diff options
Diffstat (limited to 'target/device/Atmel/u-boot')
| -rw-r--r-- | target/device/Atmel/u-boot/Config.in | 115 | ||||
| -rw-r--r-- | target/device/Atmel/u-boot/u-boot-1.3.0-100-atmel.2.patch.bad (renamed from target/device/Atmel/u-boot/u-boot-1.3.0-100-atmel.2.patch) | 0 | ||||
| -rw-r--r-- | target/device/Atmel/u-boot/u-boot-1.3.0.mk.bad | 149 | ||||
| -rw-r--r-- | target/device/Atmel/u-boot/u-boot.mk | 367 |
4 files changed, 427 insertions, 204 deletions
diff --git a/target/device/Atmel/u-boot/Config.in b/target/device/Atmel/u-boot/Config.in index edefb52bb..62988ebe4 100644 --- a/target/device/Atmel/u-boot/Config.in +++ b/target/device/Atmel/u-boot/Config.in @@ -1,103 +1,44 @@ -config BR2_TARGET_U_BOOT - bool "u-boot" +config BR2_TARGET_UBOOT + bool "Das U-Boot Boot Monitor" + depends on BR2_TARGET_AT91 + depends on !BR2_TARGET_AT91SAM9260PF default n - depends on BR2_avr32 || BR2_arm || BR2_armeb || BR2_i386 || BR2_powerpc || BR2_m68k || BR2_mips || BR2_nios2 help - U-Boot, the universal boot loader for multiple platforms and target - boards. + Build "Das U-Boot" Boot Monitor - http://www.denx.de/wiki/UBoot/ - -config BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE - string "U-Boot config header file" - depends on BR2_TARGET_U_BOOT - help - Set this variable to a file containing a U-Boot configuration for the - target board. This file will be copied into the U-Boot directory - include/configs. - -config BR2_TARGET_U_BOOT_CONFIG_BOARD - string "U-Boot target board configuration" - depends on BR2_TARGET_U_BOOT +config BR2_TARGET_UBOOT_SERVERIP + string "server ip" + depends on BR2_TARGET_UBOOT + default "10.175.196.221" help - Set this variable to the target board you want to configure U-Boot - for. This will use the default options for this board in U-Boot and - build accordingly. - - For example "atstk1002_config" for ATSTK1000 with ATSTK1002 top - module for the AVR32 starter kit. + TFTP server ip address -config BR2_TARGET_U_BOOT_SERVERIP - string "Server IP" - depends on BR2_TARGET_U_BOOT - default "192.168.0.1" +config BR2_TARGET_UBOOT_IPADDR + string "ip address" + depends on BR2_TARGET_UBOOT + default "10.175.196.18" help - The IP address for the remote server providing TFTP services. + TFTP server ip address -config BR2_TARGET_U_BOOT_IPADDR - string "Target IP address" - depends on BR2_TARGET_U_BOOT - default "192.168.0.42" +config BR2_TARGET_UBOOT_GATEWAY + string "gateway ip" + depends on BR2_TARGET_UBOOT + default "10.175.196.1" help - Target board IP address, only set this if you intend to use a fixed - address (i.e. no DHCP). A blanc target IP address will allow the - board to use DHCP. + Gateway ip address -config BR2_TARGET_U_BOOT_GATEWAY - string "Gateway IP" - depends on BR2_TARGET_U_BOOT && BR2_TARGET_U_BOOT_IPADDR != "" - default "192.168.0.1" - help - Set the gateway IP address if you need to connect to a machine - outside the netmask for the network. - -config BR2_TARGET_U_BOOT_NETMASK +config BR2_TARGET_UBOOT_NETMASK string "netmask" - depends on BR2_TARGET_U_BOOT && BR2_TARGET_U_BOOT_IPADDR != "" + depends on BR2_TARGET_UBOOT default "255.255.255.0" help - Network mask for the target board network. - -config BR2_TARGET_U_BOOT_ETH0ADDR - string "Ethernet 0 address" - depends on BR2_TARGET_U_BOOT - help - Target board MAC address for interface 0. You should have a MAC - address range provided by the company who made you MAC hardware. - -config BR2_TARGET_U_BOOT_ETH1ADDR - string "Ethernet 1 address" - depends on BR2_TARGET_U_BOOT - help - Target board MAC address for interface 1. You should have a MAC - address range provided by the company who made you MAC hardware. - -config BR2_TARGET_U_BOOT_BOOTARGS - string "Boot arguments" - depends on BR2_TARGET_U_BOOT - default "console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2" - help - Set the boot arguments in U-Boot to let it boot the way you prefer by - default. Typoes here will result in a non-booting target board. - - Example booting from MMC/SD-card: - console=ttyS0 root=/dev/mmcblk0p1 - - Example booting from flash devices (NOR, NAND, DataFlash, etc): - console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2 + Network Mask -config BR2_TARGET_U_BOOT_BOOTCMD - string "Boot command" - depends on BR2_TARGET_U_BOOT - default "fsload /boot/$(LINUX26_FORMAT); bootm" +config BR2_TARGET_UBOOT_ETHADDR + string "Ethernet address" + depends on BR2_TARGET_UBOOT + default "04:25:fe:ed:00:18" help - Set the boot command in U-Boot which specifies how U-Boot should load - your kernel image, or if you want to do other commands automatically - when U-Boot starts. + Target ip address, this should be changed for production units - Loading a kernel from MMC/SD-card: - mmcinit; ext2load mmc 0:1 <RAM address> - /boot/$(BR2_PACKAGE_LINUX_FORMAT); bootm - Loading a kernel from flash devices (NOR, NAND, DataFlash, etc): - fsload <RAM address> /boot/$(BR2_PACKAGE_LINUX_FORMAT); bootm diff --git a/target/device/Atmel/u-boot/u-boot-1.3.0-100-atmel.2.patch b/target/device/Atmel/u-boot/u-boot-1.3.0-100-atmel.2.patch.bad index a6d484b2d..a6d484b2d 100644 --- a/target/device/Atmel/u-boot/u-boot-1.3.0-100-atmel.2.patch +++ b/target/device/Atmel/u-boot/u-boot-1.3.0-100-atmel.2.patch.bad diff --git a/target/device/Atmel/u-boot/u-boot-1.3.0.mk.bad b/target/device/Atmel/u-boot/u-boot-1.3.0.mk.bad new file mode 100644 index 000000000..59ba37cd9 --- /dev/null +++ b/target/device/Atmel/u-boot/u-boot-1.3.0.mk.bad @@ -0,0 +1,149 @@ +############################################################# +# +# U-Boot +# +############################################################# +U_BOOT_VERSION:=1.3.0 +U_BOOT_SOURCE:=u-boot-$(U_BOOT_VERSION).tar.bz2 +U_BOOT_SITE:=ftp://ftp.denx.de/pub/u-boot +U_BOOT_DIR:=$(PROJECT_BUILD_DIR)/u-boot-$(U_BOOT_VERSION) +U_BOOT_CAT:=$(BZCAT) +U_BOOT_BIN:=u-boot.bin +U_BOOT_TOOLS_BIN:=mkimage + +U_BOOT_INC_CONF_FILE:=$(U_BOOT_DIR)/include/configs/$(subst _config,,$(BR2_TARGET_U_BOOT_CONFIG_BOARD)).h + +$(DL_DIR)/$(U_BOOT_SOURCE): + $(WGET) -P $(DL_DIR) $(U_BOOT_SITE)/$(U_BOOT_SOURCE) + +$(U_BOOT_DIR)/.unpacked: $(DL_DIR)/$(U_BOOT_SOURCE) + $(U_BOOT_CAT) $(DL_DIR)/$(U_BOOT_SOURCE) \ + | tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) - + toolchain/patch-kernel.sh $(U_BOOT_DIR) target/device/Atmel/u-boot/ \ + u-boot-$(U_BOOT_VERSION)-\*.patch\* + touch $@ + +$(U_BOOT_DIR)/.header_copied: $(U_BOOT_DIR)/.unpacked +ifneq ($(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE),"") + @if [ ! -f "$(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)" ]; then \ + echo " You specified BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE,"; \ + echo " but the file at:"; \ + echo " '$(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)'"; \ + echo " does not exist."; \ + echo; \ + echo " Configure the BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE variable."; \ + echo; \ + exit 1; \ + fi + cp -dpf $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE) $(U_BOOT_INC_CONF_FILE) +endif + touch $@ + +$(U_BOOT_DIR)/.configured: $(U_BOOT_DIR)/.header_copied +ifeq ($(strip $(BR2_TARGET_U_BOOT_CONFIG_BOARD)),"") + @echo + @echo " You did not specify a target u-boot config board, so u-boot" + @echo " has no way of knowing which board you want to build your" + @echo " bootloader for." + @echo + @echo " Configure the BR2_TARGET_U_BOOT_CONFIG_BOARD variable." + @echo + @exit 1 +endif + $(TARGET_CONFIGURE_OPTS) \ + CFLAGS="$(TARGET_CFLAGS)" \ + LDFLAGS="$(TARGET_LDFLAGS)" \ + $(MAKE) -C $(U_BOOT_DIR) \ + $(BR2_TARGET_U_BOOT_CONFIG_BOARD) + touch $@ + +$(U_BOOT_DIR)/.header_modified: $(U_BOOT_DIR)/.configured + # Modify configuration header in $(U_BOOT_INC_CONF_FILE) + @echo >> $(U_BOOT_INC_CONF_FILE) + @echo "/* Add a wrapper around the values Buildroot sets. */" >> $(U_BOOT_INC_CONF_FILE) + @echo "#ifndef __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE) + @echo "#define __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE) +ifneq ($(strip $(BR2_PROJECT)),"") + @echo "#define CONFIG_HOSTNAME" >> $(U_BOOT_INC_CONF_FILE) + $(SED) 's,^#define.*CONFIG_HOSTNAME.*,#define CONFIG_HOSTNAME $(subst ",,$(BR2_PROJECT)),' $(U_BOOT_INC_CONF_FILE) +endif +ifneq ($(strip $(BR2_TARGET_U_BOOT_SERVERIP)),"") + @echo "#define CONFIG_SERVERIP" >> $(U_BOOT_INC_CONF_FILE) + $(SED) 's,^#define.*CONFIG_SERVERIP.*,#define CONFIG_SERVERIP $(subst ",,$(BR2_TARGET_U_BOOT_SERVERIP)),' $(U_BOOT_INC_CONF_FILE) +endif +ifneq ($(strip $(BR2_TARGET_U_BOOT_IPADDR)),"") + @echo "#define CONFIG_IPADDR" >> $(U_BOOT_INC_CONF_FILE) + $(SED) 's,^#define.*CONFIG_IPADDR.*,#define CONFIG_IPADDR $(subst ",,$(BR2_TARGET_U_BOOT_IPADDR)),' $(U_BOOT_INC_CONF_FILE) +ifneq ($(strip $(BR2_TARGET_U_BOOT_GATEWAY)),"") + @echo "#define CONFIG_GATEWAYIP" >> $(U_BOOT_INC_CONF_FILE) + $(SED) 's,^#define.*CONFIG_GATEWAYIP.*,#define CONFIG_GATEWAYIP $(subst ",,$(BR2_TARGET_U_BOOT_GATEWAY)),' $(U_BOOT_INC_CONF_FILE) +endif +ifneq ($(strip $(BR2_TARGET_U_BOOT_NETMASK)),"") + @echo "#define CONFIG_NETMASK" >> $(U_BOOT_INC_CONF_FILE) + $(SED) 's,^#define.*CONFIG_NETMASK.*,#define CONFIG_NETMASK $(subst ",,$(BR2_TARGET_U_BOOT_NETMASK)),' $(U_BOOT_INC_CONF_FILE) +endif +endif # end BR2_TARGET_U_BOOT_IPADDR +ifneq ($(strip $(BR2_TARGET_U_BOOT_ETH0ADDR)),"") + @echo "#define CONFIG_ETHADDR" >> $(U_BOOT_INC_CONF_FILE) + $(SED) 's,^#define.*CONFIG_ETHADDR.*,#define CONFIG_ETHADDR $(subst ",,$(BR2_TARGET_U_BOOT_ETH0ADDR)),' $(U_BOOT_INC_CONF_FILE) +endif +ifneq ($(strip $(BR2_TARGET_U_BOOT_ETH1ADDR)),"") + @echo "#define CONFIG_ETH1ADDR" >> $(U_BOOT_INC_CONF_FILE) + $(SED) 's,^#define.*CONFIG_ETH1ADDR.*,#define CONFIG_ETH1ADDR $(subst ",,$(BR2_TARGET_U_BOOT_ETH1ADDR)),' $(U_BOOT_INC_CONF_FILE) +endif +ifneq ($(strip $(BR2_TARGET_U_BOOT_BOOTARGS)),"") + @echo "#undef CONFIG_BOOTARGS" >> $(U_BOOT_INC_CONF_FILE) + @echo '#define CONFIG_BOOTARGS $(BR2_TARGET_U_BOOT_BOOTARGS)' >> $(U_BOOT_INC_CONF_FILE) +endif +ifneq ($(strip $(BR2_TARGET_U_BOOT_BOOTCMD)),"") + @echo "#undef CONFIG_BOOTCOMMAND" >> $(U_BOOT_INC_CONF_FILE) + @echo '#define CONFIG_BOOTCOMMAND $(BR2_TARGET_U_BOOT_BOOTCMD)' >> $(U_BOOT_INC_CONF_FILE) +endif + @echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(U_BOOT_INC_CONF_FILE) + touch $@ + +$(U_BOOT_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/.header_modified + $(TARGET_CONFIGURE_OPTS) \ + CFLAGS="$(TARGET_CFLAGS)" \ + LDFLAGS="$(TARGET_LDFLAGS)" \ + $(MAKE) -C $(U_BOOT_DIR) + +$(BINARIES_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/$(U_BOOT_BIN) + cp -dpf $(U_BOOT_DIR)/$(U_BOOT_BIN) $(BINARIES_DIR) + cp -dpf $(U_BOOT_DIR)/tools/$(U_BOOT_TOOLS_BIN) $(STAGING_DIR)/usr/bin/ + +u-boot: gcc $(BINARIES_DIR)/$(U_BOOT_BIN) + +u-boot-clean: + $(MAKE) -C $(U_BOOT_DIR) clean + +u-boot-dirclean: + rm -rf $(U_BOOT_DIR) + +u-boot-source: $(DL_DIR)/$(U_BOOT_SOURCE) + +############################################################# +# +# Toplevel Makefile options +# +############################################################# +ifeq ($(strip $(BR2_TARGET_U_BOOT)),y) +TARGETS+=u-boot +endif + +u-boot-status: + @echo + @echo U_BOOT_INC_CONF_FILE = $(U_BOOT_INC_CONF_FILE) + @echo + @echo BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE = $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE) + @echo BR2_TARGET_U_BOOT_CONFIG_BOARD = $(BR2_TARGET_U_BOOT_CONFIG_BOARD) + @echo BR2_TARGET_U_BOOT_SERVERIP = $(BR2_TARGET_U_BOOT_SERVERIP) + @echo BR2_TARGET_U_BOOT_IPADDR = $(BR2_TARGET_U_BOOT_IPADDR) + @echo BR2_TARGET_U_BOOT_GATEWAY = $(BR2_TARGET_U_BOOT_GATEWAY) + @echo BR2_TARGET_U_BOOT_NETMASK = $(BR2_TARGET_U_BOOT_NETMASK) + @echo BR2_TARGET_U_BOOT_ETH0ADDR = $(BR2_TARGET_U_BOOT_ETH0ADDR) + @echo BR2_TARGET_U_BOOT_ETH1ADDR = $(BR2_TARGET_U_BOOT_ETH1ADDR) + @echo BR2_TARGET_U_BOOT_BOOTARGS = $(BR2_TARGET_U_BOOT_BOOTARGS) + @echo BR2_TARGET_U_BOOT_BOOTCMD = $(BR2_TARGET_U_BOOT_BOOTCMD) + @echo + @exit 0 diff --git a/target/device/Atmel/u-boot/u-boot.mk b/target/device/Atmel/u-boot/u-boot.mk index 59ba37cd9..474359e19 100644 --- a/target/device/Atmel/u-boot/u-boot.mk +++ b/target/device/Atmel/u-boot/u-boot.mk @@ -1,149 +1,282 @@ ############################################################# # -# U-Boot +# u-boot mkimage to build to target u-boot filesystems and +# +# u-boot.bin - the boot loader for the target - which needs soft float, so +# we won't make it. +# # ############################################################# -U_BOOT_VERSION:=1.3.0 -U_BOOT_SOURCE:=u-boot-$(U_BOOT_VERSION).tar.bz2 -U_BOOT_SITE:=ftp://ftp.denx.de/pub/u-boot -U_BOOT_DIR:=$(PROJECT_BUILD_DIR)/u-boot-$(U_BOOT_VERSION) -U_BOOT_CAT:=$(BZCAT) -U_BOOT_BIN:=u-boot.bin -U_BOOT_TOOLS_BIN:=mkimage - -U_BOOT_INC_CONF_FILE:=$(U_BOOT_DIR)/include/configs/$(subst _config,,$(BR2_TARGET_U_BOOT_CONFIG_BOARD)).h - -$(DL_DIR)/$(U_BOOT_SOURCE): - $(WGET) -P $(DL_DIR) $(U_BOOT_SITE)/$(U_BOOT_SOURCE) - -$(U_BOOT_DIR)/.unpacked: $(DL_DIR)/$(U_BOOT_SOURCE) - $(U_BOOT_CAT) $(DL_DIR)/$(U_BOOT_SOURCE) \ - | tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) - - toolchain/patch-kernel.sh $(U_BOOT_DIR) target/device/Atmel/u-boot/ \ - u-boot-$(U_BOOT_VERSION)-\*.patch\* +UBOOT_VERSION:=1.2.0-atmel +ATMEL_MIRROR:=$(strip $(subst ",, $(BR2_ATMEL_MIRROR))) +#")) +UBOOT_DIR:=$(BUILD_DIR)/u-boot-$(UBOOT_VERSION) +UBOOT_BUILD_DIR:=$(PROJECT_BUILD_DIR)/u-boot-$(UBOOT_VERSION) +UBOOT_SOURCE:=u-boot-$(UBOOT_VERSION).tar.bz2 +#UBOOT_SOURCE:=u-boot-1.1.5-atmel.tar.bz2 +#UBOOT_SITE:=http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/u-boot +UBOOT_SITE:=$(ATMEL_MIRROR) +UBOOT_PATCH_SITE:=$(ATMEL_MIRROR) +UBOOT_CAT:=$(BZCAT) +UBOOT_PATCH_SOURCE:=u-boot-1.2.0-atmel-patch.tar.bz2 + +MKIMAGE_BINLOC:=$(UBOOT_BUILD_DIR)/tools/mkimage +MKIMAGE:=$(KERNEL_CROSS)mkimage + +UBOOT_BIN:=$(BOARD_NAME)-u-boot-$(UBOOT_VERSION)-$(DATE).bin + +UBOOT_PATCHES:=$(PROJECT_BUILD_DIR)/u-boot-patches + +UBOOT_ATMEL_BMP:=$(UBOOT_PATCHES)/atmel.bmp + +UBOOT_SCR=$(BINARIES_DIR)/autoscript +TARGET_UBOOT_IPADDR:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_IPADDR))) +#")) +TARGET_UBOOT_SERVERIP:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_SERVERIP))) +#")) +TARGET_UBOOT_GATEWAY:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_GATEWAY))) +#")) +TARGET_UBOOT_NETMASK:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_NETMASK))) +#")) +TARGET_UBOOT_ETHADDR:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_ETHADDR))) +#")) +UBOOT_CUSTOM:=$(UBOOT_DIR)/include/custom.h + +$(DL_DIR)/$(UBOOT_SOURCE): + $(WGET) -P $(DL_DIR) $(UBOOT_SITE)/$(UBOOT_SOURCE) + +$(DL_DIR)/$(UBOOT_PATCH_SOURCE): + $(WGET) -P $(DL_DIR) $(UBOOT_PATCH_SITE)/$(UBOOT_PATCH_SOURCE) + +$(UBOOT_DIR)/.unpacked: $(DL_DIR)/$(UBOOT_SOURCE) + mkdir -p $(BUILD_DIR) + $(UBOOT_CAT) $(DL_DIR)/$(UBOOT_SOURCE) | tar -C $(BUILD_DIR) -xvf - touch $@ -$(U_BOOT_DIR)/.header_copied: $(U_BOOT_DIR)/.unpacked -ifneq ($(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE),"") - @if [ ! -f "$(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)" ]; then \ - echo " You specified BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE,"; \ - echo " but the file at:"; \ - echo " '$(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)'"; \ - echo " does not exist."; \ - echo; \ - echo " Configure the BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE variable."; \ - echo; \ - exit 1; \ - fi - cp -dpf $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE) $(U_BOOT_INC_CONF_FILE) -endif +$(UBOOT_PATCHES)/.unpacked: $(DL_DIR)/$(UBOOT_PATCH_SOURCE) + mkdir -p $(UBOOT_PATCHES) + bzcat $(DL_DIR)/$(UBOOT_PATCH_SOURCE) | tar -C $(UBOOT_PATCHES) -xvf - touch $@ -$(U_BOOT_DIR)/.configured: $(U_BOOT_DIR)/.header_copied -ifeq ($(strip $(BR2_TARGET_U_BOOT_CONFIG_BOARD)),"") - @echo - @echo " You did not specify a target u-boot config board, so u-boot" - @echo " has no way of knowing which board you want to build your" - @echo " bootloader for." - @echo - @echo " Configure the BR2_TARGET_U_BOOT_CONFIG_BOARD variable." - @echo - @exit 1 +$(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE): $(UBOOT_DIR)/.unpacked $(UBOOT_PATCHES)/.unpacked + toolchain/patch-kernel.sh $(UBOOT_DIR) $(UBOOT_PATCHES) \*.patch + touch $(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE) +# cp $(UBOOT_CONFIG_FILE) $(UBOOT_DIR)/include/configs/. +# cp $(UBOOT_PATCHES)/cmd_defenv.c $(UBOOT_DIR)/common/. +# cp $(UBOOT_ATMEL_BMP) $(UBOOT_DIR)/tools/logos/. + +$(UBOOT_BUILD_DIR)/.configured: $(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE) +ifneq ($(strip $(UBOOT_CONFIG_FILE)),) + cp $(UBOOT_CONFIG_FILE) $(UBOOT_DIR)/include/configs/. endif - $(TARGET_CONFIGURE_OPTS) \ - CFLAGS="$(TARGET_CFLAGS)" \ - LDFLAGS="$(TARGET_LDFLAGS)" \ - $(MAKE) -C $(U_BOOT_DIR) \ - $(BR2_TARGET_U_BOOT_CONFIG_BOARD) - touch $@ + $(MAKE) \ + O=$(UBOOT_BUILD_DIR) \ + CONFIG_NOSOFTFLOAT=1 \ + -C $(UBOOT_DIR) \ + $(UBOOT_CONFIG) + $(SED) 's/ $$(SREC) $$(BIN)//' $(UBOOT_DIR)/examples/Makefile + touch $(UBOOT_BUILD_DIR)/.configured +# $(MAKE) O=$(UBOOT_BUILD_DIR) -C $(UBOOT_DIR) + +$(MKIMAGE_BINLOC): $(UBOOT_BUILD_DIR)/.configured + $(MAKE) \ + O=$(UBOOT_BUILD_DIR) \ + CROSS_COMPILE= \ + CONFIG_NOSOFTFLOAT=1 \ + TOPDIR=$(UBOOT_DIR) \ + SRCTREE=$(UBOOT_DIR) \ + -C $(UBOOT_DIR) tools + touch $(MKIMAGE_BINLOC) + +$(UBOOT_BUILD_DIR)/u-boot.bin: $(UBOOT_BUILD_DIR)/.configured $(UBOOT_CUSTOM) + echo TARGET_CROSS=$(TARGET_CROSS) + $(MAKE) O=$(UBOOT_BUILD_DIR) \ + CROSS_COMPILE=$(TARGET_CROSS) \ + CONFIG_NOSOFTFLOAT=1 \ + TOPDIR=$(UBOOT_DIR) \ + SRCTREE=$(UBOOT_DIR) \ + TFTPBOOT=/tftpboot \ + -C $(UBOOT_DIR) + +$(BINARIES_DIR)/$(UBOOT_BIN): $(UBOOT_BUILD_DIR)/u-boot.bin + mkdir -p $(BINARIES_DIR) + cp $(UBOOT_BUILD_DIR)/u-boot.bin $(BINARIES_DIR)/$(UBOOT_BIN) + +/tftpboot/$(UBOOT_BIN): $(UBOOT_BUILD_DIR)/u-boot.bin + mkdir -p /tftpboot + cp $(UBOOT_BUILD_DIR)/u-boot.bin /tftpboot/$(UBOOT_BIN) -$(U_BOOT_DIR)/.header_modified: $(U_BOOT_DIR)/.configured - # Modify configuration header in $(U_BOOT_INC_CONF_FILE) - @echo >> $(U_BOOT_INC_CONF_FILE) - @echo "/* Add a wrapper around the values Buildroot sets. */" >> $(U_BOOT_INC_CONF_FILE) - @echo "#ifndef __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE) - @echo "#define __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE) -ifneq ($(strip $(BR2_PROJECT)),"") - @echo "#define CONFIG_HOSTNAME" >> $(U_BOOT_INC_CONF_FILE) - $(SED) 's,^#define.*CONFIG_HOSTNAME.*,#define CONFIG_HOSTNAME $(subst ",,$(BR2_PROJECT)),' $(U_BOOT_INC_CONF_FILE) +uboot-bin: $(BINARIES_DIR)/$(UBOOT_BIN) /tftpboot/$(UBOOT_BIN) + +$(UBOOT_CUSTOM).test: .config $(UBOOT_BUILD_DIR)/.configured + echo "/* Automatically generated file, do not edit */" \ + > $(UBOOT_CUSTOM).test +ifneq ($(TARGET_HOSTNAME),) + echo "#if defined(CONFIG_HOSTNAME)" >> $(UBOOT_CUSTOM).test + echo "#undef CONFIG_HOSTNAME" >> $(UBOOT_CUSTOM).test + echo "#define CONFIG_HOSTNAME $(TARGET_HOSTNAME)">> $(UBOOT_CUSTOM).test + echo "#endif" >> $(UBOOT_CUSTOM).test endif -ifneq ($(strip $(BR2_TARGET_U_BOOT_SERVERIP)),"") - @echo "#define CONFIG_SERVERIP" >> $(U_BOOT_INC_CONF_FILE) - $(SED) 's,^#define.*CONFIG_SERVERIP.*,#define CONFIG_SERVERIP $(subst ",,$(BR2_TARGET_U_BOOT_SERVERIP)),' $(U_BOOT_INC_CONF_FILE) +ifneq ($(TARGET_UBOOT_IPADDR),) + echo "#define CONFIG_IPADDR $(TARGET_UBOOT_IPADDR)">> $(UBOOT_CUSTOM).test endif -ifneq ($(strip $(BR2_TARGET_U_BOOT_IPADDR)),"") - @echo "#define CONFIG_IPADDR" >> $(U_BOOT_INC_CONF_FILE) - $(SED) 's,^#define.*CONFIG_IPADDR.*,#define CONFIG_IPADDR $(subst ",,$(BR2_TARGET_U_BOOT_IPADDR)),' $(U_BOOT_INC_CONF_FILE) -ifneq ($(strip $(BR2_TARGET_U_BOOT_GATEWAY)),"") - @echo "#define CONFIG_GATEWAYIP" >> $(U_BOOT_INC_CONF_FILE) - $(SED) 's,^#define.*CONFIG_GATEWAYIP.*,#define CONFIG_GATEWAYIP $(subst ",,$(BR2_TARGET_U_BOOT_GATEWAY)),' $(U_BOOT_INC_CONF_FILE) +ifneq ($(TARGET_UBOOT_SERVERIP),) + echo "#define CONFIG_SERVERIP $(TARGET_UBOOT_SERVERIP)">> $(UBOOT_CUSTOM).test endif -ifneq ($(strip $(BR2_TARGET_U_BOOT_NETMASK)),"") - @echo "#define CONFIG_NETMASK" >> $(U_BOOT_INC_CONF_FILE) - $(SED) 's,^#define.*CONFIG_NETMASK.*,#define CONFIG_NETMASK $(subst ",,$(BR2_TARGET_U_BOOT_NETMASK)),' $(U_BOOT_INC_CONF_FILE) +ifneq ($(TARGET_UBOOT_GATEWAY),) + echo "#define CONFIG_GATEWAYIP $(TARGET_UBOOT_GATEWAY)">> $(UBOOT_CUSTOM).test endif -endif # end BR2_TARGET_U_BOOT_IPADDR -ifneq ($(strip $(BR2_TARGET_U_BOOT_ETH0ADDR)),"") - @echo "#define CONFIG_ETHADDR" >> $(U_BOOT_INC_CONF_FILE) - $(SED) 's,^#define.*CONFIG_ETHADDR.*,#define CONFIG_ETHADDR $(subst ",,$(BR2_TARGET_U_BOOT_ETH0ADDR)),' $(U_BOOT_INC_CONF_FILE) +ifneq ($(TARGET_UBOOT_NETMASK),) + echo "#define CONFIG_NETMASK $(TARGET_UBOOT_NETMASK)">> $(UBOOT_CUSTOM).test endif -ifneq ($(strip $(BR2_TARGET_U_BOOT_ETH1ADDR)),"") - @echo "#define CONFIG_ETH1ADDR" >> $(U_BOOT_INC_CONF_FILE) - $(SED) 's,^#define.*CONFIG_ETH1ADDR.*,#define CONFIG_ETH1ADDR $(subst ",,$(BR2_TARGET_U_BOOT_ETH1ADDR)),' $(U_BOOT_INC_CONF_FILE) +ifneq ($(TARGET_UBOOT_ETHADDR),) + echo "#define CONFIG_ETHADDR $(TARGET_UBOOT_ETHADDR)">> $(UBOOT_CUSTOM).test endif -ifneq ($(strip $(BR2_TARGET_U_BOOT_BOOTARGS)),"") - @echo "#undef CONFIG_BOOTARGS" >> $(U_BOOT_INC_CONF_FILE) - @echo '#define CONFIG_BOOTARGS $(BR2_TARGET_U_BOOT_BOOTARGS)' >> $(U_BOOT_INC_CONF_FILE) + diff -q $(UBOOT_CUSTOM).test $(UBOOT_CUSTOM) || cp -af $(UBOOT_CUSTOM).test $(UBOOT_CUSTOM) + +$(UBOOT_SCR): .config +ifneq ($(TARGET_UBOOT_IPADDR),) + echo setenv ipaddr $(TARGET_UBOOT_IPADDR) > $(UBOOT_SCR) endif -ifneq ($(strip $(BR2_TARGET_U_BOOT_BOOTCMD)),"") - @echo "#undef CONFIG_BOOTCOMMAND" >> $(U_BOOT_INC_CONF_FILE) - @echo '#define CONFIG_BOOTCOMMAND $(BR2_TARGET_U_BOOT_BOOTCMD)' >> $(U_BOOT_INC_CONF_FILE) +ifneq ($(TARGET_UBOOT_SERVERIP),) + echo setenv serverip $(TARGET_UBOOT_SERVERIP) >> $(UBOOT_SCR) endif - @echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(U_BOOT_INC_CONF_FILE) - touch $@ +ifneq ($(TARGET_UBOOT_GATEWAY),) + echo setenv gatewayip $(TARGET_UBOOT_GATEWAY) >> $(UBOOT_SCR) +endif +ifneq ($(TARGET_UBOOT_NETMASK),) + echo setenv netmask $(TARGET_UBOOT_NETMASK) >> $(UBOOT_SCR) +endif + echo setenv linux $(BOARD_NAME)-linux-$(LINUX26_VERSION)-$(DATE).gz >> $(UBOOT_SCR) + echo setenv kernel-version $(LINUX26_VERSION) >> $(UBOOT_SCR) + echo setenv kernel-date $(DATE) >> $(UBOOT_SCR) + echo setenv hostname $(TARGET_HOSTNAME) >> $(UBOOT_SCR) + echo setenv fs-date $(DATE) >> $(UBOOT_SCR) + echo setenv rd-1 rootfs.$(BR2_ARCH)-$(DATE).ext2 >> $(UBOOT_SCR) + echo setenv rd-2 rootfs.$(BR2_ARCH)-$(DATE).jffs2 >> $(UBOOT_SCR) + echo setenv rd rootfs.$(BR2_ARCH)-$(DATE).ext2 >> $(UBOOT_SCR) + echo setenv ver 1 >> $(UBOOT_SCR) +ifneq ($(TARGET_UBOOT_ETHADDR),) + echo setenv ethaddr $(TARGET_UBOOT_ETHADDR) >> $(UBOOT_SCR) +endif + echo setenv fstype ram >> $(UBOOT_SCR) + echo fs >> $(UBOOT_SCR) + echo os >> $(UBOOT_SCR) + echo setargs >> $(UBOOT_SCR) + echo saveenv >> $(UBOOT_SCR) + +$(UBOOT_SCR).$(PROJECT): $(UBOOT_SCR) $(MKIMAGE) + $(MKIMAGE) -A arm \ + -O linux \ + -T script \ + -C none \ + -a 0 \ + -e 0 \ + -n "autoscr config" \ + -d $(UBOOT_SCR) \ + $(UBOOT_SCR).$(PROJECT) + cp $(UBOOT_SCR).$(PROJECT) /tftpboot + +$(MKIMAGE): $(MKIMAGE_BINLOC) + cp -f $(MKIMAGE_BINLOC) $(MKIMAGE) + +uboot: $(MKIMAGE) uboot-bin $(UBOOT_SCR).$(PROJECT) -$(U_BOOT_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/.header_modified - $(TARGET_CONFIGURE_OPTS) \ - CFLAGS="$(TARGET_CFLAGS)" \ - LDFLAGS="$(TARGET_LDFLAGS)" \ - $(MAKE) -C $(U_BOOT_DIR) +uboot-source: $(DL_DIR)/$(UBOOT_SOURCE) + +uboot-clean: + rm -fr $(UBOOT_BUILD_DIR) + rm -fr $(UBOOT_PATCHES) + rm -f $(BINARIES_DIR)/$(UBOOT_BIN) + rm -fr $(UBOOT_DIR) + rm -f $(UBOOT_SCR) + rm -f $(UBOOT_SCR).$(PROJECT) +# -$(MAKE) -C $(UBOOT_DIR)/uboot-tools clean + +uboot-dirclean: uboot-clean + rm -rf $(UBOOT_DIR) + +uboot-new: + rm -fr $(UBOOT_BUILD_DIR)/u-boot + rm -fr $(UBOOT_BUILD_DIR)/u-boot.gz + rm -fr $(UBOOT_BUILD_DIR)/u-boot.bin + rm -fr /tftpboot/$(UBOOT_BIN) + rm -fr $(BINARIES_DIR)/$(UBOOT_BIN) + +.PHONY: uboot-bin +############################################################# +# +# Build the uboot root filesystem image +# +############################################################# -$(BINARIES_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/$(U_BOOT_BIN) - cp -dpf $(U_BOOT_DIR)/$(U_BOOT_BIN) $(BINARIES_DIR) - cp -dpf $(U_BOOT_DIR)/tools/$(U_BOOT_TOOLS_BIN) $(STAGING_DIR)/usr/bin/ +UBOOT_TARGET:=$(IMAGE).uboot -u-boot: gcc $(BINARIES_DIR)/$(U_BOOT_BIN) +ubootroot: host-fakeroot makedevs uboot + -@find $(TARGET_DIR) -type f -perm +111 | xargs $(STRIPCMD) 2>/dev/null || true + @rm -rf $(TARGET_DIR)/usr/man + @rm -rf $(TARGET_DIR)/usr/info + -/sbin/ldconfig -r $(TARGET_DIR) 2>/dev/null + # Use fakeroot to pretend all target binaries are owned by root + rm -f $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET)) + touch $(STAGING_DIR)/.fakeroot.00000 + cat $(STAGING_DIR)/.fakeroot* > $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET)) + echo "chown -R root:root $(TARGET_DIR)" >> $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET)) + # Use fakeroot to pretend to create all needed device nodes + echo "$(STAGING_DIR)/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \ + >> $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET)) + # Use fakeroot so mkuboot believes the previous fakery + echo "$(UBOOT_DIR)/uboot-tools/mkuboot " \ + "$(TARGET_DIR) $(UBOOT_TARGET) " \ + "-noappend $(UBOOT_ENDIANNESS)" \ + >> $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET)) + chmod a+x $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET)) + $(STAGING_DIR)/usr/bin/fakeroot -- $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET)) + -@rm -f $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET)) -u-boot-clean: - $(MAKE) -C $(U_BOOT_DIR) clean +ubootroot-source: uboot-source -u-boot-dirclean: - rm -rf $(U_BOOT_DIR) +ubootroot-clean: + -$(MAKE) -C $(UBOOT_DIR) clean -u-boot-source: $(DL_DIR)/$(U_BOOT_SOURCE) +ubootroot-dirclean: + rm -rf $(UBOOT_DIR) ############################################################# # # Toplevel Makefile options # ############################################################# -ifeq ($(strip $(BR2_TARGET_U_BOOT)),y) -TARGETS+=u-boot +ifeq ($(strip $(BR2_TARGET_UBOOT)),y) +TARGETS+=uboot endif -u-boot-status: - @echo - @echo U_BOOT_INC_CONF_FILE = $(U_BOOT_INC_CONF_FILE) - @echo - @echo BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE = $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE) - @echo BR2_TARGET_U_BOOT_CONFIG_BOARD = $(BR2_TARGET_U_BOOT_CONFIG_BOARD) - @echo BR2_TARGET_U_BOOT_SERVERIP = $(BR2_TARGET_U_BOOT_SERVERIP) - @echo BR2_TARGET_U_BOOT_IPADDR = $(BR2_TARGET_U_BOOT_IPADDR) - @echo BR2_TARGET_U_BOOT_GATEWAY = $(BR2_TARGET_U_BOOT_GATEWAY) - @echo BR2_TARGET_U_BOOT_NETMASK = $(BR2_TARGET_U_BOOT_NETMASK) - @echo BR2_TARGET_U_BOOT_ETH0ADDR = $(BR2_TARGET_U_BOOT_ETH0ADDR) - @echo BR2_TARGET_U_BOOT_ETH1ADDR = $(BR2_TARGET_U_BOOT_ETH1ADDR) - @echo BR2_TARGET_U_BOOT_BOOTARGS = $(BR2_TARGET_U_BOOT_BOOTARGS) - @echo BR2_TARGET_U_BOOT_BOOTCMD = $(BR2_TARGET_U_BOOT_BOOTCMD) - @echo - @exit 0 +uboot-test: + -@echo source=$(DL_DIR)/$(UBOOT_SOURCE) + -@ls $(DL_DIR)/$(UBOOT_SOURCE) + -@echo patch=$(DL_DIR)/$(UBOOT_PATCH_SOURCE) + -@ls $(DL_DIR)/$(UBOOT_PATCH_SOURCE) + -@echo unpacked=$(UBOOT_PATCHES)/.unpacked + -@ls $(UBOOT_PATCHES)/.unpacked + -@echo patch-unpacked=$(UBOOT_PATCHES)/.unpacked + -@ls $(UBOOT_PATCHES)/.unpacked + -@echo patched-source=$(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE) + -@ls $(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE) + -@echo configured=$(UBOOT_BUILD_DIR)/.configured + -@ls $(UBOOT_BUILD_DIR)/.configured + -@echo mkimage=$(MKIMAGE_BINLOC) + -@ls $(MKIMAGE_BINLOC) + -@echo u-boot.bin=$(UBOOT_BUILD_DIR)/u-boot.bin + -@ls $(UBOOT_BUILD_DIR)/u-boot.bin + -@echo binaries-u-boot.bin=$(BINARIES_DIR)/$(UBOOT_BIN) + -@ls $(BINARIES_DIR)/$(UBOOT_BIN) + -@echo tftpboot=/tftpboot/$(UBOOT_BIN) + -@ls /tftpboot/$(UBOOT_BIN) + -@echo "mkimage = $(MKIMAGE)" + -@ls $(MKIMAGE) + -@echo "u-boot script=$(UBOOT_SCR).$(PROJECT)" + -@ls $(UBOOT_SCR).$(PROJECT) + -@echo "u-boot script (ASCII)=$(UBOOT_SCR)" + -@ls $(UBOOT_SCR) + -@echo "mkimage binary=$(MKIMAGE_BINLOC)" + -@ls $(MKIMAGE_BINLOC) |