From 0fabb345a785dffe7bd91536c81c8ef54eb8ed43 Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Sun, 5 Dec 2010 21:53:06 +0100
Subject: board: update and minimize atstk100x_defconfig

Use recent U-Boot and kernel version, remove target skeleton and use
the default one instead, remove useless kernel configuration, busybox
configuration and device table.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
 ...-200-gpio_mouse-setup-for-atstk1000-board.patch | 130 ---------------------
 1 file changed, 130 deletions(-)
 delete mode 100644 target/device/Atmel/atstk100x/kernel-patches/linux-2.6.23-200-gpio_mouse-setup-for-atstk1000-board.patch

(limited to 'target/device/Atmel/atstk100x/kernel-patches/linux-2.6.23-200-gpio_mouse-setup-for-atstk1000-board.patch')

diff --git a/target/device/Atmel/atstk100x/kernel-patches/linux-2.6.23-200-gpio_mouse-setup-for-atstk1000-board.patch b/target/device/Atmel/atstk100x/kernel-patches/linux-2.6.23-200-gpio_mouse-setup-for-atstk1000-board.patch
deleted file mode 100644
index 365ee494d..000000000
--- a/target/device/Atmel/atstk100x/kernel-patches/linux-2.6.23-200-gpio_mouse-setup-for-atstk1000-board.patch
+++ /dev/null
@@ -1,130 +0,0 @@
->From 9c5fa914202d20756c56e0c4fd76035ed8f8ced8 Mon Sep 17 00:00:00 2001
-From: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
-Date: Mon, 6 Aug 2007 08:31:14 +0200
-Subject: [PATCH 1/1] Add gpio_mouse board setup to atstk1000 board
-
-This patch adds a gpio_mouse_platform_data to the atstk1000 board code and
-registers a gpio_mouse platform_device. This will enable a GPIO mouse on header
-J1 on GPIO of the ATSTK1000 development kit. The board code is enabled/disabled
-in menuconfig.
-
-By connecting J1 (GPIO) to J25 (SWITCH) you can use the following keys to
-simulate a mouse:
-
-SW0: right
-SW1: down
-SW2: up
-SW3: left
-SW5: right button
-SW6: middle button
-SW7: left button
-
-Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
----
- arch/avr32/boards/atstk1000/Kconfig     |   16 ++++++++++
- arch/avr32/boards/atstk1000/atstk1002.c |   48 +++++++++++++++++++++++++++++++
- 2 files changed, 64 insertions(+), 0 deletions(-)
-
-diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
-index 718578f..d99d4bd 100644
---- a/arch/avr32/boards/atstk1000/Kconfig
-+++ b/arch/avr32/boards/atstk1000/Kconfig
-@@ -52,6 +52,22 @@ config BOARD_ATSTK100X_SPI1
- 	  GPIO lines and accessed through the J1 jumper block.  Say "y"
- 	  here to configure that SPI controller.
- 
-+config BOARD_ATSTK1002_GPIO_MOUSE
-+	bool "Configure gpio_mouse on GPIO J1 header"
-+	depends on !BOARD_ATSTK1002_SW4_CUSTOM
-+	help
-+	  Enable gpio_mouse board configuration on GPIO 0 to 7. Connecting a
-+	  10-pin flat cable from J1 (GPIO) to J25 (SWITCH) will let a user give
-+	  mouse inputs using the the switches SW0 to SW7.
-+
-+	  SW0: right
-+	  SW1: down
-+	  SW2: up
-+	  SW3: left
-+	  SW5: right button
-+	  SW6: middle button
-+	  SW7: left button
-+
- config BOARD_ATSTK1000_J2_LED
- 	bool
- 	default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB
-diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
-index c958fd4..c7560e5 100644
---- a/arch/avr32/boards/atstk1000/atstk1002.c
-+++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -16,6 +16,7 @@
- #include <linux/types.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/at73c213.h>
-+#include <linux/gpio_mouse.h>
- 
- #include <video/atmel_lcdc.h>
- 
-@@ -100,6 +101,49 @@ static struct mci_platform_data __initdata mci0_data = {
- 	.cs		= 4,
- };
- 
-+#ifdef CONFIG_BOARD_ATSTK1002_GPIO_MOUSE
-+static struct gpio_mouse_platform_data gpio_mouse0_data = {
-+	.polarity	= GPIO_MOUSE_POLARITY_ACT_LOW,
-+	{
-+		{
-+			.up		= GPIO_PIN_PB(2),
-+			.down		= GPIO_PIN_PB(1),
-+			.left		= GPIO_PIN_PB(3),
-+			.right		= GPIO_PIN_PB(0),
-+			.bleft		= GPIO_PIN_PB(7),
-+			.bmiddle	= GPIO_PIN_PB(6),
-+			.bright		= GPIO_PIN_PB(5),
-+		},
-+	},
-+	.scan_ms	= 10,
-+};
-+
-+static struct platform_device gpio_mouse0_device = {
-+	.name		= "gpio_mouse",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data = &gpio_mouse0_data,
-+	},
-+};
-+
-+static void __init add_device_gpio_mouse0(void)
-+{
-+	struct platform_device *pdev = &gpio_mouse0_device;
-+	struct gpio_mouse_platform_data *data = pdev->dev.platform_data;
-+
-+	at32_select_gpio(data->up, 0);
-+	at32_select_gpio(data->down, 0);
-+	at32_select_gpio(data->left, 0);
-+	at32_select_gpio(data->right, 0);
-+
-+	at32_select_gpio(data->bleft, 0);
-+	at32_select_gpio(data->bmiddle, 0);
-+	at32_select_gpio(data->bright, 0);
-+
-+	platform_device_register(pdev);
-+}
-+#endif
-+
- /*
-  * The next two functions should go away as the boot loader is
-  * supposed to initialize the macb address registers with a valid
-@@ -269,6 +313,10 @@ static int __init atstk1002_init(void)
- 	atstk1000_setup_j2_leds();
- 	atstk1002_setup_extdac();
- 
-+#ifdef CONFIG_BOARD_ATSTK1002_GPIO_MOUSE
-+	add_device_gpio_mouse0();
-+#endif
-+
- 	return 0;
- }
- postcore_initcall(atstk1002_init);
--- 
-1.5.2.3
-
-- 
cgit v1.2.3