summaryrefslogtreecommitdiff
path: root/target/device
AgeCommit message (Collapse)Author
2010-12-17xtensa: remove unused and useless skeleton patchThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-16Remove the few remaining unused Atmel-specific bitsThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-16board: remove Valka v100sc2Thomas Petazzoni
This default configuration did not even build a kernel image, which is the main point of having board default configuration. So remove it. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-16board: remove atstk1005_defconfigThomas Petazzoni
Neither the kernel nor U-Boot have support for a 1005 board, so let's get rid of this board configuration, the corresponding target skeleton, kernel and busybox configuration and device table. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-16board: update and minimize atstk100x_defconfigThomas Petazzoni
Use recent U-Boot and kernel version, remove target skeleton and use the default one instead, remove useless kernel configuration, busybox configuration and device table. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-16board: remove support for at91sam9260pfThomas Petazzoni
It was supposed to be the support for AT91SAM9260 using a parallel flash (instead of the usual dataflash). But the provided U-Boot configuration at91sam9260pf.h was not used anywhere, and it was unsufficient to add correct support in U-Boot (some changes in U-Boot Makefile would also be needed). Additionnally, this configuration has not been merged into U-Boot upstream since 2007 (when it was added to Buildroot). Therefore, let's get rid of this configuration. If some users are interested, we can re-introduce it properly with their help. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-16board: update and minify at91sam9260dfc_defconfigThomas Petazzoni
Use recent U-Boot and kernel versions, remove useless kernel configuration file. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-16board: update and minify at91rm9200df_defconfigThomas Petazzoni
Use recent U-Boot and kernel versions, remove useless kernel configuration file. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-16board: simplify kb9202 boardThomas Petazzoni
Minimize the board defconfig, remove custom busybox configuration, custom kernel configuration (use the kernel defconfig instead), custom device table and target skeleton. The only difference in the target skeleton was the support of mdev and the usage of an automount script. Instead of adding this in a board-specific way, we should provide board-independent configuration options. There are already patches contributed to add support for mdev. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-16board: simplify atngw100 supportThomas Petazzoni
Minimize atngw100_defconfig, remove atngw100-base_defconfig, and remove the target skeleton and device table. Instead of having complete copies of new target skeletons (making them hard to maintain), we should just have a post-build script that adds/removes/tweaks the existing target skeleton. Moreover, most of the tweaks in this target skeleton were for specific packages, but the policy now is that board defconfig should just build a basic root filesystem with Busybox, and let the user select whichever set of packages (s)he wants. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-16board: remove i386/i686_defconfigThomas Petazzoni
Those are not associated with any specific hardware system (PC or another i386 system). Moreover, the fact that those configurations require the build of a JFFS2 filesystem, very uncommon on PC systems, seems to indicate that those configurations are not really being used today. It would make more sense to have a qemu_i388_defconfig (building a kernel with just the device drivers for Qemu) and possibly a pc_i386_defconfig (building a kernel with many device drivers, and a bootloader such as Grub or Grub 2). We also remove the corresponding kernel configuration files. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-16Remove useless kernel config files for integrator926Thomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-16board: update and minify at91sam9g20dfc_defconfigThomas Petazzoni
Use modern U-Boot and kernel versions, get rid of the now unused kernel configuration file since we use the kernel defconfig instead. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-16board: update and minify at91sam9261ek_defconfigThomas Petazzoni
Use modern U-Boot and kernel versions, and get rid of the useless kernel configuration file, since we now use the kernel defconfig. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-16board: update and minify at91sam9263ek_defconfigThomas Petazzoni
Use modern kernel and U-Boot versions, and get rid of the now useless kernel configuration file since we use the kernel defconfig file instead. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-16Remove crazy set of empty directoriesThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-16Remove Busybox skeleton from target/device/AtmelThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-16Remove all Config.in/Makefile.in files in target/deviceThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-15Move Config.in.mirrors out of target/deviceThomas Petazzoni
Having Config.in.mirrors (which also to select various download sites) inside target/device sounds strange. This commit moves the contents of Config.in.mirrors directly into the main Config.in file. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-15Remove useless target/device/mipsThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-15Remove completely useless set of Makefiles specific to AtmelThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-12-15Remove unused Atmel-specific mirror definitionsThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-09-30skeleton: fix atstk1005, ststk100x and atngw100 for POSIX complianceYann E. MORIN
Using two '=' for string comparison is a bashism. Revert to using one, as stated in POSIX 1003.1-2008. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-07-18Atmel/atstk100*: make /etc/mtab a symlink to /proc/mountsPeter Korsgaard
Closes #2233 To match the other skeletons. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-06-23target/device: misc cleanupPeter Korsgaard
Remove outdated and/or unused variables/files. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-06-23integrator926: use standard uclibc configPeter Korsgaard
I don't see any reason to use a custom config here. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-06-22target: get rid of unused BR2_COPYTO / BR2_TARGET_ATMEL_COPYTOPeter Korsgaard
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-06-21Config.in.mirrors: Use sources.buildroot.net as default backup sitePeter Korsgaard
The buildroot/busybox/uClibc VM is running low on disk space, and we've been asked to move the source mirrors off-site. A redirect has been setup between the old buildroot.net/downloads/sources/ and sources.buildroot.net, so old .configs continue to work, but we might as well use the official one now. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-06-10u-boot: remove arch specific patches infrastructureThomas Petazzoni
A very complicated infrastructure for just a special case, for an ancient version of U-Boot. Recent versions of U-Boot are reported to work just fine on Atmel ARM evaluation boards. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-06-10bootloaders: move bootloader build code to boot/Thomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-06-09skeleton: remove loopback interface configuration from inittabBaruch Siach
The lo interface is marked auto in /etc/network/interfaces, so the configuration of the loopback network interface is part of the S40network init script. This causes the "RTNETLINK answers: File exists" error message to appear at startup time. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-04-21Add support to linux 2.6.30 kernel patches for Atmel arm in menuconfig.Josh.Wu
Signed-off-by: Josh.Wu <josh.wu@atmel.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-04-17Remove all TARGET_DEVICE_TABLE definitionsThomas Petazzoni
We have a special case for Xtensa, which was patching the generic device_table.txt. Instead of doing this, we just keep a copy of the device table, specific to Xtensa, with Xtensa specifities. The fact that the patch wasn't applying anymore on the generic device table is a sign that the existing approach wasn't working anyway. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09atmel: Add at91sam9g45ekes board supportJosh.Wu
Signed-off-by: Josh.Wu <josh.wu@atmel.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-03-14target/linux: remove ancient (<2.6.27) versionsPeter Korsgaard
And get rid of the corresponding at91 patches as well. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-02-17at91boostrap makefile, correct typo in line continuation character.Rob Alley
The rule to copy the resulting binary file into the binary directory had a typo in the line continuation character that results in a spurious error message being produced. Signed-off-by: Rob Alley <Rob.Alley@navmanwireless.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-12-14remove unused AVR32 specific uClibc configurationThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2009-12-14Remove external source toolchain optionsThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2009-10-29target/device/Atmel/arch-arm/u-boot: Fix u-boot patch dependenciesPeter Korsgaard
Ensure that the 2009.01 u-boot patches can only be enabled for 2009.01 builds. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-10-06mirrors: don't put atmel mirrors in seperate menuPeter Korsgaard
Show Atmel mirrors together with the other mirrors, instead of hiding them in yet another sub-menu. At the same time, add an empty line before the Atmel include as noticed by Hartley Sweeten. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-10-06atmel mirrors are only needed for atmel targetsBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-10-05do not append localversion automaticallyBernhard Reutner-Fischer
prevents build failures if modules are enabled and localversion is "" Signed-off-by: aldot <rep.dot.nop@gmail.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-10-04buildroot; move defconfigs to configs/ and print in helpPeter Korsgaard
As discussed earlier on the mailing list. It simplifies code, gives more sensible error message on typos and makes the defconfigs easier to find for users. Furthermore, update documentation to match. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-09-30Fix download directory in default configsMichael Roth
Commit a07d6b9d56955bfe0165b5f4ea6d3ed7a92ecff6 changed the meaning of $(BASE_DIR). Previously it was the top level buildroot directory, now it is the 'output' directory. As an side effect, the download directory 'dl' was moved to 'output/dl'. In commit 416323e93442646e344a4e914776520c5e552fa0 the default download directory was moved back to the top level of buildroot. So the various default configurations should reflect this. Fix them. Signed-off-by: Michael Roth <mroth@nessie.de> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-09-23rename TOOL_BUILD_DIR to TOOLCHAIN_DIRMichael Roth
To reflect the new output directory hierachy rename the Makefile variable TOOL_BUILD_DIR to TOOLCHAIN_DIR. Signed-off-by: Michael Roth <mroth@nessie.de> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-09-19target: update default /etc/issue and /etc/hostnamePeter Korsgaard
Adjust default /etc/issue to print 'Welcome to Buildroot' like the recently removed BR2_BANNER did, and adjust default hostname to be 'buildroot' instead of uclibc as we now support external glibc toolchains as well. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-09-16Remove the "project" featureThomas Petazzoni
The "project" feature was designed to allow to several projects to be built inside the same Buildroot source tree and allowing the toolchain and non-configurable packages to be shared between the different projects on the same architecture. While being interesting in theory, this feature adds a level of complexity to Buildroot, both from an user perspective and from a developer perspective, while one of the main Buildroot strengh is to be simple. Moreover, this feature is only seldomly used by our users. From a user-level perspective, this for example allows to remove the project_build_ARCH directory, which was very confusing. The autotools-stamps directory is also removed, since these stamps are back at their normal location. Description of the changes involved : * project/, directory removed * Makefile - Don't include project/Makefile.in and project/project.mk anymore - Grab a copy of the contents of project/Makefile.in at the location it was imported, but remove the definition related to PROJECT_BUILD_DIR. The TARGET_DIR is now in $(BUILD_DIR)/target_dir - Remove the creation/removal of the $(PROJECT_BUILD_DIR) and $(PROJECT_BUILD_DIR)/autotools-stamps directories - Don't make world depends on target-host-info. This target was defined by project/project.mk to customize /etc/issue, /etc/hostname and create /etc/br-version depending on the project definitions. We can of course imagine re-adding such a feature later. - Replace PROJECT_BUILD_DIR by BUILD_DIR everywhere - Remove the update, log and lognr.$(PROJECT) target, they were specific to the project feature. * package/Makefile.autotools.in - Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the configure cache - Move the INSTALL_TARGET and HOOK_POST_INSTALL stamps to the same directory as the other stamps (i.e, in the package directory). * package/Makefile.in - Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the configure cache * package/at/at.mk, package/busybox/busybox.mk, package/busybox/initramfs.mk, package/customize/customize.mk, package/linux-fusion/linux-fusion.mk, package/ltp-testsuite/ltp-testsuite.mk, package/nfs-utils/nfs-utils.mk, target/cpio/cpioroot.mk, target/cramfs/cramfs.mk, target/device/Atmel/DataFlashBoot/DataflashBoot.mk, target/device/Atmel/Makefile.in, target/device/Atmel/at91bootstrap/at91bootstrap.mk, target/device/KwikByte/Makefile.in, target/ext2/ext2root.mk, target/initramfs/initramfs.mk, target/iso9660/iso9660.mk, target/jffs2/jffs2root.mk, target/linux/Makefile.in, target/romfs/romfs.mk, target/squashfs/squashfsroot.mk, target/tar/tarroot.mk, target/ubifs/ubifsroot.mk - Replace PROJECT_BUILD_DIR by BUILD_DIR * target/device/Config.in - Do not include project/Config.in anymore * target/linux/Makefile.in.advanced - Replace PROJECT_BUILD_DIR by BUILD_DIR - Store the stamps file in $(STAMP_DIR) instead of $(PROJECT_BUILD_DIR)/autotools-stamps * target/u-boot/Makefile.in - Replace PROJECT_BUILD_DIR by BUILD_DIR - Remove $(PROJECT) from the U-Boot target binary name - Remove the insertion in the configuration of the project name as the hostname - The u-boot-autoscript target now generates $(U_BOOT_AUTOSCRIPT).img instead of $(U_BOOT_AUTOSCRIPT).$(PROJECT) * toolchain/gcc/gcc-uclibc-3.x.mk toolchain/gcc/gcc-uclibc-4.x.mk - Move the stamps files to $(STAMP_DIR) Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2009-09-15target/device/Atmel: get rid of unused filesPeter Korsgaard
No references to these anywhere in the tree. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-09-05target: use qstripThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2009-09-01target/device/AMD: removePeter Korsgaard
It hasn't been touched in years, and Config.in refers to non-existing files (linux.mk), so there cannot be many users. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 04:56:56 +0000