path: root/target/device/Atmel/u-boot/u-boot-1.3.0-100-atmel.2.patch.bad

 MAINTAINERS                                       |    6 +-
 MAKEALL                                           |    3 +
 Makefile                                          |   13 +-
 README                                            |    4 +-
 board/atmel/atngw100/Makefile                     |   40 ++++
 board/atmel/atngw100/atngw100.c                   |   73 +++++++
 board/atmel/atngw100/config.mk                    |    3 +
 board/atmel/atngw100/eth.c                        |   36 ++++
 board/atmel/atngw100/flash.c                      |  232 +++++++++++++++++++++
 board/atmel/atngw100/u-boot.lds                   |   80 +++++++
 cpu/at32ap/at32ap7000/Makefile                    |   43 ----
 cpu/at32ap/at32ap7000/gpio.c                      |  137 ------------
 cpu/at32ap/at32ap700x/Makefile                    |   43 ++++
 cpu/at32ap/at32ap700x/gpio.c                      |  144 +++++++++++++
 cpu/at32ap/atmel_mci.c                            |   13 +-
 include/asm-avr32/arch-at32ap7000/clk.h           |   70 ------
 include/asm-avr32/arch-at32ap7000/gpio.h          |  212 -------------------
 include/asm-avr32/arch-at32ap7000/hmatrix2.h      |  232 ---------------------
 include/asm-avr32/arch-at32ap7000/memory-map.h    |   66 ------
 include/asm-avr32/arch-at32ap7000/mmc.h           |   96 ---------
 include/asm-avr32/arch-at32ap700x/chip-features.h |   34 +++
 include/asm-avr32/arch-at32ap700x/clk.h           |   78 +++++++
 include/asm-avr32/arch-at32ap700x/gpio.h          |  220 +++++++++++++++++++
 include/asm-avr32/arch-at32ap700x/hmatrix2.h      |  232 +++++++++++++++++++++
 include/asm-avr32/arch-at32ap700x/memory-map.h    |   66 ++++++
 include/asm-avr32/arch-at32ap700x/mmc.h           |   96 +++++++++
 include/configs/atngw100.h                        |  177 ++++++++++++++++
 include/configs/atstk1002.h                       |    4 +-
 include/configs/atstk1003.h                       |  184 ++++++++++++++++
 include/configs/atstk1004.h                       |  185 ++++++++++++++++
 lib_avr32/board.c                                 |   10 +
 net/eth.c                                         |    4 +
 32 files changed, 1966 insertions(+), 870 deletions(-)
 create mode 100644 board/atmel/atngw100/Makefile
 create mode 100644 board/atmel/atngw100/atngw100.c
 create mode 100644 board/atmel/atngw100/config.mk
 create mode 100644 board/atmel/atngw100/eth.c
 create mode 100644 board/atmel/atngw100/flash.c
 create mode 100644 board/atmel/atngw100/u-boot.lds
 delete mode 100644 cpu/at32ap/at32ap7000/Makefile
 delete mode 100644 cpu/at32ap/at32ap7000/gpio.c
 create mode 100644 cpu/at32ap/at32ap700x/Makefile
 create mode 100644 cpu/at32ap/at32ap700x/gpio.c
 delete mode 100644 include/asm-avr32/arch-at32ap7000/clk.h
 delete mode 100644 include/asm-avr32/arch-at32ap7000/gpio.h
 delete mode 100644 include/asm-avr32/arch-at32ap7000/hmatrix2.h
 delete mode 100644 include/asm-avr32/arch-at32ap7000/memory-map.h
 delete mode 100644 include/asm-avr32/arch-at32ap7000/mmc.h
 create mode 100644 include/asm-avr32/arch-at32ap700x/chip-features.h
 create mode 100644 include/asm-avr32/arch-at32ap700x/clk.h
 create mode 100644 include/asm-avr32/arch-at32ap700x/gpio.h
 create mode 100644 include/asm-avr32/arch-at32ap700x/hmatrix2.h
 create mode 100644 include/asm-avr32/arch-at32ap700x/memory-map.h
 create mode 100644 include/asm-avr32/arch-at32ap700x/mmc.h
 create mode 100644 include/configs/atngw100.h
 create mode 100644 include/configs/atstk1003.h
 create mode 100644 include/configs/atstk1004.h

diff --git a/MAINTAINERS b/MAINTAINERS
index b8c1fdc..457dce3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -630,7 +630,11 @@ Hayden Fraser <Hayden.Fraser@freescale.com>
 
 Haavard Skinnemoen <hskinnemoen@atmel.com>
 
-	ATSTK1000		AT32AP7000
+	ATSTK1000		AT32AP7xxx
+	ATSTK1002		AT32AP7000
+	ATSTK1003		AT32AP7001
+	ATSTK1004		AT32AP7002
+	ATNGW100		AT32AP7000
 
 #########################################################################
 # End of MAINTAINERS list						#
diff --git a/MAKEALL b/MAKEALL
index 20ef4e1..1538478 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -641,6 +641,9 @@ LIST_coldfire="			\
 
 LIST_avr32="		\
 	atstk1002	\
+	atstk1003	\
+	atstk1004	\
+	atngw100	\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index ac4b430..2db97fd 100644
--- a/Makefile
+++ b/Makefile
@@ -24,7 +24,7 @@
 VERSION = 1
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION =
+EXTRAVERSION = .atmel.2
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 VERSION_FILE = $(obj)include/version_autogenerated.h
 
@@ -2607,7 +2607,16 @@ bf561-ezkit_config:	unconfig
 #########################################################################
 
 atstk1002_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
+	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
+atstk1003_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
+atstk1004_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
+atngw100_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
 
 #########################################################################
 #########################################################################
diff --git a/README b/README
index 3dad5fc..26f93c2 100644
--- a/README
+++ b/README
@@ -235,9 +235,7 @@ The following options need to be configured:
 - Board Type:	Define exactly one, e.g. CONFIG_MPC8540ADS.
 
 - CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined)
-		Define exactly one of
-		CONFIG_ATSTK1002
-
+		Define exactly one, e.g. CONFIG_ATSTK1002
 
 - CPU Module Type: (if CONFIG_COGENT is defined)
 		Define exactly one of
diff --git a/board/atmel/atngw100/Makefile b/board/atmel/atngw100/Makefile
new file mode 100644
index 0000000..f1ea6e6
--- /dev/null
+++ b/board/atmel/atngw100/Makefile
@@ -0,0 +1,40 @@
+#
+# Copyright (C) 2005-2006 Atmel Corporation
+#
+# See file CREDITS for list of people who contributed to this project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o flash.o eth.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
new file mode 100644
index 0000000..bd4b6b4
--- /dev/null
+++ b/board/atmel/atngw100/atngw100.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/sdram.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/hmatrix2.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct sdram_info sdram = {
+	.phys_addr	= CFG_SDRAM_BASE,
+	.row_bits	= 13,
+	.col_bits	= 9,
+	.bank_bits	= 2,
+	.cas		= 3,
+	.twr		= 2,
+	.trc		= 7,
+	.trp		= 2,
+	.trcd		= 2,
+	.tras		= 5,
+	.txsr		= 5,
+};
+
+int board_early_init_f(void)
+{
+	/* Set the SDRAM_ENABLE bit in the HEBI SFR */
+	hmatrix2_writel(SFR4, 1 << 1);
+
+	gpio_enable_ebi();
+	gpio_enable_usart1();
+
+#if defined(CONFIG_MACB)
+	gpio_enable_macb0();
+	gpio_enable_macb1();
+#endif
+#if defined(CONFIG_MMC)
+	gpio_enable_mmci();
+#endif
+
+	return 0;
+}
+
+long int initdram(int board_type)
+{
+	return sdram_init(&sdram);
+}
+
+void board_init_info(void)
+{
+	gd->bd->bi_phy_id[0] = 0x01;
+	gd->bd->bi_phy_id[1] = 0x03;
+}
diff --git a/board/atmel/atngw100/config.mk b/board/atmel/atngw100/config.mk
new file mode 100644
index 0000000..9a794e5
--- /dev/null
+++ b/board/atmel/atngw100/config.mk
@@ -0,0 +1,3 @@
+TEXT_BASE		= 0x00000000
+PLATFORM_RELFLAGS	+= -ffunction-sections -fdata-sections
+PLATFORM_LDFLAGS	+= --gc-sections
diff --git a/board/atmel/atngw100/eth.c b/board/atmel/atngw100/eth.c
new file mode 100644
index 0000000..d1d57bb
--- /dev/null
+++ b/board/atmel/atngw100/eth.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * Ethernet initialization for the AVR32 Network Gateway
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/arch/memory-map.h>
+
+extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
+
+#ifdef CONFIG_CMD_NET
+void atngw100_eth_initialize(bd_t *bi)
+{
+	macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);
+	macb_eth_initialize(1, (void *)MACB1_BASE, bi->bi_phy_id[1]);
+}
+#endif
diff --git a/board/atmel/atngw100/flash.c b/board/atmel/atngw100/flash.c
new file mode 100644
index 0000000..2d9423f
--- /dev/null
+++ b/board/atmel/atngw100/flash.c
@@ -0,0 +1,232 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#ifdef CONFIG_ATNGW100_EXT_FLASH
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/sections.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+flash_info_t flash_info[1];
+
+static void __flashprog flash_identify(uint16_t *flash, flash_info_t *info)
+{
+	unsigned long flags;
+
+	flags = disable_interrupts();
+
+	dcache_flush_unlocked();
+
+	writew(0xaa, flash + 0x555);
+	writew(0x55, flash + 0xaaa);
+	writew(0x90, flash + 0x555);
+	info->flash_id = readl(flash);
+	writew(0xff, flash);
+
+	readw(flash);
+
+	if (flags)
+		enable_interrupts();
+}
+
+unsigned long flash_init(void)
+{
+	unsigned long addr;
+	unsigned int i;
+
+	flash_info[0].size = CFG_FLASH_SIZE;
+	flash_info[0].sector_count = 135;
+
+	flash_identify(uncached((void *)CFG_FLASH_BASE), &flash_info[0]);
+
+	for (i = 0, addr = 0; i < 8; i++, addr += 0x2000)
+		flash_info[0].start[i] = addr;
+	for (; i < flash_info[0].sector_count; i++, addr += 0x10000)
+		flash_info[0].start[i] = addr;
+
+	return CFG_FLASH_SIZE;
+}
+
+void flash_print_info(flash_info_t *info)
+{
+	printf("Flash: Vendor ID: 0x%02x, Product ID: 0x%02x\n",
+	       info->flash_id >> 16, info->flash_id & 0xffff);
+	printf("Size: %ld MB in %d sectors\n",
+	       info->size >> 10, info->sector_count);
+}
+
+int __flashprog flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+	unsigned long flags;
+	unsigned long start_time;
+	uint16_t *fb, *sb;
+	unsigned int i;
+	int ret;
+	uint16_t status;
+
+	if ((s_first < 0) || (s_first > s_last)
+	    || (s_last >= info->sector_count)) {
+		puts("Error: first and/or last sector out of range\n");
+		return ERR_INVAL;
+	}
+
+	for (i = s_first; i < s_last; i++)
+		if (info->protect[i]) {
+			printf("Error: sector %d is protected\n", i);
+			return ERR_PROTECTED;
+		}
+
+	fb = (uint16_t *)uncached(info->start[0]);
+
+	dcache_flush_unlocked();
+
+	for (i = s_first; (i <= s_last) && !ctrlc(); i++) {
+		printf("Erasing sector %3d...", i);
+
+		sb = (uint16_t *)uncached(info->start[i]);
+
+		flags = disable_interrupts();
+
+		start_time = get_timer(0);
+
+		/* Unlock sector */
+		writew(0xaa, fb + 0x555);
+		writew(0x70, sb);
+
+		/* Erase sector */
+		writew(0xaa, fb + 0x555);
+		writew(0x55, fb + 0xaaa);
+		writew(0x80, fb + 0x555);
+		writew(0xaa, fb + 0x555);
+		writew(0x55, fb + 0xaaa);
+		writew(0x30, sb);
+
+		/* Wait for completion */
+		ret = ERR_OK;
+		do {
+			/* TODO: Timeout */
+			status = readw(sb);
+		} while ((status != 0xffff) && !(status & 0x28));
+
+		writew(0xf0, fb);
+
+		/*
+		 * Make sure the command actually makes it to the bus
+		 * before we re-enable interrupts.
+		 */
+		readw(fb);
+
+		if (flags)
+			enable_interrupts();
+
+		if (status != 0xffff) {
+			printf("Flash erase error at address 0x%p: 0x%02x\n",
+			       sb, status);
+			ret = ERR_PROG_ERROR;
+			break;
+		}
+	}
+
+	if (ctrlc())
+		printf("User interrupt!\n");
+
+	return ERR_OK;
+}
+
+int __flashprog write_buff(flash_info_t *info, uchar *src,
+			   ulong addr, ulong count)
+{
+	unsigned long flags;
+	uint16_t *base, *p, *s, *end;
+	uint16_t word, status, status1;
+	int ret = ERR_OK;
+
+	if (addr < info->start[0]
+	    || (addr + count) > (info->start[0] + info->size)
+	    || (addr + count) < addr) {
+		puts("Error: invalid address range\n");
+		return ERR_INVAL;
+	}
+
+	if (addr & 1 || count & 1 || (unsigned int)src & 1) {
+		puts("Error: misaligned source, destination or count\n");
+		return ERR_ALIGN;
+	}
+
+	base = (uint16_t *)uncached(info->start[0]);
+	end = (uint16_t *)uncached(addr + count);
+
+	flags = disable_interrupts();
+
+	dcache_flush_unlocked();
+	sync_write_buffer();
+
+	for (p = (uint16_t *)uncached(addr), s = (uint16_t *)src;
+	     p < end && !ctrlc(); p++, s++) {
+		word = *s;
+
+		writew(0xaa, base + 0x555);
+		writew(0x55, base + 0xaaa);
+		writew(0xa0, base + 0x555);
+		writew(word, p);
+
+		sync_write_buffer();
+
+		/* Wait for completion */
+		status1 = readw(p);
+		do {
+			/* TODO: Timeout */
+			status = status1;
+			status1 = readw(p);
+		} while (((status ^ status1) & 0x40)	/* toggled */
+			 && !(status1 & 0x28));		/* error bits */
+
+		/*
+		 * We'll need to check once again for toggle bit
+		 * because the toggle bit may stop toggling as I/O5
+		 * changes to "1" (ref at49bv642.pdf p9)
+		 */
+		status1 = readw(p);
+		status = readw(p);
+		if ((status ^ status1) & 0x40) {
+			printf("Flash write error at address 0x%p: "
+			       "0x%02x != 0x%02x\n",
+			       p, status,word);
+			ret = ERR_PROG_ERROR;
+			writew(0xf0, base);
+			readw(base);
+			break;
+		}
+
+		writew(0xf0, base);
+		readw(base);
+	}
+
+	if (flags)
+		enable_interrupts();
+
+	return ret;
+}
+
+#endif /* CONFIG_ATSTK1000_EXT_FLASH */
diff --git a/board/atmel/atngw100/u-boot.lds b/board/atmel/atngw100/u-boot.lds
new file mode 100644
index 0000000..34e347a
--- /dev/null
+++ b/board/atmel/atngw100/u-boot.lds
@@ -0,0 +1,80 @@
+/* -*- Fundamental -*-
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
+OUTPUT_ARCH(avr32)
+ENTRY(_start)
+
+SECTIONS
+{
+	. = 0;
+	_text = .;
+	.text : {
+		*(.text)
+		*(.text.*)
+	}
+
+	. = ALIGN(32);
+	__flashprog_start = .;
+	.flashprog : {
+		*(.flashprog)
+	}
+	. = ALIGN(32);
+	__flashprog_end = .;
+	_etext = .;
+
+	.rodata : {
+		*(.rodata)
+		*(.rodata.*)
+	}
+
+	. = ALIGN(8);
+	_data = .;
+	.data : {
+		*(.data)
+		*(.data.*)
+	}
+
+	. = ALIGN(4);
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : {
+		KEEP(*(.u_boot_cmd))
+	}
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	_got = .;
+	.got : {
+		*(.got)
+	}
+	_egot = .;
+
+	. = ALIGN(8);
+	_edata = .;
+
+	.bss : {
+		*(.bss)
+		*(.bss.*)
+	}
+	. = ALIGN(8);
+	_end = .;
+}
diff --git a/cpu/at32ap/at32ap7000/Makefile b/cpu/at32ap/at32ap7000/Makefile
deleted file mode 100644
index d276712..0000000
--- a/cpu/at32ap/at32ap7000/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# Copyright (C) 2005-2006 Atmel Corporation
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	:= $(obj)lib$(SOC).a
-
-COBJS	:= gpio.o
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all: $(obj).depend $(LIB)
-
-$(LIB): $(OBJS)
-	$(AR) $(ARFLAGS) $@ $^
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/at32ap/at32ap7000/gpio.c b/cpu/at32ap/at32ap7000/gpio.c
deleted file mode 100644
index 52f5372..0000000
--- a/cpu/at32ap/at32ap7000/gpio.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-
-#include <asm/arch/gpio.h>
-
-/*
- * Lots of small functions here. We depend on --gc-sections getting
- * rid of the ones we don't need.
- */
-void gpio_enable_ebi(void)
-{
-#ifdef CFG_HSDRAMC
-#ifndef CFG_SDRAM_16BIT
-	gpio_select_periph_A(GPIO_PIN_PE0, 0);
-	gpio_select_periph_A(GPIO_PIN_PE1, 0);
-	gpio_select_periph_A(GPIO_PIN_PE2, 0);
-	gpio_select_periph_A(GPIO_PIN_PE3, 0);
-	gpio_select_periph_A(GPIO_PIN_PE4, 0);
-	gpio_select_periph_A(GPIO_PIN_PE5, 0);
-	gpio_select_periph_A(GPIO_PIN_PE6, 0);
-	gpio_select_periph_A(GPIO_PIN_PE7, 0);
-	gpio_select_periph_A(GPIO_PIN_PE8, 0);
-	gpio_select_periph_A(GPIO_PIN_PE9, 0);
-	gpio_select_periph_A(GPIO_PIN_PE10, 0);
-	gpio_select_periph_A(GPIO_PIN_PE11, 0);
-	gpio_select_periph_A(GPIO_PIN_PE12, 0);
-	gpio_select_periph_A(GPIO_PIN_PE13, 0);
-	gpio_select_periph_A(GPIO_PIN_PE14, 0);
-	gpio_select_periph_A(GPIO_PIN_PE15, 0);
-#endif
-	gpio_select_periph_A(GPIO_PIN_PE26, 0);
-#endif
-}
-
-void gpio_enable_usart0(void)
-{
-	gpio_select_periph_B(GPIO_PIN_PA8, 0);
-	gpio_select_periph_B(GPIO_PIN_PA9, 0);
-}
-
-void gpio_enable_usart1(void)
-{
-	gpio_select_periph_A(GPIO_PIN_PA17, 0);
-	gpio_select_periph_A(GPIO_PIN_PA18, 0);
-}
-
-void gpio_enable_usart2(void)
-{
-	gpio_select_periph_B(GPIO_PIN_PB26, 0);
-	gpio_select_periph_B(GPIO_PIN_PB27, 0);
-}
-
-void gpio_enable_usart3(void)
-{
-	gpio_select_periph_B(GPIO_PIN_PB18, 0);
-	gpio_select_periph_B(GPIO_PIN_PB19, 0);
-}
-
-void gpio_enable_macb0(void)
-{
-	gpio_select_periph_A(GPIO_PIN_PC3,  0);	/* TXD0	*/
-	gpio_select_periph_A(GPIO_PIN_PC4,  0);	/* TXD1	*/
-	gpio_select_periph_A(GPIO_PIN_PC7,  0);	/* TXEN	*/
-	gpio_select_periph_A(GPIO_PIN_PC8,  0);	/* TXCK */
-	gpio_select_periph_A(GPIO_PIN_PC9,  0);	/* RXD0	*/
-	gpio_select_periph_A(GPIO_PIN_PC10, 0);	/* RXD1	*/
-	gpio_select_periph_A(GPIO_PIN_PC13, 0);	/* RXER	*/
-	gpio_select_periph_A(GPIO_PIN_PC15, 0);	/* RXDV	*/
-	gpio_select_periph_A(GPIO_PIN_PC16, 0);	/* MDC	*/
-	gpio_select_periph_A(GPIO_PIN_PC17, 0);	/* MDIO	*/
-#if !defined(CONFIG_RMII)
-	gpio_select_periph_A(GPIO_PIN_PC0,  0);	/* COL	*/
-	gpio_select_periph_A(GPIO_PIN_PC1,  0);	/* CRS	*/
-	gpio_select_periph_A(GPIO_PIN_PC2,  0);	/* TXER	*/
-	gpio_select_periph_A(GPIO_PIN_PC5,  0);	/* TXD2	*/
-	gpio_select_periph_A(GPIO_PIN_PC6,  0);	/* TXD3 */
-	gpio_select_periph_A(GPIO_PIN_PC11, 0);	/* RXD2	*/
-	gpio_select_periph_A(GPIO_PIN_PC12, 0);	/* RXD3	*/
-	gpio_select_periph_A(GPIO_PIN_PC14, 0);	/* RXCK	*/
-	gpio_select_periph_A(GPIO_PIN_PC18, 0);	/* SPD	*/
-#endif
-}
-
-void gpio_enable_macb1(void)
-{
-	gpio_select_periph_B(GPIO_PIN_PD13, 0);	/* TXD0	*/
-	gpio_select_periph_B(GPIO_PIN_PD14, 0);	/* TXD1	*/
-	gpio_select_periph_B(GPIO_PIN_PD11, 0);	/* TXEN	*/
-	gpio_select_periph_B(GPIO_PIN_PD12, 0);	/* TXCK */
-	gpio_select_periph_B(GPIO_PIN_PD10, 0);	/* RXD0	*/
-	gpio_select_periph_B(GPIO_PIN_PD6,  0);	/* RXD1	*/
-	gpio_select_periph_B(GPIO_PIN_PD5,  0);	/* RXER	*/
-	gpio_select_periph_B(GPIO_PIN_PD4,  0);	/* RXDV	*/
-	gpio_select_periph_B(GPIO_PIN_PD3,  0);	/* MDC	*/
-	gpio_select_periph_B(GPIO_PIN_PD2,  0);	/* MDIO	*/
-#if !defined(CONFIG_RMII)
-	gpio_select_periph_B(GPIO_PIN_PC19, 0);	/* COL	*/
-	gpio_select_periph_B(GPIO_PIN_PC23, 0);	/* CRS	*/
-	gpio_select_periph_B(GPIO_PIN_PC26, 0);	/* TXER	*/
-	gpio_select_periph_B(GPIO_PIN_PC27, 0);	/* TXD2	*/
-	gpio_select_periph_B(GPIO_PIN_PC28, 0);	/* TXD3 */
-	gpio_select_periph_B(GPIO_PIN_PC29, 0);	/* RXD2	*/
-	gpio_select_periph_B(GPIO_PIN_PC30, 0);	/* RXD3	*/
-	gpio_select_periph_B(GPIO_PIN_PC24, 0);	/* RXCK	*/
-	gpio_select_periph_B(GPIO_PIN_PD15, 0);	/* SPD	*/
-#endif
-}
-
-void gpio_enable_mmci(void)
-{
-	gpio_select_periph_A(GPIO_PIN_PA10, 0);	/* CLK	 */
-	gpio_select_periph_A(GPIO_PIN_PA11, 0);	/* CMD	 */
-	gpio_select_periph_A(GPIO_PIN_PA12, 0);	/* DATA0 */
-	gpio_select_periph_A(GPIO_PIN_PA13, 0);	/* DATA1 */
-	gpio_select_periph_A(GPIO_PIN_PA14, 0);	/* DATA2 */
-	gpio_select_periph_A(GPIO_PIN_PA15, 0);	/* DATA3 */
-}
diff --git a/cpu/at32ap/at32ap700x/Makefile b/cpu/at32ap/at32ap700x/Makefile
new file mode 100644
index 0000000..d276712
--- /dev/null
+++ b/cpu/at32ap/at32ap700x/Makefile
@@ -0,0 +1,43 @@
+#
+# Copyright (C) 2005-2006 Atmel Corporation
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)lib$(SOC).a
+
+COBJS	:= gpio.o
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+	$(AR) $(ARFLAGS) $@ $^
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/at32ap/at32ap700x/gpio.c b/cpu/at32ap/at32ap700x/gpio.c
new file mode 100644
index 0000000..859124a
--- /dev/null
+++ b/cpu/at32ap/at32ap700x/gpio.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/arch/chip-features.h>
+#include <asm/arch/gpio.h>
+
+/*
+ * Lots of small functions here. We depend on --gc-sections getting
+ * rid of the ones we don't need.
+ */
+void gpio_enable_ebi(void)
+{
+#ifdef CFG_HSDRAMC
+#ifndef CFG_SDRAM_16BIT
+	gpio_select_periph_A(GPIO_PIN_PE0, 0);
+	gpio_select_periph_A(GPIO_PIN_PE1, 0);
+	gpio_select_periph_A(GPIO_PIN_PE2, 0);
+	gpio_select_periph_A(GPIO_PIN_PE3, 0);
+	gpio_select_periph_A(GPIO_PIN_PE4, 0);
+	gpio_select_periph_A(GPIO_PIN_PE5, 0);
+	gpio_select_periph_A(GPIO_PIN_PE6, 0);
+	gpio_select_periph_A(GPIO_PIN_PE7, 0);
+	gpio_select_periph_A(GPIO_PIN_PE8, 0);
+	gpio_select_periph_A(GPIO_PIN_PE9, 0);
+	gpio_select_periph_A(GPIO_PIN_PE10, 0);
+	gpio_select_periph_A(GPIO_PIN_PE11, 0);
+	gpio_select_periph_A(GPIO_PIN_PE12, 0);
+	gpio_select_periph_A(GPIO_PIN_PE13, 0);
+	gpio_select_periph_A(GPIO_PIN_PE14, 0);
+	gpio_select_periph_A(GPIO_PIN_PE15, 0);
+#endif
+	gpio_select_periph_A(GPIO_PIN_PE26, 0);
+#endif
+}
+
+#ifdef AT32AP700x_CHIP_HAS_USART
+void gpio_enable_usart0(void)
+{
+	gpio_select_periph_B(GPIO_PIN_PA8, 0);
+	gpio_select_periph_B(GPIO_PIN_PA9, 0);
+}
+
+void gpio_enable_usart1(void)
+{
+	gpio_select_periph_A(GPIO_PIN_PA17, 0);
+	gpio_select_periph_A(GPIO_PIN_PA18, 0);
+}
+
+void gpio_enable_usart2(void)
+{
+	gpio_select_periph_B(GPIO_PIN_PB26, 0);
+	gpio_select_periph_B(GPIO_PIN_PB27, 0);
+}
+
+void gpio_enable_usart3(void)
+{
+	gpio_select_periph_B(GPIO_PIN_PB17, 0);
+	gpio_select_periph_B(GPIO_PIN_PB18, 0);
+}
+#endif
+
+#ifdef AT32AP700x_CHIP_HAS_MACB
+void gpio_enable_macb0(void)
+{
+	gpio_select_periph_A(GPIO_PIN_PC3,  0);	/* TXD0	*/
+	gpio_select_periph_A(GPIO_PIN_PC4,  0);	/* TXD1	*/
+	gpio_select_periph_A(GPIO_PIN_PC7,  0);	/* TXEN	*/
+	gpio_select_periph_A(GPIO_PIN_PC8,  0);	/* TXCK */
+	gpio_select_periph_A(GPIO_PIN_PC9,  0);	/* RXD0	*/
+	gpio_select_periph_A(GPIO_PIN_PC10, 0);	/* RXD1	*/
+	gpio_select_periph_A(GPIO_PIN_PC13, 0);	/* RXER	*/
+	gpio_select_periph_A(GPIO_PIN_PC15, 0);	/* RXDV	*/
+	gpio_select_periph_A(GPIO_PIN_PC16, 0);	/* MDC	*/
+	gpio_select_periph_A(GPIO_PIN_PC17, 0);	/* MDIO	*/
+#if !defined(CONFIG_RMII)
+	gpio_select_periph_A(GPIO_PIN_PC0,  0);	/* COL	*/
+	gpio_select_periph_A(GPIO_PIN_PC1,  0);	/* CRS	*/
+	gpio_select_periph_A(GPIO_PIN_PC2,  0);	/* TXER	*/
+	gpio_select_periph_A(GPIO_PIN_PC5,  0);	/* TXD2	*/
+	gpio_select_periph_A(GPIO_PIN_PC6,  0);	/* TXD3 */
+	gpio_select_periph_A(GPIO_PIN_PC11, 0);	/* RXD2	*/
+	gpio_select_periph_A(GPIO_PIN_PC12, 0);	/* RXD3	*/
+	gpio_select_periph_A(GPIO_PIN_PC14, 0);	/* RXCK	*/
+	gpio_select_periph_A(GPIO_PIN_PC18, 0);	/* SPD	*/
+#endif
+}
+
+void gpio_enable_macb1(void)
+{
+	gpio_select_periph_B(GPIO_PIN_PD13, 0);	/* TXD0	*/
+	gpio_select_periph_B(GPIO_PIN_PD14, 0);	/* TXD1	*/
+	gpio_select_periph_B(GPIO_PIN_PD11, 0);	/* TXEN	*/
+	gpio_select_periph_B(GPIO_PIN_PD12, 0);	/* TXCK */
+	gpio_select_periph_B(GPIO_PIN_PD10, 0);	/* RXD0	*/
+	gpio_select_periph_B(GPIO_PIN_PD6,  0);	/* RXD1	*/
+	gpio_select_periph_B(GPIO_PIN_PD5,  0);	/* RXER	*/
+	gpio_select_periph_B(GPIO_PIN_PD4,  0);	/* RXDV	*/
+	gpio_select_periph_B(GPIO_PIN_PD3,  0);	/* MDC	*/
+	gpio_select_periph_B(GPIO_PIN_PD2,  0);	/* MDIO	*/
+#if !defined(CONFIG_RMII)
+	gpio_select_periph_B(GPIO_PIN_PC19, 0);	/* COL	*/
+	gpio_select_periph_B(GPIO_PIN_PC23, 0);	/* CRS	*/
+	gpio_select_periph_B(GPIO_PIN_PC26, 0);	/* TXER	*/
+	gpio_select_periph_B(GPIO_PIN_PC27, 0);	/* TXD2	*/
+	gpio_select_periph_B(GPIO_PIN_PC28, 0);	/* TXD3 */
+	gpio_select_periph_B(GPIO_PIN_PC29, 0);	/* RXD2	*/
+	gpio_select_periph_B(GPIO_PIN_PC30, 0);	/* RXD3	*/
+	gpio_select_periph_B(GPIO_PIN_PC24, 0);	/* RXCK	*/
+	gpio_select_periph_B(GPIO_PIN_PD15, 0);	/* SPD	*/
+#endif
+}
+#endif
+
+#ifdef AT32AP700x_CHIP_HAS_MMCI
+void gpio_enable_mmci(void)
+{
+	gpio_select_periph_A(GPIO_PIN_PA10, 0);	/* CLK	 */
+	gpio_select_periph_A(GPIO_PIN_PA11, 0);	/* CMD	 */
+	gpio_select_periph_A(GPIO_PIN_PA12, 0);	/* DATA0 */
+	gpio_select_periph_A(GPIO_PIN_PA13, 0);	/* DATA1 */
+	gpio_select_periph_A(GPIO_PIN_PA14, 0);	/* DATA2 */
+	gpio_select_periph_A(GPIO_PIN_PA15, 0);	/* DATA3 */
+}
+#endif
diff --git a/cpu/at32ap/atmel_mci.c b/cpu/at32ap/atmel_mci.c
index cf48be1..f59dfb5 100644
--- a/cpu/at32ap/atmel_mci.c
+++ b/cpu/at32ap/atmel_mci.c
@@ -198,11 +198,11 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
 
 	/* Put the device into Transfer state */
 	ret = mmc_cmd(MMC_CMD_SELECT_CARD, mmc_rca << 16, resp, R1 | NCR);
-	if (ret) goto fail;
+	if (ret) goto out;
 
 	/* Set block length */
 	ret = mmc_cmd(MMC_CMD_SET_BLOCKLEN, mmc_blkdev.blksz, resp, R1 | NCR);
-	if (ret) goto fail;
+	if (ret) goto out;
 
 	pr_debug("MCI_DTOR = %08lx\n", mmci_readl(DTOR));
 
@@ -211,7 +211,7 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
 			      start * mmc_blkdev.blksz, resp,
 			      (R1 | NCR | TRCMD_START | TRDIR_READ
 			       | TRTYP_BLOCK));
-		if (ret) goto fail;
+		if (ret) goto out;
 
 		ret = -EIO;
 		wordcount = 0;
@@ -219,7 +219,7 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
 			do {
 				status = mmci_readl(SR);
 				if (status & (ERROR_FLAGS | MMCI_BIT(OVRE)))
-					goto fail;
+					goto read_error;
 			} while (!(status & MMCI_BIT(RXRDY)));
 
 			if (status & MMCI_BIT(RXRDY)) {
@@ -244,9 +244,10 @@ out:
 	mmc_cmd(MMC_CMD_SELECT_CARD, 0, resp, NCR);
 	return i;
 
-fail:
+read_error:
 	mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, R1 | NCR);
-	printf("mmc: bread failed, card status = %08x\n", card_status);
+	printf("mmc: bread failed, status = %08x, card status = %08x\n",
+	       status, card_status);
 	goto out;
 }
 
diff --git a/include/asm-avr32/arch-at32ap7000/clk.h b/include/asm-avr32/arch-at32ap7000/clk.h
deleted file mode 100644
index 7e20d97..0000000
--- a/include/asm-avr32/arch-at32ap7000/clk.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __ASM_AVR32_ARCH_CLK_H__
-#define __ASM_AVR32_ARCH_CLK_H__
-
-#ifdef CONFIG_PLL
-#define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL)
-#else
-#define MAIN_CLK_RATE (CFG_OSC0_HZ)
-#endif
-
-static inline unsigned long get_cpu_clk_rate(void)
-{
-	return MAIN_CLK_RATE >> CFG_CLKDIV_CPU;
-}
-static inline unsigned long get_hsb_clk_rate(void)
-{
-	return MAIN_CLK_RATE >> CFG_CLKDIV_HSB;
-}
-static inline unsigned long get_pba_clk_rate(void)
-{
-	return MAIN_CLK_RATE >> CFG_CLKDIV_PBA;
-}
-static inline unsigned long get_pbb_clk_rate(void)
-{
-	return MAIN_CLK_RATE >> CFG_CLKDIV_PBB;
-}
-
-/* Accessors for specific devices. More will be added as needed. */
-static inline unsigned long get_sdram_clk_rate(void)
-{
-	return get_hsb_clk_rate();
-}
-static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
-{
-	return get_pba_clk_rate();
-}
-static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
-{
-	return get_pbb_clk_rate();
-}
-static inline unsigned long get_macb_hclk_rate(unsigned int dev_id)
-{
-	return get_hsb_clk_rate();
-}
-static inline unsigned long get_mci_clk_rate(void)
-{
-	return get_pbb_clk_rate();
-}
-
-#endif /* __ASM_AVR32_ARCH_CLK_H__ */
diff --git a/include/asm-avr32/arch-at32ap7000/gpio.h b/include/asm-avr32/arch-at32ap7000/gpio.h
deleted file mode 100644
index e4812d4..0000000
--- a/include/asm-avr32/arch-at32ap7000/gpio.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __ASM_AVR32_ARCH_GPIO_H__
-#define __ASM_AVR32_ARCH_GPIO_H__
-
-#include <asm/arch/memory-map.h>
-
-#define NR_GPIO_CONTROLLERS	5
-
-/*
- * Pin numbers identifying specific GPIO pins on the chip.
- */
-#define GPIO_PIOA_BASE	(0)
-#define GPIO_PIN_PA0	(GPIO_PIOA_BASE +  0)
-#define GPIO_PIN_PA1	(GPIO_PIOA_BASE +  1)
-#define GPIO_PIN_PA2	(GPIO_PIOA_BASE +  2)
-#define GPIO_PIN_PA3	(GPIO_PIOA_BASE +  3)
-#define GPIO_PIN_PA4	(GPIO_PIOA_BASE +  4)
-#define GPIO_PIN_PA5	(GPIO_PIOA_BASE +  5)
-#define GPIO_PIN_PA6	(GPIO_PIOA_BASE +  6)
-#define GPIO_PIN_PA7	(GPIO_PIOA_BASE +  7)
-#define GPIO_PIN_PA8	(GPIO_PIOA_BASE +  8)
-#define GPIO_PIN_PA9	(GPIO_PIOA_BASE +  9)
-#define GPIO_PIN_PA10	(GPIO_PIOA_BASE + 10)
-#define GPIO_PIN_PA11	(GPIO_PIOA_BASE + 11)
-#define GPIO_PIN_PA12	(GPIO_PIOA_BASE + 12)
-#define GPIO_PIN_PA13	(GPIO_PIOA_BASE + 13)
-#define GPIO_PIN_PA14	(GPIO_PIOA_BASE + 14)
-#define GPIO_PIN_PA15	(GPIO_PIOA_BASE + 15)
-#define GPIO_PIN_PA16	(GPIO_PIOA_BASE + 16)
-#define GPIO_PIN_PA17	(GPIO_PIOA_BASE + 17)
-#define GPIO_PIN_PA18	(GPIO_PIOA_BASE + 18)
-#define GPIO_PIN_PA19	(GPIO_PIOA_BASE + 19)
-#define GPIO_PIN_PA20	(GPIO_PIOA_BASE + 20)
-#define GPIO_PIN_PA21	(GPIO_PIOA_BASE + 21)
-#define GPIO_PIN_PA22	(GPIO_PIOA_BASE + 22)
-#define GPIO_PIN_PA23	(GPIO_PIOA_BASE + 23)
-#define GPIO_PIN_PA24	(GPIO_PIOA_BASE + 24)
-#define GPIO_PIN_PA25	(GPIO_PIOA_BASE + 25)
-#define GPIO_PIN_PA26	(GPIO_PIOA_BASE + 26)
-#define GPIO_PIN_PA27	(GPIO_PIOA_BASE + 27)
-#define GPIO_PIN_PA28	(GPIO_PIOA_BASE + 28)
-#define GPIO_PIN_PA29	(GPIO_PIOA_BASE + 29)
-#define GPIO_PIN_PA30	(GPIO_PIOA_BASE + 30)
-#define GPIO_PIN_PA31	(GPIO_PIOA_BASE + 31)
-
-#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
-#define GPIO_PIN_PB0	(GPIO_PIOB_BASE +  0)
-#define GPIO_PIN_PB1	(GPIO_PIOB_BASE +  1)
-#define GPIO_PIN_PB2	(GPIO_PIOB_BASE +  2)
-#define GPIO_PIN_PB3	(GPIO_PIOB_BASE +  3)
-#define GPIO_PIN_PB4	(GPIO_PIOB_BASE +  4)
-#define GPIO_PIN_PB5	(GPIO_PIOB_BASE +  5)
-#define GPIO_PIN_PB6	(GPIO_PIOB_BASE +  6)
-#define GPIO_PIN_PB7	(GPIO_PIOB_BASE +  7)
-#define GPIO_PIN_PB8	(GPIO_PIOB_BASE +  8)
-#define GPIO_PIN_PB9	(GPIO_PIOB_BASE +  9)
-#define GPIO_PIN_PB10	(GPIO_PIOB_BASE + 10)
-#define GPIO_PIN_PB11	(GPIO_PIOB_BASE + 11)
-#define GPIO_PIN_PB12	(GPIO_PIOB_BASE + 12)
-#define GPIO_PIN_PB13	(GPIO_PIOB_BASE + 13)
-#define GPIO_PIN_PB14	(GPIO_PIOB_BASE + 14)
-#define GPIO_PIN_PB15	(GPIO_PIOB_BASE + 15)
-#define GPIO_PIN_PB16	(GPIO_PIOB_BASE + 16)
-#define GPIO_PIN_PB17	(GPIO_PIOB_BASE + 17)
-#define GPIO_PIN_PB18	(GPIO_PIOB_BASE + 18)
-#define GPIO_PIN_PB19	(GPIO_PIOB_BASE + 19)
-#define GPIO_PIN_PB20	(GPIO_PIOB_BASE + 20)
-#define GPIO_PIN_PB21	(GPIO_PIOB_BASE + 21)
-#define GPIO_PIN_PB22	(GPIO_PIOB_BASE + 22)
-#define GPIO_PIN_PB23	(GPIO_PIOB_BASE + 23)
-#define GPIO_PIN_PB24	(GPIO_PIOB_BASE + 24)
-#define GPIO_PIN_PB25	(GPIO_PIOB_BASE + 25)
-#define GPIO_PIN_PB26	(GPIO_PIOB_BASE + 26)
-#define GPIO_PIN_PB27	(GPIO_PIOB_BASE + 27)
-#define GPIO_PIN_PB28	(GPIO_PIOB_BASE + 28)
-#define GPIO_PIN_PB29	(GPIO_PIOB_BASE + 29)
-#define GPIO_PIN_PB30	(GPIO_PIOB_BASE + 30)
-
-#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
-#define GPIO_PIN_PC0	(GPIO_PIOC_BASE +  0)
-#define GPIO_PIN_PC1	(GPIO_PIOC_BASE +  1)
-#define GPIO_PIN_PC2	(GPIO_PIOC_BASE +  2)
-#define GPIO_PIN_PC3	(GPIO_PIOC_BASE +  3)
-#define GPIO_PIN_PC4	(GPIO_PIOC_BASE +  4)
-#define GPIO_PIN_PC5	(GPIO_PIOC_BASE +  5)
-#define GPIO_PIN_PC6	(GPIO_PIOC_BASE +  6)
-#define GPIO_PIN_PC7	(GPIO_PIOC_BASE +  7)
-#define GPIO_PIN_PC8	(GPIO_PIOC_BASE +  8)
-#define GPIO_PIN_PC9	(GPIO_PIOC_BASE +  9)
-#define GPIO_PIN_PC10	(GPIO_PIOC_BASE + 10)
-#define GPIO_PIN_PC11	(GPIO_PIOC_BASE + 11)
-#define GPIO_PIN_PC12	(GPIO_PIOC_BASE + 12)
-#define GPIO_PIN_PC13	(GPIO_PIOC_BASE + 13)
-#define GPIO_PIN_PC14	(GPIO_PIOC_BASE + 14)
-#define GPIO_PIN_PC15	(GPIO_PIOC_BASE + 15)
-#define GPIO_PIN_PC16	(GPIO_PIOC_BASE + 16)
-#define GPIO_PIN_PC17	(GPIO_PIOC_BASE + 17)
-#define GPIO_PIN_PC18	(GPIO_PIOC_BASE + 18)
-#define GPIO_PIN_PC19	(GPIO_PIOC_BASE + 19)
-#define GPIO_PIN_PC20	(GPIO_PIOC_BASE + 20)
-#define GPIO_PIN_PC21	(GPIO_PIOC_BASE + 21)
-#define GPIO_PIN_PC22	(GPIO_PIOC_BASE + 22)
-#define GPIO_PIN_PC23	(GPIO_PIOC_BASE + 23)
-#define GPIO_PIN_PC24	(GPIO_PIOC_BASE + 24)
-#define GPIO_PIN_PC25	(GPIO_PIOC_BASE + 25)
-#define GPIO_PIN_PC26	(GPIO_PIOC_BASE + 26)
-#define GPIO_PIN_PC27	(GPIO_PIOC_BASE + 27)
-#define GPIO_PIN_PC28	(GPIO_PIOC_BASE + 28)
-#define GPIO_PIN_PC29	(GPIO_PIOC_BASE + 29)
-#define GPIO_PIN_PC30	(GPIO_PIOC_BASE + 30)
-#define GPIO_PIN_PC31	(GPIO_PIOC_BASE + 31)
-
-#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
-#define GPIO_PIN_PD0	(GPIO_PIOD_BASE +  0)
-#define GPIO_PIN_PD1	(GPIO_PIOD_BASE +  1)
-#define GPIO_PIN_PD2	(GPIO_PIOD_BASE +  2)
-#define GPIO_PIN_PD3	(GPIO_PIOD_BASE +  3)
-#define GPIO_PIN_PD4	(GPIO_PIOD_BASE +  4)
-#define GPIO_PIN_PD5	(GPIO_PIOD_BASE +  5)
-#define GPIO_PIN_PD6	(GPIO_PIOD_BASE +  6)
-#define GPIO_PIN_PD7	(GPIO_PIOD_BASE +  7)
-#define GPIO_PIN_PD8	(GPIO_PIOD_BASE +  8)
-#define GPIO_PIN_PD9	(GPIO_PIOD_BASE +  9)
-#define GPIO_PIN_PD10	(GPIO_PIOD_BASE + 10)
-#define GPIO_PIN_PD11	(GPIO_PIOD_BASE + 11)
-#define GPIO_PIN_PD12	(GPIO_PIOD_BASE + 12)
-#define GPIO_PIN_PD13	(GPIO_PIOD_BASE + 13)
-#define GPIO_PIN_PD14	(GPIO_PIOD_BASE + 14)
-#define GPIO_PIN_PD15	(GPIO_PIOD_BASE + 15)
-#define GPIO_PIN_PD16	(GPIO_PIOD_BASE + 16)
-#define GPIO_PIN_PD17	(GPIO_PIOD_BASE + 17)
-
-#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
-#define GPIO_PIN_PE0	(GPIO_PIOE_BASE +  0)
-#define GPIO_PIN_PE1	(GPIO_PIOE_BASE +  1)
-#define GPIO_PIN_PE2	(GPIO_PIOE_BASE +  2)
-#define GPIO_PIN_PE3	(GPIO_PIOE_BASE +  3)
-#define GPIO_PIN_PE4	(GPIO_PIOE_BASE +  4)
-#define GPIO_PIN_PE5	(GPIO_PIOE_BASE +  5)
-#define GPIO_PIN_PE6	(GPIO_PIOE_BASE +  6)
-#define GPIO_PIN_PE7	(GPIO_PIOE_BASE +  7)
-#define GPIO_PIN_PE8	(GPIO_PIOE_BASE +  8)
-#define GPIO_PIN_PE9	(GPIO_PIOE_BASE +  9)
-#define GPIO_PIN_PE10	(GPIO_PIOE_BASE + 10)
-#define GPIO_PIN_PE11	(GPIO_PIOE_BASE + 11)
-#define GPIO_PIN_PE12	(GPIO_PIOE_BASE + 12)
-#define GPIO_PIN_PE13	(GPIO_PIOE_BASE + 13)
-#define GPIO_PIN_PE14	(GPIO_PIOE_BASE + 14)
-#define GPIO_PIN_PE15	(GPIO_PIOE_BASE + 15)
-#define GPIO_PIN_PE16	(GPIO_PIOE_BASE + 16)
-#define GPIO_PIN_PE17	(GPIO_PIOE_BASE + 17)
-#define GPIO_PIN_PE18	(GPIO_PIOE_BASE + 18)
-#define GPIO_PIN_PE19	(GPIO_PIOE_BASE + 19)
-#define GPIO_PIN_PE20	(GPIO_PIOE_BASE + 20)
-#define GPIO_PIN_PE21	(GPIO_PIOE_BASE + 21)
-#define GPIO_PIN_PE22	(GPIO_PIOE_BASE + 22)
-#define GPIO_PIN_PE23	(GPIO_PIOE_BASE + 23)
-#define GPIO_PIN_PE24	(GPIO_PIOE_BASE + 24)
-#define GPIO_PIN_PE25	(GPIO_PIOE_BASE + 25)
-#define GPIO_PIN_PE26	(GPIO_PIOE_BASE + 26)
-
-static inline void *gpio_pin_to_addr(unsigned int pin)
-{
-	switch (pin >> 5) {
-	case 0:
-		return (void *)PIOA_BASE;
-	case 1:
-		return (void *)PIOB_BASE;
-	case 2:
-		return (void *)PIOC_BASE;
-	case 3:
-		return (void *)PIOD_BASE;
-	case 4:
-		return (void *)PIOE_BASE;
-	default:
-		return NULL;
-	}
-}
-
-void gpio_select_periph_A(unsigned int pin, int use_pullup);
-void gpio_select_periph_B(unsigned int pin, int use_pullup);
-
-void gpio_enable_ebi(void);
-void gpio_enable_usart0(void);
-void gpio_enable_usart1(void);
-void gpio_enable_usart2(void);
-void gpio_enable_usart3(void);
-void gpio_enable_macb0(void);
-void gpio_enable_macb1(void);
-void gpio_enable_mmci(void);
-
-#endif /* __ASM_AVR32_ARCH_GPIO_H__ */
diff --git a/include/asm-avr32/arch-at32ap7000/hmatrix2.h b/include/asm-avr32/arch-at32ap7000/hmatrix2.h
deleted file mode 100644
index b0e787a..0000000
--- a/include/asm-avr32/arch-at32ap7000/hmatrix2.h
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * Register definition for the High-speed Bus Matrix
- */
-#ifndef __ASM_AVR32_HMATRIX2_H__
-#define __ASM_AVR32_HMATRIX2_H__
-
-/* HMATRIX2 register offsets */
-#define HMATRIX2_MCFG0				0x0000
-#define HMATRIX2_MCFG1				0x0004
-#define HMATRIX2_MCFG2				0x0008
-#define HMATRIX2_MCFG3				0x000c
-#define HMATRIX2_MCFG4				0x0010
-#define HMATRIX2_MCFG5				0x0014
-#define HMATRIX2_MCFG6				0x0018
-#define HMATRIX2_MCFG7				0x001c
-#define HMATRIX2_MCFG8				0x0020
-#define HMATRIX2_MCFG9				0x0024
-#define HMATRIX2_MCFG10				0x0028
-#define HMATRIX2_MCFG11				0x002c
-#define HMATRIX2_MCFG12				0x0030
-#define HMATRIX2_MCFG13				0x0034
-#define HMATRIX2_MCFG14				0x0038
-#define HMATRIX2_MCFG15				0x003c
-#define HMATRIX2_SCFG0				0x0040
-#define HMATRIX2_SCFG1				0x0044
-#define HMATRIX2_SCFG2				0x0048
-#define HMATRIX2_SCFG3				0x004c
-#define HMATRIX2_SCFG4				0x0050
-#define HMATRIX2_SCFG5				0x0054
-#define HMATRIX2_SCFG6				0x0058
-#define HMATRIX2_SCFG7				0x005c
-#define HMATRIX2_SCFG8				0x0060
-#define HMATRIX2_SCFG9				0x0064
-#define HMATRIX2_SCFG10				0x0068
-#define HMATRIX2_SCFG11				0x006c
-#define HMATRIX2_SCFG12				0x0070
-#define HMATRIX2_SCFG13				0x0074
-#define HMATRIX2_SCFG14				0x0078
-#define HMATRIX2_SCFG15				0x007c
-#define HMATRIX2_PRAS0				0x0080
-#define HMATRIX2_PRBS0				0x0084
-#define HMATRIX2_PRAS1				0x0088
-#define HMATRIX2_PRBS1				0x008c
-#define HMATRIX2_PRAS2				0x0090
-#define HMATRIX2_PRBS2				0x0094
-#define HMATRIX2_PRAS3				0x0098
-#define HMATRIX2_PRBS3				0x009c
-#define HMATRIX2_PRAS4				0x00a0
-#define HMATRIX2_PRBS4				0x00a4
-#define HMATRIX2_PRAS5				0x00a8
-#define HMATRIX2_PRBS5				0x00ac
-#define HMATRIX2_PRAS6				0x00b0
-#define HMATRIX2_PRBS6				0x00b4
-#define HMATRIX2_PRAS7				0x00b8
-#define HMATRIX2_PRBS7				0x00bc
-#define HMATRIX2_PRAS8				0x00c0
-#define HMATRIX2_PRBS8				0x00c4
-#define HMATRIX2_PRAS9				0x00c8
-#define HMATRIX2_PRBS9				0x00cc
-#define HMATRIX2_PRAS10				0x00d0
-#define HMATRIX2_PRBS10				0x00d4
-#define HMATRIX2_PRAS11				0x00d8
-#define HMATRIX2_PRBS11				0x00dc
-#define HMATRIX2_PRAS12				0x00e0
-#define HMATRIX2_PRBS12				0x00e4
-#define HMATRIX2_PRAS13				0x00e8
-#define HMATRIX2_PRBS13				0x00ec
-#define HMATRIX2_PRAS14				0x00f0
-#define HMATRIX2_PRBS14				0x00f4
-#define HMATRIX2_PRAS15				0x00f8
-#define HMATRIX2_PRBS15				0x00fc
-#define HMATRIX2_MRCR				0x0100
-#define HMATRIX2_SFR0				0x0110
-#define HMATRIX2_SFR1				0x0114
-#define HMATRIX2_SFR2				0x0118
-#define HMATRIX2_SFR3				0x011c
-#define HMATRIX2_SFR4				0x0120
-#define HMATRIX2_SFR5				0x0124
-#define HMATRIX2_SFR6				0x0128
-#define HMATRIX2_SFR7				0x012c
-#define HMATRIX2_SFR8				0x0130
-#define HMATRIX2_SFR9				0x0134
-#define HMATRIX2_SFR10				0x0138
-#define HMATRIX2_SFR11				0x013c
-#define HMATRIX2_SFR12				0x0140
-#define HMATRIX2_SFR13				0x0144
-#define HMATRIX2_SFR14				0x0148
-#define HMATRIX2_SFR15				0x014c
-#define HMATRIX2_VERSION			0x01fc
-
-/* Bitfields in MCFG0 */
-#define HMATRIX2_ULBT_OFFSET			0
-#define HMATRIX2_ULBT_SIZE			3
-
-/* Bitfields in SCFG0 */
-#define HMATRIX2_SLOT_CYCLE_OFFSET		0
-#define HMATRIX2_SLOT_CYCLE_SIZE		8
-#define HMATRIX2_DEFMSTR_TYPE_OFFSET		16
-#define HMATRIX2_DEFMSTR_TYPE_SIZE		2
-#define HMATRIX2_FIXED_DEFMSTR_OFFSET		18
-#define HMATRIX2_FIXED_DEFMSTR_SIZE		4
-#define HMATRIX2_ARBT_OFFSET			24
-#define HMATRIX2_ARBT_SIZE			2
-
-/* Bitfields in PRAS0 */
-#define HMATRIX2_M0PR_OFFSET			0
-#define HMATRIX2_M0PR_SIZE			4
-#define HMATRIX2_M1PR_OFFSET			4
-#define HMATRIX2_M1PR_SIZE			4
-#define HMATRIX2_M2PR_OFFSET			8
-#define HMATRIX2_M2PR_SIZE			4
-#define HMATRIX2_M3PR_OFFSET			12
-#define HMATRIX2_M3PR_SIZE			4
-#define HMATRIX2_M4PR_OFFSET			16
-#define HMATRIX2_M4PR_SIZE			4
-#define HMATRIX2_M5PR_OFFSET			20
-#define HMATRIX2_M5PR_SIZE			4
-#define HMATRIX2_M6PR_OFFSET			24
-#define HMATRIX2_M6PR_SIZE			4
-#define HMATRIX2_M7PR_OFFSET			28
-#define HMATRIX2_M7PR_SIZE			4
-
-/* Bitfields in PRBS0 */
-#define HMATRIX2_M8PR_OFFSET			0
-#define HMATRIX2_M8PR_SIZE			4
-#define HMATRIX2_M9PR_OFFSET			4
-#define HMATRIX2_M9PR_SIZE			4
-#define HMATRIX2_M10PR_OFFSET			8
-#define HMATRIX2_M10PR_SIZE			4
-#define HMATRIX2_M11PR_OFFSET			12
-#define HMATRIX2_M11PR_SIZE			4
-#define HMATRIX2_M12PR_OFFSET			16
-#define HMATRIX2_M12PR_SIZE			4
-#define HMATRIX2_M13PR_OFFSET			20
-#define HMATRIX2_M13PR_SIZE			4
-#define HMATRIX2_M14PR_OFFSET			24
-#define HMATRIX2_M14PR_SIZE			4
-#define HMATRIX2_M15PR_OFFSET			28
-#define HMATRIX2_M15PR_SIZE			4
-
-/* Bitfields in MRCR */
-#define HMATRIX2_RBC0_OFFSET			0
-#define HMATRIX2_RBC0_SIZE			1
-#define HMATRIX2_RBC1_OFFSET			1
-#define HMATRIX2_RBC1_SIZE			1
-#define HMATRIX2_RBC2_OFFSET			2
-#define HMATRIX2_RBC2_SIZE			1
-#define HMATRIX2_RBC3_OFFSET			3
-#define HMATRIX2_RBC3_SIZE			1
-#define HMATRIX2_RBC4_OFFSET			4
-#define HMATRIX2_RBC4_SIZE			1
-#define HMATRIX2_RBC5_OFFSET			5
-#define HMATRIX2_RBC5_SIZE			1
-#define HMATRIX2_RBC6_OFFSET			6
-#define HMATRIX2_RBC6_SIZE			1
-#define HMATRIX2_RBC7_OFFSET			7
-#define HMATRIX2_RBC7_SIZE			1
-#define HMATRIX2_RBC8_OFFSET			8
-#define HMATRIX2_RBC8_SIZE			1
-#define HMATRIX2_RBC9_OFFSET			9
-#define HMATRIX2_RBC9_SIZE			1
-#define HMATRIX2_RBC10_OFFSET			10
-#define HMATRIX2_RBC10_SIZE			1
-#define HMATRIX2_RBC11_OFFSET			11
-#define HMATRIX2_RBC11_SIZE			1
-#define HMATRIX2_RBC12_OFFSET			12
-#define HMATRIX2_RBC12_SIZE			1
-#define HMATRIX2_RBC13_OFFSET			13
-#define HMATRIX2_RBC13_SIZE			1
-#define HMATRIX2_RBC14_OFFSET			14
-#define HMATRIX2_RBC14_SIZE			1
-#define HMATRIX2_RBC15_OFFSET			15
-#define HMATRIX2_RBC15_SIZE			1
-
-/* Bitfields in SFR0 */
-#define HMATRIX2_SFR_OFFSET			0
-#define HMATRIX2_SFR_SIZE			32
-
-/* Bitfields in SFR4 */
-#define HMATRIX2_CS1A_OFFSET			1
-#define HMATRIX2_CS1A_SIZE			1
-#define HMATRIX2_CS3A_OFFSET			3
-#define HMATRIX2_CS3A_SIZE			1
-#define HMATRIX2_CS4A_OFFSET			4
-#define HMATRIX2_CS4A_SIZE			1
-#define HMATRIX2_CS5A_OFFSET			5
-#define HMATRIX2_CS5A_SIZE			1
-#define HMATRIX2_DBPUC_OFFSET			8
-#define HMATRIX2_DBPUC_SIZE			1
-
-/* Bitfields in VERSION */
-#define HMATRIX2_VERSION_OFFSET			0
-#define HMATRIX2_VERSION_SIZE			12
-#define HMATRIX2_MFN_OFFSET			16
-#define HMATRIX2_MFN_SIZE			3
-
-/* Constants for ULBT */
-#define HMATRIX2_ULBT_INFINITE			0
-#define HMATRIX2_ULBT_SINGLE			1
-#define HMATRIX2_ULBT_FOUR_BEAT			2
-#define HMATRIX2_ULBT_SIXTEEN_BEAT		4
-
-/* Constants for DEFMSTR_TYPE */
-#define HMATRIX2_DEFMSTR_TYPE_NO_DEFAULT	0
-#define HMATRIX2_DEFMSTR_TYPE_LAST_DEFAULT	1
-#define HMATRIX2_DEFMSTR_TYPE_FIXED_DEFAULT	2
-
-/* Constants for ARBT */
-#define HMATRIX2_ARBT_ROUND_ROBIN		0
-#define HMATRIX2_ARBT_FIXED_PRIORITY		1
-
-/* Bit manipulation macros */
-#define HMATRIX2_BIT(name)					\
-	(1 << HMATRIX2_##name##_OFFSET)
-#define HMATRIX2_BF(name,value)					\
-	(((value) & ((1 << HMATRIX2_##name##_SIZE) - 1))	\
-	 << HMATRIX2_##name##_OFFSET)
-#define HMATRIX2_BFEXT(name,value)				\
-	(((value) >> HMATRIX2_##name##_OFFSET)			\
-	 & ((1 << HMATRIX2_##name##_SIZE) - 1))
-#define HMATRIX2_BFINS(name,value,old)				\
-	(((old) & ~(((1 << HMATRIX2_##name##_SIZE) - 1)		\
-		    << HMATRIX2_##name##_OFFSET))		\
-	 | HMATRIX2_BF(name,value))
-
-/* Register access macros */
-#define hmatrix2_readl(reg)					\
-	readl((void *)HMATRIX_BASE + HMATRIX2_##reg)
-#define hmatrix2_writel(reg,value)				\
-	writel((value), (void *)HMATRIX_BASE + HMATRIX2_##reg)
-
-#endif /* __ASM_AVR32_HMATRIX2_H__ */
diff --git a/include/asm-avr32/arch-at32ap7000/memory-map.h b/include/asm-avr32/arch-at32ap7000/memory-map.h
deleted file mode 100644
index 5513e88..0000000
--- a/include/asm-avr32/arch-at32ap7000/memory-map.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __AT32AP7000_MEMORY_MAP_H__
-#define __AT32AP7000_MEMORY_MAP_H__
-
-/* Devices on the High Speed Bus (HSB) */
-#define LCDC_BASE				0xFF000000
-#define DMAC_BASE				0xFF200000
-#define USB_FIFO				0xFF300000
-
-/* Devices on Peripheral Bus A (PBA) */
-#define SPI0_BASE				0xFFE00000
-#define SPI1_BASE				0xFFE00400
-#define TWI_BASE				0xFFE00800
-#define USART0_BASE				0xFFE00C00
-#define USART1_BASE				0xFFE01000
-#define USART2_BASE				0xFFE01400
-#define USART3_BASE				0xFFE01800
-#define SSC0_BASE				0xFFE01C00
-#define SSC1_BASE				0xFFE02000
-#define SSC2_BASE				0xFFE02400
-#define PIOA_BASE				0xFFE02800
-#define PIOB_BASE				0xFFE02C00
-#define PIOC_BASE				0xFFE03000
-#define PIOD_BASE				0xFFE03400
-#define PIOE_BASE				0xFFE03800
-#define PSIF_BASE				0xFFE03C00
-
-/* Devices on Peripheral Bus B (PBB) */
-#define SM_BASE					0xFFF00000
-#define INTC_BASE				0xFFF00400
-#define HMATRIX_BASE				0xFFF00800
-#define TIMER0_BASE				0xFFF00C00
-#define TIMER1_BASE				0xFFF01000
-#define PWM_BASE				0xFFF01400
-#define MACB0_BASE				0xFFF01800
-#define MACB1_BASE				0xFFF01C00
-#define DAC_BASE				0xFFF02000
-#define MMCI_BASE				0xFFF02400
-#define AUDIOC_BASE				0xFFF02800
-#define HISI_BASE				0xFFF02C00
-#define USB_BASE				0xFFF03000
-#define HSMC_BASE				0xFFF03400
-#define HSDRAMC_BASE				0xFFF03800
-#define ECC_BASE				0xFFF03C00
-
-#endif /* __AT32AP7000_MEMORY_MAP_H__ */
diff --git a/include/asm-avr32/arch-at32ap7000/mmc.h b/include/asm-avr32/arch-at32ap7000/mmc.h
deleted file mode 100644
index fcfbbb3..0000000
--- a/include/asm-avr32/arch-at32ap7000/mmc.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __ASM_AVR32_MMC_H
-#define __ASM_AVR32_MMC_H
-
-struct mmc_cid {
-	unsigned long psn;
-	unsigned short oid;
-	unsigned char mid;
-	unsigned char prv;
-	unsigned char mdt;
-	char pnm[7];
-};
-
-struct mmc_csd
-{
-	u8	csd_structure:2,
-		spec_vers:4,
-		rsvd1:2;
-	u8	taac;
-	u8	nsac;
-	u8	tran_speed;
-	u16	ccc:12,
-		read_bl_len:4;
-	u64	read_bl_partial:1,
-		write_blk_misalign:1,
-		read_blk_misalign:1,
-		dsr_imp:1,
-		rsvd2:2,
-		c_size:12,
-		vdd_r_curr_min:3,
-		vdd_r_curr_max:3,
-		vdd_w_curr_min:3,
-		vdd_w_curr_max:3,
-		c_size_mult:3,
-		sector_size:5,
-		erase_grp_size:5,
-		wp_grp_size:5,
-		wp_grp_enable:1,
-		default_ecc:2,
-		r2w_factor:3,
-		write_bl_len:4,
-		write_bl_partial:1,
-		rsvd3:5;
-	u8	file_format_grp:1,
-		copy:1,
-		perm_write_protect:1,
-		tmp_write_protect:1,
-		file_format:2,
-		ecc:2;
-	u8	crc:7;
-	u8	one:1;
-};
-
-/* MMC Command numbers */
-#define MMC_CMD_GO_IDLE_STATE		0
-#define MMC_CMD_SEND_OP_COND		1
-#define MMC_CMD_ALL_SEND_CID 		2
-#define MMC_CMD_SET_RELATIVE_ADDR	3
-#define MMC_CMD_SD_SEND_RELATIVE_ADDR	3
-#define MMC_CMD_SET_DSR			4
-#define MMC_CMD_SELECT_CARD		7
-#define MMC_CMD_SEND_CSD 		9
-#define MMC_CMD_SEND_CID 		10
-#define MMC_CMD_SEND_STATUS		13
-#define MMC_CMD_SET_BLOCKLEN		16
-#define MMC_CMD_READ_SINGLE_BLOCK	17
-#define MMC_CMD_READ_MULTIPLE_BLOCK	18
-#define MMC_CMD_WRITE_BLOCK		24
-#define MMC_CMD_APP_CMD			55
-
-#define MMC_ACMD_SD_SEND_OP_COND	41
-
-#define R1_ILLEGAL_COMMAND		(1 << 22)
-#define R1_APP_CMD			(1 << 5)
-
-#endif /* __ASM_AVR32_MMC_H */
diff --git a/include/asm-avr32/arch-at32ap700x/chip-features.h b/include/asm-avr32/arch-at32ap700x/chip-features.h
new file mode 100644
index 0000000..29b1fd6
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap700x/chip-features.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_ARCH_CHIP_FEATURES_H__
+#define __ASM_AVR32_ARCH_CHIP_FEATURES_H__
+
+/* Currently, all the AP700x chips have these */
+#define AT32AP700x_CHIP_HAS_USART
+#define AT32AP700x_CHIP_HAS_MMCI
+
+/* Only AP7000 has ethernet interface */
+#ifdef CONFIG_AT32AP7000
+#define AT32AP700x_CHIP_HAS_MACB
+#endif
+
+#endif /* __ASM_AVR32_ARCH_CHIP_FEATURES_H__ */
diff --git a/include/asm-avr32/arch-at32ap700x/clk.h b/include/asm-avr32/arch-at32ap700x/clk.h
new file mode 100644
index 0000000..ea84c08
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap700x/clk.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_ARCH_CLK_H__
+#define __ASM_AVR32_ARCH_CLK_H__
+
+#include <asm/arch/chip-features.h>
+
+#ifdef CONFIG_PLL
+#define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL)
+#else
+#define MAIN_CLK_RATE (CFG_OSC0_HZ)
+#endif
+
+static inline unsigned long get_cpu_clk_rate(void)
+{
+	return MAIN_CLK_RATE >> CFG_CLKDIV_CPU;
+}
+static inline unsigned long get_hsb_clk_rate(void)
+{
+	return MAIN_CLK_RATE >> CFG_CLKDIV_HSB;
+}
+static inline unsigned long get_pba_clk_rate(void)
+{
+	return MAIN_CLK_RATE >> CFG_CLKDIV_PBA;
+}
+static inline unsigned long get_pbb_clk_rate(void)
+{
+	return MAIN_CLK_RATE >> CFG_CLKDIV_PBB;
+}
+
+/* Accessors for specific devices. More will be added as needed. */
+static inline unsigned long get_sdram_clk_rate(void)
+{
+	return get_hsb_clk_rate();
+}
+#ifdef AT32AP700x_CHIP_HAS_USART
+static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
+{
+	return get_pba_clk_rate();
+}
+#endif
+#ifdef AT32AP700x_CHIP_HAS_USART
+static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
+{
+	return get_pbb_clk_rate();
+}
+static inline unsigned long get_macb_hclk_rate(unsigned int dev_id)
+{
+	return get_hsb_clk_rate();
+}
+#endif
+#ifdef AT32AP700x_CHIP_HAS_MMCI
+static inline unsigned long get_mci_clk_rate(void)
+{
+	return get_pbb_clk_rate();
+}
+#endif
+
+#endif /* __ASM_AVR32_ARCH_CLK_H__ */
diff --git a/include/asm-avr32/arch-at32ap700x/gpio.h b/include/asm-avr32/arch-at32ap700x/gpio.h
new file mode 100644
index 0000000..b10a3e4
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap700x/gpio.h
@@ -0,0 +1,220 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_ARCH_GPIO_H__
+#define __ASM_AVR32_ARCH_GPIO_H__
+
+#include <asm/arch/chip-features.h>
+#include <asm/arch/memory-map.h>
+
+#define NR_GPIO_CONTROLLERS	5
+
+/*
+ * Pin numbers identifying specific GPIO pins on the chip.
+ */
+#define GPIO_PIOA_BASE	(0)
+#define GPIO_PIN_PA0	(GPIO_PIOA_BASE +  0)
+#define GPIO_PIN_PA1	(GPIO_PIOA_BASE +  1)
+#define GPIO_PIN_PA2	(GPIO_PIOA_BASE +  2)
+#define GPIO_PIN_PA3	(GPIO_PIOA_BASE +  3)
+#define GPIO_PIN_PA4	(GPIO_PIOA_BASE +  4)
+#define GPIO_PIN_PA5	(GPIO_PIOA_BASE +  5)
+#define GPIO_PIN_PA6	(GPIO_PIOA_BASE +  6)
+#define GPIO_PIN_PA7	(GPIO_PIOA_BASE +  7)
+#define GPIO_PIN_PA8	(GPIO_PIOA_BASE +  8)
+#define GPIO_PIN_PA9	(GPIO_PIOA_BASE +  9)
+#define GPIO_PIN_PA10	(GPIO_PIOA_BASE + 10)
+#define GPIO_PIN_PA11	(GPIO_PIOA_BASE + 11)
+#define GPIO_PIN_PA12	(GPIO_PIOA_BASE + 12)
+#define GPIO_PIN_PA13	(GPIO_PIOA_BASE + 13)
+#define GPIO_PIN_PA14	(GPIO_PIOA_BASE + 14)
+#define GPIO_PIN_PA15	(GPIO_PIOA_BASE + 15)
+#define GPIO_PIN_PA16	(GPIO_PIOA_BASE + 16)
+#define GPIO_PIN_PA17	(GPIO_PIOA_BASE + 17)
+#define GPIO_PIN_PA18	(GPIO_PIOA_BASE + 18)
+#define GPIO_PIN_PA19	(GPIO_PIOA_BASE + 19)
+#define GPIO_PIN_PA20	(GPIO_PIOA_BASE + 20)
+#define GPIO_PIN_PA21	(GPIO_PIOA_BASE + 21)
+#define GPIO_PIN_PA22	(GPIO_PIOA_BASE + 22)
+#define GPIO_PIN_PA23	(GPIO_PIOA_BASE + 23)
+#define GPIO_PIN_PA24	(GPIO_PIOA_BASE + 24)
+#define GPIO_PIN_PA25	(GPIO_PIOA_BASE + 25)
+#define GPIO_PIN_PA26	(GPIO_PIOA_BASE + 26)
+#define GPIO_PIN_PA27	(GPIO_PIOA_BASE + 27)
+#define GPIO_PIN_PA28	(GPIO_PIOA_BASE + 28)
+#define GPIO_PIN_PA29	(GPIO_PIOA_BASE + 29)
+#define GPIO_PIN_PA30	(GPIO_PIOA_BASE + 30)
+#define GPIO_PIN_PA31	(GPIO_PIOA_BASE + 31)
+
+#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
+#define GPIO_PIN_PB0	(GPIO_PIOB_BASE +  0)
+#define GPIO_PIN_PB1	(GPIO_PIOB_BASE +  1)
+#define GPIO_PIN_PB2	(GPIO_PIOB_BASE +  2)
+#define GPIO_PIN_PB3	(GPIO_PIOB_BASE +  3)
+#define GPIO_PIN_PB4	(GPIO_PIOB_BASE +  4)
+#define GPIO_PIN_PB5	(GPIO_PIOB_BASE +  5)
+#define GPIO_PIN_PB6	(GPIO_PIOB_BASE +  6)
+#define GPIO_PIN_PB7	(GPIO_PIOB_BASE +  7)
+#define GPIO_PIN_PB8	(GPIO_PIOB_BASE +  8)
+#define GPIO_PIN_PB9	(GPIO_PIOB_BASE +  9)
+#define GPIO_PIN_PB10	(GPIO_PIOB_BASE + 10)
+#define GPIO_PIN_PB11	(GPIO_PIOB_BASE + 11)
+#define GPIO_PIN_PB12	(GPIO_PIOB_BASE + 12)
+#define GPIO_PIN_PB13	(GPIO_PIOB_BASE + 13)
+#define GPIO_PIN_PB14	(GPIO_PIOB_BASE + 14)
+#define GPIO_PIN_PB15	(GPIO_PIOB_BASE + 15)
+#define GPIO_PIN_PB16	(GPIO_PIOB_BASE + 16)
+#define GPIO_PIN_PB17	(GPIO_PIOB_BASE + 17)
+#define GPIO_PIN_PB18	(GPIO_PIOB_BASE + 18)
+#define GPIO_PIN_PB19	(GPIO_PIOB_BASE + 19)
+#define GPIO_PIN_PB20	(GPIO_PIOB_BASE + 20)
+#define GPIO_PIN_PB21	(GPIO_PIOB_BASE + 21)
+#define GPIO_PIN_PB22	(GPIO_PIOB_BASE + 22)
+#define GPIO_PIN_PB23	(GPIO_PIOB_BASE + 23)
+#define GPIO_PIN_PB24	(GPIO_PIOB_BASE + 24)
+#define GPIO_PIN_PB25	(GPIO_PIOB_BASE + 25)
+#define GPIO_PIN_PB26	(GPIO_PIOB_BASE + 26)
+#define GPIO_PIN_PB27	(GPIO_PIOB_BASE + 27)
+#define GPIO_PIN_PB28	(GPIO_PIOB_BASE + 28)
+#define GPIO_PIN_PB29	(GPIO_PIOB_BASE + 29)
+#define GPIO_PIN_PB30	(GPIO_PIOB_BASE + 30)
+
+#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
+#define GPIO_PIN_PC0	(GPIO_PIOC_BASE +  0)
+#define GPIO_PIN_PC1	(GPIO_PIOC_BASE +  1)
+#define GPIO_PIN_PC2	(GPIO_PIOC_BASE +  2)
+#define GPIO_PIN_PC3	(GPIO_PIOC_BASE +  3)
+#define GPIO_PIN_PC4	(GPIO_PIOC_BASE +  4)
+#define GPIO_PIN_PC5	(GPIO_PIOC_BASE +  5)
+#define GPIO_PIN_PC6	(GPIO_PIOC_BASE +  6)
+#define GPIO_PIN_PC7	(GPIO_PIOC_BASE +  7)
+#define GPIO_PIN_PC8	(GPIO_PIOC_BASE +  8)
+#define GPIO_PIN_PC9	(GPIO_PIOC_BASE +  9)
+#define GPIO_PIN_PC10	(GPIO_PIOC_BASE + 10)
+#define GPIO_PIN_PC11	(GPIO_PIOC_BASE + 11)
+#define GPIO_PIN_PC12	(GPIO_PIOC_BASE + 12)
+#define GPIO_PIN_PC13	(GPIO_PIOC_BASE + 13)
+#define GPIO_PIN_PC14	(GPIO_PIOC_BASE + 14)
+#define GPIO_PIN_PC15	(GPIO_PIOC_BASE + 15)
+#define GPIO_PIN_PC16	(GPIO_PIOC_BASE + 16)
+#define GPIO_PIN_PC17	(GPIO_PIOC_BASE + 17)
+#define GPIO_PIN_PC18	(GPIO_PIOC_BASE + 18)
+#define GPIO_PIN_PC19	(GPIO_PIOC_BASE + 19)
+#define GPIO_PIN_PC20	(GPIO_PIOC_BASE + 20)
+#define GPIO_PIN_PC21	(GPIO_PIOC_BASE + 21)
+#define GPIO_PIN_PC22	(GPIO_PIOC_BASE + 22)
+#define GPIO_PIN_PC23	(GPIO_PIOC_BASE + 23)
+#define GPIO_PIN_PC24	(GPIO_PIOC_BASE + 24)
+#define GPIO_PIN_PC25	(GPIO_PIOC_BASE + 25)
+#define GPIO_PIN_PC26	(GPIO_PIOC_BASE + 26)
+#define GPIO_PIN_PC27	(GPIO_PIOC_BASE + 27)
+#define GPIO_PIN_PC28	(GPIO_PIOC_BASE + 28)
+#define GPIO_PIN_PC29	(GPIO_PIOC_BASE + 29)
+#define GPIO_PIN_PC30	(GPIO_PIOC_BASE + 30)
+#define GPIO_PIN_PC31	(GPIO_PIOC_BASE + 31)
+
+#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
+#define GPIO_PIN_PD0	(GPIO_PIOD_BASE +  0)
+#define GPIO_PIN_PD1	(GPIO_PIOD_BASE +  1)
+#define GPIO_PIN_PD2	(GPIO_PIOD_BASE +  2)
+#define GPIO_PIN_PD3	(GPIO_PIOD_BASE +  3)
+#define GPIO_PIN_PD4	(GPIO_PIOD_BASE +  4)
+#define GPIO_PIN_PD5	(GPIO_PIOD_BASE +  5)
+#define GPIO_PIN_PD6	(GPIO_PIOD_BASE +  6)
+#define GPIO_PIN_PD7	(GPIO_PIOD_BASE +  7)
+#define GPIO_PIN_PD8	(GPIO_PIOD_BASE +  8)
+#define GPIO_PIN_PD9	(GPIO_PIOD_BASE +  9)
+#define GPIO_PIN_PD10	(GPIO_PIOD_BASE + 10)
+#define GPIO_PIN_PD11	(GPIO_PIOD_BASE + 11)
+#define GPIO_PIN_PD12	(GPIO_PIOD_BASE + 12)
+#define GPIO_PIN_PD13	(GPIO_PIOD_BASE + 13)
+#define GPIO_PIN_PD14	(GPIO_PIOD_BASE + 14)
+#define GPIO_PIN_PD15	(GPIO_PIOD_BASE + 15)
+#define GPIO_PIN_PD16	(GPIO_PIOD_BASE + 16)
+#define GPIO_PIN_PD17	(GPIO_PIOD_BASE + 17)
+
+#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
+#define GPIO_PIN_PE0	(GPIO_PIOE_BASE +  0)
+#define GPIO_PIN_PE1	(GPIO_PIOE_BASE +  1)
+#define GPIO_PIN_PE2	(GPIO_PIOE_BASE +  2)
+#define GPIO_PIN_PE3	(GPIO_PIOE_BASE +  3)
+#define GPIO_PIN_PE4	(GPIO_PIOE_BASE +  4)
+#define GPIO_PIN_PE5	(GPIO_PIOE_BASE +  5)
+#define GPIO_PIN_PE6	(GPIO_PIOE_BASE +  6)
+#define GPIO_PIN_PE7	(GPIO_PIOE_BASE +  7)
+#define GPIO_PIN_PE8	(GPIO_PIOE_BASE +  8)
+#define GPIO_PIN_PE9	(GPIO_PIOE_BASE +  9)
+#define GPIO_PIN_PE10	(GPIO_PIOE_BASE + 10)
+#define GPIO_PIN_PE11	(GPIO_PIOE_BASE + 11)
+#define GPIO_PIN_PE12	(GPIO_PIOE_BASE + 12)
+#define GPIO_PIN_PE13	(GPIO_PIOE_BASE + 13)
+#define GPIO_PIN_PE14	(GPIO_PIOE_BASE + 14)
+#define GPIO_PIN_PE15	(GPIO_PIOE_BASE + 15)
+#define GPIO_PIN_PE16	(GPIO_PIOE_BASE + 16)
+#define GPIO_PIN_PE17	(GPIO_PIOE_BASE + 17)
+#define GPIO_PIN_PE18	(GPIO_PIOE_BASE + 18)
+#define GPIO_PIN_PE19	(GPIO_PIOE_BASE + 19)
+#define GPIO_PIN_PE20	(GPIO_PIOE_BASE + 20)
+#define GPIO_PIN_PE21	(GPIO_PIOE_BASE + 21)
+#define GPIO_PIN_PE22	(GPIO_PIOE_BASE + 22)
+#define GPIO_PIN_PE23	(GPIO_PIOE_BASE + 23)
+#define GPIO_PIN_PE24	(GPIO_PIOE_BASE + 24)
+#define GPIO_PIN_PE25	(GPIO_PIOE_BASE + 25)
+#define GPIO_PIN_PE26	(GPIO_PIOE_BASE + 26)
+
+static inline void *gpio_pin_to_addr(unsigned int pin)
+{
+	switch (pin >> 5) {
+	case 0:
+		return (void *)PIOA_BASE;
+	case 1:
+		return (void *)PIOB_BASE;
+	case 2:
+		return (void *)PIOC_BASE;
+	case 3:
+		return (void *)PIOD_BASE;
+	case 4:
+		return (void *)PIOE_BASE;
+	default:
+		return NULL;
+	}
+}
+
+void gpio_select_periph_A(unsigned int pin, int use_pullup);
+void gpio_select_periph_B(unsigned int pin, int use_pullup);
+
+void gpio_enable_ebi(void);
+
+#ifdef AT32AP700x_CHIP_HAS_USART
+void gpio_enable_usart0(void);
+void gpio_enable_usart1(void);
+void gpio_enable_usart2(void);
+void gpio_enable_usart3(void);
+#endif
+#ifdef AT32AP700x_CHIP_HAS_MACB
+void gpio_enable_macb0(void);
+void gpio_enable_macb1(void);
+#endif
+#ifdef AT32AP700x_CHIP_HAS_MMCI
+void gpio_enable_mmci(void);
+#endif
+
+#endif /* __ASM_AVR32_ARCH_GPIO_H__ */
diff --git a/include/asm-avr32/arch-at32ap700x/hmatrix2.h b/include/asm-avr32/arch-at32ap700x/hmatrix2.h
new file mode 100644
index 0000000..b0e787a
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap700x/hmatrix2.h
@@ -0,0 +1,232 @@
+/*
+ * Register definition for the High-speed Bus Matrix
+ */
+#ifndef __ASM_AVR32_HMATRIX2_H__
+#define __ASM_AVR32_HMATRIX2_H__
+
+/* HMATRIX2 register offsets */
+#define HMATRIX2_MCFG0				0x0000
+#define HMATRIX2_MCFG1				0x0004
+#define HMATRIX2_MCFG2				0x0008
+#define HMATRIX2_MCFG3				0x000c
+#define HMATRIX2_MCFG4				0x0010
+#define HMATRIX2_MCFG5				0x0014
+#define HMATRIX2_MCFG6				0x0018
+#define HMATRIX2_MCFG7				0x001c
+#define HMATRIX2_MCFG8				0x0020
+#define HMATRIX2_MCFG9				0x0024
+#define HMATRIX2_MCFG10				0x0028
+#define HMATRIX2_MCFG11				0x002c
+#define HMATRIX2_MCFG12				0x0030
+#define HMATRIX2_MCFG13				0x0034
+#define HMATRIX2_MCFG14				0x0038
+#define HMATRIX2_MCFG15				0x003c
+#define HMATRIX2_SCFG0				0x0040
+#define HMATRIX2_SCFG1				0x0044
+#define HMATRIX2_SCFG2				0x0048
+#define HMATRIX2_SCFG3				0x004c
+#define HMATRIX2_SCFG4				0x0050
+#define HMATRIX2_SCFG5				0x0054
+#define HMATRIX2_SCFG6				0x0058
+#define HMATRIX2_SCFG7				0x005c
+#define HMATRIX2_SCFG8				0x0060
+#define HMATRIX2_SCFG9				0x0064
+#define HMATRIX2_SCFG10				0x0068
+#define HMATRIX2_SCFG11				0x006c
+#define HMATRIX2_SCFG12				0x0070
+#define HMATRIX2_SCFG13				0x0074
+#define HMATRIX2_SCFG14				0x0078
+#define HMATRIX2_SCFG15				0x007c
+#define HMATRIX2_PRAS0				0x0080
+#define HMATRIX2_PRBS0				0x0084
+#define HMATRIX2_PRAS1				0x0088
+#define HMATRIX2_PRBS1				0x008c
+#define HMATRIX2_PRAS2				0x0090
+#define HMATRIX2_PRBS2				0x0094
+#define HMATRIX2_PRAS3				0x0098
+#define HMATRIX2_PRBS3				0x009c
+#define HMATRIX2_PRAS4				0x00a0
+#define HMATRIX2_PRBS4				0x00a4
+#define HMATRIX2_PRAS5				0x00a8
+#define HMATRIX2_PRBS5				0x00ac
+#define HMATRIX2_PRAS6				0x00b0
+#define HMATRIX2_PRBS6				0x00b4
+#define HMATRIX2_PRAS7				0x00b8
+#define HMATRIX2_PRBS7				0x00bc
+#define HMATRIX2_PRAS8				0x00c0
+#define HMATRIX2_PRBS8				0x00c4
+#define HMATRIX2_PRAS9				0x00c8
+#define HMATRIX2_PRBS9				0x00cc
+#define HMATRIX2_PRAS10				0x00d0
+#define HMATRIX2_PRBS10				0x00d4
+#define HMATRIX2_PRAS11				0x00d8
+#define HMATRIX2_PRBS11				0x00dc
+#define HMATRIX2_PRAS12				0x00e0
+#define HMATRIX2_PRBS12				0x00e4
+#define HMATRIX2_PRAS13				0x00e8
+#define HMATRIX2_PRBS13				0x00ec
+#define HMATRIX2_PRAS14				0x00f0
+#define HMATRIX2_PRBS14				0x00f4
+#define HMATRIX2_PRAS15				0x00f8
+#define HMATRIX2_PRBS15				0x00fc
+#define HMATRIX2_MRCR				0x0100
+#define HMATRIX2_SFR0				0x0110
+#define HMATRIX2_SFR1				0x0114
+#define HMATRIX2_SFR2				0x0118
+#define HMATRIX2_SFR3				0x011c
+#define HMATRIX2_SFR4				0x0120
+#define HMATRIX2_SFR5				0x0124
+#define HMATRIX2_SFR6				0x0128
+#define HMATRIX2_SFR7				0x012c
+#define HMATRIX2_SFR8				0x0130
+#define HMATRIX2_SFR9				0x0134
+#define HMATRIX2_SFR10				0x0138
+#define HMATRIX2_SFR11				0x013c
+#define HMATRIX2_SFR12				0x0140
+#define HMATRIX2_SFR13				0x0144
+#define HMATRIX2_SFR14				0x0148
+#define HMATRIX2_SFR15				0x014c
+#define HMATRIX2_VERSION			0x01fc
+
+/* Bitfields in MCFG0 */
+#define HMATRIX2_ULBT_OFFSET			0
+#define HMATRIX2_ULBT_SIZE			3
+
+/* Bitfields in SCFG0 */
+#define HMATRIX2_SLOT_CYCLE_OFFSET		0
+#define HMATRIX2_SLOT_CYCLE_SIZE		8
+#define HMATRIX2_DEFMSTR_TYPE_OFFSET		16
+#define HMATRIX2_DEFMSTR_TYPE_SIZE		2
+#define HMATRIX2_FIXED_DEFMSTR_OFFSET		18
+#define HMATRIX2_FIXED_DEFMSTR_SIZE		4
+#define HMATRIX2_ARBT_OFFSET			24
+#define HMATRIX2_ARBT_SIZE			2
+
+/* Bitfields in PRAS0 */
+#define HMATRIX2_M0PR_OFFSET			0
+#define HMATRIX2_M0PR_SIZE			4
+#define HMATRIX2_M1PR_OFFSET			4
+#define HMATRIX2_M1PR_SIZE			4
+#define HMATRIX2_M2PR_OFFSET			8
+#define HMATRIX2_M2PR_SIZE			4
+#define HMATRIX2_M3PR_OFFSET			12
+#define HMATRIX2_M3PR_SIZE			4
+#define HMATRIX2_M4PR_OFFSET			16
+#define HMATRIX2_M4PR_SIZE			4
+#define HMATRIX2_M5PR_OFFSET			20
+#define HMATRIX2_M5PR_SIZE			4
+#define HMATRIX2_M6PR_OFFSET			24
+#define HMATRIX2_M6PR_SIZE			4
+#define HMATRIX2_M7PR_OFFSET			28
+#define HMATRIX2_M7PR_SIZE			4
+
+/* Bitfields in PRBS0 */
+#define HMATRIX2_M8PR_OFFSET			0
+#define HMATRIX2_M8PR_SIZE			4
+#define HMATRIX2_M9PR_OFFSET			4
+#define HMATRIX2_M9PR_SIZE			4
+#define HMATRIX2_M10PR_OFFSET			8
+#define HMATRIX2_M10PR_SIZE			4
+#define HMATRIX2_M11PR_OFFSET			12
+#define HMATRIX2_M11PR_SIZE			4
+#define HMATRIX2_M12PR_OFFSET			16
+#define HMATRIX2_M12PR_SIZE			4
+#define HMATRIX2_M13PR_OFFSET			20
+#define HMATRIX2_M13PR_SIZE			4
+#define HMATRIX2_M14PR_OFFSET			24
+#define HMATRIX2_M14PR_SIZE			4
+#define HMATRIX2_M15PR_OFFSET			28
+#define HMATRIX2_M15PR_SIZE			4
+
+/* Bitfields in MRCR */
+#define HMATRIX2_RBC0_OFFSET			0
+#define HMATRIX2_RBC0_SIZE			1
+#define HMATRIX2_RBC1_OFFSET			1
+#define HMATRIX2_RBC1_SIZE			1
+#define HMATRIX2_RBC2_OFFSET			2
+#define HMATRIX2_RBC2_SIZE			1
+#define HMATRIX2_RBC3_OFFSET			3
+#define HMATRIX2_RBC3_SIZE			1
+#define HMATRIX2_RBC4_OFFSET			4
+#define HMATRIX2_RBC4_SIZE			1
+#define HMATRIX2_RBC5_OFFSET			5
+#define HMATRIX2_RBC5_SIZE			1
+#define HMATRIX2_RBC6_OFFSET			6
+#define HMATRIX2_RBC6_SIZE			1
+#define HMATRIX2_RBC7_OFFSET			7
+#define HMATRIX2_RBC7_SIZE			1
+#define HMATRIX2_RBC8_OFFSET			8
+#define HMATRIX2_RBC8_SIZE			1
+#define HMATRIX2_RBC9_OFFSET			9
+#define HMATRIX2_RBC9_SIZE			1
+#define HMATRIX2_RBC10_OFFSET			10
+#define HMATRIX2_RBC10_SIZE			1
+#define HMATRIX2_RBC11_OFFSET			11
+#define HMATRIX2_RBC11_SIZE			1
+#define HMATRIX2_RBC12_OFFSET			12
+#define HMATRIX2_RBC12_SIZE			1
+#define HMATRIX2_RBC13_OFFSET			13
+#define HMATRIX2_RBC13_SIZE			1
+#define HMATRIX2_RBC14_OFFSET			14
+#define HMATRIX2_RBC14_SIZE			1
+#define HMATRIX2_RBC15_OFFSET			15
+#define HMATRIX2_RBC15_SIZE			1
+
+/* Bitfields in SFR0 */
+#define HMATRIX2_SFR_OFFSET			0
+#define HMATRIX2_SFR_SIZE			32
+
+/* Bitfields in SFR4 */
+#define HMATRIX2_CS1A_OFFSET			1
+#define HMATRIX2_CS1A_SIZE			1
+#define HMATRIX2_CS3A_OFFSET			3
+#define HMATRIX2_CS3A_SIZE			1
+#define HMATRIX2_CS4A_OFFSET			4
+#define HMATRIX2_CS4A_SIZE			1
+#define HMATRIX2_CS5A_OFFSET			5
+#define HMATRIX2_CS5A_SIZE			1
+#define HMATRIX2_DBPUC_OFFSET			8
+#define HMATRIX2_DBPUC_SIZE			1
+
+/* Bitfields in VERSION */
+#define HMATRIX2_VERSION_OFFSET			0
+#define HMATRIX2_VERSION_SIZE			12
+#define HMATRIX2_MFN_OFFSET			16
+#define HMATRIX2_MFN_SIZE			3
+
+/* Constants for ULBT */
+#define HMATRIX2_ULBT_INFINITE			0
+#define HMATRIX2_ULBT_SINGLE			1
+#define HMATRIX2_ULBT_FOUR_BEAT			2
+#define HMATRIX2_ULBT_SIXTEEN_BEAT		4
+
+/* Constants for DEFMSTR_TYPE */
+#define HMATRIX2_DEFMSTR_TYPE_NO_DEFAULT	0
+#define HMATRIX2_DEFMSTR_TYPE_LAST_DEFAULT	1
+#define HMATRIX2_DEFMSTR_TYPE_FIXED_DEFAULT	2
+
+/* Constants for ARBT */
+#define HMATRIX2_ARBT_ROUND_ROBIN		0
+#define HMATRIX2_ARBT_FIXED_PRIORITY		1
+
+/* Bit manipulation macros */
+#define HMATRIX2_BIT(name)					\
+	(1 << HMATRIX2_##name##_OFFSET)
+#define HMATRIX2_BF(name,value)					\
+	(((value) & ((1 << HMATRIX2_##name##_SIZE) - 1))	\
+	 << HMATRIX2_##name##_OFFSET)
+#define HMATRIX2_BFEXT(name,value)				\
+	(((value) >> HMATRIX2_##name##_OFFSET)			\
+	 & ((1 << HMATRIX2_##name##_SIZE) - 1))
+#define HMATRIX2_BFINS(name,value,old)				\
+	(((old) & ~(((1 << HMATRIX2_##name##_SIZE) - 1)		\
+		    << HMATRIX2_##name##_OFFSET))		\
+	 | HMATRIX2_BF(name,value))
+
+/* Register access macros */
+#define hmatrix2_readl(reg)					\
+	readl((void *)HMATRIX_BASE + HMATRIX2_##reg)
+#define hmatrix2_writel(reg,value)				\
+	writel((value), (void *)HMATRIX_BASE + HMATRIX2_##reg)
+
+#endif /* __ASM_AVR32_HMATRIX2_H__ */
diff --git a/include/asm-avr32/arch-at32ap700x/memory-map.h b/include/asm-avr32/arch-at32ap700x/memory-map.h
new file mode 100644
index 0000000..5513e88
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap700x/memory-map.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __AT32AP7000_MEMORY_MAP_H__
+#define __AT32AP7000_MEMORY_MAP_H__
+
+/* Devices on the High Speed Bus (HSB) */
+#define LCDC_BASE				0xFF000000
+#define DMAC_BASE				0xFF200000
+#define USB_FIFO				0xFF300000
+
+/* Devices on Peripheral Bus A (PBA) */
+#define SPI0_BASE				0xFFE00000
+#define SPI1_BASE				0xFFE00400
+#define TWI_BASE				0xFFE00800
+#define USART0_BASE				0xFFE00C00
+#define USART1_BASE				0xFFE01000
+#define USART2_BASE				0xFFE01400
+#define USART3_BASE				0xFFE01800
+#define SSC0_BASE				0xFFE01C00
+#define SSC1_BASE				0xFFE02000
+#define SSC2_BASE				0xFFE02400
+#define PIOA_BASE				0xFFE02800
+#define PIOB_BASE				0xFFE02C00
+#define PIOC_BASE				0xFFE03000
+#define PIOD_BASE				0xFFE03400
+#define PIOE_BASE				0xFFE03800
+#define PSIF_BASE				0xFFE03C00
+
+/* Devices on Peripheral Bus B (PBB) */
+#define SM_BASE					0xFFF00000
+#define INTC_BASE				0xFFF00400
+#define HMATRIX_BASE				0xFFF00800
+#define TIMER0_BASE				0xFFF00C00
+#define TIMER1_BASE				0xFFF01000
+#define PWM_BASE				0xFFF01400
+#define MACB0_BASE				0xFFF01800
+#define MACB1_BASE				0xFFF01C00
+#define DAC_BASE				0xFFF02000
+#define MMCI_BASE				0xFFF02400
+#define AUDIOC_BASE				0xFFF02800
+#define HISI_BASE				0xFFF02C00
+#define USB_BASE				0xFFF03000
+#define HSMC_BASE				0xFFF03400
+#define HSDRAMC_BASE				0xFFF03800
+#define ECC_BASE				0xFFF03C00
+
+#endif /* __AT32AP7000_MEMORY_MAP_H__ */
diff --git a/include/asm-avr32/arch-at32ap700x/mmc.h b/include/asm-avr32/arch-at32ap700x/mmc.h
new file mode 100644
index 0000000..fcfbbb3
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap700x/mmc.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_MMC_H
+#define __ASM_AVR32_MMC_H
+
+struct mmc_cid {
+	unsigned long psn;
+	unsigned short oid;
+	unsigned char mid;
+	unsigned char prv;
+	unsigned char mdt;
+	char pnm[7];
+};
+
+struct mmc_csd
+{
+	u8	csd_structure:2,
+		spec_vers:4,
+		rsvd1:2;
+	u8	taac;
+	u8	nsac;
+	u8	tran_speed;
+	u16	ccc:12,
+		read_bl_len:4;
+	u64	read_bl_partial:1,
+		write_blk_misalign:1,
+		read_blk_misalign:1,
+		dsr_imp:1,
+		rsvd2:2,
+		c_size:12,
+		vdd_r_curr_min:3,
+		vdd_r_curr_max:3,
+		vdd_w_curr_min:3,
+		vdd_w_curr_max:3,
+		c_size_mult:3,
+		sector_size:5,
+		erase_grp_size:5,
+		wp_grp_size:5,
+		wp_grp_enable:1,
+		default_ecc:2,
+		r2w_factor:3,
+		write_bl_len:4,
+		write_bl_partial:1,
+		rsvd3:5;
+	u8	file_format_grp:1,
+		copy:1,
+		perm_write_protect:1,
+		tmp_write_protect:1,
+		file_format:2,
+		ecc:2;
+	u8	crc:7;
+	u8	one:1;
+};
+
+/* MMC Command numbers */
+#define MMC_CMD_GO_IDLE_STATE		0
+#define MMC_CMD_SEND_OP_COND		1
+#define MMC_CMD_ALL_SEND_CID 		2
+#define MMC_CMD_SET_RELATIVE_ADDR	3
+#define MMC_CMD_SD_SEND_RELATIVE_ADDR	3
+#define MMC_CMD_SET_DSR			4
+#define MMC_CMD_SELECT_CARD		7
+#define MMC_CMD_SEND_CSD 		9
+#define MMC_CMD_SEND_CID 		10
+#define MMC_CMD_SEND_STATUS		13
+#define MMC_CMD_SET_BLOCKLEN		16
+#define MMC_CMD_READ_SINGLE_BLOCK	17
+#define MMC_CMD_READ_MULTIPLE_BLOCK	18
+#define MMC_CMD_WRITE_BLOCK		24
+#define MMC_CMD_APP_CMD			55
+
+#define MMC_ACMD_SD_SEND_OP_COND	41
+
+#define R1_ILLEGAL_COMMAND		(1 << 22)
+#define R1_APP_CMD			(1 << 5)
+
+#endif /* __ASM_AVR32_MMC_H */
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
new file mode 100644
index 0000000..0be5fcb
--- /dev/null
+++ b/include/configs/atngw100.h
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * Configuration settings for the AVR32 Network Gateway
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_AVR32			1
+#define CONFIG_AT32AP			1
+#define CONFIG_AT32AP7000		1
+#define CONFIG_ATNGW100			1
+
+#define CONFIG_ATNGW100_EXT_FLASH	1
+
+#define CFG_HZ				1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
+ * and the PBA bus to run at 1/4 the PLL frequency.
+ */
+#define CONFIG_PLL			1
+#define CFG_POWER_MANAGER		1
+#define CFG_OSC0_HZ			20000000
+#define CFG_PLL0_DIV			1
+#define CFG_PLL0_MUL			7
+#define CFG_PLL0_SUPPRESS_CYCLES	16
+#define CFG_CLKDIV_CPU			0
+#define CFG_CLKDIV_HSB			1
+#define CFG_CLKDIV_PBA			2
+#define CFG_CLKDIV_PBB			1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ *   icp = PLLOPT<2>
+ *   ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT			0x04
+
+#define CONFIG_USART1			1
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION		1
+
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+#define CONFIG_STACKSIZE		(2048)
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2"
+#define CONFIG_BOOTCOMMAND						\
+	"fsload; bootm"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY		1
+#define CONFIG_AUTOBOOT			1
+#define CONFIG_AUTOBOOT_KEYED		1
+#define CONFIG_AUTOBOOT_PROMPT				\
+        "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR	"d"
+#define CONFIG_AUTOBOOT_STOP_STR	" "
+
+/*
+ * After booting the board for the first time, new ethernet addresses
+ * should be generated and assigned to the environment variables
+ * "ethaddr" and "eth1addr". This is normally done during production.
+ */
+#define CONFIG_OVERWRITE_ETHADDR_ONCE	1
+#define CONFIG_NET_MULTI		1
+
+/*
+ * BOOTP/DHCP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+
+#define CONFIG_DOS_PARTITION		1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+
+#define CONFIG_ATMEL_USART		1
+#define CONFIG_MACB			1
+#define CONFIG_PIO2			1
+#define CFG_NR_PIOS			5
+#define CFG_HSDRAMC			1
+#define CONFIG_MMC			1
+
+#define CFG_DCACHE_LINESZ		32
+#define CFG_ICACHE_LINESZ		32
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+#define CFG_FLASH_BASE			0x00000000
+#define CFG_FLASH_SIZE			0x800000
+#define CFG_MAX_FLASH_BANKS		1
+#define CFG_MAX_FLASH_SECT		135
+
+#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE			0x24000000
+#define CFG_INTRAM_SIZE			0x8000
+
+#define CFG_SDRAM_BASE			0x10000000
+#define CFG_SDRAM_16BIT			1
+
+#define CFG_ENV_IS_IN_FLASH		1
+#define CFG_ENV_SIZE			65536
+#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN			(256*1024)
+#define CFG_MALLOC_END							\
+	({								\
+		DECLARE_GLOBAL_DATA_PTR;				\
+		CFG_SDRAM_BASE + gd->sdram_size;			\
+	})
+#define CFG_MALLOC_START		(CFG_MALLOC_END - CFG_MALLOC_LEN)
+
+#define CFG_DMA_ALLOC_LEN		(16384)
+
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00400000)
+#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT			"Uboot> "
+#define CFG_CBSIZE			256
+#define CFG_MAXARGS			16
+#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP			1
+
+#define CFG_MEMTEST_START		CFG_SDRAM_BASE
+#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x1f00000)
+
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index b33e26f..95aeab6 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -184,8 +184,8 @@
 #define CFG_MALLOC_LEN			(256*1024)
 #define CFG_DMA_ALLOC_LEN		(16384)
 
-/* Allow 2MB for the kernel run-time image */
-#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00200000)
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00400000)
 #define CFG_BOOTPARAMS_LEN		(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
new file mode 100644
index 0000000..194788b
--- /dev/null
+++ b/include/configs/atstk1003.h
@@ -0,0 +1,184 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Configuration settings for the ATSTK1003 CPU daughterboard
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_AVR32			1
+#define CONFIG_AT32AP			1
+#define CONFIG_AT32AP7001		1
+#define CONFIG_ATSTK1003		1
+#define CONFIG_ATSTK1000		1
+
+#define CONFIG_ATSTK1000_EXT_FLASH	1
+
+/*
+ * Timer clock frequency. We're using the CPU-internal COUNT register
+ * for this, so this is equivalent to the CPU core clock frequency
+ */
+#define CFG_HZ				1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
+ * PLL frequency.
+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ */
+#define CONFIG_PLL			1
+#define CFG_POWER_MANAGER		1
+#define CFG_OSC0_HZ			20000000
+#define CFG_PLL0_DIV			1
+#define CFG_PLL0_MUL			7
+#define CFG_PLL0_SUPPRESS_CYCLES	16
+/*
+ * Set the CPU running at:
+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ */
+#define CFG_CLKDIV_CPU			0
+/*
+ * Set the HSB running at:
+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ */
+#define CFG_CLKDIV_HSB			1
+/*
+ * Set the PBA running at:
+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ */
+#define CFG_CLKDIV_PBA			2
+/*
+ * Set the PBB running at:
+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ */
+#define CFG_CLKDIV_PBB			1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ *   icp = PLLOPT<2>
+ *   ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT			0x04
+
+#undef CONFIG_USART0
+#define CONFIG_USART1			1
+#undef CONFIG_USART2
+#undef CONFIG_USART3
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION		1
+
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+#define CONFIG_STACKSIZE		(2048)
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0 root=/dev/mmcblk0p1 rootwait"
+
+#define CONFIG_BOOTCOMMAND						\
+	"mmcinit; ext2load mmc 0:1 0x10400000 /boot/uImage; bootm"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY		1
+#define CONFIG_AUTOBOOT			1
+#define CONFIG_AUTOBOOT_KEYED		1
+#define CONFIG_AUTOBOOT_PROMPT				\
+	"Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR	"d"
+#define CONFIG_AUTOBOOT_STOP_STR	" "
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#define CONFIG_ATMEL_USART		1
+#define CONFIG_PIO2			1
+#define CFG_HSDRAMC			1
+#define CONFIG_MMC			1
+
+#define CFG_DCACHE_LINESZ		32
+#define CFG_ICACHE_LINESZ		32
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+/* External flash on STK1000 */
+#if 0
+#define CFG_FLASH_CFI			1
+#define CFG_FLASH_CFI_DRIVER		1
+#endif
+
+#define CFG_FLASH_BASE			0x00000000
+#define CFG_FLASH_SIZE			0x800000
+#define CFG_MAX_FLASH_BANKS		1
+#define CFG_MAX_FLASH_SECT		135
+
+#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE			0x24000000
+#define CFG_INTRAM_SIZE			0x8000
+
+#define CFG_SDRAM_BASE			0x10000000
+
+#define CFG_ENV_IS_IN_FLASH		1
+#define CFG_ENV_SIZE			65536
+#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN			(256*1024)
+
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00400000)
+#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT			"Uboot> "
+#define CFG_CBSIZE			256
+#define CFG_MAXARGS			16
+#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP			1
+
+#define CFG_MEMTEST_START		CFG_SDRAM_BASE
+#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x700000)
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
new file mode 100644
index 0000000..b81fc21
--- /dev/null
+++ b/include/configs/atstk1004.h
@@ -0,0 +1,185 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Configuration settings for the ATSTK1003 CPU daughterboard
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_AVR32			1
+#define CONFIG_AT32AP			1
+#define CONFIG_AT32AP7002		1
+#define CONFIG_ATSTK1004		1
+#define CONFIG_ATSTK1000		1
+
+#define CONFIG_ATSTK1000_EXT_FLASH	1
+
+/*
+ * Timer clock frequency. We're using the CPU-internal COUNT register
+ * for this, so this is equivalent to the CPU core clock frequency
+ */
+#define CFG_HZ				1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
+ * PLL frequency.
+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ */
+#define CONFIG_PLL			1
+#define CFG_POWER_MANAGER		1
+#define CFG_OSC0_HZ			20000000
+#define CFG_PLL0_DIV			1
+#define CFG_PLL0_MUL			7
+#define CFG_PLL0_SUPPRESS_CYCLES	16
+/*
+ * Set the CPU running at:
+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ */
+#define CFG_CLKDIV_CPU			0
+/*
+ * Set the HSB running at:
+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ */
+#define CFG_CLKDIV_HSB			1
+/*
+ * Set the PBA running at:
+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ */
+#define CFG_CLKDIV_PBA			2
+/*
+ * Set the PBB running at:
+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ */
+#define CFG_CLKDIV_PBB			1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ *   icp = PLLOPT<2>
+ *   ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT			0x04
+
+#undef CONFIG_USART0
+#define CONFIG_USART1			1
+#undef CONFIG_USART2
+#undef CONFIG_USART3
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION		1
+
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+#define CONFIG_STACKSIZE		(2048)
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0 root=/dev/mmcblk0p1 rootwait"
+
+#define CONFIG_BOOTCOMMAND						\
+	"mmcinit; ext2load mmc 0:1 0x10200000 /boot/uImage; bootm"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY		1
+#define CONFIG_AUTOBOOT			1
+#define CONFIG_AUTOBOOT_KEYED		1
+#define CONFIG_AUTOBOOT_PROMPT				\
+	"Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR	"d"
+#define CONFIG_AUTOBOOT_STOP_STR	" "
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#define CONFIG_ATMEL_USART		1
+#define CONFIG_PIO2			1
+#define CFG_HSDRAMC			1
+#define CONFIG_MMC			1
+
+#define CFG_DCACHE_LINESZ		32
+#define CFG_ICACHE_LINESZ		32
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+/* External flash on STK1000 */
+#if 0
+#define CFG_FLASH_CFI			1
+#define CFG_FLASH_CFI_DRIVER		1
+#endif
+
+#define CFG_FLASH_BASE			0x00000000
+#define CFG_FLASH_SIZE			0x800000
+#define CFG_MAX_FLASH_BANKS		1
+#define CFG_MAX_FLASH_SECT		135
+
+#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE			0x24000000
+#define CFG_INTRAM_SIZE			0x8000
+
+#define CFG_SDRAM_BASE			0x10000000
+#define CFG_SDRAM_16BIT			1
+
+#define CFG_ENV_IS_IN_FLASH		1
+#define CFG_ENV_SIZE			65536
+#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN			(256*1024)
+
+/* Allow 2MB for the kernel run-time image */
+#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00200000)
+#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT			"Uboot> "
+#define CFG_CBSIZE			256
+#define CFG_MAXARGS			16
+#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP			1
+
+#define CFG_MEMTEST_START		CFG_SDRAM_BASE
+#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x700000)
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */
diff --git a/lib_avr32/board.c b/lib_avr32/board.c
index 11d864f..4729e58 100644
--- a/lib_avr32/board.c
+++ b/lib_avr32/board.c
@@ -264,6 +264,7 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
 #ifndef CFG_ENV_IS_NOWHERE
 	extern char * env_name_spec;
 #endif
+	char *s;
 	cmd_tbl_t *cmdtp;
 	bd_t *bd;
 
@@ -334,11 +335,20 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
 	/* initialize environment */
 	env_relocate();
 
+	bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
+
 	devices_init();
 	jumptable_init();
 	console_init_r();
 
+	s = getenv("loadaddr");
+	if (s)
+		load_addr = simple_strtoul(s, NULL, 16);
+
 #if defined(CONFIG_CMD_NET)
+	s = getenv("bootfile");
+	if (s)
+		copy_filename(BootFile, s, sizeof(BootFile));
 #if defined(CONFIG_NET_MULTI)
 	puts("Net:   ");
 #endif
diff --git a/net/eth.c b/net/eth.c
index 1b56a35..3e24a4c 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -60,6 +60,7 @@ extern int npe_initialize(bd_t *);
 extern int uec_initialize(int);
 extern int bfin_EMAC_initialize(bd_t *);
 extern int atstk1000_eth_initialize(bd_t *);
+extern int atngw100_eth_initialize(bd_t *);
 extern int mcffec_initialize(bd_t*);
 
 static struct eth_device *eth_devices, *eth_current;
@@ -254,6 +255,9 @@ int eth_initialize(bd_t *bis)
 #if defined(CONFIG_ATSTK1000)
 	atstk1000_eth_initialize(bis);
 #endif
+#if defined(CONFIG_ATNGW100)
+	atngw100_eth_initialize(bis);
+#endif
 #if defined(CONFIG_MCFFEC)
 	mcffec_initialize(bis);
 #endif