diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile --- linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile 2004-02-13 01:03:35.000000000 +0100 +++ linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile 2004-02-13 10:04:07.000000000 +0100 @@ -16,7 +16,7 @@ all: au1000.o O_TARGET := au1000.o -export-objs = prom.o clocks.o power.o usbdev.o +export-objs = prom.o clocks.o power.o usbdev.o setup.o obj-y := prom.o int-handler.o dma.o irq.o puts.o time.o reset.o \ clocks.o power.o setup.o sleeper.o diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/pci_fixup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/pci_fixup.c --- linux-2.4.25-rc2_org/arch/mips/au1000/common/pci_fixup.c 2004-02-13 01:03:35.000000000 +0100 +++ linux-2.4.25-rc2_q/arch/mips/au1000/common/pci_fixup.c 2004-02-13 10:09:43.000000000 +0100 @@ -105,42 +105,8 @@ void __init pcibios_fixup(void) void __init pcibios_fixup_irqs(void) { -#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 ) - unsigned int slot, func; - unsigned char pin; - struct pci_dev *dev; - - pci_for_each_dev(dev) { - if (dev->bus->number != 0) - return; - - dev->irq = 0xff; - slot = PCI_SLOT(dev->devfn); -#if defined( CONFIG_SOC_AU1500 ) - switch (slot) { - case 12: - case 13: - default: - dev->irq = AU1000_PCI_INTA; - break; - } -#elif defined( CONFIG_SOC_AU1550 ) - switch (slot) { - default: - case 12: - dev->irq = AU1000_PCI_INTA; - break; - case 13: - dev->irq = AU1000_PCI_INTB; - break; - } -#endif - - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - DBG("slot %d irq %d\n", slot, dev->irq); - } -#endif } + unsigned int pcibios_assign_all_busses(void) { return 0; diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c --- linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c 2004-02-13 01:03:32.000000000 +0100 +++ linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c 2004-02-13 10:07:12.000000000 +0100 @@ -81,7 +81,7 @@ void prom_init_cmdline(void) } -char *prom_getenv(char *envname) +char *prom_getenv_n(char *envname, int n) { /* * Return a pointer to the given environment variable. @@ -89,19 +89,24 @@ char *prom_getenv(char *envname) */ t_env_var *env = (t_env_var *)prom_envp; - int i; + int i, j=0; i = strlen(envname); while(env->name) { if(strncmp(envname, env->name, i) == 0) { - return(env->name + strlen(envname) + 1); + if(j++ == n) return(env->name + strlen(envname) + 1); } env++; } return(NULL); } +char *prom_getenv(char *envname) +{ + return prom_getenv_n(envname, 0); +} + inline unsigned char str2hexnum(unsigned char c) { if(c >= '0' && c <= '9') @@ -128,18 +133,18 @@ inline void str2eaddr(unsigned char *ea, } } -int get_ethernet_addr(char *ethernet_addr) +int get_ethernet_addr_n(char *ethernet_addr, int n) { char *ethaddr_str; - ethaddr_str = prom_getenv("ethaddr"); + ethaddr_str = prom_getenv_n("ethaddr", n); if (!ethaddr_str) { printk("ethaddr not set in boot prom\n"); return -1; } str2eaddr(ethernet_addr, ethaddr_str); -#if 0 +#if 1 { int i; @@ -153,7 +158,13 @@ int get_ethernet_addr(char *ethernet_add return 0; } +int get_ethernet_addr(char *ethernet_addr) +{ + return get_ethernet_addr_n(ethernet_addr, 0); +} + void prom_free_prom_memory (void) {} +EXPORT_SYMBOL(get_ethernet_addr_n); EXPORT_SYMBOL(prom_getcmdline); EXPORT_SYMBOL(get_ethernet_addr); EXPORT_SYMBOL(str2eaddr); diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c --- linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c 2004-02-13 01:03:31.000000000 +0100 +++ linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c 2004-02-13 10:04:07.000000000 +0100 @@ -57,6 +57,7 @@ extern struct ide_ops *ide_ops; #endif extern struct rtc_ops no_rtc_ops; +void (*__wbflush) (void); extern char * __init prom_getcmdline(void); extern void __init board_setup(void); extern void au1000_restart(char *); @@ -71,6 +72,11 @@ static phys_t au1500_fixup_bigphys_addr( extern void au1xxx_time_init(void); extern void au1xxx_timer_setup(void); +void au1500_wbflush(void) +{ + __asm__ volatile ("sync"); +} + void __init au1x00_setup(void) { char *argptr; @@ -89,6 +95,8 @@ void __init au1x00_setup(void) } #endif + __wbflush = au1500_wbflush; + #ifdef CONFIG_FB_AU1100 if ((argptr = strstr(argptr, "video=")) == NULL) { argptr = prom_getcmdline(); @@ -215,3 +223,6 @@ static phys_t au1500_fixup_bigphys_addr( return phys_addr; } #endif + +EXPORT_SYMBOL(__wbflush); + diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/pb1500/irqmap.c linux-2.4.25-rc2_q/arch/mips/au1000/pb1500/irqmap.c --- linux-2.4.25-rc2_org/arch/mips/au1000/pb1500/irqmap.c 2004-02-13 01:03:28.000000000 +0100 +++ linux-2.4.25-rc2_q/arch/mips/au1000/pb1500/irqmap.c 2004-02-13 10:10:21.000000000 +0100 @@ -76,6 +76,7 @@ au1xxx_irq_map_t au1xxx_irq_map[] = { { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_206, INTC_INT_FALL_EDGE, 0 }, { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 }, { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 }, diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/kernel/head.S linux-2.4.25-rc2_q/arch/mips/kernel/head.S --- linux-2.4.25-rc2_org/arch/mips/kernel/head.S 2004-02-13 01:02:42.000000000 +0100 +++ linux-2.4.25-rc2_q/arch/mips/kernel/head.S 2004-02-13 10:07:43.000000000 +0100 @@ -33,7 +33,9 @@ * Reserved space for exception handlers. * Necessary for machines which link their kernels at KSEG0. */ - .fill 0x400 + j kernel_entry + nop + .org 0x400 /* The following two symbols are used for kernel profiling. */ EXPORT(stext) diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/Makefile linux-2.4.25-rc2_q/arch/mips/Makefile --- linux-2.4.25-rc2_org/arch/mips/Makefile 2004-02-13 01:01:00.000000000 +0100 +++ linux-2.4.25-rc2_q/arch/mips/Makefile 2004-04-09 10:40:09.000000000 +0200 @@ -69,13 +69,13 @@ endif set_gccflags = $(shell \ while :; do \ cpu=$(1); isa=-$(2); \ - for gcc_opt in -march= -mcpu=; do \ + for gcc_opt in -march=; do \ $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \ -xc /dev/null > /dev/null 2>&1 && \ break 2; \ done; \ cpu=$(3); isa=-$(4); \ - for gcc_opt in -march= -mcpu=; do \ + for gcc_opt in -march=; do \ $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \ -xc /dev/null > /dev/null 2>&1 && \ break 2; \ @@ -90,7 +90,7 @@ else \ fi; \ gas_abi=-Wa,-32; gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \ while :; do \ - for gas_opt in -Wa,-march= -Wa,-mcpu=; do \ + for gas_opt in -Wa,-march=; do \ $(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \ -o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \ break 2; \ diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c --- linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c 2004-02-12 23:51:10.000000000 +0100 +++ linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c 2004-02-13 10:11:06.000000000 +0100 @@ -29,6 +29,7 @@ #include #include #include +#include void kbd_leds(unsigned char leds) { @@ -140,3 +141,46 @@ void __init kbd_init_hw(void) { printk("Dummy keyboard driver installed.\n"); } + + +void panic_blink(void) + { + } + + + int pckbd_translate(unsigned char scancode, unsigned char *keycode, + char raw_mode) + { + return 0; + } + + char pckbd_unexpected_up(unsigned char keycode) + { + return 0; + } + + + void pckbd_leds(unsigned char leds) + { + } + + + int pckbd_setkeycode(unsigned int scancode, unsigned int keycode) + { + return 0; + } + + int pckbd_getkeycode(unsigned int scancode) + { + return 0; + } + + void __init pckbd_init_hw(void) + { + } + + int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data) + { + return 0; + } + diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/Makefile linux-2.4.25-rc2_q/drivers/char/Makefile --- linux-2.4.25-rc2_org/drivers/char/Makefile 2004-02-12 23:50:40.000000000 +0100 +++ linux-2.4.25-rc2_q/drivers/char/Makefile 2004-02-13 10:11:06.000000000 +0100 @@ -32,7 +32,7 @@ mod-subdirs := joystick ftape drm drm-4. list-multi := KEYMAP =defkeymap.o -KEYBD =pc_keyb.o +KEYBD =dummy_keyb.o CONSOLE =console.o SERIAL =serial.o diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c --- linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c 2004-02-13 00:49:45.000000000 +0100 +++ linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c 2004-03-16 10:04:18.000000000 +0100 @@ -511,7 +511,7 @@ static int do_write_oneword(struct map_i or tells us why it failed. */ dq6 = CMD(1<<6); dq5 = CMD(1<<5); - timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */ + timeo = jiffies + HZ; /* setting timeout to 1ms for now */ oldstatus = cfi_read(map, adr); status = cfi_read(map, adr); @@ -540,9 +540,7 @@ static int do_write_oneword(struct map_i oldstatus = cfi_read(map, adr); status = cfi_read(map, adr); - if ( (oldstatus & 0x00FF) == (status & 0x00FF) ) { - printk(KERN_WARNING "Warning: DQ5 raised while program operation was in progress, however operation completed OK\n" ); - } else { + if ( (oldstatus & 0x00FF) != (status & 0x00FF) ) { /* DQ5 is active so we can do a reset and stop the erase */ cfi_write(map, CMD(0xF0), chip->start); printk(KERN_WARNING "Internal flash device timeout occurred or write operation was performed while flash was programming.\n" ); diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c --- linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c 2004-02-13 00:50:09.000000000 +0100 +++ linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c 2004-02-13 10:11:40.000000000 +0100 @@ -86,28 +86,24 @@ static int mtd_parts_n #else static struct mtd_partition physmap_partitions[] = { /* Put your own partition definitions here */ -#if 0 { - name: "bootROM", - size: 0x80000, + name: "fs1", + size: 28*1024*1024, offset: 0, - mask_flags: MTD_WRITEABLE, /* force read-only */ }, { - name: "zImage", - size: 0x100000, + name: "bootldr", + size: 128*1024, offset: MTDPART_OFS_APPEND, mask_flags: MTD_WRITEABLE, /* force read-only */ }, { - name: "ramdisk.gz", - size: 0x300000, + name: "kernel", + size: 1*1024*1024, offset: MTDPART_OFS_APPEND, - mask_flags: MTD_WRITEABLE, /* force read-only */ }, { - name: "User FS", + name: "fs2", size: MTDPART_SIZ_FULL, offset: MTDPART_OFS_APPEND, } -#endif }; #define NUM_PARTITIONS (sizeof(physmap_partitions)/sizeof(struct mtd_partition)) diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/au1000_eth.c linux-2.4.25-rc2_q/drivers/net/au1000_eth.c --- linux-2.4.25-rc2_org/drivers/net/au1000_eth.c 2004-02-12 23:33:59.000000000 +0100 +++ linux-2.4.25-rc2_q/drivers/net/au1000_eth.c 2004-02-13 10:06:01.000000000 +0100 @@ -97,6 +97,7 @@ extern int get_ethernet_addr(char *ether extern inline void str2eaddr(unsigned char *ea, unsigned char *str); extern inline unsigned char str2hexnum(unsigned char c); extern char * __init prom_getcmdline(void); +extern int get_ethernet_addr_n(char *ethernet_addr, int n); /* * Theory of operation @@ -591,6 +592,99 @@ int ks8995m_status(struct net_device *de return 0; } +int ns_83847_reset(struct net_device *dev, int phy_addr) + { + s16 mii_control, timeout; + + // printk("ns_reset\n"); + mii_control = mdio_read(dev, phy_addr, MII_CONTROL); + mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET); + mdelay(1); + for (timeout = 100; timeout > 0; --timeout) { + mii_control = mdio_read(dev, phy_addr, MII_CONTROL); + if ((mii_control & MII_CNTL_RESET) == 0) + break; + mdelay(1); + } + if (mii_control & MII_CNTL_RESET) { + printk(KERN_ERR "%s PHY reset timeout !\n", dev->name); + return -1; + } + return 0; + } + +int ns_83847_init(struct net_device *dev, int phy_addr) + { + s16 data; + // printk("ns_init\n"); + + /* Stop auto-negotiation */ + // data = mdio_read(dev, phy_addr, MII_CONTROL); + // mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO); + // mdio_write(dev, phy_addr, 0, 0x0000); + mdio_write(dev, phy_addr, MII_CONTROL, MII_CNTL_F100 /* | MII_CNTL_FDX */); + + /* Set advertisement to 10/100 and Half/Full duplex (full capabilities) */ + data = mdio_read(dev, phy_addr, MII_ANADV); + /* obs PAUSE bit */ + data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; /* MII_NWAY_T4 not sopported */ ; + mdio_write(dev, phy_addr, MII_ANADV, data); + + /* Bypass led stretching? */ + data = mdio_read(dev, phy_addr, MII_NS_PHYCTRL); + data |= MII_NS_PHYCTRL_BP_STRETCH; + mdio_write(dev, phy_addr, MII_NS_PHYCTRL, data); + + /* Restart auto-negotiation */ + data = mdio_read(dev, phy_addr, MII_CONTROL); + data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO; + mdio_write(dev, phy_addr, MII_CONTROL, data); + + return 0; + } + +int ns_83847_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed) + { + u16 mii_data; + struct au1000_private *aup; + + if (!dev) { + printk(KERN_ERR "ns_83847_status error: NULL dev\n"); + return -1; + } + aup = (struct au1000_private *) dev->priv; + + mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS); + // printk("ns_status: %04x\n", mii_data); + if (mii_data & MII_STAT_LINK) { + *link = 1; + mii_data = mdio_read(dev, aup->phy_addr, MII_NS_PHYSTS); + if (mii_data & MII_NS_PHYSTS_SPEED_10) { + *speed = IF_PORT_10BASET; + dev->if_port = IF_PORT_10BASET; + } + else { + if (mii_data & MII_NS_PHYSTS_DUPLEX_FULL) { + *speed = IF_PORT_100BASEFX; + dev->if_port = IF_PORT_100BASEFX; + } + else { + *speed = IF_PORT_100BASETX; + dev->if_port = IF_PORT_100BASETX; + } + } + + } + else { + *link = 0; + *speed = 0; + dev->if_port = IF_PORT_UNKNOWN; + } + return 0; + } + + + #ifdef CONFIG_MIPS_BOSPORUS int stub_init(struct net_device *dev, int phy_addr) { @@ -616,6 +710,12 @@ stub_status(struct net_device *dev, int } #endif +struct phy_ops ns_83847_ops = { + ns_83847_init, + ns_83847_reset, + ns_83847_status, +}; + struct phy_ops bcm_5201_ops = { bcm_5201_init, bcm_5201_reset, @@ -667,6 +767,7 @@ static struct mii_chip_info { struct phy_ops *phy_ops; int dual_phy; } mii_chip_table[] = { + {"Natsemi DP83847 PHY", 0x2000, 0x5c30, &ns_83847_ops }, {"Broadcom BCM5201 10/100 BaseT PHY",0x0040,0x6212, &bcm_5201_ops,0}, {"Broadcom BCM5221 10/100 BaseT PHY",0x0040,0x61e4, &bcm_5201_ops,0}, {"Broadcom BCM5222 10/100 BaseT PHY",0x0040,0x6322, &bcm_5201_ops,1}, @@ -868,6 +969,8 @@ static int mii_probe (struct net_device } } } + printk(KERN_ERR "%s: Au1x No MII transceivers found!\n", dev->name); + return -1; found: #ifdef CONFIG_MIPS_BOSPORUS @@ -1176,21 +1279,10 @@ au1000_probe(u32 ioaddr, int irq, int po switch (ioaddr) { case AU1000_ETH0_BASE: case AU1500_ETH0_BASE: - /* check env variables first */ if (!get_ethernet_addr(ethaddr)) { memcpy(au1000_mac_addr, ethaddr, sizeof(dev->dev_addr)); } else { - /* Check command line */ - argptr = prom_getcmdline(); - if ((pmac = strstr(argptr, "ethaddr=")) == NULL) { - printk(KERN_INFO "%s: No mac address found\n", - dev->name); - /* use the hard coded mac addresses */ - } else { - str2eaddr(ethaddr, pmac + strlen("ethaddr=")); - memcpy(au1000_mac_addr, ethaddr, - sizeof(dev->dev_addr)); - } + printk(KERN_INFO "%s: No mac address found\n", dev->name); } if (ioaddr == AU1000_ETH0_BASE) aup->enable = (volatile u32 *) @@ -1206,6 +1298,11 @@ au1000_probe(u32 ioaddr, int irq, int po case AU1000_ETH1_BASE: case AU1500_ETH1_BASE: + if (!get_ethernet_addr_n(ethaddr, 1)) { + memcpy(au1000_mac_addr, ethaddr, sizeof(dev->dev_addr)); + } else { + printk(KERN_INFO "%s: No mac address found\n", dev->name); + } if (ioaddr == AU1000_ETH1_BASE) aup->enable = (volatile u32 *) ((unsigned long)AU1000_MAC1_ENABLE); @@ -1213,7 +1310,6 @@ au1000_probe(u32 ioaddr, int irq, int po aup->enable = (volatile u32 *) ((unsigned long)AU1500_MAC1_ENABLE); memcpy(dev->dev_addr, au1000_mac_addr, sizeof(dev->dev_addr)); - dev->dev_addr[4] += 0x10; setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR); aup->mac_id = 1; au_macs[1] = aup; diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/au1000_eth.h linux-2.4.25-rc2_q/drivers/net/au1000_eth.h --- linux-2.4.25-rc2_org/drivers/net/au1000_eth.h 2004-02-12 23:33:54.000000000 +0100 +++ linux-2.4.25-rc2_q/drivers/net/au1000_eth.h 2004-02-13 10:06:01.000000000 +0100 @@ -86,6 +86,28 @@ #define MII_STAT_CAN_TX_FDX 0x4000 #define MII_STAT_CAN_T4 0x8000 +/* mii registers for NS 83847 */ +#define MII_NS_PHYSTS 0x10 +#define MII_NS_FCSCR 0x14 +#define MII_NS_RECR 0x15 +#define MII_NS_PCSR 0x16 +#define MII_NS_PHYCTRL 0x19 +#define MII_NS_10BTSCR 0x1a +#define MII_NS_CDCTRL 0x1b + +/* MII_NS_PHYSTS bits */ +#define MII_NS_PHYSTS_LINK (1) +#define MII_NS_PHYSTS_SPEED_10 (1<<1) +#define MII_NS_PHYSTS_DUPLEX_FULL (1<<2) + +/* MII_NS_PHYCTRL bits */ +#define MII_NS_PHYCTRL_BP_STRETCH (1<<8) + +/* MII_NS_CDCTRL bits */ +#define MII_NS_CDCTRL_CD_ENABLE (1<<15) +#define MII_NS_CDCTRL_RISETIME (1<<11) +#define MII_NS_CDCTRL_FALLTIME (1<<9) + #define MII_ID1_OUI_LO 0xFC00 /* low bits of OUI mask */ #define MII_ID1_MODEL 0x03F0 /* model number */ diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/natsemi.c linux-2.4.25-rc2_q/drivers/net/natsemi.c --- linux-2.4.25-rc2_org/drivers/net/natsemi.c 2004-02-12 23:29:19.000000000 +0100 +++ linux-2.4.25-rc2_q/drivers/net/natsemi.c 2004-04-22 09:28:51.000000000 +0200 @@ -773,7 +773,11 @@ static int __devinit natsemi_probe1 (str goto err_ioremap; } - /* Work around the dropped serial bit. */ +#ifdef __mips__ + if (get_ethernet_addr_n(dev->dev_addr, 2)) { + printk(KERN_INFO "%s: No mac address found\n", dev->name); + } +#else prev_eedata = eeprom_read(ioaddr, 6); for (i = 0; i < 3; i++) { int eedata = eeprom_read(ioaddr, i + 7); @@ -781,6 +785,7 @@ static int __devinit natsemi_probe1 (str dev->dev_addr[i*2+1] = eedata >> 7; prev_eedata = eedata; } +#endif dev->base_addr = ioaddr; dev->irq = irq; diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h --- linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h 2004-02-12 23:47:43.000000000 +0100 +++ linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h 2004-02-13 10:13:40.000000000 +0100 @@ -302,9 +302,9 @@ typedef struct hermes_response { #define hermes_read_reg(hw, off) ((hw)->io_space ? \ inw((hw)->iobase + ( (off) << (hw)->reg_spacing )) : \ readw((hw)->iobase + ( (off) << (hw)->reg_spacing ))) -#define hermes_write_reg(hw, off, val) ((hw)->io_space ? \ - outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )) : \ - writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing ))) +#define hermes_write_reg(hw, off, val) { if((hw)->io_space) \ + outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )); else \ + writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing ));} #define hermes_read_regn(hw, name) (hermes_read_reg((hw), HERMES_##name)) #define hermes_write_regn(hw, name, val) (hermes_write_reg((hw), HERMES_##name, (val))) diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/au1000.h linux-2.4.25-rc2_q/include/asm-mips/au1000.h --- linux-2.4.25-rc2_org/include/asm-mips/au1000.h 2004-02-12 23:06:31.000000000 +0100 +++ linux-2.4.25-rc2_q/include/asm-mips/au1000.h 2004-02-13 10:41:49.000000000 +0100 @@ -283,14 +283,14 @@ extern au1xxx_irq_map_t au1xxx_irq_map[] #define INTC_INT_HIGH_AND_LOW_LEVEL 0x7 /* Interrupt Numbers */ -#define AU1000_UART0_INT 0 +#define AU1000_UART0_INT 3 #define AU1000_UART1_INT 1 /* au1000 */ #define AU1000_UART2_INT 2 /* au1000 */ #define AU1000_PCI_INTA 1 /* au1500 */ #define AU1000_PCI_INTB 2 /* au1500 */ -#define AU1000_UART3_INT 3 +#define AU1000_UART3_INT 0 #define AU1000_SSI0_INT 4 /* au1000 */ #define AU1000_SSI1_INT 5 /* au1000 */ @@ -693,12 +693,12 @@ extern au1xxx_irq_map_t au1xxx_irq_map[] /* UARTS 0-3 */ -#define UART0_ADDR 0xB1100000 +#define UART0_ADDR 0xB1400000 #define UART1_ADDR 0xB1200000 #define UART2_ADDR 0xB1300000 -#define UART3_ADDR 0xB1400000 +#define UART3_ADDR 0xB1100000 #define UART_BASE UART0_ADDR -#define UART_DEBUG_BASE UART3_ADDR +#define UART_DEBUG_BASE UART0_ADDR #define UART_RX 0 /* Receive buffer */ #define UART_TX 4 /* Transmit buffer */ diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/page.h linux-2.4.25-rc2_q/include/asm-mips/page.h --- linux-2.4.25-rc2_org/include/asm-mips/page.h 2004-02-12 23:06:14.000000000 +0100 +++ linux-2.4.25-rc2_q/include/asm-mips/page.h 2004-03-23 14:18:38.000000000 +0100 @@ -13,7 +13,6 @@ #include #include -#ifdef __KERNEL__ /* * PAGE_SHIFT determines the page size @@ -30,6 +29,7 @@ #define PAGE_SIZE (1L << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) +#ifdef __KERNEL__ #ifndef __ASSEMBLY__ #include diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/wbflush.h linux-2.4.25-rc2_q/include/asm-mips/wbflush.h --- linux-2.4.25-rc2_org/include/asm-mips/wbflush.h 2004-02-12 23:06:33.000000000 +0100 +++ linux-2.4.25-rc2_q/include/asm-mips/wbflush.h 2004-02-13 20:42:57.000000000 +0100 @@ -15,8 +15,11 @@ #ifdef CONFIG_CPU_HAS_WB -extern void (*__wbflush)(void); -extern void wbflush_setup(void); +//extern void (*__wbflush)(void); +//extern void wbflush_setup(void); + + +#define __wbflush() { __asm__ volatile ("sync"); } #define wbflush() \ do { \ diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/cs_types.h linux-2.4.25-rc2_q/include/pcmcia/cs_types.h --- linux-2.4.25-rc2_org/include/pcmcia/cs_types.h 2004-02-12 23:13:05.000000000 +0100 +++ linux-2.4.25-rc2_q/include/pcmcia/cs_types.h 2004-02-13 10:15:10.000000000 +0100 @@ -37,6 +37,7 @@ #endif #if defined(__arm__) || defined(__mips__) +//obs jp: on mips, "typedef unsigned long long ioaddr_t;" may be needed to support cardbus typedef u_int ioaddr_t; #else typedef u_short ioaddr_t; diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/ss.h linux-2.4.25-rc2_q/include/pcmcia/ss.h --- linux-2.4.25-rc2_org/include/pcmcia/ss.h 2004-02-12 23:13:02.000000000 +0100 +++ linux-2.4.25-rc2_q/include/pcmcia/ss.h 2004-02-13 10:15:32.000000000 +0100 @@ -112,7 +112,7 @@ typedef struct pccard_mem_map { u_char map; u_char flags; u_short speed; - u_long sys_start, sys_stop; + ioaddr_t sys_start, sys_stop; u_int card_start; } pccard_mem_map; diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/init/do_mounts.c linux-2.4.25-rc2_q/init/do_mounts.c --- linux-2.4.25-rc2_org/init/do_mounts.c 2004-02-12 22:59:08.000000000 +0100 +++ linux-2.4.25-rc2_q/init/do_mounts.c 2004-02-13 10:16:02.000000000 +0100 @@ -760,8 +760,6 @@ static void __init devfs_make_root(char static void __init mount_root(void) { #ifdef CONFIG_ROOT_NFS - if (MAJOR(ROOT_DEV) == NFS_MAJOR - && MINOR(ROOT_DEV) == NFS_MINOR) { if (mount_nfs_root()) { sys_chdir("/root"); ROOT_DEV = current->fs->pwdmnt->mnt_sb->s_dev; @@ -770,7 +768,6 @@ static void __init mount_root(void) } printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n"); ROOT_DEV = MKDEV(FLOPPY_MAJOR, 0); - } #endif devfs_make_root(root_device_name); create_dev("/dev/root", ROOT_DEV, root_device_name);