From 62f5e1572453ebafe2587f173f22ba8fcfe46d8b Mon Sep 17 00:00:00 2001 From: Ulf Samuelsson Date: Wed, 15 Aug 2007 09:42:33 +0000 Subject: Add programmable start adr/size to at91bootstrap + support for at91sam9260pf --- .../Atmel/at91bootstrap/at91bootstrap-2.3.2.patch | 506 +++++++++++++++++++++ 1 file changed, 506 insertions(+) create mode 100644 target/device/Atmel/at91bootstrap/at91bootstrap-2.3.2.patch (limited to 'target/device/Atmel/at91bootstrap/at91bootstrap-2.3.2.patch') diff --git a/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.2.patch b/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.2.patch new file mode 100644 index 000000000..7b7bae18f --- /dev/null +++ b/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.2.patch @@ -0,0 +1,506 @@ +diff -urN at91bootstrap-2.3/board/at91sam9260ek/at91sam9260ek.c at91bootstrap-2.3.2/board/at91sam9260ek/at91sam9260ek.c +--- at91bootstrap-2.3/board/at91sam9260ek/at91sam9260ek.c 2007-03-28 16:05:09.000000000 +0200 ++++ at91bootstrap-2.3.2/board/at91sam9260ek/at91sam9260ek.c 2007-08-14 23:20:24.000000000 +0200 +@@ -47,7 +47,9 @@ + #ifdef CFG_DATAFLASH + #include "../../include/dataflash.h" + #endif +- ++#ifdef CFG_FLASH ++#include "../../include/flash.h" ++#endif + static inline unsigned int get_cp15(void) + { + unsigned int value; +@@ -129,6 +131,10 @@ + (MASTER_CLOCK * 7)/1000000); /* Refresh Timer Register */ + + #endif /* CFG_SDRAM */ ++ ++#ifdef CFG_FLASH ++ flash_hw_init(); ++#endif + } + #endif /* CFG_HW_INIT */ + +@@ -221,7 +227,24 @@ + } + #endif /* CFG_DATAFLASH */ + ++#ifdef CFG_FLASH ++ ++/*------------------------------------------------------------------------------*/ ++/* \fn flash_hw_init */ ++/* \brief This function performs Flash HW initialization */ ++/*------------------------------------------------------------------------------*/ ++void flash_hw_init(void) ++{ ++ /* Configure PIOs */ ++ const struct pio_desc flash_pio[] = { ++ {(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ }; ++ ++ /* Configure the PIO controller */ ++ pio_setup(flash_pio); ++} + ++#endif /* CFG_FLASH */ + + #ifdef CFG_NANDFLASH + /*------------------------------------------------------------------------------*/ +diff -urN at91bootstrap-2.3/board/at91sam9260ek/flash/at91sam9260ek.h at91bootstrap-2.3.2/board/at91sam9260ek/flash/at91sam9260ek.h +--- at91bootstrap-2.3/board/at91sam9260ek/flash/at91sam9260ek.h 1970-01-01 01:00:00.000000000 +0100 ++++ at91bootstrap-2.3.2/board/at91sam9260ek/flash/at91sam9260ek.h 2007-08-14 22:53:58.000000000 +0200 +@@ -0,0 +1,88 @@ ++/* ---------------------------------------------------------------------------- ++ * ATMEL Microcontroller Software Support - ROUSSET - ++ * ---------------------------------------------------------------------------- ++ * Copyright (c) 2006, Atmel Corporation ++ ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * ++ * - Redistributions of source code must retain the above copyright notice, ++ * this list of conditions and the disclaiimer below. ++ * ++ * - Redistributions in binary form must reproduce the above copyright notice, ++ * this list of conditions and the disclaimer below in the documentation and/or ++ * other materials provided with the distribution. ++ * ++ * Atmel's name may not be used to endorse or promote products derived from ++ * this software without specific prior written permission. ++ * ++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE ++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, ++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, ++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ---------------------------------------------------------------------------- ++ * File Name : at91sam9260ek.h ++ * Object : ++ * Creation : NLe Jul 13th 2006 ++ *----------------------------------------------------------------------------- ++ */ ++#ifndef _AT91SAM9260EK_H ++#define _AT91SAM9260EK_H ++/* ******************************************************************* */ ++/* PMC Settings */ ++/* */ ++/* The main oscillator is enabled as soon as possible in the c_startup */ ++/* and MCK is switched on the main oscillator. */ ++/* PLL initialization is done later in the hw_init() function */ ++/* ******************************************************************* */ ++#define MASTER_CLOCK (198656000/2) ++ ++#define PLL_LOCK_TIMEOUT 1000000 ++ ++#define PLLA_SETTINGS 0x2060BF09 ++#define PLLB_SETTINGS 0x10483F0E ++ ++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */ ++#define MCKR_SETTINGS (AT91C_PMC_CSS_PLLA_CLK | AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2) ++ ++/* Flash settings - Use a default, which hopefully works for all AT91 chips */ ++#include "smc0_setup.h" ++ ++ ++/* ******************************************************************* */ ++/* BootStrap Settings */ ++/* */ ++/* ******************************************************************* */ ++#define MACH_TYPE 0x44B /* AT91SAM9260-EK */ ++ ++#define IMG_ADDRESS 0x8000 /* Image Address in Flash */ ++ ++#if defined(IMG_SIZE) ++#warning "IMG_SIZE redefined" ++#else ++#define IMG_SIZE 0x38000 /* Image Size in Flash */ ++#endif ++ ++#if defined(JUMP_ADDR) ++#warning "JUMP_ADDR redefined" ++#else ++#define JUMP_ADDR 0x23F00000 /* Final Jump Address */ ++#endif ++ ++/* ******************************************************************* */ ++/* Application Settings */ ++/* ******************************************************************* */ ++#define CFG_DEBUG ++#define CFG_FLASH ++#define CFG_SDRAM ++#define CFG_HW_INIT ++ ++#endif /* _AT91SAM9260EK_H */ +diff -urN at91bootstrap-2.3/crt0_gnu.S at91bootstrap-2.3.2/crt0_gnu.S +--- at91bootstrap-2.3/crt0_gnu.S 2006-12-05 11:27:24.000000000 +0100 ++++ at91bootstrap-2.3.2/crt0_gnu.S 2007-08-14 23:23:49.000000000 +0200 +@@ -84,6 +84,13 @@ + _init_stack: + ldr sp,=TOP_OF_MEM + ++/* Initialize the SMC BEFORE we change the clock */ ++#ifdef CFG_FLASH ++ ldr r4, = smc0_hw_init ++ mov lr, pc ++ bx r4 ++#endif ++ + /* Test if main oscillator is enabled */ + ldr r0,=AT91C_PMC_SR + ldr r1, [r0] +diff -urN at91bootstrap-2.3/driver/driver.mk at91bootstrap-2.3.2/driver/driver.mk +--- at91bootstrap-2.3/driver/driver.mk 2007-03-25 16:24:08.000000000 +0200 ++++ at91bootstrap-2.3.2/driver/driver.mk 2007-08-14 21:17:53.000000000 +0200 +@@ -1,10 +1,11 @@ + # Makefile for AT91-Bootstrap drivers directory + +-COBJS-y += driver/debug.o +-COBJS-y += driver/gpio.o +-COBJS-y += driver/pmc.o +-COBJS-y += driver/sdramc.o +-COBJS-y += driver/string.o +-COBJS-y += driver/udiv.o +-COBJS-$(CONFIG_NANDFLASH) += driver/nandflash.o +-COBJS-$(CONFIG_DATAFLASH) += driver/dataflash.o ++COBJS-y += driver/debug.o ++COBJS-y += driver/gpio.o ++COBJS-y += driver/pmc.o ++COBJS-y += driver/sdramc.o ++COBJS-y += driver/string.o ++COBJS-y += driver/udiv.o ++COBJS-$(CONFIG_NANDFLASH) += driver/nandflash.o ++COBJS-$(CONFIG_DATAFLASH) += driver/dataflash.o ++COBJS-$(CONFIG_FLASH) += driver/flash.o +diff -urN at91bootstrap-2.3/driver/flash.c at91bootstrap-2.3.2/driver/flash.c +--- at91bootstrap-2.3/driver/flash.c 1970-01-01 01:00:00.000000000 +0100 ++++ at91bootstrap-2.3.2/driver/flash.c 2007-08-14 23:20:29.000000000 +0200 +@@ -0,0 +1,132 @@ ++/* ---------------------------------------------------------------------------- ++ * ATMEL Microcontroller Software Support - ROUSSET - ++ * ---------------------------------------------------------------------------- ++ * Copyright (c) 2007, Atmel Corporation ++ ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * ++ * - Redistributions of source code must retain the above copyright notice, ++ * this list of conditions and the disclaiimer below. ++ * ++ * - Redistributions in binary form must reproduce the above copyright notice, ++ * this list of conditions and the disclaimer below in the documentation and/or ++ * other materials provided with the distribution. ++ * ++ * Atmel's name may not be used to endorse or promote products derived from ++ * this software without specific prior written permission. ++ * ++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE ++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, ++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, ++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ---------------------------------------------------------------------------- ++ * File Name : flash.c ++ * Object : Flash High level functions ++ * Creation : USa Aug 14th 2007 ++ *--------------------------------------------------------------------------- ++*/ ++ ++#include "../include/part.h" ++#include "../include/main.h" ++#include "../include/flash.h" ++#include "../include/smc.h" ++#include ++ ++#ifdef CFG_FLASH ++ ++/*------------------------------------------------------------------------------*/ ++/* \fn smc0_hw_init */ ++/* \brief This function performs Static Memory Controller HW initialization */ ++/* It should be executed BEFORE the slow clock is changed */ ++/* WARNING: The C_Startup has done VERY LITTLE at this point */ ++/*------------------------------------------------------------------------------*/ ++void smc0_hw_init(void) ++{ ++ /* The SMC is either clocked by the Slow clock or by MCLK ++ * MCLK is typically 100 MHz ++ */ ++ ++unsigned int setup0,pulse0,cycle0,mode0; ++ ++ writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) |DATABUS_PULLUP_ON|MEMORY_VOLTAGE_3_3V , AT91C_BASE_CCFG + CCFG_EBICSA); ++ ++ /* Check : SETUP + PULSE <= CYCLE ! */ ++ ++ setup0 = ++ ((NCS_READ_SETUP & 0x3F) << 24) | // (128 * bit[5]) + bit[4:0] ++ ((NRD_SETUP & 0x3F) << 16) | // (128 * bit[5]) + bit[4:0] ++ ((NCS_WR_SETUP & 0x3F) << 8) | // (128 * bit[5]) + bit[4:0] ++ ((NWE_SETUP & 0x3F) << 0); // (128 * bit[5]) + bit[4:0] ++ writel(setup0, AT91C_BASE_SMC + SMC_SETUP0); ++ ++ pulse0 = ++ ((NCS_READ_PULSE & 0x3F) << 24) | // (128 * bit[5]) + bit[4:0] ++ ((NRD_PULSE & 0x3F) << 16) | // (128 * bit[5]) + bit[4:0] ++ ((NCS_WR_PULSE & 0x3F) << 8) | // (128 * bit[5]) + bit[4:0] ++ ((NWE_PULSE & 0x3F) << 0); // (128 * bit[5]) + bit[4:0] ++ writel(pulse0, AT91C_BASE_SMC + SMC_PULSE0); ++ ++ cycle0 = ++ ((NRD_CYCLE & 0x1FF) << 16) | // (256 * bit[8:7]) + bit[6:0] ++ ((NWE_CYCLE & 0x1FF) << 0); // (256 * bit[8:7]) + bit[6:0] ++ writel(cycle0, AT91C_BASE_SMC + SMC_CYCLE0); ++ ++ mode0 = (PS|PMEN|TDF_MODE|TDF_CYCLES|DBW|BAT|EXNW_MODE|WRITE_MODE|READ_MODE); ++ writel(mode0, AT91C_BASE_SMC + SMC_CTRL0); ++} ++ ++/*------------------------------------------------------------------------------*/ ++/* \fn flash_is_boot_valid */ ++/* \brief Check that the first bytes of the buffer are valid ARM vectors */ ++/*------------------------------------------------------------------------------*/ ++static unsigned int flash_is_boot_valid(unsigned char *buffer) ++{ ++ int i = 3; ++ ++ /* Verify if the 28 first bytes of the sram correspond to ARM vectors ++ The sixth ARM vector contain the size of the code */ ++ while(i < 28) ++ { ++ if (i != 23) ++ { ++ if ((buffer[i] != 0xEA) && (buffer[i] != 0xE5) ) ++ return -1; ++ } ++ i+=4; ++ } ++ ++ return 0; ++} ++ ++/*------------------------------------------------------------------------------*/ ++/* \fn load_flash */ ++/* \brief This function loads flash content to specified address */ ++/*------------------------------------------------------------------------------*/ ++int load_flash(unsigned int img_addr, unsigned int img_size, unsigned int img_dest) ++{ ++ unsigned char *src, *dst; ++ src = (unsigned char *) img_addr; ++ dst = (unsigned char *) img_dest; ++ ++ flash_hw_init(); ++ ++ if (flash_is_boot_valid((unsigned char*)img_addr)) ++ return -1; ++ ++ while (img_size > 0) { ++ *dst++ = *src++; ++ img_size--; ++ } ++ return 0; ++} ++ ++#endif /* CFG_FLASH */ +diff -urN at91bootstrap-2.3/include/AT91SAM9260_inc.h at91bootstrap-2.3.2/include/AT91SAM9260_inc.h +--- at91bootstrap-2.3/include/AT91SAM9260_inc.h 2006-12-05 11:27:20.000000000 +0100 ++++ at91bootstrap-2.3.2/include/AT91SAM9260_inc.h 2007-08-14 23:05:19.000000000 +0200 +@@ -463,7 +463,7 @@ + #define AT91C_EBI_CS5A_SMC (0x0 << 5) // (CCFG) Chip Select 5 is only assigned to the Static Memory Controller and NCS5 behaves as defined by the SMC + #define AT91C_EBI_CS5A_CF (0x1 << 5) // (CCFG) Chip Select 5 is assigned to the Static Memory Controller and the CompactFlash Logic (second slot) is activated. + #define AT91C_EBI_DBPUC (0x1 << 8) // (CCFG) Data Bus Pull-up Configuration +- ++#define AT91C_EBI_VDDIOMSEL (0x1 << 16) + // ***************************************************************************** + // SOFTWARE API DEFINITION FOR Peripheral DMA Controller + // ***************************************************************************** +diff -urN at91bootstrap-2.3/include/flash.h at91bootstrap-2.3.2/include/flash.h +--- at91bootstrap-2.3/include/flash.h 1970-01-01 01:00:00.000000000 +0100 ++++ at91bootstrap-2.3.2/include/flash.h 2007-08-14 23:20:11.000000000 +0200 +@@ -0,0 +1,41 @@ ++/* ---------------------------------------------------------------------------- ++ * ATMEL Microcontroller Software Support - ROUSSET - ++ * ---------------------------------------------------------------------------- ++ * Copyright (c) 2007, Atmel Corporation ++ ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * ++ * - Redistributions of source code must retain the above copyright notice, ++ * this list of conditions and the disclaiimer below. ++ * ++ * - Redistributions in binary form must reproduce the above copyright notice, ++ * this list of conditions and the disclaimer below in the documentation and/or ++ * other materials provided with the distribution. ++ * ++ * Atmel's name may not be used to endorse or promote products derived from ++ * this software without specific prior written permission. ++ * ++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE ++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, ++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, ++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ---------------------------------------------------------------------------- ++ * File Name : flash.h ++ * Object : ATMEL Flash Header File ++ * Creation : USa Aug 14th 2007 ++ *--------------------------------------------------------------------------- ++*/ ++#ifndef _FLASH_H ++#define _FLASH_H ++extern void flash_hw_init(void); ++extern int load_flash(unsigned int img_addr, unsigned int img_size, unsigned int img_dest); ++#endif +diff -urN at91bootstrap-2.3/include/smc0_setup.h at91bootstrap-2.3.2/include/smc0_setup.h +--- at91bootstrap-2.3/include/smc0_setup.h 1970-01-01 01:00:00.000000000 +0100 ++++ at91bootstrap-2.3.2/include/smc0_setup.h 2007-08-14 22:54:21.000000000 +0200 +@@ -0,0 +1,32 @@ ++/* ******************************************************************* */ ++/* SMC0 Settings */ ++/* We use this as a default for all */ ++/* ******************************************************************* */ ++ ++#ifndef _SMC0_SETUP_H ++#define _SMC0_SETUP_H ++ ++#define NCS_READ_SETUP _ns(10) ++#define NRD_SETUP _ns(20) ++#define NCS_WR_SETUP _ns(10) ++#define NWE_SETUP _ns(20) ++ ++#define NCS_READ_PULSE _ns(100) ++#define NRD_PULSE _ns(100) ++#define NCS_WR_PULSE _ns(100) ++#define NWE_PULSE _ns(100) ++ ++#define NRD_CYCLE _ns(140) ++#define NWE_CYCLE _ns(140) ++ ++#define PS AT91C_SMC_PS_SIZE_SIXTEEN_BYTES ++#define PMEN PAGE_MODE_OFF ++#define TDF_MODE TDF_OPTIMIZATION_OFF ++#define TDF_CYCLES _ns(60) ++#define DBW AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS ++#define BAT AT91C_SMC_BAT_BYTE_SELECT ++#define EXNW_MODE AT91C_SMC_NWAITM_NWAIT_DISABLE ++#define WRITE_MODE CONTROLLED_BY_NWE ++#define READ_MODE CONTROLLED_BY_NRD ++ ++#endif +diff -urN at91bootstrap-2.3/include/smc.h at91bootstrap-2.3.2/include/smc.h +--- at91bootstrap-2.3/include/smc.h 1970-01-01 01:00:00.000000000 +0100 ++++ at91bootstrap-2.3.2/include/smc.h 2007-08-14 23:05:30.000000000 +0200 +@@ -0,0 +1,19 @@ ++#define MASTER_CLOCK_CYCLE (1000000000/MASTER_CLOCK) ++#define _ns(x) ((x)/MASTER_CLOCK_CYCLE) ++ ++#define CONTROLLED_BY_NRD AT91C_SMC_READMODE ++#define CONTROLLED_BY_NCS_RD 0 ++#define CONTROLLED_BY_NWE AT91C_SMC_WRITEMODE ++#define CONTROLLED_BY_NCS_WR 0 ++ ++#define TDF_OPTIMIZATION_ON AT91C_SMC_TDFEN ++#define TDF_OPTIMIZATION_OFF 0 ++ ++#define PAGE_MODE_ON AT91C_SMC_PMEN ++#define PAGE_MODE_OFF 0 ++ ++#define DATABUS_PULLUP_ON 0 ++#define DATABUS_PULLUP_OFF AT91C_EBI_DBPUC ++ ++#define MEMORY_VOLTAGE_1_8V 0 ++#define MEMORY_VOLTAGE_3_3V AT91C_EBI_VDDIOMSEL +diff -urN at91bootstrap-2.3/main.c at91bootstrap-2.3.2/main.c +--- at91bootstrap-2.3/main.c 2006-12-05 11:27:24.000000000 +0100 ++++ at91bootstrap-2.3.2/main.c 2007-08-14 21:15:38.000000000 +0200 +@@ -38,6 +38,7 @@ + #include "include/main.h" + #include "include/debug.h" + #include "include/dataflash.h" ++#include "include/flash.h" + #include "include/nandflash.h" + + /*------------------------------------------------------------------------------*/ +@@ -60,6 +61,10 @@ + load_df(AT91C_SPI_PCS_DATAFLASH, IMG_ADDRESS, IMG_SIZE, JUMP_ADDR); + #endif + ++#ifdef CFG_FLASH ++ load_flash(IMG_ADDRESS, IMG_SIZE, JUMP_ADDR); ++#endif ++ + /* Load from Nandflash in RAM */ + #ifdef CFG_NANDFLASH + load_nandflash(IMG_ADDRESS, IMG_SIZE, JUMP_ADDR); +diff -urN at91bootstrap-2.3/MAKEALL at91bootstrap-2.3.2/MAKEALL +--- at91bootstrap-2.3/MAKEALL 2007-04-09 19:47:20.000000000 +0200 ++++ at91bootstrap-2.3.2/MAKEALL 2007-08-14 22:43:19.000000000 +0200 +@@ -1,7 +1,7 @@ + #!/bin/bash + +-make toolchain +-source gcc-3.4.6-uclibc.sh ++#make toolchain ++source gcc-4.1.2-uclibc-external.sh + make distrib + make MEMORY=dataflashcard at91sam9260dfc_defconfig + make +@@ -9,6 +9,8 @@ + make + make MEMORY=nandflash at91sam9260ek_defconfig + make ++make MEMORY=flash at91sam9260pf_defconfig ++make + make MEMORY=dataflash at91sam9261ek_defconfig + make + make MEMORY=nandflash at91sam9261ek_defconfig +diff -urN at91bootstrap-2.3/Makefile at91bootstrap-2.3.2/Makefile +--- at91bootstrap-2.3/Makefile 2007-08-14 23:53:42.000000000 +0200 ++++ at91bootstrap-2.3.2/Makefile 2007-08-14 22:36:24.000000000 +0200 +@@ -8,7 +8,7 @@ + + TOPDIR := $(CURDIR) + +-VERSION:=2.3.1 ++VERSION:=2.3.2 + + include .config + +@@ -114,6 +114,15 @@ + echo SPI_BOOT=SPI_BOOT_CS1 >> .config + echo SPI_CLK=$(CONFIG_SPI_CLK) >> .config + ++at91sam9260pf_defconfig: clean ++ echo BOARDNAME=at91sam9260pf > .config ++ echo BOARD=at91sam9260ek >> .config ++ echo PROJECT=$(MEMORY) >> .config ++ echo CONFIG_$(CFG_MEMORY)=y >> .config ++ echo SPI_MODE=$(CONFIG_SPI_MODE) >> .config ++ echo SPI_BOOT=SPI_BOOT_CS0 >> .config ++ echo SPI_CLK=$(CONFIG_SPI_CLK) >> .config ++ + at91sam9261ek_defconfig: clean + echo BOARDNAME=at91sam9261ek > .config + echo BOARD=at91sam9261ek >> .config -- cgit v1.2.3