boot.mk
+++ b/target/device/Atmel/u-boot/u-boot.mk
@@ -1,14 +1,14 @@
#############################################################
#
# u-boot mkimage to build to target u-boot filesystems and
-#
-# u-boot.bin - the boot loader for the target - which needs soft float, so
-# we won't make it.
+#
+# u-boot.bin - the boot loader for the target - which needs soft float, so
+# we won't make it.
#
#
#############################################################
UBOOT_VERSION:=1.2.0-atmel
-ATMEL_MIRROR:=$(strip $(subst ",, $(BR2_ATMEL_MIRROR)))
+ATMEL_MIRROR:=$(strip $(subst ",, $(BR2_ATMEL_MIRROR)))
#"))
UBOOT_DIR:=$(BUILD_DIR)/u-boot-$(UBOOT_VERSION)
UBOOT_BUILD_DIR:=$(PROJECT_BUILD_DIR)/u-boot-$(UBOOT_VERSION)
@@ -30,15 +30,15 @@ UBOOT_PATCHES:=$(PROJECT_BUILD_DIR)/u-boot-patches
UBOOT_ATMEL_BMP:=$(UBOOT_PATCHES)/atmel.bmp
UBOOT_SCR=$(BINARIES_DIR)/autoscript
-TARGET_UBOOT_IPADDR:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_IPADDR)))
+TARGET_UBOOT_IPADDR:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_IPADDR)))
#"))
-TARGET_UBOOT_SERVERIP:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_SERVERIP)))
+TARGET_UBOOT_SERVERIP:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_SERVERIP)))
#"))
-TARGET_UBOOT_GATEWAY:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_GATEWAY)))
+TARGET_UBOOT_GATEWAY:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_GATEWAY)))
#"))
-TARGET_UBOOT_NETMASK:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_NETMASK)))
+TARGET_UBOOT_NETMASK:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_NETMASK)))
#"))
-TARGET_UBOOT_ETHADDR:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_ETHADDR)))
+TARGET_UBOOT_ETHADDR:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_ETHADDR)))
#"))
UBOOT_CUSTOM:=$(UBOOT_DIR)/include/custom.h
@@ -61,9 +61,9 @@ $(UBOOT_PATCHES)/.unpacked: $(DL_DIR)/$(UBOOT_PATCH_SOURCE)
$(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE): $(UBOOT_DIR)/.unpacked $(UBOOT_PATCHES)/.unpacked
toolchain/patch-kernel.sh $(UBOOT_DIR) $(UBOOT_PATCHES) *.patch
touch $(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE)
-# cp $(UBOOT_CONFIG_FILE) $(UBOOT_DIR)/include/configs/.
-# cp $(UBOOT_PATCHES)/cmd_defenv.c $(UBOOT_DIR)/common/.
-# cp $(UBOOT_ATMEL_BMP) $(UBOOT_DIR)/tools/logos/.
+# cp $(UBOOT_CONFIG_FILE) $(UBOOT_DIR)/include/configs/.
+# cp $(UBOOT_PATCHES)/cmd_defenv.c $(UBOOT_DIR)/common/.
+# cp $(UBOOT_ATMEL_BMP) $(UBOOT_DIR)/tools/logos/.
$(UBOOT_BUILD_DIR)/.configured: $(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE)
ifneq ($(strip $(UBOOT_CONFIG_FILE)),)
@@ -76,7 +76,7 @@ endif
$(UBOOT_CONFIG)
$(SED) 's/ $$(SREC) $$(BIN)//' $(UBOOT_DIR)/examples/Makefile
touch $(UBOOT_BUILD_DIR)/.configured
-# $(MAKE) O=$(UBOOT_BUILD_DIR) -C $(UBOOT_DIR)
+# $(MAKE) O=$(UBOOT_BUILD_DIR) -C $(UBOOT_DIR)
$(MKIMAGE_BINLOC): $(UBOOT_BUILD_DIR)/.configured
$(MAKE) \
@@ -167,17 +167,17 @@ endif
$(UBOOT_SCR).$(PROJECT): $(UBOOT_SCR) $(MKIMAGE)
$(MKIMAGE) -A arm \
- -O linux \
- -T script \
- -C none \
- -a 0 \
- -e 0 \
+ -O linux \
+ -T script \
+ -C none \
+ -a 0 \
+ -e 0 \
-n "autoscr config" \
- -d $(UBOOT_SCR) \
+ -d $(UBOOT_SCR) \
$(UBOOT_SCR).$(PROJECT)
cp $(UBOOT_SCR).$(PROJECT) /tftpboot
-$(MKIMAGE): $(MKIMAGE_BINLOC)
+$(MKIMAGE): $(MKIMAGE_BINLOC)
cp -f $(MKIMAGE_BINLOC) $(MKIMAGE)
uboot: $(MKIMAGE) uboot-bin $(UBOOT_SCR).$(PROJECT)
@@ -191,7 +191,7 @@ uboot-clean:
rm -fr $(UBOOT_DIR)
rm -f $(UBOOT_SCR)
rm -f $(UBOOT_SCR).$(PROJECT)
-# -$(MAKE) -C $(UBOOT_DIR)/uboot-tools clean
+# -$(MAKE) -C $(UBOOT_DIR)/uboot-tools clean
uboot-dirclean: uboot-clean
rm -rf $(UBOOT_DIR)
diff --git a/target/device/Sharp/LNode80/linux.mk b/target/device/Sharp/LNode80/linux.mk
index 3fd52193e..4dcef714b 100644
--- a/target/device/Sharp/LNode80/linux.mk
+++ b/target/device/Sharp/LNode80/linux.mk
@@ -2,21 +2,21 @@
#
# Linux kernel targets
#
-# Note: If you have any patches to apply, create the directory
+# Note: If you have any patches to apply, create the directory
# sources/kernel-patches and put your patches in there and number
-# them in the order you wish to apply them... i.e.
+# them in the order you wish to apply them... i.e.
#
-# sources/kernel-patches/001-my-special-stuff.bz2
-# sources/kernel-patches/003-gcc-Os.bz2
-# sources/kernel-patches/004_no-warnings.bz2
-# sources/kernel-patches/030-lowlatency-mini.bz2
-# sources/kernel-patches/031-lowlatency-fixes-5.bz2
-# sources/kernel-patches/099-shutup.bz2
-# etc...
+# sources/kernel-patches/001-my-special-stuff.bz2
+# sources/kernel-patches/003-gcc-Os.bz2
+# sources/kernel-patches/004_no-warnings.bz2
+# sources/kernel-patches/030-lowlatency-mini.bz2
+# sources/kernel-patches/031-lowlatency-fixes-5.bz2
+# sources/kernel-patches/099-shutup.bz2
+# etc...
#
# these patches will all be applied by the patch-kernel.sh
# script (which will also abort the build if it finds rejects)
-# -Erik
+# -Erik
#
#############################################################
ifneq ($(filter $(TARGETS),linux),)
@@ -79,14 +79,14 @@ $(LINUX_KCONFIG):
sleep 5; \
fi
-$(LINUX_DIR)/.configured $(BUILD_DIR)/linux/.configured: $(LINUX_DIR)/.unpacked $(LINUX_KCONFIG)
+$(LINUX_DIR)/.configured $(BUILD_DIR)/linux/.configured: $(LINUX_DIR)/.unpacked $(LINUX_KCONFIG)
$(SED) "s,^ARCH.*,ARCH=$(LINUX_KARCH),g;" $(LINUX_DIR)/Makefile
$(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/Makefile
-cp $(LINUX_KCONFIG) $(LINUX_DIR)/.config
$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) oldconfig include/linux/version.h
touch $(LINUX_DIR)/.configured
-$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.configured
+$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.configured
$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) dep
touch $(LINUX_DIR)/.depend_done
diff --git a/target/device/Soekris/net4521/linux.mk b/target/device/Soekris/net4521/linux.mk
index bda61788b..8e0b3be97 100644
--- a/target/device/Soekris/net4521/linux.mk
+++ b/target/device/Soekris/net4521/linux.mk
@@ -2,21 +2,21 @@
#
# Linux kernel targets
#
-# Note: If you have any patches to apply, create the directory
+# Note: If you have any patches to apply, create the directory
# sources/kernel-patches and put your patches in there and number
-# them in the order you wish to apply them... i.e.
+# them in the order you wish to apply them... i.e.
#
-# sources/kernel-patches/001-my-special-stuff.bz2
-# sources/kernel-patches/003-gcc-Os.bz2
-# sources/kernel-patches/004_no-warnings.bz2
-# sources/kernel-patches/030-lowlatency-mini.bz2
-# sources/kernel-patches/031-lowlatency-fixes-5.bz2
-# sources/kernel-patches/099-shutup.bz2
-# etc...
+# sources/kernel-patches/001-my-special-stuff.bz2
+# sources/kernel-patches/003-gcc-Os.bz2
+# sources/kernel-patches/004_no-warnings.bz2
+# sources/kernel-patches/030-lowlatency-mini.bz2
+# sources/kernel-patches/031-lowlatency-fixes-5.bz2
+# sources/kernel-patches/099-shutup.bz2
+# etc...
#
# these patches will all be applied by the patch-kernel.sh
# script (which will also abort the build if it finds rejects)
-# -Erik
+# -Erik
#
#############################################################
ifneq ($(filter $(TARGETS),linux),)
@@ -80,14 +80,14 @@ $(LINUX_KCONFIG):
sleep 5; \
fi
-$(LINUX_DIR)/.configured $(BUILD_DIR)/linux/.configured: $(LINUX_DIR)/.unpacked $(LINUX_KCONFIG)
+$(LINUX_DIR)/.configured $(BUILD_DIR)/linux/.configured: $(LINUX_DIR)/.unpacked $(LINUX_KCONFIG)
$(SED) "s,^ARCH.*,ARCH=$(LINUX_KARCH),g;" $(LINUX_DIR)/Makefile
$(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/Makefile
-cp $(LINUX_KCONFIG) $(LINUX_DIR)/.config
$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) oldconfig include/linux/version.h
touch $(LINUX_DIR)/.configured
-$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.configured
+$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.configured
$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) dep
touch $(LINUX_DIR)/.depend_done
diff --git a/target/device/Soekris/soekris_gpio/Makefile b/target/device/Soekris/soekris_gpio/Makefile
index d96c9b707..ac31bbfee 100644
--- a/target/device/Soekris/soekris_gpio/Makefile
+++ b/target/device/Soekris/soekris_gpio/Makefile
@@ -5,32 +5,32 @@
include $(LINUX_KCONFIG)
-CFLAGS =-O2 -DMODULE -D__KERNEL__ -I$(LINUX_SOURCE_DIR)/include -Wall
+CFLAGS =-O2 -DMODULE -D__KERNEL__ -I$(LINUX_SOURCE_DIR)/include -Wall
TARGET := gpio
ifdef CONFIG_SMP
CFLAGS +=-D__SMP__-DSMP
endif
-all: gpio.o writelcd.o
+all: gpio.o writelcd.o
gpio.o: common.o 4501driver.o 4801driver.o
- $(LD) -r 4501driver.o 4801driver.o common.o -o gpio.o
+ $(LD) -r 4501driver.o 4801driver.o common.o -o gpio.o
-4501gpio.o: common.o 4501driver.o
- $(LD) -r 4501driver.o common.o -o 4501gpio.o
+4501gpio.o: common.o 4501driver.o
+ $(LD) -r 4501driver.o common.o -o 4501gpio.o
-4501driver.o: 4501driver.c 4501driver.h
+4501driver.o: 4501driver.c 4501driver.h
$(CC) $(CFLAGS) -c 4501driver.c -o 4501driver.o
-4801gpio.o: common.o 4801driver.o
- $(LD) -r 4801driver.o common.o -o 4801gpio.o
+4801gpio.o: common.o 4801driver.o
+ $(LD) -r 4801driver.o common.o -o 4801gpio.o
-4801driver.o: 4801driver.c 4801driver.h
+4801driver.o: 4801driver.c 4801driver.h
$(CC) $(CFLAGS) -c 4801driver.c -o 4801driver.o
-writelcd.o: common_writelcd.o 4801driver.o 4501driver.o
- $(LD) -r 4801driver.o 4501driver.o common_writelcd.o -o writelcd.o
+writelcd.o: common_writelcd.o 4801driver.o 4501driver.o
+ $(LD) -r 4801driver.o 4501driver.o common_writelcd.o -o writelcd.o
common.o: common.c common.h
$(CC) $(CFLAGS) -c common.c -o common.o
diff --git a/target/device/Via/epia-mii/linux.mk b/target/device/Via/epia-mii/linux.mk
index 0fdd7c004..9b5ea4600 100644
--- a/target/device/Via/epia-mii/linux.mk
+++ b/target/device/Via/epia-mii/linux.mk
@@ -2,21 +2,21 @@
#
# Linux kernel targets
#
-# Note: If you have any patches to apply, create the directory
+# Note: If you have any patches to apply, create the directory
# sources/kernel-patches and put your patches in there and number
-# them in the order you wish to apply them... i.e.
+# them in the order you wish to apply them... i.e.
#
-# sources/kernel-patches/001-my-special-stuff.bz2
-# sources/kernel-patches/003-gcc-Os.bz2
-# sources/kernel-patches/004_no-warnings.bz2
-# sources/kernel-patches/030-lowlatency-mini.bz2
-# sources/kernel-patches/031-lowlatency-fixes-5.bz2
-# sources/kernel-patches/099-shutup.bz2
-# etc...
+# sources/kernel-patches/001-my-special-stuff.bz2
+# sources/kernel-patches/003-gcc-Os.bz2
+# sources/kernel-patches/004_no-warnings.bz2
+# sources/kernel-patches/030-lowlatency-mini.bz2
+# sources/kernel-patches/031-lowlatency-fixes-5.bz2
+# sources/kernel-patches/099-shutup.bz2
+# etc...
#
# these patches will all be applied by the patch-kernel.sh
# script (which will also abort the build if it finds rejects)
-# -Erik
+# -Erik
#
#############################################################
ifneq ($(filter $(TARGETS),linux),)
@@ -71,13 +71,13 @@ $(LINUX_KCONFIG):
$(MAKE) menuconfig; \
fi
-$(LINUX_DIR)/.configured $(BUILD_DIR)/linux/.configured: $(LINUX_DIR)/.unpacked $(LINUX_KCONFIG)
+$(LINUX_DIR)/.configured $(BUILD_DIR)/linux/.configured: $(LINUX_DIR)/.unpacked $(LINUX_KCONFIG)
$(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/Makefile
-cp $(LINUX_KCONFIG) $(LINUX_DIR)/.config
$(MAKE) -C $(LINUX_DIR) oldconfig include/linux/version.h
touch $(LINUX_DIR)/.configured
-$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.configured
+$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.configured
$(MAKE) -C $(LINUX_DIR) dep
touch $(LINUX_DIR)/.depend_done
diff --git a/target/device/jp/q5/linux.mk b/target/device/jp/q5/linux.mk
index 8e74a308a..3a277f8e0 100644
--- a/target/device/jp/q5/linux.mk
+++ b/target/device/jp/q5/linux.mk
@@ -2,21 +2,21 @@
#
# Linux kernel targets
#
-# Note: If you have any patches to apply, create the directory
+# Note: If you have any patches to apply, create the directory
# sources/kernel-patches and put your patches in there and number
-# them in the order you wish to apply them... i.e.
+# them in the order you wish to apply them... i.e.
#
-# sources/kernel-patches/001-my-special-stuff.bz2
-# sources/kernel-patches/003-gcc-Os.bz2
-# sources/kernel-patches/004_no-warnings.bz2
-# sources/kernel-patches/030-lowlatency-mini.bz2
-# sources/kernel-patches/031-lowlatency-fixes-5.bz2
-# sources/kernel-patches/099-shutup.bz2
-# etc...
+# sources/kernel-patches/001-my-special-stuff.bz2
+# sources/kernel-patches/003-gcc-Os.bz2
+# sources/kernel-patches/004_no-warnings.bz2
+# sources/kernel-patches/030-lowlatency-mini.bz2
+# sources/kernel-patches/031-lowlatency-fixes-5.bz2
+# sources/kernel-patches/099-shutup.bz2
+# etc...
#
# these patches will all be applied by the patch-kernel.sh
# script (which will also abort the build if it finds rejects)
-# -Erik
+# -Erik
#
#############################################################
ifneq ($(filter $(TARGETS),linux),)
@@ -80,7 +80,7 @@ $(LINUX_KCONFIG):
sleep 5; \
fi
-$(LINUX_DIR)/.configured $(BUILD_DIR)/linux/.configured: $(LINUX_DIR)/.unpacked $(LINUX_KCONFIG)
+$(LINUX_DIR)/.configured $(BUILD_DIR)/linux/.configured: $(LINUX_DIR)/.unpacked $(LINUX_KCONFIG)
$(SED) "s,^ARCH.*,ARCH=$(LINUX_KARCH),g;" $(LINUX_DIR)/Makefile
$(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/Makefile
-cp $(LINUX_KCONFIG) $(LINUX_DIR)/.config
@@ -90,7 +90,7 @@ endif
$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) oldconfig include/linux/version.h
touch $(LINUX_DIR)/.configured
-$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.configured
+$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.configured
$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) dep
touch $(LINUX_DIR)/.depend_done
diff --git a/target/ext2/ext2root.mk b/target/ext2/ext2root.mk
index 099108161..fd0016df8 100644
--- a/target/ext2/ext2root.mk
+++ b/target/ext2/ext2root.mk
@@ -58,7 +58,7 @@ ifneq ($(strip $(BR2_TARGET_ROOTFS_EXT2_RESBLKS)),)
EXT2_OPTS += -m $(strip $(BR2_TARGET_ROOTFS_EXT2_RESBLKS))
endif
-EXT2_BASE := $(subst ",,$(BR2_TARGET_ROOTFS_EXT2_OUTPUT))
+EXT2_BASE := $(subst ",,$(BR2_TARGET_ROOTFS_EXT2_OUTPUT))
#")
EXT2_ROOTFS_COMPRESSOR:=
diff --git a/target/initramfs/initramfs.mk b/target/initramfs/initramfs.mk
index 8dd75b5a5..5476b23cb 100644
--- a/target/initramfs/initramfs.mk
+++ b/target/initramfs/initramfs.mk
@@ -1,7 +1,7 @@
#############################################################
#
# Make a initramfs_list file to be used by gen_init_cpio
-# gen_init_cpio is part of the 2.6 linux kernels to build an
+# gen_init_cpio is part of the 2.6 linux kernels to build an
# initial ramdisk filesystem based on cpio
#
#############################################################
@@ -31,7 +31,7 @@ endif
# Use fakeroot to pretend to create all needed device nodes
echo "$(STAGING_DIR)/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
>> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
- # Use fakeroot so gen_initramfs_list.sh believes the previous fakery
+ # Use fakeroot so gen_initramfs_list.sh believes the previous fakery
echo "$(CONFIG_SHELL) target/initramfs/gen_initramfs_list.sh -u 0 -g 0 $(TARGET_DIR) > $(INITRAMFS_TARGET)" \
>> $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
chmod a+x $(PROJECT_BUILD_DIR)/_fakeroot.$(notdir $(TAR_TARGET))
diff --git a/target/iso9660/iso9660.mk b/target/iso9660/iso9660.mk
index 4d468dcab..9cdf486fa 100644
--- a/target/iso9660/iso9660.mk
+++ b/target/iso9660/iso9660.mk
@@ -22,7 +22,7 @@ $(MKISOFS_DIR)/.unpacked: $(DL_DIR)/$(MKISOFS_SOURCE)
$(MKISOFS_DIR)/.configured: $(MKISOFS_DIR)/.unpacked
(cd $(MKISOFS_DIR); rm -rf config.cache; \
)
- touch $(MKISOFS_DIR)/.configured
+ touch $(MKISOFS_DIR)/.configured
$(MKISOFS_TARGET): $(MKISOFS_DIR)/.configured
$(MAKE) -C $(MKISOFS_DIR)
diff --git a/target/linux-experimental/Makefile.in b/target/linux-experimental/Makefile.in
index 6f37aa74c..ab9a6135d 100644
--- a/target/linux-experimental/Makefile.in
+++ b/target/linux-experimental/Makefile.in
@@ -9,13 +9,13 @@ ifneq ($(filter $(TARGETS),linux26),)
ifeq ($(LINUX_HEADERS_VERSION),)
# Version of Linux to download and then apply patches to
# XXX: andersee, i do not understand why we need this (BF)
-DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION)))
+DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION)))
# "))
-LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION)))
+LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION)))
# "))
-LINUX26_RC_PATCH:=$(strip $(subst ",, $(BR2_LINUX26_RC_PATCH)))
+LINUX26_RC_PATCH:=$(strip $(subst ",, $(BR2_LINUX26_RC_PATCH)))
# "))
-LINUX_BSP_PATCH:=$(strip $(subst ",, $(BR2_LINUX_BSP_ATMEL_PATCH)))
+LINUX_BSP_PATCH:=$(strip $(subst ",, $(BR2_LINUX_BSP_ATMEL_PATCH)))
# " ))
MKIMAGE:=$(BUILD_DIR)/mkimage
@@ -26,13 +26,13 @@ endif
LINUX26_VERSION=$(DOWNLOAD_LINUX26_VERSION)
-else # ---------------------------------------------------
+else # ---------------------------------------------------
# Define DOWNLOAD_LINUX26_VERSION unless defined
ifeq ($(strip $(BR2_DOWNLOAD_LINUX26_VERSION)),)
DOWNLOAD_LINUX26_VERSION=$(LINUX_HEADERS_VERSION)
else
-DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION)))
+DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION)))
# "))
endif
@@ -41,15 +41,15 @@ endif
ifeq ($(strip $(BR2_LINUX26_VERSION)),)
LINUX26_VERSION=$(LINUX_HEADERS_VERSION)
else
-LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION)))
+LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION)))
# "))
endif
-endif # ---------------------------------------------------
+endif # ---------------------------------------------------
# Handle case when we want to build using an "rc" patch
# Example: to build 2.6.21-rc1 you need to:
-# * Download linux-2.6.20
+# * Download linux-2.6.20
# * Apply patch-2.6.21-rc1
LINUX26_SOURCE:=linux-$(DOWNLOAD_LINUX26_VERSION).tar.bz2
@@ -57,7 +57,7 @@ LINUX26_SITE=http://ftp.kernel.org/pub/linux/kernel/v2.6
LINUX26_BZCAT:=$(BZCAT)
# Linux kernel binary
-LINUX26_FORMAT:=$(strip $(subst ",, $(BR2_LINUX26_FORMAT)))
+LINUX26_FORMAT:=$(strip $(subst ",, $(BR2_LINUX26_FORMAT)))
# " ))
# Linux kernel configuration file
@@ -102,11 +102,11 @@ LINUX_DIR=$(LINUX26_DIR)
LINUX_KERNEL=$(LINUX26_KERNEL)
# kernel patches
-ifeq ($(strip $(subst ",, $(LINUX26_PATCH_DIR))),)
+ifeq ($(strip $(subst ",, $(LINUX26_PATCH_DIR))),)
# ")))
LINUX26_PATCH_DIR:=$(BR2_BOARD_PATH)/kernel-patches/
endif
-PATCH_DIR=$(strip $(subst ",, $(LINUX26_PATCH_DIR)))
+PATCH_DIR=$(strip $(subst ",, $(LINUX26_PATCH_DIR)))
# " ))
LINUX26_MAKE_FLAGS = $(TARGET_CONFIGURE_OPTS) ARCH=$(KERNEL_ARCH) \
@@ -120,24 +120,24 @@ $(LINUX26_KCONFIG):
echo "and install it as $(LINUX26_KCONFIG)"; \
echo ""; \
sleep 5; \
- fi;
+ fi
# Check if we have a release candidate.
-# This makes life complex
-# To build linux-2.6.21-rc2 you need to:
-# * Download linux.2.6.20.tar.bz2
-# * Download patch-2.6.21-rc2.bz2
-# I:E you have to download the *previous* major version
-
-ifneq ($(LINUX26_RC_PATCH),)
+# This makes life complex
+# To build linux-2.6.21-rc2 you need to:
+# * Download linux.2.6.20.tar.bz2
+# * Download patch-2.6.21-rc2.bz2
+# I:E you have to download the *previous* major version
+
+ifneq ($(LINUX26_RC_PATCH),)
# We have a "release candidate"
LINUX26_RC_PATCH_SOURCE:=$(PROJECT_BUILD_DIR)/linux-patch/$(LINUX26_RC_PATCH)
# Create rule to download the patch
$(LINUX26_RC_PATCH_SOURCE):
mkdir -p $(PROJECT_BUILD_DIR)/linux-patch/
- $(WGET) -P $(PROJECT_BUILD_DIR)/linux-patch $(LINUX26_SITE)/$(LINUX26_RC_PATCH)
-# $(LINUX26_BZCAT) $(PROJECT_BUILD_DIR)/linux-patch/$(LINUX26_RC_PATCH).bz2
+ $(WGET) -P $(PROJECT_BUILD_DIR)/linux-patch $(LINUX26_SITE)/$(LINUX26_RC_PATCH)
+# $(LINUX26_BZCAT) $(PROJECT_BUILD_DIR)/linux-patch/$(LINUX26_RC_PATCH).bz2
else
# We have a vanilla style linux kernel
LINUX26_RC_PATCH_SOURCE:=
@@ -155,7 +155,7 @@ ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION))
# Rename the dir from the downloaded version to the AFTER patch version
mv -f $(LINUX26_BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(LINUX26_DIR)
endif
-ifneq ($(LINUX26_RC_PATCH),)
+ifneq ($(LINUX26_RC_PATCH),)
-(cd $(LINUX26_DIR); $(LINUX26_BZCAT) $(LINUX26_RC_PATCH_SOURCE) | patch -p1)
endif
-(cd $(TOOL_BUILD_DIR); ln -snf $(LINUX26_DIR) linux)
@@ -168,7 +168,7 @@ $(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked
toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR)
touch $@
-$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
+$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
-ls -l $(LINUX26_DIR)/.patched
-ls -l $(LINUX26_KCONFIG)
-ls -l $(LINUX26_DIR)/.configured
@@ -194,7 +194,7 @@ endif
$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig include/linux/version.h
touch $@
-$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured
+$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured
$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare
touch $@
@@ -211,8 +211,8 @@ $(LINUX26_DIR)/vmlinux: $(LINUX26_DIR)/.depend_done $(STAGING_DIR)/include/linux
#-----------------------------------------------------------------------------------
-# Rule can be enabled by setting
-# LINUX26_TARGET:= $(TARGET_DIR)/boot/$(LINUX26_BINLOC)
+# Rule can be enabled by setting
+# LINUX26_TARGET:= $(TARGET_DIR)/boot/$(LINUX26_BINLOC)
#
$(TARGET_DIR)/boot/$(LINUX26_FORMAT): $(LINUX26_DIR)/$(LINUX26_FORMAT)
[ -d $(TARGET_DIR)/boot/ ] || mkdir $(TARGET_DIR)/boot
@@ -220,33 +220,33 @@ $(TARGET_DIR)/boot/$(LINUX26_FORMAT): $(LINUX26_DIR)/$(LINUX26_FORMAT)
touch -c $@
#-----------------------------------------------------------------------------------
-# Rule can be enabled by setting
-# LINUX26_TARGET:= $(BINARIES_DIR)/$(LINUX26_KERNEL)
-# LINUX26_FORMAT:= vmlinux
+# Rule can be enabled by setting
+# LINUX26_TARGET:= $(BINARIES_DIR)/$(LINUX26_KERNEL)
+# LINUX26_FORMAT:= vmlinux
-$(BINARIES_DIR)/$(LINUX26_KERNEL): $(LINUX26_DIR)/uImage
+$(BINARIES_DIR)/$(LINUX26_KERNEL): $(LINUX26_DIR)/uImage
cp -dpf $(LINUX26_DIR)/uImage $(BINARIES_DIR)/$(LINUX26_KERNEL)
cp -dpf $(LINUX26_DIR)/uImage /tftpboot/$(LINUX26_KERNEL)
- mkdir -p $(TARGET_DIR)/boot/
+ mkdir -p $(TARGET_DIR)/boot/
cp -dpf $(LINUX26_DIR)/.config $(TARGET_DIR)/boot/$(BOARD_NAME)-linux-$(LINUX26_VERSION).config
- cp -dpf .config $(TARGET_DIR)/boot/$(BOARD_NAME)-buildroot.config
- cp -dpf $(BUSYBOX_DIR)/.config $(TARGET_DIR)/boot/busybox.config
+ cp -dpf .config $(TARGET_DIR)/boot/$(BOARD_NAME)-buildroot.config
+ cp -dpf $(BUSYBOX_DIR)/.config $(TARGET_DIR)/boot/busybox.config
$(PROJECT_BUILD_DIR)/linux.bin: $(LINUX26_DIR)/vmlinux
${KERNEL_CROSS}objcopy -O binary -S $(LINUX26_DIR)/vmlinux $(PROJECT_BUILD_DIR)/linux.bin
-$(LINUX26_DIR)/uImage: $(LINUX26_DIR)/arch/$(ARCH)/boot/uImage
- cp -dpf $(LINUX26_DIR)/arch/$(ARCH)/boot/uImage $(LINUX26_DIR)/uImage
-
+$(LINUX26_DIR)/uImage: $(LINUX26_DIR)/arch/$(ARCH)/boot/uImage
+ cp -dpf $(LINUX26_DIR)/arch/$(ARCH)/boot/uImage $(LINUX26_DIR)/uImage
+
-$(PROJECT_BUILD_DIR)/xxxx: $(PROJECT_BUILD_DIR)/linux.bin $(MKIMAGE)
+$(PROJECT_BUILD_DIR)/xxxx: $(PROJECT_BUILD_DIR)/linux.bin $(MKIMAGE)
gzip -v9 -c $(PROJECT_BUILD_DIR)/linux.bin > $(PROJECT_BUILD_DIR)/linux.bin.gz
- $(MKIMAGE) -A $(ARCH) \
- -O linux \
- -C gzip \
- -a 0x20008000 \
- -e 0x20008000 \
- -d $(PROJECT_BUILD_DIR)/linux.bin.gz \
+ $(MKIMAGE) -A $(ARCH) \
+ -O linux \
+ -C gzip \
+ -a 0x20008000 \
+ -e 0x20008000 \
+ -d $(PROJECT_BUILD_DIR)/linux.bin.gz \
$(LINUX26_DIR)/uImage
rm -f $(PROJECT_BUILD_DIR)/linux.bin.gz
#-----------------------------------------------------------------------------------
@@ -296,23 +296,23 @@ linux26-dirclean:
rm -rf $(LINUX26_DIR)
linux-update:
- cp -dpf $(LINUX26_DIR)/.config $(LINUX26_KCONFIG)
+ cp -dpf $(LINUX26_DIR)/.config $(LINUX26_KCONFIG)
linux-test:
- @echo "LINUX_HEADERS_VERSION" $(LINUX_HEADERS_VERSION)
- @echo "BR2_PACKAGE_LINUX" $(BR2_PACKAGE_LINUX)
- @echo "BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION" $(BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION)
- @echo "BR2_CUSTOM_LINUX26_VERSION" $(BR2_CUSTOM_LINUX26_VERSION)
- @echo "BR2_CUSTOM_LINUX26_RC_PATCH" $(BR2_CUSTOM_LINUX26_RC_PATCH)
- @echo "BR2_LINUX_BSP_PATCH" $(BR2_LINUX_BSP_PATCH)
- @echo "BR2_DOWNLOAD_LINUX26_VERSION" $(BR2_DOWNLOAD_LINUX26_VERSION)
- @echo "BR2_LINUX26_VERSION" $(BR2_LINUX26_VERSION)
- @echo "LINUX26_VERSION" $(LINUX26_VERSION)
- @echo "BR2_LINUX26_RC_PATCH" $(BR2_LINUX26_RC_PATCH)
- @echo "BR2_PACKAGE_LINUX26_KCONFIG" $(BR2_PACKAGE_LINUX_KCONFIG)
- @echo "LINUX26_KCONFIG" $(LINUX26_KCONFIG)
- @echo "BR2_LINUX_BIN_CUSTOM" $(BR2_LINUX_BIN_CUSTOM)
- @echo "BR2_PACKAGE_LINUX_FORMAT" $(BR2_PACKAGE_LINUX_FORMAT)
- @echo "BR2_LINUX_IN_ROOTFS" $(BR2_LINUX_IN_ROOTFS)
- @echo "BR2_LINUX_2_6_22_1" $(BR2_LINUX_2_6_22_1)
+ @echo "LINUX_HEADERS_VERSION" $(LINUX_HEADERS_VERSION)
+ @echo "BR2_PACKAGE_LINUX" $(BR2_PACKAGE_LINUX)
+ @echo "BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION" $(BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION)
+ @echo "BR2_CUSTOM_LINUX26_VERSION" $(BR2_CUSTOM_LINUX26_VERSION)
+ @echo "BR2_CUSTOM_LINUX26_RC_PATCH" $(BR2_CUSTOM_LINUX26_RC_PATCH)
+ @echo "BR2_LINUX_BSP_PATCH" $(BR2_LINUX_BSP_PATCH)
+ @echo "BR2_DOWNLOAD_LINUX26_VERSION" $(BR2_DOWNLOAD_LINUX26_VERSION)
+ @echo "BR2_LINUX26_VERSION" $(BR2_LINUX26_VERSION)
+ @echo "LINUX26_VERSION" $(LINUX26_VERSION)
+ @echo "BR2_LINUX26_RC_PATCH" $(BR2_LINUX26_RC_PATCH)
+ @echo "BR2_PACKAGE_LINUX26_KCONFIG" $(BR2_PACKAGE_LINUX_KCONFIG)
+ @echo "LINUX26_KCONFIG" $(LINUX26_KCONFIG)
+ @echo "BR2_LINUX_BIN_CUSTOM" $(BR2_LINUX_BIN_CUSTOM)
+ @echo "BR2_PACKAGE_LINUX_FORMAT" $(BR2_PACKAGE_LINUX_FORMAT)
+ @echo "BR2_LINUX_IN_ROOTFS" $(BR2_LINUX_IN_ROOTFS)
+ @echo "BR2_LINUX_2_6_22_1" $(BR2_LINUX_2_6_22_1)
diff --git a/target/linux/Makefile.in b/target/linux/Makefile.in
index 302852136..e83bfd53c 100644
--- a/target/linux/Makefile.in
+++ b/target/linux/Makefile.in
@@ -83,7 +83,7 @@ $(LINUX26_KCONFIG):
echo "and install it as $(LINUX26_KCONFIG)"; \
echo ""; \
sleep 5; \
- fi;
+ fi
ifneq ($(strip $(LINUX26_VERSION)),$(strip $(LINUX_HEADERS_VERSION)))
$(DL_DIR)/$(LINUX26_SOURCE):