summaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2010-04-02Remove ConfigFS from Busybox skeletonPaulius Zaleckas
It is not included in generic skeleton and very unlikely that someone will use it on embedded devices. AFAIK even Fedora does not include it in fstab. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-04-02u-boot: add 2010.03, adapt target mkimage step to work with 2010.03Peter Korsgaard
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-03-30get rid of broken nios2 supportPeter Korsgaard
Has been marked as broken for more than 1 year, with no indication that anyone cares, and it needs a bunch of special handling. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-03-14target/linux: remove ancient (<2.6.27) versionsPeter Korsgaard
And get rid of the corresponding at91 patches as well. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-03-13target: add linux 2.6.33H Hartley Sweeten
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-03-10remove -mm linux patch optionsH Hartley Sweeten
The -mm tree is really no longer available since the -next tree was created for testing. It's not even listed on the kernel.org site any longer. Plus, the last one that was published as available was pretty old, 2.6.28-rc2-mm1. Remove all the -mm patch stuff from Buildroot to clean up the Linux kernel selection. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-03-02squashfs: fix 3.4 build after be8a104c3cd (pass CFLAGS/LDFLAGS and add ↵Peter Korsgaard
host-zlib dependency) Commit be8a104c3cd (pass CFLAGS/LDFLAGS and add host-zlib dependency) changed the way make was invocated for squashfs and added a patch for 4.0, but forgot to add an equivalent patch for 3.4. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-02-26squashfs: pass CFLAGS/LDFLAGS and add host-zlib dependencyThomas Petazzoni
Squashfs depends on host-zlib, so we add this as a dependency. As host-zlib is installed in $(HOST_DIR), we must pass $(HOST_CFLAGS) and $(HOST_LDFLAGS). Unfortunately, if we pass CFLAGS=$(HOST_CFLAGS), we override the CFLAGS defined in the Makefile, and the build fails. Therefore, we borrow a patch from OpenEmbedded to fix this problem. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-02-26cramfs: add CFLAGS/LDFLAGS and host-zlib dependencyThomas Petazzoni
cramfs depends on host-zlib, so it must be built prior to cramfs. Moreover, we need to pass the HOST_CFLAGS and HOST_LDFLAGS variables, otherwise it doesn't find zlib in $(HOST_DIR). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-02-24bump linux kernel versionsH Hartley Sweeten
Bump all the linux kernel version to the latest available and add a help note for all of them with the release data and status. The long-term stable 2.6.27 kernel is really out of date (.27 -> .45). Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-02-23linux-advanced: Fix probing of kernel versionCameron Hutchison
Probing the kernel version uses command substitution to capture the result of a make command. If the top-level make is run with -C, the sub-make will print entering/leaving directory messages, mucking up the output we're trying to capture. Invoke the sub-make with --no-print-directory so we get clean output. Signed-off-by: Cameron Hutchison <cam@camh.ch> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-02-23linux-advanced: add 2.6.32.8Will Wagner
Signed-off-by: Will Wagner <will_wagner@carallon.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-02-17at91boostrap makefile, correct typo in line continuation character.Rob Alley
The rule to copy the resulting binary file into the binary directory had a typo in the line continuation character that results in a spurious error message being produced. Signed-off-by: Rob Alley <Rob.Alley@navmanwireless.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-02-03target/jffs2: Don't select BR2_PACKAGE_MTDPeter Korsgaard
Mtd-utils on the target are not a requirement to using jffs2. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-01-20Bump iptables to 1.4.6Gustavo Zacarias
Closes #913. Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-12-26Drop generic package selection (access point, firewall, dev system)Gustavo Zacarias
Closes #813. Drop generic package selection (access point, firewall, dev system) since they're too ambiguous and not very useful. Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-12-18target/u-boot: add 2009.11 and update target mkimage so it builds with 2009.11Peter Korsgaard
In 2009.11, a number of extra files are needed to build mkimage. Adjust the makefile to add those if available, so it builds with both 2009.11 and older releases. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-12-18target/u-boot: install mkimage to HOST_DIRPeter Korsgaard
As suggested by Thomas. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-12-18Fix mkimage-install problem with external toolchain.Anders Darander
Closes #757. Make sure that /usr/bin/ exists, before trying to copy mkimage to that location. When using an external toolchain, /usr/bin is not guarenteed to exist. Signed-off-by: Anders Darander <ad@datarespons.se> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-12-14remove unused AVR32 specific uClibc configurationThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2009-12-14Update non-AVR32 defconfigsThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2009-12-14Remove external source toolchain optionsThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2009-12-14Use BR2_TOOLCHAIN_BUILDROOT instead of BR2_TOOLCHAIN_SOURCEThomas Petazzoni
The BR2_TOOLCHAIN_SOURCE option is removed in a future commit. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2009-11-22target/jffs2: add support for nand flash with 512B page / 16 kB erasesizeKelvin Cheung
Closes #663 Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-11-18Add support for the Cortex-A8 ARM targetLaine Walker-Avina
Signed-off-by: Laine Walker-Avina <lwalkera@ieee.org> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-10-29target/device/Atmel/arch-arm/u-boot: Fix u-boot patch dependenciesPeter Korsgaard
Ensure that the 2009.01 u-boot patches can only be enabled for 2009.01 builds. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-10-15busybox: invert hide optionPeter Korsgaard
Invert the BR2_PACKAGE_BUSYBOX_HIDE_OTHERS option to use positive logic, renaming it to _SHOW_OTHERS. Positive logic is simpler to understand, and it makes all{,package}config do the right thing. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-10-09*-menuconfig needs dirs to existBernhard Reutner-Fischer
In a pristine checkout the -menuconfig targets need their build dirs to exist. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-10-07allow menuconfig without a LINUX26_KCONFIG fileBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-10-06mirrors: don't put atmel mirrors in seperate menuPeter Korsgaard
Show Atmel mirrors together with the other mirrors, instead of hiding them in yet another sub-menu. At the same time, add an empty line before the Atmel include as noticed by Hartley Sweeten. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-10-06default to EABI on armBernhard Reutner-Fischer
Use of OABI is strongly discouraged since years now. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-10-06atmel mirrors are only needed for atmel targetsBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-10-06target/generic: /etc/{hostname,issue}: work around quotes in kconfigPeter Korsgaard
Otherwise the targets will always run. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-10-05do not append localversion automaticallyBernhard Reutner-Fischer
prevents build failures if modules are enabled and localversion is "" Signed-off-by: aldot <rep.dot.nop@gmail.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-10-04buildroot; move defconfigs to configs/ and print in helpPeter Korsgaard
As discussed earlier on the mailing list. It simplifies code, gives more sensible error message on typos and makes the defconfigs easier to find for users. Furthermore, update documentation to match. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-10-01buildroot: silence ./configure step when building with 'make -s'Peter Korsgaard
We have been passing -q to ./configure when using 'make -s' for packages using Makefile.autotools.in for some time. Do the same for packages using autotools, but not using the Makefile.autotools.in infrastructure, taking care to not do it for packages with hand written configure scripts. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-09-30buildroot: reinstate /etc/{hostname,issue} kconfig when using generic targetPeter Korsgaard
These got lost in the recent cleanup, but are handy for minimal rootfs customization. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-09-30Fix download directory in default configsMichael Roth
Commit a07d6b9d56955bfe0165b5f4ea6d3ed7a92ecff6 changed the meaning of $(BASE_DIR). Previously it was the top level buildroot directory, now it is the 'output' directory. As an side effect, the download directory 'dl' was moved to 'output/dl'. In commit 416323e93442646e344a4e914776520c5e552fa0 the default download directory was moved back to the top level of buildroot. So the various default configurations should reflect this. Fix them. Signed-off-by: Michael Roth <mroth@nessie.de> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-09-23syslinux: update to v3.82Anders Darander
Signed-off-by: Anders Darander <ad@datarespons.se> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-09-23rename TOOL_BUILD_DIR to TOOLCHAIN_DIRMichael Roth
To reflect the new output directory hierachy rename the Makefile variable TOOL_BUILD_DIR to TOOLCHAIN_DIR. Signed-off-by: Michael Roth <mroth@nessie.de> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-09-19target: update default /etc/issue and /etc/hostnamePeter Korsgaard
Adjust default /etc/issue to print 'Welcome to Buildroot' like the recently removed BR2_BANNER did, and adjust default hostname to be 'buildroot' instead of uclibc as we now support external glibc toolchains as well. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-09-16Remove the "project" featureThomas Petazzoni
The "project" feature was designed to allow to several projects to be built inside the same Buildroot source tree and allowing the toolchain and non-configurable packages to be shared between the different projects on the same architecture. While being interesting in theory, this feature adds a level of complexity to Buildroot, both from an user perspective and from a developer perspective, while one of the main Buildroot strengh is to be simple. Moreover, this feature is only seldomly used by our users. From a user-level perspective, this for example allows to remove the project_build_ARCH directory, which was very confusing. The autotools-stamps directory is also removed, since these stamps are back at their normal location. Description of the changes involved : * project/, directory removed * Makefile - Don't include project/Makefile.in and project/project.mk anymore - Grab a copy of the contents of project/Makefile.in at the location it was imported, but remove the definition related to PROJECT_BUILD_DIR. The TARGET_DIR is now in $(BUILD_DIR)/target_dir - Remove the creation/removal of the $(PROJECT_BUILD_DIR) and $(PROJECT_BUILD_DIR)/autotools-stamps directories - Don't make world depends on target-host-info. This target was defined by project/project.mk to customize /etc/issue, /etc/hostname and create /etc/br-version depending on the project definitions. We can of course imagine re-adding such a feature later. - Replace PROJECT_BUILD_DIR by BUILD_DIR everywhere - Remove the update, log and lognr.$(PROJECT) target, they were specific to the project feature. * package/Makefile.autotools.in - Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the configure cache - Move the INSTALL_TARGET and HOOK_POST_INSTALL stamps to the same directory as the other stamps (i.e, in the package directory). * package/Makefile.in - Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the configure cache * package/at/at.mk, package/busybox/busybox.mk, package/busybox/initramfs.mk, package/customize/customize.mk, package/linux-fusion/linux-fusion.mk, package/ltp-testsuite/ltp-testsuite.mk, package/nfs-utils/nfs-utils.mk, target/cpio/cpioroot.mk, target/cramfs/cramfs.mk, target/device/Atmel/DataFlashBoot/DataflashBoot.mk, target/device/Atmel/Makefile.in, target/device/Atmel/at91bootstrap/at91bootstrap.mk, target/device/KwikByte/Makefile.in, target/ext2/ext2root.mk, target/initramfs/initramfs.mk, target/iso9660/iso9660.mk, target/jffs2/jffs2root.mk, target/linux/Makefile.in, target/romfs/romfs.mk, target/squashfs/squashfsroot.mk, target/tar/tarroot.mk, target/ubifs/ubifsroot.mk - Replace PROJECT_BUILD_DIR by BUILD_DIR * target/device/Config.in - Do not include project/Config.in anymore * target/linux/Makefile.in.advanced - Replace PROJECT_BUILD_DIR by BUILD_DIR - Store the stamps file in $(STAMP_DIR) instead of $(PROJECT_BUILD_DIR)/autotools-stamps * target/u-boot/Makefile.in - Replace PROJECT_BUILD_DIR by BUILD_DIR - Remove $(PROJECT) from the U-Boot target binary name - Remove the insertion in the configuration of the project name as the hostname - The u-boot-autoscript target now generates $(U_BOOT_AUTOSCRIPT).img instead of $(U_BOOT_AUTOSCRIPT).$(PROJECT) * toolchain/gcc/gcc-uclibc-3.x.mk toolchain/gcc/gcc-uclibc-4.x.mk - Move the stamps files to $(STAMP_DIR) Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2009-09-15target/device/Atmel: get rid of unused filesPeter Korsgaard
No references to these anywhere in the tree. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-09-14squashfs: fix for mksquashfs 4.0 race conditionPeter Korsgaard
Fix for the race condition in mksquashfs recently seen. Patch by Phillip Lougher. See http://thread.gmane.org/gmane.comp.file-systems.squashfs.devel/76 for details. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-09-05target: use qstripThomas Petazzoni
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2009-09-01target/device/AMD: removePeter Korsgaard
It hasn't been touched in years, and Config.in refers to non-existing files (linux.mk), so there cannot be many users. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-09-01u-boot: remove ancient 1.3.4 versionPeter Korsgaard
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-09-01u-boot: add 2009.08Peter Korsgaard
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-08-27u-boot: mark old 2008.10 version as deprecatedPeter Korsgaard
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-08-03buildroot: fix fallout after qtopia4 -> qt renamePeter Korsgaard
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>