summaryrefslogtreecommitdiff
path: root/target/device
diff options
context:
space:
mode:
Diffstat (limited to 'target/device')
-rw-r--r--target/device/Atmel/arch-avr32/kernel-patches-2.6.22.1/linux-2.6.22.1-008-atmel-gpio_mouse-setup-for-atstk1000-board.patch130
-rw-r--r--target/device/Atmel/linux/kernel-patches-2.6.22.1/linux-2.6.22.1-001-at91+avr32.patch (renamed from target/device/Atmel/arch-avr32/kernel-patches-2.6.22.1/linux-2.6.22.1-003-atmel.3-avr32-updates.patch)23513
-rw-r--r--target/device/Atmel/linux/kernel-patches-2.6.22.1/linux-2.6.22.1-005-atags-support.patch122
3 files changed, 16756 insertions, 7009 deletions
diff --git a/target/device/Atmel/arch-avr32/kernel-patches-2.6.22.1/linux-2.6.22.1-008-atmel-gpio_mouse-setup-for-atstk1000-board.patch b/target/device/Atmel/arch-avr32/kernel-patches-2.6.22.1/linux-2.6.22.1-008-atmel-gpio_mouse-setup-for-atstk1000-board.patch
deleted file mode 100644
index 5683be6f3..000000000
--- a/target/device/Atmel/arch-avr32/kernel-patches-2.6.22.1/linux-2.6.22.1-008-atmel-gpio_mouse-setup-for-atstk1000-board.patch
+++ /dev/null
@@ -1,130 +0,0 @@
->From 9c5fa914202d20756c56e0c4fd76035ed8f8ced8 Mon Sep 17 00:00:00 2001
-From: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
-Date: Mon, 6 Aug 2007 08:31:14 +0200
-Subject: [PATCH 1/1] Add gpio_mouse board setup to atstk1000 board
-
-This patch adds a gpio_mouse_platform_data to the atstk1000 board code and
-registers a gpio_mouse platform_device. This will enable a GPIO mouse on header
-J1 on GPIO of the ATSTK1000 development kit. The board code is enabled/disabled
-in menuconfig.
-
-By connecting J1 (GPIO) to J25 (SWITCH) you can use the following keys to
-simulate a mouse:
-
-SW0: right
-SW1: down
-SW2: up
-SW3: left
-SW5: right button
-SW6: middle button
-SW7: left button
-
-Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
----
- arch/avr32/boards/atstk1000/Kconfig | 16 ++++++++++
- arch/avr32/boards/atstk1000/atstk1002.c | 48 +++++++++++++++++++++++++++++++
- 2 files changed, 64 insertions(+), 0 deletions(-)
-
-diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
-index 718578f..d99d4bd 100644
---- a/arch/avr32/boards/atstk1000/Kconfig
-+++ b/arch/avr32/boards/atstk1000/Kconfig
-@@ -50,6 +50,22 @@ config BOARD_ATSTK1002_SPI1
- GPIO lines and accessed through the J1 jumper block. Say "y"
- here to configure that SPI controller.
-
-+config BOARD_ATSTK1002_GPIO_MOUSE
-+ bool "Configure gpio_mouse on GPIO J1 header"
-+ depends on !BOARD_ATSTK1002_SW4_CUSTOM
-+ help
-+ Enable gpio_mouse board configuration on GPIO 0 to 7. Connecting a
-+ 10-pin flat cable from J1 (GPIO) to J25 (SWITCH) will let a user give
-+ mouse inputs using the the switches SW0 to SW7.
-+
-+ SW0: right
-+ SW1: down
-+ SW2: up
-+ SW3: left
-+ SW5: right button
-+ SW6: middle button
-+ SW7: left button
-+
- config BOARD_ATSTK1002_J2_LED
- bool
- default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
-diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
-index c958fd4..c7560e5 100644
---- a/arch/avr32/boards/atstk1000/atstk1002.c
-+++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -17,6 +17,7 @@
- #include <linux/types.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/at73c213.h>
-+#include <linux/gpio_mouse.h>
-
- #include <video/atmel_lcdc.h>
-
-@@ -91,6 +92,49 @@ static struct mci_platform_data __initdata mci0_data = {
- .wp_pin = GPIO_PIN_NONE,
- };
-
-+#ifdef CONFIG_BOARD_ATSTK1002_GPIO_MOUSE
-+static struct gpio_mouse_platform_data gpio_mouse0_data = {
-+ .polarity = GPIO_MOUSE_POLARITY_ACT_LOW,
-+ {
-+ {
-+ .up = GPIO_PIN_PB(2),
-+ .down = GPIO_PIN_PB(1),
-+ .left = GPIO_PIN_PB(3),
-+ .right = GPIO_PIN_PB(0),
-+ .bleft = GPIO_PIN_PB(7),
-+ .bmiddle = GPIO_PIN_PB(6),
-+ .bright = GPIO_PIN_PB(5),
-+ },
-+ },
-+ .scan_ms = 10,
-+};
-+
-+static struct platform_device gpio_mouse0_device = {
-+ .name = "gpio_mouse",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &gpio_mouse0_data,
-+ },
-+};
-+
-+static void __init add_device_gpio_mouse0(void)
-+{
-+ struct platform_device *pdev = &gpio_mouse0_device;
-+ struct gpio_mouse_platform_data *data = pdev->dev.platform_data;
-+
-+ at32_select_gpio(data->up, 0);
-+ at32_select_gpio(data->down, 0);
-+ at32_select_gpio(data->left, 0);
-+ at32_select_gpio(data->right, 0);
-+
-+ at32_select_gpio(data->bleft, 0);
-+ at32_select_gpio(data->bmiddle, 0);
-+ at32_select_gpio(data->bright, 0);
-+
-+ platform_device_register(pdev);
-+}
-+#endif
-+
- /*
- * The next two functions should go away as the boot loader is
- * supposed to initialize the macb address registers with a valid
-@@ -317,6 +361,10 @@ static int __init atstk1002_init(void)
- #endif
- #endif
-
-+#ifdef CONFIG_BOARD_ATSTK1002_GPIO_MOUSE
-+ add_device_gpio_mouse0();
-+#endif
-+
- return 0;
- }
- postcore_initcall(atstk1002_init);
---
-1.5.2.3
-
diff --git a/target/device/Atmel/arch-avr32/kernel-patches-2.6.22.1/linux-2.6.22.1-003-atmel.3-avr32-updates.patch b/target/device/Atmel/linux/kernel-patches-2.6.22.1/linux-2.6.22.1-001-at91+avr32.patch
index 9da7547b3..adc8189a6 100644
--- a/target/device/Atmel/arch-avr32/kernel-patches-2.6.22.1/linux-2.6.22.1-003-atmel.3-avr32-updates.patch
+++ b/target/device/Atmel/linux/kernel-patches-2.6.22.1/linux-2.6.22.1-001-at91+avr32.patch
@@ -1,2279 +1,8603 @@
-diff --git a/MAINTAINERS b/MAINTAINERS
-index df40a4e..3c5cfef 100644
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -674,6 +674,13 @@ P: Haavard Skinnemoen
- M: hskinnemoen@atmel.com
- S: Supported
+Index: linux-2.6.22.1/include/asm-arm/arch-at91/at91sam9260_matrix.h
+===================================================================
+--- linux-2.6.22.1/include/asm-arm/arch-at91/at91sam9260_matrix.h (revision 1)
++++ linux-2.6.22.1/include/asm-arm/arch-at91/at91sam9260_matrix.h (arbetskopia)
+@@ -67,7 +67,7 @@
+ #define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
+ #define AT91_MATRIX_CS4A_SMC (0 << 4)
+ #define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+-#define AT91_MATRIX_CS5A (1 << 5 ) /* Chip Select 5 Assignment */
++#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
+ #define AT91_MATRIX_CS5A_SMC (0 << 5)
+ #define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+ #define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+Index: linux-2.6.22.1/include/asm-arm/arch-at91/ics1523.h
+===================================================================
+--- linux-2.6.22.1/include/asm-arm/arch-at91/ics1523.h (revision 0)
++++ linux-2.6.22.1/include/asm-arm/arch-at91/ics1523.h (revision 0)
+@@ -0,0 +1,154 @@
++//*----------------------------------------------------------------------------
++//* ATMEL Microcontroller Software Support - ROUSSET -
++//*----------------------------------------------------------------------------
++//* The software is delivered "AS IS" without warranty or condition of any
++//* kind, either express, implied or statutory. This includes without
++//* limitation any warranty or condition with respect to merchantability or
++//* fitness for any particular purpose, or against the infringements of
++//* intellectual property rights of others.
++//*----------------------------------------------------------------------------
++//* File Name : ics1523.h
++//* Object : Clock Generator Prototyping File.
++//*
++//* 1.0 08/28/02 ED : Creation
++//* 1.2 13/01/03 FB : Update on lib V3
++//*----------------------------------------------------------------------------
++
++#ifndef ics1523_h
++#define ics1523_h
++
++/*-------------------------------------------*/
++/* ICS1523 TWI Serial Clock Definition */
++/*-------------------------------------------*/
++
++#define ICS_MIN_CLOCK 100 /* Min Frequency Access Clock KHz */
++#define ICS_MAX_CLOCK 400 /* Max Frequency Access Clock KHz */
++#define ICS_TRANSFER_RATE ICS_MAX_CLOCK /* Transfer speed to apply */
++
++#define ICS_WRITE_CLK_PNB 30 /* TWCK Clock Periods required to write */
++#define ICS_READ_CLK_PNB 40 /* TWCK Clock Periods required to read */
++
++/*-------------------------------------------*/
++/* ICS1523 Write Operation Definition */
++/*-------------------------------------------*/
++
++#define ICS1523_ACCESS_OK 0 /* OK */
++#define ICS1523_ACCESS_ERROR -1 /* NOK */
++
++/*-------------------------------------------*/
++/* ICS1523 Device Addresses Definition */
++/*-------------------------------------------*/
++
++#define ICS_ADDR 0x26 /* Device Address */
++
++/*--------------------------------------------------*/
++/* ICS1523 Registers Internal Addresses Definition */
++/*--------------------------------------------------*/
++
++#define ICS_ICR 0x0 /* Input Control Register */
++#define ICS_LCR 0x1 /* Loop Control Register */
++#define ICS_FD0 0x2 /* PLL FeedBack Divider LSBs */
++#define ICS_FD1 0x3 /* PLL FeedBack Divider MSBs */
++#define ICS_DPAO 0x4 /* Dynamic Phase Aligner Offset */
++#define ICS_DPAC 0x5 /* Dynamic Phase Aligner Resolution */
++#define ICS_OE 0x6 /* Output Enables Register */
++#define ICS_OD 0x7 /* Osc Divider Register */
++#define ICS_SWRST 0x8 /* DPA & PLL Reset Register */
++#define ICS_VID 0x10 /* Chip Version Register */
++#define ICS_RID 0x11 /* Chip Revision Register */
++#define ICS_SR 0x12 /* Status Register */
++
++/*------------------------------------------------------*/
++/* ICS1523 Input Control Register Bits Definition */
++/*------------------------------------------------------*/
++
++#define ICS_PDEN 0x1 /* Phase Detector Enable */
++#define ICS_PDPOL 0x2 /* Phase Detector Enable Polarity */
++#define ICS_REFPOL 0x4 /* External Reference Polarity */
++#define ICS_FBKPOL 0x8 /* External Feedback Polarity */
++#define ICS_FBKSEL 0x10 /* External Feedback Select */
++#define ICS_FUNCSEL 0x20 /* Function Out Select */
++#define ICS_ENPLS 0x40 /* Enable PLL Lock/Ref Status Output */
++#define ICS_ENDLS 0x80 /* Enable DPA Lock/Ref Status Output */
++
++/*-----------------------------------------------------*/
++/* ICS1523 Loop Control Register Bits Definition */
++/*-----------------------------------------------------*/
++
++#define ICS_PFD 0x7 /* Phase Detector Gain */
++#define ICS_PSD 0x30 /* Post-Scaler Divider */
++
++/*----------------------------------------------------*/
++/* ICS1523 PLL FeedBack Divider LSBs Definition */
++/*----------------------------------------------------*/
++
++#define ICS_FBDL 0xFF /* PLL FeedBack Divider LSBs */
++
++/*----------------------------------------------------*/
++/* ICS1523 PLL FeedBack Divider MSBs Definition */
++/*----------------------------------------------------*/
++
++#define ICS_FBDM 0xF /* PLL FeedBack Divider MSBs */
++
++/*------------------------------------------------------------*/
++/* ICS1523 Dynamic Phase Aligner Offset Bits Definition */
++/*------------------------------------------------------------*/
++
++#define ICS_DPAOS 0x2F /* Dynamic Phase Aligner Offset */
++#define ICS_FILSEL 0x80 /* Loop Filter Select */
++
++/*----------------------------------------------------------------*/
++/* ICS1523 Dynamic Phase Aligner Resolution Bits Definition */
++/*----------------------------------------------------------------*/
++
++#define ICS_DPARES 0x3 /* Dynamic Phase Aligner Resolution */
++#define ICS_MMREV 0xFC /* Metal Mask Revision Number */
++
++/*-------------------------------------------------------*/
++/* ICS1523 Output Enables Register Bits Definition */
++/*-------------------------------------------------------*/
++
++#define ICS_OEPCK 0x1 /* Output Enable for PECL PCLK Outputs */
++#define ICS_OETCK 0x2 /* Output Enable for STTL CLK Output */
++#define ICS_OEP2 0x4 /* Output Enable for PECL CLK/2 Outputs */
++#define ICS_OET2 0x8 /* Output Enable for STTL CLK/2 Output */
++#define ICS_OEF 0x10 /* Output Enable for STTL FUNC Output */
++#define ICS_CLK2INV 0x20 /* CLK/2 Invert */
++#define ICS_OSCL 0xC0 /* SSTL Clock Scaler */
++
++/*----------------------------------------------------*/
++/* ICS1523 Osc Divider Register Bits Definition */
++/*----------------------------------------------------*/
++
++#define ICS_OSCDIV 0x7F /* Oscillator Divider Modulus */
++#define ICS_INSEL 0x80 /* Input Select */
++
++/*---------------------------------------------------*/
++/* ICS1523 DPA & PLL Reset Register Definition */
++/*---------------------------------------------------*/
++
++#define ICS_DPAR 0x0A /* DPA Reset Command */
++#define ICS_PLLR 0x50 /* PLL Reset Command */
++
++/*------------------------------------------------*/
++/* ICS1523 Chip Version Register Definition */
++/*------------------------------------------------*/
++
++#define ICS_CHIPV 0xFF /* Chip Version */
++
++/*-------------------------------------------------*/
++/* ICS1523 Chip Revision Register Definition */
++/*-------------------------------------------------*/
++
++#define ICS_CHIPR 0xFF /* Chip Revision */
++
++/*------------------------------------------*/
++/* ICS1523 Status Register Definition */
++/*------------------------------------------*/
++
++#define ICS_DPALOCK 0x1 /* DPA Lock Status */
++#define ICS_PLLLOCK 0x2 /* PLL Lock Status */
++
++int at91_ics1523_init(void);
++
++#endif /* ics1523_h */
+Index: linux-2.6.22.1/include/asm-arm/arch-at91/spi.h
+===================================================================
+--- linux-2.6.22.1/include/asm-arm/arch-at91/spi.h (revision 0)
++++ linux-2.6.22.1/include/asm-arm/arch-at91/spi.h (revision 0)
+@@ -0,0 +1,54 @@
++/*
++ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200
++ *
++ * (c) SAN People (Pty) Ltd
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifndef AT91_LEGACY_SPI_H
++#define AT91_LEGACY_SPI_H
++
++#define SPI_MAJOR 153 /* registered device number */
++
++#define DEFAULT_SPI_CLK 6000000
++
++
++/* Maximum number of buffers in a single SPI transfer.
++ * DataFlash uses maximum of 2
++ * spidev interface supports up to 8.
++ */
++#define MAX_SPI_TRANSFERS 8
++#define NR_SPI_DEVICES 4 /* number of devices on SPI bus */
++
++/*
++ * Describes the buffers for a SPI transfer.
++ * A transmit & receive buffer must be specified for each transfer
++ */
++struct spi_transfer_list {
++ void* tx[MAX_SPI_TRANSFERS]; /* transmit */
++ int txlen[MAX_SPI_TRANSFERS];
++ void* rx[MAX_SPI_TRANSFERS]; /* receive */
++ int rxlen[MAX_SPI_TRANSFERS];
++ int nr_transfers; /* number of transfers */
++ int curr; /* current transfer */
++};
++
++struct spi_local {
++ unsigned int pcs; /* Peripheral Chip Select value */
++
++ struct spi_transfer_list *xfers; /* current transfer list */
++ dma_addr_t tx, rx; /* DMA address for current transfer */
++ dma_addr_t txnext, rxnext; /* DMA address for next transfer */
++};
++
++
++/* Exported functions */
++extern void spi_access_bus(short device);
++extern void spi_release_bus(short device);
++extern int spi_transfer(struct spi_transfer_list* list);
++
++#endif
+Index: linux-2.6.22.1/include/asm-arm/arch-at91/at91_mci.h
+===================================================================
+--- linux-2.6.22.1/include/asm-arm/arch-at91/at91_mci.h (revision 1)
++++ linux-2.6.22.1/include/asm-arm/arch-at91/at91_mci.h (arbetskopia)
+@@ -26,6 +26,9 @@
+ #define AT91_MCI_MR 0x04 /* Mode Register */
+ #define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */
+ #define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */
++#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */
++#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */
++#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */
+ #define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */
+ #define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */
+ #define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
+Index: linux-2.6.22.1/include/asm-arm/arch-at91/at91_pmc.h
+===================================================================
+--- linux-2.6.22.1/include/asm-arm/arch-at91/at91_pmc.h (revision 1)
++++ linux-2.6.22.1/include/asm-arm/arch-at91/at91_pmc.h (arbetskopia)
+@@ -37,7 +37,9 @@
+ #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
+ #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
+
+-#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */
++#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL only] */
++
++#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
+ #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
+ #define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
+ #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
+Index: linux-2.6.22.1/include/asm-arm/arch-at91/board.h
+===================================================================
+--- linux-2.6.22.1/include/asm-arm/arch-at91/board.h (revision 1)
++++ linux-2.6.22.1/include/asm-arm/arch-at91/board.h (arbetskopia)
+@@ -64,6 +64,7 @@
-+ATMEL USBA UDC DRIVER
-+P: Haavard Skinnemoen
-+M: hskinnemoen@atmel.com
-+L: kernel@avr32linux.org
-+W: http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
-+S: Supported
+ /* Ethernet (EMAC & MACB) */
+ struct at91_eth_data {
++ u32 phy_mask;
+ u8 phy_irq_pin; /* PHY IRQ */
+ u8 is_rmii; /* using RMII interface? */
+ };
+@@ -124,9 +125,21 @@
+ };
+ extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+
++ /* ISI */
++extern void __init at91_add_device_isi(void);
++
+ /* LEDs */
+ extern u8 at91_leds_cpu;
+ extern u8 at91_leds_timer;
+ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
+
++struct at91_gpio_led {
++ u8 index; /* index of LED */
++ char* name; /* name of LED */
++ u8 gpio; /* AT91_PIN_xx */
++ u8 flags; /* 1=active-high */
++ char* trigger; /* default trigger */
++};
++extern void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr);
+
- ATMEL WIRELESS DRIVER
- P: Simon Kelley
- M: simon@thekelleys.org.uk
-diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
-index 3ec7658..ec6c7c5 100644
---- a/arch/avr32/Kconfig
-+++ b/arch/avr32/Kconfig
-@@ -113,6 +113,13 @@ config BOARD_ATNGW100
- bool "ATNGW100 Network Gateway"
- endchoice
+ #endif
+Index: linux-2.6.22.1/include/linux/spi/at73c213.h
+===================================================================
+--- linux-2.6.22.1/include/linux/spi/at73c213.h (revision 0)
++++ linux-2.6.22.1/include/linux/spi/at73c213.h (revision 0)
+@@ -0,0 +1,25 @@
++/*
++ * Board-specific data used to set up AT73c213 audio DAC driver.
++ */
++
++#ifndef __LINUX_SPI_AT73C213_H
++#define __LINUX_SPI_AT73C213_H
++
++/**
++ * at73c213_board_info - how the external DAC is wired to the device.
++ *
++ * @ssc_id: SSC platform_driver id the DAC shall use to stream the audio.
++ * @dac_clk: the external clock used to provide master clock to the DAC.
++ * @shortname: a short discription for the DAC, seen by userspace tools.
++ *
++ * This struct contains the configuration of the hardware connection to the
++ * external DAC. The DAC needs a master clock and a I2S audio stream. It also
++ * provides a name which is used to identify it in userspace tools.
++ */
++struct at73c213_board_info {
++ int ssc_id;
++ struct clk *dac_clk;
++ char shortname[32];
++};
++
++#endif /* __LINUX_SPI_AT73C213_H */
+Index: linux-2.6.22.1/include/linux/leds.h
+===================================================================
+--- linux-2.6.22.1/include/linux/leds.h (revision 1)
++++ linux-2.6.22.1/include/linux/leds.h (arbetskopia)
+@@ -110,4 +110,18 @@
+ #define ledtrig_ide_activity() do {} while(0)
+ #endif
-+if BOARD_ATSTK1000
-+source "arch/avr32/boards/atstk1000/Kconfig"
-+endif
-+if BOARD_ATNGW100
-+source "arch/avr32/boards/atngw100/Kconfig"
-+endif
++/* For the leds-gpio driver */
++struct gpio_led {
++ const char *name;
++ char *default_trigger;
++ unsigned gpio;
++ u8 active_low;
++};
+
- choice
- prompt "Boot loader type"
- default LOADER_U_BOOT
-@@ -171,6 +178,10 @@ config OWNERSHIP_TRACE
- enabling Nexus-compliant debuggers to keep track of the PID of the
- currently executing task.
++struct gpio_led_platform_data {
++ int num_leds;
++ struct gpio_led *leds;
++};
++
++
+ #endif /* __LINUX_LEDS_H_INCLUDED */
+Index: linux-2.6.22.1/include/linux/clk.h
+===================================================================
+--- linux-2.6.22.1/include/linux/clk.h (revision 1)
++++ linux-2.6.22.1/include/linux/clk.h (arbetskopia)
+@@ -121,4 +121,24 @@
+ */
+ struct clk *clk_get_parent(struct clk *clk);
-+config DW_DMAC
-+ tristate "Synopsys DesignWare DMA Controller support"
-+ default y if CPU_AT32AP7000
++/**
++ * clk_must_disable - report whether a clock's users must disable it
++ * @clk: one node in the clock tree
++ *
++ * This routine returns true only if the upcoming system state requires
++ * disabling the specified clock.
++ *
++ * It's common for platform power states to constrain certain clocks (and
++ * their descendants) to be unavailable, while other states allow that
++ * clock to be active. A platform's power states often include an "all on"
++ * mode; system wide sleep states like "standby" or "suspend-to-RAM"; and
++ * operating states which sacrifice functionality for lower power usage.
++ *
++ * The constraint value is commonly tested in device driver suspend(), to
++ * leave clocks active if they are needed for features like wakeup events.
++ * On platforms that support reduced functionality operating states, the
++ * constraint may also need to be tested during resume() and probe() calls.
++ */
++int clk_must_disable(struct clk *clk);
+
- # FPU emulation goes here
+ #endif
+Index: linux-2.6.22.1/include/linux/usb/Kbuild
+===================================================================
+--- linux-2.6.22.1/include/linux/usb/Kbuild (revision 1)
++++ linux-2.6.22.1/include/linux/usb/Kbuild (arbetskopia)
+@@ -1,5 +1,6 @@
+ unifdef-y += audio.h
+ unifdef-y += cdc.h
+ unifdef-y += ch9.h
++unifdef-y += gadgetfs.h
+ unifdef-y += midi.h
- source "kernel/Kconfig.hz"
-@@ -185,6 +196,27 @@ config CMDLINE
+Index: linux-2.6.22.1/include/linux/usb/gadgetfs.h
+===================================================================
+--- linux-2.6.22.1/include/linux/usb/gadgetfs.h (revision 0)
++++ linux-2.6.22.1/include/linux/usb/gadgetfs.h (revision 0)
+@@ -0,0 +1,81 @@
++#ifndef __LINUX_USB_GADGETFS_H
++#define __LINUX_USB_GADGETFS_H
++
++#include <asm/types.h>
++#include <asm/ioctl.h>
++
++#include <linux/usb/ch9.h>
++
++/*
++ * Filesystem based user-mode API to USB Gadget controller hardware
++ *
++ * Other than ep0 operations, most things are done by read() and write()
++ * on endpoint files found in one directory. They are configured by
++ * writing descriptors, and then may be used for normal stream style
++ * i/o requests. When ep0 is configured, the device can enumerate;
++ * when it's closed, the device disconnects from usb. Operations on
++ * ep0 require ioctl() operations.
++ *
++ * Configuration and device descriptors get written to /dev/gadget/$CHIP,
++ * which may then be used to read usb_gadgetfs_event structs. The driver
++ * may activate endpoints as it handles SET_CONFIGURATION setup events,
++ * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
++ * then performing data transfers by reading or writing.
++ */
++
++/*
++ * Events are delivered on the ep0 file descriptor, when the user mode driver
++ * reads from this file descriptor after writing the descriptors. Don't
++ * stop polling this descriptor.
++ */
++
++enum usb_gadgetfs_event_type {
++ GADGETFS_NOP = 0,
++
++ GADGETFS_CONNECT,
++ GADGETFS_DISCONNECT,
++ GADGETFS_SETUP,
++ GADGETFS_SUSPEND,
++ // and likely more !
++};
++
++/* NOTE: this structure must stay the same size and layout on
++ * both 32-bit and 64-bit kernels.
++ */
++struct usb_gadgetfs_event {
++ union {
++ // NOP, DISCONNECT, SUSPEND: nothing
++ // ... some hardware can't report disconnection
++
++ // CONNECT: just the speed
++ enum usb_device_speed speed;
++
++ // SETUP: packet; DATA phase i/o precedes next event
++ // (setup.bmRequestType & USB_DIR_IN) flags direction
++ // ... includes SET_CONFIGURATION, SET_INTERFACE
++ struct usb_ctrlrequest setup;
++ } u;
++ enum usb_gadgetfs_event_type type;
++};
++
++
++/* endpoint ioctls */
++
++/* IN transfers may be reported to the gadget driver as complete
++ * when the fifo is loaded, before the host reads the data;
++ * OUT transfers may be reported to the host's "client" driver as
++ * complete when they're sitting in the FIFO unread.
++ * THIS returns how many bytes are "unclaimed" in the endpoint fifo
++ * (needed for precise fault handling, when the hardware allows it)
++ */
++#define GADGETFS_FIFO_STATUS _IO('g',1)
++
++/* discards any unclaimed data in the fifo. */
++#define GADGETFS_FIFO_FLUSH _IO('g',2)
++
++/* resets endpoint halt+toggle; used to implement set_interface.
++ * some hardware (like pxa2xx) can't support this.
++ */
++#define GADGETFS_CLEAR_HALT _IO('g',3)
++
++#endif /* __LINUX_USB_GADGETFS_H */
+Index: linux-2.6.22.1/include/linux/usb_gadgetfs.h
+===================================================================
+--- linux-2.6.22.1/include/linux/usb_gadgetfs.h (revision 1)
++++ linux-2.6.22.1/include/linux/usb_gadgetfs.h (arbetskopia)
+@@ -1,75 +0,0 @@
+-
+-#include <asm/types.h>
+-#include <asm/ioctl.h>
+-
+-#include <linux/usb/ch9.h>
+-
+-/*
+- * Filesystem based user-mode API to USB Gadget controller hardware
+- *
+- * Almost everything can be done with only read and write operations,
+- * on endpoint files found in one directory. They are configured by
+- * writing descriptors, and then may be used for normal stream style
+- * i/o requests. When ep0 is configured, the device can enumerate;
+- * when it's closed, the device disconnects from usb.
+- *
+- * Configuration and device descriptors get written to /dev/gadget/$CHIP,
+- * which may then be used to read usb_gadgetfs_event structs. The driver
+- * may activate endpoints as it handles SET_CONFIGURATION setup events,
+- * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
+- * then performing data transfers by reading or writing.
+- */
+-
+-/*
+- * Events are delivered on the ep0 file descriptor, if the user mode driver
+- * reads from this file descriptor after writing the descriptors. Don't
+- * stop polling this descriptor, if you write that kind of driver.
+- */
+-
+-enum usb_gadgetfs_event_type {
+- GADGETFS_NOP = 0,
+-
+- GADGETFS_CONNECT,
+- GADGETFS_DISCONNECT,
+- GADGETFS_SETUP,
+- GADGETFS_SUSPEND,
+- // and likely more !
+-};
+-
+-struct usb_gadgetfs_event {
+- enum usb_gadgetfs_event_type type;
+- union {
+- // NOP, DISCONNECT, SUSPEND: nothing
+- // ... some hardware can't report disconnection
+-
+- // CONNECT: just the speed
+- enum usb_device_speed speed;
+-
+- // SETUP: packet; DATA phase i/o precedes next event
+- // (setup.bmRequestType & USB_DIR_IN) flags direction
+- // ... includes SET_CONFIGURATION, SET_INTERFACE
+- struct usb_ctrlrequest setup;
+- } u;
+-};
+-
+-
+-/* endpoint ioctls */
+-
+-/* IN transfers may be reported to the gadget driver as complete
+- * when the fifo is loaded, before the host reads the data;
+- * OUT transfers may be reported to the host's "client" driver as
+- * complete when they're sitting in the FIFO unread.
+- * THIS returns how many bytes are "unclaimed" in the endpoint fifo
+- * (needed for precise fault handling, when the hardware allows it)
+- */
+-#define GADGETFS_FIFO_STATUS _IO('g',1)
+-
+-/* discards any unclaimed data in the fifo. */
+-#define GADGETFS_FIFO_FLUSH _IO('g',2)
+-
+-/* resets endpoint halt+toggle; used to implement set_interface.
+- * some hardware (like pxa2xx) can't support this.
+- */
+-#define GADGETFS_CLEAR_HALT _IO('g',3)
+-
+-
+Index: linux-2.6.22.1/include/linux/atmel-ssc.h
+===================================================================
+--- linux-2.6.22.1/include/linux/atmel-ssc.h (revision 0)
++++ linux-2.6.22.1/include/linux/atmel-ssc.h (revision 0)
+@@ -0,0 +1,312 @@
++#ifndef __INCLUDE_ATMEL_SSC_H
++#define __INCLUDE_ATMEL_SSC_H
++
++#include <linux/platform_device.h>
++#include <linux/list.h>
++
++struct ssc_device {
++ struct list_head list;
++ void __iomem *regs;
++ struct platform_device *pdev;
++ struct clk *clk;
++ int user;
++ int irq;
++};
++
++struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
++void ssc_free(struct ssc_device *ssc);
++
++/* SSC register offsets */
++
++/* SSC Control Register */
++#define SSC_CR 0x00000000
++#define SSC_CR_RXDIS_SIZE 1
++#define SSC_CR_RXDIS_OFFSET 1
++#define SSC_CR_RXEN_SIZE 1
++#define SSC_CR_RXEN_OFFSET 0
++#define SSC_CR_SWRST_SIZE 1
++#define SSC_CR_SWRST_OFFSET 15
++#define SSC_CR_TXDIS_SIZE 1
++#define SSC_CR_TXDIS_OFFSET 9
++#define SSC_CR_TXEN_SIZE 1
++#define SSC_CR_TXEN_OFFSET 8
++
++/* SSC Clock Mode Register */
++#define SSC_CMR 0x00000004
++#define SSC_CMR_DIV_SIZE 12
++#define SSC_CMR_DIV_OFFSET 0
++
++/* SSC Receive Clock Mode Register */
++#define SSC_RCMR 0x00000010
++#define SSC_RCMR_CKG_SIZE 2
++#define SSC_RCMR_CKG_OFFSET 6
++#define SSC_RCMR_CKI_SIZE 1
++#define SSC_RCMR_CKI_OFFSET 5
++#define SSC_RCMR_CKO_SIZE 3
++#define SSC_RCMR_CKO_OFFSET 2
++#define SSC_RCMR_CKS_SIZE 2
++#define SSC_RCMR_CKS_OFFSET 0
++#define SSC_RCMR_PERIOD_SIZE 8
++#define SSC_RCMR_PERIOD_OFFSET 24
++#define SSC_RCMR_START_SIZE 4
++#define SSC_RCMR_START_OFFSET 8
++#define SSC_RCMR_STOP_SIZE 1
++#define SSC_RCMR_STOP_OFFSET 12
++#define SSC_RCMR_STTDLY_SIZE 8
++#define SSC_RCMR_STTDLY_OFFSET 16
++
++/* SSC Receive Frame Mode Register */
++#define SSC_RFMR 0x00000014
++#define SSC_RFMR_DATLEN_SIZE 5
++#define SSC_RFMR_DATLEN_OFFSET 0
++#define SSC_RFMR_DATNB_SIZE 4
++#define SSC_RFMR_DATNB_OFFSET 8
++#define SSC_RFMR_FSEDGE_SIZE 1
++#define SSC_RFMR_FSEDGE_OFFSET 24
++#define SSC_RFMR_FSLEN_SIZE 4
++#define SSC_RFMR_FSLEN_OFFSET 16
++#define SSC_RFMR_FSOS_SIZE 4
++#define SSC_RFMR_FSOS_OFFSET 20
++#define SSC_RFMR_LOOP_SIZE 1
++#define SSC_RFMR_LOOP_OFFSET 5
++#define SSC_RFMR_MSBF_SIZE 1
++#define SSC_RFMR_MSBF_OFFSET 7
++
++/* SSC Transmit Clock Mode Register */
++#define SSC_TCMR 0x00000018
++#define SSC_TCMR_CKG_SIZE 2
++#define SSC_TCMR_CKG_OFFSET 6
++#define SSC_TCMR_CKI_SIZE 1
++#define SSC_TCMR_CKI_OFFSET 5
++#define SSC_TCMR_CKO_SIZE 3
++#define SSC_TCMR_CKO_OFFSET 2
++#define SSC_TCMR_CKS_SIZE 2
++#define SSC_TCMR_CKS_OFFSET 0
++#define SSC_TCMR_PERIOD_SIZE 8
++#define SSC_TCMR_PERIOD_OFFSET 24
++#define SSC_TCMR_START_SIZE 4
++#define SSC_TCMR_START_OFFSET 8
++#define SSC_TCMR_STTDLY_SIZE 8
++#define SSC_TCMR_STTDLY_OFFSET 16
++
++/* SSC Transmit Frame Mode Register */
++#define SSC_TFMR 0x0000001c
++#define SSC_TFMR_DATDEF_SIZE 1
++#define SSC_TFMR_DATDEF_OFFSET 5
++#define SSC_TFMR_DATLEN_SIZE 5
++#define SSC_TFMR_DATLEN_OFFSET 0
++#define SSC_TFMR_DATNB_SIZE 4
++#define SSC_TFMR_DATNB_OFFSET 8
++#define SSC_TFMR_FSDEN_SIZE 1
++#define SSC_TFMR_FSDEN_OFFSET 23
++#define SSC_TFMR_FSEDGE_SIZE 1
++#define SSC_TFMR_FSEDGE_OFFSET 24
++#define SSC_TFMR_FSLEN_SIZE 4
++#define SSC_TFMR_FSLEN_OFFSET 16
++#define SSC_TFMR_FSOS_SIZE 3
++#define SSC_TFMR_FSOS_OFFSET 20
++#define SSC_TFMR_MSBF_SIZE 1
++#define SSC_TFMR_MSBF_OFFSET 7
++
++/* SSC Receive Hold Register */
++#define SSC_RHR 0x00000020
++#define SSC_RHR_RDAT_SIZE 32
++#define SSC_RHR_RDAT_OFFSET 0
++
++/* SSC Transmit Hold Register */
++#define SSC_THR 0x00000024
++#define SSC_THR_TDAT_SIZE 32
++#define SSC_THR_TDAT_OFFSET 0
++
++/* SSC Receive Sync. Holding Register */
++#define SSC_RSHR 0x00000030
++#define SSC_RSHR_RSDAT_SIZE 16
++#define SSC_RSHR_RSDAT_OFFSET 0
++
++/* SSC Transmit Sync. Holding Register */
++#define SSC_TSHR 0x00000034
++#define SSC_TSHR_TSDAT_SIZE 16
++#define SSC_TSHR_RSDAT_OFFSET 0
++
++/* SSC Receive Compare 0 Register */
++#define SSC_RC0R 0x00000038
++#define SSC_RC0R_CP0_SIZE 16
++#define SSC_RC0R_CP0_OFFSET 0
++
++/* SSC Receive Compare 1 Register */
++#define SSC_RC1R 0x0000003c
++#define SSC_RC1R_CP1_SIZE 16
++#define SSC_RC1R_CP1_OFFSET 0
++
++/* SSC Status Register */
++#define SSC_SR 0x00000040
++#define SSC_SR_CP0_SIZE 1
++#define SSC_SR_CP0_OFFSET 8
++#define SSC_SR_CP1_SIZE 1
++#define SSC_SR_CP1_OFFSET 9
++#define SSC_SR_ENDRX_SIZE 1
++#define SSC_SR_ENDRX_OFFSET 6
++#define SSC_SR_ENDTX_SIZE 1
++#define SSC_SR_ENDTX_OFFSET 2
++#define SSC_SR_OVRUN_SIZE 1
++#define SSC_SR_OVRUN_OFFSET 5
++#define SSC_SR_RXBUFF_SIZE 1
++#define SSC_SR_RXBUFF_OFFSET 7
++#define SSC_SR_RXEN_SIZE 1
++#define SSC_SR_RXEN_OFFSET 17
++#define SSC_SR_RXRDY_SIZE 1
++#define SSC_SR_RXRDY_OFFSET 4
++#define SSC_SR_RXSYN_SIZE 1
++#define SSC_SR_RXSYN_OFFSET 11
++#define SSC_SR_TXBUFE_SIZE 1
++#define SSC_SR_TXBUFE_OFFSET 3
++#define SSC_SR_TXEMPTY_SIZE 1
++#define SSC_SR_TXEMPTY_OFFSET 1
++#define SSC_SR_TXEN_SIZE 1
++#define SSC_SR_TXEN_OFFSET 16
++#define SSC_SR_TXRDY_SIZE 1
++#define SSC_SR_TXRDY_OFFSET 0
++#define SSC_SR_TXSYN_SIZE 1
++#define SSC_SR_TXSYN_OFFSET 10
++
++/* SSC Interrupt Enable Register */
++#define SSC_IER 0x00000044
++#define SSC_IER_CP0_SIZE 1
++#define SSC_IER_CP0_OFFSET 8
++#define SSC_IER_CP1_SIZE 1
++#define SSC_IER_CP1_OFFSET 9
++#define SSC_IER_ENDRX_SIZE 1
++#define SSC_IER_ENDRX_OFFSET 6
++#define SSC_IER_ENDTX_SIZE 1
++#define SSC_IER_ENDTX_OFFSET 2
++#define SSC_IER_OVRUN_SIZE 1
++#define SSC_IER_OVRUN_OFFSET 5
++#define SSC_IER_RXBUFF_SIZE 1
++#define SSC_IER_RXBUFF_OFFSET 7
++#define SSC_IER_RXRDY_SIZE 1
++#define SSC_IER_RXRDY_OFFSET 4
++#define SSC_IER_RXSYN_SIZE 1
++#define SSC_IER_RXSYN_OFFSET 11
++#define SSC_IER_TXBUFE_SIZE 1
++#define SSC_IER_TXBUFE_OFFSET 3
++#define SSC_IER_TXEMPTY_SIZE 1
++#define SSC_IER_TXEMPTY_OFFSET 1
++#define SSC_IER_TXRDY_SIZE 1
++#define SSC_IER_TXRDY_OFFSET 0
++#define SSC_IER_TXSYN_SIZE 1
++#define SSC_IER_TXSYN_OFFSET 10
++
++/* SSC Interrupt Disable Register */
++#define SSC_IDR 0x00000048
++#define SSC_IDR_CP0_SIZE 1
++#define SSC_IDR_CP0_OFFSET 8
++#define SSC_IDR_CP1_SIZE 1
++#define SSC_IDR_CP1_OFFSET 9
++#define SSC_IDR_ENDRX_SIZE 1
++#define SSC_IDR_ENDRX_OFFSET 6
++#define SSC_IDR_ENDTX_SIZE 1
++#define SSC_IDR_ENDTX_OFFSET 2
++#define SSC_IDR_OVRUN_SIZE 1
++#define SSC_IDR_OVRUN_OFFSET 5
++#define SSC_IDR_RXBUFF_SIZE 1
++#define SSC_IDR_RXBUFF_OFFSET 7
++#define SSC_IDR_RXRDY_SIZE 1
++#define SSC_IDR_RXRDY_OFFSET 4
++#define SSC_IDR_RXSYN_SIZE 1
++#define SSC_IDR_RXSYN_OFFSET 11
++#define SSC_IDR_TXBUFE_SIZE 1
++#define SSC_IDR_TXBUFE_OFFSET 3
++#define SSC_IDR_TXEMPTY_SIZE 1
++#define SSC_IDR_TXEMPTY_OFFSET 1
++#define SSC_IDR_TXRDY_SIZE 1
++#define SSC_IDR_TXRDY_OFFSET 0
++#define SSC_IDR_TXSYN_SIZE 1
++#define SSC_IDR_TXSYN_OFFSET 10
++
++/* SSC Interrupt Mask Register */
++#define SSC_IMR 0x0000004c
++#define SSC_IMR_CP0_SIZE 1
++#define SSC_IMR_CP0_OFFSET 8
++#define SSC_IMR_CP1_SIZE 1
++#define SSC_IMR_CP1_OFFSET 9
++#define SSC_IMR_ENDRX_SIZE 1
++#define SSC_IMR_ENDRX_OFFSET 6
++#define SSC_IMR_ENDTX_SIZE 1
++#define SSC_IMR_ENDTX_OFFSET 2
++#define SSC_IMR_OVRUN_SIZE 1
++#define SSC_IMR_OVRUN_OFFSET 5
++#define SSC_IMR_RXBUFF_SIZE 1
++#define SSC_IMR_RXBUFF_OFFSET 7
++#define SSC_IMR_RXRDY_SIZE 1
++#define SSC_IMR_RXRDY_OFFSET 4
++#define SSC_IMR_RXSYN_SIZE 1
++#define SSC_IMR_RXSYN_OFFSET 11
++#define SSC_IMR_TXBUFE_SIZE 1
++#define SSC_IMR_TXBUFE_OFFSET 3
++#define SSC_IMR_TXEMPTY_SIZE 1
++#define SSC_IMR_TXEMPTY_OFFSET 1
++#define SSC_IMR_TXRDY_SIZE 1
++#define SSC_IMR_TXRDY_OFFSET 0
++#define SSC_IMR_TXSYN_SIZE 1
++#define SSC_IMR_TXSYN_OFFSET 10
++
++/* SSC PDC Receive Pointer Register */
++#define SSC_PDC_RPR 0x00000100
++
++/* SSC PDC Receive Counter Register */
++#define SSC_PDC_RCR 0x00000104
++
++/* SSC PDC Transmit Pointer Register */
++#define SSC_PDC_TPR 0x00000108
++
++/* SSC PDC Receive Next Pointer Register */
++#define SSC_PDC_RNPR 0x00000110
++
++/* SSC PDC Receive Next Counter Register */
++#define SSC_PDC_RNCR 0x00000114
++
++/* SSC PDC Transmit Counter Register */
++#define SSC_PDC_TCR 0x0000010c
++
++/* SSC PDC Transmit Next Pointer Register */
++#define SSC_PDC_TNPR 0x00000118
++
++/* SSC PDC Transmit Next Counter Register */
++#define SSC_PDC_TNCR 0x0000011c
++
++/* SSC PDC Transfer Control Register */
++#define SSC_PDC_PTCR 0x00000120
++#define SSC_PDC_PTCR_RXTDIS_SIZE 1
++#define SSC_PDC_PTCR_RXTDIS_OFFSET 1
++#define SSC_PDC_PTCR_RXTEN_SIZE 1
++#define SSC_PDC_PTCR_RXTEN_OFFSET 0
++#define SSC_PDC_PTCR_TXTDIS_SIZE 1
++#define SSC_PDC_PTCR_TXTDIS_OFFSET 9
++#define SSC_PDC_PTCR_TXTEN_SIZE 1
++#define SSC_PDC_PTCR_TXTEN_OFFSET 8
++
++/* SSC PDC Transfer Status Register */
++#define SSC_PDC_PTSR 0x00000124
++#define SSC_PDC_PTSR_RXTEN_SIZE 1
++#define SSC_PDC_PTSR_RXTEN_OFFSET 0
++#define SSC_PDC_PTSR_TXTEN_SIZE 1
++#define SSC_PDC_PTSR_TXTEN_OFFSET 8
++
++/* Bit manipulation macros */
++#define SSC_BIT(name) \
++ (1 << SSC_##name##_OFFSET)
++#define SSC_BF(name, value) \
++ (((value) & ((1 << SSC_##name##_SIZE) - 1)) \
++ << SSC_##name##_OFFSET)
++#define SSC_BFEXT(name, value) \
++ (((value) >> SSC_##name##_OFFSET) \
++ & ((1 << SSC_##name##_SIZE) - 1))
++#define SSC_BFINS(name, value, old) \
++ (((old) & ~(((1 << SSC_##name##_SIZE) - 1) \
++ << SSC_##name##_OFFSET)) | SSC_BF(name, value))
++
++/* Register access macros */
++#define ssc_readl(base, reg) __raw_readl(base + SSC_##reg)
++#define ssc_writel(base, reg, value) __raw_writel((value), base + SSC_##reg)
++
++#endif /* __INCLUDE_ATMEL_SSC_H */
+Index: linux-2.6.22.1/include/linux/gpio_mouse.h
+===================================================================
+--- linux-2.6.22.1/include/linux/gpio_mouse.h (revision 0)
++++ linux-2.6.22.1/include/linux/gpio_mouse.h (revision 0)
+@@ -0,0 +1,61 @@
++/*
++ * Driver for simulating a mouse on GPIO lines.
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef _GPIO_MOUSE_H
++#define _GPIO_MOUSE_H
++
++#define GPIO_MOUSE_POLARITY_ACT_HIGH 0x00
++#define GPIO_MOUSE_POLARITY_ACT_LOW 0x01
++
++#define GPIO_MOUSE_PIN_UP 0
++#define GPIO_MOUSE_PIN_DOWN 1
++#define GPIO_MOUSE_PIN_LEFT 2
++#define GPIO_MOUSE_PIN_RIGHT 3
++#define GPIO_MOUSE_PIN_BLEFT 4
++#define GPIO_MOUSE_PIN_BMIDDLE 5
++#define GPIO_MOUSE_PIN_BRIGHT 6
++#define GPIO_MOUSE_PIN_MAX 7
++
++/**
++ * struct gpio_mouse_platform_data
++ * @scan_ms: integer in ms specifying the scan periode.
++ * @polarity: Pin polarity, active high or low.
++ * @up: GPIO line for up value.
++ * @down: GPIO line for down value.
++ * @left: GPIO line for left value.
++ * @right: GPIO line for right value.
++ * @bleft: GPIO line for left button.
++ * @bmiddle: GPIO line for middle button.
++ * @bright: GPIO line for right button.
++ *
++ * This struct must be added to the platform_device in the board code.
++ * It is used by the gpio_mouse driver to setup GPIO lines and to
++ * calculate mouse movement.
++ */
++struct gpio_mouse_platform_data {
++ int scan_ms;
++ int polarity;
++
++ union {
++ struct {
++ int up;
++ int down;
++ int left;
++ int right;
++
++ int bleft;
++ int bmiddle;
++ int bright;
++ };
++ int pins[GPIO_MOUSE_PIN_MAX];
++ };
++};
++
++#endif /* _GPIO_MOUSE_H */
+Index: linux-2.6.22.1/include/linux/i2c-id.h
+===================================================================
+--- linux-2.6.22.1/include/linux/i2c-id.h (revision 1)
++++ linux-2.6.22.1/include/linux/i2c-id.h (arbetskopia)
+@@ -203,6 +203,7 @@
+
+ /* --- PCA 9564 based algorithms */
+ #define I2C_HW_A_ISA 0x1a0000 /* generic ISA Bus interface card */
++#define I2C_HW_A_PLAT 0x1a0001 /* generic platform_bus interface */
+
+ /* --- ACPI Embedded controller algorithms */
+ #define I2C_HW_ACPI_EC 0x1f0000
+Index: linux-2.6.22.1/include/asm-avr32/unaligned.h
+===================================================================
+--- linux-2.6.22.1/include/asm-avr32/unaligned.h (revision 1)
++++ linux-2.6.22.1/include/asm-avr32/unaligned.h (arbetskopia)
+@@ -7,19 +7,10 @@
+ * words, but halfwords must be halfword-aligned, and doublewords must
+ * be word-aligned.
+ *
+- * TODO: Make all this CPU-specific and optimize.
++ * However, swapped word loads must be word-aligned so we can't
++ * optimize word loads in general.
+ */
- endmenu
+-#include <linux/string.h>
++#include <asm-generic/unaligned.h>
-+menu "Power managment options"
+-/* Use memmove here, so gcc does not insert a __builtin_memcpy. */
+-
+-#define get_unaligned(ptr) \
+- ({ __typeof__(*(ptr)) __tmp; memmove(&__tmp, (ptr), sizeof(*(ptr))); __tmp; })
+-
+-#define put_unaligned(val, ptr) \
+- ({ __typeof__(*(ptr)) __tmp = (val); \
+- memmove((ptr), &__tmp, sizeof(*(ptr))); \
+- (void)0; })
+-
+ #endif /* __ASM_AVR32_UNALIGNED_H */
+Index: linux-2.6.22.1/include/asm-avr32/atomic.h
+===================================================================
+--- linux-2.6.22.1/include/asm-avr32/atomic.h (revision 1)
++++ linux-2.6.22.1/include/asm-avr32/atomic.h (arbetskopia)
+@@ -101,7 +101,7 @@
+ " mov %1, 1\n"
+ "1:"
+ : "=&r"(tmp), "=&r"(result), "=o"(v->counter)
+- : "m"(v->counter), "rKs21"(a), "rKs21"(u)
++ : "m"(v->counter), "rKs21"(a), "rKs21"(u), "1"(result)
+ : "cc", "memory");
+
+ return result;
+@@ -137,7 +137,7 @@
+ " mov %1, 1\n"
+ "1:"
+ : "=&r"(tmp), "=&r"(result), "=o"(v->counter)
+- : "m"(v->counter), "r"(a), "ir"(u)
++ : "m"(v->counter), "r"(a), "ir"(u), "1"(result)
+ : "cc", "memory");
+ }
+
+Index: linux-2.6.22.1/include/asm-avr32/dma-controller.h
+===================================================================
+--- linux-2.6.22.1/include/asm-avr32/dma-controller.h (revision 0)
++++ linux-2.6.22.1/include/asm-avr32/dma-controller.h (revision 0)
+@@ -0,0 +1,166 @@
++/*
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_AVR32_DMA_CONTROLLER_H
++#define __ASM_AVR32_DMA_CONTROLLER_H
+
-+menu "CPU Frequency scaling"
++#include <linux/device.h>
+
-+source "drivers/cpufreq/Kconfig"
++#define DMA_DIR_MEM_TO_MEM 0x0000
++#define DMA_DIR_MEM_TO_PERIPH 0x0001
++#define DMA_DIR_PERIPH_TO_MEM 0x0002
++#define DMA_DIR_PERIPH_TO_PERIPH 0x0003
+
-+config CPU_FREQ_AT32AP
-+ bool "CPU frequency driver for AT32AP"
-+ depends on CPU_FREQ && PLATFORM_AT32AP
-+ default n
-+ help
-+ This enables the CPU frequency driver for AT32AP processors.
++#define DMA_WIDTH_8BIT 0
++#define DMA_WIDTH_16BIT 1
++#define DMA_WIDTH_32BIT 2
+
-+ For details, take a look in <file:Documentation/cpu-freq>.
++struct dma_request {
++ struct dma_controller *dmac;
++ struct list_head list;
+
-+ If in doubt, say N.
++ unsigned short channel;
+
-+endmenu
++ void (*xfer_complete)(struct dma_request *req);
++ void (*block_complete)(struct dma_request *req);
++ void (*error)(struct dma_request *req);
++};
+
-+endmenu
++struct dma_request_sg {
++ struct dma_request req;
+
- menu "Bus options"
-
- config PCI
-diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
-index dc6bc01..eb72198 100644
---- a/arch/avr32/Makefile
-+++ b/arch/avr32/Makefile
-@@ -31,6 +31,7 @@ core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/
- core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/
- core-y += arch/avr32/kernel/
- core-y += arch/avr32/mm/
-+drivers-y += arch/avr32/drivers/
- libs-y += arch/avr32/lib/
++ int nr_sg;
++ struct scatterlist *sg;
++ unsigned long block_size;
++ unsigned int nr_blocks;
++
++ dma_addr_t data_reg;
++ unsigned short periph_id;
++
++ unsigned char direction;
++ unsigned char width;
++};
++#define to_dma_request_sg(_req) \
++ container_of(_req, struct dma_request_sg, req)
++
++struct dma_request_cyclic {
++ struct dma_request req;
++
++ int periods;
++ unsigned long buffer_size;
++
++ dma_addr_t buffer_start;
++ dma_addr_t data_reg;
++
++ unsigned short periph_id;
++ unsigned char direction;
++ unsigned char width;
++
++ void *dev_id;
++};
++#define to_dma_request_cyclic(_req) \
++ container_of(_req, struct dma_request_cyclic, req)
++
++struct dma_request_memcpy {
++ struct dma_request req;
++
++ dma_addr_t src_addr;
++ unsigned int src_width;
++ unsigned int src_stride;
++
++ dma_addr_t dst_addr;
++ unsigned int dst_width;
++ unsigned int dst_stride;
++
++ size_t length;
++
++ unsigned short src_reverse:1;
++ unsigned short dst_reverse:1;
++};
++#define to_dma_request_memcpy(_req) \
++ container_of(_req, struct dma_request_memcpy, req)
++
++struct dma_controller {
++ struct list_head list;
++ int id;
++ struct device *dev;
++
++ int (*alloc_channel)(struct dma_controller *dmac);
++ void (*release_channel)(struct dma_controller *dmac,
++ int channel);
++ int (*prepare_request_sg)(struct dma_controller *dmac,
++ struct dma_request_sg *req);
++ int (*prepare_request_cyclic)(struct dma_controller *dmac,
++ struct dma_request_cyclic *req);
++ int (*prepare_request_memcpy)(struct dma_controller *dmac,
++ struct dma_request_memcpy *req);
++ int (*start_request)(struct dma_controller *dmac,
++ unsigned int channel);
++ int (*stop_request)(struct dma_controller *dmac,
++ unsigned int channel);
++ dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
++ unsigned int channel);
++};
++
++static inline int
++dma_alloc_channel(struct dma_controller *dmac)
++{
++ return dmac->alloc_channel(dmac);
++}
++
++static inline void
++dma_release_channel(struct dma_controller *dmac, int chan)
++{
++ dmac->release_channel(dmac, chan);
++}
++
++static inline int
++dma_prepare_request_sg(struct dma_controller *dmac,
++ struct dma_request_sg *req)
++{
++ return dmac->prepare_request_sg(dmac, req);
++}
++
++static inline int
++dma_prepare_request_cyclic(struct dma_controller *dmac,
++ struct dma_request_cyclic *req)
++{
++ return dmac->prepare_request_cyclic(dmac, req);
++}
++
++static inline int
++dma_prepare_request_memcpy(struct dma_controller *dmac,
++ struct dma_request_memcpy *req)
++{
++ return dmac->prepare_request_memcpy(dmac, req);
++}
++
++static inline int
++dma_start_request(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->start_request(dmac, channel);
++}
++
++static inline int
++dma_stop_request(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->stop_request(dmac, channel);
++}
++
++static inline dma_addr_t
++dma_get_current_pos(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->get_current_pos(dmac, channel);
++}
++
++extern int register_dma_controller(struct dma_controller *dmac);
++extern struct dma_controller *find_dma_controller(int id);
++
++#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
+Index: linux-2.6.22.1/include/asm-avr32/arch-at32ap/portmux.h
+===================================================================
+--- linux-2.6.22.1/include/asm-avr32/arch-at32ap/portmux.h (revision 1)
++++ linux-2.6.22.1/include/asm-avr32/arch-at32ap/portmux.h (arbetskopia)
+@@ -25,4 +25,16 @@
+ void at32_select_gpio(unsigned int pin, unsigned long flags);
+ void at32_reserve_pin(unsigned int pin);
- archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
-diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig
-new file mode 100644
-index 0000000..5d922df
---- /dev/null
-+++ b/arch/avr32/boards/atngw100/Kconfig
-@@ -0,0 +1,12 @@
-+# NGW100 customization
++#ifdef CONFIG_GPIO_DEV
+
-+config BOARD_ATNGW100_I2C_GPIO
-+ bool "Use GPIO for i2c instead of built-in TWI module"
-+ help
-+ The driver for the built-in TWI module has been plagued by
-+ various problems, while the i2c-gpio driver is based on the
-+ trusty old i2c-algo-bit bitbanging engine, making it work
-+ on pretty much any setup.
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port);
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
++void at32_deselect_pins(unsigned int port, u32 pins);
+
-+ Choose 'Y' here if you're having i2c-related problems and
-+ want to rule out the i2c bus driver.
-diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
-index 6c4dc0a..d649974 100644
---- a/arch/avr32/boards/atngw100/setup.c
-+++ b/arch/avr32/boards/atngw100/setup.c
-@@ -9,10 +9,12 @@
- */
- #include <linux/clk.h>
- #include <linux/etherdevice.h>
-+#include <linux/i2c-gpio.h>
- #include <linux/init.h>
- #include <linux/linkage.h>
- #include <linux/platform_device.h>
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
++
++#endif /* CONFIG_GPIO_DEV */
++
+ #endif /* __ASM_ARCH_PORTMUX_H__ */
+Index: linux-2.6.22.1/include/asm-avr32/arch-at32ap/board.h
+===================================================================
+--- linux-2.6.22.1/include/asm-avr32/arch-at32ap/board.h (revision 1)
++++ linux-2.6.22.1/include/asm-avr32/arch-at32ap/board.h (arbetskopia)
+@@ -6,6 +6,8 @@
+
#include <linux/types.h>
-+#include <linux/leds.h>
- #include <linux/spi/spi.h>
- #include <asm/io.h>
++#define GPIO_PIN_NONE (-1)
++
+ /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
+ void at32_add_system_devices(void);
+
@@ -21,6 +23,7 @@
- #include <asm/arch/at32ap7000.h>
- #include <asm/arch/board.h>
- #include <asm/arch/init.h>
-+#include <asm/arch/portmux.h>
+ struct platform_device *at32_add_device_usart(unsigned int id);
- /* Initialized by bootloader-specific startup code. */
- struct tag *bootloader_tags __initdata;
-@@ -39,6 +42,11 @@ static struct spi_board_info spi0_board_info[] __initdata = {
- },
+ struct eth_platform_data {
++ u32 phy_mask;
+ u8 is_rmii;
};
+ struct platform_device *
+@@ -30,9 +33,41 @@
+ struct platform_device *
+ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
-+static struct mci_platform_data __initdata mci0_data = {
-+ .detect_pin = GPIO_PIN_PC(25),
-+ .wp_pin = GPIO_PIN_PE(0),
++struct platform_device *at32_add_device_twi(unsigned int id);
++
++struct mci_platform_data {
++ int detect_pin;
++ int wp_pin;
+};
++struct platform_device *
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
+
- /*
- * The next two functions should go away as the boot loader is
- * supposed to initialize the macb address registers with a valid
-@@ -100,8 +108,46 @@ void __init setup_board(void)
- at32_setup_serial_console(0);
- }
++struct usba_platform_data {
++ int vbus_pin;
++};
++struct platform_device *
++at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
++
+ struct atmel_lcdfb_info;
+ struct platform_device *
+ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+ unsigned long fbmem_start, unsigned long fbmem_len);
-+static const struct gpio_led ngw_leds[] = {
-+ { .name = "sys", .gpio = GPIO_PIN_PA(16), .active_low = 1,
-+ .default_trigger = "heartbeat",
-+ },
-+ { .name = "a", .gpio = GPIO_PIN_PA(19), .active_low = 1, },
-+ { .name = "b", .gpio = GPIO_PIN_PE(19), .active_low = 1, },
++struct platform_device *at32_add_device_ac97c(unsigned int id);
++struct platform_device *at32_add_device_abdac(unsigned int id);
++
++/* depending on what's hooked up, not all SSC pins will be used */
++#define ATMEL_SSC_TK 0x01
++#define ATMEL_SSC_TF 0x02
++#define ATMEL_SSC_TD 0x04
++#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
++
++#define ATMEL_SSC_RK 0x10
++#define ATMEL_SSC_RF 0x20
++#define ATMEL_SSC_RD 0x40
++#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
++
++struct platform_device *
++at32_add_device_ssc(unsigned int id, unsigned int flags);
++
+ #endif /* __ASM_ARCH_BOARD_H */
+Index: linux-2.6.22.1/scripts/checkstack.pl
+===================================================================
+--- linux-2.6.22.1/scripts/checkstack.pl (revision 1)
++++ linux-2.6.22.1/scripts/checkstack.pl (arbetskopia)
+@@ -12,6 +12,7 @@
+ # sh64 port by Paul Mundt
+ # Random bits by Matt Mackall <mpm@selenic.com>
+ # M68k port by Geert Uytterhoeven and Andreas Schwab
++# AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
+ #
+ # Usage:
+ # objdump -d vmlinux | stackcheck.pl [arch]
+@@ -37,6 +38,10 @@
+ if ($arch eq 'arm') {
+ #c0008ffc: e24dd064 sub sp, sp, #100 ; 0x64
+ $re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
++ } elsif ($arch eq 'avr32') {
++ #8000008a: 20 1d sub sp,4
++ #80000ca8: fa cd 05 b0 sub sp,sp,1456
++ $re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
+ } elsif ($arch =~ /^i[3456]86$/) {
+ #c0105234: 81 ec ac 05 00 00 sub $0x5ac,%esp
+ $re = qr/^.*[as][du][db] \$(0x$x{1,8}),\%esp$/o;
+Index: linux-2.6.22.1/sound/Kconfig
+===================================================================
+--- linux-2.6.22.1/sound/Kconfig (revision 1)
++++ linux-2.6.22.1/sound/Kconfig (arbetskopia)
+@@ -63,9 +63,13 @@
+
+ source "sound/arm/Kconfig"
+
++if SPI
++source "sound/spi/Kconfig"
++endif
++
+ source "sound/mips/Kconfig"
+
+-# the following will depend on the order of config.
++# tee following will depend on the order of config.
+ # here assuming USB is defined before ALSA
+ source "sound/usb/Kconfig"
+
+Index: linux-2.6.22.1/sound/soc/at91/eti_b1_wm8731.c
+===================================================================
+--- linux-2.6.22.1/sound/soc/at91/eti_b1_wm8731.c (revision 1)
++++ linux-2.6.22.1/sound/soc/at91/eti_b1_wm8731.c (arbetskopia)
+@@ -34,8 +34,7 @@
+ #include <sound/soc.h>
+ #include <sound/soc-dapm.h>
+
+-#include <asm/arch/hardware.h>
+-#include <asm/arch/at91_pio.h>
++#include <asm/hardware.h>
+ #include <asm/arch/gpio.h>
+
+ #include "../codecs/wm8731.h"
+@@ -48,13 +47,6 @@
+ #define DBG(x...)
+ #endif
+
+-#define AT91_PIO_TF1 (1 << (AT91_PIN_PB6 - PIN_BASE) % 32)
+-#define AT91_PIO_TK1 (1 << (AT91_PIN_PB7 - PIN_BASE) % 32)
+-#define AT91_PIO_TD1 (1 << (AT91_PIN_PB8 - PIN_BASE) % 32)
+-#define AT91_PIO_RD1 (1 << (AT91_PIN_PB9 - PIN_BASE) % 32)
+-#define AT91_PIO_RK1 (1 << (AT91_PIN_PB10 - PIN_BASE) % 32)
+-#define AT91_PIO_RF1 (1 << (AT91_PIN_PB11 - PIN_BASE) % 32)
+-
+ static struct clk *pck1_clk;
+ static struct clk *pllb_clk;
+
+@@ -277,7 +269,6 @@
+ static int __init eti_b1_init(void)
+ {
+ int ret;
+- u32 ssc_pio_lines;
+ struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data;
+
+ if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) {
+@@ -311,20 +302,13 @@
+ goto fail_io_unmap;
+ }
+
+- ssc_pio_lines = AT91_PIO_TF1 | AT91_PIO_TK1 | AT91_PIO_TD1
+- | AT91_PIO_RD1 /* | AT91_PIO_RK1 */ | AT91_PIO_RF1;
++ at91_set_A_periph(AT91_PIN_PB6, 0); /* TF1 */
++ at91_set_A_periph(AT91_PIN_PB7, 0); /* TK1 */
++ at91_set_A_periph(AT91_PIN_PB8, 0); /* TD1 */
++ at91_set_A_periph(AT91_PIN_PB9, 0); /* RD1 */
++/* at91_set_A_periph(AT91_PIN_PB10, 0);*/ /* RK1 */
++ at91_set_A_periph(AT91_PIN_PB11, 0); /* RF1 */
+
+- /* Reset all PIO registers and assign lines to peripheral A */
+- at91_sys_write(AT91_PIOB + PIO_PDR, ssc_pio_lines);
+- at91_sys_write(AT91_PIOB + PIO_ODR, ssc_pio_lines);
+- at91_sys_write(AT91_PIOB + PIO_IFDR, ssc_pio_lines);
+- at91_sys_write(AT91_PIOB + PIO_CODR, ssc_pio_lines);
+- at91_sys_write(AT91_PIOB + PIO_IDR, ssc_pio_lines);
+- at91_sys_write(AT91_PIOB + PIO_MDDR, ssc_pio_lines);
+- at91_sys_write(AT91_PIOB + PIO_PUDR, ssc_pio_lines);
+- at91_sys_write(AT91_PIOB + PIO_ASR, ssc_pio_lines);
+- at91_sys_write(AT91_PIOB + PIO_OWDR, ssc_pio_lines);
+-
+ /*
+ * Set PCK1 parent to PLLB and its rate to 12 Mhz.
+ */
+Index: linux-2.6.22.1/sound/spi/Kconfig
+===================================================================
+--- linux-2.6.22.1/sound/spi/Kconfig (revision 0)
++++ linux-2.6.22.1/sound/spi/Kconfig (revision 0)
+@@ -0,0 +1,31 @@
++#SPI drivers
++
++menu "SPI devices"
++ depends on SND != n
++
++config SND_AT73C213
++ tristate "Atmel AT73C213 DAC driver"
++ depends on ATMEL_SSC
++ select SND_PCM
++ help
++ Say Y here if you want to use the Atmel AT73C213 external DAC. This
++ DAC can be found on Atmel development boards.
++
++ This driver requires the Atmel SSC driver for sound sink, a
++ peripheral found on most AT91 and AVR32 microprocessors.
++
++ To compile this driver as a module, choose M here: the module will be
++ called snd-at73c213.
++
++config SND_AT73C213_TARGET_BITRATE
++ int "Target bitrate for AT73C213"
++ depends on SND_AT73C213
++ default "48000"
++ range 8000 50000
++ help
++ Sets the target bitrate for the bitrate calculator in the driver.
++ Limited by hardware to be between 8000 Hz and 50000 Hz.
++
++ Set to 48000 Hz by default.
++
++endmenu
+Index: linux-2.6.22.1/sound/spi/at73c213.c
+===================================================================
+--- linux-2.6.22.1/sound/spi/at73c213.c (revision 0)
++++ linux-2.6.22.1/sound/spi/at73c213.c (revision 0)
+@@ -0,0 +1,1121 @@
++/*
++ * Driver for AT73C213 16-bit stereo DAC connected to Atmel SSC
++ *
++ * Copyright (C) 2006-2007 Atmel Norway
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++
++/*#define DEBUG*/
++
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++
++#include <sound/driver.h>
++#include <sound/initval.h>
++#include <sound/control.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++
++#include <linux/atmel-ssc.h>
++
++#include <linux/spi/spi.h>
++#include <linux/spi/at73c213.h>
++
++#include "at73c213.h"
++
++#define BITRATE_MIN 8000 /* Hardware limit? */
++#define BITRATE_TARGET CONFIG_SND_AT73C213_TARGET_BITRATE
++#define BITRATE_MAX 50000 /* Hardware limit. */
++
++/* Initial (hardware reset) AT73C213 register values. */
++static u8 snd_at73c213_original_image[18] =
++{
++ 0x00, /* 00 - CTRL */
++ 0x05, /* 01 - LLIG */
++ 0x05, /* 02 - RLIG */
++ 0x08, /* 03 - LPMG */
++ 0x08, /* 04 - RPMG */
++ 0x00, /* 05 - LLOG */
++ 0x00, /* 06 - RLOG */
++ 0x22, /* 07 - OLC */
++ 0x09, /* 08 - MC */
++ 0x00, /* 09 - CSFC */
++ 0x00, /* 0A - MISC */
++ 0x00, /* 0B - */
++ 0x00, /* 0C - PRECH */
++ 0x05, /* 0D - AUXG */
++ 0x00, /* 0E - */
++ 0x00, /* 0F - */
++ 0x00, /* 10 - RST */
++ 0x00, /* 11 - PA_CTRL */
+};
+
-+static const struct gpio_led_platform_data ngw_led_data = {
-+ .num_leds = ARRAY_SIZE(ngw_leds),
-+ .leds = (void *) ngw_leds,
++struct snd_at73c213 {
++ struct snd_card *card;
++ struct snd_pcm *pcm;
++ struct snd_pcm_substream *substream;
++ struct at73c213_board_info *board;
++ int irq;
++ int period;
++ unsigned long bitrate;
++ struct clk *bitclk;
++ struct ssc_device *ssc;
++ struct spi_device *spi;
++ u8 spi_wbuffer[2];
++ u8 spi_rbuffer[2];
++ /* Image of the SPI registers in AT73C213. */
++ u8 reg_image[18];
++ /* Protect registers against concurrent access. */
++ spinlock_t lock;
+};
+
-+static struct platform_device ngw_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = (void *) &ngw_led_data,
++#define get_chip(card) ((struct snd_at73c213 *)card->private_data)
++
++static int
++snd_at73c213_write_reg(struct snd_at73c213 *chip, u8 reg, u8 val)
++{
++ struct spi_message msg;
++ struct spi_transfer msg_xfer = {
++ .len = 2,
++ .cs_change = 0,
++ };
++ int retval;
++
++ spi_message_init(&msg);
++
++ chip->spi_wbuffer[0] = reg;
++ chip->spi_wbuffer[1] = val;
++
++ msg_xfer.tx_buf = chip->spi_wbuffer;
++ msg_xfer.rx_buf = chip->spi_rbuffer;
++ spi_message_add_tail(&msg_xfer, &msg);
++
++ retval = spi_sync(chip->spi, &msg);
++
++ if (!retval)
++ chip->reg_image[reg] = val;
++
++ return retval;
++}
++
++static struct snd_pcm_hardware snd_at73c213_playback_hw = {
++ .info = SNDRV_PCM_INFO_INTERLEAVED |
++ SNDRV_PCM_INFO_BLOCK_TRANSFER,
++ .formats = SNDRV_PCM_FMTBIT_S16_BE,
++ .rates = SNDRV_PCM_RATE_CONTINUOUS,
++ .rate_min = 8000, /* Replaced by chip->bitrate later. */
++ .rate_max = 50000, /* Replaced by chip->bitrate later. */
++ .channels_min = 2,
++ .channels_max = 2,
++ .buffer_bytes_max = 64 * 1024 - 1,
++ .period_bytes_min = 512,
++ .period_bytes_max = 64 * 1024 - 1,
++ .periods_min = 4,
++ .periods_max = 1024,
++};
++
++/*
++ * Calculate and set bitrate and divisions.
++ */
++static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip)
++{
++ unsigned long ssc_rate = clk_get_rate(chip->ssc->clk);
++ unsigned long dac_rate_new, ssc_div, status;
++ unsigned long ssc_div_max, ssc_div_min;
++ int max_tries;
++
++ /*
++ * We connect two clocks here, picking divisors so the I2S clocks
++ * out data at the same rate the DAC clocks it in ... and as close
++ * as practical to the desired target rate.
++ *
++ * The DAC master clock (MCLK) is programmable, and is either 256
++ * or (not here) 384 times the I2S output clock (BCLK).
++ */
++
++ /* SSC clock / (bitrate * stereo * 16-bit). */
++ ssc_div = ssc_rate / (BITRATE_TARGET * 2 * 16);
++ ssc_div_min = ssc_rate / (BITRATE_MAX * 2 * 16);
++ ssc_div_max = ssc_rate / (BITRATE_MIN * 2 * 16);
++ max_tries = (ssc_div_max - ssc_div_min) / 2;
++
++ if (max_tries < 1)
++ max_tries = 1;
++
++ /* ssc_div must be a power of 2. */
++ ssc_div = (ssc_div + 1) & ~1UL;
++
++ if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) {
++ ssc_div -= 2;
++ if ((ssc_rate / (ssc_div * 2 * 16)) > BITRATE_MAX)
++ return -ENXIO;
++ }
++
++ /* Search for a possible bitrate. */
++ do {
++ /* SSC clock / (ssc divider * 16-bit * stereo). */
++ if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN)
++ return -ENXIO;
++
++ /* 256 / (2 * 16) = 8 */
++ dac_rate_new = 8 * (ssc_rate / ssc_div);
++
++ status = clk_round_rate(chip->board->dac_clk, dac_rate_new);
++ if (status < 0)
++ return status;
++
++ /* Ignore difference smaller than 256 Hz. */
++ if ((status/256) == (dac_rate_new/256))
++ goto set_rate;
++
++ ssc_div += 2;
++ } while (--max_tries);
++
++ /* Not able to find a valid bitrate. */
++ return -ENXIO;
++
++set_rate:
++ status = clk_set_rate(chip->board->dac_clk, status);
++ if (status < 0)
++ return status;
++
++ /* Set divider in SSC device. */
++ ssc_writel(chip->ssc->regs, CMR, ssc_div/2);
++
++ /* SSC clock / (ssc divider * 16-bit * stereo). */
++ chip->bitrate = ssc_rate / (ssc_div * 16 * 2);
++
++ dev_info(&chip->spi->dev,
++ "at73c213: supported bitrate is %lu (%lu divider)\n",
++ chip->bitrate, ssc_div);
++
++ return 0;
++}
++
++static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++
++ snd_at73c213_playback_hw.rate_min = chip->bitrate;
++ snd_at73c213_playback_hw.rate_max = chip->bitrate;
++ runtime->hw = snd_at73c213_playback_hw;
++ chip->substream = substream;
++
++ return 0;
++}
++
++static int snd_at73c213_pcm_close(struct snd_pcm_substream *substream)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ chip->substream = NULL;
++ return 0;
++}
++
++static int snd_at73c213_pcm_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *hw_params)
++{
++ return snd_pcm_lib_malloc_pages(substream,
++ params_buffer_bytes(hw_params));
++}
++
++static int snd_at73c213_pcm_hw_free(struct snd_pcm_substream *substream)
++{
++ return snd_pcm_lib_free_pages(substream);
++}
++
++static int snd_at73c213_pcm_prepare(struct snd_pcm_substream *substream)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ int block_size;
++
++ block_size = frames_to_bytes(runtime, runtime->period_size);
++
++ chip->period = 0;
++
++ ssc_writel(chip->ssc->regs, PDC_TPR,
++ (long)runtime->dma_addr);
++ ssc_writel(chip->ssc->regs, PDC_TCR, runtime->period_size * 2);
++ ssc_writel(chip->ssc->regs, PDC_TNPR,
++ (long)runtime->dma_addr + block_size);
++ ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
++
++ return 0;
++}
++
++static int snd_at73c213_pcm_trigger(struct snd_pcm_substream *substream,
++ int cmd)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ int retval = 0;
++
++ spin_lock(&chip->lock);
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ ssc_writel(chip->ssc->regs, IER, SSC_BIT(IER_ENDTX));
++ ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTEN));
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTDIS));
++ ssc_writel(chip->ssc->regs, IDR, SSC_BIT(IDR_ENDTX));
++ break;
++ default:
++ dev_dbg(&chip->spi->dev, "spurious command %x\n", cmd);
++ retval = -EINVAL;
++ break;
+ }
++
++ spin_unlock(&chip->lock);
++
++ return retval;
++}
++
++static snd_pcm_uframes_t
++snd_at73c213_pcm_pointer(struct snd_pcm_substream *substream)
++{
++ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ snd_pcm_uframes_t pos;
++ unsigned long bytes;
++
++ bytes = ssc_readl(chip->ssc->regs, PDC_TPR)
++ - (unsigned long)runtime->dma_addr;
++
++ pos = bytes_to_frames(runtime, bytes);
++ if (pos >= runtime->buffer_size)
++ pos -= runtime->buffer_size;
++
++ return pos;
++}
++
++static struct snd_pcm_ops at73c213_playback_ops = {
++ .open = snd_at73c213_pcm_open,
++ .close = snd_at73c213_pcm_close,
++ .ioctl = snd_pcm_lib_ioctl,
++ .hw_params = snd_at73c213_pcm_hw_params,
++ .hw_free = snd_at73c213_pcm_hw_free,
++ .prepare = snd_at73c213_pcm_prepare,
++ .trigger = snd_at73c213_pcm_trigger,
++ .pointer = snd_at73c213_pcm_pointer,
+};
+
-+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
-+static struct i2c_gpio_platform_data i2c_gpio_data = {
-+ .sda_pin = GPIO_PIN_PA(6),
-+ .scl_pin = GPIO_PIN_PA(7),
++static void snd_at73c213_pcm_free(struct snd_pcm *pcm)
++{
++ struct snd_at73c213 *chip = snd_pcm_chip(pcm);
++ if (chip->pcm) {
++ snd_pcm_lib_preallocate_free_for_all(chip->pcm);
++ chip->pcm = NULL;
++ }
++}
++
++static int __devinit snd_at73c213_pcm_new(struct snd_at73c213 *chip, int device)
++{
++ struct snd_pcm *pcm;
++ int retval;
++
++ retval = snd_pcm_new(chip->card, chip->card->shortname,
++ device, 1, 0, &pcm);
++ if (retval < 0)
++ goto out;
++
++ pcm->private_data = chip;
++ pcm->private_free = snd_at73c213_pcm_free;
++ pcm->info_flags = SNDRV_PCM_INFO_BLOCK_TRANSFER;
++ strcpy(pcm->name, "at73c213");
++ chip->pcm = pcm;
++
++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &at73c213_playback_ops);
++
++ retval = snd_pcm_lib_preallocate_pages_for_all(chip->pcm,
++ SNDRV_DMA_TYPE_DEV, &chip->ssc->pdev->dev,
++ 64 * 1024, 64 * 1024);
++out:
++ return retval;
++}
++
++static irqreturn_t snd_at73c213_interrupt(int irq, void *dev_id)
++{
++ struct snd_at73c213 *chip = dev_id;
++ struct snd_pcm_runtime *runtime = chip->substream->runtime;
++ u32 status;
++ int offset;
++ int block_size;
++ int next_period;
++ int retval = IRQ_NONE;
++
++ spin_lock(&chip->lock);
++
++ block_size = frames_to_bytes(runtime, runtime->period_size);
++ status = ssc_readl(chip->ssc->regs, IMR);
++
++ if (status & SSC_BIT(IMR_ENDTX)) {
++ chip->period++;
++ if (chip->period == runtime->periods)
++ chip->period = 0;
++ next_period = chip->period + 1;
++ if (next_period == runtime->periods)
++ next_period = 0;
++
++ offset = block_size * next_period;
++
++ ssc_writel(chip->ssc->regs, PDC_TNPR,
++ (long)runtime->dma_addr + offset);
++ ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
++ retval = IRQ_HANDLED;
++ }
++
++ ssc_readl(chip->ssc->regs, IMR);
++ spin_unlock(&chip->lock);
++
++ if (status & SSC_BIT(IMR_ENDTX))
++ snd_pcm_period_elapsed(chip->substream);
++
++ return retval;
++}
++
++/*
++ * Mixer functions.
++ */
++static int snd_at73c213_mono_get(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ int reg = kcontrol->private_value & 0xff;
++ int shift = (kcontrol->private_value >> 8) & 0xff;
++ int mask = (kcontrol->private_value >> 16) & 0xff;
++ int invert = (kcontrol->private_value >> 24) & 0xff;
++
++ spin_lock_irq(&chip->lock);
++
++ ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & mask;
++
++ if (invert)
++ ucontrol->value.integer.value[0] =
++ (mask - ucontrol->value.integer.value[0]);
++
++ spin_unlock_irq(&chip->lock);
++
++ return 0;
++}
++
++static int snd_at73c213_mono_put(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ int reg = kcontrol->private_value & 0xff;
++ int shift = (kcontrol->private_value >> 8) & 0xff;
++ int mask = (kcontrol->private_value >> 16) & 0xff;
++ int invert = (kcontrol->private_value >> 24) & 0xff;
++ int change, retval;
++ unsigned short val;
++
++ val = (ucontrol->value.integer.value[0] & mask);
++ if (invert)
++ val = mask - val;
++ val <<= shift;
++
++ spin_lock_irq(&chip->lock);
++
++ val = (chip->reg_image[reg] & ~(mask << shift)) | val;
++ change = val != chip->reg_image[reg];
++ retval = snd_at73c213_write_reg(chip, reg, val);
++
++ spin_unlock_irq(&chip->lock);
++
++ if (retval)
++ return retval;
++
++ return change;
++}
++
++static int snd_at73c213_stereo_info(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ int mask = (kcontrol->private_value >> 24) & 0xff;
++
++ if (mask == 1)
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
++ else
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++
++ uinfo->count = 2;
++ uinfo->value.integer.min = 0;
++ uinfo->value.integer.max = mask;
++
++ return 0;
++}
++
++static int snd_at73c213_stereo_get(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ int left_reg = kcontrol->private_value & 0xff;
++ int right_reg = (kcontrol->private_value >> 8) & 0xff;
++ int shift_left = (kcontrol->private_value >> 16) & 0x07;
++ int shift_right = (kcontrol->private_value >> 19) & 0x07;
++ int mask = (kcontrol->private_value >> 24) & 0xff;
++ int invert = (kcontrol->private_value >> 22) & 1;
++
++ spin_lock_irq(&chip->lock);
++
++ ucontrol->value.integer.value[0] =
++ (chip->reg_image[left_reg] >> shift_left) & mask;
++ ucontrol->value.integer.value[1] =
++ (chip->reg_image[right_reg] >> shift_right) & mask;
++
++ if (invert) {
++ ucontrol->value.integer.value[0] =
++ (mask - ucontrol->value.integer.value[0]);
++ ucontrol->value.integer.value[1] =
++ (mask - ucontrol->value.integer.value[1]);
++ }
++
++ spin_unlock_irq(&chip->lock);
++
++ return 0;
++}
++
++static int snd_at73c213_stereo_put(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ int left_reg = kcontrol->private_value & 0xff;
++ int right_reg = (kcontrol->private_value >> 8) & 0xff;
++ int shift_left = (kcontrol->private_value >> 16) & 0x07;
++ int shift_right = (kcontrol->private_value >> 19) & 0x07;
++ int mask = (kcontrol->private_value >> 24) & 0xff;
++ int invert = (kcontrol->private_value >> 22) & 1;
++ int change, retval;
++ unsigned short val1, val2;
++
++ val1 = ucontrol->value.integer.value[0] & mask;
++ val2 = ucontrol->value.integer.value[1] & mask;
++ if (invert) {
++ val1 = mask - val1;
++ val2 = mask - val2;
++ }
++ val1 <<= shift_left;
++ val2 <<= shift_right;
++
++ spin_lock_irq(&chip->lock);
++
++ val1 = (chip->reg_image[left_reg] & ~(mask << shift_left)) | val1;
++ val2 = (chip->reg_image[right_reg] & ~(mask << shift_right)) | val2;
++ change = val1 != chip->reg_image[left_reg]
++ || val2 != chip->reg_image[right_reg];
++ retval = snd_at73c213_write_reg(chip, left_reg, val1);
++ if (retval) {
++ spin_unlock_irq(&chip->lock);
++ goto out;
++ }
++ retval = snd_at73c213_write_reg(chip, right_reg, val2);
++ if (retval) {
++ spin_unlock_irq(&chip->lock);
++ goto out;
++ }
++
++ spin_unlock_irq(&chip->lock);
++
++ return change;
++
++out:
++ return retval;
++}
++
++static int snd_at73c213_mono_switch_info(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
++ uinfo->count = 1;
++ uinfo->value.integer.min = 0;
++ uinfo->value.integer.max = 1;
++
++ return 0;
++}
++
++static int snd_at73c213_mono_switch_get(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ int reg = kcontrol->private_value & 0xff;
++ int shift = (kcontrol->private_value >> 8) & 0xff;
++ int invert = (kcontrol->private_value >> 24) & 0xff;
++
++ spin_lock_irq(&chip->lock);
++
++ ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & 0x01;
++
++ if (invert)
++ ucontrol->value.integer.value[0] =
++ (0x01 - ucontrol->value.integer.value[0]);
++
++ spin_unlock_irq(&chip->lock);
++
++ return 0;
++}
++
++static int snd_at73c213_mono_switch_put(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
++ int reg = kcontrol->private_value & 0xff;
++ int shift = (kcontrol->private_value >> 8) & 0xff;
++ int mask = (kcontrol->private_value >> 16) & 0xff;
++ int invert = (kcontrol->private_value >> 24) & 0xff;
++ int change, retval;
++ unsigned short val;
++
++ if (ucontrol->value.integer.value[0])
++ val = mask;
++ else
++ val = 0;
++
++ if (invert)
++ val = mask - val;
++ val <<= shift;
++
++ spin_lock_irq(&chip->lock);
++
++ val |= (chip->reg_image[reg] & ~(mask << shift));
++ change = val != chip->reg_image[reg];
++
++ retval = snd_at73c213_write_reg(chip, reg, val);
++
++ spin_unlock_irq(&chip->lock);
++
++ if (retval)
++ return retval;
++
++ return change;
++}
++
++static int snd_at73c213_pa_volume_info(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++ uinfo->count = 1;
++ uinfo->value.integer.min = 0;
++ uinfo->value.integer.max = ((kcontrol->private_value >> 16) & 0xff) - 1;
++
++ return 0;
++}
++
++static int snd_at73c213_line_capture_volume_info(
++ struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++ uinfo->count = 2;
++ /* When inverted will give values 0x10001 => 0. */
++ uinfo->value.integer.min = 14;
++ uinfo->value.integer.max = 31;
++
++ return 0;
++}
++
++static int snd_at73c213_aux_capture_volume_info(
++ struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++ uinfo->count = 1;
++ /* When inverted will give values 0x10001 => 0. */
++ uinfo->value.integer.min = 14;
++ uinfo->value.integer.max = 31;
++
++ return 0;
++}
++
++#define AT73C213_MONO_SWITCH(xname, xindex, reg, shift, mask, invert) \
++{ \
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
++ .name = xname, \
++ .index = xindex, \
++ .info = snd_at73c213_mono_switch_info, \
++ .get = snd_at73c213_mono_switch_get, \
++ .put = snd_at73c213_mono_switch_put, \
++ .private_value = (reg | (shift << 8) | (mask << 16) | (invert << 24)) \
++}
++
++#define AT73C213_STEREO(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
++{ \
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
++ .name = xname, \
++ .index = xindex, \
++ .info = snd_at73c213_stereo_info, \
++ .get = snd_at73c213_stereo_get, \
++ .put = snd_at73c213_stereo_put, \
++ .private_value = (left_reg | (right_reg << 8) \
++ | (shift_left << 16) | (shift_right << 19) \
++ | (mask << 24) | (invert << 22)) \
++}
++
++static struct snd_kcontrol_new snd_at73c213_controls[] __devinitdata = {
++AT73C213_STEREO("Master Playback Volume", 0, DAC_LMPG, DAC_RMPG, 0, 0, 0x1f, 1),
++AT73C213_STEREO("Master Playback Switch", 0, DAC_LMPG, DAC_RMPG, 5, 5, 1, 1),
++AT73C213_STEREO("PCM Playback Volume", 0, DAC_LLOG, DAC_RLOG, 0, 0, 0x1f, 1),
++AT73C213_STEREO("PCM Playback Switch", 0, DAC_LLOG, DAC_RLOG, 5, 5, 1, 1),
++AT73C213_MONO_SWITCH("Mono PA Playback Switch", 0, DAC_CTRL, DAC_CTRL_ONPADRV, 0x01, 0),
++{
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++ .name = "PA Playback Volume",
++ .index = 0,
++ .info = snd_at73c213_pa_volume_info,
++ .get = snd_at73c213_mono_get,
++ .put = snd_at73c213_mono_put,
++ .private_value = PA_CTRL | (PA_CTRL_APAGAIN << 8) | (0x0f << 16) | (1 << 24),
++},
++AT73C213_MONO_SWITCH("PA High Gain Playback Switch", 0, PA_CTRL, PA_CTRL_APALP, 0x01, 1),
++AT73C213_MONO_SWITCH("PA Playback Switch", 0, PA_CTRL, PA_CTRL_APAON, 0x01, 0),
++{
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++ .name = "Aux Capture Volume",
++ .index = 0,
++ .info = snd_at73c213_aux_capture_volume_info,
++ .get = snd_at73c213_mono_get,
++ .put = snd_at73c213_mono_put,
++ .private_value = DAC_AUXG | (0 << 8) | (0x1f << 16) | (1 << 24),
++},
++AT73C213_MONO_SWITCH("Aux Capture Switch", 0, DAC_CTRL, DAC_CTRL_ONAUXIN, 0x01, 0),
++{
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++ .name = "Line Capture Volume",
++ .index = 0,
++ .info = snd_at73c213_line_capture_volume_info,
++ .get = snd_at73c213_stereo_get,
++ .put = snd_at73c213_stereo_put,
++ .private_value = DAC_LLIG | (DAC_RLIG << 8) | (0 << 16) | (0 << 19)
++ | (0x1f << 24) | (1 << 22),
++},
++AT73C213_MONO_SWITCH("Line Capture Switch", 0, DAC_CTRL, 0, 0x03, 0),
+};
+
-+static struct platform_device i2c_gpio_device = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &i2c_gpio_data,
++static int __devinit snd_at73c213_mixer(struct snd_at73c213 *chip)
++{
++ struct snd_card *card;
++ int errval, idx;
++
++ if (chip == NULL || chip->pcm == NULL)
++ return -EINVAL;
++
++ card = chip->card;
++
++ strcpy(card->mixername, chip->pcm->name);
++
++ for (idx = 0; idx < ARRAY_SIZE(snd_at73c213_controls); idx++) {
++ errval = snd_ctl_add(card,
++ snd_ctl_new1(&snd_at73c213_controls[idx],
++ chip));
++ if (errval < 0)
++ goto cleanup;
++ }
++
++ return 0;
++
++cleanup:
++ for (idx = 1; idx < ARRAY_SIZE(snd_at73c213_controls) + 1; idx++) {
++ struct snd_kcontrol *kctl;
++ kctl = snd_ctl_find_numid(card, idx);
++ if (kctl)
++ snd_ctl_remove(card, kctl);
++ }
++ return errval;
++}
++
++/*
++ * Device functions
++ */
++static int snd_at73c213_ssc_init(struct snd_at73c213 *chip)
++{
++ /*
++ * Continuous clock output.
++ * Starts on falling TF.
++ * Delay 1 cycle (1 bit).
++ * Periode is 16 bit (16 - 1).
++ */
++ ssc_writel(chip->ssc->regs, TCMR,
++ SSC_BF(TCMR_CKO, 1)
++ | SSC_BF(TCMR_START, 4)
++ | SSC_BF(TCMR_STTDLY, 1)
++ | SSC_BF(TCMR_PERIOD, 16 - 1));
++ /*
++ * Data length is 16 bit (16 - 1).
++ * Transmit MSB first.
++ * Transmit 2 words each transfer.
++ * Frame sync length is 16 bit (16 - 1).
++ * Frame starts on negative pulse.
++ */
++ ssc_writel(chip->ssc->regs, TFMR,
++ SSC_BF(TFMR_DATLEN, 16 - 1)
++ | SSC_BIT(TFMR_MSBF)
++ | SSC_BF(TFMR_DATNB, 1)
++ | SSC_BF(TFMR_FSLEN, 16 - 1)
++ | SSC_BF(TFMR_FSOS, 1));
++
++ return 0;
++}
++
++static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
++{
++ int retval;
++ unsigned char dac_ctrl = 0;
++
++ retval = snd_at73c213_set_bitrate(chip);
++ if (retval)
++ goto out;
++
++ /* Enable DAC master clock. */
++ clk_enable(chip->board->dac_clk);
++
++ /* Initialize at73c213 on SPI bus. */
++ retval = snd_at73c213_write_reg(chip, DAC_RST, 0x04);
++ if (retval)
++ goto out_clk;
++ msleep(1);
++ retval = snd_at73c213_write_reg(chip, DAC_RST, 0x03);
++ if (retval)
++ goto out_clk;
++
++ /* Precharge everything. */
++ retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0xff);
++ if (retval)
++ goto out_clk;
++ retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APAPRECH));
++ if (retval)
++ goto out_clk;
++ retval = snd_at73c213_write_reg(chip, DAC_CTRL,
++ (1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR));
++ if (retval)
++ goto out_clk;
++
++ msleep(50);
++
++ /* Stop precharging PA. */
++ retval = snd_at73c213_write_reg(chip, PA_CTRL,
++ (1<<PA_CTRL_APALP) | 0x0f);
++ if (retval)
++ goto out_clk;
++
++ msleep(450);
++
++ /* Stop precharging DAC, turn on master power. */
++ retval = snd_at73c213_write_reg(chip, DAC_PRECH, (1<<DAC_PRECH_ONMSTR));
++ if (retval)
++ goto out_clk;
++
++ msleep(1);
++
++ /* Turn on DAC. */
++ dac_ctrl = (1<<DAC_CTRL_ONDACL) | (1<<DAC_CTRL_ONDACR)
++ | (1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR);
++
++ retval = snd_at73c213_write_reg(chip, DAC_CTRL, dac_ctrl);
++ if (retval)
++ goto out_clk;
++
++ /* Mute sound. */
++ retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
++ if (retval)
++ goto out_clk;
++ retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
++ if (retval)
++ goto out_clk;
++ retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
++ if (retval)
++ goto out_clk;
++ retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
++ if (retval)
++ goto out_clk;
++ retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
++ if (retval)
++ goto out_clk;
++ retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
++ if (retval)
++ goto out_clk;
++ retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
++ if (retval)
++ goto out_clk;
++
++ /* Enable I2S device, i.e. clock output. */
++ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
++
++ goto out;
++
++out_clk:
++ clk_disable(chip->board->dac_clk);
++out:
++ return retval;
++}
++
++static int snd_at73c213_dev_free(struct snd_device *device)
++{
++ struct snd_at73c213 *chip = device->device_data;
++
++ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
++ if (chip->irq >= 0) {
++ free_irq(chip->irq, chip);
++ chip->irq = -1;
++ }
++
++ return 0;
++}
++
++static int __devinit snd_at73c213_dev_init(struct snd_card *card,
++ struct spi_device *spi)
++{
++ static struct snd_device_ops ops = {
++ .dev_free = snd_at73c213_dev_free,
++ };
++ struct snd_at73c213 *chip = get_chip(card);
++ int irq, retval;
++
++ irq = chip->ssc->irq;
++ if (irq < 0)
++ return irq;
++
++ spin_lock_init(&chip->lock);
++ chip->card = card;
++ chip->irq = -1;
++
++ retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip);
++ if (retval) {
++ dev_dbg(&chip->spi->dev, "unable to request irq %d\n", irq);
++ goto out;
++ }
++ chip->irq = irq;
++
++ memcpy(&chip->reg_image, &snd_at73c213_original_image,
++ sizeof(snd_at73c213_original_image));
++
++ retval = snd_at73c213_ssc_init(chip);
++ if (retval)
++ goto out_irq;
++
++ retval = snd_at73c213_chip_init(chip);
++ if (retval)
++ goto out_irq;
++
++ retval = snd_at73c213_pcm_new(chip, 0);
++ if (retval)
++ goto out_irq;
++
++ retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
++ if (retval)
++ goto out_irq;
++
++ retval = snd_at73c213_mixer(chip);
++ if (retval)
++ goto out_snd_dev;
++
++ snd_card_set_dev(card, &spi->dev);
++
++ goto out;
++
++out_snd_dev:
++ snd_device_free(card, chip);
++out_irq:
++ free_irq(chip->irq, chip);
++ chip->irq = -1;
++out:
++ return retval;
++}
++
++static int snd_at73c213_probe(struct spi_device *spi)
++{
++ struct snd_card *card;
++ struct snd_at73c213 *chip;
++ struct at73c213_board_info *board;
++ int retval;
++ char id[16];
++
++ board = spi->dev.platform_data;
++ if (!board) {
++ dev_dbg(&spi->dev, "no platform_data\n");
++ return -ENXIO;
++ }
++
++ if (!board->dac_clk) {
++ dev_dbg(&spi->dev, "no DAC clk\n");
++ return -ENXIO;
++ }
++
++ if (IS_ERR(board->dac_clk)) {
++ dev_dbg(&spi->dev, "no DAC clk\n");
++ return PTR_ERR(board->dac_clk);
++ }
++
++ retval = -ENOMEM;
++
++ /* Allocate "card" using some unused identifiers. */
++ snprintf(id, sizeof id, "at73c213_%d", board->ssc_id);
++ card = snd_card_new(-1, id, THIS_MODULE, sizeof(struct snd_at73c213));
++ if (!card)
++ goto out;
++
++ chip = card->private_data;
++ chip->spi = spi;
++ chip->board = board;
++
++ chip->ssc = ssc_request(board->ssc_id);
++ if (IS_ERR(chip->ssc)) {
++ dev_dbg(&spi->dev, "could not get ssc%d device\n",
++ board->ssc_id);
++ retval = PTR_ERR(chip->ssc);
++ goto out_card;
++ }
++
++ retval = snd_at73c213_dev_init(card, spi);
++ if (retval)
++ goto out_ssc;
++
++ strcpy(card->driver, "at73c213");
++ strcpy(card->shortname, board->shortname);
++ sprintf(card->longname, "%s on irq %d", card->shortname, chip->irq);
++
++ retval = snd_card_register(card);
++ if (retval)
++ goto out_ssc;
++
++ dev_set_drvdata(&spi->dev, card);
++
++ goto out;
++
++out_ssc:
++ ssc_free(chip->ssc);
++out_card:
++ snd_card_free(card);
++out:
++ return retval;
++}
++
++static int __devexit snd_at73c213_remove(struct spi_device *spi)
++{
++ struct snd_card *card = dev_get_drvdata(&spi->dev);
++ struct snd_at73c213 *chip = card->private_data;
++ int retval;
++
++ /* Stop playback. */
++ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
++
++ /* Mute sound. */
++ retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
++ if (retval)
++ goto out;
++ retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
++ if (retval)
++ goto out;
++ retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
++ if (retval)
++ goto out;
++ retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
++ if (retval)
++ goto out;
++ retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
++ if (retval)
++ goto out;
++ retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
++ if (retval)
++ goto out;
++ retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
++ if (retval)
++ goto out;
++
++ /* Turn off PA. */
++ retval = snd_at73c213_write_reg(chip, PA_CTRL, (chip->reg_image[PA_CTRL]|0x0f));
++ if (retval)
++ goto out;
++ msleep(10);
++ retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0f);
++ if (retval)
++ goto out;
++
++ /* Turn off external DAC. */
++ retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x0c);
++ if (retval)
++ goto out;
++ msleep(2);
++ retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x00);
++ if (retval)
++ goto out;
++
++ /* Turn off master power. */
++ retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0x00);
++ if (retval)
++ goto out;
++
++out:
++ /* Stop DAC master clock. */
++ clk_disable(chip->board->dac_clk);
++
++ ssc_free(chip->ssc);
++ snd_card_free(card);
++ dev_set_drvdata(&spi->dev, NULL);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++static int snd_at73c213_suspend(struct spi_device *spi, pm_message_t msg)
++{
++ struct snd_card *card = dev_get_drvdata(&spi->dev);
++ struct snd_at73c213 *chip = card->private_data;
++
++ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
++ clk_disable(chip->board->dac_clk);
++
++ return 0;
++}
++
++static int snd_at73c213_resume(struct spi_device *spi)
++{
++ struct snd_card *card = dev_get_drvdata(&spi->dev);
++ struct snd_at73c213 *chip = card->private_data;
++
++ clk_enable(chip->board->dac_clk);
++ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
++
++ return 0;
++}
++#else
++#define snd_at73c213_suspend NULL
++#define snd_at73c213_resume NULL
++#endif
++
++static struct spi_driver at73c213_driver = {
++ .driver = {
++ .name = "at73c213",
+ },
++ .probe = snd_at73c213_probe,
++ .suspend = snd_at73c213_suspend,
++ .resume = snd_at73c213_resume,
++ .remove = __devexit_p(snd_at73c213_remove),
+};
-+#endif
+
- static int __init atngw100_init(void)
- {
-+ unsigned i;
++static int __init at73c213_init(void)
++{
++ return spi_register_driver(&at73c213_driver);
++}
++module_init(at73c213_init);
+
- /*
- * ATNGW100 uses 16-bit SDRAM interface, so we don't need to
- * reserve any pins for it.
-@@ -115,6 +161,22 @@ static int __init atngw100_init(void)
- set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
++static void __exit at73c213_exit(void)
++{
++ spi_unregister_driver(&at73c213_driver);
++}
++module_exit(at73c213_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("Sound driver for AT73C213 with Atmel SSC");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.22.1/sound/spi/Makefile
+===================================================================
+--- linux-2.6.22.1/sound/spi/Makefile (revision 0)
++++ linux-2.6.22.1/sound/spi/Makefile (revision 0)
+@@ -0,0 +1,5 @@
++# Makefile for SPI drivers
++
++snd-at73c213-objs := at73c213.o
++
++obj-$(CONFIG_SND_AT73C213) += snd-at73c213.o
+Index: linux-2.6.22.1/sound/spi/at73c213.h
+===================================================================
+--- linux-2.6.22.1/sound/spi/at73c213.h (revision 0)
++++ linux-2.6.22.1/sound/spi/at73c213.h (revision 0)
+@@ -0,0 +1,119 @@
++/*
++ * Driver for the AT73C213 16-bit stereo DAC on Atmel ATSTK1000
++ *
++ * Copyright (C) 2006 - 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++ * 02111-1307, USA.
++ *
++ * The full GNU General Public License is included in this
++ * distribution in the file called COPYING.
++ */
++
++#ifndef _SND_AT73C213_H
++#define _SND_AT73C213_H
++
++/* DAC control register */
++#define DAC_CTRL 0x00
++#define DAC_CTRL_ONPADRV 7
++#define DAC_CTRL_ONAUXIN 6
++#define DAC_CTRL_ONDACR 5
++#define DAC_CTRL_ONDACL 4
++#define DAC_CTRL_ONLNOR 3
++#define DAC_CTRL_ONLNOL 2
++#define DAC_CTRL_ONLNIR 1
++#define DAC_CTRL_ONLNIL 0
++
++/* DAC left line in gain register */
++#define DAC_LLIG 0x01
++#define DAC_LLIG_LLIG 0
++
++/* DAC right line in gain register */
++#define DAC_RLIG 0x02
++#define DAC_RLIG_RLIG 0
++
++/* DAC Left Master Playback Gain Register */
++#define DAC_LMPG 0x03
++#define DAC_LMPG_LMPG 0
++
++/* DAC Right Master Playback Gain Register */
++#define DAC_RMPG 0x04
++#define DAC_RMPG_RMPG 0
++
++/* DAC Left Line Out Gain Register */
++#define DAC_LLOG 0x05
++#define DAC_LLOG_LLOG 0
++
++/* DAC Right Line Out Gain Register */
++#define DAC_RLOG 0x06
++#define DAC_RLOG_RLOG 0
++
++/* DAC Output Level Control Register */
++#define DAC_OLC 0x07
++#define DAC_OLC_RSHORT 7
++#define DAC_OLC_ROLC 4
++#define DAC_OLC_LSHORT 3
++#define DAC_OLC_LOLC 0
++
++/* DAC Mixer Control Register */
++#define DAC_MC 0x08
++#define DAC_MC_INVR 5
++#define DAC_MC_INVL 4
++#define DAC_MC_RMSMIN2 3
++#define DAC_MC_RMSMIN1 2
++#define DAC_MC_LMSMIN2 1
++#define DAC_MC_LMSMIN1 0
++
++/* DAC Clock and Sampling Frequency Control Register */
++#define DAC_CSFC 0x09
++#define DAC_CSFC_OVRSEL 4
++
++/* DAC Miscellaneous Register */
++#define DAC_MISC 0x0A
++#define DAC_MISC_VCMCAPSEL 7
++#define DAC_MISC_DINTSEL 4
++#define DAC_MISC_DITHEN 3
++#define DAC_MISC_DEEMPEN 2
++#define DAC_MISC_NBITS 0
++
++/* DAC Precharge Control Register */
++#define DAC_PRECH 0x0C
++#define DAC_PRECH_PRCHGPDRV 7
++#define DAC_PRECH_PRCHGAUX1 6
++#define DAC_PRECH_PRCHGLNOR 5
++#define DAC_PRECH_PRCHGLNOL 4
++#define DAC_PRECH_PRCHGLNIR 3
++#define DAC_PRECH_PRCHGLNIL 2
++#define DAC_PRECH_PRCHG 1
++#define DAC_PRECH_ONMSTR 0
++
++/* DAC Auxiliary Input Gain Control Register */
++#define DAC_AUXG 0x0D
++#define DAC_AUXG_AUXG 0
++
++/* DAC Reset Register */
++#define DAC_RST 0x10
++#define DAC_RST_RESMASK 2
++#define DAC_RST_RESFILZ 1
++#define DAC_RST_RSTZ 0
++
++/* Power Amplifier Control Register */
++#define PA_CTRL 0x11
++#define PA_CTRL_APAON 6
++#define PA_CTRL_APAPRECH 5
++#define PA_CTRL_APALP 4
++#define PA_CTRL_APAGAIN 0
++
++#endif /* _SND_AT73C213_H */
+Index: linux-2.6.22.1/sound/Makefile
+===================================================================
+--- linux-2.6.22.1/sound/Makefile (revision 1)
++++ linux-2.6.22.1/sound/Makefile (arbetskopia)
+@@ -5,7 +5,8 @@
+ obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o
+ obj-$(CONFIG_SOUND_PRIME) += oss/
+ obj-$(CONFIG_DMASOUND) += oss/
+-obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/ soc/
++obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ \
++ sparc/ spi/ parisc/ pcmcia/ mips/ soc/
+ obj-$(CONFIG_SND_AOA) += aoa/
- at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-+ at32_add_device_mci(0, &mci0_data);
-+ at32_add_device_usba(0, NULL);
+ # This one must be compilable even if sound is configured out
+Index: linux-2.6.22.1/init/do_mounts.c
+===================================================================
+--- linux-2.6.22.1/init/do_mounts.c (revision 1)
++++ linux-2.6.22.1/init/do_mounts.c (arbetskopia)
+@@ -25,6 +25,7 @@
+ int root_mountflags = MS_RDONLY | MS_SILENT;
+ char * __initdata root_device_name;
+ static char __initdata saved_root_name[64];
++int __initdata root_wait;
+
+ dev_t ROOT_DEV;
+
+@@ -216,6 +217,14 @@
+
+ __setup("root=", root_dev_setup);
+
++static int __init rootwait_setup(char *line)
++{
++ root_wait = simple_strtol(line,NULL,0);
++ return 1;
++}
+
-+ for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
-+ at32_select_gpio(ngw_leds[i].gpio,
-+ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
++__setup("rootwait=", rootwait_setup);
++
+ static char * __initdata root_mount_data;
+ static int __init root_data_setup(char *str)
+ {
+@@ -438,11 +447,24 @@
+ root_device_name += 5;
+ }
+
+- is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
+-
+ if (initrd_load())
+ goto out;
+
++ /* wait for any asynchronous scanning to complete */
++ if ((ROOT_DEV == 0) && root_wait) {
++ printk(KERN_INFO "Waiting for root device %s...\n",
++ saved_root_name);
++ do {
++ while (driver_probe_done() != 0)
++ msleep(100);
++ ROOT_DEV = name_to_dev_t(saved_root_name);
++ if (ROOT_DEV == 0)
++ msleep(100);
++ } while (ROOT_DEV == 0);
+ }
-+ platform_device_register(&ngw_gpio_leds);
+
-+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
-+ at32_select_gpio(i2c_gpio_data.sda_pin, 0);
-+ at32_select_gpio(i2c_gpio_data.scl_pin, 0);
-+ platform_device_register(&i2c_gpio_device);
-+#else
-+ at32_add_device_twi(0);
-+#endif
++ is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
++
+ if (is_floppy && rd_doload && rd_load_disk(0))
+ ROOT_DEV = Root_RAM0;
- return 0;
- }
-diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
-new file mode 100644
-index 0000000..718578f
---- /dev/null
-+++ b/arch/avr32/boards/atstk1000/Kconfig
-@@ -0,0 +1,79 @@
-+# STK1000 customization
+Index: linux-2.6.22.1/MAINTAINERS
+===================================================================
+--- linux-2.6.22.1/MAINTAINERS (revision 1)
++++ linux-2.6.22.1/MAINTAINERS (arbetskopia)
+@@ -674,6 +674,13 @@
+ M: hskinnemoen@atmel.com
+ S: Supported
+
++ATMEL USBA UDC DRIVER
++P: Haavard Skinnemoen
++M: hskinnemoen@atmel.com
++L: kernel@avr32linux.org
++W: http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
++S: Supported
+
-+if BOARD_ATSTK1002
+ ATMEL WIRELESS DRIVER
+ P: Simon Kelley
+ M: simon@thekelleys.org.uk
+Index: linux-2.6.22.1/arch/arm/boot/compressed/head-at91rm9200.S
+===================================================================
+--- linux-2.6.22.1/arch/arm/boot/compressed/head-at91rm9200.S (revision 1)
++++ linux-2.6.22.1/arch/arm/boot/compressed/head-at91rm9200.S (arbetskopia)
+@@ -73,6 +73,12 @@
+ cmp r7, r3
+ beq 99f
+
++ @ Promwad Chub : 1181
++ mov r3, #(MACH_TYPE_CHUB & 0xff)
++ orr r3, r3, #(MACH_TYPE_CHUB & 0xff00)
++ cmp r7, r3
++ beq 99f
++
+ @ Unknown board, use the AT91RM9200DK board
+ @ mov r7, #MACH_TYPE_AT91RM9200
+ mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff)
+Index: linux-2.6.22.1/arch/arm/mach-at91/board-kb9202.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/board-kb9202.c (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/board-kb9202.c (arbetskopia)
+@@ -37,6 +37,8 @@
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
+
++#include <asm/arch/at91rm9200_mc.h>
+
-+config BOARD_ATSTK1002_CUSTOM
-+ bool "Non-default STK-1002 jumper settings"
+ #include "generic.h"
+
+
+@@ -111,6 +113,48 @@
+ .partition_info = nand_partitions,
+ };
+
++
++#if defined(CONFIG_FB_S1D15605)
++#warning "Rather pass reset pin via platform_data"
++static struct resource kb9202_lcd_resources[] = {
++ [0] = {
++ .start = AT91_CHIPSELECT_2,
++ .end = AT91_CHIPSELECT_2 + 0x200FF,
++ .flags = IORESOURCE_MEM
++ },
++ [1] = { /* reset pin */
++ .start = AT91_PIN_PC22,
++ .end = AT91_PIN_PC22,
++ .flags = IORESOURCE_MEM
++ },
++};
++
++static struct platform_device kb9202_lcd_device = {
++ .name = "s1d15605fb",
++ .id = 0,
++ .num_resources = ARRAY_SIZE(kb9202_lcd_resources),
++ .resource = kb9202_lcd_resources,
++};
++
++static void __init kb9202_add_device_lcd(void)
++{
++ /* In case the boot loader did not set the chip select mode and timing */
++ at91_sys_write(AT91_SMC_CSR(2),
++ AT91_SMC_WSEN | AT91_SMC_NWS_(18) | AT91_SMC_TDF_(1) | AT91_SMC_DBW_8 |
++ AT91_SMC_RWSETUP_(1) | AT91_SMC_RWHOLD_(1));
++
++ /* Backlight pin = output, off */
++ at91_set_gpio_output(AT91_PIN_PC23, 0);
++
++ /* Reset pin = output, in reset */
++ at91_set_gpio_output(AT91_PIN_PC22, 0);
++
++ platform_device_register(&kb9202_lcd_device);
++}
++#else
++static void __init kb9202_add_device_lcd(void) {}
++#endif
++
+ static void __init kb9202_board_init(void)
+ {
+ /* Serial */
+@@ -129,6 +173,8 @@
+ at91_add_device_spi(NULL, 0);
+ /* NAND */
+ at91_add_device_nand(&kb9202_nand_data);
++ /* LCD */
++ kb9202_add_device_lcd();
+ }
+
+ MACHINE_START(KB9200, "KB920x")
+Index: linux-2.6.22.1/arch/arm/mach-at91/Kconfig
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/Kconfig (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/Kconfig (arbetskopia)
+@@ -97,6 +97,12 @@
+ help
+ Select this if you are using Sperry-Sun's KAFA board.
+
++config MACH_CHUB
++ bool "Promwad Chub board"
++ depends on ARCH_AT91RM9200
+ help
-+ You will normally leave the jumpers on the CPU card at their
-+ default settings. If you need to use certain peripherals,
-+ you will need to change some of those jumpers.
++ Select this if you are using Promwad's Chub board.
+
-+if BOARD_ATSTK1002_CUSTOM
+ endif
+
+ # ----------------------------------------------------------
+@@ -121,6 +127,13 @@
+ Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+
++config MACH_CAM60
++ bool "KwikByte CAM60 board"
++ depends on ARCH_AT91SAM9260
++ help
++ Select this if you are using KwikByte's CAM60 board based on the Atmel AT91SAM9260.
++ <http://www.kwikbyte.com>
+
-+config BOARD_ATSTK1002_SW1_CUSTOM
-+ bool "SW1: use SSC1 (not SPI0)"
+ endif
+
+ # ----------------------------------------------------------
+@@ -184,6 +197,20 @@
+ On AT91SAM926x boards both types of NAND flash can be present
+ (8 and 16 bit data bus width).
+
++config CSB300_WAKE_SW0
++ bool "CSB300 SW0 irq0 wakeup"
++ depends on MACH_CSB337 && PM
+ help
-+ This also prevents using the external DAC as an audio interface,
-+ and means you can't initialize the on-board QVGA display.
++ If you have a CSB300 connected to your CSB337, this lets
++ SW0 serve as a wakeup button. It uses IRQ0.
+
-+config BOARD_ATSTK1002_SW2_CUSTOM
-+ bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
++config CSB300_WAKE_SW1
++ bool "CSB300 SW1 gpio wakeup"
++ depends on MACH_CSB337 && PM
+ help
-+ If you change this you'll want an updated boot loader putting
-+ the console on UART-C not UART-A.
++ If you have a CSB300 connected to your CSB337, this lets
++ SW1 serve as a wakeup button. It uses GPIO.
+
-+config BOARD_ATSTK1002_SW3_CUSTOM
-+ bool "SW3: use TIMER1 (not SSC0 and GCLK)"
+ # ----------------------------------------------------------
+
+ comment "AT91 Feature Selections"
+@@ -194,6 +221,20 @@
+ Select this if you need to program one or more of the PCK0..PCK3
+ programmable clock outputs.
+
++config ATMEL_TCLIB
++ bool "Timer/Counter Library"
+ help
-+ This also prevents using the external DAC as an audio interface.
++ Select this if you want a library to allocate the Timer/Counter
++ blocks found on many Atmel processors. This facilitates using
++ these modules despite processor differences.
+
-+config BOARD_ATSTK1002_SW4_CUSTOM
-+ bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
++config AT91_SLOW_CLOCK
++ bool "Suspend-to-RAM uses slow clock mode (EXPERIMENTAL)"
++ depends on PM && EXPERIMENTAL
+ help
-+ To use the camera interface you'll need a custom card (on the
-+ PCI-format connector) connect a video sensor.
++ Select this if you wish to put the CPU into slow clock mode
++ while in the "Suspend to RAM" state, to save more power.
+
-+config BOARD_ATSTK1002_SW5_CUSTOM
-+ bool "SW5: use MACB1 (not LCDC)"
+ endmenu
+
+ endif
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91sam9260.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91sam9260.c (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9260.c (arbetskopia)
+@@ -269,6 +269,33 @@
+
+
+ /* --------------------------------------------------------------------
++ * Timer/Counter library initialization
++ * -------------------------------------------------------------------- */
++#ifdef CONFIG_ATMEL_TCLIB
+
-+config BOARD_ATSTK1002_SW6_CUSTOM
-+ bool "SW6: more GPIOs (not MACB0)"
++#include "tclib.h"
+
-+endif # custom
++static struct atmel_tcblock at91sam9260_tcblocks[] = {
++ [0] = {
++ .physaddr = AT91SAM9260_BASE_TCB0,
++ .irq = { AT91SAM9260_ID_TC0, AT91SAM9260_ID_TC1, AT91SAM9260_ID_TC2 },
++ .clk = { &tc0_clk, &tc1_clk, &tc2_clk },
++ },
++ [1] = {
++ .physaddr = AT91SAM9260_BASE_TCB1,
++ .irq = { AT91SAM9260_ID_TC3, AT91SAM9260_ID_TC4, AT91SAM9260_ID_TC5 },
++ .clk = { &tc3_clk, &tc4_clk, &tc5_clk },
++ },
++};
+
-+config BOARD_ATSTK1002_SPI1
-+ bool "Configure SPI1 controller"
-+ depends on !BOARD_ATSTK1002_SW4_CUSTOM
-+ help
-+ All the signals for the second SPI controller are available on
-+ GPIO lines and accessed through the J1 jumper block. Say "y"
-+ here to configure that SPI controller.
++#define at91sam9260_tc_init() atmel_tc_init(at91sam9260_tcblocks, ARRAY_SIZE(at91sam9260_tcblocks))
+
-+config BOARD_ATSTK1002_J2_LED
-+ bool
-+ default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
++#else
++#define at91sam9260_tc_init() do {} while(0)
++#endif
+
-+choice
-+ prompt "LEDs connected to J2:"
-+ depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM
-+ optional
-+ help
-+ Select this if you have jumpered the J2 jumper block to the
-+ LED0..LED7 amber leds, or to the RGB leds, using a ten-pin
-+ IDC cable. A default "heartbeat" trigger is provided, but
-+ you can of course override this.
+
-+config BOARD_ATSTK1002_J2_LED8
-+ bool "LED0..LED7"
-+ help
-+ Select this if J2 is jumpered to LED0..LED7 amber leds.
++/* --------------------------------------------------------------------
+ * AT91SAM9260 processor initialization
+ * -------------------------------------------------------------------- */
+
+@@ -315,6 +342,9 @@
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91sam9260_gpio, 3);
+
-+config BOARD_ATSTK1002_J2_RGB
-+ bool "RGB leds"
-+ help
-+ Select this if J2 is jumpered to the RGB leds.
++ /* Initialize the Timer/Counter blocks */
++ at91sam9260_tc_init();
+ }
+
+ /* --------------------------------------------------------------------
+@@ -327,30 +357,30 @@
+ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller */
+ 7, /* System Peripherals */
+- 0, /* Parallel IO Controller A */
+- 0, /* Parallel IO Controller B */
+- 0, /* Parallel IO Controller C */
++ 1, /* Parallel IO Controller A */
++ 1, /* Parallel IO Controller B */
++ 1, /* Parallel IO Controller C */
+ 0, /* Analog-to-Digital Converter */
+- 6, /* USART 0 */
+- 6, /* USART 1 */
+- 6, /* USART 2 */
++ 5, /* USART 0 */
++ 5, /* USART 1 */
++ 5, /* USART 2 */
+ 0, /* Multimedia Card Interface */
+- 4, /* USB Device Port */
+- 0, /* Two-Wire Interface */
+- 6, /* Serial Peripheral Interface 0 */
+- 6, /* Serial Peripheral Interface 1 */
++ 2, /* USB Device Port */
++ 6, /* Two-Wire Interface */
++ 5, /* Serial Peripheral Interface 0 */
++ 5, /* Serial Peripheral Interface 1 */
+ 5, /* Serial Synchronous Controller */
+ 0,
+ 0,
+ 0, /* Timer Counter 0 */
+ 0, /* Timer Counter 1 */
+ 0, /* Timer Counter 2 */
+- 3, /* USB Host port */
++ 2, /* USB Host port */
+ 3, /* Ethernet */
+ 0, /* Image Sensor Interface */
+- 6, /* USART 3 */
+- 6, /* USART 4 */
+- 6, /* USART 5 */
++ 5, /* USART 3 */
++ 5, /* USART 4 */
++ 5, /* USART 5 */
+ 0, /* Timer Counter 3 */
+ 0, /* Timer Counter 4 */
+ 0, /* Timer Counter 5 */
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91sam9261.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91sam9261.c (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9261.c (arbetskopia)
+@@ -247,6 +247,28 @@
+
+
+ /* --------------------------------------------------------------------
++ * Timer/Counter library initialization
++ * -------------------------------------------------------------------- */
++#ifdef CONFIG_ATMEL_TCLIB
+
-+endchoice
++#include "tclib.h"
+
-+endif # stk 1002
-diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
-index e253e86..c958fd4 100644
---- a/arch/avr32/boards/atstk1000/atstk1002.c
-+++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -11,10 +11,12 @@
- #include <linux/etherdevice.h>
- #include <linux/init.h>
- #include <linux/kernel.h>
-+#include <linux/leds.h>
++static struct atmel_tcblock at91sam9261_tcblocks[] = {
++ [0] = {
++ .physaddr = AT91SAM9261_BASE_TCB0,
++ .irq = { AT91SAM9261_ID_TC0, AT91SAM9261_ID_TC1, AT91SAM9261_ID_TC2 },
++ .clk = { &tc0_clk, &tc1_clk, &tc2_clk },
++ }
++};
++
++#define at91sam9261_tc_init() atmel_tc_init(at91sam9261_tcblocks, ARRAY_SIZE(at91sam9261_tcblocks))
++
++#else
++#define at91sam9261_tc_init() do {} while(0)
++#endif
++
++
++/* --------------------------------------------------------------------
+ * AT91SAM9261 processor initialization
+ * -------------------------------------------------------------------- */
+
+@@ -267,6 +289,9 @@
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91sam9261_gpio, 3);
++
++ /* Initialize the Timer/Counter blocks */
++ at91sam9261_tc_init();
+ }
+
+ /* --------------------------------------------------------------------
+@@ -279,25 +304,25 @@
+ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller */
+ 7, /* System Peripherals */
+- 0, /* Parallel IO Controller A */
+- 0, /* Parallel IO Controller B */
+- 0, /* Parallel IO Controller C */
++ 1, /* Parallel IO Controller A */
++ 1, /* Parallel IO Controller B */
++ 1, /* Parallel IO Controller C */
+ 0,
+- 6, /* USART 0 */
+- 6, /* USART 1 */
+- 6, /* USART 2 */
++ 5, /* USART 0 */
++ 5, /* USART 1 */
++ 5, /* USART 2 */
+ 0, /* Multimedia Card Interface */
+- 4, /* USB Device Port */
+- 0, /* Two-Wire Interface */
+- 6, /* Serial Peripheral Interface 0 */
+- 6, /* Serial Peripheral Interface 1 */
+- 5, /* Serial Synchronous Controller 0 */
+- 5, /* Serial Synchronous Controller 1 */
+- 5, /* Serial Synchronous Controller 2 */
++ 2, /* USB Device Port */
++ 6, /* Two-Wire Interface */
++ 5, /* Serial Peripheral Interface 0 */
++ 5, /* Serial Peripheral Interface 1 */
++ 4, /* Serial Synchronous Controller 0 */
++ 4, /* Serial Synchronous Controller 1 */
++ 4, /* Serial Synchronous Controller 2 */
+ 0, /* Timer Counter 0 */
+ 0, /* Timer Counter 1 */
+ 0, /* Timer Counter 2 */
+- 3, /* USB Host port */
++ 2, /* USB Host port */
+ 3, /* LCD Controller */
+ 0,
+ 0,
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91sam9260_devices.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91sam9260_devices.c (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9260_devices.c (arbetskopia)
+@@ -524,6 +524,32 @@
+ #endif
+
+
++#if defined(CONFIG_NEW_LEDS)
++
++static struct platform_device at91_leds = {
++ .name = "at91_leds",
++ .id = -1,
++};
++
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
++{
++ if (!nr)
++ return;
++
++ at91_leds.dev.platform_data = leds;
++
++ for ( ; nr; nr--, leds++) {
++ leds->index = nr; /* first record stores number of leds */
++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
++ }
++
++ platform_device_register(&at91_leds);
++}
++#else
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
++#endif
++
++
+ /* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91sam9261_devices.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91sam9261_devices.c (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9261_devices.c (arbetskopia)
+@@ -14,7 +14,10 @@
+ #include <asm/mach/map.h>
+
#include <linux/platform_device.h>
- #include <linux/string.h>
- #include <linux/types.h>
- #include <linux/spi/spi.h>
-+#include <linux/spi/at73c213.h>
++#include <linux/fb.h>
- #include <video/atmel_lcdc.h>
++#include <video/atmel_lcdc.h>
++
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
+ #include <asm/arch/at91sam9261.h>
+@@ -522,6 +525,32 @@
+ #endif
-@@ -27,16 +29,47 @@
- #include "atstk1000.h"
++#if defined(CONFIG_NEW_LEDS)
++
++static struct platform_device at91_leds = {
++ .name = "at91_leds",
++ .id = -1,
++};
++
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
++{
++ if (!nr)
++ return;
++
++ at91_leds.dev.platform_data = leds;
++
++ for ( ; nr; nr--, leds++) {
++ leds->index = nr; /* first record stores number of leds */
++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
++ }
++
++ platform_device_register(&at91_leds);
++}
++#else
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
++#endif
++
++
+ /* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91sam9263.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91sam9263.c (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9263.c (arbetskopia)
+@@ -273,6 +273,28 @@
--#define SW2_DEFAULT /* MMCI and UART_A available */
- struct eth_addr {
- u8 addr[6];
+ /* --------------------------------------------------------------------
++ * Timer/Counter library initialization
++ * -------------------------------------------------------------------- */
++#ifdef CONFIG_ATMEL_TCLIB
++
++#include "tclib.h"
++
++static struct atmel_tcblock at91sam9263_tcblocks[] = {
++ [0] = {
++ .physaddr = AT91SAM9263_BASE_TCB0,
++ .irq = { AT91SAM9263_ID_TCB, AT91SAM9263_ID_TCB, AT91SAM9263_ID_TCB },
++ .clk = { &tcb_clk, &tcb_clk, &tcb_clk },
++ }
++};
++
++#define at91sam9263_tc_init() atmel_tc_init(at91sam9263_tcblocks, ARRAY_SIZE(at91sam9263_tcblocks))
++
++#else
++#define at91sam9263_tc_init() do {} while(0)
++#endif
++
++
++/* --------------------------------------------------------------------
+ * AT91SAM9263 processor initialization
+ * -------------------------------------------------------------------- */
+
+@@ -292,6 +314,9 @@
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91sam9263_gpio, 5);
++
++ /* Initialize the Timer/Counter blocks */
++ at91sam9263_tc_init();
+ }
+
+ /* --------------------------------------------------------------------
+@@ -304,34 +329,34 @@
+ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller (FIQ) */
+ 7, /* System Peripherals */
+- 0, /* Parallel IO Controller A */
+- 0, /* Parallel IO Controller B */
+- 0, /* Parallel IO Controller C, D and E */
++ 1, /* Parallel IO Controller A */
++ 1, /* Parallel IO Controller B */
++ 1, /* Parallel IO Controller C, D and E */
+ 0,
+ 0,
+- 6, /* USART 0 */
+- 6, /* USART 1 */
+- 6, /* USART 2 */
++ 5, /* USART 0 */
++ 5, /* USART 1 */
++ 5, /* USART 2 */
+ 0, /* Multimedia Card Interface 0 */
+ 0, /* Multimedia Card Interface 1 */
+- 4, /* CAN */
+- 0, /* Two-Wire Interface */
+- 6, /* Serial Peripheral Interface 0 */
+- 6, /* Serial Peripheral Interface 1 */
+- 5, /* Serial Synchronous Controller 0 */
+- 5, /* Serial Synchronous Controller 1 */
+- 6, /* AC97 Controller */
++ 3, /* CAN */
++ 6, /* Two-Wire Interface */
++ 5, /* Serial Peripheral Interface 0 */
++ 5, /* Serial Peripheral Interface 1 */
++ 4, /* Serial Synchronous Controller 0 */
++ 4, /* Serial Synchronous Controller 1 */
++ 5, /* AC97 Controller */
+ 0, /* Timer Counter 0, 1 and 2 */
+ 0, /* Pulse Width Modulation Controller */
+ 3, /* Ethernet */
+ 0,
+ 0, /* 2D Graphic Engine */
+- 3, /* USB Device Port */
++ 2, /* USB Device Port */
+ 0, /* Image Sensor Interface */
+ 3, /* LDC Controller */
+ 0, /* DMA Controller */
+ 0,
+- 3, /* USB Host port */
++ 2, /* USB Host port */
+ 0, /* Advanced Interrupt Controller (IRQ0) */
+ 0, /* Advanced Interrupt Controller (IRQ1) */
};
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91sam9263_devices.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91sam9263_devices.c (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9263_devices.c (arbetskopia)
+@@ -13,7 +13,10 @@
+ #include <asm/mach/map.h>
- static struct eth_addr __initdata hw_addr[2];
--static struct eth_platform_data __initdata eth_data[2];
-+static struct eth_platform_data __initdata eth_data[2] = {
-+ {
-+ /*
-+ * The MDIO pullups on STK1000 are a bit too weak for
-+ * the autodetection to work properly, so we have to
-+ * mask out everything but the correct address.
-+ */
-+ .phy_mask = ~(1U << 16),
+ #include <linux/platform_device.h>
++#include <linux/fb.h>
+
++#include <video/atmel_lcdc.h>
++
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
+ #include <asm/arch/at91sam9263.h>
+@@ -625,6 +628,56 @@
+
+
+ /* --------------------------------------------------------------------
++ * Image Sensor Interface
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
++
++struct resource isi_resources[] = {
++ [0] = {
++ .start = AT91SAM9263_BASE_ISI,
++ .end = AT91SAM9263_BASE_ISI + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
+ },
-+ {
-+ .phy_mask = ~(1U << 17),
++ [1] = {
++ .start = AT91SAM9263_ID_ISI,
++ .end = AT91SAM9263_ID_ISI,
++ .flags = IORESOURCE_IRQ,
+ },
+};
+
-+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-+static struct at73c213_board_info at73c213_data = {
-+ .ssc_id = 0,
-+ .shortname = "AVR32 STK1000 external DAC",
++static struct platform_device at91sam9263_isi_device = {
++ .name = "at91_isi",
++ .id = -1,
++ .resource = isi_resources,
++ .num_resources = ARRAY_SIZE(isi_resources),
+};
++
++void __init at91_add_device_isi(void)
++{
++ at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
++ at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
++ at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */
++ at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */
++ at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */
++ at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */
++ at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */
++ at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */
++ at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
++ at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
++ at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
++ at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
++ at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
++ at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
++ at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
++ at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
++}
++#else
++void __init at91_add_device_isi(void) {}
+#endif
-+#endif
++
++
++/* --------------------------------------------------------------------
+ * LCD Controller
+ * -------------------------------------------------------------------- */
-+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
- static struct spi_board_info spi0_board_info[] __initdata = {
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
+@@ -715,6 +768,32 @@
+ #endif
+
+
++#if defined(CONFIG_NEW_LEDS)
++
++static struct platform_device at91_leds = {
++ .name = "at91_leds",
++ .id = -1,
++};
++
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
++{
++ if (!nr)
++ return;
++
++ at91_leds.dev.platform_data = leds;
++
++ for ( ; nr; nr--, leds++) {
++ leds->index = nr; /* first record stores number of leds */
++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
++ }
++
++ platform_device_register(&at91_leds);
++}
++#else
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
++#endif
++
++
+ /* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+Index: linux-2.6.22.1/arch/arm/mach-at91/board-chub.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/board-chub.c (revision 0)
++++ linux-2.6.22.1/arch/arm/mach-at91/board-chub.c (revision 0)
+@@ -0,0 +1,132 @@
++/*
++ * linux/arch/arm/mach-at91/board-chub.c
++ *
++ * Copyright (C) 2005 SAN People, adapted for Promwad Chub board
++ * by Kuten Ivan
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <asm/hardware.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++#include "generic.h"
++
++/*
++ * Serial port configuration.
++ * 0 .. 3 = USART0 .. USART3
++ * 4 = DBGU
++ */
++static struct at91_uart_config __initdata chub_uart_config = {
++ .console_tty = 0, /* ttyS0 */
++ .nr_tty = 5,
++ .tty_map = { 4, 0, 1, 2, 3 } /* ttyS0, ..., ttyS4 */
++};
++
++static void __init chub_init_irq(void)
++{
++ at91rm9200_init_interrupts(NULL);
++}
++
++static void __init chub_map_io(void)
++{
++ /* Initialize clocks: 18.432 MHz crystal */
++ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
++
++ /* Setup the serial ports and console */
++ at91_init_serial(&chub_uart_config);
++}
++
++static struct at91_eth_data __initdata chub_eth_data = {
++ .phy_irq_pin = AT91_PIN_PB29,
++ .is_rmii = 0,
++};
++
++static struct mtd_partition __initdata chub_nand_partition[] = {
+ {
-+ /* AT73C213 */
-+ .modalias = "at73c213",
-+ .max_speed_hz = 200000,
++ .name = "NAND Partition 1",
++ .offset = 0,
++ .size = MTDPART_SIZ_FULL,
++ },
++};
++
++static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
++{
++ *num_partitions = ARRAY_SIZE(chub_nand_partition);
++ return chub_nand_partition;
++}
++
++static struct at91_nand_data __initdata chub_nand_data = {
++ .ale = 22,
++ .cle = 21,
++ .enable_pin = AT91_PIN_PA27,
++ .partition_info = nand_partitions,
++};
++
++static struct spi_board_info chub_spi_devices[] = {
++ { /* DataFlash chip */
++ .modalias = "mtd_dataflash",
+ .chip_select = 0,
-+ .mode = SPI_MODE_1,
-+ .platform_data = &at73c213_data,
++ .max_speed_hz = 15 * 1000 * 1000,
+ },
-+#endif
- {
- /* QVGA display */
- .modalias = "ltv350qv",
-@@ -45,6 +78,18 @@ static struct spi_board_info spi0_board_info[] __initdata = {
- .mode = SPI_MODE_3,
++};
++
++static void __init chub_board_init(void)
++{
++ /* Serial */
++ at91_add_device_serial();
++ /* I2C */
++ at91_add_device_i2c();
++ /* Ethernet */
++ at91_add_device_eth(&chub_eth_data);
++ /* SPI */
++ at91_add_device_spi(chub_spi_devices, ARRAY_SIZE(chub_spi_devices));
++ /* NAND Flash */
++ at91_add_device_nand(&chub_nand_data);
++ /* Disable write protect for NAND */
++ at91_set_gpio_output(AT91_PIN_PB7, 1);
++ /* Power enable for 3x RS-232 and 1x RS-485 */
++ at91_set_gpio_output(AT91_PIN_PB9, 1);
++ /* Disable write protect for FRAM */
++ at91_set_gpio_output(AT91_PIN_PA21, 1);
++ /* Disable write protect for Dataflash */
++ at91_set_gpio_output(AT91_PIN_PA19, 1);
++}
++
++MACHINE_START(CHUB, "Promwad Chub")
++ /* Maintainer: Ivan Kuten AT Promwad DOT com */
++ .phys_io = AT91_BASE_SYS,
++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
++ .boot_params = AT91_SDRAM_BASE + 0x100,
++ .timer = &at91rm9200_timer,
++ .map_io = chub_map_io,
++ .init_irq = chub_init_irq,
++ .init_machine = chub_board_init,
++MACHINE_END
+Index: linux-2.6.22.1/arch/arm/mach-at91/board-sam9261ek.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/board-sam9261ek.c (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/board-sam9261ek.c (arbetskopia)
+@@ -27,7 +27,10 @@
+ #include <linux/spi/spi.h>
+ #include <linux/spi/ads7846.h>
+ #include <linux/dm9000.h>
++#include <linux/fb.h>
+
++#include <video/atmel_lcdc.h>
++
+ #include <asm/hardware.h>
+ #include <asm/setup.h>
+ #include <asm/mach-types.h>
+@@ -251,6 +254,7 @@
+ .bus_num = 0,
+ .platform_data = &ads_info,
+ .irq = AT91SAM9261_ID_IRQ0,
++ .controller_data = AT91_PIN_PA28, /* CS pin */
},
+ #endif
+ #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+@@ -271,6 +275,65 @@
};
-+#endif
+
+
++/*
++ * LCD Controller
++ */
++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
++static struct fb_videomode at91_tft_vga_modes[] = {
++ {
++ .name = "TX09D50VM1CCA @ 60",
++ .refresh = 60,
++ .xres = 240, .yres = 320,
++ .pixclock = KHZ2PICOS(4965),
+
-+#ifdef CONFIG_BOARD_ATSTK1002_SPI1
-+static struct spi_board_info spi1_board_info[] __initdata = { {
-+ /* patch in custom entries here */
-+} };
-+#endif
++ .left_margin = 1, .right_margin = 33,
++ .upper_margin = 1, .lower_margin = 0,
++ .hsync_len = 5, .vsync_len = 1,
+
-+static struct mci_platform_data __initdata mci0_data = {
-+ .detect_pin = GPIO_PIN_NONE,
-+ .wp_pin = GPIO_PIN_NONE,
++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ .vmode = FB_VMODE_NONINTERLACED,
++ },
+};
-
- /*
- * The next two functions should go away as the boot loader is
-@@ -101,12 +146,103 @@ static void __init set_hw_addr(struct platform_device *pdev)
- clk_put(pclk);
++
++static struct fb_monspecs at91fb_default_monspecs = {
++ .manufacturer = "HIT",
++ .monitor = "TX09D50VM1CCA",
++
++ .modedb = at91_tft_vga_modes,
++ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
++ .hfmin = 15000,
++ .hfmax = 64000,
++ .vfmin = 50,
++ .vfmax = 150,
++};
++
++#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
++ | ATMEL_LCDC_DISTYPE_TFT \
++ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
++
++static void at91_lcdc_power_control(int on)
++{
++ if (on)
++ at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */
++ else
++ at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */
++}
++
++/* Driver datas */
++static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
++ .default_bpp = 16,
++ .default_dmacon = ATMEL_LCDC_DMAEN,
++ .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2,
++ .default_monspecs = &at91fb_default_monspecs,
++ .atmel_lcdfb_power_control = at91_lcdc_power_control,
++ .guard_time = 1,
++};
++
++#else
++static struct atmel_lcdfb_info __initdata ek_lcdc_data;
++#endif
++
++
+ static void __init ek_board_init(void)
+ {
+ /* Serial */
+@@ -296,6 +359,8 @@
+ /* MMC */
+ at91_add_device_mmc(0, &ek_mmc_data);
+ #endif
++ /* LCD Controller */
++ at91_add_device_lcdc(&ek_lcdc_data);
}
--void __init setup_board(void)
-+#ifdef CONFIG_BOARD_ATSTK1002_J2_LED
+ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
+Index: linux-2.6.22.1/arch/arm/mach-at91/board-sam9263ek.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/board-sam9263ek.c (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/board-sam9263ek.c (arbetskopia)
+@@ -26,7 +26,10 @@
+ #include <linux/platform_device.h>
+ #include <linux/spi/spi.h>
+ #include <linux/spi/ads7846.h>
++#include <linux/fb.h>
+
++#include <video/atmel_lcdc.h>
+
-+static struct gpio_led stk_j2_led[] = {
-+#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8
-+#define LEDSTRING "J2 jumpered to LED8"
-+ { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
-+ { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
-+ { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
-+ { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
-+ { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
-+ { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
-+ { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
-+ { .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
-+ .default_trigger = "heartbeat", },
-+#else /* RGB */
-+#define LEDSTRING "J2 jumpered to RGB LEDs"
-+ { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), },
-+ { .name = "g1:green", .gpio = GPIO_PIN_PB(10), },
-+ { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), },
+ #include <asm/hardware.h>
+ #include <asm/setup.h>
+ #include <asm/mach-types.h>
+@@ -202,6 +205,65 @@
+
+
+ /*
++ * LCD Controller
++ */
++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
++static struct fb_videomode at91_tft_vga_modes[] = {
++ {
++ .name = "TX09D50VM1CCA @ 60",
++ .refresh = 60,
++ .xres = 240, .yres = 320,
++ .pixclock = KHZ2PICOS(4965),
+
-+ { .name = "r2:red", .gpio = GPIO_PIN_PB( 9),
-+ .default_trigger = "heartbeat", },
-+ { .name = "g2:green", .gpio = GPIO_PIN_PB(13), },
-+ { .name = "b2:blue", .gpio = GPIO_PIN_PB(15),
-+ .default_trigger = "heartbeat", },
-+ /* PB16, PB30 unused */
++ .left_margin = 1, .right_margin = 33,
++ .upper_margin = 1, .lower_margin = 0,
++ .hsync_len = 5, .vsync_len = 1,
++
++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ .vmode = FB_VMODE_NONINTERLACED,
++ },
++};
++
++static struct fb_monspecs at91fb_default_monspecs = {
++ .manufacturer = "HIT",
++ .monitor = "TX09D70VM1CCA",
++
++ .modedb = at91_tft_vga_modes,
++ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
++ .hfmin = 15000,
++ .hfmax = 64000,
++ .vfmin = 50,
++ .vfmax = 150,
++};
++
++#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
++ | ATMEL_LCDC_DISTYPE_TFT \
++ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
++
++static void at91_lcdc_power_control(int on)
++{
++ if (on)
++ at91_set_gpio_value(AT91_PIN_PD12, 0); /* power up */
++ else
++ at91_set_gpio_value(AT91_PIN_PD12, 1); /* power down */
++}
++
++/* Driver datas */
++static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
++ .default_bpp = 16,
++ .default_dmacon = ATMEL_LCDC_DMAEN,
++ .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2,
++ .default_monspecs = &at91fb_default_monspecs,
++ .atmel_lcdfb_power_control = at91_lcdc_power_control,
++ .guard_time = 1,
++};
++
++#else
++static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+#endif
++
++
++/*
+ * AC97
+ */
+ static struct atmel_ac97_data ek_ac97_data = {
+@@ -230,6 +292,8 @@
+ at91_add_device_nand(&ek_nand_data);
+ /* I2C */
+ at91_add_device_i2c();
++ /* LCD Controller */
++ at91_add_device_lcdc(&ek_lcdc_data);
+ /* AC97 */
+ at91_add_device_ac97(&ek_ac97_data);
+ }
+Index: linux-2.6.22.1/arch/arm/mach-at91/generic.h
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/generic.h (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/generic.h (arbetskopia)
+@@ -36,6 +36,7 @@
+ /* Power Management */
+ extern void at91_irq_suspend(void);
+ extern void at91_irq_resume(void);
++extern int at91_suspend_entering_slow_clock(void);
+
+ /* GPIO */
+ #define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
+Index: linux-2.6.22.1/arch/arm/mach-at91/board-ek.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/board-ek.c (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/board-ek.c (arbetskopia)
+@@ -73,6 +73,187 @@
+ at91rm9200_init_interrupts(NULL);
+ }
+
++#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
++#include <video/s1d13xxxfb.h>
++#include <asm/arch/ics1523.h>
++
++/* EPSON S1D13806 FB */
++#define AT91_FB_REG_BASE 0x40000000L
++#define AT91_FB_REG_SIZE 0x200
++#define AT91_FB_VMEM_BASE 0x40200000L
++#define AT91_FB_VMEM_SIZE 0x140000L
++
++static void __init ek_init_video(void)
++{
++ /* NWAIT Signal */
++ at91_set_A_periph(AT91_PIN_PC6, 0);
++
++ /* Initialization of the Static Memory Controller for Chip Select 3 */
++ at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_DBW_16 /* 16 bit */
++ | AT91_SMC_WSEN | AT91_SMC_NWS_(5) /* wait states */
++ | AT91_SMC_TDF_(1) /* float time */
++ );
++
++ at91_ics1523_init();
++}
++
++/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz)
++ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
++static const struct s1d13xxxfb_regval ek_s1dfb_initregs[] = {
++ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */
++ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */
++ {S1DREG_GPIO_CNF0, 0xFF}, // 0x00
++ {S1DREG_GPIO_CNF1, 0x1F}, // 0x08
++ {S1DREG_GPIO_CTL0, 0x00},
++ {S1DREG_GPIO_CTL1, 0x00},
++ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/
++ {S1DREG_LCD_CLK_CNF, 0x00},
++ {S1DREG_CRT_CLK_CNF, 0x00},
++ {S1DREG_MPLUG_CLK_CNF, 0x00},
++ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */
++ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */
++ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */
++ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */
++ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */
++ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */
++ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */
++ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */
++ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */
++ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */
++ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */
++ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF},
++ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */
++ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */
++ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */
++ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */
++ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */
++ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */
++ {S1DREG_LCD_DISP_START0, 0x00},
++ {S1DREG_LCD_DISP_START1, 0xC8},
++ {S1DREG_LCD_DISP_START2, 0x00},
++ {S1DREG_LCD_MEM_OFF0, 0x80},
++ {S1DREG_LCD_MEM_OFF1, 0x02},
++ {S1DREG_LCD_PIX_PAN, 0x00},
++ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B},
++ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C},
++ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */
++ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */
++ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */
++ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */
++ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF},
++ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */
++ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */
++ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */
++ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */
++ {S1DREG_TV_OUT_CTL, 0x10},
++ {0x005E, 0x9F},
++ {0x005F, 0x00},
++ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */
++ {S1DREG_CRT_DISP_START0, 0x00},
++ {S1DREG_CRT_DISP_START1, 0x00},
++ {S1DREG_CRT_DISP_START2, 0x00},
++ {S1DREG_CRT_MEM_OFF0, 0x80},
++ {S1DREG_CRT_MEM_OFF1, 0x02},
++ {S1DREG_CRT_PIX_PAN, 0x00},
++ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B},
++ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C},
++ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */
++ {S1DREG_LCD_CUR_START, 0x01},
++ {S1DREG_LCD_CUR_XPOS0, 0x00},
++ {S1DREG_LCD_CUR_XPOS1, 0x00},
++ {S1DREG_LCD_CUR_YPOS0, 0x00},
++ {S1DREG_LCD_CUR_YPOS1, 0x00},
++ {S1DREG_LCD_CUR_BCTL0, 0x00},
++ {S1DREG_LCD_CUR_GCTL0, 0x00},
++ {S1DREG_LCD_CUR_RCTL0, 0x00},
++ {S1DREG_LCD_CUR_BCTL1, 0x1F},
++ {S1DREG_LCD_CUR_GCTL1, 0x3F},
++ {S1DREG_LCD_CUR_RCTL1, 0x1F},
++ {S1DREG_LCD_CUR_FIFO_HTC, 0x00},
++ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */
++ {S1DREG_CRT_CUR_START, 0x01},
++ {S1DREG_CRT_CUR_XPOS0, 0x00},
++ {S1DREG_CRT_CUR_XPOS1, 0x00},
++ {S1DREG_CRT_CUR_YPOS0, 0x00},
++ {S1DREG_CRT_CUR_YPOS1, 0x00},
++ {S1DREG_CRT_CUR_BCTL0, 0x00},
++ {S1DREG_CRT_CUR_GCTL0, 0x00},
++ {S1DREG_CRT_CUR_RCTL0, 0x00},
++ {S1DREG_CRT_CUR_BCTL1, 0x1F},
++ {S1DREG_CRT_CUR_GCTL1, 0x3F},
++ {S1DREG_CRT_CUR_RCTL1, 0x1F},
++ {S1DREG_CRT_CUR_FIFO_HTC, 0x00},
++ {S1DREG_BBLT_CTL0, 0x00},
++ {S1DREG_BBLT_CTL0, 0x00},
++ {S1DREG_BBLT_CC_EXP, 0x00},
++ {S1DREG_BBLT_OP, 0x00},
++ {S1DREG_BBLT_SRC_START0, 0x00},
++ {S1DREG_BBLT_SRC_START1, 0x00},
++ {S1DREG_BBLT_SRC_START2, 0x00},
++ {S1DREG_BBLT_DST_START0, 0x00},
++ {S1DREG_BBLT_DST_START1, 0x00},
++ {S1DREG_BBLT_DST_START2, 0x00},
++ {S1DREG_BBLT_MEM_OFF0, 0x00},
++ {S1DREG_BBLT_MEM_OFF1, 0x00},
++ {S1DREG_BBLT_WIDTH0, 0x00},
++ {S1DREG_BBLT_WIDTH1, 0x00},
++ {S1DREG_BBLT_HEIGHT0, 0x00},
++ {S1DREG_BBLT_HEIGHT1, 0x00},
++ {S1DREG_BBLT_BGC0, 0x00},
++ {S1DREG_BBLT_BGC1, 0x00},
++ {S1DREG_BBLT_FGC0, 0x00},
++ {S1DREG_BBLT_FGC1, 0x00},
++ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */
++ {S1DREG_LKUP_ADDR, 0x00},
++ {S1DREG_PS_CNF, 0x10}, /* Power Save disable */
++ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */
++ {S1DREG_CPU2MEM_WDOGT, 0x00},
++ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */
+};
+
-+static struct gpio_led_platform_data stk_j2_led_data = {
-+ .num_leds = ARRAY_SIZE(stk_j2_led),
-+ .leds = stk_j2_led,
++static struct s1d13xxxfb_pdata ek_s1dfb_pdata = {
++ .initregs = ek_s1dfb_initregs,
++ .initregssize = ARRAY_SIZE(ek_s1dfb_initregs),
++ .platform_init_video = ek_init_video,
+};
+
-+static struct platform_device stk_j2_led_dev = {
-+ .name = "leds-gpio",
-+ .id = 2, /* gpio block J2 */
++static u64 s1dfb_dmamask = 0xffffffffUL;
++
++static struct resource ek_s1dfb_resource[] = {
++ [0] = { /* video mem */
++ .name = "s1d13806 memory",
++ .start = AT91_FB_VMEM_BASE,
++ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = { /* video registers */
++ .name = "s1d13806 registers",
++ .start = AT91_FB_REG_BASE,
++ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
++ .flags = IORESOURCE_MEM,
++ },
++};
++
++static struct platform_device ek_s1dfb_device = {
++ .name = "s1d13806fb",
++ .id = -1,
+ .dev = {
-+ .platform_data = &stk_j2_led_data,
++ .dma_mask = &s1dfb_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ .platform_data = &ek_s1dfb_pdata,
+ },
++ .resource = ek_s1dfb_resource,
++ .num_resources = ARRAY_SIZE(ek_s1dfb_resource),
+};
+
-+static void setup_j2_leds(void)
++static void __init ek_add_device_video(void)
++{
++ platform_device_register(&ek_s1dfb_device);
++}
++#else
++static void __init ek_add_device_video(void) {}
++#endif
++
+ static struct at91_eth_data __initdata ek_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+@@ -113,7 +294,7 @@
+ #define EK_FLASH_SIZE 0x200000
+
+ static struct physmap_flash_data ek_flash_data = {
+- .width = 2,
++ .width = 2,
+ };
+
+ static struct resource ek_flash_resource = {
+@@ -132,6 +313,18 @@
+ .num_resources = 1,
+ };
+
++static struct at91_gpio_led ek_leds[] = {
++ {
++ .name = "led0",
++ .gpio = AT91_PIN_PB1,
++ .trigger = "heartbeat",
++ },
++ {
++ .name = "led1",
++ .gpio = AT91_PIN_PB2,
++ .trigger = "timer",
++ }
++};
+
+ static void __init ek_board_init(void)
{
--#ifdef SW2_DEFAULT
-- at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
-+ unsigned i;
+@@ -158,8 +351,10 @@
+ #endif
+ /* NOR Flash */
+ platform_device_register(&ek_flash);
++ /* LEDs */
++ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* VGA */
+-// ek_add_device_video();
++ ek_add_device_video();
+ }
+
+ MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91rm9200.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91rm9200.c (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91rm9200.c (arbetskopia)
+@@ -267,6 +267,33 @@
+
+
+ /* --------------------------------------------------------------------
++ * Timer/Counter library initialization
++ * -------------------------------------------------------------------- */
++#ifdef CONFIG_ATMEL_TCLIB
+
-+ for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++)
-+ at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
++#include "tclib.h"
+
-+ printk("STK1002: " LEDSTRING "\n");
-+ platform_device_register(&stk_j2_led_dev);
-+}
++static struct atmel_tcblock at91rm9200_tcblocks[] = {
++ [0] = {
++ .physaddr = AT91RM9200_BASE_TCB0,
++ .irq = { AT91RM9200_ID_TC0, AT91RM9200_ID_TC1, AT91RM9200_ID_TC2 },
++ .clk = { &tc0_clk, &tc1_clk, &tc2_clk },
++ },
++ [1] = {
++ .physaddr = AT91RM9200_BASE_TCB1,
++ .irq = { AT91RM9200_ID_TC3, AT91RM9200_ID_TC4, AT91RM9200_ID_TC5 },
++ .clk = { &tc3_clk, &tc4_clk, &tc5_clk },
++ },
++};
+
- #else
-+static void setup_j2_leds(void)
++#define at91rm9200_tc_init() atmel_tc_init(at91rm9200_tcblocks, ARRAY_SIZE(at91rm9200_tcblocks))
++
++#else
++#define at91rm9200_tc_init() do {} while(0)
++#endif
++
++
++/* --------------------------------------------------------------------
+ * AT91RM9200 processor initialization
+ * -------------------------------------------------------------------- */
+ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
+@@ -288,6 +315,9 @@
+
+ /* Initialize GPIO subsystem */
+ at91_gpio_init(at91rm9200_gpio, banks);
++
++ /* Initialize the Timer/Counter blocks */
++ at91rm9200_tc_init();
+ }
+
+
+@@ -301,28 +331,28 @@
+ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller (FIQ) */
+ 7, /* System Peripherals */
+- 0, /* Parallel IO Controller A */
+- 0, /* Parallel IO Controller B */
+- 0, /* Parallel IO Controller C */
+- 0, /* Parallel IO Controller D */
+- 6, /* USART 0 */
+- 6, /* USART 1 */
+- 6, /* USART 2 */
+- 6, /* USART 3 */
++ 1, /* Parallel IO Controller A */
++ 1, /* Parallel IO Controller B */
++ 1, /* Parallel IO Controller C */
++ 1, /* Parallel IO Controller D */
++ 5, /* USART 0 */
++ 5, /* USART 1 */
++ 5, /* USART 2 */
++ 5, /* USART 3 */
+ 0, /* Multimedia Card Interface */
+- 4, /* USB Device Port */
+- 0, /* Two-Wire Interface */
+- 6, /* Serial Peripheral Interface */
+- 5, /* Serial Synchronous Controller 0 */
+- 5, /* Serial Synchronous Controller 1 */
+- 5, /* Serial Synchronous Controller 2 */
++ 2, /* USB Device Port */
++ 6, /* Two-Wire Interface */
++ 5, /* Serial Peripheral Interface */
++ 4, /* Serial Synchronous Controller 0 */
++ 4, /* Serial Synchronous Controller 1 */
++ 4, /* Serial Synchronous Controller 2 */
+ 0, /* Timer Counter 0 */
+ 0, /* Timer Counter 1 */
+ 0, /* Timer Counter 2 */
+ 0, /* Timer Counter 3 */
+ 0, /* Timer Counter 4 */
+ 0, /* Timer Counter 5 */
+- 3, /* USB Host port */
++ 2, /* USB Host port */
+ 3, /* Ethernet MAC */
+ 0, /* Advanced Interrupt Controller (IRQ0) */
+ 0, /* Advanced Interrupt Controller (IRQ1) */
+Index: linux-2.6.22.1/arch/arm/mach-at91/ics1523.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/ics1523.c (revision 0)
++++ linux-2.6.22.1/arch/arm/mach-at91/ics1523.c (revision 0)
+@@ -0,0 +1,207 @@
++/*
++ * arch/arm/mach-at91rm9200/ics1523.c
++ *
++ * Copyright (C) 2003 ATMEL Rousset
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <asm/hardware.h>
++#include <asm/io.h>
++
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/init.h>
++
++#include <asm/arch/ics1523.h>
++#include <asm/arch/at91_twi.h>
++#include <asm/arch/gpio.h>
++
++/* TWI Errors */
++#define AT91_TWI_ERROR (AT91_TWI_NACK | AT91_TWI_UNRE | AT91_TWI_OVRE)
++
++
++static void __iomem *twi_base;
++
++#define at91_twi_read(reg) __raw_readl(twi_base + (reg))
++#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg))
++
++
++/* -----------------------------------------------------------------------------
++ * Initialization of TWI CLOCK
++ * ----------------------------------------------------------------------------- */
++
++static void at91_ics1523_SetTwiClock(unsigned int mck_khz)
+{
++ int sclock;
++
++ /* Here, CKDIV = 1 and CHDIV = CLDIV ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */
++ sclock = (10*mck_khz / ICS_TRANSFER_RATE);
++ if (sclock % 10 >= 5)
++ sclock = (sclock /10) - 5;
++ else
++ sclock = (sclock /10)- 6;
++ sclock = (sclock + (4 - sclock %4)) >> 2; /* div 4 */
++
++ at91_twi_write(AT91_TWI_CWGR, 0x00010000 | sclock | (sclock << 8));
+}
-+#endif
+
-+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-+static void __init at73c213_set_clk(struct at73c213_board_info *info)
++/* -----------------------------------------------------------------------------
++ * Read a byte with TWI Interface from the Clock Generator ICS1523
++ * ----------------------------------------------------------------------------- */
++
++static int at91_ics1523_ReadByte(unsigned char reg_address, unsigned char *data_in)
+{
-+ struct clk *gclk;
-+ struct clk *pll;
++ int Status, nb_trial;
+
-+ gclk = clk_get(NULL, "gclk0");
-+ if (IS_ERR(gclk))
-+ goto err_gclk;
-+ pll = clk_get(NULL, "pll0");
-+ if (IS_ERR(pll))
-+ goto err_pll;
++ at91_twi_write(AT91_TWI_MMR, AT91_TWI_MREAD | AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
++ at91_twi_write(AT91_TWI_IADR, reg_address);
++ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
+
-+ if (clk_set_parent(gclk, pll)) {
-+ pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
-+ goto err_set_clk;
++ /* Program temporizing period (300us) */
++ udelay(300);
++
++ /* Wait TXcomplete ... */
++ nb_trial = 0;
++ Status = at91_twi_read(AT91_TWI_SR);
++ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
++ nb_trial++;
++ Status = at91_twi_read(AT91_TWI_SR);
+ }
+
-+ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
-+ info->dac_clk = gclk;
++ if (Status & AT91_TWI_TXCOMP) {
++ *data_in = (unsigned char) at91_twi_read(AT91_TWI_RHR);
++ return ICS1523_ACCESS_OK;
++ }
++ else
++ return ICS1523_ACCESS_ERROR;
++}
+
-+err_set_clk:
-+ clk_put(pll);
-+err_pll:
-+ clk_put(gclk);
-+err_gclk:
-+ return;
++/* -----------------------------------------------------------------------------
++ * Write a byte with TWI Interface to the Clock Generator ICS1523
++ * ----------------------------------------------------------------------------- */
++
++static int at91_ics1523_WriteByte(unsigned char reg_address, unsigned char data_out)
++{
++ int Status, nb_trial;
++
++ at91_twi_write(AT91_TWI_MMR, AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
++ at91_twi_write(AT91_TWI_IADR, reg_address);
++ at91_twi_write(AT91_TWI_THR, data_out);
++ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
++
++ /* Program temporizing period (300us) */
++ udelay(300);
++
++ nb_trial = 0;
++ Status = at91_twi_read(AT91_TWI_SR);
++ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
++ nb_trial++;
++ if (Status & AT91_TWI_ERROR) {
++ /* If Underrun OR NACK - Start again */
++ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
++
++ /* Program temporizing period (300us) */
++ udelay(300);
++ }
++ Status = at91_twi_read(AT91_TWI_SR);
++ };
++
++ if (Status & AT91_TWI_TXCOMP)
++ return ICS1523_ACCESS_OK;
++ else
++ return ICS1523_ACCESS_ERROR;
+}
++
++/* -----------------------------------------------------------------------------
++ * Initialization of the Clock Generator ICS1523
++ * ----------------------------------------------------------------------------- */
++
++int at91_ics1523_init(void)
++{
++ int nb_trial;
++ int ack = ICS1523_ACCESS_OK;
++ unsigned int status = 0xffffffff;
++ struct clk *twi_clk;
++
++ /* Map in TWI peripheral */
++ twi_base = ioremap(AT91RM9200_BASE_TWI, SZ_16K);
++ if (!twi_base)
++ return -ENOMEM;
++
++ /* pins used for TWI interface */
++ at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */
++ at91_set_multi_drive(AT91_PIN_PA25, 1);
++ at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */
++ at91_set_multi_drive(AT91_PIN_PA26, 1);
++
++ /* Enable the TWI clock */
++ twi_clk = clk_get(NULL, "twi_clk");
++ if (IS_ERR(twi_clk))
++ return ICS1523_ACCESS_ERROR;
++ clk_enable(twi_clk);
++
++ /* Disable interrupts */
++ at91_twi_write(AT91_TWI_IDR, -1);
++
++ /* Reset peripheral */
++ at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST);
++
++ /* Set Master mode */
++ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);
++
++ /* Set TWI Clock Waveform Generator Register */
++ at91_ics1523_SetTwiClock(60000); /* MCK in KHz = 60000 KHz */
++
++ /* ICS1523 Initialisation */
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) 0);
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OE, (unsigned char) (ICS_OEF | ICS_OET2 | ICS_OETCK));
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OD, (unsigned char) (ICS_INSEL | 0x7F));
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0);
++
++ nb_trial = 0;
++ do {
++ nb_trial++;
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) (ICS_ENDLS | ICS_ENPLS | ICS_PDEN /*| ICS_FUNCSEL*/));
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_LCR, (unsigned char) (ICS_PSD | ICS_PFD));
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD0, (unsigned char) 0x39) ; /* 0x7A */
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD1, (unsigned char) 0x00);
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_PLLR));
++
++ /* Program 1ms temporizing period */
++ mdelay(1);
++
++ at91_ics1523_ReadByte ((unsigned char) ICS_SR, (char *)&status);
++ } while (!((unsigned int) status & (unsigned int) ICS_PLLLOCK) && (nb_trial < 10));
++
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAC, (unsigned char) 0x03) ; /* 0x01 */
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_DPAR));
++
++ /* Program 1ms temporizing period */
++ mdelay(1);
++
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0x00);
++
++ /* Program 1ms temporizing period */
++ mdelay(1);
++
++ /* All done - cleanup */
++ iounmap(twi_base);
++ clk_disable(twi_clk);
++ clk_put(twi_clk);
++
++ return ack;
++}
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91rm9200_devices.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91rm9200_devices.c (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91rm9200_devices.c (arbetskopia)
+@@ -477,7 +477,18 @@
+ * SPI
+ * -------------------------------------------------------------------- */
+
+-#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
++#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) /* legacy SPI driver */
++#define SPI_DEVNAME "at91_spi"
++
++#elif defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) /* SPI bitbanging driver */
++#define SPI_DEVNAME "at91_spi"
++
++#elif defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) /* new SPI driver */
++#define SPI_DEVNAME "atmel_spi"
++
+#endif
++
++#ifdef SPI_DEVNAME
+ static u64 spi_dmamask = 0xffffffffUL;
+
+ static struct resource spi_resources[] = {
+@@ -494,7 +505,7 @@
+ };
+
+ static struct platform_device at91rm9200_spi_device = {
+- .name = "at91_spi",
++ .name = SPI_DEVNAME,
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+@@ -603,6 +614,32 @@
+ #endif
+
+
++#if defined(CONFIG_NEW_LEDS)
++
++static struct platform_device at91_leds = {
++ .name = "at91_leds",
++ .id = -1,
++};
++
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
++{
++ if (!nr)
++ return;
++
++ at91_leds.dev.platform_data = leds;
++
++ for ( ; nr; nr--, leds++) {
++ leds->index = nr; /* first record stores number of leds */
++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
++ }
++
++ platform_device_register(&at91_leds);
++}
++#else
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
+#endif
+
-+void __init setup_board(void)
++
+ /* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+Index: linux-2.6.22.1/arch/arm/mach-at91/Makefile
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/Makefile (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/Makefile (arbetskopia)
+@@ -8,6 +8,8 @@
+ obj- :=
+
+ obj-$(CONFIG_PM) += pm.o
++obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o
++obj-$(CONFIG_ATMEL_TCLIB) += tclib.o
+
+ # CPU-specific support
+ obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
+@@ -26,10 +28,12 @@
+ obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
+ obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
+ obj-$(CONFIG_MACH_KAFA) += board-kafa.o
++obj-$(CONFIG_MACH_CHUB) += board-chub.o
+ obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
+
+ # AT91SAM9260 board-specific support
+ obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
++obj-$(CONFIG_MACH_CAM60) += board-cam60.o
+
+ # AT91SAM9261 board-specific support
+ obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
+@@ -51,7 +55,7 @@
+ obj-$(CONFIG_LEDS) += $(led-y)
+
+ # VGA support
+-#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
++obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
+
+
+ ifeq ($(CONFIG_PM_DEBUG),y)
+Index: linux-2.6.22.1/arch/arm/mach-at91/tclib.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/tclib.c (revision 0)
++++ linux-2.6.22.1/arch/arm/mach-at91/tclib.c (revision 0)
+@@ -0,0 +1,17 @@
++#include <linux/clk.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++
++#include "tclib.h"
++
++static struct atmel_tcblock *blocks;
++static int nblocks;
++
++/*
++ * Called from the processor-specific init to register the TC Blocks.
++ */
++void __init atmel_tc_init(struct atmel_tcblock *tcblocks, int n)
+{
-+#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
- at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
++ blocks = tcblocks;
++ nblocks = n;
++}
+Index: linux-2.6.22.1/arch/arm/mach-at91/tclib.h
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/tclib.h (revision 0)
++++ linux-2.6.22.1/arch/arm/mach-at91/tclib.h (revision 0)
+@@ -0,0 +1,11 @@
++
++#define TC_PER_TCB 3
++
++struct atmel_tcblock {
++ u32 physaddr;
++ void __iomem *ioaddr;
++ struct clk *clk[TC_PER_TCB];
++ int irq[TC_PER_TCB];
++};
++
++extern void __init atmel_tc_init(struct atmel_tcblock *tcblocks, int n);
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91sam9rl.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91sam9rl.c (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9rl.c (arbetskopia)
+@@ -246,6 +246,28 @@
+
+
+ /* --------------------------------------------------------------------
++ * Timer/Counter library initialization
++ * -------------------------------------------------------------------- */
++#ifdef CONFIG_ATMEL_TCLIB
++
++#include "tclib.h"
++
++static struct atmel_tcblock at91sam9rl_tcblocks[] = {
++ [0] = {
++ .physaddr = AT91SAM9RL_BASE_TCB0,
++ .irq = { AT91SAM9RL_ID_TC0, AT91SAM9RL_ID_TC1, AT91SAM9RL_ID_TC2 },
++ .clk = { &tc0_clk, &tc1_clk, &tc2_clk },
++ }
++};
++
++#define at91sam9rl_tc_init() atmel_tc_init(at91sam9rl_tcblocks, ARRAY_SIZE(at91sam9rl_tcblocks))
++
+#else
-+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
++#define at91sam9rl_tc_init() do {} while(0)
++#endif
++
++
++/* --------------------------------------------------------------------
+ * AT91SAM9RL processor initialization
+ * -------------------------------------------------------------------- */
+
+@@ -284,6 +306,9 @@
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91sam9rl_gpio, 4);
++
++ /* Initialize the Timer/Counter blocks */
++ at91sam9rl_tc_init();
+ }
+
+ /* --------------------------------------------------------------------
+Index: linux-2.6.22.1/arch/arm/mach-at91/at91sam9rl_devices.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/at91sam9rl_devices.c (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9rl_devices.c (arbetskopia)
+@@ -370,6 +370,32 @@
#endif
- /* USART 2/unused: expansion connector */
- at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
-@@ -140,18 +276,46 @@ static int __init atstk1002_init(void)
- at32_add_system_devices();
--#ifdef SW2_DEFAULT
-- at32_add_device_usart(0);
--#else
-+#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
- at32_add_device_usart(1);
++#if defined(CONFIG_NEW_LEDS)
++
++static struct platform_device at91_leds = {
++ .name = "at91_leds",
++ .id = -1,
++};
++
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
++{
++ if (!nr)
++ return;
++
++ at91_leds.dev.platform_data = leds;
++
++ for ( ; nr; nr--, leds++) {
++ leds->index = nr; /* first record stores number of leds */
++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
++ }
++
++ platform_device_register(&at91_leds);
++}
+#else
-+ at32_add_device_usart(0);
- #endif
- at32_add_device_usart(2);
++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
++#endif
++
++
+ /* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+Index: linux-2.6.22.1/arch/arm/mach-at91/pm.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/pm.c (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/pm.c (arbetskopia)
+@@ -63,6 +63,7 @@
+ * Verify that all the clocks are correct before entering
+ * slow-clock mode.
+ */
++#warning "SAM9260 only has 3 programmable clocks."
+ static int at91_pm_verify_clocks(void)
+ {
+ unsigned long scsr;
+@@ -103,20 +104,15 @@
+ }
-+#ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
- set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
--
-- at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+ /*
+- * Call this from platform driver suspend() to see how deeply to suspend.
++ * This is called from clk_must_disable(), to see how deeply to suspend.
+ * For example, some controllers (like OHCI) need one of the PLL clocks
+ * in order to act as a wakeup source, and those are not available when
+ * going into slow clock mode.
+- *
+- * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have
+- * the very same problem (but not using at91 main_clk), and it'd be better
+- * to add one generic API rather than lots of platform-specific ones.
+ */
+ int at91_suspend_entering_slow_clock(void)
+ {
+ return (target_state == PM_SUSPEND_MEM);
+ }
+-EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
+
+
+ static void (*slow_clock)(void);
+@@ -205,16 +201,23 @@
+ .enter = at91_pm_enter,
+ };
+
++#ifdef CONFIG_AT91_SLOW_CLOCK
++extern void at91rm9200_slow_clock(void);
++extern u32 at91rm9200_slow_clock_sz;
+#endif
-+#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
-+ set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
++
+ static int __init at91_pm_init(void)
+ {
+- printk("AT91: Power Management\n");
+-
+-#ifdef CONFIG_AT91_PM_SLOW_CLOCK
+- /* REVISIT allocations of SRAM should be dynamically managed.
++#ifdef CONFIG_AT91_SLOW_CLOCK
++ /*
++ * REVISIT allocations of SRAM should be dynamically managed.
+ * FIQ handlers and other components will want SRAM/TCM too...
+ */
+- slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
++ slow_clock = (void *) (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE + (3 * SZ_4K));
+ memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
++ printk("AT91: Power Management (with slow clock mode)\n");
+#else
- at32_add_device_lcdc(0, &atstk1000_lcdc_data,
- fbmem_start, fbmem_size);
-+#endif
++ printk("AT91: Power Management\n");
+ #endif
+
+ /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */
+Index: linux-2.6.22.1/arch/arm/mach-at91/pm_slowclock.S
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/pm_slowclock.S (revision 0)
++++ linux-2.6.22.1/arch/arm/mach-at91/pm_slowclock.S (revision 0)
+@@ -0,0 +1,172 @@
++/*
++ * arch/arm/mach-at91/pm_slow_clock.S
++ *
++ * Copyright (C) 2006 Savin Zlobec
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
+
-+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++#include <linux/linkage.h>
++#include <asm/hardware.h>
++#include <asm/arch/at91_pmc.h>
++#include <asm/arch/at91rm9200_mc.h>
++
++#define MCKRDY_TIMEOUT 1000
++#define MOSCRDY_TIMEOUT 1000
++#define PLLALOCK_TIMEOUT 1000
++
++ .macro wait_mckrdy
++ mov r2, #MCKRDY_TIMEOUT
++1: sub r2, r2, #1
++ cmp r2, #0
++ beq 2f
++ ldr r3, [r1, #AT91_PMC_SR]
++ tst r3, #AT91_PMC_MCKRDY
++ beq 1b
++2:
++ .endm
++
++ .macro wait_moscrdy
++ mov r2, #MOSCRDY_TIMEOUT
++1: sub r2, r2, #1
++ cmp r2, #0
++ beq 2f
++ ldr r3, [r1, #AT91_PMC_SR]
++ tst r3, #AT91_PMC_MOSCS
++ beq 1b
++2:
++ .endm
++
++ .macro wait_pllalock
++ mov r2, #PLLALOCK_TIMEOUT
++1: sub r2, r2, #1
++ cmp r2, #0
++ beq 2f
++ ldr r3, [r1, #AT91_PMC_SR]
++ tst r3, #AT91_PMC_LOCKA
++ beq 1b
++2:
++ .endm
++
++ .macro wait_plladis
++ mov r2, #PLLALOCK_TIMEOUT
++1: sub r2, r2, #1
++ cmp r2, #0
++ beq 2f
++ ldr r3, [r1, #AT91_PMC_SR]
++ tst r3, #AT91_PMC_LOCKA
++ bne 1b
++2:
++ .endm
++
++ .text
++
++ENTRY(at91rm9200_slow_clock)
++
++ ldr r1, .at91_va_base_sys
++
++ /* Put SDRAM in self refresh mode */
++
++ b 1f
++ .align 5
++1: mcr p15, 0, r0, c7, c10, 4
++ mov r2, #1
++ str r2, [r1, #AT91_SDRAMC_SRR]
++
++ /* Save Master clock setting */
++
++ ldr r2, [r1, #AT91_PMC_MCKR]
++ str r2, .saved_mckr
++
++ /*
++ * Set the Master clock source to slow clock
++ *
++ * First set the CSS field, wait for MCKRDY
++ * and than set the PRES and MDIV fields.
++ *
++ * See eratta #2[78] for details.
++ */
++
++ bic r2, r2, #3
++ str r2, [r1, #AT91_PMC_MCKR]
++
++ wait_mckrdy
++
++ mov r2, #0
++ str r2, [r1, #AT91_PMC_MCKR]
++
++ /* Save PLLA setting and disable it */
++
++ ldr r2, [r1, #AT91_CKGR_PLLAR]
++ str r2, .saved_pllar
++
++ mov r2, #0
++ str r2, [r1, #AT91_CKGR_PLLAR]
++
++ wait_plladis
++
++ /* Turn off the main oscillator */
++
++ ldr r2, [r1, #AT91_CKGR_MOR]
++ bic r2, r2, #AT91_PMC_MOSCEN
++ str r2, [r1, #AT91_CKGR_MOR]
++
++ /* Wait for interrupt */
++
++ mcr p15, 0, r0, c7, c0, 4
++
++ /* Turn on the main oscillator */
++
++ ldr r2, [r1, #AT91_CKGR_MOR]
++ orr r2, r2, #AT91_PMC_MOSCEN
++ str r2, [r1, #AT91_CKGR_MOR]
++
++ wait_moscrdy
++
++ /* Restore PLLA setting */
++
++ ldr r2, .saved_pllar
++ str r2, [r1, #AT91_CKGR_PLLAR]
++
++ wait_pllalock
++
++ /*
++ * Restore master clock setting
++ *
++ * First set PRES if it was not 0,
++ * than set CSS and MDIV fields.
++ * After every change wait for
++ * MCKRDY.
++ *
++ * See eratta #2[78] for details.
++ */
++
++ ldr r2, .saved_mckr
++ tst r2, #0x1C
++ beq 2f
++ and r2, r2, #0x1C
++ str r2, [r1, #AT91_PMC_MCKR]
++
++ wait_mckrdy
++
++2: ldr r2, .saved_mckr
++ str r2, [r1, #AT91_PMC_MCKR]
++
++ wait_mckrdy
++
++ mov pc, lr
++
++.saved_mckr:
++ .word 0
++
++.saved_pllar:
++ .word 0
++
++.at91_va_base_sys:
++ .word AT91_VA_BASE_SYS
++
++ENTRY(at91rm9200_slow_clock_sz)
++ .word .-at91rm9200_slow_clock
+Index: linux-2.6.22.1/arch/arm/mach-at91/board-dk.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/board-dk.c (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/board-dk.c (arbetskopia)
+@@ -73,6 +73,185 @@
+ at91rm9200_init_interrupts(NULL);
+ }
+
++#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
++#include <video/s1d13xxxfb.h>
++#include <asm/arch/ics1523.h>
++
++/* EPSON S1D13806 FB */
++#define AT91_FB_REG_BASE 0x30000000L
++#define AT91_FB_REG_SIZE 0x200
++#define AT91_FB_VMEM_BASE 0x30200000L
++#define AT91_FB_VMEM_SIZE 0x140000L
++
++static void __init dk_init_video(void)
++{
++ /* NWAIT Signal */
++ at91_set_A_periph(AT91_PIN_PC6, 0);
++
++ /* Initialization of the Static Memory Controller for Chip Select 2 */
++ at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
++ | AT91_SMC_WSEN | AT91_SMC_NWS_(4) /* wait states */
++ | AT91_SMC_TDF_(1) /* float time */
++ );
++
++ at91_ics1523_init();
++}
++
++/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz)
++ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
++static const struct s1d13xxxfb_regval dk_s1dfb_initregs[] = {
++ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */
++ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */
++ {S1DREG_GPIO_CNF0, 0x00},
++ {S1DREG_GPIO_CNF1, 0x00},
++ {S1DREG_GPIO_CTL0, 0x08},
++ {S1DREG_GPIO_CTL1, 0x00},
++ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/
++ {S1DREG_LCD_CLK_CNF, 0x00},
++ {S1DREG_CRT_CLK_CNF, 0x00},
++ {S1DREG_MPLUG_CLK_CNF, 0x00},
++ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */
++ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */
++ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */
++ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */
++ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */
++ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */
++ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */
++ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */
++ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */
++ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */
++ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */
++ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF},
++ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */
++ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */
++ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */
++ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */
++ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */
++ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */
++ {S1DREG_LCD_DISP_START0, 0x00},
++ {S1DREG_LCD_DISP_START1, 0xC8},
++ {S1DREG_LCD_DISP_START2, 0x00},
++ {S1DREG_LCD_MEM_OFF0, 0x80},
++ {S1DREG_LCD_MEM_OFF1, 0x02},
++ {S1DREG_LCD_PIX_PAN, 0x00},
++ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B},
++ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C},
++ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */
++ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */
++ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */
++ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */
++ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF},
++ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */
++ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */
++ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */
++ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */
++ {S1DREG_TV_OUT_CTL, 0x10},
++ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */
++ {S1DREG_CRT_DISP_START0, 0x00},
++ {S1DREG_CRT_DISP_START1, 0x00},
++ {S1DREG_CRT_DISP_START2, 0x00},
++ {S1DREG_CRT_MEM_OFF0, 0x80},
++ {S1DREG_CRT_MEM_OFF1, 0x02},
++ {S1DREG_CRT_PIX_PAN, 0x00},
++ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B},
++ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C},
++ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */
++ {S1DREG_LCD_CUR_START, 0x01},
++ {S1DREG_LCD_CUR_XPOS0, 0x00},
++ {S1DREG_LCD_CUR_XPOS1, 0x00},
++ {S1DREG_LCD_CUR_YPOS0, 0x00},
++ {S1DREG_LCD_CUR_YPOS1, 0x00},
++ {S1DREG_LCD_CUR_BCTL0, 0x00},
++ {S1DREG_LCD_CUR_GCTL0, 0x00},
++ {S1DREG_LCD_CUR_RCTL0, 0x00},
++ {S1DREG_LCD_CUR_BCTL1, 0x1F},
++ {S1DREG_LCD_CUR_GCTL1, 0x3F},
++ {S1DREG_LCD_CUR_RCTL1, 0x1F},
++ {S1DREG_LCD_CUR_FIFO_HTC, 0x00},
++ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */
++ {S1DREG_CRT_CUR_START, 0x01},
++ {S1DREG_CRT_CUR_XPOS0, 0x00},
++ {S1DREG_CRT_CUR_XPOS1, 0x00},
++ {S1DREG_CRT_CUR_YPOS0, 0x00},
++ {S1DREG_CRT_CUR_YPOS1, 0x00},
++ {S1DREG_CRT_CUR_BCTL0, 0x00},
++ {S1DREG_CRT_CUR_GCTL0, 0x00},
++ {S1DREG_CRT_CUR_RCTL0, 0x00},
++ {S1DREG_CRT_CUR_BCTL1, 0x1F},
++ {S1DREG_CRT_CUR_GCTL1, 0x3F},
++ {S1DREG_CRT_CUR_RCTL1, 0x1F},
++ {S1DREG_CRT_CUR_FIFO_HTC, 0x00},
++ {S1DREG_BBLT_CTL0, 0x00},
++ {S1DREG_BBLT_CTL0, 0x00},
++ {S1DREG_BBLT_CC_EXP, 0x00},
++ {S1DREG_BBLT_OP, 0x00},
++ {S1DREG_BBLT_SRC_START0, 0x00},
++ {S1DREG_BBLT_SRC_START1, 0x00},
++ {S1DREG_BBLT_SRC_START2, 0x00},
++ {S1DREG_BBLT_DST_START0, 0x00},
++ {S1DREG_BBLT_DST_START1, 0x00},
++ {S1DREG_BBLT_DST_START2, 0x00},
++ {S1DREG_BBLT_MEM_OFF0, 0x00},
++ {S1DREG_BBLT_MEM_OFF1, 0x00},
++ {S1DREG_BBLT_WIDTH0, 0x00},
++ {S1DREG_BBLT_WIDTH1, 0x00},
++ {S1DREG_BBLT_HEIGHT0, 0x00},
++ {S1DREG_BBLT_HEIGHT1, 0x00},
++ {S1DREG_BBLT_BGC0, 0x00},
++ {S1DREG_BBLT_BGC1, 0x00},
++ {S1DREG_BBLT_FGC0, 0x00},
++ {S1DREG_BBLT_FGC1, 0x00},
++ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */
++ {S1DREG_LKUP_ADDR, 0x00},
++ {S1DREG_PS_CNF, 0x00}, /* Power Save disable */
++ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */
++ {S1DREG_CPU2MEM_WDOGT, 0x00},
++ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */
++};
++
++static struct s1d13xxxfb_pdata dk_s1dfb_pdata = {
++ .initregs = dk_s1dfb_initregs,
++ .initregssize = ARRAY_SIZE(dk_s1dfb_initregs),
++ .platform_init_video = dk_init_video,
++};
++
++static u64 s1dfb_dmamask = 0xffffffffUL;
++
++static struct resource dk_s1dfb_resource[] = {
++ [0] = { /* video mem */
++ .name = "s1d13806 memory",
++ .start = AT91_FB_VMEM_BASE,
++ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = { /* video registers */
++ .name = "s1d13806 registers",
++ .start = AT91_FB_REG_BASE,
++ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
++ .flags = IORESOURCE_MEM,
++ },
++};
++
++static struct platform_device dk_s1dfb_device = {
++ .name = "s1d13806fb",
++ .id = -1,
++ .dev = {
++ .dma_mask = &s1dfb_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ .platform_data = &dk_s1dfb_pdata,
++ },
++ .resource = dk_s1dfb_resource,
++ .num_resources = ARRAY_SIZE(dk_s1dfb_resource),
++};
++
++static void __init dk_add_device_video(void)
++{
++ platform_device_register(&dk_s1dfb_device);
++}
++#else
++static void __init dk_add_device_video(void) {}
+#endif
-+#ifdef CONFIG_BOARD_ATSTK1002_SPI1
-+ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
++
+ static struct at91_eth_data __initdata dk_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+@@ -151,7 +330,7 @@
+ #define DK_FLASH_SIZE 0x200000
+
+ static struct physmap_flash_data dk_flash_data = {
+- .width = 2,
++ .width = 2,
+ };
+
+ static struct resource dk_flash_resource = {
+@@ -170,6 +349,13 @@
+ .num_resources = 1,
+ };
+
++static struct at91_gpio_led dk_leds[] = {
++ {
++ .name = "led0",
++ .gpio = AT91_PIN_PB2,
++ .trigger = "timer",
++ }
++};
+
+ static void __init dk_board_init(void)
+ {
+@@ -200,8 +386,10 @@
+ at91_add_device_nand(&dk_nand_data);
+ /* NOR Flash */
+ platform_device_register(&dk_flash);
++ /* LEDs */
++ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
+ /* VGA */
+-// dk_add_device_video();
++ dk_add_device_video();
+ }
+
+ MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
+Index: linux-2.6.22.1/arch/arm/mach-at91/board-csb337.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/board-csb337.c (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/board-csb337.c (arbetskopia)
+@@ -24,6 +24,7 @@
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
+ #include <linux/spi/spi.h>
++#include <linux/interrupt.h>
+ #include <linux/mtd/physmap.h>
+
+ #include <asm/hardware.h>
+@@ -59,6 +60,7 @@
+
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
++ at91_set_gpio_output(AT91_PIN_PB2, 1); /* third (unused) LED */
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&csb337_uart_config);
+@@ -149,6 +151,55 @@
+ .num_resources = ARRAY_SIZE(csb_flash_resources),
+ };
+
++static struct at91_gpio_led csb337_leds[] = {
++ {
++ .name = "led0",
++ .gpio = AT91_PIN_PB0,
++ .trigger = "heartbeat",
++ },
++ {
++ .name = "led1",
++ .gpio = AT91_PIN_PB1,
++ .trigger = "timer",
++ },
++ {
++ .name = "led2",
++ .gpio = AT91_PIN_PB2,
++ }
++};
++
++#if defined(CONFIG_CSB300_WAKE_SW0) || defined(CONFIG_CSB300_WAKE_SW1)
++static irqreturn_t switch_irq_handler(int irq, void *context)
++{
++ return IRQ_HANDLED;
++}
++
++static inline void __init switch_irq_setup(int irq, char *name, unsigned long mode)
++{
++ int res;
++
++ res = request_irq(irq, switch_irq_handler, IRQF_SAMPLE_RANDOM | mode, name, NULL);
++ if (res == 0)
++ enable_irq_wake(irq);
++}
++
++static void __init csb300_switches(void)
++{
++#ifdef CONFIG_CSB300_WAKE_SW0
++ at91_set_A_periph(AT91_PIN_PB29, 1); /* IRQ0 */
++ switch_irq_setup(AT91RM9200_ID_IRQ0, "csb300_sw0", IRQF_TRIGGER_FALLING);
+#endif
-+ at32_add_device_twi(0);
-+#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
-+ at32_add_device_mci(0, &mci0_data);
++#ifdef CONFIG_CSB300_WAKE_SW1
++ at91_set_gpio_input(AT91_PIN_PB28, 1);
++ at91_set_deglitch(AT91_PIN_PB28, 1);
++ switch_irq_setup(AT91_PIN_PB28, "csb300_sw1", IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING);
+#endif
-+ at32_add_device_usba(0, NULL);
-+ at32_add_device_abdac(0);
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-+ at32_add_device_ssc(0, ATMEL_SSC_TX);
++ /* there's also SW2 at PA21, GPIO or TIOA2 */
++}
++#else
++static void __init csb300_switches(void) {}
+#endif
+
-+ setup_j2_leds();
+ static void __init csb337_board_init(void)
+ {
+ /* Serial */
+@@ -168,8 +219,12 @@
+ at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
+ /* MMC */
+ at91_add_device_mmc(0, &csb337_mmc_data);
++ /* LEDS */
++ at91_gpio_leds(csb337_leds, ARRAY_SIZE(csb337_leds));
+ /* NOR flash */
+ platform_device_register(&csb_flash);
++ /* Switches on CSB300 */
++ csb300_switches();
+ }
+
+ MACHINE_START(CSB337, "Cogent CSB337")
+Index: linux-2.6.22.1/arch/arm/mach-at91/clock.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/clock.c (revision 1)
++++ linux-2.6.22.1/arch/arm/mach-at91/clock.c (arbetskopia)
+@@ -32,6 +32,7 @@
+ #include <asm/arch/cpu.h>
+
+ #include "clock.h"
++#include "generic.h"
+
+
+ /*
+@@ -254,6 +255,23 @@
+
+ /*------------------------------------------------------------------------*/
+
++#ifdef CONFIG_PM
++
++int clk_must_disable(struct clk *clk)
++{
++ if (!at91_suspend_entering_slow_clock())
++ return 0;
++
++ while (clk->parent)
++ clk = clk->parent;
++ return clk != &clk32k;
++}
++EXPORT_SYMBOL(clk_must_disable);
+
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-+ at73c213_set_clk(&at73c213_data);
-+#endif
+#endif
++
++/*------------------------------------------------------------------------*/
++
+ #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
- return 0;
- }
-diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
-index 49493ad..adce168 100644
---- a/arch/avr32/configs/atngw100_defconfig
-+++ b/arch/avr32/configs/atngw100_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.22-rc5
--# Sat Jun 23 15:40:05 2007
-+# Linux kernel version: 2.6.22.atmel.1
-+# Thu Jul 12 17:49:20 2007
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -114,6 +114,7 @@ CONFIG_PLATFORM_AT32AP=y
- CONFIG_CPU_AT32AP7000=y
- # CONFIG_BOARD_ATSTK1000 is not set
- CONFIG_BOARD_ATNGW100=y
-+# CONFIG_BOARD_ATNGW100_I2C_GPIO is not set
- CONFIG_LOADER_U_BOOT=y
-
- #
-@@ -122,6 +123,7 @@ CONFIG_LOADER_U_BOOT=y
- # CONFIG_AP7000_32_BIT_SMC is not set
- CONFIG_AP7000_16_BIT_SMC=y
- # CONFIG_AP7000_8_BIT_SMC is not set
-+CONFIG_GPIO_DEV=y
- CONFIG_LOAD_ADDRESS=0x10000000
- CONFIG_ENTRY_ADDRESS=0x90000000
- CONFIG_PHYS_OFFSET=0x10000000
-@@ -145,6 +147,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
- # CONFIG_RESOURCES_64BIT is not set
- CONFIG_ZONE_DMA_FLAG=0
- # CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_DW_DMAC=y
- # CONFIG_HZ_100 is not set
- CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
-@@ -153,6 +156,27 @@ CONFIG_HZ=250
- CONFIG_CMDLINE=""
+ /*
+@@ -362,7 +380,7 @@
- #
-+# Power managment options
-+#
+ static int at91_clk_show(struct seq_file *s, void *unused)
+ {
+- u32 scsr, pcsr, sr;
++ u32 scsr, pcsr, sr, i;
+ struct clk *clk;
+
+ seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
+@@ -372,6 +390,9 @@
+ seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
+ seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
+ seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
++#warning "Hard-coded PCK"
++ for (i = 0; i < 4; i++)
++ seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i)));
+ seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
+
+ seq_printf(s, "\n");
+Index: linux-2.6.22.1/arch/arm/mach-at91/board-cam60.c
+===================================================================
+--- linux-2.6.22.1/arch/arm/mach-at91/board-cam60.c (revision 0)
++++ linux-2.6.22.1/arch/arm/mach-at91/board-cam60.c (revision 0)
+@@ -0,0 +1,148 @@
++/*
++ * KwikByte CAM60
++ *
++ * based on board-sam9260ek.c
++ * Copyright (C) 2005 SAN People
++ * Copyright (C) 2006 Atmel
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++
++#include <asm/hardware.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/at91sam926x_mc.h>
++
++#include "generic.h"
++
+
++/*
++ * Serial port configuration.
++ * 0 .. 5 = USART0 .. USART5
++ * 6 = DBGU
++ */
++static struct at91_uart_config __initdata cam60_uart_config = {
++ .console_tty = 0, /* ttyS0 */
++ .nr_tty = 1,
++ .tty_map = { 6, -1, -1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
++};
++
++static void __init cam60_map_io(void)
++{
++ /* Initialize processor: 10 MHz crystal */
++ at91sam9260_initialize(10000000);
++
++ /* Setup the serial ports and console */
++ at91_init_serial(&cam60_uart_config);
++}
++
++static void __init cam60_init_irq(void)
++{
++ at91sam9260_init_interrupts(NULL);
++}
++
++
++/*
++ * SPI devices.
++ */
++#if defined(CONFIG_MTD_DATAFLASH)
++static struct mtd_partition __initdata cam60_spi_partitions[] = {
++ {
++ .name = "BOOT1",
++ .offset = 0,
++ .size = 4 * 1056,
++ },
++ {
++ .name = "BOOT2",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 256 * 1056,
++ },
++ {
++ .name = "kernel",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 2222 * 1056,
++ },
++ {
++ .name = "file system",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL,
++ },
++};
++
++static struct flash_platform_data __initdata cam60_spi_flash_platform_data = {
++ .name = "spi_flash",
++ .parts = cam60_spi_partitions,
++ .nr_parts = ARRAY_SIZE(cam60_spi_partitions)
++};
++#endif
++
++static struct spi_board_info cam60_spi_devices[] = {
++#if defined(CONFIG_MTD_DATAFLASH)
++ { /* DataFlash chip */
++ .modalias = "mtd_dataflash",
++ .chip_select = 0,
++ .max_speed_hz = 15 * 1000 * 1000,
++ .bus_num = 0,
++ .platform_data = &cam60_spi_flash_platform_data
++ },
++#endif
++};
++
++
++/*
++ * MACB Ethernet device
++ */
++static struct __initdata at91_eth_data cam60_macb_data = {
++ .phy_irq_pin = AT91_PIN_PB5,
++ .is_rmii = 0,
++};
++
++
++static void __init cam60_board_init(void)
++{
++ /* Serial */
++ at91_add_device_serial();
++ /* SPI */
++ at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
++ /* Ethernet */
++ at91_add_device_eth(&cam60_macb_data);
++}
++
++MACHINE_START(CAM60, "KwikByte CAM60")
++ /* Maintainer: KwikByte */
++ .phys_io = AT91_BASE_SYS,
++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
++ .boot_params = AT91_SDRAM_BASE + 0x100,
++ .timer = &at91sam926x_timer,
++ .map_io = cam60_map_io,
++ .init_irq = cam60_init_irq,
++ .init_machine = cam60_board_init,
++MACHINE_END
+Index: linux-2.6.22.1/arch/arm/configs/cam60_defconfig
+===================================================================
+--- linux-2.6.22.1/arch/arm/configs/cam60_defconfig (revision 0)
++++ linux-2.6.22.1/arch/arm/configs/cam60_defconfig (revision 0)
+@@ -0,0 +1,954 @@
+#
-+# CPU Frequency scaling
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.20
++# Tue May 1 21:06:33 2007
+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+CONFIG_CPU_FREQ_STAT=m
-+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
++CONFIG_ARM=y
++# CONFIG_GENERIC_TIME is not set
++CONFIG_MMU=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
- # Bus options
- #
- # CONFIG_ARCH_SUPPORTS_MSI is not set
-@@ -187,13 +211,8 @@ CONFIG_NET_KEY=y
- # CONFIG_NET_KEY_MIGRATE is not set
- CONFIG_INET=y
- CONFIG_IP_MULTICAST=y
--CONFIG_IP_ADVANCED_ROUTER=y
--CONFIG_ASK_IP_FIB_HASH=y
--# CONFIG_IP_FIB_TRIE is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
- CONFIG_IP_FIB_HASH=y
--# CONFIG_IP_MULTIPLE_TABLES is not set
--# CONFIG_IP_ROUTE_MULTIPATH is not set
--# CONFIG_IP_ROUTE_VERBOSE is not set
- CONFIG_IP_PNP=y
- CONFIG_IP_PNP_DHCP=y
- # CONFIG_IP_PNP_BOOTP is not set
-@@ -240,6 +259,7 @@ CONFIG_IPV6_SIT=y
- # CONFIG_NETWORK_SECMARK is not set
- CONFIG_NETFILTER=y
- # CONFIG_NETFILTER_DEBUG is not set
-+CONFIG_BRIDGE_NETFILTER=y
-
- #
- # Core Netfilter Configuration
-@@ -284,6 +304,7 @@ CONFIG_NETFILTER_XT_MATCH_MAC=m
- CONFIG_NETFILTER_XT_MATCH_MARK=m
- CONFIG_NETFILTER_XT_MATCH_POLICY=m
- CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
- CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
- CONFIG_NETFILTER_XT_MATCH_QUOTA=m
- CONFIG_NETFILTER_XT_MATCH_REALM=m
-@@ -359,13 +380,19 @@ CONFIG_IP6_NF_TARGET_REJECT=m
- CONFIG_IP6_NF_MANGLE=m
- CONFIG_IP6_NF_TARGET_HL=m
- CONFIG_IP6_NF_RAW=m
++# Code maturity level options
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
-+# Bridge: Netfilter Configuration
++# General setup
+#
-+# CONFIG_BRIDGE_NF_EBTABLES is not set
- # CONFIG_IP_DCCP is not set
- # CONFIG_IP_SCTP is not set
- # CONFIG_TIPC is not set
- # CONFIG_ATM is not set
--# CONFIG_BRIDGE is not set
-+CONFIG_BRIDGE=m
- CONFIG_VLAN_8021Q=m
- # CONFIG_DECNET is not set
-+CONFIG_LLC=m
- # CONFIG_LLC2 is not set
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
-@@ -521,7 +548,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- #
- # Misc devices
- #
--# CONFIG_BLINK is not set
- # CONFIG_IDE is not set
-
- #
-@@ -545,13 +571,26 @@ CONFIG_NETDEVICES=y
- # CONFIG_BONDING is not set
- # CONFIG_EQUALIZER is not set
- CONFIG_TUN=m
--# CONFIG_PHYLIB is not set
-+CONFIG_PHYLIB=y
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++# CONFIG_SWAP is not set
++CONFIG_SYSVIPC=y
++# CONFIG_IPC_NS is not set
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_UTS_NS is not set
++# CONFIG_AUDIT is not set
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++# CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SHMEM=y
++CONFIG_SLAB=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_SLOB is not set
+
+#
-+# MII PHY device drivers
++# Loadable module support
+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-
- #
- # Ethernet (10 or 100Mbit)
- #
- CONFIG_NET_ETHERNET=y
--CONFIG_MII=y
-+# CONFIG_MII is not set
- CONFIG_MACB=y
- # CONFIG_NETDEV_1000 is not set
- # CONFIG_NETDEV_10000 is not set
-@@ -625,7 +664,15 @@ CONFIG_UNIX98_PTYS=y
- # IPMI
- #
- # CONFIG_IPMI_HANDLER is not set
--# CONFIG_WATCHDOG is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
+
+#
-+# Watchdog Device Drivers
++# Block layer
+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32AP700X_WDT_TIMEOUT=2
- # CONFIG_HW_RANDOM is not set
- # CONFIG_RTC is not set
- # CONFIG_GEN_RTC is not set
-@@ -636,7 +683,42 @@ CONFIG_UNIX98_PTYS=y
- # TPM devices
- #
- # CONFIG_TCG_TPM is not set
--# CONFIG_I2C is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
+
+#
-+# I2C Algorithms
++# IO Schedulers
+#
-+CONFIG_I2C_ALGOBIT=m
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
-+# I2C Hardware Bus support
++# System Type
+#
-+CONFIG_I2C_ATMELTWI=m
-+CONFIG_I2C_ATMELTWI_BAUDRATE=100000
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_STUB is not set
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_CLPS7500 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CO285 is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_OMAP is not set
+
+#
-+# Miscellaneous I2C Chip support
++# Atmel AT91 System-on-Chip
+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-
- #
- # SPI support
-@@ -655,7 +737,7 @@ CONFIG_SPI_ATMEL=y
- # SPI Protocol Masters
- #
- # CONFIG_SPI_AT25 is not set
--# CONFIG_SPI_SPIDEV is not set
-+CONFIG_SPI_SPIDEV=m
-
- #
- # Dallas's 1-wire bus
-@@ -706,21 +788,59 @@ CONFIG_SPI_ATMEL=y
- #
- # USB Gadget Support
- #
--# CONFIG_USB_GADGET is not set
--# CONFIG_MMC is not set
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
++# CONFIG_ARCH_AT91RM9200 is not set
++CONFIG_ARCH_AT91SAM9260=y
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
+
+#
-+# MMC/SD Card Drivers
++# AT91SAM9260 Board Type
+#
-+CONFIG_MMC_BLOCK=y
++# CONFIG_MACH_AT91SAM9260EK is not set
++CONFIG_MACH_CAM60=y
+
+#
-+# MMC/SD Host Controller Drivers
++# AT91 Board Options
+#
-+CONFIG_MMC_ATMELMCI=y
-
- #
- # LED devices
- #
--# CONFIG_NEW_LEDS is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-
- #
- # LED drivers
- #
-+CONFIG_LEDS_GPIO=y
-
- #
- # LED Triggers
- #
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
- #
- # InfiniBand support
-@@ -733,7 +853,51 @@ CONFIG_SPI_ATMEL=y
- #
- # Real Time Clock
- #
--# CONFIG_RTC_CLASS is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
+
+#
-+# RTC interfaces
++# AT91 Feature Selections
+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
++# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+
+#
-+# I2C RTC drivers
++# Processor Type
+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
++CONFIG_CPU_32=y
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
+
+#
-+# SPI RTC drivers
++# Processor Features
+#
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_ARM_THUMB is not set
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
-+# Platform RTC drivers
++# Bus support
+#
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
+
+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT32AP700X=y
-
- #
- # DMA Engine support
-@@ -767,7 +931,8 @@ CONFIG_JBD=y
- # CONFIG_OCFS2_FS is not set
- # CONFIG_MINIX_FS is not set
- # CONFIG_ROMFS_FS is not set
--# CONFIG_INOTIFY is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
- # CONFIG_QUOTA is not set
- # CONFIG_DNOTIFY is not set
- # CONFIG_AUTOFS_FS is not set
-@@ -922,7 +1087,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
- CONFIG_ENABLE_MUST_CHECK=y
- CONFIG_MAGIC_SYSRQ=y
- # CONFIG_UNUSED_SYMBOLS is not set
--# CONFIG_DEBUG_FS is not set
-+CONFIG_DEBUG_FS=y
- # CONFIG_HEADERS_CHECK is not set
- CONFIG_DEBUG_KERNEL=y
- # CONFIG_DEBUG_SHIRQ is not set
-diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
-index 3b977fd..3708066 100644
---- a/arch/avr32/configs/atstk1002_defconfig
-+++ b/arch/avr32/configs/atstk1002_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.22-rc5
--# Sat Jun 23 15:32:08 2007
-+# Linux kernel version: 2.6.22.atmel.2
-+# Thu Jul 19 13:46:47 2007
- #
- CONFIG_AVR32=y
- CONFIG_GENERIC_GPIO=y
-@@ -80,10 +80,10 @@ CONFIG_BASE_SMALL=1
- #
- CONFIG_MODULES=y
- CONFIG_MODULE_UNLOAD=y
--# CONFIG_MODULE_FORCE_UNLOAD is not set
-+CONFIG_MODULE_FORCE_UNLOAD=y
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
--# CONFIG_KMOD is not set
-+CONFIG_KMOD=y
-
- #
- # Block layer
-@@ -99,12 +99,12 @@ CONFIG_BLOCK=y
- CONFIG_IOSCHED_NOOP=y
- # CONFIG_IOSCHED_AS is not set
- # CONFIG_IOSCHED_DEADLINE is not set
--# CONFIG_IOSCHED_CFQ is not set
-+CONFIG_IOSCHED_CFQ=y
- # CONFIG_DEFAULT_AS is not set
- # CONFIG_DEFAULT_DEADLINE is not set
--# CONFIG_DEFAULT_CFQ is not set
--CONFIG_DEFAULT_NOOP=y
--CONFIG_DEFAULT_IOSCHED="noop"
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-
- #
- # System Type and features
-@@ -117,6 +117,11 @@ CONFIG_CPU_AT32AP7000=y
- CONFIG_BOARD_ATSTK1002=y
- CONFIG_BOARD_ATSTK1000=y
- # CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_ATSTK1002_CUSTOM is not set
-+# CONFIG_BOARD_ATSTK1002_SPI1 is not set
-+# CONFIG_BOARD_ATSTK1002_J2_LED is not set
-+# CONFIG_BOARD_ATSTK1002_J2_LED8 is not set
-+# CONFIG_BOARD_ATSTK1002_J2_RGB is not set
- CONFIG_LOADER_U_BOOT=y
-
- #
-@@ -125,6 +130,7 @@ CONFIG_LOADER_U_BOOT=y
- # CONFIG_AP7000_32_BIT_SMC is not set
- CONFIG_AP7000_16_BIT_SMC=y
- # CONFIG_AP7000_8_BIT_SMC is not set
-+CONFIG_GPIO_DEV=y
- CONFIG_LOAD_ADDRESS=0x10000000
- CONFIG_ENTRY_ADDRESS=0x90000000
- CONFIG_PHYS_OFFSET=0x10000000
-@@ -148,6 +154,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
- # CONFIG_RESOURCES_64BIT is not set
- CONFIG_ZONE_DMA_FLAG=0
- # CONFIG_OWNERSHIP_TRACE is not set
-+CONFIG_DW_DMAC=y
- # CONFIG_HZ_100 is not set
- CONFIG_HZ_250=y
- # CONFIG_HZ_300 is not set
-@@ -156,6 +163,27 @@ CONFIG_HZ=250
- CONFIG_CMDLINE=""
-
- #
-+# Power managment options
++# PCCARD (PCMCIA/CardBus) support
+#
++# CONFIG_PCCARD is not set
+
+#
-+# CPU Frequency scaling
++# Kernel Features
+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+CONFIG_CPU_FREQ_STAT=m
-+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
++# CONFIG_PREEMPT is not set
++# CONFIG_NO_IDLE_HZ is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_RESOURCES_64BIT is not set
++# CONFIG_LEDS is not set
++CONFIG_ALIGNMENT_TRAP=y
+
+#
- # Bus options
- #
- # CONFIG_ARCH_SUPPORTS_MSI is not set
-@@ -327,6 +355,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- #
- # Self-contained MTD device drivers
- #
-+CONFIG_MTD_DATAFLASH=m
-+# CONFIG_MTD_M25P80 is not set
- # CONFIG_MTD_SLRAM is not set
- # CONFIG_MTD_PHRAM is not set
- # CONFIG_MTD_MTDRAM is not set
-@@ -373,7 +403,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- #
- # Misc devices
- #
--# CONFIG_BLINK is not set
-+CONFIG_ATMEL_SSC=m
- # CONFIG_IDE is not set
-
- #
-@@ -397,13 +427,26 @@ CONFIG_DUMMY=y
- # CONFIG_BONDING is not set
- # CONFIG_EQUALIZER is not set
- CONFIG_TUN=m
--# CONFIG_PHYLIB is not set
-+CONFIG_PHYLIB=y
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x22000000
++CONFIG_ZBOOT_ROM_BSS=0x20004000
++# CONFIG_ZBOOT_ROM is not set
++CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock3 rootfstype=jffs2 mem=64M"
++# CONFIG_XIP_KERNEL is not set
+
+#
-+# MII PHY device drivers
++# Floating point emulation
+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+CONFIG_LXT_PHY=y
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_FIXED_PHY is not set
-
- #
- # Ethernet (10 or 100Mbit)
- #
- CONFIG_NET_ETHERNET=y
--CONFIG_MII=y
-+# CONFIG_MII is not set
- CONFIG_MACB=y
- # CONFIG_NETDEV_1000 is not set
- # CONFIG_NETDEV_10000 is not set
-@@ -443,7 +486,42 @@ CONFIG_SLHC=m
- #
- # Input device support
- #
--# CONFIG_INPUT is not set
-+CONFIG_INPUT=m
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+CONFIG_INPUT_POLLDEV=m
+
+#
-+# Userland interfaces
++# At least one emulation must be selected
+#
-+CONFIG_INPUT_MOUSEDEV=m
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_TSDEV is not set
-+# CONFIG_INPUT_EVDEV is not set
-+# CONFIG_INPUT_EVBUG is not set
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++# CONFIG_VFP is not set
+
+#
-+# Input Device Drivers
++# Userspace binary formats
+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+CONFIG_KEYBOARD_GPIO=m
-+CONFIG_INPUT_MOUSE=y
-+# CONFIG_MOUSE_PS2 is not set
-+# CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_VSXXXAA is not set
-+CONFIG_MOUSE_GPIO=m
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-
- #
- # Hardware I/O ports
-@@ -477,7 +555,15 @@ CONFIG_UNIX98_PTYS=y
- # IPMI
- #
- # CONFIG_IPMI_HANDLER is not set
--# CONFIG_WATCHDOG is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_ARTHUR is not set
+
+#
-+# Watchdog Device Drivers
++# Power management options
+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32AP700X_WDT_TIMEOUT=2
- # CONFIG_HW_RANDOM is not set
- # CONFIG_RTC is not set
- # CONFIG_GEN_RTC is not set
-@@ -488,13 +574,61 @@ CONFIG_UNIX98_PTYS=y
- # TPM devices
- #
- # CONFIG_TCG_TPM is not set
--# CONFIG_I2C is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
++# CONFIG_PM is not set
++# CONFIG_APM is not set
+
+#
-+# I2C Algorithms
++# Networking
+#
-+CONFIG_I2C_ALGOBIT=m
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
++CONFIG_NET=y
+
+#
-+# I2C Hardware Bus support
++# Networking options
+#
-+CONFIG_I2C_ATMELTWI=m
-+CONFIG_I2C_ATMELTWI_BAUDRATE=100000
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_STUB is not set
++# CONFIG_NETDEBUG is not set
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
+
+#
-+# Miscellaneous I2C Chip support
++# DCCP Configuration (EXPERIMENTAL)
+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-
- #
- # SPI support
- #
--# CONFIG_SPI is not set
--# CONFIG_SPI_MASTER is not set
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
++# CONFIG_IP_DCCP is not set
+
+#
-+# SPI Master Controller Drivers
++# SCTP Configuration (EXPERIMENTAL)
+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
++# CONFIG_IP_SCTP is not set
+
+#
-+# SPI Protocol Masters
++# TIPC Configuration (EXPERIMENTAL)
+#
-+# CONFIG_SPI_AT25 is not set
-+CONFIG_SPI_SPIDEV=m
-
- #
- # Dallas's 1-wire bus
-@@ -517,19 +651,91 @@ CONFIG_UNIX98_PTYS=y
- #
- # Graphics support
- #
--# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_LCD_CLASS_DEVICE=y
-+CONFIG_LCD_LTV350QV=y
-+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
- #
- # Display device support
- #
- # CONFIG_DISPLAY_SUPPORT is not set
- # CONFIG_VGASTATE is not set
--# CONFIG_FB is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+CONFIG_FB_DEFERRED_IO=y
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
+
+#
-+# Frame buffer hardware drivers
++# QoS and/or fair queueing
+#
-+# CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_ATMEL=y
-+# CONFIG_FB_VIRTUAL is not set
-+# CONFIG_LOGO is not set
-
- #
- # Sound
- #
--# CONFIG_SOUND is not set
-+CONFIG_SOUND=m
++# CONFIG_NET_SCHED is not set
+
+#
-+# Advanced Linux Sound Architecture
++# Network testing
+#
-+CONFIG_SND=m
-+CONFIG_SND_TIMER=m
-+CONFIG_SND_PCM=m
-+# CONFIG_SND_SEQUENCER is not set
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+CONFIG_SND_VERBOSE_PROCFS=y
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_IEEE80211 is not set
+
+#
-+# Generic devices
++# Device Drivers
+#
-+# CONFIG_SND_DUMMY is not set
-+# CONFIG_SND_MTPAV is not set
-+# CONFIG_SND_SERIAL_U16550 is not set
-+# CONFIG_SND_MPU401 is not set
+
+#
-+# SPI devices
++# Generic Driver Options
+#
-+CONFIG_SND_AT73C213=m
-+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_SYS_HYPERVISOR is not set
+
+#
-+# System on Chip audio support
++# Connector - unified userspace <-> kernelspace linker
+#
-+# CONFIG_SND_SOC is not set
++# CONFIG_CONNECTOR is not set
+
+#
-+# Open Sound System
++# Memory Technology Devices (MTD)
+#
-+# CONFIG_SOUND_PRIME is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
+
+#
-+# HID Devices
++# User Modules And Translation Layers
+#
-+# CONFIG_HID is not set
-
- #
- # USB support
-@@ -545,21 +751,59 @@ CONFIG_UNIX98_PTYS=y
- #
- # USB Gadget Support
- #
--# CONFIG_USB_GADGET is not set
--# CONFIG_MMC is not set
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
+
+#
-+# MMC/SD Card Drivers
++# RAM/ROM/Flash chip drivers
+#
-+CONFIG_MMC_BLOCK=y
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++# CONFIG_MTD_CFI_AMDSTD is not set
++# CONFIG_MTD_CFI_STAA is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
-+# MMC/SD Host Controller Drivers
++# Mapping drivers for chip access
+#
-+CONFIG_MMC_ATMELMCI=y
-
- #
- # LED devices
- #
--# CONFIG_NEW_LEDS is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=m
-
- #
- # LED drivers
- #
-+CONFIG_LEDS_GPIO=m
-
- #
- # LED Triggers
- #
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=m
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-
- #
- # InfiniBand support
-@@ -572,7 +816,50 @@ CONFIG_UNIX98_PTYS=y
- #
- # Real Time Clock
- #
--# CONFIG_RTC_CLASS is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+# CONFIG_RTC_HCTOSYS is not set
-+# CONFIG_RTC_DEBUG is not set
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++# CONFIG_MTD_PHYSMAP is not set
++# CONFIG_MTD_ARM_INTEGRATOR is not set
++# CONFIG_MTD_PLATRAM is not set
+
+#
-+# RTC interfaces
++# Self-contained MTD device drivers
+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
++CONFIG_MTD_DATAFLASH=y
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
+
+#
-+# I2C RTC drivers
++# Disk-On-Chip Device Drivers
+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
+
+#
-+# SPI RTC drivers
++# NAND Flash Device Drivers
+#
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_MTD_NAND is not set
+
+#
-+# Platform RTC drivers
++# OneNAND Flash Device Drivers
+#
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
++# CONFIG_MTD_ONENAND is not set
+
+#
-+# on-CPU RTC drivers
++# Parallel port support
+#
-+CONFIG_RTC_DRV_AT32AP700X=y
-
- #
- # DMA Engine support
-@@ -590,11 +877,14 @@ CONFIG_UNIX98_PTYS=y
- #
- # File systems
- #
--CONFIG_EXT2_FS=m
-+CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
- # CONFIG_EXT2_FS_XIP is not set
--# CONFIG_EXT3_FS is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
- # CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
- # CONFIG_FS_POSIX_ACL is not set
-@@ -609,7 +899,7 @@ CONFIG_INOTIFY_USER=y
- # CONFIG_DNOTIFY is not set
- # CONFIG_AUTOFS_FS is not set
- # CONFIG_AUTOFS4_FS is not set
--# CONFIG_FUSE_FS is not set
-+CONFIG_FUSE_FS=m
-
- #
- # CD-ROM/DVD Filesystems
-@@ -638,7 +928,7 @@ CONFIG_TMPFS=y
- # CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
- CONFIG_RAMFS=y
--CONFIG_CONFIGFS_FS=m
-+CONFIG_CONFIGFS_FS=y
-
- #
- # Miscellaneous filesystems
-@@ -683,8 +973,14 @@ CONFIG_SUNRPC=y
- # CONFIG_SUNRPC_BIND34 is not set
- # CONFIG_RPCSEC_GSS_KRB5 is not set
- # CONFIG_RPCSEC_GSS_SPKM3 is not set
--# CONFIG_SMB_FS is not set
--# CONFIG_CIFS is not set
-+CONFIG_SMB_FS=m
-+# CONFIG_SMB_NLS_DEFAULT is not set
-+CONFIG_CIFS=m
-+# CONFIG_CIFS_STATS is not set
-+# CONFIG_CIFS_WEAK_PW_HASH is not set
-+# CONFIG_CIFS_XATTR is not set
-+# CONFIG_CIFS_DEBUG2 is not set
-+# CONFIG_CIFS_EXPERIMENTAL is not set
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
- # CONFIG_AFS_FS is not set
-diff --git a/arch/avr32/drivers/Makefile b/arch/avr32/drivers/Makefile
-new file mode 100644
-index 0000000..b429b75
---- /dev/null
-+++ b/arch/avr32/drivers/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_DW_DMAC) += dw-dmac.o
-diff --git a/arch/avr32/drivers/dw-dmac.c b/arch/avr32/drivers/dw-dmac.c
-new file mode 100644
-index 0000000..224eb30
---- /dev/null
-+++ b/arch/avr32/drivers/dw-dmac.c
-@@ -0,0 +1,761 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+
-+#include "dw-dmac.h"
-+
-+#define DMAC_NR_CHANNELS 3
-+#define DMAC_MAX_BLOCKSIZE 4095
-+
-+enum {
-+ CH_STATE_FREE = 0,
-+ CH_STATE_ALLOCATED,
-+ CH_STATE_BUSY,
-+};
-+
-+struct dw_dma_lli {
-+ dma_addr_t sar;
-+ dma_addr_t dar;
-+ dma_addr_t llp;
-+ u32 ctllo;
-+ u32 ctlhi;
-+ u32 sstat;
-+ u32 dstat;
-+};
++# CONFIG_PARPORT is not set
+
-+struct dw_dma_block {
-+ struct dw_dma_lli *lli_vaddr;
-+ dma_addr_t lli_dma_addr;
-+};
-+
-+struct dw_dma_channel {
-+ unsigned int state;
-+ int is_cyclic;
-+ struct dma_request_sg *req_sg;
-+ struct dma_request_cyclic *req_cyclic;
-+ unsigned int nr_blocks;
-+ int direction;
-+ struct dw_dma_block *block;
-+};
-+
-+struct dw_dma_controller {
-+ spinlock_t lock;
-+ void * __iomem regs;
-+ struct dma_pool *lli_pool;
-+ struct clk *hclk;
-+ struct dma_controller dma;
-+ struct dw_dma_channel channel[DMAC_NR_CHANNELS];
-+};
-+#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
-+
-+#define dmac_writel_hi(dmac, reg, value) \
-+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_readl_hi(dmac, reg) \
-+ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_writel_lo(dmac, reg, value) \
-+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
-+#define dmac_readl_lo(dmac, reg) \
-+ __raw_readl((dmac)->regs + DW_DMAC_##reg)
-+#define dmac_chan_writel_hi(dmac, chan, reg, value) \
-+ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
-+ + DW_DMAC_CHAN_##reg + 4))
-+#define dmac_chan_readl_hi(dmac, chan, reg) \
-+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
-+#define dmac_chan_writel_lo(dmac, chan, reg, value) \
-+ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define dmac_chan_readl_lo(dmac, chan, reg) \
-+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define set_channel_bit(dmac, reg, chan) \
-+ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
-+#define clear_channel_bit(dmac, reg, chan) \
-+ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
-+
-+static int dmac_alloc_channel(struct dma_controller *_dmac)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long flags;
-+ int i;
-+
-+ spin_lock_irqsave(&dmac->lock, flags);
-+ for (i = 0; i < DMAC_NR_CHANNELS; i++)
-+ if (dmac->channel[i].state == CH_STATE_FREE)
-+ break;
-+
-+ if (i < DMAC_NR_CHANNELS) {
-+ chan = &dmac->channel[i];
-+ chan->state = CH_STATE_ALLOCATED;
-+ } else {
-+ i = -EBUSY;
-+ }
-+
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+ return i;
-+}
-+
-+static void dmac_release_channel(struct dma_controller *_dmac, int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++#
++# Plug and Play support
++#
+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[channel].state != CH_STATE_ALLOCATED);
++#
++# Block devices
++#
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=8192
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
+
-+ dmac->channel[channel].state = CH_STATE_FREE;
-+}
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_NETLINK is not set
+
-+static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
-+ unsigned int nr_blocks)
-+{
-+ struct dw_dma_block *block;
-+ void *p;
-+ unsigned int i;
++#
++# Serial ATA (prod) and Parallel ATA (experimental) drivers
++#
++# CONFIG_ATA is not set
+
-+ block = kmalloc(nr_blocks * sizeof(*block),
-+ GFP_KERNEL);
-+ if (unlikely(!block))
-+ return NULL;
++#
++# Multi-device support (RAID and LVM)
++#
++# CONFIG_MD is not set
+
-+ for (i = 0; i < nr_blocks; i++) {
-+ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
-+ &block[i].lli_dma_addr);
-+ block[i].lli_vaddr = p;
-+ if (unlikely(!p))
-+ goto fail;
-+ }
++#
++# Fusion MPT device support
++#
++# CONFIG_FUSION is not set
+
-+ return block;
++#
++# IEEE 1394 (FireWire) support
++#
+
-+fail:
-+ for (i = 0; i < nr_blocks; i++) {
-+ if (!block[i].lli_vaddr)
-+ break;
-+ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
-+ block[i].lli_dma_addr);
-+ }
-+ kfree(block);
-+ return NULL;
-+}
++#
++# I2O device support
++#
+
-+static void cleanup_channel(struct dw_dma_controller *dmac,
-+ struct dw_dma_channel *chan)
-+{
-+ unsigned int i;
++#
++# Network device support
++#
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
+
-+ if (chan->nr_blocks > 1) {
-+ for (i = 0; i < chan->nr_blocks; i++)
-+ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
-+ chan->block[i].lli_dma_addr);
-+ kfree(chan->block);
-+ }
++#
++# PHY device support
++#
++# CONFIG_PHYLIB is not set
+
-+ chan->state = CH_STATE_ALLOCATED;
-+}
++#
++# Ethernet (10 or 100Mbit)
++#
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++CONFIG_MACB=y
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
+
-+static int dmac_prepare_request_sg(struct dma_controller *_dmac,
-+ struct dma_request_sg *req)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long ctlhi, ctllo, cfghi, cfglo;
-+ unsigned long block_size;
-+ unsigned int nr_blocks;
-+ int ret, i, direction;
-+ unsigned long flags;
++#
++# Ethernet (1000 Mbit)
++#
+
-+ spin_lock_irqsave(&dmac->lock, flags);
++#
++# Ethernet (10000 Mbit)
++#
+
-+ ret = -EINVAL;
-+ if (req->req.channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+ || req->block_size > DMAC_MAX_BLOCKSIZE) {
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+ return -EINVAL;
-+ }
++#
++# Token Ring devices
++#
+
-+ chan = &dmac->channel[req->req.channel];
-+ chan->state = CH_STATE_BUSY;
-+ chan->req_sg = req;
-+ chan->is_cyclic = 0;
++#
++# Wireless LAN (non-hamradio)
++#
++# CONFIG_NET_RADIO is not set
+
-+ /*
-+ * We have marked the channel as busy, so no need to keep the
-+ * lock as long as we only touch the channel-specific
-+ * registers
-+ */
-+ spin_unlock_irqrestore(&dmac->lock, flags);
++#
++# Wan interfaces
++#
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
+
-+ /*
-+ * There may be limitations in the driver and/or the DMA
-+ * controller that prevents us from sending a whole
-+ * scatterlist item in one go. Taking this into account,
-+ * calculate the number of block transfers we need to set up.
-+ *
-+ * FIXME: Let the peripheral driver know about the maximum
-+ * block size we support. We really don't want to use a
-+ * different block size than what was suggested by the
-+ * peripheral.
-+ *
-+ * Each block will get its own Linked List Item (LLI) below.
-+ */
-+ block_size = req->block_size;
-+ nr_blocks = req->nr_blocks;
-+ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
-+ block_size, nr_blocks, req->nr_sg);
++#
++# ISDN subsystem
++#
++# CONFIG_ISDN is not set
+
-+ BUG_ON(nr_blocks == 0);
-+ chan->nr_blocks = nr_blocks;
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
+
-+ ret = -EINVAL;
-+ cfglo = cfghi = 0;
-+ switch (req->direction) {
-+ case DMA_DIR_MEM_TO_PERIPH:
-+ direction = DMA_TO_DEVICE;
-+ cfghi = req->periph_id << (43 - 32);
-+ break;
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
+
-+ case DMA_DIR_PERIPH_TO_MEM:
-+ direction = DMA_FROM_DEVICE;
-+ cfghi = req->periph_id << (39 - 32);
-+ break;
-+ default:
-+ goto out_unclaim_channel;
-+ }
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
+
-+ chan->direction = direction;
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
+
-+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
+
-+ ctlhi = block_size >> req->width;
-+ ctllo = ((req->direction << 20)
-+ // | (1 << 14) | (1 << 11) // source/dest burst trans len
-+ | (req->width << 4) | (req->width << 1)
-+ | (1 << 0)); // interrupt enable
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
+
-+ if (nr_blocks == 1) {
-+ /* Only one block: No need to use block chaining */
-+ if (direction == DMA_TO_DEVICE) {
-+ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+ req->sg->dma_address);
-+ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+ req->data_reg);
-+ ctllo |= 2 << 7; // no dst increment
-+ } else {
-+ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+ req->data_reg);
-+ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+ req->sg->dma_address);
-+ ctllo |= 2 << 9; // no src increment
-+ }
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
-+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
-+ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
-+ } else {
-+ struct dw_dma_lli *lli, *lli_prev = NULL;
-+ int j = 0, offset = 0;
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
+
-+ ret = -ENOMEM;
-+ chan->block = allocate_blocks(dmac, nr_blocks);
-+ if (!chan->block)
-+ goto out_unclaim_channel;
++#
++# IPMI
++#
++# CONFIG_IPMI_HANDLER is not set
+
-+ if (direction == DMA_TO_DEVICE)
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+ else
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++#
++# Watchdog Cards
++#
++# CONFIG_WATCHDOG is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_DTLK is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
+
-+ /*
-+ * Map scatterlist items to blocks. One scatterlist
-+ * item may need more than one block for the reasons
-+ * mentioned above.
-+ */
-+ for (i = 0; i < nr_blocks; i++) {
-+ lli = chan->block[i].lli_vaddr;
-+ if (lli_prev) {
-+ lli_prev->llp = chan->block[i].lli_dma_addr;
-+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr,
-+ lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);
-+ }
-+ lli->llp = 0;
-+ lli->ctllo = ctllo;
-+ lli->ctlhi = ctlhi;
-+ if (direction == DMA_TO_DEVICE) {
-+ lli->sar = req->sg[j].dma_address + offset;
-+ lli->dar = req->data_reg;
-+ } else {
-+ lli->sar = req->data_reg;
-+ lli->dar = req->sg[j].dma_address + offset;
-+ }
-+ lli_prev = lli;
++#
++# TPM devices
++#
++# CONFIG_TCG_TPM is not set
+
-+ offset += block_size;
-+ if (offset > req->sg[j].length) {
-+ j++;
-+ offset = 0;
-+ }
-+ }
++#
++# I2C support
++#
++# CONFIG_I2C is not set
+
-+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+ lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);
++#
++# SPI support
++#
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
+
-+ /*
-+ * SAR, DAR and CTL are initialized from the LLI. We
-+ * only have to enable the LLI bits in CTL.
-+ */
-+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
-+ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+ chan->block[0].lli_dma_addr);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+ }
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
+
-+ set_channel_bit(dmac, MASK_XFER, req->req.channel);
-+ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+ if (req->req.block_complete)
-+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+ else
-+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++#
++# SPI Protocol Masters
++#
+
-+ return 0;
++#
++# Dallas's 1-wire bus
++#
++# CONFIG_W1 is not set
+
-+out_unclaim_channel:
-+ chan->state = CH_STATE_ALLOCATED;
-+ return ret;
-+}
++#
++# Hardware Monitoring support
++#
++# CONFIG_HWMON is not set
++# CONFIG_HWMON_VID is not set
+
-+static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
-+ struct dma_request_cyclic *req)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long ctlhi, ctllo, cfghi, cfglo;
-+ unsigned long block_size;
-+ int ret, i, direction;
-+ unsigned long flags;
++#
++# Misc devices
++#
++# CONFIG_TIFM_CORE is not set
+
-+ spin_lock_irqsave(&dmac->lock, flags);
++#
++# LED devices
++#
++# CONFIG_NEW_LEDS is not set
+
-+ block_size = (req->buffer_size/req->periods) >> req->width;
++#
++# LED drivers
++#
+
-+ ret = -EINVAL;
-+ if (req->req.channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+ || (req->periods == 0)
-+ || block_size > DMAC_MAX_BLOCKSIZE) {
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+ return -EINVAL;
-+ }
++#
++# LED Triggers
++#
+
-+ chan = &dmac->channel[req->req.channel];
-+ chan->state = CH_STATE_BUSY;
-+ chan->is_cyclic = 1;
-+ chan->req_cyclic = req;
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
+
-+ /*
-+ * We have marked the channel as busy, so no need to keep the
-+ * lock as long as we only touch the channel-specific
-+ * registers
-+ */
-+ spin_unlock_irqrestore(&dmac->lock, flags);
++#
++# Digital Video Broadcasting Devices
++#
++# CONFIG_DVB is not set
+
-+ /*
-+ Setup
-+ */
-+ BUG_ON(req->buffer_size % req->periods);
-+ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
++#
++# Graphics support
++#
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB is not set
+
-+ chan->nr_blocks = req->periods;
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
-+ ret = -EINVAL;
-+ cfglo = cfghi = 0;
-+ switch (req->direction) {
-+ case DMA_DIR_MEM_TO_PERIPH:
-+ direction = DMA_TO_DEVICE;
-+ cfghi = req->periph_id << (43 - 32);
-+ break;
++#
++# Sound
++#
++# CONFIG_SOUND is not set
+
-+ case DMA_DIR_PERIPH_TO_MEM:
-+ direction = DMA_FROM_DEVICE;
-+ cfghi = req->periph_id << (39 - 32);
-+ break;
-+ default:
-+ goto out_unclaim_channel;
-+ }
++#
++# HID Devices
++#
++# CONFIG_HID is not set
+
-+ chan->direction = direction;
++#
++# USB support
++#
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++# CONFIG_USB is not set
+
-+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
+
-+ ctlhi = block_size;
-+ ctllo = ((req->direction << 20)
-+ | (req->width << 4) | (req->width << 1)
-+ | (1 << 0)); // interrupt enable
++#
++# USB Gadget Support
++#
++# CONFIG_USB_GADGET is not set
+
-+ {
-+ struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
++#
++# MMC/SD Card support
++#
++# CONFIG_MMC is not set
+
-+ ret = -ENOMEM;
-+ chan->block = allocate_blocks(dmac, req->periods);
-+ if (!chan->block)
-+ goto out_unclaim_channel;
++#
++# Real Time Clock
++#
++CONFIG_RTC_LIB=y
++# CONFIG_RTC_CLASS is not set
+
-+ if (direction == DMA_TO_DEVICE)
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+ else
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
++# CONFIG_AUTOFS_FS is not set
++CONFIG_AUTOFS4_FS=y
++# CONFIG_FUSE_FS is not set
+
-+ /*
-+ * Set up a linked list items where each period gets
-+ * an item. The linked list item for the last period
-+ * points back to the star of the buffer making a
-+ * cyclic buffer.
-+ */
-+ for (i = 0; i < req->periods; i++) {
-+ lli = chan->block[i].lli_vaddr;
-+ if (lli_prev) {
-+ lli_prev->llp = chan->block[i].lli_dma_addr;
-+ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr,
-+ lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);*/
-+ }
-+ lli->llp = 0;
-+ lli->ctllo = ctllo;
-+ lli->ctlhi = ctlhi;
-+ if (direction == DMA_TO_DEVICE) {
-+ lli->sar = req->buffer_start + i*(block_size << req->width);
-+ lli->dar = req->data_reg;
-+ } else {
-+ lli->sar = req->data_reg;
-+ lli->dar = req->buffer_start + i*(block_size << req->width);
-+ }
-+ lli_prev = lli;
-+ }
-+ lli->llp = chan->block[0].lli_dma_addr;
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
+
-+ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+ lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi); */
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++# CONFIG_MSDOS_FS is not set
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
+
-+ /*
-+ * SAR, DAR and CTL are initialized from the LLI. We
-+ * only have to enable the LLI bits in CTL.
-+ */
-+ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+ chan->block[0].lli_dma_addr);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+ }
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
++# CONFIG_CONFIGFS_FS is not set
+
-+ clear_channel_bit(dmac, MASK_XFER, req->req.channel);
-+ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+ if (req->req.block_complete)
-+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+ else
-+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
+
-+ return 0;
++#
++# Network File Systems
++#
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++# CONFIG_9P_FS is not set
+
-+out_unclaim_channel:
-+ chan->state = CH_STATE_ALLOCATED;
-+ return ret;
-+}
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
+
-+static int dmac_start_request(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++#
++# Native Language Support
++#
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
++#
++# Distributed Lock Manager
++#
++# CONFIG_DLM is not set
+
-+ set_channel_bit(dmac, CH_EN, channel);
++#
++# Profiling support
++#
++# CONFIG_PROFILING is not set
+
-+ return 0;
-+}
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_RWSEMS is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++CONFIG_FRAME_POINTER=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_RCU_TORTURE_TEST is not set
++CONFIG_DEBUG_USER=y
++# CONFIG_DEBUG_ERRORS is not set
++CONFIG_DEBUG_LL=y
++# CONFIG_DEBUG_ICEDCC is not set
+
-+static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ dma_addr_t current_pos;
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
++#
++# Cryptographic options
++#
++# CONFIG_CRYPTO is not set
+
-+ chan = &dmac->channel[channel];
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++CONFIG_CRC32=y
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_IOMAP_COPY=y
+Index: linux-2.6.22.1/arch/arm/configs/kb9202_defconfig
+===================================================================
+--- linux-2.6.22.1/arch/arm/configs/kb9202_defconfig (revision 1)
++++ linux-2.6.22.1/arch/arm/configs/kb9202_defconfig (arbetskopia)
+@@ -1,19 +1,31 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.13-rc2
+-# Sun Aug 14 19:26:59 2005
++# Linux kernel version: 2.6.21
++# Mon May 7 11:43:14 2007
+ #
+ CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_GENERIC_TIME is not set
+ CONFIG_MMU=y
+-CONFIG_UID16=y
++# CONFIG_NO_IOPORT is not set
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+ #
+ # Code maturity level options
+ #
+-# CONFIG_EXPERIMENTAL is not set
+-CONFIG_CLEAN_COMPILE=y
++CONFIG_EXPERIMENTAL=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+
+@@ -21,54 +33,103 @@
+ # General setup
+ #
+ CONFIG_LOCALVERSION=""
+-# CONFIG_SWAP is not set
+-# CONFIG_SYSVIPC is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++# CONFIG_IPC_NS is not set
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++# CONFIG_BSD_PROCESS_ACCT_V3 is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_UTS_NS is not set
++CONFIG_AUDIT=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+ CONFIG_SYSCTL=y
+-# CONFIG_AUDIT is not set
+-CONFIG_HOTPLUG=y
+-# CONFIG_KOBJECT_UEVENT is not set
+-# CONFIG_IKCONFIG is not set
+ # CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
+ CONFIG_KALLSYMS=y
+ # CONFIG_KALLSYMS_ALL is not set
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_KALLSYMS_EXTRA_PASS=y
++CONFIG_HOTPLUG=y
+ CONFIG_PRINTK=y
+ CONFIG_BUG=y
++CONFIG_ELF_CORE=y
+ CONFIG_BASE_FULL=y
+ CONFIG_FUTEX=y
+ CONFIG_EPOLL=y
+-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SHMEM=y
+-CONFIG_CC_ALIGN_FUNCTIONS=0
+-CONFIG_CC_ALIGN_LABELS=0
+-CONFIG_CC_ALIGN_LOOPS=0
+-CONFIG_CC_ALIGN_JUMPS=0
++CONFIG_SLAB=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
++# CONFIG_SLOB is not set
+
+ #
+ # Loadable module support
+ #
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+-CONFIG_OBSOLETE_MODPARM=y
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++CONFIG_MODVERSIONS=y
++CONFIG_MODULE_SRCVERSION_ALL=y
+ CONFIG_KMOD=y
+
+ #
++# Block layer
++#
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
+
-+ switch (chan->direction) {
-+ case DMA_TO_DEVICE:
-+ current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
-+ break;
-+ case DMA_FROM_DEVICE:
-+ current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
-+ break;
-+ default:
-+ return 0;
-+ }
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
+
++#
+ # System Type
+ #
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++CONFIG_ARCH_AT91=y
+ # CONFIG_ARCH_CLPS7500 is not set
+ # CONFIG_ARCH_CLPS711X is not set
+ # CONFIG_ARCH_CO285 is not set
+ # CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
+ # CONFIG_ARCH_FOOTBRIDGE is not set
+-# CONFIG_ARCH_INTEGRATOR is not set
+-# CONFIG_ARCH_IOP3XX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IOP13XX is not set
+ # CONFIG_ARCH_IXP4XX is not set
+ # CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP23XX is not set
+ # CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_PNX4008 is not set
+ # CONFIG_ARCH_PXA is not set
+ # CONFIG_ARCH_RPC is not set
+ # CONFIG_ARCH_SA1100 is not set
+@@ -76,34 +137,52 @@
+ # CONFIG_ARCH_SHARK is not set
+ # CONFIG_ARCH_LH7A40X is not set
+ # CONFIG_ARCH_OMAP is not set
+-# CONFIG_ARCH_VERSATILE is not set
+-# CONFIG_ARCH_IMX is not set
+-# CONFIG_ARCH_H720X is not set
+-# CONFIG_ARCH_AAEC2000 is not set
+-CONFIG_ARCH_AT91=y
+
-+ if (!current_pos) {
-+ if (chan->is_cyclic) {
-+ current_pos = chan->req_cyclic->buffer_start;
-+ } else {
-+ current_pos = chan->req_sg->sg->dma_address;
-+ }
-+ }
++#
++# Atmel AT91 System-on-Chip
++#
+ CONFIG_ARCH_AT91RM9200=y
++# CONFIG_ARCH_AT91SAM9260 is not set
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
+
+ #
+-# AT91RM9200 Implementations
++# AT91RM9200 Board Type
+ #
++# CONFIG_MACH_ONEARM is not set
+ # CONFIG_ARCH_AT91RM9200DK is not set
+ # CONFIG_MACH_AT91RM9200EK is not set
+ # CONFIG_MACH_CSB337 is not set
+ # CONFIG_MACH_CSB637 is not set
+ # CONFIG_MACH_CARMEVA is not set
++# CONFIG_MACH_ATEB9200 is not set
+ CONFIG_MACH_KB9200=y
++# CONFIG_MACH_KAFA is not set
++# CONFIG_MACH_CHUB is not set
+
+ #
++# AT91 Board Options
++#
+
-+ return current_pos;
-+}
++#
++# AT91 Feature Selections
++#
++# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++# CONFIG_ATMEL_TCLIB is not set
+
++#
+ # Processor Type
+ #
+ CONFIG_CPU_32=y
+ CONFIG_CPU_ARM920T=y
+-CONFIG_CPU_32v4=y
++CONFIG_CPU_32v4T=y
+ CONFIG_CPU_ABRT_EV4T=y
+ CONFIG_CPU_CACHE_V4WT=y
+ CONFIG_CPU_CACHE_VIVT=y
+ CONFIG_CPU_COPY_V4WB=y
+ CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
+
+ #
+ # Processor Features
+@@ -112,24 +191,44 @@
+ # CONFIG_CPU_ICACHE_DISABLE is not set
+ # CONFIG_CPU_DCACHE_DISABLE is not set
+ # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_OUTER_CACHE is not set
+
+ #
+ # Bus support
+ #
+-CONFIG_ISA_DMA_API=y
+
+ #
+ # PCCARD (PCMCIA/CardBus) support
+ #
+-# CONFIG_PCCARD is not set
++CONFIG_PCCARD=m
++# CONFIG_PCMCIA_DEBUG is not set
++CONFIG_PCMCIA=m
++CONFIG_PCMCIA_LOAD_CIS=y
++CONFIG_PCMCIA_IOCTL=y
+
+ #
++# PC-card bridges
++#
++# CONFIG_AT91_CF is not set
+
-+static int dmac_stop_request(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
++#
+ # Kernel Features
+ #
++# CONFIG_PREEMPT is not set
+ # CONFIG_NO_IDLE_HZ is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
+ # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
+ # CONFIG_LEDS is not set
+ CONFIG_ALIGNMENT_TRAP=y
+
+@@ -138,8 +237,10 @@
+ #
+ CONFIG_ZBOOT_ROM_TEXT=0x10000000
+ CONFIG_ZBOOT_ROM_BSS=0x20040000
+-CONFIG_ZBOOT_ROM=y
+-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
++# CONFIG_ZBOOT_ROM is not set
++CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
+
+ #
+ # Floating point emulation
+@@ -150,6 +251,7 @@
+ #
+ CONFIG_FPE_NWFPE=y
+ # CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
+
+ #
+ # Userspace binary formats
+@@ -165,6 +267,96 @@
+ # CONFIG_PM is not set
+
+ #
++# Networking
++#
++CONFIG_NET=y
+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
++#
++# Networking options
++#
++# CONFIG_NETDEBUG is not set
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
+
-+ chan = &dmac->channel[channel];
-+ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
-+ chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
-+ dmac_chan_readl_lo(dmac, channel, DAR),
-+ dmac_chan_readl_lo(dmac, channel, LLP),
-+ dmac_chan_readl_hi(dmac, channel, CTL),
-+ dmac_chan_readl_lo(dmac, channel, CTL));
++#
++# DCCP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_DCCP is not set
+
-+ if (chan->state == CH_STATE_BUSY) {
-+ clear_channel_bit(dmac, CH_EN, channel);
-+ cleanup_channel(dmac, &dmac->channel[channel]);
-+ }
++#
++# SCTP Configuration (EXPERIMENTAL)
++#
++CONFIG_IP_SCTP=m
++# CONFIG_SCTP_DBG_MSG is not set
++# CONFIG_SCTP_DBG_OBJCNT is not set
++# CONFIG_SCTP_HMAC_NONE is not set
++# CONFIG_SCTP_HMAC_SHA1 is not set
++CONFIG_SCTP_HMAC_MD5=y
+
-+ return 0;
-+}
++#
++# TIPC Configuration (EXPERIMENTAL)
++#
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
+
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
+
-+static void dmac_block_complete(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ unsigned long status, chanid;
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_IEEE80211 is not set
+
-+ status = dmac_readl_lo(dmac, STATUS_BLOCK);
++#
+ # Device Drivers
+ #
+
+@@ -173,15 +365,97 @@
+ #
+ CONFIG_STANDALONE=y
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-CONFIG_DEBUG_DRIVER=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
+
+ #
++# Connector - unified userspace <-> kernelspace linker
++#
++# CONFIG_CONNECTOR is not set
+
-+ while (status) {
-+ struct dma_request *req;
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
++#
+ # Memory Technology Devices (MTD)
+ #
+-# CONFIG_MTD is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
+
+ #
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
+
-+ if (chan->is_cyclic) {
-+ BUG_ON(!chan->req_cyclic
-+ || !chan->req_cyclic->req.block_complete);
-+ req = &chan->req_cyclic->req;
-+ } else {
-+ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
-+ req = &chan->req_sg->req;
-+ }
-+ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
-+ req->block_complete(req);
-+ status = dmac_readl_lo(dmac, STATUS_BLOCK);
-+ }
-+}
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
-+static void dmac_xfer_complete(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ struct dma_request *req;
-+ unsigned long status, chanid;
++#
++# Mapping drivers for chip access
++#
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++# CONFIG_MTD_PLATRAM is not set
+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
+
-+ while (status) {
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
+
-+ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
++#
++# NAND Flash Device Drivers
++#
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_SMC is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++CONFIG_MTD_NAND_AT91=y
++# CONFIG_MTD_NAND_NANDSIM is not set
+
-+ req = &chan->req_sg->req;
-+ BUG_ON(!req);
-+ cleanup_channel(dmac, chan);
-+ if (req->xfer_complete)
-+ req->xfer_complete(req);
++#
++# OneNAND Flash Device Drivers
++#
++# CONFIG_MTD_ONENAND is not set
+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
-+ }
-+}
++#
+ # Parallel port support
+ #
+ # CONFIG_PARPORT is not set
+@@ -189,6 +463,7 @@
+ #
+ # Plug and Play support
+ #
++# CONFIG_PNPACPI is not set
+
+ #
+ # Block devices
+@@ -196,28 +471,27 @@
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=y
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-CONFIG_BLK_DEV_NBD=y
++# CONFIG_BLK_DEV_NBD is not set
+ # CONFIG_BLK_DEV_UB is not set
+ CONFIG_BLK_DEV_RAM=y
+ CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=4096
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
++CONFIG_BLK_DEV_RAM_SIZE=16384
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
+
+ #
+-# IO Schedulers
++# ATA/ATAPI/MFM/RLL support
+ #
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_IDE is not set
+
+ #
+ # SCSI device support
+ #
++# CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
+ CONFIG_SCSI_PROC_FS=y
+
+ #
+@@ -233,24 +507,41 @@
+ #
+ # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+ #
+-# CONFIG_SCSI_MULTI_LUN is not set
+-# CONFIG_SCSI_CONSTANTS is not set
+-# CONFIG_SCSI_LOGGING is not set
++CONFIG_SCSI_MULTI_LUN=y
++CONFIG_SCSI_CONSTANTS=y
++CONFIG_SCSI_LOGGING=y
++# CONFIG_SCSI_SCAN_ASYNC is not set
+
+ #
+-# SCSI Transport Attributes
++# SCSI Transports
+ #
+-# CONFIG_SCSI_SPI_ATTRS is not set
++CONFIG_SCSI_SPI_ATTRS=m
+ # CONFIG_SCSI_FC_ATTRS is not set
+ # CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
+
+ #
+ # SCSI low-level drivers
+ #
+-# CONFIG_SCSI_SATA is not set
++# CONFIG_ISCSI_TCP is not set
+ # CONFIG_SCSI_DEBUG is not set
+
+ #
++# PCMCIA SCSI adapter support
++#
++# CONFIG_PCMCIA_AHA152X is not set
++# CONFIG_PCMCIA_FDOMAIN is not set
++# CONFIG_PCMCIA_NINJA_SCSI is not set
++# CONFIG_PCMCIA_QLOGIC is not set
++# CONFIG_PCMCIA_SYM53C500 is not set
+
-+static void dmac_error(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ unsigned long status, chanid;
++#
++# Serial ATA (prod) and Parallel ATA (experimental) drivers
++#
++# CONFIG_ATA is not set
+
-+ status = dmac_readl_lo(dmac, STATUS_ERROR);
++#
+ # Multi-device support (RAID and LVM)
+ #
+ # CONFIG_MD is not set
+@@ -269,61 +560,8 @@
+ #
+
+ #
+-# Networking support
++# Network device support
+ #
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-# CONFIG_IP_PNP_BOOTP is not set
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_IP_TCPDIAG is not set
+-# CONFIG_IP_TCPDIAG_IPV6 is not set
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_BIC=y
+-# CONFIG_IPV6 is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-
+-#
+-# QoS and/or fair queueing
+-#
+-# CONFIG_NET_SCHED is not set
+-# CONFIG_NET_CLS_ROUTE is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+ CONFIG_NETDEVICES=y
+ # CONFIG_DUMMY is not set
+ # CONFIG_BONDING is not set
+@@ -331,6 +569,11 @@
+ # CONFIG_TUN is not set
+
+ #
++# PHY device support
++#
++# CONFIG_PHYLIB is not set
+
-+ while (status) {
-+ struct dma_request *req;
++#
+ # Ethernet (10 or 100Mbit)
+ #
+ CONFIG_NET_ETHERNET=y
+@@ -357,11 +600,20 @@
+ # CONFIG_NET_RADIO is not set
+
+ #
++# PCMCIA network device support
++#
++# CONFIG_NET_PCMCIA is not set
+
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
++#
+ # Wan interfaces
+ #
+ # CONFIG_WAN is not set
+ # CONFIG_PPP is not set
+ # CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
+
+ #
+ # ISDN subsystem
+@@ -372,6 +624,7 @@
+ # Input device support
+ #
+ CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
+
+ #
+ # Userland interfaces
+@@ -397,9 +650,7 @@
+ #
+ # Hardware I/O ports
+ #
+-CONFIG_SERIO=y
+-# CONFIG_SERIO_SERPORT is not set
+-# CONFIG_SERIO_RAW is not set
++# CONFIG_SERIO is not set
+ # CONFIG_GAMEPORT is not set
+
+ #
+@@ -408,6 +659,7 @@
+ CONFIG_VT=y
+ CONFIG_VT_CONSOLE=y
+ CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
+ # CONFIG_SERIAL_NONSTANDARD is not set
+
+ #
+@@ -420,11 +672,11 @@
+ #
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
+ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_LEGACY_PTYS is not set
+
+ #
+ # IPMI
+@@ -435,21 +687,23 @@
+ # Watchdog Cards
+ #
+ # CONFIG_WATCHDOG is not set
++# CONFIG_HW_RANDOM is not set
+ # CONFIG_NVRAM is not set
+-# CONFIG_RTC is not set
+-# CONFIG_AT91RM9200_RTC is not set
+ # CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+
+ #
+-# Ftape, the floppy tape device driver
++# PCMCIA character devices
+ #
++# CONFIG_SYNCLINK_CS is not set
++# CONFIG_CARDMAN_4000 is not set
++# CONFIG_CARDMAN_4040 is not set
+ # CONFIG_RAW_DRIVER is not set
+
+ #
+ # TPM devices
+ #
+-# CONFIG_AT91_SPI is not set
++# CONFIG_TCG_TPM is not set
+
+ #
+ # I2C support
+@@ -457,10 +711,50 @@
+ # CONFIG_I2C is not set
+
+ #
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
+
-+ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
-+ clear_channel_bit(dmac, CH_EN, chanid);
++#
++# Dallas's 1-wire bus
++#
++# CONFIG_W1 is not set
+
-+ if (chan->is_cyclic) {
-+ BUG_ON(!chan->req_cyclic);
-+ req = &chan->req_cyclic->req;
-+ } else {
-+ BUG_ON(!chan->req_sg);
-+ req = &chan->req_sg->req;
-+ }
++#
++# Hardware Monitoring support
++#
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_ABITUGURU is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_VT1211 is not set
++CONFIG_HWMON_DEBUG_CHIP=y
+
-+ cleanup_channel(dmac, chan);
-+ if (req->error)
-+ req->error(req);
++#
+ # Misc devices
+ #
+
+ #
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
-+ }
-+}
++#
++# LED devices
++#
++# CONFIG_NEW_LEDS is not set
+
-+static irqreturn_t dmac_interrupt(int irq, void *dev_id)
-+{
-+ struct dw_dma_controller *dmac = dev_id;
-+ unsigned long status;
-+ int ret = IRQ_NONE;
++#
++# LED drivers
++#
+
-+ spin_lock(&dmac->lock);
++#
++# LED Triggers
++#
+
-+ status = dmac_readl_lo(dmac, STATUS_INT);
++#
+ # Multimedia devices
+ #
+ # CONFIG_VIDEO_DEV is not set
+@@ -469,100 +763,156 @@
+ # Digital Video Broadcasting Devices
+ #
+ # CONFIG_DVB is not set
++# CONFIG_USB_DABUSB is not set
+
+ #
+ # Graphics support
+ #
+-# CONFIG_FB is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_BACKLIGHT_CLASS_DEVICE=y
++# CONFIG_LCD_CLASS_DEVICE is not set
++CONFIG_BACKLIGHT_KB920x=y
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++CONFIG_FB_MODE_HELPERS=y
++CONFIG_FB_TILEBLITTING=y
+
+ #
++# Frame buffer hardware drivers
++#
++CONFIG_FB_S1D15605=y
++# CONFIG_FB_S1D13XXX is not set
++# CONFIG_FB_VIRTUAL is not set
+
-+ while (status) {
-+ ret = IRQ_HANDLED;
-+ if (status & 0x10)
-+ dmac_error(dmac);
-+ if (status & 0x02)
-+ dmac_block_complete(dmac);
-+ if (status & 0x01)
-+ dmac_xfer_complete(dmac);
++#
+ # Console display driver support
+ #
+ # CONFIG_VGA_CONSOLE is not set
+ CONFIG_DUMMY_CONSOLE=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
++CONFIG_FONTS=y
++# CONFIG_FONT_8x8 is not set
++# CONFIG_FONT_8x16 is not set
++# CONFIG_FONT_6x11 is not set
++# CONFIG_FONT_7x14 is not set
++# CONFIG_FONT_PEARL_8x8 is not set
++# CONFIG_FONT_ACORN_8x8 is not set
++CONFIG_FONT_MINI_4x6=y
++# CONFIG_FONT_SUN8x16 is not set
++# CONFIG_FONT_SUN12x22 is not set
++# CONFIG_FONT_10x18 is not set
+
+ #
++# Logo configuration
++#
++# CONFIG_LOGO is not set
+
-+ status = dmac_readl_lo(dmac, STATUS_INT);
-+ }
++#
+ # Sound
+ #
+ # CONFIG_SOUND is not set
+
+ #
++# HID Devices
++#
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
+
-+ spin_unlock(&dmac->lock);
-+ return ret;
-+}
++#
+ # USB support
+ #
+ CONFIG_USB_ARCH_HAS_HCD=y
+ CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
+ CONFIG_USB=y
+-CONFIG_USB_DEBUG=y
++# CONFIG_USB_DEBUG is not set
+
+ #
+ # Miscellaneous USB options
+ #
+ CONFIG_USB_DEVICEFS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
+
+ #
+ # USB Host Controller Drivers
+ #
+ # CONFIG_USB_ISP116X_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
+-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+ # CONFIG_USB_SL811_HCD is not set
+
+ #
+ # USB Device Class drivers
+ #
+-# CONFIG_USB_BLUETOOTH_TTY is not set
+ # CONFIG_USB_ACM is not set
+ # CONFIG_USB_PRINTER is not set
+
+ #
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+
-+static int __devinit dmac_probe(struct platform_device *pdev)
-+{
-+ struct dw_dma_controller *dmac;
-+ struct resource *regs;
-+ int ret;
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
+ CONFIG_USB_STORAGE=y
+-CONFIG_USB_STORAGE_DEBUG=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
+ # CONFIG_USB_STORAGE_FREECOM is not set
+ # CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++CONFIG_USB_LIBUSUAL=y
+
+ #
+ # USB Input Devices
+ #
+-# CONFIG_USB_HID is not set
+-
+-#
+-# USB HID Boot Protocol drivers
+-#
+-# CONFIG_USB_KBD is not set
+-# CONFIG_USB_MOUSE is not set
++CONFIG_USB_HID=y
++# CONFIG_USB_HIDINPUT_POWERBOOK is not set
++# CONFIG_HID_FF is not set
++# CONFIG_USB_HIDDEV is not set
+ # CONFIG_USB_AIPTEK is not set
+ # CONFIG_USB_WACOM is not set
+ # CONFIG_USB_ACECAD is not set
+ # CONFIG_USB_KBTAB is not set
+ # CONFIG_USB_POWERMATE is not set
+-# CONFIG_USB_MTOUCH is not set
+-# CONFIG_USB_ITMTOUCH is not set
+-# CONFIG_USB_EGALAX is not set
++# CONFIG_USB_TOUCHSCREEN is not set
++# CONFIG_USB_YEALINK is not set
+ # CONFIG_USB_XPAD is not set
+ # CONFIG_USB_ATI_REMOTE is not set
++# CONFIG_USB_ATI_REMOTE2 is not set
++# CONFIG_USB_KEYSPAN_REMOTE is not set
++# CONFIG_USB_APPLETOUCH is not set
++# CONFIG_USB_GTCO is not set
+
+ #
+ # USB Imaging devices
+ #
++# CONFIG_USB_MDC800 is not set
+ # CONFIG_USB_MICROTEK is not set
+
+ #
+-# USB Multimedia devices
+-#
+-# CONFIG_USB_DABUSB is not set
+-
+-#
+-# Video4Linux support is needed for USB Multimedia device support
+-#
+-
+-#
+ # USB Network Adapters
+ #
++# CONFIG_USB_CATC is not set
+ # CONFIG_USB_KAWETH is not set
+ # CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET_MII is not set
+ # CONFIG_USB_USBNET is not set
+ # CONFIG_USB_MON is not set
+
+@@ -580,12 +930,23 @@
+ #
+ # CONFIG_USB_EMI62 is not set
+ # CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
+ # CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
+ # CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
+ # CONFIG_USB_CYTHERM is not set
+-# CONFIG_USB_PHIDGETKIT is not set
+-# CONFIG_USB_PHIDGETSERVO is not set
++# CONFIG_USB_PHIDGET is not set
+ # CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
+
+ #
+ # USB DSL modem support
+@@ -599,36 +960,51 @@
+ #
+ # MMC/SD Card support
+ #
+-# CONFIG_MMC is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_AT91=y
+
+ #
++# Real Time Clock
++#
++CONFIG_RTC_LIB=y
++# CONFIG_RTC_CLASS is not set
+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
++#
+ # File systems
+ #
+ CONFIG_EXT2_FS=y
+ CONFIG_EXT2_FS_XATTR=y
+-# CONFIG_EXT2_FS_POSIX_ACL is not set
+-# CONFIG_EXT2_FS_SECURITY is not set
++CONFIG_EXT2_FS_POSIX_ACL=y
++CONFIG_EXT2_FS_SECURITY=y
+ # CONFIG_EXT2_FS_XIP is not set
+ CONFIG_EXT3_FS=y
+ CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
++CONFIG_EXT3_FS_POSIX_ACL=y
++CONFIG_EXT3_FS_SECURITY=y
++# CONFIG_EXT4DEV_FS is not set
+ CONFIG_JBD=y
+ # CONFIG_JBD_DEBUG is not set
+ CONFIG_FS_MBCACHE=y
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+-
+-#
+-# XFS support
+-#
++CONFIG_FS_POSIX_ACL=y
+ # CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_ROMFS_FS is not set
+-# CONFIG_QUOTA is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++CONFIG_QUOTA=y
++# CONFIG_QFMT_V1 is not set
++CONFIG_QFMT_V2=y
++CONFIG_QUOTACTL=y
+ CONFIG_DNOTIFY=y
+-CONFIG_AUTOFS_FS=y
++# CONFIG_AUTOFS_FS is not set
+ CONFIG_AUTOFS4_FS=y
++# CONFIG_FUSE_FS is not set
+
+ #
+ # CD-ROM/DVD Filesystems
+@@ -643,25 +1019,40 @@
+ CONFIG_MSDOS_FS=y
+ CONFIG_VFAT_FS=y
+ CONFIG_FAT_DEFAULT_CODEPAGE=437
+-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+ # CONFIG_NTFS_FS is not set
+
+ #
+ # Pseudo filesystems
+ #
+ CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
+ CONFIG_SYSFS=y
+-CONFIG_DEVPTS_FS_XATTR=y
+-# CONFIG_DEVPTS_FS_SECURITY is not set
+ CONFIG_TMPFS=y
+-# CONFIG_TMPFS_XATTR is not set
++# CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+ CONFIG_RAMFS=y
++CONFIG_CONFIGFS_FS=y
+
+ #
+ # Miscellaneous filesystems
+ #
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
+ # CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
+ # CONFIG_CRAMFS is not set
+ # CONFIG_VXFS_FS is not set
+ # CONFIG_HPFS_FS is not set
+@@ -675,16 +1066,23 @@
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
+ # CONFIG_NFSD is not set
+ CONFIG_ROOT_NFS=y
+ CONFIG_LOCKD=y
+ CONFIG_LOCKD_V4=y
+ CONFIG_NFS_COMMON=y
+ CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
+ # CONFIG_SMB_FS is not set
+ # CONFIG_CIFS is not set
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++# CONFIG_9P_FS is not set
+
+ #
+ # Partition Types
+@@ -734,26 +1132,51 @@
+ # CONFIG_NLS_ISO8859_15 is not set
+ # CONFIG_NLS_KOI8_R is not set
+ # CONFIG_NLS_KOI8_U is not set
+-# CONFIG_NLS_UTF8 is not set
++CONFIG_NLS_UTF8=y
+
+ #
++# Distributed Lock Manager
++#
++# CONFIG_DLM is not set
+
-+ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
-+ if (!dmac)
-+ return -ENOMEM;
-+ memset(dmac, 0, sizeof(*dmac));
++#
++# Profiling support
++#
++# CONFIG_PROFILING is not set
+
-+ dmac->hclk = clk_get(&pdev->dev, "hclk");
-+ if (IS_ERR(dmac->hclk)) {
-+ ret = PTR_ERR(dmac->hclk);
-+ goto out_free_dmac;
-+ }
-+ clk_enable(dmac->hclk);
++#
+ # Kernel hacking
+ #
+ # CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_LOG_BUF_SHIFT=17
++CONFIG_DETECT_SOFTLOCKUP=y
+ # CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
+ # CONFIG_DEBUG_SLAB is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++CONFIG_DEBUG_SPINLOCK=y
++# CONFIG_DEBUG_MUTEXES is not set
++CONFIG_DEBUG_SPINLOCK_SLEEP=y
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_FS is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
+ CONFIG_FRAME_POINTER=y
+-CONFIG_DEBUG_USER=y
+-CONFIG_DEBUG_ERRORS=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_DEBUG_USER is not set
++# CONFIG_DEBUG_ERRORS is not set
+ CONFIG_DEBUG_LL=y
+ # CONFIG_DEBUG_ICEDCC is not set
+
+@@ -766,7 +1189,43 @@
+ #
+ # Cryptographic options
+ #
+-# CONFIG_CRYPTO is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_HASH=m
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_HMAC=m
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
+
+ #
+ # Hardware crypto devices
+@@ -775,6 +1234,14 @@
+ #
+ # Library routines
+ #
++CONFIG_BITREVERSE=y
+ # CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
+ CONFIG_CRC32=y
+ # CONFIG_LIBCRC32C is not set
++CONFIG_AUDIT_GENERIC=y
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
+Index: linux-2.6.22.1/arch/arm/configs/at91sam9260ek_defconfig
+===================================================================
+--- linux-2.6.22.1/arch/arm/configs/at91sam9260ek_defconfig (revision 1)
++++ linux-2.6.22.1/arch/arm/configs/at91sam9260ek_defconfig (arbetskopia)
+@@ -1,18 +1,24 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.19-rc6
+-# Fri Nov 17 18:42:21 2006
++# Linux kernel version: 2.6.21
++# Mon May 7 11:42:02 2007
+ #
+ CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
+ # CONFIG_GENERIC_TIME is not set
+ CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
+ CONFIG_GENERIC_HARDIRQS=y
+ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
+ CONFIG_VECTORS_BASE=0xffff0000
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+@@ -31,13 +37,16 @@
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
+ # CONFIG_IPC_NS is not set
++CONFIG_SYSVIPC_SYSCTL=y
+ # CONFIG_POSIX_MQUEUE is not set
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+ # CONFIG_UTS_NS is not set
+ # CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
++CONFIG_SYSFS_DEPRECATED=y
+ # CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SYSCTL=y
+@@ -76,7 +85,9 @@
+ # Block layer
+ #
+ CONFIG_BLOCK=y
++# CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
+
+ #
+ # IO Schedulers
+@@ -110,10 +121,12 @@
+ # CONFIG_ARCH_IMX is not set
+ # CONFIG_ARCH_IOP32X is not set
+ # CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IOP13XX is not set
+ # CONFIG_ARCH_IXP4XX is not set
+ # CONFIG_ARCH_IXP2000 is not set
+ # CONFIG_ARCH_IXP23XX is not set
+ # CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_NS9XXX is not set
+ # CONFIG_ARCH_PNX4008 is not set
+ # CONFIG_ARCH_PXA is not set
+ # CONFIG_ARCH_RPC is not set
+@@ -129,21 +142,29 @@
+ # CONFIG_ARCH_AT91RM9200 is not set
+ CONFIG_ARCH_AT91SAM9260=y
+ # CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
+
+ #
+-# AT91SAM9260 Board Type
++# AT91SAM9260 Variants
+ #
++# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
-+ ret = -ENOMEM;
-+ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
-+ sizeof(struct dw_dma_lli), 4, 0);
-+ if (!dmac->lli_pool)
-+ goto out_disable_clk;
++#
++# AT91SAM9260 / AT91SAM9XE Board Type
++#
+ CONFIG_MACH_AT91SAM9260EK=y
+
+ #
+ # AT91 Board Options
+ #
++# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+ # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+ #
+ # AT91 Feature Selections
+ #
+ # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++# CONFIG_ATMEL_TCLIB is not set
+
+ #
+ # Processor Type
+@@ -166,6 +187,7 @@
+ # CONFIG_CPU_DCACHE_DISABLE is not set
+ # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+ # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++# CONFIG_OUTER_CACHE is not set
+
+ #
+ # Bus support
+@@ -193,6 +215,7 @@
+ # CONFIG_SPARSEMEM_STATIC is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4096
+ # CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
+ # CONFIG_LEDS is not set
+ CONFIG_ALIGNMENT_TRAP=y
+
+@@ -203,6 +226,7 @@
+ CONFIG_ZBOOT_ROM_BSS=0x0
+ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+ # CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
+
+ #
+ # Floating point emulation
+@@ -228,7 +252,6 @@
+ # Power management options
+ #
+ # CONFIG_PM is not set
+-# CONFIG_APM is not set
+
+ #
+ # Networking
+@@ -242,9 +265,6 @@
+ CONFIG_PACKET=y
+ # CONFIG_PACKET_MMAP is not set
+ CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+ # CONFIG_NET_KEY is not set
+ CONFIG_INET=y
+ # CONFIG_IP_MULTICAST is not set
+@@ -263,14 +283,15 @@
+ # CONFIG_INET_IPCOMP is not set
+ # CONFIG_INET_XFRM_TUNNEL is not set
+ # CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
+ CONFIG_INET_DIAG=y
+ CONFIG_INET_TCP_DIAG=y
+ # CONFIG_TCP_CONG_ADVANCED is not set
+ CONFIG_TCP_CONG_CUBIC=y
+ CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
+ # CONFIG_IPV6 is not set
+ # CONFIG_INET6_XFRM_TUNNEL is not set
+ # CONFIG_INET6_TUNNEL is not set
+@@ -328,6 +349,7 @@
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+
+ #
+@@ -348,6 +370,7 @@
+ #
+ # Plug and Play support
+ #
++# CONFIG_PNPACPI is not set
+
+ #
+ # Block devices
+@@ -360,7 +383,6 @@
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=8192
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+-CONFIG_BLK_DEV_INITRD=y
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+
+@@ -369,6 +391,7 @@
+ #
+ # CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++# CONFIG_SCSI_TGT is not set
+ # CONFIG_SCSI_NETLINK is not set
+ CONFIG_SCSI_PROC_FS=y
+
+@@ -388,6 +411,7 @@
+ CONFIG_SCSI_MULTI_LUN=y
+ # CONFIG_SCSI_CONSTANTS is not set
+ # CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
+
+ #
+ # SCSI Transports
+@@ -405,6 +429,11 @@
+ # CONFIG_SCSI_DEBUG is not set
+
+ #
++# Serial ATA (prod) and Parallel ATA (experimental) drivers
++#
++# CONFIG_ATA is not set
+
-+ spin_lock_init(&dmac->lock);
-+ dmac->dma.dev = &pdev->dev;
-+ dmac->dma.alloc_channel = dmac_alloc_channel;
-+ dmac->dma.release_channel = dmac_release_channel;
-+ dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
-+ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
-+ dmac->dma.start_request = dmac_start_request;
-+ dmac->dma.stop_request = dmac_stop_request;
-+ dmac->dma.get_current_pos = dmac_get_current_pos;
++#
+ # Multi-device support (RAID and LVM)
+ #
+ # CONFIG_MD is not set
+@@ -425,7 +454,51 @@
+ #
+ # Network device support
+ #
+-# CONFIG_NETDEVICES is not set
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
+
-+ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!dmac->regs)
-+ goto out_free_pool;
++#
++# PHY device support
++#
++# CONFIG_PHYLIB is not set
+
-+ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
-+ IRQF_SAMPLE_RANDOM, pdev->name, dmac);
-+ if (ret)
-+ goto out_unmap_regs;
++#
++# Ethernet (10 or 100Mbit)
++#
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++CONFIG_MACB=y
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
+
-+ /* Enable the DMA controller */
-+ dmac_writel_lo(dmac, CFG, 1);
++#
++# Ethernet (1000 Mbit)
++#
+
-+ register_dma_controller(&dmac->dma);
++#
++# Ethernet (10000 Mbit)
++#
+
-+ printk(KERN_INFO
-+ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
-+ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
++#
++# Token Ring devices
++#
+
-+ return 0;
++#
++# Wireless LAN (non-hamradio)
++#
++# CONFIG_NET_RADIO is not set
+
-+out_unmap_regs:
-+ iounmap(dmac->regs);
-+out_free_pool:
-+ dma_pool_destroy(dmac->lli_pool);
-+out_disable_clk:
-+ clk_disable(dmac->hclk);
-+ clk_put(dmac->hclk);
-+out_free_dmac:
-+ kfree(dmac);
-+ return ret;
-+}
++#
++# Wan interfaces
++#
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+
+@@ -517,10 +590,6 @@
+ # CONFIG_NVRAM is not set
+ # CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+-
+-#
+-# Ftape, the floppy tape device driver
+-#
+ # CONFIG_RAW_DRIVER is not set
+
+ #
+@@ -553,9 +622,13 @@
+ #
+ # Misc devices
+ #
+-# CONFIG_TIFM_CORE is not set
+
+ #
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
+
-+static struct platform_driver dmac_driver = {
-+ .probe = dmac_probe,
-+ .driver = {
-+ .name = "dmaca",
-+ },
-+};
++#
+ # LED devices
+ #
+ # CONFIG_NEW_LEDS is not set
+@@ -582,7 +655,7 @@
+ #
+ # Graphics support
+ #
+-# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+ # CONFIG_FB is not set
+
+ #
+@@ -590,7 +663,6 @@
+ #
+ # CONFIG_VGA_CONSOLE is not set
+ CONFIG_DUMMY_CONSOLE=y
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+ #
+ # Sound
+@@ -598,6 +670,12 @@
+ # CONFIG_SOUND is not set
+
+ #
++# HID Devices
++#
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
+
-+static int __init dmac_init(void)
-+{
-+ return platform_driver_register(&dmac_driver);
-+}
-+subsys_initcall(dmac_init);
++#
+ # USB support
+ #
+ CONFIG_USB_ARCH_HAS_HCD=y
+@@ -610,7 +688,6 @@
+ # Miscellaneous USB options
+ #
+ CONFIG_USB_DEVICEFS=y
+-# CONFIG_USB_BANDWIDTH is not set
+ # CONFIG_USB_DYNAMIC_MINORS is not set
+ # CONFIG_USB_OTG is not set
+
+@@ -619,7 +696,8 @@
+ #
+ # CONFIG_USB_ISP116X_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
+-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+ # CONFIG_USB_SL811_HCD is not set
+
+@@ -671,6 +749,7 @@
+ # CONFIG_USB_ATI_REMOTE2 is not set
+ # CONFIG_USB_KEYSPAN_REMOTE is not set
+ # CONFIG_USB_APPLETOUCH is not set
++# CONFIG_USB_GTCO is not set
+
+ #
+ # USB Imaging devices
+@@ -708,6 +787,7 @@
+ # CONFIG_USB_RIO500 is not set
+ # CONFIG_USB_LEGOTOWER is not set
+ # CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
+ # CONFIG_USB_LED is not set
+ # CONFIG_USB_CYPRESS_CY7C63 is not set
+ # CONFIG_USB_CYTHERM is not set
+@@ -717,6 +797,7 @@
+ # CONFIG_USB_APPLEDISPLAY is not set
+ # CONFIG_USB_LD is not set
+ # CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
+ # CONFIG_USB_TEST is not set
+
+ #
+@@ -889,6 +970,11 @@
+ # CONFIG_NLS_UTF8 is not set
+
+ #
++# Distributed Lock Manager
++#
++# CONFIG_DLM is not set
+
-+static void __exit dmac_exit(void)
-+{
-+ platform_driver_unregister(&dmac_driver);
-+}
-+module_exit(dmac_exit);
++#
+ # Profiling support
+ #
+ # CONFIG_PROFILING is not set
+@@ -900,28 +986,30 @@
+ CONFIG_ENABLE_MUST_CHECK=y
+ # CONFIG_MAGIC_SYSRQ is not set
+ # CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_LOG_BUF_SHIFT=14
+ CONFIG_DETECT_SOFTLOCKUP=y
+ # CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
+ # CONFIG_DEBUG_SLAB is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+ # CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_RWSEMS is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_FS is not set
+ # CONFIG_DEBUG_VM is not set
+ # CONFIG_DEBUG_LIST is not set
+ CONFIG_FRAME_POINTER=y
+ CONFIG_FORCED_INLINING=y
+-# CONFIG_HEADERS_CHECK is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
+ CONFIG_DEBUG_USER=y
+ # CONFIG_DEBUG_ERRORS is not set
+ CONFIG_DEBUG_LL=y
+@@ -941,9 +1029,12 @@
+ #
+ # Library routines
+ #
++CONFIG_BITREVERSE=y
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
+ CONFIG_CRC32=y
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
+Index: linux-2.6.22.1/arch/arm/configs/at91sam9261ek_defconfig
+===================================================================
+--- linux-2.6.22.1/arch/arm/configs/at91sam9261ek_defconfig (revision 1)
++++ linux-2.6.22.1/arch/arm/configs/at91sam9261ek_defconfig (arbetskopia)
+@@ -1,18 +1,24 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.19-rc6
+-# Fri Nov 17 18:00:38 2006
++# Linux kernel version: 2.6.21
++# Mon May 7 11:42:30 2007
+ #
+ CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
+ # CONFIG_GENERIC_TIME is not set
+ CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
+ CONFIG_GENERIC_HARDIRQS=y
+ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
+ CONFIG_VECTORS_BASE=0xffff0000
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+@@ -31,13 +37,16 @@
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
+ # CONFIG_IPC_NS is not set
++CONFIG_SYSVIPC_SYSCTL=y
+ # CONFIG_POSIX_MQUEUE is not set
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+ # CONFIG_UTS_NS is not set
+ # CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
++CONFIG_SYSFS_DEPRECATED=y
+ # CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SYSCTL=y
+@@ -76,7 +85,9 @@
+ # Block layer
+ #
+ CONFIG_BLOCK=y
++# CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
+
+ #
+ # IO Schedulers
+@@ -110,10 +121,12 @@
+ # CONFIG_ARCH_IMX is not set
+ # CONFIG_ARCH_IOP32X is not set
+ # CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IOP13XX is not set
+ # CONFIG_ARCH_IXP4XX is not set
+ # CONFIG_ARCH_IXP2000 is not set
+ # CONFIG_ARCH_IXP23XX is not set
+ # CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_NS9XXX is not set
+ # CONFIG_ARCH_PNX4008 is not set
+ # CONFIG_ARCH_PXA is not set
+ # CONFIG_ARCH_RPC is not set
+@@ -129,6 +142,7 @@
+ # CONFIG_ARCH_AT91RM9200 is not set
+ # CONFIG_ARCH_AT91SAM9260 is not set
+ CONFIG_ARCH_AT91SAM9261=y
++# CONFIG_ARCH_AT91SAM9263 is not set
+
+ #
+ # AT91SAM9261 Board Type
+@@ -138,12 +152,14 @@
+ #
+ # AT91 Board Options
+ #
++# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+ # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+ #
+ # AT91 Feature Selections
+ #
+ # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++# CONFIG_ATMEL_TCLIB is not set
+
+ #
+ # Processor Type
+@@ -166,6 +182,7 @@
+ # CONFIG_CPU_DCACHE_DISABLE is not set
+ # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+ # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++# CONFIG_OUTER_CACHE is not set
+
+ #
+ # Bus support
+@@ -193,6 +210,7 @@
+ # CONFIG_SPARSEMEM_STATIC is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4096
+ # CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
+ # CONFIG_LEDS is not set
+ CONFIG_ALIGNMENT_TRAP=y
+
+@@ -203,6 +221,7 @@
+ CONFIG_ZBOOT_ROM_BSS=0x0
+ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+ # CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
+
+ #
+ # Floating point emulation
+@@ -228,7 +247,6 @@
+ # Power management options
+ #
+ # CONFIG_PM is not set
+-# CONFIG_APM is not set
+
+ #
+ # Networking
+@@ -245,6 +263,7 @@
+ CONFIG_XFRM=y
+ # CONFIG_XFRM_USER is not set
+ # CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
+ # CONFIG_NET_KEY is not set
+ CONFIG_INET=y
+ # CONFIG_IP_MULTICAST is not set
+@@ -271,6 +290,7 @@
+ # CONFIG_TCP_CONG_ADVANCED is not set
+ CONFIG_TCP_CONG_CUBIC=y
+ CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
+ # CONFIG_IPV6 is not set
+ # CONFIG_INET6_XFRM_TUNNEL is not set
+ # CONFIG_INET6_TUNNEL is not set
+@@ -328,6 +348,7 @@
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+
+ #
+@@ -350,6 +371,7 @@
+ # User Modules And Translation Layers
+ #
+ # CONFIG_MTD_CHAR is not set
++CONFIG_MTD_BLKDEVS=y
+ CONFIG_MTD_BLOCK=y
+ # CONFIG_FTL is not set
+ # CONFIG_NFTL is not set
+@@ -386,6 +408,8 @@
+ #
+ # Self-contained MTD device drivers
+ #
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
+ # CONFIG_MTD_SLRAM is not set
+ # CONFIG_MTD_PHRAM is not set
+ # CONFIG_MTD_MTDRAM is not set
+@@ -422,6 +446,7 @@
+ #
+ # Plug and Play support
+ #
++# CONFIG_PNPACPI is not set
+
+ #
+ # Block devices
+@@ -434,7 +459,6 @@
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=8192
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+-CONFIG_BLK_DEV_INITRD=y
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+
+@@ -443,6 +467,7 @@
+ #
+ # CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++# CONFIG_SCSI_TGT is not set
+ # CONFIG_SCSI_NETLINK is not set
+ CONFIG_SCSI_PROC_FS=y
+
+@@ -462,6 +487,7 @@
+ CONFIG_SCSI_MULTI_LUN=y
+ # CONFIG_SCSI_CONSTANTS is not set
+ # CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
+
+ #
+ # SCSI Transports
+@@ -479,6 +505,11 @@
+ # CONFIG_SCSI_DEBUG is not set
+
+ #
++# Serial ATA (prod) and Parallel ATA (experimental) drivers
++#
++# CONFIG_ATA is not set
+
-+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_LICENSE("GPL");
-diff --git a/arch/avr32/drivers/dw-dmac.h b/arch/avr32/drivers/dw-dmac.h
-new file mode 100644
-index 0000000..1f67921
---- /dev/null
-+++ b/arch/avr32/drivers/dw-dmac.h
-@@ -0,0 +1,42 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __AVR32_DW_DMAC_H__
-+#define __AVR32_DW_DMAC_H__
++#
+ # Multi-device support (RAID and LVM)
+ #
+ # CONFIG_MD is not set
+@@ -575,7 +606,16 @@
+ # CONFIG_INPUT_KEYBOARD is not set
+ # CONFIG_INPUT_MOUSE is not set
+ # CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_ADS7846=y
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++# CONFIG_TOUCHSCREEN_UCB1400 is not set
+ # CONFIG_INPUT_MISC is not set
+
+ #
+@@ -634,10 +674,6 @@
+ # CONFIG_NVRAM is not set
+ # CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+-
+-#
+-# Ftape, the floppy tape device driver
+-#
+ # CONFIG_RAW_DRIVER is not set
+
+ #
+@@ -662,6 +698,7 @@
+ # I2C Hardware Bus support
+ #
+ CONFIG_I2C_AT91=y
++CONFIG_I2C_AT91_CLOCKRATE=100000
+ # CONFIG_I2C_OCORES is not set
+ # CONFIG_I2C_PARPORT_LIGHT is not set
+ # CONFIG_I2C_STUB is not set
+@@ -686,10 +723,22 @@
+ #
+ # SPI support
+ #
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
+
+ #
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
+
-+#define DW_DMAC_CFG 0x398
-+#define DW_DMAC_CH_EN 0x3a0
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
+
-+#define DW_DMAC_STATUS_XFER 0x2e8
-+#define DW_DMAC_STATUS_BLOCK 0x2f0
-+#define DW_DMAC_STATUS_ERROR 0x308
++#
+ # Dallas's 1-wire bus
+ #
+ # CONFIG_W1 is not set
+@@ -703,9 +752,13 @@
+ #
+ # Misc devices
+ #
+-# CONFIG_TIFM_CORE is not set
+
+ #
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
+
-+#define DW_DMAC_MASK_XFER 0x310
-+#define DW_DMAC_MASK_BLOCK 0x318
-+#define DW_DMAC_MASK_ERROR 0x330
++#
+ # LED devices
+ #
+ # CONFIG_NEW_LEDS is not set
+@@ -732,7 +785,7 @@
+ #
+ # Graphics support
+ #
+-# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+ # CONFIG_FB is not set
+
+ #
+@@ -740,7 +793,6 @@
+ #
+ # CONFIG_VGA_CONSOLE is not set
+ CONFIG_DUMMY_CONSOLE=y
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+ #
+ # Sound
+@@ -748,6 +800,12 @@
+ # CONFIG_SOUND is not set
+
+ #
++# HID Devices
++#
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
+
-+#define DW_DMAC_CLEAR_XFER 0x338
-+#define DW_DMAC_CLEAR_BLOCK 0x340
-+#define DW_DMAC_CLEAR_ERROR 0x358
++#
+ # USB support
+ #
+ CONFIG_USB_ARCH_HAS_HCD=y
+@@ -760,7 +818,6 @@
+ # Miscellaneous USB options
+ #
+ CONFIG_USB_DEVICEFS=y
+-# CONFIG_USB_BANDWIDTH is not set
+ # CONFIG_USB_DYNAMIC_MINORS is not set
+ # CONFIG_USB_OTG is not set
+
+@@ -769,7 +826,8 @@
+ #
+ # CONFIG_USB_ISP116X_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
+-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+ # CONFIG_USB_SL811_HCD is not set
+
+@@ -821,6 +879,7 @@
+ # CONFIG_USB_ATI_REMOTE2 is not set
+ # CONFIG_USB_KEYSPAN_REMOTE is not set
+ # CONFIG_USB_APPLETOUCH is not set
++# CONFIG_USB_GTCO is not set
+
+ #
+ # USB Imaging devices
+@@ -858,6 +917,7 @@
+ # CONFIG_USB_RIO500 is not set
+ # CONFIG_USB_LEGOTOWER is not set
+ # CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
+ # CONFIG_USB_LED is not set
+ # CONFIG_USB_CYPRESS_CY7C63 is not set
+ # CONFIG_USB_CYTHERM is not set
+@@ -867,6 +927,7 @@
+ # CONFIG_USB_APPLEDISPLAY is not set
+ # CONFIG_USB_LD is not set
+ # CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
+ # CONFIG_USB_TEST is not set
+
+ #
+@@ -903,7 +964,6 @@
+ # CONFIG_MMC_DEBUG is not set
+ CONFIG_MMC_BLOCK=y
+ CONFIG_MMC_AT91=m
+-# CONFIG_MMC_TIFM_SD is not set
+
+ #
+ # Real Time Clock
+@@ -973,7 +1033,6 @@
+ # CONFIG_BEFS_FS is not set
+ # CONFIG_BFS_FS is not set
+ # CONFIG_EFS_FS is not set
+-# CONFIG_JFFS_FS is not set
+ # CONFIG_JFFS2_FS is not set
+ CONFIG_CRAMFS=y
+ # CONFIG_VXFS_FS is not set
+@@ -1045,6 +1104,11 @@
+ # CONFIG_NLS_UTF8 is not set
+
+ #
++# Distributed Lock Manager
++#
++# CONFIG_DLM is not set
+
-+#define DW_DMAC_STATUS_INT 0x360
++#
+ # Profiling support
+ #
+ # CONFIG_PROFILING is not set
+@@ -1056,28 +1120,30 @@
+ CONFIG_ENABLE_MUST_CHECK=y
+ # CONFIG_MAGIC_SYSRQ is not set
+ # CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_LOG_BUF_SHIFT=14
+ CONFIG_DETECT_SOFTLOCKUP=y
+ # CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
+ # CONFIG_DEBUG_SLAB is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+ # CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_RWSEMS is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_FS is not set
+ # CONFIG_DEBUG_VM is not set
+ # CONFIG_DEBUG_LIST is not set
+ CONFIG_FRAME_POINTER=y
+ CONFIG_FORCED_INLINING=y
+-# CONFIG_HEADERS_CHECK is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
+ CONFIG_DEBUG_USER=y
+ # CONFIG_DEBUG_ERRORS is not set
+ CONFIG_DEBUG_LL=y
+@@ -1097,9 +1163,12 @@
+ #
+ # Library routines
+ #
++CONFIG_BITREVERSE=y
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
+ CONFIG_CRC32=y
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
+Index: linux-2.6.22.1/arch/arm/configs/at91sam9263ek_defconfig
+===================================================================
+--- linux-2.6.22.1/arch/arm/configs/at91sam9263ek_defconfig (revision 1)
++++ linux-2.6.22.1/arch/arm/configs/at91sam9263ek_defconfig (arbetskopia)
+@@ -1,11 +1,14 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.20-rc1
+-# Mon Jan 8 16:06:54 2007
++# Linux kernel version: 2.6.21
++# Mon May 7 11:42:49 2007
+ #
+ CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
+ # CONFIG_GENERIC_TIME is not set
+ CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
+ CONFIG_GENERIC_HARDIRQS=y
+ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+@@ -15,6 +18,7 @@
+ # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
+ CONFIG_VECTORS_BASE=0xffff0000
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+@@ -33,6 +37,7 @@
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
+ # CONFIG_IPC_NS is not set
++CONFIG_SYSVIPC_SYSCTL=y
+ # CONFIG_POSIX_MQUEUE is not set
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+@@ -41,6 +46,7 @@
+ # CONFIG_IKCONFIG is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ # CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SYSCTL=y
+@@ -120,6 +126,7 @@
+ # CONFIG_ARCH_IXP2000 is not set
+ # CONFIG_ARCH_IXP23XX is not set
+ # CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_NS9XXX is not set
+ # CONFIG_ARCH_PNX4008 is not set
+ # CONFIG_ARCH_PXA is not set
+ # CONFIG_ARCH_RPC is not set
+@@ -152,6 +159,7 @@
+ # AT91 Feature Selections
+ #
+ # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++# CONFIG_ATMEL_TCLIB is not set
+
+ #
+ # Processor Type
+@@ -174,6 +182,7 @@
+ # CONFIG_CPU_DCACHE_DISABLE is not set
+ # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+ # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++# CONFIG_OUTER_CACHE is not set
+
+ #
+ # Bus support
+@@ -201,6 +210,7 @@
+ # CONFIG_SPARSEMEM_STATIC is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4096
+ # CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
+ # CONFIG_LEDS is not set
+ CONFIG_ALIGNMENT_TRAP=y
+
+@@ -211,6 +221,7 @@
+ CONFIG_ZBOOT_ROM_BSS=0x0
+ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+ # CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
+
+ #
+ # Floating point emulation
+@@ -236,7 +247,6 @@
+ # Power management options
+ #
+ # CONFIG_PM is not set
+-# CONFIG_APM is not set
+
+ #
+ # Networking
+@@ -333,6 +343,7 @@
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+
+ #
+@@ -430,6 +441,7 @@
+ #
+ # Plug and Play support
+ #
++# CONFIG_PNPACPI is not set
+
+ #
+ # Block devices
+@@ -443,7 +455,6 @@
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=8192
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+-CONFIG_BLK_DEV_INITRD=y
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+
+@@ -531,6 +542,7 @@
+ #
+ CONFIG_NET_ETHERNET=y
+ CONFIG_MII=y
++CONFIG_MACB=y
+ # CONFIG_SMC91X is not set
+ # CONFIG_DM9000 is not set
+
+@@ -685,6 +697,7 @@
+ # I2C Hardware Bus support
+ #
+ CONFIG_I2C_AT91=y
++CONFIG_I2C_AT91_CLOCKRATE=100000
+ # CONFIG_I2C_OCORES is not set
+ # CONFIG_I2C_PARPORT_LIGHT is not set
+ # CONFIG_I2C_STUB is not set
+@@ -722,6 +735,7 @@
+ #
+ # SPI Protocol Masters
+ #
++# CONFIG_SPI_AT25 is not set
+
+ #
+ # Dallas's 1-wire bus
+@@ -737,9 +751,13 @@
+ #
+ # Misc devices
+ #
+-# CONFIG_TIFM_CORE is not set
+
+ #
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
+
-+#define DW_DMAC_CHAN_SAR 0x000
-+#define DW_DMAC_CHAN_DAR 0x008
-+#define DW_DMAC_CHAN_LLP 0x010
-+#define DW_DMAC_CHAN_CTL 0x018
-+#define DW_DMAC_CHAN_SSTAT 0x020
-+#define DW_DMAC_CHAN_DSTAT 0x028
-+#define DW_DMAC_CHAN_SSTATAR 0x030
-+#define DW_DMAC_CHAN_DSTATAR 0x038
-+#define DW_DMAC_CHAN_CFG 0x040
-+#define DW_DMAC_CHAN_SGR 0x048
-+#define DW_DMAC_CHAN_DSR 0x050
++#
+ # LED devices
+ #
+ # CONFIG_NEW_LEDS is not set
+@@ -766,15 +784,23 @@
+ #
+ # Graphics support
+ #
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++CONFIG_FB=y
+ # CONFIG_FIRMWARE_EDID is not set
+-CONFIG_FB=y
++# CONFIG_FB_DDC is not set
+ # CONFIG_FB_CFB_FILLRECT is not set
+ # CONFIG_FB_CFB_COPYAREA is not set
+ # CONFIG_FB_CFB_IMAGEBLIT is not set
++# CONFIG_FB_SVGALIB is not set
+ # CONFIG_FB_MACMODES is not set
+ # CONFIG_FB_BACKLIGHT is not set
+ # CONFIG_FB_MODE_HELPERS is not set
+ # CONFIG_FB_TILEBLITTING is not set
+
-+#endif /* __AVR32_DW_DMAC_H__ */
-diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile
-index 90e5aff..b6afc0c 100644
---- a/arch/avr32/kernel/Makefile
-+++ b/arch/avr32/kernel/Makefile
-@@ -9,6 +9,7 @@ obj-y += syscall_table.o syscall-stubs.o irq.o
- obj-y += setup.o traps.o semaphore.o ptrace.o
- obj-y += signal.o sys_avr32.o process.o time.o
- obj-y += init_task.o switch_to.o cpu.o
-+obj-y += dma-controller.o
- obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
- obj-$(CONFIG_KPROBES) += kprobes.o
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D15605 is not set
+ # CONFIG_FB_S1D13XXX is not set
+ # CONFIG_FB_VIRTUAL is not set
+
+@@ -789,7 +815,6 @@
+ # Logo configuration
+ #
+ # CONFIG_LOGO is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+ #
+ # Sound
+@@ -800,6 +825,7 @@
+ # HID Devices
+ #
+ CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
+
+ #
+ # USB support
+@@ -814,9 +840,7 @@
+ # Miscellaneous USB options
+ #
+ CONFIG_USB_DEVICEFS=y
+-# CONFIG_USB_BANDWIDTH is not set
+ # CONFIG_USB_DYNAMIC_MINORS is not set
+-# CONFIG_USB_MULTITHREAD_PROBE is not set
+ # CONFIG_USB_OTG is not set
+
+ #
+@@ -824,7 +848,8 @@
+ #
+ # CONFIG_USB_ISP116X_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
+-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+ # CONFIG_USB_SL811_HCD is not set
+
+@@ -877,6 +902,7 @@
+ # CONFIG_USB_ATI_REMOTE2 is not set
+ # CONFIG_USB_KEYSPAN_REMOTE is not set
+ # CONFIG_USB_APPLETOUCH is not set
++# CONFIG_USB_GTCO is not set
-diff --git a/arch/avr32/kernel/dma-controller.c b/arch/avr32/kernel/dma-controller.c
-new file mode 100644
-index 0000000..fb654b3
---- /dev/null
-+++ b/arch/avr32/kernel/dma-controller.c
+ #
+ # USB Imaging devices
+@@ -914,6 +940,7 @@
+ # CONFIG_USB_RIO500 is not set
+ # CONFIG_USB_LEGOTOWER is not set
+ # CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
+ # CONFIG_USB_LED is not set
+ # CONFIG_USB_CYPRESS_CY7C63 is not set
+ # CONFIG_USB_CYTHERM is not set
+@@ -923,6 +950,7 @@
+ # CONFIG_USB_APPLEDISPLAY is not set
+ # CONFIG_USB_LD is not set
+ # CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
+ # CONFIG_USB_TEST is not set
+
+ #
+@@ -959,7 +987,6 @@
+ # CONFIG_MMC_DEBUG is not set
+ CONFIG_MMC_BLOCK=y
+ CONFIG_MMC_AT91=m
+-# CONFIG_MMC_TIFM_SD is not set
+
+ #
+ # Real Time Clock
+@@ -1136,15 +1163,16 @@
+ # CONFIG_DEBUG_FS is not set
+ # CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_LOG_BUF_SHIFT=14
+ CONFIG_DETECT_SOFTLOCKUP=y
+ # CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
+ # CONFIG_DEBUG_SLAB is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+ # CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_RWSEMS is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+@@ -1155,6 +1183,7 @@
+ CONFIG_FRAME_POINTER=y
+ CONFIG_FORCED_INLINING=y
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
+ CONFIG_DEBUG_USER=y
+ # CONFIG_DEBUG_ERRORS is not set
+ CONFIG_DEBUG_LL=y
+@@ -1180,5 +1209,7 @@
+ CONFIG_CRC32=y
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
+ CONFIG_PLIST=y
+-CONFIG_IOMAP_COPY=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
+Index: linux-2.6.22.1/arch/avr32/kernel/setup.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/kernel/setup.c (revision 1)
++++ linux-2.6.22.1/arch/avr32/kernel/setup.c (arbetskopia)
+@@ -313,7 +313,7 @@
+
+ static int __init parse_tag_rdimg(struct tag *tag)
+ {
+-#ifdef CONFIG_INITRD
++#ifdef CONFIG_BLK_DEV_INITRD
+ struct tag_mem_range *mem = &tag->u.mem_range;
+ int ret;
+
+@@ -323,7 +323,7 @@
+ return 0;
+ }
+
+- ret = add_reserved_region(mem->start, mem->start + mem->size - 1,
++ ret = add_reserved_region(mem->addr, mem->addr + mem->size - 1,
+ "initrd");
+ if (ret) {
+ printk(KERN_WARNING
+Index: linux-2.6.22.1/arch/avr32/kernel/dma-controller.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/kernel/dma-controller.c (revision 0)
++++ linux-2.6.22.1/arch/avr32/kernel/dma-controller.c (revision 0)
@@ -0,0 +1,34 @@
+/*
+ * Preliminary DMA controller framework for AVR32
@@ -2309,33 +8633,23 @@ index 0000000..fb654b3
+ return NULL;
+}
+EXPORT_SYMBOL(find_dma_controller);
-diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
-index b279d66..d08b0bc 100644
---- a/arch/avr32/kernel/setup.c
-+++ b/arch/avr32/kernel/setup.c
-@@ -313,7 +313,7 @@ __tagtable(ATAG_MEM, parse_tag_mem);
-
- static int __init parse_tag_rdimg(struct tag *tag)
- {
--#ifdef CONFIG_INITRD
-+#ifdef CONFIG_BLK_DEV_INITRD
- struct tag_mem_range *mem = &tag->u.mem_range;
- int ret;
-
-@@ -323,7 +323,7 @@ static int __init parse_tag_rdimg(struct tag *tag)
- return 0;
- }
+Index: linux-2.6.22.1/arch/avr32/kernel/Makefile
+===================================================================
+--- linux-2.6.22.1/arch/avr32/kernel/Makefile (revision 1)
++++ linux-2.6.22.1/arch/avr32/kernel/Makefile (arbetskopia)
+@@ -9,6 +9,7 @@
+ obj-y += setup.o traps.o semaphore.o ptrace.o
+ obj-y += signal.o sys_avr32.o process.o time.o
+ obj-y += init_task.o switch_to.o cpu.o
++obj-y += dma-controller.o
+ obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
+ obj-$(CONFIG_KPROBES) += kprobes.o
-- ret = add_reserved_region(mem->start, mem->start + mem->size - 1,
-+ ret = add_reserved_region(mem->addr, mem->addr + mem->size - 1,
- "initrd");
- if (ret) {
- printk(KERN_WARNING
-diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig
-index eb30783..43c5b9f 100644
---- a/arch/avr32/mach-at32ap/Kconfig
-+++ b/arch/avr32/mach-at32ap/Kconfig
-@@ -26,6 +26,13 @@ config AP7000_8_BIT_SMC
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/Kconfig
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/Kconfig (revision 1)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/Kconfig (arbetskopia)
+@@ -26,6 +26,13 @@
endchoice
@@ -2349,67 +8663,11 @@ index eb30783..43c5b9f 100644
endmenu
endif # PLATFORM_AT32AP
-diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
-index f1d3957..250372a 100644
---- a/arch/avr32/mach-at32ap/Makefile
-+++ b/arch/avr32/mach-at32ap/Makefile
-@@ -1,3 +1,5 @@
- obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
- obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o
- obj-$(CONFIG_CPU_AT32AP7000) += time-tc.o
-+obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
-+obj-$(CONFIG_GPIO_DEV) += gpio-dev.o
-diff --git a/arch/avr32/mach-at32ap/at32ap.c b/arch/avr32/mach-at32ap/at32ap.c
-index 90f207e..7c4987f 100644
---- a/arch/avr32/mach-at32ap/at32ap.c
-+++ b/arch/avr32/mach-at32ap/at32ap.c
-@@ -11,41 +11,10 @@
- #include <linux/init.h>
- #include <linux/platform_device.h>
-
--#include <asm/io.h>
--
- #include <asm/arch/init.h>
--#include <asm/arch/sm.h>
--
--struct at32_sm system_manager;
--
--static int __init at32_sm_init(void)
--{
-- struct resource *regs;
-- struct at32_sm *sm = &system_manager;
-- int ret = -ENXIO;
--
-- regs = platform_get_resource(&at32_sm_device, IORESOURCE_MEM, 0);
-- if (!regs)
-- goto fail;
--
-- spin_lock_init(&sm->lock);
-- sm->pdev = &at32_sm_device;
--
-- ret = -ENOMEM;
-- sm->regs = ioremap(regs->start, regs->end - regs->start + 1);
-- if (!sm->regs)
-- goto fail;
--
-- return 0;
--
--fail:
-- printk(KERN_ERR "Failed to initialize System Manager: %d\n", ret);
-- return ret;
--}
-
- void __init setup_platform(void)
- {
-- at32_sm_init();
- at32_clock_init();
- at32_portmux_init();
- }
-diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
-index 4dda42d..1130c8a 100644
---- a/arch/avr32/mach-at32ap/at32ap7000.c
-+++ b/arch/avr32/mach-at32ap/at32ap7000.c
-@@ -17,14 +17,20 @@
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap7000.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap7000.c (revision 1)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap7000.c (arbetskopia)
+@@ -17,15 +17,21 @@
#include <asm/arch/at32ap7000.h>
#include <asm/arch/board.h>
#include <asm/arch/portmux.h>
@@ -2422,17 +8680,18 @@ index 4dda42d..1130c8a 100644
#include "pio.h"
-#include "sm.h"
+#include "pm.h"
-+
+
+/*
+ * We can reduce the code size a bit by using a constant here. Since
+ * this file is completely chip-specific, it's safe to not use
+ * ioremap. Generic drivers should of course never do this.
+ */
+#define AT32_PM_BASE 0xfff00000
-
++
#define PBMEM(base) \
{ \
-@@ -88,6 +94,8 @@ static struct clk devname##_##_name = { \
+ .start = base, \
+@@ -88,6 +94,8 @@
.index = _index, \
}
@@ -2441,7 +8700,7 @@ index 4dda42d..1130c8a 100644
unsigned long at32ap7000_osc_rates[3] = {
[0] = 32768,
/* FIXME: these are ATSTK1002-specific */
-@@ -104,11 +112,11 @@ static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
+@@ -104,11 +112,11 @@
{
unsigned long div, mul, rate;
@@ -2456,7 +8715,7 @@ index 4dda42d..1130c8a 100644
rate = clk->parent->get_rate(clk->parent);
rate = (rate + div / 2) / div;
-@@ -121,7 +129,7 @@ static unsigned long pll0_get_rate(struct clk *clk)
+@@ -121,7 +129,7 @@
{
u32 control;
@@ -2465,7 +8724,7 @@ index 4dda42d..1130c8a 100644
return pll_get_rate(clk, control);
}
-@@ -130,7 +138,7 @@ static unsigned long pll1_get_rate(struct clk *clk)
+@@ -130,7 +138,7 @@
{
u32 control;
@@ -2474,7 +8733,7 @@ index 4dda42d..1130c8a 100644
return pll_get_rate(clk, control);
}
-@@ -187,108 +195,139 @@ static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
+@@ -187,108 +195,139 @@
static void cpu_clk_mode(struct clk *clk, int enabled)
{
@@ -2646,7 +8905,7 @@ index 4dda42d..1130c8a 100644
return bus_clk_get_rate(clk, shift);
}
-@@ -296,6 +335,7 @@ static unsigned long pbb_clk_get_rate(struct clk *clk)
+@@ -296,6 +335,7 @@
static struct clk cpu_clk = {
.name = "cpu",
.get_rate = cpu_clk_get_rate,
@@ -2654,7 +8913,7 @@ index 4dda42d..1130c8a 100644
.users = 1,
};
static struct clk hsb_clk = {
-@@ -327,12 +367,12 @@ static void genclk_mode(struct clk *clk, int enabled)
+@@ -327,12 +367,12 @@
{
u32 control;
@@ -2671,7 +8930,7 @@ index 4dda42d..1130c8a 100644
}
static unsigned long genclk_get_rate(struct clk *clk)
-@@ -340,9 +380,9 @@ static unsigned long genclk_get_rate(struct clk *clk)
+@@ -340,9 +380,9 @@
u32 control;
unsigned long div = 1;
@@ -2684,7 +8943,7 @@ index 4dda42d..1130c8a 100644
return clk->parent->get_rate(clk->parent) / div;
}
-@@ -353,23 +393,22 @@ static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
+@@ -353,23 +393,22 @@
unsigned long parent_rate, actual_rate, div;
parent_rate = clk->parent->get_rate(clk->parent);
@@ -2714,7 +8973,7 @@ index 4dda42d..1130c8a 100644
return actual_rate;
}
-@@ -378,24 +417,24 @@ int genclk_set_parent(struct clk *clk, struct clk *parent)
+@@ -378,24 +417,24 @@
{
u32 control;
@@ -2747,7 +9006,7 @@ index 4dda42d..1130c8a 100644
clk->parent = parent;
return 0;
-@@ -408,11 +447,11 @@ static void __init genclk_init_parent(struct clk *clk)
+@@ -408,11 +447,11 @@
BUG_ON(clk->index > 7);
@@ -2763,7 +9022,7 @@ index 4dda42d..1130c8a 100644
clk->parent = parent;
}
-@@ -420,21 +459,53 @@ static void __init genclk_init_parent(struct clk *clk)
+@@ -420,21 +459,53 @@
/* --------------------------------------------------------------------
* System peripherals
* -------------------------------------------------------------------- */
@@ -2772,12 +9031,6 @@ index 4dda42d..1130c8a 100644
- NAMED_IRQ(19, "eim"),
- NAMED_IRQ(20, "pm"),
- NAMED_IRQ(21, "rtc"),
--};
--struct platform_device at32_sm_device = {
-- .name = "sm",
-- .id = 0,
-- .resource = sm_resource,
-- .num_resources = ARRAY_SIZE(sm_resource),
+static struct resource at32_pm0_resource[] = {
+ {
+ .start = 0xfff00000,
@@ -2786,7 +9039,11 @@ index 4dda42d..1130c8a 100644
+ },
+ IRQ(20),
};
--static struct clk at32_sm_pclk = {
+-struct platform_device at32_sm_device = {
+- .name = "sm",
+- .id = 0,
+- .resource = sm_resource,
+- .num_resources = ARRAY_SIZE(sm_resource),
+
+static struct resource at32ap700x_rtc0_resource[] = {
+ {
@@ -2795,7 +9052,8 @@ index 4dda42d..1130c8a 100644
+ .flags = IORESOURCE_MEM,
+ },
+ IRQ(21),
-+};
+ };
+-static struct clk at32_sm_pclk = {
+
+static struct resource at32_wdt0_resource[] = {
+ {
@@ -2830,7 +9088,7 @@ index 4dda42d..1130c8a 100644
.parent = &pbb_clk,
.mode = pbb_clk_mode,
.get_rate = pbb_clk_get_rate,
-@@ -491,6 +562,17 @@ static struct clk pico_clk = {
+@@ -491,6 +562,17 @@
.users = 1,
};
@@ -2848,7 +9106,7 @@ index 4dda42d..1130c8a 100644
/* --------------------------------------------------------------------
* HMATRIX
* -------------------------------------------------------------------- */
-@@ -583,12 +665,14 @@ DEV_CLK(mck, pio4, pba, 14);
+@@ -583,12 +665,14 @@
void __init at32_add_system_devices(void)
{
@@ -2866,7 +9124,7 @@ index 4dda42d..1130c8a 100644
platform_device_register(&at32_systc0_device);
-@@ -894,6 +978,83 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+@@ -894,6 +978,83 @@
}
/* --------------------------------------------------------------------
@@ -2950,7 +9208,7 @@ index 4dda42d..1130c8a 100644
* LCDC
* -------------------------------------------------------------------- */
static struct atmel_lcdfb_info atmel_lcdfb0_data;
-@@ -1013,6 +1174,228 @@ err_dup_modedb:
+@@ -1013,6 +1174,228 @@
}
/* --------------------------------------------------------------------
@@ -3179,7 +9437,7 @@ index 4dda42d..1130c8a 100644
* GCLK
* -------------------------------------------------------------------- */
static struct clk gclk0 = {
-@@ -1066,7 +1449,7 @@ struct clk *at32_clock_list[] = {
+@@ -1066,7 +1449,7 @@
&hsb_clk,
&pba_clk,
&pbb_clk,
@@ -3188,7 +9446,7 @@ index 4dda42d..1130c8a 100644
&at32_intc0_pclk,
&hmatrix_clk,
&ebi_clk,
-@@ -1075,6 +1458,7 @@ struct clk *at32_clock_list[] = {
+@@ -1075,6 +1458,7 @@
&smc0_mck,
&pdc_hclk,
&pdc_pclk,
@@ -3196,7 +9454,7 @@ index 4dda42d..1130c8a 100644
&pico_clk,
&pio0_mck,
&pio1_mck,
-@@ -1092,8 +1476,18 @@ struct clk *at32_clock_list[] = {
+@@ -1092,8 +1476,18 @@
&macb1_pclk,
&atmel_spi0_spi_clk,
&atmel_spi1_spi_clk,
@@ -3215,7 +9473,7 @@ index 4dda42d..1130c8a 100644
&gclk0,
&gclk1,
&gclk2,
-@@ -1113,18 +1507,20 @@ void __init at32_portmux_init(void)
+@@ -1113,18 +1507,20 @@
void __init at32_clock_init(void)
{
@@ -3241,7 +9499,7 @@ index 4dda42d..1130c8a 100644
pll1.parent = &osc1;
genclk_init_parent(&gclk0);
-@@ -1133,6 +1529,7 @@ void __init at32_clock_init(void)
+@@ -1133,6 +1529,7 @@
genclk_init_parent(&gclk3);
genclk_init_parent(&gclk4);
genclk_init_parent(&atmel_lcdfb0_pixclk);
@@ -3249,7 +9507,7 @@ index 4dda42d..1130c8a 100644
/*
* Turn on all clocks that have at least one user already, and
-@@ -1157,8 +1554,8 @@ void __init at32_clock_init(void)
+@@ -1157,8 +1554,8 @@
pbb_mask |= 1 << clk->index;
}
@@ -3262,11 +9520,10 @@ index 4dda42d..1130c8a 100644
+ pm_writel(PBA_MASK, pba_mask);
+ pm_writel(PBB_MASK, pbb_mask);
}
-diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/arch/avr32/mach-at32ap/cpufreq.c
-new file mode 100644
-index 0000000..235524b
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/cpufreq.c
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/cpufreq.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/cpufreq.c (revision 0)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/cpufreq.c (revision 0)
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2004-2007 Atmel Corporation
@@ -3380,304 +9637,10 @@ index 0000000..235524b
+}
+
+arch_initcall(at32_cpufreq_init);
-diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c
-index 4a60ecc..8acd010 100644
---- a/arch/avr32/mach-at32ap/extint.c
-+++ b/arch/avr32/mach-at32ap/extint.c
-@@ -17,42 +17,83 @@
-
- #include <asm/io.h>
-
--#include <asm/arch/sm.h>
--
--#include "sm.h"
-+/* EIC register offsets */
-+#define EIC_IER 0x0000
-+#define EIC_IDR 0x0004
-+#define EIC_IMR 0x0008
-+#define EIC_ISR 0x000c
-+#define EIC_ICR 0x0010
-+#define EIC_MODE 0x0014
-+#define EIC_EDGE 0x0018
-+#define EIC_LEVEL 0x001c
-+#define EIC_TEST 0x0020
-+#define EIC_NMIC 0x0024
-+
-+/* Bitfields in TEST */
-+#define EIC_TESTEN_OFFSET 31
-+#define EIC_TESTEN_SIZE 1
-+
-+/* Bitfields in NMIC */
-+#define EIC_EN_OFFSET 0
-+#define EIC_EN_SIZE 1
-+
-+/* Bit manipulation macros */
-+#define EIC_BIT(name) \
-+ (1 << EIC_##name##_OFFSET)
-+#define EIC_BF(name,value) \
-+ (((value) & ((1 << EIC_##name##_SIZE) - 1)) \
-+ << EIC_##name##_OFFSET)
-+#define EIC_BFEXT(name,value) \
-+ (((value) >> EIC_##name##_OFFSET) \
-+ & ((1 << EIC_##name##_SIZE) - 1))
-+#define EIC_BFINS(name,value,old) \
-+ (((old) & ~(((1 << EIC_##name##_SIZE) - 1) \
-+ << EIC_##name##_OFFSET)) \
-+ | EIC_BF(name,value))
-+
-+/* Register access macros */
-+#define eic_readl(port,reg) \
-+ __raw_readl((port)->regs + EIC_##reg)
-+#define eic_writel(port,reg,value) \
-+ __raw_writel((value), (port)->regs + EIC_##reg)
-+
-+struct eic {
-+ void __iomem *regs;
-+ struct irq_chip *chip;
-+ unsigned int first_irq;
-+};
-
--static void eim_ack_irq(unsigned int irq)
-+static void eic_ack_irq(unsigned int irq)
- {
-- struct at32_sm *sm = get_irq_chip_data(irq);
-- sm_writel(sm, EIM_ICR, 1 << (irq - sm->eim_first_irq));
-+ struct eic *eic = get_irq_chip_data(irq);
-+ eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
- }
-
--static void eim_mask_irq(unsigned int irq)
-+static void eic_mask_irq(unsigned int irq)
- {
-- struct at32_sm *sm = get_irq_chip_data(irq);
-- sm_writel(sm, EIM_IDR, 1 << (irq - sm->eim_first_irq));
-+ struct eic *eic = get_irq_chip_data(irq);
-+ eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
- }
-
--static void eim_mask_ack_irq(unsigned int irq)
-+static void eic_mask_ack_irq(unsigned int irq)
- {
-- struct at32_sm *sm = get_irq_chip_data(irq);
-- sm_writel(sm, EIM_ICR, 1 << (irq - sm->eim_first_irq));
-- sm_writel(sm, EIM_IDR, 1 << (irq - sm->eim_first_irq));
-+ struct eic *eic = get_irq_chip_data(irq);
-+ eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
-+ eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
- }
-
--static void eim_unmask_irq(unsigned int irq)
-+static void eic_unmask_irq(unsigned int irq)
- {
-- struct at32_sm *sm = get_irq_chip_data(irq);
-- sm_writel(sm, EIM_IER, 1 << (irq - sm->eim_first_irq));
-+ struct eic *eic = get_irq_chip_data(irq);
-+ eic_writel(eic, IER, 1 << (irq - eic->first_irq));
- }
-
--static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
-+static int eic_set_irq_type(unsigned int irq, unsigned int flow_type)
- {
-- struct at32_sm *sm = get_irq_chip_data(irq);
-+ struct eic *eic = get_irq_chip_data(irq);
- struct irq_desc *desc;
-- unsigned int i = irq - sm->eim_first_irq;
-+ unsigned int i = irq - eic->first_irq;
- u32 mode, edge, level;
-- unsigned long flags;
- int ret = 0;
-
- flow_type &= IRQ_TYPE_SENSE_MASK;
-@@ -60,11 +101,10 @@ static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
- flow_type = IRQ_TYPE_LEVEL_LOW;
-
- desc = &irq_desc[irq];
-- spin_lock_irqsave(&sm->lock, flags);
-
-- mode = sm_readl(sm, EIM_MODE);
-- edge = sm_readl(sm, EIM_EDGE);
-- level = sm_readl(sm, EIM_LEVEL);
-+ mode = eic_readl(eic, MODE);
-+ edge = eic_readl(eic, EDGE);
-+ level = eic_readl(eic, LEVEL);
-
- switch (flow_type) {
- case IRQ_TYPE_LEVEL_LOW:
-@@ -89,9 +129,9 @@ static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
- }
-
- if (ret == 0) {
-- sm_writel(sm, EIM_MODE, mode);
-- sm_writel(sm, EIM_EDGE, edge);
-- sm_writel(sm, EIM_LEVEL, level);
-+ eic_writel(eic, MODE, mode);
-+ eic_writel(eic, EDGE, edge);
-+ eic_writel(eic, LEVEL, level);
-
- if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
- flow_type |= IRQ_LEVEL;
-@@ -99,35 +139,33 @@ static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
- desc->status |= flow_type;
- }
-
-- spin_unlock_irqrestore(&sm->lock, flags);
--
- return ret;
- }
-
--struct irq_chip eim_chip = {
-- .name = "eim",
-- .ack = eim_ack_irq,
-- .mask = eim_mask_irq,
-- .mask_ack = eim_mask_ack_irq,
-- .unmask = eim_unmask_irq,
-- .set_type = eim_set_irq_type,
-+struct irq_chip eic_chip = {
-+ .name = "eic",
-+ .ack = eic_ack_irq,
-+ .mask = eic_mask_irq,
-+ .mask_ack = eic_mask_ack_irq,
-+ .unmask = eic_unmask_irq,
-+ .set_type = eic_set_irq_type,
- };
-
--static void demux_eim_irq(unsigned int irq, struct irq_desc *desc)
-+static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
- {
-- struct at32_sm *sm = desc->handler_data;
-+ struct eic *eic = desc->handler_data;
- struct irq_desc *ext_desc;
- unsigned long status, pending;
- unsigned int i, ext_irq;
-
-- status = sm_readl(sm, EIM_ISR);
-- pending = status & sm_readl(sm, EIM_IMR);
-+ status = eic_readl(eic, ISR);
-+ pending = status & eic_readl(eic, IMR);
-
- while (pending) {
- i = fls(pending) - 1;
- pending &= ~(1 << i);
-
-- ext_irq = i + sm->eim_first_irq;
-+ ext_irq = i + eic->first_irq;
- ext_desc = irq_desc + ext_irq;
- if (ext_desc->status & IRQ_LEVEL)
- handle_level_irq(ext_irq, ext_desc);
-@@ -136,51 +174,85 @@ static void demux_eim_irq(unsigned int irq, struct irq_desc *desc)
- }
- }
-
--static int __init eim_init(void)
-+static int __init eic_probe(struct platform_device *pdev)
- {
-- struct at32_sm *sm = &system_manager;
-+ struct eic *eic;
-+ struct resource *regs;
- unsigned int i;
- unsigned int nr_irqs;
- unsigned int int_irq;
-+ int ret;
- u32 pattern;
-
-- /*
-- * The EIM is really the same module as SM, so register
-- * mapping, etc. has been taken care of already.
-- */
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ int_irq = platform_get_irq(pdev, 0);
-+ if (!regs || !int_irq) {
-+ dev_dbg(&pdev->dev, "missing regs and/or irq resource\n");
-+ return -ENXIO;
-+ }
-+
-+ ret = -ENOMEM;
-+ eic = kzalloc(sizeof(struct eic), GFP_KERNEL);
-+ if (!eic) {
-+ dev_dbg(&pdev->dev, "no memory for eic structure\n");
-+ goto err_kzalloc;
-+ }
-+
-+ eic->first_irq = EIM_IRQ_BASE + 32 * pdev->id;
-+ eic->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!eic->regs) {
-+ dev_dbg(&pdev->dev, "failed to map regs\n");
-+ goto err_ioremap;
-+ }
-
- /*
- * Find out how many interrupt lines that are actually
- * implemented in hardware.
- */
-- sm_writel(sm, EIM_IDR, ~0UL);
-- sm_writel(sm, EIM_MODE, ~0UL);
-- pattern = sm_readl(sm, EIM_MODE);
-+ eic_writel(eic, IDR, ~0UL);
-+ eic_writel(eic, MODE, ~0UL);
-+ pattern = eic_readl(eic, MODE);
- nr_irqs = fls(pattern);
-
- /* Trigger on falling edge unless overridden by driver */
-- sm_writel(sm, EIM_MODE, 0UL);
-- sm_writel(sm, EIM_EDGE, 0UL);
-+ eic_writel(eic, MODE, 0UL);
-+ eic_writel(eic, EDGE, 0UL);
-
-- sm->eim_chip = &eim_chip;
-+ eic->chip = &eic_chip;
-
- for (i = 0; i < nr_irqs; i++) {
- /* NOTE the handler we set here is ignored by the demux */
-- set_irq_chip_and_handler(sm->eim_first_irq + i, &eim_chip,
-+ set_irq_chip_and_handler(eic->first_irq + i, &eic_chip,
- handle_level_irq);
-- set_irq_chip_data(sm->eim_first_irq + i, sm);
-+ set_irq_chip_data(eic->first_irq + i, eic);
- }
-
-- int_irq = platform_get_irq_byname(sm->pdev, "eim");
--
-- set_irq_chained_handler(int_irq, demux_eim_irq);
-- set_irq_data(int_irq, sm);
-+ set_irq_chained_handler(int_irq, demux_eic_irq);
-+ set_irq_data(int_irq, eic);
-
-- printk("EIM: External Interrupt Module at 0x%p, IRQ %u\n",
-- sm->regs, int_irq);
-- printk("EIM: Handling %u external IRQs, starting with IRQ %u\n",
-- nr_irqs, sm->eim_first_irq);
-+ dev_info(&pdev->dev,
-+ "External Interrupt Controller at 0x%p, IRQ %u\n",
-+ eic->regs, int_irq);
-+ dev_info(&pdev->dev,
-+ "Handling %u external IRQs, starting with IRQ %u\n",
-+ nr_irqs, eic->first_irq);
-
- return 0;
-+
-+err_ioremap:
-+ kfree(eic);
-+err_kzalloc:
-+ return ret;
-+}
-+
-+static struct platform_driver eic_driver = {
-+ .driver = {
-+ .name = "at32_eic",
-+ },
-+};
-+
-+static int __init eic_init(void)
-+{
-+ return platform_driver_probe(&eic_driver, eic_probe);
- }
--arch_initcall(eim_init);
-+arch_initcall(eic_init);
-diff --git a/arch/avr32/mach-at32ap/gpio-dev.c b/arch/avr32/mach-at32ap/gpio-dev.c
-new file mode 100644
-index 0000000..3d4810d
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/gpio-dev.c
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/gpio-dev.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/gpio-dev.c (revision 0)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/gpio-dev.c (revision 0)
@@ -0,0 +1,570 @@
+/*
+ * GPIO /dev and configfs interface
@@ -4249,98 +10212,302 @@ index 0000000..3d4810d
+ return err;
+}
+late_initcall(gpio_dev_init);
-diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
-index 1eb99b8..153bb9a 100644
---- a/arch/avr32/mach-at32ap/pio.c
-+++ b/arch/avr32/mach-at32ap/pio.c
-@@ -158,6 +158,82 @@ fail:
- dump_stack();
- }
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/extint.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/extint.c (revision 1)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/extint.c (arbetskopia)
+@@ -17,42 +17,83 @@
-+#ifdef CONFIG_GPIO_DEV
-+
-+/* Gang allocators and accessors; used by the GPIO /dev driver */
-+int at32_gpio_port_is_valid(unsigned int port)
-+{
-+ return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
-+}
+ #include <asm/io.h>
+
+-#include <asm/arch/sm.h>
++/* EIC register offsets */
++#define EIC_IER 0x0000
++#define EIC_IDR 0x0004
++#define EIC_IMR 0x0008
++#define EIC_ISR 0x000c
++#define EIC_ICR 0x0010
++#define EIC_MODE 0x0014
++#define EIC_EDGE 0x0018
++#define EIC_LEVEL 0x001c
++#define EIC_TEST 0x0020
++#define EIC_NMIC 0x0024
+
+-#include "sm.h"
++/* Bitfields in TEST */
++#define EIC_TESTEN_OFFSET 31
++#define EIC_TESTEN_SIZE 1
+
+-static void eim_ack_irq(unsigned int irq)
++/* Bitfields in NMIC */
++#define EIC_EN_OFFSET 0
++#define EIC_EN_SIZE 1
+
-+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
-+{
-+ struct pio_device *pio;
-+ u32 old, new;
++/* Bit manipulation macros */
++#define EIC_BIT(name) \
++ (1 << EIC_##name##_OFFSET)
++#define EIC_BF(name,value) \
++ (((value) & ((1 << EIC_##name##_SIZE) - 1)) \
++ << EIC_##name##_OFFSET)
++#define EIC_BFEXT(name,value) \
++ (((value) >> EIC_##name##_OFFSET) \
++ & ((1 << EIC_##name##_SIZE) - 1))
++#define EIC_BFINS(name,value,old) \
++ (((old) & ~(((1 << EIC_##name##_SIZE) - 1) \
++ << EIC_##name##_OFFSET)) \
++ | EIC_BF(name,value))
+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
++/* Register access macros */
++#define eic_readl(port,reg) \
++ __raw_readl((port)->regs + EIC_##reg)
++#define eic_writel(port,reg,value) \
++ __raw_writel((value), (port)->regs + EIC_##reg)
+
-+ /* Try to allocate the pins */
-+ do {
-+ old = pio->pinmux_mask;
-+ if (old & pins)
-+ return -EBUSY;
++struct eic {
++ void __iomem *regs;
++ struct irq_chip *chip;
++ unsigned int first_irq;
++};
+
-+ new = old | pins;
-+ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++static void eic_ack_irq(unsigned int irq)
+ {
+- struct at32_sm *sm = get_irq_chip_data(irq);
+- sm_writel(sm, EIM_ICR, 1 << (irq - sm->eim_first_irq));
++ struct eic *eic = get_irq_chip_data(irq);
++ eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
+ }
+
+-static void eim_mask_irq(unsigned int irq)
++static void eic_mask_irq(unsigned int irq)
+ {
+- struct at32_sm *sm = get_irq_chip_data(irq);
+- sm_writel(sm, EIM_IDR, 1 << (irq - sm->eim_first_irq));
++ struct eic *eic = get_irq_chip_data(irq);
++ eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
+ }
+
+-static void eim_mask_ack_irq(unsigned int irq)
++static void eic_mask_ack_irq(unsigned int irq)
+ {
+- struct at32_sm *sm = get_irq_chip_data(irq);
+- sm_writel(sm, EIM_ICR, 1 << (irq - sm->eim_first_irq));
+- sm_writel(sm, EIM_IDR, 1 << (irq - sm->eim_first_irq));
++ struct eic *eic = get_irq_chip_data(irq);
++ eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
++ eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
+ }
+
+-static void eim_unmask_irq(unsigned int irq)
++static void eic_unmask_irq(unsigned int irq)
+ {
+- struct at32_sm *sm = get_irq_chip_data(irq);
+- sm_writel(sm, EIM_IER, 1 << (irq - sm->eim_first_irq));
++ struct eic *eic = get_irq_chip_data(irq);
++ eic_writel(eic, IER, 1 << (irq - eic->first_irq));
+ }
+
+-static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
++static int eic_set_irq_type(unsigned int irq, unsigned int flow_type)
+ {
+- struct at32_sm *sm = get_irq_chip_data(irq);
++ struct eic *eic = get_irq_chip_data(irq);
+ struct irq_desc *desc;
+- unsigned int i = irq - sm->eim_first_irq;
++ unsigned int i = irq - eic->first_irq;
+ u32 mode, edge, level;
+- unsigned long flags;
+ int ret = 0;
+
+ flow_type &= IRQ_TYPE_SENSE_MASK;
+@@ -60,11 +101,10 @@
+ flow_type = IRQ_TYPE_LEVEL_LOW;
+
+ desc = &irq_desc[irq];
+- spin_lock_irqsave(&sm->lock, flags);
+
+- mode = sm_readl(sm, EIM_MODE);
+- edge = sm_readl(sm, EIM_EDGE);
+- level = sm_readl(sm, EIM_LEVEL);
++ mode = eic_readl(eic, MODE);
++ edge = eic_readl(eic, EDGE);
++ level = eic_readl(eic, LEVEL);
+
+ switch (flow_type) {
+ case IRQ_TYPE_LEVEL_LOW:
+@@ -89,9 +129,9 @@
+ }
+
+ if (ret == 0) {
+- sm_writel(sm, EIM_MODE, mode);
+- sm_writel(sm, EIM_EDGE, edge);
+- sm_writel(sm, EIM_LEVEL, level);
++ eic_writel(eic, MODE, mode);
++ eic_writel(eic, EDGE, edge);
++ eic_writel(eic, LEVEL, level);
+
+ if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+ flow_type |= IRQ_LEVEL;
+@@ -99,35 +139,33 @@
+ desc->status |= flow_type;
+ }
+
+- spin_unlock_irqrestore(&sm->lock, flags);
+-
+ return ret;
+ }
+
+-struct irq_chip eim_chip = {
+- .name = "eim",
+- .ack = eim_ack_irq,
+- .mask = eim_mask_irq,
+- .mask_ack = eim_mask_ack_irq,
+- .unmask = eim_unmask_irq,
+- .set_type = eim_set_irq_type,
++struct irq_chip eic_chip = {
++ .name = "eic",
++ .ack = eic_ack_irq,
++ .mask = eic_mask_irq,
++ .mask_ack = eic_mask_ack_irq,
++ .unmask = eic_unmask_irq,
++ .set_type = eic_set_irq_type,
+ };
+
+-static void demux_eim_irq(unsigned int irq, struct irq_desc *desc)
++static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
+ {
+- struct at32_sm *sm = desc->handler_data;
++ struct eic *eic = desc->handler_data;
+ struct irq_desc *ext_desc;
+ unsigned long status, pending;
+ unsigned int i, ext_irq;
+
+- status = sm_readl(sm, EIM_ISR);
+- pending = status & sm_readl(sm, EIM_IMR);
++ status = eic_readl(eic, ISR);
++ pending = status & eic_readl(eic, IMR);
+
+ while (pending) {
+ i = fls(pending) - 1;
+ pending &= ~(1 << i);
+
+- ext_irq = i + sm->eim_first_irq;
++ ext_irq = i + eic->first_irq;
+ ext_desc = irq_desc + ext_irq;
+ if (ext_desc->status & IRQ_LEVEL)
+ handle_level_irq(ext_irq, ext_desc);
+@@ -136,51 +174,85 @@
+ }
+ }
+
+-static int __init eim_init(void)
++static int __init eic_probe(struct platform_device *pdev)
+ {
+- struct at32_sm *sm = &system_manager;
++ struct eic *eic;
++ struct resource *regs;
+ unsigned int i;
+ unsigned int nr_irqs;
+ unsigned int int_irq;
++ int ret;
+ u32 pattern;
+
+- /*
+- * The EIM is really the same module as SM, so register
+- * mapping, etc. has been taken care of already.
+- */
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ int_irq = platform_get_irq(pdev, 0);
++ if (!regs || !int_irq) {
++ dev_dbg(&pdev->dev, "missing regs and/or irq resource\n");
++ return -ENXIO;
++ }
+
++ ret = -ENOMEM;
++ eic = kzalloc(sizeof(struct eic), GFP_KERNEL);
++ if (!eic) {
++ dev_dbg(&pdev->dev, "no memory for eic structure\n");
++ goto err_kzalloc;
++ }
+
-+ /* That went well, now configure the port */
-+ pio_writel(pio, OER, oe_mask);
-+ pio_writel(pio, PER, pins);
++ eic->first_irq = EIM_IRQ_BASE + 32 * pdev->id;
++ eic->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!eic->regs) {
++ dev_dbg(&pdev->dev, "failed to map regs\n");
++ goto err_ioremap;
++ }
+
+ /*
+ * Find out how many interrupt lines that are actually
+ * implemented in hardware.
+ */
+- sm_writel(sm, EIM_IDR, ~0UL);
+- sm_writel(sm, EIM_MODE, ~0UL);
+- pattern = sm_readl(sm, EIM_MODE);
++ eic_writel(eic, IDR, ~0UL);
++ eic_writel(eic, MODE, ~0UL);
++ pattern = eic_readl(eic, MODE);
+ nr_irqs = fls(pattern);
+
+ /* Trigger on falling edge unless overridden by driver */
+- sm_writel(sm, EIM_MODE, 0UL);
+- sm_writel(sm, EIM_EDGE, 0UL);
++ eic_writel(eic, MODE, 0UL);
++ eic_writel(eic, EDGE, 0UL);
+
+- sm->eim_chip = &eim_chip;
++ eic->chip = &eic_chip;
+
+ for (i = 0; i < nr_irqs; i++) {
+ /* NOTE the handler we set here is ignored by the demux */
+- set_irq_chip_and_handler(sm->eim_first_irq + i, &eim_chip,
++ set_irq_chip_and_handler(eic->first_irq + i, &eic_chip,
+ handle_level_irq);
+- set_irq_chip_data(sm->eim_first_irq + i, sm);
++ set_irq_chip_data(eic->first_irq + i, eic);
+ }
+
+- int_irq = platform_get_irq_byname(sm->pdev, "eim");
++ set_irq_chained_handler(int_irq, demux_eic_irq);
++ set_irq_data(int_irq, eic);
+
+- set_irq_chained_handler(int_irq, demux_eim_irq);
+- set_irq_data(int_irq, sm);
++ dev_info(&pdev->dev,
++ "External Interrupt Controller at 0x%p, IRQ %u\n",
++ eic->regs, int_irq);
++ dev_info(&pdev->dev,
++ "Handling %u external IRQs, starting with IRQ %u\n",
++ nr_irqs, eic->first_irq);
+
+- printk("EIM: External Interrupt Module at 0x%p, IRQ %u\n",
+- sm->regs, int_irq);
+- printk("EIM: Handling %u external IRQs, starting with IRQ %u\n",
+- nr_irqs, sm->eim_first_irq);
+ return 0;
-+}
-+
-+void at32_deselect_pins(unsigned int port, u32 pins)
-+{
-+ struct pio_device *pio;
-+ u32 old, new;
-+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
-+
-+ /* Return to a "safe" mux configuration */
-+ pio_writel(pio, PUER, pins);
-+ pio_writel(pio, ODR, pins);
-+
-+ /* Deallocate the pins */
-+ do {
-+ old = pio->pinmux_mask;
-+ new = old & ~pins;
-+ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
-+}
-+
-+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
-+{
-+ struct pio_device *pio;
-+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
+
+- return 0;
++err_ioremap:
++ kfree(eic);
++err_kzalloc:
++ return ret;
+ }
+-arch_initcall(eim_init);
+
-+ return pio_readl(pio, PDSR) & pins;
-+}
++static struct platform_driver eic_driver = {
++ .driver = {
++ .name = "at32_eic",
++ },
++};
+
-+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
++static int __init eic_init(void)
+{
-+ struct pio_device *pio;
-+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
-+
-+ /* No atomic updates for now... */
-+ pio_writel(pio, CODR, ~value & mask);
-+ pio_writel(pio, SODR, value & mask);
++ return platform_driver_probe(&eic_driver, eic_probe);
+}
-+
-+#endif /* CONFIG_GPIO_DEV */
-+
-+
- /*--------------------------------------------------------------------------*/
-
- /* GPIO API */
-diff --git a/arch/avr32/mach-at32ap/pm.h b/arch/avr32/mach-at32ap/pm.h
-new file mode 100644
-index 0000000..a1f8ace
---- /dev/null
-+++ b/arch/avr32/mach-at32ap/pm.h
++arch_initcall(eic_init);
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/pm.h
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/pm.h (revision 0)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/pm.h (revision 0)
@@ -0,0 +1,112 @@
+/*
+ * Register definitions for the Power Manager (PM)
@@ -4454,11 +10621,10 @@ index 0000000..a1f8ace
+ __raw_writel((value), (void __iomem *)AT32_PM_BASE + PM_##reg)
+
+#endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */
-diff --git a/arch/avr32/mach-at32ap/sm.h b/arch/avr32/mach-at32ap/sm.h
-deleted file mode 100644
-index cad02b5..0000000
---- a/arch/avr32/mach-at32ap/sm.h
-+++ /dev/null
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/sm.h
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/sm.h (revision 1)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/sm.h (arbetskopia)
@@ -1,242 +0,0 @@
-/*
- * Register definitions for SM
@@ -4702,11 +10868,1118 @@ index cad02b5..0000000
- __raw_writel((value), (port)->regs + SM_##reg)
-
-#endif /* __ASM_AVR32_SM_H__ */
-diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c
-index 099212d..26f29c6 100644
---- a/arch/avr32/mm/dma-coherent.c
-+++ b/arch/avr32/mm/dma-coherent.c
-@@ -41,6 +41,13 @@ static struct page *__dma_alloc(struct device *dev, size_t size,
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/pio.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/pio.c (revision 1)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/pio.c (arbetskopia)
+@@ -158,6 +158,82 @@
+ dump_stack();
+ }
+
++#ifdef CONFIG_GPIO_DEV
++
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port)
++{
++ return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
++}
++
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
++{
++ struct pio_device *pio;
++ u32 old, new;
++
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
++
++ /* Try to allocate the pins */
++ do {
++ old = pio->pinmux_mask;
++ if (old & pins)
++ return -EBUSY;
++
++ new = old | pins;
++ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++
++ /* That went well, now configure the port */
++ pio_writel(pio, OER, oe_mask);
++ pio_writel(pio, PER, pins);
++
++ return 0;
++}
++
++void at32_deselect_pins(unsigned int port, u32 pins)
++{
++ struct pio_device *pio;
++ u32 old, new;
++
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++ /* Return to a "safe" mux configuration */
++ pio_writel(pio, PUER, pins);
++ pio_writel(pio, ODR, pins);
++
++ /* Deallocate the pins */
++ do {
++ old = pio->pinmux_mask;
++ new = old & ~pins;
++ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++}
++
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
++{
++ struct pio_device *pio;
++
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++ return pio_readl(pio, PDSR) & pins;
++}
++
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
++{
++ struct pio_device *pio;
++
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++ /* No atomic updates for now... */
++ pio_writel(pio, CODR, ~value & mask);
++ pio_writel(pio, SODR, value & mask);
++}
++
++#endif /* CONFIG_GPIO_DEV */
++
++
+ /*--------------------------------------------------------------------------*/
+
+ /* GPIO API */
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap.c (revision 1)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap.c (arbetskopia)
+@@ -11,41 +11,10 @@
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+
+-#include <asm/io.h>
+-
+ #include <asm/arch/init.h>
+-#include <asm/arch/sm.h>
+
+-struct at32_sm system_manager;
+-
+-static int __init at32_sm_init(void)
+-{
+- struct resource *regs;
+- struct at32_sm *sm = &system_manager;
+- int ret = -ENXIO;
+-
+- regs = platform_get_resource(&at32_sm_device, IORESOURCE_MEM, 0);
+- if (!regs)
+- goto fail;
+-
+- spin_lock_init(&sm->lock);
+- sm->pdev = &at32_sm_device;
+-
+- ret = -ENOMEM;
+- sm->regs = ioremap(regs->start, regs->end - regs->start + 1);
+- if (!sm->regs)
+- goto fail;
+-
+- return 0;
+-
+-fail:
+- printk(KERN_ERR "Failed to initialize System Manager: %d\n", ret);
+- return ret;
+-}
+-
+ void __init setup_platform(void)
+ {
+- at32_sm_init();
+ at32_clock_init();
+ at32_portmux_init();
+ }
+Index: linux-2.6.22.1/arch/avr32/mach-at32ap/Makefile
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/Makefile (revision 1)
++++ linux-2.6.22.1/arch/avr32/mach-at32ap/Makefile (arbetskopia)
+@@ -1,3 +1,5 @@
+ obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
+ obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o
+ obj-$(CONFIG_CPU_AT32AP7000) += time-tc.o
++obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
++obj-$(CONFIG_GPIO_DEV) += gpio-dev.o
+Index: linux-2.6.22.1/arch/avr32/Kconfig
+===================================================================
+--- linux-2.6.22.1/arch/avr32/Kconfig (revision 1)
++++ linux-2.6.22.1/arch/avr32/Kconfig (arbetskopia)
+@@ -113,6 +113,13 @@
+ bool "ATNGW100 Network Gateway"
+ endchoice
+
++if BOARD_ATSTK1000
++source "arch/avr32/boards/atstk1000/Kconfig"
++endif
++if BOARD_ATNGW100
++source "arch/avr32/boards/atngw100/Kconfig"
++endif
++
+ choice
+ prompt "Boot loader type"
+ default LOADER_U_BOOT
+@@ -171,6 +178,10 @@
+ enabling Nexus-compliant debuggers to keep track of the PID of the
+ currently executing task.
+
++config DW_DMAC
++ tristate "Synopsys DesignWare DMA Controller support"
++ default y if CPU_AT32AP7000
++
+ # FPU emulation goes here
+
+ source "kernel/Kconfig.hz"
+@@ -185,6 +196,27 @@
+
+ endmenu
+
++menu "Power managment options"
++
++menu "CPU Frequency scaling"
++
++source "drivers/cpufreq/Kconfig"
++
++config CPU_FREQ_AT32AP
++ bool "CPU frequency driver for AT32AP"
++ depends on CPU_FREQ && PLATFORM_AT32AP
++ default n
++ help
++ This enables the CPU frequency driver for AT32AP processors.
++
++ For details, take a look in <file:Documentation/cpu-freq>.
++
++ If in doubt, say N.
++
++endmenu
++
++endmenu
++
+ menu "Bus options"
+
+ config PCI
+Index: linux-2.6.22.1/arch/avr32/configs/atngw100_defconfig
+===================================================================
+--- linux-2.6.22.1/arch/avr32/configs/atngw100_defconfig (revision 1)
++++ linux-2.6.22.1/arch/avr32/configs/atngw100_defconfig (arbetskopia)
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.22-rc5
+-# Sat Jun 23 15:40:05 2007
++# Linux kernel version: 2.6.22.atmel.1
++# Thu Jul 12 17:49:20 2007
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+@@ -114,6 +114,7 @@
+ CONFIG_CPU_AT32AP7000=y
+ # CONFIG_BOARD_ATSTK1000 is not set
+ CONFIG_BOARD_ATNGW100=y
++# CONFIG_BOARD_ATNGW100_I2C_GPIO is not set
+ CONFIG_LOADER_U_BOOT=y
+
+ #
+@@ -122,6 +123,7 @@
+ # CONFIG_AP7000_32_BIT_SMC is not set
+ CONFIG_AP7000_16_BIT_SMC=y
+ # CONFIG_AP7000_8_BIT_SMC is not set
++CONFIG_GPIO_DEV=y
+ CONFIG_LOAD_ADDRESS=0x10000000
+ CONFIG_ENTRY_ADDRESS=0x90000000
+ CONFIG_PHYS_OFFSET=0x10000000
+@@ -145,6 +147,7 @@
+ # CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
+ # CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_DW_DMAC=y
+ # CONFIG_HZ_100 is not set
+ CONFIG_HZ_250=y
+ # CONFIG_HZ_300 is not set
+@@ -153,6 +156,27 @@
+ CONFIG_CMDLINE=""
+
+ #
++# Power managment options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++CONFIG_CPU_FREQ_STAT=m
++# CONFIG_CPU_FREQ_STAT_DETAILS is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
+ # Bus options
+ #
+ # CONFIG_ARCH_SUPPORTS_MSI is not set
+@@ -187,13 +211,8 @@
+ # CONFIG_NET_KEY_MIGRATE is not set
+ CONFIG_INET=y
+ CONFIG_IP_MULTICAST=y
+-CONFIG_IP_ADVANCED_ROUTER=y
+-CONFIG_ASK_IP_FIB_HASH=y
+-# CONFIG_IP_FIB_TRIE is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
+ CONFIG_IP_FIB_HASH=y
+-# CONFIG_IP_MULTIPLE_TABLES is not set
+-# CONFIG_IP_ROUTE_MULTIPATH is not set
+-# CONFIG_IP_ROUTE_VERBOSE is not set
+ CONFIG_IP_PNP=y
+ CONFIG_IP_PNP_DHCP=y
+ # CONFIG_IP_PNP_BOOTP is not set
+@@ -240,6 +259,7 @@
+ # CONFIG_NETWORK_SECMARK is not set
+ CONFIG_NETFILTER=y
+ # CONFIG_NETFILTER_DEBUG is not set
++CONFIG_BRIDGE_NETFILTER=y
+
+ #
+ # Core Netfilter Configuration
+@@ -284,6 +304,7 @@
+ CONFIG_NETFILTER_XT_MATCH_MARK=m
+ CONFIG_NETFILTER_XT_MATCH_POLICY=m
+ CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+ CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+ CONFIG_NETFILTER_XT_MATCH_REALM=m
+@@ -359,13 +380,19 @@
+ CONFIG_IP6_NF_MANGLE=m
+ CONFIG_IP6_NF_TARGET_HL=m
+ CONFIG_IP6_NF_RAW=m
++
++#
++# Bridge: Netfilter Configuration
++#
++# CONFIG_BRIDGE_NF_EBTABLES is not set
+ # CONFIG_IP_DCCP is not set
+ # CONFIG_IP_SCTP is not set
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
++CONFIG_BRIDGE=m
+ CONFIG_VLAN_8021Q=m
+ # CONFIG_DECNET is not set
++CONFIG_LLC=m
+ # CONFIG_LLC2 is not set
+ # CONFIG_IPX is not set
+ # CONFIG_ATALK is not set
+@@ -521,7 +548,6 @@
+ #
+ # Misc devices
+ #
+-# CONFIG_BLINK is not set
+ # CONFIG_IDE is not set
+
+ #
+@@ -545,13 +571,26 @@
+ # CONFIG_BONDING is not set
+ # CONFIG_EQUALIZER is not set
+ CONFIG_TUN=m
+-# CONFIG_PHYLIB is not set
++CONFIG_PHYLIB=y
+
+ #
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_FIXED_PHY is not set
++
++#
+ # Ethernet (10 or 100Mbit)
+ #
+ CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
++# CONFIG_MII is not set
+ CONFIG_MACB=y
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+@@ -625,7 +664,15 @@
+ # IPMI
+ #
+ # CONFIG_IPMI_HANDLER is not set
+-# CONFIG_WATCHDOG is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++CONFIG_AT32AP700X_WDT_TIMEOUT=2
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_RTC is not set
+ # CONFIG_GEN_RTC is not set
+@@ -636,9 +683,44 @@
+ # TPM devices
+ #
+ # CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
+
+ #
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_ATMELTWI=m
++CONFIG_I2C_ATMELTWI_BAUDRATE=100000
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
+ # SPI support
+ #
+ CONFIG_SPI=y
+@@ -655,7 +737,7 @@
+ # SPI Protocol Masters
+ #
+ # CONFIG_SPI_AT25 is not set
+-# CONFIG_SPI_SPIDEV is not set
++CONFIG_SPI_SPIDEV=m
+
+ #
+ # Dallas's 1-wire bus
+@@ -706,21 +788,59 @@
+ #
+ # USB Gadget Support
+ #
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
+
+ #
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_ATMELMCI=y
++
++#
+ # LED devices
+ #
+-# CONFIG_NEW_LEDS is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
+
+ #
+ # LED drivers
+ #
++CONFIG_LEDS_GPIO=y
+
+ #
+ # LED Triggers
+ #
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+ #
+ # InfiniBand support
+@@ -733,9 +853,53 @@
+ #
+ # Real Time Clock
+ #
+-# CONFIG_RTC_CLASS is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
+
+ #
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
++
++#
+ # DMA Engine support
+ #
+ # CONFIG_DMA_ENGINE is not set
+@@ -767,7 +931,8 @@
+ # CONFIG_OCFS2_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_ROMFS_FS is not set
+-# CONFIG_INOTIFY is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
+ # CONFIG_DNOTIFY is not set
+ # CONFIG_AUTOFS_FS is not set
+@@ -922,7 +1087,7 @@
+ CONFIG_ENABLE_MUST_CHECK=y
+ CONFIG_MAGIC_SYSRQ=y
+ # CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
++CONFIG_DEBUG_FS=y
+ # CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+Index: linux-2.6.22.1/arch/avr32/configs/atstk1002_defconfig
+===================================================================
+--- linux-2.6.22.1/arch/avr32/configs/atstk1002_defconfig (revision 1)
++++ linux-2.6.22.1/arch/avr32/configs/atstk1002_defconfig (arbetskopia)
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.22-rc5
+-# Sat Jun 23 15:32:08 2007
++# Linux kernel version: 2.6.22.atmel.2
++# Thu Jul 19 13:46:47 2007
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+@@ -80,10 +80,10 @@
+ #
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
++CONFIG_MODULE_FORCE_UNLOAD=y
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+-# CONFIG_KMOD is not set
++CONFIG_KMOD=y
+
+ #
+ # Block layer
+@@ -99,12 +99,12 @@
+ CONFIG_IOSCHED_NOOP=y
+ # CONFIG_IOSCHED_AS is not set
+ # CONFIG_IOSCHED_DEADLINE is not set
+-# CONFIG_IOSCHED_CFQ is not set
++CONFIG_IOSCHED_CFQ=y
+ # CONFIG_DEFAULT_AS is not set
+ # CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-CONFIG_DEFAULT_NOOP=y
+-CONFIG_DEFAULT_IOSCHED="noop"
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
+
+ #
+ # System Type and features
+@@ -117,6 +117,11 @@
+ CONFIG_BOARD_ATSTK1002=y
+ CONFIG_BOARD_ATSTK1000=y
+ # CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_ATSTK1002_CUSTOM is not set
++# CONFIG_BOARD_ATSTK1002_SPI1 is not set
++# CONFIG_BOARD_ATSTK1002_J2_LED is not set
++# CONFIG_BOARD_ATSTK1002_J2_LED8 is not set
++# CONFIG_BOARD_ATSTK1002_J2_RGB is not set
+ CONFIG_LOADER_U_BOOT=y
+
+ #
+@@ -125,6 +130,7 @@
+ # CONFIG_AP7000_32_BIT_SMC is not set
+ CONFIG_AP7000_16_BIT_SMC=y
+ # CONFIG_AP7000_8_BIT_SMC is not set
++CONFIG_GPIO_DEV=y
+ CONFIG_LOAD_ADDRESS=0x10000000
+ CONFIG_ENTRY_ADDRESS=0x90000000
+ CONFIG_PHYS_OFFSET=0x10000000
+@@ -148,6 +154,7 @@
+ # CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=0
+ # CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_DW_DMAC=y
+ # CONFIG_HZ_100 is not set
+ CONFIG_HZ_250=y
+ # CONFIG_HZ_300 is not set
+@@ -156,6 +163,27 @@
+ CONFIG_CMDLINE=""
+
+ #
++# Power managment options
++#
++
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++CONFIG_CPU_FREQ_STAT=m
++# CONFIG_CPU_FREQ_STAT_DETAILS is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
++
++#
+ # Bus options
+ #
+ # CONFIG_ARCH_SUPPORTS_MSI is not set
+@@ -327,6 +355,8 @@
+ #
+ # Self-contained MTD device drivers
+ #
++CONFIG_MTD_DATAFLASH=m
++# CONFIG_MTD_M25P80 is not set
+ # CONFIG_MTD_SLRAM is not set
+ # CONFIG_MTD_PHRAM is not set
+ # CONFIG_MTD_MTDRAM is not set
+@@ -373,7 +403,7 @@
+ #
+ # Misc devices
+ #
+-# CONFIG_BLINK is not set
++CONFIG_ATMEL_SSC=m
+ # CONFIG_IDE is not set
+
+ #
+@@ -397,13 +427,26 @@
+ # CONFIG_BONDING is not set
+ # CONFIG_EQUALIZER is not set
+ CONFIG_TUN=m
+-# CONFIG_PHYLIB is not set
++CONFIG_PHYLIB=y
+
+ #
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++CONFIG_LXT_PHY=y
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_FIXED_PHY is not set
++
++#
+ # Ethernet (10 or 100Mbit)
+ #
+ CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
++# CONFIG_MII is not set
+ CONFIG_MACB=y
+ # CONFIG_NETDEV_1000 is not set
+ # CONFIG_NETDEV_10000 is not set
+@@ -443,9 +486,44 @@
+ #
+ # Input device support
+ #
+-# CONFIG_INPUT is not set
++CONFIG_INPUT=m
++# CONFIG_INPUT_FF_MEMLESS is not set
++CONFIG_INPUT_POLLDEV=m
+
+ #
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++CONFIG_MOUSE_GPIO=m
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
+ # Hardware I/O ports
+ #
+ # CONFIG_SERIO is not set
+@@ -477,7 +555,15 @@
+ # IPMI
+ #
+ # CONFIG_IPMI_HANDLER is not set
+-# CONFIG_WATCHDOG is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
++CONFIG_AT32AP700X_WDT_TIMEOUT=2
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_RTC is not set
+ # CONFIG_GEN_RTC is not set
+@@ -488,15 +574,63 @@
+ # TPM devices
+ #
+ # CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
+
+ #
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_ATMELTWI=m
++CONFIG_I2C_ATMELTWI_BAUDRATE=100000
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
+ # SPI support
+ #
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
+
+ #
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++CONFIG_SPI_SPIDEV=m
++
++#
+ # Dallas's 1-wire bus
+ #
+ # CONFIG_W1 is not set
+@@ -517,21 +651,93 @@
+ #
+ # Graphics support
+ #
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_LCD_LTV350QV=y
++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+
+ #
+ # Display device support
+ #
+ # CONFIG_DISPLAY_SUPPORT is not set
+ # CONFIG_VGASTATE is not set
+-# CONFIG_FB is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
+
+ #
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_LOGO is not set
++
++#
+ # Sound
+ #
+-# CONFIG_SOUND is not set
++CONFIG_SOUND=m
+
+ #
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++# CONFIG_SND_SUPPORT_OLD_API is not set
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++
++#
++# Generic devices
++#
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++
++#
++# SPI devices
++#
++CONFIG_SND_AT73C213=m
++CONFIG_SND_AT73C213_TARGET_BITRATE=48000
++
++#
++# System on Chip audio support
++#
++# CONFIG_SND_SOC is not set
++
++#
++# Open Sound System
++#
++# CONFIG_SOUND_PRIME is not set
++
++#
++# HID Devices
++#
++# CONFIG_HID is not set
++
++#
+ # USB support
+ #
+ # CONFIG_USB_ARCH_HAS_HCD is not set
+@@ -545,21 +751,59 @@
+ #
+ # USB Gadget Support
+ #
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
+
+ #
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_ATMELMCI=y
++
++#
+ # LED devices
+ #
+-# CONFIG_NEW_LEDS is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=m
+
+ #
+ # LED drivers
+ #
++CONFIG_LEDS_GPIO=m
+
+ #
+ # LED Triggers
+ #
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=m
++CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+
+ #
+ # InfiniBand support
+@@ -572,9 +816,52 @@
+ #
+ # Real Time Clock
+ #
+-# CONFIG_RTC_CLASS is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++# CONFIG_RTC_HCTOSYS is not set
++# CONFIG_RTC_DEBUG is not set
+
+ #
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
++
++#
+ # DMA Engine support
+ #
+ # CONFIG_DMA_ENGINE is not set
+@@ -590,11 +877,14 @@
+ #
+ # File systems
+ #
+-CONFIG_EXT2_FS=m
++CONFIG_EXT2_FS=y
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+-# CONFIG_EXT3_FS is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
+ # CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+@@ -609,7 +899,7 @@
+ # CONFIG_DNOTIFY is not set
+ # CONFIG_AUTOFS_FS is not set
+ # CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
++CONFIG_FUSE_FS=m
+
+ #
+ # CD-ROM/DVD Filesystems
+@@ -638,7 +928,7 @@
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+ CONFIG_RAMFS=y
+-CONFIG_CONFIGFS_FS=m
++CONFIG_CONFIGFS_FS=y
+
+ #
+ # Miscellaneous filesystems
+@@ -683,8 +973,14 @@
+ # CONFIG_SUNRPC_BIND34 is not set
+ # CONFIG_RPCSEC_GSS_KRB5 is not set
+ # CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
++CONFIG_SMB_FS=m
++# CONFIG_SMB_NLS_DEFAULT is not set
++CONFIG_CIFS=m
++# CONFIG_CIFS_STATS is not set
++# CONFIG_CIFS_WEAK_PW_HASH is not set
++# CONFIG_CIFS_XATTR is not set
++# CONFIG_CIFS_DEBUG2 is not set
++# CONFIG_CIFS_EXPERIMENTAL is not set
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
+ # CONFIG_AFS_FS is not set
+Index: linux-2.6.22.1/arch/avr32/mm/dma-coherent.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/mm/dma-coherent.c (revision 1)
++++ linux-2.6.22.1/arch/avr32/mm/dma-coherent.c (arbetskopia)
+@@ -41,6 +41,13 @@
struct page *page, *free, *end;
int order;
@@ -4720,59 +11993,546 @@ index 099212d..26f29c6 100644
size = PAGE_ALIGN(size);
order = get_order(size);
-diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
-index 53f5538..520afb8 100644
---- a/drivers/char/watchdog/Kconfig
-+++ b/drivers/char/watchdog/Kconfig
-@@ -187,6 +187,26 @@ config PNX4008_WATCHDOG
+Index: linux-2.6.22.1/arch/avr32/boards/atngw100/Kconfig
+===================================================================
+--- linux-2.6.22.1/arch/avr32/boards/atngw100/Kconfig (revision 0)
++++ linux-2.6.22.1/arch/avr32/boards/atngw100/Kconfig (revision 0)
+@@ -0,0 +1,12 @@
++# NGW100 customization
++
++config BOARD_ATNGW100_I2C_GPIO
++ bool "Use GPIO for i2c instead of built-in TWI module"
++ help
++ The driver for the built-in TWI module has been plagued by
++ various problems, while the i2c-gpio driver is based on the
++ trusty old i2c-algo-bit bitbanging engine, making it work
++ on pretty much any setup.
++
++ Choose 'Y' here if you're having i2c-related problems and
++ want to rule out the i2c bus driver.
+Index: linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c (revision 1)
++++ linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c (arbetskopia)
+@@ -9,10 +9,12 @@
+ */
+ #include <linux/clk.h>
+ #include <linux/etherdevice.h>
++#include <linux/i2c-gpio.h>
+ #include <linux/init.h>
+ #include <linux/linkage.h>
+ #include <linux/platform_device.h>
+ #include <linux/types.h>
++#include <linux/leds.h>
+ #include <linux/spi/spi.h>
+
+ #include <asm/io.h>
+@@ -21,6 +23,7 @@
+ #include <asm/arch/at32ap7000.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/init.h>
++#include <asm/arch/portmux.h>
- Say N if you are unsure.
+ /* Initialized by bootloader-specific startup code. */
+ struct tag *bootloader_tags __initdata;
+@@ -39,6 +42,11 @@
+ },
+ };
-+# AVR32 Architecture
++static struct mci_platform_data __initdata mci0_data = {
++ .detect_pin = GPIO_PIN_PC(25),
++ .wp_pin = GPIO_PIN_PE(0),
++};
+
-+config AT32AP700X_WDT
-+ tristate "AT32AP700x watchdog"
-+ depends on WATCHDOG && CPU_AT32AP7000
+ /*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+@@ -100,8 +108,46 @@
+ at32_setup_serial_console(0);
+ }
+
++static const struct gpio_led ngw_leds[] = {
++ { .name = "sys", .gpio = GPIO_PIN_PA(16), .active_low = 1,
++ .default_trigger = "heartbeat",
++ },
++ { .name = "a", .gpio = GPIO_PIN_PA(19), .active_low = 1, },
++ { .name = "b", .gpio = GPIO_PIN_PE(19), .active_low = 1, },
++};
++
++static const struct gpio_led_platform_data ngw_led_data = {
++ .num_leds = ARRAY_SIZE(ngw_leds),
++ .leds = (void *) ngw_leds,
++};
++
++static struct platform_device ngw_gpio_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = (void *) &ngw_led_data,
++ }
++};
++
++#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
++static struct i2c_gpio_platform_data i2c_gpio_data = {
++ .sda_pin = GPIO_PIN_PA(6),
++ .scl_pin = GPIO_PIN_PA(7),
++};
++
++static struct platform_device i2c_gpio_device = {
++ .name = "i2c-gpio",
++ .id = 0,
++ .dev = {
++ .platform_data = &i2c_gpio_data,
++ },
++};
++#endif
++
+ static int __init atngw100_init(void)
+ {
++ unsigned i;
++
+ /*
+ * ATNGW100 uses 16-bit SDRAM interface, so we don't need to
+ * reserve any pins for it.
+@@ -115,7 +161,23 @@
+ set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
+
+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++ at32_add_device_mci(0, &mci0_data);
++ at32_add_device_usba(0, NULL);
+
++ for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
++ at32_select_gpio(ngw_leds[i].gpio,
++ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
++ }
++ platform_device_register(&ngw_gpio_leds);
++
++#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
++ at32_select_gpio(i2c_gpio_data.sda_pin, 0);
++ at32_select_gpio(i2c_gpio_data.scl_pin, 0);
++ platform_device_register(&i2c_gpio_device);
++#else
++ at32_add_device_twi(0);
++#endif
++
+ return 0;
+ }
+ postcore_initcall(atngw100_init);
+Index: linux-2.6.22.1/arch/avr32/boards/atstk1000/Kconfig
+===================================================================
+--- linux-2.6.22.1/arch/avr32/boards/atstk1000/Kconfig (revision 0)
++++ linux-2.6.22.1/arch/avr32/boards/atstk1000/Kconfig (revision 0)
+@@ -0,0 +1,95 @@
++# STK1000 customization
++
++if BOARD_ATSTK1002
++
++config BOARD_ATSTK1002_CUSTOM
++ bool "Non-default STK-1002 jumper settings"
+ help
-+ Watchdog timer embedded into AT32AP700x devices. This will reboot
-+ your system when the timeout is reached.
++ You will normally leave the jumpers on the CPU card at their
++ default settings. If you need to use certain peripherals,
++ you will need to change some of those jumpers.
+
-+config AT32AP700X_WDT_TIMEOUT
-+ int "Timeout value for AT32AP700x watchdog"
-+ depends on AT32AP700X_WDT
-+ default "2"
-+ range 1 2
++if BOARD_ATSTK1002_CUSTOM
++
++config BOARD_ATSTK1002_SW1_CUSTOM
++ bool "SW1: use SSC1 (not SPI0)"
+ help
-+ Sets the timeout value for the watchdog in AT32AP700x devices.
-+ Limited by hardware to be 1 or 2 seconds.
++ This also prevents using the external DAC as an audio interface,
++ and means you can't initialize the on-board QVGA display.
+
-+ Set to 2 seconds by default.
++config BOARD_ATSTK1002_SW2_CUSTOM
++ bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
++ help
++ If you change this you'll want an updated boot loader putting
++ the console on UART-C not UART-A.
+
- # X86 (i386 + ia64 + x86_64) Architecture
++config BOARD_ATSTK1002_SW3_CUSTOM
++ bool "SW3: use TIMER1 (not SSC0 and GCLK)"
++ help
++ This also prevents using the external DAC as an audio interface.
++
++config BOARD_ATSTK1002_SW4_CUSTOM
++ bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
++ help
++ To use the camera interface you'll need a custom card (on the
++ PCI-format connector) connect a video sensor.
++
++config BOARD_ATSTK1002_SW5_CUSTOM
++ bool "SW5: use MACB1 (not LCDC)"
++
++config BOARD_ATSTK1002_SW6_CUSTOM
++ bool "SW6: more GPIOs (not MACB0)"
++
++endif # custom
++
++config BOARD_ATSTK1002_SPI1
++ bool "Configure SPI1 controller"
++ depends on !BOARD_ATSTK1002_SW4_CUSTOM
++ help
++ All the signals for the second SPI controller are available on
++ GPIO lines and accessed through the J1 jumper block. Say "y"
++ here to configure that SPI controller.
++
++config BOARD_ATSTK1002_GPIO_MOUSE
++ bool "Configure gpio_mouse on GPIO J1 header"
++ depends on !BOARD_ATSTK1002_SW4_CUSTOM
++ help
++ Enable gpio_mouse board configuration on GPIO 0 to 7. Connecting a
++ 10-pin flat cable from J1 (GPIO) to J25 (SWITCH) will let a user give
++ mouse inputs using the the switches SW0 to SW7.
++
++ SW0: right
++ SW1: down
++ SW2: up
++ SW3: left
++ SW5: right button
++ SW6: middle button
++ SW7: left button
++
++config BOARD_ATSTK1002_J2_LED
++ bool
++ default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
++
++choice
++ prompt "LEDs connected to J2:"
++ depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM
++ optional
++ help
++ Select this if you have jumpered the J2 jumper block to the
++ LED0..LED7 amber leds, or to the RGB leds, using a ten-pin
++ IDC cable. A default "heartbeat" trigger is provided, but
++ you can of course override this.
++
++config BOARD_ATSTK1002_J2_LED8
++ bool "LED0..LED7"
++ help
++ Select this if J2 is jumpered to LED0..LED7 amber leds.
++
++config BOARD_ATSTK1002_J2_RGB
++ bool "RGB leds"
++ help
++ Select this if J2 is jumpered to the RGB leds.
++
++endchoice
++
++endif # stk 1002
+Index: linux-2.6.22.1/arch/avr32/boards/atstk1000/atstk1002.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/boards/atstk1000/atstk1002.c (revision 1)
++++ linux-2.6.22.1/arch/avr32/boards/atstk1000/atstk1002.c (arbetskopia)
+@@ -11,10 +11,13 @@
+ #include <linux/etherdevice.h>
+ #include <linux/init.h>
+ #include <linux/kernel.h>
++#include <linux/leds.h>
+ #include <linux/platform_device.h>
+ #include <linux/string.h>
+ #include <linux/types.h>
+ #include <linux/spi/spi.h>
++#include <linux/spi/at73c213.h>
++#include <linux/gpio_mouse.h>
- config ACQUIRE_WDT
-diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile
-index d90f649..3907ec0 100644
---- a/drivers/char/watchdog/Makefile
-+++ b/drivers/char/watchdog/Makefile
-@@ -36,6 +36,9 @@ obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
- obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
- obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
+ #include <video/atmel_lcdc.h>
-+# AVR32 Architecture
-+obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
+@@ -27,17 +30,48 @@
+
+ #include "atstk1000.h"
+
+-#define SW2_DEFAULT /* MMCI and UART_A available */
+
+ struct eth_addr {
+ u8 addr[6];
+ };
+
+ static struct eth_addr __initdata hw_addr[2];
+-static struct eth_platform_data __initdata eth_data[2];
++static struct eth_platform_data __initdata eth_data[2] = {
++ {
++ /*
++ * The MDIO pullups on STK1000 are a bit too weak for
++ * the autodetection to work properly, so we have to
++ * mask out everything but the correct address.
++ */
++ .phy_mask = ~(1U << 16),
++ },
++ {
++ .phy_mask = ~(1U << 17),
++ },
++};
+
++#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++static struct at73c213_board_info at73c213_data = {
++ .ssc_id = 0,
++ .shortname = "AVR32 STK1000 external DAC",
++};
++#endif
++#endif
+
- # X86 (i386 + ia64 + x86_64) Architecture
- obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
- obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
-diff --git a/drivers/char/watchdog/at32ap700x_wdt.c b/drivers/char/watchdog/at32ap700x_wdt.c
-new file mode 100644
-index 0000000..9b598d9
---- /dev/null
-+++ b/drivers/char/watchdog/at32ap700x_wdt.c
-@@ -0,0 +1,325 @@
++#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
+ static struct spi_board_info spi0_board_info[] __initdata = {
++#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
+ {
++ /* AT73C213 */
++ .modalias = "at73c213",
++ .max_speed_hz = 200000,
++ .chip_select = 0,
++ .mode = SPI_MODE_1,
++ .platform_data = &at73c213_data,
++ },
++#endif
++ {
+ /* QVGA display */
+ .modalias = "ltv350qv",
+ .max_speed_hz = 16000000,
+@@ -45,7 +79,62 @@
+ .mode = SPI_MODE_3,
+ },
+ };
++#endif
+
++#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++static struct spi_board_info spi1_board_info[] __initdata = { {
++ /* patch in custom entries here */
++} };
++#endif
++
++static struct mci_platform_data __initdata mci0_data = {
++ .detect_pin = GPIO_PIN_NONE,
++ .wp_pin = GPIO_PIN_NONE,
++};
++
++#ifdef CONFIG_BOARD_ATSTK1002_GPIO_MOUSE
++static struct gpio_mouse_platform_data gpio_mouse0_data = {
++ .polarity = GPIO_MOUSE_POLARITY_ACT_LOW,
++ {
++ {
++ .up = GPIO_PIN_PB(2),
++ .down = GPIO_PIN_PB(1),
++ .left = GPIO_PIN_PB(3),
++ .right = GPIO_PIN_PB(0),
++ .bleft = GPIO_PIN_PB(7),
++ .bmiddle = GPIO_PIN_PB(6),
++ .bright = GPIO_PIN_PB(5),
++ },
++ },
++ .scan_ms = 10,
++};
++
++static struct platform_device gpio_mouse0_device = {
++ .name = "gpio_mouse",
++ .id = 0,
++ .dev = {
++ .platform_data = &gpio_mouse0_data,
++ },
++};
++
++static void __init add_device_gpio_mouse0(void)
++{
++ struct platform_device *pdev = &gpio_mouse0_device;
++ struct gpio_mouse_platform_data *data = pdev->dev.platform_data;
++
++ at32_select_gpio(data->up, 0);
++ at32_select_gpio(data->down, 0);
++ at32_select_gpio(data->left, 0);
++ at32_select_gpio(data->right, 0);
++
++ at32_select_gpio(data->bleft, 0);
++ at32_select_gpio(data->bmiddle, 0);
++ at32_select_gpio(data->bright, 0);
++
++ platform_device_register(pdev);
++}
++#endif
++
+ /*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+@@ -101,12 +190,103 @@
+ clk_put(pclk);
+ }
+
++#ifdef CONFIG_BOARD_ATSTK1002_J2_LED
++
++static struct gpio_led stk_j2_led[] = {
++#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8
++#define LEDSTRING "J2 jumpered to LED8"
++ { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
++ { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
++ { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
++ { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
++ { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
++ { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
++ { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
++ { .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
++ .default_trigger = "heartbeat", },
++#else /* RGB */
++#define LEDSTRING "J2 jumpered to RGB LEDs"
++ { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), },
++ { .name = "g1:green", .gpio = GPIO_PIN_PB(10), },
++ { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), },
++
++ { .name = "r2:red", .gpio = GPIO_PIN_PB( 9),
++ .default_trigger = "heartbeat", },
++ { .name = "g2:green", .gpio = GPIO_PIN_PB(13), },
++ { .name = "b2:blue", .gpio = GPIO_PIN_PB(15),
++ .default_trigger = "heartbeat", },
++ /* PB16, PB30 unused */
++#endif
++};
++
++static struct gpio_led_platform_data stk_j2_led_data = {
++ .num_leds = ARRAY_SIZE(stk_j2_led),
++ .leds = stk_j2_led,
++};
++
++static struct platform_device stk_j2_led_dev = {
++ .name = "leds-gpio",
++ .id = 2, /* gpio block J2 */
++ .dev = {
++ .platform_data = &stk_j2_led_data,
++ },
++};
++
++static void setup_j2_leds(void)
++{
++ unsigned i;
++
++ for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++)
++ at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
++
++ printk("STK1002: " LEDSTRING "\n");
++ platform_device_register(&stk_j2_led_dev);
++}
++
++#else
++static void setup_j2_leds(void)
++{
++}
++#endif
++
++#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++static void __init at73c213_set_clk(struct at73c213_board_info *info)
++{
++ struct clk *gclk;
++ struct clk *pll;
++
++ gclk = clk_get(NULL, "gclk0");
++ if (IS_ERR(gclk))
++ goto err_gclk;
++ pll = clk_get(NULL, "pll0");
++ if (IS_ERR(pll))
++ goto err_pll;
++
++ if (clk_set_parent(gclk, pll)) {
++ pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
++ goto err_set_clk;
++ }
++
++ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
++ info->dac_clk = gclk;
++
++err_set_clk:
++ clk_put(pll);
++err_pll:
++ clk_put(gclk);
++err_gclk:
++ return;
++}
++#endif
++#endif
++
+ void __init setup_board(void)
+ {
+-#ifdef SW2_DEFAULT
++#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
++ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
++#else
+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+-#else
+- at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
+ #endif
+ /* USART 2/unused: expansion connector */
+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
+@@ -140,19 +320,51 @@
+
+ at32_add_system_devices();
+
+-#ifdef SW2_DEFAULT
++#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
++ at32_add_device_usart(1);
++#else
+ at32_add_device_usart(0);
+-#else
+- at32_add_device_usart(1);
+ #endif
+ at32_add_device_usart(2);
+
++#ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
+ set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+-
+- at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++#endif
++#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
++ set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
++#else
+ at32_add_device_lcdc(0, &atstk1000_lcdc_data,
+ fbmem_start, fbmem_size);
++#endif
+
++#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++#endif
++#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
++#endif
++ at32_add_device_twi(0);
++#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
++ at32_add_device_mci(0, &mci0_data);
++#endif
++ at32_add_device_usba(0, NULL);
++ at32_add_device_abdac(0);
++#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++ at32_add_device_ssc(0, ATMEL_SSC_TX);
++#endif
++
++ setup_j2_leds();
++
++#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++ at73c213_set_clk(&at73c213_data);
++#endif
++#endif
++
++#ifdef CONFIG_BOARD_ATSTK1002_GPIO_MOUSE
++ add_device_gpio_mouse0();
++#endif
++
+ return 0;
+ }
+ postcore_initcall(atstk1002_init);
+Index: linux-2.6.22.1/arch/avr32/Makefile
+===================================================================
+--- linux-2.6.22.1/arch/avr32/Makefile (revision 1)
++++ linux-2.6.22.1/arch/avr32/Makefile (arbetskopia)
+@@ -31,6 +31,7 @@
+ core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/
+ core-y += arch/avr32/kernel/
+ core-y += arch/avr32/mm/
++drivers-y += arch/avr32/drivers/
+ libs-y += arch/avr32/lib/
+
+ archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
+Index: linux-2.6.22.1/arch/avr32/drivers/dw-dmac.h
+===================================================================
+--- linux-2.6.22.1/arch/avr32/drivers/dw-dmac.h (revision 0)
++++ linux-2.6.22.1/arch/avr32/drivers/dw-dmac.h (revision 0)
+@@ -0,0 +1,42 @@
+/*
-+ * Watchdog driver for Atmel AT32AP700X devices
++ * Driver for the Synopsys DesignWare DMA Controller
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
@@ -4780,882 +12540,2367 @@ index 0000000..9b598d9
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
++#ifndef __AVR32_DW_DMAC_H__
++#define __AVR32_DW_DMAC_H__
++
++#define DW_DMAC_CFG 0x398
++#define DW_DMAC_CH_EN 0x3a0
++
++#define DW_DMAC_STATUS_XFER 0x2e8
++#define DW_DMAC_STATUS_BLOCK 0x2f0
++#define DW_DMAC_STATUS_ERROR 0x308
++
++#define DW_DMAC_MASK_XFER 0x310
++#define DW_DMAC_MASK_BLOCK 0x318
++#define DW_DMAC_MASK_ERROR 0x330
++
++#define DW_DMAC_CLEAR_XFER 0x338
++#define DW_DMAC_CLEAR_BLOCK 0x340
++#define DW_DMAC_CLEAR_ERROR 0x358
++
++#define DW_DMAC_STATUS_INT 0x360
+
++#define DW_DMAC_CHAN_SAR 0x000
++#define DW_DMAC_CHAN_DAR 0x008
++#define DW_DMAC_CHAN_LLP 0x010
++#define DW_DMAC_CHAN_CTL 0x018
++#define DW_DMAC_CHAN_SSTAT 0x020
++#define DW_DMAC_CHAN_DSTAT 0x028
++#define DW_DMAC_CHAN_SSTATAR 0x030
++#define DW_DMAC_CHAN_DSTATAR 0x038
++#define DW_DMAC_CHAN_CFG 0x040
++#define DW_DMAC_CHAN_SGR 0x048
++#define DW_DMAC_CHAN_DSR 0x050
++
++#endif /* __AVR32_DW_DMAC_H__ */
+Index: linux-2.6.22.1/arch/avr32/drivers/Makefile
+===================================================================
+--- linux-2.6.22.1/arch/avr32/drivers/Makefile (revision 0)
++++ linux-2.6.22.1/arch/avr32/drivers/Makefile (revision 0)
+@@ -0,0 +1 @@
++obj-$(CONFIG_DW_DMAC) += dw-dmac.o
+Index: linux-2.6.22.1/arch/avr32/drivers/dw-dmac.c
+===================================================================
+--- linux-2.6.22.1/arch/avr32/drivers/dw-dmac.c (revision 0)
++++ linux-2.6.22.1/arch/avr32/drivers/dw-dmac.c (revision 0)
+@@ -0,0 +1,761 @@
++/*
++ * Driver for the Synopsys DesignWare DMA Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
+#include <linux/init.h>
-+#include <linux/kernel.h>
++#include <linux/interrupt.h>
+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/miscdevice.h>
-+#include <linux/fs.h>
+#include <linux/platform_device.h>
-+#include <linux/watchdog.h>
-+#include <linux/uaccess.h>
-+#include <linux/io.h>
+
-+#define TIMEOUT_MIN 1
-+#define TIMEOUT_DEFAULT CONFIG_AT32AP700X_WDT_TIMEOUT
-+#define TIMEOUT_MAX 2
++#include <asm/dma-controller.h>
++#include <asm/io.h>
+
-+/* Watchdog registers and write/read macro */
-+#define WDT_CTRL 0x00
-+#define WDT_CTRL_EN 0
-+#define WDT_CTRL_PSEL 8
-+#define WDT_CTRL_KEY 24
++#include "dw-dmac.h"
+
-+#define WDT_CLR 0x04
++#define DMAC_NR_CHANNELS 3
++#define DMAC_MAX_BLOCKSIZE 4095
+
-+#define WDT_BIT(name) (1 << WDT_##name)
-+#define WDT_BF(name,value) ((value) << WDT_##name)
++enum {
++ CH_STATE_FREE = 0,
++ CH_STATE_ALLOCATED,
++ CH_STATE_BUSY,
++};
+
-+#define wdt_readl(dev,reg) \
-+ __raw_readl((dev)->regs + WDT_##reg)
-+#define wdt_writel(dev,reg,value) \
-+ __raw_writel((value), (dev)->regs + WDT_##reg)
++struct dw_dma_lli {
++ dma_addr_t sar;
++ dma_addr_t dar;
++ dma_addr_t llp;
++ u32 ctllo;
++ u32 ctlhi;
++ u32 sstat;
++ u32 dstat;
++};
+
-+struct wdt_at32ap700x {
-+ void __iomem *regs;
-+ int timeout;
-+ int users;
-+ struct miscdevice miscdev;
++struct dw_dma_block {
++ struct dw_dma_lli *lli_vaddr;
++ dma_addr_t lli_dma_addr;
+};
+
-+static struct wdt_at32ap700x *wdt;
++struct dw_dma_channel {
++ unsigned int state;
++ int is_cyclic;
++ struct dma_request_sg *req_sg;
++ struct dma_request_cyclic *req_cyclic;
++ unsigned int nr_blocks;
++ int direction;
++ struct dw_dma_block *block;
++};
+
-+/*
-+ * Disable the watchdog.
-+ */
-+static void inline at32_wdt_stop(void)
-+{
-+ unsigned long psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f);
-+ wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55));
-+ wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa));
-+}
++struct dw_dma_controller {
++ spinlock_t lock;
++ void * __iomem regs;
++ struct dma_pool *lli_pool;
++ struct clk *hclk;
++ struct dma_controller dma;
++ struct dw_dma_channel channel[DMAC_NR_CHANNELS];
++};
++#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
+
-+/*
-+ * Enable and reset the watchdog.
-+ */
-+static void inline at32_wdt_start(void)
++#define dmac_writel_hi(dmac, reg, value) \
++ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_readl_hi(dmac, reg) \
++ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_writel_lo(dmac, reg, value) \
++ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
++#define dmac_readl_lo(dmac, reg) \
++ __raw_readl((dmac)->regs + DW_DMAC_##reg)
++#define dmac_chan_writel_hi(dmac, chan, reg, value) \
++ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
++ + DW_DMAC_CHAN_##reg + 4))
++#define dmac_chan_readl_hi(dmac, chan, reg) \
++ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
++#define dmac_chan_writel_lo(dmac, chan, reg, value) \
++ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define dmac_chan_readl_lo(dmac, chan, reg) \
++ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define set_channel_bit(dmac, reg, chan) \
++ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
++#define clear_channel_bit(dmac, reg, chan) \
++ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
++
++static int dmac_alloc_channel(struct dma_controller *_dmac)
+{
-+ /* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
-+ unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe;
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long flags;
++ int i;
+
-+ wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
-+ | WDT_BF(CTRL_PSEL, psel)
-+ | WDT_BF(CTRL_KEY, 0x55));
-+ wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
-+ | WDT_BF(CTRL_PSEL, psel)
-+ | WDT_BF(CTRL_KEY, 0xaa));
++ spin_lock_irqsave(&dmac->lock, flags);
++ for (i = 0; i < DMAC_NR_CHANNELS; i++)
++ if (dmac->channel[i].state == CH_STATE_FREE)
++ break;
++
++ if (i < DMAC_NR_CHANNELS) {
++ chan = &dmac->channel[i];
++ chan->state = CH_STATE_ALLOCATED;
++ } else {
++ i = -EBUSY;
++ }
++
++ spin_unlock_irqrestore(&dmac->lock, flags);
++
++ return i;
+}
+
-+/*
-+ * Pat the watchdog timer.
-+ */
-+static void inline at32_wdt_pat(void)
++static void dmac_release_channel(struct dma_controller *_dmac, int channel)
+{
-+ wdt_writel(wdt, CLR, 0x42);
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS
++ || dmac->channel[channel].state != CH_STATE_ALLOCATED);
++
++ dmac->channel[channel].state = CH_STATE_FREE;
+}
+
-+/*
-+ * Watchdog device is opened, and watchdog starts running.
-+ */
-+static int at32_wdt_open(struct inode *inode, struct file *file)
++static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
++ unsigned int nr_blocks)
+{
-+ if (test_and_set_bit(1, &wdt->users))
-+ return -EBUSY;
++ struct dw_dma_block *block;
++ void *p;
++ unsigned int i;
+
-+ at32_wdt_start();
-+ return nonseekable_open(inode, file);
++ block = kmalloc(nr_blocks * sizeof(*block),
++ GFP_KERNEL);
++ if (unlikely(!block))
++ return NULL;
++
++ for (i = 0; i < nr_blocks; i++) {
++ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
++ &block[i].lli_dma_addr);
++ block[i].lli_vaddr = p;
++ if (unlikely(!p))
++ goto fail;
++ }
++
++ return block;
++
++fail:
++ for (i = 0; i < nr_blocks; i++) {
++ if (!block[i].lli_vaddr)
++ break;
++ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
++ block[i].lli_dma_addr);
++ }
++ kfree(block);
++ return NULL;
+}
+
-+/*
-+ * Close the watchdog device. If CONFIG_WATCHDOG_NOWAYOUT is _not_ defined then
-+ * the watchdog is also disabled.
-+ */
-+static int at32_wdt_close(struct inode *inode, struct file *file)
++static void cleanup_channel(struct dw_dma_controller *dmac,
++ struct dw_dma_channel *chan)
+{
-+#ifndef CONFIG_WATCHDOG_NOWAYOUT
-+ at32_wdt_stop();
-+#endif
-+ clear_bit(1, &wdt->users);
-+ return 0;
++ unsigned int i;
++
++ if (chan->nr_blocks > 1) {
++ for (i = 0; i < chan->nr_blocks; i++)
++ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
++ chan->block[i].lli_dma_addr);
++ kfree(chan->block);
++ }
++
++ chan->state = CH_STATE_ALLOCATED;
+}
+
-+/*
-+ * Change the watchdog time interval.
-+ */
-+static int at32_wdt_settimeout(int time)
++static int dmac_prepare_request_sg(struct dma_controller *_dmac,
++ struct dma_request_sg *req)
+{
-+ /*
-+ * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is
-+ * 2 ^ 16 allowing up to 2 seconds timeout.
-+ */
-+ if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX))
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long ctlhi, ctllo, cfghi, cfglo;
++ unsigned long block_size;
++ unsigned int nr_blocks;
++ int ret, i, direction;
++ unsigned long flags;
++
++ spin_lock_irqsave(&dmac->lock, flags);
++
++ ret = -EINVAL;
++ if (req->req.channel >= DMAC_NR_CHANNELS
++ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++ || req->block_size > DMAC_MAX_BLOCKSIZE) {
++ spin_unlock_irqrestore(&dmac->lock, flags);
+ return -EINVAL;
++ }
++
++ chan = &dmac->channel[req->req.channel];
++ chan->state = CH_STATE_BUSY;
++ chan->req_sg = req;
++ chan->is_cyclic = 0;
+
+ /*
-+ * Set new watchdog time. It will be used when at32_wdt_start() is
-+ * called.
++ * We have marked the channel as busy, so no need to keep the
++ * lock as long as we only touch the channel-specific
++ * registers
+ */
-+ wdt->timeout = time;
-+ return 0;
-+}
++ spin_unlock_irqrestore(&dmac->lock, flags);
+
-+static struct watchdog_info at32_wdt_info = {
-+ .identity = "at32ap700x watchdog",
-+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-+};
++ /*
++ * There may be limitations in the driver and/or the DMA
++ * controller that prevents us from sending a whole
++ * scatterlist item in one go. Taking this into account,
++ * calculate the number of block transfers we need to set up.
++ *
++ * FIXME: Let the peripheral driver know about the maximum
++ * block size we support. We really don't want to use a
++ * different block size than what was suggested by the
++ * peripheral.
++ *
++ * Each block will get its own Linked List Item (LLI) below.
++ */
++ block_size = req->block_size;
++ nr_blocks = req->nr_blocks;
++ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
++ block_size, nr_blocks, req->nr_sg);
+
-+/*
-+ * Handle commands from user-space.
-+ */
-+static int at32_wdt_ioctl(struct inode *inode, struct file *file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ int ret = -ENOTTY;
-+ int time;
-+ void __user *argp = (void __user *)arg;
-+ int __user *p = argp;
++ BUG_ON(nr_blocks == 0);
++ chan->nr_blocks = nr_blocks;
+
-+ switch (cmd) {
-+ case WDIOC_KEEPALIVE:
-+ at32_wdt_pat();
-+ ret = 0;
-+ break;
-+ case WDIOC_GETSUPPORT:
-+ ret = copy_to_user(argp, &at32_wdt_info,
-+ sizeof(at32_wdt_info)) ? -EFAULT : 0;
-+ break;
-+ case WDIOC_SETTIMEOUT:
-+ ret = get_user(time, p);
-+ if (ret)
-+ break;
-+ ret = at32_wdt_settimeout(time);
-+ if (ret)
-+ break;
-+ /* Enable new time value */
-+ at32_wdt_start();
-+ /* fall through */
-+ case WDIOC_GETTIMEOUT:
-+ ret = put_user(wdt->timeout, p);
-+ break;
-+ case WDIOC_GETSTATUS: /* fall through */
-+ case WDIOC_GETBOOTSTATUS:
-+ ret = put_user(0, p);
++ ret = -EINVAL;
++ cfglo = cfghi = 0;
++ switch (req->direction) {
++ case DMA_DIR_MEM_TO_PERIPH:
++ direction = DMA_TO_DEVICE;
++ cfghi = req->periph_id << (43 - 32);
+ break;
-+ case WDIOC_SETOPTIONS:
-+ ret = get_user(time, p);
-+ if (ret)
-+ break;
-+ if (time & WDIOS_DISABLECARD)
-+ at32_wdt_stop();
-+ if (time & WDIOS_ENABLECARD)
-+ at32_wdt_start();
-+ ret = 0;
++
++ case DMA_DIR_PERIPH_TO_MEM:
++ direction = DMA_FROM_DEVICE;
++ cfghi = req->periph_id << (39 - 32);
+ break;
++ default:
++ goto out_unclaim_channel;
++ }
++
++ chan->direction = direction;
++
++ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++
++ ctlhi = block_size >> req->width;
++ ctllo = ((req->direction << 20)
++ // | (1 << 14) | (1 << 11) // source/dest burst trans len
++ | (req->width << 4) | (req->width << 1)
++ | (1 << 0)); // interrupt enable
++
++ if (nr_blocks == 1) {
++ /* Only one block: No need to use block chaining */
++ if (direction == DMA_TO_DEVICE) {
++ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++ req->sg->dma_address);
++ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++ req->data_reg);
++ ctllo |= 2 << 7; // no dst increment
++ } else {
++ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++ req->data_reg);
++ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++ req->sg->dma_address);
++ ctllo |= 2 << 9; // no src increment
++ }
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
++ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
++ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
++ } else {
++ struct dw_dma_lli *lli, *lli_prev = NULL;
++ int j = 0, offset = 0;
++
++ ret = -ENOMEM;
++ chan->block = allocate_blocks(dmac, nr_blocks);
++ if (!chan->block)
++ goto out_unclaim_channel;
++
++ if (direction == DMA_TO_DEVICE)
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++ else
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++
++ /*
++ * Map scatterlist items to blocks. One scatterlist
++ * item may need more than one block for the reasons
++ * mentioned above.
++ */
++ for (i = 0; i < nr_blocks; i++) {
++ lli = chan->block[i].lli_vaddr;
++ if (lli_prev) {
++ lli_prev->llp = chan->block[i].lli_dma_addr;
++ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr,
++ lli_prev->sar, lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);
++ }
++ lli->llp = 0;
++ lli->ctllo = ctllo;
++ lli->ctlhi = ctlhi;
++ if (direction == DMA_TO_DEVICE) {
++ lli->sar = req->sg[j].dma_address + offset;
++ lli->dar = req->data_reg;
++ } else {
++ lli->sar = req->data_reg;
++ lli->dar = req->sg[j].dma_address + offset;
++ }
++ lli_prev = lli;
++
++ offset += block_size;
++ if (offset > req->sg[j].length) {
++ j++;
++ offset = 0;
++ }
++ }
++
++ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++ lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);
++
++ /*
++ * SAR, DAR and CTL are initialized from the LLI. We
++ * only have to enable the LLI bits in CTL.
++ */
++ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
++ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++ chan->block[0].lli_dma_addr);
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
+ }
+
++ set_channel_bit(dmac, MASK_XFER, req->req.channel);
++ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++ if (req->req.block_complete)
++ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++ else
++ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++
++ return 0;
++
++out_unclaim_channel:
++ chan->state = CH_STATE_ALLOCATED;
+ return ret;
+}
+
-+static ssize_t at32_wdt_write(struct file *file, const char *data, size_t len,
-+ loff_t *ppos)
++static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
++ struct dma_request_cyclic *req)
+{
-+ at32_wdt_pat();
-+ return len;
-+}
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long ctlhi, ctllo, cfghi, cfglo;
++ unsigned long block_size;
++ int ret, i, direction;
++ unsigned long flags;
+
-+static const struct file_operations at32_wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .ioctl = at32_wdt_ioctl,
-+ .open = at32_wdt_open,
-+ .release = at32_wdt_close,
-+ .write = at32_wdt_write,
-+};
++ spin_lock_irqsave(&dmac->lock, flags);
+
-+static int __init at32_wdt_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs;
-+ int ret;
++ block_size = (req->buffer_size/req->periods) >> req->width;
+
-+ if (wdt) {
-+ dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n");
-+ return -EBUSY;
++ ret = -EINVAL;
++ if (req->req.channel >= DMAC_NR_CHANNELS
++ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++ || (req->periods == 0)
++ || block_size > DMAC_MAX_BLOCKSIZE) {
++ spin_unlock_irqrestore(&dmac->lock, flags);
++ return -EINVAL;
+ }
+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_dbg(&pdev->dev, "missing mmio resource\n");
-+ return -ENXIO;
-+ }
++ chan = &dmac->channel[req->req.channel];
++ chan->state = CH_STATE_BUSY;
++ chan->is_cyclic = 1;
++ chan->req_cyclic = req;
+
-+ wdt = kzalloc(sizeof(struct wdt_at32ap700x), GFP_KERNEL);
-+ if (!wdt) {
-+ dev_dbg(&pdev->dev, "no memory for wdt structure\n");
-+ return -ENOMEM;
++ /*
++ * We have marked the channel as busy, so no need to keep the
++ * lock as long as we only touch the channel-specific
++ * registers
++ */
++ spin_unlock_irqrestore(&dmac->lock, flags);
++
++ /*
++ Setup
++ */
++ BUG_ON(req->buffer_size % req->periods);
++ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
++
++ chan->nr_blocks = req->periods;
++
++ ret = -EINVAL;
++ cfglo = cfghi = 0;
++ switch (req->direction) {
++ case DMA_DIR_MEM_TO_PERIPH:
++ direction = DMA_TO_DEVICE;
++ cfghi = req->periph_id << (43 - 32);
++ break;
++
++ case DMA_DIR_PERIPH_TO_MEM:
++ direction = DMA_FROM_DEVICE;
++ cfghi = req->periph_id << (39 - 32);
++ break;
++ default:
++ goto out_unclaim_channel;
+ }
+
-+ wdt->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!wdt->regs) {
++ chan->direction = direction;
++
++ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++
++ ctlhi = block_size;
++ ctllo = ((req->direction << 20)
++ | (req->width << 4) | (req->width << 1)
++ | (1 << 0)); // interrupt enable
++
++ {
++ struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
++
+ ret = -ENOMEM;
-+ dev_dbg(&pdev->dev, "could not map I/O memory\n");
-+ goto err_free;
-+ }
-+ wdt->users = 0;
-+ wdt->miscdev.minor = WATCHDOG_MINOR;
-+ wdt->miscdev.name = "watchdog";
-+ wdt->miscdev.fops = &at32_wdt_fops;
++ chan->block = allocate_blocks(dmac, req->periods);
++ if (!chan->block)
++ goto out_unclaim_channel;
+
-+ if (at32_wdt_settimeout(TIMEOUT_DEFAULT)) {
-+ at32_wdt_settimeout(TIMEOUT_MAX);
-+ dev_dbg(&pdev->dev,
-+ "default timeout invalid, set to %d sec.\n",
-+ TIMEOUT_MAX);
-+ }
++ if (direction == DMA_TO_DEVICE)
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++ else
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
+
-+ ret = misc_register(&wdt->miscdev);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
-+ goto err_iounmap;
++ /*
++ * Set up a linked list items where each period gets
++ * an item. The linked list item for the last period
++ * points back to the star of the buffer making a
++ * cyclic buffer.
++ */
++ for (i = 0; i < req->periods; i++) {
++ lli = chan->block[i].lli_vaddr;
++ if (lli_prev) {
++ lli_prev->llp = chan->block[i].lli_dma_addr;
++ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr,
++ lli_prev->sar, lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);*/
++ }
++ lli->llp = 0;
++ lli->ctllo = ctllo;
++ lli->ctlhi = ctlhi;
++ if (direction == DMA_TO_DEVICE) {
++ lli->sar = req->buffer_start + i*(block_size << req->width);
++ lli->dar = req->data_reg;
++ } else {
++ lli->sar = req->data_reg;
++ lli->dar = req->buffer_start + i*(block_size << req->width);
++ }
++ lli_prev = lli;
++ }
++ lli->llp = chan->block[0].lli_dma_addr;
++
++ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++ lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi); */
++
++ /*
++ * SAR, DAR and CTL are initialized from the LLI. We
++ * only have to enable the LLI bits in CTL.
++ */
++ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++ chan->block[0].lli_dma_addr);
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
+ }
+
-+ platform_set_drvdata(pdev, wdt);
-+ wdt->miscdev.parent = &pdev->dev;
-+ dev_info(&pdev->dev, "AT32AP700X WDT at 0x%p\n", wdt->regs);
++ clear_channel_bit(dmac, MASK_XFER, req->req.channel);
++ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++ if (req->req.block_complete)
++ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++ else
++ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
+
+ return 0;
+
-+err_iounmap:
-+ iounmap(wdt->regs);
-+err_free:
-+ kfree(wdt);
-+ wdt = NULL;
++out_unclaim_channel:
++ chan->state = CH_STATE_ALLOCATED;
+ return ret;
+}
+
-+static int __exit at32_wdt_remove(struct platform_device *pdev)
++static int dmac_start_request(struct dma_controller *_dmac,
++ unsigned int channel)
+{
-+ if (wdt && platform_get_drvdata(pdev) == wdt) {
-+ misc_deregister(&wdt->miscdev);
-+ iounmap(wdt->regs);
-+ kfree(wdt);
-+ wdt = NULL;
-+ platform_set_drvdata(pdev, NULL);
-+ }
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ set_channel_bit(dmac, CH_EN, channel);
+
+ return 0;
+}
+
-+static void at32_wdt_shutdown(struct platform_device *pdev)
++static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
++ unsigned int channel)
+{
-+ at32_wdt_stop();
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ dma_addr_t current_pos;
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ chan = &dmac->channel[channel];
++
++ switch (chan->direction) {
++ case DMA_TO_DEVICE:
++ current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
++ break;
++ case DMA_FROM_DEVICE:
++ current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
++ break;
++ default:
++ return 0;
++ }
++
++
++ if (!current_pos) {
++ if (chan->is_cyclic) {
++ current_pos = chan->req_cyclic->buffer_start;
++ } else {
++ current_pos = chan->req_sg->sg->dma_address;
++ }
++ }
++
++ return current_pos;
+}
+
-+#ifdef CONFIG_PM
-+static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message)
++
++static int dmac_stop_request(struct dma_controller *_dmac,
++ unsigned int channel)
+{
-+ at32_wdt_stop();
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ chan = &dmac->channel[channel];
++ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
++ chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
++ dmac_chan_readl_lo(dmac, channel, DAR),
++ dmac_chan_readl_lo(dmac, channel, LLP),
++ dmac_chan_readl_hi(dmac, channel, CTL),
++ dmac_chan_readl_lo(dmac, channel, CTL));
++
++ if (chan->state == CH_STATE_BUSY) {
++ clear_channel_bit(dmac, CH_EN, channel);
++ cleanup_channel(dmac, &dmac->channel[channel]);
++ }
++
+ return 0;
+}
+
-+static int at32_wdt_resume(struct platform_device *pdev)
++
++static void dmac_block_complete(struct dw_dma_controller *dmac)
+{
-+ if (wdt->users)
-+ at32_wdt_start();
++ struct dw_dma_channel *chan;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_BLOCK);
++
++ while (status) {
++ struct dma_request *req;
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ if (chan->is_cyclic) {
++ BUG_ON(!chan->req_cyclic
++ || !chan->req_cyclic->req.block_complete);
++ req = &chan->req_cyclic->req;
++ } else {
++ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
++ req = &chan->req_sg->req;
++ }
++ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
++ req->block_complete(req);
++ status = dmac_readl_lo(dmac, STATUS_BLOCK);
++ }
++}
++
++static void dmac_xfer_complete(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ struct dma_request *req;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++
++ while (status) {
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
++
++ req = &chan->req_sg->req;
++ BUG_ON(!req);
++ cleanup_channel(dmac, chan);
++ if (req->xfer_complete)
++ req->xfer_complete(req);
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++ }
++}
++
++static void dmac_error(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_ERROR);
++
++ while (status) {
++ struct dma_request *req;
++
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
++ clear_channel_bit(dmac, CH_EN, chanid);
++
++ if (chan->is_cyclic) {
++ BUG_ON(!chan->req_cyclic);
++ req = &chan->req_cyclic->req;
++ } else {
++ BUG_ON(!chan->req_sg);
++ req = &chan->req_sg->req;
++ }
++
++ cleanup_channel(dmac, chan);
++ if (req->error)
++ req->error(req);
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++ }
++}
++
++static irqreturn_t dmac_interrupt(int irq, void *dev_id)
++{
++ struct dw_dma_controller *dmac = dev_id;
++ unsigned long status;
++ int ret = IRQ_NONE;
++
++ spin_lock(&dmac->lock);
++
++ status = dmac_readl_lo(dmac, STATUS_INT);
++
++ while (status) {
++ ret = IRQ_HANDLED;
++ if (status & 0x10)
++ dmac_error(dmac);
++ if (status & 0x02)
++ dmac_block_complete(dmac);
++ if (status & 0x01)
++ dmac_xfer_complete(dmac);
++
++ status = dmac_readl_lo(dmac, STATUS_INT);
++ }
++
++ spin_unlock(&dmac->lock);
++ return ret;
++}
++
++static int __devinit dmac_probe(struct platform_device *pdev)
++{
++ struct dw_dma_controller *dmac;
++ struct resource *regs;
++ int ret;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++
++ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
++ if (!dmac)
++ return -ENOMEM;
++ memset(dmac, 0, sizeof(*dmac));
++
++ dmac->hclk = clk_get(&pdev->dev, "hclk");
++ if (IS_ERR(dmac->hclk)) {
++ ret = PTR_ERR(dmac->hclk);
++ goto out_free_dmac;
++ }
++ clk_enable(dmac->hclk);
++
++ ret = -ENOMEM;
++ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
++ sizeof(struct dw_dma_lli), 4, 0);
++ if (!dmac->lli_pool)
++ goto out_disable_clk;
++
++ spin_lock_init(&dmac->lock);
++ dmac->dma.dev = &pdev->dev;
++ dmac->dma.alloc_channel = dmac_alloc_channel;
++ dmac->dma.release_channel = dmac_release_channel;
++ dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
++ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
++ dmac->dma.start_request = dmac_start_request;
++ dmac->dma.stop_request = dmac_stop_request;
++ dmac->dma.get_current_pos = dmac_get_current_pos;
++
++ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!dmac->regs)
++ goto out_free_pool;
++
++ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
++ IRQF_SAMPLE_RANDOM, pdev->name, dmac);
++ if (ret)
++ goto out_unmap_regs;
++
++ /* Enable the DMA controller */
++ dmac_writel_lo(dmac, CFG, 1);
++
++ register_dma_controller(&dmac->dma);
++
++ printk(KERN_INFO
++ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
++ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
++
+ return 0;
++
++out_unmap_regs:
++ iounmap(dmac->regs);
++out_free_pool:
++ dma_pool_destroy(dmac->lli_pool);
++out_disable_clk:
++ clk_disable(dmac->hclk);
++ clk_put(dmac->hclk);
++out_free_dmac:
++ kfree(dmac);
++ return ret;
+}
-+#else
-+#define at32_wdt_suspend NULL
-+#define at32_wdt_resume NULL
-+#endif
+
-+static struct platform_driver at32_wdt_driver = {
-+ .remove = __exit_p(at32_wdt_remove),
-+ .suspend = at32_wdt_suspend,
-+ .resume = at32_wdt_resume,
++static struct platform_driver dmac_driver = {
++ .probe = dmac_probe,
+ .driver = {
-+ .name = "at32_wdt",
-+ .owner = THIS_MODULE,
++ .name = "dmaca",
+ },
-+ .shutdown = at32_wdt_shutdown,
+};
+
-+static int __init at32_wdt_init(void)
++static int __init dmac_init(void)
+{
-+ return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe);
++ return platform_driver_register(&dmac_driver);
+}
-+module_init(at32_wdt_init);
++subsys_initcall(dmac_init);
+
-+static void __exit at32_wdt_exit(void)
++static void __exit dmac_exit(void)
+{
-+ platform_driver_unregister(&at32_wdt_driver);
++ platform_driver_unregister(&dmac_driver);
+}
-+module_exit(at32_wdt_exit);
++module_exit(dmac_exit);
+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X");
++MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
-index 838dc1c..80da12d 100644
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -4,6 +4,26 @@
+Index: linux-2.6.22.1/drivers/serial/atmel_serial.c
+===================================================================
+--- linux-2.6.22.1/drivers/serial/atmel_serial.c (revision 1)
++++ linux-2.6.22.1/drivers/serial/atmel_serial.c (arbetskopia)
+@@ -7,6 +7,8 @@
+ * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
++ * DMA support added by Chip Coldwell.
++ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+@@ -33,6 +35,7 @@
+ #include <linux/sysrq.h>
+ #include <linux/tty_flip.h>
+ #include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
+ #include <linux/atmel_pdc.h>
- menu "I2C Hardware Bus support"
+ #include <asm/io.h>
+@@ -47,6 +50,11 @@
-+config I2C_ATMELTWI
-+ tristate "Atmel TWI/I2C"
-+ depends on I2C
-+ help
-+ Atmel on-chip TWI controller. Say Y if you have an AT32 or
-+ AT91-based device and want to use its built-in TWI
-+ functionality. Atmel's TWI is compatible with Philips' I2C
-+ protocol. If in doubt, say NO
+ #include "atmel_serial.h"
+
++#define SUPPORT_PDC
++#define PDC_BUFFER_SIZE (L1_CACHE_BYTES << 3)
++#warning "Revisit"
++#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
+
-+config I2C_ATMELTWI_BAUDRATE
-+ prompt "Atmel TWI baudrate"
-+ depends on I2C_ATMELTWI
-+ int
-+ default 100000
-+ help
-+ Set the TWI/I2C baudrate. This will alter the default value. A
-+ different baudrate can be set by using a module parameter as well. If
-+ no parameter is provided when loading, this is the value that will be
-+ used.
+ #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+ #define SUPPORT_SYSRQ
+ #endif
+@@ -107,6 +115,13 @@
+ static int (*atmel_open_hook)(struct uart_port *);
+ static void (*atmel_close_hook)(struct uart_port *);
+
++struct atmel_dma_buffer {
++ unsigned char *buf;
++ dma_addr_t dma_addr;
++ size_t dma_size;
++ unsigned int ofs;
++};
+
- config I2C_ALI1535
- tristate "ALI 1535"
- depends on PCI
-diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
-index 14d1432..fd7c3b3 100644
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -52,6 +52,7 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
- obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
- obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
- obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
-+obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
+ /*
+ * We wrap our port structure around the generic uart_port.
+ */
+@@ -114,10 +129,21 @@
+ struct uart_port uart; /* uart */
+ struct clk *clk; /* uart clock */
+ unsigned short suspended; /* is port suspended? */
++ int break_active; /* break being received */
++
++ short use_dma_rx; /* enable PDC receiver */
++ short pdc_rx_idx; /* current PDC RX buffer */
++ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */
++
++ short use_dma_tx; /* enable PDC transmitter */
++ struct atmel_dma_buffer pdc_tx; /* PDC transmitter */
+ };
- ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
- EXTRA_CFLAGS += -DDEBUG
-diff --git a/drivers/i2c/busses/atmeltwi.h b/drivers/i2c/busses/atmeltwi.h
-new file mode 100644
-index 0000000..8502ea6
---- /dev/null
-+++ b/drivers/i2c/busses/atmeltwi.h
-@@ -0,0 +1,117 @@
+ static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
+
++#define PDC_RX_BUF(port) &(port)->pdc_rx[(port)->pdc_rx_idx]
++#define PDC_RX_SWITCH(port) (port)->pdc_rx_idx = !(port)->pdc_rx_idx
++
+ #ifdef SUPPORT_SYSRQ
+ static struct console atmel_console;
+ #endif
+@@ -205,7 +231,12 @@
+ {
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+
+- UART_PUT_IDR(port, ATMEL_US_TXRDY);
++ if (atmel_port->use_dma_tx) {
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
++ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++ }
++ else
++ UART_PUT_IDR(port, ATMEL_US_TXRDY);
+ }
+
+ /*
+@@ -215,7 +246,17 @@
+ {
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+
+- UART_PUT_IER(port, ATMEL_US_TXRDY);
++ if (atmel_port->use_dma_tx) {
++ if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
++ /* The transmitter is already running. Yes, we
++ really need this.*/
++ return;
++
++ UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */
++ }
++ else
++ UART_PUT_IER(port, ATMEL_US_TXRDY);
+ }
+
+ /*
+@@ -225,7 +266,12 @@
+ {
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+
+- UART_PUT_IDR(port, ATMEL_US_RXRDY);
++ if (atmel_port->use_dma_rx) {
++ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); /* disable PDC receive */
++ UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
++ }
++ else
++ UART_PUT_IDR(port, ATMEL_US_RXRDY);
+ }
+
+ /*
+@@ -248,10 +294,139 @@
+ }
+
+ /*
++ * Receive data via the PDC. A buffer has been fulled.
++ */
++static void atmel_pdc_endrx(struct uart_port *port)
++{
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++ struct tty_struct *tty = port->info->tty;
++ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
++ unsigned int count;
++
++ count = pdc->dma_size - pdc->ofs;
++ if (likely(count > 0)) {
++ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
++ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
++ tty_flip_buffer_push(tty);
++
++ port->icount.rx += count;
++ }
++
++ /* Set this buffer as the next receive buffer */
++ pdc->ofs = 0;
++ UART_PUT_RNPR(port, pdc->dma_addr);
++ UART_PUT_RNCR(port, pdc->dma_size);
++
++ /* Switch to next buffer */
++ PDC_RX_SWITCH(atmel_port); /* next PDC buffer */
++}
++
+/*
-+ * Register definitions for the Atmel Two-Wire Interface
++ * Receive data via the PDC. At least one byte was received, but the
++ * buffer was not full when the inter-character timeout expired.
+ */
++static void atmel_pdc_timeout(struct uart_port *port)
++{
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++ struct tty_struct *tty = port->info->tty;
++ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
++ /* unsigned */ int ofs, count;
+
-+#ifndef __ASM_AVR32_TWI_H__
-+#define __ASM_AVR32_TWI_H__
++ ofs = UART_GET_RPR(port) - pdc->dma_addr; /* current DMA adress */
++ count = ofs - pdc->ofs;
+
-+/* TWI register offsets */
-+#define TWI_CR 0x0000
-+#define TWI_MMR 0x0004
-+#define TWI_SMR 0x0008
-+#define TWI_IADR 0x000c
-+#define TWI_CWGR 0x0010
-+#define TWI_SR 0x0020
-+#define TWI_IER 0x0024
-+#define TWI_IDR 0x0028
-+#define TWI_IMR 0x002c
-+#define TWI_RHR 0x0030
-+#define TWI_THR 0x0034
++ if (likely(count > 0)) {
++ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
++ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
++ tty_flip_buffer_push(tty);
+
-+/* Bitfields in CR */
-+#define TWI_START_OFFSET 0
-+#define TWI_START_SIZE 1
-+#define TWI_STOP_OFFSET 1
-+#define TWI_STOP_SIZE 1
-+#define TWI_MSEN_OFFSET 2
-+#define TWI_MSEN_SIZE 1
-+#define TWI_MSDIS_OFFSET 3
-+#define TWI_MSDIS_SIZE 1
-+#define TWI_SVEN_OFFSET 4
-+#define TWI_SVEN_SIZE 1
-+#define TWI_SVDIS_OFFSET 5
-+#define TWI_SVDIS_SIZE 1
-+#define TWI_SWRST_OFFSET 7
-+#define TWI_SWRST_SIZE 1
++ pdc->ofs = ofs;
++ port->icount.rx += count;
++ }
+
-+/* Bitfields in MMR */
-+#define TWI_IADRSZ_OFFSET 8
-+#define TWI_IADRSZ_SIZE 2
-+#define TWI_MREAD_OFFSET 12
-+#define TWI_MREAD_SIZE 1
-+#define TWI_DADR_OFFSET 16
-+#define TWI_DADR_SIZE 7
++ /* reset the UART timeout */
++ UART_PUT_CR(port, ATMEL_US_STTTO);
++}
+
-+/* Bitfields in SMR */
-+#define TWI_SADR_OFFSET 16
-+#define TWI_SADR_SIZE 7
++/*
++ * Deal with parity, framing and overrun errors.
++ */
++static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
++{
++ /* clear error */
++ UART_PUT_CR(port, ATMEL_US_RSTSTA);
+
-+/* Bitfields in IADR */
-+#define TWI_IADR_OFFSET 0
-+#define TWI_IADR_SIZE 24
++ if (status & ATMEL_US_RXBRK) {
++ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */
++ port->icount.brk++;
++ }
++ if (status & ATMEL_US_PARE)
++ port->icount.parity++;
++ if (status & ATMEL_US_FRAME)
++ port->icount.frame++;
++ if (status & ATMEL_US_OVRE)
++ port->icount.overrun++;
++}
+
-+/* Bitfields in CWGR */
-+#define TWI_CLDIV_OFFSET 0
-+#define TWI_CLDIV_SIZE 8
-+#define TWI_CHDIV_OFFSET 8
-+#define TWI_CHDIV_SIZE 8
-+#define TWI_CKDIV_OFFSET 16
-+#define TWI_CKDIV_SIZE 3
++/*
++ * A transmission via the PDC is complete.
++ */
++static void atmel_pdc_endtx(struct uart_port *port)
++{
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++ struct circ_buf *xmit = &port->info->xmit;
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
+
-+/* Bitfields in SR */
-+#define TWI_TXCOMP_OFFSET 0
-+#define TWI_TXCOMP_SIZE 1
-+#define TWI_RXRDY_OFFSET 1
-+#define TWI_RXRDY_SIZE 1
-+#define TWI_TXRDY_OFFSET 2
-+#define TWI_TXRDY_SIZE 1
-+#define TWI_SVDIR_OFFSET 3
-+#define TWI_SVDIR_SIZE 1
-+#define TWI_SVACC_OFFSET 4
-+#define TWI_SVACC_SIZE 1
-+#define TWI_GCACC_OFFSET 5
-+#define TWI_GCACC_SIZE 1
-+#define TWI_OVRE_OFFSET 6
-+#define TWI_OVRE_SIZE 1
-+#define TWI_UNRE_OFFSET 7
-+#define TWI_UNRE_SIZE 1
-+#define TWI_NACK_OFFSET 8
-+#define TWI_NACK_SIZE 1
-+#define TWI_ARBLST_OFFSET 9
-+#define TWI_ARBLST_SIZE 1
++ xmit->tail += pdc->ofs;
++ if (xmit->tail >= SERIAL_XMIT_SIZE)
++ xmit->tail -= SERIAL_XMIT_SIZE;
+
-+/* Bitfields in RHR */
-+#define TWI_RXDATA_OFFSET 0
-+#define TWI_RXDATA_SIZE 8
++ port->icount.tx += pdc->ofs;
++ pdc->ofs = 0;
+
-+/* Bitfields in THR */
-+#define TWI_TXDATA_OFFSET 0
-+#define TWI_TXDATA_SIZE 8
++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
++ uart_write_wakeup(port);
++}
+
-+/* Constants for IADRSZ */
-+#define TWI_IADRSZ_NO_ADDR 0
-+#define TWI_IADRSZ_ONE_BYTE 1
-+#define TWI_IADRSZ_TWO_BYTES 2
-+#define TWI_IADRSZ_THREE_BYTES 3
++/*
++ * The PDC transmitter is idle, so either start the next transfer or
++ * disable the transmitter.
++ */
++static void atmel_pdc_txbufe(struct uart_port *port)
++{
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++ struct circ_buf *xmit = &port->info->xmit;
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++ int count;
+
-+/* Bit manipulation macros */
-+#define TWI_BIT(name) \
-+ (1 << TWI_##name##_OFFSET)
-+#define TWI_BF(name,value) \
-+ (((value) & ((1 << TWI_##name##_SIZE) - 1)) \
-+ << TWI_##name##_OFFSET)
-+#define TWI_BFEXT(name,value) \
-+ (((value) >> TWI_##name##_OFFSET) \
-+ & ((1 << TWI_##name##_SIZE) - 1))
-+#define TWI_BFINS(name,value,old) \
-+ (((old) & ~(((1 << TWI_##name##_SIZE) - 1) \
-+ << TWI_##name##_OFFSET)) \
-+ | TWI_BF(name,value))
++ if (!uart_circ_empty(xmit)) {
++ /* more to transmit - setup next transfer */
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
++ dma_sync_single_for_device(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
+
-+/* Register access macros */
-+#define twi_readl(port,reg) \
-+ __raw_readl((port)->regs + TWI_##reg)
-+#define twi_writel(port,reg,value) \
-+ __raw_writel((value), (port)->regs + TWI_##reg)
++ if (xmit->tail < xmit->head)
++ count = xmit->head - xmit->tail;
++ else
++ count = SERIAL_XMIT_SIZE - xmit->tail;
++ pdc->ofs = count;
++
++ UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
++ UART_PUT_TCR(port, count);
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */
++ }
++ else {
++ /* nothing left to transmit - disable the transmitter */
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
++ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++ }
++}
+
-+#endif /* __ASM_AVR32_TWI_H__ */
-diff --git a/drivers/i2c/busses/i2c-atmeltwi.c b/drivers/i2c/busses/i2c-atmeltwi.c
-new file mode 100644
-index 0000000..9a3f223
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-atmeltwi.c
-@@ -0,0 +1,383 @@
+/*
-+ * i2c Support for Atmel's Two-Wire Interface (TWI)
-+ *
-+ * Based on the work of Copyright (C) 2004 Rick Bronson
-+ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
-+ * Ported to AVR32 and heavily modified by Espen Krangnes
-+ * <ekrangnes at atmel.com>
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * Borrowed heavily from the original work by:
-+ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
+ * Characters received (called from interrupt handler)
+ */
+ static void atmel_rx_chars(struct uart_port *port)
+ {
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ struct tty_struct *tty = port->info->tty;
+ unsigned int status, ch, flg;
+
+@@ -267,13 +442,29 @@
+ * note that the error handling code is
+ * out of the main execution path
+ */
+- if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
++ if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
++ | ATMEL_US_OVRE | ATMEL_US_RXBRK)
++ || atmel_port->break_active)) {
+ UART_PUT_CR(port, ATMEL_US_RSTSTA); /* clear error */
+- if (status & ATMEL_US_RXBRK) {
++ if (status & ATMEL_US_RXBRK
++ && !atmel_port->break_active) {
+ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */
+ port->icount.brk++;
++ atmel_port->break_active = 1;
++ UART_PUT_IER(port, ATMEL_US_RXBRK);
+ if (uart_handle_break(port))
+ goto ignore_char;
++ } else {
++ /*
++ * This is either the end-of-break
++ * condition or we've received at
++ * least one character without RXBRK
++ * being set. In both cases, the next
++ * RXBRK will indicate start-of-break.
++ */
++ UART_PUT_IDR(port, ATMEL_US_RXBRK);
++ status &= ~ATMEL_US_RXBRK;
++ atmel_port->break_active = 0;
+ }
+ if (status & ATMEL_US_PARE)
+ port->icount.parity++;
+@@ -349,9 +540,27 @@
+ status = UART_GET_CSR(port);
+ pending = status & UART_GET_IMR(port);
+ while (pending) {
++ /* PDC receive */
++ if (pending & ATMEL_US_ENDRX)
++ atmel_pdc_endrx(port);
++ if (pending & ATMEL_US_TIMEOUT)
++ atmel_pdc_timeout(port);
++ if (atmel_port->use_dma_rx && pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | ATMEL_US_FRAME | ATMEL_US_PARE))
++ atmel_pdc_rxerr(port, pending);
++
+ /* Interrupt receive */
+ if (pending & ATMEL_US_RXRDY)
+ atmel_rx_chars(port);
++ else if (pending & ATMEL_US_RXBRK) {
++ /*
++ * End of break detected. If it came along
++ * with a character, atmel_rx_chars will
++ * handle it.
++ */
++ UART_PUT_CR(port, ATMEL_US_RSTSTA);
++ UART_PUT_IDR(port, ATMEL_US_RXBRK);
++ atmel_port->break_active = 0;
++ }
+
+ // TODO: All reads to CSR will clear these interrupts!
+ if (pending & ATMEL_US_RIIC) port->icount.rng++;
+@@ -363,6 +572,12 @@
+ if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
+ wake_up_interruptible(&port->info->delta_msr_wait);
+
++ /* PDC transmit */
++ if (pending & ATMEL_US_ENDTX)
++ atmel_pdc_endtx(port);
++ if (pending & ATMEL_US_TXBUFE)
++ atmel_pdc_txbufe(port);
++
+ /* Interrupt transmit */
+ if (pending & ATMEL_US_TXRDY)
+ atmel_tx_chars(port);
+@@ -401,6 +616,47 @@
+ }
+
+ /*
++ * Initialize DMA (if necessary)
++ */
++ if (atmel_port->use_dma_rx) {
++ int i;
++
++ for (i = 0; i < 2; i++) {
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
++
++ pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
++ if (pdc->buf == NULL) {
++ if (i != 0) {
++ dma_unmap_single(port->dev, atmel_port->pdc_rx[0].dma_addr, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
++ kfree(atmel_port->pdc_rx[0].buf);
++ }
++ free_irq(port->irq, port);
++ return -ENOMEM;
++ }
++ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
++ pdc->dma_size = PDC_BUFFER_SIZE;
++ pdc->ofs = 0;
++ }
++
++ atmel_port->pdc_rx_idx = 0;
++
++ UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
++ UART_PUT_RCR(port, PDC_BUFFER_SIZE);
++
++ UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
++ UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
++ }
++ if (atmel_port->use_dma_tx) {
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++ struct circ_buf *xmit = &port->info->xmit;
++
++ pdc->buf = xmit->buf;
++ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, SERIAL_XMIT_SIZE, DMA_TO_DEVICE);
++ pdc->dma_size = SERIAL_XMIT_SIZE;
++ pdc->ofs = 0;
++ }
++
++ /*
+ * If there is a specific "open" function (to register
+ * control line interrupts)
+ */
+@@ -418,8 +674,16 @@
+ UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
+ UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); /* enable xmit & rcvr */
+
+- UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
++ if (atmel_port->use_dma_rx) {
++ UART_PUT_RTOR(port, PDC_RX_TIMEOUT); /* set UART timeout */
++ UART_PUT_CR(port, ATMEL_US_STTTO);
+
++ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
++ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); /* enable PDC controller */
++ }
++ else
++ UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
++
+ return 0;
+ }
+
+@@ -431,6 +695,31 @@
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+
+ /*
++ * Ensure everything is stopped.
++ */
++ atmel_stop_rx(port);
++ atmel_stop_tx(port);
++
++ /*
++ * Shut-down the DMA.
++ */
++ if (atmel_port->use_dma_rx) {
++ int i;
++
++ for (i = 0; i < 2; i++) {
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
++
++ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
++ kfree(pdc->buf);
++ }
++ }
++ if (atmel_port->use_dma_tx) {
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++
++ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
++ }
++
++ /*
+ * Disable all interrupts, port and break condition.
+ */
+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
+@@ -481,6 +770,7 @@
+ */
+ static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
+ {
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ unsigned long flags;
+ unsigned int mode, imr, quot, baud;
+
+@@ -490,7 +780,7 @@
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+- if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
++ if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
+ quot /= 8;
+ mode |= ATMEL_US_USCLKS_MCK_DIV8;
+ }
+@@ -539,6 +829,9 @@
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= ATMEL_US_RXBRK;
+
++ if (atmel_port->use_dma_rx) /* need to enable error interrupts */
++ UART_PUT_IER(port, port->read_status_mask);
++
+ /*
+ * Characters to ignore
+ */
+@@ -717,6 +1010,13 @@
+ clk_enable(atmel_port->clk);
+ port->uartclk = clk_get_rate(atmel_port->clk);
+ }
++
++#ifdef SUPPORT_PDC
++ atmel_port->use_dma_rx = data->use_dma_rx;
++ atmel_port->use_dma_tx = data->use_dma_tx;
++ if (atmel_port->use_dma_tx)
++ port->fifosize = PDC_BUFFER_SIZE;
++#endif
+ }
+
+ /*
+@@ -893,7 +1193,8 @@
+ struct uart_port *port = platform_get_drvdata(pdev);
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+
+- if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
++ if (device_may_wakeup(&pdev->dev)
++ && !clk_must_disable(atmel_port->clk))
+ enable_irq_wake(port->irq);
+ else {
+ uart_suspend_port(&atmel_uart, port);
+Index: linux-2.6.22.1/drivers/mtd/devices/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/mtd/devices/Kconfig (revision 1)
++++ linux-2.6.22.1/drivers/mtd/devices/Kconfig (arbetskopia)
+@@ -269,5 +269,11 @@
+ LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
+ you have managed to wipe the first block.
+
++config MTD_AT91_DATAFLASH
++ tristate "AT91RM9200 DataFlash AT45DBxxx (legacy driver)"
++ depends on MTD && ARCH_AT91RM9200 && AT91_SPI
++ help
++ This enables access to the DataFlash (AT45DBxxx) on the AT91RM9200.
++ If you have such a board, say 'Y'.
++
+ endmenu
+-
+Index: linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c
+===================================================================
+--- linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c (revision 0)
++++ linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c (revision 0)
+@@ -0,0 +1,667 @@
++/*
++ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
+ *
-+ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
-+ * bugs removed, interrupt routine markedly rewritten
++ * Copyright (C) SAN People (Pty) Ltd
+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++*/
+
-+#include <linux/err.h>
+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/i2c.h>
+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/platform_device.h>
-+#include <linux/completion.h>
-+#include <asm/io.h>
-+#include <linux/time.h>
-+#include "atmeltwi.h"
++#include <linux/slab.h>
++#include <linux/pci.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
+
-+static unsigned int baudrate = CONFIG_I2C_ATMELTWI_BAUDRATE;
-+module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
-+MODULE_PARM_DESC(baudrate, "The TWI baudrate");
++#include <asm/arch/spi.h>
+
++#undef DEBUG_DATAFLASH
+
-+struct atmel_twi {
-+ void __iomem *regs;
-+ struct i2c_adapter adapter;
-+ struct clk *pclk;
-+ spinlock_t lock;
-+ struct completion comp;
-+ u32 intmask;
-+ u8 *buf;
-+ u8 len;
-+ u8 acks_left;
-+ u8 nack;
-+ unsigned int irq;
++#define DATAFLASH_MAX_DEVICES 4 /* max number of dataflash devices */
++#undef DATAFLASH_ALWAYS_ADD_DEVICE /* always add whole device when using partitions? */
++
++#define OP_READ_CONTINUOUS 0xE8
++#define OP_READ_PAGE 0xD2
++#define OP_READ_BUFFER1 0xD4
++#define OP_READ_BUFFER2 0xD6
++#define OP_READ_STATUS 0xD7
++
++#define OP_ERASE_PAGE 0x81
++#define OP_ERASE_BLOCK 0x50
++
++#define OP_TRANSFER_BUF1 0x53
++#define OP_TRANSFER_BUF2 0x55
++#define OP_COMPARE_BUF1 0x60
++#define OP_COMPARE_BUF2 0x61
++
++#define OP_PROGRAM_VIA_BUF1 0x82
++#define OP_PROGRAM_VIA_BUF2 0x85
++
++struct dataflash_local
++{
++ int spi; /* SPI chip-select number */
+
++ unsigned int page_size; /* number of bytes per page */
++ unsigned short page_offset; /* page offset in flash address */
++};
++
++
++/* Detected DataFlash devices */
++static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES];
++static int nr_devices = 0;
++
++/* ......................................................................... */
++
++#ifdef CONFIG_MTD_PARTITIONS
++
++static struct mtd_partition static_partitions_2M[] =
++{
++ {
++ .name = "bootloader",
++ .offset = 0,
++ .size = 1 * 32 * 8 * 528, /* 1st sector = 32 blocks * 8 pages * 528 bytes */
++ .mask_flags = MTD_WRITEABLE, /* read-only */
++ },
++ {
++ .name = "kernel",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 6 * 32 * 8 * 528, /* 6 sectors */
++ },
++ {
++ .name = "filesystem",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL, /* rest = 9 sectors */
++ }
++};
++
++static struct mtd_partition static_partitions_4M[] =
++{
++ {
++ .name = "bootloader",
++ .offset = 0,
++ .size = 1 * 64 * 8 * 528, /* 1st sector = 64 blocks * 8 pages * 528 bytes */
++ .mask_flags = MTD_WRITEABLE, /* read-only */
++ },
++ {
++ .name = "kernel",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 4 * 64 * 8 * 528, /* 4 sectors */
++ },
++ {
++ .name = "filesystem",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL, /* rest = 11 sectors */
++ }
++};
++
++#if defined(CONFIG_MACH_KAFA)
++static struct mtd_partition static_partitions_8M[] =
++{
++ {
++ name: "romboot",
++ offset: 0,
++ size: 16 * 1056, /* 160 Kb */
++ mask_flags: MTD_WRITEABLE, /* read-only */
++ },
++ {
++ name: "uboot",
++ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
++ size: 128 * 1056, /* 1 MB */
++ },
++ {
++ name: "kernel",
++ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
++ size: 1024 * 1056, /* 1 MB */
++ },
++ {
++ name: "filesystem",
++ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
++ size: MTDPART_SIZ_FULL,
++ }
++};
++
++#elif defined(CONFIG_MACH_MULTMDP)
++
++static struct mtd_partition static_partitions_8M[] =
++{
++ {
++ .name = "bootloader",
++ .offset = 0,
++ .size = 12 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */
++ .mask_flags = MTD_WRITEABLE, /* read-only */
++ },
++ {
++ .name = "configuration",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 20 * 1056,
++ },
++ {
++ .name = "kernel",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 1520 * 1056,
++ },
++ {
++ .name = "filesystem",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL,
++ }
+};
-+#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
++
++#else
++
++static struct mtd_partition static_partitions_8M[] =
++{
++ {
++ .name = "bootloader",
++ .offset = 0,
++ .size = 1 * 32 * 8 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */
++ .mask_flags = MTD_WRITEABLE, /* read-only */
++ },
++ {
++ .name = "kernel",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 5 * 32 * 8 * 1056, /* 5 sectors */
++ },
++ {
++ .name = "filesystem",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL, /* rest = 26 sectors */
++ }
++};
++#endif
++
++static const char *part_probes[] = { "cmdlinepart", NULL, };
++
++#endif
++
++/* ......................................................................... */
++
++/* Allocate a single SPI transfer descriptor. We're assuming that if multiple
++ SPI transfers occur at the same time, spi_access_bus() will serialize them.
++ If this is not valid, then either (i) each dataflash 'priv' structure
++ needs it's own transfer descriptor, (ii) we lock this one, or (iii) use
++ another mechanism. */
++static struct spi_transfer_list* spi_transfer_desc;
+
+/*
-+ * Initialize the TWI hardware registers.
++ * Perform a SPI transfer to access the DataFlash device.
+ */
-+static int __devinit twi_hwinit(struct atmel_twi *twi)
++static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len,
++ char* txnext, int txnext_len, char* rxnext, int rxnext_len)
+{
-+ unsigned long cdiv, ckdiv=0;
++ struct spi_transfer_list* list = spi_transfer_desc;
+
-+ twi_writel(twi, IDR, ~0UL);
-+ twi_writel(twi, CR, TWI_BIT(SWRST)); /*Reset peripheral*/
-+ twi_readl(twi, SR);
++ list->tx[0] = tx; list->txlen[0] = tx_len;
++ list->rx[0] = rx; list->rxlen[0] = rx_len;
+
-+ cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
++ list->tx[1] = txnext; list->txlen[1] = txnext_len;
++ list->rx[1] = rxnext; list->rxlen[1] = rxnext_len;
+
-+ while (cdiv > 255) {
-+ ckdiv++;
-+ cdiv = cdiv >> 1;
-+ }
++ list->nr_transfers = nr;
+
-+ if (ckdiv > 7)
-+ return -EINVAL;
-+ else
-+ twi_writel(twi, CWGR, (TWI_BF(CKDIV, ckdiv)
-+ | TWI_BF(CHDIV, cdiv)
-+ | TWI_BF(CLDIV, cdiv)));
-+ return 0;
++ return spi_transfer(list);
+}
+
++/* ......................................................................... */
++
+/*
-+ * Waits for the i2c status register to set the specified bitmask
-+ * Returns 0 if timed out (~100ms).
++ * Poll the DataFlash device until it is READY.
+ */
-+static short twi_complete(struct atmel_twi *twi, u32 mask)
++static void at91_dataflash_waitready(void)
+{
-+ int timeout = msecs_to_jiffies(100);
++ char* command = kmalloc(2, GFP_KERNEL);
+
-+ twi->intmask = mask;
-+ init_completion(&twi->comp);
++ if (!command)
++ return;
+
-+ twi_writel(twi, IER, mask);
++ do {
++ command[0] = OP_READ_STATUS;
++ command[1] = 0;
+
-+ if (!wait_for_completion_timeout(&twi->comp, timeout)) {
-+ /* RESET TWI interface */
-+ twi_writel(twi, CR, TWI_BIT(SWRST));
++ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
++ } while ((command[1] & 0x80) == 0);
+
-+ /* Reinitialize TWI */
-+ twi_hwinit(twi);
++ kfree(command);
++}
+
-+ return -ETIMEDOUT;
++/*
++ * Return the status of the DataFlash device.
++ */
++static unsigned short at91_dataflash_status(void)
++{
++ unsigned short status;
++ char* command = kmalloc(2, GFP_KERNEL);
++
++ if (!command)
++ return 0;
++
++ command[0] = OP_READ_STATUS;
++ command[1] = 0;
++
++ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
++ status = command[1];
++
++ kfree(command);
++ return status;
++}
++
++/* ......................................................................... */
++
++/*
++ * Erase blocks of flash.
++ */
++static int at91_dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
++{
++ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
++ unsigned int pageaddr;
++ char* command;
++
++#ifdef DEBUG_DATAFLASH
++ printk("dataflash_erase: addr=%i len=%i\n", instr->addr, instr->len);
++#endif
++
++ /* Sanity checks */
++ if (instr->addr + instr->len > mtd->size)
++ return -EINVAL;
++ if ((instr->len % mtd->erasesize != 0) || (instr->len % priv->page_size != 0))
++ return -EINVAL;
++ if ((instr->addr % priv->page_size) != 0)
++ return -EINVAL;
++
++ command = kmalloc(4, GFP_KERNEL);
++ if (!command)
++ return -ENOMEM;
++
++ while (instr->len > 0) {
++ /* Calculate flash page address */
++ pageaddr = (instr->addr / priv->page_size) << priv->page_offset;
++
++ command[0] = OP_ERASE_PAGE;
++ command[1] = (pageaddr & 0x00FF0000) >> 16;
++ command[2] = (pageaddr & 0x0000FF00) >> 8;
++ command[3] = 0;
++#ifdef DEBUG_DATAFLASH
++ printk("ERASE: (%x) %x %x %x [%i]\n", command[0], command[1], command[2], command[3], pageaddr);
++#endif
++
++ /* Send command to SPI device */
++ spi_access_bus(priv->spi);
++ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
++
++ at91_dataflash_waitready(); /* poll status until ready */
++ spi_release_bus(priv->spi);
++
++ instr->addr += priv->page_size; /* next page */
++ instr->len -= priv->page_size;
+ }
++
++ kfree(command);
++
++ /* Inform MTD subsystem that erase is complete */
++ instr->state = MTD_ERASE_DONE;
++ if (instr->callback)
++ instr->callback(instr);
++
+ return 0;
+}
+
+/*
-+ * Generic i2c master transfer entrypoint.
++ * Read from the DataFlash device.
++ * from : Start offset in flash device
++ * len : Amount to read
++ * retlen : About of data actually read
++ * buf : Buffer containing the data
+ */
-+static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
++static int at91_dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
-+ struct atmel_twi *twi = to_atmel_twi(adap);
-+ struct i2c_msg *pmsg;
-+ int i;
++ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
++ unsigned int addr;
++ char* command;
+
-+ /* get first message */
-+ pmsg = msgs;
++#ifdef DEBUG_DATAFLASH
++ printk("dataflash_read: %lli .. %lli\n", from, from+len);
++#endif
+
-+ dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
++ *retlen = 0;
+
-+ twi->nack = 0;
-+ for (i = 0; i < num; i++, pmsg++) {
-+ twi->len = pmsg->len;
-+ twi->buf = pmsg->buf;
-+ twi->acks_left = pmsg->len;
-+ twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
-+ (pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
-+ twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
++ /* Sanity checks */
++ if (!len)
++ return 0;
++ if (from + len > mtd->size)
++ return -EINVAL;
+
-+ dev_dbg(&adap->dev,"#%d: internal addr %d %s byte%s %s 0x%02x\n",
-+ i,pmsg->len, pmsg->flags & I2C_M_RD ? "reading" : "writing",
-+ pmsg->len > 1 ? "s" : "",
-+ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
++ /* Calculate flash page/byte address */
++ addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size);
+
-+ /* enable */
-+ twi_writel(twi, CR, TWI_BIT(MSEN));
++ command = kmalloc(8, GFP_KERNEL);
++ if (!command)
++ return -ENOMEM;
+
-+ if (pmsg->flags & I2C_M_RD) {
-+ if (twi->len == 1)
-+ twi_writel(twi, CR,
-+ TWI_BIT(START) | TWI_BIT(STOP));
-+ else
-+ twi_writel(twi, CR, TWI_BIT(START));
++ command[0] = OP_READ_CONTINUOUS;
++ command[1] = (addr & 0x00FF0000) >> 16;
++ command[2] = (addr & 0x0000FF00) >> 8;
++ command[3] = (addr & 0x000000FF);
++#ifdef DEBUG_DATAFLASH
++ printk("READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
+
-+ if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
-+ dev_dbg(&adap->dev, "RXRDY timeout. Stopped with %d bytes left\n",
-+ twi->acks_left);
-+ return -ETIMEDOUT;
-+ }
-+ } else {
-+ twi_writel(twi, THR, twi->buf[0]);
-+ if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
-+ dev_dbg(&adap->dev, "TXRDY timeout. Stopped with %d bytes left\n",
-+ twi->acks_left);
-+ return -ETIMEDOUT;
-+ }
++ /* Send command to SPI device */
++ spi_access_bus(priv->spi);
++ do_spi_transfer(2, command, 8, command, 8, buf, len, buf, len);
++ spi_release_bus(priv->spi);
+
-+ if (twi->nack)
-+ return -ENODEV;
++ *retlen = len;
++ kfree(command);
++ return 0;
++}
++
++/*
++ * Write to the DataFlash device.
++ * to : Start offset in flash device
++ * len : Amount to write
++ * retlen : Amount of data actually written
++ * buf : Buffer containing the data
++ */
++static int at91_dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
++{
++ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
++ unsigned int pageaddr, addr, offset, writelen;
++ size_t remaining;
++ u_char *writebuf;
++ unsigned short status;
++ int res = 0;
++ char* command;
++ char* tmpbuf = NULL;
++
++#ifdef DEBUG_DATAFLASH
++ printk("dataflash_write: %lli .. %lli\n", to, to+len);
++#endif
++
++ *retlen = 0;
++
++ /* Sanity checks */
++ if (!len)
++ return 0;
++ if (to + len > mtd->size)
++ return -EINVAL;
++
++ command = kmalloc(4, GFP_KERNEL);
++ if (!command)
++ return -ENOMEM;
++
++ pageaddr = ((unsigned)to / priv->page_size);
++ offset = ((unsigned)to % priv->page_size);
++ if (offset + len > priv->page_size)
++ writelen = priv->page_size - offset;
++ else
++ writelen = len;
++ writebuf = (u_char *)buf;
++ remaining = len;
++
++ /* Allocate temporary buffer */
++ tmpbuf = kmalloc(priv->page_size, GFP_KERNEL);
++ if (!tmpbuf) {
++ kfree(command);
++ return -ENOMEM;
++ }
++
++ /* Gain access to the SPI bus */
++ spi_access_bus(priv->spi);
++
++ while (remaining > 0) {
++#ifdef DEBUG_DATAFLASH
++ printk("write @ %i:%i len=%i\n", pageaddr, offset, writelen);
++#endif
++
++ /* (1) Transfer to Buffer1 */
++ if (writelen != priv->page_size) {
++ addr = pageaddr << priv->page_offset;
++ command[0] = OP_TRANSFER_BUF1;
++ command[1] = (addr & 0x00FF0000) >> 16;
++ command[2] = (addr & 0x0000FF00) >> 8;
++ command[3] = 0;
++#ifdef DEBUG_DATAFLASH
++ printk("TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
++ at91_dataflash_waitready();
+ }
+
-+ /* Disable TWI interface */
-+ twi_writel(twi, CR, TWI_BIT(MSDIS));
++ /* (2) Program via Buffer1 */
++ addr = (pageaddr << priv->page_offset) + offset;
++ command[0] = OP_PROGRAM_VIA_BUF1;
++ command[1] = (addr & 0x00FF0000) >> 16;
++ command[2] = (addr & 0x0000FF00) >> 8;
++ command[3] = (addr & 0x000000FF);
++#ifdef DEBUG_DATAFLASH
++ printk("PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++ do_spi_transfer(2, command, 4, command, 4, writebuf, writelen, tmpbuf, writelen);
++ at91_dataflash_waitready();
++
++ /* (3) Compare to Buffer1 */
++ addr = pageaddr << priv->page_offset;
++ command[0] = OP_COMPARE_BUF1;
++ command[1] = (addr & 0x00FF0000) >> 16;
++ command[2] = (addr & 0x0000FF00) >> 8;
++ command[3] = 0;
++#ifdef DEBUG_DATAFLASH
++ printk("COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
++ at91_dataflash_waitready();
++
++ /* Get result of the compare operation */
++ status = at91_dataflash_status();
++ if ((status & 0x40) == 1) {
++ printk("at91_dataflash: Write error on page %i\n", pageaddr);
++ remaining = 0;
++ res = -EIO;
++ }
+
-+ } /* end cur msg */
++ remaining = remaining - writelen;
++ pageaddr++;
++ offset = 0;
++ writebuf += writelen;
++ *retlen += writelen;
+
-+ return i;
++ if (remaining > priv->page_size)
++ writelen = priv->page_size;
++ else
++ writelen = remaining;
++ }
++
++ /* Release SPI bus */
++ spi_release_bus(priv->spi);
++
++ kfree(tmpbuf);
++ kfree(command);
++ return res;
+}
+
++/* ......................................................................... */
+
-+static irqreturn_t twi_interrupt(int irq, void *dev_id)
-+{
-+ struct atmel_twi *twi = dev_id;
-+ int status = twi_readl(twi, SR);
++/*
++ * Initialize and register DataFlash device with MTD subsystem.
++ */
++static int __init add_dataflash(int channel, char *name, int IDsize,
++ int nr_pages, int pagesize, int pageoffset)
++{
++ struct mtd_info *device;
++ struct dataflash_local *priv;
++#ifdef CONFIG_MTD_PARTITIONS
++ struct mtd_partition *mtd_parts = 0;
++ int mtd_parts_nr = 0;
++#endif
+
-+ /* Save state for later debug prints */
-+ int old_mask = twi->intmask;
-+ int old_status = status;
++ if (nr_devices >= DATAFLASH_MAX_DEVICES) {
++ printk(KERN_ERR "at91_dataflash: Too many devices detected\n");
++ return 0;
++ }
+
-+ if (twi->intmask & status) {
-+ if (status & TWI_BIT(NACK))
-+ goto nack;
++ device = kmalloc(sizeof(struct mtd_info) + strlen(name) + 8, GFP_KERNEL);
++ if (!device)
++ return -ENOMEM;
++ memset(device, 0, sizeof(struct mtd_info));
++
++ device->name = (char *)&device[1];
++ sprintf(device->name, "%s.spi%d", name, channel);
++ device->size = nr_pages * pagesize;
++ device->erasesize = pagesize;
++ device->writesize = pagesize;
++ device->owner = THIS_MODULE;
++ device->type = MTD_DATAFLASH;
++ device->flags = MTD_WRITEABLE;
++ device->erase = at91_dataflash_erase;
++ device->read = at91_dataflash_read;
++ device->write = at91_dataflash_write;
++
++ priv = (struct dataflash_local *) kmalloc(sizeof(struct dataflash_local), GFP_KERNEL);
++ if (!priv) {
++ kfree(device);
++ return -ENOMEM;
++ }
++ memset(priv, 0, sizeof(struct dataflash_local));
+
-+ status &= twi->intmask;
++ priv->spi = channel;
++ priv->page_size = pagesize;
++ priv->page_offset = pageoffset;
++ device->priv = priv;
+
-+ if (status & TWI_BIT(TXCOMP))
-+ goto complete;
++ mtd_devices[nr_devices] = device;
++ nr_devices++;
++ printk("at91_dataflash: %s detected [spi%i] (%i bytes)\n", name, channel, device->size);
+
-+ else if (status & TWI_BIT(RXRDY)) {
-+ if ( twi->acks_left > 0 ) {
-+ twi->buf[twi->len - twi->acks_left] =
-+ twi_readl(twi, RHR);
-+ twi->acks_left--;
-+ }
-+ if ( twi->acks_left == 1 )
-+ twi_writel(twi, CR, TWI_BIT(STOP));
++#ifdef CONFIG_MTD_PARTITIONS
++#ifdef CONFIG_MTD_CMDLINE_PARTS
++ mtd_parts_nr = parse_mtd_partitions(device, part_probes, &mtd_parts, 0);
++#endif
++ if (mtd_parts_nr <= 0) {
++ switch (IDsize) {
++ case SZ_2M:
++ mtd_parts = static_partitions_2M;
++ mtd_parts_nr = ARRAY_SIZE(static_partitions_2M);
++ break;
++ case SZ_4M:
++ mtd_parts = static_partitions_4M;
++ mtd_parts_nr = ARRAY_SIZE(static_partitions_4M);
++ break;
++ case SZ_8M:
++ mtd_parts = static_partitions_8M;
++ mtd_parts_nr = ARRAY_SIZE(static_partitions_8M);
++ break;
++ }
++ }
+
-+ if (twi->acks_left == 0 ) {
-+ twi->intmask = TWI_BIT(TXCOMP);
-+ twi_writel(twi, IER, TWI_BIT(TXCOMP));
-+ }
-+ } else if (status & TWI_BIT(TXRDY)) {
-+ twi->acks_left--;
-+ if ( twi->acks_left == 0 ) {
-+ twi->intmask = TWI_BIT(TXCOMP);
-+ twi_writel(twi, IER, TWI_BIT(TXCOMP));
-+ } else if (twi->acks_left > 0)
-+ twi_writel(twi, THR, twi->buf[twi->len - twi->acks_left]);
++ if (mtd_parts_nr > 0) {
++#ifdef DATAFLASH_ALWAYS_ADD_DEVICE
++ add_mtd_device(device);
++#endif
++ return add_mtd_partitions(device, mtd_parts, mtd_parts_nr);
++ }
++#endif
++ return add_mtd_device(device); /* add whole device */
++}
++
++/*
++ * Detect and initialize DataFlash device connected to specified SPI channel.
++ *
++ * Device Density ID code Nr Pages Page Size Page offset
++ * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9
++ * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1025 264 9
++ * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9
++ * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9
++ * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10
++ * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10
++ * AT45DB0642 64Mbit (8M) xx1111xx (0x3c) 8192 1056 11
++ * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11
++ */
++static int __init at91_dataflash_detect(int channel)
++{
++ int res = 0;
++ unsigned short status;
++
++ spi_access_bus(channel);
++ status = at91_dataflash_status();
++ spi_release_bus(channel);
++ if (status != 0xff) { /* no dataflash device there */
++ switch (status & 0x3c) {
++ case 0x0c: /* 0 0 1 1 */
++ res = add_dataflash(channel, "AT45DB011B", SZ_128K, 512, 264, 9);
++ break;
++ case 0x14: /* 0 1 0 1 */
++ res = add_dataflash(channel, "AT45DB021B", SZ_256K, 1025, 264, 9);
++ break;
++ case 0x1c: /* 0 1 1 1 */
++ res = add_dataflash(channel, "AT45DB041B", SZ_512K, 2048, 264, 9);
++ break;
++ case 0x24: /* 1 0 0 1 */
++ res = add_dataflash(channel, "AT45DB081B", SZ_1M, 4096, 264, 9);
++ break;
++ case 0x2c: /* 1 0 1 1 */
++ res = add_dataflash(channel, "AT45DB161B", SZ_2M, 4096, 528, 10);
++ break;
++ case 0x34: /* 1 1 0 1 */
++ res = add_dataflash(channel, "AT45DB321B", SZ_4M, 8192, 528, 10);
++ break;
++ case 0x3c: /* 1 1 1 1 */
++ res = add_dataflash(channel, "AT45DB642", SZ_8M, 8192, 1056, 11);
++ break;
++// Currently unsupported since Atmel removed the "Main Memory Program via Buffer" commands.
++// case 0x10: /* 0 1 0 0 */
++// res = add_dataflash(channel, "AT45DB1282", SZ_16M, 16384, 1056, 11);
++// break;
++ default:
++ printk(KERN_ERR "at91_dataflash: Unknown device (%x)\n", status & 0x3c);
+ }
+ }
+
-+ dev_dbg(&twi->adapter.dev,
-+ "TWI ISR, SR 0x%08X, intmask 0x%08X, acks_left %i.\n",
-+ old_status, old_mask, twi->acks_left);
++ return res;
++}
+
-+ return IRQ_HANDLED;
++static int __init at91_dataflash_init(void)
++{
++ spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
++ if (!spi_transfer_desc)
++ return -ENOMEM;
+
-+nack:
-+ dev_dbg(&twi->adapter.dev, "NACK received!\n");
-+ twi->nack = 1;
++ /* DataFlash (SPI chip select 0) */
++ at91_dataflash_detect(0);
+
-+complete:
-+ twi_writel(twi, IDR, ~0UL);
-+ complete(&twi->comp);
++#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
++ /* DataFlash card (SPI chip select 3) */
++ at91_dataflash_detect(3);
++#endif
+
-+ dev_dbg(&twi->adapter.dev,
-+ "TWI ISR, SR 0x%08X, intmask 0x%08X, \
-+ acks_left %i - completed.\n",
-+ old_status, old_mask, twi->acks_left);
++ return 0;
++}
+
-+ return IRQ_HANDLED;
++static void __exit at91_dataflash_exit(void)
++{
++ int i;
++
++ for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) {
++ if (mtd_devices[i]) {
++#ifdef CONFIG_MTD_PARTITIONS
++ del_mtd_partitions(mtd_devices[i]);
++#else
++ del_mtd_device(mtd_devices[i]);
++#endif
++ kfree(mtd_devices[i]->priv);
++ kfree(mtd_devices[i]);
++ }
++ }
++ nr_devices = 0;
++ kfree(spi_transfer_desc);
+}
+
+
-+/*
-+ * Return list of supported functionality.
-+ */
-+static u32 twi_func(struct i2c_adapter *adapter)
++module_init(at91_dataflash_init);
++module_exit(at91_dataflash_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andrew Victor");
++MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
+Index: linux-2.6.22.1/drivers/mtd/devices/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/mtd/devices/Makefile (revision 1)
++++ linux-2.6.22.1/drivers/mtd/devices/Makefile (arbetskopia)
+@@ -18,3 +18,4 @@
+ obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
+ obj-$(CONFIG_MTD_DATAFLASH26) += at91_dataflash26.o
+ obj-$(CONFIG_MTD_M25P80) += m25p80.o
++obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o
+Index: linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0001.c
+===================================================================
+--- linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0001.c (revision 1)
++++ linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0001.c (arbetskopia)
+@@ -50,6 +50,7 @@
+ #define I82802AC 0x00ac
+ #define MANUFACTURER_ST 0x0020
+ #define M50LPW080 0x002F
++#define AT49BV640D 0x02de
+
+ static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+@@ -156,6 +157,47 @@
+ }
+ #endif
+
++/* Atmel chips don't use the same PRI format as Intel chips */
++static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
+{
-+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
++ struct map_info *map = mtd->priv;
++ struct cfi_private *cfi = map->fldrv_priv;
++ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
++ struct cfi_pri_atmel atmel_pri;
++ uint32_t features = 0;
++
++ /* Reverse byteswapping */
++ extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
++ extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
++ extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
++
++ memcpy(&atmel_pri, extp, sizeof(atmel_pri));
++ memset((char *)extp + 5, 0, sizeof(*extp) - 5);
++
++ printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
++
++ if (atmel_pri.Features & 0x01) /* chip erase supported */
++ features |= (1<<0);
++ if (atmel_pri.Features & 0x02) /* erase suspend supported */
++ features |= (1<<1);
++ if (atmel_pri.Features & 0x04) /* program suspend supported */
++ features |= (1<<2);
++ if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
++ features |= (1<<9);
++ if (atmel_pri.Features & 0x20) /* page mode read supported */
++ features |= (1<<7);
++ if (atmel_pri.Features & 0x40) /* queued erase supported */
++ features |= (1<<4);
++ if (atmel_pri.Features & 0x80) /* Protection bits supported */
++ features |= (1<<6);
++
++ extp->FeatureSupport = features;
++
++ /* burst write mode not supported */
++ cfi->cfiq->BufWriteTimeoutTyp = 0;
++ cfi->cfiq->BufWriteTimeoutMax = 0;
+}
+
-+/* For now, we only handle combined mode (smbus) */
-+static struct i2c_algorithm twi_algorithm = {
-+ .master_xfer = twi_xfer,
-+ .functionality = twi_func,
-+};
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
+ static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
+@@ -233,6 +275,7 @@
+ }
+
+ static struct cfi_fixup cfi_fixup_table[] = {
++ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
+ { CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
+ #endif
+Index: linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0002.c
+===================================================================
+--- linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0002.c (revision 1)
++++ linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0002.c (arbetskopia)
+@@ -185,6 +185,10 @@
+ extp->TopBottom = 2;
+ else
+ extp->TopBottom = 3;
++
++ /* burst write mode not supported */
++ cfi->cfiq->BufWriteTimeoutTyp = 0;
++ cfi->cfiq->BufWriteTimeoutMax = 0;
+ }
+
+ static void fixup_use_secsi(struct mtd_info *mtd, void *param)
+@@ -217,6 +221,7 @@
+ }
+
+ static struct cfi_fixup cfi_fixup_table[] = {
++ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef AMD_BOOTLOC_BUG
+ { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
+ #endif
+@@ -229,7 +234,6 @@
+ #if !FORCE_WORD_WRITE
+ { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
+ #endif
+- { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ { 0, 0, NULL, NULL }
+ };
+ static struct cfi_fixup jedec_fixup_table[] = {
+Index: linux-2.6.22.1/drivers/spi/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/spi/Kconfig (revision 1)
++++ linux-2.6.22.1/drivers/spi/Kconfig (arbetskopia)
+@@ -55,6 +55,7 @@
+ config SPI_ATMEL
+ tristate "Atmel SPI Controller"
+ depends on (ARCH_AT91 || AVR32) && SPI_MASTER
++ select SPI_AT91_MANUAL_CS if ARCH_AT91RM9200
+ help
+ This selects a driver for the Atmel SPI Controller, present on
+ many AT32 (AVR32) and AT91 (ARM) chips.
+@@ -100,6 +101,24 @@
+ inexpensive battery powered microcontroller evaluation board.
+ This same cable can be used to flash new firmware.
+
++config SPI_AT91
++ tristate "AT91RM9200 Bitbang SPI Master"
++ depends on SPI_MASTER && ARCH_AT91RM9200 && !SPI_ATMEL && EXPERIMENTAL
++ select SPI_BITBANG
++ select SPI_AT91_MANUAL_CS
++ help
++ This is dumb PIO bitbanging driver for the Atmel AT91RM9200.
++ The SPI_ATMEL driver will be its replacement, using the native
++ SPI hardware and its DMA controller.
+
++config SPI_AT91_MANUAL_CS
++ bool
++ depends on ARCH_AT91RM9200
++ help
++ Works around an AT91RM9200 problem whereby the SPI chip-select
++ will be wrongly disabled. The workaround uses those pins as
++ GPIOs instead of letting the SPI controller manage them.
++
+ config SPI_IMX
+ tristate "Freescale iMX SPI controller"
+ depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
+Index: linux-2.6.22.1/drivers/spi/atmel_spi.c
+===================================================================
+--- linux-2.6.22.1/drivers/spi/atmel_spi.c (revision 1)
++++ linux-2.6.22.1/drivers/spi/atmel_spi.c (arbetskopia)
+@@ -412,8 +412,8 @@
+ csr |= SPI_BIT(NCPHA);
+
+ /* TODO: DLYBS and DLYBCT */
+- csr |= SPI_BF(DLYBS, 10);
+- csr |= SPI_BF(DLYBCT, 10);
++ csr |= SPI_BF(DLYBS, 0);
++ csr |= SPI_BF(DLYBCT, 0);
+
+ /* chipselect must have been muxed as GPIO (e.g. in board setup) */
+ npcs_pin = (unsigned int)spi->controller_data;
+Index: linux-2.6.22.1/drivers/spi/spi_at91_bitbang.c
+===================================================================
+--- linux-2.6.22.1/drivers/spi/spi_at91_bitbang.c (revision 0)
++++ linux-2.6.22.1/drivers/spi/spi_at91_bitbang.c (revision 0)
+@@ -0,0 +1,207 @@
+/*
-+ * Main initialization routine.
++ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION)
++ *
++ * Copyright (C) 2006 David Brownell
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
-+static int __devinit twi_probe(struct platform_device *pdev)
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++
++#include <asm/arch/gpio.h>
++
++
++/*
++ * FIXME this bitbanging version is just to help bootstrap systems until
++ * there's a native SPI+IRQ+DMA controller driver ... such a driver should
++ * be a drop-in replacement for this one, and much faster.
++ *
++ * remember:
++ *
++ * - other at91 parts (like at91sam9) have multiple controllers
++ * and different pin muxing; this version is at91rm9200 specfic.
++ *
++ * - at91sam9261 SPI0 pins are directly muxed with MMC/SD pins.
++ *
++ * - rm9200 spi chipselects drop wrongly, so the native driver
++ * will need to use gpios much like this does.
++ *
++ * - real hardware only allows 8..16 bits per word, while this
++ * bitbanger allows 1..32 (incompatible superset).
++ *
++ * - this disregards clock parameters. with inlined gpio calls,
++ * gcc 3.4.4 produces about 1.5 mbit/sec, more than 2x faster
++ * than using the subroutined veresion from txrx_word().
++ *
++ * - suspend/resume and <linux/clk.h> support is missing ...
++ */
++
++#define spi_miso_bit AT91_PIN_PA0
++#define spi_mosi_bit AT91_PIN_PA1
++#define spi_sck_bit AT91_PIN_PA2
++
++struct at91_spi {
++ struct spi_bitbang bitbang;
++ struct platform_device *pdev;
++};
++
++/*----------------------------------------------------------------------*/
++
++static inline void setsck(struct spi_device *spi, int is_on)
+{
-+ struct atmel_twi *twi;
-+ struct resource *regs;
-+ struct clk *pclk;
-+ struct i2c_adapter *adapter;
-+ int rc, irq;
++ at91_set_gpio_value(spi_sck_bit, is_on);
++}
+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
++static inline void setmosi(struct spi_device *spi, int is_on)
++{
++ at91_set_gpio_value(spi_mosi_bit, is_on);
++}
+
-+ pclk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(pclk))
-+ return PTR_ERR(pclk);
-+ clk_enable(pclk);
++static inline int getmiso(struct spi_device *spi)
++{
++ return at91_get_gpio_value(spi_miso_bit);
++}
+
-+ rc = -ENOMEM;
-+ twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
-+ if (!twi) {
-+ dev_err(&pdev->dev, "can't allocate interface!\n");
-+ goto err_alloc_twi;
-+ }
++static void at91_spi_chipselect(struct spi_device *spi, int is_active)
++{
++ unsigned long cs = (unsigned long) spi->controller_data;
+
-+ twi->pclk = pclk;
-+ twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!twi->regs)
-+ goto err_ioremap;
++ /* set default clock polarity */
++ if (is_active)
++ setsck(spi, spi->mode & SPI_CPOL);
+
-+ irq = platform_get_irq(pdev,0);
-+ rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
-+ if (rc) {
-+ dev_err(&pdev->dev, "can't bind irq!\n");
-+ goto err_irq;
-+ }
-+ twi->irq = irq;
++ /* only support active-low (default) */
++ at91_set_gpio_value(cs, !is_active);
++}
+
-+ rc = twi_hwinit(twi);
-+ if (rc) {
-+ dev_err(&pdev->dev, "Unable to set baudrate\n");
-+ goto err_hw_init;
-+ }
++/*
++ * NOTE: this is "as fast as we can"; it should be a function of
++ * the device clock ...
++ */
++#define spidelay(X) do{} while(0)
+
-+ adapter = &twi->adapter;
-+ sprintf(adapter->name, "TWI");
-+ adapter->algo = &twi_algorithm;
-+ adapter->class = I2C_CLASS_HWMON;
-+ adapter->dev.parent = &pdev->dev;
++#define EXPAND_BITBANG_TXRX
++#include <linux/spi/spi_bitbang.h>
+
-+ platform_set_drvdata(pdev, twi);
++static u32 at91_spi_txrx_word_mode0(struct spi_device *spi,
++ unsigned nsecs, u32 word, u8 bits)
++{
++ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, 8);
++}
+
-+ rc = i2c_add_adapter(adapter);
-+ if (rc) {
-+ dev_err(&pdev->dev, "Adapter %s registration failed\n",
-+ adapter->name);
-+ goto err_register;
-+ }
++static u32 at91_spi_txrx_word_mode1(struct spi_device *spi,
++ unsigned nsecs, u32 word, u8 bits)
++{
++ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, 8);
++}
+
-+ dev_info(&pdev->dev, "Atmel TWI i2c bus device (baudrate %dk) at 0x%08lx.\n",
-+ baudrate/1000, (unsigned long)regs->start);
++static u32 at91_spi_txrx_word_mode2(struct spi_device *spi,
++ unsigned nsecs, u32 word, u8 bits)
++{
++ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, 8);
++}
+
-+ return 0;
++static u32 at91_spi_txrx_word_mode3(struct spi_device *spi,
++ unsigned nsecs, u32 word, u8 bits)
++{
++ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, 8);
++}
+
++/*----------------------------------------------------------------------*/
+
-+err_register:
-+ platform_set_drvdata(pdev, NULL);
++static int __init at91_spi_probe(struct platform_device *pdev)
++{
++ int status;
++ struct spi_master *master;
++ struct at91_spi *at91_spi;
+
-+err_hw_init:
-+ free_irq(irq, twi);
++ if (pdev->id != 0) /* SPI0 bus */
++ return -EINVAL;
+
-+err_irq:
-+ iounmap(twi->regs);
++ master = spi_alloc_master(&pdev->dev, sizeof *at91_spi);
++ if (!master)
++ return -ENOMEM;
+
-+err_ioremap:
-+ kfree(twi);
++ at91_spi = spi_master_get_devdata(master);
++ at91_spi->pdev = pdev;
++ platform_set_drvdata(pdev, at91_spi);
+
-+err_alloc_twi:
-+ clk_disable(pclk);
-+ clk_put(pclk);
++ /* SPI and bitbang hookup */
++ master->bus_num = 0;
++ master->num_chipselect = 4;
+
-+ return rc;
++ at91_spi->bitbang.master = spi_master_get(master);
++ at91_spi->bitbang.chipselect = at91_spi_chipselect;
++ at91_spi->bitbang.txrx_word[SPI_MODE_0] = at91_spi_txrx_word_mode0;
++ at91_spi->bitbang.txrx_word[SPI_MODE_1] = at91_spi_txrx_word_mode1;
++ at91_spi->bitbang.txrx_word[SPI_MODE_2] = at91_spi_txrx_word_mode2;
++ at91_spi->bitbang.txrx_word[SPI_MODE_3] = at91_spi_txrx_word_mode3;
++
++ status = spi_bitbang_start(&at91_spi->bitbang);
++ if (status < 0)
++ (void) spi_master_put(at91_spi->bitbang.master);
++
++ return status;
+}
+
-+static int __devexit twi_remove(struct platform_device *pdev)
++static int __exit at91_spi_remove(struct platform_device *pdev)
+{
-+ struct atmel_twi *twi = platform_get_drvdata(pdev);
-+ int res;
++ struct at91_spi *at91_spi = platform_get_drvdata(pdev);
++ int status;
+
-+ platform_set_drvdata(pdev, NULL);
-+ res = i2c_del_adapter(&twi->adapter);
-+ twi_writel(twi, CR, TWI_BIT(MSDIS));
-+ iounmap(twi->regs);
-+ clk_disable(twi->pclk);
-+ clk_put(twi->pclk);
-+ free_irq(twi->irq, twi);
-+ kfree(twi);
++ /* stop() unregisters child devices too */
++ status = spi_bitbang_stop(&at91_spi->bitbang);
++ (void) spi_master_put(at91_spi->bitbang.master);
+
-+ return res;
++ platform_set_drvdata(pdev, NULL);
++ return status;
+}
+
-+static struct platform_driver twi_driver = {
-+ .probe = twi_probe,
-+ .remove = __devexit_p(twi_remove),
++static struct platform_driver at91_spi_driver = {
++ .probe = at91_spi_probe,
++ .remove = __exit_p(at91_spi_remove),
+ .driver = {
-+ .name = "atmel_twi",
++ .name = "at91_spi",
+ .owner = THIS_MODULE,
+ },
+};
+
-+static int __init atmel_twi_init(void)
++static int __init at91_spi_init(void)
+{
-+ return platform_driver_register(&twi_driver);
++ at91_set_gpio_output(spi_sck_bit, 0);
++ at91_set_gpio_output(spi_mosi_bit, 0);
++ at91_set_gpio_input(spi_miso_bit, 1 /* pullup */);
++
++ /* register driver */
++ return platform_driver_register(&at91_spi_driver);
+}
+
-+static void __exit atmel_twi_exit(void)
++static void __exit at91_spi_exit(void)
+{
-+ platform_driver_unregister(&twi_driver);
++ platform_driver_unregister(&at91_spi_driver);
+}
+
-+module_init(atmel_twi_init);
-+module_exit(atmel_twi_exit);
++device_initcall(at91_spi_init);
++module_exit(at91_spi_exit);
+
-+MODULE_AUTHOR("Espen Krangnes");
-+MODULE_DESCRIPTION("I2C driver for Atmel TWI");
++MODULE_ALIAS("at91_spi.0");
++
++MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)");
++MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
-diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
-index 50e06e8..7bbea09 100644
---- a/drivers/input/mouse/Kconfig
-+++ b/drivers/input/mouse/Kconfig
-@@ -216,4 +216,20 @@ config MOUSE_HIL
+Index: linux-2.6.22.1/drivers/spi/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/spi/Makefile (revision 1)
++++ linux-2.6.22.1/drivers/spi/Makefile (arbetskopia)
+@@ -23,6 +23,7 @@
+ obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
+ obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
+ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
++obj-$(CONFIG_SPI_AT91) += spi_at91_bitbang.o
+ # ... add above this line ...
+
+ # SPI protocol drivers (device/link on bus)
+Index: linux-2.6.22.1/drivers/input/mouse/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/input/mouse/Kconfig (revision 1)
++++ linux-2.6.22.1/drivers/input/mouse/Kconfig (arbetskopia)
+@@ -216,4 +216,20 @@
help
Say Y here to support HIL pointers.
@@ -5676,23 +14921,10 @@ index 50e06e8..7bbea09 100644
+ module will be called gpio_mouse.
+
endif
-diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
-index aa4ba87..9e6e363 100644
---- a/drivers/input/mouse/Makefile
-+++ b/drivers/input/mouse/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_MOUSE_PS2) += psmouse.o
- obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o
- obj-$(CONFIG_MOUSE_HIL) += hil_ptr.o
- obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o
-+obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o
-
- psmouse-objs := psmouse-base.o synaptics.o
-
-diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
-new file mode 100644
-index 0000000..0936d6b
---- /dev/null
-+++ b/drivers/input/mouse/gpio_mouse.c
+Index: linux-2.6.22.1/drivers/input/mouse/gpio_mouse.c
+===================================================================
+--- linux-2.6.22.1/drivers/input/mouse/gpio_mouse.c (revision 0)
++++ linux-2.6.22.1/drivers/input/mouse/gpio_mouse.c (revision 0)
@@ -0,0 +1,196 @@
+/*
+ * Driver for simulating a mouse on GPIO lines.
@@ -5890,456 +15122,1613 @@ index 0000000..0936d6b
+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+MODULE_DESCRIPTION("GPIO mouse driver");
+MODULE_LICENSE("GPL");
-diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
-index 87d2046..9ce3ca1 100644
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -95,6 +95,14 @@ config LEDS_COBALT
- help
- This option enables support for the front LED on Cobalt Server
-
-+config LEDS_GPIO
-+ tristate "LED Support for GPIO connected LEDs"
-+ depends on LEDS_CLASS && GENERIC_GPIO
-+ help
-+ This option enables support for the LEDs connected to GPIO
-+ outputs. To be useful the particular board must have LEDs
-+ and they must be connected to the GPIO lines.
-+
- comment "LED Triggers"
+Index: linux-2.6.22.1/drivers/input/mouse/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/input/mouse/Makefile (revision 1)
++++ linux-2.6.22.1/drivers/input/mouse/Makefile (arbetskopia)
+@@ -15,6 +15,7 @@
+ obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o
+ obj-$(CONFIG_MOUSE_HIL) += hil_ptr.o
+ obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o
++obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o
- config LEDS_TRIGGERS
-diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
-index aa2c18e..f8995c9 100644
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
- obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
- obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
- obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o
-+obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
+ psmouse-objs := psmouse-base.o synaptics.o
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
-diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
-new file mode 100644
-index 0000000..47d90db
---- /dev/null
-+++ b/drivers/leds/leds-gpio.c
-@@ -0,0 +1,199 @@
+Index: linux-2.6.22.1/drivers/video/s1d15605fb.c
+===================================================================
+--- linux-2.6.22.1/drivers/video/s1d15605fb.c (revision 0)
++++ linux-2.6.22.1/drivers/video/s1d15605fb.c (revision 0)
+@@ -0,0 +1,659 @@
+/*
-+ * LEDs driver for GPIOs
++ * drivers/video/s1d15605.c
+ *
-+ * Copyright (C) 2007 8D Technologies inc.
-+ * Raphael Assenat <raph@8d.com>
++ * Adapted from several sources including:
++ * 1) Driver for AT91 LCD Controller
++ * Copyright (C) 2006 Atmel
++ *
++ * 2) Copyright (C) 2005 S. Kevin Hester
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file COPYING in the main directory of this archive for
++ * more details.
++ *
++ * This is a basic framebuffer driver for the Optrex F-51320 128x64 mono LCD
++ * display. This display uses a clone of the common Epson SED 1531 display
++ * controller.
++ *
++ * I've heavily borrowed code from the vfb.c driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
+ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
++
++#ifdef DEBUG
++#define MSG(string, args...) printk("s1d15605fb:" string, ##args)
++#else
++#define MSG(string, args...)
++#endif
++
+#include <linux/kernel.h>
-+#include <linux/init.h>
+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <linux/workqueue.h>
++#include <linux/dma-mapping.h>
++#include <linux/interrupt.h>
++#include <linux/clk.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/delay.h>
+
-+#include <asm/gpio.h>
++#include <asm/uaccess.h>
+
-+struct gpio_led_data {
-+ struct led_classdev cdev;
-+ unsigned gpio;
-+ struct work_struct work;
-+ u8 new_level;
-+ u8 can_sleep;
-+ u8 active_low;
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++#ifdef CONFIG_PMAC_BACKLIGHT
++#include <asm/backlight.h>
++#endif
++
++#define VIDEOWIDTH 128
++#define VIDEOHEIGHT 64
++#define VIDEODEPTH 1 /* bits/pixel */
++#define VIDEOWIDTH_BYTES ((VIDEOWIDTH * VIDEODEPTH) / 8)
++
++/* The number of bytes that actually go to the device */
++#define ACTUALVIDEOMEMSIZE (VIDEOWIDTH_BYTES * VIDEOHEIGHT)
++#define VIDEOMEMSIZE PAGE_SIZE
++
++static struct fb_var_screeninfo s1d15605_default __initdata = {
++ .xres = VIDEOWIDTH,
++ .yres = VIDEOHEIGHT,
++ .xres_virtual = VIDEOWIDTH,
++ .yres_virtual = VIDEOHEIGHT,
++ .bits_per_pixel = VIDEODEPTH,
++ .red = { 0, 1, 0 },
++ .green = { 0, 1, 0 },
++ .blue = { 0, 1, 0 },
++ .activate = FB_ACTIVATE_NOW,
++ .pixclock = 20000,
++ .vmode = FB_VMODE_NONINTERLACED,
+};
+
-+static void gpio_led_work(struct work_struct *work)
-+{
-+ struct gpio_led_data *led_dat =
-+ container_of(work, struct gpio_led_data, work);
++static struct fb_fix_screeninfo s1d15605_fix __initdata = {
++ .id = "s1d15605",
++ .type = FB_TYPE_PACKED_PIXELS,
++ .visual = FB_VISUAL_MONO10,
++ .xpanstep = 0,
++ .ypanstep = 0,
++ .ywrapstep = 0,
++ .accel = FB_ACCEL_NONE,
++};
+
-+ gpio_set_value_cansleep(led_dat->gpio, led_dat->new_level);
-+}
++struct s1d15605fb_info {
++ struct fb_info *info;
++ char *mmio;
++ unsigned long reset_pin;
++ struct platform_device *pdev;
++};
+
-+static void gpio_led_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
++/*
++ * LCD device interface
++ */
++#define RESET_DISPLAY 0xE2
++#define LCD_BIAS_1_9 0xA2
++#define ADC_SELECT_REVERSE 0xA1
++#define COMMON_OUTPUT_NORMAL 0xC0
++#define V5_RESISTOR_RATIO 0x26
++#define ELECTRONIC_VOLUME_SET 0x81
++#define ELECTRONIC_VOLUME_INIT 0x20
++#define POWER_CONTROL_SET 0x28
++#define VOLTAGE_REGULATOR 0x02
++#define VOLTAGE_FOLLOWER 0x01
++#define BOOSTER_CIRCUIT 0x04
++#define DISPLAY_ON 0xAF
++#define START_LINE_SET 0x40
++#define PAGE_ADDRESS_SET 0xB0
++#define COLUMN_ADDRESS_HIGH 0x10
++#define COLUMN_ADDRESS_LOW 0x00
++#define RESISTOR_RATIO_START 0x20
++
++#define NUM_OF_PAGES 8
++#define NUM_OF_COLUMNS 128
++
++#define WRITE_COMMAND(x) __raw_writeb((x), (sinfo)->mmio)
++#define READ_COMMAND __raw_readb((sinfo)->mmio)
++#define WRITE_DATA(x) __raw_writeb((x), (sinfo)->mmio + (0x10000))
++#define READ_DATA __raw_readb((sinfo)->mmio + (0x10000))
++
++
++/*
++ * s1d15605fb_resize_framebuffer
++ *
++ * Free allocated space if different. Allocate on new of changed.
++ * Returns -ENOMEM if the new framebuffer can not be allocated,
++ * zero on success.
++ */
++static int s1d15605fb_resize_framebuffer(struct s1d15605fb_info *sinfo)
+{
-+ struct gpio_led_data *led_dat =
-+ container_of(led_cdev, struct gpio_led_data, cdev);
-+ int level;
++ struct fb_info *info = sinfo->info;
++ struct fb_fix_screeninfo *fix = &info->fix;
++ struct fb_var_screeninfo *var = &info->var;
++ unsigned int new_size;
++ void *new_vaddr;
+
-+ if (value == LED_OFF)
-+ level = 0;
-+ else
-+ level = 1;
++ new_size = ((var->xres_virtual * var->yres_virtual * var->bits_per_pixel) / 8);
+
-+ if (led_dat->active_low)
-+ level = !level;
++ MSG("%s: x (%d) y (%d) bpp (%d): new size 0x%08x\n", __FUNCTION__,
++ var->xres_virtual, var->yres_virtual, var->bits_per_pixel, new_size);
+
-+ /* setting GPIOs with I2C/etc requires a preemptible task context */
-+ if (led_dat->can_sleep) {
-+ if (preempt_count()) {
-+ led_dat->new_level = level;
-+ schedule_work(&led_dat->work);
-+ } else
-+ gpio_set_value_cansleep(led_dat->gpio, level);
-+ } else
-+ gpio_set_value(led_dat->gpio, level);
-+}
++ if (new_size == fix->smem_len)
++ return 0;
+
-+static int __init gpio_led_probe(struct platform_device *pdev)
-+{
-+ struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
-+ struct gpio_led *cur_led;
-+ struct gpio_led_data *leds_data, *led_dat;
-+ int i, ret = 0;
++ if (fix->smem_len) {
++ kfree(info->screen_base);
++ }
+
-+ if (!pdata)
-+ return -EBUSY;
++ new_vaddr = kmalloc(new_size, GFP_KERNEL);
+
-+ leds_data = kzalloc(sizeof(struct gpio_led_data) * pdata->num_leds,
-+ GFP_KERNEL);
-+ if (!leds_data)
++ if (!new_vaddr) {
++ fix->smem_len = 0;
+ return -ENOMEM;
++ }
+
-+ for (i = 0; i < pdata->num_leds; i++) {
-+ cur_led = &pdata->leds[i];
-+ led_dat = &leds_data[i];
++ info->screen_base = new_vaddr;
++ fix->smem_start = (unsigned)new_vaddr;
++ fix->smem_len = new_size;
++ fix->line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
+
-+ led_dat->cdev.name = cur_led->name;
-+ led_dat->cdev.default_trigger = cur_led->default_trigger;
-+ led_dat->gpio = cur_led->gpio;
-+ led_dat->can_sleep = gpio_cansleep(cur_led->gpio);
-+ led_dat->active_low = cur_led->active_low;
-+ led_dat->cdev.brightness_set = gpio_led_set;
-+ led_dat->cdev.brightness = cur_led->active_low ? LED_FULL : LED_OFF;
++ dev_info(info->device,
++ "%luKiB frame buffer at %08lx (mapped at %p)\n",
++ (unsigned long)info->fix.smem_len / 1024,
++ (unsigned long)info->fix.smem_start,
++ info->screen_base);
+
-+ ret = gpio_request(led_dat->gpio, led_dat->cdev.name);
-+ if (ret < 0)
-+ goto err;
++ return 0;
++}
+
-+ gpio_direction_output(led_dat->gpio, led_dat->active_low);
+
-+ ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
-+ if (ret < 0) {
-+ gpio_free(led_dat->gpio);
-+ goto err;
++/*
++ * The s1d15605 seems to be divided into eight 128 pixel wide pages (from top to
++ * bottom) each page seems to be eight pixels high, where these eight pixels are
++ * one byte
++ */
++static void s1d15605_update(struct fb_info *info)
++{
++ struct s1d15605fb_info *sinfo = info->par;
++ int page, i, row, colmask;
++ u8 retVal, *rowPtr;
++
++ WRITE_COMMAND(START_LINE_SET);
++ for (page = 0; page < NUM_OF_PAGES; ++page) {
++ WRITE_COMMAND(PAGE_ADDRESS_SET + page);
++ WRITE_COMMAND(COLUMN_ADDRESS_HIGH);
++ WRITE_COMMAND(COLUMN_ADDRESS_LOW);
++
++ for (i = 0; i < NUM_OF_COLUMNS; ++i)
++ {
++ /* point of opportunity: optimization */
++ colmask = (1 << (i & 0x7));
++ rowPtr = (u8*)(info->screen_base);
++ rowPtr += (VIDEOWIDTH_BYTES * 8 * page);
++ rowPtr += (i >> 3);
++ retVal = 0;
++ for (row = 0; row < 8; ++row)
++ {
++ retVal = (retVal >> 1) | (((*rowPtr) & colmask) ? 0x80 : 0);
++ rowPtr += VIDEOWIDTH_BYTES;
++ }
++ WRITE_DATA(retVal);
+ }
++ }
+
-+ INIT_WORK(&led_dat->work, gpio_led_work);
++ WRITE_COMMAND(DISPLAY_ON);
++}
++
++
++/*
++ * Setting the video mode has been split into two parts.
++ * First part, xxxfb_check_var, must not write anything
++ * to hardware, it should only verify and adjust var.
++ * This means it doesn't alter par but it does use hardware
++ * data from it to check this var.
++ */
++static int s1d15605_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
++{
++ /*
++ * Some very basic checks
++ */
++ if (!var->xres)
++ var->xres = 1;
++ if (!var->yres)
++ var->yres = 1;
++ if (var->xres > var->xres_virtual)
++ var->xres_virtual = var->xres;
++ if (var->yres > var->yres_virtual)
++ var->yres_virtual = var->yres;
++
++ if(var->bits_per_pixel > VIDEODEPTH)
++ return -EINVAL;
++
++ /*
++ * Memory limit
++ */
++ if (((var->yres_virtual * var->bits_per_pixel * var->yres_virtual) >> 3) >
++ ACTUALVIDEOMEMSIZE)
++ return -ENOMEM;
++
++ /*
++ * Now that we checked it we alter var. The reason being is that the video
++ * mode passed in might not work but slight changes to it might make it
++ * work. This way we let the user know what is acceptable.
++ */
++ switch (var->bits_per_pixel) {
++ case 1:
++ var->red.offset = var->green.offset = var->blue.offset = 0;
++ var->red.length = var->green.length = var->blue.length
++ = var->bits_per_pixel;
++ break;
++ default:
++ return -EINVAL;
+ }
+
-+ platform_set_drvdata(pdev, leds_data);
++ var->xoffset = var->yoffset = 0;
++ var->red.msb_right = var->green.msb_right = var->blue.msb_right =
++ var->transp.msb_right = 0;
+
+ return 0;
++}
+
-+err:
-+ if (i > 0) {
-+ for (i = i - 1; i >= 0; i--) {
-+ led_classdev_unregister(&leds_data[i].cdev);
-+ gpio_free(leds_data[i].gpio);
-+ }
-+ }
+
-+ flush_scheduled_work();
-+ kfree(leds_data);
++/*
++ * This routine actually sets the video mode. It's in here where we
++ * the hardware state info->par and fix which can be affected by the
++ * change in par. For this driver it doesn't do much.
++ */
++static int s1d15605_set_par(struct fb_info *info)
++{
++ int ret;
+
++ MSG("%s:\n", __func__);
++ MSG(" * resolution: %ux%u (%ux%u virtual)\n",
++ info->var.xres, info->var.yres,
++ info->var.xres_virtual, info->var.yres_virtual);
++
++ ret = s1d15605fb_resize_framebuffer(info->par);
++
++ info->fix.visual = FB_VISUAL_MONO10;
+ return ret;
+}
+
-+static int __exit gpio_led_remove(struct platform_device *pdev)
++
++/*
++ * Set a single color register. The values supplied are already
++ * rounded down to the hardware's capabilities (according to the
++ * entries in the var structure). Return != 0 for invalid regno.
++ */
++static int s1d15605_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
++ u_int transp, struct fb_info *info)
+{
-+ int i;
-+ struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
-+ struct gpio_led_data *leds_data;
++ if (regno > 1) /* no. of hw registers - we only do mono now */
++ return 1;
+
-+ leds_data = platform_get_drvdata(pdev);
++ return 0;
++}
+
-+ for (i = 0; i < pdata->num_leds; i++) {
-+ led_classdev_unregister(&leds_data[i].cdev);
-+ gpio_free(leds_data[i].gpio);
++
++/*
++ * Currently, the routine will simply shut-off the backlight and prevent
++ * updates/refreshes. Modify according to application.
++ *
++ * 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off
++ */
++static int s1d15605_blank(int blank, struct fb_info *info)
++{
++#ifdef CONFIG_PMAC_BACKLIGHT
++ if (blank)
++ pmac_backlight->props.power = FB_BLANK_POWERDOWN;
++ else
++ pmac_backlight->props.power = FB_BLANK_UNBLANK;
++ backlight_update_status(pmac_backlight);
++#endif
++ return 1;
++}
++
++
++/*
++ * Pan or Wrap the Display
++ *
++ * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
++ */
++/*
++static int s1d15605_pan_display(struct fb_var_screeninfo *var,
++ struct fb_info *info)
++{
++ if (var->vmode & FB_VMODE_YWRAP) {
++ if (var->yoffset < 0
++ || var->yoffset >= info->var.yres_virtual
++ || var->xoffset)
++ return -EINVAL;
++ } else {
++ if (var->xoffset + var->xres > info->var.xres_virtual ||
++ var->yoffset + var->yres > info->var.yres_virtual)
++ return -EINVAL;
+ }
-+
-+ kfree(leds_data);
++ info->var.xoffset = var->xoffset;
++ info->var.yoffset = var->yoffset;
++ if (var->vmode & FB_VMODE_YWRAP)
++ info->var.vmode |= FB_VMODE_YWRAP;
++ else
++ info->var.vmode &= ~FB_VMODE_YWRAP;
++ return 0;
++}
++*/
++
++
++static void s1d15605_copyarea(struct fb_info *info, const struct fb_copyarea *region)
++{
++ cfb_copyarea(info, region);
++ s1d15605_update(info);
++}
++
++
++static void s1d15605_fillrect (struct fb_info *info, const struct fb_fillrect *rect)
++{
++ cfb_fillrect(info, rect);
++ s1d15605_update(info);
++}
++
++
++static void s1d15605_imageblit(struct fb_info *p, const struct fb_image *image)
++{
++ cfb_imageblit(p, image);
++ s1d15605_update(p);
++}
++
++
++/*
++ * Write the users data to our framebuffer, and then trigger a psuedo DMA
++ */
++static ssize_t s1d15605_write(struct file *file, const char *buf,
++ size_t count, loff_t *ppos)
++{
++ unsigned long p = *ppos;
++ struct inode *inode = file->f_dentry->d_inode;
++ int fbidx = iminor(inode);
++ struct fb_info *info = registered_fb[fbidx];
++ int err;
++
++ if (p > info->fix.smem_len)
++ return -ENOSPC;
++ if (count >= info->fix.smem_len)
++ count = info->fix.smem_len;
++ err = 0;
++ if (count + p > info->fix.smem_len) {
++ count = info->fix.smem_len - p;
++ err = -ENOSPC;
++ }
++ if (count) {
++ char *base_addr;
++
++ base_addr = info->screen_base;
++ count -= copy_from_user(base_addr+p, buf, count);
++ *ppos += count;
++ err = -EFAULT;
++ }
++
++ s1d15605_update(info);
++
++ if (count)
++ return count;
++
++ return err;
++}
++
++#ifdef USE_PRIVATE_VMA_FXS
++static void s1d15605_vma_open(struct vm_area_struct *vma)
++{
++ // FIXME - store stats in the device data via vm_private_data
++}
++
++
++static void s1d15605_vma_close(struct vm_area_struct *vma)
++{
++ // FIXME - store stats in the device data via vm_private_data
++}
++
++
++static struct page *s1d15605_vma_nopage(struct vm_area_struct *vma,
++ unsigned long address, int *type)
++{
++ struct page *page;
++ struct fb_info *info = vma->vm_private_data;
++
++ page = virt_to_page(info->screen_base);
++ get_page(page);
++
++ // FIXME - now someone has a link to our page, start periodically blitting
++ // latest updates to the actual device.
++
++ return page;
++}
++
++
++static struct vm_operations_struct s1d15605_vm_ops = {
++ .open = s1d15605_vma_open,
++ .close = s1d15605_vma_close,
++ .nopage = s1d15605_vma_nopage
++};
++
++
++/* We don't do much here - because we have special vm_ops */
++static int s1d15605_mmap(struct fb_info *info, struct vm_area_struct *vma)
++{
++ vma->vm_ops = &s1d15605_vm_ops;
++ vma->vm_flags |= VM_RESERVED;
++ vma->vm_private_data = info;
++ s1d15605_vma_open(vma);
+
+ return 0;
+}
++#endif /* USE_PRIVATE_VMA_FXS */
+
-+#ifdef CONFIG_PM
-+static int gpio_led_suspend(struct platform_device *pdev, pm_message_t state)
++
++static struct fb_ops s1d15605fb_ops = {
++ .owner = THIS_MODULE,
++ .fb_check_var = s1d15605_check_var,
++ .fb_set_par = s1d15605_set_par,
++ .fb_setcolreg = s1d15605_setcolreg,
++ .fb_blank = s1d15605_blank,
++// .fb_pan_display = s1d15605_pan_display,
++ .fb_fillrect = s1d15605_fillrect,
++ .fb_copyarea = s1d15605_copyarea,
++ .fb_imageblit = s1d15605_imageblit,
++ .fb_write = s1d15605_write,
++#ifdef USE_PRIVATE_VMA_FXS
++ .fb_mmap = s1d15605_mmap,
++#endif
++};
++
++
++static void s1d15605_device_init(struct s1d15605fb_info *sinfo) {
++
++ char value;
++
++ /* release the reset line by reading the device - proto hardware */
++ value = READ_COMMAND;
++ value = READ_COMMAND;
++
++#ifdef CONFIG_MACH_KB9200
++ /* new boards have dedicated reset line */
++ gpio_set_value(sinfo->reset_pin, 1);
++#endif
++
++ /* initialize the device within 5ms */
++ WRITE_COMMAND(RESET_DISPLAY);
++ WRITE_COMMAND(LCD_BIAS_1_9);
++ WRITE_COMMAND(ADC_SELECT_REVERSE);
++ WRITE_COMMAND(COMMON_OUTPUT_NORMAL);
++ WRITE_COMMAND(V5_RESISTOR_RATIO);
++ WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
++ WRITE_COMMAND(ELECTRONIC_VOLUME_INIT);
++ WRITE_COMMAND(POWER_CONTROL_SET | VOLTAGE_REGULATOR | VOLTAGE_FOLLOWER | BOOSTER_CIRCUIT);
++ WRITE_COMMAND(DISPLAY_ON);
++
++ WRITE_COMMAND(RESISTOR_RATIO_START + 4);
++ WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
++ WRITE_COMMAND(0x33);
++}
++
++
++static int s1d15605fb_probe(struct platform_device *pdev)
+{
-+ struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
-+ struct gpio_led_data *leds_data;
-+ int i;
-+
-+ leds_data = platform_get_drvdata(pdev);
++ struct device *dev = &pdev->dev;
++ struct fb_info *info;
++ struct s1d15605fb_info *sinfo;
++ int ret;
+
-+ for (i = 0; i < pdata->num_leds; i++)
-+ led_classdev_suspend(&leds_data[i].cdev);
++ MSG("%s\n", __func__);
++
++ if (!(info = framebuffer_alloc(sizeof(struct s1d15605fb_info), dev))) {
++ dev_err(dev, "Cannot allocate framebuffer struct\n");
++ return -ENOMEM;
++ }
++
++ sinfo = info->par;
++ sinfo->info = info;
++ sinfo->pdev = pdev;
++
++ if (pdev->num_resources < 2) {
++ dev_err(dev, "Resources unusable\n");
++ ret = -ENODEV;
++ goto free_info;
++ }
++
++ info->fbops = &s1d15605fb_ops;
++ strcpy(info->fix.id, pdev->name);
++
++ info->fix.mmio_start = pdev->resource[0].start;
++ info->fix.mmio_len = pdev->resource[0].end - pdev->resource[0].start + 1;
++ sinfo->reset_pin = pdev->resource[1].start;
++
++ ret = s1d15605fb_resize_framebuffer(sinfo);
++ if (ret < 0) {
++ dev_err(dev, "Cannot resize framebuffer: %d\n", ret);
++ goto free_fb;
++ }
++
++ if (!request_mem_region(info->fix.mmio_start,
++ info->fix.mmio_len, pdev->name)) {
++ ret = -EBUSY;
++ goto free_fb;
++ }
++
++ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
++ if (!sinfo->mmio) {
++ dev_err(dev, "Cannot map LCD memory region\n");
++ goto release_mem;
++ }
++
++ s1d15605_device_init(sinfo);
++
++ ret = fb_find_mode(&info->var, info, NULL, NULL, 0, NULL, 1);
++
++ if (!ret || (ret == 4))
++ info->var = s1d15605_default;
++
++ info->fix = s1d15605_fix;
++ info->flags = FBINFO_FLAG_DEFAULT |
++/* FBINFO_HWACCEL_YPAN | */
++ FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
++
++ ret = register_framebuffer(info);
++ if (ret < 0) {
++ dev_err(dev, "Failed to register framebuffer device: %d\n", ret);
++ goto unmap_mmio;
++ }
++
++ dev_set_drvdata(dev, info);
++
++ memset(info->screen_base, 0, info->fix.smem_len);
++ info->var.activate |= FB_ACTIVATE_NOW;
++ ret = fb_set_var(info, &info->var);
++ if (ret) {
++ dev_warn(dev, "Unable to set display parameters\n");
++ }
++
++ info->var.activate &= ~(FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW);
++
++ dev_dbg(dev, "%s SUCCESS\n", __func__);
++
++ dev_info(dev, "Driver $Revision: 1.1 $\n");
+
+ return 0;
++
++unmap_mmio:
++ iounmap(sinfo->mmio);
++release_mem:
++ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
++free_fb:
++ kfree(info->screen_base);
++
++free_info:
++ framebuffer_release(info);
++
++ dev_dbg(dev, "%s FAILED\n", __func__);
++ return ret;
+}
+
-+static int gpio_led_resume(struct platform_device *pdev)
++
++static int s1d15605fb_remove(struct platform_device *pdev)
+{
-+ struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
-+ struct gpio_led_data *leds_data;
-+ int i;
++ struct device *dev = &pdev->dev;
++ struct fb_info *info = dev_get_drvdata(dev);
++ struct s1d15605fb_info *sinfo = info->par;
+
-+ leds_data = platform_get_drvdata(pdev);
++ if (!sinfo)
++ return 0;
+
-+ for (i = 0; i < pdata->num_leds; i++)
-+ led_classdev_resume(&leds_data[i].cdev);
++ unregister_framebuffer(info);
+
++ iounmap(sinfo->mmio);
++ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
++
++ kfree(info->screen_base);
++
++ dev_set_drvdata(dev, NULL);
++ framebuffer_release(info);
+ return 0;
+}
-+#else
-+#define gpio_led_suspend NULL
-+#define gpio_led_resume NULL
-+#endif
+
-+static struct platform_driver gpio_led_driver = {
-+ .remove = __exit_p(gpio_led_remove),
-+ .suspend = gpio_led_suspend,
-+ .resume = gpio_led_resume,
++
++static struct platform_driver s1d15605fb_driver = {
++ .probe = s1d15605fb_probe,
++ .remove = s1d15605fb_remove,
+ .driver = {
-+ .name = "leds-gpio",
++ .name = "s1d15605fb",
+ .owner = THIS_MODULE,
+ },
+};
+
-+static int __init gpio_led_init(void)
++
++static int __init s1d15605fb_init(void)
+{
-+ return platform_driver_probe(&gpio_led_driver, gpio_led_probe);
++ return platform_driver_register(&s1d15605fb_driver);
+}
+
-+static void __exit gpio_led_exit(void)
++
++static void __exit s1d15605fb_exit(void)
+{
-+ platform_driver_unregister(&gpio_led_driver);
++ platform_driver_unregister(&s1d15605fb_driver);
+}
+
-+module_init(gpio_led_init);
-+module_exit(gpio_led_exit);
+
-+MODULE_AUTHOR("Raphael Assenat <raph@8d.com>");
-+MODULE_DESCRIPTION("GPIO LED driver");
++module_init(s1d15605fb_init);
++module_exit(s1d15605fb_exit);
++
++
++MODULE_AUTHOR("KwikByte");
++MODULE_DESCRIPTION("Epson S1D15605 LCD Controller framebuffer driver");
+MODULE_LICENSE("GPL");
-diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
-index 616eee9..0810d83 100644
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -187,5 +187,15 @@ config THINKPAD_ACPI_BAY
+Index: linux-2.6.22.1/drivers/video/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/video/Kconfig (revision 1)
++++ linux-2.6.22.1/drivers/video/Kconfig (arbetskopia)
+@@ -822,6 +822,17 @@
+ framebuffer. Product specs at
+ <http://www.erd.epson.com/vdc/html/products.htm>.
+
++config FB_S1D15605
++ tristate "Epson S1D15605 framebuffer support"
++ depends on FB
++ default m if MACH_KB9200
++ select FB_CFB_FILLRECT
++ select FB_CFB_COPYAREA
++ select FB_CFB_IMAGEBLIT
++ help
++ Build in support for the S1D15605 Epson Research 128x64
++ LCD controller as a framebuffer.
++
+ config FB_S1D13XXX
+ tristate "Epson S1D13XXX framebuffer support"
+ depends on FB
+@@ -835,7 +846,7 @@
+
+ config FB_ATMEL
+ tristate "AT91/AT32 LCD Controller support"
+- depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
++ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || AVR32)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+@@ -849,6 +860,16 @@
+ Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
+ to let frame buffer in external SDRAM.
- If you are not sure, say Y here.
++config FB_ATMEL_STN
++ bool "Use a STN display with AT91/AT32 LCD Controller"
++ depends on FB_ATMEL && ARCH_AT91SAM9261
++ default n
++ help
++ Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
++ Controller. Say N if you want to connect a TFT.
++
++ If unsure, say N.
++
+ config FB_NVIDIA
+ tristate "nVidia Framebuffer Support"
+ depends on FB && PCI
+Index: linux-2.6.22.1/drivers/video/atmel_lcdfb.c
+===================================================================
+--- linux-2.6.22.1/drivers/video/atmel_lcdfb.c (revision 1)
++++ linux-2.6.22.1/drivers/video/atmel_lcdfb.c (arbetskopia)
+@@ -37,7 +37,9 @@
+ #endif
-+config ATMEL_SSC
-+ tristate "Device driver for Atmel SSC peripheral"
-+ depends on AVR32 || ARCH_AT91
-+ ---help---
-+ This option enables device driver support for Atmel Syncronized
-+ Serial Communication peripheral (SSC).
+ #if defined(CONFIG_ARCH_AT91)
+-#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT
++#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
++ | FBINFO_PARTIAL_PAN_OK \
++ | FBINFO_HWACCEL_YPAN)
+
+ static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
+ struct fb_var_screeninfo *var)
+@@ -74,12 +76,35 @@
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .xpanstep = 0,
+- .ypanstep = 0,
++ .ypanstep = 1,
+ .ywrapstep = 0,
+ .accel = FB_ACCEL_NONE,
+ };
+
++static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
++{
++ unsigned long value;
+
++ if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000()))
++ return xres;
+
-+ The SSC peripheral supports a wide variety of serial frame based
-+ communications, i.e. I2S, SPI, etc.
++ value = xres;
++ if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) {
++ /* STN display */
++ if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) {
++ value *= 3;
++ }
++ if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4
++ || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8
++ && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL ))
++ value = DIV_ROUND_UP(value, 4);
++ else
++ value = DIV_ROUND_UP(value, 8);
++ }
++
++ return value;
++}
++
+ static void atmel_lcdfb_update_dma(struct fb_info *info,
+ struct fb_var_screeninfo *var)
+ {
+@@ -181,6 +206,7 @@
+ var->xoffset = var->yoffset = 0;
-+ If unsure, say N.
- endmenu
-diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
-index 8abbf2f..2d52cc6 100644
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -14,3 +14,4 @@ obj-$(CONFIG_PHANTOM) += phantom.o
- obj-$(CONFIG_SGI_IOC4) += ioc4.o
- obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
- obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o
-+obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
-diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
-new file mode 100644
-index 0000000..058ccac
---- /dev/null
-+++ b/drivers/misc/atmel-ssc.c
-@@ -0,0 +1,174 @@
+ switch (var->bits_per_pixel) {
++ case 1:
+ case 2:
+ case 4:
+ case 8:
+@@ -195,8 +221,11 @@
+ var->blue.offset = 10;
+ var->red.length = var->green.length = var->blue.length = 5;
+ break;
++ case 32:
++ var->transp.offset = 24;
++ var->transp.length = 8;
++ /* fall through */
+ case 24:
+- case 32:
+ var->red.offset = 0;
+ var->green.offset = 8;
+ var->blue.offset = 16;
+@@ -228,8 +257,10 @@
+ static int atmel_lcdfb_set_par(struct fb_info *info)
+ {
+ struct atmel_lcdfb_info *sinfo = info->par;
++ unsigned long hozval_linesz;
+ unsigned long value;
+ unsigned long clk_value_khz;
++ unsigned long bits_per_line;
+
+ dev_dbg(info->device, "%s:\n", __func__);
+ dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n",
+@@ -241,12 +272,15 @@
+
+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+
+- if (info->var.bits_per_pixel <= 8)
++ if (info->var.bits_per_pixel == 1)
++ info->fix.visual = FB_VISUAL_MONO01;
++ else if (info->var.bits_per_pixel <= 8)
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ else
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+
+- info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
++ bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel;
++ info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8);
+
+ /* Re-initialize the DMA engine... */
+ dev_dbg(info->device, " * update DMA engine\n");
+@@ -262,19 +296,22 @@
+ /* Set pixel clock */
+ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
+
+- value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
++ value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
+
+- if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
+- value++;
+-
+ value = (value / 2) - 1;
++ dev_dbg(info->device, " * programming CLKVAL = 0x%08lx\n", value);
+
+ if (value <= 0) {
+ dev_notice(info->device, "Bypassing pixel clock divider\n");
+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
+- } else
++ } else {
+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
++ info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1)));
++ dev_dbg(info->device, " updated pixclk: %lu KHz\n",
++ PICOS2KHZ(info->var.pixclock));
++ }
+
++
+ /* Initialize control register 2 */
+ value = sinfo->default_lcdcon2;
+
+@@ -311,9 +348,14 @@
+ dev_dbg(info->device, " * LCDTIM2 = %08lx\n", value);
+ lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
+
++ /* Horizontal value (aka line size) */
++ hozval_linesz = compute_hozval(info->var.xres,
++ lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2));
++
+ /* Display size */
+- value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
++ value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
+ value |= info->var.yres - 1;
++ dev_dbg(info->device, " * LCDFRMCFG = %08lx\n", value);
+ lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
+
+ /* FIFO Threshold: Use formula from data sheet */
+@@ -421,6 +463,15 @@
+ ret = 0;
+ }
+ break;
++
++ case FB_VISUAL_MONO01:
++ if (regno < 2) {
++ val = (regno == 0) ? 0x00 : 0x1F;
++ lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
++ ret = 0;
++ }
++ break;
++
+ }
+
+ return ret;
+Index: linux-2.6.22.1/drivers/video/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/video/Makefile (revision 1)
++++ linux-2.6.22.1/drivers/video/Makefile (arbetskopia)
+@@ -87,7 +87,8 @@
+ obj-$(CONFIG_FB_SA1100) += sa1100fb.o
+ obj-$(CONFIG_FB_HIT) += hitfb.o
+ obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
+-obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
++obj-$(CONFIG_FB_S1D15605) += s1d15605fb.o
++obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
+ obj-$(CONFIG_FB_PVR2) += pvr2fb.o
+ obj-$(CONFIG_FB_VOODOO1) += sstfb.o
+ obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
+Index: linux-2.6.22.1/drivers/video/backlight/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/video/backlight/Kconfig (revision 1)
++++ linux-2.6.22.1/drivers/video/backlight/Kconfig (arbetskopia)
+@@ -8,26 +8,44 @@
+ Enable this to be able to choose the drivers for controlling the
+ backlight and the LCD panel on some platforms, for example on PDAs.
+
+-config BACKLIGHT_CLASS_DEVICE
+- tristate "Lowlevel Backlight controls"
++#
++# LCD
++#
++config LCD_CLASS_DEVICE
++ tristate "Lowlevel LCD controls"
+ depends on BACKLIGHT_LCD_SUPPORT
+ default m
+ help
+- This framework adds support for low-level control of the LCD
+- backlight. This includes support for brightness and power.
++ This framework adds support for low-level control of LCD.
++ Some framebuffer devices connect to platform-specific LCD modules
++ in order to have a platform-specific way to control the flat panel
++ (contrast and applying power to the LCD (not to the backlight!)).
+
+ To have support for your specific LCD panel you will have to
+ select the proper drivers which depend on this option.
+
+-config LCD_CLASS_DEVICE
+- tristate "Lowlevel LCD controls"
++config LCD_LTV350QV
++ tristate "Samsung LTV350QV LCD Panel"
++ depends on LCD_CLASS_DEVICE && SPI_MASTER
++ default n
++ help
++ If you have a Samsung LTV350QV LCD panel, say y to include a
++ power control driver for it. The panel starts up in power
++ off state, so you need this driver in order to see any
++ output.
++
++ The LTV350QV panel is present on all ATSTK1000 boards.
++
++#
++# Backlight
++#
++config BACKLIGHT_CLASS_DEVICE
++ tristate "Lowlevel Backlight controls"
+ depends on BACKLIGHT_LCD_SUPPORT
+ default m
+ help
+- This framework adds support for low-level control of LCD.
+- Some framebuffer devices connect to platform-specific LCD modules
+- in order to have a platform-specific way to control the flat panel
+- (contrast and applying power to the LCD (not to the backlight!)).
++ This framework adds support for low-level control of the LCD
++ backlight. This includes support for brightness and power.
+
+ To have support for your specific LCD panel you will have to
+ select the proper drivers which depend on this option.
+@@ -71,3 +89,11 @@
+ help
+ If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
+ backlight driver.
++
++config BACKLIGHT_KB920x
++ tristate "KwikByte KB9202 Backlight Driver"
++ depends on BACKLIGHT_CLASS_DEVICE && MACH_KB9200
++ default y
++ help
++ If you have a KwikByte KB9202 board, say Y to enable the
++ backlight driver.
+Index: linux-2.6.22.1/drivers/video/backlight/ltv350qv.c
+===================================================================
+--- linux-2.6.22.1/drivers/video/backlight/ltv350qv.c (revision 0)
++++ linux-2.6.22.1/drivers/video/backlight/ltv350qv.c (revision 0)
+@@ -0,0 +1,340 @@
+/*
-+ * Atmel SSC driver
++ * Power control for Samsung LTV350QV Quarter VGA LCD Panel
+ *
-+ * Copyright (C) 2007 Atmel Corporation
++ * Copyright (C) 2006, 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
-+
-+#include <linux/platform_device.h>
-+#include <linux/list.h>
-+#include <linux/clk.h>
++#include <linux/delay.h>
+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/list.h>
-+#include <linux/spinlock.h>
-+#include <linux/atmel-ssc.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/lcd.h>
++#include <linux/module.h>
++#include <linux/spi/spi.h>
+
-+/* Serialize access to ssc_list and user count */
-+static DEFINE_SPINLOCK(user_lock);
-+static LIST_HEAD(ssc_list);
++#include "ltv350qv.h"
+
-+struct ssc_device *ssc_request(unsigned int ssc_num)
++#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
++
++struct ltv350qv {
++ struct spi_device *spi;
++ u8 *buffer;
++ int power;
++ struct lcd_device *ld;
++};
++
++/*
++ * The power-on and power-off sequences are taken from the
++ * LTV350QV-F04 data sheet from Samsung. The register definitions are
++ * taken from the S6F2002 command list also from Samsung. Both
++ * documents are distributed with the AVR32 Linux BSP CD from Atmel.
++ *
++ * There's still some voodoo going on here, but it's a lot better than
++ * in the first incarnation of the driver where all we had was the raw
++ * numbers from the initialization sequence.
++ */
++static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val)
+{
-+ int ssc_valid = 0;
-+ struct ssc_device *ssc;
++ struct spi_message msg;
++ struct spi_transfer index_xfer = {
++ .len = 3,
++ .cs_change = 1,
++ };
++ struct spi_transfer value_xfer = {
++ .len = 3,
++ .cs_change = 1,
++ };
+
-+ spin_lock(&user_lock);
-+ list_for_each_entry(ssc, &ssc_list, list) {
-+ if (ssc->pdev->id == ssc_num) {
-+ ssc_valid = 1;
-+ break;
-+ }
-+ }
++ spi_message_init(&msg);
+
-+ if (!ssc_valid) {
-+ spin_unlock(&user_lock);
-+ dev_dbg(&ssc->pdev->dev, "could not find requested device\n");
-+ return ERR_PTR(-ENODEV);
-+ }
++ /* register index */
++ lcd->buffer[0] = LTV_OPC_INDEX;
++ lcd->buffer[1] = 0x00;
++ lcd->buffer[2] = reg & 0x7f;
++ index_xfer.tx_buf = lcd->buffer;
++ spi_message_add_tail(&index_xfer, &msg);
+
-+ if (ssc->user) {
-+ spin_unlock(&user_lock);
-+ dev_dbg(&ssc->pdev->dev, "module busy\n");
-+ return ERR_PTR(-EBUSY);
-+ }
-+ ssc->user++;
-+ spin_unlock(&user_lock);
++ /* register value */
++ lcd->buffer[4] = LTV_OPC_DATA;
++ lcd->buffer[5] = val >> 8;
++ lcd->buffer[6] = val;
++ value_xfer.tx_buf = lcd->buffer + 4;
++ spi_message_add_tail(&value_xfer, &msg);
+
-+ clk_enable(ssc->clk);
++ return spi_sync(lcd->spi, &msg);
++}
+
-+ return ssc;
++/* The comments are taken straight from the data sheet */
++static int ltv350qv_power_on(struct ltv350qv *lcd)
++{
++ int ret;
++
++ /* Power On Reset Display off State */
++ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000))
++ goto err;
++ msleep(15);
++
++ /* Power Setting Function 1 */
++ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE))
++ goto err;
++ if (ltv350qv_write_reg(lcd, LTV_PWRCTL2, LTV_VCOML_ENABLE))
++ goto err_power1;
++
++ /* Power Setting Function 2 */
++ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++ LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
++ | LTV_SUPPLY_CURRENT(5)))
++ goto err_power2;
++
++ msleep(55);
++
++ /* Instruction Setting */
++ ret = ltv350qv_write_reg(lcd, LTV_IFCTL,
++ LTV_NMD | LTV_REV | LTV_NL(0x1d));
++ ret |= ltv350qv_write_reg(lcd, LTV_DATACTL,
++ LTV_DS_SAME | LTV_CHS_480
++ | LTV_DF_RGB | LTV_RGB_BGR);
++ ret |= ltv350qv_write_reg(lcd, LTV_ENTRY_MODE,
++ LTV_VSPL_ACTIVE_LOW
++ | LTV_HSPL_ACTIVE_LOW
++ | LTV_DPL_SAMPLE_RISING
++ | LTV_EPL_ACTIVE_LOW
++ | LTV_SS_RIGHT_TO_LEFT);
++ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL1, LTV_CLW(3));
++ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
++ LTV_NW_INV_1LINE | LTV_FWI(3));
++ ret |= ltv350qv_write_reg(lcd, LTV_VBP, 0x000a);
++ ret |= ltv350qv_write_reg(lcd, LTV_HBP, 0x0021);
++ ret |= ltv350qv_write_reg(lcd, LTV_SOTCTL, LTV_SDT(3) | LTV_EQ(0));
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(0), 0x0103);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(1), 0x0301);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(2), 0x1f0f);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(3), 0x1f0f);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(4), 0x0707);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(5), 0x0307);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(6), 0x0707);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(7), 0x0000);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(8), 0x0004);
++ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(9), 0x0000);
++ if (ret)
++ goto err_settings;
++
++ /* Wait more than 2 frames */
++ msleep(20);
++
++ /* Display On Sequence */
++ ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++ LTV_VCOM_DISABLE | LTV_VCOMOUT_ENABLE
++ | LTV_POWER_ON | LTV_DRIVE_CURRENT(5)
++ | LTV_SUPPLY_CURRENT(5));
++ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
++ LTV_NW_INV_1LINE | LTV_DSC | LTV_FWI(3));
++ if (ret)
++ goto err_disp_on;
++
++ /* Display should now be ON. Phew. */
++ return 0;
++
++err_disp_on:
++ /*
++ * Try to recover. Error handling probably isn't very useful
++ * at this point, just make a best effort to switch the panel
++ * off.
++ */
++ ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++ LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
++ | LTV_SUPPLY_CURRENT(5));
++ ltv350qv_write_reg(lcd, LTV_GATECTL2,
++ LTV_NW_INV_1LINE | LTV_FWI(3));
++err_settings:
++err_power2:
++err_power1:
++ ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
++ msleep(1);
++err:
++ ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
++ return -EIO;
+}
-+EXPORT_SYMBOL(ssc_request);
+
-+void ssc_free(struct ssc_device *ssc)
++static int ltv350qv_power_off(struct ltv350qv *lcd)
+{
-+ spin_lock(&user_lock);
-+ if (ssc->user) {
-+ ssc->user--;
-+ clk_disable(ssc->clk);
-+ } else {
-+ dev_dbg(&ssc->pdev->dev, "device already free\n");
-+ }
-+ spin_unlock(&user_lock);
++ int ret;
++
++ /* Display Off Sequence */
++ ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
++ LTV_VCOM_DISABLE
++ | LTV_DRIVE_CURRENT(5)
++ | LTV_SUPPLY_CURRENT(5));
++ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
++ LTV_NW_INV_1LINE | LTV_FWI(3));
++
++ /* Power down setting 1 */
++ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
++
++ /* Wait at least 1 ms */
++ msleep(1);
++
++ /* Power down setting 2 */
++ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
++
++ /*
++ * No point in trying to recover here. If we can't switch the
++ * panel off, what are we supposed to do other than inform the
++ * user about the failure?
++ */
++ if (ret)
++ return -EIO;
++
++ /* Display power should now be OFF */
++ return 0;
+}
-+EXPORT_SYMBOL(ssc_free);
+
-+static int __init ssc_probe(struct platform_device *pdev)
++static int ltv350qv_power(struct ltv350qv *lcd, int power)
+{
-+ int retval = 0;
-+ struct resource *regs;
-+ struct ssc_device *ssc;
++ int ret = 0;
+
-+ ssc = kzalloc(sizeof(struct ssc_device), GFP_KERNEL);
-+ if (!ssc) {
-+ dev_dbg(&pdev->dev, "out of memory\n");
-+ retval = -ENOMEM;
-+ goto out;
-+ }
++ if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
++ ret = ltv350qv_power_on(lcd);
++ else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
++ ret = ltv350qv_power_off(lcd);
+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_dbg(&pdev->dev, "no mmio resource defined\n");
-+ retval = -ENXIO;
-+ goto out_free;
-+ }
++ if (!ret)
++ lcd->power = power;
+
-+ ssc->clk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(ssc->clk)) {
-+ dev_dbg(&pdev->dev, "no pclk clock defined\n");
-+ retval = -ENXIO;
-+ goto out_free;
-+ }
++ return ret;
++}
+
-+ ssc->pdev = pdev;
-+ ssc->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!ssc->regs) {
-+ dev_dbg(&pdev->dev, "ioremap failed\n");
-+ retval = -EINVAL;
-+ goto out_clk;
-+ }
++static int ltv350qv_set_power(struct lcd_device *ld, int power)
++{
++ struct ltv350qv *lcd;
+
-+ /* disable all interrupts */
-+ clk_enable(ssc->clk);
-+ ssc_writel(ssc->regs, IDR, ~0UL);
-+ ssc_readl(ssc->regs, SR);
-+ clk_disable(ssc->clk);
++ lcd = class_get_devdata(&ld->class_dev);
++ return ltv350qv_power(lcd, power);
++}
+
-+ ssc->irq = platform_get_irq(pdev, 0);
-+ if (!ssc->irq) {
-+ dev_dbg(&pdev->dev, "could not get irq\n");
-+ retval = -ENXIO;
-+ goto out_unmap;
++static int ltv350qv_get_power(struct lcd_device *ld)
++{
++ struct ltv350qv *lcd;
++
++ lcd = class_get_devdata(&ld->class_dev);
++ return lcd->power;
++}
++
++static struct lcd_ops ltv_ops = {
++ .get_power = ltv350qv_get_power,
++ .set_power = ltv350qv_set_power,
++};
++
++static int __devinit ltv350qv_probe(struct spi_device *spi)
++{
++ struct ltv350qv *lcd;
++ struct lcd_device *ld;
++ int ret;
++
++ lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL);
++ if (!lcd)
++ return -ENOMEM;
++
++ lcd->spi = spi;
++ lcd->power = FB_BLANK_POWERDOWN;
++ lcd->buffer = kzalloc(8, GFP_KERNEL);
++
++ ld = lcd_device_register("ltv350qv", lcd, &ltv_ops);
++ if (IS_ERR(ld)) {
++ ret = PTR_ERR(ld);
++ goto out_free_lcd;
+ }
++ lcd->ld = ld;
+
-+ spin_lock(&user_lock);
-+ list_add_tail(&ssc->list, &ssc_list);
-+ spin_unlock(&user_lock);
++ ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK);
++ if (ret)
++ goto out_unregister;
+
-+ platform_set_drvdata(pdev, ssc);
++ dev_set_drvdata(&spi->dev, lcd);
+
-+ dev_info(&pdev->dev, "Atmel SSC device at 0x%p (irq %d)\n",
-+ ssc->regs, ssc->irq);
++ return 0;
+
-+ goto out;
++out_unregister:
++ lcd_device_unregister(ld);
++out_free_lcd:
++ kfree(lcd);
++ return ret;
++}
+
-+out_unmap:
-+ iounmap(ssc->regs);
-+out_clk:
-+ clk_put(ssc->clk);
-+out_free:
-+ kfree(ssc);
-+out:
-+ return retval;
++static int __devexit ltv350qv_remove(struct spi_device *spi)
++{
++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++ ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++ lcd_device_unregister(lcd->ld);
++ kfree(lcd);
++
++ return 0;
+}
+
-+static int __devexit ssc_remove(struct platform_device *pdev)
++#ifdef CONFIG_PM
++static int ltv350qv_suspend(struct spi_device *spi,
++ pm_message_t state, u32 level)
+{
-+ struct ssc_device *ssc = platform_get_drvdata(pdev);
++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
+
-+ spin_lock(&user_lock);
-+ iounmap(ssc->regs);
-+ clk_put(ssc->clk);
-+ list_del(&ssc->list);
-+ kfree(ssc);
-+ spin_unlock(&user_lock);
++ if (level == SUSPEND_POWER_DOWN)
++ return ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
+
+ return 0;
+}
+
-+static struct platform_driver ssc_driver = {
-+ .remove = __devexit_p(ssc_remove),
++static int ltv350qv_resume(struct spi_device *spi, u32 level)
++{
++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++ if (level == RESUME_POWER_ON)
++ return ltv350qv_power(lcd, FB_BLANK_UNBLANK);
++
++ return 0;
++}
++#else
++#define ltv350qv_suspend NULL
++#define ltv350qv_resume NULL
++#endif
++
++/* Power down all displays on reboot, poweroff or halt */
++static void ltv350qv_shutdown(struct spi_device *spi)
++{
++ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++
++ ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++}
++
++static struct spi_driver ltv350qv_driver = {
++ .driver = {
++ .name = "ltv350qv",
++ .bus = &spi_bus_type,
++ .owner = THIS_MODULE,
++ },
++
++ .probe = ltv350qv_probe,
++ .remove = __devexit_p(ltv350qv_remove),
++ .shutdown = ltv350qv_shutdown,
++ .suspend = ltv350qv_suspend,
++ .resume = ltv350qv_resume,
++};
++
++static int __init ltv350qv_init(void)
++{
++ return spi_register_driver(&ltv350qv_driver);
++}
++
++static void __exit ltv350qv_exit(void)
++{
++ spi_unregister_driver(&ltv350qv_driver);
++}
++module_init(ltv350qv_init);
++module_exit(ltv350qv_exit);
++
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.22.1/drivers/video/backlight/ltv350qv.h
+===================================================================
+--- linux-2.6.22.1/drivers/video/backlight/ltv350qv.h (revision 0)
++++ linux-2.6.22.1/drivers/video/backlight/ltv350qv.h (revision 0)
+@@ -0,0 +1,95 @@
++/*
++ * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel
++ *
++ * Copyright (C) 2006, 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __LTV350QV_H
++#define __LTV350QV_H
++
++#define LTV_OPC_INDEX 0x74
++#define LTV_OPC_DATA 0x76
++
++#define LTV_ID 0x00 /* ID Read */
++#define LTV_IFCTL 0x01 /* Display Interface Control */
++#define LTV_DATACTL 0x02 /* Display Data Control */
++#define LTV_ENTRY_MODE 0x03 /* Entry Mode */
++#define LTV_GATECTL1 0x04 /* Gate Control 1 */
++#define LTV_GATECTL2 0x05 /* Gate Control 2 */
++#define LTV_VBP 0x06 /* Vertical Back Porch */
++#define LTV_HBP 0x07 /* Horizontal Back Porch */
++#define LTV_SOTCTL 0x08 /* Source Output Timing Control */
++#define LTV_PWRCTL1 0x09 /* Power Control 1 */
++#define LTV_PWRCTL2 0x0a /* Power Control 2 */
++#define LTV_GAMMA(x) (0x10 + (x)) /* Gamma control */
++
++/* Bit definitions for LTV_IFCTL */
++#define LTV_IM (1 << 15)
++#define LTV_NMD (1 << 14)
++#define LTV_SSMD (1 << 13)
++#define LTV_REV (1 << 7)
++#define LTV_NL(x) (((x) & 0x001f) << 0)
++
++/* Bit definitions for LTV_DATACTL */
++#define LTV_DS_SAME (0 << 12)
++#define LTV_DS_D_TO_S (1 << 12)
++#define LTV_DS_S_TO_D (2 << 12)
++#define LTV_CHS_384 (0 << 9)
++#define LTV_CHS_480 (1 << 9)
++#define LTV_CHS_492 (2 << 9)
++#define LTV_DF_RGB (0 << 6)
++#define LTV_DF_RGBX (1 << 6)
++#define LTV_DF_XRGB (2 << 6)
++#define LTV_RGB_RGB (0 << 2)
++#define LTV_RGB_BGR (1 << 2)
++#define LTV_RGB_GRB (2 << 2)
++#define LTV_RGB_RBG (3 << 2)
++
++/* Bit definitions for LTV_ENTRY_MODE */
++#define LTV_VSPL_ACTIVE_LOW (0 << 15)
++#define LTV_VSPL_ACTIVE_HIGH (1 << 15)
++#define LTV_HSPL_ACTIVE_LOW (0 << 14)
++#define LTV_HSPL_ACTIVE_HIGH (1 << 14)
++#define LTV_DPL_SAMPLE_RISING (0 << 13)
++#define LTV_DPL_SAMPLE_FALLING (1 << 13)
++#define LTV_EPL_ACTIVE_LOW (0 << 12)
++#define LTV_EPL_ACTIVE_HIGH (1 << 12)
++#define LTV_SS_LEFT_TO_RIGHT (0 << 8)
++#define LTV_SS_RIGHT_TO_LEFT (1 << 8)
++#define LTV_STB (1 << 1)
++
++/* Bit definitions for LTV_GATECTL1 */
++#define LTV_CLW(x) (((x) & 0x0007) << 12)
++#define LTV_GAON (1 << 5)
++#define LTV_SDR (1 << 3)
++
++/* Bit definitions for LTV_GATECTL2 */
++#define LTV_NW_INV_FRAME (0 << 14)
++#define LTV_NW_INV_1LINE (1 << 14)
++#define LTV_NW_INV_2LINE (2 << 14)
++#define LTV_DSC (1 << 12)
++#define LTV_GIF (1 << 8)
++#define LTV_FHN (1 << 7)
++#define LTV_FTI(x) (((x) & 0x0003) << 4)
++#define LTV_FWI(x) (((x) & 0x0003) << 0)
++
++/* Bit definitions for LTV_SOTCTL */
++#define LTV_SDT(x) (((x) & 0x0007) << 10)
++#define LTV_EQ(x) (((x) & 0x0007) << 2)
++
++/* Bit definitions for LTV_PWRCTL1 */
++#define LTV_VCOM_DISABLE (1 << 14)
++#define LTV_VCOMOUT_ENABLE (1 << 11)
++#define LTV_POWER_ON (1 << 9)
++#define LTV_DRIVE_CURRENT(x) (((x) & 0x0007) << 4) /* 0=off, 5=max */
++#define LTV_SUPPLY_CURRENT(x) (((x) & 0x0007) << 0) /* 0=off, 5=max */
++
++/* Bit definitions for LTV_PWRCTL2 */
++#define LTV_VCOML_ENABLE (1 << 13)
++#define LTV_VCOML_VOLTAGE(x) (((x) & 0x001f) << 8) /* 0=1V, 31=-1V */
++#define LTV_VCOMH_VOLTAGE(x) (((x) & 0x001f) << 0) /* 0=3V, 31=4.5V */
++
++#endif /* __LTV350QV_H */
+Index: linux-2.6.22.1/drivers/video/backlight/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/video/backlight/Makefile (revision 1)
++++ linux-2.6.22.1/drivers/video/backlight/Makefile (arbetskopia)
+@@ -1,9 +1,12 @@
+ # Backlight & LCD drivers
+
+ obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
++obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
++
+ obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
+ obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
+ obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
+ obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
+ obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
+ obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
++obj-$(CONFIG_BACKLIGHT_KB920x) += kb920x_bl.o
+Index: linux-2.6.22.1/drivers/video/backlight/kb920x_bl.c
+===================================================================
+--- linux-2.6.22.1/drivers/video/backlight/kb920x_bl.c (revision 0)
++++ linux-2.6.22.1/drivers/video/backlight/kb920x_bl.c (revision 0)
+@@ -0,0 +1,164 @@
++/*
++ * Backlight Driver for KB9202
++ *
++ * Copyright (c) 2006 KwikByte
++ *
++ * Based on Sharp's Corgi Backlight Driver
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/spinlock.h>
++#include <linux/fb.h>
++#include <linux/backlight.h>
++
++#include <asm/arch/gpio.h>
++
++/* The backlight is on(1)/off(0) */
++#define KB9202_DEFAULT_INTENSITY 1
++#define KB9202_MAX_INTENSITY 1
++
++static int kb9202bl_suspended;
++static int current_intensity = 0;
++static DEFINE_SPINLOCK(bl_lock);
++
++static int kb9202bl_set_intensity(struct backlight_device *bd)
++{
++ unsigned long flags;
++ int intensity = bd->props.brightness;
++
++ if (bd->props.power != FB_BLANK_UNBLANK)
++ intensity = 0;
++ if (bd->props.fb_blank != FB_BLANK_UNBLANK)
++ intensity = 0;
++ if (kb9202bl_suspended)
++ intensity = 0;
++
++ if ((!current_intensity) && (bd->props.power == FB_BLANK_UNBLANK))
++ intensity = 1;
++
++ spin_lock_irqsave(&bl_lock, flags);
++ if (intensity)
++ gpio_set_value(AT91_PIN_PC23, 1);
++ else
++ gpio_set_value(AT91_PIN_PC23, 0);
++ spin_unlock_irqrestore(&bl_lock, flags);
++
++ current_intensity = intensity;
++
++ return 0;
++}
++
++static int kb9202bl_get_intensity(struct backlight_device *bd)
++{
++ return current_intensity;
++}
++
++static struct backlight_ops kb9202bl_ops = {
++ .get_brightness = kb9202bl_get_intensity,
++ .update_status = kb9202bl_set_intensity,
++};
++
++static int __init kb9202bl_probe(struct platform_device *pdev)
++{
++ struct backlight_device *bd;
++
++ bd = backlight_device_register ("kb9202-bl", &pdev->dev, NULL, &kb9202bl_ops);
++ if (IS_ERR(bd))
++ return PTR_ERR(bd);
++
++ platform_set_drvdata(pdev, bd);
++
++ bd->props.max_brightness = KB9202_MAX_INTENSITY;
++ bd->props.brightness = KB9202_DEFAULT_INTENSITY;
++ (void) kb9202bl_set_intensity(bd);
++
++ return 0;
++}
++
++static int kb9202bl_remove(struct platform_device *pdev)
++{
++ struct backlight_device *bd = platform_get_drvdata(pdev);
++
++ bd->props.brightness = 0;
++ bd->props.power = 0;
++ (void) kb9202bl_set_intensity(bd);
++
++ backlight_device_unregister(bd);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++static int kb9202bl_suspend(struct platform_device *dev, pm_message_t state)
++{
++ struct backlight_device *bd = platform_get_drvdata(pdev);
++
++ kb9202bl_suspended = 1;
++ (void) kb9202bl_set_intensity(bd);
++ return 0;
++}
++
++static int kb9202bl_resume(struct platform_device *dev)
++{
++ struct backlight_device *bd = platform_get_drvdata(pdev);
++
++ kb9202bl_suspended = 0;
++ (void) kb9202bl_set_intensity(bd);
++ return 0;
++}
++#else
++#define kb9202bl_suspend NULL
++#define kb9202bl_resume NULL
++#endif
++
++static struct platform_driver kb9202bl_driver = {
++ .probe = kb9202bl_probe,
++ .remove = kb9202bl_remove,
++ .suspend = kb9202bl_suspend,
++ .resume = kb9202bl_resume,
+ .driver = {
-+ .name = "ssc",
++ .name = "kb9202-bl",
++ .owner = THIS_MODULE,
+ },
+};
+
-+static int __init ssc_init(void)
++static struct platform_device *kb9202bl_device;
++
++static int __init kb9202bl_init(void)
+{
-+ return platform_driver_probe(&ssc_driver, ssc_probe);
++ int ret;
++
++ ret = platform_driver_register(&kb9202bl_driver);
++ if (!ret) {
++ kb9202bl_device = platform_device_alloc("kb9202-bl", -1);
++ if (!kb9202bl_device)
++ return -ENOMEM;
++
++ ret = platform_device_add(kb9202bl_device);
++ if (ret) {
++ platform_device_put(kb9202bl_device);
++ platform_driver_unregister(&kb9202bl_driver);
++ }
++ }
++ return ret;
+}
-+module_init(ssc_init);
+
-+static void __exit ssc_exit(void)
++static void __exit kb9202bl_exit(void)
+{
-+ platform_driver_unregister(&ssc_driver);
++ platform_device_unregister(kb9202bl_device);
++ platform_driver_unregister(&kb9202bl_driver);
+}
-+module_exit(ssc_exit);
+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("SSC driver for Atmel AVR32 and AT91");
++module_init(kb9202bl_init);
++module_exit(kb9202bl_exit);
++
++MODULE_AUTHOR("KwikByte <kb9200_dev@kwikbyte.com>");
++MODULE_DESCRIPTION("KB9202 Backlight Driver");
+MODULE_LICENSE("GPL");
-diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
-index e23082f..1de1716 100644
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -74,6 +74,16 @@ config MMC_AT91
+Index: linux-2.6.22.1/drivers/mmc/host/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/mmc/host/Kconfig (revision 1)
++++ linux-2.6.22.1/drivers/mmc/host/Kconfig (arbetskopia)
+@@ -74,6 +74,16 @@
If unsure, say N.
@@ -6356,22 +16745,106 @@ index e23082f..1de1716 100644
config MMC_IMX
tristate "Motorola i.MX Multimedia Card Interface support"
depends on ARCH_IMX
-diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
-index 6685f64..4b8e6e2 100644
---- a/drivers/mmc/host/Makefile
-+++ b/drivers/mmc/host/Makefile
-@@ -14,5 +14,6 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o
- obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
- obj-$(CONFIG_MMC_OMAP) += omap.o
- obj-$(CONFIG_MMC_AT91) += at91_mci.o
-+obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
- obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
+Index: linux-2.6.22.1/drivers/mmc/host/at91_mci.c
+===================================================================
+--- linux-2.6.22.1/drivers/mmc/host/at91_mci.c (revision 1)
++++ linux-2.6.22.1/drivers/mmc/host/at91_mci.c (arbetskopia)
+@@ -85,7 +85,7 @@
+
+ #define AT91_MCI_ERRORS (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE \
+ | AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE \
+- | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)
++ | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)
+
+ #define at91_mci_read(host, reg) __raw_readl((host)->baseaddr + (reg))
+ #define at91_mci_write(host, reg, val) __raw_writel((val), (host)->baseaddr + (reg))
+@@ -560,9 +560,7 @@
+ pr_debug("Status = %08X [%08X %08X %08X %08X]\n",
+ status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
+
+- if (status & (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE |
+- AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE |
+- AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)) {
++ if (status & (AT91_MCI_ERRORS)) {
+ if ((status & AT91_MCI_RCRCE) && !(mmc_resp_type(cmd) & MMC_RSP_CRC)) {
+ cmd->error = MMC_ERR_NONE;
+ }
+@@ -663,15 +661,15 @@
+
+ int_status = at91_mci_read(host, AT91_MCI_SR);
+ int_mask = at91_mci_read(host, AT91_MCI_IMR);
+-
++
+ pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask,
+ int_status & int_mask);
+-
++
+ int_status = int_status & int_mask;
-diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
-new file mode 100644
-index 0000000..74d343f
---- /dev/null
-+++ b/drivers/mmc/host/atmel-mci.c
+ if (int_status & AT91_MCI_ERRORS) {
+ completed = 1;
+-
++
+ if (int_status & AT91_MCI_UNRE)
+ pr_debug("MMC: Underrun error\n");
+ if (int_status & AT91_MCI_OVRE)
+@@ -819,7 +817,7 @@
+ mmc->f_min = 375000;
+ mmc->f_max = 25000000;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+- mmc->caps = MMC_CAP_BYTEBLOCK;
++ mmc->caps = MMC_CAP_BYTEBLOCK | MMC_CAP_MULTIWRITE;
+
+ mmc->max_blk_size = 4095;
+ mmc->max_blk_count = mmc->max_req_size;
+@@ -893,6 +891,8 @@
+
+ mmc_add_host(mmc);
+
++ device_init_wakeup(&pdev->dev, 1);
++
+ /*
+ * monitor card insertion/removal if we can
+ */
+@@ -922,6 +922,8 @@
+
+ host = mmc_priv(mmc);
+
++ device_init_wakeup(&pdev->dev, 0);
++
+ if (host->present != -1) {
+ free_irq(host->board->det_pin, host);
+ cancel_delayed_work(&host->mmc->detect);
+@@ -949,8 +951,12 @@
+ static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state)
+ {
+ struct mmc_host *mmc = platform_get_drvdata(pdev);
++ struct at91mci_host *host = mmc_priv(mmc);
+ int ret = 0;
+
++ if (device_may_wakeup(&pdev->dev))
++ enable_irq_wake(host->board->det_pin);
++
+ if (mmc)
+ ret = mmc_suspend_host(mmc, state);
+
+@@ -960,8 +966,12 @@
+ static int at91_mci_resume(struct platform_device *pdev)
+ {
+ struct mmc_host *mmc = platform_get_drvdata(pdev);
++ struct at91mci_host *host = mmc_priv(mmc);
+ int ret = 0;
+
++ if (device_may_wakeup(&pdev->dev))
++ disable_irq_wake(host->board->det_pin);
++
+ if (mmc)
+ ret = mmc_resume_host(mmc);
+
+Index: linux-2.6.22.1/drivers/mmc/host/atmel-mci.c
+===================================================================
+--- linux-2.6.22.1/drivers/mmc/host/atmel-mci.c (revision 0)
++++ linux-2.6.22.1/drivers/mmc/host/atmel-mci.c (revision 0)
@@ -0,0 +1,1217 @@
+/*
+ * Atmel MultiMedia Card Interface driver
@@ -7590,11 +18063,10 @@ index 0000000..74d343f
+
+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
+MODULE_LICENSE("GPL");
-diff --git a/drivers/mmc/host/atmel-mci.h b/drivers/mmc/host/atmel-mci.h
-new file mode 100644
-index 0000000..60d15c4
---- /dev/null
-+++ b/drivers/mmc/host/atmel-mci.h
+Index: linux-2.6.22.1/drivers/mmc/host/atmel-mci.h
+===================================================================
+--- linux-2.6.22.1/drivers/mmc/host/atmel-mci.h (revision 0)
++++ linux-2.6.22.1/drivers/mmc/host/atmel-mci.h (revision 0)
@@ -0,0 +1,192 @@
+/*
+ * Atmel MultiMedia Card Interface driver
@@ -7788,122 +18260,1577 @@ index 0000000..60d15c4
+ __raw_writel((value), (port)->regs + MCI_##reg)
+
+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
-diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
-index 2f19fa7..94304ca 100644
---- a/drivers/mtd/chips/cfi_cmdset_0001.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
-@@ -50,6 +50,7 @@
- #define I82802AC 0x00ac
- #define MANUFACTURER_ST 0x0020
- #define M50LPW080 0x002F
-+#define AT49BV640D 0x02de
+Index: linux-2.6.22.1/drivers/mmc/host/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/mmc/host/Makefile (revision 1)
++++ linux-2.6.22.1/drivers/mmc/host/Makefile (arbetskopia)
+@@ -14,5 +14,6 @@
+ obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP) += omap.o
+ obj-$(CONFIG_MMC_AT91) += at91_mci.o
++obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
+ obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
- static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -156,6 +157,47 @@ static void cfi_tell_features(struct cfi_pri_intelext *extp)
- }
- #endif
+Index: linux-2.6.22.1/drivers/misc/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/misc/Kconfig (revision 1)
++++ linux-2.6.22.1/drivers/misc/Kconfig (arbetskopia)
+@@ -187,5 +187,15 @@
-+/* Atmel chips don't use the same PRI format as Intel chips */
-+static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
+ If you are not sure, say Y here.
+
++config ATMEL_SSC
++ tristate "Device driver for Atmel SSC peripheral"
++ depends on AVR32 || ARCH_AT91
++ ---help---
++ This option enables device driver support for Atmel Syncronized
++ Serial Communication peripheral (SSC).
+
++ The SSC peripheral supports a wide variety of serial frame based
++ communications, i.e. I2S, SPI, etc.
++
++ If unsure, say N.
+ endmenu
+Index: linux-2.6.22.1/drivers/misc/atmel-ssc.c
+===================================================================
+--- linux-2.6.22.1/drivers/misc/atmel-ssc.c (revision 0)
++++ linux-2.6.22.1/drivers/misc/atmel-ssc.c (revision 0)
+@@ -0,0 +1,174 @@
++/*
++ * Atmel SSC driver
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/list.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/list.h>
++#include <linux/spinlock.h>
++#include <linux/atmel-ssc.h>
++
++/* Serialize access to ssc_list and user count */
++static DEFINE_SPINLOCK(user_lock);
++static LIST_HEAD(ssc_list);
++
++struct ssc_device *ssc_request(unsigned int ssc_num)
+{
-+ struct map_info *map = mtd->priv;
-+ struct cfi_private *cfi = map->fldrv_priv;
-+ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
-+ struct cfi_pri_atmel atmel_pri;
-+ uint32_t features = 0;
++ int ssc_valid = 0;
++ struct ssc_device *ssc;
+
-+ /* Reverse byteswapping */
-+ extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
-+ extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
-+ extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
++ spin_lock(&user_lock);
++ list_for_each_entry(ssc, &ssc_list, list) {
++ if (ssc->pdev->id == ssc_num) {
++ ssc_valid = 1;
++ break;
++ }
++ }
+
-+ memcpy(&atmel_pri, extp, sizeof(atmel_pri));
-+ memset((char *)extp + 5, 0, sizeof(*extp) - 5);
++ if (!ssc_valid) {
++ spin_unlock(&user_lock);
++ dev_dbg(&ssc->pdev->dev, "could not find requested device\n");
++ return ERR_PTR(-ENODEV);
++ }
+
-+ printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
++ if (ssc->user) {
++ spin_unlock(&user_lock);
++ dev_dbg(&ssc->pdev->dev, "module busy\n");
++ return ERR_PTR(-EBUSY);
++ }
++ ssc->user++;
++ spin_unlock(&user_lock);
+
-+ if (atmel_pri.Features & 0x01) /* chip erase supported */
-+ features |= (1<<0);
-+ if (atmel_pri.Features & 0x02) /* erase suspend supported */
-+ features |= (1<<1);
-+ if (atmel_pri.Features & 0x04) /* program suspend supported */
-+ features |= (1<<2);
-+ if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
-+ features |= (1<<9);
-+ if (atmel_pri.Features & 0x20) /* page mode read supported */
-+ features |= (1<<7);
-+ if (atmel_pri.Features & 0x40) /* queued erase supported */
-+ features |= (1<<4);
-+ if (atmel_pri.Features & 0x80) /* Protection bits supported */
-+ features |= (1<<6);
++ clk_enable(ssc->clk);
+
-+ extp->FeatureSupport = features;
++ return ssc;
++}
++EXPORT_SYMBOL(ssc_request);
+
-+ /* burst write mode not supported */
-+ cfi->cfiq->BufWriteTimeoutTyp = 0;
-+ cfi->cfiq->BufWriteTimeoutMax = 0;
++void ssc_free(struct ssc_device *ssc)
++{
++ spin_lock(&user_lock);
++ if (ssc->user) {
++ ssc->user--;
++ clk_disable(ssc->clk);
++ } else {
++ dev_dbg(&ssc->pdev->dev, "device already free\n");
++ }
++ spin_unlock(&user_lock);
+}
++EXPORT_SYMBOL(ssc_free);
+
- #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
- /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
- static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
-@@ -233,6 +275,7 @@ static void fixup_use_powerup_lock(struct mtd_info *mtd, void *param)
- }
++static int __init ssc_probe(struct platform_device *pdev)
++{
++ int retval = 0;
++ struct resource *regs;
++ struct ssc_device *ssc;
++
++ ssc = kzalloc(sizeof(struct ssc_device), GFP_KERNEL);
++ if (!ssc) {
++ dev_dbg(&pdev->dev, "out of memory\n");
++ retval = -ENOMEM;
++ goto out;
++ }
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs) {
++ dev_dbg(&pdev->dev, "no mmio resource defined\n");
++ retval = -ENXIO;
++ goto out_free;
++ }
++
++ ssc->clk = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(ssc->clk)) {
++ dev_dbg(&pdev->dev, "no pclk clock defined\n");
++ retval = -ENXIO;
++ goto out_free;
++ }
++
++ ssc->pdev = pdev;
++ ssc->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!ssc->regs) {
++ dev_dbg(&pdev->dev, "ioremap failed\n");
++ retval = -EINVAL;
++ goto out_clk;
++ }
++
++ /* disable all interrupts */
++ clk_enable(ssc->clk);
++ ssc_writel(ssc->regs, IDR, ~0UL);
++ ssc_readl(ssc->regs, SR);
++ clk_disable(ssc->clk);
++
++ ssc->irq = platform_get_irq(pdev, 0);
++ if (!ssc->irq) {
++ dev_dbg(&pdev->dev, "could not get irq\n");
++ retval = -ENXIO;
++ goto out_unmap;
++ }
++
++ spin_lock(&user_lock);
++ list_add_tail(&ssc->list, &ssc_list);
++ spin_unlock(&user_lock);
++
++ platform_set_drvdata(pdev, ssc);
++
++ dev_info(&pdev->dev, "Atmel SSC device at 0x%p (irq %d)\n",
++ ssc->regs, ssc->irq);
++
++ goto out;
++
++out_unmap:
++ iounmap(ssc->regs);
++out_clk:
++ clk_put(ssc->clk);
++out_free:
++ kfree(ssc);
++out:
++ return retval;
++}
++
++static int __devexit ssc_remove(struct platform_device *pdev)
++{
++ struct ssc_device *ssc = platform_get_drvdata(pdev);
++
++ spin_lock(&user_lock);
++ iounmap(ssc->regs);
++ clk_put(ssc->clk);
++ list_del(&ssc->list);
++ kfree(ssc);
++ spin_unlock(&user_lock);
++
++ return 0;
++}
++
++static struct platform_driver ssc_driver = {
++ .remove = __devexit_p(ssc_remove),
++ .driver = {
++ .name = "ssc",
++ },
++};
++
++static int __init ssc_init(void)
++{
++ return platform_driver_probe(&ssc_driver, ssc_probe);
++}
++module_init(ssc_init);
++
++static void __exit ssc_exit(void)
++{
++ platform_driver_unregister(&ssc_driver);
++}
++module_exit(ssc_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("SSC driver for Atmel AVR32 and AT91");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.22.1/drivers/misc/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/misc/Makefile (revision 1)
++++ linux-2.6.22.1/drivers/misc/Makefile (arbetskopia)
+@@ -14,3 +14,4 @@
+ obj-$(CONFIG_SGI_IOC4) += ioc4.o
+ obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
+ obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o
++obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
+Index: linux-2.6.22.1/drivers/rtc/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/rtc/Kconfig (revision 1)
++++ linux-2.6.22.1/drivers/rtc/Kconfig (arbetskopia)
+@@ -379,6 +379,13 @@
+ To compile this driver as a module, choose M here: the
+ module will be called rtc-pl031.
- static struct cfi_fixup cfi_fixup_table[] = {
-+ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
- { CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
- #endif
-diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
-index 1f64458..205977b 100644
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -185,6 +185,10 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
- extp->TopBottom = 2;
- else
- extp->TopBottom = 3;
++config RTC_DRV_AT32AP700X
++ tristate "AT32AP700X series RTC"
++ depends on RTC_CLASS && PLATFORM_AT32AP
++ help
++ Driver for the internal RTC (Realtime Clock) on Atmel AVR32
++ AT32AP700x family processors.
+
-+ /* burst write mode not supported */
-+ cfi->cfiq->BufWriteTimeoutTyp = 0;
-+ cfi->cfiq->BufWriteTimeoutMax = 0;
- }
+ config RTC_DRV_AT91RM9200
+ tristate "AT91RM9200"
+ depends on RTC_CLASS && ARCH_AT91RM9200
+Index: linux-2.6.22.1/drivers/rtc/rtc-at32ap700x.c
+===================================================================
+--- linux-2.6.22.1/drivers/rtc/rtc-at32ap700x.c (revision 0)
++++ linux-2.6.22.1/drivers/rtc/rtc-at32ap700x.c (revision 0)
+@@ -0,0 +1,317 @@
++/*
++ * An RTC driver for the AVR32 AT32AP700x processor series.
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/rtc.h>
++#include <linux/io.h>
++
++/*
++ * This is a bare-bones RTC. It runs during most system sleep states, but has
++ * no battery backup and gets reset during system restart. It must be
++ * initialized from an external clock (network, I2C, etc) before it can be of
++ * much use.
++ *
++ * The alarm functionality is limited by the hardware, not supporting
++ * periodic interrupts.
++ */
++
++#define RTC_CTRL 0x00
++#define RTC_CTRL_EN 0
++#define RTC_CTRL_PCLR 1
++#define RTC_CTRL_TOPEN 2
++#define RTC_CTRL_PSEL 8
++
++#define RTC_VAL 0x04
++
++#define RTC_TOP 0x08
++
++#define RTC_IER 0x10
++#define RTC_IER_TOPI 0
++
++#define RTC_IDR 0x14
++#define RTC_IDR_TOPI 0
++
++#define RTC_IMR 0x18
++#define RTC_IMR_TOPI 0
++
++#define RTC_ISR 0x1c
++#define RTC_ISR_TOPI 0
++
++#define RTC_ICR 0x20
++#define RTC_ICR_TOPI 0
++
++#define RTC_BIT(name) (1 << RTC_##name)
++#define RTC_BF(name, value) ((value) << RTC_##name)
++
++#define rtc_readl(dev, reg) \
++ __raw_readl((dev)->regs + RTC_##reg)
++#define rtc_writel(dev, reg, value) \
++ __raw_writel((value), (dev)->regs + RTC_##reg)
++
++struct rtc_at32ap700x {
++ struct rtc_device *rtc;
++ void __iomem *regs;
++ unsigned long alarm_time;
++ unsigned long irq;
++ /* Protect against concurrent register access. */
++ spinlock_t lock;
++};
++
++static int at32_rtc_readtime(struct device *dev, struct rtc_time *tm)
++{
++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++ unsigned long now;
++
++ now = rtc_readl(rtc, VAL);
++ rtc_time_to_tm(now, tm);
++
++ return 0;
++}
++
++static int at32_rtc_settime(struct device *dev, struct rtc_time *tm)
++{
++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++ unsigned long now;
++ int ret;
++
++ ret = rtc_tm_to_time(tm, &now);
++ if (ret == 0)
++ rtc_writel(rtc, VAL, now);
++
++ return ret;
++}
++
++static int at32_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++
++ rtc_time_to_tm(rtc->alarm_time, &alrm->time);
++ alrm->pending = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0;
++
++ return 0;
++}
++
++static int at32_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++ unsigned long rtc_unix_time;
++ unsigned long alarm_unix_time;
++ int ret;
++
++ rtc_unix_time = rtc_readl(rtc, VAL);
++
++ ret = rtc_tm_to_time(&alrm->time, &alarm_unix_time);
++ if (ret)
++ return ret;
++
++ if (alarm_unix_time < rtc_unix_time)
++ return -EINVAL;
++
++ spin_lock_irq(&rtc->lock);
++ rtc->alarm_time = alarm_unix_time;
++ rtc_writel(rtc, TOP, rtc->alarm_time);
++ if (alrm->pending)
++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++ | RTC_BIT(CTRL_TOPEN));
++ else
++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++ & ~RTC_BIT(CTRL_TOPEN));
++ spin_unlock_irq(&rtc->lock);
++
++ return ret;
++}
++
++static int at32_rtc_ioctl(struct device *dev, unsigned int cmd,
++ unsigned long arg)
++{
++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++ int ret = 0;
++
++ spin_lock_irq(&rtc->lock);
++
++ switch (cmd) {
++ case RTC_AIE_ON:
++ if (rtc_readl(rtc, VAL) > rtc->alarm_time) {
++ ret = -EINVAL;
++ break;
++ }
++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++ | RTC_BIT(CTRL_TOPEN));
++ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
++ rtc_writel(rtc, IER, RTC_BIT(IER_TOPI));
++ break;
++ case RTC_AIE_OFF:
++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++ & ~RTC_BIT(CTRL_TOPEN));
++ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
++ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
++ break;
++ default:
++ ret = -ENOIOCTLCMD;
++ break;
++ }
++
++ spin_unlock_irq(&rtc->lock);
++
++ return ret;
++}
++
++static irqreturn_t at32_rtc_interrupt(int irq, void *dev_id)
++{
++ struct rtc_at32ap700x *rtc = (struct rtc_at32ap700x *)dev_id;
++ unsigned long isr = rtc_readl(rtc, ISR);
++ unsigned long events = 0;
++ int ret = IRQ_NONE;
++
++ spin_lock(&rtc->lock);
++
++ if (isr & RTC_BIT(ISR_TOPI)) {
++ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
++ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++ & ~RTC_BIT(CTRL_TOPEN));
++ rtc_writel(rtc, VAL, rtc->alarm_time);
++ events = RTC_AF | RTC_IRQF;
++ rtc_update_irq(rtc->rtc, 1, events);
++ ret = IRQ_HANDLED;
++ }
++
++ spin_unlock(&rtc->lock);
++
++ return ret;
++}
++
++static struct rtc_class_ops at32_rtc_ops = {
++ .ioctl = at32_rtc_ioctl,
++ .read_time = at32_rtc_readtime,
++ .set_time = at32_rtc_settime,
++ .read_alarm = at32_rtc_readalarm,
++ .set_alarm = at32_rtc_setalarm,
++};
++
++static int __init at32_rtc_probe(struct platform_device *pdev)
++{
++ struct resource *regs;
++ struct rtc_at32ap700x *rtc;
++ int irq = -1;
++ int ret;
++
++ rtc = kzalloc(sizeof(struct rtc_at32ap700x), GFP_KERNEL);
++ if (!rtc) {
++ dev_dbg(&pdev->dev, "out of memory\n");
++ return -ENOMEM;
++ }
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs) {
++ dev_dbg(&pdev->dev, "no mmio resource defined\n");
++ ret = -ENXIO;
++ goto out;
++ }
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0) {
++ dev_dbg(&pdev->dev, "could not get irq\n");
++ ret = -ENXIO;
++ goto out;
++ }
++
++ ret = request_irq(irq, at32_rtc_interrupt, IRQF_SHARED, "rtc", rtc);
++ if (ret) {
++ dev_dbg(&pdev->dev, "could not request irq %d\n", irq);
++ goto out;
++ }
++
++ rtc->irq = irq;
++ rtc->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!rtc->regs) {
++ ret = -ENOMEM;
++ dev_dbg(&pdev->dev, "could not map I/O memory\n");
++ goto out_free_irq;
++ }
++ spin_lock_init(&rtc->lock);
++
++ /*
++ * Maybe init RTC: count from zero at 1 Hz, disable wrap irq.
++ *
++ * Do not reset VAL register, as it can hold an old time
++ * from last JTAG reset.
++ */
++ if (!(rtc_readl(rtc, CTRL) & RTC_BIT(CTRL_EN))) {
++ rtc_writel(rtc, CTRL, RTC_BIT(CTRL_PCLR));
++ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
++ rtc_writel(rtc, CTRL, RTC_BF(CTRL_PSEL, 0xe)
++ | RTC_BIT(CTRL_EN));
++ }
++
++ rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
++ &at32_rtc_ops, THIS_MODULE);
++ if (IS_ERR(rtc->rtc)) {
++ dev_dbg(&pdev->dev, "could not register rtc device\n");
++ ret = PTR_ERR(rtc->rtc);
++ goto out_iounmap;
++ }
++
++ platform_set_drvdata(pdev, rtc);
++
++ dev_info(&pdev->dev, "Atmel RTC for AT32AP700x at %08lx irq %ld\n",
++ (unsigned long)rtc->regs, rtc->irq);
++
++ return 0;
++
++out_iounmap:
++ iounmap(rtc->regs);
++out_free_irq:
++ free_irq(irq, rtc);
++out:
++ kfree(rtc);
++ return ret;
++}
++
++static int __exit at32_rtc_remove(struct platform_device *pdev)
++{
++ struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev);
++
++ free_irq(rtc->irq, rtc);
++ iounmap(rtc->regs);
++ rtc_device_unregister(rtc->rtc);
++ kfree(rtc);
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++
++MODULE_ALIAS("at32ap700x_rtc");
++
++static struct platform_driver at32_rtc_driver = {
++ .remove = __exit_p(at32_rtc_remove),
++ .driver = {
++ .name = "at32ap700x_rtc",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init at32_rtc_init(void)
++{
++ return platform_driver_probe(&at32_rtc_driver, at32_rtc_probe);
++}
++module_init(at32_rtc_init);
++
++static void __exit at32_rtc_exit(void)
++{
++ platform_driver_unregister(&at32_rtc_driver);
++}
++module_exit(at32_rtc_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("Real time clock for AVR32 AT32AP700x");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.22.1/drivers/rtc/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/rtc/Makefile (revision 1)
++++ linux-2.6.22.1/drivers/rtc/Makefile (arbetskopia)
+@@ -19,6 +19,7 @@
+ obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
+ obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o
+ obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o
++obj-$(CONFIG_RTC_DRV_AT32AP700X) += rtc-at32ap700x.o
+ obj-$(CONFIG_RTC_DRV_DS1307) += rtc-ds1307.o
+ obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
+ obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o
+Index: linux-2.6.22.1/drivers/char/watchdog/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/char/watchdog/Kconfig (revision 1)
++++ linux-2.6.22.1/drivers/char/watchdog/Kconfig (arbetskopia)
+@@ -187,6 +187,26 @@
- static void fixup_use_secsi(struct mtd_info *mtd, void *param)
-@@ -217,6 +221,7 @@ static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param)
- }
+ Say N if you are unsure.
- static struct cfi_fixup cfi_fixup_table[] = {
-+ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef AMD_BOOTLOC_BUG
- { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
- #endif
-@@ -229,7 +234,6 @@ static struct cfi_fixup cfi_fixup_table[] = {
- #if !FORCE_WORD_WRITE
- { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
- #endif
-- { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- { 0, 0, NULL, NULL }
- };
- static struct cfi_fixup jedec_fixup_table[] = {
-diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
-index b49375a..b9cb56a 100644
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -191,7 +191,7 @@ config MII
- config MACB
- tristate "Atmel MACB support"
- depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
-- select MII
-+ select PHYLIB
- help
- The Atmel MACB ethernet interface is found on many AT32 and AT91
- parts. Say Y to include support for the MACB chip.
-diff --git a/drivers/net/macb.c b/drivers/net/macb.c
-index 0e04f7a..c20a585 100644
---- a/drivers/net/macb.c
-+++ b/drivers/net/macb.c
++# AVR32 Architecture
++
++config AT32AP700X_WDT
++ tristate "AT32AP700x watchdog"
++ depends on WATCHDOG && CPU_AT32AP7000
++ help
++ Watchdog timer embedded into AT32AP700x devices. This will reboot
++ your system when the timeout is reached.
++
++config AT32AP700X_WDT_TIMEOUT
++ int "Timeout value for AT32AP700x watchdog"
++ depends on AT32AP700X_WDT
++ default "2"
++ range 1 2
++ help
++ Sets the timeout value for the watchdog in AT32AP700x devices.
++ Limited by hardware to be 1 or 2 seconds.
++
++ Set to 2 seconds by default.
++
+ # X86 (i386 + ia64 + x86_64) Architecture
+
+ config ACQUIRE_WDT
+Index: linux-2.6.22.1/drivers/char/watchdog/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/char/watchdog/Makefile (revision 1)
++++ linux-2.6.22.1/drivers/char/watchdog/Makefile (arbetskopia)
+@@ -36,6 +36,9 @@
+ obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
+ obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
+
++# AVR32 Architecture
++obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
++
+ # X86 (i386 + ia64 + x86_64) Architecture
+ obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
+ obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
+Index: linux-2.6.22.1/drivers/char/watchdog/at32ap700x_wdt.c
+===================================================================
+--- linux-2.6.22.1/drivers/char/watchdog/at32ap700x_wdt.c (revision 0)
++++ linux-2.6.22.1/drivers/char/watchdog/at32ap700x_wdt.c (revision 0)
+@@ -0,0 +1,325 @@
++/*
++ * Watchdog driver for Atmel AT32AP700X devices
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/miscdevice.h>
++#include <linux/fs.h>
++#include <linux/platform_device.h>
++#include <linux/watchdog.h>
++#include <linux/uaccess.h>
++#include <linux/io.h>
++
++#define TIMEOUT_MIN 1
++#define TIMEOUT_DEFAULT CONFIG_AT32AP700X_WDT_TIMEOUT
++#define TIMEOUT_MAX 2
++
++/* Watchdog registers and write/read macro */
++#define WDT_CTRL 0x00
++#define WDT_CTRL_EN 0
++#define WDT_CTRL_PSEL 8
++#define WDT_CTRL_KEY 24
++
++#define WDT_CLR 0x04
++
++#define WDT_BIT(name) (1 << WDT_##name)
++#define WDT_BF(name,value) ((value) << WDT_##name)
++
++#define wdt_readl(dev,reg) \
++ __raw_readl((dev)->regs + WDT_##reg)
++#define wdt_writel(dev,reg,value) \
++ __raw_writel((value), (dev)->regs + WDT_##reg)
++
++struct wdt_at32ap700x {
++ void __iomem *regs;
++ int timeout;
++ int users;
++ struct miscdevice miscdev;
++};
++
++static struct wdt_at32ap700x *wdt;
++
++/*
++ * Disable the watchdog.
++ */
++static void inline at32_wdt_stop(void)
++{
++ unsigned long psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f);
++ wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55));
++ wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa));
++}
++
++/*
++ * Enable and reset the watchdog.
++ */
++static void inline at32_wdt_start(void)
++{
++ /* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
++ unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe;
++
++ wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
++ | WDT_BF(CTRL_PSEL, psel)
++ | WDT_BF(CTRL_KEY, 0x55));
++ wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
++ | WDT_BF(CTRL_PSEL, psel)
++ | WDT_BF(CTRL_KEY, 0xaa));
++}
++
++/*
++ * Pat the watchdog timer.
++ */
++static void inline at32_wdt_pat(void)
++{
++ wdt_writel(wdt, CLR, 0x42);
++}
++
++/*
++ * Watchdog device is opened, and watchdog starts running.
++ */
++static int at32_wdt_open(struct inode *inode, struct file *file)
++{
++ if (test_and_set_bit(1, &wdt->users))
++ return -EBUSY;
++
++ at32_wdt_start();
++ return nonseekable_open(inode, file);
++}
++
++/*
++ * Close the watchdog device. If CONFIG_WATCHDOG_NOWAYOUT is _not_ defined then
++ * the watchdog is also disabled.
++ */
++static int at32_wdt_close(struct inode *inode, struct file *file)
++{
++#ifndef CONFIG_WATCHDOG_NOWAYOUT
++ at32_wdt_stop();
++#endif
++ clear_bit(1, &wdt->users);
++ return 0;
++}
++
++/*
++ * Change the watchdog time interval.
++ */
++static int at32_wdt_settimeout(int time)
++{
++ /*
++ * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is
++ * 2 ^ 16 allowing up to 2 seconds timeout.
++ */
++ if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX))
++ return -EINVAL;
++
++ /*
++ * Set new watchdog time. It will be used when at32_wdt_start() is
++ * called.
++ */
++ wdt->timeout = time;
++ return 0;
++}
++
++static struct watchdog_info at32_wdt_info = {
++ .identity = "at32ap700x watchdog",
++ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
++};
++
++/*
++ * Handle commands from user-space.
++ */
++static int at32_wdt_ioctl(struct inode *inode, struct file *file,
++ unsigned int cmd, unsigned long arg)
++{
++ int ret = -ENOTTY;
++ int time;
++ void __user *argp = (void __user *)arg;
++ int __user *p = argp;
++
++ switch (cmd) {
++ case WDIOC_KEEPALIVE:
++ at32_wdt_pat();
++ ret = 0;
++ break;
++ case WDIOC_GETSUPPORT:
++ ret = copy_to_user(argp, &at32_wdt_info,
++ sizeof(at32_wdt_info)) ? -EFAULT : 0;
++ break;
++ case WDIOC_SETTIMEOUT:
++ ret = get_user(time, p);
++ if (ret)
++ break;
++ ret = at32_wdt_settimeout(time);
++ if (ret)
++ break;
++ /* Enable new time value */
++ at32_wdt_start();
++ /* fall through */
++ case WDIOC_GETTIMEOUT:
++ ret = put_user(wdt->timeout, p);
++ break;
++ case WDIOC_GETSTATUS: /* fall through */
++ case WDIOC_GETBOOTSTATUS:
++ ret = put_user(0, p);
++ break;
++ case WDIOC_SETOPTIONS:
++ ret = get_user(time, p);
++ if (ret)
++ break;
++ if (time & WDIOS_DISABLECARD)
++ at32_wdt_stop();
++ if (time & WDIOS_ENABLECARD)
++ at32_wdt_start();
++ ret = 0;
++ break;
++ }
++
++ return ret;
++}
++
++static ssize_t at32_wdt_write(struct file *file, const char *data, size_t len,
++ loff_t *ppos)
++{
++ at32_wdt_pat();
++ return len;
++}
++
++static const struct file_operations at32_wdt_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .ioctl = at32_wdt_ioctl,
++ .open = at32_wdt_open,
++ .release = at32_wdt_close,
++ .write = at32_wdt_write,
++};
++
++static int __init at32_wdt_probe(struct platform_device *pdev)
++{
++ struct resource *regs;
++ int ret;
++
++ if (wdt) {
++ dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n");
++ return -EBUSY;
++ }
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs) {
++ dev_dbg(&pdev->dev, "missing mmio resource\n");
++ return -ENXIO;
++ }
++
++ wdt = kzalloc(sizeof(struct wdt_at32ap700x), GFP_KERNEL);
++ if (!wdt) {
++ dev_dbg(&pdev->dev, "no memory for wdt structure\n");
++ return -ENOMEM;
++ }
++
++ wdt->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!wdt->regs) {
++ ret = -ENOMEM;
++ dev_dbg(&pdev->dev, "could not map I/O memory\n");
++ goto err_free;
++ }
++ wdt->users = 0;
++ wdt->miscdev.minor = WATCHDOG_MINOR;
++ wdt->miscdev.name = "watchdog";
++ wdt->miscdev.fops = &at32_wdt_fops;
++
++ if (at32_wdt_settimeout(TIMEOUT_DEFAULT)) {
++ at32_wdt_settimeout(TIMEOUT_MAX);
++ dev_dbg(&pdev->dev,
++ "default timeout invalid, set to %d sec.\n",
++ TIMEOUT_MAX);
++ }
++
++ ret = misc_register(&wdt->miscdev);
++ if (ret) {
++ dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
++ goto err_iounmap;
++ }
++
++ platform_set_drvdata(pdev, wdt);
++ wdt->miscdev.parent = &pdev->dev;
++ dev_info(&pdev->dev, "AT32AP700X WDT at 0x%p\n", wdt->regs);
++
++ return 0;
++
++err_iounmap:
++ iounmap(wdt->regs);
++err_free:
++ kfree(wdt);
++ wdt = NULL;
++ return ret;
++}
++
++static int __exit at32_wdt_remove(struct platform_device *pdev)
++{
++ if (wdt && platform_get_drvdata(pdev) == wdt) {
++ misc_deregister(&wdt->miscdev);
++ iounmap(wdt->regs);
++ kfree(wdt);
++ wdt = NULL;
++ platform_set_drvdata(pdev, NULL);
++ }
++
++ return 0;
++}
++
++static void at32_wdt_shutdown(struct platform_device *pdev)
++{
++ at32_wdt_stop();
++}
++
++#ifdef CONFIG_PM
++static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message)
++{
++ at32_wdt_stop();
++ return 0;
++}
++
++static int at32_wdt_resume(struct platform_device *pdev)
++{
++ if (wdt->users)
++ at32_wdt_start();
++ return 0;
++}
++#else
++#define at32_wdt_suspend NULL
++#define at32_wdt_resume NULL
++#endif
++
++static struct platform_driver at32_wdt_driver = {
++ .remove = __exit_p(at32_wdt_remove),
++ .suspend = at32_wdt_suspend,
++ .resume = at32_wdt_resume,
++ .driver = {
++ .name = "at32_wdt",
++ .owner = THIS_MODULE,
++ },
++ .shutdown = at32_wdt_shutdown,
++};
++
++static int __init at32_wdt_init(void)
++{
++ return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe);
++}
++module_init(at32_wdt_init);
++
++static void __exit at32_wdt_exit(void)
++{
++ platform_driver_unregister(&at32_wdt_driver);
++}
++module_exit(at32_wdt_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+Index: linux-2.6.22.1/drivers/char/at91_spi.c
+===================================================================
+--- linux-2.6.22.1/drivers/char/at91_spi.c (revision 0)
++++ linux-2.6.22.1/drivers/char/at91_spi.c (revision 0)
+@@ -0,0 +1,336 @@
++/*
++ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder)
++ *
++ * Copyright (C) SAN People (Pty) Ltd
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/dma-mapping.h>
++#include <linux/module.h>
++#include <linux/sched.h>
++#include <linux/completion.h>
++#include <linux/interrupt.h>
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++#include <linux/atmel_pdc.h>
++#include <asm/io.h>
++#include <asm/semaphore.h>
++
++#include <asm/arch/at91_spi.h>
++#include <asm/arch/board.h>
++#include <asm/arch/spi.h>
++
++#undef DEBUG_SPI
++
++static struct spi_local spi_dev[NR_SPI_DEVICES]; /* state of the SPI devices */
++static int spi_enabled = 0;
++static struct semaphore spi_lock; /* protect access to SPI bus */
++static int current_device = -1; /* currently selected SPI device */
++static struct clk *spi_clk; /* SPI clock */
++static void __iomem *spi_base; /* SPI peripheral base-address */
++
++DECLARE_COMPLETION(transfer_complete);
++
++
++#define at91_spi_read(reg) __raw_readl(spi_base + (reg))
++#define at91_spi_write(reg, val) __raw_writel((val), spi_base + (reg))
++
++
++/* ......................................................................... */
++
++/*
++ * Access and enable the SPI bus.
++ * This MUST be called before any transfers are performed.
++ */
++void spi_access_bus(short device)
++{
++ /* Ensure that requested device is valid */
++ if ((device < 0) || (device >= NR_SPI_DEVICES))
++ panic("at91_spi: spi_access_bus called with invalid device");
++
++ if (spi_enabled == 0) {
++ clk_enable(spi_clk); /* Enable Peripheral clock */
++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */
++#ifdef DEBUG_SPI
++ printk("SPI on\n");
++#endif
++ }
++ spi_enabled++;
++
++ /* Lock the SPI bus */
++ down(&spi_lock);
++ current_device = device;
++
++ /* Configure SPI bus for device */
++ at91_spi_write(AT91_SPI_MR, AT91_SPI_MSTR | AT91_SPI_MODFDIS | (spi_dev[device].pcs << 16));
++}
++
++/*
++ * Relinquish control of the SPI bus.
++ */
++void spi_release_bus(short device)
++{
++ if (device != current_device)
++ panic("at91_spi: spi_release called with invalid device");
++
++ /* Release the SPI bus */
++ current_device = -1;
++ up(&spi_lock);
++
++ spi_enabled--;
++ if (spi_enabled == 0) {
++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */
++ clk_disable(spi_clk); /* Disable Peripheral clock */
++#ifdef DEBUG_SPI
++ printk("SPI off\n");
++#endif
++ }
++}
++
++/*
++ * Perform a data transfer over the SPI bus
++ */
++int spi_transfer(struct spi_transfer_list* list)
++{
++ struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
++ int tx_size;
++
++ if (!list)
++ panic("at91_spi: spi_transfer called with NULL transfer list");
++ if (current_device == -1)
++ panic("at91_spi: spi_transfer called without acquiring bus");
++
++#ifdef DEBUG_SPI
++ printk("SPI transfer start [%i]\n", list->nr_transfers);
++#endif
++
++ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */
++ tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
++
++ /* Store transfer list */
++ device->xfers = list;
++ list->curr = 0;
++
++ /* Assume there must be at least one transfer */
++ device->tx = dma_map_single(NULL, list->tx[0], list->txlen[0], DMA_TO_DEVICE);
++ device->rx = dma_map_single(NULL, list->rx[0], list->rxlen[0], DMA_FROM_DEVICE);
++
++ /* Program PDC registers */
++ at91_spi_write(ATMEL_PDC_TPR, device->tx);
++ at91_spi_write(ATMEL_PDC_RPR, device->rx);
++ at91_spi_write(ATMEL_PDC_TCR, list->txlen[0] / tx_size);
++ at91_spi_write(ATMEL_PDC_RCR, list->rxlen[0] / tx_size);
++
++ /* Is there a second transfer? */
++ if (list->nr_transfers > 1) {
++ device->txnext = dma_map_single(NULL, list->tx[1], list->txlen[1], DMA_TO_DEVICE);
++ device->rxnext = dma_map_single(NULL, list->rx[1], list->rxlen[1], DMA_FROM_DEVICE);
++
++ /* Program Next PDC registers */
++ at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
++ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
++ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[1] / tx_size);
++ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[1] / tx_size);
++ }
++ else {
++ device->txnext = 0;
++ device->rxnext = 0;
++ at91_spi_write(ATMEL_PDC_TNCR, 0);
++ at91_spi_write(ATMEL_PDC_RNCR, 0);
++ }
++
++ // TODO: If we are doing consecutive transfers (at high speed, or
++ // small buffers), then it might be worth modifying the 'Delay between
++ // Consecutive Transfers' in the CSR registers.
++ // This is an issue if we cannot chain the next buffer fast enough
++ // in the interrupt handler.
++
++ /* Enable transmitter and receiver */
++ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN | ATMEL_PDC_TXTEN);
++
++ at91_spi_write(AT91_SPI_IER, AT91_SPI_ENDRX); /* enable buffer complete interrupt */
++ wait_for_completion(&transfer_complete);
++
++#ifdef DEBUG_SPI
++ printk("SPI transfer end\n");
++#endif
++
++ return 0;
++}
++
++/* ......................................................................... */
++
++/*
++ * Handle interrupts from the SPI controller.
++ */
++static irqreturn_t at91spi_interrupt(int irq, void *dev_id)
++{
++ unsigned int status;
++ struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
++ struct spi_transfer_list *list = device->xfers;
++
++#ifdef DEBUG_SPI
++ printk("SPI interrupt %i\n", current_device);
++#endif
++
++ if (!list)
++ panic("at91_spi: spi_interrupt with a NULL transfer list");
++
++ status = at91_spi_read(AT91_SPI_SR) & at91_spi_read(AT91_SPI_IMR); /* read status */
++
++ dma_unmap_single(NULL, device->tx, list->txlen[list->curr], DMA_TO_DEVICE);
++ dma_unmap_single(NULL, device->rx, list->rxlen[list->curr], DMA_FROM_DEVICE);
++
++ device->tx = device->txnext; /* move next transfer to current transfer */
++ device->rx = device->rxnext;
++
++ list->curr = list->curr + 1;
++ if (list->curr == list->nr_transfers) { /* all transfers complete */
++ at91_spi_write(AT91_SPI_IDR, AT91_SPI_ENDRX); /* disable interrupt */
++
++ /* Disable transmitter and receiver */
++ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
++
++ device->xfers = NULL;
++ complete(&transfer_complete);
++ }
++ else if (list->curr+1 == list->nr_transfers) { /* no more next transfers */
++ device->txnext = 0;
++ device->rxnext = 0;
++ at91_spi_write(ATMEL_PDC_TNCR, 0);
++ at91_spi_write(ATMEL_PDC_RNCR, 0);
++ }
++ else {
++ int i = (list->curr)+1;
++
++ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */
++ int tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
++
++ device->txnext = dma_map_single(NULL, list->tx[i], list->txlen[i], DMA_TO_DEVICE);
++ device->rxnext = dma_map_single(NULL, list->rx[i], list->rxlen[i], DMA_FROM_DEVICE);
++ at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
++ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
++ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[i] / tx_size);
++ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[i] / tx_size);
++ }
++ return IRQ_HANDLED;
++}
++
++/* ......................................................................... */
++
++/*
++ * Initialize the SPI controller
++ */
++static int __init at91spi_probe(struct platform_device *pdev)
++{
++ int i;
++ unsigned long scbr;
++ struct resource *res;
++
++ init_MUTEX(&spi_lock);
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res)
++ return -ENXIO;
++
++ if (!request_mem_region(res->start, res->end - res->start + 1, "at91_spi"))
++ return -EBUSY;
++
++ spi_base = ioremap(res->start, res->end - res->start + 1);
++ if (!spi_base) {
++ release_mem_region(res->start, res->end - res->start + 1);
++ return -ENOMEM;
++ }
++
++ spi_clk = clk_get(NULL, "spi_clk");
++ if (IS_ERR(spi_clk)) {
++ printk(KERN_ERR "at91_spi: no clock defined\n");
++ iounmap(spi_base);
++ release_mem_region(res->start, res->end - res->start + 1);
++ return -ENODEV;
++ }
++
++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SWRST); /* software reset of SPI controller */
++
++ /*
++ * Calculate the correct SPI baud-rate divisor.
++ */
++ scbr = clk_get_rate(spi_clk) / (2 * DEFAULT_SPI_CLK);
++ scbr = scbr + 1; /* round up */
++
++ printk(KERN_INFO "at91_spi: Baud rate set to %ld\n", clk_get_rate(spi_clk) / (2 * scbr));
++
++ /* Set Chip Select registers to good defaults */
++ for (i = 0; i < 4; i++) {
++ at91_spi_write(AT91_SPI_CSR(i), AT91_SPI_CPOL | AT91_SPI_BITS_8 | (16 << 16) | (scbr << 8));
++ }
++
++ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
++
++ memset(&spi_dev, 0, sizeof(spi_dev));
++ spi_dev[0].pcs = 0xE;
++ spi_dev[1].pcs = 0xD;
++ spi_dev[2].pcs = 0xB;
++ spi_dev[3].pcs = 0x7;
++
++ if (request_irq(AT91RM9200_ID_SPI, at91spi_interrupt, 0, "spi", NULL)) {
++ clk_put(spi_clk);
++ iounmap(spi_base);
++ release_mem_region(res->start, res->end - res->start + 1);
++ return -EBUSY;
++ }
++
++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */
++
++ return 0;
++}
++
++static int __devexit at91spi_remove(struct platform_device *pdev)
++{
++ struct resource *res;
++
++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */
++ clk_put(spi_clk);
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ iounmap(spi_base);
++ release_mem_region(res->start, res->end - res->start + 1);
++
++ free_irq(AT91RM9200_ID_SPI, 0);
++ return 0;
++}
++
++static struct platform_driver at91spi_driver = {
++ .probe = at91spi_probe,
++ .remove = __devexit_p(at91spi_remove),
++ .driver = {
++ .name = "at91_spi",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init at91spi_init(void)
++{
++ return platform_driver_register(&at91spi_driver);
++}
++
++static void __exit at91spi_exit(void)
++{
++ platform_driver_unregister(&at91spi_driver);
++}
++
++EXPORT_SYMBOL(spi_access_bus);
++EXPORT_SYMBOL(spi_release_bus);
++EXPORT_SYMBOL(spi_transfer);
++
++module_init(at91spi_init);
++module_exit(at91spi_exit);
++
++MODULE_LICENSE("GPL")
++MODULE_AUTHOR("Andrew Victor")
++MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200")
+Index: linux-2.6.22.1/drivers/char/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/char/Kconfig (revision 1)
++++ linux-2.6.22.1/drivers/char/Kconfig (arbetskopia)
+@@ -1083,5 +1083,21 @@
+
+ source "drivers/s390/char/Kconfig"
+
++config AT91_SPI
++ bool "SPI driver (legacy) for AT91RM9200 processors"
++ depends on ARCH_AT91RM9200
++ default y
++ help
++ The SPI driver gives access to this serial bus on the AT91RM9200
++ processor.
++
++config AT91_SPIDEV
++ bool "SPI device interface (legacy) for AT91RM9200 processors"
++ depends on ARCH_AT91RM9200 && AT91_SPI
++ default n
++ help
++ The SPI driver gives user mode access to this serial
++ bus on the AT91RM9200 processor.
++
+ endmenu
+
+Index: linux-2.6.22.1/drivers/char/at91_spidev.c
+===================================================================
+--- linux-2.6.22.1/drivers/char/at91_spidev.c (revision 0)
++++ linux-2.6.22.1/drivers/char/at91_spidev.c (revision 0)
+@@ -0,0 +1,236 @@
++/*
++ * User-space interface to the SPI bus on Atmel AT91RM9200
++ *
++ * Copyright (C) 2003 SAN People (Pty) Ltd
++ *
++ * Based on SPI driver by Rick Bronson
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/highmem.h>
++#include <linux/pagemap.h>
++#include <asm/arch/spi.h>
++
++#ifdef CONFIG_DEVFS_FS
++#include <linux/devfs_fs_kernel.h>
++#endif
++
++
++#undef DEBUG_SPIDEV
++
++/* ......................................................................... */
++
++/*
++ * Read or Write to SPI bus.
++ */
++static ssize_t spidev_rd_wr(struct file *file, char *buf, size_t count, loff_t *offset)
++{
++ unsigned int spi_device = (unsigned int) file->private_data;
++
++ struct mm_struct * mm;
++ struct page ** maplist;
++ struct spi_transfer_list* list;
++ int pgcount;
++
++ unsigned int ofs, pagelen;
++ int res, i, err;
++
++ if (!count) {
++ return 0;
++ }
++
++ list = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
++ if (!list) {
++ return -ENOMEM;
++ }
++
++ mm = current->mm;
++
++ pgcount = ((unsigned long)buf+count+PAGE_SIZE-1)/PAGE_SIZE - (unsigned long)buf/PAGE_SIZE;
++
++ if (pgcount >= MAX_SPI_TRANSFERS) {
++ kfree(list);
++ return -EFBIG;
++ }
++
++ maplist = kmalloc (pgcount * sizeof (struct page *), GFP_KERNEL);
++
++ if (!maplist) {
++ kfree(list);
++ return -ENOMEM;
++ }
++ flush_cache_all();
++ down_read(&mm->mmap_sem);
++ err= get_user_pages(current, mm, (unsigned long)buf, pgcount, 1, 0, maplist, NULL);
++ up_read(&mm->mmap_sem);
++
++ if (err < 0) {
++ kfree(list);
++ kfree(maplist);
++ return err;
++ }
++ pgcount = err;
++
++#ifdef DEBUG_SPIDEV
++ printk("spidev_rd_rw: %i %i\n", count, pgcount);
++#endif
++
++ /* Set default return value = transfer length */
++ res = count;
++
++ /*
++ * At this point, the virtual area buf[0] .. buf[count-1] will have
++ * corresponding pages mapped in the physical memory and locked until
++ * we unmap the kiobuf. The pages cannot be swapped out or moved
++ * around.
++ */
++ ofs = (unsigned long) buf & (PAGE_SIZE -1);
++ pagelen = PAGE_SIZE - ofs;
++ if (count < pagelen)
++ pagelen = count;
++
++ for (i = 0; i < pgcount; i++) {
++ flush_dcache_page(maplist[i]);
++
++ list->tx[i] = list->rx[i] = page_address(maplist[i]) + ofs;
++ list->txlen[i] = list->rxlen[i] = pagelen;
++
++#ifdef DEBUG_SPIDEV
++ printk(" %i: %x (%i)\n", i, list->tx[i], list->txlen[i]);
++#endif
++
++ ofs = 0; /* all subsequent transfers start at beginning of a page */
++ count = count - pagelen;
++ pagelen = (count < PAGE_SIZE) ? count : PAGE_SIZE;
++ }
++ list->nr_transfers = pgcount;
++
++ /* Perform transfer on SPI bus */
++ spi_access_bus(spi_device);
++ spi_transfer(list);
++ spi_release_bus(spi_device);
++
++ while (pgcount--) {
++ page_cache_release (maplist[pgcount]);
++ }
++ flush_cache_all();
++
++ kfree(maplist);
++ kfree(list);
++
++ return res;
++}
++
++static int spidev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
++{
++ int spi_device = MINOR(inode->i_rdev);
++
++ if (spi_device >= NR_SPI_DEVICES)
++ return -ENODEV;
++
++ // TODO: This interface can be used to configure the SPI bus.
++ // Configurable options could include: Speed, Clock Polarity, Clock Phase
++
++ switch(cmd) {
++ default:
++ return -ENOIOCTLCMD;
++ }
++}
++
++/*
++ * Open the SPI device
++ */
++static int spidev_open(struct inode *inode, struct file *file)
++{
++ unsigned int spi_device = MINOR(inode->i_rdev);
++
++ if (spi_device >= NR_SPI_DEVICES)
++ return -ENODEV;
++
++ /*
++ * 'private_data' is actually a pointer, but we overload it with the
++ * value we want to store.
++ */
++ file->private_data = (void *)spi_device;
++
++ return 0;
++}
++
++/*
++ * Close the SPI device
++ */
++static int spidev_close(struct inode *inode, struct file *file)
++{
++ return 0;
++}
++
++/* ......................................................................... */
++
++static struct file_operations spidev_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .read = spidev_rd_wr,
++ .write = (int (*) (struct file *file, const char *buf, size_t count, loff_t *offset))spidev_rd_wr,
++ .ioctl = spidev_ioctl,
++ .open = spidev_open,
++ .release = spidev_close,
++};
++
++/*
++ * Install the SPI /dev interface driver
++ */
++static int __init at91_spidev_init(void)
++{
++#ifdef CONFIG_DEVFS_FS
++ int i;
++#endif
++
++ if (register_chrdev(SPI_MAJOR, "spi", &spidev_fops)) {
++ printk(KERN_ERR "at91_spidev: Unable to get major %d for SPI bus\n", SPI_MAJOR);
++ return -EIO;
++ }
++
++#ifdef CONFIG_DEVFS_FS
++ devfs_mk_dir("spi");
++ for (i = 0; i < NR_SPI_DEVICES; i++) {
++ devfs_mk_cdev(MKDEV(SPI_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "spi/%d",i);
++ }
++#endif
++ printk(KERN_INFO "AT91 SPI driver loaded\n");
++
++ return 0;
++}
++
++/*
++ * Remove the SPI /dev interface driver
++ */
++static void __exit at91_spidev_exit(void)
++{
++#ifdef CONFIG_DEVFS_FS
++ int i;
++ for (i = 0; i < NR_SPI_DEVICES; i++) {
++ devfs_remove("spi/%d", i);
++ }
++
++ devfs_remove("spi");
++#endif
++
++ if (unregister_chrdev(SPI_MAJOR, "spi")) {
++ printk(KERN_ERR "at91_spidev: Unable to release major %d for SPI bus\n", SPI_MAJOR);
++ return;
++ }
++}
++
++module_init(at91_spidev_init);
++module_exit(at91_spidev_exit);
++
++MODULE_LICENSE("GPL")
++MODULE_AUTHOR("Andrew Victor")
++MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
+Index: linux-2.6.22.1/drivers/char/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/char/Makefile (revision 1)
++++ linux-2.6.22.1/drivers/char/Makefile (arbetskopia)
+@@ -93,6 +93,8 @@
+ obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
+ obj-$(CONFIG_GPIO_TB0219) += tb0219.o
+ obj-$(CONFIG_TELCLOCK) += tlclk.o
++obj-$(CONFIG_AT91_SPI) += at91_spi.o
++obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o
+
+ obj-$(CONFIG_WATCHDOG) += watchdog/
+ obj-$(CONFIG_MWAVE) += mwave/
+Index: linux-2.6.22.1/drivers/net/macb.c
+===================================================================
+--- linux-2.6.22.1/drivers/net/macb.c (revision 1)
++++ linux-2.6.22.1/drivers/net/macb.c (arbetskopia)
@@ -17,13 +17,14 @@
#include <linux/init.h>
#include <linux/netdevice.h>
@@ -7922,7 +19849,7 @@ index 0e04f7a..c20a585 100644
#include "macb.h"
-@@ -85,172 +86,202 @@ static void __init macb_get_hwaddr(struct macb *bp)
+@@ -85,172 +86,202 @@
memcpy(bp->dev->dev_addr, addr, sizeof(addr));
}
@@ -7988,14 +19915,14 @@ index 0e04f7a..c20a585 100644
+ u16 value)
{
- struct macb *bp = netdev_priv(dev);
--
++ struct macb *bp = bus->priv;
+
- dev_dbg(&bp->pdev->dev, "mdio_write %02x:%02x <- %04x\n",
- phy_id, location, val);
-
- mutex_lock(&bp->mdio_mutex);
- macb_enable_mdio(bp);
-+ struct macb *bp = bus->priv;
-
+-
macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
| MACB_BF(RW, MACB_MAN_WRITE)
- | MACB_BF(PHYA, phy_id)
@@ -8244,7 +20171,7 @@ index 0e04f7a..c20a585 100644
}
static void macb_update_stats(struct macb *bp)
-@@ -265,16 +296,6 @@ static void macb_update_stats(struct macb *bp)
+@@ -265,16 +296,6 @@
*p += __raw_readl(reg);
}
@@ -8261,7 +20188,7 @@ index 0e04f7a..c20a585 100644
static void macb_tx(struct macb *bp)
{
unsigned int tail;
-@@ -519,9 +540,6 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
+@@ -519,9 +540,6 @@
spin_lock(&bp->lock);
while (status) {
@@ -8271,7 +20198,7 @@ index 0e04f7a..c20a585 100644
/* close possible race with dev_close */
if (unlikely(!netif_running(dev))) {
macb_writel(bp, IDR, ~0UL);
-@@ -535,7 +553,8 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
+@@ -535,7 +553,8 @@
* until we have processed the buffers
*/
macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
@@ -8281,7 +20208,7 @@ index 0e04f7a..c20a585 100644
__netif_rx_schedule(dev);
}
}
-@@ -765,7 +784,7 @@ static void macb_init_hw(struct macb *bp)
+@@ -765,7 +784,7 @@
macb_writel(bp, TBQP, bp->tx_ring_dma);
/* Enable TX and RX */
@@ -8290,7 +20217,7 @@ index 0e04f7a..c20a585 100644
/* Enable interrupts */
macb_writel(bp, IER, (MACB_BIT(RCOMP)
-@@ -776,18 +795,126 @@ static void macb_init_hw(struct macb *bp)
+@@ -776,20 +795,128 @@
| MACB_BIT(TCOMP)
| MACB_BIT(ISR_ROVR)
| MACB_BIT(HRESP)));
@@ -8365,8 +20292,14 @@ index 0e04f7a..c20a585 100644
+ struct dev_mc_list *curr;
+ unsigned long mc_filter[2];
+ unsigned int i, bitnr;
-+ struct macb *bp = netdev_priv(dev);
-+
+ struct macb *bp = netdev_priv(dev);
+
+- /* Set some reasonable default settings */
+- macb_mdio_write(dev, bp->mii.phy_id, MII_ADVERTISE,
+- ADVERTISE_CSMA | ADVERTISE_ALL);
+- macb_mdio_write(dev, bp->mii.phy_id, MII_BMCR,
+- (BMCR_SPEED100 | BMCR_ANENABLE
+- | BMCR_ANRESTART | BMCR_FULLDPLX));
+ mc_filter[0] = mc_filter[1] = 0;
+
+ curr = dev->mc_list;
@@ -8379,22 +20312,16 @@ index 0e04f7a..c20a585 100644
+
+ macb_writel(bp, HRB, mc_filter[0]);
+ macb_writel(bp, HRT, mc_filter[1]);
-+}
-+
+ }
+
+/*
+ * Enable/Disable promiscuous and multicast modes.
+ */
+static void macb_set_rx_mode(struct net_device *dev)
+{
+ unsigned long cfg;
- struct macb *bp = netdev_priv(dev);
-
-- /* Set some reasonable default settings */
-- macb_mdio_write(dev, bp->mii.phy_id, MII_ADVERTISE,
-- ADVERTISE_CSMA | ADVERTISE_ALL);
-- macb_mdio_write(dev, bp->mii.phy_id, MII_BMCR,
-- (BMCR_SPEED100 | BMCR_ANENABLE
-- | BMCR_ANRESTART | BMCR_FULLDPLX));
++ struct macb *bp = netdev_priv(dev);
++
+ cfg = macb_readl(bp, NCFGR);
+
+ if (dev->flags & IFF_PROMISC)
@@ -8421,10 +20348,12 @@ index 0e04f7a..c20a585 100644
+ }
+
+ macb_writel(bp, NCFGR, cfg);
- }
-
++}
++
static int macb_open(struct net_device *dev)
-@@ -797,6 +924,10 @@ static int macb_open(struct net_device *dev)
+ {
+ struct macb *bp = netdev_priv(dev);
+@@ -797,6 +924,10 @@
dev_dbg(&bp->pdev->dev, "open\n");
@@ -8435,23 +20364,24 @@ index 0e04f7a..c20a585 100644
if (!is_valid_ether_addr(dev->dev_addr))
return -EADDRNOTAVAIL;
-@@ -810,12 +941,11 @@ static int macb_open(struct net_device *dev)
+@@ -810,13 +941,12 @@
macb_init_rings(bp);
macb_init_hw(bp);
- macb_init_phy(dev);
- macb_check_media(bp, 1, 1);
-- netif_start_queue(dev);
+ /* schedule a link state check */
+ phy_start(bp->phy_dev);
++
+ netif_start_queue(dev);
- schedule_delayed_work(&bp->periodic_task, HZ);
-+ netif_start_queue(dev);
-
+-
return 0;
}
-@@ -825,10 +955,11 @@ static int macb_close(struct net_device *dev)
+
+@@ -825,10 +955,11 @@
struct macb *bp = netdev_priv(dev);
unsigned long flags;
@@ -8465,7 +20395,7 @@ index 0e04f7a..c20a585 100644
spin_lock_irqsave(&bp->lock, flags);
macb_reset_hw(bp);
netif_carrier_off(dev);
-@@ -845,6 +976,9 @@ static struct net_device_stats *macb_get_stats(struct net_device *dev)
+@@ -845,6 +976,9 @@
struct net_device_stats *nstat = &bp->stats;
struct macb_stats *hwstat = &bp->hw_stats;
@@ -8475,7 +20405,7 @@ index 0e04f7a..c20a585 100644
/* Convert HW stats into netdevice stats */
nstat->rx_errors = (hwstat->rx_fcs_errors +
hwstat->rx_align_errors +
-@@ -882,18 +1016,27 @@ static struct net_device_stats *macb_get_stats(struct net_device *dev)
+@@ -882,18 +1016,27 @@
static int macb_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct macb *bp = netdev_priv(dev);
@@ -8506,7 +20436,7 @@ index 0e04f7a..c20a585 100644
{
struct macb *bp = netdev_priv(dev);
-@@ -902,104 +1045,34 @@ static void macb_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *inf
+@@ -902,104 +1045,34 @@
strcpy(info->bus_info, bp->pdev->dev.bus_id);
}
@@ -8534,7 +20464,9 @@ index 0e04f7a..c20a585 100644
- return generic_mii_ioctl(&bp->mii, if_mii(rq), cmd, NULL);
-}
--
++ if (!phydev)
++ return -ENODEV;
+
-static ssize_t macb_mii_show(const struct device *_dev, char *buf,
- unsigned long addr)
-{
@@ -8549,8 +20481,9 @@ index 0e04f7a..c20a585 100644
- }
-
- return ret;
--}
--
++ return phy_mii_ioctl(phydev, if_mii(rq), cmd);
+ }
+
-#define MII_ENTRY(name, addr) \
-static ssize_t show_##name(struct device *_dev, \
- struct device_attribute *attr, \
@@ -8587,13 +20520,10 @@ index 0e04f7a..c20a585 100644
-static void macb_unregister_sysfs(struct net_device *net)
-{
- struct device *_dev = &net->dev;
-+ if (!phydev)
-+ return -ENODEV;
-
+-
- sysfs_remove_group(&_dev->kobj, &macb_mii_group);
-+ return phy_mii_ioctl(phydev, if_mii(rq), cmd);
- }
-
+-}
+-
-static int macb_register_sysfs(struct net_device *net)
-{
- struct device *_dev = &net->dev;
@@ -8616,7 +20546,7 @@ index 0e04f7a..c20a585 100644
unsigned long pclk_hz;
u32 config;
int err = -ENXIO;
-@@ -1073,6 +1146,7 @@ static int __devinit macb_probe(struct platform_device *pdev)
+@@ -1073,6 +1146,7 @@
dev->stop = macb_close;
dev->hard_start_xmit = macb_start_xmit;
dev->get_stats = macb_get_stats;
@@ -8624,7 +20554,7 @@ index 0e04f7a..c20a585 100644
dev->do_ioctl = macb_ioctl;
dev->poll = macb_poll;
dev->weight = 64;
-@@ -1080,10 +1154,6 @@ static int __devinit macb_probe(struct platform_device *pdev)
+@@ -1080,10 +1154,6 @@
dev->base_addr = regs->start;
@@ -8635,7 +20565,7 @@ index 0e04f7a..c20a585 100644
/* Set MII management clock divider */
pclk_hz = clk_get_rate(bp->pclk);
if (pclk_hz <= 20000000)
-@@ -1096,20 +1166,9 @@ static int __devinit macb_probe(struct platform_device *pdev)
+@@ -1096,20 +1166,9 @@
config = MACB_BF(CLK, MACB_CLK_DIV64);
macb_writel(bp, NCFGR, config);
@@ -8651,27 +20581,27 @@ index 0e04f7a..c20a585 100644
- dev_err(&pdev->dev, "Failed to detect PHY, aborting.\n");
- goto err_out_free_irq;
- }
--
- pdata = pdev->dev.platform_data;
-+
++ pdata = pdev->dev.platform_data;
+
+- pdata = pdev->dev.platform_data;
if (pdata && pdata->is_rmii)
#if defined(CONFIG_ARCH_AT91)
macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) );
-@@ -1131,9 +1190,11 @@ static int __devinit macb_probe(struct platform_device *pdev)
+@@ -1131,18 +1190,27 @@
goto err_out_free_irq;
}
-- platform_set_drvdata(pdev, dev);
+ if (macb_mii_init(bp) != 0) {
+ goto err_out_unregister_netdev;
+ }
++
+ platform_set_drvdata(pdev, dev);
- macb_register_sysfs(dev);
-+ platform_set_drvdata(pdev, dev);
-
+-
printk(KERN_INFO "%s: Atmel MACB at 0x%08lx irq %d "
"(%02x:%02x:%02x:%02x:%02x:%02x)\n",
-@@ -1141,8 +1202,15 @@ static int __devinit macb_probe(struct platform_device *pdev)
+ dev->name, dev->base_addr, dev->irq,
dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
@@ -8687,7 +20617,7 @@ index 0e04f7a..c20a585 100644
err_out_free_irq:
free_irq(dev->irq, dev);
err_out_iounmap:
-@@ -1153,7 +1221,9 @@ err_out_disable_clocks:
+@@ -1153,7 +1221,9 @@
clk_put(bp->hclk);
#endif
clk_disable(bp->pclk);
@@ -8697,7 +20627,7 @@ index 0e04f7a..c20a585 100644
clk_put(bp->pclk);
err_out_free_dev:
free_netdev(dev);
-@@ -1171,7 +1241,8 @@ static int __devexit macb_remove(struct platform_device *pdev)
+@@ -1171,7 +1241,8 @@
if (dev) {
bp = netdev_priv(dev);
@@ -8707,11 +20637,11 @@ index 0e04f7a..c20a585 100644
unregister_netdev(dev);
free_irq(dev->irq, dev);
iounmap(bp->regs);
-diff --git a/drivers/net/macb.h b/drivers/net/macb.h
-index b3bb218..4e3283e 100644
---- a/drivers/net/macb.h
-+++ b/drivers/net/macb.h
-@@ -383,11 +383,11 @@ struct macb {
+Index: linux-2.6.22.1/drivers/net/macb.h
+===================================================================
+--- linux-2.6.22.1/drivers/net/macb.h (revision 1)
++++ linux-2.6.22.1/drivers/net/macb.h (arbetskopia)
+@@ -383,11 +383,11 @@
unsigned int rx_pending, tx_pending;
@@ -8728,448 +20658,473 @@ index b3bb218..4e3283e 100644
};
#endif /* _MACB_H */
-diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
-index 4e4c10a..6d014fb 100644
---- a/drivers/rtc/Kconfig
-+++ b/drivers/rtc/Kconfig
-@@ -379,6 +379,13 @@ config RTC_DRV_PL031
- To compile this driver as a module, choose M here: the
- module will be called rtc-pl031.
+Index: linux-2.6.22.1/drivers/net/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/net/Kconfig (revision 1)
++++ linux-2.6.22.1/drivers/net/Kconfig (arbetskopia)
+@@ -191,7 +191,7 @@
+ config MACB
+ tristate "Atmel MACB support"
+ depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
+- select MII
++ select PHYLIB
+ help
+ The Atmel MACB ethernet interface is found on many AT32 and AT91
+ parts. Say Y to include support for the MACB chip.
+Index: linux-2.6.22.1/drivers/net/arm/at91_ether.c
+===================================================================
+--- linux-2.6.22.1/drivers/net/arm/at91_ether.c (revision 1)
++++ linux-2.6.22.1/drivers/net/arm/at91_ether.c (arbetskopia)
+@@ -894,6 +894,7 @@
+ skb_reserve(skb, 2);
+ memcpy(skb_put(skb, pktlen), p_recv, pktlen);
+
++ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+ dev->last_rx = jiffies;
+ lp->stats.rx_bytes += pktlen;
+@@ -978,14 +979,22 @@
+ struct net_device *dev;
+ struct at91_private *lp;
+ unsigned int val;
+- int res;
++ struct resource *res;
++ int ret;
-+config RTC_DRV_AT32AP700X
-+ tristate "AT32AP700X series RTC"
-+ depends on RTC_CLASS && PLATFORM_AT32AP
+ dev = alloc_etherdev(sizeof(struct at91_private));
+ if (!dev)
+ return -ENOMEM;
+
+- dev->base_addr = AT91_VA_BASE_EMAC;
+- dev->irq = AT91RM9200_ID_EMAC;
++ /* Get I/O base address and IRQ */
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ free_netdev(dev);
++ return -ENODEV;
++ }
++ dev->base_addr = res->start;
++ dev->irq = platform_get_irq(pdev, 0);
++
+ SET_MODULE_OWNER(dev);
+
+ /* Install the interrupt handler */
+@@ -1058,12 +1067,12 @@
+ lp->phy_address = phy_address; /* MDI address of PHY */
+
+ /* Register the network interface */
+- res = register_netdev(dev);
+- if (res) {
++ ret = register_netdev(dev);
++ if (ret) {
+ free_irq(dev->irq, dev);
+ free_netdev(dev);
+ dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
+- return res;
++ return ret;
+ }
+
+ /* Determine current link speed */
+Index: linux-2.6.22.1/drivers/leds/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/leds/Kconfig (revision 1)
++++ linux-2.6.22.1/drivers/leds/Kconfig (arbetskopia)
+@@ -77,6 +77,13 @@
+ This option enables support for the Soekris net4801 and net4826 error
+ LED.
+
++config LEDS_AT91
++ tristate "LED support using AT91 GPIOs"
++ depends on LEDS_CLASS && ARCH_AT91 && !LEDS
+ help
-+ Driver for the internal RTC (Realtime Clock) on Atmel AVR32
-+ AT32AP700x family processors.
++ This option enables support for LEDs connected to GPIO lines
++ on AT91-based boards.
+
- config RTC_DRV_AT91RM9200
- tristate "AT91RM9200"
- depends on RTC_CLASS && ARCH_AT91RM9200
-diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
-index a1afbc2..5fb1c10 100644
---- a/drivers/rtc/Makefile
-+++ b/drivers/rtc/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o
- obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
- obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o
- obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o
-+obj-$(CONFIG_RTC_DRV_AT32AP700X) += rtc-at32ap700x.o
- obj-$(CONFIG_RTC_DRV_DS1307) += rtc-ds1307.o
- obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
- obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o
-diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c
-new file mode 100644
-index 0000000..2999214
---- /dev/null
-+++ b/drivers/rtc/rtc-at32ap700x.c
-@@ -0,0 +1,317 @@
+ config LEDS_WRAP
+ tristate "LED Support for the WRAP series LEDs"
+ depends on LEDS_CLASS && SCx200_GPIO
+@@ -95,6 +102,14 @@
+ help
+ This option enables support for the front LED on Cobalt Server
+
++config LEDS_GPIO
++ tristate "LED Support for GPIO connected LEDs"
++ depends on LEDS_CLASS && GENERIC_GPIO
++ help
++ This option enables support for the LEDs connected to GPIO
++ outputs. To be useful the particular board must have LEDs
++ and they must be connected to the GPIO lines.
++
+ comment "LED Triggers"
+
+ config LEDS_TRIGGERS
+Index: linux-2.6.22.1/drivers/leds/leds-at91.c
+===================================================================
+--- linux-2.6.22.1/drivers/leds/leds-at91.c (revision 0)
++++ linux-2.6.22.1/drivers/leds/leds-at91.c (revision 0)
+@@ -0,0 +1,140 @@
+/*
-+ * An RTC driver for the AVR32 AT32AP700x processor series.
++ * AT91 GPIO based LED driver
+ *
-+ * Copyright (C) 2007 Atmel Corporation
++ * Copyright (C) 2006 David Brownell
+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
+ */
+
-+#include <linux/module.h>
+#include <linux/kernel.h>
++#include <linux/init.h>
+#include <linux/platform_device.h>
-+#include <linux/rtc.h>
-+#include <linux/io.h>
++#include <linux/leds.h>
+
-+/*
-+ * This is a bare-bones RTC. It runs during most system sleep states, but has
-+ * no battery backup and gets reset during system restart. It must be
-+ * initialized from an external clock (network, I2C, etc) before it can be of
-+ * much use.
-+ *
-+ * The alarm functionality is limited by the hardware, not supporting
-+ * periodic interrupts.
-+ */
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
+
-+#define RTC_CTRL 0x00
-+#define RTC_CTRL_EN 0
-+#define RTC_CTRL_PCLR 1
-+#define RTC_CTRL_TOPEN 2
-+#define RTC_CTRL_PSEL 8
++static LIST_HEAD(at91_led_list); /* list of AT91 LEDs */
+
-+#define RTC_VAL 0x04
++struct at91_led {
++ struct led_classdev cdev;
++ struct list_head list;
++ struct at91_gpio_led *led_data;
++};
+
-+#define RTC_TOP 0x08
++/*
++ * Change the state of the LED.
++ */
++static void at91_led_set(struct led_classdev *cdev, enum led_brightness value)
++{
++ struct at91_led *led = container_of(cdev, struct at91_led, cdev);
++ short active = (value == LED_OFF);
+
-+#define RTC_IER 0x10
-+#define RTC_IER_TOPI 0
++ if (led->led_data->flags & 1) /* active high/low? */
++ active = !active;
++ at91_set_gpio_value(led->led_data->gpio, active);
++}
+
-+#define RTC_IDR 0x14
-+#define RTC_IDR_TOPI 0
++static int __devexit at91_led_remove(struct platform_device *pdev)
++{
++ struct at91_led *led;
+
-+#define RTC_IMR 0x18
-+#define RTC_IMR_TOPI 0
++ list_for_each_entry (led, &at91_led_list, list)
++ led_classdev_unregister(&led->cdev);
+
-+#define RTC_ISR 0x1c
-+#define RTC_ISR_TOPI 0
++#warning "Free allocated memory"
++ // TODO: Free memory. kfree(led);
+
-+#define RTC_ICR 0x20
-+#define RTC_ICR_TOPI 0
++ return 0;
++}
+
-+#define RTC_BIT(name) (1 << RTC_##name)
-+#define RTC_BF(name, value) ((value) << RTC_##name)
++static int __init at91_led_probe(struct platform_device *pdev)
++{
++ int status = 0;
++ struct at91_gpio_led *pdata = pdev->dev.platform_data;
++ unsigned nr_leds;
++ struct at91_led *led;
+
-+#define rtc_readl(dev, reg) \
-+ __raw_readl((dev)->regs + RTC_##reg)
-+#define rtc_writel(dev, reg, value) \
-+ __raw_writel((value), (dev)->regs + RTC_##reg)
++ if (!pdata)
++ return -ENODEV;
+
-+struct rtc_at32ap700x {
-+ struct rtc_device *rtc;
-+ void __iomem *regs;
-+ unsigned long alarm_time;
-+ unsigned long irq;
-+ /* Protect against concurrent register access. */
-+ spinlock_t lock;
-+};
++ nr_leds = pdata->index; /* first index stores number of LEDs */
+
-+static int at32_rtc_readtime(struct device *dev, struct rtc_time *tm)
++ while (nr_leds--) {
++ led = kzalloc(sizeof(struct at91_led), GFP_KERNEL);
++ if (!led) {
++ dev_err(&pdev->dev, "No memory for device\n");
++ status = -ENOMEM;
++ goto cleanup;
++ }
++ led->led_data = pdata;
++ led->cdev.name = pdata->name;
++ led->cdev.brightness_set = at91_led_set,
++ led->cdev.default_trigger = pdata->trigger;
++
++ status = led_classdev_register(&pdev->dev, &led->cdev);
++ if (status < 0) {
++ dev_err(&pdev->dev, "led_classdev_register failed - %d\n", status);
++cleanup:
++ at91_led_remove(pdev);
++ break;
++ }
++ list_add(&led->list, &at91_led_list);
++ pdata++;
++ }
++ return status;
++}
++
++#ifdef CONFIG_PM
++static int at91_led_suspend(struct platform_device *dev, pm_message_t state)
+{
-+ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+ unsigned long now;
++ struct at91_led *led;
+
-+ now = rtc_readl(rtc, VAL);
-+ rtc_time_to_tm(now, tm);
++ list_for_each_entry (led, &at91_led_list, list)
++ led_classdev_suspend(&led->cdev);
+
+ return 0;
+}
+
-+static int at32_rtc_settime(struct device *dev, struct rtc_time *tm)
++static int at91_led_resume(struct platform_device *dev)
+{
-+ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+ unsigned long now;
-+ int ret;
++ struct at91_led *led;
+
-+ ret = rtc_tm_to_time(tm, &now);
-+ if (ret == 0)
-+ rtc_writel(rtc, VAL, now);
++ list_for_each_entry (led, &at91_led_list, list)
++ led_classdev_resume(&led->cdev);
+
-+ return ret;
++ return 0;
+}
++#else
++#define at91_led_suspend NULL
++#define at91_led_resume NULL
++#endif
+
-+static int at32_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
-+{
-+ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+
-+ rtc_time_to_tm(rtc->alarm_time, &alrm->time);
-+ alrm->pending = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0;
++static struct platform_driver at91_led_driver = {
++ .probe = at91_led_probe,
++ .remove = __devexit_p(at91_led_remove),
++ .suspend = at91_led_suspend,
++ .resume = at91_led_resume,
++ .driver = {
++ .name = "at91_leds",
++ .owner = THIS_MODULE,
++ },
++};
+
-+ return 0;
++static int __init at91_led_init(void)
++{
++ return platform_driver_register(&at91_led_driver);
+}
++module_init(at91_led_init);
+
-+static int at32_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
++static void __exit at91_led_exit(void)
+{
-+ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+ unsigned long rtc_unix_time;
-+ unsigned long alarm_unix_time;
-+ int ret;
++ platform_driver_unregister(&at91_led_driver);
++}
++module_exit(at91_led_exit);
+
-+ rtc_unix_time = rtc_readl(rtc, VAL);
++MODULE_DESCRIPTION("AT91 GPIO LED driver");
++MODULE_AUTHOR("David Brownell");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.22.1/drivers/leds/leds-gpio.c
+===================================================================
+--- linux-2.6.22.1/drivers/leds/leds-gpio.c (revision 0)
++++ linux-2.6.22.1/drivers/leds/leds-gpio.c (revision 0)
+@@ -0,0 +1,199 @@
++/*
++ * LEDs driver for GPIOs
++ *
++ * Copyright (C) 2007 8D Technologies inc.
++ * Raphael Assenat <raph@8d.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/workqueue.h>
+
-+ ret = rtc_tm_to_time(&alrm->time, &alarm_unix_time);
-+ if (ret)
-+ return ret;
++#include <asm/gpio.h>
+
-+ if (alarm_unix_time < rtc_unix_time)
-+ return -EINVAL;
++struct gpio_led_data {
++ struct led_classdev cdev;
++ unsigned gpio;
++ struct work_struct work;
++ u8 new_level;
++ u8 can_sleep;
++ u8 active_low;
++};
+
-+ spin_lock_irq(&rtc->lock);
-+ rtc->alarm_time = alarm_unix_time;
-+ rtc_writel(rtc, TOP, rtc->alarm_time);
-+ if (alrm->pending)
-+ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+ | RTC_BIT(CTRL_TOPEN));
-+ else
-+ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+ & ~RTC_BIT(CTRL_TOPEN));
-+ spin_unlock_irq(&rtc->lock);
++static void gpio_led_work(struct work_struct *work)
++{
++ struct gpio_led_data *led_dat =
++ container_of(work, struct gpio_led_data, work);
+
-+ return ret;
++ gpio_set_value_cansleep(led_dat->gpio, led_dat->new_level);
+}
+
-+static int at32_rtc_ioctl(struct device *dev, unsigned int cmd,
-+ unsigned long arg)
++static void gpio_led_set(struct led_classdev *led_cdev,
++ enum led_brightness value)
+{
-+ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
-+ int ret = 0;
-+
-+ spin_lock_irq(&rtc->lock);
++ struct gpio_led_data *led_dat =
++ container_of(led_cdev, struct gpio_led_data, cdev);
++ int level;
+
-+ switch (cmd) {
-+ case RTC_AIE_ON:
-+ if (rtc_readl(rtc, VAL) > rtc->alarm_time) {
-+ ret = -EINVAL;
-+ break;
-+ }
-+ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+ | RTC_BIT(CTRL_TOPEN));
-+ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
-+ rtc_writel(rtc, IER, RTC_BIT(IER_TOPI));
-+ break;
-+ case RTC_AIE_OFF:
-+ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+ & ~RTC_BIT(CTRL_TOPEN));
-+ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
-+ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
-+ break;
-+ default:
-+ ret = -ENOIOCTLCMD;
-+ break;
-+ }
++ if (value == LED_OFF)
++ level = 0;
++ else
++ level = 1;
+
-+ spin_unlock_irq(&rtc->lock);
++ if (led_dat->active_low)
++ level = !level;
+
-+ return ret;
++ /* setting GPIOs with I2C/etc requires a preemptible task context */
++ if (led_dat->can_sleep) {
++ if (preempt_count()) {
++ led_dat->new_level = level;
++ schedule_work(&led_dat->work);
++ } else
++ gpio_set_value_cansleep(led_dat->gpio, level);
++ } else
++ gpio_set_value(led_dat->gpio, level);
+}
+
-+static irqreturn_t at32_rtc_interrupt(int irq, void *dev_id)
++static int __init gpio_led_probe(struct platform_device *pdev)
+{
-+ struct rtc_at32ap700x *rtc = (struct rtc_at32ap700x *)dev_id;
-+ unsigned long isr = rtc_readl(rtc, ISR);
-+ unsigned long events = 0;
-+ int ret = IRQ_NONE;
++ struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
++ struct gpio_led *cur_led;
++ struct gpio_led_data *leds_data, *led_dat;
++ int i, ret = 0;
+
-+ spin_lock(&rtc->lock);
++ if (!pdata)
++ return -EBUSY;
+
-+ if (isr & RTC_BIT(ISR_TOPI)) {
-+ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
-+ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
-+ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
-+ & ~RTC_BIT(CTRL_TOPEN));
-+ rtc_writel(rtc, VAL, rtc->alarm_time);
-+ events = RTC_AF | RTC_IRQF;
-+ rtc_update_irq(rtc->rtc, 1, events);
-+ ret = IRQ_HANDLED;
-+ }
++ leds_data = kzalloc(sizeof(struct gpio_led_data) * pdata->num_leds,
++ GFP_KERNEL);
++ if (!leds_data)
++ return -ENOMEM;
+
-+ spin_unlock(&rtc->lock);
++ for (i = 0; i < pdata->num_leds; i++) {
++ cur_led = &pdata->leds[i];
++ led_dat = &leds_data[i];
+
-+ return ret;
-+}
++ led_dat->cdev.name = cur_led->name;
++ led_dat->cdev.default_trigger = cur_led->default_trigger;
++ led_dat->gpio = cur_led->gpio;
++ led_dat->can_sleep = gpio_cansleep(cur_led->gpio);
++ led_dat->active_low = cur_led->active_low;
++ led_dat->cdev.brightness_set = gpio_led_set;
++ led_dat->cdev.brightness = cur_led->active_low ? LED_FULL : LED_OFF;
+
-+static struct rtc_class_ops at32_rtc_ops = {
-+ .ioctl = at32_rtc_ioctl,
-+ .read_time = at32_rtc_readtime,
-+ .set_time = at32_rtc_settime,
-+ .read_alarm = at32_rtc_readalarm,
-+ .set_alarm = at32_rtc_setalarm,
-+};
++ ret = gpio_request(led_dat->gpio, led_dat->cdev.name);
++ if (ret < 0)
++ goto err;
+
-+static int __init at32_rtc_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs;
-+ struct rtc_at32ap700x *rtc;
-+ int irq = -1;
-+ int ret;
++ gpio_direction_output(led_dat->gpio, led_dat->active_low);
+
-+ rtc = kzalloc(sizeof(struct rtc_at32ap700x), GFP_KERNEL);
-+ if (!rtc) {
-+ dev_dbg(&pdev->dev, "out of memory\n");
-+ return -ENOMEM;
-+ }
++ ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
++ if (ret < 0) {
++ gpio_free(led_dat->gpio);
++ goto err;
++ }
+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_dbg(&pdev->dev, "no mmio resource defined\n");
-+ ret = -ENXIO;
-+ goto out;
++ INIT_WORK(&led_dat->work, gpio_led_work);
+ }
+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_dbg(&pdev->dev, "could not get irq\n");
-+ ret = -ENXIO;
-+ goto out;
-+ }
++ platform_set_drvdata(pdev, leds_data);
+
-+ ret = request_irq(irq, at32_rtc_interrupt, IRQF_SHARED, "rtc", rtc);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "could not request irq %d\n", irq);
-+ goto out;
-+ }
++ return 0;
+
-+ rtc->irq = irq;
-+ rtc->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!rtc->regs) {
-+ ret = -ENOMEM;
-+ dev_dbg(&pdev->dev, "could not map I/O memory\n");
-+ goto out_free_irq;
++err:
++ if (i > 0) {
++ for (i = i - 1; i >= 0; i--) {
++ led_classdev_unregister(&leds_data[i].cdev);
++ gpio_free(leds_data[i].gpio);
++ }
+ }
-+ spin_lock_init(&rtc->lock);
+
-+ /*
-+ * Maybe init RTC: count from zero at 1 Hz, disable wrap irq.
-+ *
-+ * Do not reset VAL register, as it can hold an old time
-+ * from last JTAG reset.
-+ */
-+ if (!(rtc_readl(rtc, CTRL) & RTC_BIT(CTRL_EN))) {
-+ rtc_writel(rtc, CTRL, RTC_BIT(CTRL_PCLR));
-+ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
-+ rtc_writel(rtc, CTRL, RTC_BF(CTRL_PSEL, 0xe)
-+ | RTC_BIT(CTRL_EN));
-+ }
++ flush_scheduled_work();
++ kfree(leds_data);
+
-+ rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
-+ &at32_rtc_ops, THIS_MODULE);
-+ if (IS_ERR(rtc->rtc)) {
-+ dev_dbg(&pdev->dev, "could not register rtc device\n");
-+ ret = PTR_ERR(rtc->rtc);
-+ goto out_iounmap;
-+ }
++ return ret;
++}
+
-+ platform_set_drvdata(pdev, rtc);
++static int __exit gpio_led_remove(struct platform_device *pdev)
++{
++ int i;
++ struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
++ struct gpio_led_data *leds_data;
+
-+ dev_info(&pdev->dev, "Atmel RTC for AT32AP700x at %08lx irq %ld\n",
-+ (unsigned long)rtc->regs, rtc->irq);
++ leds_data = platform_get_drvdata(pdev);
+
-+ return 0;
++ for (i = 0; i < pdata->num_leds; i++) {
++ led_classdev_unregister(&leds_data[i].cdev);
++ gpio_free(leds_data[i].gpio);
++ }
++
++ kfree(leds_data);
+
-+out_iounmap:
-+ iounmap(rtc->regs);
-+out_free_irq:
-+ free_irq(irq, rtc);
-+out:
-+ kfree(rtc);
-+ return ret;
++ return 0;
+}
+
-+static int __exit at32_rtc_remove(struct platform_device *pdev)
++#ifdef CONFIG_PM
++static int gpio_led_suspend(struct platform_device *pdev, pm_message_t state)
+{
-+ struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev);
++ struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
++ struct gpio_led_data *leds_data;
++ int i;
++
++ leds_data = platform_get_drvdata(pdev);
+
-+ free_irq(rtc->irq, rtc);
-+ iounmap(rtc->regs);
-+ rtc_device_unregister(rtc->rtc);
-+ kfree(rtc);
-+ platform_set_drvdata(pdev, NULL);
++ for (i = 0; i < pdata->num_leds; i++)
++ led_classdev_suspend(&leds_data[i].cdev);
+
+ return 0;
+}
+
-+MODULE_ALIAS("at32ap700x_rtc");
++static int gpio_led_resume(struct platform_device *pdev)
++{
++ struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
++ struct gpio_led_data *leds_data;
++ int i;
+
-+static struct platform_driver at32_rtc_driver = {
-+ .remove = __exit_p(at32_rtc_remove),
++ leds_data = platform_get_drvdata(pdev);
++
++ for (i = 0; i < pdata->num_leds; i++)
++ led_classdev_resume(&leds_data[i].cdev);
++
++ return 0;
++}
++#else
++#define gpio_led_suspend NULL
++#define gpio_led_resume NULL
++#endif
++
++static struct platform_driver gpio_led_driver = {
++ .remove = __exit_p(gpio_led_remove),
++ .suspend = gpio_led_suspend,
++ .resume = gpio_led_resume,
+ .driver = {
-+ .name = "at32ap700x_rtc",
++ .name = "leds-gpio",
+ .owner = THIS_MODULE,
+ },
+};
+
-+static int __init at32_rtc_init(void)
++static int __init gpio_led_init(void)
+{
-+ return platform_driver_probe(&at32_rtc_driver, at32_rtc_probe);
++ return platform_driver_probe(&gpio_led_driver, gpio_led_probe);
+}
-+module_init(at32_rtc_init);
+
-+static void __exit at32_rtc_exit(void)
++static void __exit gpio_led_exit(void)
+{
-+ platform_driver_unregister(&at32_rtc_driver);
++ platform_driver_unregister(&gpio_led_driver);
+}
-+module_exit(at32_rtc_exit);
+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Real time clock for AVR32 AT32AP700x");
++module_init(gpio_led_init);
++module_exit(gpio_led_exit);
++
++MODULE_AUTHOR("Raphael Assenat <raph@8d.com>");
++MODULE_DESCRIPTION("GPIO LED driver");
+MODULE_LICENSE("GPL");
-diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
-index 3320bcd..4d6b3c5 100644
---- a/drivers/serial/atmel_serial.c
-+++ b/drivers/serial/atmel_serial.c
-@@ -114,6 +114,7 @@ struct atmel_uart_port {
- struct uart_port uart; /* uart */
- struct clk *clk; /* uart clock */
- unsigned short suspended; /* is port suspended? */
-+ int break_active; /* break being received */
- };
-
- static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-@@ -252,6 +253,7 @@ static void atmel_break_ctl(struct uart_port *port, int break_state)
- */
- static void atmel_rx_chars(struct uart_port *port)
- {
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- struct tty_struct *tty = port->info->tty;
- unsigned int status, ch, flg;
-
-@@ -267,13 +269,29 @@ static void atmel_rx_chars(struct uart_port *port)
- * note that the error handling code is
- * out of the main execution path
- */
-- if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
-+ if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
-+ | ATMEL_US_OVRE | ATMEL_US_RXBRK)
-+ || atmel_port->break_active)) {
- UART_PUT_CR(port, ATMEL_US_RSTSTA); /* clear error */
-- if (status & ATMEL_US_RXBRK) {
-+ if (status & ATMEL_US_RXBRK
-+ && !atmel_port->break_active) {
- status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */
- port->icount.brk++;
-+ atmel_port->break_active = 1;
-+ UART_PUT_IER(port, ATMEL_US_RXBRK);
- if (uart_handle_break(port))
- goto ignore_char;
-+ } else {
-+ /*
-+ * This is either the end-of-break
-+ * condition or we've received at
-+ * least one character without RXBRK
-+ * being set. In both cases, the next
-+ * RXBRK will indicate start-of-break.
-+ */
-+ UART_PUT_IDR(port, ATMEL_US_RXBRK);
-+ status &= ~ATMEL_US_RXBRK;
-+ atmel_port->break_active = 0;
- }
- if (status & ATMEL_US_PARE)
- port->icount.parity++;
-@@ -352,6 +370,16 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
- /* Interrupt receive */
- if (pending & ATMEL_US_RXRDY)
- atmel_rx_chars(port);
-+ else if (pending & ATMEL_US_RXBRK) {
-+ /*
-+ * End of break detected. If it came along
-+ * with a character, atmel_rx_chars will
-+ * handle it.
-+ */
-+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
-+ UART_PUT_IDR(port, ATMEL_US_RXBRK);
-+ atmel_port->break_active = 0;
-+ }
-
- // TODO: All reads to CSR will clear these interrupts!
- if (pending & ATMEL_US_RIIC) port->icount.rng++;
-diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
-index 8b2601d..8f5453f 100644
---- a/drivers/spi/atmel_spi.c
-+++ b/drivers/spi/atmel_spi.c
-@@ -412,8 +412,8 @@ static int atmel_spi_setup(struct spi_device *spi)
- csr |= SPI_BIT(NCPHA);
-
- /* TODO: DLYBS and DLYBCT */
-- csr |= SPI_BF(DLYBS, 10);
-- csr |= SPI_BF(DLYBCT, 10);
-+ csr |= SPI_BF(DLYBS, 0);
-+ csr |= SPI_BF(DLYBCT, 0);
+Index: linux-2.6.22.1/drivers/leds/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/leds/Makefile (revision 1)
++++ linux-2.6.22.1/drivers/leds/Makefile (arbetskopia)
+@@ -16,6 +16,8 @@
+ obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
+ obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
+ obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o
++obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
++obj-$(CONFIG_LEDS_AT91) += leds-at91.o
- /* chipselect must have been muxed as GPIO (e.g. in board setup) */
- npcs_pin = (unsigned int)spi->controller_data;
-diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
-index f771a7c..0c3d55b 100644
---- a/drivers/usb/gadget/Kconfig
-+++ b/drivers/usb/gadget/Kconfig
-@@ -175,6 +175,19 @@ config USB_LH7A40X
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
+Index: linux-2.6.22.1/drivers/usb/gadget/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/usb/gadget/Kconfig (revision 1)
++++ linux-2.6.22.1/drivers/usb/gadget/Kconfig (arbetskopia)
+@@ -175,7 +175,20 @@
default USB_GADGET
select USB_GADGET_SELECTED
@@ -9180,32 +21135,20 @@ index f771a7c..0c3d55b 100644
+ help
+ USBA is the integrated high-speed USB Device controller on
+ the AT32AP700x processors from Atmel.
-+
+
+config USB_ATMEL_USBA
+ tristate
+ depends on USB_GADGET_ATMEL_USBA
+ default USB_GADGET
+ select USB_GADGET_SELECTED
-
++
config USB_GADGET_OMAP
boolean "OMAP USB Device Controller"
-diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
-index 5db1939..c28da01 100644
---- a/drivers/usb/gadget/Makefile
-+++ b/drivers/usb/gadget/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_USB_GOKU) += goku_udc.o
- obj-$(CONFIG_USB_OMAP) += omap_udc.o
- obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
- obj-$(CONFIG_USB_AT91) += at91_udc.o
-+obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o
- obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
-
- #
-diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
-new file mode 100644
-index 0000000..34dbae3
---- /dev/null
-+++ b/drivers/usb/gadget/atmel_usba_udc.c
+ depends on ARCH_OMAP
+Index: linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.c
+===================================================================
+--- linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.c (revision 0)
++++ linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.c (revision 0)
@@ -0,0 +1,2072 @@
+/*
+ * Driver for the Atmel USBA high speed USB device controller
@@ -11279,11 +23222,36 @@ index 0000000..34dbae3
+MODULE_DESCRIPTION("Atmel USBA UDC driver");
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_LICENSE("GPL");
-diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
-new file mode 100644
-index 0000000..408d2ce
---- /dev/null
-+++ b/drivers/usb/gadget/atmel_usba_udc.h
+Index: linux-2.6.22.1/drivers/usb/gadget/ether.c
+===================================================================
+--- linux-2.6.22.1/drivers/usb/gadget/ether.c (revision 1)
++++ linux-2.6.22.1/drivers/usb/gadget/ether.c (arbetskopia)
+@@ -277,7 +277,7 @@
+ #define DEV_CONFIG_CDC
+ #endif
+
+-#ifdef CONFIG_USB_GADGET_HUSB2DEV
++#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+ #define DEV_CONFIG_CDC
+ #endif
+
+Index: linux-2.6.22.1/drivers/usb/gadget/at91_udc.c
+===================================================================
+--- linux-2.6.22.1/drivers/usb/gadget/at91_udc.c (revision 1)
++++ linux-2.6.22.1/drivers/usb/gadget/at91_udc.c (arbetskopia)
+@@ -1803,7 +1803,7 @@
+ */
+ if ((!udc->suspended && udc->addr)
+ || !wake
+- || at91_suspend_entering_slow_clock()) {
++ || clk_must_disable(udc->fclk)) {
+ pullup(udc, 0);
+ wake = 0;
+ } else
+Index: linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.h
+===================================================================
+--- linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.h (revision 0)
++++ linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.h (revision 0)
@@ -0,0 +1,402 @@
+/*
+ * Driver for the Atmel USBA high speed USB device controller
@@ -11687,23 +23655,10 @@ index 0000000..408d2ce
+#define ep_is_idle(ep) ((ep)->state == EP_STATE_IDLE)
+
+#endif /* __LINUX_USB_GADGET_USBA_UDC_H */
-diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
-index 325bf7c..23e874b 100644
---- a/drivers/usb/gadget/ether.c
-+++ b/drivers/usb/gadget/ether.c
-@@ -277,7 +277,7 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
- #define DEV_CONFIG_CDC
- #endif
-
--#ifdef CONFIG_USB_GADGET_HUSB2DEV
-+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
- #define DEV_CONFIG_CDC
- #endif
-
-diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
-index d041b91..96e4dbc 100644
---- a/drivers/usb/gadget/gadget_chips.h
-+++ b/drivers/usb/gadget/gadget_chips.h
+Index: linux-2.6.22.1/drivers/usb/gadget/gadget_chips.h
+===================================================================
+--- linux-2.6.22.1/drivers/usb/gadget/gadget_chips.h (revision 1)
++++ linux-2.6.22.1/drivers/usb/gadget/gadget_chips.h (arbetskopia)
@@ -75,10 +75,10 @@
#define gadget_is_pxa27x(g) 0
#endif
@@ -11718,7 +23673,7 @@ index d041b91..96e4dbc 100644
#endif
#ifdef CONFIG_USB_GADGET_S3C2410
-@@ -181,7 +181,7 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
+@@ -181,7 +181,7 @@
return 0x16;
else if (gadget_is_mpc8272(gadget))
return 0x17;
@@ -11727,10 +23682,22 @@ index d041b91..96e4dbc 100644
return 0x18;
else if (gadget_is_fsl_usb2(gadget))
return 0x19;
-diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
-index 46d0e52..855f8cc 100644
---- a/drivers/usb/gadget/inode.c
-+++ b/drivers/usb/gadget/inode.c
+Index: linux-2.6.22.1/drivers/usb/gadget/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/usb/gadget/Makefile (revision 1)
++++ linux-2.6.22.1/drivers/usb/gadget/Makefile (arbetskopia)
+@@ -8,6 +8,7 @@
+ obj-$(CONFIG_USB_OMAP) += omap_udc.o
+ obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
+ obj-$(CONFIG_USB_AT91) += at91_udc.o
++obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o
+ obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
+
+ #
+Index: linux-2.6.22.1/drivers/usb/gadget/inode.c
+===================================================================
+--- linux-2.6.22.1/drivers/usb/gadget/inode.c (revision 1)
++++ linux-2.6.22.1/drivers/usb/gadget/inode.c (arbetskopia)
@@ -37,7 +37,7 @@
#include <linux/device.h>
#include <linux/moduleparam.h>
@@ -11740,3081 +23707,869 @@ index 46d0e52..855f8cc 100644
#include <linux/usb_gadget.h>
-diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
-index 403dac7..f3e2897 100644
---- a/drivers/video/Kconfig
-+++ b/drivers/video/Kconfig
-@@ -849,6 +849,16 @@ config FB_INTSRAM
- Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
- to let frame buffer in external SDRAM.
-
-+config FB_ATMEL_STN
-+ bool "Use a STN display with AT91/AT32 LCD Controller"
-+ depends on FB_ATMEL && ARCH_AT91SAM9261
-+ default n
-+ help
-+ Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
-+ Controller. Say N if you want to connect a TFT.
-+
-+ If unsure, say N.
-+
- config FB_NVIDIA
- tristate "nVidia Framebuffer Support"
- depends on FB && PCI
-diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
-index e1d5bd0..bb361ab 100644
---- a/drivers/video/atmel_lcdfb.c
-+++ b/drivers/video/atmel_lcdfb.c
-@@ -37,7 +37,9 @@
- #endif
-
- #if defined(CONFIG_ARCH_AT91)
--#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT
-+#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
-+ | FBINFO_PARTIAL_PAN_OK \
-+ | FBINFO_HWACCEL_YPAN)
-
- static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
- struct fb_var_screeninfo *var)
-@@ -74,11 +76,34 @@ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
- .type = FB_TYPE_PACKED_PIXELS,
- .visual = FB_VISUAL_TRUECOLOR,
- .xpanstep = 0,
-- .ypanstep = 0,
-+ .ypanstep = 1,
- .ywrapstep = 0,
- .accel = FB_ACCEL_NONE,
- };
-
-+static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
-+{
-+ unsigned long value;
-+
-+ if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000()))
-+ return xres;
-+
-+ value = xres;
-+ if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) {
-+ /* STN display */
-+ if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) {
-+ value *= 3;
-+ }
-+ if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4
-+ || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8
-+ && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL ))
-+ value = DIV_ROUND_UP(value, 4);
-+ else
-+ value = DIV_ROUND_UP(value, 8);
-+ }
-+
-+ return value;
-+}
-
- static void atmel_lcdfb_update_dma(struct fb_info *info,
- struct fb_var_screeninfo *var)
-@@ -181,6 +206,7 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
- var->xoffset = var->yoffset = 0;
-
- switch (var->bits_per_pixel) {
-+ case 1:
- case 2:
- case 4:
- case 8:
-@@ -195,8 +221,11 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
- var->blue.offset = 10;
- var->red.length = var->green.length = var->blue.length = 5;
- break;
-- case 24:
- case 32:
-+ var->transp.offset = 24;
-+ var->transp.length = 8;
-+ /* fall through */
-+ case 24:
- var->red.offset = 0;
- var->green.offset = 8;
- var->blue.offset = 16;
-@@ -228,8 +257,10 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
- static int atmel_lcdfb_set_par(struct fb_info *info)
- {
- struct atmel_lcdfb_info *sinfo = info->par;
-+ unsigned long hozval_linesz;
- unsigned long value;
- unsigned long clk_value_khz;
-+ unsigned long bits_per_line;
-
- dev_dbg(info->device, "%s:\n", __func__);
- dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n",
-@@ -241,12 +272,15 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
-
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
-
-- if (info->var.bits_per_pixel <= 8)
-+ if (info->var.bits_per_pixel == 1)
-+ info->fix.visual = FB_VISUAL_MONO01;
-+ else if (info->var.bits_per_pixel <= 8)
- info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
- else
- info->fix.visual = FB_VISUAL_TRUECOLOR;
-
-- info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
-+ bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel;
-+ info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8);
-
- /* Re-initialize the DMA engine... */
- dev_dbg(info->device, " * update DMA engine\n");
-@@ -262,18 +296,21 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
- /* Set pixel clock */
- clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
-
-- value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
--
-- if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
-- value++;
-+ value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
-
- value = (value / 2) - 1;
-+ dev_dbg(info->device, " * programming CLKVAL = 0x%08lx\n", value);
-
- if (value <= 0) {
- dev_notice(info->device, "Bypassing pixel clock divider\n");
- lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
-- } else
-+ } else {
- lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
-+ info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1)));
-+ dev_dbg(info->device, " updated pixclk: %lu KHz\n",
-+ PICOS2KHZ(info->var.pixclock));
-+ }
-+
-
- /* Initialize control register 2 */
- value = sinfo->default_lcdcon2;
-@@ -311,9 +348,14 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
- dev_dbg(info->device, " * LCDTIM2 = %08lx\n", value);
- lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
-
-+ /* Horizontal value (aka line size) */
-+ hozval_linesz = compute_hozval(info->var.xres,
-+ lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2));
-+
- /* Display size */
-- value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
-+ value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
- value |= info->var.yres - 1;
-+ dev_dbg(info->device, " * LCDFRMCFG = %08lx\n", value);
- lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
-
- /* FIFO Threshold: Use formula from data sheet */
-@@ -421,6 +463,15 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
- ret = 0;
- }
- break;
-+
-+ case FB_VISUAL_MONO01:
-+ if (regno < 2) {
-+ val = (regno == 0) ? 0x00 : 0x1F;
-+ lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
-+ ret = 0;
-+ }
-+ break;
-+
+Index: linux-2.6.22.1/drivers/usb/host/ohci-at91.c
+===================================================================
+--- linux-2.6.22.1/drivers/usb/host/ohci-at91.c (revision 1)
++++ linux-2.6.22.1/drivers/usb/host/ohci-at91.c (arbetskopia)
+@@ -299,7 +299,7 @@
+ *
+ * REVISIT: some boards will be able to turn VBUS off...
+ */
+- if (at91_suspend_entering_slow_clock()) {
++ if (clk_must_disable(fclk)) {
+ ohci_usb_reset (ohci);
+ at91_stop_clock();
}
+Index: linux-2.6.22.1/drivers/i2c/busses/Kconfig
+===================================================================
+--- linux-2.6.22.1/drivers/i2c/busses/Kconfig (revision 1)
++++ linux-2.6.22.1/drivers/i2c/busses/Kconfig (arbetskopia)
+@@ -4,6 +4,26 @@
- return ret;
-diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
-index fbef663..b6f936a 100644
---- a/drivers/video/backlight/Kconfig
-+++ b/drivers/video/backlight/Kconfig
-@@ -8,26 +8,44 @@ menuconfig BACKLIGHT_LCD_SUPPORT
- Enable this to be able to choose the drivers for controlling the
- backlight and the LCD panel on some platforms, for example on PDAs.
-
--config BACKLIGHT_CLASS_DEVICE
-- tristate "Lowlevel Backlight controls"
-+#
-+# LCD
-+#
-+config LCD_CLASS_DEVICE
-+ tristate "Lowlevel LCD controls"
- depends on BACKLIGHT_LCD_SUPPORT
- default m
- help
-- This framework adds support for low-level control of the LCD
-- backlight. This includes support for brightness and power.
-+ This framework adds support for low-level control of LCD.
-+ Some framebuffer devices connect to platform-specific LCD modules
-+ in order to have a platform-specific way to control the flat panel
-+ (contrast and applying power to the LCD (not to the backlight!)).
-
- To have support for your specific LCD panel you will have to
- select the proper drivers which depend on this option.
+ menu "I2C Hardware Bus support"
--config LCD_CLASS_DEVICE
-- tristate "Lowlevel LCD controls"
-+config LCD_LTV350QV
-+ tristate "Samsung LTV350QV LCD Panel"
-+ depends on LCD_CLASS_DEVICE && SPI_MASTER
-+ default n
++config I2C_ATMELTWI
++ tristate "Atmel TWI/I2C"
++ depends on I2C
+ help
-+ If you have a Samsung LTV350QV LCD panel, say y to include a
-+ power control driver for it. The panel starts up in power
-+ off state, so you need this driver in order to see any
-+ output.
++ Atmel on-chip TWI controller. Say Y if you have an AT32 or
++ AT91-based device and want to use its built-in TWI
++ functionality. Atmel's TWI is compatible with Philips' I2C
++ protocol. If in doubt, say NO
+
-+ The LTV350QV panel is present on all ATSTK1000 boards.
++config I2C_ATMELTWI_BAUDRATE
++ prompt "Atmel TWI baudrate"
++ depends on I2C_ATMELTWI
++ int
++ default 100000
++ help
++ Set the TWI/I2C baudrate. This will alter the default value. A
++ different baudrate can be set by using a module parameter as well. If
++ no parameter is provided when loading, this is the value that will be
++ used.
+
-+#
-+# Backlight
-+#
-+config BACKLIGHT_CLASS_DEVICE
-+ tristate "Lowlevel Backlight controls"
- depends on BACKLIGHT_LCD_SUPPORT
- default m
- help
-- This framework adds support for low-level control of LCD.
-- Some framebuffer devices connect to platform-specific LCD modules
-- in order to have a platform-specific way to control the flat panel
-- (contrast and applying power to the LCD (not to the backlight!)).
-+ This framework adds support for low-level control of the LCD
-+ backlight. This includes support for brightness and power.
-
- To have support for your specific LCD panel you will have to
- select the proper drivers which depend on this option.
-diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
-index c6e2266..965a78b 100644
---- a/drivers/video/backlight/Makefile
-+++ b/drivers/video/backlight/Makefile
-@@ -1,6 +1,8 @@
- # Backlight & LCD drivers
+ config I2C_ALI1535
+ tristate "ALI 1535"
+ depends on PCI
+@@ -80,6 +100,14 @@
+ This supports the use of the I2C interface on Atmel AT91
+ processors.
- obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
-+obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
++config I2C_AT91_CLOCKRATE
++ prompt "Atmel AT91 I2C/TWI clock-rate"
++ depends on I2C_AT91
++ int
++ default 100000
++ help
++ Set the AT91 I2C/TWI clock-rate.
+
- obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
- obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
- obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
-diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c
-new file mode 100644
-index 0000000..342b97a
---- /dev/null
-+++ b/drivers/video/backlight/ltv350qv.c
-@@ -0,0 +1,340 @@
+ config I2C_AU1550
+ tristate "Au1550/Au1200 SMBus interface"
+ depends on SOC_AU1550 || SOC_AU1200
+@@ -598,6 +626,14 @@
+ This driver can also be built as a module. If so, the module
+ will be called i2c-voodoo3.
+
++config I2C_PCA
++ tristate "PCA9564"
++ depends on I2C
++ select I2C_ALGOPCA
++ help
++ This driver support the Philips PCA 9564 Parallel bus to I2C
++ bus controller.
++
+ config I2C_PCA_ISA
+ tristate "PCA9564 on an ISA bus"
+ depends on ISA
+Index: linux-2.6.22.1/drivers/i2c/busses/i2c-atmeltwi.c
+===================================================================
+--- linux-2.6.22.1/drivers/i2c/busses/i2c-atmeltwi.c (revision 0)
++++ linux-2.6.22.1/drivers/i2c/busses/i2c-atmeltwi.c (revision 0)
+@@ -0,0 +1,383 @@
+/*
-+ * Power control for Samsung LTV350QV Quarter VGA LCD Panel
++ * i2c Support for Atmel's Two-Wire Interface (TWI)
+ *
-+ * Copyright (C) 2006, 2007 Atmel Corporation
++ * Based on the work of Copyright (C) 2004 Rick Bronson
++ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
++ * Ported to AVR32 and heavily modified by Espen Krangnes
++ * <ekrangnes at atmel.com>
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * Borrowed heavily from the original work by:
++ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
++ *
++ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
++ * bugs removed, interrupt routine markedly rewritten
+ *
+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
+ */
-+#include <linux/delay.h>
++
++
+#include <linux/err.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/lcd.h>
+#include <linux/module.h>
-+#include <linux/spi/spi.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/types.h>
++#include <linux/delay.h>
++#include <linux/i2c.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/platform_device.h>
++#include <linux/completion.h>
++#include <asm/io.h>
++#include <linux/time.h>
++#include "atmeltwi.h"
+
-+#include "ltv350qv.h"
++static unsigned int baudrate = CONFIG_I2C_ATMELTWI_BAUDRATE;
++module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
++MODULE_PARM_DESC(baudrate, "The TWI baudrate");
+
-+#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
+
-+struct ltv350qv {
-+ struct spi_device *spi;
-+ u8 *buffer;
-+ int power;
-+ struct lcd_device *ld;
++struct atmel_twi {
++ void __iomem *regs;
++ struct i2c_adapter adapter;
++ struct clk *pclk;
++ spinlock_t lock;
++ struct completion comp;
++ u32 intmask;
++ u8 *buf;
++ u8 len;
++ u8 acks_left;
++ u8 nack;
++ unsigned int irq;
++
+};
++#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
+
+/*
-+ * The power-on and power-off sequences are taken from the
-+ * LTV350QV-F04 data sheet from Samsung. The register definitions are
-+ * taken from the S6F2002 command list also from Samsung. Both
-+ * documents are distributed with the AVR32 Linux BSP CD from Atmel.
-+ *
-+ * There's still some voodoo going on here, but it's a lot better than
-+ * in the first incarnation of the driver where all we had was the raw
-+ * numbers from the initialization sequence.
++ * Initialize the TWI hardware registers.
+ */
-+static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val)
-+{
-+ struct spi_message msg;
-+ struct spi_transfer index_xfer = {
-+ .len = 3,
-+ .cs_change = 1,
-+ };
-+ struct spi_transfer value_xfer = {
-+ .len = 3,
-+ .cs_change = 1,
-+ };
-+
-+ spi_message_init(&msg);
-+
-+ /* register index */
-+ lcd->buffer[0] = LTV_OPC_INDEX;
-+ lcd->buffer[1] = 0x00;
-+ lcd->buffer[2] = reg & 0x7f;
-+ index_xfer.tx_buf = lcd->buffer;
-+ spi_message_add_tail(&index_xfer, &msg);
-+
-+ /* register value */
-+ lcd->buffer[4] = LTV_OPC_DATA;
-+ lcd->buffer[5] = val >> 8;
-+ lcd->buffer[6] = val;
-+ value_xfer.tx_buf = lcd->buffer + 4;
-+ spi_message_add_tail(&value_xfer, &msg);
-+
-+ return spi_sync(lcd->spi, &msg);
-+}
-+
-+/* The comments are taken straight from the data sheet */
-+static int ltv350qv_power_on(struct ltv350qv *lcd)
++static int __devinit twi_hwinit(struct atmel_twi *twi)
+{
-+ int ret;
-+
-+ /* Power On Reset Display off State */
-+ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000))
-+ goto err;
-+ msleep(15);
-+
-+ /* Power Setting Function 1 */
-+ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE))
-+ goto err;
-+ if (ltv350qv_write_reg(lcd, LTV_PWRCTL2, LTV_VCOML_ENABLE))
-+ goto err_power1;
-+
-+ /* Power Setting Function 2 */
-+ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+ LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
-+ | LTV_SUPPLY_CURRENT(5)))
-+ goto err_power2;
-+
-+ msleep(55);
++ unsigned long cdiv, ckdiv=0;
+
-+ /* Instruction Setting */
-+ ret = ltv350qv_write_reg(lcd, LTV_IFCTL,
-+ LTV_NMD | LTV_REV | LTV_NL(0x1d));
-+ ret |= ltv350qv_write_reg(lcd, LTV_DATACTL,
-+ LTV_DS_SAME | LTV_CHS_480
-+ | LTV_DF_RGB | LTV_RGB_BGR);
-+ ret |= ltv350qv_write_reg(lcd, LTV_ENTRY_MODE,
-+ LTV_VSPL_ACTIVE_LOW
-+ | LTV_HSPL_ACTIVE_LOW
-+ | LTV_DPL_SAMPLE_RISING
-+ | LTV_EPL_ACTIVE_LOW
-+ | LTV_SS_RIGHT_TO_LEFT);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL1, LTV_CLW(3));
-+ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+ LTV_NW_INV_1LINE | LTV_FWI(3));
-+ ret |= ltv350qv_write_reg(lcd, LTV_VBP, 0x000a);
-+ ret |= ltv350qv_write_reg(lcd, LTV_HBP, 0x0021);
-+ ret |= ltv350qv_write_reg(lcd, LTV_SOTCTL, LTV_SDT(3) | LTV_EQ(0));
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(0), 0x0103);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(1), 0x0301);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(2), 0x1f0f);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(3), 0x1f0f);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(4), 0x0707);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(5), 0x0307);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(6), 0x0707);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(7), 0x0000);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(8), 0x0004);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(9), 0x0000);
-+ if (ret)
-+ goto err_settings;
++ twi_writel(twi, IDR, ~0UL);
++ twi_writel(twi, CR, TWI_BIT(SWRST)); /*Reset peripheral*/
++ twi_readl(twi, SR);
+
-+ /* Wait more than 2 frames */
-+ msleep(20);
++ cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
+
-+ /* Display On Sequence */
-+ ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+ LTV_VCOM_DISABLE | LTV_VCOMOUT_ENABLE
-+ | LTV_POWER_ON | LTV_DRIVE_CURRENT(5)
-+ | LTV_SUPPLY_CURRENT(5));
-+ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+ LTV_NW_INV_1LINE | LTV_DSC | LTV_FWI(3));
-+ if (ret)
-+ goto err_disp_on;
++ while (cdiv > 255) {
++ ckdiv++;
++ cdiv = cdiv >> 1;
++ }
+
-+ /* Display should now be ON. Phew. */
++ if (ckdiv > 7)
++ return -EINVAL;
++ else
++ twi_writel(twi, CWGR, (TWI_BF(CKDIV, ckdiv)
++ | TWI_BF(CHDIV, cdiv)
++ | TWI_BF(CLDIV, cdiv)));
+ return 0;
-+
-+err_disp_on:
-+ /*
-+ * Try to recover. Error handling probably isn't very useful
-+ * at this point, just make a best effort to switch the panel
-+ * off.
-+ */
-+ ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+ LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
-+ | LTV_SUPPLY_CURRENT(5));
-+ ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+ LTV_NW_INV_1LINE | LTV_FWI(3));
-+err_settings:
-+err_power2:
-+err_power1:
-+ ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
-+ msleep(1);
-+err:
-+ ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
-+ return -EIO;
+}
+
-+static int ltv350qv_power_off(struct ltv350qv *lcd)
++/*
++ * Waits for the i2c status register to set the specified bitmask
++ * Returns 0 if timed out (~100ms).
++ */
++static short twi_complete(struct atmel_twi *twi, u32 mask)
+{
-+ int ret;
-+
-+ /* Display Off Sequence */
-+ ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+ LTV_VCOM_DISABLE
-+ | LTV_DRIVE_CURRENT(5)
-+ | LTV_SUPPLY_CURRENT(5));
-+ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+ LTV_NW_INV_1LINE | LTV_FWI(3));
++ int timeout = msecs_to_jiffies(100);
+
-+ /* Power down setting 1 */
-+ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
++ twi->intmask = mask;
++ init_completion(&twi->comp);
+
-+ /* Wait at least 1 ms */
-+ msleep(1);
++ twi_writel(twi, IER, mask);
+
-+ /* Power down setting 2 */
-+ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
++ if (!wait_for_completion_timeout(&twi->comp, timeout)) {
++ /* RESET TWI interface */
++ twi_writel(twi, CR, TWI_BIT(SWRST));
+
-+ /*
-+ * No point in trying to recover here. If we can't switch the
-+ * panel off, what are we supposed to do other than inform the
-+ * user about the failure?
-+ */
-+ if (ret)
-+ return -EIO;
++ /* Reinitialize TWI */
++ twi_hwinit(twi);
+
-+ /* Display power should now be OFF */
++ return -ETIMEDOUT;
++ }
+ return 0;
+}
+
-+static int ltv350qv_power(struct ltv350qv *lcd, int power)
-+{
-+ int ret = 0;
-+
-+ if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
-+ ret = ltv350qv_power_on(lcd);
-+ else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
-+ ret = ltv350qv_power_off(lcd);
-+
-+ if (!ret)
-+ lcd->power = power;
-+
-+ return ret;
-+}
-+
-+static int ltv350qv_set_power(struct lcd_device *ld, int power)
++/*
++ * Generic i2c master transfer entrypoint.
++ */
++static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
-+ struct ltv350qv *lcd;
-+
-+ lcd = class_get_devdata(&ld->class_dev);
-+ return ltv350qv_power(lcd, power);
-+}
++ struct atmel_twi *twi = to_atmel_twi(adap);
++ struct i2c_msg *pmsg;
++ int i;
+
-+static int ltv350qv_get_power(struct lcd_device *ld)
-+{
-+ struct ltv350qv *lcd;
++ /* get first message */
++ pmsg = msgs;
+
-+ lcd = class_get_devdata(&ld->class_dev);
-+ return lcd->power;
-+}
++ dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
+
-+static struct lcd_ops ltv_ops = {
-+ .get_power = ltv350qv_get_power,
-+ .set_power = ltv350qv_set_power,
-+};
++ twi->nack = 0;
++ for (i = 0; i < num; i++, pmsg++) {
++ twi->len = pmsg->len;
++ twi->buf = pmsg->buf;
++ twi->acks_left = pmsg->len;
++ twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
++ (pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
++ twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
+
-+static int __devinit ltv350qv_probe(struct spi_device *spi)
-+{
-+ struct ltv350qv *lcd;
-+ struct lcd_device *ld;
-+ int ret;
++ dev_dbg(&adap->dev,"#%d: internal addr %d %s byte%s %s 0x%02x\n",
++ i,pmsg->len, pmsg->flags & I2C_M_RD ? "reading" : "writing",
++ pmsg->len > 1 ? "s" : "",
++ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
+
-+ lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL);
-+ if (!lcd)
-+ return -ENOMEM;
++ /* enable */
++ twi_writel(twi, CR, TWI_BIT(MSEN));
+
-+ lcd->spi = spi;
-+ lcd->power = FB_BLANK_POWERDOWN;
-+ lcd->buffer = kzalloc(8, GFP_KERNEL);
++ if (pmsg->flags & I2C_M_RD) {
++ if (twi->len == 1)
++ twi_writel(twi, CR,
++ TWI_BIT(START) | TWI_BIT(STOP));
++ else
++ twi_writel(twi, CR, TWI_BIT(START));
+
-+ ld = lcd_device_register("ltv350qv", lcd, &ltv_ops);
-+ if (IS_ERR(ld)) {
-+ ret = PTR_ERR(ld);
-+ goto out_free_lcd;
-+ }
-+ lcd->ld = ld;
++ if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
++ dev_dbg(&adap->dev, "RXRDY timeout. Stopped with %d bytes left\n",
++ twi->acks_left);
++ return -ETIMEDOUT;
++ }
++ } else {
++ twi_writel(twi, THR, twi->buf[0]);
++ if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
++ dev_dbg(&adap->dev, "TXRDY timeout. Stopped with %d bytes left\n",
++ twi->acks_left);
++ return -ETIMEDOUT;
++ }
+
-+ ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK);
-+ if (ret)
-+ goto out_unregister;
++ if (twi->nack)
++ return -ENODEV;
++ }
+
-+ dev_set_drvdata(&spi->dev, lcd);
++ /* Disable TWI interface */
++ twi_writel(twi, CR, TWI_BIT(MSDIS));
+
-+ return 0;
++ } /* end cur msg */
+
-+out_unregister:
-+ lcd_device_unregister(ld);
-+out_free_lcd:
-+ kfree(lcd);
-+ return ret;
++ return i;
+}
+
-+static int __devexit ltv350qv_remove(struct spi_device *spi)
-+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
+
-+ ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+ lcd_device_unregister(lcd->ld);
-+ kfree(lcd);
++static irqreturn_t twi_interrupt(int irq, void *dev_id)
++{
++ struct atmel_twi *twi = dev_id;
++ int status = twi_readl(twi, SR);
+
-+ return 0;
-+}
++ /* Save state for later debug prints */
++ int old_mask = twi->intmask;
++ int old_status = status;
+
-+#ifdef CONFIG_PM
-+static int ltv350qv_suspend(struct spi_device *spi,
-+ pm_message_t state, u32 level)
-+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++ if (twi->intmask & status) {
++ if (status & TWI_BIT(NACK))
++ goto nack;
+
-+ if (level == SUSPEND_POWER_DOWN)
-+ return ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++ status &= twi->intmask;
+
-+ return 0;
-+}
++ if (status & TWI_BIT(TXCOMP))
++ goto complete;
+
-+static int ltv350qv_resume(struct spi_device *spi, u32 level)
-+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++ else if (status & TWI_BIT(RXRDY)) {
++ if ( twi->acks_left > 0 ) {
++ twi->buf[twi->len - twi->acks_left] =
++ twi_readl(twi, RHR);
++ twi->acks_left--;
++ }
++ if ( twi->acks_left == 1 )
++ twi_writel(twi, CR, TWI_BIT(STOP));
+
-+ if (level == RESUME_POWER_ON)
-+ return ltv350qv_power(lcd, FB_BLANK_UNBLANK);
++ if (twi->acks_left == 0 ) {
++ twi->intmask = TWI_BIT(TXCOMP);
++ twi_writel(twi, IER, TWI_BIT(TXCOMP));
++ }
++ } else if (status & TWI_BIT(TXRDY)) {
++ twi->acks_left--;
++ if ( twi->acks_left == 0 ) {
++ twi->intmask = TWI_BIT(TXCOMP);
++ twi_writel(twi, IER, TWI_BIT(TXCOMP));
++ } else if (twi->acks_left > 0)
++ twi_writel(twi, THR, twi->buf[twi->len - twi->acks_left]);
++ }
++ }
+
-+ return 0;
-+}
-+#else
-+#define ltv350qv_suspend NULL
-+#define ltv350qv_resume NULL
-+#endif
++ dev_dbg(&twi->adapter.dev,
++ "TWI ISR, SR 0x%08X, intmask 0x%08X, acks_left %i.\n",
++ old_status, old_mask, twi->acks_left);
+
-+/* Power down all displays on reboot, poweroff or halt */
-+static void ltv350qv_shutdown(struct spi_device *spi)
-+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++ return IRQ_HANDLED;
+
-+ ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+}
++nack:
++ dev_dbg(&twi->adapter.dev, "NACK received!\n");
++ twi->nack = 1;
+
-+static struct spi_driver ltv350qv_driver = {
-+ .driver = {
-+ .name = "ltv350qv",
-+ .bus = &spi_bus_type,
-+ .owner = THIS_MODULE,
-+ },
++complete:
++ twi_writel(twi, IDR, ~0UL);
++ complete(&twi->comp);
+
-+ .probe = ltv350qv_probe,
-+ .remove = __devexit_p(ltv350qv_remove),
-+ .shutdown = ltv350qv_shutdown,
-+ .suspend = ltv350qv_suspend,
-+ .resume = ltv350qv_resume,
-+};
++ dev_dbg(&twi->adapter.dev,
++ "TWI ISR, SR 0x%08X, intmask 0x%08X, \
++ acks_left %i - completed.\n",
++ old_status, old_mask, twi->acks_left);
+
-+static int __init ltv350qv_init(void)
-+{
-+ return spi_register_driver(&ltv350qv_driver);
++ return IRQ_HANDLED;
+}
+
-+static void __exit ltv350qv_exit(void)
-+{
-+ spi_unregister_driver(&ltv350qv_driver);
-+}
-+module_init(ltv350qv_init);
-+module_exit(ltv350qv_exit);
+
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/video/backlight/ltv350qv.h b/drivers/video/backlight/ltv350qv.h
-new file mode 100644
-index 0000000..189112e
---- /dev/null
-+++ b/drivers/video/backlight/ltv350qv.h
-@@ -0,0 +1,95 @@
+/*
-+ * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel
-+ *
-+ * Copyright (C) 2006, 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
++ * Return list of supported functionality.
+ */
-+#ifndef __LTV350QV_H
-+#define __LTV350QV_H
-+
-+#define LTV_OPC_INDEX 0x74
-+#define LTV_OPC_DATA 0x76
-+
-+#define LTV_ID 0x00 /* ID Read */
-+#define LTV_IFCTL 0x01 /* Display Interface Control */
-+#define LTV_DATACTL 0x02 /* Display Data Control */
-+#define LTV_ENTRY_MODE 0x03 /* Entry Mode */
-+#define LTV_GATECTL1 0x04 /* Gate Control 1 */
-+#define LTV_GATECTL2 0x05 /* Gate Control 2 */
-+#define LTV_VBP 0x06 /* Vertical Back Porch */
-+#define LTV_HBP 0x07 /* Horizontal Back Porch */
-+#define LTV_SOTCTL 0x08 /* Source Output Timing Control */
-+#define LTV_PWRCTL1 0x09 /* Power Control 1 */
-+#define LTV_PWRCTL2 0x0a /* Power Control 2 */
-+#define LTV_GAMMA(x) (0x10 + (x)) /* Gamma control */
-+
-+/* Bit definitions for LTV_IFCTL */
-+#define LTV_IM (1 << 15)
-+#define LTV_NMD (1 << 14)
-+#define LTV_SSMD (1 << 13)
-+#define LTV_REV (1 << 7)
-+#define LTV_NL(x) (((x) & 0x001f) << 0)
-+
-+/* Bit definitions for LTV_DATACTL */
-+#define LTV_DS_SAME (0 << 12)
-+#define LTV_DS_D_TO_S (1 << 12)
-+#define LTV_DS_S_TO_D (2 << 12)
-+#define LTV_CHS_384 (0 << 9)
-+#define LTV_CHS_480 (1 << 9)
-+#define LTV_CHS_492 (2 << 9)
-+#define LTV_DF_RGB (0 << 6)
-+#define LTV_DF_RGBX (1 << 6)
-+#define LTV_DF_XRGB (2 << 6)
-+#define LTV_RGB_RGB (0 << 2)
-+#define LTV_RGB_BGR (1 << 2)
-+#define LTV_RGB_GRB (2 << 2)
-+#define LTV_RGB_RBG (3 << 2)
-+
-+/* Bit definitions for LTV_ENTRY_MODE */
-+#define LTV_VSPL_ACTIVE_LOW (0 << 15)
-+#define LTV_VSPL_ACTIVE_HIGH (1 << 15)
-+#define LTV_HSPL_ACTIVE_LOW (0 << 14)
-+#define LTV_HSPL_ACTIVE_HIGH (1 << 14)
-+#define LTV_DPL_SAMPLE_RISING (0 << 13)
-+#define LTV_DPL_SAMPLE_FALLING (1 << 13)
-+#define LTV_EPL_ACTIVE_LOW (0 << 12)
-+#define LTV_EPL_ACTIVE_HIGH (1 << 12)
-+#define LTV_SS_LEFT_TO_RIGHT (0 << 8)
-+#define LTV_SS_RIGHT_TO_LEFT (1 << 8)
-+#define LTV_STB (1 << 1)
-+
-+/* Bit definitions for LTV_GATECTL1 */
-+#define LTV_CLW(x) (((x) & 0x0007) << 12)
-+#define LTV_GAON (1 << 5)
-+#define LTV_SDR (1 << 3)
-+
-+/* Bit definitions for LTV_GATECTL2 */
-+#define LTV_NW_INV_FRAME (0 << 14)
-+#define LTV_NW_INV_1LINE (1 << 14)
-+#define LTV_NW_INV_2LINE (2 << 14)
-+#define LTV_DSC (1 << 12)
-+#define LTV_GIF (1 << 8)
-+#define LTV_FHN (1 << 7)
-+#define LTV_FTI(x) (((x) & 0x0003) << 4)
-+#define LTV_FWI(x) (((x) & 0x0003) << 0)
-+
-+/* Bit definitions for LTV_SOTCTL */
-+#define LTV_SDT(x) (((x) & 0x0007) << 10)
-+#define LTV_EQ(x) (((x) & 0x0007) << 2)
-+
-+/* Bit definitions for LTV_PWRCTL1 */
-+#define LTV_VCOM_DISABLE (1 << 14)
-+#define LTV_VCOMOUT_ENABLE (1 << 11)
-+#define LTV_POWER_ON (1 << 9)
-+#define LTV_DRIVE_CURRENT(x) (((x) & 0x0007) << 4) /* 0=off, 5=max */
-+#define LTV_SUPPLY_CURRENT(x) (((x) & 0x0007) << 0) /* 0=off, 5=max */
-+
-+/* Bit definitions for LTV_PWRCTL2 */
-+#define LTV_VCOML_ENABLE (1 << 13)
-+#define LTV_VCOML_VOLTAGE(x) (((x) & 0x001f) << 8) /* 0=1V, 31=-1V */
-+#define LTV_VCOMH_VOLTAGE(x) (((x) & 0x001f) << 0) /* 0=3V, 31=4.5V */
-+
-+#endif /* __LTV350QV_H */
-diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
-index 0ce6ee9..d96b10f 100644
---- a/include/asm-arm/arch-at91/board.h
-+++ b/include/asm-arm/arch-at91/board.h
-@@ -64,6 +64,7 @@ extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-
- /* Ethernet (EMAC & MACB) */
- struct at91_eth_data {
-+ u32 phy_mask;
- u8 phy_irq_pin; /* PHY IRQ */
- u8 is_rmii; /* using RMII interface? */
- };
-diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
-index 9fd2e32..9b36eb8 100644
---- a/include/asm-avr32/arch-at32ap/board.h
-+++ b/include/asm-avr32/arch-at32ap/board.h
-@@ -6,6 +6,8 @@
-
- #include <linux/types.h>
-
-+#define GPIO_PIN_NONE (-1)
-+
- /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
- void at32_add_system_devices(void);
-
-@@ -21,6 +23,7 @@ void at32_map_usart(unsigned int hw_id, unsigned int line);
- struct platform_device *at32_add_device_usart(unsigned int id);
-
- struct eth_platform_data {
-+ u32 phy_mask;
- u8 is_rmii;
- };
- struct platform_device *
-@@ -30,9 +33,41 @@ struct spi_board_info;
- struct platform_device *
- at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
-
-+struct platform_device *at32_add_device_twi(unsigned int id);
-+
-+struct mci_platform_data {
-+ int detect_pin;
-+ int wp_pin;
-+};
-+struct platform_device *
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
++static u32 twi_func(struct i2c_adapter *adapter)
++{
++ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
++}
+
-+struct usba_platform_data {
-+ int vbus_pin;
++/* For now, we only handle combined mode (smbus) */
++static struct i2c_algorithm twi_algorithm = {
++ .master_xfer = twi_xfer,
++ .functionality = twi_func,
+};
-+struct platform_device *
-+at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
+
- struct atmel_lcdfb_info;
- struct platform_device *
- at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
- unsigned long fbmem_start, unsigned long fbmem_len);
-
-+struct platform_device *at32_add_device_ac97c(unsigned int id);
-+struct platform_device *at32_add_device_abdac(unsigned int id);
-+
-+/* depending on what's hooked up, not all SSC pins will be used */
-+#define ATMEL_SSC_TK 0x01
-+#define ATMEL_SSC_TF 0x02
-+#define ATMEL_SSC_TD 0x04
-+#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
-+
-+#define ATMEL_SSC_RK 0x10
-+#define ATMEL_SSC_RF 0x20
-+#define ATMEL_SSC_RD 0x40
-+#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
-+
-+struct platform_device *
-+at32_add_device_ssc(unsigned int id, unsigned int flags);
-+
- #endif /* __ASM_ARCH_BOARD_H */
-diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h
-index 9930871..0f95567 100644
---- a/include/asm-avr32/arch-at32ap/portmux.h
-+++ b/include/asm-avr32/arch-at32ap/portmux.h
-@@ -25,4 +25,16 @@ void at32_select_periph(unsigned int pin, unsigned int periph,
- void at32_select_gpio(unsigned int pin, unsigned long flags);
- void at32_reserve_pin(unsigned int pin);
-
-+#ifdef CONFIG_GPIO_DEV
-+
-+/* Gang allocators and accessors; used by the GPIO /dev driver */
-+int at32_gpio_port_is_valid(unsigned int port);
-+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
-+void at32_deselect_pins(unsigned int port, u32 pins);
-+
-+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
-+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
-+
-+#endif /* CONFIG_GPIO_DEV */
-+
- #endif /* __ASM_ARCH_PORTMUX_H__ */
-diff --git a/include/asm-avr32/arch-at32ap/sm.h b/include/asm-avr32/arch-at32ap/sm.h
-deleted file mode 100644
-index 265a9ea..0000000
---- a/include/asm-avr32/arch-at32ap/sm.h
-+++ /dev/null
-@@ -1,27 +0,0 @@
--/*
-- * AT32 System Manager interface.
-- *
-- * Copyright (C) 2006 Atmel Corporation
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--#ifndef __ASM_AVR32_AT32_SM_H__
--#define __ASM_AVR32_AT32_SM_H__
--
--struct irq_chip;
--struct platform_device;
--
--struct at32_sm {
-- spinlock_t lock;
-- void __iomem *regs;
-- struct irq_chip *eim_chip;
-- unsigned int eim_first_irq;
-- struct platform_device *pdev;
--};
--
--extern struct platform_device at32_sm_device;
--extern struct at32_sm system_manager;
--
--#endif /* __ASM_AVR32_AT32_SM_H__ */
-diff --git a/include/asm-avr32/atomic.h b/include/asm-avr32/atomic.h
-index b9c2548..7ef3862 100644
---- a/include/asm-avr32/atomic.h
-+++ b/include/asm-avr32/atomic.h
-@@ -101,7 +101,7 @@ static inline int atomic_sub_unless(atomic_t *v, int a, int u)
- " mov %1, 1\n"
- "1:"
- : "=&r"(tmp), "=&r"(result), "=o"(v->counter)
-- : "m"(v->counter), "rKs21"(a), "rKs21"(u)
-+ : "m"(v->counter), "rKs21"(a), "rKs21"(u), "1"(result)
- : "cc", "memory");
-
- return result;
-@@ -137,7 +137,7 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
- " mov %1, 1\n"
- "1:"
- : "=&r"(tmp), "=&r"(result), "=o"(v->counter)
-- : "m"(v->counter), "r"(a), "ir"(u)
-+ : "m"(v->counter), "r"(a), "ir"(u), "1"(result)
- : "cc", "memory");
- }
-
-diff --git a/include/asm-avr32/dma-controller.h b/include/asm-avr32/dma-controller.h
-new file mode 100644
-index 0000000..56a4965
---- /dev/null
-+++ b/include/asm-avr32/dma-controller.h
-@@ -0,0 +1,166 @@
+/*
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
++ * Main initialization routine.
+ */
-+#ifndef __ASM_AVR32_DMA_CONTROLLER_H
-+#define __ASM_AVR32_DMA_CONTROLLER_H
-+
-+#include <linux/device.h>
-+
-+#define DMA_DIR_MEM_TO_MEM 0x0000
-+#define DMA_DIR_MEM_TO_PERIPH 0x0001
-+#define DMA_DIR_PERIPH_TO_MEM 0x0002
-+#define DMA_DIR_PERIPH_TO_PERIPH 0x0003
-+
-+#define DMA_WIDTH_8BIT 0
-+#define DMA_WIDTH_16BIT 1
-+#define DMA_WIDTH_32BIT 2
-+
-+struct dma_request {
-+ struct dma_controller *dmac;
-+ struct list_head list;
-+
-+ unsigned short channel;
-+
-+ void (*xfer_complete)(struct dma_request *req);
-+ void (*block_complete)(struct dma_request *req);
-+ void (*error)(struct dma_request *req);
-+};
++static int __devinit twi_probe(struct platform_device *pdev)
++{
++ struct atmel_twi *twi;
++ struct resource *regs;
++ struct clk *pclk;
++ struct i2c_adapter *adapter;
++ int rc, irq;
+
-+struct dma_request_sg {
-+ struct dma_request req;
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
+
-+ int nr_sg;
-+ struct scatterlist *sg;
-+ unsigned long block_size;
-+ unsigned int nr_blocks;
++ pclk = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(pclk))
++ return PTR_ERR(pclk);
++ clk_enable(pclk);
+
-+ dma_addr_t data_reg;
-+ unsigned short periph_id;
++ rc = -ENOMEM;
++ twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
++ if (!twi) {
++ dev_err(&pdev->dev, "can't allocate interface!\n");
++ goto err_alloc_twi;
++ }
+
-+ unsigned char direction;
-+ unsigned char width;
-+};
-+#define to_dma_request_sg(_req) \
-+ container_of(_req, struct dma_request_sg, req)
++ twi->pclk = pclk;
++ twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!twi->regs)
++ goto err_ioremap;
+
-+struct dma_request_cyclic {
-+ struct dma_request req;
++ irq = platform_get_irq(pdev,0);
++ rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
++ if (rc) {
++ dev_err(&pdev->dev, "can't bind irq!\n");
++ goto err_irq;
++ }
++ twi->irq = irq;
+
-+ int periods;
-+ unsigned long buffer_size;
++ rc = twi_hwinit(twi);
++ if (rc) {
++ dev_err(&pdev->dev, "Unable to set baudrate\n");
++ goto err_hw_init;
++ }
+
-+ dma_addr_t buffer_start;
-+ dma_addr_t data_reg;
++ adapter = &twi->adapter;
++ sprintf(adapter->name, "TWI");
++ adapter->algo = &twi_algorithm;
++ adapter->class = I2C_CLASS_HWMON;
++ adapter->dev.parent = &pdev->dev;
+
-+ unsigned short periph_id;
-+ unsigned char direction;
-+ unsigned char width;
++ platform_set_drvdata(pdev, twi);
+
-+ void *dev_id;
-+};
-+#define to_dma_request_cyclic(_req) \
-+ container_of(_req, struct dma_request_cyclic, req)
++ rc = i2c_add_adapter(adapter);
++ if (rc) {
++ dev_err(&pdev->dev, "Adapter %s registration failed\n",
++ adapter->name);
++ goto err_register;
++ }
+
-+struct dma_request_memcpy {
-+ struct dma_request req;
++ dev_info(&pdev->dev, "Atmel TWI i2c bus device (baudrate %dk) at 0x%08lx.\n",
++ baudrate/1000, (unsigned long)regs->start);
+
-+ dma_addr_t src_addr;
-+ unsigned int src_width;
-+ unsigned int src_stride;
++ return 0;
+
-+ dma_addr_t dst_addr;
-+ unsigned int dst_width;
-+ unsigned int dst_stride;
+
-+ size_t length;
++err_register:
++ platform_set_drvdata(pdev, NULL);
+
-+ unsigned short src_reverse:1;
-+ unsigned short dst_reverse:1;
-+};
-+#define to_dma_request_memcpy(_req) \
-+ container_of(_req, struct dma_request_memcpy, req)
++err_hw_init:
++ free_irq(irq, twi);
+
-+struct dma_controller {
-+ struct list_head list;
-+ int id;
-+ struct device *dev;
++err_irq:
++ iounmap(twi->regs);
+
-+ int (*alloc_channel)(struct dma_controller *dmac);
-+ void (*release_channel)(struct dma_controller *dmac,
-+ int channel);
-+ int (*prepare_request_sg)(struct dma_controller *dmac,
-+ struct dma_request_sg *req);
-+ int (*prepare_request_cyclic)(struct dma_controller *dmac,
-+ struct dma_request_cyclic *req);
-+ int (*prepare_request_memcpy)(struct dma_controller *dmac,
-+ struct dma_request_memcpy *req);
-+ int (*start_request)(struct dma_controller *dmac,
-+ unsigned int channel);
-+ int (*stop_request)(struct dma_controller *dmac,
-+ unsigned int channel);
-+ dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
-+ unsigned int channel);
-+};
++err_ioremap:
++ kfree(twi);
+
-+static inline int
-+dma_alloc_channel(struct dma_controller *dmac)
-+{
-+ return dmac->alloc_channel(dmac);
-+}
++err_alloc_twi:
++ clk_disable(pclk);
++ clk_put(pclk);
+
-+static inline void
-+dma_release_channel(struct dma_controller *dmac, int chan)
-+{
-+ dmac->release_channel(dmac, chan);
++ return rc;
+}
+
-+static inline int
-+dma_prepare_request_sg(struct dma_controller *dmac,
-+ struct dma_request_sg *req)
++static int __devexit twi_remove(struct platform_device *pdev)
+{
-+ return dmac->prepare_request_sg(dmac, req);
-+}
++ struct atmel_twi *twi = platform_get_drvdata(pdev);
++ int res;
+
-+static inline int
-+dma_prepare_request_cyclic(struct dma_controller *dmac,
-+ struct dma_request_cyclic *req)
-+{
-+ return dmac->prepare_request_cyclic(dmac, req);
-+}
++ platform_set_drvdata(pdev, NULL);
++ res = i2c_del_adapter(&twi->adapter);
++ twi_writel(twi, CR, TWI_BIT(MSDIS));
++ iounmap(twi->regs);
++ clk_disable(twi->pclk);
++ clk_put(twi->pclk);
++ free_irq(twi->irq, twi);
++ kfree(twi);
+
-+static inline int
-+dma_prepare_request_memcpy(struct dma_controller *dmac,
-+ struct dma_request_memcpy *req)
-+{
-+ return dmac->prepare_request_memcpy(dmac, req);
++ return res;
+}
+
-+static inline int
-+dma_start_request(struct dma_controller *dmac,
-+ unsigned int channel)
-+{
-+ return dmac->start_request(dmac, channel);
-+}
++static struct platform_driver twi_driver = {
++ .probe = twi_probe,
++ .remove = __devexit_p(twi_remove),
++ .driver = {
++ .name = "atmel_twi",
++ .owner = THIS_MODULE,
++ },
++};
+
-+static inline int
-+dma_stop_request(struct dma_controller *dmac,
-+ unsigned int channel)
++static int __init atmel_twi_init(void)
+{
-+ return dmac->stop_request(dmac, channel);
++ return platform_driver_register(&twi_driver);
+}
+
-+static inline dma_addr_t
-+dma_get_current_pos(struct dma_controller *dmac,
-+ unsigned int channel)
++static void __exit atmel_twi_exit(void)
+{
-+ return dmac->get_current_pos(dmac, channel);
++ platform_driver_unregister(&twi_driver);
+}
+
-+extern int register_dma_controller(struct dma_controller *dmac);
-+extern struct dma_controller *find_dma_controller(int id);
-+
-+#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
-diff --git a/include/asm-avr32/unaligned.h b/include/asm-avr32/unaligned.h
-index 3042723..36f5fd4 100644
---- a/include/asm-avr32/unaligned.h
-+++ b/include/asm-avr32/unaligned.h
-@@ -7,19 +7,10 @@
- * words, but halfwords must be halfword-aligned, and doublewords must
- * be word-aligned.
- *
-- * TODO: Make all this CPU-specific and optimize.
-+ * However, swapped word loads must be word-aligned so we can't
-+ * optimize word loads in general.
- */
-
--#include <linux/string.h>
--
--/* Use memmove here, so gcc does not insert a __builtin_memcpy. */
--
--#define get_unaligned(ptr) \
-- ({ __typeof__(*(ptr)) __tmp; memmove(&__tmp, (ptr), sizeof(*(ptr))); __tmp; })
--
--#define put_unaligned(val, ptr) \
-- ({ __typeof__(*(ptr)) __tmp = (val); \
-- memmove((ptr), &__tmp, sizeof(*(ptr))); \
-- (void)0; })
-+#include <asm-generic/unaligned.h>
-
- #endif /* __ASM_AVR32_UNALIGNED_H */
-diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
-new file mode 100644
-index 0000000..0602339
---- /dev/null
-+++ b/include/linux/atmel-ssc.h
-@@ -0,0 +1,312 @@
-+#ifndef __INCLUDE_ATMEL_SSC_H
-+#define __INCLUDE_ATMEL_SSC_H
-+
-+#include <linux/platform_device.h>
-+#include <linux/list.h>
-+
-+struct ssc_device {
-+ struct list_head list;
-+ void __iomem *regs;
-+ struct platform_device *pdev;
-+ struct clk *clk;
-+ int user;
-+ int irq;
-+};
-+
-+struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
-+void ssc_free(struct ssc_device *ssc);
-+
-+/* SSC register offsets */
-+
-+/* SSC Control Register */
-+#define SSC_CR 0x00000000
-+#define SSC_CR_RXDIS_SIZE 1
-+#define SSC_CR_RXDIS_OFFSET 1
-+#define SSC_CR_RXEN_SIZE 1
-+#define SSC_CR_RXEN_OFFSET 0
-+#define SSC_CR_SWRST_SIZE 1
-+#define SSC_CR_SWRST_OFFSET 15
-+#define SSC_CR_TXDIS_SIZE 1
-+#define SSC_CR_TXDIS_OFFSET 9
-+#define SSC_CR_TXEN_SIZE 1
-+#define SSC_CR_TXEN_OFFSET 8
-+
-+/* SSC Clock Mode Register */
-+#define SSC_CMR 0x00000004
-+#define SSC_CMR_DIV_SIZE 12
-+#define SSC_CMR_DIV_OFFSET 0
-+
-+/* SSC Receive Clock Mode Register */
-+#define SSC_RCMR 0x00000010
-+#define SSC_RCMR_CKG_SIZE 2
-+#define SSC_RCMR_CKG_OFFSET 6
-+#define SSC_RCMR_CKI_SIZE 1
-+#define SSC_RCMR_CKI_OFFSET 5
-+#define SSC_RCMR_CKO_SIZE 3
-+#define SSC_RCMR_CKO_OFFSET 2
-+#define SSC_RCMR_CKS_SIZE 2
-+#define SSC_RCMR_CKS_OFFSET 0
-+#define SSC_RCMR_PERIOD_SIZE 8
-+#define SSC_RCMR_PERIOD_OFFSET 24
-+#define SSC_RCMR_START_SIZE 4
-+#define SSC_RCMR_START_OFFSET 8
-+#define SSC_RCMR_STOP_SIZE 1
-+#define SSC_RCMR_STOP_OFFSET 12
-+#define SSC_RCMR_STTDLY_SIZE 8
-+#define SSC_RCMR_STTDLY_OFFSET 16
-+
-+/* SSC Receive Frame Mode Register */
-+#define SSC_RFMR 0x00000014
-+#define SSC_RFMR_DATLEN_SIZE 5
-+#define SSC_RFMR_DATLEN_OFFSET 0
-+#define SSC_RFMR_DATNB_SIZE 4
-+#define SSC_RFMR_DATNB_OFFSET 8
-+#define SSC_RFMR_FSEDGE_SIZE 1
-+#define SSC_RFMR_FSEDGE_OFFSET 24
-+#define SSC_RFMR_FSLEN_SIZE 4
-+#define SSC_RFMR_FSLEN_OFFSET 16
-+#define SSC_RFMR_FSOS_SIZE 4
-+#define SSC_RFMR_FSOS_OFFSET 20
-+#define SSC_RFMR_LOOP_SIZE 1
-+#define SSC_RFMR_LOOP_OFFSET 5
-+#define SSC_RFMR_MSBF_SIZE 1
-+#define SSC_RFMR_MSBF_OFFSET 7
-+
-+/* SSC Transmit Clock Mode Register */
-+#define SSC_TCMR 0x00000018
-+#define SSC_TCMR_CKG_SIZE 2
-+#define SSC_TCMR_CKG_OFFSET 6
-+#define SSC_TCMR_CKI_SIZE 1
-+#define SSC_TCMR_CKI_OFFSET 5
-+#define SSC_TCMR_CKO_SIZE 3
-+#define SSC_TCMR_CKO_OFFSET 2
-+#define SSC_TCMR_CKS_SIZE 2
-+#define SSC_TCMR_CKS_OFFSET 0
-+#define SSC_TCMR_PERIOD_SIZE 8
-+#define SSC_TCMR_PERIOD_OFFSET 24
-+#define SSC_TCMR_START_SIZE 4
-+#define SSC_TCMR_START_OFFSET 8
-+#define SSC_TCMR_STTDLY_SIZE 8
-+#define SSC_TCMR_STTDLY_OFFSET 16
-+
-+/* SSC Transmit Frame Mode Register */
-+#define SSC_TFMR 0x0000001c
-+#define SSC_TFMR_DATDEF_SIZE 1
-+#define SSC_TFMR_DATDEF_OFFSET 5
-+#define SSC_TFMR_DATLEN_SIZE 5
-+#define SSC_TFMR_DATLEN_OFFSET 0
-+#define SSC_TFMR_DATNB_SIZE 4
-+#define SSC_TFMR_DATNB_OFFSET 8
-+#define SSC_TFMR_FSDEN_SIZE 1
-+#define SSC_TFMR_FSDEN_OFFSET 23
-+#define SSC_TFMR_FSEDGE_SIZE 1
-+#define SSC_TFMR_FSEDGE_OFFSET 24
-+#define SSC_TFMR_FSLEN_SIZE 4
-+#define SSC_TFMR_FSLEN_OFFSET 16
-+#define SSC_TFMR_FSOS_SIZE 3
-+#define SSC_TFMR_FSOS_OFFSET 20
-+#define SSC_TFMR_MSBF_SIZE 1
-+#define SSC_TFMR_MSBF_OFFSET 7
-+
-+/* SSC Receive Hold Register */
-+#define SSC_RHR 0x00000020
-+#define SSC_RHR_RDAT_SIZE 32
-+#define SSC_RHR_RDAT_OFFSET 0
-+
-+/* SSC Transmit Hold Register */
-+#define SSC_THR 0x00000024
-+#define SSC_THR_TDAT_SIZE 32
-+#define SSC_THR_TDAT_OFFSET 0
-+
-+/* SSC Receive Sync. Holding Register */
-+#define SSC_RSHR 0x00000030
-+#define SSC_RSHR_RSDAT_SIZE 16
-+#define SSC_RSHR_RSDAT_OFFSET 0
-+
-+/* SSC Transmit Sync. Holding Register */
-+#define SSC_TSHR 0x00000034
-+#define SSC_TSHR_TSDAT_SIZE 16
-+#define SSC_TSHR_RSDAT_OFFSET 0
-+
-+/* SSC Receive Compare 0 Register */
-+#define SSC_RC0R 0x00000038
-+#define SSC_RC0R_CP0_SIZE 16
-+#define SSC_RC0R_CP0_OFFSET 0
-+
-+/* SSC Receive Compare 1 Register */
-+#define SSC_RC1R 0x0000003c
-+#define SSC_RC1R_CP1_SIZE 16
-+#define SSC_RC1R_CP1_OFFSET 0
-+
-+/* SSC Status Register */
-+#define SSC_SR 0x00000040
-+#define SSC_SR_CP0_SIZE 1
-+#define SSC_SR_CP0_OFFSET 8
-+#define SSC_SR_CP1_SIZE 1
-+#define SSC_SR_CP1_OFFSET 9
-+#define SSC_SR_ENDRX_SIZE 1
-+#define SSC_SR_ENDRX_OFFSET 6
-+#define SSC_SR_ENDTX_SIZE 1
-+#define SSC_SR_ENDTX_OFFSET 2
-+#define SSC_SR_OVRUN_SIZE 1
-+#define SSC_SR_OVRUN_OFFSET 5
-+#define SSC_SR_RXBUFF_SIZE 1
-+#define SSC_SR_RXBUFF_OFFSET 7
-+#define SSC_SR_RXEN_SIZE 1
-+#define SSC_SR_RXEN_OFFSET 17
-+#define SSC_SR_RXRDY_SIZE 1
-+#define SSC_SR_RXRDY_OFFSET 4
-+#define SSC_SR_RXSYN_SIZE 1
-+#define SSC_SR_RXSYN_OFFSET 11
-+#define SSC_SR_TXBUFE_SIZE 1
-+#define SSC_SR_TXBUFE_OFFSET 3
-+#define SSC_SR_TXEMPTY_SIZE 1
-+#define SSC_SR_TXEMPTY_OFFSET 1
-+#define SSC_SR_TXEN_SIZE 1
-+#define SSC_SR_TXEN_OFFSET 16
-+#define SSC_SR_TXRDY_SIZE 1
-+#define SSC_SR_TXRDY_OFFSET 0
-+#define SSC_SR_TXSYN_SIZE 1
-+#define SSC_SR_TXSYN_OFFSET 10
-+
-+/* SSC Interrupt Enable Register */
-+#define SSC_IER 0x00000044
-+#define SSC_IER_CP0_SIZE 1
-+#define SSC_IER_CP0_OFFSET 8
-+#define SSC_IER_CP1_SIZE 1
-+#define SSC_IER_CP1_OFFSET 9
-+#define SSC_IER_ENDRX_SIZE 1
-+#define SSC_IER_ENDRX_OFFSET 6
-+#define SSC_IER_ENDTX_SIZE 1
-+#define SSC_IER_ENDTX_OFFSET 2
-+#define SSC_IER_OVRUN_SIZE 1
-+#define SSC_IER_OVRUN_OFFSET 5
-+#define SSC_IER_RXBUFF_SIZE 1
-+#define SSC_IER_RXBUFF_OFFSET 7
-+#define SSC_IER_RXRDY_SIZE 1
-+#define SSC_IER_RXRDY_OFFSET 4
-+#define SSC_IER_RXSYN_SIZE 1
-+#define SSC_IER_RXSYN_OFFSET 11
-+#define SSC_IER_TXBUFE_SIZE 1
-+#define SSC_IER_TXBUFE_OFFSET 3
-+#define SSC_IER_TXEMPTY_SIZE 1
-+#define SSC_IER_TXEMPTY_OFFSET 1
-+#define SSC_IER_TXRDY_SIZE 1
-+#define SSC_IER_TXRDY_OFFSET 0
-+#define SSC_IER_TXSYN_SIZE 1
-+#define SSC_IER_TXSYN_OFFSET 10
++module_init(atmel_twi_init);
++module_exit(atmel_twi_exit);
+
-+/* SSC Interrupt Disable Register */
-+#define SSC_IDR 0x00000048
-+#define SSC_IDR_CP0_SIZE 1
-+#define SSC_IDR_CP0_OFFSET 8
-+#define SSC_IDR_CP1_SIZE 1
-+#define SSC_IDR_CP1_OFFSET 9
-+#define SSC_IDR_ENDRX_SIZE 1
-+#define SSC_IDR_ENDRX_OFFSET 6
-+#define SSC_IDR_ENDTX_SIZE 1
-+#define SSC_IDR_ENDTX_OFFSET 2
-+#define SSC_IDR_OVRUN_SIZE 1
-+#define SSC_IDR_OVRUN_OFFSET 5
-+#define SSC_IDR_RXBUFF_SIZE 1
-+#define SSC_IDR_RXBUFF_OFFSET 7
-+#define SSC_IDR_RXRDY_SIZE 1
-+#define SSC_IDR_RXRDY_OFFSET 4
-+#define SSC_IDR_RXSYN_SIZE 1
-+#define SSC_IDR_RXSYN_OFFSET 11
-+#define SSC_IDR_TXBUFE_SIZE 1
-+#define SSC_IDR_TXBUFE_OFFSET 3
-+#define SSC_IDR_TXEMPTY_SIZE 1
-+#define SSC_IDR_TXEMPTY_OFFSET 1
-+#define SSC_IDR_TXRDY_SIZE 1
-+#define SSC_IDR_TXRDY_OFFSET 0
-+#define SSC_IDR_TXSYN_SIZE 1
-+#define SSC_IDR_TXSYN_OFFSET 10
++MODULE_AUTHOR("Espen Krangnes");
++MODULE_DESCRIPTION("I2C driver for Atmel TWI");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.22.1/drivers/i2c/busses/atmeltwi.h
+===================================================================
+--- linux-2.6.22.1/drivers/i2c/busses/atmeltwi.h (revision 0)
++++ linux-2.6.22.1/drivers/i2c/busses/atmeltwi.h (revision 0)
+@@ -0,0 +1,117 @@
++/*
++ * Register definitions for the Atmel Two-Wire Interface
++ */
+
-+/* SSC Interrupt Mask Register */
-+#define SSC_IMR 0x0000004c
-+#define SSC_IMR_CP0_SIZE 1
-+#define SSC_IMR_CP0_OFFSET 8
-+#define SSC_IMR_CP1_SIZE 1
-+#define SSC_IMR_CP1_OFFSET 9
-+#define SSC_IMR_ENDRX_SIZE 1
-+#define SSC_IMR_ENDRX_OFFSET 6
-+#define SSC_IMR_ENDTX_SIZE 1
-+#define SSC_IMR_ENDTX_OFFSET 2
-+#define SSC_IMR_OVRUN_SIZE 1
-+#define SSC_IMR_OVRUN_OFFSET 5
-+#define SSC_IMR_RXBUFF_SIZE 1
-+#define SSC_IMR_RXBUFF_OFFSET 7
-+#define SSC_IMR_RXRDY_SIZE 1
-+#define SSC_IMR_RXRDY_OFFSET 4
-+#define SSC_IMR_RXSYN_SIZE 1
-+#define SSC_IMR_RXSYN_OFFSET 11
-+#define SSC_IMR_TXBUFE_SIZE 1
-+#define SSC_IMR_TXBUFE_OFFSET 3
-+#define SSC_IMR_TXEMPTY_SIZE 1
-+#define SSC_IMR_TXEMPTY_OFFSET 1
-+#define SSC_IMR_TXRDY_SIZE 1
-+#define SSC_IMR_TXRDY_OFFSET 0
-+#define SSC_IMR_TXSYN_SIZE 1
-+#define SSC_IMR_TXSYN_OFFSET 10
++#ifndef __ASM_AVR32_TWI_H__
++#define __ASM_AVR32_TWI_H__
+
-+/* SSC PDC Receive Pointer Register */
-+#define SSC_PDC_RPR 0x00000100
++/* TWI register offsets */
++#define TWI_CR 0x0000
++#define TWI_MMR 0x0004
++#define TWI_SMR 0x0008
++#define TWI_IADR 0x000c
++#define TWI_CWGR 0x0010
++#define TWI_SR 0x0020
++#define TWI_IER 0x0024
++#define TWI_IDR 0x0028
++#define TWI_IMR 0x002c
++#define TWI_RHR 0x0030
++#define TWI_THR 0x0034
+
-+/* SSC PDC Receive Counter Register */
-+#define SSC_PDC_RCR 0x00000104
++/* Bitfields in CR */
++#define TWI_START_OFFSET 0
++#define TWI_START_SIZE 1
++#define TWI_STOP_OFFSET 1
++#define TWI_STOP_SIZE 1
++#define TWI_MSEN_OFFSET 2
++#define TWI_MSEN_SIZE 1
++#define TWI_MSDIS_OFFSET 3
++#define TWI_MSDIS_SIZE 1
++#define TWI_SVEN_OFFSET 4
++#define TWI_SVEN_SIZE 1
++#define TWI_SVDIS_OFFSET 5
++#define TWI_SVDIS_SIZE 1
++#define TWI_SWRST_OFFSET 7
++#define TWI_SWRST_SIZE 1
+
-+/* SSC PDC Transmit Pointer Register */
-+#define SSC_PDC_TPR 0x00000108
++/* Bitfields in MMR */
++#define TWI_IADRSZ_OFFSET 8
++#define TWI_IADRSZ_SIZE 2
++#define TWI_MREAD_OFFSET 12
++#define TWI_MREAD_SIZE 1
++#define TWI_DADR_OFFSET 16
++#define TWI_DADR_SIZE 7
+
-+/* SSC PDC Receive Next Pointer Register */
-+#define SSC_PDC_RNPR 0x00000110
++/* Bitfields in SMR */
++#define TWI_SADR_OFFSET 16
++#define TWI_SADR_SIZE 7
+
-+/* SSC PDC Receive Next Counter Register */
-+#define SSC_PDC_RNCR 0x00000114
++/* Bitfields in IADR */
++#define TWI_IADR_OFFSET 0
++#define TWI_IADR_SIZE 24
+
-+/* SSC PDC Transmit Counter Register */
-+#define SSC_PDC_TCR 0x0000010c
++/* Bitfields in CWGR */
++#define TWI_CLDIV_OFFSET 0
++#define TWI_CLDIV_SIZE 8
++#define TWI_CHDIV_OFFSET 8
++#define TWI_CHDIV_SIZE 8
++#define TWI_CKDIV_OFFSET 16
++#define TWI_CKDIV_SIZE 3
+
-+/* SSC PDC Transmit Next Pointer Register */
-+#define SSC_PDC_TNPR 0x00000118
++/* Bitfields in SR */
++#define TWI_TXCOMP_OFFSET 0
++#define TWI_TXCOMP_SIZE 1
++#define TWI_RXRDY_OFFSET 1
++#define TWI_RXRDY_SIZE 1
++#define TWI_TXRDY_OFFSET 2
++#define TWI_TXRDY_SIZE 1
++#define TWI_SVDIR_OFFSET 3
++#define TWI_SVDIR_SIZE 1
++#define TWI_SVACC_OFFSET 4
++#define TWI_SVACC_SIZE 1
++#define TWI_GCACC_OFFSET 5
++#define TWI_GCACC_SIZE 1
++#define TWI_OVRE_OFFSET 6
++#define TWI_OVRE_SIZE 1
++#define TWI_UNRE_OFFSET 7
++#define TWI_UNRE_SIZE 1
++#define TWI_NACK_OFFSET 8
++#define TWI_NACK_SIZE 1
++#define TWI_ARBLST_OFFSET 9
++#define TWI_ARBLST_SIZE 1
+
-+/* SSC PDC Transmit Next Counter Register */
-+#define SSC_PDC_TNCR 0x0000011c
++/* Bitfields in RHR */
++#define TWI_RXDATA_OFFSET 0
++#define TWI_RXDATA_SIZE 8
+
-+/* SSC PDC Transfer Control Register */
-+#define SSC_PDC_PTCR 0x00000120
-+#define SSC_PDC_PTCR_RXTDIS_SIZE 1
-+#define SSC_PDC_PTCR_RXTDIS_OFFSET 1
-+#define SSC_PDC_PTCR_RXTEN_SIZE 1
-+#define SSC_PDC_PTCR_RXTEN_OFFSET 0
-+#define SSC_PDC_PTCR_TXTDIS_SIZE 1
-+#define SSC_PDC_PTCR_TXTDIS_OFFSET 9
-+#define SSC_PDC_PTCR_TXTEN_SIZE 1
-+#define SSC_PDC_PTCR_TXTEN_OFFSET 8
++/* Bitfields in THR */
++#define TWI_TXDATA_OFFSET 0
++#define TWI_TXDATA_SIZE 8
+
-+/* SSC PDC Transfer Status Register */
-+#define SSC_PDC_PTSR 0x00000124
-+#define SSC_PDC_PTSR_RXTEN_SIZE 1
-+#define SSC_PDC_PTSR_RXTEN_OFFSET 0
-+#define SSC_PDC_PTSR_TXTEN_SIZE 1
-+#define SSC_PDC_PTSR_TXTEN_OFFSET 8
++/* Constants for IADRSZ */
++#define TWI_IADRSZ_NO_ADDR 0
++#define TWI_IADRSZ_ONE_BYTE 1
++#define TWI_IADRSZ_TWO_BYTES 2
++#define TWI_IADRSZ_THREE_BYTES 3
+
+/* Bit manipulation macros */
-+#define SSC_BIT(name) \
-+ (1 << SSC_##name##_OFFSET)
-+#define SSC_BF(name, value) \
-+ (((value) & ((1 << SSC_##name##_SIZE) - 1)) \
-+ << SSC_##name##_OFFSET)
-+#define SSC_BFEXT(name, value) \
-+ (((value) >> SSC_##name##_OFFSET) \
-+ & ((1 << SSC_##name##_SIZE) - 1))
-+#define SSC_BFINS(name, value, old) \
-+ (((old) & ~(((1 << SSC_##name##_SIZE) - 1) \
-+ << SSC_##name##_OFFSET)) | SSC_BF(name, value))
++#define TWI_BIT(name) \
++ (1 << TWI_##name##_OFFSET)
++#define TWI_BF(name,value) \
++ (((value) & ((1 << TWI_##name##_SIZE) - 1)) \
++ << TWI_##name##_OFFSET)
++#define TWI_BFEXT(name,value) \
++ (((value) >> TWI_##name##_OFFSET) \
++ & ((1 << TWI_##name##_SIZE) - 1))
++#define TWI_BFINS(name,value,old) \
++ (((old) & ~(((1 << TWI_##name##_SIZE) - 1) \
++ << TWI_##name##_OFFSET)) \
++ | TWI_BF(name,value))
+
+/* Register access macros */
-+#define ssc_readl(base, reg) __raw_readl(base + SSC_##reg)
-+#define ssc_writel(base, reg, value) __raw_writel((value), base + SSC_##reg)
-+
-+#endif /* __INCLUDE_ATMEL_SSC_H */
-diff --git a/include/linux/gpio_mouse.h b/include/linux/gpio_mouse.h
-new file mode 100644
-index 0000000..44ed7aa
---- /dev/null
-+++ b/include/linux/gpio_mouse.h
-@@ -0,0 +1,61 @@
-+/*
-+ * Driver for simulating a mouse on GPIO lines.
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _GPIO_MOUSE_H
-+#define _GPIO_MOUSE_H
-+
-+#define GPIO_MOUSE_POLARITY_ACT_HIGH 0x00
-+#define GPIO_MOUSE_POLARITY_ACT_LOW 0x01
-+
-+#define GPIO_MOUSE_PIN_UP 0
-+#define GPIO_MOUSE_PIN_DOWN 1
-+#define GPIO_MOUSE_PIN_LEFT 2
-+#define GPIO_MOUSE_PIN_RIGHT 3
-+#define GPIO_MOUSE_PIN_BLEFT 4
-+#define GPIO_MOUSE_PIN_BMIDDLE 5
-+#define GPIO_MOUSE_PIN_BRIGHT 6
-+#define GPIO_MOUSE_PIN_MAX 7
-+
-+/**
-+ * struct gpio_mouse_platform_data
-+ * @scan_ms: integer in ms specifying the scan periode.
-+ * @polarity: Pin polarity, active high or low.
-+ * @up: GPIO line for up value.
-+ * @down: GPIO line for down value.
-+ * @left: GPIO line for left value.
-+ * @right: GPIO line for right value.
-+ * @bleft: GPIO line for left button.
-+ * @bmiddle: GPIO line for middle button.
-+ * @bright: GPIO line for right button.
-+ *
-+ * This struct must be added to the platform_device in the board code.
-+ * It is used by the gpio_mouse driver to setup GPIO lines and to
-+ * calculate mouse movement.
-+ */
-+struct gpio_mouse_platform_data {
-+ int scan_ms;
-+ int polarity;
-+
-+ union {
-+ struct {
-+ int up;
-+ int down;
-+ int left;
-+ int right;
-+
-+ int bleft;
-+ int bmiddle;
-+ int bright;
-+ };
-+ int pins[GPIO_MOUSE_PIN_MAX];
-+ };
-+};
++#define twi_readl(port,reg) \
++ __raw_readl((port)->regs + TWI_##reg)
++#define twi_writel(port,reg,value) \
++ __raw_writel((value), (port)->regs + TWI_##reg)
+
-+#endif /* _GPIO_MOUSE_H */
-diff --git a/include/linux/leds.h b/include/linux/leds.h
-index 88afcef..059abfe 100644
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -110,4 +110,18 @@ extern void ledtrig_ide_activity(void);
- #define ledtrig_ide_activity() do {} while(0)
- #endif
++#endif /* __ASM_AVR32_TWI_H__ */
+Index: linux-2.6.22.1/drivers/i2c/busses/Makefile
+===================================================================
+--- linux-2.6.22.1/drivers/i2c/busses/Makefile (revision 1)
++++ linux-2.6.22.1/drivers/i2c/busses/Makefile (arbetskopia)
+@@ -30,6 +30,7 @@
+ obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
+ obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
+ obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
++obj-$(CONFIG_I2C_PCA) += i2c-pca.o
+ obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
+ obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
+ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
+@@ -52,6 +53,7 @@
+ obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
+ obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
++obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
-+/* For the leds-gpio driver */
-+struct gpio_led {
-+ const char *name;
-+ char *default_trigger;
-+ unsigned gpio;
-+ u8 active_low;
-+};
-+
-+struct gpio_led_platform_data {
-+ int num_leds;
-+ struct gpio_led *leds;
-+};
-+
-+
- #endif /* __LINUX_LEDS_H_INCLUDED */
-diff --git a/include/linux/spi/at73c213.h b/include/linux/spi/at73c213.h
-new file mode 100644
-index 0000000..0f20a70
---- /dev/null
-+++ b/include/linux/spi/at73c213.h
-@@ -0,0 +1,25 @@
+ ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+ EXTRA_CFLAGS += -DDEBUG
+Index: linux-2.6.22.1/drivers/i2c/busses/i2c-pca.c
+===================================================================
+--- linux-2.6.22.1/drivers/i2c/busses/i2c-pca.c (revision 0)
++++ linux-2.6.22.1/drivers/i2c/busses/i2c-pca.c (revision 0)
+@@ -0,0 +1,213 @@
+/*
-+ * Board-specific data used to set up AT73c213 audio DAC driver.
-+ */
-+
-+#ifndef __LINUX_SPI_AT73C213_H
-+#define __LINUX_SPI_AT73C213_H
-+
-+/**
-+ * at73c213_board_info - how the external DAC is wired to the device.
++ * Platform driver for PCA9564 I2C bus controller.
+ *
-+ * @ssc_id: SSC platform_driver id the DAC shall use to stream the audio.
-+ * @dac_clk: the external clock used to provide master clock to the DAC.
-+ * @shortname: a short discription for the DAC, seen by userspace tools.
-+ *
-+ * This struct contains the configuration of the hardware connection to the
-+ * external DAC. The DAC needs a master clock and a I2S audio stream. It also
-+ * provides a name which is used to identify it in userspace tools.
-+ */
-+struct at73c213_board_info {
-+ int ssc_id;
-+ struct clk *dac_clk;
-+ char shortname[32];
-+};
-+
-+#endif /* __LINUX_SPI_AT73C213_H */
-diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild
-index 43f160c..6ce42bf 100644
---- a/include/linux/usb/Kbuild
-+++ b/include/linux/usb/Kbuild
-@@ -1,5 +1,6 @@
- unifdef-y += audio.h
- unifdef-y += cdc.h
- unifdef-y += ch9.h
-+unifdef-y += gadgetfs.h
- unifdef-y += midi.h
-
-diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h
-new file mode 100644
-index 0000000..e8654c3
---- /dev/null
-+++ b/include/linux/usb/gadgetfs.h
-@@ -0,0 +1,81 @@
-+#ifndef __LINUX_USB_GADGETFS_H
-+#define __LINUX_USB_GADGETFS_H
-+
-+#include <asm/types.h>
-+#include <asm/ioctl.h>
-+
-+#include <linux/usb/ch9.h>
-+
-+/*
-+ * Filesystem based user-mode API to USB Gadget controller hardware
++ * (C) 2006 Andrew Victor
+ *
-+ * Other than ep0 operations, most things are done by read() and write()
-+ * on endpoint files found in one directory. They are configured by
-+ * writing descriptors, and then may be used for normal stream style
-+ * i/o requests. When ep0 is configured, the device can enumerate;
-+ * when it's closed, the device disconnects from usb. Operations on
-+ * ep0 require ioctl() operations.
++ * Based on i2c-pca-isa.c driver for PCA9564 on ISA boards
++ * Copyright (C) 2004 Arcom Control Systems
+ *
-+ * Configuration and device descriptors get written to /dev/gadget/$CHIP,
-+ * which may then be used to read usb_gadgetfs_event structs. The driver
-+ * may activate endpoints as it handles SET_CONFIGURATION setup events,
-+ * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
-+ * then performing data transfers by reading or writing.
-+ */
-+
-+/*
-+ * Events are delivered on the ep0 file descriptor, when the user mode driver
-+ * reads from this file descriptor after writing the descriptors. Don't
-+ * stop polling this descriptor.
-+ */
-+
-+enum usb_gadgetfs_event_type {
-+ GADGETFS_NOP = 0,
-+
-+ GADGETFS_CONNECT,
-+ GADGETFS_DISCONNECT,
-+ GADGETFS_SETUP,
-+ GADGETFS_SUSPEND,
-+ // and likely more !
-+};
-+
-+/* NOTE: this structure must stay the same size and layout on
-+ * both 32-bit and 64-bit kernels.
-+ */
-+struct usb_gadgetfs_event {
-+ union {
-+ // NOP, DISCONNECT, SUSPEND: nothing
-+ // ... some hardware can't report disconnection
-+
-+ // CONNECT: just the speed
-+ enum usb_device_speed speed;
-+
-+ // SETUP: packet; DATA phase i/o precedes next event
-+ // (setup.bmRequestType & USB_DIR_IN) flags direction
-+ // ... includes SET_CONFIGURATION, SET_INTERFACE
-+ struct usb_ctrlrequest setup;
-+ } u;
-+ enum usb_gadgetfs_event_type type;
-+};
-+
-+
-+/* endpoint ioctls */
-+
-+/* IN transfers may be reported to the gadget driver as complete
-+ * when the fifo is loaded, before the host reads the data;
-+ * OUT transfers may be reported to the host's "client" driver as
-+ * complete when they're sitting in the FIFO unread.
-+ * THIS returns how many bytes are "unclaimed" in the endpoint fifo
-+ * (needed for precise fault handling, when the hardware allows it)
-+ */
-+#define GADGETFS_FIFO_STATUS _IO('g',1)
-+
-+/* discards any unclaimed data in the fifo. */
-+#define GADGETFS_FIFO_FLUSH _IO('g',2)
-+
-+/* resets endpoint halt+toggle; used to implement set_interface.
-+ * some hardware (like pxa2xx) can't support this.
-+ */
-+#define GADGETFS_CLEAR_HALT _IO('g',3)
-+
-+#endif /* __LINUX_USB_GADGETFS_H */
-diff --git a/include/linux/usb_gadgetfs.h b/include/linux/usb_gadgetfs.h
-deleted file mode 100644
-index 8086d5a..0000000
---- a/include/linux/usb_gadgetfs.h
-+++ /dev/null
-@@ -1,75 +0,0 @@
--
--#include <asm/types.h>
--#include <asm/ioctl.h>
--
--#include <linux/usb/ch9.h>
--
--/*
-- * Filesystem based user-mode API to USB Gadget controller hardware
-- *
-- * Almost everything can be done with only read and write operations,
-- * on endpoint files found in one directory. They are configured by
-- * writing descriptors, and then may be used for normal stream style
-- * i/o requests. When ep0 is configured, the device can enumerate;
-- * when it's closed, the device disconnects from usb.
-- *
-- * Configuration and device descriptors get written to /dev/gadget/$CHIP,
-- * which may then be used to read usb_gadgetfs_event structs. The driver
-- * may activate endpoints as it handles SET_CONFIGURATION setup events,
-- * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
-- * then performing data transfers by reading or writing.
-- */
--
--/*
-- * Events are delivered on the ep0 file descriptor, if the user mode driver
-- * reads from this file descriptor after writing the descriptors. Don't
-- * stop polling this descriptor, if you write that kind of driver.
-- */
--
--enum usb_gadgetfs_event_type {
-- GADGETFS_NOP = 0,
--
-- GADGETFS_CONNECT,
-- GADGETFS_DISCONNECT,
-- GADGETFS_SETUP,
-- GADGETFS_SUSPEND,
-- // and likely more !
--};
--
--struct usb_gadgetfs_event {
-- enum usb_gadgetfs_event_type type;
-- union {
-- // NOP, DISCONNECT, SUSPEND: nothing
-- // ... some hardware can't report disconnection
--
-- // CONNECT: just the speed
-- enum usb_device_speed speed;
--
-- // SETUP: packet; DATA phase i/o precedes next event
-- // (setup.bmRequestType & USB_DIR_IN) flags direction
-- // ... includes SET_CONFIGURATION, SET_INTERFACE
-- struct usb_ctrlrequest setup;
-- } u;
--};
--
--
--/* endpoint ioctls */
--
--/* IN transfers may be reported to the gadget driver as complete
-- * when the fifo is loaded, before the host reads the data;
-- * OUT transfers may be reported to the host's "client" driver as
-- * complete when they're sitting in the FIFO unread.
-- * THIS returns how many bytes are "unclaimed" in the endpoint fifo
-- * (needed for precise fault handling, when the hardware allows it)
-- */
--#define GADGETFS_FIFO_STATUS _IO('g',1)
--
--/* discards any unclaimed data in the fifo. */
--#define GADGETFS_FIFO_FLUSH _IO('g',2)
--
--/* resets endpoint halt+toggle; used to implement set_interface.
-- * some hardware (like pxa2xx) can't support this.
-- */
--#define GADGETFS_CLEAR_HALT _IO('g',3)
--
--
-diff --git a/init/do_mounts.c b/init/do_mounts.c
-index 46fe407..efc134c 100644
---- a/init/do_mounts.c
-+++ b/init/do_mounts.c
-@@ -25,6 +25,7 @@ int __initdata rd_doload; /* 1 = load RAM disk, 0 = don't load */
- int root_mountflags = MS_RDONLY | MS_SILENT;
- char * __initdata root_device_name;
- static char __initdata saved_root_name[64];
-+int __initdata root_wait;
-
- dev_t ROOT_DEV;
-
-@@ -216,6 +217,14 @@ static int __init root_dev_setup(char *line)
-
- __setup("root=", root_dev_setup);
-
-+static int __init rootwait_setup(char *line)
-+{
-+ root_wait = simple_strtol(line,NULL,0);
-+ return 1;
-+}
-+
-+__setup("rootwait=", rootwait_setup);
-+
- static char * __initdata root_mount_data;
- static int __init root_data_setup(char *str)
- {
-@@ -438,11 +447,24 @@ void __init prepare_namespace(void)
- root_device_name += 5;
- }
-
-- is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
--
- if (initrd_load())
- goto out;
-
-+ /* wait for any asynchronous scanning to complete */
-+ if ((ROOT_DEV == 0) && root_wait) {
-+ printk(KERN_INFO "Waiting for root device %s...\n",
-+ saved_root_name);
-+ do {
-+ while (driver_probe_done() != 0)
-+ msleep(100);
-+ ROOT_DEV = name_to_dev_t(saved_root_name);
-+ if (ROOT_DEV == 0)
-+ msleep(100);
-+ } while (ROOT_DEV == 0);
-+ }
-+
-+ is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
-+
- if (is_floppy && rd_doload && rd_load_disk(0))
- ROOT_DEV = Root_RAM0;
-
-diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
-index f7844f6..6631586 100755
---- a/scripts/checkstack.pl
-+++ b/scripts/checkstack.pl
-@@ -12,6 +12,7 @@
- # sh64 port by Paul Mundt
- # Random bits by Matt Mackall <mpm@selenic.com>
- # M68k port by Geert Uytterhoeven and Andreas Schwab
-+# AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
- #
- # Usage:
- # objdump -d vmlinux | stackcheck.pl [arch]
-@@ -37,6 +38,10 @@ my (@stack, $re, $x, $xs);
- if ($arch eq 'arm') {
- #c0008ffc: e24dd064 sub sp, sp, #100 ; 0x64
- $re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
-+ } elsif ($arch eq 'avr32') {
-+ #8000008a: 20 1d sub sp,4
-+ #80000ca8: fa cd 05 b0 sub sp,sp,1456
-+ $re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
- } elsif ($arch =~ /^i[3456]86$/) {
- #c0105234: 81 ec ac 05 00 00 sub $0x5ac,%esp
- $re = qr/^.*[as][du][db] \$(0x$x{1,8}),\%esp$/o;
-diff --git a/sound/Kconfig b/sound/Kconfig
-index 9ea4738..9217739 100644
---- a/sound/Kconfig
-+++ b/sound/Kconfig
-@@ -63,9 +63,13 @@ source "sound/aoa/Kconfig"
-
- source "sound/arm/Kconfig"
-
-+if SPI
-+source "sound/spi/Kconfig"
-+endif
-+
- source "sound/mips/Kconfig"
-
--# the following will depend on the order of config.
-+# tee following will depend on the order of config.
- # here assuming USB is defined before ALSA
- source "sound/usb/Kconfig"
-
-diff --git a/sound/Makefile b/sound/Makefile
-index b7c7fb7..581ea5e 100644
---- a/sound/Makefile
-+++ b/sound/Makefile
-@@ -5,7 +5,8 @@ obj-$(CONFIG_SOUND) += soundcore.o
- obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o
- obj-$(CONFIG_SOUND_PRIME) += oss/
- obj-$(CONFIG_DMASOUND) += oss/
--obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/ soc/
-+obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ \
-+ sparc/ spi/ parisc/ pcmcia/ mips/ soc/
- obj-$(CONFIG_SND_AOA) += aoa/
-
- # This one must be compilable even if sound is configured out
-diff --git a/sound/spi/Kconfig b/sound/spi/Kconfig
-new file mode 100644
-index 0000000..0d08c29
---- /dev/null
-+++ b/sound/spi/Kconfig
-@@ -0,0 +1,31 @@
-+#SPI drivers
-+
-+menu "SPI devices"
-+ depends on SND != n
-+
-+config SND_AT73C213
-+ tristate "Atmel AT73C213 DAC driver"
-+ depends on ATMEL_SSC
-+ select SND_PCM
-+ help
-+ Say Y here if you want to use the Atmel AT73C213 external DAC. This
-+ DAC can be found on Atmel development boards.
-+
-+ This driver requires the Atmel SSC driver for sound sink, a
-+ peripheral found on most AT91 and AVR32 microprocessors.
-+
-+ To compile this driver as a module, choose M here: the module will be
-+ called snd-at73c213.
-+
-+config SND_AT73C213_TARGET_BITRATE
-+ int "Target bitrate for AT73C213"
-+ depends on SND_AT73C213
-+ default "48000"
-+ range 8000 50000
-+ help
-+ Sets the target bitrate for the bitrate calculator in the driver.
-+ Limited by hardware to be between 8000 Hz and 50000 Hz.
-+
-+ Set to 48000 Hz by default.
-+
-+endmenu
-diff --git a/sound/spi/Makefile b/sound/spi/Makefile
-new file mode 100644
-index 0000000..026fb73
---- /dev/null
-+++ b/sound/spi/Makefile
-@@ -0,0 +1,5 @@
-+# Makefile for SPI drivers
-+
-+snd-at73c213-objs := at73c213.o
-+
-+obj-$(CONFIG_SND_AT73C213) += snd-at73c213.o
-diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
-new file mode 100644
-index 0000000..f514f47
---- /dev/null
-+++ b/sound/spi/at73c213.c
-@@ -0,0 +1,1121 @@
-+/*
-+ * Driver for AT73C213 16-bit stereo DAC connected to Atmel SSC
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
+ *
-+ * Copyright (C) 2006-2007 Atmel Norway
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
-+/*#define DEBUG*/
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
-+#include <linux/module.h>
++#include <linux/wait.h>
+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+
-+#include <sound/driver.h>
-+#include <sound/initval.h>
-+#include <sound/control.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+
-+#include <linux/atmel-ssc.h>
-+
-+#include <linux/spi/spi.h>
-+#include <linux/spi/at73c213.h>
-+
-+#include "at73c213.h"
-+
-+#define BITRATE_MIN 8000 /* Hardware limit? */
-+#define BITRATE_TARGET CONFIG_SND_AT73C213_TARGET_BITRATE
-+#define BITRATE_MAX 50000 /* Hardware limit. */
-+
-+/* Initial (hardware reset) AT73C213 register values. */
-+static u8 snd_at73c213_original_image[18] =
-+{
-+ 0x00, /* 00 - CTRL */
-+ 0x05, /* 01 - LLIG */
-+ 0x05, /* 02 - RLIG */
-+ 0x08, /* 03 - LPMG */
-+ 0x08, /* 04 - RPMG */
-+ 0x00, /* 05 - LLOG */
-+ 0x00, /* 06 - RLOG */
-+ 0x22, /* 07 - OLC */
-+ 0x09, /* 08 - MC */
-+ 0x00, /* 09 - CSFC */
-+ 0x00, /* 0A - MISC */
-+ 0x00, /* 0B - */
-+ 0x00, /* 0C - PRECH */
-+ 0x05, /* 0D - AUXG */
-+ 0x00, /* 0E - */
-+ 0x00, /* 0F - */
-+ 0x00, /* 10 - RST */
-+ 0x00, /* 11 - PA_CTRL */
-+};
-+
-+struct snd_at73c213 {
-+ struct snd_card *card;
-+ struct snd_pcm *pcm;
-+ struct snd_pcm_substream *substream;
-+ struct at73c213_board_info *board;
-+ int irq;
-+ int period;
-+ unsigned long bitrate;
-+ struct clk *bitclk;
-+ struct ssc_device *ssc;
-+ struct spi_device *spi;
-+ u8 spi_wbuffer[2];
-+ u8 spi_rbuffer[2];
-+ /* Image of the SPI registers in AT73C213. */
-+ u8 reg_image[18];
-+ /* Protect registers against concurrent access. */
-+ spinlock_t lock;
-+};
-+
-+#define get_chip(card) ((struct snd_at73c213 *)card->private_data)
-+
-+static int
-+snd_at73c213_write_reg(struct snd_at73c213 *chip, u8 reg, u8 val)
-+{
-+ struct spi_message msg;
-+ struct spi_transfer msg_xfer = {
-+ .len = 2,
-+ .cs_change = 0,
-+ };
-+ int retval;
-+
-+ spi_message_init(&msg);
-+
-+ chip->spi_wbuffer[0] = reg;
-+ chip->spi_wbuffer[1] = val;
-+
-+ msg_xfer.tx_buf = chip->spi_wbuffer;
-+ msg_xfer.rx_buf = chip->spi_rbuffer;
-+ spi_message_add_tail(&msg_xfer, &msg);
-+
-+ retval = spi_sync(chip->spi, &msg);
-+
-+ if (!retval)
-+ chip->reg_image[reg] = val;
-+
-+ return retval;
-+}
-+
-+static struct snd_pcm_hardware snd_at73c213_playback_hw = {
-+ .info = SNDRV_PCM_INFO_INTERLEAVED |
-+ SNDRV_PCM_INFO_BLOCK_TRANSFER,
-+ .formats = SNDRV_PCM_FMTBIT_S16_BE,
-+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
-+ .rate_min = 8000, /* Replaced by chip->bitrate later. */
-+ .rate_max = 50000, /* Replaced by chip->bitrate later. */
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .buffer_bytes_max = 64 * 1024 - 1,
-+ .period_bytes_min = 512,
-+ .period_bytes_max = 64 * 1024 - 1,
-+ .periods_min = 4,
-+ .periods_max = 1024,
-+};
-+
-+/*
-+ * Calculate and set bitrate and divisions.
-+ */
-+static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip)
-+{
-+ unsigned long ssc_rate = clk_get_rate(chip->ssc->clk);
-+ unsigned long dac_rate_new, ssc_div, status;
-+ unsigned long ssc_div_max, ssc_div_min;
-+ int max_tries;
-+
-+ /*
-+ * We connect two clocks here, picking divisors so the I2S clocks
-+ * out data at the same rate the DAC clocks it in ... and as close
-+ * as practical to the desired target rate.
-+ *
-+ * The DAC master clock (MCLK) is programmable, and is either 256
-+ * or (not here) 384 times the I2S output clock (BCLK).
-+ */
-+
-+ /* SSC clock / (bitrate * stereo * 16-bit). */
-+ ssc_div = ssc_rate / (BITRATE_TARGET * 2 * 16);
-+ ssc_div_min = ssc_rate / (BITRATE_MAX * 2 * 16);
-+ ssc_div_max = ssc_rate / (BITRATE_MIN * 2 * 16);
-+ max_tries = (ssc_div_max - ssc_div_min) / 2;
-+
-+ if (max_tries < 1)
-+ max_tries = 1;
-+
-+ /* ssc_div must be a power of 2. */
-+ ssc_div = (ssc_div + 1) & ~1UL;
-+
-+ if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) {
-+ ssc_div -= 2;
-+ if ((ssc_rate / (ssc_div * 2 * 16)) > BITRATE_MAX)
-+ return -ENXIO;
-+ }
-+
-+ /* Search for a possible bitrate. */
-+ do {
-+ /* SSC clock / (ssc divider * 16-bit * stereo). */
-+ if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN)
-+ return -ENXIO;
-+
-+ /* 256 / (2 * 16) = 8 */
-+ dac_rate_new = 8 * (ssc_rate / ssc_div);
-+
-+ status = clk_round_rate(chip->board->dac_clk, dac_rate_new);
-+ if (status < 0)
-+ return status;
-+
-+ /* Ignore difference smaller than 256 Hz. */
-+ if ((status/256) == (dac_rate_new/256))
-+ goto set_rate;
-+
-+ ssc_div += 2;
-+ } while (--max_tries);
-+
-+ /* Not able to find a valid bitrate. */
-+ return -ENXIO;
-+
-+set_rate:
-+ status = clk_set_rate(chip->board->dac_clk, status);
-+ if (status < 0)
-+ return status;
-+
-+ /* Set divider in SSC device. */
-+ ssc_writel(chip->ssc->regs, CMR, ssc_div/2);
-+
-+ /* SSC clock / (ssc divider * 16-bit * stereo). */
-+ chip->bitrate = ssc_rate / (ssc_div * 16 * 2);
-+
-+ dev_info(&chip->spi->dev,
-+ "at73c213: supported bitrate is %lu (%lu divider)\n",
-+ chip->bitrate, ssc_div);
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+ snd_at73c213_playback_hw.rate_min = chip->bitrate;
-+ snd_at73c213_playback_hw.rate_max = chip->bitrate;
-+ runtime->hw = snd_at73c213_playback_hw;
-+ chip->substream = substream;
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_pcm_close(struct snd_pcm_substream *substream)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ chip->substream = NULL;
-+ return 0;
-+}
-+
-+static int snd_at73c213_pcm_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *hw_params)
-+{
-+ return snd_pcm_lib_malloc_pages(substream,
-+ params_buffer_bytes(hw_params));
-+}
-+
-+static int snd_at73c213_pcm_hw_free(struct snd_pcm_substream *substream)
-+{
-+ return snd_pcm_lib_free_pages(substream);
-+}
-+
-+static int snd_at73c213_pcm_prepare(struct snd_pcm_substream *substream)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ int block_size;
-+
-+ block_size = frames_to_bytes(runtime, runtime->period_size);
-+
-+ chip->period = 0;
-+
-+ ssc_writel(chip->ssc->regs, PDC_TPR,
-+ (long)runtime->dma_addr);
-+ ssc_writel(chip->ssc->regs, PDC_TCR, runtime->period_size * 2);
-+ ssc_writel(chip->ssc->regs, PDC_TNPR,
-+ (long)runtime->dma_addr + block_size);
-+ ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_pcm_trigger(struct snd_pcm_substream *substream,
-+ int cmd)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ int retval = 0;
-+
-+ spin_lock(&chip->lock);
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ ssc_writel(chip->ssc->regs, IER, SSC_BIT(IER_ENDTX));
-+ ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTEN));
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTDIS));
-+ ssc_writel(chip->ssc->regs, IDR, SSC_BIT(IDR_ENDTX));
-+ break;
-+ default:
-+ dev_dbg(&chip->spi->dev, "spurious command %x\n", cmd);
-+ retval = -EINVAL;
-+ break;
-+ }
-+
-+ spin_unlock(&chip->lock);
-+
-+ return retval;
-+}
-+
-+static snd_pcm_uframes_t
-+snd_at73c213_pcm_pointer(struct snd_pcm_substream *substream)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ snd_pcm_uframes_t pos;
-+ unsigned long bytes;
-+
-+ bytes = ssc_readl(chip->ssc->regs, PDC_TPR)
-+ - (unsigned long)runtime->dma_addr;
-+
-+ pos = bytes_to_frames(runtime, bytes);
-+ if (pos >= runtime->buffer_size)
-+ pos -= runtime->buffer_size;
-+
-+ return pos;
-+}
-+
-+static struct snd_pcm_ops at73c213_playback_ops = {
-+ .open = snd_at73c213_pcm_open,
-+ .close = snd_at73c213_pcm_close,
-+ .ioctl = snd_pcm_lib_ioctl,
-+ .hw_params = snd_at73c213_pcm_hw_params,
-+ .hw_free = snd_at73c213_pcm_hw_free,
-+ .prepare = snd_at73c213_pcm_prepare,
-+ .trigger = snd_at73c213_pcm_trigger,
-+ .pointer = snd_at73c213_pcm_pointer,
-+};
-+
-+static void snd_at73c213_pcm_free(struct snd_pcm *pcm)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_chip(pcm);
-+ if (chip->pcm) {
-+ snd_pcm_lib_preallocate_free_for_all(chip->pcm);
-+ chip->pcm = NULL;
-+ }
-+}
-+
-+static int __devinit snd_at73c213_pcm_new(struct snd_at73c213 *chip, int device)
-+{
-+ struct snd_pcm *pcm;
-+ int retval;
-+
-+ retval = snd_pcm_new(chip->card, chip->card->shortname,
-+ device, 1, 0, &pcm);
-+ if (retval < 0)
-+ goto out;
+
-+ pcm->private_data = chip;
-+ pcm->private_free = snd_at73c213_pcm_free;
-+ pcm->info_flags = SNDRV_PCM_INFO_BLOCK_TRANSFER;
-+ strcpy(pcm->name, "at73c213");
-+ chip->pcm = pcm;
-+
-+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &at73c213_playback_ops);
-+
-+ retval = snd_pcm_lib_preallocate_pages_for_all(chip->pcm,
-+ SNDRV_DMA_TYPE_DEV, &chip->ssc->pdev->dev,
-+ 64 * 1024, 64 * 1024);
-+out:
-+ return retval;
-+}
-+
-+static irqreturn_t snd_at73c213_interrupt(int irq, void *dev_id)
-+{
-+ struct snd_at73c213 *chip = dev_id;
-+ struct snd_pcm_runtime *runtime = chip->substream->runtime;
-+ u32 status;
-+ int offset;
-+ int block_size;
-+ int next_period;
-+ int retval = IRQ_NONE;
-+
-+ spin_lock(&chip->lock);
++#include <linux/i2c.h>
++#include <linux/i2c-algo-pca.h>
+
-+ block_size = frames_to_bytes(runtime, runtime->period_size);
-+ status = ssc_readl(chip->ssc->regs, IMR);
++#include <asm/io.h>
+
-+ if (status & SSC_BIT(IMR_ENDTX)) {
-+ chip->period++;
-+ if (chip->period == runtime->periods)
-+ chip->period = 0;
-+ next_period = chip->period + 1;
-+ if (next_period == runtime->periods)
-+ next_period = 0;
++#include "../algos/i2c-algo-pca.h"
+
-+ offset = block_size * next_period;
++#define PCA_OWN_ADDRESS 0x55 /* our address for slave mode */
++#define PCA_CLOCK I2C_PCA_CON_59kHz
+
-+ ssc_writel(chip->ssc->regs, PDC_TNPR,
-+ (long)runtime->dma_addr + offset);
-+ ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
-+ retval = IRQ_HANDLED;
-+ }
++//#define REG_SHIFT 2
++#define REG_SHIFT 0
+
-+ ssc_readl(chip->ssc->regs, IMR);
-+ spin_unlock(&chip->lock);
++//#define DEBUG_IO
+
-+ if (status & SSC_BIT(IMR_ENDTX))
-+ snd_pcm_period_elapsed(chip->substream);
++#define PCA_IO_SIZE 4
+
-+ return retval;
-+}
++static void __iomem *base_addr;
++static int irq;
++static wait_queue_head_t pca_wait;
+
-+/*
-+ * Mixer functions.
-+ */
-+static int snd_at73c213_mono_get(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
++static int pca_getown(struct i2c_algo_pca_data *adap)
+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ int reg = kcontrol->private_value & 0xff;
-+ int shift = (kcontrol->private_value >> 8) & 0xff;
-+ int mask = (kcontrol->private_value >> 16) & 0xff;
-+ int invert = (kcontrol->private_value >> 24) & 0xff;
-+
-+ spin_lock_irq(&chip->lock);
-+
-+ ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & mask;
-+
-+ if (invert)
-+ ucontrol->value.integer.value[0] =
-+ (mask - ucontrol->value.integer.value[0]);
-+
-+ spin_unlock_irq(&chip->lock);
-+
-+ return 0;
++ return PCA_OWN_ADDRESS;
+}
+
-+static int snd_at73c213_mono_put(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
++static int pca_getclock(struct i2c_algo_pca_data *adap)
+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ int reg = kcontrol->private_value & 0xff;
-+ int shift = (kcontrol->private_value >> 8) & 0xff;
-+ int mask = (kcontrol->private_value >> 16) & 0xff;
-+ int invert = (kcontrol->private_value >> 24) & 0xff;
-+ int change, retval;
-+ unsigned short val;
-+
-+ val = (ucontrol->value.integer.value[0] & mask);
-+ if (invert)
-+ val = mask - val;
-+ val <<= shift;
-+
-+ spin_lock_irq(&chip->lock);
-+
-+ val = (chip->reg_image[reg] & ~(mask << shift)) | val;
-+ change = val != chip->reg_image[reg];
-+ retval = snd_at73c213_write_reg(chip, reg, val);
-+
-+ spin_unlock_irq(&chip->lock);
-+
-+ if (retval)
-+ return retval;
-+
-+ return change;
++ return PCA_CLOCK;
+}
+
-+static int snd_at73c213_stereo_info(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
++static void pca_writebyte(struct i2c_algo_pca_data *adap, int reg, int val)
+{
-+ int mask = (kcontrol->private_value >> 24) & 0xff;
-+
-+ if (mask == 1)
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-+ else
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+
-+ uinfo->count = 2;
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = mask;
-+
-+ return 0;
++#ifdef DEBUG_IO
++ static char *names[] = { "T/O", "DAT", "ADR", "CON" };
++ printk("*** write %s at %#lx <= %#04x\n", names[reg], (unsigned long) base_addr+reg, val);
++#endif
++ udelay(1);
++ outb(val, base_addr + (reg << REG_SHIFT));
+}
+
-+static int snd_at73c213_stereo_get(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
++static int pca_readbyte(struct i2c_algo_pca_data *adap, int reg)
+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ int left_reg = kcontrol->private_value & 0xff;
-+ int right_reg = (kcontrol->private_value >> 8) & 0xff;
-+ int shift_left = (kcontrol->private_value >> 16) & 0x07;
-+ int shift_right = (kcontrol->private_value >> 19) & 0x07;
-+ int mask = (kcontrol->private_value >> 24) & 0xff;
-+ int invert = (kcontrol->private_value >> 22) & 1;
-+
-+ spin_lock_irq(&chip->lock);
-+
-+ ucontrol->value.integer.value[0] =
-+ (chip->reg_image[left_reg] >> shift_left) & mask;
-+ ucontrol->value.integer.value[1] =
-+ (chip->reg_image[right_reg] >> shift_right) & mask;
++ int res;
+
-+ if (invert) {
-+ ucontrol->value.integer.value[0] =
-+ (mask - ucontrol->value.integer.value[0]);
-+ ucontrol->value.integer.value[1] =
-+ (mask - ucontrol->value.integer.value[1]);
++ udelay(1);
++ res = inb(base_addr + (reg << REG_SHIFT));
++#ifdef DEBUG_IO
++ {
++ static char *names[] = { "STA", "DAT", "ADR", "CON" };
++ printk("*** read %s => %#04x\n", names[reg], res);
+ }
-+
-+ spin_unlock_irq(&chip->lock);
-+
-+ return 0;
++#endif
++ return res;
+}
+
-+static int snd_at73c213_stereo_put(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
++static int pca_waitforinterrupt(struct i2c_algo_pca_data *adap)
+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ int left_reg = kcontrol->private_value & 0xff;
-+ int right_reg = (kcontrol->private_value >> 8) & 0xff;
-+ int shift_left = (kcontrol->private_value >> 16) & 0x07;
-+ int shift_right = (kcontrol->private_value >> 19) & 0x07;
-+ int mask = (kcontrol->private_value >> 24) & 0xff;
-+ int invert = (kcontrol->private_value >> 22) & 1;
-+ int change, retval;
-+ unsigned short val1, val2;
-+
-+ val1 = ucontrol->value.integer.value[0] & mask;
-+ val2 = ucontrol->value.integer.value[1] & mask;
-+ if (invert) {
-+ val1 = mask - val1;
-+ val2 = mask - val2;
-+ }
-+ val1 <<= shift_left;
-+ val2 <<= shift_right;
-+
-+ spin_lock_irq(&chip->lock);
++ int ret = 0;
+
-+ val1 = (chip->reg_image[left_reg] & ~(mask << shift_left)) | val1;
-+ val2 = (chip->reg_image[right_reg] & ~(mask << shift_right)) | val2;
-+ change = val1 != chip->reg_image[left_reg]
-+ || val2 != chip->reg_image[right_reg];
-+ retval = snd_at73c213_write_reg(chip, left_reg, val1);
-+ if (retval) {
-+ spin_unlock_irq(&chip->lock);
-+ goto out;
-+ }
-+ retval = snd_at73c213_write_reg(chip, right_reg, val2);
-+ if (retval) {
-+ spin_unlock_irq(&chip->lock);
-+ goto out;
++ if (irq > -1) {
++ ret = wait_event_interruptible(pca_wait,
++ pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI);
++ } else {
++ while ((pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
++ udelay(100);
+ }
-+
-+ spin_unlock_irq(&chip->lock);
-+
-+ return change;
-+
-+out:
-+ return retval;
-+}
-+
-+static int snd_at73c213_mono_switch_info(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-+ uinfo->count = 1;
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = 1;
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_mono_switch_get(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ int reg = kcontrol->private_value & 0xff;
-+ int shift = (kcontrol->private_value >> 8) & 0xff;
-+ int invert = (kcontrol->private_value >> 24) & 0xff;
-+
-+ spin_lock_irq(&chip->lock);
-+
-+ ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & 0x01;
-+
-+ if (invert)
-+ ucontrol->value.integer.value[0] =
-+ (0x01 - ucontrol->value.integer.value[0]);
-+
-+ spin_unlock_irq(&chip->lock);
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_mono_switch_put(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ int reg = kcontrol->private_value & 0xff;
-+ int shift = (kcontrol->private_value >> 8) & 0xff;
-+ int mask = (kcontrol->private_value >> 16) & 0xff;
-+ int invert = (kcontrol->private_value >> 24) & 0xff;
-+ int change, retval;
-+ unsigned short val;
-+
-+ if (ucontrol->value.integer.value[0])
-+ val = mask;
-+ else
-+ val = 0;
-+
-+ if (invert)
-+ val = mask - val;
-+ val <<= shift;
-+
-+ spin_lock_irq(&chip->lock);
-+
-+ val |= (chip->reg_image[reg] & ~(mask << shift));
-+ change = val != chip->reg_image[reg];
-+
-+ retval = snd_at73c213_write_reg(chip, reg, val);
-+
-+ spin_unlock_irq(&chip->lock);
-+
-+ if (retval)
-+ return retval;
-+
-+ return change;
-+}
-+
-+static int snd_at73c213_pa_volume_info(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 1;
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = ((kcontrol->private_value >> 16) & 0xff) - 1;
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_line_capture_volume_info(
-+ struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 2;
-+ /* When inverted will give values 0x10001 => 0. */
-+ uinfo->value.integer.min = 14;
-+ uinfo->value.integer.max = 31;
-+
-+ return 0;
++ return ret;
+}
+
-+static int snd_at73c213_aux_capture_volume_info(
-+ struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
++static irqreturn_t pca_handler(int this_irq, void *dev_id)
+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 1;
-+ /* When inverted will give values 0x10001 => 0. */
-+ uinfo->value.integer.min = 14;
-+ uinfo->value.integer.max = 31;
-+
-+ return 0;
-+}
-+
-+#define AT73C213_MONO_SWITCH(xname, xindex, reg, shift, mask, invert) \
-+{ \
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
-+ .name = xname, \
-+ .index = xindex, \
-+ .info = snd_at73c213_mono_switch_info, \
-+ .get = snd_at73c213_mono_switch_get, \
-+ .put = snd_at73c213_mono_switch_put, \
-+ .private_value = (reg | (shift << 8) | (mask << 16) | (invert << 24)) \
-+}
-+
-+#define AT73C213_STEREO(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
-+{ \
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
-+ .name = xname, \
-+ .index = xindex, \
-+ .info = snd_at73c213_stereo_info, \
-+ .get = snd_at73c213_stereo_get, \
-+ .put = snd_at73c213_stereo_put, \
-+ .private_value = (left_reg | (right_reg << 8) \
-+ | (shift_left << 16) | (shift_right << 19) \
-+ | (mask << 24) | (invert << 22)) \
++ wake_up_interruptible(&pca_wait);
++ return IRQ_HANDLED;
+}
+
-+static struct snd_kcontrol_new snd_at73c213_controls[] __devinitdata = {
-+AT73C213_STEREO("Master Playback Volume", 0, DAC_LMPG, DAC_RMPG, 0, 0, 0x1f, 1),
-+AT73C213_STEREO("Master Playback Switch", 0, DAC_LMPG, DAC_RMPG, 5, 5, 1, 1),
-+AT73C213_STEREO("PCM Playback Volume", 0, DAC_LLOG, DAC_RLOG, 0, 0, 0x1f, 1),
-+AT73C213_STEREO("PCM Playback Switch", 0, DAC_LLOG, DAC_RLOG, 5, 5, 1, 1),
-+AT73C213_MONO_SWITCH("Mono PA Playback Switch", 0, DAC_CTRL, DAC_CTRL_ONPADRV, 0x01, 0),
-+{
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .name = "PA Playback Volume",
-+ .index = 0,
-+ .info = snd_at73c213_pa_volume_info,
-+ .get = snd_at73c213_mono_get,
-+ .put = snd_at73c213_mono_put,
-+ .private_value = PA_CTRL | (PA_CTRL_APAGAIN << 8) | (0x0f << 16) | (1 << 24),
-+},
-+AT73C213_MONO_SWITCH("PA High Gain Playback Switch", 0, PA_CTRL, PA_CTRL_APALP, 0x01, 1),
-+AT73C213_MONO_SWITCH("PA Playback Switch", 0, PA_CTRL, PA_CTRL_APAON, 0x01, 0),
-+{
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .name = "Aux Capture Volume",
-+ .index = 0,
-+ .info = snd_at73c213_aux_capture_volume_info,
-+ .get = snd_at73c213_mono_get,
-+ .put = snd_at73c213_mono_put,
-+ .private_value = DAC_AUXG | (0 << 8) | (0x1f << 16) | (1 << 24),
-+},
-+AT73C213_MONO_SWITCH("Aux Capture Switch", 0, DAC_CTRL, DAC_CTRL_ONAUXIN, 0x01, 0),
-+{
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .name = "Line Capture Volume",
-+ .index = 0,
-+ .info = snd_at73c213_line_capture_volume_info,
-+ .get = snd_at73c213_stereo_get,
-+ .put = snd_at73c213_stereo_put,
-+ .private_value = DAC_LLIG | (DAC_RLIG << 8) | (0 << 16) | (0 << 19)
-+ | (0x1f << 24) | (1 << 22),
-+},
-+AT73C213_MONO_SWITCH("Line Capture Switch", 0, DAC_CTRL, 0, 0x03, 0),
++static struct i2c_algo_pca_data pca_i2c_data = {
++ .get_own = pca_getown,
++ .get_clock = pca_getclock,
++ .write_byte = pca_writebyte,
++ .read_byte = pca_readbyte,
++ .wait_for_interrupt = pca_waitforinterrupt,
+};
+
-+static int __devinit snd_at73c213_mixer(struct snd_at73c213 *chip)
-+{
-+ struct snd_card *card;
-+ int errval, idx;
-+
-+ if (chip == NULL || chip->pcm == NULL)
-+ return -EINVAL;
-+
-+ card = chip->card;
-+
-+ strcpy(card->mixername, chip->pcm->name);
-+
-+ for (idx = 0; idx < ARRAY_SIZE(snd_at73c213_controls); idx++) {
-+ errval = snd_ctl_add(card,
-+ snd_ctl_new1(&snd_at73c213_controls[idx],
-+ chip));
-+ if (errval < 0)
-+ goto cleanup;
-+ }
-+
-+ return 0;
-+
-+cleanup:
-+ for (idx = 1; idx < ARRAY_SIZE(snd_at73c213_controls) + 1; idx++) {
-+ struct snd_kcontrol *kctl;
-+ kctl = snd_ctl_find_numid(card, idx);
-+ if (kctl)
-+ snd_ctl_remove(card, kctl);
-+ }
-+ return errval;
-+}
-+
-+/*
-+ * Device functions
-+ */
-+static int snd_at73c213_ssc_init(struct snd_at73c213 *chip)
-+{
-+ /*
-+ * Continuous clock output.
-+ * Starts on falling TF.
-+ * Delay 1 cycle (1 bit).
-+ * Periode is 16 bit (16 - 1).
-+ */
-+ ssc_writel(chip->ssc->regs, TCMR,
-+ SSC_BF(TCMR_CKO, 1)
-+ | SSC_BF(TCMR_START, 4)
-+ | SSC_BF(TCMR_STTDLY, 1)
-+ | SSC_BF(TCMR_PERIOD, 16 - 1));
-+ /*
-+ * Data length is 16 bit (16 - 1).
-+ * Transmit MSB first.
-+ * Transmit 2 words each transfer.
-+ * Frame sync length is 16 bit (16 - 1).
-+ * Frame starts on negative pulse.
-+ */
-+ ssc_writel(chip->ssc->regs, TFMR,
-+ SSC_BF(TFMR_DATLEN, 16 - 1)
-+ | SSC_BIT(TFMR_MSBF)
-+ | SSC_BF(TFMR_DATNB, 1)
-+ | SSC_BF(TFMR_FSLEN, 16 - 1)
-+ | SSC_BF(TFMR_FSOS, 1));
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
-+{
-+ int retval;
-+ unsigned char dac_ctrl = 0;
-+
-+ retval = snd_at73c213_set_bitrate(chip);
-+ if (retval)
-+ goto out;
-+
-+ /* Enable DAC master clock. */
-+ clk_enable(chip->board->dac_clk);
-+
-+ /* Initialize at73c213 on SPI bus. */
-+ retval = snd_at73c213_write_reg(chip, DAC_RST, 0x04);
-+ if (retval)
-+ goto out_clk;
-+ msleep(1);
-+ retval = snd_at73c213_write_reg(chip, DAC_RST, 0x03);
-+ if (retval)
-+ goto out_clk;
-+
-+ /* Precharge everything. */
-+ retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0xff);
-+ if (retval)
-+ goto out_clk;
-+ retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APAPRECH));
-+ if (retval)
-+ goto out_clk;
-+ retval = snd_at73c213_write_reg(chip, DAC_CTRL,
-+ (1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR));
-+ if (retval)
-+ goto out_clk;
-+
-+ msleep(50);
-+
-+ /* Stop precharging PA. */
-+ retval = snd_at73c213_write_reg(chip, PA_CTRL,
-+ (1<<PA_CTRL_APALP) | 0x0f);
-+ if (retval)
-+ goto out_clk;
-+
-+ msleep(450);
-+
-+ /* Stop precharging DAC, turn on master power. */
-+ retval = snd_at73c213_write_reg(chip, DAC_PRECH, (1<<DAC_PRECH_ONMSTR));
-+ if (retval)
-+ goto out_clk;
-+
-+ msleep(1);
-+
-+ /* Turn on DAC. */
-+ dac_ctrl = (1<<DAC_CTRL_ONDACL) | (1<<DAC_CTRL_ONDACR)
-+ | (1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR);
-+
-+ retval = snd_at73c213_write_reg(chip, DAC_CTRL, dac_ctrl);
-+ if (retval)
-+ goto out_clk;
-+
-+ /* Mute sound. */
-+ retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
-+ if (retval)
-+ goto out_clk;
-+ retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
-+ if (retval)
-+ goto out_clk;
-+ retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
-+ if (retval)
-+ goto out_clk;
-+ retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
-+ if (retval)
-+ goto out_clk;
-+ retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
-+ if (retval)
-+ goto out_clk;
-+ retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
-+ if (retval)
-+ goto out_clk;
-+ retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
-+ if (retval)
-+ goto out_clk;
-+
-+ /* Enable I2S device, i.e. clock output. */
-+ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
-+
-+ goto out;
-+
-+out_clk:
-+ clk_disable(chip->board->dac_clk);
-+out:
-+ return retval;
-+}
-+
-+static int snd_at73c213_dev_free(struct snd_device *device)
-+{
-+ struct snd_at73c213 *chip = device->device_data;
-+
-+ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
-+ if (chip->irq >= 0) {
-+ free_irq(chip->irq, chip);
-+ chip->irq = -1;
-+ }
-+
-+ return 0;
-+}
++static struct i2c_adapter pca_i2c_ops = {
++ .owner = THIS_MODULE,
++ .id = I2C_HW_A_PLAT,
++ .algo_data = &pca_i2c_data,
++ .name = "PCA9564",
++ .class = I2C_CLASS_HWMON,
++};
+
-+static int __devinit snd_at73c213_dev_init(struct snd_card *card,
-+ struct spi_device *spi)
++static int __devinit pca_i2c_probe(struct platform_device *pdev)
+{
-+ static struct snd_device_ops ops = {
-+ .dev_free = snd_at73c213_dev_free,
-+ };
-+ struct snd_at73c213 *chip = get_chip(card);
-+ int irq, retval;
-+
-+ irq = chip->ssc->irq;
-+ if (irq < 0)
-+ return irq;
-+
-+ spin_lock_init(&chip->lock);
-+ chip->card = card;
-+ chip->irq = -1;
-+
-+ retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip);
-+ if (retval) {
-+ dev_dbg(&chip->spi->dev, "unable to request irq %d\n", irq);
-+ goto out;
-+ }
-+ chip->irq = irq;
-+
-+ memcpy(&chip->reg_image, &snd_at73c213_original_image,
-+ sizeof(snd_at73c213_original_image));
-+
-+ retval = snd_at73c213_ssc_init(chip);
-+ if (retval)
-+ goto out_irq;
-+
-+ retval = snd_at73c213_chip_init(chip);
-+ if (retval)
-+ goto out_irq;
-+
-+ retval = snd_at73c213_pcm_new(chip, 0);
-+ if (retval)
-+ goto out_irq;
-+
-+ retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
-+ if (retval)
-+ goto out_irq;
-+
-+ retval = snd_at73c213_mixer(chip);
-+ if (retval)
-+ goto out_snd_dev;
-+
-+ snd_card_set_dev(card, &spi->dev);
++ struct resource *res;
+
-+ goto out;
++ init_waitqueue_head(&pca_wait);
+
-+out_snd_dev:
-+ snd_device_free(card, chip);
-+out_irq:
-+ free_irq(chip->irq, chip);
-+ chip->irq = -1;
-+out:
-+ return retval;
-+}
-+
-+static int snd_at73c213_probe(struct spi_device *spi)
-+{
-+ struct snd_card *card;
-+ struct snd_at73c213 *chip;
-+ struct at73c213_board_info *board;
-+ int retval;
-+ char id[16];
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res)
++ return -ENODEV;
+
-+ board = spi->dev.platform_data;
-+ if (!board) {
-+ dev_dbg(&spi->dev, "no platform_data\n");
++ if (!request_mem_region(res->start, PCA_IO_SIZE, "PCA9564"))
+ return -ENXIO;
-+ }
+
-+ if (!board->dac_clk) {
-+ dev_dbg(&spi->dev, "no DAC clk\n");
-+ return -ENXIO;
-+ }
++ base_addr = ioremap(res->start, PCA_IO_SIZE);
++ if (base_addr == NULL)
++ goto out_region;
+
-+ if (IS_ERR(board->dac_clk)) {
-+ dev_dbg(&spi->dev, "no DAC clk\n");
-+ return PTR_ERR(board->dac_clk);
++ irq = platform_get_irq(pdev, 0);
++ if (irq > -1) {
++ if (request_irq(irq, pca_handler, 0, "pca9564", NULL) < 0) {
++ printk(KERN_ERR "i2c-pca: Request irq%d failed\n", irq);
++ goto out_remap;
++ }
+ }
+
-+ retval = -ENOMEM;
-+
-+ /* Allocate "card" using some unused identifiers. */
-+ snprintf(id, sizeof id, "at73c213_%d", board->ssc_id);
-+ card = snd_card_new(-1, id, THIS_MODULE, sizeof(struct snd_at73c213));
-+ if (!card)
-+ goto out;
++ /* set up the driverfs linkage to our parent device */
++ pca_i2c_ops.dev.parent = &pdev->dev;
+
-+ chip = card->private_data;
-+ chip->spi = spi;
-+ chip->board = board;
-+
-+ chip->ssc = ssc_request(board->ssc_id);
-+ if (IS_ERR(chip->ssc)) {
-+ dev_dbg(&spi->dev, "could not get ssc%d device\n",
-+ board->ssc_id);
-+ retval = PTR_ERR(chip->ssc);
-+ goto out_card;
++ if (i2c_pca_add_bus(&pca_i2c_ops) < 0) {
++ printk(KERN_ERR "i2c-pca: Failed to add i2c bus\n");
++ goto out_irq;
+ }
+
-+ retval = snd_at73c213_dev_init(card, spi);
-+ if (retval)
-+ goto out_ssc;
-+
-+ strcpy(card->driver, "at73c213");
-+ strcpy(card->shortname, board->shortname);
-+ sprintf(card->longname, "%s on irq %d", card->shortname, chip->irq);
-+
-+ retval = snd_card_register(card);
-+ if (retval)
-+ goto out_ssc;
-+
-+ dev_set_drvdata(&spi->dev, card);
-+
-+ goto out;
-+
-+out_ssc:
-+ ssc_free(chip->ssc);
-+out_card:
-+ snd_card_free(card);
-+out:
-+ return retval;
-+}
-+
-+static int __devexit snd_at73c213_remove(struct spi_device *spi)
-+{
-+ struct snd_card *card = dev_get_drvdata(&spi->dev);
-+ struct snd_at73c213 *chip = card->private_data;
-+ int retval;
-+
-+ /* Stop playback. */
-+ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
-+
-+ /* Mute sound. */
-+ retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
-+ if (retval)
-+ goto out;
-+ retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
-+ if (retval)
-+ goto out;
-+ retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
-+ if (retval)
-+ goto out;
-+ retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
-+ if (retval)
-+ goto out;
-+ retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
-+ if (retval)
-+ goto out;
-+ retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
-+ if (retval)
-+ goto out;
-+ retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
-+ if (retval)
-+ goto out;
-+
-+ /* Turn off PA. */
-+ retval = snd_at73c213_write_reg(chip, PA_CTRL, (chip->reg_image[PA_CTRL]|0x0f));
-+ if (retval)
-+ goto out;
-+ msleep(10);
-+ retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0f);
-+ if (retval)
-+ goto out;
-+
-+ /* Turn off external DAC. */
-+ retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x0c);
-+ if (retval)
-+ goto out;
-+ msleep(2);
-+ retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x00);
-+ if (retval)
-+ goto out;
-+
-+ /* Turn off master power. */
-+ retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0x00);
-+ if (retval)
-+ goto out;
++ return 0;
+
-+out:
-+ /* Stop DAC master clock. */
-+ clk_disable(chip->board->dac_clk);
++ out_irq:
++ if (irq > -1)
++ free_irq(irq, &pca_i2c_ops);
+
-+ ssc_free(chip->ssc);
-+ snd_card_free(card);
-+ dev_set_drvdata(&spi->dev, NULL);
++ out_remap:
++ iounmap(base_addr);
+
-+ return 0;
++ out_region:
++ release_mem_region(res->start, PCA_IO_SIZE);
++ return -ENODEV;
+}
+
-+#ifdef CONFIG_PM
-+static int snd_at73c213_suspend(struct spi_device *spi, pm_message_t msg)
++static int __devexit pca_i2c_remove(struct platform_device *pdev)
+{
-+ struct snd_card *card = dev_get_drvdata(&spi->dev);
-+ struct snd_at73c213 *chip = card->private_data;
++ struct resource *res;
+
-+ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
-+ clk_disable(chip->board->dac_clk);
++ i2c_del_adapter(&pca_i2c_ops);
+
-+ return 0;
-+}
++ if (irq > 0)
++ free_irq(irq, NULL);
+
-+static int snd_at73c213_resume(struct spi_device *spi)
-+{
-+ struct snd_card *card = dev_get_drvdata(&spi->dev);
-+ struct snd_at73c213 *chip = card->private_data;
++ iounmap(base_addr);
+
-+ clk_enable(chip->board->dac_clk);
-+ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ release_mem_region(res->start, PCA_IO_SIZE);
+
+ return 0;
+}
-+#else
-+#define snd_at73c213_suspend NULL
-+#define snd_at73c213_resume NULL
-+#endif
+
-+static struct spi_driver at73c213_driver = {
++static struct platform_driver pca_i2c_driver = {
++ .probe = pca_i2c_probe,
++ .remove = __devexit_p(pca_i2c_remove),
+ .driver = {
-+ .name = "at73c213",
++ .name = "pca9564",
++ .owner = THIS_MODULE,
+ },
-+ .probe = snd_at73c213_probe,
-+ .suspend = snd_at73c213_suspend,
-+ .resume = snd_at73c213_resume,
-+ .remove = __devexit_p(snd_at73c213_remove),
+};
+
-+static int __init at73c213_init(void)
++static int __init pca_i2c_init(void)
+{
-+ return spi_register_driver(&at73c213_driver);
++ return platform_driver_register(&pca_i2c_driver);
+}
-+module_init(at73c213_init);
+
-+static void __exit at73c213_exit(void)
++static void __exit pca_i2c_exit(void)
+{
-+ spi_unregister_driver(&at73c213_driver);
++ platform_driver_unregister(&pca_i2c_driver);
+}
-+module_exit(at73c213_exit);
+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Sound driver for AT73C213 with Atmel SSC");
-+MODULE_LICENSE("GPL");
-diff --git a/sound/spi/at73c213.h b/sound/spi/at73c213.h
-new file mode 100644
-index 0000000..fd8b372
---- /dev/null
-+++ b/sound/spi/at73c213.h
-@@ -0,0 +1,119 @@
-+/*
-+ * Driver for the AT73C213 16-bit stereo DAC on Atmel ATSTK1000
-+ *
-+ * Copyright (C) 2006 - 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+ * 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this
-+ * distribution in the file called COPYING.
-+ */
-+
-+#ifndef _SND_AT73C213_H
-+#define _SND_AT73C213_H
-+
-+/* DAC control register */
-+#define DAC_CTRL 0x00
-+#define DAC_CTRL_ONPADRV 7
-+#define DAC_CTRL_ONAUXIN 6
-+#define DAC_CTRL_ONDACR 5
-+#define DAC_CTRL_ONDACL 4
-+#define DAC_CTRL_ONLNOR 3
-+#define DAC_CTRL_ONLNOL 2
-+#define DAC_CTRL_ONLNIR 1
-+#define DAC_CTRL_ONLNIL 0
-+
-+/* DAC left line in gain register */
-+#define DAC_LLIG 0x01
-+#define DAC_LLIG_LLIG 0
-+
-+/* DAC right line in gain register */
-+#define DAC_RLIG 0x02
-+#define DAC_RLIG_RLIG 0
++module_init(pca_i2c_init);
++module_exit(pca_i2c_exit);
+
-+/* DAC Left Master Playback Gain Register */
-+#define DAC_LMPG 0x03
-+#define DAC_LMPG_LMPG 0
-+
-+/* DAC Right Master Playback Gain Register */
-+#define DAC_RMPG 0x04
-+#define DAC_RMPG_RMPG 0
-+
-+/* DAC Left Line Out Gain Register */
-+#define DAC_LLOG 0x05
-+#define DAC_LLOG_LLOG 0
-+
-+/* DAC Right Line Out Gain Register */
-+#define DAC_RLOG 0x06
-+#define DAC_RLOG_RLOG 0
-+
-+/* DAC Output Level Control Register */
-+#define DAC_OLC 0x07
-+#define DAC_OLC_RSHORT 7
-+#define DAC_OLC_ROLC 4
-+#define DAC_OLC_LSHORT 3
-+#define DAC_OLC_LOLC 0
-+
-+/* DAC Mixer Control Register */
-+#define DAC_MC 0x08
-+#define DAC_MC_INVR 5
-+#define DAC_MC_INVL 4
-+#define DAC_MC_RMSMIN2 3
-+#define DAC_MC_RMSMIN1 2
-+#define DAC_MC_LMSMIN2 1
-+#define DAC_MC_LMSMIN1 0
-+
-+/* DAC Clock and Sampling Frequency Control Register */
-+#define DAC_CSFC 0x09
-+#define DAC_CSFC_OVRSEL 4
-+
-+/* DAC Miscellaneous Register */
-+#define DAC_MISC 0x0A
-+#define DAC_MISC_VCMCAPSEL 7
-+#define DAC_MISC_DINTSEL 4
-+#define DAC_MISC_DITHEN 3
-+#define DAC_MISC_DEEMPEN 2
-+#define DAC_MISC_NBITS 0
-+
-+/* DAC Precharge Control Register */
-+#define DAC_PRECH 0x0C
-+#define DAC_PRECH_PRCHGPDRV 7
-+#define DAC_PRECH_PRCHGAUX1 6
-+#define DAC_PRECH_PRCHGLNOR 5
-+#define DAC_PRECH_PRCHGLNOL 4
-+#define DAC_PRECH_PRCHGLNIR 3
-+#define DAC_PRECH_PRCHGLNIL 2
-+#define DAC_PRECH_PRCHG 1
-+#define DAC_PRECH_ONMSTR 0
-+
-+/* DAC Auxiliary Input Gain Control Register */
-+#define DAC_AUXG 0x0D
-+#define DAC_AUXG_AUXG 0
-+
-+/* DAC Reset Register */
-+#define DAC_RST 0x10
-+#define DAC_RST_RESMASK 2
-+#define DAC_RST_RESFILZ 1
-+#define DAC_RST_RSTZ 0
-+
-+/* Power Amplifier Control Register */
-+#define PA_CTRL 0x11
-+#define PA_CTRL_APAON 6
-+#define PA_CTRL_APAPRECH 5
-+#define PA_CTRL_APALP 4
-+#define PA_CTRL_APAGAIN 0
-+
-+#endif /* _SND_AT73C213_H */
++MODULE_AUTHOR("Andrew Victor");
++MODULE_DESCRIPTION("PCA9564 platform driver");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.22.1/drivers/i2c/busses/i2c-at91.c
+===================================================================
+--- linux-2.6.22.1/drivers/i2c/busses/i2c-at91.c (revision 1)
++++ linux-2.6.22.1/drivers/i2c/busses/i2c-at91.c (arbetskopia)
+@@ -31,8 +31,11 @@
+ #include <asm/arch/board.h>
+ #include <asm/arch/cpu.h>
+
+-#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */
+
++/* Clockrate is configurable - max 400 Kbits/sec */
++static unsigned int clockrate = CONFIG_I2C_AT91_CLOCKRATE;
++module_param(clockrate, uint, 0);
++MODULE_PARM_DESC(clockrate, "The TWI clockrate");
+
+ static struct clk *twi_clk;
+ static void __iomem *twi_base;
+@@ -53,7 +56,7 @@
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */
+
+ /* Calcuate clock dividers */
+- cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3;
++ cdiv = (clk_get_rate(twi_clk) / (2 * clockrate)) - 3;
+ cdiv = cdiv + 1; /* round up */
+ ckdiv = 0;
+ while (cdiv > 255) {
+@@ -61,11 +64,12 @@
+ cdiv = cdiv >> 1;
+ }
+
+- if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */
+- if (ckdiv > 5) {
+- printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n");
+- ckdiv = 5;
+- }
++ if (cpu_is_at91rm9200() && (ckdiv > 5)) { /* AT91RM9200 Errata #22 */
++ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
++ ckdiv = 5;
++ } else if (ckdiv > 7) {
++ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
++ ckdiv = 7;
+ }
+
+ at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
diff --git a/target/device/Atmel/linux/kernel-patches-2.6.22.1/linux-2.6.22.1-005-atags-support.patch b/target/device/Atmel/linux/kernel-patches-2.6.22.1/linux-2.6.22.1-005-atags-support.patch
new file mode 100644
index 000000000..0068ef17c
--- /dev/null
+++ b/target/device/Atmel/linux/kernel-patches-2.6.22.1/linux-2.6.22.1-005-atags-support.patch
@@ -0,0 +1,122 @@
+--- linux-2.6.22/arch/arm/kernel/head-common.S 2007-05-16 10:13:04.000000000 -0500
++++ linux-2.6.22-bgat/arch/arm/kernel/head-common.S 2007-05-30 21:54:45.000000000 -0500
+@@ -20,7 +20,8 @@
+ .long _end @ r7
+ .long processor_id @ r4
+ .long __machine_arch_type @ r5
+- .long cr_alignment @ r6
++ .long __atags_pointer @ r6
++ .long cr_alignment @ r7
+ .long init_thread_union + THREAD_START_SP @ sp
+
+ /*
+@@ -29,6 +30,7 @@
+ *
+ * r0 = cp#15 control register
+ * r1 = machine ID
++ * r2 = atags pointer
+ * r9 = processor ID
+ */
+ .type __mmap_switched, %function
+@@ -47,11 +49,12 @@
+ strcc fp, [r6],#4
+ bcc 1b
+
+- ldmia r3, {r4, r5, r6, sp}
++ ldmia r3, {r4, r5, r6, r7, sp}
+ str r9, [r4] @ Save processor ID
+ str r1, [r5] @ Save machine type
++ str r2, [r6] @ Save atags pointer
+ bic r4, r0, #CR_A @ Clear 'A' bit
+- stmia r6, {r0, r4} @ Save control register values
++ stmia r7, {r0, r4} @ Save control register values
+ b start_kernel
+
+ /*
+@@ -215,3 +218,34 @@
+ bl __lookup_machine_type
+ mov r0, r5
+ ldmfd sp!, {r4 - r6, pc}
++
++/* Determine validity of the r2 atags pointer. The heuristic requires
++ * that the pointer be aligned, in the first 16k of physical RAM and
++ * that the ATAG_CORE marker is first and present. Future revisions
++ * of this function may be more lenient with the physical address and
++ * may also be able to move the ATAGS block if necessary.
++ *
++ * r8 = machinfo
++ *
++ * Returns:
++ * r2 either valid atags pointer, or zero
++ * r5, r6 corrupted
++ */
++
++ .type __vet_atags, %function
++__vet_atags:
++ tst r2, #0x3 @ aligned?
++ bne 1f
++
++ ldr r5, [r2, #0] @ is first tag ATAG_CORE?
++ subs r5, r5, #ATAG_CORE_SIZE
++ bne 1f
++ ldr r5, [r2, #4]
++ ldr r6, =ATAG_CORE
++ cmp r5, r6
++ bne 1f
++
++ mov pc, lr @ atag pointer is ok
++
++1: mov r2, #0
++ mov pc, lr
+--- linux-2.6.22/arch/arm/kernel/head.S 2007-05-30 08:29:34.000000000 -0500
++++ linux-2.6.22-bgat/arch/arm/kernel/head.S 2007-05-30 22:05:53.000000000 -0500
+@@ -29,6 +29,10 @@
+ #define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET)
+ #define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET)
+
++#define ATAG_CORE 0x54410001
++#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
++
++
+ /*
+ * swapper_pg_dir is the virtual address of the initial page table.
+ * We place the page tables 16K below KERNEL_RAM_VADDR. Therefore, we must
+@@ -61,7 +65,7 @@
+ *
+ * This is normally called from the decompressor code. The requirements
+ * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
+- * r1 = machine nr.
++ * r1 = machine nr, r2 = atags pointer.
+ *
+ * This code is mostly position independent, so if you link the kernel at
+ * 0xc0008000, you call this at __pa(0xc0008000).
+@@ -85,6 +89,7 @@
+ bl __lookup_machine_type @ r5=machinfo
+ movs r8, r5 @ invalid machine (r5=0)?
+ beq __error_a @ yes, error 'a'
++ bl __vet_atags
+ bl __create_page_tables
+
+ /*
+--- linux-2.6.22/arch/arm/kernel/setup.c 2007-05-30 08:29:34.000000000 -0500
++++ linux-2.6.22-bgat/arch/arm/kernel/setup.c 2007-05-30 22:07:08.000000000 -0500
+@@ -63,6 +63,8 @@
+ unsigned int __machine_arch_type;
+ EXPORT_SYMBOL(__machine_arch_type);
+
++unsigned int __atags_pointer __initdata;
++
+ unsigned int system_rev;
+ EXPORT_SYMBOL(system_rev);
+
+@@ -780,7 +782,9 @@
+ if (mdesc->soft_reboot)
+ reboot_setup("s");
+
+- if (mdesc->boot_params)
++ if (__atags_pointer)
++ tags = phys_to_virt(__atags_pointer);
++ else if (mdesc->boot_params)
+ tags = phys_to_virt(mdesc->boot_params);
+
+ /*