board: remove atstk1005_defconfig

Neither the kernel nor U-Boot have support for a 1005 board, so let's
get rid of this board configuration, the corresponding target
skeleton, kernel and busybox configuration and device table.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

1 files changed, 0 insertions, 287 deletions

diff --git a/target/device/Atmel/atstk1005/target_skeleton/etc/samba/smb.conf b/target/device/Atmel/atstk1005/target_skeleton/etc/samba/smb.conf
deleted file mode 100644
index a29571894..000000000
--- a/target/device/Atmel/atstk1005/target_skeleton/etc/samba/smb.conf
+++ /dev/null
@@ -1,287 +0,0 @@
-# This is the main Samba configuration file. You should read the
-# smb.conf(5) manual page in order to understand the options listed
-# here. Samba has a huge number of configurable options (perhaps too
-# many!) most of which are not shown in this example
-#
-# For a step to step guide on installing, configuring and using samba,
-# read the Samba-HOWTO-Collection. This may be obtained from:
-#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
-#
-# Many working examples of smb.conf files can be found in the
-# Samba-Guide which is generated daily and can be downloaded from:
-#  http://www.samba.org/samba/docs/Samba-Guide.pdf
-#
-# Any line which starts with a ; (semi-colon) or a # (hash)
-# is a comment and is ignored. In this example we will use a #
-# for commentry and a ; for parts of the config file that you
-# may wish to enable
-#
-# NOTE: Whenever you modify this file you should run the command "testparm"
-# to check that you have not made any basic syntactic errors.
-#
-#======================= Global Settings =====================================
-[global]
-
-# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
-   workgroup = AVR32
-
-# Network name
-   netbios name = stk1000
-
-# server string is the equivalent of the NT Description field
-   server string = AVR32 STK1000 development kit
-
-# Security mode. Defines in which mode Samba will operate. Possible
-# values are share, user, server, domain and ads. Most people will want
-# user level security. See the Samba-HOWTO-Collection for details.
-   security = user
-
-# This option is important for security. It allows you to restrict
-# connections to machines which are on your local network. The
-# following example restricts access to two C class networks and
-# the "loopback" interface. For more examples of the syntax see
-# the smb.conf man page
-   hosts allow = 10.0.0. 127.
-
-# If you want to automatically load your printer list rather
-# than setting them up individually then you'll need this
-   load printers = no
-
-# you may wish to override the location of the printcap file
-;   printcap name = /etc/printcap
-
-# on SystemV system setting printcap name to lpstat should allow
-# you to automatically obtain a printer list from the SystemV spool
-# system
-;   printcap name = lpstat
-
-# It should not be necessary to specify the print system type unless
-# it is non-standard. Currently supported print systems include:
-# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
-;   printing = cups
-
-# Uncomment this if you want a guest account, you must add this to /etc/passwd
-# otherwise the user "nobody" is used
-;  guest account = pcguest
-
-# this tells Samba to use a separate log file for each machine
-# that connects
-   log file = /var/log/samba/log.%m
-   debug level = 1
-   syslog = 0
-
-# Put a capping on the size of the log files (in Kb).
-   max log size = 1000
-
-# Use password server option only with security = server
-# The argument list may include:
-#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
-# or to auto-locate the domain controller/s
-#   password server = *
-;   password server = <NT-Server-Name>
-
-# Use the realm option only with security = ads
-# Specifies the Active Directory realm the host is part of
-;   realm = MY_REALM
-
-# Backend to store user information in. New installations should
-# use either tdbsam or ldapsam. smbpasswd is available for backwards
-# compatibility. tdbsam requires no further configuration.
-   passdb backend = smbpasswd:/etc/samba/smbpasswd
-
-# Using the following line enables you to customise your configuration
-# on a per machine basis. The %m gets replaced with the netbios name
-# of the machine that is connecting.
-# Note: Consider carefully the location in the configuration file of
-#       this line.  The included file is read at that point.
-;   include = /usr/local/samba/lib/smb.conf.%m
-
-# Configure Samba to use multiple interfaces
-# If you have multiple network interfaces then you must list them
-# here. See the man page for details.
-   interfaces = lo eth0
-
-   socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
-
-# Browser Control Options:
-# set local master to no if you don't want Samba to become a master
-# browser on your network. Otherwise the normal election rules apply
-   local master = yes
-
-# OS Level determines the precedence of this server in master browser
-# elections. The default value should be reasonable
-   os level = 254
-
-# Domain Master specifies Samba to be the Domain Master Browser. This
-# allows Samba to collate browse lists between subnets. Don't use this
-# if you already have a Windows NT domain controller doing this job
-   domain master = yes
-
-# Preferred Master causes Samba to force a local browser election on startup
-# and gives it a slightly higher chance of winning the election
-   preferred master = yes
-
-# Enable this if you want Samba to be a domain logon server for
-# Windows95 workstations.
-;   domain logons = yes
-
-# if you enable domain logons then you may want a per-machine or
-# per user logon script
-# run a specific logon batch file per workstation (machine)
-;   logon script = %m.bat
-# run a specific logon batch file per username
-;   logon script = %U.bat
-
-# Where to store roving profiles (only for Win95 and WinNT)
-#        %L substitutes for this servers netbios name, %U is username
-#        You must uncomment the [Profiles] share below
-;   logon path = \\%L\Profiles\%U
-
-# Windows Internet Name Serving Support Section:
-# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
-;   wins support = yes
-
-# WINS Server - Tells the NMBD components of Samba to be a WINS Client
-#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
-;   wins server = w.x.y.z
-
-# WINS Proxy - Tells Samba to answer name resolution queries on
-# behalf of a non WINS capable client, for this to work there must be
-# at least one	WINS Server on the network. The default is NO.
-;   wins proxy = yes
-
-# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
-# via DNS nslookups. The default is NO.
-   dns proxy = no
-
-# These scripts are used on a domain controller or stand-alone
-# machine to add or delete corresponding unix accounts
-;  add user script = /usr/sbin/useradd %u
-;  add group script = /usr/sbin/groupadd %g
-;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
-;  delete user script = /usr/sbin/userdel %u
-;  delete user from group script = /usr/sbin/deluser %u %g
-;  delete group script = /usr/sbin/groupdel %g
-
-# Unix charset on the filesystem
-   unix charset = iso8859-1
-
-# Code page for the client
-#   client code page = 850
-
-#============================ Share Definitions ==============================
-[homes]
-   comment = Home Directories
-   browseable = no
-   writable = yes
-
-[netdisk]
-   comment = Network share on STK1000
-   path = /media
-   read only = no
-   public = yes
-
-# Un-comment the following and create the netlogon directory for Domain Logons
-; [netlogon]
-;   comment = Network Logon Service
-;   path = /usr/local/samba/lib/netlogon
-;   guest ok = yes
-;   writable = no
-;   share modes = no
-
-
-# Un-comment the following to provide a specific roving profile share
-# the default is to use the user's home directory
-;[Profiles]
-;    path = /usr/local/samba/profiles
-;    browseable = no
-;    guest ok = yes
-
-
-# NOTE: If you have a BSD-style print system there is no need to
-# specifically define each individual printer
-;[printers]
-;   comment = All Printers
-;   path = /usr/spool/samba
-;   browseable = no
-# Set public = yes to allow user 'guest account' to print
-;   guest ok = no
-;   writable = no
-;   printable = yes
-
-# This one is useful for people to share files
-;[tmp]
-;   comment = Temporary file space
-;   path = /tmp
-;   read only = no
-;   public = yes
-
-# A publicly accessible directory, but read only, except for people in
-# the "staff" group
-;[public]
-;   comment = Public Stuff
-;   path = /home/samba
-;   public = yes
-;   writable = yes
-;   printable = no
-;   write list = @staff
-
-# Other examples.
-#
-# A private printer, usable only by fred. Spool data will be placed in fred's
-# home directory. Note that fred must have write access to the spool directory,
-# wherever it is.
-;[fredsprn]
-;   comment = Fred's Printer
-;   valid users = fred
-;   path = /homes/fred
-;   printer = freds_printer
-;   public = no
-;   writable = no
-;   printable = yes
-
-# A private directory, usable only by fred. Note that fred requires write
-# access to the directory.
-;[fredsdir]
-;   comment = Fred's Service
-;   path = /usr/somewhere/private
-;   valid users = fred
-;   public = no
-;   writable = yes
-;   printable = no
-
-# a service which has a different directory for each machine that connects
-# this allows you to tailor configurations to incoming machines. You could
-# also use the %U option to tailor it by user name.
-# The %m gets replaced with the machine name that is connecting.
-;[pchome]
-;  comment = PC Directories
-;  path = /usr/pc/%m
-;  public = no
-;  writable = yes
-
-# A publicly accessible directory, read/write to all users. Note that all files
-# created in the directory by users will be owned by the default user, so
-# any user with access can delete any other user's files. Obviously this
-# directory must be writable by the default user. Another user could of course
-# be specified, in which case all files would be owned by that user instead.
-;[public]
-;   path = /usr/somewhere/else/public
-;   public = yes
-;   only guest = yes
-;   writable = yes
-;   printable = no
-
-# The following two entries demonstrate how to share a directory so that two
-# users can place files there that will be owned by the specific users. In this
-# setup, the directory should be writable by both users and should have the
-# sticky bit set on it to prevent abuse. Obviously this could be extended to
-# as many users as required.
-;[myshare]
-;   comment = Mary's and Fred's stuff
-;   path = /usr/somewhere/shared
-;   valid users = mary fred
-;   public = no
-;   writable = yes
-;   printable = no
-;   create mask = 0765