summaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2010-06-21Config.in.mirrors: Use sources.buildroot.net as default backup sitePeter Korsgaard
The buildroot/busybox/uClibc VM is running low on disk space, and we've been asked to move the source mirrors off-site. A redirect has been setup between the old buildroot.net/downloads/sources/ and sources.buildroot.net, so old .configs continue to work, but we might as well use the official one now. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-06-13linux: fix dependency on mkimageThomas Petazzoni
After the rework of the U-Boot configuration/compilation process, we need to slightly rework how target/linux/Makefile.in.advanced depends on mkimage on the host to produce an uImage. target/linux/Makefile.in doesn't need to be fixed as it just doesn't handle this dependency for the moment. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-06-10u-boot: remove arch specific patches infrastructureThomas Petazzoni
A very complicated infrastructure for just a special case, for an ancient version of U-Boot. Recent versions of U-Boot are reported to work just fine on Atmel ARM evaluation boards. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-06-10bootloaders: move bootloader build code to boot/Thomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-06-09skeleton: remove loopback interface configuration from inittabBaruch Siach
The lo interface is marked auto in /etc/network/interfaces, so the configuration of the loopback network interface is part of the S40network init script. This causes the "RTNETLINK answers: File exists" error message to appear at startup time. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-06-08Set correct GCC tune option for ARM926T(==ARM926EJ-S) coreJulien Boibessot
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-05-28linux: zImage target no longer available on x86Peter Korsgaard
The legacy zImage target for x86 was removed from the kernel in 2.6.30, and we state in Config.in that we'll use bzImage if BR2_PACKAGE_LINUX_FORMAT isn't set, so ensure we do so for x86. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-05-26busybox skeleton: allow logins from ttymxc[0-2]Baruch Siach
Add ttymxc[0-2] to the list is the /etc/securetty of the Busybox skeleton. This is useful for serial logins on i.MX based systems. The same serial devices already appear in the generic "target_skeleton/". Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-05-21Makefile: move filesystem stuff after u-boot build againPeter Korsgaard
Otherwise u-boot tools / kernel modules are only added to target AFTER the filesystems are built. Long term u-boot/kernel stuff should get splitted from target/device, but this is the safest solution for now. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-05-16target/linux: bump 2.6.32 and 2.6.33 versionsH Hartley Sweeten
New versions of the 2.6.32 and 2.6.33 kernel were released today and it is suggested that all users should upgrade. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-05-03target/generic: inittab: fix devpts mounts when devtmpfs is usedPeter Korsgaard
If devtmpfs (the kernel-maintained /dev filesystem) is used, no /dev/pts directory is created, causing the devpts mount to fail, which in term causes stuff like dropbear to fail. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-05-03Remove last users of the ROOTFS_SUFFIX thingThomas Petazzoni
The ROOTFS_SUFFIX thing has been removed in 325bfd1cbae03fe286796d3fa7de7c0a3227f7a5, so get rid of the last users. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-05-03Get rid of KERNEL_CROSSThomas Petazzoni
In both internal and external toolchain cases, KERNEL_CROSS was defined to *exactly* the same value as TARGET_CROSS. It isn't modified anywhere, and is just used by kernel compilation and pcmcia compilation. Therefore, get rid of KERNEL_CROSS and use TARGET_CROSS instead. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-05-01linux-advanced: Fix Kernel EXTRAVERSION for BR2_LINUX26_CUSTOMserj.kalichev
Closes #1267 Signed-off-by: serj.kalichev <serj.kalichev@gmail.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-04-21Add support to linux 2.6.30 kernel patches for Atmel arm in menuconfig.Josh.Wu
Signed-off-by: Josh.Wu <josh.wu@atmel.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-04-20target: really remove the target/*/*.mk includePeter Korsgaard
Commit 5faae4869027 claimed to do this, but it didn't - Causing make to error out. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-04-20Repair initramfs dependancies after move to fsWill Wagner
The restructure for building root filesystems changed the target name for the initramfs file, to build the file the trget is now initramfs-root but the generated file is rootfs.initramfs Signed-off-by: Will Wagner <will_wagner@carallon.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-04-19makedevs: move to package/Thomas Petazzoni
Since target/ doesn't contain any .mk file in subdirectories, also remove the include in target/Makefile.in.
2010-04-17Update defconfigs to include BR2_ROOTFS_DEVICE_TABLE definitionThomas Petazzoni
We only bother updating the defconfigs that need a non-default BR2_ROOTFS_DEVICE_TABLE value. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-17Remove all TARGET_DEVICE_TABLE definitionsThomas Petazzoni
We have a special case for Xtensa, which was patching the generic device_table.txt. Instead of doing this, we just keep a copy of the device table, specific to Xtensa, with Xtensa specifities. The fact that the patch wasn't applying anymore on the generic device table is a sign that the existing approach wasn't working anyway. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-12Get rid of all usages of BR2_RECENTThomas Petazzoni
Since BR2_RECENT was enabled by default, we do not want entries marked BR2_RECENT (and thus appearing by default in Buildroot) to disappear. Therefore, all the entries marked BR2_RECENT are converted as non-deprecated. We can later decide, on a per-entry basis, to add BR2_DEPRECATED to some of them. But at least, this commit doesn't change the default current behaviour of Buildroot. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-11Update defconfigs after BR2_UPDATE_CONFIG removalThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09Merge branch 'fs-cleanup' of git://git.busybox.net/~tpetazzoni/git/buildrootPeter Korsgaard
2010-04-09Move all filesystem generation code to fs/Thomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09Remove IMAGE and related configuration optionsThomas Petazzoni
Now, we just hardcode the image filenames to be rootfs.$(FSTYPE), in the $(BINARIES_DIR). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09iso9660: rework in a similar way to ROOTFS_TARGETThomas Petazzoni
Unfortunately, it cannot use the ROOTFS_TARGET infrastructure, due to the specifities of the iso9660 build process. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09target/common: do not use IMAGEThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09initramfs: convert to ROOTFS_TARGET infrastructureThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09ubifs: convert to ROOTFS_TARGET infrastructureThomas Petazzoni
We also remove the BR2_TARGET_ROOTFS_UBIFS_OUTPUT option, that could be used to specify an alternate name for the generated image file. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09jffs2: convert to ROOTFS_TARGET infrastructureThomas Petazzoni
We also remove the BR2_TARGET_ROOTFS_JFFS2_OUTPUT option, that could be used to specify an alternate name for the generated image file. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09ext2: convert to ROOTFS_TARGET infrastructureThomas Petazzoni
We also remove the BR2_TARGET_ROOTFS_EXT2_OUTPUT option, that could be used to specify an alternate name for the generated image file. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09squashfs: convert to ROOTFS_TARGET infrastructureThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09tar: convert to ROOTFS_TARGET infrastructureThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09romfs: convert to ROOTFS_TARGET infrastructureThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09cramfs: convert to ROOTFS_TARGET infrastructureThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09cpio: convert to ROOTFS_TARGET infrastructureThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09cloop: convert to ROOTFS_TARGET infrastructureThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09target: Add new infrastructure for filesystem generationThomas Petazzoni
In order to avoid code duplication between the different filesystem generation makefile, we introduce a ROOTFS_TARGET macro. Documentation for this macro is contained in the patch. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09target/: remove the COPYTO messThomas Petazzoni
There's no need to provide options to copy the filesystem image after the build. Just use 'cp' outside of Buildroot. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09fakeroot: remove all references to BR2_HOST_FAKEROOTThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09target/ubifs: cleanup, unbrokenThomas Petazzoni
Use package/mtd to build the host mtd-utils, which contains mkfs.ubifs. Remove dependency on BR2_HOST_FAKEROOT. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09target/tar: cleanupThomas Petazzoni
Remove dependency on BR2_HOST_FAKEROOT. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09target/squashfs: cleanup, remove support for 3.xThomas Petazzoni
Remove the code to build squashfs-tools for the host, since they can now be built using package/squashfs. We also remove support for Squashfs 3.x, because the Squashfs driver merged inside the mainline kernel is a 4.x driver. So 3.x is only useful for old kernels using a Squashfs patch. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09target/romfs: cleanupThomas Petazzoni
Remove the code needed to build host genromfs, since it can now be done using package/genromfs. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09target/jffs2: cleanupThomas Petazzoni
Remove the code to build host MTD utils, since they can now be built using package/mtd. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09target/iso9660: cleanupThomas Petazzoni
Remove the mkisofs host tools building process, which is now in package/cdrkit. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09target/ext2: cleanupThomas Petazzoni
Remove the genext2fs host tools building process, which is now in package/genext2fs. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09target/cramfs: cleanupThomas Petazzoni
Remove the cramfs host tools building process, which is now in package/cramfs. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09target/cpio: cleanupThomas Petazzoni
* Remove the dependency on BR2_HOST_FAKEROOT, since we don't have config option for host tools. * Remove a few useless things. * Check that cpio is available on the host in toolchain/dependencies/dependencies.sh. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-04-09target/cloop: cleanupThomas Petazzoni
Remove the code to build the cloop utilities for the host (it is now in package/cloop). Use fakeroot instead of ugly sudo. The cloop filesystem generation code is now much more similar to other filesystems code. Remove empty Makefile.in. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>