diff options
Diffstat (limited to 'target')
-rw-r--r-- | target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-005-at91sam9g20ek.patch | 153 |
1 files changed, 76 insertions, 77 deletions
diff --git a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-005-at91sam9g20ek.patch b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-005-at91sam9g20ek.patch index bb7e6b116..b87a655e6 100644 --- a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-005-at91sam9g20ek.patch +++ b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-005-at91sam9g20ek.patch @@ -10,13 +10,13 @@ diff -urN u-boot-2008.10-0rig/Makefile u-boot-2008.10/Makefile +at91sam9g20ek_dataflash_cs1_config \ +at91sam9g20ek_config : unconfig + @if [ "$(findstring _nandflash,$@)" ] ; then \ -+ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ echo "#define CONFIG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in NAND FLASH" ; \ + elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ -+ echo "#define CFG_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ ++ echo "#define CONFIG_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ + else \ -+ echo "#define CFG_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ ++ echo "#define CONFIG_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ + fi; + @$(MKCONFIG) -a at91sam9g20ek arm arm926ejs at91sam9g20ek atmel at91 @@ -61,7 +61,7 @@ Index: include/configs/at91sam9g20ek.h +/* ARM asynchronous clock */ +#define AT91_MAIN_CLOCK 396288000 /* from 18.432 MHz crystal */ +#define AT91_MASTER_CLOCK 132096000 /* peripheral = main / 3 */ -+#define CFG_HZ 1000000 /* 1us resolution */ ++#define CONFIG_SYS_HZ 1000000 /* 1us resolution */ + +#define AT91_SLOW_CLOCK 32768 /* slow clock */ + @@ -109,7 +109,7 @@ Index: include/configs/at91sam9g20ek.h + +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_DHCP 1 -+#define CONFIG_CMD_NAND 1 ++#define CONFIG_CMD_NAND +#define CONFIG_CMD_USB 1 + +/* SDRAM */ @@ -119,22 +119,22 @@ Index: include/configs/at91sam9g20ek.h + +/* DataFlash */ +#define CONFIG_HAS_DATAFLASH 1 -+#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) -+#define CFG_MAX_DATAFLASH_BANKS 2 -+#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -+#define CFG_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ ++#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) ++#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 ++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ ++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ +#define AT91_SPI_CLK 15000000 +#define DATAFLASH_TCSS (0x22 << 16) +#define DATAFLASH_TCHS (0x1 << 24) -+ ++#define AT91SAM9260_BASE_SPI0 0xfffc8000 +/* NAND flash */ +#define NAND_MAX_CHIPS 1 -+#define CFG_MAX_NAND_DEVICE 1 -+#define CFG_NAND_BASE 0x40000000 -+#define CFG_NAND_DBW_8 1 ++#define CONFIG_SYS_MAX_NAND_DEVICE 1 ++#define CONFIG_SYS_NAND_BASE 0x40000000 ++#define CONFIG_SYS_NAND_DBW_8 1 + +/* NOR flash - no real flash on this board */ -+#define CFG_NO_FLASH 1 ++#define CONFIG_SYS_NO_FLASH 1 + +/* Ethernet */ +#define CONFIG_MACB 1 @@ -142,57 +142,57 @@ Index: include/configs/at91sam9g20ek.h +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R 1 -+ ++#define AT91SAM9260_BASE_EMAC 0xfffc4000 +/* USB */ +#define CONFIG_USB_OHCI_NEW 1 +#define LITTLEENDIAN 1 +#define CONFIG_DOS_PARTITION 1 -+#define CFG_USB_OHCI_CPU_INIT 1 -+#define CFG_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9G20_UHP_BASE */ -+#define CFG_USB_OHCI_SLOT_NAME "at91sam9g20" -+#define CFG_USB_OHCI_MAX_ROOT_PORTS 2 ++#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 ++#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9G20_UHP_BASE */ ++#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g20" ++#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE 1 + -+#define CFG_LOAD_ADDR 0x22000000 /* load address */ ++#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + -+#define CFG_MEMTEST_START PHYS_SDRAM -+#define CFG_MEMTEST_END 0x23e00000 ++#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM ++#define CONFIG_SYS_MEMTEST_END 0x23e00000 + -+#ifdef CFG_USE_DATAFLASH_CS0 ++#ifdef CONFIG_USE_DATAFLASH_CS0 + +/* bootstrap + u-boot + env + linux in dataflash on CS0 */ -+#define CFG_ENV_IS_IN_DATAFLASH 1 -+#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) -+#define CFG_ENV_OFFSET 0x4200 -+#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) -+#define CFG_ENV_SIZE 0x4200 ++#define CONFIG_ENV_IS_IN_DATAFLASH 1 ++#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) ++#define CONFIG_ENV_OFFSET 0x4200 ++#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) ++#define CONFIG_ENV_SIZE 0x4200 +#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock0 " \ + "mtdparts=at91_nand:-(root) " \ + "rw rootfstype=jffs2" + -+#elif CFG_USE_DATAFLASH_CS1 ++#elif CONFIG_USE_DATAFLASH_CS1 + +/* bootstrap + u-boot + env + linux in dataflash on CS1 */ -+#define CFG_ENV_IS_IN_DATAFLASH 1 -+#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) -+#define CFG_ENV_OFFSET 0x4200 -+#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS1 + CFG_ENV_OFFSET) -+#define CFG_ENV_SIZE 0x4200 ++#define CONFIG_ENV_IS_IN_DATAFLASH 1 ++#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) ++#define CONFIG_ENV_OFFSET 0x4200 ++#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET) ++#define CONFIG_ENV_SIZE 0x4200 +#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock0 " \ + "mtdparts=at91_nand:-(root) " \ + "rw rootfstype=jffs2" + -+#else /* CFG_USE_NANDFLASH */ ++#else /* CONFIG_USE_NANDFLASH */ + +/* bootstrap + u-boot + env + linux in nandflash */ -+#define CFG_ENV_IS_IN_NAND 1 -+#define CFG_ENV_OFFSET 0x60000 -+#define CFG_ENV_OFFSET_REDUND 0x80000 -+#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ ++#define CONFIG_ENV_IS_IN_NAND 1 ++#define CONFIG_ENV_OFFSET 0x60000 ++#define CONFIG_ENV_OFFSET_REDUND 0x80000 ++#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock5 " \ @@ -204,21 +204,21 @@ Index: include/configs/at91sam9g20ek.h +#endif + +#define CONFIG_BAUDRATE 115200 -+#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } ++#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + -+#define CFG_PROMPT "U-Boot> " -+#define CFG_CBSIZE 256 -+#define CFG_MAXARGS 16 -+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) -+#define CFG_LONGHELP 1 ++#define CONFIG_SYS_PROMPT "U-Boot> " ++#define CONFIG_SYS_CBSIZE 256 ++#define CONFIG_SYS_MAXARGS 16 ++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) ++#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 + +#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) +/* + * Size of malloc() pool + */ -+#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000) -+#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ ++#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) ++#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + @@ -231,7 +231,7 @@ Index: board/atmel/at91sam9g20ek/nand.c =================================================================== --- a/board/atmel/at91sam9g20ek/nand.c (.../u-boot-1.3.4) (revision 0) +++ b/board/atmel/at91sam9g20ek/nand.c (.../u-boot-1.3.4-exp) (revision 8417) -@@ -0,0 +1,79 @@ +@@ -0,0 +1,78 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> @@ -271,27 +271,26 @@ Index: board/atmel/at91sam9g20ek/nand.c +#define MASK_ALE (1 << 21) /* our ALE is AD21 */ +#define MASK_CLE (1 << 22) /* our CLE is AD22 */ + -+static void at91sam9g20ek_nand_hwcontrol(struct mtd_info *mtd, int cmd) ++static void at91sam9g20ek_nand_hwcontrol(struct mtd_info *mtd, ++ int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; -+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; -+ -+ IO_ADDR_W &= ~(MASK_ALE|MASK_CLE); -+ switch (cmd) { -+ case NAND_CTL_SETCLE: -+ IO_ADDR_W |= MASK_CLE; -+ break; -+ case NAND_CTL_SETALE: -+ IO_ADDR_W |= MASK_ALE; -+ break; -+ case NAND_CTL_CLRNCE: -+ at91_set_gpio_value(AT91_PIN_PC14, 1); -+ break; -+ case NAND_CTL_SETNCE: -+ at91_set_gpio_value(AT91_PIN_PC14, 0); -+ break; ++ ++ if (ctrl & NAND_CTRL_CHANGE) { ++ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; ++ IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); ++ ++ if (ctrl & NAND_CLE) ++ IO_ADDR_W |= MASK_CLE; ++ if (ctrl & NAND_ALE) ++ IO_ADDR_W |= MASK_ALE; ++ ++ at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE)); ++ this->IO_ADDR_W = (void *) IO_ADDR_W; + } -+ this->IO_ADDR_W = (void *) IO_ADDR_W; ++ ++ if (cmd != NAND_CMD_NONE) ++ writeb(cmd, this->IO_ADDR_W); +} + +static int at91sam9g20ek_nand_ready(struct mtd_info *mtd) @@ -301,11 +300,11 @@ Index: board/atmel/at91sam9g20ek/nand.c + +int board_nand_init(struct nand_chip *nand) +{ -+ nand->eccmode = NAND_ECC_SOFT; -+#ifdef CFG_NAND_DBW_16 ++ nand->ecc.mode = NAND_ECC_SOFT; ++#ifdef CONFIG_SYS_NAND_DBW_16 + nand->options = NAND_BUSWIDTH_16; +#endif -+ nand->hwcontrol = at91sam9g20ek_nand_hwcontrol; ++ nand->cmd_ctrl = at91sam9g20ek_nand_hwcontrol; + nand->dev_ready = at91sam9g20ek_nand_ready; + nand->chip_delay = 20; + @@ -351,7 +350,7 @@ Index: board/atmel/at91sam9g20ek/at91sam9g20ek.c +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) +#include <net.h> +#endif -+ ++#include <netdev.h> +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ @@ -408,9 +407,9 @@ Index: board/atmel/at91sam9g20ek/at91sam9g20ek.c + at91_sys_write(AT91_SMC_MODE(3), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | -+#ifdef CFG_NAND_DBW_16 ++#ifdef CONFIG_SYS_NAND_DBW_16 + AT91_SMC_DBW_16 | -+#else /* CFG_NAND_DBW_8 */ ++#else /* CONFIG_SYS_NAND_DBW_8 */ + AT91_SMC_DBW_8 | +#endif + AT91_SMC_TDF_(3)); @@ -665,11 +664,11 @@ Index: board/atmel/at91sam9g20ek/partition.c +#include <asm/hardware.h> +#include <dataflash.h> + -+AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; ++AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS]; + -+struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = { -+ {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ -+ {CFG_DATAFLASH_LOGIC_ADDR_CS1, 1} ++struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = { ++ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ ++ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1} +}; + +/*define the area offsets*/ @@ -795,7 +794,7 @@ diff -urN u-boot-2008.10-0rig/board/atmel/at91sam9g20ek/at91sam9g20ek.c u-boot-2 +{ + int rc = 0; +#ifdef CONFIG_MACB -+ rc = macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); ++ rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00); +#endif + return rc; +} |