From db7d99359d62b05a1f6e2c551106b7bf26764889 Mon Sep 17 00:00:00 2001
From: Hugues Hiegel <hugues@hiegel.fr>
Date: Mon, 18 Nov 2013 21:04:19 +0100
Subject: 3.3.0.3 -> 3.3.0.5

---
 cfg/sliemu_f1_2013_v2.sli | 166 +++++++++++++++++++++++-----------------------
 1 file changed, 84 insertions(+), 82 deletions(-)

(limited to 'cfg/sliemu_f1_2013_v2.sli')

diff --git a/cfg/sliemu_f1_2013_v2.sli b/cfg/sliemu_f1_2013_v2.sli
index 028b7c5..673068d 100644
--- a/cfg/sliemu_f1_2013_v2.sli
+++ b/cfg/sliemu_f1_2013_v2.sli
@@ -1,82 +1,84 @@
-<?xml version="1.0" encoding="utf-8"?>
-<settings version="SLIPREFS02" flag="16" value=" " info="SLI-EMU F1 2013 settings with KERS feedback  #~http://www.eksimracing.com">
-	<GLOBAL info="global device options overridden" flag="0">
-		<MAXGEARATSTARTUP flag="0" info="Enter the max gear value at startup from 4 to 7 (default 4)#~Simulation doesn't provide the max gear of current car#~so by default the software set the max gear to the minimum (i.e. gear 4)  and increase this value when you shift and go beyond this limit.  Increase this value if you only use one car class with the same gearbox  (i.e. F1 car use 7)." value="7"/>
-		<LASTGEARNORPM flag="0" value="true" info="No shiftlights (RPM Leds) feedback with last gear. it will not display any shiftlights feedback on last gear if it set to true. Typically using on OVAL track or by F1 class car."/>
-		<LOWFUEL flag="0" info="Enter the number of laps remaining in tank before activate the Low Fuel warning feedback (default 4). The average of liter per lap is calculated dynamically." value="3"/>
-		<LASTLAPNOFUELWARNING flag="0" value="true" info="true to deactivate Low Fuel warning during last lap (default false)"/>
-		<OSPFACTOR flag="0" info="Adjust the standard optimal shiftpoint curve by changing the OSPFactor value from 10% to 150% (hard to supersafe) or by entering this param: hard, demanding, normal, safe, supersafe This value is ignored when custom OSP settings exists" value="40%"/>
-		<PITFEEDBACK flag="0" info="This option displays 'PIT' on left digits panel and speed on right panel when car pits (default false)." value="true"/>
-	</GLOBAL>
-	<GENERAL info="Common device options" flag="31">
-		<REVERSE flag="31" info="choose the reverse char (* for blank char)" value="r"/>
-		<NEUTRAL value="n" info="choose the neutral char (* for blank char)" flag="31"/>
-		<PHONEIP flag="16" info="Enter the IP address (i.e. 192.168.0.153) of your Android Phone or Tablet (enter 0.0.0.0 to deactivate). Your Phone and your PC must be connected to your network. Your SmartPhone on  WIFI  and your PC on Ethernet or Wifi.#~#~ATTENTION: You must restart SLIMax Manager II for the changes to take effect!" value="NONE"/>
-	</GENERAL>
-	<SLIEMU info="SLI-EMU options" flag="16">
-		<HELP flag="16" value=" " info="Define the default value for speed-limiter method, left and right panel function, max left and right functions, Quick-Info left and right function"/>
-		<SPDLMTMETHOD flag="22" info="SPD LMT Methods functions are defined in speedlimiter.lua script. Enter a value from 0 to 5 (default 3)" value="3"/>
-		<SPDLMTRPMLEDONLY flag="22" value="false" info="Enter true if you want to blink the RPM led without the speedlimiter led when speedlimiter is activated."/>
-		<LEFTDIGITSPANELS flag="16" value="1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20" info="Double-Click 'LEFTDIGITSPANELS' tag to assign left panel functions and apply your change. These functions are defined in slipro.lua script#~Custom Script can change the default behavior.#~These Functions ARE Not Available In All Simulation/Game"/>
-		<RIGHTDIGITSPANELS flag="16" value="11,12,1,2,3,22,24,23" info="Double-Click 'RIGHTDIGITSPANELS' tag to assign right panel functions (time related functions) and apply your change. These functions are defined in slipro.lua script#~Custom Script can change the default behavior.#~These Functions ARE Not Available In All Simulation/Game"/>
-		<QIFUNCTIONLEFT flag="22" value="3" info="Enter the corresponding function number (0 to deactivate) to show the info on left digits while you keep the button assigned to QIButton pressed (see the functions list in the slipro.lua script or by editing LEFTDIGITSPANELS tag)."/>
-		<QIFUNCTIONRIGHT flag="22" value="2" info="Enter the corresponding function number (0 to deactivate) to show the info on right digits while you keep the button assigned to QIButton pressed (see the functions list in slipro.lua script or by editing RIGHTDIGITSPANELS tag)."/>
-		<BUTTONSCHARSMAPPING flag="38" info="Buttons from 1 to 32: Activate (true) or deactivate (false) button mapping to char function" value="false"/>
-		<BTNCHARLIST flag="38" value="NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA" info="Map each button to char (from button 1 to 32) double-click BTNCHARLIST to open the wizard panel and do your mapping."/>
-		<SW1CHARSMAPPING value="false" flag="38" info="Switch 1: Activate (true) or deactivate (false) switch mapping to char function"/>
-		<SW1CHARS value="NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA" flag="38" info="set each position of switch to map it to char (up to 12 mapping per switch)"/>
-		<SW2CHARSMAPPING value="false" flag="38" info="Switch 2: Activate (true) or deactivate (false) switch mapping to char function"/>
-		<SW2CHARS value="NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA" flag="38" info="set each position of switch to map it to char (up to 12 mapping per switch)"/>
-	</SLIEMU>
-	<SHIFTPOINTS info="Shiftpoints is calculated on fly and depend the car you drive (see method below)" flag="22">
-		<HELP info="OSP Feedback method is defined in osp.lua script and contains the following methods: #~#~0 default  two std blue led blinking#~1 two std blue led blinking + shiftlights rpm blue blinking#~2 normal blinking + shiftlights rpm blue no blinking#~3 shiftlights rpm blue only no blinking#~4 shiftlights rpm blue only blinking" flag="22"/>
-		<SHIFTPOINTSMETHOD info="Enter the type of OSP feedback (method used) from 0 to 4 (default 0)." flag="22" value="3"/>
-	</SHIFTPOINTS>
-	<LED flag="22" value=" " info="####### Leds Layout  ######">
-		<HELP info="Set the corresponding function for each led from 1 to 11#~(6 extra and 5 external)#~#~RESET LED what does it means?#~#~well, by default all led are reseted before applying its new state, typically ON or OFF and this work fine if you have each led function assigned to ONE led only!#~#~But now, let say you have TC and Pit-Request on the same led. If you allow reset for both function TC can't be ON if the Pit-Request is OFF! #~PitReq function is after TC (see the priority order below) and will reset the state of TC...#~#~In other words, to avoid reseting the led you just have to put false in the 2th function this way the led will stay highlighted if one of the two function state is ON... clear? hope so!#~#~Here the current priority order of all functions :#~#~Ignition (supersede all other with no led and 'E' displayed)#~shiftpoint#~speedlimiter#~low fuel#~TC#~ALB#~Green flag#~Yellow flag#~Red flag#~Overheating#~Damage#~PitReq and InPits#~Power#~RevLimit#~Headlights#~SafePrefs#~IMPORTANT External method (supersede all other if activated)" flag="22"/>
-		<LEDOPTIMALSHIFTPOINTRIGHT value="6" info="set if you want to have a shiftpoint feedback on one or two led, value from led 1 to 11 (zero to deactivate)" flag="22"/>
-		<LEDOPTIMALSHIFTPOINTLEFT value="1" info="set if you want to have a shiftpoint feedback on one or two led, value from led 1 to 11 (zero to deactivate)" flag="22"/>
-		<LEDSPEEDLIMITER value="5" info="set if you want to have a speedlimiter feedback, value from led 1 to 11 (zero to deactivate)" flag="22"/>
-		<LEDLOWFUEL value="2" info="set if you want to have a low fuel feedback value from led 1 to 11 (zero to deactivate)" flag="22"/>
-		<RESETLEDTRACTIONCONTROL value="true" info="set if you want to have a TC feedback" flag="22"/>
-		<LEDTRACTIONCONTROL value="4" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
-		<RESETLEDANTILOCKBRAKES value="true" info="set if you want to have a anti-lock brakes feedback" flag="22"/>
-		<LEDANTILOCKBRAKES value="3" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
-		<RESETLEDGREENFLAG value="true" info="set if you want to have a green flag feedback (not implemented in all API)" flag="22"/>
-		<LEDGREENFLAG value="9" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
-		<RESETLEDYELLOWFLAG value="false" info="set if you want to have a yellow flag feedback (not implemented in all API)" flag="22"/>
-		<LEDYELLOWFLAG value="2" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
-		<RESETLEDREDFLAG value="true" info="set if you want to have a red flag feedback (not implemented in all API)" flag="22"/>
-		<LEDREDFLAG value="8" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
-		<RESETLEDDAMAGE value="false" info="set if you want to have a damage feedback (not implemented in all API)" flag="22"/>
-		<LEDDAMAGE value="3" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
-		<RESETLEDOVERHEATING value="false" info="set if you want to have an overheating feedback" flag="22"/>
-		<LEDOVERHEATING value="3" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
-		<RESETLEDREVLIMIT value="true" info="set if you want to have the revlimit feedback" flag="22"/>
-		<LEDREVLIMIT value="8" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
-		<RESETLEDPOWER value="true" info="set if you want to have a power ON/OFF feedback" flag="22"/>
-		<LEDPOWER value="11" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
-		<RESETLEDPITREQUEST value="false" info="set if you want to have a pit request and inpits feedback" flag="22"/>
-		<LEDPITREQUEST value="6" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
-		<RESETLEDHEADLIGHTS value="true" info="set if you want to have a headlights feedback" flag="22"/>
-		<LEDHEADLIGHTS info="value from led 1 to 11  (zero to deactivate)" flag="22" value="10"/>
-		<RESETLEDSAFEPREFS value="false" info="set when SafePrefs toggle button is ON" flag="22"/>
-		<LEDSAFEPREFS value="10" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
-		<RESETLEDBLUEFLAG value="false" info="set if you want to have a blue flag feedback (not implemented in all API)" flag="22"/>
-		<LEDBLUEFLAG value="1" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
-		<RESETLEDDRS value="false" info="set if you want to have a DRS feedback (not implemented in all API)" flag="38"/>
-		<LEDDRS value="4" info="value from led 1 to 11  (zero to deactivate)" flag="38"/>
-		<RESETLEDDRSLEGAL value="false" info="set if you want to have a DRS lagal status (not implemented in all API)" flag="38"/>
-		<LEDDRSLEGAL value="8" info="value from led 1 to 11  (zero to deactivate)" flag="38"/>
-	</LED>
-	<SHIFTLIGHTS info="Shiftlights options" flag="31">
-		<HELP info="SHIFTLIGHTS Methods Information defined in shiftlights.lua script." flag="31"/>
-		<SHIFTLIGHTSTYPE flag="31" info="SHIFTLIGHTS Methods Functions are defined in shiftlights.lua script. the default implementation contains the following methods:#~0 Progressive,#~1 all green/red/blue alternatively,#~2 percentage method,#~3 absolute method (not recommended), #~4 from side to center" value="5"/>
-		<RPMVALUES flag="22" value="50,55,60,65,70,75,80,85,90,95,97,98,99" info="Individual RPM threshold value in percentage for shiftlights , for all 13 leds #~set the value of each led from 0 to 100%#~*Double-Click 'RPMVALUES' tag to edit RPM values and apply your change"/>
-		<RPMABSOLUTE flag="22" value="15452,15545,15823,16354,16410,16675,17252,17545,17823,18354,18510,18655,18675" info="Individual RPM threshold value for shiftlights, for all 13 leds #~set the value of each led from 0 to 20000%#~*Double-Click 'RPMABSOLUTE' tag to edit RPM values and apply your change"/>
-	</SHIFTLIGHTS>
-	<BRIGHTNESS info="Global and indivudual brightness options" flag="22">
-		<GLOBALBRIGHTNESS flag="22" info="GLOBAL BRIGHTNESS from 1 to 100%, (default 98%), use an encoder (2 inputs) to decrease or increase brightness." value="75%"/>
-		<BRIGHTSTEP flag="22" value="10" info="Set the step for brightness adjustment (default 10)"/>
-	</BRIGHTNESS>
-</settings>
+<?xml version="1.0" encoding="utf-8"?>
+<settings version="SLIPREFS02" flag="16" value=" " info="SLI-EMU F1 2013 settings with KERS feedback  #~http://www.eksimracing.com">
+	<GLOBAL info="global device options overridden" flag="0">
+	<MAXGEARATSTARTUP flag="0" info="Enter the max gear value at startup from 4 to 7 (default 4)#~Simulation doesn't provide the max gear of current car#~so by default the software set the max gear to the minimum (i.e. gear 4)  and increase this value when you shift and go beyond this limit.  Increase this value if you only use one car class with the same gearbox  (i.e. F1 car use 7)." value="7"/>
+	<LASTGEARNORPM flag="0" value="true" info="No shiftlights (RPM Leds) feedback with last gear. it will not display any shiftlights feedback on last gear if it set to true. Typically using on OVAL track or by F1 class car."/>
+	<LOWFUEL flag="0" info="Enter the number of laps remaining in tank before activate the Low Fuel warning feedback (default 4). The average of liter per lap is calculated dynamically." value="3"/>
+	<LASTLAPNOFUELWARNING flag="0" value="true" info="true to deactivate Low Fuel warning during last lap (default false)"/>
+	<OSPFACTOR flag="0" info="Adjust the standard optimal shiftpoint curve by changing the OSPFactor value from 10% to 150% (hard to supersafe) or by entering this param: hard, demanding, normal, safe, supersafe This value is ignored when custom OSP settings exists" value="40%"/>
+	<PITFEEDBACK flag="0" info="This option displays 'PIT' on left digits panel and speed on right panel when car pits (default false)." value="true"/>
+	</GLOBAL>
+	<GENERAL info="Common device options" flag="31">
+	<REVERSE flag="31" info="choose the reverse char (* for blank char)" value="r"/>
+	<NEUTRAL value="n" info="choose the neutral char (* for blank char)" flag="31"/>
+	<PHONEIP flag="16" info="Enter the IP address (i.e. 192.168.0.153) of your Android Phone or Tablet (enter 0.0.0.0 to deactivate). Your Phone and your PC must be connected to your network. Your SmartPhone on  WIFI  and your PC on Ethernet or Wifi.#~#~ATTENTION: You must restart SLIMax Manager II for the changes to take effect!" value="NONE"/>
+	<COMBOSETUP value="true" info="Set to true if it's a COMBO SETUP associated with one or more script" flag="0"/>
+	<COMBOFUNCTIONS value="MAXGEARATSTARTUP,OSPFACTOR" info="Combo Setup, list (comma delimited) of functions neutralized or dynamically set by the associated script" flag="0"/>
+	</GENERAL>
+	<SLIEMU info="SLI-EMU options" flag="16">
+	<HELP flag="16" value=" " info="Define the default value for speed-limiter method, left and right panel function, max left and right functions, Quick-Info left and right function"/>
+	<SPDLMTMETHOD flag="22" info="SPD LMT Methods functions are defined in speedlimiter.lua script. Enter a value from 0 to 5 (default 3)" value="3"/>
+	<SPDLMTRPMLEDONLY flag="22" value="false" info="Enter true if you want to blink the RPM led without the speedlimiter led when speedlimiter is activated."/>
+	<LEFTDIGITSPANELS flag="16" value="1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20" info="Double-Click 'LEFTDIGITSPANELS' tag to assign left panel functions and apply your change. These functions are defined in slipro.lua script#~Custom Script can change the default behavior.#~These Functions ARE Not Available In All Simulation/Game"/>
+	<RIGHTDIGITSPANELS flag="16" value="2,3,37,1,3,22,24,23,30,31,32" info="Double-Click 'RIGHTDIGITSPANELS' tag to assign right panel functions (time related functions) and apply your change. These functions are defined in slipro.lua script#~Custom Script can change the default behavior.#~These Functions ARE Not Available In All Simulation/Game"/>
+	<QIFUNCTIONLEFT flag="22" value="3" info="Enter the corresponding function number (0 to deactivate) to show the info on left digits while you keep the button assigned to QIButton pressed (see the functions list in the slipro.lua script or by editing LEFTDIGITSPANELS tag)."/>
+	<QIFUNCTIONRIGHT flag="22" value="2" info="Enter the corresponding function number (0 to deactivate) to show the info on right digits while you keep the button assigned to QIButton pressed (see the functions list in slipro.lua script or by editing RIGHTDIGITSPANELS tag)."/>
+	<BUTTONSCHARSMAPPING flag="38" info="Buttons from 1 to 32: Activate (true) or deactivate (false) button mapping to char function" value="false"/>
+	<BTNCHARLIST flag="38" value="NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA" info="Map each button to char (from button 1 to 32) double-click BTNCHARLIST to open the wizard panel and do your mapping."/>
+	<SW1CHARSMAPPING value="false" flag="38" info="Switch 1: Activate (true) or deactivate (false) switch mapping to char function"/>
+	<SW1CHARS value="NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA" flag="38" info="set each position of switch to map it to char (up to 12 mapping per switch)"/>
+	<SW2CHARSMAPPING value="false" flag="38" info="Switch 2: Activate (true) or deactivate (false) switch mapping to char function"/>
+	<SW2CHARS value="NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA,NA" flag="38" info="set each position of switch to map it to char (up to 12 mapping per switch)"/>
+	</SLIEMU>
+	<SHIFTPOINTS info="Shiftpoints is calculated on fly and depend the car you drive (see method below)" flag="22">
+	<HELP info="OSP Feedback method is defined in osp.lua script and contains the following methods: #~#~0 default  two std blue led blinking#~1 two std blue led blinking + shiftlights rpm blue blinking#~2 normal blinking + shiftlights rpm blue no blinking#~3 shiftlights rpm blue only no blinking#~4 shiftlights rpm blue only blinking" flag="22"/>
+	<SHIFTPOINTSMETHOD info="Enter the type of OSP feedback (method used) from 0 to 4 (default 0)." flag="22" value="3"/>
+	</SHIFTPOINTS>
+	<LED flag="22" value=" " info="####### Leds Layout  ######">
+	<HELP info="Set the corresponding function for each led from 1 to 11#~(6 extra and 5 external)#~#~RESET LED what does it means?#~#~well, by default all led are reseted before applying its new state, typically ON or OFF and this work fine if you have each led function assigned to ONE led only!#~#~But now, let say you have TC and Pit-Request on the same led. If you allow reset for both function TC can't be ON if the Pit-Request is OFF! #~PitReq function is after TC (see the priority order below) and will reset the state of TC...#~#~In other words, to avoid reseting the led you just have to put false in the 2th function this way the led will stay highlighted if one of the two function state is ON... clear? hope so!#~#~Here the current priority order of all functions :#~#~Ignition (supersede all other with no led and 'E' displayed)#~shiftpoint#~speedlimiter#~low fuel#~TC#~ALB#~Green flag#~Yellow flag#~Red flag#~Overheating#~Damage#~PitReq and InPits#~Power#~RevLimit#~Headlights#~SafePrefs#~IMPORTANT External method (supersede all other if activated)" flag="22"/>
+	<LEDOPTIMALSHIFTPOINTRIGHT value="6" info="set if you want to have a shiftpoint feedback on one or two led, value from led 1 to 11 (zero to deactivate)" flag="22"/>
+	<LEDOPTIMALSHIFTPOINTLEFT value="1" info="set if you want to have a shiftpoint feedback on one or two led, value from led 1 to 11 (zero to deactivate)" flag="22"/>
+	<LEDSPEEDLIMITER value="5" info="set if you want to have a speedlimiter feedback, value from led 1 to 11 (zero to deactivate)" flag="22"/>
+	<LEDLOWFUEL value="2" info="set if you want to have a low fuel feedback value from led 1 to 11 (zero to deactivate)" flag="22"/>
+	<RESETLEDTRACTIONCONTROL value="true" info="set if you want to have a TC feedback" flag="22"/>
+	<LEDTRACTIONCONTROL value="4" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
+	<RESETLEDANTILOCKBRAKES value="true" info="set if you want to have a anti-lock brakes feedback" flag="22"/>
+	<LEDANTILOCKBRAKES value="3" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
+	<RESETLEDGREENFLAG value="true" info="set if you want to have a green flag feedback (not implemented in all API)" flag="22"/>
+	<LEDGREENFLAG value="9" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
+	<RESETLEDYELLOWFLAG value="false" info="set if you want to have a yellow flag feedback (not implemented in all API)" flag="22"/>
+	<LEDYELLOWFLAG value="2" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
+	<RESETLEDREDFLAG value="true" info="set if you want to have a red flag feedback (not implemented in all API)" flag="22"/>
+	<LEDREDFLAG value="8" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
+	<RESETLEDDAMAGE value="false" info="set if you want to have a damage feedback (not implemented in all API)" flag="22"/>
+	<LEDDAMAGE value="3" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
+	<RESETLEDOVERHEATING value="false" info="set if you want to have an overheating feedback" flag="22"/>
+	<LEDOVERHEATING value="3" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
+	<RESETLEDREVLIMIT value="true" info="set if you want to have the revlimit feedback" flag="22"/>
+	<LEDREVLIMIT value="8" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
+	<RESETLEDPOWER value="true" info="set if you want to have a power ON/OFF feedback" flag="22"/>
+	<LEDPOWER value="11" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
+	<RESETLEDPITREQUEST value="false" info="set if you want to have a pit request and inpits feedback" flag="22"/>
+	<LEDPITREQUEST value="6" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
+	<RESETLEDHEADLIGHTS value="true" info="set if you want to have a headlights feedback" flag="22"/>
+	<LEDHEADLIGHTS info="value from led 1 to 11  (zero to deactivate)" flag="22" value="10"/>
+	<RESETLEDSAFEPREFS value="false" info="set when SafePrefs toggle button is ON" flag="22"/>
+	<LEDSAFEPREFS value="10" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
+	<RESETLEDBLUEFLAG value="false" info="set if you want to have a blue flag feedback (not implemented in all API)" flag="22"/>
+	<LEDBLUEFLAG value="1" info="value from led 1 to 11  (zero to deactivate)" flag="22"/>
+	<RESETLEDDRS value="false" info="set if you want to have a DRS feedback (not implemented in all API)" flag="38"/>
+	<LEDDRS value="4" info="value from led 1 to 11  (zero to deactivate)" flag="38"/>
+	<RESETLEDDRSLEGAL value="false" info="set if you want to have a DRS lagal status (not implemented in all API)" flag="38"/>
+	<LEDDRSLEGAL value="8" info="value from led 1 to 11  (zero to deactivate)" flag="38"/>
+	</LED>
+	<SHIFTLIGHTS info="Shiftlights options" flag="31">
+	<HELP info="SHIFTLIGHTS Methods Information defined in shiftlights.lua script." flag="31"/>
+	<SHIFTLIGHTSTYPE flag="31" info="SHIFTLIGHTS Methods Functions are defined in shiftlights.lua script. the default implementation contains the following methods:#~0 Progressive,#~1 all green/red/blue alternatively,#~2 percentage method,#~3 absolute method (not recommended), #~4 from side to center#~5 KERS Yellow And Alternate R/B#~6 Revers KERS Yellow And Alternate R/B#~7 Semi-Progressive F1 Style" value="5"/>
+	<RPMVALUES flag="22" value="50,55,60,65,70,75,80,85,90,95,97,98,99" info="Individual RPM threshold value in percentage for shiftlights , for all 13 leds #~set the value of each led from 0 to 100%#~*Double-Click 'RPMVALUES' tag to edit RPM values and apply your change"/>
+	<RPMABSOLUTE flag="22" value="15452,15545,15823,16354,16410,16675,17252,17545,17823,18354,18510,18655,18675" info="Individual RPM threshold value for shiftlights, for all 13 leds #~set the value of each led from 0 to 20000%#~*Double-Click 'RPMABSOLUTE' tag to edit RPM values and apply your change"/>
+	</SHIFTLIGHTS>
+	<BRIGHTNESS info="Global and indivudual brightness options" flag="22">
+	<GLOBALBRIGHTNESS flag="22" info="GLOBAL BRIGHTNESS from 1 to 100%, (default 98%), use an encoder (2 inputs) to decrease or increase brightness." value="75%"/>
+	<BRIGHTSTEP flag="22" value="10" info="Set the step for brightness adjustment (default 10)"/>
+	</BRIGHTNESS>
+</settings>
-- 
cgit v1.2.3