From 7213dae7a5009ba966f261e04b50c49a0672cea3 Mon Sep 17 00:00:00 2001 From: Ulf Samuelsson Date: Sat, 3 Jan 2009 00:06:13 +0000 Subject: Add support for at91sam9g20 to U-Boot --- .../u-boot-2009.01-rc1-005-at91sam9g20ek.patch | 802 +++++++++++++++++++++ 1 file changed, 802 insertions(+) create mode 100644 target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-005-at91sam9g20ek.patch (limited to 'target') diff --git a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-005-at91sam9g20ek.patch b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-005-at91sam9g20ek.patch new file mode 100644 index 000000000..bb7e6b116 --- /dev/null +++ b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-005-at91sam9g20ek.patch @@ -0,0 +1,802 @@ +diff -urN u-boot-2008.10-0rig/Makefile u-boot-2008.10/Makefile +--- u-boot-2008.10-0rig/Makefile 2008-12-28 14:07:30.000000000 +0100 ++++ u-boot-2008.10/Makefile 2008-12-28 14:06:28.000000000 +0100 +@@ -2541,6 +2541,22 @@ + fi; + @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 + ++at91sam9g20ek_nandflash_config \ ++at91sam9g20ek_dataflash_cs0_config \ ++at91sam9g20ek_dataflash_cs1_config \ ++at91sam9g20ek_config : unconfig ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ ++ echo "#define CFG_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9g20ek arm arm926ejs at91sam9g20ek atmel at91 ++ + at91sam9261ek_nandflash_config \ + at91sam9261ek_dataflash_cs0_config \ + at91sam9261ek_dataflash_cs3_config \ +Index: include/configs/at91sam9g20ek.h +=================================================================== +--- a/include/configs/at91sam9g20ek.h (.../u-boot-1.3.4) (revision 0) ++++ b/include/configs/at91sam9g20ek.h (.../u-boot-1.3.4-exp) (revision 8417) +@@ -0,0 +1,198 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop ++ * Lead Tech Design ++ * ++ * Configuation settings for the AT91SAM9G20EK board. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++/* ARM asynchronous clock */ ++#define AT91_MAIN_CLOCK 396288000 /* from 18.432 MHz crystal */ ++#define AT91_MASTER_CLOCK 132096000 /* peripheral = main / 3 */ ++#define CFG_HZ 1000000 /* 1us resolution */ ++ ++#define AT91_SLOW_CLOCK 32768 /* slow clock */ ++ ++#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ ++#define CONFIG_AT91SAM9G20 1 /* It's an Atmel AT91SAM9G20 SoC*/ ++#define CONFIG_AT91SAM9G20EK 1 /* on an AT91SAM9G20EK Board */ ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++ ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_INITRD_TAG 1 ++ ++#define CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SKIP_RELOCATE_UBOOT ++ ++/* ++ * Hardware drivers ++ */ ++#define CONFIG_ATMEL_USART 1 ++#undef CONFIG_USART0 ++#undef CONFIG_USART1 ++#undef CONFIG_USART2 ++#define CONFIG_USART3 1 /* USART 3 is DBGU */ ++ ++#define CONFIG_BOOTDELAY 3 ++ ++/* ++ * BOOTP options ++ */ ++#define CONFIG_BOOTP_BOOTFILESIZE 1 ++#define CONFIG_BOOTP_BOOTPATH 1 ++#define CONFIG_BOOTP_GATEWAY 1 ++#define CONFIG_BOOTP_HOSTNAME 1 ++ ++/* ++ * Command line configuration. ++ */ ++#include ++#undef CONFIG_CMD_BDI ++#undef CONFIG_CMD_IMI ++#undef CONFIG_CMD_AUTOSCRIPT ++#undef CONFIG_CMD_FPGA ++#undef CONFIG_CMD_LOADS ++#undef CONFIG_CMD_IMLS ++ ++#define CONFIG_CMD_PING 1 ++#define CONFIG_CMD_DHCP 1 ++#define CONFIG_CMD_NAND 1 ++#define CONFIG_CMD_USB 1 ++ ++/* SDRAM */ ++#define CONFIG_NR_DRAM_BANKS 1 ++#define PHYS_SDRAM 0x20000000 ++#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ ++ ++/* DataFlash */ ++#define CONFIG_HAS_DATAFLASH 1 ++#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) ++#define CFG_MAX_DATAFLASH_BANKS 2 ++#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ ++#define CFG_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ ++#define AT91_SPI_CLK 15000000 ++#define DATAFLASH_TCSS (0x22 << 16) ++#define DATAFLASH_TCHS (0x1 << 24) ++ ++/* NAND flash */ ++#define NAND_MAX_CHIPS 1 ++#define CFG_MAX_NAND_DEVICE 1 ++#define CFG_NAND_BASE 0x40000000 ++#define CFG_NAND_DBW_8 1 ++ ++/* NOR flash - no real flash on this board */ ++#define CFG_NO_FLASH 1 ++ ++/* Ethernet */ ++#define CONFIG_MACB 1 ++#define CONFIG_RMII 1 ++#define CONFIG_NET_MULTI 1 ++#define CONFIG_NET_RETRY_COUNT 20 ++#define CONFIG_RESET_PHY_R 1 ++ ++/* USB */ ++#define CONFIG_USB_OHCI_NEW 1 ++#define LITTLEENDIAN 1 ++#define CONFIG_DOS_PARTITION 1 ++#define CFG_USB_OHCI_CPU_INIT 1 ++#define CFG_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9G20_UHP_BASE */ ++#define CFG_USB_OHCI_SLOT_NAME "at91sam9g20" ++#define CFG_USB_OHCI_MAX_ROOT_PORTS 2 ++#define CONFIG_USB_STORAGE 1 ++ ++#define CFG_LOAD_ADDR 0x22000000 /* load address */ ++ ++#define CFG_MEMTEST_START PHYS_SDRAM ++#define CFG_MEMTEST_END 0x23e00000 ++ ++#ifdef CFG_USE_DATAFLASH_CS0 ++ ++/* bootstrap + u-boot + env + linux in dataflash on CS0 */ ++#define CFG_ENV_IS_IN_DATAFLASH 1 ++#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) ++#define CFG_ENV_OFFSET 0x4200 ++#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) ++#define CFG_ENV_SIZE 0x4200 ++#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock0 " \ ++ "mtdparts=at91_nand:-(root) " \ ++ "rw rootfstype=jffs2" ++ ++#elif CFG_USE_DATAFLASH_CS1 ++ ++/* bootstrap + u-boot + env + linux in dataflash on CS1 */ ++#define CFG_ENV_IS_IN_DATAFLASH 1 ++#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) ++#define CFG_ENV_OFFSET 0x4200 ++#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS1 + CFG_ENV_OFFSET) ++#define CFG_ENV_SIZE 0x4200 ++#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock0 " \ ++ "mtdparts=at91_nand:-(root) " \ ++ "rw rootfstype=jffs2" ++ ++#else /* CFG_USE_NANDFLASH */ ++ ++/* bootstrap + u-boot + env + linux in nandflash */ ++#define CFG_ENV_IS_IN_NAND 1 ++#define CFG_ENV_OFFSET 0x60000 ++#define CFG_ENV_OFFSET_REDUND 0x80000 ++#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ ++#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock5 " \ ++ "mtdparts=at91_nand:128k(bootstrap)ro," \ ++ "256k(uboot)ro,128k(env1)ro," \ ++ "128k(env2)ro,2M(linux),-(root) " \ ++ "rw rootfstype=jffs2" ++ ++#endif ++ ++#define CONFIG_BAUDRATE 115200 ++#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } ++ ++#define CFG_PROMPT "U-Boot> " ++#define CFG_CBSIZE 256 ++#define CFG_MAXARGS 16 ++#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) ++#define CFG_LONGHELP 1 ++#define CONFIG_CMDLINE_EDITING 1 ++ ++#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) ++/* ++ * Size of malloc() pool ++ */ ++#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000) ++#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ ++ ++#define CONFIG_STACKSIZE (32*1024) /* regular stack */ ++ ++#ifdef CONFIG_USE_IRQ ++#error CONFIG_USE_IRQ not supported ++#endif ++ ++#endif +Index: board/atmel/at91sam9g20ek/nand.c +=================================================================== +--- a/board/atmel/at91sam9g20ek/nand.c (.../u-boot-1.3.4) (revision 0) ++++ b/board/atmel/at91sam9g20ek/nand.c (.../u-boot-1.3.4-exp) (revision 8417) +@@ -0,0 +1,79 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop ++ * Lead Tech Design ++ * ++ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include ++ ++/* ++ * hardware specific access to control-lines ++ */ ++#define MASK_ALE (1 << 21) /* our ALE is AD21 */ ++#define MASK_CLE (1 << 22) /* our CLE is AD22 */ ++ ++static void at91sam9g20ek_nand_hwcontrol(struct mtd_info *mtd, int cmd) ++{ ++ struct nand_chip *this = mtd->priv; ++ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; ++ ++ IO_ADDR_W &= ~(MASK_ALE|MASK_CLE); ++ switch (cmd) { ++ case NAND_CTL_SETCLE: ++ IO_ADDR_W |= MASK_CLE; ++ break; ++ case NAND_CTL_SETALE: ++ IO_ADDR_W |= MASK_ALE; ++ break; ++ case NAND_CTL_CLRNCE: ++ at91_set_gpio_value(AT91_PIN_PC14, 1); ++ break; ++ case NAND_CTL_SETNCE: ++ at91_set_gpio_value(AT91_PIN_PC14, 0); ++ break; ++ } ++ this->IO_ADDR_W = (void *) IO_ADDR_W; ++} ++ ++static int at91sam9g20ek_nand_ready(struct mtd_info *mtd) ++{ ++ return at91_get_gpio_value(AT91_PIN_PC13); ++} ++ ++int board_nand_init(struct nand_chip *nand) ++{ ++ nand->eccmode = NAND_ECC_SOFT; ++#ifdef CFG_NAND_DBW_16 ++ nand->options = NAND_BUSWIDTH_16; ++#endif ++ nand->hwcontrol = at91sam9g20ek_nand_hwcontrol; ++ nand->dev_ready = at91sam9g20ek_nand_ready; ++ nand->chip_delay = 20; ++ ++ return 0; ++} +Index: board/atmel/at91sam9g20ek/at91sam9g20ek.c +=================================================================== +--- a/board/atmel/at91sam9g20ek/at91sam9g20ek.c (.../u-boot-1.3.4) (revision 0) ++++ b/board/atmel/at91sam9g20ek/at91sam9g20ek.c (.../u-boot-1.3.4-exp) (revision 8417) +@@ -0,0 +1,250 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop ++ * Lead Tech Design ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) ++#include ++#endif ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++/* ------------------------------------------------------------------------- */ ++/* ++ * Miscelaneous platform dependent initialisations ++ */ ++ ++static void at91sam9g20ek_serial_hw_init(void) ++{ ++#ifdef CONFIG_USART0 ++ at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ ++ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); ++#endif ++ ++#ifdef CONFIG_USART1 ++ at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ ++ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); ++#endif ++ ++#ifdef CONFIG_USART2 ++ at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ ++ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); ++#endif ++ ++#ifdef CONFIG_USART3 /* DBGU */ ++ at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */ ++ at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); ++#endif ++} ++ ++#ifdef CONFIG_CMD_NAND ++static void at91sam9g20ek_nand_hw_init(void) ++{ ++ unsigned long csa; ++ ++ /* Enable CS3 */ ++ csa = at91_sys_read(AT91_MATRIX_EBICSA); ++ at91_sys_write(AT91_MATRIX_EBICSA, ++ csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); ++ ++ /* Configure SMC CS3 for NAND/SmartMedia */ ++ at91_sys_write(AT91_SMC_SETUP(3), ++ AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | ++ AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); ++ at91_sys_write(AT91_SMC_PULSE(3), ++ AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) | ++ AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(3)); ++ at91_sys_write(AT91_SMC_CYCLE(3), ++ AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); ++ at91_sys_write(AT91_SMC_MODE(3), ++ AT91_SMC_READMODE | AT91_SMC_WRITEMODE | ++ AT91_SMC_EXNWMODE_DISABLE | ++#ifdef CFG_NAND_DBW_16 ++ AT91_SMC_DBW_16 | ++#else /* CFG_NAND_DBW_8 */ ++ AT91_SMC_DBW_8 | ++#endif ++ AT91_SMC_TDF_(3)); ++ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); ++ ++ /* Configure RDY/BSY */ ++ at91_set_gpio_input(AT91_PIN_PC13, 1); ++ ++ /* Enable NandFlash */ ++ at91_set_gpio_output(AT91_PIN_PC14, 1); ++} ++#endif ++ ++#ifdef CONFIG_HAS_DATAFLASH ++static void at91sam9g20ek_spi_hw_init(void) ++{ ++ at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */ ++ at91_set_B_periph(AT91_PIN_PC11, 0); /* SPI0_NPCS1 */ ++ ++ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ ++ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ ++ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ ++ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0); ++} ++#endif ++ ++#ifdef CONFIG_MACB ++static void at91sam9g20ek_macb_hw_init(void) ++{ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC); ++ ++ /* ++ * Disable pull-up on: ++ * RXDV (PA17) => PHY normal mode (not Test mode) ++ * ERX0 (PA14) => PHY ADDR0 ++ * ERX1 (PA15) => PHY ADDR1 ++ * ERX2 (PA25) => PHY ADDR2 ++ * ERX3 (PA26) => PHY ADDR3 ++ * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0 ++ * ++ * PHY has internal pull-down ++ */ ++ writel(pin_to_mask(AT91_PIN_PA14) | ++ pin_to_mask(AT91_PIN_PA15) | ++ pin_to_mask(AT91_PIN_PA17) | ++ pin_to_mask(AT91_PIN_PA25) | ++ pin_to_mask(AT91_PIN_PA26) | ++ pin_to_mask(AT91_PIN_PA28), ++ pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); ++ ++ /* Need to reset PHY -> 500ms reset */ ++ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | ++ (AT91_RSTC_ERSTL & (0x0D << 8)) | ++ AT91_RSTC_URSTEN); ++ ++ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); ++ ++ /* Wait for end hardware reset */ ++ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); ++ ++ /* Restore NRST value */ ++ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | ++ (AT91_RSTC_ERSTL & (0x0 << 8)) | ++ AT91_RSTC_URSTEN); ++ ++ /* Re-enable pull-up */ ++ writel(pin_to_mask(AT91_PIN_PA14) | ++ pin_to_mask(AT91_PIN_PA15) | ++ pin_to_mask(AT91_PIN_PA17) | ++ pin_to_mask(AT91_PIN_PA25) | ++ pin_to_mask(AT91_PIN_PA26) | ++ pin_to_mask(AT91_PIN_PA28), ++ pin_to_controller(AT91_PIN_PA0) + PIO_PUER); ++ ++ at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */ ++ at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ ++ at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */ ++ at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */ ++ at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */ ++ at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */ ++ at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */ ++ at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */ ++ at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */ ++ at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */ ++ ++#ifndef CONFIG_RMII ++ at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */ ++ at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */ ++ at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ ++ at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ ++ at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ ++#if defined(CONFIG_AT91SAM9G20EK) ++ /* ++ * use PA10, PA11 for ETX2, ETX3. ++ * PA23 and PA24 are for TWI EEPROM ++ */ ++ at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */ ++ at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */ ++#else ++ at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */ ++ at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */ ++#endif ++ at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */ ++#endif ++ ++} ++#endif ++ ++int board_init(void) ++{ ++ /* Enable Ctrlc */ ++ console_init_f(); ++ ++ /* arch number of AT91SAM9G20EK-Board */ ++ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK; ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; ++ ++ at91sam9g20ek_serial_hw_init(); ++#ifdef CONFIG_CMD_NAND ++ at91sam9g20ek_nand_hw_init(); ++#endif ++#ifdef CONFIG_HAS_DATAFLASH ++ at91sam9g20ek_spi_hw_init(); ++#endif ++#ifdef CONFIG_MACB ++ at91sam9g20ek_macb_hw_init(); ++#endif ++ ++ return 0; ++} ++ ++int dram_init(void) ++{ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; ++ return 0; ++} ++ ++#ifdef CONFIG_RESET_PHY_R ++void reset_phy(void) ++{ ++#ifdef CONFIG_MACB ++ /* ++ * Initialize ethernet HW addr prior to starting Linux, ++ * needed for nfsroot ++ */ ++ eth_init(gd->bd); ++#endif ++} ++#endif +Index: board/atmel/at91sam9g20ek/led.c +=================================================================== +--- a/board/atmel/at91sam9g20ek/led.c (.../u-boot-1.3.4) (revision 0) ++++ b/board/atmel/at91sam9g20ek/led.c (.../u-boot-1.3.4-exp) (revision 8417) +@@ -0,0 +1,64 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop ++ * Lead Tech Design ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#define RED_LED AT91_PIN_PA9 /* this is the power led */ ++#define GREEN_LED AT91_PIN_PA6 /* this is the user led */ ++ ++void red_LED_on(void) ++{ ++ at91_set_gpio_value(RED_LED, 1); ++} ++ ++void red_LED_off(void) ++{ ++ at91_set_gpio_value(RED_LED, 0); ++} ++ ++void green_LED_on(void) ++{ ++ at91_set_gpio_value(GREEN_LED, 0); ++} ++ ++void green_LED_off(void) ++{ ++ at91_set_gpio_value(GREEN_LED, 1); ++} ++ ++void coloured_LED_init(void) ++{ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA); ++ ++ at91_set_gpio_output(RED_LED, 1); ++ at91_set_gpio_output(GREEN_LED, 1); ++ ++ at91_set_gpio_value(RED_LED, 0); ++ at91_set_gpio_value(GREEN_LED, 1); ++} +Index: board/atmel/at91sam9g20ek/partition.c +=================================================================== +--- a/board/atmel/at91sam9g20ek/partition.c (.../u-boot-1.3.4) (revision 0) ++++ b/board/atmel/at91sam9g20ek/partition.c (.../u-boot-1.3.4-exp) (revision 8417) +@@ -0,0 +1,40 @@ ++/* ++ * (C) Copyright 2008 ++ * Ulf Samuelsson ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++#include ++#include ++#include ++#include ++ ++AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; ++ ++struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = { ++ {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ ++ {CFG_DATAFLASH_LOGIC_ADDR_CS1, 1} ++}; ++ ++/*define the area offsets*/ ++dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { ++ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, ++ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, ++ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, ++ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"}, ++ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, ++}; +Index: board/atmel/at91sam9g20ek/config.mk +=================================================================== +--- a/board/atmel/at91sam9g20ek/config.mk (.../u-boot-1.3.4) (revision 0) ++++ b/board/atmel/at91sam9g20ek/config.mk (.../u-boot-1.3.4-exp) (revision 8417) +@@ -0,0 +1 @@ ++TEXT_BASE = 0x23f00000 +Index: board/atmel/at91sam9g20ek/Makefile +=================================================================== +--- a/board/atmel/at91sam9g20ek/Makefile (.../u-boot-1.3.4) (revision 0) ++++ b/board/atmel/at91sam9g20ek/Makefile (.../u-boot-1.3.4-exp) (revision 8417) +@@ -0,0 +1,57 @@ ++# ++# (C) Copyright 2003-2008 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# (C) Copyright 2008 ++# Stelian Pop ++# Lead Tech Design ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).a ++ ++COBJS-y += at91sam9g20ek.o ++COBJS-y += led.o ++COBJS-y += partition.o ++COBJS-$(CONFIG_CMD_NAND) += nand.o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS-y)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak $(obj).depend ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +Index: include/asm-arm/arch-at91/hardware.h +=================================================================== +--- a/include/asm-arm/arch-at91/hardware.h (.../u-boot-1.3.4) (revision 8417) ++++ b/include/asm-arm/arch-at91/hardware.h (.../u-boot-1.3.4-exp) (revision 8417) +@@ -18,7 +18,7 @@ + + #if defined(CONFIG_AT91RM9200) + #include +-#elif defined(CONFIG_AT91SAM9260) ++#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20) + #include + #define AT91_BASE_EMAC AT91SAM9260_BASE_EMAC + #define AT91_BASE_SPI AT91SAM9260_BASE_SPI0 +diff -urN u-boot-2008.10-0rig/include/asm-arm/mach-types.h u-boot-2008.10/include/asm-arm/mach-types.h +--- u-boot-2008.10-0rig/include/asm-arm/mach-types.h 2008-10-18 21:30:31.000000000 +0200 ++++ u-boot-2008.10/include/asm-arm/mach-types.h 2008-12-28 23:40:55.000000000 +0100 +@@ -23998,6 +23998,18 @@ + # define machine_is_geneva() (0) + #endif + ++#ifdef CONFIG_MACH_AT91SAM9G20EK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91SAM9G20EK ++# endif ++# define machine_is_at91sam9g20ek() (machine_arch_type == MACH_TYPE_AT91SAM9G20EK) ++#else ++# define machine_is_at91sam9g20ek() (0) ++#endif ++ + /* + * These have not yet been registered + */ +diff -urN u-boot-2008.10-0rig/board/atmel/at91sam9g20ek/at91sam9g20ek.c u-boot-2008.10/board/atmel/at91sam9g20ek/at91sam9g20ek.c +--- u-boot-2008.10-0rig/board/atmel/at91sam9g20ek/at91sam9g20ek.c 2008-12-28 14:09:52.000000000 +0100 ++++ u-boot-2008.10/board/atmel/at91sam9g20ek/at91sam9g20ek.c 2008-12-28 23:56:09.000000000 +0100 +@@ -248,3 +248,13 @@ + #endif + } + #endif ++ ++int board_eth_init(bd_t *bis) ++{ ++ int rc = 0; ++#ifdef CONFIG_MACB ++ rc = macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); ++#endif ++ return rc; ++} ++ -- cgit v1.2.3