From ff9b66d5d0809702bc9a2fd96fde65e1e96c9d1c Mon Sep 17 00:00:00 2001 From: Ulf Samuelsson Date: Sat, 3 Jan 2009 00:03:31 +0000 Subject: Add X-Modem tools for minicom to u-boot allowing easy downloading of U-Boot --- .../2009.01-rc1/u-boot-2009.01-rc1-007-tools.patch | 576 +++++++++++++++++++++ 1 file changed, 576 insertions(+) create mode 100644 target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-007-tools.patch (limited to 'target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-007-tools.patch') diff --git a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-007-tools.patch b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-007-tools.patch new file mode 100644 index 000000000..8f71ee043 --- /dev/null +++ b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-007-tools.patch @@ -0,0 +1,576 @@ +diff -urN u-boot-2008.10-0rig//tools/Makefile u-boot-2008.10/tools/Makefile +--- u-boot-2008.10-0rig//tools/Makefile 2008-12-31 17:51:29.000000000 +0100 ++++ u-boot-2008.10/tools/Makefile 2008-12-31 19:38:15.000000000 +0100 +@@ -37,6 +37,11 @@ + #OBJ_FILES += mpc86x_clk.o + #endif + ++ifeq ($(VENDOR),atmel) ++BINS+= raw-at91$(SFX) sx-at91$(SFX) ++OBJS+= raw-at91.o sx-at91.o ++endif ++ + LIBFDT_OBJ_FILES = $(obj)fdt.o $(obj)fdt_ro.o $(obj)fdt_rw.o $(obj)fdt_strerror.o $(obj)fdt_wip.o + + LOGO_H = $(OBJTREE)/include/bmp_logo.h +@@ -175,6 +180,14 @@ + $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ + $(STRIP) $@ + ++$(obj)raw-at91$(SFX): $(obj)raw-at91.o ++ $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ ++ $(STRIP) $@ ++ ++$(obj)sx-at91$(SFX): $(obj)sx-at91.o ++ $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ ++ $(STRIP) $@ ++ + $(obj)envcrc.o: $(src)envcrc.c + $(CC) -g $(CFLAGS) -c -o $@ $< + +@@ -223,6 +236,12 @@ + $(obj)fdt_wip.o: $(obj)fdt_wip.c + $(CC) -g $(FIT_CFLAGS) -c -o $@ $< + ++$(obj)sx-at91.o: $(src)sx-at91.c ++ $(CC) -g $(CFLAGS) -c -o $@ $< ++ ++$(obj)raw-at91.o: $(src)raw-at91.c ++ $(CC) -g $(CFLAGS) -c -o $@ $< ++ + subdirs: + ifeq ($(TOOLSUBDIRS),) + @: +diff -urN u-boot-2008.10-0rig//tools/raw-at91.c u-boot-2008.10/tools/raw-at91.c +--- u-boot-2008.10-0rig//tools/raw-at91.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2008.10/tools/raw-at91.c 2008-12-31 19:26:23.000000000 +0100 +@@ -0,0 +1,225 @@ ++/* ++ * xmodem-at91.c ++ * ++ * A simple program using xmodem/1kxmode upload file to at91rm9200 based board. ++ * Created by (C) Copyright 2004 ++ * Linhang.Zhang, Jilin University of PR.China, linxing@jlu.edu.cn. ++ * ++ ************************************************************************************* ++ * ++ * Modified 01-Feb-2005 (C)Copyright 2005 ++ * Marco Cavallini, www.KoanSoftware.com - ITALY, m.cavallini@koansoftware.com ++ * - edited indentations and changed break usage in switch statement. ++ * - added "\r" to printf ++ * ++ * - build with ++ * gcc sx-at91.c -o sx-at91 ++ * ++ * - Howto use this program with minicom/xminicom and AT91 ++ * start minicom or xminicom ++ * edit Options / File transfer protocol, ++ * add a name (for example J) like the following example ++ * ++ * | Name Program Name U/D FullScr IO-Red. Multi | ++ * | A zmodem /usr/bin/sz -vv -b Y U N Y Y | ++ * | B ymodem /usr/bin/sb -vv Y U N Y Y | ++ * | C xmodem /usr/bin/sx -vv Y U N Y N | ++ * | D zmodem /usr/bin/rz -vv -b -E N D N Y Y | ++ * | E ymodem /usr/bin/rb -vv N D N Y Y | ++ * | F xmodem /usr/bin/rx -vv Y D N Y N | ++ * | G kermit /usr/bin/kermit -i -l %l -s Y U Y N N | ++ * | H kermit /usr/bin/kermit -i -l %l -r N D Y N N | ++ * | I ascii /usr/bin/ascii-xfr -dsv Y U N Y N | ++ * | J at91 /home/koan/xmodem/xs-at91 Y U Y N N | ++ * | K - | ++ * | L - | ++ * ++ * save and use it selecting at91 protocol when you start an Xmodem upload to AT91 ++ * ++ ************************************************************************************* ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define TRUE 1 ++#define FALSE 0 ++#define LINESIZE 1024 ++ ++/*********/ ++ ++#define SERIAL_DEVICE "/dev/ttyS0" ++#define MYBAUDRATE B115200 ++ ++/***************SUB PROGRAM*******/ ++ ++int Initial_SerialPort(void) ++{ ++ int fd; ++ struct termios options; ++ ++ fd = open( SERIAL_DEVICE , O_RDWR | O_NOCTTY | O_NDELAY ); ++ if ( fd == -1 ) ++ { ++ /*open error!*/ ++ perror("Can't open serial port!"); ++ return -1; ++ } ++ ++ /*Get the current options for the port...*/ ++ tcgetattr(fd, &options); ++ ++ /*Set the baud rates to BAUDRATE...*/ ++ cfsetispeed(&options,MYBAUDRATE); ++ cfsetospeed(&options,MYBAUDRATE); ++ tcsetattr(fd, TCSANOW, &options); ++ if (0 != tcgetattr(fd, &options)) ++ { ++ perror("SetupSerial 1"); ++ return -1; ++ } ++ ++ /* ++ * 8bit Data,no partity,1 stop bit... ++ */ ++ options.c_cflag &= ~PARENB; ++ options.c_cflag &= ~CSTOPB; ++ options.c_cflag &= ~CSIZE; ++ options.c_cflag |= CS8; ++ tcflush(fd,TCIFLUSH); ++ ++ /***Choosing Raw Input*/ ++ options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG); ++ options.c_oflag &= ~OPOST; ++ ++ /* ++ * Set the new options for the port... ++ */ ++ if (0 != tcsetattr(fd, TCSANOW, &options)) ++ { ++ perror("SetupSerial error"); ++ return -1 ; ++ } ++ ++ return fd ; ++} ++ ++/******************************/ ++void ClearReceiveBuffer(int fd) ++{ ++ unsigned char tmp; ++ while ((read(fd,&tmp,1))>0); ++ ++ return; ++} ++unsigned char filebuf[ LINESIZE+2 ]; ++unsigned char outbuf[ LINESIZE+2 ]; ++FILE *datafile; ++int fd; ++ ++static unsigned int ChCnt=0; ++static unsigned int ChIx; ++unsigned char GetChar(unsigned char *ch) ++/* ++ * SUCCESS: Return TRUE ++ * FAILURE: Return FALSE ++ */ ++{ ++ ++ if(ChCnt == 0) { ++ ChCnt = fread( filebuf, sizeof(char), LINESIZE, datafile); ++ ChIx = 0; ++ } ++ if(ChCnt > 0) { ++ *ch = filebuf[ChIx++]; ++ ChCnt--; ++ return TRUE; ++ } else { ++ return FALSE; /* Reached End of File */ ++ } ++} ++ ++/********************************/ ++void delay() ++{ ++} ++ ++int main(int argc,char *argv[]) ++{ ++ char *data_file_name; ++ int len; ++ unsigned char c; ++ int complete,i,sts; ++ ++ printf("raw-at91 started...\r\n"); ++ ++ /* open serial port1 */ ++ if ( (fd = Initial_SerialPort()) == -1) ++ return -1 ; ++ ++ data_file_name = argv[1]; ++ ++ if((datafile=fopen(data_file_name,"rb"))==NULL) ++ { ++ perror ("Can't open file!"); ++ return -1 ; ++ } ++ ++ /*******************************/ ++ ++ complete = 0; ++ /* ClearReceiveBuffer(fd); */ ++ ++ /* while((read(fd,&ack_id,1))<=0);*/ ++ ++ /* printf("%c\r\n",ack_id); */ ++ while(!complete) ++ { ++ for(i=0;i < LINESIZE; i++) { /* A line more than 1024 characters will have problems...*/ ++ if((sts = GetChar(&outbuf[i]))) { ++ /* Sts = Success */ ++ if((c = outbuf[i]) == '\n') { /* Found end of Line - Start Processing*/ ++ outbuf[i+1] = '\0'; /* Terminate String*/ ++ break; ++ } ++ } else { ++ /* Sts = Failure - End of File */ ++ outbuf[i] = '\n'; ++ outbuf[i+1] = '\0'; ++ complete = 1; ++ } ++ } ++ printf("%s",outbuf); /* Inform user */ ++ len = strlen((char *)outbuf); ++ write(fd,outbuf,strlen((char *)outbuf)); ++ for(i = 0; i < 500000000; i++ ) delay(); ++ while((read(fd,&c,1))<=0) putchar(c); ++ printf(" "); ++ } ++ fclose(datafile); ++ close(fd); ++ return 0; ++} +diff -urN u-boot-2008.10-0rig//tools/sx-at91.c u-boot-2008.10/tools/sx-at91.c +--- u-boot-2008.10-0rig//tools/sx-at91.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2008.10/tools/sx-at91.c 2008-12-31 19:26:23.000000000 +0100 +@@ -0,0 +1,300 @@ ++/* ++ * xmodem-at91.c ++ * ++ * A simple program using xmodem/1kxmode upload file to at91rm9200 based board. ++ * Created by (C) Copyright 2004 ++ * Linhang.Zhang, Jilin University of PR.China, linxing@jlu.edu.cn. ++ * ++ ************************************************************************************* ++ * ++ * Modified 01-Feb-2005 (C)Copyright 2005 ++ * Marco Cavallini, www.KoanSoftware.com - ITALY, m.cavallini@koansoftware.com ++ * - edited indentations and changed break usage in switch statement. ++ * - added "\r" to printf ++ * ++ * - build with ++ * gcc sx-at91.c -o sx-at91 ++ * ++ * - Howto use this program with minicom/xminicom and AT91 ++ * start minicom or xminicom ++ * edit Options / File transfer protocol, ++ * add a name (for example J) like the following example ++ * ++ * | Name Program Name U/D FullScr IO-Red. Multi | ++ * | A zmodem /usr/bin/sz -vv -b Y U N Y Y | ++ * | B ymodem /usr/bin/sb -vv Y U N Y Y | ++ * | C xmodem /usr/bin/sx -vv Y U N Y N | ++ * | D zmodem /usr/bin/rz -vv -b -E N D N Y Y | ++ * | E ymodem /usr/bin/rb -vv N D N Y Y | ++ * | F xmodem /usr/bin/rx -vv Y D N Y N | ++ * | G kermit /usr/bin/kermit -i -l %l -s Y U Y N N | ++ * | H kermit /usr/bin/kermit -i -l %l -r N D Y N N | ++ * | I ascii /usr/bin/ascii-xfr -dsv Y U N Y N | ++ * | J at91 /home/koan/xmodem/xs-at91 Y U Y N N | ++ * | K - | ++ * | L - | ++ * ++ * save and use it selecting at91 protocol when you start an Xmodem upload to AT91 ++ * ++ ************************************************************************************* ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* ++Xmodem Frame form: <255-blk #><--128 data bytes--> ++*/ ++ ++#define XMODEM_SOH 0x01 ++#define XMODEM_STX 0x02 ++#define XMODEM_EOT 0x04 ++#define XMODEM_ACK 0x06 ++#define XMODEM_NAK 0x15 ++#define XMODEM_CRC_CHR 'C' ++#define XMODEM_CRC_SIZE 2 /* Crc_High Byte + Crc_Low Byte */ ++#define XMODEM_FRAME_ID_SIZE 2 /* Frame_Id + 255-Frame_Id */ ++#define XMODEM_DATA_SIZE_SOH 128 /* for Xmodem protocol */ ++#define XMODEM_DATA_SIZE_STX 1024 /* for 1K xmodem protocol */ ++#define USE_1K_XMODEM 0 /* 1 for use 1k_xmodem 0 for xmodem */ ++ ++#if (USE_1K_XMODEM) ++ #define XMODEM_DATA_SIZE XMODEM_DATA_SIZE_STX ++ #define XMODEM_HEAD XMODEM_STX ++#else ++ #define XMODEM_DATA_SIZE XMODEM_DATA_SIZE_SOH ++ #define XMODEM_HEAD XMODEM_SOH ++#endif ++/*********/ ++ ++#define SERIAL_DEVICE "/dev/ttyS0" ++#define MYBAUDRATE B115200 ++ ++/***************SUB PROGRAM*******/ ++unsigned short GetCrc16 ( char *ptr, unsigned short count ) ++{ ++ unsigned short crc, i; ++ ++ crc = 0; ++ while(count--) ++ { ++ crc = crc ^ (int) *ptr++ << 8; ++ ++ for(i = 0; i < 8; i++) ++ { ++ if(crc & 0x8000) ++ crc = crc << 1 ^ 0x1021; ++ else ++ crc = crc << 1; ++ } ++ } ++ ++ return (crc & 0xFFFF); ++} ++ ++/*******************************/ ++int Initial_SerialPort(void) ++{ ++ int fd; ++ struct termios options; ++ ++ fd = open( SERIAL_DEVICE , O_RDWR | O_NOCTTY | O_NDELAY ); ++ if ( fd == -1 ) ++ { ++ /*open error!*/ ++ perror("Can't open serial port!"); ++ return -1; ++ } ++ ++ /*Get the current options for the port...*/ ++ tcgetattr(fd, &options); ++ ++ /*Set the baud rates to BAUDRATE...*/ ++ cfsetispeed(&options,MYBAUDRATE); ++ cfsetospeed(&options,MYBAUDRATE); ++ tcsetattr(fd, TCSANOW, &options); ++ if (0 != tcgetattr(fd, &options)) ++ { ++ perror("SetupSerial 1"); ++ return -1; ++ } ++ ++ /* ++ * 8bit Data,no partity,1 stop bit... ++ */ ++ options.c_cflag &= ~PARENB; ++ options.c_cflag &= ~CSTOPB; ++ options.c_cflag &= ~CSIZE; ++ options.c_cflag |= CS8; ++ tcflush(fd,TCIFLUSH); ++ ++ /***Choosing Raw Input*/ ++ options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG); ++ options.c_oflag &= ~OPOST; ++ ++ /* ++ * Set the new options for the port... ++ */ ++ if (0 != tcsetattr(fd, TCSANOW, &options)) ++ { ++ perror("SetupSerial error"); ++ return -1 ; ++ } ++ ++ return fd ; ++} ++ ++/******************************/ ++void ClearReceiveBuffer(int fd) ++{ ++ unsigned char tmp; ++ while ((read(fd,&tmp,1))>0); ++ ++ return; ++} ++ ++/********************************/ ++int main(int argc,char *argv[]) ++{ ++ int fd; ++ char *data_file_name; ++ char packet_data[ XMODEM_DATA_SIZE ]; ++ char frame_data[ XMODEM_DATA_SIZE + XMODEM_CRC_SIZE + XMODEM_FRAME_ID_SIZE + 1 ]; ++ FILE *datafile; ++ int complete,retry_num,pack_counter,read_number,write_number,i; ++ unsigned short crc_value; ++ unsigned char ack_id; ++ ++ printf("sx-at91 started...\r\n"); ++ ++ /* open serial port1 */ ++ if ( (fd = Initial_SerialPort()) == -1) ++ return -1 ; ++ ++ data_file_name = argv[1]; ++ ++ if((datafile=fopen(data_file_name,"rb"))==NULL) ++ { ++ perror ("Can't open file!"); ++ return -1 ; ++ } ++ ++ /*******************************/ ++ ++ pack_counter = 0; ++ complete = 0; ++ retry_num = 0; ++ ClearReceiveBuffer(fd); ++ ++ while((read(fd,&ack_id,1))<=0); ++ ++ printf("%c\r\n",ack_id); ++ ack_id=XMODEM_ACK; ++ while(!complete) ++ { ++ switch(ack_id) ++ { ++ case XMODEM_ACK: ++ retry_num = 0; ++ pack_counter++; ++ read_number = fread( packet_data, sizeof(char), XMODEM_DATA_SIZE, datafile); ++ if(read_number>0) ++ { ++ if(read_number> 8); ++ frame_data[XMODEM_DATA_SIZE_SOH+4]=(unsigned char)(crc_value); ++ write_number = write( fd, frame_data, XMODEM_DATA_SIZE_SOH + 5); ++ printf("waiting for ACK,%d,%d,...",pack_counter,write_number); ++ while((read(fd,&ack_id,1))<=0); ++ ++ if(ack_id == XMODEM_ACK) ++ printf("Ok!\r\n"); ++ else ++ printf("Error!\r\n"); ++ } ++ else ++ { ++ ack_id = XMODEM_EOT; ++ complete = 1; ++ printf("Waiting for complete ACK ..."); ++ ++ while(ack_id != XMODEM_ACK) ++ { ++ ack_id = XMODEM_EOT; ++ write_number=write(fd,&ack_id,1); ++ while((read(fd,&ack_id,1))<=0); ++ } ++ printf("OK\r\n"); ++ ++ printf("Sending file complete\r\n"); ++ } ++ break; ++ ++ case XMODEM_NAK: ++ if( retry_num++ > 10) ++ { ++ printf("Retry too many times,Quit!\r\n"); ++ complete = 1; ++ } ++ else ++ { ++ write_number = write(fd,frame_data,XMODEM_DATA_SIZE + 5); ++ printf("Retry for ACK,%d,%d...",pack_counter,write_number); ++ while((read(fd,&ack_id,1))<=0); ++ ++ if( ack_id == XMODEM_ACK ) ++ printf("OK\r\n"); ++ else ++ printf("Error!\r\n"); ++ } ++ break; ++ ++ default: ++ printf("Fatal Error!\r\n"); ++ complete = 1; ++ break; ++ } ++ ++ } ++ ++ fclose(datafile); ++ close(fd); ++ ++ return 0; ++} -- cgit v1.2.3