path: root/target/device/Atmel/at91bootstrap/at91bootstrap-2.3.2.patch

diff -urN at91bootstrap-2.3/board/at91sam9260ek/at91sam9260ek.c at91bootstrap-2.3.2/board/at91sam9260ek/at91sam9260ek.c
--- at91bootstrap-2.3/board/at91sam9260ek/at91sam9260ek.c	2007-03-28 16:05:09.000000000 +0200
+++ at91bootstrap-2.3.2/board/at91sam9260ek/at91sam9260ek.c	2007-08-14 23:20:24.000000000 +0200
@@ -47,7 +47,9 @@
 #ifdef CFG_DATAFLASH
 #include "../../include/dataflash.h"
 #endif
-
+#ifdef CFG_FLASH
+#include "../../include/flash.h"
+#endif
 static inline unsigned int get_cp15(void)
 {
 	unsigned int value;
@@ -129,6 +131,10 @@
 				(MASTER_CLOCK * 7)/1000000);	/* Refresh Timer Register */
 
 #endif /* CFG_SDRAM */
+
+#ifdef	CFG_FLASH
+	flash_hw_init();
+#endif
 }
 #endif /* CFG_HW_INIT */
 
@@ -221,7 +227,24 @@
 }
 #endif /* CFG_DATAFLASH */
 
+#ifdef CFG_FLASH
+
+/*------------------------------------------------------------------------------*/
+/* \fn    flash_hw_init								*/
+/* \brief This function performs Flash HW initialization			*/
+/*------------------------------------------------------------------------------*/
+void flash_hw_init(void)
+{
+	/* Configure PIOs */
+	const struct pio_desc flash_pio[] = {
+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
+	};
+
+	/* Configure the PIO controller */
+	pio_setup(flash_pio);
+}
 
+#endif /* CFG_FLASH */
 
 #ifdef CFG_NANDFLASH
 /*------------------------------------------------------------------------------*/
diff -urN at91bootstrap-2.3/board/at91sam9260ek/flash/at91sam9260ek.h at91bootstrap-2.3.2/board/at91sam9260ek/flash/at91sam9260ek.h
--- at91bootstrap-2.3/board/at91sam9260ek/flash/at91sam9260ek.h	1970-01-01 01:00:00.000000000 +0100
+++ at91bootstrap-2.3.2/board/at91sam9260ek/flash/at91sam9260ek.h	2007-08-14 22:53:58.000000000 +0200
@@ -0,0 +1,88 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2006, Atmel Corporation
+
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaiimer below.
+ *
+ * - Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the disclaimer below in the documentation and/or
+ * other materials provided with the distribution.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ * File Name           : at91sam9260ek.h
+ * Object              :
+ * Creation            : NLe Jul 13th 2006
+ *-----------------------------------------------------------------------------
+ */
+#ifndef _AT91SAM9260EK_H
+#define _AT91SAM9260EK_H
+/* ******************************************************************* */
+/* PMC Settings                                                        */
+/*                                                                     */
+/* The main oscillator is enabled as soon as possible in the c_startup */
+/* and MCK is switched on the main oscillator.                         */
+/* PLL initialization is done later in the hw_init() function          */
+/* ******************************************************************* */
+#define MASTER_CLOCK		(198656000/2)
+
+#define PLL_LOCK_TIMEOUT	1000000
+
+#define PLLA_SETTINGS	0x2060BF09
+#define PLLB_SETTINGS	0x10483F0E
+
+/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
+#define MCKR_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
+
+/* Flash settings - Use a default, which hopefully works for all AT91 chips */
+#include	"smc0_setup.h"
+
+
+/* ******************************************************************* */
+/* BootStrap Settings                                                  */
+/*                                                                     */
+/* ******************************************************************* */
+#define MACH_TYPE       	0x44B		/* AT91SAM9260-EK */
+
+#define IMG_ADDRESS 		0x8000		/* Image Address in Flash */
+
+#if	defined(IMG_SIZE)
+#warning			"IMG_SIZE redefined"
+#else
+#define	IMG_SIZE		0x38000		/* Image Size in Flash    */
+#endif
+
+#if	defined(JUMP_ADDR)
+#warning			"JUMP_ADDR redefined"
+#else
+#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
+#endif
+
+/* ******************************************************************* */
+/* Application Settings                                                */
+/* ******************************************************************* */
+#define CFG_DEBUG
+#define CFG_FLASH
+#define	CFG_SDRAM
+#define	CFG_HW_INIT
+
+#endif	/* _AT91SAM9260EK_H */
diff -urN at91bootstrap-2.3/crt0_gnu.S at91bootstrap-2.3.2/crt0_gnu.S
--- at91bootstrap-2.3/crt0_gnu.S	2006-12-05 11:27:24.000000000 +0100
+++ at91bootstrap-2.3.2/crt0_gnu.S	2007-08-14 23:23:49.000000000 +0200
@@ -84,6 +84,13 @@
 _init_stack:
 	ldr     sp,=TOP_OF_MEM
 
+/* Initialize the SMC BEFORE we change the clock */
+#ifdef	CFG_FLASH
+	ldr     r4, = smc0_hw_init
+	mov     lr, pc
+	bx      r4
+#endif
+
 /* Test if main oscillator is enabled */
 	ldr 	r0,=AT91C_PMC_SR
 	ldr 	r1, [r0]
diff -urN at91bootstrap-2.3/driver/driver.mk at91bootstrap-2.3.2/driver/driver.mk
--- at91bootstrap-2.3/driver/driver.mk	2007-03-25 16:24:08.000000000 +0200
+++ at91bootstrap-2.3.2/driver/driver.mk	2007-08-14 21:17:53.000000000 +0200
@@ -1,10 +1,11 @@
 # Makefile for AT91-Bootstrap drivers directory
 
-COBJS-y								+=	driver/debug.o
-COBJS-y								+=	driver/gpio.o
-COBJS-y								+=	driver/pmc.o
-COBJS-y								+=	driver/sdramc.o
-COBJS-y								+=	driver/string.o
-COBJS-y								+=	driver/udiv.o
-COBJS-$(CONFIG_NANDFLASH)		+=	driver/nandflash.o
-COBJS-$(CONFIG_DATAFLASH)			+=	driver/dataflash.o
+COBJS-y				+=	driver/debug.o
+COBJS-y				+=	driver/gpio.o
+COBJS-y				+=	driver/pmc.o
+COBJS-y				+=	driver/sdramc.o
+COBJS-y				+=	driver/string.o
+COBJS-y				+=	driver/udiv.o
+COBJS-$(CONFIG_NANDFLASH)	+=	driver/nandflash.o
+COBJS-$(CONFIG_DATAFLASH)	+=	driver/dataflash.o
+COBJS-$(CONFIG_FLASH)		+=	driver/flash.o
diff -urN at91bootstrap-2.3/driver/flash.c at91bootstrap-2.3.2/driver/flash.c
--- at91bootstrap-2.3/driver/flash.c	1970-01-01 01:00:00.000000000 +0100
+++ at91bootstrap-2.3.2/driver/flash.c	2007-08-14 23:20:29.000000000 +0200
@@ -0,0 +1,132 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2007, Atmel Corporation
+
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaiimer below.
+ *
+ * - Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the disclaimer below in the documentation and/or
+ * other materials provided with the distribution.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ * File Name           : flash.c
+ * Object              : Flash High level functions
+ * Creation            : USa Aug 14th 2007
+ *---------------------------------------------------------------------------
+*/
+
+#include "../include/part.h"
+#include "../include/main.h"
+#include "../include/flash.h"
+#include "../include/smc.h"
+#include <stdlib.h>
+
+#ifdef CFG_FLASH
+
+/*------------------------------------------------------------------------------*/
+/* \fn    smc0_hw_init								*/
+/* \brief This function performs Static Memory Controller HW initialization	*/
+/* It should be executed BEFORE the slow clock is changed			*/
+/* WARNING: The C_Startup has done VERY LITTLE at this point			*/
+/*------------------------------------------------------------------------------*/
+void smc0_hw_init(void)
+{
+	/* The SMC is either clocked by the Slow clock or by MCLK
+	 * MCLK is typically 100 MHz
+	 */
+
+unsigned int	setup0,pulse0,cycle0,mode0;
+
+	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) |DATABUS_PULLUP_ON|MEMORY_VOLTAGE_3_3V , AT91C_BASE_CCFG + CCFG_EBICSA);
+
+	/* Check : SETUP + PULSE <= CYCLE ! */
+
+	setup0	=	
+		((NCS_READ_SETUP & 0x3F)	<< 24)	|	// (128 * bit[5]) + bit[4:0]
+		((NRD_SETUP	 & 0x3F)	<< 16)	|	// (128 * bit[5]) + bit[4:0]
+		((NCS_WR_SETUP	 & 0x3F)	<<  8)	|	// (128 * bit[5]) + bit[4:0]
+		((NWE_SETUP	 & 0x3F)	<<  0);		// (128 * bit[5]) + bit[4:0]
+	writel(setup0, AT91C_BASE_SMC + SMC_SETUP0);
+	
+	pulse0	= 
+		((NCS_READ_PULSE & 0x3F)	<< 24)	|	// (128 * bit[5]) + bit[4:0]
+		((NRD_PULSE	 & 0x3F)	<< 16)	|	// (128 * bit[5]) + bit[4:0]
+		((NCS_WR_PULSE	 & 0x3F)	<<  8)	|	// (128 * bit[5]) + bit[4:0]
+		((NWE_PULSE	 & 0x3F)	<<  0);		// (128 * bit[5]) + bit[4:0]
+	writel(pulse0, AT91C_BASE_SMC + SMC_PULSE0);
+
+	cycle0	= 
+		((NRD_CYCLE	 & 0x1FF)	<< 16)	|	// (256 * bit[8:7]) + bit[6:0]
+		((NWE_CYCLE	 & 0x1FF)	<<  0);		// (256 * bit[8:7]) + bit[6:0]
+	writel(cycle0, AT91C_BASE_SMC + SMC_CYCLE0);
+
+	mode0	= (PS|PMEN|TDF_MODE|TDF_CYCLES|DBW|BAT|EXNW_MODE|WRITE_MODE|READ_MODE);
+	writel(mode0, AT91C_BASE_SMC + SMC_CTRL0);
+}
+
+/*------------------------------------------------------------------------------*/
+/* \fn    flash_is_boot_valid							*/
+/* \brief Check that the first bytes of the buffer are valid ARM vectors	*/
+/*------------------------------------------------------------------------------*/
+static unsigned int flash_is_boot_valid(unsigned char *buffer)
+{
+	int i = 3;
+
+ 	/* Verify if the 28 first bytes of the sram correspond to ARM vectors
+	   The sixth ARM vector contain the size of the code */
+    	while(i < 28)
+    	{
+		if (i != 23)
+		{
+			if ((buffer[i] != 0xEA) && (buffer[i] != 0xE5) )
+				return -1;
+		}
+		i+=4;
+    	}
+
+    	return 0;
+}
+
+/*------------------------------------------------------------------------------*/
+/* \fn    load_flash								*/
+/* \brief This function loads flash content to specified address		*/
+/*------------------------------------------------------------------------------*/	
+int load_flash(unsigned int img_addr, unsigned int img_size, unsigned int img_dest)
+{
+	unsigned char *src, *dst;
+	src = (unsigned char *) img_addr;
+	dst = (unsigned char *) img_dest;
+
+	flash_hw_init();
+
+	if (flash_is_boot_valid((unsigned char*)img_addr))
+		return -1;
+
+	while (img_size > 0) {
+		*dst++ = *src++;
+		img_size--;
+	}
+   	return 0;
+}
+
+#endif /* CFG_FLASH */
diff -urN at91bootstrap-2.3/include/AT91SAM9260_inc.h at91bootstrap-2.3.2/include/AT91SAM9260_inc.h
--- at91bootstrap-2.3/include/AT91SAM9260_inc.h	2006-12-05 11:27:20.000000000 +0100
+++ at91bootstrap-2.3.2/include/AT91SAM9260_inc.h	2007-08-14 23:05:19.000000000 +0200
@@ -463,7 +463,7 @@
 #define 	AT91C_EBI_CS5A_SMC                  (0x0 <<  5) // (CCFG) Chip Select 5 is only assigned to the Static Memory Controller and NCS5 behaves as defined by the SMC
 #define 	AT91C_EBI_CS5A_CF                   (0x1 <<  5) // (CCFG) Chip Select 5 is assigned to the Static Memory Controller and the CompactFlash Logic (second slot) is activated.
 #define AT91C_EBI_DBPUC           (0x1 <<  8) // (CCFG) Data Bus Pull-up Configuration
-
+#define	AT91C_EBI_VDDIOMSEL	  (0x1 << 16)
 // *****************************************************************************
 //              SOFTWARE API DEFINITION  FOR Peripheral DMA Controller
 // *****************************************************************************
diff -urN at91bootstrap-2.3/include/flash.h at91bootstrap-2.3.2/include/flash.h
--- at91bootstrap-2.3/include/flash.h	1970-01-01 01:00:00.000000000 +0100
+++ at91bootstrap-2.3.2/include/flash.h	2007-08-14 23:20:11.000000000 +0200
@@ -0,0 +1,41 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2007, Atmel Corporation
+
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaiimer below.
+ *
+ * - Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the disclaimer below in the documentation and/or
+ * other materials provided with the distribution.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ * File Name           : flash.h
+ * Object              : ATMEL Flash Header File
+ * Creation            : USa Aug 14th 2007
+ *---------------------------------------------------------------------------
+*/
+#ifndef _FLASH_H
+#define _FLASH_H
+extern void flash_hw_init(void);
+extern int load_flash(unsigned int img_addr, unsigned int img_size, unsigned int img_dest);
+#endif
diff -urN at91bootstrap-2.3/include/smc0_setup.h at91bootstrap-2.3.2/include/smc0_setup.h
--- at91bootstrap-2.3/include/smc0_setup.h	1970-01-01 01:00:00.000000000 +0100
+++ at91bootstrap-2.3.2/include/smc0_setup.h	2007-08-14 22:54:21.000000000 +0200
@@ -0,0 +1,32 @@
+/* ******************************************************************* */
+/* SMC0 Settings                                                       */
+/* We use this as a default for all				       */
+/* ******************************************************************* */
+
+#ifndef _SMC0_SETUP_H
+#define _SMC0_SETUP_H
+
+#define	NCS_READ_SETUP	_ns(10)
+#define	NRD_SETUP	_ns(20)
+#define	NCS_WR_SETUP	_ns(10)
+#define	NWE_SETUP	_ns(20)
+
+#define	NCS_READ_PULSE	_ns(100)
+#define	NRD_PULSE	_ns(100)
+#define	NCS_WR_PULSE	_ns(100)
+#define	NWE_PULSE	_ns(100)
+
+#define	NRD_CYCLE	_ns(140)
+#define	NWE_CYCLE	_ns(140)
+
+#define PS		AT91C_SMC_PS_SIZE_SIXTEEN_BYTES
+#define PMEN		PAGE_MODE_OFF
+#define TDF_MODE	TDF_OPTIMIZATION_OFF
+#define TDF_CYCLES	_ns(60)
+#define DBW		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS
+#define BAT		AT91C_SMC_BAT_BYTE_SELECT
+#define EXNW_MODE	AT91C_SMC_NWAITM_NWAIT_DISABLE
+#define WRITE_MODE	CONTROLLED_BY_NWE
+#define READ_MODE	CONTROLLED_BY_NRD
+
+#endif
diff -urN at91bootstrap-2.3/include/smc.h at91bootstrap-2.3.2/include/smc.h
--- at91bootstrap-2.3/include/smc.h	1970-01-01 01:00:00.000000000 +0100
+++ at91bootstrap-2.3.2/include/smc.h	2007-08-14 23:05:30.000000000 +0200
@@ -0,0 +1,19 @@
+#define	MASTER_CLOCK_CYCLE	(1000000000/MASTER_CLOCK)
+#define	_ns(x)	((x)/MASTER_CLOCK_CYCLE)
+
+#define CONTROLLED_BY_NRD	AT91C_SMC_READMODE
+#define CONTROLLED_BY_NCS_RD	0
+#define CONTROLLED_BY_NWE	AT91C_SMC_WRITEMODE
+#define CONTROLLED_BY_NCS_WR	0
+
+#define TDF_OPTIMIZATION_ON	AT91C_SMC_TDFEN
+#define TDF_OPTIMIZATION_OFF	0
+
+#define PAGE_MODE_ON		AT91C_SMC_PMEN
+#define PAGE_MODE_OFF		0
+
+#define	DATABUS_PULLUP_ON	0
+#define	DATABUS_PULLUP_OFF	AT91C_EBI_DBPUC
+
+#define	MEMORY_VOLTAGE_1_8V	0
+#define	MEMORY_VOLTAGE_3_3V	AT91C_EBI_VDDIOMSEL
diff -urN at91bootstrap-2.3/main.c at91bootstrap-2.3.2/main.c
--- at91bootstrap-2.3/main.c	2006-12-05 11:27:24.000000000 +0100
+++ at91bootstrap-2.3.2/main.c	2007-08-14 21:15:38.000000000 +0200
@@ -38,6 +38,7 @@
 #include "include/main.h"
 #include "include/debug.h"
 #include "include/dataflash.h"
+#include "include/flash.h"
 #include "include/nandflash.h"
 
 /*------------------------------------------------------------------------------*/
@@ -60,6 +61,10 @@
 	load_df(AT91C_SPI_PCS_DATAFLASH, IMG_ADDRESS, IMG_SIZE, JUMP_ADDR);
 #endif
 
+#ifdef CFG_FLASH
+	load_flash(IMG_ADDRESS, IMG_SIZE, JUMP_ADDR);
+#endif
+
 	/* Load from Nandflash in RAM */
 #ifdef CFG_NANDFLASH
 	load_nandflash(IMG_ADDRESS, IMG_SIZE, JUMP_ADDR);
diff -urN at91bootstrap-2.3/MAKEALL at91bootstrap-2.3.2/MAKEALL
--- at91bootstrap-2.3/MAKEALL	2007-04-09 19:47:20.000000000 +0200
+++ at91bootstrap-2.3.2/MAKEALL	2007-08-14 22:43:19.000000000 +0200
@@ -1,7 +1,7 @@
 #!/bin/bash
 
-make	toolchain
-source	gcc-3.4.6-uclibc.sh
+#make	toolchain
+source	gcc-4.1.2-uclibc-external.sh
 make	distrib
 make	MEMORY=dataflashcard	at91sam9260dfc_defconfig
 make
@@ -9,6 +9,8 @@
 make
 make	MEMORY=nandflash	at91sam9260ek_defconfig
 make
+make	MEMORY=flash		at91sam9260pf_defconfig
+make
 make	MEMORY=dataflash	at91sam9261ek_defconfig
 make
 make	MEMORY=nandflash	at91sam9261ek_defconfig
diff -urN at91bootstrap-2.3/Makefile at91bootstrap-2.3.2/Makefile
--- at91bootstrap-2.3/Makefile	2007-08-14 23:53:42.000000000 +0200
+++ at91bootstrap-2.3.2/Makefile	2007-08-14 22:36:24.000000000 +0200
@@ -8,7 +8,7 @@
 
 TOPDIR	:=	$(CURDIR)
 
-VERSION:=2.3.1
+VERSION:=2.3.2
 
 include	.config
 
@@ -114,6 +114,15 @@
 	echo	SPI_BOOT=SPI_BOOT_CS1		>>	.config
 	echo	SPI_CLK=$(CONFIG_SPI_CLK)	>>	.config
 
+at91sam9260pf_defconfig:	clean
+	echo	BOARDNAME=at91sam9260pf		>	.config
+	echo	BOARD=at91sam9260ek		>>	.config
+	echo	PROJECT=$(MEMORY)		>>	.config
+	echo	CONFIG_$(CFG_MEMORY)=y		>>	.config
+	echo	SPI_MODE=$(CONFIG_SPI_MODE)	>>	.config
+	echo	SPI_BOOT=SPI_BOOT_CS0		>>	.config
+	echo	SPI_CLK=$(CONFIG_SPI_CLK)	>>	.config
+
 at91sam9261ek_defconfig:	clean
 	echo	BOARDNAME=at91sam9261ek		>	.config
 	echo	BOARD=at91sam9261ek		>>	.config