summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorThomas Petazzoni <thomas.petazzoni@free-electrons.com>2010-12-05 21:53:09 +0100
committerPeter Korsgaard <jacmet@sunsite.dk>2010-12-16 15:04:49 +0100
commit8356bda519796432ec6965fe95371a2c9e1305cc (patch)
treee369f12558329e1f24f5c129fa10282d06fe8a39
parent9459f037bf6dd3ee73b6a647cc83b6b98d4c7478 (diff)
Remove the few remaining unused Atmel-specific bits
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
-rw-r--r--target/device/Atmel/arch-arm/kernel-patches-2.6.27/linux-2.6.27-at91.patch.gzbin93020 -> 0 bytes
-rw-r--r--target/device/Atmel/arch-arm/kernel-patches-2.6.28/linux-2.6.28-at91.patch.bz2bin67725 -> 0 bytes
-rw-r--r--target/device/Atmel/arch-arm/kernel-patches-2.6.28/linux-2.6.28-exp.patch.bz2bin56841 -> 0 bytes
-rw-r--r--target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-100-avr32.patch16813
-rw-r--r--target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-201-avr32-atmel_mpopfb-disable-debug.patch23
-rw-r--r--target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-202-avr32-atmel_mpopfb-add-signal-to-disable-line-caching.patch43
-rw-r--r--target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-203-avr32-fix-arch-header-byteorder.patch35
-rw-r--r--target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-204-avr32-ap700x-fix-det_pin-for-nand-flash.patch33
-rw-r--r--target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-100-avr32-atmel.1.patch26786
-rw-r--r--target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-200-avr32-remove.note.gnu.build-id-section.patch27
-rw-r--r--target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-201-avr32-atmel_mpopfb-disable-debug.patch23
-rw-r--r--target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-202-avr32-atmel_mpopfb-add-signal-to-disable-line-caching.patch59
-rw-r--r--target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-203-avr32-fix-arch-header-byteorder.patch35
-rw-r--r--target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-204-avr32-ap700x-fix-det_pin-for-nand-flash.patch31
-rw-r--r--target/device/Atmel/misc-patches/README2
-rw-r--r--target/device/Atmel/misc-patches/u-boot-1.3.0-200MHz-ngw100.patch20
-rw-r--r--target/device/Atmel/misc-patches/u-boot-1.3.0-64MB-sdram-ngw100.patch11
-rw-r--r--target/device/Atmel/root/device_table.txt162
-rw-r--r--target/device/Atmel/root/skel.patch71
-rw-r--r--target/device/Atmel/root/skel.tar.gzbin629 -> 0 bytes
-rw-r--r--target/device/Atmel/root/target_skeleton/bin/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/boot/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/config/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/dev/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/etc/TZ1
-rw-r--r--target/device/Atmel/root/target_skeleton/etc/fstab9
-rw-r--r--target/device/Atmel/root/target_skeleton/etc/group16
-rw-r--r--target/device/Atmel/root/target_skeleton/etc/hostname1
-rw-r--r--target/device/Atmel/root/target_skeleton/etc/hosts1
-rwxr-xr-xtarget/device/Atmel/root/target_skeleton/etc/init.d/S20urandom54
-rwxr-xr-xtarget/device/Atmel/root/target_skeleton/etc/init.d/S40network35
-rwxr-xr-xtarget/device/Atmel/root/target_skeleton/etc/init.d/rcS27
-rw-r--r--target/device/Atmel/root/target_skeleton/etc/inittab45
-rw-r--r--target/device/Atmel/root/target_skeleton/etc/inputrc44
-rw-r--r--target/device/Atmel/root/target_skeleton/etc/issue3
-rw-r--r--target/device/Atmel/root/target_skeleton/etc/ld.so.conf1
-rw-r--r--target/device/Atmel/root/target_skeleton/etc/ld.so.conf.d/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/etc/network/interfaces4
-rw-r--r--target/device/Atmel/root/target_skeleton/etc/passwd15
-rw-r--r--target/device/Atmel/root/target_skeleton/etc/profile48
-rw-r--r--target/device/Atmel/root/target_skeleton/etc/protocols31
-rw-r--r--target/device/Atmel/root/target_skeleton/etc/random-seedbin512 -> 0 bytes
-rw-r--r--target/device/Atmel/root/target_skeleton/etc/securetty12
-rw-r--r--target/device/Atmel/root/target_skeleton/etc/services302
-rw-r--r--target/device/Atmel/root/target_skeleton/etc/shadow12
-rw-r--r--target/device/Atmel/root/target_skeleton/home/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/lib/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/mnt/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/opt/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/proc/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/root/.bash_history0
-rw-r--r--target/device/Atmel/root/target_skeleton/root/.bash_logout7
-rw-r--r--target/device/Atmel/root/target_skeleton/root/.bash_profile15
-rw-r--r--target/device/Atmel/root/target_skeleton/root/.bashrc48
-rw-r--r--target/device/Atmel/root/target_skeleton/root/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/sbin/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/sys/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/tmp/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/usr/bin/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/usr/include/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/usr/lib/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/usr/man/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/usr/sbin/.empty0
-rwxr-xr-xtarget/device/Atmel/root/target_skeleton/usr/share/udhcpc/default.script39
-rw-r--r--target/device/Atmel/root/target_skeleton/usr/src/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/var/cache/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/var/lib/pcmcia/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/var/lock/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/var/log/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/var/pcmcia/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/var/run/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/var/spool/.empty0
-rw-r--r--target/device/Atmel/root/target_skeleton/var/tmp/.empty0
-rw-r--r--target/device/Atmel/root/uClibc.config167
74 files changed, 0 insertions, 45111 deletions
diff --git a/target/device/Atmel/arch-arm/kernel-patches-2.6.27/linux-2.6.27-at91.patch.gz b/target/device/Atmel/arch-arm/kernel-patches-2.6.27/linux-2.6.27-at91.patch.gz
deleted file mode 100644
index 8acde845b..000000000
--- a/target/device/Atmel/arch-arm/kernel-patches-2.6.27/linux-2.6.27-at91.patch.gz
+++ /dev/null
Binary files differ
diff --git a/target/device/Atmel/arch-arm/kernel-patches-2.6.28/linux-2.6.28-at91.patch.bz2 b/target/device/Atmel/arch-arm/kernel-patches-2.6.28/linux-2.6.28-at91.patch.bz2
deleted file mode 100644
index 7069c54dd..000000000
--- a/target/device/Atmel/arch-arm/kernel-patches-2.6.28/linux-2.6.28-at91.patch.bz2
+++ /dev/null
Binary files differ
diff --git a/target/device/Atmel/arch-arm/kernel-patches-2.6.28/linux-2.6.28-exp.patch.bz2 b/target/device/Atmel/arch-arm/kernel-patches-2.6.28/linux-2.6.28-exp.patch.bz2
deleted file mode 100644
index 9417b3aab..000000000
--- a/target/device/Atmel/arch-arm/kernel-patches-2.6.28/linux-2.6.28-exp.patch.bz2
+++ /dev/null
Binary files differ
diff --git a/target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-100-avr32.patch b/target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-100-avr32.patch
deleted file mode 100644
index 6512f77ef..000000000
--- a/target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-100-avr32.patch
+++ /dev/null
@@ -1,16813 +0,0 @@
-diff -urN linux-2.6.28.2-0rig//arch/arm/mach-at91/include/mach/cpu.h linux-2.6.28.2/arch/arm/mach-at91/include/mach/cpu.h
---- linux-2.6.28.2-0rig//arch/arm/mach-at91/include/mach/cpu.h 2009-01-29 08:39:33.000000000 +0100
-+++ linux-2.6.28.2/arch/arm/mach-at91/include/mach/cpu.h 2009-01-29 08:52:44.000000000 +0100
-@@ -99,5 +99,6 @@
- * definitions may reduce clutter in common drivers.
- */
- #define cpu_is_at32ap7000() (0)
-+#define cpu_is_at32ap7200() (0)
-
- #endif
-diff -urN linux-2.6.28.2-0rig//arch/avr32/boards/atstk1000/atstk1005.c linux-2.6.28.2/arch/avr32/boards/atstk1000/atstk1005.c
---- linux-2.6.28.2-0rig//arch/avr32/boards/atstk1000/atstk1005.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/boards/atstk1000/atstk1005.c 2009-01-29 08:52:48.000000000 +0100
-@@ -0,0 +1,225 @@
-+/*
-+ * ATSTK1005 daughterboard-specific init code
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/list.h>
-+#include <linux/string.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/spi/spi.h>
-+
-+#include <asm/atmel-mci.h>
-+#include <asm/setup.h>
-+
-+#include <mach/at32ap720x.h>
-+#include <mach/board.h>
-+#include <mach/init.h>
-+#include <mach/portmux.h>
-+#include <mach/smc.h>
-+
-+#include "atstk1000.h"
-+
-+/* Oscillator frequencies. These are board specific */
-+unsigned long at32_board_osc_rates[4] = {
-+ [0] = 20000000, /* 20 MHz on osc0 */
-+ [1] = 0, /* Nothing on osc1 */
-+ [2] = 12000000, /* 12 MHz on osc2 */
-+ [3] = 32768, /* 32.768 kHz on RTC osc */
-+};
-+
-+struct eth_addr {
-+ u8 addr[6];
-+};
-+
-+static struct eth_addr __initdata hw_addr;
-+static struct eth_platform_data __initdata eth_data;
-+
-+static struct mci_platform_data mci_data __initdata = {
-+ .slot[0] = {
-+ .detect_pin = GPIO_PIN_NONE,
-+ .wp_pin = GPIO_PIN_NONE,
-+ .bus_width = 4,
-+ },
-+ .slot[1] = {
-+ .detect_pin = GPIO_PIN_PA(30),
-+ .wp_pin = GPIO_PIN_PA(31),
-+ .bus_width = 8,
-+ },
-+};
-+
-+static struct spi_board_info spi0_board_info[] __initdata = {
-+ {
-+ /* AT45DB642D: 8MB DataFlash */
-+ .modalias = "mtd_dataflash",
-+ .max_speed_hz = 8000000,
-+ .chip_select = 0,
-+ .mode = SPI_MODE_0,
-+ }, {
-+ /* QVGA display */
-+ .modalias = "ltv350qv",
-+ .max_speed_hz = 8000000,
-+ .chip_select = 2,
-+ .mode = SPI_MODE_3,
-+ },
-+};
-+
-+static struct smc_timing nand_timing __initdata = {
-+ .ncs_read_setup = 0,
-+ .nrd_setup = 10,
-+ .ncs_write_setup = 0,
-+ .nwe_setup = 10,
-+
-+ .ncs_read_pulse = 30,
-+ .nrd_pulse = 15,
-+ .ncs_write_pulse = 30,
-+ .nwe_pulse = 15,
-+
-+ .read_cycle = 30,
-+ .write_cycle = 30,
-+
-+ .ncs_read_recover = 0,
-+ .nrd_recover = 15,
-+ .ncs_write_recover = 0,
-+ .nwe_recover = 50,
-+};
-+
-+static struct smc_config nand_config __initdata = {
-+ .bus_width = 1,
-+ .nrd_controlled = 1,
-+ .nwe_controlled = 1,
-+ .nwait_mode = 0,
-+ .byte_write = 0,
-+ .tdf_cycles = 3,
-+ .tdf_mode = 0,
-+};
-+
-+static struct mtd_partition nand_partitions[] = {
-+ {
-+ .name = "u-boot",
-+ .offset = 0,
-+ .size = 131072,
-+ }, {
-+ .name = "kernel",
-+ .offset = 262144,
-+ .size = 2097152,
-+ }, {
-+ .name = "user",
-+ .offset = 2359296,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+/* Isn't this rather more complicated than necessary? */
-+static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(nand_partitions);
-+ return nand_partitions;
-+}
-+
-+static struct atmel_nand_data nand_data __initdata = {
-+ .cle = 21,
-+ .ale = 22,
-+ .rdy_pin = GPIO_PIN_PE(31),
-+ .enable_pin = GPIO_PIN_PF(2),
-+ .det_pin = GPIO_PIN_NONE,
-+ .partition_info = nand_part_info,
-+};
-+
-+
-+/*
-+ * Grab ethernet address and PHY address provided by the boot loader.
-+ */
-+static int __init parse_tag_ethernet(struct tag *tag)
-+{
-+ struct tag_ethernet *etag = &tag->u.ethernet;
-+
-+ if (etag->mac_index == 0) {
-+ eth_data.phy_mask = ~(1U << etag->mii_phy_addr);
-+ memcpy(&hw_addr.addr, etag->hw_address, sizeof(hw_addr.addr));
-+ }
-+
-+ return 0;
-+}
-+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
-+
-+/*
-+ * We need to get rid of this crap and pass the mac address to the
-+ * driver explicitly.
-+ */
-+#include <linux/clk.h>
-+#include <linux/etherdevice.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/platform_device.h>
-+static void __init set_hw_addr(struct platform_device *pdev)
-+{
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ const u8 *addr;
-+ void __iomem *regs;
-+ struct clk *pclk;
-+
-+ if (!res)
-+ return;
-+ if (pdev->id != 0)
-+ return;
-+
-+ addr = hw_addr.addr;
-+ if (!is_valid_ether_addr(addr))
-+ return;
-+
-+ /*
-+ * Since this is board-specific code, we'll cheat and use the
-+ * physical address directly as we happen to know that it's
-+ * the same as the virtual address.
-+ */
-+ regs = (void __iomem __force *)res->start;
-+ pclk = clk_get(&pdev->dev, "pclk");
-+ if (!pclk)
-+ return;
-+
-+ clk_enable(pclk);
-+ __raw_writel((addr[3] << 24) | (addr[2] << 16)
-+ | (addr[1] << 8) | addr[0], regs + 0x98);
-+ __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
-+ clk_disable(pclk);
-+ clk_put(pclk);
-+}
-+
-+void __init setup_board(void)
-+{
-+ at32_map_usart(4, 0); /* USART4: /dev/ttyS0, DB9 */
-+ at32_setup_serial_console(0);
-+}
-+
-+static int __init atstk1005_init(void)
-+{
-+ struct platform_device *lcdc_pdev;
-+
-+ at32_add_device_usart(0);
-+
-+ set_hw_addr(at32_add_device_eth(0, &eth_data));
-+ lcdc_pdev = at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-+ fbmem_start, fbmem_size, 0);
-+ at32_add_device_mpop(0, lcdc_pdev, fbmem_start, fbmem_size);
-+ at32_add_device_mci(0, &mci_data);
-+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-+
-+ /* NAND Flash */
-+ smc_set_timing(&nand_config, &nand_timing);
-+ smc_set_configuration(3, &nand_config);
-+ at32_add_device_nand(0, &nand_data);
-+
-+ /* USB OHCI/EHCI host */
-+ at32_add_device_ohci(0);
-+ at32_add_device_ehci(0);
-+
-+ return 0;
-+}
-+postcore_initcall(atstk1005_init);
-diff -urN linux-2.6.28.2-0rig//arch/avr32/boards/atstk1000/Kconfig linux-2.6.28.2/arch/avr32/boards/atstk1000/Kconfig
---- linux-2.6.28.2-0rig//arch/avr32/boards/atstk1000/Kconfig 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/boards/atstk1000/Kconfig 2009-01-29 08:52:48.000000000 +0100
-@@ -18,6 +18,10 @@
- bool "ATSTK1004"
- select CPU_AT32AP7002
-
-+config BOARD_ATSTK1005
-+ bool "ATSTK1005"
-+ select CPU_AT32AP7200
-+
- config BOARD_ATSTK1006
- bool "ATSTK1006"
- select CPU_AT32AP7000
-diff -urN linux-2.6.28.2-0rig//arch/avr32/boards/atstk1000/Makefile linux-2.6.28.2/arch/avr32/boards/atstk1000/Makefile
---- linux-2.6.28.2-0rig//arch/avr32/boards/atstk1000/Makefile 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/boards/atstk1000/Makefile 2009-01-29 08:52:48.000000000 +0100
-@@ -2,4 +2,5 @@
- obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o
- obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o
- obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o
-+obj-$(CONFIG_BOARD_ATSTK1005) += atstk1005.o
- obj-$(CONFIG_BOARD_ATSTK1006) += atstk1002.o
-diff -urN linux-2.6.28.2-0rig//arch/avr32/configs/atngw100_defconfig linux-2.6.28.2/arch/avr32/configs/atngw100_defconfig
---- linux-2.6.28.2-0rig//arch/avr32/configs/atngw100_defconfig 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/configs/atngw100_defconfig 2009-01-29 08:52:48.000000000 +0100
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.27-rc1
--# Tue Aug 5 16:00:47 2008
-+# Linux kernel version: 2.6.27.4
-+# Thu Nov 13 14:33:33 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -130,11 +130,15 @@
- CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PORTMUX_PIO=y
- CONFIG_PLATFORM_AT32AP=y
- CONFIG_CPU_AT32AP700X=y
- CONFIG_CPU_AT32AP7000=y
- # CONFIG_BOARD_ATSTK1000 is not set
- CONFIG_BOARD_ATNGW100=y
-+# CONFIG_BOARD_FAVR_32 is not set
-+# CONFIG_BOARD_MIMC200 is not set
-+# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
- CONFIG_LOADER_U_BOOT=y
-
- #
-@@ -177,7 +181,7 @@
- # CONFIG_HZ_300 is not set
- # CONFIG_HZ_1000 is not set
- CONFIG_HZ=250
--# CONFIG_SCHED_HRTICK is not set
-+CONFIG_SCHED_HRTICK=y
- CONFIG_CMDLINE=""
-
- #
-@@ -615,6 +619,7 @@
- CONFIG_I2C=m
- CONFIG_I2C_BOARDINFO=y
- CONFIG_I2C_CHARDEV=m
-+CONFIG_I2C_HELPER_AUTO=y
- CONFIG_I2C_ALGOBIT=m
-
- #
-@@ -664,6 +669,7 @@
- #
- # SPI Master Controller Drivers
- #
-+CONFIG_SPI_ATMEL_HAVE_PDC=y
- CONFIG_SPI_ATMEL=y
- # CONFIG_SPI_BITBANG is not set
-
-@@ -706,7 +712,7 @@
- # Watchdog Device Drivers
- #
- # CONFIG_SOFT_WATCHDOG is not set
--CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32_WDT=y
-
- #
- # Sonics Silicon Backplane
-@@ -720,6 +726,7 @@
- # CONFIG_MFD_CORE is not set
- # CONFIG_MFD_SM501 is not set
- # CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-
- #
- # Multimedia devices
-@@ -751,11 +758,14 @@
- # CONFIG_DISPLAY_SUPPORT is not set
- # CONFIG_SOUND is not set
- CONFIG_USB_SUPPORT=y
--# CONFIG_USB_ARCH_HAS_HCD is not set
--# CONFIG_USB_ARCH_HAS_OHCI is not set
--# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+# CONFIG_USB is not set
- # CONFIG_USB_OTG_WHITELIST is not set
- # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+# CONFIG_USB_MUSB_HDRC is not set
-+# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-@@ -806,6 +816,7 @@
- #
- # CONFIG_MMC_SDHCI is not set
- CONFIG_MMC_ATMELMCI=y
-+# CONFIG_MMC_ATMELMCI_DMA is not set
- CONFIG_MMC_SPI=m
- # CONFIG_MEMSTICK is not set
- CONFIG_NEW_LEDS=y
-@@ -880,11 +891,13 @@
- # on-CPU RTC drivers
- #
- CONFIG_RTC_DRV_AT32AP700X=y
-+# CONFIG_RTC_DRV_AVR32_AST is not set
- CONFIG_DMADEVICES=y
-
- #
- # DMA Devices
- #
-+# CONFIG_ATMEL_PDCA is not set
- CONFIG_DW_DMAC=y
- CONFIG_DMA_ENGINE=y
-
-@@ -898,13 +911,13 @@
- #
- # File systems
- #
--CONFIG_EXT2_FS=m
-+CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
--CONFIG_EXT3_FS=m
-+CONFIG_EXT3_FS=y
- # CONFIG_EXT3_FS_XATTR is not set
- # CONFIG_EXT4DEV_FS is not set
--CONFIG_JBD=m
-+CONFIG_JBD=y
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
- # CONFIG_FS_POSIX_ACL is not set
-@@ -944,7 +957,7 @@
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--CONFIG_CONFIGFS_FS=m
-+CONFIG_CONFIGFS_FS=y
-
- #
- # Miscellaneous filesystems
-diff -urN linux-2.6.28.2-0rig//arch/avr32/configs/atstk1002_defconfig linux-2.6.28.2/arch/avr32/configs/atstk1002_defconfig
---- linux-2.6.28.2-0rig//arch/avr32/configs/atstk1002_defconfig 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/configs/atstk1002_defconfig 2009-01-29 08:52:49.000000000 +0100
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.27-rc1
--# Mon Aug 4 16:02:27 2008
-+# Linux kernel version: 2.6.27.4
-+# Wed Nov 12 10:28:45 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -129,20 +129,24 @@
- CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PORTMUX_PIO=y
- CONFIG_PLATFORM_AT32AP=y
- CONFIG_CPU_AT32AP700X=y
- CONFIG_CPU_AT32AP7000=y
- CONFIG_BOARD_ATSTK1000=y
- # CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_FAVR_32 is not set
-+# CONFIG_BOARD_MIMC200 is not set
- CONFIG_BOARD_ATSTK1002=y
- # CONFIG_BOARD_ATSTK1003 is not set
- # CONFIG_BOARD_ATSTK1004 is not set
-+# CONFIG_BOARD_ATSTK1005 is not set
- # CONFIG_BOARD_ATSTK1006 is not set
- # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
- # CONFIG_BOARD_ATSTK100X_SPI1 is not set
--# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-+CONFIG_BOARD_ATSTK1000_J2_LED=y
- # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
--# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-+CONFIG_BOARD_ATSTK1000_J2_RGB=y
- CONFIG_BOARD_ATSTK1000_EXTDAC=y
- CONFIG_LOADER_U_BOOT=y
-
-@@ -186,7 +190,7 @@
- # CONFIG_HZ_300 is not set
- # CONFIG_HZ_1000 is not set
- CONFIG_HZ=250
--# CONFIG_SCHED_HRTICK is not set
-+CONFIG_SCHED_HRTICK=y
- CONFIG_CMDLINE=""
-
- #
-@@ -360,7 +364,8 @@
- #
- CONFIG_MTD_CHAR=y
- CONFIG_MTD_BLKDEVS=y
--CONFIG_MTD_BLOCK=y
-+# CONFIG_MTD_BLOCK is not set
-+# CONFIG_MTD_BLOCK_RO is not set
- # CONFIG_FTL is not set
- # CONFIG_NFTL is not set
- # CONFIG_INFTL is not set
-@@ -421,12 +426,23 @@
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOC2001PLUS is not set
- # CONFIG_MTD_NAND is not set
-+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
- # CONFIG_MTD_ONENAND is not set
-
- #
- # UBI - Unsorted block images
- #
--# CONFIG_MTD_UBI is not set
-+CONFIG_MTD_UBI=y
-+CONFIG_MTD_UBI_WL_THRESHOLD=4096
-+CONFIG_MTD_UBI_BEB_RESERVE=1
-+# CONFIG_MTD_UBI_GLUEBI is not set
-+
-+#
-+# UBI debugging options
-+#
-+# CONFIG_MTD_UBI_DEBUG is not set
- # CONFIG_PARPORT is not set
- CONFIG_BLK_DEV=y
- # CONFIG_BLK_DEV_COW_COMMON is not set
-@@ -502,7 +518,7 @@
- # CONFIG_BONDING is not set
- # CONFIG_MACVLAN is not set
- # CONFIG_EQUALIZER is not set
--CONFIG_TUN=m
-+# CONFIG_TUN is not set
- # CONFIG_VETH is not set
- CONFIG_PHYLIB=y
-
-@@ -561,7 +577,7 @@
- #
- # Input device support
- #
--CONFIG_INPUT=m
-+CONFIG_INPUT=y
- # CONFIG_INPUT_FF_MEMLESS is not set
- CONFIG_INPUT_POLLDEV=m
-
-@@ -590,6 +606,8 @@
- CONFIG_INPUT_MOUSE=y
- # CONFIG_MOUSE_PS2 is not set
- # CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_APPLETOUCH is not set
-+# CONFIG_MOUSE_BCM5974 is not set
- # CONFIG_MOUSE_VSXXXAA is not set
- CONFIG_MOUSE_GPIO=m
- # CONFIG_INPUT_JOYSTICK is not set
-@@ -606,8 +624,12 @@
- #
- # Character devices
- #
--# CONFIG_VT is not set
--# CONFIG_DEVKMEM is not set
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
- # CONFIG_SERIAL_NONSTANDARD is not set
-
- #
-@@ -634,6 +656,7 @@
- CONFIG_I2C=m
- CONFIG_I2C_BOARDINFO=y
- CONFIG_I2C_CHARDEV=m
-+CONFIG_I2C_HELPER_AUTO=y
- CONFIG_I2C_ALGOBIT=m
-
- #
-@@ -663,7 +686,7 @@
- # Miscellaneous I2C Chip support
- #
- # CONFIG_DS1682 is not set
--CONFIG_AT24=m
-+# CONFIG_AT24 is not set
- # CONFIG_SENSORS_EEPROM is not set
- # CONFIG_SENSORS_PCF8574 is not set
- # CONFIG_PCF8575 is not set
-@@ -683,6 +706,7 @@
- #
- # SPI Master Controller Drivers
- #
-+CONFIG_SPI_ATMEL_HAVE_PDC=y
- CONFIG_SPI_ATMEL=y
- # CONFIG_SPI_BITBANG is not set
-
-@@ -725,7 +749,7 @@
- # Watchdog Device Drivers
- #
- # CONFIG_SOFT_WATCHDOG is not set
--CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32_WDT=y
-
- #
- # Sonics Silicon Backplane
-@@ -739,6 +763,7 @@
- # CONFIG_MFD_CORE is not set
- # CONFIG_MFD_SM501 is not set
- # CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-
- #
- # Multimedia devices
-@@ -784,6 +809,7 @@
- #
- # CONFIG_FB_S1D13XXX is not set
- CONFIG_FB_ATMEL=y
-+# CONFIG_FB_ATMEL_MPOP is not set
- # CONFIG_FB_VIRTUAL is not set
- CONFIG_BACKLIGHT_LCD_SUPPORT=y
- CONFIG_LCD_CLASS_DEVICE=y
-@@ -797,6 +823,12 @@
- # Display device support
- #
- # CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE is not set
- # CONFIG_LOGO is not set
- CONFIG_SOUND=m
- CONFIG_SND=m
-@@ -820,11 +852,14 @@
- # CONFIG_SOUND_PRIME is not set
- # CONFIG_HID_SUPPORT is not set
- CONFIG_USB_SUPPORT=y
--# CONFIG_USB_ARCH_HAS_HCD is not set
--# CONFIG_USB_ARCH_HAS_OHCI is not set
--# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+# CONFIG_USB is not set
- # CONFIG_USB_OTG_WHITELIST is not set
- # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+# CONFIG_USB_MUSB_HDRC is not set
-+# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-@@ -876,6 +911,7 @@
- #
- # CONFIG_MMC_SDHCI is not set
- CONFIG_MMC_ATMELMCI=y
-+# CONFIG_MMC_ATMELMCI_DMA is not set
- CONFIG_MMC_SPI=m
- # CONFIG_MEMSTICK is not set
- CONFIG_NEW_LEDS=y
-@@ -952,11 +988,13 @@
- # on-CPU RTC drivers
- #
- CONFIG_RTC_DRV_AT32AP700X=y
-+# CONFIG_RTC_DRV_AVR32_AST is not set
- CONFIG_DMADEVICES=y
-
- #
- # DMA Devices
- #
-+# CONFIG_ATMEL_PDCA is not set
- CONFIG_DW_DMAC=y
- CONFIG_DMA_ENGINE=y
-
-@@ -1017,7 +1055,7 @@
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--# CONFIG_CONFIGFS_FS is not set
-+CONFIG_CONFIGFS_FS=y
-
- #
- # Miscellaneous filesystems
-@@ -1031,7 +1069,8 @@
- # CONFIG_EFS_FS is not set
- CONFIG_JFFS2_FS=y
- CONFIG_JFFS2_FS_DEBUG=0
--# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
- # CONFIG_JFFS2_SUMMARY is not set
- # CONFIG_JFFS2_FS_XATTR is not set
- # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-@@ -1039,6 +1078,12 @@
- # CONFIG_JFFS2_LZO is not set
- CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
-+CONFIG_UBIFS_FS=y
-+CONFIG_UBIFS_FS_XATTR=y
-+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-+CONFIG_UBIFS_FS_LZO=y
-+CONFIG_UBIFS_FS_ZLIB=y
-+# CONFIG_UBIFS_FS_DEBUG is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_VXFS_FS is not set
- CONFIG_MINIX_FS=m
-@@ -1173,7 +1218,7 @@
- #
- # Crypto core or helper
- #
--CONFIG_CRYPTO_ALGAPI=m
-+CONFIG_CRYPTO_ALGAPI=y
- CONFIG_CRYPTO_AEAD=m
- CONFIG_CRYPTO_BLKCIPHER=m
- CONFIG_CRYPTO_HASH=m
-@@ -1247,8 +1292,8 @@
- #
- # Compression
- #
--CONFIG_CRYPTO_DEFLATE=m
--# CONFIG_CRYPTO_LZO is not set
-+CONFIG_CRYPTO_DEFLATE=y
-+CONFIG_CRYPTO_LZO=y
- # CONFIG_CRYPTO_HW is not set
-
- #
-@@ -1258,7 +1303,7 @@
- # CONFIG_GENERIC_FIND_FIRST_BIT is not set
- # CONFIG_GENERIC_FIND_NEXT_BIT is not set
- CONFIG_CRC_CCITT=m
--# CONFIG_CRC16 is not set
-+CONFIG_CRC16=y
- CONFIG_CRC_T10DIF=m
- CONFIG_CRC_ITU_T=m
- CONFIG_CRC32=y
-@@ -1266,6 +1311,8 @@
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
-+CONFIG_LZO_COMPRESS=y
-+CONFIG_LZO_DECOMPRESS=y
- CONFIG_GENERIC_ALLOCATOR=y
- CONFIG_PLIST=y
- CONFIG_HAS_IOMEM=y
-diff -urN linux-2.6.28.2-0rig//arch/avr32/configs/atstk1003_defconfig linux-2.6.28.2/arch/avr32/configs/atstk1003_defconfig
---- linux-2.6.28.2-0rig//arch/avr32/configs/atstk1003_defconfig 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/configs/atstk1003_defconfig 2009-01-29 08:52:49.000000000 +0100
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.27-rc1
--# Tue Aug 5 15:34:44 2008
-+# Linux kernel version: 2.6.27.4
-+# Wed Nov 12 10:33:33 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -34,12 +34,9 @@
- CONFIG_SYSVIPC=y
- CONFIG_SYSVIPC_SYSCTL=y
- CONFIG_POSIX_MQUEUE=y
--CONFIG_BSD_PROCESS_ACCT=y
--CONFIG_BSD_PROCESS_ACCT_V3=y
--CONFIG_TASKSTATS=y
--CONFIG_TASK_DELAY_ACCT=y
--# CONFIG_TASK_XACCT is not set
--CONFIG_AUDIT=y
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
- CONFIG_LOG_BUF_SHIFT=14
- # CONFIG_CGROUPS is not set
-@@ -71,7 +68,7 @@
- CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_VM_EVENT_COUNTERS=y
--# CONFIG_SLUB_DEBUG is not set
-+CONFIG_SLUB_DEBUG=y
- # CONFIG_SLAB is not set
- CONFIG_SLUB=y
- # CONFIG_SLOB is not set
-@@ -90,6 +87,7 @@
- CONFIG_HAVE_CLK=y
- CONFIG_PROC_PAGE_MONITOR=y
- # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-+CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=1
-@@ -131,20 +129,24 @@
- CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PORTMUX_PIO=y
- CONFIG_PLATFORM_AT32AP=y
- CONFIG_CPU_AT32AP700X=y
- CONFIG_CPU_AT32AP7001=y
- CONFIG_BOARD_ATSTK1000=y
- # CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_FAVR_32 is not set
-+# CONFIG_BOARD_MIMC200 is not set
- # CONFIG_BOARD_ATSTK1002 is not set
- CONFIG_BOARD_ATSTK1003=y
- # CONFIG_BOARD_ATSTK1004 is not set
-+# CONFIG_BOARD_ATSTK1005 is not set
- # CONFIG_BOARD_ATSTK1006 is not set
- # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
- # CONFIG_BOARD_ATSTK100X_SPI1 is not set
--# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-+CONFIG_BOARD_ATSTK1000_J2_LED=y
- # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
--# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-+CONFIG_BOARD_ATSTK1000_J2_RGB=y
- CONFIG_BOARD_ATSTK1000_EXTDAC=y
- CONFIG_LOADER_U_BOOT=y
-
-@@ -188,7 +190,7 @@
- # CONFIG_HZ_300 is not set
- # CONFIG_HZ_1000 is not set
- CONFIG_HZ=250
--# CONFIG_SCHED_HRTICK is not set
-+CONFIG_SCHED_HRTICK=y
- CONFIG_CMDLINE=""
-
- #
-@@ -239,40 +241,71 @@
- CONFIG_PACKET=y
- CONFIG_PACKET_MMAP=y
- CONFIG_UNIX=y
--# CONFIG_NET_KEY is not set
-+CONFIG_XFRM=y
-+CONFIG_XFRM_USER=m
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_XFRM_IPCOMP=m
-+CONFIG_NET_KEY=m
-+# CONFIG_NET_KEY_MIGRATE is not set
- CONFIG_INET=y
- # CONFIG_IP_MULTICAST is not set
- # CONFIG_IP_ADVANCED_ROUTER is not set
- CONFIG_IP_FIB_HASH=y
--# CONFIG_IP_PNP is not set
--# CONFIG_NET_IPIP is not set
--# CONFIG_NET_IPGRE is not set
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+CONFIG_NET_IPIP=m
-+CONFIG_NET_IPGRE=m
- # CONFIG_ARPD is not set
- # CONFIG_SYN_COOKIES is not set
--# CONFIG_INET_AH is not set
--# CONFIG_INET_ESP is not set
-+CONFIG_INET_AH=m
-+CONFIG_INET_ESP=m
- # CONFIG_INET_IPCOMP is not set
- # CONFIG_INET_XFRM_TUNNEL is not set
--# CONFIG_INET_TUNNEL is not set
--# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
--# CONFIG_INET_XFRM_MODE_TUNNEL is not set
--# CONFIG_INET_XFRM_MODE_BEET is not set
-+CONFIG_INET_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET_XFRM_MODE_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_BEET=m
- # CONFIG_INET_LRO is not set
--# CONFIG_INET_DIAG is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
- # CONFIG_TCP_CONG_ADVANCED is not set
- CONFIG_TCP_CONG_CUBIC=y
- CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_TCP_MD5SIG is not set
--# CONFIG_IPV6 is not set
-+CONFIG_IPV6=m
-+# CONFIG_IPV6_PRIVACY is not set
-+# CONFIG_IPV6_ROUTER_PREF is not set
-+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-+CONFIG_INET6_AH=m
-+CONFIG_INET6_ESP=m
-+CONFIG_INET6_IPCOMP=m
-+# CONFIG_IPV6_MIP6 is not set
-+CONFIG_INET6_XFRM_TUNNEL=m
-+CONFIG_INET6_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET6_XFRM_MODE_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_BEET=m
-+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-+CONFIG_IPV6_SIT=m
-+CONFIG_IPV6_NDISC_NODETYPE=y
-+CONFIG_IPV6_TUNNEL=m
-+# CONFIG_IPV6_MULTIPLE_TABLES is not set
-+# CONFIG_IPV6_MROUTE is not set
- # CONFIG_NETWORK_SECMARK is not set
- # CONFIG_NETFILTER is not set
- # CONFIG_IP_DCCP is not set
- # CONFIG_IP_SCTP is not set
- # CONFIG_TIPC is not set
- # CONFIG_ATM is not set
--# CONFIG_BRIDGE is not set
-+CONFIG_STP=m
-+CONFIG_BRIDGE=m
- # CONFIG_VLAN_8021Q is not set
- # CONFIG_DECNET is not set
-+CONFIG_LLC=m
- # CONFIG_LLC2 is not set
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
-@@ -331,7 +364,8 @@
- #
- CONFIG_MTD_CHAR=y
- CONFIG_MTD_BLKDEVS=y
--CONFIG_MTD_BLOCK=y
-+# CONFIG_MTD_BLOCK is not set
-+# CONFIG_MTD_BLOCK_RO is not set
- # CONFIG_FTL is not set
- # CONFIG_NFTL is not set
- # CONFIG_INFTL is not set
-@@ -397,7 +431,15 @@
- #
- # UBI - Unsorted block images
- #
--# CONFIG_MTD_UBI is not set
-+CONFIG_MTD_UBI=y
-+CONFIG_MTD_UBI_WL_THRESHOLD=4096
-+CONFIG_MTD_UBI_BEB_RESERVE=1
-+# CONFIG_MTD_UBI_GLUEBI is not set
-+
-+#
-+# UBI debugging options
-+#
-+# CONFIG_MTD_UBI_DEBUG is not set
- # CONFIG_PARPORT is not set
- CONFIG_BLK_DEV=y
- # CONFIG_BLK_DEV_COW_COMMON is not set
-@@ -458,9 +500,7 @@
- # CONFIG_SCSI_ISCSI_ATTRS is not set
- # CONFIG_SCSI_SAS_LIBSAS is not set
- # CONFIG_SCSI_SRP_ATTRS is not set
--CONFIG_SCSI_LOWLEVEL=y
--# CONFIG_ISCSI_TCP is not set
--# CONFIG_SCSI_DEBUG is not set
-+# CONFIG_SCSI_LOWLEVEL is not set
- # CONFIG_SCSI_DH is not set
- CONFIG_ATA=m
- # CONFIG_ATA_NONSTANDARD is not set
-@@ -477,7 +517,32 @@
- # CONFIG_EQUALIZER is not set
- # CONFIG_TUN is not set
- # CONFIG_VETH is not set
--# CONFIG_NET_ETHERNET is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+# CONFIG_MII is not set
-+CONFIG_MACB=y
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
- # CONFIG_NETDEV_1000 is not set
- # CONFIG_NETDEV_10000 is not set
-
-@@ -509,7 +574,7 @@
- #
- # Input device support
- #
--CONFIG_INPUT=m
-+CONFIG_INPUT=y
- # CONFIG_INPUT_FF_MEMLESS is not set
- CONFIG_INPUT_POLLDEV=m
-
-@@ -521,7 +586,7 @@
- CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
- CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
- # CONFIG_INPUT_JOYDEV is not set
--# CONFIG_INPUT_EVDEV is not set
-+CONFIG_INPUT_EVDEV=m
- # CONFIG_INPUT_EVBUG is not set
-
- #
-@@ -538,6 +603,8 @@
- CONFIG_INPUT_MOUSE=y
- # CONFIG_MOUSE_PS2 is not set
- # CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_APPLETOUCH is not set
-+# CONFIG_MOUSE_BCM5974 is not set
- # CONFIG_MOUSE_VSXXXAA is not set
- CONFIG_MOUSE_GPIO=m
- # CONFIG_INPUT_JOYSTICK is not set
-@@ -555,7 +622,7 @@
- # Character devices
- #
- # CONFIG_VT is not set
--# CONFIG_DEVKMEM is not set
-+CONFIG_DEVKMEM=y
- # CONFIG_SERIAL_NONSTANDARD is not set
-
- #
-@@ -582,6 +649,7 @@
- CONFIG_I2C=m
- CONFIG_I2C_BOARDINFO=y
- CONFIG_I2C_CHARDEV=m
-+CONFIG_I2C_HELPER_AUTO=y
- CONFIG_I2C_ALGOBIT=m
-
- #
-@@ -611,7 +679,7 @@
- # Miscellaneous I2C Chip support
- #
- # CONFIG_DS1682 is not set
--CONFIG_AT24=m
-+# CONFIG_AT24 is not set
- # CONFIG_SENSORS_EEPROM is not set
- # CONFIG_SENSORS_PCF8574 is not set
- # CONFIG_PCF8575 is not set
-@@ -631,6 +699,7 @@
- #
- # SPI Master Controller Drivers
- #
-+CONFIG_SPI_ATMEL_HAVE_PDC=y
- CONFIG_SPI_ATMEL=y
- # CONFIG_SPI_BITBANG is not set
-
-@@ -673,7 +742,7 @@
- # Watchdog Device Drivers
- #
- # CONFIG_SOFT_WATCHDOG is not set
--CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32_WDT=y
-
- #
- # Sonics Silicon Backplane
-@@ -687,6 +756,7 @@
- # CONFIG_MFD_CORE is not set
- # CONFIG_MFD_SM501 is not set
- # CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-
- #
- # Multimedia devices
-@@ -726,8 +796,8 @@
- CONFIG_SND_PCM_OSS=m
- CONFIG_SND_PCM_OSS_PLUGINS=y
- # CONFIG_SND_DYNAMIC_MINORS is not set
--CONFIG_SND_SUPPORT_OLD_API=y
--CONFIG_SND_VERBOSE_PROCFS=y
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+# CONFIG_SND_VERBOSE_PROCFS is not set
- # CONFIG_SND_VERBOSE_PRINTK is not set
- # CONFIG_SND_DEBUG is not set
- # CONFIG_SND_DRIVERS is not set
-@@ -738,11 +808,14 @@
- # CONFIG_SOUND_PRIME is not set
- # CONFIG_HID_SUPPORT is not set
- CONFIG_USB_SUPPORT=y
--# CONFIG_USB_ARCH_HAS_HCD is not set
--# CONFIG_USB_ARCH_HAS_OHCI is not set
--# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+# CONFIG_USB is not set
- # CONFIG_USB_OTG_WHITELIST is not set
- # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+# CONFIG_USB_MUSB_HDRC is not set
-+# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-@@ -750,7 +823,7 @@
- CONFIG_USB_GADGET=y
- # CONFIG_USB_GADGET_DEBUG is not set
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
--CONFIG_USB_GADGET_DEBUG_FS=y
-+# CONFIG_USB_GADGET_DEBUG_FS is not set
- CONFIG_USB_GADGET_SELECTED=y
- # CONFIG_USB_GADGET_AMD5536UDC is not set
- CONFIG_USB_GADGET_ATMEL_USBA=y
-@@ -787,33 +860,34 @@
- CONFIG_MMC_BLOCK=y
- CONFIG_MMC_BLOCK_BOUNCE=y
- # CONFIG_SDIO_UART is not set
--CONFIG_MMC_TEST=m
-+# CONFIG_MMC_TEST is not set
-
- #
- # MMC/SD Host Controller Drivers
- #
- # CONFIG_MMC_SDHCI is not set
- CONFIG_MMC_ATMELMCI=y
-+# CONFIG_MMC_ATMELMCI_DMA is not set
- CONFIG_MMC_SPI=m
- # CONFIG_MEMSTICK is not set
- CONFIG_NEW_LEDS=y
--CONFIG_LEDS_CLASS=y
-+CONFIG_LEDS_CLASS=m
-
- #
- # LED drivers
- #
- CONFIG_LEDS_ATMEL_PWM=m
- # CONFIG_LEDS_PCA9532 is not set
--CONFIG_LEDS_GPIO=y
-+CONFIG_LEDS_GPIO=m
- # CONFIG_LEDS_PCA955X is not set
-
- #
- # LED Triggers
- #
- CONFIG_LEDS_TRIGGERS=y
--CONFIG_LEDS_TRIGGER_TIMER=y
--CONFIG_LEDS_TRIGGER_HEARTBEAT=y
--CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-+CONFIG_LEDS_TRIGGER_TIMER=m
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
- # CONFIG_ACCESSIBILITY is not set
- CONFIG_RTC_LIB=y
- CONFIG_RTC_CLASS=y
-@@ -870,11 +944,13 @@
- # on-CPU RTC drivers
- #
- CONFIG_RTC_DRV_AT32AP700X=y
-+# CONFIG_RTC_DRV_AVR32_AST is not set
- CONFIG_DMADEVICES=y
-
- #
- # DMA Devices
- #
-+# CONFIG_ATMEL_PDCA is not set
- CONFIG_DW_DMAC=y
- CONFIG_DMA_ENGINE=y
-
-@@ -888,13 +964,13 @@
- #
- # File systems
- #
--CONFIG_EXT2_FS=m
-+CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
--CONFIG_EXT3_FS=m
-+CONFIG_EXT3_FS=y
- # CONFIG_EXT3_FS_XATTR is not set
- # CONFIG_EXT4DEV_FS is not set
--CONFIG_JBD=m
-+CONFIG_JBD=y
- # CONFIG_JBD_DEBUG is not set
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
-@@ -935,7 +1011,7 @@
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--CONFIG_CONFIGFS_FS=m
-+CONFIG_CONFIGFS_FS=y
-
- #
- # Miscellaneous filesystems
-@@ -958,16 +1034,39 @@
- # CONFIG_JFFS2_LZO is not set
- CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
-+CONFIG_UBIFS_FS=y
-+CONFIG_UBIFS_FS_XATTR=y
-+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-+CONFIG_UBIFS_FS_LZO=y
-+CONFIG_UBIFS_FS_ZLIB=y
-+# CONFIG_UBIFS_FS_DEBUG is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_VXFS_FS is not set
--# CONFIG_MINIX_FS is not set
-+CONFIG_MINIX_FS=m
- # CONFIG_OMFS_FS is not set
- # CONFIG_HPFS_FS is not set
- # CONFIG_QNX4FS_FS is not set
- # CONFIG_ROMFS_FS is not set
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
--# CONFIG_NETWORK_FILESYSTEMS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+CONFIG_ROOT_NFS=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-
- #
- # Partition Types
-@@ -1036,6 +1135,8 @@
- # CONFIG_SCHEDSTATS is not set
- # CONFIG_TIMER_STATS is not set
- # CONFIG_DEBUG_OBJECTS is not set
-+# CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_SLUB_STATS is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
-@@ -1068,7 +1169,88 @@
- # CONFIG_KEYS is not set
- # CONFIG_SECURITY is not set
- # CONFIG_SECURITY_FILE_CAPABILITIES is not set
--# CONFIG_CRYPTO is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_AEAD=m
-+CONFIG_CRYPTO_BLKCIPHER=m
-+CONFIG_CRYPTO_HASH=m
-+CONFIG_CRYPTO_MANAGER=m
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_AUTHENC=m
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=m
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+# CONFIG_CRYPTO_ECB is not set
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+CONFIG_CRYPTO_HMAC=m
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=m
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+CONFIG_CRYPTO_SHA1=m
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+CONFIG_CRYPTO_DES=m
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+CONFIG_CRYPTO_DEFLATE=y
-+CONFIG_CRYPTO_LZO=y
-+# CONFIG_CRYPTO_HW is not set
-
- #
- # Library routines
-@@ -1077,15 +1259,16 @@
- # CONFIG_GENERIC_FIND_FIRST_BIT is not set
- # CONFIG_GENERIC_FIND_NEXT_BIT is not set
- CONFIG_CRC_CCITT=m
--# CONFIG_CRC16 is not set
-+CONFIG_CRC16=y
- CONFIG_CRC_T10DIF=m
- CONFIG_CRC_ITU_T=m
- CONFIG_CRC32=y
- CONFIG_CRC7=m
- # CONFIG_LIBCRC32C is not set
--CONFIG_AUDIT_GENERIC=y
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
-+CONFIG_LZO_COMPRESS=y
-+CONFIG_LZO_DECOMPRESS=y
- CONFIG_GENERIC_ALLOCATOR=y
- CONFIG_PLIST=y
- CONFIG_HAS_IOMEM=y
-diff -urN linux-2.6.28.2-0rig//arch/avr32/configs/atstk1004_defconfig linux-2.6.28.2/arch/avr32/configs/atstk1004_defconfig
---- linux-2.6.28.2-0rig//arch/avr32/configs/atstk1004_defconfig 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/configs/atstk1004_defconfig 2009-01-29 08:52:49.000000000 +0100
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.27-rc1
--# Tue Aug 5 15:38:56 2008
-+# Linux kernel version: 2.6.27.4
-+# Wed Nov 12 10:35:14 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -30,8 +30,10 @@
- CONFIG_INIT_ENV_ARG_LIMIT=32
- CONFIG_LOCALVERSION=""
- # CONFIG_LOCALVERSION_AUTO is not set
--# CONFIG_SYSVIPC is not set
--# CONFIG_POSIX_MQUEUE is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
- # CONFIG_AUDIT is not set
-@@ -41,14 +43,16 @@
- # CONFIG_GROUP_SCHED is not set
- CONFIG_SYSFS_DEPRECATED=y
- CONFIG_SYSFS_DEPRECATED_V2=y
--# CONFIG_RELAY is not set
-+CONFIG_RELAY=y
- # CONFIG_NAMESPACES is not set
--# CONFIG_BLK_DEV_INITRD is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
- CONFIG_SYSCTL=y
- CONFIG_EMBEDDED=y
- # CONFIG_SYSCTL_SYSCALL is not set
- CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
- # CONFIG_KALLSYMS_EXTRA_PASS is not set
- CONFIG_HOTPLUG=y
- CONFIG_PRINTK=y
-@@ -56,19 +60,23 @@
- CONFIG_ELF_CORE=y
- # CONFIG_COMPAT_BRK is not set
- # CONFIG_BASE_FULL is not set
--# CONFIG_FUTEX is not set
--# CONFIG_EPOLL is not set
--# CONFIG_SIGNALFD is not set
--# CONFIG_TIMERFD is not set
--# CONFIG_EVENTFD is not set
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLUB_DEBUG=y
- # CONFIG_SLAB is not set
--# CONFIG_SLUB is not set
--CONFIG_SLOB=y
--# CONFIG_PROFILING is not set
-+CONFIG_SLUB=y
-+# CONFIG_SLOB is not set
-+CONFIG_PROFILING=y
- # CONFIG_MARKERS is not set
-+CONFIG_OPROFILE=m
- CONFIG_HAVE_OPROFILE=y
-+CONFIG_KPROBES=y
- # CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
- # CONFIG_HAVE_IOREMAP_PROT is not set
- CONFIG_HAVE_KPROBES=y
-@@ -77,36 +85,68 @@
- # CONFIG_HAVE_DMA_ATTRS is not set
- # CONFIG_USE_GENERIC_SMP_HELPERS is not set
- CONFIG_HAVE_CLK=y
--# CONFIG_PROC_PAGE_MONITOR is not set
-+CONFIG_PROC_PAGE_MONITOR=y
- # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=1
--# CONFIG_MODULES is not set
--# CONFIG_BLOCK is not set
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_KMOD=y
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_BLK_DEV_INTEGRITY is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+# CONFIG_IOSCHED_AS is not set
-+# CONFIG_IOSCHED_DEADLINE is not set
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
- CONFIG_CLASSIC_RCU=y
-
- #
- # System Type and features
- #
--# CONFIG_TICK_ONESHOT is not set
--# CONFIG_NO_HZ is not set
--# CONFIG_HIGH_RES_TIMERS is not set
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
- CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
- CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PORTMUX_PIO=y
- CONFIG_PLATFORM_AT32AP=y
- CONFIG_CPU_AT32AP700X=y
- CONFIG_CPU_AT32AP7002=y
- CONFIG_BOARD_ATSTK1000=y
- # CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_FAVR_32 is not set
-+# CONFIG_BOARD_MIMC200 is not set
- # CONFIG_BOARD_ATSTK1002 is not set
- # CONFIG_BOARD_ATSTK1003 is not set
- CONFIG_BOARD_ATSTK1004=y
-+# CONFIG_BOARD_ATSTK1005 is not set
- # CONFIG_BOARD_ATSTK1006 is not set
- # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
- # CONFIG_BOARD_ATSTK100X_SPI1 is not set
--# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-+CONFIG_BOARD_ATSTK1000_J2_LED=y
-+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-+CONFIG_BOARD_ATSTK1000_J2_RGB=y
- CONFIG_BOARD_ATSTK1000_EXTDAC=y
- CONFIG_LOADER_U_BOOT=y
-
-@@ -144,25 +184,43 @@
- CONFIG_NR_QUICK=2
- CONFIG_VIRT_TO_BUS=y
- # CONFIG_OWNERSHIP_TRACE is not set
--# CONFIG_NMI_DEBUGGING is not set
-+CONFIG_NMI_DEBUGGING=y
- # CONFIG_HZ_100 is not set
- CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
- # CONFIG_HZ_1000 is not set
- CONFIG_HZ=250
--# CONFIG_SCHED_HRTICK is not set
-+CONFIG_SCHED_HRTICK=y
- CONFIG_CMDLINE=""
-
- #
- # Power management options
- #
--# CONFIG_PM is not set
-+CONFIG_PM=y
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
- CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
- #
- # CPU Frequency scaling
- #
--# CONFIG_CPU_FREQ is not set
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+# CONFIG_CPU_FREQ_STAT is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-
- #
- # Bus options
-@@ -183,40 +241,71 @@
- CONFIG_PACKET=y
- CONFIG_PACKET_MMAP=y
- CONFIG_UNIX=y
--# CONFIG_NET_KEY is not set
-+CONFIG_XFRM=y
-+CONFIG_XFRM_USER=m
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_XFRM_IPCOMP=m
-+CONFIG_NET_KEY=m
-+# CONFIG_NET_KEY_MIGRATE is not set
- CONFIG_INET=y
- # CONFIG_IP_MULTICAST is not set
- # CONFIG_IP_ADVANCED_ROUTER is not set
- CONFIG_IP_FIB_HASH=y
--# CONFIG_IP_PNP is not set
--# CONFIG_NET_IPIP is not set
--# CONFIG_NET_IPGRE is not set
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+CONFIG_NET_IPIP=m
-+CONFIG_NET_IPGRE=m
- # CONFIG_ARPD is not set
- # CONFIG_SYN_COOKIES is not set
--# CONFIG_INET_AH is not set
--# CONFIG_INET_ESP is not set
-+CONFIG_INET_AH=m
-+CONFIG_INET_ESP=m
- # CONFIG_INET_IPCOMP is not set
- # CONFIG_INET_XFRM_TUNNEL is not set
--# CONFIG_INET_TUNNEL is not set
--# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
--# CONFIG_INET_XFRM_MODE_TUNNEL is not set
--# CONFIG_INET_XFRM_MODE_BEET is not set
-+CONFIG_INET_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET_XFRM_MODE_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_BEET=m
- # CONFIG_INET_LRO is not set
--# CONFIG_INET_DIAG is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
- # CONFIG_TCP_CONG_ADVANCED is not set
- CONFIG_TCP_CONG_CUBIC=y
- CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_TCP_MD5SIG is not set
--# CONFIG_IPV6 is not set
-+CONFIG_IPV6=m
-+# CONFIG_IPV6_PRIVACY is not set
-+# CONFIG_IPV6_ROUTER_PREF is not set
-+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-+CONFIG_INET6_AH=m
-+CONFIG_INET6_ESP=m
-+CONFIG_INET6_IPCOMP=m
-+# CONFIG_IPV6_MIP6 is not set
-+CONFIG_INET6_XFRM_TUNNEL=m
-+CONFIG_INET6_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET6_XFRM_MODE_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_BEET=m
-+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-+CONFIG_IPV6_SIT=m
-+CONFIG_IPV6_NDISC_NODETYPE=y
-+CONFIG_IPV6_TUNNEL=m
-+# CONFIG_IPV6_MULTIPLE_TABLES is not set
-+# CONFIG_IPV6_MROUTE is not set
- # CONFIG_NETWORK_SECMARK is not set
- # CONFIG_NETFILTER is not set
- # CONFIG_IP_DCCP is not set
- # CONFIG_IP_SCTP is not set
- # CONFIG_TIPC is not set
- # CONFIG_ATM is not set
--# CONFIG_BRIDGE is not set
-+CONFIG_STP=m
-+CONFIG_BRIDGE=m
- # CONFIG_VLAN_8021Q is not set
- # CONFIG_DECNET is not set
-+CONFIG_LLC=m
- # CONFIG_LLC2 is not set
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
-@@ -230,6 +319,7 @@
- # Network testing
- #
- # CONFIG_NET_PKTGEN is not set
-+# CONFIG_NET_TCPPROBE is not set
- # CONFIG_HAMRADIO is not set
- # CONFIG_CAN is not set
- # CONFIG_IRDA is not set
-@@ -257,6 +347,8 @@
- CONFIG_STANDALONE=y
- # CONFIG_PREVENT_FIRMWARE_BUILD is not set
- # CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
- # CONFIG_SYS_HYPERVISOR is not set
- # CONFIG_CONNECTOR is not set
- CONFIG_MTD=y
-@@ -271,6 +363,14 @@
- # User Modules And Translation Layers
- #
- CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+# CONFIG_MTD_BLOCK is not set
-+# CONFIG_MTD_BLOCK_RO is not set
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
- # CONFIG_MTD_OOPS is not set
-
- #
-@@ -311,11 +411,13 @@
- #
- # Self-contained MTD device drivers
- #
--# CONFIG_MTD_DATAFLASH is not set
--# CONFIG_MTD_M25P80 is not set
-+CONFIG_MTD_DATAFLASH=m
-+CONFIG_MTD_M25P80=m
-+CONFIG_M25PXX_USE_FAST_READ=y
- # CONFIG_MTD_SLRAM is not set
- # CONFIG_MTD_PHRAM is not set
- # CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-
- #
- # Disk-On-Chip Device Drivers
-@@ -329,24 +431,186 @@
- #
- # UBI - Unsorted block images
- #
--# CONFIG_MTD_UBI is not set
-+CONFIG_MTD_UBI=y
-+CONFIG_MTD_UBI_WL_THRESHOLD=4096
-+CONFIG_MTD_UBI_BEB_RESERVE=1
-+# CONFIG_MTD_UBI_GLUEBI is not set
-+
-+#
-+# UBI debugging options
-+#
-+# CONFIG_MTD_UBI_DEBUG is not set
- # CONFIG_PARPORT is not set
--# CONFIG_MISC_DEVICES is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=m
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+CONFIG_BLK_DEV_NBD=m
-+CONFIG_BLK_DEV_RAM=m
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=4096
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+CONFIG_ATMEL_PWM=m
-+CONFIG_ATMEL_TCLIB=y
-+CONFIG_ATMEL_TCB_CLKSRC=y
-+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_ATMEL_SSC=m
-+# CONFIG_ENCLOSURE_SERVICES is not set
- # CONFIG_HAVE_IDE is not set
-
- #
- # SCSI device support
- #
--# CONFIG_SCSI_DMA is not set
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=m
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
- # CONFIG_SCSI_NETLINK is not set
--# CONFIG_NETDEVICES is not set
-+# CONFIG_SCSI_PROC_FS is not set
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=m
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+CONFIG_BLK_DEV_SR=m
-+# CONFIG_BLK_DEV_SR_VENDOR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_MULTI_LUN is not set
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+# CONFIG_SCSI_LOWLEVEL is not set
-+# CONFIG_SCSI_DH is not set
-+CONFIG_ATA=m
-+# CONFIG_ATA_NONSTANDARD is not set
-+# CONFIG_SATA_PMP is not set
-+CONFIG_ATA_SFF=y
-+# CONFIG_SATA_MV is not set
-+CONFIG_PATA_AT32=m
-+# CONFIG_PATA_PLATFORM is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+# CONFIG_MII is not set
-+CONFIG_MACB=y
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+# CONFIG_WAN is not set
-+CONFIG_PPP=m
-+# CONFIG_PPP_MULTILINK is not set
-+# CONFIG_PPP_FILTER is not set
-+CONFIG_PPP_ASYNC=m
-+# CONFIG_PPP_SYNC_TTY is not set
-+CONFIG_PPP_DEFLATE=m
-+CONFIG_PPP_BSDCOMP=m
-+# CONFIG_PPP_MPPE is not set
-+# CONFIG_PPPOE is not set
-+# CONFIG_PPPOL2TP is not set
-+# CONFIG_SLIP is not set
-+CONFIG_SLHC=m
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
- # CONFIG_ISDN is not set
- # CONFIG_PHONE is not set
-
- #
- # Input device support
- #
--# CONFIG_INPUT is not set
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+CONFIG_INPUT_POLLDEV=m
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=m
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=m
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+CONFIG_KEYBOARD_GPIO=m
-+CONFIG_INPUT_MOUSE=y
-+# CONFIG_MOUSE_PS2 is not set
-+# CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_APPLETOUCH is not set
-+# CONFIG_MOUSE_BCM5974 is not set
-+# CONFIG_MOUSE_VSXXXAA is not set
-+CONFIG_MOUSE_GPIO=m
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-
- #
- # Hardware I/O ports
-@@ -357,8 +621,12 @@
- #
- # Character devices
- #
--# CONFIG_VT is not set
--# CONFIG_DEVKMEM is not set
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
- # CONFIG_SERIAL_NONSTANDARD is not set
-
- #
-@@ -371,7 +639,7 @@
- #
- CONFIG_SERIAL_ATMEL=y
- CONFIG_SERIAL_ATMEL_CONSOLE=y
--# CONFIG_SERIAL_ATMEL_PDC is not set
-+CONFIG_SERIAL_ATMEL_PDC=y
- # CONFIG_SERIAL_ATMEL_TTYAT is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
-@@ -380,14 +648,62 @@
- # CONFIG_IPMI_HANDLER is not set
- # CONFIG_HW_RANDOM is not set
- # CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
- # CONFIG_TCG_TPM is not set
--# CONFIG_I2C is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
-+CONFIG_I2C_HELPER_AUTO=y
-+CONFIG_I2C_ALGOBIT=m
-+
-+#
-+# I2C Hardware Bus support
-+#
-+
-+#
-+# I2C system bus drivers (mostly embedded / system-on-chip)
-+#
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_SIMTEC is not set
-+
-+#
-+# External I2C/SMBus adapter drivers
-+#
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+
-+#
-+# Other I2C/SMBus bus drivers
-+#
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_AT24 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
- CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
- CONFIG_SPI_MASTER=y
-
- #
- # SPI Master Controller Drivers
- #
-+CONFIG_SPI_ATMEL_HAVE_PDC=y
- CONFIG_SPI_ATMEL=y
- # CONFIG_SPI_BITBANG is not set
-
-@@ -395,15 +711,19 @@
- # SPI Protocol Masters
- #
- # CONFIG_SPI_AT25 is not set
--# CONFIG_SPI_SPIDEV is not set
-+CONFIG_SPI_SPIDEV=m
- # CONFIG_SPI_TLE62X0 is not set
- CONFIG_ARCH_REQUIRE_GPIOLIB=y
- CONFIG_GPIOLIB=y
--# CONFIG_GPIO_SYSFS is not set
-+# CONFIG_DEBUG_GPIO is not set
-+CONFIG_GPIO_SYSFS=y
-
- #
- # I2C GPIO expanders:
- #
-+# CONFIG_GPIO_MAX732X is not set
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-
- #
- # PCI GPIO expanders:
-@@ -426,7 +746,7 @@
- # Watchdog Device Drivers
- #
- # CONFIG_SOFT_WATCHDOG is not set
--CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32_WDT=y
-
- #
- # Sonics Silicon Backplane
-@@ -440,6 +760,7 @@
- # CONFIG_MFD_CORE is not set
- # CONFIG_MFD_SM501 is not set
- # CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-
- #
- # Multimedia devices
-@@ -485,6 +806,7 @@
- #
- # CONFIG_FB_S1D13XXX is not set
- CONFIG_FB_ATMEL=y
-+# CONFIG_FB_ATMEL_MPOP is not set
- # CONFIG_FB_VIRTUAL is not set
- CONFIG_BACKLIGHT_LCD_SUPPORT=y
- CONFIG_LCD_CLASS_DEVICE=y
-@@ -498,20 +820,51 @@
- # Display device support
- #
- # CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE is not set
- # CONFIG_LOGO is not set
--# CONFIG_SOUND is not set
-+CONFIG_SOUND=m
-+CONFIG_SND=m
-+CONFIG_SND_TIMER=m
-+CONFIG_SND_PCM=m
-+# CONFIG_SND_SEQUENCER is not set
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+# CONFIG_SND_VERBOSE_PROCFS is not set
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+# CONFIG_SND_DRIVERS is not set
-+CONFIG_SND_SPI=y
-+CONFIG_SND_AT73C213=m
-+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-+# CONFIG_SND_SOC is not set
-+# CONFIG_SOUND_PRIME is not set
-+# CONFIG_HID_SUPPORT is not set
- CONFIG_USB_SUPPORT=y
--# CONFIG_USB_ARCH_HAS_HCD is not set
--# CONFIG_USB_ARCH_HAS_OHCI is not set
--# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+# CONFIG_USB is not set
- # CONFIG_USB_OTG_WHITELIST is not set
- # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+# CONFIG_USB_MUSB_HDRC is not set
-+# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
- #
- CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG is not set
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
-+# CONFIG_USB_GADGET_DEBUG_FS is not set
- CONFIG_USB_GADGET_SELECTED=y
- # CONFIG_USB_GADGET_AMD5536UDC is not set
- CONFIG_USB_GADGET_ATMEL_USBA=y
-@@ -528,18 +881,54 @@
- # CONFIG_USB_GADGET_AT91 is not set
- # CONFIG_USB_GADGET_DUMMY_HCD is not set
- CONFIG_USB_GADGET_DUALSPEED=y
--# CONFIG_USB_ZERO is not set
--CONFIG_USB_ETH=y
--# CONFIG_USB_ETH_RNDIS is not set
--# CONFIG_USB_GADGETFS is not set
--# CONFIG_USB_FILE_STORAGE is not set
--# CONFIG_USB_G_SERIAL is not set
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
- # CONFIG_USB_MIDI_GADGET is not set
- # CONFIG_USB_G_PRINTER is not set
--# CONFIG_USB_CDC_COMPOSITE is not set
--# CONFIG_MMC is not set
-+CONFIG_USB_CDC_COMPOSITE=m
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-+# CONFIG_MMC_TEST is not set
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+# CONFIG_MMC_SDHCI is not set
-+CONFIG_MMC_ATMELMCI=y
-+# CONFIG_MMC_ATMELMCI_DMA is not set
-+CONFIG_MMC_SPI=m
- # CONFIG_MEMSTICK is not set
--# CONFIG_NEW_LEDS is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=m
-+
-+#
-+# LED drivers
-+#
-+CONFIG_LEDS_ATMEL_PWM=m
-+# CONFIG_LEDS_PCA9532 is not set
-+CONFIG_LEDS_GPIO=m
-+# CONFIG_LEDS_PCA955X is not set
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=m
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
- # CONFIG_ACCESSIBILITY is not set
- CONFIG_RTC_LIB=y
- CONFIG_RTC_CLASS=y
-@@ -551,12 +940,28 @@
- # RTC interfaces
- #
- CONFIG_RTC_INTF_SYSFS=y
--# CONFIG_RTC_INTF_PROC is not set
-+CONFIG_RTC_INTF_PROC=y
- CONFIG_RTC_INTF_DEV=y
- # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
- # CONFIG_RTC_DRV_TEST is not set
-
- #
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-+# CONFIG_RTC_DRV_FM3130 is not set
-+
-+#
- # SPI RTC drivers
- #
- # CONFIG_RTC_DRV_M41T94 is not set
-@@ -580,18 +985,62 @@
- # on-CPU RTC drivers
- #
- CONFIG_RTC_DRV_AT32AP700X=y
--# CONFIG_DMADEVICES is not set
-+# CONFIG_RTC_DRV_AVR32_AST is not set
-+CONFIG_DMADEVICES=y
-+
-+#
-+# DMA Devices
-+#
-+# CONFIG_ATMEL_PDCA is not set
-+CONFIG_DW_DMAC=y
-+CONFIG_DMA_ENGINE=y
-+
-+#
-+# DMA Clients
-+#
-+# CONFIG_NET_DMA is not set
-+CONFIG_DMATEST=m
- # CONFIG_UIO is not set
-
- #
- # File systems
- #
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_OCFS2_FS is not set
- # CONFIG_DNOTIFY is not set
--# CONFIG_INOTIFY is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
- # CONFIG_QUOTA is not set
- # CONFIG_AUTOFS_FS is not set
- # CONFIG_AUTOFS4_FS is not set
--# CONFIG_FUSE_FS is not set
-+CONFIG_FUSE_FS=m
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=m
-+CONFIG_MSDOS_FS=m
-+CONFIG_VFAT_FS=m
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-
- #
- # Pseudo filesystems
-@@ -603,14 +1052,22 @@
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--# CONFIG_CONFIGFS_FS is not set
-+CONFIG_CONFIGFS_FS=y
-
- #
- # Miscellaneous filesystems
- #
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
- CONFIG_JFFS2_FS=y
- CONFIG_JFFS2_FS_DEBUG=0
--# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
- # CONFIG_JFFS2_SUMMARY is not set
- # CONFIG_JFFS2_FS_XATTR is not set
- # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-@@ -618,8 +1075,85 @@
- # CONFIG_JFFS2_LZO is not set
- CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
--# CONFIG_NETWORK_FILESYSTEMS is not set
--# CONFIG_NLS is not set
-+CONFIG_UBIFS_FS=y
-+CONFIG_UBIFS_FS_XATTR=y
-+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-+CONFIG_UBIFS_FS_LZO=y
-+CONFIG_UBIFS_FS_ZLIB=y
-+# CONFIG_UBIFS_FS_DEBUG is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+CONFIG_MINIX_FS=m
-+# CONFIG_OMFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+CONFIG_ROOT_NFS=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+CONFIG_NLS=m
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=m
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=m
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=m
- # CONFIG_DLM is not set
-
- #
-@@ -631,11 +1165,43 @@
- CONFIG_FRAME_WARN=1024
- CONFIG_MAGIC_SYSRQ=y
- # CONFIG_UNUSED_SYMBOLS is not set
--# CONFIG_DEBUG_FS is not set
-+CONFIG_DEBUG_FS=y
- # CONFIG_HEADERS_CHECK is not set
--# CONFIG_DEBUG_KERNEL is not set
--# CONFIG_DEBUG_BUGVERBOSE is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_OBJECTS is not set
-+# CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_SLUB_STATS is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_WRITECOUNT is not set
- # CONFIG_DEBUG_MEMORY_INIT is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_KPROBES_SANITY_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
-+# CONFIG_LKDTM is not set
-+# CONFIG_FAULT_INJECTION is not set
- # CONFIG_SAMPLES is not set
-
- #
-@@ -644,7 +1210,88 @@
- # CONFIG_KEYS is not set
- # CONFIG_SECURITY is not set
- # CONFIG_SECURITY_FILE_CAPABILITIES is not set
--# CONFIG_CRYPTO is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_AEAD=m
-+CONFIG_CRYPTO_BLKCIPHER=m
-+CONFIG_CRYPTO_HASH=m
-+CONFIG_CRYPTO_MANAGER=m
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_AUTHENC=m
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=m
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+# CONFIG_CRYPTO_ECB is not set
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+CONFIG_CRYPTO_HMAC=m
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=m
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+CONFIG_CRYPTO_SHA1=m
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+CONFIG_CRYPTO_DES=m
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+CONFIG_CRYPTO_DEFLATE=y
-+CONFIG_CRYPTO_LZO=y
-+# CONFIG_CRYPTO_HW is not set
-
- #
- # Library routines
-@@ -652,16 +1299,19 @@
- CONFIG_BITREVERSE=y
- # CONFIG_GENERIC_FIND_FIRST_BIT is not set
- # CONFIG_GENERIC_FIND_NEXT_BIT is not set
--# CONFIG_CRC_CCITT is not set
--# CONFIG_CRC16 is not set
--# CONFIG_CRC_T10DIF is not set
--# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC_CCITT=m
-+CONFIG_CRC16=y
-+CONFIG_CRC_T10DIF=m
-+CONFIG_CRC_ITU_T=m
- CONFIG_CRC32=y
--# CONFIG_CRC7 is not set
-+CONFIG_CRC7=m
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
-+CONFIG_LZO_COMPRESS=y
-+CONFIG_LZO_DECOMPRESS=y
- CONFIG_GENERIC_ALLOCATOR=y
-+CONFIG_PLIST=y
- CONFIG_HAS_IOMEM=y
- CONFIG_HAS_IOPORT=y
- CONFIG_HAS_DMA=y
-diff -urN linux-2.6.28.2-0rig//arch/avr32/configs/atstk1005_defconfig linux-2.6.28.2/arch/avr32/configs/atstk1005_defconfig
---- linux-2.6.28.2-0rig//arch/avr32/configs/atstk1005_defconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/configs/atstk1005_defconfig 2009-01-29 08:52:49.000000000 +0100
-@@ -0,0 +1,1505 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.27.4
-+# Fri Nov 7 10:22:27 2008
-+#
-+CONFIG_AVR32=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_GENERIC_BUG=y
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+# CONFIG_GROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+CONFIG_RELAY=y
-+# CONFIG_NAMESPACES is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+# CONFIG_SYSCTL_SYSCALL is not set
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+# CONFIG_COMPAT_BRK is not set
-+# CONFIG_BASE_FULL is not set
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLUB_DEBUG=y
-+# CONFIG_SLAB is not set
-+CONFIG_SLUB=y
-+# CONFIG_SLOB is not set
-+CONFIG_PROFILING=y
-+# CONFIG_MARKERS is not set
-+CONFIG_OPROFILE=m
-+CONFIG_HAVE_OPROFILE=y
-+CONFIG_KPROBES=y
-+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-+# CONFIG_HAVE_IOREMAP_PROT is not set
-+CONFIG_HAVE_KPROBES=y
-+# CONFIG_HAVE_KRETPROBES is not set
-+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-+# CONFIG_HAVE_DMA_ATTRS is not set
-+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-+CONFIG_HAVE_CLK=y
-+CONFIG_PROC_PAGE_MONITOR=y
-+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=1
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_KMOD=y
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_BLK_DEV_INTEGRITY is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+# CONFIG_IOSCHED_AS is not set
-+# CONFIG_IOSCHED_DEADLINE is not set
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
-+
-+#
-+# System Type and features
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+CONFIG_SUBARCH_AVR32B=y
-+CONFIG_MMU=y
-+CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PORTMUX_GPIO_V2=y
-+CONFIG_TIMER_AST=y
-+CONFIG_PLATFORM_AT32AP=y
-+CONFIG_CPU_AT32AP720X=y
-+CONFIG_CPU_AT32AP7200=y
-+CONFIG_BOARD_ATSTK1000=y
-+# CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_FAVR_32 is not set
-+# CONFIG_BOARD_MIMC200 is not set
-+# CONFIG_BOARD_ATSTK1002 is not set
-+# CONFIG_BOARD_ATSTK1003 is not set
-+# CONFIG_BOARD_ATSTK1004 is not set
-+CONFIG_BOARD_ATSTK1005=y
-+# CONFIG_BOARD_ATSTK1006 is not set
-+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-+CONFIG_BOARD_ATSTK1000_J2_LED=y
-+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-+CONFIG_BOARD_ATSTK1000_J2_RGB=y
-+CONFIG_BOARD_ATSTK1000_EXTDAC=y
-+CONFIG_LOADER_U_BOOT=y
-+
-+#
-+# Atmel AVR32 AP options
-+#
-+CONFIG_LOAD_ADDRESS=0x10000000
-+CONFIG_ENTRY_ADDRESS=0x90000000
-+CONFIG_PHYS_OFFSET=0x10000000
-+CONFIG_PREEMPT_NONE=y
-+# CONFIG_PREEMPT_VOLUNTARY is not set
-+# CONFIG_PREEMPT is not set
-+CONFIG_QUICKLIST=y
-+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-+CONFIG_ARCH_FLATMEM_ENABLE=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=0
-+CONFIG_NR_QUICK=2
-+CONFIG_VIRT_TO_BUS=y
-+# CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_NMI_DEBUGGING=y
-+# CONFIG_HZ_100 is not set
-+CONFIG_HZ_250=y
-+# CONFIG_HZ_300 is not set
-+# CONFIG_HZ_1000 is not set
-+CONFIG_HZ=250
-+CONFIG_SCHED_HRTICK=y
-+CONFIG_CMDLINE=""
-+
-+#
-+# Power management options
-+#
-+CONFIG_PM=y
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+
-+#
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+# CONFIG_CPU_FREQ_STAT is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-+
-+#
-+# Bus options
-+#
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Executable file formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_MISC is not set
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+CONFIG_XFRM_USER=m
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_XFRM_IPCOMP=m
-+CONFIG_NET_KEY=m
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+CONFIG_NET_IPIP=m
-+CONFIG_NET_IPGRE=m
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+CONFIG_INET_AH=m
-+CONFIG_INET_ESP=m
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+CONFIG_INET_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET_XFRM_MODE_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_BEET=m
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+CONFIG_IPV6=m
-+# CONFIG_IPV6_PRIVACY is not set
-+# CONFIG_IPV6_ROUTER_PREF is not set
-+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-+CONFIG_INET6_AH=m
-+CONFIG_INET6_ESP=m
-+CONFIG_INET6_IPCOMP=m
-+# CONFIG_IPV6_MIP6 is not set
-+CONFIG_INET6_XFRM_TUNNEL=m
-+CONFIG_INET6_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET6_XFRM_MODE_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_BEET=m
-+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-+CONFIG_IPV6_SIT=m
-+CONFIG_IPV6_NDISC_NODETYPE=y
-+CONFIG_IPV6_TUNNEL=m
-+# CONFIG_IPV6_MULTIPLE_TABLES is not set
-+# CONFIG_IPV6_MROUTE is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+CONFIG_STP=m
-+CONFIG_BRIDGE=m
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+CONFIG_LLC=m
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_NET_TCPPROBE is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+CONFIG_STANDALONE=y
-+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+# CONFIG_MTD_BLOCK is not set
-+# CONFIG_MTD_BLOCK_RO is not set
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_CFI_INTELEXT is not set
-+CONFIG_MTD_CFI_AMDSTD=y
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x8000000
-+CONFIG_MTD_PHYSMAP_LEN=0x0
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+CONFIG_MTD_DATAFLASH=m
-+CONFIG_MTD_M25P80=m
-+CONFIG_M25PXX_USE_FAST_READ=y
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_NAND=y
-+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+CONFIG_MTD_NAND_ECC_SMC=y
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+CONFIG_MTD_NAND_ATMEL=y
-+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ALAUDA is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+CONFIG_MTD_UBI=y
-+CONFIG_MTD_UBI_WL_THRESHOLD=4096
-+CONFIG_MTD_UBI_BEB_RESERVE=1
-+# CONFIG_MTD_UBI_GLUEBI is not set
-+
-+#
-+# UBI debugging options
-+#
-+# CONFIG_MTD_UBI_DEBUG is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=m
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+CONFIG_BLK_DEV_NBD=m
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=m
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=4096
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+CONFIG_ATMEL_PWM=m
-+# CONFIG_ATMEL_TCLIB is not set
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_ATMEL_SSC=m
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_HAVE_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=m
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+# CONFIG_SCSI_PROC_FS is not set
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=m
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+CONFIG_BLK_DEV_SR=m
-+# CONFIG_BLK_DEV_SR_VENDOR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_MULTI_LUN is not set
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+# CONFIG_SCSI_LOWLEVEL is not set
-+# CONFIG_SCSI_DH is not set
-+CONFIG_ATA=m
-+# CONFIG_ATA_NONSTANDARD is not set
-+# CONFIG_SATA_PMP is not set
-+CONFIG_ATA_SFF=y
-+# CONFIG_SATA_MV is not set
-+CONFIG_PATA_AT32=m
-+# CONFIG_PATA_PLATFORM is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=m
-+CONFIG_MACB=y
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+
-+#
-+# USB Network Adapters
-+#
-+CONFIG_USB_CATC=m
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+CONFIG_USB_USBNET=m
-+# CONFIG_USB_NET_AX8817X is not set
-+CONFIG_USB_NET_CDCETHER=m
-+# CONFIG_USB_NET_DM9601 is not set
-+# CONFIG_USB_NET_GL620A is not set
-+# CONFIG_USB_NET_NET1080 is not set
-+# CONFIG_USB_NET_PLUSB is not set
-+# CONFIG_USB_NET_MCS7830 is not set
-+# CONFIG_USB_NET_RNDIS_HOST is not set
-+CONFIG_USB_NET_CDC_SUBSET=m
-+# CONFIG_USB_ALI_M5632 is not set
-+# CONFIG_USB_AN2720 is not set
-+CONFIG_USB_BELKIN=y
-+CONFIG_USB_ARMLINUX=y
-+# CONFIG_USB_EPSON2888 is not set
-+# CONFIG_USB_KC2190 is not set
-+# CONFIG_USB_NET_ZAURUS is not set
-+# CONFIG_WAN is not set
-+CONFIG_PPP=m
-+# CONFIG_PPP_MULTILINK is not set
-+# CONFIG_PPP_FILTER is not set
-+CONFIG_PPP_ASYNC=m
-+# CONFIG_PPP_SYNC_TTY is not set
-+CONFIG_PPP_DEFLATE=m
-+CONFIG_PPP_BSDCOMP=m
-+# CONFIG_PPP_MPPE is not set
-+# CONFIG_PPPOE is not set
-+# CONFIG_PPPOL2TP is not set
-+# CONFIG_SLIP is not set
-+CONFIG_SLHC=m
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+CONFIG_INPUT_POLLDEV=m
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=m
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=m
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+CONFIG_KEYBOARD_GPIO=m
-+CONFIG_INPUT_MOUSE=y
-+# CONFIG_MOUSE_PS2 is not set
-+# CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_APPLETOUCH is not set
-+# CONFIG_MOUSE_BCM5974 is not set
-+# CONFIG_MOUSE_VSXXXAA is not set
-+CONFIG_MOUSE_GPIO=m
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+CONFIG_SERIAL_ATMEL_PDC=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
-+CONFIG_I2C_HELPER_AUTO=y
-+CONFIG_I2C_ALGOBIT=m
-+
-+#
-+# I2C Hardware Bus support
-+#
-+
-+#
-+# I2C system bus drivers (mostly embedded / system-on-chip)
-+#
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_SIMTEC is not set
-+
-+#
-+# External I2C/SMBus adapter drivers
-+#
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+CONFIG_I2C_TINY_USB=m
-+
-+#
-+# Other I2C/SMBus bus drivers
-+#
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_AT24 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+CONFIG_SPI_SPIDEV=m
-+# CONFIG_SPI_TLE62X0 is not set
-+CONFIG_ARCH_REQUIRE_GPIOLIB=y
-+CONFIG_GPIOLIB=y
-+# CONFIG_DEBUG_GPIO is not set
-+CONFIG_GPIO_SYSFS=y
-+
-+#
-+# I2C GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX732X is not set
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-+
-+#
-+# PCI GPIO expanders:
-+#
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX7301 is not set
-+# CONFIG_GPIO_MCP23S08 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+# CONFIG_THERMAL_HWMON is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32_WDT=y
-+
-+#
-+# USB-based Watchdog Cards
-+#
-+# CONFIG_USBPCWATCHDOG is not set
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_CORE is not set
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-+
-+#
-+# Multimedia devices
-+#
-+
-+#
-+# Multimedia core support
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_VIDEO_MEDIA is not set
-+
-+#
-+# Multimedia drivers
-+#
-+# CONFIG_DAB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_FOREIGN_ENDIAN is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_ATMEL=y
-+# CONFIG_FB_ATMEL_MPOP is not set
-+# CONFIG_FB_VIRTUAL is not set
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_LCD_CLASS_DEVICE=y
-+CONFIG_LCD_LTV350QV=y
-+# CONFIG_LCD_ILI9320 is not set
-+# CONFIG_LCD_VGG2432A4 is not set
-+# CONFIG_LCD_PLATFORM is not set
-+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE is not set
-+# CONFIG_LOGO is not set
-+CONFIG_SOUND=m
-+CONFIG_SND=m
-+CONFIG_SND_TIMER=m
-+CONFIG_SND_PCM=m
-+CONFIG_SND_HWDEP=m
-+CONFIG_SND_RAWMIDI=m
-+# CONFIG_SND_SEQUENCER is not set
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+# CONFIG_SND_VERBOSE_PROCFS is not set
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+# CONFIG_SND_DRIVERS is not set
-+CONFIG_SND_SPI=y
-+CONFIG_SND_AT73C213=m
-+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-+CONFIG_SND_USB=y
-+CONFIG_SND_USB_AUDIO=m
-+# CONFIG_SND_USB_CAIAQ is not set
-+# CONFIG_SND_SOC is not set
-+# CONFIG_SOUND_PRIME is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+# CONFIG_HIDRAW is not set
-+
-+#
-+# USB Input Devices
-+#
-+CONFIG_USB_HID=y
-+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-+# CONFIG_HID_FF is not set
-+# CONFIG_USB_HIDDEV is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_DEVICE_CLASS is not set
-+CONFIG_USB_DYNAMIC_MINORS=y
-+CONFIG_USB_SUSPEND=y
-+# CONFIG_USB_OTG is not set
-+# CONFIG_USB_OTG_WHITELIST is not set
-+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+CONFIG_USB_MON=y
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_C67X00_HCD is not set
-+CONFIG_USB_EHCI_HCD=y
-+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
-+# CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_ISP1760_HCD is not set
-+CONFIG_USB_OHCI_HCD=y
-+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-+# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+# CONFIG_USB_MUSB_HDRC is not set
-+# CONFIG_USB_GADGET_MUSB_HDRC is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+CONFIG_USB_ACM=m
-+CONFIG_USB_PRINTER=m
-+CONFIG_USB_WDM=m
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=m
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_ISD200 is not set
-+# CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_ONETOUCH is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+
-+#
-+# USB port drivers
-+#
-+CONFIG_USB_SERIAL=m
-+# CONFIG_USB_EZUSB is not set
-+CONFIG_USB_SERIAL_GENERIC=y
-+# CONFIG_USB_SERIAL_AIRCABLE is not set
-+# CONFIG_USB_SERIAL_ARK3116 is not set
-+# CONFIG_USB_SERIAL_BELKIN is not set
-+# CONFIG_USB_SERIAL_CH341 is not set
-+# CONFIG_USB_SERIAL_WHITEHEAT is not set
-+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-+# CONFIG_USB_SERIAL_CP2101 is not set
-+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-+# CONFIG_USB_SERIAL_EMPEG is not set
-+# CONFIG_USB_SERIAL_FTDI_SIO is not set
-+# CONFIG_USB_SERIAL_FUNSOFT is not set
-+# CONFIG_USB_SERIAL_VISOR is not set
-+# CONFIG_USB_SERIAL_IPAQ is not set
-+# CONFIG_USB_SERIAL_IR is not set
-+# CONFIG_USB_SERIAL_EDGEPORT is not set
-+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-+# CONFIG_USB_SERIAL_GARMIN is not set
-+# CONFIG_USB_SERIAL_IPW is not set
-+# CONFIG_USB_SERIAL_IUU is not set
-+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-+# CONFIG_USB_SERIAL_KEYSPAN is not set
-+# CONFIG_USB_SERIAL_KLSI is not set
-+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-+# CONFIG_USB_SERIAL_MCT_U232 is not set
-+# CONFIG_USB_SERIAL_MOS7720 is not set
-+# CONFIG_USB_SERIAL_MOS7840 is not set
-+# CONFIG_USB_SERIAL_MOTOROLA is not set
-+# CONFIG_USB_SERIAL_NAVMAN is not set
-+CONFIG_USB_SERIAL_PL2303=m
-+# CONFIG_USB_SERIAL_OTI6858 is not set
-+# CONFIG_USB_SERIAL_SPCP8X5 is not set
-+# CONFIG_USB_SERIAL_HP4X is not set
-+# CONFIG_USB_SERIAL_SAFE is not set
-+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-+# CONFIG_USB_SERIAL_TI is not set
-+# CONFIG_USB_SERIAL_CYBERJACK is not set
-+# CONFIG_USB_SERIAL_XIRCOM is not set
-+# CONFIG_USB_SERIAL_OPTION is not set
-+# CONFIG_USB_SERIAL_OMNINET is not set
-+# CONFIG_USB_SERIAL_DEBUG is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_SISUSBVGA is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+CONFIG_USB_TEST=m
-+# CONFIG_USB_ISIGHTFW is not set
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG is not set
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+# CONFIG_USB_GADGET_DEBUG_FS is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA25X is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_PXA27X is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_USB_G_PRINTER is not set
-+# CONFIG_USB_CDC_COMPOSITE is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-+CONFIG_MMC_TEST=m
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+# CONFIG_MMC_SDHCI is not set
-+CONFIG_MMC_ATMELMCI=y
-+# CONFIG_MMC_ATMELMCI_DMA is not set
-+CONFIG_MMC_SPI=m
-+# CONFIG_MEMSTICK is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=m
-+
-+#
-+# LED drivers
-+#
-+CONFIG_LEDS_ATMEL_PWM=m
-+# CONFIG_LEDS_PCA9532 is not set
-+CONFIG_LEDS_GPIO=m
-+# CONFIG_LEDS_PCA955X is not set
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=m
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-+# CONFIG_ACCESSIBILITY is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-+# CONFIG_RTC_DRV_FM3130 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_M41T94 is not set
-+# CONFIG_RTC_DRV_DS1305 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1511 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+# CONFIG_RTC_DRV_AT32AP700X is not set
-+CONFIG_RTC_DRV_AVR32_AST=y
-+CONFIG_DMADEVICES=y
-+
-+#
-+# DMA Devices
-+#
-+CONFIG_ATMEL_PDCA=y
-+CONFIG_DW_DMAC=y
-+CONFIG_DMA_ENGINE=y
-+
-+#
-+# DMA Clients
-+#
-+# CONFIG_NET_DMA is not set
-+CONFIG_DMATEST=m
-+# CONFIG_UIO is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_DNOTIFY is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+CONFIG_FUSE_FS=m
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=m
-+CONFIG_MSDOS_FS=m
-+CONFIG_VFAT_FS=m
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_KCORE=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_CONFIGFS_FS=y
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+CONFIG_UBIFS_FS=y
-+CONFIG_UBIFS_FS_XATTR=y
-+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-+CONFIG_UBIFS_FS_LZO=y
-+CONFIG_UBIFS_FS_ZLIB=y
-+# CONFIG_UBIFS_FS_DEBUG is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+CONFIG_MINIX_FS=m
-+# CONFIG_OMFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+CONFIG_ROOT_NFS=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+CONFIG_NLS=m
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=m
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=m
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=m
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_FRAME_WARN=1024
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+CONFIG_DEBUG_FS=y
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_OBJECTS is not set
-+# CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_SLUB_STATS is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_WRITECOUNT is not set
-+# CONFIG_DEBUG_MEMORY_INIT is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_KPROBES_SANITY_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
-+# CONFIG_LKDTM is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_AEAD=m
-+CONFIG_CRYPTO_BLKCIPHER=m
-+CONFIG_CRYPTO_HASH=m
-+CONFIG_CRYPTO_MANAGER=m
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_AUTHENC=m
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=m
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+# CONFIG_CRYPTO_ECB is not set
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+CONFIG_CRYPTO_HMAC=m
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=m
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+CONFIG_CRYPTO_SHA1=m
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+CONFIG_CRYPTO_DES=m
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+CONFIG_CRYPTO_DEFLATE=y
-+CONFIG_CRYPTO_LZO=y
-+# CONFIG_CRYPTO_HW is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-+CONFIG_CRC_CCITT=m
-+CONFIG_CRC16=y
-+# CONFIG_CRC_T10DIF is not set
-+CONFIG_CRC_ITU_T=m
-+CONFIG_CRC32=y
-+CONFIG_CRC7=m
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_LZO_COMPRESS=y
-+CONFIG_LZO_DECOMPRESS=y
-+CONFIG_GENERIC_ALLOCATOR=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff -urN linux-2.6.28.2-0rig//arch/avr32/configs/atstk1006_defconfig linux-2.6.28.2/arch/avr32/configs/atstk1006_defconfig
---- linux-2.6.28.2-0rig//arch/avr32/configs/atstk1006_defconfig 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/configs/atstk1006_defconfig 2009-01-29 09:11:15.000000000 +0100
-@@ -124,6 +124,7 @@
- CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PORTMUX_PIO=y
- CONFIG_PLATFORM_AT32AP=y
- CONFIG_CPU_AT32AP700X=y
- CONFIG_CPU_AT32AP7000=y
-@@ -137,9 +138,9 @@
- CONFIG_BOARD_ATSTK1006=y
- # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
- # CONFIG_BOARD_ATSTK100X_SPI1 is not set
--# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-+CONFIG_BOARD_ATSTK1000_J2_LED=y
- # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
--# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-+CONFIG_BOARD_ATSTK1000_J2_RGB=y
- CONFIG_BOARD_ATSTK1000_EXTDAC=y
- CONFIG_LOADER_U_BOOT=y
-
-@@ -355,7 +356,8 @@
- CONFIG_MTD_CHAR=y
- CONFIG_HAVE_MTD_OTP=y
- CONFIG_MTD_BLKDEVS=y
--CONFIG_MTD_BLOCK=y
-+# CONFIG_MTD_BLOCK is not set
-+# CONFIG_MTD_BLOCK_RO is not set
- # CONFIG_FTL is not set
- # CONFIG_NFTL is not set
- # CONFIG_INFTL is not set
-@@ -419,7 +421,7 @@
- # CONFIG_MTD_DOC2001PLUS is not set
- CONFIG_MTD_NAND=y
- # CONFIG_MTD_NAND_VERIFY_WRITE is not set
--# CONFIG_MTD_NAND_ECC_SMC is not set
-+CONFIG_MTD_NAND_ECC_SMC=y
- # CONFIG_MTD_NAND_MUSEUM_IDS is not set
- CONFIG_MTD_NAND_IDS=y
- # CONFIG_MTD_NAND_DISKONCHIP is not set
-@@ -519,7 +521,7 @@
- # CONFIG_BONDING is not set
- # CONFIG_MACVLAN is not set
- # CONFIG_EQUALIZER is not set
--CONFIG_TUN=m
-+# CONFIG_TUN is not set
- # CONFIG_VETH is not set
- CONFIG_PHYLIB=y
-
-@@ -581,7 +583,7 @@
- #
- # Input device support
- #
--CONFIG_INPUT=m
-+CONFIG_INPUT=y
- # CONFIG_INPUT_FF_MEMLESS is not set
- CONFIG_INPUT_POLLDEV=m
-
-@@ -610,6 +612,8 @@
- CONFIG_INPUT_MOUSE=y
- # CONFIG_MOUSE_PS2 is not set
- # CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_APPLETOUCH is not set
-+# CONFIG_MOUSE_BCM5974 is not set
- # CONFIG_MOUSE_VSXXXAA is not set
- CONFIG_MOUSE_GPIO=m
- # CONFIG_INPUT_JOYSTICK is not set
-@@ -626,8 +630,12 @@
- #
- # Character devices
- #
--# CONFIG_VT is not set
--# CONFIG_DEVKMEM is not set
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
- # CONFIG_SERIAL_NONSTANDARD is not set
-
- #
-@@ -704,6 +712,7 @@
- #
- # SPI Master Controller Drivers
- #
-+CONFIG_SPI_ATMEL_HAVE_PDC=y
- CONFIG_SPI_ATMEL=y
- # CONFIG_SPI_BITBANG is not set
-
-@@ -752,6 +761,7 @@
- # CONFIG_SOFT_WATCHDOG is not set
- CONFIG_AT32AP700X_WDT=y
- CONFIG_SSB_POSSIBLE=y
-+CONFIG_AT32_WDT=y
-
- #
- # Sonics Silicon Backplane
-@@ -814,6 +824,7 @@
- #
- # CONFIG_FB_S1D13XXX is not set
- CONFIG_FB_ATMEL=y
-+# CONFIG_FB_ATMEL_MPOP is not set
- # CONFIG_FB_VIRTUAL is not set
- # CONFIG_FB_METRONOME is not set
- # CONFIG_FB_MB862XX is not set
-@@ -830,6 +841,12 @@
- # Display device support
- #
- # CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE is not set
- # CONFIG_LOGO is not set
- CONFIG_SOUND=m
- CONFIG_SOUND_OSS_CORE=y
-@@ -846,11 +863,7 @@
- # CONFIG_SND_VERBOSE_PROCFS is not set
- # CONFIG_SND_VERBOSE_PRINTK is not set
- # CONFIG_SND_DEBUG is not set
--CONFIG_SND_DRIVERS=y
--# CONFIG_SND_DUMMY is not set
--# CONFIG_SND_MTPAV is not set
--# CONFIG_SND_SERIAL_U16550 is not set
--# CONFIG_SND_MPU401 is not set
-+# CONFIG_SND_DRIVERS is not set
- CONFIG_SND_SPI=y
- CONFIG_SND_AT73C213=m
- CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-@@ -858,9 +871,9 @@
- # CONFIG_SOUND_PRIME is not set
- # CONFIG_HID_SUPPORT is not set
- CONFIG_USB_SUPPORT=y
--# CONFIG_USB_ARCH_HAS_HCD is not set
--# CONFIG_USB_ARCH_HAS_OHCI is not set
--# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
- # CONFIG_USB_OTG_WHITELIST is not set
- # CONFIG_USB_OTG_BLACKLIST_HUB is not set
- # CONFIG_USB_MUSB_HDRC is not set
-@@ -900,7 +913,7 @@
- CONFIG_USB_G_SERIAL=m
- # CONFIG_USB_MIDI_GADGET is not set
- # CONFIG_USB_G_PRINTER is not set
--# CONFIG_USB_CDC_COMPOSITE is not set
-+CONFIG_USB_CDC_COMPOSITE=m
- CONFIG_MMC=y
- # CONFIG_MMC_DEBUG is not set
- # CONFIG_MMC_UNSAFE_RESUME is not set
-@@ -1002,11 +1015,13 @@
- # on-CPU RTC drivers
- #
- CONFIG_RTC_DRV_AT32AP700X=y
-+# CONFIG_RTC_DRV_AVR32_AST is not set
- CONFIG_DMADEVICES=y
-
- #
- # DMA Devices
- #
-+# CONFIG_ATMEL_PDCA is not set
- CONFIG_DW_DMAC=y
- CONFIG_DMA_ENGINE=y
-
-@@ -1022,17 +1037,17 @@
- #
- # File systems
- #
--CONFIG_EXT2_FS=m
-+CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
--CONFIG_EXT3_FS=m
-+CONFIG_EXT3_FS=y
- # CONFIG_EXT3_FS_XATTR is not set
--CONFIG_EXT4_FS=m
--CONFIG_EXT4DEV_COMPAT=y
-+# CONFIG_EXT4_FS is not set
-+# CONFIG_EXT4DEV_COMPAT=y
- # CONFIG_EXT4_FS_XATTR is not set
--CONFIG_JBD=m
-+CONFIG_JBD=y
- # CONFIG_JBD_DEBUG is not set
--CONFIG_JBD2=m
-+# CONFIG_JBD2 is not set
- # CONFIG_JBD2_DEBUG is not set
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
-@@ -1075,7 +1090,7 @@
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--# CONFIG_CONFIGFS_FS is not set
-+CONFIG_CONFIGFS_FS=y
-
- #
- # Miscellaneous filesystems
-diff -urN linux-2.6.28.2-0rig//arch/avr32/include/asm/ast_regs.h linux-2.6.28.2/arch/avr32/include/asm/ast_regs.h
---- linux-2.6.28.2-0rig//arch/avr32/include/asm/ast_regs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/include/asm/ast_regs.h 2009-01-29 08:52:49.000000000 +0100
-@@ -0,0 +1,88 @@
-+/*
-+ * Register definitions for the Asynchronous Timer (AST)
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __AST_REGS_H__
-+#define __AST_REGS_H__
-+
-+/* Control Register */
-+#define AST_CR 0x0000
-+# define AST_CR_EN_BIT 0 /* Enable */
-+# define AST_CR_PCLR_BIT 1 /* Prescaler Clear */
-+# define AST_CR_CA0_BIT 8 /* Clear on Alarm */
-+# define AST_CR_CA1_BIT 9
-+# define AST_CR_PSEL_START 16 /* Prescale Select */
-+# define AST_CR_PSEL_SIZE 4
-+
-+/* Counter Value */
-+#define AST_CV 0x0004
-+
-+/* Status, Status Clear, Interrupt Enable/Disable/Mask, Wake Enable */
-+#define AST_SR 0x0008
-+#define AST_SCR 0x000c
-+#define AST_IER 0x0010
-+#define AST_IDR 0x0014
-+#define AST_IMR 0x0018
-+#define AST_WER 0x001c
-+# define AST_OVF_BIT 0 /* Overflow */
-+# define AST_ALARM0_BIT 8 /* Alarm event */
-+# define AST_ALARM1_BIT 9
-+# define AST_PER0_BIT 16 /* Periodic event */
-+# define AST_PER1_BIT 17
-+# define AST_BUSY_BIT 24 /* AST busy */
-+# define AST_READY_BIT 25 /* BUSY 1 -> 0 event */
-+# define AST_CLK_BUSY_BIT 28 /* CLOCK busy */
-+# define AST_CLK_READY_BIT 29 /* CKL_BUSY 1 -> 0 event */
-+
-+/* Alarm registers */
-+#define AST_AR0 0x0020
-+#define AST_AR1 0x0024
-+
-+/* Periodic Interval registers */
-+#define AST_PIR0 0x0030
-+#define AST_PIR1 0x0034
-+# define AST_PIRx_INSEL_START 0 /* Interval select */
-+# define AST_PIRx_INSEL_SIZE 4
-+
-+/* Clock Select register */
-+#define AST_CLOCK 0x0040
-+# define AST_CLOCK_CEN_BIT 0 /* Clock Enable */
-+# define AST_CLOCK_CSSEL_START 8 /* Clock Source */
-+# define AST_CLOCK_CSSEL_SIZE 2
-+# define AST_CLOCK_SLOW 0 /* RC oscillator */
-+# define AST_CLOCK_OSC32 1 /* 32 kHz oscillator */
-+# define AST_CLOCK_PB 2 /* Peripheral Bus clock */
-+# define AST_CLOCK_GC 3 /* Generic clock */
-+
-+/* Version register */
-+#define AST_VERSION 0x00fc
-+
-+/* Bit manipulation macros */
-+#define AST_BIT(name) \
-+ (1 << AST_##name##_BIT)
-+#define AST_BF(name,value) \
-+ (((value) & ((1 << AST_##name##_SIZE) - 1)) \
-+ << AST_##name##_START)
-+#define AST_BFEXT(name,value) \
-+ (((value) >> AST_##name##_START) \
-+ & ((1 << AST_##name##_SIZE) - 1))
-+#define AST_BFINS(name,value,old) \
-+ (((old) & ~(((1 << AST_##name##_SIZE) - 1) \
-+ << AST_##name##_START)) \
-+ | AST_BF(name,value))
-+
-+/* Register access macros */
-+#define ast_readl(base, reg) \
-+ __raw_readl(base + AST_##reg)
-+#define ast_writel(base, reg, value) \
-+ __raw_writel(value, base + AST_##reg)
-+
-+struct platform_device;
-+void ast_time_init(struct platform_device *pdev, unsigned int clksel);
-+
-+#endif /* __AST_REGS_H__ */
-diff -urN linux-2.6.28.2-0rig//arch/avr32/Kconfig linux-2.6.28.2/arch/avr32/Kconfig
---- linux-2.6.28.2-0rig//arch/avr32/Kconfig 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/Kconfig 2009-01-29 08:52:44.000000000 +0100
-@@ -85,6 +85,18 @@
- config PERFORMANCE_COUNTERS
- bool
-
-+# The old "PIO" portmux/GPIO module used on AT32AP700x
-+config PORTMUX_PIO
-+ bool
-+
-+# The new "GPIO" portmux/GPIO module, version 2
-+config PORTMUX_GPIO_V2
-+ bool
-+
-+# Asynchronous Timer clocksource/clockevent driver
-+config TIMER_AST
-+ bool
-+
- config PLATFORM_AT32AP
- bool
- select SUBARCH_AVR32B
-@@ -101,6 +113,7 @@
- config CPU_AT32AP700X
- bool
- select PLATFORM_AT32AP
-+ select PORTMUX_PIO
- config CPU_AT32AP7000
- bool
- select CPU_AT32AP700X
-@@ -111,6 +124,16 @@
- bool
- select CPU_AT32AP700X
-
-+# AP7200 derivatives
-+config CPU_AT32AP720X
-+ bool
-+ select PLATFORM_AT32AP
-+ select TIMER_AST
-+ select PORTMUX_GPIO_V2
-+config CPU_AT32AP7200
-+ bool
-+ select CPU_AT32AP720X
-+
- choice
- prompt "AVR32 board type"
- default BOARD_ATSTK1000
-@@ -148,14 +171,17 @@
- config LOAD_ADDRESS
- hex
- default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
-+ default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP720X=y
-
- config ENTRY_ADDRESS
- hex
- default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
-+ default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP720X=y
-
- config PHYS_OFFSET
- hex
- default 0x10000000 if CPU_AT32AP700X=y
-+ default 0x10000000 if CPU_AT32AP720X=y
-
- source "kernel/Kconfig.preempt"
-
-diff -urN linux-2.6.28.2-0rig//arch/avr32/kernel/cpu.c linux-2.6.28.2/arch/avr32/kernel/cpu.c
---- linux-2.6.28.2-0rig//arch/avr32/kernel/cpu.c 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/kernel/cpu.c 2009-01-29 08:52:49.000000000 +0100
-@@ -208,6 +208,7 @@
-
- static const struct chip_id_map chip_names[] = {
- { .mid = 0x1f, .pn = 0x1e82, .name = "AT32AP700x" },
-+ { .mid = 0x1f, .pn = 0x1e83, .name = "AT32AP720x" },
- };
- #define NR_CHIP_NAMES ARRAY_SIZE(chip_names)
-
-diff -urN linux-2.6.28.2-0rig//arch/avr32/kernel/entry-avr32b.S linux-2.6.28.2/arch/avr32/kernel/entry-avr32b.S
---- linux-2.6.28.2-0rig//arch/avr32/kernel/entry-avr32b.S 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/kernel/entry-avr32b.S 2009-01-29 08:52:49.000000000 +0100
-@@ -112,7 +112,9 @@
-
- /* Second level lookup */
- ld.w r2, r3[r1 << 2]
-+#ifdef CONFIG_CPU_AT32AP700X
- mfsr r0, SYSREG_TLBARLO
-+#endif
- bld r2, _PAGE_BIT_PRESENT
- brcc page_not_present
-
-@@ -124,6 +126,8 @@
- andl r2, _PAGE_FLAGS_HARDWARE_MASK & 0xffff
- mtsr SYSREG_TLBELO, r2
-
-+ /* Later CPUs do this algorithm in hardware */
-+#ifdef CONFIG_CPU_AT32AP700X
- /* Figure out which entry we want to replace */
- mfsr r1, SYSREG_MMUCR
- clz r2, r0
-@@ -134,6 +138,7 @@
-
- 1: bfins r1, r2, SYSREG_DRP_OFFSET, SYSREG_DRP_SIZE
- mtsr SYSREG_MMUCR, r1
-+#endif /* CONFIG_CPU_AT32AP700X */
- tlbw
-
- tlbmiss_restore
-@@ -751,8 +756,10 @@
-
- lddsp r4, sp[REG_SR]
- bfextu r4, r4, SYSREG_M0_OFFSET, 3
-+#ifdef CONFIG_CPU_AT32AP700X
- cp.w r4, MODE_SUPERVISOR >> SYSREG_M0_OFFSET
- breq 2f
-+#endif
- cp.w r4, MODE_USER >> SYSREG_M0_OFFSET
- #ifdef CONFIG_PREEMPT
- brne 3f
-@@ -786,6 +793,7 @@
- rete
- #endif
-
-+#ifdef CONFIG_CPU_AT32AP700X
- 2: get_thread_info r0
- ld.w r1, r0[TI_flags]
- bld r1, TIF_CPU_GOING_TO_SLEEP
-@@ -796,6 +804,7 @@
- #endif
- sub r1, pc, . - cpu_idle_skip_sleep
- stdsp sp[REG_PC], r1
-+#endif
- #ifdef CONFIG_PREEMPT
- 3: get_thread_info r0
- ld.w r2, r0[TI_preempt_count]
-diff -urN linux-2.6.28.2-0rig//arch/avr32/kernel/time.c linux-2.6.28.2/arch/avr32/kernel/time.c
---- linux-2.6.28.2-0rig//arch/avr32/kernel/time.c 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/kernel/time.c 2009-01-29 08:52:49.000000000 +0100
-@@ -15,6 +15,8 @@
-
- #include <asm/sysreg.h>
-
-+#include <mach/cpu.h>
-+#include <mach/init.h>
- #include <mach/pm.h>
-
-
-@@ -116,6 +118,9 @@
- unsigned long counter_hz;
- int ret;
-
-+ /* Make sure we don't get any interrupts until we ask for it. */
-+ sysreg_write(COMPARE, 0);
-+
- xtime.tv_sec = mktime(2007, 1, 1, 0, 0, 0);
- xtime.tv_nsec = 0;
-
-@@ -130,12 +135,16 @@
- if (ret)
- pr_debug("timer: could not register clocksource: %d\n", ret);
-
-+ if (!cpu_has_working_compare()) {
-+ platform_time_init();
-+ return;
-+ }
-+
- /* setup COMPARE clockevent */
- comparator.mult = div_sc(counter_hz, NSEC_PER_SEC, comparator.shift);
- comparator.max_delta_ns = clockevent_delta2ns((u32)~0, &comparator);
- comparator.min_delta_ns = clockevent_delta2ns(50, &comparator) + 1;
-
-- sysreg_write(COMPARE, 0);
- timer_irqaction.dev_id = &comparator;
-
- ret = setup_irq(0, &timer_irqaction);
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/at32ap700x.c linux-2.6.28.2/arch/avr32/mach-at32ap/at32ap700x.c
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/at32ap700x.c 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/at32ap700x.c 2009-01-29 08:52:49.000000000 +0100
-@@ -23,6 +23,7 @@
- #include <mach/at32ap700x.h>
- #include <mach/board.h>
- #include <mach/hmatrix.h>
-+#include <mach/pm.h>
- #include <mach/portmux.h>
- #include <mach/sram.h>
-
-@@ -30,7 +31,7 @@
-
- #include "clock.h"
- #include "pio.h"
--#include "pm.h"
-+#include "pm-v1.h"
-
-
- #define PBMEM(base) \
-@@ -996,6 +997,7 @@
- void __init at32_map_usart(unsigned int hw_id, unsigned int line)
- {
- struct platform_device *pdev;
-+ u32 pin_mask;
-
- switch (hw_id) {
- case 0:
-@@ -1155,6 +1157,7 @@
- static struct resource atmel_spi0_resource[] = {
- PBMEM(0xffe00000),
- IRQ(3),
-+ { 0 }, /* SRAM buffer, if available */
- };
- DEFINE_DEV(atmel_spi, 0);
- DEV_CLK(spi_clk, atmel_spi0, pba, 0);
-@@ -1162,6 +1165,7 @@
- static struct resource atmel_spi1_resource[] = {
- PBMEM(0xffe00400),
- IRQ(4),
-+ { 0 }, /* SRAM buffer, if available */
- };
- DEFINE_DEV(atmel_spi, 1);
- DEV_CLK(spi_clk, atmel_spi1, pba, 1);
-@@ -1191,6 +1195,8 @@
- struct platform_device *__init
- at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
- {
-+ unsigned long sram_buf;
-+
- /*
- * Manage the chipselects as GPIOs, normally using the same pins
- * the SPI controller expects; but boards can use other pins.
-@@ -1231,6 +1237,13 @@
- return NULL;
- }
-
-+ sram_buf = sram_alloc(4096);
-+ if (sram_buf) {
-+ pdev->resource[2].start = sram_buf;
-+ pdev->resource[2].end = sram_buf + 4096 - 1;
-+ pdev->resource[2].flags = IORESOURCE_MEM;
-+ }
-+
- spi_register_board_info(b, n);
- platform_device_register(pdev);
- return pdev;
-@@ -1738,6 +1751,7 @@
- struct usba_ep_data ep[7];
- } usba_data;
- struct platform_device *pdev;
-+ u32 pin_mask;
-
- if (id != 0)
- return NULL;
-@@ -1940,6 +1954,7 @@
- at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
- {
- struct platform_device *pdev;
-+ u32 pin_mask;
-
- if (id != 0 || !data)
- return NULL;
-@@ -2272,6 +2287,11 @@
- at32_init_pio(&pio4_device);
- }
-
-+unsigned long at32_get_reset_cause(void)
-+{
-+ return pm_readl(RCAUSE);
-+}
-+
- struct gen_pool *sram_pool;
-
- static int __init sram_init(void)
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/at32ap720x.c linux-2.6.28.2/arch/avr32/mach-at32ap/at32ap720x.c
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/at32ap720x.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/at32ap720x.c 2009-01-29 08:52:49.000000000 +0100
-@@ -0,0 +1,2303 @@
-+/*
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/atmel_pdca.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dw_dmac.h>
-+#include <linux/errno.h>
-+#include <linux/fb.h>
-+#include <linux/gpio.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm.h>
-+#include <linux/spinlock.h>
-+#include <linux/spi/atmel_spi.h>
-+#include <linux/spi/spi.h>
-+#include <video/atmel_lcdc.h>
-+#include <video/atmel_mpop.h>
-+
-+#include <asm/ast_regs.h>
-+#include <asm/atmel-mci.h>
-+
-+#include <mach/at32ap720x.h>
-+#include <mach/board.h>
-+#include <mach/hmatrix.h>
-+#include <mach/init.h>
-+#include <mach/pm.h>
-+#include <mach/portmux.h>
-+#include <mach/sram.h>
-+
-+#include "clock.h"
-+#include "gpio-v2.h"
-+#include "pm-v3.h"
-+#include "sdc.h"
-+
-+#define PBMEM(base) \
-+ { \
-+ .start = base, \
-+ .end = base + 0x3ff, \
-+ .flags = IORESOURCE_MEM, \
-+ }
-+#define IRQ(num) \
-+ { \
-+ .start = num, \
-+ .end = num, \
-+ .flags = IORESOURCE_IRQ, \
-+ }
-+
-+#define select_peripheral(port, pin_mask, periph, flags) \
-+ at32_select_periph(GPIO_##port##_BASE, pin_mask, \
-+ GPIO_##periph, flags)
-+
-+#define DEV_CLK(_name, devname, bus, _index) \
-+static struct clk devname##_##_name = { \
-+ .name = #_name, \
-+ .dev = &devname##_device.dev, \
-+ .parent = &bus##_clk, \
-+ .mode = bus##_clk_mode, \
-+ .get_rate = bus##_clk_get_rate, \
-+ .index = _index, \
-+}
-+
-+static DEFINE_SPINLOCK(pm_lock);
-+
-+static unsigned long rcosc_get_rate(struct clk *clk)
-+{
-+ return 32768;
-+}
-+
-+static unsigned long osc_get_rate(struct clk *clk)
-+{
-+ return at32_board_osc_rates[clk->index];
-+}
-+
-+static void osc32_mode(struct clk *clk, int enabled)
-+{
-+ /* We never disable the 32 kHz oscillator */
-+ if (!enabled)
-+ return;
-+
-+ /* If it's already running, we're done. */
-+ if (pm_readl(POSCSR) & PM_BIT(POSCSR_OSC32RDY))
-+ return;
-+
-+ /* Enable it, unless someone did it for us already */
-+ if (!(sdc_readl(OSCCTRL32) & SDC_BIT(OSCCTRL32_OSC32EN))) {
-+ u32 value;
-+
-+ value = SDC_BF(OSCCTRL32_STARTUP, 5)
-+ | SDC_BF(OSCCTRL32_MODE, 0xd)
-+ | SDC_BIT(OSCCTRL32_OSC32EN);
-+
-+ sdc_writel(OSCCTRL32, value | SDC_BF(OSCCTRL32_KEY, 0x55));
-+ sdc_writel(OSCCTRL32, value | SDC_BF(OSCCTRL32_KEY, 0xaa));
-+ }
-+
-+ pr_info("Waiting for 32 kHz crystal oscillator to start...\n");
-+
-+ while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_OSC32RDY)))
-+ cpu_relax();
-+}
-+
-+static void oscn_mode(struct clk *clk, int enabled)
-+{
-+ unsigned int i = clk->index;
-+ u32 mcctrl;
-+
-+ BUG_ON(i > 2);
-+
-+ /* Let's keep oscillators running for now... */
-+ if (!enabled)
-+ goto out;
-+
-+ /* If it's already running, we're done */
-+ if (pm_readl(POSCSR) & (PM_BIT(POSCSR_OSC0RDY) << i))
-+ goto out;
-+
-+ /* Enable it, unless someone did it for us already */
-+ mcctrl = pm_readl(MCCTRL);
-+ if (!(mcctrl & (PM_BIT(MCCTRL_OSC0EN) << i))) {
-+ /* TODO: Make OSC startup parameters configurable */
-+ pm_writel(OSCCTRL[i], PM_BF(OSCCTRLx_STARTUP, 5)
-+ | PM_BF(OSCCTRLx_MODE, 0xa));
-+ pm_writel(MCCTRL, mcctrl | (PM_BIT(MCCTRL_OSC0EN) << i));
-+ }
-+
-+ pr_debug("clk %s: waiting for clock to become ready...\n", clk->name);
-+ pr_debug("clk %s: MCCTRL=%08x OSCCTRL%u=%08x\n", clk->name,
-+ pm_readl(MCCTRL), i, pm_readl(OSCCTRL[i]));
-+
-+ while (!(pm_readl(POSCSR) & (PM_BIT(POSCSR_OSC0RDY) << i)))
-+ cpu_relax();
-+
-+out:
-+ pr_debug("clk %s: running\n", clk->name);
-+}
-+
-+static struct clk rcosc = {
-+ .name = "rcosc",
-+ .get_rate = rcosc_get_rate,
-+ .users = 1,
-+};
-+static struct clk osc0 = {
-+ .name = "osc0",
-+ .get_rate = osc_get_rate,
-+ .mode = oscn_mode,
-+ .users = 1,
-+ .index = 0,
-+};
-+static struct clk osc1 = {
-+ .name = "osc1",
-+ .get_rate = osc_get_rate,
-+ .mode = oscn_mode,
-+ .index = 1,
-+};
-+static struct clk osc2 = {
-+ .name = "osc2",
-+ .get_rate = osc_get_rate,
-+ .mode = oscn_mode,
-+ .index = 2,
-+};
-+static struct clk osc32 = {
-+ .name = "osc32k",
-+ .get_rate = osc_get_rate,
-+ .mode = osc32_mode,
-+ .index = 3,
-+};
-+
-+static void pll_mode(struct clk *clk, int enabled)
-+{
-+ unsigned long timeout;
-+ unsigned int index = clk->index;
-+ u32 status;
-+ u32 ctrl;
-+
-+ ctrl = pm_readl(PLL[index]);
-+
-+ if (enabled) {
-+ if (PM_BFEXT(PLLx_PLLMUL, ctrl) <= 1) {
-+ pr_debug("clk %s: failed to enable, rate not set\n",
-+ clk->name);
-+ return;
-+ }
-+
-+ ctrl |= PM_BIT(PLLx_PLLEN);
-+ pm_writel(PLL[index], ctrl);
-+
-+ pr_debug("clk %s: waiting for lock...\n", clk->name);
-+ for (timeout = 10000; timeout; timeout--) {
-+ status = pm_readl(POSCSR);
-+ if (status & (PM_BIT(POSCSR_LOCK0) << index))
-+ break;
-+ udelay(10);
-+ }
-+
-+ if (!(status & (PM_BIT(POSCSR_LOCK0) << index)))
-+ pr_err("clk %s: timeout waiting for lock\n",
-+ clk->name);
-+ else
-+ pr_debug("clk %s: running\n", clk->name);
-+ } else {
-+ ctrl &= ~PM_BIT(PLLx_PLLEN);
-+ pm_writel(PLL[index], ctrl);
-+ pr_debug("clk %s: stopped\n", clk->name);
-+ }
-+}
-+
-+
-+static unsigned long pll_get_rate(struct clk *clk)
-+{
-+ unsigned long rate;
-+ unsigned int div;
-+ unsigned int mul;
-+ u32 ctrl;
-+
-+ ctrl = pm_readl(PLL[clk->index]);
-+
-+ div = PM_BFEXT(PLLx_PLLDIV, ctrl);
-+ mul = PM_BFEXT(PLLx_PLLMUL, ctrl);
-+
-+ rate = clk->parent->get_rate(clk->parent);
-+ if (div != 0)
-+ rate = (rate + div / 2) / div;
-+ else
-+ rate = rate * 2;
-+ rate *= mul;
-+
-+ if (ctrl & PM_BF(PLLx_PLLOPT, 4))
-+ rate = (rate + 1) / 2;
-+
-+ return rate;
-+}
-+
-+static long pll_set_rate(struct clk *clk, unsigned long rate, int apply)
-+{
-+ unsigned long mul_best_fit = 0;
-+ unsigned long div;
-+ unsigned long div_min;
-+ unsigned long div_max;
-+ unsigned long div_best_fit = 0;
-+ unsigned long base;
-+ unsigned long fvco;
-+ unsigned long actual = 0;
-+ unsigned long rate_error_prev = ~0UL;
-+ u32 ctrl;
-+
-+ /* Rate must be between 25 MHz and 400 Mhz. */
-+ if (rate < 25000000UL || rate > 400000000UL)
-+ return -EINVAL;
-+
-+ base = clk->parent->get_rate(clk->parent);
-+
-+ /* PLL input frequency must be between 10 MHz and 200 MHz. */
-+ div_min = DIV_ROUND_UP(base, 200000000UL);
-+ div_max = base / 10000000UL;
-+
-+ if (div_max < div_min)
-+ return -EINVAL;
-+
-+ for (div = div_min; div <= div_max; div++) {
-+ unsigned long mul;
-+ unsigned long pll_in;
-+ unsigned long rate_error;
-+
-+ pll_in = (base + div / 2) / div;
-+ mul = (rate + pll_in / 2) / pll_in;
-+
-+ if (mul < 1)
-+ continue;
-+
-+ actual = pll_in * mul;
-+ rate_error = abs(actual - rate);
-+
-+ if (rate_error < rate_error_prev) {
-+ mul_best_fit = mul;
-+ div_best_fit = div;
-+ rate_error_prev = rate_error;
-+ }
-+
-+ if (rate_error == 0)
-+ break;
-+ }
-+
-+ if (div_best_fit == 0)
-+ return -EINVAL;
-+
-+ ctrl = 0;
-+ fvco = actual;
-+
-+ /*
-+ * MUL=1 is not allowed. So we must double it and set the
-+ * divide-by-two bit.
-+ */
-+ if (mul_best_fit == 1) {
-+ ctrl |= PM_BF(PLLx_PLLOPT, 4);
-+ mul_best_fit *= 2;
-+ fvco = actual * 2;
-+ }
-+
-+ if (fvco > 200000000)
-+ ctrl |= PM_BF(PLLx_PLLOPT, 3);
-+ else if (fvco > 100000000)
-+ ctrl |= PM_BF(PLLx_PLLOPT, 2);
-+ else if (fvco > 50000000)
-+ ctrl |= PM_BF(PLLx_PLLOPT, 1);
-+
-+ ctrl |= PM_BF(PLLx_PLLCOUNT, 31);
-+ ctrl |= PM_BF(PLLx_PLLMUL, mul_best_fit);
-+ ctrl |= PM_BF(PLLx_PLLDIV, div_best_fit);
-+ ctrl |= PM_BF(PLLx_PLLOSC, clk->parent->index);
-+
-+ if (apply) {
-+ if (actual != rate)
-+ return -EINVAL;
-+ if (clk->users > 0)
-+ return -EBUSY;
-+ pr_debug(KERN_INFO "clk %s: new rate %lu (actual rate %lu)\n",
-+ clk->name, rate, actual);
-+ pm_writel(PLL[clk->index], ctrl);
-+ }
-+
-+ return actual;
-+}
-+
-+static int pll_set_parent(struct clk *clk, struct clk *parent)
-+{
-+ unsigned int index = clk->index;
-+ u32 ctrl;
-+
-+ if (clk->users > 0)
-+ return -EBUSY;
-+
-+ ctrl = pm_readl(PLL[index]);
-+ BUG_ON(ctrl & PM_BIT(PLLx_PLLEN));
-+
-+ ctrl = PM_BFINS(PLLx_PLLOSC, parent->index, ctrl);
-+ pm_writel(PLL[index], ctrl);
-+
-+ clk->parent = parent;
-+
-+ return 0;
-+}
-+
-+static struct clk pll0 = {
-+ .name = "pll0",
-+ .mode = pll_mode,
-+ .get_rate = pll_get_rate,
-+ .set_rate = pll_set_rate,
-+ .set_parent = pll_set_parent,
-+ .users = 1,
-+ .index = 0,
-+};
-+static struct clk pll1 = {
-+ .name = "pll1",
-+ .mode = pll_mode,
-+ .get_rate = pll_get_rate,
-+ .set_rate = pll_set_rate,
-+ .set_parent = pll_set_parent,
-+ .users = 0,
-+ .index = 1,
-+};
-+static struct clk pll2 = {
-+ .name = "pll2",
-+ .mode = pll_mode,
-+ .get_rate = pll_get_rate,
-+ .set_rate = pll_set_rate,
-+ .set_parent = pll_set_parent,
-+ .users = 0,
-+ .index = 2,
-+};
-+
-+/*
-+ * The main clock can be either rcosc, osc0 or pll0. The boot loader
-+ * may have chosen one for us, so we don't really know which one until
-+ * we have a look at the PM registers.
-+ */
-+static struct clk *main_clock;
-+
-+/*
-+ * Synchronous clocks are generated from the main clock. The clocks
-+ * must satisfy the constraint
-+ * fCPU >= fHSB >= fPB
-+ * i.e. each clock must not be faster than its parent.
-+ */
-+static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
-+{
-+ return main_clock->get_rate(main_clock) >> shift;
-+};
-+
-+static void cpu_clk_mode(struct clk *clk, int enabled)
-+{
-+ unsigned long flags;
-+ u32 mask;
-+
-+ spin_lock_irqsave(&pm_lock, flags);
-+
-+ while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_MSKRDY)))
-+ cpu_relax();
-+
-+ mask = pm_readl(CPUMASK);
-+ if (enabled)
-+ mask |= 1 << clk->index;
-+ else
-+ mask &= ~(1 << clk->index);
-+ pm_writel(CPUMASK, mask);
-+ spin_unlock_irqrestore(&pm_lock, flags);
-+}
-+
-+static unsigned long cpu_clk_get_rate(struct clk *clk)
-+{
-+ unsigned long cksel, shift = 0;
-+
-+ cksel = pm_readl(CKSEL);
-+ if (cksel & PM_BIT(CKSEL_CPUDIV))
-+ shift = PM_BFEXT(CKSEL_CPUSEL, cksel) + 1;
-+
-+ return bus_clk_get_rate(clk, shift);
-+}
-+
-+static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
-+{
-+ u32 control;
-+ unsigned long parent_rate, child_div, actual_rate, div;
-+
-+ parent_rate = clk->parent->get_rate(clk->parent);
-+ control = pm_readl(CKSEL);
-+
-+ if (control & PM_BIT(CKSEL_HSBDIV))
-+ child_div = 1 << (PM_BFEXT(CKSEL_HSBSEL, control) + 1);
-+ else
-+ child_div = 1;
-+
-+ if (rate > 3 * (parent_rate / 4) || child_div == 1) {
-+ actual_rate = parent_rate;
-+ control &= ~PM_BIT(CKSEL_CPUDIV);
-+ } else {
-+ unsigned int cpusel;
-+ div = (parent_rate + rate / 2) / rate;
-+ if (div > child_div)
-+ div = child_div;
-+ cpusel = (div > 1) ? (fls(div) - 2) : 0;
-+ control = PM_BIT(CKSEL_CPUDIV)
-+ | PM_BFINS(CKSEL_CPUSEL, cpusel, control);
-+ actual_rate = parent_rate / (1 << (cpusel + 1));
-+ }
-+
-+ pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
-+ clk->name, rate, actual_rate);
-+
-+ if (apply) {
-+ while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_CKRDY)))
-+ cpu_relax();
-+
-+ pm_writel(CKSEL, control);
-+ }
-+
-+ return actual_rate;
-+}
-+
-+static void hsb_clk_mode(struct clk *clk, int enabled)
-+{
-+ unsigned long flags;
-+ u32 mask;
-+
-+ spin_lock_irqsave(&pm_lock, flags);
-+
-+ while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_MSKRDY)))
-+ cpu_relax();
-+
-+ mask = pm_readl(HSBMASK);
-+ if (enabled)
-+ mask |= 1 << clk->index;
-+ else
-+ mask &= ~(1 << clk->index);
-+ pm_writel(HSBMASK, mask);
-+ spin_unlock_irqrestore(&pm_lock, flags);
-+}
-+
-+static unsigned long hsb_clk_get_rate(struct clk *clk)
-+{
-+ unsigned long cksel, shift = 0;
-+
-+ cksel = pm_readl(CKSEL);
-+ if (cksel & PM_BIT(CKSEL_HSBDIV))
-+ shift = PM_BFEXT(CKSEL_HSBSEL, cksel) + 1;
-+
-+ return bus_clk_get_rate(clk, shift);
-+}
-+
-+static void pba_clk_mode(struct clk *clk, int enabled)
-+{
-+ unsigned long flags;
-+ u32 mask;
-+
-+ spin_lock_irqsave(&pm_lock, flags);
-+
-+ while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_MSKRDY)))
-+ cpu_relax();
-+
-+ mask = pm_readl(PBAMASK);
-+ if (enabled)
-+ mask |= 1 << clk->index;
-+ else
-+ mask &= ~(1 << clk->index);
-+ pm_writel(PBAMASK, mask);
-+ spin_unlock_irqrestore(&pm_lock, flags);
-+}
-+
-+static unsigned long pba_clk_get_rate(struct clk *clk)
-+{
-+ unsigned long cksel, shift = 0;
-+
-+ cksel = pm_readl(CKSEL);
-+ if (cksel & PM_BIT(CKSEL_PBADIV))
-+ shift = PM_BFEXT(CKSEL_PBASEL, cksel) + 1;
-+
-+ return bus_clk_get_rate(clk, shift);
-+}
-+
-+static void pbb_clk_mode(struct clk *clk, int enabled)
-+{
-+ unsigned long flags;
-+ u32 mask;
-+
-+ spin_lock_irqsave(&pm_lock, flags);
-+
-+ while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_MSKRDY)))
-+ cpu_relax();
-+
-+ mask = pm_readl(PBBMASK);
-+ if (enabled)
-+ mask |= 1 << clk->index;
-+ else
-+ mask &= ~(1 << clk->index);
-+ pm_writel(PBBMASK, mask);
-+ spin_unlock_irqrestore(&pm_lock, flags);
-+}
-+
-+static unsigned long pbb_clk_get_rate(struct clk *clk)
-+{
-+ unsigned long cksel, shift = 0;
-+
-+ cksel = pm_readl(CKSEL);
-+ if (cksel & PM_BIT(CKSEL_PBBDIV))
-+ shift = PM_BFEXT(CKSEL_PBBSEL, cksel) + 1;
-+
-+ return bus_clk_get_rate(clk, shift);
-+}
-+
-+static struct clk cpu_clk = {
-+ .name = "cpu",
-+ .get_rate = cpu_clk_get_rate,
-+ .set_rate = cpu_clk_set_rate,
-+ .users = 1,
-+};
-+static struct clk hsb_clk = {
-+ .name = "hsb",
-+ .parent = &cpu_clk,
-+ .get_rate = hsb_clk_get_rate,
-+};
-+static struct clk pba_clk = {
-+ .name = "pba",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = pba_clk_get_rate,
-+ .users = 1,
-+ .index = 1,
-+};
-+static struct clk pbb_clk = {
-+ .name = "pbb",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .users = 1,
-+ .index = 2,
-+};
-+static struct clk pbc_clk = {
-+ .name = "pbc",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 3,
-+};
-+
-+/* --------------------------------------------------------------------
-+ * Generic Clocks
-+ * -------------------------------------------------------------------- */
-+
-+/* Mapping from GCCTRL:OSCSEL values to parent clocks */
-+static struct clk *const genclk_parent[] = {
-+ &rcosc,
-+ &osc32,
-+ &osc0,
-+ &osc1,
-+ &osc2,
-+ &pll0,
-+ &pll1,
-+ &pll2,
-+ &cpu_clk,
-+ &hsb_clk,
-+ &pba_clk,
-+ &pbb_clk,
-+};
-+
-+#define NR_GENERIC_CLOCKS 8
-+
-+static void genclk_mode(struct clk *clk, int enabled)
-+{
-+ u32 control;
-+
-+ control = pm_readl(GCCTRL[clk->index]);
-+ if (enabled)
-+ control |= PM_BIT(GCCTRL_CEN);
-+ else
-+ control &= PM_BIT(GCCTRL_CEN);
-+ pm_writel(GCCTRL[clk->index], control);
-+}
-+
-+static unsigned long genclk_get_rate(struct clk *clk)
-+{
-+ u32 control;
-+ unsigned long div = 1;
-+
-+ control = pm_readl(GCCTRL[clk->index]);
-+ if (control & PM_BIT(GCCTRL_DIVEN))
-+ div = 2 * (PM_BFEXT(GCCTRL_DIV, control) + 1);
-+
-+ return clk->parent->get_rate(clk->parent) / div;
-+}
-+
-+static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
-+{
-+ unsigned long parent_rate;
-+ unsigned long actual_rate;
-+ unsigned long div;
-+ u32 control;
-+
-+ parent_rate = clk->parent->get_rate(clk->parent);
-+ control = pm_readl(GCCTRL[clk->index]);
-+
-+ if (rate > 3 * parent_rate / 4) {
-+ actual_rate = parent_rate;
-+ control &= ~PM_BIT(GCCTRL_DIVEN);
-+ } else {
-+ div = (parent_rate + rate) / (2 * rate) - 1;
-+ control = PM_BFINS(GCCTRL_DIV, div, control)
-+ | PM_BIT(GCCTRL_DIVEN);
-+ actual_rate = parent_rate / (2 * (div + 1));
-+ }
-+
-+ pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
-+ clk->name, rate, actual_rate);
-+
-+ if (apply)
-+ pm_writel(GCCTRL[clk->index], control);
-+
-+ return actual_rate;
-+}
-+
-+static int genclk_set_parent(struct clk *clk, struct clk *parent)
-+{
-+ unsigned int i;
-+ u32 control;
-+
-+ pr_debug("clk %s: new parent %s (was %s)\n",
-+ clk->name, parent->name,
-+ clk->parent ? clk->parent->name : "<none>");
-+
-+ control = pm_readl(GCCTRL[clk->index]);
-+
-+ for (i = 0; i < ARRAY_SIZE(genclk_parent); i++) {
-+ if (parent == genclk_parent[i]) {
-+ control = PM_BFINS(GCCTRL_OSCSEL, i, control);
-+ break;
-+ }
-+ }
-+
-+ if (i >= ARRAY_SIZE(genclk_parent))
-+ return -EINVAL;
-+
-+ pm_writel(GCCTRL[clk->index], control);
-+ clk->parent = parent;
-+
-+ return 0;
-+}
-+
-+#define DEFINE_GCLK(_name, i) \
-+ static struct clk _name = { \
-+ .name = #_name, \
-+ .mode = genclk_mode, \
-+ .get_rate = genclk_get_rate, \
-+ .set_rate = genclk_set_rate, \
-+ .set_parent = genclk_set_parent, \
-+ .index = i, \
-+ }
-+
-+DEFINE_GCLK(gclk0, 0);
-+DEFINE_GCLK(gclk1, 1);
-+DEFINE_GCLK(gclk2, 2);
-+DEFINE_GCLK(gclk3, 3);
-+DEFINE_GCLK(gclk4, 4);
-+DEFINE_GCLK(gclk5, 5);
-+
-+static void __init genclk_init_parent(struct clk *clk)
-+{
-+ unsigned int parent;
-+ u32 control;
-+
-+ BUG_ON(clk->index > NR_GENERIC_CLOCKS);
-+
-+ control = pm_readl(GCCTRL[clk->index]);
-+ parent = PM_BFEXT(GCCTRL_OSCSEL, control);
-+ if (parent >= ARRAY_SIZE(genclk_parent)) {
-+ /* Current parent is invalid. Reset to a sane value */
-+ parent = 0;
-+ control = PM_BF(GCCTRL_OSCSEL, parent);
-+ }
-+
-+ clk->parent = genclk_parent[parent];
-+}
-+
-+
-+/* --------------------------------------------------------------------
-+ * System peripherals
-+ * -------------------------------------------------------------------- */
-+static struct dw_dma_platform_data dw_dmac0_data = {
-+ .nr_channels = 4,
-+};
-+static struct pdca_pdata pdca_data = {
-+ .nr_channels = 20,
-+};
-+
-+static struct resource intc_resource[] = {
-+ PBMEM(0xffd00000),
-+};
-+static struct resource pm_resource[] = {
-+ PBMEM(0xffd00400),
-+ IRQ(10),
-+};
-+static struct resource sdc_resource[] = {
-+ PBMEM(0xffd00800),
-+ IRQ(45),
-+};
-+static struct resource ast0_resource[] = {
-+ PBMEM(0xffd00c00),
-+ IRQ(11),
-+};
-+static struct resource ast1_resource[] = {
-+ PBMEM(0xffd01000),
-+ IRQ(12),
-+};
-+static struct resource wdt_resource[] = {
-+ PBMEM(0xffd01400),
-+};
-+static struct resource gpio_resource[] = {
-+ PBMEM(0xffd02000),
-+ {
-+ .start = 16,
-+ .end = 19,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+static struct resource pdca_resource[] = {
-+ {
-+ .start = 0xffe00000,
-+ .end = 0xffe01fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(1),
-+};
-+static struct resource smc_resource[] = {
-+ PBMEM(0xffe04400),
-+};
-+static struct resource dw_dmac0_resource[] = {
-+ {
-+ .start = 0xff100000,
-+ .end = 0xff1003ff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(5),
-+};
-+
-+struct platform_device at32_intc0_device = {
-+ .name = "intc",
-+ .resource = intc_resource,
-+ .num_resources = ARRAY_SIZE(intc_resource),
-+};
-+static struct platform_device pm_device = {
-+ .name = "pm",
-+ .resource = pm_resource,
-+ .num_resources = ARRAY_SIZE(pm_resource),
-+};
-+static struct platform_device sdc_device = {
-+ .name = "sdc",
-+ .resource = sdc_resource,
-+ .num_resources = ARRAY_SIZE(sdc_resource),
-+};
-+static struct platform_device ast0_device = {
-+ .name = "rtc-ast",
-+ .id = 0,
-+ .resource = ast0_resource,
-+ .num_resources = ARRAY_SIZE(ast0_resource),
-+};
-+static struct platform_device ast1_device = {
-+ .name = "timer-ast",
-+ .id = 1,
-+ .resource = ast1_resource,
-+ .num_resources = ARRAY_SIZE(ast1_resource),
-+};
-+static struct platform_device wdt_device = {
-+ .name = "at32_wdt",
-+ .id = 0,
-+ .resource = wdt_resource,
-+ .num_resources = ARRAY_SIZE(wdt_resource),
-+};
-+static struct platform_device gpio_device = {
-+ .name = "gpio",
-+ .id = 0,
-+ .resource = gpio_resource,
-+ .num_resources = ARRAY_SIZE(gpio_resource),
-+};
-+static struct platform_device pdca_device = {
-+ .dev.platform_data = &pdca_data,
-+ .name = "atmel_pdca",
-+ .id = 0,
-+ .resource = pdca_resource,
-+ .num_resources = ARRAY_SIZE(pdca_resource),
-+};
-+static struct platform_device smc_device = {
-+ .name = "smc",
-+ .id = 0,
-+ .resource = smc_resource,
-+ .num_resources = ARRAY_SIZE(smc_resource),
-+};
-+static struct platform_device dw_dmac0_device = {
-+ .dev.platform_data = &dw_dmac0_data,
-+ .name = "dw_dmac",
-+ .id = 0,
-+ .resource = dw_dmac0_resource,
-+ .num_resources = ARRAY_SIZE(dw_dmac0_resource),
-+};
-+
-+DEV_CLK(pclk, at32_intc0, pba, 0);
-+DEV_CLK(pclk, pm, pba, 1);
-+DEV_CLK(pclk, sdc, pba, 2);
-+DEV_CLK(pclk, ast0, pba, 3);
-+DEV_CLK(pclk, ast1, pba, 4);
-+DEV_CLK(pclk, wdt, pba, 5);
-+DEV_CLK(pclk, gpio, pba, 8);
-+DEV_CLK(hclk, pdca, hsb, 9);
-+DEV_CLK(pclk, pdca, pbb, 0);
-+DEV_CLK(pclk, smc, pbb, 5);
-+DEV_CLK(hclk, dw_dmac0, hsb, 10);
-+
-+static struct clk ebi_hclk = {
-+ .name = "ebi_hclk",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = hsb_clk_get_rate,
-+ .users = 1,
-+};
-+static struct clk hramc_clk = {
-+ .name = "hramc",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = hsb_clk_get_rate,
-+ .users = 1,
-+ .index = 4,
-+};
-+static struct clk sdramc_clk = {
-+ .name = "sdramc_clk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .users = 1,
-+ .index = 6,
-+};
-+
-+static int __init system_device_init(void)
-+{
-+ platform_device_register(&at32_intc0_device);
-+ platform_device_register(&pm_device);
-+ platform_device_register(&sdc_device);
-+ platform_device_register(&ast0_device);
-+ platform_device_register(&ast1_device);
-+ platform_device_register(&wdt_device);
-+ platform_device_register(&gpio_device);
-+ platform_device_register(&pdca_device);
-+ platform_device_register(&smc_device);
-+ platform_device_register(&dw_dmac0_device);
-+
-+ return 0;
-+}
-+core_initcall(system_device_init);
-+
-+/* --------------------------------------------------------------------
-+ * HMATRIX
-+ * -------------------------------------------------------------------- */
-+
-+struct clk at32_hmatrix_clk = {
-+ .name = "hmatrix_clk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 8,
-+ .users = 0,
-+};
-+
-+/* --------------------------------------------------------------------
-+ * USART
-+ * -------------------------------------------------------------------- */
-+
-+static struct atmel_uart_data atmel_usart0_data = {
-+ .use_dma_tx = 0,
-+ .use_dma_rx = 0,
-+};
-+static struct resource atmel_usart0_resource[] = {
-+ PBMEM(0xffd03000),
-+ IRQ(24),
-+};
-+static struct platform_device atmel_usart0_device = {
-+ .name = "atmel_usart",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &atmel_usart0_data,
-+ },
-+ .resource = atmel_usart0_resource,
-+ .num_resources = ARRAY_SIZE(atmel_usart0_resource),
-+};
-+DEV_CLK(usart, atmel_usart0, pba, 9);
-+
-+static struct atmel_uart_data atmel_usart1_data = {
-+ .use_dma_tx = 0,
-+ .use_dma_rx = 0,
-+};
-+static struct resource atmel_usart1_resource[] = {
-+ PBMEM(0xffd03400),
-+ IRQ(25),
-+};
-+static struct platform_device atmel_usart1_device = {
-+ .name = "atmel_usart",
-+ .id = 1,
-+ .dev = {
-+ .platform_data = &atmel_usart1_data,
-+ },
-+ .resource = atmel_usart1_resource,
-+ .num_resources = ARRAY_SIZE(atmel_usart1_resource),
-+};
-+DEV_CLK(usart, atmel_usart1, pba, 10);
-+
-+static struct atmel_uart_data atmel_usart2_data = {
-+ .use_dma_tx = 0,
-+ .use_dma_rx = 0,
-+};
-+static struct resource atmel_usart2_resource[] = {
-+ PBMEM(0xffd03800),
-+ IRQ(26),
-+};
-+static struct platform_device atmel_usart2_device = {
-+ .name = "atmel_usart",
-+ .id = 2,
-+ .dev = {
-+ .platform_data = &atmel_usart2_data,
-+ },
-+ .resource = atmel_usart2_resource,
-+ .num_resources = ARRAY_SIZE(atmel_usart2_resource),
-+};
-+DEV_CLK(usart, atmel_usart2, pba, 11);
-+
-+static struct atmel_uart_data atmel_usart3_data = {
-+ .use_dma_tx = 0,
-+ .use_dma_rx = 0,
-+};
-+static struct resource atmel_usart3_resource[] = {
-+ PBMEM(0xffd03c00),
-+ IRQ(27),
-+};
-+static struct platform_device atmel_usart3_device = {
-+ .name = "atmel_usart",
-+ .id = 3,
-+ .dev = {
-+ .platform_data = &atmel_usart3_data,
-+ },
-+ .resource = atmel_usart3_resource,
-+ .num_resources = ARRAY_SIZE(atmel_usart3_resource),
-+};
-+DEV_CLK(usart, atmel_usart3, pba, 12);
-+
-+static struct atmel_uart_data atmel_usart4_data = {
-+ .use_dma_tx = 0,
-+ .use_dma_rx = 0,
-+};
-+static struct resource atmel_usart4_resource[] = {
-+ PBMEM(0xffd04000),
-+ IRQ(28),
-+};
-+static struct platform_device atmel_usart4_device = {
-+ .name = "atmel_usart",
-+ .id = 4,
-+ .dev = {
-+ .platform_data = &atmel_usart4_data,
-+ },
-+ .resource = atmel_usart4_resource,
-+ .num_resources = ARRAY_SIZE(atmel_usart4_resource),
-+};
-+DEV_CLK(usart, atmel_usart4, pba, 13);
-+
-+static struct atmel_uart_data atmel_usart5_data = {
-+ .use_dma_tx = 0,
-+ .use_dma_rx = 0,
-+};
-+static struct resource atmel_usart5_resource[] = {
-+ PBMEM(0xffd04400),
-+ IRQ(29),
-+};
-+static struct platform_device atmel_usart5_device = {
-+ .name = "atmel_usart",
-+ .id = 5,
-+ .dev = {
-+ .platform_data = &atmel_usart5_data,
-+ },
-+ .resource = atmel_usart5_resource,
-+ .num_resources = ARRAY_SIZE(atmel_usart5_resource),
-+};
-+DEV_CLK(usart, atmel_usart5, pba, 14);
-+
-+static void __init configure_usart0_pins(void)
-+{
-+ /* RXD | TXD */
-+ select_peripheral(PB, (1 << 14) | (1 << 15), PERIPH_B, 0);
-+}
-+
-+static void __init configure_usart1_pins(void)
-+{
-+ /* TXD | RXD */
-+ select_peripheral(PA, (1 << 8) | (1 << 9), PERIPH_A, 0);
-+}
-+
-+static void __init configure_usart2_pins(void)
-+{
-+ /* TXD | RXD */
-+ select_peripheral(PA, (1 << 16) | (1 << 17), PERIPH_A, 0);
-+}
-+
-+static void __init configure_usart3_pins(void)
-+{
-+ /* RXD | TXD */
-+ select_peripheral(PC, (1 << 10) | (1 << 11), PERIPH_A, 0);
-+}
-+
-+static void __init configure_usart4_pins(void)
-+{
-+ /* TXD | RXD */
-+ select_peripheral(PA, (1 << 14) | (1 << 15), PERIPH_A, 0);
-+}
-+
-+static void __init configure_usart5_pins(void)
-+{
-+ /* RXD | TXD */
-+ select_peripheral(PA, (1 << 22) | (1 << 23), PERIPH_A, 0);
-+}
-+
-+static struct platform_device *__initdata at32_usarts[6];
-+
-+void __init at32_map_usart(unsigned int hw_id, unsigned int line)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (hw_id) {
-+ case 0:
-+ pdev = &atmel_usart0_device;
-+ configure_usart0_pins();
-+ break;
-+ case 1:
-+ pdev = &atmel_usart1_device;
-+ configure_usart1_pins();
-+ break;
-+ case 2:
-+ pdev = &atmel_usart2_device;
-+ configure_usart2_pins();
-+ break;
-+ case 3:
-+ pdev = &atmel_usart3_device;
-+ configure_usart3_pins();
-+ break;
-+ case 4:
-+ pdev = &atmel_usart4_device;
-+ configure_usart4_pins();
-+ break;
-+ case 5:
-+ pdev = &atmel_usart5_device;
-+ configure_usart5_pins();
-+ break;
-+ default:
-+ return;
-+ }
-+
-+ if (PXSEG(pdev->resource[0].start) == P4SEG) {
-+ /* Addresses in the P4 segment are permanently mapped 1:1 */
-+ struct atmel_uart_data *data = pdev->dev.platform_data;
-+ data->regs = (void __iomem __force *)pdev->resource[0].start;
-+ }
-+
-+ pdev->id = line;
-+ at32_usarts[line] = pdev;
-+}
-+
-+struct platform_device *__init at32_add_device_usart(unsigned int id)
-+{
-+ platform_device_register(at32_usarts[id]);
-+ return at32_usarts[id];
-+}
-+
-+struct platform_device *atmel_default_console_device;
-+
-+void __init at32_setup_serial_console(unsigned int usart_id)
-+{
-+ atmel_default_console_device = at32_usarts[usart_id];
-+}
-+
-+/* --------------------------------------------------------------------
-+ * Ethernet
-+ * -------------------------------------------------------------------- */
-+
-+static u64 macb0_dma_mask = DMA_32BIT_MASK;
-+static struct resource macb0_resource[] __initdata = {
-+ PBMEM(0xffe04000),
-+ IRQ(8),
-+};
-+static struct clk macb0_hclk = {
-+ .name = "hclk",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = hsb_clk_get_rate,
-+ .index = 8,
-+};
-+static struct clk macb0_pclk = {
-+ .name = "pclk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 4,
-+};
-+
-+struct platform_device *__init
-+at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
-+{
-+ struct platform_device *pdev;
-+ u32 pin_mask_a;
-+ u32 pin_mask_c;
-+
-+ if (id != 0 || !data)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("macb", id);
-+ if (!pdev)
-+ return NULL;
-+
-+ if (platform_device_add_resources(pdev, macb0_resource,
-+ ARRAY_SIZE(macb0_resource)))
-+ goto out_free_pdev;
-+
-+ if (platform_device_add_data(pdev, data,
-+ sizeof(struct eth_platform_data)))
-+ goto out_free_pdev;
-+
-+ pin_mask_a = (1 << 4); /* RXDV */
-+ pin_mask_c = (1 << 10); /* MDC */
-+ pin_mask_c |= (1 << 11); /* MDIO */
-+ pin_mask_c |= (1 << 12); /* TXCK */
-+ pin_mask_c |= (1 << 14); /* RXD0 */
-+ pin_mask_c |= (1 << 15); /* RXD1 */
-+ pin_mask_c |= (1 << 16); /* RXER */
-+ pin_mask_c |= (1 << 18); /* TXEN */
-+ pin_mask_c |= (1 << 19); /* TXD0 */
-+ pin_mask_c |= (1 << 20); /* TXD1 */
-+
-+ if (!data->is_rmii) {
-+ pin_mask_a |= (1<<0); /* COL */
-+ pin_mask_a |= (1<<1); /* RXD2 */
-+ pin_mask_a |= (1<<2); /* RXD3 */
-+ pin_mask_a |= (1<<3); /* RXCK */
-+ pin_mask_a |= (1<<5); /* TXER */
-+ pin_mask_a |= (1<<6); /* TXD2 */
-+ pin_mask_a |= (1<<7); /* TXD3 */
-+ pin_mask_c |= (1<<13); /* CRS */
-+ pin_mask_c |= (1<<17); /* SPD */
-+ }
-+
-+ select_peripheral(PA, pin_mask_a, PERIPH_B, 0);
-+ select_peripheral(PC, pin_mask_c, PERIPH_C, 0);
-+
-+ pdev->dev.dma_mask = &macb0_dma_mask;
-+ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
-+
-+ macb0_hclk.dev = &pdev->dev;
-+ macb0_pclk.dev = &pdev->dev;
-+
-+ platform_device_add(pdev);
-+
-+ return pdev;
-+
-+out_free_pdev:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * SPI
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_spi_resource[][2] __initdata = {
-+ {
-+ PBMEM(0xffe05400),
-+ IRQ(36),
-+ }, {
-+ PBMEM(0xffe05800),
-+ IRQ(37),
-+ }, {
-+ PBMEM(0xffe05c00),
-+ IRQ(38),
-+ }, {
-+ PBMEM(0xffe06000),
-+ IRQ(39),
-+ }
-+};
-+static struct clk atmel_spi_clk[] = {
-+ {
-+ .name = "spi_clk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 9,
-+ }, {
-+ .name = "spi_clk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 10,
-+ }, {
-+ .name = "spi_clk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 11,
-+ }, {
-+ .name = "spi_clk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 12,
-+ }
-+};
-+static int __initdata atmel_spi_pins[][4] = {
-+ {
-+ /* SPI0 */
-+ GPIO_PIN_PB(3), GPIO_PIN_PB(4),
-+ GPIO_PIN_PB(5), GPIO_PIN_PB(6),
-+ }, {
-+ /* SPI1 */
-+ GPIO_PIN_PB(4), -1, -1, -1,
-+ }, {
-+ /* SPI2 */
-+ GPIO_PIN_PA(28), -1, -1, -1,
-+ }, {
-+ /* SPI3 */
-+ GPIO_PIN_PA(27), GPIO_PIN_PA(20),
-+ GPIO_PIN_PA(29), GPIO_PIN_PA(30),
-+ }
-+};
-+
-+
-+static void __init at32_spi_setup_dw_dma(unsigned int id,
-+ struct atmel_spi_pdata *pdata)
-+{
-+ struct dw_dma_slave *rx_dws;
-+ struct dw_dma_slave *tx_dws;
-+
-+ if (pdata->rx_dma_slave)
-+ rx_dws = kmemdup(to_dw_dma_slave(pdata->rx_dma_slave),
-+ sizeof(struct dw_dma_slave), GFP_KERNEL);
-+ else
-+ rx_dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL);
-+ if (pdata->tx_dma_slave)
-+ tx_dws = kmemdup(to_dw_dma_slave(pdata->tx_dma_slave),
-+ sizeof(struct dw_dma_slave), GFP_KERNEL);
-+ else
-+ tx_dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL);
-+
-+ rx_dws->slave.dma_dev = tx_dws->slave.dma_dev = &dw_dmac0_device.dev;
-+ rx_dws->slave.reg_width = tx_dws->slave.reg_width
-+ = DMA_SLAVE_WIDTH_8BIT;
-+
-+ rx_dws->cfg_hi = DWC_CFGH_SRC_PER(2);
-+ tx_dws->cfg_hi = DWC_CFGH_DST_PER(3);
-+ rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL
-+ | DWC_CFGL_HS_SRC_POL);
-+ tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL
-+ | DWC_CFGL_HS_SRC_POL);
-+
-+ pdata->rx_dma_slave = &rx_dws->slave;
-+ pdata->tx_dma_slave = &tx_dws->slave;
-+}
-+
-+static void __init at32_spi_setup_pdca(unsigned int id,
-+ struct atmel_spi_pdata *pdata)
-+{
-+ struct pdca_slave *rx_pslave;
-+ struct pdca_slave *tx_pslave;
-+
-+ if (pdata->rx_dma_slave)
-+ rx_pslave = kmemdup(dma_to_pdca_slave(pdata->rx_dma_slave),
-+ sizeof(struct pdca_slave), GFP_KERNEL);
-+ else
-+ rx_pslave = kzalloc(sizeof(struct pdca_slave), GFP_KERNEL);
-+ if (pdata->tx_dma_slave)
-+ tx_pslave = kmemdup(dma_to_pdca_slave(pdata->tx_dma_slave),
-+ sizeof(struct pdca_slave), GFP_KERNEL);
-+ else
-+ tx_pslave = kzalloc(sizeof(struct pdca_slave), GFP_KERNEL);
-+
-+ rx_pslave->slave.dma_dev = &pdca_device.dev;
-+ tx_pslave->slave.dma_dev = &pdca_device.dev;
-+ rx_pslave->slave.reg_width = DMA_SLAVE_WIDTH_8BIT;
-+ tx_pslave->slave.reg_width = DMA_SLAVE_WIDTH_8BIT;
-+
-+ rx_pslave->tx_periph_id = -1;
-+ tx_pslave->rx_periph_id = -1;
-+
-+ switch (id) {
-+ case 1:
-+ rx_pslave->rx_periph_id = 6;
-+ tx_pslave->tx_periph_id = 17;
-+ break;
-+ case 2:
-+ rx_pslave->rx_periph_id = 7;
-+ tx_pslave->tx_periph_id = 18;
-+ break;
-+ case 3:
-+ rx_pslave->rx_periph_id = 8;
-+ tx_pslave->tx_periph_id = 19;
-+ break;
-+ }
-+
-+ pdata->rx_dma_slave = &rx_pslave->slave;
-+ pdata->tx_dma_slave = &tx_pslave->slave;
-+}
-+
-+static void __init
-+at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
-+ unsigned int n, const int *pins)
-+{
-+ unsigned int mode;
-+ unsigned int cs;
-+ int pin;
-+
-+ for (; n; n--, b++) {
-+ b->bus_num = bus_num;
-+ cs = b->chip_select;
-+ if (cs >= 4 || !gpio_is_valid(pins[cs]))
-+ continue;
-+
-+ pin = (int)b->controller_data;
-+ if (!pin || !gpio_is_valid(pin)) {
-+ pin = pins[cs];
-+ b->controller_data = (void *)pin;
-+ }
-+
-+ mode = AT32_GPIOF_OUTPUT;
-+ if (!(b->mode & SPI_CS_HIGH))
-+ mode |= AT32_GPIOF_HIGH;
-+ at32_select_gpio(pin, mode);
-+ }
-+}
-+
-+struct platform_device *__init at32_add_device_spi(unsigned int id,
-+ struct spi_board_info *b, unsigned int n)
-+{
-+ struct atmel_spi_pdata pdata;
-+ struct platform_device *pdev;
-+
-+ BUILD_BUG_ON(ARRAY_SIZE(atmel_spi_resource)
-+ != ARRAY_SIZE(atmel_spi_clk));
-+
-+ if (id >= ARRAY_SIZE(atmel_spi_resource))
-+ return NULL;
-+
-+ pdev = platform_device_alloc("atmel_spi", id);
-+ if (!pdev)
-+ goto fail;
-+
-+ if (platform_device_add_resources(pdev, atmel_spi_resource[id],
-+ ARRAY_SIZE(atmel_spi_resource[id])))
-+ goto fail;
-+
-+ memset(&pdata, 0, sizeof(struct atmel_spi_pdata));
-+
-+ if (id == 0)
-+ at32_spi_setup_dw_dma(id, &pdata);
-+ else
-+ at32_spi_setup_pdca(id, &pdata);
-+ pdata.rx_dma_slave->dev = pdata.tx_dma_slave->dev = &pdev->dev;
-+
-+ if (platform_device_add_data(pdev, &pdata,
-+ sizeof(struct atmel_spi_pdata)))
-+ goto fail;
-+
-+ switch (id) {
-+ case 0:
-+ /* pullup MISO so a level is always defined */
-+ select_peripheral(PB, (1 << 1), PERIPH_A, AT32_GPIOF_PULLUP);
-+ /* MOSI | SCK */
-+ select_peripheral(PB, (1 << 0) | (1 << 2), PERIPH_A, 0);
-+
-+ at32_spi_setup_slaves(0, b, n, atmel_spi_pins[0]);
-+ break;
-+
-+ case 1:
-+ /* pullup MISO so a level is always defined */
-+ select_peripheral(PB, (1 << 7), PERIPH_B, AT32_GPIOF_PULLUP);
-+ /* MOSI | SCK */
-+ select_peripheral(PB, (1 << 6) | (1 << 5), PERIPH_B, 0);
-+
-+ at32_spi_setup_slaves(1, b, n, atmel_spi_pins[1]);
-+ break;
-+
-+ case 2:
-+ /* pullup MISO so a level is always defined */
-+ select_peripheral(PA, (1 << 30), PERIPH_B, AT32_GPIOF_PULLUP);
-+ /* MOSI | SCK */
-+ select_peripheral(PA, (1 << 31) || (1 << 29), PERIPH_B, 0);
-+
-+ at32_spi_setup_slaves(2, b, n, atmel_spi_pins[2]);
-+ break;
-+
-+ case 3:
-+ /* pullup MISO so a level is always defined */
-+ select_peripheral(PA, (1 << 25), PERIPH_A, AT32_GPIOF_PULLUP);
-+ /* MOSI | SCK */
-+ select_peripheral(PA, (1 << 24) | (1 << 26), PERIPH_A, 0);
-+
-+ at32_spi_setup_slaves(3, b, n, atmel_spi_pins[3]);
-+ break;
-+
-+ default:
-+ goto fail;
-+ }
-+
-+ atmel_spi_clk[id].dev = &pdev->dev;
-+ spi_register_board_info(b, n);
-+ platform_device_add(pdev);
-+
-+ return pdev;
-+
-+fail:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * MMC
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_mci0_resource[] __initdata = {
-+ PBMEM(0xfff00000),
-+ IRQ(43),
-+};
-+/* MCI is on the PBC bus, but it is controlled by the PBBMASK register */
-+static struct clk atmel_mci0_pclk = {
-+ .name = "mci_clk",
-+ .parent = &pbc_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 16,
-+};
-+
-+struct platform_device *__init
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
-+{
-+ struct platform_device *pdev;
-+ struct dw_dma_slave *dws;
-+ u32 pin_mask_1 = 0;
-+ u32 pin_mask_2 = 0;
-+
-+ if (id != 0)
-+ return NULL;
-+
-+ /* Must have at least one usable slot */
-+ if (!data->slot[0].bus_width && !data->slot[1].bus_width)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("atmel_mci", id);
-+ if (!pdev)
-+ goto fail;
-+
-+ if (platform_device_add_resources(pdev, atmel_mci0_resource,
-+ ARRAY_SIZE(atmel_mci0_resource)))
-+ goto fail;
-+
-+ if (data->dma_slave)
-+ dws = kmemdup(to_dw_dma_slave(data->dma_slave),
-+ sizeof(struct dw_dma_slave), GFP_KERNEL);
-+ else
-+ dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL);
-+
-+ dws->slave.dev = &pdev->dev;
-+ dws->slave.dma_dev = &dw_dmac0_device.dev;
-+ dws->slave.reg_width = DMA_SLAVE_WIDTH_32BIT;
-+ dws->cfg_hi = (DWC_CFGH_SRC_PER(0)
-+ | DWC_CFGH_DST_PER(1));
-+ dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL
-+ | DWC_CFGL_HS_SRC_POL);
-+
-+ data->dma_slave = &dws->slave;
-+
-+ if (platform_device_add_data(pdev, data,
-+ sizeof(struct mci_platform_data)))
-+ goto fail;
-+
-+ switch (data->slot[0].bus_width) {
-+ case 8:
-+ pin_mask_1 |= (1 << 20); /* DATA4 */
-+ pin_mask_1 |= (1 << 21); /* DATA5 */
-+ pin_mask_1 |= (1 << 22); /* DATA6 */
-+ pin_mask_1 |= (1 << 23); /* DATA7 */
-+ /* fall through */
-+ case 4:
-+ pin_mask_2 |= (1 << 19); /* DATA1 */
-+ pin_mask_2 |= (1 << 20); /* DATA2 */
-+ pin_mask_2 |= (1 << 21); /* DATA3 */
-+ /* fall through */
-+ case 1:
-+ pin_mask_2 |= (1 << 18); /* DATA0 */
-+ pin_mask_2 |= (1 << 17); /* CMD */
-+
-+ select_peripheral(PA, pin_mask_1, PERIPH_D, AT32_GPIOF_PULLUP);
-+ select_peripheral(PB, pin_mask_2, PERIPH_A, AT32_GPIOF_PULLUP);
-+ select_peripheral(PB, (1 << 16), PERIPH_A, 0); /* CLK */
-+
-+ if (gpio_is_valid(data->slot[0].detect_pin))
-+ at32_select_gpio(data->slot[0].detect_pin, 0);
-+ if (gpio_is_valid(data->slot[0].wp_pin))
-+ at32_select_gpio(data->slot[0].wp_pin, 0);
-+
-+ break;
-+ case 0:
-+ /* Slot is unused */
-+ break;
-+ default:
-+ goto fail;
-+ }
-+
-+ pin_mask_1 = 0;
-+
-+ switch (data->slot[1].bus_width) {
-+ case 8:
-+ pin_mask_1 |= (1 << 9); /* DATA7 */
-+ pin_mask_1 |= (1 << 8); /* DATA6 */
-+ pin_mask_1 |= (1 << 7); /* DATA5 */
-+ pin_mask_1 |= (1 << 6); /* DATA4 */
-+ /* fall through */
-+ case 4:
-+ pin_mask_1 |= (1 << 5); /* DATA3 */
-+ pin_mask_1 |= (1 << 4); /* DATA2 */
-+ pin_mask_1 |= (1 << 3); /* DATA1 */
-+ /* fall through */
-+ case 1:
-+ pin_mask_1 |= (1 << 2); /* DATA0 */
-+ pin_mask_1 |= (1 << 1); /* CMD */
-+
-+ select_peripheral(PC, pin_mask_1, PERIPH_A, AT32_GPIOF_PULLUP);
-+ select_peripheral(PC, (1 << 0), PERIPH_A, 0); /* CLK */
-+
-+ if (gpio_is_valid(data->slot[1].detect_pin))
-+ at32_select_gpio(data->slot[1].detect_pin, 0);
-+ if (gpio_is_valid(data->slot[1].wp_pin))
-+ at32_select_gpio(data->slot[1].wp_pin, 0);
-+
-+ break;
-+ case 0:
-+ /* Slot is unused */
-+ break;
-+ default:
-+ goto fail;
-+ }
-+
-+ atmel_mci0_pclk.dev = &pdev->dev;
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+fail:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * LCDC
-+ * -------------------------------------------------------------------- */
-+static u64 atmel_lcdfb0_dma_mask = DMA_32BIT_MASK;
-+static struct resource atmel_lcdfb0_resource[] __initdata = {
-+ {
-+ .start = 0xff000000,
-+ .end = 0xff000fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(3),
-+ {
-+ /* Placeholder for pre-allocated fb memory */
-+ .start = 0x00000000,
-+ .end = 0x00000000,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct clk atmel_lcdfb0_hck1 = {
-+ .name = "hck1",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = hsb_clk_get_rate,
-+ .index = 7,
-+};
-+static struct clk atmel_lcdfb0_pixclk = {
-+ .name = "lcdc_clk",
-+ .mode = genclk_mode,
-+ .get_rate = genclk_get_rate,
-+ .set_rate = genclk_set_rate,
-+ .set_parent = genclk_set_parent,
-+ .index = 6,
-+};
-+
-+struct platform_device *__init
-+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-+ unsigned long fbmem_start, unsigned long fbmem_len,
-+ u64 pin_mask)
-+{
-+ struct {
-+ struct atmel_lcdfb_info info;
-+ struct fb_monspecs monspecs;
-+ struct fb_videomode modedb[0];
-+ } *all_data;
-+ struct platform_device *pdev;
-+ unsigned int data_size;
-+ unsigned int modedb_size;
-+ unsigned int num_resources;
-+ int ret;
-+
-+ if (id > 0 || !data)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("atmel_lcdfb", id);
-+ if (!pdev)
-+ return NULL;
-+
-+ num_resources = ARRAY_SIZE(atmel_lcdfb0_resource);
-+ if (fbmem_len) {
-+ atmel_lcdfb0_resource[num_resources - 1].start = fbmem_start;
-+ atmel_lcdfb0_resource[num_resources - 1].end
-+ = fbmem_start + fbmem_len - 1;
-+ } else {
-+ num_resources--;
-+ }
-+
-+ if (platform_device_add_resources(pdev, atmel_lcdfb0_resource,
-+ num_resources))
-+ goto error;
-+
-+ /*
-+ * Allocate all data -- info struct, monspecs and modedb -- in
-+ * a single chunk.
-+ */
-+ modedb_size = data->default_monspecs->modedb_len
-+ * sizeof(struct fb_videomode);
-+ data_size = sizeof(*all_data) + modedb_size;
-+ all_data = kmalloc(data_size, GFP_KERNEL);
-+ if (!all_data)
-+ goto error;
-+
-+ memcpy(&all_data->info, data, sizeof(struct atmel_lcdfb_info));
-+ memcpy(&all_data->monspecs, data->default_monspecs,
-+ sizeof(struct fb_monspecs));
-+ memcpy(&all_data->modedb, data->default_monspecs->modedb, modedb_size);
-+
-+ ret = platform_device_add_data(pdev, all_data, data_size);
-+ kfree(all_data);
-+ if (ret)
-+ goto error;
-+
-+ /*
-+ * Update internal pointers to use memory allocated by
-+ * platform_device_add_data().
-+ */
-+ all_data = pdev->dev.platform_data;
-+ all_data->info.default_monspecs = &all_data->monspecs;
-+ all_data->monspecs.modedb = all_data->modedb;
-+
-+ select_peripheral(PD, 0x7fffffff, PERIPH_A, 0);
-+
-+ pdev->dev.dma_mask = &atmel_lcdfb0_dma_mask;
-+ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
-+
-+ atmel_lcdfb0_hck1.dev = &pdev->dev;
-+ atmel_lcdfb0_pixclk.dev = &pdev->dev;
-+
-+ clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
-+ clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+error:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * Media Post-Processor (MPOP)
-+ * -------------------------------------------------------------------- */
-+
-+static u64 atmel_mpopfb0_dma_mask = DMA_32BIT_MASK;
-+static struct resource atmel_mpopfb0_resource[] = {
-+ {
-+ /* Configuration interface */
-+ .start = 0xffe02000,
-+ .end = 0xffe02fff,
-+ .flags = IORESOURCE_MEM,
-+ }, {
-+ /* Data interface (output) */
-+ .start = 0xf0000000,
-+ .end = 0xf0ffffff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(4),
-+ {
-+ /* Placeholder for pre-allocated fb memory */
-+ .start = 0x00000000,
-+ .end = 0x00000000,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct clk atmel_mpopfb0_hclk = {
-+ .name = "hclk",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = hsb_clk_get_rate,
-+ .index = 12,
-+};
-+static struct clk atmel_mpopfb0_pclk = {
-+ .name = "pclk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 2,
-+};
-+
-+struct platform_device *__init at32_add_device_mpop(unsigned int id,
-+ struct platform_device *lcdc_pdev,
-+ unsigned long fbmem_start, unsigned long fbmem_len)
-+{
-+ struct platform_device *pdev;
-+ struct atmel_mpopfb_info info;
-+ unsigned int num_resources;
-+
-+ if (id != 0)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("atmel_mpopfb", id);
-+ if (!pdev)
-+ return NULL;
-+
-+ num_resources = ARRAY_SIZE(atmel_mpopfb0_resource);
-+ if (fbmem_len) {
-+ atmel_mpopfb0_resource[num_resources - 1].start = fbmem_start;
-+ atmel_mpopfb0_resource[num_resources - 1].end
-+ = fbmem_start + fbmem_len - 1;
-+ } else {
-+ num_resources--;
-+ }
-+ if (platform_device_add_resources(pdev, atmel_mpopfb0_resource,
-+ num_resources))
-+ goto error;
-+
-+ info.lcdc_pdev = lcdc_pdev;
-+ if (platform_device_add_data(pdev, &info, sizeof(info)))
-+ goto error;
-+
-+ pdev->dev.dma_mask = &atmel_mpopfb0_dma_mask;
-+ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
-+
-+ atmel_mpopfb0_hclk.dev = &pdev->dev;
-+ atmel_mpopfb0_pclk.dev = &pdev->dev;
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+error:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* -------------------------------------------------------------------
-+ * USB Host (OHCI/EHCI)
-+ * ------------------------------------------------------------------- */
-+
-+static u64 usbh_dma_mask = DMA_32BIT_MASK;
-+
-+static unsigned long parent_clk_get_rate(struct clk *clk)
-+{
-+ return clk->parent->get_rate(clk->parent);
-+}
-+
-+static void parent_clk_mode(struct clk *clk, int enabled)
-+{
-+ /* Parent clk enabled by clk core */
-+}
-+
-+/*
-+ * The UTMI clock is an internally controlled PLL. It is hardwired to
-+ * OSC2 and will run at 30 MHz or 60 MHz depending on the internal
-+ * UTMI <-> host controller data bus width.
-+ *
-+ * We can turn it on and off through the Power Manager. That's all.
-+ */
-+static void utmi_clk_mode(struct clk *clk, int enabled)
-+{
-+ u32 ppcr = pm_readl(PPCR);
-+
-+ if (enabled)
-+ /* Clear UTMI suspend signal */
-+ ppcr |= PM_BIT(PPCR_UTMI_CTRL);
-+ else
-+ /* Set UTMI suspend signal */
-+ ppcr &= ~PM_BIT(PPCR_UTMI_CTRL);
-+
-+ pm_writel(PPCR, ppcr | PM_BF(PPCR_KEY, 0x55));
-+ pm_writel(PPCR, ppcr | PM_BF(PPCR_KEY, 0xaa));
-+
-+ if (enabled)
-+ /* PLL startup time is 2.5 ms */
-+ udelay(2500);
-+}
-+
-+static unsigned long utmi_clk_get_rate(struct clk *clk)
-+{
-+ /*
-+ * Not sure about this, but I think the UTMI interface on
-+ * AP7200 is 16 bits wide, which means 30 MHz PHY clock.
-+ */
-+ return 30000000;
-+}
-+
-+static struct clk usbh_utmi_clk = {
-+ .name = "usbh_utmi_clk",
-+ .parent = &osc2,
-+ .mode = utmi_clk_mode,
-+ .get_rate = utmi_clk_get_rate,
-+};
-+
-+static struct clk usbh_hclk = {
-+ .name = "usbh_hclk",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = hsb_clk_get_rate,
-+ .index = 6,
-+};
-+
-+/*
-+ * UTMI and HSB clocks are shared between OHCI and EHCI. These wrappers
-+ * make sure both can use the clocks as if they had their own.
-+ */
-+static struct clk ohci_utmi_clk = {
-+ .name = "utmi_clk",
-+ .parent = &usbh_utmi_clk,
-+ .mode = parent_clk_mode,
-+ .get_rate = parent_clk_get_rate,
-+};
-+static struct clk ohci_hclk = {
-+ .name = "hclk",
-+ .parent = &usbh_hclk,
-+ .mode = parent_clk_mode,
-+ .get_rate = parent_clk_get_rate,
-+};
-+
-+static struct clk ehci_utmi_clk = {
-+ .name = "utmi_clk",
-+ .parent = &usbh_utmi_clk,
-+ .mode = parent_clk_mode,
-+ .get_rate = parent_clk_get_rate,
-+};
-+static struct clk ehci_hclk = {
-+ .name = "hclk",
-+ .parent = &usbh_hclk,
-+ .mode = parent_clk_mode,
-+ .get_rate = parent_clk_get_rate,
-+};
-+
-+/*
-+ * The USBH needs both a 48 MHz and a 12 MHz clock, and the 12 MHz
-+ * must be generated by dividing the 48 MHz clock. There's only one
-+ * generic clock hooked up to the USBH which we must use to generate
-+ * both.
-+ *
-+ * This can be done because GCLK0 generates an additional "divided
-+ * clock", which is the normal clock output further divided by four
-+ * (this is hardcoded, but not surprisingly, exactly what we need.)
-+ *
-+ * So we generate the clocks as follows:
-+ * OSC2 (12 MHz) -> PLL2 (48 MHz) --> GCLK0 undivided (48 MHz)
-+ * |-> GCLK0 divided (12 MHz)
-+ *
-+ * This clock is only used by the OHCI part of the controller, not the
-+ * EHCI part.
-+ */
-+static struct clk ohci_gclk = {
-+ .name = "ohci_clk",
-+ .parent = &gclk0,
-+ .mode = parent_clk_mode,
-+ .get_rate = parent_clk_get_rate,
-+};
-+
-+static struct resource usbh_ohci_resource[] __initdata = {
-+ {
-+ .start = 0xff400000,
-+ .end = 0xff400400,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(7),
-+};
-+
-+static struct resource usbh_ehci_resource[] __initdata = {
-+ {
-+ .start = 0xff300000,
-+ .end = 0xff300400,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(7),
-+};
-+
-+static void __init usbh_setup_pins(void)
-+{
-+ static bool already_done __initdata;
-+
-+ if (!already_done) {
-+ already_done = true;
-+ /* OC_EN_N | OC_FLAG_N */
-+ select_peripheral(PA, (1 << 18) | (1 << 19), PERIPH_D, 0);
-+ }
-+}
-+
-+struct platform_device *__init at32_add_device_ohci(unsigned int id)
-+{
-+ struct platform_device *pdev;
-+
-+ if (id != 0)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("ohci", id);
-+ if (!pdev)
-+ goto error;
-+
-+ if (platform_device_add_resources(pdev, usbh_ohci_resource,
-+ ARRAY_SIZE(usbh_ohci_resource)))
-+ goto error;
-+
-+ pdev->dev.dma_mask = &usbh_dma_mask;
-+ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
-+
-+ clk_set_parent(&pll2, &osc2);
-+ if (clk_round_rate(&pll2, 48000000) != 48000000) {
-+ pr_debug("USBH OHCI: Cannot generate 48 MHz clock\n");
-+ goto error;
-+ }
-+ clk_set_rate(&pll2, 48000000);
-+
-+ clk_set_parent(&gclk0, &pll2);
-+ clk_set_rate(&gclk0, 48000000);
-+
-+ ohci_utmi_clk.dev = &pdev->dev;
-+ ohci_hclk.dev = &pdev->dev;
-+ ohci_gclk.dev = &pdev->dev;
-+
-+ usbh_setup_pins();
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+error:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+struct platform_device *__init at32_add_device_ehci(unsigned int id)
-+{
-+ struct platform_device *pdev;
-+
-+ if (id != 0)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("ehci", id);
-+ if (!pdev)
-+ goto error;
-+
-+ if (platform_device_add_resources(pdev, usbh_ehci_resource,
-+ ARRAY_SIZE(usbh_ehci_resource)))
-+ goto error;
-+
-+ pdev->dev.dma_mask = &usbh_dma_mask;
-+ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
-+
-+ ehci_utmi_clk.dev = &pdev->dev;
-+ ehci_hclk.dev = &pdev->dev;
-+
-+ usbh_setup_pins();
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+error:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* -------------------------------------------------------------------
-+ * NAND Flash / SmartMedia
-+ * ------------------------------------------------------------------- */
-+static struct resource smc_cs3_resource[] __initdata = {
-+ {
-+ .start = 0x24000000,
-+ .end = 0x27ffffff,
-+ .flags = IORESOURCE_MEM,
-+ }, {
-+ .start = 0xffe04c00,
-+ .end = 0xffe04fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+struct platform_device *__init
-+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
-+{
-+ struct platform_device *pdev;
-+
-+ if (id != 0 || !data)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("atmel_nand", id);
-+ if (!pdev)
-+ goto error;
-+
-+ if (platform_device_add_resources(pdev, smc_cs3_resource,
-+ ARRAY_SIZE(smc_cs3_resource)))
-+ goto error;
-+
-+ if (platform_device_add_data(pdev, data,
-+ sizeof(struct atmel_nand_data)))
-+ goto error;
-+
-+ hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_NAND_ENABLE);
-+
-+ /* NANDOE | NANDWE */
-+ select_peripheral(PF, (1 << 0) | (1 << 1), PERIPH_A, 0);
-+
-+ if (gpio_is_valid(data->enable_pin))
-+ at32_select_gpio(data->enable_pin,
-+ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-+ if (gpio_is_valid(data->det_pin))
-+ at32_select_gpio(data->det_pin, 0);
-+ if (gpio_is_valid(data->rdy_pin))
-+ at32_select_gpio(data->rdy_pin, 0);
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+error:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* -------------------------------------------------------------------
-+ * Clock list
-+ * ------------------------------------------------------------------- */
-+static __initdata struct clk *init_clocks[] = {
-+ &rcosc,
-+ &osc0,
-+ &osc1,
-+ &osc2,
-+ &osc32,
-+ &pll0,
-+ &pll1,
-+ &pll2,
-+ &cpu_clk,
-+ &hsb_clk,
-+ &pba_clk,
-+ &pbb_clk,
-+ &pbc_clk,
-+ &gclk0,
-+ &gclk1,
-+ &gclk2,
-+ &gclk3,
-+ &gclk4,
-+ &gclk5,
-+ &at32_intc0_pclk,
-+ &pm_pclk,
-+ &sdc_pclk,
-+ &ast0_pclk,
-+ &ast1_pclk,
-+ &wdt_pclk,
-+ &gpio_pclk,
-+ &pdca_hclk,
-+ &pdca_pclk,
-+ &ebi_hclk,
-+ &hramc_clk,
-+ &smc_pclk,
-+ &sdramc_clk,
-+ &dw_dmac0_hclk,
-+ &atmel_usart0_usart,
-+ &atmel_usart1_usart,
-+ &atmel_usart2_usart,
-+ &atmel_usart3_usart,
-+ &atmel_usart4_usart,
-+ &atmel_usart5_usart,
-+ &atmel_spi_clk[0],
-+ &atmel_spi_clk[1],
-+ &atmel_spi_clk[2],
-+ &atmel_spi_clk[3],
-+ &macb0_hclk,
-+ &macb0_pclk,
-+ &atmel_mci0_pclk,
-+ &atmel_lcdfb0_hck1,
-+ &atmel_lcdfb0_pixclk,
-+ &atmel_mpopfb0_hclk,
-+ &atmel_mpopfb0_pclk,
-+ &usbh_utmi_clk,
-+ &usbh_hclk,
-+ &ohci_utmi_clk,
-+ &ohci_hclk,
-+ &ohci_gclk,
-+ &ehci_utmi_clk,
-+ &ehci_hclk,
-+};
-+
-+static void pll_init_parent(struct clk *pll)
-+{
-+ u32 ctrl;
-+
-+ ctrl = pm_readl(PLL[pll->index]);
-+ switch (PM_BFEXT(PLLx_PLLOSC, ctrl)) {
-+ case 0:
-+ pll->parent = &osc0;
-+ break;
-+ case 1:
-+ pll->parent = &osc1;
-+ break;
-+ case 2:
-+ pll->parent = &osc2;
-+ break;
-+ }
-+}
-+
-+static void ap7200_power_off(void)
-+{
-+ /*
-+ * Clear all wakeup events so that we don't wake up
-+ * immediately after we shut down.
-+ */
-+ sdc_writel(ECR, ~0UL);
-+ sdc_readl(STATUS);
-+ asm volatile("sleep %0; sub pc, -2"
-+ :: "i"(CPU_SLEEP_SHUTDOWN)
-+ : "memory");
-+}
-+
-+void __init setup_platform(void)
-+{
-+ unsigned int i;
-+ u32 cpu_mask;
-+ u32 hsb_mask;
-+ u32 pba_mask;
-+ u32 pbb_mask;
-+
-+ switch (PM_BFEXT(MCCTRL_MCSEL, pm_readl(MCCTRL))) {
-+ case 0:
-+ main_clock = &rcosc;
-+ break;
-+ case 1:
-+ main_clock = &osc0;
-+ break;
-+ case 2:
-+ main_clock = &pll0;
-+ break;
-+ }
-+
-+ cpu_clk.parent = main_clock;
-+
-+ pll_init_parent(&pll0);
-+ pll_init_parent(&pll1);
-+ pll_init_parent(&pll2);
-+
-+ genclk_init_parent(&gclk0);
-+ genclk_init_parent(&gclk1);
-+ genclk_init_parent(&gclk2);
-+ genclk_init_parent(&gclk3);
-+ genclk_init_parent(&gclk4);
-+ genclk_init_parent(&gclk5);
-+ genclk_init_parent(&atmel_lcdfb0_pixclk);
-+
-+ /*
-+ * Turn on all clocks that have at least one user already, and
-+ * turn off everything else. We only do this for module
-+ * clocks, and even though it isn't particularly pretty to
-+ * check the address of the mode function, it should do the
-+ * trick...
-+ */
-+ cpu_mask = 0x10003;
-+ hsb_mask = pba_mask = pbb_mask = 0;
-+
-+ /* Make sure we don't disable the power manager or the SDRAM */
-+ pm_pclk.users = 1;
-+ pm_pclk.parent->users = 1;
-+ ebi_hclk.users = 1;
-+
-+ /* Can't recursively call clk_enable() from any of the clk ops */
-+ sdc_pclk.users = 1;
-+
-+ for (i = 0; i < ARRAY_SIZE(init_clocks); i++) {
-+ struct clk *clk = init_clocks[i];
-+
-+ /* first, register clock */
-+ at32_clk_register(clk);
-+
-+ if (clk->users == 0)
-+ continue;
-+
-+ if (clk->mode == &cpu_clk_mode)
-+ cpu_mask |= 1 << clk->index;
-+ else if (clk->mode == &hsb_clk_mode)
-+ hsb_mask |= 1 << clk->index;
-+ else if (clk->mode == &pba_clk_mode)
-+ pba_mask |= 1 << clk->index;
-+ else if (clk->mode == &pbb_clk_mode)
-+ pbb_mask |= 1 << clk->index;
-+ }
-+
-+ pm_writel(CPUMASK, cpu_mask);
-+ pm_writel(HSBMASK, hsb_mask);
-+ pm_writel(PBAMASK, pba_mask);
-+ pm_writel(PBBMASK, pbb_mask);
-+
-+ at32_gpio_init(&gpio_device);
-+
-+ /* Enter shutdown mode when powering off. This happens very
-+ * early, so board code may still override this. */
-+ pm_power_off = ap7200_power_off;
-+
-+ /* Enable WAKE pin */
-+ sdc_writel(CTRL, SDC_BIT(CTRL_PIN_EN) | SDC_BIT(CTRL_AST_EN)
-+ | SDC_BIT(CTRL_OCD_EN) | SDC_BIT(CTRL_JTAG_EN)
-+ | SDC_BF(CTRL_KEY, 0x55));
-+ sdc_writel(CTRL, SDC_BIT(CTRL_PIN_EN) | SDC_BIT(CTRL_AST_EN)
-+ | SDC_BIT(CTRL_OCD_EN) | SDC_BIT(CTRL_JTAG_EN)
-+ | SDC_BF(CTRL_KEY, 0xaa));
-+}
-+
-+void __init platform_time_init(void)
-+{
-+ ast_time_init(&ast1_device, AST_CLOCK_PB);
-+}
-+
-+unsigned long at32_get_reset_cause(void)
-+{
-+ return pm_readl(RCAUSE);
-+}
-+
-+struct gen_pool *sram_pool;
-+
-+static int __init sram_init(void)
-+{
-+ struct gen_pool *pool;
-+
-+ /* 1KiB granularity */
-+ pool = gen_pool_create(10, -1);
-+ if (!pool)
-+ goto fail;
-+
-+ if (gen_pool_add(pool, 0x08000000, 0x10000, -1))
-+ goto err_pool_add;
-+
-+ sram_pool = pool;
-+ return 0;
-+
-+err_pool_add:
-+ gen_pool_destroy(pool);
-+fail:
-+ pr_err("Failed to create SRAM pool\n");
-+ return -ENOMEM;
-+}
-+core_initcall(sram_init);
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/extint.c linux-2.6.28.2/arch/avr32/mach-at32ap/extint.c
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/extint.c 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/extint.c 2009-01-29 08:52:49.000000000 +0100
-@@ -17,6 +17,8 @@
-
- #include <asm/io.h>
-
-+#include <mach/cpu.h>
-+
- /* EIC register offsets */
- #define EIC_IER 0x0000
- #define EIC_IDR 0x0004
-@@ -26,24 +28,18 @@
- #define EIC_MODE 0x0014
- #define EIC_EDGE 0x0018
- #define EIC_LEVEL 0x001c
--#define EIC_NMIC 0x0024
-
--/* Bitfields in NMIC */
--#define EIC_NMIC_ENABLE (1 << 0)
-+/* This is only valid on v1 (AP700x) */
-+#define EIC_NMIC 0x0024
-+# define EIC_NMIC_ENABLE (1 << 0)
-
--/* Bit manipulation macros */
--#define EIC_BIT(name) \
-- (1 << EIC_##name##_OFFSET)
--#define EIC_BF(name,value) \
-- (((value) & ((1 << EIC_##name##_SIZE) - 1)) \
-- << EIC_##name##_OFFSET)
--#define EIC_BFEXT(name,value) \
-- (((value) >> EIC_##name##_OFFSET) \
-- & ((1 << EIC_##name##_SIZE) - 1))
--#define EIC_BFINS(name,value,old) \
-- (((old) & ~(((1 << EIC_##name##_SIZE) - 1) \
-- << EIC_##name##_OFFSET)) \
-- | EIC_BF(name,value))
-+/* These are only valid on v3 (AP720x) */
-+#define EIC_FILTER 0x0020
-+#define EIC_TEST 0x0024
-+#define EIC_ASYNC 0x0028
-+#define EIC_EN 0x0030
-+#define EIC_DIS 0x0034
-+#define EIC_CTRL 0x0038
-
- /* Register access macros */
- #define eic_readl(port,reg) \
-@@ -60,36 +56,68 @@
- static struct eic *nmi_eic;
- static bool nmi_enabled;
-
-+static inline int eic_version(struct eic *eic)
-+{
-+ if (cpu_is_at32ap7000())
-+ return 1;
-+ if (cpu_is_at32ap7200())
-+ return 3;
-+
-+ BUG();
-+}
-+
-+static inline int eic_irq_bitmask(struct eic *eic, unsigned int irq)
-+{
-+ irq -= eic->first_irq;
-+
-+ if (eic_version(eic) > 2)
-+ irq++;
-+ return 1 << irq;
-+}
-+
- static void eic_ack_irq(unsigned int irq)
- {
- struct eic *eic = get_irq_chip_data(irq);
-- eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
-+ eic_writel(eic, ICR, eic_irq_bitmask(eic, irq));
- }
-
- static void eic_mask_irq(unsigned int irq)
- {
- struct eic *eic = get_irq_chip_data(irq);
-- eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
-+ eic_writel(eic, IDR, eic_irq_bitmask(eic, irq));
- }
-
- static void eic_mask_ack_irq(unsigned int irq)
- {
- struct eic *eic = get_irq_chip_data(irq);
-- eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
-- eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
-+ eic_writel(eic, ICR, eic_irq_bitmask(eic, irq));
-+ eic_writel(eic, IDR, eic_irq_bitmask(eic, irq));
- }
-
- static void eic_unmask_irq(unsigned int irq)
- {
- struct eic *eic = get_irq_chip_data(irq);
-- eic_writel(eic, IER, 1 << (irq - eic->first_irq));
-+ eic_writel(eic, IER, eic_irq_bitmask(eic, irq));
-+}
-+
-+/* The following two hooks are only used on v2+ controllers */
-+static void eic_enable_irq(unsigned int irq)
-+{
-+ struct eic *eic = get_irq_chip_data(irq);
-+ eic_writel(eic, EN, eic_irq_bitmask(eic, irq));
-+}
-+
-+static void eic_disable_irq(unsigned int irq)
-+{
-+ struct eic *eic = get_irq_chip_data(irq);
-+ eic_writel(eic, DIS, eic_irq_bitmask(eic, irq));
- }
-
- static int eic_set_irq_type(unsigned int irq, unsigned int flow_type)
- {
- struct eic *eic = get_irq_chip_data(irq);
- struct irq_desc *desc;
-- unsigned int i = irq - eic->first_irq;
-+ unsigned int irq_bitmask = eic_irq_bitmask(eic, irq);
- u32 mode, edge, level;
- int ret = 0;
-
-@@ -105,20 +133,20 @@
-
- switch (flow_type) {
- case IRQ_TYPE_LEVEL_LOW:
-- mode |= 1 << i;
-- level &= ~(1 << i);
-+ mode |= irq_bitmask;
-+ level &= ~irq_bitmask;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
-- mode |= 1 << i;
-- level |= 1 << i;
-+ mode |= irq_bitmask;
-+ level |= irq_bitmask;
- break;
- case IRQ_TYPE_EDGE_RISING:
-- mode &= ~(1 << i);
-- edge |= 1 << i;
-+ mode &= ~irq_bitmask;
-+ edge |= irq_bitmask;
- break;
- case IRQ_TYPE_EDGE_FALLING:
-- mode &= ~(1 << i);
-- edge &= ~(1 << i);
-+ mode &= ~irq_bitmask;
-+ edge &= ~irq_bitmask;
- break;
- default:
- ret = -EINVAL;
-@@ -160,6 +188,11 @@
- status = eic_readl(eic, ISR);
- pending = status & eic_readl(eic, IMR);
-
-+ if (eic_version(eic) > 1) {
-+ status >>= 1;
-+ pending >>= 1;
-+ }
-+
- while (pending) {
- i = fls(pending) - 1;
- pending &= ~(1 << i);
-@@ -172,16 +205,34 @@
- {
- nmi_enabled = true;
-
-- if (nmi_eic)
-- eic_writel(nmi_eic, NMIC, EIC_NMIC_ENABLE);
-+ if (nmi_eic) {
-+ if (eic_version(nmi_eic) > 2) {
-+ eic_writel(nmi_eic, EN, 1 << 0);
-+ eic_writel(nmi_eic, IER, 1 << 0);
-+ } else if (eic_version(nmi_eic) > 1) {
-+ eic_writel(nmi_eic, EN, 1 << 8);
-+ eic_writel(nmi_eic, IER, 1 << 8);
-+ } else {
-+ eic_writel(nmi_eic, NMIC, EIC_NMIC_ENABLE);
-+ }
-+ }
-
- return 0;
- }
-
- void nmi_disable(void)
- {
-- if (nmi_eic)
-- eic_writel(nmi_eic, NMIC, 0);
-+ if (nmi_eic) {
-+ if (eic_version(nmi_eic) > 2) {
-+ eic_writel(nmi_eic, IDR, 1 << 0);
-+ eic_writel(nmi_eic, DIS, 1 << 0);
-+ } else if (eic_version(nmi_eic) > 1) {
-+ eic_writel(nmi_eic, IDR, 1 << 8);
-+ eic_writel(nmi_eic, DIS, 1 << 8);
-+ } else {
-+ eic_writel(nmi_eic, NMIC, 0);
-+ }
-+ }
-
- nmi_enabled = false;
- }
-@@ -230,6 +281,15 @@
- eic_writel(eic, EDGE, 0UL);
- eic_writel(eic, LEVEL, 0UL);
-
-+ /*
-+ * v2+ controllers have an extra enable/disable/mask set of
-+ * registers.
-+ */
-+ if (eic_version(eic) >= 2) {
-+ eic_chip.enable = eic_enable_irq;
-+ eic_chip.disable = eic_disable_irq;
-+ }
-+
- eic->chip = &eic_chip;
-
- for (i = 0; i < nr_of_irqs; i++) {
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/gpio-v2.c linux-2.6.28.2/arch/avr32/mach-at32ap/gpio-v2.c
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/gpio-v2.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/gpio-v2.c 2009-01-29 08:52:49.000000000 +0100
-@@ -0,0 +1,534 @@
-+/*
-+ * Atmel GPIO Port Multiplexer support
-+ *
-+ * Copyright (C) 2004-2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/debugfs.h>
-+#include <linux/fs.h>
-+#include <linux/gpio.h>
-+#include <linux/io.h>
-+#include <linux/irq.h>
-+#include <linux/platform_device.h>
-+
-+#include <mach/portmux.h>
-+#include <mach/chip.h>
-+
-+#include "gpio-v2.h"
-+
-+/*
-+ * One chip corresponds with one bank of I/O registers. They're really
-+ * all on the same controller.
-+ */
-+struct atmel_gpio_chip {
-+ void __iomem *regs;
-+ u32 pinmux_mask;
-+ struct gpio_chip chip;
-+ char name[8];
-+ unsigned int bank;
-+ int irq;
-+};
-+
-+/* ...which means we only have one clock and one platform device */
-+static struct clk *gpio_clk;
-+static struct atmel_gpio_chip gpio_dev[NR_GPIO_BANKS];
-+
-+/* Pin multiplexing API */
-+static DEFINE_SPINLOCK(gpio_lock);
-+
-+static struct atmel_gpio_chip *to_atmel_gpio_chip(struct gpio_chip *chip)
-+{
-+ return container_of(chip, struct atmel_gpio_chip, chip);
-+}
-+
-+static struct atmel_gpio_chip *pin_to_chip(unsigned int gpio)
-+{
-+ struct atmel_gpio_chip *chip;
-+ unsigned int index;
-+
-+ index = gpio >> 5;
-+ if (index >= NR_GPIO_BANKS)
-+ return NULL;
-+ chip = &gpio_dev[index];
-+ if (!chip->regs)
-+ return NULL;
-+
-+ return chip;
-+}
-+
-+/* Pin multiplexing API */
-+
-+void __init at32_select_periph(unsigned int port, u32 pin_mask,
-+ unsigned int periph, unsigned long flags)
-+{
-+ struct atmel_gpio_chip *chip;
-+
-+ chip = pin_to_chip(port);
-+ if (unlikely(!chip)) {
-+ printk("GPIO: invalid port %u\n", port);
-+ goto fail;
-+ }
-+
-+ /* Test if any of the requested pins is already muxed */
-+ spin_lock(&gpio_lock);
-+ if (unlikely(gpiochip_is_requested(&chip->chip, port)
-+ || unlikely(pin_mask & chip->pinmux_mask))) {
-+ printk(KERN_WARNING "%s: pin(s) busy (requested 0x%x, busy 0x%x)\n",
-+ chip->name, pin_mask, chip->pinmux_mask & pin_mask);
-+ spin_unlock(&gpio_lock);
-+ goto fail;
-+ }
-+
-+ switch (periph) {
-+ case GPIO_PERIPH_A:
-+ gpio_writel(chip, PMR0C, pin_mask);
-+ gpio_writel(chip, PMR1C, pin_mask);
-+ break;
-+ case GPIO_PERIPH_B:
-+ gpio_writel(chip, PMR0S, pin_mask);
-+ gpio_writel(chip, PMR1C, pin_mask);
-+ break;
-+ case GPIO_PERIPH_C:
-+ gpio_writel(chip, PMR0C, pin_mask);
-+ gpio_writel(chip, PMR1S, pin_mask);
-+ break;
-+ case GPIO_PERIPH_D:
-+ gpio_writel(chip, PMR0S, pin_mask);
-+ gpio_writel(chip, PMR1S, pin_mask);
-+ break;
-+ default:
-+ printk("%s: unknown function for pin mask %u\n",
-+ chip->name, pin_mask);
-+ goto fail;
-+ }
-+
-+ gpio_writel(chip, PUERS, pin_mask);
-+
-+ gpio_writel(chip, GPERC, pin_mask);
-+ if (!(flags & AT32_GPIOF_PULLUP))
-+ gpio_writel(chip, PUERC, pin_mask);
-+
-+ spin_unlock(&gpio_lock);
-+
-+ return;
-+
-+fail:
-+ dump_stack();
-+}
-+
-+void __init at32_select_gpio(unsigned int pin, unsigned long flags)
-+{
-+ struct atmel_gpio_chip *chip;
-+ unsigned int pin_index = pin & 0x1f;
-+ u32 mask = 1 << pin_index;
-+
-+ chip = pin_to_chip(pin);
-+ if (unlikely(!chip)) {
-+ printk("GPIO: invalid pin %u\n", pin);
-+ goto fail;
-+ }
-+
-+ if (unlikely(test_and_set_bit(pin_index, &chip->pinmux_mask))) {
-+ printk("%s: pin %u is busy\n", chip->name, pin_index);
-+ goto fail;
-+ }
-+
-+ if (flags & AT32_GPIOF_PULLUP)
-+ gpio_writel(chip, PUERS, mask);
-+ else
-+ gpio_writel(chip, PUERC, mask);
-+ if (flags & AT32_GPIOF_MULTIDRV)
-+ gpio_writel(chip, ODMERS, mask);
-+ else
-+ gpio_writel(chip, ODMERC, mask);
-+ if (flags & AT32_GPIOF_DEGLITCH)
-+ gpio_writel(chip, GFERS, mask);
-+ else
-+ gpio_writel(chip, GFERC, mask);
-+
-+ if (flags & AT32_GPIOF_OUTPUT) {
-+ if (flags & AT32_GPIOF_HIGH)
-+ gpio_writel(chip, OVRS, mask);
-+ else
-+ gpio_writel(chip, OVRC, mask);
-+ gpio_writel(chip, ODERS, mask);
-+ } else {
-+ gpio_writel(chip, ODERC, mask);
-+ }
-+
-+ gpio_writel(chip, GPERS, mask);
-+
-+ return;
-+
-+fail:
-+ dump_stack();
-+}
-+
-+/* Reserve a pin, preventing anyone else from changing its configuration. */
-+void __init at32_reserve_pin(unsigned int port, u32 pin_mask)
-+{
-+ struct atmel_gpio_chip *chip;
-+
-+ chip = pin_to_chip(port);
-+ if (unlikely(!chip)) {
-+ printk("GPIO: invalid port %u\n", port);
-+ goto fail;
-+ }
-+
-+ /* Test if any of the requested pins is already muxed */
-+ spin_lock(&gpio_lock);
-+ if (unlikely(pin_mask & chip->pinmux_mask)) {
-+ printk(KERN_WARNING "%s: pin(s) busy (req. 0x%x, busy 0x%x)\n",
-+ chip->name, pin_mask, chip->pinmux_mask & pin_mask);
-+ spin_unlock(&gpio_lock);
-+ goto fail;
-+ }
-+
-+ /* Reserve pins */
-+ chip->pinmux_mask |= pin_mask;
-+ spin_unlock(&gpio_lock);
-+ return;
-+
-+fail:
-+ dump_stack();
-+}
-+
-+/*--------------------------------------------------------------------------*/
-+
-+/* GPIO API */
-+
-+static int get_pin_state(struct gpio_chip *chip, unsigned int offset)
-+{
-+ struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip);
-+
-+ return (gpio_readl(gpio, PVR) >> offset) & 1;
-+}
-+
-+static void set_pin_state(struct gpio_chip *chip, unsigned int offset, int high)
-+{
-+ struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip);
-+ u32 mask = 1 << offset;
-+
-+ if (high)
-+ gpio_writel(gpio, OVRS, mask);
-+ else
-+ gpio_writel(gpio, OVRC, mask);
-+}
-+
-+static int direction_input(struct gpio_chip *chip, unsigned int offset)
-+{
-+ struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip);
-+ u32 mask = 1 << offset;
-+
-+ if (!(gpio_readl(gpio, GPER) & mask))
-+ return -EINVAL;
-+
-+ gpio_writel(gpio, ODERC, mask);
-+ return 0;
-+}
-+
-+static int direction_output(struct gpio_chip *chip, unsigned int offset,
-+ int high)
-+{
-+ struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip);
-+ u32 mask = 1 << offset;
-+
-+ if (!(gpio_readl(gpio, GPER) & mask))
-+ return -EINVAL;
-+
-+ set_pin_state(chip, offset, high);
-+ gpio_writel(gpio, ODERS, mask);
-+ return 0;
-+}
-+
-+/*--------------------------------------------------------------------------*/
-+
-+/* GPIO IRQ support */
-+
-+static void gpio_irq_mask(unsigned irq)
-+{
-+ unsigned int pin = irq_to_gpio(irq);
-+ struct atmel_gpio_chip *chip = &gpio_dev[pin >> 5];
-+
-+ gpio_writel(chip, IERC, 1 << (pin & 0x1f));
-+}
-+
-+static void gpio_irq_unmask(unsigned irq)
-+{
-+ unsigned int pin = irq_to_gpio(irq);
-+ struct atmel_gpio_chip *chip = &gpio_dev[pin >> 5];
-+
-+ gpio_writel(chip, IERS, 1 << (pin & 0x1f));
-+}
-+
-+static int gpio_irq_type(unsigned irq, unsigned type)
-+{
-+ unsigned int pin = irq_to_gpio(irq);
-+ struct atmel_gpio_chip *chip = &gpio_dev[pin >> 5];
-+ u32 mask = 1 << (pin & 0x1f);
-+
-+ switch (type) {
-+ case IRQ_TYPE_EDGE_FALLING:
-+ gpio_writel(chip, IMR0C, mask);
-+ gpio_writel(chip, IMR1S, mask);
-+ break;
-+ case IRQ_TYPE_EDGE_RISING:
-+ gpio_writel(chip, IMR0S, mask);
-+ gpio_writel(chip, IMR1C, mask);
-+ break;
-+ case IRQ_TYPE_NONE:
-+ /* fall through */
-+ case IRQ_TYPE_EDGE_BOTH:
-+ gpio_writel(chip, IMR0C, mask);
-+ gpio_writel(chip, IMR1C, mask);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static struct irq_chip gpio_irqchip = {
-+ .name = "gpio",
-+ .mask = gpio_irq_mask,
-+ .unmask = gpio_irq_unmask,
-+ .set_type = gpio_irq_type,
-+};
-+
-+static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
-+{
-+ struct atmel_gpio_chip *chip = get_irq_chip_data(irq);
-+ unsigned int gpio_irq;
-+
-+ gpio_irq = (unsigned int) get_irq_data(irq);
-+ for (;;) {
-+ u32 ifr;
-+ struct irq_desc *d;
-+
-+ /* ack pending GPIO interrupts */
-+ ifr = gpio_readl(chip, IFR);
-+ if (!ifr)
-+ break;
-+ do {
-+ int pin;
-+
-+ pin = ffs(ifr) - 1;
-+ ifr &= ~(1 << pin);
-+ gpio_writel(chip, IFRC, (1 << pin));
-+
-+ pin += gpio_irq;
-+ d = &irq_desc[pin];
-+
-+ d->handle_irq(pin, d);
-+ } while (ifr);
-+ }
-+}
-+
-+static void __init
-+gpio_irq_setup(struct atmel_gpio_chip *chip, int irq, int gpio_irq)
-+{
-+ unsigned i;
-+
-+ set_irq_chip_data(irq, chip);
-+ set_irq_data(irq, (void *) gpio_irq);
-+
-+ for (i = 0; i < 32; i++, gpio_irq++) {
-+ set_irq_chip_data(gpio_irq, chip);
-+ set_irq_chip_and_handler(gpio_irq, &gpio_irqchip,
-+ handle_simple_irq);
-+ }
-+
-+ set_irq_chained_handler(irq, gpio_irq_handler);
-+}
-+
-+/*--------------------------------------------------------------------------*/
-+
-+#ifdef CONFIG_DEBUG_FS
-+
-+#include <linux/seq_file.h>
-+
-+/*
-+ * This shows more info than the generic gpio dump code:
-+ * pullups, deglitching, open drain drive.
-+ */
-+static void gpio_bank_show(struct seq_file *s, struct gpio_chip *chip)
-+{
-+ struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip);
-+ u32 oder, ovr, puer, pder, gfer, odmer, ier, imr0, imr1;
-+ unsigned int i;
-+ u32 mask;
-+
-+ oder = gpio_readl(gpio, ODER);
-+ ovr = gpio_readl(gpio, OVR);
-+ puer = gpio_readl(gpio, PUER);
-+ pder = gpio_readl(gpio, PDER);
-+ gfer = gpio_readl(gpio, GFER);
-+ odmer = gpio_readl(gpio, ODMER);
-+ ier = gpio_readl(gpio, IER);
-+ imr0 = gpio_readl(gpio, IMR0);
-+ imr1 = gpio_readl(gpio, IMR1);
-+
-+ for (i = 0, mask = 1; i < 32; i++, mask <<= 1) {
-+ const char *label;
-+
-+ label = gpiochip_is_requested(chip, i);
-+ if (!label)
-+ continue;
-+
-+ seq_printf(s, " gpio-%-3d ", chip->base + i);
-+ gpio_decode_pin(s, gpio->bank, i);
-+ seq_printf(s, " (%-12s) %s %s", label,
-+ (oder & mask) ? "out" : "in",
-+ (ovr & mask) ? "hi" : "lo");
-+ if ((puer & mask) && !(pder & mask))
-+ seq_printf(s, " pull-up");
-+ else if (!(puer & mask) && (pder & mask))
-+ seq_printf(s, " pull-down");
-+ else if ((puer & mask) && (pder & mask))
-+ seq_printf(s, " buskeeper");
-+ if (gfer & mask)
-+ seq_printf(s, " deglitch");
-+ if (odmer & mask)
-+ seq_printf(s, " open-drain");
-+ if ((gpio->irq >= 0) && (ier & mask)) {
-+ seq_printf(s, " irq-%d edge-",
-+ gpio_to_irq(chip->base + i));
-+ if (!(imr0 & mask) && !(imr1 & mask))
-+ seq_printf(s, "both");
-+ else if ((imr0 & mask) && !(imr1 & mask))
-+ seq_printf(s, "rising");
-+ else if (!(imr0 & mask) && (imr1 & mask))
-+ seq_printf(s, "falling");
-+ else
-+ seq_printf(s, "INVALID");
-+ }
-+ seq_printf(s, "\n");
-+ }
-+}
-+
-+#else
-+#define gpio_bank_show NULL
-+#endif
-+
-+static int __init gpio_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs;
-+ struct resource *irqs;
-+ int irq = -1;
-+ unsigned int i;
-+
-+ BUG_ON(pdev->id >= 1);
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_err(&pdev->dev, "no mmio resource defined\n");
-+ return -ENXIO;
-+ }
-+ irqs = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+ if (irqs)
-+ irq = irqs->start;
-+
-+ for (i = 0; i < NR_GPIO_BANKS; i++) {
-+ unsigned int gpio_irq_base;
-+ struct atmel_gpio_chip *chip;
-+
-+ chip = &gpio_dev[i];
-+ BUG_ON(!chip->regs);
-+
-+ chip->chip.label = chip->name;
-+ chip->chip.base = i * 32;
-+ chip->chip.ngpio = 32;
-+
-+ chip->chip.direction_input = direction_input;
-+ chip->chip.get = get_pin_state;
-+ chip->chip.direction_output = direction_output;
-+ chip->chip.set = set_pin_state;
-+ chip->chip.dbg_show = gpio_bank_show;
-+
-+ gpiochip_add(&chip->chip);
-+
-+ gpio_irq_base = GPIO_IRQ_BASE + (i * 32);
-+ if (irqs && irq <= irqs->end) {
-+ gpio_irq_setup(chip, irq, gpio_irq_base);
-+ chip->irq = irq;
-+ irq++;
-+ } else {
-+ chip->irq = -1;
-+ }
-+
-+ platform_set_drvdata(pdev, chip);
-+
-+ printk(KERN_DEBUG "%s: base 0x%p", chip->name, chip->regs);
-+ if (chip->irq >= 0)
-+ printk(" irq %d chains %d..%d", irq,
-+ gpio_irq_base, gpio_irq_base + 31);
-+ printk("\n");
-+ }
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gpio_driver = {
-+ .probe = gpio_probe,
-+ .driver = {
-+ .name = "gpio",
-+ },
-+};
-+
-+static int __init gpio_init(void)
-+{
-+ return platform_driver_register(&gpio_driver);
-+}
-+postcore_initcall(gpio_init);
-+
-+void __init at32_gpio_init(struct platform_device *pdev)
-+{
-+ int i;
-+ struct clk *clk;
-+ struct resource *regs;
-+ void __iomem *iomem_base;
-+ struct atmel_gpio_chip *chip;
-+
-+ if (pdev->id > 0) {
-+ dev_err(&pdev->dev, "only one GPIO controller supported\n");
-+ return;
-+ }
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_err(&pdev->dev, "no mmio resource defined\n");
-+ return;
-+ }
-+
-+ clk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(clk)) {
-+ dev_err(&pdev->dev, "no mck clock defined\n");
-+ return;
-+ }
-+ clk_enable(clk);
-+
-+ gpio_clk = clk;
-+
-+ /*
-+ * We may get called too early for ioremap() to work. But we
-+ * know that the GPIO registers are permanently mapped 1:1
-+ */
-+ iomem_base = (void __iomem __force *)regs->start;
-+
-+ for (i = 0; i < NR_GPIO_BANKS; i++) {
-+ chip = &gpio_dev[i];
-+ snprintf(chip->name, sizeof(chip->name), "gpio%d", i);
-+ chip->regs = iomem_base + (i * 0x200);
-+ chip->bank = i;
-+
-+ /* start with irqs disabled and acked */
-+ gpio_writel(chip, IERC, ~0UL);
-+ gpio_writel(chip, IFRC, ~0UL);
-+ }
-+}
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/gpio-v2.h linux-2.6.28.2/arch/avr32/mach-at32ap/gpio-v2.h
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/gpio-v2.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/gpio-v2.h 2009-01-29 08:52:49.000000000 +0100
-@@ -0,0 +1,116 @@
-+/*
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __GPIO_REGS_H__
-+#define __GPIO_REGS_H__
-+
-+/* Register offsets */
-+struct gpio_regs {
-+ u32 GPER;
-+ u32 GPERS;
-+ u32 GPERC;
-+ u32 GPERT;
-+ u32 PMR0;
-+ u32 PMR0S;
-+ u32 PMR0C;
-+ u32 PMR0T;
-+ u32 PMR1;
-+ u32 PMR1S;
-+ u32 PMR1C;
-+ u32 PMR1T;
-+ u32 __reserved0[4];
-+ u32 ODER;
-+ u32 ODERS;
-+ u32 ODERC;
-+ u32 ODERT;
-+ u32 OVR;
-+ u32 OVRS;
-+ u32 OVRC;
-+ u32 OVRT;
-+ u32 PVR;
-+ u32 __reserved_PVRS;
-+ u32 __reserved_PVRC;
-+ u32 __reserved_PVRT;
-+ u32 PUER;
-+ u32 PUERS;
-+ u32 PUERC;
-+ u32 PUERT;
-+ u32 PDER;
-+ u32 PDERS;
-+ u32 PDERC;
-+ u32 PDERT;
-+ u32 IER;
-+ u32 IERS;
-+ u32 IERC;
-+ u32 IERT;
-+ u32 IMR0;
-+ u32 IMR0S;
-+ u32 IMR0C;
-+ u32 IMR0T;
-+ u32 IMR1;
-+ u32 IMR1S;
-+ u32 IMR1C;
-+ u32 IMR1T;
-+ u32 GFER;
-+ u32 GFERS;
-+ u32 GFERC;
-+ u32 GFERT;
-+ u32 IFR;
-+ u32 __reserved_IFRS;
-+ u32 IFRC;
-+ u32 __reserved_IFRT;
-+ u32 ODMER;
-+ u32 ODMERS;
-+ u32 ODMERC;
-+ u32 ODMERT;
-+ u32 __reserved1[4];
-+ u32 ODCR0;
-+ u32 ODCR0S;
-+ u32 ODCR0C;
-+ u32 ODCR0T;
-+ u32 ODCR1;
-+ u32 ODCR1S;
-+ u32 ODCR1C;
-+ u32 ODCR1T;
-+ u32 __reserved2[4];
-+ u32 OSRR0;
-+ u32 OSRR0S;
-+ u32 OSRR0C;
-+ u32 OSRR0T;
-+ u32 __reserved3[8];
-+ u32 STER;
-+ u32 STERS;
-+ u32 STERC;
-+ u32 STERT;
-+ u32 __reserved4[35];
-+ u32 VERSION;
-+};
-+
-+/* Register access macros */
-+#define __gpio_regs(bank) ((struct gpio_regs __iomem *)(bank)->regs)
-+#define gpio_readl(bank, reg) \
-+ __raw_readl(&__gpio_regs(bank)->reg)
-+#define gpio_writel(bank, reg, value) \
-+ __raw_writel(value, &__gpio_regs(bank)->reg)
-+
-+void at32_gpio_init(struct platform_device *pdev);
-+
-+#endif /* __GPIO_REGS_H__ */
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/hmatrix.c linux-2.6.28.2/arch/avr32/mach-at32ap/hmatrix.c
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/hmatrix.c 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/hmatrix.c 2009-01-29 08:52:49.000000000 +0100
-@@ -54,6 +54,81 @@
- }
-
- /**
-+ * hmatrix_set_default_master - set default master on a given slave
-+ * @slave: HSB slave interface ID
-+ * @master: HSB master interface ID
-+ */
-+void hmatrix_set_default_master(unsigned int slave, unsigned int master)
-+{
-+ u32 value;
-+ unsigned int reg;
-+
-+ WARN_ON(slave > HMATRIX_MAX_SLAVE
-+ || master > HMATRIX_MASTER_LAST);
-+
-+ reg = HMATRIX_SCFG(slave);
-+
-+ clk_enable(&at32_hmatrix_clk);
-+ value = __hmatrix_read_reg(reg);
-+ value &= ~(HMATRIX_SCFG_FIXED_DEFMSTR(HMATRIX_MAX_SLAVE)
-+ | HMATRIX_SCFG_DEFMSTR_MASK);
-+
-+ switch (master) {
-+ case HMATRIX_MASTER_NONE:
-+ value |= HMATRIX_SCFG_DEFMSTR_NONE;
-+ break;
-+ case HMATRIX_MASTER_LAST:
-+ value |= HMATRIX_SCFG_DEFMSTR_LAST;
-+ break;
-+ default:
-+ value |= HMATRIX_SCFG_DEFMSTR_FIXED;
-+ value |= HMATRIX_SCFG_FIXED_DEFMSTR(master);
-+ break;
-+ }
-+
-+ __hmatrix_write_reg(reg, value);
-+ __hmatrix_read_reg(reg);
-+ clk_disable(&at32_hmatrix_clk);
-+}
-+
-+/**
-+ * hmatrix_set_priority - set the priority of a master on a given slave
-+ * @slave: HSB slave interface ID
-+ * @master: HSB master interface ID
-+ * @priority: Priority of @master when competing for access to @slave.
-+ *
-+ * Note that this is currently broken -- we need some way to enable
-+ * fixed-priority arbitration, and that happens to be broken on AP7000
-+ * rev C.
-+ */
-+void hmatrix_set_priority(unsigned int slave, unsigned int master,
-+ unsigned int priority)
-+{
-+ u32 value;
-+ unsigned int reg;
-+
-+ WARN_ON(slave > HMATRIX_MAX_SLAVE
-+ || master > HMATRIX_MAX_MASTER
-+ || priority > HMATRIX_MAX_PRIO);
-+
-+ clk_enable(&at32_hmatrix_clk);
-+ if (master < 8) {
-+ reg = HMATRIX_PRAS(slave);
-+ value = __hmatrix_read_reg(reg);
-+ value &= ~HMATRIX_PRAS_PRIO(master, HMATRIX_MAX_PRIO);
-+ value |= HMATRIX_PRAS_PRIO(master, priority);
-+ } else {
-+ reg = HMATRIX_PRBS(slave);
-+ value = __hmatrix_read_reg(reg);
-+ value &= ~HMATRIX_PRBS_PRIO(master, HMATRIX_MAX_PRIO);
-+ value |= HMATRIX_PRBS_PRIO(master, priority);
-+ }
-+ __hmatrix_write_reg(reg, value);
-+ __hmatrix_read_reg(reg);
-+ clk_disable(&at32_hmatrix_clk);
-+}
-+
-+/**
- * hmatrix_sfr_set_bits - set bits in a slave's Special Function Register
- * @slave_id: operate on the SFR belonging to this slave
- * @mask: mask of bits to be set in the SFR
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/hsmc.c linux-2.6.28.2/arch/avr32/mach-at32ap/hsmc.c
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/hsmc.c 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/hsmc.c 2009-01-29 08:52:49.000000000 +0100
-@@ -229,10 +229,8 @@
- if (IS_ERR(pclk))
- return PTR_ERR(pclk);
- mck = clk_get(&pdev->dev, "mck");
-- if (IS_ERR(mck)) {
-- ret = PTR_ERR(mck);
-- goto out_put_pclk;
-- }
-+ if (IS_ERR(mck))
-+ mck = pclk;
-
- ret = -ENOMEM;
- hsmc = kzalloc(sizeof(struct hsmc), GFP_KERNEL);
-@@ -260,8 +258,8 @@
- clk_disable(pclk);
- kfree(hsmc);
- out_put_clocks:
-- clk_put(mck);
--out_put_pclk:
-+ if (mck != pclk)
-+ clk_put(mck);
- clk_put(pclk);
- hsmc = NULL;
- return ret;
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/include/mach/at32ap700x.h linux-2.6.28.2/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/include/mach/at32ap700x.h 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/include/mach/at32ap700x.h 2009-01-29 08:52:49.000000000 +0100
-@@ -211,4 +211,135 @@
-
- #define ATMEL_LCDC_ALT_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_15B_DATA)
-
-+/* Bitmask for all EBI data (D16..D31) pins on port E */
-+#define ATMEL_EBI_PE_DATA_ALL (0x0000FFFF)
-+
-+/* LCDC on port C */
-+#define ATMEL_LCDC_PC_CC (1ULL << 19)
-+#define ATMEL_LCDC_PC_HSYNC (1ULL << 20)
-+#define ATMEL_LCDC_PC_PCLK (1ULL << 21)
-+#define ATMEL_LCDC_PC_VSYNC (1ULL << 22)
-+#define ATMEL_LCDC_PC_DVAL (1ULL << 23)
-+#define ATMEL_LCDC_PC_MODE (1ULL << 24)
-+#define ATMEL_LCDC_PC_PWR (1ULL << 25)
-+#define ATMEL_LCDC_PC_DATA0 (1ULL << 26)
-+#define ATMEL_LCDC_PC_DATA1 (1ULL << 27)
-+#define ATMEL_LCDC_PC_DATA2 (1ULL << 28)
-+#define ATMEL_LCDC_PC_DATA3 (1ULL << 29)
-+#define ATMEL_LCDC_PC_DATA4 (1ULL << 30)
-+#define ATMEL_LCDC_PC_DATA5 (1ULL << 31)
-+
-+/* LCDC on port D */
-+#define ATMEL_LCDC_PD_DATA6 (1ULL << 0)
-+#define ATMEL_LCDC_PD_DATA7 (1ULL << 1)
-+#define ATMEL_LCDC_PD_DATA8 (1ULL << 2)
-+#define ATMEL_LCDC_PD_DATA9 (1ULL << 3)
-+#define ATMEL_LCDC_PD_DATA10 (1ULL << 4)
-+#define ATMEL_LCDC_PD_DATA11 (1ULL << 5)
-+#define ATMEL_LCDC_PD_DATA12 (1ULL << 6)
-+#define ATMEL_LCDC_PD_DATA13 (1ULL << 7)
-+#define ATMEL_LCDC_PD_DATA14 (1ULL << 8)
-+#define ATMEL_LCDC_PD_DATA15 (1ULL << 9)
-+#define ATMEL_LCDC_PD_DATA16 (1ULL << 10)
-+#define ATMEL_LCDC_PD_DATA17 (1ULL << 11)
-+#define ATMEL_LCDC_PD_DATA18 (1ULL << 12)
-+#define ATMEL_LCDC_PD_DATA19 (1ULL << 13)
-+#define ATMEL_LCDC_PD_DATA20 (1ULL << 14)
-+#define ATMEL_LCDC_PD_DATA21 (1ULL << 15)
-+#define ATMEL_LCDC_PD_DATA22 (1ULL << 16)
-+#define ATMEL_LCDC_PD_DATA23 (1ULL << 17)
-+
-+/* LCDC on port E */
-+#define ATMEL_LCDC_PE_CC (1ULL << (32 + 0))
-+#define ATMEL_LCDC_PE_DVAL (1ULL << (32 + 1))
-+#define ATMEL_LCDC_PE_MODE (1ULL << (32 + 2))
-+#define ATMEL_LCDC_PE_DATA0 (1ULL << (32 + 3))
-+#define ATMEL_LCDC_PE_DATA1 (1ULL << (32 + 4))
-+#define ATMEL_LCDC_PE_DATA2 (1ULL << (32 + 5))
-+#define ATMEL_LCDC_PE_DATA3 (1ULL << (32 + 6))
-+#define ATMEL_LCDC_PE_DATA4 (1ULL << (32 + 7))
-+#define ATMEL_LCDC_PE_DATA8 (1ULL << (32 + 8))
-+#define ATMEL_LCDC_PE_DATA9 (1ULL << (32 + 9))
-+#define ATMEL_LCDC_PE_DATA10 (1ULL << (32 + 10))
-+#define ATMEL_LCDC_PE_DATA11 (1ULL << (32 + 11))
-+#define ATMEL_LCDC_PE_DATA12 (1ULL << (32 + 12))
-+#define ATMEL_LCDC_PE_DATA16 (1ULL << (32 + 13))
-+#define ATMEL_LCDC_PE_DATA17 (1ULL << (32 + 14))
-+#define ATMEL_LCDC_PE_DATA18 (1ULL << (32 + 15))
-+#define ATMEL_LCDC_PE_DATA19 (1ULL << (32 + 16))
-+#define ATMEL_LCDC_PE_DATA20 (1ULL << (32 + 17))
-+#define ATMEL_LCDC_PE_DATA21 (1ULL << (32 + 18))
-+
-+
-+#define ATMEL_LCDC(PORT, PIN) (ATMEL_LCDC_##PORT##_##PIN)
-+
-+
-+#define ATMEL_LCDC_PRI_24B_DATA ( \
-+ ATMEL_LCDC(PC, DATA0) | ATMEL_LCDC(PC, DATA1) | \
-+ ATMEL_LCDC(PC, DATA2) | ATMEL_LCDC(PC, DATA3) | \
-+ ATMEL_LCDC(PC, DATA4) | ATMEL_LCDC(PC, DATA5) | \
-+ ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \
-+ ATMEL_LCDC(PD, DATA8) | ATMEL_LCDC(PD, DATA9) | \
-+ ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) | \
-+ ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA13) | \
-+ ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \
-+ ATMEL_LCDC(PD, DATA16) | ATMEL_LCDC(PD, DATA17) | \
-+ ATMEL_LCDC(PD, DATA18) | ATMEL_LCDC(PD, DATA19) | \
-+ ATMEL_LCDC(PD, DATA20) | ATMEL_LCDC(PD, DATA21) | \
-+ ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23))
-+
-+#define ATMEL_LCDC_ALT_24B_DATA ( \
-+ ATMEL_LCDC(PE, DATA0) | ATMEL_LCDC(PE, DATA1) | \
-+ ATMEL_LCDC(PE, DATA2) | ATMEL_LCDC(PE, DATA3) | \
-+ ATMEL_LCDC(PE, DATA4) | ATMEL_LCDC(PC, DATA5) | \
-+ ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \
-+ ATMEL_LCDC(PE, DATA8) | ATMEL_LCDC(PE, DATA9) | \
-+ ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) | \
-+ ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PD, DATA13) | \
-+ ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \
-+ ATMEL_LCDC(PE, DATA16) | ATMEL_LCDC(PE, DATA17) | \
-+ ATMEL_LCDC(PE, DATA18) | ATMEL_LCDC(PE, DATA19) | \
-+ ATMEL_LCDC(PE, DATA20) | ATMEL_LCDC(PE, DATA21) | \
-+ ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23))
-+
-+#define ATMEL_LCDC_PRI_15B_DATA ( \
-+ ATMEL_LCDC(PC, DATA0) | ATMEL_LCDC(PC, DATA1) | \
-+ ATMEL_LCDC(PC, DATA2) | ATMEL_LCDC(PC, DATA3) | \
-+ ATMEL_LCDC(PC, DATA4) | ATMEL_LCDC(PC, DATA5) | \
-+ ATMEL_LCDC(PD, DATA8) | ATMEL_LCDC(PD, DATA9) | \
-+ ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) | \
-+ ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA16) | \
-+ ATMEL_LCDC(PD, DATA17) | ATMEL_LCDC(PD, DATA18) | \
-+ ATMEL_LCDC(PD, DATA19) | ATMEL_LCDC(PD, DATA20))
-+
-+#define ATMEL_LCDC_ALT_15B_DATA ( \
-+ ATMEL_LCDC(PE, DATA0) | ATMEL_LCDC(PE, DATA1) | \
-+ ATMEL_LCDC(PE, DATA2) | ATMEL_LCDC(PE, DATA3) | \
-+ ATMEL_LCDC(PE, DATA4) | ATMEL_LCDC(PC, DATA5) | \
-+ ATMEL_LCDC(PE, DATA8) | ATMEL_LCDC(PE, DATA9) | \
-+ ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) | \
-+ ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PE, DATA16) | \
-+ ATMEL_LCDC(PE, DATA17) | ATMEL_LCDC(PE, DATA18) | \
-+ ATMEL_LCDC(PE, DATA19) | ATMEL_LCDC(PE, DATA20))
-+
-+#define ATMEL_LCDC_PRI_CONTROL ( \
-+ ATMEL_LCDC(PC, CC) | ATMEL_LCDC(PC, DVAL) | \
-+ ATMEL_LCDC(PC, MODE) | ATMEL_LCDC(PC, PWR))
-+
-+#define ATMEL_LCDC_ALT_CONTROL ( \
-+ ATMEL_LCDC(PE, CC) | ATMEL_LCDC(PE, DVAL) | \
-+ ATMEL_LCDC(PE, MODE) | ATMEL_LCDC(PC, PWR))
-+
-+#define ATMEL_LCDC_CONTROL ( \
-+ ATMEL_LCDC(PC, HSYNC) | ATMEL_LCDC(PC, VSYNC) | \
-+ ATMEL_LCDC(PC, PCLK))
-+
-+#define ATMEL_LCDC_PRI_24BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_24B_DATA)
-+
-+#define ATMEL_LCDC_ALT_24BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_24B_DATA)
-+
-+#define ATMEL_LCDC_PRI_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_15B_DATA)
-+
-+#define ATMEL_LCDC_ALT_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_15B_DATA)
-+
- #endif /* __ASM_ARCH_AT32AP700X_H__ */
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/include/mach/at32ap720x.h linux-2.6.28.2/arch/avr32/mach-at32ap/include/mach/at32ap720x.h
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/include/mach/at32ap720x.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/include/mach/at32ap720x.h 2009-01-29 08:52:49.000000000 +0100
-@@ -0,0 +1,105 @@
-+/*
-+ * Pin definitions for AT32AP7200
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_ARCH_AT32AP7200_H__
-+#define __ASM_ARCH_AT32AP7200_H__
-+
-+#define GPIO_PERIPH_A 0x00
-+#define GPIO_PERIPH_B 0x01
-+#define GPIO_PERIPH_C 0x02
-+#define GPIO_PERIPH_D 0x03
-+
-+#define NR_GPIO_BANKS 8
-+
-+/*
-+ * Pin numbers identifying specific GPIO pins on the chip. They can
-+ * also be converted to IRQ numbers by passing them through
-+ * gpio_to_irq().
-+ */
-+#define GPIO_BASE (0)
-+
-+#define GPIO_PA_BASE (GPIO_BASE + 0 * 32)
-+#define GPIO_PB_BASE (GPIO_BASE + 1 * 32)
-+#define GPIO_PC_BASE (GPIO_BASE + 2 * 32)
-+#define GPIO_PD_BASE (GPIO_BASE + 3 * 32)
-+#define GPIO_PE_BASE (GPIO_BASE + 4 * 32)
-+#define GPIO_PF_BASE (GPIO_BASE + 5 * 32)
-+#define GPIO_PX_BASE (GPIO_BASE + 6 * 32)
-+
-+#define GPIO_PIN_PA(N) (GPIO_PA_BASE + (N))
-+#define GPIO_PIN_PB(N) (GPIO_PB_BASE + (N))
-+#define GPIO_PIN_PC(N) (GPIO_PC_BASE + (N))
-+#define GPIO_PIN_PD(N) (GPIO_PD_BASE + (N))
-+#define GPIO_PIN_PE(N) (GPIO_PE_BASE + (N))
-+#define GPIO_PIN_PF(N) (GPIO_PF_BASE + (N))
-+#define GPIO_PIN_PX(N) (GPIO_PX_BASE + (N))
-+
-+#define gpio_decode_pin(s, bank, offset) \
-+ do { \
-+ switch (bank) { \
-+ case 7: \
-+ offset += 32; \
-+ /* fall through */ \
-+ case 6: \
-+ seq_printf(s, "PX%-2u", offset); \
-+ break; \
-+ default: \
-+ seq_printf(s, "P%c%-2u", bank + 'A', offset); \
-+ break; \
-+ } \
-+ } while (0)
-+
-+/* HSB master IDs */
-+#define HMATRIX_MASTER_CPU_ICACHE 0
-+#define HMATRIX_MASTER_CPU_DCACHE 1
-+#define HMATRIX_MASTER_PDCA 2
-+#define HMATRIX_MASTER_LCDC 4
-+#define HMATRIX_MASTER_MPOP_IBI 5
-+#define HMATRIX_MASTER_MPOP_OBI 6
-+#define HMATRIX_MASTER_MPOP_OM 7
-+#define HMATRIX_MASTER_DMACA_M0 8
-+#define HMATRIX_MASTER_DMACA_M1 9
-+#define HMATRIX_MASTER_USBB 10
-+#define HMATRIX_MASTER_USBH_EHCI 11
-+#define HMATRIX_MASTER_USBH_OHCI 12
-+#define HMATRIX_MASTER_MACB 13
-+
-+/* HSB slave IDs */
-+#define HMATRIX_SLAVE_BOOTROM 0
-+#define HMATRIX_SLAVE_PBA 1
-+#define HMATRIX_SLAVE_PBB 2
-+#define HMATRIX_SLAVE_PBC 3
-+#define HMATRIX_SLAVE_SRAM0 4
-+#define HMATRIX_SLAVE_SRAM1 5
-+#define HMATRIX_SLAVE_EBI 6
-+#define HMATRIX_SLAVE_LCDC 7
-+#define HMATRIX_SLAVE_MPOP 8
-+#define HMATRIX_SLAVE_DMACA 9
-+#define HMATRIX_SLAVE_USBB 10
-+#define HMATRIX_SLAVE_EHCI 11
-+#define HMATRIX_SLAVE_OHCI 12
-+
-+/* Bits in HMATRIX SFR6 (EBI) */
-+#define HMATRIX_EBI_SDRAM_ENABLE (1 << 1)
-+#define HMATRIX_EBI_NAND_ENABLE (1 << 3)
-+#define HMATRIX_EBI_CF0_ENABLE (1 << 4)
-+#define HMATRIX_EBI_CF1_ENABLE (1 << 5)
-+
-+/*
-+ * Base addresses of controllers that may be accessed early by
-+ * platform code.
-+ */
-+#define GPIO_HW_BASE 0xffd02000
-+#define INTC_BASE 0xffd00000
-+#define PM_BASE 0xffd00400
-+#define SDC_BASE 0xffd00800
-+#define SDRAMC_BASE 0xffe04800
-+#define HMATRIX_BASE 0xffe05000
-+
-+#endif /* __ASM_ARCH_AT32AP7200_H__ */
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/include/mach/chip.h linux-2.6.28.2/arch/avr32/mach-at32ap/include/mach/chip.h
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/include/mach/chip.h 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/include/mach/chip.h 2009-01-29 08:52:49.000000000 +0100
-@@ -12,6 +12,8 @@
-
- #if defined(CONFIG_CPU_AT32AP700X)
- # include <mach/at32ap700x.h>
-+#elif defined(CONFIG_CPU_AT32AP720X)
-+# include <mach/at32ap720x.h>
- #else
- # error Unknown chip type selected
- #endif
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/include/mach/cpu.h linux-2.6.28.2/arch/avr32/mach-at32ap/include/mach/cpu.h
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/include/mach/cpu.h 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/include/mach/cpu.h 2009-01-29 08:52:49.000000000 +0100
-@@ -20,6 +20,19 @@
- # define cpu_is_at32ap7000() (0)
- #endif
-
-+#ifdef CONFIG_CPU_AT32AP720X
-+# define cpu_is_at32ap7200() (1)
-+#else
-+# define cpu_is_at32ap7200() (0)
-+#endif
-+
-+/*
-+ * Unfortunately, only AP700x has a non-broken COUNT/COMPARE
-+ * implementation. Other chips need to use different timers. The good
-+ * news is that these timers are usually better anyway.
-+ */
-+#define cpu_has_working_compare() (cpu_is_at32ap7000())
-+
- /*
- * Since this is AVR32, we will never run on any AT91 CPU. But these
- * definitions may reduce clutter in common drivers.
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/include/mach/hmatrix.h linux-2.6.28.2/arch/avr32/mach-at32ap/include/mach/hmatrix.h
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/include/mach/hmatrix.h 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/include/mach/hmatrix.h 2009-01-29 08:52:49.000000000 +0100
-@@ -15,6 +15,9 @@
- void hmatrix_write_reg(unsigned long offset, u32 value);
- u32 hmatrix_read_reg(unsigned long offset);
-
-+void hmatrix_set_default_master(unsigned int slave, unsigned int master);
-+void hmatrix_set_priority(unsigned int slave, unsigned int master,
-+ unsigned int priority);
- void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask);
- void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask);
-
-@@ -33,6 +36,7 @@
- # define HMATRIX_SCFG_DEFMSTR_NONE ( 0 << 16) /* No default master */
- # define HMATRIX_SCFG_DEFMSTR_LAST ( 1 << 16) /* Last def master */
- # define HMATRIX_SCFG_DEFMSTR_FIXED ( 2 << 16) /* Fixed def master */
-+# define HMATRIX_SCFG_DEFMSTR_MASK ( 3 << 16)
- # define HMATRIX_SCFG_FIXED_DEFMSTR(m) ((m) << 18) /* Fixed master ID */
- # define HMATRIX_SCFG_ARBT_ROUND_ROBIN ( 0 << 24) /* RR arbitration */
- # define HMATRIX_SCFG_ARBT_FIXED_PRIO ( 1 << 24) /* Fixed priority */
-@@ -52,4 +56,12 @@
- /* Special Function Register. Bit definitions are chip-specific */
- #define HMATRIX_SFR(s) (0x0110 + 4 * (s))
-
-+#define HMATRIX_MAX_SLAVE 15
-+#define HMATRIX_MAX_MASTER 15
-+#define HMATRIX_MAX_PRIO 15
-+
-+/* Special master IDs for use with hmatrix_set_default_master() */
-+#define HMATRIX_MASTER_NONE 16 /* No default master */
-+#define HMATRIX_MASTER_LAST 17 /* Last master stays connected */
-+
- #endif /* __HMATRIX_H */
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/include/mach/init.h linux-2.6.28.2/arch/avr32/mach-at32ap/include/mach/init.h
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/include/mach/init.h 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/include/mach/init.h 2009-01-29 08:52:49.000000000 +0100
-@@ -15,4 +15,10 @@
-
- void at32_setup_serial_console(unsigned int usart_id);
-
-+/*
-+ * Called from time_init() when a broken COUNT/COMPARE implementation
-+ * is detected.
-+ */
-+void platform_time_init(void);
-+
- #endif /* __ASM_AVR32_AT32AP_INIT_H__ */
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/include/mach/irq.h linux-2.6.28.2/arch/avr32/mach-at32ap/include/mach/irq.h
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/include/mach/irq.h 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/include/mach/irq.h 2009-01-29 08:52:49.000000000 +0100
-@@ -6,7 +6,7 @@
- #define AT32_EXTINT(n) (EIM_IRQ_BASE + (n))
-
- #define GPIO_IRQ_BASE (EIM_IRQ_BASE + NR_EIM_IRQS)
--#define NR_GPIO_CTLR (5 /*internal*/ + 1 /*external*/)
-+#define NR_GPIO_CTLR (8 /*internal*/ + 1 /*external*/)
- #define NR_GPIO_IRQS (NR_GPIO_CTLR * 32)
-
- #define NR_IRQS (GPIO_IRQ_BASE + NR_GPIO_IRQS)
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/include/mach/pm.h linux-2.6.28.2/arch/avr32/mach-at32ap/include/mach/pm.h
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/include/mach/pm.h 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/include/mach/pm.h 2009-01-29 08:52:49.000000000 +0100
-@@ -11,13 +11,17 @@
- #define __ASM_AVR32_ARCH_PM_H
-
- /* Possible arguments to the "sleep" instruction */
--#define CPU_SLEEP_IDLE 0
--#define CPU_SLEEP_FROZEN 1
--#define CPU_SLEEP_STANDBY 2
--#define CPU_SLEEP_STOP 3
--#define CPU_SLEEP_STATIC 5
-+#define CPU_SLEEP_IDLE 0x00
-+#define CPU_SLEEP_FROZEN 0x01
-+#define CPU_SLEEP_STANDBY 0x02
-+#define CPU_SLEEP_STOP 0x03
-+#define CPU_SLEEP_DEEPSTOP 0x04 /* Not valid on AP700x */
-+#define CPU_SLEEP_STATIC 0x05
-+#define CPU_SLEEP_SHUTDOWN 0x06 /* Not valid on AP700x */
-+#define CPU_SLEEP_UNMASK_IRQ 0x80 /* Not valid on AP700x */
-
- #ifndef __ASSEMBLY__
-+#if defined(CONFIG_CPU_AT32AP700X)
- extern void cpu_enter_idle(void);
- extern void cpu_enter_standby(unsigned long sdramc_base);
-
-@@ -37,15 +41,57 @@
- {
- /*
- * If we're using the COUNT and COMPARE registers for
-- * timekeeping, we can't use the IDLE state.
-+ * timekeeping on AP7000, we can't use the IDLE state.
- */
- if (disable_idle_sleep)
- cpu_relax();
- else
- cpu_enter_idle();
- }
-+#else
-+static inline void cpu_disable_idle_sleep(void)
-+{
-+
-+}
-+
-+static inline void cpu_enable_idle_sleep(void)
-+{
-+
-+}
-+
-+static inline void cpu_enter_idle(void)
-+{
-+ /* Enable interrupts and sleep */
-+ asm volatile("sleep %0"
-+ :
-+ : "i"(CPU_SLEEP_IDLE | CPU_SLEEP_UNMASK_IRQ)
-+ : "memory");
-+}
-+
-+static inline void cpu_idle_sleep(void)
-+{
-+ local_irq_disable();
-+ if (!test_thread_flag(TIF_NEED_RESCHED))
-+ cpu_enter_idle();
-+ local_irq_enable();
-+}
-+#endif
-
- void intc_set_suspend_handler(unsigned long offset);
-+
-+extern unsigned long at32_get_reset_cause(void);
-+
- #endif
-
-+#define AT32_RCAUSE_POR (1 << 0) /* Power-On Reset */
-+#define AT32_RCAUSE_BOD (1 << 1) /* Brown-Out Detected */
-+#define AT32_RCAUSE_EXT (1 << 2) /* External Reset */
-+#define AT32_RCAUSE_WDT (1 << 3) /* Watchdog Timeout */
-+#define AT32_RCAUSE_JTAG (1 << 4) /* JTAG Reset */
-+#define AT32_RCAUSE_NTAE (1 << 5) /* NanoTrace Access Error */
-+#define AT32_RCAUSE_SLEEP (1 << 6) /* Shutdown or Static mode */
-+#define AT32_RCAUSE_CPUERR (1 << 7) /* CPU Error */
-+#define AT32_RCAUSE_OCDRST (1 << 8) /* OCD Reset */
-+#define AT32_RCAUSE_JTAGHARD (1 << 9) /* JTAG Hard Reset */
-+
- #endif /* __ASM_AVR32_ARCH_PM_H */
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/Makefile linux-2.6.28.2/arch/avr32/mach-at32ap/Makefile
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/Makefile 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/Makefile 2009-01-29 08:52:49.000000000 +0100
-@@ -1,9 +1,14 @@
--obj-y += pdc.o clock.o intc.o extint.o pio.o hsmc.o
-+obj-y += pdc.o clock.o intc.o extint.o hsmc.o
- obj-y += hmatrix.o
--obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o
-+obj-$(CONFIG_PORTMUX_PIO) += pio.o
-+obj-$(CONFIG_PORTMUX_GPIO_V2) += gpio-v2.o
-+obj-$(CONFIG_TIMER_AST) += timer-ast.o
- obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
- obj-$(CONFIG_PM) += pm.o
-
-+obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o
-+obj-$(CONFIG_CPU_AT32AP720X) += at32ap720x.o pm-at32ap720x.o
-+
- ifeq ($(CONFIG_PM_DEBUG),y)
- CFLAGS_pm.o += -DDEBUG
- endif
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/pm-at32ap700x.S linux-2.6.28.2/arch/avr32/mach-at32ap/pm-at32ap700x.S
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/pm-at32ap700x.S 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/pm-at32ap700x.S 2009-01-29 08:52:50.000000000 +0100
-@@ -12,12 +12,9 @@
- #include <asm/thread_info.h>
- #include <mach/pm.h>
-
--#include "pm.h"
-+#include "pm-v1.h"
- #include "sdramc.h"
-
--/* Same as 0xfff00000 but fits in a 21 bit signed immediate */
--#define PM_BASE -0x100000
--
- .section .bss, "wa", @nobits
- .global disable_idle_sleep
- .type disable_idle_sleep, @object
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/pm-at32ap720x.S linux-2.6.28.2/arch/avr32/mach-at32ap/pm-at32ap720x.S
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/pm-at32ap720x.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/pm-at32ap720x.S 2009-01-29 08:52:50.000000000 +0100
-@@ -0,0 +1,110 @@
-+/*
-+ * Low-level Power Management code.
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <asm/asm.h>
-+#include <asm/asm-offsets.h>
-+#include <asm/thread_info.h>
-+#include <mach/pm.h>
-+
-+#include "pm-v3.h"
-+#include "sdramc.h"
-+
-+#ifdef CONFIG_PM
-+ .section .init.text, "ax", @progbits
-+
-+ .global pm_exception
-+ .type pm_exception, @function
-+pm_exception:
-+ /*
-+ * Exceptions are masked when we switch to this handler, so
-+ * we'll only get "unrecoverable" exceptions (offset 0.)
-+ */
-+ sub r12, pc, . - .Lpanic_msg
-+ lddpc pc, .Lpanic_addr
-+
-+ .align 2
-+.Lpanic_addr:
-+ .long panic
-+.Lpanic_msg:
-+ .asciz "Unrecoverable exception during suspend\n"
-+ .size pm_exception, . - pm_exception
-+
-+ .global pm_irq0
-+ .type pm_irq0, @function
-+pm_irq0:
-+ /* Disable interrupts and return after the sleep instruction */
-+ mfsr r9, SYSREG_RSR_INT0
-+ mtsr SYSREG_RAR_INT0, r8
-+ sbr r9, SYSREG_GM_OFFSET
-+ mtsr SYSREG_RSR_INT0, r9
-+ rete
-+
-+ /*
-+ * void cpu_enter_standby(unsigned long sdramc_base)
-+ *
-+ * Enter PM_SUSPEND_STANDBY mode. At this point, all drivers
-+ * are suspended and interrupts are disabled. Interrupts
-+ * marked as 'wakeup' event sources may still come along and
-+ * get us out of here.
-+ *
-+ * The SDRAM will be put into self-refresh mode (which does
-+ * not require a clock from the CPU), and the CPU will be put
-+ * into "frozen" mode (HSB bus stopped). The SDRAM controller
-+ * will automatically bring the SDRAM into normal mode on the
-+ * first access, and the power manager will automatically
-+ * start the HSB and CPU clocks upon a wakeup event.
-+ */
-+ .global pm_standby
-+ .type pm_standby, @function
-+pm_standby:
-+ /*
-+ * interrupts are already masked at this point, and EVBA
-+ * points to pm_exception above.
-+ */
-+ ld.w r10, r12[SDRAMC_LPR]
-+ sub r8, pc, . - 1f /* return address for irq handler */
-+ mov r11, SDRAMC_LPR_LPCB_SELF_RFR
-+ bfins r10, r11, 0, 2 /* LPCB <- self Refresh */
-+ sync 0 /* flush write buffer */
-+ st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */
-+ ld.w r11, r12[SDRAMC_LPR]
-+ sleep CPU_SLEEP_FROZEN | CPU_SLEEP_UNMASK_IRQ
-+1: mask_interrupts
-+ retal r12
-+ .size pm_standby, . - pm_standby
-+
-+ .global pm_suspend_to_ram
-+ .type pm_suspend_to_ram, @function
-+pm_suspend_to_ram:
-+ /*
-+ * interrupts are already masked at this point, and EVBA
-+ * points to pm_exception above.
-+ */
-+ mov r11, 0
-+ cache r11[2], 8 /* clean all dcache lines */
-+ sync 0 /* flush write buffer */
-+ ld.w r10, r12[SDRAMC_LPR]
-+ sub r8, pc, . - 1f /* return address for irq handler */
-+ mov r11, SDRAMC_LPR_LPCB_SELF_RFR
-+ bfins r10, r11, 0, 2 /* LPCB <- self refresh */
-+ st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */
-+ ld.w r11, r12[SDRAMC_LPR]
-+
-+ sleep CPU_SLEEP_STOP | CPU_SLEEP_UNMASK_IRQ
-+1: mask_interrupts
-+
-+ retal r12
-+ .size pm_suspend_to_ram, . - pm_suspend_to_ram
-+
-+ .global pm_sram_end
-+ .type pm_sram_end, @function
-+pm_sram_end:
-+ .size pm_sram_end, 0
-+
-+#endif /* CONFIG_PM */
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/pm.h linux-2.6.28.2/arch/avr32/mach-at32ap/pm.h
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/pm.h 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/pm.h 1970-01-01 01:00:00.000000000 +0100
-@@ -1,112 +0,0 @@
--/*
-- * Register definitions for the Power Manager (PM)
-- */
--#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
--#define __ARCH_AVR32_MACH_AT32AP_PM_H__
--
--/* PM register offsets */
--#define PM_MCCTRL 0x0000
--#define PM_CKSEL 0x0004
--#define PM_CPU_MASK 0x0008
--#define PM_HSB_MASK 0x000c
--#define PM_PBA_MASK 0x0010
--#define PM_PBB_MASK 0x0014
--#define PM_PLL0 0x0020
--#define PM_PLL1 0x0024
--#define PM_IER 0x0040
--#define PM_IDR 0x0044
--#define PM_IMR 0x0048
--#define PM_ISR 0x004c
--#define PM_ICR 0x0050
--#define PM_GCCTRL(x) (0x0060 + 4 * (x))
--#define PM_RCAUSE 0x00c0
--
--/* Bitfields in CKSEL */
--#define PM_CPUSEL_OFFSET 0
--#define PM_CPUSEL_SIZE 3
--#define PM_CPUDIV_OFFSET 7
--#define PM_CPUDIV_SIZE 1
--#define PM_HSBSEL_OFFSET 8
--#define PM_HSBSEL_SIZE 3
--#define PM_HSBDIV_OFFSET 15
--#define PM_HSBDIV_SIZE 1
--#define PM_PBASEL_OFFSET 16
--#define PM_PBASEL_SIZE 3
--#define PM_PBADIV_OFFSET 23
--#define PM_PBADIV_SIZE 1
--#define PM_PBBSEL_OFFSET 24
--#define PM_PBBSEL_SIZE 3
--#define PM_PBBDIV_OFFSET 31
--#define PM_PBBDIV_SIZE 1
--
--/* Bitfields in PLL0 */
--#define PM_PLLEN_OFFSET 0
--#define PM_PLLEN_SIZE 1
--#define PM_PLLOSC_OFFSET 1
--#define PM_PLLOSC_SIZE 1
--#define PM_PLLOPT_OFFSET 2
--#define PM_PLLOPT_SIZE 3
--#define PM_PLLDIV_OFFSET 8
--#define PM_PLLDIV_SIZE 8
--#define PM_PLLMUL_OFFSET 16
--#define PM_PLLMUL_SIZE 8
--#define PM_PLLCOUNT_OFFSET 24
--#define PM_PLLCOUNT_SIZE 6
--#define PM_PLLTEST_OFFSET 31
--#define PM_PLLTEST_SIZE 1
--
--/* Bitfields in ICR */
--#define PM_LOCK0_OFFSET 0
--#define PM_LOCK0_SIZE 1
--#define PM_LOCK1_OFFSET 1
--#define PM_LOCK1_SIZE 1
--#define PM_WAKE_OFFSET 2
--#define PM_WAKE_SIZE 1
--#define PM_CKRDY_OFFSET 5
--#define PM_CKRDY_SIZE 1
--#define PM_MSKRDY_OFFSET 6
--#define PM_MSKRDY_SIZE 1
--
--/* Bitfields in GCCTRL0 */
--#define PM_OSCSEL_OFFSET 0
--#define PM_OSCSEL_SIZE 1
--#define PM_PLLSEL_OFFSET 1
--#define PM_PLLSEL_SIZE 1
--#define PM_CEN_OFFSET 2
--#define PM_CEN_SIZE 1
--#define PM_DIVEN_OFFSET 4
--#define PM_DIVEN_SIZE 1
--#define PM_DIV_OFFSET 8
--#define PM_DIV_SIZE 8
--
--/* Bitfields in RCAUSE */
--#define PM_POR_OFFSET 0
--#define PM_POR_SIZE 1
--#define PM_EXT_OFFSET 2
--#define PM_EXT_SIZE 1
--#define PM_WDT_OFFSET 3
--#define PM_WDT_SIZE 1
--#define PM_NTAE_OFFSET 4
--#define PM_NTAE_SIZE 1
--
--/* Bit manipulation macros */
--#define PM_BIT(name) \
-- (1 << PM_##name##_OFFSET)
--#define PM_BF(name,value) \
-- (((value) & ((1 << PM_##name##_SIZE) - 1)) \
-- << PM_##name##_OFFSET)
--#define PM_BFEXT(name,value) \
-- (((value) >> PM_##name##_OFFSET) \
-- & ((1 << PM_##name##_SIZE) - 1))
--#define PM_BFINS(name,value,old)\
-- (((old) & ~(((1 << PM_##name##_SIZE) - 1) \
-- << PM_##name##_OFFSET)) \
-- | PM_BF(name,value))
--
--/* Register access macros */
--#define pm_readl(reg) \
-- __raw_readl((void __iomem __force *)PM_BASE + PM_##reg)
--#define pm_writel(reg,value) \
-- __raw_writel((value), (void __iomem __force *)PM_BASE + PM_##reg)
--
--#endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/pm-v1.h linux-2.6.28.2/arch/avr32/mach-at32ap/pm-v1.h
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/pm-v1.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/pm-v1.h 2009-01-29 08:52:50.000000000 +0100
-@@ -0,0 +1,112 @@
-+/*
-+ * Register definitions for the Power Manager (PM)
-+ */
-+#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
-+#define __ARCH_AVR32_MACH_AT32AP_PM_H__
-+
-+/* PM register offsets */
-+#define PM_MCCTRL 0x0000
-+#define PM_CKSEL 0x0004
-+#define PM_CPU_MASK 0x0008
-+#define PM_HSB_MASK 0x000c
-+#define PM_PBA_MASK 0x0010
-+#define PM_PBB_MASK 0x0014
-+#define PM_PLL0 0x0020
-+#define PM_PLL1 0x0024
-+#define PM_IER 0x0040
-+#define PM_IDR 0x0044
-+#define PM_IMR 0x0048
-+#define PM_ISR 0x004c
-+#define PM_ICR 0x0050
-+#define PM_GCCTRL(x) (0x0060 + 4 * (x))
-+#define PM_RCAUSE 0x00c0
-+
-+/* Bitfields in CKSEL */
-+#define PM_CPUSEL_OFFSET 0
-+#define PM_CPUSEL_SIZE 3
-+#define PM_CPUDIV_OFFSET 7
-+#define PM_CPUDIV_SIZE 1
-+#define PM_HSBSEL_OFFSET 8
-+#define PM_HSBSEL_SIZE 3
-+#define PM_HSBDIV_OFFSET 15
-+#define PM_HSBDIV_SIZE 1
-+#define PM_PBASEL_OFFSET 16
-+#define PM_PBASEL_SIZE 3
-+#define PM_PBADIV_OFFSET 23
-+#define PM_PBADIV_SIZE 1
-+#define PM_PBBSEL_OFFSET 24
-+#define PM_PBBSEL_SIZE 3
-+#define PM_PBBDIV_OFFSET 31
-+#define PM_PBBDIV_SIZE 1
-+
-+/* Bitfields in PLL0 */
-+#define PM_PLLEN_OFFSET 0
-+#define PM_PLLEN_SIZE 1
-+#define PM_PLLOSC_OFFSET 1
-+#define PM_PLLOSC_SIZE 1
-+#define PM_PLLOPT_OFFSET 2
-+#define PM_PLLOPT_SIZE 3
-+#define PM_PLLDIV_OFFSET 8
-+#define PM_PLLDIV_SIZE 8
-+#define PM_PLLMUL_OFFSET 16
-+#define PM_PLLMUL_SIZE 8
-+#define PM_PLLCOUNT_OFFSET 24
-+#define PM_PLLCOUNT_SIZE 6
-+#define PM_PLLTEST_OFFSET 31
-+#define PM_PLLTEST_SIZE 1
-+
-+/* Bitfields in ICR */
-+#define PM_LOCK0_OFFSET 0
-+#define PM_LOCK0_SIZE 1
-+#define PM_LOCK1_OFFSET 1
-+#define PM_LOCK1_SIZE 1
-+#define PM_WAKE_OFFSET 2
-+#define PM_WAKE_SIZE 1
-+#define PM_CKRDY_OFFSET 5
-+#define PM_CKRDY_SIZE 1
-+#define PM_MSKRDY_OFFSET 6
-+#define PM_MSKRDY_SIZE 1
-+
-+/* Bitfields in GCCTRL0 */
-+#define PM_OSCSEL_OFFSET 0
-+#define PM_OSCSEL_SIZE 1
-+#define PM_PLLSEL_OFFSET 1
-+#define PM_PLLSEL_SIZE 1
-+#define PM_CEN_OFFSET 2
-+#define PM_CEN_SIZE 1
-+#define PM_DIVEN_OFFSET 4
-+#define PM_DIVEN_SIZE 1
-+#define PM_DIV_OFFSET 8
-+#define PM_DIV_SIZE 8
-+
-+/* Bitfields in RCAUSE */
-+#define PM_POR_OFFSET 0
-+#define PM_POR_SIZE 1
-+#define PM_EXT_OFFSET 2
-+#define PM_EXT_SIZE 1
-+#define PM_WDT_OFFSET 3
-+#define PM_WDT_SIZE 1
-+#define PM_NTAE_OFFSET 4
-+#define PM_NTAE_SIZE 1
-+
-+/* Bit manipulation macros */
-+#define PM_BIT(name) \
-+ (1 << PM_##name##_OFFSET)
-+#define PM_BF(name,value) \
-+ (((value) & ((1 << PM_##name##_SIZE) - 1)) \
-+ << PM_##name##_OFFSET)
-+#define PM_BFEXT(name,value) \
-+ (((value) >> PM_##name##_OFFSET) \
-+ & ((1 << PM_##name##_SIZE) - 1))
-+#define PM_BFINS(name,value,old)\
-+ (((old) & ~(((1 << PM_##name##_SIZE) - 1) \
-+ << PM_##name##_OFFSET)) \
-+ | PM_BF(name,value))
-+
-+/* Register access macros */
-+#define pm_readl(reg) \
-+ __raw_readl((void __iomem __force *)PM_BASE + PM_##reg)
-+#define pm_writel(reg,value) \
-+ __raw_writel((value), (void __iomem __force *)PM_BASE + PM_##reg)
-+
-+#endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/pm-v3.h linux-2.6.28.2/arch/avr32/mach-at32ap/pm-v3.h
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/pm-v3.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/pm-v3.h 2009-01-29 08:52:50.000000000 +0100
-@@ -0,0 +1,283 @@
-+/*
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __PM_V3_H__
-+#define __PM_V3_H__
-+
-+#include <mach/chip.h>
-+
-+/* PM Register offsets */
-+#ifndef __ASSEMBLY__
-+struct pm_regs {
-+ u32 MCCTRL; /* Main Clock Control */
-+ u32 CKSEL; /* Clock Select */
-+ u32 CPUMASK; /* CPU Clock Mask */
-+ u32 HSBMASK; /* HSB Clock Mask */
-+ u32 PBAMASK; /* PBA Clock Mask */
-+ u32 PBBMASK; /* PBB Clock Mask */
-+ u32 PBADIVMASK; /* Divided PBA Clock Mask */
-+ u32 PBBDIVMASK; /* Divided PBB Clock Mask */
-+ u32 __reserved1[8];
-+ u32 PLL[3]; /* PLL Control */
-+ u32 __reserved2[13];
-+ u32 OSCCTRL[3]; /* Oscillator Control */
-+ u32 __reserved3[5];
-+ u32 OSCCTRL32; /* 32 kHz Oscillator Control */
-+ u32 __reserved4[7];
-+ u32 IER; /* Interrupt Enable */
-+ u32 IDR; /* Interrupt Disable */
-+ u32 IMR; /* Interrupt Mask */
-+ u32 ISR; /* Interrupt Status */
-+ u32 ICR; /* Interrupt Clear */
-+ u32 POSCSR; /* Power and Oscillator Status */
-+ u32 __reserved5[10];
-+ u32 GCCTRL[8]; /* Generic Clock Control */
-+ u32 __reserved6[8];
-+ u32 RCCR; /* RC Oscillator Calibration */
-+ u32 BGCR; /* Bandgap Calibration */
-+ u32 VREGCR; /* Buck Regulator Calibration */
-+ u32 BOD; /* BOD Level */
-+ u32 PPCR; /* Peripheral Power Control */
-+ u32 __reserved7[11];
-+ u32 RCAUSE; /* Reset Cause */
-+ u32 WCAUSE; /* Wake Cause */
-+ u32 AWEN; /* Asynchronous Wake Enable */
-+ u32 __reserved8[14];
-+ u32 GPLP; /* General Purpose Low-Power */
-+};
-+#endif
-+
-+/* Assembly-friendly register offsets; same as above */
-+#define PM_MCCTRL 0x0000
-+#define PM_CKSEL 0x0004
-+#define PM_CPUMASK 0x0008
-+#define PM_HSBMASK 0x000c
-+#define PM_PBAMASK 0x0010
-+#define PM_PBBMASK 0x0014
-+#define PM_PBADIVMASK 0x0018
-+#define PM_PBBDIVMASK 0x001c
-+#define PM_PLL0 0x0040
-+#define PM_PLL1 0x0044
-+#define PM_PLL2 0x0048
-+#define PM_OSCCTRL0 0x0080
-+#define PM_OSCCTRL1 0x0084
-+#define PM_OSCCTRL2 0x0088
-+#define PM_OSCCTRL32 0x00a0
-+#define PM_IER 0x00c0
-+#define PM_IDR 0x00c4
-+#define PM_IMR 0x00c8
-+#define PM_ISR 0x00cc
-+#define PM_ICR 0x00d0
-+#define PM_POSCSR 0x00d4
-+#define PM_GCCTRL 0x0100
-+#define PM_RCCR 0x0140
-+#define PM_BGCR 0x0144
-+#define PM_VREGCR 0x0148
-+#define PM_BOD 0x014c
-+#define PM_PPCR 0x0150
-+#define PM_RC_RCAUSE 0x0180
-+#define PM_WCAUSE 0x0184
-+#define PM_AWEN 0x0188
-+#define PM_GPLP 0x01c0
-+
-+/* Bits in MCCTRL */
-+#define PM_MCCTRL_MCSEL_START 0
-+#define PM_MCCTRL_MCSEL_SIZE 2
-+#define PM_MCCTRL_OSC0EN_BIT 2
-+#define PM_MCCTRL_OSC1EN_BIT 3
-+#define PM_MCCTRL_OSC2EN_BIT 4
-+#define PM_MCCTRL_CRIPEL_BIT 24
-+
-+/* Bits in CKSEL */
-+#define PM_CKSEL_CPUSEL_START 0
-+#define PM_CKSEL_CPUSEL_SIZE 3
-+#define PM_CKSEL_CPUDIV_BIT 7
-+#define PM_CKSEL_HSBSEL_START 8
-+#define PM_CKSEL_HSBSEL_SIZE 3
-+#define PM_CKSEL_HSBDIV_BIT 15
-+#define PM_CKSEL_PBASEL_START 16
-+#define PM_CKSEL_PBASEL_SIZE 3
-+#define PM_CKSEL_PBADIV_BIT 23
-+#define PM_CKSEL_PBBSEL_START 24
-+#define PM_CKSEL_PBBSEL_SIZE 3
-+#define PM_CKSEL_PBBDIV_BIT 31
-+
-+/* Bits in CPUMASK */
-+#define PM_CPUMASK_SYSTIMER_BIT 16
-+
-+/* Bits in PLLx */
-+#define PM_PLLx_PLLEN_BIT 0
-+#define PM_PLLx_PLLOSC_START 1
-+#define PM_PLLx_PLLOSC_SIZE 2
-+#define PM_PLLx_PLLOPT_START 3
-+#define PM_PLLx_PLLOPT_SIZE 3
-+#define PM_PLLx_PLLBPL_BIT 7
-+#define PM_PLLx_PLLDIV_START 8
-+#define PM_PLLx_PLLDIV_SIZE 6
-+#define PM_PLLx_PLLMUL_START 16
-+#define PM_PLLx_PLLMUL_SIZE 6
-+#define PM_PLLx_PLLCOUNT_START 24
-+#define PM_PLLx_PLLCOUNT_SIZE 6
-+#define PM_PLLx_PLLIOTESTEN_BIT 30
-+#define PM_PLLx_PLLTEST_BIT 31
-+
-+/* Bits in OSCCTRLx */
-+#define PM_OSCCTRLx_MODE_START 0
-+#define PM_OSCCTRLx_MODE_SIZE 4
-+#define PM_OSCCTRLx_STARTUP_START 8
-+#define PM_OSCCTRLx_STARTUP_SIZE 3
-+
-+/* Bits in OSCCTRL32 */
-+#define PM_OSCCTRL32_OSC32EN_BIT 0
-+#define PM_OSCCTRL32_MODE_START 8
-+#define PM_OSCCTRL32_MODE_SIZE 3
-+#define PM_OSCCTRL32_STARTUP_START 16
-+#define PM_OSCCTRL32_STARTUP_SIZE 3
-+
-+/* Bits in IER/IDR/IMR/ISR/ICR */
-+#define PM_ISR_OSC0RDY_BIT 0
-+#define PM_ISR_OSC1RDY_BIT 1
-+#define PM_ISR_OSC2RDY_BIT 2
-+#define PM_ISR_OSC32RDY_BIT 7
-+#define PM_ISR_LOCK0_BIT 8
-+#define PM_ISR_LOCK1_BIT 9
-+#define PM_ISR_LOCK2_BIT 10
-+#define PM_ISR_LOCK0LOST_BIT 16
-+#define PM_ISR_LOCK1LOST_BIT 17
-+#define PM_ISR_LOCK2LOST_BIT 18
-+#define PM_ISR_CKRDY_BIT 24
-+#define PM_ISR_MSKRDY_BIT 25
-+#define PM_ISR_WAKE_BIT 26
-+#define PM_ISR_BODDET_BIT 27
-+#define PM_ISR_PERRDY_BIT 28
-+
-+/* Bits in POSCSR */
-+#define PM_POSCSR_OSC0RDY_BIT 0
-+#define PM_POSCSR_OSC1RDY_BIT 1
-+#define PM_POSCSR_OSC32RDY_BIT 7
-+#define PM_POSCSR_LOCK0_BIT 8
-+#define PM_POSCSR_LOCK1_BIT 9
-+#define PM_POSCSR_LOCK0LOST_BIT 16
-+#define PM_POSCSR_LOCK1LOST_BIT 17
-+#define PM_POSCSR_CKRDY_BIT 24
-+#define PM_POSCSR_MSKRDY_BIT 25
-+#define PM_POSCSR_WAKE_BIT 26
-+#define PM_POSCSR_BODDET_BIT 27
-+#define PM_POSCSR_PERRDY_BIT 28
-+
-+/* Bits in GCCTRL */
-+#define PM_GCCTRL_CEN_BIT 0
-+#define PM_GCCTRL_DIVEN_BIT 1
-+#define PM_GCCTRL_OSCSEL_START 8
-+#define PM_GCCTRL_OSCSEL_SIZE 4
-+#define PM_GCCTRL_DIV_START 16
-+#define PM_GCCTRL_DIV_SIZE 8
-+
-+/* Bits in RCCR */
-+#define PM_RCCR_CALIB_START 0
-+#define PM_RCCR_CALIB_SIZE 10
-+#define PM_RCCR_FCD_BIT 16
-+#define PM_RCCR_KEY_START 24
-+#define PM_RCCR_KEY_SIZE 8
-+
-+/* Bits in BGCR */
-+#define PM_BGCR_CALIB_START 0
-+#define PM_BGCR_CALIB_SIZE 3
-+#define PM_BGCR_FCD_BIT 16
-+#define PM_BGCR_KEY_START 24
-+#define PM_BGCR_KEY_SIZE 8
-+
-+/* Bits in VREGCR */
-+#define PM_VREGCR_CALIB_START 0
-+#define PM_VREGCR_CALIB_SIZE 3
-+#define PM_VREGCR_FCD_BIT 16
-+#define PM_VREGCR_KEY_START 24
-+#define PM_VREGCR_KEY_SIZE 8
-+
-+/* Bits in BOD */
-+#define PM_BOD_LEVEL_START 0
-+#define PM_BOD_LEVEL_SIZE 6
-+#define PM_BOD_HYST_BIT 6
-+#define PM_BOD_CTRL_START 8
-+#define PM_BOD_CTRL_SIZE 2
-+#define PM_BOD_FCD_BIT 16
-+#define PM_BOD_KEY_START 24
-+#define PM_BOD_KEY_SIZE 8
-+
-+/* Bits in PPCR */
-+#define PM_PPCR_EBI_VOLT_BIT 0
-+#define PM_PPCR_UTMI_CTRL_BIT 1
-+#define PM_PPCR_KEY_START 24
-+#define PM_PPCR_KEY_SIZE 8
-+
-+/* Bits in RC_RCAUSE */
-+#define PM_RC_RCAUSE_POR_BIT 0
-+#define PM_RC_RCAUSE_BOD_BIT 1
-+#define PM_RC_RCAUSE_EXT_BIT 2
-+#define PM_RC_RCAUSE_WDT_BIT 3
-+#define PM_RC_RCAUSE_JTAG_BIT 4
-+#define PM_RC_RCAUSE_NTAE_BIT 5
-+#define PM_RC_RCAUSE_SLEEP_BIT 6
-+#define PM_RC_RCAUSE_CPUERR_BIT 7
-+#define PM_RC_RCAUSE_OCDRST_BIT 8
-+#define PM_RC_RCAUSE_JTAGHARD_BIT 9
-+
-+/* Bits in WCAUSE */
-+#define PM_WCAUSE_PERIPH0_BIT 0
-+#define PM_WCAUSE_PERIPH1_BIT 1
-+#define PM_WCAUSE_EIC_BIT 16
-+#define PM_WCAUSE_RTC_BIT 17
-+
-+/* Constants for MCCTRL:MCSEL */
-+#define PM_MCSEL_SLOW 0
-+#define PM_MCSEL_OSC0 1
-+#define PM_MCSEL_PLL0 2
-+
-+/* Constants for OSCCTRLx:MODE */
-+#define PM_MODE_EXT_CLOCK 0
-+#define PM_MODE_CRYSTAL_ACG 1
-+#define PM_MODE_CRYSTAL_G0 4
-+#define PM_MODE_CRYSTAL_G1 5
-+#define PM_MODE_CRYSTAL_G2 6
-+#define PM_MODE_CRYSTAL_G3 7
-+
-+/* Constants for GCCTRL:OSCSEL */
-+#define PM_OSCSEL_SLOW 0
-+#define PM_OSCSEL_CLK32 1
-+#define PM_OSCSEL_OSC0 2
-+#define PM_OSCSEL_OSC1 3
-+#define PM_OSCSEL_PLL0 4
-+#define PM_OSCSEL_PLL1 5
-+
-+/* Constants for BOD:CTRL */
-+#define PM_CTRL_OFF1 0
-+#define PM_CTRL_ENABLED 1
-+#define PM_CTRL_ENABLED_NORESET 2
-+#define PM_CTRL_OFF2 3
-+
-+/* Bit manipulation macros */
-+#define PM_BIT(name) \
-+ (1 << PM_##name##_BIT)
-+#define PM_BF(name,value) \
-+ (((value) & ((1 << PM_##name##_SIZE) - 1)) \
-+ << PM_##name##_START)
-+#define PM_BFEXT(name,value) \
-+ (((value) >> PM_##name##_START) \
-+ & ((1 << PM_##name##_SIZE) - 1))
-+#define PM_BFINS(name,value,old) \
-+ (((old) & ~(((1 << PM_##name##_SIZE) - 1) \
-+ << PM_##name##_START)) \
-+ | PM_BF(name,value))
-+
-+/* Register access macros */
-+#define __pm_regs ((struct pm_regs __iomem __force *)PM_BASE)
-+#define pm_readl(reg) \
-+ __raw_readl(&__pm_regs->reg)
-+#define pm_writel(reg, value) \
-+ __raw_writel(value, &__pm_regs->reg)
-+
-+#endif /* __PM_V3_H__ */
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/sdc.h linux-2.6.28.2/arch/avr32/mach-at32ap/sdc.h
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/sdc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/sdc.h 2009-01-29 08:52:50.000000000 +0100
-@@ -0,0 +1,103 @@
-+/* SDC */
-+
-+/* Register offsets */
-+#define SDC_CTRL 0x0000
-+#define SDC_ASYNC 0x0004
-+#define SDC_SYNC 0x0008
-+#define SDC_FILTERDUR 0x000c
-+#define SDC_OSCCTRL32 0x0010
-+#define SDC_STATUS 0x0014
-+#define SDC_ECR 0x0018
-+#define SDC_IER 0x001c
-+#define SDC_IDR 0x0020
-+#define SDC_IMR 0x0024
-+#define SDC_GPLP 0x0040
-+
-+/* Bits in CTRL */
-+#define SDC_CTRL_PIN_EN_BIT 0
-+#define SDC_CTRL_AST_EN_BIT 8
-+#define SDC_CTRL_WDT_EN_BIT 9
-+#define SDC_CTRL_OCD_EN_BIT 10
-+#define SDC_CTRL_JTAG_EN_BIT 11
-+#define SDC_CTRL_CORE_POR_TEST_BIT 23
-+#define SDC_CTRL_KEY_START 24
-+#define SDC_CTRL_KEY_SIZE 8
-+
-+/* Bits in ASYNC */
-+#define SDC_ASYNC_MODE_BIT 4
-+#define SDC_ASYNC_POL_BIT 8
-+#define SDC_ASYNC_KEY_START 24
-+#define SDC_ASYNC_KEY_SIZE 8
-+
-+/* Bits in SYNC */
-+#define SDC_SYNC_EN_BIT 0
-+#define SDC_SYNC_MODE_BIT 4
-+#define SDC_SYNC_POL_BIT 8
-+#define SDC_SYNC_FILTER_BIT 12
-+#define SDC_SYNC_KEY_START 24
-+#define SDC_SYNC_KEY_SIZE 8
-+
-+/* Bits in FILTERDUR */
-+#define SDC_FILTERDUR_Duration_START 0
-+#define SDC_FILTERDUR_Duration_SIZE 16
-+#define SDC_FILTERDUR_KEY_START 24
-+#define SDC_FILTERDUR_KEY_SIZE 8
-+
-+/* Bits in OSCCTRL32 */
-+#define SDC_OSCCTRL32_OSC32EN_BIT 0
-+#define SDC_OSCCTRL32_MODE_START 8
-+#define SDC_OSCCTRL32_MODE_SIZE 4
-+#define SDC_OSCCTRL32_STARTUP_START 16
-+#define SDC_OSCCTRL32_STARTUP_SIZE 3
-+#define SDC_OSCCTRL32_KEY_START 24
-+#define SDC_OSCCTRL32_KEY_SIZE 8
-+
-+/* Bits in STATUS */
-+#define SDC_STATUS_PIN_EVENT_BIT 0
-+#define SDC_STATUS_AST_EVENT_BIT 8
-+#define SDC_STATUS_WDT_EVENT_BIT 9
-+#define SDC_STATUS_OCD_EVENT_BIT 10
-+#define SDC_STATUS_JTAG_EVENT_BIT 11
-+#define SDC_STATUS_PIN_BIT 16
-+#define SDC_STATUS_BUSY_BIT 24
-+#define SDC_STATUS_SWTCH_BIT 30
-+#define SDC_STATUS_VBAT_BIT 31
-+
-+/* Bits in ECR */
-+#define SDC_ECR_PIN_EVENT_BIT 0
-+#define SDC_ECR_AST_EVENT_BIT 8
-+#define SDC_ECR_WDT_EVENT_BIT 9
-+#define SDC_ECR_OCD_EVENT_BIT 10
-+#define SDC_ECR_JTAG_EVENT_BIT 11
-+
-+/* Bits in IER */
-+#define SDC_IER_PIN_EVENT_BIT 0
-+#define SDC_IER_READY_BIT 24
-+
-+/* Bits in IDR */
-+#define SDC_IDR_PIN_EVENT_BIT 0
-+#define SDC_IDR_READY_BIT 24
-+
-+/* Bits in IMR */
-+#define SDC_IMR_PIN_EVENT_BIT 0
-+#define SDC_IMR_READY_BIT 24
-+
-+/* Bit manipulation macros */
-+#define SDC_BIT(name) \
-+ (1 << SDC_##name##_BIT)
-+#define SDC_BF(name,value) \
-+ (((value) & ((1 << SDC_##name##_SIZE) - 1)) \
-+ << SDC_##name##_START)
-+#define SDC_BFEXT(name,value) \
-+ (((value) >> SDC_##name##_START) \
-+ & ((1 << SDC_##name##_SIZE) - 1))
-+#define SDC_BFINS(name,value,old) \
-+ (((old) & ~(((1 << SDC_##name##_SIZE) - 1) \
-+ << SDC_##name##_START)) \
-+ | SDC_BF(name,value))
-+
-+/* Register access macros */
-+#define sdc_readl(reg) \
-+ __raw_readl((void __iomem __force *)(SDC_BASE + SDC_##reg))
-+#define sdc_writel(reg, value) \
-+ __raw_writel(value, (void __iomem __force *)(SDC_BASE + SDC_##reg))
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/timer-ast.c linux-2.6.28.2/arch/avr32/mach-at32ap/timer-ast.c
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/timer-ast.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/timer-ast.c 2009-01-29 08:52:50.000000000 +0100
-@@ -0,0 +1,191 @@
-+/*
-+ * Asynchronous Timer (AST) used as clocksource / clockevent
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/clockchips.h>
-+#include <linux/clocksource.h>
-+#include <linux/interrupt.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/irq.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/ast_regs.h>
-+
-+static void __iomem *ast_regs;
-+
-+static inline void ast_wait_ready(void)
-+{
-+ while (ast_readl(ast_regs, SR) & AST_BIT(BUSY))
-+ cpu_relax();
-+}
-+
-+static cycle_t read_ast_counter(void)
-+{
-+ return ast_readl(ast_regs, CV);
-+}
-+
-+static struct clocksource ast_clksrc = {
-+ .name = "ast",
-+ .rating = 400,
-+ .read = read_ast_counter,
-+ .mask = CLOCKSOURCE_MASK(32),
-+ .shift = 16,
-+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-+};
-+
-+static irqreturn_t ast_clkevt_interrupt(int irq, void *dev_id)
-+{
-+ struct clock_event_device *clkevt = dev_id;
-+
-+ /*
-+ * We make sure delta is always long enough so that the BUSY
-+ * bit is never set at this point.
-+ */
-+ ast_writel(ast_regs, SCR, AST_BIT(ALARM0));
-+ clkevt->event_handler(clkevt);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct irqaction ast_clkevt_irqaction = {
-+ .handler = ast_clkevt_interrupt,
-+ .flags = IRQF_TIMER | IRQF_DISABLED,
-+ .name = "timer-ast",
-+};
-+
-+static int ast_next_event(unsigned long delta,
-+ struct clock_event_device *clkevt)
-+{
-+ ast_wait_ready();
-+ ast_writel(ast_regs, AR0, ast_readl(ast_regs, CV) + delta);
-+
-+ return 0;
-+}
-+
-+static void ast_mode(enum clock_event_mode mode,
-+ struct clock_event_device *evdev)
-+{
-+ switch (mode) {
-+ case CLOCK_EVT_MODE_ONESHOT:
-+ case CLOCK_EVT_MODE_RESUME:
-+ /* Make sure we don't trigger an alarm before we get
-+ * around to reprogramming it.
-+ */
-+ ast_wait_ready();
-+ ast_writel(ast_regs, AR0, ast_readl(ast_regs, CV) - 1);
-+ ast_wait_ready();
-+ ast_writel(ast_regs, SCR, AST_BIT(ALARM0));
-+ ast_wait_ready();
-+ ast_writel(ast_regs, IER, AST_BIT(ALARM0));
-+ break;
-+ case CLOCK_EVT_MODE_UNUSED:
-+ case CLOCK_EVT_MODE_SHUTDOWN:
-+ ast_writel(ast_regs, IDR, AST_BIT(ALARM0));
-+ break;
-+ default:
-+ BUG();
-+ }
-+}
-+
-+static struct clock_event_device ast_clkevt = {
-+ .name = "ast",
-+ .features = CLOCK_EVT_FEAT_ONESHOT,
-+ .shift = 16,
-+ .rating = 400,
-+ .cpumask = CPU_MASK_CPU0,
-+ .set_next_event = ast_next_event,
-+ .set_mode = ast_mode,
-+};
-+
-+void __init ast_time_init(struct platform_device *pdev, unsigned int clksel)
-+{
-+ struct clk *clk, *pclk;
-+ struct resource *regs;
-+ unsigned long ast_hz;
-+ int irq;
-+ int ret;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ pr_debug("AST: No MMIO resource\n");
-+ return;
-+ }
-+
-+ pclk = clk_get(&pdev->dev, "pclk");
-+ if (!pclk) {
-+ pr_debug("AST: No peripheral clock (pclk)\n");
-+ return;
-+ }
-+ clk_enable(pclk);
-+
-+ /* Too early for ioremap() */
-+ ast_regs = (void __iomem __force *)regs->start;
-+
-+ switch (clksel) {
-+ case AST_CLOCK_SLOW:
-+ clk = clk_get(NULL, "rcosc");
-+ break;
-+ case AST_CLOCK_OSC32:
-+ clk = clk_get(NULL, "osc32");
-+ break;
-+ case AST_CLOCK_PB:
-+ clk = pclk;
-+ break;
-+ case AST_CLOCK_GC:
-+ clk = clk_get(&pdev->dev, "gclk");
-+ break;
-+ default:
-+ clk = NULL;
-+ break;
-+ }
-+
-+ if (!clk) {
-+ pr_debug("AST: clock %u invalid, using pb clock\n", clksel);
-+ clk = pclk;
-+ }
-+ clk_enable(clk);
-+
-+ ast_writel(ast_regs, CLOCK,
-+ AST_BF(CLOCK_CSSEL, clksel) | AST_BIT(CLOCK_CEN));
-+ ast_writel(ast_regs, CR, AST_BIT(CR_EN) | AST_BIT(CR_PCLR));
-+
-+ /* Using hardcoded divide-by-two prescaler */
-+ ast_hz = clk_get_rate(clk) / 2;
-+ ast_clksrc.mult = clocksource_hz2mult(ast_hz, ast_clksrc.shift);
-+
-+ ret = clocksource_register(&ast_clksrc);
-+ if (ret)
-+ pr_debug("AST: could not register clocksource: %d\n", ret);
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ pr_debug("AST: No IRQ resource, won't setup clockevent\n");
-+ return;
-+ }
-+
-+ ast_clkevt.mult = div_sc(ast_hz, NSEC_PER_SEC, ast_clkevt.shift);
-+ ast_clkevt.max_delta_ns = clockevent_delta2ns((u32)~0U, &ast_clkevt);
-+ ast_clkevt.min_delta_ns = clockevent_delta2ns(2, &ast_clkevt) + 100;
-+
-+ ast_clkevt_irqaction.dev_id = &ast_clkevt;
-+
-+ ret = setup_irq(irq, &ast_clkevt_irqaction);
-+ if (ret) {
-+ pr_debug("AST: Could not request IRQ %d: %d\n", irq, ret);
-+ return;
-+ }
-+
-+ clockevents_register_device(&ast_clkevt);
-+
-+ pr_info("Using Asynchronous Timer %d @ %lu.%03lu Mhz"
-+ " (regs 0x%p, irq %d)\n",
-+ pdev->id, ((ast_hz + 500) / 1000) / 1000,
-+ ((ast_hz + 500) / 1000) % 1000, ast_regs, irq);
-+}
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mm/tlb.c linux-2.6.28.2/arch/avr32/mm/tlb.c
---- linux-2.6.28.2-0rig//arch/avr32/mm/tlb.c 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mm/tlb.c 2009-01-29 08:52:50.000000000 +0100
-@@ -12,7 +12,13 @@
- #include <asm/mmu_context.h>
-
- /* TODO: Get the correct number from the CONFIG1 system register */
--#define NR_TLB_ENTRIES 32
-+#if defined(CONFIG_CPU_AT32AP700X)
-+# define NR_TLB_ENTRIES 32
-+#elif defined(CONFIG_CPU_AT32AP720X)
-+# define NR_TLB_ENTRIES 64
-+#else
-+# error Unknown CPU type
-+#endif
-
- static void show_dtlb_entry(unsigned int index)
- {
-@@ -85,9 +91,15 @@
- u32 tlbar = sysreg_read(TLBARLO);
-
- rp = 32 - fls(tlbar);
-- if (rp == 32) {
-+ if (NR_TLB_ENTRIES > 32 && rp >= 32) {
-+ tlbar = sysreg_read(TLBARHI);
-+ rp = 64 - fls(tlbar);
-+ }
-+ if (rp >= NR_TLB_ENTRIES) {
- rp = 0;
- sysreg_write(TLBARLO, -1L);
-+ if (NR_TLB_ENTRIES > 32)
-+ sysreg_write(TLBARHI, -1L);
- }
-
- mmucr = SYSREG_BFINS(DRP, rp, mmucr);
-@@ -131,16 +143,22 @@
-
- if (!(mmucr & SYSREG_BIT(MMUCR_N))) {
- unsigned int entry;
-- u32 tlbarlo;
-+ u32 tlbarlo, tlbarhi;
-
- /* Clear the "valid" bit */
- sysreg_write(TLBEHI, tlbehi);
-
- /* mark the entry as "not accessed" */
- entry = SYSREG_BFEXT(DRP, mmucr);
-- tlbarlo = sysreg_read(TLBARLO);
-- tlbarlo |= (0x80000000UL >> entry);
-- sysreg_write(TLBARLO, tlbarlo);
-+ if (NR_TLB_ENTRIES > 32 && entry > 32) {
-+ tlbarhi = sysreg_read(TLBARHI);
-+ tlbarhi |= (0x80000000UL >> (entry - 32));
-+ sysreg_write(TLBARHI, tlbarhi);
-+ } else {
-+ tlbarlo = sysreg_read(TLBARLO);
-+ tlbarlo |= (0x80000000UL >> entry);
-+ sysreg_write(TLBARLO, tlbarlo);
-+ }
-
- /* update the entry with valid bit clear */
- __builtin_tlbw();
-@@ -179,9 +197,10 @@
- unsigned long flags;
- int size;
-
-- local_irq_save(flags);
- size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
-
-+ local_irq_save(flags);
-+
- if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
- mm->context = NO_CONTEXT;
- if (mm == current->mm)
-diff -urN linux-2.6.28.2-0rig//drivers/dma/atmel_pdca.c linux-2.6.28.2/drivers/dma/atmel_pdca.c
---- linux-2.6.28.2-0rig//drivers/dma/atmel_pdca.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/drivers/dma/atmel_pdca.c 2009-01-29 08:52:50.000000000 +0100
-@@ -0,0 +1,668 @@
-+/*
-+ * Driver for the Atmel PDCA Peripheral DMA Controller
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#define DEBUG
-+#include <linux/atmel_pdca.h>
-+#include <linux/clk.h>
-+#include <linux/dmaengine.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/list.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/scatterlist.h>
-+#include <linux/spinlock.h>
-+
-+/*
-+ * Since each descriptor can hold a whole scatterlist, we don't need
-+ * many of them.
-+ */
-+#define NR_DESCS_PER_CHANNEL 8
-+
-+static struct pdca_desc *pdca_desc_entry(struct list_head *node)
-+{
-+ return list_entry(node, struct pdca_desc, desc_node);
-+}
-+
-+static struct pdca_desc *pdca_next_desc(struct pdca_chan *pch,
-+ struct pdca_desc *desc)
-+{
-+ if (desc->desc_node.next != &pch->queue)
-+ return pdca_desc_entry(desc->desc_node.next);
-+ return NULL;
-+}
-+
-+static struct pdca_desc *pdca_desc_get(struct pdca_chan *pch)
-+{
-+ struct pdca_desc *desc = NULL;
-+
-+ spin_lock_bh(&pch->lock);
-+ if (likely(!list_empty(&pch->freelist))) {
-+ desc = pdca_desc_entry(pch->freelist.next);
-+ list_del(&desc->desc_node);
-+ }
-+ spin_unlock_bh(&pch->lock);
-+
-+ return desc;
-+}
-+
-+static dma_cookie_t pdca_assign_cookie(struct pdca_chan *pch,
-+ struct pdca_desc *desc)
-+{
-+ dma_cookie_t cookie = pch->chan.cookie;
-+
-+ if (++cookie < 0)
-+ cookie = 1;
-+
-+ pch->chan.cookie = cookie;
-+ desc->txd.cookie = cookie;
-+
-+ return cookie;
-+}
-+
-+static void pdca_desc_done(struct pdca_chan *pch, struct pdca_desc *desc)
-+{
-+ struct dma_async_tx_descriptor *txd = &desc->txd;
-+ dma_async_tx_callback callback;
-+ void *param;
-+
-+ pch->completed = txd->cookie;
-+ callback = txd->callback;
-+ param = txd->callback_param;
-+
-+ dev_vdbg(&pch->chan.dev, " completed %u\n", txd->cookie);
-+
-+ /*
-+ * We can only handle scatterlists, so this is easy. No other
-+ * drivers do the right thing with scatterlists though...
-+ *
-+ * Note that we ensure that at least one of these flags are
-+ * set when the descriptor is prepared, as we never need to
-+ * unmap the peripheral side.
-+ */
-+ if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP))
-+ dma_unmap_sg(pch->chan.dev.parent, desc->sg, desc->sg_len,
-+ DMA_FROM_DEVICE);
-+ if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP))
-+ dma_unmap_sg(pch->chan.dev.parent, desc->sg, desc->sg_len,
-+ DMA_TO_DEVICE);
-+
-+ list_move(&desc->desc_node, &pch->freelist);
-+
-+ if (callback)
-+ callback(param);
-+}
-+
-+static void pdca_chan_tasklet(unsigned long param)
-+{
-+ struct pdca_chan *pch = (struct pdca_chan *)param;
-+ void __iomem *regs = pch->regs;
-+ struct pdca_desc *cur;
-+ struct pdca_desc *next;
-+ struct scatterlist *cur_sg;
-+ struct scatterlist *next_sg;
-+ u32 intflags;
-+ u32 status;
-+
-+ spin_lock(&pch->lock);
-+
-+ cur = pdca_desc_entry(pch->queue.next);
-+ next = pdca_next_desc(pch, cur);
-+
-+ cur_sg = pch->cur_sg;
-+ next_sg = pch->next_sg;
-+
-+ intflags = PDCA_TERR | PDCA_TRC | PDCA_RCZ;
-+
-+ status = pdca_readl(regs, ISR);
-+ dev_vdbg(&pch->chan.dev, "tasklet: status=%08x\n", status);
-+
-+ if (status & PDCA_TRC) {
-+ if (cur_sg) {
-+ if (sg_is_last(cur_sg)) {
-+ dev_vdbg(&pch->chan.dev,
-+ " cur sg was last in %u\n",
-+ cur->txd.cookie);
-+ pdca_desc_done(pch, cur);
-+ cur = next;
-+ next = NULL;
-+ }
-+ if (next_sg && sg_is_last(next_sg)) {
-+ dev_vdbg(&pch->chan.dev,
-+ " next sg was last in %u\n",
-+ cur->txd.cookie);
-+ pdca_desc_done(pch, cur);
-+ cur = next;
-+ next = NULL;
-+ }
-+ if (!cur) {
-+ dev_vdbg(&pch->chan.dev, " all done\n");
-+ pdca_writel(regs, CR, PDCA_CR_TDIS);
-+ cur_sg = next_sg = NULL;
-+ intflags = 0;
-+ goto done;
-+ }
-+ cur_sg = next_sg ? sg_next(next_sg) : NULL;
-+ }
-+
-+ if (!cur_sg) {
-+ dev_vdbg(&pch->chan.dev, " load sg from %u\n",
-+ cur->txd.cookie);
-+ cur_sg = cur->sg;
-+ pdca_writel(regs, PSR, cur->periph_id);
-+ pdca_writel(regs, MR, cur->reg_width);
-+ }
-+ dev_vdbg(&pch->chan.dev, " START: %08x count: %08x\n",
-+ sg_dma_address(cur_sg),
-+ sg_dma_len(cur_sg) >> cur->reg_width);
-+ pdca_writel(regs, MAR, sg_dma_address(cur_sg));
-+ pdca_writel(regs, TCR, sg_dma_len(cur_sg) >> cur->reg_width);
-+
-+ next_sg = sg_next(cur_sg);
-+ if (!next_sg) {
-+ next = pdca_next_desc(pch, cur);
-+ if (next && next->reg_width == cur->reg_width
-+ && next->periph_id == cur->periph_id) {
-+ dev_vdbg(&pch->chan.dev,
-+ "loading next_sg from %u\n",
-+ next->txd.cookie);
-+ next_sg = next->sg;
-+ }
-+ }
-+ if (next_sg) {
-+ dev_vdbg(&pch->chan.dev, " NEXT: %08x count: %08x\n",
-+ sg_dma_address(next_sg),
-+ sg_dma_len(next_sg) >> cur->reg_width);
-+ pdca_writel(regs, MARR, sg_dma_address(next_sg));
-+ pdca_writel(regs, TCRR,
-+ sg_dma_len(next_sg) >> cur->reg_width);
-+ } else {
-+ intflags &= ~PDCA_RCZ;
-+ }
-+ } else if (next_sg && (status & PDCA_RCZ)) {
-+ if (sg_is_last(cur_sg)) {
-+ dev_vdbg(&pch->chan.dev, " cur sg was last in %u\n",
-+ cur->txd.cookie);
-+ next = pdca_next_desc(pch, cur);
-+ pdca_desc_done(pch, cur);
-+ cur = next;
-+ next = NULL;
-+ }
-+
-+ cur_sg = next_sg;
-+ next_sg = sg_next(cur_sg);
-+ if (!next_sg) {
-+ next = pdca_next_desc(pch, cur);
-+ if (next && next->reg_width == cur->reg_width
-+ && next->periph_id == cur->periph_id)
-+ next_sg = next->sg;
-+ }
-+
-+ if (next_sg) {
-+ dev_vdbg(&pch->chan.dev, " NEXT: %08x count: %08x\n",
-+ sg_dma_address(next_sg),
-+ sg_dma_len(next_sg) >> cur->reg_width);
-+ pdca_writel(regs, MARR, sg_dma_address(next_sg));
-+ pdca_writel(regs, TCRR,
-+ sg_dma_len(next_sg) >> cur->reg_width);
-+ } else {
-+ dev_vdbg(&pch->chan.dev, " no next sg\n");
-+ intflags &= ~PDCA_RCZ;
-+ }
-+ }
-+
-+done:
-+ if (status & PDCA_TERR) {
-+ /*
-+ * Head of queue is busted. We must remove it, clear
-+ * the error and restart the queue.
-+ */
-+ pdca_writel(regs, TCRR, 0);
-+ pdca_writel(regs, TCR, 0);
-+ pdca_writel(regs, CR, PDCA_CR_ECLR);
-+ cur_sg = next_sg = NULL;
-+
-+ if (!cur)
-+ dev_err(&pch->chan.dev,
-+ "Transfer Error with empty queue\n");
-+ else {
-+ dev_vdbg(&pch->chan.dev,
-+ " %u is busted\n", cur->txd.cookie);
-+ pdca_desc_done(pch, cur);
-+ }
-+
-+ if (list_empty(&pch->queue)) {
-+ pdca_writel(regs, CR, PDCA_CR_TDIS);
-+ intflags = 0;
-+ }
-+ }
-+
-+ pch->cur_sg = cur_sg;
-+ pch->next_sg = next_sg;
-+
-+ dev_vdbg(&pch->chan.dev, " enabling interrupts: %08x\n", intflags);
-+ pdca_writel(regs, IER, intflags);
-+ pdca_readl(regs, SR);
-+
-+ spin_unlock(&pch->lock);
-+}
-+
-+static irqreturn_t pdca_interrupt(int irq, void *dev_id)
-+{
-+ struct pdca_dev *pdca = dev_id;
-+ struct pdca_chan *pch;
-+ void __iomem *regs;
-+ unsigned long pending;
-+ unsigned int chan;
-+
-+ pending = intc_get_pending(irq);
-+ if (unlikely(!pending))
-+ return IRQ_NONE;
-+
-+ do {
-+ chan = __ffs(pending);
-+ pch = &pdca->chan[chan];
-+ regs = pch->regs;
-+ pdca_writel(regs, IDR, ~0UL);
-+ tasklet_schedule(&pch->tasklet);
-+ pdca_readl(regs, IMR);
-+ pending &= ~(1 << chan);
-+ } while (pending);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static dma_cookie_t pdca_tx_submit(struct dma_async_tx_descriptor *txd)
-+{
-+ struct pdca_desc *desc = txd_to_pdca_desc(txd);
-+ struct pdca_chan *pch = dma_to_pdca_chan(txd->chan);
-+ void __iomem *regs = pch->regs;
-+ dma_cookie_t cookie;
-+
-+ spin_lock_bh(&pch->lock);
-+ cookie = pdca_assign_cookie(pch, desc);
-+ dev_vdbg(&pch->chan.dev, "submitted %u\n", cookie);
-+ list_add_tail(&desc->desc_node, &pch->queue);
-+ pdca_writel(regs, CR, PDCA_CR_TEN);
-+ pdca_writel(regs, IER, PDCA_TERR | PDCA_RCZ);
-+ /* The tasklet will kickstart the queue if necessary */
-+ spin_unlock_bh(&pch->lock);
-+
-+ return cookie;
-+}
-+
-+static struct dma_async_tx_descriptor *pdca_prep_slave_sg(struct dma_chan *chan,
-+ struct scatterlist *sgl, unsigned int sg_len,
-+ enum dma_data_direction direction, unsigned long flags)
-+{
-+ struct pdca_chan *pch = dma_to_pdca_chan(chan);
-+ struct pdca_slave *pslave = pch->pslave;
-+ struct pdca_desc *desc;
-+ unsigned int periph_id;
-+
-+ dev_vdbg(&chan->dev, "prep_dma_slave: %s %u segments, flags: %lx\n",
-+ direction == DMA_TO_DEVICE ? "OUT" : "IN",
-+ sg_len, flags);
-+
-+ switch (direction) {
-+ case DMA_TO_DEVICE:
-+ periph_id = pslave->tx_periph_id;
-+ flags |= DMA_COMPL_SKIP_DEST_UNMAP;
-+ break;
-+ case DMA_FROM_DEVICE:
-+ periph_id = pslave->rx_periph_id;
-+ flags |= DMA_COMPL_SKIP_SRC_UNMAP;
-+ break;
-+ default:
-+ return NULL;
-+ }
-+
-+ desc = pdca_desc_get(pch);
-+ if (!desc) {
-+ dev_err(&chan->dev,
-+ "not enough descriptors available\n");
-+ return NULL;
-+ }
-+ desc->sg = sgl;
-+ desc->sg_len = sg_len;
-+ desc->periph_id = periph_id;
-+ desc->reg_width = pslave->slave.reg_width;
-+ desc->txd.flags = flags;
-+
-+ return &desc->txd;
-+}
-+
-+static void pdca_terminate_all(struct dma_chan *chan)
-+{
-+ struct pdca_chan *pch = dma_to_pdca_chan(chan);
-+ struct pdca_desc *desc, *_desc;
-+ void __iomem *regs = pch->regs;
-+
-+ spin_lock_bh(&pch->lock);
-+ pdca_writel(regs, CR, PDCA_CR_TDIS);
-+ pdca_writel(regs, TCRR, 0);
-+ pdca_writel(regs, TCR, 0);
-+ while (pdca_readl(regs, SR) & PDCA_SR_TEN)
-+ cpu_relax();
-+
-+ list_for_each_entry_safe(desc, _desc, &pch->queue, desc_node)
-+ pdca_desc_done(pch, desc);
-+ spin_unlock_bh(&pch->lock);
-+}
-+
-+static enum dma_status pdca_is_tx_complete(struct dma_chan *chan,
-+ dma_cookie_t cookie, dma_cookie_t *done, dma_cookie_t *used)
-+{
-+ struct pdca_chan *pch = dma_to_pdca_chan(chan);
-+ dma_cookie_t last_used;
-+ dma_cookie_t last_complete;
-+
-+ last_complete = pch->completed;
-+ last_used = chan->cookie;
-+
-+ if (done)
-+ *done = last_complete;
-+ if (used)
-+ *used = last_used;
-+
-+ return dma_async_is_complete(cookie, last_complete, last_used);
-+}
-+
-+static void pdca_issue_pending(struct dma_chan *chan)
-+{
-+ /* We always issue descriptors ASAP */
-+}
-+
-+static int pdca_alloc_chan_resources(struct dma_chan *chan,
-+ struct dma_client *client)
-+{
-+ struct pdca_chan *pch = dma_to_pdca_chan(chan);
-+ struct pdca_dev *pdca = dma_to_pdca_dev(chan->device);
-+ struct dma_slave *slave = client->slave;
-+ void __iomem *regs = pch->regs;
-+
-+ /*
-+ * Channels doing slave DMA can only handle one client. This
-+ * controller can only do slave DMA.
-+ */
-+ if (chan->client_count)
-+ return -EBUSY;
-+ if (!slave || !slave->dma_dev || slave->dma_dev != pdca->dma.dev)
-+ return -EINVAL;
-+
-+ if (pdca_readl(regs, SR) & PDCA_SR_TEN)
-+ dev_err(&chan->dev, "DMA channel not idle!\n");
-+
-+ /*
-+ * We may get called multiple times if a client rejects the
-+ * channel...
-+ */
-+ if (!pch->enabled) {
-+ pch->enabled = true;
-+ clk_enable(pdca->pclk);
-+ clk_enable(pdca->hclk);
-+ }
-+
-+ pch->chan.cookie = pch->completed = 1;
-+ pch->pslave = dma_to_pdca_slave(slave);
-+
-+ while (pch->descs_allocated < NR_DESCS_PER_CHANNEL) {
-+ struct pdca_desc *desc;
-+
-+ desc = kzalloc(sizeof(struct pdca_desc), GFP_KERNEL);
-+ if (!desc) {
-+ dev_info(&chan->dev, "only allocated %d descriptors\n",
-+ pch->descs_allocated);
-+ break;
-+ }
-+
-+ dma_async_tx_descriptor_init(&desc->txd, chan);
-+ desc->txd.tx_submit = pdca_tx_submit;
-+ desc->txd.flags = DMA_CTRL_ACK;
-+ INIT_LIST_HEAD(&desc->txd.tx_list);
-+ list_add(&desc->desc_node, &pch->freelist);
-+ pch->descs_allocated++;
-+ }
-+
-+ return pch->descs_allocated ? 0 : -ENOMEM;
-+}
-+
-+static void pdca_free_chan_resources(struct dma_chan *chan)
-+{
-+ struct pdca_chan *pch = dma_to_pdca_chan(chan);
-+ struct pdca_dev *pdca = dma_to_pdca_dev(chan->device);
-+ struct pdca_desc *desc, *_desc;
-+
-+ WARN_ON(!list_empty(&pch->queue));
-+ WARN_ON(pdca_readl(pch->regs, SR) & PDCA_SR_TEN);
-+ WARN_ON(pdca_readl(pch->regs, IMR));
-+
-+ clk_disable(pdca->hclk);
-+ clk_disable(pdca->pclk);
-+ pch->enabled = false;
-+
-+ list_for_each_entry_safe(desc, _desc, &pch->freelist, desc_node) {
-+ list_del(&desc->desc_node);
-+ kfree(desc);
-+ }
-+
-+ pch->descs_allocated = 0;
-+}
-+
-+static void pdca_suspend_channel(struct pdca_dev *pdca, struct pdca_chan *pch)
-+{
-+ void __iomem *regs = pch->regs;
-+
-+ /*
-+ * REVISIT this whole business.
-+ *
-+ * The plan is to ensure that the PDCA doesn't do any bus
-+ * transactions when we're suspended or shut down. Ideally,
-+ * the client should make sure that all transfers have already
-+ * been completed or terminated when we reach suspend_late(),
-+ * but just in case that didn't happen, we should just stop
-+ * the controller and turn it back on when resuming. Hopefully
-+ * it will simply continue where it left off.
-+ *
-+ * We _probably_ need to save some sort of state to make this
-+ * happen. Or we can just rely on interrupts being globally
-+ * disabled at least until we reach resume_early. But that
-+ * might not be the case for shutdown.
-+ */
-+ tasklet_kill(&pch->tasklet);
-+ spin_lock_bh(&pch->lock);
-+ if (pdca_readl(regs, SR) & PDCA_SR_TEN) {
-+ pdca_writel(regs, CR, PDCA_CR_TDIS);
-+ while (pdca_readl(regs, SR) & PDCA_SR_TEN)
-+ cpu_relax();
-+
-+ clk_disable(pdca->hclk);
-+ clk_disable(pdca->pclk);
-+ }
-+ spin_unlock_bh(&pch->lock);
-+}
-+
-+static void __init pdca_init_channel(struct pdca_dev *pdca, unsigned int i)
-+{
-+ struct pdca_chan *pch = &pdca->chan[i];
-+
-+ pch->chan.device = &pdca->dma;
-+ pch->chan.chan_id = i;
-+ pch->regs = pdca->regs + i * PDCA_CHAN_SIZE;
-+ tasklet_init(&pch->tasklet, pdca_chan_tasklet, (unsigned long)pch);
-+ spin_lock_init(&pch->lock);
-+ INIT_LIST_HEAD(&pch->freelist);
-+ INIT_LIST_HEAD(&pch->queue);
-+
-+ list_add_tail(&pch->chan.device_node, &pdca->dma.channels);
-+}
-+
-+static int __init pdca_probe(struct platform_device *pdev)
-+{
-+ struct pdca_pdata *pdata;
-+ struct resource *mmio;
-+ struct pdca_dev *pdca;
-+ size_t mmio_len;
-+ size_t size;
-+ unsigned int i;
-+ int irq;
-+ int ret;
-+
-+ pdata = pdev->dev.platform_data;
-+ mmio = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ irq = platform_get_irq(pdev, 0);
-+ if (!pdata || pdata->nr_channels > 32 || !mmio || !irq) {
-+ dev_dbg(&pdev->dev, "invalid params from platform code\n");
-+ return -EINVAL;
-+ }
-+
-+ mmio_len = mmio->end - mmio->start + 1;
-+ if (!request_mem_region(mmio->start, mmio_len, "atmel_pdca")) {
-+ dev_dbg(&pdev->dev, "mmio resource busy\n");
-+ return -EBUSY;
-+ }
-+
-+ size = sizeof(struct pdca_dev);
-+ size += pdata->nr_channels * sizeof(struct pdca_chan);
-+ pdca = kzalloc(size, GFP_KERNEL);
-+ if (!pdca) {
-+ dev_dbg(&pdev->dev, "insufficient memory\n");
-+ ret = -ENOMEM;
-+ goto err_alloc_pdca;
-+ }
-+
-+ pdca->hclk = clk_get(&pdev->dev, "hclk");
-+ if (IS_ERR(pdca->hclk)) {
-+ dev_dbg(&pdev->dev, "no HSB clock\n");
-+ ret = PTR_ERR(pdca->hclk);
-+ goto err_get_hclk;
-+ }
-+ pdca->pclk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(pdca->pclk)) {
-+ dev_dbg(&pdev->dev, "no PB clock\n");
-+ ret = PTR_ERR(pdca->pclk);
-+ goto err_get_pclk;
-+ }
-+
-+ pdca->regs = ioremap(mmio->start, mmio_len);
-+ if (!pdca->regs) {
-+ dev_dbg(&pdev->dev, "ioremap failed\n");
-+ ret = -ENOMEM;
-+ goto err_ioremap;
-+ }
-+
-+ INIT_LIST_HEAD(&pdca->dma.channels);
-+ for (i = 0; i < pdata->nr_channels; i++, pdca->dma.chancnt++)
-+ pdca_init_channel(pdca, i);
-+
-+ ret = request_irq(irq, pdca_interrupt, 0, pdev->dev.bus_id, pdca);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "request_irq failed\n");
-+ goto err_irq;
-+ }
-+
-+ dma_cap_set(DMA_SLAVE, pdca->dma.cap_mask);
-+ pdca->dma.dev = &pdev->dev;
-+ pdca->dma.device_alloc_chan_resources = pdca_alloc_chan_resources;
-+ pdca->dma.device_free_chan_resources = pdca_free_chan_resources;
-+ pdca->dma.device_prep_slave_sg = pdca_prep_slave_sg;
-+ pdca->dma.device_terminate_all = pdca_terminate_all;
-+ pdca->dma.device_is_tx_complete = pdca_is_tx_complete;
-+ pdca->dma.device_issue_pending = pdca_issue_pending;
-+
-+ platform_set_drvdata(pdev, pdca);
-+ dma_async_device_register(&pdca->dma);
-+
-+ dev_info(&pdev->dev, "Atmel PDCA at 0x%08lx (irq %d) %u channels\n",
-+ (unsigned long)mmio->start, irq, pdca->dma.chancnt);
-+
-+ return 0;
-+
-+err_irq:
-+ iounmap(pdca->regs);
-+err_ioremap:
-+ clk_put(pdca->pclk);
-+err_get_pclk:
-+ clk_put(pdca->hclk);
-+err_get_hclk:
-+ kfree(pdca);
-+err_alloc_pdca:
-+ release_resource(mmio);
-+ return ret;
-+}
-+
-+static int __exit pdca_remove(struct platform_device *pdev)
-+{
-+ struct pdca_dev *pdca = platform_get_drvdata(pdev);
-+ struct pdca_chan *pch;
-+ struct resource *mmio;
-+
-+ list_for_each_entry(pch, &pdca->dma.channels, chan.device_node)
-+ pdca_suspend_channel(pdca, pch);
-+
-+ dma_async_device_unregister(&pdca->dma);
-+ free_irq(platform_get_irq(pdev, 0), pdca);
-+ clk_put(pdca->pclk);
-+ clk_put(pdca->hclk);
-+ iounmap(pdca->regs);
-+ kfree(pdca);
-+
-+ mmio = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ release_resource(mmio);
-+
-+ return 0;
-+}
-+
-+static void pdca_shutdown(struct platform_device *pdev)
-+{
-+ struct pdca_dev *pdca = platform_get_drvdata(pdev);
-+ struct pdca_chan *pch;
-+
-+ list_for_each_entry(pch, &pdca->dma.channels, chan.device_node)
-+ pdca_suspend_channel(pdca, pch);
-+}
-+
-+static int pdca_suspend_late(struct platform_device *pdev, pm_message_t state)
-+{
-+ return 0;
-+}
-+
-+static int pdca_resume_early(struct platform_device *pdev)
-+{
-+ return 0;
-+}
-+
-+static struct platform_driver pdca_driver = {
-+ .remove = __exit_p(pdca_remove),
-+ .shutdown = pdca_shutdown,
-+ .suspend_late = pdca_suspend_late,
-+ .resume_early = pdca_resume_early,
-+ .driver = {
-+ .name = "atmel_pdca",
-+ },
-+};
-+
-+static int __init pdca_init(void)
-+{
-+ return platform_driver_probe(&pdca_driver, pdca_probe);
-+}
-+subsys_initcall(pdca_init);
-+
-+static void __exit pdca_exit(void)
-+{
-+ platform_driver_unregister(&pdca_driver);
-+}
-+module_exit(pdca_exit);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("Atmel PDCA DMA Controller driver");
-+MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>");
-diff -urN linux-2.6.28.2-0rig//drivers/dma/dw_dmac.c linux-2.6.28.2/drivers/dma/dw_dmac.c
---- linux-2.6.28.2-0rig//drivers/dma/dw_dmac.c 2009-01-29 08:39:25.000000000 +0100
-+++ linux-2.6.28.2/drivers/dma/dw_dmac.c 2009-01-29 08:52:50.000000000 +0100
-@@ -545,109 +545,51 @@
- return NULL;
- }
-
--static struct dma_async_tx_descriptor *
--dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
-- unsigned int sg_len, enum dma_data_direction direction,
-- unsigned long flags)
-+static struct dw_desc *dwc_init_slave_descs(struct dw_dma_chan *dwc,
-+ struct scatterlist *sgl, unsigned int sg_len,
-+ u32 ctllo, dma_addr_t src_reg, dma_addr_t dst_reg,
-+ unsigned int reg_width, unsigned long flags)
- {
-- struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
-- struct dw_dma_slave *dws = dwc->dws;
-- struct dw_desc *prev;
-- struct dw_desc *first;
-- u32 ctllo;
-- dma_addr_t reg;
-- unsigned int reg_width;
-- unsigned int mem_width;
-- unsigned int i;
-+ struct dma_chan *chan = &dwc->chan;
- struct scatterlist *sg;
-+ struct dw_desc *desc;
-+ struct dw_desc *first = NULL;
-+ struct dw_desc *prev = NULL;
-+ unsigned int align_mask;
-+ unsigned int i;
- size_t total_len = 0;
-
-- dev_vdbg(&chan->dev, "prep_dma_slave\n");
--
-- if (unlikely(!dws || !sg_len))
-- return NULL;
--
-- reg_width = dws->slave.reg_width;
-- prev = first = NULL;
--
-- sg_len = dma_map_sg(chan->dev.parent, sgl, sg_len, direction);
--
-- switch (direction) {
-- case DMA_TO_DEVICE:
-- ctllo = (DWC_DEFAULT_CTLLO
-- | DWC_CTLL_DST_WIDTH(reg_width)
-- | DWC_CTLL_DST_FIX
-- | DWC_CTLL_SRC_INC
-- | DWC_CTLL_FC_M2P);
-- reg = dws->slave.tx_reg;
-- for_each_sg(sgl, sg, sg_len, i) {
-- struct dw_desc *desc;
-- u32 len;
-- u32 mem;
-+ align_mask = (1 << reg_width) - 1;
-+ for_each_sg(sgl, sg, sg_len, i) {
-+ u32 len;
-+ u32 desc_len;
-+ u32 mem;
-+
-+ mem = sg_phys(sg);
-+ len = sg_dma_len(sg);
-+ total_len += len;
-
-+ while (len) {
-+ desc_len = min(len, DWC_MAX_COUNT << reg_width);
- desc = dwc_desc_get(dwc);
- if (!desc) {
- dev_err(&chan->dev,
- "not enough descriptors available\n");
- goto err_desc_get;
- }
-+ len -= desc_len;
-
-- mem = sg_phys(sg);
-- len = sg_dma_len(sg);
-- mem_width = 2;
-- if (unlikely(mem & 3 || len & 3))
-- mem_width = 0;
--
-- desc->lli.sar = mem;
-- desc->lli.dar = reg;
-- desc->lli.ctllo = ctllo | DWC_CTLL_SRC_WIDTH(mem_width);
-- desc->lli.ctlhi = len >> mem_width;
-+ if (unlikely((mem & align_mask) || (len & align_mask)))
-+ goto err_align;
-
-- if (!first) {
-- first = desc;
-- } else {
-- prev->lli.llp = desc->txd.phys;
-- dma_sync_single_for_device(chan->dev.parent,
-- prev->txd.phys,
-- sizeof(prev->lli),
-- DMA_TO_DEVICE);
-- list_add_tail(&desc->desc_node,
-- &first->txd.tx_list);
-- }
-- prev = desc;
-- total_len += len;
-- }
-- break;
-- case DMA_FROM_DEVICE:
-- ctllo = (DWC_DEFAULT_CTLLO
-- | DWC_CTLL_SRC_WIDTH(reg_width)
-- | DWC_CTLL_DST_INC
-- | DWC_CTLL_SRC_FIX
-- | DWC_CTLL_FC_P2M);
--
-- reg = dws->slave.rx_reg;
-- for_each_sg(sgl, sg, sg_len, i) {
-- struct dw_desc *desc;
-- u32 len;
-- u32 mem;
--
-- desc = dwc_desc_get(dwc);
-- if (!desc) {
-- dev_err(&chan->dev,
-- "not enough descriptors available\n");
-- goto err_desc_get;
-- }
--
-- mem = sg_phys(sg);
-- len = sg_dma_len(sg);
-- mem_width = 2;
-- if (unlikely(mem & 3 || len & 3))
-- mem_width = 0;
--
-- desc->lli.sar = reg;
-- desc->lli.dar = mem;
-- desc->lli.ctllo = ctllo | DWC_CTLL_DST_WIDTH(mem_width);
-- desc->lli.ctlhi = len >> reg_width;
-+ desc->lli.sar = src_reg ? src_reg : mem;
-+ desc->lli.dar = dst_reg ? dst_reg : mem;
-+ desc->lli.ctllo = ctllo;
-+ desc->lli.ctlhi = desc_len >> reg_width;
-+ dev_vdbg(&dwc->chan.dev,
-+ " s%08x d%08x c%08x:%08x\n",
-+ desc->lli.sar, desc->lli.dar,
-+ ctllo, desc_len >> reg_width);
-
- if (!first) {
- first = desc;
-@@ -661,11 +603,8 @@
- &first->txd.tx_list);
- }
- prev = desc;
-- total_len += len;
-+ mem += desc_len;
- }
-- break;
-- default:
-- return NULL;
- }
-
- if (flags & DMA_PREP_INTERRUPT)
-@@ -679,13 +618,69 @@
-
- first->len = total_len;
-
-- return &first->txd;
-+ return first;
-
-+err_align:
-+ dwc_desc_put(dwc, desc);
- err_desc_get:
- dwc_desc_put(dwc, first);
- return NULL;
- }
-
-+static struct dma_async_tx_descriptor *
-+dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
-+ unsigned int sg_len, enum dma_data_direction direction,
-+ unsigned long flags)
-+{
-+ struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
-+ struct dw_dma_slave *dws = dwc->dws;
-+ struct dw_desc *first;
-+ u32 ctllo;
-+ unsigned int reg_width;
-+
-+ dev_vdbg(&chan->dev, "prep_dma_slave: %s %u segments, flags: %lx\n",
-+ direction == DMA_TO_DEVICE ? "OUT" : "IN",
-+ sg_len, flags);
-+
-+ if (unlikely(!dws || !sg_len))
-+ return NULL;
-+
-+ reg_width = dws->slave.reg_width;
-+ sg_len = dma_map_sg(chan->dev.parent, sgl, sg_len, direction);
-+
-+ switch (direction) {
-+ case DMA_TO_DEVICE:
-+ ctllo = (DWC_DEFAULT_CTLLO
-+ | DWC_CTLL_DST_WIDTH(reg_width)
-+ | DWC_CTLL_SRC_WIDTH(reg_width)
-+ | DWC_CTLL_DST_FIX
-+ | DWC_CTLL_SRC_INC
-+ | DWC_CTLL_FC_M2P);
-+ first = dwc_init_slave_descs(dwc, sgl, sg_len, ctllo,
-+ 0, dws->slave.tx_reg, reg_width, flags);
-+ break;
-+ case DMA_FROM_DEVICE:
-+ ctllo = (DWC_DEFAULT_CTLLO
-+ | DWC_CTLL_SRC_WIDTH(reg_width)
-+ | DWC_CTLL_DST_WIDTH(reg_width)
-+ | DWC_CTLL_DST_INC
-+ | DWC_CTLL_SRC_FIX
-+ | DWC_CTLL_FC_P2M);
-+ first = dwc_init_slave_descs(dwc, sgl, sg_len, ctllo,
-+ dws->slave.rx_reg, 0, reg_width, flags);
-+ break;
-+ default:
-+ return NULL;
-+ }
-+
-+ if (unlikely(!first)) {
-+ dma_unmap_sg(chan->dev.parent, sgl, sg_len, direction);
-+ return NULL;
-+ }
-+
-+ return &first->txd;
-+}
-+
- static void dwc_terminate_all(struct dma_chan *chan)
- {
- struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
-@@ -1109,7 +1104,7 @@
- {
- return platform_driver_probe(&dw_driver, dw_probe);
- }
--module_init(dw_init);
-+subsys_initcall(dw_init);
-
- static void __exit dw_exit(void)
- {
-diff -urN linux-2.6.28.2-0rig//drivers/dma/Kconfig linux-2.6.28.2/drivers/dma/Kconfig
---- linux-2.6.28.2-0rig//drivers/dma/Kconfig 2009-01-29 08:39:25.000000000 +0100
-+++ linux-2.6.28.2/drivers/dma/Kconfig 2009-01-29 08:52:50.000000000 +0100
-@@ -38,6 +38,20 @@
- help
- Enable support for the Intel(R) IOP Series RAID engines.
-
-+config ATMEL_PDCA
-+ tristate "Atmel Peripheral DMA Controller A support"
-+ depends on AVR32
-+ select DMA_ENGINE
-+ default y if CPU_AT32AP7200
-+ help
-+ Support the Atmel Peripheral DMA Controller found on AVR32
-+ UC3 chips as well as newer AP7 chips. This controller is
-+ similar to the PDC found on AT32AP7000 and various AT91
-+ chips, but has its own register bank.
-+
-+ This controller only supports peripheral (slave) transfers,
-+ not memory-to-memory transfers.
-+
- config DW_DMAC
- tristate "Synopsys DesignWare AHB DMA support"
- depends on AVR32
-diff -urN linux-2.6.28.2-0rig//drivers/dma/Makefile linux-2.6.28.2/drivers/dma/Makefile
---- linux-2.6.28.2-0rig//drivers/dma/Makefile 2009-01-29 08:39:25.000000000 +0100
-+++ linux-2.6.28.2/drivers/dma/Makefile 2009-01-29 08:52:50.000000000 +0100
-@@ -4,6 +4,7 @@
- obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o
- ioatdma-objs := ioat.o ioat_dma.o ioat_dca.o
- obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
-+obj-$(CONFIG_ATMEL_PDCA) += atmel_pdca.o
- obj-$(CONFIG_FSL_DMA) += fsldma.o
- obj-$(CONFIG_MV_XOR) += mv_xor.o
- obj-$(CONFIG_DW_DMAC) += dw_dmac.o
-diff -urN linux-2.6.28.2-0rig//drivers/mmc/host/atmel-mci-regs.h linux-2.6.28.2/drivers/mmc/host/atmel-mci-regs.h
---- linux-2.6.28.2-0rig//drivers/mmc/host/atmel-mci-regs.h 2009-01-29 08:39:27.000000000 +0100
-+++ linux-2.6.28.2/drivers/mmc/host/atmel-mci-regs.h 2009-01-29 08:52:50.000000000 +0100
-@@ -10,13 +10,21 @@
- #ifndef __DRIVERS_MMC_ATMEL_MCI_H__
- #define __DRIVERS_MMC_ATMEL_MCI_H__
-
--/* MCI Register Definitions */
-+/*
-+ * MCI Register Definitions. Registers and bitfields marked with [2]
-+ * are only available in MCI2.
-+ */
- #define MCI_CR 0x0000 /* Control */
- # define MCI_CR_MCIEN ( 1 << 0) /* MCI Enable */
- # define MCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */
-+# define MCI_CR_PWSEN ( 1 << 2) /* Powersave Enable[2] */
-+# define MCI_CR_PWSDIS ( 1 << 3) /* Powersave Disable[2] */
-+# define MCI_CR_IOWAITEN ( 1 << 4) /* SDIO Read Wait Enable[2] */
-+# define MCI_CR_IOWAITDIS ( 1 << 5) /* SDIO Read Wait Disable[2] */
- # define MCI_CR_SWRST ( 1 << 7) /* Software Reset */
- #define MCI_MR 0x0004 /* Mode */
- # define MCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */
-+# define MCI_MR_PWSDIV(x) ((x) << 8) /* Powersave Divider[2] */
- # define MCI_MR_RDPROOF ( 1 << 11) /* Read Proof */
- # define MCI_MR_WRPROOF ( 1 << 12) /* Write Proof */
- #define MCI_DTOR 0x0008 /* Data Timeout */
-@@ -56,6 +64,9 @@
- #define MCI_BLKR 0x0018 /* Block */
- # define MCI_BCNT(x) ((x) << 0) /* Data Block Count */
- # define MCI_BLKLEN(x) ((x) << 16) /* Data Block Length */
-+#define MCI_CSTOR 0x001c /* Completion Signal Timeout[2] */
-+# define MCI_CSTOCYC(x) ((x) << 0) /* CST cycles */
-+# define MCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */
- #define MCI_RSPR 0x0020 /* Response 0 */
- #define MCI_RSPR1 0x0024 /* Response 1 */
- #define MCI_RSPR2 0x0028 /* Response 2 */
-@@ -66,24 +77,45 @@
- #define MCI_IER 0x0044 /* Interrupt Enable */
- #define MCI_IDR 0x0048 /* Interrupt Disable */
- #define MCI_IMR 0x004c /* Interrupt Mask */
--# define MCI_CMDRDY ( 1 << 0) /* Command Ready */
--# define MCI_RXRDY ( 1 << 1) /* Receiver Ready */
--# define MCI_TXRDY ( 1 << 2) /* Transmitter Ready */
--# define MCI_BLKE ( 1 << 3) /* Data Block Ended */
--# define MCI_DTIP ( 1 << 4) /* Data Transfer In Progress */
--# define MCI_NOTBUSY ( 1 << 5) /* Data Not Busy */
--# define MCI_SDIOIRQA ( 1 << 8) /* SDIO IRQ in slot A */
--# define MCI_SDIOIRQB ( 1 << 9) /* SDIO IRQ in slot B */
--# define MCI_RINDE ( 1 << 16) /* Response Index Error */
--# define MCI_RDIRE ( 1 << 17) /* Response Direction Error */
--# define MCI_RCRCE ( 1 << 18) /* Response CRC Error */
--# define MCI_RENDE ( 1 << 19) /* Response End Bit Error */
--# define MCI_RTOE ( 1 << 20) /* Response Time-Out Error */
--# define MCI_DCRCE ( 1 << 21) /* Data CRC Error */
--# define MCI_DTOE ( 1 << 22) /* Data Time-Out Error */
--# define MCI_OVRE ( 1 << 30) /* RX Overrun Error */
--# define MCI_UNRE ( 1 << 31) /* TX Underrun Error */
-+# define MCI_CMDRDY ( 1 << 0) /* Command Ready */
-+# define MCI_RXRDY ( 1 << 1) /* Receiver Ready */
-+# define MCI_TXRDY ( 1 << 2) /* Transmitter Ready */
-+# define MCI_BLKE ( 1 << 3) /* Data Block Ended */
-+# define MCI_DTIP ( 1 << 4) /* Data Transfer In Progress */
-+# define MCI_NOTBUSY ( 1 << 5) /* Data Not Busy */
-+# define MCI_SDIOIRQA ( 1 << 8) /* SDIO IRQ in slot A */
-+# define MCI_SDIOIRQB ( 1 << 9) /* SDIO IRQ in slot B */
-+# define MCI_RINDE ( 1 << 16) /* Response Index Error */
-+# define MCI_RDIRE ( 1 << 17) /* Response Direction Error */
-+# define MCI_RCRCE ( 1 << 18) /* Response CRC Error */
-+# define MCI_RENDE ( 1 << 19) /* Response End Bit Error */
-+# define MCI_RTOE ( 1 << 20) /* Response Time-Out Error */
-+# define MCI_DCRCE ( 1 << 21) /* Data CRC Error */
-+# define MCI_DTOE ( 1 << 22) /* Data Time-Out Error */
-+# define MCI_OVRE ( 1 << 30) /* RX Overrun Error */
-+# define MCI_UNRE ( 1 << 31) /* TX Underrun Error */
-+#define MCI_DMA 0x0050 /* DMA Configuration[2] */
-+# define MCI_DMA_OFFSET(x) ((x) << 0) /* DMA write buffer offset */
-+# define MCI_DMA_CHKSIZE_1 ( 0 << 5) /* DMA chunk size */
-+# define MCI_DMA_CHKSIZE_4 ( 1 << 5) /* DMA chunk size */
-+# define MCI_DMA_CHKSIZE_8 ( 2 << 5) /* DMA chunk size */
-+# define MCI_DMA_CHKSIZE_16 ( 3 << 5) /* DMA chunk size */
-+# define MCI_DMAEN ( 1 << 8) /* DMA HW handshake enable */
-+#define MCI_CFG 0x0054 /* Configuration[2] */
-+# define MCI_CFG_FIFOMODE ( 1 << 0) /* Start transfer ASAP */
-+# define MCI_CFG_FERRCTRL ( 1 << 4) /* xrun flags clear-on-read */
-+# define MCI_CFG_HSMODE ( 1 << 8) /* Use high-speed signaling */
-+# define MCI_CFG_LSYNC ( 1 << 12) /* Synchronize on last block */
-+#define MCI_WPMR 0x00e4 /* Write Protect Mode[2] */
-+# define MCI_WP_EN ( 1 << 0) /* WP Enable */
-+# define MCI_WP_KEY (0x4d4349 << 8) /* WP Key */
-+#define MCI_WPSR 0x00e8 /* Write Protect Status[2] */
-+# define MCI_GET_WP_VS(x) ((x) & 0x0f)
-+# define MCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff)
-+#define MCI_VERSION 0x00fc /* MCI Core Version[2] */
-+#define MCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */
-
-+/* This is not including the FIFO Aperture on MCI2 */
- #define MCI_REGS_SIZE 0x100
-
- /* Register access macros */
-diff -urN linux-2.6.28.2-0rig//drivers/mmc/host/Kconfig linux-2.6.28.2/drivers/mmc/host/Kconfig
---- linux-2.6.28.2-0rig//drivers/mmc/host/Kconfig 2009-01-29 08:39:27.000000000 +0100
-+++ linux-2.6.28.2/drivers/mmc/host/Kconfig 2009-01-29 08:52:50.000000000 +0100
-@@ -125,6 +125,17 @@
-
- If unsure, say N.
-
-+config MMC_ATMELMCI_DMA
-+ bool "Atmel MCI DMA support (EXPERIMENTAL)"
-+ depends on MMC_ATMELMCI && DMA_ENGINE && EXPERIMENTAL
-+ help
-+ Say Y here to have the Atmel MCI driver use a DMA engine to
-+ do data transfers and thus increase the throughput and
-+ reduce the CPU utilization. Note that this is highly
-+ experimental and may cause the driver to lock up.
-+
-+ If unsure, say N.
-+
- config MMC_IMX
- tristate "Motorola i.MX Multimedia Card Interface support"
- depends on ARCH_IMX
-diff -urN linux-2.6.28.2-0rig//drivers/mtd/nand/atmel_nand.c linux-2.6.28.2/drivers/mtd/nand/atmel_nand.c
---- linux-2.6.28.2-0rig//drivers/mtd/nand/atmel_nand.c 2009-01-29 08:39:27.000000000 +0100
-+++ linux-2.6.28.2/drivers/mtd/nand/atmel_nand.c 2009-01-29 08:52:50.000000000 +0100
-@@ -456,7 +456,7 @@
- platform_set_drvdata(pdev, host);
- atmel_nand_enable(host);
-
-- if (host->board->det_pin) {
-+ if (gpio_is_valid(host->board->det_pin)) {
- if (gpio_get_value(host->board->det_pin)) {
- printk("No SmartMedia card inserted.\n");
- res = ENXIO;
-diff -urN linux-2.6.28.2-0rig//drivers/rtc/Kconfig linux-2.6.28.2/drivers/rtc/Kconfig
---- linux-2.6.28.2-0rig//drivers/rtc/Kconfig 2009-01-29 08:39:30.000000000 +0100
-+++ linux-2.6.28.2/drivers/rtc/Kconfig 2009-01-29 08:52:50.000000000 +0100
-@@ -633,6 +633,22 @@
- will be used. The default of zero is normally OK to use, but
- on some systems other software needs to use that register.
-
-+config RTC_DRV_AVR32_AST
-+ tristate "AVR32 Asynchronous Timer"
-+ depends on AVR32
-+ help
-+ RTC driver for the AVR32 Asynchronous Timers. The AST is a
-+ simple and flexible timer that can be used both as a
-+ high-resolution system timer and an RTC, depending on what
-+ clock source it is running from.
-+
-+ If you say yes here, and add one or more platform_device
-+ called "rtc-ast", those devices will be clocked from a
-+ 32.768 kHz crystal oscillator and used as RTCs.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-ast.
-+
- config RTC_DRV_BFIN
- tristate "Blackfin On-Chip RTC"
- depends on BLACKFIN && !BF561
-diff -urN linux-2.6.28.2-0rig//drivers/rtc/Makefile linux-2.6.28.2/drivers/rtc/Makefile
---- linux-2.6.28.2-0rig//drivers/rtc/Makefile 2009-01-29 08:39:30.000000000 +0100
-+++ linux-2.6.28.2/drivers/rtc/Makefile 2009-01-29 08:52:50.000000000 +0100
-@@ -20,6 +20,7 @@
- obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
- obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
- obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o
-+obj-$(CONFIG_RTC_DRV_AVR32_AST) += rtc-ast.o
- obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o
- obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o
- obj-$(CONFIG_RTC_DRV_DS1216) += rtc-ds1216.o
-diff -urN linux-2.6.28.2-0rig//drivers/rtc/rtc-ast.c linux-2.6.28.2/drivers/rtc/rtc-ast.c
---- linux-2.6.28.2-0rig//drivers/rtc/rtc-ast.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/drivers/rtc/rtc-ast.c 2009-01-29 08:52:50.000000000 +0100
-@@ -0,0 +1,546 @@
-+/*
-+ * An RTC driver for the AVR32 Asynchronous Timer
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/rtc.h>
-+
-+#include <asm/ast_regs.h>
-+
-+/*
-+ * The AST - ASynchronous Timer - is built around a simple cycle
-+ * counter that can be driven from one of four selectable clocks with
-+ * a selectable power-of-two prescaler. It also has two alarms (ALARM0
-+ * and ALARM1) and two periodic event generators (PER0 and PER1). The
-+ * latter can be driven by different tappings of the same prescaler
-+ * that drives the counter.
-+ *
-+ * This driver uses the 32.768 kHz crystal oscillator as a clock
-+ * source and a prescaler that gives a 1 Hz counter frequency. It uses
-+ * ALARM0 to support both "old-school" and "wake" alarms, PER0 to
-+ * support periodic interrupts (PIE) up to 16.384 kHz (at power-of-two
-+ * intervals), and PER1 to support a 1 Hz update interrupt (UIE).
-+ *
-+ * Watchdog interrupts seem to be undocumented and unsupported by
-+ * everyone else, so those are not supported for now.
-+ *
-+ * The AST can wake the system from any sleep mode given that the
-+ * source clock is running. On AT32AP720x, the 32.768 kHz crystal
-+ * oscillator runs in all sleep modes except "static" and "shutdown".
-+ */
-+
-+/* 32768 Hz means up to 60 us for synchronization + a bit of slack */
-+#define AST_SYNC_TIMEOUT_US 100
-+
-+#define AST_CLK_RATE 32768
-+#define AST_1S_PRESCALER 14 /* log2(32768) - 1 */
-+
-+struct rtc_ast {
-+ /* Protects I/O registers */
-+ spinlock_t lock;
-+
-+ struct rtc_device *rtc;
-+ void __iomem *regs;
-+ struct clk *osc32;
-+ struct clk *pclk;
-+};
-+
-+/*
-+ * Because the AST is, well, asynchronous, we must make sure we don't
-+ * write to certain registers while the previous write is being
-+ * synchronized between clock domains. This affects writes to CR, CV,
-+ * SCR, WER, PIRx and ARx. To keep the delays minimal, we always
-+ * synchronize _before_ writes to these registers.
-+ *
-+ * This function is also used to synchronize when changing the clock
-+ * source, using a different bit in the status register.
-+ */
-+static int ast_wait_ready(void __iomem *regs, unsigned int busy_mask)
-+{
-+ unsigned long timeout = AST_SYNC_TIMEOUT_US;
-+
-+ while (ast_readl(regs, SR) & busy_mask) {
-+ udelay(1);
-+ if (--timeout == 0)
-+ return -ETIMEDOUT;
-+ cpu_relax();
-+ }
-+
-+ return 0;
-+}
-+
-+static void rtc_ast_release(struct device *dev)
-+{
-+ struct rtc_ast *ast = dev_get_drvdata(dev);
-+
-+ /* Disable all interrupts */
-+ clk_enable(ast->pclk);
-+ ast_writel(ast->regs, IDR, ~0UL);
-+ clk_disable(ast->pclk);
-+}
-+
-+static int rtc_ast_ioctl(struct device *dev, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ struct rtc_ast *ast = dev_get_drvdata(dev);
-+ int ret = 0;
-+
-+ clk_enable(ast->pclk);
-+
-+ switch (cmd) {
-+ /* REVISIT: Should perhaps verify that irq_task is NULL */
-+ case RTC_AIE_ON:
-+ ast_writel(ast->regs, IER, AST_BIT(ALARM0));
-+ break;
-+ case RTC_AIE_OFF:
-+ ast_writel(ast->regs, IDR, AST_BIT(ALARM0));
-+ break;
-+ case RTC_UIE_ON:
-+ spin_lock_irq(&ast->lock);
-+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ if (!ret) {
-+ ast_writel(ast->regs, SCR, AST_BIT(PER1));
-+ ast_writel(ast->regs, IER, AST_BIT(PER1));
-+ }
-+ spin_unlock_irq(&ast->lock);
-+
-+ break;
-+ case RTC_UIE_OFF:
-+ ast_writel(ast->regs, IDR, AST_BIT(PER1));
-+ break;
-+#if 0
-+ case RTC_PIE_ON:
-+ spin_lock_irq(&ast->lock);
-+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ if (ret)
-+ break;
-+ ast_writel(ast->regs, SCR, AST_BIT(PER0));
-+ spin_unlock_irq(&ast->lock);
-+
-+ ast_writel(ast->regs, IER, AST_BIT(PER0));
-+ break;
-+ case RTC_PIE_OFF:
-+ ast_writel(ast->regs, IDR, AST_BIT(PER1));
-+ break;
-+#endif
-+ default:
-+ ret = -ENOIOCTLCMD;
-+ break;
-+ }
-+
-+ clk_disable(ast->pclk);
-+
-+ return ret;
-+}
-+
-+static int rtc_ast_read_time(struct device *dev, struct rtc_time *tm)
-+{
-+ struct rtc_ast *ast = dev_get_drvdata(dev);
-+
-+ clk_enable(ast->pclk);
-+ rtc_time_to_tm(ast_readl(ast->regs, CV), tm);
-+ clk_disable(ast->pclk);
-+
-+ return 0;
-+}
-+
-+static int rtc_ast_set_mmss(struct device *dev, unsigned long secs)
-+{
-+ struct rtc_ast *ast = dev_get_drvdata(dev);
-+ int ret;
-+
-+ clk_enable(ast->pclk);
-+
-+ spin_lock_irq(&ast->lock);
-+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ if (!ret)
-+ ast_writel(ast->regs, CV, secs);
-+ spin_unlock_irq(&ast->lock);
-+
-+ clk_disable(ast->pclk);
-+
-+ return ret;
-+}
-+
-+static int rtc_ast_set_time(struct device *dev, struct rtc_time *tm)
-+{
-+ unsigned long secs;
-+ int ret;
-+
-+ ret = rtc_tm_to_time(tm, &secs);
-+ if (!ret)
-+ ret = rtc_ast_set_mmss(dev, secs);
-+
-+ return ret;
-+}
-+
-+static int rtc_ast_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+ struct rtc_ast *ast = dev_get_drvdata(dev);
-+
-+ clk_enable(ast->pclk);
-+
-+ spin_lock_irq(&ast->lock);
-+ rtc_time_to_tm(ast_readl(ast->regs, AR0), &alrm->time);
-+ alrm->enabled = !!(ast_readl(ast->regs, IMR) & AST_BIT(ALARM0));
-+ alrm->pending = !!(ast_readl(ast->regs, SR) & AST_BIT(ALARM0));
-+ spin_unlock_irq(&ast->lock);
-+
-+ clk_disable(ast->pclk);
-+
-+ return 0;
-+}
-+
-+static int rtc_ast_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+ struct rtc_ast *ast = dev_get_drvdata(dev);
-+ unsigned long seconds;
-+ int ret;
-+
-+ ret = rtc_tm_to_time(&alrm->time, &seconds);
-+ if (ret)
-+ return ret;
-+
-+ clk_enable(ast->pclk);
-+
-+ /*
-+ * REVISIT: The alarm may trigger before we are done here.
-+ * Who's responsible for handling that?
-+ *
-+ * We don't want to clear the ALARM0 flag before we update AR0
-+ * because the previous value of AR0 might trigger an alarm
-+ * right after we clear the flag.
-+ */
-+ spin_lock_irq(&ast->lock);
-+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ if (ret)
-+ goto unlock;
-+ ast_writel(ast->regs, AR0, seconds);
-+
-+ /* Try to avoid synchronization penalty */
-+ if (ast_readl(ast->regs, SR) & AST_BIT(ALARM0)) {
-+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ if (ret)
-+ goto unlock;
-+ ast_writel(ast->regs, SCR, AST_BIT(ALARM0));
-+ }
-+
-+ if (alrm->enabled)
-+ ast_writel(ast->regs, IER, AST_BIT(ALARM0));
-+
-+unlock:
-+ spin_unlock_irq(&ast->lock);
-+ clk_disable(ast->pclk);
-+
-+ return ret;
-+}
-+
-+static int rtc_ast_proc(struct device *dev, struct seq_file *seq)
-+{
-+ struct rtc_ast *ast = dev_get_drvdata(dev);
-+ u32 imr;
-+
-+ clk_enable(ast->pclk);
-+ imr = ast_readl(ast->regs, IMR);
-+ clk_disable(ast->pclk);
-+
-+ return seq_printf(seq,
-+ "periodic_IRQ\t: %s\n"
-+ "update_IRQ\t: %s\n"
-+ "periodic_freq\t: %d\n",
-+ (imr & AST_BIT(PER0)) ? "yes" : "no",
-+ (imr & AST_BIT(PER1)) ? "yes" : "no",
-+ ast->rtc->irq_freq);
-+}
-+
-+static int rtc_ast_irq_set_freq(struct device *dev, int freq)
-+{
-+ struct rtc_ast *ast = dev_get_drvdata(dev);
-+ unsigned int pres_bit;
-+ int ret;
-+
-+ /* RTC core currently ensures this. */
-+ BUG_ON(!freq);
-+
-+ pres_bit = __ffs(freq);
-+ if (pres_bit > AST_1S_PRESCALER)
-+ return -EINVAL;
-+ pres_bit = AST_1S_PRESCALER - pres_bit;
-+
-+ clk_enable(ast->pclk);
-+
-+ spin_lock_irq(&ast->lock);
-+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ if (ret)
-+ goto unlock;
-+
-+ ast_writel(ast->regs, PIR0, pres_bit);
-+
-+unlock:
-+ spin_unlock_irq(&ast->lock);
-+ clk_disable(ast->pclk);
-+
-+ return ret;
-+}
-+
-+static int rtc_ast_irq_set_state(struct device *dev, int enabled)
-+{
-+ struct rtc_ast *ast = dev_get_drvdata(dev);
-+ int ret = 0;
-+
-+ clk_enable(ast->pclk);
-+
-+ if (enabled) {
-+ spin_lock_irq(&ast->lock);
-+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ if (!ret) {
-+ ast_writel(ast->regs, SCR, AST_BIT(PER0));
-+ ast_writel(ast->regs, IER, AST_BIT(PER0));
-+ }
-+ spin_unlock_irq(&ast->lock);
-+ } else {
-+ ast_writel(ast->regs, IDR, AST_BIT(PER1));
-+ }
-+
-+ clk_disable(ast->pclk);
-+
-+ return ret;
-+}
-+
-+static const struct rtc_class_ops rtc_ast_ops = {
-+ .release = rtc_ast_release,
-+ .ioctl = rtc_ast_ioctl,
-+ .read_time = rtc_ast_read_time,
-+ .set_time = rtc_ast_set_time,
-+ .read_alarm = rtc_ast_read_alarm,
-+ .set_alarm = rtc_ast_set_alarm,
-+ .proc = rtc_ast_proc,
-+ .set_mmss = rtc_ast_set_mmss,
-+ .irq_set_freq = rtc_ast_irq_set_freq,
-+ .irq_set_state = rtc_ast_irq_set_state,
-+};
-+
-+static irqreturn_t rtc_ast_interrupt(int irq, void *dev_id)
-+{
-+ struct rtc_ast *ast = dev_id;
-+ unsigned long events;
-+ unsigned long num;
-+ u32 status;
-+ u32 pending;
-+ irqreturn_t ret = IRQ_NONE;
-+
-+ clk_enable(ast->pclk);
-+ spin_lock(&ast->lock);
-+
-+ status = ast_readl(ast->regs, SR);
-+ pending = status & ast_readl(ast->regs, IMR);
-+ if (unlikely(!pending))
-+ goto out;
-+
-+ ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ ast_writel(ast->regs, SCR, pending);
-+
-+ events = RTC_IRQF;
-+ num = 0;
-+ if (pending & AST_BIT(ALARM0)) {
-+ num++;
-+ events |= RTC_AF;
-+ }
-+ if (pending & AST_BIT(PER0)) {
-+ num++;
-+ events |= RTC_PF;
-+ }
-+ if (pending & AST_BIT(PER1)) {
-+ num++;
-+ events |= RTC_UF;
-+ }
-+
-+ rtc_update_irq(ast->rtc, num, events);
-+ ret = IRQ_HANDLED;
-+
-+out:
-+ spin_unlock(&ast->lock);
-+ clk_disable(ast->pclk);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init rtc_ast_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs;
-+ struct rtc_ast *ast;
-+ int irq;
-+ int ret;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_dbg(&pdev->dev, "no mmio resource\n");
-+ return -ENXIO;
-+ }
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_dbg(&pdev->dev, "no irq\n");
-+ return -ENXIO;
-+ }
-+
-+ ast = kzalloc(sizeof(struct rtc_ast), GFP_KERNEL);
-+ if (!ast) {
-+ dev_dbg(&pdev->dev, "out of memory\n");
-+ return -ENOMEM;
-+ }
-+
-+ ast->osc32 = clk_get(NULL, "osc32k");
-+ if (IS_ERR(ast->osc32)) {
-+ ret = PTR_ERR(ast->osc32);
-+ dev_dbg(&pdev->dev, "no 32 kHz oscillator\n");
-+ goto err_osc32;
-+ }
-+
-+ ast->pclk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(ast->pclk)) {
-+ ret = PTR_ERR(ast->pclk);
-+ dev_dbg(&pdev->dev, "no peripheral clock\n");
-+ goto err_pclk;
-+ }
-+
-+ spin_lock_init(&ast->lock);
-+
-+ ast->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!ast->regs) {
-+ dev_dbg(&pdev->dev, "failed to map registers\n");
-+ ret = -ENOMEM;
-+ goto err_ioremap;
-+ }
-+
-+ clk_enable(ast->osc32);
-+ clk_enable(ast->pclk);
-+
-+ /* Initialize the AST if it isn't running already */
-+ if (!(ast_readl(ast->regs, CR) & AST_BIT(CR_EN))) {
-+ ast_wait_ready(ast->regs, AST_BIT(CLK_BUSY));
-+ ast_writel(ast->regs, CLOCK,
-+ AST_BF(CLOCK_CSSEL, AST_CLOCK_OSC32)
-+ | AST_BIT(CLOCK_CEN));
-+ ret = ast_wait_ready(ast->regs, AST_BIT(CLK_BUSY));
-+ if (ret) {
-+ dev_dbg(&pdev->dev,
-+ "timed out selecting clock source\n");
-+ goto err_clksel;
-+ }
-+ ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ ast_writel(ast->regs, CV, 0);
-+ ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ ast_writel(ast->regs, CR, AST_BIT(CR_EN) | AST_BIT(CR_PCLR)
-+ | AST_BF(CR_PSEL, AST_1S_PRESCALER));
-+ }
-+
-+ ast_writel(ast->regs, IDR, ~0UL);
-+ ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ ast_writel(ast->regs, WER, 0);
-+ ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ ast_writel(ast->regs, PIR0, AST_1S_PRESCALER);
-+ ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ ast_writel(ast->regs, PIR1, AST_1S_PRESCALER);
-+
-+ ret = request_irq(irq, rtc_ast_interrupt, 0, "rtc-ast", ast);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "could not request irq %d\n", irq);
-+ goto err_request_irq;
-+ }
-+
-+ ast->rtc = rtc_device_register("rtc-ast", &pdev->dev,
-+ &rtc_ast_ops, THIS_MODULE);
-+ if (IS_ERR(ast->rtc)) {
-+ dev_dbg(&pdev->dev, "could not register rtc device\n");
-+ ret = PTR_ERR(ast->rtc);
-+ goto err_register;
-+ }
-+
-+ ast->rtc->max_user_freq = AST_CLK_RATE / 2;
-+ ast->rtc->irq_freq = 1;
-+
-+ ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ clk_disable(ast->pclk);
-+ platform_set_drvdata(pdev, ast);
-+ device_init_wakeup(&pdev->dev, 1);
-+
-+ dev_info(&pdev->dev, "AVR32 Asynchronous Timer at %08lx irq %d\n",
-+ (unsigned long)regs->start, irq);
-+
-+ return 0;
-+
-+err_register:
-+ free_irq(irq, ast);
-+err_request_irq:
-+err_clksel:
-+ clk_disable(ast->pclk);
-+ clk_disable(ast->osc32);
-+ iounmap(ast->regs);
-+err_ioremap:
-+ clk_put(ast->pclk);
-+err_pclk:
-+ clk_put(ast->osc32);
-+err_osc32:
-+ kfree(ast);
-+ return ret;
-+}
-+
-+static int __exit rtc_ast_remove(struct platform_device *pdev)
-+{
-+ struct rtc_ast *ast = platform_get_drvdata(pdev);
-+
-+ device_init_wakeup(&pdev->dev, 0);
-+
-+ clk_enable(ast->pclk);
-+ ast_writel(ast->regs, IDR, ~0UL);
-+ ast_readl(ast->regs, IMR);
-+ clk_disable(ast->pclk);
-+
-+ free_irq(platform_get_irq(pdev, 0), ast);
-+ rtc_device_unregister(ast->rtc);
-+ clk_disable(ast->osc32);
-+ iounmap(ast->regs);
-+ clk_put(ast->pclk);
-+ clk_put(ast->osc32);
-+ kfree(ast);
-+
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver rtc_ast_driver = {
-+ .remove = __exit_p(rtc_ast_remove),
-+ .driver = {
-+ .name = "rtc-ast",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init rtc_ast_init(void)
-+{
-+ return platform_driver_probe(&rtc_ast_driver, rtc_ast_probe);
-+}
-+module_init(rtc_ast_init);
-+
-+static void __exit rtc_ast_exit(void)
-+{
-+ platform_driver_unregister(&rtc_ast_driver);
-+}
-+module_exit(rtc_ast_exit);
-+
-+MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("AVR32 Asynchronous Timer RTC");
-+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.28.2-0rig//drivers/spi/atmel_spi.c linux-2.6.28.2/drivers/spi/atmel_spi.c
---- linux-2.6.28.2-0rig//drivers/spi/atmel_spi.c 2009-01-29 08:39:31.000000000 +0100
-+++ linux-2.6.28.2/drivers/spi/atmel_spi.c 2009-01-29 09:29:00.000000000 +0100
-@@ -1,306 +1,445 @@
- /*
- * Driver for Atmel AT32 and AT91 SPI Controllers
- *
-- * Copyright (C) 2006 Atmel Corporation
-+ * Copyright (C) 2006-2008 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
--#include <linux/kernel.h>
--#include <linux/init.h>
- #include <linux/clk.h>
--#include <linux/module.h>
--#include <linux/platform_device.h>
- #include <linux/delay.h>
- #include <linux/dma-mapping.h>
-+#include <linux/dmaengine.h>
- #include <linux/err.h>
-+#include <linux/gpio.h>
-+#include <linux/init.h>
- #include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/wait.h>
-+#include <linux/workqueue.h>
-+#include <linux/spi/atmel_spi.h>
- #include <linux/spi/spi.h>
-
--#include <asm/io.h>
--#include <mach/board.h>
--#include <mach/gpio.h>
- #include <mach/cpu.h>
-
- #include "atmel_spi.h"
-
--/*
-- * The core SPI transfer engine just talks to a register bank to set up
-- * DMA transfers; transfer queue progress is driven by IRQs. The clock
-- * framework provides the base clock, subdivided for each spi_device.
-- *
-- * Newer controllers, marked with "new_1" flag, have:
-- * - CR.LASTXFER
-- * - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero)
-- * - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs)
-- * - SPI_CSRx.CSAAT
-- * - SPI_CSRx.SBCR allows faster clocking
-+#define BUFFER_SIZE PAGE_SIZE
-+#define INVALID_DMA_ADDRESS 0xffffffff
-+#define MAX_SG_SEGS 8
-+
-+/**
-+ * struct atmel_spi - SPI master controller state
-+ * @lock: Spinlock protecting the @queue, @stay and @stopping fields
-+ * as well as the hardware registers.
-+ * @regs: Base address of the hardware registers.
-+ * @wait: Waitqueue used to wait for DMA completion or errors.
-+ * @pending: Number of DMA transfers currently pending.
-+ * @pending_bytes: Number of bytes submitted for DMA but not yet
-+ * accounted for.
-+ * @error: Data transfer error detected by interrupt handler. When this
-+ * is set to a nonzero value, the DMA engine is stopped, @pending
-+ * is set to 0 and @wait is triggered.
-+ * @buffer: Scratch buffer for use when the upper layers didn't provide
-+ * a TX or RX buffer.
-+ * @buffer_dma: DMA address of @buffer.
-+ * @buffer_size: Length of @buffer in bytes.
-+ * @queue: SPI messages queued for transfer.
-+ * @workqueue: Per-controller workqueue.
-+ * @work: Queue processing work struct.
-+ * @stay: If the last SPI message caused the SPI device to stay active,
-+ * this points to the SPI device associated with that message. NULL
-+ * otherwise.
-+ * @clk: Bus clock connected to the controller.
-+ * @base_hz: Base clock rate in Hz used for baud rate calculations.
-+ * @stopping: Queue is being stopped. No new messages are started.
-+ * @always_bounce: Always do transfers to/from bounce buffer.
-+ * @pdev: Platform device associated with the controller.
- */
- struct atmel_spi {
- spinlock_t lock;
--
- void __iomem *regs;
-- int irq;
-- struct clk *clk;
-- struct platform_device *pdev;
-- unsigned new_1:1;
-- struct spi_device *stay;
-
-- u8 stopping;
-- struct list_head queue;
-- struct spi_transfer *current_transfer;
-- unsigned long current_remaining_bytes;
-- struct spi_transfer *next_transfer;
-- unsigned long next_remaining_bytes;
-+ wait_queue_head_t wait;
-+ int pending;
-+ size_t pending_bytes;
-+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
-+ struct scatterlist tx_sg[MAX_SG_SEGS];
-+ struct scatterlist rx_sg[MAX_SG_SEGS];
-+ unsigned int sg_len;
-+ struct dma_async_tx_descriptor *tx_desc;
-+ struct dma_async_tx_descriptor *rx_desc;
-+ struct dma_chan *tx_chan;
-+ struct dma_chan *rx_chan;
-+ struct dma_client rx_client;
-+ struct dma_client tx_client;
-+#endif
-+ int error;
-
- void *buffer;
- dma_addr_t buffer_dma;
-+ size_t buffer_size;
-+
-+ struct list_head queue;
-+ struct workqueue_struct *workqueue;
-+ struct work_struct work;
-+ struct spi_device *stay;
-+ struct clk *clk;
-+ unsigned long base_hz;
-+ bool stopping;
-+ bool always_bounce;
-+
-+ struct platform_device *pdev;
-+#ifdef CONFIG_DEBUG_FS
-+ struct dentry *debugfs_root;
-+#endif
- };
-
--#define BUFFER_SIZE PAGE_SIZE
--#define INVALID_DMA_ADDRESS 0xffffffff
-+/**
-+ * struct atmel_spi_device - Controller-specific per-slave state
-+ * @npcs_pin: GPIO pin ID hooked up to this SPI slave.
-+ * @csr: CSRn register value used when talking to this SPI slave.
-+ */
-+struct atmel_spi_device {
-+ unsigned int npcs_pin;
-+ u32 csr;
-+};
-
- /*
-- * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby
-- * they assume that spi slave device state will not change on deselect, so
-- * that automagic deselection is OK. ("NPCSx rises if no data is to be
-- * transmitted") Not so! Workaround uses nCSx pins as GPIOs; or newer
-- * controllers have CSAAT and friends.
-- *
-- * Since the CSAAT functionality is a bit weird on newer controllers as
-- * well, we use GPIO to control nCSx pins on all controllers, updating
-- * MR.PCS to avoid confusing the controller. Using GPIOs also lets us
-- * support active-high chipselects despite the controller's belief that
-- * only active-low devices/systems exists.
-+ * Version 2 of the SPI controller has
-+ * - CR.LASTXFER
-+ * - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero)
-+ * - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs)
-+ * - SPI_CSRx.CSAAT
-+ * - SPI_CSRx.SBCR allows faster clocking
- *
-- * However, at91rm9200 has a second erratum whereby nCS0 doesn't work
-- * right when driven with GPIO. ("Mode Fault does not allow more than one
-- * Master on Chip Select 0.") No workaround exists for that ... so for
-- * nCS0 on that chip, we (a) don't use the GPIO, (b) can't support CS_HIGH,
-- * and (c) will trigger that first erratum in some cases.
-+ * We can determine the controller version by reading the VERSION
-+ * register, but I haven't checked that it exists on all chips, and
-+ * this is cheaper anyway.
- */
-+static bool atmel_spi_is_v2(void)
-+{
-+ return !cpu_is_at91rm9200();
-+}
-
--static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
-+static bool atmel_spi_xfer_is_last(struct spi_message *msg,
-+ struct spi_transfer *xfer)
- {
-- unsigned gpio = (unsigned) spi->controller_data;
-- unsigned active = spi->mode & SPI_CS_HIGH;
-- u32 mr;
-- int i;
-- u32 csr;
-- u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0;
--
-- /* Make sure clock polarity is correct */
-- for (i = 0; i < spi->master->num_chipselect; i++) {
-- csr = spi_readl(as, CSR0 + 4 * i);
-- if ((csr ^ cpol) & SPI_BIT(CPOL))
-- spi_writel(as, CSR0 + 4 * i, csr ^ SPI_BIT(CPOL));
-- }
-+ return &xfer->transfer_list == msg->transfers.prev;
-+}
-
-- mr = spi_readl(as, MR);
-- mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr);
-+/*-------------------------------------------------------------------------*/
-
-- dev_dbg(&spi->dev, "activate %u%s, mr %08x\n",
-- gpio, active ? " (high)" : "",
-- mr);
-+/*
-+ * GCC doesn't eliminate _all_ the dead code, only some of it. In
-+ * particular, the file operations appear to be difficult even if the
-+ * file operations struct itself gets eliminated.
-+ *
-+ * So let's do the CPP dance.
-+ */
-+#ifdef CONFIG_DEBUG_FS
-
-- if (!(cpu_is_at91rm9200() && spi->chip_select == 0))
-- gpio_set_value(gpio, active);
-- spi_writel(as, MR, mr);
--}
-+#include <linux/debugfs.h>
-+#include <linux/seq_file.h>
-
--static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
-+static int atmel_spi_queue_show(struct seq_file *s, void *v)
- {
-- unsigned gpio = (unsigned) spi->controller_data;
-- unsigned active = spi->mode & SPI_CS_HIGH;
-- u32 mr;
-+ struct atmel_spi *as = s->private;
-+ struct spi_message *msg;
-+ struct spi_transfer *xfer;
-
-- /* only deactivate *this* device; sometimes transfers to
-- * another device may be active when this routine is called.
-- */
-- mr = spi_readl(as, MR);
-- if (~SPI_BFEXT(PCS, mr) & (1 << spi->chip_select)) {
-- mr = SPI_BFINS(PCS, 0xf, mr);
-- spi_writel(as, MR, mr);
-+ spin_lock_irq(&as->lock);
-+ list_for_each_entry(msg, &as->queue, queue) {
-+ seq_printf(s, "msg to %s:%s DMA mapped, status %d actual %u\n",
-+ msg->spi->dev.bus_id,
-+ msg->is_dma_mapped ? "" : " Not",
-+ msg->status, msg->actual_length);
-+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
-+ seq_printf(s, " t%p r%p l%u%s %u bits %u us %u Hz\n",
-+ xfer->tx_buf, xfer->rx_buf, xfer->len,
-+ xfer->cs_change ? "cs_change" : "",
-+ xfer->bits_per_word,
-+ xfer->delay_usecs,
-+ xfer->speed_hz);
-+ }
- }
-+ spin_unlock_irq(&as->lock);
-
-- dev_dbg(&spi->dev, "DEactivate %u%s, mr %08x\n",
-- gpio, active ? " (low)" : "",
-- mr);
--
-- if (!(cpu_is_at91rm9200() && spi->chip_select == 0))
-- gpio_set_value(gpio, !active);
-+ return 0;
- }
-
--static inline int atmel_spi_xfer_is_last(struct spi_message *msg,
-- struct spi_transfer *xfer)
-+static int atmel_spi_queue_open(struct inode *inode, struct file *file)
- {
-- return msg->transfers.prev == &xfer->transfer_list;
-+ return single_open(file, atmel_spi_queue_show, inode->i_private);
- }
-
--static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer)
-+static const struct file_operations atmel_spi_queue_fops = {
-+ .owner = THIS_MODULE,
-+ .open = atmel_spi_queue_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = single_release,
-+};
-+
-+static void atmel_spi_show_status_reg(struct seq_file *s,
-+ const char *regname, u32 value)
- {
-- return xfer->delay_usecs == 0 && !xfer->cs_change;
-+ static const char *sr_bit[] = {
-+ [0] = "RDRF",
-+ [1] = "TDRE",
-+ [2] = "MODF",
-+ [3] = "OVRES",
-+ [4] = "ENDRX",
-+ [5] = "ENDTX",
-+ [6] = "RXBUFF",
-+ [7] = "TXBUFE",
-+ [8] = "NSSR",
-+ [9] = "TXEMPTY",
-+ [16] = "SPIENS",
-+ };
-+ unsigned int i;
-+
-+ seq_printf(s, "%s:\t0x%08x", regname, value);
-+ for (i = 0; i < ARRAY_SIZE(sr_bit); i++) {
-+ if (value & (1 << i)) {
-+ if (sr_bit[i])
-+ seq_printf(s, " %s", sr_bit[i]);
-+ else
-+ seq_printf(s, " UNKNOWN(%u)", i);
-+ }
-+ }
-+ seq_putc(s, '\n');
- }
-
--static void atmel_spi_next_xfer_data(struct spi_master *master,
-- struct spi_transfer *xfer,
-- dma_addr_t *tx_dma,
-- dma_addr_t *rx_dma,
-- u32 *plen)
-+static int atmel_spi_regs_show(struct seq_file *s, void *v)
- {
-- struct atmel_spi *as = spi_master_get_devdata(master);
-- u32 len = *plen;
-+ struct atmel_spi *as = s->private;
-+ unsigned int i;
-+ u32 value;
-+ u32 *buf;
-+
-+ buf = kmalloc(0x200, GFP_KERNEL);
-+ if (!buf)
-+ return -ENOMEM;
-
-- /* use scratch buffer only when rx or tx data is unspecified */
-- if (xfer->rx_buf)
-- *rx_dma = xfer->rx_dma + xfer->len - len;
-- else {
-- *rx_dma = as->buffer_dma;
-- if (len > BUFFER_SIZE)
-- len = BUFFER_SIZE;
-- }
-- if (xfer->tx_buf)
-- *tx_dma = xfer->tx_dma + xfer->len - len;
-- else {
-- *tx_dma = as->buffer_dma;
-- if (len > BUFFER_SIZE)
-- len = BUFFER_SIZE;
-- memset(as->buffer, 0, len);
-- dma_sync_single_for_device(&as->pdev->dev,
-- as->buffer_dma, len, DMA_TO_DEVICE);
-+ /* Grab a more or less consistent snapshot */
-+ spin_lock_irq(&as->lock);
-+ memcpy_fromio(buf, as->regs, 0x200);
-+ spin_unlock_irq(&as->lock);
-+
-+ value = buf[SPI_MR / 4];
-+ seq_printf(s, "MR:\t0x%08x%s%s%s%s%s%s PCS=%x DLYBCS=%u\n",
-+ value,
-+ (value & SPI_BIT(MSTR)) ? " MSTR" : "",
-+ (value & SPI_BIT(PS)) ? " PS" : "",
-+ (value & SPI_BIT(PCSDEC)) ? " PCSDEC" : "",
-+ (value & SPI_BIT(FDIV)) ? " FDIV" : "",
-+ (value & SPI_BIT(MODFDIS)) ? " MODFDIS" : "",
-+ (value & SPI_BIT(LLB)) ? " LLB" : "",
-+ SPI_BFEXT(PCS, value),
-+ SPI_BFEXT(DLYBCS, value));
-+
-+ atmel_spi_show_status_reg(s, "SR", buf[SPI_SR / 4]);
-+ atmel_spi_show_status_reg(s, "IMR", buf[SPI_IMR / 4]);
-+
-+ for (i = 0; i < 4; i++) {
-+ value = buf[SPI_CSR0 / 4 + i];
-+ seq_printf(s, "CSR%u:\t0x%08x%s%s%s\n",
-+ i, value,
-+ (value & SPI_BIT(CPOL)) ? " CPOL" : "",
-+ (value & SPI_BIT(NCPHA)) ? " NCPHA" : "",
-+ (value & SPI_BIT(CSAAT)) ? " CSAAT" : "");
-+ seq_printf(s, "\t\tBITS=%u SCBR=%u DLYBS=%u DLYBCT=%u\n",
-+ SPI_BFEXT(BITS, value) + 8,
-+ SPI_BFEXT(SCBR, value),
-+ SPI_BFEXT(DLYBS, value),
-+ SPI_BFEXT(DLYBCT, value));
- }
-
-- *plen = len;
-+ seq_printf(s, "RPR:\t0x%08x\n", buf[SPI_RPR / 4]);
-+ seq_printf(s, "RCR:\t0x%08x\n", buf[SPI_RCR / 4]);
-+ seq_printf(s, "TPR:\t0x%08x\n", buf[SPI_TPR / 4]);
-+ seq_printf(s, "TCR:\t0x%08x\n", buf[SPI_TCR / 4]);
-+ seq_printf(s, "RNPR:\t0x%08x\n", buf[SPI_RNPR / 4]);
-+ seq_printf(s, "RNCR:\t0x%08x\n", buf[SPI_RNCR / 4]);
-+ seq_printf(s, "TNPR:\t0x%08x\n", buf[SPI_TNPR / 4]);
-+ seq_printf(s, "TNCR:\t0x%08x\n", buf[SPI_TNCR / 4]);
-+
-+ value = buf[SPI_PTSR / 4];
-+ seq_printf(s, "PTSR:\t0x%08x%s%s\n", value,
-+ (value & SPI_BIT(RXTEN)) ? " RXTEN" : "",
-+ (value & SPI_BIT(TXTEN)) ? " TXTEN" : "");
-+
-+ kfree(buf);
-+
-+ return 0;
- }
-
--/*
-- * Submit next transfer for DMA.
-- * lock is held, spi irq is blocked
-- */
--static void atmel_spi_next_xfer(struct spi_master *master,
-- struct spi_message *msg)
-+static int atmel_spi_regs_open(struct inode *inode, struct file *file)
- {
-- struct atmel_spi *as = spi_master_get_devdata(master);
-- struct spi_transfer *xfer;
-- u32 len, remaining;
-- u32 ieval;
-- dma_addr_t tx_dma, rx_dma;
--
-- if (!as->current_transfer)
-- xfer = list_entry(msg->transfers.next,
-- struct spi_transfer, transfer_list);
-- else if (!as->next_transfer)
-- xfer = list_entry(as->current_transfer->transfer_list.next,
-- struct spi_transfer, transfer_list);
-- else
-- xfer = NULL;
--
-- if (xfer) {
-- spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
-+ return single_open(file, atmel_spi_regs_show, inode->i_private);
-+}
-
-- len = xfer->len;
-- atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
-- remaining = xfer->len - len;
-+static const struct file_operations atmel_spi_regs_fops = {
-+ .owner = THIS_MODULE,
-+ .open = atmel_spi_regs_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = single_release,
-+};
-
-- spi_writel(as, RPR, rx_dma);
-- spi_writel(as, TPR, tx_dma);
-+static void atmel_spi_init_debugfs(struct atmel_spi *as)
-+{
-+ struct dentry *root;
-+ struct dentry *node;
-
-- if (msg->spi->bits_per_word > 8)
-- len >>= 1;
-- spi_writel(as, RCR, len);
-- spi_writel(as, TCR, len);
-+ root = debugfs_create_dir(as->pdev->dev.bus_id, NULL);
-+ if (IS_ERR(root))
-+ /* Debugfs not enabled */
-+ return;
-+ if (!root)
-+ /* Debugfs enabled, but failed to create directory */
-+ goto err_root;
-+
-+ node = debugfs_create_file("regs", S_IRUSR, root, as,
-+ &atmel_spi_regs_fops);
-+ if (!node)
-+ goto err;
-+ node = debugfs_create_file("queue", S_IRUSR, root, as,
-+ &atmel_spi_queue_fops);
-+ if (!node)
-+ goto err;
-+
-+ as->debugfs_root = root;
-+ return;
-+
-+err:
-+ debugfs_remove_recursive(root);
-+err_root:
-+ dev_err(&as->pdev->dev, "failed to initialize debugfs\n");
-+}
-
-- dev_dbg(&msg->spi->dev,
-- " start xfer %p: len %u tx %p/%08x rx %p/%08x\n",
-- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
-- xfer->rx_buf, xfer->rx_dma);
-- } else {
-- xfer = as->next_transfer;
-- remaining = as->next_remaining_bytes;
-- }
-+static void atmel_spi_cleanup_debugfs(struct atmel_spi *as)
-+{
-+ debugfs_remove_recursive(as->debugfs_root);
-+}
-
-- as->current_transfer = xfer;
-- as->current_remaining_bytes = remaining;
-+#else
-+static void atmel_spi_init_debugfs(struct atmel_spi *as)
-+{
-
-- if (remaining > 0)
-- len = remaining;
-- else if (!atmel_spi_xfer_is_last(msg, xfer)
-- && atmel_spi_xfer_can_be_chained(xfer)) {
-- xfer = list_entry(xfer->transfer_list.next,
-- struct spi_transfer, transfer_list);
-- len = xfer->len;
-- } else
-- xfer = NULL;
-+}
-+static void atmel_spi_cleanup_debugfs(struct atmel_spi *as)
-+{
-
-- as->next_transfer = xfer;
-+}
-+#endif
-
-- if (xfer) {
-- u32 total;
-+/*
-+ * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby
-+ * they assume that spi slave device state will not change on deselect, so
-+ * that automagic deselection is OK. ("NPCSx rises if no data is to be
-+ * transmitted") Not so! Workaround uses nCSx pins as GPIOs; or newer
-+ * controllers have CSAAT and friends.
-+ *
-+ * Since the CSAAT functionality is a bit weird on newer controllers as
-+ * well, we use GPIO to control nCSx pins on all controllers, updating
-+ * MR.PCS to avoid confusing the controller. Using GPIOs also lets us
-+ * support active-high chipselects despite the controller's belief that
-+ * only active-low devices/systems exists.
-+ *
-+ * However, at91rm9200 has a second erratum whereby nCS0 doesn't work
-+ * right when driven with GPIO. ("Mode Fault does not allow more than one
-+ * Master on Chip Select 0.") No workaround exists for that ... so for
-+ * nCS0 on that chip, we (a) don't use the GPIO, (b) can't support CS_HIGH,
-+ * and (c) will trigger that first erratum in some cases.
-+ *
-+ * TODO: Test if the atmel_spi_is_v2() branch below works on
-+ * AT91RM9200 if we use some other register than CSR0. However, don't
-+ * do this unconditionally since AP7000 has an errata where the BITS
-+ * field in CSR0 overrides all other CSRs.
-+ */
-
-- total = len;
-- atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
-- as->next_remaining_bytes = total - len;
-+static void atmel_spi_set_csr(struct atmel_spi *as,
-+ struct spi_device *spi, u32 csr)
-+{
-+ if (atmel_spi_is_v2())
-+ spi_writel(as, CSR0, csr);
-+ else
-+ spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
-+}
-
-- spi_writel(as, RNPR, rx_dma);
-- spi_writel(as, TNPR, tx_dma);
-+static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
-+{
-+ struct atmel_spi_device *asd = spi->controller_state;
-+ unsigned active = spi->mode & SPI_CS_HIGH;
-
-- if (msg->spi->bits_per_word > 8)
-- len >>= 1;
-- spi_writel(as, RNCR, len);
-- spi_writel(as, TNCR, len);
-+ if (atmel_spi_is_v2()) {
-+ /*
-+ * Always use CSR0. This ensures that the clock
-+ * switches to the correct idle polarity before we
-+ * toggle the CS.
-+ */
-+ atmel_spi_set_csr(as, spi, asd->csr);
-+ spi_writel(as, MR, SPI_BF(PCS, 0x0e) | SPI_BIT(MODFDIS)
-+ | SPI_BIT(MSTR));
-+ spi_readl(as, MR);
-+ dev_vdbg(&spi->dev, "activate %u%s, csr0: %08x\n",
-+ asd->npcs_pin, active ? " (low)" : "",
-+ asd->csr);
-
-- dev_dbg(&msg->spi->dev,
-- " next xfer %p: len %u tx %p/%08x rx %p/%08x\n",
-- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
-- xfer->rx_buf, xfer->rx_dma);
-- ieval = SPI_BIT(ENDRX) | SPI_BIT(OVRES);
-+ gpio_set_value(asd->npcs_pin, active);
- } else {
-- spi_writel(as, RNCR, 0);
-- spi_writel(as, TNCR, 0);
-- ieval = SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) | SPI_BIT(OVRES);
-- }
-+ u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0;
-+ int i;
-+ u32 mr;
-+ u32 csr;
-+
-+ /* Make sure clock polarity is correct */
-+ for (i = 0; i < spi->master->num_chipselect; i++) {
-+ csr = spi_readl(as, CSR0 + 4 * i);
-+ if ((csr ^ cpol) & SPI_BIT(CPOL))
-+ spi_writel(as, CSR0 + 4 * i,
-+ csr ^ SPI_BIT(CPOL));
-+ }
-
-- /* REVISIT: We're waiting for ENDRX before we start the next
-- * transfer because we need to handle some difficult timing
-- * issues otherwise. If we wait for ENDTX in one transfer and
-- * then starts waiting for ENDRX in the next, it's difficult
-- * to tell the difference between the ENDRX interrupt we're
-- * actually waiting for and the ENDRX interrupt of the
-- * previous transfer.
-- *
-- * It should be doable, though. Just not now...
-- */
-- spi_writel(as, IER, ieval);
-- spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
-+ mr = spi_readl(as, MR);
-+ mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr);
-+ dev_vdbg(&spi->dev, "activate %u%s, mr: %08x csr: %08x\n",
-+ asd->npcs_pin, active ? " (low)" : "",
-+ mr, csr);
-+ if (spi->chip_select != 0)
-+ gpio_set_value(asd->npcs_pin, active);
-+ spi_writel(as, MR, mr);
-+ }
- }
-
--static void atmel_spi_next_message(struct spi_master *master)
-+static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
- {
-- struct atmel_spi *as = spi_master_get_devdata(master);
-- struct spi_message *msg;
-- struct spi_device *spi;
--
-- BUG_ON(as->current_transfer);
--
-- msg = list_entry(as->queue.next, struct spi_message, queue);
-- spi = msg->spi;
-+ struct atmel_spi_device *asd = spi->controller_state;
-+ unsigned active = spi->mode & SPI_CS_HIGH;
-+ u32 mr;
-
-- dev_dbg(master->dev.parent, "start message %p for %s\n",
-- msg, spi->dev.bus_id);
-+ /* only deactivate *this* device; sometimes transfers to
-+ * another device may be active when this routine is called.
-+ */
-+ mr = spi_readl(as, MR);
-+ if (~SPI_BFEXT(PCS, mr) & (1 << spi->chip_select)) {
-+ mr = SPI_BFINS(PCS, 0xf, mr);
-+ spi_writel(as, MR, mr);
-+ }
-
-- /* select chip if it's not still active */
-- if (as->stay) {
-- if (as->stay != spi) {
-- cs_deactivate(as, as->stay);
-- cs_activate(as, spi);
-- }
-- as->stay = NULL;
-- } else
-- cs_activate(as, spi);
-+ dev_vdbg(&spi->dev, "DEactivate %u%s, mr %08x\n",
-+ asd->npcs_pin, active ? " (low)" : "",
-+ mr);
-
-- atmel_spi_next_xfer(master, msg);
-+ if (atmel_spi_is_v2() || spi->chip_select != 0)
-+ gpio_set_value(asd->npcs_pin, !active);
- }
-
- /*
-@@ -338,162 +477,460 @@
- return 0;
- }
-
--static void atmel_spi_dma_unmap_xfer(struct spi_master *master,
-+static void atmel_spi_dma_unmap_xfer(struct atmel_spi *as,
- struct spi_transfer *xfer)
- {
- if (xfer->tx_dma != INVALID_DMA_ADDRESS)
-- dma_unmap_single(master->dev.parent, xfer->tx_dma,
-+ dma_unmap_single(&as->pdev->dev, xfer->tx_dma,
- xfer->len, DMA_TO_DEVICE);
- if (xfer->rx_dma != INVALID_DMA_ADDRESS)
-- dma_unmap_single(master->dev.parent, xfer->rx_dma,
-+ dma_unmap_single(&as->pdev->dev, xfer->rx_dma,
- xfer->len, DMA_FROM_DEVICE);
- }
-
--static void
--atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as,
-- struct spi_message *msg, int status, int stay)
-+static void atmel_spi_dma_unmap_msg(struct atmel_spi *as, struct spi_message *msg)
- {
-- if (!stay || status < 0)
-- cs_deactivate(as, msg->spi);
-- else
-- as->stay = msg->spi;
-+ struct spi_transfer *xfer;
-
-- list_del(&msg->queue);
-- msg->status = status;
-+ if (!msg->is_dma_mapped)
-+ list_for_each_entry(xfer, &msg->transfers, transfer_list)
-+ atmel_spi_dma_unmap_xfer(as, xfer);
-+}
-
-- dev_dbg(master->dev.parent,
-- "xfer complete: %u bytes transferred\n",
-- msg->actual_length);
-+static void atmel_spi_handle_error(struct atmel_spi *as,
-+ struct spi_message *msg, int err)
-+{
-+ unsigned int timeout;
-
-- spin_unlock(&as->lock);
-- msg->complete(msg->context);
-- spin_lock(&as->lock);
-+ /* Drain the buffers so that the hardware is ready for a new message */
-+ for (timeout = 1000; timeout; timeout--)
-+ if (spi_readl(as, SR) & SPI_BIT(TXEMPTY))
-+ break;
-+ if (!timeout)
-+ dev_warn(&msg->spi->dev,
-+ "timeout waiting for TXEMPTY");
-+ while (spi_readl(as, SR) & SPI_BIT(RDRF))
-+ spi_readl(as, RDR);
-
-- as->current_transfer = NULL;
-- as->next_transfer = NULL;
-+ /* Clear any overrun happening while cleaning up */
-+ spi_readl(as, SR);
-
-- /* continue if needed */
-- if (list_empty(&as->queue) || as->stopping)
-- spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
-- else
-- atmel_spi_next_message(master);
-+ msg->status = err;
-+ as->error = 0;
- }
-
--static irqreturn_t
--atmel_spi_interrupt(int irq, void *dev_id)
-+#ifdef CONFIG_SPI_ATMEL_HAVE_PDC
-+static int atmel_spi_wait_idle(struct atmel_spi *as, struct spi_message *msg)
- {
-- struct spi_master *master = dev_id;
-- struct atmel_spi *as = spi_master_get_devdata(master);
-- struct spi_message *msg;
-- struct spi_transfer *xfer;
-- u32 status, pending, imr;
-- int ret = IRQ_NONE;
-+ int err;
-
-- spin_lock(&as->lock);
-+ wait_event(as->wait, as->pending == 0);
-+ err = as->error;
-+ if (err) {
-+ dev_warn(&msg->spi->dev,
-+ "transfer error %d (%u/%u remaining)\n",
-+ err, spi_readl(as, TCR), spi_readl(as, RCR));
-
-- xfer = as->current_transfer;
-- msg = list_entry(as->queue.next, struct spi_message, queue);
-+ spi_writel(as, TNCR, 0);
-+ spi_writel(as, RNCR, 0);
-+ spi_writel(as, TCR, 0);
-+ spi_writel(as, RCR, 0);
-
-- imr = spi_readl(as, IMR);
-- status = spi_readl(as, SR);
-- pending = status & imr;
-+ atmel_spi_handle_error(as, msg, err);
-
-- if (pending & SPI_BIT(OVRES)) {
-- int timeout;
-+ return err;
-+ }
-
-- ret = IRQ_HANDLED;
-+ msg->actual_length += as->pending_bytes;
-+ as->pending_bytes = 0;
-
-- spi_writel(as, IDR, (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX)
-- | SPI_BIT(OVRES)));
-+ dev_vdbg(&msg->spi->dev, "controller idle, xfered so far: %u\n",
-+ msg->actual_length);
-+
-+ return 0;
-+}
-+
-+static int atmel_spi_submit_xfer(struct atmel_spi *as, struct spi_device *spi,
-+ struct spi_message *msg, struct spi_transfer *xfer)
-+{
-+ unsigned int bits = xfer->bits_per_word;
-+ unsigned int speed_hz = xfer->speed_hz;
-+ unsigned int submitted = 0;
-+ dma_addr_t rx_dma;
-+ dma_addr_t tx_dma;
-+
-+ dev_vdbg(&spi->dev, "submit_xfer len %u rx %p tx %p\n",
-+ xfer->len, xfer->rx_buf, xfer->tx_buf);
-+ dev_vdbg(&spi->dev, " csc %u bpw %u delay %u speed %u\n",
-+ xfer->cs_change, xfer->bits_per_word,
-+ xfer->delay_usecs, xfer->speed_hz);
-+
-+ if (bits || speed_hz) {
-+ struct atmel_spi_device *asd;
-+ u32 csr;
-+
-+ if (atmel_spi_wait_idle(as, msg))
-+ return 0;
-+
-+ asd = spi->controller_state;
-+ csr = asd->csr;
-+
-+ if (bits)
-+ csr = SPI_BFINS(BITS, csr, bits - 8);
-+ if (speed_hz) {
-+ u32 scbr = DIV_ROUND_UP(as->base_hz, speed_hz);
-+ csr = SPI_BFINS(SCBR, csr, scbr);
-+ }
-+
-+ atmel_spi_set_csr(as, spi, csr);
-+ }
-+
-+ if (!bits)
-+ bits = spi->bits_per_word;
-+
-+ /* PDC stuff starts here */
-+ while (submitted < xfer->len) {
-+ unsigned long len;
-+
-+ wait_event(as->wait, as->pending < 2);
-
- /*
-- * When we get an overrun, we disregard the current
-- * transfer. Data will not be copied back from any
-- * bounce buffer and msg->actual_len will not be
-- * updated with the last xfer.
-- *
-- * We will also not process any remaning transfers in
-- * the message.
-- *
-- * First, stop the transfer and unmap the DMA buffers.
-+ * This gives the RX side a slight advantage, making
-+ * overruns less likely.
- */
-- spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
-- if (!msg->is_dma_mapped)
-- atmel_spi_dma_unmap_xfer(master, xfer);
-+ spi_writel(as, PTCR, SPI_BIT(TXTDIS));
-+
-+ len = xfer->len - submitted;
-+ if (xfer->rx_buf) {
-+ rx_dma = xfer->rx_dma + submitted;
-+ } else {
-+ rx_dma = as->buffer_dma;
-+ len = min(len, BUFFER_SIZE);
-+ }
-+ if (xfer->tx_buf) {
-+ tx_dma = xfer->tx_dma + submitted;
-+ } else {
-+ tx_dma = as->buffer_dma;
-+ len = min(len, BUFFER_SIZE);
-+ memset(as->buffer, 0, len);
-+ }
-+
-+ submitted += len;
-+ if (bits > 8)
-+ len >>= 1;
-+
-+ spin_lock_irq(&as->lock);
-+ if (as->error) {
-+ spin_unlock_irq(&as->lock);
-+ atmel_spi_wait_idle(as, msg);
-+ return 0;
-+ }
-+
-+ spi_writel(as, RNPR, rx_dma);
-+ spi_writel(as, RNCR, len);
-+ spi_writel(as, TNPR, tx_dma);
-+ spi_writel(as, TNCR, len);
-+ spi_writel(as, IER, SPI_BIT(RXBUFF) | SPI_BIT(ENDRX)
-+ | SPI_BIT(OVRES));
-+ spi_writel(as, PTCR, SPI_BIT(RXTEN) | SPI_BIT(TXTEN));
-+ as->pending++;
-+ spin_unlock_irq(&as->lock);
-+ }
-
-- /* REVISIT: udelay in irq is unfriendly */
-+ as->pending_bytes += submitted;
-+
-+ if (xfer->delay_usecs || xfer->cs_change || xfer->bits_per_word
-+ || xfer->speed_hz) {
-+ struct atmel_spi_device *asd = spi->controller_state;
-+ int err;
-+
-+ err = atmel_spi_wait_idle(as, msg);
- if (xfer->delay_usecs)
- udelay(xfer->delay_usecs);
-+ atmel_spi_set_csr(as, spi, asd->csr);
-+ if (err)
-+ return 0;
-+
-+ if (xfer->cs_change && !atmel_spi_xfer_is_last(msg, xfer)) {
-+ cs_deactivate(as, spi);
-+ udelay(1);
-+ cs_activate(as, spi);
-+ }
-+ }
-
-- dev_warn(master->dev.parent, "overrun (%u/%u remaining)\n",
-- spi_readl(as, TCR), spi_readl(as, RCR));
-+ return xfer->cs_change;
-+}
-
-- /*
-- * Clean up DMA registers and make sure the data
-- * registers are empty.
-- */
-- spi_writel(as, RNCR, 0);
-- spi_writel(as, TNCR, 0);
-- spi_writel(as, RCR, 0);
-- spi_writel(as, TCR, 0);
-- for (timeout = 1000; timeout; timeout--)
-- if (spi_readl(as, SR) & SPI_BIT(TXEMPTY))
-- break;
-- if (!timeout)
-- dev_warn(master->dev.parent,
-- "timeout waiting for TXEMPTY");
-- while (spi_readl(as, SR) & SPI_BIT(RDRF))
-- spi_readl(as, RDR);
--
-- /* Clear any overrun happening while cleaning up */
-- spi_readl(as, SR);
--
-- atmel_spi_msg_done(master, as, msg, -EIO, 0);
-- } else if (pending & (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX))) {
-- ret = IRQ_HANDLED;
-+#else /* Use DMA engine framework, not PDC */
-
-- spi_writel(as, IDR, pending);
-+static void atmel_spi_dma_complete(void *param)
-+{
-+ struct atmel_spi *as = param;
-
-- if (as->current_remaining_bytes == 0) {
-- msg->actual_length += xfer->len;
-+ as->pending = 0;
-+ as->sg_len = 0;
-+ wake_up(&as->wait);
-+}
-
-- if (!msg->is_dma_mapped)
-- atmel_spi_dma_unmap_xfer(master, xfer);
-+static int atmel_spi_wait_idle(struct atmel_spi *as, struct spi_message *msg)
-+{
-+ struct dma_chan *tx_chan = as->tx_chan;
-+ struct dma_chan *rx_chan = as->rx_chan;
-+ struct dma_device *dma = rx_chan->device;
-+ struct dma_async_tx_descriptor *tx_desc;
-+ struct dma_async_tx_descriptor *rx_desc;
-+ int err;
-+
-+ dev_vdbg(&msg->spi->dev, "wait_idle: sg_len=%u\n", as->sg_len);
-+
-+ if (!as->sg_len)
-+ return 0;
-+
-+ sg_mark_end(as->tx_sg + (as->sg_len - 1));
-+ sg_mark_end(as->rx_sg + (as->sg_len - 1));
-+ as->pending = 1;
-+ smp_wmb();
-+
-+ tx_desc = dma->device_prep_slave_sg(tx_chan,
-+ as->tx_sg, as->sg_len, DMA_TO_DEVICE,
-+ DMA_COMPL_SKIP_SRC_UNMAP | DMA_CTRL_ACK);
-+ rx_desc = dma->device_prep_slave_sg(rx_chan,
-+ as->rx_sg, as->sg_len, DMA_FROM_DEVICE,
-+ DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP
-+ | DMA_CTRL_ACK);
-+ rx_desc->callback = atmel_spi_dma_complete;
-+ rx_desc->callback_param = as;
-+ rx_desc->tx_submit(rx_desc);
-+ tx_desc->tx_submit(tx_desc);
-+ dma->device_issue_pending(rx_chan);
-+ dma->device_issue_pending(tx_chan);
-+
-+ spi_writel(as, IER, SPI_BIT(OVRES));
-+ wait_event(as->wait, !as->pending);
-+ spi_writel(as, IDR, SPI_BIT(OVRES));
-+ err = as->error;
-+ if (err) {
-+ dev_warn(&msg->spi->dev, "transfer error %d\n", err);
-
-- /* REVISIT: udelay in irq is unfriendly */
-- if (xfer->delay_usecs)
-- udelay(xfer->delay_usecs);
--
-- if (atmel_spi_xfer_is_last(msg, xfer)) {
-- /* report completed message */
-- atmel_spi_msg_done(master, as, msg, 0,
-- xfer->cs_change);
-- } else {
-- if (xfer->cs_change) {
-- cs_deactivate(as, msg->spi);
-- udelay(1);
-- cs_activate(as, msg->spi);
-- }
-+ dma->device_terminate_all(tx_chan);
-+ dma->device_terminate_all(rx_chan);
-+
-+ atmel_spi_handle_error(as, msg, err);
-+
-+ return err;
-+ }
-+
-+ msg->actual_length += as->pending_bytes;
-+ as->pending_bytes = 0;
-+ sg_init_table(as->rx_sg, MAX_SG_SEGS);
-+ sg_init_table(as->tx_sg, MAX_SG_SEGS);
-+
-+ dev_vdbg(&msg->spi->dev, "controller idle, xfered so far: %u\n",
-+ msg->actual_length);
-+
-+ return 0;
-+}
-+
-+static int atmel_spi_submit_xfer(struct atmel_spi *as, struct spi_device *spi,
-+ struct spi_message *msg, struct spi_transfer *xfer)
-+{
-+ unsigned int bits = xfer->bits_per_word;
-+ unsigned int speed_hz = xfer->speed_hz;
-+ unsigned int submitted = 0;
-+ unsigned int i;
-+
-+ dev_vdbg(&spi->dev, "submit_xfer len %u rx %p tx %p\n",
-+ xfer->len, xfer->rx_buf, xfer->tx_buf);
-+ dev_vdbg(&spi->dev, " csc %u bpw %u delay %u speed %u\n",
-+ xfer->cs_change, xfer->bits_per_word,
-+ xfer->delay_usecs, xfer->speed_hz);
-+
-+ if (bits || speed_hz) {
-+ struct atmel_spi_device *asd;
-+ u32 csr;
-+
-+ if (atmel_spi_wait_idle(as, msg))
-+ return 0;
-+
-+ asd = spi->controller_state;
-+ csr = asd->csr;
-+
-+ if (bits)
-+ csr = SPI_BFINS(BITS, csr, bits - 8);
-+ if (speed_hz) {
-+ u32 scbr = DIV_ROUND_UP(as->base_hz, speed_hz);
-+ csr = SPI_BFINS(SCBR, csr, scbr);
-+ }
-+
-+ atmel_spi_set_csr(as, spi, csr);
-+ }
-+
-+ if (!bits)
-+ bits = spi->bits_per_word;
-+
-+ i = as->sg_len;
-+ while (submitted < xfer->len) {
-+ unsigned long len;
-+
-+ if (i == MAX_SG_SEGS) {
-+ if (atmel_spi_wait_idle(as, msg))
-+ return 0;
-+ i = 0;
-+ }
-+
-+ len = xfer->len - submitted;
-+ if (!xfer->rx_buf || !xfer->tx_buf)
-+ len = min(len, BUFFER_SIZE);
-+
-+ if (xfer->rx_buf) {
-+ sg_set_buf(&as->rx_sg[i], xfer->rx_buf + submitted, len);
-+ as->rx_sg[i].dma_address = xfer->rx_dma + submitted;
-+ } else {
-+ sg_set_buf(&as->rx_sg[i], as->buffer, len);
-+ as->rx_sg[i].dma_address = as->buffer_dma;
-+ }
-+ if (xfer->tx_buf) {
-+ sg_set_buf(&as->tx_sg[i], xfer->tx_buf + submitted, len);
-+ as->tx_sg[i].dma_address = xfer->tx_dma + submitted;
-+ } else {
-+ sg_set_buf(&as->tx_sg[i], as->buffer, len);
-+ as->tx_sg[i].dma_address = as->buffer_dma;
-+ memset(as->buffer, 0, len);
-+ }
-+
-+ submitted += len;
-+ as->sg_len = ++i;
-+ }
-+
-+ as->pending_bytes += submitted;
-
-- /*
-- * Not done yet. Submit the next transfer.
-- *
-- * FIXME handle protocol options for xfer
-- */
-- atmel_spi_next_xfer(master, msg);
-+ if (xfer->delay_usecs || xfer->cs_change || xfer->bits_per_word
-+ || xfer->speed_hz) {
-+ struct atmel_spi_device *asd = spi->controller_state;
-+ int err;
-+
-+ err = atmel_spi_wait_idle(as, msg);
-+ if (xfer->delay_usecs)
-+ udelay(xfer->delay_usecs);
-+ atmel_spi_set_csr(as, spi, asd->csr);
-+ if (err)
-+ return 0;
-+
-+ if (xfer->cs_change && !atmel_spi_xfer_is_last(msg, xfer)) {
-+ cs_deactivate(as, spi);
-+ udelay(1);
-+ cs_activate(as, spi);
-+ }
-+ }
-+
-+ return xfer->cs_change;
-+}
-+
-+#endif /* PDC vs. DMA engine */
-+
-+static void atmel_spi_work(struct work_struct *work)
-+{
-+ struct atmel_spi *as;
-+
-+ as = container_of(work, struct atmel_spi, work);
-+
-+ spin_lock_irq(&as->lock);
-+ while (!list_empty(&as->queue)) {
-+ struct spi_message *msg;
-+ struct spi_transfer *xfer;
-+ struct spi_device *spi;
-+ int cs_change = 0;
-+
-+ if (as->stopping)
-+ break;
-+
-+ msg = list_entry(as->queue.next, struct spi_message, queue);
-+ spin_unlock_irq(&as->lock);
-+
-+ spi = msg->spi;
-+
-+ if (as->stay) {
-+ if (as->stay != spi) {
-+ cs_deactivate(as, as->stay);
-+ cs_activate(as, spi);
- }
-+ as->stay = NULL;
- } else {
-- /*
-- * Keep going, we still have data to send in
-- * the current transfer.
-- */
-- atmel_spi_next_xfer(master, msg);
-+ cs_activate(as, spi);
-+ }
-+
-+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
-+ sg_init_table(as->rx_sg, MAX_SG_SEGS);
-+ sg_init_table(as->tx_sg, MAX_SG_SEGS);
-+#endif
-+
-+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
-+ if (msg->status != -EINPROGRESS)
-+ break;
-+ cs_change = atmel_spi_submit_xfer(as, spi, msg, xfer);
-+ }
-+
-+ if (msg->status == -EINPROGRESS) {
-+ if (atmel_spi_wait_idle(as, msg))
-+ cs_change = 1;
-+ else
-+ msg->status = 0;
- }
-+ if (!cs_change)
-+ cs_deactivate(as, spi);
-+ else
-+ as->stay = spi;
-+
-+ atmel_spi_dma_unmap_msg(as, msg);
-+
-+ msg->complete(msg->context);
-+ spin_lock_irq(&as->lock);
-+ list_del(&msg->queue);
- }
-+ spin_unlock_irq(&as->lock);
-+}
-+
-+static irqreturn_t atmel_spi_interrupt(int irq, void *dev_id)
-+{
-+ struct atmel_spi *as = dev_id;
-+ u32 status;
-+ u32 mask;
-+ u32 pending;
-+
-+ spin_lock(&as->lock);
-+
-+ status = spi_readl(as, SR);
-+ mask = spi_readl(as, IMR);
-+ pending = status & mask;
-+
-+ if (pending & SPI_BIT(OVRES)) {
-+#ifdef CONFIG_SPI_ATMEL_HAVE_PDC
-+ spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
-+#endif
-+ spi_writel(as, IDR, ~0UL);
-+ as->error = -EIO;
-+ as->pending = 0;
-+#ifdef CONFIG_SPI_ATMEL_HAVE_PDC
-+ } else if (pending & SPI_BIT(RXBUFF)) {
-+ spi_writel(as, IDR, ~0UL);
-+ as->pending = 0;
-+ } else if (pending & SPI_BIT(ENDRX)) {
-+ spi_writel(as, IDR, SPI_BIT(ENDRX));
-+ as->pending--;
-+#endif
-+ } else {
-+ dev_err(&as->pdev->dev,
-+ "unexpected interrupt: SR=0x%08x MR=0x%08x\n",
-+ status, mask);
-+ spi_writel(as, IDR, pending);
-+ }
-+
-+ spi_readl(as, IMR);
-+ wake_up(&as->wait);
-
- spin_unlock(&as->lock);
-
-- return ret;
-+ return IRQ_HANDLED;
- }
-
- /* the spi->mode bits understood by this driver: */
-@@ -502,6 +939,7 @@
- static int atmel_spi_setup(struct spi_device *spi)
- {
- struct atmel_spi *as;
-+ struct atmel_spi_device *asd;
- u32 scbr, csr;
- unsigned int bits = spi->bits_per_word;
- unsigned long bus_hz;
-@@ -536,21 +974,14 @@
- }
-
- /* see notes above re chipselect */
-- if (cpu_is_at91rm9200()
-+ if (!atmel_spi_is_v2()
- && spi->chip_select == 0
- && (spi->mode & SPI_CS_HIGH)) {
- dev_dbg(&spi->dev, "setup: can't be active-high\n");
- return -EINVAL;
- }
-
-- /*
-- * Pre-new_1 chips start out at half the peripheral
-- * bus speed.
-- */
-- bus_hz = clk_get_rate(as->clk);
-- if (!as->new_1)
-- bus_hz /= 2;
--
-+ bus_hz = as->base_hz;
- if (spi->max_speed_hz) {
- /*
- * Calculate the lowest divider that satisfies the
-@@ -589,11 +1020,20 @@
-
- /* chipselect must have been muxed as GPIO (e.g. in board setup) */
- npcs_pin = (unsigned int)spi->controller_data;
-- if (!spi->controller_state) {
-+ asd = spi->controller_state;
-+ if (!asd) {
-+ asd = kzalloc(sizeof(struct atmel_spi_device), GFP_KERNEL);
-+ if (!asd)
-+ return -ENOMEM;
-+
- ret = gpio_request(npcs_pin, spi->dev.bus_id);
-- if (ret)
-+ if (ret) {
-+ kfree(asd);
- return ret;
-- spi->controller_state = (void *)npcs_pin;
-+ }
-+
-+ asd->npcs_pin = npcs_pin;
-+ spi->controller_state = asd;
- gpio_direction_output(npcs_pin, !(spi->mode & SPI_CS_HIGH));
- } else {
- unsigned long flags;
-@@ -605,11 +1045,14 @@
- spin_unlock_irqrestore(&as->lock, flags);
- }
-
-+ asd->csr = csr;
-+
- dev_dbg(&spi->dev,
- "setup: %lu Hz bpw %u mode 0x%x -> csr%d %08x\n",
- bus_hz / scbr, bits, spi->mode, spi->chip_select, csr);
-
-- spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
-+ if (!atmel_spi_is_v2())
-+ spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
-
- return 0;
- }
-@@ -620,74 +1063,81 @@
- struct spi_transfer *xfer;
- unsigned long flags;
- struct device *controller = spi->master->dev.parent;
-+ int ret;
-
- as = spi_master_get_devdata(spi->master);
-
-- dev_dbg(controller, "new message %p submitted for %s\n",
-+ dev_vdbg(controller, "new message %p submitted for %s\n",
- msg, spi->dev.bus_id);
-
- if (unlikely(list_empty(&msg->transfers)
- || !spi->max_speed_hz))
- return -EINVAL;
-
-- if (as->stopping)
-- return -ESHUTDOWN;
--
- list_for_each_entry(xfer, &msg->transfers, transfer_list) {
- if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) {
- dev_dbg(&spi->dev, "missing rx or tx buf\n");
- return -EINVAL;
- }
-
-- /* FIXME implement these protocol options!! */
-- if (xfer->bits_per_word || xfer->speed_hz) {
-- dev_dbg(&spi->dev, "no protocol options yet\n");
-- return -ENOPROTOOPT;
-+ if (xfer->bits_per_word && (xfer->bits_per_word < 8
-+ || xfer->bits_per_word > 16)) {
-+ dev_dbg(&spi->dev, "unsupported bits_per_word\n");
-+ return -EINVAL;
-+ }
-+ if (xfer->speed_hz) {
-+ unsigned long divider;
-+ divider = DIV_ROUND_UP(as->base_hz, xfer->speed_hz);
-+
-+ if (divider > 255) {
-+ dev_dbg(&spi->dev, "speed_hz too low\n");
-+ return -EINVAL;
-+ }
- }
-
- /*
- * DMA map early, for performance (empties dcache ASAP) and
- * better fault reporting. This is a DMA-only driver.
-- *
-- * NOTE that if dma_unmap_single() ever starts to do work on
-- * platforms supported by this driver, we would need to clean
-- * up mappings for previously-mapped transfers.
- */
- if (!msg->is_dma_mapped) {
-- if (atmel_spi_dma_map_xfer(as, xfer) < 0)
-+ if (atmel_spi_dma_map_xfer(as, xfer) < 0) {
-+ /* Ick */
-+ while (xfer->transfer_list.prev != &msg->transfers) {
-+ xfer = list_entry(xfer->transfer_list.prev,
-+ struct spi_transfer,
-+ transfer_list);
-+ atmel_spi_dma_unmap_xfer(as, xfer);
-+ }
-+
- return -ENOMEM;
-+ }
- }
- }
-
--#ifdef VERBOSE
-- list_for_each_entry(xfer, &msg->transfers, transfer_list) {
-- dev_dbg(controller,
-- " xfer %p: len %u tx %p/%08x rx %p/%08x\n",
-- xfer, xfer->len,
-- xfer->tx_buf, xfer->tx_dma,
-- xfer->rx_buf, xfer->rx_dma);
-- }
--#endif
--
- msg->status = -EINPROGRESS;
- msg->actual_length = 0;
-
- spin_lock_irqsave(&as->lock, flags);
-- list_add_tail(&msg->queue, &as->queue);
-- if (!as->current_transfer)
-- atmel_spi_next_message(spi->master);
-+ if (as->stopping) {
-+ ret = -ESHUTDOWN;
-+ } else {
-+ list_add_tail(&msg->queue, &as->queue);
-+ queue_work(as->workqueue, &as->work);
-+ ret = 0;
-+ }
- spin_unlock_irqrestore(&as->lock, flags);
-
-- return 0;
-+ return ret;
- }
-
- static void atmel_spi_cleanup(struct spi_device *spi)
- {
- struct atmel_spi *as = spi_master_get_devdata(spi->master);
-+ struct atmel_spi_device *asd = spi->controller_state;
- unsigned gpio = (unsigned) spi->controller_data;
- unsigned long flags;
-
-- if (!spi->controller_state)
-+ if (!asd)
- return;
-
- spin_lock_irqsave(&as->lock, flags);
-@@ -697,14 +1147,131 @@
- }
- spin_unlock_irqrestore(&as->lock, flags);
-
-+ spi->controller_state = NULL;
- gpio_free(gpio);
-+ kfree(asd);
-+}
-+
-+static void atmel_spi_stop_queue(struct atmel_spi *as)
-+{
-+ struct spi_message *msg;
-+
-+ /*
-+ * Prevent any new messages from being submitted, cancel any
-+ * submitted but not-yet-started messages, and wait for any
-+ * ongoing messages to complete.
-+ */
-+ as->stopping = true;
-+ smp_wmb();
-+ cancel_work_sync(&as->work);
-+
-+ /* Terminate anything that was left over */
-+ list_for_each_entry(msg, &as->queue, queue) {
-+ atmel_spi_dma_unmap_msg(as, msg);
-+ msg->status = -ESHUTDOWN;
-+ msg->complete(msg->context);
-+ }
-+}
-+
-+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
-+static enum dma_state_client atmel_spi_dma_chan_avail(struct atmel_spi *as,
-+ struct dma_chan *chan, struct dma_chan **pchan)
-+{
-+ enum dma_state_client ret = DMA_NAK;
-+
-+ if (!*pchan) {
-+ as->stopping = false;
-+ *pchan = chan;
-+ ret = DMA_ACK;
-+ }
-+
-+ return ret;
-+}
-+
-+static enum dma_state_client atmel_spi_dma_chan_removed(struct atmel_spi *as,
-+ struct dma_chan *chan, struct dma_chan **pchan)
-+{
-+ enum dma_state_client ret = DMA_NAK;
-+
-+ if (chan == *pchan) {
-+ atmel_spi_stop_queue(as);
-+ *pchan = NULL;
-+ ret = DMA_ACK;
-+ }
-+
-+ return ret;
-+}
-+
-+static enum dma_state_client atmel_spi_dma_rx_event(struct dma_client *client,
-+ struct dma_chan *chan, enum dma_state state)
-+{
-+ struct atmel_spi *as;
-+ enum dma_state_client ret = DMA_NAK;
-+
-+ as = container_of(client, struct atmel_spi, rx_client);
-+
-+ switch (state) {
-+ case DMA_RESOURCE_AVAILABLE:
-+ ret = atmel_spi_dma_chan_avail(as, chan, &as->rx_chan);
-+ if (ret == DMA_ACK)
-+ dev_info(&as->pdev->dev,
-+ "Using %s for DMA RX transfers\n",
-+ chan->dev.bus_id);
-+ break;
-+
-+ case DMA_RESOURCE_REMOVED:
-+ ret = atmel_spi_dma_chan_removed(as, chan, &as->rx_chan);
-+ if (ret == DMA_ACK)
-+ dev_info(&as->pdev->dev, "Lost %s, queue stopped\n",
-+ chan->dev.bus_id);
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+static enum dma_state_client atmel_spi_dma_tx_event(struct dma_client *client,
-+ struct dma_chan *chan, enum dma_state state)
-+{
-+ struct atmel_spi *as;
-+ enum dma_state_client ret = DMA_NAK;
-+
-+ as = container_of(client, struct atmel_spi, tx_client);
-+
-+ switch (state) {
-+ case DMA_RESOURCE_AVAILABLE:
-+ ret = atmel_spi_dma_chan_avail(as, chan, &as->tx_chan);
-+ if (ret == DMA_ACK)
-+ dev_info(&as->pdev->dev,
-+ "Using %s for DMA TX transfers\n",
-+ chan->dev.bus_id);
-+ break;
-+
-+ case DMA_RESOURCE_REMOVED:
-+ ret = atmel_spi_dma_chan_removed(as, chan, &as->tx_chan);
-+ if (ret == DMA_ACK)
-+ dev_info(&as->pdev->dev, "Lost %s, queue stopped\n",
-+ chan->dev.bus_id);
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ return ret;
- }
-+#endif
-
- /*-------------------------------------------------------------------------*/
-
- static int __init atmel_spi_probe(struct platform_device *pdev)
- {
- struct resource *regs;
-+ struct resource *buf;
-+ struct atmel_spi_pdata *pdata;
- int irq;
- struct clk *clk;
- int ret;
-@@ -719,6 +1286,14 @@
- if (irq < 0)
- return irq;
-
-+ pdata = pdev->dev.platform_data;
-+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
-+ if (!pdata) {
-+ dev_dbg(&pdev->dev, "no platform data\n");
-+ return -ENXIO;
-+ }
-+#endif
-+
- clk = clk_get(&pdev->dev, "spi_clk");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
-@@ -738,31 +1313,65 @@
-
- as = spi_master_get_devdata(master);
-
-- /*
-- * Scratch buffer is used for throwaway rx and tx data.
-- * It's coherent to minimize dcache pollution.
-- */
-- as->buffer = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE,
-- &as->buffer_dma, GFP_KERNEL);
-- if (!as->buffer)
-- goto out_free;
-+ buf = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+ if (buf) {
-+ as->buffer_dma = buf->start;
-+ as->buffer_size
-+ = rounddown_pow_of_two(buf->end - buf->start + 1);
-+ if (as->buffer_size) {
-+ as->buffer = (void __force *)ioremap(buf->start,
-+ as->buffer_size);
-+ if (as->buffer)
-+ as->always_bounce = true;
-+ }
-+ }
-+
-+ if (!as->buffer) {
-+ /*
-+ * Scratch buffer is used for throwaway rx and tx data.
-+ * It's coherent to minimize dcache pollution.
-+ */
-+ as->buffer = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE,
-+ &as->buffer_dma, GFP_KERNEL);
-+ if (!as->buffer)
-+ goto out_free;
-+ }
-
- spin_lock_init(&as->lock);
-+ init_waitqueue_head(&as->wait);
- INIT_LIST_HEAD(&as->queue);
-+ INIT_WORK(&as->work, atmel_spi_work);
- as->pdev = pdev;
-+ as->clk = clk;
- as->regs = ioremap(regs->start, (regs->end - regs->start) + 1);
- if (!as->regs)
- goto out_free_buffer;
-- as->irq = irq;
-- as->clk = clk;
-- if (!cpu_is_at91rm9200())
-- as->new_1 = 1;
-
-- ret = request_irq(irq, atmel_spi_interrupt, 0,
-- pdev->dev.bus_id, master);
-+ ret = request_irq(irq, atmel_spi_interrupt, 0, pdev->dev.bus_id, as);
- if (ret)
- goto out_unmap_regs;
-
-+ as->workqueue = create_singlethread_workqueue(pdev->dev.bus_id);
-+ if (!as->workqueue)
-+ goto out_free_irq;
-+
-+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
-+ as->rx_client.event_callback = atmel_spi_dma_rx_event;
-+ dma_cap_set(DMA_SLAVE, as->rx_client.cap_mask);
-+ as->rx_client.slave = pdata->rx_dma_slave;
-+ pdata->rx_dma_slave->rx_reg = regs->start + SPI_RDR + 3;
-+
-+ as->tx_client.event_callback = atmel_spi_dma_tx_event;
-+ dma_cap_set(DMA_SLAVE, as->tx_client.cap_mask);
-+ as->tx_client.slave = pdata->tx_dma_slave;
-+ pdata->tx_dma_slave->tx_reg = regs->start + SPI_TDR + 3;
-+
-+ dma_async_client_register(&as->rx_client);
-+ dma_async_client_register(&as->tx_client);
-+ dma_async_client_chan_request(&as->rx_client);
-+ dma_async_client_chan_request(&as->tx_client);
-+#endif
-+
- /* Initialize the hardware */
- clk_enable(clk);
- spi_writel(as, CR, SPI_BIT(SWRST));
-@@ -771,9 +1380,19 @@
- spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
- spi_writel(as, CR, SPI_BIT(SPIEN));
-
-+ /* v1 chips start out at half the peripheral bus speed. */
-+ as->base_hz = clk_get_rate(clk);
-+ if (!atmel_spi_is_v2())
-+ as->base_hz /= 2;
-+
- /* go! */
- dev_info(&pdev->dev, "Atmel SPI Controller at 0x%08lx (irq %d)\n",
- (unsigned long)regs->start, irq);
-+ if (as->always_bounce)
-+ dev_info(&pdev->dev, "Using bounce buffer at 0x%08x len %zu\n",
-+ as->buffer_dma, as->buffer_size);
-+
-+ atmel_spi_init_debugfs(as);
-
- ret = spi_register_master(master);
- if (ret)
-@@ -782,10 +1401,17 @@
- return 0;
-
- out_reset_hw:
-+ atmel_spi_cleanup_debugfs(as);
- spi_writel(as, CR, SPI_BIT(SWRST));
- spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
- clk_disable(clk);
-- free_irq(irq, master);
-+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
-+ dma_async_client_unregister(&as->tx_client);
-+ dma_async_client_unregister(&as->rx_client);
-+#endif
-+ destroy_workqueue(as->workqueue);
-+out_free_irq:
-+ free_irq(irq, as);
- out_unmap_regs:
- iounmap(as->regs);
- out_free_buffer:
-@@ -801,34 +1427,34 @@
- {
- struct spi_master *master = platform_get_drvdata(pdev);
- struct atmel_spi *as = spi_master_get_devdata(master);
-- struct spi_message *msg;
-
-- /* reset the hardware and block queue progress */
-- spin_lock_irq(&as->lock);
-- as->stopping = 1;
-- spi_writel(as, CR, SPI_BIT(SWRST));
-- spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
-- spi_readl(as, SR);
-- spin_unlock_irq(&as->lock);
-+ /* Stop the queue */
-+ atmel_spi_stop_queue(as);
-
-- /* Terminate remaining queued transfers */
-- list_for_each_entry(msg, &as->queue, queue) {
-- /* REVISIT unmapping the dma is a NOP on ARM and AVR32
-- * but we shouldn't depend on that...
-- */
-- msg->status = -ESHUTDOWN;
-- msg->complete(msg->context);
-- }
-+ atmel_spi_cleanup_debugfs(as);
-
-- dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
-- as->buffer_dma);
-+ /* Shut down the hardware */
-+ spi_writel(as, CR, SPI_BIT(SWRST));
-+ spi_readl(as, SR);
-
-+ /* Clean up */
-+ spi_unregister_master(master);
-+ free_irq(platform_get_irq(pdev, 0), as);
-+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
-+ dma_async_client_unregister(&as->tx_client);
-+ dma_async_client_unregister(&as->rx_client);
-+#endif
-+ destroy_workqueue(as->workqueue);
-+ if (as->always_bounce)
-+ iounmap((void __iomem __force *)as->buffer);
-+ else
-+ dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
-+ as->buffer_dma);
-+ iounmap(as->regs);
- clk_disable(as->clk);
- clk_put(as->clk);
-- free_irq(as->irq, master);
-- iounmap(as->regs);
-
-- spi_unregister_master(master);
-+ spi_master_put(master);
-
- return 0;
- }
-@@ -840,7 +1466,9 @@
- struct spi_master *master = platform_get_drvdata(pdev);
- struct atmel_spi *as = spi_master_get_devdata(master);
-
-+ atmel_spi_stop_queue(as);
- clk_disable(as->clk);
-+
- return 0;
- }
-
-@@ -850,6 +1478,9 @@
- struct atmel_spi *as = spi_master_get_devdata(master);
-
- clk_enable(as->clk);
-+ as->stopping = false;
-+ smp_wmb();
-+
- return 0;
- }
-
-@@ -871,7 +1502,12 @@
-
- static int __init atmel_spi_init(void)
- {
-- return platform_driver_probe(&atmel_spi_driver, atmel_spi_probe);
-+ int ret;
-+
-+ ret = platform_driver_probe(&atmel_spi_driver, atmel_spi_probe);
-+ if (ret)
-+ pr_notice("atmel_spi probe failed: %d\n", ret);
-+ return ret;
- }
- module_init(atmel_spi_init);
-
-@@ -882,6 +1518,6 @@
- module_exit(atmel_spi_exit);
-
- MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver");
--MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
--MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>");
-+MODULE_LICENSE("GPL v2");
- MODULE_ALIAS("platform:atmel_spi");
-diff -urN linux-2.6.28.2-0rig//drivers/spi/Kconfig linux-2.6.28.2/drivers/spi/Kconfig
---- linux-2.6.28.2-0rig//drivers/spi/Kconfig 2009-01-29 08:39:31.000000000 +0100
-+++ linux-2.6.28.2/drivers/spi/Kconfig 2009-01-29 08:52:50.000000000 +0100
-@@ -53,9 +53,14 @@
-
- comment "SPI Master Controller Drivers"
-
-+config SPI_ATMEL_HAVE_PDC
-+ def_bool y
-+ depends on (ARCH_AT91 || CPU_AT32AP700X)
-+
- config SPI_ATMEL
- tristate "Atmel SPI Controller"
- depends on (ARCH_AT91 || AVR32)
-+ depends on SPI_ATMEL_HAVE_PDC || DMA_ENGINE
- help
- This selects a driver for the Atmel SPI Controller, present on
- many AT32 (AVR32) and AT91 (ARM) chips.
-diff -urN linux-2.6.28.2-0rig//drivers/usb/host/ehci-avr32.c linux-2.6.28.2/drivers/usb/host/ehci-avr32.c
---- linux-2.6.28.2-0rig//drivers/usb/host/ehci-avr32.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/drivers/usb/host/ehci-avr32.c 2009-01-29 08:52:50.000000000 +0100
-@@ -0,0 +1,213 @@
-+/*
-+ * AVR32 EHCI bus and power management glue
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/platform_device.h>
-+
-+static struct clk *utmi_clk;
-+static struct clk *hclk;
-+
-+static void ehci_avr32_start_clocks(struct device *dev)
-+{
-+ dev_vdbg(dev, "starting clocks...\n");
-+
-+ clk_enable(utmi_clk);
-+ clk_enable(hclk);
-+}
-+
-+static void ehci_avr32_stop_clocks(struct device *dev)
-+{
-+ dev_vdbg(dev, "stopping clocks...\n");
-+
-+ clk_disable(hclk);
-+ clk_disable(utmi_clk);
-+}
-+
-+static int ehci_avr32_setup(struct usb_hcd *hcd)
-+{
-+ struct device *dev = hcd->self.controller;
-+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+ int ret;
-+
-+ ehci_avr32_start_clocks(dev);
-+
-+ ehci->caps = hcd->regs;
-+ ehci->regs = hcd->regs
-+ + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
-+ dbg_hcs_params(ehci, "reset");
-+ dbg_hcc_params(ehci, "reset");
-+
-+ /* cache this readonly data; minimize chip reads */
-+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+
-+ ret = ehci_halt(ehci);
-+ if (ret)
-+ goto err;
-+
-+ /* data structure init */
-+ ret = ehci_init(hcd);
-+ if (ret)
-+ goto err;
-+
-+ ehci->sbrn = 0x20;
-+ ehci_port_power(ehci, 0);
-+
-+ return 0;
-+
-+err:
-+ ehci_avr32_stop_clocks(dev);
-+ return ret;
-+}
-+
-+static void ehci_avr32_shutdown(struct usb_hcd *hcd)
-+{
-+ ehci_shutdown(hcd);
-+ ehci_avr32_stop_clocks(hcd->self.controller);
-+}
-+
-+static const struct hc_driver ehci_avr32_hc_driver = {
-+ .description = hcd_name,
-+ .product_desc = "AVR32 USBH (EHCI)",
-+ .hcd_priv_size = sizeof(struct ehci_hcd),
-+
-+ .irq = ehci_irq,
-+ .flags = HCD_MEMORY | HCD_USB2,
-+
-+ .reset = ehci_avr32_setup,
-+ .start = ehci_run,
-+ .stop = ehci_stop,
-+ .shutdown = ehci_avr32_shutdown,
-+
-+ .urb_enqueue = ehci_urb_enqueue,
-+ .urb_dequeue = ehci_urb_dequeue,
-+ .endpoint_disable = ehci_endpoint_disable,
-+
-+ .get_frame_number = ehci_get_frame,
-+
-+ .hub_status_data = ehci_hub_status_data,
-+ .hub_control = ehci_hub_control,
-+ .bus_suspend = ehci_bus_suspend,
-+ .bus_resume = ehci_bus_resume,
-+ .relinquish_port = ehci_relinquish_port,
-+ .port_handed_over = ehci_port_handed_over,
-+};
-+
-+static int ehci_avr32_probe(struct platform_device *pdev)
-+{
-+ struct resource *reg_res;
-+ struct usb_hcd *hcd;
-+ struct ehci_hcd *ehci;
-+ int irq;
-+ int ret;
-+
-+ reg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!reg_res) {
-+ dev_dbg(&pdev->dev, "no MMIO resource\n");
-+ return -ENXIO;
-+ }
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_dbg(&pdev->dev, "no IRQ resource\n");
-+ return -ENXIO;
-+ }
-+
-+ hclk = clk_get(&pdev->dev, "hclk");
-+ if (IS_ERR(hclk)) {
-+ dev_dbg(&pdev->dev, "no HSB clock\n");
-+ return -ENXIO;
-+ }
-+ utmi_clk = clk_get(&pdev->dev, "utmi_clk");
-+ if (IS_ERR(utmi_clk)) {
-+ dev_dbg(&pdev->dev, "no UTMI clock\n");
-+ ret = -ENXIO;
-+ goto err_utmi_clk;
-+ }
-+
-+ if (!request_mem_region(reg_res->start,
-+ reg_res->end - reg_res->start + 1,
-+ hcd_name)) {
-+ dev_dbg(&pdev->dev, "config regs busy\n");
-+ ret = -EBUSY;
-+ goto err_request_mmio;
-+ }
-+
-+ ret = -ENOMEM;
-+
-+ hcd = usb_create_hcd(&ehci_avr32_hc_driver, &pdev->dev, "ehci-avr32");
-+ if (!hcd) {
-+ dev_dbg(&pdev->dev, "failed to create hcd\n");
-+ goto err_create_hcd;
-+ }
-+
-+ hcd->rsrc_start = reg_res->start;
-+ hcd->rsrc_len = reg_res->end - reg_res->start + 1;
-+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-+ if (!hcd->regs) {
-+ dev_dbg(&pdev->dev, "failed to map registers\n");
-+ goto err_ioremap;
-+ }
-+
-+ ehci = hcd_to_ehci(hcd);
-+ ehci->big_endian_mmio = 1;
-+ ehci->big_endian_desc = 1;
-+
-+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
-+ if (ret)
-+ goto err_add_hcd;
-+
-+ return 0;
-+
-+err_add_hcd:
-+ iounmap(hcd->regs);
-+err_ioremap:
-+ usb_put_hcd(hcd);
-+err_create_hcd:
-+ release_mem_region(reg_res->start, reg_res->end - reg_res->start + 1);
-+err_request_mmio:
-+ clk_put(utmi_clk);
-+err_utmi_clk:
-+ clk_put(hclk);
-+
-+ return ret;
-+}
-+
-+static int ehci_avr32_remove(struct platform_device *pdev)
-+{
-+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
-+
-+ platform_set_drvdata(pdev, NULL);
-+ usb_remove_hcd(hcd);
-+ iounmap(hcd->regs);
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+ usb_put_hcd(hcd);
-+ clk_put(utmi_clk);
-+ clk_put(hclk);
-+
-+ return 0;
-+}
-+
-+/* FIXME */
-+#define ehci_avr32_suspend NULL
-+#define ehci_avr32_resume NULL
-+
-+static struct platform_driver ehci_hcd_avr32_driver = {
-+ .probe = ehci_avr32_probe,
-+ .remove = ehci_avr32_remove,
-+ .suspend = ehci_avr32_suspend,
-+ .resume = ehci_avr32_resume,
-+ .shutdown = usb_hcd_platform_shutdown,
-+ .driver = {
-+ .name = "ehci",
-+ },
-+};
-diff -urN linux-2.6.28.2-0rig//drivers/usb/host/ehci-hcd.c linux-2.6.28.2/drivers/usb/host/ehci-hcd.c
---- linux-2.6.28.2-0rig//drivers/usb/host/ehci-hcd.c 2009-01-29 08:39:25.000000000 +0100
-+++ linux-2.6.28.2/drivers/usb/host/ehci-hcd.c 2009-01-29 08:52:50.000000000 +0100
-@@ -1014,6 +1014,11 @@
- #define PLATFORM_DRIVER ehci_hcd_au1xxx_driver
- #endif
-
-+#ifdef CONFIG_AVR32
-+#include "ehci-avr32.c"
-+#define PLATFORM_DRIVER ehci_hcd_avr32_driver
-+#endif
-+
- #ifdef CONFIG_PPC_PS3
- #include "ehci-ps3.c"
- #define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver
-diff -urN linux-2.6.28.2-0rig//drivers/usb/host/Kconfig linux-2.6.28.2/drivers/usb/host/Kconfig
---- linux-2.6.28.2-0rig//drivers/usb/host/Kconfig 2009-01-29 08:39:25.000000000 +0100
-+++ linux-2.6.28.2/drivers/usb/host/Kconfig 2009-01-29 08:52:50.000000000 +0100
-@@ -73,12 +73,12 @@
-
- config USB_EHCI_BIG_ENDIAN_MMIO
- bool
-- depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX)
-+ depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX || AVR32)
- default y
-
- config USB_EHCI_BIG_ENDIAN_DESC
- bool
-- depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
-+ depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || AVR32)
- default y
-
- config USB_EHCI_FSL
-@@ -196,17 +196,19 @@
- config USB_OHCI_BIG_ENDIAN_DESC
- bool
- depends on USB_OHCI_HCD
-+ default y if AVR32
- default n
-
- config USB_OHCI_BIG_ENDIAN_MMIO
- bool
- depends on USB_OHCI_HCD
-+ default y if AVR32
- default n
-
- config USB_OHCI_LITTLE_ENDIAN
- bool
- depends on USB_OHCI_HCD
-- default n if STB03xxx || PPC_MPC52xx
-+ default n if STB03xxx || PPC_MPC52xx || AVR32
- default y
-
- config USB_UHCI_HCD
-diff -urN linux-2.6.28.2-0rig//drivers/usb/host/ohci-avr32.c linux-2.6.28.2/drivers/usb/host/ohci-avr32.c
---- linux-2.6.28.2-0rig//drivers/usb/host/ohci-avr32.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/drivers/usb/host/ohci-avr32.c 2009-01-29 08:52:50.000000000 +0100
-@@ -0,0 +1,208 @@
-+/*
-+ * AVR32 OHCI bus and power management glue
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/platform_device.h>
-+
-+/* Grr! The core layer doesn't let us keep private data anywhere! */
-+static struct clk *ohci_clk;
-+static struct clk *utmi_clk;
-+static struct clk *hclk;
-+
-+static void ohci_avr32_start_clocks(struct device *dev)
-+{
-+ dev_vdbg(dev, "starting clocks...\n");
-+
-+ clk_enable(ohci_clk);
-+ clk_enable(utmi_clk);
-+ clk_enable(hclk);
-+}
-+
-+static void ohci_avr32_stop_clocks(struct device *dev)
-+{
-+ dev_vdbg(dev, "stopping clocks...\n");
-+
-+ clk_disable(hclk);
-+ clk_disable(utmi_clk);
-+ clk_disable(ohci_clk);
-+}
-+
-+static int ohci_avr32_start(struct usb_hcd *hcd)
-+{
-+ struct device *dev = hcd->self.controller;
-+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-+ int ret;
-+
-+ ohci_avr32_start_clocks(dev);
-+
-+ ret = ohci_init(ohci);
-+ if (ret)
-+ goto err_ohci_init;
-+
-+ ret = ohci_run(ohci);
-+ if (likely(!ret))
-+ return 0;
-+
-+ ohci_stop(hcd);
-+
-+err_ohci_init:
-+ ohci_avr32_stop_clocks(dev);
-+ return ret;
-+}
-+
-+static void ohci_avr32_stop(struct usb_hcd *hcd)
-+{
-+ ohci_stop(hcd);
-+ ohci_avr32_stop_clocks(hcd->self.controller);
-+}
-+
-+static const struct hc_driver ohci_avr32_hc_driver = {
-+ .description = hcd_name,
-+ .product_desc = "AVR32 USBH (OHCI)",
-+ .hcd_priv_size = sizeof(struct ohci_hcd),
-+
-+ .irq = ohci_irq,
-+ .flags = HCD_USB11 | HCD_MEMORY,
-+
-+ .start = ohci_avr32_start,
-+ .stop = ohci_avr32_stop,
-+ .shutdown = ohci_shutdown,
-+
-+ .urb_enqueue = ohci_urb_enqueue,
-+ .urb_dequeue = ohci_urb_dequeue,
-+ .endpoint_disable = ohci_endpoint_disable,
-+ .get_frame_number = ohci_get_frame,
-+ .hub_status_data = ohci_hub_status_data,
-+ .hub_control = ohci_hub_control,
-+#ifdef CONFIG_PM
-+ .bus_suspend = ohci_bus_suspend,
-+ .bus_resume = ohci_bus_resume,
-+#endif
-+ .start_port_reset = ohci_start_port_reset,
-+};
-+
-+static int ohci_avr32_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs;
-+ struct usb_hcd *hcd;
-+ int irq;
-+ int ret;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_dbg(&pdev->dev, "no MMIO resource\n");
-+ return -ENXIO;
-+ }
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_dbg(&pdev->dev, "no IRQ resource\n");
-+ return -ENXIO;
-+ }
-+
-+ hclk = clk_get(&pdev->dev, "hclk");
-+ if (IS_ERR(hclk)) {
-+ dev_dbg(&pdev->dev, "no HSB clock\n");
-+ return -ENXIO;
-+ }
-+ utmi_clk = clk_get(&pdev->dev, "utmi_clk");
-+ if (IS_ERR(utmi_clk)) {
-+ dev_dbg(&pdev->dev, "no UTMI clock\n");
-+ ret = -ENXIO;
-+ goto err_utmi_clk;
-+ }
-+ ohci_clk = clk_get(&pdev->dev, "ohci_clk");
-+ if (IS_ERR(ohci_clk)) {
-+ dev_dbg(&pdev->dev, "no OHCI clock\n");
-+ ret = -ENXIO;
-+ goto err_ohci_clk;
-+ }
-+
-+ if (!request_mem_region(regs->start, regs->end - regs->start + 1,
-+ hcd_name)) {
-+ dev_dbg(&pdev->dev, "config regs busy\n");
-+ ret = -EBUSY;
-+ goto err_request_mmio;
-+ }
-+
-+ ret = -ENOMEM;
-+ hcd = usb_create_hcd(&ohci_avr32_hc_driver, &pdev->dev, "ohci-avr32");
-+ if (!hcd) {
-+ dev_dbg(&pdev->dev, "failed to create hcd\n");
-+ goto err_create_hcd;
-+ }
-+
-+ hcd->rsrc_start = regs->start;
-+ hcd->rsrc_len = regs->end - regs->start + 1;
-+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-+ if (!hcd->regs) {
-+ dev_dbg(&pdev->dev, "failed to map registers\n");
-+ goto err_ioremap;
-+ }
-+
-+ ohci_hcd_init(hcd_to_ohci(hcd));
-+
-+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
-+ if (ret)
-+ goto err_add_hcd;
-+
-+ return 0;
-+
-+err_add_hcd:
-+ iounmap(hcd->regs);
-+err_ioremap:
-+ usb_put_hcd(hcd);
-+err_create_hcd:
-+ release_mem_region(regs->start, regs->end - regs->start + 1);
-+err_request_mmio:
-+ clk_put(ohci_clk);
-+err_ohci_clk:
-+ clk_put(utmi_clk);
-+err_utmi_clk:
-+ clk_put(hclk);
-+
-+ return ret;
-+}
-+
-+static int ohci_avr32_remove(struct platform_device *pdev)
-+{
-+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
-+
-+ platform_set_drvdata(pdev, NULL);
-+ usb_remove_hcd(hcd);
-+ iounmap(hcd->regs);
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+ usb_put_hcd(hcd);
-+ clk_put(utmi_clk);
-+ clk_put(ohci_clk);
-+ clk_put(hclk);
-+
-+ return 0;
-+}
-+
-+/* FIXME */
-+#define ohci_avr32_suspend NULL
-+#define ohci_avr32_resume NULL
-+
-+static struct platform_driver ohci_hcd_avr32_driver = {
-+ .probe = ohci_avr32_probe,
-+ .remove = ohci_avr32_remove,
-+ .shutdown = usb_hcd_platform_shutdown,
-+ .suspend = ohci_avr32_suspend,
-+ .resume = ohci_avr32_resume,
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "ohci",
-+ },
-+};
-+MODULE_ALIAS("platform:ohci");
-diff -urN linux-2.6.28.2-0rig//drivers/usb/host/ohci.h linux-2.6.28.2/drivers/usb/host/ohci.h
---- linux-2.6.28.2-0rig//drivers/usb/host/ohci.h 2009-01-29 08:39:25.000000000 +0100
-+++ linux-2.6.28.2/drivers/usb/host/ohci.h 2009-01-29 08:52:50.000000000 +0100
-@@ -646,8 +646,10 @@
- * some big-endian SOC implementations. Same thing happens with PSW access.
- */
-
--#ifdef CONFIG_PPC_MPC52xx
-+#if defined(CONFIG_PPC_MPC52xx)
- #define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO)
-+#elif defined(CONFIG_AVR32)
-+#define big_endian_frame_no_quirk(ohci) 1
- #else
- #define big_endian_frame_no_quirk(ohci) 0
- #endif
-diff -urN linux-2.6.28.2-0rig//drivers/usb/host/ohci-hcd.c linux-2.6.28.2/drivers/usb/host/ohci-hcd.c
---- linux-2.6.28.2-0rig//drivers/usb/host/ohci-hcd.c 2009-01-29 08:39:25.000000000 +0100
-+++ linux-2.6.28.2/drivers/usb/host/ohci-hcd.c 2009-01-29 08:52:50.000000000 +0100
-@@ -1042,6 +1042,11 @@
- #define PLATFORM_DRIVER ohci_hcd_at91_driver
- #endif
-
-+#ifdef CONFIG_AVR32
-+#include "ohci-avr32.c"
-+#define PLATFORM_DRIVER ohci_hcd_avr32_driver
-+#endif
-+
- #ifdef CONFIG_ARCH_PNX4008
- #include "ohci-pnx4008.c"
- #define PLATFORM_DRIVER usb_hcd_pnx4008_driver
-diff -urN linux-2.6.28.2-0rig//drivers/usb/Kconfig linux-2.6.28.2/drivers/usb/Kconfig
---- linux-2.6.28.2-0rig//drivers/usb/Kconfig 2009-01-29 08:39:25.000000000 +0100
-+++ linux-2.6.28.2/drivers/usb/Kconfig 2009-01-29 08:52:50.000000000 +0100
-@@ -56,6 +56,7 @@
- default y if PPC_83xx
- default y if SOC_AU1200
- default y if ARCH_IXP4XX
-+ default y if AVR32
- default PCI
-
- # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
-diff -urN linux-2.6.28.2-0rig//drivers/watchdog/at32ap700x_wdt.c linux-2.6.28.2/drivers/watchdog/at32ap700x_wdt.c
---- linux-2.6.28.2-0rig//drivers/watchdog/at32ap700x_wdt.c 2009-01-29 08:39:31.000000000 +0100
-+++ linux-2.6.28.2/drivers/watchdog/at32ap700x_wdt.c 1970-01-01 01:00:00.000000000 +0100
-@@ -1,449 +0,0 @@
--/*
-- * Watchdog driver for Atmel AT32AP700X devices
-- *
-- * Copyright (C) 2005-2006 Atmel Corporation
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- *
-- *
-- * Errata: WDT Clear is blocked after WDT Reset
-- *
-- * A watchdog timer event will, after reset, block writes to the WDT_CLEAR
-- * register, preventing the program to clear the next Watchdog Timer Reset.
-- *
-- * If you still want to use the WDT after a WDT reset a small code can be
-- * insterted at the startup checking the AVR32_PM.rcause register for WDT reset
-- * and use a GPIO pin to reset the system. This method requires that one of the
-- * GPIO pins are available and connected externally to the RESET_N pin. After
-- * the GPIO pin has pulled down the reset line the GPIO will be reset and leave
-- * the pin tristated with pullup.
-- */
--
--#include <linux/init.h>
--#include <linux/kernel.h>
--#include <linux/module.h>
--#include <linux/moduleparam.h>
--#include <linux/miscdevice.h>
--#include <linux/fs.h>
--#include <linux/platform_device.h>
--#include <linux/watchdog.h>
--#include <linux/uaccess.h>
--#include <linux/io.h>
--#include <linux/spinlock.h>
--
--#define TIMEOUT_MIN 1
--#define TIMEOUT_MAX 2
--#define TIMEOUT_DEFAULT TIMEOUT_MAX
--
--/* module parameters */
--static int timeout = TIMEOUT_DEFAULT;
--module_param(timeout, int, 0);
--MODULE_PARM_DESC(timeout,
-- "Timeout value. Limited to be 1 or 2 seconds. (default="
-- __MODULE_STRING(TIMEOUT_DEFAULT) ")");
--
--static int nowayout = WATCHDOG_NOWAYOUT;
--module_param(nowayout, int, 0);
--MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
-- __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
--
--/* Watchdog registers and write/read macro */
--#define WDT_CTRL 0x00
--#define WDT_CTRL_EN 0
--#define WDT_CTRL_PSEL 8
--#define WDT_CTRL_KEY 24
--
--#define WDT_CLR 0x04
--
--#define WDT_RCAUSE 0x10
--#define WDT_RCAUSE_POR 0
--#define WDT_RCAUSE_EXT 2
--#define WDT_RCAUSE_WDT 3
--#define WDT_RCAUSE_JTAG 4
--#define WDT_RCAUSE_SERP 5
--
--#define WDT_BIT(name) (1 << WDT_##name)
--#define WDT_BF(name, value) ((value) << WDT_##name)
--
--#define wdt_readl(dev, reg) \
-- __raw_readl((dev)->regs + WDT_##reg)
--#define wdt_writel(dev, reg, value) \
-- __raw_writel((value), (dev)->regs + WDT_##reg)
--
--struct wdt_at32ap700x {
-- void __iomem *regs;
-- spinlock_t io_lock;
-- int timeout;
-- int boot_status;
-- unsigned long users;
-- struct miscdevice miscdev;
--};
--
--static struct wdt_at32ap700x *wdt;
--static char expect_release;
--
--/*
-- * Disable the watchdog.
-- */
--static inline void at32_wdt_stop(void)
--{
-- unsigned long psel;
--
-- spin_lock(&wdt->io_lock);
-- psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f);
-- wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55));
-- wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa));
-- spin_unlock(&wdt->io_lock);
--}
--
--/*
-- * Enable and reset the watchdog.
-- */
--static inline void at32_wdt_start(void)
--{
-- /* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
-- unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe;
--
-- spin_lock(&wdt->io_lock);
-- wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
-- | WDT_BF(CTRL_PSEL, psel)
-- | WDT_BF(CTRL_KEY, 0x55));
-- wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
-- | WDT_BF(CTRL_PSEL, psel)
-- | WDT_BF(CTRL_KEY, 0xaa));
-- spin_unlock(&wdt->io_lock);
--}
--
--/*
-- * Pat the watchdog timer.
-- */
--static inline void at32_wdt_pat(void)
--{
-- spin_lock(&wdt->io_lock);
-- wdt_writel(wdt, CLR, 0x42);
-- spin_unlock(&wdt->io_lock);
--}
--
--/*
-- * Watchdog device is opened, and watchdog starts running.
-- */
--static int at32_wdt_open(struct inode *inode, struct file *file)
--{
-- if (test_and_set_bit(1, &wdt->users))
-- return -EBUSY;
--
-- at32_wdt_start();
-- return nonseekable_open(inode, file);
--}
--
--/*
-- * Close the watchdog device.
-- */
--static int at32_wdt_close(struct inode *inode, struct file *file)
--{
-- if (expect_release == 42) {
-- at32_wdt_stop();
-- } else {
-- dev_dbg(wdt->miscdev.parent,
-- "unexpected close, not stopping watchdog!\n");
-- at32_wdt_pat();
-- }
-- clear_bit(1, &wdt->users);
-- expect_release = 0;
-- return 0;
--}
--
--/*
-- * Change the watchdog time interval.
-- */
--static int at32_wdt_settimeout(int time)
--{
-- /*
-- * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is
-- * 2 ^ 16 allowing up to 2 seconds timeout.
-- */
-- if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX))
-- return -EINVAL;
--
-- /*
-- * Set new watchdog time. It will be used when at32_wdt_start() is
-- * called.
-- */
-- wdt->timeout = time;
-- return 0;
--}
--
--/*
-- * Get the watchdog status.
-- */
--static int at32_wdt_get_status(void)
--{
-- int rcause;
-- int status = 0;
--
-- rcause = wdt_readl(wdt, RCAUSE);
--
-- switch (rcause) {
-- case WDT_BIT(RCAUSE_EXT):
-- status = WDIOF_EXTERN1;
-- break;
-- case WDT_BIT(RCAUSE_WDT):
-- status = WDIOF_CARDRESET;
-- break;
-- case WDT_BIT(RCAUSE_POR): /* fall through */
-- case WDT_BIT(RCAUSE_JTAG): /* fall through */
-- case WDT_BIT(RCAUSE_SERP): /* fall through */
-- default:
-- break;
-- }
--
-- return status;
--}
--
--static struct watchdog_info at32_wdt_info = {
-- .identity = "at32ap700x watchdog",
-- .options = WDIOF_SETTIMEOUT |
-- WDIOF_KEEPALIVEPING |
-- WDIOF_MAGICCLOSE,
--};
--
--/*
-- * Handle commands from user-space.
-- */
--static long at32_wdt_ioctl(struct file *file,
-- unsigned int cmd, unsigned long arg)
--{
-- int ret = -ENOTTY;
-- int time;
-- void __user *argp = (void __user *)arg;
-- int __user *p = argp;
--
-- switch (cmd) {
-- case WDIOC_GETSUPPORT:
-- ret = copy_to_user(argp, &at32_wdt_info,
-- sizeof(at32_wdt_info)) ? -EFAULT : 0;
-- break;
-- case WDIOC_GETSTATUS:
-- ret = put_user(0, p);
-- break;
-- case WDIOC_GETBOOTSTATUS:
-- ret = put_user(wdt->boot_status, p);
-- break;
-- case WDIOC_SETOPTIONS:
-- ret = get_user(time, p);
-- if (ret)
-- break;
-- if (time & WDIOS_DISABLECARD)
-- at32_wdt_stop();
-- if (time & WDIOS_ENABLECARD)
-- at32_wdt_start();
-- ret = 0;
-- break;
-- case WDIOC_KEEPALIVE:
-- at32_wdt_pat();
-- ret = 0;
-- break;
-- case WDIOC_SETTIMEOUT:
-- ret = get_user(time, p);
-- if (ret)
-- break;
-- ret = at32_wdt_settimeout(time);
-- if (ret)
-- break;
-- /* Enable new time value */
-- at32_wdt_start();
-- /* fall through */
-- case WDIOC_GETTIMEOUT:
-- ret = put_user(wdt->timeout, p);
-- break;
-- }
--
-- return ret;
--}
--
--static ssize_t at32_wdt_write(struct file *file, const char __user *data,
-- size_t len, loff_t *ppos)
--{
-- /* See if we got the magic character 'V' and reload the timer */
-- if (len) {
-- if (!nowayout) {
-- size_t i;
--
-- /*
-- * note: just in case someone wrote the magic
-- * character five months ago...
-- */
-- expect_release = 0;
--
-- /*
-- * scan to see whether or not we got the magic
-- * character
-- */
-- for (i = 0; i != len; i++) {
-- char c;
-- if (get_user(c, data + i))
-- return -EFAULT;
-- if (c == 'V')
-- expect_release = 42;
-- }
-- }
-- /* someone wrote to us, we should pat the watchdog */
-- at32_wdt_pat();
-- }
-- return len;
--}
--
--static const struct file_operations at32_wdt_fops = {
-- .owner = THIS_MODULE,
-- .llseek = no_llseek,
-- .unlocked_ioctl = at32_wdt_ioctl,
-- .open = at32_wdt_open,
-- .release = at32_wdt_close,
-- .write = at32_wdt_write,
--};
--
--static int __init at32_wdt_probe(struct platform_device *pdev)
--{
-- struct resource *regs;
-- int ret;
--
-- if (wdt) {
-- dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n");
-- return -EBUSY;
-- }
--
-- regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- if (!regs) {
-- dev_dbg(&pdev->dev, "missing mmio resource\n");
-- return -ENXIO;
-- }
--
-- wdt = kzalloc(sizeof(struct wdt_at32ap700x), GFP_KERNEL);
-- if (!wdt) {
-- dev_dbg(&pdev->dev, "no memory for wdt structure\n");
-- return -ENOMEM;
-- }
--
-- wdt->regs = ioremap(regs->start, regs->end - regs->start + 1);
-- if (!wdt->regs) {
-- ret = -ENOMEM;
-- dev_dbg(&pdev->dev, "could not map I/O memory\n");
-- goto err_free;
-- }
--
-- spin_lock_init(&wdt->io_lock);
-- wdt->boot_status = at32_wdt_get_status();
--
-- /* Work-around for watchdog silicon errata. */
-- if (wdt->boot_status & WDIOF_CARDRESET) {
-- dev_info(&pdev->dev, "CPU must be reset with external "
-- "reset or POR due to silicon errata.\n");
-- ret = -EIO;
-- goto err_iounmap;
-- } else {
-- wdt->users = 0;
-- }
-- wdt->miscdev.minor = WATCHDOG_MINOR;
-- wdt->miscdev.name = "watchdog";
-- wdt->miscdev.fops = &at32_wdt_fops;
--
-- if (at32_wdt_settimeout(timeout)) {
-- at32_wdt_settimeout(TIMEOUT_DEFAULT);
-- dev_dbg(&pdev->dev,
-- "default timeout invalid, set to %d sec.\n",
-- TIMEOUT_DEFAULT);
-- }
--
-- ret = misc_register(&wdt->miscdev);
-- if (ret) {
-- dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
-- goto err_iounmap;
-- }
--
-- platform_set_drvdata(pdev, wdt);
-- wdt->miscdev.parent = &pdev->dev;
-- dev_info(&pdev->dev,
-- "AT32AP700X WDT at 0x%p, timeout %d sec (nowayout=%d)\n",
-- wdt->regs, wdt->timeout, nowayout);
--
-- return 0;
--
--err_iounmap:
-- iounmap(wdt->regs);
--err_free:
-- kfree(wdt);
-- wdt = NULL;
-- return ret;
--}
--
--static int __exit at32_wdt_remove(struct platform_device *pdev)
--{
-- if (wdt && platform_get_drvdata(pdev) == wdt) {
-- /* Stop the timer before we leave */
-- if (!nowayout)
-- at32_wdt_stop();
--
-- misc_deregister(&wdt->miscdev);
-- iounmap(wdt->regs);
-- kfree(wdt);
-- wdt = NULL;
-- platform_set_drvdata(pdev, NULL);
-- }
-- return 0;
--}
--
--static void at32_wdt_shutdown(struct platform_device *pdev)
--{
-- at32_wdt_stop();
--}
--
--#ifdef CONFIG_PM
--static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message)
--{
-- at32_wdt_stop();
-- return 0;
--}
--
--static int at32_wdt_resume(struct platform_device *pdev)
--{
-- if (wdt->users)
-- at32_wdt_start();
-- return 0;
--}
--#else
--#define at32_wdt_suspend NULL
--#define at32_wdt_resume NULL
--#endif
--
--/* work with hotplug and coldplug */
--MODULE_ALIAS("platform:at32_wdt");
--
--static struct platform_driver at32_wdt_driver = {
-- .remove = __exit_p(at32_wdt_remove),
-- .suspend = at32_wdt_suspend,
-- .resume = at32_wdt_resume,
-- .driver = {
-- .name = "at32_wdt",
-- .owner = THIS_MODULE,
-- },
-- .shutdown = at32_wdt_shutdown,
--};
--
--static int __init at32_wdt_init(void)
--{
-- return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe);
--}
--module_init(at32_wdt_init);
--
--static void __exit at32_wdt_exit(void)
--{
-- platform_driver_unregister(&at32_wdt_driver);
--}
--module_exit(at32_wdt_exit);
--
--MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
--MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X");
--MODULE_LICENSE("GPL");
--MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-diff -urN linux-2.6.28.2-0rig//drivers/watchdog/at32_wdt.c linux-2.6.28.2/drivers/watchdog/at32_wdt.c
---- linux-2.6.28.2-0rig//drivers/watchdog/at32_wdt.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/drivers/watchdog/at32_wdt.c 2009-01-29 08:52:50.000000000 +0100
-@@ -0,0 +1,620 @@
-+/*
-+ * Watchdog driver for Atmel AVR32 devices
-+ *
-+ * Copyright (C) 2005-2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ *
-+ * AT32AP700x Errata: WDT Clear is blocked after WDT Reset
-+ *
-+ * A watchdog timer event will, after reset, block writes to the WDT_CLEAR
-+ * register, preventing the program to clear the next Watchdog Timer Reset.
-+ *
-+ * If you still want to use the WDT after a WDT reset a small code can be
-+ * insterted at the startup checking the AVR32_PM.rcause register for WDT reset
-+ * and use a GPIO pin to reset the system. This method requires that one of the
-+ * GPIO pins are available and connected externally to the RESET_N pin. After
-+ * the GPIO pin has pulled down the reset line the GPIO will be reset and leave
-+ * the pin tristated with pullup.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/miscdevice.h>
-+#include <linux/fs.h>
-+#include <linux/platform_device.h>
-+#include <linux/watchdog.h>
-+#include <linux/uaccess.h>
-+#include <linux/io.h>
-+#include <linux/log2.h>
-+#include <linux/spinlock.h>
-+
-+#include <mach/cpu.h>
-+#include <mach/pm.h>
-+
-+/*
-+ * AT32AP700x uses a 16-bit prescaler. This limits the timeout range
-+ * somewhat. Later chips use a 32-bit prescaler.
-+ */
-+#define TIMEOUT_MIN 1
-+#ifdef CONFIG_CPU_AT32AP700X
-+# define TIMEOUT_MAX 2
-+# define TIMEOUT_DEFAULT TIMEOUT_MAX
-+#else
-+# define TIMEOUT_MAX 131072
-+# define TIMEOUT_DEFAULT 64
-+#endif
-+
-+/* module parameters */
-+static int timeout = TIMEOUT_DEFAULT;
-+module_param(timeout, int, 0);
-+MODULE_PARM_DESC(timeout,
-+ "Timeout value. Any power of two between 1 and "
-+ __MODULE_STRING(TIMEOUT_MAX) " seconds. (default="
-+ __MODULE_STRING(TIMEOUT_DEFAULT) ")");
-+
-+static int nowayout = WATCHDOG_NOWAYOUT;
-+module_param(nowayout, int, 0);
-+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
-+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-+
-+/* Watchdog registers and write/read macro */
-+#define WDT_CTRL 0x00
-+#define WDT_CTRL_EN 0
-+#define WDT_CTRL_PSEL 8
-+#define WDT_CTRL_CEN 16
-+#define WDT_CTRL_CSEL 17
-+#define WDT_CTRL_KEY 24
-+
-+#define WDT_CLR 0x04
-+
-+#define WDT_BIT(name) (1 << WDT_##name)
-+#define WDT_BF(name, value) ((value) << WDT_##name)
-+
-+#define wdt_readl(dev, reg) \
-+ __raw_readl((dev)->regs + WDT_##reg)
-+#define wdt_writel(dev, reg, value) \
-+ __raw_writel((value), (dev)->regs + WDT_##reg)
-+
-+struct wdt_at32 {
-+ void __iomem *regs;
-+ struct clk *pclk;
-+ struct clk *src_clk;
-+ spinlock_t io_lock;
-+ int timeout;
-+ int boot_status;
-+ unsigned long users;
-+ struct miscdevice miscdev;
-+};
-+
-+static struct wdt_at32 *wdt;
-+static char expect_release;
-+
-+static inline void wdt_clk_enable(struct wdt_at32 *w)
-+{
-+ if (!cpu_is_at32ap7000())
-+ clk_enable(w->pclk);
-+}
-+
-+static inline void wdt_clk_disable(struct wdt_at32 *w)
-+{
-+ if (!cpu_is_at32ap7000())
-+ clk_disable(w->pclk);
-+}
-+
-+static inline int at32_wdt_version(void)
-+{
-+ if (cpu_is_at32ap7000())
-+ return 1;
-+ if (cpu_is_at32ap7200())
-+ return 3;
-+
-+ BUG();
-+}
-+
-+static unsigned long at32_wdt_calc_psel(int timeout)
-+{
-+ if (at32_wdt_version() == 1)
-+ /* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
-+ return (timeout > 1) ? 0xf : 0xe;
-+
-+ return order_base_2(timeout) + 14;
-+}
-+
-+/*
-+ * Disable the watchdog.
-+ */
-+static inline void at32_wdt_stop(void)
-+{
-+ unsigned long ctrl;
-+ unsigned long ctrl_mask = 0;
-+
-+ switch (at32_wdt_version()) {
-+ case 3:
-+ ctrl_mask |= (1 << WDT_CTRL_CEN) | (1 << WDT_CTRL_CSEL);
-+ /* fall through */
-+ case 2:
-+ ctrl_mask |= 0x1f << WDT_CTRL_PSEL;
-+ break;
-+ case 1:
-+ ctrl_mask |= 0x0f << WDT_CTRL_PSEL;
-+ break;
-+ }
-+
-+ wdt_clk_enable(wdt);
-+ spin_lock(&wdt->io_lock);
-+ ctrl = wdt_readl(wdt, CTRL);
-+ ctrl &= ctrl_mask;
-+ wdt_writel(wdt, CTRL, ctrl | WDT_BF(CTRL_KEY, 0x55));
-+ wdt_writel(wdt, CTRL, ctrl | WDT_BF(CTRL_KEY, 0xaa));
-+ spin_unlock(&wdt->io_lock);
-+ wdt_clk_disable(wdt);
-+}
-+
-+/*
-+ * Enable and reset the watchdog.
-+ */
-+static inline void at32_wdt_start(void)
-+{
-+ unsigned long psel;
-+ unsigned long ctrl;
-+
-+ psel = at32_wdt_calc_psel(wdt->timeout);
-+ ctrl = WDT_BIT(CTRL_EN) | WDT_BF(CTRL_PSEL, psel);
-+
-+ if (at32_wdt_version() >= 3)
-+ ctrl |= wdt_readl(wdt, CTRL)
-+ & (WDT_BIT(CTRL_CSEL) | WDT_BIT(CTRL_CEN));
-+
-+ wdt_clk_enable(wdt);
-+ spin_lock(&wdt->io_lock);
-+ wdt_writel(wdt, CTRL, ctrl | WDT_BF(CTRL_KEY, 0x55));
-+ wdt_writel(wdt, CTRL, ctrl | WDT_BF(CTRL_KEY, 0xaa));
-+ spin_unlock(&wdt->io_lock);
-+ wdt_clk_disable(wdt);
-+}
-+
-+/*
-+ * Pat the watchdog timer.
-+ */
-+static inline void at32_wdt_pat(void)
-+{
-+ wdt_clk_enable(wdt);
-+ spin_lock(&wdt->io_lock);
-+ wdt_writel(wdt, CLR, 0x42);
-+ spin_unlock(&wdt->io_lock);
-+ wdt_clk_disable(wdt);
-+}
-+
-+/*
-+ * Watchdog device is opened, and watchdog starts running.
-+ */
-+static int at32_wdt_open(struct inode *inode, struct file *file)
-+{
-+ if (test_and_set_bit(1, &wdt->users))
-+ return -EBUSY;
-+
-+ at32_wdt_start();
-+ return nonseekable_open(inode, file);
-+}
-+
-+/*
-+ * Close the watchdog device.
-+ */
-+static int at32_wdt_close(struct inode *inode, struct file *file)
-+{
-+ if (expect_release == 42) {
-+ at32_wdt_stop();
-+ } else {
-+ dev_dbg(wdt->miscdev.parent,
-+ "unexpected close, not stopping watchdog!\n");
-+ at32_wdt_pat();
-+ }
-+ clear_bit(1, &wdt->users);
-+ expect_release = 0;
-+ return 0;
-+}
-+
-+/*
-+ * Change the watchdog time interval.
-+ */
-+static int at32_wdt_settimeout(int time)
-+{
-+ /*
-+ * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max
-+ * prescaler is 2 ^ 16 (or 2 ^ 32) allowing up to TIMEOUT_MAX
-+ * seconds timeout.
-+ */
-+ if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX)
-+ || !is_power_of_2(time))
-+ return -EINVAL;
-+
-+ /*
-+ * Set new watchdog time. It will be used when at32_wdt_start() is
-+ * called.
-+ */
-+ wdt->timeout = time;
-+ return 0;
-+}
-+
-+/*
-+ * Get the watchdog status.
-+ */
-+static int at32_wdt_get_status(void)
-+{
-+ int rcause;
-+ int status = 0;
-+
-+ rcause = at32_get_reset_cause();
-+
-+ switch (rcause) {
-+ case AT32_RCAUSE_BOD:
-+ status = WDIOF_POWERUNDER;
-+ break;
-+ case AT32_RCAUSE_EXT:
-+ status = WDIOF_EXTERN1;
-+ break;
-+ case AT32_RCAUSE_JTAG:
-+ case AT32_RCAUSE_JTAGHARD:
-+ case AT32_RCAUSE_OCDRST:
-+ status = WDIOF_EXTERN2;
-+ break;
-+ case AT32_RCAUSE_WDT:
-+ status = WDIOF_CARDRESET;
-+ break;
-+ case AT32_RCAUSE_POR:
-+ case AT32_RCAUSE_NTAE:
-+ case AT32_RCAUSE_SLEEP:
-+ case AT32_RCAUSE_CPUERR:
-+ default:
-+ break;
-+ }
-+
-+ return status;
-+}
-+
-+static struct watchdog_info at32_wdt_info = {
-+ .identity = "at32 watchdog",
-+ .options = WDIOF_SETTIMEOUT |
-+ WDIOF_KEEPALIVEPING |
-+ WDIOF_MAGICCLOSE,
-+};
-+
-+/*
-+ * Handle commands from user-space.
-+ */
-+static long at32_wdt_ioctl(struct file *file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ int ret = -ENOTTY;
-+ int time;
-+ void __user *argp = (void __user *)arg;
-+ int __user *p = argp;
-+
-+ switch (cmd) {
-+ case WDIOC_GETSUPPORT:
-+ ret = copy_to_user(argp, &at32_wdt_info,
-+ sizeof(at32_wdt_info)) ? -EFAULT : 0;
-+ break;
-+ case WDIOC_GETSTATUS:
-+ ret = put_user(0, p);
-+ break;
-+ case WDIOC_GETBOOTSTATUS:
-+ ret = put_user(wdt->boot_status, p);
-+ break;
-+ case WDIOC_SETOPTIONS:
-+ ret = get_user(time, p);
-+ if (ret)
-+ break;
-+ if (time & WDIOS_DISABLECARD)
-+ at32_wdt_stop();
-+ if (time & WDIOS_ENABLECARD)
-+ at32_wdt_start();
-+ ret = 0;
-+ break;
-+ case WDIOC_KEEPALIVE:
-+ at32_wdt_pat();
-+ ret = 0;
-+ break;
-+ case WDIOC_SETTIMEOUT:
-+ ret = get_user(time, p);
-+ if (ret)
-+ break;
-+ ret = at32_wdt_settimeout(time);
-+ if (ret)
-+ break;
-+ /* Enable new time value */
-+ at32_wdt_start();
-+ /* fall through */
-+ case WDIOC_GETTIMEOUT:
-+ ret = put_user(wdt->timeout, p);
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+static ssize_t at32_wdt_write(struct file *file, const char __user *data,
-+ size_t len, loff_t *ppos)
-+{
-+ /* See if we got the magic character 'V' and reload the timer */
-+ if (len) {
-+ if (!nowayout) {
-+ size_t i;
-+
-+ /*
-+ * note: just in case someone wrote the magic
-+ * character five months ago...
-+ */
-+ expect_release = 0;
-+
-+ /*
-+ * scan to see whether or not we got the magic
-+ * character
-+ */
-+ for (i = 0; i != len; i++) {
-+ char c;
-+ if (get_user(c, data + i))
-+ return -EFAULT;
-+ if (c == 'V')
-+ expect_release = 42;
-+ }
-+ }
-+ /* someone wrote to us, we should pat the watchdog */
-+ at32_wdt_pat();
-+ }
-+ return len;
-+}
-+
-+static const struct file_operations at32_wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .unlocked_ioctl = at32_wdt_ioctl,
-+ .open = at32_wdt_open,
-+ .release = at32_wdt_close,
-+ .write = at32_wdt_write,
-+};
-+
-+static int __init at32_wdt_enable_source_clock(struct platform_device *pdev)
-+{
-+ struct clk *clk;
-+ unsigned int csel;
-+ u32 ctrl;
-+
-+ /* Only v3+ have selectable source clock */
-+ if (at32_wdt_version() < 3)
-+ return 0;
-+
-+ csel = 1;
-+
-+ /*
-+ * Prefer the much more accurate crystal oscillator in favor
-+ * of the RC oscillator.
-+ */
-+ clk = clk_get(NULL, "osc32");
-+ if (IS_ERR(clk)) {
-+ csel = 0;
-+ clk = clk_get(NULL, "rcosc");
-+ }
-+ if (IS_ERR(clk)) {
-+ dev_dbg(&pdev->dev, "No source clock\n");
-+ return -ENXIO;
-+ }
-+
-+ clk_enable(clk);
-+
-+ dev_info(&pdev->dev, "Using 32 kHz %s oscillator\n",
-+ csel ? "crystal" : "RC");
-+
-+ wdt_clk_enable(wdt);
-+ ctrl = (csel << WDT_CTRL_CSEL) | (1 << WDT_CTRL_CEN);
-+
-+ /*
-+ * Make sure the WDT is disabled, and disable any clocks that
-+ * may have been selected earlier.
-+ */
-+ wdt_writel(wdt, CTRL, 0x55 << WDT_CTRL_KEY);
-+ wdt_writel(wdt, CTRL, 0xaa << WDT_CTRL_KEY);
-+
-+ /* Wait for the clock to become properly deselected */
-+ while (wdt_readl(wdt, CTRL) & (1 << WDT_CTRL_CEN))
-+ cpu_relax();
-+
-+ /* Select the new clock */
-+ wdt_writel(wdt, CTRL, ctrl | (0x55 << WDT_CTRL_KEY));
-+ wdt_writel(wdt, CTRL, ctrl | (0xaa << WDT_CTRL_KEY));
-+
-+ /* Wait for the new clock to become usable */
-+ while (!(wdt_readl(wdt, CTRL) & (1 << WDT_CTRL_CEN)))
-+ cpu_relax();
-+
-+ wdt_clk_disable(wdt);
-+ return 0;
-+}
-+
-+static void at32_wdt_disable_source_clock(void)
-+{
-+ wdt_clk_enable(wdt);
-+
-+ wdt_writel(wdt, CTRL, 0x55 << WDT_CTRL_KEY);
-+ wdt_writel(wdt, CTRL, 0xaa << WDT_CTRL_KEY);
-+
-+ /* Wait for the clock to become properly deselected */
-+ while (wdt_readl(wdt, CTRL) & (1 << WDT_CTRL_CEN))
-+ cpu_relax();
-+
-+ wdt_clk_disable(wdt);
-+}
-+
-+static int __init at32_wdt_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs;
-+ int ret;
-+
-+ if (wdt) {
-+ dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n");
-+ return -EBUSY;
-+ }
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_dbg(&pdev->dev, "missing mmio resource\n");
-+ return -ENXIO;
-+ }
-+
-+ wdt = kzalloc(sizeof(struct wdt_at32), GFP_KERNEL);
-+ if (!wdt) {
-+ dev_dbg(&pdev->dev, "no memory for wdt structure\n");
-+ return -ENOMEM;
-+ }
-+
-+ wdt->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!wdt->regs) {
-+ ret = -ENOMEM;
-+ dev_dbg(&pdev->dev, "could not map I/O memory\n");
-+ goto err_free;
-+ }
-+
-+ if (!cpu_is_at32ap7000()) {
-+ wdt->pclk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(wdt->pclk)) {
-+ dev_dbg(&pdev->dev, "no peripheral clock\n");
-+ ret = -ENXIO;
-+ goto err_iounmap;
-+ }
-+ }
-+
-+ ret = at32_wdt_enable_source_clock(pdev);
-+ if (ret)
-+ goto err_put_clk;
-+
-+ spin_lock_init(&wdt->io_lock);
-+ wdt->boot_status = at32_wdt_get_status();
-+
-+ /* Work-around for watchdog silicon errata. */
-+ if (cpu_is_at32ap7000()
-+ && (wdt->boot_status & WDIOF_CARDRESET)) {
-+ dev_info(&pdev->dev, "CPU must be reset with external "
-+ "reset or POR due to silicon errata.\n");
-+ ret = -EIO;
-+ goto err_disable_source_clock;
-+ } else {
-+ wdt->users = 0;
-+ }
-+ wdt->miscdev.minor = WATCHDOG_MINOR;
-+ wdt->miscdev.name = "watchdog";
-+ wdt->miscdev.fops = &at32_wdt_fops;
-+
-+ if (at32_wdt_settimeout(timeout)) {
-+ at32_wdt_settimeout(TIMEOUT_DEFAULT);
-+ dev_dbg(&pdev->dev,
-+ "default timeout invalid, set to %d sec.\n",
-+ TIMEOUT_DEFAULT);
-+ }
-+
-+ ret = misc_register(&wdt->miscdev);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
-+ goto err_iounmap;
-+ }
-+
-+ platform_set_drvdata(pdev, wdt);
-+ wdt->miscdev.parent = &pdev->dev;
-+ dev_info(&pdev->dev,
-+ "AT32 WDT at 0x%p, timeout %d sec (nowayout=%d)\n",
-+ wdt->regs, wdt->timeout, nowayout);
-+
-+ return 0;
-+
-+err_disable_source_clock:
-+ at32_wdt_disable_source_clock();
-+err_put_clk:
-+ if (!cpu_is_at32ap7000())
-+ clk_put(wdt->pclk);
-+err_iounmap:
-+ iounmap(wdt->regs);
-+err_free:
-+ kfree(wdt);
-+ wdt = NULL;
-+ return ret;
-+}
-+
-+static int __exit at32_wdt_remove(struct platform_device *pdev)
-+{
-+ if (wdt && platform_get_drvdata(pdev) == wdt) {
-+ /* Stop the timer before we leave */
-+ if (!nowayout) {
-+ at32_wdt_stop();
-+ at32_wdt_disable_source_clock();
-+ }
-+
-+ misc_deregister(&wdt->miscdev);
-+ if (!cpu_is_at32ap7000())
-+ clk_put(wdt->pclk);
-+ iounmap(wdt->regs);
-+ kfree(wdt);
-+ wdt = NULL;
-+ platform_set_drvdata(pdev, NULL);
-+ }
-+ return 0;
-+}
-+
-+static void at32_wdt_shutdown(struct platform_device *pdev)
-+{
-+ at32_wdt_stop();
-+}
-+
-+#ifdef CONFIG_PM
-+static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message)
-+{
-+ at32_wdt_stop();
-+ return 0;
-+}
-+
-+static int at32_wdt_resume(struct platform_device *pdev)
-+{
-+ if (wdt->users)
-+ at32_wdt_start();
-+ return 0;
-+}
-+#else
-+#define at32_wdt_suspend NULL
-+#define at32_wdt_resume NULL
-+#endif
-+
-+/* work with hotplug and coldplug */
-+MODULE_ALIAS("platform:at32_wdt");
-+
-+static struct platform_driver at32_wdt_driver = {
-+ .remove = __exit_p(at32_wdt_remove),
-+ .suspend = at32_wdt_suspend,
-+ .resume = at32_wdt_resume,
-+ .driver = {
-+ .name = "at32_wdt",
-+ .owner = THIS_MODULE,
-+ },
-+ .shutdown = at32_wdt_shutdown,
-+};
-+
-+static int __init at32_wdt_init(void)
-+{
-+ return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe);
-+}
-+module_init(at32_wdt_init);
-+
-+static void __exit at32_wdt_exit(void)
-+{
-+ platform_driver_unregister(&at32_wdt_driver);
-+}
-+module_exit(at32_wdt_exit);
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Watchdog driver for Atmel AVR32 devices");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-diff -urN linux-2.6.28.2-0rig//drivers/watchdog/Kconfig linux-2.6.28.2/drivers/watchdog/Kconfig
---- linux-2.6.28.2-0rig//drivers/watchdog/Kconfig 2009-01-29 08:39:31.000000000 +0100
-+++ linux-2.6.28.2/drivers/watchdog/Kconfig 2009-01-29 08:52:50.000000000 +0100
-@@ -237,12 +237,12 @@
-
- # AVR32 Architecture
-
--config AT32AP700X_WDT
-- tristate "AT32AP700x watchdog"
-- depends on CPU_AT32AP700X
-+config AT32_WDT
-+ tristate "AVR32 On-Chip Watchdog Timer"
-+ depends on AVR32
- help
-- Watchdog timer embedded into AT32AP700x devices. This will reboot
-- your system when the timeout is reached.
-+ Watchdog timer embedded into AT32AP700x and similar devices.
-+ This will reboot your system when the timeout is reached.
-
- # BLACKFIN Architecture
-
-diff -urN linux-2.6.28.2-0rig//drivers/watchdog/Makefile linux-2.6.28.2/drivers/watchdog/Makefile
---- linux-2.6.28.2-0rig//drivers/watchdog/Makefile 2009-01-29 08:39:31.000000000 +0100
-+++ linux-2.6.28.2/drivers/watchdog/Makefile 2009-01-29 08:52:50.000000000 +0100
-@@ -45,7 +45,7 @@
- # ARM26 Architecture
-
- # AVR32 Architecture
--obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
-+obj-$(CONFIG_AT32_WDT) += at32_wdt.o
-
- # BLACKFIN Architecture
- obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o
-diff -urN linux-2.6.28.2-0rig//drivers/video/atmel_lcdfb.c linux-2.6.28.2/drivers/video/atmel_lcdfb.c
---- linux-2.6.28.2-0rig//drivers/video/atmel_lcdfb.c 2009-01-29 08:39:31.000000000 +0100
-+++ linux-2.6.28.2/drivers/video/atmel_lcdfb.c 2009-01-29 08:52:50.000000000 +0100
-@@ -178,7 +178,7 @@
- static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
- .type = FB_TYPE_PACKED_PIXELS,
- .visual = FB_VISUAL_TRUECOLOR,
-- .xpanstep = 0,
-+ .xpanstep = 1,
- .ypanstep = 1,
- .ywrapstep = 0,
- .accel = FB_ACCEL_NONE,
-@@ -239,7 +239,7 @@
- }
-
- static void atmel_lcdfb_update_dma(struct fb_info *info,
-- struct fb_var_screeninfo *var)
-+ struct fb_var_screeninfo *var)
- {
- struct atmel_lcdfb_info *sinfo = info->par;
- struct fb_fix_screeninfo *fix = &info->fix;
-@@ -251,6 +251,8 @@
- dma_addr &= ~3UL;
-
- /* Set framebuffer DMA base address and pixel offset */
-+ dev_dbg(info->device, "%s:\n", __func__);
-+ dev_dbg(info->device, " *setting dma addr: 0x%lx \n", dma_addr);
- lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
-
- atmel_lcdfb_update_dma2d(sinfo, var);
-@@ -493,6 +495,7 @@
- dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n",
- info->var.xres, info->var.yres,
- info->var.xres_virtual, info->var.yres_virtual);
-+ dev_dbg(info->device, " * bpp: %u\n", info->var.bits_per_pixel);
-
- atmel_lcdfb_stop_nowait(sinfo);
-
-@@ -594,7 +597,12 @@
- lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
- /* Enable FIFO & DMA errors */
- lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
--
-+
-+ /* !!!HACK for logging end of frame and underruns
-+ when connected to MPOP. */
-+ if( info->var.bits_per_pixel == 32 )
-+ lcdc_writel(sinfo, ATMEL_LCDC_IER, 0x70);
-+
- /* ...wait for DMA engine to become idle... */
- while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
- msleep(10);
-@@ -695,7 +703,7 @@
- }
-
- static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
-- struct fb_info *info)
-+ struct fb_info *info)
- {
- dev_dbg(info->device, "%s\n", __func__);
-
-@@ -827,7 +835,8 @@
- info->fix = atmel_lcdfb_fix;
-
- /* Enable LCDC Clocks */
-- if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
-+ if (cpu_is_at91sam9261() || cpu_is_at32ap7000()
-+ || cpu_is_at32ap7200()) {
- sinfo->bus_clk = clk_get(dev, "hck1");
- if (IS_ERR(sinfo->bus_clk)) {
- ret = PTR_ERR(sinfo->bus_clk);
-diff -urN linux-2.6.28.2-0rig//drivers/video/atmel_mpopfb.c linux-2.6.28.2/drivers/video/atmel_mpopfb.c
---- linux-2.6.28.2-0rig//drivers/video/atmel_mpopfb.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/drivers/video/atmel_mpopfb.c 2009-01-29 08:52:50.000000000 +0100
-@@ -0,0 +1,1127 @@
-+/*
-+ * Driver for AT91/AT32 LCD Controller
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive for
-+ * more details.
-+ */
-+
-+#define DEBUG
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/uaccess.h>
-+
-+#include <mach/board.h>
-+#include <mach/cpu.h>
-+
-+#include <video/atmel_lcdc.h>
-+#include <video/atmel_mpop.h>
-+
-+#define mpop_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg))
-+#define mpop_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg))
-+
-+#define ATMEL_MPOPFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
-+ | FBINFO_PARTIAL_PAN_OK \
-+ | FBINFO_HWACCEL_XPAN \
-+ | FBINFO_HWACCEL_YPAN)
-+
-+static struct atmel_mpopfb_rgbconv_coeffs atmel_mpop_ycrcb2rgb_coeffs = {
-+ .r1 = 298,
-+ .r2 = 0,
-+ .r3 = 409,
-+ .r4 = -56992,
-+ .g1 = 298,
-+ .g2 = -100,
-+ .g3 = -208,
-+ .g4 = 34784,
-+ .b1 = 298,
-+ .b2 = 516,
-+ .b3 = 0,
-+ .b4 = -70688,
-+};
-+
-+static struct fb_fix_screeninfo atmel_mpopfb_fix __initdata = {
-+ .type = FB_TYPE_PLANES,
-+ .visual = FB_VISUAL_TRUECOLOR,
-+ .xpanstep = 16,
-+ .ypanstep = 1,
-+ .ywrapstep = 1,
-+ .accel = FB_ACCEL_NONE,
-+};
-+
-+static void atmel_mpopfb_update_sar(struct fb_info *info,
-+ struct fb_var_screeninfo *var)
-+{
-+ struct atmel_mpopfb_info *sinfo = info->par;
-+ struct fb_fix_screeninfo *fix = &info->fix;
-+ u32 y_sar, u_sar, v_sar, o1_sar, o2_sar, cursor_sar, next_sar;
-+
-+ u32 chroma_xres_virtual;
-+ u32 chroma_yres_virtual;
-+ u32 chroma_xres;
-+ u32 chroma_yres;
-+ u32 chroma_xoffset;
-+ u32 chroma_yoffset;
-+
-+ switch (var->bits_per_pixel) {
-+ default:
-+ case 12:
-+ chroma_xres_virtual = var->xres_virtual / 2;
-+ chroma_yres_virtual = var->yres_virtual / 2;
-+ chroma_xres = var->xres / 2;
-+ chroma_yres = var->yres / 2;
-+ chroma_xoffset = var->xoffset / 2;
-+ chroma_yoffset = var->yoffset / 2;
-+ break;
-+ case 16:
-+ chroma_xres_virtual = var->xres_virtual / 2;
-+ chroma_yres_virtual = var->yres_virtual;
-+ chroma_xres = var->xres / 2;
-+ chroma_yres = var->yres;
-+ chroma_xoffset = var->xoffset / 2;
-+ chroma_yoffset = var->yoffset;
-+ break;
-+ case 24:
-+ chroma_xres_virtual = var->xres_virtual;
-+ chroma_yres_virtual = var->yres_virtual;
-+ chroma_xres = var->xres;
-+ chroma_yres = var->yres;
-+ chroma_xoffset = var->xoffset;
-+ chroma_yoffset = var->yoffset;
-+ break;
-+ }
-+
-+ /* Setup pointer to YUV planes in YUV framebuffer. */
-+ y_sar = fix->smem_start + var->xoffset
-+ + var->yoffset * var->xres_virtual;
-+ u_sar = fix->smem_start + var->xres_virtual * var->yres_virtual
-+ + chroma_xoffset + chroma_yoffset * chroma_xres_virtual;
-+ v_sar = u_sar + chroma_xres_virtual * chroma_yres_virtual;
-+ next_sar = fix->smem_start + var->xres_virtual * var->yres_virtual
-+ + 2 * chroma_xres_virtual * chroma_yres_virtual;
-+ o1_sar = next_sar;
-+ if (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].enabled)
-+ next_sar += sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].xsize
-+ * sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].ysize;
-+ o2_sar = next_sar;
-+ if (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].enabled)
-+ next_sar += sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].xsize
-+ * sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].ysize;
-+ cursor_sar = next_sar;
-+
-+ if (sinfo->baseimg_info.flip) {
-+ /* If we flip we must start with the last line in the frame. */
-+ y_sar += var->xres_virtual * (var->yres - 1);
-+ u_sar += chroma_xres_virtual * (chroma_yres - 1);
-+ v_sar += chroma_xres_virtual * (chroma_yres - 1);
-+ }
-+
-+ dev_dbg(info->device, "%s:\n", __func__);
-+ dev_dbg(info->device, " * y_sar = 0x%x\n", y_sar);
-+ dev_dbg(info->device, " * u_sar = 0x%x\n", u_sar);
-+ dev_dbg(info->device, " * v_sar = 0x%x\n", v_sar);
-+ dev_dbg(info->device, " * o1_sar = 0x%x\n", o1_sar);
-+ dev_dbg(info->device, " * o2_sar = 0x%x\n", o2_sar);
-+ dev_dbg(info->device, " * cursor_sar = 0x%x\n", cursor_sar);
-+
-+ mpop_writel(sinfo, ATMEL_MPOP_Y_SAR, y_sar);
-+ mpop_writel(sinfo, ATMEL_MPOP_U_SAR, u_sar);
-+ mpop_writel(sinfo, ATMEL_MPOP_V_SAR, v_sar);
-+ mpop_writel(sinfo, ATMEL_MPOP_O1_SAR, o1_sar);
-+ mpop_writel(sinfo, ATMEL_MPOP_O2_SAR, o2_sar);
-+ mpop_writel(sinfo, ATMEL_MPOP_CURSOR_SAR, cursor_sar);
-+}
-+
-+static void atmel_mpopfb_free_video_memory(struct atmel_mpopfb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+
-+ dma_free_writecombine(info->device, info->fix.smem_len,
-+ (void __force *)info->screen_base,
-+ info->fix.smem_start);
-+}
-+
-+/**
-+ * atmel_mpopfb_alloc_video_memory - Allocate framebuffer memory
-+ * @sinfo: the frame buffer to allocate memory for
-+ */
-+static int atmel_mpopfb_alloc_video_memory(struct atmel_mpopfb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+ struct fb_var_screeninfo *var = &info->var;
-+
-+ info->fix.smem_len = (var->xres_virtual * var->yres_virtual
-+ * ((var->bits_per_pixel + 7) / 8));
-+
-+ info->screen_base
-+ = (void __iomem __force *)dma_alloc_writecombine(info->device,
-+ info->fix.smem_len,
-+ (dma_addr_t *)&info->fix.smem_start,
-+ GFP_KERNEL);
-+
-+ if (!info->screen_base)
-+ return -ENOMEM;
-+
-+ return 0;
-+}
-+
-+/**
-+ * atmel_mpopfb_check_var - Validates a var passed in.
-+ * @var: frame buffer variable screen structure
-+ * @info: frame buffer structure that represents a single frame buffer
-+ *
-+ * Checks to see if the hardware supports the state requested by
-+ * var passed in. This function does not alter the hardware
-+ * state!!! This means the data stored in struct fb_info and
-+ * struct atmel_mpopfb_info do not change. This includes the var
-+ * inside of struct fb_info. Do NOT change these. This function
-+ * can be called on its own if we intent to only test a mode and
-+ * not actually set it. The stuff in modedb.c is a example of
-+ * this. If the var passed in is slightly off by what the
-+ * hardware can support then we alter the var PASSED in to what
-+ * we can do. If the hardware doesn't support mode change a
-+ * -EINVAL will be returned by the upper layers. You don't need
-+ * to implement this function then. If you hardware doesn't
-+ * support changing the resolution then this function is not
-+ * needed. In this case the driver would just provide a var that
-+ * represents the static state the screen is in.
-+ *
-+ * Returns negative errno on error, or zero on success.
-+ */
-+static int atmel_mpopfb_check_var(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ struct device *dev = info->device;
-+ struct atmel_mpopfb_info *sinfo = info->par;
-+ struct fb_info *lcdc_info = platform_get_drvdata(sinfo->lcdc_pdev);
-+
-+ dev_dbg(dev, "%s:\n", __func__);
-+ dev_dbg(dev, " resolution: %ux%u\n", var->xres, var->yres);
-+ dev_dbg(dev, " offset: (%u,%u)\n", var->xoffset, var->yoffset);
-+ dev_dbg(dev, " bpp: %u\n", var->bits_per_pixel);
-+
-+ /*
-+ * FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal!
-+ * as FB_VMODE_SMOOTH_XPAN is only used internally
-+ */
-+
-+ if (var->vmode & FB_VMODE_CONUPDATE) {
-+ var->vmode |= FB_VMODE_YWRAP;
-+ var->xoffset = info->var.xoffset;
-+ var->yoffset = info->var.yoffset;
-+ }
-+
-+ /* Horizontal size must be a multiple of 16 pixels */
-+
-+ /*
-+ * Some very basic checks
-+ */
-+ if (!var->xres)
-+ var->xres = 1;
-+ if (!var->yres)
-+ var->yres = 1;
-+ if (var->xres > var->xres_virtual)
-+ var->xres_virtual = var->xres;
-+ if (var->yres > var->yres_virtual)
-+ var->yres_virtual = var->yres;
-+ if (var->bits_per_pixel > 16)
-+ var->bits_per_pixel = 24;
-+ else if (var->bits_per_pixel > 12)
-+ var->bits_per_pixel = 16;
-+ else
-+ var->bits_per_pixel = 12;
-+
-+ /* Horizontal size and offset must be a multiple of 16 pixels */
-+ var->xres = (var->xres + 15) & ~15UL;
-+ var->xres_virtual = (var->xres_virtual + 15) & ~15UL;
-+ var->xoffset = (var->xoffset + 15) & ~15UL;
-+
-+ if (var->xres_virtual < var->xoffset + var->xres)
-+ var->xres_virtual = var->xoffset + var->xres;
-+ if (var->yres_virtual < var->yoffset + var->yres)
-+ var->yres_virtual = var->yoffset + var->yres;
-+
-+ /* Check that the scaled image will fit into the LCD display. */
-+ if (sinfo->baseimg_info.xsize > lcdc_info->var.xres) {
-+ dev_err(dev, "baseimage is wider than screen: %d > %d\n",
-+ sinfo->baseimg_info.xsize, lcdc_info->var.xres);
-+ return -EINVAL;
-+ }
-+
-+ if (sinfo->baseimg_info.ysize > lcdc_info->var.yres) {
-+ dev_err(dev, "baseimage is higher than screen: %d > %d\n",
-+ sinfo->baseimg_info.ysize, lcdc_info->var.yres);
-+ return -EINVAL;
-+ }
-+
-+ /* Check that it is possible to scale to given size. */
-+ if (ATMEL_MPOP_CALC_SCALE(var->xres, sinfo->baseimg_info.xsize) == 0
-+ || (ATMEL_MPOP_CALC_SCALE(var->xres,
-+ sinfo->baseimg_info.xsize)
-+ > (4 << ATMEL_MPOP_RESIZE_FRAC_BITS))) {
-+ dev_err(dev, "cannot scale from width %d to %d Max %s\n",
-+ var->xres, sinfo->baseimg_info.xsize,
-+ ATMEL_MPOP_CALC_SCALE(var->xres,
-+ sinfo->baseimg_info.xsize)
-+ ? "downscale factor is 4!"
-+ : "upscale factor is 32");
-+ return -EINVAL;
-+ }
-+
-+ if (ATMEL_MPOP_CALC_SCALE(var->yres, sinfo->baseimg_info.ysize) == 0
-+ || (ATMEL_MPOP_CALC_SCALE(var->yres,
-+ sinfo->baseimg_info.ysize)
-+ > (4 << ATMEL_MPOP_RESIZE_FRAC_BITS))) {
-+ dev_err(dev, "cannot scale from height %d to %d Max %s\n",
-+ var->yres, sinfo->baseimg_info.ysize,
-+ ATMEL_MPOP_CALC_SCALE(var->yres,
-+ sinfo->baseimg_info.ysize)
-+ ? "downscale factor is 4!"
-+ : "upscale factor is 32");
-+ return -EINVAL;
-+ }
-+
-+ var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
-+ var->transp.msb_right = 0;
-+ var->transp.offset = var->transp.length = 0;
-+
-+ switch (var->bits_per_pixel) {
-+ case 12:
-+ case 16:
-+ case 24:
-+ var->red.offset = 0;
-+ var->green.offset = 8;
-+ var->blue.offset = 16;
-+ var->red.length = var->green.length = var->blue.length = 8;
-+ break;
-+ default:
-+ dev_err(dev, "color depth %d not supported\n",
-+ var->bits_per_pixel);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static void atmel_mpopfb_start(struct atmel_mpopfb_info *sinfo)
-+{
-+ if (!sinfo->running) {
-+ dev_dbg(sinfo->info->device, " * Starting MPOP.\n");
-+
-+ /* Enable all error interrupts. */
-+ mpop_writel(sinfo, ATMEL_MPOP_INTEN, 0x7);
-+
-+ /*
-+ * Enable the MPOP. When the LCD controller starts
-+ * reading from the slave interface it will start
-+ * generating a frame.
-+ */
-+ mpop_writel(sinfo, ATMEL_MPOP_CR,
-+ ATMEL_MPOP_CR_EN_MASK
-+ /*| ATMEL_MPOP_CR_OUT_BGR_MASK */ );
-+
-+ sinfo->running = 1;
-+ }
-+}
-+
-+static void atmel_mpopfb_stop(struct atmel_mpopfb_info *sinfo)
-+{
-+ if (!sinfo->running)
-+ /* Not running. Already stopped. */
-+ return;
-+
-+ dev_dbg(sinfo->info->device, "Stopping MPOP.\n");
-+
-+ /* Disable the MPOP. This will force the MPOP to be reset. */
-+ mpop_writel(sinfo, ATMEL_MPOP_CR, 0);
-+
-+ /* Disable all interrupts. */
-+ mpop_writel(sinfo, ATMEL_MPOP_INTDIS, ~0UL);
-+
-+ /* Looks like we stopped the MPOP... */
-+ dev_dbg(sinfo->info->device, "MPOP stopped.\n");
-+
-+ sinfo->running = 0;
-+}
-+
-+static void atmel_mpopfb_connect_to_lcdc(struct atmel_mpopfb_info *sinfo)
-+{
-+ struct fb_info *lcdc_info = platform_get_drvdata(sinfo->lcdc_pdev);
-+
-+ dev_dbg(sinfo->info->device, "Connecting MPOP to LCDC:\n");
-+
-+ /* Start the mpop if it is not running. */
-+ atmel_mpopfb_start(sinfo);
-+
-+ if (sinfo->connected_to_lcdc)
-+ /* Already connected. */
-+ return;
-+
-+ /*
-+ * Set framebuffer pointer in LCDC to point to the slave
-+ * interface of the MPOP.
-+ */
-+ dev_dbg(sinfo->info->device, " * Attaching to LCDC.\n");
-+ sinfo->lcdc_old_smem_start = lcdc_info->fix.smem_start;
-+ lcdc_info->fix.smem_start = (unsigned long)sinfo->slave_base;
-+ sinfo->lcdc_old_bits_per_pixel = lcdc_info->var.bits_per_pixel;
-+ lcdc_info->var.bits_per_pixel = 32;
-+
-+ /* Force the LCDC to change the configuration. */
-+ lcdc_info->fbops->fb_set_par(lcdc_info);
-+
-+ sinfo->connected_to_lcdc = 1;
-+}
-+
-+static void atmel_mpopfb_disconnect_from_lcdc(struct atmel_mpopfb_info *sinfo)
-+{
-+ struct fb_info *lcdc_info = platform_get_drvdata(sinfo->lcdc_pdev);
-+
-+ dev_dbg(sinfo->info->device, "Disconnecting MPOP from LCDC:\n");
-+
-+ if (!sinfo->connected_to_lcdc)
-+ /* Already disconnected. */
-+ return;
-+
-+ /* Restore lcdc's old framebuffer pointer and pixel-format. */
-+ lcdc_info->fix.smem_start = sinfo->lcdc_old_smem_start;
-+ lcdc_info->var.bits_per_pixel = sinfo->lcdc_old_bits_per_pixel;
-+
-+ /* Force the LCDC to change the configuration. */
-+ lcdc_info->fbops->fb_set_par(lcdc_info);
-+
-+ sinfo->connected_to_lcdc = 0;
-+
-+ /* We must stop the mpop to reset it. */
-+ atmel_mpopfb_stop(sinfo);
-+}
-+
-+static void atmel_mpopfb_put_overlay_palette(struct atmel_mpopfb_info *sinfo,
-+ struct atmel_mpopfb_overlay_palette *palette)
-+{
-+ int i;
-+
-+ dev_dbg(sinfo->info->device, "Overlay palette = :\n");
-+ for (i = 0; i < 256; i++) {
-+ dev_dbg(sinfo->info->device, "%d -> 0x%x\n", i,
-+ *((int *)&palette->entry[i]));
-+ mpop_writel(sinfo, ATMEL_MPOP_PALETTEDATA + 4 * i,
-+ *((int *)&palette->entry[i]));
-+ }
-+}
-+
-+static void atmel_mpopfb_get_overlay_palette(struct atmel_mpopfb_info *sinfo,
-+ struct atmel_mpopfb_overlay_palette *palette)
-+{
-+ int i;
-+
-+ for (i = 0; i < 256; i++)
-+ *((int *)&palette->entry[i]) =
-+ mpop_readl(sinfo, ATMEL_MPOP_PALETTEDATA + 4 * i);
-+}
-+
-+static void atmel_mpopfb_put_cursor_palette(struct atmel_mpopfb_info *sinfo,
-+ struct atmel_mpopfb_cursor_palette *palette)
-+{
-+ int i;
-+ for (i = 0; i < 4; i++)
-+ mpop_writel(sinfo, ATMEL_MPOP_CURSOR_P0 + 4 * i,
-+ *((int *)&palette->entry[i]));
-+}
-+
-+static void atmel_mpopfb_get_cursor_palette(struct atmel_mpopfb_info *sinfo,
-+ struct atmel_mpopfb_cursor_palette *palette)
-+{
-+ int i;
-+ for (i = 0; i < 4; i++)
-+ *((int *)&palette->entry[i])
-+ = mpop_readl(sinfo, ATMEL_MPOP_CURSOR_P0 + 4 * i);
-+}
-+
-+/**
-+ * atmel_mpopfb_set_par - Alters the hardware state.
-+ * @info: frame buffer structure that represents a single frame buffer
-+ *
-+ * Using the fb_var_screeninfo in fb_info we set the resolution
-+ * of the this particular framebuffer. This function alters the
-+ * par AND the fb_fix_screeninfo stored in fb_info. It doesn't
-+ * not alter var in fb_info since we are using that data. This
-+ * means we depend on the data in var inside fb_info to be
-+ * supported by the hardware. atmel_lcdfb_check_var is always called
-+ * before atmel_lcdfb_set_par to ensure this. Again if you can't
-+ * change the resolution you don't need this function.
-+ *
-+ */
-+static int atmel_mpopfb_set_par(struct fb_info *info)
-+{
-+ struct atmel_mpopfb_info *sinfo = info->par;
-+ struct fb_info *lcdc_info = platform_get_drvdata(sinfo->lcdc_pdev);
-+ struct fb_var_screeninfo *var = &info->var;
-+
-+ u32 yuv_format;
-+ u32 xscale, yscale;
-+
-+ dev_dbg(info->device, "%s:\n", __func__);
-+ dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n",
-+ info->var.xres, info->var.yres,
-+ info->var.xres_virtual, info->var.yres_virtual);
-+ dev_dbg(info->device, " * offset: (%u,%u)\n",
-+ info->var.xoffset, info->var.yoffset);
-+ dev_dbg(info->device, " * bpp: %u\n", info->var.bits_per_pixel);
-+
-+ /* Setup the output picture size. We must use the size of the lcdcfb. */
-+ dev_dbg(info->device, " * output frame resolution: %ux%u \n",
-+ lcdc_info->var.xres, lcdc_info->var.yres);
-+ mpop_writel(sinfo, ATMEL_MPOP_DISP_MAX_COORD,
-+ ((lcdc_info->var.xres - 1) << ATMEL_MPOP_DISP_MAX_COORD_X_OFFSET)
-+ | ((lcdc_info->var.yres - 1) << ATMEL_MPOP_DISP_MAX_COORD_Y_OFFSET));
-+
-+ /* Setup base picture. */
-+
-+ switch (var->bits_per_pixel) {
-+ default:
-+ case 12:
-+ yuv_format = ATMEL_MPOP_YUVFORMAT_420;
-+ break;
-+ case 16:
-+ yuv_format = ATMEL_MPOP_YUVFORMAT_422;
-+ break;
-+ case 24:
-+ yuv_format = ATMEL_MPOP_YUVFORMAT_444;
-+ break;
-+ }
-+
-+ xscale = ATMEL_MPOP_CALC_SCALE(info->var.xres, sinfo->baseimg_info.xsize);
-+ yscale = ATMEL_MPOP_CALC_SCALE(info->var.yres, sinfo->baseimg_info.ysize);
-+
-+ dev_dbg(info->device, " * baseimg output size = %ux%u \n",
-+ sinfo->baseimg_info.xsize, sinfo->baseimg_info.ysize);
-+ dev_dbg(info->device, " * resize scales = %ux%u \n", xscale, yscale);
-+ dev_dbg(info->device, " * yuv format = %u \n", yuv_format);
-+ mpop_writel(sinfo, ATMEL_MPOP_YCR,
-+ yuv_format << ATMEL_MPOP_YCR_YUVFORMAT_OFFSET
-+ | xscale << ATMEL_MPOP_YCR_XRESIZE_OFFSET
-+ | yscale << ATMEL_MPOP_YCR_YRESIZE_OFFSET);
-+
-+ /* Setup conversion coefficients. */
-+ mpop_writel(sinfo, ATMEL_MPOP_R2R1,
-+ ((sinfo->rgbconv_coeffs.r1 << ATMEL_MPOP_R1_OFFSET) & ATMEL_MPOP_R1_MASK)
-+ | ((sinfo->rgbconv_coeffs.r2 << ATMEL_MPOP_R2_OFFSET) & ATMEL_MPOP_R2_MASK));
-+ mpop_writel(sinfo, ATMEL_MPOP_R4R3,
-+ ((sinfo->rgbconv_coeffs.r3 << ATMEL_MPOP_R3_OFFSET) & ATMEL_MPOP_R3_MASK)
-+ | ((sinfo->rgbconv_coeffs.r4 << ATMEL_MPOP_R4_OFFSET) & ATMEL_MPOP_R4_MASK));
-+ mpop_writel(sinfo, ATMEL_MPOP_G2G1,
-+ ((sinfo->rgbconv_coeffs.g1 << ATMEL_MPOP_G1_OFFSET) & ATMEL_MPOP_G1_MASK)
-+ | ((sinfo->rgbconv_coeffs.g2 << ATMEL_MPOP_G2_OFFSET) & ATMEL_MPOP_G2_MASK));
-+ mpop_writel(sinfo, ATMEL_MPOP_G4G3,
-+ ((sinfo->rgbconv_coeffs.g3 << ATMEL_MPOP_G3_OFFSET) & ATMEL_MPOP_G3_MASK)
-+ | ((sinfo->rgbconv_coeffs.g4 << ATMEL_MPOP_G4_OFFSET) & ATMEL_MPOP_G4_MASK));
-+ mpop_writel(sinfo, ATMEL_MPOP_B2B1,
-+ ((sinfo->rgbconv_coeffs.b1 << ATMEL_MPOP_B1_OFFSET) & ATMEL_MPOP_B1_MASK)
-+ | ((sinfo->rgbconv_coeffs.b2 << ATMEL_MPOP_B2_OFFSET) & ATMEL_MPOP_B2_MASK));
-+ mpop_writel(sinfo, ATMEL_MPOP_B4B3,
-+ ((sinfo->rgbconv_coeffs.b3 << ATMEL_MPOP_B3_OFFSET) & ATMEL_MPOP_B3_MASK)
-+ | ((sinfo->rgbconv_coeffs.b4 << ATMEL_MPOP_B4_OFFSET) & ATMEL_MPOP_B4_MASK));
-+
-+ info->fix.line_length = info->var.xres_virtual;
-+ info->fix.visual = FB_VISUAL_TRUECOLOR;
-+
-+ /* Setup stride. We can flip the image by negating the
-+ stride, but we must then set the SAR registers to point
-+ to the last line in the image. */
-+ if (sinfo->baseimg_info.flip) {
-+ dev_dbg(info->device, " * flip \n");
-+ mpop_writel(sinfo, ATMEL_MPOP_STRIDE, -info->var.xres_virtual);
-+ } else
-+ mpop_writel(sinfo, ATMEL_MPOP_STRIDE, info->var.xres_virtual);
-+
-+ /* Setup input image size. */
-+ mpop_writel(sinfo, ATMEL_MPOP_YUV_MAX_COORD,
-+ ((info->var.xres - 1) << ATMEL_MPOP_YUV_MAX_COORD_X_OFFSET)
-+ | ((info->var.yres - 1) << ATMEL_MPOP_YUV_MAX_COORD_Y_OFFSET));
-+
-+ /* Setup size and position of output base image after scaling. */
-+ mpop_writel(sinfo, ATMEL_MPOP_RGB_SIZE,
-+ sinfo->baseimg_info.xsize << ATMEL_MPOP_RGB_SIZE_X_OFFSET
-+ | sinfo->baseimg_info.ysize << ATMEL_MPOP_RGB_SIZE_Y_OFFSET);
-+
-+ mpop_writel(sinfo, ATMEL_MPOP_RGB_POS,
-+ (sinfo->baseimg_info.xpos << ATMEL_MPOP_RGB_POS_X_OFFSET)
-+ | (sinfo->baseimg_info.ypos << ATMEL_MPOP_RGB_POS_Y_OFFSET));
-+
-+ dev_dbg(info->device, " * baseimg pos: (%u,%u) \n",
-+ sinfo->baseimg_info.xpos, sinfo->baseimg_info.ypos);
-+
-+ /* Setup Word Transfer Count. */
-+ mpop_writel(sinfo, ATMEL_MPOP_RGB_WTC,
-+ DIV_ROUND_UP(info->var.xres * info->var.yres
-+ * var->bits_per_pixel, 32));
-+
-+ /* Set overlay parameters. */
-+ mpop_writel(sinfo, ATMEL_MPOP_O1_POS,
-+ (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].xpos << ATMEL_MPOP_O1_POS_O1_POS_X)
-+ | (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].ypos << ATMEL_MPOP_O1_POS_O1_POS_Y));
-+ mpop_writel(sinfo, ATMEL_MPOP_O1_SIZE,
-+ (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].xsize << ATMEL_MPOP_O1_SIZE_O1_SIZE_X)
-+ | (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].ysize << ATMEL_MPOP_O1_SIZE_O1_SIZE_Y));
-+ mpop_writel(sinfo, ATMEL_MPOP_O1_WTC,
-+ DIV_ROUND_UP(sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].xsize
-+ * sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].ysize, 4));
-+
-+ mpop_writel(sinfo, ATMEL_MPOP_O2_POS,
-+ (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].xpos << ATMEL_MPOP_O2_POS_O2_POS_X)
-+ | (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].ypos << ATMEL_MPOP_O2_POS_O2_POS_Y));
-+ mpop_writel(sinfo, ATMEL_MPOP_O2_SIZE,
-+ (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].xsize << ATMEL_MPOP_O2_SIZE_O2_SIZE_X)
-+ | (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].ysize << ATMEL_MPOP_O2_SIZE_O2_SIZE_Y));
-+ mpop_writel(sinfo, ATMEL_MPOP_O2_WTC,
-+ DIV_ROUND_UP(sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].xsize *
-+ sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].ysize, 4));
-+
-+ mpop_writel(sinfo, ATMEL_MPOP_CURSOR_POS,
-+ (sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].xpos << ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X)
-+ | (sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].ypos << ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y));
-+ mpop_writel(sinfo, ATMEL_MPOP_CURSOR_SIZE,
-+ (sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].xsize << ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X)
-+ | (sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].ysize << ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y));
-+ mpop_writel(sinfo, ATMEL_MPOP_CURSOR_WTC,
-+ DIV_ROUND_UP(sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].xsize
-+ * sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].ysize, 16));
-+
-+ /* Enable base overlay + any other enabled overlays. */
-+ mpop_writel(sinfo, ATMEL_MPOP_OCR, ATMEL_MPOP_OCR_RGBEN_MASK);
-+
-+ if (sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].enabled)
-+ mpop_writel(sinfo, ATMEL_MPOP_OCR,
-+ mpop_readl(sinfo, ATMEL_MPOP_OCR)
-+ | ATMEL_MPOP_OCR_CURSOREN_MASK);
-+ if (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].enabled)
-+ mpop_writel(sinfo, ATMEL_MPOP_OCR,
-+ mpop_readl(sinfo, ATMEL_MPOP_OCR)
-+ | ATMEL_MPOP_OCR_O1EN_MASK);
-+ if (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].enabled)
-+ mpop_writel(sinfo, ATMEL_MPOP_OCR,
-+ mpop_readl(sinfo, ATMEL_MPOP_OCR)
-+ | ATMEL_MPOP_OCR_O2EN_MASK);
-+
-+ /* Set background to black. */
-+ mpop_writel(sinfo, ATMEL_MPOP_BGCOLOR, 0);
-+
-+ /* Setup source address registers */
-+ atmel_mpopfb_update_sar(info, &info->var);
-+
-+ dev_dbg(info->device, " * DONE\n");
-+
-+ return 0;
-+}
-+
-+static int atmel_mpopfb_pan_display(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ dev_dbg(info->device, "%s\n", __func__);
-+
-+ /* Change source address registers to reflect the panning. */
-+ atmel_mpopfb_update_sar(info, var);
-+
-+ return 0;
-+}
-+
-+static void atmel_mpopfb_put_overlay_info(struct fb_info *info,
-+ struct atmel_mpopfb_overlay_info overlay_info)
-+{
-+ struct atmel_mpopfb_info *sinfo = info->par;
-+
-+ /* We can update the position now since it is double buffered. */
-+ switch (overlay_info.overlay) {
-+ case ATMEL_MPOPFB_OVERLAY1:
-+ mpop_writel(sinfo, ATMEL_MPOP_O1_POS,
-+ (overlay_info.xpos << ATMEL_MPOP_O1_POS_O1_POS_X)
-+ | (overlay_info.ypos << ATMEL_MPOP_O1_POS_O1_POS_Y));
-+ break;
-+ case ATMEL_MPOPFB_OVERLAY2:
-+ mpop_writel(sinfo, ATMEL_MPOP_O2_POS,
-+ (overlay_info.xpos << ATMEL_MPOP_O2_POS_O2_POS_X)
-+ | (overlay_info.ypos << ATMEL_MPOP_O2_POS_O2_POS_Y));
-+ break;
-+ case ATMEL_MPOPFB_CURSOR:
-+ mpop_writel(sinfo, ATMEL_MPOP_CURSOR_POS,
-+ (overlay_info.xpos << ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X)
-+ | (overlay_info.ypos << ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y));
-+ break;
-+ default:
-+ dev_warn(info->device, "Unknown overlay type: %d\n",
-+ overlay_info.overlay);
-+ return;
-+ }
-+
-+ /* Copy the overlay info to the mpopfb info structure. */
-+ sinfo->overlay_info[overlay_info.overlay] = overlay_info;
-+}
-+
-+static int atmel_mpopfb_ioctl(struct fb_info *info,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ void __user *argp = (void __user *)arg;
-+ struct atmel_mpopfb_info *sinfo = info->par;
-+ struct atmel_mpopfb_overlay_info overlay_info;
-+
-+ switch (cmd) {
-+ case ATMEL_MPOP_FBIOPUT_OVERLAY_PALETTE:{
-+ struct atmel_mpopfb_overlay_palette palette;
-+ if (copy_from_user(&palette, argp, sizeof(palette)))
-+ return -EFAULT;
-+ atmel_mpopfb_put_overlay_palette(sinfo, &palette);
-+ return 0;
-+ }
-+ case ATMEL_MPOP_FBIOGET_OVERLAY_PALETTE:{
-+ struct atmel_mpopfb_overlay_palette palette;
-+ atmel_mpopfb_get_overlay_palette(sinfo, &palette);
-+ if (copy_to_user(argp, &palette, sizeof(palette)))
-+ return -EFAULT;
-+ return 0;
-+ }
-+ case ATMEL_MPOP_FBIOPUT_CURSOR_PALETTE:{
-+ struct atmel_mpopfb_cursor_palette palette;
-+ if (copy_from_user(&palette, argp, sizeof(palette)))
-+ return -EFAULT;
-+ atmel_mpopfb_put_cursor_palette(sinfo, &palette);
-+ return 0;
-+ }
-+ case ATMEL_MPOP_FBIOGET_CURSOR_PALETTE:{
-+ struct atmel_mpopfb_cursor_palette palette;
-+ atmel_mpopfb_get_cursor_palette(sinfo, &palette);
-+ if (copy_to_user(argp, &palette, sizeof(palette)))
-+ return -EFAULT;
-+ return 0;
-+ }
-+ case ATMEL_MPOP_FBIOPUT_OVERLAY_INFO:
-+ if (copy_from_user(&overlay_info, argp, sizeof(overlay_info)))
-+ return -EFAULT;
-+ atmel_mpopfb_put_overlay_info(info, overlay_info);
-+ return 0;
-+ case ATMEL_MPOP_FBIOPUT_BASEIMG_INFO:
-+ if (copy_from_user(&sinfo->baseimg_info, argp,
-+ sizeof(sinfo->baseimg_info)))
-+ return -EFAULT;
-+
-+ /* Check that new baseimg parameters are sane. */
-+ if (atmel_mpopfb_check_var(&info->var, info))
-+ return -EFAULT;
-+
-+ /* Update hardware configuration. */
-+ atmel_mpopfb_set_par(info);
-+ return 0;
-+ case ATMEL_MPOP_FBIOGET_BASEIMG_INFO:
-+ return copy_to_user(argp, &sinfo->baseimg_info,
-+ sizeof(sinfo->baseimg_info)) ? -EFAULT : 0;
-+ case ATMEL_MPOP_FBIOPUT_RGBCONV_COEFFS:
-+ if (copy_from_user(&sinfo->rgbconv_coeffs, argp,
-+ sizeof(sinfo->rgbconv_coeffs)))
-+ return -EFAULT;
-+
-+ /* Update hardware configuration. */
-+ if (atmel_mpopfb_set_par(info))
-+ return -EFAULT;
-+
-+ return 0;
-+ case ATMEL_MPOP_FBIOGET_RGBCONV_COEFFS:
-+ return copy_to_user(argp, &sinfo->rgbconv_coeffs,
-+ sizeof(sinfo->rgbconv_coeffs)) ? -EFAULT : 0;
-+ case ATMEL_MPOP_FBIO_CONNECT_TO_LCDC:
-+ atmel_mpopfb_connect_to_lcdc(sinfo);
-+ return 0;
-+ case ATMEL_MPOP_FBIO_DISCONNECT_FROM_LCDC:
-+ atmel_mpopfb_disconnect_from_lcdc(sinfo);
-+ return 0;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ /* Force MPOP to be updated with any new parameters. */
-+ atmel_mpopfb_set_par(info);
-+}
-+
-+static int atmel_mpopfb_setcolreg(unsigned int regno, unsigned int red,
-+ unsigned int green, unsigned int blue,
-+ unsigned int transp, struct fb_info *info)
-+{
-+ return 0;
-+}
-+
-+static struct fb_ops atmel_mpopfb_ops = {
-+ .owner = THIS_MODULE,
-+ .fb_check_var = atmel_mpopfb_check_var,
-+ .fb_set_par = atmel_mpopfb_set_par,
-+ .fb_setcolreg = atmel_mpopfb_setcolreg,
-+ .fb_pan_display = atmel_mpopfb_pan_display,
-+ .fb_imageblit = cfb_imageblit,
-+ .fb_ioctl = atmel_mpopfb_ioctl,
-+ .fb_fillrect = cfb_fillrect,
-+ .fb_copyarea = cfb_copyarea,
-+};
-+
-+static irqreturn_t atmel_mpopfb_interrupt(int irq, void *dev_id)
-+{
-+ struct fb_info *info = dev_id;
-+ struct atmel_mpopfb_info *sinfo = info->par;
-+ u32 status;
-+
-+ /* Check which interrupt we have. */
-+ status = mpop_readl(sinfo, ATMEL_MPOP_INTSTATUS);
-+
-+ /* Clear interrupts. */
-+ mpop_writel(sinfo, ATMEL_MPOP_INTCLEAR, status);
-+
-+ if (status & ATMEL_MPOP_EOP) {
-+ /* End Of Picture. Start new picture. */
-+ mpop_writel(sinfo, ATMEL_MPOP_CR,
-+ ATMEL_MPOP_CR_START_MASK
-+ | mpop_readl(sinfo, ATMEL_MPOP_CR));
-+ } else if (status & ATMEL_MPOP_OUT) {
-+ dev_err(info->dev,
-+ "MPOP Output DMA interface Bus Error (address=0x%x)!\n",
-+ mpop_readl(sinfo, ATMEL_MPOP_OUT_BEAR));
-+ } else if (status & ATMEL_MPOP_YUV) {
-+ dev_err(info->dev,
-+ "MPOP YUV Picture Fetch DMA interface Bus Error (address=0x%x)!\n",
-+ mpop_readl(sinfo, ATMEL_MPOP_YUV_BEAR));
-+ } else if (status & ATMEL_MPOP_OVERLAY) {
-+ dev_err(info->dev,
-+ "MPOP Overlay Picture Fetch DMA interface Bus Error (address=0x%x)!\n",
-+ mpop_readl(sinfo, ATMEL_MPOP_OVERLAY_BEAR));
-+ }
-+
-+ dev_dbg(info->device, "%s\n", __func__);
-+ dev_dbg(info->device, " * status: 0x%x \n", status);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init atmel_mpopfb_init_fbinfo(struct atmel_mpopfb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+ int ret = 0;
-+
-+ info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
-+
-+ dev_info(info->device,
-+ "%luKiB frame buffer at %08lx (mapped at %p)\n",
-+ (unsigned long)info->fix.smem_len / 1024,
-+ (unsigned long)info->fix.smem_start, info->screen_base);
-+
-+ return ret;
-+}
-+
-+static void atmel_mpopfb_start_clock(struct atmel_mpopfb_info *sinfo)
-+{
-+ clk_enable(sinfo->mpop_hclk);
-+ clk_enable(sinfo->mpop_pclk);
-+}
-+
-+static void atmel_mpopfb_stop_clock(struct atmel_mpopfb_info *sinfo)
-+{
-+ clk_disable(sinfo->mpop_hclk);
-+ clk_disable(sinfo->mpop_pclk);
-+}
-+
-+static int __init atmel_mpopfb_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info;
-+ struct fb_info *lcdc_info;
-+ struct atmel_mpopfb_info *sinfo;
-+ struct atmel_mpopfb_info *pdata_sinfo;
-+ struct resource *regs = NULL;
-+ struct resource *slave = NULL;
-+ struct resource *map = NULL;
-+ int ret;
-+
-+ dev_dbg(dev, "%s BEGIN\n", __func__);
-+
-+ ret = -ENOMEM;
-+ info = framebuffer_alloc(sizeof(struct atmel_mpopfb_info), dev);
-+ if (!info) {
-+ dev_err(dev, "cannot allocate memory\n");
-+ goto out;
-+ }
-+
-+ sinfo = info->par;
-+
-+ if (dev->platform_data) {
-+ pdata_sinfo = dev->platform_data;
-+ sinfo->lcdc_pdev = pdata_sinfo->lcdc_pdev;
-+ if (!sinfo->lcdc_pdev) {
-+ dev_err(dev, "cannot get hold of lcdcfb device\n");
-+ goto free_info;
-+ }
-+ } else {
-+ dev_err(dev, "cannot get default configuration\n");
-+ goto free_info;
-+ }
-+
-+ sinfo->info = info;
-+ sinfo->pdev = pdev;
-+ sinfo->running = 0;
-+ sinfo->connected_to_lcdc = 0;
-+ sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].enabled = 0;
-+ sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].enabled = 0;
-+ sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].enabled = 0;
-+
-+ /* Setup default info */
-+
-+ /* Set fb_var_screeninfo equal to that of the lcdcfb driver. */
-+ lcdc_info = (struct fb_info *)platform_get_drvdata(sinfo->lcdc_pdev);
-+ memcpy(&info->var, &lcdc_info->var, sizeof(struct fb_var_screeninfo));
-+
-+ /* Set default position of the image on the screen to (0,0) and
-+ no scaling */
-+ sinfo->baseimg_info.xpos = 0;
-+ sinfo->baseimg_info.ypos = 0;
-+ sinfo->baseimg_info.xsize = info->var.xres;
-+ sinfo->baseimg_info.ysize = info->var.yres;
-+
-+ /* Use YCbCr --> RGB converion per default. */
-+ memcpy(&sinfo->rgbconv_coeffs, &atmel_mpop_ycrcb2rgb_coeffs,
-+ sizeof(struct atmel_mpopfb_rgbconv_coeffs));
-+
-+ strcpy(info->fix.id, sinfo->pdev->name);
-+ info->flags = ATMEL_MPOPFB_FBINFO_DEFAULT;
-+ info->fbops = &atmel_mpopfb_ops;
-+
-+ //memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
-+ info->fix = atmel_mpopfb_fix;
-+
-+ /* Enable MPOP Clocks */
-+ sinfo->mpop_hclk = clk_get(dev, "hclk");
-+ sinfo->mpop_pclk = clk_get(dev, "pclk");
-+ if (IS_ERR(sinfo->mpop_hclk)) {
-+ ret = PTR_ERR(sinfo->mpop_hclk);
-+ goto put_bus_clk;
-+ }
-+ if (IS_ERR(sinfo->mpop_pclk)) {
-+ ret = PTR_ERR(sinfo->mpop_pclk);
-+ goto stop_clk;
-+ }
-+ atmel_mpopfb_start_clock(sinfo);
-+
-+ //ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
-+ // info->monspecs.modedb_len, info->monspecs.modedb,
-+ // sinfo->default_bpp);
-+ //if (!ret) {
-+ // dev_err(dev, "no suitable video mode found\n");
-+ // goto stop_clk;
-+ //}
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_err(dev, "resources unusable\n");
-+ ret = -ENXIO;
-+ goto stop_clk;
-+ }
-+
-+ slave = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+ if (!slave) {
-+ dev_err(dev, "slave interface memory resource unusable\n");
-+ ret = -ENXIO;
-+ goto stop_clk;
-+ }
-+ sinfo->slave_base = (void *)slave->start;
-+
-+ sinfo->irq_base = platform_get_irq(pdev, 0);
-+ if (sinfo->irq_base < 0) {
-+ dev_err(dev, "unable to get irq\n");
-+ ret = sinfo->irq_base;
-+ goto stop_clk;
-+ }
-+
-+ /* Initialize video memory */
-+ map = platform_get_resource(pdev, IORESOURCE_MEM, 2);
-+ if (map) {
-+ /* use a pre-allocated memory buffer */
-+ info->fix.smem_start = map->start;
-+ info->fix.smem_len = map->end - map->start + 1;
-+ if (!request_mem_region(info->fix.smem_start,
-+ info->fix.smem_len, pdev->name)) {
-+ //ret = -EBUSY;
-+ //goto stop_clk;
-+ /* Probably in use by LCD controller. */
-+ info->screen_base = lcdc_info->screen_base;
-+ } else {
-+ info->screen_base =
-+ ioremap(info->fix.smem_start, info->fix.smem_len);
-+ if (!info->screen_base)
-+ goto release_intmem;
-+ }
-+ } else {
-+ /* alocate memory buffer */
-+ ret = atmel_mpopfb_alloc_video_memory(sinfo);
-+ if (ret < 0) {
-+ dev_err(dev, "cannot allocate mpop framebuffer: %d\n",
-+ ret);
-+ goto stop_clk;
-+ }
-+ }
-+
-+ /* MPOP registers */
-+ info->fix.mmio_start = regs->start;
-+ info->fix.mmio_len = regs->end - regs->start + 1;
-+
-+ if (!request_mem_region(info->fix.mmio_start,
-+ info->fix.mmio_len, pdev->name)) {
-+ ret = -EBUSY;
-+ goto free_fb;
-+ }
-+
-+ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
-+ if (!sinfo->mmio) {
-+ dev_err(dev, "cannot map MPOP registers\n");
-+ goto release_mem;
-+ }
-+
-+ /* MPOP slave interface */
-+ if (!request_mem_region(slave->start,
-+ slave->end - slave->start + 1, pdev->name)) {
-+ dev_err(dev,
-+ "error requesting memory region for MPOP slave interface\n");
-+ ret = -EBUSY;
-+ goto unmap_mmio;
-+ }
-+
-+ /* interrupt */
-+ ret =
-+ request_irq(sinfo->irq_base, atmel_mpopfb_interrupt, 0, pdev->name,
-+ info);
-+ if (ret) {
-+ dev_err(dev, "request_irq failed: %d\n", ret);
-+ goto release_mem_slave;
-+ }
-+
-+ ret = atmel_mpopfb_init_fbinfo(sinfo);
-+ if (ret < 0) {
-+ dev_err(dev, "init fbinfo failed: %d\n", ret);
-+ goto unregister_irqs;
-+ }
-+
-+ /*
-+ * This makes sure that our colour bitfield
-+ * descriptors are correctly initialised.
-+ */
-+ atmel_mpopfb_check_var(&info->var, info);
-+
-+ ret = fb_set_var(info, &info->var);
-+ if (ret) {
-+ dev_warn(dev, "unable to set display parameters\n");
-+ goto free_cmap;
-+ }
-+
-+ dev_set_drvdata(dev, info);
-+
-+ /*
-+ * Tell the world that we're ready to go
-+ */
-+ ret = register_framebuffer(info);
-+ if (ret < 0) {
-+ dev_err(dev, "failed to register framebuffer device: %d\n",
-+ ret);
-+ goto free_cmap;
-+ }
-+
-+ dev_info(dev, "fb%d: Atmel MPOP at 0x%08lx (mapped at %p), irq %lu\n",
-+ info->node, info->fix.mmio_start, sinfo->mmio,
-+ sinfo->irq_base);
-+
-+ return 0;
-+
-+free_cmap:
-+ fb_dealloc_cmap(&info->cmap);
-+unregister_irqs:
-+ free_irq(sinfo->irq_base, info);
-+release_mem_slave:
-+ release_mem_region(slave->start, slave->end - slave->start + 1);
-+unmap_mmio:
-+ iounmap(sinfo->mmio);
-+release_mem:
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+free_fb:
-+ if (map)
-+ iounmap(info->screen_base);
-+ else
-+ atmel_mpopfb_free_video_memory(sinfo);
-+
-+release_intmem:
-+ if (map)
-+ release_mem_region(info->fix.smem_start, info->fix.smem_len);
-+stop_clk:
-+ atmel_mpopfb_stop_clock(sinfo);
-+ clk_put(sinfo->mpop_hclk);
-+put_bus_clk:
-+ if (sinfo->mpop_pclk)
-+ clk_put(sinfo->mpop_pclk);
-+free_info:
-+ framebuffer_release(info);
-+out:
-+ dev_dbg(dev, "%s FAILED\n", __func__);
-+ return ret;
-+}
-+
-+static int __exit atmel_mpopfb_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info = dev_get_drvdata(dev);
-+ struct atmel_mpopfb_info *sinfo = info->par;
-+
-+ if (!sinfo)
-+ return 0;
-+
-+ unregister_framebuffer(info);
-+ atmel_mpopfb_stop_clock(sinfo);
-+ clk_put(sinfo->mpop_hclk);
-+ clk_put(sinfo->mpop_pclk);
-+ fb_dealloc_cmap(&info->cmap);
-+ free_irq(sinfo->irq_base, info);
-+ iounmap(sinfo->mmio);
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+ if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
-+ iounmap(info->screen_base);
-+ release_mem_region(info->fix.smem_start, info->fix.smem_len);
-+ } else {
-+ atmel_mpopfb_free_video_memory(sinfo);
-+ }
-+
-+ dev_set_drvdata(dev, NULL);
-+ framebuffer_release(info);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver atmel_mpopfb_driver = {
-+ .remove = __exit_p(atmel_mpopfb_remove),
-+ .driver.name = "atmel_mpopfb",
-+ .driver.owner = THIS_MODULE,
-+};
-+
-+static int __init atmel_mpopfb_init(void)
-+{
-+ return platform_driver_probe(&atmel_mpopfb_driver, atmel_mpopfb_probe);
-+}
-+
-+static void __exit atmel_mpopfb_exit(void)
-+{
-+ platform_driver_unregister(&atmel_mpopfb_driver);
-+}
-+
-+module_init(atmel_mpopfb_init);
-+module_exit(atmel_mpopfb_exit);
-+
-+MODULE_DESCRIPTION("AT32 MPOP framebuffer driver");
-+MODULE_AUTHOR("Ronny Pedersen <rpedersen@atmel.com>");
-+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.28.2-0rig//drivers/video/Kconfig linux-2.6.28.2/drivers/video/Kconfig
---- linux-2.6.28.2-0rig//drivers/video/Kconfig 2009-01-29 08:39:31.000000000 +0100
-+++ linux-2.6.28.2/drivers/video/Kconfig 2009-01-29 08:52:50.000000000 +0100
-@@ -940,6 +940,15 @@
- help
- This enables support for the AT91/AT32 LCD Controller.
-
-+config FB_ATMEL_MPOP
-+ tristate "AT32 MPOP support"
-+ depends on FB && AVR32 && FB_ATMEL
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ help
-+ This enables support for the AT32 MPOP module.
-+
- config FB_INTSRAM
- bool "Frame Buffer in internal SRAM"
- depends on FB_ATMEL && ARCH_AT91SAM9261
-diff -urN linux-2.6.28.2-0rig//drivers/video/Makefile linux-2.6.28.2/drivers/video/Makefile
---- linux-2.6.28.2-0rig//drivers/video/Makefile 2009-01-29 08:39:31.000000000 +0100
-+++ linux-2.6.28.2/drivers/video/Makefile 2009-01-29 08:52:50.000000000 +0100
-@@ -89,6 +89,7 @@
- obj-$(CONFIG_FB_HIT) += hitfb.o
- obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
- obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
-+obj-$(CONFIG_FB_ATMEL_MPOP) += atmel_mpopfb.o
- obj-$(CONFIG_FB_PVR2) += pvr2fb.o
- obj-$(CONFIG_FB_VOODOO1) += sstfb.o
- obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
-diff -urN linux-2.6.28.2-0rig//include/linux/atmel_mpopfb.h linux-2.6.28.2/include/linux/atmel_mpopfb.h
---- linux-2.6.28.2-0rig//include/linux/atmel_mpopfb.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/include/linux/atmel_mpopfb.h 2009-01-29 08:52:50.000000000 +0100
-@@ -0,0 +1,112 @@
-+/*
-+ * Header file for AT32 MPOP FB Driver
-+ *
-+ * Data structure and register user interface
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ATMEL_MPOPFB_H__
-+#define __ATMEL_MPOPFB_H__
-+
-+#include <linux/fb.h>
-+#include <linux/ioctl.h>
-+
-+/* Coefficients for conversion to rgb. */
-+struct atmel_mpopfb_rgbconv_coeffs {
-+ int r1, r2, r3, r4;
-+ int g1, g2, g3, g4;
-+ int b1, b2, b3, b4;
-+};
-+
-+struct atmel_mpopfb_baseimg_info {
-+ /* Position of the mpop base image
-+ in the image sent to the LCD. */
-+ unsigned xpos;
-+ unsigned ypos;
-+
-+ /* The size of the base image after scaling. */
-+ unsigned xsize;
-+ unsigned ysize;
-+
-+ /* Signal that we should flip the video. */
-+ int flip;
-+
-+};
-+
-+enum atmel_mpopfb_overlay_type {
-+ ATMEL_MPOPFB_OVERLAY1 = 0,
-+ ATMEL_MPOPFB_OVERLAY2 = 1,
-+ ATMEL_MPOPFB_CURSOR = 2
-+};
-+
-+struct atmel_mpopfb_overlay_info {
-+ /* Position of the mpop overlay image
-+ in the image sent to the LCD. */
-+ unsigned xpos;
-+ unsigned ypos;
-+ /* The size of the overlay image. */
-+ unsigned xsize;
-+ unsigned ysize;
-+ /* Signal which overlay this info is for. */
-+ enum atmel_mpopfb_overlay_type overlay;
-+ /* Signal if the overlay is enabled. */
-+ unsigned enabled;
-+};
-+
-+struct atmel_mpopfb_overlay_palette_entry {
-+ unsigned char alpha;
-+ unsigned char red;
-+ unsigned char green;
-+ unsigned char blue;
-+};
-+
-+struct atmel_mpopfb_cursor_palette_entry {
-+ unsigned char:6;
-+ unsigned char invert:1;
-+ unsigned char visible:1;
-+ unsigned char red;
-+ unsigned char green;
-+ unsigned char blue;
-+};
-+
-+struct atmel_mpopfb_overlay_palette {
-+ struct atmel_mpopfb_overlay_palette_entry entry[256];
-+};
-+
-+struct atmel_mpopfb_cursor_palette {
-+ struct atmel_mpopfb_cursor_palette_entry entry[4];
-+};
-+
-+#define ATMEL_MPOP_FBIOPUT_BASEIMG_INFO _IOW('x',0,struct atmel_mpopfb_baseimg_info)
-+#define ATMEL_MPOP_FBIOGET_BASEIMG_INFO _IOR('x',1,struct atmel_mpopfb_baseimg_info)
-+#define ATMEL_MPOP_FBIOPUT_OVERLAY_INFO _IOW('x',2,struct atmel_mpopfb_overlay_info)
-+#define ATMEL_MPOP_FBIO_CONNECT_TO_LCDC _IO( 'x',4)
-+#define ATMEL_MPOP_FBIO_DISCONNECT_FROM_LCDC _IO( 'x',5)
-+#define ATMEL_MPOP_FBIOPUT_RGBCONV_COEFFS _IOW('x',6,struct atmel_mpopfb_rgbconv_coeffs)
-+#define ATMEL_MPOP_FBIOGET_RGBCONV_COEFFS _IOR('x',7,struct atmel_mpopfb_rgbconv_coeffs)
-+#define ATMEL_MPOP_FBIOPUT_OVERLAY_PALETTE _IOW('x',8,struct atmel_mpopfb_overlay_palette)
-+#define ATMEL_MPOP_FBIOGET_OVERLAY_PALETTE _IOR('x',9,struct atmel_mpopfb_overlay_palette)
-+#define ATMEL_MPOP_FBIOPUT_CURSOR_PALETTE _IOW('x',10,struct atmel_mpopfb_cursor_palette)
-+#define ATMEL_MPOP_FBIOGET_CURSOR_PALETTE _IOR('x',11,struct atmel_mpopfb_cursor_palette)
-+
-+#define ATMEL_MPOP_RESIZE_FRAC_BITS 5
-+#define ATMEL_MPOP_SCALE_FRAC_DIV(a,b) ((((a) << ATMEL_MPOP_RESIZE_FRAC_BITS))/(b))
-+#define ATMEL_MPOP_CALC_SCALE(from_res,to_res) ATMEL_MPOP_SCALE_FRAC_DIV(from_res, to_res)
-+
-+#define ATMEL_MPOP_COEFF_FRAC_BITS 8
-+
-+#endif
-diff -urN linux-2.6.28.2-0rig//include/linux/atmel_pdca.h linux-2.6.28.2/include/linux/atmel_pdca.h
---- linux-2.6.28.2-0rig//include/linux/atmel_pdca.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/include/linux/atmel_pdca.h 2009-01-29 08:52:50.000000000 +0100
-@@ -0,0 +1,120 @@
-+/*
-+ * Driver for the Atmel PDCA Peripheral DMA Controller
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ATMEL_PDCA_H
-+#define __ATMEL_PDCA_H
-+
-+#include <linux/dmaengine.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/list.h>
-+
-+struct pdca_pdata {
-+ unsigned int nr_channels;
-+};
-+
-+struct pdca_slave {
-+ struct dma_slave slave;
-+ u8 tx_periph_id;
-+ u8 rx_periph_id;
-+};
-+
-+struct pdca_desc {
-+ /* This controller does not support hardware descriptors */
-+ struct scatterlist *sg;
-+ int sg_len;
-+ u8 reg_width;
-+ u8 periph_id;
-+
-+ struct list_head desc_node;
-+ struct dma_async_tx_descriptor txd;
-+};
-+
-+struct pdca_chan {
-+ struct list_head freelist;
-+ struct list_head queue;
-+
-+ spinlock_t lock;
-+ void __iomem *regs;
-+
-+ struct scatterlist *cur_sg;
-+ struct scatterlist *next_sg;
-+
-+ struct tasklet_struct tasklet;
-+
-+ dma_cookie_t completed;
-+ struct dma_chan chan;
-+ struct pdca_slave *pslave;
-+ unsigned int descs_allocated;
-+ bool enabled;
-+};
-+
-+struct pdca_dev {
-+ struct clk *hclk;
-+ struct clk *pclk;
-+ struct dma_device dma;
-+ void __iomem *regs;
-+
-+ struct pdca_chan chan[];
-+};
-+
-+static inline struct pdca_slave *dma_to_pdca_slave(struct dma_slave *slave)
-+{
-+ return container_of(slave, struct pdca_slave, slave);
-+}
-+
-+static inline struct pdca_desc *txd_to_pdca_desc(
-+ struct dma_async_tx_descriptor *txd)
-+{
-+ return container_of(txd, struct pdca_desc, txd);
-+}
-+
-+static inline struct pdca_chan *dma_to_pdca_chan(struct dma_chan *chan)
-+{
-+ return container_of(chan, struct pdca_chan, chan);
-+}
-+
-+static inline struct pdca_dev *dma_to_pdca_dev(struct dma_device *dma)
-+{
-+ return container_of(dma, struct pdca_dev, dma);
-+}
-+
-+/* PDCA per-channel register definitions */
-+#define PDCA_MAR 0x0000 /* Memory Address */
-+#define PDCA_PSR 0x0004 /* Peripheral Select */
-+#define PDCA_TCR 0x0008 /* Transfer Counter */
-+#define PDCA_MARR 0x000c /* Memory Address Reload */
-+#define PDCA_TCRR 0x0010 /* Transfer Counter Reload */
-+#define PDCA_CR 0x0014 /* Control */
-+# define PDCA_CR_TEN ( 1 << 0) /* Transfer Enable */
-+# define PDCA_CR_TDIS ( 1 << 1) /* Transfer Disable */
-+# define PDCA_CR_ECLR ( 1 << 8) /* Error Clear */
-+#define PDCA_MR 0x0018 /* Mode */
-+# define PDCA_SIZE_BYTE ( 0 << 0) /* 8 bits per transfer */
-+# define PDCA_SIZE_HWORD ( 1 << 0) /* 16 bits per transfer */
-+# define PDCA_SIZE_WORD ( 2 << 0) /* 32 bits per transfer */
-+#define PDCA_SR 0x001c /* Status */
-+# define PDCA_SR_TEN ( 1 << 0) /* Transfer Enabled */
-+#define PDCA_IER 0x0020 /* Interrupt Enable */
-+#define PDCA_IDR 0x0024 /* Interrupt Disable */
-+#define PDCA_IMR 0x0028 /* Interrupt Mask */
-+#define PDCA_ISR 0x002c /* Interrupt Status */
-+# define PDCA_RCZ ( 1 << 0) /* Reload Counter Zero */
-+# define PDCA_TRC ( 1 << 1) /* Transfer Complete */
-+# define PDCA_TERR ( 1 << 2) /* Transfer Error */
-+
-+/* Address space occupied by one channel */
-+#define PDCA_CHAN_SIZE 0x40
-+
-+#define pdca_readl(base, reg) \
-+ __raw_readl((base) + PDCA_##reg)
-+#define pdca_writel(base, reg, value) \
-+ __raw_writel((value), (base) + PDCA_##reg)
-+
-+#endif /* __ATMEL_PDCA_H */
-diff -urN linux-2.6.28.2-0rig//include/linux/Kbuild linux-2.6.28.2/include/linux/Kbuild
---- linux-2.6.28.2-0rig//include/linux/Kbuild 2009-01-29 08:39:39.000000000 +0100
-+++ linux-2.6.28.2/include/linux/Kbuild 2009-01-29 08:52:50.000000000 +0100
-@@ -23,6 +23,7 @@
- header-y += atmarp.h
- header-y += atmbr2684.h
- header-y += atmclip.h
-+header-y += atmel_mpopfb.h
- header-y += atm_eni.h
- header-y += atm_he.h
- header-y += atm_idt77105.h
-diff -urN linux-2.6.28.2-0rig//include/linux/spi/atmel_spi.h linux-2.6.28.2/include/linux/spi/atmel_spi.h
---- linux-2.6.28.2-0rig//include/linux/spi/atmel_spi.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/include/linux/spi/atmel_spi.h 2009-01-29 08:52:50.000000000 +0100
-@@ -0,0 +1,20 @@
-+/*
-+ * Driver for Atmel AT32 and AT91 SPI Controllers
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __LINUX_SPI_ATMEL_SPI_H
-+#define __LINUX_SPI_ATMEL_SPI_H
-+
-+struct atmel_spi_pdata {
-+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
-+ struct dma_slave *rx_dma_slave;
-+ struct dma_slave *tx_dma_slave;
-+#endif
-+};
-+
-+#endif /* __LINUX_SPI_ATMEL_SPI_H */
-diff -urN linux-2.6.28.2-0rig//include/video/atmel_mpop.h linux-2.6.28.2/include/video/atmel_mpop.h
---- linux-2.6.28.2-0rig//include/video/atmel_mpop.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.28.2/include/video/atmel_mpop.h 2009-01-29 08:52:50.000000000 +0100
-@@ -0,0 +1,820 @@
-+/*
-+ * Header file for AT32 MPOP Controller
-+ *
-+ * Data structure and register user interface
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ATMEL_MPOP_H__
-+#define __ATMEL_MPOP_H__
-+
-+#include <linux/atmel_mpopfb.h>
-+
-+/* MPOP Controller info data structure */
-+struct atmel_mpopfb_info {
-+ spinlock_t lock;
-+ struct fb_info *info;
-+ void __iomem *mmio;
-+ unsigned long irq_base;
-+ void *slave_base;
-+
-+ struct platform_device *pdev;
-+ struct platform_device *lcdc_pdev;
-+ struct clk *mpop_hclk;
-+ struct clk *mpop_pclk;
-+ unsigned int running;
-+ unsigned int connected_to_lcdc;
-+ unsigned long lcdc_old_smem_start;
-+ unsigned long lcdc_old_bits_per_pixel;
-+ struct atmel_mpopfb_baseimg_info baseimg_info;
-+ struct atmel_mpopfb_overlay_info overlay_info[3];
-+ struct atmel_mpopfb_rgbconv_coeffs rgbconv_coeffs;
-+};
-+
-+/* TODO! Clean up these defines.... */
-+#define ATMEL_MPOP_B 0
-+#define ATMEL_MPOP_B1 0
-+#define ATMEL_MPOP_B1_MASK 0x00000fff
-+#define ATMEL_MPOP_B1_OFFSET 0
-+#define ATMEL_MPOP_B1_SIZE 12
-+#define ATMEL_MPOP_B2 12
-+#define ATMEL_MPOP_B2B1 0x00000024
-+#define ATMEL_MPOP_B2B1_B1 0
-+#define ATMEL_MPOP_B2B1_B1_MASK 0x00000fff
-+#define ATMEL_MPOP_B2B1_B1_OFFSET 0
-+#define ATMEL_MPOP_B2B1_B1_SIZE 12
-+#define ATMEL_MPOP_B2B1_B2 12
-+#define ATMEL_MPOP_B2B1_B2_MASK 0x00fff000
-+#define ATMEL_MPOP_B2B1_B2_OFFSET 12
-+#define ATMEL_MPOP_B2B1_B2_SIZE 12
-+#define ATMEL_MPOP_B2_MASK 0x00fff000
-+#define ATMEL_MPOP_B2_OFFSET 12
-+#define ATMEL_MPOP_B2_SIZE 12
-+#define ATMEL_MPOP_B3 0
-+#define ATMEL_MPOP_B3_MASK 0x00000fff
-+#define ATMEL_MPOP_B3_OFFSET 0
-+#define ATMEL_MPOP_B3_SIZE 12
-+#define ATMEL_MPOP_B4 12
-+#define ATMEL_MPOP_B4B3 0x00000028
-+#define ATMEL_MPOP_B4B3_B3 0
-+#define ATMEL_MPOP_B4B3_B3_MASK 0x00000fff
-+#define ATMEL_MPOP_B4B3_B3_OFFSET 0
-+#define ATMEL_MPOP_B4B3_B3_SIZE 12
-+#define ATMEL_MPOP_B4B3_B4 12
-+#define ATMEL_MPOP_B4B3_B4_MASK 0xfffff000
-+#define ATMEL_MPOP_B4B3_B4_OFFSET 12
-+#define ATMEL_MPOP_B4B3_B4_SIZE 20
-+#define ATMEL_MPOP_B4_MASK 0xfffff000
-+#define ATMEL_MPOP_B4_OFFSET 12
-+#define ATMEL_MPOP_B4_SIZE 20
-+#define ATMEL_MPOP_BGCOLOR 0x00000090
-+#define ATMEL_MPOP_BGCOLOR_BGCOLOR 0
-+#define ATMEL_MPOP_BGCOLOR_BGCOLOR_MASK 0xffffffff
-+#define ATMEL_MPOP_BGCOLOR_BGCOLOR_OFFSET 0
-+#define ATMEL_MPOP_BGCOLOR_BGCOLOR_SIZE 32
-+#define ATMEL_MPOP_BGCOLOR_MASK 0xffffffff
-+#define ATMEL_MPOP_BGCOLOR_OFFSET 0
-+#define ATMEL_MPOP_BGCOLOR_SIZE 32
-+#define ATMEL_MPOP_BGR 6
-+#define ATMEL_MPOP_BGR_MASK 0x00000040
-+#define ATMEL_MPOP_BGR_OFFSET 6
-+#define ATMEL_MPOP_BGR_SIZE 1
-+#define ATMEL_MPOP_B_MASK 0x000000ff
-+#define ATMEL_MPOP_B_OFFSET 0
-+#define ATMEL_MPOP_B_SIZE 8
-+#define ATMEL_MPOP_CACHEDIS 8
-+#define ATMEL_MPOP_CACHEDIS_MASK 0x00000100
-+#define ATMEL_MPOP_CACHEDIS_OFFSET 8
-+#define ATMEL_MPOP_CACHEDIS_SIZE 1
-+#define ATMEL_MPOP_CR 0x00000000
-+#define ATMEL_MPOP_CR_CACHEDIS 8
-+#define ATMEL_MPOP_CR_CACHEDIS_MASK 0x00000100
-+#define ATMEL_MPOP_CR_CACHEDIS_OFFSET 8
-+#define ATMEL_MPOP_CR_CACHEDIS_SIZE 1
-+#define ATMEL_MPOP_CR_EN 0
-+#define ATMEL_MPOP_CR_EN_MASK 0x00000001
-+#define ATMEL_MPOP_CR_EN_OFFSET 0
-+#define ATMEL_MPOP_CR_EN_SIZE 1
-+#define ATMEL_MPOP_CR_OUT_BGR 3
-+#define ATMEL_MPOP_CR_OUT_BGR_MASK 0x00000008
-+#define ATMEL_MPOP_CR_OUT_BGR_OFFSET 3
-+#define ATMEL_MPOP_CR_OUT_BGR_SIZE 1
-+#define ATMEL_MPOP_CR_OUT_CTRL 2
-+#define ATMEL_MPOP_CR_OUT_CTRL_MASK 0x00000004
-+#define ATMEL_MPOP_CR_OUT_CTRL_OFFSET 2
-+#define ATMEL_MPOP_CR_OUT_CTRL_SIZE 1
-+#define ATMEL_MPOP_CR_START 1
-+#define ATMEL_MPOP_CR_START_MASK 0x00000002
-+#define ATMEL_MPOP_CR_START_OFFSET 1
-+#define ATMEL_MPOP_CR_START_SIZE 1
-+#define ATMEL_MPOP_CURSOREN 0
-+#define ATMEL_MPOP_CURSOREN_MASK 0x00000001
-+#define ATMEL_MPOP_CURSOREN_OFFSET 0
-+#define ATMEL_MPOP_CURSOREN_SIZE 1
-+#define ATMEL_MPOP_CURSOR_P0 0x00000080
-+#define ATMEL_MPOP_CURSOR_P0_B 0
-+#define ATMEL_MPOP_CURSOR_P0_B_MASK 0x000000ff
-+#define ATMEL_MPOP_CURSOR_P0_B_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_P0_B_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P0_G 8
-+#define ATMEL_MPOP_CURSOR_P0_G_MASK 0x0000ff00
-+#define ATMEL_MPOP_CURSOR_P0_G_OFFSET 8
-+#define ATMEL_MPOP_CURSOR_P0_G_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P0_INVERT 25
-+#define ATMEL_MPOP_CURSOR_P0_INVERT_MASK 0x02000000
-+#define ATMEL_MPOP_CURSOR_P0_INVERT_OFFSET 25
-+#define ATMEL_MPOP_CURSOR_P0_INVERT_SIZE 1
-+#define ATMEL_MPOP_CURSOR_P0_R 16
-+#define ATMEL_MPOP_CURSOR_P0_R_MASK 0x00ff0000
-+#define ATMEL_MPOP_CURSOR_P0_R_OFFSET 16
-+#define ATMEL_MPOP_CURSOR_P0_R_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P0_VISIBLE 24
-+#define ATMEL_MPOP_CURSOR_P0_VISIBLE_MASK 0x01000000
-+#define ATMEL_MPOP_CURSOR_P0_VISIBLE_OFFSET 24
-+#define ATMEL_MPOP_CURSOR_P0_VISIBLE_SIZE 1
-+#define ATMEL_MPOP_CURSOR_P1 0x00000084
-+#define ATMEL_MPOP_CURSOR_P1_B 0
-+#define ATMEL_MPOP_CURSOR_P1_B_MASK 0x000000ff
-+#define ATMEL_MPOP_CURSOR_P1_B_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_P1_B_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P1_G 8
-+#define ATMEL_MPOP_CURSOR_P1_G_MASK 0x0000ff00
-+#define ATMEL_MPOP_CURSOR_P1_G_OFFSET 8
-+#define ATMEL_MPOP_CURSOR_P1_G_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P1_INVERT 25
-+#define ATMEL_MPOP_CURSOR_P1_INVERT_MASK 0x02000000
-+#define ATMEL_MPOP_CURSOR_P1_INVERT_OFFSET 25
-+#define ATMEL_MPOP_CURSOR_P1_INVERT_SIZE 1
-+#define ATMEL_MPOP_CURSOR_P1_R 16
-+#define ATMEL_MPOP_CURSOR_P1_R_MASK 0x00ff0000
-+#define ATMEL_MPOP_CURSOR_P1_R_OFFSET 16
-+#define ATMEL_MPOP_CURSOR_P1_R_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P1_VISIBLE 24
-+#define ATMEL_MPOP_CURSOR_P1_VISIBLE_MASK 0x01000000
-+#define ATMEL_MPOP_CURSOR_P1_VISIBLE_OFFSET 24
-+#define ATMEL_MPOP_CURSOR_P1_VISIBLE_SIZE 1
-+#define ATMEL_MPOP_CURSOR_P2 0x00000088
-+#define ATMEL_MPOP_CURSOR_P2_B 0
-+#define ATMEL_MPOP_CURSOR_P2_B_MASK 0x000000ff
-+#define ATMEL_MPOP_CURSOR_P2_B_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_P2_B_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P2_G 8
-+#define ATMEL_MPOP_CURSOR_P2_G_MASK 0x0000ff00
-+#define ATMEL_MPOP_CURSOR_P2_G_OFFSET 8
-+#define ATMEL_MPOP_CURSOR_P2_G_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P2_INVERT 25
-+#define ATMEL_MPOP_CURSOR_P2_INVERT_MASK 0x02000000
-+#define ATMEL_MPOP_CURSOR_P2_INVERT_OFFSET 25
-+#define ATMEL_MPOP_CURSOR_P2_INVERT_SIZE 1
-+#define ATMEL_MPOP_CURSOR_P2_R 16
-+#define ATMEL_MPOP_CURSOR_P2_R_MASK 0x00ff0000
-+#define ATMEL_MPOP_CURSOR_P2_R_OFFSET 16
-+#define ATMEL_MPOP_CURSOR_P2_R_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P2_VISIBLE 24
-+#define ATMEL_MPOP_CURSOR_P2_VISIBLE_MASK 0x01000000
-+#define ATMEL_MPOP_CURSOR_P2_VISIBLE_OFFSET 24
-+#define ATMEL_MPOP_CURSOR_P2_VISIBLE_SIZE 1
-+#define ATMEL_MPOP_CURSOR_P3 0x0000008c
-+#define ATMEL_MPOP_CURSOR_P3_B 0
-+#define ATMEL_MPOP_CURSOR_P3_B_MASK 0x000000ff
-+#define ATMEL_MPOP_CURSOR_P3_B_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_P3_B_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P3_G 8
-+#define ATMEL_MPOP_CURSOR_P3_G_MASK 0x0000ff00
-+#define ATMEL_MPOP_CURSOR_P3_G_OFFSET 8
-+#define ATMEL_MPOP_CURSOR_P3_G_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P3_INVERT 25
-+#define ATMEL_MPOP_CURSOR_P3_INVERT_MASK 0x02000000
-+#define ATMEL_MPOP_CURSOR_P3_INVERT_OFFSET 25
-+#define ATMEL_MPOP_CURSOR_P3_INVERT_SIZE 1
-+#define ATMEL_MPOP_CURSOR_P3_R 16
-+#define ATMEL_MPOP_CURSOR_P3_R_MASK 0x00ff0000
-+#define ATMEL_MPOP_CURSOR_P3_R_OFFSET 16
-+#define ATMEL_MPOP_CURSOR_P3_R_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P3_VISIBLE 24
-+#define ATMEL_MPOP_CURSOR_P3_VISIBLE_MASK 0x01000000
-+#define ATMEL_MPOP_CURSOR_P3_VISIBLE_OFFSET 24
-+#define ATMEL_MPOP_CURSOR_P3_VISIBLE_SIZE 1
-+#define ATMEL_MPOP_CURSOR_POS 0x00000058
-+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X 11
-+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X_MASK 0x003ff800
-+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X_OFFSET 11
-+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X_SIZE 11
-+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y 0
-+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y_SIZE 11
-+#define ATMEL_MPOP_CURSOR_POS_X 11
-+#define ATMEL_MPOP_CURSOR_POS_X_MASK 0x003ff800
-+#define ATMEL_MPOP_CURSOR_POS_X_OFFSET 11
-+#define ATMEL_MPOP_CURSOR_POS_X_SIZE 11
-+#define ATMEL_MPOP_CURSOR_POS_Y 0
-+#define ATMEL_MPOP_CURSOR_POS_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_CURSOR_POS_Y_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_POS_Y_SIZE 11
-+#define ATMEL_MPOP_CURSOR_SAR 0x00000048
-+#define ATMEL_MPOP_CURSOR_SAR_CURSOR_SAR 0
-+#define ATMEL_MPOP_CURSOR_SAR_CURSOR_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_CURSOR_SAR_CURSOR_SAR_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_SAR_CURSOR_SAR_SIZE 32
-+#define ATMEL_MPOP_CURSOR_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_CURSOR_SAR_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_SAR_SIZE 32
-+#define ATMEL_MPOP_CURSOR_SIZE 0x0000006c
-+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X 11
-+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X_MASK 0x003ff800
-+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X_OFFSET 11
-+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X_SIZE 11
-+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y 0
-+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y_SIZE 11
-+#define ATMEL_MPOP_CURSOR_SIZE_X 11
-+#define ATMEL_MPOP_CURSOR_SIZE_X_MASK 0x003ff800
-+#define ATMEL_MPOP_CURSOR_SIZE_X_OFFSET 11
-+#define ATMEL_MPOP_CURSOR_SIZE_X_SIZE 11
-+#define ATMEL_MPOP_CURSOR_SIZE_Y 0
-+#define ATMEL_MPOP_CURSOR_SIZE_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_CURSOR_SIZE_Y_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_SIZE_Y_SIZE 11
-+#define ATMEL_MPOP_CURSOR_WTC 0x0000007c
-+#define ATMEL_MPOP_CURSOR_WTC_CURSOR_WTC 0
-+#define ATMEL_MPOP_CURSOR_WTC_CURSOR_WTC_MASK 0xffffffff
-+#define ATMEL_MPOP_CURSOR_WTC_CURSOR_WTC_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_WTC_CURSOR_WTC_SIZE 32
-+#define ATMEL_MPOP_CURSOR_WTC_MASK 0xffffffff
-+#define ATMEL_MPOP_CURSOR_WTC_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_WTC_SIZE 32
-+#define ATMEL_MPOP_DISP_MAX_COORD 0x00000010
-+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_X 11
-+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_X_MASK 0x003ff800
-+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_X_OFFSET 11
-+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_X_SIZE 11
-+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_Y 0
-+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_Y_OFFSET 0
-+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_Y_SIZE 11
-+#define ATMEL_MPOP_DISP_MAX_COORD_X 11
-+#define ATMEL_MPOP_DISP_MAX_COORD_X_MASK 0x003ff800
-+#define ATMEL_MPOP_DISP_MAX_COORD_X_OFFSET 11
-+#define ATMEL_MPOP_DISP_MAX_COORD_X_SIZE 11
-+#define ATMEL_MPOP_DISP_MAX_COORD_Y 0
-+#define ATMEL_MPOP_DISP_MAX_COORD_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_DISP_MAX_COORD_Y_OFFSET 0
-+#define ATMEL_MPOP_DISP_MAX_COORD_Y_SIZE 11
-+#define ATMEL_MPOP_EN 0
-+#define ATMEL_MPOP_EN_MASK 0x00000001
-+#define ATMEL_MPOP_EN_OFFSET 0
-+#define ATMEL_MPOP_EN_SIZE 1
-+#define ATMEL_MPOP_EOP 3
-+#define ATMEL_MPOP_EOP_MASK 0x00000008
-+#define ATMEL_MPOP_EOP_OFFSET 3
-+#define ATMEL_MPOP_EOP_SIZE 1
-+#define ATMEL_MPOP_G 8
-+#define ATMEL_MPOP_G1 0
-+#define ATMEL_MPOP_G1_MASK 0x00000fff
-+#define ATMEL_MPOP_G1_OFFSET 0
-+#define ATMEL_MPOP_G1_SIZE 12
-+#define ATMEL_MPOP_G2 12
-+#define ATMEL_MPOP_G2G1 0x0000001c
-+#define ATMEL_MPOP_G2G1_G1 0
-+#define ATMEL_MPOP_G2G1_G1_MASK 0x00000fff
-+#define ATMEL_MPOP_G2G1_G1_OFFSET 0
-+#define ATMEL_MPOP_G2G1_G1_SIZE 12
-+#define ATMEL_MPOP_G2G1_G2 12
-+#define ATMEL_MPOP_G2G1_G2_MASK 0x00fff000
-+#define ATMEL_MPOP_G2G1_G2_OFFSET 12
-+#define ATMEL_MPOP_G2G1_G2_SIZE 12
-+#define ATMEL_MPOP_G2_MASK 0x00fff000
-+#define ATMEL_MPOP_G2_OFFSET 12
-+#define ATMEL_MPOP_G2_SIZE 12
-+#define ATMEL_MPOP_G3 0
-+#define ATMEL_MPOP_G3_MASK 0x00000fff
-+#define ATMEL_MPOP_G3_OFFSET 0
-+#define ATMEL_MPOP_G3_SIZE 12
-+#define ATMEL_MPOP_G4 12
-+#define ATMEL_MPOP_G4G3 0x00000020
-+#define ATMEL_MPOP_G4G3_G3 0
-+#define ATMEL_MPOP_G4G3_G3_MASK 0x00000fff
-+#define ATMEL_MPOP_G4G3_G3_OFFSET 0
-+#define ATMEL_MPOP_G4G3_G3_SIZE 12
-+#define ATMEL_MPOP_G4G3_G4 12
-+#define ATMEL_MPOP_G4G3_G4_MASK 0xfffff000
-+#define ATMEL_MPOP_G4G3_G4_OFFSET 12
-+#define ATMEL_MPOP_G4G3_G4_SIZE 20
-+#define ATMEL_MPOP_G4_MASK 0xfffff000
-+#define ATMEL_MPOP_G4_OFFSET 12
-+#define ATMEL_MPOP_G4_SIZE 20
-+#define ATMEL_MPOP_G_MASK 0x0000ff00
-+#define ATMEL_MPOP_G_OFFSET 8
-+#define ATMEL_MPOP_G_SIZE 8
-+#define ATMEL_MPOP_INTCLEAR 0x000000b0
-+#define ATMEL_MPOP_INTCLEAR_EOP 3
-+#define ATMEL_MPOP_INTCLEAR_EOP_MASK 0x00000008
-+#define ATMEL_MPOP_INTCLEAR_EOP_OFFSET 3
-+#define ATMEL_MPOP_INTCLEAR_EOP_SIZE 1
-+#define ATMEL_MPOP_INTCLEAR_OUT 2
-+#define ATMEL_MPOP_INTCLEAR_OUT_MASK 0x00000004
-+#define ATMEL_MPOP_INTCLEAR_OUT_OFFSET 2
-+#define ATMEL_MPOP_INTCLEAR_OUT_SIZE 1
-+#define ATMEL_MPOP_INTCLEAR_OVERLAY 1
-+#define ATMEL_MPOP_INTCLEAR_OVERLAY_MASK 0x00000002
-+#define ATMEL_MPOP_INTCLEAR_OVERLAY_OFFSET 1
-+#define ATMEL_MPOP_INTCLEAR_OVERLAY_SIZE 1
-+#define ATMEL_MPOP_INTCLEAR_SOP 4
-+#define ATMEL_MPOP_INTCLEAR_SOP_MASK 0x00000010
-+#define ATMEL_MPOP_INTCLEAR_SOP_OFFSET 4
-+#define ATMEL_MPOP_INTCLEAR_SOP_SIZE 1
-+#define ATMEL_MPOP_INTCLEAR_YUV 0
-+#define ATMEL_MPOP_INTCLEAR_YUV_MASK 0x00000001
-+#define ATMEL_MPOP_INTCLEAR_YUV_OFFSET 0
-+#define ATMEL_MPOP_INTCLEAR_YUV_SIZE 1
-+#define ATMEL_MPOP_INTDIS 0x000000a4
-+#define ATMEL_MPOP_INTDIS_EOP 3
-+#define ATMEL_MPOP_INTDIS_EOP_MASK 0x00000008
-+#define ATMEL_MPOP_INTDIS_EOP_OFFSET 3
-+#define ATMEL_MPOP_INTDIS_EOP_SIZE 1
-+#define ATMEL_MPOP_INTDIS_OUT 2
-+#define ATMEL_MPOP_INTDIS_OUT_MASK 0x00000004
-+#define ATMEL_MPOP_INTDIS_OUT_OFFSET 2
-+#define ATMEL_MPOP_INTDIS_OUT_SIZE 1
-+#define ATMEL_MPOP_INTDIS_OVERLAY 1
-+#define ATMEL_MPOP_INTDIS_OVERLAY_MASK 0x00000002
-+#define ATMEL_MPOP_INTDIS_OVERLAY_OFFSET 1
-+#define ATMEL_MPOP_INTDIS_OVERLAY_SIZE 1
-+#define ATMEL_MPOP_INTDIS_SOP 4
-+#define ATMEL_MPOP_INTDIS_SOP_MASK 0x00000010
-+#define ATMEL_MPOP_INTDIS_SOP_OFFSET 4
-+#define ATMEL_MPOP_INTDIS_SOP_SIZE 1
-+#define ATMEL_MPOP_INTDIS_YUV 0
-+#define ATMEL_MPOP_INTDIS_YUV_MASK 0x00000001
-+#define ATMEL_MPOP_INTDIS_YUV_OFFSET 0
-+#define ATMEL_MPOP_INTDIS_YUV_SIZE 1
-+#define ATMEL_MPOP_INTEN 0x000000a0
-+#define ATMEL_MPOP_INTEN_EOP 3
-+#define ATMEL_MPOP_INTEN_EOP_MASK 0x00000008
-+#define ATMEL_MPOP_INTEN_EOP_OFFSET 3
-+#define ATMEL_MPOP_INTEN_EOP_SIZE 1
-+#define ATMEL_MPOP_INTEN_OUT 2
-+#define ATMEL_MPOP_INTEN_OUT_MASK 0x00000004
-+#define ATMEL_MPOP_INTEN_OUT_OFFSET 2
-+#define ATMEL_MPOP_INTEN_OUT_SIZE 1
-+#define ATMEL_MPOP_INTEN_OVERLAY 1
-+#define ATMEL_MPOP_INTEN_OVERLAY_MASK 0x00000002
-+#define ATMEL_MPOP_INTEN_OVERLAY_OFFSET 1
-+#define ATMEL_MPOP_INTEN_OVERLAY_SIZE 1
-+#define ATMEL_MPOP_INTEN_SOP 4
-+#define ATMEL_MPOP_INTEN_SOP_MASK 0x00000010
-+#define ATMEL_MPOP_INTEN_SOP_OFFSET 4
-+#define ATMEL_MPOP_INTEN_SOP_SIZE 1
-+#define ATMEL_MPOP_INTEN_YUV 0
-+#define ATMEL_MPOP_INTEN_YUV_MASK 0x00000001
-+#define ATMEL_MPOP_INTEN_YUV_OFFSET 0
-+#define ATMEL_MPOP_INTEN_YUV_SIZE 1
-+#define ATMEL_MPOP_INTMASK 0x000000a8
-+#define ATMEL_MPOP_INTMASK_EOP 3
-+#define ATMEL_MPOP_INTMASK_EOP_MASK 0x00000008
-+#define ATMEL_MPOP_INTMASK_EOP_OFFSET 3
-+#define ATMEL_MPOP_INTMASK_EOP_SIZE 1
-+#define ATMEL_MPOP_INTMASK_OUT 2
-+#define ATMEL_MPOP_INTMASK_OUT_MASK 0x00000004
-+#define ATMEL_MPOP_INTMASK_OUT_OFFSET 2
-+#define ATMEL_MPOP_INTMASK_OUT_SIZE 1
-+#define ATMEL_MPOP_INTMASK_OVERLAY 1
-+#define ATMEL_MPOP_INTMASK_OVERLAY_MASK 0x00000002
-+#define ATMEL_MPOP_INTMASK_OVERLAY_OFFSET 1
-+#define ATMEL_MPOP_INTMASK_OVERLAY_SIZE 1
-+#define ATMEL_MPOP_INTMASK_SOP 4
-+#define ATMEL_MPOP_INTMASK_SOP_MASK 0x00000010
-+#define ATMEL_MPOP_INTMASK_SOP_OFFSET 4
-+#define ATMEL_MPOP_INTMASK_SOP_SIZE 1
-+#define ATMEL_MPOP_INTMASK_YUV 0
-+#define ATMEL_MPOP_INTMASK_YUV_MASK 0x00000001
-+#define ATMEL_MPOP_INTMASK_YUV_OFFSET 0
-+#define ATMEL_MPOP_INTMASK_YUV_SIZE 1
-+#define ATMEL_MPOP_INTSTATUS 0x000000ac
-+#define ATMEL_MPOP_INTSTATUS_EOP 3
-+#define ATMEL_MPOP_INTSTATUS_EOP_MASK 0x00000008
-+#define ATMEL_MPOP_INTSTATUS_EOP_OFFSET 3
-+#define ATMEL_MPOP_INTSTATUS_EOP_SIZE 1
-+#define ATMEL_MPOP_INTSTATUS_OUT 2
-+#define ATMEL_MPOP_INTSTATUS_OUT_MASK 0x00000004
-+#define ATMEL_MPOP_INTSTATUS_OUT_OFFSET 2
-+#define ATMEL_MPOP_INTSTATUS_OUT_SIZE 1
-+#define ATMEL_MPOP_INTSTATUS_OVERLAY 1
-+#define ATMEL_MPOP_INTSTATUS_OVERLAY_MASK 0x00000002
-+#define ATMEL_MPOP_INTSTATUS_OVERLAY_OFFSET 1
-+#define ATMEL_MPOP_INTSTATUS_OVERLAY_SIZE 1
-+#define ATMEL_MPOP_INTSTATUS_SOP 4
-+#define ATMEL_MPOP_INTSTATUS_SOP_MASK 0x00000010
-+#define ATMEL_MPOP_INTSTATUS_SOP_OFFSET 4
-+#define ATMEL_MPOP_INTSTATUS_SOP_SIZE 1
-+#define ATMEL_MPOP_INTSTATUS_YUV 0
-+#define ATMEL_MPOP_INTSTATUS_YUV_MASK 0x00000001
-+#define ATMEL_MPOP_INTSTATUS_YUV_OFFSET 0
-+#define ATMEL_MPOP_INTSTATUS_YUV_SIZE 1
-+#define ATMEL_MPOP_INVERT 25
-+#define ATMEL_MPOP_INVERT_MASK 0x02000000
-+#define ATMEL_MPOP_INVERT_OFFSET 25
-+#define ATMEL_MPOP_INVERT_SIZE 1
-+#define ATMEL_MPOP_MSTR_PTR 0x0000000c
-+#define ATMEL_MPOP_MSTR_PTR_MASK 0xffffffff
-+#define ATMEL_MPOP_MSTR_PTR_MSTR_PTR 0
-+#define ATMEL_MPOP_MSTR_PTR_MSTR_PTR_MASK 0xffffffff
-+#define ATMEL_MPOP_MSTR_PTR_MSTR_PTR_OFFSET 0
-+#define ATMEL_MPOP_MSTR_PTR_MSTR_PTR_SIZE 32
-+#define ATMEL_MPOP_MSTR_PTR_OFFSET 0
-+#define ATMEL_MPOP_MSTR_PTR_SIZE 32
-+#define ATMEL_MPOP_O1EN 1
-+#define ATMEL_MPOP_O1EN_MASK 0x00000002
-+#define ATMEL_MPOP_O1EN_OFFSET 1
-+#define ATMEL_MPOP_O1EN_SIZE 1
-+#define ATMEL_MPOP_O1_POS 0x00000050
-+#define ATMEL_MPOP_O1_POS_O1_POS_X 11
-+#define ATMEL_MPOP_O1_POS_O1_POS_X_MASK 0x003ff800
-+#define ATMEL_MPOP_O1_POS_O1_POS_X_OFFSET 11
-+#define ATMEL_MPOP_O1_POS_O1_POS_X_SIZE 11
-+#define ATMEL_MPOP_O1_POS_O1_POS_Y 0
-+#define ATMEL_MPOP_O1_POS_O1_POS_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_O1_POS_O1_POS_Y_OFFSET 0
-+#define ATMEL_MPOP_O1_POS_O1_POS_Y_SIZE 11
-+#define ATMEL_MPOP_O1_POS_X 11
-+#define ATMEL_MPOP_O1_POS_X_MASK 0x003ff800
-+#define ATMEL_MPOP_O1_POS_X_OFFSET 11
-+#define ATMEL_MPOP_O1_POS_X_SIZE 11
-+#define ATMEL_MPOP_O1_POS_Y 0
-+#define ATMEL_MPOP_O1_POS_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_O1_POS_Y_OFFSET 0
-+#define ATMEL_MPOP_O1_POS_Y_SIZE 11
-+#define ATMEL_MPOP_O1_SAR 0x00000040
-+#define ATMEL_MPOP_O1_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_O1_SAR_O1_SAR 0
-+#define ATMEL_MPOP_O1_SAR_O1_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_O1_SAR_O1_SAR_OFFSET 0
-+#define ATMEL_MPOP_O1_SAR_O1_SAR_SIZE 32
-+#define ATMEL_MPOP_O1_SAR_OFFSET 0
-+#define ATMEL_MPOP_O1_SAR_SIZE 32
-+#define ATMEL_MPOP_O1_SIZE 0x00000064
-+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_X 11
-+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_X_MASK 0x003ff800
-+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_X_OFFSET 11
-+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_X_SIZE 11
-+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_Y 0
-+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_Y_OFFSET 0
-+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_Y_SIZE 11
-+#define ATMEL_MPOP_O1_SIZE_X 11
-+#define ATMEL_MPOP_O1_SIZE_X_MASK 0x003ff800
-+#define ATMEL_MPOP_O1_SIZE_X_OFFSET 11
-+#define ATMEL_MPOP_O1_SIZE_X_SIZE 11
-+#define ATMEL_MPOP_O1_SIZE_Y 0
-+#define ATMEL_MPOP_O1_SIZE_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_O1_SIZE_Y_OFFSET 0
-+#define ATMEL_MPOP_O1_SIZE_Y_SIZE 11
-+#define ATMEL_MPOP_O1_WTC 0x00000074
-+#define ATMEL_MPOP_O1_WTC_MASK 0xffffffff
-+#define ATMEL_MPOP_O1_WTC_O1_WTC 0
-+#define ATMEL_MPOP_O1_WTC_O1_WTC_MASK 0xffffffff
-+#define ATMEL_MPOP_O1_WTC_O1_WTC_OFFSET 0
-+#define ATMEL_MPOP_O1_WTC_O1_WTC_SIZE 32
-+#define ATMEL_MPOP_O1_WTC_OFFSET 0
-+#define ATMEL_MPOP_O1_WTC_SIZE 32
-+#define ATMEL_MPOP_O2EN 2
-+#define ATMEL_MPOP_O2EN_MASK 0x00000004
-+#define ATMEL_MPOP_O2EN_OFFSET 2
-+#define ATMEL_MPOP_O2EN_SIZE 1
-+#define ATMEL_MPOP_O2_POS 0x00000054
-+#define ATMEL_MPOP_O2_POS_O2_POS_X 11
-+#define ATMEL_MPOP_O2_POS_O2_POS_X_MASK 0x003ff800
-+#define ATMEL_MPOP_O2_POS_O2_POS_X_OFFSET 11
-+#define ATMEL_MPOP_O2_POS_O2_POS_X_SIZE 11
-+#define ATMEL_MPOP_O2_POS_O2_POS_Y 0
-+#define ATMEL_MPOP_O2_POS_O2_POS_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_O2_POS_O2_POS_Y_OFFSET 0
-+#define ATMEL_MPOP_O2_POS_O2_POS_Y_SIZE 11
-+#define ATMEL_MPOP_O2_POS_X 11
-+#define ATMEL_MPOP_O2_POS_X_MASK 0x003ff800
-+#define ATMEL_MPOP_O2_POS_X_OFFSET 11
-+#define ATMEL_MPOP_O2_POS_X_SIZE 11
-+#define ATMEL_MPOP_O2_POS_Y 0
-+#define ATMEL_MPOP_O2_POS_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_O2_POS_Y_OFFSET 0
-+#define ATMEL_MPOP_O2_POS_Y_SIZE 11
-+#define ATMEL_MPOP_O2_SAR 0x00000044
-+#define ATMEL_MPOP_O2_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_O2_SAR_O2_SAR 0
-+#define ATMEL_MPOP_O2_SAR_O2_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_O2_SAR_O2_SAR_OFFSET 0
-+#define ATMEL_MPOP_O2_SAR_O2_SAR_SIZE 32
-+#define ATMEL_MPOP_O2_SAR_OFFSET 0
-+#define ATMEL_MPOP_O2_SAR_SIZE 32
-+#define ATMEL_MPOP_O2_SIZE 0x00000068
-+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_X 11
-+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_X_MASK 0x003ff800
-+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_X_OFFSET 11
-+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_X_SIZE 11
-+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_Y 0
-+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_Y_OFFSET 0
-+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_Y_SIZE 11
-+#define ATMEL_MPOP_O2_SIZE_X 11
-+#define ATMEL_MPOP_O2_SIZE_X_MASK 0x003ff800
-+#define ATMEL_MPOP_O2_SIZE_X_OFFSET 11
-+#define ATMEL_MPOP_O2_SIZE_X_SIZE 11
-+#define ATMEL_MPOP_O2_SIZE_Y 0
-+#define ATMEL_MPOP_O2_SIZE_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_O2_SIZE_Y_OFFSET 0
-+#define ATMEL_MPOP_O2_SIZE_Y_SIZE 11
-+#define ATMEL_MPOP_O2_WTC 0x00000078
-+#define ATMEL_MPOP_O2_WTC_MASK 0xffffffff
-+#define ATMEL_MPOP_O2_WTC_O2_WTC 0
-+#define ATMEL_MPOP_O2_WTC_O2_WTC_MASK 0xffffffff
-+#define ATMEL_MPOP_O2_WTC_O2_WTC_OFFSET 0
-+#define ATMEL_MPOP_O2_WTC_O2_WTC_SIZE 32
-+#define ATMEL_MPOP_O2_WTC_OFFSET 0
-+#define ATMEL_MPOP_O2_WTC_SIZE 32
-+#define ATMEL_MPOP_OCR 0x00000008
-+#define ATMEL_MPOP_OCR_BGR 6
-+#define ATMEL_MPOP_OCR_BGR_MASK 0x00000040
-+#define ATMEL_MPOP_OCR_BGR_OFFSET 6
-+#define ATMEL_MPOP_OCR_BGR_SIZE 1
-+#define ATMEL_MPOP_OCR_CURSOREN 0
-+#define ATMEL_MPOP_OCR_CURSOREN_MASK 0x00000001
-+#define ATMEL_MPOP_OCR_CURSOREN_OFFSET 0
-+#define ATMEL_MPOP_OCR_CURSOREN_SIZE 1
-+#define ATMEL_MPOP_OCR_O1EN 1
-+#define ATMEL_MPOP_OCR_O1EN_MASK 0x00000002
-+#define ATMEL_MPOP_OCR_O1EN_OFFSET 1
-+#define ATMEL_MPOP_OCR_O1EN_SIZE 1
-+#define ATMEL_MPOP_OCR_O2EN 2
-+#define ATMEL_MPOP_OCR_O2EN_MASK 0x00000004
-+#define ATMEL_MPOP_OCR_O2EN_OFFSET 2
-+#define ATMEL_MPOP_OCR_O2EN_SIZE 1
-+#define ATMEL_MPOP_OCR_RGBEN 3
-+#define ATMEL_MPOP_OCR_RGBEN_MASK 0x00000008
-+#define ATMEL_MPOP_OCR_RGBEN_OFFSET 3
-+#define ATMEL_MPOP_OCR_RGBEN_SIZE 1
-+#define ATMEL_MPOP_OCR_RGBFORM 5
-+#define ATMEL_MPOP_OCR_RGBFORM_MASK 0x00000020
-+#define ATMEL_MPOP_OCR_RGBFORM_OFFSET 5
-+#define ATMEL_MPOP_OCR_RGBFORM_SIZE 1
-+#define ATMEL_MPOP_OCR_RGBSRC 4
-+#define ATMEL_MPOP_OCR_RGBSRC_MASK 0x00000010
-+#define ATMEL_MPOP_OCR_RGBSRC_OFFSET 4
-+#define ATMEL_MPOP_OCR_RGBSRC_SIZE 1
-+#define ATMEL_MPOP_OUT 2
-+#define ATMEL_MPOP_OUT_BEAR 0x0000009c
-+#define ATMEL_MPOP_OUT_BEAR_MASK 0xffffffff
-+#define ATMEL_MPOP_OUT_BEAR_OFFSET 0
-+#define ATMEL_MPOP_OUT_BEAR_OUT_BEAR 0
-+#define ATMEL_MPOP_OUT_BEAR_OUT_BEAR_MASK 0xffffffff
-+#define ATMEL_MPOP_OUT_BEAR_OUT_BEAR_OFFSET 0
-+#define ATMEL_MPOP_OUT_BEAR_OUT_BEAR_SIZE 32
-+#define ATMEL_MPOP_OUT_BEAR_SIZE 32
-+#define ATMEL_MPOP_OUT_BGR 3
-+#define ATMEL_MPOP_OUT_BGR_MASK 0x00000008
-+#define ATMEL_MPOP_OUT_BGR_OFFSET 3
-+#define ATMEL_MPOP_OUT_BGR_SIZE 1
-+#define ATMEL_MPOP_OUT_CTRL 2
-+#define ATMEL_MPOP_OUT_CTRL_MASK 0x00000004
-+#define ATMEL_MPOP_OUT_CTRL_OFFSET 2
-+#define ATMEL_MPOP_OUT_CTRL_SIZE 1
-+#define ATMEL_MPOP_OUT_MASK 0x00000004
-+#define ATMEL_MPOP_OUT_OFFSET 2
-+#define ATMEL_MPOP_OUT_SIZE 1
-+#define ATMEL_MPOP_OVERLAY 1
-+#define ATMEL_MPOP_OVERLAY_BEAR 0x00000098
-+#define ATMEL_MPOP_OVERLAY_BEAR_MASK 0xffffffff
-+#define ATMEL_MPOP_OVERLAY_BEAR_OFFSET 0
-+#define ATMEL_MPOP_OVERLAY_BEAR_OVERLAY_BEAR 0
-+#define ATMEL_MPOP_OVERLAY_BEAR_OVERLAY_BEAR_MASK 0xffffffff
-+#define ATMEL_MPOP_OVERLAY_BEAR_OVERLAY_BEAR_OFFSET 0
-+#define ATMEL_MPOP_OVERLAY_BEAR_OVERLAY_BEAR_SIZE 32
-+#define ATMEL_MPOP_OVERLAY_BEAR_SIZE 32
-+#define ATMEL_MPOP_OVERLAY_MASK 0x00000002
-+#define ATMEL_MPOP_OVERLAY_OFFSET 1
-+#define ATMEL_MPOP_OVERLAY_SIZE 1
-+#define ATMEL_MPOP_PALETTEDATA 0x00000400
-+#define ATMEL_MPOP_R 16
-+#define ATMEL_MPOP_R1 0
-+#define ATMEL_MPOP_R1_MASK 0x00000fff
-+#define ATMEL_MPOP_R1_OFFSET 0
-+#define ATMEL_MPOP_R1_SIZE 12
-+#define ATMEL_MPOP_R2 12
-+#define ATMEL_MPOP_R2R1 0x00000014
-+#define ATMEL_MPOP_R2R1_R1 0
-+#define ATMEL_MPOP_R2R1_R1_MASK 0x00000fff
-+#define ATMEL_MPOP_R2R1_R1_OFFSET 0
-+#define ATMEL_MPOP_R2R1_R1_SIZE 12
-+#define ATMEL_MPOP_R2R1_R2 12
-+#define ATMEL_MPOP_R2R1_R2_MASK 0x00fff000
-+#define ATMEL_MPOP_R2R1_R2_OFFSET 12
-+#define ATMEL_MPOP_R2R1_R2_SIZE 12
-+#define ATMEL_MPOP_R2_MASK 0x00fff000
-+#define ATMEL_MPOP_R2_OFFSET 12
-+#define ATMEL_MPOP_R2_SIZE 12
-+#define ATMEL_MPOP_R3 0
-+#define ATMEL_MPOP_R3_MASK 0x00000fff
-+#define ATMEL_MPOP_R3_OFFSET 0
-+#define ATMEL_MPOP_R3_SIZE 12
-+#define ATMEL_MPOP_R4 12
-+#define ATMEL_MPOP_R4R3 0x00000018
-+#define ATMEL_MPOP_R4R3_R3 0
-+#define ATMEL_MPOP_R4R3_R3_MASK 0x00000fff
-+#define ATMEL_MPOP_R4R3_R3_OFFSET 0
-+#define ATMEL_MPOP_R4R3_R3_SIZE 12
-+#define ATMEL_MPOP_R4R3_R4 12
-+#define ATMEL_MPOP_R4R3_R4_MASK 0xfffff000
-+#define ATMEL_MPOP_R4R3_R4_OFFSET 12
-+#define ATMEL_MPOP_R4R3_R4_SIZE 20
-+#define ATMEL_MPOP_R4_MASK 0xfffff000
-+#define ATMEL_MPOP_R4_OFFSET 12
-+#define ATMEL_MPOP_R4_SIZE 20
-+#define ATMEL_MPOP_RGBEN 3
-+#define ATMEL_MPOP_RGBEN_MASK 0x00000008
-+#define ATMEL_MPOP_RGBEN_OFFSET 3
-+#define ATMEL_MPOP_RGBEN_SIZE 1
-+#define ATMEL_MPOP_RGBFORM 5
-+#define ATMEL_MPOP_RGBFORM_MASK 0x00000020
-+#define ATMEL_MPOP_RGBFORM_OFFSET 5
-+#define ATMEL_MPOP_RGBFORM_SIZE 1
-+#define ATMEL_MPOP_RGBSRC 4
-+#define ATMEL_MPOP_RGBSRC_MASK 0x00000010
-+#define ATMEL_MPOP_RGBSRC_OFFSET 4
-+#define ATMEL_MPOP_RGBSRC_SIZE 1
-+#define ATMEL_MPOP_RGB_POS 0x0000004c
-+#define ATMEL_MPOP_RGB_POS_RGB_POS_X 11
-+#define ATMEL_MPOP_RGB_POS_RGB_POS_X_MASK 0x003ff800
-+#define ATMEL_MPOP_RGB_POS_RGB_POS_X_OFFSET 11
-+#define ATMEL_MPOP_RGB_POS_RGB_POS_X_SIZE 11
-+#define ATMEL_MPOP_RGB_POS_RGB_POS_Y 0
-+#define ATMEL_MPOP_RGB_POS_RGB_POS_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_RGB_POS_RGB_POS_Y_OFFSET 0
-+#define ATMEL_MPOP_RGB_POS_RGB_POS_Y_SIZE 11
-+#define ATMEL_MPOP_RGB_POS_X 11
-+#define ATMEL_MPOP_RGB_POS_X_MASK 0x003ff800
-+#define ATMEL_MPOP_RGB_POS_X_OFFSET 11
-+#define ATMEL_MPOP_RGB_POS_X_SIZE 11
-+#define ATMEL_MPOP_RGB_POS_Y 0
-+#define ATMEL_MPOP_RGB_POS_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_RGB_POS_Y_OFFSET 0
-+#define ATMEL_MPOP_RGB_POS_Y_SIZE 11
-+#define ATMEL_MPOP_RGB_SAR 0x0000003c
-+#define ATMEL_MPOP_RGB_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_RGB_SAR_OFFSET 0
-+#define ATMEL_MPOP_RGB_SAR_RGB_SAR 0
-+#define ATMEL_MPOP_RGB_SAR_RGB_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_RGB_SAR_RGB_SAR_OFFSET 0
-+#define ATMEL_MPOP_RGB_SAR_RGB_SAR_SIZE 32
-+#define ATMEL_MPOP_RGB_SAR_SIZE 32
-+#define ATMEL_MPOP_RGB_SIZE 0x00000060
-+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_X 11
-+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_X_MASK 0x003ff800
-+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_X_OFFSET 11
-+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_X_SIZE 11
-+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_Y 0
-+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_Y_OFFSET 0
-+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_Y_SIZE 11
-+#define ATMEL_MPOP_RGB_SIZE_X 11
-+#define ATMEL_MPOP_RGB_SIZE_X_MASK 0x003ff800
-+#define ATMEL_MPOP_RGB_SIZE_X_OFFSET 11
-+#define ATMEL_MPOP_RGB_SIZE_X_SIZE 11
-+#define ATMEL_MPOP_RGB_SIZE_Y 0
-+#define ATMEL_MPOP_RGB_SIZE_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_RGB_SIZE_Y_OFFSET 0
-+#define ATMEL_MPOP_RGB_SIZE_Y_SIZE 11
-+#define ATMEL_MPOP_RGB_WTC 0x00000070
-+#define ATMEL_MPOP_RGB_WTC_MASK 0xffffffff
-+#define ATMEL_MPOP_RGB_WTC_OFFSET 0
-+#define ATMEL_MPOP_RGB_WTC_RGB_WTC 0
-+#define ATMEL_MPOP_RGB_WTC_RGB_WTC_MASK 0xffffffff
-+#define ATMEL_MPOP_RGB_WTC_RGB_WTC_OFFSET 0
-+#define ATMEL_MPOP_RGB_WTC_RGB_WTC_SIZE 32
-+#define ATMEL_MPOP_RGB_WTC_SIZE 32
-+#define ATMEL_MPOP_R_MASK 0x00ff0000
-+#define ATMEL_MPOP_R_OFFSET 16
-+#define ATMEL_MPOP_R_SIZE 8
-+#define ATMEL_MPOP_SOP 4
-+#define ATMEL_MPOP_SOP_MASK 0x00000010
-+#define ATMEL_MPOP_SOP_OFFSET 4
-+#define ATMEL_MPOP_SOP_SIZE 1
-+#define ATMEL_MPOP_START 1
-+#define ATMEL_MPOP_START_MASK 0x00000002
-+#define ATMEL_MPOP_START_OFFSET 1
-+#define ATMEL_MPOP_START_SIZE 1
-+#define ATMEL_MPOP_STRIDE 0x0000002c
-+#define ATMEL_MPOP_STRIDE_MASK 0xffffffff
-+#define ATMEL_MPOP_STRIDE_OFFSET 0
-+#define ATMEL_MPOP_STRIDE_SIZE 32
-+#define ATMEL_MPOP_STRIDE_STRIDE 0
-+#define ATMEL_MPOP_STRIDE_STRIDE_MASK 0xffffffff
-+#define ATMEL_MPOP_STRIDE_STRIDE_OFFSET 0
-+#define ATMEL_MPOP_STRIDE_STRIDE_SIZE 32
-+#define ATMEL_MPOP_U_SAR 0x00000034
-+#define ATMEL_MPOP_U_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_U_SAR_OFFSET 0
-+#define ATMEL_MPOP_U_SAR_SIZE 32
-+#define ATMEL_MPOP_U_SAR_U_SAR 0
-+#define ATMEL_MPOP_U_SAR_U_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_U_SAR_U_SAR_OFFSET 0
-+#define ATMEL_MPOP_U_SAR_U_SAR_SIZE 32
-+#define ATMEL_MPOP_VISIBLE 24
-+#define ATMEL_MPOP_VISIBLE_MASK 0x01000000
-+#define ATMEL_MPOP_VISIBLE_OFFSET 24
-+#define ATMEL_MPOP_VISIBLE_SIZE 1
-+#define ATMEL_MPOP_V_SAR 0x00000038
-+#define ATMEL_MPOP_V_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_V_SAR_OFFSET 0
-+#define ATMEL_MPOP_V_SAR_SIZE 32
-+#define ATMEL_MPOP_V_SAR_V_SAR 0
-+#define ATMEL_MPOP_V_SAR_V_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_V_SAR_V_SAR_OFFSET 0
-+#define ATMEL_MPOP_V_SAR_V_SAR_SIZE 32
-+#define ATMEL_MPOP_XRESIZE 16
-+#define ATMEL_MPOP_XRESIZE_MASK 0x00ff0000
-+#define ATMEL_MPOP_XRESIZE_OFFSET 16
-+#define ATMEL_MPOP_XRESIZE_SIZE 8
-+#define ATMEL_MPOP_YCR 0x00000004
-+#define ATMEL_MPOP_YCR_XRESIZE 16
-+#define ATMEL_MPOP_YCR_XRESIZE_MASK 0x00ff0000
-+#define ATMEL_MPOP_YCR_XRESIZE_OFFSET 16
-+#define ATMEL_MPOP_YCR_XRESIZE_SIZE 8
-+#define ATMEL_MPOP_YCR_YRESIZE 8
-+#define ATMEL_MPOP_YCR_YRESIZE_MASK 0x0000ff00
-+#define ATMEL_MPOP_YCR_YRESIZE_OFFSET 8
-+#define ATMEL_MPOP_YCR_YRESIZE_SIZE 8
-+#define ATMEL_MPOP_YCR_YUVFORMAT 0
-+#define ATMEL_MPOP_YCR_YUVFORMAT_MASK 0x00000003
-+#define ATMEL_MPOP_YCR_YUVFORMAT_OFFSET 0
-+#define ATMEL_MPOP_YCR_YUVFORMAT_SIZE 2
-+#define ATMEL_MPOP_YCR_YUVFORMAT_YUVFORMAT_420 0x00000002
-+#define ATMEL_MPOP_YCR_YUVFORMAT_YUVFORMAT_422 0x00000001
-+#define ATMEL_MPOP_YCR_YUVFORMAT_YUVFORMAT_444 0x00000000
-+#define ATMEL_MPOP_YRESIZE 8
-+#define ATMEL_MPOP_YRESIZE_MASK 0x0000ff00
-+#define ATMEL_MPOP_YRESIZE_OFFSET 8
-+#define ATMEL_MPOP_YRESIZE_SIZE 8
-+#define ATMEL_MPOP_YUV 0
-+#define ATMEL_MPOP_YUVFORMAT 0
-+#define ATMEL_MPOP_YUVFORMAT_420 0x00000002
-+#define ATMEL_MPOP_YUVFORMAT_422 0x00000001
-+#define ATMEL_MPOP_YUVFORMAT_444 0x00000000
-+#define ATMEL_MPOP_YUVFORMAT_MASK 0x00000003
-+#define ATMEL_MPOP_YUVFORMAT_OFFSET 0
-+#define ATMEL_MPOP_YUVFORMAT_SIZE 2
-+#define ATMEL_MPOP_YUVFORMAT_YUVFORMAT_420 0x00000002
-+#define ATMEL_MPOP_YUVFORMAT_YUVFORMAT_422 0x00000001
-+#define ATMEL_MPOP_YUVFORMAT_YUVFORMAT_444 0x00000000
-+#define ATMEL_MPOP_YUV_BEAR 0x00000094
-+#define ATMEL_MPOP_YUV_BEAR_MASK 0xffffffff
-+#define ATMEL_MPOP_YUV_BEAR_OFFSET 0
-+#define ATMEL_MPOP_YUV_BEAR_SIZE 32
-+#define ATMEL_MPOP_YUV_BEAR_YUV_BEAR 0
-+#define ATMEL_MPOP_YUV_BEAR_YUV_BEAR_MASK 0xffffffff
-+#define ATMEL_MPOP_YUV_BEAR_YUV_BEAR_OFFSET 0
-+#define ATMEL_MPOP_YUV_BEAR_YUV_BEAR_SIZE 32
-+#define ATMEL_MPOP_YUV_MASK 0x00000001
-+#define ATMEL_MPOP_YUV_MAX_COORD 0x0000005c
-+#define ATMEL_MPOP_YUV_MAX_COORD_X 11
-+#define ATMEL_MPOP_YUV_MAX_COORD_X_MASK 0x003ff800
-+#define ATMEL_MPOP_YUV_MAX_COORD_X_OFFSET 11
-+#define ATMEL_MPOP_YUV_MAX_COORD_X_SIZE 11
-+#define ATMEL_MPOP_YUV_MAX_COORD_Y 0
-+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_X 11
-+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_X_MASK 0x003ff800
-+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_X_OFFSET 11
-+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_X_SIZE 11
-+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_Y 0
-+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_Y_OFFSET 0
-+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_Y_SIZE 11
-+#define ATMEL_MPOP_YUV_MAX_COORD_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_YUV_MAX_COORD_Y_OFFSET 0
-+#define ATMEL_MPOP_YUV_MAX_COORD_Y_SIZE 11
-+#define ATMEL_MPOP_YUV_OFFSET 0
-+#define ATMEL_MPOP_YUV_SIZE 1
-+#define ATMEL_MPOP_Y_SAR 0x00000030
-+#define ATMEL_MPOP_Y_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_Y_SAR_OFFSET 0
-+#define ATMEL_MPOP_Y_SAR_SIZE 32
-+#define ATMEL_MPOP_Y_SAR_Y_SAR 0
-+#define ATMEL_MPOP_Y_SAR_Y_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_Y_SAR_Y_SAR_OFFSET 0
-+#define ATMEL_MPOP_Y_SAR_Y_SAR_SIZE 32
-+
-+#endif /* __ATMEL_MPOP_H__ */
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/clock.c linux-2.6.28.2/arch/avr32/mach-at32ap/clock.c
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/clock.c 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/clock.c 2009-01-29 10:16:11.000000000 +0100
-@@ -178,7 +178,11 @@
- #include <linux/io.h>
- #include <linux/debugfs.h>
- #include <linux/seq_file.h>
--#include "pm.h"
-+#if defined(CONFIG_CPU_AT32AP700X)
-+# include "pm-v1.h"
-+#elif defined(CONFIG_CPU_AT32AP720X)
-+# include "pm-v3.h"
-+#endif
-
-
- #define NEST_DELTA 2
-@@ -234,19 +238,40 @@
- struct clk *clk;
-
- /* show all the power manager registers */
-- seq_printf(s, "MCCTRL = %8x\n", pm_readl(MCCTRL));
-- seq_printf(s, "CKSEL = %8x\n", pm_readl(CKSEL));
-- seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPU_MASK));
-- seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSB_MASK));
-- seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBA_MASK));
-- seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBB_MASK));
-- seq_printf(s, "PLL0 = %8x\n", pm_readl(PLL0));
-- seq_printf(s, "PLL1 = %8x\n", pm_readl(PLL1));
-- seq_printf(s, "IMR = %8x\n", pm_readl(IMR));
-+ seq_printf(s, "MCCTRL = %8x\n", pm_readl(MCCTRL));
-+ seq_printf(s, "CKSEL = %8x\n", pm_readl(CKSEL));
-+#ifdef CONFIG_CPU_AT32AP700X
-+ seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPU_MASK));
-+ seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSB_MASK));
-+ seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBA_MASK));
-+ seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBB_MASK));
-+ seq_printf(s, "PLL0 = %8x\n", pm_readl(PLL0));
-+ seq_printf(s, "PLL1 = %8x\n", pm_readl(PLL1));
-+#else
-+ seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPUMASK));
-+ seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSBMASK));
-+ seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBAMASK));
-+ seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBBMASK));
-+ seq_printf(s, "PBADIVMASK = %8x\n", pm_readl(PBADIVMASK));
-+ seq_printf(s, "PBBDIVMASK = %8x\n", pm_readl(PBBDIVMASK));
-+ seq_printf(s, "PLL0 = %8x\n", pm_readl(PLL[0]));
-+ seq_printf(s, "PLL1 = %8x\n", pm_readl(PLL[1]));
-+ seq_printf(s, "PLL2 = %8x\n", pm_readl(PLL[2]));
-+ seq_printf(s, "OSCCTRL0 = %8x\n", pm_readl(OSCCTRL[0]));
-+ seq_printf(s, "OSCCTRL1 = %8x\n", pm_readl(OSCCTRL[1]));
-+ seq_printf(s, "OSCCTRL2 = %8x\n", pm_readl(OSCCTRL[2]));
-+ seq_printf(s, "POSCSR = %8x\n", pm_readl(POSCSR));
-+ seq_printf(s, "PPCR = %8x\n", pm_readl(PPCR));
-+#endif
-+ seq_printf(s, "IMR = %8x\n", pm_readl(IMR));
- for (i = 0; i < 8; i++) {
- if (i == 5)
- continue;
-- seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL(i)));
-+#ifdef CONFIG_CPU_AT32AP700X
-+ seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL(i)));
-+#else
-+ seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL[i]));
-+#endif
- }
-
- seq_printf(s, "\n");
-@@ -269,6 +294,16 @@
- dump_clock(clk, &r);
- clk_put(clk);
-
-+#ifdef CONFIG_CPU_AT32AP720X
-+ clk = clk_get(NULL, "osc2");
-+ dump_clock(clk, &r);
-+ clk_put(clk);
-+
-+ clk = clk_get(NULL, "rcosc");
-+ dump_clock(clk, &r);
-+ clk_put(clk);
-+#endif
-+
- spin_unlock(&clk_list_lock);
-
- return 0;
-
diff --git a/target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-201-avr32-atmel_mpopfb-disable-debug.patch b/target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-201-avr32-atmel_mpopfb-disable-debug.patch
deleted file mode 100644
index 6cc4b679a..000000000
--- a/target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-201-avr32-atmel_mpopfb-disable-debug.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From f26e2224d46430ac4f6c0ddeb518f5766ba62b16 Mon Sep 17 00:00:00 2001
-From: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-Date: Wed, 26 Nov 2008 14:10:45 +0100
-Subject: [PATCH 2/3] atmel_mpopfb: remove define DEBUG to disable debug output
-
-Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-
-diff --git a/drivers/video/atmel_mpopfb.c b/drivers/video/atmel_mpopfb.c
-index 0a07f7b..3b4b668 100644
---- a/drivers/video/atmel_mpopfb.c
-+++ b/drivers/video/atmel_mpopfb.c
-@@ -8,8 +8,6 @@
- * more details.
- */
-
--#define DEBUG
--
- #include <linux/clk.h>
- #include <linux/delay.h>
- #include <linux/dma-mapping.h>
---
-1.5.6.3
-
diff --git a/target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-202-avr32-atmel_mpopfb-add-signal-to-disable-line-caching.patch b/target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-202-avr32-atmel_mpopfb-add-signal-to-disable-line-caching.patch
deleted file mode 100644
index 2163c92c7..000000000
--- a/target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-202-avr32-atmel_mpopfb-add-signal-to-disable-line-caching.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-diff -urN linux-2.6.28.2-0rig//drivers/video/atmel_mpopfb.c linux-2.6.28.2/drivers/video/atmel_mpopfb.c
---- linux-2.6.28.2-0rig//drivers/video/atmel_mpopfb.c 2009-01-29 09:41:04.000000000 +0100
-+++ linux-2.6.28.2/drivers/video/atmel_mpopfb.c 2009-01-29 09:43:46.000000000 +0100
-@@ -315,6 +315,10 @@
- static void atmel_mpopfb_start(struct atmel_mpopfb_info *sinfo)
- {
- if (!sinfo->running) {
-+ unsigned int line_cache_disable =
-+ sinfo->baseimg_info.line_cache_disable ?
-+ ATMEL_MPOP_CR_CACHEDIS_MASK : 0;
-+
- dev_dbg(sinfo->info->device, " * Starting MPOP.\n");
-
- /* Enable all error interrupts. */
-@@ -325,9 +329,9 @@
- * reading from the slave interface it will start
- * generating a frame.
- */
-- mpop_writel(sinfo, ATMEL_MPOP_CR,
-- ATMEL_MPOP_CR_EN_MASK
-- /*| ATMEL_MPOP_CR_OUT_BGR_MASK */ );
-+ mpop_writel(sinfo, ATMEL_MPOP_CR, ATMEL_MPOP_CR_EN_MASK
-+ | line_cache_disable
-+ | ATMEL_MPOP_CR_OUT_BGR_MASK);
-
- sinfo->running = 1;
- }
-diff -urN linux-2.6.28.2-0rig//include/linux/atmel_mpopfb.h linux-2.6.28.2/include/linux/atmel_mpopfb.h
---- linux-2.6.28.2-0rig//include/linux/atmel_mpopfb.h 2009-01-29 09:41:04.000000000 +0100
-+++ linux-2.6.28.2/include/linux/atmel_mpopfb.h 2009-01-29 09:43:46.000000000 +0100
-@@ -42,9 +42,11 @@
- unsigned xsize;
- unsigned ysize;
-
-- /* Signal that we should flip the video. */
-+ /* Signal for flipping the video. */
- int flip;
-
-+ /* Signal for disabling the line cache. */
-+ int line_cache_disable;
- };
-
- enum atmel_mpopfb_overlay_type {
diff --git a/target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-203-avr32-fix-arch-header-byteorder.patch b/target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-203-avr32-fix-arch-header-byteorder.patch
deleted file mode 100644
index ac990f9cd..000000000
--- a/target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-203-avr32-fix-arch-header-byteorder.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-Index: linux-2.6.27.6/arch/avr32/include/asm/byteorder.h
-===================================================================
---- linux-2.6.27.6.orig/arch/avr32/include/asm/byteorder.h 2008-11-28 16:47:15.000000000 +0100
-+++ linux-2.6.27.6/arch/avr32/include/asm/byteorder.h 2008-11-28 16:47:31.000000000 +0100
-@@ -7,8 +7,9 @@
- #include <asm/types.h>
- #include <linux/compiler.h>
-
--#define __BIG_ENDIAN
-+#define __BIG_ENDIAN 4321
- #define __SWAB_64_THRU_32__
-+#define __BYTEORDER_HAS_U64__
-
- #ifdef __CHECKER__
- extern unsigned long __builtin_bswap_32(unsigned long x);
-@@ -33,5 +34,5 @@
- #define __arch_swab32 __arch_swab32
- #endif
-
--#include <linux/byteorder.h>
-+#include <linux/byteorder/big_endian.h>
- #endif /* __ASM_AVR32_BYTEORDER_H */
-Index: linux-2.6.27.6/arch/avr32/mach-at32ap/include/mach/io.h
-===================================================================
---- linux-2.6.27.6.orig/arch/avr32/mach-at32ap/include/mach/io.h 2008-11-28 16:47:58.000000000 +0100
-+++ linux-2.6.27.6/arch/avr32/mach-at32ap/include/mach/io.h 2008-11-28 16:48:15.000000000 +0100
-@@ -1,7 +1,7 @@
- #ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
- #define __ASM_AVR32_ARCH_AT32AP_IO_H
-
--#include <linux/swab.h>
-+#include <linux/byteorder/swabb.h>
-
- #if defined(CONFIG_AP700X_32_BIT_SMC)
- # define __swizzle_addr_b(addr) (addr ^ 3UL)
diff --git a/target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-204-avr32-ap700x-fix-det_pin-for-nand-flash.patch b/target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-204-avr32-ap700x-fix-det_pin-for-nand-flash.patch
deleted file mode 100644
index 05522da5b..000000000
--- a/target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2/linux-2.6.28.7-204-avr32-ap700x-fix-det_pin-for-nand-flash.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-diff -urN linux-2.6.28.2-0rig//arch/avr32/boards/atstk1000/atstk1002.c linux-2.6.28.2/arch/avr32/boards/atstk1000/atstk1002.c
---- linux-2.6.28.2-0rig//arch/avr32/boards/atstk1000/atstk1002.c 2009-01-29 08:39:35.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/boards/atstk1000/atstk1002.c 2009-01-29 09:50:56.000000000 +0100
-@@ -99,6 +99,7 @@
- static struct atmel_nand_data atstk1006_nand_data __initdata = {
- .cle = 21,
- .ale = 22,
-+ .det_pin = GPIO_PIN_NONE,
- .rdy_pin = GPIO_PIN_PB(30),
- .enable_pin = GPIO_PIN_PB(29),
- .partition_info = nand_part_info,
-diff -urN linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/at32ap700x.c linux-2.6.28.2/arch/avr32/mach-at32ap/at32ap700x.c
---- linux-2.6.28.2-0rig//arch/avr32/mach-at32ap/at32ap700x.c 2009-01-29 09:41:04.000000000 +0100
-+++ linux-2.6.28.2/arch/avr32/mach-at32ap/at32ap700x.c 2009-01-29 09:50:56.000000000 +0100
-@@ -1972,13 +1972,14 @@
- goto fail;
-
- hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_NAND_ENABLE);
-- if (data->enable_pin)
-+
-+ if (gpio_is_valid(data->enable_pin))
- at32_select_gpio(data->enable_pin,
- AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-- if (data->rdy_pin)
-- at32_select_gpio(data->rdy_pin, 0);
-- if (data->det_pin)
-+ if (gpio_is_valid(data->det_pin))
- at32_select_gpio(data->det_pin, 0);
-+ if (gpio_is_valid(data->rdy_pin))
-+ at32_select_gpio(data->rdy_pin, 0);
-
- platform_device_add(pdev);
- return pdev;
diff --git a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-100-avr32-atmel.1.patch b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-100-avr32-atmel.1.patch
deleted file mode 100644
index 11bcdae04..000000000
--- a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-100-avr32-atmel.1.patch
+++ /dev/null
@@ -1,26786 +0,0 @@
-diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
-index dbfd9f7..b2a96fe 100644
---- a/arch/arm/mach-at91/include/mach/cpu.h
-+++ b/arch/arm/mach-at91/include/mach/cpu.h
-@@ -99,5 +99,6 @@ static inline unsigned long at91_arch_identify(void)
- * definitions may reduce clutter in common drivers.
- */
- #define cpu_is_at32ap7000() (0)
-+#define cpu_is_at32ap7200() (0)
-
- #endif
-diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
-index 7c239a9..6cef643 100644
---- a/arch/avr32/Kconfig
-+++ b/arch/avr32/Kconfig
-@@ -83,6 +83,18 @@ config MMU
- config PERFORMANCE_COUNTERS
- bool
-
-+# The old "PIO" portmux/GPIO module used on AT32AP700x
-+config PORTMUX_PIO
-+ bool
-+
-+# The new "GPIO" portmux/GPIO module, version 2
-+config PORTMUX_GPIO_V2
-+ bool
-+
-+# Asynchronous Timer clocksource/clockevent driver
-+config TIMER_AST
-+ bool
-+
- config PLATFORM_AT32AP
- bool
- select SUBARCH_AVR32B
-@@ -99,6 +111,7 @@ config PLATFORM_AT32AP
- config CPU_AT32AP700X
- bool
- select PLATFORM_AT32AP
-+ select PORTMUX_PIO
- config CPU_AT32AP7000
- bool
- select CPU_AT32AP700X
-@@ -109,6 +122,16 @@ config CPU_AT32AP7002
- bool
- select CPU_AT32AP700X
-
-+# AP7200 derivatives
-+config CPU_AT32AP720X
-+ bool
-+ select PLATFORM_AT32AP
-+ select TIMER_AST
-+ select PORTMUX_GPIO_V2
-+config CPU_AT32AP7200
-+ bool
-+ select CPU_AT32AP720X
-+
- choice
- prompt "AVR32 board type"
- default BOARD_ATSTK1000
-@@ -119,11 +142,19 @@ config BOARD_ATSTK1000
- config BOARD_ATNGW100
- bool "ATNGW100 Network Gateway"
- select CPU_AT32AP7000
-+
-+config BOARD_FAVR_32
-+ bool "Favr-32 LCD-board"
-+ select CPU_AT32AP7000
-+
-+config BOARD_MIMC200
-+ bool "MIMC200 CPU board"
-+ select CPU_AT32AP7000
- endchoice
-
--if BOARD_ATSTK1000
- source "arch/avr32/boards/atstk1000/Kconfig"
--endif
-+source "arch/avr32/boards/atngw100/Kconfig"
-+source "arch/avr32/boards/favr-32/Kconfig"
-
- choice
- prompt "Boot loader type"
-@@ -138,14 +169,17 @@ source "arch/avr32/mach-at32ap/Kconfig"
- config LOAD_ADDRESS
- hex
- default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
-+ default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP720X=y
-
- config ENTRY_ADDRESS
- hex
- default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
-+ default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP720X=y
-
- config PHYS_OFFSET
- hex
- default 0x10000000 if CPU_AT32AP700X=y
-+ default 0x10000000 if CPU_AT32AP720X=y
-
- source "kernel/Kconfig.preempt"
-
-diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
-index c9e1f0b..b088e10 100644
---- a/arch/avr32/Makefile
-+++ b/arch/avr32/Makefile
-@@ -33,6 +33,8 @@ head-y += arch/avr32/kernel/head.o
- core-y += $(machdirs)
- core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/
- core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/
-+core-$(CONFIG_BOARD_FAVR_32) += arch/avr32/boards/favr-32/
-+core-$(CONFIG_BOARD_MIMC200) += arch/avr32/boards/mimc200/
- core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/
- core-y += arch/avr32/kernel/
- core-y += arch/avr32/mm/
-diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig
-new file mode 100644
-index 0000000..b3f9947
---- /dev/null
-+++ b/arch/avr32/boards/atngw100/Kconfig
-@@ -0,0 +1,35 @@
-+# NGW100 customization
-+
-+if BOARD_ATNGW100
-+
-+config BOARD_ATNGW100_EVKLCD10X
-+ bool "Add support for EVKLCD10X addon board"
-+ help
-+ This enables support for the EVKLCD100 (QVGA) or EVKLCD101 (VGA)
-+ addon board for the NGW100. By enabling this the LCD controller and
-+ AC97 controller is added as platform devices.
-+
-+ This choice disables the detect pin and the write-protect pin for the
-+ MCI platform device, since it conflicts with the LCD platform device.
-+ The MCI pins can be reenabled by editing the "add device function" but
-+ this may break the setup for other displays that use these pins.
-+
-+ Choose 'Y' here if you have a EVKLCD100/101 connected to the NGW100.
-+
-+choice
-+ prompt "LCD panel resolution on EVKLCD10X"
-+ depends on BOARD_ATNGW100_EVKLCD10X
-+ default BOARD_ATNGW100_EVKLCD10X_VGA
-+
-+config BOARD_ATNGW100_EVKLCD10X_QVGA
-+ bool "QVGA (320x240)"
-+
-+config BOARD_ATNGW100_EVKLCD10X_VGA
-+ bool "VGA (640x480)"
-+
-+config BOARD_ATNGW100_EVKLCD10X_POW_QVGA
-+ bool "Powertip QVGA (320x240)"
-+
-+endchoice
-+
-+endif # BOARD_ATNGW100
-diff --git a/arch/avr32/boards/atngw100/Makefile b/arch/avr32/boards/atngw100/Makefile
-index c740aa1..6376f53 100644
---- a/arch/avr32/boards/atngw100/Makefile
-+++ b/arch/avr32/boards/atngw100/Makefile
-@@ -1 +1,2 @@
--obj-y += setup.o flash.o
-+obj-y += setup.o flash.o
-+obj-$(CONFIG_BOARD_ATNGW100_EVKLCD10X) += evklcd10x.o
-diff --git a/arch/avr32/boards/atngw100/evklcd10x.c b/arch/avr32/boards/atngw100/evklcd10x.c
-new file mode 100644
-index 0000000..8140b22
---- /dev/null
-+++ b/arch/avr32/boards/atngw100/evklcd10x.c
-@@ -0,0 +1,155 @@
-+/*
-+ * Board-specific setup code for the ATEVKLCD10X addon board to the ATNGW100
-+ * Network Gateway
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/linkage.h>
-+#include <linux/fb.h>
-+#include <linux/platform_device.h>
-+
-+#include <video/atmel_lcdc.h>
-+
-+#include <asm/setup.h>
-+
-+#include <mach/at32ap700x.h>
-+#include <mach/board.h>
-+
-+static struct ac97c_platform_data __initdata ac97c0_data = {
-+ .dma_rx_periph_id = 3,
-+ .dma_tx_periph_id = 4,
-+ .dma_controller_id = 0,
-+ .reset_pin = GPIO_PIN_PB(19),
-+};
-+
-+#ifdef CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA
-+static struct fb_videomode __initdata tcg057vglad_modes[] = {
-+ {
-+ .name = "640x480 @ 60",
-+ .refresh = 60,
-+ .xres = 640, .yres = 480,
-+ .pixclock = KHZ2PICOS(25180),
-+
-+ .left_margin = 64, .right_margin = 31,
-+ .upper_margin = 34, .lower_margin = 2,
-+ .hsync_len = 96, .vsync_len = 4,
-+
-+ .sync = 0,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
-+
-+static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
-+ .manufacturer = "KYO",
-+ .monitor = "TCG057VGLAD",
-+ .modedb = tcg057vglad_modes,
-+ .modedb_len = ARRAY_SIZE(tcg057vglad_modes),
-+ .hfmin = 19948,
-+ .hfmax = 31478,
-+ .vfmin = 50,
-+ .vfmax = 67,
-+ .dclkmax = 28330000,
-+};
-+
-+static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
-+ .default_bpp = 16,
-+ .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-+ .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
-+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-+ | ATMEL_LCDC_MEMOR_BIG),
-+ .default_monspecs = &atevklcd10x_default_monspecs,
-+ .guard_time = 2,
-+};
-+#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA
-+static struct fb_videomode __initdata tcg057qvlad_modes[] = {
-+ {
-+ .name = "320x240 @ 60",
-+ .refresh = 60,
-+ .xres = 320, .yres = 240,
-+ .pixclock = KHZ2PICOS(6300),
-+
-+ .left_margin = 52, .right_margin = 28,
-+ .upper_margin = 7, .lower_margin = 2,
-+ .hsync_len = 96, .vsync_len = 4,
-+
-+ .sync = 0,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
-+
-+static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
-+ .manufacturer = "KYO",
-+ .monitor = "TCG057QVLAD",
-+ .modedb = tcg057qvlad_modes,
-+ .modedb_len = ARRAY_SIZE(tcg057qvlad_modes),
-+ .hfmin = 19948,
-+ .hfmax = 31478,
-+ .vfmin = 50,
-+ .vfmax = 67,
-+ .dclkmax = 7000000,
-+};
-+
-+static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
-+ .default_bpp = 16,
-+ .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-+ .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
-+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-+ | ATMEL_LCDC_MEMOR_BIG),
-+ .default_monspecs = &atevklcd10x_default_monspecs,
-+ .guard_time = 2,
-+};
-+#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA
-+static struct fb_videomode __initdata ph320240t_modes[] = {
-+ {
-+ .name = "320x240 @ 60",
-+ .refresh = 60,
-+ .xres = 320, .yres = 240,
-+ .pixclock = KHZ2PICOS(6300),
-+
-+ .left_margin = 38, .right_margin = 20,
-+ .upper_margin = 15, .lower_margin = 5,
-+ .hsync_len = 30, .vsync_len = 3,
-+
-+ .sync = 0,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
-+
-+static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
-+ .manufacturer = "POW",
-+ .monitor = "PH320240T",
-+ .modedb = ph320240t_modes,
-+ .modedb_len = ARRAY_SIZE(ph320240t_modes),
-+ .hfmin = 14400,
-+ .hfmax = 21600,
-+ .vfmin = 50,
-+ .vfmax = 90,
-+ .dclkmax = 6400000,
-+};
-+
-+static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
-+ .default_bpp = 16,
-+ .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-+ .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
-+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-+ | ATMEL_LCDC_MEMOR_BIG),
-+ .default_monspecs = &atevklcd10x_default_monspecs,
-+ .guard_time = 2,
-+};
-+#endif
-+
-+static int __init atevklcd10x_init(void)
-+{
-+ at32_add_device_ac97c(0, &ac97c0_data);
-+
-+ at32_add_device_lcdc(0, &atevklcd10x_lcdc_data,
-+ fbmem_start, fbmem_size, 1);
-+ return 0;
-+}
-+postcore_initcall(atevklcd10x_init);
-diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
-index b8286f1..32fb9ba 100644
---- a/arch/avr32/boards/atngw100/setup.c
-+++ b/arch/avr32/boards/atngw100/setup.c
-@@ -9,6 +9,7 @@
- */
- #include <linux/clk.h>
- #include <linux/etherdevice.h>
-+#include <linux/gpio.h>
- #include <linux/irq.h>
- #include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
-@@ -53,8 +54,16 @@ static struct spi_board_info spi0_board_info[] __initdata = {
- };
-
- static struct mci_platform_data __initdata mci0_data = {
-- .detect_pin = GPIO_PIN_PC(25),
-- .wp_pin = GPIO_PIN_PE(0),
-+ .slot[0] = {
-+ .bus_width = 4,
-+#ifndef CONFIG_BOARD_ATNGW100_EVKLCD10X
-+ .detect_pin = GPIO_PIN_PC(25),
-+ .wp_pin = GPIO_PIN_PE(0),
-+#else
-+ .detect_pin = GPIO_PIN_NONE,
-+ .wp_pin = GPIO_PIN_NONE,
-+#endif
-+ },
- };
-
- /*
-@@ -168,8 +177,6 @@ static int __init atngw100_init(void)
- * reserve any pins for it.
- */
-
-- at32_add_system_devices();
--
- at32_add_device_usart(0);
-
- set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
-@@ -190,7 +197,7 @@ static int __init atngw100_init(void)
- * PB28/EXTINT3 doesn't; it should be SMBALERT# (for PMBus),
- * but it's not available off-board.
- */
-- at32_select_periph(GPIO_PIN_PB(28), 0, AT32_GPIOF_PULLUP);
-+ at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP);
- at32_select_gpio(i2c_gpio_data.sda_pin,
- AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
- at32_select_gpio(i2c_gpio_data.scl_pin,
-@@ -204,6 +211,15 @@ postcore_initcall(atngw100_init);
-
- static int __init atngw100_arch_init(void)
- {
-+ /* PB30 is the otherwise unused jumper on the mainboard, with an
-+ * external pullup; the jumper grounds it. Use it however you
-+ * like, including letting U-Boot or Linux tweak boot sequences.
-+ */
-+ at32_select_gpio(GPIO_PIN_PB(30), 0);
-+ gpio_request(GPIO_PIN_PB(30), "j15");
-+ gpio_direction_input(GPIO_PIN_PB(30));
-+ gpio_export(GPIO_PIN_PB(30), false);
-+
- /* set_irq_type() after the arch_initcall for EIC has run, and
- * before the I2C subsystem could try using this IRQ.
- */
-diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
-index 8dc4821..0884884 100644
---- a/arch/avr32/boards/atstk1000/Kconfig
-+++ b/arch/avr32/boards/atstk1000/Kconfig
-@@ -18,6 +18,10 @@ config BOARD_ATSTK1004
- bool "ATSTK1004"
- select CPU_AT32AP7002
-
-+config BOARD_ATSTK1005
-+ bool "ATSTK1005"
-+ select CPU_AT32AP7200
-+
- config BOARD_ATSTK1006
- bool "ATSTK1006"
- select CPU_AT32AP7000
-diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile
-index edecee0..d0f248d 100644
---- a/arch/avr32/boards/atstk1000/Makefile
-+++ b/arch/avr32/boards/atstk1000/Makefile
-@@ -2,4 +2,5 @@ obj-y += setup.o flash.o
- obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o
- obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o
- obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o
-+obj-$(CONFIG_BOARD_ATSTK1005) += atstk1005.o
- obj-$(CONFIG_BOARD_ATSTK1006) += atstk1002.o
-diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
-index dfc3443..11e7800 100644
---- a/arch/avr32/boards/atstk1000/atstk1002.c
-+++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -232,7 +232,7 @@ static void __init atstk1002_setup_extdac(void)
- goto err_set_clk;
- }
-
-- at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
-+ at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
- at73c213_data.dac_clk = gclk;
-
- err_set_clk:
-@@ -264,16 +264,20 @@ void __init setup_board(void)
-
- #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-
-+static struct mci_platform_data __initdata mci0_data = {
-+ .slot[0] = {
-+ .bus_width = 4,
-+
- /* MMC card detect requires MACB0 *NOT* be used */
- #ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
--static struct mci_platform_data __initdata mci0_data = {
-- .detect_pin = GPIO_PIN_PC(14), /* gpio30/sdcd */
-- .wp_pin = GPIO_PIN_PC(15), /* gpio31/sdwp */
--};
--#define MCI_PDATA &mci0_data
-+ .detect_pin = GPIO_PIN_PC(14), /* gpio30/sdcd */
-+ .wp_pin = GPIO_PIN_PC(15), /* gpio31/sdwp */
- #else
--#define MCI_PDATA NULL
-+ .detect_pin = -ENODEV,
-+ .wp_pin = -ENODEV,
- #endif /* SW6 for sd{cd,wp} routing */
-+ },
-+};
-
- #endif /* SW2 for MMC signal routing */
-
-@@ -283,25 +287,7 @@ static int __init atstk1002_init(void)
- * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
- * SDRAM-specific pins so that nobody messes with them.
- */
-- at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */
-- at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */
-- at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */
-- at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */
-- at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */
-- at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */
-- at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */
-- at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */
-- at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */
-- at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */
-- at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */
-- at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */
-- at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */
-- at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */
-- at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */
-- at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */
-- at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */
--
-- at32_add_system_devices();
-+ at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
-
- #ifdef CONFIG_BOARD_ATSTK1006
- smc_set_timing(&nand_config, &nand_timing);
-@@ -326,13 +312,14 @@ static int __init atstk1002_init(void)
- at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
- #endif
- #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-- at32_add_device_mci(0, MCI_PDATA);
-+ at32_add_device_mci(0, &mci0_data);
- #endif
- #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
- set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
- #else
- at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-- fbmem_start, fbmem_size, 0);
-+ fbmem_start, fbmem_size,
-+ ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
- #endif
- at32_add_device_usba(0, NULL);
- #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
-diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
-index 0cf6641..ac31666 100644
---- a/arch/avr32/boards/atstk1000/atstk1003.c
-+++ b/arch/avr32/boards/atstk1000/atstk1003.c
-@@ -19,6 +19,7 @@
- #include <linux/spi/spi.h>
-
- #include <asm/setup.h>
-+#include <asm/atmel-mci.h>
-
- #include <mach/at32ap700x.h>
- #include <mach/board.h>
-@@ -66,6 +67,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { {
- } };
- #endif
-
-+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-+static struct mci_platform_data __initdata mci0_data = {
-+ .slot[0] = {
-+ .bus_width = 4,
-+ .detect_pin = -ENODEV,
-+ .wp_pin = -ENODEV,
-+ },
-+};
-+#endif
-+
- #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
- static void __init atstk1003_setup_extdac(void)
- {
-@@ -84,7 +95,7 @@ static void __init atstk1003_setup_extdac(void)
- goto err_set_clk;
- }
-
-- at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
-+ at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
- at73c213_data.dac_clk = gclk;
-
- err_set_clk:
-@@ -120,25 +131,7 @@ static int __init atstk1003_init(void)
- * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
- * SDRAM-specific pins so that nobody messes with them.
- */
-- at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */
-- at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */
-- at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */
-- at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */
-- at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */
-- at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */
-- at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */
-- at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */
-- at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */
-- at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */
-- at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */
-- at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */
-- at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */
-- at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */
-- at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */
-- at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */
-- at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */
--
-- at32_add_system_devices();
-+ at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
-
- #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_add_device_usart(1);
-@@ -154,7 +147,7 @@ static int __init atstk1003_init(void)
- at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
- #endif
- #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-- at32_add_device_mci(0, NULL);
-+ at32_add_device_mci(0, &mci0_data);
- #endif
- at32_add_device_usba(0, NULL);
- #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
-diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
-index 50a5273..cb32eb8 100644
---- a/arch/avr32/boards/atstk1000/atstk1004.c
-+++ b/arch/avr32/boards/atstk1000/atstk1004.c
-@@ -21,6 +21,7 @@
- #include <video/atmel_lcdc.h>
-
- #include <asm/setup.h>
-+#include <asm/atmel-mci.h>
-
- #include <mach/at32ap700x.h>
- #include <mach/board.h>
-@@ -71,6 +72,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { {
- } };
- #endif
-
-+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-+static struct mci_platform_data __initdata mci0_data = {
-+ .slot[0] = {
-+ .bus_width = 4,
-+ .detect_pin = -ENODEV,
-+ .wp_pin = -ENODEV,
-+ },
-+};
-+#endif
-+
- #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
- static void __init atstk1004_setup_extdac(void)
- {
-@@ -89,7 +100,7 @@ static void __init atstk1004_setup_extdac(void)
- goto err_set_clk;
- }
-
-- at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
-+ at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
- at73c213_data.dac_clk = gclk;
-
- err_set_clk:
-@@ -121,8 +132,6 @@ void __init setup_board(void)
-
- static int __init atstk1004_init(void)
- {
-- at32_add_system_devices();
--
- #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_add_device_usart(1);
- #else
-@@ -137,10 +146,11 @@ static int __init atstk1004_init(void)
- at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
- #endif
- #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-- at32_add_device_mci(0, NULL);
-+ at32_add_device_mci(0, &mci0_data);
- #endif
- at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-- fbmem_start, fbmem_size, 0);
-+ fbmem_start, fbmem_size,
-+ ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
- at32_add_device_usba(0, NULL);
- #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
- at32_add_device_ssc(0, ATMEL_SSC_TX);
-diff --git a/arch/avr32/boards/atstk1000/atstk1005.c b/arch/avr32/boards/atstk1000/atstk1005.c
-new file mode 100644
-index 0000000..f5a9baa
---- /dev/null
-+++ b/arch/avr32/boards/atstk1000/atstk1005.c
-@@ -0,0 +1,225 @@
-+/*
-+ * ATSTK1005 daughterboard-specific init code
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/list.h>
-+#include <linux/string.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/spi/spi.h>
-+
-+#include <asm/atmel-mci.h>
-+#include <asm/setup.h>
-+
-+#include <mach/at32ap720x.h>
-+#include <mach/board.h>
-+#include <mach/init.h>
-+#include <mach/portmux.h>
-+#include <mach/smc.h>
-+
-+#include "atstk1000.h"
-+
-+/* Oscillator frequencies. These are board specific */
-+unsigned long at32_board_osc_rates[4] = {
-+ [0] = 20000000, /* 20 MHz on osc0 */
-+ [1] = 0, /* Nothing on osc1 */
-+ [2] = 12000000, /* 12 MHz on osc2 */
-+ [3] = 32768, /* 32.768 kHz on RTC osc */
-+};
-+
-+struct eth_addr {
-+ u8 addr[6];
-+};
-+
-+static struct eth_addr __initdata hw_addr;
-+static struct eth_platform_data __initdata eth_data;
-+
-+static struct mci_platform_data mci_data __initdata = {
-+ .slot[0] = {
-+ .detect_pin = GPIO_PIN_NONE,
-+ .wp_pin = GPIO_PIN_NONE,
-+ .bus_width = 4,
-+ },
-+ .slot[1] = {
-+ .detect_pin = GPIO_PIN_PA(30),
-+ .wp_pin = GPIO_PIN_PA(31),
-+ .bus_width = 8,
-+ },
-+};
-+
-+static struct spi_board_info spi0_board_info[] __initdata = {
-+ {
-+ /* AT45DB642D: 8MB DataFlash */
-+ .modalias = "mtd_dataflash",
-+ .max_speed_hz = 8000000,
-+ .chip_select = 0,
-+ .mode = SPI_MODE_0,
-+ }, {
-+ /* QVGA display */
-+ .modalias = "ltv350qv",
-+ .max_speed_hz = 8000000,
-+ .chip_select = 2,
-+ .mode = SPI_MODE_3,
-+ },
-+};
-+
-+static struct smc_timing nand_timing __initdata = {
-+ .ncs_read_setup = 0,
-+ .nrd_setup = 10,
-+ .ncs_write_setup = 0,
-+ .nwe_setup = 10,
-+
-+ .ncs_read_pulse = 30,
-+ .nrd_pulse = 15,
-+ .ncs_write_pulse = 30,
-+ .nwe_pulse = 15,
-+
-+ .read_cycle = 30,
-+ .write_cycle = 30,
-+
-+ .ncs_read_recover = 0,
-+ .nrd_recover = 15,
-+ .ncs_write_recover = 0,
-+ .nwe_recover = 50,
-+};
-+
-+static struct smc_config nand_config __initdata = {
-+ .bus_width = 1,
-+ .nrd_controlled = 1,
-+ .nwe_controlled = 1,
-+ .nwait_mode = 0,
-+ .byte_write = 0,
-+ .tdf_cycles = 3,
-+ .tdf_mode = 0,
-+};
-+
-+static struct mtd_partition nand_partitions[] = {
-+ {
-+ .name = "u-boot",
-+ .offset = 0,
-+ .size = 131072,
-+ }, {
-+ .name = "kernel",
-+ .offset = 262144,
-+ .size = 2097152,
-+ }, {
-+ .name = "user",
-+ .offset = 2359296,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+/* Isn't this rather more complicated than necessary? */
-+static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(nand_partitions);
-+ return nand_partitions;
-+}
-+
-+static struct atmel_nand_data nand_data __initdata = {
-+ .cle = 21,
-+ .ale = 22,
-+ .rdy_pin = GPIO_PIN_PE(31),
-+ .enable_pin = GPIO_PIN_PF(2),
-+ .det_pin = GPIO_PIN_NONE,
-+ .partition_info = nand_part_info,
-+};
-+
-+
-+/*
-+ * Grab ethernet address and PHY address provided by the boot loader.
-+ */
-+static int __init parse_tag_ethernet(struct tag *tag)
-+{
-+ struct tag_ethernet *etag = &tag->u.ethernet;
-+
-+ if (etag->mac_index == 0) {
-+ eth_data.phy_mask = ~(1U << etag->mii_phy_addr);
-+ memcpy(&hw_addr.addr, etag->hw_address, sizeof(hw_addr.addr));
-+ }
-+
-+ return 0;
-+}
-+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
-+
-+/*
-+ * We need to get rid of this crap and pass the mac address to the
-+ * driver explicitly.
-+ */
-+#include <linux/clk.h>
-+#include <linux/etherdevice.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/platform_device.h>
-+static void __init set_hw_addr(struct platform_device *pdev)
-+{
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ const u8 *addr;
-+ void __iomem *regs;
-+ struct clk *pclk;
-+
-+ if (!res)
-+ return;
-+ if (pdev->id != 0)
-+ return;
-+
-+ addr = hw_addr.addr;
-+ if (!is_valid_ether_addr(addr))
-+ return;
-+
-+ /*
-+ * Since this is board-specific code, we'll cheat and use the
-+ * physical address directly as we happen to know that it's
-+ * the same as the virtual address.
-+ */
-+ regs = (void __iomem __force *)res->start;
-+ pclk = clk_get(&pdev->dev, "pclk");
-+ if (!pclk)
-+ return;
-+
-+ clk_enable(pclk);
-+ __raw_writel((addr[3] << 24) | (addr[2] << 16)
-+ | (addr[1] << 8) | addr[0], regs + 0x98);
-+ __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
-+ clk_disable(pclk);
-+ clk_put(pclk);
-+}
-+
-+void __init setup_board(void)
-+{
-+ at32_map_usart(4, 0); /* USART4: /dev/ttyS0, DB9 */
-+ at32_setup_serial_console(0);
-+}
-+
-+static int __init atstk1005_init(void)
-+{
-+ struct platform_device *lcdc_pdev;
-+
-+ at32_add_device_usart(0);
-+
-+ set_hw_addr(at32_add_device_eth(0, &eth_data));
-+ lcdc_pdev = at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-+ fbmem_start, fbmem_size, 0);
-+ at32_add_device_mpop(0, lcdc_pdev, fbmem_start, fbmem_size);
-+ at32_add_device_mci(0, &mci_data);
-+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-+
-+ /* NAND Flash */
-+ smc_set_timing(&nand_config, &nand_timing);
-+ smc_set_configuration(3, &nand_config);
-+ at32_add_device_nand(0, &nand_data);
-+
-+ /* USB OHCI/EHCI host */
-+ at32_add_device_ohci(0);
-+ at32_add_device_ehci(0);
-+
-+ return 0;
-+}
-+postcore_initcall(atstk1005_init);
-diff --git a/arch/avr32/boards/favr-32/Kconfig b/arch/avr32/boards/favr-32/Kconfig
-new file mode 100644
-index 0000000..2c83d1d
---- /dev/null
-+++ b/arch/avr32/boards/favr-32/Kconfig
-@@ -0,0 +1,22 @@
-+# Favr-32 customization
-+
-+if BOARD_FAVR_32
-+
-+config BOARD_FAVR32_ABDAC_RATE
-+ int "DAC target rate"
-+ default 44100
-+ range 32000 50000
-+ help
-+ Specify the target rate the internal DAC should try to match. This
-+ will use PLL1 to generate a frequency as close as possible to this
-+ rate.
-+
-+ Must be within the range 32000 to 50000, which should be suitable to
-+ generate most other frequencies in power of 2 steps.
-+
-+ Ex:
-+ 48000 will also suit 24000 and 12000
-+ 44100 will also suit 22050 and 11025
-+ 32000 will also suit 16000 and 8000
-+
-+endif # BOARD_FAVR_32
-diff --git a/arch/avr32/boards/favr-32/Makefile b/arch/avr32/boards/favr-32/Makefile
-new file mode 100644
-index 0000000..234f215
---- /dev/null
-+++ b/arch/avr32/boards/favr-32/Makefile
-@@ -0,0 +1 @@
-+obj-y += setup.o flash.o
-diff --git a/arch/avr32/boards/favr-32/flash.c b/arch/avr32/boards/favr-32/flash.c
-new file mode 100644
-index 0000000..604bbd5
---- /dev/null
-+++ b/arch/avr32/boards/favr-32/flash.c
-@@ -0,0 +1,98 @@
-+/*
-+ * Favr-32 board-specific flash initialization
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/physmap.h>
-+
-+#include <mach/smc.h>
-+
-+static struct smc_timing flash_timing __initdata = {
-+ .ncs_read_setup = 0,
-+ .nrd_setup = 40,
-+ .ncs_write_setup = 0,
-+ .nwe_setup = 10,
-+
-+ .ncs_read_pulse = 80,
-+ .nrd_pulse = 40,
-+ .ncs_write_pulse = 65,
-+ .nwe_pulse = 55,
-+
-+ .read_cycle = 120,
-+ .write_cycle = 120,
-+};
-+
-+static struct smc_config flash_config __initdata = {
-+ .bus_width = 2,
-+ .nrd_controlled = 1,
-+ .nwe_controlled = 1,
-+ .byte_write = 1,
-+};
-+
-+static struct mtd_partition flash_parts[] = {
-+ {
-+ .name = "u-boot",
-+ .offset = 0x00000000,
-+ .size = 0x00020000, /* 128 KiB */
-+ .mask_flags = MTD_WRITEABLE,
-+ },
-+ {
-+ .name = "root",
-+ .offset = 0x00020000,
-+ .size = 0x007d0000,
-+ },
-+ {
-+ .name = "env",
-+ .offset = 0x007f0000,
-+ .size = 0x00010000,
-+ .mask_flags = MTD_WRITEABLE,
-+ },
-+};
-+
-+static struct physmap_flash_data flash_data = {
-+ .width = 2,
-+ .nr_parts = ARRAY_SIZE(flash_parts),
-+ .parts = flash_parts,
-+};
-+
-+static struct resource flash_resource = {
-+ .start = 0x00000000,
-+ .end = 0x007fffff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device flash_device = {
-+ .name = "physmap-flash",
-+ .id = 0,
-+ .resource = &flash_resource,
-+ .num_resources = 1,
-+ .dev = {
-+ .platform_data = &flash_data,
-+ },
-+};
-+
-+/* This needs to be called after the SMC has been initialized */
-+static int __init favr32_flash_init(void)
-+{
-+ int ret;
-+
-+ smc_set_timing(&flash_config, &flash_timing);
-+ ret = smc_set_configuration(0, &flash_config);
-+ if (ret < 0) {
-+ printk(KERN_ERR "Favr-32: failed to set NOR flash timing\n");
-+ return ret;
-+ }
-+
-+ platform_device_register(&flash_device);
-+
-+ return 0;
-+}
-+device_initcall(favr32_flash_init);
-diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
-new file mode 100644
-index 0000000..1a12930
---- /dev/null
-+++ b/arch/avr32/boards/favr-32/setup.c
-@@ -0,0 +1,334 @@
-+/*
-+ * Favr-32 board-specific setup code.
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/etherdevice.h>
-+#include <linux/bootmem.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/types.h>
-+#include <linux/linkage.h>
-+#include <linux/gpio.h>
-+#include <linux/leds.h>
-+#include <linux/atmel-pwm-bl.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/ads7846.h>
-+
-+#include <video/atmel_lcdc.h>
-+
-+#include <asm/setup.h>
-+
-+#include <mach/at32ap700x.h>
-+#include <mach/init.h>
-+#include <mach/board.h>
-+#include <mach/portmux.h>
-+
-+/* Oscillator frequencies. These are board-specific */
-+unsigned long at32_board_osc_rates[3] = {
-+ [0] = 32768, /* 32.768 kHz on RTC osc */
-+ [1] = 20000000, /* 20 MHz on osc0 */
-+ [2] = 12000000, /* 12 MHz on osc1 */
-+};
-+
-+/* Initialized by bootloader-specific startup code. */
-+struct tag *bootloader_tags __initdata;
-+
-+struct eth_addr {
-+ u8 addr[6];
-+};
-+static struct eth_addr __initdata hw_addr[1];
-+static struct eth_platform_data __initdata eth_data[1] = {
-+ {
-+ .phy_mask = ~(1U << 1),
-+ },
-+};
-+
-+static int ads7843_get_pendown_state(void)
-+{
-+ return !gpio_get_value(GPIO_PIN_PB(3));
-+}
-+
-+static struct ads7846_platform_data ads7843_data = {
-+ .model = 7843,
-+ .get_pendown_state = ads7843_get_pendown_state,
-+ .pressure_max = 255,
-+ /*
-+ * Values below are for debounce filtering, these can be experimented
-+ * with further.
-+ */
-+ .debounce_max = 20,
-+ .debounce_rep = 4,
-+ .debounce_tol = 5,
-+};
-+
-+static struct spi_board_info __initdata spi1_board_info[] = {
-+ {
-+ /* ADS7843 touch controller */
-+ .modalias = "ads7846",
-+ .max_speed_hz = 2000000,
-+ .chip_select = 0,
-+ .bus_num = 1,
-+ .platform_data = &ads7843_data,
-+ },
-+};
-+
-+static struct fb_videomode __initdata lb104v03_modes[] = {
-+ {
-+ .name = "640x480 @ 50",
-+ .refresh = 50,
-+ .xres = 640, .yres = 480,
-+ .pixclock = KHZ2PICOS(25100),
-+
-+ .left_margin = 90, .right_margin = 70,
-+ .upper_margin = 30, .lower_margin = 15,
-+ .hsync_len = 12, .vsync_len = 2,
-+
-+ .sync = 0,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
-+
-+static struct fb_monspecs __initdata favr32_default_monspecs = {
-+ .manufacturer = "LG",
-+ .monitor = "LB104V03",
-+ .modedb = lb104v03_modes,
-+ .modedb_len = ARRAY_SIZE(lb104v03_modes),
-+ .hfmin = 27273,
-+ .hfmax = 31111,
-+ .vfmin = 45,
-+ .vfmax = 60,
-+ .dclkmax = 28000000,
-+};
-+
-+struct atmel_lcdfb_info __initdata favr32_lcdc_data = {
-+ .default_bpp = 16,
-+ .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-+ .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
-+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-+ | ATMEL_LCDC_MEMOR_BIG),
-+ .default_monspecs = &favr32_default_monspecs,
-+ .guard_time = 2,
-+};
-+
-+static struct gpio_led favr32_leds[] = {
-+ {
-+ .name = "green",
-+ .gpio = GPIO_PIN_PE(19),
-+ .default_trigger = "heartbeat",
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "red",
-+ .gpio = GPIO_PIN_PE(20),
-+ .active_low = 1,
-+ },
-+};
-+
-+static struct gpio_led_platform_data favr32_led_data = {
-+ .num_leds = ARRAY_SIZE(favr32_leds),
-+ .leds = favr32_leds,
-+};
-+
-+static struct platform_device favr32_led_dev = {
-+ .name = "leds-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &favr32_led_data,
-+ },
-+};
-+
-+/*
-+ * The next two functions should go away as the boot loader is
-+ * supposed to initialize the macb address registers with a valid
-+ * ethernet address. But we need to keep it around for a while until
-+ * we can be reasonably sure the boot loader does this.
-+ *
-+ * The phy_id is ignored as the driver will probe for it.
-+ */
-+static int __init parse_tag_ethernet(struct tag *tag)
-+{
-+ int i;
-+
-+ i = tag->u.ethernet.mac_index;
-+ if (i < ARRAY_SIZE(hw_addr))
-+ memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
-+ sizeof(hw_addr[i].addr));
-+
-+ return 0;
-+}
-+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
-+
-+static void __init set_hw_addr(struct platform_device *pdev)
-+{
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ const u8 *addr;
-+ void __iomem *regs;
-+ struct clk *pclk;
-+
-+ if (!res)
-+ return;
-+ if (pdev->id >= ARRAY_SIZE(hw_addr))
-+ return;
-+
-+ addr = hw_addr[pdev->id].addr;
-+ if (!is_valid_ether_addr(addr))
-+ return;
-+
-+ /*
-+ * Since this is board-specific code, we'll cheat and use the
-+ * physical address directly as we happen to know that it's
-+ * the same as the virtual address.
-+ */
-+ regs = (void __iomem __force *)res->start;
-+ pclk = clk_get(&pdev->dev, "pclk");
-+ if (!pclk)
-+ return;
-+
-+ clk_enable(pclk);
-+ __raw_writel((addr[3] << 24) | (addr[2] << 16)
-+ | (addr[1] << 8) | addr[0], regs + 0x98);
-+ __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
-+ clk_disable(pclk);
-+ clk_put(pclk);
-+}
-+
-+void __init favr32_setup_leds(void)
-+{
-+ unsigned i;
-+
-+ for (i = 0; i < ARRAY_SIZE(favr32_leds); i++)
-+ at32_select_gpio(favr32_leds[i].gpio, AT32_GPIOF_OUTPUT);
-+
-+ platform_device_register(&favr32_led_dev);
-+}
-+
-+static struct atmel_pwm_bl_platform_data atmel_pwm_bl_pdata = {
-+ .pwm_channel = 2,
-+ .pwm_frequency = 200000,
-+ .pwm_compare_max = 345,
-+ .pwm_duty_max = 345,
-+ .pwm_duty_min = 90,
-+ .pwm_active_low = 1,
-+ .gpio_on = GPIO_PIN_PA(28),
-+ .on_active_low = 0,
-+};
-+
-+static struct platform_device atmel_pwm_bl_dev = {
-+ .name = "atmel-pwm-bl",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &atmel_pwm_bl_pdata,
-+ },
-+};
-+
-+static void __init favr32_setup_atmel_pwm_bl(void)
-+{
-+ platform_device_register(&atmel_pwm_bl_dev);
-+ at32_select_gpio(atmel_pwm_bl_pdata.gpio_on, 0);
-+}
-+
-+void __init setup_board(void)
-+{
-+ at32_map_usart(3, 0); /* USART 3 => /dev/ttyS0 */
-+ at32_setup_serial_console(0);
-+}
-+
-+static int __init set_abdac_rate(struct platform_device *pdev)
-+{
-+ int retval;
-+ struct clk *osc1;
-+ struct clk *pll1;
-+ struct clk *abdac;
-+
-+ if (pdev == NULL)
-+ return -ENXIO;
-+
-+ osc1 = clk_get(NULL, "osc1");
-+ if (IS_ERR(osc1)) {
-+ retval = PTR_ERR(osc1);
-+ goto out;
-+ }
-+
-+ pll1 = clk_get(NULL, "pll1");
-+ if (IS_ERR(pll1)) {
-+ retval = PTR_ERR(pll1);
-+ goto out_osc1;
-+ }
-+
-+ abdac = clk_get(&pdev->dev, "sample_clk");
-+ if (IS_ERR(abdac)) {
-+ retval = PTR_ERR(abdac);
-+ goto out_pll1;
-+ }
-+
-+ retval = clk_set_parent(pll1, osc1);
-+ if (retval != 0)
-+ goto out_abdac;
-+
-+ /*
-+ * Rate is 32000 to 50000 and ABDAC oversamples 256x. Multiply, in
-+ * power of 2, to a value above 80 MHz. Power of 2 so it is possible
-+ * for the generic clock to divide it down again and 80 MHz is the
-+ * lowest frequency for the PLL.
-+ */
-+ retval = clk_round_rate(pll1,
-+ CONFIG_BOARD_FAVR32_ABDAC_RATE * 256 * 16);
-+ if (retval < 0)
-+ goto out_abdac;
-+
-+ retval = clk_set_rate(pll1, retval);
-+ if (retval != 0)
-+ goto out_abdac;
-+
-+ retval = clk_set_parent(abdac, pll1);
-+ if (retval != 0)
-+ goto out_abdac;
-+
-+out_abdac:
-+ clk_put(abdac);
-+out_pll1:
-+ clk_put(pll1);
-+out_osc1:
-+ clk_put(osc1);
-+out:
-+ return retval;
-+}
-+
-+static int __init favr32_init(void)
-+{
-+ /*
-+ * Favr-32 uses 32-bit SDRAM interface. Reserve the SDRAM-specific
-+ * pins so that nobody messes with them.
-+ */
-+ at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
-+
-+ at32_select_gpio(GPIO_PIN_PB(3), 0); /* IRQ from ADS7843 */
-+
-+ at32_add_device_usart(0);
-+
-+ set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
-+
-+ spi1_board_info[0].irq = gpio_to_irq(GPIO_PIN_PB(3));
-+
-+ set_abdac_rate(at32_add_device_abdac(0));
-+
-+ at32_add_device_pwm(1 << atmel_pwm_bl_pdata.pwm_channel);
-+ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
-+ at32_add_device_mci(0, NULL);
-+ at32_add_device_usba(0, NULL);
-+ at32_add_device_lcdc(0, &favr32_lcdc_data, fbmem_start, fbmem_size, 0);
-+
-+ favr32_setup_leds();
-+
-+ favr32_setup_atmel_pwm_bl();
-+
-+ return 0;
-+}
-+postcore_initcall(favr32_init);
-diff --git a/arch/avr32/boards/mimc200/Makefile b/arch/avr32/boards/mimc200/Makefile
-new file mode 100644
-index 0000000..79c076e
---- /dev/null
-+++ b/arch/avr32/boards/mimc200/Makefile
-@@ -0,0 +1 @@
-+obj-y += setup.o flash.o fram.o
-diff --git a/arch/avr32/boards/mimc200/flash.c b/arch/avr32/boards/mimc200/flash.c
-new file mode 100644
-index 0000000..d83d650
---- /dev/null
-+++ b/arch/avr32/boards/mimc200/flash.c
-@@ -0,0 +1,143 @@
-+/*
-+ * MIMC200 board-specific flash initialization
-+ *
-+ * Copyright (C) 2008 Mercury IMC Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/physmap.h>
-+
-+#include <mach/smc.h>
-+
-+static struct smc_timing flash_timing __initdata = {
-+ .ncs_read_setup = 0,
-+ .nrd_setup = 15,
-+ .ncs_write_setup = 0,
-+ .nwe_setup = 0,
-+
-+ .ncs_read_pulse = 115,
-+ .nrd_pulse = 110,
-+ .ncs_write_pulse = 60,
-+ .nwe_pulse = 60,
-+
-+ .read_cycle = 115,
-+ .write_cycle = 100,
-+};
-+
-+static struct smc_config flash_config __initdata = {
-+ .bus_width = 2,
-+ .nrd_controlled = 1,
-+ .nwe_controlled = 1,
-+ .byte_write = 1,
-+};
-+
-+/* system flash definition */
-+
-+static struct mtd_partition flash_parts_system[] = {
-+ {
-+ .name = "u-boot",
-+ .offset = 0x00000000,
-+ .size = 0x00020000, /* 128 KiB */
-+ .mask_flags = MTD_WRITEABLE,
-+ },
-+ {
-+ .name = "root",
-+ .offset = 0x00020000,
-+ .size = 0x007c0000,
-+ },
-+ {
-+ .name = "splash",
-+ .offset = 0x007e0000,
-+ .size = 0x00010000, /* 64KiB */
-+ },
-+ {
-+ .name = "env",
-+ .offset = 0x007f0000,
-+ .size = 0x00010000,
-+ .mask_flags = MTD_WRITEABLE,
-+ },
-+};
-+
-+static struct physmap_flash_data flash_system = {
-+ .width = 2,
-+ .nr_parts = ARRAY_SIZE(flash_parts_system),
-+ .parts = flash_parts_system,
-+};
-+
-+static struct resource flash_resource_system = {
-+ .start = 0x00000000,
-+ .end = 0x007fffff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device flash_device_system = {
-+ .name = "physmap-flash",
-+ .id = 0,
-+ .resource = &flash_resource_system,
-+ .num_resources = 1,
-+ .dev = {
-+ .platform_data = &flash_system,
-+ },
-+};
-+
-+/* data flash definition */
-+
-+static struct mtd_partition flash_parts_data[] = {
-+ {
-+ .name = "data",
-+ .offset = 0x00000000,
-+ .size = 0x00800000,
-+ },
-+};
-+
-+static struct physmap_flash_data flash_data = {
-+ .width = 2,
-+ .nr_parts = ARRAY_SIZE(flash_parts_data),
-+ .parts = flash_parts_data,
-+};
-+
-+static struct resource flash_resource_data = {
-+ .start = 0x08000000,
-+ .end = 0x087fffff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device flash_device_data = {
-+ .name = "physmap-flash",
-+ .id = 1,
-+ .resource = &flash_resource_data,
-+ .num_resources = 1,
-+ .dev = {
-+ .platform_data = &flash_data,
-+ },
-+};
-+
-+/* This needs to be called after the SMC has been initialized */
-+static int __init mimc200_flash_init(void)
-+{
-+ int ret;
-+
-+ smc_set_timing(&flash_config, &flash_timing);
-+ ret = smc_set_configuration(0, &flash_config);
-+ if (ret < 0) {
-+ printk(KERN_ERR "mimc200: failed to set 'System' NOR flash timing\n");
-+ return ret;
-+ }
-+ ret = smc_set_configuration(1, &flash_config);
-+ if (ret < 0) {
-+ printk(KERN_ERR "mimc200: failed to set 'Data' NOR flash timing\n");
-+ return ret;
-+ }
-+
-+ platform_device_register(&flash_device_system);
-+ platform_device_register(&flash_device_data);
-+
-+ return 0;
-+}
-+device_initcall(mimc200_flash_init);
-diff --git a/arch/avr32/boards/mimc200/fram.c b/arch/avr32/boards/mimc200/fram.c
-new file mode 100644
-index 0000000..54fbd95
---- /dev/null
-+++ b/arch/avr32/boards/mimc200/fram.c
-@@ -0,0 +1,80 @@
-+/*
-+ * FRAM driver for MIMC200 board
-+ *
-+ * Copyright 2008 Mark Jackson <mpfj@mimc.co.uk>
-+ *
-+ * This module adds *very* simply support for the system's FRAM device.
-+ * At the moment, this is hard-coded to the MIMC200 platform, and only
-+ * supports mmap().
-+ */
-+
-+#define FRAM_VERSION "1.0"
-+
-+#include <linux/miscdevice.h>
-+#include <linux/proc_fs.h>
-+#include <linux/mm.h>
-+#include <linux/io.h>
-+
-+#define FRAM_BASE 0xac000000
-+#define FRAM_SIZE 0x20000
-+
-+/*
-+ * The are the file operation function for user access to /dev/fram
-+ */
-+
-+static int fram_mmap(struct file *filp, struct vm_area_struct *vma)
-+{
-+ int ret;
-+
-+ ret = remap_pfn_range(vma,
-+ vma->vm_start,
-+ virt_to_phys((void *)((unsigned long)FRAM_BASE)) >> PAGE_SHIFT,
-+ vma->vm_end-vma->vm_start,
-+ PAGE_SHARED);
-+
-+ if (ret != 0)
-+ return -EAGAIN;
-+
-+ return 0;
-+}
-+
-+static const struct file_operations fram_fops = {
-+ .owner = THIS_MODULE,
-+ .mmap = fram_mmap,
-+};
-+
-+#define FRAM_MINOR 0
-+
-+static struct miscdevice fram_dev = {
-+ FRAM_MINOR,
-+ "fram",
-+ &fram_fops
-+};
-+
-+static int __init
-+fram_init(void)
-+{
-+ int ret;
-+
-+ ret = misc_register(&fram_dev);
-+ if (ret) {
-+ printk(KERN_ERR "fram: can't misc_register on minor=%d\n",
-+ FRAM_MINOR);
-+ return ret;
-+ }
-+ printk(KERN_INFO "FRAM memory driver v" FRAM_VERSION "\n");
-+ return 0;
-+}
-+
-+static void __exit
-+fram_cleanup_module(void)
-+{
-+ misc_deregister(&fram_dev);
-+}
-+
-+module_init(fram_init);
-+module_exit(fram_cleanup_module);
-+
-+MODULE_LICENSE("GPL");
-+
-+MODULE_ALIAS_MISCDEV(FRAM_MINOR);
-diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c
-new file mode 100644
-index 0000000..c060d4d
---- /dev/null
-+++ b/arch/avr32/boards/mimc200/setup.c
-@@ -0,0 +1,235 @@
-+/*
-+ * Board-specific setup code for the MIMC200
-+ *
-+ * Copyright (C) 2008 Mercury IMC Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+extern struct atmel_lcdfb_info mimc200_lcdc_data;
-+
-+#include <linux/clk.h>
-+#include <linux/etherdevice.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/init.h>
-+#include <linux/linkage.h>
-+#include <linux/platform_device.h>
-+#include <linux/types.h>
-+#include <linux/leds.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/eeprom.h>
-+
-+#include <video/atmel_lcdc.h>
-+#include <linux/fb.h>
-+
-+#include <asm/atmel-mci.h>
-+#include <linux/io.h>
-+#include <asm/setup.h>
-+
-+#include <mach/at32ap700x.h>
-+#include <mach/board.h>
-+#include <mach/init.h>
-+#include <mach/portmux.h>
-+
-+/* Oscillator frequencies. These are board-specific */
-+unsigned long at32_board_osc_rates[3] = {
-+ [0] = 32768, /* 32.768 kHz on RTC osc */
-+ [1] = 10000000, /* 10 MHz on osc0 */
-+ [2] = 12000000, /* 12 MHz on osc1 */
-+};
-+
-+/* Initialized by bootloader-specific startup code. */
-+struct tag *bootloader_tags __initdata;
-+
-+static struct fb_videomode __initdata tx14d14_modes[] = {
-+ {
-+ .name = "640x480 @ 60",
-+ .refresh = 60,
-+ .xres = 640, .yres = 480,
-+ .pixclock = KHZ2PICOS(11666),
-+
-+ .left_margin = 80, .right_margin = 1,
-+ .upper_margin = 13, .lower_margin = 2,
-+ .hsync_len = 64, .vsync_len = 1,
-+
-+ .sync = 0,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
-+
-+static struct fb_monspecs __initdata mimc200_default_monspecs = {
-+ .manufacturer = "HIT",
-+ .monitor = "TX14D14VM1BAB",
-+ .modedb = tx14d14_modes,
-+ .modedb_len = ARRAY_SIZE(tx14d14_modes),
-+ .hfmin = 14820,
-+ .hfmax = 22230,
-+ .vfmin = 60,
-+ .vfmax = 73.3,
-+ .dclkmax = 25200000,
-+};
-+
-+struct atmel_lcdfb_info __initdata mimc200_lcdc_data = {
-+ .default_bpp = 16,
-+ .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-+ .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
-+ | ATMEL_LCDC_INVCLK
-+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-+ | ATMEL_LCDC_MEMOR_BIG),
-+ .default_monspecs = &mimc200_default_monspecs,
-+ .guard_time = 2,
-+};
-+
-+struct eth_addr {
-+ u8 addr[6];
-+};
-+static struct eth_addr __initdata hw_addr[2];
-+static struct eth_platform_data __initdata eth_data[2];
-+
-+static struct spi_eeprom eeprom_25lc010 = {
-+ .name = "25lc010",
-+ .byte_len = 128,
-+ .page_size = 16,
-+ .flags = EE_ADDR1,
-+};
-+
-+static struct spi_board_info spi0_board_info[] __initdata = {
-+ {
-+ .modalias = "rtc-ds1390",
-+ .max_speed_hz = 4000000,
-+ .chip_select = 2,
-+ },
-+ {
-+ .modalias = "at25",
-+ .max_speed_hz = 1000000,
-+ .chip_select = 1,
-+ .mode = SPI_MODE_3,
-+ .platform_data = &eeprom_25lc010,
-+ },
-+};
-+
-+static struct mci_platform_data __initdata mci0_data = {
-+ .slot[0] = {
-+ .bus_width = 4,
-+ .detect_pin = GPIO_PIN_PA(26),
-+ .wp_pin = GPIO_PIN_PA(27),
-+ },
-+};
-+
-+/*
-+ * The next two functions should go away as the boot loader is
-+ * supposed to initialize the macb address registers with a valid
-+ * ethernet address. But we need to keep it around for a while until
-+ * we can be reasonably sure the boot loader does this.
-+ *
-+ * The phy_id is ignored as the driver will probe for it.
-+ */
-+static int __init parse_tag_ethernet(struct tag *tag)
-+{
-+ int i;
-+
-+ i = tag->u.ethernet.mac_index;
-+ if (i < ARRAY_SIZE(hw_addr))
-+ memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
-+ sizeof(hw_addr[i].addr));
-+
-+ return 0;
-+}
-+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
-+
-+static void __init set_hw_addr(struct platform_device *pdev)
-+{
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ const u8 *addr;
-+ void __iomem *regs;
-+ struct clk *pclk;
-+
-+ if (!res)
-+ return;
-+ if (pdev->id >= ARRAY_SIZE(hw_addr))
-+ return;
-+
-+ addr = hw_addr[pdev->id].addr;
-+ if (!is_valid_ether_addr(addr))
-+ return;
-+
-+ /*
-+ * Since this is board-specific code, we'll cheat and use the
-+ * physical address directly as we happen to know that it's
-+ * the same as the virtual address.
-+ */
-+ regs = (void __iomem __force *)res->start;
-+ pclk = clk_get(&pdev->dev, "pclk");
-+ if (!pclk)
-+ return;
-+
-+ clk_enable(pclk);
-+ __raw_writel((addr[3] << 24) | (addr[2] << 16)
-+ | (addr[1] << 8) | addr[0], regs + 0x98);
-+ __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
-+ clk_disable(pclk);
-+ clk_put(pclk);
-+}
-+
-+void __init setup_board(void)
-+{
-+ at32_map_usart(0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */
-+ at32_map_usart(1, 1); /* USART 1: /dev/ttyS1 (RS232) */
-+ at32_map_usart(2, 2); /* USART 2: /dev/ttyS2 (RS485) */
-+ at32_map_usart(3, 3); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */
-+}
-+
-+static struct i2c_gpio_platform_data i2c_gpio_data = {
-+ .sda_pin = GPIO_PIN_PA(6),
-+ .scl_pin = GPIO_PIN_PA(7),
-+ .sda_is_open_drain = 1,
-+ .scl_is_open_drain = 1,
-+ .udelay = 2, /* close to 100 kHz */
-+};
-+
-+static struct platform_device i2c_gpio_device = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &i2c_gpio_data,
-+ },
-+};
-+
-+static struct i2c_board_info __initdata i2c_info[] = {
-+};
-+
-+static int __init mimc200_init(void)
-+{
-+ /*
-+ * MIMC200 uses 16-bit SDRAM interface, so we don't need to
-+ * reserve any pins for it.
-+ */
-+
-+ at32_add_device_usart(0);
-+ at32_add_device_usart(1);
-+ at32_add_device_usart(2);
-+ at32_add_device_usart(3);
-+
-+ set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
-+ set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
-+
-+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-+ at32_add_device_mci(0, &mci0_data);
-+ at32_add_device_usba(0, NULL);
-+
-+ at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP);
-+ at32_select_gpio(i2c_gpio_data.sda_pin,
-+ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-+ at32_select_gpio(i2c_gpio_data.scl_pin,
-+ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-+ platform_device_register(&i2c_gpio_device);
-+ i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
-+
-+ at32_add_device_lcdc(0, &mimc200_lcdc_data,
-+ fbmem_start, fbmem_size, 1);
-+
-+ return 0;
-+}
-+postcore_initcall(mimc200_init);
-diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
-index 5415209..58fe9f3 100644
---- a/arch/avr32/configs/atngw100_defconfig
-+++ b/arch/avr32/configs/atngw100_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.27-rc1
--# Tue Aug 5 16:00:47 2008
-+# Linux kernel version: 2.6.27.4
-+# Thu Nov 13 14:33:33 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -130,11 +130,15 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
- CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PORTMUX_PIO=y
- CONFIG_PLATFORM_AT32AP=y
- CONFIG_CPU_AT32AP700X=y
- CONFIG_CPU_AT32AP7000=y
- # CONFIG_BOARD_ATSTK1000 is not set
- CONFIG_BOARD_ATNGW100=y
-+# CONFIG_BOARD_FAVR_32 is not set
-+# CONFIG_BOARD_MIMC200 is not set
-+# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
- CONFIG_LOADER_U_BOOT=y
-
- #
-@@ -177,7 +181,7 @@ CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
- # CONFIG_HZ_1000 is not set
- CONFIG_HZ=250
--# CONFIG_SCHED_HRTICK is not set
-+CONFIG_SCHED_HRTICK=y
- CONFIG_CMDLINE=""
-
- #
-@@ -615,6 +619,7 @@ CONFIG_UNIX98_PTYS=y
- CONFIG_I2C=m
- CONFIG_I2C_BOARDINFO=y
- CONFIG_I2C_CHARDEV=m
-+CONFIG_I2C_HELPER_AUTO=y
- CONFIG_I2C_ALGOBIT=m
-
- #
-@@ -664,6 +669,7 @@ CONFIG_SPI_MASTER=y
- #
- # SPI Master Controller Drivers
- #
-+CONFIG_SPI_ATMEL_HAVE_PDC=y
- CONFIG_SPI_ATMEL=y
- # CONFIG_SPI_BITBANG is not set
-
-@@ -706,7 +712,7 @@ CONFIG_WATCHDOG=y
- # Watchdog Device Drivers
- #
- # CONFIG_SOFT_WATCHDOG is not set
--CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32_WDT=y
-
- #
- # Sonics Silicon Backplane
-@@ -720,6 +726,7 @@ CONFIG_SSB_POSSIBLE=y
- # CONFIG_MFD_CORE is not set
- # CONFIG_MFD_SM501 is not set
- # CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-
- #
- # Multimedia devices
-@@ -751,11 +758,14 @@ CONFIG_SSB_POSSIBLE=y
- # CONFIG_DISPLAY_SUPPORT is not set
- # CONFIG_SOUND is not set
- CONFIG_USB_SUPPORT=y
--# CONFIG_USB_ARCH_HAS_HCD is not set
--# CONFIG_USB_ARCH_HAS_OHCI is not set
--# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+# CONFIG_USB is not set
- # CONFIG_USB_OTG_WHITELIST is not set
- # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+# CONFIG_USB_MUSB_HDRC is not set
-+# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-@@ -806,6 +816,7 @@ CONFIG_MMC_TEST=m
- #
- # CONFIG_MMC_SDHCI is not set
- CONFIG_MMC_ATMELMCI=y
-+# CONFIG_MMC_ATMELMCI_DMA is not set
- CONFIG_MMC_SPI=m
- # CONFIG_MEMSTICK is not set
- CONFIG_NEW_LEDS=y
-@@ -880,11 +891,13 @@ CONFIG_RTC_INTF_DEV=y
- # on-CPU RTC drivers
- #
- CONFIG_RTC_DRV_AT32AP700X=y
-+# CONFIG_RTC_DRV_AVR32_AST is not set
- CONFIG_DMADEVICES=y
-
- #
- # DMA Devices
- #
-+# CONFIG_ATMEL_PDCA is not set
- CONFIG_DW_DMAC=y
- CONFIG_DMA_ENGINE=y
-
-@@ -898,13 +911,13 @@ CONFIG_DMATEST=m
- #
- # File systems
- #
--CONFIG_EXT2_FS=m
-+CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
--CONFIG_EXT3_FS=m
-+CONFIG_EXT3_FS=y
- # CONFIG_EXT3_FS_XATTR is not set
- # CONFIG_EXT4DEV_FS is not set
--CONFIG_JBD=m
-+CONFIG_JBD=y
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
- # CONFIG_FS_POSIX_ACL is not set
-@@ -944,7 +957,7 @@ CONFIG_SYSFS=y
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--CONFIG_CONFIGFS_FS=m
-+CONFIG_CONFIGFS_FS=y
-
- #
- # Miscellaneous filesystems
-diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig
-new file mode 100644
-index 0000000..24f57fa
---- /dev/null
-+++ b/arch/avr32/configs/atngw100_evklcd100_defconfig
-@@ -0,0 +1,1323 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.27.4
-+# Thu Nov 13 14:10:50 2008
-+#
-+CONFIG_AVR32=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_GENERIC_BUG=y
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
-+CONFIG_BSD_PROCESS_ACCT=y
-+CONFIG_BSD_PROCESS_ACCT_V3=y
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+# CONFIG_GROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
-+# CONFIG_NAMESPACES is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+# CONFIG_SYSCTL_SYSCALL is not set
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+# CONFIG_COMPAT_BRK is not set
-+# CONFIG_BASE_FULL is not set
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLUB_DEBUG=y
-+# CONFIG_SLAB is not set
-+CONFIG_SLUB=y
-+# CONFIG_SLOB is not set
-+CONFIG_PROFILING=y
-+# CONFIG_MARKERS is not set
-+CONFIG_OPROFILE=m
-+CONFIG_HAVE_OPROFILE=y
-+CONFIG_KPROBES=y
-+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-+# CONFIG_HAVE_IOREMAP_PROT is not set
-+CONFIG_HAVE_KPROBES=y
-+# CONFIG_HAVE_KRETPROBES is not set
-+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-+# CONFIG_HAVE_DMA_ATTRS is not set
-+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-+CONFIG_HAVE_CLK=y
-+CONFIG_PROC_PAGE_MONITOR=y
-+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=1
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_KMOD=y
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_BLK_DEV_INTEGRITY is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+# CONFIG_IOSCHED_AS is not set
-+# CONFIG_IOSCHED_DEADLINE is not set
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
-+
-+#
-+# System Type and features
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+CONFIG_SUBARCH_AVR32B=y
-+CONFIG_MMU=y
-+CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PORTMUX_PIO=y
-+CONFIG_PLATFORM_AT32AP=y
-+CONFIG_CPU_AT32AP700X=y
-+CONFIG_CPU_AT32AP7000=y
-+# CONFIG_BOARD_ATSTK1000 is not set
-+CONFIG_BOARD_ATNGW100=y
-+# CONFIG_BOARD_FAVR_32 is not set
-+# CONFIG_BOARD_MIMC200 is not set
-+CONFIG_BOARD_ATNGW100_EVKLCD10X=y
-+CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA=y
-+# CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA is not set
-+# CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA is not set
-+CONFIG_LOADER_U_BOOT=y
-+
-+#
-+# Atmel AVR32 AP options
-+#
-+# CONFIG_AP700X_32_BIT_SMC is not set
-+CONFIG_AP700X_16_BIT_SMC=y
-+# CONFIG_AP700X_8_BIT_SMC is not set
-+CONFIG_LOAD_ADDRESS=0x10000000
-+CONFIG_ENTRY_ADDRESS=0x90000000
-+CONFIG_PHYS_OFFSET=0x10000000
-+CONFIG_PREEMPT_NONE=y
-+# CONFIG_PREEMPT_VOLUNTARY is not set
-+# CONFIG_PREEMPT is not set
-+CONFIG_QUICKLIST=y
-+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-+CONFIG_ARCH_FLATMEM_ENABLE=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=0
-+CONFIG_NR_QUICK=2
-+CONFIG_VIRT_TO_BUS=y
-+# CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_NMI_DEBUGGING=y
-+# CONFIG_HZ_100 is not set
-+CONFIG_HZ_250=y
-+# CONFIG_HZ_300 is not set
-+# CONFIG_HZ_1000 is not set
-+CONFIG_HZ=250
-+CONFIG_SCHED_HRTICK=y
-+CONFIG_CMDLINE=""
-+
-+#
-+# Power management options
-+#
-+CONFIG_PM=y
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+
-+#
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+# CONFIG_CPU_FREQ_STAT is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-+
-+#
-+# Bus options
-+#
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Executable file formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_MISC is not set
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+CONFIG_XFRM_USER=y
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_XFRM_IPCOMP=y
-+CONFIG_NET_KEY=y
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+# CONFIG_IP_MULTIPLE_TABLES is not set
-+# CONFIG_IP_ROUTE_MULTIPATH is not set
-+# CONFIG_IP_ROUTE_VERBOSE is not set
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+CONFIG_IP_MROUTE=y
-+CONFIG_IP_PIMSM_V1=y
-+# CONFIG_IP_PIMSM_V2 is not set
-+# CONFIG_ARPD is not set
-+CONFIG_SYN_COOKIES=y
-+CONFIG_INET_AH=y
-+CONFIG_INET_ESP=y
-+CONFIG_INET_IPCOMP=y
-+CONFIG_INET_XFRM_TUNNEL=y
-+CONFIG_INET_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IP_VS is not set
-+CONFIG_IPV6=y
-+# CONFIG_IPV6_PRIVACY is not set
-+# CONFIG_IPV6_ROUTER_PREF is not set
-+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-+CONFIG_INET6_AH=y
-+CONFIG_INET6_ESP=y
-+CONFIG_INET6_IPCOMP=y
-+# CONFIG_IPV6_MIP6 is not set
-+CONFIG_INET6_XFRM_TUNNEL=y
-+CONFIG_INET6_TUNNEL=y
-+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET6_XFRM_MODE_TUNNEL=y
-+CONFIG_INET6_XFRM_MODE_BEET=y
-+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-+CONFIG_IPV6_SIT=y
-+CONFIG_IPV6_NDISC_NODETYPE=y
-+# CONFIG_IPV6_TUNNEL is not set
-+# CONFIG_IPV6_MULTIPLE_TABLES is not set
-+# CONFIG_IPV6_MROUTE is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+CONFIG_NETFILTER=y
-+# CONFIG_NETFILTER_DEBUG is not set
-+# CONFIG_NETFILTER_ADVANCED is not set
-+
-+#
-+# Core Netfilter Configuration
-+#
-+CONFIG_NETFILTER_NETLINK=m
-+CONFIG_NETFILTER_NETLINK_LOG=m
-+CONFIG_NF_CONNTRACK=m
-+CONFIG_NF_CONNTRACK_FTP=m
-+CONFIG_NF_CONNTRACK_IRC=m
-+CONFIG_NF_CONNTRACK_SIP=m
-+CONFIG_NF_CT_NETLINK=m
-+CONFIG_NETFILTER_XTABLES=y
-+CONFIG_NETFILTER_XT_TARGET_MARK=m
-+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-+CONFIG_NETFILTER_XT_MATCH_MARK=m
-+CONFIG_NETFILTER_XT_MATCH_POLICY=m
-+CONFIG_NETFILTER_XT_MATCH_STATE=m
-+
-+#
-+# IP: Netfilter Configuration
-+#
-+CONFIG_NF_CONNTRACK_IPV4=m
-+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-+CONFIG_IP_NF_IPTABLES=m
-+CONFIG_IP_NF_FILTER=m
-+CONFIG_IP_NF_TARGET_REJECT=m
-+CONFIG_IP_NF_TARGET_LOG=m
-+# CONFIG_IP_NF_TARGET_ULOG is not set
-+CONFIG_NF_NAT=m
-+CONFIG_NF_NAT_NEEDED=y
-+CONFIG_IP_NF_TARGET_MASQUERADE=m
-+CONFIG_NF_NAT_FTP=m
-+CONFIG_NF_NAT_IRC=m
-+# CONFIG_NF_NAT_TFTP is not set
-+# CONFIG_NF_NAT_AMANDA is not set
-+# CONFIG_NF_NAT_PPTP is not set
-+# CONFIG_NF_NAT_H323 is not set
-+CONFIG_NF_NAT_SIP=m
-+CONFIG_IP_NF_MANGLE=m
-+
-+#
-+# IPv6: Netfilter Configuration
-+#
-+CONFIG_NF_CONNTRACK_IPV6=m
-+CONFIG_IP6_NF_IPTABLES=m
-+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-+CONFIG_IP6_NF_FILTER=m
-+CONFIG_IP6_NF_TARGET_LOG=m
-+CONFIG_IP6_NF_TARGET_REJECT=m
-+CONFIG_IP6_NF_MANGLE=m
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+CONFIG_STP=m
-+CONFIG_BRIDGE=m
-+CONFIG_VLAN_8021Q=m
-+# CONFIG_VLAN_8021Q_GVRP is not set
-+# CONFIG_DECNET is not set
-+CONFIG_LLC=m
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_NET_TCPPROBE is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+CONFIG_STANDALONE=y
-+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_CFI_INTELEXT is not set
-+CONFIG_MTD_CFI_AMDSTD=y
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x80000000
-+CONFIG_MTD_PHYSMAP_LEN=0x0
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+CONFIG_MTD_DATAFLASH=y
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+# CONFIG_MTD_NAND is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+CONFIG_MTD_UBI=y
-+CONFIG_MTD_UBI_WL_THRESHOLD=4096
-+CONFIG_MTD_UBI_BEB_RESERVE=1
-+# CONFIG_MTD_UBI_GLUEBI is not set
-+
-+#
-+# UBI debugging options
-+#
-+# CONFIG_MTD_UBI_DEBUG is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=m
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+CONFIG_BLK_DEV_NBD=m
-+CONFIG_BLK_DEV_RAM=m
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=4096
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_ATMEL_PWM is not set
-+CONFIG_ATMEL_TCLIB=y
-+CONFIG_ATMEL_TCB_CLKSRC=y
-+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-+# CONFIG_EEPROM_93CX6 is not set
-+# CONFIG_ATMEL_SSC is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_HAVE_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+# CONFIG_SCSI is not set
-+# CONFIG_SCSI_DMA is not set
-+# CONFIG_SCSI_NETLINK is not set
-+# CONFIG_ATA is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+# CONFIG_MII is not set
-+CONFIG_MACB=y
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+# CONFIG_WAN is not set
-+CONFIG_PPP=m
-+# CONFIG_PPP_MULTILINK is not set
-+CONFIG_PPP_FILTER=y
-+CONFIG_PPP_ASYNC=m
-+# CONFIG_PPP_SYNC_TTY is not set
-+CONFIG_PPP_DEFLATE=m
-+CONFIG_PPP_BSDCOMP=m
-+CONFIG_PPP_MPPE=m
-+CONFIG_PPPOE=m
-+# CONFIG_PPPOL2TP is not set
-+# CONFIG_SLIP is not set
-+CONFIG_SLHC=m
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+# CONFIG_INPUT_MOUSEDEV is not set
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=m
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+# CONFIG_INPUT_KEYBOARD is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+CONFIG_INPUT_TOUCHSCREEN=y
-+# CONFIG_TOUCHSCREEN_ADS7846 is not set
-+# CONFIG_TOUCHSCREEN_FUJITSU is not set
-+# CONFIG_TOUCHSCREEN_GUNZE is not set
-+# CONFIG_TOUCHSCREEN_ELO is not set
-+# CONFIG_TOUCHSCREEN_MTOUCH is not set
-+# CONFIG_TOUCHSCREEN_INEXIO is not set
-+# CONFIG_TOUCHSCREEN_MK712 is not set
-+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-+# CONFIG_TOUCHSCREEN_UCB1400 is not set
-+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+CONFIG_SERIAL_ATMEL_PDC=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
-+CONFIG_I2C_HELPER_AUTO=y
-+CONFIG_I2C_ALGOBIT=m
-+
-+#
-+# I2C Hardware Bus support
-+#
-+
-+#
-+# I2C system bus drivers (mostly embedded / system-on-chip)
-+#
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_SIMTEC is not set
-+
-+#
-+# External I2C/SMBus adapter drivers
-+#
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+
-+#
-+# Other I2C/SMBus bus drivers
-+#
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_AT24 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL_HAVE_PDC=y
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+CONFIG_SPI_SPIDEV=m
-+# CONFIG_SPI_TLE62X0 is not set
-+CONFIG_ARCH_REQUIRE_GPIOLIB=y
-+CONFIG_GPIOLIB=y
-+# CONFIG_DEBUG_GPIO is not set
-+# CONFIG_GPIO_SYSFS is not set
-+
-+#
-+# I2C GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX732X is not set
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-+
-+#
-+# PCI GPIO expanders:
-+#
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX7301 is not set
-+# CONFIG_GPIO_MCP23S08 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+# CONFIG_THERMAL_HWMON is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32_WDT=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_CORE is not set
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-+
-+#
-+# Multimedia devices
-+#
-+
-+#
-+# Multimedia core support
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_VIDEO_MEDIA is not set
-+
-+#
-+# Multimedia drivers
-+#
-+# CONFIG_DAB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_FOREIGN_ENDIAN is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_ATMEL=y
-+# CONFIG_FB_ATMEL_MPOP is not set
-+# CONFIG_FB_VIRTUAL is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE is not set
-+# CONFIG_LOGO is not set
-+CONFIG_SOUND=y
-+CONFIG_SND=y
-+CONFIG_SND_TIMER=m
-+CONFIG_SND_PCM=m
-+# CONFIG_SND_SEQUENCER is not set
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+CONFIG_SND_VERBOSE_PROCFS=y
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+CONFIG_SND_DRIVERS=y
-+# CONFIG_SND_DUMMY is not set
-+# CONFIG_SND_MTPAV is not set
-+# CONFIG_SND_SERIAL_U16550 is not set
-+# CONFIG_SND_MPU401 is not set
-+CONFIG_SND_SPI=y
-+# CONFIG_SND_SOC is not set
-+# CONFIG_SOUND_PRIME is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+# CONFIG_HIDRAW is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+# CONFIG_USB is not set
-+# CONFIG_USB_OTG_WHITELIST is not set
-+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+# CONFIG_USB_MUSB_HDRC is not set
-+# CONFIG_USB_GADGET_MUSB_HDRC is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG is not set
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA25X is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_PXA27X is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_USB_G_PRINTER is not set
-+# CONFIG_USB_CDC_COMPOSITE is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-+# CONFIG_MMC_TEST is not set
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+# CONFIG_MMC_SDHCI is not set
-+CONFIG_MMC_ATMELMCI=y
-+# CONFIG_MMC_SPI is not set
-+# CONFIG_MEMSTICK is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-+
-+#
-+# LED drivers
-+#
-+# CONFIG_LEDS_PCA9532 is not set
-+CONFIG_LEDS_GPIO=y
-+# CONFIG_LEDS_PCA955X is not set
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-+# CONFIG_ACCESSIBILITY is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-+# CONFIG_RTC_DRV_FM3130 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_M41T94 is not set
-+# CONFIG_RTC_DRV_DS1305 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1511 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT32AP700X=y
-+# CONFIG_RTC_DRV_AVR32_AST is not set
-+# CONFIG_DMADEVICES is not set
-+# CONFIG_UIO is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_DNOTIFY is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+CONFIG_FUSE_FS=m
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=m
-+CONFIG_MSDOS_FS=m
-+CONFIG_VFAT_FS=m
-+CONFIG_FAT_DEFAULT_CODEPAGE=850
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+# CONFIG_PROC_KCORE is not set
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_CONFIGFS_FS=y
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+CONFIG_UBIFS_FS=y
-+# CONFIG_UBIFS_FS_XATTR is not set
-+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-+CONFIG_UBIFS_FS_LZO=y
-+CONFIG_UBIFS_FS_ZLIB=y
-+# CONFIG_UBIFS_FS_DEBUG is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_OMFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_NFSD=m
-+CONFIG_NFSD_V3=y
-+# CONFIG_NFSD_V3_ACL is not set
-+# CONFIG_NFSD_V4 is not set
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_EXPORTFS=m
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+CONFIG_SMB_FS=m
-+# CONFIG_SMB_NLS_DEFAULT is not set
-+CONFIG_CIFS=m
-+# CONFIG_CIFS_STATS is not set
-+# CONFIG_CIFS_WEAK_PW_HASH is not set
-+# CONFIG_CIFS_XATTR is not set
-+# CONFIG_CIFS_DEBUG2 is not set
-+# CONFIG_CIFS_EXPERIMENTAL is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+CONFIG_NLS=m
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=m
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+CONFIG_NLS_CODEPAGE_850=m
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=m
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=m
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_FRAME_WARN=1024
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_OBJECTS is not set
-+# CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_SLUB_STATS is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_WRITECOUNT is not set
-+# CONFIG_DEBUG_MEMORY_INIT is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_KPROBES_SANITY_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
-+# CONFIG_LKDTM is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_AEAD=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_MANAGER=y
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_AUTHENC=y
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=y
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+CONFIG_CRYPTO_ECB=m
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+CONFIG_CRYPTO_HMAC=y
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+CONFIG_CRYPTO_SHA1=y
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+CONFIG_CRYPTO_ARC4=m
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+CONFIG_CRYPTO_DEFLATE=y
-+CONFIG_CRYPTO_LZO=y
-+CONFIG_CRYPTO_HW=y
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-+CONFIG_CRC_CCITT=m
-+CONFIG_CRC16=y
-+# CONFIG_CRC_T10DIF is not set
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_LZO_COMPRESS=y
-+CONFIG_LZO_DECOMPRESS=y
-+CONFIG_GENERIC_ALLOCATOR=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig
-new file mode 100644
-index 0000000..253b4b9
---- /dev/null
-+++ b/arch/avr32/configs/atngw100_evklcd101_defconfig
-@@ -0,0 +1,1323 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.27.4
-+# Thu Nov 13 14:11:19 2008
-+#
-+CONFIG_AVR32=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_GENERIC_BUG=y
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
-+CONFIG_BSD_PROCESS_ACCT=y
-+CONFIG_BSD_PROCESS_ACCT_V3=y
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+# CONFIG_GROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
-+# CONFIG_NAMESPACES is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+# CONFIG_SYSCTL_SYSCALL is not set
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+# CONFIG_COMPAT_BRK is not set
-+# CONFIG_BASE_FULL is not set
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLUB_DEBUG=y
-+# CONFIG_SLAB is not set
-+CONFIG_SLUB=y
-+# CONFIG_SLOB is not set
-+CONFIG_PROFILING=y
-+# CONFIG_MARKERS is not set
-+CONFIG_OPROFILE=m
-+CONFIG_HAVE_OPROFILE=y
-+CONFIG_KPROBES=y
-+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-+# CONFIG_HAVE_IOREMAP_PROT is not set
-+CONFIG_HAVE_KPROBES=y
-+# CONFIG_HAVE_KRETPROBES is not set
-+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-+# CONFIG_HAVE_DMA_ATTRS is not set
-+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-+CONFIG_HAVE_CLK=y
-+CONFIG_PROC_PAGE_MONITOR=y
-+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=1
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_KMOD=y
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_BLK_DEV_INTEGRITY is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+# CONFIG_IOSCHED_AS is not set
-+# CONFIG_IOSCHED_DEADLINE is not set
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
-+
-+#
-+# System Type and features
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+CONFIG_SUBARCH_AVR32B=y
-+CONFIG_MMU=y
-+CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PORTMUX_PIO=y
-+CONFIG_PLATFORM_AT32AP=y
-+CONFIG_CPU_AT32AP700X=y
-+CONFIG_CPU_AT32AP7000=y
-+# CONFIG_BOARD_ATSTK1000 is not set
-+CONFIG_BOARD_ATNGW100=y
-+# CONFIG_BOARD_FAVR_32 is not set
-+# CONFIG_BOARD_MIMC200 is not set
-+CONFIG_BOARD_ATNGW100_EVKLCD10X=y
-+# CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA is not set
-+CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA=y
-+# CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA is not set
-+CONFIG_LOADER_U_BOOT=y
-+
-+#
-+# Atmel AVR32 AP options
-+#
-+# CONFIG_AP700X_32_BIT_SMC is not set
-+CONFIG_AP700X_16_BIT_SMC=y
-+# CONFIG_AP700X_8_BIT_SMC is not set
-+CONFIG_LOAD_ADDRESS=0x10000000
-+CONFIG_ENTRY_ADDRESS=0x90000000
-+CONFIG_PHYS_OFFSET=0x10000000
-+CONFIG_PREEMPT_NONE=y
-+# CONFIG_PREEMPT_VOLUNTARY is not set
-+# CONFIG_PREEMPT is not set
-+CONFIG_QUICKLIST=y
-+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-+CONFIG_ARCH_FLATMEM_ENABLE=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=0
-+CONFIG_NR_QUICK=2
-+CONFIG_VIRT_TO_BUS=y
-+# CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_NMI_DEBUGGING=y
-+# CONFIG_HZ_100 is not set
-+CONFIG_HZ_250=y
-+# CONFIG_HZ_300 is not set
-+# CONFIG_HZ_1000 is not set
-+CONFIG_HZ=250
-+CONFIG_SCHED_HRTICK=y
-+CONFIG_CMDLINE=""
-+
-+#
-+# Power management options
-+#
-+CONFIG_PM=y
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+
-+#
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+# CONFIG_CPU_FREQ_STAT is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-+
-+#
-+# Bus options
-+#
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Executable file formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_MISC is not set
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+CONFIG_XFRM_USER=y
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_XFRM_IPCOMP=y
-+CONFIG_NET_KEY=y
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+# CONFIG_IP_MULTIPLE_TABLES is not set
-+# CONFIG_IP_ROUTE_MULTIPATH is not set
-+# CONFIG_IP_ROUTE_VERBOSE is not set
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+CONFIG_IP_MROUTE=y
-+CONFIG_IP_PIMSM_V1=y
-+# CONFIG_IP_PIMSM_V2 is not set
-+# CONFIG_ARPD is not set
-+CONFIG_SYN_COOKIES=y
-+CONFIG_INET_AH=y
-+CONFIG_INET_ESP=y
-+CONFIG_INET_IPCOMP=y
-+CONFIG_INET_XFRM_TUNNEL=y
-+CONFIG_INET_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IP_VS is not set
-+CONFIG_IPV6=y
-+# CONFIG_IPV6_PRIVACY is not set
-+# CONFIG_IPV6_ROUTER_PREF is not set
-+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-+CONFIG_INET6_AH=y
-+CONFIG_INET6_ESP=y
-+CONFIG_INET6_IPCOMP=y
-+# CONFIG_IPV6_MIP6 is not set
-+CONFIG_INET6_XFRM_TUNNEL=y
-+CONFIG_INET6_TUNNEL=y
-+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET6_XFRM_MODE_TUNNEL=y
-+CONFIG_INET6_XFRM_MODE_BEET=y
-+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-+CONFIG_IPV6_SIT=y
-+CONFIG_IPV6_NDISC_NODETYPE=y
-+# CONFIG_IPV6_TUNNEL is not set
-+# CONFIG_IPV6_MULTIPLE_TABLES is not set
-+# CONFIG_IPV6_MROUTE is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+CONFIG_NETFILTER=y
-+# CONFIG_NETFILTER_DEBUG is not set
-+# CONFIG_NETFILTER_ADVANCED is not set
-+
-+#
-+# Core Netfilter Configuration
-+#
-+CONFIG_NETFILTER_NETLINK=m
-+CONFIG_NETFILTER_NETLINK_LOG=m
-+CONFIG_NF_CONNTRACK=m
-+CONFIG_NF_CONNTRACK_FTP=m
-+CONFIG_NF_CONNTRACK_IRC=m
-+CONFIG_NF_CONNTRACK_SIP=m
-+CONFIG_NF_CT_NETLINK=m
-+CONFIG_NETFILTER_XTABLES=y
-+CONFIG_NETFILTER_XT_TARGET_MARK=m
-+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-+CONFIG_NETFILTER_XT_MATCH_MARK=m
-+CONFIG_NETFILTER_XT_MATCH_POLICY=m
-+CONFIG_NETFILTER_XT_MATCH_STATE=m
-+
-+#
-+# IP: Netfilter Configuration
-+#
-+CONFIG_NF_CONNTRACK_IPV4=m
-+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-+CONFIG_IP_NF_IPTABLES=m
-+CONFIG_IP_NF_FILTER=m
-+CONFIG_IP_NF_TARGET_REJECT=m
-+CONFIG_IP_NF_TARGET_LOG=m
-+# CONFIG_IP_NF_TARGET_ULOG is not set
-+CONFIG_NF_NAT=m
-+CONFIG_NF_NAT_NEEDED=y
-+CONFIG_IP_NF_TARGET_MASQUERADE=m
-+CONFIG_NF_NAT_FTP=m
-+CONFIG_NF_NAT_IRC=m
-+# CONFIG_NF_NAT_TFTP is not set
-+# CONFIG_NF_NAT_AMANDA is not set
-+# CONFIG_NF_NAT_PPTP is not set
-+# CONFIG_NF_NAT_H323 is not set
-+CONFIG_NF_NAT_SIP=m
-+CONFIG_IP_NF_MANGLE=m
-+
-+#
-+# IPv6: Netfilter Configuration
-+#
-+CONFIG_NF_CONNTRACK_IPV6=m
-+CONFIG_IP6_NF_IPTABLES=m
-+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-+CONFIG_IP6_NF_FILTER=m
-+CONFIG_IP6_NF_TARGET_LOG=m
-+CONFIG_IP6_NF_TARGET_REJECT=m
-+CONFIG_IP6_NF_MANGLE=m
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+CONFIG_STP=m
-+CONFIG_BRIDGE=m
-+CONFIG_VLAN_8021Q=m
-+# CONFIG_VLAN_8021Q_GVRP is not set
-+# CONFIG_DECNET is not set
-+CONFIG_LLC=m
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_NET_TCPPROBE is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+CONFIG_STANDALONE=y
-+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_CFI_INTELEXT is not set
-+CONFIG_MTD_CFI_AMDSTD=y
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x80000000
-+CONFIG_MTD_PHYSMAP_LEN=0x0
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+CONFIG_MTD_DATAFLASH=y
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+# CONFIG_MTD_NAND is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+CONFIG_MTD_UBI=y
-+CONFIG_MTD_UBI_WL_THRESHOLD=4096
-+CONFIG_MTD_UBI_BEB_RESERVE=1
-+# CONFIG_MTD_UBI_GLUEBI is not set
-+
-+#
-+# UBI debugging options
-+#
-+# CONFIG_MTD_UBI_DEBUG is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=m
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+CONFIG_BLK_DEV_NBD=m
-+CONFIG_BLK_DEV_RAM=m
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=4096
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_ATMEL_PWM is not set
-+CONFIG_ATMEL_TCLIB=y
-+CONFIG_ATMEL_TCB_CLKSRC=y
-+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-+# CONFIG_EEPROM_93CX6 is not set
-+# CONFIG_ATMEL_SSC is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_HAVE_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+# CONFIG_SCSI is not set
-+# CONFIG_SCSI_DMA is not set
-+# CONFIG_SCSI_NETLINK is not set
-+# CONFIG_ATA is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+# CONFIG_MII is not set
-+CONFIG_MACB=y
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+# CONFIG_WAN is not set
-+CONFIG_PPP=m
-+# CONFIG_PPP_MULTILINK is not set
-+CONFIG_PPP_FILTER=y
-+CONFIG_PPP_ASYNC=m
-+# CONFIG_PPP_SYNC_TTY is not set
-+CONFIG_PPP_DEFLATE=m
-+CONFIG_PPP_BSDCOMP=m
-+CONFIG_PPP_MPPE=m
-+CONFIG_PPPOE=m
-+# CONFIG_PPPOL2TP is not set
-+# CONFIG_SLIP is not set
-+CONFIG_SLHC=m
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+# CONFIG_INPUT_MOUSEDEV is not set
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=m
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+# CONFIG_INPUT_KEYBOARD is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+CONFIG_INPUT_TOUCHSCREEN=y
-+# CONFIG_TOUCHSCREEN_ADS7846 is not set
-+# CONFIG_TOUCHSCREEN_FUJITSU is not set
-+# CONFIG_TOUCHSCREEN_GUNZE is not set
-+# CONFIG_TOUCHSCREEN_ELO is not set
-+# CONFIG_TOUCHSCREEN_MTOUCH is not set
-+# CONFIG_TOUCHSCREEN_INEXIO is not set
-+# CONFIG_TOUCHSCREEN_MK712 is not set
-+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-+# CONFIG_TOUCHSCREEN_UCB1400 is not set
-+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+CONFIG_SERIAL_ATMEL_PDC=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
-+CONFIG_I2C_HELPER_AUTO=y
-+CONFIG_I2C_ALGOBIT=m
-+
-+#
-+# I2C Hardware Bus support
-+#
-+
-+#
-+# I2C system bus drivers (mostly embedded / system-on-chip)
-+#
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_SIMTEC is not set
-+
-+#
-+# External I2C/SMBus adapter drivers
-+#
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+
-+#
-+# Other I2C/SMBus bus drivers
-+#
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_AT24 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL_HAVE_PDC=y
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+CONFIG_SPI_SPIDEV=m
-+# CONFIG_SPI_TLE62X0 is not set
-+CONFIG_ARCH_REQUIRE_GPIOLIB=y
-+CONFIG_GPIOLIB=y
-+# CONFIG_DEBUG_GPIO is not set
-+# CONFIG_GPIO_SYSFS is not set
-+
-+#
-+# I2C GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX732X is not set
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-+
-+#
-+# PCI GPIO expanders:
-+#
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX7301 is not set
-+# CONFIG_GPIO_MCP23S08 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+# CONFIG_THERMAL_HWMON is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32_WDT=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_CORE is not set
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-+
-+#
-+# Multimedia devices
-+#
-+
-+#
-+# Multimedia core support
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_VIDEO_MEDIA is not set
-+
-+#
-+# Multimedia drivers
-+#
-+# CONFIG_DAB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_FOREIGN_ENDIAN is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_ATMEL=y
-+# CONFIG_FB_ATMEL_MPOP is not set
-+# CONFIG_FB_VIRTUAL is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE is not set
-+# CONFIG_LOGO is not set
-+CONFIG_SOUND=y
-+CONFIG_SND=y
-+CONFIG_SND_TIMER=m
-+CONFIG_SND_PCM=m
-+# CONFIG_SND_SEQUENCER is not set
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+CONFIG_SND_VERBOSE_PROCFS=y
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+CONFIG_SND_DRIVERS=y
-+# CONFIG_SND_DUMMY is not set
-+# CONFIG_SND_MTPAV is not set
-+# CONFIG_SND_SERIAL_U16550 is not set
-+# CONFIG_SND_MPU401 is not set
-+CONFIG_SND_SPI=y
-+# CONFIG_SND_SOC is not set
-+# CONFIG_SOUND_PRIME is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+# CONFIG_HIDRAW is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+# CONFIG_USB is not set
-+# CONFIG_USB_OTG_WHITELIST is not set
-+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+# CONFIG_USB_MUSB_HDRC is not set
-+# CONFIG_USB_GADGET_MUSB_HDRC is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG is not set
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA25X is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_PXA27X is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_USB_G_PRINTER is not set
-+# CONFIG_USB_CDC_COMPOSITE is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-+# CONFIG_MMC_TEST is not set
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+# CONFIG_MMC_SDHCI is not set
-+CONFIG_MMC_ATMELMCI=y
-+# CONFIG_MMC_SPI is not set
-+# CONFIG_MEMSTICK is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-+
-+#
-+# LED drivers
-+#
-+# CONFIG_LEDS_PCA9532 is not set
-+CONFIG_LEDS_GPIO=y
-+# CONFIG_LEDS_PCA955X is not set
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-+# CONFIG_ACCESSIBILITY is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-+# CONFIG_RTC_DRV_FM3130 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_M41T94 is not set
-+# CONFIG_RTC_DRV_DS1305 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1511 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT32AP700X=y
-+# CONFIG_RTC_DRV_AVR32_AST is not set
-+# CONFIG_DMADEVICES is not set
-+# CONFIG_UIO is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_DNOTIFY is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+CONFIG_FUSE_FS=m
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=m
-+CONFIG_MSDOS_FS=m
-+CONFIG_VFAT_FS=m
-+CONFIG_FAT_DEFAULT_CODEPAGE=850
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+# CONFIG_PROC_KCORE is not set
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_CONFIGFS_FS=y
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+CONFIG_UBIFS_FS=y
-+# CONFIG_UBIFS_FS_XATTR is not set
-+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-+CONFIG_UBIFS_FS_LZO=y
-+CONFIG_UBIFS_FS_ZLIB=y
-+# CONFIG_UBIFS_FS_DEBUG is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_OMFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_NFSD=m
-+CONFIG_NFSD_V3=y
-+# CONFIG_NFSD_V3_ACL is not set
-+# CONFIG_NFSD_V4 is not set
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_EXPORTFS=m
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+CONFIG_SMB_FS=m
-+# CONFIG_SMB_NLS_DEFAULT is not set
-+CONFIG_CIFS=m
-+# CONFIG_CIFS_STATS is not set
-+# CONFIG_CIFS_WEAK_PW_HASH is not set
-+# CONFIG_CIFS_XATTR is not set
-+# CONFIG_CIFS_DEBUG2 is not set
-+# CONFIG_CIFS_EXPERIMENTAL is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+CONFIG_NLS=m
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=m
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+CONFIG_NLS_CODEPAGE_850=m
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=m
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=m
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_FRAME_WARN=1024
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_OBJECTS is not set
-+# CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_SLUB_STATS is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_WRITECOUNT is not set
-+# CONFIG_DEBUG_MEMORY_INIT is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_KPROBES_SANITY_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
-+# CONFIG_LKDTM is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_AEAD=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_MANAGER=y
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_AUTHENC=y
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=y
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+CONFIG_CRYPTO_ECB=m
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+CONFIG_CRYPTO_HMAC=y
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+CONFIG_CRYPTO_SHA1=y
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+CONFIG_CRYPTO_ARC4=m
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+CONFIG_CRYPTO_DEFLATE=y
-+CONFIG_CRYPTO_LZO=y
-+CONFIG_CRYPTO_HW=y
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-+CONFIG_CRC_CCITT=m
-+CONFIG_CRC16=y
-+# CONFIG_CRC_T10DIF is not set
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_LZO_COMPRESS=y
-+CONFIG_LZO_DECOMPRESS=y
-+CONFIG_GENERIC_ALLOCATOR=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
-index 69fce6b..42829bb 100644
---- a/arch/avr32/configs/atstk1002_defconfig
-+++ b/arch/avr32/configs/atstk1002_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.27-rc1
--# Mon Aug 4 16:02:27 2008
-+# Linux kernel version: 2.6.27.4
-+# Wed Nov 12 10:28:45 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -129,20 +129,24 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
- CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PORTMUX_PIO=y
- CONFIG_PLATFORM_AT32AP=y
- CONFIG_CPU_AT32AP700X=y
- CONFIG_CPU_AT32AP7000=y
- CONFIG_BOARD_ATSTK1000=y
- # CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_FAVR_32 is not set
-+# CONFIG_BOARD_MIMC200 is not set
- CONFIG_BOARD_ATSTK1002=y
- # CONFIG_BOARD_ATSTK1003 is not set
- # CONFIG_BOARD_ATSTK1004 is not set
-+# CONFIG_BOARD_ATSTK1005 is not set
- # CONFIG_BOARD_ATSTK1006 is not set
- # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
- # CONFIG_BOARD_ATSTK100X_SPI1 is not set
--# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-+CONFIG_BOARD_ATSTK1000_J2_LED=y
- # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
--# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-+CONFIG_BOARD_ATSTK1000_J2_RGB=y
- CONFIG_BOARD_ATSTK1000_EXTDAC=y
- CONFIG_LOADER_U_BOOT=y
-
-@@ -186,7 +190,7 @@ CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
- # CONFIG_HZ_1000 is not set
- CONFIG_HZ=250
--# CONFIG_SCHED_HRTICK is not set
-+CONFIG_SCHED_HRTICK=y
- CONFIG_CMDLINE=""
-
- #
-@@ -360,7 +364,8 @@ CONFIG_MTD_CMDLINE_PARTS=y
- #
- CONFIG_MTD_CHAR=y
- CONFIG_MTD_BLKDEVS=y
--CONFIG_MTD_BLOCK=y
-+# CONFIG_MTD_BLOCK is not set
-+# CONFIG_MTD_BLOCK_RO is not set
- # CONFIG_FTL is not set
- # CONFIG_NFTL is not set
- # CONFIG_INFTL is not set
-@@ -421,12 +426,23 @@ CONFIG_M25PXX_USE_FAST_READ=y
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOC2001PLUS is not set
- # CONFIG_MTD_NAND is not set
-+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
- # CONFIG_MTD_ONENAND is not set
-
- #
- # UBI - Unsorted block images
- #
--# CONFIG_MTD_UBI is not set
-+CONFIG_MTD_UBI=y
-+CONFIG_MTD_UBI_WL_THRESHOLD=4096
-+CONFIG_MTD_UBI_BEB_RESERVE=1
-+# CONFIG_MTD_UBI_GLUEBI is not set
-+
-+#
-+# UBI debugging options
-+#
-+# CONFIG_MTD_UBI_DEBUG is not set
- # CONFIG_PARPORT is not set
- CONFIG_BLK_DEV=y
- # CONFIG_BLK_DEV_COW_COMMON is not set
-@@ -502,7 +518,7 @@ CONFIG_NETDEVICES=y
- # CONFIG_BONDING is not set
- # CONFIG_MACVLAN is not set
- # CONFIG_EQUALIZER is not set
--CONFIG_TUN=m
-+# CONFIG_TUN is not set
- # CONFIG_VETH is not set
- CONFIG_PHYLIB=y
-
-@@ -561,7 +577,7 @@ CONFIG_SLHC=m
- #
- # Input device support
- #
--CONFIG_INPUT=m
-+CONFIG_INPUT=y
- # CONFIG_INPUT_FF_MEMLESS is not set
- CONFIG_INPUT_POLLDEV=m
-
-@@ -590,6 +606,8 @@ CONFIG_KEYBOARD_GPIO=m
- CONFIG_INPUT_MOUSE=y
- # CONFIG_MOUSE_PS2 is not set
- # CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_APPLETOUCH is not set
-+# CONFIG_MOUSE_BCM5974 is not set
- # CONFIG_MOUSE_VSXXXAA is not set
- CONFIG_MOUSE_GPIO=m
- # CONFIG_INPUT_JOYSTICK is not set
-@@ -606,8 +624,12 @@ CONFIG_MOUSE_GPIO=m
- #
- # Character devices
- #
--# CONFIG_VT is not set
--# CONFIG_DEVKMEM is not set
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
- # CONFIG_SERIAL_NONSTANDARD is not set
-
- #
-@@ -634,6 +656,7 @@ CONFIG_UNIX98_PTYS=y
- CONFIG_I2C=m
- CONFIG_I2C_BOARDINFO=y
- CONFIG_I2C_CHARDEV=m
-+CONFIG_I2C_HELPER_AUTO=y
- CONFIG_I2C_ALGOBIT=m
-
- #
-@@ -663,7 +686,7 @@ CONFIG_I2C_GPIO=m
- # Miscellaneous I2C Chip support
- #
- # CONFIG_DS1682 is not set
--CONFIG_AT24=m
-+# CONFIG_AT24 is not set
- # CONFIG_SENSORS_EEPROM is not set
- # CONFIG_SENSORS_PCF8574 is not set
- # CONFIG_PCF8575 is not set
-@@ -683,6 +706,7 @@ CONFIG_SPI_MASTER=y
- #
- # SPI Master Controller Drivers
- #
-+CONFIG_SPI_ATMEL_HAVE_PDC=y
- CONFIG_SPI_ATMEL=y
- # CONFIG_SPI_BITBANG is not set
-
-@@ -725,7 +749,7 @@ CONFIG_WATCHDOG=y
- # Watchdog Device Drivers
- #
- # CONFIG_SOFT_WATCHDOG is not set
--CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32_WDT=y
-
- #
- # Sonics Silicon Backplane
-@@ -739,6 +763,7 @@ CONFIG_SSB_POSSIBLE=y
- # CONFIG_MFD_CORE is not set
- # CONFIG_MFD_SM501 is not set
- # CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-
- #
- # Multimedia devices
-@@ -784,6 +809,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
- #
- # CONFIG_FB_S1D13XXX is not set
- CONFIG_FB_ATMEL=y
-+# CONFIG_FB_ATMEL_MPOP is not set
- # CONFIG_FB_VIRTUAL is not set
- CONFIG_BACKLIGHT_LCD_SUPPORT=y
- CONFIG_LCD_CLASS_DEVICE=y
-@@ -797,6 +823,12 @@ CONFIG_LCD_LTV350QV=y
- # Display device support
- #
- # CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE is not set
- # CONFIG_LOGO is not set
- CONFIG_SOUND=m
- CONFIG_SND=m
-@@ -820,11 +852,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
- # CONFIG_SOUND_PRIME is not set
- # CONFIG_HID_SUPPORT is not set
- CONFIG_USB_SUPPORT=y
--# CONFIG_USB_ARCH_HAS_HCD is not set
--# CONFIG_USB_ARCH_HAS_OHCI is not set
--# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+# CONFIG_USB is not set
- # CONFIG_USB_OTG_WHITELIST is not set
- # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+# CONFIG_USB_MUSB_HDRC is not set
-+# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-@@ -876,6 +911,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
- #
- # CONFIG_MMC_SDHCI is not set
- CONFIG_MMC_ATMELMCI=y
-+# CONFIG_MMC_ATMELMCI_DMA is not set
- CONFIG_MMC_SPI=m
- # CONFIG_MEMSTICK is not set
- CONFIG_NEW_LEDS=y
-@@ -952,11 +988,13 @@ CONFIG_RTC_INTF_DEV=y
- # on-CPU RTC drivers
- #
- CONFIG_RTC_DRV_AT32AP700X=y
-+# CONFIG_RTC_DRV_AVR32_AST is not set
- CONFIG_DMADEVICES=y
-
- #
- # DMA Devices
- #
-+# CONFIG_ATMEL_PDCA is not set
- CONFIG_DW_DMAC=y
- CONFIG_DMA_ENGINE=y
-
-@@ -1017,7 +1055,7 @@ CONFIG_SYSFS=y
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--# CONFIG_CONFIGFS_FS is not set
-+CONFIG_CONFIGFS_FS=y
-
- #
- # Miscellaneous filesystems
-@@ -1031,7 +1069,8 @@ CONFIG_TMPFS=y
- # CONFIG_EFS_FS is not set
- CONFIG_JFFS2_FS=y
- CONFIG_JFFS2_FS_DEBUG=0
--# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
- # CONFIG_JFFS2_SUMMARY is not set
- # CONFIG_JFFS2_FS_XATTR is not set
- # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-@@ -1039,6 +1078,12 @@ CONFIG_JFFS2_ZLIB=y
- # CONFIG_JFFS2_LZO is not set
- CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
-+CONFIG_UBIFS_FS=y
-+CONFIG_UBIFS_FS_XATTR=y
-+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-+CONFIG_UBIFS_FS_LZO=y
-+CONFIG_UBIFS_FS_ZLIB=y
-+# CONFIG_UBIFS_FS_DEBUG is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_VXFS_FS is not set
- CONFIG_MINIX_FS=m
-@@ -1173,7 +1218,7 @@ CONFIG_CRYPTO=y
- #
- # Crypto core or helper
- #
--CONFIG_CRYPTO_ALGAPI=m
-+CONFIG_CRYPTO_ALGAPI=y
- CONFIG_CRYPTO_AEAD=m
- CONFIG_CRYPTO_BLKCIPHER=m
- CONFIG_CRYPTO_HASH=m
-@@ -1247,8 +1292,8 @@ CONFIG_CRYPTO_DES=m
- #
- # Compression
- #
--CONFIG_CRYPTO_DEFLATE=m
--# CONFIG_CRYPTO_LZO is not set
-+CONFIG_CRYPTO_DEFLATE=y
-+CONFIG_CRYPTO_LZO=y
- # CONFIG_CRYPTO_HW is not set
-
- #
-@@ -1258,7 +1303,7 @@ CONFIG_BITREVERSE=y
- # CONFIG_GENERIC_FIND_FIRST_BIT is not set
- # CONFIG_GENERIC_FIND_NEXT_BIT is not set
- CONFIG_CRC_CCITT=m
--# CONFIG_CRC16 is not set
-+CONFIG_CRC16=y
- CONFIG_CRC_T10DIF=m
- CONFIG_CRC_ITU_T=m
- CONFIG_CRC32=y
-@@ -1266,6 +1311,8 @@ CONFIG_CRC7=m
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
-+CONFIG_LZO_COMPRESS=y
-+CONFIG_LZO_DECOMPRESS=y
- CONFIG_GENERIC_ALLOCATOR=y
- CONFIG_PLIST=y
- CONFIG_HAS_IOMEM=y
-diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
-index 5477ed3..9eb129b 100644
---- a/arch/avr32/configs/atstk1003_defconfig
-+++ b/arch/avr32/configs/atstk1003_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.27-rc1
--# Tue Aug 5 15:34:44 2008
-+# Linux kernel version: 2.6.27.4
-+# Wed Nov 12 10:33:33 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -34,12 +34,9 @@ CONFIG_SWAP=y
- CONFIG_SYSVIPC=y
- CONFIG_SYSVIPC_SYSCTL=y
- CONFIG_POSIX_MQUEUE=y
--CONFIG_BSD_PROCESS_ACCT=y
--CONFIG_BSD_PROCESS_ACCT_V3=y
--CONFIG_TASKSTATS=y
--CONFIG_TASK_DELAY_ACCT=y
--# CONFIG_TASK_XACCT is not set
--CONFIG_AUDIT=y
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
- CONFIG_LOG_BUF_SHIFT=14
- # CONFIG_CGROUPS is not set
-@@ -71,7 +68,7 @@ CONFIG_TIMERFD=y
- CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_VM_EVENT_COUNTERS=y
--# CONFIG_SLUB_DEBUG is not set
-+CONFIG_SLUB_DEBUG=y
- # CONFIG_SLAB is not set
- CONFIG_SLUB=y
- # CONFIG_SLOB is not set
-@@ -90,6 +87,7 @@ CONFIG_HAVE_KPROBES=y
- CONFIG_HAVE_CLK=y
- CONFIG_PROC_PAGE_MONITOR=y
- # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-+CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=1
-@@ -131,20 +129,24 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
- CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PORTMUX_PIO=y
- CONFIG_PLATFORM_AT32AP=y
- CONFIG_CPU_AT32AP700X=y
- CONFIG_CPU_AT32AP7001=y
- CONFIG_BOARD_ATSTK1000=y
- # CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_FAVR_32 is not set
-+# CONFIG_BOARD_MIMC200 is not set
- # CONFIG_BOARD_ATSTK1002 is not set
- CONFIG_BOARD_ATSTK1003=y
- # CONFIG_BOARD_ATSTK1004 is not set
-+# CONFIG_BOARD_ATSTK1005 is not set
- # CONFIG_BOARD_ATSTK1006 is not set
- # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
- # CONFIG_BOARD_ATSTK100X_SPI1 is not set
--# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-+CONFIG_BOARD_ATSTK1000_J2_LED=y
- # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
--# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-+CONFIG_BOARD_ATSTK1000_J2_RGB=y
- CONFIG_BOARD_ATSTK1000_EXTDAC=y
- CONFIG_LOADER_U_BOOT=y
-
-@@ -188,7 +190,7 @@ CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
- # CONFIG_HZ_1000 is not set
- CONFIG_HZ=250
--# CONFIG_SCHED_HRTICK is not set
-+CONFIG_SCHED_HRTICK=y
- CONFIG_CMDLINE=""
-
- #
-@@ -239,40 +241,71 @@ CONFIG_NET=y
- CONFIG_PACKET=y
- CONFIG_PACKET_MMAP=y
- CONFIG_UNIX=y
--# CONFIG_NET_KEY is not set
-+CONFIG_XFRM=y
-+CONFIG_XFRM_USER=m
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_XFRM_IPCOMP=m
-+CONFIG_NET_KEY=m
-+# CONFIG_NET_KEY_MIGRATE is not set
- CONFIG_INET=y
- # CONFIG_IP_MULTICAST is not set
- # CONFIG_IP_ADVANCED_ROUTER is not set
- CONFIG_IP_FIB_HASH=y
--# CONFIG_IP_PNP is not set
--# CONFIG_NET_IPIP is not set
--# CONFIG_NET_IPGRE is not set
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+CONFIG_NET_IPIP=m
-+CONFIG_NET_IPGRE=m
- # CONFIG_ARPD is not set
- # CONFIG_SYN_COOKIES is not set
--# CONFIG_INET_AH is not set
--# CONFIG_INET_ESP is not set
-+CONFIG_INET_AH=m
-+CONFIG_INET_ESP=m
- # CONFIG_INET_IPCOMP is not set
- # CONFIG_INET_XFRM_TUNNEL is not set
--# CONFIG_INET_TUNNEL is not set
--# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
--# CONFIG_INET_XFRM_MODE_TUNNEL is not set
--# CONFIG_INET_XFRM_MODE_BEET is not set
-+CONFIG_INET_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET_XFRM_MODE_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_BEET=m
- # CONFIG_INET_LRO is not set
--# CONFIG_INET_DIAG is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
- # CONFIG_TCP_CONG_ADVANCED is not set
- CONFIG_TCP_CONG_CUBIC=y
- CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_TCP_MD5SIG is not set
--# CONFIG_IPV6 is not set
-+CONFIG_IPV6=m
-+# CONFIG_IPV6_PRIVACY is not set
-+# CONFIG_IPV6_ROUTER_PREF is not set
-+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-+CONFIG_INET6_AH=m
-+CONFIG_INET6_ESP=m
-+CONFIG_INET6_IPCOMP=m
-+# CONFIG_IPV6_MIP6 is not set
-+CONFIG_INET6_XFRM_TUNNEL=m
-+CONFIG_INET6_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET6_XFRM_MODE_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_BEET=m
-+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-+CONFIG_IPV6_SIT=m
-+CONFIG_IPV6_NDISC_NODETYPE=y
-+CONFIG_IPV6_TUNNEL=m
-+# CONFIG_IPV6_MULTIPLE_TABLES is not set
-+# CONFIG_IPV6_MROUTE is not set
- # CONFIG_NETWORK_SECMARK is not set
- # CONFIG_NETFILTER is not set
- # CONFIG_IP_DCCP is not set
- # CONFIG_IP_SCTP is not set
- # CONFIG_TIPC is not set
- # CONFIG_ATM is not set
--# CONFIG_BRIDGE is not set
-+CONFIG_STP=m
-+CONFIG_BRIDGE=m
- # CONFIG_VLAN_8021Q is not set
- # CONFIG_DECNET is not set
-+CONFIG_LLC=m
- # CONFIG_LLC2 is not set
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
-@@ -331,7 +364,8 @@ CONFIG_MTD_CMDLINE_PARTS=y
- #
- CONFIG_MTD_CHAR=y
- CONFIG_MTD_BLKDEVS=y
--CONFIG_MTD_BLOCK=y
-+# CONFIG_MTD_BLOCK is not set
-+# CONFIG_MTD_BLOCK_RO is not set
- # CONFIG_FTL is not set
- # CONFIG_NFTL is not set
- # CONFIG_INFTL is not set
-@@ -397,7 +431,15 @@ CONFIG_M25PXX_USE_FAST_READ=y
- #
- # UBI - Unsorted block images
- #
--# CONFIG_MTD_UBI is not set
-+CONFIG_MTD_UBI=y
-+CONFIG_MTD_UBI_WL_THRESHOLD=4096
-+CONFIG_MTD_UBI_BEB_RESERVE=1
-+# CONFIG_MTD_UBI_GLUEBI is not set
-+
-+#
-+# UBI debugging options
-+#
-+# CONFIG_MTD_UBI_DEBUG is not set
- # CONFIG_PARPORT is not set
- CONFIG_BLK_DEV=y
- # CONFIG_BLK_DEV_COW_COMMON is not set
-@@ -458,9 +500,7 @@ CONFIG_SCSI_WAIT_SCAN=m
- # CONFIG_SCSI_ISCSI_ATTRS is not set
- # CONFIG_SCSI_SAS_LIBSAS is not set
- # CONFIG_SCSI_SRP_ATTRS is not set
--CONFIG_SCSI_LOWLEVEL=y
--# CONFIG_ISCSI_TCP is not set
--# CONFIG_SCSI_DEBUG is not set
-+# CONFIG_SCSI_LOWLEVEL is not set
- # CONFIG_SCSI_DH is not set
- CONFIG_ATA=m
- # CONFIG_ATA_NONSTANDARD is not set
-@@ -477,7 +517,32 @@ CONFIG_NETDEVICES=y
- # CONFIG_EQUALIZER is not set
- # CONFIG_TUN is not set
- # CONFIG_VETH is not set
--# CONFIG_NET_ETHERNET is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+# CONFIG_MII is not set
-+CONFIG_MACB=y
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
- # CONFIG_NETDEV_1000 is not set
- # CONFIG_NETDEV_10000 is not set
-
-@@ -509,7 +574,7 @@ CONFIG_SLHC=m
- #
- # Input device support
- #
--CONFIG_INPUT=m
-+CONFIG_INPUT=y
- # CONFIG_INPUT_FF_MEMLESS is not set
- CONFIG_INPUT_POLLDEV=m
-
-@@ -521,7 +586,7 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
- CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
- CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
- # CONFIG_INPUT_JOYDEV is not set
--# CONFIG_INPUT_EVDEV is not set
-+CONFIG_INPUT_EVDEV=m
- # CONFIG_INPUT_EVBUG is not set
-
- #
-@@ -538,6 +603,8 @@ CONFIG_KEYBOARD_GPIO=m
- CONFIG_INPUT_MOUSE=y
- # CONFIG_MOUSE_PS2 is not set
- # CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_APPLETOUCH is not set
-+# CONFIG_MOUSE_BCM5974 is not set
- # CONFIG_MOUSE_VSXXXAA is not set
- CONFIG_MOUSE_GPIO=m
- # CONFIG_INPUT_JOYSTICK is not set
-@@ -555,7 +622,7 @@ CONFIG_MOUSE_GPIO=m
- # Character devices
- #
- # CONFIG_VT is not set
--# CONFIG_DEVKMEM is not set
-+CONFIG_DEVKMEM=y
- # CONFIG_SERIAL_NONSTANDARD is not set
-
- #
-@@ -582,6 +649,7 @@ CONFIG_UNIX98_PTYS=y
- CONFIG_I2C=m
- CONFIG_I2C_BOARDINFO=y
- CONFIG_I2C_CHARDEV=m
-+CONFIG_I2C_HELPER_AUTO=y
- CONFIG_I2C_ALGOBIT=m
-
- #
-@@ -611,7 +679,7 @@ CONFIG_I2C_GPIO=m
- # Miscellaneous I2C Chip support
- #
- # CONFIG_DS1682 is not set
--CONFIG_AT24=m
-+# CONFIG_AT24 is not set
- # CONFIG_SENSORS_EEPROM is not set
- # CONFIG_SENSORS_PCF8574 is not set
- # CONFIG_PCF8575 is not set
-@@ -631,6 +699,7 @@ CONFIG_SPI_MASTER=y
- #
- # SPI Master Controller Drivers
- #
-+CONFIG_SPI_ATMEL_HAVE_PDC=y
- CONFIG_SPI_ATMEL=y
- # CONFIG_SPI_BITBANG is not set
-
-@@ -673,7 +742,7 @@ CONFIG_WATCHDOG=y
- # Watchdog Device Drivers
- #
- # CONFIG_SOFT_WATCHDOG is not set
--CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32_WDT=y
-
- #
- # Sonics Silicon Backplane
-@@ -687,6 +756,7 @@ CONFIG_SSB_POSSIBLE=y
- # CONFIG_MFD_CORE is not set
- # CONFIG_MFD_SM501 is not set
- # CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-
- #
- # Multimedia devices
-@@ -726,8 +796,8 @@ CONFIG_SND_MIXER_OSS=m
- CONFIG_SND_PCM_OSS=m
- CONFIG_SND_PCM_OSS_PLUGINS=y
- # CONFIG_SND_DYNAMIC_MINORS is not set
--CONFIG_SND_SUPPORT_OLD_API=y
--CONFIG_SND_VERBOSE_PROCFS=y
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+# CONFIG_SND_VERBOSE_PROCFS is not set
- # CONFIG_SND_VERBOSE_PRINTK is not set
- # CONFIG_SND_DEBUG is not set
- # CONFIG_SND_DRIVERS is not set
-@@ -738,11 +808,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
- # CONFIG_SOUND_PRIME is not set
- # CONFIG_HID_SUPPORT is not set
- CONFIG_USB_SUPPORT=y
--# CONFIG_USB_ARCH_HAS_HCD is not set
--# CONFIG_USB_ARCH_HAS_OHCI is not set
--# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+# CONFIG_USB is not set
- # CONFIG_USB_OTG_WHITELIST is not set
- # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+# CONFIG_USB_MUSB_HDRC is not set
-+# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-@@ -750,7 +823,7 @@ CONFIG_USB_SUPPORT=y
- CONFIG_USB_GADGET=y
- # CONFIG_USB_GADGET_DEBUG is not set
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
--CONFIG_USB_GADGET_DEBUG_FS=y
-+# CONFIG_USB_GADGET_DEBUG_FS is not set
- CONFIG_USB_GADGET_SELECTED=y
- # CONFIG_USB_GADGET_AMD5536UDC is not set
- CONFIG_USB_GADGET_ATMEL_USBA=y
-@@ -787,33 +860,34 @@ CONFIG_MMC=y
- CONFIG_MMC_BLOCK=y
- CONFIG_MMC_BLOCK_BOUNCE=y
- # CONFIG_SDIO_UART is not set
--CONFIG_MMC_TEST=m
-+# CONFIG_MMC_TEST is not set
-
- #
- # MMC/SD Host Controller Drivers
- #
- # CONFIG_MMC_SDHCI is not set
- CONFIG_MMC_ATMELMCI=y
-+# CONFIG_MMC_ATMELMCI_DMA is not set
- CONFIG_MMC_SPI=m
- # CONFIG_MEMSTICK is not set
- CONFIG_NEW_LEDS=y
--CONFIG_LEDS_CLASS=y
-+CONFIG_LEDS_CLASS=m
-
- #
- # LED drivers
- #
- CONFIG_LEDS_ATMEL_PWM=m
- # CONFIG_LEDS_PCA9532 is not set
--CONFIG_LEDS_GPIO=y
-+CONFIG_LEDS_GPIO=m
- # CONFIG_LEDS_PCA955X is not set
-
- #
- # LED Triggers
- #
- CONFIG_LEDS_TRIGGERS=y
--CONFIG_LEDS_TRIGGER_TIMER=y
--CONFIG_LEDS_TRIGGER_HEARTBEAT=y
--CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-+CONFIG_LEDS_TRIGGER_TIMER=m
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
- # CONFIG_ACCESSIBILITY is not set
- CONFIG_RTC_LIB=y
- CONFIG_RTC_CLASS=y
-@@ -870,11 +944,13 @@ CONFIG_RTC_INTF_DEV=y
- # on-CPU RTC drivers
- #
- CONFIG_RTC_DRV_AT32AP700X=y
-+# CONFIG_RTC_DRV_AVR32_AST is not set
- CONFIG_DMADEVICES=y
-
- #
- # DMA Devices
- #
-+# CONFIG_ATMEL_PDCA is not set
- CONFIG_DW_DMAC=y
- CONFIG_DMA_ENGINE=y
-
-@@ -888,13 +964,13 @@ CONFIG_DMATEST=m
- #
- # File systems
- #
--CONFIG_EXT2_FS=m
-+CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
--CONFIG_EXT3_FS=m
-+CONFIG_EXT3_FS=y
- # CONFIG_EXT3_FS_XATTR is not set
- # CONFIG_EXT4DEV_FS is not set
--CONFIG_JBD=m
-+CONFIG_JBD=y
- # CONFIG_JBD_DEBUG is not set
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
-@@ -935,7 +1011,7 @@ CONFIG_SYSFS=y
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--CONFIG_CONFIGFS_FS=m
-+CONFIG_CONFIGFS_FS=y
-
- #
- # Miscellaneous filesystems
-@@ -958,16 +1034,39 @@ CONFIG_JFFS2_ZLIB=y
- # CONFIG_JFFS2_LZO is not set
- CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
-+CONFIG_UBIFS_FS=y
-+CONFIG_UBIFS_FS_XATTR=y
-+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-+CONFIG_UBIFS_FS_LZO=y
-+CONFIG_UBIFS_FS_ZLIB=y
-+# CONFIG_UBIFS_FS_DEBUG is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_VXFS_FS is not set
--# CONFIG_MINIX_FS is not set
-+CONFIG_MINIX_FS=m
- # CONFIG_OMFS_FS is not set
- # CONFIG_HPFS_FS is not set
- # CONFIG_QNX4FS_FS is not set
- # CONFIG_ROMFS_FS is not set
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
--# CONFIG_NETWORK_FILESYSTEMS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+CONFIG_ROOT_NFS=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-
- #
- # Partition Types
-@@ -1036,6 +1135,8 @@ CONFIG_SCHED_DEBUG=y
- # CONFIG_SCHEDSTATS is not set
- # CONFIG_TIMER_STATS is not set
- # CONFIG_DEBUG_OBJECTS is not set
-+# CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_SLUB_STATS is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
-@@ -1068,7 +1169,88 @@ CONFIG_FRAME_POINTER=y
- # CONFIG_KEYS is not set
- # CONFIG_SECURITY is not set
- # CONFIG_SECURITY_FILE_CAPABILITIES is not set
--# CONFIG_CRYPTO is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_AEAD=m
-+CONFIG_CRYPTO_BLKCIPHER=m
-+CONFIG_CRYPTO_HASH=m
-+CONFIG_CRYPTO_MANAGER=m
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_AUTHENC=m
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=m
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+# CONFIG_CRYPTO_ECB is not set
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+CONFIG_CRYPTO_HMAC=m
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=m
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+CONFIG_CRYPTO_SHA1=m
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+CONFIG_CRYPTO_DES=m
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+CONFIG_CRYPTO_DEFLATE=y
-+CONFIG_CRYPTO_LZO=y
-+# CONFIG_CRYPTO_HW is not set
-
- #
- # Library routines
-@@ -1077,15 +1259,16 @@ CONFIG_BITREVERSE=y
- # CONFIG_GENERIC_FIND_FIRST_BIT is not set
- # CONFIG_GENERIC_FIND_NEXT_BIT is not set
- CONFIG_CRC_CCITT=m
--# CONFIG_CRC16 is not set
-+CONFIG_CRC16=y
- CONFIG_CRC_T10DIF=m
- CONFIG_CRC_ITU_T=m
- CONFIG_CRC32=y
- CONFIG_CRC7=m
- # CONFIG_LIBCRC32C is not set
--CONFIG_AUDIT_GENERIC=y
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
-+CONFIG_LZO_COMPRESS=y
-+CONFIG_LZO_DECOMPRESS=y
- CONFIG_GENERIC_ALLOCATOR=y
- CONFIG_PLIST=y
- CONFIG_HAS_IOMEM=y
-diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
-index 69e6c0d..9f76e2a 100644
---- a/arch/avr32/configs/atstk1004_defconfig
-+++ b/arch/avr32/configs/atstk1004_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.27-rc1
--# Tue Aug 5 15:38:56 2008
-+# Linux kernel version: 2.6.27.4
-+# Wed Nov 12 10:35:14 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -30,8 +30,10 @@ CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
- CONFIG_LOCALVERSION=""
- # CONFIG_LOCALVERSION_AUTO is not set
--# CONFIG_SYSVIPC is not set
--# CONFIG_POSIX_MQUEUE is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
- # CONFIG_AUDIT is not set
-@@ -41,14 +43,16 @@ CONFIG_LOG_BUF_SHIFT=14
- # CONFIG_GROUP_SCHED is not set
- CONFIG_SYSFS_DEPRECATED=y
- CONFIG_SYSFS_DEPRECATED_V2=y
--# CONFIG_RELAY is not set
-+CONFIG_RELAY=y
- # CONFIG_NAMESPACES is not set
--# CONFIG_BLK_DEV_INITRD is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
- CONFIG_SYSCTL=y
- CONFIG_EMBEDDED=y
- # CONFIG_SYSCTL_SYSCALL is not set
- CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
- # CONFIG_KALLSYMS_EXTRA_PASS is not set
- CONFIG_HOTPLUG=y
- CONFIG_PRINTK=y
-@@ -56,19 +60,23 @@ CONFIG_BUG=y
- CONFIG_ELF_CORE=y
- # CONFIG_COMPAT_BRK is not set
- # CONFIG_BASE_FULL is not set
--# CONFIG_FUTEX is not set
--# CONFIG_EPOLL is not set
--# CONFIG_SIGNALFD is not set
--# CONFIG_TIMERFD is not set
--# CONFIG_EVENTFD is not set
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLUB_DEBUG=y
- # CONFIG_SLAB is not set
--# CONFIG_SLUB is not set
--CONFIG_SLOB=y
--# CONFIG_PROFILING is not set
-+CONFIG_SLUB=y
-+# CONFIG_SLOB is not set
-+CONFIG_PROFILING=y
- # CONFIG_MARKERS is not set
-+CONFIG_OPROFILE=m
- CONFIG_HAVE_OPROFILE=y
-+CONFIG_KPROBES=y
- # CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
- # CONFIG_HAVE_IOREMAP_PROT is not set
- CONFIG_HAVE_KPROBES=y
-@@ -77,36 +85,68 @@ CONFIG_HAVE_KPROBES=y
- # CONFIG_HAVE_DMA_ATTRS is not set
- # CONFIG_USE_GENERIC_SMP_HELPERS is not set
- CONFIG_HAVE_CLK=y
--# CONFIG_PROC_PAGE_MONITOR is not set
-+CONFIG_PROC_PAGE_MONITOR=y
- # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=1
--# CONFIG_MODULES is not set
--# CONFIG_BLOCK is not set
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_KMOD=y
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_BLK_DEV_INTEGRITY is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+# CONFIG_IOSCHED_AS is not set
-+# CONFIG_IOSCHED_DEADLINE is not set
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
- CONFIG_CLASSIC_RCU=y
-
- #
- # System Type and features
- #
--# CONFIG_TICK_ONESHOT is not set
--# CONFIG_NO_HZ is not set
--# CONFIG_HIGH_RES_TIMERS is not set
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
- CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
- CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PORTMUX_PIO=y
- CONFIG_PLATFORM_AT32AP=y
- CONFIG_CPU_AT32AP700X=y
- CONFIG_CPU_AT32AP7002=y
- CONFIG_BOARD_ATSTK1000=y
- # CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_FAVR_32 is not set
-+# CONFIG_BOARD_MIMC200 is not set
- # CONFIG_BOARD_ATSTK1002 is not set
- # CONFIG_BOARD_ATSTK1003 is not set
- CONFIG_BOARD_ATSTK1004=y
-+# CONFIG_BOARD_ATSTK1005 is not set
- # CONFIG_BOARD_ATSTK1006 is not set
- # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
- # CONFIG_BOARD_ATSTK100X_SPI1 is not set
--# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-+CONFIG_BOARD_ATSTK1000_J2_LED=y
-+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-+CONFIG_BOARD_ATSTK1000_J2_RGB=y
- CONFIG_BOARD_ATSTK1000_EXTDAC=y
- CONFIG_LOADER_U_BOOT=y
-
-@@ -144,25 +184,43 @@ CONFIG_ZONE_DMA_FLAG=0
- CONFIG_NR_QUICK=2
- CONFIG_VIRT_TO_BUS=y
- # CONFIG_OWNERSHIP_TRACE is not set
--# CONFIG_NMI_DEBUGGING is not set
-+CONFIG_NMI_DEBUGGING=y
- # CONFIG_HZ_100 is not set
- CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
- # CONFIG_HZ_1000 is not set
- CONFIG_HZ=250
--# CONFIG_SCHED_HRTICK is not set
-+CONFIG_SCHED_HRTICK=y
- CONFIG_CMDLINE=""
-
- #
- # Power management options
- #
--# CONFIG_PM is not set
-+CONFIG_PM=y
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
- CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
- #
- # CPU Frequency scaling
- #
--# CONFIG_CPU_FREQ is not set
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+# CONFIG_CPU_FREQ_STAT is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-
- #
- # Bus options
-@@ -183,40 +241,71 @@ CONFIG_NET=y
- CONFIG_PACKET=y
- CONFIG_PACKET_MMAP=y
- CONFIG_UNIX=y
--# CONFIG_NET_KEY is not set
-+CONFIG_XFRM=y
-+CONFIG_XFRM_USER=m
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_XFRM_IPCOMP=m
-+CONFIG_NET_KEY=m
-+# CONFIG_NET_KEY_MIGRATE is not set
- CONFIG_INET=y
- # CONFIG_IP_MULTICAST is not set
- # CONFIG_IP_ADVANCED_ROUTER is not set
- CONFIG_IP_FIB_HASH=y
--# CONFIG_IP_PNP is not set
--# CONFIG_NET_IPIP is not set
--# CONFIG_NET_IPGRE is not set
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+CONFIG_NET_IPIP=m
-+CONFIG_NET_IPGRE=m
- # CONFIG_ARPD is not set
- # CONFIG_SYN_COOKIES is not set
--# CONFIG_INET_AH is not set
--# CONFIG_INET_ESP is not set
-+CONFIG_INET_AH=m
-+CONFIG_INET_ESP=m
- # CONFIG_INET_IPCOMP is not set
- # CONFIG_INET_XFRM_TUNNEL is not set
--# CONFIG_INET_TUNNEL is not set
--# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
--# CONFIG_INET_XFRM_MODE_TUNNEL is not set
--# CONFIG_INET_XFRM_MODE_BEET is not set
-+CONFIG_INET_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET_XFRM_MODE_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_BEET=m
- # CONFIG_INET_LRO is not set
--# CONFIG_INET_DIAG is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
- # CONFIG_TCP_CONG_ADVANCED is not set
- CONFIG_TCP_CONG_CUBIC=y
- CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_TCP_MD5SIG is not set
--# CONFIG_IPV6 is not set
-+CONFIG_IPV6=m
-+# CONFIG_IPV6_PRIVACY is not set
-+# CONFIG_IPV6_ROUTER_PREF is not set
-+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-+CONFIG_INET6_AH=m
-+CONFIG_INET6_ESP=m
-+CONFIG_INET6_IPCOMP=m
-+# CONFIG_IPV6_MIP6 is not set
-+CONFIG_INET6_XFRM_TUNNEL=m
-+CONFIG_INET6_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET6_XFRM_MODE_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_BEET=m
-+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-+CONFIG_IPV6_SIT=m
-+CONFIG_IPV6_NDISC_NODETYPE=y
-+CONFIG_IPV6_TUNNEL=m
-+# CONFIG_IPV6_MULTIPLE_TABLES is not set
-+# CONFIG_IPV6_MROUTE is not set
- # CONFIG_NETWORK_SECMARK is not set
- # CONFIG_NETFILTER is not set
- # CONFIG_IP_DCCP is not set
- # CONFIG_IP_SCTP is not set
- # CONFIG_TIPC is not set
- # CONFIG_ATM is not set
--# CONFIG_BRIDGE is not set
-+CONFIG_STP=m
-+CONFIG_BRIDGE=m
- # CONFIG_VLAN_8021Q is not set
- # CONFIG_DECNET is not set
-+CONFIG_LLC=m
- # CONFIG_LLC2 is not set
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
-@@ -230,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # Network testing
- #
- # CONFIG_NET_PKTGEN is not set
-+# CONFIG_NET_TCPPROBE is not set
- # CONFIG_HAMRADIO is not set
- # CONFIG_CAN is not set
- # CONFIG_IRDA is not set
-@@ -257,6 +347,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
- CONFIG_STANDALONE=y
- # CONFIG_PREVENT_FIRMWARE_BUILD is not set
- # CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
- # CONFIG_SYS_HYPERVISOR is not set
- # CONFIG_CONNECTOR is not set
- CONFIG_MTD=y
-@@ -271,6 +363,14 @@ CONFIG_MTD_CMDLINE_PARTS=y
- # User Modules And Translation Layers
- #
- CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+# CONFIG_MTD_BLOCK is not set
-+# CONFIG_MTD_BLOCK_RO is not set
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
- # CONFIG_MTD_OOPS is not set
-
- #
-@@ -311,11 +411,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- #
- # Self-contained MTD device drivers
- #
--# CONFIG_MTD_DATAFLASH is not set
--# CONFIG_MTD_M25P80 is not set
-+CONFIG_MTD_DATAFLASH=m
-+CONFIG_MTD_M25P80=m
-+CONFIG_M25PXX_USE_FAST_READ=y
- # CONFIG_MTD_SLRAM is not set
- # CONFIG_MTD_PHRAM is not set
- # CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-
- #
- # Disk-On-Chip Device Drivers
-@@ -329,24 +431,186 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- #
- # UBI - Unsorted block images
- #
--# CONFIG_MTD_UBI is not set
-+CONFIG_MTD_UBI=y
-+CONFIG_MTD_UBI_WL_THRESHOLD=4096
-+CONFIG_MTD_UBI_BEB_RESERVE=1
-+# CONFIG_MTD_UBI_GLUEBI is not set
-+
-+#
-+# UBI debugging options
-+#
-+# CONFIG_MTD_UBI_DEBUG is not set
- # CONFIG_PARPORT is not set
--# CONFIG_MISC_DEVICES is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=m
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+CONFIG_BLK_DEV_NBD=m
-+CONFIG_BLK_DEV_RAM=m
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=4096
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+CONFIG_ATMEL_PWM=m
-+CONFIG_ATMEL_TCLIB=y
-+CONFIG_ATMEL_TCB_CLKSRC=y
-+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_ATMEL_SSC=m
-+# CONFIG_ENCLOSURE_SERVICES is not set
- # CONFIG_HAVE_IDE is not set
-
- #
- # SCSI device support
- #
--# CONFIG_SCSI_DMA is not set
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=m
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
- # CONFIG_SCSI_NETLINK is not set
--# CONFIG_NETDEVICES is not set
-+# CONFIG_SCSI_PROC_FS is not set
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=m
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+CONFIG_BLK_DEV_SR=m
-+# CONFIG_BLK_DEV_SR_VENDOR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_MULTI_LUN is not set
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+# CONFIG_SCSI_LOWLEVEL is not set
-+# CONFIG_SCSI_DH is not set
-+CONFIG_ATA=m
-+# CONFIG_ATA_NONSTANDARD is not set
-+# CONFIG_SATA_PMP is not set
-+CONFIG_ATA_SFF=y
-+# CONFIG_SATA_MV is not set
-+CONFIG_PATA_AT32=m
-+# CONFIG_PATA_PLATFORM is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+# CONFIG_MII is not set
-+CONFIG_MACB=y
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+# CONFIG_WAN is not set
-+CONFIG_PPP=m
-+# CONFIG_PPP_MULTILINK is not set
-+# CONFIG_PPP_FILTER is not set
-+CONFIG_PPP_ASYNC=m
-+# CONFIG_PPP_SYNC_TTY is not set
-+CONFIG_PPP_DEFLATE=m
-+CONFIG_PPP_BSDCOMP=m
-+# CONFIG_PPP_MPPE is not set
-+# CONFIG_PPPOE is not set
-+# CONFIG_PPPOL2TP is not set
-+# CONFIG_SLIP is not set
-+CONFIG_SLHC=m
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
- # CONFIG_ISDN is not set
- # CONFIG_PHONE is not set
-
- #
- # Input device support
- #
--# CONFIG_INPUT is not set
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+CONFIG_INPUT_POLLDEV=m
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=m
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=m
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+CONFIG_KEYBOARD_GPIO=m
-+CONFIG_INPUT_MOUSE=y
-+# CONFIG_MOUSE_PS2 is not set
-+# CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_APPLETOUCH is not set
-+# CONFIG_MOUSE_BCM5974 is not set
-+# CONFIG_MOUSE_VSXXXAA is not set
-+CONFIG_MOUSE_GPIO=m
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-
- #
- # Hardware I/O ports
-@@ -357,8 +621,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- #
- # Character devices
- #
--# CONFIG_VT is not set
--# CONFIG_DEVKMEM is not set
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
- # CONFIG_SERIAL_NONSTANDARD is not set
-
- #
-@@ -371,7 +639,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- #
- CONFIG_SERIAL_ATMEL=y
- CONFIG_SERIAL_ATMEL_CONSOLE=y
--# CONFIG_SERIAL_ATMEL_PDC is not set
-+CONFIG_SERIAL_ATMEL_PDC=y
- # CONFIG_SERIAL_ATMEL_TTYAT is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
-@@ -380,14 +648,62 @@ CONFIG_UNIX98_PTYS=y
- # CONFIG_IPMI_HANDLER is not set
- # CONFIG_HW_RANDOM is not set
- # CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
- # CONFIG_TCG_TPM is not set
--# CONFIG_I2C is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
-+CONFIG_I2C_HELPER_AUTO=y
-+CONFIG_I2C_ALGOBIT=m
-+
-+#
-+# I2C Hardware Bus support
-+#
-+
-+#
-+# I2C system bus drivers (mostly embedded / system-on-chip)
-+#
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_SIMTEC is not set
-+
-+#
-+# External I2C/SMBus adapter drivers
-+#
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+
-+#
-+# Other I2C/SMBus bus drivers
-+#
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_AT24 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
- CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
- CONFIG_SPI_MASTER=y
-
- #
- # SPI Master Controller Drivers
- #
-+CONFIG_SPI_ATMEL_HAVE_PDC=y
- CONFIG_SPI_ATMEL=y
- # CONFIG_SPI_BITBANG is not set
-
-@@ -395,15 +711,19 @@ CONFIG_SPI_ATMEL=y
- # SPI Protocol Masters
- #
- # CONFIG_SPI_AT25 is not set
--# CONFIG_SPI_SPIDEV is not set
-+CONFIG_SPI_SPIDEV=m
- # CONFIG_SPI_TLE62X0 is not set
- CONFIG_ARCH_REQUIRE_GPIOLIB=y
- CONFIG_GPIOLIB=y
--# CONFIG_GPIO_SYSFS is not set
-+# CONFIG_DEBUG_GPIO is not set
-+CONFIG_GPIO_SYSFS=y
-
- #
- # I2C GPIO expanders:
- #
-+# CONFIG_GPIO_MAX732X is not set
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-
- #
- # PCI GPIO expanders:
-@@ -426,7 +746,7 @@ CONFIG_WATCHDOG=y
- # Watchdog Device Drivers
- #
- # CONFIG_SOFT_WATCHDOG is not set
--CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32_WDT=y
-
- #
- # Sonics Silicon Backplane
-@@ -440,6 +760,7 @@ CONFIG_SSB_POSSIBLE=y
- # CONFIG_MFD_CORE is not set
- # CONFIG_MFD_SM501 is not set
- # CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-
- #
- # Multimedia devices
-@@ -485,6 +806,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
- #
- # CONFIG_FB_S1D13XXX is not set
- CONFIG_FB_ATMEL=y
-+# CONFIG_FB_ATMEL_MPOP is not set
- # CONFIG_FB_VIRTUAL is not set
- CONFIG_BACKLIGHT_LCD_SUPPORT=y
- CONFIG_LCD_CLASS_DEVICE=y
-@@ -498,20 +820,51 @@ CONFIG_LCD_LTV350QV=y
- # Display device support
- #
- # CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE is not set
- # CONFIG_LOGO is not set
--# CONFIG_SOUND is not set
-+CONFIG_SOUND=m
-+CONFIG_SND=m
-+CONFIG_SND_TIMER=m
-+CONFIG_SND_PCM=m
-+# CONFIG_SND_SEQUENCER is not set
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+# CONFIG_SND_VERBOSE_PROCFS is not set
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+# CONFIG_SND_DRIVERS is not set
-+CONFIG_SND_SPI=y
-+CONFIG_SND_AT73C213=m
-+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-+# CONFIG_SND_SOC is not set
-+# CONFIG_SOUND_PRIME is not set
-+# CONFIG_HID_SUPPORT is not set
- CONFIG_USB_SUPPORT=y
--# CONFIG_USB_ARCH_HAS_HCD is not set
--# CONFIG_USB_ARCH_HAS_OHCI is not set
--# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+# CONFIG_USB is not set
- # CONFIG_USB_OTG_WHITELIST is not set
- # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+# CONFIG_USB_MUSB_HDRC is not set
-+# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
- #
- CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG is not set
- # CONFIG_USB_GADGET_DEBUG_FILES is not set
-+# CONFIG_USB_GADGET_DEBUG_FS is not set
- CONFIG_USB_GADGET_SELECTED=y
- # CONFIG_USB_GADGET_AMD5536UDC is not set
- CONFIG_USB_GADGET_ATMEL_USBA=y
-@@ -528,18 +881,54 @@ CONFIG_USB_ATMEL_USBA=y
- # CONFIG_USB_GADGET_AT91 is not set
- # CONFIG_USB_GADGET_DUMMY_HCD is not set
- CONFIG_USB_GADGET_DUALSPEED=y
--# CONFIG_USB_ZERO is not set
--CONFIG_USB_ETH=y
--# CONFIG_USB_ETH_RNDIS is not set
--# CONFIG_USB_GADGETFS is not set
--# CONFIG_USB_FILE_STORAGE is not set
--# CONFIG_USB_G_SERIAL is not set
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
- # CONFIG_USB_MIDI_GADGET is not set
- # CONFIG_USB_G_PRINTER is not set
--# CONFIG_USB_CDC_COMPOSITE is not set
--# CONFIG_MMC is not set
-+CONFIG_USB_CDC_COMPOSITE=m
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-+# CONFIG_MMC_TEST is not set
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+# CONFIG_MMC_SDHCI is not set
-+CONFIG_MMC_ATMELMCI=y
-+# CONFIG_MMC_ATMELMCI_DMA is not set
-+CONFIG_MMC_SPI=m
- # CONFIG_MEMSTICK is not set
--# CONFIG_NEW_LEDS is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=m
-+
-+#
-+# LED drivers
-+#
-+CONFIG_LEDS_ATMEL_PWM=m
-+# CONFIG_LEDS_PCA9532 is not set
-+CONFIG_LEDS_GPIO=m
-+# CONFIG_LEDS_PCA955X is not set
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=m
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
- # CONFIG_ACCESSIBILITY is not set
- CONFIG_RTC_LIB=y
- CONFIG_RTC_CLASS=y
-@@ -551,12 +940,28 @@ CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
- # RTC interfaces
- #
- CONFIG_RTC_INTF_SYSFS=y
--# CONFIG_RTC_INTF_PROC is not set
-+CONFIG_RTC_INTF_PROC=y
- CONFIG_RTC_INTF_DEV=y
- # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
- # CONFIG_RTC_DRV_TEST is not set
-
- #
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-+# CONFIG_RTC_DRV_FM3130 is not set
-+
-+#
- # SPI RTC drivers
- #
- # CONFIG_RTC_DRV_M41T94 is not set
-@@ -580,18 +985,62 @@ CONFIG_RTC_INTF_DEV=y
- # on-CPU RTC drivers
- #
- CONFIG_RTC_DRV_AT32AP700X=y
--# CONFIG_DMADEVICES is not set
-+# CONFIG_RTC_DRV_AVR32_AST is not set
-+CONFIG_DMADEVICES=y
-+
-+#
-+# DMA Devices
-+#
-+# CONFIG_ATMEL_PDCA is not set
-+CONFIG_DW_DMAC=y
-+CONFIG_DMA_ENGINE=y
-+
-+#
-+# DMA Clients
-+#
-+# CONFIG_NET_DMA is not set
-+CONFIG_DMATEST=m
- # CONFIG_UIO is not set
-
- #
- # File systems
- #
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_OCFS2_FS is not set
- # CONFIG_DNOTIFY is not set
--# CONFIG_INOTIFY is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
- # CONFIG_QUOTA is not set
- # CONFIG_AUTOFS_FS is not set
- # CONFIG_AUTOFS4_FS is not set
--# CONFIG_FUSE_FS is not set
-+CONFIG_FUSE_FS=m
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=m
-+CONFIG_MSDOS_FS=m
-+CONFIG_VFAT_FS=m
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-
- #
- # Pseudo filesystems
-@@ -603,14 +1052,22 @@ CONFIG_SYSFS=y
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--# CONFIG_CONFIGFS_FS is not set
-+CONFIG_CONFIGFS_FS=y
-
- #
- # Miscellaneous filesystems
- #
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
- CONFIG_JFFS2_FS=y
- CONFIG_JFFS2_FS_DEBUG=0
--# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
- # CONFIG_JFFS2_SUMMARY is not set
- # CONFIG_JFFS2_FS_XATTR is not set
- # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-@@ -618,8 +1075,85 @@ CONFIG_JFFS2_ZLIB=y
- # CONFIG_JFFS2_LZO is not set
- CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
--# CONFIG_NETWORK_FILESYSTEMS is not set
--# CONFIG_NLS is not set
-+CONFIG_UBIFS_FS=y
-+CONFIG_UBIFS_FS_XATTR=y
-+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-+CONFIG_UBIFS_FS_LZO=y
-+CONFIG_UBIFS_FS_ZLIB=y
-+# CONFIG_UBIFS_FS_DEBUG is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+CONFIG_MINIX_FS=m
-+# CONFIG_OMFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+CONFIG_ROOT_NFS=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+CONFIG_NLS=m
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=m
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=m
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=m
- # CONFIG_DLM is not set
-
- #
-@@ -631,11 +1165,43 @@ CONFIG_ENABLE_MUST_CHECK=y
- CONFIG_FRAME_WARN=1024
- CONFIG_MAGIC_SYSRQ=y
- # CONFIG_UNUSED_SYMBOLS is not set
--# CONFIG_DEBUG_FS is not set
-+CONFIG_DEBUG_FS=y
- # CONFIG_HEADERS_CHECK is not set
--# CONFIG_DEBUG_KERNEL is not set
--# CONFIG_DEBUG_BUGVERBOSE is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_OBJECTS is not set
-+# CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_SLUB_STATS is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_WRITECOUNT is not set
- # CONFIG_DEBUG_MEMORY_INIT is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_KPROBES_SANITY_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
-+# CONFIG_LKDTM is not set
-+# CONFIG_FAULT_INJECTION is not set
- # CONFIG_SAMPLES is not set
-
- #
-@@ -644,7 +1210,88 @@ CONFIG_MAGIC_SYSRQ=y
- # CONFIG_KEYS is not set
- # CONFIG_SECURITY is not set
- # CONFIG_SECURITY_FILE_CAPABILITIES is not set
--# CONFIG_CRYPTO is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_AEAD=m
-+CONFIG_CRYPTO_BLKCIPHER=m
-+CONFIG_CRYPTO_HASH=m
-+CONFIG_CRYPTO_MANAGER=m
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_AUTHENC=m
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=m
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+# CONFIG_CRYPTO_ECB is not set
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+CONFIG_CRYPTO_HMAC=m
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=m
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+CONFIG_CRYPTO_SHA1=m
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+CONFIG_CRYPTO_DES=m
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+CONFIG_CRYPTO_DEFLATE=y
-+CONFIG_CRYPTO_LZO=y
-+# CONFIG_CRYPTO_HW is not set
-
- #
- # Library routines
-@@ -652,16 +1299,19 @@ CONFIG_MAGIC_SYSRQ=y
- CONFIG_BITREVERSE=y
- # CONFIG_GENERIC_FIND_FIRST_BIT is not set
- # CONFIG_GENERIC_FIND_NEXT_BIT is not set
--# CONFIG_CRC_CCITT is not set
--# CONFIG_CRC16 is not set
--# CONFIG_CRC_T10DIF is not set
--# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC_CCITT=m
-+CONFIG_CRC16=y
-+CONFIG_CRC_T10DIF=m
-+CONFIG_CRC_ITU_T=m
- CONFIG_CRC32=y
--# CONFIG_CRC7 is not set
-+CONFIG_CRC7=m
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
-+CONFIG_LZO_COMPRESS=y
-+CONFIG_LZO_DECOMPRESS=y
- CONFIG_GENERIC_ALLOCATOR=y
-+CONFIG_PLIST=y
- CONFIG_HAS_IOMEM=y
- CONFIG_HAS_IOPORT=y
- CONFIG_HAS_DMA=y
-diff --git a/arch/avr32/configs/atstk1005_defconfig b/arch/avr32/configs/atstk1005_defconfig
-new file mode 100644
-index 0000000..e36b73d
---- /dev/null
-+++ b/arch/avr32/configs/atstk1005_defconfig
-@@ -0,0 +1,1505 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.27.4
-+# Fri Nov 7 10:22:27 2008
-+#
-+CONFIG_AVR32=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_GENERIC_BUG=y
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+# CONFIG_GROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+CONFIG_RELAY=y
-+# CONFIG_NAMESPACES is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+# CONFIG_SYSCTL_SYSCALL is not set
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+# CONFIG_COMPAT_BRK is not set
-+# CONFIG_BASE_FULL is not set
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLUB_DEBUG=y
-+# CONFIG_SLAB is not set
-+CONFIG_SLUB=y
-+# CONFIG_SLOB is not set
-+CONFIG_PROFILING=y
-+# CONFIG_MARKERS is not set
-+CONFIG_OPROFILE=m
-+CONFIG_HAVE_OPROFILE=y
-+CONFIG_KPROBES=y
-+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-+# CONFIG_HAVE_IOREMAP_PROT is not set
-+CONFIG_HAVE_KPROBES=y
-+# CONFIG_HAVE_KRETPROBES is not set
-+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-+# CONFIG_HAVE_DMA_ATTRS is not set
-+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-+CONFIG_HAVE_CLK=y
-+CONFIG_PROC_PAGE_MONITOR=y
-+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=1
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_KMOD=y
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_BLK_DEV_INTEGRITY is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+# CONFIG_IOSCHED_AS is not set
-+# CONFIG_IOSCHED_DEADLINE is not set
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
-+
-+#
-+# System Type and features
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+CONFIG_SUBARCH_AVR32B=y
-+CONFIG_MMU=y
-+CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PORTMUX_GPIO_V2=y
-+CONFIG_TIMER_AST=y
-+CONFIG_PLATFORM_AT32AP=y
-+CONFIG_CPU_AT32AP720X=y
-+CONFIG_CPU_AT32AP7200=y
-+CONFIG_BOARD_ATSTK1000=y
-+# CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_FAVR_32 is not set
-+# CONFIG_BOARD_MIMC200 is not set
-+# CONFIG_BOARD_ATSTK1002 is not set
-+# CONFIG_BOARD_ATSTK1003 is not set
-+# CONFIG_BOARD_ATSTK1004 is not set
-+CONFIG_BOARD_ATSTK1005=y
-+# CONFIG_BOARD_ATSTK1006 is not set
-+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-+CONFIG_BOARD_ATSTK1000_J2_LED=y
-+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-+CONFIG_BOARD_ATSTK1000_J2_RGB=y
-+CONFIG_BOARD_ATSTK1000_EXTDAC=y
-+CONFIG_LOADER_U_BOOT=y
-+
-+#
-+# Atmel AVR32 AP options
-+#
-+CONFIG_LOAD_ADDRESS=0x10000000
-+CONFIG_ENTRY_ADDRESS=0x90000000
-+CONFIG_PHYS_OFFSET=0x10000000
-+CONFIG_PREEMPT_NONE=y
-+# CONFIG_PREEMPT_VOLUNTARY is not set
-+# CONFIG_PREEMPT is not set
-+CONFIG_QUICKLIST=y
-+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-+CONFIG_ARCH_FLATMEM_ENABLE=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=0
-+CONFIG_NR_QUICK=2
-+CONFIG_VIRT_TO_BUS=y
-+# CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_NMI_DEBUGGING=y
-+# CONFIG_HZ_100 is not set
-+CONFIG_HZ_250=y
-+# CONFIG_HZ_300 is not set
-+# CONFIG_HZ_1000 is not set
-+CONFIG_HZ=250
-+CONFIG_SCHED_HRTICK=y
-+CONFIG_CMDLINE=""
-+
-+#
-+# Power management options
-+#
-+CONFIG_PM=y
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+
-+#
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+# CONFIG_CPU_FREQ_STAT is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-+
-+#
-+# Bus options
-+#
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Executable file formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_MISC is not set
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+CONFIG_XFRM_USER=m
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_XFRM_IPCOMP=m
-+CONFIG_NET_KEY=m
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+CONFIG_NET_IPIP=m
-+CONFIG_NET_IPGRE=m
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+CONFIG_INET_AH=m
-+CONFIG_INET_ESP=m
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+CONFIG_INET_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET_XFRM_MODE_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_BEET=m
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+CONFIG_IPV6=m
-+# CONFIG_IPV6_PRIVACY is not set
-+# CONFIG_IPV6_ROUTER_PREF is not set
-+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-+CONFIG_INET6_AH=m
-+CONFIG_INET6_ESP=m
-+CONFIG_INET6_IPCOMP=m
-+# CONFIG_IPV6_MIP6 is not set
-+CONFIG_INET6_XFRM_TUNNEL=m
-+CONFIG_INET6_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET6_XFRM_MODE_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_BEET=m
-+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-+CONFIG_IPV6_SIT=m
-+CONFIG_IPV6_NDISC_NODETYPE=y
-+CONFIG_IPV6_TUNNEL=m
-+# CONFIG_IPV6_MULTIPLE_TABLES is not set
-+# CONFIG_IPV6_MROUTE is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+CONFIG_STP=m
-+CONFIG_BRIDGE=m
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+CONFIG_LLC=m
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_NET_TCPPROBE is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+CONFIG_STANDALONE=y
-+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+# CONFIG_MTD_BLOCK is not set
-+# CONFIG_MTD_BLOCK_RO is not set
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_CFI_INTELEXT is not set
-+CONFIG_MTD_CFI_AMDSTD=y
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x8000000
-+CONFIG_MTD_PHYSMAP_LEN=0x0
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+CONFIG_MTD_DATAFLASH=m
-+CONFIG_MTD_M25P80=m
-+CONFIG_M25PXX_USE_FAST_READ=y
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_NAND=y
-+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+CONFIG_MTD_NAND_ECC_SMC=y
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+CONFIG_MTD_NAND_ATMEL=y
-+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ALAUDA is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+CONFIG_MTD_UBI=y
-+CONFIG_MTD_UBI_WL_THRESHOLD=4096
-+CONFIG_MTD_UBI_BEB_RESERVE=1
-+# CONFIG_MTD_UBI_GLUEBI is not set
-+
-+#
-+# UBI debugging options
-+#
-+# CONFIG_MTD_UBI_DEBUG is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=m
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+CONFIG_BLK_DEV_NBD=m
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=m
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=4096
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+CONFIG_ATMEL_PWM=m
-+# CONFIG_ATMEL_TCLIB is not set
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_ATMEL_SSC=m
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_HAVE_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=m
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+# CONFIG_SCSI_PROC_FS is not set
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=m
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+CONFIG_BLK_DEV_SR=m
-+# CONFIG_BLK_DEV_SR_VENDOR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_MULTI_LUN is not set
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+# CONFIG_SCSI_LOWLEVEL is not set
-+# CONFIG_SCSI_DH is not set
-+CONFIG_ATA=m
-+# CONFIG_ATA_NONSTANDARD is not set
-+# CONFIG_SATA_PMP is not set
-+CONFIG_ATA_SFF=y
-+# CONFIG_SATA_MV is not set
-+CONFIG_PATA_AT32=m
-+# CONFIG_PATA_PLATFORM is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=m
-+CONFIG_MACB=y
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+
-+#
-+# USB Network Adapters
-+#
-+CONFIG_USB_CATC=m
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+CONFIG_USB_USBNET=m
-+# CONFIG_USB_NET_AX8817X is not set
-+CONFIG_USB_NET_CDCETHER=m
-+# CONFIG_USB_NET_DM9601 is not set
-+# CONFIG_USB_NET_GL620A is not set
-+# CONFIG_USB_NET_NET1080 is not set
-+# CONFIG_USB_NET_PLUSB is not set
-+# CONFIG_USB_NET_MCS7830 is not set
-+# CONFIG_USB_NET_RNDIS_HOST is not set
-+CONFIG_USB_NET_CDC_SUBSET=m
-+# CONFIG_USB_ALI_M5632 is not set
-+# CONFIG_USB_AN2720 is not set
-+CONFIG_USB_BELKIN=y
-+CONFIG_USB_ARMLINUX=y
-+# CONFIG_USB_EPSON2888 is not set
-+# CONFIG_USB_KC2190 is not set
-+# CONFIG_USB_NET_ZAURUS is not set
-+# CONFIG_WAN is not set
-+CONFIG_PPP=m
-+# CONFIG_PPP_MULTILINK is not set
-+# CONFIG_PPP_FILTER is not set
-+CONFIG_PPP_ASYNC=m
-+# CONFIG_PPP_SYNC_TTY is not set
-+CONFIG_PPP_DEFLATE=m
-+CONFIG_PPP_BSDCOMP=m
-+# CONFIG_PPP_MPPE is not set
-+# CONFIG_PPPOE is not set
-+# CONFIG_PPPOL2TP is not set
-+# CONFIG_SLIP is not set
-+CONFIG_SLHC=m
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+CONFIG_INPUT_POLLDEV=m
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=m
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=m
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+CONFIG_KEYBOARD_GPIO=m
-+CONFIG_INPUT_MOUSE=y
-+# CONFIG_MOUSE_PS2 is not set
-+# CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_APPLETOUCH is not set
-+# CONFIG_MOUSE_BCM5974 is not set
-+# CONFIG_MOUSE_VSXXXAA is not set
-+CONFIG_MOUSE_GPIO=m
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+CONFIG_SERIAL_ATMEL_PDC=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
-+CONFIG_I2C_HELPER_AUTO=y
-+CONFIG_I2C_ALGOBIT=m
-+
-+#
-+# I2C Hardware Bus support
-+#
-+
-+#
-+# I2C system bus drivers (mostly embedded / system-on-chip)
-+#
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_SIMTEC is not set
-+
-+#
-+# External I2C/SMBus adapter drivers
-+#
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+CONFIG_I2C_TINY_USB=m
-+
-+#
-+# Other I2C/SMBus bus drivers
-+#
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_AT24 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+CONFIG_SPI_SPIDEV=m
-+# CONFIG_SPI_TLE62X0 is not set
-+CONFIG_ARCH_REQUIRE_GPIOLIB=y
-+CONFIG_GPIOLIB=y
-+# CONFIG_DEBUG_GPIO is not set
-+CONFIG_GPIO_SYSFS=y
-+
-+#
-+# I2C GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX732X is not set
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-+
-+#
-+# PCI GPIO expanders:
-+#
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX7301 is not set
-+# CONFIG_GPIO_MCP23S08 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+# CONFIG_THERMAL_HWMON is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32_WDT=y
-+
-+#
-+# USB-based Watchdog Cards
-+#
-+# CONFIG_USBPCWATCHDOG is not set
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_CORE is not set
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-+
-+#
-+# Multimedia devices
-+#
-+
-+#
-+# Multimedia core support
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_VIDEO_MEDIA is not set
-+
-+#
-+# Multimedia drivers
-+#
-+# CONFIG_DAB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_FOREIGN_ENDIAN is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_ATMEL=y
-+# CONFIG_FB_ATMEL_MPOP is not set
-+# CONFIG_FB_VIRTUAL is not set
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_LCD_CLASS_DEVICE=y
-+CONFIG_LCD_LTV350QV=y
-+# CONFIG_LCD_ILI9320 is not set
-+# CONFIG_LCD_VGG2432A4 is not set
-+# CONFIG_LCD_PLATFORM is not set
-+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE is not set
-+# CONFIG_LOGO is not set
-+CONFIG_SOUND=m
-+CONFIG_SND=m
-+CONFIG_SND_TIMER=m
-+CONFIG_SND_PCM=m
-+CONFIG_SND_HWDEP=m
-+CONFIG_SND_RAWMIDI=m
-+# CONFIG_SND_SEQUENCER is not set
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+# CONFIG_SND_VERBOSE_PROCFS is not set
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+# CONFIG_SND_DRIVERS is not set
-+CONFIG_SND_SPI=y
-+CONFIG_SND_AT73C213=m
-+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-+CONFIG_SND_USB=y
-+CONFIG_SND_USB_AUDIO=m
-+# CONFIG_SND_USB_CAIAQ is not set
-+# CONFIG_SND_SOC is not set
-+# CONFIG_SOUND_PRIME is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+# CONFIG_HIDRAW is not set
-+
-+#
-+# USB Input Devices
-+#
-+CONFIG_USB_HID=y
-+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-+# CONFIG_HID_FF is not set
-+# CONFIG_USB_HIDDEV is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_DEVICE_CLASS is not set
-+CONFIG_USB_DYNAMIC_MINORS=y
-+CONFIG_USB_SUSPEND=y
-+# CONFIG_USB_OTG is not set
-+# CONFIG_USB_OTG_WHITELIST is not set
-+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+CONFIG_USB_MON=y
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_C67X00_HCD is not set
-+CONFIG_USB_EHCI_HCD=y
-+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
-+# CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_ISP1760_HCD is not set
-+CONFIG_USB_OHCI_HCD=y
-+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-+# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+# CONFIG_USB_MUSB_HDRC is not set
-+# CONFIG_USB_GADGET_MUSB_HDRC is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+CONFIG_USB_ACM=m
-+CONFIG_USB_PRINTER=m
-+CONFIG_USB_WDM=m
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=m
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_ISD200 is not set
-+# CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_ONETOUCH is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+
-+#
-+# USB port drivers
-+#
-+CONFIG_USB_SERIAL=m
-+# CONFIG_USB_EZUSB is not set
-+CONFIG_USB_SERIAL_GENERIC=y
-+# CONFIG_USB_SERIAL_AIRCABLE is not set
-+# CONFIG_USB_SERIAL_ARK3116 is not set
-+# CONFIG_USB_SERIAL_BELKIN is not set
-+# CONFIG_USB_SERIAL_CH341 is not set
-+# CONFIG_USB_SERIAL_WHITEHEAT is not set
-+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-+# CONFIG_USB_SERIAL_CP2101 is not set
-+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-+# CONFIG_USB_SERIAL_EMPEG is not set
-+# CONFIG_USB_SERIAL_FTDI_SIO is not set
-+# CONFIG_USB_SERIAL_FUNSOFT is not set
-+# CONFIG_USB_SERIAL_VISOR is not set
-+# CONFIG_USB_SERIAL_IPAQ is not set
-+# CONFIG_USB_SERIAL_IR is not set
-+# CONFIG_USB_SERIAL_EDGEPORT is not set
-+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-+# CONFIG_USB_SERIAL_GARMIN is not set
-+# CONFIG_USB_SERIAL_IPW is not set
-+# CONFIG_USB_SERIAL_IUU is not set
-+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-+# CONFIG_USB_SERIAL_KEYSPAN is not set
-+# CONFIG_USB_SERIAL_KLSI is not set
-+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-+# CONFIG_USB_SERIAL_MCT_U232 is not set
-+# CONFIG_USB_SERIAL_MOS7720 is not set
-+# CONFIG_USB_SERIAL_MOS7840 is not set
-+# CONFIG_USB_SERIAL_MOTOROLA is not set
-+# CONFIG_USB_SERIAL_NAVMAN is not set
-+CONFIG_USB_SERIAL_PL2303=m
-+# CONFIG_USB_SERIAL_OTI6858 is not set
-+# CONFIG_USB_SERIAL_SPCP8X5 is not set
-+# CONFIG_USB_SERIAL_HP4X is not set
-+# CONFIG_USB_SERIAL_SAFE is not set
-+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-+# CONFIG_USB_SERIAL_TI is not set
-+# CONFIG_USB_SERIAL_CYBERJACK is not set
-+# CONFIG_USB_SERIAL_XIRCOM is not set
-+# CONFIG_USB_SERIAL_OPTION is not set
-+# CONFIG_USB_SERIAL_OMNINET is not set
-+# CONFIG_USB_SERIAL_DEBUG is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_SISUSBVGA is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+CONFIG_USB_TEST=m
-+# CONFIG_USB_ISIGHTFW is not set
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG is not set
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+# CONFIG_USB_GADGET_DEBUG_FS is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA25X is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_PXA27X is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_USB_G_PRINTER is not set
-+# CONFIG_USB_CDC_COMPOSITE is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-+CONFIG_MMC_TEST=m
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+# CONFIG_MMC_SDHCI is not set
-+CONFIG_MMC_ATMELMCI=y
-+# CONFIG_MMC_ATMELMCI_DMA is not set
-+CONFIG_MMC_SPI=m
-+# CONFIG_MEMSTICK is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=m
-+
-+#
-+# LED drivers
-+#
-+CONFIG_LEDS_ATMEL_PWM=m
-+# CONFIG_LEDS_PCA9532 is not set
-+CONFIG_LEDS_GPIO=m
-+# CONFIG_LEDS_PCA955X is not set
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=m
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-+# CONFIG_ACCESSIBILITY is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-+# CONFIG_RTC_DRV_FM3130 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_M41T94 is not set
-+# CONFIG_RTC_DRV_DS1305 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1511 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+# CONFIG_RTC_DRV_AT32AP700X is not set
-+CONFIG_RTC_DRV_AVR32_AST=y
-+CONFIG_DMADEVICES=y
-+
-+#
-+# DMA Devices
-+#
-+CONFIG_ATMEL_PDCA=y
-+CONFIG_DW_DMAC=y
-+CONFIG_DMA_ENGINE=y
-+
-+#
-+# DMA Clients
-+#
-+# CONFIG_NET_DMA is not set
-+CONFIG_DMATEST=m
-+# CONFIG_UIO is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_DNOTIFY is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+CONFIG_FUSE_FS=m
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=m
-+CONFIG_MSDOS_FS=m
-+CONFIG_VFAT_FS=m
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_KCORE=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_CONFIGFS_FS=y
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+CONFIG_UBIFS_FS=y
-+CONFIG_UBIFS_FS_XATTR=y
-+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-+CONFIG_UBIFS_FS_LZO=y
-+CONFIG_UBIFS_FS_ZLIB=y
-+# CONFIG_UBIFS_FS_DEBUG is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+CONFIG_MINIX_FS=m
-+# CONFIG_OMFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+CONFIG_ROOT_NFS=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+CONFIG_NLS=m
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=m
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=m
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=m
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_FRAME_WARN=1024
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+CONFIG_DEBUG_FS=y
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_OBJECTS is not set
-+# CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_SLUB_STATS is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_WRITECOUNT is not set
-+# CONFIG_DEBUG_MEMORY_INIT is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_KPROBES_SANITY_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
-+# CONFIG_LKDTM is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_AEAD=m
-+CONFIG_CRYPTO_BLKCIPHER=m
-+CONFIG_CRYPTO_HASH=m
-+CONFIG_CRYPTO_MANAGER=m
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_AUTHENC=m
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=m
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+# CONFIG_CRYPTO_ECB is not set
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+CONFIG_CRYPTO_HMAC=m
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=m
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+CONFIG_CRYPTO_SHA1=m
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+CONFIG_CRYPTO_DES=m
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+CONFIG_CRYPTO_DEFLATE=y
-+CONFIG_CRYPTO_LZO=y
-+# CONFIG_CRYPTO_HW is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-+CONFIG_CRC_CCITT=m
-+CONFIG_CRC16=y
-+# CONFIG_CRC_T10DIF is not set
-+CONFIG_CRC_ITU_T=m
-+CONFIG_CRC32=y
-+CONFIG_CRC7=m
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_LZO_COMPRESS=y
-+CONFIG_LZO_DECOMPRESS=y
-+CONFIG_GENERIC_ALLOCATOR=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig
-index 8b6e54c..cee2884 100644
---- a/arch/avr32/configs/atstk1006_defconfig
-+++ b/arch/avr32/configs/atstk1006_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.27-rc1
--# Tue Aug 5 15:40:26 2008
-+# Linux kernel version: 2.6.27.4
-+# Fri Nov 7 10:25:15 2008
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -129,20 +129,24 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
- CONFIG_SUBARCH_AVR32B=y
- CONFIG_MMU=y
- CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PORTMUX_PIO=y
- CONFIG_PLATFORM_AT32AP=y
- CONFIG_CPU_AT32AP700X=y
- CONFIG_CPU_AT32AP7000=y
- CONFIG_BOARD_ATSTK1000=y
- # CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_FAVR_32 is not set
-+# CONFIG_BOARD_MIMC200 is not set
- # CONFIG_BOARD_ATSTK1002 is not set
- # CONFIG_BOARD_ATSTK1003 is not set
- # CONFIG_BOARD_ATSTK1004 is not set
-+# CONFIG_BOARD_ATSTK1005 is not set
- CONFIG_BOARD_ATSTK1006=y
- # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
- # CONFIG_BOARD_ATSTK100X_SPI1 is not set
--# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-+CONFIG_BOARD_ATSTK1000_J2_LED=y
- # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
--# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-+CONFIG_BOARD_ATSTK1000_J2_RGB=y
- CONFIG_BOARD_ATSTK1000_EXTDAC=y
- CONFIG_LOADER_U_BOOT=y
-
-@@ -186,7 +190,7 @@ CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
- # CONFIG_HZ_1000 is not set
- CONFIG_HZ=250
--# CONFIG_SCHED_HRTICK is not set
-+CONFIG_SCHED_HRTICK=y
- CONFIG_CMDLINE=""
-
- #
-@@ -360,7 +364,8 @@ CONFIG_MTD_CMDLINE_PARTS=y
- #
- CONFIG_MTD_CHAR=y
- CONFIG_MTD_BLKDEVS=y
--CONFIG_MTD_BLOCK=y
-+# CONFIG_MTD_BLOCK is not set
-+# CONFIG_MTD_BLOCK_RO is not set
- # CONFIG_FTL is not set
- # CONFIG_NFTL is not set
- # CONFIG_INFTL is not set
-@@ -422,7 +427,7 @@ CONFIG_M25PXX_USE_FAST_READ=y
- # CONFIG_MTD_DOC2001PLUS is not set
- CONFIG_MTD_NAND=y
- # CONFIG_MTD_NAND_VERIFY_WRITE is not set
--# CONFIG_MTD_NAND_ECC_SMC is not set
-+CONFIG_MTD_NAND_ECC_SMC=y
- # CONFIG_MTD_NAND_MUSEUM_IDS is not set
- CONFIG_MTD_NAND_IDS=y
- # CONFIG_MTD_NAND_DISKONCHIP is not set
-@@ -521,7 +526,7 @@ CONFIG_NETDEVICES=y
- # CONFIG_BONDING is not set
- # CONFIG_MACVLAN is not set
- # CONFIG_EQUALIZER is not set
--CONFIG_TUN=m
-+# CONFIG_TUN is not set
- # CONFIG_VETH is not set
- CONFIG_PHYLIB=y
-
-@@ -580,7 +585,7 @@ CONFIG_SLHC=m
- #
- # Input device support
- #
--CONFIG_INPUT=m
-+CONFIG_INPUT=y
- # CONFIG_INPUT_FF_MEMLESS is not set
- CONFIG_INPUT_POLLDEV=m
-
-@@ -609,6 +614,8 @@ CONFIG_KEYBOARD_GPIO=m
- CONFIG_INPUT_MOUSE=y
- # CONFIG_MOUSE_PS2 is not set
- # CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_APPLETOUCH is not set
-+# CONFIG_MOUSE_BCM5974 is not set
- # CONFIG_MOUSE_VSXXXAA is not set
- CONFIG_MOUSE_GPIO=m
- # CONFIG_INPUT_JOYSTICK is not set
-@@ -625,8 +632,12 @@ CONFIG_MOUSE_GPIO=m
- #
- # Character devices
- #
--# CONFIG_VT is not set
--# CONFIG_DEVKMEM is not set
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
- # CONFIG_SERIAL_NONSTANDARD is not set
-
- #
-@@ -653,6 +664,7 @@ CONFIG_UNIX98_PTYS=y
- CONFIG_I2C=m
- CONFIG_I2C_BOARDINFO=y
- CONFIG_I2C_CHARDEV=m
-+CONFIG_I2C_HELPER_AUTO=y
- CONFIG_I2C_ALGOBIT=m
-
- #
-@@ -702,6 +714,7 @@ CONFIG_SPI_MASTER=y
- #
- # SPI Master Controller Drivers
- #
-+CONFIG_SPI_ATMEL_HAVE_PDC=y
- CONFIG_SPI_ATMEL=y
- # CONFIG_SPI_BITBANG is not set
-
-@@ -744,7 +757,7 @@ CONFIG_WATCHDOG=y
- # Watchdog Device Drivers
- #
- # CONFIG_SOFT_WATCHDOG is not set
--CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32_WDT=y
-
- #
- # Sonics Silicon Backplane
-@@ -758,6 +771,7 @@ CONFIG_SSB_POSSIBLE=y
- # CONFIG_MFD_CORE is not set
- # CONFIG_MFD_SM501 is not set
- # CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-
- #
- # Multimedia devices
-@@ -803,6 +817,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
- #
- # CONFIG_FB_S1D13XXX is not set
- CONFIG_FB_ATMEL=y
-+# CONFIG_FB_ATMEL_MPOP is not set
- # CONFIG_FB_VIRTUAL is not set
- CONFIG_BACKLIGHT_LCD_SUPPORT=y
- CONFIG_LCD_CLASS_DEVICE=y
-@@ -816,6 +831,12 @@ CONFIG_LCD_LTV350QV=y
- # Display device support
- #
- # CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE is not set
- # CONFIG_LOGO is not set
- CONFIG_SOUND=m
- CONFIG_SND=m
-@@ -831,11 +852,7 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
- # CONFIG_SND_VERBOSE_PROCFS is not set
- # CONFIG_SND_VERBOSE_PRINTK is not set
- # CONFIG_SND_DEBUG is not set
--CONFIG_SND_DRIVERS=y
--# CONFIG_SND_DUMMY is not set
--# CONFIG_SND_MTPAV is not set
--# CONFIG_SND_SERIAL_U16550 is not set
--# CONFIG_SND_MPU401 is not set
-+# CONFIG_SND_DRIVERS is not set
- CONFIG_SND_SPI=y
- CONFIG_SND_AT73C213=m
- CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-@@ -843,11 +860,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
- # CONFIG_SOUND_PRIME is not set
- # CONFIG_HID_SUPPORT is not set
- CONFIG_USB_SUPPORT=y
--# CONFIG_USB_ARCH_HAS_HCD is not set
--# CONFIG_USB_ARCH_HAS_OHCI is not set
--# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+# CONFIG_USB is not set
- # CONFIG_USB_OTG_WHITELIST is not set
- # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+# CONFIG_USB_MUSB_HDRC is not set
-+# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-@@ -881,7 +901,7 @@ CONFIG_USB_FILE_STORAGE=m
- CONFIG_USB_G_SERIAL=m
- # CONFIG_USB_MIDI_GADGET is not set
- # CONFIG_USB_G_PRINTER is not set
--# CONFIG_USB_CDC_COMPOSITE is not set
-+CONFIG_USB_CDC_COMPOSITE=m
- CONFIG_MMC=y
- # CONFIG_MMC_DEBUG is not set
- # CONFIG_MMC_UNSAFE_RESUME is not set
-@@ -899,6 +919,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
- #
- # CONFIG_MMC_SDHCI is not set
- CONFIG_MMC_ATMELMCI=y
-+# CONFIG_MMC_ATMELMCI_DMA is not set
- CONFIG_MMC_SPI=m
- # CONFIG_MEMSTICK is not set
- CONFIG_NEW_LEDS=y
-@@ -975,11 +996,13 @@ CONFIG_RTC_INTF_DEV=y
- # on-CPU RTC drivers
- #
- CONFIG_RTC_DRV_AT32AP700X=y
-+# CONFIG_RTC_DRV_AVR32_AST is not set
- CONFIG_DMADEVICES=y
-
- #
- # DMA Devices
- #
-+# CONFIG_ATMEL_PDCA is not set
- CONFIG_DW_DMAC=y
- CONFIG_DMA_ENGINE=y
-
-@@ -993,13 +1016,13 @@ CONFIG_DMATEST=m
- #
- # File systems
- #
--CONFIG_EXT2_FS=m
-+CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
--CONFIG_EXT3_FS=m
-+CONFIG_EXT3_FS=y
- # CONFIG_EXT3_FS_XATTR is not set
- # CONFIG_EXT4DEV_FS is not set
--CONFIG_JBD=m
-+CONFIG_JBD=y
- # CONFIG_JBD_DEBUG is not set
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
-@@ -1040,7 +1063,7 @@ CONFIG_SYSFS=y
- CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--# CONFIG_CONFIGFS_FS is not set
-+CONFIG_CONFIGFS_FS=y
-
- #
- # Miscellaneous filesystems
-@@ -1054,7 +1077,8 @@ CONFIG_TMPFS=y
- # CONFIG_EFS_FS is not set
- CONFIG_JFFS2_FS=y
- CONFIG_JFFS2_FS_DEBUG=0
--# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
- # CONFIG_JFFS2_SUMMARY is not set
- # CONFIG_JFFS2_FS_XATTR is not set
- # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig
-new file mode 100644
-index 0000000..e2bd998
---- /dev/null
-+++ b/arch/avr32/configs/favr-32_defconfig
-@@ -0,0 +1,1235 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.27-rc8
-+# Tue Oct 14 13:20:41 2008
-+#
-+CONFIG_AVR32=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_GENERIC_BUG=y
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+# CONFIG_GROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+CONFIG_RELAY=y
-+# CONFIG_NAMESPACES is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+# CONFIG_SYSCTL_SYSCALL is not set
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+# CONFIG_COMPAT_BRK is not set
-+# CONFIG_BASE_FULL is not set
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLUB_DEBUG=y
-+# CONFIG_SLAB is not set
-+CONFIG_SLUB=y
-+# CONFIG_SLOB is not set
-+CONFIG_PROFILING=y
-+# CONFIG_MARKERS is not set
-+CONFIG_OPROFILE=m
-+CONFIG_HAVE_OPROFILE=y
-+CONFIG_KPROBES=y
-+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-+# CONFIG_HAVE_IOREMAP_PROT is not set
-+CONFIG_HAVE_KPROBES=y
-+# CONFIG_HAVE_KRETPROBES is not set
-+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-+# CONFIG_HAVE_DMA_ATTRS is not set
-+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-+CONFIG_HAVE_CLK=y
-+CONFIG_PROC_PAGE_MONITOR=y
-+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=1
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_KMOD=y
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_BLK_DEV_INTEGRITY is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+# CONFIG_IOSCHED_AS is not set
-+# CONFIG_IOSCHED_DEADLINE is not set
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
-+
-+#
-+# System Type and features
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+CONFIG_SUBARCH_AVR32B=y
-+CONFIG_MMU=y
-+CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PLATFORM_AT32AP=y
-+CONFIG_CPU_AT32AP700X=y
-+CONFIG_CPU_AT32AP7000=y
-+# CONFIG_BOARD_ATSTK1000 is not set
-+# CONFIG_BOARD_ATNGW100 is not set
-+CONFIG_BOARD_FAVR_32=y
-+# CONFIG_BOARD_MIMC200 is not set
-+CONFIG_BOARD_FAVR32_ABDAC_RATE=44100
-+CONFIG_LOADER_U_BOOT=y
-+
-+#
-+# Atmel AVR32 AP options
-+#
-+# CONFIG_AP700X_32_BIT_SMC is not set
-+CONFIG_AP700X_16_BIT_SMC=y
-+# CONFIG_AP700X_8_BIT_SMC is not set
-+CONFIG_LOAD_ADDRESS=0x10000000
-+CONFIG_ENTRY_ADDRESS=0x90000000
-+CONFIG_PHYS_OFFSET=0x10000000
-+CONFIG_PREEMPT_NONE=y
-+# CONFIG_PREEMPT_VOLUNTARY is not set
-+# CONFIG_PREEMPT is not set
-+CONFIG_QUICKLIST=y
-+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-+CONFIG_ARCH_FLATMEM_ENABLE=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=0
-+CONFIG_NR_QUICK=2
-+CONFIG_VIRT_TO_BUS=y
-+# CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_NMI_DEBUGGING=y
-+# CONFIG_HZ_100 is not set
-+CONFIG_HZ_250=y
-+# CONFIG_HZ_300 is not set
-+# CONFIG_HZ_1000 is not set
-+CONFIG_HZ=250
-+CONFIG_SCHED_HRTICK=y
-+CONFIG_CMDLINE=""
-+
-+#
-+# Power management options
-+#
-+CONFIG_PM=y
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+
-+#
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+# CONFIG_CPU_FREQ_STAT is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-+
-+#
-+# Bus options
-+#
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Executable file formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_MISC is not set
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+CONFIG_XFRM_USER=m
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_XFRM_IPCOMP=m
-+CONFIG_NET_KEY=m
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+CONFIG_NET_IPIP=m
-+CONFIG_NET_IPGRE=m
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+CONFIG_INET_AH=m
-+CONFIG_INET_ESP=m
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+CONFIG_INET_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET_XFRM_MODE_TUNNEL=m
-+CONFIG_INET_XFRM_MODE_BEET=m
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+CONFIG_IPV6=y
-+# CONFIG_IPV6_PRIVACY is not set
-+# CONFIG_IPV6_ROUTER_PREF is not set
-+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-+CONFIG_INET6_AH=m
-+CONFIG_INET6_ESP=m
-+CONFIG_INET6_IPCOMP=m
-+# CONFIG_IPV6_MIP6 is not set
-+CONFIG_INET6_XFRM_TUNNEL=m
-+CONFIG_INET6_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-+CONFIG_INET6_XFRM_MODE_TUNNEL=m
-+CONFIG_INET6_XFRM_MODE_BEET=m
-+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-+CONFIG_IPV6_SIT=m
-+CONFIG_IPV6_NDISC_NODETYPE=y
-+CONFIG_IPV6_TUNNEL=m
-+# CONFIG_IPV6_MULTIPLE_TABLES is not set
-+# CONFIG_IPV6_MROUTE is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+CONFIG_STP=m
-+CONFIG_BRIDGE=m
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+CONFIG_LLC=m
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_NET_TCPPROBE is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+CONFIG_STANDALONE=y
-+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_CFI_INTELEXT is not set
-+CONFIG_MTD_CFI_AMDSTD=y
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x8000000
-+CONFIG_MTD_PHYSMAP_LEN=0x0
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_DATAFLASH is not set
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+# CONFIG_MTD_NAND is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=m
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+CONFIG_BLK_DEV_NBD=m
-+CONFIG_BLK_DEV_RAM=m
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=4096
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+CONFIG_ATMEL_PWM=m
-+CONFIG_ATMEL_TCLIB=y
-+CONFIG_ATMEL_TCB_CLKSRC=y
-+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-+# CONFIG_EEPROM_93CX6 is not set
-+CONFIG_ATMEL_SSC=m
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_HAVE_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+# CONFIG_SCSI is not set
-+# CONFIG_SCSI_DMA is not set
-+# CONFIG_SCSI_NETLINK is not set
-+# CONFIG_ATA is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+# CONFIG_MII is not set
-+CONFIG_MACB=y
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+# CONFIG_WAN is not set
-+CONFIG_PPP=m
-+# CONFIG_PPP_MULTILINK is not set
-+# CONFIG_PPP_FILTER is not set
-+CONFIG_PPP_ASYNC=m
-+# CONFIG_PPP_SYNC_TTY is not set
-+CONFIG_PPP_DEFLATE=m
-+CONFIG_PPP_BSDCOMP=m
-+# CONFIG_PPP_MPPE is not set
-+# CONFIG_PPPOE is not set
-+# CONFIG_PPPOL2TP is not set
-+# CONFIG_SLIP is not set
-+CONFIG_SLHC=m
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+CONFIG_INPUT_POLLDEV=m
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=m
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=m
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+CONFIG_KEYBOARD_GPIO=m
-+CONFIG_INPUT_MOUSE=y
-+# CONFIG_MOUSE_PS2 is not set
-+# CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_VSXXXAA is not set
-+CONFIG_MOUSE_GPIO=m
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+CONFIG_INPUT_TOUCHSCREEN=y
-+CONFIG_TOUCHSCREEN_ADS7846=m
-+# CONFIG_TOUCHSCREEN_FUJITSU is not set
-+# CONFIG_TOUCHSCREEN_GUNZE is not set
-+# CONFIG_TOUCHSCREEN_ELO is not set
-+# CONFIG_TOUCHSCREEN_MTOUCH is not set
-+# CONFIG_TOUCHSCREEN_INEXIO is not set
-+# CONFIG_TOUCHSCREEN_MK712 is not set
-+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-+# CONFIG_TOUCHSCREEN_UCB1400 is not set
-+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+# CONFIG_CONSOLE_TRANSLATIONS is not set
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+# CONFIG_DEVKMEM is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+CONFIG_SERIAL_ATMEL_PDC=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
-+CONFIG_I2C_HELPER_AUTO=y
-+CONFIG_I2C_ALGOBIT=m
-+
-+#
-+# I2C Hardware Bus support
-+#
-+
-+#
-+# I2C system bus drivers (mostly embedded / system-on-chip)
-+#
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_SIMTEC is not set
-+
-+#
-+# External I2C/SMBus adapter drivers
-+#
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+
-+#
-+# Other I2C/SMBus bus drivers
-+#
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_AT24 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+CONFIG_SPI_SPIDEV=m
-+# CONFIG_SPI_TLE62X0 is not set
-+CONFIG_ARCH_REQUIRE_GPIOLIB=y
-+CONFIG_GPIOLIB=y
-+# CONFIG_DEBUG_GPIO is not set
-+CONFIG_GPIO_SYSFS=y
-+
-+#
-+# I2C GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX732X is not set
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-+
-+#
-+# PCI GPIO expanders:
-+#
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX7301 is not set
-+# CONFIG_GPIO_MCP23S08 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+# CONFIG_THERMAL_HWMON is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_CORE is not set
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-+
-+#
-+# Multimedia devices
-+#
-+
-+#
-+# Multimedia core support
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_VIDEO_MEDIA is not set
-+
-+#
-+# Multimedia drivers
-+#
-+# CONFIG_DAB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_FOREIGN_ENDIAN is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_ATMEL=y
-+# CONFIG_FB_VIRTUAL is not set
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+# CONFIG_LCD_CLASS_DEVICE is not set
-+CONFIG_BACKLIGHT_CLASS_DEVICE=m
-+# CONFIG_BACKLIGHT_ATMEL_LCDC is not set
-+CONFIG_BACKLIGHT_ATMEL_PWM=m
-+# CONFIG_BACKLIGHT_CORGI is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE is not set
-+# CONFIG_LOGO is not set
-+CONFIG_SOUND=m
-+# CONFIG_SND is not set
-+CONFIG_SOUND_PRIME=m
-+# CONFIG_HID_SUPPORT is not set
-+CONFIG_USB_SUPPORT=y
-+# CONFIG_USB_ARCH_HAS_HCD is not set
-+# CONFIG_USB_ARCH_HAS_OHCI is not set
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+# CONFIG_USB_OTG_WHITELIST is not set
-+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+# CONFIG_USB_MUSB_HDRC is not set
-+# CONFIG_USB_GADGET_MUSB_HDRC is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG is not set
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+# CONFIG_USB_GADGET_DEBUG_FS is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA25X is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_PXA27X is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_USB_G_PRINTER is not set
-+CONFIG_USB_CDC_COMPOSITE=m
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-+# CONFIG_MMC_TEST is not set
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+# CONFIG_MMC_SDHCI is not set
-+CONFIG_MMC_ATMELMCI=y
-+CONFIG_MMC_ATMELMCI_DMA=y
-+# CONFIG_MMC_SPI is not set
-+# CONFIG_MEMSTICK is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-+
-+#
-+# LED drivers
-+#
-+CONFIG_LEDS_ATMEL_PWM=m
-+# CONFIG_LEDS_PCA9532 is not set
-+CONFIG_LEDS_GPIO=y
-+# CONFIG_LEDS_PCA955X is not set
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-+# CONFIG_ACCESSIBILITY is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-+# CONFIG_RTC_DRV_FM3130 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_M41T94 is not set
-+# CONFIG_RTC_DRV_DS1305 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1511 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT32AP700X=y
-+CONFIG_DMADEVICES=y
-+
-+#
-+# DMA Devices
-+#
-+CONFIG_DW_DMAC=y
-+CONFIG_DMA_ENGINE=y
-+
-+#
-+# DMA Clients
-+#
-+# CONFIG_NET_DMA is not set
-+# CONFIG_DMATEST is not set
-+# CONFIG_UIO is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_DNOTIFY is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+CONFIG_FUSE_FS=m
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=m
-+CONFIG_MSDOS_FS=m
-+CONFIG_VFAT_FS=m
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_KCORE=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_CONFIGFS_FS=y
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_OMFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+CONFIG_ROOT_NFS=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+CONFIG_NLS=m
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=m
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=m
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=m
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_FRAME_WARN=1024
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+CONFIG_DEBUG_FS=y
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_OBJECTS is not set
-+# CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_SLUB_STATS is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_WRITECOUNT is not set
-+# CONFIG_DEBUG_MEMORY_INIT is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_KPROBES_SANITY_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
-+# CONFIG_LKDTM is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+CONFIG_CRYPTO_ALGAPI=m
-+CONFIG_CRYPTO_AEAD=m
-+CONFIG_CRYPTO_BLKCIPHER=m
-+CONFIG_CRYPTO_HASH=m
-+CONFIG_CRYPTO_MANAGER=m
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_AUTHENC=m
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=m
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+# CONFIG_CRYPTO_ECB is not set
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+CONFIG_CRYPTO_HMAC=m
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=m
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+CONFIG_CRYPTO_SHA1=m
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+CONFIG_CRYPTO_DES=m
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+CONFIG_CRYPTO_DEFLATE=m
-+# CONFIG_CRYPTO_LZO is not set
-+# CONFIG_CRYPTO_HW is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-+CONFIG_CRC_CCITT=m
-+# CONFIG_CRC16 is not set
-+# CONFIG_CRC_T10DIF is not set
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_GENERIC_ALLOCATOR=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff --git a/arch/avr32/configs/mimc200_defconfig b/arch/avr32/configs/mimc200_defconfig
-new file mode 100644
-index 0000000..981e4f8
---- /dev/null
-+++ b/arch/avr32/configs/mimc200_defconfig
-@@ -0,0 +1,1109 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.27-rc8
-+# Mon Oct 13 15:46:53 2008
-+#
-+CONFIG_AVR32=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_GENERIC_BUG=y
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
-+CONFIG_BSD_PROCESS_ACCT=y
-+CONFIG_BSD_PROCESS_ACCT_V3=y
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+# CONFIG_GROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
-+# CONFIG_NAMESPACES is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+# CONFIG_SYSCTL_SYSCALL is not set
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+# CONFIG_COMPAT_BRK is not set
-+# CONFIG_BASE_FULL is not set
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLUB_DEBUG=y
-+# CONFIG_SLAB is not set
-+CONFIG_SLUB=y
-+# CONFIG_SLOB is not set
-+CONFIG_PROFILING=y
-+# CONFIG_MARKERS is not set
-+# CONFIG_OPROFILE is not set
-+CONFIG_HAVE_OPROFILE=y
-+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-+# CONFIG_HAVE_IOREMAP_PROT is not set
-+CONFIG_HAVE_KPROBES=y
-+# CONFIG_HAVE_KRETPROBES is not set
-+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-+# CONFIG_HAVE_DMA_ATTRS is not set
-+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-+CONFIG_HAVE_CLK=y
-+CONFIG_PROC_PAGE_MONITOR=y
-+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=1
-+# CONFIG_MODULES is not set
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_BLK_DEV_INTEGRITY is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+# CONFIG_IOSCHED_AS is not set
-+# CONFIG_IOSCHED_DEADLINE is not set
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
-+
-+#
-+# System Type and features
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+CONFIG_SUBARCH_AVR32B=y
-+CONFIG_MMU=y
-+CONFIG_PERFORMANCE_COUNTERS=y
-+CONFIG_PLATFORM_AT32AP=y
-+CONFIG_CPU_AT32AP700X=y
-+CONFIG_CPU_AT32AP7000=y
-+# CONFIG_BOARD_ATSTK1000 is not set
-+# CONFIG_BOARD_ATNGW100 is not set
-+CONFIG_BOARD_MIMC200=y
-+CONFIG_LOADER_U_BOOT=y
-+
-+#
-+# Atmel AVR32 AP options
-+#
-+# CONFIG_AP700X_32_BIT_SMC is not set
-+CONFIG_AP700X_16_BIT_SMC=y
-+# CONFIG_AP700X_8_BIT_SMC is not set
-+CONFIG_LOAD_ADDRESS=0x10000000
-+CONFIG_ENTRY_ADDRESS=0x90000000
-+CONFIG_PHYS_OFFSET=0x10000000
-+CONFIG_PREEMPT_NONE=y
-+# CONFIG_PREEMPT_VOLUNTARY is not set
-+# CONFIG_PREEMPT is not set
-+CONFIG_QUICKLIST=y
-+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-+CONFIG_ARCH_FLATMEM_ENABLE=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=0
-+CONFIG_NR_QUICK=2
-+CONFIG_VIRT_TO_BUS=y
-+# CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_NMI_DEBUGGING=y
-+# CONFIG_HZ_100 is not set
-+CONFIG_HZ_250=y
-+# CONFIG_HZ_300 is not set
-+# CONFIG_HZ_1000 is not set
-+CONFIG_HZ=250
-+CONFIG_SCHED_HRTICK=y
-+CONFIG_CMDLINE=""
-+
-+#
-+# Power management options
-+#
-+CONFIG_PM=y
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+
-+#
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+# CONFIG_CPU_FREQ_STAT is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-+
-+#
-+# Bus options
-+#
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Executable file formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_MISC is not set
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+CONFIG_XFRM_USER=y
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_XFRM_IPCOMP=y
-+CONFIG_NET_KEY=y
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+# CONFIG_IP_MULTIPLE_TABLES is not set
-+# CONFIG_IP_ROUTE_MULTIPATH is not set
-+# CONFIG_IP_ROUTE_VERBOSE is not set
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+CONFIG_IP_MROUTE=y
-+CONFIG_IP_PIMSM_V1=y
-+# CONFIG_IP_PIMSM_V2 is not set
-+# CONFIG_ARPD is not set
-+CONFIG_SYN_COOKIES=y
-+CONFIG_INET_AH=y
-+CONFIG_INET_ESP=y
-+CONFIG_INET_IPCOMP=y
-+CONFIG_INET_XFRM_TUNNEL=y
-+CONFIG_INET_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+CONFIG_IPV6=y
-+# CONFIG_IPV6_PRIVACY is not set
-+# CONFIG_IPV6_ROUTER_PREF is not set
-+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-+CONFIG_INET6_AH=y
-+CONFIG_INET6_ESP=y
-+CONFIG_INET6_IPCOMP=y
-+# CONFIG_IPV6_MIP6 is not set
-+CONFIG_INET6_XFRM_TUNNEL=y
-+CONFIG_INET6_TUNNEL=y
-+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET6_XFRM_MODE_TUNNEL=y
-+CONFIG_INET6_XFRM_MODE_BEET=y
-+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-+CONFIG_IPV6_SIT=y
-+CONFIG_IPV6_NDISC_NODETYPE=y
-+# CONFIG_IPV6_TUNNEL is not set
-+# CONFIG_IPV6_MULTIPLE_TABLES is not set
-+# CONFIG_IPV6_MROUTE is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+CONFIG_STANDALONE=y
-+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_CFI_INTELEXT is not set
-+CONFIG_MTD_CFI_AMDSTD=y
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x80000000
-+CONFIG_MTD_PHYSMAP_LEN=0x0
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+CONFIG_MTD_DATAFLASH=y
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+# CONFIG_MTD_NAND is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+# CONFIG_BLK_DEV_LOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_RAM is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_ATMEL_PWM is not set
-+CONFIG_ATMEL_TCLIB=y
-+CONFIG_ATMEL_TCB_CLKSRC=y
-+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-+# CONFIG_EEPROM_93CX6 is not set
-+# CONFIG_ATMEL_SSC is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_HAVE_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+# CONFIG_SCSI is not set
-+# CONFIG_SCSI_DMA is not set
-+# CONFIG_SCSI_NETLINK is not set
-+# CONFIG_ATA is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_ICPLUS_PHY is not set
-+# CONFIG_REALTEK_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-+# CONFIG_MDIO_BITBANG is not set
-+CONFIG_NET_ETHERNET=y
-+# CONFIG_MII is not set
-+CONFIG_MACB=y
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+# CONFIG_INPUT is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+# CONFIG_VT is not set
-+# CONFIG_DEVKMEM is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+CONFIG_SERIAL_ATMEL_PDC=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=y
-+CONFIG_I2C_HELPER_AUTO=y
-+CONFIG_I2C_ALGOBIT=y
-+
-+#
-+# I2C Hardware Bus support
-+#
-+
-+#
-+# I2C system bus drivers (mostly embedded / system-on-chip)
-+#
-+CONFIG_I2C_GPIO=y
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_SIMTEC is not set
-+
-+#
-+# External I2C/SMBus adapter drivers
-+#
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+
-+#
-+# Other I2C/SMBus bus drivers
-+#
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+CONFIG_AT24=y
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_DS28CM00 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+CONFIG_SPI_AT25=y
-+# CONFIG_SPI_SPIDEV is not set
-+# CONFIG_SPI_TLE62X0 is not set
-+CONFIG_ARCH_REQUIRE_GPIOLIB=y
-+CONFIG_GPIOLIB=y
-+# CONFIG_DEBUG_GPIO is not set
-+CONFIG_GPIO_SYSFS=y
-+
-+#
-+# I2C GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX732X is not set
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-+
-+#
-+# PCI GPIO expanders:
-+#
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX7301 is not set
-+# CONFIG_GPIO_MCP23S08 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+# CONFIG_THERMAL_HWMON is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_CORE is not set
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_HTC_PASIC3 is not set
-+# CONFIG_MFD_TMIO is not set
-+
-+#
-+# Multimedia devices
-+#
-+
-+#
-+# Multimedia core support
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_VIDEO_MEDIA is not set
-+
-+#
-+# Multimedia drivers
-+#
-+# CONFIG_DAB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_FOREIGN_ENDIAN is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_ATMEL=y
-+# CONFIG_FB_VIRTUAL is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+# CONFIG_LOGO is not set
-+# CONFIG_SOUND is not set
-+# CONFIG_USB_SUPPORT is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-+CONFIG_MMC_TEST=y
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+# CONFIG_MMC_SDHCI is not set
-+CONFIG_MMC_ATMELMCI=y
-+# CONFIG_MMC_ATMELMCI_DMA is not set
-+CONFIG_MMC_SPI=y
-+# CONFIG_MEMSTICK is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-+
-+#
-+# LED drivers
-+#
-+CONFIG_LEDS_GPIO=y
-+# CONFIG_LEDS_PCA955X is not set
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-+# CONFIG_ACCESSIBILITY is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-+# CONFIG_RTC_DRV_FM3130 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_M41T94 is not set
-+# CONFIG_RTC_DRV_DS1305 is not set
-+CONFIG_RTC_DRV_DS1390=y
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1511 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+# CONFIG_RTC_DRV_AT32AP700X is not set
-+CONFIG_DMADEVICES=y
-+
-+#
-+# DMA Devices
-+#
-+CONFIG_DW_DMAC=y
-+CONFIG_DMA_ENGINE=y
-+
-+#
-+# DMA Clients
-+#
-+# CONFIG_NET_DMA is not set
-+# CONFIG_DMATEST is not set
-+# CONFIG_UIO is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_DNOTIFY is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=850
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+# CONFIG_PROC_KCORE is not set
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_CONFIGFS_FS=y
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_OMFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+CONFIG_ROOT_NFS=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+CONFIG_NLS_CODEPAGE_850=y
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=y
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_FRAME_WARN=1024
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_OBJECTS is not set
-+# CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_SLUB_STATS is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_WRITECOUNT is not set
-+# CONFIG_DEBUG_MEMORY_INIT is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_AEAD=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_MANAGER=y
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+CONFIG_CRYPTO_AUTHENC=y
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=y
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+CONFIG_CRYPTO_ECB=y
-+# CONFIG_CRYPTO_LRW is not set
-+CONFIG_CRYPTO_PCBC=y
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+CONFIG_CRYPTO_HMAC=y
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+CONFIG_CRYPTO_SHA1=y
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+CONFIG_CRYPTO_ARC4=y
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+CONFIG_CRYPTO_DEFLATE=y
-+# CONFIG_CRYPTO_LZO is not set
-+CONFIG_CRYPTO_HW=y
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-+CONFIG_CRC_CCITT=y
-+# CONFIG_CRC16 is not set
-+# CONFIG_CRC_T10DIF is not set
-+CONFIG_CRC_ITU_T=y
-+CONFIG_CRC32=y
-+CONFIG_CRC7=y
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_GENERIC_ALLOCATOR=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff --git a/arch/avr32/include/asm/ast_regs.h b/arch/avr32/include/asm/ast_regs.h
-new file mode 100644
-index 0000000..2e2cfb9
---- /dev/null
-+++ b/arch/avr32/include/asm/ast_regs.h
-@@ -0,0 +1,88 @@
-+/*
-+ * Register definitions for the Asynchronous Timer (AST)
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __AST_REGS_H__
-+#define __AST_REGS_H__
-+
-+/* Control Register */
-+#define AST_CR 0x0000
-+# define AST_CR_EN_BIT 0 /* Enable */
-+# define AST_CR_PCLR_BIT 1 /* Prescaler Clear */
-+# define AST_CR_CA0_BIT 8 /* Clear on Alarm */
-+# define AST_CR_CA1_BIT 9
-+# define AST_CR_PSEL_START 16 /* Prescale Select */
-+# define AST_CR_PSEL_SIZE 4
-+
-+/* Counter Value */
-+#define AST_CV 0x0004
-+
-+/* Status, Status Clear, Interrupt Enable/Disable/Mask, Wake Enable */
-+#define AST_SR 0x0008
-+#define AST_SCR 0x000c
-+#define AST_IER 0x0010
-+#define AST_IDR 0x0014
-+#define AST_IMR 0x0018
-+#define AST_WER 0x001c
-+# define AST_OVF_BIT 0 /* Overflow */
-+# define AST_ALARM0_BIT 8 /* Alarm event */
-+# define AST_ALARM1_BIT 9
-+# define AST_PER0_BIT 16 /* Periodic event */
-+# define AST_PER1_BIT 17
-+# define AST_BUSY_BIT 24 /* AST busy */
-+# define AST_READY_BIT 25 /* BUSY 1 -> 0 event */
-+# define AST_CLK_BUSY_BIT 28 /* CLOCK busy */
-+# define AST_CLK_READY_BIT 29 /* CKL_BUSY 1 -> 0 event */
-+
-+/* Alarm registers */
-+#define AST_AR0 0x0020
-+#define AST_AR1 0x0024
-+
-+/* Periodic Interval registers */
-+#define AST_PIR0 0x0030
-+#define AST_PIR1 0x0034
-+# define AST_PIRx_INSEL_START 0 /* Interval select */
-+# define AST_PIRx_INSEL_SIZE 4
-+
-+/* Clock Select register */
-+#define AST_CLOCK 0x0040
-+# define AST_CLOCK_CEN_BIT 0 /* Clock Enable */
-+# define AST_CLOCK_CSSEL_START 8 /* Clock Source */
-+# define AST_CLOCK_CSSEL_SIZE 2
-+# define AST_CLOCK_SLOW 0 /* RC oscillator */
-+# define AST_CLOCK_OSC32 1 /* 32 kHz oscillator */
-+# define AST_CLOCK_PB 2 /* Peripheral Bus clock */
-+# define AST_CLOCK_GC 3 /* Generic clock */
-+
-+/* Version register */
-+#define AST_VERSION 0x00fc
-+
-+/* Bit manipulation macros */
-+#define AST_BIT(name) \
-+ (1 << AST_##name##_BIT)
-+#define AST_BF(name,value) \
-+ (((value) & ((1 << AST_##name##_SIZE) - 1)) \
-+ << AST_##name##_START)
-+#define AST_BFEXT(name,value) \
-+ (((value) >> AST_##name##_START) \
-+ & ((1 << AST_##name##_SIZE) - 1))
-+#define AST_BFINS(name,value,old) \
-+ (((old) & ~(((1 << AST_##name##_SIZE) - 1) \
-+ << AST_##name##_START)) \
-+ | AST_BF(name,value))
-+
-+/* Register access macros */
-+#define ast_readl(base, reg) \
-+ __raw_readl(base + AST_##reg)
-+#define ast_writel(base, reg, value) \
-+ __raw_writel(value, base + AST_##reg)
-+
-+struct platform_device;
-+void ast_time_init(struct platform_device *pdev, unsigned int clksel);
-+
-+#endif /* __AST_REGS_H__ */
-diff --git a/arch/avr32/include/asm/atmel-mci.h b/arch/avr32/include/asm/atmel-mci.h
-index c2ea6e1..59f3fad 100644
---- a/arch/avr32/include/asm/atmel-mci.h
-+++ b/arch/avr32/include/asm/atmel-mci.h
-@@ -1,9 +1,39 @@
- #ifndef __ASM_AVR32_ATMEL_MCI_H
- #define __ASM_AVR32_ATMEL_MCI_H
-
--struct mci_platform_data {
-+#define ATMEL_MCI_MAX_NR_SLOTS 2
-+
-+struct dma_slave;
-+
-+/**
-+ * struct mci_slot_pdata - board-specific per-slot configuration
-+ * @bus_width: Number of data lines wired up the slot
-+ * @detect_pin: GPIO pin wired to the card detect switch
-+ * @wp_pin: GPIO pin wired to the write protect sensor
-+ *
-+ * If a given slot is not present on the board, @bus_width should be
-+ * set to 0. The other fields are ignored in this case.
-+ *
-+ * Any pins that aren't available should be set to a negative value.
-+ *
-+ * Note that support for multiple slots is experimental -- some cards
-+ * might get upset if we don't get the clock management exactly right.
-+ * But in most cases, it should work just fine.
-+ */
-+struct mci_slot_pdata {
-+ unsigned int bus_width;
- int detect_pin;
- int wp_pin;
- };
-
-+/**
-+ * struct mci_platform_data - board-specific MMC/SDcard configuration
-+ * @dma_slave: DMA slave interface to use in data transfers, or NULL.
-+ * @slot: Per-slot configuration data.
-+ */
-+struct mci_platform_data {
-+ struct dma_slave *dma_slave;
-+ struct mci_slot_pdata slot[ATMEL_MCI_MAX_NR_SLOTS];
-+};
-+
- #endif /* __ASM_AVR32_ATMEL_MCI_H */
-diff --git a/arch/avr32/include/asm/byteorder.h b/arch/avr32/include/asm/byteorder.h
-index d77b48b..8e3af02 100644
---- a/arch/avr32/include/asm/byteorder.h
-+++ b/arch/avr32/include/asm/byteorder.h
-@@ -7,6 +7,9 @@
- #include <asm/types.h>
- #include <linux/compiler.h>
-
-+#define __BIG_ENDIAN
-+#define __SWAB_64_THRU_32__
-+
- #ifdef __CHECKER__
- extern unsigned long __builtin_bswap_32(unsigned long x);
- extern unsigned short __builtin_bswap_16(unsigned short x);
-@@ -17,15 +20,18 @@ extern unsigned short __builtin_bswap_16(unsigned short x);
- * the result.
- */
- #if !(__GNUC__ == 4 && __GNUC_MINOR__ < 2)
--#define __arch__swab32(x) __builtin_bswap_32(x)
--#define __arch__swab16(x) __builtin_bswap_16(x)
--#endif
-+static inline __attribute_const__ __u16 __arch_swab16(__u16 val)
-+{
-+ return __builtin_bswap_16(val);
-+}
-+#define __arch_swab16 __arch_swab16
-
--#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
--# define __BYTEORDER_HAS_U64__
--# define __SWAB_64_THRU_32__
-+static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
-+{
-+ return __builtin_bswap_32(val);
-+}
-+#define __arch_swab32 __arch_swab32
- #endif
-
--#include <linux/byteorder/big_endian.h>
--
-+#include <linux/byteorder.h>
- #endif /* __ASM_AVR32_BYTEORDER_H */
-diff --git a/arch/avr32/include/asm/io.h b/arch/avr32/include/asm/io.h
-index a520f77..22c97ef 100644
---- a/arch/avr32/include/asm/io.h
-+++ b/arch/avr32/include/asm/io.h
-@@ -160,6 +160,14 @@ BUILDIO_IOPORT(l, u32)
- #define readw_relaxed readw
- #define readl_relaxed readl
-
-+#define readb_be __raw_readb
-+#define readw_be __raw_readw
-+#define readl_be __raw_readl
-+
-+#define writeb_be __raw_writeb
-+#define writew_be __raw_writew
-+#define writel_be __raw_writel
-+
- #define __BUILD_MEMORY_STRING(bwl, type) \
- static inline void writes##bwl(volatile void __iomem *addr, \
- const void *data, unsigned int count) \
-diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c
-index e84faff..f2c0cb1 100644
---- a/arch/avr32/kernel/cpu.c
-+++ b/arch/avr32/kernel/cpu.c
-@@ -208,6 +208,7 @@ struct chip_id_map {
-
- static const struct chip_id_map chip_names[] = {
- { .mid = 0x1f, .pn = 0x1e82, .name = "AT32AP700x" },
-+ { .mid = 0x1f, .pn = 0x1e83, .name = "AT32AP720x" },
- };
- #define NR_CHIP_NAMES ARRAY_SIZE(chip_names)
-
-diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
-index 33d4937..921da60 100644
---- a/arch/avr32/kernel/entry-avr32b.S
-+++ b/arch/avr32/kernel/entry-avr32b.S
-@@ -112,7 +112,9 @@ pgtbl_lookup:
-
- /* Second level lookup */
- ld.w r2, r3[r1 << 2]
-+#ifdef CONFIG_CPU_AT32AP700X
- mfsr r0, SYSREG_TLBARLO
-+#endif
- bld r2, _PAGE_BIT_PRESENT
- brcc page_not_present
-
-@@ -124,6 +126,8 @@ pgtbl_lookup:
- andl r2, _PAGE_FLAGS_HARDWARE_MASK & 0xffff
- mtsr SYSREG_TLBELO, r2
-
-+ /* Later CPUs do this algorithm in hardware */
-+#ifdef CONFIG_CPU_AT32AP700X
- /* Figure out which entry we want to replace */
- mfsr r1, SYSREG_MMUCR
- clz r2, r0
-@@ -134,6 +138,7 @@ pgtbl_lookup:
-
- 1: bfins r1, r2, SYSREG_DRP_OFFSET, SYSREG_DRP_SIZE
- mtsr SYSREG_MMUCR, r1
-+#endif /* CONFIG_CPU_AT32AP700X */
- tlbw
-
- tlbmiss_restore
-@@ -751,8 +756,10 @@ irq_level\level:
-
- lddsp r4, sp[REG_SR]
- bfextu r4, r4, SYSREG_M0_OFFSET, 3
-+#ifdef CONFIG_CPU_AT32AP700X
- cp.w r4, MODE_SUPERVISOR >> SYSREG_M0_OFFSET
- breq 2f
-+#endif
- cp.w r4, MODE_USER >> SYSREG_M0_OFFSET
- #ifdef CONFIG_PREEMPT
- brne 3f
-@@ -786,6 +793,7 @@ irq_level\level:
- rete
- #endif
-
-+#ifdef CONFIG_CPU_AT32AP700X
- 2: get_thread_info r0
- ld.w r1, r0[TI_flags]
- bld r1, TIF_CPU_GOING_TO_SLEEP
-@@ -796,6 +804,7 @@ irq_level\level:
- #endif
- sub r1, pc, . - cpu_idle_skip_sleep
- stdsp sp[REG_PC], r1
-+#endif
- #ifdef CONFIG_PREEMPT
- 3: get_thread_info r0
- ld.w r2, r0[TI_preempt_count]
-diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
-index 2c08ac9..134d530 100644
---- a/arch/avr32/kernel/process.c
-+++ b/arch/avr32/kernel/process.c
-@@ -9,6 +9,7 @@
- #include <linux/module.h>
- #include <linux/kallsyms.h>
- #include <linux/fs.h>
-+#include <linux/pm.h>
- #include <linux/ptrace.h>
- #include <linux/reboot.h>
- #include <linux/tick.h>
-@@ -20,7 +21,7 @@
-
- #include <mach/pm.h>
-
--void (*pm_power_off)(void) = NULL;
-+void (*pm_power_off)(void);
- EXPORT_SYMBOL(pm_power_off);
-
- /*
-diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
-index d8e623c..5c70839 100644
---- a/arch/avr32/kernel/setup.c
-+++ b/arch/avr32/kernel/setup.c
-@@ -283,6 +283,25 @@ static int __init early_parse_fbmem(char *p)
- }
- early_param("fbmem", early_parse_fbmem);
-
-+/*
-+ * Pick out the memory size. We look for mem=size@start,
-+ * where start and size are "size[KkMmGg]"
-+ */
-+static int __init early_mem(char *p)
-+{
-+ resource_size_t size, start;
-+
-+ start = system_ram->start;
-+ size = memparse(p, &p);
-+ if (*p == '@')
-+ start = memparse(p + 1, &p);
-+
-+ system_ram->start = start;
-+ system_ram->end = system_ram->start + size - 1;
-+ return 0;
-+}
-+early_param("mem", early_mem);
-+
- static int __init parse_tag_core(struct tag *tag)
- {
- if (tag->hdr.size > 2) {
-diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
-index 283481d..09dfab9 100644
---- a/arch/avr32/kernel/time.c
-+++ b/arch/avr32/kernel/time.c
-@@ -15,6 +15,8 @@
-
- #include <asm/sysreg.h>
-
-+#include <mach/cpu.h>
-+#include <mach/init.h>
- #include <mach/pm.h>
-
-
-@@ -116,6 +118,9 @@ void __init time_init(void)
- unsigned long counter_hz;
- int ret;
-
-+ /* Make sure we don't get any interrupts until we ask for it. */
-+ sysreg_write(COMPARE, 0);
-+
- xtime.tv_sec = mktime(2007, 1, 1, 0, 0, 0);
- xtime.tv_nsec = 0;
-
-@@ -130,12 +135,16 @@ void __init time_init(void)
- if (ret)
- pr_debug("timer: could not register clocksource: %d\n", ret);
-
-+ if (!cpu_has_working_compare()) {
-+ platform_time_init();
-+ return;
-+ }
-+
- /* setup COMPARE clockevent */
- comparator.mult = div_sc(counter_hz, NSEC_PER_SEC, comparator.shift);
- comparator.max_delta_ns = clockevent_delta2ns((u32)~0, &comparator);
- comparator.min_delta_ns = clockevent_delta2ns(50, &comparator) + 1;
-
-- sysreg_write(COMPARE, 0);
- timer_irqaction.dev_id = &comparator;
-
- ret = setup_irq(0, &timer_irqaction);
-diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
-index 514c9a9..79ef59b 100644
---- a/arch/avr32/mach-at32ap/Makefile
-+++ b/arch/avr32/mach-at32ap/Makefile
-@@ -1,9 +1,14 @@
--obj-y += pdc.o clock.o intc.o extint.o pio.o hsmc.o
-+obj-y += pdc.o clock.o intc.o extint.o hsmc.o
- obj-y += hmatrix.o
--obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o
-+obj-$(CONFIG_PORTMUX_PIO) += pio.o
-+obj-$(CONFIG_PORTMUX_GPIO_V2) += gpio-v2.o
-+obj-$(CONFIG_TIMER_AST) += timer-ast.o
- obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
- obj-$(CONFIG_PM) += pm.o
-
-+obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o
-+obj-$(CONFIG_CPU_AT32AP720X) += at32ap720x.o pm-at32ap720x.o
-+
- ifeq ($(CONFIG_PM_DEBUG),y)
- CFLAGS_pm.o += -DDEBUG
- endif
-diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
-index e01dbe4..7e83326 100644
---- a/arch/avr32/mach-at32ap/at32ap700x.c
-+++ b/arch/avr32/mach-at32ap/at32ap700x.c
-@@ -23,6 +23,7 @@
- #include <mach/at32ap700x.h>
- #include <mach/board.h>
- #include <mach/hmatrix.h>
-+#include <mach/pm.h>
- #include <mach/portmux.h>
- #include <mach/sram.h>
-
-@@ -30,7 +31,7 @@
-
- #include "clock.h"
- #include "pio.h"
--#include "pm.h"
-+#include "pm-v1.h"
-
-
- #define PBMEM(base) \
-@@ -82,8 +83,9 @@ static struct platform_device _name##_id##_device = { \
- .num_resources = ARRAY_SIZE(_name##_id##_resource), \
- }
-
--#define select_peripheral(pin, periph, flags) \
-- at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
-+#define select_peripheral(port, pin_mask, periph, flags) \
-+ at32_select_periph(GPIO_##port##_BASE, pin_mask, \
-+ GPIO_##periph, flags)
-
- #define DEV_CLK(_name, devname, bus, _index) \
- static struct clk devname##_##_name = { \
-@@ -812,7 +814,7 @@ static struct resource pio4_resource[] = {
- DEFINE_DEV(pio, 4);
- DEV_CLK(mck, pio4, pba, 14);
-
--void __init at32_add_system_devices(void)
-+static int __init system_device_init(void)
- {
- platform_device_register(&at32_pm0_device);
- platform_device_register(&at32_intc0_device);
-@@ -831,7 +833,10 @@ void __init at32_add_system_devices(void)
- platform_device_register(&pio2_device);
- platform_device_register(&pio3_device);
- platform_device_register(&pio4_device);
-+
-+ return 0;
- }
-+core_initcall(system_device_init);
-
- /* --------------------------------------------------------------------
- * PSIF
-@@ -871,6 +876,7 @@ static struct clk atmel_psif1_pclk = {
- struct platform_device *__init at32_add_device_psif(unsigned int id)
- {
- struct platform_device *pdev;
-+ u32 pin_mask;
-
- if (!(id == 0 || id == 1))
- return NULL;
-@@ -881,20 +887,22 @@ struct platform_device *__init at32_add_device_psif(unsigned int id)
-
- switch (id) {
- case 0:
-+ pin_mask = (1 << 8) | (1 << 9); /* CLOCK & DATA */
-+
- if (platform_device_add_resources(pdev, atmel_psif0_resource,
- ARRAY_SIZE(atmel_psif0_resource)))
- goto err_add_resources;
- atmel_psif0_pclk.dev = &pdev->dev;
-- select_peripheral(PA(8), PERIPH_A, 0); /* CLOCK */
-- select_peripheral(PA(9), PERIPH_A, 0); /* DATA */
-+ select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
- break;
- case 1:
-+ pin_mask = (1 << 11) | (1 << 12); /* CLOCK & DATA */
-+
- if (platform_device_add_resources(pdev, atmel_psif1_resource,
- ARRAY_SIZE(atmel_psif1_resource)))
- goto err_add_resources;
- atmel_psif1_pclk.dev = &pdev->dev;
-- select_peripheral(PB(11), PERIPH_A, 0); /* CLOCK */
-- select_peripheral(PB(12), PERIPH_A, 0); /* DATA */
-+ select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
- break;
- default:
- return NULL;
-@@ -958,26 +966,30 @@ DEV_CLK(usart, atmel_usart3, pba, 6);
-
- static inline void configure_usart0_pins(void)
- {
-- select_peripheral(PA(8), PERIPH_B, 0); /* RXD */
-- select_peripheral(PA(9), PERIPH_B, 0); /* TXD */
-+ u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
-+
-+ select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
- }
-
- static inline void configure_usart1_pins(void)
- {
-- select_peripheral(PA(17), PERIPH_A, 0); /* RXD */
-- select_peripheral(PA(18), PERIPH_A, 0); /* TXD */
-+ u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
-+
-+ select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP);
- }
-
- static inline void configure_usart2_pins(void)
- {
-- select_peripheral(PB(26), PERIPH_B, 0); /* RXD */
-- select_peripheral(PB(27), PERIPH_B, 0); /* TXD */
-+ u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
-+
-+ select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
- }
-
- static inline void configure_usart3_pins(void)
- {
-- select_peripheral(PB(18), PERIPH_B, 0); /* RXD */
-- select_peripheral(PB(17), PERIPH_B, 0); /* TXD */
-+ u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
-+
-+ select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
- }
-
- static struct platform_device *__initdata at32_usarts[4];
-@@ -1057,59 +1069,73 @@ struct platform_device *__init
- at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
- {
- struct platform_device *pdev;
-+ u32 pin_mask;
-
- switch (id) {
- case 0:
- pdev = &macb0_device;
-
-- select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */
-- select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */
-- select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */
-- select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */
-- select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */
-- select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */
-- select_peripheral(PC(13), PERIPH_A, 0); /* RXER */
-- select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */
-- select_peripheral(PC(16), PERIPH_A, 0); /* MDC */
-- select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */
-+ pin_mask = (1 << 3); /* TXD0 */
-+ pin_mask |= (1 << 4); /* TXD1 */
-+ pin_mask |= (1 << 7); /* TXEN */
-+ pin_mask |= (1 << 8); /* TXCK */
-+ pin_mask |= (1 << 9); /* RXD0 */
-+ pin_mask |= (1 << 10); /* RXD1 */
-+ pin_mask |= (1 << 13); /* RXER */
-+ pin_mask |= (1 << 15); /* RXDV */
-+ pin_mask |= (1 << 16); /* MDC */
-+ pin_mask |= (1 << 17); /* MDIO */
-
- if (!data->is_rmii) {
-- select_peripheral(PC(0), PERIPH_A, 0); /* COL */
-- select_peripheral(PC(1), PERIPH_A, 0); /* CRS */
-- select_peripheral(PC(2), PERIPH_A, 0); /* TXER */
-- select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */
-- select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */
-- select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */
-- select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */
-- select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */
-- select_peripheral(PC(18), PERIPH_A, 0); /* SPD */
-+ pin_mask |= (1 << 0); /* COL */
-+ pin_mask |= (1 << 1); /* CRS */
-+ pin_mask |= (1 << 2); /* TXER */
-+ pin_mask |= (1 << 5); /* TXD2 */
-+ pin_mask |= (1 << 6); /* TXD3 */
-+ pin_mask |= (1 << 11); /* RXD2 */
-+ pin_mask |= (1 << 12); /* RXD3 */
-+ pin_mask |= (1 << 14); /* RXCK */
-+#ifndef CONFIG_BOARD_MIMC200
-+ pin_mask |= (1 << 18); /* SPD */
-+#endif
- }
-+
-+ select_peripheral(PIOC, pin_mask, PERIPH_A, 0);
-+
- break;
-
- case 1:
- pdev = &macb1_device;
-
-- select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */
-- select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */
-- select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */
-- select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */
-- select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */
-- select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */
-- select_peripheral(PD(5), PERIPH_B, 0); /* RXER */
-- select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */
-- select_peripheral(PD(3), PERIPH_B, 0); /* MDC */
-- select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */
-+ pin_mask = (1 << 13); /* TXD0 */
-+ pin_mask |= (1 << 14); /* TXD1 */
-+ pin_mask |= (1 << 11); /* TXEN */
-+ pin_mask |= (1 << 12); /* TXCK */
-+ pin_mask |= (1 << 10); /* RXD0 */
-+ pin_mask |= (1 << 6); /* RXD1 */
-+ pin_mask |= (1 << 5); /* RXER */
-+ pin_mask |= (1 << 4); /* RXDV */
-+ pin_mask |= (1 << 3); /* MDC */
-+ pin_mask |= (1 << 2); /* MDIO */
-+
-+#ifndef CONFIG_BOARD_MIMC200
-+ if (!data->is_rmii)
-+ pin_mask |= (1 << 15); /* SPD */
-+#endif
-+
-+ select_peripheral(PIOD, pin_mask, PERIPH_B, 0);
-
- if (!data->is_rmii) {
-- select_peripheral(PC(19), PERIPH_B, 0); /* COL */
-- select_peripheral(PC(23), PERIPH_B, 0); /* CRS */
-- select_peripheral(PC(26), PERIPH_B, 0); /* TXER */
-- select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */
-- select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */
-- select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */
-- select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */
-- select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */
-- select_peripheral(PD(15), PERIPH_B, 0); /* SPD */
-+ pin_mask = (1 << 19); /* COL */
-+ pin_mask |= (1 << 23); /* CRS */
-+ pin_mask |= (1 << 26); /* TXER */
-+ pin_mask |= (1 << 27); /* TXD2 */
-+ pin_mask |= (1 << 28); /* TXD3 */
-+ pin_mask |= (1 << 29); /* RXD2 */
-+ pin_mask |= (1 << 30); /* RXD3 */
-+ pin_mask |= (1 << 24); /* RXCK */
-+
-+ select_peripheral(PIOC, pin_mask, PERIPH_B, 0);
- }
- break;
-
-@@ -1130,6 +1156,7 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
- static struct resource atmel_spi0_resource[] = {
- PBMEM(0xffe00000),
- IRQ(3),
-+ { 0 }, /* SRAM buffer, if available */
- };
- DEFINE_DEV(atmel_spi, 0);
- DEV_CLK(spi_clk, atmel_spi0, pba, 0);
-@@ -1137,6 +1164,7 @@ DEV_CLK(spi_clk, atmel_spi0, pba, 0);
- static struct resource atmel_spi1_resource[] = {
- PBMEM(0xffe00400),
- IRQ(4),
-+ { 0 }, /* SRAM buffer, if available */
- };
- DEFINE_DEV(atmel_spi, 1);
- DEV_CLK(spi_clk, atmel_spi1, pba, 1);
-@@ -1166,6 +1194,8 @@ at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
- struct platform_device *__init
- at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
- {
-+ unsigned long sram_buf;
-+
- /*
- * Manage the chipselects as GPIOs, normally using the same pins
- * the SPI controller expects; but boards can use other pins.
-@@ -1177,23 +1207,28 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
- { GPIO_PIN_PB(2), GPIO_PIN_PB(3),
- GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
- struct platform_device *pdev;
-+ u32 pin_mask;
-
- switch (id) {
- case 0:
- pdev = &atmel_spi0_device;
-+ pin_mask = (1 << 1) | (1 << 2); /* MOSI & SCK */
-+
- /* pullup MISO so a level is always defined */
-- select_peripheral(PA(0), PERIPH_A, AT32_GPIOF_PULLUP);
-- select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
-- select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
-+ select_peripheral(PIOA, (1 << 0), PERIPH_A, AT32_GPIOF_PULLUP);
-+ select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
-+
- at32_spi_setup_slaves(0, b, n, spi0_pins);
- break;
-
- case 1:
- pdev = &atmel_spi1_device;
-+ pin_mask = (1 << 1) | (1 << 5); /* MOSI */
-+
- /* pullup MISO so a level is always defined */
-- select_peripheral(PB(0), PERIPH_B, AT32_GPIOF_PULLUP);
-- select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
-- select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
-+ select_peripheral(PIOB, (1 << 0), PERIPH_B, AT32_GPIOF_PULLUP);
-+ select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
-+
- at32_spi_setup_slaves(1, b, n, spi1_pins);
- break;
-
-@@ -1201,6 +1236,13 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
- return NULL;
- }
-
-+ sram_buf = sram_alloc(4096);
-+ if (sram_buf) {
-+ pdev->resource[2].start = sram_buf;
-+ pdev->resource[2].end = sram_buf + 4096 - 1;
-+ pdev->resource[2].flags = IORESOURCE_MEM;
-+ }
-+
- spi_register_board_info(b, n);
- platform_device_register(pdev);
- return pdev;
-@@ -1226,6 +1268,7 @@ struct platform_device *__init at32_add_device_twi(unsigned int id,
- unsigned int n)
- {
- struct platform_device *pdev;
-+ u32 pin_mask;
-
- if (id != 0)
- return NULL;
-@@ -1238,8 +1281,9 @@ struct platform_device *__init at32_add_device_twi(unsigned int id,
- ARRAY_SIZE(atmel_twi0_resource)))
- goto err_add_resources;
-
-- select_peripheral(PA(6), PERIPH_A, 0); /* SDA */
-- select_peripheral(PA(7), PERIPH_A, 0); /* SDL */
-+ pin_mask = (1 << 6) | (1 << 7); /* SDA & SDL */
-+
-+ select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
-
- atmel_twi0_pclk.dev = &pdev->dev;
-
-@@ -1272,10 +1316,16 @@ static struct clk atmel_mci0_pclk = {
- struct platform_device *__init
- at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
- {
-- struct mci_platform_data _data;
- struct platform_device *pdev;
-+ struct dw_dma_slave *dws;
-+ u32 pioa_mask;
-+ u32 piob_mask;
-
-- if (id != 0)
-+ if (id != 0 || !data)
-+ return NULL;
-+
-+ /* Must have at least one usable slot */
-+ if (!data->slot[0].bus_width && !data->slot[1].bus_width)
- return NULL;
-
- pdev = platform_device_alloc("atmel_mci", id);
-@@ -1286,28 +1336,80 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
- ARRAY_SIZE(atmel_mci0_resource)))
- goto fail;
-
-- if (!data) {
-- data = &_data;
-- memset(data, -1, sizeof(struct mci_platform_data));
-- data->detect_pin = GPIO_PIN_NONE;
-- data->wp_pin = GPIO_PIN_NONE;
-- }
-+ if (data->dma_slave)
-+ dws = kmemdup(to_dw_dma_slave(data->dma_slave),
-+ sizeof(struct dw_dma_slave), GFP_KERNEL);
-+ else
-+ dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL);
-+
-+ dws->slave.dev = &pdev->dev;
-+ dws->slave.dma_dev = &dw_dmac0_device.dev;
-+ dws->slave.reg_width = DMA_SLAVE_WIDTH_32BIT;
-+ dws->cfg_hi = (DWC_CFGH_SRC_PER(0)
-+ | DWC_CFGH_DST_PER(1));
-+ dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL
-+ | DWC_CFGL_HS_SRC_POL);
-+
-+ data->dma_slave = &dws->slave;
-
- if (platform_device_add_data(pdev, data,
- sizeof(struct mci_platform_data)))
- goto fail;
-
-- select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
-- select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
-- select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
-- select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
-- select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
-- select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
-+ /* CLK line is common to both slots */
-+ pioa_mask = 1 << 10;
-
-- if (gpio_is_valid(data->detect_pin))
-- at32_select_gpio(data->detect_pin, 0);
-- if (gpio_is_valid(data->wp_pin))
-- at32_select_gpio(data->wp_pin, 0);
-+ switch (data->slot[0].bus_width) {
-+ case 4:
-+ pioa_mask |= 1 << 13; /* DATA1 */
-+ pioa_mask |= 1 << 14; /* DATA2 */
-+ pioa_mask |= 1 << 15; /* DATA3 */
-+ /* fall through */
-+ case 1:
-+ pioa_mask |= 1 << 11; /* CMD */
-+ pioa_mask |= 1 << 12; /* DATA0 */
-+
-+ if (gpio_is_valid(data->slot[0].detect_pin))
-+ at32_select_gpio(data->slot[0].detect_pin, 0);
-+ if (gpio_is_valid(data->slot[0].wp_pin))
-+ at32_select_gpio(data->slot[0].wp_pin, 0);
-+ break;
-+ case 0:
-+ /* Slot is unused */
-+ break;
-+ default:
-+ goto fail;
-+ }
-+
-+ select_peripheral(PIOA, pioa_mask, PERIPH_A, 0);
-+ piob_mask = 0;
-+
-+ switch (data->slot[1].bus_width) {
-+ case 4:
-+ piob_mask |= 1 << 8; /* DATA1 */
-+ piob_mask |= 1 << 9; /* DATA2 */
-+ piob_mask |= 1 << 10; /* DATA3 */
-+ /* fall through */
-+ case 1:
-+ piob_mask |= 1 << 6; /* CMD */
-+ piob_mask |= 1 << 7; /* DATA0 */
-+ select_peripheral(PIOB, piob_mask, PERIPH_B, 0);
-+
-+ if (gpio_is_valid(data->slot[1].detect_pin))
-+ at32_select_gpio(data->slot[1].detect_pin, 0);
-+ if (gpio_is_valid(data->slot[1].wp_pin))
-+ at32_select_gpio(data->slot[1].wp_pin, 0);
-+ break;
-+ case 0:
-+ /* Slot is unused */
-+ break;
-+ default:
-+ if (!data->slot[0].bus_width)
-+ goto fail;
-+
-+ data->slot[1].bus_width = 0;
-+ break;
-+ }
-
- atmel_mci0_pclk.dev = &pdev->dev;
-
-@@ -1353,13 +1455,14 @@ static struct clk atmel_lcdfb0_pixclk = {
- struct platform_device *__init
- at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
- unsigned long fbmem_start, unsigned long fbmem_len,
-- unsigned int pin_config)
-+ u64 pin_mask)
- {
- struct platform_device *pdev;
- struct atmel_lcdfb_info *info;
- struct fb_monspecs *monspecs;
- struct fb_videomode *modedb;
- unsigned int modedb_size;
-+ u32 portc_mask, portd_mask, porte_mask;
-
- /*
- * Do a deep copy of the fb data, monspecs and modedb. Make
-@@ -1381,76 +1484,21 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
- case 0:
- pdev = &atmel_lcdfb0_device;
-
-- switch (pin_config) {
-- case 0:
-- select_peripheral(PC(19), PERIPH_A, 0); /* CC */
-- select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
-- select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
-- select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
-- select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
-- select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
-- select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
-- select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
-- select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
-- select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
-- select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
-- select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
-- select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
-- select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
-- select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
-- select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
-- select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
-- select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
-- select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
-- select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
-- select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
-- select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
-- select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
-- select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
-- select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
-- select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
-- select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
-- select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
-- select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
-- select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
-- select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
-- break;
-- case 1:
-- select_peripheral(PE(0), PERIPH_B, 0); /* CC */
-- select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
-- select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
-- select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
-- select_peripheral(PE(1), PERIPH_B, 0); /* DVAL */
-- select_peripheral(PE(2), PERIPH_B, 0); /* MODE */
-- select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
-- select_peripheral(PE(3), PERIPH_B, 0); /* DATA0 */
-- select_peripheral(PE(4), PERIPH_B, 0); /* DATA1 */
-- select_peripheral(PE(5), PERIPH_B, 0); /* DATA2 */
-- select_peripheral(PE(6), PERIPH_B, 0); /* DATA3 */
-- select_peripheral(PE(7), PERIPH_B, 0); /* DATA4 */
-- select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
-- select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
-- select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
-- select_peripheral(PE(8), PERIPH_B, 0); /* DATA8 */
-- select_peripheral(PE(9), PERIPH_B, 0); /* DATA9 */
-- select_peripheral(PE(10), PERIPH_B, 0); /* DATA10 */
-- select_peripheral(PE(11), PERIPH_B, 0); /* DATA11 */
-- select_peripheral(PE(12), PERIPH_B, 0); /* DATA12 */
-- select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
-- select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
-- select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
-- select_peripheral(PE(13), PERIPH_B, 0); /* DATA16 */
-- select_peripheral(PE(14), PERIPH_B, 0); /* DATA17 */
-- select_peripheral(PE(15), PERIPH_B, 0); /* DATA18 */
-- select_peripheral(PE(16), PERIPH_B, 0); /* DATA19 */
-- select_peripheral(PE(17), PERIPH_B, 0); /* DATA20 */
-- select_peripheral(PE(18), PERIPH_B, 0); /* DATA21 */
-- select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
-- select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
-- break;
-- default:
-- goto err_invalid_id;
-- }
-+ if (pin_mask == 0ULL)
-+ /* Default to "full" lcdc control signals and 24bit */
-+ pin_mask = ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL;
-+
-+ /* LCDC on port C */
-+ portc_mask = pin_mask & 0xfff80000;
-+ select_peripheral(PIOC, portc_mask, PERIPH_A, 0);
-+
-+ /* LCDC on port D */
-+ portd_mask = pin_mask & 0x0003ffff;
-+ select_peripheral(PIOD, portd_mask, PERIPH_A, 0);
-+
-+ /* LCDC on port E */
-+ porte_mask = (pin_mask >> 32) & 0x0007ffff;
-+ select_peripheral(PIOE, porte_mask, PERIPH_B, 0);
-
- clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
- clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
-@@ -1499,6 +1547,7 @@ static struct clk atmel_pwm0_mck = {
- struct platform_device *__init at32_add_device_pwm(u32 mask)
- {
- struct platform_device *pdev;
-+ u32 pin_mask;
-
- if (!mask)
- return NULL;
-@@ -1514,14 +1563,21 @@ struct platform_device *__init at32_add_device_pwm(u32 mask)
- if (platform_device_add_data(pdev, &mask, sizeof(mask)))
- goto out_free_pdev;
-
-+ pin_mask = 0;
- if (mask & (1 << 0))
-- select_peripheral(PA(28), PERIPH_A, 0);
-+ pin_mask |= (1 << 28);
- if (mask & (1 << 1))
-- select_peripheral(PA(29), PERIPH_A, 0);
-+ pin_mask |= (1 << 29);
-+ if (pin_mask > 0)
-+ select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
-+
-+ pin_mask = 0;
- if (mask & (1 << 2))
-- select_peripheral(PA(21), PERIPH_B, 0);
-+ pin_mask |= (1 << 21);
- if (mask & (1 << 3))
-- select_peripheral(PA(22), PERIPH_B, 0);
-+ pin_mask |= (1 << 22);
-+ if (pin_mask > 0)
-+ select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
-
- atmel_pwm0_mck.dev = &pdev->dev;
-
-@@ -1562,52 +1618,65 @@ struct platform_device *__init
- at32_add_device_ssc(unsigned int id, unsigned int flags)
- {
- struct platform_device *pdev;
-+ u32 pin_mask = 0;
-
- switch (id) {
- case 0:
- pdev = &ssc0_device;
- if (flags & ATMEL_SSC_RF)
-- select_peripheral(PA(21), PERIPH_A, 0); /* RF */
-+ pin_mask |= (1 << 21); /* RF */
- if (flags & ATMEL_SSC_RK)
-- select_peripheral(PA(22), PERIPH_A, 0); /* RK */
-+ pin_mask |= (1 << 22); /* RK */
- if (flags & ATMEL_SSC_TK)
-- select_peripheral(PA(23), PERIPH_A, 0); /* TK */
-+ pin_mask |= (1 << 23); /* TK */
- if (flags & ATMEL_SSC_TF)
-- select_peripheral(PA(24), PERIPH_A, 0); /* TF */
-+ pin_mask |= (1 << 24); /* TF */
- if (flags & ATMEL_SSC_TD)
-- select_peripheral(PA(25), PERIPH_A, 0); /* TD */
-+ pin_mask |= (1 << 25); /* TD */
- if (flags & ATMEL_SSC_RD)
-- select_peripheral(PA(26), PERIPH_A, 0); /* RD */
-+ pin_mask |= (1 << 26); /* RD */
-+
-+ if (pin_mask > 0)
-+ select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
-+
- break;
- case 1:
- pdev = &ssc1_device;
- if (flags & ATMEL_SSC_RF)
-- select_peripheral(PA(0), PERIPH_B, 0); /* RF */
-+ pin_mask |= (1 << 0); /* RF */
- if (flags & ATMEL_SSC_RK)
-- select_peripheral(PA(1), PERIPH_B, 0); /* RK */
-+ pin_mask |= (1 << 1); /* RK */
- if (flags & ATMEL_SSC_TK)
-- select_peripheral(PA(2), PERIPH_B, 0); /* TK */
-+ pin_mask |= (1 << 2); /* TK */
- if (flags & ATMEL_SSC_TF)
-- select_peripheral(PA(3), PERIPH_B, 0); /* TF */
-+ pin_mask |= (1 << 3); /* TF */
- if (flags & ATMEL_SSC_TD)
-- select_peripheral(PA(4), PERIPH_B, 0); /* TD */
-+ pin_mask |= (1 << 4); /* TD */
- if (flags & ATMEL_SSC_RD)
-- select_peripheral(PA(5), PERIPH_B, 0); /* RD */
-+ pin_mask |= (1 << 5); /* RD */
-+
-+ if (pin_mask > 0)
-+ select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
-+
- break;
- case 2:
- pdev = &ssc2_device;
- if (flags & ATMEL_SSC_TD)
-- select_peripheral(PB(13), PERIPH_A, 0); /* TD */
-+ pin_mask |= (1 << 13); /* TD */
- if (flags & ATMEL_SSC_RD)
-- select_peripheral(PB(14), PERIPH_A, 0); /* RD */
-+ pin_mask |= (1 << 14); /* RD */
- if (flags & ATMEL_SSC_TK)
-- select_peripheral(PB(15), PERIPH_A, 0); /* TK */
-+ pin_mask |= (1 << 15); /* TK */
- if (flags & ATMEL_SSC_TF)
-- select_peripheral(PB(16), PERIPH_A, 0); /* TF */
-+ pin_mask |= (1 << 16); /* TF */
- if (flags & ATMEL_SSC_RF)
-- select_peripheral(PB(17), PERIPH_A, 0); /* RF */
-+ pin_mask |= (1 << 17); /* RF */
- if (flags & ATMEL_SSC_RK)
-- select_peripheral(PB(18), PERIPH_A, 0); /* RK */
-+ pin_mask |= (1 << 18); /* RK */
-+
-+ if (pin_mask > 0)
-+ select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
-+
- break;
- default:
- return NULL;
-@@ -1745,14 +1814,15 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
- unsigned int cs, unsigned int extint)
- {
- static unsigned int extint_pin_map[4] __initdata = {
-- GPIO_PIN_PB(25),
-- GPIO_PIN_PB(26),
-- GPIO_PIN_PB(27),
-- GPIO_PIN_PB(28),
-+ (1 << 25),
-+ (1 << 26),
-+ (1 << 27),
-+ (1 << 28),
- };
- static bool common_pins_initialized __initdata = false;
- unsigned int extint_pin;
- int ret;
-+ u32 pin_mask;
-
- if (extint >= ARRAY_SIZE(extint_pin_map))
- return -EINVAL;
-@@ -1766,7 +1836,8 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
- if (ret)
- return ret;
-
-- select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 -> OE_N */
-+ /* NCS4 -> OE_N */
-+ select_peripheral(PIOE, (1 << 21), PERIPH_A, 0);
- hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF0_ENABLE);
- break;
- case 5:
-@@ -1776,7 +1847,8 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
- if (ret)
- return ret;
-
-- select_peripheral(PE(22), PERIPH_A, 0); /* NCS5 -> OE_N */
-+ /* NCS5 -> OE_N */
-+ select_peripheral(PIOE, (1 << 22), PERIPH_A, 0);
- hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF1_ENABLE);
- break;
- default:
-@@ -1784,14 +1856,17 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
- }
-
- if (!common_pins_initialized) {
-- select_peripheral(PE(19), PERIPH_A, 0); /* CFCE1 -> CS0_N */
-- select_peripheral(PE(20), PERIPH_A, 0); /* CFCE2 -> CS1_N */
-- select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW -> DIR */
-- select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT <- IORDY */
-+ pin_mask = (1 << 19); /* CFCE1 -> CS0_N */
-+ pin_mask |= (1 << 20); /* CFCE2 -> CS1_N */
-+ pin_mask |= (1 << 23); /* CFRNW -> DIR */
-+ pin_mask |= (1 << 24); /* NWAIT <- IORDY */
-+
-+ select_peripheral(PIOE, pin_mask, PERIPH_A, 0);
-+
- common_pins_initialized = true;
- }
-
-- at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
-+ select_peripheral(PIOB, extint_pin, PERIPH_A, AT32_GPIOF_DEGLITCH);
-
- pdev->resource[1].start = EIM_IRQ_BASE + extint;
- pdev->resource[1].end = pdev->resource[1].start;
-@@ -1930,6 +2005,7 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
- {
- struct platform_device *pdev;
- struct ac97c_platform_data _data;
-+ u32 pin_mask;
-
- if (id != 0)
- return NULL;
-@@ -1956,10 +2032,10 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
- sizeof(struct ac97c_platform_data)))
- goto fail;
-
-- select_peripheral(PB(20), PERIPH_B, 0); /* SDO */
-- select_peripheral(PB(21), PERIPH_B, 0); /* SYNC */
-- select_peripheral(PB(22), PERIPH_B, 0); /* SCLK */
-- select_peripheral(PB(23), PERIPH_B, 0); /* SDI */
-+ pin_mask = (1 << 20) | (1 << 21); /* SDO & SYNC */
-+ pin_mask |= (1 << 22) | (1 << 23); /* SCLK & SDI */
-+
-+ select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
-
- /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
- if (data->reset_pin != GPIO_PIN_NONE)
-@@ -2001,6 +2077,7 @@ static struct clk abdac0_sample_clk = {
- struct platform_device *__init at32_add_device_abdac(unsigned int id)
- {
- struct platform_device *pdev;
-+ u32 pin_mask;
-
- if (id != 0)
- return NULL;
-@@ -2013,10 +2090,10 @@ struct platform_device *__init at32_add_device_abdac(unsigned int id)
- ARRAY_SIZE(abdac0_resource)))
- goto err_add_resources;
-
-- select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */
-- select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */
-- select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */
-- select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */
-+ pin_mask = (1 << 20) | (1 << 22); /* DATA1 & DATAN1 */
-+ pin_mask |= (1 << 21) | (1 << 23); /* DATA0 & DATAN0 */
-+
-+ select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
-
- abdac0_pclk.dev = &pdev->dev;
- abdac0_sample_clk.dev = &pdev->dev;
-@@ -2073,7 +2150,7 @@ static struct clk gclk4 = {
- .index = 4,
- };
-
--struct clk *at32_clock_list[] = {
-+static __initdata struct clk *init_clocks[] = {
- &osc32k,
- &osc0,
- &osc1,
-@@ -2137,7 +2214,6 @@ struct clk *at32_clock_list[] = {
- &gclk3,
- &gclk4,
- };
--unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
-
- void __init setup_platform(void)
- {
-@@ -2168,14 +2244,19 @@ void __init setup_platform(void)
- genclk_init_parent(&abdac0_sample_clk);
-
- /*
-- * Turn on all clocks that have at least one user already, and
-- * turn off everything else. We only do this for module
-- * clocks, and even though it isn't particularly pretty to
-- * check the address of the mode function, it should do the
-- * trick...
-+ * Build initial dynamic clock list by registering all clocks
-+ * from the array.
-+ * At the same time, turn on all clocks that have at least one
-+ * user already, and turn off everything else. We only do this
-+ * for module clocks, and even though it isn't particularly
-+ * pretty to check the address of the mode function, it should
-+ * do the trick...
- */
-- for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
-- struct clk *clk = at32_clock_list[i];
-+ for (i = 0; i < ARRAY_SIZE(init_clocks); i++) {
-+ struct clk *clk = init_clocks[i];
-+
-+ /* first, register clock */
-+ at32_clk_register(clk);
-
- if (clk->users == 0)
- continue;
-@@ -2203,6 +2284,11 @@ void __init setup_platform(void)
- at32_init_pio(&pio4_device);
- }
-
-+unsigned long at32_get_reset_cause(void)
-+{
-+ return pm_readl(RCAUSE);
-+}
-+
- struct gen_pool *sram_pool;
-
- static int __init sram_init(void)
-diff --git a/arch/avr32/mach-at32ap/at32ap720x.c b/arch/avr32/mach-at32ap/at32ap720x.c
-new file mode 100644
-index 0000000..0cb675a
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/at32ap720x.c
-@@ -0,0 +1,2303 @@
-+/*
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/atmel_pdca.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dw_dmac.h>
-+#include <linux/errno.h>
-+#include <linux/fb.h>
-+#include <linux/gpio.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm.h>
-+#include <linux/spinlock.h>
-+#include <linux/spi/atmel_spi.h>
-+#include <linux/spi/spi.h>
-+#include <video/atmel_lcdc.h>
-+#include <video/atmel_mpop.h>
-+
-+#include <asm/ast_regs.h>
-+#include <asm/atmel-mci.h>
-+
-+#include <mach/at32ap720x.h>
-+#include <mach/board.h>
-+#include <mach/hmatrix.h>
-+#include <mach/init.h>
-+#include <mach/pm.h>
-+#include <mach/portmux.h>
-+#include <mach/sram.h>
-+
-+#include "clock.h"
-+#include "gpio-v2.h"
-+#include "pm-v3.h"
-+#include "sdc.h"
-+
-+#define PBMEM(base) \
-+ { \
-+ .start = base, \
-+ .end = base + 0x3ff, \
-+ .flags = IORESOURCE_MEM, \
-+ }
-+#define IRQ(num) \
-+ { \
-+ .start = num, \
-+ .end = num, \
-+ .flags = IORESOURCE_IRQ, \
-+ }
-+
-+#define select_peripheral(port, pin_mask, periph, flags) \
-+ at32_select_periph(GPIO_##port##_BASE, pin_mask, \
-+ GPIO_##periph, flags)
-+
-+#define DEV_CLK(_name, devname, bus, _index) \
-+static struct clk devname##_##_name = { \
-+ .name = #_name, \
-+ .dev = &devname##_device.dev, \
-+ .parent = &bus##_clk, \
-+ .mode = bus##_clk_mode, \
-+ .get_rate = bus##_clk_get_rate, \
-+ .index = _index, \
-+}
-+
-+static DEFINE_SPINLOCK(pm_lock);
-+
-+static unsigned long rcosc_get_rate(struct clk *clk)
-+{
-+ return 32768;
-+}
-+
-+static unsigned long osc_get_rate(struct clk *clk)
-+{
-+ return at32_board_osc_rates[clk->index];
-+}
-+
-+static void osc32_mode(struct clk *clk, int enabled)
-+{
-+ /* We never disable the 32 kHz oscillator */
-+ if (!enabled)
-+ return;
-+
-+ /* If it's already running, we're done. */
-+ if (pm_readl(POSCSR) & PM_BIT(POSCSR_OSC32RDY))
-+ return;
-+
-+ /* Enable it, unless someone did it for us already */
-+ if (!(sdc_readl(OSCCTRL32) & SDC_BIT(OSCCTRL32_OSC32EN))) {
-+ u32 value;
-+
-+ value = SDC_BF(OSCCTRL32_STARTUP, 5)
-+ | SDC_BF(OSCCTRL32_MODE, 0xd)
-+ | SDC_BIT(OSCCTRL32_OSC32EN);
-+
-+ sdc_writel(OSCCTRL32, value | SDC_BF(OSCCTRL32_KEY, 0x55));
-+ sdc_writel(OSCCTRL32, value | SDC_BF(OSCCTRL32_KEY, 0xaa));
-+ }
-+
-+ pr_info("Waiting for 32 kHz crystal oscillator to start...\n");
-+
-+ while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_OSC32RDY)))
-+ cpu_relax();
-+}
-+
-+static void oscn_mode(struct clk *clk, int enabled)
-+{
-+ unsigned int i = clk->index;
-+ u32 mcctrl;
-+
-+ BUG_ON(i > 2);
-+
-+ /* Let's keep oscillators running for now... */
-+ if (!enabled)
-+ goto out;
-+
-+ /* If it's already running, we're done */
-+ if (pm_readl(POSCSR) & (PM_BIT(POSCSR_OSC0RDY) << i))
-+ goto out;
-+
-+ /* Enable it, unless someone did it for us already */
-+ mcctrl = pm_readl(MCCTRL);
-+ if (!(mcctrl & (PM_BIT(MCCTRL_OSC0EN) << i))) {
-+ /* TODO: Make OSC startup parameters configurable */
-+ pm_writel(OSCCTRL[i], PM_BF(OSCCTRLx_STARTUP, 5)
-+ | PM_BF(OSCCTRLx_MODE, 0xa));
-+ pm_writel(MCCTRL, mcctrl | (PM_BIT(MCCTRL_OSC0EN) << i));
-+ }
-+
-+ pr_debug("clk %s: waiting for clock to become ready...\n", clk->name);
-+ pr_debug("clk %s: MCCTRL=%08x OSCCTRL%u=%08x\n", clk->name,
-+ pm_readl(MCCTRL), i, pm_readl(OSCCTRL[i]));
-+
-+ while (!(pm_readl(POSCSR) & (PM_BIT(POSCSR_OSC0RDY) << i)))
-+ cpu_relax();
-+
-+out:
-+ pr_debug("clk %s: running\n", clk->name);
-+}
-+
-+static struct clk rcosc = {
-+ .name = "rcosc",
-+ .get_rate = rcosc_get_rate,
-+ .users = 1,
-+};
-+static struct clk osc0 = {
-+ .name = "osc0",
-+ .get_rate = osc_get_rate,
-+ .mode = oscn_mode,
-+ .users = 1,
-+ .index = 0,
-+};
-+static struct clk osc1 = {
-+ .name = "osc1",
-+ .get_rate = osc_get_rate,
-+ .mode = oscn_mode,
-+ .index = 1,
-+};
-+static struct clk osc2 = {
-+ .name = "osc2",
-+ .get_rate = osc_get_rate,
-+ .mode = oscn_mode,
-+ .index = 2,
-+};
-+static struct clk osc32 = {
-+ .name = "osc32k",
-+ .get_rate = osc_get_rate,
-+ .mode = osc32_mode,
-+ .index = 3,
-+};
-+
-+static void pll_mode(struct clk *clk, int enabled)
-+{
-+ unsigned long timeout;
-+ unsigned int index = clk->index;
-+ u32 status;
-+ u32 ctrl;
-+
-+ ctrl = pm_readl(PLL[index]);
-+
-+ if (enabled) {
-+ if (PM_BFEXT(PLLx_PLLMUL, ctrl) <= 1) {
-+ pr_debug("clk %s: failed to enable, rate not set\n",
-+ clk->name);
-+ return;
-+ }
-+
-+ ctrl |= PM_BIT(PLLx_PLLEN);
-+ pm_writel(PLL[index], ctrl);
-+
-+ pr_debug("clk %s: waiting for lock...\n", clk->name);
-+ for (timeout = 10000; timeout; timeout--) {
-+ status = pm_readl(POSCSR);
-+ if (status & (PM_BIT(POSCSR_LOCK0) << index))
-+ break;
-+ udelay(10);
-+ }
-+
-+ if (!(status & (PM_BIT(POSCSR_LOCK0) << index)))
-+ pr_err("clk %s: timeout waiting for lock\n",
-+ clk->name);
-+ else
-+ pr_debug("clk %s: running\n", clk->name);
-+ } else {
-+ ctrl &= ~PM_BIT(PLLx_PLLEN);
-+ pm_writel(PLL[index], ctrl);
-+ pr_debug("clk %s: stopped\n", clk->name);
-+ }
-+}
-+
-+
-+static unsigned long pll_get_rate(struct clk *clk)
-+{
-+ unsigned long rate;
-+ unsigned int div;
-+ unsigned int mul;
-+ u32 ctrl;
-+
-+ ctrl = pm_readl(PLL[clk->index]);
-+
-+ div = PM_BFEXT(PLLx_PLLDIV, ctrl);
-+ mul = PM_BFEXT(PLLx_PLLMUL, ctrl);
-+
-+ rate = clk->parent->get_rate(clk->parent);
-+ if (div != 0)
-+ rate = (rate + div / 2) / div;
-+ else
-+ rate = rate * 2;
-+ rate *= mul;
-+
-+ if (ctrl & PM_BF(PLLx_PLLOPT, 4))
-+ rate = (rate + 1) / 2;
-+
-+ return rate;
-+}
-+
-+static long pll_set_rate(struct clk *clk, unsigned long rate, int apply)
-+{
-+ unsigned long mul_best_fit = 0;
-+ unsigned long div;
-+ unsigned long div_min;
-+ unsigned long div_max;
-+ unsigned long div_best_fit = 0;
-+ unsigned long base;
-+ unsigned long fvco;
-+ unsigned long actual = 0;
-+ unsigned long rate_error_prev = ~0UL;
-+ u32 ctrl;
-+
-+ /* Rate must be between 25 MHz and 400 Mhz. */
-+ if (rate < 25000000UL || rate > 400000000UL)
-+ return -EINVAL;
-+
-+ base = clk->parent->get_rate(clk->parent);
-+
-+ /* PLL input frequency must be between 10 MHz and 200 MHz. */
-+ div_min = DIV_ROUND_UP(base, 200000000UL);
-+ div_max = base / 10000000UL;
-+
-+ if (div_max < div_min)
-+ return -EINVAL;
-+
-+ for (div = div_min; div <= div_max; div++) {
-+ unsigned long mul;
-+ unsigned long pll_in;
-+ unsigned long rate_error;
-+
-+ pll_in = (base + div / 2) / div;
-+ mul = (rate + pll_in / 2) / pll_in;
-+
-+ if (mul < 1)
-+ continue;
-+
-+ actual = pll_in * mul;
-+ rate_error = abs(actual - rate);
-+
-+ if (rate_error < rate_error_prev) {
-+ mul_best_fit = mul;
-+ div_best_fit = div;
-+ rate_error_prev = rate_error;
-+ }
-+
-+ if (rate_error == 0)
-+ break;
-+ }
-+
-+ if (div_best_fit == 0)
-+ return -EINVAL;
-+
-+ ctrl = 0;
-+ fvco = actual;
-+
-+ /*
-+ * MUL=1 is not allowed. So we must double it and set the
-+ * divide-by-two bit.
-+ */
-+ if (mul_best_fit == 1) {
-+ ctrl |= PM_BF(PLLx_PLLOPT, 4);
-+ mul_best_fit *= 2;
-+ fvco = actual * 2;
-+ }
-+
-+ if (fvco > 200000000)
-+ ctrl |= PM_BF(PLLx_PLLOPT, 3);
-+ else if (fvco > 100000000)
-+ ctrl |= PM_BF(PLLx_PLLOPT, 2);
-+ else if (fvco > 50000000)
-+ ctrl |= PM_BF(PLLx_PLLOPT, 1);
-+
-+ ctrl |= PM_BF(PLLx_PLLCOUNT, 31);
-+ ctrl |= PM_BF(PLLx_PLLMUL, mul_best_fit);
-+ ctrl |= PM_BF(PLLx_PLLDIV, div_best_fit);
-+ ctrl |= PM_BF(PLLx_PLLOSC, clk->parent->index);
-+
-+ if (apply) {
-+ if (actual != rate)
-+ return -EINVAL;
-+ if (clk->users > 0)
-+ return -EBUSY;
-+ pr_debug(KERN_INFO "clk %s: new rate %lu (actual rate %lu)\n",
-+ clk->name, rate, actual);
-+ pm_writel(PLL[clk->index], ctrl);
-+ }
-+
-+ return actual;
-+}
-+
-+static int pll_set_parent(struct clk *clk, struct clk *parent)
-+{
-+ unsigned int index = clk->index;
-+ u32 ctrl;
-+
-+ if (clk->users > 0)
-+ return -EBUSY;
-+
-+ ctrl = pm_readl(PLL[index]);
-+ BUG_ON(ctrl & PM_BIT(PLLx_PLLEN));
-+
-+ ctrl = PM_BFINS(PLLx_PLLOSC, parent->index, ctrl);
-+ pm_writel(PLL[index], ctrl);
-+
-+ clk->parent = parent;
-+
-+ return 0;
-+}
-+
-+static struct clk pll0 = {
-+ .name = "pll0",
-+ .mode = pll_mode,
-+ .get_rate = pll_get_rate,
-+ .set_rate = pll_set_rate,
-+ .set_parent = pll_set_parent,
-+ .users = 1,
-+ .index = 0,
-+};
-+static struct clk pll1 = {
-+ .name = "pll1",
-+ .mode = pll_mode,
-+ .get_rate = pll_get_rate,
-+ .set_rate = pll_set_rate,
-+ .set_parent = pll_set_parent,
-+ .users = 0,
-+ .index = 1,
-+};
-+static struct clk pll2 = {
-+ .name = "pll2",
-+ .mode = pll_mode,
-+ .get_rate = pll_get_rate,
-+ .set_rate = pll_set_rate,
-+ .set_parent = pll_set_parent,
-+ .users = 0,
-+ .index = 2,
-+};
-+
-+/*
-+ * The main clock can be either rcosc, osc0 or pll0. The boot loader
-+ * may have chosen one for us, so we don't really know which one until
-+ * we have a look at the PM registers.
-+ */
-+static struct clk *main_clock;
-+
-+/*
-+ * Synchronous clocks are generated from the main clock. The clocks
-+ * must satisfy the constraint
-+ * fCPU >= fHSB >= fPB
-+ * i.e. each clock must not be faster than its parent.
-+ */
-+static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
-+{
-+ return main_clock->get_rate(main_clock) >> shift;
-+};
-+
-+static void cpu_clk_mode(struct clk *clk, int enabled)
-+{
-+ unsigned long flags;
-+ u32 mask;
-+
-+ spin_lock_irqsave(&pm_lock, flags);
-+
-+ while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_MSKRDY)))
-+ cpu_relax();
-+
-+ mask = pm_readl(CPUMASK);
-+ if (enabled)
-+ mask |= 1 << clk->index;
-+ else
-+ mask &= ~(1 << clk->index);
-+ pm_writel(CPUMASK, mask);
-+ spin_unlock_irqrestore(&pm_lock, flags);
-+}
-+
-+static unsigned long cpu_clk_get_rate(struct clk *clk)
-+{
-+ unsigned long cksel, shift = 0;
-+
-+ cksel = pm_readl(CKSEL);
-+ if (cksel & PM_BIT(CKSEL_CPUDIV))
-+ shift = PM_BFEXT(CKSEL_CPUSEL, cksel) + 1;
-+
-+ return bus_clk_get_rate(clk, shift);
-+}
-+
-+static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
-+{
-+ u32 control;
-+ unsigned long parent_rate, child_div, actual_rate, div;
-+
-+ parent_rate = clk->parent->get_rate(clk->parent);
-+ control = pm_readl(CKSEL);
-+
-+ if (control & PM_BIT(CKSEL_HSBDIV))
-+ child_div = 1 << (PM_BFEXT(CKSEL_HSBSEL, control) + 1);
-+ else
-+ child_div = 1;
-+
-+ if (rate > 3 * (parent_rate / 4) || child_div == 1) {
-+ actual_rate = parent_rate;
-+ control &= ~PM_BIT(CKSEL_CPUDIV);
-+ } else {
-+ unsigned int cpusel;
-+ div = (parent_rate + rate / 2) / rate;
-+ if (div > child_div)
-+ div = child_div;
-+ cpusel = (div > 1) ? (fls(div) - 2) : 0;
-+ control = PM_BIT(CKSEL_CPUDIV)
-+ | PM_BFINS(CKSEL_CPUSEL, cpusel, control);
-+ actual_rate = parent_rate / (1 << (cpusel + 1));
-+ }
-+
-+ pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
-+ clk->name, rate, actual_rate);
-+
-+ if (apply) {
-+ while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_CKRDY)))
-+ cpu_relax();
-+
-+ pm_writel(CKSEL, control);
-+ }
-+
-+ return actual_rate;
-+}
-+
-+static void hsb_clk_mode(struct clk *clk, int enabled)
-+{
-+ unsigned long flags;
-+ u32 mask;
-+
-+ spin_lock_irqsave(&pm_lock, flags);
-+
-+ while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_MSKRDY)))
-+ cpu_relax();
-+
-+ mask = pm_readl(HSBMASK);
-+ if (enabled)
-+ mask |= 1 << clk->index;
-+ else
-+ mask &= ~(1 << clk->index);
-+ pm_writel(HSBMASK, mask);
-+ spin_unlock_irqrestore(&pm_lock, flags);
-+}
-+
-+static unsigned long hsb_clk_get_rate(struct clk *clk)
-+{
-+ unsigned long cksel, shift = 0;
-+
-+ cksel = pm_readl(CKSEL);
-+ if (cksel & PM_BIT(CKSEL_HSBDIV))
-+ shift = PM_BFEXT(CKSEL_HSBSEL, cksel) + 1;
-+
-+ return bus_clk_get_rate(clk, shift);
-+}
-+
-+static void pba_clk_mode(struct clk *clk, int enabled)
-+{
-+ unsigned long flags;
-+ u32 mask;
-+
-+ spin_lock_irqsave(&pm_lock, flags);
-+
-+ while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_MSKRDY)))
-+ cpu_relax();
-+
-+ mask = pm_readl(PBAMASK);
-+ if (enabled)
-+ mask |= 1 << clk->index;
-+ else
-+ mask &= ~(1 << clk->index);
-+ pm_writel(PBAMASK, mask);
-+ spin_unlock_irqrestore(&pm_lock, flags);
-+}
-+
-+static unsigned long pba_clk_get_rate(struct clk *clk)
-+{
-+ unsigned long cksel, shift = 0;
-+
-+ cksel = pm_readl(CKSEL);
-+ if (cksel & PM_BIT(CKSEL_PBADIV))
-+ shift = PM_BFEXT(CKSEL_PBASEL, cksel) + 1;
-+
-+ return bus_clk_get_rate(clk, shift);
-+}
-+
-+static void pbb_clk_mode(struct clk *clk, int enabled)
-+{
-+ unsigned long flags;
-+ u32 mask;
-+
-+ spin_lock_irqsave(&pm_lock, flags);
-+
-+ while (!(pm_readl(POSCSR) & PM_BIT(POSCSR_MSKRDY)))
-+ cpu_relax();
-+
-+ mask = pm_readl(PBBMASK);
-+ if (enabled)
-+ mask |= 1 << clk->index;
-+ else
-+ mask &= ~(1 << clk->index);
-+ pm_writel(PBBMASK, mask);
-+ spin_unlock_irqrestore(&pm_lock, flags);
-+}
-+
-+static unsigned long pbb_clk_get_rate(struct clk *clk)
-+{
-+ unsigned long cksel, shift = 0;
-+
-+ cksel = pm_readl(CKSEL);
-+ if (cksel & PM_BIT(CKSEL_PBBDIV))
-+ shift = PM_BFEXT(CKSEL_PBBSEL, cksel) + 1;
-+
-+ return bus_clk_get_rate(clk, shift);
-+}
-+
-+static struct clk cpu_clk = {
-+ .name = "cpu",
-+ .get_rate = cpu_clk_get_rate,
-+ .set_rate = cpu_clk_set_rate,
-+ .users = 1,
-+};
-+static struct clk hsb_clk = {
-+ .name = "hsb",
-+ .parent = &cpu_clk,
-+ .get_rate = hsb_clk_get_rate,
-+};
-+static struct clk pba_clk = {
-+ .name = "pba",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = pba_clk_get_rate,
-+ .users = 1,
-+ .index = 1,
-+};
-+static struct clk pbb_clk = {
-+ .name = "pbb",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .users = 1,
-+ .index = 2,
-+};
-+static struct clk pbc_clk = {
-+ .name = "pbc",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 3,
-+};
-+
-+/* --------------------------------------------------------------------
-+ * Generic Clocks
-+ * -------------------------------------------------------------------- */
-+
-+/* Mapping from GCCTRL:OSCSEL values to parent clocks */
-+static struct clk *const genclk_parent[] = {
-+ &rcosc,
-+ &osc32,
-+ &osc0,
-+ &osc1,
-+ &osc2,
-+ &pll0,
-+ &pll1,
-+ &pll2,
-+ &cpu_clk,
-+ &hsb_clk,
-+ &pba_clk,
-+ &pbb_clk,
-+};
-+
-+#define NR_GENERIC_CLOCKS 8
-+
-+static void genclk_mode(struct clk *clk, int enabled)
-+{
-+ u32 control;
-+
-+ control = pm_readl(GCCTRL[clk->index]);
-+ if (enabled)
-+ control |= PM_BIT(GCCTRL_CEN);
-+ else
-+ control &= PM_BIT(GCCTRL_CEN);
-+ pm_writel(GCCTRL[clk->index], control);
-+}
-+
-+static unsigned long genclk_get_rate(struct clk *clk)
-+{
-+ u32 control;
-+ unsigned long div = 1;
-+
-+ control = pm_readl(GCCTRL[clk->index]);
-+ if (control & PM_BIT(GCCTRL_DIVEN))
-+ div = 2 * (PM_BFEXT(GCCTRL_DIV, control) + 1);
-+
-+ return clk->parent->get_rate(clk->parent) / div;
-+}
-+
-+static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
-+{
-+ unsigned long parent_rate;
-+ unsigned long actual_rate;
-+ unsigned long div;
-+ u32 control;
-+
-+ parent_rate = clk->parent->get_rate(clk->parent);
-+ control = pm_readl(GCCTRL[clk->index]);
-+
-+ if (rate > 3 * parent_rate / 4) {
-+ actual_rate = parent_rate;
-+ control &= ~PM_BIT(GCCTRL_DIVEN);
-+ } else {
-+ div = (parent_rate + rate) / (2 * rate) - 1;
-+ control = PM_BFINS(GCCTRL_DIV, div, control)
-+ | PM_BIT(GCCTRL_DIVEN);
-+ actual_rate = parent_rate / (2 * (div + 1));
-+ }
-+
-+ pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
-+ clk->name, rate, actual_rate);
-+
-+ if (apply)
-+ pm_writel(GCCTRL[clk->index], control);
-+
-+ return actual_rate;
-+}
-+
-+static int genclk_set_parent(struct clk *clk, struct clk *parent)
-+{
-+ unsigned int i;
-+ u32 control;
-+
-+ pr_debug("clk %s: new parent %s (was %s)\n",
-+ clk->name, parent->name,
-+ clk->parent ? clk->parent->name : "<none>");
-+
-+ control = pm_readl(GCCTRL[clk->index]);
-+
-+ for (i = 0; i < ARRAY_SIZE(genclk_parent); i++) {
-+ if (parent == genclk_parent[i]) {
-+ control = PM_BFINS(GCCTRL_OSCSEL, i, control);
-+ break;
-+ }
-+ }
-+
-+ if (i >= ARRAY_SIZE(genclk_parent))
-+ return -EINVAL;
-+
-+ pm_writel(GCCTRL[clk->index], control);
-+ clk->parent = parent;
-+
-+ return 0;
-+}
-+
-+#define DEFINE_GCLK(_name, i) \
-+ static struct clk _name = { \
-+ .name = #_name, \
-+ .mode = genclk_mode, \
-+ .get_rate = genclk_get_rate, \
-+ .set_rate = genclk_set_rate, \
-+ .set_parent = genclk_set_parent, \
-+ .index = i, \
-+ }
-+
-+DEFINE_GCLK(gclk0, 0);
-+DEFINE_GCLK(gclk1, 1);
-+DEFINE_GCLK(gclk2, 2);
-+DEFINE_GCLK(gclk3, 3);
-+DEFINE_GCLK(gclk4, 4);
-+DEFINE_GCLK(gclk5, 5);
-+
-+static void __init genclk_init_parent(struct clk *clk)
-+{
-+ unsigned int parent;
-+ u32 control;
-+
-+ BUG_ON(clk->index > NR_GENERIC_CLOCKS);
-+
-+ control = pm_readl(GCCTRL[clk->index]);
-+ parent = PM_BFEXT(GCCTRL_OSCSEL, control);
-+ if (parent >= ARRAY_SIZE(genclk_parent)) {
-+ /* Current parent is invalid. Reset to a sane value */
-+ parent = 0;
-+ control = PM_BF(GCCTRL_OSCSEL, parent);
-+ }
-+
-+ clk->parent = genclk_parent[parent];
-+}
-+
-+
-+/* --------------------------------------------------------------------
-+ * System peripherals
-+ * -------------------------------------------------------------------- */
-+static struct dw_dma_platform_data dw_dmac0_data = {
-+ .nr_channels = 4,
-+};
-+static struct pdca_pdata pdca_data = {
-+ .nr_channels = 20,
-+};
-+
-+static struct resource intc_resource[] = {
-+ PBMEM(0xffd00000),
-+};
-+static struct resource pm_resource[] = {
-+ PBMEM(0xffd00400),
-+ IRQ(10),
-+};
-+static struct resource sdc_resource[] = {
-+ PBMEM(0xffd00800),
-+ IRQ(45),
-+};
-+static struct resource ast0_resource[] = {
-+ PBMEM(0xffd00c00),
-+ IRQ(11),
-+};
-+static struct resource ast1_resource[] = {
-+ PBMEM(0xffd01000),
-+ IRQ(12),
-+};
-+static struct resource wdt_resource[] = {
-+ PBMEM(0xffd01400),
-+};
-+static struct resource gpio_resource[] = {
-+ PBMEM(0xffd02000),
-+ {
-+ .start = 16,
-+ .end = 19,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+static struct resource pdca_resource[] = {
-+ {
-+ .start = 0xffe00000,
-+ .end = 0xffe01fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(1),
-+};
-+static struct resource smc_resource[] = {
-+ PBMEM(0xffe04400),
-+};
-+static struct resource dw_dmac0_resource[] = {
-+ {
-+ .start = 0xff100000,
-+ .end = 0xff1003ff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(5),
-+};
-+
-+struct platform_device at32_intc0_device = {
-+ .name = "intc",
-+ .resource = intc_resource,
-+ .num_resources = ARRAY_SIZE(intc_resource),
-+};
-+static struct platform_device pm_device = {
-+ .name = "pm",
-+ .resource = pm_resource,
-+ .num_resources = ARRAY_SIZE(pm_resource),
-+};
-+static struct platform_device sdc_device = {
-+ .name = "sdc",
-+ .resource = sdc_resource,
-+ .num_resources = ARRAY_SIZE(sdc_resource),
-+};
-+static struct platform_device ast0_device = {
-+ .name = "rtc-ast",
-+ .id = 0,
-+ .resource = ast0_resource,
-+ .num_resources = ARRAY_SIZE(ast0_resource),
-+};
-+static struct platform_device ast1_device = {
-+ .name = "timer-ast",
-+ .id = 1,
-+ .resource = ast1_resource,
-+ .num_resources = ARRAY_SIZE(ast1_resource),
-+};
-+static struct platform_device wdt_device = {
-+ .name = "at32_wdt",
-+ .id = 0,
-+ .resource = wdt_resource,
-+ .num_resources = ARRAY_SIZE(wdt_resource),
-+};
-+static struct platform_device gpio_device = {
-+ .name = "gpio",
-+ .id = 0,
-+ .resource = gpio_resource,
-+ .num_resources = ARRAY_SIZE(gpio_resource),
-+};
-+static struct platform_device pdca_device = {
-+ .dev.platform_data = &pdca_data,
-+ .name = "atmel_pdca",
-+ .id = 0,
-+ .resource = pdca_resource,
-+ .num_resources = ARRAY_SIZE(pdca_resource),
-+};
-+static struct platform_device smc_device = {
-+ .name = "smc",
-+ .id = 0,
-+ .resource = smc_resource,
-+ .num_resources = ARRAY_SIZE(smc_resource),
-+};
-+static struct platform_device dw_dmac0_device = {
-+ .dev.platform_data = &dw_dmac0_data,
-+ .name = "dw_dmac",
-+ .id = 0,
-+ .resource = dw_dmac0_resource,
-+ .num_resources = ARRAY_SIZE(dw_dmac0_resource),
-+};
-+
-+DEV_CLK(pclk, at32_intc0, pba, 0);
-+DEV_CLK(pclk, pm, pba, 1);
-+DEV_CLK(pclk, sdc, pba, 2);
-+DEV_CLK(pclk, ast0, pba, 3);
-+DEV_CLK(pclk, ast1, pba, 4);
-+DEV_CLK(pclk, wdt, pba, 5);
-+DEV_CLK(pclk, gpio, pba, 8);
-+DEV_CLK(hclk, pdca, hsb, 9);
-+DEV_CLK(pclk, pdca, pbb, 0);
-+DEV_CLK(pclk, smc, pbb, 5);
-+DEV_CLK(hclk, dw_dmac0, hsb, 10);
-+
-+static struct clk ebi_hclk = {
-+ .name = "ebi_hclk",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = hsb_clk_get_rate,
-+ .users = 1,
-+};
-+static struct clk hramc_clk = {
-+ .name = "hramc",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = hsb_clk_get_rate,
-+ .users = 1,
-+ .index = 4,
-+};
-+static struct clk sdramc_clk = {
-+ .name = "sdramc_clk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .users = 1,
-+ .index = 6,
-+};
-+
-+static int __init system_device_init(void)
-+{
-+ platform_device_register(&at32_intc0_device);
-+ platform_device_register(&pm_device);
-+ platform_device_register(&sdc_device);
-+ platform_device_register(&ast0_device);
-+ platform_device_register(&ast1_device);
-+ platform_device_register(&wdt_device);
-+ platform_device_register(&gpio_device);
-+ platform_device_register(&pdca_device);
-+ platform_device_register(&smc_device);
-+ platform_device_register(&dw_dmac0_device);
-+
-+ return 0;
-+}
-+core_initcall(system_device_init);
-+
-+/* --------------------------------------------------------------------
-+ * HMATRIX
-+ * -------------------------------------------------------------------- */
-+
-+struct clk at32_hmatrix_clk = {
-+ .name = "hmatrix_clk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 8,
-+ .users = 0,
-+};
-+
-+/* --------------------------------------------------------------------
-+ * USART
-+ * -------------------------------------------------------------------- */
-+
-+static struct atmel_uart_data atmel_usart0_data = {
-+ .use_dma_tx = 0,
-+ .use_dma_rx = 0,
-+};
-+static struct resource atmel_usart0_resource[] = {
-+ PBMEM(0xffd03000),
-+ IRQ(24),
-+};
-+static struct platform_device atmel_usart0_device = {
-+ .name = "atmel_usart",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &atmel_usart0_data,
-+ },
-+ .resource = atmel_usart0_resource,
-+ .num_resources = ARRAY_SIZE(atmel_usart0_resource),
-+};
-+DEV_CLK(usart, atmel_usart0, pba, 9);
-+
-+static struct atmel_uart_data atmel_usart1_data = {
-+ .use_dma_tx = 0,
-+ .use_dma_rx = 0,
-+};
-+static struct resource atmel_usart1_resource[] = {
-+ PBMEM(0xffd03400),
-+ IRQ(25),
-+};
-+static struct platform_device atmel_usart1_device = {
-+ .name = "atmel_usart",
-+ .id = 1,
-+ .dev = {
-+ .platform_data = &atmel_usart1_data,
-+ },
-+ .resource = atmel_usart1_resource,
-+ .num_resources = ARRAY_SIZE(atmel_usart1_resource),
-+};
-+DEV_CLK(usart, atmel_usart1, pba, 10);
-+
-+static struct atmel_uart_data atmel_usart2_data = {
-+ .use_dma_tx = 0,
-+ .use_dma_rx = 0,
-+};
-+static struct resource atmel_usart2_resource[] = {
-+ PBMEM(0xffd03800),
-+ IRQ(26),
-+};
-+static struct platform_device atmel_usart2_device = {
-+ .name = "atmel_usart",
-+ .id = 2,
-+ .dev = {
-+ .platform_data = &atmel_usart2_data,
-+ },
-+ .resource = atmel_usart2_resource,
-+ .num_resources = ARRAY_SIZE(atmel_usart2_resource),
-+};
-+DEV_CLK(usart, atmel_usart2, pba, 11);
-+
-+static struct atmel_uart_data atmel_usart3_data = {
-+ .use_dma_tx = 0,
-+ .use_dma_rx = 0,
-+};
-+static struct resource atmel_usart3_resource[] = {
-+ PBMEM(0xffd03c00),
-+ IRQ(27),
-+};
-+static struct platform_device atmel_usart3_device = {
-+ .name = "atmel_usart",
-+ .id = 3,
-+ .dev = {
-+ .platform_data = &atmel_usart3_data,
-+ },
-+ .resource = atmel_usart3_resource,
-+ .num_resources = ARRAY_SIZE(atmel_usart3_resource),
-+};
-+DEV_CLK(usart, atmel_usart3, pba, 12);
-+
-+static struct atmel_uart_data atmel_usart4_data = {
-+ .use_dma_tx = 0,
-+ .use_dma_rx = 0,
-+};
-+static struct resource atmel_usart4_resource[] = {
-+ PBMEM(0xffd04000),
-+ IRQ(28),
-+};
-+static struct platform_device atmel_usart4_device = {
-+ .name = "atmel_usart",
-+ .id = 4,
-+ .dev = {
-+ .platform_data = &atmel_usart4_data,
-+ },
-+ .resource = atmel_usart4_resource,
-+ .num_resources = ARRAY_SIZE(atmel_usart4_resource),
-+};
-+DEV_CLK(usart, atmel_usart4, pba, 13);
-+
-+static struct atmel_uart_data atmel_usart5_data = {
-+ .use_dma_tx = 0,
-+ .use_dma_rx = 0,
-+};
-+static struct resource atmel_usart5_resource[] = {
-+ PBMEM(0xffd04400),
-+ IRQ(29),
-+};
-+static struct platform_device atmel_usart5_device = {
-+ .name = "atmel_usart",
-+ .id = 5,
-+ .dev = {
-+ .platform_data = &atmel_usart5_data,
-+ },
-+ .resource = atmel_usart5_resource,
-+ .num_resources = ARRAY_SIZE(atmel_usart5_resource),
-+};
-+DEV_CLK(usart, atmel_usart5, pba, 14);
-+
-+static void __init configure_usart0_pins(void)
-+{
-+ /* RXD | TXD */
-+ select_peripheral(PB, (1 << 14) | (1 << 15), PERIPH_B, 0);
-+}
-+
-+static void __init configure_usart1_pins(void)
-+{
-+ /* TXD | RXD */
-+ select_peripheral(PA, (1 << 8) | (1 << 9), PERIPH_A, 0);
-+}
-+
-+static void __init configure_usart2_pins(void)
-+{
-+ /* TXD | RXD */
-+ select_peripheral(PA, (1 << 16) | (1 << 17), PERIPH_A, 0);
-+}
-+
-+static void __init configure_usart3_pins(void)
-+{
-+ /* RXD | TXD */
-+ select_peripheral(PC, (1 << 10) | (1 << 11), PERIPH_A, 0);
-+}
-+
-+static void __init configure_usart4_pins(void)
-+{
-+ /* TXD | RXD */
-+ select_peripheral(PA, (1 << 14) | (1 << 15), PERIPH_A, 0);
-+}
-+
-+static void __init configure_usart5_pins(void)
-+{
-+ /* RXD | TXD */
-+ select_peripheral(PA, (1 << 22) | (1 << 23), PERIPH_A, 0);
-+}
-+
-+static struct platform_device *__initdata at32_usarts[6];
-+
-+void __init at32_map_usart(unsigned int hw_id, unsigned int line)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (hw_id) {
-+ case 0:
-+ pdev = &atmel_usart0_device;
-+ configure_usart0_pins();
-+ break;
-+ case 1:
-+ pdev = &atmel_usart1_device;
-+ configure_usart1_pins();
-+ break;
-+ case 2:
-+ pdev = &atmel_usart2_device;
-+ configure_usart2_pins();
-+ break;
-+ case 3:
-+ pdev = &atmel_usart3_device;
-+ configure_usart3_pins();
-+ break;
-+ case 4:
-+ pdev = &atmel_usart4_device;
-+ configure_usart4_pins();
-+ break;
-+ case 5:
-+ pdev = &atmel_usart5_device;
-+ configure_usart5_pins();
-+ break;
-+ default:
-+ return;
-+ }
-+
-+ if (PXSEG(pdev->resource[0].start) == P4SEG) {
-+ /* Addresses in the P4 segment are permanently mapped 1:1 */
-+ struct atmel_uart_data *data = pdev->dev.platform_data;
-+ data->regs = (void __iomem __force *)pdev->resource[0].start;
-+ }
-+
-+ pdev->id = line;
-+ at32_usarts[line] = pdev;
-+}
-+
-+struct platform_device *__init at32_add_device_usart(unsigned int id)
-+{
-+ platform_device_register(at32_usarts[id]);
-+ return at32_usarts[id];
-+}
-+
-+struct platform_device *atmel_default_console_device;
-+
-+void __init at32_setup_serial_console(unsigned int usart_id)
-+{
-+ atmel_default_console_device = at32_usarts[usart_id];
-+}
-+
-+/* --------------------------------------------------------------------
-+ * Ethernet
-+ * -------------------------------------------------------------------- */
-+
-+static u64 macb0_dma_mask = DMA_32BIT_MASK;
-+static struct resource macb0_resource[] __initdata = {
-+ PBMEM(0xffe04000),
-+ IRQ(8),
-+};
-+static struct clk macb0_hclk = {
-+ .name = "hclk",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = hsb_clk_get_rate,
-+ .index = 8,
-+};
-+static struct clk macb0_pclk = {
-+ .name = "pclk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 4,
-+};
-+
-+struct platform_device *__init
-+at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
-+{
-+ struct platform_device *pdev;
-+ u32 pin_mask_a;
-+ u32 pin_mask_c;
-+
-+ if (id != 0 || !data)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("macb", id);
-+ if (!pdev)
-+ return NULL;
-+
-+ if (platform_device_add_resources(pdev, macb0_resource,
-+ ARRAY_SIZE(macb0_resource)))
-+ goto out_free_pdev;
-+
-+ if (platform_device_add_data(pdev, data,
-+ sizeof(struct eth_platform_data)))
-+ goto out_free_pdev;
-+
-+ pin_mask_a = (1 << 4); /* RXDV */
-+ pin_mask_c = (1 << 10); /* MDC */
-+ pin_mask_c |= (1 << 11); /* MDIO */
-+ pin_mask_c |= (1 << 12); /* TXCK */
-+ pin_mask_c |= (1 << 14); /* RXD0 */
-+ pin_mask_c |= (1 << 15); /* RXD1 */
-+ pin_mask_c |= (1 << 16); /* RXER */
-+ pin_mask_c |= (1 << 18); /* TXEN */
-+ pin_mask_c |= (1 << 19); /* TXD0 */
-+ pin_mask_c |= (1 << 20); /* TXD1 */
-+
-+ if (!data->is_rmii) {
-+ pin_mask_a |= (1<<0); /* COL */
-+ pin_mask_a |= (1<<1); /* RXD2 */
-+ pin_mask_a |= (1<<2); /* RXD3 */
-+ pin_mask_a |= (1<<3); /* RXCK */
-+ pin_mask_a |= (1<<5); /* TXER */
-+ pin_mask_a |= (1<<6); /* TXD2 */
-+ pin_mask_a |= (1<<7); /* TXD3 */
-+ pin_mask_c |= (1<<13); /* CRS */
-+ pin_mask_c |= (1<<17); /* SPD */
-+ }
-+
-+ select_peripheral(PA, pin_mask_a, PERIPH_B, 0);
-+ select_peripheral(PC, pin_mask_c, PERIPH_C, 0);
-+
-+ pdev->dev.dma_mask = &macb0_dma_mask;
-+ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
-+
-+ macb0_hclk.dev = &pdev->dev;
-+ macb0_pclk.dev = &pdev->dev;
-+
-+ platform_device_add(pdev);
-+
-+ return pdev;
-+
-+out_free_pdev:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * SPI
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_spi_resource[][2] __initdata = {
-+ {
-+ PBMEM(0xffe05400),
-+ IRQ(36),
-+ }, {
-+ PBMEM(0xffe05800),
-+ IRQ(37),
-+ }, {
-+ PBMEM(0xffe05c00),
-+ IRQ(38),
-+ }, {
-+ PBMEM(0xffe06000),
-+ IRQ(39),
-+ }
-+};
-+static struct clk atmel_spi_clk[] = {
-+ {
-+ .name = "spi_clk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 9,
-+ }, {
-+ .name = "spi_clk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 10,
-+ }, {
-+ .name = "spi_clk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 11,
-+ }, {
-+ .name = "spi_clk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 12,
-+ }
-+};
-+static int __initdata atmel_spi_pins[][4] = {
-+ {
-+ /* SPI0 */
-+ GPIO_PIN_PB(3), GPIO_PIN_PB(4),
-+ GPIO_PIN_PB(5), GPIO_PIN_PB(6),
-+ }, {
-+ /* SPI1 */
-+ GPIO_PIN_PB(4), -1, -1, -1,
-+ }, {
-+ /* SPI2 */
-+ GPIO_PIN_PA(28), -1, -1, -1,
-+ }, {
-+ /* SPI3 */
-+ GPIO_PIN_PA(27), GPIO_PIN_PA(20),
-+ GPIO_PIN_PA(29), GPIO_PIN_PA(30),
-+ }
-+};
-+
-+
-+static void __init at32_spi_setup_dw_dma(unsigned int id,
-+ struct atmel_spi_pdata *pdata)
-+{
-+ struct dw_dma_slave *rx_dws;
-+ struct dw_dma_slave *tx_dws;
-+
-+ if (pdata->rx_dma_slave)
-+ rx_dws = kmemdup(to_dw_dma_slave(pdata->rx_dma_slave),
-+ sizeof(struct dw_dma_slave), GFP_KERNEL);
-+ else
-+ rx_dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL);
-+ if (pdata->tx_dma_slave)
-+ tx_dws = kmemdup(to_dw_dma_slave(pdata->tx_dma_slave),
-+ sizeof(struct dw_dma_slave), GFP_KERNEL);
-+ else
-+ tx_dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL);
-+
-+ rx_dws->slave.dma_dev = tx_dws->slave.dma_dev = &dw_dmac0_device.dev;
-+ rx_dws->slave.reg_width = tx_dws->slave.reg_width
-+ = DMA_SLAVE_WIDTH_8BIT;
-+
-+ rx_dws->cfg_hi = DWC_CFGH_SRC_PER(2);
-+ tx_dws->cfg_hi = DWC_CFGH_DST_PER(3);
-+ rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL
-+ | DWC_CFGL_HS_SRC_POL);
-+ tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL
-+ | DWC_CFGL_HS_SRC_POL);
-+
-+ pdata->rx_dma_slave = &rx_dws->slave;
-+ pdata->tx_dma_slave = &tx_dws->slave;
-+}
-+
-+static void __init at32_spi_setup_pdca(unsigned int id,
-+ struct atmel_spi_pdata *pdata)
-+{
-+ struct pdca_slave *rx_pslave;
-+ struct pdca_slave *tx_pslave;
-+
-+ if (pdata->rx_dma_slave)
-+ rx_pslave = kmemdup(dma_to_pdca_slave(pdata->rx_dma_slave),
-+ sizeof(struct pdca_slave), GFP_KERNEL);
-+ else
-+ rx_pslave = kzalloc(sizeof(struct pdca_slave), GFP_KERNEL);
-+ if (pdata->tx_dma_slave)
-+ tx_pslave = kmemdup(dma_to_pdca_slave(pdata->tx_dma_slave),
-+ sizeof(struct pdca_slave), GFP_KERNEL);
-+ else
-+ tx_pslave = kzalloc(sizeof(struct pdca_slave), GFP_KERNEL);
-+
-+ rx_pslave->slave.dma_dev = &pdca_device.dev;
-+ tx_pslave->slave.dma_dev = &pdca_device.dev;
-+ rx_pslave->slave.reg_width = DMA_SLAVE_WIDTH_8BIT;
-+ tx_pslave->slave.reg_width = DMA_SLAVE_WIDTH_8BIT;
-+
-+ rx_pslave->tx_periph_id = -1;
-+ tx_pslave->rx_periph_id = -1;
-+
-+ switch (id) {
-+ case 1:
-+ rx_pslave->rx_periph_id = 6;
-+ tx_pslave->tx_periph_id = 17;
-+ break;
-+ case 2:
-+ rx_pslave->rx_periph_id = 7;
-+ tx_pslave->tx_periph_id = 18;
-+ break;
-+ case 3:
-+ rx_pslave->rx_periph_id = 8;
-+ tx_pslave->tx_periph_id = 19;
-+ break;
-+ }
-+
-+ pdata->rx_dma_slave = &rx_pslave->slave;
-+ pdata->tx_dma_slave = &tx_pslave->slave;
-+}
-+
-+static void __init
-+at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
-+ unsigned int n, const int *pins)
-+{
-+ unsigned int mode;
-+ unsigned int cs;
-+ int pin;
-+
-+ for (; n; n--, b++) {
-+ b->bus_num = bus_num;
-+ cs = b->chip_select;
-+ if (cs >= 4 || !gpio_is_valid(pins[cs]))
-+ continue;
-+
-+ pin = (int)b->controller_data;
-+ if (!pin || !gpio_is_valid(pin)) {
-+ pin = pins[cs];
-+ b->controller_data = (void *)pin;
-+ }
-+
-+ mode = AT32_GPIOF_OUTPUT;
-+ if (!(b->mode & SPI_CS_HIGH))
-+ mode |= AT32_GPIOF_HIGH;
-+ at32_select_gpio(pin, mode);
-+ }
-+}
-+
-+struct platform_device *__init at32_add_device_spi(unsigned int id,
-+ struct spi_board_info *b, unsigned int n)
-+{
-+ struct atmel_spi_pdata pdata;
-+ struct platform_device *pdev;
-+
-+ BUILD_BUG_ON(ARRAY_SIZE(atmel_spi_resource)
-+ != ARRAY_SIZE(atmel_spi_clk));
-+
-+ if (id >= ARRAY_SIZE(atmel_spi_resource))
-+ return NULL;
-+
-+ pdev = platform_device_alloc("atmel_spi", id);
-+ if (!pdev)
-+ goto fail;
-+
-+ if (platform_device_add_resources(pdev, atmel_spi_resource[id],
-+ ARRAY_SIZE(atmel_spi_resource[id])))
-+ goto fail;
-+
-+ memset(&pdata, 0, sizeof(struct atmel_spi_pdata));
-+
-+ if (id == 0)
-+ at32_spi_setup_dw_dma(id, &pdata);
-+ else
-+ at32_spi_setup_pdca(id, &pdata);
-+ pdata.rx_dma_slave->dev = pdata.tx_dma_slave->dev = &pdev->dev;
-+
-+ if (platform_device_add_data(pdev, &pdata,
-+ sizeof(struct atmel_spi_pdata)))
-+ goto fail;
-+
-+ switch (id) {
-+ case 0:
-+ /* pullup MISO so a level is always defined */
-+ select_peripheral(PB, (1 << 1), PERIPH_A, AT32_GPIOF_PULLUP);
-+ /* MOSI | SCK */
-+ select_peripheral(PB, (1 << 0) | (1 << 2), PERIPH_A, 0);
-+
-+ at32_spi_setup_slaves(0, b, n, atmel_spi_pins[0]);
-+ break;
-+
-+ case 1:
-+ /* pullup MISO so a level is always defined */
-+ select_peripheral(PB, (1 << 7), PERIPH_B, AT32_GPIOF_PULLUP);
-+ /* MOSI | SCK */
-+ select_peripheral(PB, (1 << 6) | (1 << 5), PERIPH_B, 0);
-+
-+ at32_spi_setup_slaves(1, b, n, atmel_spi_pins[1]);
-+ break;
-+
-+ case 2:
-+ /* pullup MISO so a level is always defined */
-+ select_peripheral(PA, (1 << 30), PERIPH_B, AT32_GPIOF_PULLUP);
-+ /* MOSI | SCK */
-+ select_peripheral(PA, (1 << 31) || (1 << 29), PERIPH_B, 0);
-+
-+ at32_spi_setup_slaves(2, b, n, atmel_spi_pins[2]);
-+ break;
-+
-+ case 3:
-+ /* pullup MISO so a level is always defined */
-+ select_peripheral(PA, (1 << 25), PERIPH_A, AT32_GPIOF_PULLUP);
-+ /* MOSI | SCK */
-+ select_peripheral(PA, (1 << 24) | (1 << 26), PERIPH_A, 0);
-+
-+ at32_spi_setup_slaves(3, b, n, atmel_spi_pins[3]);
-+ break;
-+
-+ default:
-+ goto fail;
-+ }
-+
-+ atmel_spi_clk[id].dev = &pdev->dev;
-+ spi_register_board_info(b, n);
-+ platform_device_add(pdev);
-+
-+ return pdev;
-+
-+fail:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * MMC
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_mci0_resource[] __initdata = {
-+ PBMEM(0xfff00000),
-+ IRQ(43),
-+};
-+/* MCI is on the PBC bus, but it is controlled by the PBBMASK register */
-+static struct clk atmel_mci0_pclk = {
-+ .name = "mci_clk",
-+ .parent = &pbc_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 16,
-+};
-+
-+struct platform_device *__init
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
-+{
-+ struct platform_device *pdev;
-+ struct dw_dma_slave *dws;
-+ u32 pin_mask_1 = 0;
-+ u32 pin_mask_2 = 0;
-+
-+ if (id != 0)
-+ return NULL;
-+
-+ /* Must have at least one usable slot */
-+ if (!data->slot[0].bus_width && !data->slot[1].bus_width)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("atmel_mci", id);
-+ if (!pdev)
-+ goto fail;
-+
-+ if (platform_device_add_resources(pdev, atmel_mci0_resource,
-+ ARRAY_SIZE(atmel_mci0_resource)))
-+ goto fail;
-+
-+ if (data->dma_slave)
-+ dws = kmemdup(to_dw_dma_slave(data->dma_slave),
-+ sizeof(struct dw_dma_slave), GFP_KERNEL);
-+ else
-+ dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL);
-+
-+ dws->slave.dev = &pdev->dev;
-+ dws->slave.dma_dev = &dw_dmac0_device.dev;
-+ dws->slave.reg_width = DMA_SLAVE_WIDTH_32BIT;
-+ dws->cfg_hi = (DWC_CFGH_SRC_PER(0)
-+ | DWC_CFGH_DST_PER(1));
-+ dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL
-+ | DWC_CFGL_HS_SRC_POL);
-+
-+ data->dma_slave = &dws->slave;
-+
-+ if (platform_device_add_data(pdev, data,
-+ sizeof(struct mci_platform_data)))
-+ goto fail;
-+
-+ switch (data->slot[0].bus_width) {
-+ case 8:
-+ pin_mask_1 |= (1 << 20); /* DATA4 */
-+ pin_mask_1 |= (1 << 21); /* DATA5 */
-+ pin_mask_1 |= (1 << 22); /* DATA6 */
-+ pin_mask_1 |= (1 << 23); /* DATA7 */
-+ /* fall through */
-+ case 4:
-+ pin_mask_2 |= (1 << 19); /* DATA1 */
-+ pin_mask_2 |= (1 << 20); /* DATA2 */
-+ pin_mask_2 |= (1 << 21); /* DATA3 */
-+ /* fall through */
-+ case 1:
-+ pin_mask_2 |= (1 << 18); /* DATA0 */
-+ pin_mask_2 |= (1 << 17); /* CMD */
-+
-+ select_peripheral(PA, pin_mask_1, PERIPH_D, AT32_GPIOF_PULLUP);
-+ select_peripheral(PB, pin_mask_2, PERIPH_A, AT32_GPIOF_PULLUP);
-+ select_peripheral(PB, (1 << 16), PERIPH_A, 0); /* CLK */
-+
-+ if (gpio_is_valid(data->slot[0].detect_pin))
-+ at32_select_gpio(data->slot[0].detect_pin, 0);
-+ if (gpio_is_valid(data->slot[0].wp_pin))
-+ at32_select_gpio(data->slot[0].wp_pin, 0);
-+
-+ break;
-+ case 0:
-+ /* Slot is unused */
-+ break;
-+ default:
-+ goto fail;
-+ }
-+
-+ pin_mask_1 = 0;
-+
-+ switch (data->slot[1].bus_width) {
-+ case 8:
-+ pin_mask_1 |= (1 << 9); /* DATA7 */
-+ pin_mask_1 |= (1 << 8); /* DATA6 */
-+ pin_mask_1 |= (1 << 7); /* DATA5 */
-+ pin_mask_1 |= (1 << 6); /* DATA4 */
-+ /* fall through */
-+ case 4:
-+ pin_mask_1 |= (1 << 5); /* DATA3 */
-+ pin_mask_1 |= (1 << 4); /* DATA2 */
-+ pin_mask_1 |= (1 << 3); /* DATA1 */
-+ /* fall through */
-+ case 1:
-+ pin_mask_1 |= (1 << 2); /* DATA0 */
-+ pin_mask_1 |= (1 << 1); /* CMD */
-+
-+ select_peripheral(PC, pin_mask_1, PERIPH_A, AT32_GPIOF_PULLUP);
-+ select_peripheral(PC, (1 << 0), PERIPH_A, 0); /* CLK */
-+
-+ if (gpio_is_valid(data->slot[1].detect_pin))
-+ at32_select_gpio(data->slot[1].detect_pin, 0);
-+ if (gpio_is_valid(data->slot[1].wp_pin))
-+ at32_select_gpio(data->slot[1].wp_pin, 0);
-+
-+ break;
-+ case 0:
-+ /* Slot is unused */
-+ break;
-+ default:
-+ goto fail;
-+ }
-+
-+ atmel_mci0_pclk.dev = &pdev->dev;
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+fail:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * LCDC
-+ * -------------------------------------------------------------------- */
-+static u64 atmel_lcdfb0_dma_mask = DMA_32BIT_MASK;
-+static struct resource atmel_lcdfb0_resource[] __initdata = {
-+ {
-+ .start = 0xff000000,
-+ .end = 0xff000fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(3),
-+ {
-+ /* Placeholder for pre-allocated fb memory */
-+ .start = 0x00000000,
-+ .end = 0x00000000,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct clk atmel_lcdfb0_hck1 = {
-+ .name = "hck1",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = hsb_clk_get_rate,
-+ .index = 7,
-+};
-+static struct clk atmel_lcdfb0_pixclk = {
-+ .name = "lcdc_clk",
-+ .mode = genclk_mode,
-+ .get_rate = genclk_get_rate,
-+ .set_rate = genclk_set_rate,
-+ .set_parent = genclk_set_parent,
-+ .index = 6,
-+};
-+
-+struct platform_device *__init
-+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-+ unsigned long fbmem_start, unsigned long fbmem_len,
-+ u64 pin_mask)
-+{
-+ struct {
-+ struct atmel_lcdfb_info info;
-+ struct fb_monspecs monspecs;
-+ struct fb_videomode modedb[0];
-+ } *all_data;
-+ struct platform_device *pdev;
-+ unsigned int data_size;
-+ unsigned int modedb_size;
-+ unsigned int num_resources;
-+ int ret;
-+
-+ if (id > 0 || !data)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("atmel_lcdfb", id);
-+ if (!pdev)
-+ return NULL;
-+
-+ num_resources = ARRAY_SIZE(atmel_lcdfb0_resource);
-+ if (fbmem_len) {
-+ atmel_lcdfb0_resource[num_resources - 1].start = fbmem_start;
-+ atmel_lcdfb0_resource[num_resources - 1].end
-+ = fbmem_start + fbmem_len - 1;
-+ } else {
-+ num_resources--;
-+ }
-+
-+ if (platform_device_add_resources(pdev, atmel_lcdfb0_resource,
-+ num_resources))
-+ goto error;
-+
-+ /*
-+ * Allocate all data -- info struct, monspecs and modedb -- in
-+ * a single chunk.
-+ */
-+ modedb_size = data->default_monspecs->modedb_len
-+ * sizeof(struct fb_videomode);
-+ data_size = sizeof(*all_data) + modedb_size;
-+ all_data = kmalloc(data_size, GFP_KERNEL);
-+ if (!all_data)
-+ goto error;
-+
-+ memcpy(&all_data->info, data, sizeof(struct atmel_lcdfb_info));
-+ memcpy(&all_data->monspecs, data->default_monspecs,
-+ sizeof(struct fb_monspecs));
-+ memcpy(&all_data->modedb, data->default_monspecs->modedb, modedb_size);
-+
-+ ret = platform_device_add_data(pdev, all_data, data_size);
-+ kfree(all_data);
-+ if (ret)
-+ goto error;
-+
-+ /*
-+ * Update internal pointers to use memory allocated by
-+ * platform_device_add_data().
-+ */
-+ all_data = pdev->dev.platform_data;
-+ all_data->info.default_monspecs = &all_data->monspecs;
-+ all_data->monspecs.modedb = all_data->modedb;
-+
-+ select_peripheral(PD, 0x7fffffff, PERIPH_A, 0);
-+
-+ pdev->dev.dma_mask = &atmel_lcdfb0_dma_mask;
-+ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
-+
-+ atmel_lcdfb0_hck1.dev = &pdev->dev;
-+ atmel_lcdfb0_pixclk.dev = &pdev->dev;
-+
-+ clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
-+ clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+error:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * Media Post-Processor (MPOP)
-+ * -------------------------------------------------------------------- */
-+
-+static u64 atmel_mpopfb0_dma_mask = DMA_32BIT_MASK;
-+static struct resource atmel_mpopfb0_resource[] = {
-+ {
-+ /* Configuration interface */
-+ .start = 0xffe02000,
-+ .end = 0xffe02fff,
-+ .flags = IORESOURCE_MEM,
-+ }, {
-+ /* Data interface (output) */
-+ .start = 0xf0000000,
-+ .end = 0xf0ffffff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(4),
-+ {
-+ /* Placeholder for pre-allocated fb memory */
-+ .start = 0x00000000,
-+ .end = 0x00000000,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct clk atmel_mpopfb0_hclk = {
-+ .name = "hclk",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = hsb_clk_get_rate,
-+ .index = 12,
-+};
-+static struct clk atmel_mpopfb0_pclk = {
-+ .name = "pclk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 2,
-+};
-+
-+struct platform_device *__init at32_add_device_mpop(unsigned int id,
-+ struct platform_device *lcdc_pdev,
-+ unsigned long fbmem_start, unsigned long fbmem_len)
-+{
-+ struct platform_device *pdev;
-+ struct atmel_mpopfb_info info;
-+ unsigned int num_resources;
-+
-+ if (id != 0)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("atmel_mpopfb", id);
-+ if (!pdev)
-+ return NULL;
-+
-+ num_resources = ARRAY_SIZE(atmel_mpopfb0_resource);
-+ if (fbmem_len) {
-+ atmel_mpopfb0_resource[num_resources - 1].start = fbmem_start;
-+ atmel_mpopfb0_resource[num_resources - 1].end
-+ = fbmem_start + fbmem_len - 1;
-+ } else {
-+ num_resources--;
-+ }
-+ if (platform_device_add_resources(pdev, atmel_mpopfb0_resource,
-+ num_resources))
-+ goto error;
-+
-+ info.lcdc_pdev = lcdc_pdev;
-+ if (platform_device_add_data(pdev, &info, sizeof(info)))
-+ goto error;
-+
-+ pdev->dev.dma_mask = &atmel_mpopfb0_dma_mask;
-+ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
-+
-+ atmel_mpopfb0_hclk.dev = &pdev->dev;
-+ atmel_mpopfb0_pclk.dev = &pdev->dev;
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+error:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* -------------------------------------------------------------------
-+ * USB Host (OHCI/EHCI)
-+ * ------------------------------------------------------------------- */
-+
-+static u64 usbh_dma_mask = DMA_32BIT_MASK;
-+
-+static unsigned long parent_clk_get_rate(struct clk *clk)
-+{
-+ return clk->parent->get_rate(clk->parent);
-+}
-+
-+static void parent_clk_mode(struct clk *clk, int enabled)
-+{
-+ /* Parent clk enabled by clk core */
-+}
-+
-+/*
-+ * The UTMI clock is an internally controlled PLL. It is hardwired to
-+ * OSC2 and will run at 30 MHz or 60 MHz depending on the internal
-+ * UTMI <-> host controller data bus width.
-+ *
-+ * We can turn it on and off through the Power Manager. That's all.
-+ */
-+static void utmi_clk_mode(struct clk *clk, int enabled)
-+{
-+ u32 ppcr = pm_readl(PPCR);
-+
-+ if (enabled)
-+ /* Clear UTMI suspend signal */
-+ ppcr |= PM_BIT(PPCR_UTMI_CTRL);
-+ else
-+ /* Set UTMI suspend signal */
-+ ppcr &= ~PM_BIT(PPCR_UTMI_CTRL);
-+
-+ pm_writel(PPCR, ppcr | PM_BF(PPCR_KEY, 0x55));
-+ pm_writel(PPCR, ppcr | PM_BF(PPCR_KEY, 0xaa));
-+
-+ if (enabled)
-+ /* PLL startup time is 2.5 ms */
-+ udelay(2500);
-+}
-+
-+static unsigned long utmi_clk_get_rate(struct clk *clk)
-+{
-+ /*
-+ * Not sure about this, but I think the UTMI interface on
-+ * AP7200 is 16 bits wide, which means 30 MHz PHY clock.
-+ */
-+ return 30000000;
-+}
-+
-+static struct clk usbh_utmi_clk = {
-+ .name = "usbh_utmi_clk",
-+ .parent = &osc2,
-+ .mode = utmi_clk_mode,
-+ .get_rate = utmi_clk_get_rate,
-+};
-+
-+static struct clk usbh_hclk = {
-+ .name = "usbh_hclk",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = hsb_clk_get_rate,
-+ .index = 6,
-+};
-+
-+/*
-+ * UTMI and HSB clocks are shared between OHCI and EHCI. These wrappers
-+ * make sure both can use the clocks as if they had their own.
-+ */
-+static struct clk ohci_utmi_clk = {
-+ .name = "utmi_clk",
-+ .parent = &usbh_utmi_clk,
-+ .mode = parent_clk_mode,
-+ .get_rate = parent_clk_get_rate,
-+};
-+static struct clk ohci_hclk = {
-+ .name = "hclk",
-+ .parent = &usbh_hclk,
-+ .mode = parent_clk_mode,
-+ .get_rate = parent_clk_get_rate,
-+};
-+
-+static struct clk ehci_utmi_clk = {
-+ .name = "utmi_clk",
-+ .parent = &usbh_utmi_clk,
-+ .mode = parent_clk_mode,
-+ .get_rate = parent_clk_get_rate,
-+};
-+static struct clk ehci_hclk = {
-+ .name = "hclk",
-+ .parent = &usbh_hclk,
-+ .mode = parent_clk_mode,
-+ .get_rate = parent_clk_get_rate,
-+};
-+
-+/*
-+ * The USBH needs both a 48 MHz and a 12 MHz clock, and the 12 MHz
-+ * must be generated by dividing the 48 MHz clock. There's only one
-+ * generic clock hooked up to the USBH which we must use to generate
-+ * both.
-+ *
-+ * This can be done because GCLK0 generates an additional "divided
-+ * clock", which is the normal clock output further divided by four
-+ * (this is hardcoded, but not surprisingly, exactly what we need.)
-+ *
-+ * So we generate the clocks as follows:
-+ * OSC2 (12 MHz) -> PLL2 (48 MHz) --> GCLK0 undivided (48 MHz)
-+ * |-> GCLK0 divided (12 MHz)
-+ *
-+ * This clock is only used by the OHCI part of the controller, not the
-+ * EHCI part.
-+ */
-+static struct clk ohci_gclk = {
-+ .name = "ohci_clk",
-+ .parent = &gclk0,
-+ .mode = parent_clk_mode,
-+ .get_rate = parent_clk_get_rate,
-+};
-+
-+static struct resource usbh_ohci_resource[] __initdata = {
-+ {
-+ .start = 0xff400000,
-+ .end = 0xff400400,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(7),
-+};
-+
-+static struct resource usbh_ehci_resource[] __initdata = {
-+ {
-+ .start = 0xff300000,
-+ .end = 0xff300400,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(7),
-+};
-+
-+static void __init usbh_setup_pins(void)
-+{
-+ static bool already_done __initdata;
-+
-+ if (!already_done) {
-+ already_done = true;
-+ /* OC_EN_N | OC_FLAG_N */
-+ select_peripheral(PA, (1 << 18) | (1 << 19), PERIPH_D, 0);
-+ }
-+}
-+
-+struct platform_device *__init at32_add_device_ohci(unsigned int id)
-+{
-+ struct platform_device *pdev;
-+
-+ if (id != 0)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("ohci", id);
-+ if (!pdev)
-+ goto error;
-+
-+ if (platform_device_add_resources(pdev, usbh_ohci_resource,
-+ ARRAY_SIZE(usbh_ohci_resource)))
-+ goto error;
-+
-+ pdev->dev.dma_mask = &usbh_dma_mask;
-+ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
-+
-+ clk_set_parent(&pll2, &osc2);
-+ if (clk_round_rate(&pll2, 48000000) != 48000000) {
-+ pr_debug("USBH OHCI: Cannot generate 48 MHz clock\n");
-+ goto error;
-+ }
-+ clk_set_rate(&pll2, 48000000);
-+
-+ clk_set_parent(&gclk0, &pll2);
-+ clk_set_rate(&gclk0, 48000000);
-+
-+ ohci_utmi_clk.dev = &pdev->dev;
-+ ohci_hclk.dev = &pdev->dev;
-+ ohci_gclk.dev = &pdev->dev;
-+
-+ usbh_setup_pins();
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+error:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+struct platform_device *__init at32_add_device_ehci(unsigned int id)
-+{
-+ struct platform_device *pdev;
-+
-+ if (id != 0)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("ehci", id);
-+ if (!pdev)
-+ goto error;
-+
-+ if (platform_device_add_resources(pdev, usbh_ehci_resource,
-+ ARRAY_SIZE(usbh_ehci_resource)))
-+ goto error;
-+
-+ pdev->dev.dma_mask = &usbh_dma_mask;
-+ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
-+
-+ ehci_utmi_clk.dev = &pdev->dev;
-+ ehci_hclk.dev = &pdev->dev;
-+
-+ usbh_setup_pins();
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+error:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* -------------------------------------------------------------------
-+ * NAND Flash / SmartMedia
-+ * ------------------------------------------------------------------- */
-+static struct resource smc_cs3_resource[] __initdata = {
-+ {
-+ .start = 0x24000000,
-+ .end = 0x27ffffff,
-+ .flags = IORESOURCE_MEM,
-+ }, {
-+ .start = 0xffe04c00,
-+ .end = 0xffe04fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+struct platform_device *__init
-+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
-+{
-+ struct platform_device *pdev;
-+
-+ if (id != 0 || !data)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("atmel_nand", id);
-+ if (!pdev)
-+ goto error;
-+
-+ if (platform_device_add_resources(pdev, smc_cs3_resource,
-+ ARRAY_SIZE(smc_cs3_resource)))
-+ goto error;
-+
-+ if (platform_device_add_data(pdev, data,
-+ sizeof(struct atmel_nand_data)))
-+ goto error;
-+
-+ hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_NAND_ENABLE);
-+
-+ /* NANDOE | NANDWE */
-+ select_peripheral(PF, (1 << 0) | (1 << 1), PERIPH_A, 0);
-+
-+ if (gpio_is_valid(data->enable_pin))
-+ at32_select_gpio(data->enable_pin,
-+ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-+ if (gpio_is_valid(data->det_pin))
-+ at32_select_gpio(data->det_pin, 0);
-+ if (gpio_is_valid(data->rdy_pin))
-+ at32_select_gpio(data->rdy_pin, 0);
-+
-+ platform_device_add(pdev);
-+ return pdev;
-+
-+error:
-+ platform_device_put(pdev);
-+ return NULL;
-+}
-+
-+/* -------------------------------------------------------------------
-+ * Clock list
-+ * ------------------------------------------------------------------- */
-+static __initdata struct clk *init_clocks[] = {
-+ &rcosc,
-+ &osc0,
-+ &osc1,
-+ &osc2,
-+ &osc32,
-+ &pll0,
-+ &pll1,
-+ &pll2,
-+ &cpu_clk,
-+ &hsb_clk,
-+ &pba_clk,
-+ &pbb_clk,
-+ &pbc_clk,
-+ &gclk0,
-+ &gclk1,
-+ &gclk2,
-+ &gclk3,
-+ &gclk4,
-+ &gclk5,
-+ &at32_intc0_pclk,
-+ &pm_pclk,
-+ &sdc_pclk,
-+ &ast0_pclk,
-+ &ast1_pclk,
-+ &wdt_pclk,
-+ &gpio_pclk,
-+ &pdca_hclk,
-+ &pdca_pclk,
-+ &ebi_hclk,
-+ &hramc_clk,
-+ &smc_pclk,
-+ &sdramc_clk,
-+ &dw_dmac0_hclk,
-+ &atmel_usart0_usart,
-+ &atmel_usart1_usart,
-+ &atmel_usart2_usart,
-+ &atmel_usart3_usart,
-+ &atmel_usart4_usart,
-+ &atmel_usart5_usart,
-+ &atmel_spi_clk[0],
-+ &atmel_spi_clk[1],
-+ &atmel_spi_clk[2],
-+ &atmel_spi_clk[3],
-+ &macb0_hclk,
-+ &macb0_pclk,
-+ &atmel_mci0_pclk,
-+ &atmel_lcdfb0_hck1,
-+ &atmel_lcdfb0_pixclk,
-+ &atmel_mpopfb0_hclk,
-+ &atmel_mpopfb0_pclk,
-+ &usbh_utmi_clk,
-+ &usbh_hclk,
-+ &ohci_utmi_clk,
-+ &ohci_hclk,
-+ &ohci_gclk,
-+ &ehci_utmi_clk,
-+ &ehci_hclk,
-+};
-+
-+static void pll_init_parent(struct clk *pll)
-+{
-+ u32 ctrl;
-+
-+ ctrl = pm_readl(PLL[pll->index]);
-+ switch (PM_BFEXT(PLLx_PLLOSC, ctrl)) {
-+ case 0:
-+ pll->parent = &osc0;
-+ break;
-+ case 1:
-+ pll->parent = &osc1;
-+ break;
-+ case 2:
-+ pll->parent = &osc2;
-+ break;
-+ }
-+}
-+
-+static void ap7200_power_off(void)
-+{
-+ /*
-+ * Clear all wakeup events so that we don't wake up
-+ * immediately after we shut down.
-+ */
-+ sdc_writel(ECR, ~0UL);
-+ sdc_readl(STATUS);
-+ asm volatile("sleep %0; sub pc, -2"
-+ :: "i"(CPU_SLEEP_SHUTDOWN)
-+ : "memory");
-+}
-+
-+void __init setup_platform(void)
-+{
-+ unsigned int i;
-+ u32 cpu_mask;
-+ u32 hsb_mask;
-+ u32 pba_mask;
-+ u32 pbb_mask;
-+
-+ switch (PM_BFEXT(MCCTRL_MCSEL, pm_readl(MCCTRL))) {
-+ case 0:
-+ main_clock = &rcosc;
-+ break;
-+ case 1:
-+ main_clock = &osc0;
-+ break;
-+ case 2:
-+ main_clock = &pll0;
-+ break;
-+ }
-+
-+ cpu_clk.parent = main_clock;
-+
-+ pll_init_parent(&pll0);
-+ pll_init_parent(&pll1);
-+ pll_init_parent(&pll2);
-+
-+ genclk_init_parent(&gclk0);
-+ genclk_init_parent(&gclk1);
-+ genclk_init_parent(&gclk2);
-+ genclk_init_parent(&gclk3);
-+ genclk_init_parent(&gclk4);
-+ genclk_init_parent(&gclk5);
-+ genclk_init_parent(&atmel_lcdfb0_pixclk);
-+
-+ /*
-+ * Turn on all clocks that have at least one user already, and
-+ * turn off everything else. We only do this for module
-+ * clocks, and even though it isn't particularly pretty to
-+ * check the address of the mode function, it should do the
-+ * trick...
-+ */
-+ cpu_mask = 0x10003;
-+ hsb_mask = pba_mask = pbb_mask = 0;
-+
-+ /* Make sure we don't disable the power manager or the SDRAM */
-+ pm_pclk.users = 1;
-+ pm_pclk.parent->users = 1;
-+ ebi_hclk.users = 1;
-+
-+ /* Can't recursively call clk_enable() from any of the clk ops */
-+ sdc_pclk.users = 1;
-+
-+ for (i = 0; i < ARRAY_SIZE(init_clocks); i++) {
-+ struct clk *clk = init_clocks[i];
-+
-+ /* first, register clock */
-+ at32_clk_register(clk);
-+
-+ if (clk->users == 0)
-+ continue;
-+
-+ if (clk->mode == &cpu_clk_mode)
-+ cpu_mask |= 1 << clk->index;
-+ else if (clk->mode == &hsb_clk_mode)
-+ hsb_mask |= 1 << clk->index;
-+ else if (clk->mode == &pba_clk_mode)
-+ pba_mask |= 1 << clk->index;
-+ else if (clk->mode == &pbb_clk_mode)
-+ pbb_mask |= 1 << clk->index;
-+ }
-+
-+ pm_writel(CPUMASK, cpu_mask);
-+ pm_writel(HSBMASK, hsb_mask);
-+ pm_writel(PBAMASK, pba_mask);
-+ pm_writel(PBBMASK, pbb_mask);
-+
-+ at32_gpio_init(&gpio_device);
-+
-+ /* Enter shutdown mode when powering off. This happens very
-+ * early, so board code may still override this. */
-+ pm_power_off = ap7200_power_off;
-+
-+ /* Enable WAKE pin */
-+ sdc_writel(CTRL, SDC_BIT(CTRL_PIN_EN) | SDC_BIT(CTRL_AST_EN)
-+ | SDC_BIT(CTRL_OCD_EN) | SDC_BIT(CTRL_JTAG_EN)
-+ | SDC_BF(CTRL_KEY, 0x55));
-+ sdc_writel(CTRL, SDC_BIT(CTRL_PIN_EN) | SDC_BIT(CTRL_AST_EN)
-+ | SDC_BIT(CTRL_OCD_EN) | SDC_BIT(CTRL_JTAG_EN)
-+ | SDC_BF(CTRL_KEY, 0xaa));
-+}
-+
-+void __init platform_time_init(void)
-+{
-+ ast_time_init(&ast1_device, AST_CLOCK_PB);
-+}
-+
-+unsigned long at32_get_reset_cause(void)
-+{
-+ return pm_readl(RCAUSE);
-+}
-+
-+struct gen_pool *sram_pool;
-+
-+static int __init sram_init(void)
-+{
-+ struct gen_pool *pool;
-+
-+ /* 1KiB granularity */
-+ pool = gen_pool_create(10, -1);
-+ if (!pool)
-+ goto fail;
-+
-+ if (gen_pool_add(pool, 0x08000000, 0x10000, -1))
-+ goto err_pool_add;
-+
-+ sram_pool = pool;
-+ return 0;
-+
-+err_pool_add:
-+ gen_pool_destroy(pool);
-+fail:
-+ pr_err("Failed to create SRAM pool\n");
-+ return -ENOMEM;
-+}
-+core_initcall(sram_init);
-diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
-index 6c27dda..05877d6 100644
---- a/arch/avr32/mach-at32ap/clock.c
-+++ b/arch/avr32/mach-at32ap/clock.c
-@@ -15,24 +15,40 @@
- #include <linux/err.h>
- #include <linux/device.h>
- #include <linux/string.h>
-+#include <linux/list.h>
-
- #include <mach/chip.h>
-
- #include "clock.h"
-
-+/* at32 clock list */
-+static LIST_HEAD(at32_clock_list);
-+
- static DEFINE_SPINLOCK(clk_lock);
-+static DEFINE_SPINLOCK(clk_list_lock);
-+
-+void at32_clk_register(struct clk *clk)
-+{
-+ spin_lock(&clk_list_lock);
-+ /* add the new item to the end of the list */
-+ list_add_tail(&clk->list, &at32_clock_list);
-+ spin_unlock(&clk_list_lock);
-+}
-
- struct clk *clk_get(struct device *dev, const char *id)
- {
-- int i;
-+ struct clk *clk;
-
-- for (i = 0; i < at32_nr_clocks; i++) {
-- struct clk *clk = at32_clock_list[i];
-+ spin_lock(&clk_list_lock);
-
-- if (clk->dev == dev && strcmp(id, clk->name) == 0)
-+ list_for_each_entry(clk, &at32_clock_list, list) {
-+ if (clk->dev == dev && strcmp(id, clk->name) == 0) {
-+ spin_unlock(&clk_list_lock);
- return clk;
-+ }
- }
-
-+ spin_unlock(&clk_list_lock);
- return ERR_PTR(-ENOENT);
- }
- EXPORT_SYMBOL(clk_get);
-@@ -162,7 +178,11 @@ EXPORT_SYMBOL(clk_get_parent);
- #include <linux/io.h>
- #include <linux/debugfs.h>
- #include <linux/seq_file.h>
--#include "pm.h"
-+#if defined(CONFIG_CPU_AT32AP700X)
-+# include "pm-v1.h"
-+#elif defined(CONFIG_CPU_AT32AP720X)
-+# include "pm-v3.h"
-+#endif
-
-
- #define NEST_DELTA 2
-@@ -203,8 +223,8 @@ dump_clock(struct clk *parent, struct clkinf *r)
-
- /* cost of this scan is small, but not linear... */
- r->nest = nest + NEST_DELTA;
-- for (i = 3; i < at32_nr_clocks; i++) {
-- clk = at32_clock_list[i];
-+
-+ list_for_each_entry(clk, &at32_clock_list, list) {
- if (clk->parent == parent)
- dump_clock(clk, r);
- }
-@@ -215,33 +235,76 @@ static int clk_show(struct seq_file *s, void *unused)
- {
- struct clkinf r;
- int i;
-+ struct clk *clk;
-
- /* show all the power manager registers */
-- seq_printf(s, "MCCTRL = %8x\n", pm_readl(MCCTRL));
-- seq_printf(s, "CKSEL = %8x\n", pm_readl(CKSEL));
-- seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPU_MASK));
-- seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSB_MASK));
-- seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBA_MASK));
-- seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBB_MASK));
-- seq_printf(s, "PLL0 = %8x\n", pm_readl(PLL0));
-- seq_printf(s, "PLL1 = %8x\n", pm_readl(PLL1));
-- seq_printf(s, "IMR = %8x\n", pm_readl(IMR));
-+ seq_printf(s, "MCCTRL = %8x\n", pm_readl(MCCTRL));
-+ seq_printf(s, "CKSEL = %8x\n", pm_readl(CKSEL));
-+#ifdef CONFIG_CPU_AT32AP700X
-+ seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPU_MASK));
-+ seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSB_MASK));
-+ seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBA_MASK));
-+ seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBB_MASK));
-+ seq_printf(s, "PLL0 = %8x\n", pm_readl(PLL0));
-+ seq_printf(s, "PLL1 = %8x\n", pm_readl(PLL1));
-+#else
-+ seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPUMASK));
-+ seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSBMASK));
-+ seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBAMASK));
-+ seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBBMASK));
-+ seq_printf(s, "PBADIVMASK = %8x\n", pm_readl(PBADIVMASK));
-+ seq_printf(s, "PBBDIVMASK = %8x\n", pm_readl(PBBDIVMASK));
-+ seq_printf(s, "PLL0 = %8x\n", pm_readl(PLL[0]));
-+ seq_printf(s, "PLL1 = %8x\n", pm_readl(PLL[1]));
-+ seq_printf(s, "PLL2 = %8x\n", pm_readl(PLL[2]));
-+ seq_printf(s, "OSCCTRL0 = %8x\n", pm_readl(OSCCTRL[0]));
-+ seq_printf(s, "OSCCTRL1 = %8x\n", pm_readl(OSCCTRL[1]));
-+ seq_printf(s, "OSCCTRL2 = %8x\n", pm_readl(OSCCTRL[2]));
-+ seq_printf(s, "POSCSR = %8x\n", pm_readl(POSCSR));
-+ seq_printf(s, "PPCR = %8x\n", pm_readl(PPCR));
-+#endif
-+ seq_printf(s, "IMR = %8x\n", pm_readl(IMR));
- for (i = 0; i < 8; i++) {
- if (i == 5)
- continue;
-- seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL(i)));
-+#ifdef CONFIG_CPU_AT32AP700X
-+ seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL(i)));
-+#else
-+ seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL[i]));
-+#endif
- }
-
- seq_printf(s, "\n");
-
-- /* show clock tree as derived from the three oscillators
-- * we "know" are at the head of the list
-- */
- r.s = s;
- r.nest = 0;
-- dump_clock(at32_clock_list[0], &r);
-- dump_clock(at32_clock_list[1], &r);
-- dump_clock(at32_clock_list[2], &r);
-+ /* protected from changes on the list while dumping */
-+ spin_lock(&clk_list_lock);
-+
-+ /* show clock tree as derived from the three oscillators */
-+ clk = clk_get(NULL, "osc32k");
-+ dump_clock(clk, &r);
-+ clk_put(clk);
-+
-+ clk = clk_get(NULL, "osc0");
-+ dump_clock(clk, &r);
-+ clk_put(clk);
-+
-+ clk = clk_get(NULL, "osc1");
-+ dump_clock(clk, &r);
-+ clk_put(clk);
-+
-+#ifdef CONFIG_CPU_AT32AP720X
-+ clk = clk_get(NULL, "osc2");
-+ dump_clock(clk, &r);
-+ clk_put(clk);
-+
-+ clk = clk_get(NULL, "rcosc");
-+ dump_clock(clk, &r);
-+ clk_put(clk);
-+#endif
-+
-+ spin_unlock(&clk_list_lock);
-
- return 0;
- }
-diff --git a/arch/avr32/mach-at32ap/clock.h b/arch/avr32/mach-at32ap/clock.h
-index bb8e1f2..623bf0e 100644
---- a/arch/avr32/mach-at32ap/clock.h
-+++ b/arch/avr32/mach-at32ap/clock.h
-@@ -12,8 +12,13 @@
- * published by the Free Software Foundation.
- */
- #include <linux/clk.h>
-+#include <linux/list.h>
-+
-+
-+void at32_clk_register(struct clk *clk);
-
- struct clk {
-+ struct list_head list; /* linking element */
- const char *name; /* Clock name/function */
- struct device *dev; /* Device the clock is used by */
- struct clk *parent; /* Parent clock, if any */
-@@ -25,6 +30,3 @@ struct clk {
- u16 users; /* Enabled if non-zero */
- u16 index; /* Sibling index */
- };
--
--extern struct clk *at32_clock_list[];
--extern unsigned int at32_nr_clocks;
-diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/arch/avr32/mach-at32ap/cpufreq.c
-index 5dd8d25..4cabc76 100644
---- a/arch/avr32/mach-at32ap/cpufreq.c
-+++ b/arch/avr32/mach-at32ap/cpufreq.c
-@@ -40,6 +40,9 @@ static unsigned int at32_get_speed(unsigned int cpu)
- return (unsigned int)((clk_get_rate(cpuclk) + 500) / 1000);
- }
-
-+static unsigned int ref_freq;
-+static unsigned long loops_per_jiffy_ref;
-+
- static int at32_set_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-@@ -61,8 +64,19 @@ static int at32_set_target(struct cpufreq_policy *policy,
- freqs.cpu = 0;
- freqs.flags = 0;
-
-+ if (!ref_freq) {
-+ ref_freq = freqs.old;
-+ loops_per_jiffy_ref = boot_cpu_data.loops_per_jiffy;
-+ }
-+
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-+ if (freqs.old < freqs.new)
-+ boot_cpu_data.loops_per_jiffy = cpufreq_scale(
-+ loops_per_jiffy_ref, ref_freq, freqs.new);
- clk_set_rate(cpuclk, freq);
-+ if (freqs.new < freqs.old)
-+ boot_cpu_data.loops_per_jiffy = cpufreq_scale(
-+ loops_per_jiffy_ref, ref_freq, freqs.new);
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
- pr_debug("cpufreq: set frequency %lu Hz\n", freq);
-diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c
-index c36a6d5..b6870b5 100644
---- a/arch/avr32/mach-at32ap/extint.c
-+++ b/arch/avr32/mach-at32ap/extint.c
-@@ -17,6 +17,8 @@
-
- #include <asm/io.h>
-
-+#include <mach/cpu.h>
-+
- /* EIC register offsets */
- #define EIC_IER 0x0000
- #define EIC_IDR 0x0004
-@@ -26,24 +28,18 @@
- #define EIC_MODE 0x0014
- #define EIC_EDGE 0x0018
- #define EIC_LEVEL 0x001c
-+
-+/* This is only valid on v1 (AP700x) */
- #define EIC_NMIC 0x0024
-+# define EIC_NMIC_ENABLE (1 << 0)
-
--/* Bitfields in NMIC */
--#define EIC_NMIC_ENABLE (1 << 0)
--
--/* Bit manipulation macros */
--#define EIC_BIT(name) \
-- (1 << EIC_##name##_OFFSET)
--#define EIC_BF(name,value) \
-- (((value) & ((1 << EIC_##name##_SIZE) - 1)) \
-- << EIC_##name##_OFFSET)
--#define EIC_BFEXT(name,value) \
-- (((value) >> EIC_##name##_OFFSET) \
-- & ((1 << EIC_##name##_SIZE) - 1))
--#define EIC_BFINS(name,value,old) \
-- (((old) & ~(((1 << EIC_##name##_SIZE) - 1) \
-- << EIC_##name##_OFFSET)) \
-- | EIC_BF(name,value))
-+/* These are only valid on v3 (AP720x) */
-+#define EIC_FILTER 0x0020
-+#define EIC_TEST 0x0024
-+#define EIC_ASYNC 0x0028
-+#define EIC_EN 0x0030
-+#define EIC_DIS 0x0034
-+#define EIC_CTRL 0x0038
-
- /* Register access macros */
- #define eic_readl(port,reg) \
-@@ -60,36 +56,68 @@ struct eic {
- static struct eic *nmi_eic;
- static bool nmi_enabled;
-
-+static inline int eic_version(struct eic *eic)
-+{
-+ if (cpu_is_at32ap7000())
-+ return 1;
-+ if (cpu_is_at32ap7200())
-+ return 3;
-+
-+ BUG();
-+}
-+
-+static inline int eic_irq_bitmask(struct eic *eic, unsigned int irq)
-+{
-+ irq -= eic->first_irq;
-+
-+ if (eic_version(eic) > 2)
-+ irq++;
-+ return 1 << irq;
-+}
-+
- static void eic_ack_irq(unsigned int irq)
- {
- struct eic *eic = get_irq_chip_data(irq);
-- eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
-+ eic_writel(eic, ICR, eic_irq_bitmask(eic, irq));
- }
-
- static void eic_mask_irq(unsigned int irq)
- {
- struct eic *eic = get_irq_chip_data(irq);
-- eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
-+ eic_writel(eic, IDR, eic_irq_bitmask(eic, irq));
- }
-
- static void eic_mask_ack_irq(unsigned int irq)
- {
- struct eic *eic = get_irq_chip_data(irq);
-- eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
-- eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
-+ eic_writel(eic, ICR, eic_irq_bitmask(eic, irq));
-+ eic_writel(eic, IDR, eic_irq_bitmask(eic, irq));
- }
-
- static void eic_unmask_irq(unsigned int irq)
- {
- struct eic *eic = get_irq_chip_data(irq);
-- eic_writel(eic, IER, 1 << (irq - eic->first_irq));
-+ eic_writel(eic, IER, eic_irq_bitmask(eic, irq));
-+}
-+
-+/* The following two hooks are only used on v2+ controllers */
-+static void eic_enable_irq(unsigned int irq)
-+{
-+ struct eic *eic = get_irq_chip_data(irq);
-+ eic_writel(eic, EN, eic_irq_bitmask(eic, irq));
-+}
-+
-+static void eic_disable_irq(unsigned int irq)
-+{
-+ struct eic *eic = get_irq_chip_data(irq);
-+ eic_writel(eic, DIS, eic_irq_bitmask(eic, irq));
- }
-
- static int eic_set_irq_type(unsigned int irq, unsigned int flow_type)
- {
- struct eic *eic = get_irq_chip_data(irq);
- struct irq_desc *desc;
-- unsigned int i = irq - eic->first_irq;
-+ unsigned int irq_bitmask = eic_irq_bitmask(eic, irq);
- u32 mode, edge, level;
- int ret = 0;
-
-@@ -105,20 +133,20 @@ static int eic_set_irq_type(unsigned int irq, unsigned int flow_type)
-
- switch (flow_type) {
- case IRQ_TYPE_LEVEL_LOW:
-- mode |= 1 << i;
-- level &= ~(1 << i);
-+ mode |= irq_bitmask;
-+ level &= ~irq_bitmask;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
-- mode |= 1 << i;
-- level |= 1 << i;
-+ mode |= irq_bitmask;
-+ level |= irq_bitmask;
- break;
- case IRQ_TYPE_EDGE_RISING:
-- mode &= ~(1 << i);
-- edge |= 1 << i;
-+ mode &= ~irq_bitmask;
-+ edge |= irq_bitmask;
- break;
- case IRQ_TYPE_EDGE_FALLING:
-- mode &= ~(1 << i);
-- edge &= ~(1 << i);
-+ mode &= ~irq_bitmask;
-+ edge &= ~irq_bitmask;
- break;
- default:
- ret = -EINVAL;
-@@ -160,6 +188,11 @@ static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
- status = eic_readl(eic, ISR);
- pending = status & eic_readl(eic, IMR);
-
-+ if (eic_version(eic) > 1) {
-+ status >>= 1;
-+ pending >>= 1;
-+ }
-+
- while (pending) {
- i = fls(pending) - 1;
- pending &= ~(1 << i);
-@@ -172,16 +205,34 @@ int nmi_enable(void)
- {
- nmi_enabled = true;
-
-- if (nmi_eic)
-- eic_writel(nmi_eic, NMIC, EIC_NMIC_ENABLE);
-+ if (nmi_eic) {
-+ if (eic_version(nmi_eic) > 2) {
-+ eic_writel(nmi_eic, EN, 1 << 0);
-+ eic_writel(nmi_eic, IER, 1 << 0);
-+ } else if (eic_version(nmi_eic) > 1) {
-+ eic_writel(nmi_eic, EN, 1 << 8);
-+ eic_writel(nmi_eic, IER, 1 << 8);
-+ } else {
-+ eic_writel(nmi_eic, NMIC, EIC_NMIC_ENABLE);
-+ }
-+ }
-
- return 0;
- }
-
- void nmi_disable(void)
- {
-- if (nmi_eic)
-- eic_writel(nmi_eic, NMIC, 0);
-+ if (nmi_eic) {
-+ if (eic_version(nmi_eic) > 2) {
-+ eic_writel(nmi_eic, IDR, 1 << 0);
-+ eic_writel(nmi_eic, DIS, 1 << 0);
-+ } else if (eic_version(nmi_eic) > 1) {
-+ eic_writel(nmi_eic, IDR, 1 << 8);
-+ eic_writel(nmi_eic, DIS, 1 << 8);
-+ } else {
-+ eic_writel(nmi_eic, NMIC, 0);
-+ }
-+ }
-
- nmi_enabled = false;
- }
-@@ -230,6 +281,15 @@ static int __init eic_probe(struct platform_device *pdev)
- eic_writel(eic, EDGE, 0UL);
- eic_writel(eic, LEVEL, 0UL);
-
-+ /*
-+ * v2+ controllers have an extra enable/disable/mask set of
-+ * registers.
-+ */
-+ if (eic_version(eic) >= 2) {
-+ eic_chip.enable = eic_enable_irq;
-+ eic_chip.disable = eic_disable_irq;
-+ }
-+
- eic->chip = &eic_chip;
-
- for (i = 0; i < nr_irqs; i++) {
-diff --git a/arch/avr32/mach-at32ap/gpio-v2.c b/arch/avr32/mach-at32ap/gpio-v2.c
-new file mode 100644
-index 0000000..63b8943
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/gpio-v2.c
-@@ -0,0 +1,534 @@
-+/*
-+ * Atmel GPIO Port Multiplexer support
-+ *
-+ * Copyright (C) 2004-2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/debugfs.h>
-+#include <linux/fs.h>
-+#include <linux/gpio.h>
-+#include <linux/io.h>
-+#include <linux/irq.h>
-+#include <linux/platform_device.h>
-+
-+#include <mach/portmux.h>
-+#include <mach/chip.h>
-+
-+#include "gpio-v2.h"
-+
-+/*
-+ * One chip corresponds with one bank of I/O registers. They're really
-+ * all on the same controller.
-+ */
-+struct atmel_gpio_chip {
-+ void __iomem *regs;
-+ u32 pinmux_mask;
-+ struct gpio_chip chip;
-+ char name[8];
-+ unsigned int bank;
-+ int irq;
-+};
-+
-+/* ...which means we only have one clock and one platform device */
-+static struct clk *gpio_clk;
-+static struct atmel_gpio_chip gpio_dev[NR_GPIO_BANKS];
-+
-+/* Pin multiplexing API */
-+static DEFINE_SPINLOCK(gpio_lock);
-+
-+static struct atmel_gpio_chip *to_atmel_gpio_chip(struct gpio_chip *chip)
-+{
-+ return container_of(chip, struct atmel_gpio_chip, chip);
-+}
-+
-+static struct atmel_gpio_chip *pin_to_chip(unsigned int gpio)
-+{
-+ struct atmel_gpio_chip *chip;
-+ unsigned int index;
-+
-+ index = gpio >> 5;
-+ if (index >= NR_GPIO_BANKS)
-+ return NULL;
-+ chip = &gpio_dev[index];
-+ if (!chip->regs)
-+ return NULL;
-+
-+ return chip;
-+}
-+
-+/* Pin multiplexing API */
-+
-+void __init at32_select_periph(unsigned int port, u32 pin_mask,
-+ unsigned int periph, unsigned long flags)
-+{
-+ struct atmel_gpio_chip *chip;
-+
-+ chip = pin_to_chip(port);
-+ if (unlikely(!chip)) {
-+ printk("GPIO: invalid port %u\n", port);
-+ goto fail;
-+ }
-+
-+ /* Test if any of the requested pins is already muxed */
-+ spin_lock(&gpio_lock);
-+ if (unlikely(gpiochip_is_requested(&chip->chip, port)
-+ || unlikely(pin_mask & chip->pinmux_mask))) {
-+ printk(KERN_WARNING "%s: pin(s) busy (requested 0x%x, busy 0x%x)\n",
-+ chip->name, pin_mask, chip->pinmux_mask & pin_mask);
-+ spin_unlock(&gpio_lock);
-+ goto fail;
-+ }
-+
-+ switch (periph) {
-+ case GPIO_PERIPH_A:
-+ gpio_writel(chip, PMR0C, pin_mask);
-+ gpio_writel(chip, PMR1C, pin_mask);
-+ break;
-+ case GPIO_PERIPH_B:
-+ gpio_writel(chip, PMR0S, pin_mask);
-+ gpio_writel(chip, PMR1C, pin_mask);
-+ break;
-+ case GPIO_PERIPH_C:
-+ gpio_writel(chip, PMR0C, pin_mask);
-+ gpio_writel(chip, PMR1S, pin_mask);
-+ break;
-+ case GPIO_PERIPH_D:
-+ gpio_writel(chip, PMR0S, pin_mask);
-+ gpio_writel(chip, PMR1S, pin_mask);
-+ break;
-+ default:
-+ printk("%s: unknown function for pin mask %u\n",
-+ chip->name, pin_mask);
-+ goto fail;
-+ }
-+
-+ gpio_writel(chip, PUERS, pin_mask);
-+
-+ gpio_writel(chip, GPERC, pin_mask);
-+ if (!(flags & AT32_GPIOF_PULLUP))
-+ gpio_writel(chip, PUERC, pin_mask);
-+
-+ spin_unlock(&gpio_lock);
-+
-+ return;
-+
-+fail:
-+ dump_stack();
-+}
-+
-+void __init at32_select_gpio(unsigned int pin, unsigned long flags)
-+{
-+ struct atmel_gpio_chip *chip;
-+ unsigned int pin_index = pin & 0x1f;
-+ u32 mask = 1 << pin_index;
-+
-+ chip = pin_to_chip(pin);
-+ if (unlikely(!chip)) {
-+ printk("GPIO: invalid pin %u\n", pin);
-+ goto fail;
-+ }
-+
-+ if (unlikely(test_and_set_bit(pin_index, &chip->pinmux_mask))) {
-+ printk("%s: pin %u is busy\n", chip->name, pin_index);
-+ goto fail;
-+ }
-+
-+ if (flags & AT32_GPIOF_PULLUP)
-+ gpio_writel(chip, PUERS, mask);
-+ else
-+ gpio_writel(chip, PUERC, mask);
-+ if (flags & AT32_GPIOF_MULTIDRV)
-+ gpio_writel(chip, ODMERS, mask);
-+ else
-+ gpio_writel(chip, ODMERC, mask);
-+ if (flags & AT32_GPIOF_DEGLITCH)
-+ gpio_writel(chip, GFERS, mask);
-+ else
-+ gpio_writel(chip, GFERC, mask);
-+
-+ if (flags & AT32_GPIOF_OUTPUT) {
-+ if (flags & AT32_GPIOF_HIGH)
-+ gpio_writel(chip, OVRS, mask);
-+ else
-+ gpio_writel(chip, OVRC, mask);
-+ gpio_writel(chip, ODERS, mask);
-+ } else {
-+ gpio_writel(chip, ODERC, mask);
-+ }
-+
-+ gpio_writel(chip, GPERS, mask);
-+
-+ return;
-+
-+fail:
-+ dump_stack();
-+}
-+
-+/* Reserve a pin, preventing anyone else from changing its configuration. */
-+void __init at32_reserve_pin(unsigned int port, u32 pin_mask)
-+{
-+ struct atmel_gpio_chip *chip;
-+
-+ chip = pin_to_chip(port);
-+ if (unlikely(!chip)) {
-+ printk("GPIO: invalid port %u\n", port);
-+ goto fail;
-+ }
-+
-+ /* Test if any of the requested pins is already muxed */
-+ spin_lock(&gpio_lock);
-+ if (unlikely(pin_mask & chip->pinmux_mask)) {
-+ printk(KERN_WARNING "%s: pin(s) busy (req. 0x%x, busy 0x%x)\n",
-+ chip->name, pin_mask, chip->pinmux_mask & pin_mask);
-+ spin_unlock(&gpio_lock);
-+ goto fail;
-+ }
-+
-+ /* Reserve pins */
-+ chip->pinmux_mask |= pin_mask;
-+ spin_unlock(&gpio_lock);
-+ return;
-+
-+fail:
-+ dump_stack();
-+}
-+
-+/*--------------------------------------------------------------------------*/
-+
-+/* GPIO API */
-+
-+static int get_pin_state(struct gpio_chip *chip, unsigned int offset)
-+{
-+ struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip);
-+
-+ return (gpio_readl(gpio, PVR) >> offset) & 1;
-+}
-+
-+static void set_pin_state(struct gpio_chip *chip, unsigned int offset, int high)
-+{
-+ struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip);
-+ u32 mask = 1 << offset;
-+
-+ if (high)
-+ gpio_writel(gpio, OVRS, mask);
-+ else
-+ gpio_writel(gpio, OVRC, mask);
-+}
-+
-+static int direction_input(struct gpio_chip *chip, unsigned int offset)
-+{
-+ struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip);
-+ u32 mask = 1 << offset;
-+
-+ if (!(gpio_readl(gpio, GPER) & mask))
-+ return -EINVAL;
-+
-+ gpio_writel(gpio, ODERC, mask);
-+ return 0;
-+}
-+
-+static int direction_output(struct gpio_chip *chip, unsigned int offset,
-+ int high)
-+{
-+ struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip);
-+ u32 mask = 1 << offset;
-+
-+ if (!(gpio_readl(gpio, GPER) & mask))
-+ return -EINVAL;
-+
-+ set_pin_state(chip, offset, high);
-+ gpio_writel(gpio, ODERS, mask);
-+ return 0;
-+}
-+
-+/*--------------------------------------------------------------------------*/
-+
-+/* GPIO IRQ support */
-+
-+static void gpio_irq_mask(unsigned irq)
-+{
-+ unsigned int pin = irq_to_gpio(irq);
-+ struct atmel_gpio_chip *chip = &gpio_dev[pin >> 5];
-+
-+ gpio_writel(chip, IERC, 1 << (pin & 0x1f));
-+}
-+
-+static void gpio_irq_unmask(unsigned irq)
-+{
-+ unsigned int pin = irq_to_gpio(irq);
-+ struct atmel_gpio_chip *chip = &gpio_dev[pin >> 5];
-+
-+ gpio_writel(chip, IERS, 1 << (pin & 0x1f));
-+}
-+
-+static int gpio_irq_type(unsigned irq, unsigned type)
-+{
-+ unsigned int pin = irq_to_gpio(irq);
-+ struct atmel_gpio_chip *chip = &gpio_dev[pin >> 5];
-+ u32 mask = 1 << (pin & 0x1f);
-+
-+ switch (type) {
-+ case IRQ_TYPE_EDGE_FALLING:
-+ gpio_writel(chip, IMR0C, mask);
-+ gpio_writel(chip, IMR1S, mask);
-+ break;
-+ case IRQ_TYPE_EDGE_RISING:
-+ gpio_writel(chip, IMR0S, mask);
-+ gpio_writel(chip, IMR1C, mask);
-+ break;
-+ case IRQ_TYPE_NONE:
-+ /* fall through */
-+ case IRQ_TYPE_EDGE_BOTH:
-+ gpio_writel(chip, IMR0C, mask);
-+ gpio_writel(chip, IMR1C, mask);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static struct irq_chip gpio_irqchip = {
-+ .name = "gpio",
-+ .mask = gpio_irq_mask,
-+ .unmask = gpio_irq_unmask,
-+ .set_type = gpio_irq_type,
-+};
-+
-+static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
-+{
-+ struct atmel_gpio_chip *chip = get_irq_chip_data(irq);
-+ unsigned int gpio_irq;
-+
-+ gpio_irq = (unsigned int) get_irq_data(irq);
-+ for (;;) {
-+ u32 ifr;
-+ struct irq_desc *d;
-+
-+ /* ack pending GPIO interrupts */
-+ ifr = gpio_readl(chip, IFR);
-+ if (!ifr)
-+ break;
-+ do {
-+ int pin;
-+
-+ pin = ffs(ifr) - 1;
-+ ifr &= ~(1 << pin);
-+ gpio_writel(chip, IFRC, (1 << pin));
-+
-+ pin += gpio_irq;
-+ d = &irq_desc[pin];
-+
-+ d->handle_irq(pin, d);
-+ } while (ifr);
-+ }
-+}
-+
-+static void __init
-+gpio_irq_setup(struct atmel_gpio_chip *chip, int irq, int gpio_irq)
-+{
-+ unsigned i;
-+
-+ set_irq_chip_data(irq, chip);
-+ set_irq_data(irq, (void *) gpio_irq);
-+
-+ for (i = 0; i < 32; i++, gpio_irq++) {
-+ set_irq_chip_data(gpio_irq, chip);
-+ set_irq_chip_and_handler(gpio_irq, &gpio_irqchip,
-+ handle_simple_irq);
-+ }
-+
-+ set_irq_chained_handler(irq, gpio_irq_handler);
-+}
-+
-+/*--------------------------------------------------------------------------*/
-+
-+#ifdef CONFIG_DEBUG_FS
-+
-+#include <linux/seq_file.h>
-+
-+/*
-+ * This shows more info than the generic gpio dump code:
-+ * pullups, deglitching, open drain drive.
-+ */
-+static void gpio_bank_show(struct seq_file *s, struct gpio_chip *chip)
-+{
-+ struct atmel_gpio_chip *gpio = to_atmel_gpio_chip(chip);
-+ u32 oder, ovr, puer, pder, gfer, odmer, ier, imr0, imr1;
-+ unsigned int i;
-+ u32 mask;
-+
-+ oder = gpio_readl(gpio, ODER);
-+ ovr = gpio_readl(gpio, OVR);
-+ puer = gpio_readl(gpio, PUER);
-+ pder = gpio_readl(gpio, PDER);
-+ gfer = gpio_readl(gpio, GFER);
-+ odmer = gpio_readl(gpio, ODMER);
-+ ier = gpio_readl(gpio, IER);
-+ imr0 = gpio_readl(gpio, IMR0);
-+ imr1 = gpio_readl(gpio, IMR1);
-+
-+ for (i = 0, mask = 1; i < 32; i++, mask <<= 1) {
-+ const char *label;
-+
-+ label = gpiochip_is_requested(chip, i);
-+ if (!label)
-+ continue;
-+
-+ seq_printf(s, " gpio-%-3d ", chip->base + i);
-+ gpio_decode_pin(s, gpio->bank, i);
-+ seq_printf(s, " (%-12s) %s %s", label,
-+ (oder & mask) ? "out" : "in",
-+ (ovr & mask) ? "hi" : "lo");
-+ if ((puer & mask) && !(pder & mask))
-+ seq_printf(s, " pull-up");
-+ else if (!(puer & mask) && (pder & mask))
-+ seq_printf(s, " pull-down");
-+ else if ((puer & mask) && (pder & mask))
-+ seq_printf(s, " buskeeper");
-+ if (gfer & mask)
-+ seq_printf(s, " deglitch");
-+ if (odmer & mask)
-+ seq_printf(s, " open-drain");
-+ if ((gpio->irq >= 0) && (ier & mask)) {
-+ seq_printf(s, " irq-%d edge-",
-+ gpio_to_irq(chip->base + i));
-+ if (!(imr0 & mask) && !(imr1 & mask))
-+ seq_printf(s, "both");
-+ else if ((imr0 & mask) && !(imr1 & mask))
-+ seq_printf(s, "rising");
-+ else if (!(imr0 & mask) && (imr1 & mask))
-+ seq_printf(s, "falling");
-+ else
-+ seq_printf(s, "INVALID");
-+ }
-+ seq_printf(s, "\n");
-+ }
-+}
-+
-+#else
-+#define gpio_bank_show NULL
-+#endif
-+
-+static int __init gpio_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs;
-+ struct resource *irqs;
-+ int irq = -1;
-+ unsigned int i;
-+
-+ BUG_ON(pdev->id >= 1);
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_err(&pdev->dev, "no mmio resource defined\n");
-+ return -ENXIO;
-+ }
-+ irqs = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+ if (irqs)
-+ irq = irqs->start;
-+
-+ for (i = 0; i < NR_GPIO_BANKS; i++) {
-+ unsigned int gpio_irq_base;
-+ struct atmel_gpio_chip *chip;
-+
-+ chip = &gpio_dev[i];
-+ BUG_ON(!chip->regs);
-+
-+ chip->chip.label = chip->name;
-+ chip->chip.base = i * 32;
-+ chip->chip.ngpio = 32;
-+
-+ chip->chip.direction_input = direction_input;
-+ chip->chip.get = get_pin_state;
-+ chip->chip.direction_output = direction_output;
-+ chip->chip.set = set_pin_state;
-+ chip->chip.dbg_show = gpio_bank_show;
-+
-+ gpiochip_add(&chip->chip);
-+
-+ gpio_irq_base = GPIO_IRQ_BASE + (i * 32);
-+ if (irqs && irq <= irqs->end) {
-+ gpio_irq_setup(chip, irq, gpio_irq_base);
-+ chip->irq = irq;
-+ irq++;
-+ } else {
-+ chip->irq = -1;
-+ }
-+
-+ platform_set_drvdata(pdev, chip);
-+
-+ printk(KERN_DEBUG "%s: base 0x%p", chip->name, chip->regs);
-+ if (chip->irq >= 0)
-+ printk(" irq %d chains %d..%d", irq,
-+ gpio_irq_base, gpio_irq_base + 31);
-+ printk("\n");
-+ }
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gpio_driver = {
-+ .probe = gpio_probe,
-+ .driver = {
-+ .name = "gpio",
-+ },
-+};
-+
-+static int __init gpio_init(void)
-+{
-+ return platform_driver_register(&gpio_driver);
-+}
-+postcore_initcall(gpio_init);
-+
-+void __init at32_gpio_init(struct platform_device *pdev)
-+{
-+ int i;
-+ struct clk *clk;
-+ struct resource *regs;
-+ void __iomem *iomem_base;
-+ struct atmel_gpio_chip *chip;
-+
-+ if (pdev->id > 0) {
-+ dev_err(&pdev->dev, "only one GPIO controller supported\n");
-+ return;
-+ }
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_err(&pdev->dev, "no mmio resource defined\n");
-+ return;
-+ }
-+
-+ clk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(clk)) {
-+ dev_err(&pdev->dev, "no mck clock defined\n");
-+ return;
-+ }
-+ clk_enable(clk);
-+
-+ gpio_clk = clk;
-+
-+ /*
-+ * We may get called too early for ioremap() to work. But we
-+ * know that the GPIO registers are permanently mapped 1:1
-+ */
-+ iomem_base = (void __iomem __force *)regs->start;
-+
-+ for (i = 0; i < NR_GPIO_BANKS; i++) {
-+ chip = &gpio_dev[i];
-+ snprintf(chip->name, sizeof(chip->name), "gpio%d", i);
-+ chip->regs = iomem_base + (i * 0x200);
-+ chip->bank = i;
-+
-+ /* start with irqs disabled and acked */
-+ gpio_writel(chip, IERC, ~0UL);
-+ gpio_writel(chip, IFRC, ~0UL);
-+ }
-+}
-diff --git a/arch/avr32/mach-at32ap/gpio-v2.h b/arch/avr32/mach-at32ap/gpio-v2.h
-new file mode 100644
-index 0000000..77e4105
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/gpio-v2.h
-@@ -0,0 +1,116 @@
-+/*
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#ifndef __GPIO_REGS_H__
-+#define __GPIO_REGS_H__
-+
-+/* Register offsets */
-+struct gpio_regs {
-+ u32 GPER;
-+ u32 GPERS;
-+ u32 GPERC;
-+ u32 GPERT;
-+ u32 PMR0;
-+ u32 PMR0S;
-+ u32 PMR0C;
-+ u32 PMR0T;
-+ u32 PMR1;
-+ u32 PMR1S;
-+ u32 PMR1C;
-+ u32 PMR1T;
-+ u32 __reserved0[4];
-+ u32 ODER;
-+ u32 ODERS;
-+ u32 ODERC;
-+ u32 ODERT;
-+ u32 OVR;
-+ u32 OVRS;
-+ u32 OVRC;
-+ u32 OVRT;
-+ u32 PVR;
-+ u32 __reserved_PVRS;
-+ u32 __reserved_PVRC;
-+ u32 __reserved_PVRT;
-+ u32 PUER;
-+ u32 PUERS;
-+ u32 PUERC;
-+ u32 PUERT;
-+ u32 PDER;
-+ u32 PDERS;
-+ u32 PDERC;
-+ u32 PDERT;
-+ u32 IER;
-+ u32 IERS;
-+ u32 IERC;
-+ u32 IERT;
-+ u32 IMR0;
-+ u32 IMR0S;
-+ u32 IMR0C;
-+ u32 IMR0T;
-+ u32 IMR1;
-+ u32 IMR1S;
-+ u32 IMR1C;
-+ u32 IMR1T;
-+ u32 GFER;
-+ u32 GFERS;
-+ u32 GFERC;
-+ u32 GFERT;
-+ u32 IFR;
-+ u32 __reserved_IFRS;
-+ u32 IFRC;
-+ u32 __reserved_IFRT;
-+ u32 ODMER;
-+ u32 ODMERS;
-+ u32 ODMERC;
-+ u32 ODMERT;
-+ u32 __reserved1[4];
-+ u32 ODCR0;
-+ u32 ODCR0S;
-+ u32 ODCR0C;
-+ u32 ODCR0T;
-+ u32 ODCR1;
-+ u32 ODCR1S;
-+ u32 ODCR1C;
-+ u32 ODCR1T;
-+ u32 __reserved2[4];
-+ u32 OSRR0;
-+ u32 OSRR0S;
-+ u32 OSRR0C;
-+ u32 OSRR0T;
-+ u32 __reserved3[8];
-+ u32 STER;
-+ u32 STERS;
-+ u32 STERC;
-+ u32 STERT;
-+ u32 __reserved4[35];
-+ u32 VERSION;
-+};
-+
-+/* Register access macros */
-+#define __gpio_regs(bank) ((struct gpio_regs __iomem *)(bank)->regs)
-+#define gpio_readl(bank, reg) \
-+ __raw_readl(&__gpio_regs(bank)->reg)
-+#define gpio_writel(bank, reg, value) \
-+ __raw_writel(value, &__gpio_regs(bank)->reg)
-+
-+void at32_gpio_init(struct platform_device *pdev);
-+
-+#endif /* __GPIO_REGS_H__ */
-diff --git a/arch/avr32/mach-at32ap/hmatrix.c b/arch/avr32/mach-at32ap/hmatrix.c
-index 48f5ede..2f55e69 100644
---- a/arch/avr32/mach-at32ap/hmatrix.c
-+++ b/arch/avr32/mach-at32ap/hmatrix.c
-@@ -54,6 +54,81 @@ u32 hmatrix_read_reg(unsigned long offset)
- }
-
- /**
-+ * hmatrix_set_default_master - set default master on a given slave
-+ * @slave: HSB slave interface ID
-+ * @master: HSB master interface ID
-+ */
-+void hmatrix_set_default_master(unsigned int slave, unsigned int master)
-+{
-+ u32 value;
-+ unsigned int reg;
-+
-+ WARN_ON(slave > HMATRIX_MAX_SLAVE
-+ || master > HMATRIX_MASTER_LAST);
-+
-+ reg = HMATRIX_SCFG(slave);
-+
-+ clk_enable(&at32_hmatrix_clk);
-+ value = __hmatrix_read_reg(reg);
-+ value &= ~(HMATRIX_SCFG_FIXED_DEFMSTR(HMATRIX_MAX_SLAVE)
-+ | HMATRIX_SCFG_DEFMSTR_MASK);
-+
-+ switch (master) {
-+ case HMATRIX_MASTER_NONE:
-+ value |= HMATRIX_SCFG_DEFMSTR_NONE;
-+ break;
-+ case HMATRIX_MASTER_LAST:
-+ value |= HMATRIX_SCFG_DEFMSTR_LAST;
-+ break;
-+ default:
-+ value |= HMATRIX_SCFG_DEFMSTR_FIXED;
-+ value |= HMATRIX_SCFG_FIXED_DEFMSTR(master);
-+ break;
-+ }
-+
-+ __hmatrix_write_reg(reg, value);
-+ __hmatrix_read_reg(reg);
-+ clk_disable(&at32_hmatrix_clk);
-+}
-+
-+/**
-+ * hmatrix_set_priority - set the priority of a master on a given slave
-+ * @slave: HSB slave interface ID
-+ * @master: HSB master interface ID
-+ * @priority: Priority of @master when competing for access to @slave.
-+ *
-+ * Note that this is currently broken -- we need some way to enable
-+ * fixed-priority arbitration, and that happens to be broken on AP7000
-+ * rev C.
-+ */
-+void hmatrix_set_priority(unsigned int slave, unsigned int master,
-+ unsigned int priority)
-+{
-+ u32 value;
-+ unsigned int reg;
-+
-+ WARN_ON(slave > HMATRIX_MAX_SLAVE
-+ || master > HMATRIX_MAX_MASTER
-+ || priority > HMATRIX_MAX_PRIO);
-+
-+ clk_enable(&at32_hmatrix_clk);
-+ if (master < 8) {
-+ reg = HMATRIX_PRAS(slave);
-+ value = __hmatrix_read_reg(reg);
-+ value &= ~HMATRIX_PRAS_PRIO(master, HMATRIX_MAX_PRIO);
-+ value |= HMATRIX_PRAS_PRIO(master, priority);
-+ } else {
-+ reg = HMATRIX_PRBS(slave);
-+ value = __hmatrix_read_reg(reg);
-+ value &= ~HMATRIX_PRBS_PRIO(master, HMATRIX_MAX_PRIO);
-+ value |= HMATRIX_PRBS_PRIO(master, priority);
-+ }
-+ __hmatrix_write_reg(reg, value);
-+ __hmatrix_read_reg(reg);
-+ clk_disable(&at32_hmatrix_clk);
-+}
-+
-+/**
- * hmatrix_sfr_set_bits - set bits in a slave's Special Function Register
- * @slave_id: operate on the SFR belonging to this slave
- * @mask: mask of bits to be set in the SFR
-diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
-index 2875c11..3152e0f 100644
---- a/arch/avr32/mach-at32ap/hsmc.c
-+++ b/arch/avr32/mach-at32ap/hsmc.c
-@@ -229,10 +229,8 @@ static int hsmc_probe(struct platform_device *pdev)
- if (IS_ERR(pclk))
- return PTR_ERR(pclk);
- mck = clk_get(&pdev->dev, "mck");
-- if (IS_ERR(mck)) {
-- ret = PTR_ERR(mck);
-- goto out_put_pclk;
-- }
-+ if (IS_ERR(mck))
-+ mck = pclk;
-
- ret = -ENOMEM;
- hsmc = kzalloc(sizeof(struct hsmc), GFP_KERNEL);
-@@ -260,8 +258,8 @@ out_disable_clocks:
- clk_disable(pclk);
- kfree(hsmc);
- out_put_clocks:
-- clk_put(mck);
--out_put_pclk:
-+ if (mck != pclk)
-+ clk_put(mck);
- clk_put(pclk);
- hsmc = NULL;
- return ret;
-diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
-index 1e9852d..5c4c971 100644
---- a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
-+++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
-@@ -83,4 +83,135 @@
- #define HMATRIX_BASE 0xfff00800
- #define SDRAMC_BASE 0xfff03800
-
-+/* LCDC on port C */
-+#define ATMEL_LCDC_PC_CC (1ULL << 19)
-+#define ATMEL_LCDC_PC_HSYNC (1ULL << 20)
-+#define ATMEL_LCDC_PC_PCLK (1ULL << 21)
-+#define ATMEL_LCDC_PC_VSYNC (1ULL << 22)
-+#define ATMEL_LCDC_PC_DVAL (1ULL << 23)
-+#define ATMEL_LCDC_PC_MODE (1ULL << 24)
-+#define ATMEL_LCDC_PC_PWR (1ULL << 25)
-+#define ATMEL_LCDC_PC_DATA0 (1ULL << 26)
-+#define ATMEL_LCDC_PC_DATA1 (1ULL << 27)
-+#define ATMEL_LCDC_PC_DATA2 (1ULL << 28)
-+#define ATMEL_LCDC_PC_DATA3 (1ULL << 29)
-+#define ATMEL_LCDC_PC_DATA4 (1ULL << 30)
-+#define ATMEL_LCDC_PC_DATA5 (1ULL << 31)
-+
-+/* LCDC on port D */
-+#define ATMEL_LCDC_PD_DATA6 (1ULL << 0)
-+#define ATMEL_LCDC_PD_DATA7 (1ULL << 1)
-+#define ATMEL_LCDC_PD_DATA8 (1ULL << 2)
-+#define ATMEL_LCDC_PD_DATA9 (1ULL << 3)
-+#define ATMEL_LCDC_PD_DATA10 (1ULL << 4)
-+#define ATMEL_LCDC_PD_DATA11 (1ULL << 5)
-+#define ATMEL_LCDC_PD_DATA12 (1ULL << 6)
-+#define ATMEL_LCDC_PD_DATA13 (1ULL << 7)
-+#define ATMEL_LCDC_PD_DATA14 (1ULL << 8)
-+#define ATMEL_LCDC_PD_DATA15 (1ULL << 9)
-+#define ATMEL_LCDC_PD_DATA16 (1ULL << 10)
-+#define ATMEL_LCDC_PD_DATA17 (1ULL << 11)
-+#define ATMEL_LCDC_PD_DATA18 (1ULL << 12)
-+#define ATMEL_LCDC_PD_DATA19 (1ULL << 13)
-+#define ATMEL_LCDC_PD_DATA20 (1ULL << 14)
-+#define ATMEL_LCDC_PD_DATA21 (1ULL << 15)
-+#define ATMEL_LCDC_PD_DATA22 (1ULL << 16)
-+#define ATMEL_LCDC_PD_DATA23 (1ULL << 17)
-+
-+/* LCDC on port E */
-+#define ATMEL_LCDC_PE_CC (1ULL << (32 + 0))
-+#define ATMEL_LCDC_PE_DVAL (1ULL << (32 + 1))
-+#define ATMEL_LCDC_PE_MODE (1ULL << (32 + 2))
-+#define ATMEL_LCDC_PE_DATA0 (1ULL << (32 + 3))
-+#define ATMEL_LCDC_PE_DATA1 (1ULL << (32 + 4))
-+#define ATMEL_LCDC_PE_DATA2 (1ULL << (32 + 5))
-+#define ATMEL_LCDC_PE_DATA3 (1ULL << (32 + 6))
-+#define ATMEL_LCDC_PE_DATA4 (1ULL << (32 + 7))
-+#define ATMEL_LCDC_PE_DATA8 (1ULL << (32 + 8))
-+#define ATMEL_LCDC_PE_DATA9 (1ULL << (32 + 9))
-+#define ATMEL_LCDC_PE_DATA10 (1ULL << (32 + 10))
-+#define ATMEL_LCDC_PE_DATA11 (1ULL << (32 + 11))
-+#define ATMEL_LCDC_PE_DATA12 (1ULL << (32 + 12))
-+#define ATMEL_LCDC_PE_DATA16 (1ULL << (32 + 13))
-+#define ATMEL_LCDC_PE_DATA17 (1ULL << (32 + 14))
-+#define ATMEL_LCDC_PE_DATA18 (1ULL << (32 + 15))
-+#define ATMEL_LCDC_PE_DATA19 (1ULL << (32 + 16))
-+#define ATMEL_LCDC_PE_DATA20 (1ULL << (32 + 17))
-+#define ATMEL_LCDC_PE_DATA21 (1ULL << (32 + 18))
-+
-+
-+#define ATMEL_LCDC(PORT, PIN) (ATMEL_LCDC_##PORT##_##PIN)
-+
-+
-+#define ATMEL_LCDC_PRI_24B_DATA ( \
-+ ATMEL_LCDC(PC, DATA0) | ATMEL_LCDC(PC, DATA1) | \
-+ ATMEL_LCDC(PC, DATA2) | ATMEL_LCDC(PC, DATA3) | \
-+ ATMEL_LCDC(PC, DATA4) | ATMEL_LCDC(PC, DATA5) | \
-+ ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \
-+ ATMEL_LCDC(PD, DATA8) | ATMEL_LCDC(PD, DATA9) | \
-+ ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) | \
-+ ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA13) | \
-+ ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \
-+ ATMEL_LCDC(PD, DATA16) | ATMEL_LCDC(PD, DATA17) | \
-+ ATMEL_LCDC(PD, DATA18) | ATMEL_LCDC(PD, DATA19) | \
-+ ATMEL_LCDC(PD, DATA20) | ATMEL_LCDC(PD, DATA21) | \
-+ ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23))
-+
-+#define ATMEL_LCDC_ALT_24B_DATA ( \
-+ ATMEL_LCDC(PE, DATA0) | ATMEL_LCDC(PE, DATA1) | \
-+ ATMEL_LCDC(PE, DATA2) | ATMEL_LCDC(PE, DATA3) | \
-+ ATMEL_LCDC(PE, DATA4) | ATMEL_LCDC(PC, DATA5) | \
-+ ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \
-+ ATMEL_LCDC(PE, DATA8) | ATMEL_LCDC(PE, DATA9) | \
-+ ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) | \
-+ ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PD, DATA13) | \
-+ ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \
-+ ATMEL_LCDC(PE, DATA16) | ATMEL_LCDC(PE, DATA17) | \
-+ ATMEL_LCDC(PE, DATA18) | ATMEL_LCDC(PE, DATA19) | \
-+ ATMEL_LCDC(PE, DATA20) | ATMEL_LCDC(PE, DATA21) | \
-+ ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23))
-+
-+#define ATMEL_LCDC_PRI_15B_DATA ( \
-+ ATMEL_LCDC(PC, DATA0) | ATMEL_LCDC(PC, DATA1) | \
-+ ATMEL_LCDC(PC, DATA2) | ATMEL_LCDC(PC, DATA3) | \
-+ ATMEL_LCDC(PC, DATA4) | ATMEL_LCDC(PC, DATA5) | \
-+ ATMEL_LCDC(PD, DATA8) | ATMEL_LCDC(PD, DATA9) | \
-+ ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) | \
-+ ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA16) | \
-+ ATMEL_LCDC(PD, DATA17) | ATMEL_LCDC(PD, DATA18) | \
-+ ATMEL_LCDC(PD, DATA19) | ATMEL_LCDC(PD, DATA20))
-+
-+#define ATMEL_LCDC_ALT_15B_DATA ( \
-+ ATMEL_LCDC(PE, DATA0) | ATMEL_LCDC(PE, DATA1) | \
-+ ATMEL_LCDC(PE, DATA2) | ATMEL_LCDC(PE, DATA3) | \
-+ ATMEL_LCDC(PE, DATA4) | ATMEL_LCDC(PC, DATA5) | \
-+ ATMEL_LCDC(PE, DATA8) | ATMEL_LCDC(PE, DATA9) | \
-+ ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) | \
-+ ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PE, DATA16) | \
-+ ATMEL_LCDC(PE, DATA17) | ATMEL_LCDC(PE, DATA18) | \
-+ ATMEL_LCDC(PE, DATA19) | ATMEL_LCDC(PE, DATA20))
-+
-+#define ATMEL_LCDC_PRI_CONTROL ( \
-+ ATMEL_LCDC(PC, CC) | ATMEL_LCDC(PC, DVAL) | \
-+ ATMEL_LCDC(PC, MODE) | ATMEL_LCDC(PC, PWR))
-+
-+#define ATMEL_LCDC_ALT_CONTROL ( \
-+ ATMEL_LCDC(PE, CC) | ATMEL_LCDC(PE, DVAL) | \
-+ ATMEL_LCDC(PE, MODE) | ATMEL_LCDC(PC, PWR))
-+
-+#define ATMEL_LCDC_CONTROL ( \
-+ ATMEL_LCDC(PC, HSYNC) | ATMEL_LCDC(PC, VSYNC) | \
-+ ATMEL_LCDC(PC, PCLK))
-+
-+#define ATMEL_LCDC_PRI_24BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_24B_DATA)
-+
-+#define ATMEL_LCDC_ALT_24BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_24B_DATA)
-+
-+#define ATMEL_LCDC_PRI_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_15B_DATA)
-+
-+#define ATMEL_LCDC_ALT_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_15B_DATA)
-+
-+/* Bitmask for all EBI data (D16..D31) pins on port E */
-+#define ATMEL_EBI_PE_DATA_ALL (0x0000FFFF)
-+
- #endif /* __ASM_ARCH_AT32AP700X_H__ */
-diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap720x.h b/arch/avr32/mach-at32ap/include/mach/at32ap720x.h
-new file mode 100644
-index 0000000..5a3082a
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/include/mach/at32ap720x.h
-@@ -0,0 +1,105 @@
-+/*
-+ * Pin definitions for AT32AP7200
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_ARCH_AT32AP7200_H__
-+#define __ASM_ARCH_AT32AP7200_H__
-+
-+#define GPIO_PERIPH_A 0x00
-+#define GPIO_PERIPH_B 0x01
-+#define GPIO_PERIPH_C 0x02
-+#define GPIO_PERIPH_D 0x03
-+
-+#define NR_GPIO_BANKS 8
-+
-+/*
-+ * Pin numbers identifying specific GPIO pins on the chip. They can
-+ * also be converted to IRQ numbers by passing them through
-+ * gpio_to_irq().
-+ */
-+#define GPIO_BASE (0)
-+
-+#define GPIO_PA_BASE (GPIO_BASE + 0 * 32)
-+#define GPIO_PB_BASE (GPIO_BASE + 1 * 32)
-+#define GPIO_PC_BASE (GPIO_BASE + 2 * 32)
-+#define GPIO_PD_BASE (GPIO_BASE + 3 * 32)
-+#define GPIO_PE_BASE (GPIO_BASE + 4 * 32)
-+#define GPIO_PF_BASE (GPIO_BASE + 5 * 32)
-+#define GPIO_PX_BASE (GPIO_BASE + 6 * 32)
-+
-+#define GPIO_PIN_PA(N) (GPIO_PA_BASE + (N))
-+#define GPIO_PIN_PB(N) (GPIO_PB_BASE + (N))
-+#define GPIO_PIN_PC(N) (GPIO_PC_BASE + (N))
-+#define GPIO_PIN_PD(N) (GPIO_PD_BASE + (N))
-+#define GPIO_PIN_PE(N) (GPIO_PE_BASE + (N))
-+#define GPIO_PIN_PF(N) (GPIO_PF_BASE + (N))
-+#define GPIO_PIN_PX(N) (GPIO_PX_BASE + (N))
-+
-+#define gpio_decode_pin(s, bank, offset) \
-+ do { \
-+ switch (bank) { \
-+ case 7: \
-+ offset += 32; \
-+ /* fall through */ \
-+ case 6: \
-+ seq_printf(s, "PX%-2u", offset); \
-+ break; \
-+ default: \
-+ seq_printf(s, "P%c%-2u", bank + 'A', offset); \
-+ break; \
-+ } \
-+ } while (0)
-+
-+/* HSB master IDs */
-+#define HMATRIX_MASTER_CPU_ICACHE 0
-+#define HMATRIX_MASTER_CPU_DCACHE 1
-+#define HMATRIX_MASTER_PDCA 2
-+#define HMATRIX_MASTER_LCDC 4
-+#define HMATRIX_MASTER_MPOP_IBI 5
-+#define HMATRIX_MASTER_MPOP_OBI 6
-+#define HMATRIX_MASTER_MPOP_OM 7
-+#define HMATRIX_MASTER_DMACA_M0 8
-+#define HMATRIX_MASTER_DMACA_M1 9
-+#define HMATRIX_MASTER_USBB 10
-+#define HMATRIX_MASTER_USBH_EHCI 11
-+#define HMATRIX_MASTER_USBH_OHCI 12
-+#define HMATRIX_MASTER_MACB 13
-+
-+/* HSB slave IDs */
-+#define HMATRIX_SLAVE_BOOTROM 0
-+#define HMATRIX_SLAVE_PBA 1
-+#define HMATRIX_SLAVE_PBB 2
-+#define HMATRIX_SLAVE_PBC 3
-+#define HMATRIX_SLAVE_SRAM0 4
-+#define HMATRIX_SLAVE_SRAM1 5
-+#define HMATRIX_SLAVE_EBI 6
-+#define HMATRIX_SLAVE_LCDC 7
-+#define HMATRIX_SLAVE_MPOP 8
-+#define HMATRIX_SLAVE_DMACA 9
-+#define HMATRIX_SLAVE_USBB 10
-+#define HMATRIX_SLAVE_EHCI 11
-+#define HMATRIX_SLAVE_OHCI 12
-+
-+/* Bits in HMATRIX SFR6 (EBI) */
-+#define HMATRIX_EBI_SDRAM_ENABLE (1 << 1)
-+#define HMATRIX_EBI_NAND_ENABLE (1 << 3)
-+#define HMATRIX_EBI_CF0_ENABLE (1 << 4)
-+#define HMATRIX_EBI_CF1_ENABLE (1 << 5)
-+
-+/*
-+ * Base addresses of controllers that may be accessed early by
-+ * platform code.
-+ */
-+#define GPIO_HW_BASE 0xffd02000
-+#define INTC_BASE 0xffd00000
-+#define PM_BASE 0xffd00400
-+#define SDC_BASE 0xffd00800
-+#define SDRAMC_BASE 0xffe04800
-+#define HMATRIX_BASE 0xffe05000
-+
-+#endif /* __ASM_ARCH_AT32AP7200_H__ */
-diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
-index e60e907..85441ff 100644
---- a/arch/avr32/mach-at32ap/include/mach/board.h
-+++ b/arch/avr32/mach-at32ap/include/mach/board.h
-@@ -14,8 +14,14 @@
- */
- extern unsigned long at32_board_osc_rates[];
-
--/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
--void at32_add_system_devices(void);
-+/*
-+ * This used to add essential system devices, but this is now done
-+ * automatically. Please don't use it in new board code.
-+ */
-+static inline void __deprecated at32_add_system_devices(void)
-+{
-+
-+}
-
- #define ATMEL_MAX_UART 4
- extern struct platform_device *atmel_default_console_device;
-@@ -43,12 +49,20 @@ struct atmel_lcdfb_info;
- struct platform_device *
- at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
- unsigned long fbmem_start, unsigned long fbmem_len,
-- unsigned int pin_config);
-+ u64 pin_mask);
-+
-+
-+struct platform_device *
-+at32_add_device_mpop(unsigned int id, struct platform_device *lcdc_pdev,
-+ unsigned long fbmem_start, unsigned long fbmem_len);
-
- struct usba_platform_data;
- struct platform_device *
- at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
-
-+struct platform_device *at32_add_device_ohci(unsigned int id);
-+struct platform_device *at32_add_device_ehci(unsigned int id);
-+
- struct ide_platform_data {
- u8 cs;
- };
-diff --git a/arch/avr32/mach-at32ap/include/mach/chip.h b/arch/avr32/mach-at32ap/include/mach/chip.h
-index 5efca6d..09c0fe7 100644
---- a/arch/avr32/mach-at32ap/include/mach/chip.h
-+++ b/arch/avr32/mach-at32ap/include/mach/chip.h
-@@ -12,6 +12,8 @@
-
- #if defined(CONFIG_CPU_AT32AP700X)
- # include <mach/at32ap700x.h>
-+#elif defined(CONFIG_CPU_AT32AP720X)
-+# include <mach/at32ap720x.h>
- #else
- # error Unknown chip type selected
- #endif
-diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h
-index 44d0bfa..f4a5f26 100644
---- a/arch/avr32/mach-at32ap/include/mach/cpu.h
-+++ b/arch/avr32/mach-at32ap/include/mach/cpu.h
-@@ -20,6 +20,19 @@
- # define cpu_is_at32ap7000() (0)
- #endif
-
-+#ifdef CONFIG_CPU_AT32AP720X
-+# define cpu_is_at32ap7200() (1)
-+#else
-+# define cpu_is_at32ap7200() (0)
-+#endif
-+
-+/*
-+ * Unfortunately, only AP700x has a non-broken COUNT/COMPARE
-+ * implementation. Other chips need to use different timers. The good
-+ * news is that these timers are usually better anyway.
-+ */
-+#define cpu_has_working_compare() (cpu_is_at32ap7000())
-+
- /*
- * Since this is AVR32, we will never run on any AT91 CPU. But these
- * definitions may reduce clutter in common drivers.
-diff --git a/arch/avr32/mach-at32ap/include/mach/hmatrix.h b/arch/avr32/mach-at32ap/include/mach/hmatrix.h
-index 7a368f2..8417737 100644
---- a/arch/avr32/mach-at32ap/include/mach/hmatrix.h
-+++ b/arch/avr32/mach-at32ap/include/mach/hmatrix.h
-@@ -15,6 +15,9 @@ extern struct clk at32_hmatrix_clk;
- void hmatrix_write_reg(unsigned long offset, u32 value);
- u32 hmatrix_read_reg(unsigned long offset);
-
-+void hmatrix_set_default_master(unsigned int slave, unsigned int master);
-+void hmatrix_set_priority(unsigned int slave, unsigned int master,
-+ unsigned int priority);
- void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask);
- void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask);
-
-@@ -33,6 +36,7 @@ void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask);
- # define HMATRIX_SCFG_DEFMSTR_NONE ( 0 << 16) /* No default master */
- # define HMATRIX_SCFG_DEFMSTR_LAST ( 1 << 16) /* Last def master */
- # define HMATRIX_SCFG_DEFMSTR_FIXED ( 2 << 16) /* Fixed def master */
-+# define HMATRIX_SCFG_DEFMSTR_MASK ( 3 << 16)
- # define HMATRIX_SCFG_FIXED_DEFMSTR(m) ((m) << 18) /* Fixed master ID */
- # define HMATRIX_SCFG_ARBT_ROUND_ROBIN ( 0 << 24) /* RR arbitration */
- # define HMATRIX_SCFG_ARBT_FIXED_PRIO ( 1 << 24) /* Fixed priority */
-@@ -52,4 +56,12 @@ void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask);
- /* Special Function Register. Bit definitions are chip-specific */
- #define HMATRIX_SFR(s) (0x0110 + 4 * (s))
-
-+#define HMATRIX_MAX_SLAVE 15
-+#define HMATRIX_MAX_MASTER 15
-+#define HMATRIX_MAX_PRIO 15
-+
-+/* Special master IDs for use with hmatrix_set_default_master() */
-+#define HMATRIX_MASTER_NONE 16 /* No default master */
-+#define HMATRIX_MASTER_LAST 17 /* Last master stays connected */
-+
- #endif /* __HMATRIX_H */
-diff --git a/arch/avr32/mach-at32ap/include/mach/init.h b/arch/avr32/mach-at32ap/include/mach/init.h
-index bc40e3d..66a6866 100644
---- a/arch/avr32/mach-at32ap/include/mach/init.h
-+++ b/arch/avr32/mach-at32ap/include/mach/init.h
-@@ -15,4 +15,10 @@ void setup_board(void);
-
- void at32_setup_serial_console(unsigned int usart_id);
-
-+/*
-+ * Called from time_init() when a broken COUNT/COMPARE implementation
-+ * is detected.
-+ */
-+void platform_time_init(void);
-+
- #endif /* __ASM_AVR32_AT32AP_INIT_H__ */
-diff --git a/arch/avr32/mach-at32ap/include/mach/io.h b/arch/avr32/mach-at32ap/include/mach/io.h
-index 4ec6abc..22ea79b 100644
---- a/arch/avr32/mach-at32ap/include/mach/io.h
-+++ b/arch/avr32/mach-at32ap/include/mach/io.h
-@@ -1,8 +1,7 @@
- #ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
- #define __ASM_AVR32_ARCH_AT32AP_IO_H
-
--/* For "bizarre" halfword swapping */
--#include <linux/byteorder/swabb.h>
-+#include <linux/swab.h>
-
- #if defined(CONFIG_AP700X_32_BIT_SMC)
- # define __swizzle_addr_b(addr) (addr ^ 3UL)
-diff --git a/arch/avr32/mach-at32ap/include/mach/irq.h b/arch/avr32/mach-at32ap/include/mach/irq.h
-index 608e350..21f37f3 100644
---- a/arch/avr32/mach-at32ap/include/mach/irq.h
-+++ b/arch/avr32/mach-at32ap/include/mach/irq.h
-@@ -6,7 +6,7 @@
- #define AT32_EXTINT(n) (EIM_IRQ_BASE + (n))
-
- #define GPIO_IRQ_BASE (EIM_IRQ_BASE + NR_EIM_IRQS)
--#define NR_GPIO_CTLR (5 /*internal*/ + 1 /*external*/)
-+#define NR_GPIO_CTLR (8 /*internal*/ + 1 /*external*/)
- #define NR_GPIO_IRQS (NR_GPIO_CTLR * 32)
-
- #define NR_IRQS (GPIO_IRQ_BASE + NR_GPIO_IRQS)
-diff --git a/arch/avr32/mach-at32ap/include/mach/pm.h b/arch/avr32/mach-at32ap/include/mach/pm.h
-index 979b355..3f65ab1 100644
---- a/arch/avr32/mach-at32ap/include/mach/pm.h
-+++ b/arch/avr32/mach-at32ap/include/mach/pm.h
-@@ -11,13 +11,17 @@
- #define __ASM_AVR32_ARCH_PM_H
-
- /* Possible arguments to the "sleep" instruction */
--#define CPU_SLEEP_IDLE 0
--#define CPU_SLEEP_FROZEN 1
--#define CPU_SLEEP_STANDBY 2
--#define CPU_SLEEP_STOP 3
--#define CPU_SLEEP_STATIC 5
-+#define CPU_SLEEP_IDLE 0x00
-+#define CPU_SLEEP_FROZEN 0x01
-+#define CPU_SLEEP_STANDBY 0x02
-+#define CPU_SLEEP_STOP 0x03
-+#define CPU_SLEEP_DEEPSTOP 0x04 /* Not valid on AP700x */
-+#define CPU_SLEEP_STATIC 0x05
-+#define CPU_SLEEP_SHUTDOWN 0x06 /* Not valid on AP700x */
-+#define CPU_SLEEP_UNMASK_IRQ 0x80 /* Not valid on AP700x */
-
- #ifndef __ASSEMBLY__
-+#if defined(CONFIG_CPU_AT32AP700X)
- extern void cpu_enter_idle(void);
- extern void cpu_enter_standby(unsigned long sdramc_base);
-
-@@ -37,15 +41,57 @@ static inline void cpu_idle_sleep(void)
- {
- /*
- * If we're using the COUNT and COMPARE registers for
-- * timekeeping, we can't use the IDLE state.
-+ * timekeeping on AP7000, we can't use the IDLE state.
- */
- if (disable_idle_sleep)
- cpu_relax();
- else
- cpu_enter_idle();
- }
-+#else
-+static inline void cpu_disable_idle_sleep(void)
-+{
-+
-+}
-+
-+static inline void cpu_enable_idle_sleep(void)
-+{
-+
-+}
-+
-+static inline void cpu_enter_idle(void)
-+{
-+ /* Enable interrupts and sleep */
-+ asm volatile("sleep %0"
-+ :
-+ : "i"(CPU_SLEEP_IDLE | CPU_SLEEP_UNMASK_IRQ)
-+ : "memory");
-+}
-+
-+static inline void cpu_idle_sleep(void)
-+{
-+ local_irq_disable();
-+ if (!test_thread_flag(TIF_NEED_RESCHED))
-+ cpu_enter_idle();
-+ local_irq_enable();
-+}
-+#endif
-
- void intc_set_suspend_handler(unsigned long offset);
-+
-+extern unsigned long at32_get_reset_cause(void);
-+
- #endif
-
-+#define AT32_RCAUSE_POR (1 << 0) /* Power-On Reset */
-+#define AT32_RCAUSE_BOD (1 << 1) /* Brown-Out Detected */
-+#define AT32_RCAUSE_EXT (1 << 2) /* External Reset */
-+#define AT32_RCAUSE_WDT (1 << 3) /* Watchdog Timeout */
-+#define AT32_RCAUSE_JTAG (1 << 4) /* JTAG Reset */
-+#define AT32_RCAUSE_NTAE (1 << 5) /* NanoTrace Access Error */
-+#define AT32_RCAUSE_SLEEP (1 << 6) /* Shutdown or Static mode */
-+#define AT32_RCAUSE_CPUERR (1 << 7) /* CPU Error */
-+#define AT32_RCAUSE_OCDRST (1 << 8) /* OCD Reset */
-+#define AT32_RCAUSE_JTAGHARD (1 << 9) /* JTAG Hard Reset */
-+
- #endif /* __ASM_AVR32_ARCH_PM_H */
-diff --git a/arch/avr32/mach-at32ap/include/mach/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h
-index b1abe6b..4873024 100644
---- a/arch/avr32/mach-at32ap/include/mach/portmux.h
-+++ b/arch/avr32/mach-at32ap/include/mach/portmux.h
-@@ -21,9 +21,10 @@
- #define AT32_GPIOF_DEGLITCH 0x00000008 /* (IN) Filter glitches */
- #define AT32_GPIOF_MULTIDRV 0x00000010 /* Enable multidriver option */
-
--void at32_select_periph(unsigned int pin, unsigned int periph,
-- unsigned long flags);
-+void at32_select_periph(unsigned int port, unsigned int pin,
-+ unsigned int periph, unsigned long flags);
- void at32_select_gpio(unsigned int pin, unsigned long flags);
--void at32_reserve_pin(unsigned int pin);
-+void at32_deselect_pin(unsigned int pin);
-+void at32_reserve_pin(unsigned int port, u32 pin_mask);
-
- #endif /* __ASM_ARCH_PORTMUX_H__ */
-diff --git a/arch/avr32/mach-at32ap/pdc.c b/arch/avr32/mach-at32ap/pdc.c
-index 1040bda..61ab15a 100644
---- a/arch/avr32/mach-at32ap/pdc.c
-+++ b/arch/avr32/mach-at32ap/pdc.c
-@@ -35,7 +35,6 @@ static int __init pdc_probe(struct platform_device *pdev)
- }
-
- static struct platform_driver pdc_driver = {
-- .probe = pdc_probe,
- .driver = {
- .name = "pdc",
- },
-@@ -43,6 +42,6 @@ static struct platform_driver pdc_driver = {
-
- static int __init pdc_init(void)
- {
-- return platform_driver_register(&pdc_driver);
-+ return platform_driver_probe(&pdc_driver, pdc_probe);
- }
- arch_initcall(pdc_init);
-diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
-index 405ee6b..09a274c 100644
---- a/arch/avr32/mach-at32ap/pio.c
-+++ b/arch/avr32/mach-at32ap/pio.c
-@@ -50,35 +50,48 @@ static struct pio_device *gpio_to_pio(unsigned int gpio)
- }
-
- /* Pin multiplexing API */
-+static DEFINE_SPINLOCK(pio_lock);
-
--void __init at32_select_periph(unsigned int pin, unsigned int periph,
-- unsigned long flags)
-+void __init at32_select_periph(unsigned int port, u32 pin_mask,
-+ unsigned int periph, unsigned long flags)
- {
- struct pio_device *pio;
-- unsigned int pin_index = pin & 0x1f;
-- u32 mask = 1 << pin_index;
-
-- pio = gpio_to_pio(pin);
-+ /* assign and verify pio */
-+ pio = gpio_to_pio(port);
- if (unlikely(!pio)) {
-- printk("pio: invalid pin %u\n", pin);
-+ printk(KERN_WARNING "pio: invalid port %u\n", port);
- goto fail;
- }
-
-- if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask)
-- || gpiochip_is_requested(&pio->chip, pin_index))) {
-- printk("%s: pin %u is busy\n", pio->name, pin_index);
-+ /* Test if any of the requested pins is already muxed */
-+ spin_lock(&pio_lock);
-+ if (unlikely(pio->pinmux_mask & pin_mask)) {
-+ printk(KERN_WARNING "%s: pin(s) busy (requested 0x%x, busy 0x%x)\n",
-+ pio->name, pin_mask, pio->pinmux_mask & pin_mask);
-+ spin_unlock(&pio_lock);
- goto fail;
- }
-
-- pio_writel(pio, PUER, mask);
-+ pio->pinmux_mask |= pin_mask;
-+
-+ /* enable pull ups */
-+ pio_writel(pio, PUER, pin_mask);
-+
-+ /* select either peripheral A or B */
- if (periph)
-- pio_writel(pio, BSR, mask);
-+ pio_writel(pio, BSR, pin_mask);
- else
-- pio_writel(pio, ASR, mask);
-+ pio_writel(pio, ASR, pin_mask);
-
-- pio_writel(pio, PDR, mask);
-+ /* enable peripheral control */
-+ pio_writel(pio, PDR, pin_mask);
-+
-+ /* Disable pull ups if not requested. */
- if (!(flags & AT32_GPIOF_PULLUP))
-- pio_writel(pio, PUDR, mask);
-+ pio_writel(pio, PUDR, pin_mask);
-+
-+ spin_unlock(&pio_lock);
-
- return;
-
-@@ -134,8 +147,11 @@ fail:
- dump_stack();
- }
-
--/* Reserve a pin, preventing anyone else from changing its configuration. */
--void __init at32_reserve_pin(unsigned int pin)
-+/*
-+ * Undo a previous pin reservation. Will not affect the hardware
-+ * configuration.
-+ */
-+void at32_deselect_pin(unsigned int pin)
- {
- struct pio_device *pio;
- unsigned int pin_index = pin & 0x1f;
-@@ -143,14 +159,37 @@ void __init at32_reserve_pin(unsigned int pin)
- pio = gpio_to_pio(pin);
- if (unlikely(!pio)) {
- printk("pio: invalid pin %u\n", pin);
-+ dump_stack();
-+ return;
-+ }
-+
-+ clear_bit(pin_index, &pio->pinmux_mask);
-+}
-+
-+/* Reserve a pin, preventing anyone else from changing its configuration. */
-+void __init at32_reserve_pin(unsigned int port, u32 pin_mask)
-+{
-+ struct pio_device *pio;
-+
-+ /* assign and verify pio */
-+ pio = gpio_to_pio(port);
-+ if (unlikely(!pio)) {
-+ printk(KERN_WARNING "pio: invalid port %u\n", port);
- goto fail;
- }
-
-- if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) {
-- printk("%s: pin %u is busy\n", pio->name, pin_index);
-+ /* Test if any of the requested pins is already muxed */
-+ spin_lock(&pio_lock);
-+ if (unlikely(pio->pinmux_mask & pin_mask)) {
-+ printk(KERN_WARNING "%s: pin(s) busy (req. 0x%x, busy 0x%x)\n",
-+ pio->name, pin_mask, pio->pinmux_mask & pin_mask);
-+ spin_unlock(&pio_lock);
- goto fail;
- }
-
-+ /* Reserve pins */
-+ pio->pinmux_mask |= pin_mask;
-+ spin_unlock(&pio_lock);
- return;
-
- fail:
-@@ -382,7 +421,6 @@ static int __init pio_probe(struct platform_device *pdev)
- }
-
- static struct platform_driver pio_driver = {
-- .probe = pio_probe,
- .driver = {
- .name = "pio",
- },
-@@ -390,7 +428,7 @@ static struct platform_driver pio_driver = {
-
- static int __init pio_init(void)
- {
-- return platform_driver_register(&pio_driver);
-+ return platform_driver_probe(&pio_driver, pio_probe);
- }
- postcore_initcall(pio_init);
-
-diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S
-index 17503b0..3d210f8 100644
---- a/arch/avr32/mach-at32ap/pm-at32ap700x.S
-+++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S
-@@ -12,12 +12,9 @@
- #include <asm/thread_info.h>
- #include <mach/pm.h>
-
--#include "pm.h"
-+#include "pm-v1.h"
- #include "sdramc.h"
-
--/* Same as 0xfff00000 but fits in a 21 bit signed immediate */
--#define PM_BASE -0x100000
--
- .section .bss, "wa", @nobits
- .global disable_idle_sleep
- .type disable_idle_sleep, @object
-diff --git a/arch/avr32/mach-at32ap/pm-at32ap720x.S b/arch/avr32/mach-at32ap/pm-at32ap720x.S
-new file mode 100644
-index 0000000..a765aa5
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/pm-at32ap720x.S
-@@ -0,0 +1,110 @@
-+/*
-+ * Low-level Power Management code.
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <asm/asm.h>
-+#include <asm/asm-offsets.h>
-+#include <asm/thread_info.h>
-+#include <mach/pm.h>
-+
-+#include "pm-v3.h"
-+#include "sdramc.h"
-+
-+#ifdef CONFIG_PM
-+ .section .init.text, "ax", @progbits
-+
-+ .global pm_exception
-+ .type pm_exception, @function
-+pm_exception:
-+ /*
-+ * Exceptions are masked when we switch to this handler, so
-+ * we'll only get "unrecoverable" exceptions (offset 0.)
-+ */
-+ sub r12, pc, . - .Lpanic_msg
-+ lddpc pc, .Lpanic_addr
-+
-+ .align 2
-+.Lpanic_addr:
-+ .long panic
-+.Lpanic_msg:
-+ .asciz "Unrecoverable exception during suspend\n"
-+ .size pm_exception, . - pm_exception
-+
-+ .global pm_irq0
-+ .type pm_irq0, @function
-+pm_irq0:
-+ /* Disable interrupts and return after the sleep instruction */
-+ mfsr r9, SYSREG_RSR_INT0
-+ mtsr SYSREG_RAR_INT0, r8
-+ sbr r9, SYSREG_GM_OFFSET
-+ mtsr SYSREG_RSR_INT0, r9
-+ rete
-+
-+ /*
-+ * void cpu_enter_standby(unsigned long sdramc_base)
-+ *
-+ * Enter PM_SUSPEND_STANDBY mode. At this point, all drivers
-+ * are suspended and interrupts are disabled. Interrupts
-+ * marked as 'wakeup' event sources may still come along and
-+ * get us out of here.
-+ *
-+ * The SDRAM will be put into self-refresh mode (which does
-+ * not require a clock from the CPU), and the CPU will be put
-+ * into "frozen" mode (HSB bus stopped). The SDRAM controller
-+ * will automatically bring the SDRAM into normal mode on the
-+ * first access, and the power manager will automatically
-+ * start the HSB and CPU clocks upon a wakeup event.
-+ */
-+ .global pm_standby
-+ .type pm_standby, @function
-+pm_standby:
-+ /*
-+ * interrupts are already masked at this point, and EVBA
-+ * points to pm_exception above.
-+ */
-+ ld.w r10, r12[SDRAMC_LPR]
-+ sub r8, pc, . - 1f /* return address for irq handler */
-+ mov r11, SDRAMC_LPR_LPCB_SELF_RFR
-+ bfins r10, r11, 0, 2 /* LPCB <- self Refresh */
-+ sync 0 /* flush write buffer */
-+ st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */
-+ ld.w r11, r12[SDRAMC_LPR]
-+ sleep CPU_SLEEP_FROZEN | CPU_SLEEP_UNMASK_IRQ
-+1: mask_interrupts
-+ retal r12
-+ .size pm_standby, . - pm_standby
-+
-+ .global pm_suspend_to_ram
-+ .type pm_suspend_to_ram, @function
-+pm_suspend_to_ram:
-+ /*
-+ * interrupts are already masked at this point, and EVBA
-+ * points to pm_exception above.
-+ */
-+ mov r11, 0
-+ cache r11[2], 8 /* clean all dcache lines */
-+ sync 0 /* flush write buffer */
-+ ld.w r10, r12[SDRAMC_LPR]
-+ sub r8, pc, . - 1f /* return address for irq handler */
-+ mov r11, SDRAMC_LPR_LPCB_SELF_RFR
-+ bfins r10, r11, 0, 2 /* LPCB <- self refresh */
-+ st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */
-+ ld.w r11, r12[SDRAMC_LPR]
-+
-+ sleep CPU_SLEEP_STOP | CPU_SLEEP_UNMASK_IRQ
-+1: mask_interrupts
-+
-+ retal r12
-+ .size pm_suspend_to_ram, . - pm_suspend_to_ram
-+
-+ .global pm_sram_end
-+ .type pm_sram_end, @function
-+pm_sram_end:
-+ .size pm_sram_end, 0
-+
-+#endif /* CONFIG_PM */
-diff --git a/arch/avr32/mach-at32ap/pm-v1.h b/arch/avr32/mach-at32ap/pm-v1.h
-new file mode 100644
-index 0000000..532a373
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/pm-v1.h
-@@ -0,0 +1,112 @@
-+/*
-+ * Register definitions for the Power Manager (PM)
-+ */
-+#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
-+#define __ARCH_AVR32_MACH_AT32AP_PM_H__
-+
-+/* PM register offsets */
-+#define PM_MCCTRL 0x0000
-+#define PM_CKSEL 0x0004
-+#define PM_CPU_MASK 0x0008
-+#define PM_HSB_MASK 0x000c
-+#define PM_PBA_MASK 0x0010
-+#define PM_PBB_MASK 0x0014
-+#define PM_PLL0 0x0020
-+#define PM_PLL1 0x0024
-+#define PM_IER 0x0040
-+#define PM_IDR 0x0044
-+#define PM_IMR 0x0048
-+#define PM_ISR 0x004c
-+#define PM_ICR 0x0050
-+#define PM_GCCTRL(x) (0x0060 + 4 * (x))
-+#define PM_RCAUSE 0x00c0
-+
-+/* Bitfields in CKSEL */
-+#define PM_CPUSEL_OFFSET 0
-+#define PM_CPUSEL_SIZE 3
-+#define PM_CPUDIV_OFFSET 7
-+#define PM_CPUDIV_SIZE 1
-+#define PM_HSBSEL_OFFSET 8
-+#define PM_HSBSEL_SIZE 3
-+#define PM_HSBDIV_OFFSET 15
-+#define PM_HSBDIV_SIZE 1
-+#define PM_PBASEL_OFFSET 16
-+#define PM_PBASEL_SIZE 3
-+#define PM_PBADIV_OFFSET 23
-+#define PM_PBADIV_SIZE 1
-+#define PM_PBBSEL_OFFSET 24
-+#define PM_PBBSEL_SIZE 3
-+#define PM_PBBDIV_OFFSET 31
-+#define PM_PBBDIV_SIZE 1
-+
-+/* Bitfields in PLL0 */
-+#define PM_PLLEN_OFFSET 0
-+#define PM_PLLEN_SIZE 1
-+#define PM_PLLOSC_OFFSET 1
-+#define PM_PLLOSC_SIZE 1
-+#define PM_PLLOPT_OFFSET 2
-+#define PM_PLLOPT_SIZE 3
-+#define PM_PLLDIV_OFFSET 8
-+#define PM_PLLDIV_SIZE 8
-+#define PM_PLLMUL_OFFSET 16
-+#define PM_PLLMUL_SIZE 8
-+#define PM_PLLCOUNT_OFFSET 24
-+#define PM_PLLCOUNT_SIZE 6
-+#define PM_PLLTEST_OFFSET 31
-+#define PM_PLLTEST_SIZE 1
-+
-+/* Bitfields in ICR */
-+#define PM_LOCK0_OFFSET 0
-+#define PM_LOCK0_SIZE 1
-+#define PM_LOCK1_OFFSET 1
-+#define PM_LOCK1_SIZE 1
-+#define PM_WAKE_OFFSET 2
-+#define PM_WAKE_SIZE 1
-+#define PM_CKRDY_OFFSET 5
-+#define PM_CKRDY_SIZE 1
-+#define PM_MSKRDY_OFFSET 6
-+#define PM_MSKRDY_SIZE 1
-+
-+/* Bitfields in GCCTRL0 */
-+#define PM_OSCSEL_OFFSET 0
-+#define PM_OSCSEL_SIZE 1
-+#define PM_PLLSEL_OFFSET 1
-+#define PM_PLLSEL_SIZE 1
-+#define PM_CEN_OFFSET 2
-+#define PM_CEN_SIZE 1
-+#define PM_DIVEN_OFFSET 4
-+#define PM_DIVEN_SIZE 1
-+#define PM_DIV_OFFSET 8
-+#define PM_DIV_SIZE 8
-+
-+/* Bitfields in RCAUSE */
-+#define PM_POR_OFFSET 0
-+#define PM_POR_SIZE 1
-+#define PM_EXT_OFFSET 2
-+#define PM_EXT_SIZE 1
-+#define PM_WDT_OFFSET 3
-+#define PM_WDT_SIZE 1
-+#define PM_NTAE_OFFSET 4
-+#define PM_NTAE_SIZE 1
-+
-+/* Bit manipulation macros */
-+#define PM_BIT(name) \
-+ (1 << PM_##name##_OFFSET)
-+#define PM_BF(name,value) \
-+ (((value) & ((1 << PM_##name##_SIZE) - 1)) \
-+ << PM_##name##_OFFSET)
-+#define PM_BFEXT(name,value) \
-+ (((value) >> PM_##name##_OFFSET) \
-+ & ((1 << PM_##name##_SIZE) - 1))
-+#define PM_BFINS(name,value,old)\
-+ (((old) & ~(((1 << PM_##name##_SIZE) - 1) \
-+ << PM_##name##_OFFSET)) \
-+ | PM_BF(name,value))
-+
-+/* Register access macros */
-+#define pm_readl(reg) \
-+ __raw_readl((void __iomem __force *)PM_BASE + PM_##reg)
-+#define pm_writel(reg,value) \
-+ __raw_writel((value), (void __iomem __force *)PM_BASE + PM_##reg)
-+
-+#endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */
-diff --git a/arch/avr32/mach-at32ap/pm-v3.h b/arch/avr32/mach-at32ap/pm-v3.h
-new file mode 100644
-index 0000000..3c507b9
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/pm-v3.h
-@@ -0,0 +1,283 @@
-+/*
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __PM_V3_H__
-+#define __PM_V3_H__
-+
-+#include <mach/chip.h>
-+
-+/* PM Register offsets */
-+#ifndef __ASSEMBLY__
-+struct pm_regs {
-+ u32 MCCTRL; /* Main Clock Control */
-+ u32 CKSEL; /* Clock Select */
-+ u32 CPUMASK; /* CPU Clock Mask */
-+ u32 HSBMASK; /* HSB Clock Mask */
-+ u32 PBAMASK; /* PBA Clock Mask */
-+ u32 PBBMASK; /* PBB Clock Mask */
-+ u32 PBADIVMASK; /* Divided PBA Clock Mask */
-+ u32 PBBDIVMASK; /* Divided PBB Clock Mask */
-+ u32 __reserved1[8];
-+ u32 PLL[3]; /* PLL Control */
-+ u32 __reserved2[13];
-+ u32 OSCCTRL[3]; /* Oscillator Control */
-+ u32 __reserved3[5];
-+ u32 OSCCTRL32; /* 32 kHz Oscillator Control */
-+ u32 __reserved4[7];
-+ u32 IER; /* Interrupt Enable */
-+ u32 IDR; /* Interrupt Disable */
-+ u32 IMR; /* Interrupt Mask */
-+ u32 ISR; /* Interrupt Status */
-+ u32 ICR; /* Interrupt Clear */
-+ u32 POSCSR; /* Power and Oscillator Status */
-+ u32 __reserved5[10];
-+ u32 GCCTRL[8]; /* Generic Clock Control */
-+ u32 __reserved6[8];
-+ u32 RCCR; /* RC Oscillator Calibration */
-+ u32 BGCR; /* Bandgap Calibration */
-+ u32 VREGCR; /* Buck Regulator Calibration */
-+ u32 BOD; /* BOD Level */
-+ u32 PPCR; /* Peripheral Power Control */
-+ u32 __reserved7[11];
-+ u32 RCAUSE; /* Reset Cause */
-+ u32 WCAUSE; /* Wake Cause */
-+ u32 AWEN; /* Asynchronous Wake Enable */
-+ u32 __reserved8[14];
-+ u32 GPLP; /* General Purpose Low-Power */
-+};
-+#endif
-+
-+/* Assembly-friendly register offsets; same as above */
-+#define PM_MCCTRL 0x0000
-+#define PM_CKSEL 0x0004
-+#define PM_CPUMASK 0x0008
-+#define PM_HSBMASK 0x000c
-+#define PM_PBAMASK 0x0010
-+#define PM_PBBMASK 0x0014
-+#define PM_PBADIVMASK 0x0018
-+#define PM_PBBDIVMASK 0x001c
-+#define PM_PLL0 0x0040
-+#define PM_PLL1 0x0044
-+#define PM_PLL2 0x0048
-+#define PM_OSCCTRL0 0x0080
-+#define PM_OSCCTRL1 0x0084
-+#define PM_OSCCTRL2 0x0088
-+#define PM_OSCCTRL32 0x00a0
-+#define PM_IER 0x00c0
-+#define PM_IDR 0x00c4
-+#define PM_IMR 0x00c8
-+#define PM_ISR 0x00cc
-+#define PM_ICR 0x00d0
-+#define PM_POSCSR 0x00d4
-+#define PM_GCCTRL 0x0100
-+#define PM_RCCR 0x0140
-+#define PM_BGCR 0x0144
-+#define PM_VREGCR 0x0148
-+#define PM_BOD 0x014c
-+#define PM_PPCR 0x0150
-+#define PM_RC_RCAUSE 0x0180
-+#define PM_WCAUSE 0x0184
-+#define PM_AWEN 0x0188
-+#define PM_GPLP 0x01c0
-+
-+/* Bits in MCCTRL */
-+#define PM_MCCTRL_MCSEL_START 0
-+#define PM_MCCTRL_MCSEL_SIZE 2
-+#define PM_MCCTRL_OSC0EN_BIT 2
-+#define PM_MCCTRL_OSC1EN_BIT 3
-+#define PM_MCCTRL_OSC2EN_BIT 4
-+#define PM_MCCTRL_CRIPEL_BIT 24
-+
-+/* Bits in CKSEL */
-+#define PM_CKSEL_CPUSEL_START 0
-+#define PM_CKSEL_CPUSEL_SIZE 3
-+#define PM_CKSEL_CPUDIV_BIT 7
-+#define PM_CKSEL_HSBSEL_START 8
-+#define PM_CKSEL_HSBSEL_SIZE 3
-+#define PM_CKSEL_HSBDIV_BIT 15
-+#define PM_CKSEL_PBASEL_START 16
-+#define PM_CKSEL_PBASEL_SIZE 3
-+#define PM_CKSEL_PBADIV_BIT 23
-+#define PM_CKSEL_PBBSEL_START 24
-+#define PM_CKSEL_PBBSEL_SIZE 3
-+#define PM_CKSEL_PBBDIV_BIT 31
-+
-+/* Bits in CPUMASK */
-+#define PM_CPUMASK_SYSTIMER_BIT 16
-+
-+/* Bits in PLLx */
-+#define PM_PLLx_PLLEN_BIT 0
-+#define PM_PLLx_PLLOSC_START 1
-+#define PM_PLLx_PLLOSC_SIZE 2
-+#define PM_PLLx_PLLOPT_START 3
-+#define PM_PLLx_PLLOPT_SIZE 3
-+#define PM_PLLx_PLLBPL_BIT 7
-+#define PM_PLLx_PLLDIV_START 8
-+#define PM_PLLx_PLLDIV_SIZE 6
-+#define PM_PLLx_PLLMUL_START 16
-+#define PM_PLLx_PLLMUL_SIZE 6
-+#define PM_PLLx_PLLCOUNT_START 24
-+#define PM_PLLx_PLLCOUNT_SIZE 6
-+#define PM_PLLx_PLLIOTESTEN_BIT 30
-+#define PM_PLLx_PLLTEST_BIT 31
-+
-+/* Bits in OSCCTRLx */
-+#define PM_OSCCTRLx_MODE_START 0
-+#define PM_OSCCTRLx_MODE_SIZE 4
-+#define PM_OSCCTRLx_STARTUP_START 8
-+#define PM_OSCCTRLx_STARTUP_SIZE 3
-+
-+/* Bits in OSCCTRL32 */
-+#define PM_OSCCTRL32_OSC32EN_BIT 0
-+#define PM_OSCCTRL32_MODE_START 8
-+#define PM_OSCCTRL32_MODE_SIZE 3
-+#define PM_OSCCTRL32_STARTUP_START 16
-+#define PM_OSCCTRL32_STARTUP_SIZE 3
-+
-+/* Bits in IER/IDR/IMR/ISR/ICR */
-+#define PM_ISR_OSC0RDY_BIT 0
-+#define PM_ISR_OSC1RDY_BIT 1
-+#define PM_ISR_OSC2RDY_BIT 2
-+#define PM_ISR_OSC32RDY_BIT 7
-+#define PM_ISR_LOCK0_BIT 8
-+#define PM_ISR_LOCK1_BIT 9
-+#define PM_ISR_LOCK2_BIT 10
-+#define PM_ISR_LOCK0LOST_BIT 16
-+#define PM_ISR_LOCK1LOST_BIT 17
-+#define PM_ISR_LOCK2LOST_BIT 18
-+#define PM_ISR_CKRDY_BIT 24
-+#define PM_ISR_MSKRDY_BIT 25
-+#define PM_ISR_WAKE_BIT 26
-+#define PM_ISR_BODDET_BIT 27
-+#define PM_ISR_PERRDY_BIT 28
-+
-+/* Bits in POSCSR */
-+#define PM_POSCSR_OSC0RDY_BIT 0
-+#define PM_POSCSR_OSC1RDY_BIT 1
-+#define PM_POSCSR_OSC32RDY_BIT 7
-+#define PM_POSCSR_LOCK0_BIT 8
-+#define PM_POSCSR_LOCK1_BIT 9
-+#define PM_POSCSR_LOCK0LOST_BIT 16
-+#define PM_POSCSR_LOCK1LOST_BIT 17
-+#define PM_POSCSR_CKRDY_BIT 24
-+#define PM_POSCSR_MSKRDY_BIT 25
-+#define PM_POSCSR_WAKE_BIT 26
-+#define PM_POSCSR_BODDET_BIT 27
-+#define PM_POSCSR_PERRDY_BIT 28
-+
-+/* Bits in GCCTRL */
-+#define PM_GCCTRL_CEN_BIT 0
-+#define PM_GCCTRL_DIVEN_BIT 1
-+#define PM_GCCTRL_OSCSEL_START 8
-+#define PM_GCCTRL_OSCSEL_SIZE 4
-+#define PM_GCCTRL_DIV_START 16
-+#define PM_GCCTRL_DIV_SIZE 8
-+
-+/* Bits in RCCR */
-+#define PM_RCCR_CALIB_START 0
-+#define PM_RCCR_CALIB_SIZE 10
-+#define PM_RCCR_FCD_BIT 16
-+#define PM_RCCR_KEY_START 24
-+#define PM_RCCR_KEY_SIZE 8
-+
-+/* Bits in BGCR */
-+#define PM_BGCR_CALIB_START 0
-+#define PM_BGCR_CALIB_SIZE 3
-+#define PM_BGCR_FCD_BIT 16
-+#define PM_BGCR_KEY_START 24
-+#define PM_BGCR_KEY_SIZE 8
-+
-+/* Bits in VREGCR */
-+#define PM_VREGCR_CALIB_START 0
-+#define PM_VREGCR_CALIB_SIZE 3
-+#define PM_VREGCR_FCD_BIT 16
-+#define PM_VREGCR_KEY_START 24
-+#define PM_VREGCR_KEY_SIZE 8
-+
-+/* Bits in BOD */
-+#define PM_BOD_LEVEL_START 0
-+#define PM_BOD_LEVEL_SIZE 6
-+#define PM_BOD_HYST_BIT 6
-+#define PM_BOD_CTRL_START 8
-+#define PM_BOD_CTRL_SIZE 2
-+#define PM_BOD_FCD_BIT 16
-+#define PM_BOD_KEY_START 24
-+#define PM_BOD_KEY_SIZE 8
-+
-+/* Bits in PPCR */
-+#define PM_PPCR_EBI_VOLT_BIT 0
-+#define PM_PPCR_UTMI_CTRL_BIT 1
-+#define PM_PPCR_KEY_START 24
-+#define PM_PPCR_KEY_SIZE 8
-+
-+/* Bits in RC_RCAUSE */
-+#define PM_RC_RCAUSE_POR_BIT 0
-+#define PM_RC_RCAUSE_BOD_BIT 1
-+#define PM_RC_RCAUSE_EXT_BIT 2
-+#define PM_RC_RCAUSE_WDT_BIT 3
-+#define PM_RC_RCAUSE_JTAG_BIT 4
-+#define PM_RC_RCAUSE_NTAE_BIT 5
-+#define PM_RC_RCAUSE_SLEEP_BIT 6
-+#define PM_RC_RCAUSE_CPUERR_BIT 7
-+#define PM_RC_RCAUSE_OCDRST_BIT 8
-+#define PM_RC_RCAUSE_JTAGHARD_BIT 9
-+
-+/* Bits in WCAUSE */
-+#define PM_WCAUSE_PERIPH0_BIT 0
-+#define PM_WCAUSE_PERIPH1_BIT 1
-+#define PM_WCAUSE_EIC_BIT 16
-+#define PM_WCAUSE_RTC_BIT 17
-+
-+/* Constants for MCCTRL:MCSEL */
-+#define PM_MCSEL_SLOW 0
-+#define PM_MCSEL_OSC0 1
-+#define PM_MCSEL_PLL0 2
-+
-+/* Constants for OSCCTRLx:MODE */
-+#define PM_MODE_EXT_CLOCK 0
-+#define PM_MODE_CRYSTAL_ACG 1
-+#define PM_MODE_CRYSTAL_G0 4
-+#define PM_MODE_CRYSTAL_G1 5
-+#define PM_MODE_CRYSTAL_G2 6
-+#define PM_MODE_CRYSTAL_G3 7
-+
-+/* Constants for GCCTRL:OSCSEL */
-+#define PM_OSCSEL_SLOW 0
-+#define PM_OSCSEL_CLK32 1
-+#define PM_OSCSEL_OSC0 2
-+#define PM_OSCSEL_OSC1 3
-+#define PM_OSCSEL_PLL0 4
-+#define PM_OSCSEL_PLL1 5
-+
-+/* Constants for BOD:CTRL */
-+#define PM_CTRL_OFF1 0
-+#define PM_CTRL_ENABLED 1
-+#define PM_CTRL_ENABLED_NORESET 2
-+#define PM_CTRL_OFF2 3
-+
-+/* Bit manipulation macros */
-+#define PM_BIT(name) \
-+ (1 << PM_##name##_BIT)
-+#define PM_BF(name,value) \
-+ (((value) & ((1 << PM_##name##_SIZE) - 1)) \
-+ << PM_##name##_START)
-+#define PM_BFEXT(name,value) \
-+ (((value) >> PM_##name##_START) \
-+ & ((1 << PM_##name##_SIZE) - 1))
-+#define PM_BFINS(name,value,old) \
-+ (((old) & ~(((1 << PM_##name##_SIZE) - 1) \
-+ << PM_##name##_START)) \
-+ | PM_BF(name,value))
-+
-+/* Register access macros */
-+#define __pm_regs ((struct pm_regs __iomem __force *)PM_BASE)
-+#define pm_readl(reg) \
-+ __raw_readl(&__pm_regs->reg)
-+#define pm_writel(reg, value) \
-+ __raw_writel(value, &__pm_regs->reg)
-+
-+#endif /* __PM_V3_H__ */
-diff --git a/arch/avr32/mach-at32ap/pm.h b/arch/avr32/mach-at32ap/pm.h
-deleted file mode 100644
-index 532a373..0000000
---- a/arch/avr32/mach-at32ap/pm.h
-+++ /dev/null
-@@ -1,112 +0,0 @@
--/*
-- * Register definitions for the Power Manager (PM)
-- */
--#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
--#define __ARCH_AVR32_MACH_AT32AP_PM_H__
--
--/* PM register offsets */
--#define PM_MCCTRL 0x0000
--#define PM_CKSEL 0x0004
--#define PM_CPU_MASK 0x0008
--#define PM_HSB_MASK 0x000c
--#define PM_PBA_MASK 0x0010
--#define PM_PBB_MASK 0x0014
--#define PM_PLL0 0x0020
--#define PM_PLL1 0x0024
--#define PM_IER 0x0040
--#define PM_IDR 0x0044
--#define PM_IMR 0x0048
--#define PM_ISR 0x004c
--#define PM_ICR 0x0050
--#define PM_GCCTRL(x) (0x0060 + 4 * (x))
--#define PM_RCAUSE 0x00c0
--
--/* Bitfields in CKSEL */
--#define PM_CPUSEL_OFFSET 0
--#define PM_CPUSEL_SIZE 3
--#define PM_CPUDIV_OFFSET 7
--#define PM_CPUDIV_SIZE 1
--#define PM_HSBSEL_OFFSET 8
--#define PM_HSBSEL_SIZE 3
--#define PM_HSBDIV_OFFSET 15
--#define PM_HSBDIV_SIZE 1
--#define PM_PBASEL_OFFSET 16
--#define PM_PBASEL_SIZE 3
--#define PM_PBADIV_OFFSET 23
--#define PM_PBADIV_SIZE 1
--#define PM_PBBSEL_OFFSET 24
--#define PM_PBBSEL_SIZE 3
--#define PM_PBBDIV_OFFSET 31
--#define PM_PBBDIV_SIZE 1
--
--/* Bitfields in PLL0 */
--#define PM_PLLEN_OFFSET 0
--#define PM_PLLEN_SIZE 1
--#define PM_PLLOSC_OFFSET 1
--#define PM_PLLOSC_SIZE 1
--#define PM_PLLOPT_OFFSET 2
--#define PM_PLLOPT_SIZE 3
--#define PM_PLLDIV_OFFSET 8
--#define PM_PLLDIV_SIZE 8
--#define PM_PLLMUL_OFFSET 16
--#define PM_PLLMUL_SIZE 8
--#define PM_PLLCOUNT_OFFSET 24
--#define PM_PLLCOUNT_SIZE 6
--#define PM_PLLTEST_OFFSET 31
--#define PM_PLLTEST_SIZE 1
--
--/* Bitfields in ICR */
--#define PM_LOCK0_OFFSET 0
--#define PM_LOCK0_SIZE 1
--#define PM_LOCK1_OFFSET 1
--#define PM_LOCK1_SIZE 1
--#define PM_WAKE_OFFSET 2
--#define PM_WAKE_SIZE 1
--#define PM_CKRDY_OFFSET 5
--#define PM_CKRDY_SIZE 1
--#define PM_MSKRDY_OFFSET 6
--#define PM_MSKRDY_SIZE 1
--
--/* Bitfields in GCCTRL0 */
--#define PM_OSCSEL_OFFSET 0
--#define PM_OSCSEL_SIZE 1
--#define PM_PLLSEL_OFFSET 1
--#define PM_PLLSEL_SIZE 1
--#define PM_CEN_OFFSET 2
--#define PM_CEN_SIZE 1
--#define PM_DIVEN_OFFSET 4
--#define PM_DIVEN_SIZE 1
--#define PM_DIV_OFFSET 8
--#define PM_DIV_SIZE 8
--
--/* Bitfields in RCAUSE */
--#define PM_POR_OFFSET 0
--#define PM_POR_SIZE 1
--#define PM_EXT_OFFSET 2
--#define PM_EXT_SIZE 1
--#define PM_WDT_OFFSET 3
--#define PM_WDT_SIZE 1
--#define PM_NTAE_OFFSET 4
--#define PM_NTAE_SIZE 1
--
--/* Bit manipulation macros */
--#define PM_BIT(name) \
-- (1 << PM_##name##_OFFSET)
--#define PM_BF(name,value) \
-- (((value) & ((1 << PM_##name##_SIZE) - 1)) \
-- << PM_##name##_OFFSET)
--#define PM_BFEXT(name,value) \
-- (((value) >> PM_##name##_OFFSET) \
-- & ((1 << PM_##name##_SIZE) - 1))
--#define PM_BFINS(name,value,old)\
-- (((old) & ~(((1 << PM_##name##_SIZE) - 1) \
-- << PM_##name##_OFFSET)) \
-- | PM_BF(name,value))
--
--/* Register access macros */
--#define pm_readl(reg) \
-- __raw_readl((void __iomem __force *)PM_BASE + PM_##reg)
--#define pm_writel(reg,value) \
-- __raw_writel((value), (void __iomem __force *)PM_BASE + PM_##reg)
--
--#endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */
-diff --git a/arch/avr32/mach-at32ap/sdc.h b/arch/avr32/mach-at32ap/sdc.h
-new file mode 100644
-index 0000000..6f5ec00
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/sdc.h
-@@ -0,0 +1,103 @@
-+/* SDC */
-+
-+/* Register offsets */
-+#define SDC_CTRL 0x0000
-+#define SDC_ASYNC 0x0004
-+#define SDC_SYNC 0x0008
-+#define SDC_FILTERDUR 0x000c
-+#define SDC_OSCCTRL32 0x0010
-+#define SDC_STATUS 0x0014
-+#define SDC_ECR 0x0018
-+#define SDC_IER 0x001c
-+#define SDC_IDR 0x0020
-+#define SDC_IMR 0x0024
-+#define SDC_GPLP 0x0040
-+
-+/* Bits in CTRL */
-+#define SDC_CTRL_PIN_EN_BIT 0
-+#define SDC_CTRL_AST_EN_BIT 8
-+#define SDC_CTRL_WDT_EN_BIT 9
-+#define SDC_CTRL_OCD_EN_BIT 10
-+#define SDC_CTRL_JTAG_EN_BIT 11
-+#define SDC_CTRL_CORE_POR_TEST_BIT 23
-+#define SDC_CTRL_KEY_START 24
-+#define SDC_CTRL_KEY_SIZE 8
-+
-+/* Bits in ASYNC */
-+#define SDC_ASYNC_MODE_BIT 4
-+#define SDC_ASYNC_POL_BIT 8
-+#define SDC_ASYNC_KEY_START 24
-+#define SDC_ASYNC_KEY_SIZE 8
-+
-+/* Bits in SYNC */
-+#define SDC_SYNC_EN_BIT 0
-+#define SDC_SYNC_MODE_BIT 4
-+#define SDC_SYNC_POL_BIT 8
-+#define SDC_SYNC_FILTER_BIT 12
-+#define SDC_SYNC_KEY_START 24
-+#define SDC_SYNC_KEY_SIZE 8
-+
-+/* Bits in FILTERDUR */
-+#define SDC_FILTERDUR_Duration_START 0
-+#define SDC_FILTERDUR_Duration_SIZE 16
-+#define SDC_FILTERDUR_KEY_START 24
-+#define SDC_FILTERDUR_KEY_SIZE 8
-+
-+/* Bits in OSCCTRL32 */
-+#define SDC_OSCCTRL32_OSC32EN_BIT 0
-+#define SDC_OSCCTRL32_MODE_START 8
-+#define SDC_OSCCTRL32_MODE_SIZE 4
-+#define SDC_OSCCTRL32_STARTUP_START 16
-+#define SDC_OSCCTRL32_STARTUP_SIZE 3
-+#define SDC_OSCCTRL32_KEY_START 24
-+#define SDC_OSCCTRL32_KEY_SIZE 8
-+
-+/* Bits in STATUS */
-+#define SDC_STATUS_PIN_EVENT_BIT 0
-+#define SDC_STATUS_AST_EVENT_BIT 8
-+#define SDC_STATUS_WDT_EVENT_BIT 9
-+#define SDC_STATUS_OCD_EVENT_BIT 10
-+#define SDC_STATUS_JTAG_EVENT_BIT 11
-+#define SDC_STATUS_PIN_BIT 16
-+#define SDC_STATUS_BUSY_BIT 24
-+#define SDC_STATUS_SWTCH_BIT 30
-+#define SDC_STATUS_VBAT_BIT 31
-+
-+/* Bits in ECR */
-+#define SDC_ECR_PIN_EVENT_BIT 0
-+#define SDC_ECR_AST_EVENT_BIT 8
-+#define SDC_ECR_WDT_EVENT_BIT 9
-+#define SDC_ECR_OCD_EVENT_BIT 10
-+#define SDC_ECR_JTAG_EVENT_BIT 11
-+
-+/* Bits in IER */
-+#define SDC_IER_PIN_EVENT_BIT 0
-+#define SDC_IER_READY_BIT 24
-+
-+/* Bits in IDR */
-+#define SDC_IDR_PIN_EVENT_BIT 0
-+#define SDC_IDR_READY_BIT 24
-+
-+/* Bits in IMR */
-+#define SDC_IMR_PIN_EVENT_BIT 0
-+#define SDC_IMR_READY_BIT 24
-+
-+/* Bit manipulation macros */
-+#define SDC_BIT(name) \
-+ (1 << SDC_##name##_BIT)
-+#define SDC_BF(name,value) \
-+ (((value) & ((1 << SDC_##name##_SIZE) - 1)) \
-+ << SDC_##name##_START)
-+#define SDC_BFEXT(name,value) \
-+ (((value) >> SDC_##name##_START) \
-+ & ((1 << SDC_##name##_SIZE) - 1))
-+#define SDC_BFINS(name,value,old) \
-+ (((old) & ~(((1 << SDC_##name##_SIZE) - 1) \
-+ << SDC_##name##_START)) \
-+ | SDC_BF(name,value))
-+
-+/* Register access macros */
-+#define sdc_readl(reg) \
-+ __raw_readl((void __iomem __force *)(SDC_BASE + SDC_##reg))
-+#define sdc_writel(reg, value) \
-+ __raw_writel(value, (void __iomem __force *)(SDC_BASE + SDC_##reg))
-diff --git a/arch/avr32/mach-at32ap/timer-ast.c b/arch/avr32/mach-at32ap/timer-ast.c
-new file mode 100644
-index 0000000..0afff19
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/timer-ast.c
-@@ -0,0 +1,191 @@
-+/*
-+ * Asynchronous Timer (AST) used as clocksource / clockevent
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/clockchips.h>
-+#include <linux/clocksource.h>
-+#include <linux/interrupt.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/irq.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/ast_regs.h>
-+
-+static void __iomem *ast_regs;
-+
-+static inline void ast_wait_ready(void)
-+{
-+ while (ast_readl(ast_regs, SR) & AST_BIT(BUSY))
-+ cpu_relax();
-+}
-+
-+static cycle_t read_ast_counter(void)
-+{
-+ return ast_readl(ast_regs, CV);
-+}
-+
-+static struct clocksource ast_clksrc = {
-+ .name = "ast",
-+ .rating = 400,
-+ .read = read_ast_counter,
-+ .mask = CLOCKSOURCE_MASK(32),
-+ .shift = 16,
-+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-+};
-+
-+static irqreturn_t ast_clkevt_interrupt(int irq, void *dev_id)
-+{
-+ struct clock_event_device *clkevt = dev_id;
-+
-+ /*
-+ * We make sure delta is always long enough so that the BUSY
-+ * bit is never set at this point.
-+ */
-+ ast_writel(ast_regs, SCR, AST_BIT(ALARM0));
-+ clkevt->event_handler(clkevt);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct irqaction ast_clkevt_irqaction = {
-+ .handler = ast_clkevt_interrupt,
-+ .flags = IRQF_TIMER | IRQF_DISABLED,
-+ .name = "timer-ast",
-+};
-+
-+static int ast_next_event(unsigned long delta,
-+ struct clock_event_device *clkevt)
-+{
-+ ast_wait_ready();
-+ ast_writel(ast_regs, AR0, ast_readl(ast_regs, CV) + delta);
-+
-+ return 0;
-+}
-+
-+static void ast_mode(enum clock_event_mode mode,
-+ struct clock_event_device *evdev)
-+{
-+ switch (mode) {
-+ case CLOCK_EVT_MODE_ONESHOT:
-+ case CLOCK_EVT_MODE_RESUME:
-+ /* Make sure we don't trigger an alarm before we get
-+ * around to reprogramming it.
-+ */
-+ ast_wait_ready();
-+ ast_writel(ast_regs, AR0, ast_readl(ast_regs, CV) - 1);
-+ ast_wait_ready();
-+ ast_writel(ast_regs, SCR, AST_BIT(ALARM0));
-+ ast_wait_ready();
-+ ast_writel(ast_regs, IER, AST_BIT(ALARM0));
-+ break;
-+ case CLOCK_EVT_MODE_UNUSED:
-+ case CLOCK_EVT_MODE_SHUTDOWN:
-+ ast_writel(ast_regs, IDR, AST_BIT(ALARM0));
-+ break;
-+ default:
-+ BUG();
-+ }
-+}
-+
-+static struct clock_event_device ast_clkevt = {
-+ .name = "ast",
-+ .features = CLOCK_EVT_FEAT_ONESHOT,
-+ .shift = 16,
-+ .rating = 400,
-+ .cpumask = CPU_MASK_CPU0,
-+ .set_next_event = ast_next_event,
-+ .set_mode = ast_mode,
-+};
-+
-+void __init ast_time_init(struct platform_device *pdev, unsigned int clksel)
-+{
-+ struct clk *clk, *pclk;
-+ struct resource *regs;
-+ unsigned long ast_hz;
-+ int irq;
-+ int ret;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ pr_debug("AST: No MMIO resource\n");
-+ return;
-+ }
-+
-+ pclk = clk_get(&pdev->dev, "pclk");
-+ if (!pclk) {
-+ pr_debug("AST: No peripheral clock (pclk)\n");
-+ return;
-+ }
-+ clk_enable(pclk);
-+
-+ /* Too early for ioremap() */
-+ ast_regs = (void __iomem __force *)regs->start;
-+
-+ switch (clksel) {
-+ case AST_CLOCK_SLOW:
-+ clk = clk_get(NULL, "rcosc");
-+ break;
-+ case AST_CLOCK_OSC32:
-+ clk = clk_get(NULL, "osc32");
-+ break;
-+ case AST_CLOCK_PB:
-+ clk = pclk;
-+ break;
-+ case AST_CLOCK_GC:
-+ clk = clk_get(&pdev->dev, "gclk");
-+ break;
-+ default:
-+ clk = NULL;
-+ break;
-+ }
-+
-+ if (!clk) {
-+ pr_debug("AST: clock %u invalid, using pb clock\n", clksel);
-+ clk = pclk;
-+ }
-+ clk_enable(clk);
-+
-+ ast_writel(ast_regs, CLOCK,
-+ AST_BF(CLOCK_CSSEL, clksel) | AST_BIT(CLOCK_CEN));
-+ ast_writel(ast_regs, CR, AST_BIT(CR_EN) | AST_BIT(CR_PCLR));
-+
-+ /* Using hardcoded divide-by-two prescaler */
-+ ast_hz = clk_get_rate(clk) / 2;
-+ ast_clksrc.mult = clocksource_hz2mult(ast_hz, ast_clksrc.shift);
-+
-+ ret = clocksource_register(&ast_clksrc);
-+ if (ret)
-+ pr_debug("AST: could not register clocksource: %d\n", ret);
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ pr_debug("AST: No IRQ resource, won't setup clockevent\n");
-+ return;
-+ }
-+
-+ ast_clkevt.mult = div_sc(ast_hz, NSEC_PER_SEC, ast_clkevt.shift);
-+ ast_clkevt.max_delta_ns = clockevent_delta2ns((u32)~0U, &ast_clkevt);
-+ ast_clkevt.min_delta_ns = clockevent_delta2ns(2, &ast_clkevt) + 100;
-+
-+ ast_clkevt_irqaction.dev_id = &ast_clkevt;
-+
-+ ret = setup_irq(irq, &ast_clkevt_irqaction);
-+ if (ret) {
-+ pr_debug("AST: Could not request IRQ %d: %d\n", irq, ret);
-+ return;
-+ }
-+
-+ clockevents_register_device(&ast_clkevt);
-+
-+ pr_info("Using Asynchronous Timer %d @ %lu.%03lu Mhz"
-+ " (regs 0x%p, irq %d)\n",
-+ pdev->id, ((ast_hz + 500) / 1000) / 1000,
-+ ((ast_hz + 500) / 1000) % 1000, ast_regs, irq);
-+}
-diff --git a/arch/avr32/mm/tlb.c b/arch/avr32/mm/tlb.c
-index 06677be..cede41b 100644
---- a/arch/avr32/mm/tlb.c
-+++ b/arch/avr32/mm/tlb.c
-@@ -12,7 +12,13 @@
- #include <asm/mmu_context.h>
-
- /* TODO: Get the correct number from the CONFIG1 system register */
--#define NR_TLB_ENTRIES 32
-+#if defined(CONFIG_CPU_AT32AP700X)
-+# define NR_TLB_ENTRIES 32
-+#elif defined(CONFIG_CPU_AT32AP720X)
-+# define NR_TLB_ENTRIES 64
-+#else
-+# error Unknown CPU type
-+#endif
-
- static void show_dtlb_entry(unsigned int index)
- {
-@@ -85,9 +91,15 @@ static void update_dtlb(unsigned long address, pte_t pte)
- u32 tlbar = sysreg_read(TLBARLO);
-
- rp = 32 - fls(tlbar);
-- if (rp == 32) {
-+ if (NR_TLB_ENTRIES > 32 && rp >= 32) {
-+ tlbar = sysreg_read(TLBARHI);
-+ rp = 64 - fls(tlbar);
-+ }
-+ if (rp >= NR_TLB_ENTRIES) {
- rp = 0;
- sysreg_write(TLBARLO, -1L);
-+ if (NR_TLB_ENTRIES > 32)
-+ sysreg_write(TLBARHI, -1L);
- }
-
- mmucr = SYSREG_BFINS(DRP, rp, mmucr);
-@@ -131,16 +143,22 @@ static void __flush_tlb_page(unsigned long asid, unsigned long page)
-
- if (!(mmucr & SYSREG_BIT(MMUCR_N))) {
- unsigned int entry;
-- u32 tlbarlo;
-+ u32 tlbarlo, tlbarhi;
-
- /* Clear the "valid" bit */
- sysreg_write(TLBEHI, tlbehi);
-
- /* mark the entry as "not accessed" */
- entry = SYSREG_BFEXT(DRP, mmucr);
-- tlbarlo = sysreg_read(TLBARLO);
-- tlbarlo |= (0x80000000UL >> entry);
-- sysreg_write(TLBARLO, tlbarlo);
-+ if (NR_TLB_ENTRIES > 32 && entry > 32) {
-+ tlbarhi = sysreg_read(TLBARHI);
-+ tlbarhi |= (0x80000000UL >> (entry - 32));
-+ sysreg_write(TLBARHI, tlbarhi);
-+ } else {
-+ tlbarlo = sysreg_read(TLBARLO);
-+ tlbarlo |= (0x80000000UL >> entry);
-+ sysreg_write(TLBARLO, tlbarlo);
-+ }
-
- /* update the entry with valid bit clear */
- __builtin_tlbw();
-@@ -179,9 +197,10 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long flags;
- int size;
-
-- local_irq_save(flags);
- size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
-
-+ local_irq_save(flags);
-+
- if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
- mm->context = NO_CONTEXT;
- if (mm == current->mm)
-diff --git a/arch/avr32/oprofile/Makefile b/arch/avr32/oprofile/Makefile
-index 1fe81c3..e0eb520 100644
---- a/arch/avr32/oprofile/Makefile
-+++ b/arch/avr32/oprofile/Makefile
-@@ -5,4 +5,4 @@ oprofile-y := $(addprefix ../../../drivers/oprofile/, \
- event_buffer.o oprofile_files.o \
- oprofilefs.o oprofile_stats.o \
- timer_int.o)
--oprofile-y += op_model_avr32.o
-+oprofile-y += op_model_avr32.o backtrace.o
-diff --git a/arch/avr32/oprofile/backtrace.c b/arch/avr32/oprofile/backtrace.c
-new file mode 100644
-index 0000000..75d9ad6
---- /dev/null
-+++ b/arch/avr32/oprofile/backtrace.c
-@@ -0,0 +1,81 @@
-+/*
-+ * AVR32 specific backtracing code for oprofile
-+ *
-+ * Copyright 2008 Weinmann GmbH
-+ *
-+ * Author: Nikolaus Voss <n.voss@weinmann.de>
-+ *
-+ * Based on i386 oprofile backtrace code by John Levon and David Smith
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/oprofile.h>
-+#include <linux/sched.h>
-+#include <linux/uaccess.h>
-+
-+/* The first two words of each frame on the stack look like this if we have
-+ * frame pointers */
-+struct frame_head {
-+ unsigned long lr;
-+ struct frame_head *fp;
-+};
-+
-+/* copied from arch/avr32/kernel/process.c */
-+static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p)
-+{
-+ return (p > (unsigned long)tinfo)
-+ && (p < (unsigned long)tinfo + THREAD_SIZE - 3);
-+}
-+
-+/* copied from arch/x86/oprofile/backtrace.c */
-+static struct frame_head *dump_user_backtrace(struct frame_head *head)
-+{
-+ struct frame_head bufhead[2];
-+
-+ /* Also check accessibility of one struct frame_head beyond */
-+ if (!access_ok(VERIFY_READ, head, sizeof(bufhead)))
-+ return NULL;
-+ if (__copy_from_user_inatomic(bufhead, head, sizeof(bufhead)))
-+ return NULL;
-+
-+ oprofile_add_trace(bufhead[0].lr);
-+
-+ /* frame pointers should strictly progress back up the stack
-+ * (towards higher addresses) */
-+ if (bufhead[0].fp <= head)
-+ return NULL;
-+
-+ return bufhead[0].fp;
-+}
-+
-+void avr32_backtrace(struct pt_regs * const regs, unsigned int depth)
-+{
-+ /* Get first frame pointer */
-+ struct frame_head *head = (struct frame_head *)(regs->r7);
-+
-+ if (!user_mode(regs)) {
-+#ifdef CONFIG_FRAME_POINTER
-+ /*
-+ * Traverse the kernel stack from frame to frame up to
-+ * "depth" steps.
-+ */
-+ while (depth-- && valid_stack_ptr(task_thread_info(current),
-+ (unsigned long)head)) {
-+ oprofile_add_trace(head->lr);
-+ if (head->fp <= head)
-+ break;
-+ head = head->fp;
-+ }
-+#endif
-+ } else {
-+ /* Assume we have frame pointers in user mode process */
-+ while (depth-- && head)
-+ head = dump_user_backtrace(head);
-+ }
-+}
-+
-+
-diff --git a/arch/avr32/oprofile/op_model_avr32.c b/arch/avr32/oprofile/op_model_avr32.c
-index df42325..a3e9b3c 100644
---- a/arch/avr32/oprofile/op_model_avr32.c
-+++ b/arch/avr32/oprofile/op_model_avr32.c
-@@ -22,6 +22,8 @@
- #define AVR32_PERFCTR_IRQ_GROUP 0
- #define AVR32_PERFCTR_IRQ_LINE 1
-
-+void avr32_backtrace(struct pt_regs * const regs, unsigned int depth);
-+
- enum { PCCNT, PCNT0, PCNT1, NR_counter };
-
- struct avr32_perf_counter {
-@@ -223,6 +225,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
- memcpy(ops, &avr32_perf_counter_ops,
- sizeof(struct oprofile_operations));
-
-+ ops->backtrace = avr32_backtrace;
-+
- printk(KERN_INFO "oprofile: using AVR32 performance monitoring.\n");
-
- return 0;
-diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
-index cd30390..9322b91 100644
---- a/drivers/dma/Kconfig
-+++ b/drivers/dma/Kconfig
-@@ -38,6 +38,20 @@ config INTEL_IOP_ADMA
- help
- Enable support for the Intel(R) IOP Series RAID engines.
-
-+config ATMEL_PDCA
-+ tristate "Atmel Peripheral DMA Controller A support"
-+ depends on AVR32
-+ select DMA_ENGINE
-+ default y if CPU_AT32AP7200
-+ help
-+ Support the Atmel Peripheral DMA Controller found on AVR32
-+ UC3 chips as well as newer AP7 chips. This controller is
-+ similar to the PDC found on AT32AP7000 and various AT91
-+ chips, but has its own register bank.
-+
-+ This controller only supports peripheral (slave) transfers,
-+ not memory-to-memory transfers.
-+
- config DW_DMAC
- tristate "Synopsys DesignWare AHB DMA support"
- depends on AVR32
-diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
-index 14f5952..1623a6d 100644
---- a/drivers/dma/Makefile
-+++ b/drivers/dma/Makefile
-@@ -4,6 +4,7 @@ obj-$(CONFIG_DMATEST) += dmatest.o
- obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o
- ioatdma-objs := ioat.o ioat_dma.o ioat_dca.o
- obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
-+obj-$(CONFIG_ATMEL_PDCA) += atmel_pdca.o
- obj-$(CONFIG_FSL_DMA) += fsldma.o
- obj-$(CONFIG_MV_XOR) += mv_xor.o
- obj-$(CONFIG_DW_DMAC) += dw_dmac.o
-diff --git a/drivers/dma/atmel_pdca.c b/drivers/dma/atmel_pdca.c
-new file mode 100644
-index 0000000..0d2f49f
---- /dev/null
-+++ b/drivers/dma/atmel_pdca.c
-@@ -0,0 +1,668 @@
-+/*
-+ * Driver for the Atmel PDCA Peripheral DMA Controller
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#define DEBUG
-+#include <linux/atmel_pdca.h>
-+#include <linux/clk.h>
-+#include <linux/dmaengine.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/list.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/scatterlist.h>
-+#include <linux/spinlock.h>
-+
-+/*
-+ * Since each descriptor can hold a whole scatterlist, we don't need
-+ * many of them.
-+ */
-+#define NR_DESCS_PER_CHANNEL 8
-+
-+static struct pdca_desc *pdca_desc_entry(struct list_head *node)
-+{
-+ return list_entry(node, struct pdca_desc, desc_node);
-+}
-+
-+static struct pdca_desc *pdca_next_desc(struct pdca_chan *pch,
-+ struct pdca_desc *desc)
-+{
-+ if (desc->desc_node.next != &pch->queue)
-+ return pdca_desc_entry(desc->desc_node.next);
-+ return NULL;
-+}
-+
-+static struct pdca_desc *pdca_desc_get(struct pdca_chan *pch)
-+{
-+ struct pdca_desc *desc = NULL;
-+
-+ spin_lock_bh(&pch->lock);
-+ if (likely(!list_empty(&pch->freelist))) {
-+ desc = pdca_desc_entry(pch->freelist.next);
-+ list_del(&desc->desc_node);
-+ }
-+ spin_unlock_bh(&pch->lock);
-+
-+ return desc;
-+}
-+
-+static dma_cookie_t pdca_assign_cookie(struct pdca_chan *pch,
-+ struct pdca_desc *desc)
-+{
-+ dma_cookie_t cookie = pch->chan.cookie;
-+
-+ if (++cookie < 0)
-+ cookie = 1;
-+
-+ pch->chan.cookie = cookie;
-+ desc->txd.cookie = cookie;
-+
-+ return cookie;
-+}
-+
-+static void pdca_desc_done(struct pdca_chan *pch, struct pdca_desc *desc)
-+{
-+ struct dma_async_tx_descriptor *txd = &desc->txd;
-+ dma_async_tx_callback callback;
-+ void *param;
-+
-+ pch->completed = txd->cookie;
-+ callback = txd->callback;
-+ param = txd->callback_param;
-+
-+ dev_vdbg(&pch->chan.dev, " completed %u\n", txd->cookie);
-+
-+ /*
-+ * We can only handle scatterlists, so this is easy. No other
-+ * drivers do the right thing with scatterlists though...
-+ *
-+ * Note that we ensure that at least one of these flags are
-+ * set when the descriptor is prepared, as we never need to
-+ * unmap the peripheral side.
-+ */
-+ if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP))
-+ dma_unmap_sg(pch->chan.dev.parent, desc->sg, desc->sg_len,
-+ DMA_FROM_DEVICE);
-+ if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP))
-+ dma_unmap_sg(pch->chan.dev.parent, desc->sg, desc->sg_len,
-+ DMA_TO_DEVICE);
-+
-+ list_move(&desc->desc_node, &pch->freelist);
-+
-+ if (callback)
-+ callback(param);
-+}
-+
-+static void pdca_chan_tasklet(unsigned long param)
-+{
-+ struct pdca_chan *pch = (struct pdca_chan *)param;
-+ void __iomem *regs = pch->regs;
-+ struct pdca_desc *cur;
-+ struct pdca_desc *next;
-+ struct scatterlist *cur_sg;
-+ struct scatterlist *next_sg;
-+ u32 intflags;
-+ u32 status;
-+
-+ spin_lock(&pch->lock);
-+
-+ cur = pdca_desc_entry(pch->queue.next);
-+ next = pdca_next_desc(pch, cur);
-+
-+ cur_sg = pch->cur_sg;
-+ next_sg = pch->next_sg;
-+
-+ intflags = PDCA_TERR | PDCA_TRC | PDCA_RCZ;
-+
-+ status = pdca_readl(regs, ISR);
-+ dev_vdbg(&pch->chan.dev, "tasklet: status=%08x\n", status);
-+
-+ if (status & PDCA_TRC) {
-+ if (cur_sg) {
-+ if (sg_is_last(cur_sg)) {
-+ dev_vdbg(&pch->chan.dev,
-+ " cur sg was last in %u\n",
-+ cur->txd.cookie);
-+ pdca_desc_done(pch, cur);
-+ cur = next;
-+ next = NULL;
-+ }
-+ if (next_sg && sg_is_last(next_sg)) {
-+ dev_vdbg(&pch->chan.dev,
-+ " next sg was last in %u\n",
-+ cur->txd.cookie);
-+ pdca_desc_done(pch, cur);
-+ cur = next;
-+ next = NULL;
-+ }
-+ if (!cur) {
-+ dev_vdbg(&pch->chan.dev, " all done\n");
-+ pdca_writel(regs, CR, PDCA_CR_TDIS);
-+ cur_sg = next_sg = NULL;
-+ intflags = 0;
-+ goto done;
-+ }
-+ cur_sg = next_sg ? sg_next(next_sg) : NULL;
-+ }
-+
-+ if (!cur_sg) {
-+ dev_vdbg(&pch->chan.dev, " load sg from %u\n",
-+ cur->txd.cookie);
-+ cur_sg = cur->sg;
-+ pdca_writel(regs, PSR, cur->periph_id);
-+ pdca_writel(regs, MR, cur->reg_width);
-+ }
-+ dev_vdbg(&pch->chan.dev, " START: %08x count: %08x\n",
-+ sg_dma_address(cur_sg),
-+ sg_dma_len(cur_sg) >> cur->reg_width);
-+ pdca_writel(regs, MAR, sg_dma_address(cur_sg));
-+ pdca_writel(regs, TCR, sg_dma_len(cur_sg) >> cur->reg_width);
-+
-+ next_sg = sg_next(cur_sg);
-+ if (!next_sg) {
-+ next = pdca_next_desc(pch, cur);
-+ if (next && next->reg_width == cur->reg_width
-+ && next->periph_id == cur->periph_id) {
-+ dev_vdbg(&pch->chan.dev,
-+ "loading next_sg from %u\n",
-+ next->txd.cookie);
-+ next_sg = next->sg;
-+ }
-+ }
-+ if (next_sg) {
-+ dev_vdbg(&pch->chan.dev, " NEXT: %08x count: %08x\n",
-+ sg_dma_address(next_sg),
-+ sg_dma_len(next_sg) >> cur->reg_width);
-+ pdca_writel(regs, MARR, sg_dma_address(next_sg));
-+ pdca_writel(regs, TCRR,
-+ sg_dma_len(next_sg) >> cur->reg_width);
-+ } else {
-+ intflags &= ~PDCA_RCZ;
-+ }
-+ } else if (next_sg && (status & PDCA_RCZ)) {
-+ if (sg_is_last(cur_sg)) {
-+ dev_vdbg(&pch->chan.dev, " cur sg was last in %u\n",
-+ cur->txd.cookie);
-+ next = pdca_next_desc(pch, cur);
-+ pdca_desc_done(pch, cur);
-+ cur = next;
-+ next = NULL;
-+ }
-+
-+ cur_sg = next_sg;
-+ next_sg = sg_next(cur_sg);
-+ if (!next_sg) {
-+ next = pdca_next_desc(pch, cur);
-+ if (next && next->reg_width == cur->reg_width
-+ && next->periph_id == cur->periph_id)
-+ next_sg = next->sg;
-+ }
-+
-+ if (next_sg) {
-+ dev_vdbg(&pch->chan.dev, " NEXT: %08x count: %08x\n",
-+ sg_dma_address(next_sg),
-+ sg_dma_len(next_sg) >> cur->reg_width);
-+ pdca_writel(regs, MARR, sg_dma_address(next_sg));
-+ pdca_writel(regs, TCRR,
-+ sg_dma_len(next_sg) >> cur->reg_width);
-+ } else {
-+ dev_vdbg(&pch->chan.dev, " no next sg\n");
-+ intflags &= ~PDCA_RCZ;
-+ }
-+ }
-+
-+done:
-+ if (status & PDCA_TERR) {
-+ /*
-+ * Head of queue is busted. We must remove it, clear
-+ * the error and restart the queue.
-+ */
-+ pdca_writel(regs, TCRR, 0);
-+ pdca_writel(regs, TCR, 0);
-+ pdca_writel(regs, CR, PDCA_CR_ECLR);
-+ cur_sg = next_sg = NULL;
-+
-+ if (!cur)
-+ dev_err(&pch->chan.dev,
-+ "Transfer Error with empty queue\n");
-+ else {
-+ dev_vdbg(&pch->chan.dev,
-+ " %u is busted\n", cur->txd.cookie);
-+ pdca_desc_done(pch, cur);
-+ }
-+
-+ if (list_empty(&pch->queue)) {
-+ pdca_writel(regs, CR, PDCA_CR_TDIS);
-+ intflags = 0;
-+ }
-+ }
-+
-+ pch->cur_sg = cur_sg;
-+ pch->next_sg = next_sg;
-+
-+ dev_vdbg(&pch->chan.dev, " enabling interrupts: %08x\n", intflags);
-+ pdca_writel(regs, IER, intflags);
-+ pdca_readl(regs, SR);
-+
-+ spin_unlock(&pch->lock);
-+}
-+
-+static irqreturn_t pdca_interrupt(int irq, void *dev_id)
-+{
-+ struct pdca_dev *pdca = dev_id;
-+ struct pdca_chan *pch;
-+ void __iomem *regs;
-+ unsigned long pending;
-+ unsigned int chan;
-+
-+ pending = intc_get_pending(irq);
-+ if (unlikely(!pending))
-+ return IRQ_NONE;
-+
-+ do {
-+ chan = __ffs(pending);
-+ pch = &pdca->chan[chan];
-+ regs = pch->regs;
-+ pdca_writel(regs, IDR, ~0UL);
-+ tasklet_schedule(&pch->tasklet);
-+ pdca_readl(regs, IMR);
-+ pending &= ~(1 << chan);
-+ } while (pending);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static dma_cookie_t pdca_tx_submit(struct dma_async_tx_descriptor *txd)
-+{
-+ struct pdca_desc *desc = txd_to_pdca_desc(txd);
-+ struct pdca_chan *pch = dma_to_pdca_chan(txd->chan);
-+ void __iomem *regs = pch->regs;
-+ dma_cookie_t cookie;
-+
-+ spin_lock_bh(&pch->lock);
-+ cookie = pdca_assign_cookie(pch, desc);
-+ dev_vdbg(&pch->chan.dev, "submitted %u\n", cookie);
-+ list_add_tail(&desc->desc_node, &pch->queue);
-+ pdca_writel(regs, CR, PDCA_CR_TEN);
-+ pdca_writel(regs, IER, PDCA_TERR | PDCA_RCZ);
-+ /* The tasklet will kickstart the queue if necessary */
-+ spin_unlock_bh(&pch->lock);
-+
-+ return cookie;
-+}
-+
-+static struct dma_async_tx_descriptor *pdca_prep_slave_sg(struct dma_chan *chan,
-+ struct scatterlist *sgl, unsigned int sg_len,
-+ enum dma_data_direction direction, unsigned long flags)
-+{
-+ struct pdca_chan *pch = dma_to_pdca_chan(chan);
-+ struct pdca_slave *pslave = pch->pslave;
-+ struct pdca_desc *desc;
-+ unsigned int periph_id;
-+
-+ dev_vdbg(&chan->dev, "prep_dma_slave: %s %u segments, flags: %lx\n",
-+ direction == DMA_TO_DEVICE ? "OUT" : "IN",
-+ sg_len, flags);
-+
-+ switch (direction) {
-+ case DMA_TO_DEVICE:
-+ periph_id = pslave->tx_periph_id;
-+ flags |= DMA_COMPL_SKIP_DEST_UNMAP;
-+ break;
-+ case DMA_FROM_DEVICE:
-+ periph_id = pslave->rx_periph_id;
-+ flags |= DMA_COMPL_SKIP_SRC_UNMAP;
-+ break;
-+ default:
-+ return NULL;
-+ }
-+
-+ desc = pdca_desc_get(pch);
-+ if (!desc) {
-+ dev_err(&chan->dev,
-+ "not enough descriptors available\n");
-+ return NULL;
-+ }
-+ desc->sg = sgl;
-+ desc->sg_len = sg_len;
-+ desc->periph_id = periph_id;
-+ desc->reg_width = pslave->slave.reg_width;
-+ desc->txd.flags = flags;
-+
-+ return &desc->txd;
-+}
-+
-+static void pdca_terminate_all(struct dma_chan *chan)
-+{
-+ struct pdca_chan *pch = dma_to_pdca_chan(chan);
-+ struct pdca_desc *desc, *_desc;
-+ void __iomem *regs = pch->regs;
-+
-+ spin_lock_bh(&pch->lock);
-+ pdca_writel(regs, CR, PDCA_CR_TDIS);
-+ pdca_writel(regs, TCRR, 0);
-+ pdca_writel(regs, TCR, 0);
-+ while (pdca_readl(regs, SR) & PDCA_SR_TEN)
-+ cpu_relax();
-+
-+ list_for_each_entry_safe(desc, _desc, &pch->queue, desc_node)
-+ pdca_desc_done(pch, desc);
-+ spin_unlock_bh(&pch->lock);
-+}
-+
-+static enum dma_status pdca_is_tx_complete(struct dma_chan *chan,
-+ dma_cookie_t cookie, dma_cookie_t *done, dma_cookie_t *used)
-+{
-+ struct pdca_chan *pch = dma_to_pdca_chan(chan);
-+ dma_cookie_t last_used;
-+ dma_cookie_t last_complete;
-+
-+ last_complete = pch->completed;
-+ last_used = chan->cookie;
-+
-+ if (done)
-+ *done = last_complete;
-+ if (used)
-+ *used = last_used;
-+
-+ return dma_async_is_complete(cookie, last_complete, last_used);
-+}
-+
-+static void pdca_issue_pending(struct dma_chan *chan)
-+{
-+ /* We always issue descriptors ASAP */
-+}
-+
-+static int pdca_alloc_chan_resources(struct dma_chan *chan,
-+ struct dma_client *client)
-+{
-+ struct pdca_chan *pch = dma_to_pdca_chan(chan);
-+ struct pdca_dev *pdca = dma_to_pdca_dev(chan->device);
-+ struct dma_slave *slave = client->slave;
-+ void __iomem *regs = pch->regs;
-+
-+ /*
-+ * Channels doing slave DMA can only handle one client. This
-+ * controller can only do slave DMA.
-+ */
-+ if (chan->client_count)
-+ return -EBUSY;
-+ if (!slave || !slave->dma_dev || slave->dma_dev != pdca->dma.dev)
-+ return -EINVAL;
-+
-+ if (pdca_readl(regs, SR) & PDCA_SR_TEN)
-+ dev_err(&chan->dev, "DMA channel not idle!\n");
-+
-+ /*
-+ * We may get called multiple times if a client rejects the
-+ * channel...
-+ */
-+ if (!pch->enabled) {
-+ pch->enabled = true;
-+ clk_enable(pdca->pclk);
-+ clk_enable(pdca->hclk);
-+ }
-+
-+ pch->chan.cookie = pch->completed = 1;
-+ pch->pslave = dma_to_pdca_slave(slave);
-+
-+ while (pch->descs_allocated < NR_DESCS_PER_CHANNEL) {
-+ struct pdca_desc *desc;
-+
-+ desc = kzalloc(sizeof(struct pdca_desc), GFP_KERNEL);
-+ if (!desc) {
-+ dev_info(&chan->dev, "only allocated %d descriptors\n",
-+ pch->descs_allocated);
-+ break;
-+ }
-+
-+ dma_async_tx_descriptor_init(&desc->txd, chan);
-+ desc->txd.tx_submit = pdca_tx_submit;
-+ desc->txd.flags = DMA_CTRL_ACK;
-+ INIT_LIST_HEAD(&desc->txd.tx_list);
-+ list_add(&desc->desc_node, &pch->freelist);
-+ pch->descs_allocated++;
-+ }
-+
-+ return pch->descs_allocated ? 0 : -ENOMEM;
-+}
-+
-+static void pdca_free_chan_resources(struct dma_chan *chan)
-+{
-+ struct pdca_chan *pch = dma_to_pdca_chan(chan);
-+ struct pdca_dev *pdca = dma_to_pdca_dev(chan->device);
-+ struct pdca_desc *desc, *_desc;
-+
-+ WARN_ON(!list_empty(&pch->queue));
-+ WARN_ON(pdca_readl(pch->regs, SR) & PDCA_SR_TEN);
-+ WARN_ON(pdca_readl(pch->regs, IMR));
-+
-+ clk_disable(pdca->hclk);
-+ clk_disable(pdca->pclk);
-+ pch->enabled = false;
-+
-+ list_for_each_entry_safe(desc, _desc, &pch->freelist, desc_node) {
-+ list_del(&desc->desc_node);
-+ kfree(desc);
-+ }
-+
-+ pch->descs_allocated = 0;
-+}
-+
-+static void pdca_suspend_channel(struct pdca_dev *pdca, struct pdca_chan *pch)
-+{
-+ void __iomem *regs = pch->regs;
-+
-+ /*
-+ * REVISIT this whole business.
-+ *
-+ * The plan is to ensure that the PDCA doesn't do any bus
-+ * transactions when we're suspended or shut down. Ideally,
-+ * the client should make sure that all transfers have already
-+ * been completed or terminated when we reach suspend_late(),
-+ * but just in case that didn't happen, we should just stop
-+ * the controller and turn it back on when resuming. Hopefully
-+ * it will simply continue where it left off.
-+ *
-+ * We _probably_ need to save some sort of state to make this
-+ * happen. Or we can just rely on interrupts being globally
-+ * disabled at least until we reach resume_early. But that
-+ * might not be the case for shutdown.
-+ */
-+ tasklet_kill(&pch->tasklet);
-+ spin_lock_bh(&pch->lock);
-+ if (pdca_readl(regs, SR) & PDCA_SR_TEN) {
-+ pdca_writel(regs, CR, PDCA_CR_TDIS);
-+ while (pdca_readl(regs, SR) & PDCA_SR_TEN)
-+ cpu_relax();
-+
-+ clk_disable(pdca->hclk);
-+ clk_disable(pdca->pclk);
-+ }
-+ spin_unlock_bh(&pch->lock);
-+}
-+
-+static void __init pdca_init_channel(struct pdca_dev *pdca, unsigned int i)
-+{
-+ struct pdca_chan *pch = &pdca->chan[i];
-+
-+ pch->chan.device = &pdca->dma;
-+ pch->chan.chan_id = i;
-+ pch->regs = pdca->regs + i * PDCA_CHAN_SIZE;
-+ tasklet_init(&pch->tasklet, pdca_chan_tasklet, (unsigned long)pch);
-+ spin_lock_init(&pch->lock);
-+ INIT_LIST_HEAD(&pch->freelist);
-+ INIT_LIST_HEAD(&pch->queue);
-+
-+ list_add_tail(&pch->chan.device_node, &pdca->dma.channels);
-+}
-+
-+static int __init pdca_probe(struct platform_device *pdev)
-+{
-+ struct pdca_pdata *pdata;
-+ struct resource *mmio;
-+ struct pdca_dev *pdca;
-+ size_t mmio_len;
-+ size_t size;
-+ unsigned int i;
-+ int irq;
-+ int ret;
-+
-+ pdata = pdev->dev.platform_data;
-+ mmio = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ irq = platform_get_irq(pdev, 0);
-+ if (!pdata || pdata->nr_channels > 32 || !mmio || !irq) {
-+ dev_dbg(&pdev->dev, "invalid params from platform code\n");
-+ return -EINVAL;
-+ }
-+
-+ mmio_len = mmio->end - mmio->start + 1;
-+ if (!request_mem_region(mmio->start, mmio_len, "atmel_pdca")) {
-+ dev_dbg(&pdev->dev, "mmio resource busy\n");
-+ return -EBUSY;
-+ }
-+
-+ size = sizeof(struct pdca_dev);
-+ size += pdata->nr_channels * sizeof(struct pdca_chan);
-+ pdca = kzalloc(size, GFP_KERNEL);
-+ if (!pdca) {
-+ dev_dbg(&pdev->dev, "insufficient memory\n");
-+ ret = -ENOMEM;
-+ goto err_alloc_pdca;
-+ }
-+
-+ pdca->hclk = clk_get(&pdev->dev, "hclk");
-+ if (IS_ERR(pdca->hclk)) {
-+ dev_dbg(&pdev->dev, "no HSB clock\n");
-+ ret = PTR_ERR(pdca->hclk);
-+ goto err_get_hclk;
-+ }
-+ pdca->pclk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(pdca->pclk)) {
-+ dev_dbg(&pdev->dev, "no PB clock\n");
-+ ret = PTR_ERR(pdca->pclk);
-+ goto err_get_pclk;
-+ }
-+
-+ pdca->regs = ioremap(mmio->start, mmio_len);
-+ if (!pdca->regs) {
-+ dev_dbg(&pdev->dev, "ioremap failed\n");
-+ ret = -ENOMEM;
-+ goto err_ioremap;
-+ }
-+
-+ INIT_LIST_HEAD(&pdca->dma.channels);
-+ for (i = 0; i < pdata->nr_channels; i++, pdca->dma.chancnt++)
-+ pdca_init_channel(pdca, i);
-+
-+ ret = request_irq(irq, pdca_interrupt, 0, pdev->dev.bus_id, pdca);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "request_irq failed\n");
-+ goto err_irq;
-+ }
-+
-+ dma_cap_set(DMA_SLAVE, pdca->dma.cap_mask);
-+ pdca->dma.dev = &pdev->dev;
-+ pdca->dma.device_alloc_chan_resources = pdca_alloc_chan_resources;
-+ pdca->dma.device_free_chan_resources = pdca_free_chan_resources;
-+ pdca->dma.device_prep_slave_sg = pdca_prep_slave_sg;
-+ pdca->dma.device_terminate_all = pdca_terminate_all;
-+ pdca->dma.device_is_tx_complete = pdca_is_tx_complete;
-+ pdca->dma.device_issue_pending = pdca_issue_pending;
-+
-+ platform_set_drvdata(pdev, pdca);
-+ dma_async_device_register(&pdca->dma);
-+
-+ dev_info(&pdev->dev, "Atmel PDCA at 0x%08lx (irq %d) %u channels\n",
-+ (unsigned long)mmio->start, irq, pdca->dma.chancnt);
-+
-+ return 0;
-+
-+err_irq:
-+ iounmap(pdca->regs);
-+err_ioremap:
-+ clk_put(pdca->pclk);
-+err_get_pclk:
-+ clk_put(pdca->hclk);
-+err_get_hclk:
-+ kfree(pdca);
-+err_alloc_pdca:
-+ release_resource(mmio);
-+ return ret;
-+}
-+
-+static int __exit pdca_remove(struct platform_device *pdev)
-+{
-+ struct pdca_dev *pdca = platform_get_drvdata(pdev);
-+ struct pdca_chan *pch;
-+ struct resource *mmio;
-+
-+ list_for_each_entry(pch, &pdca->dma.channels, chan.device_node)
-+ pdca_suspend_channel(pdca, pch);
-+
-+ dma_async_device_unregister(&pdca->dma);
-+ free_irq(platform_get_irq(pdev, 0), pdca);
-+ clk_put(pdca->pclk);
-+ clk_put(pdca->hclk);
-+ iounmap(pdca->regs);
-+ kfree(pdca);
-+
-+ mmio = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ release_resource(mmio);
-+
-+ return 0;
-+}
-+
-+static void pdca_shutdown(struct platform_device *pdev)
-+{
-+ struct pdca_dev *pdca = platform_get_drvdata(pdev);
-+ struct pdca_chan *pch;
-+
-+ list_for_each_entry(pch, &pdca->dma.channels, chan.device_node)
-+ pdca_suspend_channel(pdca, pch);
-+}
-+
-+static int pdca_suspend_late(struct platform_device *pdev, pm_message_t state)
-+{
-+ return 0;
-+}
-+
-+static int pdca_resume_early(struct platform_device *pdev)
-+{
-+ return 0;
-+}
-+
-+static struct platform_driver pdca_driver = {
-+ .remove = __exit_p(pdca_remove),
-+ .shutdown = pdca_shutdown,
-+ .suspend_late = pdca_suspend_late,
-+ .resume_early = pdca_resume_early,
-+ .driver = {
-+ .name = "atmel_pdca",
-+ },
-+};
-+
-+static int __init pdca_init(void)
-+{
-+ return platform_driver_probe(&pdca_driver, pdca_probe);
-+}
-+subsys_initcall(pdca_init);
-+
-+static void __exit pdca_exit(void)
-+{
-+ platform_driver_unregister(&pdca_driver);
-+}
-+module_exit(pdca_exit);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("Atmel PDCA DMA Controller driver");
-+MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>");
-diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
-index 0778d99..a7686b9 100644
---- a/drivers/dma/dw_dmac.c
-+++ b/drivers/dma/dw_dmac.c
-@@ -545,109 +545,51 @@ err_desc_get:
- return NULL;
- }
-
--static struct dma_async_tx_descriptor *
--dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
-- unsigned int sg_len, enum dma_data_direction direction,
-- unsigned long flags)
-+static struct dw_desc *dwc_init_slave_descs(struct dw_dma_chan *dwc,
-+ struct scatterlist *sgl, unsigned int sg_len,
-+ u32 ctllo, dma_addr_t src_reg, dma_addr_t dst_reg,
-+ unsigned int reg_width, unsigned long flags)
- {
-- struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
-- struct dw_dma_slave *dws = dwc->dws;
-- struct dw_desc *prev;
-- struct dw_desc *first;
-- u32 ctllo;
-- dma_addr_t reg;
-- unsigned int reg_width;
-- unsigned int mem_width;
-- unsigned int i;
-+ struct dma_chan *chan = &dwc->chan;
- struct scatterlist *sg;
-+ struct dw_desc *desc;
-+ struct dw_desc *first = NULL;
-+ struct dw_desc *prev = NULL;
-+ unsigned int align_mask;
-+ unsigned int i;
- size_t total_len = 0;
-
-- dev_vdbg(&chan->dev, "prep_dma_slave\n");
--
-- if (unlikely(!dws || !sg_len))
-- return NULL;
--
-- reg_width = dws->slave.reg_width;
-- prev = first = NULL;
--
-- sg_len = dma_map_sg(chan->dev.parent, sgl, sg_len, direction);
-+ align_mask = (1 << reg_width) - 1;
-+ for_each_sg(sgl, sg, sg_len, i) {
-+ u32 len;
-+ u32 desc_len;
-+ u32 mem;
-
-- switch (direction) {
-- case DMA_TO_DEVICE:
-- ctllo = (DWC_DEFAULT_CTLLO
-- | DWC_CTLL_DST_WIDTH(reg_width)
-- | DWC_CTLL_DST_FIX
-- | DWC_CTLL_SRC_INC
-- | DWC_CTLL_FC_M2P);
-- reg = dws->slave.tx_reg;
-- for_each_sg(sgl, sg, sg_len, i) {
-- struct dw_desc *desc;
-- u32 len;
-- u32 mem;
-+ mem = sg_phys(sg);
-+ len = sg_dma_len(sg);
-+ total_len += len;
-
-+ while (len) {
-+ desc_len = min(len, DWC_MAX_COUNT << reg_width);
- desc = dwc_desc_get(dwc);
- if (!desc) {
- dev_err(&chan->dev,
- "not enough descriptors available\n");
- goto err_desc_get;
- }
-+ len -= desc_len;
-
-- mem = sg_phys(sg);
-- len = sg_dma_len(sg);
-- mem_width = 2;
-- if (unlikely(mem & 3 || len & 3))
-- mem_width = 0;
-+ if (unlikely((mem & align_mask) || (len & align_mask)))
-+ goto err_align;
-
-- desc->lli.sar = mem;
-- desc->lli.dar = reg;
-- desc->lli.ctllo = ctllo | DWC_CTLL_SRC_WIDTH(mem_width);
-- desc->lli.ctlhi = len >> mem_width;
--
-- if (!first) {
-- first = desc;
-- } else {
-- prev->lli.llp = desc->txd.phys;
-- dma_sync_single_for_device(chan->dev.parent,
-- prev->txd.phys,
-- sizeof(prev->lli),
-- DMA_TO_DEVICE);
-- list_add_tail(&desc->desc_node,
-- &first->txd.tx_list);
-- }
-- prev = desc;
-- total_len += len;
-- }
-- break;
-- case DMA_FROM_DEVICE:
-- ctllo = (DWC_DEFAULT_CTLLO
-- | DWC_CTLL_SRC_WIDTH(reg_width)
-- | DWC_CTLL_DST_INC
-- | DWC_CTLL_SRC_FIX
-- | DWC_CTLL_FC_P2M);
--
-- reg = dws->slave.rx_reg;
-- for_each_sg(sgl, sg, sg_len, i) {
-- struct dw_desc *desc;
-- u32 len;
-- u32 mem;
--
-- desc = dwc_desc_get(dwc);
-- if (!desc) {
-- dev_err(&chan->dev,
-- "not enough descriptors available\n");
-- goto err_desc_get;
-- }
--
-- mem = sg_phys(sg);
-- len = sg_dma_len(sg);
-- mem_width = 2;
-- if (unlikely(mem & 3 || len & 3))
-- mem_width = 0;
--
-- desc->lli.sar = reg;
-- desc->lli.dar = mem;
-- desc->lli.ctllo = ctllo | DWC_CTLL_DST_WIDTH(mem_width);
-- desc->lli.ctlhi = len >> reg_width;
-+ desc->lli.sar = src_reg ? src_reg : mem;
-+ desc->lli.dar = dst_reg ? dst_reg : mem;
-+ desc->lli.ctllo = ctllo;
-+ desc->lli.ctlhi = desc_len >> reg_width;
-+ dev_vdbg(&dwc->chan.dev,
-+ " s%08x d%08x c%08x:%08x\n",
-+ desc->lli.sar, desc->lli.dar,
-+ ctllo, desc_len >> reg_width);
-
- if (!first) {
- first = desc;
-@@ -661,11 +603,8 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
- &first->txd.tx_list);
- }
- prev = desc;
-- total_len += len;
-+ mem += desc_len;
- }
-- break;
-- default:
-- return NULL;
- }
-
- if (flags & DMA_PREP_INTERRUPT)
-@@ -679,13 +618,69 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
-
- first->len = total_len;
-
-- return &first->txd;
-+ return first;
-
-+err_align:
-+ dwc_desc_put(dwc, desc);
- err_desc_get:
- dwc_desc_put(dwc, first);
- return NULL;
- }
-
-+static struct dma_async_tx_descriptor *
-+dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
-+ unsigned int sg_len, enum dma_data_direction direction,
-+ unsigned long flags)
-+{
-+ struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
-+ struct dw_dma_slave *dws = dwc->dws;
-+ struct dw_desc *first;
-+ u32 ctllo;
-+ unsigned int reg_width;
-+
-+ dev_vdbg(&chan->dev, "prep_dma_slave: %s %u segments, flags: %lx\n",
-+ direction == DMA_TO_DEVICE ? "OUT" : "IN",
-+ sg_len, flags);
-+
-+ if (unlikely(!dws || !sg_len))
-+ return NULL;
-+
-+ reg_width = dws->slave.reg_width;
-+ sg_len = dma_map_sg(chan->dev.parent, sgl, sg_len, direction);
-+
-+ switch (direction) {
-+ case DMA_TO_DEVICE:
-+ ctllo = (DWC_DEFAULT_CTLLO
-+ | DWC_CTLL_DST_WIDTH(reg_width)
-+ | DWC_CTLL_SRC_WIDTH(reg_width)
-+ | DWC_CTLL_DST_FIX
-+ | DWC_CTLL_SRC_INC
-+ | DWC_CTLL_FC_M2P);
-+ first = dwc_init_slave_descs(dwc, sgl, sg_len, ctllo,
-+ 0, dws->slave.tx_reg, reg_width, flags);
-+ break;
-+ case DMA_FROM_DEVICE:
-+ ctllo = (DWC_DEFAULT_CTLLO
-+ | DWC_CTLL_SRC_WIDTH(reg_width)
-+ | DWC_CTLL_DST_WIDTH(reg_width)
-+ | DWC_CTLL_DST_INC
-+ | DWC_CTLL_SRC_FIX
-+ | DWC_CTLL_FC_P2M);
-+ first = dwc_init_slave_descs(dwc, sgl, sg_len, ctllo,
-+ dws->slave.rx_reg, 0, reg_width, flags);
-+ break;
-+ default:
-+ return NULL;
-+ }
-+
-+ if (unlikely(!first)) {
-+ dma_unmap_sg(chan->dev.parent, sgl, sg_len, direction);
-+ return NULL;
-+ }
-+
-+ return &first->txd;
-+}
-+
- static void dwc_terminate_all(struct dma_chan *chan)
- {
- struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
-@@ -1109,7 +1104,7 @@ static int __init dw_init(void)
- {
- return platform_driver_probe(&dw_driver, dw_probe);
- }
--module_init(dw_init);
-+subsys_initcall(dw_init);
-
- static void __exit dw_exit(void)
- {
-diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
-index ea8d7a3..1ce21d4 100644
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -114,6 +114,17 @@ config MMC_ATMELMCI
-
- If unsure, say N.
-
-+config MMC_ATMELMCI_DMA
-+ bool "Atmel MCI DMA support (EXPERIMENTAL)"
-+ depends on MMC_ATMELMCI && DMA_ENGINE && EXPERIMENTAL
-+ help
-+ Say Y here to have the Atmel MCI driver use a DMA engine to
-+ do data transfers and thus increase the throughput and
-+ reduce the CPU utilization. Note that this is highly
-+ experimental and may cause the driver to lock up.
-+
-+ If unsure, say N.
-+
- config MMC_IMX
- tristate "Motorola i.MX Multimedia Card Interface support"
- depends on ARCH_IMX
-diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
-index 26bd80e..cfb7ce1 100644
---- a/drivers/mmc/host/atmel-mci-regs.h
-+++ b/drivers/mmc/host/atmel-mci-regs.h
-@@ -10,13 +10,21 @@
- #ifndef __DRIVERS_MMC_ATMEL_MCI_H__
- #define __DRIVERS_MMC_ATMEL_MCI_H__
-
--/* MCI Register Definitions */
-+/*
-+ * MCI Register Definitions. Registers and bitfields marked with [2]
-+ * are only available in MCI2.
-+ */
- #define MCI_CR 0x0000 /* Control */
- # define MCI_CR_MCIEN ( 1 << 0) /* MCI Enable */
- # define MCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */
-+# define MCI_CR_PWSEN ( 1 << 2) /* Powersave Enable[2] */
-+# define MCI_CR_PWSDIS ( 1 << 3) /* Powersave Disable[2] */
-+# define MCI_CR_IOWAITEN ( 1 << 4) /* SDIO Read Wait Enable[2] */
-+# define MCI_CR_IOWAITDIS ( 1 << 5) /* SDIO Read Wait Disable[2] */
- # define MCI_CR_SWRST ( 1 << 7) /* Software Reset */
- #define MCI_MR 0x0004 /* Mode */
- # define MCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */
-+# define MCI_MR_PWSDIV(x) ((x) << 8) /* Powersave Divider[2] */
- # define MCI_MR_RDPROOF ( 1 << 11) /* Read Proof */
- # define MCI_MR_WRPROOF ( 1 << 12) /* Write Proof */
- #define MCI_DTOR 0x0008 /* Data Timeout */
-@@ -24,9 +32,12 @@
- # define MCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */
- #define MCI_SDCR 0x000c /* SD Card / SDIO */
- # define MCI_SDCSEL_SLOT_A ( 0 << 0) /* Select SD slot A */
--# define MCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot A */
--# define MCI_SDCBUS_1BIT ( 0 << 7) /* 1-bit data bus */
--# define MCI_SDCBUS_4BIT ( 1 << 7) /* 4-bit data bus */
-+# define MCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot B */
-+# define MCI_SDCSEL_MASK ( 3 << 0)
-+# define MCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */
-+# define MCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */
-+# define MCI_SDCBUS_8BIT ( 3 << 6) /* 8-bit data bus[2] */
-+# define MCI_SDCBUS_MASK ( 3 << 6)
- #define MCI_ARGR 0x0010 /* Command Argument */
- #define MCI_CMDR 0x0014 /* Command */
- # define MCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */
-@@ -54,6 +65,9 @@
- #define MCI_BLKR 0x0018 /* Block */
- # define MCI_BCNT(x) ((x) << 0) /* Data Block Count */
- # define MCI_BLKLEN(x) ((x) << 16) /* Data Block Length */
-+#define MCI_CSTOR 0x001c /* Completion Signal Timeout[2] */
-+# define MCI_CSTOCYC(x) ((x) << 0) /* CST cycles */
-+# define MCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */
- #define MCI_RSPR 0x0020 /* Response 0 */
- #define MCI_RSPR1 0x0024 /* Response 1 */
- #define MCI_RSPR2 0x0028 /* Response 2 */
-@@ -64,24 +78,45 @@
- #define MCI_IER 0x0044 /* Interrupt Enable */
- #define MCI_IDR 0x0048 /* Interrupt Disable */
- #define MCI_IMR 0x004c /* Interrupt Mask */
--# define MCI_CMDRDY ( 1 << 0) /* Command Ready */
--# define MCI_RXRDY ( 1 << 1) /* Receiver Ready */
--# define MCI_TXRDY ( 1 << 2) /* Transmitter Ready */
--# define MCI_BLKE ( 1 << 3) /* Data Block Ended */
--# define MCI_DTIP ( 1 << 4) /* Data Transfer In Progress */
--# define MCI_NOTBUSY ( 1 << 5) /* Data Not Busy */
--# define MCI_SDIOIRQA ( 1 << 8) /* SDIO IRQ in slot A */
--# define MCI_SDIOIRQB ( 1 << 9) /* SDIO IRQ in slot B */
--# define MCI_RINDE ( 1 << 16) /* Response Index Error */
--# define MCI_RDIRE ( 1 << 17) /* Response Direction Error */
--# define MCI_RCRCE ( 1 << 18) /* Response CRC Error */
--# define MCI_RENDE ( 1 << 19) /* Response End Bit Error */
--# define MCI_RTOE ( 1 << 20) /* Response Time-Out Error */
--# define MCI_DCRCE ( 1 << 21) /* Data CRC Error */
--# define MCI_DTOE ( 1 << 22) /* Data Time-Out Error */
--# define MCI_OVRE ( 1 << 30) /* RX Overrun Error */
--# define MCI_UNRE ( 1 << 31) /* TX Underrun Error */
-+# define MCI_CMDRDY ( 1 << 0) /* Command Ready */
-+# define MCI_RXRDY ( 1 << 1) /* Receiver Ready */
-+# define MCI_TXRDY ( 1 << 2) /* Transmitter Ready */
-+# define MCI_BLKE ( 1 << 3) /* Data Block Ended */
-+# define MCI_DTIP ( 1 << 4) /* Data Transfer In Progress */
-+# define MCI_NOTBUSY ( 1 << 5) /* Data Not Busy */
-+# define MCI_SDIOIRQA ( 1 << 8) /* SDIO IRQ in slot A */
-+# define MCI_SDIOIRQB ( 1 << 9) /* SDIO IRQ in slot B */
-+# define MCI_RINDE ( 1 << 16) /* Response Index Error */
-+# define MCI_RDIRE ( 1 << 17) /* Response Direction Error */
-+# define MCI_RCRCE ( 1 << 18) /* Response CRC Error */
-+# define MCI_RENDE ( 1 << 19) /* Response End Bit Error */
-+# define MCI_RTOE ( 1 << 20) /* Response Time-Out Error */
-+# define MCI_DCRCE ( 1 << 21) /* Data CRC Error */
-+# define MCI_DTOE ( 1 << 22) /* Data Time-Out Error */
-+# define MCI_OVRE ( 1 << 30) /* RX Overrun Error */
-+# define MCI_UNRE ( 1 << 31) /* TX Underrun Error */
-+#define MCI_DMA 0x0050 /* DMA Configuration[2] */
-+# define MCI_DMA_OFFSET(x) ((x) << 0) /* DMA write buffer offset */
-+# define MCI_DMA_CHKSIZE_1 ( 0 << 5) /* DMA chunk size */
-+# define MCI_DMA_CHKSIZE_4 ( 1 << 5) /* DMA chunk size */
-+# define MCI_DMA_CHKSIZE_8 ( 2 << 5) /* DMA chunk size */
-+# define MCI_DMA_CHKSIZE_16 ( 3 << 5) /* DMA chunk size */
-+# define MCI_DMAEN ( 1 << 8) /* DMA HW handshake enable */
-+#define MCI_CFG 0x0054 /* Configuration[2] */
-+# define MCI_CFG_FIFOMODE ( 1 << 0) /* Start transfer ASAP */
-+# define MCI_CFG_FERRCTRL ( 1 << 4) /* xrun flags clear-on-read */
-+# define MCI_CFG_HSMODE ( 1 << 8) /* Use high-speed signaling */
-+# define MCI_CFG_LSYNC ( 1 << 12) /* Synchronize on last block */
-+#define MCI_WPMR 0x00e4 /* Write Protect Mode[2] */
-+# define MCI_WP_EN ( 1 << 0) /* WP Enable */
-+# define MCI_WP_KEY (0x4d4349 << 8) /* WP Key */
-+#define MCI_WPSR 0x00e8 /* Write Protect Status[2] */
-+# define MCI_GET_WP_VS(x) ((x) & 0x0f)
-+# define MCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff)
-+#define MCI_VERSION 0x00fc /* MCI Core Version[2] */
-+#define MCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */
-
-+/* This is not including the FIFO Aperture on MCI2 */
- #define MCI_REGS_SIZE 0x100
-
- /* Register access macros */
-diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
-index 0000896..3480a5a 100644
---- a/drivers/mmc/host/atmel-mci.c
-+++ b/drivers/mmc/host/atmel-mci.c
-@@ -11,6 +11,8 @@
- #include <linux/clk.h>
- #include <linux/debugfs.h>
- #include <linux/device.h>
-+#include <linux/dmaengine.h>
-+#include <linux/dma-mapping.h>
- #include <linux/err.h>
- #include <linux/gpio.h>
- #include <linux/init.h>
-@@ -29,68 +31,195 @@
- #include <asm/unaligned.h>
-
- #include <mach/board.h>
-+#include <mach/cpu.h>
-
- #include "atmel-mci-regs.h"
-
- #define ATMCI_DATA_ERROR_FLAGS (MCI_DCRCE | MCI_DTOE | MCI_OVRE | MCI_UNRE)
-+#define ATMCI_DMA_THRESHOLD 16
-
- enum {
- EVENT_CMD_COMPLETE = 0,
-- EVENT_DATA_ERROR,
-- EVENT_DATA_COMPLETE,
-- EVENT_STOP_SENT,
-- EVENT_STOP_COMPLETE,
- EVENT_XFER_COMPLETE,
-+ EVENT_DATA_COMPLETE,
-+ EVENT_DATA_ERROR,
-+};
-+
-+enum atmel_mci_state {
-+ STATE_IDLE = 0,
-+ STATE_SENDING_CMD,
-+ STATE_SENDING_DATA,
-+ STATE_DATA_BUSY,
-+ STATE_SENDING_STOP,
-+ STATE_DATA_ERROR,
-+};
-+
-+struct atmel_mci_dma {
-+#ifdef CONFIG_MMC_ATMELMCI_DMA
-+ struct dma_client client;
-+ struct dma_chan *chan;
-+ struct dma_async_tx_descriptor *data_desc;
-+#endif
- };
-
-+/**
-+ * struct atmel_mci - MMC controller state shared between all slots
-+ * @lock: Spinlock protecting the queue and associated data.
-+ * @regs: Pointer to MMIO registers.
-+ * @sg: Scatterlist entry currently being processed by PIO code, if any.
-+ * @pio_offset: Offset into the current scatterlist entry.
-+ * @cur_slot: The slot which is currently using the controller.
-+ * @mrq: The request currently being processed on @cur_slot,
-+ * or NULL if the controller is idle.
-+ * @cmd: The command currently being sent to the card, or NULL.
-+ * @data: The data currently being transferred, or NULL if no data
-+ * transfer is in progress.
-+ * @dma: DMA client state.
-+ * @data_chan: DMA channel being used for the current data transfer.
-+ * @cmd_status: Snapshot of SR taken upon completion of the current
-+ * command. Only valid when EVENT_CMD_COMPLETE is pending.
-+ * @data_status: Snapshot of SR taken upon completion of the current
-+ * data transfer. Only valid when EVENT_DATA_COMPLETE or
-+ * EVENT_DATA_ERROR is pending.
-+ * @stop_cmdr: Value to be loaded into CMDR when the stop command is
-+ * to be sent.
-+ * @tasklet: Tasklet running the request state machine.
-+ * @pending_events: Bitmask of events flagged by the interrupt handler
-+ * to be processed by the tasklet.
-+ * @completed_events: Bitmask of events which the state machine has
-+ * processed.
-+ * @state: Tasklet state.
-+ * @queue: List of slots waiting for access to the controller.
-+ * @need_clock_update: Update the clock rate before the next request.
-+ * @need_reset: Reset controller before next request.
-+ * @mode_reg: Value of the MR register.
-+ * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
-+ * rate and timeout calculations.
-+ * @mapbase: Physical address of the MMIO registers.
-+ * @mck: The peripheral bus clock hooked up to the MMC controller.
-+ * @pdev: Platform device associated with the MMC controller.
-+ * @slot: Slots sharing this MMC controller.
-+ *
-+ * Locking
-+ * =======
-+ *
-+ * @lock is a softirq-safe spinlock protecting @queue as well as
-+ * @cur_slot, @mrq and @state. These must always be updated
-+ * at the same time while holding @lock.
-+ *
-+ * @lock also protects mode_reg and need_clock_update since these are
-+ * used to synchronize mode register updates with the queue
-+ * processing.
-+ *
-+ * The @mrq field of struct atmel_mci_slot is also protected by @lock,
-+ * and must always be written at the same time as the slot is added to
-+ * @queue.
-+ *
-+ * @pending_events and @completed_events are accessed using atomic bit
-+ * operations, so they don't need any locking.
-+ *
-+ * None of the fields touched by the interrupt handler need any
-+ * locking. However, ordering is important: Before EVENT_DATA_ERROR or
-+ * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
-+ * interrupts must be disabled and @data_status updated with a
-+ * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
-+ * CMDRDY interupt must be disabled and @cmd_status updated with a
-+ * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
-+ * bytes_xfered field of @data must be written. This is ensured by
-+ * using barriers.
-+ */
- struct atmel_mci {
-- struct mmc_host *mmc;
-+ spinlock_t lock;
- void __iomem *regs;
-
- struct scatterlist *sg;
- unsigned int pio_offset;
-
-+ struct atmel_mci_slot *cur_slot;
- struct mmc_request *mrq;
- struct mmc_command *cmd;
- struct mmc_data *data;
-
-+ struct atmel_mci_dma dma;
-+ struct dma_chan *data_chan;
-+
- u32 cmd_status;
- u32 data_status;
-- u32 stop_status;
- u32 stop_cmdr;
-
-- u32 mode_reg;
-- u32 sdc_reg;
--
- struct tasklet_struct tasklet;
- unsigned long pending_events;
- unsigned long completed_events;
-+ enum atmel_mci_state state;
-+ struct list_head queue;
-
-- int present;
-- int detect_pin;
-- int wp_pin;
--
-- /* For detect pin debouncing */
-- struct timer_list detect_timer;
--
-+ bool need_clock_update;
-+ bool need_reset;
-+ u32 mode_reg;
- unsigned long bus_hz;
- unsigned long mapbase;
- struct clk *mck;
- struct platform_device *pdev;
-+
-+ struct atmel_mci_slot *slot[ATMEL_MCI_MAX_NR_SLOTS];
-+};
-+
-+/**
-+ * struct atmel_mci_slot - MMC slot state
-+ * @mmc: The mmc_host representing this slot.
-+ * @host: The MMC controller this slot is using.
-+ * @sdc_reg: Value of SDCR to be written before using this slot.
-+ * @mrq: mmc_request currently being processed or waiting to be
-+ * processed, or NULL when the slot is idle.
-+ * @queue_node: List node for placing this node in the @queue list of
-+ * &struct atmel_mci.
-+ * @clock: Clock rate configured by set_ios(). Protected by host->lock.
-+ * @flags: Random state bits associated with the slot.
-+ * @detect_pin: GPIO pin used for card detection, or negative if not
-+ * available.
-+ * @wp_pin: GPIO pin used for card write protect sending, or negative
-+ * if not available.
-+ * @detect_timer: Timer used for debouncing @detect_pin interrupts.
-+ */
-+struct atmel_mci_slot {
-+ struct mmc_host *mmc;
-+ struct atmel_mci *host;
-+
-+ u32 sdc_reg;
-+
-+ struct mmc_request *mrq;
-+ struct list_head queue_node;
-+
-+ unsigned int clock;
-+ unsigned long flags;
-+#define ATMCI_CARD_PRESENT 0
-+#define ATMCI_CARD_NEED_INIT 1
-+#define ATMCI_SHUTDOWN 2
-+
-+ int detect_pin;
-+ int wp_pin;
-+
-+ struct timer_list detect_timer;
- };
-
--#define atmci_is_completed(host, event) \
-- test_bit(event, &host->completed_events)
- #define atmci_test_and_clear_pending(host, event) \
- test_and_clear_bit(event, &host->pending_events)
--#define atmci_test_and_set_completed(host, event) \
-- test_and_set_bit(event, &host->completed_events)
- #define atmci_set_completed(host, event) \
- set_bit(event, &host->completed_events)
- #define atmci_set_pending(host, event) \
- set_bit(event, &host->pending_events)
--#define atmci_clear_pending(host, event) \
-- clear_bit(event, &host->pending_events)
-+
-+/*
-+ * The new MCI2 module isn't 100% compatible with the old MCI module,
-+ * and it has a few nice features which we want to use...
-+ */
-+static inline bool atmci_is_mci2(void)
-+{
-+ if (cpu_is_at32ap7200())
-+ return true;
-+
-+ return false;
-+}
-
- /*
- * The debugfs stuff below is mostly optimized away when
-@@ -98,14 +227,15 @@ struct atmel_mci {
- */
- static int atmci_req_show(struct seq_file *s, void *v)
- {
-- struct atmel_mci *host = s->private;
-- struct mmc_request *mrq = host->mrq;
-+ struct atmel_mci_slot *slot = s->private;
-+ struct mmc_request *mrq;
- struct mmc_command *cmd;
- struct mmc_command *stop;
- struct mmc_data *data;
-
- /* Make sure we get a consistent snapshot */
-- spin_lock_irq(&host->mmc->lock);
-+ spin_lock_bh(&slot->host->lock);
-+ mrq = slot->mrq;
-
- if (mrq) {
- cmd = mrq->cmd;
-@@ -130,7 +260,7 @@ static int atmci_req_show(struct seq_file *s, void *v)
- stop->resp[2], stop->error);
- }
-
-- spin_unlock_irq(&host->mmc->lock);
-+ spin_unlock_bh(&slot->host->lock);
-
- return 0;
- }
-@@ -158,8 +288,15 @@ static void atmci_show_status_reg(struct seq_file *s,
- [3] = "BLKE",
- [4] = "DTIP",
- [5] = "NOTBUSY",
-+ [6] = "ENDRX",
-+ [7] = "ENDTX",
- [8] = "SDIOIRQA",
- [9] = "SDIOIRQB",
-+ [10] = "SDIOIRQC",
-+ [11] = "SDIOIRQD",
-+ [12] = "SDIOWAIT",
-+ [14] = "RXBUFF",
-+ [15] = "TXBUFE",
- [16] = "RINDE",
- [17] = "RDIRE",
- [18] = "RCRCE",
-@@ -167,6 +304,11 @@ static void atmci_show_status_reg(struct seq_file *s,
- [20] = "RTOE",
- [21] = "DCRCE",
- [22] = "DTOE",
-+ [23] = "CSTOE",
-+ [24] = "BLKOVRE",
-+ [25] = "DMADONE",
-+ [26] = "FIFOEMPTY",
-+ [27] = "XFRDONE",
- [30] = "OVRE",
- [31] = "UNRE",
- };
-@@ -193,12 +335,16 @@ static int atmci_regs_show(struct seq_file *s, void *v)
- if (!buf)
- return -ENOMEM;
-
-- /* Grab a more or less consistent snapshot */
-- spin_lock_irq(&host->mmc->lock);
-+ /*
-+ * Grab a more or less consistent snapshot. Note that we're
-+ * not disabling interrupts, so IMR and SR may not be
-+ * consistent.
-+ */
-+ spin_lock_bh(&host->lock);
- clk_enable(host->mck);
- memcpy_fromio(buf, host->regs, MCI_REGS_SIZE);
- clk_disable(host->mck);
-- spin_unlock_irq(&host->mmc->lock);
-+ spin_unlock_bh(&host->lock);
-
- seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n",
- buf[MCI_MR / 4],
-@@ -236,13 +382,13 @@ static const struct file_operations atmci_regs_fops = {
- .release = single_release,
- };
-
--static void atmci_init_debugfs(struct atmel_mci *host)
-+static void atmci_init_debugfs(struct atmel_mci_slot *slot)
- {
-- struct mmc_host *mmc;
-- struct dentry *root;
-- struct dentry *node;
-+ struct mmc_host *mmc = slot->mmc;
-+ struct atmel_mci *host = slot->host;
-+ struct dentry *root;
-+ struct dentry *node;
-
-- mmc = host->mmc;
- root = mmc->debugfs_root;
- if (!root)
- return;
-@@ -254,7 +400,11 @@ static void atmci_init_debugfs(struct atmel_mci *host)
- if (!node)
- goto err;
-
-- node = debugfs_create_file("req", S_IRUSR, root, host, &atmci_req_fops);
-+ node = debugfs_create_file("req", S_IRUSR, root, slot, &atmci_req_fops);
-+ if (!node)
-+ goto err;
-+
-+ node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state);
- if (!node)
- goto err;
-
-@@ -271,25 +421,7 @@ static void atmci_init_debugfs(struct atmel_mci *host)
- return;
-
- err:
-- dev_err(&host->pdev->dev,
-- "failed to initialize debugfs for controller\n");
--}
--
--static void atmci_enable(struct atmel_mci *host)
--{
-- clk_enable(host->mck);
-- mci_writel(host, CR, MCI_CR_MCIEN);
-- mci_writel(host, MR, host->mode_reg);
-- mci_writel(host, SDCR, host->sdc_reg);
--}
--
--static void atmci_disable(struct atmel_mci *host)
--{
-- mci_writel(host, CR, MCI_CR_SWRST);
--
-- /* Stall until write is complete, then disable the bus clock */
-- mci_readl(host, SR);
-- clk_disable(host->mck);
-+ dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n");
- }
-
- static inline unsigned int ns_to_clocks(struct atmel_mci *host,
-@@ -299,7 +431,7 @@ static inline unsigned int ns_to_clocks(struct atmel_mci *host,
- }
-
- static void atmci_set_timeout(struct atmel_mci *host,
-- struct mmc_data *data)
-+ struct atmel_mci_slot *slot, struct mmc_data *data)
- {
- static unsigned dtomul_to_shift[] = {
- 0, 4, 7, 8, 10, 12, 16, 20
-@@ -322,7 +454,7 @@ static void atmci_set_timeout(struct atmel_mci *host,
- dtocyc = 15;
- }
-
-- dev_vdbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
-+ dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n",
- dtocyc << dtomul_to_shift[dtomul]);
- mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc)));
- }
-@@ -375,15 +507,12 @@ static u32 atmci_prepare_command(struct mmc_host *mmc,
- }
-
- static void atmci_start_command(struct atmel_mci *host,
-- struct mmc_command *cmd,
-- u32 cmd_flags)
-+ struct mmc_command *cmd, u32 cmd_flags)
- {
-- /* Must read host->cmd after testing event flags */
-- smp_rmb();
- WARN_ON(host->cmd);
- host->cmd = cmd;
-
-- dev_vdbg(&host->mmc->class_dev,
-+ dev_vdbg(&host->pdev->dev,
- "start command: ARGR=0x%08x CMDR=0x%08x\n",
- cmd->arg, cmd_flags);
-
-@@ -391,34 +520,172 @@ static void atmci_start_command(struct atmel_mci *host,
- mci_writel(host, CMDR, cmd_flags);
- }
-
--static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data)
-+static void send_stop_cmd(struct atmel_mci *host, struct mmc_data *data)
- {
-- struct atmel_mci *host = mmc_priv(mmc);
--
- atmci_start_command(host, data->stop, host->stop_cmdr);
- mci_writel(host, IER, MCI_CMDRDY);
- }
-
--static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
-+#ifdef CONFIG_MMC_ATMELMCI_DMA
-+static void atmci_dma_cleanup(struct atmel_mci *host)
- {
-- struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_data *data = host->data;
-
-- WARN_ON(host->cmd || host->data);
-- host->mrq = NULL;
-+ dma_unmap_sg(&host->pdev->dev, data->sg, data->sg_len,
-+ ((data->flags & MMC_DATA_WRITE)
-+ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
-+}
-+
-+static void atmci_stop_dma(struct atmel_mci *host)
-+{
-+ struct dma_chan *chan = host->data_chan;
-+
-+ if (chan) {
-+ chan->device->device_terminate_all(chan);
-+ atmci_dma_cleanup(host);
-+ } else {
-+ /* Data transfer was stopped by the interrupt handler */
-+ atmci_set_pending(host, EVENT_XFER_COMPLETE);
-+ mci_writel(host, IER, MCI_NOTBUSY);
-+ }
-+}
-+
-+/* This function is called by the DMA driver from tasklet context. */
-+static void atmci_dma_complete(void *arg)
-+{
-+ struct atmel_mci *host = arg;
-+ struct mmc_data *data = host->data;
-+
-+ dev_vdbg(&host->pdev->dev, "DMA complete\n");
-+
-+ atmci_dma_cleanup(host);
-+
-+ /*
-+ * If the card was removed, data will be NULL. No point trying
-+ * to send the stop command or waiting for NBUSY in this case.
-+ */
-+ if (data) {
-+ atmci_set_pending(host, EVENT_XFER_COMPLETE);
-+ tasklet_schedule(&host->tasklet);
-+
-+ /*
-+ * Regardless of what the documentation says, we have
-+ * to wait for NOTBUSY even after block read
-+ * operations.
-+ *
-+ * When the DMA transfer is complete, the controller
-+ * may still be reading the CRC from the card, i.e.
-+ * the data transfer is still in progress and we
-+ * haven't seen all the potential error bits yet.
-+ *
-+ * The interrupt handler will schedule a different
-+ * tasklet to finish things up when the data transfer
-+ * is completely done.
-+ *
-+ * We may not complete the mmc request here anyway
-+ * because the mmc layer may call back and cause us to
-+ * violate the "don't submit new operations from the
-+ * completion callback" rule of the dma engine
-+ * framework.
-+ */
-+ mci_writel(host, IER, MCI_NOTBUSY);
-+ }
-+}
-+
-+static int
-+atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
-+{
-+ struct dma_chan *chan;
-+ struct dma_async_tx_descriptor *desc;
-+ struct scatterlist *sg;
-+ unsigned int i;
-+ enum dma_data_direction direction;
-+
-+ /*
-+ * We don't do DMA on "complex" transfers, i.e. with
-+ * non-word-aligned buffers or lengths. Also, we don't bother
-+ * with all the DMA setup overhead for short transfers.
-+ */
-+ if (data->blocks * data->blksz < ATMCI_DMA_THRESHOLD)
-+ return -EINVAL;
-+ if (data->blksz & 3)
-+ return -EINVAL;
-+
-+ for_each_sg(data->sg, sg, data->sg_len, i) {
-+ if (sg->offset & 3 || sg->length & 3)
-+ return -EINVAL;
-+ }
-+
-+ /* If we don't have a channel, we can't do DMA */
-+ chan = host->dma.chan;
-+ if (chan) {
-+ dma_chan_get(chan);
-+ host->data_chan = chan;
-+ }
-+
-+ if (!chan)
-+ return -ENODEV;
-+
-+ if (atmci_is_mci2())
-+ mci_writel(host, DMA, MCI_DMAEN);
-+
-+ if (data->flags & MMC_DATA_READ)
-+ direction = DMA_FROM_DEVICE;
-+ else
-+ direction = DMA_TO_DEVICE;
-+
-+ desc = chan->device->device_prep_slave_sg(chan,
-+ data->sg, data->sg_len, direction,
-+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-+ if (!desc)
-+ return -ENOMEM;
-+
-+ host->dma.data_desc = desc;
-+ desc->callback = atmci_dma_complete;
-+ desc->callback_param = host;
-+
-+ return 0;
-+}
-+
-+static void atmci_submit_data(struct atmel_mci *host)
-+{
-+ struct dma_chan *chan = host->data_chan;
-+ struct dma_async_tx_descriptor *desc = host->dma.data_desc;
-+
-+ if (chan) {
-+ desc->tx_submit(desc);
-+ chan->device->device_issue_pending(chan);
-+ }
-+}
-
-- atmci_disable(host);
-+#else /* CONFIG_MMC_ATMELMCI_DMA */
-
-- mmc_request_done(mmc, mrq);
-+static int atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
-+{
-+ return -ENOSYS;
- }
-
-+static void atmci_submit_data(struct atmel_mci *host)
-+{
-+
-+}
-+
-+static void atmci_stop_dma(struct atmel_mci *host)
-+{
-+ /* Data transfer was stopped by the interrupt handler */
-+ atmci_set_pending(host, EVENT_XFER_COMPLETE);
-+ mci_writel(host, IER, MCI_NOTBUSY);
-+}
-+
-+#endif /* CONFIG_MMC_ATMELMCI_DMA */
-+
- /*
- * Returns a mask of interrupt flags to be enabled after the whole
- * request has been prepared.
- */
--static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data)
-+static u32 atmci_prepare_data(struct atmel_mci *host, struct mmc_data *data)
- {
-- struct atmel_mci *host = mmc_priv(mmc);
-- u32 iflags;
-+ u32 iflags;
-
- data->error = -EINPROGRESS;
-
-@@ -426,77 +693,95 @@ static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data)
- host->sg = NULL;
- host->data = data;
-
-- dev_vdbg(&mmc->class_dev, "BLKR=0x%08x\n",
-- MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz));
--
- iflags = ATMCI_DATA_ERROR_FLAGS;
-- host->sg = data->sg;
-- host->pio_offset = 0;
-- if (data->flags & MMC_DATA_READ)
-- iflags |= MCI_RXRDY;
-- else
-- iflags |= MCI_TXRDY;
-+ if (atmci_prepare_data_dma(host, data)) {
-+ if (atmci_is_mci2())
-+ mci_writel(host, DMA, 0);
-+ host->data_chan = NULL;
-+
-+ /*
-+ * Errata: MMC data write operation with less than 12
-+ * bytes is impossible.
-+ *
-+ * Errata: MCI Transmit Data Register (TDR) FIFO
-+ * corruption when length is not multiple of 4.
-+ */
-+ if (data->blocks * data->blksz < 12
-+ || (data->blocks * data->blksz) & 3)
-+ host->need_reset = true;
-+
-+ host->sg = data->sg;
-+ host->pio_offset = 0;
-+ if (data->flags & MMC_DATA_READ)
-+ iflags |= MCI_RXRDY;
-+ else
-+ iflags |= MCI_TXRDY;
-+ }
-
- return iflags;
- }
-
--static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
-+static void atmci_start_request(struct atmel_mci *host,
-+ struct atmel_mci_slot *slot)
- {
-- struct atmel_mci *host = mmc_priv(mmc);
-- struct mmc_data *data;
-+ struct mmc_request *mrq;
- struct mmc_command *cmd;
-+ struct mmc_data *data;
- u32 iflags;
-- u32 cmdflags = 0;
-+ u32 cmdflags;
-
-- iflags = mci_readl(host, IMR);
-- if (iflags)
-- dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
-- mci_readl(host, IMR));
-+ mrq = slot->mrq;
-+ host->cur_slot = slot;
-+ host->mrq = mrq;
-
-- WARN_ON(host->mrq != NULL);
-+ host->pending_events = 0;
-+ host->completed_events = 0;
-+ host->data_status = 0;
-
-- /*
-- * We may "know" the card is gone even though there's still an
-- * electrical connection. If so, we really need to communicate
-- * this to the MMC core since there won't be any more
-- * interrupts as the card is completely removed. Otherwise,
-- * the MMC core might believe the card is still there even
-- * though the card was just removed very slowly.
-- */
-- if (!host->present) {
-- mrq->cmd->error = -ENOMEDIUM;
-- mmc_request_done(mmc, mrq);
-- return;
-+ if (host->need_reset) {
-+ mci_writel(host, CR, MCI_CR_SWRST);
-+ mci_writel(host, CR, MCI_CR_MCIEN);
-+ mci_writel(host, MR, host->mode_reg);
-+ host->need_reset = false;
- }
-+ mci_writel(host, SDCR, slot->sdc_reg);
-
-- host->mrq = mrq;
-- host->pending_events = 0;
-- host->completed_events = 0;
-+ iflags = mci_readl(host, IMR);
-+ if (iflags)
-+ dev_warn(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n",
-+ iflags);
-
-- atmci_enable(host);
-+ if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) {
-+ /* Send init sequence (74 clock cycles) */
-+ mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT);
-+ while (!(mci_readl(host, SR) & MCI_CMDRDY))
-+ cpu_relax();
-+ }
-
-- /* We don't support multiple blocks of weird lengths. */
-+ iflags = 0;
- data = mrq->data;
- if (data) {
-- if (data->blocks > 1 && data->blksz & 3)
-- goto fail;
-- atmci_set_timeout(host, data);
-+ atmci_set_timeout(host, slot, data);
-
- /* Must set block count/size before sending command */
- mci_writel(host, BLKR, MCI_BCNT(data->blocks)
- | MCI_BLKLEN(data->blksz));
-+ dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n",
-+ MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz));
-+
-+ iflags |= atmci_prepare_data(host, data);
- }
-
-- iflags = MCI_CMDRDY;
-+ iflags |= MCI_CMDRDY;
- cmd = mrq->cmd;
-- cmdflags = atmci_prepare_command(mmc, cmd);
-+ cmdflags = atmci_prepare_command(slot->mmc, cmd);
- atmci_start_command(host, cmd, cmdflags);
-
- if (data)
-- iflags |= atmci_submit_data(mmc, data);
-+ atmci_submit_data(host);
-
- if (mrq->stop) {
-- host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
-+ host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop);
- host->stop_cmdr |= MCI_CMDR_STOP_XFER;
- if (!(data->flags & MMC_DATA_WRITE))
- host->stop_cmdr |= MCI_CMDR_TRDIR_READ;
-@@ -513,59 +798,156 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
- * prepared yet.)
- */
- mci_writel(host, IER, iflags);
-+}
-
-- return;
-+static void atmci_queue_request(struct atmel_mci *host,
-+ struct atmel_mci_slot *slot, struct mmc_request *mrq)
-+{
-+ dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n",
-+ host->state);
-+
-+ spin_lock_bh(&host->lock);
-+ slot->mrq = mrq;
-+ if (host->state == STATE_IDLE) {
-+ host->state = STATE_SENDING_CMD;
-+ atmci_start_request(host, slot);
-+ } else {
-+ list_add_tail(&slot->queue_node, &host->queue);
-+ }
-+ spin_unlock_bh(&host->lock);
-+}
-
--fail:
-- atmci_disable(host);
-- host->mrq = NULL;
-- mrq->cmd->error = -EINVAL;
-- mmc_request_done(mmc, mrq);
-+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+ struct atmel_mci_slot *slot = mmc_priv(mmc);
-+ struct atmel_mci *host = slot->host;
-+ struct mmc_data *data;
-+
-+ WARN_ON(slot->mrq);
-+
-+ /*
-+ * We may "know" the card is gone even though there's still an
-+ * electrical connection. If so, we really need to communicate
-+ * this to the MMC core since there won't be any more
-+ * interrupts as the card is completely removed. Otherwise,
-+ * the MMC core might believe the card is still there even
-+ * though the card was just removed very slowly.
-+ */
-+ if (!test_bit(ATMCI_CARD_PRESENT, &slot->flags)) {
-+ mrq->cmd->error = -ENOMEDIUM;
-+ mmc_request_done(mmc, mrq);
-+ return;
-+ }
-+
-+ /* We don't support multiple blocks of weird lengths. */
-+ data = mrq->data;
-+ if (data && data->blocks > 1 && data->blksz & 3) {
-+ mrq->cmd->error = -EINVAL;
-+ mmc_request_done(mmc, mrq);
-+ }
-+
-+ atmci_queue_request(host, slot, mrq);
- }
-
- static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
- {
-- struct atmel_mci *host = mmc_priv(mmc);
-+ struct atmel_mci_slot *slot = mmc_priv(mmc);
-+ struct atmel_mci *host = slot->host;
-+ unsigned int i;
-+
-+ slot->sdc_reg &= ~MCI_SDCBUS_MASK;
-+ switch (ios->bus_width) {
-+ case MMC_BUS_WIDTH_1:
-+ slot->sdc_reg |= MCI_SDCBUS_1BIT;
-+ break;
-+ case MMC_BUS_WIDTH_4:
-+ slot->sdc_reg |= MCI_SDCBUS_4BIT;
-+ break;
-+ }
-
- if (ios->clock) {
-+ unsigned int clock_min = ~0U;
- u32 clkdiv;
-
-- /* Set clock rate */
-- clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * ios->clock) - 1;
-+ spin_lock_bh(&host->lock);
-+ if (!host->mode_reg) {
-+ clk_enable(host->mck);
-+ mci_writel(host, CR, MCI_CR_SWRST);
-+ mci_writel(host, CR, MCI_CR_MCIEN);
-+ }
-+
-+ /*
-+ * Use mirror of ios->clock to prevent race with mmc
-+ * core ios update when finding the minimum.
-+ */
-+ slot->clock = ios->clock;
-+ for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
-+ if (host->slot[i] && host->slot[i]->clock
-+ && host->slot[i]->clock < clock_min)
-+ clock_min = host->slot[i]->clock;
-+ }
-+
-+ /* Calculate clock divider */
-+ clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1;
- if (clkdiv > 255) {
- dev_warn(&mmc->class_dev,
- "clock %u too slow; using %lu\n",
-- ios->clock, host->bus_hz / (2 * 256));
-+ clock_min, host->bus_hz / (2 * 256));
- clkdiv = 255;
- }
-
-+ /*
-+ * WRPROOF and RDPROOF prevent overruns/underruns by
-+ * stopping the clock when the FIFO is full/empty.
-+ * This state is not expected to last for long.
-+ */
- host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF
- | MCI_MR_RDPROOF;
-- }
-
-- switch (ios->bus_width) {
-- case MMC_BUS_WIDTH_1:
-- host->sdc_reg = 0;
-- break;
-- case MMC_BUS_WIDTH_4:
-- host->sdc_reg = MCI_SDCBUS_4BIT;
-- break;
-+ if (list_empty(&host->queue))
-+ mci_writel(host, MR, host->mode_reg);
-+ else
-+ host->need_clock_update = true;
-+
-+ spin_unlock_bh(&host->lock);
-+ } else {
-+ bool any_slot_active = false;
-+
-+ spin_lock_bh(&host->lock);
-+ slot->clock = 0;
-+ for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
-+ if (host->slot[i] && host->slot[i]->clock) {
-+ any_slot_active = true;
-+ break;
-+ }
-+ }
-+ if (!any_slot_active) {
-+ mci_writel(host, CR, MCI_CR_MCIDIS);
-+ if (host->mode_reg) {
-+ mci_readl(host, MR);
-+ clk_disable(host->mck);
-+ }
-+ host->mode_reg = 0;
-+ }
-+ spin_unlock_bh(&host->lock);
- }
-
- switch (ios->power_mode) {
-- case MMC_POWER_ON:
-- /* Send init sequence (74 clock cycles) */
-- atmci_enable(host);
-- mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT);
-- while (!(mci_readl(host, SR) & MCI_CMDRDY))
-- cpu_relax();
-- atmci_disable(host);
-+ case MMC_POWER_UP:
-+ set_bit(ATMCI_CARD_NEED_INIT, &slot->flags);
- break;
- default:
- /*
- * TODO: None of the currently available AVR32-based
- * boards allow MMC power to be turned off. Implement
- * power control when this can be tested properly.
-+ *
-+ * We also need to hook this into the clock management
-+ * somehow so that newly inserted cards aren't
-+ * subjected to a fast clock before we have a chance
-+ * to figure out what the maximum rate is. Currently,
-+ * there's no way to avoid this, and there never will
-+ * be for boards that don't support power control.
- */
- break;
- }
-@@ -573,31 +955,82 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-
- static int atmci_get_ro(struct mmc_host *mmc)
- {
-- int read_only = 0;
-- struct atmel_mci *host = mmc_priv(mmc);
-+ int read_only = -ENOSYS;
-+ struct atmel_mci_slot *slot = mmc_priv(mmc);
-
-- if (gpio_is_valid(host->wp_pin)) {
-- read_only = gpio_get_value(host->wp_pin);
-+ if (gpio_is_valid(slot->wp_pin)) {
-+ read_only = gpio_get_value(slot->wp_pin);
- dev_dbg(&mmc->class_dev, "card is %s\n",
- read_only ? "read-only" : "read-write");
-- } else {
-- dev_dbg(&mmc->class_dev,
-- "no pin for checking read-only switch."
-- " Assuming write-enable.\n");
- }
-
- return read_only;
- }
-
--static struct mmc_host_ops atmci_ops = {
-+static int atmci_get_cd(struct mmc_host *mmc)
-+{
-+ int present = -ENOSYS;
-+ struct atmel_mci_slot *slot = mmc_priv(mmc);
-+
-+ if (gpio_is_valid(slot->detect_pin)) {
-+ present = !gpio_get_value(slot->detect_pin);
-+ dev_dbg(&mmc->class_dev, "card is %spresent\n",
-+ present ? "" : "not ");
-+ }
-+
-+ return present;
-+}
-+
-+static const struct mmc_host_ops atmci_ops = {
- .request = atmci_request,
- .set_ios = atmci_set_ios,
- .get_ro = atmci_get_ro,
-+ .get_cd = atmci_get_cd,
- };
-
-+/* Called with host->lock held */
-+static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq)
-+ __releases(&host->lock)
-+ __acquires(&host->lock)
-+{
-+ struct atmel_mci_slot *slot = NULL;
-+ struct mmc_host *prev_mmc = host->cur_slot->mmc;
-+
-+ WARN_ON(host->cmd || host->data);
-+
-+ /*
-+ * Update the MMC clock rate if necessary. This may be
-+ * necessary if set_ios() is called when a different slot is
-+ * busy transfering data.
-+ */
-+ if (host->need_clock_update)
-+ mci_writel(host, MR, host->mode_reg);
-+
-+ host->cur_slot->mrq = NULL;
-+ host->mrq = NULL;
-+ if (!list_empty(&host->queue)) {
-+ slot = list_entry(host->queue.next,
-+ struct atmel_mci_slot, queue_node);
-+ list_del(&slot->queue_node);
-+ dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n",
-+ mmc_hostname(slot->mmc));
-+ host->state = STATE_SENDING_CMD;
-+ atmci_start_request(host, slot);
-+ } else {
-+ dev_vdbg(&host->pdev->dev, "list empty\n");
-+ host->state = STATE_IDLE;
-+ }
-+
-+ spin_unlock(&host->lock);
-+ mmc_request_done(prev_mmc, mrq);
-+ spin_lock(&host->lock);
-+}
-+
- static void atmci_command_complete(struct atmel_mci *host,
-- struct mmc_command *cmd, u32 status)
-+ struct mmc_command *cmd)
- {
-+ u32 status = host->cmd_status;
-+
- /* Read the response from the card (up to 16 bytes) */
- cmd->resp[0] = mci_readl(host, RSPR);
- cmd->resp[1] = mci_readl(host, RSPR);
-@@ -614,11 +1047,12 @@ static void atmci_command_complete(struct atmel_mci *host,
- cmd->error = 0;
-
- if (cmd->error) {
-- dev_dbg(&host->mmc->class_dev,
-+ dev_dbg(&host->pdev->dev,
- "command error: status=0x%08x\n", status);
-
- if (cmd->data) {
- host->data = NULL;
-+ atmci_stop_dma(host);
- mci_writel(host, IDR, MCI_NOTBUSY
- | MCI_TXRDY | MCI_RXRDY
- | ATMCI_DATA_ERROR_FLAGS);
-@@ -628,146 +1062,222 @@ static void atmci_command_complete(struct atmel_mci *host,
-
- static void atmci_detect_change(unsigned long data)
- {
-- struct atmel_mci *host = (struct atmel_mci *)data;
-- struct mmc_request *mrq = host->mrq;
-- int present;
-+ struct atmel_mci_slot *slot = (struct atmel_mci_slot *)data;
-+ bool present;
-+ bool present_old;
-
- /*
-- * atmci_remove() sets detect_pin to -1 before freeing the
-- * interrupt. We must not re-enable the interrupt if it has
-- * been freed.
-+ * atmci_cleanup_slot() sets the ATMCI_SHUTDOWN flag before
-+ * freeing the interrupt. We must not re-enable the interrupt
-+ * if it has been freed, and if we're shutting down, it
-+ * doesn't really matter whether the card is present or not.
- */
- smp_rmb();
-- if (!gpio_is_valid(host->detect_pin))
-+ if (test_bit(ATMCI_SHUTDOWN, &slot->flags))
- return;
-
-- enable_irq(gpio_to_irq(host->detect_pin));
-- present = !gpio_get_value(host->detect_pin);
-+ enable_irq(gpio_to_irq(slot->detect_pin));
-+ present = !gpio_get_value(slot->detect_pin);
-+ present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags);
-+
-+ dev_vdbg(&slot->mmc->class_dev, "detect change: %d (was %d)\n",
-+ present, present_old);
-
-- dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n",
-- present, host->present);
-+ if (present != present_old) {
-+ struct atmel_mci *host = slot->host;
-+ struct mmc_request *mrq;
-
-- if (present != host->present) {
-- dev_dbg(&host->mmc->class_dev, "card %s\n",
-+ dev_dbg(&slot->mmc->class_dev, "card %s\n",
- present ? "inserted" : "removed");
-- host->present = present;
-
-- /* Reset controller if card is gone */
-- if (!present) {
-- mci_writel(host, CR, MCI_CR_SWRST);
-- mci_writel(host, IDR, ~0UL);
-- mci_writel(host, CR, MCI_CR_MCIEN);
-- }
-+ spin_lock(&host->lock);
-+
-+ if (!present)
-+ clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
-+ else
-+ set_bit(ATMCI_CARD_PRESENT, &slot->flags);
-
- /* Clean up queue if present */
-+ mrq = slot->mrq;
- if (mrq) {
-- /*
-- * Reset controller to terminate any ongoing
-- * commands or data transfers.
-- */
-- mci_writel(host, CR, MCI_CR_SWRST);
-+ if (mrq == host->mrq) {
-+ /*
-+ * Reset controller to terminate any ongoing
-+ * commands or data transfers.
-+ */
-+ mci_writel(host, CR, MCI_CR_SWRST);
-+ mci_writel(host, CR, MCI_CR_MCIEN);
-+ mci_writel(host, MR, host->mode_reg);
-
-- if (!atmci_is_completed(host, EVENT_CMD_COMPLETE))
-- mrq->cmd->error = -ENOMEDIUM;
--
-- if (mrq->data && !atmci_is_completed(host,
-- EVENT_DATA_COMPLETE)) {
- host->data = NULL;
-- mrq->data->error = -ENOMEDIUM;
-+ host->cmd = NULL;
-+
-+ switch (host->state) {
-+ case STATE_IDLE:
-+ break;
-+ case STATE_SENDING_CMD:
-+ mrq->cmd->error = -ENOMEDIUM;
-+ if (!mrq->data)
-+ break;
-+ /* fall through */
-+ case STATE_SENDING_DATA:
-+ mrq->data->error = -ENOMEDIUM;
-+ atmci_stop_dma(host);
-+ break;
-+ case STATE_DATA_BUSY:
-+ case STATE_DATA_ERROR:
-+ if (mrq->data->error == -EINPROGRESS)
-+ mrq->data->error = -ENOMEDIUM;
-+ if (!mrq->stop)
-+ break;
-+ /* fall through */
-+ case STATE_SENDING_STOP:
-+ mrq->stop->error = -ENOMEDIUM;
-+ break;
-+ }
-+
-+ atmci_request_end(host, mrq);
-+ } else {
-+ list_del(&slot->queue_node);
-+ mrq->cmd->error = -ENOMEDIUM;
-+ if (mrq->data)
-+ mrq->data->error = -ENOMEDIUM;
-+ if (mrq->stop)
-+ mrq->stop->error = -ENOMEDIUM;
-+
-+ spin_unlock(&host->lock);
-+ mmc_request_done(slot->mmc, mrq);
-+ spin_lock(&host->lock);
- }
-- if (mrq->stop && !atmci_is_completed(host,
-- EVENT_STOP_COMPLETE))
-- mrq->stop->error = -ENOMEDIUM;
--
-- host->cmd = NULL;
-- atmci_request_end(host->mmc, mrq);
- }
-+ spin_unlock(&host->lock);
-
-- mmc_detect_change(host->mmc, 0);
-+ mmc_detect_change(slot->mmc, 0);
- }
- }
-
- static void atmci_tasklet_func(unsigned long priv)
- {
-- struct mmc_host *mmc = (struct mmc_host *)priv;
-- struct atmel_mci *host = mmc_priv(mmc);
-+ struct atmel_mci *host = (struct atmel_mci *)priv;
- struct mmc_request *mrq = host->mrq;
- struct mmc_data *data = host->data;
-+ struct mmc_command *cmd = host->cmd;
-+ enum atmel_mci_state state = host->state;
-+ enum atmel_mci_state prev_state;
-+ u32 status;
-+
-+ spin_lock(&host->lock);
-
-- dev_vdbg(&mmc->class_dev,
-- "tasklet: pending/completed/mask %lx/%lx/%x\n",
-- host->pending_events, host->completed_events,
-+ state = host->state;
-+
-+ dev_vdbg(&host->pdev->dev,
-+ "tasklet: state %u pending/completed/mask %lx/%lx/%x\n",
-+ state, host->pending_events, host->completed_events,
- mci_readl(host, IMR));
-
-- if (atmci_test_and_clear_pending(host, EVENT_CMD_COMPLETE)) {
-- /*
-- * host->cmd must be set to NULL before the interrupt
-- * handler sees EVENT_CMD_COMPLETE
-- */
-- host->cmd = NULL;
-- smp_wmb();
-- atmci_set_completed(host, EVENT_CMD_COMPLETE);
-- atmci_command_complete(host, mrq->cmd, host->cmd_status);
--
-- if (!mrq->cmd->error && mrq->stop
-- && atmci_is_completed(host, EVENT_XFER_COMPLETE)
-- && !atmci_test_and_set_completed(host,
-- EVENT_STOP_SENT))
-- send_stop_cmd(host->mmc, mrq->data);
-- }
-- if (atmci_test_and_clear_pending(host, EVENT_STOP_COMPLETE)) {
-- /*
-- * host->cmd must be set to NULL before the interrupt
-- * handler sees EVENT_STOP_COMPLETE
-- */
-- host->cmd = NULL;
-- smp_wmb();
-- atmci_set_completed(host, EVENT_STOP_COMPLETE);
-- atmci_command_complete(host, mrq->stop, host->stop_status);
-- }
-- if (atmci_test_and_clear_pending(host, EVENT_DATA_ERROR)) {
-- u32 status = host->data_status;
-+ do {
-+ prev_state = state;
-
-- dev_vdbg(&mmc->class_dev, "data error: status=%08x\n", status);
-+ switch (state) {
-+ case STATE_IDLE:
-+ break;
-
-- atmci_set_completed(host, EVENT_DATA_ERROR);
-- atmci_set_completed(host, EVENT_DATA_COMPLETE);
-+ case STATE_SENDING_CMD:
-+ if (!atmci_test_and_clear_pending(host,
-+ EVENT_CMD_COMPLETE))
-+ break;
-
-- if (status & MCI_DTOE) {
-- dev_dbg(&mmc->class_dev,
-- "data timeout error\n");
-- data->error = -ETIMEDOUT;
-- } else if (status & MCI_DCRCE) {
-- dev_dbg(&mmc->class_dev, "data CRC error\n");
-- data->error = -EILSEQ;
-- } else {
-- dev_dbg(&mmc->class_dev,
-- "data FIFO error (status=%08x)\n",
-- status);
-- data->error = -EIO;
-- }
-+ host->cmd = NULL;
-+ atmci_set_completed(host, EVENT_CMD_COMPLETE);
-+ atmci_command_complete(host, mrq->cmd);
-+ if (!mrq->data || cmd->error) {
-+ atmci_request_end(host, host->mrq);
-+ goto unlock;
-+ }
-+
-+ prev_state = state = STATE_SENDING_DATA;
-+ /* fall through */
-+
-+ case STATE_SENDING_DATA:
-+ if (atmci_test_and_clear_pending(host,
-+ EVENT_DATA_ERROR)) {
-+ atmci_stop_dma(host);
-+ if (data->stop)
-+ send_stop_cmd(host, data);
-+ state = STATE_DATA_ERROR;
-+ break;
-+ }
-
-- if (host->present && data->stop
-- && atmci_is_completed(host, EVENT_CMD_COMPLETE)
-- && !atmci_test_and_set_completed(
-- host, EVENT_STOP_SENT))
-- send_stop_cmd(host->mmc, data);
-+ if (!atmci_test_and_clear_pending(host,
-+ EVENT_XFER_COMPLETE))
-+ break;
-
-- host->data = NULL;
-- }
-- if (atmci_test_and_clear_pending(host, EVENT_DATA_COMPLETE)) {
-- atmci_set_completed(host, EVENT_DATA_COMPLETE);
-+ atmci_set_completed(host, EVENT_XFER_COMPLETE);
-+ prev_state = state = STATE_DATA_BUSY;
-+ /* fall through */
-+
-+ case STATE_DATA_BUSY:
-+ if (!atmci_test_and_clear_pending(host,
-+ EVENT_DATA_COMPLETE))
-+ break;
-+
-+ host->data = NULL;
-+ atmci_set_completed(host, EVENT_DATA_COMPLETE);
-+ status = host->data_status;
-+ if (unlikely(status & ATMCI_DATA_ERROR_FLAGS)) {
-+ if (status & MCI_DTOE) {
-+ dev_dbg(&host->pdev->dev,
-+ "data timeout error\n");
-+ data->error = -ETIMEDOUT;
-+ } else if (status & MCI_DCRCE) {
-+ dev_dbg(&host->pdev->dev,
-+ "data CRC error\n");
-+ data->error = -EILSEQ;
-+ } else {
-+ dev_dbg(&host->pdev->dev,
-+ "data FIFO error (status=%08x)\n",
-+ status);
-+ data->error = -EIO;
-+ }
-+ } else {
-+ data->bytes_xfered = data->blocks * data->blksz;
-+ data->error = 0;
-+ }
-+
-+ if (!data->stop) {
-+ atmci_request_end(host, host->mrq);
-+ goto unlock;
-+ }
-+
-+ prev_state = state = STATE_SENDING_STOP;
-+ if (!data->error)
-+ send_stop_cmd(host, data);
-+ /* fall through */
-+
-+ case STATE_SENDING_STOP:
-+ if (!atmci_test_and_clear_pending(host,
-+ EVENT_CMD_COMPLETE))
-+ break;
-+
-+ host->cmd = NULL;
-+ atmci_command_complete(host, mrq->stop);
-+ atmci_request_end(host, host->mrq);
-+ goto unlock;
-+
-+ case STATE_DATA_ERROR:
-+ if (!atmci_test_and_clear_pending(host,
-+ EVENT_XFER_COMPLETE))
-+ break;
-
-- if (!atmci_is_completed(host, EVENT_DATA_ERROR)) {
-- data->bytes_xfered = data->blocks * data->blksz;
-- data->error = 0;
-+ state = STATE_DATA_BUSY;
-+ break;
- }
-+ } while (state != prev_state);
-
-- host->data = NULL;
-- }
-+ host->state = state;
-
-- if (host->mrq && !host->cmd && !host->data)
-- atmci_request_end(mmc, host->mrq);
-+unlock:
-+ spin_unlock(&host->lock);
- }
-
- static void atmci_read_data_pio(struct atmel_mci *host)
-@@ -789,6 +1299,7 @@ static void atmci_read_data_pio(struct atmel_mci *host)
- nbytes += 4;
-
- if (offset == sg->length) {
-+ flush_dcache_page(sg_page(sg));
- host->sg = sg = sg_next(sg);
- if (!sg)
- goto done;
-@@ -817,9 +1328,11 @@ static void atmci_read_data_pio(struct atmel_mci *host)
- mci_writel(host, IDR, (MCI_NOTBUSY | MCI_RXRDY
- | ATMCI_DATA_ERROR_FLAGS));
- host->data_status = status;
-+ data->bytes_xfered += nbytes;
-+ smp_wmb();
- atmci_set_pending(host, EVENT_DATA_ERROR);
- tasklet_schedule(&host->tasklet);
-- break;
-+ return;
- }
- } while (status & MCI_RXRDY);
-
-@@ -832,10 +1345,8 @@ done:
- mci_writel(host, IDR, MCI_RXRDY);
- mci_writel(host, IER, MCI_NOTBUSY);
- data->bytes_xfered += nbytes;
-- atmci_set_completed(host, EVENT_XFER_COMPLETE);
-- if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE)
-- && !atmci_test_and_set_completed(host, EVENT_STOP_SENT))
-- send_stop_cmd(host->mmc, data);
-+ smp_wmb();
-+ atmci_set_pending(host, EVENT_XFER_COMPLETE);
- }
-
- static void atmci_write_data_pio(struct atmel_mci *host)
-@@ -888,9 +1399,11 @@ static void atmci_write_data_pio(struct atmel_mci *host)
- mci_writel(host, IDR, (MCI_NOTBUSY | MCI_TXRDY
- | ATMCI_DATA_ERROR_FLAGS));
- host->data_status = status;
-+ data->bytes_xfered += nbytes;
-+ smp_wmb();
- atmci_set_pending(host, EVENT_DATA_ERROR);
- tasklet_schedule(&host->tasklet);
-- break;
-+ return;
- }
- } while (status & MCI_TXRDY);
-
-@@ -903,38 +1416,26 @@ done:
- mci_writel(host, IDR, MCI_TXRDY);
- mci_writel(host, IER, MCI_NOTBUSY);
- data->bytes_xfered += nbytes;
-- atmci_set_completed(host, EVENT_XFER_COMPLETE);
-- if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE)
-- && !atmci_test_and_set_completed(host, EVENT_STOP_SENT))
-- send_stop_cmd(host->mmc, data);
-+ smp_wmb();
-+ atmci_set_pending(host, EVENT_XFER_COMPLETE);
- }
-
--static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
-+static void atmci_cmd_interrupt(struct atmel_mci *host, u32 status)
- {
-- struct atmel_mci *host = mmc_priv(mmc);
--
- mci_writel(host, IDR, MCI_CMDRDY);
-
-- if (atmci_is_completed(host, EVENT_STOP_SENT)) {
-- host->stop_status = status;
-- atmci_set_pending(host, EVENT_STOP_COMPLETE);
-- } else {
-- host->cmd_status = status;
-- atmci_set_pending(host, EVENT_CMD_COMPLETE);
-- }
--
-+ host->cmd_status = status;
-+ smp_wmb();
-+ atmci_set_pending(host, EVENT_CMD_COMPLETE);
- tasklet_schedule(&host->tasklet);
- }
-
- static irqreturn_t atmci_interrupt(int irq, void *dev_id)
- {
-- struct mmc_host *mmc = dev_id;
-- struct atmel_mci *host = mmc_priv(mmc);
-+ struct atmel_mci *host = dev_id;
- u32 status, mask, pending;
- unsigned int pass_count = 0;
-
-- spin_lock(&mmc->lock);
--
- do {
- status = mci_readl(host, SR);
- mask = mci_readl(host, IMR);
-@@ -946,13 +1447,18 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id)
- mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS
- | MCI_RXRDY | MCI_TXRDY);
- pending &= mci_readl(host, IMR);
-+
- host->data_status = status;
-+ smp_wmb();
- atmci_set_pending(host, EVENT_DATA_ERROR);
- tasklet_schedule(&host->tasklet);
- }
- if (pending & MCI_NOTBUSY) {
-- mci_writel(host, IDR, (MCI_NOTBUSY
-- | ATMCI_DATA_ERROR_FLAGS));
-+ mci_writel(host, IDR,
-+ ATMCI_DATA_ERROR_FLAGS | MCI_NOTBUSY);
-+ if (!host->data_status)
-+ host->data_status = status;
-+ smp_wmb();
- atmci_set_pending(host, EVENT_DATA_COMPLETE);
- tasklet_schedule(&host->tasklet);
- }
-@@ -962,18 +1468,15 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id)
- atmci_write_data_pio(host);
-
- if (pending & MCI_CMDRDY)
-- atmci_cmd_interrupt(mmc, status);
-+ atmci_cmd_interrupt(host, status);
- } while (pass_count++ < 5);
-
-- spin_unlock(&mmc->lock);
--
- return pass_count ? IRQ_HANDLED : IRQ_NONE;
- }
-
- static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
- {
-- struct mmc_host *mmc = dev_id;
-- struct atmel_mci *host = mmc_priv(mmc);
-+ struct atmel_mci_slot *slot = dev_id;
-
- /*
- * Disable interrupts until the pin has stabilized and check
-@@ -981,19 +1484,176 @@ static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
- * middle of the timer routine when this interrupt triggers.
- */
- disable_irq_nosync(irq);
-- mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20));
-+ mod_timer(&slot->detect_timer, jiffies + msecs_to_jiffies(20));
-
- return IRQ_HANDLED;
- }
-
-+#ifdef CONFIG_MMC_ATMELMCI_DMA
-+
-+static inline struct atmel_mci *
-+dma_client_to_atmel_mci(struct dma_client *client)
-+{
-+ return container_of(client, struct atmel_mci, dma.client);
-+}
-+
-+static enum dma_state_client atmci_dma_event(struct dma_client *client,
-+ struct dma_chan *chan, enum dma_state state)
-+{
-+ struct atmel_mci *host;
-+ enum dma_state_client ret = DMA_NAK;
-+
-+ host = dma_client_to_atmel_mci(client);
-+
-+ switch (state) {
-+ case DMA_RESOURCE_AVAILABLE:
-+ spin_lock_bh(&host->lock);
-+ if (!host->dma.chan) {
-+ host->dma.chan = chan;
-+ ret = DMA_ACK;
-+ }
-+ spin_unlock_bh(&host->lock);
-+
-+ if (ret == DMA_ACK)
-+ dev_info(&host->pdev->dev,
-+ "Using %s for DMA transfers\n",
-+ chan->dev.bus_id);
-+ break;
-+
-+ case DMA_RESOURCE_REMOVED:
-+ spin_lock_bh(&host->lock);
-+ if (host->dma.chan == chan) {
-+ host->dma.chan = NULL;
-+ ret = DMA_ACK;
-+ }
-+ spin_unlock_bh(&host->lock);
-+
-+ if (ret == DMA_ACK)
-+ dev_info(&host->pdev->dev,
-+ "Lost %s, falling back to PIO\n",
-+ chan->dev.bus_id);
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+
-+ return ret;
-+}
-+#endif /* CONFIG_MMC_ATMELMCI_DMA */
-+
-+static int __init atmci_init_slot(struct atmel_mci *host,
-+ struct mci_slot_pdata *slot_data, unsigned int id,
-+ u32 sdc_reg)
-+{
-+ struct mmc_host *mmc;
-+ struct atmel_mci_slot *slot;
-+
-+ mmc = mmc_alloc_host(sizeof(struct atmel_mci_slot), &host->pdev->dev);
-+ if (!mmc)
-+ return -ENOMEM;
-+
-+ slot = mmc_priv(mmc);
-+ slot->mmc = mmc;
-+ slot->host = host;
-+ slot->detect_pin = slot_data->detect_pin;
-+ slot->wp_pin = slot_data->wp_pin;
-+ slot->sdc_reg = sdc_reg;
-+
-+ mmc->ops = &atmci_ops;
-+ mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512);
-+ mmc->f_max = host->bus_hz / 2;
-+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-+ if (slot_data->bus_width >= 4)
-+ mmc->caps |= MMC_CAP_4_BIT_DATA;
-+
-+ mmc->max_hw_segs = 64;
-+ mmc->max_phys_segs = 64;
-+ mmc->max_req_size = 32768 * 512;
-+ mmc->max_blk_size = 32768;
-+ mmc->max_blk_count = 512;
-+
-+ /* Assume card is present initially */
-+ set_bit(ATMCI_CARD_PRESENT, &slot->flags);
-+ if (gpio_is_valid(slot->detect_pin)) {
-+ if (gpio_request(slot->detect_pin, "mmc_detect")) {
-+ dev_dbg(&mmc->class_dev, "no detect pin available\n");
-+ slot->detect_pin = -EBUSY;
-+ } else if (gpio_get_value(slot->detect_pin)) {
-+ clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
-+ }
-+ }
-+
-+ if (!gpio_is_valid(slot->detect_pin))
-+ mmc->caps |= MMC_CAP_NEEDS_POLL;
-+
-+ if (gpio_is_valid(slot->wp_pin)) {
-+ if (gpio_request(slot->wp_pin, "mmc_wp")) {
-+ dev_dbg(&mmc->class_dev, "no WP pin available\n");
-+ slot->wp_pin = -EBUSY;
-+ }
-+ }
-+
-+ host->slot[id] = slot;
-+ mmc_add_host(mmc);
-+
-+ if (gpio_is_valid(slot->detect_pin)) {
-+ int ret;
-+
-+ setup_timer(&slot->detect_timer, atmci_detect_change,
-+ (unsigned long)slot);
-+
-+ ret = request_irq(gpio_to_irq(slot->detect_pin),
-+ atmci_detect_interrupt,
-+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-+ "mmc-detect", slot);
-+ if (ret) {
-+ dev_dbg(&mmc->class_dev,
-+ "could not request IRQ %d for detect pin\n",
-+ gpio_to_irq(slot->detect_pin));
-+ gpio_free(slot->detect_pin);
-+ slot->detect_pin = -EBUSY;
-+ }
-+ }
-+
-+ atmci_init_debugfs(slot);
-+
-+ return 0;
-+}
-+
-+static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot,
-+ unsigned int id)
-+{
-+ /* Debugfs stuff is cleaned up by mmc core */
-+
-+ set_bit(ATMCI_SHUTDOWN, &slot->flags);
-+ smp_wmb();
-+
-+ mmc_remove_host(slot->mmc);
-+
-+ if (gpio_is_valid(slot->detect_pin)) {
-+ int pin = slot->detect_pin;
-+
-+ free_irq(gpio_to_irq(pin), slot);
-+ del_timer_sync(&slot->detect_timer);
-+ gpio_free(pin);
-+ }
-+ if (gpio_is_valid(slot->wp_pin))
-+ gpio_free(slot->wp_pin);
-+
-+ slot->host->slot[id] = NULL;
-+ mmc_free_host(slot->mmc);
-+}
-+
- static int __init atmci_probe(struct platform_device *pdev)
- {
- struct mci_platform_data *pdata;
-- struct atmel_mci *host;
-- struct mmc_host *mmc;
-- struct resource *regs;
-- int irq;
-- int ret;
-+ struct atmel_mci *host;
-+ struct resource *regs;
-+ unsigned int nr_slots;
-+ int irq;
-+ int ret;
-
- regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!regs)
-@@ -1005,15 +1665,13 @@ static int __init atmci_probe(struct platform_device *pdev)
- if (irq < 0)
- return irq;
-
-- mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
-- if (!mmc)
-+ host = kzalloc(sizeof(struct atmel_mci), GFP_KERNEL);
-+ if (!host)
- return -ENOMEM;
-
-- host = mmc_priv(mmc);
- host->pdev = pdev;
-- host->mmc = mmc;
-- host->detect_pin = pdata->detect_pin;
-- host->wp_pin = pdata->wp_pin;
-+ spin_lock_init(&host->lock);
-+ INIT_LIST_HEAD(&host->queue);
-
- host->mck = clk_get(&pdev->dev, "mci_clk");
- if (IS_ERR(host->mck)) {
-@@ -1033,122 +1691,102 @@ static int __init atmci_probe(struct platform_device *pdev)
-
- host->mapbase = regs->start;
-
-- mmc->ops = &atmci_ops;
-- mmc->f_min = (host->bus_hz + 511) / 512;
-- mmc->f_max = host->bus_hz / 2;
-- mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-- mmc->caps |= MMC_CAP_4_BIT_DATA;
-+ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)host);
-
-- mmc->max_hw_segs = 64;
-- mmc->max_phys_segs = 64;
-- mmc->max_req_size = 32768 * 512;
-- mmc->max_blk_size = 32768;
-- mmc->max_blk_count = 512;
--
-- tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
--
-- ret = request_irq(irq, atmci_interrupt, 0, pdev->dev.bus_id, mmc);
-+ ret = request_irq(irq, atmci_interrupt, 0, pdev->dev.bus_id, host);
- if (ret)
- goto err_request_irq;
-
-- /* Assume card is present if we don't have a detect pin */
-- host->present = 1;
-- if (gpio_is_valid(host->detect_pin)) {
-- if (gpio_request(host->detect_pin, "mmc_detect")) {
-- dev_dbg(&mmc->class_dev, "no detect pin available\n");
-- host->detect_pin = -1;
-- } else {
-- host->present = !gpio_get_value(host->detect_pin);
-- }
-- }
-+#ifdef CONFIG_MMC_ATMELMCI_DMA
-+ if (pdata->dma_slave) {
-+ struct dma_slave *slave = pdata->dma_slave;
-
-- if (!gpio_is_valid(host->detect_pin))
-- mmc->caps |= MMC_CAP_NEEDS_POLL;
-+ slave->tx_reg = regs->start + MCI_TDR;
-+ slave->rx_reg = regs->start + MCI_RDR;
-
-- if (gpio_is_valid(host->wp_pin)) {
-- if (gpio_request(host->wp_pin, "mmc_wp")) {
-- dev_dbg(&mmc->class_dev, "no WP pin available\n");
-- host->wp_pin = -1;
-- }
-+ /* Try to grab a DMA channel */
-+ host->dma.client.event_callback = atmci_dma_event;
-+ dma_cap_set(DMA_SLAVE, host->dma.client.cap_mask);
-+ host->dma.client.slave = slave;
-+
-+ dma_async_client_register(&host->dma.client);
-+ dma_async_client_chan_request(&host->dma.client);
-+ } else {
-+ dev_notice(&pdev->dev, "DMA not available, using PIO\n");
- }
-+#endif /* CONFIG_MMC_ATMELMCI_DMA */
-
- platform_set_drvdata(pdev, host);
-
-- mmc_add_host(mmc);
--
-- if (gpio_is_valid(host->detect_pin)) {
-- setup_timer(&host->detect_timer, atmci_detect_change,
-- (unsigned long)host);
--
-- ret = request_irq(gpio_to_irq(host->detect_pin),
-- atmci_detect_interrupt,
-- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-- "mmc-detect", mmc);
-- if (ret) {
-- dev_dbg(&mmc->class_dev,
-- "could not request IRQ %d for detect pin\n",
-- gpio_to_irq(host->detect_pin));
-- gpio_free(host->detect_pin);
-- host->detect_pin = -1;
-- }
-+ /* We need at least one slot to succeed */
-+ nr_slots = 0;
-+ ret = -ENODEV;
-+ if (pdata->slot[0].bus_width) {
-+ ret = atmci_init_slot(host, &pdata->slot[0],
-+ MCI_SDCSEL_SLOT_A, 0);
-+ if (!ret)
-+ nr_slots++;
-+ }
-+ if (pdata->slot[1].bus_width) {
-+ ret = atmci_init_slot(host, &pdata->slot[1],
-+ MCI_SDCSEL_SLOT_B, 1);
-+ if (!ret)
-+ nr_slots++;
- }
-
-- dev_info(&mmc->class_dev,
-- "Atmel MCI controller at 0x%08lx irq %d\n",
-- host->mapbase, irq);
-+ if (!nr_slots)
-+ goto err_init_slot;
-
-- atmci_init_debugfs(host);
-+ dev_info(&pdev->dev,
-+ "Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
-+ host->mapbase, irq, nr_slots);
-
- return 0;
-
-+err_init_slot:
-+#ifdef CONFIG_MMC_ATMELMCI_DMA
-+ if (pdata->dma_slave)
-+ dma_async_client_unregister(&host->dma.client);
-+#endif
-+ free_irq(irq, host);
- err_request_irq:
- iounmap(host->regs);
- err_ioremap:
- clk_put(host->mck);
- err_clk_get:
-- mmc_free_host(mmc);
-+ kfree(host);
- return ret;
- }
-
- static int __exit atmci_remove(struct platform_device *pdev)
- {
-- struct atmel_mci *host = platform_get_drvdata(pdev);
-+ struct atmel_mci *host = platform_get_drvdata(pdev);
-+ unsigned int i;
-
- platform_set_drvdata(pdev, NULL);
-
-- if (host) {
-- /* Debugfs stuff is cleaned up by mmc core */
--
-- if (gpio_is_valid(host->detect_pin)) {
-- int pin = host->detect_pin;
--
-- /* Make sure the timer doesn't enable the interrupt */
-- host->detect_pin = -1;
-- smp_wmb();
--
-- free_irq(gpio_to_irq(pin), host->mmc);
-- del_timer_sync(&host->detect_timer);
-- gpio_free(pin);
-- }
--
-- mmc_remove_host(host->mmc);
-+ for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
-+ if (host->slot[i])
-+ atmci_cleanup_slot(host->slot[i], i);
-+ }
-
-- clk_enable(host->mck);
-- mci_writel(host, IDR, ~0UL);
-- mci_writel(host, CR, MCI_CR_MCIDIS);
-- mci_readl(host, SR);
-- clk_disable(host->mck);
-+ clk_enable(host->mck);
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CR, MCI_CR_MCIDIS);
-+ mci_readl(host, SR);
-+ clk_disable(host->mck);
-
-- if (gpio_is_valid(host->wp_pin))
-- gpio_free(host->wp_pin);
-+#ifdef CONFIG_MMC_ATMELMCI_DMA
-+ if (host->dma.client.slave)
-+ dma_async_client_unregister(&host->dma.client);
-+#endif
-
-- free_irq(platform_get_irq(pdev, 0), host->mmc);
-- iounmap(host->regs);
-+ free_irq(platform_get_irq(pdev, 0), host);
-+ iounmap(host->regs);
-
-- clk_put(host->mck);
-+ clk_put(host->mck);
-+ kfree(host);
-
-- mmc_free_host(host->mmc);
-- }
- return 0;
- }
-
-diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
-index 9e7a236..6033e74 100644
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -178,10 +178,18 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
- if (atmel_pri.Features & 0x02)
- extp->EraseSuspend = 2;
-
-- if (atmel_pri.BottomBoot)
-- extp->TopBottom = 2;
-- else
-- extp->TopBottom = 3;
-+ /* Some chips got it backwards... */
-+ if (cfi->id == AT49BV6416) {
-+ if (atmel_pri.BottomBoot)
-+ extp->TopBottom = 3;
-+ else
-+ extp->TopBottom = 2;
-+ } else {
-+ if (atmel_pri.BottomBoot)
-+ extp->TopBottom = 2;
-+ else
-+ extp->TopBottom = 3;
-+ }
-
- /* burst write mode not supported */
- cfi->cfiq->BufWriteTimeoutTyp = 0;
-diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
-index 3387e0d..4af80c0 100644
---- a/drivers/mtd/nand/atmel_nand.c
-+++ b/drivers/mtd/nand/atmel_nand.c
-@@ -500,7 +500,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
- platform_set_drvdata(pdev, host);
- atmel_nand_enable(host);
-
-- if (host->board->det_pin) {
-+ if (gpio_is_valid(host->board->det_pin)) {
- if (gpio_get_value(host->board->det_pin)) {
- printk("No SmartMedia card inserted.\n");
- res = ENXIO;
-diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
-index 9a9755c..13f4fb0 100644
---- a/drivers/rtc/Kconfig
-+++ b/drivers/rtc/Kconfig
-@@ -559,6 +559,22 @@ config RTC_DRV_AT91SAM9_GPBR
- will be used. The default of zero is normally OK to use, but
- on some systems other software needs to use that register.
-
-+config RTC_DRV_AVR32_AST
-+ tristate "AVR32 Asynchronous Timer"
-+ depends on AVR32
-+ help
-+ RTC driver for the AVR32 Asynchronous Timers. The AST is a
-+ simple and flexible timer that can be used both as a
-+ high-resolution system timer and an RTC, depending on what
-+ clock source it is running from.
-+
-+ If you say yes here, and add one or more platform_device
-+ called "rtc-ast", those devices will be clocked from a
-+ 32.768 kHz crystal oscillator and used as RTCs.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-ast.
-+
- config RTC_DRV_BFIN
- tristate "Blackfin On-Chip RTC"
- depends on BLACKFIN && !BF561
-diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
-index 18622ef..5ad1266 100644
---- a/drivers/rtc/Makefile
-+++ b/drivers/rtc/Makefile
-@@ -20,6 +20,7 @@ rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o
- obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
- obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
- obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o
-+obj-$(CONFIG_RTC_DRV_AVR32_AST) += rtc-ast.o
- obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o
- obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o
- obj-$(CONFIG_RTC_DRV_DS1216) += rtc-ds1216.o
-diff --git a/drivers/rtc/rtc-ast.c b/drivers/rtc/rtc-ast.c
-new file mode 100644
-index 0000000..be7db91
---- /dev/null
-+++ b/drivers/rtc/rtc-ast.c
-@@ -0,0 +1,546 @@
-+/*
-+ * An RTC driver for the AVR32 Asynchronous Timer
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/rtc.h>
-+
-+#include <asm/ast_regs.h>
-+
-+/*
-+ * The AST - ASynchronous Timer - is built around a simple cycle
-+ * counter that can be driven from one of four selectable clocks with
-+ * a selectable power-of-two prescaler. It also has two alarms (ALARM0
-+ * and ALARM1) and two periodic event generators (PER0 and PER1). The
-+ * latter can be driven by different tappings of the same prescaler
-+ * that drives the counter.
-+ *
-+ * This driver uses the 32.768 kHz crystal oscillator as a clock
-+ * source and a prescaler that gives a 1 Hz counter frequency. It uses
-+ * ALARM0 to support both "old-school" and "wake" alarms, PER0 to
-+ * support periodic interrupts (PIE) up to 16.384 kHz (at power-of-two
-+ * intervals), and PER1 to support a 1 Hz update interrupt (UIE).
-+ *
-+ * Watchdog interrupts seem to be undocumented and unsupported by
-+ * everyone else, so those are not supported for now.
-+ *
-+ * The AST can wake the system from any sleep mode given that the
-+ * source clock is running. On AT32AP720x, the 32.768 kHz crystal
-+ * oscillator runs in all sleep modes except "static" and "shutdown".
-+ */
-+
-+/* 32768 Hz means up to 60 us for synchronization + a bit of slack */
-+#define AST_SYNC_TIMEOUT_US 100
-+
-+#define AST_CLK_RATE 32768
-+#define AST_1S_PRESCALER 14 /* log2(32768) - 1 */
-+
-+struct rtc_ast {
-+ /* Protects I/O registers */
-+ spinlock_t lock;
-+
-+ struct rtc_device *rtc;
-+ void __iomem *regs;
-+ struct clk *osc32;
-+ struct clk *pclk;
-+};
-+
-+/*
-+ * Because the AST is, well, asynchronous, we must make sure we don't
-+ * write to certain registers while the previous write is being
-+ * synchronized between clock domains. This affects writes to CR, CV,
-+ * SCR, WER, PIRx and ARx. To keep the delays minimal, we always
-+ * synchronize _before_ writes to these registers.
-+ *
-+ * This function is also used to synchronize when changing the clock
-+ * source, using a different bit in the status register.
-+ */
-+static int ast_wait_ready(void __iomem *regs, unsigned int busy_mask)
-+{
-+ unsigned long timeout = AST_SYNC_TIMEOUT_US;
-+
-+ while (ast_readl(regs, SR) & busy_mask) {
-+ udelay(1);
-+ if (--timeout == 0)
-+ return -ETIMEDOUT;
-+ cpu_relax();
-+ }
-+
-+ return 0;
-+}
-+
-+static void rtc_ast_release(struct device *dev)
-+{
-+ struct rtc_ast *ast = dev_get_drvdata(dev);
-+
-+ /* Disable all interrupts */
-+ clk_enable(ast->pclk);
-+ ast_writel(ast->regs, IDR, ~0UL);
-+ clk_disable(ast->pclk);
-+}
-+
-+static int rtc_ast_ioctl(struct device *dev, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ struct rtc_ast *ast = dev_get_drvdata(dev);
-+ int ret = 0;
-+
-+ clk_enable(ast->pclk);
-+
-+ switch (cmd) {
-+ /* REVISIT: Should perhaps verify that irq_task is NULL */
-+ case RTC_AIE_ON:
-+ ast_writel(ast->regs, IER, AST_BIT(ALARM0));
-+ break;
-+ case RTC_AIE_OFF:
-+ ast_writel(ast->regs, IDR, AST_BIT(ALARM0));
-+ break;
-+ case RTC_UIE_ON:
-+ spin_lock_irq(&ast->lock);
-+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ if (!ret) {
-+ ast_writel(ast->regs, SCR, AST_BIT(PER1));
-+ ast_writel(ast->regs, IER, AST_BIT(PER1));
-+ }
-+ spin_unlock_irq(&ast->lock);
-+
-+ break;
-+ case RTC_UIE_OFF:
-+ ast_writel(ast->regs, IDR, AST_BIT(PER1));
-+ break;
-+#if 0
-+ case RTC_PIE_ON:
-+ spin_lock_irq(&ast->lock);
-+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ if (ret)
-+ break;
-+ ast_writel(ast->regs, SCR, AST_BIT(PER0));
-+ spin_unlock_irq(&ast->lock);
-+
-+ ast_writel(ast->regs, IER, AST_BIT(PER0));
-+ break;
-+ case RTC_PIE_OFF:
-+ ast_writel(ast->regs, IDR, AST_BIT(PER1));
-+ break;
-+#endif
-+ default:
-+ ret = -ENOIOCTLCMD;
-+ break;
-+ }
-+
-+ clk_disable(ast->pclk);
-+
-+ return ret;
-+}
-+
-+static int rtc_ast_read_time(struct device *dev, struct rtc_time *tm)
-+{
-+ struct rtc_ast *ast = dev_get_drvdata(dev);
-+
-+ clk_enable(ast->pclk);
-+ rtc_time_to_tm(ast_readl(ast->regs, CV), tm);
-+ clk_disable(ast->pclk);
-+
-+ return 0;
-+}
-+
-+static int rtc_ast_set_mmss(struct device *dev, unsigned long secs)
-+{
-+ struct rtc_ast *ast = dev_get_drvdata(dev);
-+ int ret;
-+
-+ clk_enable(ast->pclk);
-+
-+ spin_lock_irq(&ast->lock);
-+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ if (!ret)
-+ ast_writel(ast->regs, CV, secs);
-+ spin_unlock_irq(&ast->lock);
-+
-+ clk_disable(ast->pclk);
-+
-+ return ret;
-+}
-+
-+static int rtc_ast_set_time(struct device *dev, struct rtc_time *tm)
-+{
-+ unsigned long secs;
-+ int ret;
-+
-+ ret = rtc_tm_to_time(tm, &secs);
-+ if (!ret)
-+ ret = rtc_ast_set_mmss(dev, secs);
-+
-+ return ret;
-+}
-+
-+static int rtc_ast_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+ struct rtc_ast *ast = dev_get_drvdata(dev);
-+
-+ clk_enable(ast->pclk);
-+
-+ spin_lock_irq(&ast->lock);
-+ rtc_time_to_tm(ast_readl(ast->regs, AR0), &alrm->time);
-+ alrm->enabled = !!(ast_readl(ast->regs, IMR) & AST_BIT(ALARM0));
-+ alrm->pending = !!(ast_readl(ast->regs, SR) & AST_BIT(ALARM0));
-+ spin_unlock_irq(&ast->lock);
-+
-+ clk_disable(ast->pclk);
-+
-+ return 0;
-+}
-+
-+static int rtc_ast_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+ struct rtc_ast *ast = dev_get_drvdata(dev);
-+ unsigned long seconds;
-+ int ret;
-+
-+ ret = rtc_tm_to_time(&alrm->time, &seconds);
-+ if (ret)
-+ return ret;
-+
-+ clk_enable(ast->pclk);
-+
-+ /*
-+ * REVISIT: The alarm may trigger before we are done here.
-+ * Who's responsible for handling that?
-+ *
-+ * We don't want to clear the ALARM0 flag before we update AR0
-+ * because the previous value of AR0 might trigger an alarm
-+ * right after we clear the flag.
-+ */
-+ spin_lock_irq(&ast->lock);
-+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ if (ret)
-+ goto unlock;
-+ ast_writel(ast->regs, AR0, seconds);
-+
-+ /* Try to avoid synchronization penalty */
-+ if (ast_readl(ast->regs, SR) & AST_BIT(ALARM0)) {
-+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ if (ret)
-+ goto unlock;
-+ ast_writel(ast->regs, SCR, AST_BIT(ALARM0));
-+ }
-+
-+ if (alrm->enabled)
-+ ast_writel(ast->regs, IER, AST_BIT(ALARM0));
-+
-+unlock:
-+ spin_unlock_irq(&ast->lock);
-+ clk_disable(ast->pclk);
-+
-+ return ret;
-+}
-+
-+static int rtc_ast_proc(struct device *dev, struct seq_file *seq)
-+{
-+ struct rtc_ast *ast = dev_get_drvdata(dev);
-+ u32 imr;
-+
-+ clk_enable(ast->pclk);
-+ imr = ast_readl(ast->regs, IMR);
-+ clk_disable(ast->pclk);
-+
-+ return seq_printf(seq,
-+ "periodic_IRQ\t: %s\n"
-+ "update_IRQ\t: %s\n"
-+ "periodic_freq\t: %d\n",
-+ (imr & AST_BIT(PER0)) ? "yes" : "no",
-+ (imr & AST_BIT(PER1)) ? "yes" : "no",
-+ ast->rtc->irq_freq);
-+}
-+
-+static int rtc_ast_irq_set_freq(struct device *dev, int freq)
-+{
-+ struct rtc_ast *ast = dev_get_drvdata(dev);
-+ unsigned int pres_bit;
-+ int ret;
-+
-+ /* RTC core currently ensures this. */
-+ BUG_ON(!freq);
-+
-+ pres_bit = __ffs(freq);
-+ if (pres_bit > AST_1S_PRESCALER)
-+ return -EINVAL;
-+ pres_bit = AST_1S_PRESCALER - pres_bit;
-+
-+ clk_enable(ast->pclk);
-+
-+ spin_lock_irq(&ast->lock);
-+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ if (ret)
-+ goto unlock;
-+
-+ ast_writel(ast->regs, PIR0, pres_bit);
-+
-+unlock:
-+ spin_unlock_irq(&ast->lock);
-+ clk_disable(ast->pclk);
-+
-+ return ret;
-+}
-+
-+static int rtc_ast_irq_set_state(struct device *dev, int enabled)
-+{
-+ struct rtc_ast *ast = dev_get_drvdata(dev);
-+ int ret = 0;
-+
-+ clk_enable(ast->pclk);
-+
-+ if (enabled) {
-+ spin_lock_irq(&ast->lock);
-+ ret = ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ if (!ret) {
-+ ast_writel(ast->regs, SCR, AST_BIT(PER0));
-+ ast_writel(ast->regs, IER, AST_BIT(PER0));
-+ }
-+ spin_unlock_irq(&ast->lock);
-+ } else {
-+ ast_writel(ast->regs, IDR, AST_BIT(PER1));
-+ }
-+
-+ clk_disable(ast->pclk);
-+
-+ return ret;
-+}
-+
-+static const struct rtc_class_ops rtc_ast_ops = {
-+ .release = rtc_ast_release,
-+ .ioctl = rtc_ast_ioctl,
-+ .read_time = rtc_ast_read_time,
-+ .set_time = rtc_ast_set_time,
-+ .read_alarm = rtc_ast_read_alarm,
-+ .set_alarm = rtc_ast_set_alarm,
-+ .proc = rtc_ast_proc,
-+ .set_mmss = rtc_ast_set_mmss,
-+ .irq_set_freq = rtc_ast_irq_set_freq,
-+ .irq_set_state = rtc_ast_irq_set_state,
-+};
-+
-+static irqreturn_t rtc_ast_interrupt(int irq, void *dev_id)
-+{
-+ struct rtc_ast *ast = dev_id;
-+ unsigned long events;
-+ unsigned long num;
-+ u32 status;
-+ u32 pending;
-+ irqreturn_t ret = IRQ_NONE;
-+
-+ clk_enable(ast->pclk);
-+ spin_lock(&ast->lock);
-+
-+ status = ast_readl(ast->regs, SR);
-+ pending = status & ast_readl(ast->regs, IMR);
-+ if (unlikely(!pending))
-+ goto out;
-+
-+ ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ ast_writel(ast->regs, SCR, pending);
-+
-+ events = RTC_IRQF;
-+ num = 0;
-+ if (pending & AST_BIT(ALARM0)) {
-+ num++;
-+ events |= RTC_AF;
-+ }
-+ if (pending & AST_BIT(PER0)) {
-+ num++;
-+ events |= RTC_PF;
-+ }
-+ if (pending & AST_BIT(PER1)) {
-+ num++;
-+ events |= RTC_UF;
-+ }
-+
-+ rtc_update_irq(ast->rtc, num, events);
-+ ret = IRQ_HANDLED;
-+
-+out:
-+ spin_unlock(&ast->lock);
-+ clk_disable(ast->pclk);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init rtc_ast_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs;
-+ struct rtc_ast *ast;
-+ int irq;
-+ int ret;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_dbg(&pdev->dev, "no mmio resource\n");
-+ return -ENXIO;
-+ }
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_dbg(&pdev->dev, "no irq\n");
-+ return -ENXIO;
-+ }
-+
-+ ast = kzalloc(sizeof(struct rtc_ast), GFP_KERNEL);
-+ if (!ast) {
-+ dev_dbg(&pdev->dev, "out of memory\n");
-+ return -ENOMEM;
-+ }
-+
-+ ast->osc32 = clk_get(NULL, "osc32k");
-+ if (IS_ERR(ast->osc32)) {
-+ ret = PTR_ERR(ast->osc32);
-+ dev_dbg(&pdev->dev, "no 32 kHz oscillator\n");
-+ goto err_osc32;
-+ }
-+
-+ ast->pclk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(ast->pclk)) {
-+ ret = PTR_ERR(ast->pclk);
-+ dev_dbg(&pdev->dev, "no peripheral clock\n");
-+ goto err_pclk;
-+ }
-+
-+ spin_lock_init(&ast->lock);
-+
-+ ast->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!ast->regs) {
-+ dev_dbg(&pdev->dev, "failed to map registers\n");
-+ ret = -ENOMEM;
-+ goto err_ioremap;
-+ }
-+
-+ clk_enable(ast->osc32);
-+ clk_enable(ast->pclk);
-+
-+ /* Initialize the AST if it isn't running already */
-+ if (!(ast_readl(ast->regs, CR) & AST_BIT(CR_EN))) {
-+ ast_wait_ready(ast->regs, AST_BIT(CLK_BUSY));
-+ ast_writel(ast->regs, CLOCK,
-+ AST_BF(CLOCK_CSSEL, AST_CLOCK_OSC32)
-+ | AST_BIT(CLOCK_CEN));
-+ ret = ast_wait_ready(ast->regs, AST_BIT(CLK_BUSY));
-+ if (ret) {
-+ dev_dbg(&pdev->dev,
-+ "timed out selecting clock source\n");
-+ goto err_clksel;
-+ }
-+ ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ ast_writel(ast->regs, CV, 0);
-+ ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ ast_writel(ast->regs, CR, AST_BIT(CR_EN) | AST_BIT(CR_PCLR)
-+ | AST_BF(CR_PSEL, AST_1S_PRESCALER));
-+ }
-+
-+ ast_writel(ast->regs, IDR, ~0UL);
-+ ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ ast_writel(ast->regs, WER, 0);
-+ ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ ast_writel(ast->regs, PIR0, AST_1S_PRESCALER);
-+ ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ ast_writel(ast->regs, PIR1, AST_1S_PRESCALER);
-+
-+ ret = request_irq(irq, rtc_ast_interrupt, 0, "rtc-ast", ast);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "could not request irq %d\n", irq);
-+ goto err_request_irq;
-+ }
-+
-+ ast->rtc = rtc_device_register("rtc-ast", &pdev->dev,
-+ &rtc_ast_ops, THIS_MODULE);
-+ if (IS_ERR(ast->rtc)) {
-+ dev_dbg(&pdev->dev, "could not register rtc device\n");
-+ ret = PTR_ERR(ast->rtc);
-+ goto err_register;
-+ }
-+
-+ ast->rtc->max_user_freq = AST_CLK_RATE / 2;
-+ ast->rtc->irq_freq = 1;
-+
-+ ast_wait_ready(ast->regs, AST_BIT(BUSY));
-+ clk_disable(ast->pclk);
-+ platform_set_drvdata(pdev, ast);
-+ device_init_wakeup(&pdev->dev, 1);
-+
-+ dev_info(&pdev->dev, "AVR32 Asynchronous Timer at %08lx irq %d\n",
-+ (unsigned long)regs->start, irq);
-+
-+ return 0;
-+
-+err_register:
-+ free_irq(irq, ast);
-+err_request_irq:
-+err_clksel:
-+ clk_disable(ast->pclk);
-+ clk_disable(ast->osc32);
-+ iounmap(ast->regs);
-+err_ioremap:
-+ clk_put(ast->pclk);
-+err_pclk:
-+ clk_put(ast->osc32);
-+err_osc32:
-+ kfree(ast);
-+ return ret;
-+}
-+
-+static int __exit rtc_ast_remove(struct platform_device *pdev)
-+{
-+ struct rtc_ast *ast = platform_get_drvdata(pdev);
-+
-+ device_init_wakeup(&pdev->dev, 0);
-+
-+ clk_enable(ast->pclk);
-+ ast_writel(ast->regs, IDR, ~0UL);
-+ ast_readl(ast->regs, IMR);
-+ clk_disable(ast->pclk);
-+
-+ free_irq(platform_get_irq(pdev, 0), ast);
-+ rtc_device_unregister(ast->rtc);
-+ clk_disable(ast->osc32);
-+ iounmap(ast->regs);
-+ clk_put(ast->pclk);
-+ clk_put(ast->osc32);
-+ kfree(ast);
-+
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver rtc_ast_driver = {
-+ .remove = __exit_p(rtc_ast_remove),
-+ .driver = {
-+ .name = "rtc-ast",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init rtc_ast_init(void)
-+{
-+ return platform_driver_probe(&rtc_ast_driver, rtc_ast_probe);
-+}
-+module_init(rtc_ast_init);
-+
-+static void __exit rtc_ast_exit(void)
-+{
-+ platform_driver_unregister(&rtc_ast_driver);
-+}
-+module_exit(rtc_ast_exit);
-+
-+MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("AVR32 Asynchronous Timer RTC");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
-index b9d0efb..ebfb883 100644
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -53,9 +53,14 @@ if SPI_MASTER
-
- comment "SPI Master Controller Drivers"
-
-+config SPI_ATMEL_HAVE_PDC
-+ def_bool y
-+ depends on (ARCH_AT91 || CPU_AT32AP700X)
-+
- config SPI_ATMEL
- tristate "Atmel SPI Controller"
- depends on (ARCH_AT91 || AVR32)
-+ depends on SPI_ATMEL_HAVE_PDC || DMA_ENGINE
- help
- This selects a driver for the Atmel SPI Controller, present on
- many AT32 (AVR32) and AT91 (ARM) chips.
-diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
-index 02f9320..5afae71 100644
---- a/drivers/spi/atmel_spi.c
-+++ b/drivers/spi/atmel_spi.c
-@@ -1,306 +1,445 @@
- /*
- * Driver for Atmel AT32 and AT91 SPI Controllers
- *
-- * Copyright (C) 2006 Atmel Corporation
-+ * Copyright (C) 2006-2008 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
--#include <linux/kernel.h>
--#include <linux/init.h>
- #include <linux/clk.h>
--#include <linux/module.h>
--#include <linux/platform_device.h>
- #include <linux/delay.h>
- #include <linux/dma-mapping.h>
-+#include <linux/dmaengine.h>
- #include <linux/err.h>
-+#include <linux/gpio.h>
-+#include <linux/init.h>
- #include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/wait.h>
-+#include <linux/workqueue.h>
-+#include <linux/spi/atmel_spi.h>
- #include <linux/spi/spi.h>
-
--#include <asm/io.h>
--#include <mach/board.h>
--#include <mach/gpio.h>
- #include <mach/cpu.h>
-
- #include "atmel_spi.h"
-
--/*
-- * The core SPI transfer engine just talks to a register bank to set up
-- * DMA transfers; transfer queue progress is driven by IRQs. The clock
-- * framework provides the base clock, subdivided for each spi_device.
-- *
-- * Newer controllers, marked with "new_1" flag, have:
-- * - CR.LASTXFER
-- * - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero)
-- * - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs)
-- * - SPI_CSRx.CSAAT
-- * - SPI_CSRx.SBCR allows faster clocking
-+#define BUFFER_SIZE PAGE_SIZE
-+#define INVALID_DMA_ADDRESS 0xffffffff
-+#define MAX_SG_SEGS 8
-+
-+/**
-+ * struct atmel_spi - SPI master controller state
-+ * @lock: Spinlock protecting the @queue, @stay and @stopping fields
-+ * as well as the hardware registers.
-+ * @regs: Base address of the hardware registers.
-+ * @wait: Waitqueue used to wait for DMA completion or errors.
-+ * @pending: Number of DMA transfers currently pending.
-+ * @pending_bytes: Number of bytes submitted for DMA but not yet
-+ * accounted for.
-+ * @error: Data transfer error detected by interrupt handler. When this
-+ * is set to a nonzero value, the DMA engine is stopped, @pending
-+ * is set to 0 and @wait is triggered.
-+ * @buffer: Scratch buffer for use when the upper layers didn't provide
-+ * a TX or RX buffer.
-+ * @buffer_dma: DMA address of @buffer.
-+ * @buffer_size: Length of @buffer in bytes.
-+ * @queue: SPI messages queued for transfer.
-+ * @workqueue: Per-controller workqueue.
-+ * @work: Queue processing work struct.
-+ * @stay: If the last SPI message caused the SPI device to stay active,
-+ * this points to the SPI device associated with that message. NULL
-+ * otherwise.
-+ * @clk: Bus clock connected to the controller.
-+ * @base_hz: Base clock rate in Hz used for baud rate calculations.
-+ * @stopping: Queue is being stopped. No new messages are started.
-+ * @always_bounce: Always do transfers to/from bounce buffer.
-+ * @pdev: Platform device associated with the controller.
- */
- struct atmel_spi {
- spinlock_t lock;
--
- void __iomem *regs;
-- int irq;
-- struct clk *clk;
-- struct platform_device *pdev;
-- unsigned new_1:1;
-- struct spi_device *stay;
-
-- u8 stopping;
-- struct list_head queue;
-- struct spi_transfer *current_transfer;
-- unsigned long current_remaining_bytes;
-- struct spi_transfer *next_transfer;
-- unsigned long next_remaining_bytes;
-+ wait_queue_head_t wait;
-+ int pending;
-+ size_t pending_bytes;
-+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
-+ struct scatterlist tx_sg[MAX_SG_SEGS];
-+ struct scatterlist rx_sg[MAX_SG_SEGS];
-+ unsigned int sg_len;
-+ struct dma_async_tx_descriptor *tx_desc;
-+ struct dma_async_tx_descriptor *rx_desc;
-+ struct dma_chan *tx_chan;
-+ struct dma_chan *rx_chan;
-+ struct dma_client rx_client;
-+ struct dma_client tx_client;
-+#endif
-+ int error;
-
- void *buffer;
- dma_addr_t buffer_dma;
-+ size_t buffer_size;
-+
-+ struct list_head queue;
-+ struct workqueue_struct *workqueue;
-+ struct work_struct work;
-+ struct spi_device *stay;
-+ struct clk *clk;
-+ unsigned long base_hz;
-+ bool stopping;
-+ bool always_bounce;
-+
-+ struct platform_device *pdev;
-+#ifdef CONFIG_DEBUG_FS
-+ struct dentry *debugfs_root;
-+#endif
- };
-
--#define BUFFER_SIZE PAGE_SIZE
--#define INVALID_DMA_ADDRESS 0xffffffff
-+/**
-+ * struct atmel_spi_device - Controller-specific per-slave state
-+ * @npcs_pin: GPIO pin ID hooked up to this SPI slave.
-+ * @csr: CSRn register value used when talking to this SPI slave.
-+ */
-+struct atmel_spi_device {
-+ unsigned int npcs_pin;
-+ u32 csr;
-+};
-
- /*
-- * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby
-- * they assume that spi slave device state will not change on deselect, so
-- * that automagic deselection is OK. ("NPCSx rises if no data is to be
-- * transmitted") Not so! Workaround uses nCSx pins as GPIOs; or newer
-- * controllers have CSAAT and friends.
-- *
-- * Since the CSAAT functionality is a bit weird on newer controllers as
-- * well, we use GPIO to control nCSx pins on all controllers, updating
-- * MR.PCS to avoid confusing the controller. Using GPIOs also lets us
-- * support active-high chipselects despite the controller's belief that
-- * only active-low devices/systems exists.
-+ * Version 2 of the SPI controller has
-+ * - CR.LASTXFER
-+ * - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero)
-+ * - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs)
-+ * - SPI_CSRx.CSAAT
-+ * - SPI_CSRx.SBCR allows faster clocking
- *
-- * However, at91rm9200 has a second erratum whereby nCS0 doesn't work
-- * right when driven with GPIO. ("Mode Fault does not allow more than one
-- * Master on Chip Select 0.") No workaround exists for that ... so for
-- * nCS0 on that chip, we (a) don't use the GPIO, (b) can't support CS_HIGH,
-- * and (c) will trigger that first erratum in some cases.
-+ * We can determine the controller version by reading the VERSION
-+ * register, but I haven't checked that it exists on all chips, and
-+ * this is cheaper anyway.
- */
--
--static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
-+static bool atmel_spi_is_v2(void)
- {
-- unsigned gpio = (unsigned) spi->controller_data;
-- unsigned active = spi->mode & SPI_CS_HIGH;
-- u32 mr;
-- int i;
-- u32 csr;
-- u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0;
-+ return !cpu_is_at91rm9200();
-+}
-
-- /* Make sure clock polarity is correct */
-- for (i = 0; i < spi->master->num_chipselect; i++) {
-- csr = spi_readl(as, CSR0 + 4 * i);
-- if ((csr ^ cpol) & SPI_BIT(CPOL))
-- spi_writel(as, CSR0 + 4 * i, csr ^ SPI_BIT(CPOL));
-- }
-+static bool atmel_spi_xfer_is_last(struct spi_message *msg,
-+ struct spi_transfer *xfer)
-+{
-+ return &xfer->transfer_list == msg->transfers.prev;
-+}
-
-- mr = spi_readl(as, MR);
-- mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr);
-+/*-------------------------------------------------------------------------*/
-
-- dev_dbg(&spi->dev, "activate %u%s, mr %08x\n",
-- gpio, active ? " (high)" : "",
-- mr);
-+/*
-+ * GCC doesn't eliminate _all_ the dead code, only some of it. In
-+ * particular, the file operations appear to be difficult even if the
-+ * file operations struct itself gets eliminated.
-+ *
-+ * So let's do the CPP dance.
-+ */
-+#ifdef CONFIG_DEBUG_FS
-
-- if (!(cpu_is_at91rm9200() && spi->chip_select == 0))
-- gpio_set_value(gpio, active);
-- spi_writel(as, MR, mr);
--}
-+#include <linux/debugfs.h>
-+#include <linux/seq_file.h>
-
--static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
-+static int atmel_spi_queue_show(struct seq_file *s, void *v)
- {
-- unsigned gpio = (unsigned) spi->controller_data;
-- unsigned active = spi->mode & SPI_CS_HIGH;
-- u32 mr;
-+ struct atmel_spi *as = s->private;
-+ struct spi_message *msg;
-+ struct spi_transfer *xfer;
-
-- /* only deactivate *this* device; sometimes transfers to
-- * another device may be active when this routine is called.
-- */
-- mr = spi_readl(as, MR);
-- if (~SPI_BFEXT(PCS, mr) & (1 << spi->chip_select)) {
-- mr = SPI_BFINS(PCS, 0xf, mr);
-- spi_writel(as, MR, mr);
-+ spin_lock_irq(&as->lock);
-+ list_for_each_entry(msg, &as->queue, queue) {
-+ seq_printf(s, "msg to %s:%s DMA mapped, status %d actual %u\n",
-+ msg->spi->dev.bus_id,
-+ msg->is_dma_mapped ? "" : " Not",
-+ msg->status, msg->actual_length);
-+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
-+ seq_printf(s, " t%p r%p l%u%s %u bits %u us %u Hz\n",
-+ xfer->tx_buf, xfer->rx_buf, xfer->len,
-+ xfer->cs_change ? "cs_change" : "",
-+ xfer->bits_per_word,
-+ xfer->delay_usecs,
-+ xfer->speed_hz);
-+ }
- }
-+ spin_unlock_irq(&as->lock);
-
-- dev_dbg(&spi->dev, "DEactivate %u%s, mr %08x\n",
-- gpio, active ? " (low)" : "",
-- mr);
--
-- if (!(cpu_is_at91rm9200() && spi->chip_select == 0))
-- gpio_set_value(gpio, !active);
-+ return 0;
- }
-
--static inline int atmel_spi_xfer_is_last(struct spi_message *msg,
-- struct spi_transfer *xfer)
-+static int atmel_spi_queue_open(struct inode *inode, struct file *file)
- {
-- return msg->transfers.prev == &xfer->transfer_list;
-+ return single_open(file, atmel_spi_queue_show, inode->i_private);
- }
-
--static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer)
-+static const struct file_operations atmel_spi_queue_fops = {
-+ .owner = THIS_MODULE,
-+ .open = atmel_spi_queue_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = single_release,
-+};
-+
-+static void atmel_spi_show_status_reg(struct seq_file *s,
-+ const char *regname, u32 value)
- {
-- return xfer->delay_usecs == 0 && !xfer->cs_change;
-+ static const char *sr_bit[] = {
-+ [0] = "RDRF",
-+ [1] = "TDRE",
-+ [2] = "MODF",
-+ [3] = "OVRES",
-+ [4] = "ENDRX",
-+ [5] = "ENDTX",
-+ [6] = "RXBUFF",
-+ [7] = "TXBUFE",
-+ [8] = "NSSR",
-+ [9] = "TXEMPTY",
-+ [16] = "SPIENS",
-+ };
-+ unsigned int i;
-+
-+ seq_printf(s, "%s:\t0x%08x", regname, value);
-+ for (i = 0; i < ARRAY_SIZE(sr_bit); i++) {
-+ if (value & (1 << i)) {
-+ if (sr_bit[i])
-+ seq_printf(s, " %s", sr_bit[i]);
-+ else
-+ seq_printf(s, " UNKNOWN(%u)", i);
-+ }
-+ }
-+ seq_putc(s, '\n');
- }
-
--static void atmel_spi_next_xfer_data(struct spi_master *master,
-- struct spi_transfer *xfer,
-- dma_addr_t *tx_dma,
-- dma_addr_t *rx_dma,
-- u32 *plen)
-+static int atmel_spi_regs_show(struct seq_file *s, void *v)
- {
-- struct atmel_spi *as = spi_master_get_devdata(master);
-- u32 len = *plen;
-+ struct atmel_spi *as = s->private;
-+ unsigned int i;
-+ u32 value;
-+ u32 *buf;
-
-- /* use scratch buffer only when rx or tx data is unspecified */
-- if (xfer->rx_buf)
-- *rx_dma = xfer->rx_dma + xfer->len - len;
-- else {
-- *rx_dma = as->buffer_dma;
-- if (len > BUFFER_SIZE)
-- len = BUFFER_SIZE;
-- }
-- if (xfer->tx_buf)
-- *tx_dma = xfer->tx_dma + xfer->len - len;
-- else {
-- *tx_dma = as->buffer_dma;
-- if (len > BUFFER_SIZE)
-- len = BUFFER_SIZE;
-- memset(as->buffer, 0, len);
-- dma_sync_single_for_device(&as->pdev->dev,
-- as->buffer_dma, len, DMA_TO_DEVICE);
-- }
-+ buf = kmalloc(0x200, GFP_KERNEL);
-+ if (!buf)
-+ return -ENOMEM;
-
-- *plen = len;
--}
-+ /* Grab a more or less consistent snapshot */
-+ spin_lock_irq(&as->lock);
-+ memcpy_fromio(buf, as->regs, 0x200);
-+ spin_unlock_irq(&as->lock);
-
--/*
-- * Submit next transfer for DMA.
-- * lock is held, spi irq is blocked
-- */
--static void atmel_spi_next_xfer(struct spi_master *master,
-- struct spi_message *msg)
--{
-- struct atmel_spi *as = spi_master_get_devdata(master);
-- struct spi_transfer *xfer;
-- u32 len, remaining;
-- u32 ieval;
-- dma_addr_t tx_dma, rx_dma;
--
-- if (!as->current_transfer)
-- xfer = list_entry(msg->transfers.next,
-- struct spi_transfer, transfer_list);
-- else if (!as->next_transfer)
-- xfer = list_entry(as->current_transfer->transfer_list.next,
-- struct spi_transfer, transfer_list);
-- else
-- xfer = NULL;
-+ value = buf[SPI_MR / 4];
-+ seq_printf(s, "MR:\t0x%08x%s%s%s%s%s%s PCS=%x DLYBCS=%u\n",
-+ value,
-+ (value & SPI_BIT(MSTR)) ? " MSTR" : "",
-+ (value & SPI_BIT(PS)) ? " PS" : "",
-+ (value & SPI_BIT(PCSDEC)) ? " PCSDEC" : "",
-+ (value & SPI_BIT(FDIV)) ? " FDIV" : "",
-+ (value & SPI_BIT(MODFDIS)) ? " MODFDIS" : "",
-+ (value & SPI_BIT(LLB)) ? " LLB" : "",
-+ SPI_BFEXT(PCS, value),
-+ SPI_BFEXT(DLYBCS, value));
-+
-+ atmel_spi_show_status_reg(s, "SR", buf[SPI_SR / 4]);
-+ atmel_spi_show_status_reg(s, "IMR", buf[SPI_IMR / 4]);
-+
-+ for (i = 0; i < 4; i++) {
-+ value = buf[SPI_CSR0 / 4 + i];
-+ seq_printf(s, "CSR%u:\t0x%08x%s%s%s\n",
-+ i, value,
-+ (value & SPI_BIT(CPOL)) ? " CPOL" : "",
-+ (value & SPI_BIT(NCPHA)) ? " NCPHA" : "",
-+ (value & SPI_BIT(CSAAT)) ? " CSAAT" : "");
-+ seq_printf(s, "\t\tBITS=%u SCBR=%u DLYBS=%u DLYBCT=%u\n",
-+ SPI_BFEXT(BITS, value) + 8,
-+ SPI_BFEXT(SCBR, value),
-+ SPI_BFEXT(DLYBS, value),
-+ SPI_BFEXT(DLYBCT, value));
-+ }
-
-- if (xfer) {
-- spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
-+ seq_printf(s, "RPR:\t0x%08x\n", buf[SPI_RPR / 4]);
-+ seq_printf(s, "RCR:\t0x%08x\n", buf[SPI_RCR / 4]);
-+ seq_printf(s, "TPR:\t0x%08x\n", buf[SPI_TPR / 4]);
-+ seq_printf(s, "TCR:\t0x%08x\n", buf[SPI_TCR / 4]);
-+ seq_printf(s, "RNPR:\t0x%08x\n", buf[SPI_RNPR / 4]);
-+ seq_printf(s, "RNCR:\t0x%08x\n", buf[SPI_RNCR / 4]);
-+ seq_printf(s, "TNPR:\t0x%08x\n", buf[SPI_TNPR / 4]);
-+ seq_printf(s, "TNCR:\t0x%08x\n", buf[SPI_TNCR / 4]);
-
-- len = xfer->len;
-- atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
-- remaining = xfer->len - len;
-+ value = buf[SPI_PTSR / 4];
-+ seq_printf(s, "PTSR:\t0x%08x%s%s\n", value,
-+ (value & SPI_BIT(RXTEN)) ? " RXTEN" : "",
-+ (value & SPI_BIT(TXTEN)) ? " TXTEN" : "");
-
-- spi_writel(as, RPR, rx_dma);
-- spi_writel(as, TPR, tx_dma);
-+ kfree(buf);
-
-- if (msg->spi->bits_per_word > 8)
-- len >>= 1;
-- spi_writel(as, RCR, len);
-- spi_writel(as, TCR, len);
-+ return 0;
-+}
-
-- dev_dbg(&msg->spi->dev,
-- " start xfer %p: len %u tx %p/%08x rx %p/%08x\n",
-- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
-- xfer->rx_buf, xfer->rx_dma);
-- } else {
-- xfer = as->next_transfer;
-- remaining = as->next_remaining_bytes;
-- }
-+static int atmel_spi_regs_open(struct inode *inode, struct file *file)
-+{
-+ return single_open(file, atmel_spi_regs_show, inode->i_private);
-+}
-
-- as->current_transfer = xfer;
-- as->current_remaining_bytes = remaining;
-+static const struct file_operations atmel_spi_regs_fops = {
-+ .owner = THIS_MODULE,
-+ .open = atmel_spi_regs_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = single_release,
-+};
-
-- if (remaining > 0)
-- len = remaining;
-- else if (!atmel_spi_xfer_is_last(msg, xfer)
-- && atmel_spi_xfer_can_be_chained(xfer)) {
-- xfer = list_entry(xfer->transfer_list.next,
-- struct spi_transfer, transfer_list);
-- len = xfer->len;
-- } else
-- xfer = NULL;
-+static void atmel_spi_init_debugfs(struct atmel_spi *as)
-+{
-+ struct dentry *root;
-+ struct dentry *node;
-
-- as->next_transfer = xfer;
-+ root = debugfs_create_dir(as->pdev->dev.bus_id, NULL);
-+ if (IS_ERR(root))
-+ /* Debugfs not enabled */
-+ return;
-+ if (!root)
-+ /* Debugfs enabled, but failed to create directory */
-+ goto err_root;
-+
-+ node = debugfs_create_file("regs", S_IRUSR, root, as,
-+ &atmel_spi_regs_fops);
-+ if (!node)
-+ goto err;
-+ node = debugfs_create_file("queue", S_IRUSR, root, as,
-+ &atmel_spi_queue_fops);
-+ if (!node)
-+ goto err;
-+
-+ as->debugfs_root = root;
-+ return;
-+
-+err:
-+ debugfs_remove_recursive(root);
-+err_root:
-+ dev_err(&as->pdev->dev, "failed to initialize debugfs\n");
-+}
-
-- if (xfer) {
-- u32 total;
-+static void atmel_spi_cleanup_debugfs(struct atmel_spi *as)
-+{
-+ debugfs_remove_recursive(as->debugfs_root);
-+}
-
-- total = len;
-- atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
-- as->next_remaining_bytes = total - len;
-+#else
-+static void atmel_spi_init_debugfs(struct atmel_spi *as)
-+{
-
-- spi_writel(as, RNPR, rx_dma);
-- spi_writel(as, TNPR, tx_dma);
-+}
-+static void atmel_spi_cleanup_debugfs(struct atmel_spi *as)
-+{
-
-- if (msg->spi->bits_per_word > 8)
-- len >>= 1;
-- spi_writel(as, RNCR, len);
-- spi_writel(as, TNCR, len);
-+}
-+#endif
-
-- dev_dbg(&msg->spi->dev,
-- " next xfer %p: len %u tx %p/%08x rx %p/%08x\n",
-- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
-- xfer->rx_buf, xfer->rx_dma);
-- ieval = SPI_BIT(ENDRX) | SPI_BIT(OVRES);
-- } else {
-- spi_writel(as, RNCR, 0);
-- spi_writel(as, TNCR, 0);
-- ieval = SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) | SPI_BIT(OVRES);
-- }
-+/*
-+ * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby
-+ * they assume that spi slave device state will not change on deselect, so
-+ * that automagic deselection is OK. ("NPCSx rises if no data is to be
-+ * transmitted") Not so! Workaround uses nCSx pins as GPIOs; or newer
-+ * controllers have CSAAT and friends.
-+ *
-+ * Since the CSAAT functionality is a bit weird on newer controllers as
-+ * well, we use GPIO to control nCSx pins on all controllers, updating
-+ * MR.PCS to avoid confusing the controller. Using GPIOs also lets us
-+ * support active-high chipselects despite the controller's belief that
-+ * only active-low devices/systems exists.
-+ *
-+ * However, at91rm9200 has a second erratum whereby nCS0 doesn't work
-+ * right when driven with GPIO. ("Mode Fault does not allow more than one
-+ * Master on Chip Select 0.") No workaround exists for that ... so for
-+ * nCS0 on that chip, we (a) don't use the GPIO, (b) can't support CS_HIGH,
-+ * and (c) will trigger that first erratum in some cases.
-+ *
-+ * TODO: Test if the atmel_spi_is_v2() branch below works on
-+ * AT91RM9200 if we use some other register than CSR0. However, don't
-+ * do this unconditionally since AP7000 has an errata where the BITS
-+ * field in CSR0 overrides all other CSRs.
-+ */
-
-- /* REVISIT: We're waiting for ENDRX before we start the next
-- * transfer because we need to handle some difficult timing
-- * issues otherwise. If we wait for ENDTX in one transfer and
-- * then starts waiting for ENDRX in the next, it's difficult
-- * to tell the difference between the ENDRX interrupt we're
-- * actually waiting for and the ENDRX interrupt of the
-- * previous transfer.
-- *
-- * It should be doable, though. Just not now...
-- */
-- spi_writel(as, IER, ieval);
-- spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
-+static void atmel_spi_set_csr(struct atmel_spi *as,
-+ struct spi_device *spi, u32 csr)
-+{
-+ if (atmel_spi_is_v2())
-+ spi_writel(as, CSR0, csr);
-+ else
-+ spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
- }
-
--static void atmel_spi_next_message(struct spi_master *master)
-+static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
- {
-- struct atmel_spi *as = spi_master_get_devdata(master);
-- struct spi_message *msg;
-- struct spi_device *spi;
-+ struct atmel_spi_device *asd = spi->controller_state;
-+ unsigned active = spi->mode & SPI_CS_HIGH;
-+
-+ if (atmel_spi_is_v2()) {
-+ /*
-+ * Always use CSR0. This ensures that the clock
-+ * switches to the correct idle polarity before we
-+ * toggle the CS.
-+ */
-+ atmel_spi_set_csr(as, spi, asd->csr);
-+ spi_writel(as, MR, SPI_BF(PCS, 0x0e) | SPI_BIT(MODFDIS)
-+ | SPI_BIT(MSTR));
-+ spi_readl(as, MR);
-+ dev_vdbg(&spi->dev, "activate %u%s, csr0: %08x\n",
-+ asd->npcs_pin, active ? " (low)" : "",
-+ asd->csr);
-+
-+ gpio_set_value(asd->npcs_pin, active);
-+ } else {
-+ u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0;
-+ int i;
-+ u32 mr;
-+ u32 csr;
-+
-+ /* Make sure clock polarity is correct */
-+ for (i = 0; i < spi->master->num_chipselect; i++) {
-+ csr = spi_readl(as, CSR0 + 4 * i);
-+ if ((csr ^ cpol) & SPI_BIT(CPOL))
-+ spi_writel(as, CSR0 + 4 * i,
-+ csr ^ SPI_BIT(CPOL));
-+ }
-
-- BUG_ON(as->current_transfer);
-+ mr = spi_readl(as, MR);
-+ mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr);
-+ dev_vdbg(&spi->dev, "activate %u%s, mr: %08x csr: %08x\n",
-+ asd->npcs_pin, active ? " (low)" : "",
-+ mr, csr);
-+ if (spi->chip_select != 0)
-+ gpio_set_value(asd->npcs_pin, active);
-+ spi_writel(as, MR, mr);
-+ }
-+}
-
-- msg = list_entry(as->queue.next, struct spi_message, queue);
-- spi = msg->spi;
-+static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
-+{
-+ struct atmel_spi_device *asd = spi->controller_state;
-+ unsigned active = spi->mode & SPI_CS_HIGH;
-+ u32 mr;
-
-- dev_dbg(master->dev.parent, "start message %p for %s\n",
-- msg, spi->dev.bus_id);
-+ /* only deactivate *this* device; sometimes transfers to
-+ * another device may be active when this routine is called.
-+ */
-+ mr = spi_readl(as, MR);
-+ if (~SPI_BFEXT(PCS, mr) & (1 << spi->chip_select)) {
-+ mr = SPI_BFINS(PCS, 0xf, mr);
-+ spi_writel(as, MR, mr);
-+ }
-
-- /* select chip if it's not still active */
-- if (as->stay) {
-- if (as->stay != spi) {
-- cs_deactivate(as, as->stay);
-- cs_activate(as, spi);
-- }
-- as->stay = NULL;
-- } else
-- cs_activate(as, spi);
-+ dev_vdbg(&spi->dev, "DEactivate %u%s, mr %08x\n",
-+ asd->npcs_pin, active ? " (low)" : "",
-+ mr);
-
-- atmel_spi_next_xfer(master, msg);
-+ if (atmel_spi_is_v2() || spi->chip_select != 0)
-+ gpio_set_value(asd->npcs_pin, !active);
- }
-
- /*
-@@ -338,162 +477,460 @@ atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer)
- return 0;
- }
-
--static void atmel_spi_dma_unmap_xfer(struct spi_master *master,
-+static void atmel_spi_dma_unmap_xfer(struct atmel_spi *as,
- struct spi_transfer *xfer)
- {
- if (xfer->tx_dma != INVALID_DMA_ADDRESS)
-- dma_unmap_single(master->dev.parent, xfer->tx_dma,
-+ dma_unmap_single(&as->pdev->dev, xfer->tx_dma,
- xfer->len, DMA_TO_DEVICE);
- if (xfer->rx_dma != INVALID_DMA_ADDRESS)
-- dma_unmap_single(master->dev.parent, xfer->rx_dma,
-+ dma_unmap_single(&as->pdev->dev, xfer->rx_dma,
- xfer->len, DMA_FROM_DEVICE);
- }
-
--static void
--atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as,
-- struct spi_message *msg, int status, int stay)
-+static void atmel_spi_dma_unmap_msg(struct atmel_spi *as, struct spi_message *msg)
- {
-- if (!stay || status < 0)
-- cs_deactivate(as, msg->spi);
-- else
-- as->stay = msg->spi;
--
-- list_del(&msg->queue);
-- msg->status = status;
--
-- dev_dbg(master->dev.parent,
-- "xfer complete: %u bytes transferred\n",
-- msg->actual_length);
-+ struct spi_transfer *xfer;
-
-- spin_unlock(&as->lock);
-- msg->complete(msg->context);
-- spin_lock(&as->lock);
-+ if (!msg->is_dma_mapped)
-+ list_for_each_entry(xfer, &msg->transfers, transfer_list)
-+ atmel_spi_dma_unmap_xfer(as, xfer);
-+}
-
-- as->current_transfer = NULL;
-- as->next_transfer = NULL;
-+static void atmel_spi_handle_error(struct atmel_spi *as,
-+ struct spi_message *msg, int err)
-+{
-+ unsigned int timeout;
-+
-+ /* Drain the buffers so that the hardware is ready for a new message */
-+ for (timeout = 1000; timeout; timeout--)
-+ if (spi_readl(as, SR) & SPI_BIT(TXEMPTY))
-+ break;
-+ if (!timeout)
-+ dev_warn(&msg->spi->dev,
-+ "timeout waiting for TXEMPTY");
-+ while (spi_readl(as, SR) & SPI_BIT(RDRF))
-+ spi_readl(as, RDR);
-+
-+ /* Clear any overrun happening while cleaning up */
-+ spi_readl(as, SR);
-
-- /* continue if needed */
-- if (list_empty(&as->queue) || as->stopping)
-- spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
-- else
-- atmel_spi_next_message(master);
-+ msg->status = err;
-+ as->error = 0;
- }
-
--static irqreturn_t
--atmel_spi_interrupt(int irq, void *dev_id)
-+#ifdef CONFIG_SPI_ATMEL_HAVE_PDC
-+static int atmel_spi_wait_idle(struct atmel_spi *as, struct spi_message *msg)
- {
-- struct spi_master *master = dev_id;
-- struct atmel_spi *as = spi_master_get_devdata(master);
-- struct spi_message *msg;
-- struct spi_transfer *xfer;
-- u32 status, pending, imr;
-- int ret = IRQ_NONE;
-+ int err;
-
-- spin_lock(&as->lock);
-+ wait_event(as->wait, as->pending == 0);
-+ err = as->error;
-+ if (err) {
-+ dev_warn(&msg->spi->dev,
-+ "transfer error %d (%u/%u remaining)\n",
-+ err, spi_readl(as, TCR), spi_readl(as, RCR));
-+
-+ spi_writel(as, TNCR, 0);
-+ spi_writel(as, RNCR, 0);
-+ spi_writel(as, TCR, 0);
-+ spi_writel(as, RCR, 0);
-
-- xfer = as->current_transfer;
-- msg = list_entry(as->queue.next, struct spi_message, queue);
-+ atmel_spi_handle_error(as, msg, err);
-
-- imr = spi_readl(as, IMR);
-- status = spi_readl(as, SR);
-- pending = status & imr;
-+ return err;
-+ }
-
-- if (pending & SPI_BIT(OVRES)) {
-- int timeout;
-+ msg->actual_length += as->pending_bytes;
-+ as->pending_bytes = 0;
-+
-+ dev_vdbg(&msg->spi->dev, "controller idle, xfered so far: %u\n",
-+ msg->actual_length);
-+
-+ return 0;
-+}
-+
-+static int atmel_spi_submit_xfer(struct atmel_spi *as, struct spi_device *spi,
-+ struct spi_message *msg, struct spi_transfer *xfer)
-+{
-+ unsigned int bits = xfer->bits_per_word;
-+ unsigned int speed_hz = xfer->speed_hz;
-+ unsigned int submitted = 0;
-+ dma_addr_t rx_dma;
-+ dma_addr_t tx_dma;
-+
-+ dev_vdbg(&spi->dev, "submit_xfer len %u rx %p tx %p\n",
-+ xfer->len, xfer->rx_buf, xfer->tx_buf);
-+ dev_vdbg(&spi->dev, " csc %u bpw %u delay %u speed %u\n",
-+ xfer->cs_change, xfer->bits_per_word,
-+ xfer->delay_usecs, xfer->speed_hz);
-+
-+ if (bits || speed_hz) {
-+ struct atmel_spi_device *asd;
-+ u32 csr;
-+
-+ if (atmel_spi_wait_idle(as, msg))
-+ return 0;
-+
-+ asd = spi->controller_state;
-+ csr = asd->csr;
-+
-+ if (bits)
-+ csr = SPI_BFINS(BITS, csr, bits - 8);
-+ if (speed_hz) {
-+ u32 scbr = DIV_ROUND_UP(as->base_hz, speed_hz);
-+ csr = SPI_BFINS(SCBR, csr, scbr);
-+ }
-+
-+ atmel_spi_set_csr(as, spi, csr);
-+ }
-
-- ret = IRQ_HANDLED;
-+ if (!bits)
-+ bits = spi->bits_per_word;
-
-- spi_writel(as, IDR, (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX)
-- | SPI_BIT(OVRES)));
-+ /* PDC stuff starts here */
-+ while (submitted < xfer->len) {
-+ unsigned long len;
-+
-+ wait_event(as->wait, as->pending < 2);
-
- /*
-- * When we get an overrun, we disregard the current
-- * transfer. Data will not be copied back from any
-- * bounce buffer and msg->actual_len will not be
-- * updated with the last xfer.
-- *
-- * We will also not process any remaning transfers in
-- * the message.
-- *
-- * First, stop the transfer and unmap the DMA buffers.
-+ * This gives the RX side a slight advantage, making
-+ * overruns less likely.
- */
-- spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
-- if (!msg->is_dma_mapped)
-- atmel_spi_dma_unmap_xfer(master, xfer);
-+ spi_writel(as, PTCR, SPI_BIT(TXTDIS));
-+
-+ len = xfer->len - submitted;
-+ if (xfer->rx_buf) {
-+ rx_dma = xfer->rx_dma + submitted;
-+ } else {
-+ rx_dma = as->buffer_dma;
-+ len = min(len, BUFFER_SIZE);
-+ }
-+ if (xfer->tx_buf) {
-+ tx_dma = xfer->tx_dma + submitted;
-+ } else {
-+ tx_dma = as->buffer_dma;
-+ len = min(len, BUFFER_SIZE);
-+ memset(as->buffer, 0, len);
-+ }
-+
-+ submitted += len;
-+ if (bits > 8)
-+ len >>= 1;
-+
-+ spin_lock_irq(&as->lock);
-+ if (as->error) {
-+ spin_unlock_irq(&as->lock);
-+ atmel_spi_wait_idle(as, msg);
-+ return 0;
-+ }
-+
-+ spi_writel(as, RNPR, rx_dma);
-+ spi_writel(as, RNCR, len);
-+ spi_writel(as, TNPR, tx_dma);
-+ spi_writel(as, TNCR, len);
-+ spi_writel(as, IER, SPI_BIT(RXBUFF) | SPI_BIT(ENDRX)
-+ | SPI_BIT(OVRES));
-+ spi_writel(as, PTCR, SPI_BIT(RXTEN) | SPI_BIT(TXTEN));
-+ as->pending++;
-+ spin_unlock_irq(&as->lock);
-+ }
-+
-+ as->pending_bytes += submitted;
-
-- /* REVISIT: udelay in irq is unfriendly */
-+ if (xfer->delay_usecs || xfer->cs_change || xfer->bits_per_word
-+ || xfer->speed_hz) {
-+ struct atmel_spi_device *asd = spi->controller_state;
-+ int err;
-+
-+ err = atmel_spi_wait_idle(as, msg);
- if (xfer->delay_usecs)
- udelay(xfer->delay_usecs);
-+ atmel_spi_set_csr(as, spi, asd->csr);
-+ if (err)
-+ return 0;
-
-- dev_warn(master->dev.parent, "overrun (%u/%u remaining)\n",
-- spi_readl(as, TCR), spi_readl(as, RCR));
-+ if (xfer->cs_change && !atmel_spi_xfer_is_last(msg, xfer)) {
-+ cs_deactivate(as, spi);
-+ udelay(1);
-+ cs_activate(as, spi);
-+ }
-+ }
-
-- /*
-- * Clean up DMA registers and make sure the data
-- * registers are empty.
-- */
-- spi_writel(as, RNCR, 0);
-- spi_writel(as, TNCR, 0);
-- spi_writel(as, RCR, 0);
-- spi_writel(as, TCR, 0);
-- for (timeout = 1000; timeout; timeout--)
-- if (spi_readl(as, SR) & SPI_BIT(TXEMPTY))
-- break;
-- if (!timeout)
-- dev_warn(master->dev.parent,
-- "timeout waiting for TXEMPTY");
-- while (spi_readl(as, SR) & SPI_BIT(RDRF))
-- spi_readl(as, RDR);
-+ return xfer->cs_change;
-+}
-
-- /* Clear any overrun happening while cleaning up */
-- spi_readl(as, SR);
-+#else /* Use DMA engine framework, not PDC */
-
-- atmel_spi_msg_done(master, as, msg, -EIO, 0);
-- } else if (pending & (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX))) {
-- ret = IRQ_HANDLED;
-+static void atmel_spi_dma_complete(void *param)
-+{
-+ struct atmel_spi *as = param;
-
-- spi_writel(as, IDR, pending);
-+ as->pending = 0;
-+ as->sg_len = 0;
-+ wake_up(&as->wait);
-+}
-
-- if (as->current_remaining_bytes == 0) {
-- msg->actual_length += xfer->len;
--
-- if (!msg->is_dma_mapped)
-- atmel_spi_dma_unmap_xfer(master, xfer);
--
-- /* REVISIT: udelay in irq is unfriendly */
-- if (xfer->delay_usecs)
-- udelay(xfer->delay_usecs);
--
-- if (atmel_spi_xfer_is_last(msg, xfer)) {
-- /* report completed message */
-- atmel_spi_msg_done(master, as, msg, 0,
-- xfer->cs_change);
-- } else {
-- if (xfer->cs_change) {
-- cs_deactivate(as, msg->spi);
-- udelay(1);
-- cs_activate(as, msg->spi);
-- }
-+static int atmel_spi_wait_idle(struct atmel_spi *as, struct spi_message *msg)
-+{
-+ struct dma_chan *tx_chan = as->tx_chan;
-+ struct dma_chan *rx_chan = as->rx_chan;
-+ struct dma_device *dma = rx_chan->device;
-+ struct dma_async_tx_descriptor *tx_desc;
-+ struct dma_async_tx_descriptor *rx_desc;
-+ int err;
-+
-+ dev_vdbg(&msg->spi->dev, "wait_idle: sg_len=%u\n", as->sg_len);
-+
-+ if (!as->sg_len)
-+ return 0;
-+
-+ sg_mark_end(as->tx_sg + (as->sg_len - 1));
-+ sg_mark_end(as->rx_sg + (as->sg_len - 1));
-+ as->pending = 1;
-+ smp_wmb();
-+
-+ tx_desc = dma->device_prep_slave_sg(tx_chan,
-+ as->tx_sg, as->sg_len, DMA_TO_DEVICE,
-+ DMA_COMPL_SKIP_SRC_UNMAP | DMA_CTRL_ACK);
-+ rx_desc = dma->device_prep_slave_sg(rx_chan,
-+ as->rx_sg, as->sg_len, DMA_FROM_DEVICE,
-+ DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP
-+ | DMA_CTRL_ACK);
-+ rx_desc->callback = atmel_spi_dma_complete;
-+ rx_desc->callback_param = as;
-+ rx_desc->tx_submit(rx_desc);
-+ tx_desc->tx_submit(tx_desc);
-+ dma->device_issue_pending(rx_chan);
-+ dma->device_issue_pending(tx_chan);
-+
-+ spi_writel(as, IER, SPI_BIT(OVRES));
-+ wait_event(as->wait, !as->pending);
-+ spi_writel(as, IDR, SPI_BIT(OVRES));
-+ err = as->error;
-+ if (err) {
-+ dev_warn(&msg->spi->dev, "transfer error %d\n", err);
-+
-+ dma->device_terminate_all(tx_chan);
-+ dma->device_terminate_all(rx_chan);
-+
-+ atmel_spi_handle_error(as, msg, err);
-+
-+ return err;
-+ }
-+
-+ msg->actual_length += as->pending_bytes;
-+ as->pending_bytes = 0;
-+ sg_init_table(as->rx_sg, MAX_SG_SEGS);
-+ sg_init_table(as->tx_sg, MAX_SG_SEGS);
-+
-+ dev_vdbg(&msg->spi->dev, "controller idle, xfered so far: %u\n",
-+ msg->actual_length);
-+
-+ return 0;
-+}
-+
-+static int atmel_spi_submit_xfer(struct atmel_spi *as, struct spi_device *spi,
-+ struct spi_message *msg, struct spi_transfer *xfer)
-+{
-+ unsigned int bits = xfer->bits_per_word;
-+ unsigned int speed_hz = xfer->speed_hz;
-+ unsigned int submitted = 0;
-+ unsigned int i;
-+
-+ dev_vdbg(&spi->dev, "submit_xfer len %u rx %p tx %p\n",
-+ xfer->len, xfer->rx_buf, xfer->tx_buf);
-+ dev_vdbg(&spi->dev, " csc %u bpw %u delay %u speed %u\n",
-+ xfer->cs_change, xfer->bits_per_word,
-+ xfer->delay_usecs, xfer->speed_hz);
-+
-+ if (bits || speed_hz) {
-+ struct atmel_spi_device *asd;
-+ u32 csr;
-+
-+ if (atmel_spi_wait_idle(as, msg))
-+ return 0;
-+
-+ asd = spi->controller_state;
-+ csr = asd->csr;
-+
-+ if (bits)
-+ csr = SPI_BFINS(BITS, csr, bits - 8);
-+ if (speed_hz) {
-+ u32 scbr = DIV_ROUND_UP(as->base_hz, speed_hz);
-+ csr = SPI_BFINS(SCBR, csr, scbr);
-+ }
-+
-+ atmel_spi_set_csr(as, spi, csr);
-+ }
-+
-+ if (!bits)
-+ bits = spi->bits_per_word;
-+
-+ i = as->sg_len;
-+ while (submitted < xfer->len) {
-+ unsigned long len;
-+
-+ if (i == MAX_SG_SEGS) {
-+ if (atmel_spi_wait_idle(as, msg))
-+ return 0;
-+ i = 0;
-+ }
-+
-+ len = xfer->len - submitted;
-+ if (!xfer->rx_buf || !xfer->tx_buf)
-+ len = min(len, BUFFER_SIZE);
-+
-+ if (xfer->rx_buf) {
-+ sg_set_buf(&as->rx_sg[i], xfer->rx_buf + submitted, len);
-+ as->rx_sg[i].dma_address = xfer->rx_dma + submitted;
-+ } else {
-+ sg_set_buf(&as->rx_sg[i], as->buffer, len);
-+ as->rx_sg[i].dma_address = as->buffer_dma;
-+ }
-+ if (xfer->tx_buf) {
-+ sg_set_buf(&as->tx_sg[i], xfer->tx_buf + submitted, len);
-+ as->tx_sg[i].dma_address = xfer->tx_dma + submitted;
-+ } else {
-+ sg_set_buf(&as->tx_sg[i], as->buffer, len);
-+ as->tx_sg[i].dma_address = as->buffer_dma;
-+ memset(as->buffer, 0, len);
-+ }
-
-- /*
-- * Not done yet. Submit the next transfer.
-- *
-- * FIXME handle protocol options for xfer
-- */
-- atmel_spi_next_xfer(master, msg);
-+ submitted += len;
-+ as->sg_len = ++i;
-+ }
-+
-+ as->pending_bytes += submitted;
-+
-+ if (xfer->delay_usecs || xfer->cs_change || xfer->bits_per_word
-+ || xfer->speed_hz) {
-+ struct atmel_spi_device *asd = spi->controller_state;
-+ int err;
-+
-+ err = atmel_spi_wait_idle(as, msg);
-+ if (xfer->delay_usecs)
-+ udelay(xfer->delay_usecs);
-+ atmel_spi_set_csr(as, spi, asd->csr);
-+ if (err)
-+ return 0;
-+
-+ if (xfer->cs_change && !atmel_spi_xfer_is_last(msg, xfer)) {
-+ cs_deactivate(as, spi);
-+ udelay(1);
-+ cs_activate(as, spi);
-+ }
-+ }
-+
-+ return xfer->cs_change;
-+}
-+
-+#endif /* PDC vs. DMA engine */
-+
-+static void atmel_spi_work(struct work_struct *work)
-+{
-+ struct atmel_spi *as;
-+
-+ as = container_of(work, struct atmel_spi, work);
-+
-+ spin_lock_irq(&as->lock);
-+ while (!list_empty(&as->queue)) {
-+ struct spi_message *msg;
-+ struct spi_transfer *xfer;
-+ struct spi_device *spi;
-+ int cs_change = 0;
-+
-+ if (as->stopping)
-+ break;
-+
-+ msg = list_entry(as->queue.next, struct spi_message, queue);
-+ spin_unlock_irq(&as->lock);
-+
-+ spi = msg->spi;
-+
-+ if (as->stay) {
-+ if (as->stay != spi) {
-+ cs_deactivate(as, as->stay);
-+ cs_activate(as, spi);
- }
-+ as->stay = NULL;
- } else {
-- /*
-- * Keep going, we still have data to send in
-- * the current transfer.
-- */
-- atmel_spi_next_xfer(master, msg);
-+ cs_activate(as, spi);
-+ }
-+
-+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
-+ sg_init_table(as->rx_sg, MAX_SG_SEGS);
-+ sg_init_table(as->tx_sg, MAX_SG_SEGS);
-+#endif
-+
-+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
-+ if (msg->status != -EINPROGRESS)
-+ break;
-+ cs_change = atmel_spi_submit_xfer(as, spi, msg, xfer);
-+ }
-+
-+ if (msg->status == -EINPROGRESS) {
-+ if (atmel_spi_wait_idle(as, msg))
-+ cs_change = 1;
-+ else
-+ msg->status = 0;
- }
-+ if (!cs_change)
-+ cs_deactivate(as, spi);
-+ else
-+ as->stay = spi;
-+
-+ atmel_spi_dma_unmap_msg(as, msg);
-+
-+ msg->complete(msg->context);
-+ spin_lock_irq(&as->lock);
-+ list_del(&msg->queue);
-+ }
-+ spin_unlock_irq(&as->lock);
-+}
-+
-+static irqreturn_t atmel_spi_interrupt(int irq, void *dev_id)
-+{
-+ struct atmel_spi *as = dev_id;
-+ u32 status;
-+ u32 mask;
-+ u32 pending;
-+
-+ spin_lock(&as->lock);
-+
-+ status = spi_readl(as, SR);
-+ mask = spi_readl(as, IMR);
-+ pending = status & mask;
-+
-+ if (pending & SPI_BIT(OVRES)) {
-+#ifdef CONFIG_SPI_ATMEL_HAVE_PDC
-+ spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
-+#endif
-+ spi_writel(as, IDR, ~0UL);
-+ as->error = -EIO;
-+ as->pending = 0;
-+#ifdef CONFIG_SPI_ATMEL_HAVE_PDC
-+ } else if (pending & SPI_BIT(RXBUFF)) {
-+ spi_writel(as, IDR, ~0UL);
-+ as->pending = 0;
-+ } else if (pending & SPI_BIT(ENDRX)) {
-+ spi_writel(as, IDR, SPI_BIT(ENDRX));
-+ as->pending--;
-+#endif
-+ } else {
-+ dev_err(&as->pdev->dev,
-+ "unexpected interrupt: SR=0x%08x MR=0x%08x\n",
-+ status, mask);
-+ spi_writel(as, IDR, pending);
- }
-
-+ spi_readl(as, IMR);
-+ wake_up(&as->wait);
-+
- spin_unlock(&as->lock);
-
-- return ret;
-+ return IRQ_HANDLED;
- }
-
- /* the spi->mode bits understood by this driver: */
-@@ -502,6 +939,7 @@ atmel_spi_interrupt(int irq, void *dev_id)
- static int atmel_spi_setup(struct spi_device *spi)
- {
- struct atmel_spi *as;
-+ struct atmel_spi_device *asd;
- u32 scbr, csr;
- unsigned int bits = spi->bits_per_word;
- unsigned long bus_hz;
-@@ -536,21 +974,14 @@ static int atmel_spi_setup(struct spi_device *spi)
- }
-
- /* see notes above re chipselect */
-- if (cpu_is_at91rm9200()
-+ if (!atmel_spi_is_v2()
- && spi->chip_select == 0
- && (spi->mode & SPI_CS_HIGH)) {
- dev_dbg(&spi->dev, "setup: can't be active-high\n");
- return -EINVAL;
- }
-
-- /*
-- * Pre-new_1 chips start out at half the peripheral
-- * bus speed.
-- */
-- bus_hz = clk_get_rate(as->clk);
-- if (!as->new_1)
-- bus_hz /= 2;
--
-+ bus_hz = as->base_hz;
- if (spi->max_speed_hz) {
- /*
- * Calculate the lowest divider that satisfies the
-@@ -589,11 +1020,20 @@ static int atmel_spi_setup(struct spi_device *spi)
-
- /* chipselect must have been muxed as GPIO (e.g. in board setup) */
- npcs_pin = (unsigned int)spi->controller_data;
-- if (!spi->controller_state) {
-+ asd = spi->controller_state;
-+ if (!asd) {
-+ asd = kzalloc(sizeof(struct atmel_spi_device), GFP_KERNEL);
-+ if (!asd)
-+ return -ENOMEM;
-+
- ret = gpio_request(npcs_pin, spi->dev.bus_id);
-- if (ret)
-+ if (ret) {
-+ kfree(asd);
- return ret;
-- spi->controller_state = (void *)npcs_pin;
-+ }
-+
-+ asd->npcs_pin = npcs_pin;
-+ spi->controller_state = asd;
- gpio_direction_output(npcs_pin, !(spi->mode & SPI_CS_HIGH));
- } else {
- unsigned long flags;
-@@ -605,11 +1045,14 @@ static int atmel_spi_setup(struct spi_device *spi)
- spin_unlock_irqrestore(&as->lock, flags);
- }
-
-+ asd->csr = csr;
-+
- dev_dbg(&spi->dev,
- "setup: %lu Hz bpw %u mode 0x%x -> csr%d %08x\n",
- bus_hz / scbr, bits, spi->mode, spi->chip_select, csr);
-
-- spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
-+ if (!atmel_spi_is_v2())
-+ spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
-
- return 0;
- }
-@@ -620,74 +1063,81 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg)
- struct spi_transfer *xfer;
- unsigned long flags;
- struct device *controller = spi->master->dev.parent;
-+ int ret;
-
- as = spi_master_get_devdata(spi->master);
-
-- dev_dbg(controller, "new message %p submitted for %s\n",
-+ dev_vdbg(controller, "new message %p submitted for %s\n",
- msg, spi->dev.bus_id);
-
- if (unlikely(list_empty(&msg->transfers)
- || !spi->max_speed_hz))
- return -EINVAL;
-
-- if (as->stopping)
-- return -ESHUTDOWN;
--
- list_for_each_entry(xfer, &msg->transfers, transfer_list) {
- if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) {
- dev_dbg(&spi->dev, "missing rx or tx buf\n");
- return -EINVAL;
- }
-
-- /* FIXME implement these protocol options!! */
-- if (xfer->bits_per_word || xfer->speed_hz) {
-- dev_dbg(&spi->dev, "no protocol options yet\n");
-- return -ENOPROTOOPT;
-+ if (xfer->bits_per_word && (xfer->bits_per_word < 8
-+ || xfer->bits_per_word > 16)) {
-+ dev_dbg(&spi->dev, "unsupported bits_per_word\n");
-+ return -EINVAL;
-+ }
-+ if (xfer->speed_hz) {
-+ unsigned long divider;
-+ divider = DIV_ROUND_UP(as->base_hz, xfer->speed_hz);
-+
-+ if (divider > 255) {
-+ dev_dbg(&spi->dev, "speed_hz too low\n");
-+ return -EINVAL;
-+ }
- }
-
- /*
- * DMA map early, for performance (empties dcache ASAP) and
- * better fault reporting. This is a DMA-only driver.
-- *
-- * NOTE that if dma_unmap_single() ever starts to do work on
-- * platforms supported by this driver, we would need to clean
-- * up mappings for previously-mapped transfers.
- */
- if (!msg->is_dma_mapped) {
-- if (atmel_spi_dma_map_xfer(as, xfer) < 0)
-+ if (atmel_spi_dma_map_xfer(as, xfer) < 0) {
-+ /* Ick */
-+ while (xfer->transfer_list.prev != &msg->transfers) {
-+ xfer = list_entry(xfer->transfer_list.prev,
-+ struct spi_transfer,
-+ transfer_list);
-+ atmel_spi_dma_unmap_xfer(as, xfer);
-+ }
-+
- return -ENOMEM;
-+ }
- }
- }
-
--#ifdef VERBOSE
-- list_for_each_entry(xfer, &msg->transfers, transfer_list) {
-- dev_dbg(controller,
-- " xfer %p: len %u tx %p/%08x rx %p/%08x\n",
-- xfer, xfer->len,
-- xfer->tx_buf, xfer->tx_dma,
-- xfer->rx_buf, xfer->rx_dma);
-- }
--#endif
--
- msg->status = -EINPROGRESS;
- msg->actual_length = 0;
-
- spin_lock_irqsave(&as->lock, flags);
-- list_add_tail(&msg->queue, &as->queue);
-- if (!as->current_transfer)
-- atmel_spi_next_message(spi->master);
-+ if (as->stopping) {
-+ ret = -ESHUTDOWN;
-+ } else {
-+ list_add_tail(&msg->queue, &as->queue);
-+ queue_work(as->workqueue, &as->work);
-+ ret = 0;
-+ }
- spin_unlock_irqrestore(&as->lock, flags);
-
-- return 0;
-+ return ret;
- }
-
- static void atmel_spi_cleanup(struct spi_device *spi)
- {
- struct atmel_spi *as = spi_master_get_devdata(spi->master);
-+ struct atmel_spi_device *asd = spi->controller_state;
- unsigned gpio = (unsigned) spi->controller_data;
- unsigned long flags;
-
-- if (!spi->controller_state)
-+ if (!asd)
- return;
-
- spin_lock_irqsave(&as->lock, flags);
-@@ -697,14 +1147,131 @@ static void atmel_spi_cleanup(struct spi_device *spi)
- }
- spin_unlock_irqrestore(&as->lock, flags);
-
-+ spi->controller_state = NULL;
- gpio_free(gpio);
-+ kfree(asd);
-+}
-+
-+static void atmel_spi_stop_queue(struct atmel_spi *as)
-+{
-+ struct spi_message *msg;
-+
-+ /*
-+ * Prevent any new messages from being submitted, cancel any
-+ * submitted but not-yet-started messages, and wait for any
-+ * ongoing messages to complete.
-+ */
-+ as->stopping = true;
-+ smp_wmb();
-+ cancel_work_sync(&as->work);
-+
-+ /* Terminate anything that was left over */
-+ list_for_each_entry(msg, &as->queue, queue) {
-+ atmel_spi_dma_unmap_msg(as, msg);
-+ msg->status = -ESHUTDOWN;
-+ msg->complete(msg->context);
-+ }
-+}
-+
-+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
-+static enum dma_state_client atmel_spi_dma_chan_avail(struct atmel_spi *as,
-+ struct dma_chan *chan, struct dma_chan **pchan)
-+{
-+ enum dma_state_client ret = DMA_NAK;
-+
-+ if (!*pchan) {
-+ as->stopping = false;
-+ *pchan = chan;
-+ ret = DMA_ACK;
-+ }
-+
-+ return ret;
-+}
-+
-+static enum dma_state_client atmel_spi_dma_chan_removed(struct atmel_spi *as,
-+ struct dma_chan *chan, struct dma_chan **pchan)
-+{
-+ enum dma_state_client ret = DMA_NAK;
-+
-+ if (chan == *pchan) {
-+ atmel_spi_stop_queue(as);
-+ *pchan = NULL;
-+ ret = DMA_ACK;
-+ }
-+
-+ return ret;
- }
-
-+static enum dma_state_client atmel_spi_dma_rx_event(struct dma_client *client,
-+ struct dma_chan *chan, enum dma_state state)
-+{
-+ struct atmel_spi *as;
-+ enum dma_state_client ret = DMA_NAK;
-+
-+ as = container_of(client, struct atmel_spi, rx_client);
-+
-+ switch (state) {
-+ case DMA_RESOURCE_AVAILABLE:
-+ ret = atmel_spi_dma_chan_avail(as, chan, &as->rx_chan);
-+ if (ret == DMA_ACK)
-+ dev_info(&as->pdev->dev,
-+ "Using %s for DMA RX transfers\n",
-+ chan->dev.bus_id);
-+ break;
-+
-+ case DMA_RESOURCE_REMOVED:
-+ ret = atmel_spi_dma_chan_removed(as, chan, &as->rx_chan);
-+ if (ret == DMA_ACK)
-+ dev_info(&as->pdev->dev, "Lost %s, queue stopped\n",
-+ chan->dev.bus_id);
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+static enum dma_state_client atmel_spi_dma_tx_event(struct dma_client *client,
-+ struct dma_chan *chan, enum dma_state state)
-+{
-+ struct atmel_spi *as;
-+ enum dma_state_client ret = DMA_NAK;
-+
-+ as = container_of(client, struct atmel_spi, tx_client);
-+
-+ switch (state) {
-+ case DMA_RESOURCE_AVAILABLE:
-+ ret = atmel_spi_dma_chan_avail(as, chan, &as->tx_chan);
-+ if (ret == DMA_ACK)
-+ dev_info(&as->pdev->dev,
-+ "Using %s for DMA TX transfers\n",
-+ chan->dev.bus_id);
-+ break;
-+
-+ case DMA_RESOURCE_REMOVED:
-+ ret = atmel_spi_dma_chan_removed(as, chan, &as->tx_chan);
-+ if (ret == DMA_ACK)
-+ dev_info(&as->pdev->dev, "Lost %s, queue stopped\n",
-+ chan->dev.bus_id);
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ return ret;
-+}
-+#endif
-+
- /*-------------------------------------------------------------------------*/
-
- static int __init atmel_spi_probe(struct platform_device *pdev)
- {
- struct resource *regs;
-+ struct resource *buf;
-+ struct atmel_spi_pdata *pdata;
- int irq;
- struct clk *clk;
- int ret;
-@@ -719,6 +1286,14 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
- if (irq < 0)
- return irq;
-
-+ pdata = pdev->dev.platform_data;
-+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
-+ if (!pdata) {
-+ dev_dbg(&pdev->dev, "no platform data\n");
-+ return -ENXIO;
-+ }
-+#endif
-+
- clk = clk_get(&pdev->dev, "spi_clk");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
-@@ -738,31 +1313,65 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
-
- as = spi_master_get_devdata(master);
-
-- /*
-- * Scratch buffer is used for throwaway rx and tx data.
-- * It's coherent to minimize dcache pollution.
-- */
-- as->buffer = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE,
-- &as->buffer_dma, GFP_KERNEL);
-- if (!as->buffer)
-- goto out_free;
-+ buf = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+ if (buf) {
-+ as->buffer_dma = buf->start;
-+ as->buffer_size
-+ = rounddown_pow_of_two(buf->end - buf->start + 1);
-+ if (as->buffer_size) {
-+ as->buffer = (void __force *)ioremap(buf->start,
-+ as->buffer_size);
-+ if (as->buffer)
-+ as->always_bounce = true;
-+ }
-+ }
-+
-+ if (!as->buffer) {
-+ /*
-+ * Scratch buffer is used for throwaway rx and tx data.
-+ * It's coherent to minimize dcache pollution.
-+ */
-+ as->buffer = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE,
-+ &as->buffer_dma, GFP_KERNEL);
-+ if (!as->buffer)
-+ goto out_free;
-+ }
-
- spin_lock_init(&as->lock);
-+ init_waitqueue_head(&as->wait);
- INIT_LIST_HEAD(&as->queue);
-+ INIT_WORK(&as->work, atmel_spi_work);
- as->pdev = pdev;
-+ as->clk = clk;
- as->regs = ioremap(regs->start, (regs->end - regs->start) + 1);
- if (!as->regs)
- goto out_free_buffer;
-- as->irq = irq;
-- as->clk = clk;
-- if (!cpu_is_at91rm9200())
-- as->new_1 = 1;
-
-- ret = request_irq(irq, atmel_spi_interrupt, 0,
-- pdev->dev.bus_id, master);
-+ ret = request_irq(irq, atmel_spi_interrupt, 0, pdev->dev.bus_id, as);
- if (ret)
- goto out_unmap_regs;
-
-+ as->workqueue = create_singlethread_workqueue(pdev->dev.bus_id);
-+ if (!as->workqueue)
-+ goto out_free_irq;
-+
-+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
-+ as->rx_client.event_callback = atmel_spi_dma_rx_event;
-+ dma_cap_set(DMA_SLAVE, as->rx_client.cap_mask);
-+ as->rx_client.slave = pdata->rx_dma_slave;
-+ pdata->rx_dma_slave->rx_reg = regs->start + SPI_RDR + 3;
-+
-+ as->tx_client.event_callback = atmel_spi_dma_tx_event;
-+ dma_cap_set(DMA_SLAVE, as->tx_client.cap_mask);
-+ as->tx_client.slave = pdata->tx_dma_slave;
-+ pdata->tx_dma_slave->tx_reg = regs->start + SPI_TDR + 3;
-+
-+ dma_async_client_register(&as->rx_client);
-+ dma_async_client_register(&as->tx_client);
-+ dma_async_client_chan_request(&as->rx_client);
-+ dma_async_client_chan_request(&as->tx_client);
-+#endif
-+
- /* Initialize the hardware */
- clk_enable(clk);
- spi_writel(as, CR, SPI_BIT(SWRST));
-@@ -770,9 +1379,19 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
- spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
- spi_writel(as, CR, SPI_BIT(SPIEN));
-
-+ /* v1 chips start out at half the peripheral bus speed. */
-+ as->base_hz = clk_get_rate(clk);
-+ if (!atmel_spi_is_v2())
-+ as->base_hz /= 2;
-+
- /* go! */
- dev_info(&pdev->dev, "Atmel SPI Controller at 0x%08lx (irq %d)\n",
- (unsigned long)regs->start, irq);
-+ if (as->always_bounce)
-+ dev_info(&pdev->dev, "Using bounce buffer at 0x%08x len %zu\n",
-+ as->buffer_dma, as->buffer_size);
-+
-+ atmel_spi_init_debugfs(as);
-
- ret = spi_register_master(master);
- if (ret)
-@@ -781,9 +1400,16 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
- return 0;
-
- out_reset_hw:
-+ atmel_spi_cleanup_debugfs(as);
- spi_writel(as, CR, SPI_BIT(SWRST));
- clk_disable(clk);
-- free_irq(irq, master);
-+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
-+ dma_async_client_unregister(&as->tx_client);
-+ dma_async_client_unregister(&as->rx_client);
-+#endif
-+ destroy_workqueue(as->workqueue);
-+out_free_irq:
-+ free_irq(irq, as);
- out_unmap_regs:
- iounmap(as->regs);
- out_free_buffer:
-@@ -799,33 +1425,34 @@ static int __exit atmel_spi_remove(struct platform_device *pdev)
- {
- struct spi_master *master = platform_get_drvdata(pdev);
- struct atmel_spi *as = spi_master_get_devdata(master);
-- struct spi_message *msg;
-
-- /* reset the hardware and block queue progress */
-- spin_lock_irq(&as->lock);
-- as->stopping = 1;
-- spi_writel(as, CR, SPI_BIT(SWRST));
-- spi_readl(as, SR);
-- spin_unlock_irq(&as->lock);
-+ /* Stop the queue */
-+ atmel_spi_stop_queue(as);
-
-- /* Terminate remaining queued transfers */
-- list_for_each_entry(msg, &as->queue, queue) {
-- /* REVISIT unmapping the dma is a NOP on ARM and AVR32
-- * but we shouldn't depend on that...
-- */
-- msg->status = -ESHUTDOWN;
-- msg->complete(msg->context);
-- }
-+ atmel_spi_cleanup_debugfs(as);
-
-- dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
-- as->buffer_dma);
-+ /* Shut down the hardware */
-+ spi_writel(as, CR, SPI_BIT(SWRST));
-+ spi_readl(as, SR);
-
-+ /* Clean up */
-+ spi_unregister_master(master);
-+ free_irq(platform_get_irq(pdev, 0), as);
-+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
-+ dma_async_client_unregister(&as->tx_client);
-+ dma_async_client_unregister(&as->rx_client);
-+#endif
-+ destroy_workqueue(as->workqueue);
-+ if (as->always_bounce)
-+ iounmap((void __iomem __force *)as->buffer);
-+ else
-+ dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
-+ as->buffer_dma);
-+ iounmap(as->regs);
- clk_disable(as->clk);
- clk_put(as->clk);
-- free_irq(as->irq, master);
-- iounmap(as->regs);
-
-- spi_unregister_master(master);
-+ spi_master_put(master);
-
- return 0;
- }
-@@ -837,7 +1464,9 @@ static int atmel_spi_suspend(struct platform_device *pdev, pm_message_t mesg)
- struct spi_master *master = platform_get_drvdata(pdev);
- struct atmel_spi *as = spi_master_get_devdata(master);
-
-+ atmel_spi_stop_queue(as);
- clk_disable(as->clk);
-+
- return 0;
- }
-
-@@ -847,6 +1476,9 @@ static int atmel_spi_resume(struct platform_device *pdev)
- struct atmel_spi *as = spi_master_get_devdata(master);
-
- clk_enable(as->clk);
-+ as->stopping = false;
-+ smp_wmb();
-+
- return 0;
- }
-
-@@ -868,7 +1500,12 @@ static struct platform_driver atmel_spi_driver = {
-
- static int __init atmel_spi_init(void)
- {
-- return platform_driver_probe(&atmel_spi_driver, atmel_spi_probe);
-+ int ret;
-+
-+ ret = platform_driver_probe(&atmel_spi_driver, atmel_spi_probe);
-+ if (ret)
-+ pr_notice("atmel_spi probe failed: %d\n", ret);
-+ return ret;
- }
- module_init(atmel_spi_init);
-
-@@ -879,6 +1516,6 @@ static void __exit atmel_spi_exit(void)
- module_exit(atmel_spi_exit);
-
- MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver");
--MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
--MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>");
-+MODULE_LICENSE("GPL v2");
- MODULE_ALIAS("platform:atmel_spi");
-diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
-index bcefbdd..6882a7d 100644
---- a/drivers/usb/Kconfig
-+++ b/drivers/usb/Kconfig
-@@ -37,6 +37,8 @@ config USB_ARCH_HAS_OHCI
- default y if ARCH_EP93XX
- default y if ARCH_AT91
- default y if ARCH_PNX4008
-+ # AVR32
-+ default y if AVR32
- # PPC:
- default y if STB03xxx
- default y if PPC_MPC52xx
-@@ -55,6 +57,7 @@ config USB_ARCH_HAS_EHCI
- default y if PPC_83xx
- default y if SOC_AU1200
- default y if ARCH_IXP4XX
-+ default y if AVR32
- default PCI
-
- # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
-diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
-index 228797e..8c48773 100644
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -73,12 +73,12 @@ config USB_EHCI_TT_NEWSCHED
-
- config USB_EHCI_BIG_ENDIAN_MMIO
- bool
-- depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX)
-+ depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX || AVR32)
- default y
-
- config USB_EHCI_BIG_ENDIAN_DESC
- bool
-- depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
-+ depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || AVR32)
- default y
-
- config USB_EHCI_FSL
-@@ -208,17 +208,19 @@ config USB_OHCI_HCD_SSB
- config USB_OHCI_BIG_ENDIAN_DESC
- bool
- depends on USB_OHCI_HCD
-+ default y if AVR32
- default n
-
- config USB_OHCI_BIG_ENDIAN_MMIO
- bool
- depends on USB_OHCI_HCD
-+ default y if AVR32
- default n
-
- config USB_OHCI_LITTLE_ENDIAN
- bool
- depends on USB_OHCI_HCD
-- default n if STB03xxx || PPC_MPC52xx
-+ default n if STB03xxx || PPC_MPC52xx || AVR32
- default y
-
- config USB_UHCI_HCD
-diff --git a/drivers/usb/host/ehci-avr32.c b/drivers/usb/host/ehci-avr32.c
-new file mode 100644
-index 0000000..7cd0591
---- /dev/null
-+++ b/drivers/usb/host/ehci-avr32.c
-@@ -0,0 +1,213 @@
-+/*
-+ * AVR32 EHCI bus and power management glue
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/platform_device.h>
-+
-+static struct clk *utmi_clk;
-+static struct clk *hclk;
-+
-+static void ehci_avr32_start_clocks(struct device *dev)
-+{
-+ dev_vdbg(dev, "starting clocks...\n");
-+
-+ clk_enable(utmi_clk);
-+ clk_enable(hclk);
-+}
-+
-+static void ehci_avr32_stop_clocks(struct device *dev)
-+{
-+ dev_vdbg(dev, "stopping clocks...\n");
-+
-+ clk_disable(hclk);
-+ clk_disable(utmi_clk);
-+}
-+
-+static int ehci_avr32_setup(struct usb_hcd *hcd)
-+{
-+ struct device *dev = hcd->self.controller;
-+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+ int ret;
-+
-+ ehci_avr32_start_clocks(dev);
-+
-+ ehci->caps = hcd->regs;
-+ ehci->regs = hcd->regs
-+ + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
-+ dbg_hcs_params(ehci, "reset");
-+ dbg_hcc_params(ehci, "reset");
-+
-+ /* cache this readonly data; minimize chip reads */
-+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+
-+ ret = ehci_halt(ehci);
-+ if (ret)
-+ goto err;
-+
-+ /* data structure init */
-+ ret = ehci_init(hcd);
-+ if (ret)
-+ goto err;
-+
-+ ehci->sbrn = 0x20;
-+ ehci_port_power(ehci, 0);
-+
-+ return 0;
-+
-+err:
-+ ehci_avr32_stop_clocks(dev);
-+ return ret;
-+}
-+
-+static void ehci_avr32_shutdown(struct usb_hcd *hcd)
-+{
-+ ehci_shutdown(hcd);
-+ ehci_avr32_stop_clocks(hcd->self.controller);
-+}
-+
-+static const struct hc_driver ehci_avr32_hc_driver = {
-+ .description = hcd_name,
-+ .product_desc = "AVR32 USBH (EHCI)",
-+ .hcd_priv_size = sizeof(struct ehci_hcd),
-+
-+ .irq = ehci_irq,
-+ .flags = HCD_MEMORY | HCD_USB2,
-+
-+ .reset = ehci_avr32_setup,
-+ .start = ehci_run,
-+ .stop = ehci_stop,
-+ .shutdown = ehci_avr32_shutdown,
-+
-+ .urb_enqueue = ehci_urb_enqueue,
-+ .urb_dequeue = ehci_urb_dequeue,
-+ .endpoint_disable = ehci_endpoint_disable,
-+
-+ .get_frame_number = ehci_get_frame,
-+
-+ .hub_status_data = ehci_hub_status_data,
-+ .hub_control = ehci_hub_control,
-+ .bus_suspend = ehci_bus_suspend,
-+ .bus_resume = ehci_bus_resume,
-+ .relinquish_port = ehci_relinquish_port,
-+ .port_handed_over = ehci_port_handed_over,
-+};
-+
-+static int ehci_avr32_probe(struct platform_device *pdev)
-+{
-+ struct resource *reg_res;
-+ struct usb_hcd *hcd;
-+ struct ehci_hcd *ehci;
-+ int irq;
-+ int ret;
-+
-+ reg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!reg_res) {
-+ dev_dbg(&pdev->dev, "no MMIO resource\n");
-+ return -ENXIO;
-+ }
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_dbg(&pdev->dev, "no IRQ resource\n");
-+ return -ENXIO;
-+ }
-+
-+ hclk = clk_get(&pdev->dev, "hclk");
-+ if (IS_ERR(hclk)) {
-+ dev_dbg(&pdev->dev, "no HSB clock\n");
-+ return -ENXIO;
-+ }
-+ utmi_clk = clk_get(&pdev->dev, "utmi_clk");
-+ if (IS_ERR(utmi_clk)) {
-+ dev_dbg(&pdev->dev, "no UTMI clock\n");
-+ ret = -ENXIO;
-+ goto err_utmi_clk;
-+ }
-+
-+ if (!request_mem_region(reg_res->start,
-+ reg_res->end - reg_res->start + 1,
-+ hcd_name)) {
-+ dev_dbg(&pdev->dev, "config regs busy\n");
-+ ret = -EBUSY;
-+ goto err_request_mmio;
-+ }
-+
-+ ret = -ENOMEM;
-+
-+ hcd = usb_create_hcd(&ehci_avr32_hc_driver, &pdev->dev, "ehci-avr32");
-+ if (!hcd) {
-+ dev_dbg(&pdev->dev, "failed to create hcd\n");
-+ goto err_create_hcd;
-+ }
-+
-+ hcd->rsrc_start = reg_res->start;
-+ hcd->rsrc_len = reg_res->end - reg_res->start + 1;
-+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-+ if (!hcd->regs) {
-+ dev_dbg(&pdev->dev, "failed to map registers\n");
-+ goto err_ioremap;
-+ }
-+
-+ ehci = hcd_to_ehci(hcd);
-+ ehci->big_endian_mmio = 1;
-+ ehci->big_endian_desc = 1;
-+
-+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
-+ if (ret)
-+ goto err_add_hcd;
-+
-+ return 0;
-+
-+err_add_hcd:
-+ iounmap(hcd->regs);
-+err_ioremap:
-+ usb_put_hcd(hcd);
-+err_create_hcd:
-+ release_mem_region(reg_res->start, reg_res->end - reg_res->start + 1);
-+err_request_mmio:
-+ clk_put(utmi_clk);
-+err_utmi_clk:
-+ clk_put(hclk);
-+
-+ return ret;
-+}
-+
-+static int ehci_avr32_remove(struct platform_device *pdev)
-+{
-+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
-+
-+ platform_set_drvdata(pdev, NULL);
-+ usb_remove_hcd(hcd);
-+ iounmap(hcd->regs);
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+ usb_put_hcd(hcd);
-+ clk_put(utmi_clk);
-+ clk_put(hclk);
-+
-+ return 0;
-+}
-+
-+/* FIXME */
-+#define ehci_avr32_suspend NULL
-+#define ehci_avr32_resume NULL
-+
-+static struct platform_driver ehci_hcd_avr32_driver = {
-+ .probe = ehci_avr32_probe,
-+ .remove = ehci_avr32_remove,
-+ .suspend = ehci_avr32_suspend,
-+ .resume = ehci_avr32_resume,
-+ .shutdown = usb_hcd_platform_shutdown,
-+ .driver = {
-+ .name = "ehci",
-+ },
-+};
-diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
-index 86e38b0..15e3956 100644
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1015,6 +1015,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ehci_hcd_au1xxx_driver
- #endif
-
-+#ifdef CONFIG_AVR32
-+#include "ehci-avr32.c"
-+#define PLATFORM_DRIVER ehci_hcd_avr32_driver
-+#endif
-+
- #ifdef CONFIG_PPC_PS3
- #include "ehci-ps3.c"
- #define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver
-diff --git a/drivers/usb/host/ohci-avr32.c b/drivers/usb/host/ohci-avr32.c
-new file mode 100644
-index 0000000..67f25d6
---- /dev/null
-+++ b/drivers/usb/host/ohci-avr32.c
-@@ -0,0 +1,208 @@
-+/*
-+ * AVR32 OHCI bus and power management glue
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/platform_device.h>
-+
-+/* Grr! The core layer doesn't let us keep private data anywhere! */
-+static struct clk *ohci_clk;
-+static struct clk *utmi_clk;
-+static struct clk *hclk;
-+
-+static void ohci_avr32_start_clocks(struct device *dev)
-+{
-+ dev_vdbg(dev, "starting clocks...\n");
-+
-+ clk_enable(ohci_clk);
-+ clk_enable(utmi_clk);
-+ clk_enable(hclk);
-+}
-+
-+static void ohci_avr32_stop_clocks(struct device *dev)
-+{
-+ dev_vdbg(dev, "stopping clocks...\n");
-+
-+ clk_disable(hclk);
-+ clk_disable(utmi_clk);
-+ clk_disable(ohci_clk);
-+}
-+
-+static int ohci_avr32_start(struct usb_hcd *hcd)
-+{
-+ struct device *dev = hcd->self.controller;
-+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-+ int ret;
-+
-+ ohci_avr32_start_clocks(dev);
-+
-+ ret = ohci_init(ohci);
-+ if (ret)
-+ goto err_ohci_init;
-+
-+ ret = ohci_run(ohci);
-+ if (likely(!ret))
-+ return 0;
-+
-+ ohci_stop(hcd);
-+
-+err_ohci_init:
-+ ohci_avr32_stop_clocks(dev);
-+ return ret;
-+}
-+
-+static void ohci_avr32_stop(struct usb_hcd *hcd)
-+{
-+ ohci_stop(hcd);
-+ ohci_avr32_stop_clocks(hcd->self.controller);
-+}
-+
-+static const struct hc_driver ohci_avr32_hc_driver = {
-+ .description = hcd_name,
-+ .product_desc = "AVR32 USBH (OHCI)",
-+ .hcd_priv_size = sizeof(struct ohci_hcd),
-+
-+ .irq = ohci_irq,
-+ .flags = HCD_USB11 | HCD_MEMORY,
-+
-+ .start = ohci_avr32_start,
-+ .stop = ohci_avr32_stop,
-+ .shutdown = ohci_shutdown,
-+
-+ .urb_enqueue = ohci_urb_enqueue,
-+ .urb_dequeue = ohci_urb_dequeue,
-+ .endpoint_disable = ohci_endpoint_disable,
-+ .get_frame_number = ohci_get_frame,
-+ .hub_status_data = ohci_hub_status_data,
-+ .hub_control = ohci_hub_control,
-+#ifdef CONFIG_PM
-+ .bus_suspend = ohci_bus_suspend,
-+ .bus_resume = ohci_bus_resume,
-+#endif
-+ .start_port_reset = ohci_start_port_reset,
-+};
-+
-+static int ohci_avr32_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs;
-+ struct usb_hcd *hcd;
-+ int irq;
-+ int ret;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_dbg(&pdev->dev, "no MMIO resource\n");
-+ return -ENXIO;
-+ }
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_dbg(&pdev->dev, "no IRQ resource\n");
-+ return -ENXIO;
-+ }
-+
-+ hclk = clk_get(&pdev->dev, "hclk");
-+ if (IS_ERR(hclk)) {
-+ dev_dbg(&pdev->dev, "no HSB clock\n");
-+ return -ENXIO;
-+ }
-+ utmi_clk = clk_get(&pdev->dev, "utmi_clk");
-+ if (IS_ERR(utmi_clk)) {
-+ dev_dbg(&pdev->dev, "no UTMI clock\n");
-+ ret = -ENXIO;
-+ goto err_utmi_clk;
-+ }
-+ ohci_clk = clk_get(&pdev->dev, "ohci_clk");
-+ if (IS_ERR(ohci_clk)) {
-+ dev_dbg(&pdev->dev, "no OHCI clock\n");
-+ ret = -ENXIO;
-+ goto err_ohci_clk;
-+ }
-+
-+ if (!request_mem_region(regs->start, regs->end - regs->start + 1,
-+ hcd_name)) {
-+ dev_dbg(&pdev->dev, "config regs busy\n");
-+ ret = -EBUSY;
-+ goto err_request_mmio;
-+ }
-+
-+ ret = -ENOMEM;
-+ hcd = usb_create_hcd(&ohci_avr32_hc_driver, &pdev->dev, "ohci-avr32");
-+ if (!hcd) {
-+ dev_dbg(&pdev->dev, "failed to create hcd\n");
-+ goto err_create_hcd;
-+ }
-+
-+ hcd->rsrc_start = regs->start;
-+ hcd->rsrc_len = regs->end - regs->start + 1;
-+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-+ if (!hcd->regs) {
-+ dev_dbg(&pdev->dev, "failed to map registers\n");
-+ goto err_ioremap;
-+ }
-+
-+ ohci_hcd_init(hcd_to_ohci(hcd));
-+
-+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
-+ if (ret)
-+ goto err_add_hcd;
-+
-+ return 0;
-+
-+err_add_hcd:
-+ iounmap(hcd->regs);
-+err_ioremap:
-+ usb_put_hcd(hcd);
-+err_create_hcd:
-+ release_mem_region(regs->start, regs->end - regs->start + 1);
-+err_request_mmio:
-+ clk_put(ohci_clk);
-+err_ohci_clk:
-+ clk_put(utmi_clk);
-+err_utmi_clk:
-+ clk_put(hclk);
-+
-+ return ret;
-+}
-+
-+static int ohci_avr32_remove(struct platform_device *pdev)
-+{
-+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
-+
-+ platform_set_drvdata(pdev, NULL);
-+ usb_remove_hcd(hcd);
-+ iounmap(hcd->regs);
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+ usb_put_hcd(hcd);
-+ clk_put(utmi_clk);
-+ clk_put(ohci_clk);
-+ clk_put(hclk);
-+
-+ return 0;
-+}
-+
-+/* FIXME */
-+#define ohci_avr32_suspend NULL
-+#define ohci_avr32_resume NULL
-+
-+static struct platform_driver ohci_hcd_avr32_driver = {
-+ .probe = ohci_avr32_probe,
-+ .remove = ohci_avr32_remove,
-+ .shutdown = usb_hcd_platform_shutdown,
-+ .suspend = ohci_avr32_suspend,
-+ .resume = ohci_avr32_resume,
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "ohci",
-+ },
-+};
-+MODULE_ALIAS("platform:ohci");
-diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
-index 8bec02c..43bed29 100644
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1045,6 +1045,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ohci_hcd_at91_driver
- #endif
-
-+#ifdef CONFIG_AVR32
-+#include "ohci-avr32.c"
-+#define PLATFORM_DRIVER ohci_hcd_avr32_driver
-+#endif
-+
- #ifdef CONFIG_ARCH_PNX4008
- #include "ohci-pnx4008.c"
- #define PLATFORM_DRIVER usb_hcd_pnx4008_driver
-diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
-index faf622e..d77ea5c 100644
---- a/drivers/usb/host/ohci.h
-+++ b/drivers/usb/host/ohci.h
-@@ -654,8 +654,10 @@ static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x)
- * some big-endian SOC implementations. Same thing happens with PSW access.
- */
-
--#ifdef CONFIG_PPC_MPC52xx
-+#if defined(CONFIG_PPC_MPC52xx)
- #define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO)
-+#elif defined(CONFIG_AVR32)
-+#define big_endian_frame_no_quirk(ohci) 1
- #else
- #define big_endian_frame_no_quirk(ohci) 0
- #endif
-diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
-index 70d135e..9f8e70b 100644
---- a/drivers/video/Kconfig
-+++ b/drivers/video/Kconfig
-@@ -938,6 +938,15 @@ config FB_ATMEL
- help
- This enables support for the AT91/AT32 LCD Controller.
-
-+config FB_ATMEL_MPOP
-+ tristate "AT32 MPOP support"
-+ depends on FB && AVR32 && FB_ATMEL
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ help
-+ This enables support for the AT32 MPOP module.
-+
- config FB_INTSRAM
- bool "Frame Buffer in internal SRAM"
- depends on FB_ATMEL && ARCH_AT91SAM9261
-diff --git a/drivers/video/Makefile b/drivers/video/Makefile
-index a6b5529..edc0656 100644
---- a/drivers/video/Makefile
-+++ b/drivers/video/Makefile
-@@ -89,6 +89,7 @@ obj-$(CONFIG_FB_SA1100) += sa1100fb.o
- obj-$(CONFIG_FB_HIT) += hitfb.o
- obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
- obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
-+obj-$(CONFIG_FB_ATMEL_MPOP) += atmel_mpopfb.o
- obj-$(CONFIG_FB_PVR2) += pvr2fb.o
- obj-$(CONFIG_FB_VOODOO1) += sstfb.o
- obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
-diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
-index 75dac57..993d79e 100644
---- a/drivers/video/atmel_lcdfb.c
-+++ b/drivers/video/atmel_lcdfb.c
-@@ -178,7 +178,7 @@ static void init_contrast(struct atmel_lcdfb_info *sinfo)
- static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
- .type = FB_TYPE_PACKED_PIXELS,
- .visual = FB_VISUAL_TRUECOLOR,
-- .xpanstep = 0,
-+ .xpanstep = 1,
- .ypanstep = 1,
- .ywrapstep = 0,
- .accel = FB_ACCEL_NONE,
-@@ -239,7 +239,7 @@ static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
- }
-
- static void atmel_lcdfb_update_dma(struct fb_info *info,
-- struct fb_var_screeninfo *var)
-+ struct fb_var_screeninfo *var)
- {
- struct atmel_lcdfb_info *sinfo = info->par;
- struct fb_fix_screeninfo *fix = &info->fix;
-@@ -251,6 +251,8 @@ static void atmel_lcdfb_update_dma(struct fb_info *info,
- dma_addr &= ~3UL;
-
- /* Set framebuffer DMA base address and pixel offset */
-+ dev_dbg(info->device, "%s:\n", __func__);
-+ dev_dbg(info->device, " *setting dma addr: 0x%lx \n", dma_addr);
- lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
-
- atmel_lcdfb_update_dma2d(sinfo, var);
-@@ -482,6 +484,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
- dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n",
- info->var.xres, info->var.yres,
- info->var.xres_virtual, info->var.yres_virtual);
-+ dev_dbg(info->device, " * bpp: %u\n", info->var.bits_per_pixel);
-
- atmel_lcdfb_stop_nowait(sinfo);
-
-@@ -583,7 +586,12 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
- lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
- /* Enable FIFO & DMA errors */
- lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
--
-+
-+ /* !!!HACK for logging end of frame and underruns
-+ when connected to MPOP. */
-+ if( info->var.bits_per_pixel == 32 )
-+ lcdc_writel(sinfo, ATMEL_LCDC_IER, 0x70);
-+
- /* ...wait for DMA engine to become idle... */
- while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
- msleep(10);
-@@ -684,7 +692,7 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
- }
-
- static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
-- struct fb_info *info)
-+ struct fb_info *info)
- {
- dev_dbg(info->device, "%s\n", __func__);
-
-@@ -816,7 +824,8 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
- info->fix = atmel_lcdfb_fix;
-
- /* Enable LCDC Clocks */
-- if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
-+ if (cpu_is_at91sam9261() || cpu_is_at32ap7000()
-+ || cpu_is_at32ap7200()) {
- sinfo->bus_clk = clk_get(dev, "hck1");
- if (IS_ERR(sinfo->bus_clk)) {
- ret = PTR_ERR(sinfo->bus_clk);
-diff --git a/drivers/video/atmel_mpopfb.c b/drivers/video/atmel_mpopfb.c
-new file mode 100644
-index 0000000..0a07f7b
---- /dev/null
-+++ b/drivers/video/atmel_mpopfb.c
-@@ -0,0 +1,1127 @@
-+/*
-+ * Driver for AT91/AT32 LCD Controller
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive for
-+ * more details.
-+ */
-+
-+#define DEBUG
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/uaccess.h>
-+
-+#include <mach/board.h>
-+#include <mach/cpu.h>
-+
-+#include <video/atmel_lcdc.h>
-+#include <video/atmel_mpop.h>
-+
-+#define mpop_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg))
-+#define mpop_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg))
-+
-+#define ATMEL_MPOPFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
-+ | FBINFO_PARTIAL_PAN_OK \
-+ | FBINFO_HWACCEL_XPAN \
-+ | FBINFO_HWACCEL_YPAN)
-+
-+static struct atmel_mpopfb_rgbconv_coeffs atmel_mpop_ycrcb2rgb_coeffs = {
-+ .r1 = 298,
-+ .r2 = 0,
-+ .r3 = 409,
-+ .r4 = -56992,
-+ .g1 = 298,
-+ .g2 = -100,
-+ .g3 = -208,
-+ .g4 = 34784,
-+ .b1 = 298,
-+ .b2 = 516,
-+ .b3 = 0,
-+ .b4 = -70688,
-+};
-+
-+static struct fb_fix_screeninfo atmel_mpopfb_fix __initdata = {
-+ .type = FB_TYPE_PLANES,
-+ .visual = FB_VISUAL_TRUECOLOR,
-+ .xpanstep = 16,
-+ .ypanstep = 1,
-+ .ywrapstep = 1,
-+ .accel = FB_ACCEL_NONE,
-+};
-+
-+static void atmel_mpopfb_update_sar(struct fb_info *info,
-+ struct fb_var_screeninfo *var)
-+{
-+ struct atmel_mpopfb_info *sinfo = info->par;
-+ struct fb_fix_screeninfo *fix = &info->fix;
-+ u32 y_sar, u_sar, v_sar, o1_sar, o2_sar, cursor_sar, next_sar;
-+
-+ u32 chroma_xres_virtual;
-+ u32 chroma_yres_virtual;
-+ u32 chroma_xres;
-+ u32 chroma_yres;
-+ u32 chroma_xoffset;
-+ u32 chroma_yoffset;
-+
-+ switch (var->bits_per_pixel) {
-+ default:
-+ case 12:
-+ chroma_xres_virtual = var->xres_virtual / 2;
-+ chroma_yres_virtual = var->yres_virtual / 2;
-+ chroma_xres = var->xres / 2;
-+ chroma_yres = var->yres / 2;
-+ chroma_xoffset = var->xoffset / 2;
-+ chroma_yoffset = var->yoffset / 2;
-+ break;
-+ case 16:
-+ chroma_xres_virtual = var->xres_virtual / 2;
-+ chroma_yres_virtual = var->yres_virtual;
-+ chroma_xres = var->xres / 2;
-+ chroma_yres = var->yres;
-+ chroma_xoffset = var->xoffset / 2;
-+ chroma_yoffset = var->yoffset;
-+ break;
-+ case 24:
-+ chroma_xres_virtual = var->xres_virtual;
-+ chroma_yres_virtual = var->yres_virtual;
-+ chroma_xres = var->xres;
-+ chroma_yres = var->yres;
-+ chroma_xoffset = var->xoffset;
-+ chroma_yoffset = var->yoffset;
-+ break;
-+ }
-+
-+ /* Setup pointer to YUV planes in YUV framebuffer. */
-+ y_sar = fix->smem_start + var->xoffset
-+ + var->yoffset * var->xres_virtual;
-+ u_sar = fix->smem_start + var->xres_virtual * var->yres_virtual
-+ + chroma_xoffset + chroma_yoffset * chroma_xres_virtual;
-+ v_sar = u_sar + chroma_xres_virtual * chroma_yres_virtual;
-+ next_sar = fix->smem_start + var->xres_virtual * var->yres_virtual
-+ + 2 * chroma_xres_virtual * chroma_yres_virtual;
-+ o1_sar = next_sar;
-+ if (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].enabled)
-+ next_sar += sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].xsize
-+ * sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].ysize;
-+ o2_sar = next_sar;
-+ if (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].enabled)
-+ next_sar += sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].xsize
-+ * sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].ysize;
-+ cursor_sar = next_sar;
-+
-+ if (sinfo->baseimg_info.flip) {
-+ /* If we flip we must start with the last line in the frame. */
-+ y_sar += var->xres_virtual * (var->yres - 1);
-+ u_sar += chroma_xres_virtual * (chroma_yres - 1);
-+ v_sar += chroma_xres_virtual * (chroma_yres - 1);
-+ }
-+
-+ dev_dbg(info->device, "%s:\n", __func__);
-+ dev_dbg(info->device, " * y_sar = 0x%x\n", y_sar);
-+ dev_dbg(info->device, " * u_sar = 0x%x\n", u_sar);
-+ dev_dbg(info->device, " * v_sar = 0x%x\n", v_sar);
-+ dev_dbg(info->device, " * o1_sar = 0x%x\n", o1_sar);
-+ dev_dbg(info->device, " * o2_sar = 0x%x\n", o2_sar);
-+ dev_dbg(info->device, " * cursor_sar = 0x%x\n", cursor_sar);
-+
-+ mpop_writel(sinfo, ATMEL_MPOP_Y_SAR, y_sar);
-+ mpop_writel(sinfo, ATMEL_MPOP_U_SAR, u_sar);
-+ mpop_writel(sinfo, ATMEL_MPOP_V_SAR, v_sar);
-+ mpop_writel(sinfo, ATMEL_MPOP_O1_SAR, o1_sar);
-+ mpop_writel(sinfo, ATMEL_MPOP_O2_SAR, o2_sar);
-+ mpop_writel(sinfo, ATMEL_MPOP_CURSOR_SAR, cursor_sar);
-+}
-+
-+static void atmel_mpopfb_free_video_memory(struct atmel_mpopfb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+
-+ dma_free_writecombine(info->device, info->fix.smem_len,
-+ (void __force *)info->screen_base,
-+ info->fix.smem_start);
-+}
-+
-+/**
-+ * atmel_mpopfb_alloc_video_memory - Allocate framebuffer memory
-+ * @sinfo: the frame buffer to allocate memory for
-+ */
-+static int atmel_mpopfb_alloc_video_memory(struct atmel_mpopfb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+ struct fb_var_screeninfo *var = &info->var;
-+
-+ info->fix.smem_len = (var->xres_virtual * var->yres_virtual
-+ * ((var->bits_per_pixel + 7) / 8));
-+
-+ info->screen_base
-+ = (void __iomem __force *)dma_alloc_writecombine(info->device,
-+ info->fix.smem_len,
-+ (dma_addr_t *)&info->fix.smem_start,
-+ GFP_KERNEL);
-+
-+ if (!info->screen_base)
-+ return -ENOMEM;
-+
-+ return 0;
-+}
-+
-+/**
-+ * atmel_mpopfb_check_var - Validates a var passed in.
-+ * @var: frame buffer variable screen structure
-+ * @info: frame buffer structure that represents a single frame buffer
-+ *
-+ * Checks to see if the hardware supports the state requested by
-+ * var passed in. This function does not alter the hardware
-+ * state!!! This means the data stored in struct fb_info and
-+ * struct atmel_mpopfb_info do not change. This includes the var
-+ * inside of struct fb_info. Do NOT change these. This function
-+ * can be called on its own if we intent to only test a mode and
-+ * not actually set it. The stuff in modedb.c is a example of
-+ * this. If the var passed in is slightly off by what the
-+ * hardware can support then we alter the var PASSED in to what
-+ * we can do. If the hardware doesn't support mode change a
-+ * -EINVAL will be returned by the upper layers. You don't need
-+ * to implement this function then. If you hardware doesn't
-+ * support changing the resolution then this function is not
-+ * needed. In this case the driver would just provide a var that
-+ * represents the static state the screen is in.
-+ *
-+ * Returns negative errno on error, or zero on success.
-+ */
-+static int atmel_mpopfb_check_var(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ struct device *dev = info->device;
-+ struct atmel_mpopfb_info *sinfo = info->par;
-+ struct fb_info *lcdc_info = platform_get_drvdata(sinfo->lcdc_pdev);
-+
-+ dev_dbg(dev, "%s:\n", __func__);
-+ dev_dbg(dev, " resolution: %ux%u\n", var->xres, var->yres);
-+ dev_dbg(dev, " offset: (%u,%u)\n", var->xoffset, var->yoffset);
-+ dev_dbg(dev, " bpp: %u\n", var->bits_per_pixel);
-+
-+ /*
-+ * FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal!
-+ * as FB_VMODE_SMOOTH_XPAN is only used internally
-+ */
-+
-+ if (var->vmode & FB_VMODE_CONUPDATE) {
-+ var->vmode |= FB_VMODE_YWRAP;
-+ var->xoffset = info->var.xoffset;
-+ var->yoffset = info->var.yoffset;
-+ }
-+
-+ /* Horizontal size must be a multiple of 16 pixels */
-+
-+ /*
-+ * Some very basic checks
-+ */
-+ if (!var->xres)
-+ var->xres = 1;
-+ if (!var->yres)
-+ var->yres = 1;
-+ if (var->xres > var->xres_virtual)
-+ var->xres_virtual = var->xres;
-+ if (var->yres > var->yres_virtual)
-+ var->yres_virtual = var->yres;
-+ if (var->bits_per_pixel > 16)
-+ var->bits_per_pixel = 24;
-+ else if (var->bits_per_pixel > 12)
-+ var->bits_per_pixel = 16;
-+ else
-+ var->bits_per_pixel = 12;
-+
-+ /* Horizontal size and offset must be a multiple of 16 pixels */
-+ var->xres = (var->xres + 15) & ~15UL;
-+ var->xres_virtual = (var->xres_virtual + 15) & ~15UL;
-+ var->xoffset = (var->xoffset + 15) & ~15UL;
-+
-+ if (var->xres_virtual < var->xoffset + var->xres)
-+ var->xres_virtual = var->xoffset + var->xres;
-+ if (var->yres_virtual < var->yoffset + var->yres)
-+ var->yres_virtual = var->yoffset + var->yres;
-+
-+ /* Check that the scaled image will fit into the LCD display. */
-+ if (sinfo->baseimg_info.xsize > lcdc_info->var.xres) {
-+ dev_err(dev, "baseimage is wider than screen: %d > %d\n",
-+ sinfo->baseimg_info.xsize, lcdc_info->var.xres);
-+ return -EINVAL;
-+ }
-+
-+ if (sinfo->baseimg_info.ysize > lcdc_info->var.yres) {
-+ dev_err(dev, "baseimage is higher than screen: %d > %d\n",
-+ sinfo->baseimg_info.ysize, lcdc_info->var.yres);
-+ return -EINVAL;
-+ }
-+
-+ /* Check that it is possible to scale to given size. */
-+ if (ATMEL_MPOP_CALC_SCALE(var->xres, sinfo->baseimg_info.xsize) == 0
-+ || (ATMEL_MPOP_CALC_SCALE(var->xres,
-+ sinfo->baseimg_info.xsize)
-+ > (4 << ATMEL_MPOP_RESIZE_FRAC_BITS))) {
-+ dev_err(dev, "cannot scale from width %d to %d Max %s\n",
-+ var->xres, sinfo->baseimg_info.xsize,
-+ ATMEL_MPOP_CALC_SCALE(var->xres,
-+ sinfo->baseimg_info.xsize)
-+ ? "downscale factor is 4!"
-+ : "upscale factor is 32");
-+ return -EINVAL;
-+ }
-+
-+ if (ATMEL_MPOP_CALC_SCALE(var->yres, sinfo->baseimg_info.ysize) == 0
-+ || (ATMEL_MPOP_CALC_SCALE(var->yres,
-+ sinfo->baseimg_info.ysize)
-+ > (4 << ATMEL_MPOP_RESIZE_FRAC_BITS))) {
-+ dev_err(dev, "cannot scale from height %d to %d Max %s\n",
-+ var->yres, sinfo->baseimg_info.ysize,
-+ ATMEL_MPOP_CALC_SCALE(var->yres,
-+ sinfo->baseimg_info.ysize)
-+ ? "downscale factor is 4!"
-+ : "upscale factor is 32");
-+ return -EINVAL;
-+ }
-+
-+ var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
-+ var->transp.msb_right = 0;
-+ var->transp.offset = var->transp.length = 0;
-+
-+ switch (var->bits_per_pixel) {
-+ case 12:
-+ case 16:
-+ case 24:
-+ var->red.offset = 0;
-+ var->green.offset = 8;
-+ var->blue.offset = 16;
-+ var->red.length = var->green.length = var->blue.length = 8;
-+ break;
-+ default:
-+ dev_err(dev, "color depth %d not supported\n",
-+ var->bits_per_pixel);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static void atmel_mpopfb_start(struct atmel_mpopfb_info *sinfo)
-+{
-+ if (!sinfo->running) {
-+ dev_dbg(sinfo->info->device, " * Starting MPOP.\n");
-+
-+ /* Enable all error interrupts. */
-+ mpop_writel(sinfo, ATMEL_MPOP_INTEN, 0x7);
-+
-+ /*
-+ * Enable the MPOP. When the LCD controller starts
-+ * reading from the slave interface it will start
-+ * generating a frame.
-+ */
-+ mpop_writel(sinfo, ATMEL_MPOP_CR,
-+ ATMEL_MPOP_CR_EN_MASK
-+ /*| ATMEL_MPOP_CR_OUT_BGR_MASK */ );
-+
-+ sinfo->running = 1;
-+ }
-+}
-+
-+static void atmel_mpopfb_stop(struct atmel_mpopfb_info *sinfo)
-+{
-+ if (!sinfo->running)
-+ /* Not running. Already stopped. */
-+ return;
-+
-+ dev_dbg(sinfo->info->device, "Stopping MPOP.\n");
-+
-+ /* Disable the MPOP. This will force the MPOP to be reset. */
-+ mpop_writel(sinfo, ATMEL_MPOP_CR, 0);
-+
-+ /* Disable all interrupts. */
-+ mpop_writel(sinfo, ATMEL_MPOP_INTDIS, ~0UL);
-+
-+ /* Looks like we stopped the MPOP... */
-+ dev_dbg(sinfo->info->device, "MPOP stopped.\n");
-+
-+ sinfo->running = 0;
-+}
-+
-+static void atmel_mpopfb_connect_to_lcdc(struct atmel_mpopfb_info *sinfo)
-+{
-+ struct fb_info *lcdc_info = platform_get_drvdata(sinfo->lcdc_pdev);
-+
-+ dev_dbg(sinfo->info->device, "Connecting MPOP to LCDC:\n");
-+
-+ /* Start the mpop if it is not running. */
-+ atmel_mpopfb_start(sinfo);
-+
-+ if (sinfo->connected_to_lcdc)
-+ /* Already connected. */
-+ return;
-+
-+ /*
-+ * Set framebuffer pointer in LCDC to point to the slave
-+ * interface of the MPOP.
-+ */
-+ dev_dbg(sinfo->info->device, " * Attaching to LCDC.\n");
-+ sinfo->lcdc_old_smem_start = lcdc_info->fix.smem_start;
-+ lcdc_info->fix.smem_start = (unsigned long)sinfo->slave_base;
-+ sinfo->lcdc_old_bits_per_pixel = lcdc_info->var.bits_per_pixel;
-+ lcdc_info->var.bits_per_pixel = 32;
-+
-+ /* Force the LCDC to change the configuration. */
-+ lcdc_info->fbops->fb_set_par(lcdc_info);
-+
-+ sinfo->connected_to_lcdc = 1;
-+}
-+
-+static void atmel_mpopfb_disconnect_from_lcdc(struct atmel_mpopfb_info *sinfo)
-+{
-+ struct fb_info *lcdc_info = platform_get_drvdata(sinfo->lcdc_pdev);
-+
-+ dev_dbg(sinfo->info->device, "Disconnecting MPOP from LCDC:\n");
-+
-+ if (!sinfo->connected_to_lcdc)
-+ /* Already disconnected. */
-+ return;
-+
-+ /* Restore lcdc's old framebuffer pointer and pixel-format. */
-+ lcdc_info->fix.smem_start = sinfo->lcdc_old_smem_start;
-+ lcdc_info->var.bits_per_pixel = sinfo->lcdc_old_bits_per_pixel;
-+
-+ /* Force the LCDC to change the configuration. */
-+ lcdc_info->fbops->fb_set_par(lcdc_info);
-+
-+ sinfo->connected_to_lcdc = 0;
-+
-+ /* We must stop the mpop to reset it. */
-+ atmel_mpopfb_stop(sinfo);
-+}
-+
-+static void atmel_mpopfb_put_overlay_palette(struct atmel_mpopfb_info *sinfo,
-+ struct atmel_mpopfb_overlay_palette *palette)
-+{
-+ int i;
-+
-+ dev_dbg(sinfo->info->device, "Overlay palette = :\n");
-+ for (i = 0; i < 256; i++) {
-+ dev_dbg(sinfo->info->device, "%d -> 0x%x\n", i,
-+ *((int *)&palette->entry[i]));
-+ mpop_writel(sinfo, ATMEL_MPOP_PALETTEDATA + 4 * i,
-+ *((int *)&palette->entry[i]));
-+ }
-+}
-+
-+static void atmel_mpopfb_get_overlay_palette(struct atmel_mpopfb_info *sinfo,
-+ struct atmel_mpopfb_overlay_palette *palette)
-+{
-+ int i;
-+
-+ for (i = 0; i < 256; i++)
-+ *((int *)&palette->entry[i]) =
-+ mpop_readl(sinfo, ATMEL_MPOP_PALETTEDATA + 4 * i);
-+}
-+
-+static void atmel_mpopfb_put_cursor_palette(struct atmel_mpopfb_info *sinfo,
-+ struct atmel_mpopfb_cursor_palette *palette)
-+{
-+ int i;
-+ for (i = 0; i < 4; i++)
-+ mpop_writel(sinfo, ATMEL_MPOP_CURSOR_P0 + 4 * i,
-+ *((int *)&palette->entry[i]));
-+}
-+
-+static void atmel_mpopfb_get_cursor_palette(struct atmel_mpopfb_info *sinfo,
-+ struct atmel_mpopfb_cursor_palette *palette)
-+{
-+ int i;
-+ for (i = 0; i < 4; i++)
-+ *((int *)&palette->entry[i])
-+ = mpop_readl(sinfo, ATMEL_MPOP_CURSOR_P0 + 4 * i);
-+}
-+
-+/**
-+ * atmel_mpopfb_set_par - Alters the hardware state.
-+ * @info: frame buffer structure that represents a single frame buffer
-+ *
-+ * Using the fb_var_screeninfo in fb_info we set the resolution
-+ * of the this particular framebuffer. This function alters the
-+ * par AND the fb_fix_screeninfo stored in fb_info. It doesn't
-+ * not alter var in fb_info since we are using that data. This
-+ * means we depend on the data in var inside fb_info to be
-+ * supported by the hardware. atmel_lcdfb_check_var is always called
-+ * before atmel_lcdfb_set_par to ensure this. Again if you can't
-+ * change the resolution you don't need this function.
-+ *
-+ */
-+static int atmel_mpopfb_set_par(struct fb_info *info)
-+{
-+ struct atmel_mpopfb_info *sinfo = info->par;
-+ struct fb_info *lcdc_info = platform_get_drvdata(sinfo->lcdc_pdev);
-+ struct fb_var_screeninfo *var = &info->var;
-+
-+ u32 yuv_format;
-+ u32 xscale, yscale;
-+
-+ dev_dbg(info->device, "%s:\n", __func__);
-+ dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n",
-+ info->var.xres, info->var.yres,
-+ info->var.xres_virtual, info->var.yres_virtual);
-+ dev_dbg(info->device, " * offset: (%u,%u)\n",
-+ info->var.xoffset, info->var.yoffset);
-+ dev_dbg(info->device, " * bpp: %u\n", info->var.bits_per_pixel);
-+
-+ /* Setup the output picture size. We must use the size of the lcdcfb. */
-+ dev_dbg(info->device, " * output frame resolution: %ux%u \n",
-+ lcdc_info->var.xres, lcdc_info->var.yres);
-+ mpop_writel(sinfo, ATMEL_MPOP_DISP_MAX_COORD,
-+ ((lcdc_info->var.xres - 1) << ATMEL_MPOP_DISP_MAX_COORD_X_OFFSET)
-+ | ((lcdc_info->var.yres - 1) << ATMEL_MPOP_DISP_MAX_COORD_Y_OFFSET));
-+
-+ /* Setup base picture. */
-+
-+ switch (var->bits_per_pixel) {
-+ default:
-+ case 12:
-+ yuv_format = ATMEL_MPOP_YUVFORMAT_420;
-+ break;
-+ case 16:
-+ yuv_format = ATMEL_MPOP_YUVFORMAT_422;
-+ break;
-+ case 24:
-+ yuv_format = ATMEL_MPOP_YUVFORMAT_444;
-+ break;
-+ }
-+
-+ xscale = ATMEL_MPOP_CALC_SCALE(info->var.xres, sinfo->baseimg_info.xsize);
-+ yscale = ATMEL_MPOP_CALC_SCALE(info->var.yres, sinfo->baseimg_info.ysize);
-+
-+ dev_dbg(info->device, " * baseimg output size = %ux%u \n",
-+ sinfo->baseimg_info.xsize, sinfo->baseimg_info.ysize);
-+ dev_dbg(info->device, " * resize scales = %ux%u \n", xscale, yscale);
-+ dev_dbg(info->device, " * yuv format = %u \n", yuv_format);
-+ mpop_writel(sinfo, ATMEL_MPOP_YCR,
-+ yuv_format << ATMEL_MPOP_YCR_YUVFORMAT_OFFSET
-+ | xscale << ATMEL_MPOP_YCR_XRESIZE_OFFSET
-+ | yscale << ATMEL_MPOP_YCR_YRESIZE_OFFSET);
-+
-+ /* Setup conversion coefficients. */
-+ mpop_writel(sinfo, ATMEL_MPOP_R2R1,
-+ ((sinfo->rgbconv_coeffs.r1 << ATMEL_MPOP_R1_OFFSET) & ATMEL_MPOP_R1_MASK)
-+ | ((sinfo->rgbconv_coeffs.r2 << ATMEL_MPOP_R2_OFFSET) & ATMEL_MPOP_R2_MASK));
-+ mpop_writel(sinfo, ATMEL_MPOP_R4R3,
-+ ((sinfo->rgbconv_coeffs.r3 << ATMEL_MPOP_R3_OFFSET) & ATMEL_MPOP_R3_MASK)
-+ | ((sinfo->rgbconv_coeffs.r4 << ATMEL_MPOP_R4_OFFSET) & ATMEL_MPOP_R4_MASK));
-+ mpop_writel(sinfo, ATMEL_MPOP_G2G1,
-+ ((sinfo->rgbconv_coeffs.g1 << ATMEL_MPOP_G1_OFFSET) & ATMEL_MPOP_G1_MASK)
-+ | ((sinfo->rgbconv_coeffs.g2 << ATMEL_MPOP_G2_OFFSET) & ATMEL_MPOP_G2_MASK));
-+ mpop_writel(sinfo, ATMEL_MPOP_G4G3,
-+ ((sinfo->rgbconv_coeffs.g3 << ATMEL_MPOP_G3_OFFSET) & ATMEL_MPOP_G3_MASK)
-+ | ((sinfo->rgbconv_coeffs.g4 << ATMEL_MPOP_G4_OFFSET) & ATMEL_MPOP_G4_MASK));
-+ mpop_writel(sinfo, ATMEL_MPOP_B2B1,
-+ ((sinfo->rgbconv_coeffs.b1 << ATMEL_MPOP_B1_OFFSET) & ATMEL_MPOP_B1_MASK)
-+ | ((sinfo->rgbconv_coeffs.b2 << ATMEL_MPOP_B2_OFFSET) & ATMEL_MPOP_B2_MASK));
-+ mpop_writel(sinfo, ATMEL_MPOP_B4B3,
-+ ((sinfo->rgbconv_coeffs.b3 << ATMEL_MPOP_B3_OFFSET) & ATMEL_MPOP_B3_MASK)
-+ | ((sinfo->rgbconv_coeffs.b4 << ATMEL_MPOP_B4_OFFSET) & ATMEL_MPOP_B4_MASK));
-+
-+ info->fix.line_length = info->var.xres_virtual;
-+ info->fix.visual = FB_VISUAL_TRUECOLOR;
-+
-+ /* Setup stride. We can flip the image by negating the
-+ stride, but we must then set the SAR registers to point
-+ to the last line in the image. */
-+ if (sinfo->baseimg_info.flip) {
-+ dev_dbg(info->device, " * flip \n");
-+ mpop_writel(sinfo, ATMEL_MPOP_STRIDE, -info->var.xres_virtual);
-+ } else
-+ mpop_writel(sinfo, ATMEL_MPOP_STRIDE, info->var.xres_virtual);
-+
-+ /* Setup input image size. */
-+ mpop_writel(sinfo, ATMEL_MPOP_YUV_MAX_COORD,
-+ ((info->var.xres - 1) << ATMEL_MPOP_YUV_MAX_COORD_X_OFFSET)
-+ | ((info->var.yres - 1) << ATMEL_MPOP_YUV_MAX_COORD_Y_OFFSET));
-+
-+ /* Setup size and position of output base image after scaling. */
-+ mpop_writel(sinfo, ATMEL_MPOP_RGB_SIZE,
-+ sinfo->baseimg_info.xsize << ATMEL_MPOP_RGB_SIZE_X_OFFSET
-+ | sinfo->baseimg_info.ysize << ATMEL_MPOP_RGB_SIZE_Y_OFFSET);
-+
-+ mpop_writel(sinfo, ATMEL_MPOP_RGB_POS,
-+ (sinfo->baseimg_info.xpos << ATMEL_MPOP_RGB_POS_X_OFFSET)
-+ | (sinfo->baseimg_info.ypos << ATMEL_MPOP_RGB_POS_Y_OFFSET));
-+
-+ dev_dbg(info->device, " * baseimg pos: (%u,%u) \n",
-+ sinfo->baseimg_info.xpos, sinfo->baseimg_info.ypos);
-+
-+ /* Setup Word Transfer Count. */
-+ mpop_writel(sinfo, ATMEL_MPOP_RGB_WTC,
-+ DIV_ROUND_UP(info->var.xres * info->var.yres
-+ * var->bits_per_pixel, 32));
-+
-+ /* Set overlay parameters. */
-+ mpop_writel(sinfo, ATMEL_MPOP_O1_POS,
-+ (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].xpos << ATMEL_MPOP_O1_POS_O1_POS_X)
-+ | (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].ypos << ATMEL_MPOP_O1_POS_O1_POS_Y));
-+ mpop_writel(sinfo, ATMEL_MPOP_O1_SIZE,
-+ (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].xsize << ATMEL_MPOP_O1_SIZE_O1_SIZE_X)
-+ | (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].ysize << ATMEL_MPOP_O1_SIZE_O1_SIZE_Y));
-+ mpop_writel(sinfo, ATMEL_MPOP_O1_WTC,
-+ DIV_ROUND_UP(sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].xsize
-+ * sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].ysize, 4));
-+
-+ mpop_writel(sinfo, ATMEL_MPOP_O2_POS,
-+ (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].xpos << ATMEL_MPOP_O2_POS_O2_POS_X)
-+ | (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].ypos << ATMEL_MPOP_O2_POS_O2_POS_Y));
-+ mpop_writel(sinfo, ATMEL_MPOP_O2_SIZE,
-+ (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].xsize << ATMEL_MPOP_O2_SIZE_O2_SIZE_X)
-+ | (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].ysize << ATMEL_MPOP_O2_SIZE_O2_SIZE_Y));
-+ mpop_writel(sinfo, ATMEL_MPOP_O2_WTC,
-+ DIV_ROUND_UP(sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].xsize *
-+ sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].ysize, 4));
-+
-+ mpop_writel(sinfo, ATMEL_MPOP_CURSOR_POS,
-+ (sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].xpos << ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X)
-+ | (sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].ypos << ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y));
-+ mpop_writel(sinfo, ATMEL_MPOP_CURSOR_SIZE,
-+ (sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].xsize << ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X)
-+ | (sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].ysize << ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y));
-+ mpop_writel(sinfo, ATMEL_MPOP_CURSOR_WTC,
-+ DIV_ROUND_UP(sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].xsize
-+ * sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].ysize, 16));
-+
-+ /* Enable base overlay + any other enabled overlays. */
-+ mpop_writel(sinfo, ATMEL_MPOP_OCR, ATMEL_MPOP_OCR_RGBEN_MASK);
-+
-+ if (sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].enabled)
-+ mpop_writel(sinfo, ATMEL_MPOP_OCR,
-+ mpop_readl(sinfo, ATMEL_MPOP_OCR)
-+ | ATMEL_MPOP_OCR_CURSOREN_MASK);
-+ if (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].enabled)
-+ mpop_writel(sinfo, ATMEL_MPOP_OCR,
-+ mpop_readl(sinfo, ATMEL_MPOP_OCR)
-+ | ATMEL_MPOP_OCR_O1EN_MASK);
-+ if (sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].enabled)
-+ mpop_writel(sinfo, ATMEL_MPOP_OCR,
-+ mpop_readl(sinfo, ATMEL_MPOP_OCR)
-+ | ATMEL_MPOP_OCR_O2EN_MASK);
-+
-+ /* Set background to black. */
-+ mpop_writel(sinfo, ATMEL_MPOP_BGCOLOR, 0);
-+
-+ /* Setup source address registers */
-+ atmel_mpopfb_update_sar(info, &info->var);
-+
-+ dev_dbg(info->device, " * DONE\n");
-+
-+ return 0;
-+}
-+
-+static int atmel_mpopfb_pan_display(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ dev_dbg(info->device, "%s\n", __func__);
-+
-+ /* Change source address registers to reflect the panning. */
-+ atmel_mpopfb_update_sar(info, var);
-+
-+ return 0;
-+}
-+
-+static void atmel_mpopfb_put_overlay_info(struct fb_info *info,
-+ struct atmel_mpopfb_overlay_info overlay_info)
-+{
-+ struct atmel_mpopfb_info *sinfo = info->par;
-+
-+ /* We can update the position now since it is double buffered. */
-+ switch (overlay_info.overlay) {
-+ case ATMEL_MPOPFB_OVERLAY1:
-+ mpop_writel(sinfo, ATMEL_MPOP_O1_POS,
-+ (overlay_info.xpos << ATMEL_MPOP_O1_POS_O1_POS_X)
-+ | (overlay_info.ypos << ATMEL_MPOP_O1_POS_O1_POS_Y));
-+ break;
-+ case ATMEL_MPOPFB_OVERLAY2:
-+ mpop_writel(sinfo, ATMEL_MPOP_O2_POS,
-+ (overlay_info.xpos << ATMEL_MPOP_O2_POS_O2_POS_X)
-+ | (overlay_info.ypos << ATMEL_MPOP_O2_POS_O2_POS_Y));
-+ break;
-+ case ATMEL_MPOPFB_CURSOR:
-+ mpop_writel(sinfo, ATMEL_MPOP_CURSOR_POS,
-+ (overlay_info.xpos << ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X)
-+ | (overlay_info.ypos << ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y));
-+ break;
-+ default:
-+ dev_warn(info->device, "Unknown overlay type: %d\n",
-+ overlay_info.overlay);
-+ return;
-+ }
-+
-+ /* Copy the overlay info to the mpopfb info structure. */
-+ sinfo->overlay_info[overlay_info.overlay] = overlay_info;
-+}
-+
-+static int atmel_mpopfb_ioctl(struct fb_info *info,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ void __user *argp = (void __user *)arg;
-+ struct atmel_mpopfb_info *sinfo = info->par;
-+ struct atmel_mpopfb_overlay_info overlay_info;
-+
-+ switch (cmd) {
-+ case ATMEL_MPOP_FBIOPUT_OVERLAY_PALETTE:{
-+ struct atmel_mpopfb_overlay_palette palette;
-+ if (copy_from_user(&palette, argp, sizeof(palette)))
-+ return -EFAULT;
-+ atmel_mpopfb_put_overlay_palette(sinfo, &palette);
-+ return 0;
-+ }
-+ case ATMEL_MPOP_FBIOGET_OVERLAY_PALETTE:{
-+ struct atmel_mpopfb_overlay_palette palette;
-+ atmel_mpopfb_get_overlay_palette(sinfo, &palette);
-+ if (copy_to_user(argp, &palette, sizeof(palette)))
-+ return -EFAULT;
-+ return 0;
-+ }
-+ case ATMEL_MPOP_FBIOPUT_CURSOR_PALETTE:{
-+ struct atmel_mpopfb_cursor_palette palette;
-+ if (copy_from_user(&palette, argp, sizeof(palette)))
-+ return -EFAULT;
-+ atmel_mpopfb_put_cursor_palette(sinfo, &palette);
-+ return 0;
-+ }
-+ case ATMEL_MPOP_FBIOGET_CURSOR_PALETTE:{
-+ struct atmel_mpopfb_cursor_palette palette;
-+ atmel_mpopfb_get_cursor_palette(sinfo, &palette);
-+ if (copy_to_user(argp, &palette, sizeof(palette)))
-+ return -EFAULT;
-+ return 0;
-+ }
-+ case ATMEL_MPOP_FBIOPUT_OVERLAY_INFO:
-+ if (copy_from_user(&overlay_info, argp, sizeof(overlay_info)))
-+ return -EFAULT;
-+ atmel_mpopfb_put_overlay_info(info, overlay_info);
-+ return 0;
-+ case ATMEL_MPOP_FBIOPUT_BASEIMG_INFO:
-+ if (copy_from_user(&sinfo->baseimg_info, argp,
-+ sizeof(sinfo->baseimg_info)))
-+ return -EFAULT;
-+
-+ /* Check that new baseimg parameters are sane. */
-+ if (atmel_mpopfb_check_var(&info->var, info))
-+ return -EFAULT;
-+
-+ /* Update hardware configuration. */
-+ atmel_mpopfb_set_par(info);
-+ return 0;
-+ case ATMEL_MPOP_FBIOGET_BASEIMG_INFO:
-+ return copy_to_user(argp, &sinfo->baseimg_info,
-+ sizeof(sinfo->baseimg_info)) ? -EFAULT : 0;
-+ case ATMEL_MPOP_FBIOPUT_RGBCONV_COEFFS:
-+ if (copy_from_user(&sinfo->rgbconv_coeffs, argp,
-+ sizeof(sinfo->rgbconv_coeffs)))
-+ return -EFAULT;
-+
-+ /* Update hardware configuration. */
-+ if (atmel_mpopfb_set_par(info))
-+ return -EFAULT;
-+
-+ return 0;
-+ case ATMEL_MPOP_FBIOGET_RGBCONV_COEFFS:
-+ return copy_to_user(argp, &sinfo->rgbconv_coeffs,
-+ sizeof(sinfo->rgbconv_coeffs)) ? -EFAULT : 0;
-+ case ATMEL_MPOP_FBIO_CONNECT_TO_LCDC:
-+ atmel_mpopfb_connect_to_lcdc(sinfo);
-+ return 0;
-+ case ATMEL_MPOP_FBIO_DISCONNECT_FROM_LCDC:
-+ atmel_mpopfb_disconnect_from_lcdc(sinfo);
-+ return 0;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ /* Force MPOP to be updated with any new parameters. */
-+ atmel_mpopfb_set_par(info);
-+}
-+
-+static int atmel_mpopfb_setcolreg(unsigned int regno, unsigned int red,
-+ unsigned int green, unsigned int blue,
-+ unsigned int transp, struct fb_info *info)
-+{
-+ return 0;
-+}
-+
-+static struct fb_ops atmel_mpopfb_ops = {
-+ .owner = THIS_MODULE,
-+ .fb_check_var = atmel_mpopfb_check_var,
-+ .fb_set_par = atmel_mpopfb_set_par,
-+ .fb_setcolreg = atmel_mpopfb_setcolreg,
-+ .fb_pan_display = atmel_mpopfb_pan_display,
-+ .fb_imageblit = cfb_imageblit,
-+ .fb_ioctl = atmel_mpopfb_ioctl,
-+ .fb_fillrect = cfb_fillrect,
-+ .fb_copyarea = cfb_copyarea,
-+};
-+
-+static irqreturn_t atmel_mpopfb_interrupt(int irq, void *dev_id)
-+{
-+ struct fb_info *info = dev_id;
-+ struct atmel_mpopfb_info *sinfo = info->par;
-+ u32 status;
-+
-+ /* Check which interrupt we have. */
-+ status = mpop_readl(sinfo, ATMEL_MPOP_INTSTATUS);
-+
-+ /* Clear interrupts. */
-+ mpop_writel(sinfo, ATMEL_MPOP_INTCLEAR, status);
-+
-+ if (status & ATMEL_MPOP_EOP) {
-+ /* End Of Picture. Start new picture. */
-+ mpop_writel(sinfo, ATMEL_MPOP_CR,
-+ ATMEL_MPOP_CR_START_MASK
-+ | mpop_readl(sinfo, ATMEL_MPOP_CR));
-+ } else if (status & ATMEL_MPOP_OUT) {
-+ dev_err(info->dev,
-+ "MPOP Output DMA interface Bus Error (address=0x%x)!\n",
-+ mpop_readl(sinfo, ATMEL_MPOP_OUT_BEAR));
-+ } else if (status & ATMEL_MPOP_YUV) {
-+ dev_err(info->dev,
-+ "MPOP YUV Picture Fetch DMA interface Bus Error (address=0x%x)!\n",
-+ mpop_readl(sinfo, ATMEL_MPOP_YUV_BEAR));
-+ } else if (status & ATMEL_MPOP_OVERLAY) {
-+ dev_err(info->dev,
-+ "MPOP Overlay Picture Fetch DMA interface Bus Error (address=0x%x)!\n",
-+ mpop_readl(sinfo, ATMEL_MPOP_OVERLAY_BEAR));
-+ }
-+
-+ dev_dbg(info->device, "%s\n", __func__);
-+ dev_dbg(info->device, " * status: 0x%x \n", status);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init atmel_mpopfb_init_fbinfo(struct atmel_mpopfb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+ int ret = 0;
-+
-+ info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
-+
-+ dev_info(info->device,
-+ "%luKiB frame buffer at %08lx (mapped at %p)\n",
-+ (unsigned long)info->fix.smem_len / 1024,
-+ (unsigned long)info->fix.smem_start, info->screen_base);
-+
-+ return ret;
-+}
-+
-+static void atmel_mpopfb_start_clock(struct atmel_mpopfb_info *sinfo)
-+{
-+ clk_enable(sinfo->mpop_hclk);
-+ clk_enable(sinfo->mpop_pclk);
-+}
-+
-+static void atmel_mpopfb_stop_clock(struct atmel_mpopfb_info *sinfo)
-+{
-+ clk_disable(sinfo->mpop_hclk);
-+ clk_disable(sinfo->mpop_pclk);
-+}
-+
-+static int __init atmel_mpopfb_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info;
-+ struct fb_info *lcdc_info;
-+ struct atmel_mpopfb_info *sinfo;
-+ struct atmel_mpopfb_info *pdata_sinfo;
-+ struct resource *regs = NULL;
-+ struct resource *slave = NULL;
-+ struct resource *map = NULL;
-+ int ret;
-+
-+ dev_dbg(dev, "%s BEGIN\n", __func__);
-+
-+ ret = -ENOMEM;
-+ info = framebuffer_alloc(sizeof(struct atmel_mpopfb_info), dev);
-+ if (!info) {
-+ dev_err(dev, "cannot allocate memory\n");
-+ goto out;
-+ }
-+
-+ sinfo = info->par;
-+
-+ if (dev->platform_data) {
-+ pdata_sinfo = dev->platform_data;
-+ sinfo->lcdc_pdev = pdata_sinfo->lcdc_pdev;
-+ if (!sinfo->lcdc_pdev) {
-+ dev_err(dev, "cannot get hold of lcdcfb device\n");
-+ goto free_info;
-+ }
-+ } else {
-+ dev_err(dev, "cannot get default configuration\n");
-+ goto free_info;
-+ }
-+
-+ sinfo->info = info;
-+ sinfo->pdev = pdev;
-+ sinfo->running = 0;
-+ sinfo->connected_to_lcdc = 0;
-+ sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY1].enabled = 0;
-+ sinfo->overlay_info[ATMEL_MPOPFB_OVERLAY2].enabled = 0;
-+ sinfo->overlay_info[ATMEL_MPOPFB_CURSOR].enabled = 0;
-+
-+ /* Setup default info */
-+
-+ /* Set fb_var_screeninfo equal to that of the lcdcfb driver. */
-+ lcdc_info = (struct fb_info *)platform_get_drvdata(sinfo->lcdc_pdev);
-+ memcpy(&info->var, &lcdc_info->var, sizeof(struct fb_var_screeninfo));
-+
-+ /* Set default position of the image on the screen to (0,0) and
-+ no scaling */
-+ sinfo->baseimg_info.xpos = 0;
-+ sinfo->baseimg_info.ypos = 0;
-+ sinfo->baseimg_info.xsize = info->var.xres;
-+ sinfo->baseimg_info.ysize = info->var.yres;
-+
-+ /* Use YCbCr --> RGB converion per default. */
-+ memcpy(&sinfo->rgbconv_coeffs, &atmel_mpop_ycrcb2rgb_coeffs,
-+ sizeof(struct atmel_mpopfb_rgbconv_coeffs));
-+
-+ strcpy(info->fix.id, sinfo->pdev->name);
-+ info->flags = ATMEL_MPOPFB_FBINFO_DEFAULT;
-+ info->fbops = &atmel_mpopfb_ops;
-+
-+ //memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
-+ info->fix = atmel_mpopfb_fix;
-+
-+ /* Enable MPOP Clocks */
-+ sinfo->mpop_hclk = clk_get(dev, "hclk");
-+ sinfo->mpop_pclk = clk_get(dev, "pclk");
-+ if (IS_ERR(sinfo->mpop_hclk)) {
-+ ret = PTR_ERR(sinfo->mpop_hclk);
-+ goto put_bus_clk;
-+ }
-+ if (IS_ERR(sinfo->mpop_pclk)) {
-+ ret = PTR_ERR(sinfo->mpop_pclk);
-+ goto stop_clk;
-+ }
-+ atmel_mpopfb_start_clock(sinfo);
-+
-+ //ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
-+ // info->monspecs.modedb_len, info->monspecs.modedb,
-+ // sinfo->default_bpp);
-+ //if (!ret) {
-+ // dev_err(dev, "no suitable video mode found\n");
-+ // goto stop_clk;
-+ //}
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_err(dev, "resources unusable\n");
-+ ret = -ENXIO;
-+ goto stop_clk;
-+ }
-+
-+ slave = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+ if (!slave) {
-+ dev_err(dev, "slave interface memory resource unusable\n");
-+ ret = -ENXIO;
-+ goto stop_clk;
-+ }
-+ sinfo->slave_base = (void *)slave->start;
-+
-+ sinfo->irq_base = platform_get_irq(pdev, 0);
-+ if (sinfo->irq_base < 0) {
-+ dev_err(dev, "unable to get irq\n");
-+ ret = sinfo->irq_base;
-+ goto stop_clk;
-+ }
-+
-+ /* Initialize video memory */
-+ map = platform_get_resource(pdev, IORESOURCE_MEM, 2);
-+ if (map) {
-+ /* use a pre-allocated memory buffer */
-+ info->fix.smem_start = map->start;
-+ info->fix.smem_len = map->end - map->start + 1;
-+ if (!request_mem_region(info->fix.smem_start,
-+ info->fix.smem_len, pdev->name)) {
-+ //ret = -EBUSY;
-+ //goto stop_clk;
-+ /* Probably in use by LCD controller. */
-+ info->screen_base = lcdc_info->screen_base;
-+ } else {
-+ info->screen_base =
-+ ioremap(info->fix.smem_start, info->fix.smem_len);
-+ if (!info->screen_base)
-+ goto release_intmem;
-+ }
-+ } else {
-+ /* alocate memory buffer */
-+ ret = atmel_mpopfb_alloc_video_memory(sinfo);
-+ if (ret < 0) {
-+ dev_err(dev, "cannot allocate mpop framebuffer: %d\n",
-+ ret);
-+ goto stop_clk;
-+ }
-+ }
-+
-+ /* MPOP registers */
-+ info->fix.mmio_start = regs->start;
-+ info->fix.mmio_len = regs->end - regs->start + 1;
-+
-+ if (!request_mem_region(info->fix.mmio_start,
-+ info->fix.mmio_len, pdev->name)) {
-+ ret = -EBUSY;
-+ goto free_fb;
-+ }
-+
-+ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
-+ if (!sinfo->mmio) {
-+ dev_err(dev, "cannot map MPOP registers\n");
-+ goto release_mem;
-+ }
-+
-+ /* MPOP slave interface */
-+ if (!request_mem_region(slave->start,
-+ slave->end - slave->start + 1, pdev->name)) {
-+ dev_err(dev,
-+ "error requesting memory region for MPOP slave interface\n");
-+ ret = -EBUSY;
-+ goto unmap_mmio;
-+ }
-+
-+ /* interrupt */
-+ ret =
-+ request_irq(sinfo->irq_base, atmel_mpopfb_interrupt, 0, pdev->name,
-+ info);
-+ if (ret) {
-+ dev_err(dev, "request_irq failed: %d\n", ret);
-+ goto release_mem_slave;
-+ }
-+
-+ ret = atmel_mpopfb_init_fbinfo(sinfo);
-+ if (ret < 0) {
-+ dev_err(dev, "init fbinfo failed: %d\n", ret);
-+ goto unregister_irqs;
-+ }
-+
-+ /*
-+ * This makes sure that our colour bitfield
-+ * descriptors are correctly initialised.
-+ */
-+ atmel_mpopfb_check_var(&info->var, info);
-+
-+ ret = fb_set_var(info, &info->var);
-+ if (ret) {
-+ dev_warn(dev, "unable to set display parameters\n");
-+ goto free_cmap;
-+ }
-+
-+ dev_set_drvdata(dev, info);
-+
-+ /*
-+ * Tell the world that we're ready to go
-+ */
-+ ret = register_framebuffer(info);
-+ if (ret < 0) {
-+ dev_err(dev, "failed to register framebuffer device: %d\n",
-+ ret);
-+ goto free_cmap;
-+ }
-+
-+ dev_info(dev, "fb%d: Atmel MPOP at 0x%08lx (mapped at %p), irq %lu\n",
-+ info->node, info->fix.mmio_start, sinfo->mmio,
-+ sinfo->irq_base);
-+
-+ return 0;
-+
-+free_cmap:
-+ fb_dealloc_cmap(&info->cmap);
-+unregister_irqs:
-+ free_irq(sinfo->irq_base, info);
-+release_mem_slave:
-+ release_mem_region(slave->start, slave->end - slave->start + 1);
-+unmap_mmio:
-+ iounmap(sinfo->mmio);
-+release_mem:
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+free_fb:
-+ if (map)
-+ iounmap(info->screen_base);
-+ else
-+ atmel_mpopfb_free_video_memory(sinfo);
-+
-+release_intmem:
-+ if (map)
-+ release_mem_region(info->fix.smem_start, info->fix.smem_len);
-+stop_clk:
-+ atmel_mpopfb_stop_clock(sinfo);
-+ clk_put(sinfo->mpop_hclk);
-+put_bus_clk:
-+ if (sinfo->mpop_pclk)
-+ clk_put(sinfo->mpop_pclk);
-+free_info:
-+ framebuffer_release(info);
-+out:
-+ dev_dbg(dev, "%s FAILED\n", __func__);
-+ return ret;
-+}
-+
-+static int __exit atmel_mpopfb_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info = dev_get_drvdata(dev);
-+ struct atmel_mpopfb_info *sinfo = info->par;
-+
-+ if (!sinfo)
-+ return 0;
-+
-+ unregister_framebuffer(info);
-+ atmel_mpopfb_stop_clock(sinfo);
-+ clk_put(sinfo->mpop_hclk);
-+ clk_put(sinfo->mpop_pclk);
-+ fb_dealloc_cmap(&info->cmap);
-+ free_irq(sinfo->irq_base, info);
-+ iounmap(sinfo->mmio);
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+ if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
-+ iounmap(info->screen_base);
-+ release_mem_region(info->fix.smem_start, info->fix.smem_len);
-+ } else {
-+ atmel_mpopfb_free_video_memory(sinfo);
-+ }
-+
-+ dev_set_drvdata(dev, NULL);
-+ framebuffer_release(info);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver atmel_mpopfb_driver = {
-+ .remove = __exit_p(atmel_mpopfb_remove),
-+ .driver.name = "atmel_mpopfb",
-+ .driver.owner = THIS_MODULE,
-+};
-+
-+static int __init atmel_mpopfb_init(void)
-+{
-+ return platform_driver_probe(&atmel_mpopfb_driver, atmel_mpopfb_probe);
-+}
-+
-+static void __exit atmel_mpopfb_exit(void)
-+{
-+ platform_driver_unregister(&atmel_mpopfb_driver);
-+}
-+
-+module_init(atmel_mpopfb_init);
-+module_exit(atmel_mpopfb_exit);
-+
-+MODULE_DESCRIPTION("AT32 MPOP framebuffer driver");
-+MODULE_AUTHOR("Ronny Pedersen <rpedersen@atmel.com>");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
-index c510367..55a3a34 100644
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -221,12 +221,12 @@ config DAVINCI_WATCHDOG
-
- # AVR32 Architecture
-
--config AT32AP700X_WDT
-- tristate "AT32AP700x watchdog"
-- depends on CPU_AT32AP700X
-+config AT32_WDT
-+ tristate "AVR32 On-Chip Watchdog Timer"
-+ depends on AVR32
- help
-- Watchdog timer embedded into AT32AP700x devices. This will reboot
-- your system when the timeout is reached.
-+ Watchdog timer embedded into AT32AP700x and similar devices.
-+ This will reboot your system when the timeout is reached.
-
- # BLACKFIN Architecture
-
-diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
-index e0ef123..7db92cd 100644
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -43,7 +43,7 @@ obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
- # ARM26 Architecture
-
- # AVR32 Architecture
--obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
-+obj-$(CONFIG_AT32_WDT) += at32_wdt.o
-
- # BLACKFIN Architecture
- obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o
-diff --git a/drivers/watchdog/at32_wdt.c b/drivers/watchdog/at32_wdt.c
-new file mode 100644
-index 0000000..bbdb997
---- /dev/null
-+++ b/drivers/watchdog/at32_wdt.c
-@@ -0,0 +1,620 @@
-+/*
-+ * Watchdog driver for Atmel AVR32 devices
-+ *
-+ * Copyright (C) 2005-2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ *
-+ * AT32AP700x Errata: WDT Clear is blocked after WDT Reset
-+ *
-+ * A watchdog timer event will, after reset, block writes to the WDT_CLEAR
-+ * register, preventing the program to clear the next Watchdog Timer Reset.
-+ *
-+ * If you still want to use the WDT after a WDT reset a small code can be
-+ * insterted at the startup checking the AVR32_PM.rcause register for WDT reset
-+ * and use a GPIO pin to reset the system. This method requires that one of the
-+ * GPIO pins are available and connected externally to the RESET_N pin. After
-+ * the GPIO pin has pulled down the reset line the GPIO will be reset and leave
-+ * the pin tristated with pullup.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/miscdevice.h>
-+#include <linux/fs.h>
-+#include <linux/platform_device.h>
-+#include <linux/watchdog.h>
-+#include <linux/uaccess.h>
-+#include <linux/io.h>
-+#include <linux/log2.h>
-+#include <linux/spinlock.h>
-+
-+#include <mach/cpu.h>
-+#include <mach/pm.h>
-+
-+/*
-+ * AT32AP700x uses a 16-bit prescaler. This limits the timeout range
-+ * somewhat. Later chips use a 32-bit prescaler.
-+ */
-+#define TIMEOUT_MIN 1
-+#ifdef CONFIG_CPU_AT32AP700X
-+# define TIMEOUT_MAX 2
-+# define TIMEOUT_DEFAULT TIMEOUT_MAX
-+#else
-+# define TIMEOUT_MAX 131072
-+# define TIMEOUT_DEFAULT 64
-+#endif
-+
-+/* module parameters */
-+static int timeout = TIMEOUT_DEFAULT;
-+module_param(timeout, int, 0);
-+MODULE_PARM_DESC(timeout,
-+ "Timeout value. Any power of two between 1 and "
-+ __MODULE_STRING(TIMEOUT_MAX) " seconds. (default="
-+ __MODULE_STRING(TIMEOUT_DEFAULT) ")");
-+
-+static int nowayout = WATCHDOG_NOWAYOUT;
-+module_param(nowayout, int, 0);
-+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
-+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-+
-+/* Watchdog registers and write/read macro */
-+#define WDT_CTRL 0x00
-+#define WDT_CTRL_EN 0
-+#define WDT_CTRL_PSEL 8
-+#define WDT_CTRL_CEN 16
-+#define WDT_CTRL_CSEL 17
-+#define WDT_CTRL_KEY 24
-+
-+#define WDT_CLR 0x04
-+
-+#define WDT_BIT(name) (1 << WDT_##name)
-+#define WDT_BF(name, value) ((value) << WDT_##name)
-+
-+#define wdt_readl(dev, reg) \
-+ __raw_readl((dev)->regs + WDT_##reg)
-+#define wdt_writel(dev, reg, value) \
-+ __raw_writel((value), (dev)->regs + WDT_##reg)
-+
-+struct wdt_at32 {
-+ void __iomem *regs;
-+ struct clk *pclk;
-+ struct clk *src_clk;
-+ spinlock_t io_lock;
-+ int timeout;
-+ int boot_status;
-+ unsigned long users;
-+ struct miscdevice miscdev;
-+};
-+
-+static struct wdt_at32 *wdt;
-+static char expect_release;
-+
-+static inline void wdt_clk_enable(struct wdt_at32 *w)
-+{
-+ if (!cpu_is_at32ap7000())
-+ clk_enable(w->pclk);
-+}
-+
-+static inline void wdt_clk_disable(struct wdt_at32 *w)
-+{
-+ if (!cpu_is_at32ap7000())
-+ clk_disable(w->pclk);
-+}
-+
-+static inline int at32_wdt_version(void)
-+{
-+ if (cpu_is_at32ap7000())
-+ return 1;
-+ if (cpu_is_at32ap7200())
-+ return 3;
-+
-+ BUG();
-+}
-+
-+static unsigned long at32_wdt_calc_psel(int timeout)
-+{
-+ if (at32_wdt_version() == 1)
-+ /* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
-+ return (timeout > 1) ? 0xf : 0xe;
-+
-+ return order_base_2(timeout) + 14;
-+}
-+
-+/*
-+ * Disable the watchdog.
-+ */
-+static inline void at32_wdt_stop(void)
-+{
-+ unsigned long ctrl;
-+ unsigned long ctrl_mask = 0;
-+
-+ switch (at32_wdt_version()) {
-+ case 3:
-+ ctrl_mask |= (1 << WDT_CTRL_CEN) | (1 << WDT_CTRL_CSEL);
-+ /* fall through */
-+ case 2:
-+ ctrl_mask |= 0x1f << WDT_CTRL_PSEL;
-+ break;
-+ case 1:
-+ ctrl_mask |= 0x0f << WDT_CTRL_PSEL;
-+ break;
-+ }
-+
-+ wdt_clk_enable(wdt);
-+ spin_lock(&wdt->io_lock);
-+ ctrl = wdt_readl(wdt, CTRL);
-+ ctrl &= ctrl_mask;
-+ wdt_writel(wdt, CTRL, ctrl | WDT_BF(CTRL_KEY, 0x55));
-+ wdt_writel(wdt, CTRL, ctrl | WDT_BF(CTRL_KEY, 0xaa));
-+ spin_unlock(&wdt->io_lock);
-+ wdt_clk_disable(wdt);
-+}
-+
-+/*
-+ * Enable and reset the watchdog.
-+ */
-+static inline void at32_wdt_start(void)
-+{
-+ unsigned long psel;
-+ unsigned long ctrl;
-+
-+ psel = at32_wdt_calc_psel(wdt->timeout);
-+ ctrl = WDT_BIT(CTRL_EN) | WDT_BF(CTRL_PSEL, psel);
-+
-+ if (at32_wdt_version() >= 3)
-+ ctrl |= wdt_readl(wdt, CTRL)
-+ & (WDT_BIT(CTRL_CSEL) | WDT_BIT(CTRL_CEN));
-+
-+ wdt_clk_enable(wdt);
-+ spin_lock(&wdt->io_lock);
-+ wdt_writel(wdt, CTRL, ctrl | WDT_BF(CTRL_KEY, 0x55));
-+ wdt_writel(wdt, CTRL, ctrl | WDT_BF(CTRL_KEY, 0xaa));
-+ spin_unlock(&wdt->io_lock);
-+ wdt_clk_disable(wdt);
-+}
-+
-+/*
-+ * Pat the watchdog timer.
-+ */
-+static inline void at32_wdt_pat(void)
-+{
-+ wdt_clk_enable(wdt);
-+ spin_lock(&wdt->io_lock);
-+ wdt_writel(wdt, CLR, 0x42);
-+ spin_unlock(&wdt->io_lock);
-+ wdt_clk_disable(wdt);
-+}
-+
-+/*
-+ * Watchdog device is opened, and watchdog starts running.
-+ */
-+static int at32_wdt_open(struct inode *inode, struct file *file)
-+{
-+ if (test_and_set_bit(1, &wdt->users))
-+ return -EBUSY;
-+
-+ at32_wdt_start();
-+ return nonseekable_open(inode, file);
-+}
-+
-+/*
-+ * Close the watchdog device.
-+ */
-+static int at32_wdt_close(struct inode *inode, struct file *file)
-+{
-+ if (expect_release == 42) {
-+ at32_wdt_stop();
-+ } else {
-+ dev_dbg(wdt->miscdev.parent,
-+ "unexpected close, not stopping watchdog!\n");
-+ at32_wdt_pat();
-+ }
-+ clear_bit(1, &wdt->users);
-+ expect_release = 0;
-+ return 0;
-+}
-+
-+/*
-+ * Change the watchdog time interval.
-+ */
-+static int at32_wdt_settimeout(int time)
-+{
-+ /*
-+ * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max
-+ * prescaler is 2 ^ 16 (or 2 ^ 32) allowing up to TIMEOUT_MAX
-+ * seconds timeout.
-+ */
-+ if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX)
-+ || !is_power_of_2(time))
-+ return -EINVAL;
-+
-+ /*
-+ * Set new watchdog time. It will be used when at32_wdt_start() is
-+ * called.
-+ */
-+ wdt->timeout = time;
-+ return 0;
-+}
-+
-+/*
-+ * Get the watchdog status.
-+ */
-+static int at32_wdt_get_status(void)
-+{
-+ int rcause;
-+ int status = 0;
-+
-+ rcause = at32_get_reset_cause();
-+
-+ switch (rcause) {
-+ case AT32_RCAUSE_BOD:
-+ status = WDIOF_POWERUNDER;
-+ break;
-+ case AT32_RCAUSE_EXT:
-+ status = WDIOF_EXTERN1;
-+ break;
-+ case AT32_RCAUSE_JTAG:
-+ case AT32_RCAUSE_JTAGHARD:
-+ case AT32_RCAUSE_OCDRST:
-+ status = WDIOF_EXTERN2;
-+ break;
-+ case AT32_RCAUSE_WDT:
-+ status = WDIOF_CARDRESET;
-+ break;
-+ case AT32_RCAUSE_POR:
-+ case AT32_RCAUSE_NTAE:
-+ case AT32_RCAUSE_SLEEP:
-+ case AT32_RCAUSE_CPUERR:
-+ default:
-+ break;
-+ }
-+
-+ return status;
-+}
-+
-+static struct watchdog_info at32_wdt_info = {
-+ .identity = "at32 watchdog",
-+ .options = WDIOF_SETTIMEOUT |
-+ WDIOF_KEEPALIVEPING |
-+ WDIOF_MAGICCLOSE,
-+};
-+
-+/*
-+ * Handle commands from user-space.
-+ */
-+static long at32_wdt_ioctl(struct file *file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ int ret = -ENOTTY;
-+ int time;
-+ void __user *argp = (void __user *)arg;
-+ int __user *p = argp;
-+
-+ switch (cmd) {
-+ case WDIOC_GETSUPPORT:
-+ ret = copy_to_user(argp, &at32_wdt_info,
-+ sizeof(at32_wdt_info)) ? -EFAULT : 0;
-+ break;
-+ case WDIOC_GETSTATUS:
-+ ret = put_user(0, p);
-+ break;
-+ case WDIOC_GETBOOTSTATUS:
-+ ret = put_user(wdt->boot_status, p);
-+ break;
-+ case WDIOC_SETOPTIONS:
-+ ret = get_user(time, p);
-+ if (ret)
-+ break;
-+ if (time & WDIOS_DISABLECARD)
-+ at32_wdt_stop();
-+ if (time & WDIOS_ENABLECARD)
-+ at32_wdt_start();
-+ ret = 0;
-+ break;
-+ case WDIOC_KEEPALIVE:
-+ at32_wdt_pat();
-+ ret = 0;
-+ break;
-+ case WDIOC_SETTIMEOUT:
-+ ret = get_user(time, p);
-+ if (ret)
-+ break;
-+ ret = at32_wdt_settimeout(time);
-+ if (ret)
-+ break;
-+ /* Enable new time value */
-+ at32_wdt_start();
-+ /* fall through */
-+ case WDIOC_GETTIMEOUT:
-+ ret = put_user(wdt->timeout, p);
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+static ssize_t at32_wdt_write(struct file *file, const char __user *data,
-+ size_t len, loff_t *ppos)
-+{
-+ /* See if we got the magic character 'V' and reload the timer */
-+ if (len) {
-+ if (!nowayout) {
-+ size_t i;
-+
-+ /*
-+ * note: just in case someone wrote the magic
-+ * character five months ago...
-+ */
-+ expect_release = 0;
-+
-+ /*
-+ * scan to see whether or not we got the magic
-+ * character
-+ */
-+ for (i = 0; i != len; i++) {
-+ char c;
-+ if (get_user(c, data + i))
-+ return -EFAULT;
-+ if (c == 'V')
-+ expect_release = 42;
-+ }
-+ }
-+ /* someone wrote to us, we should pat the watchdog */
-+ at32_wdt_pat();
-+ }
-+ return len;
-+}
-+
-+static const struct file_operations at32_wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .unlocked_ioctl = at32_wdt_ioctl,
-+ .open = at32_wdt_open,
-+ .release = at32_wdt_close,
-+ .write = at32_wdt_write,
-+};
-+
-+static int __init at32_wdt_enable_source_clock(struct platform_device *pdev)
-+{
-+ struct clk *clk;
-+ unsigned int csel;
-+ u32 ctrl;
-+
-+ /* Only v3+ have selectable source clock */
-+ if (at32_wdt_version() < 3)
-+ return 0;
-+
-+ csel = 1;
-+
-+ /*
-+ * Prefer the much more accurate crystal oscillator in favor
-+ * of the RC oscillator.
-+ */
-+ clk = clk_get(NULL, "osc32");
-+ if (IS_ERR(clk)) {
-+ csel = 0;
-+ clk = clk_get(NULL, "rcosc");
-+ }
-+ if (IS_ERR(clk)) {
-+ dev_dbg(&pdev->dev, "No source clock\n");
-+ return -ENXIO;
-+ }
-+
-+ clk_enable(clk);
-+
-+ dev_info(&pdev->dev, "Using 32 kHz %s oscillator\n",
-+ csel ? "crystal" : "RC");
-+
-+ wdt_clk_enable(wdt);
-+ ctrl = (csel << WDT_CTRL_CSEL) | (1 << WDT_CTRL_CEN);
-+
-+ /*
-+ * Make sure the WDT is disabled, and disable any clocks that
-+ * may have been selected earlier.
-+ */
-+ wdt_writel(wdt, CTRL, 0x55 << WDT_CTRL_KEY);
-+ wdt_writel(wdt, CTRL, 0xaa << WDT_CTRL_KEY);
-+
-+ /* Wait for the clock to become properly deselected */
-+ while (wdt_readl(wdt, CTRL) & (1 << WDT_CTRL_CEN))
-+ cpu_relax();
-+
-+ /* Select the new clock */
-+ wdt_writel(wdt, CTRL, ctrl | (0x55 << WDT_CTRL_KEY));
-+ wdt_writel(wdt, CTRL, ctrl | (0xaa << WDT_CTRL_KEY));
-+
-+ /* Wait for the new clock to become usable */
-+ while (!(wdt_readl(wdt, CTRL) & (1 << WDT_CTRL_CEN)))
-+ cpu_relax();
-+
-+ wdt_clk_disable(wdt);
-+ return 0;
-+}
-+
-+static void at32_wdt_disable_source_clock(void)
-+{
-+ wdt_clk_enable(wdt);
-+
-+ wdt_writel(wdt, CTRL, 0x55 << WDT_CTRL_KEY);
-+ wdt_writel(wdt, CTRL, 0xaa << WDT_CTRL_KEY);
-+
-+ /* Wait for the clock to become properly deselected */
-+ while (wdt_readl(wdt, CTRL) & (1 << WDT_CTRL_CEN))
-+ cpu_relax();
-+
-+ wdt_clk_disable(wdt);
-+}
-+
-+static int __init at32_wdt_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs;
-+ int ret;
-+
-+ if (wdt) {
-+ dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n");
-+ return -EBUSY;
-+ }
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_dbg(&pdev->dev, "missing mmio resource\n");
-+ return -ENXIO;
-+ }
-+
-+ wdt = kzalloc(sizeof(struct wdt_at32), GFP_KERNEL);
-+ if (!wdt) {
-+ dev_dbg(&pdev->dev, "no memory for wdt structure\n");
-+ return -ENOMEM;
-+ }
-+
-+ wdt->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!wdt->regs) {
-+ ret = -ENOMEM;
-+ dev_dbg(&pdev->dev, "could not map I/O memory\n");
-+ goto err_free;
-+ }
-+
-+ if (!cpu_is_at32ap7000()) {
-+ wdt->pclk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(wdt->pclk)) {
-+ dev_dbg(&pdev->dev, "no peripheral clock\n");
-+ ret = -ENXIO;
-+ goto err_iounmap;
-+ }
-+ }
-+
-+ ret = at32_wdt_enable_source_clock(pdev);
-+ if (ret)
-+ goto err_put_clk;
-+
-+ spin_lock_init(&wdt->io_lock);
-+ wdt->boot_status = at32_wdt_get_status();
-+
-+ /* Work-around for watchdog silicon errata. */
-+ if (cpu_is_at32ap7000()
-+ && (wdt->boot_status & WDIOF_CARDRESET)) {
-+ dev_info(&pdev->dev, "CPU must be reset with external "
-+ "reset or POR due to silicon errata.\n");
-+ ret = -EIO;
-+ goto err_disable_source_clock;
-+ } else {
-+ wdt->users = 0;
-+ }
-+ wdt->miscdev.minor = WATCHDOG_MINOR;
-+ wdt->miscdev.name = "watchdog";
-+ wdt->miscdev.fops = &at32_wdt_fops;
-+
-+ if (at32_wdt_settimeout(timeout)) {
-+ at32_wdt_settimeout(TIMEOUT_DEFAULT);
-+ dev_dbg(&pdev->dev,
-+ "default timeout invalid, set to %d sec.\n",
-+ TIMEOUT_DEFAULT);
-+ }
-+
-+ ret = misc_register(&wdt->miscdev);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
-+ goto err_iounmap;
-+ }
-+
-+ platform_set_drvdata(pdev, wdt);
-+ wdt->miscdev.parent = &pdev->dev;
-+ dev_info(&pdev->dev,
-+ "AT32 WDT at 0x%p, timeout %d sec (nowayout=%d)\n",
-+ wdt->regs, wdt->timeout, nowayout);
-+
-+ return 0;
-+
-+err_disable_source_clock:
-+ at32_wdt_disable_source_clock();
-+err_put_clk:
-+ if (!cpu_is_at32ap7000())
-+ clk_put(wdt->pclk);
-+err_iounmap:
-+ iounmap(wdt->regs);
-+err_free:
-+ kfree(wdt);
-+ wdt = NULL;
-+ return ret;
-+}
-+
-+static int __exit at32_wdt_remove(struct platform_device *pdev)
-+{
-+ if (wdt && platform_get_drvdata(pdev) == wdt) {
-+ /* Stop the timer before we leave */
-+ if (!nowayout) {
-+ at32_wdt_stop();
-+ at32_wdt_disable_source_clock();
-+ }
-+
-+ misc_deregister(&wdt->miscdev);
-+ if (!cpu_is_at32ap7000())
-+ clk_put(wdt->pclk);
-+ iounmap(wdt->regs);
-+ kfree(wdt);
-+ wdt = NULL;
-+ platform_set_drvdata(pdev, NULL);
-+ }
-+ return 0;
-+}
-+
-+static void at32_wdt_shutdown(struct platform_device *pdev)
-+{
-+ at32_wdt_stop();
-+}
-+
-+#ifdef CONFIG_PM
-+static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message)
-+{
-+ at32_wdt_stop();
-+ return 0;
-+}
-+
-+static int at32_wdt_resume(struct platform_device *pdev)
-+{
-+ if (wdt->users)
-+ at32_wdt_start();
-+ return 0;
-+}
-+#else
-+#define at32_wdt_suspend NULL
-+#define at32_wdt_resume NULL
-+#endif
-+
-+/* work with hotplug and coldplug */
-+MODULE_ALIAS("platform:at32_wdt");
-+
-+static struct platform_driver at32_wdt_driver = {
-+ .remove = __exit_p(at32_wdt_remove),
-+ .suspend = at32_wdt_suspend,
-+ .resume = at32_wdt_resume,
-+ .driver = {
-+ .name = "at32_wdt",
-+ .owner = THIS_MODULE,
-+ },
-+ .shutdown = at32_wdt_shutdown,
-+};
-+
-+static int __init at32_wdt_init(void)
-+{
-+ return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe);
-+}
-+module_init(at32_wdt_init);
-+
-+static void __exit at32_wdt_exit(void)
-+{
-+ platform_driver_unregister(&at32_wdt_driver);
-+}
-+module_exit(at32_wdt_exit);
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Watchdog driver for Atmel AVR32 devices");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c
-deleted file mode 100644
-index e8ae638..0000000
---- a/drivers/watchdog/at32ap700x_wdt.c
-+++ /dev/null
-@@ -1,449 +0,0 @@
--/*
-- * Watchdog driver for Atmel AT32AP700X devices
-- *
-- * Copyright (C) 2005-2006 Atmel Corporation
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- *
-- *
-- * Errata: WDT Clear is blocked after WDT Reset
-- *
-- * A watchdog timer event will, after reset, block writes to the WDT_CLEAR
-- * register, preventing the program to clear the next Watchdog Timer Reset.
-- *
-- * If you still want to use the WDT after a WDT reset a small code can be
-- * insterted at the startup checking the AVR32_PM.rcause register for WDT reset
-- * and use a GPIO pin to reset the system. This method requires that one of the
-- * GPIO pins are available and connected externally to the RESET_N pin. After
-- * the GPIO pin has pulled down the reset line the GPIO will be reset and leave
-- * the pin tristated with pullup.
-- */
--
--#include <linux/init.h>
--#include <linux/kernel.h>
--#include <linux/module.h>
--#include <linux/moduleparam.h>
--#include <linux/miscdevice.h>
--#include <linux/fs.h>
--#include <linux/platform_device.h>
--#include <linux/watchdog.h>
--#include <linux/uaccess.h>
--#include <linux/io.h>
--#include <linux/spinlock.h>
--
--#define TIMEOUT_MIN 1
--#define TIMEOUT_MAX 2
--#define TIMEOUT_DEFAULT TIMEOUT_MAX
--
--/* module parameters */
--static int timeout = TIMEOUT_DEFAULT;
--module_param(timeout, int, 0);
--MODULE_PARM_DESC(timeout,
-- "Timeout value. Limited to be 1 or 2 seconds. (default="
-- __MODULE_STRING(TIMEOUT_DEFAULT) ")");
--
--static int nowayout = WATCHDOG_NOWAYOUT;
--module_param(nowayout, int, 0);
--MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
-- __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
--
--/* Watchdog registers and write/read macro */
--#define WDT_CTRL 0x00
--#define WDT_CTRL_EN 0
--#define WDT_CTRL_PSEL 8
--#define WDT_CTRL_KEY 24
--
--#define WDT_CLR 0x04
--
--#define WDT_RCAUSE 0x10
--#define WDT_RCAUSE_POR 0
--#define WDT_RCAUSE_EXT 2
--#define WDT_RCAUSE_WDT 3
--#define WDT_RCAUSE_JTAG 4
--#define WDT_RCAUSE_SERP 5
--
--#define WDT_BIT(name) (1 << WDT_##name)
--#define WDT_BF(name, value) ((value) << WDT_##name)
--
--#define wdt_readl(dev, reg) \
-- __raw_readl((dev)->regs + WDT_##reg)
--#define wdt_writel(dev, reg, value) \
-- __raw_writel((value), (dev)->regs + WDT_##reg)
--
--struct wdt_at32ap700x {
-- void __iomem *regs;
-- spinlock_t io_lock;
-- int timeout;
-- int boot_status;
-- unsigned long users;
-- struct miscdevice miscdev;
--};
--
--static struct wdt_at32ap700x *wdt;
--static char expect_release;
--
--/*
-- * Disable the watchdog.
-- */
--static inline void at32_wdt_stop(void)
--{
-- unsigned long psel;
--
-- spin_lock(&wdt->io_lock);
-- psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f);
-- wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55));
-- wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa));
-- spin_unlock(&wdt->io_lock);
--}
--
--/*
-- * Enable and reset the watchdog.
-- */
--static inline void at32_wdt_start(void)
--{
-- /* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
-- unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe;
--
-- spin_lock(&wdt->io_lock);
-- wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
-- | WDT_BF(CTRL_PSEL, psel)
-- | WDT_BF(CTRL_KEY, 0x55));
-- wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
-- | WDT_BF(CTRL_PSEL, psel)
-- | WDT_BF(CTRL_KEY, 0xaa));
-- spin_unlock(&wdt->io_lock);
--}
--
--/*
-- * Pat the watchdog timer.
-- */
--static inline void at32_wdt_pat(void)
--{
-- spin_lock(&wdt->io_lock);
-- wdt_writel(wdt, CLR, 0x42);
-- spin_unlock(&wdt->io_lock);
--}
--
--/*
-- * Watchdog device is opened, and watchdog starts running.
-- */
--static int at32_wdt_open(struct inode *inode, struct file *file)
--{
-- if (test_and_set_bit(1, &wdt->users))
-- return -EBUSY;
--
-- at32_wdt_start();
-- return nonseekable_open(inode, file);
--}
--
--/*
-- * Close the watchdog device.
-- */
--static int at32_wdt_close(struct inode *inode, struct file *file)
--{
-- if (expect_release == 42) {
-- at32_wdt_stop();
-- } else {
-- dev_dbg(wdt->miscdev.parent,
-- "unexpected close, not stopping watchdog!\n");
-- at32_wdt_pat();
-- }
-- clear_bit(1, &wdt->users);
-- expect_release = 0;
-- return 0;
--}
--
--/*
-- * Change the watchdog time interval.
-- */
--static int at32_wdt_settimeout(int time)
--{
-- /*
-- * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is
-- * 2 ^ 16 allowing up to 2 seconds timeout.
-- */
-- if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX))
-- return -EINVAL;
--
-- /*
-- * Set new watchdog time. It will be used when at32_wdt_start() is
-- * called.
-- */
-- wdt->timeout = time;
-- return 0;
--}
--
--/*
-- * Get the watchdog status.
-- */
--static int at32_wdt_get_status(void)
--{
-- int rcause;
-- int status = 0;
--
-- rcause = wdt_readl(wdt, RCAUSE);
--
-- switch (rcause) {
-- case WDT_BIT(RCAUSE_EXT):
-- status = WDIOF_EXTERN1;
-- break;
-- case WDT_BIT(RCAUSE_WDT):
-- status = WDIOF_CARDRESET;
-- break;
-- case WDT_BIT(RCAUSE_POR): /* fall through */
-- case WDT_BIT(RCAUSE_JTAG): /* fall through */
-- case WDT_BIT(RCAUSE_SERP): /* fall through */
-- default:
-- break;
-- }
--
-- return status;
--}
--
--static struct watchdog_info at32_wdt_info = {
-- .identity = "at32ap700x watchdog",
-- .options = WDIOF_SETTIMEOUT |
-- WDIOF_KEEPALIVEPING |
-- WDIOF_MAGICCLOSE,
--};
--
--/*
-- * Handle commands from user-space.
-- */
--static long at32_wdt_ioctl(struct file *file,
-- unsigned int cmd, unsigned long arg)
--{
-- int ret = -ENOTTY;
-- int time;
-- void __user *argp = (void __user *)arg;
-- int __user *p = argp;
--
-- switch (cmd) {
-- case WDIOC_GETSUPPORT:
-- ret = copy_to_user(argp, &at32_wdt_info,
-- sizeof(at32_wdt_info)) ? -EFAULT : 0;
-- break;
-- case WDIOC_GETSTATUS:
-- ret = put_user(0, p);
-- break;
-- case WDIOC_GETBOOTSTATUS:
-- ret = put_user(wdt->boot_status, p);
-- break;
-- case WDIOC_SETOPTIONS:
-- ret = get_user(time, p);
-- if (ret)
-- break;
-- if (time & WDIOS_DISABLECARD)
-- at32_wdt_stop();
-- if (time & WDIOS_ENABLECARD)
-- at32_wdt_start();
-- ret = 0;
-- break;
-- case WDIOC_KEEPALIVE:
-- at32_wdt_pat();
-- ret = 0;
-- break;
-- case WDIOC_SETTIMEOUT:
-- ret = get_user(time, p);
-- if (ret)
-- break;
-- ret = at32_wdt_settimeout(time);
-- if (ret)
-- break;
-- /* Enable new time value */
-- at32_wdt_start();
-- /* fall through */
-- case WDIOC_GETTIMEOUT:
-- ret = put_user(wdt->timeout, p);
-- break;
-- }
--
-- return ret;
--}
--
--static ssize_t at32_wdt_write(struct file *file, const char __user *data,
-- size_t len, loff_t *ppos)
--{
-- /* See if we got the magic character 'V' and reload the timer */
-- if (len) {
-- if (!nowayout) {
-- size_t i;
--
-- /*
-- * note: just in case someone wrote the magic
-- * character five months ago...
-- */
-- expect_release = 0;
--
-- /*
-- * scan to see whether or not we got the magic
-- * character
-- */
-- for (i = 0; i != len; i++) {
-- char c;
-- if (get_user(c, data + i))
-- return -EFAULT;
-- if (c == 'V')
-- expect_release = 42;
-- }
-- }
-- /* someone wrote to us, we should pat the watchdog */
-- at32_wdt_pat();
-- }
-- return len;
--}
--
--static const struct file_operations at32_wdt_fops = {
-- .owner = THIS_MODULE,
-- .llseek = no_llseek,
-- .unlocked_ioctl = at32_wdt_ioctl,
-- .open = at32_wdt_open,
-- .release = at32_wdt_close,
-- .write = at32_wdt_write,
--};
--
--static int __init at32_wdt_probe(struct platform_device *pdev)
--{
-- struct resource *regs;
-- int ret;
--
-- if (wdt) {
-- dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n");
-- return -EBUSY;
-- }
--
-- regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- if (!regs) {
-- dev_dbg(&pdev->dev, "missing mmio resource\n");
-- return -ENXIO;
-- }
--
-- wdt = kzalloc(sizeof(struct wdt_at32ap700x), GFP_KERNEL);
-- if (!wdt) {
-- dev_dbg(&pdev->dev, "no memory for wdt structure\n");
-- return -ENOMEM;
-- }
--
-- wdt->regs = ioremap(regs->start, regs->end - regs->start + 1);
-- if (!wdt->regs) {
-- ret = -ENOMEM;
-- dev_dbg(&pdev->dev, "could not map I/O memory\n");
-- goto err_free;
-- }
--
-- spin_lock_init(&wdt->io_lock);
-- wdt->boot_status = at32_wdt_get_status();
--
-- /* Work-around for watchdog silicon errata. */
-- if (wdt->boot_status & WDIOF_CARDRESET) {
-- dev_info(&pdev->dev, "CPU must be reset with external "
-- "reset or POR due to silicon errata.\n");
-- ret = -EIO;
-- goto err_iounmap;
-- } else {
-- wdt->users = 0;
-- }
-- wdt->miscdev.minor = WATCHDOG_MINOR;
-- wdt->miscdev.name = "watchdog";
-- wdt->miscdev.fops = &at32_wdt_fops;
--
-- if (at32_wdt_settimeout(timeout)) {
-- at32_wdt_settimeout(TIMEOUT_DEFAULT);
-- dev_dbg(&pdev->dev,
-- "default timeout invalid, set to %d sec.\n",
-- TIMEOUT_DEFAULT);
-- }
--
-- ret = misc_register(&wdt->miscdev);
-- if (ret) {
-- dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
-- goto err_iounmap;
-- }
--
-- platform_set_drvdata(pdev, wdt);
-- wdt->miscdev.parent = &pdev->dev;
-- dev_info(&pdev->dev,
-- "AT32AP700X WDT at 0x%p, timeout %d sec (nowayout=%d)\n",
-- wdt->regs, wdt->timeout, nowayout);
--
-- return 0;
--
--err_iounmap:
-- iounmap(wdt->regs);
--err_free:
-- kfree(wdt);
-- wdt = NULL;
-- return ret;
--}
--
--static int __exit at32_wdt_remove(struct platform_device *pdev)
--{
-- if (wdt && platform_get_drvdata(pdev) == wdt) {
-- /* Stop the timer before we leave */
-- if (!nowayout)
-- at32_wdt_stop();
--
-- misc_deregister(&wdt->miscdev);
-- iounmap(wdt->regs);
-- kfree(wdt);
-- wdt = NULL;
-- platform_set_drvdata(pdev, NULL);
-- }
-- return 0;
--}
--
--static void at32_wdt_shutdown(struct platform_device *pdev)
--{
-- at32_wdt_stop();
--}
--
--#ifdef CONFIG_PM
--static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message)
--{
-- at32_wdt_stop();
-- return 0;
--}
--
--static int at32_wdt_resume(struct platform_device *pdev)
--{
-- if (wdt->users)
-- at32_wdt_start();
-- return 0;
--}
--#else
--#define at32_wdt_suspend NULL
--#define at32_wdt_resume NULL
--#endif
--
--/* work with hotplug and coldplug */
--MODULE_ALIAS("platform:at32_wdt");
--
--static struct platform_driver at32_wdt_driver = {
-- .remove = __exit_p(at32_wdt_remove),
-- .suspend = at32_wdt_suspend,
-- .resume = at32_wdt_resume,
-- .driver = {
-- .name = "at32_wdt",
-- .owner = THIS_MODULE,
-- },
-- .shutdown = at32_wdt_shutdown,
--};
--
--static int __init at32_wdt_init(void)
--{
-- return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe);
--}
--module_init(at32_wdt_init);
--
--static void __exit at32_wdt_exit(void)
--{
-- platform_driver_unregister(&at32_wdt_driver);
--}
--module_exit(at32_wdt_exit);
--
--MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
--MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X");
--MODULE_LICENSE("GPL");
--MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-diff --git a/include/linux/Kbuild b/include/linux/Kbuild
-index b68ec09..e69646d 100644
---- a/include/linux/Kbuild
-+++ b/include/linux/Kbuild
-@@ -23,6 +23,7 @@ header-y += atmapi.h
- header-y += atmarp.h
- header-y += atmbr2684.h
- header-y += atmclip.h
-+header-y += atmel_mpopfb.h
- header-y += atm_eni.h
- header-y += atm_he.h
- header-y += atm_idt77105.h
-diff --git a/include/linux/atmel_mpopfb.h b/include/linux/atmel_mpopfb.h
-new file mode 100644
-index 0000000..cd12e16
---- /dev/null
-+++ b/include/linux/atmel_mpopfb.h
-@@ -0,0 +1,112 @@
-+/*
-+ * Header file for AT32 MPOP FB Driver
-+ *
-+ * Data structure and register user interface
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ATMEL_MPOPFB_H__
-+#define __ATMEL_MPOPFB_H__
-+
-+#include <linux/fb.h>
-+#include <linux/ioctl.h>
-+
-+/* Coefficients for conversion to rgb. */
-+struct atmel_mpopfb_rgbconv_coeffs {
-+ int r1, r2, r3, r4;
-+ int g1, g2, g3, g4;
-+ int b1, b2, b3, b4;
-+};
-+
-+struct atmel_mpopfb_baseimg_info {
-+ /* Position of the mpop base image
-+ in the image sent to the LCD. */
-+ unsigned xpos;
-+ unsigned ypos;
-+
-+ /* The size of the base image after scaling. */
-+ unsigned xsize;
-+ unsigned ysize;
-+
-+ /* Signal that we should flip the video. */
-+ int flip;
-+
-+};
-+
-+enum atmel_mpopfb_overlay_type {
-+ ATMEL_MPOPFB_OVERLAY1 = 0,
-+ ATMEL_MPOPFB_OVERLAY2 = 1,
-+ ATMEL_MPOPFB_CURSOR = 2
-+};
-+
-+struct atmel_mpopfb_overlay_info {
-+ /* Position of the mpop overlay image
-+ in the image sent to the LCD. */
-+ unsigned xpos;
-+ unsigned ypos;
-+ /* The size of the overlay image. */
-+ unsigned xsize;
-+ unsigned ysize;
-+ /* Signal which overlay this info is for. */
-+ enum atmel_mpopfb_overlay_type overlay;
-+ /* Signal if the overlay is enabled. */
-+ unsigned enabled;
-+};
-+
-+struct atmel_mpopfb_overlay_palette_entry {
-+ unsigned char alpha;
-+ unsigned char red;
-+ unsigned char green;
-+ unsigned char blue;
-+};
-+
-+struct atmel_mpopfb_cursor_palette_entry {
-+ unsigned char:6;
-+ unsigned char invert:1;
-+ unsigned char visible:1;
-+ unsigned char red;
-+ unsigned char green;
-+ unsigned char blue;
-+};
-+
-+struct atmel_mpopfb_overlay_palette {
-+ struct atmel_mpopfb_overlay_palette_entry entry[256];
-+};
-+
-+struct atmel_mpopfb_cursor_palette {
-+ struct atmel_mpopfb_cursor_palette_entry entry[4];
-+};
-+
-+#define ATMEL_MPOP_FBIOPUT_BASEIMG_INFO _IOW('x',0,struct atmel_mpopfb_baseimg_info)
-+#define ATMEL_MPOP_FBIOGET_BASEIMG_INFO _IOR('x',1,struct atmel_mpopfb_baseimg_info)
-+#define ATMEL_MPOP_FBIOPUT_OVERLAY_INFO _IOW('x',2,struct atmel_mpopfb_overlay_info)
-+#define ATMEL_MPOP_FBIO_CONNECT_TO_LCDC _IO( 'x',4)
-+#define ATMEL_MPOP_FBIO_DISCONNECT_FROM_LCDC _IO( 'x',5)
-+#define ATMEL_MPOP_FBIOPUT_RGBCONV_COEFFS _IOW('x',6,struct atmel_mpopfb_rgbconv_coeffs)
-+#define ATMEL_MPOP_FBIOGET_RGBCONV_COEFFS _IOR('x',7,struct atmel_mpopfb_rgbconv_coeffs)
-+#define ATMEL_MPOP_FBIOPUT_OVERLAY_PALETTE _IOW('x',8,struct atmel_mpopfb_overlay_palette)
-+#define ATMEL_MPOP_FBIOGET_OVERLAY_PALETTE _IOR('x',9,struct atmel_mpopfb_overlay_palette)
-+#define ATMEL_MPOP_FBIOPUT_CURSOR_PALETTE _IOW('x',10,struct atmel_mpopfb_cursor_palette)
-+#define ATMEL_MPOP_FBIOGET_CURSOR_PALETTE _IOR('x',11,struct atmel_mpopfb_cursor_palette)
-+
-+#define ATMEL_MPOP_RESIZE_FRAC_BITS 5
-+#define ATMEL_MPOP_SCALE_FRAC_DIV(a,b) ((((a) << ATMEL_MPOP_RESIZE_FRAC_BITS))/(b))
-+#define ATMEL_MPOP_CALC_SCALE(from_res,to_res) ATMEL_MPOP_SCALE_FRAC_DIV(from_res, to_res)
-+
-+#define ATMEL_MPOP_COEFF_FRAC_BITS 8
-+
-+#endif
-diff --git a/include/linux/atmel_pdca.h b/include/linux/atmel_pdca.h
-new file mode 100644
-index 0000000..a2ee314
---- /dev/null
-+++ b/include/linux/atmel_pdca.h
-@@ -0,0 +1,120 @@
-+/*
-+ * Driver for the Atmel PDCA Peripheral DMA Controller
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ATMEL_PDCA_H
-+#define __ATMEL_PDCA_H
-+
-+#include <linux/dmaengine.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/list.h>
-+
-+struct pdca_pdata {
-+ unsigned int nr_channels;
-+};
-+
-+struct pdca_slave {
-+ struct dma_slave slave;
-+ u8 tx_periph_id;
-+ u8 rx_periph_id;
-+};
-+
-+struct pdca_desc {
-+ /* This controller does not support hardware descriptors */
-+ struct scatterlist *sg;
-+ int sg_len;
-+ u8 reg_width;
-+ u8 periph_id;
-+
-+ struct list_head desc_node;
-+ struct dma_async_tx_descriptor txd;
-+};
-+
-+struct pdca_chan {
-+ struct list_head freelist;
-+ struct list_head queue;
-+
-+ spinlock_t lock;
-+ void __iomem *regs;
-+
-+ struct scatterlist *cur_sg;
-+ struct scatterlist *next_sg;
-+
-+ struct tasklet_struct tasklet;
-+
-+ dma_cookie_t completed;
-+ struct dma_chan chan;
-+ struct pdca_slave *pslave;
-+ unsigned int descs_allocated;
-+ bool enabled;
-+};
-+
-+struct pdca_dev {
-+ struct clk *hclk;
-+ struct clk *pclk;
-+ struct dma_device dma;
-+ void __iomem *regs;
-+
-+ struct pdca_chan chan[];
-+};
-+
-+static inline struct pdca_slave *dma_to_pdca_slave(struct dma_slave *slave)
-+{
-+ return container_of(slave, struct pdca_slave, slave);
-+}
-+
-+static inline struct pdca_desc *txd_to_pdca_desc(
-+ struct dma_async_tx_descriptor *txd)
-+{
-+ return container_of(txd, struct pdca_desc, txd);
-+}
-+
-+static inline struct pdca_chan *dma_to_pdca_chan(struct dma_chan *chan)
-+{
-+ return container_of(chan, struct pdca_chan, chan);
-+}
-+
-+static inline struct pdca_dev *dma_to_pdca_dev(struct dma_device *dma)
-+{
-+ return container_of(dma, struct pdca_dev, dma);
-+}
-+
-+/* PDCA per-channel register definitions */
-+#define PDCA_MAR 0x0000 /* Memory Address */
-+#define PDCA_PSR 0x0004 /* Peripheral Select */
-+#define PDCA_TCR 0x0008 /* Transfer Counter */
-+#define PDCA_MARR 0x000c /* Memory Address Reload */
-+#define PDCA_TCRR 0x0010 /* Transfer Counter Reload */
-+#define PDCA_CR 0x0014 /* Control */
-+# define PDCA_CR_TEN ( 1 << 0) /* Transfer Enable */
-+# define PDCA_CR_TDIS ( 1 << 1) /* Transfer Disable */
-+# define PDCA_CR_ECLR ( 1 << 8) /* Error Clear */
-+#define PDCA_MR 0x0018 /* Mode */
-+# define PDCA_SIZE_BYTE ( 0 << 0) /* 8 bits per transfer */
-+# define PDCA_SIZE_HWORD ( 1 << 0) /* 16 bits per transfer */
-+# define PDCA_SIZE_WORD ( 2 << 0) /* 32 bits per transfer */
-+#define PDCA_SR 0x001c /* Status */
-+# define PDCA_SR_TEN ( 1 << 0) /* Transfer Enabled */
-+#define PDCA_IER 0x0020 /* Interrupt Enable */
-+#define PDCA_IDR 0x0024 /* Interrupt Disable */
-+#define PDCA_IMR 0x0028 /* Interrupt Mask */
-+#define PDCA_ISR 0x002c /* Interrupt Status */
-+# define PDCA_RCZ ( 1 << 0) /* Reload Counter Zero */
-+# define PDCA_TRC ( 1 << 1) /* Transfer Complete */
-+# define PDCA_TERR ( 1 << 2) /* Transfer Error */
-+
-+/* Address space occupied by one channel */
-+#define PDCA_CHAN_SIZE 0x40
-+
-+#define pdca_readl(base, reg) \
-+ __raw_readl((base) + PDCA_##reg)
-+#define pdca_writel(base, reg, value) \
-+ __raw_writel((value), (base) + PDCA_##reg)
-+
-+#endif /* __ATMEL_PDCA_H */
-diff --git a/include/linux/spi/atmel_spi.h b/include/linux/spi/atmel_spi.h
-new file mode 100644
-index 0000000..88ae568
---- /dev/null
-+++ b/include/linux/spi/atmel_spi.h
-@@ -0,0 +1,20 @@
-+/*
-+ * Driver for Atmel AT32 and AT91 SPI Controllers
-+ *
-+ * Copyright (C) 2008 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __LINUX_SPI_ATMEL_SPI_H
-+#define __LINUX_SPI_ATMEL_SPI_H
-+
-+struct atmel_spi_pdata {
-+#ifndef CONFIG_SPI_ATMEL_HAVE_PDC
-+ struct dma_slave *rx_dma_slave;
-+ struct dma_slave *tx_dma_slave;
-+#endif
-+};
-+
-+#endif /* __LINUX_SPI_ATMEL_SPI_H */
-diff --git a/include/video/atmel_mpop.h b/include/video/atmel_mpop.h
-new file mode 100644
-index 0000000..60270b8
---- /dev/null
-+++ b/include/video/atmel_mpop.h
-@@ -0,0 +1,820 @@
-+/*
-+ * Header file for AT32 MPOP Controller
-+ *
-+ * Data structure and register user interface
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ATMEL_MPOP_H__
-+#define __ATMEL_MPOP_H__
-+
-+#include <linux/atmel_mpopfb.h>
-+
-+/* MPOP Controller info data structure */
-+struct atmel_mpopfb_info {
-+ spinlock_t lock;
-+ struct fb_info *info;
-+ void __iomem *mmio;
-+ unsigned long irq_base;
-+ void *slave_base;
-+
-+ struct platform_device *pdev;
-+ struct platform_device *lcdc_pdev;
-+ struct clk *mpop_hclk;
-+ struct clk *mpop_pclk;
-+ unsigned int running;
-+ unsigned int connected_to_lcdc;
-+ unsigned long lcdc_old_smem_start;
-+ unsigned long lcdc_old_bits_per_pixel;
-+ struct atmel_mpopfb_baseimg_info baseimg_info;
-+ struct atmel_mpopfb_overlay_info overlay_info[3];
-+ struct atmel_mpopfb_rgbconv_coeffs rgbconv_coeffs;
-+};
-+
-+/* TODO! Clean up these defines.... */
-+#define ATMEL_MPOP_B 0
-+#define ATMEL_MPOP_B1 0
-+#define ATMEL_MPOP_B1_MASK 0x00000fff
-+#define ATMEL_MPOP_B1_OFFSET 0
-+#define ATMEL_MPOP_B1_SIZE 12
-+#define ATMEL_MPOP_B2 12
-+#define ATMEL_MPOP_B2B1 0x00000024
-+#define ATMEL_MPOP_B2B1_B1 0
-+#define ATMEL_MPOP_B2B1_B1_MASK 0x00000fff
-+#define ATMEL_MPOP_B2B1_B1_OFFSET 0
-+#define ATMEL_MPOP_B2B1_B1_SIZE 12
-+#define ATMEL_MPOP_B2B1_B2 12
-+#define ATMEL_MPOP_B2B1_B2_MASK 0x00fff000
-+#define ATMEL_MPOP_B2B1_B2_OFFSET 12
-+#define ATMEL_MPOP_B2B1_B2_SIZE 12
-+#define ATMEL_MPOP_B2_MASK 0x00fff000
-+#define ATMEL_MPOP_B2_OFFSET 12
-+#define ATMEL_MPOP_B2_SIZE 12
-+#define ATMEL_MPOP_B3 0
-+#define ATMEL_MPOP_B3_MASK 0x00000fff
-+#define ATMEL_MPOP_B3_OFFSET 0
-+#define ATMEL_MPOP_B3_SIZE 12
-+#define ATMEL_MPOP_B4 12
-+#define ATMEL_MPOP_B4B3 0x00000028
-+#define ATMEL_MPOP_B4B3_B3 0
-+#define ATMEL_MPOP_B4B3_B3_MASK 0x00000fff
-+#define ATMEL_MPOP_B4B3_B3_OFFSET 0
-+#define ATMEL_MPOP_B4B3_B3_SIZE 12
-+#define ATMEL_MPOP_B4B3_B4 12
-+#define ATMEL_MPOP_B4B3_B4_MASK 0xfffff000
-+#define ATMEL_MPOP_B4B3_B4_OFFSET 12
-+#define ATMEL_MPOP_B4B3_B4_SIZE 20
-+#define ATMEL_MPOP_B4_MASK 0xfffff000
-+#define ATMEL_MPOP_B4_OFFSET 12
-+#define ATMEL_MPOP_B4_SIZE 20
-+#define ATMEL_MPOP_BGCOLOR 0x00000090
-+#define ATMEL_MPOP_BGCOLOR_BGCOLOR 0
-+#define ATMEL_MPOP_BGCOLOR_BGCOLOR_MASK 0xffffffff
-+#define ATMEL_MPOP_BGCOLOR_BGCOLOR_OFFSET 0
-+#define ATMEL_MPOP_BGCOLOR_BGCOLOR_SIZE 32
-+#define ATMEL_MPOP_BGCOLOR_MASK 0xffffffff
-+#define ATMEL_MPOP_BGCOLOR_OFFSET 0
-+#define ATMEL_MPOP_BGCOLOR_SIZE 32
-+#define ATMEL_MPOP_BGR 6
-+#define ATMEL_MPOP_BGR_MASK 0x00000040
-+#define ATMEL_MPOP_BGR_OFFSET 6
-+#define ATMEL_MPOP_BGR_SIZE 1
-+#define ATMEL_MPOP_B_MASK 0x000000ff
-+#define ATMEL_MPOP_B_OFFSET 0
-+#define ATMEL_MPOP_B_SIZE 8
-+#define ATMEL_MPOP_CACHEDIS 8
-+#define ATMEL_MPOP_CACHEDIS_MASK 0x00000100
-+#define ATMEL_MPOP_CACHEDIS_OFFSET 8
-+#define ATMEL_MPOP_CACHEDIS_SIZE 1
-+#define ATMEL_MPOP_CR 0x00000000
-+#define ATMEL_MPOP_CR_CACHEDIS 8
-+#define ATMEL_MPOP_CR_CACHEDIS_MASK 0x00000100
-+#define ATMEL_MPOP_CR_CACHEDIS_OFFSET 8
-+#define ATMEL_MPOP_CR_CACHEDIS_SIZE 1
-+#define ATMEL_MPOP_CR_EN 0
-+#define ATMEL_MPOP_CR_EN_MASK 0x00000001
-+#define ATMEL_MPOP_CR_EN_OFFSET 0
-+#define ATMEL_MPOP_CR_EN_SIZE 1
-+#define ATMEL_MPOP_CR_OUT_BGR 3
-+#define ATMEL_MPOP_CR_OUT_BGR_MASK 0x00000008
-+#define ATMEL_MPOP_CR_OUT_BGR_OFFSET 3
-+#define ATMEL_MPOP_CR_OUT_BGR_SIZE 1
-+#define ATMEL_MPOP_CR_OUT_CTRL 2
-+#define ATMEL_MPOP_CR_OUT_CTRL_MASK 0x00000004
-+#define ATMEL_MPOP_CR_OUT_CTRL_OFFSET 2
-+#define ATMEL_MPOP_CR_OUT_CTRL_SIZE 1
-+#define ATMEL_MPOP_CR_START 1
-+#define ATMEL_MPOP_CR_START_MASK 0x00000002
-+#define ATMEL_MPOP_CR_START_OFFSET 1
-+#define ATMEL_MPOP_CR_START_SIZE 1
-+#define ATMEL_MPOP_CURSOREN 0
-+#define ATMEL_MPOP_CURSOREN_MASK 0x00000001
-+#define ATMEL_MPOP_CURSOREN_OFFSET 0
-+#define ATMEL_MPOP_CURSOREN_SIZE 1
-+#define ATMEL_MPOP_CURSOR_P0 0x00000080
-+#define ATMEL_MPOP_CURSOR_P0_B 0
-+#define ATMEL_MPOP_CURSOR_P0_B_MASK 0x000000ff
-+#define ATMEL_MPOP_CURSOR_P0_B_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_P0_B_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P0_G 8
-+#define ATMEL_MPOP_CURSOR_P0_G_MASK 0x0000ff00
-+#define ATMEL_MPOP_CURSOR_P0_G_OFFSET 8
-+#define ATMEL_MPOP_CURSOR_P0_G_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P0_INVERT 25
-+#define ATMEL_MPOP_CURSOR_P0_INVERT_MASK 0x02000000
-+#define ATMEL_MPOP_CURSOR_P0_INVERT_OFFSET 25
-+#define ATMEL_MPOP_CURSOR_P0_INVERT_SIZE 1
-+#define ATMEL_MPOP_CURSOR_P0_R 16
-+#define ATMEL_MPOP_CURSOR_P0_R_MASK 0x00ff0000
-+#define ATMEL_MPOP_CURSOR_P0_R_OFFSET 16
-+#define ATMEL_MPOP_CURSOR_P0_R_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P0_VISIBLE 24
-+#define ATMEL_MPOP_CURSOR_P0_VISIBLE_MASK 0x01000000
-+#define ATMEL_MPOP_CURSOR_P0_VISIBLE_OFFSET 24
-+#define ATMEL_MPOP_CURSOR_P0_VISIBLE_SIZE 1
-+#define ATMEL_MPOP_CURSOR_P1 0x00000084
-+#define ATMEL_MPOP_CURSOR_P1_B 0
-+#define ATMEL_MPOP_CURSOR_P1_B_MASK 0x000000ff
-+#define ATMEL_MPOP_CURSOR_P1_B_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_P1_B_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P1_G 8
-+#define ATMEL_MPOP_CURSOR_P1_G_MASK 0x0000ff00
-+#define ATMEL_MPOP_CURSOR_P1_G_OFFSET 8
-+#define ATMEL_MPOP_CURSOR_P1_G_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P1_INVERT 25
-+#define ATMEL_MPOP_CURSOR_P1_INVERT_MASK 0x02000000
-+#define ATMEL_MPOP_CURSOR_P1_INVERT_OFFSET 25
-+#define ATMEL_MPOP_CURSOR_P1_INVERT_SIZE 1
-+#define ATMEL_MPOP_CURSOR_P1_R 16
-+#define ATMEL_MPOP_CURSOR_P1_R_MASK 0x00ff0000
-+#define ATMEL_MPOP_CURSOR_P1_R_OFFSET 16
-+#define ATMEL_MPOP_CURSOR_P1_R_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P1_VISIBLE 24
-+#define ATMEL_MPOP_CURSOR_P1_VISIBLE_MASK 0x01000000
-+#define ATMEL_MPOP_CURSOR_P1_VISIBLE_OFFSET 24
-+#define ATMEL_MPOP_CURSOR_P1_VISIBLE_SIZE 1
-+#define ATMEL_MPOP_CURSOR_P2 0x00000088
-+#define ATMEL_MPOP_CURSOR_P2_B 0
-+#define ATMEL_MPOP_CURSOR_P2_B_MASK 0x000000ff
-+#define ATMEL_MPOP_CURSOR_P2_B_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_P2_B_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P2_G 8
-+#define ATMEL_MPOP_CURSOR_P2_G_MASK 0x0000ff00
-+#define ATMEL_MPOP_CURSOR_P2_G_OFFSET 8
-+#define ATMEL_MPOP_CURSOR_P2_G_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P2_INVERT 25
-+#define ATMEL_MPOP_CURSOR_P2_INVERT_MASK 0x02000000
-+#define ATMEL_MPOP_CURSOR_P2_INVERT_OFFSET 25
-+#define ATMEL_MPOP_CURSOR_P2_INVERT_SIZE 1
-+#define ATMEL_MPOP_CURSOR_P2_R 16
-+#define ATMEL_MPOP_CURSOR_P2_R_MASK 0x00ff0000
-+#define ATMEL_MPOP_CURSOR_P2_R_OFFSET 16
-+#define ATMEL_MPOP_CURSOR_P2_R_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P2_VISIBLE 24
-+#define ATMEL_MPOP_CURSOR_P2_VISIBLE_MASK 0x01000000
-+#define ATMEL_MPOP_CURSOR_P2_VISIBLE_OFFSET 24
-+#define ATMEL_MPOP_CURSOR_P2_VISIBLE_SIZE 1
-+#define ATMEL_MPOP_CURSOR_P3 0x0000008c
-+#define ATMEL_MPOP_CURSOR_P3_B 0
-+#define ATMEL_MPOP_CURSOR_P3_B_MASK 0x000000ff
-+#define ATMEL_MPOP_CURSOR_P3_B_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_P3_B_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P3_G 8
-+#define ATMEL_MPOP_CURSOR_P3_G_MASK 0x0000ff00
-+#define ATMEL_MPOP_CURSOR_P3_G_OFFSET 8
-+#define ATMEL_MPOP_CURSOR_P3_G_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P3_INVERT 25
-+#define ATMEL_MPOP_CURSOR_P3_INVERT_MASK 0x02000000
-+#define ATMEL_MPOP_CURSOR_P3_INVERT_OFFSET 25
-+#define ATMEL_MPOP_CURSOR_P3_INVERT_SIZE 1
-+#define ATMEL_MPOP_CURSOR_P3_R 16
-+#define ATMEL_MPOP_CURSOR_P3_R_MASK 0x00ff0000
-+#define ATMEL_MPOP_CURSOR_P3_R_OFFSET 16
-+#define ATMEL_MPOP_CURSOR_P3_R_SIZE 8
-+#define ATMEL_MPOP_CURSOR_P3_VISIBLE 24
-+#define ATMEL_MPOP_CURSOR_P3_VISIBLE_MASK 0x01000000
-+#define ATMEL_MPOP_CURSOR_P3_VISIBLE_OFFSET 24
-+#define ATMEL_MPOP_CURSOR_P3_VISIBLE_SIZE 1
-+#define ATMEL_MPOP_CURSOR_POS 0x00000058
-+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X 11
-+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X_MASK 0x003ff800
-+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X_OFFSET 11
-+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_X_SIZE 11
-+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y 0
-+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_POS_CURSOR_POS_Y_SIZE 11
-+#define ATMEL_MPOP_CURSOR_POS_X 11
-+#define ATMEL_MPOP_CURSOR_POS_X_MASK 0x003ff800
-+#define ATMEL_MPOP_CURSOR_POS_X_OFFSET 11
-+#define ATMEL_MPOP_CURSOR_POS_X_SIZE 11
-+#define ATMEL_MPOP_CURSOR_POS_Y 0
-+#define ATMEL_MPOP_CURSOR_POS_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_CURSOR_POS_Y_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_POS_Y_SIZE 11
-+#define ATMEL_MPOP_CURSOR_SAR 0x00000048
-+#define ATMEL_MPOP_CURSOR_SAR_CURSOR_SAR 0
-+#define ATMEL_MPOP_CURSOR_SAR_CURSOR_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_CURSOR_SAR_CURSOR_SAR_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_SAR_CURSOR_SAR_SIZE 32
-+#define ATMEL_MPOP_CURSOR_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_CURSOR_SAR_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_SAR_SIZE 32
-+#define ATMEL_MPOP_CURSOR_SIZE 0x0000006c
-+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X 11
-+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X_MASK 0x003ff800
-+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X_OFFSET 11
-+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_X_SIZE 11
-+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y 0
-+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_SIZE_CURSOR_SIZE_Y_SIZE 11
-+#define ATMEL_MPOP_CURSOR_SIZE_X 11
-+#define ATMEL_MPOP_CURSOR_SIZE_X_MASK 0x003ff800
-+#define ATMEL_MPOP_CURSOR_SIZE_X_OFFSET 11
-+#define ATMEL_MPOP_CURSOR_SIZE_X_SIZE 11
-+#define ATMEL_MPOP_CURSOR_SIZE_Y 0
-+#define ATMEL_MPOP_CURSOR_SIZE_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_CURSOR_SIZE_Y_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_SIZE_Y_SIZE 11
-+#define ATMEL_MPOP_CURSOR_WTC 0x0000007c
-+#define ATMEL_MPOP_CURSOR_WTC_CURSOR_WTC 0
-+#define ATMEL_MPOP_CURSOR_WTC_CURSOR_WTC_MASK 0xffffffff
-+#define ATMEL_MPOP_CURSOR_WTC_CURSOR_WTC_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_WTC_CURSOR_WTC_SIZE 32
-+#define ATMEL_MPOP_CURSOR_WTC_MASK 0xffffffff
-+#define ATMEL_MPOP_CURSOR_WTC_OFFSET 0
-+#define ATMEL_MPOP_CURSOR_WTC_SIZE 32
-+#define ATMEL_MPOP_DISP_MAX_COORD 0x00000010
-+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_X 11
-+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_X_MASK 0x003ff800
-+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_X_OFFSET 11
-+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_X_SIZE 11
-+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_Y 0
-+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_Y_OFFSET 0
-+#define ATMEL_MPOP_DISP_MAX_COORD_DISP_MAX_COORD_Y_SIZE 11
-+#define ATMEL_MPOP_DISP_MAX_COORD_X 11
-+#define ATMEL_MPOP_DISP_MAX_COORD_X_MASK 0x003ff800
-+#define ATMEL_MPOP_DISP_MAX_COORD_X_OFFSET 11
-+#define ATMEL_MPOP_DISP_MAX_COORD_X_SIZE 11
-+#define ATMEL_MPOP_DISP_MAX_COORD_Y 0
-+#define ATMEL_MPOP_DISP_MAX_COORD_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_DISP_MAX_COORD_Y_OFFSET 0
-+#define ATMEL_MPOP_DISP_MAX_COORD_Y_SIZE 11
-+#define ATMEL_MPOP_EN 0
-+#define ATMEL_MPOP_EN_MASK 0x00000001
-+#define ATMEL_MPOP_EN_OFFSET 0
-+#define ATMEL_MPOP_EN_SIZE 1
-+#define ATMEL_MPOP_EOP 3
-+#define ATMEL_MPOP_EOP_MASK 0x00000008
-+#define ATMEL_MPOP_EOP_OFFSET 3
-+#define ATMEL_MPOP_EOP_SIZE 1
-+#define ATMEL_MPOP_G 8
-+#define ATMEL_MPOP_G1 0
-+#define ATMEL_MPOP_G1_MASK 0x00000fff
-+#define ATMEL_MPOP_G1_OFFSET 0
-+#define ATMEL_MPOP_G1_SIZE 12
-+#define ATMEL_MPOP_G2 12
-+#define ATMEL_MPOP_G2G1 0x0000001c
-+#define ATMEL_MPOP_G2G1_G1 0
-+#define ATMEL_MPOP_G2G1_G1_MASK 0x00000fff
-+#define ATMEL_MPOP_G2G1_G1_OFFSET 0
-+#define ATMEL_MPOP_G2G1_G1_SIZE 12
-+#define ATMEL_MPOP_G2G1_G2 12
-+#define ATMEL_MPOP_G2G1_G2_MASK 0x00fff000
-+#define ATMEL_MPOP_G2G1_G2_OFFSET 12
-+#define ATMEL_MPOP_G2G1_G2_SIZE 12
-+#define ATMEL_MPOP_G2_MASK 0x00fff000
-+#define ATMEL_MPOP_G2_OFFSET 12
-+#define ATMEL_MPOP_G2_SIZE 12
-+#define ATMEL_MPOP_G3 0
-+#define ATMEL_MPOP_G3_MASK 0x00000fff
-+#define ATMEL_MPOP_G3_OFFSET 0
-+#define ATMEL_MPOP_G3_SIZE 12
-+#define ATMEL_MPOP_G4 12
-+#define ATMEL_MPOP_G4G3 0x00000020
-+#define ATMEL_MPOP_G4G3_G3 0
-+#define ATMEL_MPOP_G4G3_G3_MASK 0x00000fff
-+#define ATMEL_MPOP_G4G3_G3_OFFSET 0
-+#define ATMEL_MPOP_G4G3_G3_SIZE 12
-+#define ATMEL_MPOP_G4G3_G4 12
-+#define ATMEL_MPOP_G4G3_G4_MASK 0xfffff000
-+#define ATMEL_MPOP_G4G3_G4_OFFSET 12
-+#define ATMEL_MPOP_G4G3_G4_SIZE 20
-+#define ATMEL_MPOP_G4_MASK 0xfffff000
-+#define ATMEL_MPOP_G4_OFFSET 12
-+#define ATMEL_MPOP_G4_SIZE 20
-+#define ATMEL_MPOP_G_MASK 0x0000ff00
-+#define ATMEL_MPOP_G_OFFSET 8
-+#define ATMEL_MPOP_G_SIZE 8
-+#define ATMEL_MPOP_INTCLEAR 0x000000b0
-+#define ATMEL_MPOP_INTCLEAR_EOP 3
-+#define ATMEL_MPOP_INTCLEAR_EOP_MASK 0x00000008
-+#define ATMEL_MPOP_INTCLEAR_EOP_OFFSET 3
-+#define ATMEL_MPOP_INTCLEAR_EOP_SIZE 1
-+#define ATMEL_MPOP_INTCLEAR_OUT 2
-+#define ATMEL_MPOP_INTCLEAR_OUT_MASK 0x00000004
-+#define ATMEL_MPOP_INTCLEAR_OUT_OFFSET 2
-+#define ATMEL_MPOP_INTCLEAR_OUT_SIZE 1
-+#define ATMEL_MPOP_INTCLEAR_OVERLAY 1
-+#define ATMEL_MPOP_INTCLEAR_OVERLAY_MASK 0x00000002
-+#define ATMEL_MPOP_INTCLEAR_OVERLAY_OFFSET 1
-+#define ATMEL_MPOP_INTCLEAR_OVERLAY_SIZE 1
-+#define ATMEL_MPOP_INTCLEAR_SOP 4
-+#define ATMEL_MPOP_INTCLEAR_SOP_MASK 0x00000010
-+#define ATMEL_MPOP_INTCLEAR_SOP_OFFSET 4
-+#define ATMEL_MPOP_INTCLEAR_SOP_SIZE 1
-+#define ATMEL_MPOP_INTCLEAR_YUV 0
-+#define ATMEL_MPOP_INTCLEAR_YUV_MASK 0x00000001
-+#define ATMEL_MPOP_INTCLEAR_YUV_OFFSET 0
-+#define ATMEL_MPOP_INTCLEAR_YUV_SIZE 1
-+#define ATMEL_MPOP_INTDIS 0x000000a4
-+#define ATMEL_MPOP_INTDIS_EOP 3
-+#define ATMEL_MPOP_INTDIS_EOP_MASK 0x00000008
-+#define ATMEL_MPOP_INTDIS_EOP_OFFSET 3
-+#define ATMEL_MPOP_INTDIS_EOP_SIZE 1
-+#define ATMEL_MPOP_INTDIS_OUT 2
-+#define ATMEL_MPOP_INTDIS_OUT_MASK 0x00000004
-+#define ATMEL_MPOP_INTDIS_OUT_OFFSET 2
-+#define ATMEL_MPOP_INTDIS_OUT_SIZE 1
-+#define ATMEL_MPOP_INTDIS_OVERLAY 1
-+#define ATMEL_MPOP_INTDIS_OVERLAY_MASK 0x00000002
-+#define ATMEL_MPOP_INTDIS_OVERLAY_OFFSET 1
-+#define ATMEL_MPOP_INTDIS_OVERLAY_SIZE 1
-+#define ATMEL_MPOP_INTDIS_SOP 4
-+#define ATMEL_MPOP_INTDIS_SOP_MASK 0x00000010
-+#define ATMEL_MPOP_INTDIS_SOP_OFFSET 4
-+#define ATMEL_MPOP_INTDIS_SOP_SIZE 1
-+#define ATMEL_MPOP_INTDIS_YUV 0
-+#define ATMEL_MPOP_INTDIS_YUV_MASK 0x00000001
-+#define ATMEL_MPOP_INTDIS_YUV_OFFSET 0
-+#define ATMEL_MPOP_INTDIS_YUV_SIZE 1
-+#define ATMEL_MPOP_INTEN 0x000000a0
-+#define ATMEL_MPOP_INTEN_EOP 3
-+#define ATMEL_MPOP_INTEN_EOP_MASK 0x00000008
-+#define ATMEL_MPOP_INTEN_EOP_OFFSET 3
-+#define ATMEL_MPOP_INTEN_EOP_SIZE 1
-+#define ATMEL_MPOP_INTEN_OUT 2
-+#define ATMEL_MPOP_INTEN_OUT_MASK 0x00000004
-+#define ATMEL_MPOP_INTEN_OUT_OFFSET 2
-+#define ATMEL_MPOP_INTEN_OUT_SIZE 1
-+#define ATMEL_MPOP_INTEN_OVERLAY 1
-+#define ATMEL_MPOP_INTEN_OVERLAY_MASK 0x00000002
-+#define ATMEL_MPOP_INTEN_OVERLAY_OFFSET 1
-+#define ATMEL_MPOP_INTEN_OVERLAY_SIZE 1
-+#define ATMEL_MPOP_INTEN_SOP 4
-+#define ATMEL_MPOP_INTEN_SOP_MASK 0x00000010
-+#define ATMEL_MPOP_INTEN_SOP_OFFSET 4
-+#define ATMEL_MPOP_INTEN_SOP_SIZE 1
-+#define ATMEL_MPOP_INTEN_YUV 0
-+#define ATMEL_MPOP_INTEN_YUV_MASK 0x00000001
-+#define ATMEL_MPOP_INTEN_YUV_OFFSET 0
-+#define ATMEL_MPOP_INTEN_YUV_SIZE 1
-+#define ATMEL_MPOP_INTMASK 0x000000a8
-+#define ATMEL_MPOP_INTMASK_EOP 3
-+#define ATMEL_MPOP_INTMASK_EOP_MASK 0x00000008
-+#define ATMEL_MPOP_INTMASK_EOP_OFFSET 3
-+#define ATMEL_MPOP_INTMASK_EOP_SIZE 1
-+#define ATMEL_MPOP_INTMASK_OUT 2
-+#define ATMEL_MPOP_INTMASK_OUT_MASK 0x00000004
-+#define ATMEL_MPOP_INTMASK_OUT_OFFSET 2
-+#define ATMEL_MPOP_INTMASK_OUT_SIZE 1
-+#define ATMEL_MPOP_INTMASK_OVERLAY 1
-+#define ATMEL_MPOP_INTMASK_OVERLAY_MASK 0x00000002
-+#define ATMEL_MPOP_INTMASK_OVERLAY_OFFSET 1
-+#define ATMEL_MPOP_INTMASK_OVERLAY_SIZE 1
-+#define ATMEL_MPOP_INTMASK_SOP 4
-+#define ATMEL_MPOP_INTMASK_SOP_MASK 0x00000010
-+#define ATMEL_MPOP_INTMASK_SOP_OFFSET 4
-+#define ATMEL_MPOP_INTMASK_SOP_SIZE 1
-+#define ATMEL_MPOP_INTMASK_YUV 0
-+#define ATMEL_MPOP_INTMASK_YUV_MASK 0x00000001
-+#define ATMEL_MPOP_INTMASK_YUV_OFFSET 0
-+#define ATMEL_MPOP_INTMASK_YUV_SIZE 1
-+#define ATMEL_MPOP_INTSTATUS 0x000000ac
-+#define ATMEL_MPOP_INTSTATUS_EOP 3
-+#define ATMEL_MPOP_INTSTATUS_EOP_MASK 0x00000008
-+#define ATMEL_MPOP_INTSTATUS_EOP_OFFSET 3
-+#define ATMEL_MPOP_INTSTATUS_EOP_SIZE 1
-+#define ATMEL_MPOP_INTSTATUS_OUT 2
-+#define ATMEL_MPOP_INTSTATUS_OUT_MASK 0x00000004
-+#define ATMEL_MPOP_INTSTATUS_OUT_OFFSET 2
-+#define ATMEL_MPOP_INTSTATUS_OUT_SIZE 1
-+#define ATMEL_MPOP_INTSTATUS_OVERLAY 1
-+#define ATMEL_MPOP_INTSTATUS_OVERLAY_MASK 0x00000002
-+#define ATMEL_MPOP_INTSTATUS_OVERLAY_OFFSET 1
-+#define ATMEL_MPOP_INTSTATUS_OVERLAY_SIZE 1
-+#define ATMEL_MPOP_INTSTATUS_SOP 4
-+#define ATMEL_MPOP_INTSTATUS_SOP_MASK 0x00000010
-+#define ATMEL_MPOP_INTSTATUS_SOP_OFFSET 4
-+#define ATMEL_MPOP_INTSTATUS_SOP_SIZE 1
-+#define ATMEL_MPOP_INTSTATUS_YUV 0
-+#define ATMEL_MPOP_INTSTATUS_YUV_MASK 0x00000001
-+#define ATMEL_MPOP_INTSTATUS_YUV_OFFSET 0
-+#define ATMEL_MPOP_INTSTATUS_YUV_SIZE 1
-+#define ATMEL_MPOP_INVERT 25
-+#define ATMEL_MPOP_INVERT_MASK 0x02000000
-+#define ATMEL_MPOP_INVERT_OFFSET 25
-+#define ATMEL_MPOP_INVERT_SIZE 1
-+#define ATMEL_MPOP_MSTR_PTR 0x0000000c
-+#define ATMEL_MPOP_MSTR_PTR_MASK 0xffffffff
-+#define ATMEL_MPOP_MSTR_PTR_MSTR_PTR 0
-+#define ATMEL_MPOP_MSTR_PTR_MSTR_PTR_MASK 0xffffffff
-+#define ATMEL_MPOP_MSTR_PTR_MSTR_PTR_OFFSET 0
-+#define ATMEL_MPOP_MSTR_PTR_MSTR_PTR_SIZE 32
-+#define ATMEL_MPOP_MSTR_PTR_OFFSET 0
-+#define ATMEL_MPOP_MSTR_PTR_SIZE 32
-+#define ATMEL_MPOP_O1EN 1
-+#define ATMEL_MPOP_O1EN_MASK 0x00000002
-+#define ATMEL_MPOP_O1EN_OFFSET 1
-+#define ATMEL_MPOP_O1EN_SIZE 1
-+#define ATMEL_MPOP_O1_POS 0x00000050
-+#define ATMEL_MPOP_O1_POS_O1_POS_X 11
-+#define ATMEL_MPOP_O1_POS_O1_POS_X_MASK 0x003ff800
-+#define ATMEL_MPOP_O1_POS_O1_POS_X_OFFSET 11
-+#define ATMEL_MPOP_O1_POS_O1_POS_X_SIZE 11
-+#define ATMEL_MPOP_O1_POS_O1_POS_Y 0
-+#define ATMEL_MPOP_O1_POS_O1_POS_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_O1_POS_O1_POS_Y_OFFSET 0
-+#define ATMEL_MPOP_O1_POS_O1_POS_Y_SIZE 11
-+#define ATMEL_MPOP_O1_POS_X 11
-+#define ATMEL_MPOP_O1_POS_X_MASK 0x003ff800
-+#define ATMEL_MPOP_O1_POS_X_OFFSET 11
-+#define ATMEL_MPOP_O1_POS_X_SIZE 11
-+#define ATMEL_MPOP_O1_POS_Y 0
-+#define ATMEL_MPOP_O1_POS_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_O1_POS_Y_OFFSET 0
-+#define ATMEL_MPOP_O1_POS_Y_SIZE 11
-+#define ATMEL_MPOP_O1_SAR 0x00000040
-+#define ATMEL_MPOP_O1_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_O1_SAR_O1_SAR 0
-+#define ATMEL_MPOP_O1_SAR_O1_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_O1_SAR_O1_SAR_OFFSET 0
-+#define ATMEL_MPOP_O1_SAR_O1_SAR_SIZE 32
-+#define ATMEL_MPOP_O1_SAR_OFFSET 0
-+#define ATMEL_MPOP_O1_SAR_SIZE 32
-+#define ATMEL_MPOP_O1_SIZE 0x00000064
-+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_X 11
-+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_X_MASK 0x003ff800
-+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_X_OFFSET 11
-+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_X_SIZE 11
-+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_Y 0
-+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_Y_OFFSET 0
-+#define ATMEL_MPOP_O1_SIZE_O1_SIZE_Y_SIZE 11
-+#define ATMEL_MPOP_O1_SIZE_X 11
-+#define ATMEL_MPOP_O1_SIZE_X_MASK 0x003ff800
-+#define ATMEL_MPOP_O1_SIZE_X_OFFSET 11
-+#define ATMEL_MPOP_O1_SIZE_X_SIZE 11
-+#define ATMEL_MPOP_O1_SIZE_Y 0
-+#define ATMEL_MPOP_O1_SIZE_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_O1_SIZE_Y_OFFSET 0
-+#define ATMEL_MPOP_O1_SIZE_Y_SIZE 11
-+#define ATMEL_MPOP_O1_WTC 0x00000074
-+#define ATMEL_MPOP_O1_WTC_MASK 0xffffffff
-+#define ATMEL_MPOP_O1_WTC_O1_WTC 0
-+#define ATMEL_MPOP_O1_WTC_O1_WTC_MASK 0xffffffff
-+#define ATMEL_MPOP_O1_WTC_O1_WTC_OFFSET 0
-+#define ATMEL_MPOP_O1_WTC_O1_WTC_SIZE 32
-+#define ATMEL_MPOP_O1_WTC_OFFSET 0
-+#define ATMEL_MPOP_O1_WTC_SIZE 32
-+#define ATMEL_MPOP_O2EN 2
-+#define ATMEL_MPOP_O2EN_MASK 0x00000004
-+#define ATMEL_MPOP_O2EN_OFFSET 2
-+#define ATMEL_MPOP_O2EN_SIZE 1
-+#define ATMEL_MPOP_O2_POS 0x00000054
-+#define ATMEL_MPOP_O2_POS_O2_POS_X 11
-+#define ATMEL_MPOP_O2_POS_O2_POS_X_MASK 0x003ff800
-+#define ATMEL_MPOP_O2_POS_O2_POS_X_OFFSET 11
-+#define ATMEL_MPOP_O2_POS_O2_POS_X_SIZE 11
-+#define ATMEL_MPOP_O2_POS_O2_POS_Y 0
-+#define ATMEL_MPOP_O2_POS_O2_POS_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_O2_POS_O2_POS_Y_OFFSET 0
-+#define ATMEL_MPOP_O2_POS_O2_POS_Y_SIZE 11
-+#define ATMEL_MPOP_O2_POS_X 11
-+#define ATMEL_MPOP_O2_POS_X_MASK 0x003ff800
-+#define ATMEL_MPOP_O2_POS_X_OFFSET 11
-+#define ATMEL_MPOP_O2_POS_X_SIZE 11
-+#define ATMEL_MPOP_O2_POS_Y 0
-+#define ATMEL_MPOP_O2_POS_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_O2_POS_Y_OFFSET 0
-+#define ATMEL_MPOP_O2_POS_Y_SIZE 11
-+#define ATMEL_MPOP_O2_SAR 0x00000044
-+#define ATMEL_MPOP_O2_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_O2_SAR_O2_SAR 0
-+#define ATMEL_MPOP_O2_SAR_O2_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_O2_SAR_O2_SAR_OFFSET 0
-+#define ATMEL_MPOP_O2_SAR_O2_SAR_SIZE 32
-+#define ATMEL_MPOP_O2_SAR_OFFSET 0
-+#define ATMEL_MPOP_O2_SAR_SIZE 32
-+#define ATMEL_MPOP_O2_SIZE 0x00000068
-+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_X 11
-+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_X_MASK 0x003ff800
-+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_X_OFFSET 11
-+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_X_SIZE 11
-+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_Y 0
-+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_Y_OFFSET 0
-+#define ATMEL_MPOP_O2_SIZE_O2_SIZE_Y_SIZE 11
-+#define ATMEL_MPOP_O2_SIZE_X 11
-+#define ATMEL_MPOP_O2_SIZE_X_MASK 0x003ff800
-+#define ATMEL_MPOP_O2_SIZE_X_OFFSET 11
-+#define ATMEL_MPOP_O2_SIZE_X_SIZE 11
-+#define ATMEL_MPOP_O2_SIZE_Y 0
-+#define ATMEL_MPOP_O2_SIZE_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_O2_SIZE_Y_OFFSET 0
-+#define ATMEL_MPOP_O2_SIZE_Y_SIZE 11
-+#define ATMEL_MPOP_O2_WTC 0x00000078
-+#define ATMEL_MPOP_O2_WTC_MASK 0xffffffff
-+#define ATMEL_MPOP_O2_WTC_O2_WTC 0
-+#define ATMEL_MPOP_O2_WTC_O2_WTC_MASK 0xffffffff
-+#define ATMEL_MPOP_O2_WTC_O2_WTC_OFFSET 0
-+#define ATMEL_MPOP_O2_WTC_O2_WTC_SIZE 32
-+#define ATMEL_MPOP_O2_WTC_OFFSET 0
-+#define ATMEL_MPOP_O2_WTC_SIZE 32
-+#define ATMEL_MPOP_OCR 0x00000008
-+#define ATMEL_MPOP_OCR_BGR 6
-+#define ATMEL_MPOP_OCR_BGR_MASK 0x00000040
-+#define ATMEL_MPOP_OCR_BGR_OFFSET 6
-+#define ATMEL_MPOP_OCR_BGR_SIZE 1
-+#define ATMEL_MPOP_OCR_CURSOREN 0
-+#define ATMEL_MPOP_OCR_CURSOREN_MASK 0x00000001
-+#define ATMEL_MPOP_OCR_CURSOREN_OFFSET 0
-+#define ATMEL_MPOP_OCR_CURSOREN_SIZE 1
-+#define ATMEL_MPOP_OCR_O1EN 1
-+#define ATMEL_MPOP_OCR_O1EN_MASK 0x00000002
-+#define ATMEL_MPOP_OCR_O1EN_OFFSET 1
-+#define ATMEL_MPOP_OCR_O1EN_SIZE 1
-+#define ATMEL_MPOP_OCR_O2EN 2
-+#define ATMEL_MPOP_OCR_O2EN_MASK 0x00000004
-+#define ATMEL_MPOP_OCR_O2EN_OFFSET 2
-+#define ATMEL_MPOP_OCR_O2EN_SIZE 1
-+#define ATMEL_MPOP_OCR_RGBEN 3
-+#define ATMEL_MPOP_OCR_RGBEN_MASK 0x00000008
-+#define ATMEL_MPOP_OCR_RGBEN_OFFSET 3
-+#define ATMEL_MPOP_OCR_RGBEN_SIZE 1
-+#define ATMEL_MPOP_OCR_RGBFORM 5
-+#define ATMEL_MPOP_OCR_RGBFORM_MASK 0x00000020
-+#define ATMEL_MPOP_OCR_RGBFORM_OFFSET 5
-+#define ATMEL_MPOP_OCR_RGBFORM_SIZE 1
-+#define ATMEL_MPOP_OCR_RGBSRC 4
-+#define ATMEL_MPOP_OCR_RGBSRC_MASK 0x00000010
-+#define ATMEL_MPOP_OCR_RGBSRC_OFFSET 4
-+#define ATMEL_MPOP_OCR_RGBSRC_SIZE 1
-+#define ATMEL_MPOP_OUT 2
-+#define ATMEL_MPOP_OUT_BEAR 0x0000009c
-+#define ATMEL_MPOP_OUT_BEAR_MASK 0xffffffff
-+#define ATMEL_MPOP_OUT_BEAR_OFFSET 0
-+#define ATMEL_MPOP_OUT_BEAR_OUT_BEAR 0
-+#define ATMEL_MPOP_OUT_BEAR_OUT_BEAR_MASK 0xffffffff
-+#define ATMEL_MPOP_OUT_BEAR_OUT_BEAR_OFFSET 0
-+#define ATMEL_MPOP_OUT_BEAR_OUT_BEAR_SIZE 32
-+#define ATMEL_MPOP_OUT_BEAR_SIZE 32
-+#define ATMEL_MPOP_OUT_BGR 3
-+#define ATMEL_MPOP_OUT_BGR_MASK 0x00000008
-+#define ATMEL_MPOP_OUT_BGR_OFFSET 3
-+#define ATMEL_MPOP_OUT_BGR_SIZE 1
-+#define ATMEL_MPOP_OUT_CTRL 2
-+#define ATMEL_MPOP_OUT_CTRL_MASK 0x00000004
-+#define ATMEL_MPOP_OUT_CTRL_OFFSET 2
-+#define ATMEL_MPOP_OUT_CTRL_SIZE 1
-+#define ATMEL_MPOP_OUT_MASK 0x00000004
-+#define ATMEL_MPOP_OUT_OFFSET 2
-+#define ATMEL_MPOP_OUT_SIZE 1
-+#define ATMEL_MPOP_OVERLAY 1
-+#define ATMEL_MPOP_OVERLAY_BEAR 0x00000098
-+#define ATMEL_MPOP_OVERLAY_BEAR_MASK 0xffffffff
-+#define ATMEL_MPOP_OVERLAY_BEAR_OFFSET 0
-+#define ATMEL_MPOP_OVERLAY_BEAR_OVERLAY_BEAR 0
-+#define ATMEL_MPOP_OVERLAY_BEAR_OVERLAY_BEAR_MASK 0xffffffff
-+#define ATMEL_MPOP_OVERLAY_BEAR_OVERLAY_BEAR_OFFSET 0
-+#define ATMEL_MPOP_OVERLAY_BEAR_OVERLAY_BEAR_SIZE 32
-+#define ATMEL_MPOP_OVERLAY_BEAR_SIZE 32
-+#define ATMEL_MPOP_OVERLAY_MASK 0x00000002
-+#define ATMEL_MPOP_OVERLAY_OFFSET 1
-+#define ATMEL_MPOP_OVERLAY_SIZE 1
-+#define ATMEL_MPOP_PALETTEDATA 0x00000400
-+#define ATMEL_MPOP_R 16
-+#define ATMEL_MPOP_R1 0
-+#define ATMEL_MPOP_R1_MASK 0x00000fff
-+#define ATMEL_MPOP_R1_OFFSET 0
-+#define ATMEL_MPOP_R1_SIZE 12
-+#define ATMEL_MPOP_R2 12
-+#define ATMEL_MPOP_R2R1 0x00000014
-+#define ATMEL_MPOP_R2R1_R1 0
-+#define ATMEL_MPOP_R2R1_R1_MASK 0x00000fff
-+#define ATMEL_MPOP_R2R1_R1_OFFSET 0
-+#define ATMEL_MPOP_R2R1_R1_SIZE 12
-+#define ATMEL_MPOP_R2R1_R2 12
-+#define ATMEL_MPOP_R2R1_R2_MASK 0x00fff000
-+#define ATMEL_MPOP_R2R1_R2_OFFSET 12
-+#define ATMEL_MPOP_R2R1_R2_SIZE 12
-+#define ATMEL_MPOP_R2_MASK 0x00fff000
-+#define ATMEL_MPOP_R2_OFFSET 12
-+#define ATMEL_MPOP_R2_SIZE 12
-+#define ATMEL_MPOP_R3 0
-+#define ATMEL_MPOP_R3_MASK 0x00000fff
-+#define ATMEL_MPOP_R3_OFFSET 0
-+#define ATMEL_MPOP_R3_SIZE 12
-+#define ATMEL_MPOP_R4 12
-+#define ATMEL_MPOP_R4R3 0x00000018
-+#define ATMEL_MPOP_R4R3_R3 0
-+#define ATMEL_MPOP_R4R3_R3_MASK 0x00000fff
-+#define ATMEL_MPOP_R4R3_R3_OFFSET 0
-+#define ATMEL_MPOP_R4R3_R3_SIZE 12
-+#define ATMEL_MPOP_R4R3_R4 12
-+#define ATMEL_MPOP_R4R3_R4_MASK 0xfffff000
-+#define ATMEL_MPOP_R4R3_R4_OFFSET 12
-+#define ATMEL_MPOP_R4R3_R4_SIZE 20
-+#define ATMEL_MPOP_R4_MASK 0xfffff000
-+#define ATMEL_MPOP_R4_OFFSET 12
-+#define ATMEL_MPOP_R4_SIZE 20
-+#define ATMEL_MPOP_RGBEN 3
-+#define ATMEL_MPOP_RGBEN_MASK 0x00000008
-+#define ATMEL_MPOP_RGBEN_OFFSET 3
-+#define ATMEL_MPOP_RGBEN_SIZE 1
-+#define ATMEL_MPOP_RGBFORM 5
-+#define ATMEL_MPOP_RGBFORM_MASK 0x00000020
-+#define ATMEL_MPOP_RGBFORM_OFFSET 5
-+#define ATMEL_MPOP_RGBFORM_SIZE 1
-+#define ATMEL_MPOP_RGBSRC 4
-+#define ATMEL_MPOP_RGBSRC_MASK 0x00000010
-+#define ATMEL_MPOP_RGBSRC_OFFSET 4
-+#define ATMEL_MPOP_RGBSRC_SIZE 1
-+#define ATMEL_MPOP_RGB_POS 0x0000004c
-+#define ATMEL_MPOP_RGB_POS_RGB_POS_X 11
-+#define ATMEL_MPOP_RGB_POS_RGB_POS_X_MASK 0x003ff800
-+#define ATMEL_MPOP_RGB_POS_RGB_POS_X_OFFSET 11
-+#define ATMEL_MPOP_RGB_POS_RGB_POS_X_SIZE 11
-+#define ATMEL_MPOP_RGB_POS_RGB_POS_Y 0
-+#define ATMEL_MPOP_RGB_POS_RGB_POS_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_RGB_POS_RGB_POS_Y_OFFSET 0
-+#define ATMEL_MPOP_RGB_POS_RGB_POS_Y_SIZE 11
-+#define ATMEL_MPOP_RGB_POS_X 11
-+#define ATMEL_MPOP_RGB_POS_X_MASK 0x003ff800
-+#define ATMEL_MPOP_RGB_POS_X_OFFSET 11
-+#define ATMEL_MPOP_RGB_POS_X_SIZE 11
-+#define ATMEL_MPOP_RGB_POS_Y 0
-+#define ATMEL_MPOP_RGB_POS_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_RGB_POS_Y_OFFSET 0
-+#define ATMEL_MPOP_RGB_POS_Y_SIZE 11
-+#define ATMEL_MPOP_RGB_SAR 0x0000003c
-+#define ATMEL_MPOP_RGB_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_RGB_SAR_OFFSET 0
-+#define ATMEL_MPOP_RGB_SAR_RGB_SAR 0
-+#define ATMEL_MPOP_RGB_SAR_RGB_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_RGB_SAR_RGB_SAR_OFFSET 0
-+#define ATMEL_MPOP_RGB_SAR_RGB_SAR_SIZE 32
-+#define ATMEL_MPOP_RGB_SAR_SIZE 32
-+#define ATMEL_MPOP_RGB_SIZE 0x00000060
-+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_X 11
-+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_X_MASK 0x003ff800
-+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_X_OFFSET 11
-+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_X_SIZE 11
-+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_Y 0
-+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_Y_OFFSET 0
-+#define ATMEL_MPOP_RGB_SIZE_RGB_SIZE_Y_SIZE 11
-+#define ATMEL_MPOP_RGB_SIZE_X 11
-+#define ATMEL_MPOP_RGB_SIZE_X_MASK 0x003ff800
-+#define ATMEL_MPOP_RGB_SIZE_X_OFFSET 11
-+#define ATMEL_MPOP_RGB_SIZE_X_SIZE 11
-+#define ATMEL_MPOP_RGB_SIZE_Y 0
-+#define ATMEL_MPOP_RGB_SIZE_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_RGB_SIZE_Y_OFFSET 0
-+#define ATMEL_MPOP_RGB_SIZE_Y_SIZE 11
-+#define ATMEL_MPOP_RGB_WTC 0x00000070
-+#define ATMEL_MPOP_RGB_WTC_MASK 0xffffffff
-+#define ATMEL_MPOP_RGB_WTC_OFFSET 0
-+#define ATMEL_MPOP_RGB_WTC_RGB_WTC 0
-+#define ATMEL_MPOP_RGB_WTC_RGB_WTC_MASK 0xffffffff
-+#define ATMEL_MPOP_RGB_WTC_RGB_WTC_OFFSET 0
-+#define ATMEL_MPOP_RGB_WTC_RGB_WTC_SIZE 32
-+#define ATMEL_MPOP_RGB_WTC_SIZE 32
-+#define ATMEL_MPOP_R_MASK 0x00ff0000
-+#define ATMEL_MPOP_R_OFFSET 16
-+#define ATMEL_MPOP_R_SIZE 8
-+#define ATMEL_MPOP_SOP 4
-+#define ATMEL_MPOP_SOP_MASK 0x00000010
-+#define ATMEL_MPOP_SOP_OFFSET 4
-+#define ATMEL_MPOP_SOP_SIZE 1
-+#define ATMEL_MPOP_START 1
-+#define ATMEL_MPOP_START_MASK 0x00000002
-+#define ATMEL_MPOP_START_OFFSET 1
-+#define ATMEL_MPOP_START_SIZE 1
-+#define ATMEL_MPOP_STRIDE 0x0000002c
-+#define ATMEL_MPOP_STRIDE_MASK 0xffffffff
-+#define ATMEL_MPOP_STRIDE_OFFSET 0
-+#define ATMEL_MPOP_STRIDE_SIZE 32
-+#define ATMEL_MPOP_STRIDE_STRIDE 0
-+#define ATMEL_MPOP_STRIDE_STRIDE_MASK 0xffffffff
-+#define ATMEL_MPOP_STRIDE_STRIDE_OFFSET 0
-+#define ATMEL_MPOP_STRIDE_STRIDE_SIZE 32
-+#define ATMEL_MPOP_U_SAR 0x00000034
-+#define ATMEL_MPOP_U_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_U_SAR_OFFSET 0
-+#define ATMEL_MPOP_U_SAR_SIZE 32
-+#define ATMEL_MPOP_U_SAR_U_SAR 0
-+#define ATMEL_MPOP_U_SAR_U_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_U_SAR_U_SAR_OFFSET 0
-+#define ATMEL_MPOP_U_SAR_U_SAR_SIZE 32
-+#define ATMEL_MPOP_VISIBLE 24
-+#define ATMEL_MPOP_VISIBLE_MASK 0x01000000
-+#define ATMEL_MPOP_VISIBLE_OFFSET 24
-+#define ATMEL_MPOP_VISIBLE_SIZE 1
-+#define ATMEL_MPOP_V_SAR 0x00000038
-+#define ATMEL_MPOP_V_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_V_SAR_OFFSET 0
-+#define ATMEL_MPOP_V_SAR_SIZE 32
-+#define ATMEL_MPOP_V_SAR_V_SAR 0
-+#define ATMEL_MPOP_V_SAR_V_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_V_SAR_V_SAR_OFFSET 0
-+#define ATMEL_MPOP_V_SAR_V_SAR_SIZE 32
-+#define ATMEL_MPOP_XRESIZE 16
-+#define ATMEL_MPOP_XRESIZE_MASK 0x00ff0000
-+#define ATMEL_MPOP_XRESIZE_OFFSET 16
-+#define ATMEL_MPOP_XRESIZE_SIZE 8
-+#define ATMEL_MPOP_YCR 0x00000004
-+#define ATMEL_MPOP_YCR_XRESIZE 16
-+#define ATMEL_MPOP_YCR_XRESIZE_MASK 0x00ff0000
-+#define ATMEL_MPOP_YCR_XRESIZE_OFFSET 16
-+#define ATMEL_MPOP_YCR_XRESIZE_SIZE 8
-+#define ATMEL_MPOP_YCR_YRESIZE 8
-+#define ATMEL_MPOP_YCR_YRESIZE_MASK 0x0000ff00
-+#define ATMEL_MPOP_YCR_YRESIZE_OFFSET 8
-+#define ATMEL_MPOP_YCR_YRESIZE_SIZE 8
-+#define ATMEL_MPOP_YCR_YUVFORMAT 0
-+#define ATMEL_MPOP_YCR_YUVFORMAT_MASK 0x00000003
-+#define ATMEL_MPOP_YCR_YUVFORMAT_OFFSET 0
-+#define ATMEL_MPOP_YCR_YUVFORMAT_SIZE 2
-+#define ATMEL_MPOP_YCR_YUVFORMAT_YUVFORMAT_420 0x00000002
-+#define ATMEL_MPOP_YCR_YUVFORMAT_YUVFORMAT_422 0x00000001
-+#define ATMEL_MPOP_YCR_YUVFORMAT_YUVFORMAT_444 0x00000000
-+#define ATMEL_MPOP_YRESIZE 8
-+#define ATMEL_MPOP_YRESIZE_MASK 0x0000ff00
-+#define ATMEL_MPOP_YRESIZE_OFFSET 8
-+#define ATMEL_MPOP_YRESIZE_SIZE 8
-+#define ATMEL_MPOP_YUV 0
-+#define ATMEL_MPOP_YUVFORMAT 0
-+#define ATMEL_MPOP_YUVFORMAT_420 0x00000002
-+#define ATMEL_MPOP_YUVFORMAT_422 0x00000001
-+#define ATMEL_MPOP_YUVFORMAT_444 0x00000000
-+#define ATMEL_MPOP_YUVFORMAT_MASK 0x00000003
-+#define ATMEL_MPOP_YUVFORMAT_OFFSET 0
-+#define ATMEL_MPOP_YUVFORMAT_SIZE 2
-+#define ATMEL_MPOP_YUVFORMAT_YUVFORMAT_420 0x00000002
-+#define ATMEL_MPOP_YUVFORMAT_YUVFORMAT_422 0x00000001
-+#define ATMEL_MPOP_YUVFORMAT_YUVFORMAT_444 0x00000000
-+#define ATMEL_MPOP_YUV_BEAR 0x00000094
-+#define ATMEL_MPOP_YUV_BEAR_MASK 0xffffffff
-+#define ATMEL_MPOP_YUV_BEAR_OFFSET 0
-+#define ATMEL_MPOP_YUV_BEAR_SIZE 32
-+#define ATMEL_MPOP_YUV_BEAR_YUV_BEAR 0
-+#define ATMEL_MPOP_YUV_BEAR_YUV_BEAR_MASK 0xffffffff
-+#define ATMEL_MPOP_YUV_BEAR_YUV_BEAR_OFFSET 0
-+#define ATMEL_MPOP_YUV_BEAR_YUV_BEAR_SIZE 32
-+#define ATMEL_MPOP_YUV_MASK 0x00000001
-+#define ATMEL_MPOP_YUV_MAX_COORD 0x0000005c
-+#define ATMEL_MPOP_YUV_MAX_COORD_X 11
-+#define ATMEL_MPOP_YUV_MAX_COORD_X_MASK 0x003ff800
-+#define ATMEL_MPOP_YUV_MAX_COORD_X_OFFSET 11
-+#define ATMEL_MPOP_YUV_MAX_COORD_X_SIZE 11
-+#define ATMEL_MPOP_YUV_MAX_COORD_Y 0
-+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_X 11
-+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_X_MASK 0x003ff800
-+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_X_OFFSET 11
-+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_X_SIZE 11
-+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_Y 0
-+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_Y_OFFSET 0
-+#define ATMEL_MPOP_YUV_MAX_COORD_YUV_MAX_COORD_Y_SIZE 11
-+#define ATMEL_MPOP_YUV_MAX_COORD_Y_MASK 0x000007ff
-+#define ATMEL_MPOP_YUV_MAX_COORD_Y_OFFSET 0
-+#define ATMEL_MPOP_YUV_MAX_COORD_Y_SIZE 11
-+#define ATMEL_MPOP_YUV_OFFSET 0
-+#define ATMEL_MPOP_YUV_SIZE 1
-+#define ATMEL_MPOP_Y_SAR 0x00000030
-+#define ATMEL_MPOP_Y_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_Y_SAR_OFFSET 0
-+#define ATMEL_MPOP_Y_SAR_SIZE 32
-+#define ATMEL_MPOP_Y_SAR_Y_SAR 0
-+#define ATMEL_MPOP_Y_SAR_Y_SAR_MASK 0xffffffff
-+#define ATMEL_MPOP_Y_SAR_Y_SAR_OFFSET 0
-+#define ATMEL_MPOP_Y_SAR_Y_SAR_SIZE 32
-+
-+#endif /* __ATMEL_MPOP_H__ */
-diff --git a/localversion-atmel b/localversion-atmel
-new file mode 100644
-index 0000000..b90deba
---- /dev/null
-+++ b/localversion-atmel
-@@ -0,0 +1 @@
-+.atmel.1
diff --git a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-200-avr32-remove.note.gnu.build-id-section.patch b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-200-avr32-remove.note.gnu.build-id-section.patch
deleted file mode 100644
index 6921de227..000000000
--- a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-200-avr32-remove.note.gnu.build-id-section.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 474d77e07d5adfe7976b6f3ed131660867489778 Mon Sep 17 00:00:00 2001
-From: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-Date: Wed, 26 Nov 2008 11:38:35 +0100
-Subject: [PATCH 1/3] avr32: remove .note.gnu.build-id section when making vmlinux.bin
-
-This patch will remove the section .note.gnu.build-id added in binutils
-2.18 from the vmlinux.bin binary. Not removing this section results in a
-huge multiple gigabyte binary and likewize large uImage.
-
-Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-
-diff --git a/arch/avr32/boot/images/Makefile b/arch/avr32/boot/images/Makefile
-index 219720a..1848bf0 100644
---- a/arch/avr32/boot/images/Makefile
-+++ b/arch/avr32/boot/images/Makefile
-@@ -10,7 +10,7 @@ MKIMAGE := $(srctree)/scripts/mkuboot.sh
-
- extra-y := vmlinux.bin vmlinux.gz
-
--OBJCOPYFLAGS_vmlinux.bin := -O binary
-+OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note.gnu.build-id
- $(obj)/vmlinux.bin: vmlinux FORCE
- $(call if_changed,objcopy)
-
---
-1.5.6.3
-
diff --git a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-201-avr32-atmel_mpopfb-disable-debug.patch b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-201-avr32-atmel_mpopfb-disable-debug.patch
deleted file mode 100644
index 6cc4b679a..000000000
--- a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-201-avr32-atmel_mpopfb-disable-debug.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From f26e2224d46430ac4f6c0ddeb518f5766ba62b16 Mon Sep 17 00:00:00 2001
-From: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-Date: Wed, 26 Nov 2008 14:10:45 +0100
-Subject: [PATCH 2/3] atmel_mpopfb: remove define DEBUG to disable debug output
-
-Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-
-diff --git a/drivers/video/atmel_mpopfb.c b/drivers/video/atmel_mpopfb.c
-index 0a07f7b..3b4b668 100644
---- a/drivers/video/atmel_mpopfb.c
-+++ b/drivers/video/atmel_mpopfb.c
-@@ -8,8 +8,6 @@
- * more details.
- */
-
--#define DEBUG
--
- #include <linux/clk.h>
- #include <linux/delay.h>
- #include <linux/dma-mapping.h>
---
-1.5.6.3
-
diff --git a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-202-avr32-atmel_mpopfb-add-signal-to-disable-line-caching.patch b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-202-avr32-atmel_mpopfb-add-signal-to-disable-line-caching.patch
deleted file mode 100644
index d09823e3b..000000000
--- a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-202-avr32-atmel_mpopfb-add-signal-to-disable-line-caching.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 86fd2e3e74a191ae43122ac18f62f5163c577d4b Mon Sep 17 00:00:00 2001
-From: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-Date: Wed, 26 Nov 2008 14:11:59 +0100
-Subject: [PATCH 3/3] atmel_mpopfb: add signal to disable line caching and set correct output
-
-This patch adds a signal to disable line caching, due to an errata in
-silicon revision A. It also sets the output from MPOP to BGR to match
-big endian framebuffer memory.
-
-Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-
-diff --git a/drivers/video/atmel_mpopfb.c b/drivers/video/atmel_mpopfb.c
-index 3b4b668..350303b 100644
---- a/drivers/video/atmel_mpopfb.c
-+++ b/drivers/video/atmel_mpopfb.c
-@@ -313,6 +313,10 @@ static int atmel_mpopfb_check_var(struct fb_var_screeninfo *var,
- static void atmel_mpopfb_start(struct atmel_mpopfb_info *sinfo)
- {
- if (!sinfo->running) {
-+ unsigned int line_cache_disable =
-+ sinfo->baseimg_info.line_cache_disable ?
-+ ATMEL_MPOP_CR_CACHEDIS_MASK : 0;
-+
- dev_dbg(sinfo->info->device, " * Starting MPOP.\n");
-
- /* Enable all error interrupts. */
-@@ -323,9 +327,9 @@ static void atmel_mpopfb_start(struct atmel_mpopfb_info *sinfo)
- * reading from the slave interface it will start
- * generating a frame.
- */
-- mpop_writel(sinfo, ATMEL_MPOP_CR,
-- ATMEL_MPOP_CR_EN_MASK
-- /*| ATMEL_MPOP_CR_OUT_BGR_MASK */ );
-+ mpop_writel(sinfo, ATMEL_MPOP_CR, ATMEL_MPOP_CR_EN_MASK
-+ | line_cache_disable
-+ | ATMEL_MPOP_CR_OUT_BGR_MASK);
-
- sinfo->running = 1;
- }
-diff --git a/include/linux/atmel_mpopfb.h b/include/linux/atmel_mpopfb.h
-index cd12e16..d0f2505 100644
---- a/include/linux/atmel_mpopfb.h
-+++ b/include/linux/atmel_mpopfb.h
-@@ -42,9 +42,11 @@ struct atmel_mpopfb_baseimg_info {
- unsigned xsize;
- unsigned ysize;
-
-- /* Signal that we should flip the video. */
-+ /* Signal for flipping the video. */
- int flip;
-
-+ /* Signal for disabling the line cache. */
-+ int line_cache_disable;
- };
-
- enum atmel_mpopfb_overlay_type {
---
-1.5.6.3
-
diff --git a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-203-avr32-fix-arch-header-byteorder.patch b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-203-avr32-fix-arch-header-byteorder.patch
deleted file mode 100644
index ac990f9cd..000000000
--- a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-203-avr32-fix-arch-header-byteorder.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-Index: linux-2.6.27.6/arch/avr32/include/asm/byteorder.h
-===================================================================
---- linux-2.6.27.6.orig/arch/avr32/include/asm/byteorder.h 2008-11-28 16:47:15.000000000 +0100
-+++ linux-2.6.27.6/arch/avr32/include/asm/byteorder.h 2008-11-28 16:47:31.000000000 +0100
-@@ -7,8 +7,9 @@
- #include <asm/types.h>
- #include <linux/compiler.h>
-
--#define __BIG_ENDIAN
-+#define __BIG_ENDIAN 4321
- #define __SWAB_64_THRU_32__
-+#define __BYTEORDER_HAS_U64__
-
- #ifdef __CHECKER__
- extern unsigned long __builtin_bswap_32(unsigned long x);
-@@ -33,5 +34,5 @@
- #define __arch_swab32 __arch_swab32
- #endif
-
--#include <linux/byteorder.h>
-+#include <linux/byteorder/big_endian.h>
- #endif /* __ASM_AVR32_BYTEORDER_H */
-Index: linux-2.6.27.6/arch/avr32/mach-at32ap/include/mach/io.h
-===================================================================
---- linux-2.6.27.6.orig/arch/avr32/mach-at32ap/include/mach/io.h 2008-11-28 16:47:58.000000000 +0100
-+++ linux-2.6.27.6/arch/avr32/mach-at32ap/include/mach/io.h 2008-11-28 16:48:15.000000000 +0100
-@@ -1,7 +1,7 @@
- #ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
- #define __ASM_AVR32_ARCH_AT32AP_IO_H
-
--#include <linux/swab.h>
-+#include <linux/byteorder/swabb.h>
-
- #if defined(CONFIG_AP700X_32_BIT_SMC)
- # define __swizzle_addr_b(addr) (addr ^ 3UL)
diff --git a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-204-avr32-ap700x-fix-det_pin-for-nand-flash.patch b/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-204-avr32-ap700x-fix-det_pin-for-nand-flash.patch
deleted file mode 100644
index 2392cbb61..000000000
--- a/target/device/Atmel/arch-avr32/kernel-patches-2.6.27.6/linux-2.6.27.6-204-avr32-ap700x-fix-det_pin-for-nand-flash.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/arch/avr32/boards/atstk1000/atstk1002.c
-+++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -99,6 +99,7 @@ static struct mtd_partition *nand_part_i
- static struct atmel_nand_data atstk1006_nand_data __initdata = {
- .cle = 21,
- .ale = 22,
-+ .det_pin = GPIO_PIN_NONE,
- .rdy_pin = GPIO_PIN_PB(30),
- .enable_pin = GPIO_PIN_PB(29),
- .partition_info = nand_part_info,
---- a/arch/avr32/mach-at32ap/at32ap700x.c
-+++ b/arch/avr32/mach-at32ap/at32ap700x.c
-@@ -1969,13 +1969,14 @@ at32_add_device_nand(unsigned int id, st
- goto fail;
-
- hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_NAND_ENABLE);
-- if (data->enable_pin)
-+
-+ if (gpio_is_valid(data->enable_pin))
- at32_select_gpio(data->enable_pin,
- AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-- if (data->rdy_pin)
-- at32_select_gpio(data->rdy_pin, 0);
-- if (data->det_pin)
-+ if (gpio_is_valid(data->det_pin))
- at32_select_gpio(data->det_pin, 0);
-+ if (gpio_is_valid(data->rdy_pin))
-+ at32_select_gpio(data->rdy_pin, 0);
-
- platform_device_add(pdev);
- return pdev;
diff --git a/target/device/Atmel/misc-patches/README b/target/device/Atmel/misc-patches/README
deleted file mode 100644
index cf51054b0..000000000
--- a/target/device/Atmel/misc-patches/README
+++ /dev/null
@@ -1,2 +0,0 @@
-Copy these patches to kernel-patches, or u-boot for whatever board you are using them on.
-
diff --git a/target/device/Atmel/misc-patches/u-boot-1.3.0-200MHz-ngw100.patch b/target/device/Atmel/misc-patches/u-boot-1.3.0-200MHz-ngw100.patch
deleted file mode 100644
index 9749041aa..000000000
--- a/target/device/Atmel/misc-patches/u-boot-1.3.0-200MHz-ngw100.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/include/configs/atngw100.h 2008-03-02 10:17:04.000000000 -0500
-+++ b/include/configs/atngw100.h 2008-03-02 10:22:46.000000000 -0500
-@@ -42,7 +42,7 @@
- #define CFG_POWER_MANAGER 1
- #define CFG_OSC0_HZ 20000000
- #define CFG_PLL0_DIV 1
--#define CFG_PLL0_MUL 7
-+#define CFG_PLL0_MUL 10
- #define CFG_PLL0_SUPPRESS_CYCLES 16
- #define CFG_CLKDIV_CPU 0
- #define CFG_CLKDIV_HSB 1
-@@ -56,7 +56,7 @@
- *
- * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
- */
--#define CFG_PLL0_OPT 0x04
-+#define CFG_PLL0_OPT 0x06
-
- #define CONFIG_USART1 1
-
diff --git a/target/device/Atmel/misc-patches/u-boot-1.3.0-64MB-sdram-ngw100.patch b/target/device/Atmel/misc-patches/u-boot-1.3.0-64MB-sdram-ngw100.patch
deleted file mode 100644
index b04bbf968..000000000
--- a/target/device/Atmel/misc-patches/u-boot-1.3.0-64MB-sdram-ngw100.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/board/atmel/atngw100/atngw100.c 2008-03-02 10:17:04.000000000 -0500
-+++ b/board/atmel/atngw100/atngw100.c 2008-03-02 10:21:23.000000000 -0500
-@@ -31,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR;
- static const struct sdram_info sdram = {
- .phys_addr = CFG_SDRAM_BASE,
- .row_bits = 13,
-- .col_bits = 9,
-+ .col_bits = 10,
- .bank_bits = 2,
- .cas = 3,
- .twr = 2,
diff --git a/target/device/Atmel/root/device_table.txt b/target/device/Atmel/root/device_table.txt
deleted file mode 100644
index 8b46ca032..000000000
--- a/target/device/Atmel/root/device_table.txt
+++ /dev/null
@@ -1,162 +0,0 @@
-# When building a target filesystem, it is desirable to not have to
-# become root and then run 'mknod' a thousand times. Using a device
-# table you can create device nodes and directories "on the fly".
-#
-# This is a sample device table file for use with genext2fs. You can
-# do all sorts of interesting things with a device table file. For
-# example, if you want to adjust the permissions on a particular file
-# you can just add an entry like:
-# /sbin/foobar f 2755 0 0 - - - - -
-# and (assuming the file /sbin/foobar exists) it will be made setuid
-# root (regardless of what its permissions are on the host filesystem.
-# Furthermore, you can use a single table entry to create a many device
-# minors. For example, if I wanted to create /dev/hda and /dev/hda[0-15]
-# I could just use the following two table entries:
-# /dev/hda b 640 0 0 3 0 0 0 -
-# /dev/hda b 640 0 0 3 1 1 1 15
-#
-# Device table entries take the form of:
-# <name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-# where name is the file name, type can be one of:
-# f A regular file
-# d Directory
-# c Character special device file
-# b Block special device file
-# p Fifo (named pipe)
-# uid is the user id for the target file, gid is the group id for the
-# target file. The rest of the entries (major, minor, etc) apply only
-# to device special files.
-
-# Have fun
-# -Erik Andersen <andersen@codepoet.org>
-#
-
-#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-/dev d 755 0 0 - - - - -
-/dev/pts d 755 0 0 - - - - -
-/tmp d 1777 0 0 - - - - -
-/etc d 755 0 0 - - - - -
-/home/default d 2755 1000 1000 - - - - -
-#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-/bin/busybox f 4755 0 0 - - - - -
-/etc/shadow f 600 0 0 - - - - -
-/etc/passwd f 644 0 0 - - - - -
-/etc/network/if-up.d d 755 0 0 - - - - -
-/etc/network/if-pre-up.d d 755 0 0 - - - - -
-/etc/network/if-down.d d 755 0 0 - - - - -
-/etc/network/if-post-down.d d 755 0 0 - - - - -
-/usr/share/udhcpc/default.script f 755 0 0 - - - - -
-# uncomment this to allow starting x as non-root
-#/usr/X11R6/bin/Xfbdev f 4755 0 0 - - - - -
-# Normal system devices
-/dev/mem c 640 0 0 1 1 0 0 -
-/dev/kmem c 640 0 0 1 2 0 0 -
-/dev/null c 666 0 0 1 3 0 0 -
-/dev/zero c 666 0 0 1 5 0 0 -
-/dev/random c 666 0 0 1 8 0 0 -
-/dev/urandom c 666 0 0 1 9 0 0 -
-/dev/ram b 640 0 0 1 1 0 0 -
-/dev/ram b 640 0 0 1 0 0 1 4
-/dev/loop b 640 0 0 7 0 0 1 2
-/dev/rtc c 640 0 0 10 135 - - -
-/dev/console c 666 0 0 5 1 - - -
-/dev/tty c 666 0 0 5 0 - - -
-/dev/tty c 666 0 0 4 0 0 1 8
-/dev/ttyp c 666 0 0 3 0 0 1 10
-/dev/ptyp c 666 0 0 2 0 0 1 10
-/dev/ptmx c 666 0 0 5 2 - - -
-/dev/ttyP c 666 0 0 57 0 0 1 4
-/dev/ttyS c 666 0 0 4 64 0 1 4
-/dev/fb c 640 0 5 29 0 0 32 4
-#/dev/ttySA c 666 0 0 204 5 0 1 3
-/dev/psaux c 666 0 0 10 1 0 0 -
-#/dev/ppp c 666 0 0 108 0 - - -
-
-# MTD stuff
-/dev/mtd c 640 0 0 90 0 0 2 4
-/dev/mtdblock b 640 0 0 31 0 0 1 4
-
-#Tun/tap driver
-/dev/net d 755 0 0 - - - - -
-/dev/net/tun c 660 0 0 10 200 - - -
-
-# Audio stuff
-#/dev/audio c 666 0 29 14 4 - - -
-#/dev/audio1 c 666 0 29 14 20 - - -
-#/dev/dsp c 666 0 29 14 3 - - -
-#/dev/dsp1 c 666 0 29 14 19 - - -
-#/dev/sndstat c 666 0 29 14 6 - - -
-
-# User-mode Linux stuff
-/dev/ubda b 640 0 0 98 0 0 0 -
-/dev/ubda b 640 0 0 98 1 1 1 15
-
-# IDE Devices
-/dev/hda b 640 0 0 3 0 0 0 -
-/dev/hda b 640 0 0 3 1 1 1 15
-/dev/hdb b 640 0 0 3 64 0 0 -
-/dev/hdb b 640 0 0 3 65 1 1 15
-#/dev/hdc b 640 0 0 22 0 0 0 -
-#/dev/hdc b 640 0 0 22 1 1 1 15
-#/dev/hdd b 640 0 0 22 64 0 0 -
-#/dev/hdd b 640 0 0 22 65 1 1 15
-#/dev/hde b 640 0 0 33 0 0 0 -
-#/dev/hde b 640 0 0 33 1 1 1 15
-#/dev/hdf b 640 0 0 33 64 0 0 -
-#/dev/hdf b 640 0 0 33 65 1 1 15
-#/dev/hdg b 640 0 0 34 0 0 0 -
-#/dev/hdg b 640 0 0 34 1 1 1 15
-#/dev/hdh b 640 0 0 34 64 0 0 -
-#/dev/hdh b 640 0 0 34 65 1 1 15
-
-# SCSI Devices
-#/dev/sda b 640 0 0 8 0 0 0 -
-#/dev/sda b 640 0 0 8 1 1 1 15
-#/dev/sdb b 640 0 0 8 16 0 0 -
-#/dev/sdb b 640 0 0 8 17 1 1 15
-#/dev/sdc b 640 0 0 8 32 0 0 -
-#/dev/sdc b 640 0 0 8 33 1 1 15
-#/dev/sdd b 640 0 0 8 48 0 0 -
-#/dev/sdd b 640 0 0 8 49 1 1 15
-#/dev/sde b 640 0 0 8 64 0 0 -
-#/dev/sde b 640 0 0 8 65 1 1 15
-#/dev/sdf b 640 0 0 8 80 0 0 -
-#/dev/sdf b 640 0 0 8 81 1 1 15
-#/dev/sdg b 640 0 0 8 96 0 0 -
-#/dev/sdg b 640 0 0 8 97 1 1 15
-#/dev/sdh b 640 0 0 8 112 0 0 -
-#/dev/sdh b 640 0 0 8 113 1 1 15
-#/dev/sg c 640 0 0 21 0 0 1 15
-#/dev/scd b 640 0 0 11 0 0 1 15
-#/dev/st c 640 0 0 9 0 0 1 8
-#/dev/nst c 640 0 0 9 128 0 1 8
-#/dev/st c 640 0 0 9 32 1 1 4
-#/dev/st c 640 0 0 9 64 1 1 4
-#/dev/st c 640 0 0 9 96 1 1 4
-
-# Floppy disk devices
-#/dev/fd b 640 0 0 2 0 0 1 2
-#/dev/fd0d360 b 640 0 0 2 4 0 0 -
-#/dev/fd1d360 b 640 0 0 2 5 0 0 -
-#/dev/fd0h1200 b 640 0 0 2 8 0 0 -
-#/dev/fd1h1200 b 640 0 0 2 9 0 0 -
-#/dev/fd0u1440 b 640 0 0 2 28 0 0 -
-#/dev/fd1u1440 b 640 0 0 2 29 0 0 -
-#/dev/fd0u2880 b 640 0 0 2 32 0 0 -
-#/dev/fd1u2880 b 640 0 0 2 33 0 0 -
-
-# All the proprietary cdrom devices in the world
-#/dev/aztcd b 640 0 0 29 0 0 0 -
-#/dev/bpcd b 640 0 0 41 0 0 0 -
-#/dev/capi20 c 640 0 0 68 0 0 1 2
-#/dev/cdu31a b 640 0 0 15 0 0 0 -
-#/dev/cdu535 b 640 0 0 24 0 0 0 -
-#/dev/cm206cd b 640 0 0 32 0 0 0 -
-#/dev/sjcd b 640 0 0 18 0 0 0 -
-#/dev/sonycd b 640 0 0 15 0 0 0 -
-#/dev/gscd b 640 0 0 16 0 0 0 -
-#/dev/sbpcd b 640 0 0 25 0 0 0 -
-#/dev/sbpcd b 640 0 0 25 0 0 1 4
-#/dev/mcd b 640 0 0 23 0 0 0 -
-#/dev/optcd b 640 0 0 17 0 0 0 -
-
diff --git a/target/device/Atmel/root/skel.patch b/target/device/Atmel/root/skel.patch
deleted file mode 100644
index fce5ca9c6..000000000
--- a/target/device/Atmel/root/skel.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-diff -urN target_skeleton_atmel/etc/group target_skeleton/etc/group
---- target_skeleton_atmel/etc/group 2006-11-01 21:24:48.000000000 +0100
-+++ target_skeleton/etc/group 2007-04-05 12:37:05.000000000 +0200
-@@ -8,6 +8,8 @@
- wheel:x:10:root
- utmp:x:43:
- staff:x:50:
-+haldaemon:x:68:
-+dbus:x:81:
- nobody:x:99:
- nogroup:x:99:
- users:x:100:
-diff -urN target_skeleton_atmel/etc/inittab target_skeleton/etc/inittab
---- target_skeleton_atmel/etc/inittab 2006-11-01 21:24:48.000000000 +0100
-+++ target_skeleton/etc/inittab 2007-04-05 12:37:05.000000000 +0200
-@@ -24,17 +24,17 @@
- ::sysinit:/etc/init.d/rcS
-
- # Set up a couple of getty's
--#tty1::respawn:/sbin/getty 38400 tty1
--#tty2::respawn:/sbin/getty 38400 tty2
-+tty1::respawn:/sbin/getty 38400 tty1
-+tty2::respawn:/sbin/getty 38400 tty2
-
- # Put a getty on the serial port
--ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100
-+#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100
-
- # Logging junk
- null::sysinit:/bin/touch /var/log/messages
- null::respawn:/sbin/syslogd -n -m 0
- null::respawn:/sbin/klogd -n
--#tty3::respawn:/usr/bin/tail -f /var/log/messages
-+tty3::respawn:/usr/bin/tail -f /var/log/messages
-
- # Stuff to do for the 3-finger salute
- ::ctrlaltdel:/sbin/reboot
-diff -urN target_skeleton_atmel/etc/passwd target_skeleton/etc/passwd
---- target_skeleton_atmel/etc/passwd 2006-11-01 21:24:48.000000000 +0100
-+++ target_skeleton/etc/passwd 2007-04-05 12:37:05.000000000 +0200
-@@ -8,6 +8,8 @@
- www-data:x:33:33:www-data:/var/www:/bin/sh
- backup:x:34:34:backup:/var/backups:/bin/sh
- operator:x:37:37:Operator:/var:/bin/sh
--sshd:x:103:99:Operator:/var:/bin/sh
-+haldaemon:x:68:68:hald:/:/bin/sh
-+dbus:x:81:81:dbus:/var/run/dbus:/bin/sh
- nobody:x:99:99:nobody:/home:/bin/sh
-+sshd:x:103:99:Operator:/var:/bin/sh
- default:x:1000:1000:Default non-root user:/home/default:/bin/sh
-Filerna target_skeleton_atmel/etc/random-seed och target_skeleton/etc/random-seed skiljer
-diff -urN target_skeleton_atmel/etc/resolv.conf target_skeleton/etc/resolv.conf
---- target_skeleton_atmel/etc/resolv.conf 2006-11-01 21:24:48.000000000 +0100
-+++ target_skeleton/etc/resolv.conf 1970-01-01 01:00:00.000000000 +0100
-@@ -1,2 +0,0 @@
--domain dev.null
--nameserver 127.0.0.1
-diff -urN target_skeleton_atmel/root/.bashrc target_skeleton/root/.bashrc
---- target_skeleton_atmel/root/.bashrc 2006-11-01 21:24:49.000000000 +0100
-+++ target_skeleton/root/.bashrc 2007-04-05 12:37:04.000000000 +0200
-@@ -37,8 +37,8 @@
- alias ps1='ps faxo "%U %t %p %a" '
- alias af='ps af'
- alias cls='clear'
-- alias ll='/bin/ls -laFh'
-- alias ls='/bin/ls -F'
-+ alias ll='/bin/ls --color=tty -laFh'
-+ alias ls='/bin/ls --color=tty -F'
- alias df='df -h'
- alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
- #alias bc='bc -l'
diff --git a/target/device/Atmel/root/skel.tar.gz b/target/device/Atmel/root/skel.tar.gz
deleted file mode 100644
index dacbf6c48..000000000
--- a/target/device/Atmel/root/skel.tar.gz
+++ /dev/null
Binary files differ
diff --git a/target/device/Atmel/root/target_skeleton/bin/.empty b/target/device/Atmel/root/target_skeleton/bin/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/bin/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/boot/.empty b/target/device/Atmel/root/target_skeleton/boot/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/boot/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/config/.empty b/target/device/Atmel/root/target_skeleton/config/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/config/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/dev/.empty b/target/device/Atmel/root/target_skeleton/dev/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/dev/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/etc/TZ b/target/device/Atmel/root/target_skeleton/etc/TZ
deleted file mode 100644
index 9fcb2a3c5..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/TZ
+++ /dev/null
@@ -1 +0,0 @@
-MST7MDT
diff --git a/target/device/Atmel/root/target_skeleton/etc/fstab b/target/device/Atmel/root/target_skeleton/etc/fstab
deleted file mode 100644
index 4302748ca..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/fstab
+++ /dev/null
@@ -1,9 +0,0 @@
-# /etc/fstab: static file system information.
-#
-# <file system> <mount pt> <type> <options> <dump> <pass>
-/dev/root / ext2 rw,noauto 0 1
-proc /proc proc defaults 0 0
-devpts /dev/pts devpts defaults,gid=5,mode=620 0 0
-tmpfs /tmp tmpfs defaults 0 0
-sysfs /sys sysfs defaults 0 0
-
diff --git a/target/device/Atmel/root/target_skeleton/etc/group b/target/device/Atmel/root/target_skeleton/etc/group
deleted file mode 100644
index f78c22cda..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/group
+++ /dev/null
@@ -1,16 +0,0 @@
-root:x:0:
-daemon:x:1:
-bin:x:2:
-sys:x:3:
-adm:x:4:
-tty:x:5:
-disk:x:6:
-wheel:x:10:root
-utmp:x:43:
-staff:x:50:
-haldaemon:x:68:
-dbus:x:81:
-nobody:x:99:
-nogroup:x:99:
-users:x:100:
-default:x:1000:
diff --git a/target/device/Atmel/root/target_skeleton/etc/hostname b/target/device/Atmel/root/target_skeleton/etc/hostname
deleted file mode 100644
index 5b26b355e..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/hostname
+++ /dev/null
@@ -1 +0,0 @@
-buildroot
diff --git a/target/device/Atmel/root/target_skeleton/etc/hosts b/target/device/Atmel/root/target_skeleton/etc/hosts
deleted file mode 100644
index ba712fe03..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/hosts
+++ /dev/null
@@ -1 +0,0 @@
-127.0.0.1 localhost
diff --git a/target/device/Atmel/root/target_skeleton/etc/init.d/S20urandom b/target/device/Atmel/root/target_skeleton/etc/init.d/S20urandom
deleted file mode 100755
index f73cea59e..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/init.d/S20urandom
+++ /dev/null
@@ -1,54 +0,0 @@
-#! /bin/sh
-#
-# urandom This script saves the random seed between reboots.
-# It is called from the boot, halt and reboot scripts.
-#
-# Version: @(#)urandom 1.33 22-Jun-1998 miquels@cistron.nl
-#
-
-[ -c /dev/urandom ] || exit 0
-#. /etc/default/rcS
-
-case "$1" in
- start|"")
- if [ "$VERBOSE" != no ]
- then
- echo -n "Initializing random number generator... "
- fi
- # Load and then save 512 bytes,
- # which is the size of the entropy pool
- if [ -f /etc/random-seed ]
- then
- cat /etc/random-seed >/dev/urandom
- fi
- # check for read only file system
- if ! touch /etc/random-seed 2>/dev/null
- then
- echo "read-only file system detected...done"
- exit
- fi
- rm -f /etc/random-seed
- umask 077
- dd if=/dev/urandom of=/etc/random-seed count=1 \
- >/dev/null 2>&1 || echo "urandom start: failed."
- umask 022
- [ "$VERBOSE" != no ] && echo "done."
- ;;
- stop)
- if ! touch /etc/random-seed 2>/dev/null
- then
- exit
- fi
- # Carry a random seed from shut-down to start-up;
- # see documentation in linux/drivers/char/random.c
- [ "$VERBOSE" != no ] && echo -n "Saving random seed... "
- umask 077
- dd if=/dev/urandom of=/etc/random-seed count=1 \
- >/dev/null 2>&1 || echo "urandom stop: failed."
- [ "$VERBOSE" != no ] && echo "done."
- ;;
- *)
- echo "Usage: urandom {start|stop}" >&2
- exit 1
- ;;
-esac
diff --git a/target/device/Atmel/root/target_skeleton/etc/init.d/S40network b/target/device/Atmel/root/target_skeleton/etc/init.d/S40network
deleted file mode 100755
index d835d9c72..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/init.d/S40network
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/bin/sh
-#
-# Start the network....
-#
-
-start() {
- echo "Starting network..."
- /sbin/ifup -a
-}
-stop() {
- echo -n "Stopping network..."
- /sbin/ifdown -a
-}
-restart() {
- stop
- start
-}
-
-case "$1" in
- start)
- start
- ;;
- stop)
- stop
- ;;
- restart|reload)
- restart
- ;;
- *)
- echo $"Usage: $0 {start|stop|restart}"
- exit 1
-esac
-
-exit $?
-
diff --git a/target/device/Atmel/root/target_skeleton/etc/init.d/rcS b/target/device/Atmel/root/target_skeleton/etc/init.d/rcS
deleted file mode 100755
index de411534d..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/init.d/rcS
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/sh
-
-
-# Start all init scripts in /etc/init.d
-# executing them in numerical order.
-#
-for i in /etc/init.d/S??* ;do
-
- # Ignore dangling symlinks (if any).
- [ ! -f "$i" ] && continue
-
- case "$i" in
- *.sh)
- # Source shell script for speed.
- (
- trap - INT QUIT TSTP
- set start
- . $i
- )
- ;;
- *)
- # No sh extension, so fork subprocess.
- $i start
- ;;
- esac
-done
-
diff --git a/target/device/Atmel/root/target_skeleton/etc/inittab b/target/device/Atmel/root/target_skeleton/etc/inittab
deleted file mode 100644
index 2e3b9a44a..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/inittab
+++ /dev/null
@@ -1,45 +0,0 @@
-# /etc/inittab
-#
-# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>
-#
-# Note: BusyBox init doesn't support runlevels. The runlevels field is
-# completely ignored by BusyBox init. If you want runlevels, use
-# sysvinit.
-#
-# Format for each entry: <id>:<runlevels>:<action>:<process>
-#
-# id == tty to run on, or empty for /dev/console
-# runlevels == ignored
-# action == one of sysinit, respawn, askfirst, wait, and once
-# process == program to run
-
-# Startup the system
-null::sysinit:/bin/mount -o remount,rw /
-null::sysinit:/bin/mount -t proc proc /proc
-null::sysinit:/bin/mount -a
-null::sysinit:/bin/hostname -F /etc/hostname
-# now run any rc scripts
-::sysinit:/etc/init.d/rcS
-
-# Set up a couple of getty's
-#tty1::respawn:/sbin/getty 38400 tty1
-#tty2::respawn:/sbin/getty 38400 tty2
-
-# Put a getty on the serial port
-ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100
-
-# Logging junk
-null::sysinit:/bin/touch /var/log/messages
-null::respawn:/sbin/syslogd -n -m 0
-null::respawn:/sbin/klogd -n
-tty3::respawn:/usr/bin/tail -f /var/log/messages
-
-# Stuff to do for the 3-finger salute
-::ctrlaltdel:/sbin/reboot
-
-# Stuff to do before rebooting
-null::shutdown:/usr/bin/killall klogd
-null::shutdown:/usr/bin/killall syslogd
-null::shutdown:/bin/umount -a -r
-null::shutdown:/sbin/swapoff -a
-
diff --git a/target/device/Atmel/root/target_skeleton/etc/inputrc b/target/device/Atmel/root/target_skeleton/etc/inputrc
deleted file mode 100644
index 2f1cb601a..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/inputrc
+++ /dev/null
@@ -1,44 +0,0 @@
-# /etc/inputrc - global inputrc for libreadline
-# See readline(3readline) and `info readline' for more information.
-
-# Be 8 bit clean.
-set input-meta on
-set output-meta on
-set bell-style visible
-
-# To allow the use of 8bit-characters like the german umlauts, comment out
-# the line below. However this makes the meta key not work as a meta key,
-# which is annoying to those which don't need to type in 8-bit characters.
-
-# set convert-meta off
-
-"\e0d": backward-word
-"\e0c": forward-word
-"\e[h": beginning-of-line
-"\e[f": end-of-line
-"\e[1~": beginning-of-line
-"\e[4~": end-of-line
-#"\e[5~": beginning-of-history
-#"\e[6~": end-of-history
-"\e[3~": delete-char
-"\e[2~": quoted-insert
-
-# Common standard keypad and cursor
-# (codes courtsey Werner Fink, <werner@suse.de>)
-#"\e[1~": history-search-backward
-"\e[2~": yank
-"\e[3~": delete-char
-#"\e[4~": set-mark
-"\e[5~": history-search-backward
-"\e[6~": history-search-forward
-# Normal keypad and cursor of xterm
-"\e[F": end-of-line
-"\e[H": beginning-of-line
-# Application keypad and cursor of xterm
-"\eOA": previous-history
-"\eOC": forward-char
-"\eOB": next-history
-"\eOD": backward-char
-"\eOF": end-of-line
-"\eOH": beginning-of-line
-
diff --git a/target/device/Atmel/root/target_skeleton/etc/issue b/target/device/Atmel/root/target_skeleton/etc/issue
deleted file mode 100644
index 90f177983..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/issue
+++ /dev/null
@@ -1,3 +0,0 @@
-
-Welcome to Buildroot
-
diff --git a/target/device/Atmel/root/target_skeleton/etc/ld.so.conf b/target/device/Atmel/root/target_skeleton/etc/ld.so.conf
deleted file mode 100644
index 83327c01b..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/ld.so.conf
+++ /dev/null
@@ -1 +0,0 @@
-include /etc/ld.so.conf.d/*.conf
diff --git a/target/device/Atmel/root/target_skeleton/etc/ld.so.conf.d/.empty b/target/device/Atmel/root/target_skeleton/etc/ld.so.conf.d/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/ld.so.conf.d/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/etc/network/interfaces b/target/device/Atmel/root/target_skeleton/etc/network/interfaces
deleted file mode 100644
index 218b82cde..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/network/interfaces
+++ /dev/null
@@ -1,4 +0,0 @@
-# Configure Loopback
-auto lo
-iface lo inet loopback
-
diff --git a/target/device/Atmel/root/target_skeleton/etc/passwd b/target/device/Atmel/root/target_skeleton/etc/passwd
deleted file mode 100644
index 377d4df5b..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/passwd
+++ /dev/null
@@ -1,15 +0,0 @@
-root:x:0:0:root:/root:/bin/sh
-daemon:x:1:1:daemon:/usr/sbin:/bin/sh
-bin:x:2:2:bin:/bin:/bin/sh
-sys:x:3:3:sys:/dev:/bin/sh
-sync:x:4:100:sync:/bin:/bin/sync
-mail:x:8:8:mail:/var/spool/mail:/bin/sh
-proxy:x:13:13:proxy:/bin:/bin/sh
-www-data:x:33:33:www-data:/var/www:/bin/sh
-backup:x:34:34:backup:/var/backups:/bin/sh
-operator:x:37:37:Operator:/var:/bin/sh
-haldaemon:x:68:68:hald:/:/bin/sh
-dbus:x:81:81:dbus:/var/run/dbus:/bin/sh
-nobody:x:99:99:nobody:/home:/bin/sh
-sshd:x:103:99:Operator:/var:/bin/sh
-default:x:1000:1000:Default non-root user:/home/default:/bin/sh
diff --git a/target/device/Atmel/root/target_skeleton/etc/profile b/target/device/Atmel/root/target_skeleton/etc/profile
deleted file mode 100644
index cc2e0beb8..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/profile
+++ /dev/null
@@ -1,48 +0,0 @@
-# ~/.bashrc: executed by bash(1) for non-login interactive shells.
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-# If running interactively, then:
-if [ "$PS1" ]; then
-
- if [ "$BASH" ]; then
- export PS1="[\u@\h \W]\\$ "
- alias ll='/bin/ls --color=tty -laFh'
- alias ls='/bin/ls --color=tty -F'
- export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
- else
- if [ "`id -u`" -eq 0 ]; then
- export PS1='# '
- else
- export PS1='$ '
- fi
- fi
-
- export USER=`id -un`
- export LOGNAME=$USER
- export HOSTNAME=`/bin/hostname`
- export HISTSIZE=1000
- export HISTFILESIZE=1000
- export PAGER='/bin/more '
- export EDITOR='/bin/vi'
- export INPUTRC=/etc/inputrc
- export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
-
- ### Some aliases
- alias ps2='ps facux '
- alias ps1='ps faxo "%U %t %p %a" '
- alias af='ps af'
- alias cls='clear'
- alias df='df -h'
- alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
- #alias bc='bc -l'
- alias minicom='minicom -c on'
- alias calc='calc -Cd '
- alias bc='calc -Cd '
-fi;
diff --git a/target/device/Atmel/root/target_skeleton/etc/protocols b/target/device/Atmel/root/target_skeleton/etc/protocols
deleted file mode 100644
index 1ac8a4096..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/protocols
+++ /dev/null
@@ -1,31 +0,0 @@
-# /etc/protocols:
-# $Id: protocols,v 1.1 2004/10/09 02:49:18 andersen Exp $
-#
-# Internet (IP) protocols
-#
-# from: @(#)protocols 5.1 (Berkeley) 4/17/89
-#
-# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
-
-ip 0 IP # internet protocol, pseudo protocol number
-icmp 1 ICMP # internet control message protocol
-igmp 2 IGMP # Internet Group Management
-ggp 3 GGP # gateway-gateway protocol
-ipencap 4 IP-ENCAP # IP encapsulated in IP (officially ``IP'')
-st 5 ST # ST datagram mode
-tcp 6 TCP # transmission control protocol
-egp 8 EGP # exterior gateway protocol
-pup 12 PUP # PARC universal packet protocol
-udp 17 UDP # user datagram protocol
-hmp 20 HMP # host monitoring protocol
-xns-idp 22 XNS-IDP # Xerox NS IDP
-rdp 27 RDP # "reliable datagram" protocol
-iso-tp4 29 ISO-TP4 # ISO Transport Protocol class 4
-xtp 36 XTP # Xpress Tranfer Protocol
-ddp 37 DDP # Datagram Delivery Protocol
-idpr-cmtp 39 IDPR-CMTP # IDPR Control Message Transport
-rspf 73 RSPF #Radio Shortest Path First.
-vmtp 81 VMTP # Versatile Message Transport
-ospf 89 OSPFIGP # Open Shortest Path First IGP
-ipip 94 IPIP # Yet Another IP encapsulation
-encap 98 ENCAP # Yet Another IP encapsulation
diff --git a/target/device/Atmel/root/target_skeleton/etc/random-seed b/target/device/Atmel/root/target_skeleton/etc/random-seed
deleted file mode 100644
index f26038adc..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/random-seed
+++ /dev/null
Binary files differ
diff --git a/target/device/Atmel/root/target_skeleton/etc/securetty b/target/device/Atmel/root/target_skeleton/etc/securetty
deleted file mode 100644
index 81616f38e..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/securetty
+++ /dev/null
@@ -1,12 +0,0 @@
-tty1
-tty2
-tty3
-tty4
-tty5
-tty6
-tty7
-tty8
-ttyS0
-ttyS1
-ttyS2
-ttyS3
diff --git a/target/device/Atmel/root/target_skeleton/etc/services b/target/device/Atmel/root/target_skeleton/etc/services
deleted file mode 100644
index b287b63ea..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/services
+++ /dev/null
@@ -1,302 +0,0 @@
-# /etc/services:
-# $Id: services,v 1.1 2004/10/09 02:49:18 andersen Exp $
-#
-# Network services, Internet style
-#
-# Note that it is presently the policy of IANA to assign a single well-known
-# port number for both TCP and UDP; hence, most entries here have two entries
-# even if the protocol doesn't support UDP operations.
-# Updated from RFC 1700, ``Assigned Numbers'' (October 1994). Not all ports
-# are included, only the more common ones.
-
-tcpmux 1/tcp # TCP port service multiplexer
-echo 7/tcp
-echo 7/udp
-discard 9/tcp sink null
-discard 9/udp sink null
-systat 11/tcp users
-daytime 13/tcp
-daytime 13/udp
-netstat 15/tcp
-qotd 17/tcp quote
-msp 18/tcp # message send protocol
-msp 18/udp # message send protocol
-chargen 19/tcp ttytst source
-chargen 19/udp ttytst source
-ftp-data 20/tcp
-ftp 21/tcp
-fsp 21/udp fspd
-ssh 22/tcp # SSH Remote Login Protocol
-ssh 22/udp # SSH Remote Login Protocol
-telnet 23/tcp
-# 24 - private
-smtp 25/tcp mail
-# 26 - unassigned
-time 37/tcp timserver
-time 37/udp timserver
-rlp 39/udp resource # resource location
-nameserver 42/tcp name # IEN 116
-whois 43/tcp nicname
-re-mail-ck 50/tcp # Remote Mail Checking Protocol
-re-mail-ck 50/udp # Remote Mail Checking Protocol
-domain 53/tcp nameserver # name-domain server
-domain 53/udp nameserver
-mtp 57/tcp # deprecated
-bootps 67/tcp # BOOTP server
-bootps 67/udp
-bootpc 68/tcp # BOOTP client
-bootpc 68/udp
-tftp 69/udp
-gopher 70/tcp # Internet Gopher
-gopher 70/udp
-rje 77/tcp netrjs
-finger 79/tcp
-www 80/tcp http # WorldWideWeb HTTP
-www 80/udp # HyperText Transfer Protocol
-link 87/tcp ttylink
-kerberos 88/tcp kerberos5 krb5 # Kerberos v5
-kerberos 88/udp kerberos5 krb5 # Kerberos v5
-supdup 95/tcp
-# 100 - reserved
-hostnames 101/tcp hostname # usually from sri-nic
-iso-tsap 102/tcp tsap # part of ISODE.
-csnet-ns 105/tcp cso-ns # also used by CSO name server
-csnet-ns 105/udp cso-ns
-# unfortunately the poppassd (Eudora) uses a port which has already
-# been assigned to a different service. We list the poppassd as an
-# alias here. This should work for programs asking for this service.
-# (due to a bug in inetd the 3com-tsmux line is disabled)
-#3com-tsmux 106/tcp poppassd
-#3com-tsmux 106/udp poppassd
-rtelnet 107/tcp # Remote Telnet
-rtelnet 107/udp
-pop-2 109/tcp postoffice # POP version 2
-pop-2 109/udp
-pop-3 110/tcp # POP version 3
-pop-3 110/udp
-sunrpc 111/tcp portmapper # RPC 4.0 portmapper TCP
-sunrpc 111/udp portmapper # RPC 4.0 portmapper UDP
-auth 113/tcp authentication tap ident
-sftp 115/tcp
-uucp-path 117/tcp
-nntp 119/tcp readnews untp # USENET News Transfer Protocol
-ntp 123/tcp
-ntp 123/udp # Network Time Protocol
-netbios-ns 137/tcp # NETBIOS Name Service
-netbios-ns 137/udp
-netbios-dgm 138/tcp # NETBIOS Datagram Service
-netbios-dgm 138/udp
-netbios-ssn 139/tcp # NETBIOS session service
-netbios-ssn 139/udp
-imap2 143/tcp # Interim Mail Access Proto v2
-imap2 143/udp
-snmp 161/udp # Simple Net Mgmt Proto
-snmp-trap 162/udp snmptrap # Traps for SNMP
-cmip-man 163/tcp # ISO mgmt over IP (CMOT)
-cmip-man 163/udp
-cmip-agent 164/tcp
-cmip-agent 164/udp
-xdmcp 177/tcp # X Display Mgr. Control Proto
-xdmcp 177/udp
-nextstep 178/tcp NeXTStep NextStep # NeXTStep window
-nextstep 178/udp NeXTStep NextStep # server
-bgp 179/tcp # Border Gateway Proto.
-bgp 179/udp
-prospero 191/tcp # Cliff Neuman's Prospero
-prospero 191/udp
-irc 194/tcp # Internet Relay Chat
-irc 194/udp
-smux 199/tcp # SNMP Unix Multiplexer
-smux 199/udp
-at-rtmp 201/tcp # AppleTalk routing
-at-rtmp 201/udp
-at-nbp 202/tcp # AppleTalk name binding
-at-nbp 202/udp
-at-echo 204/tcp # AppleTalk echo
-at-echo 204/udp
-at-zis 206/tcp # AppleTalk zone information
-at-zis 206/udp
-qmtp 209/tcp # The Quick Mail Transfer Protocol
-qmtp 209/udp # The Quick Mail Transfer Protocol
-z3950 210/tcp wais # NISO Z39.50 database
-z3950 210/udp wais
-ipx 213/tcp # IPX
-ipx 213/udp
-imap3 220/tcp # Interactive Mail Access
-imap3 220/udp # Protocol v3
-ulistserv 372/tcp # UNIX Listserv
-ulistserv 372/udp
-https 443/tcp # MCom
-https 443/udp # MCom
-snpp 444/tcp # Simple Network Paging Protocol
-snpp 444/udp # Simple Network Paging Protocol
-saft 487/tcp # Simple Asynchronous File Transfer
-saft 487/udp # Simple Asynchronous File Transfer
-npmp-local 610/tcp dqs313_qmaster # npmp-local / DQS
-npmp-local 610/udp dqs313_qmaster # npmp-local / DQS
-npmp-gui 611/tcp dqs313_execd # npmp-gui / DQS
-npmp-gui 611/udp dqs313_execd # npmp-gui / DQS
-hmmp-ind 612/tcp dqs313_intercell# HMMP Indication / DQS
-hmmp-ind 612/udp dqs313_intercell# HMMP Indication / DQS
-#
-# UNIX specific services
-#
-exec 512/tcp
-biff 512/udp comsat
-login 513/tcp
-who 513/udp whod
-shell 514/tcp cmd # no passwords used
-syslog 514/udp
-printer 515/tcp spooler # line printer spooler
-talk 517/udp
-ntalk 518/udp
-route 520/udp router routed # RIP
-timed 525/udp timeserver
-tempo 526/tcp newdate
-courier 530/tcp rpc
-conference 531/tcp chat
-netnews 532/tcp readnews
-netwall 533/udp # -for emergency broadcasts
-uucp 540/tcp uucpd # uucp daemon
-afpovertcp 548/tcp # AFP over TCP
-afpovertcp 548/udp # AFP over TCP
-remotefs 556/tcp rfs_server rfs # Brunhoff remote filesystem
-klogin 543/tcp # Kerberized `rlogin' (v5)
-kshell 544/tcp krcmd # Kerberized `rsh' (v5)
-kerberos-adm 749/tcp # Kerberos `kadmin' (v5)
-#
-webster 765/tcp # Network dictionary
-webster 765/udp
-#
-# From ``Assigned Numbers'':
-#
-#> The Registered Ports are not controlled by the IANA and on most systems
-#> can be used by ordinary user processes or programs executed by ordinary
-#> users.
-#
-#> Ports are used in the TCP [45,106] to name the ends of logical
-#> connections which carry long term conversations. For the purpose of
-#> providing services to unknown callers, a service contact port is
-#> defined. This list specifies the port used by the server process as its
-#> contact port. While the IANA can not control uses of these ports it
-#> does register or list uses of these ports as a convienence to the
-#> community.
-#
-nfsdstatus 1110/tcp
-nfsd-keepalive 1110/udp
-
-ingreslock 1524/tcp
-ingreslock 1524/udp
-prospero-np 1525/tcp # Prospero non-privileged
-prospero-np 1525/udp
-datametrics 1645/tcp old-radius # datametrics / old radius entry
-datametrics 1645/udp old-radius # datametrics / old radius entry
-sa-msg-port 1646/tcp old-radacct # sa-msg-port / old radacct entry
-sa-msg-port 1646/udp old-radacct # sa-msg-port / old radacct entry
-radius 1812/tcp # Radius
-radius 1812/udp # Radius
-radacct 1813/tcp # Radius Accounting
-radacct 1813/udp # Radius Accounting
-nfsd 2049/tcp nfs
-nfsd 2049/udp nfs
-cvspserver 2401/tcp # CVS client/server operations
-cvspserver 2401/udp # CVS client/server operations
-mysql 3306/tcp # MySQL
-mysql 3306/udp # MySQL
-rfe 5002/tcp # Radio Free Ethernet
-rfe 5002/udp # Actually uses UDP only
-cfengine 5308/tcp # CFengine
-cfengine 5308/udp # CFengine
-bbs 7000/tcp # BBS service
-#
-#
-# Kerberos (Project Athena/MIT) services
-# Note that these are for Kerberos v4, and are unofficial. Sites running
-# v4 should uncomment these and comment out the v5 entries above.
-#
-kerberos4 750/udp kerberos-iv kdc # Kerberos (server) udp
-kerberos4 750/tcp kerberos-iv kdc # Kerberos (server) tcp
-kerberos_master 751/udp # Kerberos authentication
-kerberos_master 751/tcp # Kerberos authentication
-passwd_server 752/udp # Kerberos passwd server
-krb_prop 754/tcp # Kerberos slave propagation
-krbupdate 760/tcp kreg # Kerberos registration
-kpasswd 761/tcp kpwd # Kerberos "passwd"
-kpop 1109/tcp # Pop with Kerberos
-knetd 2053/tcp # Kerberos de-multiplexor
-zephyr-srv 2102/udp # Zephyr server
-zephyr-clt 2103/udp # Zephyr serv-hm connection
-zephyr-hm 2104/udp # Zephyr hostmanager
-eklogin 2105/tcp # Kerberos encrypted rlogin
-#
-# Unofficial but necessary (for NetBSD) services
-#
-supfilesrv 871/tcp # SUP server
-supfiledbg 1127/tcp # SUP debugging
-#
-# Datagram Delivery Protocol services
-#
-rtmp 1/ddp # Routing Table Maintenance Protocol
-nbp 2/ddp # Name Binding Protocol
-echo 4/ddp # AppleTalk Echo Protocol
-zip 6/ddp # Zone Information Protocol
-#
-# Services added for the Debian GNU/Linux distribution
-poppassd 106/tcp # Eudora
-poppassd 106/udp # Eudora
-mailq 174/tcp # Mailer transport queue for Zmailer
-mailq 174/tcp # Mailer transport queue for Zmailer
-omirr 808/tcp omirrd # online mirror
-omirr 808/udp omirrd # online mirror
-rmtcfg 1236/tcp # Gracilis Packeten remote config server
-xtel 1313/tcp # french minitel
-coda_opcons 1355/udp # Coda opcons (Coda fs)
-coda_venus 1363/udp # Coda venus (Coda fs)
-coda_auth 1357/udp # Coda auth (Coda fs)
-coda_udpsrv 1359/udp # Coda udpsrv (Coda fs)
-coda_filesrv 1361/udp # Coda filesrv (Coda fs)
-codacon 1423/tcp venus.cmu # Coda Console (Coda fs)
-coda_aux1 1431/tcp # coda auxiliary service (Coda fs)
-coda_aux1 1431/udp # coda auxiliary service (Coda fs)
-coda_aux2 1433/tcp # coda auxiliary service (Coda fs)
-coda_aux2 1433/udp # coda auxiliary service (Coda fs)
-coda_aux3 1435/tcp # coda auxiliary service (Coda fs)
-coda_aux3 1435/udp # coda auxiliary service (Coda fs)
-cfinger 2003/tcp # GNU Finger
-afbackup 2988/tcp # Afbackup system
-afbackup 2988/udp # Afbackup system
-icp 3130/tcp # Internet Cache Protocol (Squid)
-icp 3130/udp # Internet Cache Protocol (Squid)
-postgres 5432/tcp # POSTGRES
-postgres 5432/udp # POSTGRES
-fax 4557/tcp # FAX transmission service (old)
-hylafax 4559/tcp # HylaFAX client-server protocol (new)
-noclog 5354/tcp # noclogd with TCP (nocol)
-noclog 5354/udp # noclogd with UDP (nocol)
-hostmon 5355/tcp # hostmon uses TCP (nocol)
-hostmon 5355/udp # hostmon uses TCP (nocol)
-ircd 6667/tcp # Internet Relay Chat
-ircd 6667/udp # Internet Relay Chat
-webcache 8080/tcp # WWW caching service
-webcache 8080/udp # WWW caching service
-tproxy 8081/tcp # Transparent Proxy
-tproxy 8081/udp # Transparent Proxy
-mandelspawn 9359/udp mandelbrot # network mandelbrot
-amanda 10080/udp # amanda backup services
-amandaidx 10082/tcp # amanda backup services
-amidxtape 10083/tcp # amanda backup services
-isdnlog 20011/tcp # isdn logging system
-isdnlog 20011/udp # isdn logging system
-vboxd 20012/tcp # voice box system
-vboxd 20012/udp # voice box system
-binkp 24554/tcp # Binkley
-binkp 24554/udp # Binkley
-asp 27374/tcp # Address Search Protocol
-asp 27374/udp # Address Search Protocol
-tfido 60177/tcp # Ifmail
-tfido 60177/udp # Ifmail
-fido 60179/tcp # Ifmail
-fido 60179/udp # Ifmail
-
-# Local services
-
diff --git a/target/device/Atmel/root/target_skeleton/etc/shadow b/target/device/Atmel/root/target_skeleton/etc/shadow
deleted file mode 100644
index 4941a1ac5..000000000
--- a/target/device/Atmel/root/target_skeleton/etc/shadow
+++ /dev/null
@@ -1,12 +0,0 @@
-root::10933:0:99999:7:::
-bin:*:10933:0:99999:7:::
-daemon:*:10933:0:99999:7:::
-adm:*:10933:0:99999:7:::
-lp:*:10933:0:99999:7:::
-sync:*:10933:0:99999:7:::
-shutdown:*:10933:0:99999:7:::
-halt:*:10933:0:99999:7:::
-uucp:*:10933:0:99999:7:::
-operator:*:10933:0:99999:7:::
-nobody:*:10933:0:99999:7:::
-default::10933:0:99999:7:::
diff --git a/target/device/Atmel/root/target_skeleton/home/.empty b/target/device/Atmel/root/target_skeleton/home/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/home/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/lib/.empty b/target/device/Atmel/root/target_skeleton/lib/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/lib/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/mnt/.empty b/target/device/Atmel/root/target_skeleton/mnt/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/mnt/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/opt/.empty b/target/device/Atmel/root/target_skeleton/opt/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/opt/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/proc/.empty b/target/device/Atmel/root/target_skeleton/proc/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/proc/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/root/.bash_history b/target/device/Atmel/root/target_skeleton/root/.bash_history
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/root/.bash_history
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/root/.bash_logout b/target/device/Atmel/root/target_skeleton/root/.bash_logout
deleted file mode 100644
index 77ef1f950..000000000
--- a/target/device/Atmel/root/target_skeleton/root/.bash_logout
+++ /dev/null
@@ -1,7 +0,0 @@
-# ~/.bash_logout: executed by bash(1) when login shell exits.
-
-# when leaving the console clear the screen to increase privacy
-
-case "`tty`" in
- /dev/tty[0-9]*) clear
-esac
diff --git a/target/device/Atmel/root/target_skeleton/root/.bash_profile b/target/device/Atmel/root/target_skeleton/root/.bash_profile
deleted file mode 100644
index 27bf14953..000000000
--- a/target/device/Atmel/root/target_skeleton/root/.bash_profile
+++ /dev/null
@@ -1,15 +0,0 @@
-# .bash_profile
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-umask 022
-
-if [ -f ~/.bashrc ]; then
- source ~/.bashrc
-fi
diff --git a/target/device/Atmel/root/target_skeleton/root/.bashrc b/target/device/Atmel/root/target_skeleton/root/.bashrc
deleted file mode 100644
index d13c8f902..000000000
--- a/target/device/Atmel/root/target_skeleton/root/.bashrc
+++ /dev/null
@@ -1,48 +0,0 @@
-# ~/.bashrc: executed by bash(1) for non-login interactive shells.
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-# If running interactively, then:
-if [ "$PS1" ]; then
-
- if [ "$BASH" ]; then
- export PS1="[\u@\h \W]\\$ "
- else
- if [ "`id -u`" -eq 0 ]; then
- export PS1='# '
- else
- export PS1='$ '
- fi
- fi
-
- export USER=`id -un`
- export LOGNAME=$USER
- export HOSTNAME=`/bin/hostname`
- export HISTSIZE=1000
- export HISTFILESIZE=1000
- export PAGER='/bin/more '
- export EDITOR='/bin/vi'
- export INPUTRC=/etc/inputrc
- export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
- export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
-
- ### Some aliases
- alias ps2='ps facux '
- alias ps1='ps faxo "%U %t %p %a" '
- alias af='ps af'
- alias cls='clear'
- alias ll='/bin/ls --color=tty -laFh'
- alias ls='/bin/ls --color=tty -F'
- alias df='df -h'
- alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
- #alias bc='bc -l'
- alias minicom='minicom -c on'
- alias calc='calc -Cd '
- alias bc='calc -Cd '
-fi;
diff --git a/target/device/Atmel/root/target_skeleton/root/.empty b/target/device/Atmel/root/target_skeleton/root/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/root/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/sbin/.empty b/target/device/Atmel/root/target_skeleton/sbin/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/sbin/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/sys/.empty b/target/device/Atmel/root/target_skeleton/sys/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/sys/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/tmp/.empty b/target/device/Atmel/root/target_skeleton/tmp/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/tmp/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/usr/bin/.empty b/target/device/Atmel/root/target_skeleton/usr/bin/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/usr/bin/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/usr/include/.empty b/target/device/Atmel/root/target_skeleton/usr/include/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/usr/include/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/usr/lib/.empty b/target/device/Atmel/root/target_skeleton/usr/lib/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/usr/lib/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/usr/man/.empty b/target/device/Atmel/root/target_skeleton/usr/man/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/usr/man/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/usr/sbin/.empty b/target/device/Atmel/root/target_skeleton/usr/sbin/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/usr/sbin/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/usr/share/udhcpc/default.script b/target/device/Atmel/root/target_skeleton/usr/share/udhcpc/default.script
deleted file mode 100755
index a52a7f812..000000000
--- a/target/device/Atmel/root/target_skeleton/usr/share/udhcpc/default.script
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/bin/sh
-
-# udhcpc script edited by Tim Riker <Tim@Rikers.org>
-
-[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1
-
-RESOLV_CONF="/etc/resolv.conf"
-[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
-[ -n "$subnet" ] && NETMASK="netmask $subnet"
-
-case "$1" in
- deconfig)
- /sbin/ifconfig $interface 0.0.0.0
- ;;
-
- renew|bound)
- /sbin/ifconfig $interface $ip $BROADCAST $NETMASK
-
- if [ -n "$router" ] ; then
- echo "deleting routers"
- while route del default gw 0.0.0.0 dev $interface ; do
- :
- done
-
- for i in $router ; do
- route add default gw $i dev $interface
- done
- fi
-
- echo -n > $RESOLV_CONF
- [ -n "$domain" ] && echo search $domain >> $RESOLV_CONF
- for i in $dns ; do
- echo adding dns $i
- echo nameserver $i >> $RESOLV_CONF
- done
- ;;
-esac
-
-exit 0
diff --git a/target/device/Atmel/root/target_skeleton/usr/src/.empty b/target/device/Atmel/root/target_skeleton/usr/src/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/usr/src/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/var/cache/.empty b/target/device/Atmel/root/target_skeleton/var/cache/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/var/cache/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/var/lib/pcmcia/.empty b/target/device/Atmel/root/target_skeleton/var/lib/pcmcia/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/var/lib/pcmcia/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/var/lock/.empty b/target/device/Atmel/root/target_skeleton/var/lock/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/var/lock/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/var/log/.empty b/target/device/Atmel/root/target_skeleton/var/log/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/var/log/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/var/pcmcia/.empty b/target/device/Atmel/root/target_skeleton/var/pcmcia/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/var/pcmcia/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/var/run/.empty b/target/device/Atmel/root/target_skeleton/var/run/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/var/run/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/var/spool/.empty b/target/device/Atmel/root/target_skeleton/var/spool/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/var/spool/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/target_skeleton/var/tmp/.empty b/target/device/Atmel/root/target_skeleton/var/tmp/.empty
deleted file mode 100644
index e69de29bb..000000000
--- a/target/device/Atmel/root/target_skeleton/var/tmp/.empty
+++ /dev/null
diff --git a/target/device/Atmel/root/uClibc.config b/target/device/Atmel/root/uClibc.config
deleted file mode 100644
index aec16bf84..000000000
--- a/target/device/Atmel/root/uClibc.config
+++ /dev/null
@@ -1,167 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-# TARGET_alpha is not set
-TARGET_arm=y
-# TARGET_bfin is not set
-# TARGET_cris is not set
-# TARGET_e1 is not set
-# TARGET_frv is not set
-# TARGET_h8300 is not set
-# TARGET_i386 is not set
-# TARGET_i960 is not set
-# TARGET_m68k is not set
-# TARGET_microblaze is not set
-# TARGET_mips is not set
-# TARGET_nios is not set
-# TARGET_nios2 is not set
-# TARGET_powerpc is not set
-# TARGET_sh is not set
-# TARGET_sh64 is not set
-# TARGET_sparc is not set
-# TARGET_v850 is not set
-# TARGET_x86_64 is not set
-
-#
-# Target Architecture Features and Options
-#
-HAVE_ELF=y
-ARCH_SUPPORTS_LITTLE_ENDIAN=y
-TARGET_ARCH="arm"
-ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_GENERIC_ARM=y
-# CONFIG_ARM610 is not set
-# CONFIG_ARM710 is not set
-# CONFIG_ARM720T is not set
-# CONFIG_ARM920T is not set
-# CONFIG_ARM922T is not set
-# CONFIG_ARM926T is not set
-# CONFIG_ARM1136JF_S is not set
-# CONFIG_ARM_SA110 is not set
-# CONFIG_ARM_SA1100 is not set
-# CONFIG_ARM_XSCALE is not set
-ARCH_LITTLE_ENDIAN=y
-# ARCH_BIG_ENDIAN is not set
-# ARCH_HAS_NO_MMU is not set
-ARCH_HAS_MMU=y
-UCLIBC_HAS_FLOATS=y
-HAS_FPU=y
-DO_C99_MATH=y
-KERNEL_SOURCE="/home/ulf/projects/AT91RM9200/buildroot/toolchain_build_arm/linux"
-C_SYMBOL_PREFIX=""
-HAVE_DOT_CONFIG=y
-
-#
-# General Library Settings
-#
-# HAVE_NO_PIC is not set
-DOPIC=y
-# HAVE_NO_SHARED is not set
-HAVE_SHARED=y
-# ARCH_HAS_NO_LDSO is not set
-BUILD_UCLIBC_LDSO=y
-# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
-LDSO_LDD_SUPPORT=y
-LDSO_CACHE_SUPPORT=y
-# LDSO_PRELOAD_FILE_SUPPORT is not set
-LDSO_BASE_FILENAME="ld.so"
-# LDSO_RUNPATH is not set
-# DL_FINI_CRT_COMPAT is not set
-UCLIBC_CTOR_DTOR=y
-# HAS_NO_THREADS is not set
-UCLIBC_HAS_THREADS=y
-PTHREADS_DEBUG_SUPPORT=y
-UCLIBC_HAS_LFS=y
-# UCLIBC_STATIC_LDCONFIG is not set
-# MALLOC is not set
-# MALLOC_SIMPLE is not set
-MALLOC_STANDARD=y
-MALLOC_GLIBC_COMPAT=y
-UCLIBC_DYNAMIC_ATEXIT=y
-HAS_SHADOW=y
-# UNIX98PTY_ONLY is not set
-ASSUME_DEVPTS=y
-UCLIBC_HAS_TM_EXTENSIONS=y
-UCLIBC_HAS_TZ_CACHING=y
-UCLIBC_HAS_TZ_FILE=y
-UCLIBC_HAS_TZ_FILE_READ_MANY=y
-UCLIBC_TZ_FILE_PATH="/etc/TZ"
-
-#
-# Networking Support
-#
-UCLIBC_HAS_IPV6=y
-UCLIBC_HAS_RPC=y
-UCLIBC_HAS_FULL_RPC=y
-
-#
-# String and Stdio Support
-#
-UCLIBC_HAS_STRING_GENERIC_OPT=y
-UCLIBC_HAS_STRING_ARCH_OPT=y
-UCLIBC_HAS_CTYPE_TABLES=y
-UCLIBC_HAS_CTYPE_SIGNED=y
-# UCLIBC_HAS_CTYPE_UNSAFE is not set
-UCLIBC_HAS_CTYPE_CHECKED=y
-# UCLIBC_HAS_CTYPE_ENFORCED is not set
-UCLIBC_HAS_WCHAR=y
-# UCLIBC_HAS_LOCALE is not set
-UCLIBC_HAS_HEXADECIMAL_FLOATS=y
-UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
-UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
-UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y
-# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
-UCLIBC_HAS_STDIO_BUFSIZ_4096=y
-# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
-UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
-# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
-UCLIBC_HAS_STDIO_GETC_MACRO=y
-UCLIBC_HAS_STDIO_PUTC_MACRO=y
-UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
-# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
-UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
-UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
-UCLIBC_HAS_PRINTF_M_SPEC=y
-UCLIBC_HAS_ERRNO_MESSAGES=y
-# UCLIBC_HAS_SYS_ERRLIST is not set
-UCLIBC_HAS_SIGNUM_MESSAGES=y
-# UCLIBC_HAS_SYS_SIGLIST is not set
-UCLIBC_HAS_GNU_GETOPT=y
-
-#
-# Big and Tall
-#
-UCLIBC_HAS_REGEX=y
-# UCLIBC_HAS_WORDEXP is not set
-UCLIBC_HAS_FTW=y
-UCLIBC_HAS_GLOB=y
-
-#
-# Library Installation Options
-#
-SHARED_LIB_LOADER_PREFIX="/lib"
-RUNTIME_PREFIX="/"
-DEVEL_PREFIX="/usr/"
-
-#
-# uClibc security related options
-#
-# UCLIBC_SECURITY is not set
-
-#
-# uClibc development/debugging options
-#
-CROSS_COMPILER_PREFIX="/usr/local/arm/gcc-3.4.4-uclibc/bin/arm-linux-uclibc-"
-# DODEBUG is not set
-# DODEBUG_PT is not set
-# DOASSERTS is not set
-# SUPPORT_LD_DEBUG is not set
-# SUPPORT_LD_DEBUG_EARLY is not set
-WARNINGS="-Wall"
-# UCLIBC_MJN3_ONLY is not set