summaryrefslogtreecommitdiff
path: root/toolchain/kernel-headers/linux-2.6.21.5-003-atmel.1-avr32-updates.patch
diff options
context:
space:
mode:
Diffstat (limited to 'toolchain/kernel-headers/linux-2.6.21.5-003-atmel.1-avr32-updates.patch')
-rw-r--r--toolchain/kernel-headers/linux-2.6.21.5-003-atmel.1-avr32-updates.patch17772
1 files changed, 17772 insertions, 0 deletions
diff --git a/toolchain/kernel-headers/linux-2.6.21.5-003-atmel.1-avr32-updates.patch b/toolchain/kernel-headers/linux-2.6.21.5-003-atmel.1-avr32-updates.patch
new file mode 100644
index 000000000..a07c9f3f9
--- /dev/null
+++ b/toolchain/kernel-headers/linux-2.6.21.5-003-atmel.1-avr32-updates.patch
@@ -0,0 +1,17772 @@
+diff --git a/MAINTAINERS b/MAINTAINERS
+index 277877a..a5bdfa6 100644
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -1434,6 +1434,11 @@ L: linux-scsi@vger.kernel.org
+ W: http://www.icp-vortex.com/
+ S: Supported
+
++GENERIC GPIO I2C DRIVER
++P: Haavard Skinnemoen
++M: hskinnemoen@atmel.com
++S: Supported
++
+ GENERIC HDLC DRIVER, N2, C101, PCI200SYN and WANXL DRIVERS
+ P: Krzysztof Halasa
+ M: khc@pm.waw.pl
+diff --git a/Makefile b/Makefile
+index 7980f39..388b666 100644
+--- a/Makefile
++++ b/Makefile
+@@ -1,7 +1,7 @@
+ VERSION = 2
+ PATCHLEVEL = 6
+ SUBLEVEL = 21
+-EXTRAVERSION = .3
++EXTRAVERSION = .3.atmel.1
+ NAME = Nocturnal Monster Puppy
+
+ # *DOCUMENTATION*
+diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
+index ce4013a..3956118 100644
+--- a/arch/avr32/Kconfig
++++ b/arch/avr32/Kconfig
+@@ -57,9 +57,6 @@ config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
+-config GENERIC_BUST_SPINLOCK
+- bool
+-
+ config GENERIC_HWEIGHT
+ bool
+ default y
+@@ -68,6 +65,11 @@ config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
++config GENERIC_BUG
++ bool
++ default y
++ depends on BUG
++
+ source "init/Kconfig"
+
+ menu "System Type and features"
+@@ -106,6 +108,9 @@ choice
+ config BOARD_ATSTK1000
+ bool "ATSTK1000 evaluation board"
+ select BOARD_ATSTK1002 if CPU_AT32AP7000
++
++config BOARD_ATNGW100
++ bool "ATNGW100 Network Gateway"
+ endchoice
+
+ choice
+@@ -116,6 +121,8 @@ config LOADER_U_BOOT
+ bool "U-Boot (or similar) bootloader"
+ endchoice
+
++source "arch/avr32/mach-at32ap/Kconfig"
++
+ config LOAD_ADDRESS
+ hex
+ default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
+@@ -164,6 +171,10 @@ config OWNERSHIP_TRACE
+ enabling Nexus-compliant debuggers to keep track of the PID of the
+ currently executing task.
+
++config DW_DMAC
++ tristate "Synopsys DesignWare DMA Controller support"
++ default y if CPU_AT32AP7000
++
+ # FPU emulation goes here
+
+ source "kernel/Kconfig.hz"
+diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
+index 7b842e9..eb72198 100644
+--- a/arch/avr32/Makefile
++++ b/arch/avr32/Makefile
+@@ -16,7 +16,7 @@ AFLAGS += -mrelax -mno-pic
+ CFLAGS_MODULE += -mno-relax
+ LDFLAGS_vmlinux += --relax
+
+-cpuflags-$(CONFIG_CPU_AP7000) += -mcpu=ap7000
++cpuflags-$(CONFIG_CPU_AT32AP7000) += -mcpu=ap7000
+
+ CFLAGS += $(cpuflags-y)
+ AFLAGS += $(cpuflags-y)
+@@ -27,9 +27,11 @@ head-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/head.o
+ head-y += arch/avr32/kernel/head.o
+ core-$(CONFIG_PLATFORM_AT32AP) += arch/avr32/mach-at32ap/
+ core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/
++core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/
+ core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/
+ core-y += arch/avr32/kernel/
+ core-y += arch/avr32/mm/
++drivers-y += arch/avr32/drivers/
+ libs-y += arch/avr32/lib/
+
+ archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
+diff --git a/arch/avr32/boards/atngw100/Makefile b/arch/avr32/boards/atngw100/Makefile
+new file mode 100644
+index 0000000..c740aa1
+--- /dev/null
++++ b/arch/avr32/boards/atngw100/Makefile
+@@ -0,0 +1 @@
++obj-y += setup.o flash.o
+diff --git a/arch/avr32/boards/atngw100/flash.c b/arch/avr32/boards/atngw100/flash.c
+new file mode 100644
+index 0000000..f9b32a8
+--- /dev/null
++++ b/arch/avr32/boards/atngw100/flash.c
+@@ -0,0 +1,95 @@
++/*
++ * ATNGW100 board-specific flash initialization
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++
++#include <asm/arch/smc.h>
++
++static struct smc_config flash_config __initdata = {
++ .ncs_read_setup = 0,
++ .nrd_setup = 40,
++ .ncs_write_setup = 0,
++ .nwe_setup = 10,
++
++ .ncs_read_pulse = 80,
++ .nrd_pulse = 40,
++ .ncs_write_pulse = 65,
++ .nwe_pulse = 55,
++
++ .read_cycle = 120,
++ .write_cycle = 120,
++
++ .bus_width = 2,
++ .nrd_controlled = 1,
++ .nwe_controlled = 1,
++ .byte_write = 1,
++};
++
++static struct mtd_partition flash_parts[] = {
++ {
++ .name = "u-boot",
++ .offset = 0x00000000,
++ .size = 0x00020000, /* 128 KiB */
++ .mask_flags = MTD_WRITEABLE,
++ },
++ {
++ .name = "root",
++ .offset = 0x00020000,
++ .size = 0x007d0000,
++ },
++ {
++ .name = "env",
++ .offset = 0x007f0000,
++ .size = 0x00010000,
++ .mask_flags = MTD_WRITEABLE,
++ },
++};
++
++static struct physmap_flash_data flash_data = {
++ .width = 2,
++ .nr_parts = ARRAY_SIZE(flash_parts),
++ .parts = flash_parts,
++};
++
++static struct resource flash_resource = {
++ .start = 0x00000000,
++ .end = 0x007fffff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device flash_device = {
++ .name = "physmap-flash",
++ .id = 0,
++ .resource = &flash_resource,
++ .num_resources = 1,
++ .dev = {
++ .platform_data = &flash_data,
++ },
++};
++
++/* This needs to be called after the SMC has been initialized */
++static int __init atngw100_flash_init(void)
++{
++ int ret;
++
++ ret = smc_set_configuration(0, &flash_config);
++ if (ret < 0) {
++ printk(KERN_ERR "atngw100: failed to set NOR flash timing\n");
++ return ret;
++ }
++
++ platform_device_register(&flash_device);
++
++ return 0;
++}
++device_initcall(atngw100_flash_init);
+diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
+new file mode 100644
+index 0000000..3cbdc2d
+--- /dev/null
++++ b/arch/avr32/boards/atngw100/setup.c
+@@ -0,0 +1,131 @@
++/*
++ * Board-specific setup code for the ATNGW100 Network Gateway
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/etherdevice.h>
++#include <linux/init.h>
++#include <linux/linkage.h>
++#include <linux/platform_device.h>
++#include <linux/types.h>
++#include <linux/spi/spi.h>
++
++#include <asm/io.h>
++#include <asm/setup.h>
++
++#include <asm/arch/at32ap7000.h>
++#include <asm/arch/board.h>
++#include <asm/arch/init.h>
++
++/* Initialized by bootloader-specific startup code. */
++struct tag *bootloader_tags __initdata;
++
++struct eth_addr {
++ u8 addr[6];
++};
++static struct eth_addr __initdata hw_addr[2];
++static struct eth_platform_data __initdata eth_data[2];
++
++static struct spi_board_info spi0_board_info[] __initdata = {
++ {
++ .modalias = "mtd_dataflash",
++ .max_speed_hz = 10000000,
++ .chip_select = 0,
++ },
++};
++
++static struct mci_platform_data __initdata mci0_data = {
++ .detect_pin = GPIO_PIN_PC(25),
++ .wp_pin = GPIO_PIN_PE(0),
++};
++
++/*
++ * The next two functions should go away as the boot loader is
++ * supposed to initialize the macb address registers with a valid
++ * ethernet address. But we need to keep it around for a while until
++ * we can be reasonably sure the boot loader does this.
++ *
++ * The phy_id is ignored as the driver will probe for it.
++ */
++static int __init parse_tag_ethernet(struct tag *tag)
++{
++ int i;
++
++ i = tag->u.ethernet.mac_index;
++ if (i < ARRAY_SIZE(hw_addr))
++ memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
++ sizeof(hw_addr[i].addr));
++
++ return 0;
++}
++__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
++
++static void __init set_hw_addr(struct platform_device *pdev)
++{
++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ const u8 *addr;
++ void __iomem *regs;
++ struct clk *pclk;
++
++ if (!res)
++ return;
++ if (pdev->id >= ARRAY_SIZE(hw_addr))
++ return;
++
++ addr = hw_addr[pdev->id].addr;
++ if (!is_valid_ether_addr(addr))
++ return;
++
++ /*
++ * Since this is board-specific code, we'll cheat and use the
++ * physical address directly as we happen to know that it's
++ * the same as the virtual address.
++ */
++ regs = (void __iomem __force *)res->start;
++ pclk = clk_get(&pdev->dev, "pclk");
++ if (!pclk)
++ return;
++
++ clk_enable(pclk);
++ __raw_writel((addr[3] << 24) | (addr[2] << 16)
++ | (addr[1] << 8) | addr[0], regs + 0x98);
++ __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
++ clk_disable(pclk);
++ clk_put(pclk);
++}
++
++struct platform_device *at32_usart_map[1];
++unsigned int at32_nr_usarts = 1;
++
++void __init setup_board(void)
++{
++ at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */
++ at32_setup_serial_console(0);
++}
++
++static int __init atngw100_init(void)
++{
++ /*
++ * ATNGW100 uses 16-bit SDRAM interface, so we don't need to
++ * reserve any pins for it.
++ */
++
++ at32_add_system_devices();
++
++ at32_add_device_usart(0);
++
++ set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
++ set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
++
++ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++ at32_add_device_mci(0, &mci0_data);
++ at32_add_device_usba(0);
++
++ return 0;
++}
++postcore_initcall(atngw100_init);
+diff --git a/arch/avr32/boards/atstk1000/atstk1000.h b/arch/avr32/boards/atstk1000/atstk1000.h
+new file mode 100644
+index 0000000..9a49ed0
+--- /dev/null
++++ b/arch/avr32/boards/atstk1000/atstk1000.h
+@@ -0,0 +1,15 @@
++/*
++ * ATSTK1000 setup code: Daughterboard interface
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
++#define __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
++
++extern struct atmel_lcdfb_info atstk1000_lcdc_data;
++
++#endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */
+diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
+index 5974768..84c22b2 100644
+--- a/arch/avr32/boards/atstk1000/atstk1002.c
++++ b/arch/avr32/boards/atstk1000/atstk1002.c
+@@ -14,7 +14,12 @@
+ #include <linux/platform_device.h>
+ #include <linux/string.h>
+ #include <linux/types.h>
++
+ #include <linux/spi/spi.h>
++#include <linux/spi/at73c213.h>
++#include <linux/gpio_mouse.h>
++
++#include <video/atmel_lcdc.h>
+
+ #include <asm/io.h>
+ #include <asm/setup.h>
+@@ -23,6 +28,7 @@
+ #include <asm/arch/init.h>
+ #include <asm/arch/portmux.h>
+
++#include "atstk1000.h"
+
+ #define SW2_DEFAULT /* MMCI and UART_A available */
+
+@@ -31,19 +37,82 @@ struct eth_addr {
+ };
+
+ static struct eth_addr __initdata hw_addr[2];
+-
+ static struct eth_platform_data __initdata eth_data[2];
+-extern struct lcdc_platform_data atstk1000_fb0_data;
++
++static struct at73c213_board_info at73c213_data = {
++ .dac_clk = "gclk0",
++ .i2s_dev = 0,
++ .shortname = "AVR32 STK1000 external DAC",
++};
++
++static struct cf_platform_data __initdata cf0_data = {
++ .detect_pin = GPIO_PIN_PB(15),
++ .reset_pin = GPIO_PIN_PB(30),
++};
+
+ static struct spi_board_info spi0_board_info[] __initdata = {
+ {
++ /* AT73C213 */
++ .modalias = "at73c213",
++ .max_speed_hz = 200000,
++ .chip_select = 0,
++ .mode = SPI_MODE_1,
++ .platform_data = &at73c213_data,
++ },
++ {
+ /* QVGA display */
+ .modalias = "ltv350qv",
+ .max_speed_hz = 16000000,
+ .chip_select = 1,
++ .mode = SPI_MODE_3,
+ },
+ };
+
++static struct mci_platform_data __initdata mci0_data = {
++ .detect_pin = GPIO_PIN_NONE,
++ .wp_pin = GPIO_PIN_NONE,
++};
++
++/* The next two structs and functions are for adding gpio_mouse
++ * support to the board
++ */
++static struct gpio_mouse_platform_data gpio_mouse0_data = {
++ .polarity = GPIO_MOUSE_POLARITY_ACT_LOW,
++ .up = GPIO_PIN_PB(2),
++ .down = GPIO_PIN_PB(1),
++ .left = GPIO_PIN_PB(3),
++ .right = GPIO_PIN_PB(0),
++ .bleft = GPIO_PIN_PB(7),
++ .bmiddle = GPIO_PIN_PB(6),
++ .bright = GPIO_PIN_PB(5),
++ .scan_ms = 10,
++};
++
++static struct platform_device gpio_mouse0_device = {
++ .name = "gpio_mouse",
++ .id = 0,
++ .dev = {
++ .platform_data = &gpio_mouse0_data,
++ },
++};
++
++static void __init add_device_gpio_mouse0(void)
++{
++ struct platform_device *pdev = &gpio_mouse0_device;
++ struct gpio_mouse_platform_data *data = pdev->dev.platform_data;
++
++ at32_select_gpio(data->up, 0);
++ at32_select_gpio(data->down, 0);
++ at32_select_gpio(data->left, 0);
++ at32_select_gpio(data->right, 0);
++
++ at32_select_gpio(data->bleft, 0);
++ at32_select_gpio(data->bmiddle, 0);
++ at32_select_gpio(data->bright, 0);
++
++ platform_device_register(pdev);
++}
++
+ /*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+@@ -99,6 +168,29 @@ static void __init set_hw_addr(struct platform_device *pdev)
+ clk_put(pclk);
+ }
+
++static void __init set_at73c213_init_gclk(struct at73c213_board_info *info)
++{
++ struct clk *gclk = clk_get(NULL, info->dac_clk);
++ struct clk *pll = clk_get(NULL, "pll0");
++
++ if (!IS_ERR(gclk) && !IS_ERR(pll)) {
++ if(clk_set_parent(gclk, pll) != 0)
++ goto cleanup;
++ } else {
++ goto cleanup;
++ }
++
++ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++ return;
++
++cleanup:
++ if(!IS_ERR(gclk))
++ clk_put(gclk);
++ if(!IS_ERR(pll))
++ clk_put(pll);
++ return;
++}
++
+ void __init setup_board(void)
+ {
+ #ifdef SW2_DEFAULT
+@@ -148,7 +240,18 @@ static int __init atstk1002_init(void)
+ set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+
+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+- at32_add_device_lcdc(0, &atstk1000_fb0_data);
++ at32_add_device_twi(0);
++ at32_add_device_mci(0, &mci0_data);
++ at32_add_device_lcdc(0, &atstk1000_lcdc_data,
++ fbmem_start, fbmem_size);
++ at32_add_device_usba(0);
++ at32_add_device_ssc(0, ATMEL_SSC_TX);
++ at32_add_device_abdac(0);
++ at32_add_device_cf(0, 3, &cf0_data);
++
++ set_at73c213_init_gclk(&at73c213_data);
++
++ add_device_gpio_mouse0();
+
+ return 0;
+ }
+diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
+index 272c011..c9af409 100644
+--- a/arch/avr32/boards/atstk1000/setup.c
++++ b/arch/avr32/boards/atstk1000/setup.c
+@@ -8,43 +8,56 @@
+ * published by the Free Software Foundation.
+ */
+ #include <linux/bootmem.h>
++#include <linux/fb.h>
+ #include <linux/init.h>
+ #include <linux/types.h>
+ #include <linux/linkage.h>
+
+-#include <asm/setup.h>
++#include <video/atmel_lcdc.h>
+
++#include <asm/setup.h>
+ #include <asm/arch/board.h>
+
++#include "atstk1000.h"
++
+ /* Initialized by bootloader-specific startup code. */
+ struct tag *bootloader_tags __initdata;
+
+-struct lcdc_platform_data __initdata atstk1000_fb0_data;
+-
+-void __init board_setup_fbmem(unsigned long fbmem_start,
+- unsigned long fbmem_size)
+-{
+- if (!fbmem_size)
+- return;
+-
+- if (!fbmem_start) {
+- void *fbmem;
+-
+- fbmem = alloc_bootmem_low_pages(fbmem_size);
+- fbmem_start = __pa(fbmem);
+- } else {
+- pg_data_t *pgdat;
+-
+- for_each_online_pgdat(pgdat) {
+- if (fbmem_start >= pgdat->bdata->node_boot_start
+- && fbmem_start <= pgdat->bdata->node_low_pfn)
+- reserve_bootmem_node(pgdat, fbmem_start,
+- fbmem_size);
+- }
+- }
+-
+- printk("%luKiB framebuffer memory at address 0x%08lx\n",
+- fbmem_size >> 10, fbmem_start);
+- atstk1000_fb0_data.fbmem_start = fbmem_start;
+- atstk1000_fb0_data.fbmem_size = fbmem_size;
+-}
++static struct fb_videomode __initdata ltv350qv_modes[] = {
++ {
++ .name = "320x240 @ 75",
++ .refresh = 75,
++ .xres = 320, .yres = 240,
++ .pixclock = KHZ2PICOS(6891),
++
++ .left_margin = 17, .right_margin = 33,
++ .upper_margin = 10, .lower_margin = 10,
++ .hsync_len = 16, .vsync_len = 1,
++
++ .sync = 0,
++ .vmode = FB_VMODE_NONINTERLACED,
++ },
++};
++
++static struct fb_monspecs __initdata atstk1000_default_monspecs = {
++ .manufacturer = "SNG",
++ .monitor = "LTV350QV",
++ .modedb = ltv350qv_modes,
++ .modedb_len = ARRAY_SIZE(ltv350qv_modes),
++ .hfmin = 14820,
++ .hfmax = 22230,
++ .vfmin = 60,
++ .vfmax = 90,
++ .dclkmax = 30000000,
++};
++
++struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = {
++ .default_bpp = 24,
++ .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
++ .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
++ | ATMEL_LCDC_INVCLK
++ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
++ | ATMEL_LCDC_MEMOR_BIG),
++ .default_monspecs = &atstk1000_default_monspecs,
++ .guard_time = 2,
++};
+diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
+new file mode 100644
+index 0000000..c254ffc
+--- /dev/null
++++ b/arch/avr32/configs/atngw100_defconfig
+@@ -0,0 +1,1085 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.21-rc6
++# Thu Apr 12 16:35:07 2007
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# Code maturity level options
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++
++#
++# General setup
++#
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++# CONFIG_IPC_NS is not set
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++# CONFIG_TASKSTATS is not set
++# CONFIG_UTS_NS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_BASE_FULL is not set
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SHMEM=y
++CONFIG_SLAB=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++# CONFIG_SLOB is not set
++
++#
++# Loadable module support
++#
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++
++#
++# Block layer
++#
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_AS is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++
++#
++# System Type and features
++#
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP7000=y
++# CONFIG_BOARD_ATSTK1000 is not set
++CONFIG_BOARD_ATNGW100=y
++CONFIG_LOADER_U_BOOT=y
++
++#
++# Atmel AVR32 AP options
++#
++# CONFIG_AP7000_32_BIT_SMC is not set
++CONFIG_AP7000_16_BIT_SMC=y
++# CONFIG_AP7000_8_BIT_SMC is not set
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++# CONFIG_OWNERSHIP_TRACE is not set
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_CMDLINE=""
++
++#
++# Bus options
++#
++
++#
++# PCCARD (PCMCIA/CardBus) support
++#
++# CONFIG_PCCARD is not set
++
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++# CONFIG_NETDEBUG is not set
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=y
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++CONFIG_NET_KEY=y
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_ASK_IP_FIB_HASH=y
++# CONFIG_IP_FIB_TRIE is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_MULTIPLE_TABLES is not set
++# CONFIG_IP_ROUTE_MULTIPATH is not set
++# CONFIG_IP_ROUTE_VERBOSE is not set
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++CONFIG_IP_MROUTE=y
++CONFIG_IP_PIMSM_V1=y
++# CONFIG_IP_PIMSM_V2 is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++CONFIG_INET_AH=y
++CONFIG_INET_ESP=y
++CONFIG_INET_IPCOMP=y
++CONFIG_INET_XFRM_TUNNEL=y
++CONFIG_INET_TUNNEL=y
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++
++#
++# IP: Virtual Server Configuration
++#
++# CONFIG_IP_VS is not set
++CONFIG_IPV6=y
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++CONFIG_INET6_AH=y
++CONFIG_INET6_ESP=y
++CONFIG_INET6_IPCOMP=y
++# CONFIG_IPV6_MIP6 is not set
++CONFIG_INET6_XFRM_TUNNEL=y
++CONFIG_INET6_TUNNEL=y
++CONFIG_INET6_XFRM_MODE_TRANSPORT=y
++CONFIG_INET6_XFRM_MODE_TUNNEL=y
++CONFIG_INET6_XFRM_MODE_BEET=y
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=y
++# CONFIG_IPV6_TUNNEL is not set
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
++# CONFIG_NETWORK_SECMARK is not set
++CONFIG_NETFILTER=y
++# CONFIG_NETFILTER_DEBUG is not set
++
++#
++# Core Netfilter Configuration
++#
++# CONFIG_NETFILTER_NETLINK is not set
++CONFIG_NF_CONNTRACK_ENABLED=m
++CONFIG_NF_CONNTRACK_SUPPORT=y
++# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
++CONFIG_NF_CONNTRACK=m
++CONFIG_NF_CT_ACCT=y
++CONFIG_NF_CONNTRACK_MARK=y
++# CONFIG_NF_CONNTRACK_EVENTS is not set
++CONFIG_NF_CT_PROTO_GRE=m
++# CONFIG_NF_CT_PROTO_SCTP is not set
++CONFIG_NF_CONNTRACK_AMANDA=m
++CONFIG_NF_CONNTRACK_FTP=m
++CONFIG_NF_CONNTRACK_H323=m
++CONFIG_NF_CONNTRACK_IRC=m
++CONFIG_NF_CONNTRACK_NETBIOS_NS=m
++CONFIG_NF_CONNTRACK_PPTP=m
++CONFIG_NF_CONNTRACK_SANE=m
++CONFIG_NF_CONNTRACK_SIP=m
++CONFIG_NF_CONNTRACK_TFTP=m
++CONFIG_NETFILTER_XTABLES=y
++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
++# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
++# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
++CONFIG_NETFILTER_XT_TARGET_MARK=m
++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
++CONFIG_NETFILTER_XT_TARGET_NFLOG=m
++# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
++CONFIG_NETFILTER_XT_MATCH_COMMENT=m
++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
++# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
++# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
++CONFIG_NETFILTER_XT_MATCH_ESP=m
++CONFIG_NETFILTER_XT_MATCH_HELPER=m
++CONFIG_NETFILTER_XT_MATCH_LENGTH=m
++CONFIG_NETFILTER_XT_MATCH_LIMIT=m
++CONFIG_NETFILTER_XT_MATCH_MAC=m
++CONFIG_NETFILTER_XT_MATCH_MARK=m
++CONFIG_NETFILTER_XT_MATCH_POLICY=m
++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
++CONFIG_NETFILTER_XT_MATCH_QUOTA=m
++CONFIG_NETFILTER_XT_MATCH_REALM=m
++# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
++CONFIG_NETFILTER_XT_MATCH_STATE=m
++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
++CONFIG_NETFILTER_XT_MATCH_STRING=m
++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
++
++#
++# IP: Netfilter Configuration
++#
++CONFIG_NF_CONNTRACK_IPV4=m
++CONFIG_NF_CONNTRACK_PROC_COMPAT=y
++# CONFIG_IP_NF_QUEUE is not set
++CONFIG_IP_NF_IPTABLES=m
++CONFIG_IP_NF_MATCH_IPRANGE=m
++CONFIG_IP_NF_MATCH_TOS=m
++CONFIG_IP_NF_MATCH_RECENT=m
++CONFIG_IP_NF_MATCH_ECN=m
++CONFIG_IP_NF_MATCH_AH=m
++CONFIG_IP_NF_MATCH_TTL=m
++CONFIG_IP_NF_MATCH_OWNER=m
++CONFIG_IP_NF_MATCH_ADDRTYPE=m
++CONFIG_IP_NF_FILTER=m
++CONFIG_IP_NF_TARGET_REJECT=m
++CONFIG_IP_NF_TARGET_LOG=m
++# CONFIG_IP_NF_TARGET_ULOG is not set
++CONFIG_NF_NAT=m
++CONFIG_NF_NAT_NEEDED=y
++CONFIG_IP_NF_TARGET_MASQUERADE=m
++CONFIG_IP_NF_TARGET_REDIRECT=m
++CONFIG_IP_NF_TARGET_NETMAP=m
++CONFIG_IP_NF_TARGET_SAME=m
++CONFIG_NF_NAT_SNMP_BASIC=m
++CONFIG_NF_NAT_PROTO_GRE=m
++CONFIG_NF_NAT_FTP=m
++CONFIG_NF_NAT_IRC=m
++CONFIG_NF_NAT_TFTP=m
++CONFIG_NF_NAT_AMANDA=m
++CONFIG_NF_NAT_PPTP=m
++CONFIG_NF_NAT_H323=m
++CONFIG_NF_NAT_SIP=m
++CONFIG_IP_NF_MANGLE=m
++CONFIG_IP_NF_TARGET_TOS=m
++CONFIG_IP_NF_TARGET_ECN=m
++CONFIG_IP_NF_TARGET_TTL=m
++CONFIG_IP_NF_TARGET_CLUSTERIP=m
++CONFIG_IP_NF_RAW=m
++CONFIG_IP_NF_ARPTABLES=m
++CONFIG_IP_NF_ARPFILTER=m
++CONFIG_IP_NF_ARP_MANGLE=m
++
++#
++# IPv6: Netfilter Configuration (EXPERIMENTAL)
++#
++CONFIG_NF_CONNTRACK_IPV6=m
++CONFIG_IP6_NF_QUEUE=m
++CONFIG_IP6_NF_IPTABLES=m
++CONFIG_IP6_NF_MATCH_RT=m
++CONFIG_IP6_NF_MATCH_OPTS=m
++CONFIG_IP6_NF_MATCH_FRAG=m
++CONFIG_IP6_NF_MATCH_HL=m
++CONFIG_IP6_NF_MATCH_OWNER=m
++CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++CONFIG_IP6_NF_MATCH_AH=m
++CONFIG_IP6_NF_MATCH_MH=m
++CONFIG_IP6_NF_MATCH_EUI64=m
++CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_TARGET_LOG=m
++CONFIG_IP6_NF_TARGET_REJECT=m
++CONFIG_IP6_NF_MANGLE=m
++CONFIG_IP6_NF_TARGET_HL=m
++CONFIG_IP6_NF_RAW=m
++
++#
++# DCCP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_DCCP is not set
++
++#
++# SCTP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_SCTP is not set
++
++#
++# TIPC Configuration (EXPERIMENTAL)
++#
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++CONFIG_VLAN_8021Q=m
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
++CONFIG_NET_CLS_ROUTE=y
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_IEEE80211 is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++
++#
++# Connector - unified userspace <-> kernelspace linker
++#
++# CONFIG_CONNECTOR is not set
++
++#
++# Memory Technology Devices (MTD)
++#
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++# CONFIG_MTD_OBSOLETE_CHIPS is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x80000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=y
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++
++#
++# NAND Flash Device Drivers
++#
++# CONFIG_MTD_NAND is not set
++
++#
++# OneNAND Flash Device Drivers
++#
++# CONFIG_MTD_ONENAND is not set
++
++#
++# Parallel port support
++#
++# CONFIG_PARPORT is not set
++
++#
++# Plug and Play support
++#
++# CONFIG_PNPACPI is not set
++
++#
++# Block devices
++#
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=m
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++
++#
++# Misc devices
++#
++
++#
++# ATA/ATAPI/MFM/RLL support
++#
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_NETLINK is not set
++
++#
++# Serial ATA (prod) and Parallel ATA (experimental) drivers
++#
++# CONFIG_ATA is not set
++
++#
++# Multi-device support (RAID and LVM)
++#
++# CONFIG_MD is not set
++
++#
++# Fusion MPT device support
++#
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++
++#
++# I2O device support
++#
++
++#
++# Network device support
++#
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_EQUALIZER is not set
++CONFIG_TUN=m
++
++#
++# PHY device support
++#
++# CONFIG_PHYLIB is not set
++
++#
++# Ethernet (10 or 100Mbit)
++#
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++CONFIG_MACB=y
++
++#
++# Ethernet (1000 Mbit)
++#
++
++#
++# Ethernet (10000 Mbit)
++#
++
++#
++# Token Ring devices
++#
++
++#
++# Wireless LAN (non-hamradio)
++#
++# CONFIG_NET_RADIO is not set
++
++#
++# Wan interfaces
++#
++# CONFIG_WAN is not set
++CONFIG_PPP=m
++# CONFIG_PPP_MULTILINK is not set
++CONFIG_PPP_FILTER=y
++CONFIG_PPP_ASYNC=m
++# CONFIG_PPP_SYNC_TTY is not set
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++CONFIG_PPP_MPPE=m
++CONFIG_PPPOE=m
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++
++#
++# ISDN subsystem
++#
++# CONFIG_ISDN is not set
++
++#
++# Telephony Support
++#
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++
++#
++# IPMI
++#
++# CONFIG_IPMI_HANDLER is not set
++
++#
++# Watchdog Cards
++#
++# CONFIG_WATCHDOG is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_RTC is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_DTLK is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++
++#
++# TPM devices
++#
++# CONFIG_TCG_TPM is not set
++
++#
++# I2C support
++#
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++
++#
++# Dallas's 1-wire bus
++#
++# CONFIG_W1 is not set
++
++#
++# Hardware Monitoring support
++#
++# CONFIG_HWMON is not set
++# CONFIG_HWMON_VID is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++
++#
++# Digital Video Broadcasting Devices
++#
++# CONFIG_DVB is not set
++
++#
++# Graphics support
++#
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++# CONFIG_FB is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++
++#
++# USB support
++#
++# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# USB Gadget Support
++#
++# CONFIG_USB_GADGET is not set
++
++#
++# MMC/SD Card support
++#
++# CONFIG_MMC is not set
++
++#
++# LED devices
++#
++# CONFIG_NEW_LEDS is not set
++
++#
++# LED drivers
++#
++
++#
++# LED Triggers
++#
++
++#
++# InfiniBand support
++#
++
++#
++# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
++#
++
++#
++# Real Time Clock
++#
++# CONFIG_RTC_CLASS is not set
++
++#
++# DMA Engine support
++#
++# CONFIG_DMA_ENGINE is not set
++
++#
++# DMA Clients
++#
++
++#
++# DMA Devices
++#
++
++#
++# Auxiliary Display support
++#
++
++#
++# Virtualization
++#
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_INOTIFY is not set
++# CONFIG_QUOTA is not set
++# CONFIG_DNOTIFY is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++CONFIG_FUSE_FS=m
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=850
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++# CONFIG_PROC_KCORE is not set
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
++CONFIG_CONFIGFS_FS=y
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++
++#
++# Network File Systems
++#
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++CONFIG_SMB_FS=m
++# CONFIG_SMB_NLS_DEFAULT is not set
++CONFIG_CIFS=m
++# CONFIG_CIFS_STATS is not set
++# CONFIG_CIFS_WEAK_PW_HASH is not set
++# CONFIG_CIFS_XATTR is not set
++# CONFIG_CIFS_DEBUG2 is not set
++# CONFIG_CIFS_EXPERIMENTAL is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++# CONFIG_9P_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++
++#
++# Native Language Support
++#
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++# CONFIG_NLS_CODEPAGE_437 is not set
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=y
++
++#
++# Distributed Lock Manager
++#
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++CONFIG_FRAME_POINTER=y
++# CONFIG_FORCED_INLINING is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_KPROBES is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++
++#
++# Cryptographic options
++#
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_HMAC=y
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=y
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=m
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++CONFIG_CRYPTO_ARC4=m
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++CONFIG_CRYPTO_DEFLATE=y
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Hardware crypto devices
++#
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_CRC_CCITT=m
++# CONFIG_CRC16 is not set
++CONFIG_CRC32=y
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_TEXTSEARCH=y
++CONFIG_TEXTSEARCH_KMP=m
++CONFIG_TEXTSEARCH_BM=m
++CONFIG_TEXTSEARCH_FSM=m
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
+diff --git a/arch/avr32/drivers/Makefile b/arch/avr32/drivers/Makefile
+new file mode 100644
+index 0000000..b429b75
+--- /dev/null
++++ b/arch/avr32/drivers/Makefile
+@@ -0,0 +1 @@
++obj-$(CONFIG_DW_DMAC) += dw-dmac.o
+diff --git a/arch/avr32/drivers/dw-dmac.c b/arch/avr32/drivers/dw-dmac.c
+new file mode 100644
+index 0000000..9c1d27a
+--- /dev/null
++++ b/arch/avr32/drivers/dw-dmac.c
+@@ -0,0 +1,761 @@
++/*
++ * Driver for the Synopsys DesignWare DMA Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++
++#include "dw-dmac.h"
++
++#define DMAC_NR_CHANNELS 3
++#define DMAC_MAX_BLOCKSIZE 4095
++
++enum {
++ CH_STATE_FREE = 0,
++ CH_STATE_ALLOCATED,
++ CH_STATE_BUSY,
++};
++
++struct dw_dma_lli {
++ dma_addr_t sar;
++ dma_addr_t dar;
++ dma_addr_t llp;
++ u32 ctllo;
++ u32 ctlhi;
++ u32 sstat;
++ u32 dstat;
++};
++
++struct dw_dma_block {
++ struct dw_dma_lli *lli_vaddr;
++ dma_addr_t lli_dma_addr;
++};
++
++struct dw_dma_channel {
++ unsigned int state;
++ int is_cyclic;
++ struct dma_request_sg *req_sg;
++ struct dma_request_cyclic *req_cyclic;
++ unsigned int nr_blocks;
++ int direction;
++ struct dw_dma_block *block;
++};
++
++struct dw_dma_controller {
++ spinlock_t lock;
++ void * __iomem regs;
++ struct dma_pool *lli_pool;
++ struct clk *hclk;
++ struct dma_controller dma;
++ struct dw_dma_channel channel[DMAC_NR_CHANNELS];
++};
++#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
++
++#define dmac_writel_hi(dmac, reg, value) \
++ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_readl_hi(dmac, reg) \
++ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_writel_lo(dmac, reg, value) \
++ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
++#define dmac_readl_lo(dmac, reg) \
++ __raw_readl((dmac)->regs + DW_DMAC_##reg)
++#define dmac_chan_writel_hi(dmac, chan, reg, value) \
++ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
++ + DW_DMAC_CHAN_##reg + 4))
++#define dmac_chan_readl_hi(dmac, chan, reg) \
++ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
++#define dmac_chan_writel_lo(dmac, chan, reg, value) \
++ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define dmac_chan_readl_lo(dmac, chan, reg) \
++ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define set_channel_bit(dmac, reg, chan) \
++ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
++#define clear_channel_bit(dmac, reg, chan) \
++ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
++
++static int dmac_alloc_channel(struct dma_controller *_dmac)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long flags;
++ int i;
++
++ spin_lock_irqsave(&dmac->lock, flags);
++ for (i = 0; i < DMAC_NR_CHANNELS; i++)
++ if (dmac->channel[i].state == CH_STATE_FREE)
++ break;
++
++ if (i < DMAC_NR_CHANNELS) {
++ chan = &dmac->channel[i];
++ chan->state = CH_STATE_ALLOCATED;
++ } else {
++ i = -EBUSY;
++ }
++
++ spin_unlock_irqrestore(&dmac->lock, flags);
++
++ return i;
++}
++
++static void dmac_release_channel(struct dma_controller *_dmac, int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS
++ || dmac->channel[channel].state != CH_STATE_ALLOCATED);
++
++ dmac->channel[channel].state = CH_STATE_FREE;
++}
++
++static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
++ unsigned int nr_blocks)
++{
++ struct dw_dma_block *block;
++ void *p;
++ unsigned int i;
++
++ block = kmalloc(nr_blocks * sizeof(*block),
++ GFP_KERNEL);
++ if (unlikely(!block))
++ return NULL;
++
++ for (i = 0; i < nr_blocks; i++) {
++ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
++ &block[i].lli_dma_addr);
++ block[i].lli_vaddr = p;
++ if (unlikely(!p))
++ goto fail;
++ }
++
++ return block;
++
++fail:
++ for (i = 0; i < nr_blocks; i++) {
++ if (!block[i].lli_vaddr)
++ break;
++ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
++ block[i].lli_dma_addr);
++ }
++ kfree(block);
++ return NULL;
++}
++
++static void cleanup_channel(struct dw_dma_controller *dmac,
++ struct dw_dma_channel *chan)
++{
++ unsigned int i;
++
++ if (chan->nr_blocks > 1) {
++ for (i = 0; i < chan->nr_blocks; i++)
++ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
++ chan->block[i].lli_dma_addr);
++ kfree(chan->block);
++ }
++
++ chan->state = CH_STATE_ALLOCATED;
++}
++
++static int dmac_prepare_request_sg(struct dma_controller *_dmac,
++ struct dma_request_sg *req)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long ctlhi, ctllo, cfghi, cfglo;
++ unsigned long block_size;
++ unsigned int nr_blocks;
++ int ret, i, direction;
++ unsigned long flags;
++
++ spin_lock_irqsave(&dmac->lock, flags);
++
++ ret = -EINVAL;
++ if (req->req.channel >= DMAC_NR_CHANNELS
++ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++ || req->block_size > DMAC_MAX_BLOCKSIZE) {
++ spin_unlock_irqrestore(&dmac->lock, flags);
++ return -EINVAL;
++ }
++
++ chan = &dmac->channel[req->req.channel];
++ chan->state = CH_STATE_BUSY;
++ chan->req_sg = req;
++ chan->is_cyclic = 0;
++
++ /*
++ * We have marked the channel as busy, so no need to keep the
++ * lock as long as we only touch the channel-specific
++ * registers
++ */
++ spin_unlock_irqrestore(&dmac->lock, flags);
++
++ /*
++ * There may be limitations in the driver and/or the DMA
++ * controller that prevents us from sending a whole
++ * scatterlist item in one go. Taking this into account,
++ * calculate the number of block transfers we need to set up.
++ *
++ * FIXME: Let the peripheral driver know about the maximum
++ * block size we support. We really don't want to use a
++ * different block size than what was suggested by the
++ * peripheral.
++ *
++ * Each block will get its own Linked List Item (LLI) below.
++ */
++ block_size = req->block_size;
++ nr_blocks = req->nr_blocks;
++ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
++ block_size, nr_blocks, req->nr_sg);
++
++ BUG_ON(nr_blocks == 0);
++ chan->nr_blocks = nr_blocks;
++
++ ret = -EINVAL;
++ cfglo = cfghi = 0;
++ switch (req->direction) {
++ case DMA_DIR_MEM_TO_PERIPH:
++ direction = DMA_TO_DEVICE;
++ cfghi = req->periph_id << (43 - 32);
++ break;
++
++ case DMA_DIR_PERIPH_TO_MEM:
++ direction = DMA_FROM_DEVICE;
++ cfghi = req->periph_id << (39 - 32);
++ break;
++ default:
++ goto out_unclaim_channel;
++ }
++
++ chan->direction = direction;
++
++ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++
++ ctlhi = block_size >> req->width;
++ ctllo = ((req->direction << 20)
++ // | (1 << 14) | (1 << 11) // source/dest burst trans len
++ | (req->width << 4) | (req->width << 1)
++ | (1 << 0)); // interrupt enable
++
++ if (nr_blocks == 1) {
++ /* Only one block: No need to use block chaining */
++ if (direction == DMA_TO_DEVICE) {
++ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++ req->sg->dma_address);
++ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++ req->data_reg);
++ ctllo |= 2 << 7; // no dst increment
++ } else {
++ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++ req->data_reg);
++ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++ req->sg->dma_address);
++ ctllo |= 2 << 9; // no src increment
++ }
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
++ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
++ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
++ } else {
++ struct dw_dma_lli *lli, *lli_prev = NULL;
++ int j = 0, offset = 0;
++
++ ret = -ENOMEM;
++ chan->block = allocate_blocks(dmac, nr_blocks);
++ if (!chan->block)
++ goto out_unclaim_channel;
++
++ if (direction == DMA_TO_DEVICE)
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++ else
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++
++ /*
++ * Map scatterlist items to blocks. One scatterlist
++ * item may need more than one block for the reasons
++ * mentioned above.
++ */
++ for (i = 0; i < nr_blocks; i++) {
++ lli = chan->block[i].lli_vaddr;
++ if (lli_prev) {
++ lli_prev->llp = chan->block[i].lli_dma_addr;
++ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr,
++ lli_prev->sar, lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);
++ }
++ lli->llp = 0;
++ lli->ctllo = ctllo;
++ lli->ctlhi = ctlhi;
++ if (direction == DMA_TO_DEVICE) {
++ lli->sar = req->sg[j].dma_address + offset;
++ lli->dar = req->data_reg;
++ } else {
++ lli->sar = req->data_reg;
++ lli->dar = req->sg[j].dma_address + offset;
++ }
++ lli_prev = lli;
++
++ offset += block_size;
++ if (offset > req->sg[j].length) {
++ j++;
++ offset = 0;
++ }
++ }
++
++ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++ lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);
++
++ /*
++ * SAR, DAR and CTL are initialized from the LLI. We
++ * only have to enable the LLI bits in CTL.
++ */
++ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
++ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++ chan->block[0].lli_dma_addr);
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
++ }
++
++ set_channel_bit(dmac, MASK_XFER, req->req.channel);
++ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++ if (req->req.block_complete)
++ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++ else
++ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++
++ return 0;
++
++out_unclaim_channel:
++ chan->state = CH_STATE_ALLOCATED;
++ return ret;
++}
++
++static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
++ struct dma_request_cyclic *req)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long ctlhi, ctllo, cfghi, cfglo;
++ unsigned long block_size;
++ int ret, i, direction;
++ unsigned long flags;
++
++ spin_lock_irqsave(&dmac->lock, flags);
++
++ block_size = (req->buffer_size/req->periods) >> req->width;
++
++ ret = -EINVAL;
++ if (req->req.channel >= DMAC_NR_CHANNELS
++ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++ || (req->periods == 0)
++ || block_size > DMAC_MAX_BLOCKSIZE) {
++ spin_unlock_irqrestore(&dmac->lock, flags);
++ return -EINVAL;
++ }
++
++ chan = &dmac->channel[req->req.channel];
++ chan->state = CH_STATE_BUSY;
++ chan->is_cyclic = 1;
++ chan->req_cyclic = req;
++
++ /*
++ * We have marked the channel as busy, so no need to keep the
++ * lock as long as we only touch the channel-specific
++ * registers
++ */
++ spin_unlock_irqrestore(&dmac->lock, flags);
++
++ /*
++ Setup
++ */
++ BUG_ON(req->buffer_size % req->periods);
++ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
++
++ chan->nr_blocks = req->periods;
++
++ ret = -EINVAL;
++ cfglo = cfghi = 0;
++ switch (req->direction) {
++ case DMA_DIR_MEM_TO_PERIPH:
++ direction = DMA_TO_DEVICE;
++ cfghi = req->periph_id << (43 - 32);
++ break;
++
++ case DMA_DIR_PERIPH_TO_MEM:
++ direction = DMA_FROM_DEVICE;
++ cfghi = req->periph_id << (39 - 32);
++ break;
++ default:
++ goto out_unclaim_channel;
++ }
++
++ chan->direction = direction;
++
++ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++
++ ctlhi = block_size;
++ ctllo = ((req->direction << 20)
++ | (req->width << 4) | (req->width << 1)
++ | (1 << 0)); // interrupt enable
++
++ {
++ struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
++
++ ret = -ENOMEM;
++ chan->block = allocate_blocks(dmac, req->periods);
++ if (!chan->block)
++ goto out_unclaim_channel;
++
++ if (direction == DMA_TO_DEVICE)
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++ else
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++
++ /*
++ * Set up a linked list items where each period gets
++ * an item. The linked list item for the last period
++ * points back to the star of the buffer making a
++ * cyclic buffer.
++ */
++ for (i = 0; i < req->periods; i++) {
++ lli = chan->block[i].lli_vaddr;
++ if (lli_prev) {
++ lli_prev->llp = chan->block[i].lli_dma_addr;
++ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr,
++ lli_prev->sar, lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);*/
++ }
++ lli->llp = 0;
++ lli->ctllo = ctllo;
++ lli->ctlhi = ctlhi;
++ if (direction == DMA_TO_DEVICE) {
++ lli->sar = req->buffer_start + i*(block_size << req->width);
++ lli->dar = req->data_reg;
++ } else {
++ lli->sar = req->data_reg;
++ lli->dar = req->buffer_start + i*(block_size << req->width);
++ }
++ lli_prev = lli;
++ }
++ lli->llp = chan->block[0].lli_dma_addr;
++
++ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++ lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi); */
++
++ /*
++ * SAR, DAR and CTL are initialized from the LLI. We
++ * only have to enable the LLI bits in CTL.
++ */
++ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++ chan->block[0].lli_dma_addr);
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
++ }
++
++ clear_channel_bit(dmac, MASK_XFER, req->req.channel);
++ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++ if (req->req.block_complete)
++ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++ else
++ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++
++ return 0;
++
++out_unclaim_channel:
++ chan->state = CH_STATE_ALLOCATED;
++ return ret;
++}
++
++static int dmac_start_request(struct dma_controller *_dmac,
++ unsigned int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ set_channel_bit(dmac, CH_EN, channel);
++
++ return 0;
++}
++
++static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
++ unsigned int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ dma_addr_t current_pos;
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ chan = &dmac->channel[channel];
++
++ switch (chan->direction) {
++ case DMA_TO_DEVICE:
++ current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
++ break;
++ case DMA_FROM_DEVICE:
++ current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
++ break;
++ default:
++ return 0;
++ }
++
++
++ if (!current_pos) {
++ if (chan->is_cyclic) {
++ current_pos = chan->req_cyclic->buffer_start;
++ } else {
++ current_pos = chan->req_sg->sg->dma_address;
++ }
++ }
++
++ return current_pos;
++}
++
++
++static int dmac_stop_request(struct dma_controller *_dmac,
++ unsigned int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ chan = &dmac->channel[channel];
++ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
++ chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
++ dmac_chan_readl_lo(dmac, channel, DAR),
++ dmac_chan_readl_lo(dmac, channel, LLP),
++ dmac_chan_readl_hi(dmac, channel, CTL),
++ dmac_chan_readl_lo(dmac, channel, CTL));
++
++ if (chan->state == CH_STATE_BUSY) {
++ clear_channel_bit(dmac, CH_EN, channel);
++ cleanup_channel(dmac, &dmac->channel[channel]);
++ }
++
++ return 0;
++}
++
++
++static void dmac_block_complete(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_BLOCK);
++
++ while (status) {
++ struct dma_request *req;
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ if (chan->is_cyclic) {
++ BUG_ON(!chan->req_cyclic
++ || !chan->req_cyclic->req.block_complete);
++ req = &chan->req_cyclic->req;
++ } else {
++ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
++ req = &chan->req_sg->req;
++ }
++ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
++ req->block_complete(req);
++ status = dmac_readl_lo(dmac, STATUS_BLOCK);
++ }
++}
++
++static void dmac_xfer_complete(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ struct dma_request *req;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++
++ while (status) {
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
++
++ req = &chan->req_sg->req;
++ BUG_ON(!req);
++ cleanup_channel(dmac, chan);
++ if (req->xfer_complete)
++ req->xfer_complete(req);
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++ }
++}
++
++static void dmac_error(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_ERROR);
++
++ while (status) {
++ struct dma_request *req;
++
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
++ clear_channel_bit(dmac, CH_EN, chanid);
++
++ if (chan->is_cyclic) {
++ BUG_ON(!chan->req_cyclic);
++ req = &chan->req_cyclic->req;
++ } else {
++ BUG_ON(!chan->req_sg);
++ req = &chan->req_sg->req;
++ }
++
++ cleanup_channel(dmac, chan);
++ if (req->error)
++ req->error(req);
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++ }
++}
++
++static irqreturn_t dmac_interrupt(int irq, void *dev_id)
++{
++ struct dw_dma_controller *dmac = dev_id;
++ unsigned long status;
++ int ret = IRQ_NONE;
++
++ spin_lock(&dmac->lock);
++
++ status = dmac_readl_lo(dmac, STATUS_INT);
++
++ while (status) {
++ ret = IRQ_HANDLED;
++ if (status & 0x10)
++ dmac_error(dmac);
++ if (status & 0x02)
++ dmac_block_complete(dmac);
++ if (status & 0x01)
++ dmac_xfer_complete(dmac);
++
++ status = dmac_readl_lo(dmac, STATUS_INT);
++ }
++
++ spin_unlock(&dmac->lock);
++ return ret;
++}
++
++static int __devinit dmac_probe(struct platform_device *pdev)
++{
++ struct dw_dma_controller *dmac;
++ struct resource *regs;
++ int ret;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++
++ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
++ if (!dmac)
++ return -ENOMEM;
++ memset(dmac, 0, sizeof(*dmac));
++
++ dmac->hclk = clk_get(&pdev->dev, "hclk");
++ if (IS_ERR(dmac->hclk)) {
++ ret = PTR_ERR(dmac->hclk);
++ goto out_free_dmac;
++ }
++ clk_enable(dmac->hclk);
++
++ ret = -ENOMEM;
++ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
++ sizeof(struct dw_dma_lli), 4, 0);
++ if (!dmac->lli_pool)
++ goto out_disable_clk;
++
++ spin_lock_init(&dmac->lock);
++ dmac->dma.dev = &pdev->dev;
++ dmac->dma.alloc_channel = dmac_alloc_channel;
++ dmac->dma.release_channel = dmac_release_channel;
++ dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
++ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
++ dmac->dma.start_request = dmac_start_request;
++ dmac->dma.stop_request = dmac_stop_request;
++ dmac->dma.get_current_pos = dmac_get_current_pos;
++
++ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!dmac->regs)
++ goto out_free_pool;
++
++ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
++ SA_SAMPLE_RANDOM, pdev->name, dmac);
++ if (ret)
++ goto out_unmap_regs;
++
++ /* Enable the DMA controller */
++ dmac_writel_lo(dmac, CFG, 1);
++
++ register_dma_controller(&dmac->dma);
++
++ printk(KERN_INFO
++ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
++ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
++
++ return 0;
++
++out_unmap_regs:
++ iounmap(dmac->regs);
++out_free_pool:
++ dma_pool_destroy(dmac->lli_pool);
++out_disable_clk:
++ clk_disable(dmac->hclk);
++ clk_put(dmac->hclk);
++out_free_dmac:
++ kfree(dmac);
++ return ret;
++}
++
++static struct platform_driver dmac_driver = {
++ .probe = dmac_probe,
++ .driver = {
++ .name = "dmaca",
++ },
++};
++
++static int __init dmac_init(void)
++{
++ return platform_driver_register(&dmac_driver);
++}
++subsys_initcall(dmac_init);
++
++static void __exit dmac_exit(void)
++{
++ platform_driver_unregister(&dmac_driver);
++}
++module_exit(dmac_exit);
++
++MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_LICENSE("GPL");
+diff --git a/arch/avr32/drivers/dw-dmac.h b/arch/avr32/drivers/dw-dmac.h
+new file mode 100644
+index 0000000..1f67921
+--- /dev/null
++++ b/arch/avr32/drivers/dw-dmac.h
+@@ -0,0 +1,42 @@
++/*
++ * Driver for the Synopsys DesignWare DMA Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __AVR32_DW_DMAC_H__
++#define __AVR32_DW_DMAC_H__
++
++#define DW_DMAC_CFG 0x398
++#define DW_DMAC_CH_EN 0x3a0
++
++#define DW_DMAC_STATUS_XFER 0x2e8
++#define DW_DMAC_STATUS_BLOCK 0x2f0
++#define DW_DMAC_STATUS_ERROR 0x308
++
++#define DW_DMAC_MASK_XFER 0x310
++#define DW_DMAC_MASK_BLOCK 0x318
++#define DW_DMAC_MASK_ERROR 0x330
++
++#define DW_DMAC_CLEAR_XFER 0x338
++#define DW_DMAC_CLEAR_BLOCK 0x340
++#define DW_DMAC_CLEAR_ERROR 0x358
++
++#define DW_DMAC_STATUS_INT 0x360
++
++#define DW_DMAC_CHAN_SAR 0x000
++#define DW_DMAC_CHAN_DAR 0x008
++#define DW_DMAC_CHAN_LLP 0x010
++#define DW_DMAC_CHAN_CTL 0x018
++#define DW_DMAC_CHAN_SSTAT 0x020
++#define DW_DMAC_CHAN_DSTAT 0x028
++#define DW_DMAC_CHAN_SSTATAR 0x030
++#define DW_DMAC_CHAN_DSTATAR 0x038
++#define DW_DMAC_CHAN_CFG 0x040
++#define DW_DMAC_CHAN_SGR 0x048
++#define DW_DMAC_CHAN_DSR 0x050
++
++#endif /* __AVR32_DW_DMAC_H__ */
+diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile
+index 90e5aff..b6afc0c 100644
+--- a/arch/avr32/kernel/Makefile
++++ b/arch/avr32/kernel/Makefile
+@@ -9,6 +9,7 @@ obj-y += syscall_table.o syscall-stubs.o irq.o
+ obj-y += setup.o traps.o semaphore.o ptrace.o
+ obj-y += signal.o sys_avr32.o process.o time.o
+ obj-y += init_task.o switch_to.o cpu.o
++obj-y += dma-controller.o
+ obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
+ obj-$(CONFIG_KPROBES) += kprobes.o
+
+diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c
+index 2e72fd2..2714cf6 100644
+--- a/arch/avr32/kernel/cpu.c
++++ b/arch/avr32/kernel/cpu.c
+@@ -209,16 +209,17 @@ static const char *mmu_types[] = {
+ void __init setup_processor(void)
+ {
+ unsigned long config0, config1;
++ unsigned long features;
+ unsigned cpu_id, cpu_rev, arch_id, arch_rev, mmu_type;
+ unsigned tmp;
+
+- config0 = sysreg_read(CONFIG0); /* 0x0000013e; */
+- config1 = sysreg_read(CONFIG1); /* 0x01f689a2; */
+- cpu_id = config0 >> 24;
+- cpu_rev = (config0 >> 16) & 0xff;
+- arch_id = (config0 >> 13) & 0x07;
+- arch_rev = (config0 >> 10) & 0x07;
+- mmu_type = (config0 >> 7) & 0x03;
++ config0 = sysreg_read(CONFIG0);
++ config1 = sysreg_read(CONFIG1);
++ cpu_id = SYSREG_BFEXT(PROCESSORID, config0);
++ cpu_rev = SYSREG_BFEXT(PROCESSORREVISION, config0);
++ arch_id = SYSREG_BFEXT(AT, config0);
++ arch_rev = SYSREG_BFEXT(AR, config0);
++ mmu_type = SYSREG_BFEXT(MMUT, config0);
+
+ boot_cpu_data.arch_type = arch_id;
+ boot_cpu_data.cpu_type = cpu_id;
+@@ -226,16 +227,16 @@ void __init setup_processor(void)
+ boot_cpu_data.cpu_revision = cpu_rev;
+ boot_cpu_data.tlb_config = mmu_type;
+
+- tmp = (config1 >> 13) & 0x07;
++ tmp = SYSREG_BFEXT(ILSZ, config1);
+ if (tmp) {
+- boot_cpu_data.icache.ways = 1 << ((config1 >> 10) & 0x07);
+- boot_cpu_data.icache.sets = 1 << ((config1 >> 16) & 0x0f);
++ boot_cpu_data.icache.ways = 1 << SYSREG_BFEXT(IASS, config1);
++ boot_cpu_data.icache.sets = 1 << SYSREG_BFEXT(ISET, config1);
+ boot_cpu_data.icache.linesz = 1 << (tmp + 1);
+ }
+- tmp = (config1 >> 3) & 0x07;
++ tmp = SYSREG_BFEXT(DLSZ, config1);
+ if (tmp) {
+- boot_cpu_data.dcache.ways = 1 << (config1 & 0x07);
+- boot_cpu_data.dcache.sets = 1 << ((config1 >> 6) & 0x0f);
++ boot_cpu_data.dcache.ways = 1 << SYSREG_BFEXT(DASS, config1);
++ boot_cpu_data.dcache.sets = 1 << SYSREG_BFEXT(DSET, config1);
+ boot_cpu_data.dcache.linesz = 1 << (tmp + 1);
+ }
+
+@@ -250,16 +251,39 @@ void __init setup_processor(void)
+ cpu_names[cpu_id], cpu_id, cpu_rev,
+ arch_names[arch_id], arch_rev);
+ printk ("CPU: MMU configuration: %s\n", mmu_types[mmu_type]);
++
+ printk ("CPU: features:");
+- if (config0 & (1 << 6))
+- printk(" fpu");
+- if (config0 & (1 << 5))
+- printk(" java");
+- if (config0 & (1 << 4))
+- printk(" perfctr");
+- if (config0 & (1 << 3))
++ features = 0;
++ if (config0 & SYSREG_BIT(CONFIG0_R)) {
++ features |= AVR32_FEATURE_RMW;
++ printk(" rmw");
++ }
++ if (config0 & SYSREG_BIT(CONFIG0_D)) {
++ features |= AVR32_FEATURE_DSP;
++ printk(" dsp");
++ }
++ if (config0 & SYSREG_BIT(CONFIG0_S)) {
++ features |= AVR32_FEATURE_SIMD;
++ printk(" simd");
++ }
++ if (config0 & SYSREG_BIT(CONFIG0_O)) {
++ features |= AVR32_FEATURE_OCD;
+ printk(" ocd");
++ }
++ if (config0 & SYSREG_BIT(CONFIG0_P)) {
++ features |= AVR32_FEATURE_PCTR;
++ printk(" perfctr");
++ }
++ if (config0 & SYSREG_BIT(CONFIG0_J)) {
++ features |= AVR32_FEATURE_JAVA;
++ printk(" java");
++ }
++ if (config0 & SYSREG_BIT(CONFIG0_F)) {
++ features |= AVR32_FEATURE_FPU;
++ printk(" fpu");
++ }
+ printk("\n");
++ boot_cpu_data.features = features;
+ }
+
+ #ifdef CONFIG_PROC_FS
+diff --git a/arch/avr32/kernel/dma-controller.c b/arch/avr32/kernel/dma-controller.c
+new file mode 100644
+index 0000000..fb654b3
+--- /dev/null
++++ b/arch/avr32/kernel/dma-controller.c
+@@ -0,0 +1,34 @@
++/*
++ * Preliminary DMA controller framework for AVR32
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <asm/dma-controller.h>
++
++static LIST_HEAD(controllers);
++
++int register_dma_controller(struct dma_controller *dmac)
++{
++ static int next_id;
++
++ dmac->id = next_id++;
++ list_add_tail(&dmac->list, &controllers);
++
++ return 0;
++}
++EXPORT_SYMBOL(register_dma_controller);
++
++struct dma_controller *find_dma_controller(int id)
++{
++ struct dma_controller *dmac;
++
++ list_for_each_entry(dmac, &controllers, list)
++ if (dmac->id == id)
++ return dmac;
++ return NULL;
++}
++EXPORT_SYMBOL(find_dma_controller);
+diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
+index eeb6679..42657f1 100644
+--- a/arch/avr32/kernel/entry-avr32b.S
++++ b/arch/avr32/kernel/entry-avr32b.S
+@@ -100,55 +100,49 @@ dtlb_miss_write:
+
+ .global tlb_miss_common
+ tlb_miss_common:
+- mfsr r0, SYSREG_PTBR
+- mfsr r1, SYSREG_TLBEAR
++ mfsr r0, SYSREG_TLBEAR
++ mfsr r1, SYSREG_PTBR
+
+ /* Is it the vmalloc space? */
+- bld r1, 31
++ bld r0, 31
+ brcs handle_vmalloc_miss
+
+ /* First level lookup */
+ pgtbl_lookup:
+- lsr r2, r1, PGDIR_SHIFT
+- ld.w r0, r0[r2 << 2]
+- bld r0, _PAGE_BIT_PRESENT
++ lsr r2, r0, PGDIR_SHIFT
++ ld.w r3, r1[r2 << 2]
++ bfextu r1, r0, PAGE_SHIFT, PGDIR_SHIFT - PAGE_SHIFT
++ bld r3, _PAGE_BIT_PRESENT
+ brcc page_table_not_present
+
+- /* TODO: Check access rights on page table if necessary */
+-
+ /* Translate to virtual address in P1. */
+- andl r0, 0xf000
+- sbr r0, 31
++ andl r3, 0xf000
++ sbr r3, 31
+
+ /* Second level lookup */
+- lsl r1, (32 - PGDIR_SHIFT)
+- lsr r1, (32 - PGDIR_SHIFT) + PAGE_SHIFT
+- add r2, r0, r1 << 2
+- ld.w r1, r2[0]
+- bld r1, _PAGE_BIT_PRESENT
++ ld.w r2, r3[r1 << 2]
++ mfsr r0, SYSREG_TLBARLO
++ bld r2, _PAGE_BIT_PRESENT
+ brcc page_not_present
+
+ /* Mark the page as accessed */
+- sbr r1, _PAGE_BIT_ACCESSED
+- st.w r2[0], r1
++ sbr r2, _PAGE_BIT_ACCESSED
++ st.w r3[r1 << 2], r2
+
+ /* Drop software flags */
+- andl r1, _PAGE_FLAGS_HARDWARE_MASK & 0xffff
+- mtsr SYSREG_TLBELO, r1
++ andl r2, _PAGE_FLAGS_HARDWARE_MASK & 0xffff
++ mtsr SYSREG_TLBELO, r2
+
+ /* Figure out which entry we want to replace */
+- mfsr r0, SYSREG_TLBARLO
++ mfsr r1, SYSREG_MMUCR
+ clz r2, r0
+ brcc 1f
+- mov r1, -1 /* All entries have been accessed, */
+- mtsr SYSREG_TLBARLO, r1 /* so reset TLBAR */
+- mov r2, 0 /* and start at 0 */
+-1: mfsr r1, SYSREG_MMUCR
+- lsl r2, 14
+- andl r1, 0x3fff, COH
+- or r1, r2
+- mtsr SYSREG_MMUCR, r1
++ mov r3, -1 /* All entries have been accessed, */
++ mov r2, 0 /* so start at 0 */
++ mtsr SYSREG_TLBARLO, r3 /* and reset TLBAR */
+
++1: bfins r1, r2, SYSREG_DRP_OFFSET, SYSREG_DRP_SIZE
++ mtsr SYSREG_MMUCR, r1
+ tlbw
+
+ tlbmiss_restore
+@@ -156,8 +150,8 @@ pgtbl_lookup:
+
+ handle_vmalloc_miss:
+ /* Simply do the lookup in init's page table */
+- mov r0, lo(swapper_pg_dir)
+- orh r0, hi(swapper_pg_dir)
++ mov r1, lo(swapper_pg_dir)
++ orh r1, hi(swapper_pg_dir)
+ rjmp pgtbl_lookup
+
+
+@@ -340,12 +334,34 @@ do_bus_error_read:
+ do_nmi_ll:
+ sub sp, 4
+ stmts --sp, r0-lr
+- /* FIXME: Make sure RAR_NMI and RSR_NMI are pushed instead of *_EX */
+- rcall save_full_context_ex
++ mfsr r9, SYSREG_RSR_NMI
++ mfsr r8, SYSREG_RAR_NMI
++ bfextu r0, r9, MODE_SHIFT, 3
++ brne 2f
++
++1: pushm r8, r9 /* PC and SR */
+ mfsr r12, SYSREG_ECR
+ mov r11, sp
+ rcall do_nmi
+- rjmp bad_return
++ popm r8-r9
++ mtsr SYSREG_RAR_NMI, r8
++ tst r0, r0
++ mtsr SYSREG_RSR_NMI, r9
++ brne 3f
++
++ ldmts sp++, r0-lr
++ sub sp, -4 /* skip r12_orig */
++ rete
++
++2: sub r10, sp, -(FRAME_SIZE_FULL - REG_LR)
++ stdsp sp[4], r10 /* replace saved SP */
++ rjmp 1b
++
++3: popm lr
++ sub sp, -4 /* skip sp */
++ popm r0-r12
++ sub sp, -4 /* skip r12_orig */
++ rete
+
+ handle_address_fault:
+ sub sp, 4
+@@ -630,9 +646,12 @@ irq_level\level:
+ rcall do_IRQ
+
+ lddsp r4, sp[REG_SR]
+- andh r4, (MODE_MASK >> 16), COH
++ bfextu r4, r4, SYSREG_M0_OFFSET, 3
++ cp.w r4, MODE_SUPERVISOR >> SYSREG_M0_OFFSET
++ breq 2f
++ cp.w r4, MODE_USER >> SYSREG_M0_OFFSET
+ #ifdef CONFIG_PREEMPT
+- brne 2f
++ brne 3f
+ #else
+ brne 1f
+ #endif
+@@ -649,9 +668,18 @@ irq_level\level:
+ sub sp, -4 /* ignore r12_orig */
+ rete
+
++2: get_thread_info r0
++ ld.w r1, r0[TI_flags]
++ bld r1, TIF_CPU_GOING_TO_SLEEP
+ #ifdef CONFIG_PREEMPT
+-2:
+- get_thread_info r0
++ brcc 3f
++#else
++ brcc 1b
++#endif
++ sub r1, pc, . - cpu_idle_skip_sleep
++ stdsp sp[REG_PC], r1
++#ifdef CONFIG_PREEMPT
++3: get_thread_info r0
+ ld.w r2, r0[TI_preempt_count]
+ cp.w r2, 0
+ brne 1b
+@@ -662,12 +690,32 @@ irq_level\level:
+ bld r4, SYSREG_GM_OFFSET
+ brcs 1b
+ rcall preempt_schedule_irq
+- rjmp 1b
+ #endif
++ rjmp 1b
+ .endm
+
+ .section .irq.text,"ax",@progbits
+
++.global cpu_idle_sleep
++cpu_idle_sleep:
++ mask_interrupts
++ get_thread_info r8
++ ld.w r9, r8[TI_flags]
++ bld r9, TIF_NEED_RESCHED
++ brcs cpu_idle_enable_int_and_exit
++ sbr r9, TIF_CPU_GOING_TO_SLEEP
++ st.w r8[TI_flags], r9
++ unmask_interrupts
++ sleep 0
++cpu_idle_skip_sleep:
++ mask_interrupts
++ ld.w r9, r8[TI_flags]
++ cbr r9, TIF_CPU_GOING_TO_SLEEP
++ st.w r8[TI_flags], r9
++cpu_idle_enable_int_and_exit:
++ unmask_interrupts
++ retal r12
++
+ .global irq_level0
+ .global irq_level1
+ .global irq_level2
+diff --git a/arch/avr32/kernel/irq.c b/arch/avr32/kernel/irq.c
+index fd31124..61f2de2 100644
+--- a/arch/avr32/kernel/irq.c
++++ b/arch/avr32/kernel/irq.c
+@@ -7,15 +7,6 @@
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+- *
+- * This file contains the code used by various IRQ handling routines:
+- * asking for different IRQ's should be done through these routines
+- * instead of just grabbing them. Thus setups with different IRQ numbers
+- * shouldn't result in any weird surprises, and installing new handlers
+- * should be easier.
+- *
+- * IRQ's are in fact implemented a bit like signal handlers for the kernel.
+- * Naturally it's not a 1:1 relation, but there are similarities.
+ */
+
+ #include <linux/interrupt.h>
+diff --git a/arch/avr32/kernel/kprobes.c b/arch/avr32/kernel/kprobes.c
+index d0abbca..037d7bd 100644
+--- a/arch/avr32/kernel/kprobes.c
++++ b/arch/avr32/kernel/kprobes.c
+@@ -179,7 +179,7 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs)
+ return 1;
+ }
+
+-static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
++int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+ {
+ struct kprobe *cur = kprobe_running();
+
+@@ -216,11 +216,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
+ if (post_kprobe_handler(args->regs))
+ ret = NOTIFY_STOP;
+ break;
+- case DIE_FAULT:
+- if (kprobe_running()
+- && kprobe_fault_handler(args->regs, args->trapnr))
+- ret = NOTIFY_STOP;
+- break;
+ default:
+ break;
+ }
+diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c
+index b599eae..1167fe9 100644
+--- a/arch/avr32/kernel/module.c
++++ b/arch/avr32/kernel/module.c
+@@ -12,10 +12,11 @@
+ * published by the Free Software Foundation.
+ */
+
+-#include <linux/moduleloader.h>
+-#include <linux/module.h>
+-#include <linux/kernel.h>
++#include <linux/bug.h>
+ #include <linux/elf.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleloader.h>
+ #include <linux/vmalloc.h>
+
+ void *module_alloc(unsigned long size)
+@@ -315,10 +316,10 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
+ vfree(module->arch.syminfo);
+ module->arch.syminfo = NULL;
+
+- return 0;
++ return module_bug_finalize(hdr, sechdrs, module);
+ }
+
+ void module_arch_cleanup(struct module *module)
+ {
+-
++ module_bug_cleanup(module);
+ }
+diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
+index 0b43259..4e4181e 100644
+--- a/arch/avr32/kernel/process.c
++++ b/arch/avr32/kernel/process.c
+@@ -11,6 +11,7 @@
+ #include <linux/fs.h>
+ #include <linux/ptrace.h>
+ #include <linux/reboot.h>
++#include <linux/uaccess.h>
+ #include <linux/unistd.h>
+
+ #include <asm/sysreg.h>
+@@ -19,6 +20,8 @@
+ void (*pm_power_off)(void) = NULL;
+ EXPORT_SYMBOL(pm_power_off);
+
++extern void cpu_idle_sleep(void);
++
+ /*
+ * This file handles the architecture-dependent parts of process handling..
+ */
+@@ -27,9 +30,8 @@ void cpu_idle(void)
+ {
+ /* endless idle loop with no priority at all */
+ while (1) {
+- /* TODO: Enter sleep mode */
+ while (!need_resched())
+- cpu_relax();
++ cpu_idle_sleep();
+ preempt_enable_no_resched();
+ schedule();
+ preempt_disable();
+@@ -114,39 +116,178 @@ void release_thread(struct task_struct *dead_task)
+ /* do nothing */
+ }
+
++static void dump_mem(const char *str, const char *log_lvl,
++ unsigned long bottom, unsigned long top)
++{
++ unsigned long p;
++ int i;
++
++ printk("%s%s(0x%08lx to 0x%08lx)\n", log_lvl, str, bottom, top);
++
++ for (p = bottom & ~31; p < top; ) {
++ printk("%s%04lx: ", log_lvl, p & 0xffff);
++
++ for (i = 0; i < 8; i++, p += 4) {
++ unsigned int val;
++
++ if (p < bottom || p >= top)
++ printk(" ");
++ else {
++ if (__get_user(val, (unsigned int __user *)p)) {
++ printk("\n");
++ goto out;
++ }
++ printk("%08x ", val);
++ }
++ }
++ printk("\n");
++ }
++
++out:
++ return;
++}
++
++static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p)
++{
++ return (p > (unsigned long)tinfo)
++ && (p < (unsigned long)tinfo + THREAD_SIZE - 3);
++}
++
++#ifdef CONFIG_FRAME_POINTER
++static void show_trace_log_lvl(struct task_struct *tsk, unsigned long *sp,
++ struct pt_regs *regs, const char *log_lvl)
++{
++ unsigned long lr, fp;
++ struct thread_info *tinfo;
++
++ if (regs)
++ fp = regs->r7;
++ else if (tsk == current)
++ asm("mov %0, r7" : "=r"(fp));
++ else
++ fp = tsk->thread.cpu_context.r7;
++
++ /*
++ * Walk the stack as long as the frame pointer (a) is within
++ * the kernel stack of the task, and (b) it doesn't move
++ * downwards.
++ */
++ tinfo = task_thread_info(tsk);
++ printk("%sCall trace:\n", log_lvl);
++ while (valid_stack_ptr(tinfo, fp)) {
++ unsigned long new_fp;
++
++ lr = *(unsigned long *)fp;
++#ifdef CONFIG_KALLSYMS
++ printk("%s [<%08lx>] ", log_lvl, lr);
++#else
++ printk(" [<%08lx>] ", lr);
++#endif
++ print_symbol("%s\n", lr);
++
++ new_fp = *(unsigned long *)(fp + 4);
++ if (new_fp <= fp)
++ break;
++ fp = new_fp;
++ }
++ printk("\n");
++}
++#else
++static void show_trace_log_lvl(struct task_struct *tsk, unsigned long *sp,
++ struct pt_regs *regs, const char *log_lvl)
++{
++ unsigned long addr;
++
++ printk("%sCall trace:\n", log_lvl);
++
++ while (!kstack_end(sp)) {
++ addr = *sp++;
++ if (kernel_text_address(addr)) {
++#ifdef CONFIG_KALLSYMS
++ printk("%s [<%08lx>] ", log_lvl, addr);
++#else
++ printk(" [<%08lx>] ", addr);
++#endif
++ print_symbol("%s\n", addr);
++ }
++ }
++ printk("\n");
++}
++#endif
++
++void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp,
++ struct pt_regs *regs, const char *log_lvl)
++{
++ struct thread_info *tinfo;
++
++ if (sp == 0) {
++ if (tsk)
++ sp = tsk->thread.cpu_context.ksp;
++ else
++ sp = (unsigned long)&tinfo;
++ }
++ if (!tsk)
++ tsk = current;
++
++ tinfo = task_thread_info(tsk);
++
++ if (valid_stack_ptr(tinfo, sp)) {
++ dump_mem("Stack: ", log_lvl, sp,
++ THREAD_SIZE + (unsigned long)tinfo);
++ show_trace_log_lvl(tsk, (unsigned long *)sp, regs, log_lvl);
++ }
++}
++
++void show_stack(struct task_struct *tsk, unsigned long *stack)
++{
++ show_stack_log_lvl(tsk, (unsigned long)stack, NULL, "");
++}
++
++void dump_stack(void)
++{
++ unsigned long stack;
++
++ show_trace_log_lvl(current, &stack, NULL, "");
++}
++EXPORT_SYMBOL(dump_stack);
++
+ static const char *cpu_modes[] = {
+ "Application", "Supervisor", "Interrupt level 0", "Interrupt level 1",
+ "Interrupt level 2", "Interrupt level 3", "Exception", "NMI"
+ };
+
+-void show_regs(struct pt_regs *regs)
++void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl)
+ {
+ unsigned long sp = regs->sp;
+ unsigned long lr = regs->lr;
+ unsigned long mode = (regs->sr & MODE_MASK) >> MODE_SHIFT;
+
+- if (!user_mode(regs))
++ if (!user_mode(regs)) {
+ sp = (unsigned long)regs + FRAME_SIZE_FULL;
+
+- print_symbol("PC is at %s\n", instruction_pointer(regs));
+- print_symbol("LR is at %s\n", lr);
+- printk("pc : [<%08lx>] lr : [<%08lx>] %s\n"
+- "sp : %08lx r12: %08lx r11: %08lx\n",
+- instruction_pointer(regs),
+- lr, print_tainted(), sp, regs->r12, regs->r11);
+- printk("r10: %08lx r9 : %08lx r8 : %08lx\n",
+- regs->r10, regs->r9, regs->r8);
+- printk("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
+- regs->r7, regs->r6, regs->r5, regs->r4);
+- printk("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
+- regs->r3, regs->r2, regs->r1, regs->r0);
+- printk("Flags: %c%c%c%c%c\n",
++ printk("%s", log_lvl);
++ print_symbol("PC is at %s\n", instruction_pointer(regs));
++ printk("%s", log_lvl);
++ print_symbol("LR is at %s\n", lr);
++ }
++
++ printk("%spc : [<%08lx>] lr : [<%08lx>] %s\n"
++ "%ssp : %08lx r12: %08lx r11: %08lx\n",
++ log_lvl, instruction_pointer(regs), lr, print_tainted(),
++ log_lvl, sp, regs->r12, regs->r11);
++ printk("%sr10: %08lx r9 : %08lx r8 : %08lx\n",
++ log_lvl, regs->r10, regs->r9, regs->r8);
++ printk("%sr7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
++ log_lvl, regs->r7, regs->r6, regs->r5, regs->r4);
++ printk("%sr3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
++ log_lvl, regs->r3, regs->r2, regs->r1, regs->r0);
++ printk("%sFlags: %c%c%c%c%c\n", log_lvl,
+ regs->sr & SR_Q ? 'Q' : 'q',
+ regs->sr & SR_V ? 'V' : 'v',
+ regs->sr & SR_N ? 'N' : 'n',
+ regs->sr & SR_Z ? 'Z' : 'z',
+ regs->sr & SR_C ? 'C' : 'c');
+- printk("Mode bits: %c%c%c%c%c%c%c%c%c\n",
++ printk("%sMode bits: %c%c%c%c%c%c%c%c%c\n", log_lvl,
+ regs->sr & SR_H ? 'H' : 'h',
+ regs->sr & SR_R ? 'R' : 'r',
+ regs->sr & SR_J ? 'J' : 'j',
+@@ -156,9 +297,21 @@ void show_regs(struct pt_regs *regs)
+ regs->sr & SR_I1M ? '1' : '.',
+ regs->sr & SR_I0M ? '0' : '.',
+ regs->sr & SR_GM ? 'G' : 'g');
+- printk("CPU Mode: %s\n", cpu_modes[mode]);
++ printk("%sCPU Mode: %s\n", log_lvl, cpu_modes[mode]);
++ printk("%sProcess: %s [%d] (task: %p thread: %p)\n",
++ log_lvl, current->comm, current->pid, current,
++ task_thread_info(current));
++}
++
++void show_regs(struct pt_regs *regs)
++{
++ unsigned long sp = regs->sp;
++
++ if (!user_mode(regs))
++ sp = (unsigned long)regs + FRAME_SIZE_FULL;
+
+- show_trace(NULL, (unsigned long *)sp, regs);
++ show_regs_log_lvl(regs, "");
++ show_trace_log_lvl(current, (unsigned long *)sp, regs, "");
+ }
+ EXPORT_SYMBOL(show_regs);
+
+diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
+index a1a7c3c..b279d66 100644
+--- a/arch/avr32/kernel/setup.c
++++ b/arch/avr32/kernel/setup.c
+@@ -8,12 +8,14 @@
+
+ #include <linux/clk.h>
+ #include <linux/init.h>
++#include <linux/initrd.h>
+ #include <linux/sched.h>
+ #include <linux/console.h>
+ #include <linux/ioport.h>
+ #include <linux/bootmem.h>
+ #include <linux/fs.h>
+ #include <linux/module.h>
++#include <linux/pfn.h>
+ #include <linux/root_dev.h>
+ #include <linux/cpu.h>
+ #include <linux/kernel.h>
+@@ -30,13 +32,6 @@
+ extern int root_mountflags;
+
+ /*
+- * Bootloader-provided information about physical memory
+- */
+-struct tag_mem_range *mem_phys;
+-struct tag_mem_range *mem_reserved;
+-struct tag_mem_range *mem_ramdisk;
+-
+-/*
+ * Initialize loops_per_jiffy as 5000000 (500MIPS).
+ * Better make it too large than too small...
+ */
+@@ -48,48 +43,193 @@ EXPORT_SYMBOL(boot_cpu_data);
+ static char __initdata command_line[COMMAND_LINE_SIZE];
+
+ /*
+- * Should be more than enough, but if you have a _really_ complex
+- * setup, you might need to increase the size of this...
++ * Standard memory resources
+ */
+-static struct tag_mem_range __initdata mem_range_cache[32];
+-static unsigned mem_range_next_free;
++static struct resource __initdata kernel_data = {
++ .name = "Kernel data",
++ .start = 0,
++ .end = 0,
++ .flags = IORESOURCE_MEM,
++};
++static struct resource __initdata kernel_code = {
++ .name = "Kernel code",
++ .start = 0,
++ .end = 0,
++ .flags = IORESOURCE_MEM,
++ .sibling = &kernel_data,
++};
+
+ /*
+- * Standard memory resources
++ * Available system RAM and reserved regions as singly linked
++ * lists. These lists are traversed using the sibling pointer in
++ * struct resource and are kept sorted at all times.
+ */
+-static struct resource mem_res[] = {
+- {
+- .name = "Kernel code",
+- .start = 0,
+- .end = 0,
+- .flags = IORESOURCE_MEM
+- },
+- {
+- .name = "Kernel data",
+- .start = 0,
+- .end = 0,
+- .flags = IORESOURCE_MEM,
+- },
+-};
++static struct resource *__initdata system_ram;
++static struct resource *__initdata reserved = &kernel_code;
++
++/*
++ * We need to allocate these before the bootmem allocator is up and
++ * running, so we need this "cache". 32 entries are probably enough
++ * for all but the most insanely complex systems.
++ */
++static struct resource __initdata res_cache[32];
++static unsigned int __initdata res_cache_next_free;
++
++static void __init resource_init(void)
++{
++ struct resource *mem, *res;
++ struct resource *new;
++
++ kernel_code.start = __pa(init_mm.start_code);
++
++ for (mem = system_ram; mem; mem = mem->sibling) {
++ new = alloc_bootmem_low(sizeof(struct resource));
++ memcpy(new, mem, sizeof(struct resource));
++
++ new->sibling = NULL;
++ if (request_resource(&iomem_resource, new))
++ printk(KERN_WARNING "Bad RAM resource %08x-%08x\n",
++ mem->start, mem->end);
++ }
++
++ for (res = reserved; res; res = res->sibling) {
++ new = alloc_bootmem_low(sizeof(struct resource));
++ memcpy(new, res, sizeof(struct resource));
++
++ new->sibling = NULL;
++ if (insert_resource(&iomem_resource, new))
++ printk(KERN_WARNING
++ "Bad reserved resource %s (%08x-%08x)\n",
++ res->name, res->start, res->end);
++ }
++}
++
++static void __init
++add_physical_memory(resource_size_t start, resource_size_t end)
++{
++ struct resource *new, *next, **pprev;
++
++ for (pprev = &system_ram, next = system_ram; next;
++ pprev = &next->sibling, next = next->sibling) {
++ if (end < next->start)
++ break;
++ if (start <= next->end) {
++ printk(KERN_WARNING
++ "Warning: Physical memory map is broken\n");
++ printk(KERN_WARNING
++ "Warning: %08x-%08x overlaps %08x-%08x\n",
++ start, end, next->start, next->end);
++ return;
++ }
++ }
++
++ if (res_cache_next_free >= ARRAY_SIZE(res_cache)) {
++ printk(KERN_WARNING
++ "Warning: Failed to add physical memory %08x-%08x\n",
++ start, end);
++ return;
++ }
++
++ new = &res_cache[res_cache_next_free++];
++ new->start = start;
++ new->end = end;
++ new->name = "System RAM";
++ new->flags = IORESOURCE_MEM;
++
++ *pprev = new;
++}
++
++static int __init
++add_reserved_region(resource_size_t start, resource_size_t end,
++ const char *name)
++{
++ struct resource *new, *next, **pprev;
++
++ if (end < start)
++ return -EINVAL;
++
++ if (res_cache_next_free >= ARRAY_SIZE(res_cache))
++ return -ENOMEM;
++
++ for (pprev = &reserved, next = reserved; next;
++ pprev = &next->sibling, next = next->sibling) {
++ if (end < next->start)
++ break;
++ if (start <= next->end)
++ return -EBUSY;
++ }
++
++ new = &res_cache[res_cache_next_free++];
++ new->start = start;
++ new->end = end;
++ new->name = name;
++ new->flags = IORESOURCE_MEM;
++
++ *pprev = new;
++
++ return 0;
++}
++
++static unsigned long __init
++find_free_region(const struct resource *mem, resource_size_t size,
++ resource_size_t align)
++{
++ struct resource *res;
++ unsigned long target;
++
++ target = ALIGN(mem->start, align);
++ for (res = reserved; res; res = res->sibling) {
++ if ((target + size) <= res->start)
++ break;
++ if (target <= res->end)
++ target = ALIGN(res->end + 1, align);
++ }
++
++ if ((target + size) > (mem->end + 1))
++ return mem->end + 1;
++
++ return target;
++}
++
++static int __init
++alloc_reserved_region(resource_size_t *start, resource_size_t size,
++ resource_size_t align, const char *name)
++{
++ struct resource *mem;
++ resource_size_t target;
++ int ret;
++
++ for (mem = system_ram; mem; mem = mem->sibling) {
++ target = find_free_region(mem, size, align);
++ if (target <= mem->end) {
++ ret = add_reserved_region(target, target + size - 1,
++ name);
++ if (!ret)
++ *start = target;
++ return ret;
++ }
++ }
+
+-#define kernel_code mem_res[0]
+-#define kernel_data mem_res[1]
++ return -ENOMEM;
++}
+
+ /*
+ * Early framebuffer allocation. Works as follows:
+ * - If fbmem_size is zero, nothing will be allocated or reserved.
+ * - If fbmem_start is zero when setup_bootmem() is called,
+- * fbmem_size bytes will be allocated from the bootmem allocator.
++ * a block of fbmem_size bytes will be reserved before bootmem
++ * initialization. It will be aligned to the largest page size
++ * that fbmem_size is a multiple of.
+ * - If fbmem_start is nonzero, an area of size fbmem_size will be
+- * reserved at the physical address fbmem_start if necessary. If
+- * the area isn't in a memory region known to the kernel, it will
+- * be left alone.
++ * reserved at the physical address fbmem_start if possible. If
++ * it collides with other reserved memory, a different block of
++ * same size will be allocated, just as if fbmem_start was zero.
+ *
+ * Board-specific code may use these variables to set up platform data
+ * for the framebuffer driver if fbmem_size is nonzero.
+ */
+-static unsigned long __initdata fbmem_start;
+-static unsigned long __initdata fbmem_size;
++resource_size_t __initdata fbmem_start;
++resource_size_t __initdata fbmem_size;
+
+ /*
+ * "fbmem=xxx[kKmM]" allocates the specified amount of boot memory for
+@@ -103,48 +243,42 @@ static unsigned long __initdata fbmem_size;
+ */
+ static int __init early_parse_fbmem(char *p)
+ {
++ int ret;
++ unsigned long align;
++
+ fbmem_size = memparse(p, &p);
+- if (*p == '@')
++ if (*p == '@') {
+ fbmem_start = memparse(p, &p);
+- return 0;
+-}
+-early_param("fbmem", early_parse_fbmem);
+-
+-static inline void __init resource_init(void)
+-{
+- struct tag_mem_range *region;
+-
+- kernel_code.start = __pa(init_mm.start_code);
+- kernel_code.end = __pa(init_mm.end_code - 1);
+- kernel_data.start = __pa(init_mm.end_code);
+- kernel_data.end = __pa(init_mm.brk - 1);
+-
+- for (region = mem_phys; region; region = region->next) {
+- struct resource *res;
+- unsigned long phys_start, phys_end;
+-
+- if (region->size == 0)
+- continue;
+-
+- phys_start = region->addr;
+- phys_end = phys_start + region->size - 1;
+-
+- res = alloc_bootmem_low(sizeof(*res));
+- res->name = "System RAM";
+- res->start = phys_start;
+- res->end = phys_end;
+- res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+-
+- request_resource (&iomem_resource, res);
++ ret = add_reserved_region(fbmem_start,
++ fbmem_start + fbmem_size - 1,
++ "Framebuffer");
++ if (ret) {
++ printk(KERN_WARNING
++ "Failed to reserve framebuffer memory\n");
++ fbmem_start = 0;
++ }
++ }
+
+- if (kernel_code.start >= res->start &&
+- kernel_code.end <= res->end)
+- request_resource (res, &kernel_code);
+- if (kernel_data.start >= res->start &&
+- kernel_data.end <= res->end)
+- request_resource (res, &kernel_data);
++ if (!fbmem_start) {
++ if ((fbmem_size & 0x000fffffUL) == 0)
++ align = 0x100000; /* 1 MiB */
++ else if ((fbmem_size & 0x0000ffffUL) == 0)
++ align = 0x10000; /* 64 KiB */
++ else
++ align = 0x1000; /* 4 KiB */
++
++ ret = alloc_reserved_region(&fbmem_start, fbmem_size,
++ align, "Framebuffer");
++ if (ret) {
++ printk(KERN_WARNING
++ "Failed to allocate framebuffer memory\n");
++ fbmem_size = 0;
++ }
+ }
++
++ return 0;
+ }
++early_param("fbmem", early_parse_fbmem);
+
+ static int __init parse_tag_core(struct tag *tag)
+ {
+@@ -157,11 +291,9 @@ static int __init parse_tag_core(struct tag *tag)
+ }
+ __tagtable(ATAG_CORE, parse_tag_core);
+
+-static int __init parse_tag_mem_range(struct tag *tag,
+- struct tag_mem_range **root)
++static int __init parse_tag_mem(struct tag *tag)
+ {
+- struct tag_mem_range *cur, **pprev;
+- struct tag_mem_range *new;
++ unsigned long start, end;
+
+ /*
+ * Ignore zero-sized entries. If we're running standalone, the
+@@ -171,34 +303,53 @@ static int __init parse_tag_mem_range(struct tag *tag,
+ if (tag->u.mem_range.size == 0)
+ return 0;
+
+- /*
+- * Copy the data so the bootmem init code doesn't need to care
+- * about it.
+- */
+- if (mem_range_next_free >= ARRAY_SIZE(mem_range_cache))
+- panic("Physical memory map too complex!\n");
++ start = tag->u.mem_range.addr;
++ end = tag->u.mem_range.addr + tag->u.mem_range.size - 1;
++
++ add_physical_memory(start, end);
++ return 0;
++}
++__tagtable(ATAG_MEM, parse_tag_mem);
++
++static int __init parse_tag_rdimg(struct tag *tag)
++{
++#ifdef CONFIG_INITRD
++ struct tag_mem_range *mem = &tag->u.mem_range;
++ int ret;
+
+- new = &mem_range_cache[mem_range_next_free++];
+- *new = tag->u.mem_range;
++ if (initrd_start) {
++ printk(KERN_WARNING
++ "Warning: Only the first initrd image will be used\n");
++ return 0;
++ }
+
+- pprev = root;
+- cur = *root;
+- while (cur) {
+- pprev = &cur->next;
+- cur = cur->next;
++ ret = add_reserved_region(mem->start, mem->start + mem->size - 1,
++ "initrd");
++ if (ret) {
++ printk(KERN_WARNING
++ "Warning: Failed to reserve initrd memory\n");
++ return ret;
+ }
+
+- *pprev = new;
+- new->next = NULL;
++ initrd_start = (unsigned long)__va(mem->addr);
++ initrd_end = initrd_start + mem->size;
++#else
++ printk(KERN_WARNING "RAM disk image present, but "
++ "no initrd support in kernel, ignoring\n");
++#endif
+
+ return 0;
+ }
++__tagtable(ATAG_RDIMG, parse_tag_rdimg);
+
+-static int __init parse_tag_mem(struct tag *tag)
++static int __init parse_tag_rsvd_mem(struct tag *tag)
+ {
+- return parse_tag_mem_range(tag, &mem_phys);
++ struct tag_mem_range *mem = &tag->u.mem_range;
++
++ return add_reserved_region(mem->addr, mem->addr + mem->size - 1,
++ "Reserved");
+ }
+-__tagtable(ATAG_MEM, parse_tag_mem);
++__tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem);
+
+ static int __init parse_tag_cmdline(struct tag *tag)
+ {
+@@ -207,12 +358,6 @@ static int __init parse_tag_cmdline(struct tag *tag)
+ }
+ __tagtable(ATAG_CMDLINE, parse_tag_cmdline);
+
+-static int __init parse_tag_rdimg(struct tag *tag)
+-{
+- return parse_tag_mem_range(tag, &mem_ramdisk);
+-}
+-__tagtable(ATAG_RDIMG, parse_tag_rdimg);
+-
+ static int __init parse_tag_clock(struct tag *tag)
+ {
+ /*
+@@ -223,12 +368,6 @@ static int __init parse_tag_clock(struct tag *tag)
+ }
+ __tagtable(ATAG_CLOCK, parse_tag_clock);
+
+-static int __init parse_tag_rsvd_mem(struct tag *tag)
+-{
+- return parse_tag_mem_range(tag, &mem_reserved);
+-}
+-__tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem);
+-
+ /*
+ * Scan the tag table for this tag, and call its parse function. The
+ * tag table is built by the linker from all the __tagtable
+@@ -260,10 +399,137 @@ static void __init parse_tags(struct tag *t)
+ t->hdr.tag);
+ }
+
++/*
++ * Find a free memory region large enough for storing the
++ * bootmem bitmap.
++ */
++static unsigned long __init
++find_bootmap_pfn(const struct resource *mem)
++{
++ unsigned long bootmap_pages, bootmap_len;
++ unsigned long node_pages = PFN_UP(mem->end - mem->start + 1);
++ unsigned long bootmap_start;
++
++ bootmap_pages = bootmem_bootmap_pages(node_pages);
++ bootmap_len = bootmap_pages << PAGE_SHIFT;
++
++ /*
++ * Find a large enough region without reserved pages for
++ * storing the bootmem bitmap. We can take advantage of the
++ * fact that all lists have been sorted.
++ *
++ * We have to check that we don't collide with any reserved
++ * regions, which includes the kernel image and any RAMDISK
++ * images.
++ */
++ bootmap_start = find_free_region(mem, bootmap_len, PAGE_SIZE);
++
++ return bootmap_start >> PAGE_SHIFT;
++}
++
++#define MAX_LOWMEM HIGHMEM_START
++#define MAX_LOWMEM_PFN PFN_DOWN(MAX_LOWMEM)
++
++static void __init setup_bootmem(void)
++{
++ unsigned bootmap_size;
++ unsigned long first_pfn, bootmap_pfn, pages;
++ unsigned long max_pfn, max_low_pfn;
++ unsigned node = 0;
++ struct resource *res;
++
++ printk(KERN_INFO "Physical memory:\n");
++ for (res = system_ram; res; res = res->sibling)
++ printk(" %08x-%08x\n", res->start, res->end);
++ printk(KERN_INFO "Reserved memory:\n");
++ for (res = reserved; res; res = res->sibling)
++ printk(" %08x-%08x: %s\n",
++ res->start, res->end, res->name);
++
++ nodes_clear(node_online_map);
++
++ if (system_ram->sibling)
++ printk(KERN_WARNING "Only using first memory bank\n");
++
++ for (res = system_ram; res; res = NULL) {
++ first_pfn = PFN_UP(res->start);
++ max_low_pfn = max_pfn = PFN_DOWN(res->end + 1);
++ bootmap_pfn = find_bootmap_pfn(res);
++ if (bootmap_pfn > max_pfn)
++ panic("No space for bootmem bitmap!\n");
++
++ if (max_low_pfn > MAX_LOWMEM_PFN) {
++ max_low_pfn = MAX_LOWMEM_PFN;
++#ifndef CONFIG_HIGHMEM
++ /*
++ * Lowmem is memory that can be addressed
++ * directly through P1/P2
++ */
++ printk(KERN_WARNING
++ "Node %u: Only %ld MiB of memory will be used.\n",
++ node, MAX_LOWMEM >> 20);
++ printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
++#else
++#error HIGHMEM is not supported by AVR32 yet
++#endif
++ }
++
++ /* Initialize the boot-time allocator with low memory only. */
++ bootmap_size = init_bootmem_node(NODE_DATA(node), bootmap_pfn,
++ first_pfn, max_low_pfn);
++
++ /*
++ * Register fully available RAM pages with the bootmem
++ * allocator.
++ */
++ pages = max_low_pfn - first_pfn;
++ free_bootmem_node (NODE_DATA(node), PFN_PHYS(first_pfn),
++ PFN_PHYS(pages));
++
++ /* Reserve space for the bootmem bitmap... */
++ reserve_bootmem_node(NODE_DATA(node),
++ PFN_PHYS(bootmap_pfn),
++ bootmap_size);
++
++ /* ...and any other reserved regions. */
++ for (res = reserved; res; res = res->sibling) {
++ if (res->start > PFN_PHYS(max_pfn))
++ break;
++
++ /*
++ * resource_init will complain about partial
++ * overlaps, so we'll just ignore such
++ * resources for now.
++ */
++ if (res->start >= PFN_PHYS(first_pfn)
++ && res->end < PFN_PHYS(max_pfn))
++ reserve_bootmem_node(
++ NODE_DATA(node), res->start,
++ res->end - res->start + 1);
++ }
++
++ node_set_online(node);
++ }
++}
++
+ void __init setup_arch (char **cmdline_p)
+ {
+ struct clk *cpu_clk;
+
++ init_mm.start_code = (unsigned long)_text;
++ init_mm.end_code = (unsigned long)_etext;
++ init_mm.end_data = (unsigned long)_edata;
++ init_mm.brk = (unsigned long)_end;
++
++ /*
++ * Include .init section to make allocations easier. It will
++ * be removed before the resource is actually requested.
++ */
++ kernel_code.start = __pa(__init_begin);
++ kernel_code.end = __pa(init_mm.end_code - 1);
++ kernel_data.start = __pa(init_mm.end_code);
++ kernel_data.end = __pa(init_mm.brk - 1);
++
+ parse_tags(bootloader_tags);
+
+ setup_processor();
+@@ -289,24 +555,16 @@ void __init setup_arch (char **cmdline_p)
+ ((cpu_hz + 500) / 1000) % 1000);
+ }
+
+- init_mm.start_code = (unsigned long) &_text;
+- init_mm.end_code = (unsigned long) &_etext;
+- init_mm.end_data = (unsigned long) &_edata;
+- init_mm.brk = (unsigned long) &_end;
+-
+ strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
+ *cmdline_p = command_line;
+ parse_early_param();
+
+ setup_bootmem();
+
+- board_setup_fbmem(fbmem_start, fbmem_size);
+-
+ #ifdef CONFIG_VT
+ conswitchp = &dummy_con;
+ #endif
+
+ paging_init();
+-
+ resource_init();
+ }
+diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
+index c10833f..7014a35 100644
+--- a/arch/avr32/kernel/time.c
++++ b/arch/avr32/kernel/time.c
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright (C) 2004-2006 Atmel Corporation
++ * Copyright (C) 2004-2007 Atmel Corporation
+ *
+ * Based on MIPS implementation arch/mips/kernel/time.c
+ * Copyright 2001 MontaVista Software Inc.
+@@ -20,18 +20,25 @@
+ #include <linux/init.h>
+ #include <linux/profile.h>
+ #include <linux/sysdev.h>
++#include <linux/err.h>
+
+ #include <asm/div64.h>
+ #include <asm/sysreg.h>
+ #include <asm/io.h>
+ #include <asm/sections.h>
+
+-static cycle_t read_cycle_count(void)
++/* how many counter cycles in a jiffy? */
++static u32 cycles_per_jiffy;
++
++/* the count value for the next timer interrupt */
++static u32 expirelo;
++
++cycle_t __weak read_cycle_count(void)
+ {
+ return (cycle_t)sysreg_read(COUNT);
+ }
+
+-static struct clocksource clocksource_avr32 = {
++struct clocksource __weak clocksource_avr32 = {
+ .name = "avr32",
+ .rating = 350,
+ .read = read_cycle_count,
+@@ -40,12 +47,20 @@ static struct clocksource clocksource_avr32 = {
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ };
+
++irqreturn_t __weak timer_interrupt(int irq, void *dev_id);
++
++struct irqaction timer_irqaction = {
++ .handler = timer_interrupt,
++ .flags = IRQF_DISABLED,
++ .name = "timer",
++};
++
+ /*
+ * By default we provide the null RTC ops
+ */
+ static unsigned long null_rtc_get_time(void)
+ {
+- return mktime(2004, 1, 1, 0, 0, 0);
++ return mktime(2007, 1, 1, 0, 0, 0);
+ }
+
+ static int null_rtc_set_time(unsigned long sec)
+@@ -56,23 +71,14 @@ static int null_rtc_set_time(unsigned long sec)
+ static unsigned long (*rtc_get_time)(void) = null_rtc_get_time;
+ static int (*rtc_set_time)(unsigned long) = null_rtc_set_time;
+
+-/* how many counter cycles in a jiffy? */
+-static unsigned long cycles_per_jiffy;
+-
+-/* cycle counter value at the previous timer interrupt */
+-static unsigned int timerhi, timerlo;
+-
+-/* the count value for the next timer interrupt */
+-static unsigned int expirelo;
+-
+ static void avr32_timer_ack(void)
+ {
+- unsigned int count;
++ u32 count;
+
+ /* Ack this timer interrupt and set the next one */
+ expirelo += cycles_per_jiffy;
++ /* setting COMPARE to 0 stops the COUNT-COMPARE */
+ if (expirelo == 0) {
+- printk(KERN_DEBUG "expirelo == 0\n");
+ sysreg_write(COMPARE, expirelo + 1);
+ } else {
+ sysreg_write(COMPARE, expirelo);
+@@ -86,27 +92,56 @@ static void avr32_timer_ack(void)
+ }
+ }
+
+-static unsigned int avr32_hpt_read(void)
++int __weak avr32_hpt_init(void)
+ {
+- return sysreg_read(COUNT);
++ int ret;
++ unsigned long mult, shift, count_hz;
++
++ count_hz = clk_get_rate(boot_cpu_data.clk);
++ shift = clocksource_avr32.shift;
++ mult = clocksource_hz2mult(count_hz, shift);
++ clocksource_avr32.mult = mult;
++
++ {
++ u64 tmp;
++
++ tmp = TICK_NSEC;
++ tmp <<= shift;
++ tmp += mult / 2;
++ do_div(tmp, mult);
++
++ cycles_per_jiffy = tmp;
++ }
++
++ ret = setup_irq(0, &timer_irqaction);
++ if (ret) {
++ pr_debug("timer: could not request IRQ 0: %d\n", ret);
++ return -ENODEV;
++ }
++
++ printk(KERN_INFO "timer: AT32AP COUNT-COMPARE at irq 0, "
++ "%lu.%03lu MHz\n",
++ ((count_hz + 500) / 1000) / 1000,
++ ((count_hz + 500) / 1000) % 1000);
++
++ return 0;
+ }
+
+ /*
+ * Taken from MIPS c0_hpt_timer_init().
+ *
+- * Why is it so complicated, and what is "count"? My assumption is
+- * that `count' specifies the "reference cycle", i.e. the cycle since
+- * reset that should mean "zero". The reason COUNT is written twice is
+- * probably to make sure we don't get any timer interrupts while we
+- * are messing with the counter.
++ * The reason COUNT is written twice is probably to make sure we don't get any
++ * timer interrupts while we are messing with the counter.
+ */
+-static void avr32_hpt_init(unsigned int count)
++int __weak avr32_hpt_start(void)
+ {
+- count = sysreg_read(COUNT) - count;
++ u32 count = sysreg_read(COUNT);
+ expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
+ sysreg_write(COUNT, expirelo - cycles_per_jiffy);
+ sysreg_write(COMPARE, expirelo);
+ sysreg_write(COUNT, count);
++
++ return 0;
+ }
+
+ /*
+@@ -115,26 +150,18 @@ static void avr32_hpt_init(unsigned int count)
+ *
+ * In UP mode, it is invoked from the (global) timer_interrupt.
+ */
+-static void local_timer_interrupt(int irq, void *dev_id)
++void local_timer_interrupt(int irq, void *dev_id)
+ {
+ if (current->pid)
+ profile_tick(CPU_PROFILING);
+ update_process_times(user_mode(get_irq_regs()));
+ }
+
+-static irqreturn_t
+-timer_interrupt(int irq, void *dev_id)
++irqreturn_t __weak timer_interrupt(int irq, void *dev_id)
+ {
+- unsigned int count;
+-
+ /* ack timer interrupt and try to set next interrupt */
+- count = avr32_hpt_read();
+ avr32_timer_ack();
+
+- /* Update timerhi/timerlo for intra-jiffy calibration */
+- timerhi += count < timerlo; /* Wrap around */
+- timerlo = count;
+-
+ /*
+ * Call the generic timer interrupt handler
+ */
+@@ -153,60 +180,37 @@ timer_interrupt(int irq, void *dev_id)
+ return IRQ_HANDLED;
+ }
+
+-static struct irqaction timer_irqaction = {
+- .handler = timer_interrupt,
+- .flags = IRQF_DISABLED,
+- .name = "timer",
+-};
+-
+ void __init time_init(void)
+ {
+- unsigned long mult, shift, count_hz;
+ int ret;
+
++ /*
++ * Make sure we don't get any COMPARE interrupts before we can
++ * handle them.
++ */
++ sysreg_write(COMPARE, 0);
++
+ xtime.tv_sec = rtc_get_time();
+ xtime.tv_nsec = 0;
+
+ set_normalized_timespec(&wall_to_monotonic,
+ -xtime.tv_sec, -xtime.tv_nsec);
+
+- printk("Before time_init: count=%08lx, compare=%08lx\n",
+- (unsigned long)sysreg_read(COUNT),
+- (unsigned long)sysreg_read(COMPARE));
+-
+- count_hz = clk_get_rate(boot_cpu_data.clk);
+- shift = clocksource_avr32.shift;
+- mult = clocksource_hz2mult(count_hz, shift);
+- clocksource_avr32.mult = mult;
+-
+- printk("Cycle counter: mult=%lu, shift=%lu\n", mult, shift);
+-
+- {
+- u64 tmp;
+-
+- tmp = TICK_NSEC;
+- tmp <<= shift;
+- tmp += mult / 2;
+- do_div(tmp, mult);
+-
+- cycles_per_jiffy = tmp;
++ ret = avr32_hpt_init();
++ if (ret) {
++ pr_debug("timer: failed setup: %d\n", ret);
++ return;
+ }
+
+- /* This sets up the high precision timer for the first interrupt. */
+- avr32_hpt_init(avr32_hpt_read());
+-
+- printk("After time_init: count=%08lx, compare=%08lx\n",
+- (unsigned long)sysreg_read(COUNT),
+- (unsigned long)sysreg_read(COMPARE));
+-
+ ret = clocksource_register(&clocksource_avr32);
+ if (ret)
+- printk(KERN_ERR
+- "timer: could not register clocksource: %d\n", ret);
++ pr_debug("timer: could not register clocksource: %d\n", ret);
+
+- ret = setup_irq(0, &timer_irqaction);
+- if (ret)
+- printk("timer: could not request IRQ 0: %d\n", ret);
++ ret = avr32_hpt_start();
++ if (ret) {
++ pr_debug("timer: failed starting: %d\n", ret);
++ return;
++ }
+ }
+
+ static struct sysdev_class timer_class = {
+diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
+index adc01a1..4d7ae14 100644
+--- a/arch/avr32/kernel/traps.c
++++ b/arch/avr32/kernel/traps.c
+@@ -5,158 +5,25 @@
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+-#undef DEBUG
+-#include <linux/sched.h>
++
++#include <linux/bug.h>
+ #include <linux/init.h>
+-#include <linux/module.h>
+ #include <linux/kallsyms.h>
++#include <linux/module.h>
+ #include <linux/notifier.h>
++#include <linux/sched.h>
++#include <linux/uaccess.h>
+
+-#include <asm/traps.h>
+-#include <asm/sysreg.h>
+ #include <asm/addrspace.h>
+-#include <asm/ocd.h>
+ #include <asm/mmu_context.h>
+-#include <asm/uaccess.h>
+-
+-static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
+-{
+- unsigned long p;
+- int i;
+-
+- printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
+-
+- for (p = bottom & ~31; p < top; ) {
+- printk("%04lx: ", p & 0xffff);
+-
+- for (i = 0; i < 8; i++, p += 4) {
+- unsigned int val;
+-
+- if (p < bottom || p >= top)
+- printk(" ");
+- else {
+- if (__get_user(val, (unsigned int __user *)p)) {
+- printk("\n");
+- goto out;
+- }
+- printk("%08x ", val);
+- }
+- }
+- printk("\n");
+- }
+-
+-out:
+- return;
+-}
+-
+-static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p)
+-{
+- return (p > (unsigned long)tinfo)
+- && (p < (unsigned long)tinfo + THREAD_SIZE - 3);
+-}
+-
+-#ifdef CONFIG_FRAME_POINTER
+-static inline void __show_trace(struct task_struct *tsk, unsigned long *sp,
+- struct pt_regs *regs)
+-{
+- unsigned long lr, fp;
+- struct thread_info *tinfo;
+-
+- tinfo = (struct thread_info *)
+- ((unsigned long)sp & ~(THREAD_SIZE - 1));
+-
+- if (regs)
+- fp = regs->r7;
+- else if (tsk == current)
+- asm("mov %0, r7" : "=r"(fp));
+- else
+- fp = tsk->thread.cpu_context.r7;
+-
+- /*
+- * Walk the stack as long as the frame pointer (a) is within
+- * the kernel stack of the task, and (b) it doesn't move
+- * downwards.
+- */
+- while (valid_stack_ptr(tinfo, fp)) {
+- unsigned long new_fp;
+-
+- lr = *(unsigned long *)fp;
+- printk(" [<%08lx>] ", lr);
+- print_symbol("%s\n", lr);
+-
+- new_fp = *(unsigned long *)(fp + 4);
+- if (new_fp <= fp)
+- break;
+- fp = new_fp;
+- }
+- printk("\n");
+-}
+-#else
+-static inline void __show_trace(struct task_struct *tsk, unsigned long *sp,
+- struct pt_regs *regs)
+-{
+- unsigned long addr;
+-
+- while (!kstack_end(sp)) {
+- addr = *sp++;
+- if (kernel_text_address(addr)) {
+- printk(" [<%08lx>] ", addr);
+- print_symbol("%s\n", addr);
+- }
+- }
+-}
+-#endif
+-
+-void show_trace(struct task_struct *tsk, unsigned long *sp,
+- struct pt_regs *regs)
+-{
+- if (regs &&
+- (((regs->sr & MODE_MASK) == MODE_EXCEPTION) ||
+- ((regs->sr & MODE_MASK) == MODE_USER)))
+- return;
+-
+- printk ("Call trace:");
+-#ifdef CONFIG_KALLSYMS
+- printk("\n");
+-#endif
+-
+- __show_trace(tsk, sp, regs);
+- printk("\n");
+-}
+-
+-void show_stack(struct task_struct *tsk, unsigned long *sp)
+-{
+- unsigned long stack;
+-
+- if (!tsk)
+- tsk = current;
+- if (sp == 0) {
+- if (tsk == current) {
+- register unsigned long *real_sp __asm__("sp");
+- sp = real_sp;
+- } else {
+- sp = (unsigned long *)tsk->thread.cpu_context.ksp;
+- }
+- }
+-
+- stack = (unsigned long)sp;
+- dump_mem("Stack: ", stack,
+- THREAD_SIZE + (unsigned long)tsk->thread_info);
+- show_trace(tsk, sp, NULL);
+-}
+-
+-void dump_stack(void)
+-{
+- show_stack(NULL, NULL);
+-}
+-EXPORT_SYMBOL(dump_stack);
++#include <asm/ocd.h>
++#include <asm/sysreg.h>
++#include <asm/traps.h>
+
+ ATOMIC_NOTIFIER_HEAD(avr32_die_chain);
+
+ int register_die_notifier(struct notifier_block *nb)
+ {
+- pr_debug("register_die_notifier: %p\n", nb);
+-
+ return atomic_notifier_chain_register(&avr32_die_chain, nb);
+ }
+ EXPORT_SYMBOL(register_die_notifier);
+@@ -169,98 +36,108 @@ EXPORT_SYMBOL(unregister_die_notifier);
+
+ static DEFINE_SPINLOCK(die_lock);
+
+-void __die(const char *str, struct pt_regs *regs, unsigned long err,
+- const char *file, const char *func, unsigned long line)
++void NORET_TYPE die(const char *str, struct pt_regs *regs, long err)
+ {
+- struct task_struct *tsk = current;
+ static int die_counter;
+
+ console_verbose();
+ spin_lock_irq(&die_lock);
+ bust_spinlocks(1);
+
+- printk(KERN_ALERT "%s", str);
+- if (file && func)
+- printk(" in %s:%s, line %ld", file, func, line);
+- printk("[#%d]:\n", ++die_counter);
+- print_modules();
+- show_regs(regs);
+- printk("Process %s (pid: %d, stack limit = 0x%p)\n",
+- tsk->comm, tsk->pid, tsk->thread_info + 1);
+-
+- if (!user_mode(regs) || in_interrupt()) {
+- dump_mem("Stack: ", regs->sp,
+- THREAD_SIZE + (unsigned long)tsk->thread_info);
++ printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG,
++ str, err, ++die_counter);
++#ifdef CONFIG_PREEMPT
++ printk("PREEMPT ");
++#endif
++#ifdef CONFIG_FRAME_POINTER
++ printk("FRAME_POINTER ");
++#endif
++ if (current_cpu_data.features & AVR32_FEATURE_OCD) {
++ unsigned long did = __mfdr(DBGREG_DID);
++ printk("chip: 0x%03lx:0x%04lx rev %lu\n",
++ (did >> 1) & 0x7ff,
++ (did >> 12) & 0x7fff,
++ (did >> 28) & 0xf);
++ } else {
++ printk("cpu: arch %u r%u / core %u r%u\n",
++ current_cpu_data.arch_type,
++ current_cpu_data.arch_revision,
++ current_cpu_data.cpu_type,
++ current_cpu_data.cpu_revision);
+ }
+
++ print_modules();
++ show_regs_log_lvl(regs, KERN_EMERG);
++ show_stack_log_lvl(current, regs->sp, regs, KERN_EMERG);
+ bust_spinlocks(0);
+ spin_unlock_irq(&die_lock);
+- do_exit(SIGSEGV);
++
++ if (in_interrupt())
++ panic("Fatal exception in interrupt");
++
++ if (panic_on_oops)
++ panic("Fatal exception");
++
++ do_exit(err);
+ }
+
+-void __die_if_kernel(const char *str, struct pt_regs *regs, unsigned long err,
+- const char *file, const char *func, unsigned long line)
++void _exception(long signr, struct pt_regs *regs, int code,
++ unsigned long addr)
+ {
++ siginfo_t info;
++
+ if (!user_mode(regs))
+- __die(str, regs, err, file, func, line);
+-}
++ die("Unhandled exception in kernel mode", regs, signr);
++
++ memset(&info, 0, sizeof(info));
++ info.si_signo = signr;
++ info.si_code = code;
++ info.si_addr = (void __user *)addr;
++ force_sig_info(signr, &info, current);
+
+-asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
+-{
+-#ifdef CONFIG_SUBARCH_AVR32B
+ /*
+- * The exception entry always saves RSR_EX. For NMI, this is
+- * wrong; it should be RSR_NMI
++ * Init gets no signals that it doesn't have a handler for.
++ * That's all very well, but if it has caused a synchronous
++ * exception and we ignore the resulting signal, it will just
++ * generate the same exception over and over again and we get
++ * nowhere. Better to kill it and let the kernel panic.
+ */
+- regs->sr = sysreg_read(RSR_NMI);
+-#endif
++ if (is_init(current)) {
++ __sighandler_t handler;
++
++ spin_lock_irq(&current->sighand->siglock);
++ handler = current->sighand->action[signr-1].sa.sa_handler;
++ spin_unlock_irq(&current->sighand->siglock);
++ if (handler == SIG_DFL) {
++ /* init has generated a synchronous exception
++ and it doesn't have a handler for the signal */
++ printk(KERN_CRIT "init has generated signal %ld "
++ "but has no handler for it\n", signr);
++ do_exit(signr);
++ }
++ }
++}
+
+- printk("NMI taken!!!!\n");
+- die("NMI", regs, ecr);
+- BUG();
++asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
++{
++ printk(KERN_ALERT "Got Non-Maskable Interrupt, dumping regs\n");
++ show_regs_log_lvl(regs, KERN_ALERT);
++ show_stack_log_lvl(current, regs->sp, regs, KERN_ALERT);
+ }
+
+ asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
+ {
+- printk("Unable to handle critical exception %lu at pc = %08lx!\n",
+- ecr, regs->pc);
+- die("Oops", regs, ecr);
+- BUG();
++ die("Critical exception", regs, SIGKILL);
+ }
+
+ asmlinkage void do_address_exception(unsigned long ecr, struct pt_regs *regs)
+ {
+- siginfo_t info;
+-
+- die_if_kernel("Oops: Address exception in kernel mode", regs, ecr);
+-
+-#ifdef DEBUG
+- if (ecr == ECR_ADDR_ALIGN_X)
+- pr_debug("Instruction Address Exception at pc = %08lx\n",
+- regs->pc);
+- else if (ecr == ECR_ADDR_ALIGN_R)
+- pr_debug("Data Address Exception (Read) at pc = %08lx\n",
+- regs->pc);
+- else if (ecr == ECR_ADDR_ALIGN_W)
+- pr_debug("Data Address Exception (Write) at pc = %08lx\n",
+- regs->pc);
+- else
+- BUG();
+-
+- show_regs(regs);
+-#endif
+-
+- info.si_signo = SIGBUS;
+- info.si_errno = 0;
+- info.si_code = BUS_ADRALN;
+- info.si_addr = (void __user *)regs->pc;
+-
+- force_sig_info(SIGBUS, &info, current);
++ _exception(SIGBUS, regs, BUS_ADRALN, regs->pc);
+ }
+
+ /* This way of handling undefined instructions is stolen from ARM */
+ static LIST_HEAD(undef_hook);
+-static spinlock_t undef_lock = SPIN_LOCK_UNLOCKED;
++static DEFINE_SPINLOCK(undef_lock);
+
+ void register_undef_hook(struct undef_hook *hook)
+ {
+@@ -280,7 +157,8 @@ static int do_cop_absent(u32 insn)
+ {
+ int cop_nr;
+ u32 cpucr;
+- if ( (insn & 0xfdf00000) == 0xf1900000 )
++
++ if ((insn & 0xfdf00000) == 0xf1900000)
+ /* LDC0 */
+ cop_nr = 0;
+ else
+@@ -292,136 +170,91 @@ static int do_cop_absent(u32 insn)
+ sysreg_write(CPUCR, cpucr);
+
+ cpucr = sysreg_read(CPUCR);
+- if ( !(cpucr & (1 << (24 + cop_nr))) ){
+- printk("Coprocessor #%i not found!\n", cop_nr);
+- return -1;
+- }
++ if (!(cpucr & (1 << (24 + cop_nr))))
++ return -ENODEV;
+
+ return 0;
+ }
+
+-#ifdef CONFIG_BUG
+-#ifdef CONFIG_DEBUG_BUGVERBOSE
+-static inline void do_bug_verbose(struct pt_regs *regs, u32 insn)
+-{
+- char *file;
+- u16 line;
+- char c;
+-
+- if (__get_user(line, (u16 __user *)(regs->pc + 2)))
+- return;
+- if (__get_user(file, (char * __user *)(regs->pc + 4))
+- || (unsigned long)file < PAGE_OFFSET
+- || __get_user(c, file))
+- file = "<bad filename>";
+-
+- printk(KERN_ALERT "kernel BUG at %s:%d!\n", file, line);
+-}
+-#else
+-static inline void do_bug_verbose(struct pt_regs *regs, u32 insn)
++int is_valid_bugaddr(unsigned long pc)
+ {
++ unsigned short opcode;
++
++ if (pc < PAGE_OFFSET)
++ return 0;
++ if (probe_kernel_address((u16 *)pc, opcode))
++ return 0;
+
++ return opcode == AVR32_BUG_OPCODE;
+ }
+-#endif
+-#endif
+
+ asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs)
+ {
+ u32 insn;
+ struct undef_hook *hook;
+- siginfo_t info;
+ void __user *pc;
++ long code;
+
+- if (!user_mode(regs))
+- goto kernel_trap;
++ if (!user_mode(regs) && (ecr == ECR_ILLEGAL_OPCODE)) {
++ enum bug_trap_type type;
++
++ type = report_bug(regs->pc);
++ switch (type) {
++ case BUG_TRAP_TYPE_NONE:
++ break;
++ case BUG_TRAP_TYPE_WARN:
++ regs->pc += 2;
++ return;
++ case BUG_TRAP_TYPE_BUG:
++ die("Kernel BUG", regs, SIGKILL);
++ }
++ }
+
+ local_irq_enable();
+
+- pc = (void __user *)instruction_pointer(regs);
+- if (__get_user(insn, (u32 __user *)pc))
+- goto invalid_area;
++ if (user_mode(regs)) {
++ pc = (void __user *)instruction_pointer(regs);
++ if (get_user(insn, (u32 __user *)pc))
++ goto invalid_area;
+
+- if (ecr == ECR_COPROC_ABSENT) {
+- if (do_cop_absent(insn) == 0)
++ if (ecr == ECR_COPROC_ABSENT && !do_cop_absent(insn))
+ return;
+- }
+
+- spin_lock_irq(&undef_lock);
+- list_for_each_entry(hook, &undef_hook, node) {
+- if ((insn & hook->insn_mask) == hook->insn_val) {
+- if (hook->fn(regs, insn) == 0) {
+- spin_unlock_irq(&undef_lock);
+- return;
++ spin_lock_irq(&undef_lock);
++ list_for_each_entry(hook, &undef_hook, node) {
++ if ((insn & hook->insn_mask) == hook->insn_val) {
++ if (hook->fn(regs, insn) == 0) {
++ spin_unlock_irq(&undef_lock);
++ return;
++ }
+ }
+ }
++ spin_unlock_irq(&undef_lock);
+ }
+- spin_unlock_irq(&undef_lock);
+-
+-invalid_area:
+
+-#ifdef DEBUG
+- printk("Illegal instruction at pc = %08lx\n", regs->pc);
+- if (regs->pc < TASK_SIZE) {
+- unsigned long ptbr, pgd, pte, *p;
+-
+- ptbr = sysreg_read(PTBR);
+- p = (unsigned long *)ptbr;
+- pgd = p[regs->pc >> 22];
+- p = (unsigned long *)((pgd & 0x1ffff000) | 0x80000000);
+- pte = p[(regs->pc >> 12) & 0x3ff];
+- printk("page table: 0x%08lx -> 0x%08lx -> 0x%08lx\n", ptbr, pgd, pte);
+- }
+-#endif
+-
+- info.si_signo = SIGILL;
+- info.si_errno = 0;
+- info.si_addr = (void __user *)regs->pc;
+ switch (ecr) {
+- case ECR_ILLEGAL_OPCODE:
+- case ECR_UNIMPL_INSTRUCTION:
+- info.si_code = ILL_ILLOPC;
+- break;
+ case ECR_PRIVILEGE_VIOLATION:
+- info.si_code = ILL_PRVOPC;
++ code = ILL_PRVOPC;
+ break;
+ case ECR_COPROC_ABSENT:
+- info.si_code = ILL_COPROC;
++ code = ILL_COPROC;
+ break;
+ default:
+- BUG();
++ code = ILL_ILLOPC;
++ break;
+ }
+
+- force_sig_info(SIGILL, &info, current);
++ _exception(SIGILL, regs, code, regs->pc);
+ return;
+
+-kernel_trap:
+-#ifdef CONFIG_BUG
+- if (__kernel_text_address(instruction_pointer(regs))) {
+- insn = *(u16 *)instruction_pointer(regs);
+- if (insn == AVR32_BUG_OPCODE) {
+- do_bug_verbose(regs, insn);
+- die("Kernel BUG", regs, 0);
+- return;
+- }
+- }
+-#endif
+-
+- die("Oops: Illegal instruction in kernel code", regs, ecr);
++invalid_area:
++ _exception(SIGSEGV, regs, SEGV_MAPERR, regs->pc);
+ }
+
+ asmlinkage void do_fpe(unsigned long ecr, struct pt_regs *regs)
+ {
+- siginfo_t info;
+-
+- printk("Floating-point exception at pc = %08lx\n", regs->pc);
+-
+- /* We have no FPU... */
+- info.si_signo = SIGILL;
+- info.si_errno = 0;
+- info.si_addr = (void __user *)regs->pc;
+- info.si_code = ILL_COPROC;
+-
+- force_sig_info(SIGILL, &info, current);
++ /* We have no FPU yet */
++ _exception(SIGILL, regs, ILL_COPROC, regs->pc);
+ }
+
+
+diff --git a/arch/avr32/kernel/vmlinux.lds.c b/arch/avr32/kernel/vmlinux.lds.c
+index ef13b7c..e7f72c9 100644
+--- a/arch/avr32/kernel/vmlinux.lds.c
++++ b/arch/avr32/kernel/vmlinux.lds.c
+@@ -26,10 +26,16 @@ SECTIONS
+ _sinittext = .;
+ *(.text.reset)
+ *(.init.text)
++ /*
++ * .exit.text is discarded at runtime, not
++ * link time, to deal with references from
++ * __bug_table
++ */
++ *(.exit.text)
+ _einittext = .;
+ . = ALIGN(4);
+ __tagtable_begin = .;
+- *(.taglist)
++ *(.taglist.init)
+ __tagtable_end = .;
+ *(.init.data)
+ . = ALIGN(16);
+@@ -86,6 +92,8 @@ SECTIONS
+ __stop___ex_table = .;
+ }
+
++ BUG_TABLE
++
+ RODATA
+
+ . = ALIGN(8192);
+@@ -126,7 +134,6 @@ SECTIONS
+ * thrown away, as cleanup code is never called unless it's a module.
+ */
+ /DISCARD/ : {
+- *(.exit.text)
+ *(.exit.data)
+ *(.exitcall.exit)
+ }
+diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig
+new file mode 100644
+index 0000000..eb30783
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/Kconfig
+@@ -0,0 +1,31 @@
++if PLATFORM_AT32AP
++
++menu "Atmel AVR32 AP options"
++
++choice
++ prompt "AT32AP7000 static memory bus width"
++ depends on CPU_AT32AP7000
++ default AP7000_16_BIT_SMC
++ help
++ Define the width of the AP7000 external static memory interface.
++ This is used to determine how to mangle the address and/or data
++ when doing little-endian port access.
++
++ The current code can only support a single external memory bus
++ width for all chip selects, excluding the flash (which is using
++ raw access and is thus not affected by any of this.)
++
++config AP7000_32_BIT_SMC
++ bool "32 bit"
++
++config AP7000_16_BIT_SMC
++ bool "16 bit"
++
++config AP7000_8_BIT_SMC
++ bool "8 bit"
++
++endchoice
++
++endmenu
++
++endif # PLATFORM_AT32AP
+diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
+index b21bea9..f1d3957 100644
+--- a/arch/avr32/mach-at32ap/Makefile
++++ b/arch/avr32/mach-at32ap/Makefile
+@@ -1,2 +1,3 @@
+ obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
+ obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o
++obj-$(CONFIG_CPU_AT32AP7000) += time-tc.o
+diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
+index 472703f..028883f 100644
+--- a/arch/avr32/mach-at32ap/at32ap7000.c
++++ b/arch/avr32/mach-at32ap/at32ap7000.c
+@@ -6,6 +6,7 @@
+ * published by the Free Software Foundation.
+ */
+ #include <linux/clk.h>
++#include <linux/fb.h>
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/spi/spi.h>
+@@ -17,7 +18,10 @@
+ #include <asm/arch/portmux.h>
+ #include <asm/arch/sm.h>
+
++#include <video/atmel_lcdc.h>
++
+ #include "clock.h"
++#include "hmatrix.h"
+ #include "pio.h"
+ #include "sm.h"
+
+@@ -407,8 +411,6 @@ static void __init genclk_init_parent(struct clk *clk)
+ static struct resource sm_resource[] = {
+ PBMEM(0xfff00000),
+ NAMED_IRQ(19, "eim"),
+- NAMED_IRQ(20, "pm"),
+- NAMED_IRQ(21, "rtc"),
+ };
+ struct platform_device at32_sm_device = {
+ .name = "sm",
+@@ -416,7 +418,55 @@ struct platform_device at32_sm_device = {
+ .resource = sm_resource,
+ .num_resources = ARRAY_SIZE(sm_resource),
+ };
+-DEV_CLK(pclk, at32_sm, pbb, 0);
++static struct clk at32_sm_pclk = {
++ .name = "pclk",
++ .dev = &at32_sm_device.dev,
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .users = 1,
++ .index = 0,
++};
++
++static struct resource pm_resource[] = {
++ PBMEM(0xfff00000),
++ IRQ(20),
++};
++struct platform_device at32_pm_device = {
++ .name = "pm",
++ .id = 0,
++ .resource = pm_resource,
++ .num_resources = ARRAY_SIZE(pm_resource),
++};
++
++static struct resource rtc_resource[] = {
++ {
++ .start = 0xfff00080,
++ .end = 0xfff000a3,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(21),
++};
++struct platform_device at32_rtc_device = {
++ .name = "rtc",
++ .id = 0,
++ .resource = rtc_resource,
++ .num_resources = ARRAY_SIZE(rtc_resource),
++};
++
++static struct resource wdt_resource[] = {
++ {
++ .start = 0xfff000b0,
++ .end = 0xfff000b7,
++ .flags = IORESOURCE_MEM,
++ },
++};
++struct platform_device at32_wdt_device = {
++ .name = "wdt",
++ .id = 0,
++ .resource = wdt_resource,
++ .num_resources = ARRAY_SIZE(wdt_resource),
++};
+
+ static struct resource intc0_resource[] = {
+ PBMEM(0xfff00400),
+@@ -442,6 +492,7 @@ static struct clk hramc_clk = {
+ .mode = hsb_clk_mode,
+ .get_rate = hsb_clk_get_rate,
+ .users = 1,
++ .index = 3,
+ };
+
+ static struct resource smc0_resource[] = {
+@@ -466,6 +517,68 @@ static struct clk pico_clk = {
+ .users = 1,
+ };
+
++static struct resource dmaca0_resource[] = {
++ {
++ .start = 0xff200000,
++ .end = 0xff20ffff,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(2),
++};
++DEFINE_DEV(dmaca, 0);
++DEV_CLK(hclk, dmaca0, hsb, 10);
++
++/* --------------------------------------------------------------------
++ * HMATRIX
++ * -------------------------------------------------------------------- */
++
++static struct clk hmatrix_clk = {
++ .name = "hmatrix_clk",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 2,
++ .users = 1,
++};
++#define HMATRIX_BASE ((void __iomem *)0xfff00800)
++
++#define hmatrix_readl(reg) \
++ __raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
++#define hmatrix_writel(reg,value) \
++ __raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
++
++/*
++ * Set bits in the HMATRIX Special Function Register (SFR) used by the
++ * External Bus Interface (EBI). This can be used to enable special
++ * features like CompactFlash support, NAND Flash support, etc. on
++ * certain chipselects.
++ */
++static inline void set_ebi_sfr_bits(u32 mask)
++{
++ u32 sfr;
++
++ clk_enable(&hmatrix_clk);
++ sfr = hmatrix_readl(SFR4);
++ sfr |= mask;
++ hmatrix_writel(SFR4, sfr);
++ clk_disable(&hmatrix_clk);
++}
++
++/* --------------------------------------------------------------------
++ * System Timer/Counter (TC)
++ * -------------------------------------------------------------------- */
++static struct resource at32_systc0_resource[] = {
++ PBMEM(0xfff00c00),
++ IRQ(22),
++};
++struct platform_device at32_systc0_device = {
++ .name = "systc",
++ .id = 0,
++ .resource = at32_systc0_resource,
++ .num_resources = ARRAY_SIZE(at32_systc0_resource),
++};
++DEV_CLK(pclk, at32_systc0, pbb, 3);
++
+ /* --------------------------------------------------------------------
+ * PIO
+ * -------------------------------------------------------------------- */
+@@ -510,9 +623,15 @@ void __init at32_add_system_devices(void)
+ system_manager.eim_first_irq = EIM_IRQ_BASE;
+
+ platform_device_register(&at32_sm_device);
++ platform_device_register(&at32_pm_device);
++ platform_device_register(&at32_rtc_device);
++ platform_device_register(&at32_wdt_device);
+ platform_device_register(&at32_intc0_device);
+ platform_device_register(&smc0_device);
+ platform_device_register(&pdc_device);
++ platform_device_register(&dmaca0_device);
++
++ platform_device_register(&at32_systc0_device);
+
+ platform_device_register(&pio0_device);
+ platform_device_register(&pio1_device);
+@@ -816,22 +935,105 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+ }
+
+ /* --------------------------------------------------------------------
++ * TWI
++ * -------------------------------------------------------------------- */
++
++static struct resource atmel_twi0_resource[] = {
++ PBMEM(0xffe00800),
++ IRQ(5),
++};
++DEFINE_DEV(atmel_twi, 0);
++DEV_CLK(pclk,atmel_twi0,pba,2);
++
++struct platform_device *__init
++at32_add_device_twi(unsigned int id)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0:
++ pdev = &atmel_twi0_device;
++ select_peripheral(PA(6), PERIPH_A, 0); /* SDA */
++ select_peripheral(PA(7), PERIPH_A, 0); /* SCL */
++ break;
++
++ default:
++ return NULL;
++ }
++
++ platform_device_register(pdev);
++ return pdev;
++}
++
++/* --------------------------------------------------------------------
++ * MMC
++ * -------------------------------------------------------------------- */
++static struct mci_platform_data atmel_mci0_data = {
++ .detect_pin = GPIO_PIN_NONE,
++ .wp_pin = GPIO_PIN_NONE,
++};
++static struct resource atmel_mci0_resource[] = {
++ PBMEM(0xfff02400),
++ IRQ(28),
++};
++DEFINE_DEV_DATA(atmel_mci, 0);
++DEV_CLK(mci_clk, atmel_mci0, pbb, 9);
++
++struct platform_device *__init
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0:
++ pdev = &atmel_mci0_device;
++ select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
++ select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
++ select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
++ select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
++ select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
++ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
++ break;
++ default:
++ return NULL;
++ }
++
++ if (data) {
++ if (data->detect_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->detect_pin, 0);
++ if (data->wp_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->wp_pin, 0);
++ memcpy(pdev->dev.platform_data, data,
++ sizeof(struct mci_platform_data));
++ }
++
++ platform_device_register(pdev);
++ return pdev;
++}
++
++/* --------------------------------------------------------------------
+ * LCDC
+ * -------------------------------------------------------------------- */
+-static struct lcdc_platform_data lcdc0_data;
+-static struct resource lcdc0_resource[] = {
++static struct atmel_lcdfb_info atmel_lcdfb0_data;
++static struct resource atmel_lcdfb0_resource[] = {
+ {
+ .start = 0xff000000,
+ .end = 0xff000fff,
+ .flags = IORESOURCE_MEM,
+ },
+ IRQ(1),
++ {
++ /* Placeholder for pre-allocated fb memory */
++ .start = 0x00000000,
++ .end = 0x00000000,
++ .flags = 0,
++ },
+ };
+-DEFINE_DEV_DATA(lcdc, 0);
+-DEV_CLK(hclk, lcdc0, hsb, 7);
+-static struct clk lcdc0_pixclk = {
+- .name = "pixclk",
+- .dev = &lcdc0_device.dev,
++DEFINE_DEV_DATA(atmel_lcdfb, 0);
++DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
++static struct clk atmel_lcdfb0_pixclk = {
++ .name = "lcdc_clk",
++ .dev = &atmel_lcdfb0_device.dev,
+ .mode = genclk_mode,
+ .get_rate = genclk_get_rate,
+ .set_rate = genclk_set_rate,
+@@ -840,13 +1042,34 @@ static struct clk lcdc0_pixclk = {
+ };
+
+ struct platform_device *__init
+-at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data)
++at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
++ unsigned long fbmem_start, unsigned long fbmem_len)
+ {
+ struct platform_device *pdev;
++ struct atmel_lcdfb_info *info;
++ struct fb_monspecs *monspecs;
++ struct fb_videomode *modedb;
++ unsigned int modedb_size;
++
++ /*
++ * Do a deep copy of the fb data, monspecs and modedb. Make
++ * sure all allocations are done before setting up the
++ * portmux.
++ */
++ monspecs = kmemdup(data->default_monspecs,
++ sizeof(struct fb_monspecs), GFP_KERNEL);
++ if (!monspecs)
++ return NULL;
++
++ modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
++ modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
++ if (!modedb)
++ goto err_dup_modedb;
++ monspecs->modedb = modedb;
+
+ switch (id) {
+ case 0:
+- pdev = &lcdc0_device;
++ pdev = &atmel_lcdfb0_device;
+ select_peripheral(PC(19), PERIPH_A, 0); /* CC */
+ select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
+ select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
+@@ -879,16 +1102,287 @@ at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data)
+ select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
+ select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
+
+- clk_set_parent(&lcdc0_pixclk, &pll0);
+- clk_set_rate(&lcdc0_pixclk, clk_get_rate(&pll0));
++ clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
++ clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
++ break;
++
++ default:
++ goto err_invalid_id;
++ }
++
++ if (fbmem_len) {
++ pdev->resource[2].start = fbmem_start;
++ pdev->resource[2].end = fbmem_start + fbmem_len - 1;
++ pdev->resource[2].flags = IORESOURCE_MEM;
++ }
++
++ info = pdev->dev.platform_data;
++ memcpy(info, data, sizeof(struct atmel_lcdfb_info));
++ info->default_monspecs = monspecs;
++
++ platform_device_register(pdev);
++ return pdev;
++
++err_invalid_id:
++ kfree(modedb);
++err_dup_modedb:
++ kfree(monspecs);
++ return NULL;
++}
++
++/* --------------------------------------------------------------------
++ * USB Device Controller
++ * -------------------------------------------------------------------- */
++static struct resource usba0_resource[] = {
++ {
++ .start = 0xff300000,
++ .end = 0xff3fffff,
++ .flags = IORESOURCE_MEM,
++ },
++ PBMEM(0xfff03000),
++ IRQ(31),
++};
++DEFINE_DEV(usba, 0);
++DEV_CLK(pclk, usba0, pbb, 12);
++DEV_CLK(hclk, usba0, hsb, 6);
++
++struct platform_device *__init at32_add_device_usba(unsigned int id)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0:
++ pdev = &usba0_device;
++ /* USB pads are not multiplexed */
+ break;
++ default:
++ return NULL;
++ }
+
++ platform_device_register(pdev);
++ return pdev;
++}
++
++/* --------------------------------------------------------------------
++ * SSC
++ * -------------------------------------------------------------------- */
++static struct resource ssc0_resource[] = {
++ PBMEM(0xffe01c00),
++ IRQ(10),
++};
++DEFINE_DEV(ssc, 0);
++DEV_CLK(pclk, ssc0, pba, 7);
++
++static struct resource ssc1_resource[] = {
++ PBMEM(0xffe02000),
++ IRQ(11),
++};
++DEFINE_DEV(ssc, 1);
++DEV_CLK(pclk, ssc1, pba, 8);
++
++static struct resource ssc2_resource[] = {
++ PBMEM(0xffe02400),
++ IRQ(12),
++};
++DEFINE_DEV(ssc, 2);
++DEV_CLK(pclk, ssc2, pba, 9);
++
++struct platform_device *__init
++at32_add_device_ssc(unsigned int id, unsigned int flags)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0:
++ pdev = &ssc0_device;
++ if (flags & ATMEL_SSC_RF)
++ select_peripheral(PA(21), PERIPH_A, 0); /* RF */
++ if (flags & ATMEL_SSC_RK)
++ select_peripheral(PA(22), PERIPH_A, 0); /* RK */
++ if (flags & ATMEL_SSC_TK)
++ select_peripheral(PA(23), PERIPH_A, 0); /* TK */
++ if (flags & ATMEL_SSC_TF)
++ select_peripheral(PA(24), PERIPH_A, 0); /* TF */
++ if (flags & ATMEL_SSC_TD)
++ select_peripheral(PA(25), PERIPH_A, 0); /* TD */
++ if (flags & ATMEL_SSC_RD)
++ select_peripheral(PA(26), PERIPH_A, 0); /* RD */
++ break;
++ case 1:
++ pdev = &ssc1_device;
++ if (flags & ATMEL_SSC_RF)
++ select_peripheral(PA(0), PERIPH_B, 0); /* RF */
++ if (flags & ATMEL_SSC_RK)
++ select_peripheral(PA(1), PERIPH_B, 0); /* RK */
++ if (flags & ATMEL_SSC_TK)
++ select_peripheral(PA(2), PERIPH_B, 0); /* TK */
++ if (flags & ATMEL_SSC_TF)
++ select_peripheral(PA(3), PERIPH_B, 0); /* TF */
++ if (flags & ATMEL_SSC_TD)
++ select_peripheral(PA(4), PERIPH_B, 0); /* TD */
++ if (flags & ATMEL_SSC_RD)
++ select_peripheral(PA(5), PERIPH_B, 0); /* RD */
++ break;
++ case 2:
++ pdev = &ssc2_device;
++ if (flags & ATMEL_SSC_TD)
++ select_peripheral(PB(13), PERIPH_A, 0); /* TD */
++ if (flags & ATMEL_SSC_RD)
++ select_peripheral(PB(14), PERIPH_A, 0); /* RD */
++ if (flags & ATMEL_SSC_TK)
++ select_peripheral(PB(15), PERIPH_A, 0); /* TK */
++ if (flags & ATMEL_SSC_TF)
++ select_peripheral(PB(16), PERIPH_A, 0); /* TF */
++ if (flags & ATMEL_SSC_RF)
++ select_peripheral(PB(17), PERIPH_A, 0); /* RF */
++ if (flags & ATMEL_SSC_RK)
++ select_peripheral(PB(18), PERIPH_A, 0); /* RK */
++ break;
++ default:
++ return NULL;
++ }
++
++ platform_device_register(pdev);
++ return pdev;
++}
++
++/* --------------------------------------------------------------------
++ * AC97C
++ * -------------------------------------------------------------------- */
++static struct resource atmel_ac97c0_resource[] = {
++ PBMEM(0xfff02800),
++ IRQ(29),
++};
++DEFINE_DEV(atmel_ac97c, 0);
++DEV_CLK(pclk, atmel_ac97c0, pbb, 10);
++
++struct platform_device *__init
++at32_add_device_ac97c(unsigned int id)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0:
++ pdev = &atmel_ac97c0_device;
++ select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
++ select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
++ select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
++ select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
++ break;
+ default:
+ return NULL;
+ }
+
++ platform_device_register(pdev);
++ return pdev;
++}
++
++/* --------------------------------------------------------------------
++ * DAC
++ * -------------------------------------------------------------------- */
++static struct resource abdac0_resource[] = {
++ PBMEM(0xfff02000),
++ IRQ(27),
++};
++DEFINE_DEV(abdac, 0);
++DEV_CLK(pclk, abdac0, pbb, 8);
++static struct clk abdac0_sample_clk = {
++ .name = "sample_clk",
++ .dev = &abdac0_device.dev,
++ .mode = genclk_mode,
++ .get_rate = genclk_get_rate,
++ .set_rate = genclk_set_rate,
++ .set_parent = genclk_set_parent,
++ .index = 6,
++};
++
++struct platform_device *__init
++at32_add_device_abdac(unsigned int id)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0:
++ pdev = &abdac0_device;
++ select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */
++ select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */
++ select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */
++ select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */
++ break;
++ default:
++ return NULL;
++ }
++
++ platform_device_register(pdev);
++ return pdev;
++}
++
++/* --------------------------------------------------------------------
++ * CompactFlash
++ * -------------------------------------------------------------------- */
++static struct cf_platform_data at32_cf0_data;
++static struct resource at32_cf0_resource[] = {
++ {
++ .start = 0x04000000,
++ .end = 0x07ffffff,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(~0UL),
++};
++DEFINE_DEV_DATA(at32_cf, 0);
++
++struct platform_device *__init
++at32_add_device_cf(unsigned int id, unsigned int extint,
++ struct cf_platform_data *data)
++{
++ struct platform_device *pdev;
++ unsigned int extint_pin;
++
++ switch (extint) {
++ case 0:
++ extint_pin = GPIO_PIN_PB(25);
++ break;
++ case 1:
++ extint_pin = GPIO_PIN_PB(26);
++ break;
++ case 2:
++ extint_pin = GPIO_PIN_PB(27);
++ break;
++ case 3:
++ extint_pin = GPIO_PIN_PB(28);
++ break;
++ default:
++ return NULL;
++ }
++
++ switch (id) {
++ case 0:
++ pdev = &at32_cf0_device;
++ select_peripheral(PE(19), PERIPH_A, 0); /* CFCE1 */
++ select_peripheral(PE(20), PERIPH_A, 0); /* CFCE2 */
++ select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 */
++ select_peripheral(PE(23), PERIPH_A, 0); /* CFNRW */
++ select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT */
++ set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
++ data->cs = 4;
++ break;
++ default:
++ return NULL;
++ }
++
++ if (data->detect_pin)
++ at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
++ if (data->reset_pin)
++ at32_select_gpio(data->reset_pin, 0);
++ if (data->vcc_pin)
++ at32_select_gpio(data->vcc_pin, 0);
++
++ at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_PULLUP);
++ pdev->resource[1].start = system_manager.eim_first_irq + extint;
++ pdev->resource[1].end = pdev->resource[1].start;
++
+ memcpy(pdev->dev.platform_data, data,
+- sizeof(struct lcdc_platform_data));
++ sizeof(struct cf_platform_data));
+
+ platform_device_register(pdev);
+ return pdev;
+@@ -950,18 +1444,21 @@ struct clk *at32_clock_list[] = {
+ &pbb_clk,
+ &at32_sm_pclk,
+ &at32_intc0_pclk,
++ &hmatrix_clk,
+ &ebi_clk,
+ &hramc_clk,
+ &smc0_pclk,
+ &smc0_mck,
+ &pdc_hclk,
+ &pdc_pclk,
++ &dmaca0_hclk,
+ &pico_clk,
+ &pio0_mck,
+ &pio1_mck,
+ &pio2_mck,
+ &pio3_mck,
+ &pio4_mck,
++ &at32_systc0_pclk,
+ &atmel_usart0_usart,
+ &atmel_usart1_usart,
+ &atmel_usart2_usart,
+@@ -972,8 +1469,18 @@ struct clk *at32_clock_list[] = {
+ &macb1_pclk,
+ &atmel_spi0_spi_clk,
+ &atmel_spi1_spi_clk,
+- &lcdc0_hclk,
+- &lcdc0_pixclk,
++ &atmel_twi0_pclk,
++ &atmel_mci0_mci_clk,
++ &atmel_lcdfb0_hck1,
++ &atmel_lcdfb0_pixclk,
++ &usba0_pclk,
++ &usba0_hclk,
++ &ssc0_pclk,
++ &ssc1_pclk,
++ &ssc2_pclk,
++ &atmel_ac97c0_pclk,
++ &abdac0_pclk,
++ &abdac0_sample_clk,
+ &gclk0,
+ &gclk1,
+ &gclk2,
+@@ -1012,7 +1519,8 @@ void __init at32_clock_init(void)
+ genclk_init_parent(&gclk2);
+ genclk_init_parent(&gclk3);
+ genclk_init_parent(&gclk4);
+- genclk_init_parent(&lcdc0_pixclk);
++ genclk_init_parent(&atmel_lcdfb0_pixclk);
++ genclk_init_parent(&abdac0_sample_clk);
+
+ /*
+ * Turn on all clocks that have at least one user already, and
+@@ -1024,6 +1532,9 @@ void __init at32_clock_init(void)
+ for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
+ struct clk *clk = at32_clock_list[i];
+
++ if (clk->users == 0)
++ continue;
++
+ if (clk->mode == &cpu_clk_mode)
+ cpu_mask |= 1 << clk->index;
+ else if (clk->mode == &hsb_clk_mode)
+diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
+index 00c4354..e8a12a3 100644
+--- a/arch/avr32/mach-at32ap/clock.c
++++ b/arch/avr32/mach-at32ap/clock.c
+@@ -18,7 +18,7 @@
+
+ #include "clock.h"
+
+-static spinlock_t clk_lock = SPIN_LOCK_UNLOCKED;
++static DEFINE_SPINLOCK(clk_lock);
+
+ struct clk *clk_get(struct device *dev, const char *id)
+ {
+@@ -125,7 +125,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
+ ret = clk->set_rate(clk, rate, 1);
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+- return (ret < 0) ? ret : 0;
++ return (ret > 0) ? ret : 0;
+ }
+ EXPORT_SYMBOL(clk_set_rate);
+
+diff --git a/arch/avr32/mach-at32ap/hmatrix.h b/arch/avr32/mach-at32ap/hmatrix.h
+new file mode 100644
+index 0000000..d10bfb6
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/hmatrix.h
+@@ -0,0 +1,182 @@
++/*
++ * Register definitions for High-Speed Bus Matrix
++ */
++#ifndef __HMATRIX_H
++#define __HMATRIX_H
++
++/* HMATRIX register offsets */
++#define HMATRIX_MCFG0 0x0000
++#define HMATRIX_MCFG1 0x0004
++#define HMATRIX_MCFG2 0x0008
++#define HMATRIX_MCFG3 0x000c
++#define HMATRIX_MCFG4 0x0010
++#define HMATRIX_MCFG5 0x0014
++#define HMATRIX_MCFG6 0x0018
++#define HMATRIX_MCFG7 0x001c
++#define HMATRIX_MCFG8 0x0020
++#define HMATRIX_MCFG9 0x0024
++#define HMATRIX_MCFG10 0x0028
++#define HMATRIX_MCFG11 0x002c
++#define HMATRIX_MCFG12 0x0030
++#define HMATRIX_MCFG13 0x0034
++#define HMATRIX_MCFG14 0x0038
++#define HMATRIX_MCFG15 0x003c
++#define HMATRIX_SCFG0 0x0040
++#define HMATRIX_SCFG1 0x0044
++#define HMATRIX_SCFG2 0x0048
++#define HMATRIX_SCFG3 0x004c
++#define HMATRIX_SCFG4 0x0050
++#define HMATRIX_SCFG5 0x0054
++#define HMATRIX_SCFG6 0x0058
++#define HMATRIX_SCFG7 0x005c
++#define HMATRIX_SCFG8 0x0060
++#define HMATRIX_SCFG9 0x0064
++#define HMATRIX_SCFG10 0x0068
++#define HMATRIX_SCFG11 0x006c
++#define HMATRIX_SCFG12 0x0070
++#define HMATRIX_SCFG13 0x0074
++#define HMATRIX_SCFG14 0x0078
++#define HMATRIX_SCFG15 0x007c
++#define HMATRIX_PRAS0 0x0080
++#define HMATRIX_PRBS0 0x0084
++#define HMATRIX_PRAS1 0x0088
++#define HMATRIX_PRBS1 0x008c
++#define HMATRIX_PRAS2 0x0090
++#define HMATRIX_PRBS2 0x0094
++#define HMATRIX_PRAS3 0x0098
++#define HMATRIX_PRBS3 0x009c
++#define HMATRIX_PRAS4 0x00a0
++#define HMATRIX_PRBS4 0x00a4
++#define HMATRIX_PRAS5 0x00a8
++#define HMATRIX_PRBS5 0x00ac
++#define HMATRIX_PRAS6 0x00b0
++#define HMATRIX_PRBS6 0x00b4
++#define HMATRIX_PRAS7 0x00b8
++#define HMATRIX_PRBS7 0x00bc
++#define HMATRIX_PRAS8 0x00c0
++#define HMATRIX_PRBS8 0x00c4
++#define HMATRIX_PRAS9 0x00c8
++#define HMATRIX_PRBS9 0x00cc
++#define HMATRIX_PRAS10 0x00d0
++#define HMATRIX_PRBS10 0x00d4
++#define HMATRIX_PRAS11 0x00d8
++#define HMATRIX_PRBS11 0x00dc
++#define HMATRIX_PRAS12 0x00e0
++#define HMATRIX_PRBS12 0x00e4
++#define HMATRIX_PRAS13 0x00e8
++#define HMATRIX_PRBS13 0x00ec
++#define HMATRIX_PRAS14 0x00f0
++#define HMATRIX_PRBS14 0x00f4
++#define HMATRIX_PRAS15 0x00f8
++#define HMATRIX_PRBS15 0x00fc
++#define HMATRIX_MRCR 0x0100
++#define HMATRIX_SFR0 0x0110
++#define HMATRIX_SFR1 0x0114
++#define HMATRIX_SFR2 0x0118
++#define HMATRIX_SFR3 0x011c
++#define HMATRIX_SFR4 0x0120
++#define HMATRIX_SFR5 0x0124
++#define HMATRIX_SFR6 0x0128
++#define HMATRIX_SFR7 0x012c
++#define HMATRIX_SFR8 0x0130
++#define HMATRIX_SFR9 0x0134
++#define HMATRIX_SFR10 0x0138
++#define HMATRIX_SFR11 0x013c
++#define HMATRIX_SFR12 0x0140
++#define HMATRIX_SFR13 0x0144
++#define HMATRIX_SFR14 0x0148
++#define HMATRIX_SFR15 0x014c
++
++/* Bitfields in MCFGx */
++#define HMATRIX_ULBT_OFFSET 0
++#define HMATRIX_ULBT_SIZE 3
++
++/* Bitfields in SCFGx */
++#define HMATRIX_SLOT_CYCLE_OFFSET 0
++#define HMATRIX_SLOT_CYCLE_SIZE 8
++#define HMATRIX_DEFMSTR_TYPE_OFFSET 16
++#define HMATRIX_DEFMSTR_TYPE_SIZE 2
++#define HMATRIX_FIXED_DEFMSTR_OFFSET 18
++#define HMATRIX_FIXED_DEFMSTR_SIZE 4
++#define HMATRIX_ARBT_OFFSET 24
++#define HMATRIX_ARBT_SIZE 2
++
++/* Bitfields in PRASx */
++#define HMATRIX_M0PR_OFFSET 0
++#define HMATRIX_M0PR_SIZE 4
++#define HMATRIX_M1PR_OFFSET 4
++#define HMATRIX_M1PR_SIZE 4
++#define HMATRIX_M2PR_OFFSET 8
++#define HMATRIX_M2PR_SIZE 4
++#define HMATRIX_M3PR_OFFSET 12
++#define HMATRIX_M3PR_SIZE 4
++#define HMATRIX_M4PR_OFFSET 16
++#define HMATRIX_M4PR_SIZE 4
++#define HMATRIX_M5PR_OFFSET 20
++#define HMATRIX_M5PR_SIZE 4
++#define HMATRIX_M6PR_OFFSET 24
++#define HMATRIX_M6PR_SIZE 4
++#define HMATRIX_M7PR_OFFSET 28
++#define HMATRIX_M7PR_SIZE 4
++
++/* Bitfields in PRBSx */
++#define HMATRIX_M8PR_OFFSET 0
++#define HMATRIX_M8PR_SIZE 4
++#define HMATRIX_M9PR_OFFSET 4
++#define HMATRIX_M9PR_SIZE 4
++#define HMATRIX_M10PR_OFFSET 8
++#define HMATRIX_M10PR_SIZE 4
++#define HMATRIX_M11PR_OFFSET 12
++#define HMATRIX_M11PR_SIZE 4
++#define HMATRIX_M12PR_OFFSET 16
++#define HMATRIX_M12PR_SIZE 4
++#define HMATRIX_M13PR_OFFSET 20
++#define HMATRIX_M13PR_SIZE 4
++#define HMATRIX_M14PR_OFFSET 24
++#define HMATRIX_M14PR_SIZE 4
++#define HMATRIX_M15PR_OFFSET 28
++#define HMATRIX_M15PR_SIZE 4
++
++/* Bitfields in SFR4 */
++#define HMATRIX_CS1A_OFFSET 1
++#define HMATRIX_CS1A_SIZE 1
++#define HMATRIX_CS3A_OFFSET 3
++#define HMATRIX_CS3A_SIZE 1
++#define HMATRIX_CS4A_OFFSET 4
++#define HMATRIX_CS4A_SIZE 1
++#define HMATRIX_CS5A_OFFSET 5
++#define HMATRIX_CS5A_SIZE 1
++#define HMATRIX_DBPUC_OFFSET 8
++#define HMATRIX_DBPUC_SIZE 1
++
++/* Constants for ULBT */
++#define HMATRIX_ULBT_INFINITE 0
++#define HMATRIX_ULBT_SINGLE 1
++#define HMATRIX_ULBT_FOUR_BEAT 2
++#define HMATRIX_ULBT_EIGHT_BEAT 3
++#define HMATRIX_ULBT_SIXTEEN_BEAT 4
++
++/* Constants for DEFMSTR_TYPE */
++#define HMATRIX_DEFMSTR_TYPE_NO_DEFAULT 0
++#define HMATRIX_DEFMSTR_TYPE_LAST_DEFAULT 1
++#define HMATRIX_DEFMSTR_TYPE_FIXED_DEFAULT 2
++
++/* Constants for ARBT */
++#define HMATRIX_ARBT_ROUND_ROBIN 0
++#define HMATRIX_ARBT_FIXED_PRIORITY 1
++
++/* Bit manipulation macros */
++#define HMATRIX_BIT(name) \
++ (1 << HMATRIX_##name##_OFFSET)
++#define HMATRIX_BF(name,value) \
++ (((value) & ((1 << HMATRIX_##name##_SIZE) - 1)) \
++ << HMATRIX_##name##_OFFSET)
++#define HMATRIX_BFEXT(name,value) \
++ (((value) >> HMATRIX_##name##_OFFSET) \
++ & ((1 << HMATRIX_##name##_SIZE) - 1))
++#define HMATRIX_BFINS(name,value,old) \
++ (((old) & ~(((1 << HMATRIX_##name##_SIZE) - 1) \
++ << HMATRIX_##name##_OFFSET)) \
++ | HMATRIX_BF(name,value))
++
++#endif /* __HMATRIX_H */
+diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
+index 7691721..5e22a75 100644
+--- a/arch/avr32/mach-at32ap/hsmc.c
++++ b/arch/avr32/mach-at32ap/hsmc.c
+@@ -75,12 +75,35 @@ int smc_set_configuration(int cs, const struct smc_config *config)
+ return -EINVAL;
+ }
+
++ switch (config->nwait_mode) {
++ case 0:
++ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_DISABLED);
++ break;
++ case 1:
++ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_RESERVED);
++ break;
++ case 2:
++ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_FROZEN);
++ break;
++ case 3:
++ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_READY);
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ if (config->tdf_cycles) {
++ mode |= HSMC_BF(TDF_CYCLES, config->tdf_cycles);
++ }
++
+ if (config->nrd_controlled)
+ mode |= HSMC_BIT(READ_MODE);
+ if (config->nwe_controlled)
+ mode |= HSMC_BIT(WRITE_MODE);
+ if (config->byte_write)
+ mode |= HSMC_BIT(BAT);
++ if (config->tdf_mode)
++ mode |= HSMC_BIT(TDF_MODE);
+
+ pr_debug("smc cs%d: setup/%08x pulse/%08x cycle/%08x mode/%08x\n",
+ cs, setup, pulse, cycle, mode);
+diff --git a/arch/avr32/mach-at32ap/time-tc.c b/arch/avr32/mach-at32ap/time-tc.c
+new file mode 100644
+index 0000000..e3070bd
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/time-tc.c
+@@ -0,0 +1,218 @@
++/*
++ * Copyright (C) 2004-2007 Atmel Corporation
++ *
++ * Based on MIPS implementation arch/mips/kernel/time.c
++ * Copyright 2001 MontaVista Software Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/clk.h>
++#include <linux/clocksource.h>
++#include <linux/time.h>
++#include <linux/module.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/kernel_stat.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/profile.h>
++#include <linux/sysdev.h>
++#include <linux/err.h>
++
++#include <asm/div64.h>
++#include <asm/sysreg.h>
++#include <asm/io.h>
++#include <asm/sections.h>
++
++#include <asm/arch/time.h>
++
++/* how many counter cycles in a jiffy? */
++static u32 cycles_per_jiffy;
++
++/* the count value for the next timer interrupt */
++static u32 expirelo;
++
++/* the I/O registers of the TC module */
++static void __iomem *ioregs;
++
++cycle_t read_cycle_count(void)
++{
++ return (cycle_t)timer_read(ioregs, 0, CV);
++}
++
++struct clocksource clocksource_avr32 = {
++ .name = "avr32",
++ .rating = 342,
++ .read = read_cycle_count,
++ .mask = CLOCKSOURCE_MASK(16),
++ .shift = 16,
++ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
++};
++
++static void avr32_timer_ack(void)
++{
++ u16 count = expirelo;
++
++ /* Ack this timer interrupt and set the next one, use a u16
++ * variable so it will wrap around correctly */
++ count += cycles_per_jiffy;
++ expirelo = count;
++ timer_write(ioregs, 0, RC, expirelo);
++
++ /* Check to see if we have missed any timer interrupts */
++ count = timer_read(ioregs, 0, CV);
++ if ((count - expirelo) < 0x7fff) {
++ expirelo = count + cycles_per_jiffy;
++ timer_write(ioregs, 0, RC, expirelo);
++ }
++}
++
++u32 avr32_hpt_read(void)
++{
++ return timer_read(ioregs, 0, CV);
++}
++
++static int avr32_timer_calc_div_and_set_jiffies(struct clk *pclk)
++{
++ unsigned int cycles_max = (clocksource_avr32.mask + 1) / 2;
++ unsigned int divs[] = { 4, 8, 16, 32 };
++ int divs_size = sizeof(divs) / sizeof(*divs);
++ int i = 0;
++ unsigned long count_hz;
++ unsigned long shift;
++ unsigned long mult;
++ int clock_div = -1;
++ u64 tmp;
++
++ shift = clocksource_avr32.shift;
++
++ do {
++ count_hz = clk_get_rate(pclk) / divs[i];
++ mult = clocksource_hz2mult(count_hz, shift);
++ clocksource_avr32.mult = mult;
++
++ tmp = TICK_NSEC;
++ tmp <<= shift;
++ tmp += mult / 2;
++ do_div(tmp, mult);
++
++ cycles_per_jiffy = tmp;
++ } while (cycles_per_jiffy > cycles_max && ++i < divs_size);
++
++ clock_div = i + 1;
++
++ if (clock_div > divs_size) {
++ pr_debug("timer: could not calculate clock divider\n");
++ return -EFAULT;
++ }
++
++ /* Set the clock divider */
++ timer_write(ioregs, 0, CMR, TIMER_BF(CMR_TCCLKS, clock_div));
++
++ return 0;
++}
++
++int avr32_hpt_init(unsigned int count)
++{
++ struct resource *regs;
++ struct clk *pclk;
++ int irq = -1;
++ int ret = 0;
++
++ ret = -ENXIO;
++
++ irq = platform_get_irq(&at32_systc0_device, 0);
++ if (irq < 0) {
++ pr_debug("timer: could not get irq\n");
++ goto out_error;
++ }
++
++ pclk = clk_get(&at32_systc0_device.dev, "pclk");
++ if (IS_ERR(pclk)) {
++ pr_debug("timer: could not get clk: %ld\n", PTR_ERR(pclk));
++ goto out_error;
++ }
++ clk_enable(pclk);
++
++ regs = platform_get_resource(&at32_systc0_device, IORESOURCE_MEM, 0);
++ if (!regs) {
++ pr_debug("timer: could not get resource\n");
++ goto out_error_clk;
++ }
++
++ ioregs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!ioregs) {
++ pr_debug("timer: could not get ioregs\n");
++ goto out_error_clk;
++ }
++
++ ret = avr32_timer_calc_div_and_set_jiffies(pclk);
++ if (ret)
++ goto out_error_io;
++
++ ret = setup_irq(irq, &timer_irqaction);
++ if (ret) {
++ pr_debug("timer: could not request irq %d: %d\n",
++ irq, ret);
++ goto out_error_io;
++ }
++
++ expirelo = (timer_read(ioregs, 0, CV) / cycles_per_jiffy + 1)
++ * cycles_per_jiffy;
++
++ /* Enable clock and interrupts on RC compare */
++ timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_CLKEN));
++ timer_write(ioregs, 0, IER, TIMER_BIT(IER_CPCS));
++ /* Set cycles to first interrupt */
++ timer_write(ioregs, 0, RC, expirelo);
++
++ printk(KERN_INFO "timer: AT32AP system timer/counter at 0x%p irq %d\n",
++ ioregs, irq);
++
++ return 0;
++
++out_error_io:
++ iounmap(ioregs);
++out_error_clk:
++ clk_put(pclk);
++out_error:
++ return ret;
++}
++
++int avr32_hpt_start(void)
++{
++ timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_SWTRG));
++ return 0;
++}
++
++irqreturn_t timer_interrupt(int irq, void *dev_id)
++{
++ unsigned int sr = timer_read(ioregs, 0, SR);
++
++ if (sr & TIMER_BIT(SR_CPCS)) {
++ /* ack timer interrupt and try to set next interrupt */
++ avr32_timer_ack();
++
++ /*
++ * Call the generic timer interrupt handler
++ */
++ write_seqlock(&xtime_lock);
++ do_timer(1);
++ write_sequnlock(&xtime_lock);
++
++ /*
++ * In UP mode, we call local_timer_interrupt() to do profiling
++ * and process accounting.
++ *
++ * SMP is not supported yet.
++ */
++ local_timer_interrupt(irq, dev_id);
++
++ return IRQ_HANDLED;
++ }
++
++ return IRQ_NONE;
++}
+diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c
+index b68d669..099212d 100644
+--- a/arch/avr32/mm/dma-coherent.c
++++ b/arch/avr32/mm/dma-coherent.c
+@@ -112,16 +112,21 @@ void dma_free_coherent(struct device *dev, size_t size,
+ }
+ EXPORT_SYMBOL(dma_free_coherent);
+
+-#if 0
+ void *dma_alloc_writecombine(struct device *dev, size_t size,
+ dma_addr_t *handle, gfp_t gfp)
+ {
+ struct page *page;
++ dma_addr_t phys;
+
+ page = __dma_alloc(dev, size, handle, gfp);
++ if (!page)
++ return NULL;
++
++ phys = page_to_phys(page);
++ *handle = phys;
+
+ /* Now, map the page into P3 with write-combining turned on */
+- return __ioremap(page_to_phys(page), size, _PAGE_BUFFER);
++ return __ioremap(phys, size, _PAGE_BUFFER);
+ }
+ EXPORT_SYMBOL(dma_alloc_writecombine);
+
+@@ -132,8 +137,7 @@ void dma_free_writecombine(struct device *dev, size_t size,
+
+ iounmap(cpu_addr);
+
+- page = bus_to_page(handle);
++ page = phys_to_page(handle);
+ __dma_free(dev, size, page, handle);
+ }
+ EXPORT_SYMBOL(dma_free_writecombine);
+-#endif
+diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c
+index 6785572..11941d8 100644
+--- a/arch/avr32/mm/fault.c
++++ b/arch/avr32/mm/fault.c
+@@ -12,73 +12,46 @@
+ #include <linux/mm.h>
+ #include <linux/module.h>
+ #include <linux/pagemap.h>
++#include <linux/kprobes.h>
+
+ #include <asm/kdebug.h>
+ #include <asm/mmu_context.h>
+ #include <asm/sysreg.h>
+-#include <asm/uaccess.h>
+ #include <asm/tlb.h>
+-
+-#ifdef DEBUG
+-static void dump_code(unsigned long pc)
+-{
+- char *p = (char *)pc;
+- char val;
+- int i;
+-
+-
+- printk(KERN_DEBUG "Code:");
+- for (i = 0; i < 16; i++) {
+- if (__get_user(val, p + i))
+- break;
+- printk(" %02x", val);
+- }
+- printk("\n");
+-}
+-#endif
++#include <asm/uaccess.h>
+
+ #ifdef CONFIG_KPROBES
+-ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain);
+-
+-/* Hook to register for page fault notifications */
+-int register_page_fault_notifier(struct notifier_block *nb)
++static inline int notify_page_fault(struct pt_regs *regs, int trap)
+ {
+- return atomic_notifier_chain_register(&notify_page_fault_chain, nb);
+-}
++ int ret = 0;
+
+-int unregister_page_fault_notifier(struct notifier_block *nb)
+-{
+- return atomic_notifier_chain_unregister(&notify_page_fault_chain, nb);
+-}
++ if (!user_mode(regs)) {
++ if (kprobe_running() && kprobe_fault_handler(regs, trap))
++ ret = 1;
++ }
+
+-static inline int notify_page_fault(enum die_val val, struct pt_regs *regs,
+- int trap, int sig)
+-{
+- struct die_args args = {
+- .regs = regs,
+- .trapnr = trap,
+- };
+- return atomic_notifier_call_chain(&notify_page_fault_chain, val, &args);
++ return ret;
+ }
+ #else
+-static inline int notify_page_fault(enum die_val val, struct pt_regs *regs,
+- int trap, int sig)
++static inline int notify_page_fault(struct pt_regs *regs, int trap)
+ {
+- return NOTIFY_DONE;
++ return 0;
+ }
+ #endif
+
++int exception_trace = 1;
++
+ /*
+ * This routine handles page faults. It determines the address and the
+ * problem, and then passes it off to one of the appropriate routines.
+ *
+ * ecr is the Exception Cause Register. Possible values are:
+- * 5: Page not found (instruction access)
+ * 6: Protection fault (instruction access)
+- * 12: Page not found (read access)
+- * 13: Page not found (write access)
+- * 14: Protection fault (read access)
+- * 15: Protection fault (write access)
++ * 15: Protection fault (read access)
++ * 16: Protection fault (write access)
++ * 20: Page not found (instruction access)
++ * 24: Page not found (read access)
++ * 28: Page not found (write access)
+ */
+ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
+ {
+@@ -88,10 +61,11 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
+ const struct exception_table_entry *fixup;
+ unsigned long address;
+ unsigned long page;
+- int writeaccess = 0;
++ int writeaccess;
++ long signr;
++ int code;
+
+- if (notify_page_fault(DIE_PAGE_FAULT, regs,
+- ecr, SIGSEGV) == NOTIFY_STOP)
++ if (notify_page_fault(regs, ecr))
+ return;
+
+ address = sysreg_read(TLBEAR);
+@@ -99,6 +73,9 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
+ tsk = current;
+ mm = tsk->mm;
+
++ signr = SIGSEGV;
++ code = SEGV_MAPERR;
++
+ /*
+ * If we're in an interrupt or have no user context, we must
+ * not take the fault...
+@@ -125,7 +102,9 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
+ * can handle it...
+ */
+ good_area:
+- //pr_debug("good area: vm_flags = 0x%lx\n", vma->vm_flags);
++ code = SEGV_ACCERR;
++ writeaccess = 0;
++
+ switch (ecr) {
+ case ECR_PROTECTION_X:
+ case ECR_TLB_MISS_X:
+@@ -176,46 +155,24 @@ survive:
+ * map. Fix it, but check if it's kernel or user first...
+ */
+ bad_area:
+- pr_debug("Bad area [%s:%u]: addr %08lx, ecr %lu\n",
+- tsk->comm, tsk->pid, address, ecr);
+-
+ up_read(&mm->mmap_sem);
+
+ if (user_mode(regs)) {
+- /* Hmm...we have to pass address and ecr somehow... */
+- /* tsk->thread.address = address;
+- tsk->thread.error_code = ecr; */
+-#ifdef DEBUG
+- show_regs(regs);
+- dump_code(regs->pc);
+-
+- page = sysreg_read(PTBR);
+- printk("ptbr = %08lx", page);
+- if (page) {
+- page = ((unsigned long *)page)[address >> 22];
+- printk(" pgd = %08lx", page);
+- if (page & _PAGE_PRESENT) {
+- page &= PAGE_MASK;
+- address &= 0x003ff000;
+- page = ((unsigned long *)__va(page))[address >> PAGE_SHIFT];
+- printk(" pte = %08lx\n", page);
+- }
+- }
+-#endif
+- pr_debug("Sending SIGSEGV to PID %d...\n",
+- tsk->pid);
+- force_sig(SIGSEGV, tsk);
++ if (exception_trace && printk_ratelimit())
++ printk("%s%s[%d]: segfault at %08lx pc %08lx "
++ "sp %08lx ecr %lu\n",
++ is_init(tsk) ? KERN_EMERG : KERN_INFO,
++ tsk->comm, tsk->pid, address, regs->pc,
++ regs->sp, ecr);
++ _exception(SIGSEGV, regs, code, address);
+ return;
+ }
+
+ no_context:
+- pr_debug("No context\n");
+-
+ /* Are we prepared to handle this kernel fault? */
+ fixup = search_exception_tables(regs->pc);
+ if (fixup) {
+ regs->pc = fixup->fixup;
+- pr_debug("Found fixup at %08lx\n", fixup->fixup);
+ return;
+ }
+
+@@ -230,7 +187,6 @@ no_context:
+ printk(KERN_ALERT
+ "Unable to handle kernel paging request");
+ printk(" at virtual address %08lx\n", address);
+- printk(KERN_ALERT "pc = %08lx\n", regs->pc);
+
+ page = sysreg_read(PTBR);
+ printk(KERN_ALERT "ptbr = %08lx", page);
+@@ -241,20 +197,20 @@ no_context:
+ page &= PAGE_MASK;
+ address &= 0x003ff000;
+ page = ((unsigned long *)__va(page))[address >> PAGE_SHIFT];
+- printk(" pte = %08lx\n", page);
++ printk(" pte = %08lx", page);
+ }
+ }
+- die("\nOops", regs, ecr);
+- do_exit(SIGKILL);
++ printk("\n");
++ die("Kernel access of bad area", regs, signr);
++ return;
+
+ /*
+ * We ran out of memory, or some other thing happened to us
+ * that made us unable to handle the page fault gracefully.
+ */
+ out_of_memory:
+- printk("Out of memory\n");
+ up_read(&mm->mmap_sem);
+- if (current->pid == 1) {
++ if (is_init(current)) {
+ yield();
+ down_read(&mm->mmap_sem);
+ goto survive;
+@@ -267,21 +223,20 @@ out_of_memory:
+ do_sigbus:
+ up_read(&mm->mmap_sem);
+
+- /*
+- * Send a sigbus, regardless of whether we were in kernel or
+- * user mode.
+- */
+- /* address, error_code, trap_no, ... */
+-#ifdef DEBUG
+- show_regs(regs);
+- dump_code(regs->pc);
+-#endif
+- pr_debug("Sending SIGBUS to PID %d...\n", tsk->pid);
+- force_sig(SIGBUS, tsk);
+-
+ /* Kernel mode? Handle exceptions or die */
++ signr = SIGBUS;
++ code = BUS_ADRERR;
+ if (!user_mode(regs))
+ goto no_context;
++
++ if (exception_trace)
++ printk("%s%s[%d]: bus error at %08lx pc %08lx "
++ "sp %08lx ecr %lu\n",
++ is_init(tsk) ? KERN_EMERG : KERN_INFO,
++ tsk->comm, tsk->pid, address, regs->pc,
++ regs->sp, ecr);
++
++ _exception(SIGBUS, regs, BUS_ADRERR, address);
+ }
+
+ asmlinkage void do_bus_error(unsigned long addr, int write_access,
+@@ -292,8 +247,7 @@ asmlinkage void do_bus_error(unsigned long addr, int write_access,
+ addr, write_access ? "write" : "read");
+ printk(KERN_INFO "DTLB dump:\n");
+ dump_dtlb();
+- die("Bus Error", regs, write_access);
+- do_exit(SIGKILL);
++ die("Bus Error", regs, SIGKILL);
+ }
+
+ /*
+diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
+index 70da689..82cf708 100644
+--- a/arch/avr32/mm/init.c
++++ b/arch/avr32/mm/init.c
+@@ -10,11 +10,9 @@
+ #include <linux/mm.h>
+ #include <linux/swap.h>
+ #include <linux/init.h>
+-#include <linux/initrd.h>
+ #include <linux/mmzone.h>
+ #include <linux/bootmem.h>
+ #include <linux/pagemap.h>
+-#include <linux/pfn.h>
+ #include <linux/nodemask.h>
+
+ #include <asm/page.h>
+@@ -78,242 +76,6 @@ void show_mem(void)
+ printk ("%d pages swap cached\n", cached);
+ }
+
+-static void __init print_memory_map(const char *what,
+- struct tag_mem_range *mem)
+-{
+- printk ("%s:\n", what);
+- for (; mem; mem = mem->next) {
+- printk (" %08lx - %08lx\n",
+- (unsigned long)mem->addr,
+- (unsigned long)(mem->addr + mem->size));
+- }
+-}
+-
+-#define MAX_LOWMEM HIGHMEM_START
+-#define MAX_LOWMEM_PFN PFN_DOWN(MAX_LOWMEM)
+-
+-/*
+- * Sort a list of memory regions in-place by ascending address.
+- *
+- * We're using bubble sort because we only have singly linked lists
+- * with few elements.
+- */
+-static void __init sort_mem_list(struct tag_mem_range **pmem)
+-{
+- int done;
+- struct tag_mem_range **a, **b;
+-
+- if (!*pmem)
+- return;
+-
+- do {
+- done = 1;
+- a = pmem, b = &(*pmem)->next;
+- while (*b) {
+- if ((*a)->addr > (*b)->addr) {
+- struct tag_mem_range *tmp;
+- tmp = (*b)->next;
+- (*b)->next = *a;
+- *a = *b;
+- *b = tmp;
+- done = 0;
+- }
+- a = &(*a)->next;
+- b = &(*a)->next;
+- }
+- } while (!done);
+-}
+-
+-/*
+- * Find a free memory region large enough for storing the
+- * bootmem bitmap.
+- */
+-static unsigned long __init
+-find_bootmap_pfn(const struct tag_mem_range *mem)
+-{
+- unsigned long bootmap_pages, bootmap_len;
+- unsigned long node_pages = PFN_UP(mem->size);
+- unsigned long bootmap_addr = mem->addr;
+- struct tag_mem_range *reserved = mem_reserved;
+- struct tag_mem_range *ramdisk = mem_ramdisk;
+- unsigned long kern_start = virt_to_phys(_stext);
+- unsigned long kern_end = virt_to_phys(_end);
+-
+- bootmap_pages = bootmem_bootmap_pages(node_pages);
+- bootmap_len = bootmap_pages << PAGE_SHIFT;
+-
+- /*
+- * Find a large enough region without reserved pages for
+- * storing the bootmem bitmap. We can take advantage of the
+- * fact that all lists have been sorted.
+- *
+- * We have to check explicitly reserved regions as well as the
+- * kernel image and any RAMDISK images...
+- *
+- * Oh, and we have to make sure we don't overwrite the taglist
+- * since we're going to use it until the bootmem allocator is
+- * fully up and running.
+- */
+- while (1) {
+- if ((bootmap_addr < kern_end) &&
+- ((bootmap_addr + bootmap_len) > kern_start))
+- bootmap_addr = kern_end;
+-
+- while (reserved &&
+- (bootmap_addr >= (reserved->addr + reserved->size)))
+- reserved = reserved->next;
+-
+- if (reserved &&
+- ((bootmap_addr + bootmap_len) >= reserved->addr)) {
+- bootmap_addr = reserved->addr + reserved->size;
+- continue;
+- }
+-
+- while (ramdisk &&
+- (bootmap_addr >= (ramdisk->addr + ramdisk->size)))
+- ramdisk = ramdisk->next;
+-
+- if (!ramdisk ||
+- ((bootmap_addr + bootmap_len) < ramdisk->addr))
+- break;
+-
+- bootmap_addr = ramdisk->addr + ramdisk->size;
+- }
+-
+- if ((PFN_UP(bootmap_addr) + bootmap_len) >= (mem->addr + mem->size))
+- return ~0UL;
+-
+- return PFN_UP(bootmap_addr);
+-}
+-
+-void __init setup_bootmem(void)
+-{
+- unsigned bootmap_size;
+- unsigned long first_pfn, bootmap_pfn, pages;
+- unsigned long max_pfn, max_low_pfn;
+- unsigned long kern_start = virt_to_phys(_stext);
+- unsigned long kern_end = virt_to_phys(_end);
+- unsigned node = 0;
+- struct tag_mem_range *bank, *res;
+-
+- sort_mem_list(&mem_phys);
+- sort_mem_list(&mem_reserved);
+-
+- print_memory_map("Physical memory", mem_phys);
+- print_memory_map("Reserved memory", mem_reserved);
+-
+- nodes_clear(node_online_map);
+-
+- if (mem_ramdisk) {
+-#ifdef CONFIG_BLK_DEV_INITRD
+- initrd_start = (unsigned long)__va(mem_ramdisk->addr);
+- initrd_end = initrd_start + mem_ramdisk->size;
+-
+- print_memory_map("RAMDISK images", mem_ramdisk);
+- if (mem_ramdisk->next)
+- printk(KERN_WARNING
+- "Warning: Only the first RAMDISK image "
+- "will be used\n");
+- sort_mem_list(&mem_ramdisk);
+-#else
+- printk(KERN_WARNING "RAM disk image present, but "
+- "no initrd support in kernel!\n");
+-#endif
+- }
+-
+- if (mem_phys->next)
+- printk(KERN_WARNING "Only using first memory bank\n");
+-
+- for (bank = mem_phys; bank; bank = NULL) {
+- first_pfn = PFN_UP(bank->addr);
+- max_low_pfn = max_pfn = PFN_DOWN(bank->addr + bank->size);
+- bootmap_pfn = find_bootmap_pfn(bank);
+- if (bootmap_pfn > max_pfn)
+- panic("No space for bootmem bitmap!\n");
+-
+- if (max_low_pfn > MAX_LOWMEM_PFN) {
+- max_low_pfn = MAX_LOWMEM_PFN;
+-#ifndef CONFIG_HIGHMEM
+- /*
+- * Lowmem is memory that can be addressed
+- * directly through P1/P2
+- */
+- printk(KERN_WARNING
+- "Node %u: Only %ld MiB of memory will be used.\n",
+- node, MAX_LOWMEM >> 20);
+- printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
+-#else
+-#error HIGHMEM is not supported by AVR32 yet
+-#endif
+- }
+-
+- /* Initialize the boot-time allocator with low memory only. */
+- bootmap_size = init_bootmem_node(NODE_DATA(node), bootmap_pfn,
+- first_pfn, max_low_pfn);
+-
+- printk("Node %u: bdata = %p, bdata->node_bootmem_map = %p\n",
+- node, NODE_DATA(node)->bdata,
+- NODE_DATA(node)->bdata->node_bootmem_map);
+-
+- /*
+- * Register fully available RAM pages with the bootmem
+- * allocator.
+- */
+- pages = max_low_pfn - first_pfn;
+- free_bootmem_node (NODE_DATA(node), PFN_PHYS(first_pfn),
+- PFN_PHYS(pages));
+-
+- /*
+- * Reserve space for the kernel image (if present in
+- * this node)...
+- */
+- if ((kern_start >= PFN_PHYS(first_pfn)) &&
+- (kern_start < PFN_PHYS(max_pfn))) {
+- printk("Node %u: Kernel image %08lx - %08lx\n",
+- node, kern_start, kern_end);
+- reserve_bootmem_node(NODE_DATA(node), kern_start,
+- kern_end - kern_start);
+- }
+-
+- /* ...the bootmem bitmap... */
+- reserve_bootmem_node(NODE_DATA(node),
+- PFN_PHYS(bootmap_pfn),
+- bootmap_size);
+-
+- /* ...any RAMDISK images... */
+- for (res = mem_ramdisk; res; res = res->next) {
+- if (res->addr > PFN_PHYS(max_pfn))
+- break;
+-
+- if (res->addr >= PFN_PHYS(first_pfn)) {
+- printk("Node %u: RAMDISK %08lx - %08lx\n",
+- node,
+- (unsigned long)res->addr,
+- (unsigned long)(res->addr + res->size));
+- reserve_bootmem_node(NODE_DATA(node),
+- res->addr, res->size);
+- }
+- }
+-
+- /* ...and any other reserved regions. */
+- for (res = mem_reserved; res; res = res->next) {
+- if (res->addr > PFN_PHYS(max_pfn))
+- break;
+-
+- if (res->addr >= PFN_PHYS(first_pfn)) {
+- printk("Node %u: Reserved %08lx - %08lx\n",
+- node,
+- (unsigned long)res->addr,
+- (unsigned long)(res->addr + res->size));
+- reserve_bootmem_node(NODE_DATA(node),
+- res->addr, res->size);
+- }
+- }
+-
+- node_set_online(node);
+- }
+-}
+-
+ /*
+ * paging_init() sets up the page tables
+ *
+diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
+index e812aa1..84d9847 100644
+--- a/drivers/char/watchdog/Kconfig
++++ b/drivers/char/watchdog/Kconfig
+@@ -183,6 +183,26 @@ config PNX4008_WATCHDOG
+
+ Say N if you are unsure.
+
++# AVR32 Architecture
++
++config AT32AP700X_WDT
++ tristate "AT32AP700x watchdog"
++ depends on WATCHDOG && CPU_AT32AP7000
++ help
++ Watchdog timer embedded into AT32AP700x devices. This will reboot
++ your system when the timeout is reached.
++
++config AT32AP700X_WDT_TIMEOUT
++ int "Timeout value for AT32AP700x watchdog"
++ depends on AT32AP700X_WDT
++ default "2"
++ range 1 2
++ help
++ Sets the timeout value for the watchdog in AT32AP700x devices.
++ Limited by hardware to be 1 or 2 seconds.
++
++ Set to 2 seconds by default.
++
+ # X86 (i386 + ia64 + x86_64) Architecture
+
+ config ACQUIRE_WDT
+diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile
+index 2cd8ff8..8b2a530 100644
+--- a/drivers/char/watchdog/Makefile
++++ b/drivers/char/watchdog/Makefile
+@@ -35,6 +35,9 @@ obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
+ obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
+ obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
+
++# AVR32 Architecture
++obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
++
+ # X86 (i386 + ia64 + x86_64) Architecture
+ obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
+ obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
+diff --git a/drivers/char/watchdog/at32ap700x_wdt.c b/drivers/char/watchdog/at32ap700x_wdt.c
+new file mode 100644
+index 0000000..789456d
+--- /dev/null
++++ b/drivers/char/watchdog/at32ap700x_wdt.c
+@@ -0,0 +1,312 @@
++/*
++ * Watchdog driver for Atmel AT32AP700X devices
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/miscdevice.h>
++#include <linux/fs.h>
++#include <linux/platform_device.h>
++#include <linux/watchdog.h>
++
++#include <asm/uaccess.h>
++#include <asm/io.h>
++
++#define TIMEOUT_MIN 1
++#define TIMEOUT_DEFAULT CONFIG_AT32AP700X_WDT_TIMEOUT
++#define TIMEOUT_MAX 2
++
++/* Watchdog registers and write/read macro */
++#define WDT_CTRL 0x00
++#define WDT_CTRL_EN 0
++#define WDT_CTRL_PSEL 8
++#define WDT_CTRL_KEY 24
++
++#define WDT_CLR 0x04
++
++#define WDT_BIT(name) (1 << WDT_##name)
++#define WDT_BF(name,value) ((value) << WDT_##name)
++
++#define wdt_readl(dev,reg) \
++ __raw_readl((dev)->regs + WDT_##reg)
++#define wdt_writel(dev,reg,value) \
++ __raw_writel((value), (dev)->regs + WDT_##reg)
++
++struct wdt_at32ap700x {
++ void __iomem *regs;
++ int timeout;
++ int users;
++};
++
++static struct wdt_at32ap700x *wdt;
++
++/*
++ * Disable the watchdog.
++ */
++static void inline at32_wdt_stop(void)
++{
++ unsigned long psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f);
++ wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55));
++ wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa));
++}
++
++/*
++ * Enable and reset the watchdog.
++ */
++static void inline at32_wdt_start(void)
++{
++ /* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
++ unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe;
++
++ wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
++ | WDT_BF(CTRL_PSEL, psel)
++ | WDT_BF(CTRL_KEY, 0x55));
++ wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
++ | WDT_BF(CTRL_PSEL, psel)
++ | WDT_BF(CTRL_KEY, 0xaa));
++}
++
++/*
++ * Pat the watchdog timer.
++ */
++static void inline at32_wdt_pat(void)
++{
++ wdt_writel(wdt, CLR, 0x42);
++}
++
++/*
++ * Watchdog device is opened, and watchdog starts running.
++ */
++static int at32_wdt_open(struct inode *inode, struct file *file)
++{
++ if (test_and_set_bit(1, &wdt->users))
++ return -EBUSY;
++
++ at32_wdt_start();
++ return nonseekable_open(inode, file);
++}
++
++/*
++ * Close the watchdog device. If CONFIG_WATCHDOG_NOWAYOUT is _not_ defined then
++ * the watchdog is also disabled.
++ */
++static int at32_wdt_close(struct inode *inode, struct file *file)
++{
++#ifndef CONFIG_WATCHDOG_NOWAYOUT
++ at32_wdt_stop();
++#endif
++ clear_bit(1, &wdt->users);
++ return 0;
++}
++
++/*
++ * Change the watchdog time interval.
++ */
++static int at32_wdt_settimeout(int time)
++{
++ /*
++ * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is
++ * 2 ^ 16 allowing up to 2 seconds timeout.
++ */
++ if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX))
++ return -EINVAL;
++
++ /* Set new watchdog time. It will be used when at32_wdt_start() is called. */
++ wdt->timeout = time;
++ return 0;
++}
++
++static struct watchdog_info at32_wdt_info = {
++ .identity = "at32ap700x watchdog",
++ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
++};
++
++/*
++ * Handle commands from user-space.
++ */
++static int at32_wdt_ioctl(struct inode *inode, struct file *file,
++ unsigned int cmd, unsigned long arg)
++{
++ int ret = -ENOTTY;
++ int time;
++ void __user *argp = (void __user *)arg;
++ int __user *p = argp;
++
++ switch(cmd) {
++ case WDIOC_KEEPALIVE:
++ at32_wdt_pat();
++ ret = 0;
++ break;
++ case WDIOC_GETSUPPORT:
++ ret = copy_to_user(argp, &at32_wdt_info,
++ sizeof(at32_wdt_info)) ? -EFAULT : 0;
++ break;
++ case WDIOC_SETTIMEOUT:
++ ret = get_user(time, p);
++ if (ret)
++ break;
++ ret = at32_wdt_settimeout(time);
++ if (ret)
++ break;
++ /* Enable new time value */
++ at32_wdt_start();
++ /* fall through */
++ case WDIOC_GETTIMEOUT:
++ ret = put_user(wdt->timeout, p);
++ break;
++ case WDIOC_GETSTATUS: /* fall through */
++ case WDIOC_GETBOOTSTATUS:
++ ret = put_user(0, p);
++ break;
++ case WDIOC_SETOPTIONS:
++ ret = get_user(time, p);
++ if (ret)
++ break;
++ if (time & WDIOS_DISABLECARD)
++ at32_wdt_stop();
++ if (time & WDIOS_ENABLECARD)
++ at32_wdt_start();
++ ret = 0;
++ break;
++ }
++
++ return ret;
++}
++
++static ssize_t at32_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
++{
++ at32_wdt_pat();
++ return len;
++}
++
++static const struct file_operations at32_wdt_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .ioctl = at32_wdt_ioctl,
++ .open = at32_wdt_open,
++ .release = at32_wdt_close,
++ .write = at32_wdt_write,
++};
++
++static struct miscdevice at32_wdt_miscdev = {
++ .minor = WATCHDOG_MINOR,
++ .name = "watchdog",
++ .fops = &at32_wdt_fops,
++};
++
++static int __init at32_wdt_probe(struct platform_device *pdev)
++{
++ struct resource *regs;
++ int ret;
++
++ wdt = kmalloc(sizeof(struct wdt_at32ap700x), GFP_KERNEL);
++ if (!wdt) {
++ ret = -ENOMEM;
++ goto out;
++ }
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs) {
++ pr_debug(KERN_ERR "wdt: no mmio resource defined for WDT\n");
++ ret = -ENXIO;
++ goto out;
++ }
++
++ wdt->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ wdt->users = 0;
++
++ if (at32_wdt_settimeout(TIMEOUT_DEFAULT)) {
++ at32_wdt_settimeout(TIMEOUT_MAX);
++ pr_info("at32_wdt: timeout invalid, set to %d sec.\n",
++ TIMEOUT_MAX);
++ }
++
++ if (at32_wdt_miscdev.parent)
++ return -EBUSY;
++ at32_wdt_miscdev.parent = &pdev->dev;
++
++ ret = misc_register(&at32_wdt_miscdev);
++ if (ret)
++ return ret;
++
++ printk(KERN_INFO "Atmel WDT for AT32AP700X at %08lx\n",
++ (unsigned long)wdt->regs);
++ return 0;
++
++out:
++ if (wdt)
++ kfree(wdt);
++ return ret;
++}
++
++static int __exit at32_wdt_remove(struct platform_device *pdev)
++{
++ int ret;
++
++ ret = misc_deregister(&at32_wdt_miscdev);
++ if (!ret)
++ at32_wdt_miscdev.parent = NULL;
++
++ if (wdt)
++ kfree(wdt);
++
++ return ret;
++}
++
++static void at32_wdt_shutdown(struct platform_device *pdev)
++{
++ at32_wdt_stop();
++}
++
++#ifdef CONFIG_PM
++static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message)
++{
++ at32_wdt_stop();
++ return 0;
++}
++
++static int at32_wdt_resume(struct platform_device *pdev)
++{
++ if (wdt->users)
++ at32_wdt_start();
++ return 0;
++}
++#endif
++
++static struct platform_driver at32_wdt_driver = {
++ .remove = __exit_p(at32_wdt_remove),
++#ifdef CONFIG_PM
++ .suspend = at32_wdt_suspend,
++ .resume = at32_wdt_resume,
++#endif
++ .driver = {
++ .name = "wdt",
++ .owner = THIS_MODULE,
++ },
++ .shutdown = at32_wdt_shutdown,
++};
++
++static int __init at32_wdt_init(void)
++{
++ return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe);
++}
++module_init(at32_wdt_init);
++
++static void __exit at32_wdt_exit(void)
++{
++ platform_driver_unregister(&at32_wdt_driver);
++}
++module_exit(at32_wdt_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
+index ece31d2..a77c24b 100644
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -5,6 +5,26 @@
+ menu "I2C Hardware Bus support"
+ depends on I2C
+
++config I2C_ATMELTWI
++ tristate "Atmel TWI/I2C"
++ depends on I2C
++ help
++ Atmel on-chip TWI controller. Say Y if you have an AT32 or
++ AT91-based device and want to use its built-in TWI
++ functionality. Atmel's TWI is compatible with Philips' I2C
++ protocol. If in doubt, say NO
++
++config I2C_ATMELTWI_BAUDRATE
++ prompt "Atmel TWI baudrate"
++ depends on I2C_ATMELTWI
++ int
++ default 100000
++ help
++ Set the TWI/I2C baudrate. This will alter the default value. A
++ different baudrate can be set by using a module parameter as well. If
++ no parameter is provided when loading, this is the value that will be
++ used.
++
+ config I2C_ALI1535
+ tristate "ALI 1535"
+ depends on I2C && PCI
+@@ -102,6 +122,14 @@ config I2C_ELEKTOR
+ This support is also available as a module. If so, the module
+ will be called i2c-elektor.
+
++config I2C_GPIO
++ tristate "GPIO-based bitbanging I2C"
++ depends on GENERIC_GPIO
++ select I2C_ALGOBIT
++ help
++ This is a very simple bitbanging I2C driver utilizing the
++ arch-neutral GPIO API to control the SCL and SDA lines.
++
+ config I2C_HYDRA
+ tristate "CHRP Apple Hydra Mac I/O I2C interface"
+ depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL
+diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
+index 290b540..604fe49 100644
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -11,6 +11,7 @@ obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o
+ obj-$(CONFIG_I2C_AT91) += i2c-at91.o
+ obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
+ obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
++obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
+ obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
+ obj-$(CONFIG_I2C_I801) += i2c-i801.o
+ obj-$(CONFIG_I2C_I810) += i2c-i810.o
+@@ -48,6 +49,7 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
+ obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
+ obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
++obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
+
+ ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+ EXTRA_CFLAGS += -DDEBUG
+diff --git a/drivers/i2c/busses/atmeltwi.h b/drivers/i2c/busses/atmeltwi.h
+new file mode 100644
+index 0000000..8502ea6
+--- /dev/null
++++ b/drivers/i2c/busses/atmeltwi.h
+@@ -0,0 +1,117 @@
++/*
++ * Register definitions for the Atmel Two-Wire Interface
++ */
++
++#ifndef __ASM_AVR32_TWI_H__
++#define __ASM_AVR32_TWI_H__
++
++/* TWI register offsets */
++#define TWI_CR 0x0000
++#define TWI_MMR 0x0004
++#define TWI_SMR 0x0008
++#define TWI_IADR 0x000c
++#define TWI_CWGR 0x0010
++#define TWI_SR 0x0020
++#define TWI_IER 0x0024
++#define TWI_IDR 0x0028
++#define TWI_IMR 0x002c
++#define TWI_RHR 0x0030
++#define TWI_THR 0x0034
++
++/* Bitfields in CR */
++#define TWI_START_OFFSET 0
++#define TWI_START_SIZE 1
++#define TWI_STOP_OFFSET 1
++#define TWI_STOP_SIZE 1
++#define TWI_MSEN_OFFSET 2
++#define TWI_MSEN_SIZE 1
++#define TWI_MSDIS_OFFSET 3
++#define TWI_MSDIS_SIZE 1
++#define TWI_SVEN_OFFSET 4
++#define TWI_SVEN_SIZE 1
++#define TWI_SVDIS_OFFSET 5
++#define TWI_SVDIS_SIZE 1
++#define TWI_SWRST_OFFSET 7
++#define TWI_SWRST_SIZE 1
++
++/* Bitfields in MMR */
++#define TWI_IADRSZ_OFFSET 8
++#define TWI_IADRSZ_SIZE 2
++#define TWI_MREAD_OFFSET 12
++#define TWI_MREAD_SIZE 1
++#define TWI_DADR_OFFSET 16
++#define TWI_DADR_SIZE 7
++
++/* Bitfields in SMR */
++#define TWI_SADR_OFFSET 16
++#define TWI_SADR_SIZE 7
++
++/* Bitfields in IADR */
++#define TWI_IADR_OFFSET 0
++#define TWI_IADR_SIZE 24
++
++/* Bitfields in CWGR */
++#define TWI_CLDIV_OFFSET 0
++#define TWI_CLDIV_SIZE 8
++#define TWI_CHDIV_OFFSET 8
++#define TWI_CHDIV_SIZE 8
++#define TWI_CKDIV_OFFSET 16
++#define TWI_CKDIV_SIZE 3
++
++/* Bitfields in SR */
++#define TWI_TXCOMP_OFFSET 0
++#define TWI_TXCOMP_SIZE 1
++#define TWI_RXRDY_OFFSET 1
++#define TWI_RXRDY_SIZE 1
++#define TWI_TXRDY_OFFSET 2
++#define TWI_TXRDY_SIZE 1
++#define TWI_SVDIR_OFFSET 3
++#define TWI_SVDIR_SIZE 1
++#define TWI_SVACC_OFFSET 4
++#define TWI_SVACC_SIZE 1
++#define TWI_GCACC_OFFSET 5
++#define TWI_GCACC_SIZE 1
++#define TWI_OVRE_OFFSET 6
++#define TWI_OVRE_SIZE 1
++#define TWI_UNRE_OFFSET 7
++#define TWI_UNRE_SIZE 1
++#define TWI_NACK_OFFSET 8
++#define TWI_NACK_SIZE 1
++#define TWI_ARBLST_OFFSET 9
++#define TWI_ARBLST_SIZE 1
++
++/* Bitfields in RHR */
++#define TWI_RXDATA_OFFSET 0
++#define TWI_RXDATA_SIZE 8
++
++/* Bitfields in THR */
++#define TWI_TXDATA_OFFSET 0
++#define TWI_TXDATA_SIZE 8
++
++/* Constants for IADRSZ */
++#define TWI_IADRSZ_NO_ADDR 0
++#define TWI_IADRSZ_ONE_BYTE 1
++#define TWI_IADRSZ_TWO_BYTES 2
++#define TWI_IADRSZ_THREE_BYTES 3
++
++/* Bit manipulation macros */
++#define TWI_BIT(name) \
++ (1 << TWI_##name##_OFFSET)
++#define TWI_BF(name,value) \
++ (((value) & ((1 << TWI_##name##_SIZE) - 1)) \
++ << TWI_##name##_OFFSET)
++#define TWI_BFEXT(name,value) \
++ (((value) >> TWI_##name##_OFFSET) \
++ & ((1 << TWI_##name##_SIZE) - 1))
++#define TWI_BFINS(name,value,old) \
++ (((old) & ~(((1 << TWI_##name##_SIZE) - 1) \
++ << TWI_##name##_OFFSET)) \
++ | TWI_BF(name,value))
++
++/* Register access macros */
++#define twi_readl(port,reg) \
++ __raw_readl((port)->regs + TWI_##reg)
++#define twi_writel(port,reg,value) \
++ __raw_writel((value), (port)->regs + TWI_##reg)
++
++#endif /* __ASM_AVR32_TWI_H__ */
+diff --git a/drivers/i2c/busses/i2c-atmeltwi.c b/drivers/i2c/busses/i2c-atmeltwi.c
+new file mode 100644
+index 0000000..3418465
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-atmeltwi.c
+@@ -0,0 +1,348 @@
++/*
++ * i2c Support for Atmel's Two-Wire Interface (TWI)
++ *
++ * Based on the work of Copyright (C) 2004 Rick Bronson
++ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
++ * Ported to AVR32 and heavily modified by Espen Krangnes <ekrangnes at atmel.com>
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * Borrowed heavily from the original work by:
++ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#include <linux/err.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/types.h>
++#include <linux/delay.h>
++#include <linux/i2c.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/platform_device.h>
++#include <linux/completion.h>
++#include <asm/io.h>
++#include <linux/time.h>
++#include "atmeltwi.h"
++
++static unsigned int baudrate = CONFIG_I2C_ATMELTWI_BAUDRATE;
++module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
++MODULE_PARM_DESC(baudrate, "The TWI baudrate");
++
++
++struct atmel_twi {
++ void __iomem *regs;
++ struct i2c_adapter adapter;
++ struct clk *pclk;
++ spinlock_t lock;
++ struct completion comp;
++ u32 intmask;
++ u8 *buf;
++ u8 len;
++ u8 acks_left;
++ unsigned int irq;
++
++};
++#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
++
++/*
++ * Initialize the TWI hardware registers.
++ */
++static int __devinit twi_hwinit(struct atmel_twi *twi)
++{
++ unsigned long cdiv, ckdiv=0;
++
++ twi_writel(twi, IDR, ~0UL);
++ twi_writel(twi, CR, TWI_BIT(SWRST)); /*Reset peripheral*/
++ twi_readl(twi, SR);
++
++ cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
++
++ while (cdiv > 255) {
++ ckdiv++;
++ cdiv = cdiv >> 1;
++ }
++
++ if (ckdiv > 7)
++ return -EINVAL;
++ else
++ twi_writel(twi, CWGR, (TWI_BF(CKDIV, ckdiv)
++ | TWI_BF(CHDIV, cdiv)
++ | TWI_BF(CLDIV, cdiv)));
++ return 0;
++}
++
++/*
++ * Waits for the i2c status register to set the specified bitmask
++ * Returns 0 if timed out (~100ms).
++ */
++static short twi_wait_for_completion(struct atmel_twi *twi,
++ u32 mask)
++{
++ int timeout = msecs_to_jiffies(100);
++
++ twi->intmask = mask;
++ init_completion(&twi->comp);
++
++ twi_writel(twi, IER, mask);
++
++ if(!wait_for_completion_timeout(&twi->comp, timeout))
++ return -ETIMEDOUT;
++
++ return 0;
++}
++
++/*
++ * Generic i2c master transfer entrypoint.
++ */
++static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
++{
++ struct atmel_twi *twi = to_atmel_twi(adap);
++ struct i2c_msg *pmsg;
++ int i;
++
++ /* get first message */
++ pmsg = msgs;
++
++ dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
++
++ for (i = 0; i < num; i++, pmsg++) {
++
++ twi->len = pmsg->len;
++ twi->buf = pmsg->buf;
++ twi->acks_left = pmsg->len;
++ twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
++ (pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
++ twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
++
++ dev_dbg(&adap->dev,"#%d: internal addr %d %s byte%s %s 0x%02x\n",
++ i,pmsg->len, pmsg->flags & I2C_M_RD ? "reading" : "writing",
++ pmsg->len > 1 ? "s" : "",
++ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
++
++ /* enable */
++ twi_writel(twi, CR, TWI_BIT(MSEN));
++
++ if (pmsg->flags & I2C_M_RD) {
++ twi_writel(twi, CR, TWI_BIT(START));
++ if ( twi_wait_for_completion(twi,TWI_BIT(RXRDY))==-ETIMEDOUT ) {
++ dev_dbg(&adap->dev, "RXRDY timeout. Stopped with %d bytes left\n",
++ twi->acks_left);
++ return -ETIMEDOUT;
++ }
++
++ /* Send Stop, and Wait until transfer is finished */
++ if ( twi_wait_for_completion(twi,TWI_BIT(TXCOMP))==-ETIMEDOUT ) {
++ dev_dbg(&adap->dev, "TXCOMP timeout\n");
++ return -ETIMEDOUT;
++ }
++
++ } else {
++ twi_writel(twi, THR, twi->buf[0]);
++ if ( twi_wait_for_completion(twi,TWI_BIT(TXRDY))==-ETIMEDOUT ) {
++ dev_dbg(&adap->dev, "TXRDY timeout. Stopped with %d bytes left\n",
++ twi->acks_left);
++ return -ETIMEDOUT;
++ }
++ }
++
++ /* Disable TWI interface */
++ twi_writel(twi, CR, TWI_BIT(MSDIS));
++
++ } /* end cur msg */
++
++ return i;
++}
++
++
++static irqreturn_t twi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
++{
++ struct atmel_twi *twi = dev_id;
++ int status = twi_readl(twi, SR);
++
++ if (twi->intmask & status){
++ if (twi->intmask & TWI_BIT(NACK)) {
++ goto nack;
++ } else if (twi->intmask & TWI_BIT(RXRDY)){
++ twi->buf[twi->len - twi->acks_left] = twi_readl(twi,RHR);
++ if(--twi->acks_left==1)
++ twi_writel(twi, CR, TWI_BIT(STOP));
++ if (twi->acks_left==0)
++ goto complete;
++ } else if (twi->intmask & TWI_BIT(TXRDY)) {
++ twi->acks_left--;
++ if (twi->acks_left==0) {
++ twi->intmask = TWI_BIT(TXCOMP);
++ twi_writel(twi, IER, TWI_BIT(TXCOMP));
++ } else
++ twi_writel(twi, THR, twi->buf[twi->len - twi->acks_left]);
++ } else if (twi->intmask & TWI_BIT(TXCOMP)) {
++ goto complete;
++ }
++ }
++
++ return IRQ_HANDLED;
++
++nack:
++ printk(KERN_INFO "NACK received!\n");
++
++complete:
++ twi_writel(twi, IDR, ~0UL);
++ complete(&twi->comp);
++
++ return IRQ_HANDLED;
++
++}
++
++
++/*
++ * Return list of supported functionality.
++ */
++static u32 twi_func(struct i2c_adapter *adapter)
++{
++ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
++}
++
++/* For now, we only handle combined mode (smbus) */
++static struct i2c_algorithm twi_algorithm = {
++ .master_xfer = twi_xfer,
++ .functionality = twi_func,
++};
++
++/*
++ * Main initialization routine.
++ */
++static int __devinit twi_probe(struct platform_device *pdev)
++{
++ struct atmel_twi *twi;
++ struct resource *regs;
++ struct clk *pclk;
++ struct i2c_adapter *adapter;
++ int rc, irq;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++
++ pclk = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(pclk))
++ return PTR_ERR(pclk);
++ clk_enable(pclk);
++
++ rc = -ENOMEM;
++ twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
++ if (!twi) {
++ dev_err(&pdev->dev, "can't allocate interface!\n");
++ goto err_alloc_twi;
++ }
++
++ twi->pclk = pclk;
++ twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!twi->regs)
++ goto err_ioremap;
++
++ irq = platform_get_irq(pdev,0);
++ rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
++ if (rc) {
++ dev_err(&pdev->dev, "can't bind irq!\n");
++ goto err_irq;
++ }
++ twi->irq = irq;
++
++ rc = twi_hwinit(twi);
++ if (rc) {
++ dev_err(&pdev->dev, "Unable to set baudrate\n");
++ goto err_hw_init;
++ }
++
++ adapter = &twi->adapter;
++ sprintf(adapter->name, "TWI");
++ adapter->algo = &twi_algorithm;
++ adapter->class = I2C_CLASS_HWMON;
++ adapter->dev.parent = &pdev->dev;
++
++ platform_set_drvdata(pdev, twi);
++
++ rc = i2c_add_adapter(adapter);
++ if (rc) {
++ dev_err(&pdev->dev, "Adapter %s registration failed\n",
++ adapter->name);
++ goto err_register;
++ }
++
++ dev_info(&pdev->dev, "Atmel TWI i2c bus device (baudrate %dk) at 0x%08lx.\n",
++ baudrate/1000, (unsigned long)regs->start);
++
++ return 0;
++
++
++err_register:
++ platform_set_drvdata(pdev, NULL);
++
++err_hw_init:
++ free_irq(irq, twi);
++
++err_irq:
++ iounmap(twi->regs);
++
++err_ioremap:
++ kfree(twi);
++
++err_alloc_twi:
++ clk_disable(pclk);
++ clk_put(pclk);
++
++ return rc;
++}
++
++static int __devexit twi_remove(struct platform_device *pdev)
++{
++ struct atmel_twi *twi = platform_get_drvdata(pdev);
++ int res;
++
++ platform_set_drvdata(pdev, NULL);
++ res = i2c_del_adapter(&twi->adapter);
++ twi_writel(twi, CR, TWI_BIT(MSDIS));
++ iounmap(twi->regs);
++ clk_disable(twi->pclk);
++ clk_put(twi->pclk);
++ free_irq(twi->irq, twi);
++ kfree(twi);
++
++ return res;
++}
++
++static struct platform_driver twi_driver = {
++ .probe = twi_probe,
++ .remove = __devexit_p(twi_remove),
++ .driver = {
++ .name = "atmel_twi",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init atmel_twi_init(void)
++{
++ return platform_driver_register(&twi_driver);
++}
++
++static void __exit atmel_twi_exit(void)
++{
++ platform_driver_unregister(&twi_driver);
++}
++
++module_init(atmel_twi_init);
++module_exit(atmel_twi_exit);
++
++MODULE_AUTHOR("Espen Krangnes");
++MODULE_DESCRIPTION("I2C driver for Atmel TWI");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
+new file mode 100644
+index 0000000..a7dd546
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-gpio.c
+@@ -0,0 +1,215 @@
++/*
++ * Bitbanging I2C bus driver using the GPIO API
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/i2c.h>
++#include <linux/i2c-algo-bit.h>
++#include <linux/i2c-gpio.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <asm/gpio.h>
++
++/* Toggle SDA by changing the direction of the pin */
++static void i2c_gpio_setsda_dir(void *data, int state)
++{
++ struct i2c_gpio_platform_data *pdata = data;
++
++ if (state)
++ gpio_direction_input(pdata->sda_pin);
++ else
++ gpio_direction_output(pdata->sda_pin, 0);
++}
++
++/*
++ * Toggle SDA by changing the output value of the pin. This is only
++ * valid for pins configured as open drain (i.e. setting the value
++ * high effectively turns off the output driver.)
++ */
++static void i2c_gpio_setsda_val(void *data, int state)
++{
++ struct i2c_gpio_platform_data *pdata = data;
++
++ gpio_set_value(pdata->sda_pin, state);
++}
++
++/* Toggle SCL by changing the direction of the pin. */
++static void i2c_gpio_setscl_dir(void *data, int state)
++{
++ struct i2c_gpio_platform_data *pdata = data;
++
++ if (state)
++ gpio_direction_input(pdata->scl_pin);
++ else
++ gpio_direction_output(pdata->scl_pin, 0);
++}
++
++/*
++ * Toggle SCL by changing the output value of the pin. This is used
++ * for pins that are configured as open drain and for output-only
++ * pins. The latter case will break the i2c protocol, but it will
++ * often work in practice.
++ */
++static void i2c_gpio_setscl_val(void *data, int state)
++{
++ struct i2c_gpio_platform_data *pdata = data;
++
++ gpio_set_value(pdata->scl_pin, state);
++}
++
++int i2c_gpio_getsda(void *data)
++{
++ struct i2c_gpio_platform_data *pdata = data;
++
++ return gpio_get_value(pdata->sda_pin);
++}
++
++int i2c_gpio_getscl(void *data)
++{
++ struct i2c_gpio_platform_data *pdata = data;
++
++ return gpio_get_value(pdata->scl_pin);
++}
++
++static int __init i2c_gpio_probe(struct platform_device *pdev)
++{
++ struct i2c_gpio_platform_data *pdata;
++ struct i2c_algo_bit_data *bit_data;
++ struct i2c_adapter *adap;
++ int ret;
++
++ pdata = pdev->dev.platform_data;
++ if (!pdata)
++ return -ENXIO;
++
++ ret = -ENOMEM;
++ adap = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
++ if (!adap)
++ goto err_alloc_adap;
++ bit_data = kzalloc(sizeof(struct i2c_algo_bit_data), GFP_KERNEL);
++ if (!bit_data)
++ goto err_alloc_bit_data;
++
++ ret = gpio_request(pdata->sda_pin, "sda");
++ if (ret)
++ goto err_request_sda;
++ ret = gpio_request(pdata->scl_pin, "scl");
++ if (ret)
++ goto err_request_scl;
++
++ if (pdata->sda_is_open_drain) {
++ gpio_direction_output(pdata->sda_pin, 1);
++ bit_data->setsda = i2c_gpio_setsda_val;
++ } else {
++ gpio_direction_input(pdata->sda_pin);
++ bit_data->setsda = i2c_gpio_setsda_dir;
++ }
++
++ if (pdata->scl_is_open_drain || pdata->scl_is_output_only) {
++ gpio_direction_output(pdata->scl_pin, 1);
++ bit_data->setscl = i2c_gpio_setscl_val;
++ } else {
++ gpio_direction_input(pdata->scl_pin);
++ bit_data->setscl = i2c_gpio_setscl_dir;
++ }
++
++ if (!pdata->scl_is_output_only)
++ bit_data->getscl = i2c_gpio_getscl;
++ bit_data->getsda = i2c_gpio_getsda;
++
++ if (pdata->udelay)
++ bit_data->udelay = pdata->udelay;
++ else if (pdata->scl_is_output_only)
++ bit_data->udelay = 50; /* 10 kHz */
++ else
++ bit_data->udelay = 5; /* 100 kHz */
++
++ if (pdata->timeout)
++ bit_data->timeout = pdata->timeout;
++ else
++ bit_data->timeout = HZ / 10; /* 100 ms */
++
++ bit_data->data = pdata;
++
++ adap->owner = THIS_MODULE;
++ snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id);
++ adap->algo_data = bit_data;
++ adap->dev.parent = &pdev->dev;
++
++ ret = i2c_bit_add_bus(adap);
++ if (ret)
++ goto err_add_bus;
++
++ platform_set_drvdata(pdev, adap);
++
++ dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n",
++ pdata->sda_pin, pdata->scl_pin,
++ pdata->scl_is_output_only
++ ? ", no clock stretching" : "");
++
++ return 0;
++
++err_add_bus:
++ gpio_free(pdata->scl_pin);
++err_request_scl:
++ gpio_free(pdata->sda_pin);
++err_request_sda:
++ kfree(bit_data);
++err_alloc_bit_data:
++ kfree(adap);
++err_alloc_adap:
++ return ret;
++}
++
++static int __exit i2c_gpio_remove(struct platform_device *pdev)
++{
++ struct i2c_gpio_platform_data *pdata;
++ struct i2c_adapter *adap;
++
++ adap = platform_get_drvdata(pdev);
++ pdata = pdev->dev.platform_data;
++
++ i2c_del_adapter(adap);
++ gpio_free(pdata->scl_pin);
++ gpio_free(pdata->sda_pin);
++ kfree(adap->algo_data);
++ kfree(adap);
++
++ return 0;
++}
++
++static struct platform_driver i2c_gpio_driver = {
++ .driver = {
++ .name = "i2c-gpio",
++ .owner = THIS_MODULE,
++ },
++ .remove = __exit_p(i2c_gpio_remove),
++};
++
++static int __init i2c_gpio_init(void)
++{
++ int ret;
++
++ ret = platform_driver_probe(&i2c_gpio_driver, i2c_gpio_probe);
++ if (ret)
++ printk(KERN_ERR "i2c-gpio: probe failed: %d\n", ret);
++
++ return ret;
++}
++module_init(i2c_gpio_init);
++
++static void __exit i2c_gpio_exit(void)
++{
++ platform_driver_unregister(&i2c_gpio_driver);
++}
++module_exit(i2c_gpio_exit);
++
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_DESCRIPTION("Platform-independent bitbanging I2C driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
+index 35d998c..a3c7057 100644
+--- a/drivers/input/mouse/Kconfig
++++ b/drivers/input/mouse/Kconfig
+@@ -125,4 +125,19 @@ config MOUSE_HIL
+ help
+ Say Y here to support HIL pointers.
+
++config MOUSE_GPIO
++ tristate "GPIO mouse"
++ depends on GENERIC_GPIO
++ help
++ This driver simulates a mouse on GPIO lines of various CPUs (and some
++ other chips).
++
++ Say Y here if your device has buttons or a simple joystick connected
++ directly to GPIO lines. Your board-specific setup logic must also
++ provide a platform device and platform data saying which GPIOs are
++ used.
++
++ To compile this driver as a module, choose M here: the
++ module will be called gpio_mouse.
++
+ endif
+diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
+index 21a1de6..5d0fc43 100644
+--- a/drivers/input/mouse/Makefile
++++ b/drivers/input/mouse/Makefile
+@@ -13,5 +13,6 @@ obj-$(CONFIG_MOUSE_PS2) += psmouse.o
+ obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o
+ obj-$(CONFIG_MOUSE_HIL) += hil_ptr.o
+ obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o
++obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o
+
+ psmouse-objs := psmouse-base.o alps.o logips2pp.o synaptics.o lifebook.o trackpoint.o
+diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
+new file mode 100644
+index 0000000..b7c438e
+--- /dev/null
++++ b/drivers/input/mouse/gpio_mouse.c
+@@ -0,0 +1,305 @@
++/*
++ * Driver for simulating a mouse on GPIO lines.
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/version.h>
++#include <linux/module.h>
++#include <linux/timer.h>
++#include <linux/jiffies.h>
++#include <linux/platform_device.h>
++#include <linux/input.h>
++#include <linux/gpio_mouse.h>
++
++#include <asm/gpio.h>
++
++struct gpio_mouse {
++ struct input_dev *input;
++ struct gpio_mouse_platform_data *gpio;
++ struct timer_list timer;
++};
++
++/*
++ * Timer function which is run every scan_ms ms when the device is opened. The
++ * dev input varaible is set to the the input_dev pointer.
++ */
++static void gpio_mouse_scan(unsigned long _dev)
++{
++ struct input_dev *input = (struct input_dev *)_dev;
++ struct gpio_mouse *gmouse = input->private;
++ struct gpio_mouse_platform_data *gpio = gmouse->gpio;
++ int x, y;
++
++ if (gpio->bleft >= 0)
++ input_report_key(input, BTN_LEFT,
++ gpio_get_value(gpio->bleft) ^ gpio->polarity);
++ if (gpio->bmiddle >= 0)
++ input_report_key(input, BTN_MIDDLE,
++ gpio_get_value(gpio->bmiddle) ^ gpio->polarity);
++ if (gpio->bright >= 0)
++ input_report_key(input, BTN_RIGHT,
++ gpio_get_value(gpio->bright) ^ gpio->polarity);
++
++ x = (gpio_get_value(gpio->right) ^ gpio->polarity)
++ - (gpio_get_value(gpio->left) ^ gpio->polarity);
++ y = (gpio_get_value(gpio->down) ^ gpio->polarity)
++ - (gpio_get_value(gpio->up) ^ gpio->polarity);
++
++ input_report_rel(input, REL_X, x);
++ input_report_rel(input, REL_Y, y);
++ input_sync(input);
++
++ mod_timer(&gmouse->timer, jiffies + msecs_to_jiffies(gpio->scan_ms));
++}
++
++/* Only start the timer when the device is actually in use, i.e. opened. */
++static int gpio_mouse_open(struct input_dev *input)
++{
++ struct gpio_mouse *gmouse = input->private;
++ struct gpio_mouse_platform_data *gpio = gmouse->gpio;
++ gmouse->timer.expires = jiffies + msecs_to_jiffies(gpio->scan_ms);
++ gmouse->timer.data = (unsigned long)input;
++ add_timer(&gmouse->timer);
++ return 0;
++}
++
++static void gpio_mouse_close(struct input_dev *input)
++{
++ struct gpio_mouse *gmouse = input->private;
++ del_timer_sync(&gmouse->timer);
++}
++
++static int __init gpio_mouse_probe(struct platform_device *pdev)
++{
++ struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data;
++ struct gpio_mouse *gmouse;
++ struct input_dev *input;
++ int ret;
++
++ if (!pdata) {
++ dev_dbg(&pdev->dev, "no platform data\n");
++ ret = -ENXIO;
++ goto out;
++ }
++
++ if (pdata->up < 0 || pdata->down < 0 || pdata->right < 0
++ || pdata->left < 0) {
++ dev_dbg(&pdev->dev, "missing GPIO for directions\n");
++ ret = -EINVAL;
++ goto out;
++ }
++ if (pdata->scan_ms < 0) {
++ dev_dbg(&pdev->dev, "invalid scan time\n");
++ ret = -EINVAL;
++ goto out;
++ }
++
++ gmouse = kzalloc(sizeof(struct gpio_mouse), GFP_KERNEL);
++ if (!gmouse) {
++ dev_dbg(&pdev->dev, "not enought memory for gpio_mouse\n");
++ ret = -ENOMEM;
++ goto out;
++ }
++
++ /* Mouse direction, required. */
++ ret = gpio_request(pdata->up, "gpio_mouse_up");
++ if (ret) {
++ dev_dbg(&pdev->dev, "fail up pin\n");
++ goto out_gpio_up;
++ }
++ ret = gpio_request(pdata->down, "gpio_mouse_down");
++ if (ret) {
++ dev_dbg(&pdev->dev, "fail down pin\n");
++ goto out_gpio_down;
++ }
++ ret = gpio_request(pdata->left, "gpio_mouse_left");
++ if (ret) {
++ dev_dbg(&pdev->dev, "fail left pin\n");
++ goto out_gpio_left;
++ }
++ ret = gpio_request(pdata->right, "gpio_mouse_right");
++ if (ret) {
++ dev_dbg(&pdev->dev, "fail right pin\n");
++ goto out_gpio_right;
++ }
++
++ gpio_direction_input(pdata->up);
++ gpio_direction_input(pdata->down);
++ gpio_direction_input(pdata->left);
++ gpio_direction_input(pdata->right);
++
++ /* Mouse buttons, not required, but should at least have bleft. */
++ if (pdata->bleft >= 0) {
++ ret = gpio_request(pdata->bleft, "gpio_mouse_bleft");
++ if (ret) {
++ dev_dbg(&pdev->dev, "fail bleft pin\n");
++ goto out_gpio_bleft;
++ }
++ gpio_direction_input(pdata->bleft);
++ } else {
++ dev_dbg(&pdev->dev, "no left button defined\n");
++ }
++ if (pdata->bmiddle >= 0) {
++ ret = gpio_request(pdata->bmiddle, "gpio_mouse_bmiddle");
++ if (ret) {
++ dev_dbg(&pdev->dev, "fail bmiddle pin\n");
++ goto out_gpio_bmiddle;
++ }
++ gpio_direction_input(pdata->bmiddle);
++ }
++ if (pdata->bright >= 0) {
++ ret = gpio_request(pdata->bright, "gpio_mouse_bright");
++ if (ret) {
++ dev_dbg(&pdev->dev, "fail bright pin\n");
++ goto out_gpio_bright;
++ }
++ gpio_direction_input(pdata->bright);
++ }
++
++ input = input_allocate_device();
++ if (!input) {
++ dev_dbg(&pdev->dev, "not enough memory for input device\n");
++ ret = -ENOMEM;
++ goto out_input_allocate;
++ }
++
++ platform_set_drvdata(pdev, input);
++
++ input->name = pdev->name;
++ /* TODO: change to "input->dev.parent = &pdev->dev;" in the future */
++ input->cdev.dev = &pdev->dev;
++ input->private = gmouse;
++
++ input->id.bustype = BUS_HOST;
++ input->id.vendor = 0;
++ input->id.product = 0;
++ input->id.version = 0;
++
++ input->evbit[0] = BIT(EV_REL);
++ if (pdata->bleft >= 0 || pdata->bmiddle >= 0 || pdata->bright >= 0) {
++ input->evbit[0] |= BIT(EV_KEY);
++
++ if (pdata->bleft >= 0)
++ input->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT);
++ if (pdata->bmiddle >= 0)
++ input->keybit[LONG(BTN_MOUSE)] |= BIT(BTN_MIDDLE);
++ if (pdata->bright >= 0)
++ input->keybit[LONG(BTN_MOUSE)] |= BIT(BTN_RIGHT);
++ }
++ input->relbit[0] = BIT(REL_X) | BIT(REL_Y);
++
++ input->open = gpio_mouse_open;
++ input->close = gpio_mouse_close;
++
++ gmouse->gpio = pdata;
++ gmouse->input = input;
++
++ /* Init the scan timer. TODO: rewrite to use input-polldev in the future */
++ init_timer(&gmouse->timer);
++ gmouse->timer.function = gpio_mouse_scan;
++
++ ret = input_register_device(input);
++ if (ret) {
++ dev_dbg(&pdev->dev, "could not register input device\n");
++ goto out_reg_dev;
++ }
++
++ dev_dbg(&pdev->dev, "%d ms scan time, buttons: %s%s%s\n",
++ pdata->scan_ms,
++ pdata->bleft < 0 ? "" : "left ",
++ pdata->bmiddle < 0 ? "" : "middle ",
++ pdata->bright < 0 ? "" : "right");
++
++ return 0;
++
++out_reg_dev:
++ input_free_device(input);
++ platform_set_drvdata(pdev, NULL);
++out_input_allocate:
++ if (pdata->bright >= 0)
++ gpio_free(pdata->bright);
++out_gpio_bright:
++ if (pdata->bmiddle >= 0)
++ gpio_free(pdata->bmiddle);
++out_gpio_bmiddle:
++ if (pdata->bleft >= 0)
++ gpio_free(pdata->bleft);
++out_gpio_bleft:
++ if (pdata->right >= 0)
++ gpio_free(pdata->right);
++out_gpio_right:
++ if (pdata->left >= 0)
++ gpio_free(pdata->left);
++out_gpio_left:
++ if (pdata->down >= 0)
++ gpio_free(pdata->down);
++out_gpio_down:
++ if (pdata->up >= 0)
++ gpio_free(pdata->up);
++out_gpio_up:
++ kfree(gmouse);
++out:
++ return ret;
++}
++
++static int __exit gpio_mouse_remove(struct platform_device *pdev)
++{
++ struct input_dev *input = platform_get_drvdata(pdev);
++ struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data;
++ struct gpio_mouse *gmouse = input->private;
++
++ if (input)
++ input_unregister_device(input);
++
++ if (pdata->up >= 0)
++ gpio_free(pdata->up);
++ if (pdata->down >= 0)
++ gpio_free(pdata->down);
++ if (pdata->left >= 0)
++ gpio_free(pdata->left);
++ if (pdata->right >= 0)
++ gpio_free(pdata->right);
++ if (pdata->bleft >= 0)
++ gpio_free(pdata->bleft);
++ if (pdata->bmiddle >= 0)
++ gpio_free(pdata->bmiddle);
++ if (pdata->bright >= 0)
++ gpio_free(pdata->bright);
++
++ if (gmouse)
++ kfree(gmouse);
++
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++
++struct platform_driver gpio_mouse_device_driver = {
++ .remove = __exit_p(gpio_mouse_remove),
++ .driver = {
++ .name = "gpio_mouse",
++ }
++};
++
++static int __init gpio_mouse_init(void)
++{
++ return platform_driver_probe(&gpio_mouse_device_driver,
++ gpio_mouse_probe);
++}
++module_init(gpio_mouse_init);
++
++static void __exit gpio_mouse_exit(void)
++{
++ platform_driver_unregister(&gpio_mouse_device_driver);
++}
++module_exit(gpio_mouse_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("GPIO mouse driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
+index 80b199f..b6fb03b 100644
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -122,4 +122,16 @@ config SONY_LAPTOP
+
+ Read <file:Documentation/sony-laptop.txt> for more information.
+
++config ATMEL_SSC
++ tristate "Device driver for Atmel SSC peripheral"
++ depends on AVR32 || ARCH_AT91
++ ---help---
++ This option enables device driver support for Atmel Syncronized
++ Serial Communication peripheral (SSC).
++
++ The SSC peripheral supports a wide variety of serial frame based
++ communications, i.e. I2S, SPI, etc.
++
++ If unsure, say N.
++
+ endmenu
+diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
+index 7793ccd..03bb556 100644
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -12,3 +12,4 @@ obj-$(CONFIG_TIFM_CORE) += tifm_core.o
+ obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
+ obj-$(CONFIG_SGI_IOC4) += ioc4.o
+ obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
++obj-$(CONFIG_ATMEL_SSC) += atmel-ssc/
+diff --git a/drivers/misc/atmel-ssc/Makefile b/drivers/misc/atmel-ssc/Makefile
+new file mode 100644
+index 0000000..8c45446
+--- /dev/null
++++ b/drivers/misc/atmel-ssc/Makefile
+@@ -0,0 +1,3 @@
++
++obj-$(CONFIG_ATMEL_SSC) := ssc.o
++
+diff --git a/drivers/misc/atmel-ssc/ssc.c b/drivers/misc/atmel-ssc/ssc.c
+new file mode 100644
+index 0000000..a13bd6f
+--- /dev/null
++++ b/drivers/misc/atmel-ssc/ssc.c
+@@ -0,0 +1,471 @@
++/*
++ * Atmel SSC support
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/clk.h>
++#include <linux/ssc.h>
++#include <linux/err.h>
++#include <linux/mutex.h>
++
++#include <asm/io.h>
++
++#define MAX_NR_SSC_DEVICES 4
++
++DEFINE_MUTEX(user_mutex);
++
++static struct ssc_device ssc_dev[MAX_NR_SSC_DEVICES];
++
++/* SSC API */
++
++struct ssc_device* ssc_request(unsigned int ssc_num)
++{
++ struct ssc_device *ssc;
++
++ ssc = &ssc_dev[ssc_num];
++ if (!ssc)
++ return ERR_PTR(-ENODEV);
++
++ /* Lock, check if we are taken and return BUSY if taken */
++ mutex_lock(&user_mutex);
++ if (ssc->user) {
++ mutex_unlock(&user_mutex);
++ printk(KERN_ERR
++ "%s: attempted to request taken ssc%u module\n",
++ ssc->name, ssc_num);
++ return ERR_PTR(-EBUSY);
++ }
++ ssc->user++;
++ mutex_unlock(&user_mutex);
++
++ /* turn on the module */
++ clk_enable(ssc->clk);
++
++ return ssc;
++}
++EXPORT_SYMBOL(ssc_request);
++
++void ssc_free(struct ssc_device *ssc)
++{
++ mutex_lock(&user_mutex);
++ if (ssc->user) {
++ ssc->user--;
++ /* turn off the module */
++ clk_disable(ssc->clk);
++ } else {
++ printk(KERN_WARNING
++ "%s: attempted to free already free ssc module\n",
++ ssc->name);
++ }
++ mutex_unlock(&user_mutex);
++}
++EXPORT_SYMBOL(ssc_free);
++
++int ssc_set_mode(struct ssc_device *ssc, struct ssc_mode *mode)
++{
++ ssc_writel(ssc, CR, SSC_BIT(CR_SWRST));
++
++ if (!mode)
++ return -EINVAL;
++ if (mode->bauddiv % 2)
++ return -EINVAL; /* not power of 2 */
++
++ switch (mode->mode) {
++ case ATMEL_SSC_MODE_I2S_MASTER:
++ if (mode->data_length % 2)
++ return -EINVAL; /* not power of 2 */
++
++ ssc_writel(ssc, CMR, (mode->bauddiv / 2));
++
++ /* Continous clock output
++ * Starts on falling TF
++ * Delay 1 cycle (1 bit)
++ */
++ ssc_writel(ssc, TCMR, SSC_BF(TCMR_CKO, 1)
++ | SSC_BF(TCMR_START, 4)
++ | SSC_BF(TCMR_STTDLY, 1)
++ | SSC_BF(TCMR_PERIOD,
++ (mode->data_length-1)));
++ /* Transmitt MSB first
++ * Transmit 2 words each transfer
++ * Frame starts on negative pulse
++ */
++ ssc_writel(ssc, TFMR,
++ SSC_BF(TFMR_DATLEN,
++ (mode->data_length-1))
++ | SSC_BIT(TFMR_MSBF)
++ | SSC_BF(TFMR_DATNB, 1)
++ | SSC_BF(TFMR_FSLEN,
++ (mode->data_length-1))
++ | SSC_BF(TFMR_FSOS, 1));
++ /* Use transmitter clock
++ * Invert clock
++ * Start on any edge on RF
++ * Delay 1 cycle (1 bit)
++ */
++ ssc_writel(ssc, RCMR, SSC_BF(RCMR_CKS, 1)
++ | SSC_BIT(RCMR_CKI)
++ | SSC_BF(RCMR_START, 7)
++ | SSC_BF(RCMR_STTDLY, 1));
++ /* Receive MSB first */
++ ssc_writel(ssc, RFMR,
++ SSC_BF(RFMR_DATLEN, (mode->data_length-1))
++ | SSC_BIT(RFMR_MSBF));
++ break;
++ case ATMEL_SSC_MODE_I2S_SLAVE:
++ if (mode->data_length % 2)
++ return -EINVAL; /* not power of 2 */
++
++ ssc_writel(ssc, CMR, 0);
++
++ /* Continous clock input on TK
++ * Starts on any TF edge
++ * Delay 1 cycle (1 bit)
++ */
++ ssc_writel(ssc, TCMR, SSC_BF(TCMR_CKS, 2)
++ | SSC_BF(TCMR_START, 7)
++ | SSC_BF(TCMR_STTDLY, 1));
++ /* Transmitt MSB first
++ * Transmit 2 words each transfer
++ * Frame starts on negative pulse
++ */
++ ssc_writel(ssc, TFMR,
++ SSC_BF(TFMR_DATLEN,
++ (mode->data_length-1))
++ | SSC_BIT(TFMR_MSBF)
++ | SSC_BF(TFMR_DATNB, 1)
++ | SSC_BF(TFMR_FSLEN,
++ (mode->data_length-1))
++ | SSC_BF(TFMR_FSOS, 1));
++ /* Continous clock input on RK
++ * Start on any RF edge
++ * Delay 1 cycle (1 bit)
++ */
++ ssc_writel(ssc, RCMR, SSC_BF(RCMR_CKS, 2)
++ | SSC_BF(RCMR_START, 7)
++ | SSC_BF(RCMR_STTDLY, 1));
++ /* Receive MSB first */
++ ssc_writel(ssc, RFMR,
++ SSC_BF(RFMR_DATLEN, (mode->data_length-1))
++ | SSC_BIT(RFMR_MSBF));
++ break;
++ case ATMEL_SSC_MODE_SPI_MASTER:
++ if (mode->data_length < 8 || mode->data_length > 16)
++ return -EINVAL;
++
++ ssc_writel(ssc, CMR, (mode->bauddiv / 2));
++
++ /* Clock during xfer
++ * Invert depending on SPI mode
++ * Continous clock gating
++ */
++ ssc_writel(ssc, TCMR, SSC_BF(TCMR_CKO, 2)
++ | SSC_BF(TCMR_CKI, (mode->spi_mode % 2) ? 0 : 1)
++ | SSC_BF(TCMR_CKG, 1));
++ /* Transmitt MSB first
++ * Frame starts on negative edge
++ */
++ ssc_writel(ssc, TFMR,
++ SSC_BF(TFMR_DATLEN, (mode->data_length-1))
++ | SSC_BIT(TFMR_MSBF)
++ | SSC_BF(TFMR_FSOS, 3));
++ /* Invert depending on SPI mode
++ * Start receive on transmitt
++ */
++ ssc_writel(ssc, RCMR,
++ SSC_BF(RCMR_CKI, (mode->spi_mode % 2) ? 0 : 1)
++ | SSC_BF(RCMR_START, 1));
++ /* Reveice MSB first */
++ ssc_writel(ssc, RFMR,
++ SSC_BF(RFMR_DATLEN, (mode->data_length-1))
++ | SSC_BIT(RFMR_MSBF));
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ return 0;
++}
++EXPORT_SYMBOL(ssc_set_mode);
++
++int ssc_set_rx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer)
++{
++ if (xfer->data) {
++ ssc_writel(ssc, PDC_RPR, xfer->data);
++ ssc_writel(ssc, PDC_RCR, xfer->len);
++ }
++ if (xfer->next_data) {
++ ssc_writel(ssc, PDC_RNPR, xfer->next_data);
++ ssc_writel(ssc, PDC_RNCR, xfer->next_len);
++ }
++
++ return 0;
++}
++EXPORT_SYMBOL(ssc_set_rx_buffers);
++
++int ssc_get_rx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer)
++{
++ xfer->data = ssc_readl(ssc, PDC_RPR);
++ xfer->len = ssc_readl(ssc, PDC_RCR);
++ xfer->next_data = ssc_readl(ssc, PDC_RNPR);
++ xfer->next_len = ssc_readl(ssc, PDC_RNCR);
++
++ return 0;
++}
++EXPORT_SYMBOL(ssc_get_rx_buffers);
++
++int ssc_set_tx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer)
++{
++ if (xfer->data) {
++ ssc_writel(ssc, PDC_TPR, xfer->data);
++ ssc_writel(ssc, PDC_TCR, xfer->len);
++ }
++ if (xfer->next_data) {
++ ssc_writel(ssc, PDC_TNPR, xfer->next_data);
++ ssc_writel(ssc, PDC_TNCR, xfer->next_len);
++ }
++
++ return 0;
++}
++EXPORT_SYMBOL(ssc_set_tx_buffers);
++
++int ssc_get_tx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer)
++{
++ xfer->data = ssc_readl(ssc, PDC_TPR);
++ xfer->len = ssc_readl(ssc, PDC_TCR);
++ xfer->next_data = ssc_readl(ssc, PDC_TNPR);
++ xfer->next_len = ssc_readl(ssc, PDC_TNCR);
++
++ return 0;
++}
++EXPORT_SYMBOL(ssc_get_tx_buffers);
++
++int ssc_enable(struct ssc_device *ssc, char tx, char rx)
++{
++ if (tx && rx) {
++ ssc_writel(ssc, CR, SSC_BIT(CR_TXEN)|SSC_BIT(CR_RXEN));
++ }
++ else if (tx) {
++ ssc_writel(ssc, CR, SSC_BIT(CR_TXEN));
++ }
++ else if (rx) {
++ ssc_writel(ssc, CR, SSC_BIT(CR_RXEN));
++ }
++ return 0;
++}
++EXPORT_SYMBOL(ssc_enable);
++
++int ssc_enable_xfer(struct ssc_device *ssc, char tx, char rx)
++{
++ if (tx && rx) {
++ ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTEN)|SSC_BIT(PDC_PTCR_RXTEN));
++ }
++ else if (tx) {
++ ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTEN));
++ }
++ else if (rx) {
++ ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_RXTEN));
++ }
++ return 0;
++}
++EXPORT_SYMBOL(ssc_enable_xfer);
++
++int ssc_disable(struct ssc_device *ssc, char tx, char rx)
++{
++ if (tx && rx) {
++ ssc_writel(ssc, CR, SSC_BIT(CR_TXDIS)|SSC_BIT(CR_RXDIS));
++ }
++ else if (tx) {
++ ssc_writel(ssc, CR, SSC_BIT(CR_TXDIS));
++ }
++ else if (rx) {
++ ssc_writel(ssc, CR, SSC_BIT(CR_RXDIS));
++ }
++ return 0;
++}
++EXPORT_SYMBOL(ssc_disable);
++
++int ssc_disable_xfer(struct ssc_device *ssc, char tx, char rx)
++{
++ if (tx && rx) {
++ ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTDIS)|SSC_BIT(PDC_PTCR_RXTDIS));
++ }
++ else if (tx) {
++ ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTDIS));
++ }
++ else if (rx) {
++ ssc_writel(ssc, PDC_PTCR, SSC_BIT(PDC_PTCR_RXTDIS));
++ }
++ return 0;
++}
++EXPORT_SYMBOL(ssc_disable_xfer);
++
++int ssc_enable_int(struct ssc_device *ssc, unsigned int mask)
++{
++ long status;
++
++ ssc_writel(ssc, IER, mask);
++
++ status = ssc_readl(ssc, IMR);
++
++ if (!(status & mask))
++ return -EFAULT;
++
++ return 0;
++}
++EXPORT_SYMBOL(ssc_enable_int);
++
++int ssc_disable_int(struct ssc_device *ssc, unsigned int mask)
++{
++ long status;
++
++ ssc_writel(ssc, IDR, mask);
++
++ status = ssc_readl(ssc, IMR);
++
++ if (status ^ ~mask)
++ return -EFAULT;
++
++ return 0;
++}
++EXPORT_SYMBOL(ssc_disable_int);
++
++int ssc_get_int_mask(struct ssc_device *ssc, unsigned int *mask)
++{
++ *mask = ssc_readl(ssc, IMR);
++ return 0;
++}
++EXPORT_SYMBOL(ssc_get_int_mask);
++
++int ssc_clk_get_rate(struct ssc_device *ssc)
++{
++ return clk_get_rate(ssc->clk);
++}
++EXPORT_SYMBOL(ssc_clk_get_rate);
++
++int ssc_to_irq(struct ssc_device *ssc)
++{
++ return ssc->irq;
++}
++EXPORT_SYMBOL(ssc_to_irq);
++
++struct ssc_device* irq_to_ssc(unsigned int irq)
++{
++ int i;
++ struct ssc_device *ssc;
++
++ for (i = 0; i < MAX_NR_SSC_DEVICES; i++) {
++ ssc = &ssc_dev[i];
++ if (ssc && ssc->irq == irq)
++ return ssc;
++ }
++
++ return ERR_PTR(-ENXIO);
++}
++EXPORT_SYMBOL(irq_to_ssc);
++
++/* End SSC API */
++
++static int __init ssc_probe(struct platform_device *pdev)
++{
++ int retval = 0;
++ struct resource *regs;
++ struct ssc_device *ssc = NULL;
++
++ if (pdev->id > MAX_NR_SSC_DEVICES) {
++ dev_err(&pdev->dev, "only %d SSC devices supported\n",
++ MAX_NR_SSC_DEVICES);
++ retval = -ENODEV;
++ goto out;
++ }
++
++ ssc = &ssc_dev[pdev->id];
++ ssc->user = 0;
++ snprintf(ssc->name, sizeof(ssc->name), "ssc%d", pdev->id);
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs) {
++ dev_err(&pdev->dev, "no mmio resource defined for %s\n",
++ ssc->name);
++ retval = -ENXIO;
++ goto out;
++ }
++
++ ssc->clk = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(ssc->clk)) {
++ dev_err(&pdev->dev, "no pclk clock defined for %s\n",
++ ssc->name);
++ retval = -ENXIO;
++ goto out;
++ }
++
++ ssc->pdev = pdev;
++ ssc->regs = ioremap(regs->start, regs->end - regs->start + 1);
++
++ mutex_init(&user_mutex);
++
++ /* disable all interrupts */
++ ssc_writel(ssc, IDR, ~0UL);
++ ssc_readl(ssc, SR);
++
++ ssc->irq = platform_get_irq(pdev, 0);
++ if (!ssc->irq) {
++ printk(KERN_ERR "%s: no interrupt for module\n", ssc->name);
++ retval = -ENXIO;
++ goto out_unmap;
++ }
++
++ platform_set_drvdata(pdev, ssc);
++
++ printk(KERN_INFO "%s: Atmel SSC module at 0x%08lx (irq %d)\n",
++ ssc->name, (unsigned long)ssc->regs, ssc->irq);
++
++ goto out;
++
++out_unmap:
++ iounmap(ssc->regs);
++out:
++ return retval;
++}
++
++static int __devexit ssc_remove(struct platform_device *pdev)
++{
++ struct ssc_device *ssc = platform_get_drvdata(pdev);
++
++ if (ssc && ssc->regs)
++ iounmap(ssc->regs);
++ if (ssc && ssc->clk)
++ clk_put(ssc->clk);
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++
++static struct platform_driver ssc_driver = {
++ .remove = __devexit_p(ssc_remove),
++ .driver = {
++ .name = "ssc",
++ },
++};
++
++static int __init ssc_init(void)
++{
++ return platform_driver_probe(&ssc_driver, ssc_probe);
++}
++
++static void __exit ssc_exit(void)
++{
++ platform_driver_unregister(&ssc_driver);
++}
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("SSC driver for AVR32 capable of I2S and SPI master (todo)");
++MODULE_LICENSE("GPL");
++
++module_init(ssc_init);
++module_exit(ssc_exit);
+diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
+index 12af9c7..6514159 100644
+--- a/drivers/mmc/Kconfig
++++ b/drivers/mmc/Kconfig
+@@ -71,6 +71,16 @@ config MMC_OMAP
+
+ If unsure, say N.
+
++config MMC_ATMELMCI
++ tristate "Atmel Multimedia Card Interface support"
++ depends on AVR32 && MMC
++ help
++ This selects the Atmel Multimedia Card Interface. If you have
++ a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
++ slot, say Y or M here.
++
++ If unsure, say N.
++
+ config MMC_WBSD
+ tristate "Winbond W83L51xD SD/MMC Card Interface support"
+ depends on MMC && ISA_DMA_API
+diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
+index 83ffb93..caf30e0 100644
+--- a/drivers/mmc/Makefile
++++ b/drivers/mmc/Makefile
+@@ -23,6 +23,7 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o
+ obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP) += omap.o
+ obj-$(CONFIG_MMC_AT91) += at91_mci.o
++obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
+ obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
+
+ mmc_core-y := mmc.o mmc_sysfs.o
+diff --git a/drivers/mmc/atmel-mci.c b/drivers/mmc/atmel-mci.c
+new file mode 100644
+index 0000000..ebeab32
+--- /dev/null
++++ b/drivers/mmc/atmel-mci.c
+@@ -0,0 +1,1218 @@
++/*
++ * Atmel MultiMedia Card Interface driver
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/blkdev.h>
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/ioport.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <linux/mmc/host.h>
++#include <linux/mmc/protocol.h>
++
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++#include "atmel-mci.h"
++
++#define DRIVER_NAME "atmel_mci"
++
++#define MCI_CMD_ERROR_FLAGS (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | \
++ MCI_BIT(RCRCE) | MCI_BIT(RENDE) | \
++ MCI_BIT(RTOE))
++#define MCI_DATA_ERROR_FLAGS (MCI_BIT(DCRCE) | MCI_BIT(DTOE) | \
++ MCI_BIT(OVRE) | MCI_BIT(UNRE))
++
++enum {
++ EVENT_CMD_COMPLETE = 0,
++ EVENT_CMD_ERROR,
++ EVENT_DATA_COMPLETE,
++ EVENT_DATA_ERROR,
++ EVENT_STOP_SENT,
++ EVENT_STOP_COMPLETE,
++ EVENT_STOP_ERROR,
++ EVENT_DMA_ERROR,
++ EVENT_CARD_DETECT,
++};
++
++struct atmel_mci_dma {
++ struct dma_request_sg req;
++ unsigned short rx_periph_id;
++ unsigned short tx_periph_id;
++};
++
++struct atmel_mci {
++ struct mmc_host *mmc;
++ void __iomem *regs;
++ struct atmel_mci_dma dma;
++
++ struct mmc_request *mrq;
++ struct mmc_command *cmd;
++ struct mmc_data *data;
++
++ u32 stop_cmdr;
++ u32 stop_iflags;
++
++ struct tasklet_struct tasklet;
++ unsigned long pending_events;
++ unsigned long completed_events;
++ u32 error_status;
++
++ int present;
++ int detect_pin;
++ int wp_pin;
++
++ unsigned long bus_hz;
++ unsigned long mapbase;
++ struct clk *mck;
++ struct platform_device *pdev;
++
++#ifdef CONFIG_DEBUG_FS
++ struct dentry *debugfs_root;
++ struct dentry *debugfs_regs;
++ struct dentry *debugfs_req;
++ struct dentry *debugfs_pending_events;
++ struct dentry *debugfs_completed_events;
++#endif
++};
++
++/* Those printks take an awful lot of time... */
++#ifndef DEBUG
++static unsigned int fmax = 15000000U;
++#else
++static unsigned int fmax = 1000000U;
++#endif
++module_param(fmax, uint, 0444);
++MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
++
++/* Test bit macros for completed events */
++#define mci_cmd_is_complete(host) \
++ test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_cmd_error_is_complete(host) \
++ test_bit(EVENT_CMD_ERROR, &host->completed_events)
++#define mci_data_is_complete(host) \
++ test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_data_error_is_complete(host) \
++ test_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_stop_sent_is_complete(host) \
++ test_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_stop_is_complete(host) \
++ test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_stop_error_is_complete(host) \
++ test_bit(EVENT_STOP_ERROR, &host->completed_events)
++#define mci_dma_error_is_complete(host) \
++ test_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_card_detect_is_complete(host) \
++ test_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Test and clear bit macros for pending events */
++#define mci_clear_cmd_is_pending(host) \
++ test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_clear_cmd_error_is_pending(host) \
++ test_and_clear_bit(EVENT_CMD_ERROR, &host->pending_events)
++#define mci_clear_data_is_pending(host) \
++ test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_clear_data_error_is_pending(host) \
++ test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_clear_stop_sent_is_pending(host) \
++ test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_clear_stop_is_pending(host) \
++ test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_clear_stop_error_is_pending(host) \
++ test_and_clear_bit(EVENT_STOP_ERROR, &host->pending_events)
++#define mci_clear_dma_error_is_pending(host) \
++ test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_clear_card_detect_is_pending(host) \
++ test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++/* Test and set bit macros for completed events */
++#define mci_set_cmd_is_completed(host) \
++ test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_set_cmd_error_is_completed(host) \
++ test_and_set_bit(EVENT_CMD_ERROR, &host->completed_events)
++#define mci_set_data_is_completed(host) \
++ test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_set_data_error_is_completed(host) \
++ test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_set_stop_sent_is_completed(host) \
++ test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_set_stop_is_completed(host) \
++ test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_stop_error_is_completed(host) \
++ test_and_set_bit(EVENT_STOP_ERROR, &host->completed_events)
++#define mci_set_dma_error_is_completed(host) \
++ test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_set_card_detect_is_completed(host) \
++ test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Set bit macros for completed events */
++#define mci_set_cmd_complete(host) \
++ set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_set_cmd_error_complete(host) \
++ set_bit(EVENT_CMD_ERROR, &host->completed_events)
++#define mci_set_data_complete(host) \
++ set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_set_data_error_complete(host) \
++ set_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_set_stop_sent_complete(host) \
++ set_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_set_stop_complete(host) \
++ set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_stop_error_complete(host) \
++ set_bit(EVENT_STOP_ERROR, &host->completed_events)
++#define mci_set_dma_error_complete(host) \
++ set_bit(EVENT_DMA_ERROR, &host->completed_events)
++#define mci_set_card_detect_complete(host) \
++ set_bit(EVENT_CARD_DETECT, &host->completed_events)
++
++/* Set bit macros for pending events */
++#define mci_set_cmd_pending(host) \
++ set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_set_cmd_error_pending(host) \
++ set_bit(EVENT_CMD_ERROR, &host->pending_events)
++#define mci_set_data_pending(host) \
++ set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_set_data_error_pending(host) \
++ set_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_set_stop_sent_pending(host) \
++ set_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_set_stop_pending(host) \
++ set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_set_stop_error_pending(host) \
++ set_bit(EVENT_STOP_ERROR, &host->pending_events)
++#define mci_set_dma_error_pending(host) \
++ set_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_set_card_detect_pending(host) \
++ set_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++/* Clear bit macros for pending events */
++#define mci_clear_cmd_pending(host) \
++ clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_clear_cmd_error_pending(host) \
++ clear_bit(EVENT_CMD_ERROR, &host->pending_events)
++#define mci_clear_data_pending(host) \
++ clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_clear_data_error_pending(host) \
++ clear_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_clear_stop_sent_pending(host) \
++ clear_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_clear_stop_pending(host) \
++ clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_clear_stop_error_pending(host) \
++ clear_bit(EVENT_STOP_ERROR, &host->pending_events)
++#define mci_clear_dma_error_pending(host) \
++ clear_bit(EVENT_DMA_ERROR, &host->pending_events)
++#define mci_clear_card_detect_pending(host) \
++ clear_bit(EVENT_CARD_DETECT, &host->pending_events)
++
++
++#ifdef CONFIG_DEBUG_FS
++#include <linux/debugfs.h>
++
++#define DBG_REQ_BUF_SIZE (4096 - sizeof(unsigned int))
++
++struct req_dbg_data {
++ unsigned int nbytes;
++ char str[DBG_REQ_BUF_SIZE];
++};
++
++static int req_dbg_open(struct inode *inode, struct file *file)
++{
++ struct atmel_mci *host;
++ struct mmc_request *mrq;
++ struct mmc_command *cmd, *stop;
++ struct mmc_data *data;
++ struct req_dbg_data *priv;
++ char *str;
++ unsigned long n = 0;
++
++ priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
++ if (!priv)
++ return -ENOMEM;
++ str = priv->str;
++
++ mutex_lock(&inode->i_mutex);
++ host = inode->i_private;
++
++ spin_lock_irq(&host->mmc->lock);
++ mrq = host->mrq;
++ if (mrq) {
++ cmd = mrq->cmd;
++ data = mrq->data;
++ stop = mrq->stop;
++ n = snprintf(str, DBG_REQ_BUF_SIZE,
++ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
++ cmd->opcode, cmd->arg, cmd->flags,
++ cmd->resp[0], cmd->resp[1], cmd->resp[2],
++ cmd->resp[3], cmd->error);
++ if (n < DBG_REQ_BUF_SIZE && data)
++ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
++ "DATA %u * %u (%u) %x (err %u)\n",
++ data->blocks, data->blksz,
++ data->bytes_xfered, data->flags,
++ data->error);
++ if (n < DBG_REQ_BUF_SIZE && stop)
++ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
++ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
++ stop->opcode, stop->arg, stop->flags,
++ stop->resp[0], stop->resp[1],
++ stop->resp[2], stop->resp[3],
++ stop->error);
++ }
++ spin_unlock_irq(&host->mmc->lock);
++ mutex_unlock(&inode->i_mutex);
++
++ priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
++ file->private_data = priv;
++
++ return 0;
++}
++
++static ssize_t req_dbg_read(struct file *file, char __user *buf,
++ size_t nbytes, loff_t *ppos)
++{
++ struct req_dbg_data *priv = file->private_data;
++
++ return simple_read_from_buffer(buf, nbytes, ppos,
++ priv->str, priv->nbytes);
++}
++
++static int req_dbg_release(struct inode *inode, struct file *file)
++{
++ kfree(file->private_data);
++ return 0;
++}
++
++static const struct file_operations req_dbg_fops = {
++ .owner = THIS_MODULE,
++ .open = req_dbg_open,
++ .llseek = no_llseek,
++ .read = req_dbg_read,
++ .release = req_dbg_release,
++};
++
++static int regs_dbg_open(struct inode *inode, struct file *file)
++{
++ struct atmel_mci *host;
++ unsigned int i;
++ u32 *data;
++ int ret = -ENOMEM;
++
++ mutex_lock(&inode->i_mutex);
++ host = inode->i_private;
++ data = kmalloc(inode->i_size, GFP_KERNEL);
++ if (!data)
++ goto out;
++
++ spin_lock_irq(&host->mmc->lock);
++ for (i = 0; i < inode->i_size / 4; i++)
++ data[i] = __raw_readl(host->regs + i * 4);
++ spin_unlock_irq(&host->mmc->lock);
++
++ file->private_data = data;
++ ret = 0;
++
++out:
++ mutex_unlock(&inode->i_mutex);
++
++ return ret;
++}
++
++static ssize_t regs_dbg_read(struct file *file, char __user *buf,
++ size_t nbytes, loff_t *ppos)
++{
++ struct inode *inode = file->f_dentry->d_inode;
++ int ret;
++
++ mutex_lock(&inode->i_mutex);
++ ret = simple_read_from_buffer(buf, nbytes, ppos,
++ file->private_data,
++ file->f_dentry->d_inode->i_size);
++ mutex_unlock(&inode->i_mutex);
++
++ return ret;
++}
++
++static int regs_dbg_release(struct inode *inode, struct file *file)
++{
++ kfree(file->private_data);
++ return 0;
++}
++
++static const struct file_operations regs_dbg_fops = {
++ .owner = THIS_MODULE,
++ .open = regs_dbg_open,
++ .llseek = generic_file_llseek,
++ .read = regs_dbg_read,
++ .release = regs_dbg_release,
++};
++
++static void atmci_init_debugfs(struct atmel_mci *host)
++{
++ struct mmc_host *mmc;
++ struct dentry *root, *regs;
++ struct resource *res;
++
++ mmc = host->mmc;
++ root = debugfs_create_dir(mmc_hostname(mmc), NULL);
++ if (IS_ERR(root) || !root)
++ goto err_root;
++ host->debugfs_root = root;
++
++ regs = debugfs_create_file("regs", 0400, root, host, &regs_dbg_fops);
++ if (!regs)
++ goto err_regs;
++
++ res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
++ regs->d_inode->i_size = res->end - res->start + 1;
++ host->debugfs_regs = regs;
++
++ host->debugfs_req = debugfs_create_file("req", 0400, root,
++ host, &req_dbg_fops);
++ if (!host->debugfs_req)
++ goto err_req;
++
++ host->debugfs_pending_events
++ = debugfs_create_u32("pending_events", 0400, root,
++ (u32 *)&host->pending_events);
++ if (!host->debugfs_pending_events)
++ goto err_pending_events;
++
++ host->debugfs_completed_events
++ = debugfs_create_u32("completed_events", 0400, root,
++ (u32 *)&host->completed_events);
++ if (!host->debugfs_completed_events)
++ goto err_completed_events;
++
++ return;
++
++err_completed_events:
++ debugfs_remove(host->debugfs_pending_events);
++err_pending_events:
++ debugfs_remove(host->debugfs_req);
++err_req:
++ debugfs_remove(host->debugfs_regs);
++err_regs:
++ debugfs_remove(host->debugfs_root);
++err_root:
++ host->debugfs_root = NULL;
++ dev_err(&host->pdev->dev,
++ "failed to initialize debugfs for %s\n",
++ mmc_hostname(mmc));
++}
++
++static void atmci_cleanup_debugfs(struct atmel_mci *host)
++{
++ if (host->debugfs_root) {
++ debugfs_remove(host->debugfs_completed_events);
++ debugfs_remove(host->debugfs_pending_events);
++ debugfs_remove(host->debugfs_req);
++ debugfs_remove(host->debugfs_regs);
++ debugfs_remove(host->debugfs_root);
++ host->debugfs_root = NULL;
++ }
++}
++#else
++static inline void atmci_init_debugfs(struct atmel_mci *host)
++{
++
++}
++
++static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
++{
++
++}
++#endif /* CONFIG_DEBUG_FS */
++
++static inline unsigned int ns_to_clocks(struct atmel_mci *host,
++ unsigned int ns)
++{
++ return (ns * (host->bus_hz / 1000000) + 999) / 1000;
++}
++
++static void atmci_set_timeout(struct atmel_mci *host,
++ struct mmc_data *data)
++{
++ static unsigned dtomul_to_shift[] = {
++ 0, 4, 7, 8, 10, 12, 16, 20
++ };
++ unsigned timeout;
++ unsigned dtocyc, dtomul;
++
++ timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
++
++ for (dtomul = 0; dtomul < 8; dtomul++) {
++ unsigned shift = dtomul_to_shift[dtomul];
++ dtocyc = (timeout + (1 << shift) - 1) >> shift;
++ if (dtocyc < 15)
++ break;
++ }
++
++ if (dtomul >= 8) {
++ dtomul = 7;
++ dtocyc = 15;
++ }
++
++ pr_debug("%s: setting timeout to %u cycles\n",
++ mmc_hostname(host->mmc),
++ dtocyc << dtomul_to_shift[dtomul]);
++ mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
++ | MCI_BF(DTOCYC, dtocyc)));
++}
++
++/*
++ * Return mask with interrupt flags to be handled for this command.
++ */
++static u32 atmci_prepare_command(struct mmc_host *mmc,
++ struct mmc_command *cmd,
++ u32 *cmd_flags)
++{
++ u32 cmdr;
++ u32 iflags;
++
++ cmd->error = MMC_ERR_NONE;
++
++ cmdr = 0;
++ BUG_ON(MCI_BFEXT(CMDNB, cmdr) != 0);
++ cmdr = MCI_BFINS(CMDNB, cmd->opcode, cmdr);
++
++ if (cmd->flags & MMC_RSP_PRESENT) {
++ if (cmd->flags & MMC_RSP_136)
++ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
++ else
++ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
++ }
++
++ /*
++ * This should really be MAXLAT_5 for CMD2 and ACMD41, but
++ * it's too difficult to determine whether this is an ACMD or
++ * not. Better make it 64.
++ */
++ cmdr |= MCI_BIT(MAXLAT);
++
++ if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
++ cmdr |= MCI_BIT(OPDCMD);
++
++ iflags = MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS;
++ if (!(cmd->flags & MMC_RSP_CRC))
++ iflags &= ~MCI_BIT(RCRCE);
++
++ pr_debug("%s: cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
++ mmc_hostname(mmc), cmd->opcode, cmd->arg, cmd->flags,
++ (unsigned long)cmdr);
++
++ *cmd_flags = cmdr;
++ return iflags;
++}
++
++static void atmci_start_command(struct atmel_mci *host,
++ struct mmc_command *cmd,
++ u32 cmd_flags)
++{
++ WARN_ON(host->cmd);
++ host->cmd = cmd;
++
++ mci_writel(host, ARGR, cmd->arg);
++ mci_writel(host, CMDR, cmd_flags);
++
++ if (cmd->data)
++ dma_start_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++}
++
++/*
++ * Returns a mask of flags to be set in the command register when the
++ * command to start the transfer is to be sent.
++ */
++static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++ u32 cmd_flags;
++
++ WARN_ON(host->data);
++ host->data = data;
++
++ atmci_set_timeout(host, data);
++ mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
++ | MCI_BF(BLKLEN, data->blksz)));
++ host->dma.req.block_size = data->blksz;
++ host->dma.req.nr_blocks = data->blocks;
++
++ cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
++ if (data->flags & MMC_DATA_STREAM)
++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
++ else if (data->blocks > 1)
++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
++ else
++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
++
++ if (data->flags & MMC_DATA_READ) {
++ cmd_flags |= MCI_BIT(TRDIR);
++ host->dma.req.nr_sg
++ = dma_map_sg(&host->pdev->dev, data->sg,
++ data->sg_len, DMA_FROM_DEVICE);
++ host->dma.req.periph_id = host->dma.rx_periph_id;
++ host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
++ host->dma.req.data_reg = host->mapbase + MCI_RDR;
++ } else {
++ host->dma.req.nr_sg
++ = dma_map_sg(&host->pdev->dev, data->sg,
++ data->sg_len, DMA_TO_DEVICE);
++ host->dma.req.periph_id = host->dma.tx_periph_id;
++ host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
++ host->dma.req.data_reg = host->mapbase + MCI_TDR;
++ }
++ host->dma.req.sg = data->sg;
++
++ dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
++
++ return cmd_flags;
++}
++
++static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++ struct mmc_data *data = mrq->data;
++ u32 iflags;
++ u32 cmdflags = 0;
++
++ iflags = mci_readl(host, IMR);
++ if (iflags)
++ printk("WARNING: IMR=0x%08x\n", mci_readl(host, IMR));
++
++ WARN_ON(host->mrq != NULL);
++ host->mrq = mrq;
++ host->pending_events = 0;
++ host->completed_events = 0;
++
++ iflags = atmci_prepare_command(mmc, mrq->cmd, &cmdflags);
++
++ if (mrq->stop) {
++ BUG_ON(!data);
++
++ host->stop_iflags = atmci_prepare_command(mmc, mrq->stop,
++ &host->stop_cmdr);
++ host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
++ if (!(data->flags & MMC_DATA_WRITE))
++ host->stop_cmdr |= MCI_BIT(TRDIR);
++ if (data->flags & MMC_DATA_STREAM)
++ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
++ else
++ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
++ }
++ if (data) {
++ cmdflags |= atmci_prepare_data(mmc, data);
++ iflags |= MCI_DATA_ERROR_FLAGS;
++ }
++
++ atmci_start_command(host, mrq->cmd, cmdflags);
++ mci_writel(host, IER, iflags);
++}
++
++static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++
++ if (ios->clock) {
++ u32 clkdiv;
++
++ clkdiv = host->bus_hz / (2 * ios->clock) - 1;
++ if (clkdiv > 255)
++ clkdiv = 255;
++ mci_writel(host, MR, (clkdiv
++ | MCI_BIT(WRPROOF)
++ | MCI_BIT(RDPROOF)));
++ }
++
++ switch (ios->bus_width) {
++ case MMC_BUS_WIDTH_1:
++ mci_writel(host, SDCR, 0);
++ break;
++ case MMC_BUS_WIDTH_4:
++ mci_writel(host, SDCR, MCI_BIT(SDCBUS));
++ break;
++ }
++
++ switch (ios->power_mode) {
++ case MMC_POWER_OFF:
++ mci_writel(host, CR, MCI_BIT(MCIDIS));
++ break;
++ case MMC_POWER_UP:
++ mci_writel(host, CR, MCI_BIT(SWRST));
++ break;
++ case MMC_POWER_ON:
++ mci_writel(host, CR, MCI_BIT(MCIEN));
++ break;
++ }
++}
++
++static int atmci_get_ro(struct mmc_host *mmc)
++{
++ int read_only = 0;
++ struct atmel_mci *host = mmc_priv(mmc);
++
++ if (host->wp_pin >= 0) {
++ read_only = gpio_get_value(host->wp_pin);
++ pr_debug("%s: card is %s\n", mmc_hostname(mmc),
++ read_only ? "read-only" : "read-write");
++ } else {
++ pr_debug("%s: no pin for checking read-only switch."
++ " Assuming write-enable.\n", mmc_hostname(mmc));
++ }
++
++ return read_only;
++}
++
++static struct mmc_host_ops atmci_ops = {
++ .request = atmci_request,
++ .set_ios = atmci_set_ios,
++ .get_ro = atmci_get_ro,
++};
++
++static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++
++ WARN_ON(host->cmd || host->data);
++ host->mrq = NULL;
++
++ mmc_request_done(mmc, mrq);
++}
++
++static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
++ u32 flags)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++
++ atmci_start_command(host, data->stop, host->stop_cmdr | flags);
++ mci_writel(host, IER, host->stop_iflags);
++}
++
++static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
++{
++ host->data = NULL;
++ dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
++ ((data->flags & MMC_DATA_WRITE)
++ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
++
++ /*
++ * Data might complete before command for very short transfers
++ * (like READ_SCR)
++ */
++ if (mci_cmd_is_complete(host)
++ && (!data->stop || mci_stop_is_complete(host)))
++ atmci_request_end(host->mmc, data->mrq);
++}
++
++static void atmci_command_error(struct mmc_host *mmc,
++ struct mmc_command *cmd,
++ u32 status)
++{
++ pr_debug("%s: command error: status=0x%08x\n",
++ mmc_hostname(mmc), status);
++
++ if (status & MCI_BIT(RTOE))
++ cmd->error = MMC_ERR_TIMEOUT;
++ else if (status & MCI_BIT(RCRCE))
++ cmd->error = MMC_ERR_BADCRC;
++ else
++ cmd->error = MMC_ERR_FAILED;
++}
++
++static void atmci_tasklet_func(unsigned long priv)
++{
++ struct mmc_host *mmc = (struct mmc_host *)priv;
++ struct atmel_mci *host = mmc_priv(mmc);
++ struct mmc_request *mrq = host->mrq;
++ struct mmc_data *data = host->data;
++
++ pr_debug("atmci_tasklet: pending/completed/mask %lx/%lx/%x\n",
++ host->pending_events, host->completed_events,
++ mci_readl(host, IMR));
++
++ if (mci_clear_cmd_error_is_pending(host)) {
++ struct mmc_command *cmd;
++
++ mci_set_cmd_error_complete(host);
++ mci_clear_cmd_pending(host);
++ cmd = host->mrq->cmd;
++
++ if (cmd->data) {
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++ host->data = NULL;
++ }
++
++ atmci_command_error(mmc, cmd, host->error_status);
++ atmci_request_end(mmc, cmd->mrq);
++ }
++ if (mci_clear_stop_error_is_pending(host)) {
++ mci_set_stop_error_complete(host);
++ mci_clear_stop_pending(host);
++ atmci_command_error(mmc, host->mrq->stop,
++ host->error_status);
++ if (!host->data)
++ atmci_request_end(mmc, host->mrq);
++ }
++ if (mci_clear_cmd_is_pending(host)) {
++ mci_set_cmd_complete(host);
++ if (!mrq->data || mci_data_is_complete(host)
++ || mci_data_error_is_complete(host))
++ atmci_request_end(mmc, mrq);
++ }
++ if (mci_clear_stop_is_pending(host)) {
++ mci_set_stop_complete(host);
++ if (mci_data_is_complete(host)
++ || mci_data_error_is_complete(host))
++ atmci_request_end(mmc, mrq);
++ }
++ if (mci_clear_dma_error_is_pending(host)) {
++ mci_set_dma_error_complete(host);
++ mci_clear_data_pending(host);
++
++ /* DMA controller got bus error => invalid address */
++ data->error = MMC_ERR_INVALID;
++
++ printk(KERN_DEBUG "%s: dma error after %u bytes xfered\n",
++ mmc_hostname(mmc), host->data->bytes_xfered);
++
++ if (data->stop
++ && !mci_set_stop_sent_is_completed(host))
++ /* TODO: Check if card is still present */
++ send_stop_cmd(host->mmc, data, 0);
++
++ atmci_data_complete(host, data);
++ }
++ if (mci_clear_data_error_is_pending(host)) {
++ u32 status = host->error_status;
++
++ mci_set_data_error_complete(host);
++ mci_clear_data_pending(host);
++
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++
++ printk(KERN_DEBUG "%s: data error: status=0x%08x\n",
++ mmc_hostname(host->mmc), status);
++
++ if (status & MCI_BIT(DCRCE)) {
++ printk(KERN_DEBUG "%s: Data CRC error\n",
++ mmc_hostname(host->mmc));
++ data->error = MMC_ERR_BADCRC;
++ } else if (status & MCI_BIT(DTOE)) {
++ printk(KERN_DEBUG "%s: Data Timeout error\n",
++ mmc_hostname(host->mmc));
++ data->error = MMC_ERR_TIMEOUT;
++ } else {
++ printk(KERN_DEBUG "%s: Data FIFO error\n",
++ mmc_hostname(host->mmc));
++ data->error = MMC_ERR_FIFO;
++ }
++ printk(KERN_DEBUG "%s: Bytes xfered: %u\n",
++ mmc_hostname(host->mmc), data->bytes_xfered);
++
++ if (data->stop
++ && !mci_set_stop_sent_is_completed(host))
++ /* TODO: Check if card is still present */
++ send_stop_cmd(host->mmc, data, 0);
++
++ atmci_data_complete(host, data);
++ }
++ if (mci_clear_data_is_pending(host)) {
++ mci_set_data_complete(host);
++ data->bytes_xfered = data->blocks * data->blksz;
++ atmci_data_complete(host, data);
++ }
++ if (mci_clear_card_detect_is_pending(host)) {
++ /* Reset controller if card is gone */
++ if (!host->present) {
++ mci_writel(host, CR, MCI_BIT(SWRST));
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CR, MCI_BIT(MCIEN));
++ }
++
++ /* Clean up queue if present */
++ if (mrq) {
++ if (!mci_cmd_is_complete(host)
++ && !mci_cmd_error_is_complete(host)) {
++ mrq->cmd->error = MMC_ERR_TIMEOUT;
++ }
++ if (mrq->data && !mci_data_is_complete(host)
++ && !mci_data_error_is_complete(host)) {
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++ host->data->error = MMC_ERR_TIMEOUT;
++ atmci_data_complete(host, data);
++ }
++ if (mrq->stop && !mci_stop_is_complete(host)
++ && !mci_stop_error_is_complete(host)) {
++ mrq->stop->error = MMC_ERR_TIMEOUT;
++ }
++
++ host->cmd = NULL;
++ atmci_request_end(mmc, mrq);
++ }
++ mmc_detect_change(host->mmc, msecs_to_jiffies(100));
++ }
++}
++
++static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
++ struct mmc_command *cmd = host->cmd;
++
++ /*
++ * Read the response now so that we're free to send a new
++ * command immediately.
++ */
++ cmd->resp[0] = mci_readl(host, RSPR);
++ cmd->resp[1] = mci_readl(host, RSPR);
++ cmd->resp[2] = mci_readl(host, RSPR);
++ cmd->resp[3] = mci_readl(host, RSPR);
++
++ mci_writel(host, IDR, MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS);
++ host->cmd = NULL;
++
++ if (mci_stop_sent_is_complete(host))
++ mci_set_stop_pending(host);
++ else
++ mci_set_cmd_pending(host);
++
++ tasklet_schedule(&host->tasklet);
++}
++
++static void atmci_xfer_complete(struct dma_request *_req)
++{
++ struct dma_request_sg *req = to_dma_request_sg(_req);
++ struct atmel_mci_dma *dma;
++ struct atmel_mci *host;
++ struct mmc_data *data;
++
++ dma = container_of(req, struct atmel_mci_dma, req);
++ host = container_of(dma, struct atmel_mci, dma);
++ data = host->data;
++
++ if (data->stop && !mci_set_stop_sent_is_completed(host))
++ send_stop_cmd(host->mmc, data, 0);
++
++ if (data->flags & MMC_DATA_READ) {
++ mci_writel(host, IDR, MCI_DATA_ERROR_FLAGS);
++ mci_set_data_pending(host);
++ tasklet_schedule(&host->tasklet);
++ } else {
++ /*
++ * For the WRITE case, wait for NOTBUSY. This function
++ * is called when everything has been written to the
++ * controller, not when the card is done programming.
++ */
++ mci_writel(host, IER, MCI_BIT(NOTBUSY));
++ }
++}
++
++static void atmci_dma_error(struct dma_request *_req)
++{
++ struct dma_request_sg *req = to_dma_request_sg(_req);
++ struct atmel_mci_dma *dma;
++ struct atmel_mci *host;
++
++ dma = container_of(req, struct atmel_mci_dma, req);
++ host = container_of(dma, struct atmel_mci, dma);
++
++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS));
++
++ mci_set_dma_error_pending(host);
++ tasklet_schedule(&host->tasklet);
++}
++
++static irqreturn_t atmci_interrupt(int irq, void *dev_id)
++{
++ struct mmc_host *mmc = dev_id;
++ struct atmel_mci *host = mmc_priv(mmc);
++ u32 status, mask, pending;
++
++ spin_lock(&mmc->lock);
++
++ status = mci_readl(host, SR);
++ mask = mci_readl(host, IMR);
++ pending = status & mask;
++
++ do {
++ if (pending & MCI_CMD_ERROR_FLAGS) {
++ mci_writel(host, IDR, (MCI_BIT(CMDRDY)
++ | MCI_BIT(NOTBUSY)
++ | MCI_CMD_ERROR_FLAGS
++ | MCI_DATA_ERROR_FLAGS));
++ host->error_status = status;
++ host->cmd = NULL;
++ if (mci_stop_sent_is_complete(host))
++ mci_set_stop_error_pending(host);
++ else
++ mci_set_cmd_error_pending(host);
++ tasklet_schedule(&host->tasklet);
++ break;
++ }
++ if (pending & MCI_DATA_ERROR_FLAGS) {
++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS));
++ host->error_status = status;
++ mci_set_data_error_pending(host);
++ tasklet_schedule(&host->tasklet);
++ break;
++ }
++ if (pending & MCI_BIT(CMDRDY))
++ atmci_cmd_interrupt(mmc, status);
++ if (pending & MCI_BIT(NOTBUSY)) {
++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS));
++ mci_set_data_pending(host);
++ tasklet_schedule(&host->tasklet);
++ }
++
++ status = mci_readl(host, SR);
++ mask = mci_readl(host, IMR);
++ pending = status & mask;
++ } while (pending);
++
++ spin_unlock(&mmc->lock);
++
++ return IRQ_HANDLED;
++}
++
++static irqreturn_t atmci_detect_change(int irq, void *dev_id)
++{
++ struct mmc_host *mmc = dev_id;
++ struct atmel_mci *host = mmc_priv(mmc);
++
++ int present = !gpio_get_value(irq_to_gpio(irq));
++
++ if (present != host->present) {
++ pr_debug("%s: card %s\n", mmc_hostname(host->mmc),
++ present ? "inserted" : "removed");
++ host->present = present;
++ mci_set_card_detect_pending(host);
++ tasklet_schedule(&host->tasklet);
++ }
++ return IRQ_HANDLED;
++}
++
++static int __devinit atmci_probe(struct platform_device *pdev)
++{
++ struct mci_platform_data *board;
++ struct atmel_mci *host;
++ struct mmc_host *mmc;
++ struct resource *regs;
++ int irq;
++ int ret;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ board = pdev->dev.platform_data;
++
++ mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
++ if (!mmc)
++ return -ENOMEM;
++
++ host = mmc_priv(mmc);
++ host->pdev = pdev;
++ host->mmc = mmc;
++ if (board) {
++ host->detect_pin = board->detect_pin;
++ host->wp_pin = board->wp_pin;
++ } else {
++ host->detect_pin = -1;
++ host->detect_pin = -1;
++ }
++
++ host->mck = clk_get(&pdev->dev, "mci_clk");
++ if (IS_ERR(host->mck)) {
++ ret = PTR_ERR(host->mck);
++ goto out_free_host;
++ }
++ clk_enable(host->mck);
++
++ ret = -ENOMEM;
++ host->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!host->regs)
++ goto out_disable_clk;
++
++ host->bus_hz = clk_get_rate(host->mck);
++ host->mapbase = regs->start;
++
++ mmc->ops = &atmci_ops;
++ mmc->f_min = (host->bus_hz + 511) / 512;
++ mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
++ mmc->ocr_avail = 0x00100000;
++ mmc->caps |= MMC_CAP_4_BIT_DATA;
++
++ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
++
++ ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
++ if (ret)
++ goto out_unmap;
++
++ /* Assume card is present if we don't have a detect pin */
++ host->present = 1;
++ if (host->detect_pin >= 0) {
++ if (gpio_request(host->detect_pin, "mmc_detect")) {
++ printk(KERN_WARNING "%s: no detect pin available\n",
++ mmc_hostname(host->mmc));
++ host->detect_pin = -1;
++ } else {
++ host->present = !gpio_get_value(host->detect_pin);
++ }
++ }
++ if (host->wp_pin >= 0) {
++ if (gpio_request(host->wp_pin, "mmc_wp")) {
++ printk(KERN_WARNING "%s: no WP pin available\n",
++ mmc_hostname(host->mmc));
++ host->wp_pin = -1;
++ }
++ }
++
++ /* TODO: Get this information from platform data */
++ ret = -ENOMEM;
++ host->dma.req.req.dmac = find_dma_controller(0);
++ if (!host->dma.req.req.dmac) {
++ printk(KERN_ERR
++ "mmci: No DMA controller available, aborting\n");
++ goto out_free_irq;
++ }
++ ret = dma_alloc_channel(host->dma.req.req.dmac);
++ if (ret < 0) {
++ printk(KERN_ERR
++ "mmci: Unable to allocate DMA channel, aborting\n");
++ goto out_free_irq;
++ }
++ host->dma.req.req.channel = ret;
++ host->dma.req.width = DMA_WIDTH_32BIT;
++ host->dma.req.req.xfer_complete = atmci_xfer_complete;
++ host->dma.req.req.block_complete = NULL; // atmci_block_complete;
++ host->dma.req.req.error = atmci_dma_error;
++ host->dma.rx_periph_id = 0;
++ host->dma.tx_periph_id = 1;
++
++ mci_writel(host, CR, MCI_BIT(SWRST));
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CR, MCI_BIT(MCIEN));
++
++ platform_set_drvdata(pdev, host);
++
++ mmc_add_host(mmc);
++
++ if (host->detect_pin >= 0) {
++ ret = request_irq(gpio_to_irq(host->detect_pin),
++ atmci_detect_change,
++ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
++ DRIVER_NAME, mmc);
++ if (ret) {
++ printk(KERN_ERR
++ "%s: could not request IRQ %d for detect pin\n",
++ mmc_hostname(mmc),
++ gpio_to_irq(host->detect_pin));
++ gpio_free(host->detect_pin);
++ host->detect_pin = -1;
++ }
++ }
++
++ printk(KERN_INFO "%s: Atmel MCI controller at 0x%08lx irq %d\n",
++ mmc_hostname(mmc), host->mapbase, irq);
++
++ atmci_init_debugfs(host);
++
++ return 0;
++
++out_free_irq:
++ if (host->detect_pin >= 0)
++ gpio_free(host->detect_pin);
++ if (host->wp_pin >= 0)
++ gpio_free(host->wp_pin);
++ free_irq(irq, mmc);
++out_unmap:
++ iounmap(host->regs);
++out_disable_clk:
++ clk_disable(host->mck);
++ clk_put(host->mck);
++out_free_host:
++ mmc_free_host(mmc);
++ return ret;
++}
++
++static int __devexit atmci_remove(struct platform_device *pdev)
++{
++ struct atmel_mci *host = platform_get_drvdata(pdev);
++
++ platform_set_drvdata(pdev, NULL);
++
++ if (host) {
++ atmci_cleanup_debugfs(host);
++
++ if (host->detect_pin >= 0) {
++ free_irq(gpio_to_irq(host->detect_pin), host->mmc);
++ cancel_delayed_work(&host->mmc->detect);
++ gpio_free(host->detect_pin);
++ }
++
++ mmc_remove_host(host->mmc);
++
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CR, MCI_BIT(MCIDIS));
++ mci_readl(host, SR);
++
++ dma_release_channel(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++
++ if (host->wp_pin >= 0)
++ gpio_free(host->wp_pin);
++
++ free_irq(platform_get_irq(pdev, 0), host->mmc);
++ iounmap(host->regs);
++
++ clk_disable(host->mck);
++ clk_put(host->mck);
++
++ mmc_free_host(host->mmc);
++ }
++ return 0;
++}
++
++static struct platform_driver atmci_driver = {
++ .probe = atmci_probe,
++ .remove = __devexit_p(atmci_remove),
++ .driver = {
++ .name = DRIVER_NAME,
++ },
++};
++
++static int __init atmci_init(void)
++{
++ return platform_driver_register(&atmci_driver);
++}
++
++static void __exit atmci_exit(void)
++{
++ platform_driver_unregister(&atmci_driver);
++}
++
++module_init(atmci_init);
++module_exit(atmci_exit);
++
++MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/mmc/atmel-mci.h b/drivers/mmc/atmel-mci.h
+new file mode 100644
+index 0000000..60d15c4
+--- /dev/null
++++ b/drivers/mmc/atmel-mci.h
+@@ -0,0 +1,192 @@
++/*
++ * Atmel MultiMedia Card Interface driver
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
++#define __DRIVERS_MMC_ATMEL_MCI_H__
++
++/* MCI register offsets */
++#define MCI_CR 0x0000
++#define MCI_MR 0x0004
++#define MCI_DTOR 0x0008
++#define MCI_SDCR 0x000c
++#define MCI_ARGR 0x0010
++#define MCI_CMDR 0x0014
++#define MCI_BLKR 0x0018
++#define MCI_RSPR 0x0020
++#define MCI_RSPR1 0x0024
++#define MCI_RSPR2 0x0028
++#define MCI_RSPR3 0x002c
++#define MCI_RDR 0x0030
++#define MCI_TDR 0x0034
++#define MCI_SR 0x0040
++#define MCI_IER 0x0044
++#define MCI_IDR 0x0048
++#define MCI_IMR 0x004c
++
++/* Bitfields in CR */
++#define MCI_MCIEN_OFFSET 0
++#define MCI_MCIEN_SIZE 1
++#define MCI_MCIDIS_OFFSET 1
++#define MCI_MCIDIS_SIZE 1
++#define MCI_PWSEN_OFFSET 2
++#define MCI_PWSEN_SIZE 1
++#define MCI_PWSDIS_OFFSET 3
++#define MCI_PWSDIS_SIZE 1
++#define MCI_SWRST_OFFSET 7
++#define MCI_SWRST_SIZE 1
++
++/* Bitfields in MR */
++#define MCI_CLKDIV_OFFSET 0
++#define MCI_CLKDIV_SIZE 8
++#define MCI_PWSDIV_OFFSET 8
++#define MCI_PWSDIV_SIZE 3
++#define MCI_RDPROOF_OFFSET 11
++#define MCI_RDPROOF_SIZE 1
++#define MCI_WRPROOF_OFFSET 12
++#define MCI_WRPROOF_SIZE 1
++#define MCI_DMAPADV_OFFSET 14
++#define MCI_DMAPADV_SIZE 1
++#define MCI_BLKLEN_OFFSET 16
++#define MCI_BLKLEN_SIZE 16
++
++/* Bitfields in DTOR */
++#define MCI_DTOCYC_OFFSET 0
++#define MCI_DTOCYC_SIZE 4
++#define MCI_DTOMUL_OFFSET 4
++#define MCI_DTOMUL_SIZE 3
++
++/* Bitfields in SDCR */
++#define MCI_SDCSEL_OFFSET 0
++#define MCI_SDCSEL_SIZE 4
++#define MCI_SDCBUS_OFFSET 7
++#define MCI_SDCBUS_SIZE 1
++
++/* Bitfields in ARGR */
++#define MCI_ARG_OFFSET 0
++#define MCI_ARG_SIZE 32
++
++/* Bitfields in CMDR */
++#define MCI_CMDNB_OFFSET 0
++#define MCI_CMDNB_SIZE 6
++#define MCI_RSPTYP_OFFSET 6
++#define MCI_RSPTYP_SIZE 2
++#define MCI_SPCMD_OFFSET 8
++#define MCI_SPCMD_SIZE 3
++#define MCI_OPDCMD_OFFSET 11
++#define MCI_OPDCMD_SIZE 1
++#define MCI_MAXLAT_OFFSET 12
++#define MCI_MAXLAT_SIZE 1
++#define MCI_TRCMD_OFFSET 16
++#define MCI_TRCMD_SIZE 2
++#define MCI_TRDIR_OFFSET 18
++#define MCI_TRDIR_SIZE 1
++#define MCI_TRTYP_OFFSET 19
++#define MCI_TRTYP_SIZE 2
++
++/* Bitfields in BLKR */
++#define MCI_BCNT_OFFSET 0
++#define MCI_BCNT_SIZE 16
++
++/* Bitfields in RSPRn */
++#define MCI_RSP_OFFSET 0
++#define MCI_RSP_SIZE 32
++
++/* Bitfields in SR/IER/IDR/IMR */
++#define MCI_CMDRDY_OFFSET 0
++#define MCI_CMDRDY_SIZE 1
++#define MCI_RXRDY_OFFSET 1
++#define MCI_RXRDY_SIZE 1
++#define MCI_TXRDY_OFFSET 2
++#define MCI_TXRDY_SIZE 1
++#define MCI_BLKE_OFFSET 3
++#define MCI_BLKE_SIZE 1
++#define MCI_DTIP_OFFSET 4
++#define MCI_DTIP_SIZE 1
++#define MCI_NOTBUSY_OFFSET 5
++#define MCI_NOTBUSY_SIZE 1
++#define MCI_ENDRX_OFFSET 6
++#define MCI_ENDRX_SIZE 1
++#define MCI_ENDTX_OFFSET 7
++#define MCI_ENDTX_SIZE 1
++#define MCI_RXBUFF_OFFSET 14
++#define MCI_RXBUFF_SIZE 1
++#define MCI_TXBUFE_OFFSET 15
++#define MCI_TXBUFE_SIZE 1
++#define MCI_RINDE_OFFSET 16
++#define MCI_RINDE_SIZE 1
++#define MCI_RDIRE_OFFSET 17
++#define MCI_RDIRE_SIZE 1
++#define MCI_RCRCE_OFFSET 18
++#define MCI_RCRCE_SIZE 1
++#define MCI_RENDE_OFFSET 19
++#define MCI_RENDE_SIZE 1
++#define MCI_RTOE_OFFSET 20
++#define MCI_RTOE_SIZE 1
++#define MCI_DCRCE_OFFSET 21
++#define MCI_DCRCE_SIZE 1
++#define MCI_DTOE_OFFSET 22
++#define MCI_DTOE_SIZE 1
++#define MCI_OVRE_OFFSET 30
++#define MCI_OVRE_SIZE 1
++#define MCI_UNRE_OFFSET 31
++#define MCI_UNRE_SIZE 1
++
++/* Constants for DTOMUL */
++#define MCI_DTOMUL_1_CYCLE 0
++#define MCI_DTOMUL_16_CYCLES 1
++#define MCI_DTOMUL_128_CYCLES 2
++#define MCI_DTOMUL_256_CYCLES 3
++#define MCI_DTOMUL_1024_CYCLES 4
++#define MCI_DTOMUL_4096_CYCLES 5
++#define MCI_DTOMUL_65536_CYCLES 6
++#define MCI_DTOMUL_1048576_CYCLES 7
++
++/* Constants for RSPTYP */
++#define MCI_RSPTYP_NO_RESP 0
++#define MCI_RSPTYP_48_BIT 1
++#define MCI_RSPTYP_136_BIT 2
++
++/* Constants for SPCMD */
++#define MCI_SPCMD_NO_SPEC_CMD 0
++#define MCI_SPCMD_INIT_CMD 1
++#define MCI_SPCMD_SYNC_CMD 2
++#define MCI_SPCMD_INT_CMD 4
++#define MCI_SPCMD_INT_RESP 5
++
++/* Constants for TRCMD */
++#define MCI_TRCMD_NO_TRANS 0
++#define MCI_TRCMD_START_TRANS 1
++#define MCI_TRCMD_STOP_TRANS 2
++
++/* Constants for TRTYP */
++#define MCI_TRTYP_BLOCK 0
++#define MCI_TRTYP_MULTI_BLOCK 1
++#define MCI_TRTYP_STREAM 2
++
++/* Bit manipulation macros */
++#define MCI_BIT(name) \
++ (1 << MCI_##name##_OFFSET)
++#define MCI_BF(name,value) \
++ (((value) & ((1 << MCI_##name##_SIZE) - 1)) \
++ << MCI_##name##_OFFSET)
++#define MCI_BFEXT(name,value) \
++ (((value) >> MCI_##name##_OFFSET) \
++ & ((1 << MCI_##name##_SIZE) - 1))
++#define MCI_BFINS(name,value,old) \
++ (((old) & ~(((1 << MCI_##name##_SIZE) - 1) \
++ << MCI_##name##_OFFSET)) \
++ | MCI_BF(name,value))
++
++/* Register access macros */
++#define mci_readl(port,reg) \
++ __raw_readl((port)->regs + MCI_##reg)
++#define mci_writel(port,reg,value) \
++ __raw_writel((value), (port)->regs + MCI_##reg)
++
++#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
+diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
+index f334959..e2ef662 100644
+--- a/drivers/mtd/chips/cfi_cmdset_0001.c
++++ b/drivers/mtd/chips/cfi_cmdset_0001.c
+@@ -47,6 +47,7 @@
+ #define I82802AC 0x00ac
+ #define MANUFACTURER_ST 0x0020
+ #define M50LPW080 0x002F
++#define AT49BV640D 0x02de
+
+ static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+@@ -153,6 +154,47 @@ static void cfi_tell_features(struct cfi_pri_intelext *extp)
+ }
+ #endif
+
++/* Atmel chips don't use the same PRI format as Intel chips */
++static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
++{
++ struct map_info *map = mtd->priv;
++ struct cfi_private *cfi = map->fldrv_priv;
++ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
++ struct cfi_pri_atmel atmel_pri;
++ uint32_t features = 0;
++
++ /* Reverse byteswapping */
++ extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
++ extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
++ extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
++
++ memcpy(&atmel_pri, extp, sizeof(atmel_pri));
++ memset((char *)extp + 5, 0, sizeof(*extp) - 5);
++
++ printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
++
++ if (atmel_pri.Features & 0x01) /* chip erase supported */
++ features |= (1<<0);
++ if (atmel_pri.Features & 0x02) /* erase suspend supported */
++ features |= (1<<1);
++ if (atmel_pri.Features & 0x04) /* program suspend supported */
++ features |= (1<<2);
++ if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
++ features |= (1<<9);
++ if (atmel_pri.Features & 0x20) /* page mode read supported */
++ features |= (1<<7);
++ if (atmel_pri.Features & 0x40) /* queued erase supported */
++ features |= (1<<4);
++ if (atmel_pri.Features & 0x80) /* Protection bits supported */
++ features |= (1<<6);
++
++ extp->FeatureSupport = features;
++
++ /* burst write mode not supported */
++ cfi->cfiq->BufWriteTimeoutTyp = 0;
++ cfi->cfiq->BufWriteTimeoutMax = 0;
++}
++
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
+ static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
+@@ -221,6 +263,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd, void *param)
+ }
+
+ static struct cfi_fixup cfi_fixup_table[] = {
++ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ { CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
+ #endif
+diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
+index 1f64458..205977b 100644
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -185,6 +185,10 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
+ extp->TopBottom = 2;
+ else
+ extp->TopBottom = 3;
++
++ /* burst write mode not supported */
++ cfi->cfiq->BufWriteTimeoutTyp = 0;
++ cfi->cfiq->BufWriteTimeoutMax = 0;
+ }
+
+ static void fixup_use_secsi(struct mtd_info *mtd, void *param)
+@@ -217,6 +221,7 @@ static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param)
+ }
+
+ static struct cfi_fixup cfi_fixup_table[] = {
++ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef AMD_BOOTLOC_BUG
+ { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
+ #endif
+@@ -229,7 +234,6 @@ static struct cfi_fixup cfi_fixup_table[] = {
+ #if !FORCE_WORD_WRITE
+ { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
+ #endif
+- { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ { 0, 0, NULL, NULL }
+ };
+ static struct cfi_fixup jedec_fixup_table[] = {
+diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
+index 35f8864..29388e1 100644
+--- a/drivers/pcmcia/Kconfig
++++ b/drivers/pcmcia/Kconfig
+@@ -270,6 +270,13 @@ config AT91_CF
+ Say Y here to support the CompactFlash controller on AT91 chips.
+ Or choose M to compile the driver as a module named "at91_cf".
+
++config AT32_CF
++ tristate "AT32AP CompactFlash Controller"
++ depends on PCMCIA && AVR32 && PLATFORM_AT32AP
++ help
++ Say Y here to support the CompactFlash controller on AT32 chips.
++ Or choose M to compile the driver as a module named "at32_cf".
++
+ config PCCARD_NONSTATIC
+ tristate
+
+diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
+index 4276965..08d7ffa 100644
+--- a/drivers/pcmcia/Makefile
++++ b/drivers/pcmcia/Makefile
+@@ -37,6 +37,7 @@ obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o
+ obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o
+ obj-$(CONFIG_OMAP_CF) += omap_cf.o
+ obj-$(CONFIG_AT91_CF) += at91_cf.o
++obj-$(CONFIG_AT32_CF) += at32_cf.o
+
+ sa11xx_core-y += soc_common.o sa11xx_base.o
+ pxa2xx_core-y += soc_common.o pxa2xx_base.o
+diff --git a/drivers/pcmcia/at32_cf.c b/drivers/pcmcia/at32_cf.c
+new file mode 100644
+index 0000000..7165c39
+--- /dev/null
++++ b/drivers/pcmcia/at32_cf.c
+@@ -0,0 +1,506 @@
++/*
++ * Driver for AVR32 Static Memory Controller: CompactFlash support
++ *
++ * Copyright (C) 2006 Atmel Norway
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++ * 02111-1307, USA.
++ *
++ * The full GNU General Public License is included in this
++ * distribution in the file called COPYING.
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++#include <linux/dma-mapping.h>
++
++#include <pcmcia/ss.h>
++
++#include <asm/gpio.h>
++#include <asm/io.h>
++#include <asm/arch/board.h>
++
++#include <asm/arch/smc.h>
++
++struct at32_cf_socket {
++ struct pcmcia_socket socket;
++ int detect_pin;
++ int reset_pin;
++ int vcc_pin;
++ struct resource res_attr;
++ struct resource res_mem;
++ struct resource res_io;
++ struct smc_config smc;
++ unsigned int irq;
++ unsigned int cf_cs;
++ socket_state_t state;
++ unsigned present:1;
++};
++#define to_at32_cf(sock) container_of(sock, struct at32_cf_socket, socket)
++
++/*
++ * We have the following memory layout relative to the base address:
++ *
++ * Alt IDE Mode: 00e0 0000 -> 00ff ffff
++ * True IDE Mode: 00c0 0000 -> 00df ffff
++ * I/O memory: 0080 0000 -> 00bf ffff
++ * Common memory: 0040 0000 -> 007f ffff
++ * Attribute memory: 0000 0000 -> 003f ffff
++ */
++#define CF_ATTR_OFFSET 0x00000000
++#define CF_MEM_OFFSET 0x00400000
++#define CF_IO_OFFSET 0x00800000
++#define CF_RES_SIZE 2048
++
++#ifdef DEBUG
++
++static int pc_debug;
++module_param(pc_debug, int, 0644);
++
++static void at32_cf_debug(struct at32_cf_socket *cf, const char *func,
++ int level, const char *fmt, ...)
++{
++ va_list args;
++
++ if (pc_debug > level) {
++ printk(KERN_DEBUG "at32_cf/%u: %s: ", cf->cf_cs, func);
++ va_start(args, fmt);
++ vprintk(fmt, args);
++ va_end(args);
++ }
++}
++
++#define debug(cf, lvl, fmt, arg...) \
++ at32_cf_debug(cf, __func__, lvl, fmt, ##arg)
++
++#else
++#define debug(cf, lvl, fmt, arg...) do { } while (0)
++#endif
++
++static inline int at32_cf_present(struct at32_cf_socket *cf)
++{
++ int present = 1;
++
++ /* If we don't have a detect pin, assume the card is present */
++ if (cf->detect_pin >= 0)
++ present = !gpio_get_value(cf->detect_pin);
++
++ return present;
++}
++
++static irqreturn_t at32_cf_irq(int irq, void *dev_id)
++{
++ struct at32_cf_socket *cf = dev_id;
++ unsigned int present;
++
++ present = at32_cf_present(cf);
++ if (present != cf->present) {
++ cf->present = present;
++ debug(cf, 3, "card %s\n", present ? "present" : "gone");
++ pcmcia_parse_events(&cf->socket, SS_DETECT);
++ }
++
++ return IRQ_HANDLED;
++}
++
++static int at32_cf_get_status(struct pcmcia_socket *sock, u_int *value)
++{
++ struct at32_cf_socket *cf;
++ u_int status = 0;
++
++ cf = container_of(sock, struct at32_cf_socket, socket);
++
++ if (at32_cf_present(cf)) {
++ /* NOTE: gpio on AP7xxx is 3.3V */
++ status = SS_DETECT | SS_3VCARD | SS_READY;
++ if (cf->vcc_pin < 0 || gpio_get_value(cf->vcc_pin))
++ status |= SS_POWERON;
++ }
++
++ *value = status;
++ return 0;
++}
++
++static int at32_cf_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
++{
++ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
++
++ debug(cf, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n",
++ (state->csc_mask==0)?"<NONE> ":"",
++ (state->csc_mask&SS_DETECT)?"DETECT ":"",
++ (state->csc_mask&SS_READY)?"READY ":"",
++ (state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
++ (state->csc_mask&SS_BATWARN)?"BATWARN ":"",
++ (state->csc_mask&SS_STSCHG)?"STSCHG ":"",
++ (state->flags==0)?"<NONE> ":"",
++ (state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
++ (state->flags&SS_IOCARD)?"IOCARD ":"",
++ (state->flags&SS_RESET)?"RESET ":"",
++ (state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
++ (state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
++ state->Vcc, state->Vpp, state->io_irq);
++
++ /*
++ * TODO: Allow boards to override this in case they have level
++ * converters.
++ */
++ switch (state->Vcc) {
++ case 0:
++ if (cf->vcc_pin >= 0)
++ gpio_set_value(cf->vcc_pin, 0);
++ break;
++ case 33:
++ if (cf->vcc_pin >= 0)
++ gpio_set_value(cf->vcc_pin, 1);
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ if (cf->reset_pin >= 0)
++ gpio_set_value(cf->reset_pin, state->flags & SS_RESET);
++
++ cf->state = *state;
++
++ return 0;
++}
++
++static int at32_cf_socket_init(struct pcmcia_socket *sock)
++{
++#ifdef DEBUG
++ struct at32_cf_socket *cf = to_at32_cf(sock);
++ debug(cf, 2, "called\n");
++#endif
++ return 0;
++}
++
++static int at32_cf_suspend(struct pcmcia_socket *sock)
++{
++#ifdef DEBUG
++ struct at32_cf_socket *cf = to_at32_cf(sock);
++ debug(cf, 2, "called\n");
++#endif
++ at32_cf_set_socket(sock, &dead_socket);
++
++ return 0;
++}
++
++static int at32_cf_set_io_map(struct pcmcia_socket *sock,
++ struct pccard_io_map *map)
++{
++ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
++ int retval;
++
++ debug(cf, 2, "map %u speed %u start 0x%08x stop 0x%08x\n",
++ map->map, map->speed, map->start, map->stop);
++ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
++ (map->flags == 0) ? "<NONE>":"",
++ (map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
++ (map->flags & MAP_16BIT) ? "16BIT " : "",
++ (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
++ (map->flags & MAP_0WS) ? "0WS " : "",
++ (map->flags & MAP_WRPROT) ? "WRPROT " : "",
++ (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
++ (map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
++
++ map->flags &= MAP_ACTIVE | MAP_16BIT | MAP_USE_WAIT;
++
++ if (map->flags & MAP_16BIT)
++ cf->smc.bus_width = 2;
++ else
++ cf->smc.bus_width = 1;
++
++ if (map->flags & MAP_USE_WAIT)
++ cf->smc.nwait_mode = 3;
++ else
++ cf->smc.nwait_mode = 0;
++
++ retval = smc_set_configuration(cf->cf_cs, &cf->smc);
++ if (retval) {
++ printk(KERN_ERR "at32_cf: could not set up SMC for I/O\n");
++ return retval;
++ }
++
++ map->start = cf->socket.io_offset;
++ map->stop = map->start + CF_RES_SIZE - 1;
++
++ return 0;
++}
++
++static int
++at32_cf_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
++{
++ struct at32_cf_socket *cf;
++
++ cf = container_of(sock, struct at32_cf_socket, socket);
++
++ debug(cf, 2, "map %u speed %u card_start %08x\n",
++ map->map, map->speed, map->card_start);
++ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
++ (map->flags==0)?"<NONE>":"",
++ (map->flags&MAP_ACTIVE)?"ACTIVE ":"",
++ (map->flags&MAP_16BIT)?"16BIT ":"",
++ (map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
++ (map->flags&MAP_0WS)?"0WS ":"",
++ (map->flags&MAP_WRPROT)?"WRPROT ":"",
++ (map->flags&MAP_ATTRIB)?"ATTRIB ":"",
++ (map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
++
++ if (map->card_start)
++ return -EINVAL;
++
++ map->flags &= MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT;
++
++ if (map->flags & MAP_ATTRIB)
++ map->static_start = cf->res_attr.start;
++ else
++ map->static_start = cf->res_mem.start;
++
++ return 0;
++}
++
++static struct pccard_operations at32_cf_ops = {
++ .init = at32_cf_socket_init,
++ .suspend = at32_cf_suspend,
++ .get_status = at32_cf_get_status,
++ .set_socket = at32_cf_set_socket,
++ .set_io_map = at32_cf_set_io_map,
++ .set_mem_map = at32_cf_set_mem_map,
++};
++
++static int __init request_pin(struct platform_device *pdev,
++ unsigned int pin, const char *name)
++{
++ if (gpio_request(pin, name)) {
++ dev_warn(&pdev->dev, "failed to request %s pin\n", name);
++ return -1;
++ }
++
++ return pin;
++}
++
++static int __init at32_cf_probe(struct platform_device *pdev)
++{
++ struct at32_cf_socket *cf;
++ struct cf_platform_data *board = pdev->dev.platform_data;
++ struct resource *res_skt;
++ int irq;
++ int ret;
++
++ dev_dbg(&pdev->dev, "probe");
++
++ if (!board)
++ return -ENXIO;
++
++ res_skt = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res_skt)
++ return -ENXIO;
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ cf = kzalloc(sizeof(struct at32_cf_socket), GFP_KERNEL);
++ if (!cf)
++ return -ENOMEM;
++
++ cf->detect_pin = -1;
++ cf->reset_pin = -1;
++ cf->vcc_pin = -1;
++ cf->cf_cs = board->cs;
++
++ if (board->detect_pin)
++ cf->detect_pin = request_pin(pdev, board->detect_pin,
++ "cf_detect");
++ if (board->reset_pin)
++ cf->reset_pin = request_pin(pdev, board->reset_pin,
++ "cf_reset");
++ if (board->vcc_pin)
++ cf->vcc_pin = request_pin(pdev, board->reset_pin,
++ "cf_vcc");
++
++ debug(cf, 2, "pins: detect=%d reset=%d vcc=%d\n",
++ cf->detect_pin, cf->reset_pin, cf->vcc_pin);
++
++ cf->socket.pci_irq = irq;
++ cf->socket.ops = &at32_cf_ops;
++ cf->socket.resource_ops = &pccard_static_ops;
++ cf->socket.dev.parent = &pdev->dev;
++ cf->socket.owner = THIS_MODULE;
++ cf->socket.features =
++ SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
++ cf->socket.map_size = CF_RES_SIZE;
++
++ cf->res_attr.start = res_skt->start + CF_ATTR_OFFSET;
++ cf->res_attr.end = cf->res_attr.start + CF_RES_SIZE - 1;
++ cf->res_attr.name = "attribute";
++ cf->res_attr.flags = IORESOURCE_MEM;
++ ret = request_resource(res_skt, &cf->res_attr);
++ if (ret)
++ goto err_request_res_attr;
++
++ cf->res_mem.start = res_skt->start + CF_MEM_OFFSET;
++ cf->res_mem.end = cf->res_mem.start + CF_RES_SIZE - 1;
++ cf->res_mem.name = "memory";
++ cf->res_mem.flags = IORESOURCE_MEM;
++ ret = request_resource(res_skt, &cf->res_mem);
++ if (ret)
++ goto err_request_res_mem;
++
++ cf->res_io.start = res_skt->start + CF_IO_OFFSET;
++ cf->res_io.end = cf->res_io.start + CF_RES_SIZE - 1;
++ cf->res_io.name = "io";
++ cf->res_io.flags = IORESOURCE_MEM;
++ ret = request_resource(res_skt, &cf->res_io);
++ if (ret)
++ goto err_request_res_io;
++
++ cf->socket.io_offset = cf->res_io.start;
++
++ if (cf->detect_pin >= 0) {
++ ret = request_irq(gpio_to_irq(cf->detect_pin), at32_cf_irq,
++ IRQF_SHARED, "cf_detect", cf);
++ if (ret) {
++ debug(cf, 1,
++ "failed to request cf_detect interrupt\n");
++ goto err_detect_irq;
++ }
++ }
++
++ /* Setup SMC timings */
++ cf->smc.ncs_read_setup = 30;
++ cf->smc.nrd_setup = 75;
++ cf->smc.ncs_write_setup = 30;
++ cf->smc.nwe_setup = 75;
++
++ cf->smc.ncs_read_pulse = 240;
++ cf->smc.nrd_pulse = 165;
++ cf->smc.ncs_write_pulse = 240;
++ cf->smc.nwe_pulse = 165;
++
++ cf->smc.read_cycle = 300;
++ cf->smc.write_cycle = 300;
++
++ cf->smc.bus_width = 2;
++ cf->smc.nrd_controlled = 1;
++ cf->smc.nwe_controlled = 1;
++ cf->smc.nwait_mode = 0;
++ cf->smc.byte_write = 0;
++ cf->smc.tdf_cycles = 1;
++ cf->smc.tdf_mode = 0;
++
++ ret = smc_set_configuration(cf->cf_cs, &cf->smc);
++ if (ret) {
++ debug(cf, 1, "failed to configure SMC\n", ret);
++ goto err_smc;
++ }
++
++ ret = pcmcia_register_socket(&cf->socket);
++ if (ret) {
++ debug(cf, 1, "failed to register socket: %d\n", ret);
++ goto err_register_socket;
++ }
++
++ if (cf->reset_pin >= 0) {
++ gpio_direction_output(cf->reset_pin, 0);
++ }
++
++ platform_set_drvdata(pdev, cf);
++
++ dev_info(&pdev->dev, "Atmel SMC CF interface at 0x%08lx\n",
++ (unsigned long)res_skt->start);
++
++ return 0;
++
++err_register_socket:
++err_smc:
++ if (cf->detect_pin >= 0)
++ free_irq(gpio_to_irq(cf->detect_pin), cf);
++err_detect_irq:
++ release_resource(&cf->res_io);
++err_request_res_io:
++ release_resource(&cf->res_mem);
++err_request_res_mem:
++ release_resource(&cf->res_attr);
++err_request_res_attr:
++ if (cf->vcc_pin >= 0)
++ gpio_free(cf->vcc_pin);
++ if (cf->reset_pin >= 0)
++ gpio_free(cf->reset_pin);
++ if (cf->detect_pin >= 0)
++ gpio_free(cf->detect_pin);
++ kfree(cf);
++
++ return ret;
++}
++
++static int __exit at32_cf_remove(struct platform_device *pdev)
++{
++ struct at32_cf_socket *cf = platform_get_drvdata(pdev);
++
++ pcmcia_unregister_socket(&cf->socket);
++ if (cf->detect_pin >= 0) {
++ free_irq(gpio_to_irq(cf->detect_pin), cf);
++ gpio_free(cf->detect_pin);
++ }
++ if (cf->vcc_pin >= 0)
++ gpio_free(cf->vcc_pin);
++ if (cf->reset_pin >= 0)
++ gpio_free(cf->reset_pin);
++
++ release_resource(&cf->res_io);
++ release_resource(&cf->res_mem);
++ release_resource(&cf->res_attr);
++ kfree(cf);
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++
++static struct platform_driver at32_cf_driver = {
++ .remove = __exit_p(at32_cf_remove),
++ .driver = {
++ .name = "at32_cf",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init at32_cf_init(void)
++{
++ int ret;
++
++ ret = platform_driver_probe(&at32_cf_driver, at32_cf_probe);
++ if (ret)
++ printk(KERN_ERR "at32_cf: probe failed: %d\n", ret);
++ return ret;
++}
++
++static void __exit at32_cf_exit(void)
++{
++ platform_driver_unregister(&at32_cf_driver);
++}
++
++module_init(at32_cf_init);
++module_exit(at32_cf_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Driver for SMC PCMCIA interface");
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
+index d154dee..5a464ec 100644
+--- a/drivers/pcmcia/cistpl.c
++++ b/drivers/pcmcia/cistpl.c
+@@ -1091,7 +1091,7 @@ static int parse_cftable_entry(tuple_t *tuple,
+ break;
+ case 0x20:
+ entry->mem.nwin = 1;
+- entry->mem.win[0].len = le16_to_cpu(*(__le16 *)p) << 8;
++ entry->mem.win[0].len = (p[0] << 8) | (p[1] << 16);
+ entry->mem.win[0].card_addr = 0;
+ entry->mem.win[0].host_addr = 0;
+ p += 2;
+@@ -1099,9 +1099,8 @@ static int parse_cftable_entry(tuple_t *tuple,
+ break;
+ case 0x40:
+ entry->mem.nwin = 1;
+- entry->mem.win[0].len = le16_to_cpu(*(__le16 *)p) << 8;
+- entry->mem.win[0].card_addr =
+- le16_to_cpu(*(__le16 *)(p+2)) << 8;
++ entry->mem.win[0].len = (p[0] << 8) | (p[1] << 16);
++ entry->mem.win[0].card_addr = (p[2] << 8) | (p[3] << 16);
+ entry->mem.win[0].host_addr = 0;
+ p += 4;
+ if (p > q) return CS_BAD_TUPLE;
+diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
+index 95826b9..ee96d77 100644
+--- a/drivers/rtc/Kconfig
++++ b/drivers/rtc/Kconfig
+@@ -313,6 +313,13 @@ config RTC_DRV_PL031
+ To compile this driver as a module, choose M here: the
+ module will be called rtc-pl031.
+
++config RTC_DRV_AT32AP700X
++ tristate "AT32AP700X series RTC"
++ depends on RTC_CLASS && PLATFORM_AT32AP
++ help
++ Driver for the internal RTC (Realtime Clock) on Atmel AVR32
++ AT32AP700x family processors.
++
+ config RTC_DRV_AT91RM9200
+ tristate "AT91RM9200"
+ depends on RTC_CLASS && ARCH_AT91RM9200
+diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
+index 92bfe1b..d36d987 100644
+--- a/drivers/rtc/Makefile
++++ b/drivers/rtc/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o
+ obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
+ obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o
+ obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o
++obj-$(CONFIG_RTC_DRV_AT32AP700X) += rtc-at32ap700x.o
+ obj-$(CONFIG_RTC_DRV_DS1307) += rtc-ds1307.o
+ obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
+ obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o
+diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c
+new file mode 100644
+index 0000000..a59b7c1
+--- /dev/null
++++ b/drivers/rtc/rtc-at32ap700x.c
+@@ -0,0 +1,319 @@
++/*
++ * An RTC driver for the AVR32 AT32AP700x processor series
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/rtc.h>
++
++#include <asm/io.h>
++
++/* This is a bare-bones RTC. It runs during most system sleep states, but has
++ * no battery backup and gets reset during system restart. It must be
++ * initialized from an external clock (network, I2C, etc) before it can be of
++ * much use.
++ *
++ * The alarm functionality is limited by the hardware, not supporting periodic
++ * interrupts.
++ */
++
++#define RTC_CTRL 0x00
++#define RTC_CTRL_EN 0
++#define RTC_CTRL_PCLR 1
++#define RTC_CTRL_TOPEN 2
++#define RTC_CTRL_PSEL 8
++
++#define RTC_VAL 0x04
++
++#define RTC_TOP 0x08
++
++#define RTC_IER 0x10
++#define RTC_IER_TOPI 0
++
++#define RTC_IDR 0x14
++#define RTC_IDR_TOPI 0
++
++#define RTC_IMR 0x18
++#define RTC_IMR_TOPI 0
++
++#define RTC_ISR 0x1c
++#define RTC_ISR_TOPI 0
++
++#define RTC_ICR 0x20
++#define RTC_ICR_TOPI 0
++
++#define RTC_BIT(name) (1 << RTC_##name)
++#define RTC_BF(name,value) ((value) << RTC_##name)
++
++#define rtc_readl(dev,reg) \
++ __raw_readl((dev)->regs + RTC_##reg)
++#define rtc_writel(dev,reg,value) \
++ __raw_writel((value), (dev)->regs + RTC_##reg)
++
++struct rtc_at32ap700x {
++ struct rtc_device *rtc;
++ void __iomem *regs;
++ unsigned long alarm_time;
++ unsigned long irq;
++ spinlock_t lock;
++};
++
++static int at32_rtc_readtime(struct device *dev, struct rtc_time *tm)
++{
++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++ unsigned long now;
++
++ now = rtc_readl(rtc, VAL);
++ rtc_time_to_tm(now, tm);
++
++ return 0;
++}
++
++static int at32_rtc_settime(struct device *dev, struct rtc_time *tm)
++{
++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++ unsigned long now;
++ int ret;
++
++ ret = rtc_tm_to_time(tm, &now);
++ if (ret == 0)
++ rtc_writel(rtc, VAL, now);
++
++ return ret;
++}
++
++static int at32_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++ struct rtc_time tm;
++
++ rtc_time_to_tm(rtc->alarm_time, &tm);
++ alrm->time = tm;
++ alrm->pending = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0;
++
++ return 0;
++}
++
++static int at32_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++ struct rtc_time tm;
++ unsigned long rtc_unix_time;
++ unsigned long alarm_unix_time;
++ int ret;
++
++ rtc_unix_time = rtc_readl(rtc, VAL);
++ rtc_time_to_tm(rtc_unix_time, &tm);
++
++ /* RTC does only support one alarm time, not periodic */
++ if (alrm->time.tm_mday < 1) {
++ alrm->time.tm_mday = tm.tm_mday;
++ alrm->time.tm_mon = tm.tm_mon;
++ alrm->time.tm_year = tm.tm_year;
++ alrm->time.tm_wday = tm.tm_wday;
++ alrm->time.tm_yday = tm.tm_yday;
++ }
++
++ ret = rtc_tm_to_time(&alrm->time, &alarm_unix_time);
++ if (ret)
++ return ret;
++
++ if (alarm_unix_time < rtc_unix_time)
++ return -EINVAL;
++
++ spin_lock_irq(&rtc->lock);
++ rtc->alarm_time = alarm_unix_time;
++ rtc_writel(rtc, TOP, rtc->alarm_time);
++ if (alrm->pending)
++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++ | RTC_BIT(CTRL_TOPEN));
++ else
++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++ & ~RTC_BIT(CTRL_TOPEN));
++ spin_unlock_irq(&rtc->lock);
++
++ return ret;
++}
++
++static int at32_rtc_ioctl(struct device *dev, unsigned int cmd,
++ unsigned long arg)
++{
++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++ int ret = 0;
++
++ switch (cmd) {
++ case RTC_AIE_ON:
++ spin_lock_irq(&rtc->lock);
++ if (rtc_readl(rtc, VAL) > rtc->alarm_time)
++ return -EINVAL;
++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++ | RTC_BIT(CTRL_TOPEN));
++ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
++ rtc_writel(rtc, IER, RTC_BIT(IER_TOPI));
++ spin_unlock_irq(&rtc->lock);
++ break;
++ case RTC_AIE_OFF:
++ spin_lock_irq(&rtc->lock);
++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++ & ~RTC_BIT(CTRL_TOPEN));
++ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
++ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
++ spin_unlock_irq(&rtc->lock);
++ break;
++ default:
++ ret = -ENOIOCTLCMD;
++ break;
++ }
++
++ return ret;
++}
++
++static irqreturn_t at32_rtc_interrupt(int irq, void *dev_id)
++{
++ struct rtc_at32ap700x *rtc = (struct rtc_at32ap700x *)dev_id;
++ unsigned long isr = rtc_readl(rtc, ISR);
++ unsigned long events = 0;
++
++ spin_lock(&rtc->lock);
++
++ if (isr & RTC_BIT(ISR_TOPI)) {
++ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
++ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++ & ~RTC_BIT(CTRL_TOPEN));
++ rtc_writel(rtc, VAL, rtc->alarm_time);
++ events = RTC_AF | RTC_IRQF;
++ rtc_update_irq(&rtc->rtc->class_dev, 1, events);
++ }
++
++ spin_unlock(&rtc->lock);
++
++ return IRQ_HANDLED;
++}
++
++static struct rtc_class_ops at32_rtc_ops = {
++ .ioctl = at32_rtc_ioctl,
++ .read_time = at32_rtc_readtime,
++ .set_time = at32_rtc_settime,
++ .read_alarm = at32_rtc_readalarm,
++ .set_alarm = at32_rtc_setalarm,
++};
++
++static int __devinit at32_rtc_probe(struct platform_device *pdev)
++{
++ struct resource *regs;
++ struct rtc_at32ap700x *rtc;
++ int irq = -1;
++ int ret;
++
++ rtc = kmalloc(sizeof(struct rtc_at32ap700x), GFP_KERNEL);
++ if (!rtc) {
++ ret = -ENOMEM;
++ goto out;
++ }
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs) {
++ printk(KERN_ERR "rtc: no mmio resource defined for RTC\n");
++ ret = -ENXIO;
++ goto out;
++ }
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0) {
++ printk(KERN_ERR "rtc: could not get irq\n");
++ ret = -ENXIO;
++ goto out;
++ }
++
++ ret = request_irq(irq, at32_rtc_interrupt, IRQF_SHARED, "rtc", rtc);
++ if (ret) {
++ printk(KERN_ERR "rtc: could not request irq%d\n", irq);
++ goto out;
++ }
++
++ rtc->irq = irq;
++ rtc->alarm_time = 0;
++ rtc->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ spin_lock_init(&rtc->lock);
++
++ /* Maybe init RTC: count from zero at 1 Hz, disable wrap irq */
++ /* Do not reset VAL register, as it can hold an old time
++ * from last JTAG reset. */
++ if (!(rtc_readl(rtc, CTRL) & RTC_BIT(CTRL_EN))) {
++ rtc_writel(rtc, CTRL, RTC_BIT(CTRL_PCLR));
++ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
++ rtc_writel(rtc, CTRL, RTC_BF(CTRL_PSEL, 0xe)
++ | RTC_BIT(CTRL_EN));
++ }
++
++ /* REVISIT init in arch code if wdt or rtc is enabled; this
++ * affects both...
++ */
++
++ rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
++ &at32_rtc_ops, THIS_MODULE);
++ if (IS_ERR(rtc->rtc)) {
++ ret = PTR_ERR(rtc->rtc);
++ goto out_free_irq;
++ }
++
++ platform_set_drvdata(pdev, rtc);
++
++ printk(KERN_INFO "Atmel RTC for AT32AP700x at %08lx irq %ld\n",
++ (unsigned long)rtc->regs, rtc->irq);
++
++ return 0;
++
++out_free_irq:
++ free_irq(irq, rtc);
++ iounmap(rtc->regs);
++out:
++ kfree(rtc);
++ return ret;
++}
++
++static int __devexit at32_rtc_remove(struct platform_device *pdev)
++{
++ struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev);
++
++ if (rtc->irq >= 0)
++ free_irq(rtc->irq, rtc);
++ if (rtc->regs)
++ iounmap(rtc->regs);
++ rtc_device_unregister(rtc->rtc);
++ kfree(rtc);
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++
++static struct platform_driver at32_rtc_driver = {
++ .remove = __exit_p(at32_rtc_remove),
++ .driver = {
++ .name = "rtc",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init at32_rtc_init(void)
++{
++ return platform_driver_probe(&at32_rtc_driver, at32_rtc_probe);
++}
++
++static void __exit at32_rtc_exit(void)
++{
++ platform_driver_unregister(&at32_rtc_driver);
++}
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("Real time counter for AVR32 AT32AP700x");
++MODULE_LICENSE("GPL");
++
++module_init(at32_rtc_init);
++module_exit(at32_rtc_exit);
+diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
+index 935f48f..4d6b3c5 100644
+--- a/drivers/serial/atmel_serial.c
++++ b/drivers/serial/atmel_serial.c
+@@ -114,6 +114,7 @@ struct atmel_uart_port {
+ struct uart_port uart; /* uart */
+ struct clk *clk; /* uart clock */
+ unsigned short suspended; /* is port suspended? */
++ int break_active; /* break being received */
+ };
+
+ static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
+@@ -252,6 +253,7 @@ static void atmel_break_ctl(struct uart_port *port, int break_state)
+ */
+ static void atmel_rx_chars(struct uart_port *port)
+ {
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ struct tty_struct *tty = port->info->tty;
+ unsigned int status, ch, flg;
+
+@@ -267,13 +269,29 @@ static void atmel_rx_chars(struct uart_port *port)
+ * note that the error handling code is
+ * out of the main execution path
+ */
+- if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
++ if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
++ | ATMEL_US_OVRE | ATMEL_US_RXBRK)
++ || atmel_port->break_active)) {
+ UART_PUT_CR(port, ATMEL_US_RSTSTA); /* clear error */
+- if (status & ATMEL_US_RXBRK) {
++ if (status & ATMEL_US_RXBRK
++ && !atmel_port->break_active) {
+ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */
+ port->icount.brk++;
++ atmel_port->break_active = 1;
++ UART_PUT_IER(port, ATMEL_US_RXBRK);
+ if (uart_handle_break(port))
+ goto ignore_char;
++ } else {
++ /*
++ * This is either the end-of-break
++ * condition or we've received at
++ * least one character without RXBRK
++ * being set. In both cases, the next
++ * RXBRK will indicate start-of-break.
++ */
++ UART_PUT_IDR(port, ATMEL_US_RXBRK);
++ status &= ~ATMEL_US_RXBRK;
++ atmel_port->break_active = 0;
+ }
+ if (status & ATMEL_US_PARE)
+ port->icount.parity++;
+@@ -352,6 +370,16 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
+ /* Interrupt receive */
+ if (pending & ATMEL_US_RXRDY)
+ atmel_rx_chars(port);
++ else if (pending & ATMEL_US_RXBRK) {
++ /*
++ * End of break detected. If it came along
++ * with a character, atmel_rx_chars will
++ * handle it.
++ */
++ UART_PUT_CR(port, ATMEL_US_RSTSTA);
++ UART_PUT_IDR(port, ATMEL_US_RXBRK);
++ atmel_port->break_active = 0;
++ }
+
+ // TODO: All reads to CSR will clear these interrupts!
+ if (pending & ATMEL_US_RIIC) port->icount.rng++;
+@@ -484,11 +512,16 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios * termios,
+ unsigned long flags;
+ unsigned int mode, imr, quot, baud;
+
++ /* Get current mode register */
++ mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
++
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+- /* Get current mode register */
+- mode = UART_GET_MR(port) & ~(ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
++ if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
++ quot /= 8;
++ mode |= ATMEL_US_USCLKS_MCK_DIV8;
++ }
+
+ /* byte size */
+ switch (termios->c_cflag & CSIZE) {
+diff --git a/drivers/serial/atmel_serial.h b/drivers/serial/atmel_serial.h
+index 11b4436..e014177 100644
+--- a/drivers/serial/atmel_serial.h
++++ b/drivers/serial/atmel_serial.h
+@@ -46,6 +46,9 @@
+ #define ATMEL_US_USMODE_ISO7816_T1 6
+ #define ATMEL_US_USMODE_IRDA 8
+ #define ATMEL_US_USCLKS (3 << 4) /* Clock Selection */
++#define ATMEL_US_USCLKS_MCK (0 << 4)
++#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4)
++#define ATMEL_US_USCLKS_SCK (3 << 4)
+ #define ATMEL_US_CHRL (3 << 6) /* Character Length */
+ #define ATMEL_US_CHRL_5 (0 << 6)
+ #define ATMEL_US_CHRL_6 (1 << 6)
+diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
+index 66e7bc9..8f5453f 100644
+--- a/drivers/spi/atmel_spi.c
++++ b/drivers/spi/atmel_spi.c
+@@ -22,10 +22,7 @@
+ #include <asm/io.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
+-
+-#ifdef CONFIG_ARCH_AT91
+ #include <asm/arch/cpu.h>
+-#endif
+
+ #include "atmel_spi.h"
+
+@@ -116,16 +113,16 @@ static void atmel_spi_next_xfer(struct spi_master *master,
+
+ len = as->remaining_bytes;
+
+- tx_dma = xfer->tx_dma;
+- rx_dma = xfer->rx_dma;
++ tx_dma = xfer->tx_dma + xfer->len - len;
++ rx_dma = xfer->rx_dma + xfer->len - len;
+
+ /* use scratch buffer only when rx or tx data is unspecified */
+- if (rx_dma == INVALID_DMA_ADDRESS) {
++ if (!xfer->rx_buf) {
+ rx_dma = as->buffer_dma;
+ if (len > BUFFER_SIZE)
+ len = BUFFER_SIZE;
+ }
+- if (tx_dma == INVALID_DMA_ADDRESS) {
++ if (!xfer->tx_buf) {
+ tx_dma = as->buffer_dma;
+ if (len > BUFFER_SIZE)
+ len = BUFFER_SIZE;
+@@ -415,8 +412,8 @@ static int atmel_spi_setup(struct spi_device *spi)
+ csr |= SPI_BIT(NCPHA);
+
+ /* TODO: DLYBS and DLYBCT */
+- csr |= SPI_BF(DLYBS, 10);
+- csr |= SPI_BF(DLYBCT, 10);
++ csr |= SPI_BF(DLYBS, 0);
++ csr |= SPI_BF(DLYBCT, 0);
+
+ /* chipselect must have been muxed as GPIO (e.g. in board setup) */
+ npcs_pin = (unsigned int)spi->controller_data;
+@@ -552,10 +549,8 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
+ goto out_free_buffer;
+ as->irq = irq;
+ as->clk = clk;
+-#ifdef CONFIG_ARCH_AT91
+ if (!cpu_is_at91rm9200())
+ as->new_1 = 1;
+-#endif
+
+ ret = request_irq(irq, atmel_spi_interrupt, 0,
+ pdev->dev.bus_id, master);
+diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
+index 8372ace..2fcbbd4 100644
+--- a/drivers/video/Kconfig
++++ b/drivers/video/Kconfig
+@@ -674,6 +674,22 @@ config FB_S1D13XXX
+ working with S1D13806). Product specs at
+ <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
+
++config FB_ATMEL
++ tristate "AT91/AT32 LCD Controller support"
++ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
++ select FB_CFB_FILLRECT
++ select FB_CFB_COPYAREA
++ select FB_CFB_IMAGEBLIT
++ help
++ This enables support for the AT91/AT32 LCD Controller.
++
++config FB_INTSRAM
++ bool "Frame Buffer in internal SRAM"
++ depends on FB_ATMEL && ARCH_AT91SAM9261
++ help
++ Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
++ to let frame buffer in external SDRAM.
++
+ config FB_NVIDIA
+ tristate "nVidia Framebuffer Support"
+ depends on FB && PCI
+diff --git a/drivers/video/Makefile b/drivers/video/Makefile
+index 760305c..17a09c6 100644
+--- a/drivers/video/Makefile
++++ b/drivers/video/Makefile
+@@ -75,6 +75,7 @@ obj-$(CONFIG_FB_G364) += g364fb.o
+ obj-$(CONFIG_FB_SA1100) += sa1100fb.o
+ obj-$(CONFIG_FB_HIT) += hitfb.o
+ obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
++obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
+ obj-$(CONFIG_FB_PVR2) += pvr2fb.o
+ obj-$(CONFIG_FB_VOODOO1) += sstfb.o
+ obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
+diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
+new file mode 100644
+index 0000000..e1d5bd0
+--- /dev/null
++++ b/drivers/video/atmel_lcdfb.c
+@@ -0,0 +1,752 @@
++/*
++ * Driver for AT91/AT32 LCD Controller
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file COPYING in the main directory of this archive for
++ * more details.
++ */
++
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
++#include <linux/interrupt.h>
++#include <linux/clk.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/gpio.h>
++
++#include <video/atmel_lcdc.h>
++
++#define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg))
++#define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg))
++
++/* configurable parameters */
++#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
++#define ATMEL_LCDC_DMA_BURST_LEN 8
++
++#if defined(CONFIG_ARCH_AT91SAM9263)
++#define ATMEL_LCDC_FIFO_SIZE 2048
++#else
++#define ATMEL_LCDC_FIFO_SIZE 512
++#endif
++
++#if defined(CONFIG_ARCH_AT91)
++#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT
++
++static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
++ struct fb_var_screeninfo *var)
++{
++
++}
++#elif defined(CONFIG_AVR32)
++#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
++ | FBINFO_PARTIAL_PAN_OK \
++ | FBINFO_HWACCEL_XPAN \
++ | FBINFO_HWACCEL_YPAN)
++
++static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
++ struct fb_var_screeninfo *var)
++{
++ u32 dma2dcfg;
++ u32 pixeloff;
++
++ pixeloff = (var->xoffset * var->bits_per_pixel) & 0x1f;
++
++ dma2dcfg = ((var->xres_virtual - var->xres) * var->bits_per_pixel) / 8;
++ dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET;
++ lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
++
++ /* Update configuration */
++ lcdc_writel(sinfo, ATMEL_LCDC_DMACON,
++ lcdc_readl(sinfo, ATMEL_LCDC_DMACON)
++ | ATMEL_LCDC_DMAUPDT);
++}
++#endif
++
++
++static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
++ .type = FB_TYPE_PACKED_PIXELS,
++ .visual = FB_VISUAL_TRUECOLOR,
++ .xpanstep = 0,
++ .ypanstep = 0,
++ .ywrapstep = 0,
++ .accel = FB_ACCEL_NONE,
++};
++
++
++static void atmel_lcdfb_update_dma(struct fb_info *info,
++ struct fb_var_screeninfo *var)
++{
++ struct atmel_lcdfb_info *sinfo = info->par;
++ struct fb_fix_screeninfo *fix = &info->fix;
++ unsigned long dma_addr;
++
++ dma_addr = (fix->smem_start + var->yoffset * fix->line_length
++ + var->xoffset * var->bits_per_pixel / 8);
++
++ dma_addr &= ~3UL;
++
++ /* Set framebuffer DMA base address and pixel offset */
++ lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
++
++ atmel_lcdfb_update_dma2d(sinfo, var);
++}
++
++static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo)
++{
++ struct fb_info *info = sinfo->info;
++
++ dma_free_writecombine(info->device, info->fix.smem_len,
++ info->screen_base, info->fix.smem_start);
++}
++
++/**
++ * atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
++ * @sinfo: the frame buffer to allocate memory for
++ */
++static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
++{
++ struct fb_info *info = sinfo->info;
++ struct fb_var_screeninfo *var = &info->var;
++
++ info->fix.smem_len = (var->xres_virtual * var->yres_virtual
++ * ((var->bits_per_pixel + 7) / 8));
++
++ info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
++ (dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
++
++ if (!info->screen_base) {
++ return -ENOMEM;
++ }
++
++ return 0;
++}
++
++/**
++ * atmel_lcdfb_check_var - Validates a var passed in.
++ * @var: frame buffer variable screen structure
++ * @info: frame buffer structure that represents a single frame buffer
++ *
++ * Checks to see if the hardware supports the state requested by
++ * var passed in. This function does not alter the hardware
++ * state!!! This means the data stored in struct fb_info and
++ * struct atmel_lcdfb_info do not change. This includes the var
++ * inside of struct fb_info. Do NOT change these. This function
++ * can be called on its own if we intent to only test a mode and
++ * not actually set it. The stuff in modedb.c is a example of
++ * this. If the var passed in is slightly off by what the
++ * hardware can support then we alter the var PASSED in to what
++ * we can do. If the hardware doesn't support mode change a
++ * -EINVAL will be returned by the upper layers. You don't need
++ * to implement this function then. If you hardware doesn't
++ * support changing the resolution then this function is not
++ * needed. In this case the driver would just provide a var that
++ * represents the static state the screen is in.
++ *
++ * Returns negative errno on error, or zero on success.
++ */
++static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
++ struct fb_info *info)
++{
++ struct device *dev = info->device;
++ struct atmel_lcdfb_info *sinfo = info->par;
++ unsigned long clk_value_khz;
++
++ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
++
++ dev_dbg(dev, "%s:\n", __func__);
++ dev_dbg(dev, " resolution: %ux%u\n", var->xres, var->yres);
++ dev_dbg(dev, " pixclk: %lu KHz\n", PICOS2KHZ(var->pixclock));
++ dev_dbg(dev, " bpp: %u\n", var->bits_per_pixel);
++ dev_dbg(dev, " clk: %lu KHz\n", clk_value_khz);
++
++ if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) {
++ dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
++ return -EINVAL;
++ }
++
++ /* Force same alignment for each line */
++ var->xres = (var->xres + 3) & ~3UL;
++ var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
++
++ var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
++ var->transp.msb_right = 0;
++ var->transp.offset = var->transp.length = 0;
++ var->xoffset = var->yoffset = 0;
++
++ switch (var->bits_per_pixel) {
++ case 2:
++ case 4:
++ case 8:
++ var->red.offset = var->green.offset = var->blue.offset = 0;
++ var->red.length = var->green.length = var->blue.length
++ = var->bits_per_pixel;
++ break;
++ case 15:
++ case 16:
++ var->red.offset = 0;
++ var->green.offset = 5;
++ var->blue.offset = 10;
++ var->red.length = var->green.length = var->blue.length = 5;
++ break;
++ case 24:
++ case 32:
++ var->red.offset = 0;
++ var->green.offset = 8;
++ var->blue.offset = 16;
++ var->red.length = var->green.length = var->blue.length = 8;
++ break;
++ default:
++ dev_err(dev, "color depth %d not supported\n",
++ var->bits_per_pixel);
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++/**
++ * atmel_lcdfb_set_par - Alters the hardware state.
++ * @info: frame buffer structure that represents a single frame buffer
++ *
++ * Using the fb_var_screeninfo in fb_info we set the resolution
++ * of the this particular framebuffer. This function alters the
++ * par AND the fb_fix_screeninfo stored in fb_info. It doesn't
++ * not alter var in fb_info since we are using that data. This
++ * means we depend on the data in var inside fb_info to be
++ * supported by the hardware. atmel_lcdfb_check_var is always called
++ * before atmel_lcdfb_set_par to ensure this. Again if you can't
++ * change the resolution you don't need this function.
++ *
++ */
++static int atmel_lcdfb_set_par(struct fb_info *info)
++{
++ struct atmel_lcdfb_info *sinfo = info->par;
++ unsigned long value;
++ unsigned long clk_value_khz;
++
++ dev_dbg(info->device, "%s:\n", __func__);
++ dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n",
++ info->var.xres, info->var.yres,
++ info->var.xres_virtual, info->var.yres_virtual);
++
++ /* Turn off the LCD controller and the DMA controller */
++ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
++
++ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
++
++ if (info->var.bits_per_pixel <= 8)
++ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
++ else
++ info->fix.visual = FB_VISUAL_TRUECOLOR;
++
++ info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
++
++ /* Re-initialize the DMA engine... */
++ dev_dbg(info->device, " * update DMA engine\n");
++ atmel_lcdfb_update_dma(info, &info->var);
++
++ /* ...set frame size and burst length = 8 words (?) */
++ value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32;
++ value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
++ lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
++
++ /* Now, the LCDC core... */
++
++ /* Set pixel clock */
++ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
++
++ value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
++
++ if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
++ value++;
++
++ value = (value / 2) - 1;
++
++ if (value <= 0) {
++ dev_notice(info->device, "Bypassing pixel clock divider\n");
++ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
++ } else
++ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
++
++ /* Initialize control register 2 */
++ value = sinfo->default_lcdcon2;
++
++ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
++ value |= ATMEL_LCDC_INVLINE_INVERTED;
++ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
++ value |= ATMEL_LCDC_INVFRAME_INVERTED;
++
++ switch (info->var.bits_per_pixel) {
++ case 1: value |= ATMEL_LCDC_PIXELSIZE_1; break;
++ case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
++ case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
++ case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
++ case 15: /* fall through */
++ case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
++ case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
++ case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
++ default: BUG(); break;
++ }
++ dev_dbg(info->device, " * LCDCON2 = %08lx\n", value);
++ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
++
++ /* Vertical timing */
++ value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
++ value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET;
++ value |= info->var.lower_margin;
++ dev_dbg(info->device, " * LCDTIM1 = %08lx\n", value);
++ lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
++
++ /* Horizontal timing */
++ value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
++ value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
++ value |= (info->var.left_margin - 1);
++ dev_dbg(info->device, " * LCDTIM2 = %08lx\n", value);
++ lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
++
++ /* Display size */
++ value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
++ value |= info->var.yres - 1;
++ lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
++
++ /* FIFO Threshold: Use formula from data sheet */
++ value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
++ lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
++
++ /* Toggle LCD_MODE every frame */
++ lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
++
++ /* Disable all interrupts */
++ lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
++
++ /* Set contrast */
++ value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE;
++ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
++ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
++ /* ...wait for DMA engine to become idle... */
++ while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
++ msleep(10);
++
++ dev_dbg(info->device, " * re-enable DMA engine\n");
++ /* ...and enable it with updated configuration */
++ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
++
++ dev_dbg(info->device, " * re-enable LCDC core\n");
++ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
++ (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
++
++ dev_dbg(info->device, " * DONE\n");
++
++ return 0;
++}
++
++static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf)
++{
++ chan &= 0xffff;
++ chan >>= 16 - bf->length;
++ return chan << bf->offset;
++}
++
++/**
++ * atmel_lcdfb_setcolreg - Optional function. Sets a color register.
++ * @regno: Which register in the CLUT we are programming
++ * @red: The red value which can be up to 16 bits wide
++ * @green: The green value which can be up to 16 bits wide
++ * @blue: The blue value which can be up to 16 bits wide.
++ * @transp: If supported the alpha value which can be up to 16 bits wide.
++ * @info: frame buffer info structure
++ *
++ * Set a single color register. The values supplied have a 16 bit
++ * magnitude which needs to be scaled in this function for the hardware.
++ * Things to take into consideration are how many color registers, if
++ * any, are supported with the current color visual. With truecolor mode
++ * no color palettes are supported. Here a psuedo palette is created
++ * which we store the value in pseudo_palette in struct fb_info. For
++ * pseudocolor mode we have a limited color palette. To deal with this
++ * we can program what color is displayed for a particular pixel value.
++ * DirectColor is similar in that we can program each color field. If
++ * we have a static colormap we don't need to implement this function.
++ *
++ * Returns negative errno on error, or zero on success. In an
++ * ideal world, this would have been the case, but as it turns
++ * out, the other drivers return 1 on failure, so that's what
++ * we're going to do.
++ */
++static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
++ unsigned int green, unsigned int blue,
++ unsigned int transp, struct fb_info *info)
++{
++ struct atmel_lcdfb_info *sinfo = info->par;
++ unsigned int val;
++ u32 *pal;
++ int ret = 1;
++
++ if (info->var.grayscale)
++ red = green = blue = (19595 * red + 38470 * green
++ + 7471 * blue) >> 16;
++
++ switch (info->fix.visual) {
++ case FB_VISUAL_TRUECOLOR:
++ if (regno < 16) {
++ pal = info->pseudo_palette;
++
++ val = chan_to_field(red, &info->var.red);
++ val |= chan_to_field(green, &info->var.green);
++ val |= chan_to_field(blue, &info->var.blue);
++
++ pal[regno] = val;
++ ret = 0;
++ }
++ break;
++
++ case FB_VISUAL_PSEUDOCOLOR:
++ if (regno < 256) {
++ val = ((red >> 11) & 0x001f);
++ val |= ((green >> 6) & 0x03e0);
++ val |= ((blue >> 1) & 0x7c00);
++
++ /*
++ * TODO: intensity bit. Maybe something like
++ * ~(red[10] ^ green[10] ^ blue[10]) & 1
++ */
++
++ lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
++ ret = 0;
++ }
++ break;
++ }
++
++ return ret;
++}
++
++static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
++ struct fb_info *info)
++{
++ dev_dbg(info->device, "%s\n", __func__);
++
++ atmel_lcdfb_update_dma(info, var);
++
++ return 0;
++}
++
++static struct fb_ops atmel_lcdfb_ops = {
++ .owner = THIS_MODULE,
++ .fb_check_var = atmel_lcdfb_check_var,
++ .fb_set_par = atmel_lcdfb_set_par,
++ .fb_setcolreg = atmel_lcdfb_setcolreg,
++ .fb_pan_display = atmel_lcdfb_pan_display,
++ .fb_fillrect = cfb_fillrect,
++ .fb_copyarea = cfb_copyarea,
++ .fb_imageblit = cfb_imageblit,
++};
++
++static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
++{
++ struct fb_info *info = dev_id;
++ struct atmel_lcdfb_info *sinfo = info->par;
++ u32 status;
++
++ status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
++ lcdc_writel(sinfo, ATMEL_LCDC_IDR, status);
++ return IRQ_HANDLED;
++}
++
++static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
++{
++ struct fb_info *info = sinfo->info;
++ int ret = 0;
++
++ memset_io(info->screen_base, 0, info->fix.smem_len);
++ info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
++
++ dev_info(info->device,
++ "%luKiB frame buffer at %08lx (mapped at %p)\n",
++ (unsigned long)info->fix.smem_len / 1024,
++ (unsigned long)info->fix.smem_start,
++ info->screen_base);
++
++ /* Allocate colormap */
++ ret = fb_alloc_cmap(&info->cmap, 256, 0);
++ if (ret < 0)
++ dev_err(info->device, "Alloc color map failed\n");
++
++ return ret;
++}
++
++static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
++{
++ if (sinfo->bus_clk)
++ clk_enable(sinfo->bus_clk);
++ clk_enable(sinfo->lcdc_clk);
++}
++
++static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
++{
++ if (sinfo->bus_clk)
++ clk_disable(sinfo->bus_clk);
++ clk_disable(sinfo->lcdc_clk);
++}
++
++
++static int __init atmel_lcdfb_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct fb_info *info;
++ struct atmel_lcdfb_info *sinfo;
++ struct atmel_lcdfb_info *pdata_sinfo;
++ struct resource *regs = NULL;
++ struct resource *map = NULL;
++ int ret;
++
++ dev_dbg(dev, "%s BEGIN\n", __func__);
++
++ ret = -ENOMEM;
++ info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev);
++ if (!info) {
++ dev_err(dev, "cannot allocate memory\n");
++ goto out;
++ }
++
++ sinfo = info->par;
++
++ if (dev->platform_data) {
++ pdata_sinfo = (struct atmel_lcdfb_info *)dev->platform_data;
++ sinfo->default_bpp = pdata_sinfo->default_bpp;
++ sinfo->default_dmacon = pdata_sinfo->default_dmacon;
++ sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2;
++ sinfo->default_monspecs = pdata_sinfo->default_monspecs;
++ sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
++ sinfo->guard_time = pdata_sinfo->guard_time;
++ } else {
++ dev_err(dev, "cannot get default configuration\n");
++ goto free_info;
++ }
++ sinfo->info = info;
++ sinfo->pdev = pdev;
++
++ strcpy(info->fix.id, sinfo->pdev->name);
++ info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
++ info->pseudo_palette = sinfo->pseudo_palette;
++ info->fbops = &atmel_lcdfb_ops;
++
++ memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
++ info->fix = atmel_lcdfb_fix;
++
++ /* Enable LCDC Clocks */
++ if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
++ sinfo->bus_clk = clk_get(dev, "hck1");
++ if (IS_ERR(sinfo->bus_clk)) {
++ ret = PTR_ERR(sinfo->bus_clk);
++ goto free_info;
++ }
++ }
++ sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
++ if (IS_ERR(sinfo->lcdc_clk)) {
++ ret = PTR_ERR(sinfo->lcdc_clk);
++ goto put_bus_clk;
++ }
++ atmel_lcdfb_start_clock(sinfo);
++
++ ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
++ info->monspecs.modedb_len, info->monspecs.modedb,
++ sinfo->default_bpp);
++ if (!ret) {
++ dev_err(dev, "no suitable video mode found\n");
++ goto stop_clk;
++ }
++
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs) {
++ dev_err(dev, "resources unusable\n");
++ ret = -ENXIO;
++ goto stop_clk;
++ }
++
++ sinfo->irq_base = platform_get_irq(pdev, 0);
++ if (sinfo->irq_base < 0) {
++ dev_err(dev, "unable to get irq\n");
++ ret = sinfo->irq_base;
++ goto stop_clk;
++ }
++
++ /* Initialize video memory */
++ map = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ if (map) {
++ /* use a pre-allocated memory buffer */
++ info->fix.smem_start = map->start;
++ info->fix.smem_len = map->end - map->start + 1;
++ if (!request_mem_region(info->fix.smem_start,
++ info->fix.smem_len, pdev->name)) {
++ ret = -EBUSY;
++ goto stop_clk;
++ }
++
++ info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
++ if (!info->screen_base)
++ goto release_intmem;
++ } else {
++ /* alocate memory buffer */
++ ret = atmel_lcdfb_alloc_video_memory(sinfo);
++ if (ret < 0) {
++ dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
++ goto stop_clk;
++ }
++ }
++
++ /* LCDC registers */
++ info->fix.mmio_start = regs->start;
++ info->fix.mmio_len = regs->end - regs->start + 1;
++
++ if (!request_mem_region(info->fix.mmio_start,
++ info->fix.mmio_len, pdev->name)) {
++ ret = -EBUSY;
++ goto free_fb;
++ }
++
++ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
++ if (!sinfo->mmio) {
++ dev_err(dev, "cannot map LCDC registers\n");
++ goto release_mem;
++ }
++
++ /* interrupt */
++ ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
++ if (ret) {
++ dev_err(dev, "request_irq failed: %d\n", ret);
++ goto unmap_mmio;
++ }
++
++ ret = atmel_lcdfb_init_fbinfo(sinfo);
++ if (ret < 0) {
++ dev_err(dev, "init fbinfo failed: %d\n", ret);
++ goto unregister_irqs;
++ }
++
++ /*
++ * This makes sure that our colour bitfield
++ * descriptors are correctly initialised.
++ */
++ atmel_lcdfb_check_var(&info->var, info);
++
++ ret = fb_set_var(info, &info->var);
++ if (ret) {
++ dev_warn(dev, "unable to set display parameters\n");
++ goto free_cmap;
++ }
++
++ dev_set_drvdata(dev, info);
++
++ /*
++ * Tell the world that we're ready to go
++ */
++ ret = register_framebuffer(info);
++ if (ret < 0) {
++ dev_err(dev, "failed to register framebuffer device: %d\n", ret);
++ goto free_cmap;
++ }
++
++ /* Power up the LCDC screen */
++ if (sinfo->atmel_lcdfb_power_control)
++ sinfo->atmel_lcdfb_power_control(1);
++
++ dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
++ info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
++
++ return 0;
++
++
++free_cmap:
++ fb_dealloc_cmap(&info->cmap);
++unregister_irqs:
++ free_irq(sinfo->irq_base, info);
++unmap_mmio:
++ iounmap(sinfo->mmio);
++release_mem:
++ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
++free_fb:
++ if (map)
++ iounmap(info->screen_base);
++ else
++ atmel_lcdfb_free_video_memory(sinfo);
++
++release_intmem:
++ if (map)
++ release_mem_region(info->fix.smem_start, info->fix.smem_len);
++stop_clk:
++ atmel_lcdfb_stop_clock(sinfo);
++ clk_put(sinfo->lcdc_clk);
++put_bus_clk:
++ if (sinfo->bus_clk)
++ clk_put(sinfo->bus_clk);
++free_info:
++ framebuffer_release(info);
++out:
++ dev_dbg(dev, "%s FAILED\n", __func__);
++ return ret;
++}
++
++static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct fb_info *info = dev_get_drvdata(dev);
++ struct atmel_lcdfb_info *sinfo = info->par;
++
++ if (!sinfo)
++ return 0;
++
++ if (sinfo->atmel_lcdfb_power_control)
++ sinfo->atmel_lcdfb_power_control(0);
++ unregister_framebuffer(info);
++ atmel_lcdfb_stop_clock(sinfo);
++ clk_put(sinfo->lcdc_clk);
++ if (sinfo->bus_clk)
++ clk_put(sinfo->bus_clk);
++ fb_dealloc_cmap(&info->cmap);
++ free_irq(sinfo->irq_base, info);
++ iounmap(sinfo->mmio);
++ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
++ if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
++ iounmap(info->screen_base);
++ release_mem_region(info->fix.smem_start, info->fix.smem_len);
++ } else {
++ atmel_lcdfb_free_video_memory(sinfo);
++ }
++
++ dev_set_drvdata(dev, NULL);
++ framebuffer_release(info);
++
++ return 0;
++}
++
++static struct platform_driver atmel_lcdfb_driver = {
++ .remove = __exit_p(atmel_lcdfb_remove),
++ .driver = {
++ .name = "atmel_lcdfb",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init atmel_lcdfb_init(void)
++{
++ return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe);
++}
++
++static void __exit atmel_lcdfb_exit(void)
++{
++ platform_driver_unregister(&atmel_lcdfb_driver);
++}
++
++module_init(atmel_lcdfb_init);
++module_exit(atmel_lcdfb_exit);
++
++MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
++MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@rfo.atmel.com>");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
+index 47d15b5..b59d5bb 100644
+--- a/drivers/video/backlight/Kconfig
++++ b/drivers/video/backlight/Kconfig
+@@ -8,26 +8,44 @@ menuconfig BACKLIGHT_LCD_SUPPORT
+ Enable this to be able to choose the drivers for controlling the
+ backlight and the LCD panel on some platforms, for example on PDAs.
+
+-config BACKLIGHT_CLASS_DEVICE
+- tristate "Lowlevel Backlight controls"
++#
++# LCD
++#
++config LCD_CLASS_DEVICE
++ tristate "Lowlevel LCD controls"
+ depends on BACKLIGHT_LCD_SUPPORT
+ default m
+ help
+- This framework adds support for low-level control of the LCD
+- backlight. This includes support for brightness and power.
++ This framework adds support for low-level control of LCD.
++ Some framebuffer devices connect to platform-specific LCD modules
++ in order to have a platform-specific way to control the flat panel
++ (contrast and applying power to the LCD (not to the backlight!)).
+
+ To have support for your specific LCD panel you will have to
+ select the proper drivers which depend on this option.
+
+-config LCD_CLASS_DEVICE
+- tristate "Lowlevel LCD controls"
++config LCD_LTV350QV
++ tristate "Samsung LTV350QV LCD Panel"
++ depends on LCD_CLASS_DEVICE && SPI_MASTER
++ default n
++ help
++ If you have a Samsung LTV350QV LCD panel, say y to include a
++ power control driver for it. The panel starts up in power
++ off state, so you need this driver in order to see any
++ output.
++
++ The LTV350QV panel is present on all ATSTK1000 boards.
++
++#
++# Backlight
++#
++config BACKLIGHT_CLASS_DEVICE
++ tristate "Lowlevel Backlight controls"
+ depends on BACKLIGHT_LCD_SUPPORT
+ default m
+ help
+- This framework adds support for low-level control of LCD.
+- Some framebuffer devices connect to platform-specific LCD modules
+- in order to have a platform-specific way to control the flat panel
+- (contrast and applying power to the LCD (not to the backlight!)).
++ This framework adds support for low-level control of the LCD
++ backlight. This includes support for brightness and power.
+
+ To have support for your specific LCD panel you will have to
+ select the proper drivers which depend on this option.
+diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
+index 0c3ce46..526c54b 100644
+--- a/drivers/video/backlight/Makefile
++++ b/drivers/video/backlight/Makefile
+@@ -1,6 +1,8 @@
+ # Backlight & LCD drivers
+
+ obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
++obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
++
+ obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
+ obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
+ obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
+diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c
+new file mode 100644
+index 0000000..342b97a
+--- /dev/null
++++ b/drivers/video/backlight/ltv350qv.c
+@@ -0,0 +1,340 @@
++/*
++ * Power control for Samsung LTV350QV Quarter VGA LCD Panel
++ *
++ * Copyright (C) 2006, 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/lcd.h>
++#include <linux/module.h>
++#include <linux/spi/spi.h>
++
++#include "ltv350qv.h"
++
++#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
++
++struct ltv350qv {
++ struct spi_device *spi;
++ u8 *buffer;
++ int power;
++ struct lcd_device *ld;
++};
++
++/*
++ * The power-on and power-off sequences are taken from the
++ * LTV350QV-F04 data sheet from Samsung. The register definitions are
++ * taken from the S6F2002 command list also from Samsung. Both
++ * documents are distributed with the AVR32 Linux BSP CD from Atmel.
++ *
++ * There's still some voodoo going on here, but it's a lot better than
++ * in the first incarnation of the driver where all we had was the raw
++ * numbers from the initialization sequence.
++ */
++static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val)
++{
++ struct spi_message msg;
++ struct spi_transfer index_xfer = {
++ .len = 3,
++ .cs_change = 1,
++ };
++ struct spi_transfer value_xfer = {
++ .len = 3,
++ .cs_change = 1,
++ };
++
++ spi_message_init(&msg);
++
++ /* register index */
++ lcd->buffer[0] = LTV_OPC_INDEX;
++ lcd->buffer[1] = 0x00;
++ lcd->buffer[2] = reg & 0x7f;
++ index_xfer.tx_buf = lcd->buffer;
++ spi_message_add_tail(&index_xfer, &msg);
++
++ /* register value */
++ lcd->buffer[4] = LTV_OPC_DATA;
++ lcd->buffer[5] = val >> 8;
++ lcd->buffer[6] = val;
++ value_xfer.tx_buf = lcd->buffer + 4;
++ spi_message_add_tail(&value_xfer, &msg);
++
++ return spi_sync(lcd->spi, &msg);
++}
++
++/* The comments are taken straight from the data sheet */
++static int ltv350qv_power_on(struct ltv350qv *lcd)
++{
++ int ret;
++
++ /* Power On Reset Display off State */
++ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000))
++ goto err;
++ msleep(15);
++
++ /* Power Setting Function 1 */
++ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE))
++ goto err;
++ if (ltv350qv_write_reg(lcd, LTV_PWRCTL2, LTV_VCOML_ENABLE))
++ goto err_power1;
++
++ /* Power Setting Function 2 */
++ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++ LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
++ | LTV_SUPPLY_CURRENT(5)))
++ goto err_power2;
++
++ msleep(55);
++
++ /* Instruction Setting */
++ ret = ltv350qv_write_reg(lcd, LTV_IFCTL,
++ LTV_NMD | LTV_REV | LTV_NL(0x1d));
++ ret |= ltv350qv_write_reg(lcd, LTV_DATACTL,
++ LTV_DS_SAME | LTV_CHS_480
++ | LTV_DF_RGB | LTV_RGB_BGR);
++ ret |= ltv350qv_write_reg(lcd, LTV_ENTRY_MODE,
++ LTV_VSPL_ACTIVE_LOW
++ | LTV_HSPL_ACTIVE_LOW
++ | LTV_DPL_SAMPLE_RISING
++ | LTV_EPL_ACTIVE_LOW
++ | LTV_SS_RIGHT_TO_LEFT);
++ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL1, LTV_CLW(3));
++ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
++ LTV_NW_INV_1LINE | LTV_FWI(3));
++ ret |= ltv350qv_write_reg(lcd, LTV_VBP, 0x000a);
++ ret |= ltv350qv_write_reg(lcd, LTV_HBP, 0x0021);
++ ret |= ltv350qv_write_reg(lcd, LTV_SOTCTL, LTV_SDT(3) | LTV_EQ(0));
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(0), 0x0103);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(1), 0x0301);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(2), 0x1f0f);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(3), 0x1f0f);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(4), 0x0707);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(5), 0x0307);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(6), 0x0707);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(7), 0x0000);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(8), 0x0004);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(9), 0x0000);
++ if (ret)
++ goto err_settings;
++
++ /* Wait more than 2 frames */
++ msleep(20);
++
++ /* Display On Sequence */
++ ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++ LTV_VCOM_DISABLE | LTV_VCOMOUT_ENABLE
++ | LTV_POWER_ON | LTV_DRIVE_CURRENT(5)
++ | LTV_SUPPLY_CURRENT(5));
++ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
++ LTV_NW_INV_1LINE | LTV_DSC | LTV_FWI(3));
++ if (ret)
++ goto err_disp_on;
++
++ /* Display should now be ON. Phew. */
++ return 0;
++
++err_disp_on:
++ /*
++ * Try to recover. Error handling probably isn't very useful
++ * at this point, just make a best effort to switch the panel
++ * off.
++ */
++ ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++ LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
++ | LTV_SUPPLY_CURRENT(5));
++ ltv350qv_write_reg(lcd, LTV_GATECTL2,
++ LTV_NW_INV_1LINE | LTV_FWI(3));
++err_settings:
++err_power2:
++err_power1:
++ ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
++ msleep(1);
++err:
++ ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
++ return -EIO;
++}
++
++static int ltv350qv_power_off(struct ltv350qv *lcd)
++{
++ int ret;
++
++ /* Display Off Sequence */
++ ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++ LTV_VCOM_DISABLE
++ | LTV_DRIVE_CURRENT(5)
++ | LTV_SUPPLY_CURRENT(5));
++ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
++ LTV_NW_INV_1LINE | LTV_FWI(3));
++
++ /* Power down setting 1 */
++ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
++
++ /* Wait at least 1 ms */
++ msleep(1);
++
++ /* Power down setting 2 */
++ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
++
++ /*
++ * No point in trying to recover here. If we can't switch the
++ * panel off, what are we supposed to do other than inform the
++ * user about the failure?
++ */
++ if (ret)
++ return -EIO;
++
++ /* Display power should now be OFF */
++ return 0;
++}
++
++static int ltv350qv_power(struct ltv350qv *lcd, int power)
++{
++ int ret = 0;
++
++ if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
++ ret = ltv350qv_power_on(lcd);
++ else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
++ ret = ltv350qv_power_off(lcd);
++
++ if (!ret)
++ lcd->power = power;
++
++ return ret;
++}
++
++static int ltv350qv_set_power(struct lcd_device *ld, int power)
++{
++ struct ltv350qv *lcd;
++
++ lcd = class_get_devdata(&ld->class_dev);
++ return ltv350qv_power(lcd, power);
++}
++
++static int ltv350qv_get_power(struct lcd_device *ld)
++{
++ struct ltv350qv *lcd;
++
++ lcd = class_get_devdata(&ld->class_dev);
++ return lcd->power;
++}
++
++static struct lcd_ops ltv_ops = {
++ .get_power = ltv350qv_get_power,
++ .set_power = ltv350qv_set_power,
++};
++
++static int __devinit ltv350qv_probe(struct spi_device *spi)
++{
++ struct ltv350qv *lcd;
++ struct lcd_device *ld;
++ int ret;
++
++ lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL);
++ if (!lcd)
++ return -ENOMEM;
++
++ lcd->spi = spi;
++ lcd->power = FB_BLANK_POWERDOWN;
++ lcd->buffer = kzalloc(8, GFP_KERNEL);
++
++ ld = lcd_device_register("ltv350qv", lcd, &ltv_ops);
++ if (IS_ERR(ld)) {
++ ret = PTR_ERR(ld);
++ goto out_free_lcd;
++ }
++ lcd->ld = ld;
++
++ ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK);
++ if (ret)
++ goto out_unregister;
++
++ dev_set_drvdata(&spi->dev, lcd);
++
++ return 0;
++
++out_unregister:
++ lcd_device_unregister(ld);
++out_free_lcd:
++ kfree(lcd);
++ return ret;
++}
++
++static int __devexit ltv350qv_remove(struct spi_device *spi)
++{
++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++ ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++ lcd_device_unregister(lcd->ld);
++ kfree(lcd);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++static int ltv350qv_suspend(struct spi_device *spi,
++ pm_message_t state, u32 level)
++{
++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++ if (level == SUSPEND_POWER_DOWN)
++ return ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++
++ return 0;
++}
++
++static int ltv350qv_resume(struct spi_device *spi, u32 level)
++{
++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++ if (level == RESUME_POWER_ON)
++ return ltv350qv_power(lcd, FB_BLANK_UNBLANK);
++
++ return 0;
++}
++#else
++#define ltv350qv_suspend NULL
++#define ltv350qv_resume NULL
++#endif
++
++/* Power down all displays on reboot, poweroff or halt */
++static void ltv350qv_shutdown(struct spi_device *spi)
++{
++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++ ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++}
++
++static struct spi_driver ltv350qv_driver = {
++ .driver = {
++ .name = "ltv350qv",
++ .bus = &spi_bus_type,
++ .owner = THIS_MODULE,
++ },
++
++ .probe = ltv350qv_probe,
++ .remove = __devexit_p(ltv350qv_remove),
++ .shutdown = ltv350qv_shutdown,
++ .suspend = ltv350qv_suspend,
++ .resume = ltv350qv_resume,
++};
++
++static int __init ltv350qv_init(void)
++{
++ return spi_register_driver(&ltv350qv_driver);
++}
++
++static void __exit ltv350qv_exit(void)
++{
++ spi_unregister_driver(&ltv350qv_driver);
++}
++module_init(ltv350qv_init);
++module_exit(ltv350qv_exit);
++
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/video/backlight/ltv350qv.h b/drivers/video/backlight/ltv350qv.h
+new file mode 100644
+index 0000000..189112e
+--- /dev/null
++++ b/drivers/video/backlight/ltv350qv.h
+@@ -0,0 +1,95 @@
++/*
++ * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel
++ *
++ * Copyright (C) 2006, 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __LTV350QV_H
++#define __LTV350QV_H
++
++#define LTV_OPC_INDEX 0x74
++#define LTV_OPC_DATA 0x76
++
++#define LTV_ID 0x00 /* ID Read */
++#define LTV_IFCTL 0x01 /* Display Interface Control */
++#define LTV_DATACTL 0x02 /* Display Data Control */
++#define LTV_ENTRY_MODE 0x03 /* Entry Mode */
++#define LTV_GATECTL1 0x04 /* Gate Control 1 */
++#define LTV_GATECTL2 0x05 /* Gate Control 2 */
++#define LTV_VBP 0x06 /* Vertical Back Porch */
++#define LTV_HBP 0x07 /* Horizontal Back Porch */
++#define LTV_SOTCTL 0x08 /* Source Output Timing Control */
++#define LTV_PWRCTL1 0x09 /* Power Control 1 */
++#define LTV_PWRCTL2 0x0a /* Power Control 2 */
++#define LTV_GAMMA(x) (0x10 + (x)) /* Gamma control */
++
++/* Bit definitions for LTV_IFCTL */
++#define LTV_IM (1 << 15)
++#define LTV_NMD (1 << 14)
++#define LTV_SSMD (1 << 13)
++#define LTV_REV (1 << 7)
++#define LTV_NL(x) (((x) & 0x001f) << 0)
++
++/* Bit definitions for LTV_DATACTL */
++#define LTV_DS_SAME (0 << 12)
++#define LTV_DS_D_TO_S (1 << 12)
++#define LTV_DS_S_TO_D (2 << 12)
++#define LTV_CHS_384 (0 << 9)
++#define LTV_CHS_480 (1 << 9)
++#define LTV_CHS_492 (2 << 9)
++#define LTV_DF_RGB (0 << 6)
++#define LTV_DF_RGBX (1 << 6)
++#define LTV_DF_XRGB (2 << 6)
++#define LTV_RGB_RGB (0 << 2)
++#define LTV_RGB_BGR (1 << 2)
++#define LTV_RGB_GRB (2 << 2)
++#define LTV_RGB_RBG (3 << 2)
++
++/* Bit definitions for LTV_ENTRY_MODE */
++#define LTV_VSPL_ACTIVE_LOW (0 << 15)
++#define LTV_VSPL_ACTIVE_HIGH (1 << 15)
++#define LTV_HSPL_ACTIVE_LOW (0 << 14)
++#define LTV_HSPL_ACTIVE_HIGH (1 << 14)
++#define LTV_DPL_SAMPLE_RISING (0 << 13)
++#define LTV_DPL_SAMPLE_FALLING (1 << 13)
++#define LTV_EPL_ACTIVE_LOW (0 << 12)
++#define LTV_EPL_ACTIVE_HIGH (1 << 12)
++#define LTV_SS_LEFT_TO_RIGHT (0 << 8)
++#define LTV_SS_RIGHT_TO_LEFT (1 << 8)
++#define LTV_STB (1 << 1)
++
++/* Bit definitions for LTV_GATECTL1 */
++#define LTV_CLW(x) (((x) & 0x0007) << 12)
++#define LTV_GAON (1 << 5)
++#define LTV_SDR (1 << 3)
++
++/* Bit definitions for LTV_GATECTL2 */
++#define LTV_NW_INV_FRAME (0 << 14)
++#define LTV_NW_INV_1LINE (1 << 14)
++#define LTV_NW_INV_2LINE (2 << 14)
++#define LTV_DSC (1 << 12)
++#define LTV_GIF (1 << 8)
++#define LTV_FHN (1 << 7)
++#define LTV_FTI(x) (((x) & 0x0003) << 4)
++#define LTV_FWI(x) (((x) & 0x0003) << 0)
++
++/* Bit definitions for LTV_SOTCTL */
++#define LTV_SDT(x) (((x) & 0x0007) << 10)
++#define LTV_EQ(x) (((x) & 0x0007) << 2)
++
++/* Bit definitions for LTV_PWRCTL1 */
++#define LTV_VCOM_DISABLE (1 << 14)
++#define LTV_VCOMOUT_ENABLE (1 << 11)
++#define LTV_POWER_ON (1 << 9)
++#define LTV_DRIVE_CURRENT(x) (((x) & 0x0007) << 4) /* 0=off, 5=max */
++#define LTV_SUPPLY_CURRENT(x) (((x) & 0x0007) << 0) /* 0=off, 5=max */
++
++/* Bit definitions for LTV_PWRCTL2 */
++#define LTV_VCOML_ENABLE (1 << 13)
++#define LTV_VCOML_VOLTAGE(x) (((x) & 0x001f) << 8) /* 0=1V, 31=-1V */
++#define LTV_VCOMH_VOLTAGE(x) (((x) & 0x001f) << 0) /* 0=3V, 31=4.5V */
++
++#endif /* __LTV350QV_H */
+diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
+index 2822526..babf8a9 100644
+--- a/drivers/video/fbmem.c
++++ b/drivers/video/fbmem.c
+@@ -1198,6 +1198,10 @@ fb_mmap(struct file *file, struct vm_area_struct * vma)
+ pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE;
+ #elif defined(__arm__) || defined(__sh__) || defined(__m32r__)
+ vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
++#elif defined(__avr32__)
++ vma->vm_page_prot = __pgprot((pgprot_val(vma->vm_page_prot)
++ & ~_PAGE_CACHABLE)
++ | (_PAGE_BUFFER | _PAGE_DIRTY));
+ #elif defined(__ia64__)
+ if (efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start))
+ vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+diff --git a/include/asm-alpha/pgtable.h b/include/asm-alpha/pgtable.h
+index 49ac9be..616d206 100644
+--- a/include/asm-alpha/pgtable.h
++++ b/include/asm-alpha/pgtable.h
+@@ -345,10 +345,6 @@ extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
+ #define io_remap_pfn_range(vma, start, pfn, size, prot) \
+ remap_pfn_range(vma, start, pfn, size, prot)
+
+-#define MK_IOSPACE_PFN(space, pfn) (pfn)
+-#define GET_IOSPACE(pfn) 0
+-#define GET_PFN(pfn) (pfn)
+-
+ #define pte_ERROR(e) \
+ printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
+ #define pmd_ERROR(e) \
+diff --git a/include/asm-alpha/scatterlist.h b/include/asm-alpha/scatterlist.h
+index 6afb8bd..9173654 100644
+--- a/include/asm-alpha/scatterlist.h
++++ b/include/asm-alpha/scatterlist.h
+@@ -2,6 +2,7 @@
+ #define _ALPHA_SCATTERLIST_H
+
+ #include <asm/page.h>
++#include <asm/types.h>
+
+ struct scatterlist {
+ struct page *page;
+diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
+index d464ca5..7ef4eeb 100644
+--- a/include/asm-arm/arch-at91/cpu.h
++++ b/include/asm-arm/arch-at91/cpu.h
+@@ -68,4 +68,10 @@ static inline unsigned long at91_arch_identify(void)
+ #define cpu_is_at91sam9263() (0)
+ #endif
+
++/*
++ * Since this is ARM, we will never run on any AVR32 CPU. But these
++ * definitions may reduce clutter in common drivers.
++ */
++#define cpu_is_at32ap7000() (0)
++
+ #endif
+diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h
+index 7b1c9ac..0c8be19 100644
+--- a/include/asm-arm/pgtable-nommu.h
++++ b/include/asm-arm/pgtable-nommu.h
+@@ -83,10 +83,6 @@ extern int is_in_rom(unsigned long);
+ #define io_remap_page_range remap_page_range
+ #define io_remap_pfn_range remap_pfn_range
+
+-#define MK_IOSPACE_PFN(space, pfn) (pfn)
+-#define GET_IOSPACE(pfn) 0
+-#define GET_PFN(pfn) (pfn)
+-
+
+ /*
+ * All 32bit addresses are effectively valid for vmalloc...
+diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h
+index 7b2bafc..21dec9f 100644
+--- a/include/asm-arm/pgtable.h
++++ b/include/asm-arm/pgtable.h
+@@ -395,10 +395,6 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+ #define io_remap_pfn_range(vma,from,pfn,size,prot) \
+ remap_pfn_range(vma, from, pfn, size, prot)
+
+-#define MK_IOSPACE_PFN(space, pfn) (pfn)
+-#define GET_IOSPACE(pfn) 0
+-#define GET_PFN(pfn) (pfn)
+-
+ #define pgtable_cache_init() do { } while (0)
+
+ #endif /* !__ASSEMBLY__ */
+diff --git a/include/asm-arm26/pgtable.h b/include/asm-arm26/pgtable.h
+index 63a8881..2b20e9f 100644
+--- a/include/asm-arm26/pgtable.h
++++ b/include/asm-arm26/pgtable.h
+@@ -297,10 +297,6 @@ static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot)
+ #define io_remap_pfn_range(vma,from,pfn,size,prot) \
+ remap_pfn_range(vma, from, pfn, size, prot)
+
+-#define MK_IOSPACE_PFN(space, pfn) (pfn)
+-#define GET_IOSPACE(pfn) 0
+-#define GET_PFN(pfn) (pfn)
+-
+ #endif /* !__ASSEMBLY__ */
+
+ #endif /* _ASMARM_PGTABLE_H */
+diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
+index 1a7b07d..2293ab0 100644
+--- a/include/asm-avr32/arch-at32ap/board.h
++++ b/include/asm-avr32/arch-at32ap/board.h
+@@ -6,6 +6,8 @@
+
+ #include <linux/types.h>
+
++#define GPIO_PIN_NONE (-1)
++
+ /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
+ void at32_add_system_devices(void);
+
+@@ -30,11 +32,46 @@ struct spi_board_info;
+ struct platform_device *
+ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
+
+-struct lcdc_platform_data {
+- unsigned long fbmem_start;
+- unsigned long fbmem_size;
++struct platform_device *at32_add_device_twi(unsigned int id);
++
++struct mci_platform_data {
++ int detect_pin;
++ int wp_pin;
++};
++struct platform_device *
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
++struct platform_device *at32_add_device_usba(unsigned int id);
++
++struct atmel_lcdfb_info;
++struct platform_device *
++at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
++ unsigned long fbmem_start, unsigned long fbmem_len);
++
++struct platform_device *at32_add_device_ac97c(unsigned int id);
++struct platform_device *at32_add_device_abdac(unsigned int id);
++
++struct cf_platform_data {
++ int detect_pin;
++ int reset_pin;
++ int vcc_pin;
++ u8 cs;
+ };
+ struct platform_device *
+-at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data);
++at32_add_device_cf(unsigned int id, unsigned int extint,
++ struct cf_platform_data *data);
++
++/* depending on what's hooked up, not all SSC pins will be used */
++#define ATMEL_SSC_TK 0x01
++#define ATMEL_SSC_TF 0x02
++#define ATMEL_SSC_TD 0x04
++#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
++
++#define ATMEL_SSC_RK 0x10
++#define ATMEL_SSC_RF 0x20
++#define ATMEL_SSC_RD 0x40
++#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
++
++struct platform_device *
++at32_add_device_ssc(unsigned int id, unsigned int flags);
+
+ #endif /* __ASM_ARCH_BOARD_H */
+diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/include/asm-avr32/arch-at32ap/cpu.h
+new file mode 100644
+index 0000000..2bdc5bd
+--- /dev/null
++++ b/include/asm-avr32/arch-at32ap/cpu.h
+@@ -0,0 +1,33 @@
++/*
++ * AVR32 and (fake) AT91 CPU identification
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_ARCH_CPU_H
++#define __ASM_ARCH_CPU_H
++
++/*
++ * Only AT32AP7000 is defined for now. We can identify the specific
++ * chip at runtime, but I'm not sure if it's really worth it.
++ */
++#ifdef CONFIG_CPU_AT32AP7000
++# define cpu_is_at32ap7000() (1)
++#else
++# define cpu_is_at32ap7000() (0)
++#endif
++
++/*
++ * Since this is AVR32, we will never run on any AT91 CPU. But these
++ * definitions may reduce clutter in common drivers.
++ */
++#define cpu_is_at91rm9200() (0)
++#define cpu_is_at91sam9xe() (0)
++#define cpu_is_at91sam9260() (0)
++#define cpu_is_at91sam9261() (0)
++#define cpu_is_at91sam9263() (0)
++
++#endif /* __ASM_ARCH_CPU_H */
+diff --git a/include/asm-avr32/arch-at32ap/gpio.h b/include/asm-avr32/arch-at32ap/gpio.h
+index 80a21aa..af7f953 100644
+--- a/include/asm-avr32/arch-at32ap/gpio.h
++++ b/include/asm-avr32/arch-at32ap/gpio.h
+@@ -14,6 +14,8 @@ int gpio_direction_output(unsigned int gpio, int value);
+ int gpio_get_value(unsigned int gpio);
+ void gpio_set_value(unsigned int gpio, int value);
+
++#include <asm-generic/gpio.h> /* cansleep wrappers */
++
+ static inline int gpio_to_irq(unsigned int gpio)
+ {
+ return gpio + GPIO_IRQ_BASE;
+diff --git a/include/asm-avr32/arch-at32ap/io.h b/include/asm-avr32/arch-at32ap/io.h
+new file mode 100644
+index 0000000..ee59e40
+--- /dev/null
++++ b/include/asm-avr32/arch-at32ap/io.h
+@@ -0,0 +1,39 @@
++#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
++#define __ASM_AVR32_ARCH_AT32AP_IO_H
++
++/* For "bizarre" halfword swapping */
++#include <linux/byteorder/swabb.h>
++
++#if defined(CONFIG_AP7000_32_BIT_SMC)
++# define __swizzle_addr_b(addr) (addr ^ 3UL)
++# define __swizzle_addr_w(addr) (addr ^ 2UL)
++# define __swizzle_addr_l(addr) (addr)
++# define ioswabb(a, x) (x)
++# define ioswabw(a, x) (x)
++# define ioswabl(a, x) (x)
++# define __mem_ioswabb(a, x) (x)
++# define __mem_ioswabw(a, x) swab16(x)
++# define __mem_ioswabl(a, x) swab32(x)
++#elif defined(CONFIG_AP7000_16_BIT_SMC)
++# define __swizzle_addr_b(addr) (addr ^ 1UL)
++# define __swizzle_addr_w(addr) (addr)
++# define __swizzle_addr_l(addr) (addr)
++# define ioswabb(a, x) (x)
++# define ioswabw(a, x) (x)
++# define ioswabl(a, x) swahw32(x)
++# define __mem_ioswabb(a, x) (x)
++# define __mem_ioswabw(a, x) swab16(x)
++# define __mem_ioswabl(a, x) swahb32(x)
++#else
++# define __swizzle_addr_b(addr) (addr)
++# define __swizzle_addr_w(addr) (addr)
++# define __swizzle_addr_l(addr) (addr)
++# define ioswabb(a, x) (x)
++# define ioswabw(a, x) swab16(x)
++# define ioswabl(a, x) swab32(x)
++# define __mem_ioswabb(a, x) (x)
++# define __mem_ioswabw(a, x) (x)
++# define __mem_ioswabl(a, x) (x)
++#endif
++
++#endif /* __ASM_AVR32_ARCH_AT32AP_IO_H */
+diff --git a/include/asm-avr32/arch-at32ap/smc.h b/include/asm-avr32/arch-at32ap/smc.h
+index 3732b32..07152b7 100644
+--- a/include/asm-avr32/arch-at32ap/smc.h
++++ b/include/asm-avr32/arch-at32ap/smc.h
+@@ -48,10 +48,32 @@ struct smc_config {
+ unsigned int nwe_controlled:1;
+
+ /*
++ * 0: NWAIT is disabled
++ * 1: Reserved
++ * 2: NWAIT is frozen mode
++ * 3: NWAIT in ready mode
++ */
++ unsigned int nwait_mode:2;
++
++ /*
+ * 0: Byte select access type
+ * 1: Byte write access type
+ */
+ unsigned int byte_write:1;
++
++ /*
++ * Number of clock cycles before data is released after
++ * the rising edge of the read controlling signal
++ *
++ * Total cycles from SMC is tdf_cycles + 1
++ */
++ unsigned int tdf_cycles:4;
++
++ /*
++ * 0: TDF optimization disabled
++ * 1: TDF optimization enabled
++ */
++ unsigned int tdf_mode:1;
+ };
+
+ extern int smc_set_configuration(int cs, const struct smc_config *config);
+diff --git a/include/asm-avr32/arch-at32ap/time.h b/include/asm-avr32/arch-at32ap/time.h
+new file mode 100644
+index 0000000..cc8a434
+--- /dev/null
++++ b/include/asm-avr32/arch-at32ap/time.h
+@@ -0,0 +1,112 @@
++/*
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef _ASM_AVR32_ARCH_AT32AP_TIME_H
++#define _ASM_AVR32_ARCH_AT32AP_TIME_H
++
++#include <linux/platform_device.h>
++
++extern struct irqaction timer_irqaction;
++extern struct platform_device at32_systc0_device;
++extern void local_timer_interrupt(int irq, void *dev_id);
++
++#define TIMER_BCR 0x000000c0
++#define TIMER_BCR_SYNC 0
++#define TIMER_BMR 0x000000c4
++#define TIMER_BMR_TC0XC0S 0
++#define TIMER_BMR_TC1XC1S 2
++#define TIMER_BMR_TC2XC2S 4
++#define TIMER_CCR 0x00000000
++#define TIMER_CCR_CLKDIS 1
++#define TIMER_CCR_CLKEN 0
++#define TIMER_CCR_SWTRG 2
++#define TIMER_CMR 0x00000004
++#define TIMER_CMR_ABETRG 10
++#define TIMER_CMR_ACPA 16
++#define TIMER_CMR_ACPC 18
++#define TIMER_CMR_AEEVT 20
++#define TIMER_CMR_ASWTRG 22
++#define TIMER_CMR_BCPB 24
++#define TIMER_CMR_BCPC 26
++#define TIMER_CMR_BEEVT 28
++#define TIMER_CMR_BSWTRG 30
++#define TIMER_CMR_BURST 4
++#define TIMER_CMR_CLKI 3
++#define TIMER_CMR_CPCDIS 7
++#define TIMER_CMR_CPCSTOP 6
++#define TIMER_CMR_CPCTRG 14
++#define TIMER_CMR_EEVT 10
++#define TIMER_CMR_EEVTEDG 8
++#define TIMER_CMR_ENETRG 12
++#define TIMER_CMR_ETRGEDG 8
++#define TIMER_CMR_LDBDIS 7
++#define TIMER_CMR_LDBSTOP 6
++#define TIMER_CMR_LDRA 16
++#define TIMER_CMR_LDRB 18
++#define TIMER_CMR_TCCLKS 0
++#define TIMER_CMR_WAVE 15
++#define TIMER_CMR_WAVSEL 13
++#define TIMER_CV 0x00000010
++#define TIMER_CV_CV 0
++#define TIMER_IDR 0x00000028
++#define TIMER_IDR_COVFS 0
++#define TIMER_IDR_CPAS 2
++#define TIMER_IDR_CPBS 3
++#define TIMER_IDR_CPCS 4
++#define TIMER_IDR_ETRGS 7
++#define TIMER_IDR_LDRAS 5
++#define TIMER_IDR_LDRBS 6
++#define TIMER_IDR_LOVRS 1
++#define TIMER_IER 0x00000024
++#define TIMER_IER_COVFS 0
++#define TIMER_IER_CPAS 2
++#define TIMER_IER_CPBS 3
++#define TIMER_IER_CPCS 4
++#define TIMER_IER_ETRGS 7
++#define TIMER_IER_LDRAS 5
++#define TIMER_IER_LDRBS 6
++#define TIMER_IER_LOVRS 1
++#define TIMER_IMR 0x0000002c
++#define TIMER_IMR_COVFS 0
++#define TIMER_IMR_CPAS 2
++#define TIMER_IMR_CPBS 3
++#define TIMER_IMR_CPCS 4
++#define TIMER_IMR_ETRGS 7
++#define TIMER_IMR_LDRAS 5
++#define TIMER_IMR_LDRBS 6
++#define TIMER_IMR_LOVRS 1
++#define TIMER_RA 0x00000014
++#define TIMER_RA_RA 0
++#define TIMER_RB 0x00000018
++#define TIMER_RB_RB 0
++#define TIMER_RC 0x0000001c
++#define TIMER_RC_RC 0
++#define TIMER_SR 0x00000020
++#define TIMER_SR_CLKSTA 16
++#define TIMER_SR_COVFS 0
++#define TIMER_SR_CPAS 2
++#define TIMER_SR_CPBS 3
++#define TIMER_SR_CPCS 4
++#define TIMER_SR_ETRGS 7
++#define TIMER_SR_LDRAS 5
++#define TIMER_SR_LDRBS 6
++#define TIMER_SR_LOVRS 1
++#define TIMER_SR_MTIOA 17
++#define TIMER_SR_MTIOB 18
++
++/* Bit manipulation macros */
++#define TIMER_BIT(name) (1 << TIMER_##name)
++#define TIMER_BF(name,value) ((value) << TIMER_##name)
++
++/* Register access macros */
++#define timer_read(port,instance,reg) \
++ __raw_readl(port + (0x40 * instance) + TIMER_##reg)
++#define timer_write(port,instance,reg,value) \
++ __raw_writel((value), port + (0x40 * instance) + TIMER_##reg)
++
++#endif /* _ASM_AVR32_ARCH_AT32AP_TIME_H */
+diff --git a/include/asm-avr32/atomic.h b/include/asm-avr32/atomic.h
+index c40b603..b9c2548 100644
+--- a/include/asm-avr32/atomic.h
++++ b/include/asm-avr32/atomic.h
+@@ -173,7 +173,7 @@ static inline int atomic_sub_if_positive(int i, atomic_t *v)
+ }
+
+ #define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+-#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
++#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+
+ #define atomic_sub(i, v) (void)atomic_sub_return(i, v)
+ #define atomic_add(i, v) (void)atomic_add_return(i, v)
+diff --git a/include/asm-avr32/bug.h b/include/asm-avr32/bug.h
+index 521766b..afdcd79 100644
+--- a/include/asm-avr32/bug.h
++++ b/include/asm-avr32/bug.h
+@@ -18,27 +18,53 @@
+
+ #ifdef CONFIG_DEBUG_BUGVERBOSE
+
+-#define BUG() \
+- do { \
+- asm volatile(".hword %0\n\t" \
+- ".hword %1\n\t" \
+- ".long %2" \
+- : \
+- : "n"(AVR32_BUG_OPCODE), \
+- "i"(__LINE__), "X"(__FILE__)); \
+- } while (0)
++#define _BUG_OR_WARN(flags) \
++ asm volatile( \
++ "1: .hword %0\n" \
++ " .section __bug_table,\"a\",@progbits\n" \
++ "2: .long 1b\n" \
++ " .long %1\n" \
++ " .short %2\n" \
++ " .short %3\n" \
++ " .org 2b + %4\n" \
++ " .previous" \
++ : \
++ : "i"(AVR32_BUG_OPCODE), "i"(__FILE__), \
++ "i"(__LINE__), "i"(flags), \
++ "i"(sizeof(struct bug_entry)))
+
+ #else
+
++#define _BUG_OR_WARN(flags) \
++ asm volatile( \
++ "1: .hword %0\n" \
++ " .section __bug_table,\"a\",@progbits\n" \
++ "2: .long 1b\n" \
++ " .short %1\n" \
++ " .org 2b + %2\n" \
++ " .previous" \
++ : \
++ : "i"(AVR32_BUG_OPCODE), "i"(flags), \
++ "i"(sizeof(struct bug_entry)))
++
++#endif /* CONFIG_DEBUG_BUGVERBOSE */
++
+ #define BUG() \
+ do { \
+- asm volatile(".hword %0\n\t" \
+- : : "n"(AVR32_BUG_OPCODE)); \
++ _BUG_OR_WARN(0); \
++ for (;;); \
+ } while (0)
+
+-#endif /* CONFIG_DEBUG_BUGVERBOSE */
++#define WARN_ON(condition) \
++ ({ \
++ typeof(condition) __ret_warn_on = (condition); \
++ if (unlikely(__ret_warn_on)) \
++ _BUG_OR_WARN(BUGFLAG_WARNING); \
++ unlikely(__ret_warn_on); \
++ })
+
+ #define HAVE_ARCH_BUG
++#define HAVE_ARCH_WARN_ON
+
+ #endif /* CONFIG_BUG */
+
+diff --git a/include/asm-avr32/dma-controller.h b/include/asm-avr32/dma-controller.h
+new file mode 100644
+index 0000000..56a4965
+--- /dev/null
++++ b/include/asm-avr32/dma-controller.h
+@@ -0,0 +1,166 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_AVR32_DMA_CONTROLLER_H
++#define __ASM_AVR32_DMA_CONTROLLER_H
++
++#include <linux/device.h>
++
++#define DMA_DIR_MEM_TO_MEM 0x0000
++#define DMA_DIR_MEM_TO_PERIPH 0x0001
++#define DMA_DIR_PERIPH_TO_MEM 0x0002
++#define DMA_DIR_PERIPH_TO_PERIPH 0x0003
++
++#define DMA_WIDTH_8BIT 0
++#define DMA_WIDTH_16BIT 1
++#define DMA_WIDTH_32BIT 2
++
++struct dma_request {
++ struct dma_controller *dmac;
++ struct list_head list;
++
++ unsigned short channel;
++
++ void (*xfer_complete)(struct dma_request *req);
++ void (*block_complete)(struct dma_request *req);
++ void (*error)(struct dma_request *req);
++};
++
++struct dma_request_sg {
++ struct dma_request req;
++
++ int nr_sg;
++ struct scatterlist *sg;
++ unsigned long block_size;
++ unsigned int nr_blocks;
++
++ dma_addr_t data_reg;
++ unsigned short periph_id;
++
++ unsigned char direction;
++ unsigned char width;
++};
++#define to_dma_request_sg(_req) \
++ container_of(_req, struct dma_request_sg, req)
++
++struct dma_request_cyclic {
++ struct dma_request req;
++
++ int periods;
++ unsigned long buffer_size;
++
++ dma_addr_t buffer_start;
++ dma_addr_t data_reg;
++
++ unsigned short periph_id;
++ unsigned char direction;
++ unsigned char width;
++
++ void *dev_id;
++};
++#define to_dma_request_cyclic(_req) \
++ container_of(_req, struct dma_request_cyclic, req)
++
++struct dma_request_memcpy {
++ struct dma_request req;
++
++ dma_addr_t src_addr;
++ unsigned int src_width;
++ unsigned int src_stride;
++
++ dma_addr_t dst_addr;
++ unsigned int dst_width;
++ unsigned int dst_stride;
++
++ size_t length;
++
++ unsigned short src_reverse:1;
++ unsigned short dst_reverse:1;
++};
++#define to_dma_request_memcpy(_req) \
++ container_of(_req, struct dma_request_memcpy, req)
++
++struct dma_controller {
++ struct list_head list;
++ int id;
++ struct device *dev;
++
++ int (*alloc_channel)(struct dma_controller *dmac);
++ void (*release_channel)(struct dma_controller *dmac,
++ int channel);
++ int (*prepare_request_sg)(struct dma_controller *dmac,
++ struct dma_request_sg *req);
++ int (*prepare_request_cyclic)(struct dma_controller *dmac,
++ struct dma_request_cyclic *req);
++ int (*prepare_request_memcpy)(struct dma_controller *dmac,
++ struct dma_request_memcpy *req);
++ int (*start_request)(struct dma_controller *dmac,
++ unsigned int channel);
++ int (*stop_request)(struct dma_controller *dmac,
++ unsigned int channel);
++ dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
++ unsigned int channel);
++};
++
++static inline int
++dma_alloc_channel(struct dma_controller *dmac)
++{
++ return dmac->alloc_channel(dmac);
++}
++
++static inline void
++dma_release_channel(struct dma_controller *dmac, int chan)
++{
++ dmac->release_channel(dmac, chan);
++}
++
++static inline int
++dma_prepare_request_sg(struct dma_controller *dmac,
++ struct dma_request_sg *req)
++{
++ return dmac->prepare_request_sg(dmac, req);
++}
++
++static inline int
++dma_prepare_request_cyclic(struct dma_controller *dmac,
++ struct dma_request_cyclic *req)
++{
++ return dmac->prepare_request_cyclic(dmac, req);
++}
++
++static inline int
++dma_prepare_request_memcpy(struct dma_controller *dmac,
++ struct dma_request_memcpy *req)
++{
++ return dmac->prepare_request_memcpy(dmac, req);
++}
++
++static inline int
++dma_start_request(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->start_request(dmac, channel);
++}
++
++static inline int
++dma_stop_request(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->stop_request(dmac, channel);
++}
++
++static inline dma_addr_t
++dma_get_current_pos(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->get_current_pos(dmac, channel);
++}
++
++extern int register_dma_controller(struct dma_controller *dmac);
++extern struct dma_controller *find_dma_controller(int id);
++
++#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
+diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h
+index c08e810..e30d4b3 100644
+--- a/include/asm-avr32/io.h
++++ b/include/asm-avr32/io.h
+@@ -1,13 +1,15 @@
+ #ifndef __ASM_AVR32_IO_H
+ #define __ASM_AVR32_IO_H
+
++#include <linux/kernel.h>
+ #include <linux/string.h>
+-
+-#ifdef __KERNEL__
++#include <linux/types.h>
+
+ #include <asm/addrspace.h>
+ #include <asm/byteorder.h>
+
++#include <asm/arch/io.h>
++
+ /* virt_to_phys will only work when address is in P1 or P2 */
+ static __inline__ unsigned long virt_to_phys(volatile void *address)
+ {
+@@ -36,104 +38,215 @@ extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
+ extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
+ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
+
+-static inline void writeb(unsigned char b, volatile void __iomem *addr)
++static inline void __raw_writeb(u8 v, volatile void __iomem *addr)
+ {
+- *(volatile unsigned char __force *)addr = b;
++ *(volatile u8 __force *)addr = v;
+ }
+-static inline void writew(unsigned short b, volatile void __iomem *addr)
++static inline void __raw_writew(u16 v, volatile void __iomem *addr)
+ {
+- *(volatile unsigned short __force *)addr = b;
++ *(volatile u16 __force *)addr = v;
+ }
+-static inline void writel(unsigned int b, volatile void __iomem *addr)
++static inline void __raw_writel(u32 v, volatile void __iomem *addr)
+ {
+- *(volatile unsigned int __force *)addr = b;
++ *(volatile u32 __force *)addr = v;
+ }
+-#define __raw_writeb writeb
+-#define __raw_writew writew
+-#define __raw_writel writel
+
+-static inline unsigned char readb(const volatile void __iomem *addr)
++static inline u8 __raw_readb(const volatile void __iomem *addr)
+ {
+- return *(const volatile unsigned char __force *)addr;
++ return *(const volatile u8 __force *)addr;
+ }
+-static inline unsigned short readw(const volatile void __iomem *addr)
++static inline u16 __raw_readw(const volatile void __iomem *addr)
+ {
+- return *(const volatile unsigned short __force *)addr;
++ return *(const volatile u16 __force *)addr;
+ }
+-static inline unsigned int readl(const volatile void __iomem *addr)
++static inline u32 __raw_readl(const volatile void __iomem *addr)
+ {
+- return *(const volatile unsigned int __force *)addr;
++ return *(const volatile u32 __force *)addr;
++}
++
++/* Convert I/O port address to virtual address */
++#ifndef __io
++# define __io(p) ((void *)phys_to_uncached(p))
++#endif
++
++/*
++ * Not really sure about the best way to slow down I/O on
++ * AVR32. Defining it as a no-op until we have an actual test case.
++ */
++#define SLOW_DOWN_IO do { } while (0)
++
++#define __BUILD_MEMORY_SINGLE(pfx, bwl, type) \
++static inline void \
++pfx##write##bwl(type val, volatile void __iomem *addr) \
++{ \
++ volatile type *__addr; \
++ type __val; \
++ \
++ __addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \
++ __val = pfx##ioswab##bwl(__addr, val); \
++ \
++ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
++ \
++ *__addr = __val; \
++} \
++ \
++static inline type pfx##read##bwl(const volatile void __iomem *addr) \
++{ \
++ volatile type *__addr; \
++ type __val; \
++ \
++ __addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \
++ \
++ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
++ \
++ __val = *__addr; \
++ return pfx##ioswab##bwl(__addr, __val); \
++}
++
++#define __BUILD_IOPORT_SINGLE(pfx, bwl, type, p, slow) \
++static inline void pfx##out##bwl##p(type val, unsigned long port) \
++{ \
++ volatile type *__addr; \
++ type __val; \
++ \
++ __addr = __io(__swizzle_addr_##bwl(port)); \
++ __val = pfx##ioswab##bwl(__addr, val); \
++ \
++ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
++ \
++ *__addr = __val; \
++ slow; \
++} \
++ \
++static inline type pfx##in##bwl##p(unsigned long port) \
++{ \
++ volatile type *__addr; \
++ type __val; \
++ \
++ __addr = __io(__swizzle_addr_##bwl(port)); \
++ \
++ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
++ \
++ __val = *__addr; \
++ slow; \
++ \
++ return pfx##ioswab##bwl(__addr, __val); \
++}
++
++#define __BUILD_MEMORY_PFX(bus, bwl, type) \
++ __BUILD_MEMORY_SINGLE(bus, bwl, type)
++
++#define BUILDIO_MEM(bwl, type) \
++ __BUILD_MEMORY_PFX(, bwl, type) \
++ __BUILD_MEMORY_PFX(__mem_, bwl, type)
++
++#define __BUILD_IOPORT_PFX(bus, bwl, type) \
++ __BUILD_IOPORT_SINGLE(bus, bwl, type, ,) \
++ __BUILD_IOPORT_SINGLE(bus, bwl, type, _p, SLOW_DOWN_IO)
++
++#define BUILDIO_IOPORT(bwl, type) \
++ __BUILD_IOPORT_PFX(, bwl, type) \
++ __BUILD_IOPORT_PFX(__mem_, bwl, type)
++
++BUILDIO_MEM(b, u8)
++BUILDIO_MEM(w, u16)
++BUILDIO_MEM(l, u32)
++
++BUILDIO_IOPORT(b, u8)
++BUILDIO_IOPORT(w, u16)
++BUILDIO_IOPORT(l, u32)
++
++#define readb_relaxed readb
++#define readw_relaxed readw
++#define readl_relaxed readl
++
++#define __BUILD_MEMORY_STRING(bwl, type) \
++static inline void writes##bwl(volatile void __iomem *addr, \
++ const void *data, unsigned int count) \
++{ \
++ const type *__data = data; \
++ \
++ while (count--) \
++ __mem_write##bwl(*__data++, addr); \
++} \
++ \
++static inline void reads##bwl(const volatile void __iomem *addr, \
++ void *data, unsigned int count) \
++{ \
++ type *__data = data; \
++ \
++ while (count--) \
++ *__data++ = __mem_read##bwl(addr); \
+ }
+-#define __raw_readb readb
+-#define __raw_readw readw
+-#define __raw_readl readl
+
+-#define writesb(p, d, l) __raw_writesb((unsigned int)p, d, l)
+-#define writesw(p, d, l) __raw_writesw((unsigned int)p, d, l)
+-#define writesl(p, d, l) __raw_writesl((unsigned int)p, d, l)
++#define __BUILD_IOPORT_STRING(bwl, type) \
++static inline void outs##bwl(unsigned long port, const void *data, \
++ unsigned int count) \
++{ \
++ const type *__data = data; \
++ \
++ while (count--) \
++ __mem_out##bwl(*__data++, port); \
++} \
++ \
++static inline void ins##bwl(unsigned long port, void *data, \
++ unsigned int count) \
++{ \
++ type *__data = data; \
++ \
++ while (count--) \
++ *__data++ = __mem_in##bwl(port); \
++}
+
+-#define readsb(p, d, l) __raw_readsb((unsigned int)p, d, l)
+-#define readsw(p, d, l) __raw_readsw((unsigned int)p, d, l)
+-#define readsl(p, d, l) __raw_readsl((unsigned int)p, d, l)
++#define BUILDSTRING(bwl, type) \
++ __BUILD_MEMORY_STRING(bwl, type) \
++ __BUILD_IOPORT_STRING(bwl, type)
+
++BUILDSTRING(b, u8)
++BUILDSTRING(w, u16)
++BUILDSTRING(l, u32)
+
+ /*
+ * io{read,write}{8,16,32} macros in both le (for PCI style consumers) and native be
+ */
+ #ifndef ioread8
+
+-#define ioread8(p) ({ unsigned int __v = __raw_readb(p); __v; })
++#define ioread8(p) ((unsigned int)readb(p))
+
+-#define ioread16(p) ({ unsigned int __v = le16_to_cpu(__raw_readw(p)); __v; })
+-#define ioread16be(p) ({ unsigned int __v = be16_to_cpu(__raw_readw(p)); __v; })
++#define ioread16(p) ((unsigned int)readw(p))
++#define ioread16be(p) ((unsigned int)__raw_readw(p))
+
+-#define ioread32(p) ({ unsigned int __v = le32_to_cpu(__raw_readl(p)); __v; })
+-#define ioread32be(p) ({ unsigned int __v = be32_to_cpu(__raw_readl(p)); __v; })
++#define ioread32(p) ((unsigned int)readl(p))
++#define ioread32be(p) ((unsigned int)__raw_readl(p))
+
+-#define iowrite8(v,p) __raw_writeb(v, p)
++#define iowrite8(v,p) writeb(v, p)
+
+-#define iowrite16(v,p) __raw_writew(cpu_to_le16(v), p)
+-#define iowrite16be(v,p) __raw_writew(cpu_to_be16(v), p)
++#define iowrite16(v,p) writew(v, p)
++#define iowrite16be(v,p) __raw_writew(v, p)
+
+-#define iowrite32(v,p) __raw_writel(cpu_to_le32(v), p)
+-#define iowrite32be(v,p) __raw_writel(cpu_to_be32(v), p)
++#define iowrite32(v,p) writel(v, p)
++#define iowrite32be(v,p) __raw_writel(v, p)
+
+-#define ioread8_rep(p,d,c) __raw_readsb(p,d,c)
+-#define ioread16_rep(p,d,c) __raw_readsw(p,d,c)
+-#define ioread32_rep(p,d,c) __raw_readsl(p,d,c)
++#define ioread8_rep(p,d,c) readsb(p,d,c)
++#define ioread16_rep(p,d,c) readsw(p,d,c)
++#define ioread32_rep(p,d,c) readsl(p,d,c)
+
+-#define iowrite8_rep(p,s,c) __raw_writesb(p,s,c)
+-#define iowrite16_rep(p,s,c) __raw_writesw(p,s,c)
+-#define iowrite32_rep(p,s,c) __raw_writesl(p,s,c)
++#define iowrite8_rep(p,s,c) writesb(p,s,c)
++#define iowrite16_rep(p,s,c) writesw(p,s,c)
++#define iowrite32_rep(p,s,c) writesl(p,s,c)
+
+ #endif
+
+-
+-/*
+- * These two are only here because ALSA _thinks_ it needs them...
+- */
+ static inline void memcpy_fromio(void * to, const volatile void __iomem *from,
+ unsigned long count)
+ {
+- char *p = to;
+- while (count) {
+- count--;
+- *p = readb(from);
+- p++;
+- from++;
+- }
++ memcpy(to, (const void __force *)from, count);
+ }
+
+ static inline void memcpy_toio(volatile void __iomem *to, const void * from,
+ unsigned long count)
+ {
+- const char *p = from;
+- while (count) {
+- count--;
+- writeb(*p, to);
+- p++;
+- to++;
+- }
++ memcpy((void __force *)to, from, count);
+ }
+
+ static inline void memset_io(volatile void __iomem *addr, unsigned char val,
+@@ -142,99 +255,8 @@ static inline void memset_io(volatile void __iomem *addr, unsigned char val,
+ memset((void __force *)addr, val, count);
+ }
+
+-/*
+- * Bad read/write accesses...
+- */
+-extern void __readwrite_bug(const char *fn);
+-
+ #define IO_SPACE_LIMIT 0xffffffff
+
+-/* Convert I/O port address to virtual address */
+-#define __io(p) ((void __iomem *)phys_to_uncached(p))
+-
+-/*
+- * IO port access primitives
+- * -------------------------
+- *
+- * The AVR32 doesn't have special IO access instructions; all IO is memory
+- * mapped. Note that these are defined to perform little endian accesses
+- * only. Their primary purpose is to access PCI and ISA peripherals.
+- *
+- * Note that for a big endian machine, this implies that the following
+- * big endian mode connectivity is in place.
+- *
+- * The machine specific io.h include defines __io to translate an "IO"
+- * address to a memory address.
+- *
+- * Note that we prevent GCC re-ordering or caching values in expressions
+- * by introducing sequence points into the in*() definitions. Note that
+- * __raw_* do not guarantee this behaviour.
+- *
+- * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
+- */
+-#define outb(v, p) __raw_writeb(v, __io(p))
+-#define outw(v, p) __raw_writew(cpu_to_le16(v), __io(p))
+-#define outl(v, p) __raw_writel(cpu_to_le32(v), __io(p))
+-
+-#define inb(p) __raw_readb(__io(p))
+-#define inw(p) le16_to_cpu(__raw_readw(__io(p)))
+-#define inl(p) le32_to_cpu(__raw_readl(__io(p)))
+-
+-static inline void __outsb(unsigned long port, void *addr, unsigned int count)
+-{
+- while (count--) {
+- outb(*(u8 *)addr, port);
+- addr++;
+- }
+-}
+-
+-static inline void __insb(unsigned long port, void *addr, unsigned int count)
+-{
+- while (count--) {
+- *(u8 *)addr = inb(port);
+- addr++;
+- }
+-}
+-
+-static inline void __outsw(unsigned long port, void *addr, unsigned int count)
+-{
+- while (count--) {
+- outw(*(u16 *)addr, port);
+- addr += 2;
+- }
+-}
+-
+-static inline void __insw(unsigned long port, void *addr, unsigned int count)
+-{
+- while (count--) {
+- *(u16 *)addr = inw(port);
+- addr += 2;
+- }
+-}
+-
+-static inline void __outsl(unsigned long port, void *addr, unsigned int count)
+-{
+- while (count--) {
+- outl(*(u32 *)addr, port);
+- addr += 4;
+- }
+-}
+-
+-static inline void __insl(unsigned long port, void *addr, unsigned int count)
+-{
+- while (count--) {
+- *(u32 *)addr = inl(port);
+- addr += 4;
+- }
+-}
+-
+-#define outsb(port, addr, count) __outsb(port, addr, count)
+-#define insb(port, addr, count) __insb(port, addr, count)
+-#define outsw(port, addr, count) __outsw(port, addr, count)
+-#define insw(port, addr, count) __insw(port, addr, count)
+-#define outsl(port, addr, count) __outsl(port, addr, count)
+-#define insl(port, addr, count) __insl(port, addr, count)
+-
+ extern void __iomem *__ioremap(unsigned long offset, size_t size,
+ unsigned long flags);
+ extern void __iounmap(void __iomem *addr);
+@@ -292,6 +314,4 @@ extern void __iounmap(void __iomem *addr);
+ */
+ #define xlate_dev_kmem_ptr(p) p
+
+-#endif /* __KERNEL__ */
+-
+ #endif /* __ASM_AVR32_IO_H */
+diff --git a/include/asm-avr32/kdebug.h b/include/asm-avr32/kdebug.h
+index f583b64..a8c2f5e 100644
+--- a/include/asm-avr32/kdebug.h
++++ b/include/asm-avr32/kdebug.h
+@@ -12,16 +12,12 @@ struct die_args {
+
+ int register_die_notifier(struct notifier_block *nb);
+ int unregister_die_notifier(struct notifier_block *nb);
+-int register_page_fault_notifier(struct notifier_block *nb);
+-int unregister_page_fault_notifier(struct notifier_block *nb);
+ extern struct atomic_notifier_head avr32_die_chain;
+
+ /* Grossly misnamed. */
+ enum die_val {
+- DIE_FAULT,
+ DIE_BREAKPOINT,
+ DIE_SSTEP,
+- DIE_PAGE_FAULT,
+ };
+
+ static inline int notify_die(enum die_val val, struct pt_regs *regs,
+@@ -35,4 +31,18 @@ static inline int notify_die(enum die_val val, struct pt_regs *regs,
+ return atomic_notifier_call_chain(&avr32_die_chain, val, &args);
+ }
+
++/*
++ * These are only here because kprobes.c wants them to implement a
++ * blatant layering violation. Will hopefully go away soon once all
++ * architectures are updated.
++ */
++static inline int register_page_fault_notifier(struct notifier_block *nb)
++{
++ return 0;
++}
++static inline int unregister_page_fault_notifier(struct notifier_block *nb)
++{
++ return 0;
++}
++
+ #endif /* __ASM_AVR32_KDEBUG_H */
+diff --git a/include/asm-avr32/kprobes.h b/include/asm-avr32/kprobes.h
+index 09a5cbe..190a637 100644
+--- a/include/asm-avr32/kprobes.h
++++ b/include/asm-avr32/kprobes.h
+@@ -26,6 +26,7 @@ struct arch_specific_insn {
+ kprobe_opcode_t insn[MAX_INSN_SIZE];
+ };
+
++extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+ extern int kprobe_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data);
+
+diff --git a/include/asm-avr32/pgtable.h b/include/asm-avr32/pgtable.h
+index 6b8ca9d..f6cc2b0 100644
+--- a/include/asm-avr32/pgtable.h
++++ b/include/asm-avr32/pgtable.h
+@@ -394,10 +394,6 @@ typedef pte_t *pte_addr_t;
+ #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+-#define MK_IOSPACE_PFN(space, pfn) (pfn)
+-#define GET_IOSPACE(pfn) 0
+-#define GET_PFN(pfn) (pfn)
+-
+ /* No page table caches to initialize (?) */
+ #define pgtable_cache_init() do { } while(0)
+
+diff --git a/include/asm-avr32/processor.h b/include/asm-avr32/processor.h
+index f691377..6a64833 100644
+--- a/include/asm-avr32/processor.h
++++ b/include/asm-avr32/processor.h
+@@ -40,6 +40,14 @@ enum tlb_config {
+ TLB_INVALID
+ };
+
++#define AVR32_FEATURE_RMW (1 << 0)
++#define AVR32_FEATURE_DSP (1 << 1)
++#define AVR32_FEATURE_SIMD (1 << 2)
++#define AVR32_FEATURE_OCD (1 << 3)
++#define AVR32_FEATURE_PCTR (1 << 4)
++#define AVR32_FEATURE_JAVA (1 << 5)
++#define AVR32_FEATURE_FPU (1 << 6)
++
+ struct avr32_cpuinfo {
+ struct clk *clk;
+ unsigned long loops_per_jiffy;
+@@ -48,6 +56,7 @@ struct avr32_cpuinfo {
+ unsigned short arch_revision;
+ unsigned short cpu_revision;
+ enum tlb_config tlb_config;
++ unsigned long features;
+
+ struct cache_info icache;
+ struct cache_info dcache;
+@@ -125,10 +134,10 @@ extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+ #define thread_saved_pc(tsk) ((tsk)->thread.cpu_context.pc)
+
+ struct pt_regs;
+-void show_trace(struct task_struct *task, unsigned long *stack,
+- struct pt_regs *regs);
+-
+ extern unsigned long get_wchan(struct task_struct *p);
++extern void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl);
++extern void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp,
++ struct pt_regs *regs, const char *log_lvl);
+
+ #define KSTK_EIP(tsk) ((tsk)->thread.cpu_context.pc)
+ #define KSTK_ESP(tsk) ((tsk)->thread.cpu_context.ksp)
+diff --git a/include/asm-avr32/scatterlist.h b/include/asm-avr32/scatterlist.h
+index bfe7d75..c6d5ce3 100644
+--- a/include/asm-avr32/scatterlist.h
++++ b/include/asm-avr32/scatterlist.h
+@@ -1,6 +1,8 @@
+ #ifndef __ASM_AVR32_SCATTERLIST_H
+ #define __ASM_AVR32_SCATTERLIST_H
+
++#include <asm/types.h>
++
+ struct scatterlist {
+ struct page *page;
+ unsigned int offset;
+diff --git a/include/asm-avr32/setup.h b/include/asm-avr32/setup.h
+index 0a52242..b0828d4 100644
+--- a/include/asm-avr32/setup.h
++++ b/include/asm-avr32/setup.h
+@@ -110,7 +110,7 @@ struct tagtable {
+ int (*parse)(struct tag *);
+ };
+
+-#define __tag __attribute_used__ __attribute__((__section__(".taglist")))
++#define __tag __attribute_used__ __attribute__((__section__(".taglist.init")))
+ #define __tagtable(tag, fn) \
+ static struct tagtable __tagtable_##fn __tag = { tag, fn }
+
+@@ -124,19 +124,12 @@ struct tagtable {
+ #define for_each_tag(t,base) \
+ for (t = base; t->hdr.size; t = tag_next(t))
+
+-extern struct tag_mem_range *mem_phys;
+-extern struct tag_mem_range *mem_reserved;
+-extern struct tag_mem_range *mem_ramdisk;
+-
+ extern struct tag *bootloader_tags;
+
+-extern void setup_bootmem(void);
+-extern void setup_processor(void);
+-extern void board_setup_fbmem(unsigned long fbmem_start,
+- unsigned long fbmem_size);
++extern resource_size_t fbmem_start;
++extern resource_size_t fbmem_size;
+
+-/* Chip-specific hook to enable the use of SDRAM */
+-void chip_enable_sdram(void);
++void setup_processor(void);
+
+ #endif /* !__ASSEMBLY__ */
+
+diff --git a/include/asm-avr32/sysreg.h b/include/asm-avr32/sysreg.h
+index f91975f..c02bc83 100644
+--- a/include/asm-avr32/sysreg.h
++++ b/include/asm-avr32/sysreg.h
+@@ -7,326 +7,281 @@
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+-#ifndef __ASM_AVR32_SYSREG_H__
+-#define __ASM_AVR32_SYSREG_H__
++#ifndef __ASM_AVR32_SYSREG_H
++#define __ASM_AVR32_SYSREG_H
+
+ /* sysreg register offsets */
+-#define SYSREG_SR 0x0000
+-#define SYSREG_EVBA 0x0004
+-#define SYSREG_ACBA 0x0008
+-#define SYSREG_CPUCR 0x000c
+-#define SYSREG_ECR 0x0010
+-#define SYSREG_RSR_SUP 0x0014
+-#define SYSREG_RSR_INT0 0x0018
+-#define SYSREG_RSR_INT1 0x001c
+-#define SYSREG_RSR_INT2 0x0020
+-#define SYSREG_RSR_INT3 0x0024
+-#define SYSREG_RSR_EX 0x0028
+-#define SYSREG_RSR_NMI 0x002c
+-#define SYSREG_RSR_DBG 0x0030
+-#define SYSREG_RAR_SUP 0x0034
+-#define SYSREG_RAR_INT0 0x0038
+-#define SYSREG_RAR_INT1 0x003c
+-#define SYSREG_RAR_INT2 0x0040
+-#define SYSREG_RAR_INT3 0x0044
+-#define SYSREG_RAR_EX 0x0048
+-#define SYSREG_RAR_NMI 0x004c
+-#define SYSREG_RAR_DBG 0x0050
+-#define SYSREG_JECR 0x0054
+-#define SYSREG_JOSP 0x0058
+-#define SYSREG_JAVA_LV0 0x005c
+-#define SYSREG_JAVA_LV1 0x0060
+-#define SYSREG_JAVA_LV2 0x0064
+-#define SYSREG_JAVA_LV3 0x0068
+-#define SYSREG_JAVA_LV4 0x006c
+-#define SYSREG_JAVA_LV5 0x0070
+-#define SYSREG_JAVA_LV6 0x0074
+-#define SYSREG_JAVA_LV7 0x0078
+-#define SYSREG_JTBA 0x007c
+-#define SYSREG_JBCR 0x0080
+-#define SYSREG_CONFIG0 0x0100
+-#define SYSREG_CONFIG1 0x0104
+-#define SYSREG_COUNT 0x0108
+-#define SYSREG_COMPARE 0x010c
+-#define SYSREG_TLBEHI 0x0110
+-#define SYSREG_TLBELO 0x0114
+-#define SYSREG_PTBR 0x0118
+-#define SYSREG_TLBEAR 0x011c
+-#define SYSREG_MMUCR 0x0120
+-#define SYSREG_TLBARLO 0x0124
+-#define SYSREG_TLBARHI 0x0128
+-#define SYSREG_PCCNT 0x012c
+-#define SYSREG_PCNT0 0x0130
+-#define SYSREG_PCNT1 0x0134
+-#define SYSREG_PCCR 0x0138
+-#define SYSREG_BEAR 0x013c
++#define SYSREG_SR 0x0000
++#define SYSREG_EVBA 0x0004
++#define SYSREG_ACBA 0x0008
++#define SYSREG_CPUCR 0x000c
++#define SYSREG_ECR 0x0010
++#define SYSREG_RSR_SUP 0x0014
++#define SYSREG_RSR_INT0 0x0018
++#define SYSREG_RSR_INT1 0x001c
++#define SYSREG_RSR_INT2 0x0020
++#define SYSREG_RSR_INT3 0x0024
++#define SYSREG_RSR_EX 0x0028
++#define SYSREG_RSR_NMI 0x002c
++#define SYSREG_RSR_DBG 0x0030
++#define SYSREG_RAR_SUP 0x0034
++#define SYSREG_RAR_INT0 0x0038
++#define SYSREG_RAR_INT1 0x003c
++#define SYSREG_RAR_INT2 0x0040
++#define SYSREG_RAR_INT3 0x0044
++#define SYSREG_RAR_EX 0x0048
++#define SYSREG_RAR_NMI 0x004c
++#define SYSREG_RAR_DBG 0x0050
++#define SYSREG_JECR 0x0054
++#define SYSREG_JOSP 0x0058
++#define SYSREG_JAVA_LV0 0x005c
++#define SYSREG_JAVA_LV1 0x0060
++#define SYSREG_JAVA_LV2 0x0064
++#define SYSREG_JAVA_LV3 0x0068
++#define SYSREG_JAVA_LV4 0x006c
++#define SYSREG_JAVA_LV5 0x0070
++#define SYSREG_JAVA_LV6 0x0074
++#define SYSREG_JAVA_LV7 0x0078
++#define SYSREG_JTBA 0x007c
++#define SYSREG_JBCR 0x0080
++#define SYSREG_CONFIG0 0x0100
++#define SYSREG_CONFIG1 0x0104
++#define SYSREG_COUNT 0x0108
++#define SYSREG_COMPARE 0x010c
++#define SYSREG_TLBEHI 0x0110
++#define SYSREG_TLBELO 0x0114
++#define SYSREG_PTBR 0x0118
++#define SYSREG_TLBEAR 0x011c
++#define SYSREG_MMUCR 0x0120
++#define SYSREG_TLBARLO 0x0124
++#define SYSREG_TLBARHI 0x0128
++#define SYSREG_PCCNT 0x012c
++#define SYSREG_PCNT0 0x0130
++#define SYSREG_PCNT1 0x0134
++#define SYSREG_PCCR 0x0138
++#define SYSREG_BEAR 0x013c
++#define SYSREG_SABAL 0x0300
++#define SYSREG_SABAH 0x0304
++#define SYSREG_SABD 0x0308
+
+ /* Bitfields in SR */
+-#define SYSREG_SR_C_OFFSET 0
+-#define SYSREG_SR_C_SIZE 1
+-#define SYSREG_Z_OFFSET 1
+-#define SYSREG_Z_SIZE 1
+-#define SYSREG_SR_N_OFFSET 2
+-#define SYSREG_SR_N_SIZE 1
+-#define SYSREG_SR_V_OFFSET 3
+-#define SYSREG_SR_V_SIZE 1
+-#define SYSREG_Q_OFFSET 4
+-#define SYSREG_Q_SIZE 1
+-#define SYSREG_GM_OFFSET 16
+-#define SYSREG_GM_SIZE 1
+-#define SYSREG_I0M_OFFSET 17
+-#define SYSREG_I0M_SIZE 1
+-#define SYSREG_I1M_OFFSET 18
+-#define SYSREG_I1M_SIZE 1
+-#define SYSREG_I2M_OFFSET 19
+-#define SYSREG_I2M_SIZE 1
+-#define SYSREG_I3M_OFFSET 20
+-#define SYSREG_I3M_SIZE 1
+-#define SYSREG_EM_OFFSET 21
+-#define SYSREG_EM_SIZE 1
+-#define SYSREG_M0_OFFSET 22
+-#define SYSREG_M0_SIZE 1
+-#define SYSREG_M1_OFFSET 23
+-#define SYSREG_M1_SIZE 1
+-#define SYSREG_M2_OFFSET 24
+-#define SYSREG_M2_SIZE 1
+-#define SYSREG_SR_D_OFFSET 26
+-#define SYSREG_SR_D_SIZE 1
+-#define SYSREG_DM_OFFSET 27
+-#define SYSREG_DM_SIZE 1
+-#define SYSREG_SR_J_OFFSET 28
+-#define SYSREG_SR_J_SIZE 1
+-#define SYSREG_R_OFFSET 29
+-#define SYSREG_R_SIZE 1
+-#define SYSREG_H_OFFSET 30
+-#define SYSREG_H_SIZE 1
+-
+-/* Bitfields in EVBA */
+-
+-/* Bitfields in ACBA */
++#define SYSREG_SR_C_OFFSET 0
++#define SYSREG_SR_C_SIZE 1
++#define SYSREG_Z_OFFSET 1
++#define SYSREG_Z_SIZE 1
++#define SYSREG_SR_N_OFFSET 2
++#define SYSREG_SR_N_SIZE 1
++#define SYSREG_SR_V_OFFSET 3
++#define SYSREG_SR_V_SIZE 1
++#define SYSREG_Q_OFFSET 4
++#define SYSREG_Q_SIZE 1
++#define SYSREG_L_OFFSET 5
++#define SYSREG_L_SIZE 1
++#define SYSREG_T_OFFSET 14
++#define SYSREG_T_SIZE 1
++#define SYSREG_SR_R_OFFSET 15
++#define SYSREG_SR_R_SIZE 1
++#define SYSREG_GM_OFFSET 16
++#define SYSREG_GM_SIZE 1
++#define SYSREG_I0M_OFFSET 17
++#define SYSREG_I0M_SIZE 1
++#define SYSREG_I1M_OFFSET 18
++#define SYSREG_I1M_SIZE 1
++#define SYSREG_I2M_OFFSET 19
++#define SYSREG_I2M_SIZE 1
++#define SYSREG_I3M_OFFSET 20
++#define SYSREG_I3M_SIZE 1
++#define SYSREG_EM_OFFSET 21
++#define SYSREG_EM_SIZE 1
++#define SYSREG_M0_OFFSET 22
++#define SYSREG_M0_SIZE 1
++#define SYSREG_M1_OFFSET 23
++#define SYSREG_M1_SIZE 1
++#define SYSREG_M2_OFFSET 24
++#define SYSREG_M2_SIZE 1
++#define SYSREG_SR_D_OFFSET 26
++#define SYSREG_SR_D_SIZE 1
++#define SYSREG_DM_OFFSET 27
++#define SYSREG_DM_SIZE 1
++#define SYSREG_SR_J_OFFSET 28
++#define SYSREG_SR_J_SIZE 1
++#define SYSREG_H_OFFSET 29
++#define SYSREG_H_SIZE 1
+
+ /* Bitfields in CPUCR */
+-#define SYSREG_BI_OFFSET 0
+-#define SYSREG_BI_SIZE 1
+-#define SYSREG_BE_OFFSET 1
+-#define SYSREG_BE_SIZE 1
+-#define SYSREG_FE_OFFSET 2
+-#define SYSREG_FE_SIZE 1
+-#define SYSREG_RE_OFFSET 3
+-#define SYSREG_RE_SIZE 1
+-#define SYSREG_IBE_OFFSET 4
+-#define SYSREG_IBE_SIZE 1
+-#define SYSREG_IEE_OFFSET 5
+-#define SYSREG_IEE_SIZE 1
+-
+-/* Bitfields in ECR */
+-#define SYSREG_ECR_OFFSET 0
+-#define SYSREG_ECR_SIZE 32
+-
+-/* Bitfields in RSR_SUP */
+-
+-/* Bitfields in RSR_INT0 */
+-
+-/* Bitfields in RSR_INT1 */
+-
+-/* Bitfields in RSR_INT2 */
+-
+-/* Bitfields in RSR_INT3 */
+-
+-/* Bitfields in RSR_EX */
+-
+-/* Bitfields in RSR_NMI */
+-
+-/* Bitfields in RSR_DBG */
+-
+-/* Bitfields in RAR_SUP */
+-
+-/* Bitfields in RAR_INT0 */
+-
+-/* Bitfields in RAR_INT1 */
+-
+-/* Bitfields in RAR_INT2 */
+-
+-/* Bitfields in RAR_INT3 */
+-
+-/* Bitfields in RAR_EX */
+-
+-/* Bitfields in RAR_NMI */
+-
+-/* Bitfields in RAR_DBG */
+-
+-/* Bitfields in JECR */
+-
+-/* Bitfields in JOSP */
+-
+-/* Bitfields in JAVA_LV0 */
+-
+-/* Bitfields in JAVA_LV1 */
+-
+-/* Bitfields in JAVA_LV2 */
+-
+-/* Bitfields in JAVA_LV3 */
+-
+-/* Bitfields in JAVA_LV4 */
+-
+-/* Bitfields in JAVA_LV5 */
+-
+-/* Bitfields in JAVA_LV6 */
+-
+-/* Bitfields in JAVA_LV7 */
+-
+-/* Bitfields in JTBA */
+-
+-/* Bitfields in JBCR */
++#define SYSREG_BI_OFFSET 0
++#define SYSREG_BI_SIZE 1
++#define SYSREG_BE_OFFSET 1
++#define SYSREG_BE_SIZE 1
++#define SYSREG_FE_OFFSET 2
++#define SYSREG_FE_SIZE 1
++#define SYSREG_RE_OFFSET 3
++#define SYSREG_RE_SIZE 1
++#define SYSREG_IBE_OFFSET 4
++#define SYSREG_IBE_SIZE 1
++#define SYSREG_IEE_OFFSET 5
++#define SYSREG_IEE_SIZE 1
+
+ /* Bitfields in CONFIG0 */
+-#define SYSREG_CONFIG0_D_OFFSET 1
+-#define SYSREG_CONFIG0_D_SIZE 1
+-#define SYSREG_CONFIG0_S_OFFSET 2
+-#define SYSREG_CONFIG0_S_SIZE 1
+-#define SYSREG_O_OFFSET 3
+-#define SYSREG_O_SIZE 1
+-#define SYSREG_P_OFFSET 4
+-#define SYSREG_P_SIZE 1
+-#define SYSREG_CONFIG0_J_OFFSET 5
+-#define SYSREG_CONFIG0_J_SIZE 1
+-#define SYSREG_F_OFFSET 6
+-#define SYSREG_F_SIZE 1
+-#define SYSREG_MMUT_OFFSET 7
+-#define SYSREG_MMUT_SIZE 3
+-#define SYSREG_AR_OFFSET 10
+-#define SYSREG_AR_SIZE 3
+-#define SYSREG_AT_OFFSET 13
+-#define SYSREG_AT_SIZE 3
+-#define SYSREG_PROCESSORREVISION_OFFSET 16
+-#define SYSREG_PROCESSORREVISION_SIZE 8
+-#define SYSREG_PROCESSORID_OFFSET 24
+-#define SYSREG_PROCESSORID_SIZE 8
++#define SYSREG_CONFIG0_R_OFFSET 0
++#define SYSREG_CONFIG0_R_SIZE 1
++#define SYSREG_CONFIG0_D_OFFSET 1
++#define SYSREG_CONFIG0_D_SIZE 1
++#define SYSREG_CONFIG0_S_OFFSET 2
++#define SYSREG_CONFIG0_S_SIZE 1
++#define SYSREG_CONFIG0_O_OFFSET 3
++#define SYSREG_CONFIG0_O_SIZE 1
++#define SYSREG_CONFIG0_P_OFFSET 4
++#define SYSREG_CONFIG0_P_SIZE 1
++#define SYSREG_CONFIG0_J_OFFSET 5
++#define SYSREG_CONFIG0_J_SIZE 1
++#define SYSREG_CONFIG0_F_OFFSET 6
++#define SYSREG_CONFIG0_F_SIZE 1
++#define SYSREG_MMUT_OFFSET 7
++#define SYSREG_MMUT_SIZE 3
++#define SYSREG_AR_OFFSET 10
++#define SYSREG_AR_SIZE 3
++#define SYSREG_AT_OFFSET 13
++#define SYSREG_AT_SIZE 3
++#define SYSREG_PROCESSORREVISION_OFFSET 16
++#define SYSREG_PROCESSORREVISION_SIZE 8
++#define SYSREG_PROCESSORID_OFFSET 24
++#define SYSREG_PROCESSORID_SIZE 8
+
+ /* Bitfields in CONFIG1 */
+-#define SYSREG_DASS_OFFSET 0
+-#define SYSREG_DASS_SIZE 3
+-#define SYSREG_DLSZ_OFFSET 3
+-#define SYSREG_DLSZ_SIZE 3
+-#define SYSREG_DSET_OFFSET 6
+-#define SYSREG_DSET_SIZE 4
+-#define SYSREG_IASS_OFFSET 10
+-#define SYSREG_IASS_SIZE 2
+-#define SYSREG_ILSZ_OFFSET 13
+-#define SYSREG_ILSZ_SIZE 3
+-#define SYSREG_ISET_OFFSET 16
+-#define SYSREG_ISET_SIZE 4
+-#define SYSREG_DMMUSZ_OFFSET 20
+-#define SYSREG_DMMUSZ_SIZE 6
+-#define SYSREG_IMMUSZ_OFFSET 26
+-#define SYSREG_IMMUSZ_SIZE 6
+-
+-/* Bitfields in COUNT */
+-
+-/* Bitfields in COMPARE */
++#define SYSREG_DASS_OFFSET 0
++#define SYSREG_DASS_SIZE 3
++#define SYSREG_DLSZ_OFFSET 3
++#define SYSREG_DLSZ_SIZE 3
++#define SYSREG_DSET_OFFSET 6
++#define SYSREG_DSET_SIZE 4
++#define SYSREG_IASS_OFFSET 10
++#define SYSREG_IASS_SIZE 3
++#define SYSREG_ILSZ_OFFSET 13
++#define SYSREG_ILSZ_SIZE 3
++#define SYSREG_ISET_OFFSET 16
++#define SYSREG_ISET_SIZE 4
++#define SYSREG_DMMUSZ_OFFSET 20
++#define SYSREG_DMMUSZ_SIZE 6
++#define SYSREG_IMMUSZ_OFFSET 26
++#define SYSREG_IMMUSZ_SIZE 6
+
+ /* Bitfields in TLBEHI */
+-#define SYSREG_ASID_OFFSET 0
+-#define SYSREG_ASID_SIZE 8
+-#define SYSREG_TLBEHI_I_OFFSET 8
+-#define SYSREG_TLBEHI_I_SIZE 1
+-#define SYSREG_TLBEHI_V_OFFSET 9
+-#define SYSREG_TLBEHI_V_SIZE 1
+-#define SYSREG_VPN_OFFSET 10
+-#define SYSREG_VPN_SIZE 22
++#define SYSREG_ASID_OFFSET 0
++#define SYSREG_ASID_SIZE 8
++#define SYSREG_TLBEHI_I_OFFSET 8
++#define SYSREG_TLBEHI_I_SIZE 1
++#define SYSREG_TLBEHI_V_OFFSET 9
++#define SYSREG_TLBEHI_V_SIZE 1
++#define SYSREG_VPN_OFFSET 10
++#define SYSREG_VPN_SIZE 22
+
+ /* Bitfields in TLBELO */
+-#define SYSREG_W_OFFSET 0
+-#define SYSREG_W_SIZE 1
+-#define SYSREG_TLBELO_D_OFFSET 1
+-#define SYSREG_TLBELO_D_SIZE 1
+-#define SYSREG_SZ_OFFSET 2
+-#define SYSREG_SZ_SIZE 2
+-#define SYSREG_AP_OFFSET 4
+-#define SYSREG_AP_SIZE 3
+-#define SYSREG_B_OFFSET 7
+-#define SYSREG_B_SIZE 1
+-#define SYSREG_G_OFFSET 8
+-#define SYSREG_G_SIZE 1
+-#define SYSREG_TLBELO_C_OFFSET 9
+-#define SYSREG_TLBELO_C_SIZE 1
+-#define SYSREG_PFN_OFFSET 10
+-#define SYSREG_PFN_SIZE 22
+-
+-/* Bitfields in PTBR */
+-
+-/* Bitfields in TLBEAR */
++#define SYSREG_W_OFFSET 0
++#define SYSREG_W_SIZE 1
++#define SYSREG_TLBELO_D_OFFSET 1
++#define SYSREG_TLBELO_D_SIZE 1
++#define SYSREG_SZ_OFFSET 2
++#define SYSREG_SZ_SIZE 2
++#define SYSREG_AP_OFFSET 4
++#define SYSREG_AP_SIZE 3
++#define SYSREG_B_OFFSET 7
++#define SYSREG_B_SIZE 1
++#define SYSREG_G_OFFSET 8
++#define SYSREG_G_SIZE 1
++#define SYSREG_TLBELO_C_OFFSET 9
++#define SYSREG_TLBELO_C_SIZE 1
++#define SYSREG_PFN_OFFSET 10
++#define SYSREG_PFN_SIZE 22
+
+ /* Bitfields in MMUCR */
+-#define SYSREG_E_OFFSET 0
+-#define SYSREG_E_SIZE 1
+-#define SYSREG_M_OFFSET 1
+-#define SYSREG_M_SIZE 1
+-#define SYSREG_MMUCR_I_OFFSET 2
+-#define SYSREG_MMUCR_I_SIZE 1
+-#define SYSREG_MMUCR_N_OFFSET 3
+-#define SYSREG_MMUCR_N_SIZE 1
+-#define SYSREG_MMUCR_S_OFFSET 4
+-#define SYSREG_MMUCR_S_SIZE 1
+-#define SYSREG_DLA_OFFSET 8
+-#define SYSREG_DLA_SIZE 6
+-#define SYSREG_DRP_OFFSET 14
+-#define SYSREG_DRP_SIZE 6
+-#define SYSREG_ILA_OFFSET 20
+-#define SYSREG_ILA_SIZE 6
+-#define SYSREG_IRP_OFFSET 26
+-#define SYSREG_IRP_SIZE 6
+-
+-/* Bitfields in TLBARLO */
+-
+-/* Bitfields in TLBARHI */
+-
+-/* Bitfields in PCCNT */
+-
+-/* Bitfields in PCNT0 */
+-
+-/* Bitfields in PCNT1 */
++#define SYSREG_E_OFFSET 0
++#define SYSREG_E_SIZE 1
++#define SYSREG_M_OFFSET 1
++#define SYSREG_M_SIZE 1
++#define SYSREG_MMUCR_I_OFFSET 2
++#define SYSREG_MMUCR_I_SIZE 1
++#define SYSREG_MMUCR_N_OFFSET 3
++#define SYSREG_MMUCR_N_SIZE 1
++#define SYSREG_MMUCR_S_OFFSET 4
++#define SYSREG_MMUCR_S_SIZE 1
++#define SYSREG_DLA_OFFSET 8
++#define SYSREG_DLA_SIZE 6
++#define SYSREG_DRP_OFFSET 14
++#define SYSREG_DRP_SIZE 6
++#define SYSREG_ILA_OFFSET 20
++#define SYSREG_ILA_SIZE 6
++#define SYSREG_IRP_OFFSET 26
++#define SYSREG_IRP_SIZE 6
+
+ /* Bitfields in PCCR */
+-
+-/* Bitfields in BEAR */
++#define SYSREG_PCCR_R_OFFSET 1
++#define SYSREG_PCCR_R_SIZE 1
++#define SYSREG_PCCR_C_OFFSET 2
++#define SYSREG_PCCR_C_SIZE 1
++#define SYSREG_PCCR_S_OFFSET 3
++#define SYSREG_PCCR_S_SIZE 1
++#define SYSREG_IEC_OFFSET 4
++#define SYSREG_IEC_SIZE 1
++#define SYSREG_IE0_OFFSET 5
++#define SYSREG_IE0_SIZE 1
++#define SYSREG_IE1_OFFSET 6
++#define SYSREG_IE1_SIZE 1
++#define SYSREG_FC_OFFSET 8
++#define SYSREG_FC_SIZE 1
++#define SYSREG_F0_OFFSET 9
++#define SYSREG_F0_SIZE 1
++#define SYSREG_F1_OFFSET 10
++#define SYSREG_F1_SIZE 1
++#define SYSREG_CONF0_OFFSET 12
++#define SYSREG_CONF0_SIZE 6
++#define SYSREG_CONF1_OFFSET 18
++#define SYSREG_CONF1_SIZE 6
+
+ /* Constants for ECR */
+-#define ECR_UNRECOVERABLE 0
+-#define ECR_TLB_MULTIPLE 1
+-#define ECR_BUS_ERROR_WRITE 2
+-#define ECR_BUS_ERROR_READ 3
+-#define ECR_NMI 4
+-#define ECR_ADDR_ALIGN_X 5
+-#define ECR_PROTECTION_X 6
+-#define ECR_DEBUG 7
+-#define ECR_ILLEGAL_OPCODE 8
+-#define ECR_UNIMPL_INSTRUCTION 9
+-#define ECR_PRIVILEGE_VIOLATION 10
+-#define ECR_FPE 11
+-#define ECR_COPROC_ABSENT 12
+-#define ECR_ADDR_ALIGN_R 13
+-#define ECR_ADDR_ALIGN_W 14
+-#define ECR_PROTECTION_R 15
+-#define ECR_PROTECTION_W 16
+-#define ECR_DTLB_MODIFIED 17
+-#define ECR_TLB_MISS_X 20
+-#define ECR_TLB_MISS_R 24
+-#define ECR_TLB_MISS_W 28
++#define ECR_UNRECOVERABLE 0
++#define ECR_TLB_MULTIPLE 1
++#define ECR_BUS_ERROR_WRITE 2
++#define ECR_BUS_ERROR_READ 3
++#define ECR_NMI 4
++#define ECR_ADDR_ALIGN_X 5
++#define ECR_PROTECTION_X 6
++#define ECR_DEBUG 7
++#define ECR_ILLEGAL_OPCODE 8
++#define ECR_UNIMPL_INSTRUCTION 9
++#define ECR_PRIVILEGE_VIOLATION 10
++#define ECR_FPE 11
++#define ECR_COPROC_ABSENT 12
++#define ECR_ADDR_ALIGN_R 13
++#define ECR_ADDR_ALIGN_W 14
++#define ECR_PROTECTION_R 15
++#define ECR_PROTECTION_W 16
++#define ECR_DTLB_MODIFIED 17
++#define ECR_TLB_MISS_X 20
++#define ECR_TLB_MISS_R 24
++#define ECR_TLB_MISS_W 28
+
+ /* Bit manipulation macros */
+-#define SYSREG_BIT(name) (1 << SYSREG_##name##_OFFSET)
+-#define SYSREG_BF(name,value) (((value) & ((1 << SYSREG_##name##_SIZE) - 1)) << SYSREG_##name##_OFFSET)
+-#define SYSREG_BFEXT(name,value) (((value) >> SYSREG_##name##_OFFSET) & ((1 << SYSREG_##name##_SIZE) - 1))
+-#define SYSREG_BFINS(name,value,old) (((old) & ~(((1 << SYSREG_##name##_SIZE) - 1) << SYSREG_##name##_OFFSET)) | SYSREG_BF(name,value))
++#define SYSREG_BIT(name) \
++ (1 << SYSREG_##name##_OFFSET)
++#define SYSREG_BF(name,value) \
++ (((value) & ((1 << SYSREG_##name##_SIZE) - 1)) \
++ << SYSREG_##name##_OFFSET)
++#define SYSREG_BFEXT(name,value)\
++ (((value) >> SYSREG_##name##_OFFSET) \
++ & ((1 << SYSREG_##name##_SIZE) - 1))
++#define SYSREG_BFINS(name,value,old) \
++ (((old) & ~(((1 << SYSREG_##name##_SIZE) - 1) \
++ << SYSREG_##name##_OFFSET)) \
++ | SYSREG_BF(name,value))
+
++/* Register access macros */
+ #ifdef __CHECKER__
+ extern unsigned long __builtin_mfsr(unsigned long reg);
+ extern void __builtin_mtsr(unsigned long reg, unsigned long value);
+ #endif
+
+-/* Register access macros */
+-#define sysreg_read(reg) __builtin_mfsr(SYSREG_##reg)
+-#define sysreg_write(reg, value) __builtin_mtsr(SYSREG_##reg, value)
++#define sysreg_read(reg) __builtin_mfsr(SYSREG_##reg)
++#define sysreg_write(reg, value) __builtin_mtsr(SYSREG_##reg, value)
+
+-#endif /* __ASM_AVR32_SYSREG_H__ */
++#endif /* __ASM_AVR32_SYSREG_H */
+diff --git a/include/asm-avr32/system.h b/include/asm-avr32/system.h
+index ac59605..a8236ba 100644
+--- a/include/asm-avr32/system.h
++++ b/include/asm-avr32/system.h
+@@ -9,6 +9,7 @@
+ #define __ASM_AVR32_SYSTEM_H
+
+ #include <linux/compiler.h>
++#include <linux/linkage.h>
+ #include <linux/types.h>
+
+ #include <asm/ptrace.h>
+@@ -140,15 +141,9 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+ sizeof(*(ptr))))
+
+ struct pt_regs;
+-extern void __die(const char *, struct pt_regs *, unsigned long,
+- const char *, const char *, unsigned long);
+-extern void __die_if_kernel(const char *, struct pt_regs *, unsigned long,
+- const char *, const char *, unsigned long);
+-
+-#define die(msg, regs, err) \
+- __die(msg, regs, err, __FILE__ ":", __FUNCTION__, __LINE__)
+-#define die_if_kernel(msg, regs, err) \
+- __die_if_kernel(msg, regs, err, __FILE__ ":", __FUNCTION__, __LINE__)
++void NORET_TYPE die(const char *str, struct pt_regs *regs, long err);
++void _exception(long signr, struct pt_regs *regs, int code,
++ unsigned long addr);
+
+ #define arch_align_stack(x) (x)
+
+diff --git a/include/asm-avr32/thread_info.h b/include/asm-avr32/thread_info.h
+index d1f5b35..a2e606d 100644
+--- a/include/asm-avr32/thread_info.h
++++ b/include/asm-avr32/thread_info.h
+@@ -83,6 +83,7 @@ static inline struct thread_info *current_thread_info(void)
+ #define TIF_SINGLE_STEP 6 /* single step after next break */
+ #define TIF_MEMDIE 7
+ #define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal */
++#define TIF_CPU_GOING_TO_SLEEP 9 /* CPU is entering sleep 0 mode */
+ #define TIF_USERSPACE 31 /* true if FS sets userspace */
+
+ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
+@@ -94,6 +95,7 @@ static inline struct thread_info *current_thread_info(void)
+ #define _TIF_SINGLE_STEP (1 << TIF_SINGLE_STEP)
+ #define _TIF_MEMDIE (1 << TIF_MEMDIE)
+ #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
++#define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP)
+
+ /* XXX: These two masks must never span more than 16 bits! */
+ /* work to do on interrupt/exception return */
+diff --git a/include/asm-avr32/uaccess.h b/include/asm-avr32/uaccess.h
+index 74a679e..ed09239 100644
+--- a/include/asm-avr32/uaccess.h
++++ b/include/asm-avr32/uaccess.h
+@@ -181,24 +181,23 @@ extern int __put_user_bad(void);
+
+ #define __get_user_nocheck(x, ptr, size) \
+ ({ \
+- typeof(*(ptr)) __gu_val = (typeof(*(ptr)) __force)0; \
++ unsigned long __gu_val = 0; \
+ int __gu_err = 0; \
+ \
+ switch (size) { \
+ case 1: __get_user_asm("ub", __gu_val, ptr, __gu_err); break; \
+ case 2: __get_user_asm("uh", __gu_val, ptr, __gu_err); break; \
+ case 4: __get_user_asm("w", __gu_val, ptr, __gu_err); break; \
+- case 8: __get_user_asm("d", __gu_val, ptr, __gu_err); break; \
+ default: __gu_err = __get_user_bad(); break; \
+ } \
+ \
+- x = __gu_val; \
++ x = (typeof(*(ptr)))__gu_val; \
+ __gu_err; \
+ })
+
+ #define __get_user_check(x, ptr, size) \
+ ({ \
+- typeof(*(ptr)) __gu_val = (typeof(*(ptr)) __force)0; \
++ unsigned long __gu_val = 0; \
+ const typeof(*(ptr)) __user * __gu_addr = (ptr); \
+ int __gu_err = 0; \
+ \
+@@ -216,10 +215,6 @@ extern int __put_user_bad(void);
+ __get_user_asm("w", __gu_val, __gu_addr, \
+ __gu_err); \
+ break; \
+- case 8: \
+- __get_user_asm("d", __gu_val, __gu_addr, \
+- __gu_err); \
+- break; \
+ default: \
+ __gu_err = __get_user_bad(); \
+ break; \
+@@ -227,7 +222,7 @@ extern int __put_user_bad(void);
+ } else { \
+ __gu_err = -EFAULT; \
+ } \
+- x = __gu_val; \
++ x = (typeof(*(ptr)))__gu_val; \
+ __gu_err; \
+ })
+
+diff --git a/include/asm-avr32/unaligned.h b/include/asm-avr32/unaligned.h
+index 3042723..7913617 100644
+--- a/include/asm-avr32/unaligned.h
++++ b/include/asm-avr32/unaligned.h
+@@ -6,20 +6,31 @@
+ * implementation. The AVR32 AP implementation can handle unaligned
+ * words, but halfwords must be halfword-aligned, and doublewords must
+ * be word-aligned.
+- *
+- * TODO: Make all this CPU-specific and optimize.
+ */
+
+-#include <linux/string.h>
++#include <asm-generic/unaligned.h>
+
+-/* Use memmove here, so gcc does not insert a __builtin_memcpy. */
++#ifdef CONFIG_CPU_AT32AP7000
+
++/* REVISIT calling memmove() may be smaller for 64-bit values ... */
++
++#undef get_unaligned
+ #define get_unaligned(ptr) \
+- ({ __typeof__(*(ptr)) __tmp; memmove(&__tmp, (ptr), sizeof(*(ptr))); __tmp; })
++ ___get_unaligned(ptr, sizeof((*ptr)))
++#define ___get_unaligned(ptr, size) \
++ ((size == 4) ? *(ptr) : __get_unaligned(ptr, size))
++
++#undef put_unaligned
++#define put_unaligned(val, ptr) \
++ ___put_unaligned((__u64)(val), ptr, sizeof((*ptr)))
++#define ___put_unaligned(val, ptr, size) \
++do { \
++ if (size == 4) \
++ *(ptr) = (val); \
++ else \
++ __put_unaligned(val, ptr, size); \
++} while (0)
+
+-#define put_unaligned(val, ptr) \
+- ({ __typeof__(*(ptr)) __tmp = (val); \
+- memmove((ptr), &__tmp, sizeof(*(ptr))); \
+- (void)0; })
++#endif
+
+ #endif /* __ASM_AVR32_UNALIGNED_H */
+diff --git a/include/asm-frv/pgtable.h b/include/asm-frv/pgtable.h
+index 8a05aa1..2687c77 100644
+--- a/include/asm-frv/pgtable.h
++++ b/include/asm-frv/pgtable.h
+@@ -509,10 +509,6 @@ static inline int pte_file(pte_t pte)
+ #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+-#define MK_IOSPACE_PFN(space, pfn) (pfn)
+-#define GET_IOSPACE(pfn) 0
+-#define GET_PFN(pfn) (pfn)
+-
+ #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+ #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+ #define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+diff --git a/include/asm-frv/scatterlist.h b/include/asm-frv/scatterlist.h
+index fb38fd3..8e827fa 100644
+--- a/include/asm-frv/scatterlist.h
++++ b/include/asm-frv/scatterlist.h
+@@ -1,6 +1,8 @@
+ #ifndef _ASM_SCATTERLIST_H
+ #define _ASM_SCATTERLIST_H
+
++#include <asm/types.h>
++
+ /*
+ * Drivers must set either ->address or (preferred) ->page and ->offset
+ * to indicate where data must be transferred to/from.
+diff --git a/include/asm-h8300/pgtable.h b/include/asm-h8300/pgtable.h
+index 8b7c685..170ea02 100644
+--- a/include/asm-h8300/pgtable.h
++++ b/include/asm-h8300/pgtable.h
+@@ -55,10 +55,6 @@ extern int is_in_rom(unsigned long);
+ #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+-#define MK_IOSPACE_PFN(space, pfn) (pfn)
+-#define GET_IOSPACE(pfn) 0
+-#define GET_PFN(pfn) (pfn)
+-
+ /*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+diff --git a/include/asm-h8300/scatterlist.h b/include/asm-h8300/scatterlist.h
+index 7627f0c..985fdf5 100644
+--- a/include/asm-h8300/scatterlist.h
++++ b/include/asm-h8300/scatterlist.h
+@@ -1,6 +1,8 @@
+ #ifndef _H8300_SCATTERLIST_H
+ #define _H8300_SCATTERLIST_H
+
++#include <asm/types.h>
++
+ struct scatterlist {
+ struct page *page;
+ unsigned int offset;
+diff --git a/include/asm-i386/pgtable.h b/include/asm-i386/pgtable.h
+index c3b58d4..994cf30 100644
+--- a/include/asm-i386/pgtable.h
++++ b/include/asm-i386/pgtable.h
+@@ -519,10 +519,6 @@ do { \
+ #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+-#define MK_IOSPACE_PFN(space, pfn) (pfn)
+-#define GET_IOSPACE(pfn) 0
+-#define GET_PFN(pfn) (pfn)
+-
+ #include <asm-generic/pgtable.h>
+
+ #endif /* _I386_PGTABLE_H */
+diff --git a/include/asm-i386/scatterlist.h b/include/asm-i386/scatterlist.h
+index 55d6c95..d7e45a8 100644
+--- a/include/asm-i386/scatterlist.h
++++ b/include/asm-i386/scatterlist.h
+@@ -1,6 +1,8 @@
+ #ifndef _I386_SCATTERLIST_H
+ #define _I386_SCATTERLIST_H
+
++#include <asm/types.h>
++
+ struct scatterlist {
+ struct page *page;
+ unsigned int offset;
+diff --git a/include/asm-ia64/pgtable.h b/include/asm-ia64/pgtable.h
+index 5531827..670b706 100644
+--- a/include/asm-ia64/pgtable.h
++++ b/include/asm-ia64/pgtable.h
+@@ -485,10 +485,6 @@ extern void paging_init (void);
+ #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+-#define MK_IOSPACE_PFN(space, pfn) (pfn)
+-#define GET_IOSPACE(pfn) 0
+-#define GET_PFN(pfn) (pfn)
+-
+ /*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+diff --git a/include/asm-ia64/scatterlist.h b/include/asm-ia64/scatterlist.h
+index 9dbea88..a452ea2 100644
+--- a/include/asm-ia64/scatterlist.h
++++ b/include/asm-ia64/scatterlist.h
+@@ -6,6 +6,8 @@
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
++#include <asm/types.h>
++
+ struct scatterlist {
+ struct page *page;
+ unsigned int offset;
+diff --git a/include/asm-m32r/pgtable.h b/include/asm-m32r/pgtable.h
+index 1c15ba7..8b2a2f1 100644
+--- a/include/asm-m32r/pgtable.h
++++ b/include/asm-m32r/pgtable.h
+@@ -381,10 +381,6 @@ static inline void pmd_set(pmd_t * pmdp, pte_t * ptep)
+ #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+-#define MK_IOSPACE_PFN(space, pfn) (pfn)
+-#define GET_IOSPACE(pfn) 0
+-#define GET_PFN(pfn) (pfn)
+-
+ #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+ #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+ #define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+diff --git a/include/asm-m32r/scatterlist.h b/include/asm-m32r/scatterlist.h
+index c2de96c..352415f 100644
+--- a/include/asm-m32r/scatterlist.h
++++ b/include/asm-m32r/scatterlist.h
+@@ -1,6 +1,8 @@
+ #ifndef _ASM_M32R_SCATTERLIST_H
+ #define _ASM_M32R_SCATTERLIST_H
+
++#include <asm/types.h>
++
+ struct scatterlist {
+ char * address; /* Location data is to be transferred to, NULL for
+ * highmem page */
+diff --git a/include/asm-m68k/pgtable.h b/include/asm-m68k/pgtable.h
+index f3aa053..555b87a 100644
+--- a/include/asm-m68k/pgtable.h
++++ b/include/asm-m68k/pgtable.h
+@@ -143,10 +143,6 @@ static inline void update_mmu_cache(struct vm_area_struct *vma,
+ #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+-#define MK_IOSPACE_PFN(space, pfn) (pfn)
+-#define GET_IOSPACE(pfn) 0
+-#define GET_PFN(pfn) (pfn)
+-
+ /* MMU-specific headers */
+
+ #ifdef CONFIG_SUN3
+diff --git a/include/asm-m68knommu/pgtable.h b/include/asm-m68knommu/pgtable.h
+index 549ad23..9dfbbc2 100644
+--- a/include/asm-m68knommu/pgtable.h
++++ b/include/asm-m68knommu/pgtable.h
+@@ -59,10 +59,6 @@ extern int is_in_rom(unsigned long);
+ #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+-#define MK_IOSPACE_PFN(space, pfn) (pfn)
+-#define GET_IOSPACE(pfn) 0
+-#define GET_PFN(pfn) (pfn)
+-
+ /*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+diff --git a/include/asm-m68knommu/scatterlist.h b/include/asm-m68knommu/scatterlist.h
+index 2085d6f..4da79d3 100644
+--- a/include/asm-m68knommu/scatterlist.h
++++ b/include/asm-m68knommu/scatterlist.h
+@@ -2,6 +2,7 @@
+ #define _M68KNOMMU_SCATTERLIST_H
+
+ #include <linux/mm.h>
++#include <asm/types.h>
+
+ struct scatterlist {
+ struct page *page;
+diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h
+index 0d3295f..27d77d9 100644
+--- a/include/asm-mips/pgtable.h
++++ b/include/asm-mips/pgtable.h
+@@ -387,10 +387,6 @@ static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+ #endif
+
+-#define MK_IOSPACE_PFN(space, pfn) (pfn)
+-#define GET_IOSPACE(pfn) 0
+-#define GET_PFN(pfn) (pfn)
+-
+ #include <asm-generic/pgtable.h>
+
+ /*
+diff --git a/include/asm-mips/scatterlist.h b/include/asm-mips/scatterlist.h
+index 2263470..7af104c 100644
+--- a/include/asm-mips/scatterlist.h
++++ b/include/asm-mips/scatterlist.h
+@@ -1,6 +1,8 @@
+ #ifndef __ASM_SCATTERLIST_H
+ #define __ASM_SCATTERLIST_H
+
++#include <asm/types.h>
++
+ struct scatterlist {
+ struct page * page;
+ unsigned int offset;
+diff --git a/include/asm-parisc/pgtable.h b/include/asm-parisc/pgtable.h
+index d7e1b10..beb2adb 100644
+--- a/include/asm-parisc/pgtable.h
++++ b/include/asm-parisc/pgtable.h
+@@ -528,10 +528,6 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
+
+ #define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_NO_CACHE)
+
+-#define MK_IOSPACE_PFN(space, pfn) (pfn)
+-#define GET_IOSPACE(pfn) 0
+-#define GET_PFN(pfn) (pfn)
+-
+ /* We provide our own get_unmapped_area to provide cache coherency */
+
+ #define HAVE_ARCH_UNMAPPED_AREA
+diff --git a/include/asm-parisc/scatterlist.h b/include/asm-parisc/scatterlist.h
+index 236c1d0..e7211c7 100644
+--- a/include/asm-parisc/scatterlist.h
++++ b/include/asm-parisc/scatterlist.h
+@@ -2,6 +2,7 @@
+ #define _ASM_PARISC_SCATTERLIST_H
+
+ #include <asm/page.h>
++#include <asm/types.h>
+
+ struct scatterlist {
+ struct page *page;
+diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h
+index b1fdbf4..bed452d 100644
+--- a/include/asm-ppc/pgtable.h
++++ b/include/asm-ppc/pgtable.h
+@@ -827,10 +827,6 @@ static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+ #endif
+
+-#define MK_IOSPACE_PFN(space, pfn) (pfn)
+-#define GET_IOSPACE(pfn) 0
+-#define GET_PFN(pfn) (pfn)
+-
+ /*
+ * No page table caches to initialise
+ */
+diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h
+index 184d7fc..5b523c7 100644
+--- a/include/asm-sh/pgtable.h
++++ b/include/asm-sh/pgtable.h
+@@ -568,10 +568,6 @@ typedef pte_t *pte_addr_t;
+ #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+-#define MK_IOSPACE_PFN(space, pfn) (pfn)
+-#define GET_IOSPACE(pfn) 0
+-#define GET_PFN(pfn) (pfn)
+-
+ struct mm_struct;
+
+ /*
+diff --git a/include/asm-sh/scatterlist.h b/include/asm-sh/scatterlist.h
+index d19e7cd..b9ae53c 100644
+--- a/include/asm-sh/scatterlist.h
++++ b/include/asm-sh/scatterlist.h
+@@ -1,6 +1,8 @@
+ #ifndef __ASM_SH_SCATTERLIST_H
+ #define __ASM_SH_SCATTERLIST_H
+
++#include <asm/types.h>
++
+ struct scatterlist {
+ struct page * page; /* Location for highmem page, if any */
+ unsigned int offset;/* for highmem, page offset */
+diff --git a/include/asm-sh64/pgtable.h b/include/asm-sh64/pgtable.h
+index 6b97c4c..b875482 100644
+--- a/include/asm-sh64/pgtable.h
++++ b/include/asm-sh64/pgtable.h
+@@ -485,10 +485,6 @@ extern void update_mmu_cache(struct vm_area_struct * vma,
+ #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+-#define MK_IOSPACE_PFN(space, pfn) (pfn)
+-#define GET_IOSPACE(pfn) 0
+-#define GET_PFN(pfn) (pfn)
+-
+ #endif /* !__ASSEMBLY__ */
+
+ /*
+diff --git a/include/asm-sh64/scatterlist.h b/include/asm-sh64/scatterlist.h
+index 5d8fa32..1c723f2 100644
+--- a/include/asm-sh64/scatterlist.h
++++ b/include/asm-sh64/scatterlist.h
+@@ -11,6 +11,8 @@
+ #ifndef __ASM_SH64_SCATTERLIST_H
+ #define __ASM_SH64_SCATTERLIST_H
+
++#include <asm/types.h>
++
+ struct scatterlist {
+ struct page * page; /* Location for highmem page, if any */
+ unsigned int offset;/* for highmem, page offset */
+diff --git a/include/asm-sparc64/scatterlist.h b/include/asm-sparc64/scatterlist.h
+index ec4f3c6..048fdb4 100644
+--- a/include/asm-sparc64/scatterlist.h
++++ b/include/asm-sparc64/scatterlist.h
+@@ -3,6 +3,7 @@
+ #define _SPARC64_SCATTERLIST_H
+
+ #include <asm/page.h>
++#include <asm/types.h>
+
+ struct scatterlist {
+ struct page *page;
+diff --git a/include/asm-v850/scatterlist.h b/include/asm-v850/scatterlist.h
+index af1cba6..56f4029 100644
+--- a/include/asm-v850/scatterlist.h
++++ b/include/asm-v850/scatterlist.h
+@@ -14,6 +14,8 @@
+ #ifndef __V850_SCATTERLIST_H__
+ #define __V850_SCATTERLIST_H__
+
++#include <asm/types.h>
++
+ struct scatterlist {
+ struct page *page;
+ unsigned offset;
+diff --git a/include/asm-x86_64/pgtable.h b/include/asm-x86_64/pgtable.h
+index 730bd60..1eb1043 100644
+--- a/include/asm-x86_64/pgtable.h
++++ b/include/asm-x86_64/pgtable.h
+@@ -413,10 +413,6 @@ extern int kern_addr_valid(unsigned long addr);
+ #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+-#define MK_IOSPACE_PFN(space, pfn) (pfn)
+-#define GET_IOSPACE(pfn) 0
+-#define GET_PFN(pfn) (pfn)
+-
+ #define HAVE_ARCH_UNMAPPED_AREA
+
+ #define pgtable_cache_init() do { } while (0)
+diff --git a/include/asm-x86_64/scatterlist.h b/include/asm-x86_64/scatterlist.h
+index 49d89f8..eaf7ada 100644
+--- a/include/asm-x86_64/scatterlist.h
++++ b/include/asm-x86_64/scatterlist.h
+@@ -1,6 +1,8 @@
+ #ifndef _X8664_SCATTERLIST_H
+ #define _X8664_SCATTERLIST_H
+
++#include <asm/types.h>
++
+ struct scatterlist {
+ struct page *page;
+ unsigned int offset;
+diff --git a/include/asm-xtensa/scatterlist.h b/include/asm-xtensa/scatterlist.h
+index 38a2b9a..ca337a2 100644
+--- a/include/asm-xtensa/scatterlist.h
++++ b/include/asm-xtensa/scatterlist.h
+@@ -11,6 +11,8 @@
+ #ifndef _XTENSA_SCATTERLIST_H
+ #define _XTENSA_SCATTERLIST_H
+
++#include <asm/types.h>
++
+ struct scatterlist {
+ struct page *page;
+ unsigned int offset;
+diff --git a/include/linux/fb.h b/include/linux/fb.h
+index be913ec..deb2365 100644
+--- a/include/linux/fb.h
++++ b/include/linux/fb.h
+@@ -833,7 +833,7 @@ struct fb_info {
+ #define fb_writeq sbus_writeq
+ #define fb_memset sbus_memset_io
+
+-#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__)
++#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__) || defined(__avr32__)
+
+ #define fb_readb __raw_readb
+ #define fb_readw __raw_readw
+diff --git a/include/linux/gpio_mouse.h b/include/linux/gpio_mouse.h
+new file mode 100644
+index 0000000..7796683
+--- /dev/null
++++ b/include/linux/gpio_mouse.h
+@@ -0,0 +1,47 @@
++/*
++ * Driver for simulating a mouse on GPIO lines.
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef _GPIO_MOUSE_H
++#define _GPIO_MOUSE_H
++
++#define GPIO_MOUSE_POLARITY_ACT_HIGH 0x00
++#define GPIO_MOUSE_POLARITY_ACT_LOW 0x01
++
++/**
++ * struct gpio_mouse_platform_data
++ * @scan_ms: integer in ms specifying the scan periode.
++ * @polarity: Pin polarity, active high or low.
++ * @up: GPIO line for up value.
++ * @down: GPIO line for down value.
++ * @left: GPIO line for left value.
++ * @right: GPIO line for right value.
++ * @bleft: GPIO line for left button.
++ * @bright: GPIO line for right button.
++ * @bmiddle: GPIO line for middle button.
++ *
++ * This struct must be added to the platform_device in the board code. It is
++ * used by the gpio_mouse driver to setup GPIO lines, calculate mouse movement
++ * and have a reference to the timer used for scanning.
++ */
++struct gpio_mouse_platform_data {
++ int scan_ms;
++ int polarity;
++
++ int up;
++ int down;
++ int left;
++ int right;
++
++ int bleft;
++ int bmiddle;
++ int bright;
++};
++
++#endif /* _GPIO_MOUSE_H */
+diff --git a/include/linux/i2c-gpio.h b/include/linux/i2c-gpio.h
+new file mode 100644
+index 0000000..c1bcb1f
+--- /dev/null
++++ b/include/linux/i2c-gpio.h
+@@ -0,0 +1,38 @@
++/*
++ * i2c-gpio interface to platform code
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef _LINUX_I2C_GPIO_H
++#define _LINUX_I2C_GPIO_H
++
++/**
++ * struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio
++ * @sda_pin: GPIO pin ID to use for SDA
++ * @scl_pin: GPIO pin ID to use for SCL
++ * @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz
++ * @timeout: clock stretching timeout in jiffies. If the slave keeps
++ * SCL low for longer than this, the transfer will time out.
++ * @sda_is_open_drain: SDA is configured as open drain, i.e. the pin
++ * isn't actively driven high when setting the output value high.
++ * gpio_get_value() must return the actual pin state even if the
++ * pin is configured as an output.
++ * @scl_is_open_drain: SCL is set up as open drain. Same requirements
++ * as for sda_is_open_drain apply.
++ * @scl_is_output_only: SCL output drivers cannot be turned off.
++ */
++struct i2c_gpio_platform_data {
++ unsigned int sda_pin;
++ unsigned int scl_pin;
++ int udelay;
++ int timeout;
++ unsigned int sda_is_open_drain:1;
++ unsigned int scl_is_open_drain:1;
++ unsigned int scl_is_output_only:1;
++};
++
++#endif /* _LINUX_I2C_GPIO_H */
+diff --git a/include/linux/spi/at73c213.h b/include/linux/spi/at73c213.h
+new file mode 100644
+index 0000000..44ebe7d
+--- /dev/null
++++ b/include/linux/spi/at73c213.h
+@@ -0,0 +1,26 @@
++/*
++ * Board-specific data used to set up AT73c213 audio DAC driver.
++ */
++
++struct at73c213_board_info {
++
++ /* This identifies a clock suitable for clk_get(NULL, dac_clk).
++ * One might expect something like clk_get(&spidev->dev, "dac") to
++ * work, but current clock framework implementations don't support
++ * association of such clocks with non-core (e.g. SPI) devices.
++ */
++ char dac_clk[8];
++
++ /* SPI is used only for the control interface. Data is streamed
++ * using "I2S" formats through a different interface, with its own
++ * driver and associated resources (registers, irq, clock).
++ */
++ int i2s_dev;
++
++ /* this name is seen by userspace tools */
++ char shortname[32];
++
++ /* REVISIT should target bitrate be provided here?
++ * It can not be provided here, as it has to be calculated when probed
++ */
++};
+diff --git a/include/linux/ssc.h b/include/linux/ssc.h
+new file mode 100644
+index 0000000..9705e4a
+--- /dev/null
++++ b/include/linux/ssc.h
+@@ -0,0 +1,355 @@
++#ifndef __INCLUDE_ATMEL_SSC_H
++#define __INCLUDE_ATMEL_SSC_H
++
++#include <linux/platform_device.h>
++#include <asm/irq.h>
++
++#define ATMEL_SSC_MODE_I2S_MASTER 0x00000001
++#define ATMEL_SSC_MODE_I2S_SLAVE 0x00000002
++#define ATMEL_SSC_MODE_SPI_MASTER 0x00000003
++
++#define ATMEL_SSC_SPI_MODE0 0 /* SPI: CPOL = 0, CPHA = 1 */
++#define ATMEL_SSC_SPI_MODE1 1 /* SPI: CPOL = 0, CHPA = 0 */
++#define ATMEL_SSC_SPI_MODE2 2 /* SPI: CPOL = 1, CPHA = 1 */
++#define ATMEL_SSC_SPI_MODE3 3 /* SPI: CPOL = 1, CPHA = 0 */
++
++struct ssc_device {
++ void __iomem *regs;
++ struct platform_device *pdev;
++ struct clk *clk;
++ char name[6];
++ int user;
++ int irq;
++};
++
++struct ssc_mode {
++ unsigned int mode;
++ unsigned int bauddiv;
++ unsigned int data_length;
++ unsigned int ssc_rxtx;
++ unsigned int spi_mode;
++ unsigned int spi_cs_pio_pin;
++};
++
++struct ssc_xfer_info {
++ unsigned long data;
++ unsigned long len;
++ unsigned long next_data;
++ unsigned long next_len;
++};
++
++struct ssc_device* __must_check ssc_request(unsigned int ssc_num);
++void ssc_free(struct ssc_device *ssc);
++
++int ssc_set_mode(struct ssc_device *ssc, struct ssc_mode *mode);
++
++int ssc_set_rx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer);
++int ssc_get_rx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer);
++int ssc_set_tx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer);
++int ssc_get_tx_buffers(struct ssc_device *ssc, struct ssc_xfer_info *xfer);
++
++int ssc_enable(struct ssc_device *ssc, char tx, char rx);
++int ssc_enable_xfer(struct ssc_device *ssc, char tx, char rx);
++int ssc_disable(struct ssc_device *ssc, char tx, char rx);
++int ssc_disable_xfer(struct ssc_device *ssc, char tx, char rx);
++
++int ssc_enable_int(struct ssc_device *ssc, unsigned int mask);
++int ssc_disable_int(struct ssc_device *ssc, unsigned int mask);
++int ssc_get_int_mask(struct ssc_device *ssc, unsigned int *mask);
++
++int ssc_clk_get_rate(struct ssc_device *ssc);
++
++int ssc_to_irq(struct ssc_device *ssc);
++struct ssc_device* irq_to_ssc(unsigned int irq);
++
++void at32_init_ssc(struct platform_device *pdev);
++
++/* SSC register offsets */
++
++/* SSC Control Register */
++#define SSC_CR 0x00000000
++#define SSC_CR_RXDIS_SIZE 1
++#define SSC_CR_RXDIS_OFFSET 1
++#define SSC_CR_RXEN_SIZE 1
++#define SSC_CR_RXEN_OFFSET 0
++#define SSC_CR_SWRST_SIZE 1
++#define SSC_CR_SWRST_OFFSET 15
++#define SSC_CR_TXDIS_SIZE 1
++#define SSC_CR_TXDIS_OFFSET 9
++#define SSC_CR_TXEN_SIZE 1
++#define SSC_CR_TXEN_OFFSET 8
++
++/* SSC Clock Mode Register */
++#define SSC_CMR 0x00000004
++#define SSC_CMR_DIV_SIZE 12
++#define SSC_CMR_DIV_OFFSET 0
++
++/* SSC Receive Clock Mode Register */
++#define SSC_RCMR 0x00000010
++#define SSC_RCMR_CKG_SIZE 2
++#define SSC_RCMR_CKG_OFFSET 6
++#define SSC_RCMR_CKI_SIZE 1
++#define SSC_RCMR_CKI_OFFSET 5
++#define SSC_RCMR_CKO_SIZE 3
++#define SSC_RCMR_CKO_OFFSET 2
++#define SSC_RCMR_CKS_SIZE 2
++#define SSC_RCMR_CKS_OFFSET 0
++#define SSC_RCMR_PERIOD_SIZE 8
++#define SSC_RCMR_PERIOD_OFFSET 24
++#define SSC_RCMR_START_SIZE 4
++#define SSC_RCMR_START_OFFSET 8
++#define SSC_RCMR_STOP_SIZE 1
++#define SSC_RCMR_STOP_OFFSET 12
++#define SSC_RCMR_STTDLY_SIZE 8
++#define SSC_RCMR_STTDLY_OFFSET 16
++
++/* SSC Receive Frame Mode Register */
++#define SSC_RFMR 0x00000014
++#define SSC_RFMR_DATLEN_SIZE 5
++#define SSC_RFMR_DATLEN_OFFSET 0
++#define SSC_RFMR_DATNB_SIZE 4
++#define SSC_RFMR_DATNB_OFFSET 8
++#define SSC_RFMR_FSEDGE_SIZE 1
++#define SSC_RFMR_FSEDGE_OFFSET 24
++#define SSC_RFMR_FSLEN_SIZE 4
++#define SSC_RFMR_FSLEN_OFFSET 16
++#define SSC_RFMR_FSOS_SIZE 4
++#define SSC_RFMR_FSOS_OFFSET 20
++#define SSC_RFMR_LOOP_SIZE 1
++#define SSC_RFMR_LOOP_OFFSET 5
++#define SSC_RFMR_MSBF_SIZE 1
++#define SSC_RFMR_MSBF_OFFSET 7
++
++/* SSC Transmit Clock Mode Register */
++#define SSC_TCMR 0x00000018
++#define SSC_TCMR_CKG_SIZE 2
++#define SSC_TCMR_CKG_OFFSET 6
++#define SSC_TCMR_CKI_SIZE 1
++#define SSC_TCMR_CKI_OFFSET 5
++#define SSC_TCMR_CKO_SIZE 3
++#define SSC_TCMR_CKO_OFFSET 2
++#define SSC_TCMR_CKS_SIZE 2
++#define SSC_TCMR_CKS_OFFSET 0
++#define SSC_TCMR_PERIOD_SIZE 8
++#define SSC_TCMR_PERIOD_OFFSET 24
++#define SSC_TCMR_START_SIZE 4
++#define SSC_TCMR_START_OFFSET 8
++#define SSC_TCMR_STTDLY_SIZE 8
++#define SSC_TCMR_STTDLY_OFFSET 16
++
++/* SSC Transmit Frame Mode Register */
++#define SSC_TFMR 0x0000001c
++#define SSC_TFMR_DATDEF_SIZE 1
++#define SSC_TFMR_DATDEF_OFFSET 5
++#define SSC_TFMR_DATLEN_SIZE 5
++#define SSC_TFMR_DATLEN_OFFSET 0
++#define SSC_TFMR_DATNB_SIZE 4
++#define SSC_TFMR_DATNB_OFFSET 8
++#define SSC_TFMR_FSDEN_SIZE 1
++#define SSC_TFMR_FSDEN_OFFSET 23
++#define SSC_TFMR_FSEDGE_SIZE 1
++#define SSC_TFMR_FSEDGE_OFFSET 24
++#define SSC_TFMR_FSLEN_SIZE 4
++#define SSC_TFMR_FSLEN_OFFSET 16
++#define SSC_TFMR_FSOS_SIZE 3
++#define SSC_TFMR_FSOS_OFFSET 20
++#define SSC_TFMR_MSBF_SIZE 1
++#define SSC_TFMR_MSBF_OFFSET 7
++
++/* SSC Receive Hold Register */
++#define SSC_RHR 0x00000020
++#define SSC_RHR_RDAT_SIZE 32
++#define SSC_RHR_RDAT_OFFSET 0
++
++/* SSC Transmit Hold Register */
++#define SSC_THR 0x00000024
++#define SSC_THR_TDAT_SIZE 32
++#define SSC_THR_TDAT_OFFSET 0
++
++/* SSC Receive Sync. Holding Register */
++#define SSC_RSHR 0x00000030
++#define SSC_RSHR_RSDAT_SIZE 16
++#define SSC_RSHR_RSDAT_OFFSET 0
++
++/* SSC Transmit Sync. Holding Register */
++#define SSC_TSHR 0x00000034
++#define SSC_TSHR_TSDAT_SIZE 16
++#define SSC_TSHR_RSDAT_OFFSET 0
++
++/* SSC Receive Compare 0 Register */
++#define SSC_RC0R 0x00000038
++#define SSC_RC0R_CP0_SIZE 16
++#define SSC_RC0R_CP0_OFFSET 0
++
++/* SSC Receive Compare 1 Register */
++#define SSC_RC1R 0x0000003c
++#define SSC_RC1R_CP1_SIZE 16
++#define SSC_RC1R_CP1_OFFSET 0
++
++/* SSC Status Register */
++#define SSC_SR 0x00000040
++#define SSC_SR_CP0_SIZE 1
++#define SSC_SR_CP0_OFFSET 8
++#define SSC_SR_CP1_SIZE 1
++#define SSC_SR_CP1_OFFSET 9
++#define SSC_SR_ENDRX_SIZE 1
++#define SSC_SR_ENDRX_OFFSET 6
++#define SSC_SR_ENDTX_SIZE 1
++#define SSC_SR_ENDTX_OFFSET 2
++#define SSC_SR_OVRUN_SIZE 1
++#define SSC_SR_OVRUN_OFFSET 5
++#define SSC_SR_RXBUFF_SIZE 1
++#define SSC_SR_RXBUFF_OFFSET 7
++#define SSC_SR_RXEN_SIZE 1
++#define SSC_SR_RXEN_OFFSET 17
++#define SSC_SR_RXRDY_SIZE 1
++#define SSC_SR_RXRDY_OFFSET 4
++#define SSC_SR_RXSYN_SIZE 1
++#define SSC_SR_RXSYN_OFFSET 11
++#define SSC_SR_TXBUFE_SIZE 1
++#define SSC_SR_TXBUFE_OFFSET 3
++#define SSC_SR_TXEMPTY_SIZE 1
++#define SSC_SR_TXEMPTY_OFFSET 1
++#define SSC_SR_TXEN_SIZE 1
++#define SSC_SR_TXEN_OFFSET 16
++#define SSC_SR_TXRDY_SIZE 1
++#define SSC_SR_TXRDY_OFFSET 0
++#define SSC_SR_TXSYN_SIZE 1
++#define SSC_SR_TXSYN_OFFSET 10
++
++/* SSC Interrupt Enable Register */
++#define SSC_IER 0x00000044
++#define SSC_IER_CP0_SIZE 1
++#define SSC_IER_CP0_OFFSET 8
++#define SSC_IER_CP1_SIZE 1
++#define SSC_IER_CP1_OFFSET 9
++#define SSC_IER_ENDRX_SIZE 1
++#define SSC_IER_ENDRX_OFFSET 6
++#define SSC_IER_ENDTX_SIZE 1
++#define SSC_IER_ENDTX_OFFSET 2
++#define SSC_IER_OVRUN_SIZE 1
++#define SSC_IER_OVRUN_OFFSET 5
++#define SSC_IER_RXBUFF_SIZE 1
++#define SSC_IER_RXBUFF_OFFSET 7
++#define SSC_IER_RXRDY_SIZE 1
++#define SSC_IER_RXRDY_OFFSET 4
++#define SSC_IER_RXSYN_SIZE 1
++#define SSC_IER_RXSYN_OFFSET 11
++#define SSC_IER_TXBUFE_SIZE 1
++#define SSC_IER_TXBUFE_OFFSET 3
++#define SSC_IER_TXEMPTY_SIZE 1
++#define SSC_IER_TXEMPTY_OFFSET 1
++#define SSC_IER_TXRDY_SIZE 1
++#define SSC_IER_TXRDY_OFFSET 0
++#define SSC_IER_TXSYN_SIZE 1
++#define SSC_IER_TXSYN_OFFSET 10
++
++/* SSC Interrupt Disable Register */
++#define SSC_IDR 0x00000048
++#define SSC_IDR_CP0_SIZE 1
++#define SSC_IDR_CP0_OFFSET 8
++#define SSC_IDR_CP1_SIZE 1
++#define SSC_IDR_CP1_OFFSET 9
++#define SSC_IDR_ENDRX_SIZE 1
++#define SSC_IDR_ENDRX_OFFSET 6
++#define SSC_IDR_ENDTX_SIZE 1
++#define SSC_IDR_ENDTX_OFFSET 2
++#define SSC_IDR_OVRUN_SIZE 1
++#define SSC_IDR_OVRUN_OFFSET 5
++#define SSC_IDR_RXBUFF_SIZE 1
++#define SSC_IDR_RXBUFF_OFFSET 7
++#define SSC_IDR_RXRDY_SIZE 1
++#define SSC_IDR_RXRDY_OFFSET 4
++#define SSC_IDR_RXSYN_SIZE 1
++#define SSC_IDR_RXSYN_OFFSET 11
++#define SSC_IDR_TXBUFE_SIZE 1
++#define SSC_IDR_TXBUFE_OFFSET 3
++#define SSC_IDR_TXEMPTY_SIZE 1
++#define SSC_IDR_TXEMPTY_OFFSET 1
++#define SSC_IDR_TXRDY_SIZE 1
++#define SSC_IDR_TXRDY_OFFSET 0
++#define SSC_IDR_TXSYN_SIZE 1
++#define SSC_IDR_TXSYN_OFFSET 10
++
++/* SSC Interrupt Mask Register */
++#define SSC_IMR 0x0000004c
++#define SSC_IMR_CP0_SIZE 1
++#define SSC_IMR_CP0_OFFSET 8
++#define SSC_IMR_CP1_SIZE 1
++#define SSC_IMR_CP1_OFFSET 9
++#define SSC_IMR_ENDRX_SIZE 1
++#define SSC_IMR_ENDRX_OFFSET 6
++#define SSC_IMR_ENDTX_SIZE 1
++#define SSC_IMR_ENDTX_OFFSET 2
++#define SSC_IMR_OVRUN_SIZE 1
++#define SSC_IMR_OVRUN_OFFSET 5
++#define SSC_IMR_RXBUFF_SIZE 1
++#define SSC_IMR_RXBUFF_OFFSET 7
++#define SSC_IMR_RXRDY_SIZE 1
++#define SSC_IMR_RXRDY_OFFSET 4
++#define SSC_IMR_RXSYN_SIZE 1
++#define SSC_IMR_RXSYN_OFFSET 11
++#define SSC_IMR_TXBUFE_SIZE 1
++#define SSC_IMR_TXBUFE_OFFSET 3
++#define SSC_IMR_TXEMPTY_SIZE 1
++#define SSC_IMR_TXEMPTY_OFFSET 1
++#define SSC_IMR_TXRDY_SIZE 1
++#define SSC_IMR_TXRDY_OFFSET 0
++#define SSC_IMR_TXSYN_SIZE 1
++#define SSC_IMR_TXSYN_OFFSET 10
++
++/* SSC PDC Receive Pointer Register */
++#define SSC_PDC_RPR 0x00000100
++
++/* SSC PDC Receive Counter Register */
++#define SSC_PDC_RCR 0x00000104
++
++/* SSC PDC Transmit Pointer Register */
++#define SSC_PDC_TPR 0x00000108
++
++/* SSC PDC Receive Next Pointer Register */
++#define SSC_PDC_RNPR 0x00000110
++
++/* SSC PDC Receive Next Counter Register */
++#define SSC_PDC_RNCR 0x00000114
++
++/* SSC PDC Transmit Counter Register */
++#define SSC_PDC_TCR 0x0000010c
++
++/* SSC PDC Transmit Next Pointer Register */
++#define SSC_PDC_TNPR 0x00000118
++
++/* SSC PDC Transmit Next Counter Register */
++#define SSC_PDC_TNCR 0x0000011c
++
++/* SSC PDC Transfer Control Register */
++#define SSC_PDC_PTCR 0x00000120
++#define SSC_PDC_PTCR_RXTDIS_SIZE 1
++#define SSC_PDC_PTCR_RXTDIS_OFFSET 1
++#define SSC_PDC_PTCR_RXTEN_SIZE 1
++#define SSC_PDC_PTCR_RXTEN_OFFSET 0
++#define SSC_PDC_PTCR_TXTDIS_SIZE 1
++#define SSC_PDC_PTCR_TXTDIS_OFFSET 9
++#define SSC_PDC_PTCR_TXTEN_SIZE 1
++#define SSC_PDC_PTCR_TXTEN_OFFSET 8
++
++/* SSC PDC Transfer Status Register */
++#define SSC_PDC_PTSR 0x00000124
++#define SSC_PDC_PTSR_RXTEN_SIZE 1
++#define SSC_PDC_PTSR_RXTEN_OFFSET 0
++#define SSC_PDC_PTSR_TXTEN_SIZE 1
++#define SSC_PDC_PTSR_TXTEN_OFFSET 8
++
++/* Bit manipulation macros */
++#define SSC_BIT(name) (1 << SSC_##name##_OFFSET)
++#define SSC_BF(name,value) (((value) & ((1 << SSC_##name##_SIZE) - 1)) << SSC_##name##_OFFSET)
++#define SSC_BFEXT(name,value) (((value) >> SSC_##name##_OFFSET) & ((1 << SSC_##name##_SIZE) - 1))
++#define SSC_BFINS(name,value,old) (((old) & ~(((1 << SSC_##name##_SIZE) - 1) << SSC_##name##_OFFSET)) | SSC_BF(name,value))
++
++/* Register access macros */
++#define ssc_readl(port,reg) \
++ __raw_readl((port)->regs + SSC_##reg)
++#define ssc_writel(port,reg,value) \
++ __raw_writel((value), (port)->regs + SSC_##reg)
++
++#endif /* __INCLUDE_ATMEL_SSC_H */
+diff --git a/include/pcmcia/cs_types.h b/include/pcmcia/cs_types.h
+index c1d1629..5f38803 100644
+--- a/include/pcmcia/cs_types.h
++++ b/include/pcmcia/cs_types.h
+@@ -21,7 +21,7 @@
+ #include <sys/types.h>
+ #endif
+
+-#if defined(__arm__) || defined(__mips__)
++#if defined(__arm__) || defined(__mips__) || defined(__avr32__)
+ /* This (ioaddr_t) is exposed to userspace & hence cannot be changed. */
+ typedef u_int ioaddr_t;
+ #else
+diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
+new file mode 100644
+index 0000000..4eea637
+--- /dev/null
++++ b/include/video/atmel_lcdc.h
+@@ -0,0 +1,196 @@
++/*
++ * Header file for AT91/AT32 LCD Controller
++ *
++ * Data structure and register user interface
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#ifndef __ATMEL_LCDC_H__
++#define __ATMEL_LCDC_H__
++
++ /* LCD Controller info data structure */
++struct atmel_lcdfb_info {
++ spinlock_t lock;
++ struct fb_info *info;
++ void __iomem *mmio;
++ unsigned long irq_base;
++
++ unsigned int guard_time;
++ struct platform_device *pdev;
++ struct clk *bus_clk;
++ struct clk *lcdc_clk;
++ unsigned int default_bpp;
++ unsigned int default_lcdcon2;
++ unsigned int default_dmacon;
++ void (*atmel_lcdfb_power_control)(int on);
++ struct fb_monspecs *default_monspecs;
++ u32 pseudo_palette[16];
++};
++
++#define ATMEL_LCDC_DMABADDR1 0x00
++#define ATMEL_LCDC_DMABADDR2 0x04
++#define ATMEL_LCDC_DMAFRMPT1 0x08
++#define ATMEL_LCDC_DMAFRMPT2 0x0c
++#define ATMEL_LCDC_DMAFRMADD1 0x10
++#define ATMEL_LCDC_DMAFRMADD2 0x14
++
++#define ATMEL_LCDC_DMAFRMCFG 0x18
++#define ATMEL_LCDC_FRSIZE (0x7fffff << 0)
++#define ATMEL_LCDC_BLENGTH_OFFSET 24
++#define ATMEL_LCDC_BLENGTH (0x7f << ATMEL_LCDC_BLENGTH_OFFSET)
++
++#define ATMEL_LCDC_DMACON 0x1c
++#define ATMEL_LCDC_DMAEN (0x1 << 0)
++#define ATMEL_LCDC_DMARST (0x1 << 1)
++#define ATMEL_LCDC_DMABUSY (0x1 << 2)
++#define ATMEL_LCDC_DMAUPDT (0x1 << 3)
++#define ATMEL_LCDC_DMA2DEN (0x1 << 4)
++
++#define ATMEL_LCDC_DMA2DCFG 0x20
++#define ATMEL_LCDC_ADDRINC_OFFSET 0
++#define ATMEL_LCDC_ADDRINC (0xffff)
++#define ATMEL_LCDC_PIXELOFF_OFFSET 24
++#define ATMEL_LCDC_PIXELOFF (0x1f << 24)
++
++#define ATMEL_LCDC_LCDCON1 0x0800
++#define ATMEL_LCDC_BYPASS (1 << 0)
++#define ATMEL_LCDC_CLKVAL_OFFSET 12
++#define ATMEL_LCDC_CLKVAL (0x1ff << ATMEL_LCDC_CLKVAL_OFFSET)
++#define ATMEL_LCDC_LINCNT (0x7ff << 21)
++
++#define ATMEL_LCDC_LCDCON2 0x0804
++#define ATMEL_LCDC_DISTYPE (3 << 0)
++#define ATMEL_LCDC_DISTYPE_STNMONO (0 << 0)
++#define ATMEL_LCDC_DISTYPE_STNCOLOR (1 << 0)
++#define ATMEL_LCDC_DISTYPE_TFT (2 << 0)
++#define ATMEL_LCDC_SCANMOD (1 << 2)
++#define ATMEL_LCDC_SCANMOD_SINGLE (0 << 2)
++#define ATMEL_LCDC_SCANMOD_DUAL (1 << 2)
++#define ATMEL_LCDC_IFWIDTH (3 << 3)
++#define ATMEL_LCDC_IFWIDTH_4 (0 << 3)
++#define ATMEL_LCDC_IFWIDTH_8 (1 << 3)
++#define ATMEL_LCDC_IFWIDTH_16 (2 << 3)
++#define ATMEL_LCDC_PIXELSIZE (7 << 5)
++#define ATMEL_LCDC_PIXELSIZE_1 (0 << 5)
++#define ATMEL_LCDC_PIXELSIZE_2 (1 << 5)
++#define ATMEL_LCDC_PIXELSIZE_4 (2 << 5)
++#define ATMEL_LCDC_PIXELSIZE_8 (3 << 5)
++#define ATMEL_LCDC_PIXELSIZE_16 (4 << 5)
++#define ATMEL_LCDC_PIXELSIZE_24 (5 << 5)
++#define ATMEL_LCDC_PIXELSIZE_32 (6 << 5)
++#define ATMEL_LCDC_INVVD (1 << 8)
++#define ATMEL_LCDC_INVVD_NORMAL (0 << 8)
++#define ATMEL_LCDC_INVVD_INVERTED (1 << 8)
++#define ATMEL_LCDC_INVFRAME (1 << 9 )
++#define ATMEL_LCDC_INVFRAME_NORMAL (0 << 9)
++#define ATMEL_LCDC_INVFRAME_INVERTED (1 << 9)
++#define ATMEL_LCDC_INVLINE (1 << 10)
++#define ATMEL_LCDC_INVLINE_NORMAL (0 << 10)
++#define ATMEL_LCDC_INVLINE_INVERTED (1 << 10)
++#define ATMEL_LCDC_INVCLK (1 << 11)
++#define ATMEL_LCDC_INVCLK_NORMAL (0 << 11)
++#define ATMEL_LCDC_INVCLK_INVERTED (1 << 11)
++#define ATMEL_LCDC_INVDVAL (1 << 12)
++#define ATMEL_LCDC_INVDVAL_NORMAL (0 << 12)
++#define ATMEL_LCDC_INVDVAL_INVERTED (1 << 12)
++#define ATMEL_LCDC_CLKMOD (1 << 15)
++#define ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15)
++#define ATMEL_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15)
++#define ATMEL_LCDC_MEMOR (1 << 31)
++#define ATMEL_LCDC_MEMOR_BIG (0 << 31)
++#define ATMEL_LCDC_MEMOR_LITTLE (1 << 31)
++
++#define ATMEL_LCDC_TIM1 0x0808
++#define ATMEL_LCDC_VFP (0xff << 0)
++#define ATMEL_LCDC_VBP_OFFSET 8
++#define ATMEL_LCDC_VBP (0xff << ATMEL_LCDC_VBP_OFFSET)
++#define ATMEL_LCDC_VPW_OFFSET 16
++#define ATMEL_LCDC_VPW (0x3f << ATMEL_LCDC_VPW_OFFSET)
++#define ATMEL_LCDC_VHDLY_OFFSET 24
++#define ATMEL_LCDC_VHDLY (0xf << ATMEL_LCDC_VHDLY_OFFSET)
++
++#define ATMEL_LCDC_TIM2 0x080c
++#define ATMEL_LCDC_HBP (0xff << 0)
++#define ATMEL_LCDC_HPW_OFFSET 8
++#define ATMEL_LCDC_HPW (0x3f << ATMEL_LCDC_HPW_OFFSET)
++#define ATMEL_LCDC_HFP_OFFSET 21
++#define ATMEL_LCDC_HFP (0x7ff << ATMEL_LCDC_HFP_OFFSET)
++
++#define ATMEL_LCDC_LCDFRMCFG 0x0810
++#define ATMEL_LCDC_LINEVAL (0x7ff << 0)
++#define ATMEL_LCDC_HOZVAL_OFFSET 21
++#define ATMEL_LCDC_HOZVAL (0x7ff << ATMEL_LCDC_HOZVAL_OFFSET)
++
++#define ATMEL_LCDC_FIFO 0x0814
++#define ATMEL_LCDC_FIFOTH (0xffff)
++
++#define ATMEL_LCDC_MVAL 0x0818
++
++#define ATMEL_LCDC_DP1_2 0x081c
++#define ATMEL_LCDC_DP4_7 0x0820
++#define ATMEL_LCDC_DP3_5 0x0824
++#define ATMEL_LCDC_DP2_3 0x0828
++#define ATMEL_LCDC_DP5_7 0x082c
++#define ATMEL_LCDC_DP3_4 0x0830
++#define ATMEL_LCDC_DP4_5 0x0834
++#define ATMEL_LCDC_DP6_7 0x0838
++#define ATMEL_LCDC_DP1_2_VAL (0xff)
++#define ATMEL_LCDC_DP4_7_VAL (0xfffffff)
++#define ATMEL_LCDC_DP3_5_VAL (0xfffff)
++#define ATMEL_LCDC_DP2_3_VAL (0xfff)
++#define ATMEL_LCDC_DP5_7_VAL (0xfffffff)
++#define ATMEL_LCDC_DP3_4_VAL (0xffff)
++#define ATMEL_LCDC_DP4_5_VAL (0xfffff)
++#define ATMEL_LCDC_DP6_7_VAL (0xfffffff)
++
++#define ATMEL_LCDC_PWRCON 0x083c
++#define ATMEL_LCDC_PWR (1 << 0)
++#define ATMEL_LCDC_GUARDT_OFFSET 1
++#define ATMEL_LCDC_GUARDT (0x7f << ATMEL_LCDC_GUARDT_OFFSET)
++#define ATMEL_LCDC_BUSY (1 << 31)
++
++#define ATMEL_LCDC_CONTRAST_CTR 0x0840
++#define ATMEL_LCDC_PS (3 << 0)
++#define ATMEL_LCDC_PS_DIV1 (0 << 0)
++#define ATMEL_LCDC_PS_DIV2 (1 << 0)
++#define ATMEL_LCDC_PS_DIV4 (2 << 0)
++#define ATMEL_LCDC_PS_DIV8 (3 << 0)
++#define ATMEL_LCDC_POL (1 << 2)
++#define ATMEL_LCDC_POL_NEGATIVE (0 << 2)
++#define ATMEL_LCDC_POL_POSITIVE (1 << 2)
++#define ATMEL_LCDC_ENA (1 << 3)
++#define ATMEL_LCDC_ENA_PWMDISABLE (0 << 3)
++#define ATMEL_LCDC_ENA_PWMENABLE (1 << 3)
++
++#define ATMEL_LCDC_CONTRAST_VAL 0x0844
++#define ATMEL_LCDC_CVAL (0xff)
++
++#define ATMEL_LCDC_IER 0x0848
++#define ATMEL_LCDC_IDR 0x084c
++#define ATMEL_LCDC_IMR 0x0850
++#define ATMEL_LCDC_ISR 0x0854
++#define ATMEL_LCDC_ICR 0x0858
++#define ATMEL_LCDC_LNI (1 << 0)
++#define ATMEL_LCDC_LSTLNI (1 << 1)
++#define ATMEL_LCDC_EOFI (1 << 2)
++#define ATMEL_LCDC_UFLWI (1 << 4)
++#define ATMEL_LCDC_OWRI (1 << 5)
++#define ATMEL_LCDC_MERI (1 << 6)
++
++#define ATMEL_LCDC_LUT(n) (0x0c00 + ((n)*4))
++
++#endif /* __ATMEL_LCDC_H__ */
+diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
+index f7844f6..6631586 100755
+--- a/scripts/checkstack.pl
++++ b/scripts/checkstack.pl
+@@ -12,6 +12,7 @@
+ # sh64 port by Paul Mundt
+ # Random bits by Matt Mackall <mpm@selenic.com>
+ # M68k port by Geert Uytterhoeven and Andreas Schwab
++# AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
+ #
+ # Usage:
+ # objdump -d vmlinux | stackcheck.pl [arch]
+@@ -37,6 +38,10 @@ my (@stack, $re, $x, $xs);
+ if ($arch eq 'arm') {
+ #c0008ffc: e24dd064 sub sp, sp, #100 ; 0x64
+ $re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
++ } elsif ($arch eq 'avr32') {
++ #8000008a: 20 1d sub sp,4
++ #80000ca8: fa cd 05 b0 sub sp,sp,1456
++ $re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
+ } elsif ($arch =~ /^i[3456]86$/) {
+ #c0105234: 81 ec ac 05 00 00 sub $0x5ac,%esp
+ $re = qr/^.*[as][du][db] \$(0x$x{1,8}),\%esp$/o;
+diff --git a/sound/Kconfig b/sound/Kconfig
+index 97532bb..2bad674 100644
+--- a/sound/Kconfig
++++ b/sound/Kconfig
+@@ -62,9 +62,13 @@ source "sound/aoa/Kconfig"
+
+ source "sound/arm/Kconfig"
+
++source "sound/spi/Kconfig"
++
++source "sound/avr32/Kconfig"
++
+ source "sound/mips/Kconfig"
+
+-# the following will depend on the order of config.
++# tee following will depend on the order of config.
+ # here assuming USB is defined before ALSA
+ source "sound/usb/Kconfig"
+
+diff --git a/sound/Makefile b/sound/Makefile
+index b7c7fb7..fda6893 100644
+--- a/sound/Makefile
++++ b/sound/Makefile
+@@ -5,7 +5,8 @@ obj-$(CONFIG_SOUND) += soundcore.o
+ obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o
+ obj-$(CONFIG_SOUND_PRIME) += oss/
+ obj-$(CONFIG_DMASOUND) += oss/
+-obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/ soc/
++obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ avr32/ synth/ usb/ \
++ sparc/ spi/ parisc/ pcmcia/ mips/ soc/
+ obj-$(CONFIG_SND_AOA) += aoa/
+
+ # This one must be compilable even if sound is configured out
+diff --git a/sound/avr32/Kconfig b/sound/avr32/Kconfig
+new file mode 100644
+index 0000000..adfe779
+--- /dev/null
++++ b/sound/avr32/Kconfig
+@@ -0,0 +1,12 @@
++menu "AVR32 devices"
++ depends on SND != n && AVR32
++
++config SND_ATMEL_AC97
++ tristate "Atmel AC97 Controller Driver"
++ depends on SND
++ select SND_PCM
++ select SND_AC97_CODEC
++ help
++ ALSA sound driver for the Atmel AC97 controller.
++
++endmenu
+diff --git a/sound/avr32/Makefile b/sound/avr32/Makefile
+new file mode 100644
+index 0000000..fd864b7
+--- /dev/null
++++ b/sound/avr32/Makefile
+@@ -0,0 +1,6 @@
++#
++# Makefile for ALSA
++#
++
++snd-atmel-ac97-objs := ac97c.o
++obj-$(CONFIG_SND_ATMEL_AC97) += snd-atmel-ac97.o
+diff --git a/sound/avr32/ac97c.c b/sound/avr32/ac97c.c
+new file mode 100644
+index 0000000..32f6639
+--- /dev/null
++++ b/sound/avr32/ac97c.c
+@@ -0,0 +1,880 @@
++/*
++ * Driver for the Atmel AC97 Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/mutex.h>
++
++#include <sound/driver.h>
++#include <sound/core.h>
++#include <sound/initval.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/ac97_codec.h>
++#include <sound/memalloc.h>
++
++#include <asm/io.h>
++#include <asm/dma-controller.h>
++
++#include "ac97c.h"
++
++/*
++ * Module parameters
++ */
++static char *id;
++module_param(id, charp, 0444);
++MODULE_PARM_DESC(id, "ID string for Atmel AC97 controller");
++
++static DEFINE_MUTEX(opened_mutex);
++
++struct atmel_ac97_dma_info {
++ struct dma_request_cyclic req_tx;
++ struct dma_request_cyclic req_rx;
++ unsigned short rx_periph_id;
++ unsigned short tx_periph_id;
++};
++
++typedef struct atmel_ac97 {
++ spinlock_t lock;
++ void __iomem *regs;
++ struct snd_pcm_substream *playback_substream;
++ struct snd_pcm_substream *capture_substream;
++ struct snd_card *card;
++ struct snd_pcm *pcm;
++ struct snd_ac97 *ac97;
++ struct snd_ac97_bus *ac97_bus;
++ int opened;
++ int period;
++ u64 cur_format;
++ unsigned int cur_rate;
++ struct clk *mck;
++ struct platform_device *pdev;
++ struct atmel_ac97_dma_info dma;
++} atmel_ac97_t;
++#define get_chip(card) ((atmel_ac97_t *)(card)->private_data)
++
++#define ac97c_writel(chip, reg, val) \
++ __raw_writel((val), (chip)->regs + AC97C_##reg)
++#define ac97c_readl(chip, reg) \
++ __raw_readl((chip)->regs + AC97C_##reg)
++
++/*
++ * PCM part
++ */
++static struct snd_pcm_hardware snd_atmel_ac97_playback_hw = {
++ .info = (SNDRV_PCM_INFO_INTERLEAVED
++ |SNDRV_PCM_INFO_MMAP
++ |SNDRV_PCM_INFO_MMAP_VALID
++ |SNDRV_PCM_INFO_BLOCK_TRANSFER
++ |SNDRV_PCM_INFO_JOINT_DUPLEX),
++ .formats = (SNDRV_PCM_FMTBIT_S16_BE|SNDRV_PCM_FMTBIT_S16_LE),
++ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
++ .rate_min = 4000,
++ .rate_max = 48000,
++ .channels_min = 1,
++ .channels_max = 6,
++ .buffer_bytes_max = 64*1024,
++ .period_bytes_min = 512,
++ .period_bytes_max = 4095,
++ .periods_min = 8,
++ .periods_max = 1024,
++};
++
++static struct snd_pcm_hardware snd_atmel_ac97_capture_hw = {
++ .info = (SNDRV_PCM_INFO_INTERLEAVED
++ |SNDRV_PCM_INFO_MMAP
++ |SNDRV_PCM_INFO_MMAP_VALID
++ |SNDRV_PCM_INFO_BLOCK_TRANSFER
++ |SNDRV_PCM_INFO_JOINT_DUPLEX),
++ .formats = (SNDRV_PCM_FMTBIT_S16_BE|SNDRV_PCM_FMTBIT_S16_LE),
++ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
++ .rate_min = 4000,
++ .rate_max = 48000,
++ .channels_min = 1,
++ .channels_max = 2,
++ .buffer_bytes_max = 64*1024,
++ .period_bytes_min = 512,
++ .period_bytes_max = 4095,
++ .periods_min = 8,
++ .periods_max = 1024,
++};
++
++/* Joint full duplex variables */
++unsigned int hw_rates[1];
++unsigned int hw_formats[1];
++struct snd_pcm_hw_constraint_list hw_constraint_rates;
++struct snd_pcm_hw_constraint_list hw_constraint_formats;
++
++/*
++ * PCM functions
++ */
++static int
++snd_atmel_ac97_playback_open(struct snd_pcm_substream *substream)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++
++ mutex_lock(&opened_mutex);
++ chip->opened++;
++ runtime->hw = snd_atmel_ac97_playback_hw;
++ if (chip->cur_rate) {
++ runtime->hw.rate_min = chip->cur_rate;
++ runtime->hw.rate_max = chip->cur_rate;
++ }
++ if (chip->cur_format)
++ runtime->hw.formats = (1ULL<<chip->cur_format);
++ mutex_unlock(&opened_mutex);
++ chip->playback_substream = substream;
++ chip->period = 0;
++ return 0;
++}
++
++static int
++snd_atmel_ac97_capture_open(struct snd_pcm_substream *substream)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++
++ mutex_lock(&opened_mutex);
++ chip->opened++;
++ runtime->hw = snd_atmel_ac97_capture_hw;
++ if (chip->cur_rate) {
++ runtime->hw.rate_min = chip->cur_rate;
++ runtime->hw.rate_max = chip->cur_rate;
++ }
++ if (chip->cur_format)
++ runtime->hw.formats = (1ULL<<chip->cur_format);
++ mutex_unlock(&opened_mutex);
++ chip->capture_substream = substream;
++ chip->period = 0;
++ return 0;
++}
++
++static int snd_atmel_ac97_playback_close(struct snd_pcm_substream *substream)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ mutex_lock(&opened_mutex);
++ chip->opened--;
++ if (!chip->opened) {
++ chip->cur_rate = 0;
++ chip->cur_format = 0;
++ }
++ mutex_unlock(&opened_mutex);
++ return 0;
++}
++
++static int snd_atmel_ac97_capture_close(struct snd_pcm_substream *substream)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ mutex_lock(&opened_mutex);
++ chip->opened--;
++ if (!chip->opened) {
++ chip->cur_rate = 0;
++ chip->cur_format = 0;
++ }
++ mutex_unlock(&opened_mutex);
++ return 0;
++}
++
++static int snd_atmel_ac97_playback_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *hw_params)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ int err;
++
++ err = snd_pcm_lib_malloc_pages(substream,
++ params_buffer_bytes(hw_params));
++ if (err < 0)
++ return err;
++
++ /* Set restrictions to params */
++ mutex_lock(&opened_mutex);
++ chip->cur_rate = params_rate(hw_params);
++ chip->cur_format = params_format(hw_params);
++ mutex_unlock(&opened_mutex);
++
++ return 0;
++}
++
++static int snd_atmel_ac97_capture_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *hw_params)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ int err;
++
++ err = snd_pcm_lib_malloc_pages(substream,
++ params_buffer_bytes(hw_params));
++ if (err < 0)
++ return err;
++
++ /* Set restrictions to params */
++ mutex_lock(&opened_mutex);
++ chip->cur_rate = params_rate(hw_params);
++ chip->cur_format = params_format(hw_params);
++ mutex_unlock(&opened_mutex);
++
++ return 0;
++}
++
++static int snd_atmel_ac97_playback_hw_free(struct snd_pcm_substream *substream)
++{
++ return snd_pcm_lib_free_pages(substream);
++}
++
++static int snd_atmel_ac97_capture_hw_free(struct snd_pcm_substream *substream)
++{
++
++ return snd_pcm_lib_free_pages(substream);
++}
++
++static int snd_atmel_ac97_playback_prepare(struct snd_pcm_substream *substream)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ struct platform_device *pdev = chip->pdev;
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ int block_size = frames_to_bytes(runtime, runtime->period_size);
++ unsigned long word = 0;
++ unsigned long buffer_size = 0;
++
++ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
++ block_size * 2, DMA_TO_DEVICE);
++
++ /* Assign slots to channels */
++ switch (substream->runtime->channels) {
++ case 1:
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
++ break;
++ case 2:
++ /* Assign Left and Right slot to Channel A */
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
++ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
++ break;
++ default:
++ /* TODO: support more than two channels */
++ return -EINVAL;
++ break;
++ }
++ ac97c_writel(chip, OCA, word);
++
++ /* Configure sample format and size */
++ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
++
++ switch (runtime->format){
++ case SNDRV_PCM_FORMAT_S16_LE:
++ word |= AC97C_CMR_CEM_LITTLE;
++ break;
++ case SNDRV_PCM_FORMAT_S16_BE:
++ default:
++ word &= ~AC97C_CMR_CEM_LITTLE;
++ break;
++ }
++
++ ac97c_writel(chip, CAMR, word);
++
++ /* Set variable rate if needed */
++ if (runtime->rate != 48000) {
++ word = ac97c_readl(chip, MR);
++ word |= AC97C_MR_VRA;
++ ac97c_writel(chip, MR, word);
++ } else {
++ /* Clear Variable Rate Bit */
++ word = ac97c_readl(chip, MR);
++ word &= ~AC97C_MR_VRA;
++ ac97c_writel(chip, MR, word);
++ }
++
++ /* Set rate */
++ snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
++
++ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
++ runtime->periods;
++
++ chip->dma.req_tx.buffer_size = buffer_size;
++ chip->dma.req_tx.periods = runtime->periods;
++
++ BUG_ON(chip->dma.req_tx.buffer_size !=
++ (chip->dma.req_tx.periods *
++ frames_to_bytes(runtime, runtime->period_size)));
++
++ chip->dma.req_tx.buffer_start = runtime->dma_addr;
++ chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
++ chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
++ chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
++ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_tx.dev_id = chip;
++
++ return 0;
++}
++
++static int snd_atmel_ac97_capture_prepare(struct snd_pcm_substream *substream)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ struct platform_device *pdev = chip->pdev;
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ int block_size = frames_to_bytes(runtime, runtime->period_size);
++ unsigned long word = 0;
++ unsigned long buffer_size = 0;
++
++ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
++ block_size * 2, DMA_FROM_DEVICE);
++
++ /* Assign slots to channels */
++ switch (substream->runtime->channels) {
++ case 1:
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
++ break;
++ case 2:
++ /* Assign Left and Right slot to Channel A */
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
++ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
++ break;
++ default:
++ /* TODO: support more than two channels */
++ return -EINVAL;
++ break;
++ }
++ ac97c_writel(chip, ICA, word);
++
++ /* Configure sample format and size */
++ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
++
++ switch (runtime->format) {
++ case SNDRV_PCM_FORMAT_S16_LE:
++ word |= AC97C_CMR_CEM_LITTLE;
++ break;
++ case SNDRV_PCM_FORMAT_S16_BE:
++ default:
++ word &= ~(AC97C_CMR_CEM_LITTLE);
++ break;
++ }
++
++ ac97c_writel(chip, CAMR, word);
++
++ /* Set variable rate if needed */
++ if (runtime->rate != 48000) {
++ word = ac97c_readl(chip, MR);
++ word |= AC97C_MR_VRA;
++ ac97c_writel(chip, MR, word);
++ } else {
++ /* Clear Variable Rate Bit */
++ word = ac97c_readl(chip, MR);
++ word &= ~(AC97C_MR_VRA);
++ ac97c_writel(chip, MR, word);
++ }
++
++ /* Set rate */
++ snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
++
++ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
++ runtime->periods;
++
++ chip->dma.req_rx.buffer_size = buffer_size;
++ chip->dma.req_rx.periods = runtime->periods;
++
++ BUG_ON(chip->dma.req_rx.buffer_size !=
++ (chip->dma.req_rx.periods *
++ frames_to_bytes(runtime, runtime->period_size)));
++
++ chip->dma.req_rx.buffer_start = runtime->dma_addr;
++ chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
++ chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
++ chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
++ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_rx.dev_id = chip;
++
++ return 0;
++}
++
++static int snd_atmel_ac97_playback_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ unsigned long camr;
++ int flags, err = 0;
++
++ spin_lock_irqsave(&chip->lock, flags);
++ camr = ac97c_readl(chip, CAMR);
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
++ &chip->dma.req_tx);
++ dma_start_request(chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel);
++ camr |= AC97C_CMR_CENA;
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ err = dma_stop_request(chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel);
++ if (chip->opened <= 1)
++ camr &= ~AC97C_CMR_CENA;
++ break;
++ default:
++ err = -EINVAL;
++ break;
++ }
++
++ ac97c_writel(chip, CAMR, camr);
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++ return err;
++}
++
++static int snd_atmel_ac97_capture_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ unsigned long camr;
++ int flags, err = 0;
++
++ spin_lock_irqsave(&chip->lock, flags);
++ camr = ac97c_readl(chip, CAMR);
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
++ &chip->dma.req_rx);
++ dma_start_request(chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel);
++ camr |= AC97C_CMR_CENA;
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ err = dma_stop_request(chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel);
++ mutex_lock(&opened_mutex);
++ if (chip->opened <= 1)
++ camr &= ~AC97C_CMR_CENA;
++ mutex_unlock(&opened_mutex);
++ break;
++ default:
++ err = -EINVAL;
++ break;
++ }
++
++ ac97c_writel(chip, CAMR, camr);
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++ return err;
++}
++
++static snd_pcm_uframes_t snd_atmel_ac97_playback_pointer(struct snd_pcm_substream *substream)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ snd_pcm_uframes_t pos;
++ unsigned long bytes;
++
++ bytes = (dma_get_current_pos
++ (chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel) - runtime->dma_addr);
++ pos = bytes_to_frames(runtime, bytes);
++ if (pos >= runtime->buffer_size)
++ pos -= runtime->buffer_size;
++
++ return pos;
++}
++
++static snd_pcm_uframes_t snd_atmel_ac97_capture_pointer(struct snd_pcm_substream *substream)
++{
++ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ snd_pcm_uframes_t pos;
++ unsigned long bytes;
++
++ bytes = (dma_get_current_pos
++ (chip->dma.req_rx.req.dmac,chip->dma.req_rx.req.channel) -
++ runtime->dma_addr);
++ pos = bytes_to_frames(runtime, bytes);
++ if (pos >= runtime->buffer_size)
++ pos -= runtime->buffer_size;
++
++
++ return pos;
++}
++
++static struct snd_pcm_ops atmel_ac97_playback_ops = {
++ .open = snd_atmel_ac97_playback_open,
++ .close = snd_atmel_ac97_playback_close,
++ .ioctl = snd_pcm_lib_ioctl,
++ .hw_params = snd_atmel_ac97_playback_hw_params,
++ .hw_free = snd_atmel_ac97_playback_hw_free,
++ .prepare = snd_atmel_ac97_playback_prepare,
++ .trigger = snd_atmel_ac97_playback_trigger,
++ .pointer = snd_atmel_ac97_playback_pointer,
++};
++
++static struct snd_pcm_ops atmel_ac97_capture_ops = {
++ .open = snd_atmel_ac97_capture_open,
++ .close = snd_atmel_ac97_capture_close,
++ .ioctl = snd_pcm_lib_ioctl,
++ .hw_params = snd_atmel_ac97_capture_hw_params,
++ .hw_free = snd_atmel_ac97_capture_hw_free,
++ .prepare = snd_atmel_ac97_capture_prepare,
++ .trigger = snd_atmel_ac97_capture_trigger,
++ .pointer = snd_atmel_ac97_capture_pointer,
++};
++
++static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
++ /* Playback */
++ {
++ .exclusive = 1,
++ .r = { {
++ .slots = ((1 << AC97_SLOT_PCM_LEFT)
++ | (1 << AC97_SLOT_PCM_RIGHT)
++ | (1 << AC97_SLOT_PCM_CENTER)
++ | (1 << AC97_SLOT_PCM_SLEFT)
++ | (1 << AC97_SLOT_PCM_SRIGHT)
++ | (1 << AC97_SLOT_LFE)),
++ } }
++ },
++ /* PCM in */
++ {
++ .stream = 1,
++ .exclusive = 1,
++ .r = { {
++ .slots = ((1 << AC97_SLOT_PCM_LEFT)
++ | (1 << AC97_SLOT_PCM_RIGHT)),
++ } }
++ },
++ /* Mic in */
++ {
++ .stream = 1,
++ .exclusive = 1,
++ .r = { {
++ .slots = (1<<AC97_SLOT_MIC),
++ } }
++ },
++};
++
++static int __devinit snd_atmel_ac97_pcm_new(atmel_ac97_t *chip)
++{
++ struct snd_pcm *pcm;
++ int err;
++
++ err = snd_ac97_pcm_assign(chip->ac97_bus,
++ ARRAY_SIZE(atmel_ac97_pcm_defs),
++ atmel_ac97_pcm_defs);
++ if (err)
++ return err;
++
++ err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
++ if (err)
++ return err;
++
++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
++ &atmel_ac97_playback_ops);
++
++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
++ &atmel_ac97_capture_ops);
++
++ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
++ &chip->pdev->dev,
++ 128 * 1024, 128 * 1024);
++
++ pcm->private_data = chip;
++ pcm->info_flags = 0;
++ strcpy(pcm->name, "Atmel-AC97");
++ chip->pcm = pcm;
++
++ return 0;
++}
++
++/* Mixer part */
++static int snd_atmel_ac97_mixer_new(atmel_ac97_t *chip)
++{
++ int err;
++ struct snd_ac97_template template;
++
++ memset(&template, 0, sizeof(template));
++ template.private_data = chip;
++ err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
++
++ return err;
++}
++
++static void atmel_ac97_error(struct dma_request *_req)
++{
++ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
++
++ printk(KERN_WARNING
++ "DMA Controller error, channel %d (AC97C)\n",
++ req->req.channel);
++}
++
++static void atmel_ac97_block_complete(struct dma_request *_req)
++{
++ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
++ atmel_ac97_t *chip = req->dev_id;
++ if (req->periph_id == chip->dma.tx_periph_id)
++ snd_pcm_period_elapsed(chip->playback_substream);
++ else
++ snd_pcm_period_elapsed(chip->capture_substream);
++}
++
++/*
++ * Codec part
++ */
++static void snd_atmel_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
++ unsigned short val)
++{
++ atmel_ac97_t *chip = get_chip(ac97);
++ unsigned long word;
++ int timeout = 40;
++
++ word = (reg & 0x7f) << 16 | val;
++
++ do {
++ if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
++ ac97c_writel(chip, COTHR, word);
++ return;
++ }
++ udelay(1);
++ } while (--timeout);
++
++ snd_printk(KERN_WARNING "atmel-ac97: codec write timeout\n");
++}
++
++static unsigned short snd_atmel_ac97_read(struct snd_ac97 *ac97,
++ unsigned short reg)
++{
++ atmel_ac97_t *chip = get_chip(ac97);
++ unsigned long word;
++ int timeout = 40;
++ int write = 10;
++
++ word = (0x80 | (reg & 0x7f)) << 16;
++
++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
++ ac97c_readl(chip, CORHR);
++
++retry_write:
++ timeout = 40;
++
++ do {
++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
++ ac97c_writel(chip, COTHR, word);
++ goto read_reg;
++ }
++ mdelay(10);
++ } while (--timeout);
++
++ if (!--write)
++ goto timed_out;
++ goto retry_write;
++
++read_reg:
++ do {
++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0){
++ unsigned short val = ac97c_readl(chip, CORHR);
++ return val;
++ }
++ mdelay(10);
++ } while (--timeout);
++
++ if (!--write)
++ goto timed_out;
++ goto retry_write;
++
++timed_out:
++ snd_printk(KERN_INFO "atmel-ac97: codec read timeout\n");
++ return 0xffff;
++}
++
++static void snd_atmel_ac97_reset(atmel_ac97_t *chip)
++{
++ /* TODO: Perform hard reset of codec as well */
++ ac97c_writel(chip, MR, AC97C_MR_WRST);
++ mdelay(1);
++ ac97c_writel(chip, MR, AC97C_MR_ENA);
++}
++
++static void snd_atmel_ac97_destroy(struct snd_card *card)
++{
++ atmel_ac97_t *chip = get_chip(card);
++
++ if (chip->regs)
++ iounmap(chip->regs);
++
++ if (chip->mck) {
++ clk_disable(chip->mck);
++ clk_put(chip->mck);
++ }
++
++ if (chip->dma.req_tx.req.dmac){
++ dma_release_channel(chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel);
++ }
++ if (chip->dma.req_rx.req.dmac) {
++ dma_release_channel(chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel);
++ }
++}
++
++static int __devinit snd_atmel_ac97_create(struct snd_card *card,
++ struct platform_device *pdev)
++{
++ static struct snd_ac97_bus_ops ops = {
++ .write = snd_atmel_ac97_write,
++ .read = snd_atmel_ac97_read,
++ };
++ atmel_ac97_t *chip = get_chip(card);
++ struct resource *regs;
++ struct clk *mck;
++ int err;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++
++ mck = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(mck))
++ return PTR_ERR(mck);
++ clk_enable(mck);
++ chip->mck = mck;
++
++ card->private_free = snd_atmel_ac97_destroy;
++
++ spin_lock_init(&chip->lock);
++ chip->card = card;
++ chip->pdev = pdev;
++
++ chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!chip->regs)
++ return -ENOMEM;
++
++ snd_card_set_dev(card, &pdev->dev);
++
++ err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
++
++ return err;
++}
++
++static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
++{
++ static int dev;
++ struct snd_card *card;
++ atmel_ac97_t *chip;
++ int err;
++ int ch;
++
++ mutex_init(&opened_mutex);
++
++ err = -ENOMEM;
++ card = snd_card_new(-1, id, THIS_MODULE, sizeof(atmel_ac97_t));
++ if (!card)
++ goto out;
++ chip = get_chip(card);
++
++ err = snd_atmel_ac97_create(card, pdev);
++ if (err)
++ goto out_free_card;
++
++ snd_atmel_ac97_reset(chip);
++
++ err = snd_atmel_ac97_mixer_new(chip);
++ if (err)
++ goto out_free_card;
++
++ err = snd_atmel_ac97_pcm_new(chip);
++ if (err)
++ goto out_free_card;
++
++ /* TODO: Get this information from the platform device */
++ chip->dma.req_tx.req.dmac = find_dma_controller(0);
++ if (!chip->dma.req_tx.req.dmac) {
++ printk(KERN_ERR
++ "atmel-ac97c: No DMA controller for TX, aborting\n");
++ goto out_free_card;
++ }
++ chip->dma.req_rx.req.dmac = find_dma_controller(0);
++ if (!chip->dma.req_rx.req.dmac) {
++ snd_printk(KERN_ERR
++ "atmel-ac97c: No DMA controller available for RX, aborting\n");
++ goto out_free_card;
++ }
++
++ chip->dma.rx_periph_id = 3;
++ chip->dma.tx_periph_id = 4;
++
++ ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
++ if (ch < 0) {
++ printk(KERN_ERR
++ "atmel-ac97c: Unable to allocate TX DMA channel, aborting\n");
++ goto out_free_card;
++ }
++ chip->dma.req_tx.req.channel = ch;
++ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
++ chip->dma.req_tx.req.error = atmel_ac97_error;
++
++ ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
++ if (ch < 0) {
++ snd_printk(KERN_ERR
++ "atmel-ac97c: Unable to allocate RX DMA channel, aborting\n");
++ goto out_free_card;
++ }
++ chip->dma.req_rx.req.channel = ch;
++ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
++ chip->dma.req_rx.req.error = atmel_ac97_error;
++
++ strcpy(card->driver, "ac97c");
++ strcpy(card->shortname, "Atmel-AC97");
++ sprintf(card->longname, "Atmel AVR32 AC97 Controller at 0x%p, dma rx %i and tx %i",
++ chip->regs, chip->dma.rx_periph_id, chip->dma.tx_periph_id);
++
++ err = snd_card_register(card);
++ if (err)
++ goto out_free_card;
++
++ platform_set_drvdata(pdev, card);
++ dev++;
++ return 0;
++
++out_free_card:
++ snd_card_free(card);
++out:
++ return err;
++}
++
++static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
++{
++ struct snd_card *card = platform_get_drvdata(pdev);
++
++ snd_card_free(card);
++ platform_set_drvdata(pdev, NULL);
++ return 0;
++}
++
++static struct platform_driver atmel_ac97_driver = {
++ .remove = __devexit_p(snd_atmel_ac97_remove),
++ .driver = {
++ .name = "atmel_ac97c",
++ },
++};
++
++static int __init atmel_ac97_init(void)
++{
++ return platform_driver_probe(&atmel_ac97_driver, snd_atmel_ac97_probe);
++}
++
++static void __exit atmel_ac97_exit(void)
++{
++ platform_driver_unregister(&atmel_ac97_driver);
++}
++
++module_init(atmel_ac97_init);
++module_exit(atmel_ac97_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+diff --git a/sound/avr32/ac97c.h b/sound/avr32/ac97c.h
+new file mode 100644
+index 0000000..96246e7
+--- /dev/null
++++ b/sound/avr32/ac97c.h
+@@ -0,0 +1,71 @@
++/*
++ * Register definitions for the Atmel AC97 Controller.
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __SOUND_AVR32_AC97C_H
++#define __SOUND_AVR32_AC97C_H
++
++#define AC97C_MR 0x08
++#define AC97C_ICA 0x10
++#define AC97C_OCA 0x14
++#define AC97C_CARHR 0x20
++#define AC97C_CATHR 0x24
++#define AC97C_CASR 0x28
++#define AC97C_CAMR 0x2c
++#define AC97C_CBRHR 0x30
++#define AC97C_CBTHR 0x34
++#define AC97C_CBSR 0x38
++#define AC97C_CBMR 0x3c
++#define AC97C_CORHR 0x40
++#define AC97C_COTHR 0x44
++#define AC97C_COSR 0x48
++#define AC97C_COMR 0x4c
++#define AC97C_SR 0x50
++#define AC97C_IER 0x54
++#define AC97C_IDR 0x58
++#define AC97C_IMR 0x5c
++#define AC97C_VERSION 0xfc
++
++#define AC97C_CATPR PDC_TPR
++#define AC97C_CATCR PDC_TCR
++#define AC97C_CATNPR PDC_TNPR
++#define AC97C_CATNCR PDC_TNCR
++#define AC97C_CARPR PDC_RPR
++#define AC97C_CARCR PDC_RCR
++#define AC97C_CARNPR PDC_RNPR
++#define AC97C_CARNCR PDC_RNCR
++#define AC97C_PTCR PDC_PTCR
++
++#define AC97C_MR_ENA (1 << 0)
++#define AC97C_MR_WRST (1 << 1)
++#define AC97C_MR_VRA (1 << 2)
++
++#define AC97C_CSR_TXRDY (1 << 0)
++#define AC97C_CSR_UNRUN (1 << 2)
++#define AC97C_CSR_RXRDY (1 << 4)
++#define AC97C_CSR_ENDTX (1 << 10)
++#define AC97C_CSR_ENDRX (1 << 14)
++
++#define AC97C_CMR_SIZE_20 (0 << 16)
++#define AC97C_CMR_SIZE_18 (1 << 16)
++#define AC97C_CMR_SIZE_16 (2 << 16)
++#define AC97C_CMR_SIZE_10 (3 << 16)
++#define AC97C_CMR_CEM_LITTLE (1 << 18)
++#define AC97C_CMR_CEM_BIG (0 << 18)
++#define AC97C_CMR_CENA (1 << 21)
++#define AC97C_CMR_PDCEN (1 << 22)
++
++#define AC97C_SR_CAEVT (1 << 3)
++
++#define AC97C_CH_ASSIGN(slot, channel) \
++ (AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
++#define AC97C_CHANNEL_NONE 0x0
++#define AC97C_CHANNEL_A 0x1
++#define AC97C_CHANNEL_B 0x2
++
++#endif /* __SOUND_AVR32_AC97C_H */
+diff --git a/sound/spi/Kconfig b/sound/spi/Kconfig
+new file mode 100644
+index 0000000..6814353
+--- /dev/null
++++ b/sound/spi/Kconfig
+@@ -0,0 +1,31 @@
++#SPI drivers
++
++menu "SPI devices"
++ depends on SND != n
++
++config SND_AT73C213
++ tristate "Atmel AT73C213 DAC driver"
++ depends on ATMEL_SSC
++ select SND_PCM
++ help
++ Say Y here if you want to use the Atmel AT73C213 DAC. This device can
++ be found on several development boards for AT91 and AVR32.
++
++ This driver requires the Atmel SSC driver for sound sink, a
++ peripheral found on most AT91 and AVR32 microprocessors.
++
++ To compile this driver as a module, choose M here: the
++ module will be called snd-at73c213.
++
++config SND_AT73C213_TARGET_BITRATE
++ int "Target bitrate for AT73C213"
++ depends on SND_AT73C213
++ default "48000"
++ range 8000 50000
++ help
++ Sets the target bitrate for the bitrate calculator in the driver.
++ Limited by hardware to be between 8000 Hz and 50000 Hz.
++
++ Set to 48000 Hz by default.
++
++endmenu
+diff --git a/sound/spi/Makefile b/sound/spi/Makefile
+new file mode 100644
+index 0000000..026fb73
+--- /dev/null
++++ b/sound/spi/Makefile
+@@ -0,0 +1,5 @@
++# Makefile for SPI drivers
++
++snd-at73c213-objs := at73c213.o
++
++obj-$(CONFIG_SND_AT73C213) += snd-at73c213.o
+diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
+new file mode 100644
+index 0000000..f94e417
+--- /dev/null
++++ b/sound/spi/at73c213.c
+@@ -0,0 +1,1123 @@
++/*
++ * Driver for AT73C213 16-bit stereo DAC connected to Atmel SSC
++ *
++ * Copyright (C) 2006 Atmel Norway
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++ * 02111-1307, USA.
++ *
++ * The full GNU General Public License is included in this
++ * distribution in the file called COPYING.
++ */
++
++/*#define DEBUG*/
++
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/kmod.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <sound/initval.h>
++#include <sound/driver.h>
++#include <sound/control.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++
++#include <linux/ssc.h>
++
++#include <linux/spi/spi.h>
++#include <linux/spi/at73c213.h>
++
++#include <asm/io.h>
++#include <asm/processor.h>
++
++#include "at73c213.h"
++
++#define BITRATE_MIN 8000 /* hardware limit? */
++#define BITRATE_TARGET CONFIG_SND_AT73C213_TARGET_BITRATE
++#define BITRATE_MAX 50000 /* hardware limit */
++
++/* initial (hardware reset) AT73C213 register values */
++static unsigned char snd_at73c213_original_image[18] =
++{
++ 0x00, /* 00 - CTRL */
++ 0x05, /* 01 - LLIG */
++ 0x05, /* 02 - RLIG */
++ 0x08, /* 03 - LPMG */
++ 0x08, /* 04 - RPMG */
++ 0x00, /* 05 - LLOG */
++ 0x00, /* 06 - RLOG */
++ 0x22, /* 07 - OLC */
++ 0x09, /* 08 - MC */
++ 0x00, /* 09 - CSFC */
++ 0x00, /* 0A - MISC */
++ 0x00, /* 0B - */
++ 0x00, /* 0C - PRECH */
++ 0x05, /* 0D - AUXG */
++ 0x00, /* 0E - */
++ 0x00, /* 0F - */
++ 0x00, /* 10 - RST */
++ 0x00, /* 11 - PA_CTRL */
++};
++
++/* SSC setup */
++static struct ssc_mode ssc_at73c213 =
++{
++ .mode = ATMEL_SSC_MODE_I2S_MASTER,
++ .data_length = 16,
++};
++
++/* chip-specific data */
++struct snd_at73c213 {
++ struct snd_card *card;
++ struct snd_pcm *pcm;
++ struct snd_pcm_substream *substream;
++ int irq;
++ int period;
++ unsigned long bitrate;
++ struct clk *bitclk;
++ struct clk *dac_clk;
++ struct ssc_device *ssc;
++ struct spi_device *spi;
++ struct at73c213_board_info *info;
++ struct ssc_xfer_info ssc_xfer;
++ u8 spi_wbuffer[2];
++ u8 spi_rbuffer[2];
++ /* image of the SPI registers in AT73C213 */
++ u8 image[18];
++ spinlock_t lock;
++};
++
++#define get_chip(card) ((struct snd_at73c213 *)card->private_data)
++
++static int
++snd_at73c213_write_reg(struct snd_at73c213 *chip, u8 reg, u8 val)
++{
++ struct spi_message msg;
++ struct spi_transfer msg_xfer = {
++ .len = 2,
++ .cs_change = 0,
++ };
++
++ spi_message_init(&msg);
++
++ chip->spi_wbuffer[0] = reg;
++ chip->spi_wbuffer[1] = val;
++
++ msg_xfer.tx_buf = chip->spi_wbuffer;
++ msg_xfer.rx_buf = chip->spi_rbuffer;
++ spi_message_add_tail(&msg_xfer, &msg);
++
++ return spi_sync(chip->spi, &msg);
++}
++
++#define write_reg(_spi, reg, val) \
++ do { \
++ retval = snd_at73c213_write_reg(_spi, reg, val); \
++ if (retval) \
++ goto out; \
++ } while (0)
++
++static struct snd_pcm_hardware snd_at73c213_playback_hw = {
++ .info = SNDRV_PCM_INFO_INTERLEAVED |
++ SNDRV_PCM_INFO_BLOCK_TRANSFER,
++ .formats = SNDRV_PCM_FMTBIT_S16_BE,
++ .rates = SNDRV_PCM_RATE_CONTINUOUS,
++ .rate_min = 8000, /* overwritten by chip->bitrate */
++ .rate_max = 50000, /* overwritten by chip->bitrate */
++ .channels_min = 2,
++ .channels_max = 2,
++ .buffer_bytes_max = 64 * 1024 - 1,
++ .period_bytes_min = 512,
++ .period_bytes_max = 64 * 1024 - 1,
++ .periods_min = 4,
++ .periods_max = 1024,
++};
++
++/*
++ * calculate and set bitrate and divisions
++ */
++static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip)
++{
++ unsigned long ssc_rate = ssc_clk_get_rate(chip->ssc);
++ unsigned long dac_rate_new, ssc_div, status;
++ unsigned long ssc_div_max, ssc_div_min;
++ int max_tries, retval;
++
++ /* We connect two clocks here, picking divisors so the I2S clocks
++ * out data at the same rate the DAC clocks it in ... and as close
++ * as practical to the desired target rate.
++ *
++ * The DAC master clock (MCLK) is programmable, and is either 256
++ * or (not here) 384 times the I2S output clock (BCLK).
++ */
++
++ /* SSC clock / (bitrate * stereo * 16-bit) */
++ ssc_div = ssc_rate / (BITRATE_TARGET * 2 * 16);
++ ssc_div_min = ssc_rate / (BITRATE_MAX * 2 * 16);
++ ssc_div_max = ssc_rate / (BITRATE_MIN * 2 * 16);
++ max_tries = (ssc_div_max - ssc_div_min) / 2;
++
++ if ((ssc_div % 2) != 0)
++ ssc_div++;
++ if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) {
++ ssc_div -= 2;
++ if ((ssc_rate / (ssc_div * 2 * 16)) > BITRATE_MAX) {
++ return -ENXIO;
++ }
++ }
++
++ /* search for a possible bitrate */
++ do {
++ /* SSC clock / (ssc divider * 16-bit * stereo) */
++ if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN)
++ return -ENXIO;
++
++ dac_rate_new = 8 * (ssc_rate / ssc_div); /* 256 / (2 * 16) = 8 */
++
++ status = clk_round_rate(chip->dac_clk, dac_rate_new);
++ if (status < 0)
++ return status;
++
++ /* ignore difference smaller than 256 Hz */
++ if ((status/256) == (dac_rate_new/256))
++ goto set_rate;
++
++ ssc_div += 2;
++ } while (--max_tries);
++
++ /* not able to find a bitrate */
++ return -ENXIO;
++
++set_rate:
++ status = clk_set_rate(chip->dac_clk, status);
++ if (status < 0)
++ return status;
++
++ ssc_at73c213.bauddiv = ssc_div;
++ retval = ssc_set_mode(chip->ssc, &ssc_at73c213);
++ if (retval)
++ return retval;
++
++ /* SSC clock / (ssc divider * 16-bit * stereo) */
++ chip->bitrate = ssc_rate / (ssc_div * 16 * 2);
++
++ printk(KERN_INFO "at73c213: supported bitrate is %lu (%lu divider)\n",
++ chip->bitrate, ssc_div);
++
++ return 0;
++}
++
++/* open callback */
++static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++
++ snd_at73c213_playback_hw.rate_min = chip->bitrate;
++ snd_at73c213_playback_hw.rate_max = chip->bitrate;
++ runtime->hw = snd_at73c213_playback_hw;
++ chip->substream = substream;
++
++ return 0;
++}
++
++/* close callback */
++static int snd_at73c213_pcm_close(struct snd_pcm_substream *substream)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ chip->substream = NULL;
++ return 0;
++}
++
++/* hw_params callback */
++static int snd_at73c213_pcm_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *hw_params)
++{
++ return snd_pcm_lib_malloc_pages(substream,
++ params_buffer_bytes(hw_params));
++}
++
++/* hw_free callback */
++static int snd_at73c213_pcm_hw_free(struct snd_pcm_substream *substream)
++{
++ return snd_pcm_lib_free_pages(substream);
++}
++
++/* prepare callback */
++static int snd_at73c213_pcm_prepare(struct snd_pcm_substream *substream)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ int block_size;
++
++ block_size = frames_to_bytes(runtime, runtime->period_size);
++
++ chip->period = 0;
++
++ /* Make sure that our data are actually readable by the SSC */
++ dma_sync_single_for_device(&chip->spi->dev,
++ (long)runtime->dma_area,
++ block_size, DMA_TO_DEVICE);
++ dma_sync_single_for_device(&chip->spi->dev,
++ (long)runtime->dma_area + block_size,
++ block_size, DMA_TO_DEVICE);
++
++ chip->ssc_xfer.data = (long)runtime->dma_area;
++ chip->ssc_xfer.data &= ~0xe0000000;
++ chip->ssc_xfer.len = runtime->period_size * 2;
++ chip->ssc_xfer.next_data = (long)runtime->dma_area + block_size;
++ chip->ssc_xfer.next_data &= ~0xe0000000;
++ chip->ssc_xfer.next_len = runtime->period_size * 2;
++ ssc_set_tx_buffers(chip->ssc, &chip->ssc_xfer);
++
++ return 0;
++}
++
++/* trigger callback */
++static int snd_at73c213_pcm_trigger(struct snd_pcm_substream *substream,
++ int cmd)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ int retval = 0;
++ unsigned long flags = 0;
++
++ spin_lock_irqsave(&chip->lock, flags);
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ ssc_enable_int(chip->ssc, SSC_BIT(IER_ENDTX));
++ ssc_enable_xfer(chip->ssc, 1, 0);
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ ssc_disable_xfer(chip->ssc, 1, 0);
++ ssc_disable_int(chip->ssc, SSC_BIT(IDR_ENDTX));
++ break;
++ default:
++ printk(KERN_WARNING "at73c213: spurious command %x\n", cmd);
++ retval = -EINVAL;
++ break;
++ }
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++
++ return retval;
++}
++
++/* pointer callback */
++static snd_pcm_uframes_t snd_at73c213_pcm_pointer(struct snd_pcm_substream *substream)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ snd_pcm_uframes_t pos;
++ unsigned long bytes;
++
++ ssc_get_tx_buffers(chip->ssc, &chip->ssc_xfer);
++ bytes = chip->ssc_xfer.data - (unsigned long)runtime->dma_area;
++
++ pos = bytes_to_frames(runtime, bytes);
++ if (pos >= runtime->buffer_size)
++ pos -= runtime->buffer_size;
++
++ return pos;
++}
++
++/* operators */
++static struct snd_pcm_ops at73c213_playback_ops = {
++ .open = snd_at73c213_pcm_open,
++ .close = snd_at73c213_pcm_close,
++ .ioctl = snd_pcm_lib_ioctl,
++ .hw_params = snd_at73c213_pcm_hw_params,
++ .hw_free = snd_at73c213_pcm_hw_free,
++ .prepare = snd_at73c213_pcm_prepare,
++ .trigger = snd_at73c213_pcm_trigger,
++ .pointer = snd_at73c213_pcm_pointer,
++};
++
++/* free a pcm device */
++static void snd_at73c213_pcm_free(struct snd_pcm *pcm)
++{
++ struct snd_at73c213 *chip = snd_pcm_chip(pcm);
++ if (chip->pcm) {
++ snd_pcm_lib_preallocate_free_for_all(chip->pcm);
++ chip->pcm = NULL;
++ }
++}
++
++/* create a new pcm device */
++static int __devinit snd_at73c213_pcm_new(struct snd_at73c213 *chip, int device)
++{
++ struct snd_pcm *pcm;
++ int retval;
++
++ retval = snd_pcm_new(chip->card, chip->card->shortname, device, 1, 0, &pcm);
++ if (retval < 0)
++ return retval;
++
++ pcm->private_data = chip;
++ pcm->private_free = snd_at73c213_pcm_free;
++ pcm->info_flags = SNDRV_PCM_INFO_BLOCK_TRANSFER;
++ strcpy(pcm->name, "at73c213");
++ chip->pcm = pcm;
++
++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &at73c213_playback_ops);
++
++ /* TODO: why can I not use SNDRV_DMA_TYPE_DEV? */
++ retval = snd_pcm_lib_preallocate_pages_for_all(chip->pcm,
++ SNDRV_DMA_TYPE_CONTINUOUS,
++ snd_dma_continuous_data(GFP_KERNEL),
++ 64 * 1024, 64 * 1024);
++ return 0;
++}
++
++static irqreturn_t snd_at73c213_interrupt(int irq, void *dev_id)
++{
++ struct snd_at73c213 *chip = dev_id;
++ struct snd_pcm_runtime *runtime = chip->substream->runtime;
++ u32 status;
++ int offset, next_period, block_size, mask, retval;
++
++ spin_lock(&chip->lock);
++
++ block_size = frames_to_bytes(runtime, runtime->period_size);
++
++ retval = ssc_get_int_mask(chip->ssc, &status);
++ if (retval)
++ return retval;
++
++ if (status & SSC_BIT(IMR_ENDTX)) {
++ chip->period++;
++ if (chip->period == runtime->periods)
++ chip->period = 0;
++ next_period = chip->period + 1;
++ if (next_period == runtime->periods)
++ next_period = 0;
++
++ offset = block_size * next_period;
++
++ /* make sure that our data are actually readable by the SSC */
++ dma_sync_single_for_device(&chip->spi->dev,
++ (long)runtime->dma_area + offset,
++ block_size, DMA_TO_DEVICE);
++ chip->ssc_xfer.data = 0; /* only update next pointer */
++ chip->ssc_xfer.next_data = (long)runtime->dma_area + offset;
++ chip->ssc_xfer.next_data &= ~0xe0000000;
++ chip->ssc_xfer.next_len = runtime->period_size * 2;
++ ssc_set_tx_buffers(chip->ssc, &chip->ssc_xfer);
++ } else {
++ printk(KERN_WARNING
++ "Spurious SSC interrupt, status = 0x%08lx\n",
++ (unsigned long)status);
++ ssc_disable_int(chip->ssc, status);
++ }
++
++ ssc_get_int_mask(chip->ssc, &mask);
++ spin_unlock(&chip->lock);
++
++ if (status & SSC_BIT(IMR_ENDTX))
++ snd_pcm_period_elapsed(chip->substream);
++
++ return IRQ_HANDLED;
++}
++
++/*
++ * Mixer functions
++ */
++#if 0 /* Function not in use */
++static int snd_at73c213_mono_info(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ unsigned long mask = (kcontrol->private_value >> 16) & 0xff;
++
++ uinfo->type = (mask == 1) ?
++ SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER;
++ uinfo->count = 1;
++ uinfo->value.integer.min = 0;
++ uinfo->value.integer.max = mask;
++
++ return 0;
++}
++#endif
++
++static int snd_at73c213_mono_get(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ unsigned long flags;
++ int reg = kcontrol->private_value & 0xff;
++ int shift = (kcontrol->private_value >> 8) & 0xff;
++ int mask = (kcontrol->private_value >> 16) & 0xff;
++ int invert = (kcontrol->private_value >> 24) & 0xff;
++
++ spin_lock_irqsave(&chip->lock, flags);
++
++ ucontrol->value.integer.value[0] = (chip->image[reg] >> shift) & mask;
++
++ if (invert)
++ ucontrol->value.integer.value[0] =
++ (mask - ucontrol->value.integer.value[0]);
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++
++ return 0;
++}
++
++static int snd_at73c213_mono_put(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ unsigned long flags;
++ int reg = kcontrol->private_value & 0xff;
++ int shift = (kcontrol->private_value >> 8) & 0xff;
++ int mask = (kcontrol->private_value >> 16) & 0xff;
++ int invert = (kcontrol->private_value >> 24) & 0xff;
++ int change, retval;
++ unsigned short val;
++
++ val = (ucontrol->value.integer.value[0] & mask);
++ if (invert)
++ val = mask - val;
++ val <<= shift;
++
++ spin_lock_irqsave(&chip->lock, flags);
++
++ val = (chip->image[reg] & ~(mask << shift)) | val;
++ change = val != chip->image[reg];
++ write_reg(chip, reg, val);
++
++ chip->image[reg] = val;
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++
++ return change;
++
++out:
++ return retval;
++}
++
++static int snd_at73c213_stereo_info(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ int mask = (kcontrol->private_value >> 24) & 0xFF;
++
++ uinfo->type = mask == 1 ?
++ SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER;
++ uinfo->count = 2;
++ uinfo->value.integer.min = 0;
++ uinfo->value.integer.max = mask;
++
++ return 0;
++}
++
++static int snd_at73c213_stereo_get(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ unsigned long flags;
++ int left_reg = kcontrol->private_value & 0xff;
++ int right_reg = (kcontrol->private_value >> 8) & 0xff;
++ int shift_left = (kcontrol->private_value >> 16) & 0x07;
++ int shift_right = (kcontrol->private_value >> 19) & 0x07;
++ int mask = (kcontrol->private_value >> 24) & 0xff;
++ int invert = (kcontrol->private_value >> 22) & 1;
++
++ spin_lock_irqsave(&chip->lock, flags);
++
++ ucontrol->value.integer.value[0] =
++ (chip->image[left_reg] >> shift_left) & mask;
++ ucontrol->value.integer.value[1] =
++ (chip->image[right_reg] >> shift_right) & mask;
++
++ if (invert) {
++ ucontrol->value.integer.value[0] =
++ (mask - ucontrol->value.integer.value[0]);
++ ucontrol->value.integer.value[1] =
++ (mask - ucontrol->value.integer.value[1]);
++ }
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++
++ return 0;
++}
++
++static int snd_at73c213_stereo_put(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ unsigned long flags;
++ int left_reg = kcontrol->private_value & 0xff;
++ int right_reg = (kcontrol->private_value >> 8) & 0xff;
++ int shift_left = (kcontrol->private_value >> 16) & 0x07;
++ int shift_right = (kcontrol->private_value >> 19) & 0x07;
++ int mask = (kcontrol->private_value >> 24) & 0xff;
++ int invert = (kcontrol->private_value >> 22) & 1;
++ int change, retval;
++ unsigned short val1, val2;
++
++ val1 = ucontrol->value.integer.value[0] & mask;
++ val2 = ucontrol->value.integer.value[1] & mask;
++ if (invert) {
++ val1 = mask - val1;
++ val2 = mask - val2;
++ }
++ val1 <<= shift_left;
++ val2 <<= shift_right;
++
++ spin_lock_irqsave(&chip->lock, flags);
++
++ val1 = (chip->image[left_reg] & ~(mask << shift_left)) | val1;
++ val2 = (chip->image[right_reg] & ~(mask << shift_right)) | val2;
++ change = val1 != chip->image[left_reg] || val2 != chip->image[right_reg];
++ write_reg(chip, left_reg, val1);
++ write_reg(chip, right_reg, val2);
++
++ chip->image[left_reg] = val1;
++ chip->image[right_reg] = val2;
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++
++ return change;
++
++out:
++ return retval;
++}
++
++static int snd_at73c213_mono_switch_info(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
++ uinfo->count = 1;
++ uinfo->value.integer.min = 0;
++ uinfo->value.integer.max = 1;
++
++ return 0;
++}
++
++static int snd_at73c213_mono_switch_get(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ unsigned long flags;
++ int reg = kcontrol->private_value & 0xff;
++ int shift = (kcontrol->private_value >> 8) & 0xff;
++ int invert = (kcontrol->private_value >> 24) & 0xff;
++
++ spin_lock_irqsave(&chip->lock, flags);
++
++ ucontrol->value.integer.value[0] = (chip->image[reg] >> shift) & 0x01;
++
++ if (invert)
++ ucontrol->value.integer.value[0] =
++ (0x01 - ucontrol->value.integer.value[0]);
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++
++ return 0;
++}
++
++static int snd_at73c213_mono_switch_put(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ unsigned long flags;
++ int reg = kcontrol->private_value & 0xff;
++ int shift = (kcontrol->private_value >> 8) & 0xff;
++ int mask = (kcontrol->private_value >> 16) & 0xff;
++ int invert = (kcontrol->private_value >> 24) & 0xff;
++ int change, retval;
++ unsigned short val;
++
++ if (ucontrol->value.integer.value[0])
++ val = mask;
++ else
++ val = 0;
++
++ if (invert)
++ val = mask - val;
++ val <<= shift;
++
++ spin_lock_irqsave(&chip->lock, flags);
++
++ val |= (chip->image[reg] & ~(mask << shift));
++ change = val != chip->image[reg];
++
++ write_reg(chip, reg, val);
++
++ chip->image[reg] = val;
++
++ spin_unlock_irqrestore(&chip->lock, flags);
++
++ return change;
++
++out:
++ return retval;
++}
++
++static int snd_at73c213_pa_volume_info(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++ uinfo->count = 1;
++ uinfo->value.integer.min = 0;
++ uinfo->value.integer.max = ((kcontrol->private_value >> 16) & 0xFF) - 1;
++
++ return 0;
++}
++
++static int snd_at73c213_line_capture_volume_info(
++ struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++ uinfo->count = 2;
++ uinfo->value.integer.min = 14;
++ uinfo->value.integer.max = 31;
++
++ return 0;
++}
++
++static int snd_at73c213_aux_capture_volume_info(
++ struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++ uinfo->count = 1;
++ uinfo->value.integer.min = 14;
++ uinfo->value.integer.max = 31;
++
++ return 0;
++}
++
++#define AT73C213_MONO(xname, xindex, reg, shift, mask, invert) \
++{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
++ .info = snd_at73c213_mono_info, \
++ .get = snd_at73c213_mono_get, .put = snd_at73c213_mono_put, \
++ .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) }
++
++#define AT73C213_MONO_SWITCH(xname, xindex, reg, shift, mask, invert) \
++{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
++ .info = snd_at73c213_mono_switch_info, \
++ .get = snd_at73c213_mono_switch_get, .put = snd_at73c213_mono_switch_put, \
++ .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) }
++
++#define AT73C213_STEREO(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
++{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
++ .info = snd_at73c213_stereo_info, \
++ .get = snd_at73c213_stereo_get, .put = snd_at73c213_stereo_put, \
++ .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | (shift_right << 19) | (mask << 24) | (invert << 22) }
++
++static struct snd_kcontrol_new snd_at73c213_controls[] __devinitdata = {
++AT73C213_STEREO("Master Playback Volume", 0, DAC_LMPG, DAC_RMPG, 0, 0, 0x1F, 1),
++AT73C213_STEREO("Master Playback Switch", 0, DAC_LMPG, DAC_RMPG, 5, 5, 1, 1),
++AT73C213_STEREO("PCM Playback Volume", 0, DAC_LLOG, DAC_RLOG, 0, 0, 0x1F, 1),
++AT73C213_STEREO("PCM Playback Switch", 0, DAC_LLOG, DAC_RLOG, 5, 5, 1, 1),
++AT73C213_MONO_SWITCH("Mono PA Playback Switch", 0, DAC_CTRL, DAC_CTRL_ONPADRV, 0x01, 0),
++{
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++ .name = "PA Playback Volume",
++ .index = 0,
++ .info = snd_at73c213_pa_volume_info,
++ .get = snd_at73c213_mono_get,
++ .put = snd_at73c213_mono_put,
++ .private_value = PA_CTRL|(PA_CTRL_APAGAIN<<8)|(0x0F<<16)|(1<<24),
++},
++AT73C213_MONO_SWITCH("PA High Gain Playback Switch", 0, PA_CTRL, PA_CTRL_APALP, 0x01, 1),
++AT73C213_MONO_SWITCH("PA Playback Switch", 0, PA_CTRL, PA_CTRL_APAON, 0x01, 0),
++{
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++ .name = "Aux Capture Volume",
++ .index = 0,
++ .info = snd_at73c213_aux_capture_volume_info,
++ .get = snd_at73c213_mono_get,
++ .put = snd_at73c213_mono_put,
++ .private_value = DAC_AUXG|(0<<8)|(0x1F<<16)|(1<<24),
++},
++AT73C213_MONO_SWITCH("Aux Capture Switch", 0, DAC_CTRL, DAC_CTRL_ONAUXIN, 0x01, 0),
++{
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++ .name = "Line Capture Volume",
++ .index = 0,
++ .info = snd_at73c213_line_capture_volume_info,
++ .get = snd_at73c213_stereo_get,
++ .put = snd_at73c213_stereo_put,
++ .private_value = DAC_LLIG|(DAC_RLIG<<8)|(0<<16)|(0<<19)|(0x1F<<24)|(1<<22),
++},
++AT73C213_MONO_SWITCH("Line Capture Switch", 0, DAC_CTRL, 0, 0x03, 0),
++};
++
++static int __devinit snd_at73c213_mixer(struct snd_at73c213 *chip)
++{
++ struct snd_card *card;
++ int errval, idx;
++
++ if (chip == NULL || chip->pcm == NULL)
++ return -EINVAL;
++
++ card = chip->card;
++
++ strcpy(card->mixername, chip->pcm->name);
++
++ for (idx = 0; idx < ARRAY_SIZE(snd_at73c213_controls); idx++) {
++ if ((errval = snd_ctl_add(card,
++ snd_ctl_new1(&snd_at73c213_controls[idx],
++ chip))) < 0) {
++ goto cleanup;
++ }
++ }
++
++ return 0;
++
++cleanup:
++ for (idx = 1; idx < ARRAY_SIZE(snd_at73c213_controls) + 1; idx++) {
++ struct snd_kcontrol *kctl;
++ kctl = snd_ctl_find_numid(card, idx);
++ if (kctl)
++ snd_ctl_remove(card, kctl);
++ }
++ return errval;
++}
++
++/*
++ * Device functions
++ */
++static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
++{
++ int retval;
++ unsigned char dac_ctrl = 0;
++
++ retval = snd_at73c213_set_bitrate(chip);
++ if (retval)
++ goto out;
++
++ /* enable DAC master clock */
++ clk_enable(chip->dac_clk);
++
++ /* initialize at73c213 on SPI bus */
++ write_reg(chip, DAC_RST, 0x04);
++ msleep(1);
++ write_reg(chip, DAC_RST, 0x03);
++
++ /* precharge everything */
++ write_reg(chip, DAC_PRECH, 0xFF);
++ write_reg(chip, PA_CTRL, (1<<PA_CTRL_APAPRECH));
++ write_reg(chip, DAC_CTRL, (1<<DAC_CTRL_ONLNOL)|(1<<DAC_CTRL_ONLNOR));
++
++ msleep(50);
++
++ /* stop precharging PA */
++ write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0F);
++ chip->image[PA_CTRL] = (1<<PA_CTRL_APALP)|0x0F;
++
++ msleep(450);
++
++ /* stop precharging DAC, turn on master power */
++ write_reg(chip, DAC_PRECH, (1<<DAC_PRECH_ONMSTR));
++ chip->image[DAC_PRECH] = (1<<DAC_PRECH_ONMSTR);
++
++ msleep(1);
++
++ /* turn on DAC */
++ dac_ctrl = (1<<DAC_CTRL_ONDACL)|(1<<DAC_CTRL_ONDACR)|
++ (1<<DAC_CTRL_ONLNOL)|(1<<DAC_CTRL_ONLNOR);
++
++ write_reg(chip, DAC_CTRL, dac_ctrl);
++ chip->image[DAC_CTRL] = dac_ctrl;
++
++ /* mute sound */
++ write_reg(chip, DAC_LMPG, 0x3F);
++ chip->image[DAC_LMPG] = 0x3F;
++ write_reg(chip, DAC_RMPG, 0x3F);
++ chip->image[DAC_RMPG] = 0x3F;
++ write_reg(chip, DAC_LLOG, 0x3F);
++ chip->image[DAC_LLOG] = 0x3F;
++ write_reg(chip, DAC_RLOG, 0x3F);
++ chip->image[DAC_RLOG] = 0x3F;
++ write_reg(chip, DAC_LLIG, 0x11);
++ chip->image[DAC_LLIG] = 0x11;
++ write_reg(chip, DAC_RLIG, 0x11);
++ chip->image[DAC_RLIG] = 0x11;
++ write_reg(chip, DAC_AUXG, 0x11);
++ chip->image[DAC_AUXG] = 0x11;
++
++ /* enable I2S clock */
++ retval = ssc_enable(chip->ssc, 1, 0);
++out:
++ return retval;
++}
++
++static int snd_at73c213_dev_free(struct snd_device *device)
++{
++ struct snd_at73c213 *chip = device->device_data;
++
++ ssc_disable(chip->ssc, 1, 0);
++ if (chip->irq >= 0) {
++ free_irq(chip->irq, chip);
++ chip->irq = -1;
++ }
++ ssc_free(chip->ssc);
++
++ return 0;
++}
++
++static int __devinit snd_at73c213_init(struct snd_card *card,
++ struct spi_device *spi)
++{
++ static struct snd_device_ops ops = {
++ .dev_free = snd_at73c213_dev_free,
++ };
++ struct snd_at73c213 *chip = get_chip(card);
++ int irq, retval;
++
++ irq = ssc_to_irq(chip->ssc);
++ if (irq < 0)
++ return irq;
++
++ spin_lock_init(&chip->lock);
++ chip->card = card;
++ chip->irq = -1;
++
++ retval = -ENOMEM;
++
++ retval = spi_setup(chip->spi);
++ if (retval)
++ goto cleanup;
++
++ retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip);
++ if (retval) {
++ snd_printk("unable to request irq %d\n", irq);
++ goto cleanup;
++ }
++ chip->irq = irq;
++
++ memcpy(&chip->image, &snd_at73c213_original_image,
++ sizeof(snd_at73c213_original_image));
++
++ retval = snd_at73c213_chip_init(chip);
++ if (retval)
++ goto cleanup;
++
++ retval = snd_at73c213_pcm_new(chip, 0);
++ if (retval)
++ goto cleanup;
++
++ retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
++ if (retval)
++ goto cleanup;
++
++ retval = snd_at73c213_mixer(chip);
++ if (retval)
++ goto cleanup;
++
++ snd_card_set_dev(card, &spi->dev);
++
++ return retval;
++
++cleanup:
++ if (!list_empty(&card->devices))
++ snd_device_free(card, chip);
++ if (chip->pcm)
++ dev_dbg(&spi->dev, "FIXME: howto free pcm?\n");
++ if (chip->irq >= 0) {
++ free_irq(chip->irq, chip);
++ chip->irq = -1;
++ }
++ return retval;
++}
++
++static int snd_at73c213_probe(struct spi_device *spi)
++{
++ struct at73c213_board_info *info;
++ struct clk *dac_clk;
++ struct snd_card *card;
++ struct snd_at73c213 *chip;
++ int retval;
++ char id[16];
++
++ info = spi->dev.platform_data;
++ if (!info) {
++ dev_dbg(&spi->dev, "no platform_data\n");
++ return -ENXIO;
++ }
++
++ dac_clk = clk_get(NULL, info->dac_clk);
++ if (IS_ERR(dac_clk)) {
++ dev_dbg(&spi->dev, "unable to get DAC clk '%s'\n",
++ info->dac_clk);
++ return (PTR_ERR(dac_clk));
++ }
++
++ retval = -ENOMEM;
++
++ /* allocate "card" using some unused identifiers */
++ snprintf(id, sizeof id, "at73c213_%d", info->i2s_dev);
++ card = snd_card_new(-1, id, THIS_MODULE, sizeof(struct snd_at73c213));
++ if (!card)
++ goto cleanup_card;
++
++ chip = card->private_data;
++ chip->spi = spi;
++ chip->info = info;
++ chip->dac_clk = dac_clk;
++
++ chip->ssc = ssc_request(info->i2s_dev);
++ if (IS_ERR(chip->ssc)) {
++ dev_dbg(&spi->dev, "could not get ssc%d device\n",
++ info->i2s_dev);
++ retval = (PTR_ERR(chip->ssc));
++ goto cleanup;
++ }
++
++ retval = snd_at73c213_init(card, spi);
++ if (retval)
++ goto cleanup;
++
++ strcpy(card->driver, "at73c213");
++ strcpy(card->shortname, info->shortname);
++ sprintf(card->longname, "%s on irq %d", card->shortname, chip->irq);
++
++ retval = snd_card_register(card);
++ if (retval)
++ goto cleanup;
++
++ dev_set_drvdata(&spi->dev, card);
++ return 0;
++
++cleanup:
++ if (IS_ERR(chip->ssc))
++ ssc_free(chip->ssc);
++ if (card)
++ snd_card_free(card);
++cleanup_card:
++ if (dac_clk)
++ clk_put(dac_clk);
++ return retval;
++}
++
++static int __devexit snd_at73c213_remove(struct spi_device *spi)
++{
++ struct snd_card *card = dev_get_drvdata(&spi->dev);
++ struct snd_at73c213 *chip = card->private_data;
++ int retval;
++
++ /* Stop playback */
++ ssc_disable(chip->ssc, 1, 0);
++
++ /* Mute sound */
++ write_reg(chip, DAC_LMPG, 0x3F);
++ chip->image[DAC_LMPG] = 0x3F;
++ write_reg(chip, DAC_RMPG, 0x3F);
++ chip->image[DAC_RMPG] = 0x3F;
++ write_reg(chip, DAC_LLOG, 0x3F);
++ chip->image[DAC_LLOG] = 0x3F;
++ write_reg(chip, DAC_RLOG, 0x3F);
++ chip->image[DAC_RLOG] = 0x3F;
++ write_reg(chip, DAC_LLIG, 0x11);
++ chip->image[DAC_LLIG] = 0x11;
++ write_reg(chip, DAC_RLIG, 0x11);
++ chip->image[DAC_RLIG] = 0x11;
++ write_reg(chip, DAC_AUXG, 0x11);
++ chip->image[DAC_AUXG] = 0x11;
++
++ /* Turn off PA */
++ write_reg(chip, PA_CTRL, (chip->image[PA_CTRL]|0x0F));
++ chip->image[PA_CTRL] |= 0x0F;
++ msleep(10);
++ write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0F);
++ chip->image[PA_CTRL] = (1<<PA_CTRL_APALP)|0x0F;
++
++ /* Turn off external DAC */
++ write_reg(chip, DAC_CTRL, 0x0C);
++ chip->image[DAC_CTRL] = 0x0C;
++ msleep(2);
++ write_reg(chip, DAC_CTRL, 0x00);
++ chip->image[DAC_CTRL] = 0x00;
++
++ /* Turn off master power */
++ write_reg(chip, DAC_PRECH, 0x00);
++ chip->image[DAC_PRECH] = 0x00;
++
++ /* Stop DAC master clock */
++ if (chip->dac_clk) {
++ clk_disable(chip->dac_clk);
++ clk_put(chip->dac_clk);
++ }
++
++out:
++ if (card) {
++ snd_card_free(card);
++ dev_set_drvdata(&spi->dev, NULL);
++ }
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++static int snd_at73c213_suspend(struct spi_device *spi, pm_message_t msg)
++{
++ struct snd_card *card = dev_get_drvdata(&spi->dev);
++ struct snd_at73c213 *chip = card->private_data;
++
++ ssc_disable(chip->ssc, 1, 0);
++ clk_disable(chip->dac_clk);
++
++ return 0;
++}
++
++static int snd_at73c213_resume(struct spi_device *spi)
++{
++ struct snd_card *card = dev_get_drvdata(&spi->dev);
++ struct snd_at73c213 *chip = card->private_data;
++
++ clk_enable(chip->dac_clk);
++ ssc_enable(chip->ssc, 1, 0);
++
++ return 0;
++}
++#endif /* CONFIG_PM */
++
++/* Driver core initialization */
++static struct spi_driver at73c213_driver = {
++ .driver = {
++ .name = "at73c213",
++ },
++ .probe = snd_at73c213_probe,
++#ifdef CONFIG_PM
++ .suspend = snd_at73c213_suspend,
++ .resume = snd_at73c213_resume,
++#endif
++ .remove = __devexit_p(snd_at73c213_remove),
++};
++
++static int __init at73c213_init(void)
++{
++ return spi_register_driver(&at73c213_driver);
++}
++module_init(at73c213_init);
++
++static void __exit at73c213_exit(void)
++{
++ spi_unregister_driver(&at73c213_driver);
++}
++module_exit(at73c213_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("Sound driver for AT73C213 with Atmel SSC");
++MODULE_LICENSE("GPL");
+diff --git a/sound/spi/at73c213.h b/sound/spi/at73c213.h
+new file mode 100644
+index 0000000..fd8b372
+--- /dev/null
++++ b/sound/spi/at73c213.h
+@@ -0,0 +1,119 @@
++/*
++ * Driver for the AT73C213 16-bit stereo DAC on Atmel ATSTK1000
++ *
++ * Copyright (C) 2006 - 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++ * 02111-1307, USA.
++ *
++ * The full GNU General Public License is included in this
++ * distribution in the file called COPYING.
++ */
++
++#ifndef _SND_AT73C213_H
++#define _SND_AT73C213_H
++
++/* DAC control register */
++#define DAC_CTRL 0x00
++#define DAC_CTRL_ONPADRV 7
++#define DAC_CTRL_ONAUXIN 6
++#define DAC_CTRL_ONDACR 5
++#define DAC_CTRL_ONDACL 4
++#define DAC_CTRL_ONLNOR 3
++#define DAC_CTRL_ONLNOL 2
++#define DAC_CTRL_ONLNIR 1
++#define DAC_CTRL_ONLNIL 0
++
++/* DAC left line in gain register */
++#define DAC_LLIG 0x01
++#define DAC_LLIG_LLIG 0
++
++/* DAC right line in gain register */
++#define DAC_RLIG 0x02
++#define DAC_RLIG_RLIG 0
++
++/* DAC Left Master Playback Gain Register */
++#define DAC_LMPG 0x03
++#define DAC_LMPG_LMPG 0
++
++/* DAC Right Master Playback Gain Register */
++#define DAC_RMPG 0x04
++#define DAC_RMPG_RMPG 0
++
++/* DAC Left Line Out Gain Register */
++#define DAC_LLOG 0x05
++#define DAC_LLOG_LLOG 0
++
++/* DAC Right Line Out Gain Register */
++#define DAC_RLOG 0x06
++#define DAC_RLOG_RLOG 0
++
++/* DAC Output Level Control Register */
++#define DAC_OLC 0x07
++#define DAC_OLC_RSHORT 7
++#define DAC_OLC_ROLC 4
++#define DAC_OLC_LSHORT 3
++#define DAC_OLC_LOLC 0
++
++/* DAC Mixer Control Register */
++#define DAC_MC 0x08
++#define DAC_MC_INVR 5
++#define DAC_MC_INVL 4
++#define DAC_MC_RMSMIN2 3
++#define DAC_MC_RMSMIN1 2
++#define DAC_MC_LMSMIN2 1
++#define DAC_MC_LMSMIN1 0
++
++/* DAC Clock and Sampling Frequency Control Register */
++#define DAC_CSFC 0x09
++#define DAC_CSFC_OVRSEL 4
++
++/* DAC Miscellaneous Register */
++#define DAC_MISC 0x0A
++#define DAC_MISC_VCMCAPSEL 7
++#define DAC_MISC_DINTSEL 4
++#define DAC_MISC_DITHEN 3
++#define DAC_MISC_DEEMPEN 2
++#define DAC_MISC_NBITS 0
++
++/* DAC Precharge Control Register */
++#define DAC_PRECH 0x0C
++#define DAC_PRECH_PRCHGPDRV 7
++#define DAC_PRECH_PRCHGAUX1 6
++#define DAC_PRECH_PRCHGLNOR 5
++#define DAC_PRECH_PRCHGLNOL 4
++#define DAC_PRECH_PRCHGLNIR 3
++#define DAC_PRECH_PRCHGLNIL 2
++#define DAC_PRECH_PRCHG 1
++#define DAC_PRECH_ONMSTR 0
++
++/* DAC Auxiliary Input Gain Control Register */
++#define DAC_AUXG 0x0D
++#define DAC_AUXG_AUXG 0
++
++/* DAC Reset Register */
++#define DAC_RST 0x10
++#define DAC_RST_RESMASK 2
++#define DAC_RST_RESFILZ 1
++#define DAC_RST_RSTZ 0
++
++/* Power Amplifier Control Register */
++#define PA_CTRL 0x11
++#define PA_CTRL_APAON 6
++#define PA_CTRL_APAPRECH 5
++#define PA_CTRL_APALP 4
++#define PA_CTRL_APAGAIN 0
++
++#endif /* _SND_AT73C213_H */